Land surface Verification Toolkit (LVT)

Science.gov (United States)

Kumar, Sujay V.

2017-01-01

LVT is a framework developed to provide an automated, consolidated environment for systematic land surface model evaluation Includes support for a range of in-situ, remote-sensing and other model and reanalysis products. Supports the analysis of outputs from various LIS subsystems, including LIS-DA, LIS-OPT, LIS-UE. Note: The Land Information System Verification Toolkit (LVT) is a NASA software tool designed to enable the evaluation, analysis and comparison of outputs generated by the Land Information System (LIS). The LVT software is released under the terms and conditions of the NASA Open Source Agreement (NOSA) Version 1.1 or later. Land Information System Verification Toolkit (LVT) NOSA.

Development of a System Analysis Toolkit for Sensitivity Analysis, Uncertainty Propagation, and Estimation of Parameter Distribution

International Nuclear Information System (INIS)

Heo, Jaeseok; Kim, Kyung Doo

2015-01-01

Statistical approaches to uncertainty quantification and sensitivity analysis are very important in estimating the safety margins for an engineering design application. This paper presents a system analysis and optimization toolkit developed by Korea Atomic Energy Research Institute (KAERI), which includes multiple packages of the sensitivity analysis and uncertainty quantification algorithms. In order to reduce the computing demand, multiple compute resources including multiprocessor computers and a network of workstations are simultaneously used. A Graphical User Interface (GUI) was also developed within the parallel computing framework for users to readily employ the toolkit for an engineering design and optimization problem. The goal of this work is to develop a GUI framework for engineering design and scientific analysis problems by implementing multiple packages of system analysis methods in the parallel computing toolkit. This was done by building an interface between an engineering simulation code and the system analysis software packages. The methods and strategies in the framework were designed to exploit parallel computing resources such as those found in a desktop multiprocessor workstation or a network of workstations. Available approaches in the framework include statistical and mathematical algorithms for use in science and engineering design problems. Currently the toolkit has 6 modules of the system analysis methodologies: deterministic and probabilistic approaches of data assimilation, uncertainty propagation, Chi-square linearity test, sensitivity analysis, and FFTBM

Development of a System Analysis Toolkit for Sensitivity Analysis, Uncertainty Propagation, and Estimation of Parameter Distribution

Energy Technology Data Exchange (ETDEWEB)

Heo, Jaeseok; Kim, Kyung Doo [KAERI, Daejeon (Korea, Republic of)

2015-05-15

Statistical approaches to uncertainty quantification and sensitivity analysis are very important in estimating the safety margins for an engineering design application. This paper presents a system analysis and optimization toolkit developed by Korea Atomic Energy Research Institute (KAERI), which includes multiple packages of the sensitivity analysis and uncertainty quantification algorithms. In order to reduce the computing demand, multiple compute resources including multiprocessor computers and a network of workstations are simultaneously used. A Graphical User Interface (GUI) was also developed within the parallel computing framework for users to readily employ the toolkit for an engineering design and optimization problem. The goal of this work is to develop a GUI framework for engineering design and scientific analysis problems by implementing multiple packages of system analysis methods in the parallel computing toolkit. This was done by building an interface between an engineering simulation code and the system analysis software packages. The methods and strategies in the framework were designed to exploit parallel computing resources such as those found in a desktop multiprocessor workstation or a network of workstations. Available approaches in the framework include statistical and mathematical algorithms for use in science and engineering design problems. Currently the toolkit has 6 modules of the system analysis methodologies: deterministic and probabilistic approaches of data assimilation, uncertainty propagation, Chi-square linearity test, sensitivity analysis, and FFTBM.

Tribal Green Building Toolkit

Science.gov (United States)

This Tribal Green Building Toolkit (Toolkit) is designed to help tribal officials, community members, planners, developers, and architects develop and adopt building codes to support green building practices. Anyone can use this toolkit!

A software toolkit for implementing low-cost virtual reality training systems

International Nuclear Information System (INIS)

Louka, Michael N.

1999-04-01

VR is a powerful technology for implementing training systems but better tools are needed to achieve wider usage and acceptance for desktop computer-based training applications. A need has been identified for a software tool kit to support the efficient implementation of well-structured desktop VR training systems. A powerful toolkit for implementing scalable low-cost VR training applications is described in this report (author) (ml)

Developing Mixed Reality Educational Applications: The Virtual Touch Toolkit.

Science.gov (United States)

Mateu, Juan; Lasala, María José; Alamán, Xavier

2015-08-31

In this paper, we present Virtual Touch, a toolkit that allows the development of educational activities through a mixed reality environment such that, using various tangible elements, the interconnection of a virtual world with the real world is enabled. The main goal of Virtual Touch is to facilitate the installation, configuration and programming of different types of technologies, abstracting the creator of educational applications from the technical details involving the use of tangible interfaces and virtual worlds. Therefore, it is specially designed to enable teachers to themselves create educational activities for their students in a simple way, taking into account that teachers generally lack advanced knowledge in computer programming and electronics. The toolkit has been used to develop various educational applications that have been tested in two secondary education high schools in Spain.

Developing Mixed Reality Educational Applications: The Virtual Touch Toolkit

Science.gov (United States)

Mateu, Juan; Lasala, María José; Alamán, Xavier

2015-01-01

In this paper, we present Virtual Touch, a toolkit that allows the development of educational activities through a mixed reality environment such that, using various tangible elements, the interconnection of a virtual world with the real world is enabled. The main goal of Virtual Touch is to facilitate the installation, configuration and programming of different types of technologies, abstracting the creator of educational applications from the technical details involving the use of tangible interfaces and virtual worlds. Therefore, it is specially designed to enable teachers to themselves create educational activities for their students in a simple way, taking into account that teachers generally lack advanced knowledge in computer programming and electronics. The toolkit has been used to develop various educational applications that have been tested in two secondary education high schools in Spain. PMID:26334275

A toolkit for computerized operating procedure of complex industrial systems with IVI-COM technology

International Nuclear Information System (INIS)

Zhou Yangping; Dong Yujie; Huang Xiaojing; Ye Jingliang; Yoshikawa, Hidekazu

2013-01-01

A human interface toolkit is proposed to help the user develop computerized operating procedure of complex industrial system such as Nuclear Power Plants (NPPs). Coupled with a friendly graphical interface, this integrated tool includes a database, a procedure editor and a procedure executor. A three layer hierarchy is adopted to express the complexity of operating procedure, which includes mission, process and node. There are 10 kinds of node: entrance, exit, hint, manual input, detector, actuator, data treatment, branch, judgment and plug-in. The computerized operating procedure will sense and actuate the actual industrial systems with the interface based on IVI-COM (Interchangeable Virtual Instrumentation-Component Object Model) technology. A prototype system of this human interface toolkit has been applied to develop a simple computerized operating procedure for a simulated NPP. (author)

OpenDBDDAS Toolkit: Secure MapReduce and Hadoop-like Systems

KAUST Repository

Fabiano, Enrico

2015-06-01

The OpenDBDDAS Toolkit is a software framework to provide support for more easily creating and expanding dynamic big data-driven application systems (DBDDAS) that are common in environmental systems, many engineering applications, disaster management, traffic management, and manufacturing. In this paper, we describe key features needed to implement a secure MapReduce and Hadoop-like system for high performance clusters that guarantees a certain level of privacy of data from other concurrent users of the system. We also provide examples of a secure MapReduce prototype and compare it to another high performance MapReduce, MR-MPI.

Developing Mixed Reality Educational Applications: The Virtual Touch Toolkit

Directory of Open Access Journals (Sweden)

Juan Mateu

2015-08-01

Full Text Available In this paper, we present Virtual Touch, a toolkit that allows the development of educational activities through a mixed reality environment such that, using various tangible elements, the interconnection of a virtual world with the real world is enabled. The main goal of Virtual Touch is to facilitate the installation, configuration and programming of different types of technologies, abstracting the creator of educational applications from the technical details involving the use of tangible interfaces and virtual worlds. Therefore, it is specially designed to enable teachers to themselves create educational activities for their students in a simple way, taking into account that teachers generally lack advanced knowledge in computer programming and electronics. The toolkit has been used to develop various educational applications that have been tested in two secondary education high schools in Spain.

A Statistical Toolkit for Data Analysis

International Nuclear Information System (INIS)

Donadio, S.; Guatelli, S.; Mascialino, B.; Pfeiffer, A.; Pia, M.G.; Ribon, A.; Viarengo, P.

2006-01-01

The present project aims to develop an open-source and object-oriented software Toolkit for statistical data analysis. Its statistical testing component contains a variety of Goodness-of-Fit tests, from Chi-squared to Kolmogorov-Smirnov, to less known, but generally much more powerful tests such as Anderson-Darling, Goodman, Fisz-Cramer-von Mises, Kuiper, Tiku. Thanks to the component-based design and the usage of the standard abstract interfaces for data analysis, this tool can be used by other data analysis systems or integrated in experimental software frameworks. This Toolkit has been released and is downloadable from the web. In this paper we describe the statistical details of the algorithms, the computational features of the Toolkit and describe the code validation

A Geospatial Decision Support System Toolkit, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — We propose to build and commercialize a working prototype Geospatial Decision Support Toolkit (GeoKit). GeoKit will enable scientists, agencies, and stakeholders to...

The Medical Imaging Interaction Toolkit: challenges and advances : 10 years of open-source development.

Science.gov (United States)

Nolden, Marco; Zelzer, Sascha; Seitel, Alexander; Wald, Diana; Müller, Michael; Franz, Alfred M; Maleike, Daniel; Fangerau, Markus; Baumhauer, Matthias; Maier-Hein, Lena; Maier-Hein, Klaus H; Meinzer, Hans-Peter; Wolf, Ivo

2013-07-01

The Medical Imaging Interaction Toolkit (MITK) has been available as open-source software for almost 10 years now. In this period the requirements of software systems in the medical image processing domain have become increasingly complex. The aim of this paper is to show how MITK evolved into a software system that is able to cover all steps of a clinical workflow including data retrieval, image analysis, diagnosis, treatment planning, intervention support, and treatment control. MITK provides modularization and extensibility on different levels. In addition to the original toolkit, a module system, micro services for small, system-wide features, a service-oriented architecture based on the Open Services Gateway initiative (OSGi) standard, and an extensible and configurable application framework allow MITK to be used, extended and deployed as needed. A refined software process was implemented to deliver high-quality software, ease the fulfillment of regulatory requirements, and enable teamwork in mixed-competence teams. MITK has been applied by a worldwide community and integrated into a variety of solutions, either at the toolkit level or as an application framework with custom extensions. The MITK Workbench has been released as a highly extensible and customizable end-user application. Optional support for tool tracking, image-guided therapy, diffusion imaging as well as various external packages (e.g. CTK, DCMTK, OpenCV, SOFA, Python) is available. MITK has also been used in several FDA/CE-certified applications, which demonstrates the high-quality software and rigorous development process. MITK provides a versatile platform with a high degree of modularization and interoperability and is well suited to meet the challenging tasks of today's and tomorrow's clinically motivated research.

Implementing a user-driven online quality improvement toolkit for cancer care.

Science.gov (United States)

Luck, Jeff; York, Laura S; Bowman, Candice; Gale, Randall C; Smith, Nina; Asch, Steven M

2015-05-01

Peer-to-peer collaboration within integrated health systems requires a mechanism for sharing quality improvement lessons. The Veterans Health Administration (VA) developed online compendia of tools linked to specific cancer quality indicators. We evaluated awareness and use of the toolkits, variation across facilities, impact of social marketing, and factors influencing toolkit use. A diffusion of innovations conceptual framework guided the collection of user activity data from the Toolkit Series SharePoint site and an online survey of potential Lung Cancer Care Toolkit users. The VA Toolkit Series site had 5,088 unique visitors in its first 22 months; 5% of users accounted for 40% of page views. Social marketing communications were correlated with site usage. Of survey respondents (n = 355), 54% had visited the site, of whom 24% downloaded at least one tool. Respondents' awareness of the lung cancer quality performance of their facility, and facility participation in quality improvement collaboratives, were positively associated with Toolkit Series site use. Facility-level lung cancer tool implementation varied widely across tool types. The VA Toolkit Series achieved widespread use and a high degree of user engagement, although use varied widely across facilities. The most active users were aware of and active in cancer care quality improvement. Toolkit use seemed to be reinforced by other quality improvement activities. A combination of user-driven tool creation and centralized toolkit development seemed to be effective for leveraging health information technology to spread disease-specific quality improvement tools within an integrated health care system. Copyright © 2015 by American Society of Clinical Oncology.

HLT configuration management system

CERN Document Server

Daponte, Vincenzo

2015-01-01

The CMS High Level Trigger (HLT) is implemented running a streamlined version of the CMS offline reconstruction software running on thousands of CPUs. The CMS software is written mostly in C++, using Python as its configuration language through an embedded CPython interpreter. The configuration of each process is made up of hundreds of modules, organized in sequences and paths. As an example, the HLT configurations used for 2011 data taking comprised over 2200 different modules, organized in more than 400 independent trigger paths. The complexity of the HLT configurations and the large number of configuration produced require the design of a suitable data management system. The present work describes the designed solution to manage the considerable number of configurations developed and to assist the editing of new configurations. The system is required to be remotely accessible and OS-independent as well as easly maintainable easy to use. To meet these requirements a three-layers architecture has been choose...

Device configuration-management system

International Nuclear Information System (INIS)

Nowell, D.M.

1981-01-01

The Fusion Chamber System, a major component of the Magnetic Fusion Test Facility, contains several hundred devices which report status to the Supervisory Control and Diagnostic System for control and monitoring purposes. To manage the large number of diversity of devices represented, a device configuration management system was required and developed. Key components of this software tool include the MFTF Data Base; a configuration editor; and a tree structure defining the relationships between the subsystem devices. This paper will describe how the configuration system easily accomodates recognizing new devices, restructuring existing devices, and modifying device profile information

Building Management Information Systems to Coordinate Citywide Afterschool Programs: A Toolkit for Cities. Executive Summary

Science.gov (United States)

Kingsley, Chris

2012-01-01

This executive summary describes highlights from the report, "Building Management Information Systems to Coordinate Citywide Afterschool Programs: A Toolkit for Cities." City-led efforts to build coordinated systems of afterschool programming are an important strategy for improving the health, safety and academic preparedness of children…

Commercial Building Energy Saver: An energy retrofit analysis toolkit

International Nuclear Information System (INIS)

Hong, Tianzhen; Piette, Mary Ann; Chen, Yixing; Lee, Sang Hoon; Taylor-Lange, Sarah C.; Zhang, Rongpeng; Sun, Kaiyu; Price, Phillip

2015-01-01

Highlights: • Commercial Building Energy Saver is a powerful toolkit for energy retrofit analysis. • CBES provides benchmarking, load shape analysis, and model-based retrofit assessment. • CBES covers 7 building types, 6 vintages, 16 climates, and 100 energy measures. • CBES includes a web app, API, and a database of energy efficiency performance. • CBES API can be extended and integrated with third party energy software tools. - Abstract: Small commercial buildings in the United States consume 47% of the total primary energy of the buildings sector. Retrofitting small and medium commercial buildings poses a huge challenge for owners because they usually lack the expertise and resources to identify and evaluate cost-effective energy retrofit strategies. This paper presents the Commercial Building Energy Saver (CBES), an energy retrofit analysis toolkit, which calculates the energy use of a building, identifies and evaluates retrofit measures in terms of energy savings, energy cost savings and payback. The CBES Toolkit includes a web app (APP) for end users and the CBES Application Programming Interface (API) for integrating CBES with other energy software tools. The toolkit provides a rich set of features including: (1) Energy Benchmarking providing an Energy Star score, (2) Load Shape Analysis to identify potential building operation improvements, (3) Preliminary Retrofit Analysis which uses a custom developed pre-simulated database and, (4) Detailed Retrofit Analysis which utilizes real-time EnergyPlus simulations. CBES includes 100 configurable energy conservation measures (ECMs) that encompass IAQ, technical performance and cost data, for assessing 7 different prototype buildings in 16 climate zones in California and 6 vintages. A case study of a small office building demonstrates the use of the toolkit for retrofit analysis. The development of CBES provides a new contribution to the field by providing a straightforward and uncomplicated decision

Toolkit Design for Interactive Structured Graphics

National Research Council Canada - National Science Library

Bederson, Benjamin B; Grosjean, Jesse; Meyer, Jon

2003-01-01

.... We compare hand-crafted custom code to polylithic and monolithic toolkit-based solutions. Polylithic toolkits follow a design philosophy similar to 3D scene graphs supported by toolkits including Java3D and OpenInventor...

Development of a Tailored Methodology and Forensic Toolkit for Industrial Control Systems Incident Response

Science.gov (United States)

2014-06-01

for industrial control systems ,” in Proceedings of the VDE Kongress, 2004. [15] K. Stouffer et al., “Special publication 800-82: Guide to industrial...TAILORED METHODOLOGY AND FORENSIC TOOLKIT FOR INDUSTRIAL CONTROL SYSTEMS INCIDENT RESPONSE by Nicholas B. Carr June 2014 Thesis Co...CONTROL SYSTEMS INCIDENT RESPONSE 5. FUNDING NUMBERS 6. AUTHOR(S) Nicholas B. Carr 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval

Application experiences with the Globus toolkit.

Energy Technology Data Exchange (ETDEWEB)

Brunett, S.

1998-06-09

The Globus grid toolkit is a collection of software components designed to support the development of applications for high-performance distributed computing environments, or ''computational grids'' [14]. The Globus toolkit is an implementation of a ''bag of services'' architecture, which provides application and tool developers not with a monolithic system but rather with a set of stand-alone services. Each Globus component provides a basic service, such as authentication, resource allocation, information, communication, fault detection, and remote data access. Different applications and tools can combine these services in different ways to construct ''grid-enabled'' systems. The Globus toolkit has been used to construct the Globus Ubiquitous Supercomputing Testbed, or GUSTO: a large-scale testbed spanning 20 sites and included over 4000 compute nodes for a total compute power of over 2 TFLOPS. Over the past six months, we and others have used this testbed to conduct a variety of application experiments, including multi-user collaborative environments (tele-immersion), computational steering, distributed supercomputing, and high throughput computing. The goal of this paper is to review what has been learned from these experiments regarding the effectiveness of the toolkit approach. To this end, we describe two of the application experiments in detail, noting what worked well and what worked less well. The two applications are a distributed supercomputing application, SF-Express, in which multiple supercomputers are harnessed to perform large distributed interactive simulations; and a tele-immersion application, CAVERNsoft, in which the focus is on connecting multiple people to a distributed simulated world.

TRSkit: A Simple Digital Library Toolkit

Science.gov (United States)

Nelson, Michael L.; Esler, Sandra L.

1997-01-01

This paper introduces TRSkit, a simple and effective toolkit for building digital libraries on the World Wide Web. The toolkit was developed for the creation of the Langley Technical Report Server and the NASA Technical Report Server, but is applicable to most simple distribution paradigms. TRSkit contains a handful of freely available software components designed to be run under the UNIX operating system and served via the World Wide Web. The intended customer is the person that must continuously and synchronously distribute anywhere from 100 - 100,000's of information units and does not have extensive resources to devote to the problem.

PAGANI Toolkit: Parallel graph-theoretical analysis package for brain network big data.

Science.gov (United States)

Du, Haixiao; Xia, Mingrui; Zhao, Kang; Liao, Xuhong; Yang, Huazhong; Wang, Yu; He, Yong

2018-05-01

The recent collection of unprecedented quantities of neuroimaging data with high spatial resolution has led to brain network big data. However, a toolkit for fast and scalable computational solutions is still lacking. Here, we developed the PArallel Graph-theoretical ANalysIs (PAGANI) Toolkit based on a hybrid central processing unit-graphics processing unit (CPU-GPU) framework with a graphical user interface to facilitate the mapping and characterization of high-resolution brain networks. Specifically, the toolkit provides flexible parameters for users to customize computations of graph metrics in brain network analyses. As an empirical example, the PAGANI Toolkit was applied to individual voxel-based brain networks with ∼200,000 nodes that were derived from a resting-state fMRI dataset of 624 healthy young adults from the Human Connectome Project. Using a personal computer, this toolbox completed all computations in ∼27 h for one subject, which is markedly less than the 118 h required with a single-thread implementation. The voxel-based functional brain networks exhibited prominent small-world characteristics and densely connected hubs, which were mainly located in the medial and lateral fronto-parietal cortices. Moreover, the female group had significantly higher modularity and nodal betweenness centrality mainly in the medial/lateral fronto-parietal and occipital cortices than the male group. Significant correlations between the intelligence quotient and nodal metrics were also observed in several frontal regions. Collectively, the PAGANI Toolkit shows high computational performance and good scalability for analyzing connectome big data and provides a friendly interface without the complicated configuration of computing environments, thereby facilitating high-resolution connectomics research in health and disease. © 2018 Wiley Periodicals, Inc.

A Software Toolkit to Study Systematic Uncertainties of the Physics Models of the Geant4 Simulation Package

Science.gov (United States)

Genser, Krzysztof; Hatcher, Robert; Kelsey, Michael; Perdue, Gabriel; Wenzel, Hans; Wright, Dennis H.; Yarba, Julia

2017-10-01

The Geant4 simulation toolkit is used to model interactions between particles and matter. Geant4 employs a set of validated physics models that span a wide range of interaction energies. These models rely on measured cross-sections and phenomenological models with the physically motivated parameters that are tuned to cover many application domains. To study what uncertainties are associated with the Geant4 physics models we have designed and implemented a comprehensive, modular, user-friendly software toolkit that allows the variation of one or more parameters of one or more Geant4 physics models involved in simulation studies. It also enables analysis of multiple variants of the resulting physics observables of interest in order to estimate the uncertainties associated with the simulation model choices. Based on modern event-processing infrastructure software, the toolkit offers a variety of attractive features, e.g. flexible run-time configurable workflow, comprehensive bookkeeping, easy to expand collection of analytical components. Design, implementation technology, and key functionalities of the toolkit are presented in this paper and illustrated with selected results.

Business/Employers Influenza Toolkit

Centers for Disease Control (CDC) Podcasts

This podcast promotes the "Make It Your Business To Fight The Flu" toolkit for Businesses and Employers. The toolkit provides information and recommended strategies to help businesses and employers promote the seasonal flu vaccine. Additionally, employers will find flyers, posters, and other materials to post and distribute in the workplace.

Observed benefits from product configuration systems

DEFF Research Database (Denmark)

Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik

2013-01-01

This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... affected by the use of product configu-ration systems e.g. increased sales, decrease in the number of SKU's, improved ability to introduce new products, and cost reductions.......This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... processes, on-time delivery of the specifica-tions, and resource consumption for making specifications, quality of specifications, optimization of products and services, and other observations. The purpose of the study is partly to identify specific impacts observed from implementing product configuration...

Modelling toolkit for simulation of maglev devices

Science.gov (United States)

Peña-Roche, J.; Badía-Majós, A.

2017-01-01

A stand-alone App1 has been developed, focused on obtaining information about relevant engineering properties of magnetic levitation systems. Our modelling toolkit provides real time simulations of 2D magneto-mechanical quantities for superconductor (SC)/permanent magnet structures. The source code is open and may be customised for a variety of configurations. Ultimately, it relies on the variational statement of the critical state model for the superconducting component and has been verified against experimental data for YBaCuO/NdFeB assemblies. On a quantitative basis, the values of the arising forces, induced superconducting currents, as well as a plot of the magnetic field lines are displayed upon selection of an arbitrary trajectory of the magnet in the vicinity of the SC. The stability issues related to the cooling process, as well as the maximum attainable forces for a given material and geometry are immediately observed. Due to the complexity of the problem, a strategy based on cluster computing, database compression, and real-time post-processing on the device has been implemented.

NGS QC Toolkit: a toolkit for quality control of next generation sequencing data.

Directory of Open Access Journals (Sweden)

Ravi K Patel

Full Text Available Next generation sequencing (NGS technologies provide a high-throughput means to generate large amount of sequence data. However, quality control (QC of sequence data generated from these technologies is extremely important for meaningful downstream analysis. Further, highly efficient and fast processing tools are required to handle the large volume of datasets. Here, we have developed an application, NGS QC Toolkit, for quality check and filtering of high-quality data. This toolkit is a standalone and open source application freely available at http://www.nipgr.res.in/ngsqctoolkit.html. All the tools in the application have been implemented in Perl programming language. The toolkit is comprised of user-friendly tools for QC of sequencing data generated using Roche 454 and Illumina platforms, and additional tools to aid QC (sequence format converter and trimming tools and analysis (statistics tools. A variety of options have been provided to facilitate the QC at user-defined parameters. The toolkit is expected to be very useful for the QC of NGS data to facilitate better downstream analysis.

Automated prototyping tool-kit (APT)

OpenAIRE

Nada, Nader; Shing, M.; Berzins, V.; Luqi

2002-01-01

Automated prototyping tool-kit (APT) is an integrated set of software tools that generate source programs directly from real-time requirements. The APT system uses a fifth-generation prototyping language to model the communication structure, timing constraints, 1/0 control, and data buffering that comprise the requirements for an embedded software system. The language supports the specification of hard real-time systems with reusable components from domain specific component libraries. APT ha...

Windows forensic analysis toolkit advanced analysis techniques for Windows 7

CERN Document Server

Carvey, Harlan

2012-01-01

Now in its third edition, Harlan Carvey has updated "Windows Forensic Analysis Toolkit" to cover Windows 7 systems. The primary focus of this edition is on analyzing Windows 7 systems and on processes using free and open-source tools. The book covers live response, file analysis, malware detection, timeline, and much more. The author presents real-life experiences from the trenches, making the material realistic and showing the why behind the how. New to this edition, the companion and toolkit materials are now hosted online. This material consists of electronic printable checklists, cheat sheets, free custom tools, and walk-through demos. This edition complements "Windows Forensic Analysis Toolkit, 2nd Edition", (ISBN: 9781597494229), which focuses primarily on XP. It includes complete coverage and examples on Windows 7 systems. It contains Lessons from the Field, Case Studies, and War Stories. It features companion online material, including electronic printable checklists, cheat sheets, free custom tools, ...

Wetland Resources Action Planning (WRAP) toolkit

DEFF Research Database (Denmark)

Bunting, Stuart W.; Smith, Kevin G.; Lund, Søren

2013-01-01

The Wetland Resources Action Planning (WRAP) toolkit is a toolkit of research methods and better management practices used in HighARCS (Highland Aquatic Resources Conservation and Sustainable Development), an EU-funded project with field experiences in China, Vietnam and India. It aims to communi......The Wetland Resources Action Planning (WRAP) toolkit is a toolkit of research methods and better management practices used in HighARCS (Highland Aquatic Resources Conservation and Sustainable Development), an EU-funded project with field experiences in China, Vietnam and India. It aims...... to communicate best practices in conserving biodiversity and sustaining ecosystem services to potential users and to promote the wise-use of aquatic resources, improve livelihoods and enhance policy information....

Tank waste remediation system configuration management plan

International Nuclear Information System (INIS)

Vann, J.M.

1998-01-01

The configuration management program for the Tank Waste Remediation System (TWRS) Project Mission supports management of the project baseline by providing the mechanisms to identify, document, and control the functional and physical characteristics of the products. This document is one of the tools used to develop and control the mission and work. It is an integrated approach for control of technical, cost, schedule, and administrative information necessary to manage the configurations for the TWRS Project Mission. Configuration management focuses on five principal activities: configuration management system management, configuration identification, configuration status accounting, change control, and configuration management assessments. TWRS Project personnel must execute work in a controlled fashion. Work must be performed by verbatim use of authorized and released technical information and documentation. Application of configuration management will be consistently applied across all TWRS Project activities and assessed accordingly. The Project Hanford Management Contract (PHMC) configuration management requirements are prescribed in HNF-MP-013, Configuration Management Plan (FDH 1997a). This TWRS Configuration Management Plan (CMP) implements those requirements and supersedes the Tank Waste Remediation System Configuration Management Program Plan described in Vann, 1996. HNF-SD-WM-CM-014, Tank Waste Remediation System Configuration Management Implementation Plan (Vann, 1997) will be revised to implement the requirements of this plan. This plan provides the responsibilities, actions and tools necessary to implement the requirements as defined in the above referenced documents

The 2016 ACCP Pharmacotherapy Didactic Curriculum Toolkit.

Science.gov (United States)

Schwinghammer, Terry L; Crannage, Andrew J; Boyce, Eric G; Bradley, Bridget; Christensen, Alyssa; Dunnenberger, Henry M; Fravel, Michelle; Gurgle, Holly; Hammond, Drayton A; Kwon, Jennifer; Slain, Douglas; Wargo, Kurt A

2016-11-01

The 2016 American College of Clinical Pharmacy (ACCP) Educational Affairs Committee was charged with updating and contemporizing ACCP's 2009 Pharmacotherapy Didactic Curriculum Toolkit. The toolkit has been designed to guide schools and colleges of pharmacy in developing, maintaining, and modifying their curricula. The 2016 committee reviewed the recent medical literature and other documents to identify disease states that are responsive to drug therapy. Diseases and content topics were organized by organ system, when feasible, and grouped into tiers as defined by practice competency. Tier 1 topics should be taught in a manner that prepares all students to provide collaborative, patient-centered care upon graduation and licensure. Tier 2 topics are generally taught in the professional curriculum, but students may require additional knowledge or skills after graduation (e.g., residency training) to achieve competency in providing direct patient care. Tier 3 topics may not be taught in the professional curriculum; thus, graduates will be required to obtain the necessary knowledge and skills on their own to provide direct patient care, if required in their practice. The 2016 toolkit contains 276 diseases and content topics, of which 87 (32%) are categorized as tier 1, 133 (48%) as tier 2, and 56 (20%) as tier 3. The large number of tier 1 topics will require schools and colleges to use creative pedagogical strategies to achieve the necessary practice competencies. Almost half of the topics (48%) are tier 2, highlighting the importance of postgraduate residency training or equivalent practice experience to competently care for patients with these disorders. The Pharmacotherapy Didactic Curriculum Toolkit will continue to be updated to provide guidance to faculty at schools and colleges of pharmacy as these academic pharmacy institutions regularly evaluate and modify their curricula to keep abreast of scientific advances and associated practice changes. Access the

Supporting LGBT Communities: Police ToolKit

OpenAIRE

Vasquez del Aguila, Ernesto; Franey, Paul

2013-01-01

This toolkit provides police forces with practical educational tools, which can be used as part of a comprehensive LGBT strategy centred on diversity, equality, and non-discrimination. These materials are based on lessons learned through real life policing experiences with LGBT persons. The Toolkit is divided into seven scenarios where police awareness of LGBT issues has been identified as important. The toolkit employs a practical, scenario-based, problem-solving approach to help police offi...

Ethnography in design: Tool-kit or analytic science?

DEFF Research Database (Denmark)

Bossen, Claus

2002-01-01

The role of ethograpyh in system development is discussed through the selective application of an ethnographic easy-to-use toolkit, Contextual design, by a computer firm in the initial stages of the development of a health care system....

Observation-Driven Configuration of Complex Software Systems

Science.gov (United States)

Sage, Aled

2010-06-01

The ever-increasing complexity of software systems makes them hard to comprehend, predict and tune due to emergent properties and non-deterministic behaviour. Complexity arises from the size of software systems and the wide variety of possible operating environments: the increasing choice of platforms and communication policies leads to ever more complex performance characteristics. In addition, software systems exhibit different behaviour under different workloads. Many software systems are designed to be configurable so that policies can be chosen to meet the needs of various stakeholders. For complex software systems it can be difficult to accurately predict the effects of a change and to know which configuration is most appropriate. This thesis demonstrates that it is useful to run automated experiments that measure a selection of system configurations. Experiments can find configurations that meet the stakeholders' needs, find interesting behavioural characteristics, and help produce predictive models of the system's behaviour. The design and use of ACT (Automated Configuration Tool) for running such experiments is described, in combination a number of search strategies for deciding on the configurations to measure. Design Of Experiments (DOE) is discussed, with emphasis on Taguchi Methods. These statistical methods have been used extensively in manufacturing, but have not previously been used for configuring software systems. The novel contribution here is an industrial case study, applying the combination of ACT and Taguchi Methods to DC-Directory, a product from Data Connection Ltd (DCL). The case study investigated the applicability of Taguchi Methods for configuring complex software systems. Taguchi Methods were found to be useful for modelling and configuring DC- Directory, making them a valuable addition to the techniques available to system administrators and developers.

NNCTRL - a CANCSD toolkit for MATLAB(R)

DEFF Research Database (Denmark)

Nørgård, Peter Magnus; Ravn, Ole; Poulsen, Niels Kjølstad

1996-01-01

A set of tools for computer-aided neuro-control system design (CANCSD) has been developed for the MATLAB environment. The tools can be used for construction and simulation of a variety of neural network based control systems. The design methods featured in the toolkit are: direct inverse control...

Practical computational toolkits for dendrimers and dendrons structure design

Science.gov (United States)

Martinho, Nuno; Silva, Liana C.; Florindo, Helena F.; Brocchini, Steve; Barata, Teresa; Zloh, Mire

2017-09-01

Dendrimers and dendrons offer an excellent platform for developing novel drug delivery systems and medicines. The rational design and further development of these repetitively branched systems are restricted by difficulties in scalable synthesis and structural determination, which can be overcome by judicious use of molecular modelling and molecular simulations. A major difficulty to utilise in silico studies to design dendrimers lies in the laborious generation of their structures. Current modelling tools utilise automated assembly of simpler dendrimers or the inefficient manual assembly of monomer precursors to generate more complicated dendrimer structures. Herein we describe two novel graphical user interface toolkits written in Python that provide an improved degree of automation for rapid assembly of dendrimers and generation of their 2D and 3D structures. Our first toolkit uses the RDkit library, SMILES nomenclature of monomers and SMARTS reaction nomenclature to generate SMILES and mol files of dendrimers without 3D coordinates. These files are used for simple graphical representations and storing their structures in databases. The second toolkit assembles complex topology dendrimers from monomers to construct 3D dendrimer structures to be used as starting points for simulation using existing and widely available software and force fields. Both tools were validated for ease-of-use to prototype dendrimer structure and the second toolkit was especially relevant for dendrimers of high complexity and size.

Toolkit Design for Interactive Structured Graphics

National Research Council Canada - National Science Library

Bederson, Benjamin B; Grosjean, Jesse; Meyer, Jon

2003-01-01

.... We describe Jazz (a polylithic toolkit) and Piccolo (a monolithic toolkit), each of which we built to support interactive 2D structured graphics applications in general, and Zoomable User Interface applications in particular...

Data-efficient performance learning for configurable systems

DEFF Research Database (Denmark)

Guo, Jianmei; Yang, Dingyu; Siegmund, Norbert

2017-01-01

results on 10 real-world configurable systems demonstrate the effectiveness and practicality of DECART. In particular, DECART achieves a prediction accuracy of 90% or higher based on a small sample, whose size is linear in the number of features. In addition, we propose a sample quality metric......Many software systems today are configurable, offering customization of functionality by feature selection. Understanding how performance varies in terms of feature selection is key for selecting appropriate configurations that meet a set of given requirements. Due to a huge configuration space...... and the possibly high cost of performance measurement, it is usually not feasible to explore the entire configuration space of a configurable system exhaustively. It is thus a major challenge to accurately predict performance based on a small sample of measured system variants. To address this challenge, we...

Business/Employers Influenza Toolkit

Centers for Disease Control (CDC) Podcasts

2011-09-06

This podcast promotes the "Make It Your Business To Fight The Flu" toolkit for Businesses and Employers. The toolkit provides information and recommended strategies to help businesses and employers promote the seasonal flu vaccine. Additionally, employers will find flyers, posters, and other materials to post and distribute in the workplace.  Created: 9/6/2011 by Office of Infectious Diseases, Office of the Director (OD).   Date Released: 9/7/2011.

The MUSOS (MUsic SOftware System) Toolkit: A computer-based, open source application for testing memory for melodies.

Science.gov (United States)

Rainsford, M; Palmer, M A; Paine, G

2018-04-01

Despite numerous innovative studies, rates of replication in the field of music psychology are extremely low (Frieler et al., 2013). Two key methodological challenges affecting researchers wishing to administer and reproduce studies in music cognition are the difficulty of measuring musical responses, particularly when conducting free-recall studies, and access to a reliable set of novel stimuli unrestricted by copyright or licensing issues. In this article, we propose a solution for these challenges in computer-based administration. We present a computer-based application for testing memory for melodies. Created using the software Max/MSP (Cycling '74, 2014a), the MUSOS (Music Software System) Toolkit uses a simple modular framework configurable for testing common paradigms such as recall, old-new recognition, and stem completion. The program is accompanied by a stimulus set of 156 novel, copyright-free melodies, in audio and Max/MSP file formats. Two pilot tests were conducted to establish the properties of the accompanying stimulus set that are relevant to music cognition and general memory research. By using this software, a researcher without specialist musical training may administer and accurately measure responses from common paradigms used in the study of memory for music.

Solar Integration National Dataset Toolkit | Grid Modernization | NREL

Science.gov (United States)

Solar Integration National Dataset Toolkit Solar Integration National Dataset Toolkit NREL is working on a Solar Integration National Dataset (SIND) Toolkit to enable researchers to perform U.S . regional solar generation integration studies. It will provide modeled, coherent subhourly solar power data

The Reconstruction Toolkit (RTK), an open-source cone-beam CT reconstruction toolkit based on the Insight Toolkit (ITK)

International Nuclear Information System (INIS)

Rit, S; Vila Oliva, M; Sarrut, D; Brousmiche, S; Labarbe, R; Sharp, G C

2014-01-01

We propose the Reconstruction Toolkit (RTK, http://www.openrtk.org), an open-source toolkit for fast cone-beam CT reconstruction, based on the Insight Toolkit (ITK) and using GPU code extracted from Plastimatch. RTK is developed by an open consortium (see affiliations) under the non-contaminating Apache 2.0 license. The quality of the platform is daily checked with regression tests in partnership with Kitware, the company supporting ITK. Several features are already available: Elekta, Varian and IBA inputs, multi-threaded Feldkamp-David-Kress reconstruction on CPU and GPU, Parker short scan weighting, multi-threaded CPU and GPU forward projectors, etc. Each feature is either accessible through command line tools or C++ classes that can be included in independent software. A MIDAS community has been opened to share CatPhan datasets of several vendors (Elekta, Varian and IBA). RTK will be used in the upcoming cone-beam CT scanner developed by IBA for proton therapy rooms. Many features are under development: new input format support, iterative reconstruction, hybrid Monte Carlo / deterministic CBCT simulation, etc. RTK has been built to freely share tomographic reconstruction developments between researchers and is open for new contributions.

The Revolution Continues: Newly Discovered Systems Expand the CRISPR-Cas Toolkit.

Science.gov (United States)

Murugan, Karthik; Babu, Kesavan; Sundaresan, Ramya; Rajan, Rakhi; Sashital, Dipali G

2017-10-05

CRISPR-Cas systems defend prokaryotes against bacteriophages and mobile genetic elements and serve as the basis for revolutionary tools for genetic engineering. Class 2 CRISPR-Cas systems use single Cas endonucleases paired with guide RNAs to cleave complementary nucleic acid targets, enabling programmable sequence-specific targeting with minimal machinery. Recent discoveries of previously unidentified CRISPR-Cas systems have uncovered a deep reservoir of potential biotechnological tools beyond the well-characterized Type II Cas9 systems. Here we review the current mechanistic understanding of newly discovered single-protein Cas endonucleases. Comparison of these Cas effectors reveals substantial mechanistic diversity, underscoring the phylogenetic divergence of related CRISPR-Cas systems. This diversity has enabled further expansion of CRISPR-Cas biotechnological toolkits, with wide-ranging applications from genome editing to diagnostic tools based on various Cas endonuclease activities. These advances highlight the exciting prospects for future tools based on the continually expanding set of CRISPR-Cas systems. Copyright © 2017 Elsevier Inc. All rights reserved.

Wind Integration National Dataset Toolkit | Grid Modernization | NREL

Science.gov (United States)

Integration National Dataset Toolkit Wind Integration National Dataset Toolkit The Wind Integration National Dataset (WIND) Toolkit is an update and expansion of the Eastern Wind Integration Data Set and Western Wind Integration Data Set. It supports the next generation of wind integration studies. WIND

Designing a ticket to ride with the Cognitive Work Analysis Design Toolkit.

Science.gov (United States)

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G; Jenkins, Daniel P

2015-01-01

Cognitive work analysis has been applied in the design of numerous sociotechnical systems. The process used to translate analysis outputs into design concepts, however, is not always clear. Moreover, structured processes for translating the outputs of ergonomics methods into concrete designs are lacking. This paper introduces the Cognitive Work Analysis Design Toolkit (CWA-DT), a design approach which has been developed specifically to provide a structured means of incorporating cognitive work analysis outputs in design using design principles and values derived from sociotechnical systems theory. This paper outlines the CWA-DT and describes its application in a public transport ticketing design case study. Qualitative and quantitative evaluations of the process provide promising early evidence that the toolkit fulfils the evaluation criteria identified for its success, with opportunities for improvement also highlighted. The Cognitive Work Analysis Design Toolkit has been developed to provide ergonomics practitioners with a structured approach for translating the outputs of cognitive work analysis into design solutions. This paper demonstrates an application of the toolkit and provides evaluation findings.

The Customer Flow Toolkit: A Framework for Designing High Quality Customer Services.

Science.gov (United States)

New York Association of Training and Employment Professionals, Albany.

This document presents a toolkit to assist staff involved in the design and development of New York's one-stop system. Section 1 describes the preplanning issues to be addressed and the intended outcomes that serve as the framework for creation of the customer flow toolkit. Section 2 outlines the following strategies to assist in designing local…

Developing a Frame of Reference for understanding configuration systems

DEFF Research Database (Denmark)

Ladeby, Klaes Rohde; Edwards, Kasper

2008-01-01

This paper uses the theory of technical systems to develop a frame of reference of product configuration systems. Following a definition of the configuration task, product model and product configuration system the theory of technical systems are presented. Configuration systems are then related...

A qualitative study of clinic and community member perspectives on intervention toolkits: "Unless the toolkit is used it won't help solve the problem".

Science.gov (United States)

Davis, Melinda M; Howk, Sonya; Spurlock, Margaret; McGinnis, Paul B; Cohen, Deborah J; Fagnan, Lyle J

2017-07-18

Intervention toolkits are common products of grant-funded research in public health and primary care settings. Toolkits are designed to address the knowledge translation gap by speeding implementation and dissemination of research into practice. However, few studies describe characteristics of effective intervention toolkits and their implementation. Therefore, we conducted this study to explore what clinic and community-based users want in intervention toolkits and to identify the factors that support application in practice. In this qualitative descriptive study we conducted focus groups and interviews with a purposive sample of community health coalition members, public health experts, and primary care professionals between November 2010 and January 2012. The transdisciplinary research team used thematic analysis to identify themes and a cross-case comparative analysis to explore variation by participant role and toolkit experience. Ninety six participants representing primary care (n = 54, 56%) and community settings (n = 42, 44%) participated in 18 sessions (13 focus groups, five key informant interviews). Participants ranged from those naïve through expert in toolkit development; many reported limited application of toolkits in actual practice. Participants wanted toolkits targeted at the right audience and demonstrated to be effective. Well organized toolkits, often with a quick start guide, with tools that were easy to tailor and apply were desired. Irrespective of perceived quality, participants experienced with practice change emphasized that leadership, staff buy-in, and facilitative support was essential for intervention toolkits to be translated into changes in clinic or public -health practice. Given the emphasis on toolkits in supporting implementation and dissemination of research and clinical guidelines, studies are warranted to determine when and how toolkits are used. Funders, policy makers, researchers, and leaders in primary care and

Monitoring the grid with the Globus Toolkit MDS4

International Nuclear Information System (INIS)

Schopf, Jennifer M; Pearlman, Laura; Miller, Neill; Kesselman, Carl; Foster, Ian; D'Arcy, Mike; Chervenak, Ann

2006-01-01

The Globus Toolkit Monitoring and Discovery System (MDS4) defines and implements mechanisms for service and resource discovery and monitoring in distributed environments. MDS4 is distinguished from previous similar systems by its extensive use of interfaces and behaviors defined in the WS-Resource Framework and WS-Notification specifications, and by its deep integration into essentially every component of the Globus Toolkit. We describe the MDS4 architecture and the Web service interfaces and behaviors that allow users to discover resources and services, monitor resource and service states, receive updates on current status, and visualize monitoring results. We present two current deployments to provide insights into the functionality that can be achieved via the use of these mechanisms

Provider perceptions of an integrated primary care quality improvement strategy: The PPAQ toolkit.

Science.gov (United States)

Beehler, Gregory P; Lilienthal, Kaitlin R

2017-02-01

The Primary Care Behavioral Health (PCBH) model of integrated primary care is challenging to implement with high fidelity. The Primary Care Behavioral Health Provider Adherence Questionnaire (PPAQ) was designed to assess provider adherence to essential model components and has recently been adapted into a quality improvement toolkit. The aim of this pilot project was to gather preliminary feedback on providers' perceptions of the acceptability and utility of the PPAQ toolkit for making beneficial practice changes. Twelve mental health providers working in Department of Veterans Affairs integrated primary care clinics participated in semistructured interviews to gather quantitative and qualitative data. Descriptive statistics and qualitative content analysis were used to analyze data. Providers identified several positive features of the PPAQ toolkit organization and structure that resulted in high ratings of acceptability, while also identifying several toolkit components in need of modification to improve usability. Toolkit content was considered highly representative of the (PCBH) model and therefore could be used as a diagnostic self-assessment of model adherence. The toolkit was considered to be high in applicability to providers regardless of their degree of prior professional preparation or current clinical setting. Additionally, providers identified several system-level contextual factors that could impact the usefulness of the toolkit. These findings suggest that frontline mental health providers working in (PCBH) settings may be receptive to using an adherence-focused toolkit for ongoing quality improvement. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Energy retrofit analysis toolkits for commercial buildings: A review

International Nuclear Information System (INIS)

Lee, Sang Hoon; Hong, Tianzhen; Piette, Mary Ann; Taylor-Lange, Sarah C.

2015-01-01

Retrofit analysis toolkits can be used to optimize energy or cost savings from retrofit strategies, accelerating the adoption of ECMs (energy conservation measures) in buildings. This paper provides an up-to-date review of the features and capabilities of 18 energy retrofit toolkits, including ECMs and the calculation engines. The fidelity of the calculation techniques, a driving component of retrofit toolkits, were evaluated. An evaluation of the issues that hinder effective retrofit analysis in terms of accessibility, usability, data requirement, and the application of efficiency measures, provides valuable insights into advancing the field forward. Following this review the general concepts were determined: (1) toolkits developed primarily in the private sector use empirically data-driven methods or benchmarking to provide ease of use, (2) almost all of the toolkits which used EnergyPlus or DOE-2 were freely accessible, but suffered from complexity, longer data input and simulation run time, (3) in general, there appeared to be a fine line between having too much detail resulting in a long analysis time or too little detail which sacrificed modeling fidelity. These insights provide an opportunity to enhance the design and development of existing and new retrofit toolkits in the future. - Highlights: • Retrofit analysis toolkits can accelerate the adoption of energy efficiency measures. • A comprehensive review of 19 retrofit analysis toolkits was conducted. • Retrofit toolkits have diverse features, data requirement and computing methods. • Empirical data-driven, normative and detailed energy modeling methods are used. • Identified immediate areas for improvement for retrofit analysis toolkits

SIGKit: Software for Introductory Geophysics Toolkit

Science.gov (United States)

Kruse, S.; Bank, C. G.; Esmaeili, S.; Jazayeri, S.; Liu, S.; Stoikopoulos, N.

2017-12-01

The Software for Introductory Geophysics Toolkit (SIGKit) affords students the opportunity to create model data and perform simple processing of field data for various geophysical methods. SIGkit provides a graphical user interface built with the MATLAB programming language, but can run even without a MATLAB installation. At this time SIGkit allows students to pick first arrivals and match a two-layer model to seismic refraction data; grid total-field magnetic data, extract a profile, and compare this to a synthetic profile; and perform simple processing steps (subtraction of a mean trace, hyperbola fit) to ground-penetrating radar data. We also have preliminary tools for gravity, resistivity, and EM data representation and analysis. SIGkit is being built by students for students, and the intent of the toolkit is to provide an intuitive interface for simple data analysis and understanding of the methods, and act as an entrance to more sophisticated software. The toolkit has been used in introductory courses as well as field courses. First reactions from students are positive. Think-aloud observations of students using the toolkit have helped identify problems and helped shape it. We are planning to compare the learning outcomes of students who have used the toolkit in a field course to students in a previous course to test its effectiveness.

CMS Configuration Editor: GUI based application for user analysis job definition

CERN Document Server

De Cosa, Annapaola

2010-01-01

We present the user interface and the software architecture of the Configuration Editor that is used by CMS physicists to configure their physics analysis tasks. Analysis workflows typically involve execution of a sequence of algorithms, and these are implemented as software modules that are integrated within the CMS software framework (CMSSW). In particular, a set of common analysis tools is provided in the so-called CMS Physics Analysis Toolkit (PAT) and these need to be steered and configured during the execution of an analysis job. The Python scripting language is used to define the job configuration that drives the analysis workflow. Configuring analysis jobs can be quite a challenging task, particularly for newcomers, and therefore a graphical tool, called the Configuration Editor, has been developed to facilitate the creation and inspection of these configuration files. Typically, a user-defined analysis workflow can be produced starting from a standard configuration file, applying and configuring PAT ...

Software control and system configuration management: A systems-wide approach

Science.gov (United States)

Petersen, K. L.; Flores, C., Jr.

1984-01-01

A comprehensive software control and system configuration management process for flight-crucial digital control systems of advanced aircraft has been developed and refined to insure efficient flight system development and safe flight operations. Because of the highly complex interactions among the hardware, software, and system elements of state-of-the-art digital flight control system designs, a systems-wide approach to configuration control and management has been used. Specific procedures are implemented to govern discrepancy reporting and reconciliation, software and hardware change control, systems verification and validation testing, and formal documentation requirements. An active and knowledgeable configuration control board reviews and approves all flight system configuration modifications and revalidation tests. This flexible process has proved effective during the development and flight testing of several research aircraft and remotely piloted research vehicles with digital flight control systems that ranged from relatively simple to highly complex, integrated mechanizations.

chemf: A purely functional chemistry toolkit.

Science.gov (United States)

Höck, Stefan; Riedl, Rainer

2012-12-20

Although programming in a type-safe and referentially transparent style offers several advantages over working with mutable data structures and side effects, this style of programming has not seen much use in chemistry-related software. Since functional programming languages were designed with referential transparency in mind, these languages offer a lot of support when writing immutable data structures and side-effects free code. We therefore started implementing our own toolkit based on the above programming paradigms in a modern, versatile programming language. We present our initial results with functional programming in chemistry by first describing an immutable data structure for molecular graphs together with a couple of simple algorithms to calculate basic molecular properties before writing a complete SMILES parser in accordance with the OpenSMILES specification. Along the way we show how to deal with input validation, error handling, bulk operations, and parallelization in a purely functional way. At the end we also analyze and improve our algorithms and data structures in terms of performance and compare it to existing toolkits both object-oriented and purely functional. All code was written in Scala, a modern multi-paradigm programming language with a strong support for functional programming and a highly sophisticated type system. We have successfully made the first important steps towards a purely functional chemistry toolkit. The data structures and algorithms presented in this article perform well while at the same time they can be safely used in parallelized applications, such as computer aided drug design experiments, without further adjustments. This stands in contrast to existing object-oriented toolkits where thread safety of data structures and algorithms is a deliberate design decision that can be hard to implement. Finally, the level of type-safety achieved by Scala highly increased the reliability of our code as well as the productivity of

SeqKit: A Cross-Platform and Ultrafast Toolkit for FASTA/Q File Manipulation.

Directory of Open Access Journals (Sweden)

Wei Shen

Full Text Available FASTA and FASTQ are basic and ubiquitous formats for storing nucleotide and protein sequences. Common manipulations of FASTA/Q file include converting, searching, filtering, deduplication, splitting, shuffling, and sampling. Existing tools only implement some of these manipulations, and not particularly efficiently, and some are only available for certain operating systems. Furthermore, the complicated installation process of required packages and running environments can render these programs less user friendly. This paper describes a cross-platform ultrafast comprehensive toolkit for FASTA/Q processing. SeqKit provides executable binary files for all major operating systems, including Windows, Linux, and Mac OSX, and can be directly used without any dependencies or pre-configurations. SeqKit demonstrates competitive performance in execution time and memory usage compared to similar tools. The efficiency and usability of SeqKit enable researchers to rapidly accomplish common FASTA/Q file manipulations. SeqKit is open source and available on Github at https://github.com/shenwei356/seqkit.

A Toolkit of Systems Gaming Techniques

Science.gov (United States)

Finnigan, David; McCaughey, Jamie W.

2017-04-01

Decision-makers facing natural hazard crises need a broad set of cognitive tools to help them grapply with complexity. Systems gaming can act as a kind of 'flight simulator for decision making' enabling us to step through real life complex scenarios of the kind that beset us in natural disaster situations. Australian science-theatre ensemble Boho Interactive is collaborating with the Earth Observatory Singapore to develop an in-person systems game modelling an unfolding natural hazard crisis (volcanic unrest or an approaching typhoon) impacting an Asian city. Through a combination of interactive mechanisms drawn from boardgaming and participatory theatre, players will make decisions and assign resources in response to the unfolding crisis. In this performance, David Finnigan from Boho will illustrate some of the participatory techniques that Boho use to illustrate key concepts from complex systems science. These activities are part of a toolkit which can be adapted to fit a range of different contexts and scenarios. In this session, David will present short activities that demonstrate a range of systems principles including common-pool resource challenges (the Tragedy of the Commons), interconnectivity, unintended consequences, tipping points and phase transitions, and resilience. The interactive mechanisms for these games are all deliberately lo-fi rather than digital, for three reasons. First, the experience of a tactile, hands-on game is more immediate and engaging. It brings the focus of the participants into the room and facilitates engagement with the concepts and with each other, rather than with individual devices. Second, the mechanics of the game are laid bare. This is a valuable way to illustrate that complex systems are all around us, and are not merely the domain of hi-tech systems. Finally, these games can be used in a wide variety of contexts by removing computer hardware requirements and instead using materials and resources that are easily found in

Network Science Research Laboratory (NSRL) Discrete Event Toolkit

Science.gov (United States)

2016-01-01

ARL-TR-7579 ● JAN 2016 US Army Research Laboratory Network Science Research Laboratory (NSRL) Discrete Event Toolkit by...Laboratory (NSRL) Discrete Event Toolkit by Theron Trout and Andrew J Toth Computational and Information Sciences Directorate, ARL...Research Laboratory (NSRL) Discrete Event Toolkit 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Theron Trout

Measuring employee satisfaction in new offices - the WODI toolkit

NARCIS (Netherlands)

Maarleveld, M.; Volker, L.; van der Voordt, Theo

2009-01-01

Purpose: This paper presents a toolkit to measure employee satisfaction and perceived labour productivity as affected by different workplace strategies. The toolkit is being illustrated by a case study of the Dutch Revenue Service.
Methodology: The toolkit has been developed by a review of

An approach for the development of visual configuration systems

DEFF Research Database (Denmark)

Hvam, Lars; Ladeby, Klaes Rohde

2007-01-01

How can a visual configuration system be developed to support the specification process' in companies that manufacture customer tailored products? This article focuses on how visual configuration systems can be developed. The approach for developing visual configuration systems has been developed...... by Centre for Product Modelling (CPM) at The Technical University of Denmark. The approach is based on experiences from a visualization project in co-operation between CPM and the global provider of power protection American Power Conversion (APC). The visual configuration system was developed in 2001...... of the product in the visual configuration system....

Using the Model Coupling Toolkit to couple earth system models

Science.gov (United States)

Warner, J.C.; Perlin, N.; Skyllingstad, E.D.

2008-01-01

Continued advances in computational resources are providing the opportunity to operate more sophisticated numerical models. Additionally, there is an increasing demand for multidisciplinary studies that include interactions between different physical processes. Therefore there is a strong desire to develop coupled modeling systems that utilize existing models and allow efficient data exchange and model control. The basic system would entail model "1" running on "M" processors and model "2" running on "N" processors, with efficient exchange of model fields at predetermined synchronization intervals. Here we demonstrate two coupled systems: the coupling of the ocean circulation model Regional Ocean Modeling System (ROMS) to the surface wave model Simulating WAves Nearshore (SWAN), and the coupling of ROMS to the atmospheric model Coupled Ocean Atmosphere Prediction System (COAMPS). Both coupled systems use the Model Coupling Toolkit (MCT) as a mechanism for operation control and inter-model distributed memory transfer of model variables. In this paper we describe requirements and other options for model coupling, explain the MCT library, ROMS, SWAN and COAMPS models, methods for grid decomposition and sparse matrix interpolation, and provide an example from each coupled system. Methods presented in this paper are clearly applicable for coupling of other types of models. ?? 2008 Elsevier Ltd. All rights reserved.

Sierra toolkit computational mesh conceptual model

International Nuclear Information System (INIS)

Baur, David G.; Edwards, Harold Carter; Cochran, William K.; Williams, Alan B.; Sjaardema, Gregory D.

2010-01-01

The Sierra Toolkit computational mesh is a software library intended to support massively parallel multi-physics computations on dynamically changing unstructured meshes. This domain of intended use is inherently complex due to distributed memory parallelism, parallel scalability, heterogeneity of physics, heterogeneous discretization of an unstructured mesh, and runtime adaptation of the mesh. Management of this inherent complexity begins with a conceptual analysis and modeling of this domain of intended use; i.e., development of a domain model. The Sierra Toolkit computational mesh software library is designed and implemented based upon this domain model. Software developers using, maintaining, or extending the Sierra Toolkit computational mesh library must be familiar with the concepts/domain model presented in this report.

Position paper - primary ventilation system configuration

International Nuclear Information System (INIS)

Dalpiaz, E.L.

1994-06-01

The purpose of this paper is to develop and document a position on the configuration of the primary ventilation system. This configuration will be used on the waste storage tanks currently being designed for the Multi-Function Waste Tank Facility. The primary ventilation system provides a single treatment train and exhaust fan for each waste storage tank. The ventilation systems from each of two tanks are grouped with an additional treatment train and exhaust fan that function as backup to either of the two systems

System configuration on Web with mashup.

OpenAIRE

清水, 宏泰; SHIMIZU, Hiroyasu

2014-01-01

Mashup become trend for create Web service due to popularizing cloud service. Mashup is method for create Web service from several Web services and API. Mashup has a few problems. One of the problem is deference of data format and label. Semantic Web can solve it. This paper propose method of building a system on Web with mashup using semantic Web. Mashup system configuration can express as URL. So, editing URL for mashup is editing system configuration. And any device can use this system on ...

Using features of local densities, statistics and HMM toolkit (HTK for offline Arabic handwriting text recognition

Directory of Open Access Journals (Sweden)

El Moubtahij Hicham

2017-12-01

Full Text Available This paper presents an analytical approach of an offline handwritten Arabic text recognition system. It is based on the Hidden Markov Models (HMM Toolkit (HTK without explicit segmentation. The first phase is preprocessing, where the data is introduced in the system after quality enhancements. Then, a set of characteristics (features of local densities and features statistics are extracted by using the technique of sliding windows. Subsequently, the resulting feature vectors are injected to the Hidden Markov Model Toolkit (HTK. The simple database “Arabic-Numbers” and IFN/ENIT are used to evaluate the performance of this system. Keywords: Hidden Markov Models (HMM Toolkit (HTK, Sliding windows

Transportation librarian's toolkit

Science.gov (United States)

2007-12-01

The Transportation Librarians Toolkit is a product of the Transportation Library Connectivity pooled fund study, TPF- 5(105), a collaborative, grass-roots effort by transportation libraries to enhance information accessibility and professional expert...

Siroco, a configurable robot control system

International Nuclear Information System (INIS)

Tejedor, B.G.; Maraggi, G.J.B.

1988-01-01

The SIROCO (Configurable Robot Control System) is an electronic system designed to work in applications where mechanized remote control equipment and robots are necessary especially in Nuclear Power Plants. The structure of the system (hardware and software) determines the following user characteristics: a) Reduction in the time spent in NDT and in radiation doses absorbed, due to remote control operation; b) possibility for full automation in NDT, c) the system can simultaneously control up to six axes and can generate movements in remote areas; and d) possibility for equipment unification, due to SIROCO being a configurable system. (author)

47 CFR 22.923 - Cellular system configuration.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Cellular system configuration. 22.923 Section... MOBILE SERVICES Cellular Radiotelephone Service § 22.923 Cellular system configuration. Mobile stations... directly or through cellular repeaters. Auxiliary test stations may communicate with base or mobile...

The Visualization Toolkit (VTK): Rewriting the rendering code for modern graphics cards

Science.gov (United States)

Hanwell, Marcus D.; Martin, Kenneth M.; Chaudhary, Aashish; Avila, Lisa S.

2015-09-01

The Visualization Toolkit (VTK) is an open source, permissively licensed, cross-platform toolkit for scientific data processing, visualization, and data analysis. It is over two decades old, originally developed for a very different graphics card architecture. Modern graphics cards feature fully programmable, highly parallelized architectures with large core counts. VTK's rendering code was rewritten to take advantage of modern graphics cards, maintaining most of the toolkit's programming interfaces. This offers the opportunity to compare the performance of old and new rendering code on the same systems/cards. Significant improvements in rendering speeds and memory footprints mean that scientific data can be visualized in greater detail than ever before. The widespread use of VTK means that these improvements will reap significant benefits.

A Modular Toolkit for Distributed Interactions

Directory of Open Access Journals (Sweden)

Julien Lange

2011-10-01

Full Text Available We discuss the design, architecture, and implementation of a toolkit which supports some theories for distributed interactions. The main design principles of our architecture are flexibility and modularity. Our main goal is to provide an easily extensible workbench to encompass current algorithms and incorporate future developments of the theories. With the help of some examples, we illustrate the main features of our toolkit.

SatelliteDL: a Toolkit for Analysis of Heterogeneous Satellite Datasets

Science.gov (United States)

Galloy, M. D.; Fillmore, D.

2014-12-01

SatelliteDL is an IDL toolkit for the analysis of satellite Earth observations from a diverse set of platforms and sensors. The core function of the toolkit is the spatial and temporal alignment of satellite swath and geostationary data. The design features an abstraction layer that allows for easy inclusion of new datasets in a modular way. Our overarching objective is to create utilities that automate the mundane aspects of satellite data analysis, are extensible and maintainable, and do not place limitations on the analysis itself. IDL has a powerful suite of statistical and visualization tools that can be used in conjunction with SatelliteDL. Toward this end we have constructed SatelliteDL to include (1) HTML and LaTeX API document generation,(2) a unit test framework,(3) automatic message and error logs,(4) HTML and LaTeX plot and table generation, and(5) several real world examples with bundled datasets available for download. For ease of use, datasets, variables and optional workflows may be specified in a flexible format configuration file. Configuration statements may specify, for example, a region and date range, and the creation of images, plots and statistical summary tables for a long list of variables. SatelliteDL enforces data provenance; all data should be traceable and reproducible. The output NetCDF file metadata holds a complete history of the original datasets and their transformations, and a method exists to reconstruct a configuration file from this information. Release 0.1.0 distributes with ingest methods for GOES, MODIS, VIIRS and CERES radiance data (L1) as well as select 2D atmosphere products (L2) such as aerosol and cloud (MODIS and VIIRS) and radiant flux (CERES). Future releases will provide ingest methods for ocean and land surface products, gridded and time averaged datasets (L3 Daily, Monthly and Yearly), and support for 3D products such as temperature and water vapor profiles. Emphasis will be on NPP Sensor, Environmental and

Microsoft BizTalk ESB Toolkit 2.1

CERN Document Server

Benito, Andrés Del Río

2013-01-01

A practical guide into the architecture and features that make up the services and components of the ESB Toolkit.This book is for experienced BizTalk developers, administrators, and architects, as well as IT managers and BizTalk business analysts. Knowledge and experience with the Toolkit is not a requirement.

Transition Toolkit 3.0: Meeting the Educational Needs of Youth Exposed to the Juvenile Justice System. Third Edition

Science.gov (United States)

Clark, Heather Griller; Mathur, Sarup; Brock, Leslie; O'Cummings, Mindee; Milligan, DeAngela

2016-01-01

The third edition of the National Technical Assistance Center for the Education of Neglected or Delinquent Children and Youth's (NDTAC's) "Transition Toolkit" provides updated information on existing policies, practices, strategies, and resources for transition that build on field experience and research. The "Toolkit" offers…

An Industrial Physics Toolkit

Science.gov (United States)

Cummings, Bill

2004-03-01

Physicists possess many skills highly valued in industrial companies. However, with the exception of a decreasing number of positions in long range research at large companies, job openings in industry rarely say "Physicist Required." One key to a successful industrial career is to know what subset of your physics skills is most highly valued by a given industry and to continue to build these skills while working. This combination of skills from both academic and industrial experience becomes your "Industrial Physics Toolkit" and is a transferable resource when you change positions or companies. This presentation will describe how one builds and sells your own "Industrial Physics Toolkit" using concrete examples from the speaker's industrial experience.

Mastering System Center 2012 Configuration Manager

CERN Document Server

Rachui, Steve; Martinez, Santos; Daalmans, Peter

2012-01-01

Expert coverage of Microsoft's highly anticipated network software deployment tool The latest version of System Center Configuration Manager (SCCM) is a dramatic update of its predecessor Configuration Manager 2007, and this book offers intermediate-to-advanced coverage of how the new SCCM boasts a simplified hierarchy, role-based security, a new console, flexible application deployment, and mobile management. You'll explore planning and installation, migrating from SCCM 2007, deploying software and operating systems, security, monitoring and troubleshooting, and automating and customizing SCC

Designing a Portable and Low Cost Home Energy Management Toolkit

NARCIS (Netherlands)

Keyson, D.V.; Al Mahmud, A.; De Hoogh, M.; Luxen, R.

2013-01-01

In this paper we describe the design of a home energy and comfort management system. The system has three components such as a smart plug with a wireless module, a residential gateway and a mobile app. The combined system is called a home energy management and comfort toolkit. The design is inspired

Hanford Environmental Information System Configuration Management Plan

International Nuclear Information System (INIS)

1996-06-01

The Hanford Environmental Information System (HEIS) Configuration Management Plan establishes the software and data configuration control requirements for the HEIS and project-related databases maintained within the Environmental Restoration Contractor's data management department

Evidence-based Metrics Toolkit for Measuring Safety and Efficiency in Human-Automation Systems

Data.gov (United States)

National Aeronautics and Space Administration — APRIL 2016 NOTE: Principal Investigator moved to Rice University in mid-2015. Project continues at Rice with the same title (Evidence-based Metrics Toolkit for...

An XML-based configuration system for MAST PCS

International Nuclear Information System (INIS)

Storrs, J.; McArdle, G.

2008-01-01

MAST PCS, a port of General Atomics' generic Plasma Control System, is a large software system comprising many source files in C and IDL. Application parameters can affect multiple source files in complex ways, making code development and maintenance difficult. The MAST PCS configuration system aims to make the task of the application developer easier, through the use of XML-based configuration files and a configuration tool which processes them. It is presented here as an example of a useful technique with wide application

Hydropower Regulatory and Permitting Information Desktop (RAPID) Toolkit

Energy Technology Data Exchange (ETDEWEB)

Levine, Aaron L [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-12-19

Hydropower Regulatory and Permitting Information Desktop (RAPID) Toolkit presentation from the WPTO FY14-FY16 Peer Review. The toolkit is aimed at regulatory agencies, consultants, project developers, the public, and any other party interested in learning more about the hydropower regulatory process.

Optimal sensor configuration for complex systems

DEFF Research Database (Denmark)

Sadegh, Payman; Spall, J. C.

1998-01-01

configuration is based on maximizing the overall sensor response while minimizing the correlation among the sensor outputs. The procedure for sensor configuration is based on simultaneous perturbation stochastic approximation (SPSA). SPSA avoids the need for detailed modeling of the sensor response by simply......Considers the problem of sensor configuration for complex systems. Our approach involves definition of an appropriate optimality criterion or performance measure, and description of an efficient and practical algorithm for achieving the optimality objective. The criterion for optimal sensor...... relying on observed responses as obtained by limited experimentation with test sensor configurations. We illustrate the approach with the optimal placement of acoustic sensors for signal detection in structures. This includes both a computer simulation study for an aluminum plate, and real...

Pyradi: an open-source toolkit for infrared calculation and data processing

CSIR Research Space (South Africa)

Willers, CJ

2012-09-01

Full Text Available of such a toolkit facilitates and increases productivity during subsequent tool development: “develop once and use many times”. The concept of an extendible toolkit lends itself naturally to the open-source philosophy, where the toolkit user-base develops...

Using stakeholder perspectives to develop an ePrescribing toolkit for NHS Hospitals: a questionnaire study.

Science.gov (United States)

Lee, Lisa; Cresswell, Kathrin; Slee, Ann; Slight, Sarah P; Coleman, Jamie; Sheikh, Aziz

2014-10-01

To evaluate how an online toolkit may support ePrescribing deployments in National Health Service hospitals, by assessing the type of knowledge-based resources currently sought by key stakeholders. Questionnaire-based survey of attendees at a national ePrescribing symposium. 2013 National ePrescribing Symposium in London, UK. Eighty-four delegates were eligible for inclusion in the survey, of whom 70 completed and returned the questionnaire. Estimate of the usefulness and type of content to be included in an ePrescribing toolkit. Interest in a toolkit designed to support the implementation and use of ePrescribing systems was high (n = 64; 91.4%). As could be expected given the current dearth of such a resource, few respondents (n = 2; 2.9%) had access or used an ePrescribing toolkit at the time of the survey. Anticipated users for the toolkit included implementation (n = 62; 88.6%) and information technology (n = 61; 87.1%) teams, pharmacists (n = 61; 87.1%), doctors (n = 58; 82.9%) and nurses (n = 56; 80.0%). Summary guidance for every stage of the implementation (n = 48; 68.6%), planning and monitoring tools (n = 47; 67.1%) and case studies of hospitals' experiences (n = 45; 64.3%) were considered the most useful types of content. There is a clear need for reliable and up-to-date knowledge to support ePrescribing system deployments and longer term use. The findings highlight how a toolkit may become a useful instrument for the management of knowledge in the field, not least by allowing the exchange of ideas and shared learning.

The self-describing data sets file protocol and Toolkit

International Nuclear Information System (INIS)

Borland, M.; Emery, L.

1995-01-01

The Self-Describing Data Sets (SDDS) file protocol continues to be used extensively in commissioning the Advanced Photon Source (APS) accelerator complex. SDDS protocol has proved useful primarily due to the existence of the SDDS Toolkit, a growing set of about 60 generic commandline programs that read and/or write SDDS files. The SDDS Toolkit is also used extensively for simulation postprocessing, giving physicists a single environment for experiment and simulation. With the Toolkit, new SDDS data is displayed and subjected to complex processing without developing new programs. Data from EPICS, lab instruments, simulation, and other sources are easily integrated. Because the SDDS tools are commandline-based, data processing scripts are readily written using the user's preferred shell language. Since users work within a UNIX shell rather than an application-specific shell or GUI, they may add SDDS-compliant programs and scripts to their personal toolkits without restriction or complication. The SDDS Toolkit has been run under UNIX on SUN OS4, HP-UX, and LINUX. Application of SDDS to accelerator operation is being pursued using Tcl/Tk to provide a GUI

The Data Warehouse Lifecycle Toolkit

CERN Document Server

Kimball, Ralph; Thornthwaite, Warren; Mundy, Joy; Becker, Bob

2011-01-01

A thorough update to the industry standard for designing, developing, and deploying data warehouse and business intelligence systemsThe world of data warehousing has changed remarkably since the first edition of The Data Warehouse Lifecycle Toolkit was published in 1998. In that time, the data warehouse industry has reached full maturity and acceptance, hardware and software have made staggering advances, and the techniques promoted in the premiere edition of this book have been adopted by nearly all data warehouse vendors and practitioners. In addition, the term "business intelligence" emerge

National eHealth strategy toolkit

CERN Document Server

2012-01-01

Worldwide the application of information and communication technologies to support national health-care services is rapidly expanding and increasingly important. This is especially so at a time when all health systems face stringent economic challenges and greater demands to provide more and better care especially to those most in need. The National eHealth Strategy Toolkit is an expert practical guide that provides governments their ministries and stakeholders with a solid foundation and method for the development and implementation of a national eHealth vision action plan and monitoring fram

A survey exploring National Health Service ePrescribing Toolkit use and perceived usefulness amongst English hospitals

Directory of Open Access Journals (Sweden)

Kathrin Cresswell

2017-06-01

Conclusions: Interactive elements and learning lessons from early adopter sites that had accumulated experiences of implementing systems was viewed as the most helpful aspect of the ePrescribing Toolkit. The Toolkit now needs to be further developed to facilitate the continuing implementation/optimisation of ePrescribing and other health information technology across the NHS.

Optimal sensor configuration for complex systems

DEFF Research Database (Denmark)

Sadegh, Payman; Spall, J. C.

1998-01-01

. The procedure for sensor configuration is based on the simultaneous perturbation stochastic approximation (SPSA) algorithm. SPSA avoids the need for detailed modeling of the sensor response by simply relying on the observed responses obtained by limited experimentation with test sensor configurations. We......The paper considers the problem of sensor configuration for complex systems with the aim of maximizing the useful information about certain quantities of interest. Our approach involves: 1) definition of an appropriate optimality criterion or performance measure; and 2) description of an efficient...... and practical algorithm for achieving the optimality objective. The criterion for optimal sensor configuration is based on maximizing the overall sensor response while minimizing the correlation among the sensor outputs, so as to minimize the redundant information being provided by the multiple sensors...

Toolkit for Conceptual Modeling (TCM): User's Guide and Reference

NARCIS (Netherlands)

Dehne, F.; Wieringa, Roelf J.

1997-01-01

The Toolkit for Conceptual Modeling (TCM) is a suite of graphical editors for a number of graphical notation systems that are used in software specification methods. The notations can be used to represent the conceptual structure of the software - hence the name of the suite. This manual describes

Product Configuration Systems - Implications for Product Innovation and Development

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

Farm batch system and Fermi inter-process communication and synchronization toolkit

International Nuclear Information System (INIS)

Mandrichenko, I.V.

2001-01-01

Farms Batch System (FBS) was developed as a batch process management system for off-line Run II data processing at Fermilab. FBS will manage PC farms composed of up to 250 nodes and scalable to 1000 nodes with disk capacity of up to several TB. FBS allows users to start arrays of parallel processes on multiple computers. It uses a simplified resource counting method load balancing. FBS has been successfully used for more than a year at Fermilab by fixed target experiments and will be used for collider experiment off-line data processing. Fermi Inter-Process Communication toolkit (FIPC) was designed as a supplement product for FBS that helps establish synchronization and communication between processes running in a distributed batch environment. However, FIPC is an independent package, and can be used with other batch systems, as well as in a non-batch environment. FIPC provides users with a variety of global distributed objects such as semaphores, queues and string variables. Other types of objects can be easily added to FIPC. FIPC has been running on several PC farms at Fermilab for half a year and is going to be used by CDF for off-line data processing

Margins of safety provided by COSHH Essentials and the ILO Chemical Control Toolkit.

Science.gov (United States)

Jones, Rachael M; Nicas, Mark

2006-03-01

COSHH Essentials, developed by the UK Health and Safety Executive, and the Chemical Control Toolkit (Toolkit) proposed by the International Labor Organization, are 'control banding' approaches to workplace risk management intended for use by proprietors of small and medium-sized businesses. Both systems group chemical substances into hazard bands based on toxicological endpoint and potency. COSSH Essentials uses the European Union's Risk-phrases (R-phrases), whereas the Toolkit uses R-phrases and the Globally Harmonized System (GHS) of Classification and Labeling of Chemicals. Each hazard band is associated with a range of airborne concentrations, termed exposure bands, which are to be attained by the implementation of recommended control technologies. Here we analyze the margin of safety afforded by the systems and, for each hazard band, define the minimal margin as the ratio of the minimum airborne concentration that produced the toxicological endpoint of interest in experimental animals to the maximum concentration in workplace air permitted by the exposure band. We found that the minimal margins were always occupational exposure limits, we argue that the minimal margins are better indicators of health protection. Further, given the small margins observed, we feel it is important that revisions of these systems provide the exposure bands to users, so as to permit evaluation of control technology capture efficiency.

Visualization of the CMS python configuration system

International Nuclear Information System (INIS)

Erdmann, M; Fischer, R; Klimkovich, T; Mueller, G; Steggemann, J; Hegner, B; Hinzmann, A

2010-01-01

The job configuration system of the CMS experiment is based on the Python programming language. Software modules and their order of execution are both represented by Python objects. In order to investigate and verify configuration parameters and dependencies naturally appearing in modular software, CMS employs a graphical tool. This tool visualizes the configuration objects, their dependencies, and the information flow. Furthermore it can be used for documentation purposes. The underlying software concepts as well as the visualization are presented.

Visualization of the CMS python configuration system

Energy Technology Data Exchange (ETDEWEB)

Erdmann, M; Fischer, R; Klimkovich, T; Mueller, G; Steggemann, J [RWTH Aachen University, Physikalisches Institut 3A, 52062 Aachen (Germany); Hegner, B [CERN, CH-1211 Geneva 23 (Switzerland); Hinzmann, A, E-mail: andreas.hinzmann@cern.c

2010-04-01

The job configuration system of the CMS experiment is based on the Python programming language. Software modules and their order of execution are both represented by Python objects. In order to investigate and verify configuration parameters and dependencies naturally appearing in modular software, CMS employs a graphical tool. This tool visualizes the configuration objects, their dependencies, and the information flow. Furthermore it can be used for documentation purposes. The underlying software concepts as well as the visualization are presented.

Pybel: a Python wrapper for the OpenBabel cheminformatics toolkit

Directory of Open Access Journals (Sweden)

Morley Chris

2008-03-01

Full Text Available Abstract Background Scripting languages such as Python are ideally suited to common programming tasks in cheminformatics such as data analysis and parsing information from files. However, for reasons of efficiency, cheminformatics toolkits such as the OpenBabel toolkit are often implemented in compiled languages such as C++. We describe Pybel, a Python module that provides access to the OpenBabel toolkit. Results Pybel wraps the direct toolkit bindings to simplify common tasks such as reading and writing molecular files and calculating fingerprints. Extensive use is made of Python iterators to simplify loops such as that over all the molecules in a file. A Pybel Molecule can be easily interconverted to an OpenBabel OBMol to access those methods or attributes not wrapped by Pybel. Conclusion Pybel allows cheminformaticians to rapidly develop Python scripts that manipulate chemical information. It is open source, available cross-platform, and offers the power of the OpenBabel toolkit to Python programmers.

An open source toolkit for medical imaging de-identification

International Nuclear Information System (INIS)

Rodriguez Gonzalez, David; Carpenter, Trevor; Wardlaw, Joanna; Hemert, Jano I. van

2010-01-01

Medical imaging acquired for clinical purposes can have several legitimate secondary uses in research projects and teaching libraries. No commonly accepted solution for anonymising these images exists because the amount of personal data that should be preserved varies case by case. Our objective is to provide a flexible mechanism for anonymising Digital Imaging and Communications in Medicine (DICOM) data that meets the requirements for deployment in multicentre trials. We reviewed our current de-identification practices and defined the relevant use cases to extract the requirements for the de-identification process. We then used these requirements in the design and implementation of the toolkit. Finally, we tested the toolkit taking as a reference those requirements, including a multicentre deployment. The toolkit successfully anonymised DICOM data from various sources. Furthermore, it was shown that it could forward anonymous data to remote destinations, remove burned-in annotations, and add tracking information to the header. The toolkit also implements the DICOM standard confidentiality mechanism. A DICOM de-identification toolkit that facilitates the enforcement of privacy policies was developed. It is highly extensible, provides the necessary flexibility to account for different de-identification requirements and has a low adoption barrier for new users. (orig.)

XPIWIT--an XML pipeline wrapper for the Insight Toolkit.

Science.gov (United States)

Bartschat, Andreas; Hübner, Eduard; Reischl, Markus; Mikut, Ralf; Stegmaier, Johannes

2016-01-15

The Insight Toolkit offers plenty of features for multidimensional image analysis. Current implementations, however, often suffer either from a lack of flexibility due to hard-coded C++ pipelines for a certain task or by slow execution times, e.g. caused by inefficient implementations or multiple read/write operations for separate filter execution. We present an XML-based wrapper application for the Insight Toolkit that combines the performance of a pure C++ implementation with an easy-to-use graphical setup of dynamic image analysis pipelines. Created XML pipelines can be interpreted and executed by XPIWIT in console mode either locally or on large clusters. We successfully applied the software tool for the automated analysis of terabyte-scale, time-resolved 3D image data of zebrafish embryos. XPIWIT is implemented in C++ using the Insight Toolkit and the Qt SDK. It has been successfully compiled and tested under Windows and Unix-based systems. Software and documentation are distributed under Apache 2.0 license and are publicly available for download at https://bitbucket.org/jstegmaier/xpiwit/downloads/. johannes.stegmaier@kit.edu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Veterinary Immunology Committee Toolkit Workshop 2010: Progress and plans

Science.gov (United States)

The Third Veterinary Immunology Committee (VIC) Toolkit Workshop took place at the Ninth International Veterinary Immunology Symposium (IVIS) in Tokyo, Japan on August 18, 2020. The Workshop built on previous Toolkit Workshops and covered various aspects of reagent development, commercialisation an...

System Configuration Management Implementation Procedure for the Cold Vacuum Drying Facility Monitoring and Control System

International Nuclear Information System (INIS)

ANGLESEY, M.O.

2000-01-01

The purpose of this document is to establish the System Configuration Management Implementation Procedure (SCMIP) for the Cold Vacuum Drying Facility (CVDF) Monitoring and Control System (MCS). This procedure provides configuration management for the process control system. The process control system consists of equipment hardware and software that controls and monitors the instrumentation and equipment associated with the CVDF processes. Refer to SNF-3090, Cold Vacuum Drying Facility Monitoring and Control System Design Description, HNF-3553, Annex B, Safety Analysis Report for the Cold Vacuum Drying Facility, and AP-CM-6-037-00, SNF Project Process Automation Software and Equipment Configuration. This SCMIP identifies and defines the system configuration items in the control system, provides configuration control throughout the system life cycle, provides configuration status accounting, physical protection and control, and verifies the completeness and correctness of these items

Product Configuration Systems and Productivity

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

Configurating computer-controlled bar system

OpenAIRE

Šuštaršič, Nejc

2010-01-01

The principal goal of my diploma thesis is creating an application for configurating computer-controlled beverages dispensing systems. In the preamble of my thesis I present the theoretical platform for point of sale systems and beverages dispensing systems, which are required for the understanding of the target problematics. As with many other fields, computer tehnologies entered the field of managing bars and restaurants quite some time ago. Basic components of every bar or restaurant a...

Tank waste remediation system configuration management implementation plan

International Nuclear Information System (INIS)

Vann, J.M.

1998-01-01

The Tank Waste Remediation System (TWRS) Configuration Management Implementation Plan describes the actions that will be taken by Project Hanford Management Contract Team to implement the TWRS Configuration Management program defined in HNF 1900, TWRS Configuration Management Plan. Over the next 25 years, the TWRS Project will transition from a safe storage mission to an aggressive retrieval, storage, and disposal mission in which substantial Engineering, Construction, and Operations activities must be performed. This mission, as defined, will require a consolidated configuration management approach to engineering, design, construction, as-building, and operating in accordance with the technical baselines that emerge from the life cycles. This Configuration Management Implementation Plan addresses the actions that will be taken to strengthen the TWRS Configuration Management program

Risk-based configuration control system: Analysis and approaches

International Nuclear Information System (INIS)

Samanta, P.K.; Kim, I.S.; Lofgren, E.V.; Vesely, W.E.

1990-01-01

This paper presents an analysis of risks associated with component outage configurations during power operation of a nuclear power plant and discusses approaches and strategies for developing a risk-based configuration control system. A configuration, as used here, is a set of component states. The objective of risk-based configuration control is to detect and control plant configurations using a risk-perspective. The configuration contributions to core-melt frequency and core-melt probability are studied for two plants. Large core-melt frequency can be caused by configurations and there are a number of such configurations that are not currently controlled by technical specifications. However, the expected frequency of occurrence of the impacting configurations is small and the actual core-melt probability contributions are also generally small. Effective strategies and criteria for controlling configuration risks are presented. Such control strategies take into consideration the risks associated with configurations, the nature and characteristics of the configuration risks, and also the practical considerations such as adequate repair times and/or options to transfer to low risk configurations. Alternative types of criteria are discussed that are not overly restrictive to result in unnecessary plant shutdown, but rather motivates effective test and maintenance practices that control risk-significant configurations to allow continued operation with an adequate margin to meet challenges to safety

Risk-based configuration control system: Analysis and approaches

International Nuclear Information System (INIS)

Samanta, P.K.; Vesely, W.E.; Kim, I.S.; Lofgren, E.V.

1989-01-01

This paper presents an analysis of risks associated with component outage configurations during power operation of a nuclear power plant and discusses approaches and strategies for developing a risk-based configuration control system. A configuration, as used here, is a set of component states. The objective of risk-based configuration control is to detect and control plant configurations using a risk-perspective. The configuration contributions to core-melt frequency and core-melt probability are studied for two plants. Large core-melt frequency can be caused by configurations and there are a number of such configurations that are not currently controlled by technical specifications. However, the expected frequency of occurrence of the impacting configurations is small and the actual core-melt probability contributions are also generally small. Effective strategies and criteria for controlling configuration risks are presented. Such control strategies take into consideration the risks associated with configurations, the nature and characteristics of the configuration risks, and also the practical considerations such as adequate repair times and/or options to transfer to low risk configurations. Alternative types of criteria are discussed that are not overly restrictive to result in unnecessary plant shutdown, but rather motivates effective tests and maintenance practices that control; risk-significant configurations to allow continued operation with an adequate margin to meet challenges to safety. 3 refs., 7 figs., 2 tabs

Automated software configuration in the MONSOON system

Science.gov (United States)

Daly, Philip N.; Buchholz, Nick C.; Moore, Peter C.

2004-09-01

MONSOON is the next generation OUV-IR controller project being developed at NOAO. The design is flexible, emphasizing code re-use, maintainability and scalability as key factors. The software needs to support widely divergent detector systems ranging from multi-chip mosaics (for LSST, QUOTA, ODI and NEWFIRM) down to large single or multi-detector laboratory development systems. In order for this flexibility to be effective and safe, the software must be able to configure itself to the requirements of the attached detector system at startup. The basic building block of all MONSOON systems is the PAN-DHE pair which make up a single data acquisition node. In this paper we discuss the software solutions used in the automatic PAN configuration system.

A Toolkit to Study Sensitivity of the Geant4 Predictions to the Variations of the Physics Model Parameters

Energy Technology Data Exchange (ETDEWEB)

Fields, Laura [Fermilab; Genser, Krzysztof [Fermilab; Hatcher, Robert [Fermilab; Kelsey, Michael [SLAC; Perdue, Gabriel [Fermilab; Wenzel, Hans [Fermilab; Wright, Dennis H. [SLAC; Yarba, Julia [Fermilab

2017-08-21

Geant4 is the leading detector simulation toolkit used in high energy physics to design detectors and to optimize calibration and reconstruction software. It employs a set of carefully validated physics models to simulate interactions of particles with matter across a wide range of interaction energies. These models, especially the hadronic ones, rely largely on directly measured cross-sections and phenomenological predictions with physically motivated parameters estimated by theoretical calculation or measurement. Because these models are tuned to cover a very wide range of possible simulation tasks, they may not always be optimized for a given process or a given material. This raises several critical questions, e.g. how sensitive Geant4 predictions are to the variations of the model parameters, or what uncertainties are associated with a particular tune of a Geant4 physics model, or a group of models, or how to consistently derive guidance for Geant4 model development and improvement from a wide range of available experimental data. We have designed and implemented a comprehensive, modular, user-friendly software toolkit to study and address such questions. It allows one to easily modify parameters of one or several Geant4 physics models involved in the simulation, and to perform collective analysis of multiple variants of the resulting physics observables of interest and comparison against a variety of corresponding experimental data. Based on modern event-processing infrastructure software, the toolkit offers a variety of attractive features, e.g. flexible run-time configurable workflow, comprehensive bookkeeping, easy to expand collection of analytical components. Design, implementation technology, and key functionalities of the toolkit are presented and illustrated with results obtained with Geant4 key hadronic models.

System Configuration Management Implementation Procedure for the Canister Storage Building (CSB)

International Nuclear Information System (INIS)

GARRISON, R.C.

2000-01-01

This document implements the procedure for providing configuration control for the monitoring and control systems associated with the operation of the Canister Storage Building (CSB). It identifies and defines the configuration items in the monitoring and control systems, provides configuration control of these items throughout the system life cycle, provides configuration status accounting, physical protection and control, and verifies the completeness and correctness of the items. It is written to comply with HNF-SD-SNF-CM-001, Spent Nuclear Fuel Configuration Management Plan (Forehand 1998), HNF-PRO-309, Computer Software Quality Assurance Requirements, HNF-PRO-2778, IRM Application Software System Life Cycle Standards, and applicable sections of administrative procedure AP-CM-6-037-00, SNF Project Process Automation Software and Equipment Configuration Management

DRAM selection and configuration for real-time mobile systems

NARCIS (Netherlands)

Gomony, M.D.; Weis, C.; Akesson, K.B.; Wehn, N.; Goossens, K.G.W.

2012-01-01

The performance and power consumption of mobile DRAMs (LPDDRs) depend on the configuration of system-level parameters, such as operating frequency, interface width, request size, and memory map. In mobile systems running both realtime and non-real-time applications, the memory configuration must

Software control and system configuration management - A process that works

Science.gov (United States)

Petersen, K. L.; Flores, C., Jr.

1983-01-01

A comprehensive software control and system configuration management process for flight-crucial digital control systems of advanced aircraft has been developed and refined to insure efficient flight system development and safe flight operations. Because of the highly complex interactions among the hardware, software, and system elements of state-of-the-art digital flight control system designs, a systems-wide approach to configuration control and management has been used. Specific procedures are implemented to govern discrepancy reporting and reconciliation, software and hardware change control, systems verification and validation testing, and formal documentation requirements. An active and knowledgeable configuration control board reviews and approves all flight system configuration modifications and revalidation tests. This flexible process has proved effective during the development and flight testing of several research aircraft and remotely piloted research vehicles with digital flight control systems that ranged from relatively simple to highly complex, integrated mechanizations.

Communities and Spontaneous Urban Planning: A Toolkit for Urban ...

International Development Research Centre (IDRC) Digital Library (Canada)

State-led urban planning is often absent, which creates unsustainable environments and hinders the integration of migrants. Communities' prospects of ... This toolkit is expected to be a viable alternative for planning urban expansion wherever it cannot be carried out through traditional means. The toolkit will be tested in ...

Configuration determination for k-out-of-n partially redundant systems

International Nuclear Information System (INIS)

Lu Lixuan; Lewis, Gregory

2008-01-01

The k-out-of-n configuration is a widely adopted structure for partially redundant safety systems. This configuration ensures a high level of reliability and safety with limited financial and space resources. It also facilitates on-line Test and Maintenance (T and M) without having to shut the system down. One question a decision maker needs to answer when adopting k-out-of-n systems is: what is the best configuration for the application, i.e. how many channels in total need to be utilized and among these channels, how many channels need to function simultaneously in order for the system to function. There are various factors to consider in order to make this decision. This paper looks at this problem from a reliability engineers point of view. A quantitative analysis is performed for both unavailability and probability of spurious operation due to independent failure. In particular, the relative gain and/or loss of these quantities that occurs due to changing from one configuration to another are compared through rigorous mathematical analysis. The results provide important information that can be used when choosing system configurations to meet regulatory requirements and financial constraints. The two different configurations for shutdown systems in Nuclear Power Plants, the 2-out-of-3 system and the 2-out-of-4 system, are utilized as an example to illustrate the theoretical results

Risk-based configuration control system: Analysis and approaches

International Nuclear Information System (INIS)

Samanta, P.K.; Kim, I.S.; Vesely, W.E.; Lofgren, E.V.

1989-01-01

This paper presents an evaluation of the configuration risks associated with the operation of a nuclear power plant and the approaches to control these risks using risk-based configuration control considerations. In that context, the actual and maximum potential configuration risks at a plant are analyzed and the alternative types criteria for a risk-based configuration control systems are described. The risk-based configuration calculations which are studied here focus on the core-melt frequency impacts from given plant configurations. By calculating the core-melt frequency for given configurations, the configurations which cause large core-melt frequency increases can be identified and controlled. The duration time in which the configuration can exist can then be limited or the core-melt frequency level associated with the configuration can be reduced by various actions. Furthermore, maintenances and tests can be scheduled to avoid the configurations which cause large core-melt frequency increases. Present technical specifications do not control many of these configurations which can cause large core-melt frequency increases but instead focus on many risk-unimportant allowed outage times. Hence, risk-based configuration management can be effectively used to reduce core-melt frequency associated risks at a plant and at the same time can provide flexibility in plant operation. The alternative strategies for controlling the core-melt frequency and other risk contributions include: (1) controlling the increased risk level which is associated with the configuration; (2) controlling the individual configuration risk which is associated with a given duration of a configuration; (3) controlling the time period configuration risk from configurations which occur in a time period

Design-based learning in classrooms using playful digital toolkits

NARCIS (Netherlands)

Scheltenaar, K.J.; van der Poel, J.E.C.; Bekker, Tilde

2015-01-01

The goal of this paper is to explore how to implement Design Based Learning (DBL) with digital toolkits to teach 21st century skills in (Dutch) schools. It describes the outcomes of a literature study and two design case studies in which such a DBL approach with digital toolkits was iteratively

The Lean and Environment Toolkit

Science.gov (United States)

This Lean and Environment Toolkit assembles practical experience collected by the U.S. Environmental Protection Agency (EPA) and partner companies and organizations that have experience with coordinating Lean implementation and environmental management.

An expert system for configuring a network for a Milstar terminal

Science.gov (United States)

Mahoney, Melissa J.; Wilson, Elizabeth J.

1994-01-01

This paper describes a rule-based expert system which assists the user in configuring a network for Air Force terminals using the Milstar satellite system. The network configuration expert system approach uses CLIPS. The complexity of network configuration is discussed, and the methods used to model it are described.

Evaluation of a novel compact shearography system with DOE configuration

Science.gov (United States)

da Silva, Fabio Aparecido Alves; Willemann, Daniel Pedro; Fantin, Analucia Vieira; Benedet, Mauro Eduardo; Gonçalves, Armando Albertazzi

2018-05-01

The most common optical configuration used to produce the lateral shifted images, in a Shearography system, is the Modified Michelson interferometer, because of its simple configuration. Tests carried out in recent years have shown that the modified interferometer of Michelson is a device that presents good results in a laboratory environment, but still presents difficulties in the field. These difficulties were the main motivation for the development of a more robust system, able to operate in unstable environments. This paper presents a new shearography configuration based on Diffractive Optical Element (DOE). Different from the diffractive common-path setups found in literature, in the proposed configuration, the DOE is positioned between the image sensor and the objective lens and mounted on a flexible holder, which has an important function to promote the system's robustness. Another advantage of the proposed system is in respect to phase shifting, since it is insensitive to wavelength variations. The lateral movement of the DOE produces a phase shifting in the shearography system. Since the pitch of the diffractive grating used is about 60 times greater than the wavelength of a green laser, the DOE configuration becomes much more robust to external influences compared to the Michelson Interferometer configuration. This work also presents an evaluation of the proposed shearography system designed, and some comparative results regarding a classical shearography system.

The Database Driven ATLAS Trigger Configuration System

CERN Document Server

Martyniuk, Alex; The ATLAS collaboration

2015-01-01

This contribution describes the trigger selection configuration system of the ATLAS low- and high-level trigger (HLT) and the upgrades it received in preparation for LHC Run 2. The ATLAS trigger configuration system is responsible for applying the physics selection parameters for the online data taking at both trigger levels and the proper connection of the trigger lines across those levels. Here the low-level trigger consists of the already existing central trigger (CT) and the new Level-1 Topological trigger (L1Topo), which has been added for Run 2. In detail the tasks of the configuration system during the online data taking are Application of the selection criteria, e.g. energy cuts, minimum multiplicities, trigger object correlation, at the three trigger components L1Topo, CT, and HLT On-the-fly, e.g. rate-dependent, generation and application of prescale factors to the CT and HLT to adjust the trigger rates to the data taking conditions, such as falling luminosity or rate spikes in the detector readout ...

Srijan: a graphical toolkit for sensor network macroprogramming

OpenAIRE

Pathak , Animesh; Gowda , Mahanth K.

2009-01-01

International audience; Macroprogramming is an application development technique for wireless sensor networks (WSNs) where the developer specifies the behavior of the system, as opposed to that of the constituent nodes. In this proposed demonstration, we would like to present Srijan, a toolkit that enables application development for WSNs in a graphical manner using data-driven macroprogramming. It can be used in various stages of application development, viz. i) specification of application ...

Lean and Information Technology Toolkit

Science.gov (United States)

The Lean and Information Technology Toolkit is a how-to guide which provides resources to environmental agencies to help them use Lean Startup, Lean process improvement, and Agile tools to streamline and automate processes.

Applying Product Configuration Systems in Engineering Companies

DEFF Research Database (Denmark)

Ladeby, Klaes Rohde

This Ph.D. thesis looks into the application of configuration systems in engineering companies, and how configuration systems can be used to support business processes in engineering companies. Often the motivation stated by researchers and practitioners is, that a configuration project...... and sustain competitive advantage” (Teece, Pisano, & Shuen, 1997, pp.509) This question has puzzled academics and preoccupied managers for the last century. Yet, it seems there is still no consensus regarding the meaning of strategy, and how strategy works. Type in the word “strategy” on Amazon.co.uk and 76......,133 books apply. Type it in on Google scholar and 8,580,000 homepages apply3. Obviously, strategy is an important subject. However, the subject also seems to be difficult to perceive. Although this thesis is not about strategy, or strategizing, I would like to pursue the definition of strategy one step...

Outage Risk Assessment and Management (ORAM) thermal-hydraulics toolkit

International Nuclear Information System (INIS)

Denny, V.E.; Wassel, A.T.; Issacci, F.; Pal Kalra, S.

2004-01-01

A PC-based thermal-hydraulic toolkit for use in support of outage optimization, management and risk assessment has been developed. This mechanistic toolkit incorporates simple models of key thermal-hydraulic processes which occur during an outage, such as recovery from or mitigation of outage upsets; this includes heat-up of water pools following loss of shutdown cooling, inadvertent drain down of the RCS, boiloff of coolant inventory, heatup of the uncovered core, and reflux cooling. This paper provides a list of key toolkit elements, briefly describes the technical basis and presents illustrative results for RCS transient behavior during reflux cooling, peak clad temperatures for an uncovered core and RCS response to loss of shutdown cooling. (author)

Report of the Los Alamos accelerator automation application toolkit workshop

International Nuclear Information System (INIS)

Clout, P.; Daneels, A.

1990-01-01

A 5 day workshop was held in November 1988 at Los Alamos National Laboratory to address the viability of providing a toolkit optimized for building accelerator control systems. The workshop arose from work started independently at Los Alamos and CERN. This paper presents the discussion and the results of the meeting. (orig.)

Cinfony – combining Open Source cheminformatics toolkits behind a common interface

Directory of Open Access Journals (Sweden)

Hutchison Geoffrey R

2008-12-01

Full Text Available Abstract Background Open Source cheminformatics toolkits such as OpenBabel, the CDK and the RDKit share the same core functionality but support different sets of file formats and forcefields, and calculate different fingerprints and descriptors. Despite their complementary features, using these toolkits in the same program is difficult as they are implemented in different languages (C++ versus Java, have different underlying chemical models and have different application programming interfaces (APIs. Results We describe Cinfony, a Python module that presents a common interface to all three of these toolkits, allowing the user to easily combine methods and results from any of the toolkits. In general, the run time of the Cinfony modules is almost as fast as accessing the underlying toolkits directly from C++ or Java, but Cinfony makes it much easier to carry out common tasks in cheminformatics such as reading file formats and calculating descriptors. Conclusion By providing a simplified interface and improving interoperability, Cinfony makes it easy to combine complementary features of OpenBabel, the CDK and the RDKit.

The DLESE Evaluation Toolkit Project

Science.gov (United States)

Buhr, S. M.; Barker, L. J.; Marlino, M.

2002-12-01

The Evaluation Toolkit and Community project is a new Digital Library for Earth System Education (DLESE) collection designed to raise awareness of project evaluation within the geoscience education community, and to enable principal investigators, teachers, and evaluators to implement project evaluation more readily. This new resource is grounded in the needs of geoscience educators, and will provide a virtual home for a geoscience education evaluation community. The goals of the project are to 1) provide a robust collection of evaluation resources useful for Earth systems educators, 2) establish a forum and community for evaluation dialogue within DLESE, and 3) disseminate the resources through the DLESE infrastructure and through professional society workshops and proceedings. Collaboration and expertise in education, geoscience and evaluation are necessary if we are to conduct the best possible geoscience education. The Toolkit allows users to engage in evaluation at whichever level best suits their needs, get more evaluation professional development if desired, and access the expertise of other segments of the community. To date, a test web site has been built and populated, initial community feedback from the DLESE and broader community is being garnered, and we have begun to heighten awareness of geoscience education evaluation within our community. The web site contains features that allow users to access professional development about evaluation, search and find evaluation resources, submit resources, find or offer evaluation services, sign up for upcoming workshops, take the user survey, and submit calendar items. The evaluation resource matrix currently contains resources that have met our initial review. The resources are currently organized by type; they will become searchable on multiple dimensions of project type, audience, objectives and evaluation resource type as efforts to develop a collection-specific search engine mature. The peer review

Formal Verification Method for Configuration of Integrated Modular Avionics System Using MARTE

Directory of Open Access Journals (Sweden)

Lisong Wang

2018-01-01

Full Text Available The configuration information of Integrated Modular Avionics (IMA system includes almost all details of whole system architecture, which is used to configure the hardware interfaces, operating system, and interactions among applications to make an IMA system work correctly and reliably. It is very important to ensure the correctness and integrity of the configuration in the IMA system design phase. In this paper, we focus on modelling and verification of configuration information of IMA/ARINC653 system based on MARTE (Modelling and Analysis for Real-time and Embedded Systems. Firstly, we define semantic mapping from key concepts of configuration (such as modules, partitions, memory, process, and communications to components of MARTE element and propose a method for model transformation between XML-formatted configuration information and MARTE models. Then we present a formal verification framework for ARINC653 system configuration based on theorem proof techniques, including construction of corresponding REAL theorems according to the semantics of those key components of configuration information and formal verification of theorems for the properties of IMA, such as time constraints, spatial isolation, and health monitoring. After that, a special issue of schedulability analysis of ARINC653 system is studied. We design a hierarchical scheduling strategy with consideration of characters of the ARINC653 system, and a scheduling analyzer MAST-2 is used to implement hierarchical schedule analysis. Lastly, we design a prototype tool, called Configuration Checker for ARINC653 (CC653, and two case studies show that the methods proposed in this paper are feasible and efficient.

Kekule.js: An Open Source JavaScript Chemoinformatics Toolkit.

Science.gov (United States)

Jiang, Chen; Jin, Xi; Dong, Ying; Chen, Ming

2016-06-27

Kekule.js is an open-source, object-oriented JavaScript toolkit for chemoinformatics. It provides methods for many common tasks in molecular informatics, including chemical data input/output (I/O), two- and three-dimensional (2D/3D) rendering of chemical structure, stereo identification, ring perception, structure comparison, and substructure search. Encapsulated widgets to display and edit chemical structures directly in web context are also supplied. Developed with web standards, the toolkit is ideal for building chemoinformatics applications over the Internet. Moreover, it is highly platform-independent and can also be used in desktop or mobile environments. Some initial applications, such as plugins for inputting chemical structures on the web and uses in chemistry education, have been developed based on the toolkit.

Validation of Power Output for the WIND Toolkit

Energy Technology Data Exchange (ETDEWEB)

King, J.; Clifton, A.; Hodge, B. M.

2014-09-01

Renewable energy integration studies require wind data sets of high quality with realistic representations of the variability, ramping characteristics, and forecast performance for current wind power plants. The Wind Integration National Data Set (WIND) Toolkit is meant to be an update for and expansion of the original data sets created for the weather years from 2004 through 2006 during the Western Wind and Solar Integration Study and the Eastern Wind Integration Study. The WIND Toolkit expands these data sets to include the entire continental United States, increasing the total number of sites represented, and it includes the weather years from 2007 through 2012. In addition, the WIND Toolkit has a finer resolution for both the temporal and geographic dimensions. Three separate data sets will be created: a meteorological data set, a wind power data set, and a forecast data set. This report describes the validation of the wind power data set.

The Identification of Potential Resilient Estuary-based Enterprises to Encourage Economic Empowerment in South Africa: a Toolkit Approach

Directory of Open Access Journals (Sweden)

Rebecca Bowd

2012-09-01

Full Text Available It has been argued that ecosystem services can be used as the foundation to provide economic opportunities to empower the disadvantaged. The Ecosystem Services Framework (ESF approach for poverty alleviation, which balances resource conservation and human resource use, has received much attention in the literature. However, few projects have successfully achieved both conservation and economic objectives. This is partly due to there being a hiatus between theory and practice, due to the absence of tools that help make the transition between conceptual frameworks and theory, to practical integration of ecosystem services into decision making. To address this hiatus, an existing conceptual framework for analyzing the robustness of social-ecological systems was translated into a practical toolkit to help understand the complexity of social-ecological systems (SES. The toolkit can be used by a diversity of stakeholders as a decision making aid for assessing ecosystem services supply and demand and associated enterprise opportunities. The toolkit is participatory and combines both a generic "top-down" scientific approach with a case-specific "bottom-up" approach. It promotes a shared understanding of the utilization of ecosystem services, which is the foundation of identifying resilient enterprises. The toolkit comprises four steps: (i ecosystem services supply and demand assessment; (ii roles identification; (iii enterprise opportunity identification; and (vi enterprise risk assessment, and was tested at two estuary study sites. Implementation of the toolkit requires the populating of preprogrammed Excel worksheets through the holding of workshops that are attended by stakeholders associated with the ecosystems. It was concluded that for an enterprise to be resilient, it must be resilient at an external SES level,which the toolkit addresses, and at an internal business functioning level, e.g., social dynamics among personnel, skills, and literacy

Configuration management program plan for Hanford site systems engineering

International Nuclear Information System (INIS)

Hoffman, A.G.

1994-01-01

This plan establishes the integrated configuration management program for the evolving technical baseline developed through the systems engineering process. This configuration management program aligns with the criteria identified in the DOE Standard, DOE-STD-1073-93. Included are specific requirements for control of the systems engineering RDD-100 database, and electronic data incorporated in the database that establishes the Hanford site technical baseline

Configuration and Data Management Process and the System Safety Professional

Science.gov (United States)

Shivers, Charles Herbert; Parker, Nelson C. (Technical Monitor)

2001-01-01

This article presents a discussion of the configuration management (CM) and the Data Management (DM) functions and provides a perspective of the importance of configuration and data management processes to the success of system safety activities. The article addresses the basic requirements of configuration and data management generally based on NASA configuration and data management policies and practices, although the concepts are likely to represent processes of any public or private organization's well-designed configuration and data management program.

A Developing and Maintenance Toolkit for Operating Support System of Nuclear Power Plant with IVI-COM Technology

International Nuclear Information System (INIS)

Zhou, Yang Ping; Dong, Yu Jie; Huang, Xiao Jing; Yoshikawa, Hidekazu

2011-01-01

Because of the development and maturation of computer and related technologies, the digitization is inevitably happening in many fields of complex industrial system such as Nuclear Power Plant (NPP). It is believed that the application of these digital operation support systems is able to improve the safety and reliability of complex industrial system and reduce the worker's work load. However, the design, development and maintenance of operation support system such as digital operating procedure under both operational states and accident conditions require not only a profound understand of design, operation and structure of NPP but also expertise on information technology. Because of the reasons mentioned above, a human interface toolkit is proposed for helping the user to develop the operation support system of complex industrial system. With a friendly graphical interface, this integrated tool includes a database, a procedure editor and a procedure executor. In this database, a three layer hierarchy is adopted to express the complexity of operation procedure, which includes mission, process and node. There are 10 kinds of node: entrance, exit, hint, manual input, detector, actuator, data treatment, branch, judgement and plug-in. With the procedure editor, user can easily develop and maintain the procedure and the finished procedure will be stored in the database. Then, the procedure executor can load the procedure from the database for operation support and thus act as a digital operation support system. The operation support system will sense and actuate the actual industrial systems with the interface based on IVI-COM (Interchangeable Virtual Instrumentation-Component Object Model) technology embedded in detector node and actuator node. With the help of various nodes, processes and missions, the developed digital system can access information from plant, make interaction with operator, call additional application, and so on. According to the design mentioned

A Developing and Maintenance Toolkit for Operating Support System of Nuclear Power Plant with IVI-COM Technology

Energy Technology Data Exchange (ETDEWEB)

Zhou, Yang Ping; Dong, Yu Jie; Huang, Xiao Jing [Tsinghua University, Beijing (China); Yoshikawa, Hidekazu [Harbin Engineering University, Harbin (China)

2011-08-15

Because of the development and maturation of computer and related technologies, the digitization is inevitably happening in many fields of complex industrial system such as Nuclear Power Plant (NPP). It is believed that the application of these digital operation support systems is able to improve the safety and reliability of complex industrial system and reduce the worker's work load. However, the design, development and maintenance of operation support system such as digital operating procedure under both operational states and accident conditions require not only a profound understand of design, operation and structure of NPP but also expertise on information technology. Because of the reasons mentioned above, a human interface toolkit is proposed for helping the user to develop the operation support system of complex industrial system. With a friendly graphical interface, this integrated tool includes a database, a procedure editor and a procedure executor. In this database, a three layer hierarchy is adopted to express the complexity of operation procedure, which includes mission, process and node. There are 10 kinds of node: entrance, exit, hint, manual input, detector, actuator, data treatment, branch, judgement and plug-in. With the procedure editor, user can easily develop and maintain the procedure and the finished procedure will be stored in the database. Then, the procedure executor can load the procedure from the database for operation support and thus act as a digital operation support system. The operation support system will sense and actuate the actual industrial systems with the interface based on IVI-COM (Interchangeable Virtual Instrumentation-Component Object Model) technology embedded in detector node and actuator node. With the help of various nodes, processes and missions, the developed digital system can access information from plant, make interaction with operator, call additional application, and so on. According to the design

ARC Code TI: Crisis Mapping Toolkit

Data.gov (United States)

National Aeronautics and Space Administration — The Crisis Mapping Toolkit (CMT) is a collection of tools for processing geospatial data (images, satellite data, etc.) into cartographic products that improve...

Control Configuration Selection for Multivariable Descriptor Systems

DEFF Research Database (Denmark)

Shaker, Hamid Reza; Stoustrup, Jakob

2012-01-01

Control configuration selection is the procedure of choosing the appropriate input and output pairs for the design of SISO (or block) controllers. This step is an important prerequisite for a successful industrial control strategy. In industrial practices it is often the case that the system, whi...... is that it can be used to propose a richer sparse or block diagonal controller structure. The interaction measure is used for control configuration selection of the linearized CSTR model with descriptor from....

Configurable Web Warehouses construction through BPM Systems

Directory of Open Access Journals (Sweden)

Andrea Delgado

2016-08-01

Full Text Available The process of building Data Warehouses (DW is well known with well defined stages but at the same time, mostly carried out manually by IT people in conjunction with business people. Web Warehouses (WW are DW whose data sources are taken from the web. We define a flexible WW, which can be configured accordingly to different domains, through the selection of the web sources and the definition of data processing characteristics. A Business Process Management (BPM System allows modeling and executing Business Processes (BPs providing support for the automation of processes. To support the process of building flexible WW we propose a two BPs level: a configuration process to support the selection of web sources and the definition of schemas and mappings, and a feeding process which takes the defined configuration and loads the data into the WW. In this paper we present a proof of concept of both processes, with focus on the configuration process and the defined data.

System engineering and configuration management in ITER

International Nuclear Information System (INIS)

Chiocchio, S.; Martin, E.; Barabaschi, P.; Bartels, Hans Werner; How, J.; Spears, W.

2007-01-01

The construction of ITER will represent a major challenge for the fusion community at large, because of the intrinsic complexity of the tokamak design, the large number of different systems which are all essential for its operation, the worldwide distribution of the design activities and the unusual procurement scheme based on a combination of in-kind and directly funded deliverables. A key requirement for the success of such a large project is that a systematic approach to ensure the consistency of the design with the required performance is adopted. Also, effective project management methods, tools and working practices must be deployed to facilitate the communication and collaboration among the institutions and industries involved in the project. The authors have been involved in the definition and practical implementation of the design integration and configuration control structure inside ITER and in the system engineering process during the selection and optimization of the machine configuration. In parallel, they have assessed design, drawing and documentation management software to be used for the construction phase. Here, they describe the experience gained in recent years, explain the drivers behind the selection of the documents and drawings management systems, and illustrate the scope and issues of the configuration management activities to ensure the congruence of the design, to control and track the design changes and to manage the interfaces among the ITER systems

Sealed radioactive sources toolkit

International Nuclear Information System (INIS)

Mac Kenzie, C.

2005-09-01

The IAEA has developed a Sealed Radioactive Sources Toolkit to provide information to key groups about the safety and security of sealed radioactive sources. The key groups addressed are officials in government agencies, medical users, industrial users and the scrap metal industry. The general public may also benefit from an understanding of the fundamentals of radiation safety

Increased accuracy of cost-estimation using product configuration systems

DEFF Research Database (Denmark)

Rasmussen, Jeppe Bredahl; Hvam, Lars; Mortensen, Niels Henrik

This article describes an approach for utilizing Product Configuration Systems (PCS) for quantifying project costs in project-based companies. It presents a case study demonstrating a method of quantifying costs in a way that makes it possible to configure cost- and time estimates. Piecework costs......, material costs and sub-supplier costs are used as principle cost elements and linked to structural and process elements to facilitate configuration. The cost data are used by the PCS to generate fast and accurate cost-estimates, quotations, time estimates and cost summaries. The described cost...... quantification principles have been used in a Scandinavian SME (Small and Medium-sized Enterprise) since the 90’s, but have since 2011 been adopted to be used in a configuration system. A longitudinal case study was conducted to compare cost and time-estimation accuracy before and after implementation. We...

The ECVET toolkit customization for the nuclear energy sector

Energy Technology Data Exchange (ETDEWEB)

Ceclan, Mihail; Ramos, Cesar Chenel; Estorff, Ulrike von [European Commission, Joint Research Centre, Petten (Netherlands). Inst. for Energy and Transport

2015-04-15

As part of its support to the introduction of ECVET in the nuclear energy sector, the Institute for Energy and Transport (IET) of the Joint Research Centre (JRC), European Commission (EC), through the ECVET Team of the European Human Resources Observatory for the Nuclear energy sector (EHRO-N), developed in the last six years (2009-2014) a sectorial approach and a road map for ECVET implementation in the nuclear energy sector. In order to observe the road map for the ECVET implementation, the toolkit customization for nuclear energy sector is required. This article describes the outcomes of the toolkit customization, based on ECVET approach, for nuclear qualifications design. The process of the toolkit customization took into account the fact that nuclear qualifications are mostly of higher levels (five and above) of the European Qualifications Framework.

The ECVET toolkit customization for the nuclear energy sector

International Nuclear Information System (INIS)

Ceclan, Mihail; Ramos, Cesar Chenel; Estorff, Ulrike von

2015-01-01

As part of its support to the introduction of ECVET in the nuclear energy sector, the Institute for Energy and Transport (IET) of the Joint Research Centre (JRC), European Commission (EC), through the ECVET Team of the European Human Resources Observatory for the Nuclear energy sector (EHRO-N), developed in the last six years (2009-2014) a sectorial approach and a road map for ECVET implementation in the nuclear energy sector. In order to observe the road map for the ECVET implementation, the toolkit customization for nuclear energy sector is required. This article describes the outcomes of the toolkit customization, based on ECVET approach, for nuclear qualifications design. The process of the toolkit customization took into account the fact that nuclear qualifications are mostly of higher levels (five and above) of the European Qualifications Framework.

Integrating configuration workflows with project management system

International Nuclear Information System (INIS)

Nilsen, Dimitri; Weber, Pavel

2014-01-01

The complexity of the heterogeneous computing resources, services and recurring infrastructure changes at the GridKa WLCG Tier-1 computing center require a structured approach to configuration management and optimization of interplay between functional components of the whole system. A set of tools deployed at GridKa, including Puppet, Redmine, Foreman, SVN and Icinga, provides the administrative environment giving the possibility to define and develop configuration workflows, reduce the administrative effort and improve sustainable operation of the whole computing center. In this presentation we discuss the developed configuration scenarios implemented at GridKa, which we use for host installation, service deployment, change management procedures, service retirement etc. The integration of Puppet with a project management tool like Redmine provides us with the opportunity to track problem issues, organize tasks and automate these workflows. The interaction between Puppet and Redmine results in automatic updates of the issues related to the executed workflow performed by different system components. The extensive configuration workflows require collaboration and interaction between different departments like network, security, production etc. at GridKa. Redmine plugins developed at GridKa and integrated in its administrative environment provide an effective way of collaboration within the GridKa team. We present the structural overview of the software components, their connections, communication protocols and show a few working examples of the workflows and their automation.

Multimethod evaluation of the VA's peer-to-peer Toolkit for patient-centered medical home implementation.

Science.gov (United States)

Luck, Jeff; Bowman, Candice; York, Laura; Midboe, Amanda; Taylor, Thomas; Gale, Randall; Asch, Steven

2014-07-01

Effective implementation of the patient-centered medical home (PCMH) in primary care practices requires training and other resources, such as online toolkits, to share strategies and materials. The Veterans Health Administration (VA) developed an online Toolkit of user-sourced tools to support teams implementing its Patient Aligned Care Team (PACT) medical home model. To present findings from an evaluation of the PACT Toolkit, including use, variation across facilities, effect of social marketing, and factors influencing use. The Toolkit is an online repository of ready-to-use tools created by VA clinic staff that physicians, nurses, and other team members may share, download, and adopt in order to more effectively implement PCMH principles and improve local performance on VA metrics. Multimethod evaluation using: (1) website usage analytics, (2) an online survey of the PACT community of practice's use of the Toolkit, and (3) key informant interviews. Survey respondents were PACT team members and coaches (n = 544) at 136 VA facilities. Interview respondents were Toolkit users and non-users (n = 32). For survey data, multivariable logistic models were used to predict Toolkit awareness and use. Interviews and open-text survey comments were coded using a "common themes" framework. The Consolidated Framework for Implementation Research (CFIR) guided data collection and analyses. The Toolkit was used by 6,745 staff in the first 19 months of availability. Among members of the target audience, 80 % had heard of the Toolkit, and of those, 70 % had visited the website. Tools had been implemented at 65 % of facilities. Qualitative findings revealed a range of user perspectives from enthusiastic support to lack of sufficient time to browse the Toolkit. An online Toolkit to support PCMH implementation was used at VA facilities nationwide. Other complex health care organizations may benefit from adopting similar online peer-to-peer resource libraries.

Antenna toolkit

CERN Document Server

Carr, Joseph

2006-01-01

Joe Carr has provided radio amateurs and short-wave listeners with the definitive design guide for sending and receiving radio signals with Antenna Toolkit 2nd edition.Together with the powerful suite of CD software, the reader will have a complete solution for constructing or using an antenna - bar the actual hardware! The software provides a simple Windows-based aid to carrying out the design calculations at the heart of successful antenna design. All the user needs to do is select the antenna type and set the frequency - a much more fun and less error prone method than using a con

Terrain-Toolkit

DEFF Research Database (Denmark)

Wang, Qi; Kaul, Manohar; Long, Cheng

2014-01-01

, as will be shown, is used heavily for query processing in spatial databases; and (3) they do not provide the surface distance operator which is fundamental for many applications based on terrain data. Motivated by this, we developed a tool called Terrain-Toolkit for terrain data which accepts a comprehensive set......Terrain data is becoming increasingly popular both in industry and in academia. Many tools have been developed for visualizing terrain data. However, we find that (1) they usually accept very few data formats of terrain data only; (2) they do not support terrain simplification well which...

Performance investigation of solid desiccant evaporative cooling system configurations in different climatic zones

International Nuclear Information System (INIS)

Ali, Muzaffar; Vukovic, Vladimir; Sheikh, Nadeem Ahmed; Ali, Hafiz M.

2015-01-01

Highlights: • Five configurations of a DEC system are analyzed in five climate zones. • DEC system model configurations are developed in Dymola/Modelica. • Performance analysis predicted a suitable DEC system configuration for each climate zone. • Results show that climate of Vienna, Sao Paulo, and Adelaide favors the ventilated-dunkle cycle. • While ventilation cycle configuration suits the climate of Karachi and Shanghai. - Abstract: Performance of desiccant evaporative cooling (DEC) system configurations is strongly influenced by the climate conditions and varies widely in different climate zones. Finding the optimal configuration of DEC systems for a specific climatic zone is tedious and time consuming. This investigation conducts performance analysis of five DEC system configurations under climatic conditions of five cities from different zones: Vienna, Karachi, Sao Paulo, Shanghai, and Adelaide. On the basis of operating cycle, three standard and two modified system configurations (ventilation, recirculation, dunkle cycles; ventilated-recirculation and ventilated-dunkle cycles) are analyzed in these five climate zones. Using an advance equation-based object-oriented (EOO) modeling and simulation approach, optimal configurations of a DEC system are determined for each climate zone. Based on the hourly climate data of each zone for its respective design cooling day, performance of each system configuration is estimated using three performance parameters: cooling capacity, COP, and cooling energy delivered. The results revealed that the continental/micro-thermal climate of Vienna, temperate/mesothermal climate of Sao Paulo, and dry-summer subtropical climate of Adelaide favor the use of ventilated-dunkle cycle configuration with average COP of 0.405, 0.89 and 1.01 respectively. While ventilation cycle based DEC configuration suits arid and semiarid climate of Karachi and another category of temperate/mesothermal climate of Shanghai with average COP of

When paradigms collide at the road rail interface: evaluation of a sociotechnical systems theory design toolkit for cognitive work analysis.

Science.gov (United States)

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G

2016-09-01

The Cognitive Work Analysis Design Toolkit (CWA-DT) is a recently developed approach that provides guidance and tools to assist in applying the outputs of CWA to design processes to incorporate the values and principles of sociotechnical systems theory. In this paper, the CWA-DT is evaluated based on an application to improve safety at rail level crossings. The evaluation considered the extent to which the CWA-DT met pre-defined methodological criteria and aligned with sociotechnical values and principles. Both process and outcome measures were taken based on the ratings of workshop participants and human factors experts. Overall, workshop participants were positive about the process and indicated that it met the methodological criteria and sociotechnical values. However, expert ratings suggested that the CWA-DT achieved only limited success in producing RLX designs that fully aligned with the sociotechnical approach. Discussion about the appropriateness of the sociotechnical approach in a public safety context is provided. Practitioner Summary: Human factors and ergonomics practitioners need evidence of the effectiveness of methods. A design toolkit for cognitive work analysis, incorporating values and principles from sociotechnical systems theory, was applied to create innovative designs for rail level crossings. Evaluation results based on the application are provided and discussed.

Artificial immune system algorithm in VLSI circuit configuration

Science.gov (United States)

Mansor, Mohd. Asyraf; Sathasivam, Saratha; Kasihmuddin, Mohd Shareduwan Mohd

2017-08-01

In artificial intelligence, the artificial immune system is a robust bio-inspired heuristic method, extensively used in solving many constraint optimization problems, anomaly detection, and pattern recognition. This paper discusses the implementation and performance of artificial immune system (AIS) algorithm integrated with Hopfield neural networks for VLSI circuit configuration based on 3-Satisfiability problems. Specifically, we emphasized on the clonal selection technique in our binary artificial immune system algorithm. We restrict our logic construction to 3-Satisfiability (3-SAT) clauses in order to outfit with the transistor configuration in VLSI circuit. The core impetus of this research is to find an ideal hybrid model to assist in the VLSI circuit configuration. In this paper, we compared the artificial immune system (AIS) algorithm (HNN-3SATAIS) with the brute force algorithm incorporated with Hopfield neural network (HNN-3SATBF). Microsoft Visual C++ 2013 was used as a platform for training, simulating and validating the performances of the proposed network. The results depict that the HNN-3SATAIS outperformed HNN-3SATBF in terms of circuit accuracy and CPU time. Thus, HNN-3SATAIS can be used to detect an early error in the VLSI circuit design.

Integrated Management System, Configuration and Document Control for Research Reactors

International Nuclear Information System (INIS)

Steynberg, B.J.; Bruyn, J.F. du

2017-01-01

An integrated management system is a single management framework establishing all the processes necessary for the organisation to address all its goals and objectives. Very often only quality, environment and health & safety goals are included when referred to an integrated management system. However, within the research reactor environment such system should include goals pertinent to economic, environmental, health, operational, quality, safeguards, safety, security, and social considerations. One of the important objectives of an integrated management is to create the environment for a healthy safety culture. Configuration management is a disciplined process that involves both management and technical direction to establish and document the design requirements and the physical configuration of the research reactor and to ensure that they remain consistent with each other and the documentation. Configuration is the combination of the physical, functional, and operational characteristics of the structures, systems, and components (SSCs) or parts of the research reactor, operation, or activity. The basic objectives and general principles of configuration management are the same for all research reactors. The objectives of configuration management are to: a) Establish consistency among design requirements, physical configuration, and documentation (including analyses, drawings, and procedures) for the research reactor; b) Maintain this consistency throughout the life of the research reactor, particularly as changes are being made; and c) Retain confidence in the safety of the research reactor. The key elements needed to manage the configuration of research reactors are design requirements, work control, change control, document control, and configuration management assessments. The objective of document control is to ensure that only the most recently approved versions of documents are used in the process of operating, maintaining, and modifying the research reactor

CMS Configuration Editor: GUI based application for user analysis job

International Nuclear Information System (INIS)

Cosa, A de

2011-01-01

We present the user interface and the software architecture of the Configuration Editor for the CMS experiment. The analysis workflow is organized in a modular way integrated within the CMS framework that organizes in a flexible way user analysis code. The Python scripting language is adopted to define the job configuration that drives the analysis workflow. It could be a challenging task for users, especially for newcomers, to develop analysis jobs managing the configuration of many required modules. For this reason a graphical tool has been conceived in order to edit and inspect configuration files. A set of common analysis tools defined in the CMS Physics Analysis Toolkit (PAT) can be steered and configured using the Config Editor. A user-defined analysis workflow can be produced starting from a standard configuration file, applying and configuring PAT tools according to the specific user requirements. CMS users can adopt this tool, the Config Editor, to create their analysis visualizing in real time which are the effects of their actions. They can visualize the structure of their configuration, look at the modules included in the workflow, inspect the dependences existing among the modules and check the data flow. They can visualize at which values parameters are set and change them according to what is required by their analysis task. The integration of common tools in the GUI needed to adopt an object-oriented structure in the Python definition of the PAT tools and the definition of a layer of abstraction from which all PAT tools inherit.

Tank monitor and control system (TMACS) software configuration management plan

International Nuclear Information System (INIS)

GLASSCOCK, J.A.

1999-01-01

This Software Configuration Management Plan (SCMP) describes the methodology for control of computer software developed and supported by the Systems Development and Integration (SD and I) organization of Lockheed Martin Services, Inc. (LMSI) for the Tank Monitor and Control System (TMACS). This plan controls changes to the software and configuration files used by TMACS. The controlled software includes the Gensym software package, Gensym knowledge base files developed for TMACS, C-language programs used by TMACS, the operating system on the production machine, language compilers, and all Windows NT commands and functions which affect the operating environment. The configuration files controlled include the files downloaded to the Acromag and Westronic field instruments

Livermore Big Artificial Neural Network Toolkit

Energy Technology Data Exchange (ETDEWEB)

2016-07-01

LBANN is a toolkit that is designed to train artificial neural networks efficiently on high performance computing architectures. It is optimized to take advantages of key High Performance Computing features to accelerate neural network training. Specifically it is optimized for low-latency, high bandwidth interconnects, node-local NVRAM, node-local GPU accelerators, and high bandwidth parallel file systems. It is built on top of the open source Elemental distributed-memory dense and spars-direct linear algebra and optimization library that is released under the BSD license. The algorithms contained within LBANN are drawn from the academic literature and implemented to work within a distributed-memory framework.

The development of an artificial organic networks toolkit for LabVIEW.

Science.gov (United States)

Ponce, Hiram; Ponce, Pedro; Molina, Arturo

2015-03-15

Two of the most challenging problems that scientists and researchers face when they want to experiment with new cutting-edge algorithms are the time-consuming for encoding and the difficulties for linking them with other technologies and devices. In that sense, this article introduces the artificial organic networks toolkit for LabVIEW™ (AON-TL) from the implementation point of view. The toolkit is based on the framework provided by the artificial organic networks technique, giving it the potential to add new algorithms in the future based on this technique. Moreover, the toolkit inherits both the rapid prototyping and the easy-to-use characteristics of the LabVIEW™ software (e.g., graphical programming, transparent usage of other softwares and devices, built-in programming event-driven for user interfaces), to make it simple for the end-user. In fact, the article describes the global architecture of the toolkit, with particular emphasis in the software implementation of the so-called artificial hydrocarbon networks algorithm. Lastly, the article includes two case studies for engineering purposes (i.e., sensor characterization) and chemistry applications (i.e., blood-brain barrier partitioning data model) to show the usage of the toolkit and the potential scalability of the artificial organic networks technique. © 2015 Wiley Periodicals, Inc.

PsyToolkit: a software package for programming psychological experiments using Linux.

Science.gov (United States)

Stoet, Gijsbert

2010-11-01

PsyToolkit is a set of software tools for programming psychological experiments on Linux computers. Given that PsyToolkit is freely available under the Gnu Public License, open source, and designed such that it can easily be modified and extended for individual needs, it is suitable not only for technically oriented Linux users, but also for students, researchers on small budgets, and universities in developing countries. The software includes a high-level scripting language, a library for the programming language C, and a questionnaire presenter. The software easily integrates with other open source tools, such as the statistical software package R. PsyToolkit is designed to work with external hardware (including IoLab and Cedrus response keyboards and two common digital input/output boards) and to support millisecond timing precision. Four in-depth examples explain the basic functionality of PsyToolkit. Example 1 demonstrates a stimulus-response compatibility experiment. Example 2 demonstrates a novel mouse-controlled visual search experiment. Example 3 shows how to control light emitting diodes using PsyToolkit, and Example 4 shows how to build a light-detection sensor. The last two examples explain the electronic hardware setup such that they can even be used with other software packages.

Shippingport Station Decommissioning Project (SSDP): configuration control system and project activity controls

International Nuclear Information System (INIS)

Mullee, G.R.

1986-01-01

The SSDP has been using a Configuration Control system as a significant element in the management plan for the safe and effective performance of the project. The objective of the Configuration Control system is to control the physical plant configuration, system status, work schedules, status tracking, and day-to-day problem resolution. Prior to the Decommissioning Operations Contractor (DOC) assuming operational responsibility for the Shippingport Plant, an assessment was made of the status of the configuration of the systems and related documentation. Action was taken as required to match the operating procedures and system documentation with the actual physical condition of the plant. During the first stage of the project, planning was put in place for subsequent decommissioning activities. This planning included defining organizational responsibilities, completing the necessary project instructions and procedures, and doing the planning and scheduling for the subsequent decommissioning phase activities. Detailed instructions for the performance of the various decommissioning tasks were prepared. Prior to the start of any work on a given Activity Package, a Work Authorization is required. The Work Authorization form provides a complete checklist to ensure that all necessary prerequisites are completed. A computerized Communications Configuration Control Information system monitors status including information on system status, tag-outs, radiological work permits, etc. An ongoing effort is being directed toward maintaining operating instructions and system schematics, etc. current as the Plant configuration changes. The experience with the Configuration Control System to date has been favorable

Co-simulation of dynamic systems in parallel and serial model configurations

International Nuclear Information System (INIS)

Sweafford, Trevor; Yoon, Hwan Sik

2013-01-01

Recent advancement in simulation software and computation hardware make it realizable to simulate complex dynamic systems comprised of multiple submodels developed in different modeling languages. The so-called co-simulation enables one to study various aspects of a complex dynamic system with heterogeneous submodels in a cost-effective manner. Among several different model configurations for co-simulation, synchronized parallel configuration is regarded to expedite the simulation process by simulation multiple sub models concurrently on a multi core processor. In this paper, computational accuracies as well as computation time are studied for three different co-simulation frameworks : integrated, serial, and parallel. for this purpose, analytical evaluations of the three different methods are made using the explicit Euler method and then they are applied to two-DOF mass-spring systems. The result show that while the parallel simulation configuration produces the same accurate results as the integrated configuration, results of the serial configuration, results of the serial configuration show a slight deviation. it is also shown that the computation time can be reduced by running simulation in the parallel configuration. Therefore, it can be concluded that the synchronized parallel simulation methodology is the best for both simulation accuracy and time efficiency.

NOAA Weather and Climate Toolkit (WCT)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA Weather and Climate Toolkit is an application that provides simple visualization and data export of weather and climatological data archived at NCDC. The...

A User Interface Toolkit for a Small Screen Device.

OpenAIRE

UOTILA, ALEKSI

2000-01-01

The appearance of different kinds of networked mobile devices and network appliances creates special requirements for user interfaces that are not met by existing widget based user interface creation toolkits. This thesis studies the problem domain of user interface creation toolkits for portable network connected devices. The portable nature of these devices places great restrictions on the user interface capabilities. One main characteristic of the devices is that they have small screens co...

Geant4 - A Simulation Toolkit

International Nuclear Information System (INIS)

2002-01-01

Geant4 is a toolkit for simulating the passage of particles through matter. It includes a complete range of functionality including tracking, geometry, physics models and hits. The physics processes offered cover a comprehensive range, including electromagnetic, hadronic and optical processes, a large set of long-lived particles, materials and elements, over a wide energy range starting, in some cases, from 250 eV and extending in others to the TeV energy range. it has been designed and constructed to expose the physics models utilized, to handle complex geometries, and to enable its easy adaptation for optimal use in different sets of applications. The toolkit is the result of a worldwide collaboration of physicists and software engineers. It has been created exploiting software engineering and object-oriented technology and implemented in the C++ programming language. It has been used in applications in particle physics, nuclear physics, accelerator design, space engineering and medical physics

GEANT4 A Simulation toolkit

CERN Document Server

Agostinelli, S; Amako, K; Apostolakis, John; Araújo, H M; Arce, P; Asai, M; Axen, D A; Banerjee, S; Barrand, G; Behner, F; Bellagamba, L; Boudreau, J; Broglia, L; Brunengo, A; Chauvie, S; Chuma, J; Chytracek, R; Cooperman, G; Cosmo, G; Degtyarenko, P V; Dell'Acqua, A; De Paola, G O; Dietrich, D D; Enami, R; Feliciello, A; Ferguson, C; Fesefeldt, H S; Folger, G; Foppiano, F; Forti, A C; Garelli, S; Giani, S; Giannitrapani, R; Gibin, D; Gómez-Cadenas, J J; González, I; Gracía-Abríl, G; Greeniaus, L G; Greiner, W; Grichine, V M; Grossheim, A; Gumplinger, P; Hamatsu, R; Hashimoto, K; Hasui, H; Heikkinen, A M; Howard, A; Hutton, A M; Ivanchenko, V N; Johnson, A; Jones, F W; Kallenbach, Jeff; Kanaya, N; Kawabata, M; Kawabata, Y; Kawaguti, M; Kelner, S; Kent, P; Kodama, T; Kokoulin, R P; Kossov, M; Kurashige, H; Lamanna, E; Lampen, T; Lara, V; Lefébure, V; Lei, F; Liendl, M; Lockman, W; Longo, F; Magni, S; Maire, M; Mecking, B A; Medernach, E; Minamimoto, K; Mora de Freitas, P; Morita, Y; Murakami, K; Nagamatu, M; Nartallo, R; Nieminen, P; Nishimura, T; Ohtsubo, K; Okamura, M; O'Neale, S W; O'Ohata, Y; Perl, J; Pfeiffer, A; Pia, M G; Ranjard, F; Rybin, A; Sadilov, S; Di Salvo, E; Santin, G; Sasaki, T; Savvas, N; Sawada, Y; Scherer, S; Sei, S; Sirotenko, V I; Smith, D; Starkov, N; Stöcker, H; Sulkimo, J; Takahata, M; Tanaka, S; Chernyaev, E; Safai-Tehrani, F; Tropeano, M; Truscott, P R; Uno, H; Urbàn, L; Urban, P; Verderi, M; Walkden, A; Wander, W; Weber, H; Wellisch, J P; Wenaus, T; Williams, D C; Wright, D; Yamada, T; Yoshida, H; Zschiesche, D

2003-01-01

Geant4 is a toolkit for simulating the passage of particles through matter. It includes a complete range of functionality including tracking, geometry, physics models and hits. The physics processes offered cover a comprehensive range, including electromagnetic, hadronic and optical processes, a large set of long-lived particles, materials and elements, over a wide energy range starting, in some cases, from 250 eV and extending in others to the TeV energy range. It has been designed and constructed to expose the physics models utilised, to handle complex geometries, and to enable its easy adaptation for optimal use in different sets of applications. The toolkit is the result of a worldwide collaboration of physicists and software engineers. It has been created exploiting software engineering and object-oriented technology and implemented in the C++ programming language. It has been used in applications in particle physics, nuclear physics, accelerator design, space engineering and medical physics.

Geant4 - A Simulation Toolkit

Energy Technology Data Exchange (ETDEWEB)

Wright, Dennis H

2002-08-09

GEANT4 is a toolkit for simulating the passage of particles through matter. it includes a complete range of functionality including tracking, geometry, physics models and hits. The physics processes offered cover a comprehensive range, including electromagnetic, hadronic and optical processes, a large set of long-lived particles, materials and elements, over a wide energy range starting, in some cases, from 250 eV and extending in others to the TeV energy range. it has been designed and constructed to expose the physics models utilized, to handle complex geometries, and to enable its easy adaptation for optimal use in different sets of applications. The toolkit is the result of a worldwide collaboration of physicists and software engineers. It has been created exploiting software engineering and object-oriented technology and implemented in the C++ programming language. It has been used in applications in particle physics, nuclear physics, accelerator design, space engineering and medical physics.

Field tests of a participatory ergonomics toolkit for Total Worker Health.

Science.gov (United States)

Nobrega, Suzanne; Kernan, Laura; Plaku-Alakbarova, Bora; Robertson, Michelle; Warren, Nicholas; Henning, Robert

2017-04-01

Growing interest in Total Worker Health ® (TWH) programs to advance worker safety, health and well-being motivated development of a toolkit to guide their implementation. Iterative design of a program toolkit occurred in which participatory ergonomics (PE) served as the primary basis to plan integrated TWH interventions in four diverse organizations. The toolkit provided start-up guides for committee formation and training, and a structured PE process for generating integrated TWH interventions. Process data from program facilitators and participants throughout program implementation were used for iterative toolkit design. Program success depended on organizational commitment to regular design team meetings with a trained facilitator, the availability of subject matter experts on ergonomics and health to support the design process, and retraining whenever committee turnover occurred. A two committee structure (employee Design Team, management Steering Committee) provided advantages over a single, multilevel committee structure, and enhanced the planning, communication, and teamwork skills of participants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Field tests of a participatory ergonomics toolkit for Total Worker Health

Science.gov (United States)

Kernan, Laura; Plaku-Alakbarova, Bora; Robertson, Michelle; Warren, Nicholas; Henning, Robert

2018-01-01

Growing interest in Total Worker Health® (TWH) programs to advance worker safety, health and well-being motivated development of a toolkit to guide their implementation. Iterative design of a program toolkit occurred in which participatory ergonomics (PE) served as the primary basis to plan integrated TWH interventions in four diverse organizations. The toolkit provided start-up guides for committee formation and training, and a structured PE process for generating integrated TWH interventions. Process data from program facilitators and participants throughout program implementation were used for iterative toolkit design. Program success depended on organizational commitment to regular design team meetings with a trained facilitator, the availability of subject matter experts on ergonomics and health to support the design process, and retraining whenever committee turnover occurred. A two committee structure (employee Design Team, management Steering Committee) provided advantages over a single, multilevel committee structure, and enhanced the planning, communication, and team-work skills of participants. PMID:28166897

A Toolkit For Storage Qos Provisioning For Data-Intensive Applications

Directory of Open Access Journals (Sweden)

Renata Słota

2012-01-01

Full Text Available This paper describes a programming toolkit developed in the PL-Grid project, named QStorMan, which supports storage QoS provisioning for data-intensive applications in distributed environments. QStorMan exploits knowledge-oriented methods for matching storage resources to non-functional requirements, which are defined for a data-intensive application. In order to support various usage scenarios, QStorMan provides two interfaces, such as programming libraries or a web portal. The interfaces allow to define the requirements either directly in an application source code or by using an intuitive graphical interface. The first way provides finer granularity, e.g., each portion of data processed by an application can define a different set of requirements. The second method is aimed at legacy applications support, which source code can not be modified. The toolkit has been evaluated using synthetic benchmarks and the production infrastructure of PL-Grid, in particular its storage infrastructure, which utilizes the Lustre file system.

Database foundation for the configuration management of the CERN accelerator controls systems

International Nuclear Information System (INIS)

Zaharieva, Z.; Martin Marquez, M.; Peryt, M.

2012-01-01

The Controls Configuration Database (CCDB) and its interfaces have been developed over the last 25 years in order to become nowadays the basis for the Configuration Management of the Control System for all accelerators at CERN. The CCDB contains data for all configuration items and their relationships, required for the correct functioning of the Control System. The configuration items are quite heterogeneous, depicting different areas of the Control System - ranging from 3000 Front-End Computers, 75000 software devices allowing remote control of the accelerators, to valid states of the Accelerators Timing System. The article will describe the different areas of the CCDB, their inter-dependencies and the challenges to establish the data model for such a diverse configuration management database, serving a multitude of clients. The CCDB tracks the life of the configuration items by allowing their clear identification, triggering of change management processes as well as providing status accounting and audits. This required the development and implementation of a combination of tailored processes and tools. The Controls System is a data-driven one - the data stored in the CCDB is extracted and propagated to the controls hardware in order to configure it remotely. Therefore a special attention is placed on data security and data integrity as an incorrectly configured item can have a direct impact on the operation of the accelerators. (authors)

Database Foundation For The Configuration Management Of The CERN Accelerator Controls Systems

CERN Document Server

Zaharieva, Z; Peryt, M

2011-01-01

The Controls Configuration Database (CCDB) and its interfaces have been developed over the last 25 years in order to become nowadays the basis for the Configuration Management of the Controls System for all accelerators at CERN. The CCDB contains data for all configuration items and their relationships, required for the correct functioning of the Controls System. The configuration items are quite heterogeneous, depicting different areas of the Controls System – ranging from 3000 Front-End Computers, 75 000 software devices allowing remote control of the accelerators, to valid states of the Accelerators Timing System. The article will describe the different areas of the CCDB, their interdependencies and the challenges to establish the data model for such a diverse configuration management database, serving a multitude of clients. The CCDB tracks the life of the configuration items by allowing their clear identification, triggering of change management processes as well as providing status accounting and aud...

Configuration Management File Manager Developed for Numerical Propulsion System Simulation

Science.gov (United States)

Follen, Gregory J.

1997-01-01

One of the objectives of the High Performance Computing and Communication Project's (HPCCP) Numerical Propulsion System Simulation (NPSS) is to provide a common and consistent way to manage applications, data, and engine simulations. The NPSS Configuration Management (CM) File Manager integrated with the Common Desktop Environment (CDE) window management system provides a common look and feel for the configuration management of data, applications, and engine simulations for U.S. engine companies. In addition, CM File Manager provides tools to manage a simulation. Features include managing input files, output files, textual notes, and any other material normally associated with simulation. The CM File Manager includes a generic configuration management Application Program Interface (API) that can be adapted for the configuration management repositories of any U.S. engine company.

Application of the SHARP Toolkit to Sodium-Cooled Fast Reactor Challenge Problems

Energy Technology Data Exchange (ETDEWEB)

Shemon, E. R. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Yu, Y. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Kim, T. K. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division

2017-09-30

The Simulation-based High-efficiency Advanced Reactor Prototyping (SHARP) toolkit is under development by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign of the U.S. Department of Energy, Office of Nuclear Energy. To better understand and exploit the benefits of advanced modeling simulations, the NEAMS Campaign initiated the “Sodium-Cooled Fast Reactor (SFR) Challenge Problems” task, which include the assessment of hot channel factors (HCFs) and the demonstration of zooming capability using the SHARP toolkit. If both challenge problems are resolved through advanced modeling and simulation using the SHARP toolkit, the economic competitiveness of a SFR can be significantly improved. The efforts in the first year of this project focused on the development of computational models, meshes, and coupling procedures for multi-physics calculations using the neutronics (PROTEUS) and thermal-hydraulic (Nek5000) components of the SHARP toolkit, as well as demonstration of the HCF calculation capability for the 100 MWe Advanced Fast Reactor (AFR-100) design. Testing the feasibility of the SHARP zooming capability is planned in FY 2018. The HCFs developed for the earlier SFRs (FFTF, CRBR, and EBR-II) were reviewed, and a subset of these were identified as potential candidates for reduction or elimination through high-fidelity simulations. A one-way offline coupling method was used to evaluate the HCFs where the neutronics solver PROTEUS computes the power profile based on an assumed temperature, and the computational fluid dynamics solver Nek5000 evaluates the peak temperatures using the neutronics power profile. If the initial temperature profile used in the neutronics calculation is reasonably accurate, the one-way offline method is valid because the neutronics power profile has weak dependence on small temperature variation. In order to get more precise results, the proper temperature profile for initial neutronics calculations was obtained from the

Developing Climate Resilience Toolkit Decision Support Training Sectio

Science.gov (United States)

Livezey, M. M.; Herring, D.; Keck, J.; Meyers, J. C.

2014-12-01

The Climate Resilience Toolkit (CRT) is a Federal government effort to address the U.S. President's Climate Action Plan and Executive Order for Climate Preparedness. The toolkit will provide access to tools and products useful for climate-sensitive decision making. To optimize the user experience, the toolkit will also provide access to training materials. The National Oceanic and Atmospheric Administration (NOAA) has been building a climate training capability for 15 years. The target audience for the training has historically been mainly NOAA staff with some modified training programs for external users and stakeholders. NOAA is now using this climate training capacity for the CRT. To organize the CRT training section, we collaborated with the Association of Climate Change Officers to determine the best strategy and identified four additional complimentary skills needed for successful decision making: climate literacy, environmental literacy, risk assessment and management, and strategic execution and monitoring. Developing the climate literacy skills requires knowledge of climate variability and change, as well as an introduction to the suite of available products and services. For the development of an environmental literacy category, specific topics needed include knowledge of climate impacts on specific environmental systems. Climate risk assessment and management introduces a process for decision making and provides knowledge on communication of climate information and integration of climate information in planning processes. The strategic execution and monitoring category provides information on use of NOAA climate products, services, and partnership opportunities for decision making. In order to use the existing training modules, it was necessary to assess their level of complexity, catalog them, and develop guidance for users on a curriculum to take advantage of the training resources to enhance their learning experience. With the development of this CRT

Newnes electronics toolkit

CERN Document Server

Phillips, Geoff

2013-01-01

Newnes Electronics Toolkit brings together fundamental facts, concepts, and applications of electronic components and circuits, and presents them in a clear, concise, and unambiguous format, to provide a reference book for engineers. The book contains 10 chapters that discuss the following concepts: resistors, capacitors, inductors, semiconductors, circuit concepts, electromagnetic compatibility, sound, light, heat, and connections. The engineer's job does not end when the circuit diagram is completed; the design for the manufacturing process is just as important if volume production is to be

A Qualitative Evaluation of Web-Based Cancer Care Quality Improvement Toolkit Use in the Veterans Health Administration.

Science.gov (United States)

Bowman, Candice; Luck, Jeff; Gale, Randall C; Smith, Nina; York, Laura S; Asch, Steven

2015-01-01

Disease severity, complexity, and patient burden highlight cancer care as a target for quality improvement (QI) interventions. The Veterans Health Administration (VHA) implemented a series of disease-specific online cancer care QI toolkits. To describe characteristics of the toolkits, target users, and VHA cancer care facilities that influenced toolkit access and use and assess whether such resources were beneficial for users. Deductive content analysis of detailed notes from 94 telephone interviews with individuals from 48 VHA facilities. We evaluated toolkit access and use across cancer types, participation in learning collaboratives, and affiliation with VHA cancer care facilities. The presence of champions was identified as a strong facilitator of toolkit use, and learning collaboratives were important for spreading information about toolkit availability. Identified barriers included lack of personnel and financial resources and complicated approval processes to support tool use. Online cancer care toolkits are well received across cancer specialties and provider types. Clinicians, administrators, and QI staff may benefit from the availability of toolkits as they become more reliant on rapid access to strategies that support comprehensive delivery of evidence-based care. Toolkits should be considered as a complement to other QI approaches.

A documentation tool for product configuration systems - improving the documentation task

DEFF Research Database (Denmark)

Hvam, Lars; Jensen, Klaes Ladeby

2005-01-01

's experience with the procedure and the hitherto empirical experience from companies having applied the procedure have revealed that there is a need for an IT-based docu-mentation tool to support the process of constructing product configuration systems. Time can be saved by letting a documentation tool handle......Configuration systems are increasingly applied to automate the configuration of complex products. A configuration system is an expert system designed to combine specified modules according to constraints. The constraints are stored as product data and rules in a product model, and one of the most...... essential tasks is thus to develop a complete and consistent product model which can reflect the actual product. A procedure for building product models has been developed at the Centre for Product Modelling (CPM), and the pro-cedure has been successfully applied in several industrial companies. CPM...

Expected and Realized Costs and Benefits from Implementing Product Configuration Systems

DEFF Research Database (Denmark)

Edwards, Kasper

2010-01-01

Product configuration systems (PCS) are a technology well suited for mass customization and support the task of configuring the product to the individual customer’s needs. PCS are at the same time complex software systems that may be tailored to solve a variety of problems for a firm, e.......g. supporting the quotation process or validating the structure of a product. This paper reports findings from a study of 12 Danish firms, which at the time of the study have implemented or are in the process of implementing product configuration systems. 12 costs and 12 benefits are identified in literature...... organization. It is observed that product configuration projects are treated as simple technical projects although they should be regarded as organizational change projects....

An Interaction Measure for Control Configuration Selection for Multivariable Bilinear Systems

DEFF Research Database (Denmark)

Shaker, Hamid Reza; Stoustrup, Jakob

2013-01-01

are needed to be controlled, are nonlinear and linear models are insufficient to describe the behavior of the processes. The focus of this paper is on the problem of control configuration selection for a class of nonlinear systems which is known as bilinear systems. A gramian-based interaction measure...... for control configuration selection of MIMO bilinear processes is described. In general, most of the results on the control configuration selection, which have been proposed so far, can only support linear systems. The proposed gramian-based interaction measure not only supports bilinear processes but also...

Overview and Meteorological Validation of the Wind Integration National Dataset toolkit

Energy Technology Data Exchange (ETDEWEB)

Draxl, C. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hodge, B. M. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Clifton, A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); McCaa, J. [3TIER by VAisala, Seattle, WA (United States)

2015-04-13

The Wind Integration National Dataset (WIND) Toolkit described in this report fulfills these requirements, and constitutes a state-of-the-art national wind resource data set covering the contiguous United States from 2007 to 2013 for use in a variety of next-generation wind integration analyses and wind power planning. The toolkit is a wind resource data set, wind forecast data set, and wind power production and forecast data set derived from the Weather Research and Forecasting (WRF) numerical weather prediction model. WIND Toolkit data are available online for over 116,000 land-based and 10,000 offshore sites representing existing and potential wind facilities.

A highly versatile and easily configurable system for plant electrophysiology.

Science.gov (United States)

Gunsé, Benet; Poschenrieder, Charlotte; Rankl, Simone; Schröeder, Peter; Rodrigo-Moreno, Ana; Barceló, Juan

2016-01-01

In this study we present a highly versatile and easily configurable system for measuring plant electrophysiological parameters and ionic flow rates, connected to a computer-controlled highly accurate positioning device. The modular software used allows easy customizable configurations for the measurement of electrophysiological parameters. Both the operational tests and the experiments already performed have been fully successful and rendered a low noise and highly stable signal. Assembly, programming and configuration examples are discussed. The system is a powerful technique that not only gives precise measuring of plant electrophysiological status, but also allows easy development of ad hoc configurations that are not constrained to plant studies. •We developed a highly modular system for electrophysiology measurements that can be used either in organs or cells and performs either steady or dynamic intra- and extracellular measurements that takes advantage of the easiness of visual object-oriented programming.•High precision accuracy in data acquisition under electrical noisy environments that allows it to run even in a laboratory close to electrical equipment that produce electrical noise.•The system makes an improvement of the currently used systems for monitoring and controlling high precision measurements and micromanipulation systems providing an open and customizable environment for multiple experimental needs.

Brayton Isotope Power System. Phase I. (Ground demonstration system) Configuration Control Document (CCD)

International Nuclear Information System (INIS)

1976-01-01

The configuration control document (CCD) defines the BIPS-GDS configuration. The GDS configuration is similar to a conceptual flight system design, referred to as the BIPS-FS, which is discussed in App. I. The BIPS is being developed by ERDA as a 500 to 2000 W(e), 7-y life, space power system utilizing a closed Brayton cycle gas turbine engine to convert thermal energy (from an isotope heat source) to electrical energy at a net efficiency exceeding 25 percent. The CCD relates to Phase I of an ERDA Program to qualify a dynamic system for launch in the early 1980's. Phase I is a 35-month effort to provide an FS conceptual design and GDS design, fabrication, and test. The baseline is a 7-year life, 450-pound, 4800 W(t), 1300 W(e) system which will use two multihundred watt (MHW) isotope heat sources being developed

A configurable electrical capacitance tomography system using a combining electrode strategy

International Nuclear Information System (INIS)

Yang, Yunjie; Peng, Lihui

2013-01-01

Systematic investigation of a combining electrode strategy for electrical capacitance tomography (ECT) is carried out. A configurable digital and analogue mixed ECT system using a combining electrode strategy is presented. Compared to the traditional ECT system, the presented system can be configured flexibly as the traditional ECT sensor mode and the combining electrode mode by connecting a number of electrodes as a combined electrode. In particular, the combining electrode mode is increasing the number of capacitance measurement data and the amelioration of sensitivity distribution. An image reconstruction framework is proposed by configuring the presented ECT system as the corresponding sensor mode adaptive to the permittivity distribution to be reconstructed, which includes the traditional ECT sensor mode, the symmetric combining electrode mode, the asymmetric combining electrode mode and the mixed combining electrode mode. Both simulation and experimental results show that image reconstructions with better quality and robustness to measurement noise can be obtained under the proposed adaptive image reconstruction framework by using the presented configurable ECT system. (paper)

The Populist Toolkit

OpenAIRE

Ylä-Anttila, Tuukka Salu Santeri

2017-01-01

Populism has often been understood as a description of political parties and politicians, who have been labelled either populist or not. This dissertation argues that it is more useful to conceive of populism in action: as something that is done rather than something that is. I propose that the populist toolkit is a collection of cultural practices, which politicians and citizens use to make sense of and do politics, by claiming that ‘the people’ are opposed by a corrupt elite – a powerful cl...

ICAROUS: Integrated Configurable Architecture for Unmanned Systems

Science.gov (United States)

Consiglio, Maria C.

2016-01-01

NASA's Unmanned Aerial System (UAS) Traffic Management (UTM) project aims at enabling near-term, safe operations of small UAS vehicles in uncontrolled airspace, i.e., Class G airspace. A far-term goal of UTM research and development is to accommodate the expected rise in small UAS traffic density throughout the National Airspace System (NAS) at low altitudes for beyond visual line-of-sight operations. This video describes a new capability referred to as ICAROUS (Integrated Configurable Algorithms for Reliable Operations of Unmanned Systems), which is being developed under the auspices of the UTM project. ICAROUS is a software architecture comprised of highly assured algorithms for building safety-centric, autonomous, unmanned aircraft applications. Central to the development of the ICAROUS algorithms is the use of well-established formal methods to guarantee higher levels of safety assurance by monitoring and bounding the behavior of autonomous systems. The core autonomy-enabling capabilities in ICAROUS include constraint conformance monitoring and autonomous detect and avoid functions. ICAROUS also provides a highly configurable user interface that enables the modular integration of mission-specific software components.

STAR: Software Toolkit for Analysis Research

International Nuclear Information System (INIS)

Doak, J.E.; Prommel, J.M.; Whiteson, R.; Hoffbauer, B.L.; Thomas, T.R.; Helman, P.

1993-01-01

Analyzing vast quantities of data from diverse information sources is an increasingly important element for nonproliferation and arms control analysis. Much of the work in this area has used human analysts to assimilate, integrate, and interpret complex information gathered from various sources. With the advent of fast computers, we now have the capability to automate this process thereby shifting this burden away from humans. In addition, there now exist huge data storage capabilities which have made it possible to formulate large integrated databases comprising many thereabouts of information spanning a variety of subjects. We are currently designing a Software Toolkit for Analysis Research (STAR) to address these issues. The goal of STAR is to Produce a research tool that facilitates the development and interchange of algorithms for locating phenomena of interest to nonproliferation and arms control experts. One major component deals with the preparation of information. The ability to manage and effectively transform raw data into a meaningful form is a prerequisite for analysis by any methodology. The relevant information to be analyzed can be either unstructured text structured data, signals, or images. Text can be numerical and/or character, stored in raw data files, databases, streams of bytes, or compressed into bits in formats ranging from fixed, to character-delimited, to a count followed by content The data can be analyzed in real-time or batch mode. Once the data are preprocessed, different analysis techniques can be applied. Some are built using expert knowledge. Others are trained using data collected over a period of time. Currently, we are considering three classes of analyzers for use in our software toolkit: (1) traditional machine learning techniques, (2) the purely statistical system, and (3) expert systems

A toolkit for promoting healthy ageing

NARCIS (Netherlands)

Jeroen Knevel; Aly Gruppen

2016-01-01

This toolkit therefore focusses on self-management abilities. That means finding and maintaining effective, positive coping methods in relation to our health. We included many common and frequently discussed topics such as drinking, eating, physical exercise, believing in the future, resilience,

Fragment Impact Toolkit (FIT)

Energy Technology Data Exchange (ETDEWEB)

Shevitz, Daniel Wolf [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Key, Brian P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Garcia, Daniel B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-05

The Fragment Impact Toolkit (FIT) is a software package used for probabilistic consequence evaluation of fragmenting sources. The typical use case for FIT is to simulate an exploding shell and evaluate the consequence on nearby objects. FIT is written in the programming language Python and is designed as a collection of interacting software modules. Each module has a function that interacts with the other modules to produce desired results.

Web-based Toolkit for Dynamic Generation of Data Processors

Science.gov (United States)

Patel, J.; Dascalu, S.; Harris, F. C.; Benedict, K. K.; Gollberg, G.; Sheneman, L.

2011-12-01

All computation-intensive scientific research uses structured datasets, including hydrology and all other types of climate-related research. When it comes to testing their hypotheses, researchers might use the same dataset differently, and modify, transform, or convert it to meet their research needs. Currently, many researchers spend a good amount of time performing data processing and building tools to speed up this process. They might routinely repeat the same process activities for new research projects, spending precious time that otherwise could be dedicated to analyzing and interpreting the data. Numerous tools are available to run tests on prepared datasets and many of them work with datasets in different formats. However, there is still a significant need for applications that can comprehensively handle data transformation and conversion activities and help prepare the various processed datasets required by the researchers. We propose a web-based application (a software toolkit) that dynamically generates data processors capable of performing data conversions, transformations, and customizations based on user-defined mappings and selections. As a first step, the proposed solution allows the users to define various data structures and, in the next step, can select various file formats and data conversions for their datasets of interest. In a simple scenario, the core of the proposed web-based toolkit allows the users to define direct mappings between input and output data structures. The toolkit will also support defining complex mappings involving the use of pre-defined sets of mathematical, statistical, date/time, and text manipulation functions. Furthermore, the users will be allowed to define logical cases for input data filtering and sampling. At the end of the process, the toolkit is designed to generate reusable source code and executable binary files for download and use by the scientists. The application is also designed to store all data

The Wind Integration National Dataset (WIND) toolkit (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Caroline Draxl: NREL

2014-01-01

Regional wind integration studies require detailed wind power output data at many locations to perform simulations of how the power system will operate under high penetration scenarios. The wind datasets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as being time synchronized with available load profiles.As described in this presentation, the WIND Toolkit fulfills these requirements by providing a state-of-the-art national (US) wind resource, power production and forecast dataset.

Using a Configuration System to Design Toilets and Place Installation Shafts

DEFF Research Database (Denmark)

Kudsk, Anders; Hvam, Lars; Thuesen, Christian Langhoff

2013-01-01

The aim of this research is to discover how configuration systems can support a product's design process when a high degree of variation is required and a very open or endless space exists for possible configurations. The article is based on an industrial case involving a firm that wishes to offer...... of opportunities exist for using configuration systems in the construction industry. They also show that it can be done without fundamentally changing the present process. © Kudsk et al.; Licensee Bentham Open....

User's manual for the two-dimensional transputer graphics toolkit

Science.gov (United States)

Ellis, Graham K.

1988-01-01

The user manual for the 2-D graphics toolkit for a transputer based parallel processor is presented. The toolkit consists of a package of 2-D display routines that can be used for the simulation visualizations. It supports multiple windows, double buffered screens for animations, and simple graphics transformations such as translation, rotation, and scaling. The display routines are written in occam to take advantage of the multiprocessing features available on transputers. The package is designed to run on a transputer separate from the graphics board.

Preconceptual ABC design definition and system configuration layout

International Nuclear Information System (INIS)

Barthold, W.

1995-03-01

This document is the conceptual design document for the follow-on to the Molten Salt Breeder Reactor, known as the ABC type reactor. It addresses blanket design options, containment options, off-gas systems, drainage systems, and components/layouts of the primary, secondary, and tertiary systems, and it contains a number of diagrams for the configuration of the major systems

A toolkit for detecting technical surprise.

Energy Technology Data Exchange (ETDEWEB)

Trahan, Michael Wayne; Foehse, Mark C.

2010-10-01

The detection of a scientific or technological surprise within a secretive country or institute is very difficult. The ability to detect such surprises would allow analysts to identify the capabilities that could be a military or economic threat to national security. Sandia's current approach utilizing ThreatView has been successful in revealing potential technological surprises. However, as data sets become larger, it becomes critical to use algorithms as filters along with the visualization environments. Our two-year LDRD had two primary goals. First, we developed a tool, a Self-Organizing Map (SOM), to extend ThreatView and improve our understanding of the issues involved in working with textual data sets. Second, we developed a toolkit for detecting indicators of technical surprise in textual data sets. Our toolkit has been successfully used to perform technology assessments for the Science & Technology Intelligence (S&TI) program.

Reliability analysis for dynamic configurations of systems with three failure modes

International Nuclear Information System (INIS)

Pham, Hoang

1999-01-01

Analytical models for computing the reliability of dynamic configurations of systems, such as majority and k-out-of-n, assuming that units and systems are subject to three types of failures: stuck-at-0, stuck-at-1, and stuck-at-x are presented in this paper. Formulas for determining the optimal design policies that maximize the reliability of dynamic k-out-of-n configurations subject to three types of failures are defined. The comparisons of the reliability modeling functions are also obtained. The optimum system size and threshold value k that minimize the expected cost of dynamic k-out-of-n configurations are also determined

Tank monitor and control system (TMACS) software configuration management plan; TOPICAL

International Nuclear Information System (INIS)

GLASSCOCK, J.A.

1999-01-01

This Software Configuration Management Plan (SCMP) describes the methodology for control of computer software developed and supported by the Systems Development and Integration (SD and I) organization of Lockheed Martin Services, Inc. (LMSI) for the Tank Monitor and Control System (TMACS). This plan controls changes to the software and configuration files used by TMACS. The controlled software includes the Gensym software package, Gensym knowledge base files developed for TMACS, C-language programs used by TMACS, the operating system on the production machine, language compilers, and all Windows NT commands and functions which affect the operating environment. The configuration files controlled include the files downloaded to the Acromag and Westronic field instruments

The Role of Configurational Entropy in Amorphous Systems

Directory of Open Access Journals (Sweden)

Kirsten A. Graeser

2010-05-01

Full Text Available Configurational entropy is an important parameter in amorphous systems. It is involved in the thermodynamic considerations, plays an important role in the molecular mobility calculations through its appearance in the Adam-Gibbs equation and provides information on the solubility increase of an amorphous form compared to its crystalline counterpart. This paper presents a calorimetric method which enables the scientist to quickly determine the values for the configurational entropy at any temperature and obtain the maximum of information from these measurements.

The interactive learning toolkit: technology and the classroom

Science.gov (United States)

Lukoff, Brian; Tucker, Laura

2011-04-01

Peer Instruction (PI) and Just-in-Time-Teaching (JiTT) have been shown to increase both students' conceptual understanding and problem-solving skills. However, the time investment for the instructor to prepare appropriate conceptual questions and manage student JiTT responses is one of the main implementation hurdles. To overcome this we have developed the Interactive Learning Toolkit (ILT), a course management system specifically designed to support PI and JiTT. We are working to integrate the ILT with a fully interactive classroom system where students can use their laptops and smartphones to respond to ConcepTests in class. The goal is to use technology to engage students in conceptual thinking both in and out of the classroom.

Automated Transportation Management System (ATMS) Configuration Management Plan. Revision 1

International Nuclear Information System (INIS)

Weidert, R.S.

1994-01-01

This document describes the Software Configuration Management (SCM) approach and procedures to be utilized in developing and maintaining the Automated Transportation Management System (ATMS). The configuration management procedures are necessary to ensure that any changes made to software and related documentation are consistent with ATMS goals and contained securely in a central library. This plan applies to all software and associated documentation used in producing ATMS V1.0 and ATMS V2.0 system

Texas Team: Academic Progression and IOM Toolkit.

Science.gov (United States)

Reid, Helen; Tart, Kathryn; Tietze, Mari; Joseph, Nitha Mathew; Easley, Carson

The Institute of Medicine (IOM) Future of Nursing report, identified eight recommendations for nursing to improve health care for all Americans. The Texas Team for Advancing Health Through Nursing embraced the challenge of implementing the recommendations through two diverse projects. One group conducted a broad, online survey of leadership, practice, and academia, focusing on the IOM recommendations. The other focused specifically on academic progression through the use of CABNET (Consortium for Advancing Baccalaureate Nursing Education in Texas) articulation agreements. The survey revealed a lack of knowledge and understanding of the IOM recommendations, prompting development of an online IOM toolkit. The articulation agreements provide a clear pathway for students to the RN-to-BSN degree students. The toolkit and articulation agreements provide rich resources for implementation of the IOM recommendations.

The effect of earthquake on architecture geometry with non-parallel system irregularity configuration

Science.gov (United States)

Teddy, Livian; Hardiman, Gagoek; Nuroji; Tudjono, Sri

2017-12-01

Indonesia is an area prone to earthquake that may cause casualties and damage to buildings. The fatalities or the injured are not largely caused by the earthquake, but by building collapse. The collapse of the building is resulted from the building behaviour against the earthquake, and it depends on many factors, such as architectural design, geometry configuration of structural elements in horizontal and vertical plans, earthquake zone, geographical location (distance to earthquake center), soil type, material quality, and construction quality. One of the geometry configurations that may lead to the collapse of the building is irregular configuration of non-parallel system. In accordance with FEMA-451B, irregular configuration in non-parallel system is defined to have existed if the vertical lateral force-retaining elements are neither parallel nor symmetric with main orthogonal axes of the earthquake-retaining axis system. Such configuration may lead to torque, diagonal translation and local damage to buildings. It does not mean that non-parallel irregular configuration should not be formed on architectural design; however the designer must know the consequence of earthquake behaviour against buildings with irregular configuration of non-parallel system. The present research has the objective to identify earthquake behaviour in architectural geometry with irregular configuration of non-parallel system. The present research was quantitative with simulation experimental method. It consisted of 5 models, where architectural data and model structure data were inputted and analyzed using the software SAP2000 in order to find out its performance, and ETAB2015 to determine the eccentricity occurred. The output of the software analysis was tabulated, graphed, compared and analyzed with relevant theories. For areas of strong earthquake zones, avoid designing buildings which wholly form irregular configuration of non-parallel system. If it is inevitable to design a

A graphical user interface (GUI) toolkit for the calculation of three-dimensional (3D) multi-phase biological effective dose (BED) distributions including statistical analyses.

Science.gov (United States)

Kauweloa, Kevin I; Gutierrez, Alonso N; Stathakis, Sotirios; Papanikolaou, Niko; Mavroidis, Panayiotis

2016-07-01

A toolkit has been developed for calculating the 3-dimensional biological effective dose (BED) distributions in multi-phase, external beam radiotherapy treatments such as those applied in liver stereotactic body radiation therapy (SBRT) and in multi-prescription treatments. This toolkit also provides a wide range of statistical results related to dose and BED distributions. MATLAB 2010a, version 7.10 was used to create this GUI toolkit. The input data consist of the dose distribution matrices, organ contour coordinates, and treatment planning parameters from the treatment planning system (TPS). The toolkit has the capability of calculating the multi-phase BED distributions using different formulas (denoted as true and approximate). Following the calculations of the BED distributions, the dose and BED distributions can be viewed in different projections (e.g. coronal, sagittal and transverse). The different elements of this toolkit are presented and the important steps for the execution of its calculations are illustrated. The toolkit is applied on brain, head & neck and prostate cancer patients, who received primary and boost phases in order to demonstrate its capability in calculating BED distributions, as well as measuring the inaccuracy and imprecision of the approximate BED distributions. Finally, the clinical situations in which the use of the present toolkit would have a significant clinical impact are indicated. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

LAIT: a local ancestry inference toolkit.

Science.gov (United States)

Hui, Daniel; Fang, Zhou; Lin, Jerome; Duan, Qing; Li, Yun; Hu, Ming; Chen, Wei

2017-09-06

Inferring local ancestry in individuals of mixed ancestry has many applications, most notably in identifying disease-susceptible loci that vary among different ethnic groups. Many software packages are available for inferring local ancestry in admixed individuals. However, most of these existing software packages require specific formatted input files and generate output files in various types, yielding practical inconvenience. We developed a tool set, Local Ancestry Inference Toolkit (LAIT), which can convert standardized files into software-specific input file formats as well as standardize and summarize inference results for four popular local ancestry inference software: HAPMIX, LAMP, LAMP-LD, and ELAI. We tested LAIT using both simulated and real data sets and demonstrated that LAIT provides convenience to run multiple local ancestry inference software. In addition, we evaluated the performance of local ancestry software among different supported software packages, mainly focusing on inference accuracy and computational resources used. We provided a toolkit to facilitate the use of local ancestry inference software, especially for users with limited bioinformatics background.

ECCE Toolkit: Prototyping Sensor-Based Interaction

Directory of Open Access Journals (Sweden)

Andrea Bellucci

2017-02-01

Full Text Available Building and exploring physical user interfaces requires high technical skills and hours of specialized work. The behavior of multiple devices with heterogeneous input/output channels and connectivity has to be programmed in a context where not only the software interface matters, but also the hardware components are critical (e.g., sensors and actuators. Prototyping physical interaction is hindered by the challenges of: (1 programming interactions among physical sensors/actuators and digital interfaces; (2 implementing functionality for different platforms in different programming languages; and (3 building custom electronic-incorporated objects. We present ECCE (Entities, Components, Couplings and Ecosystems, a toolkit for non-programmers that copes with these issues by abstracting from low-level implementations, thus lowering the complexity of prototyping small-scale, sensor-based physical interfaces to support the design process. A user evaluation provides insights and use cases of the kind of applications that can be developed with the toolkit.

Wind Integration National Dataset (WIND) Toolkit; NREL (National Renewable Energy Laboratory)

Energy Technology Data Exchange (ETDEWEB)

Draxl, Caroline; Hodge, Bri-Mathias

2015-07-14

A webinar about the Wind Integration National Dataset (WIND) Toolkit was presented by Bri-Mathias Hodge and Caroline Draxl on July 14, 2015. It was hosted by the Southern Alliance for Clean Energy. The toolkit is a grid integration data set that contains meteorological and power data at a 5-minute resolution across the continental United States for 7 years and hourly power forecasts.

System of ispFlash configuration

International Nuclear Information System (INIS)

Bourrion, Olivier

2003-01-01

The aim of this module is to allow the use of FPGA components instead of EPLD components which for an equivalent or even inferior capacity are more expensive. For instance, the idea is to replace CPLD components having 512 macro-cells by one FPGA spartan II of Xilinx. However, due to the configuration's volatility, one configuration means is needed to put under voltage. A solution appears to be the using of a high capacity Flash memory coupled to a CPLD of small size to comply with the FPGA configuration protocol; also, one has to provide an in situ configuration means for this memory. Obviously, a product having an equivalent functionality already exists, since Xilinx and ALTERA supply PROMs of serial configuration. Unfortunately, they are expensive and a dealer is implied while the FLASH, the small CPLD and the FPGA spartan II are currently available. In conclusion, by using this assembly, which requires a small supplementary surface and a delay of upmost 240 ms (for the largest FPGA 1 Mbit), one obtains a solution cheaper and more performing than an EPLD of high capacity

Formal verification an essential toolkit for modern VLSI design

CERN Document Server

Seligman, Erik; Kumar, M V Achutha Kiran

2015-01-01

Formal Verification: An Essential Toolkit for Modern VLSI Design presents practical approaches for design and validation, with hands-on advice for working engineers integrating these techniques into their work. Building on a basic knowledge of System Verilog, this book demystifies FV and presents the practical applications that are bringing it into mainstream design and validation processes at Intel and other companies. The text prepares readers to effectively introduce FV in their organization and deploy FV techniques to increase design and validation productivity. Presents formal verific

FY17Q4 Ristra project: Release Version 1.0 of a production toolkit

Energy Technology Data Exchange (ETDEWEB)

Hungerford, Aimee L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Daniel, David John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-21

The Next Generation Code project will release Version 1.0 of a production toolkit for multi-physics application development on advanced architectures. Features of this toolkit will include remap and link utilities, control and state manager, setup, visualization and I/O, as well as support for a variety of mesh and particle data representations. Numerical physics packages that operate atop this foundational toolkit will be employed in a multi-physics demonstration problem and released to the community along with results from the demonstration.

Development of a Multimedia Toolkit for Engineering Graphics Education

Directory of Open Access Journals (Sweden)

Moudar Zgoul

2009-09-01

Full Text Available This paper focuses upon the development of a multimedia toolkit to support the teaching of Engineering Graphics Course. The project used different elements for the toolkit; animations, videos and presentations which were then integrated in a dedicated internet website. The purpose of using these elements is to assist the students building and practicing the needed engineering skills at their own pace as a part of an e-Learning solution. Furthermore, this kit allows students to repeat and view the processes and techniques of graphical construction, and visualization as much as needed, allowing them to follow and practice on their own.

Multi-reactor power system configurations for multimegawatt nuclear electric propulsion

Science.gov (United States)

George, Jeffrey A.

1991-01-01

A modular, multi-reactor power system and vehicle configuration for piloted nuclear electric propulsion (NEP) missions to Mars is presented. Such a design could provide enhanced system and mission reliability, allowing a comfortable safety margin for early manned flights, and would allow a range of piloted and cargo missions to be performed with a single power system design. Early use of common power modules for cargo missions would also provide progressive flight experience and validation of standardized systems for use in later piloted applications. System and mission analysis are presented to compare single and multi-reactor configurations for piloted Mars missions. A conceptual design for the Hydra modular multi-reactor NEP vehicle is presented.

AutoMicromanager: A microscopy scripting toolkit for LABVIEW and other programming environments

Science.gov (United States)

Ashcroft, Brian Alan; Oosterkamp, Tjerk

2010-11-01

We present a scripting toolkit for the acquisition and analysis of a wide variety of imaging data by integrating the ease of use of various programming environments such as LABVIEW, IGOR PRO, MATLAB, SCILAB, and others. This toolkit is designed to allow the user to quickly program a variety of standard microscopy components for custom microscopy applications allowing much more flexibility than other packages. Included are both programming tools as well as graphical user interface classes allowing a standard, consistent, and easy to maintain scripting environment. This programming toolkit allows easy access to most commonly used cameras, stages, and shutters through the Micromanager project so the scripter can focus on their custom application instead of boilerplate code generation.

AutoMicromanager: a microscopy scripting toolkit for LABVIEW and other programming environments.

Science.gov (United States)

Ashcroft, Brian Alan; Oosterkamp, Tjerk

2010-11-01

We present a scripting toolkit for the acquisition and analysis of a wide variety of imaging data by integrating the ease of use of various programming environments such as LABVIEW, IGOR PRO, MATLAB, SCILAB, and others. This toolkit is designed to allow the user to quickly program a variety of standard microscopy components for custom microscopy applications allowing much more flexibility than other packages. Included are both programming tools as well as graphical user interface classes allowing a standard, consistent, and easy to maintain scripting environment. This programming toolkit allows easy access to most commonly used cameras, stages, and shutters through the Micromanager project so the scripter can focus on their custom application instead of boilerplate code generation.

An advanced configuration management system for full scope power plant simulators

International Nuclear Information System (INIS)

Storm, J.; Goemann, A.

1996-01-01

In August 1993 KSG Kraftwerks-Simulator-Gesellschaft, Germany, awarded a contract to STN ATLAS Elektronik for the delivery of two full scope replica training simulators for the German BWR plants Isar 1 and Philipsburg 1, known as the double simulator project S30 (S31/S32). For both projects a computer based Configuration Management System (CMS) was required to overcome deficiencies of older simulator systems in terms of limited upgrade and maintenance capabilities and incomplete documentation. The CMS allows complete control over the entire simulator system covering all software- and hardware-items and therewith exceed quality assurance requirements as defined in ISO 9000-3 which gives recommendations for software configuration management only. The system is realized under the project using the UNIX based relational database system EMPRESS and is in use as a development- and maintenance-tool to improve simulator quality and ensure simulator configuration integrity

Integrating surgical robots into the next medical toolkit.

Science.gov (United States)

Lai, Fuji; Entin, Eileen

2006-01-01

Surgical robots hold much promise for revolutionizing the field of surgery and improving surgical care. However, despite the potential advantages they offer, there are multiple barriers to adoption and integration into practice that may prevent these systems from realizing their full potential benefit. This study elucidated some of the most salient considerations that need to be addressed for integration of new technologies such as robotic systems into the operating room of the future as it evolves into a complex system of systems. We conducted in-depth interviews with operating room team members and other stakeholders to identify potential barriers in areas of workflow, teamwork, training, clinical acceptance, and human-system interaction. The findings of this study will inform an approach for the design and integration of robotics and related computer-assisted technologies into the next medical toolkit for "computer-enhanced surgery" to improve patient safety and healthcare quality.

VIDE: The Void IDentification and Examination toolkit

Science.gov (United States)

Sutter, P. M.; Lavaux, G.; Hamaus, N.; Pisani, A.; Wandelt, B. D.; Warren, M.; Villaescusa-Navarro, F.; Zivick, P.; Mao, Q.; Thompson, B. B.

2015-03-01

We present VIDE, the Void IDentification and Examination toolkit, an open-source Python/C++ code for finding cosmic voids in galaxy redshift surveys and N-body simulations, characterizing their properties, and providing a platform for more detailed analysis. At its core, VIDE uses a substantially enhanced version of ZOBOV (Neyinck 2008) to calculate a Voronoi tessellation for estimating the density field and performing a watershed transform to construct voids. Additionally, VIDE provides significant functionality for both pre- and post-processing: for example, VIDE can work with volume- or magnitude-limited galaxy samples with arbitrary survey geometries, or dark matter particles or halo catalogs in a variety of common formats. It can also randomly subsample inputs and includes a Halo Occupation Distribution model for constructing mock galaxy populations. VIDE uses the watershed levels to place voids in a hierarchical tree, outputs a summary of void properties in plain ASCII, and provides a Python API to perform many analysis tasks, such as loading and manipulating void catalogs and particle members, filtering, plotting, computing clustering statistics, stacking, comparing catalogs, and fitting density profiles. While centered around ZOBOV, the toolkit is designed to be as modular as possible and accommodate other void finders. VIDE has been in development for several years and has already been used to produce a wealth of results, which we summarize in this work to highlight the capabilities of the toolkit. VIDE is publicly available at http://bitbucket.org/cosmicvoids/vide_public and http://www.cosmicvoids.net.

BAT - The Bayesian Analysis Toolkit

CERN Document Server

Caldwell, Allen C; Kröninger, Kevin

2009-01-01

We describe the development of a new toolkit for data analysis. The analysis package is based on Bayes' Theorem, and is realized with the use of Markov Chain Monte Carlo. This gives access to the full posterior probability distribution. Parameter estimation, limit setting and uncertainty propagation are implemented in a straightforward manner. A goodness-of-fit criterion is presented which is intuitive and of great practical use.

Product configuration of infra structure systems for data centres

DEFF Research Database (Denmark)

Hvam, Lars; Christensen, Tim Teglgaard; Jensen, Søren Brogaard

2007-01-01

centres, and components and systems for these systems. At the heart of its mass customisation strategy are a module-based product range and the use of product configuration systems for sales and order processing. In addition, the company has implemented a manufacturing concept, which involves the mass...

The effects of system configuration and operating condition on the MCFC system efficiency

Energy Technology Data Exchange (ETDEWEB)

Kang, B.S. [Korea Electric Power Research Institute, Taejeon (Korea)

2001-07-01

The process simulation model of an externally reformed molten carbonate fuel cell (MCFC) system is used to analyze quantitatively the parametric effect on the system efficiency. In order to verify the MCFC process simulation model, the 25-kW system was analyzed on the basis of the experimental data and its calculated efficiency showed reasonable. The overall system efficiency of high-temperature fuel cell system, especially MCFC, can not be increased without the proper thermal integration between heat recovery units and additional power generation from auxiliary power generating units such as turbines. The simulation results show that the configuration of unit operators in a given system has great effect on the system efficiency while the system size and operating condition have slightly lower effect on it. Based on the system configuration, optimal operating condition including fuel, oxidant utilization, and recycle ratio can be specified to maximize the system efficiency. (author). 12 refs., 10 figs., 2 tabs.

Software Configuration Management Plan for the Sodium Removal System

International Nuclear Information System (INIS)

HILL, L.F.

2000-01-01

This document establishers the Software Configuration Management Plan (SCMP) for the software associated with the control system of the Sodium Removal System (SRS) located in the Interim Examination and Maintenance (IEM Cell) Facility of the FFTF Flux Test

Reference frame for Product Configuration

DEFF Research Database (Denmark)

Ladeby, Klaes Rohde; Oddsson, Gudmundur Valur

2011-01-01

a reference frame for configuration that permits 1) a more precise understanding of a configuration system, 2) a understanding of how the configuration system relate to other systems, and 3) a definition of the basic concepts in configuration. The total configuration system, together with the definition...

DYNAMIC CONFIGURATION OF THE COMPUTING NODES OF THE ALICE O2 SYSTEM

CERN Document Server

Pugdeethosapol, Krittaphat

2015-01-01

The ALICE (A Large Ion Collider Experiment) Collaboration is preparing major upgrades for the detectors in 2020 in order to take advantage of the increase of collision rate at up to 50 KHz in the LHC for Pb-Pb beams. Together with these upgrades, the ALICE Online and Offline computing systems are being redesigned and upgraded to a new common system called O2. The O2 system is made of a software framework and a computing facility. The concept of the framework consists of implementing an online reconstruction and archiving of the data of all reconstructed collisions to permanent data storage. The main objective is to achieve a high-throughput system on heterogeneous computing platforms. Our KMUTT team has taken the responsibility of designing of accomplishing the design of the Control, Configuration, and Monitoring (CCM) of the computing infrastructure. This thesis is focusing on Configuration. The configuration module should allow dynamic configuration of processes and environment parameters during runtime. ...

Configuring a fuel cell based residential combined heat and power system

Science.gov (United States)

Ahmed, Shabbir; Papadias, Dionissios D.; Ahluwalia, Rajesh K.

2013-11-01

The design and performance of a fuel cell based residential combined heat and power (CHP) system operating on natural gas has been analyzed. The natural gas is first converted to a hydrogen-rich reformate in a steam reformer based fuel processor, and the hydrogen is then electrochemically oxidized in a low temperature polymer electrolyte fuel cell to generate electric power. The heat generated in the fuel cell and the available heat in the exhaust gas is recovered to meet residential needs for hot water and space heating. Two fuel processor configurations have been studied. One of the configurations was explored to quantify the effects of design and operating parameters, which include pressure, temperature, and steam-to-carbon ratio in the fuel processor, and fuel utilization in the fuel cell. The second configuration applied the lessons from the study of the first configuration to increase the CHP efficiency. Results from the two configurations allow a quantitative comparison of the design alternatives. The analyses showed that these systems can operate at electrical efficiencies of ∼46% and combined heat and power efficiencies of ∼90%.

Development and application of a generic CFD toolkit covering the heat flows in combined solid-liquid systems with emphasis on the thermal design of HiLumi superconducting magnets

Science.gov (United States)

Bozza, Gennaro; Malecha, Ziemowit M.; Van Weelderen, Rob

2016-12-01

The main objective of this work is to develop a robust multi-region numerical toolkit for the modeling of heat flows in combined solid-liquid systems. Specifically heat transfer in complex cryogenic system geometries involving super-fluid helium. The incentive originates from the need to support the design of superconductive magnets in the framework of the HiLumi-LHC project (Brüning and Rossi, 2015) [1]. The intent is, instead of solving heat flows in restricted domains, to be able to model a full magnet section in one go including all relevant construction details as accurately as possible. The toolkit was applied to the so-called MQXF quadrupole magnet design. Parametrisation studies were used to find a compromise in thermal design and electro-mechanical construction constraints. The cooling performance is evaluated in terms of temperature margin of the magnets under full steady state heat load conditions and in terms of maximal sustainable load. We also present transient response to pulse heat loads of varying duration and power and the system response to time-varying cold source temperatures.

Preliminary analysis of advanced equilibrium configuration for the fusion-driven subcritical system

International Nuclear Information System (INIS)

Chu Delin; Wu Bin; Wu Yican

2003-01-01

The Fusion-Driven Subcritical System (FDS) is a subcritical nuclear energy system driven by fusion neutron source. In this paper, an advanced plasma configuration for FDS system has been proposed, which aims at high beta, high bootstrap current and good confinement. A fixed-boundary equilibrium code has been used to obtain ideal equilibrium configuration. In order to determine the feasibility of FDS operation, a two-dimensional time-dependent free boundary simulation code has been adopted to simulate time-scale evolution of plasma current profile and boundary position. By analyses, the Reversed Shear mode as the most attractive one has been recommended for the FDS equilibrium configuration design

Heart Failure: Self-care to Success: Development and evaluation of a program toolkit.

Science.gov (United States)

Bryant, Rebecca

2017-08-17

The Heart Failure: Self-care to Success toolkit was developed to assist NPs in empowering patients with heart failure (HF) to improve individual self-care behaviors. This article details the evolution of this toolkit for NPs, its effectiveness with patients with HF, and recommendations for future research and dissemination strategies.

The MOLGENIS toolkit: rapid prototyping of biosoftware at the push of a button.

Science.gov (United States)

Swertz, Morris A; Dijkstra, Martijn; Adamusiak, Tomasz; van der Velde, Joeri K; Kanterakis, Alexandros; Roos, Erik T; Lops, Joris; Thorisson, Gudmundur A; Arends, Danny; Byelas, George; Muilu, Juha; Brookes, Anthony J; de Brock, Engbert O; Jansen, Ritsert C; Parkinson, Helen

2010-12-21

There is a huge demand on bioinformaticians to provide their biologists with user friendly and scalable software infrastructures to capture, exchange, and exploit the unprecedented amounts of new *omics data. We here present MOLGENIS, a generic, open source, software toolkit to quickly produce the bespoke MOLecular GENetics Information Systems needed. The MOLGENIS toolkit provides bioinformaticians with a simple language to model biological data structures and user interfaces. At the push of a button, MOLGENIS' generator suite automatically translates these models into a feature-rich, ready-to-use web application including database, user interfaces, exchange formats, and scriptable interfaces. Each generator is a template of SQL, JAVA, R, or HTML code that would require much effort to write by hand. This 'model-driven' method ensures reuse of best practices and improves quality because the modeling language and generators are shared between all MOLGENIS applications, so that errors are found quickly and improvements are shared easily by a re-generation. A plug-in mechanism ensures that both the generator suite and generated product can be customized just as much as hand-written software. In recent years we have successfully evaluated the MOLGENIS toolkit for the rapid prototyping of many types of biomedical applications, including next-generation sequencing, GWAS, QTL, proteomics and biobanking. Writing 500 lines of model XML typically replaces 15,000 lines of hand-written programming code, which allows for quick adaptation if the information system is not yet to the biologist's satisfaction. Each application generated with MOLGENIS comes with an optimized database back-end, user interfaces for biologists to manage and exploit their data, programming interfaces for bioinformaticians to script analysis tools in R, Java, SOAP, REST/JSON and RDF, a tab-delimited file format to ease upload and exchange of data, and detailed technical documentation. Existing databases

A bottom-up approach to automatically configured Tango control systems

International Nuclear Information System (INIS)

Rubio-Manrique, S.; Beltran, D.; Costa, I.; Fernandez-Carreiras, D.; Gigante, J.V.; Klora, J.; Matilla, O.; Ranz, R.; Ribas, J.; Sanchez, O.

2012-01-01

Alba is the first synchrotron light source built in Spain. Most of Alba control system has been developed on top of Tango control system. An amount of 5531 devices are controlled in Alba accelerators (linac, booster and storage ring) using 150 Linux PCs. Alba maintains a central repository, so called 'Cabling and Controls database' (CCDB), which keeps the inventory of equipment, cables, connections and their configuration and technical specifications. The valuable information kept in this MySQL database enables some tools to automatically create and configure Tango devices and other software components of the control systems of Accelerators, beamlines and laboratories. This paper describes the process involved in this automatic setup

Marine Debris and Plastic Source Reduction Toolkit

Science.gov (United States)

Many plastic food service ware items originate on college and university campuses—in cafeterias, snack rooms, cafés, and eateries with take-out dining options. This Campus Toolkit is a detailed “how to” guide for reducing plastic waste on college campuses.

Matlab based Toolkits used to Interface with Optical Design Software for NASA's James Webb Space Telescope

Science.gov (United States)

Howard, Joseph

2007-01-01

The viewgraph presentation provides an introduction to the James Webb Space Telescope (JWST). The first part provides a brief overview of Matlab toolkits including CodeV, OSLO, and Zemax Toolkits. The toolkit overview examines purpose, layout, how Matlab gets data from CodeV, function layout, and using cvHELP. The second part provides examples of use with JWST, including wavefront sensitivities and alignment simulations.

Component configuration control system development at EBR-II

International Nuclear Information System (INIS)

Monson, L.R.; Stratton, R.C.

1984-01-01

One ofthe major programs being pursued by the EBR-II Division of Argonne National Laboratory is to improve the reliability of plant control and protection systems. This effort involves looking closely at the present state of the art and needs associated with plant diagnostic, control and protection systems. One of the areas of development at EBR-II involves a component configuration control system (CCCS). This system is a computerized control and planning aid for the nuclear power operator

Enhanced configuration of a water detritiation system; impact on ITER Isotope Separation System based cryogenic distillation

Energy Technology Data Exchange (ETDEWEB)

Cristescu, Ion, E-mail: ion.cristescu@kit.edu

2016-11-01

Highlights: • An enhanced configuration of ITER WDS has been developed. • The proposed configuration allows minimization of hazards due to the reduction of tritium inventory. • The load on the tritium recovery system (ITER ISS) is minimized with benefits on mitigation of the explosion hazards. - Abstract: Tritiated water is generated in the ITER systems by various sources and may contain deuterium and tritium at various concentrations. The reference process for the ITER Water Detritiation System is based on Combined Electrolysis Catalytic Exchange (CECE) configuration. During long time operation of the CECE process, the accumulation of deuterium in the electrolysis unit and consequently along the Liquid Phase Catalytic Exchange (LPCE) column is unavoidable with consequences on the overall detritiation factor of the system. Beside the deuterium issue in the process, the large amount of the tritiated water with tritium activity up to 500 Ci/kg in the electrolysis cells is a concern from the safety aspect of the plant. The enhanced configuration of a system for processing tritiated water allows mitigation of the effects due to deuterium accumulation and also reduction of tritium inventory within the electrolysis system. In addition the benefits concerning to the interface between the water detritiation system and tritium recovery based cryogenic distillation are also presented.

Guide to Using the WIND Toolkit Validation Code

Energy Technology Data Exchange (ETDEWEB)

Lieberman-Cribbin, W.; Draxl, C.; Clifton, A.

2014-12-01

In response to the U.S. Department of Energy's goal of using 20% wind energy by 2030, the Wind Integration National Dataset (WIND) Toolkit was created to provide information on wind speed, wind direction, temperature, surface air pressure, and air density on more than 126,000 locations across the United States from 2007 to 2013. The numerical weather prediction model output, gridded at 2-km and at a 5-minute resolution, was further converted to detail the wind power production time series of existing and potential wind facility sites. For users of the dataset it is important that the information presented in the WIND Toolkit is accurate and that errors are known, as then corrective steps can be taken. Therefore, we provide validation code written in R that will be made public to provide users with tools to validate data of their own locations. Validation is based on statistical analyses of wind speed, using error metrics such as bias, root-mean-square error, centered root-mean-square error, mean absolute error, and percent error. Plots of diurnal cycles, annual cycles, wind roses, histograms of wind speed, and quantile-quantile plots are created to visualize how well observational data compares to model data. Ideally, validation will confirm beneficial locations to utilize wind energy and encourage regional wind integration studies using the WIND Toolkit.

Configuration Management Program - a part of Integrated Management System

International Nuclear Information System (INIS)

Mancev, Bogomil; Yordanova, Vanja; Nenkova, Boyka

2014-01-01

The recently issued International Atomic Energy Agency (IAEA) publications (GS-R-3, GS-G-3.1 and GS-G-3.5) regarding Management Systems for Facilities and Activities define requirements for creation, introduction, evaluation and continuously improvement of the Management System, which unifies the safety, health, environment, security, quality and economic elements. According to GS-R-3 the Integrated Management System is based on defined processes identified in the enterprises: Managing, Basic and Supporting processes. At implementation of their activities, the organizations often apply other standards in their interrelations with suppliers and the parties concerned - ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007, regarding quality, environment and occupational health and safety management. The integration of the standards of both series ensure the observance of the common management principles that reflect the best practices of management as leadership, participation of the people, process approach, continuously improvement, systematical approach to the management and approach based on facts used at the making decisions. The main objective of the Integrated Management System introduction is to ensure safety considering the influence of all additional impacts taken together. The Integrated Management System is based on the process approach at implementation of the activities in nuclear power plant. The transition to the process oriented approach require long period of time, during which the distribution of the responsibilities is optimized up to the level that will satisfy the requirements, reach and maintain the stipulated objectives. The Configuration Management (CM) is an integrated management process by means of which conformity between design requirements, physical configuration and the plant documentation is ascertained and maintained during the entire life cycle of the facility. Processes within configuration management are not isolated, but are part of

Innovations and Challenges of Implementing a Glucose Gel Toolkit for Neonatal Hypoglycemia.

Science.gov (United States)

Hammer, Denise; Pohl, Carla; Jacobs, Peggy J; Kaufman, Susan; Drury, Brenda

2018-05-24

Transient neonatal hypoglycemia occurs most commonly in newborns who are small for gestational age, large for gestational age, infants of diabetic mothers, and late preterm infants. An exact blood glucose value has not been determined for neonatal hypoglycemia, and it is important to note that poor neurologic outcomes can occur if hypoglycemia is left untreated. Interventions that separate mothers and newborns, as well as use of formula to treat hypoglycemia, have the potential to disrupt exclusive breastfeeding. To determine whether implementation of a toolkit designed to support staff in the adaptation of the practice change for management of newborns at risk for hypoglycemia, that includes 40% glucose gel in an obstetric unit with a level 2 nursery will decrease admissions to the Intermediate Care Nursery, and increase exclusive breastfeeding. This descriptive study used a retrospective chart review for pre/postimplementation of the Management of Newborns at Risk for Hypoglycemia Toolkit (Toolkit) using a convenience sample of at-risk newborns in the first 2 days of life to evaluate the proposed outcomes. Following implementation of the Toolkit, at-risk newborns had a clinically but not statistically significant 6.5% increase in exclusive breastfeeding and a clinically but not statistically significant 5% decrease in admissions to the Intermediate Care Nursery. The Toolkit was designed for ease of staff use and to improve outcomes for the at-risk newborn. Future research includes replication at other level 2 and level 1 obstetric centers and investigation into the number of 40% glucose gel doses that can safely be administered.

Mass or Only "Niche Customization"? Why We Should Interpret Configuration Toolkits as Learning Instruments

OpenAIRE

Franke, Nikolaus; Hader, Christopher

2013-01-01

In order to configure individual products according to their own preferences, customers are required to know what they want. While most research simply assumes that consumers have sufficient preference insight to do so, a number of psychologically oriented scholars have recently voiced serious concerns about this assumption. They argue that decades of consumer behavior research have shown that most consumers in most product categories lack this knowledge. Not knowing what one wants means bein...

pypet: A Python Toolkit for Data Management of Parameter Explorations.

Science.gov (United States)

Meyer, Robert; Obermayer, Klaus

2016-01-01

pypet (Python parameter exploration toolkit) is a new multi-platform Python toolkit for managing numerical simulations. Sampling the space of model parameters is a key aspect of simulations and numerical experiments. pypet is designed to allow easy and arbitrary sampling of trajectories through a parameter space beyond simple grid searches. pypet collects and stores both simulation parameters and results in a single HDF5 file. This collective storage allows fast and convenient loading of data for further analyses. pypet provides various additional features such as multiprocessing and parallelization of simulations, dynamic loading of data, integration of git version control, and supervision of experiments via the electronic lab notebook Sumatra. pypet supports a rich set of data formats, including native Python types, Numpy and Scipy data, Pandas DataFrames, and BRIAN(2) quantities. Besides these formats, users can easily extend the toolkit to allow customized data types. pypet is a flexible tool suited for both short Python scripts and large scale projects. pypet's various features, especially the tight link between parameters and results, promote reproducible research in computational neuroscience and simulation-based disciplines.

A configurable component-based software system for magnetic field measurements

Energy Technology Data Exchange (ETDEWEB)

Nogiec, J.M.; DiMarco, J.; Kotelnikov, S.; Trombly-Freytag, K.; Walbridge, D.; Tartaglia, M.; /Fermilab

2005-09-01

A new software system to test accelerator magnets has been developed at Fermilab. The magnetic measurement technique involved employs a single stretched wire to measure alignment parameters and magnetic field strength. The software for the system is built on top of a flexible component-based framework, which allows for easy reconfiguration and runtime modification. Various user interface, data acquisition, analysis, and data persistence components can be configured to form different measurement systems that are tailored to specific requirements (e.g., involving magnet type or test stand). The system can also be configured with various measurement sequences or tests, each of them controlled by a dedicated script. It is capable of working interactively as well as executing a preselected sequence of tests. Each test can be parameterized to fit the specific magnet type or test stand requirements. The system has been designed with portability in mind and is capable of working on various platforms, such as Linux, Solaris, and Windows. It can be configured to use a local data acquisition subsystem or a remote data acquisition computer, such as a VME processor running VxWorks. All hardware-oriented components have been developed with a simulation option that allows for running and testing measurements in the absence of data acquisition hardware.

NPIP: A skew line needle configuration optimization system for HDR brachytherapy

International Nuclear Information System (INIS)

Siauw, Timmy; Cunha, Adam; Berenson, Dmitry; Atamtürk, Alper; Hsu, I-Chow; Goldberg, Ken; Pouliot, Jean

2012-01-01

Purpose: In this study, the authors introduce skew line needle configurations for high dose rate (HDR) brachytherapy and needle planning by integer program (NPIP), a computational method for generating these configurations. NPIP generates needle configurations that are specific to the anatomy of the patient, avoid critical structures near the penile bulb and other healthy structures, and avoid needle collisions inside the body. Methods: NPIP consisted of three major components: a method for generating a set of candidate needles, a needle selection component that chose a candidate needle subset to be inserted, and a dose planner for verifying that the final needle configuration could meet dose objectives. NPIP was used to compute needle configurations for prostate cancer data sets from patients previously treated at our clinic. NPIP took two user-parameters: a number of candidate needles, and needle coverage radius, δ. The candidate needle set consisted of 5000 needles, and a range of δ values was used to compute different needle configurations for each patient. Dose plans were computed for each needle configuration. The number of needles generated and dosimetry were analyzed and compared to the physician implant. Results: NPIP computed at least one needle configuration for every patient that met dose objectives, avoided healthy structures and needle collisions, and used as many or fewer needles than standard practice. These needle configurations corresponded to a narrow range of δ values, which could be used as default values if this system is used in practice. The average end-to-end runtime for this implementation of NPIP was 286 s, but there was a wide variation from case to case. Conclusions: The authors have shown that NPIP can automatically generate skew line needle configurations with the aforementioned properties, and that given the correct input parameters, NPIP can generate needle configurations which meet dose objectives and use as many or fewer

The Liquid Argon Software Toolkit (LArSoft): Goals, Status and Plan

Energy Technology Data Exchange (ETDEWEB)

Pordes, Rush [Fermilab; Snider, Erica [Fermilab

2016-08-17

LArSoft is a toolkit that provides a software infrastructure and algorithms for the simulation, reconstruction and analysis of events in Liquid Argon Time Projection Chambers (LArTPCs). It is used by the ArgoNeuT, LArIAT, MicroBooNE, DUNE (including 35ton prototype and ProtoDUNE) and SBND experiments. The LArSoft collaboration provides an environment for the development, use, and sharing of code across experiments. The ultimate goal is to develop fully automatic processes for reconstruction and analysis of LArTPC events. The toolkit is based on the art framework and has a well-defined architecture to interface to other packages, including to GEANT4 and GENIE simulation software and the Pandora software development kit for pattern recognition. It is designed to facilitate and support the evolution of algorithms including their transition to new computing platforms. The development of the toolkit is driven by the scientific stakeholders involved. The core infrastructure includes standard definitions of types and constants, means to input experiment geometries as well as meta and event- data in several formats, and relevant general utilities. Examples of algorithms experiments have contributed to date are: photon-propagation; particle identification; hit finding, track finding and fitting; electromagnetic shower identification and reconstruction. We report on the status of the toolkit and plans for future work.

NBII-SAIN Data Management Toolkit

Science.gov (United States)

Burley, Thomas E.; Peine, John D.

2009-01-01

percent of the cost of a spatial information system is associated with spatial data collection and management (U.S. General Accounting Office, 2003). These figures indicate that the resources (time, personnel, money) of many agencies and organizations could be used more efficiently and effectively. Dedicated and conscientious data management coordination and documentation is critical for reducing such redundancy. Substantial cost savings and increased efficiency are direct results of a pro-active data management approach. In addition, details of projects as well as data and information are frequently lost as a result of real-world occurrences such as the passing of time, job turnover, and equipment changes and failure. A standardized, well documented database allows resource managers to identify issues, analyze options, and ultimately make better decisions in the context of adaptive management (National Land and Water Resources Audit and the Australia New Zealand Land Information Council on behalf of the Australian National Government, 2003). Many environmentally focused, scientific, or natural resource management organizations collect and create both spatial and non-spatial data in some form. Data management appropriate for those data will be contingent upon the project goal(s) and objectives and thus will vary on a case-by-case basis. This project and the resulting Data Management Toolkit, hereafter referred to as the Toolkit, is therefore not intended to be comprehensive in terms of addressing all of the data management needs of all projects that contain biological, geospatial, and other types of data. The Toolkit emphasizes the idea of connecting a project's data and the related management needs to the defined project goals and objectives from the outset. In that context, the Toolkit presents and describes the fundamental components of sound data and information management that are common to projects involving biological, geospatial, and other related data

Agent-based models in economics a toolkit

CERN Document Server

Fagiolo, Giorgio; Gallegati, Mauro; Richiardi, Matteo; Russo, Alberto

2018-01-01

In contrast to mainstream economics, complexity theory conceives the economy as a complex system of heterogeneous interacting agents characterised by limited information and bounded rationality. Agent Based Models (ABMs) are the analytical and computational tools developed by the proponents of this emerging methodology. Aimed at students and scholars of contemporary economics, this book includes a comprehensive toolkit for agent-based computational economics, now quickly becoming the new way to study evolving economic systems. Leading scholars in the field explain how ABMs can be applied fruitfully to many real-world economic examples and represent a great advancement over mainstream approaches. The essays discuss the methodological bases of agent-based approaches and demonstrate step-by-step how to build, simulate and analyse ABMs and how to validate their outputs empirically using the data. They also present a wide set of applications of these models to key economic topics, including the business cycle, lab...

Manage system for internet of things of greenhouse based on GWT

Directory of Open Access Journals (Sweden)

Jizhang Wang

2018-06-01

Full Text Available In order to fit the different demands for the internet of things system of greenhouse environment monitoring and control, the greenhouse environment monitoring and control management system based on Google Web Toolkit (GWT was developed. Using remote method call (RPC AJAX as the communication method between browser and web server, the system realized the functions such as: configuration of acquisition and control parameters, the adaptive match of database between gateway and server, the adaptive diagnosis of monitoring parameters, the warning of monitoring parameters, the adaptive generation of interface, and so on. The functions of the system was tested the results shows that the WEB browser application and Android App can adaptively realize the greenhouse environment monitoring and control according to the information configuration. Keywords: Greenhouse, Internet of things, Monitoring and control system, Software

Space Station Freedom regenerative water recovery system configuration selection

Science.gov (United States)

Reysa, R.; Edwards, J.

1991-01-01

The Space Station Freedom (SSF) must recover water from various waste water sources to reduce 90 day water resupply demands for a four/eight person crew. The water recovery system options considered are summarized together with system configuration merits and demerits, resource advantages and disadvantages, and water quality considerations used to select the SSF water recovery system.

SwingStates: Adding state machines to Java and the Swing toolkit

OpenAIRE

Appert , Caroline; Beaudouin-Lafon , Michel

2008-01-01

International audience; This article describes SwingStates, a Java toolkit designed to facilitate the development of graphical user interfaces and bring advanced interaction techniques to the Java platform. SwingStates is based on the use of finite-state machines specified directly in Java to describe the behavior of interactive systems. State machines can be used to redefine the behavior of existing Swing widgets or, in combination with a new canvas widget that features a rich graphical mode...

Tank waste remediation system privatization infrastructure program configuration management implementation plan

International Nuclear Information System (INIS)

Schaus, P.S.

1998-01-01

This Configuration Management Implementation Plan (CMIP) was developed to assist in managing systems, structures, and components (SSCS), to facilitate the effective control and statusing of changes to SSCS, and to ensure technical consistency between design, performance, and operational requirements. Its purpose is to describe the approach Privatization Infrastructure will take in implementing a configuration management program, to identify the Program's products that need configuration management control, to determine the rigor of control, and to identify the mechanisms for that control

Energy Savings Performance Contract Energy Sales Agreement Toolkit

Energy Technology Data Exchange (ETDEWEB)

None

2017-08-14

FEMP developed the Energy Savings Performance Contracting Energy Sales Agreement (ESPC ESA) Toolkit to provide federal agency contracting officers and other acquisition team members with information that will facilitate the timely execution of ESPC ESA projects.

LBTool: A stochastic toolkit for leave-based key updates

DEFF Research Database (Denmark)

Yuksel, Ender; Nielson, Hanne Riis; Nielson, Flemming

2012-01-01

Quantitative techniques have been successfully employed in verification of information and communication systems. However, the use of such techniques are still rare in the area of security. In this paper, we present a toolkit that implements transient analysis on a key update method for wireless...... sensor networks. The analysis aims to find out the probability of a network key being compromised at a specific time point, which result in fluctuations over time for a specific key update method called Leave-based key update. For such a problem, the use of current tools is limited in many ways...

The Multiple-Patient Simulation Toolkit: Purpose, Process, and Pilot.

Science.gov (United States)

Beroz, Sabrina; Sullivan, Nancy; Kramasz, Vanessa; Morgan, Patricia

Educating nursing students to safely care for multiple patients has become an important but challenging focus for nurse educators. New graduate nurses are expected to manage care for multiple patients in a complex and multifaceted health care system. With patient safety as a priority, multiple-patient assignments are necessary in order for nursing students to learn how to effectively prioritize and delegate care. The purpose of this project was the construction of an adaptable and flexible template for the development of multiple-patient simulations. Through utilization, the template moved to a toolkit adding an operational guide, sample-populated template, and bibliography.

Development and formative evaluation of the e-Health Implementation Toolkit (e-HIT

Directory of Open Access Journals (Sweden)

Mair Frances

2010-10-01

Full Text Available Abstract Background The use of Information and Communication Technology (ICT or e-Health is seen as essential for a modern, cost-effective health service. However, there are well documented problems with implementation of e-Health initiatives, despite the existence of a great deal of research into how best to implement e-Health (an example of the gap between research and practice. This paper reports on the development and formative evaluation of an e-Health Implementation Toolkit (e-HIT which aims to summarise and synthesise new and existing research on implementation of e-Health initiatives, and present it to senior managers in a user-friendly format. Results The content of the e-HIT was derived by combining data from a systematic review of reviews of barriers and facilitators to implementation of e-Health initiatives with qualitative data derived from interviews of "implementers", that is people who had been charged with implementing an e-Health initiative. These data were summarised, synthesised and combined with the constructs from the Normalisation Process Model. The software for the toolkit was developed by a commercial company (RocketScience. Formative evaluation was undertaken by obtaining user feedback. There are three components to the toolkit - a section on background and instructions for use aimed at novice users; the toolkit itself; and the report generated by completing the toolkit. It is available to download from http://www.ucl.ac.uk/pcph/research/ehealth/documents/e-HIT.xls Conclusions The e-HIT shows potential as a tool for enhancing future e-Health implementations. Further work is needed to make it fully web-enabled, and to determine its predictive potential for future implementations.

Software configuration management

International Nuclear Information System (INIS)

Arribas Peces, E.; Martin Faraldo, P.

1993-01-01

Software Configuration Management is directed towards identifying system configuration at specific points of its life cycle, so as to control changes to the configuration and to maintain the integrity and traceability of the configuration throughout its life. SCM functions and tasks are presented in the paper

C-SHAPED CONFIGURATION OF THE ROOT CANAL SYSTEM – PROBLEMS AND SOLUTIONS.

Directory of Open Access Journals (Sweden)

Janet Kirilova

2014-06-01

Full Text Available Introduction: The patients with C-shaped configuration of the root canal system are definitely a problem in the everyday dental practice. The C-shaped configuration of the root canal can be seen in the mandibular and maxillary molars. The treatment of these teeth is very difficult. Purpose: To trace the treatment of clinical cases with C-shaped configuration of the root canal system. Material and methods: There are some different cases that are described with a C-shaped configuration of the root canal system with one, two, three and four separate root canals. Careful exploration of the floor of the pulp chamber, inspection with magnification, use of ultrasonic irrigation and a modified filling technique are of particular use. Results and Discussion: Clinical cases of a C-shaped pulp chamber and root canal system shows that this root canal aberration occurs in a wide variety and variability with a single root canal up to two, three and four separate root canals. The diameter of the root canal themselves also varies from very wide to such with a small diameter. Conclusions: Knowledge of the different anatomical variations will improve the endododntic practice of the general dental practitioners.

The nursing human resource planning best practice toolkit: creating a best practice resource for nursing managers.

Science.gov (United States)

Vincent, Leslie; Beduz, Mary Agnes

2010-05-01

Evidence of acute nursing shortages in urban hospitals has been surfacing since 2000. Further, new graduate nurses account for more than 50% of total nurse turnover in some hospitals and between 35% and 60% of new graduates change workplace during the first year. Critical to organizational success, first line nurse managers must have the knowledge and skills to ensure the accurate projection of nursing resource requirements and to develop proactive recruitment and retention programs that are effective, promote positive nursing socialization, and provide early exposure to the clinical setting. The Nursing Human Resource Planning Best Practice Toolkit project supported the creation of a network of teaching and community hospitals to develop a best practice toolkit in nursing human resource planning targeted at first line nursing managers. The toolkit includes the development of a framework including the conceptual building blocks of planning tools, manager interventions, retention and recruitment and professional practice models. The development of the toolkit involved conducting a review of the literature for best practices in nursing human resource planning, using a mixed method approach to data collection including a survey and extensive interviews of managers and completing a comprehensive scan of human resource practices in the participating organizations. This paper will provide an overview of the process used to develop the toolkit, a description of the toolkit contents and a reflection on the outcomes of the project.

Modeling the tagged-neutron UXO identification technique using the Geant4 toolkit

International Nuclear Information System (INIS)

Zhou, Y.; Zhu, X.; Wang, Y.; Mitra, S.

2012-01-01

It is proposed to use 14 MeV neutrons tagged by the associated particle neutron time-of-flight technique (APnTOF) to identify the fillers of unexploded ordnances (UXO) by characterizing their carbon, nitrogen and oxygen contents. To facilitate the design and construction of a prototype system, a preliminary simulation model was developed, using the Geant4 toolkit. This work established the toolkit environment for (a) generating tagged neutrons, (b) their transport and interactions within a sample to induce emission and detection of characteristic gamma-rays, and (c) 2D and 3D-image reconstruction of the interrogated object using the neutron and gamma-ray time-of-flight information. Using the modeling, this article demonstrates the novelty of the tagged-neutron approach for extracting useful signals with high signal-to-background discrimination of an object-of-interest from that of its environment. Simulations indicated that an UXO filled with the RDX explosive, hexogen (C 3 H 6 O 6 N 6 ), can be identified to a depth of 20 cm when buried in soil. (author)

Research standardization tools: pregnancy measures in the PhenX Toolkit.

Science.gov (United States)

Malinowski, Ann Kinga; Ananth, Cande V; Catalano, Patrick; Hines, Erin P; Kirby, Russell S; Klebanoff, Mark A; Mulvihill, John J; Simhan, Hyagriv; Hamilton, Carol M; Hendershot, Tabitha P; Phillips, Michael J; Kilpatrick, Lisa A; Maiese, Deborah R; Ramos, Erin M; Wright, Rosalind J; Dolan, Siobhan M

2017-09-01

Only through concerted and well-executed research endeavors can we gain the requisite knowledge to advance pregnancy care and have a positive impact on maternal and newborn health. Yet the heterogeneity inherent in individual studies limits our ability to compare and synthesize study results, thus impeding the capacity to draw meaningful conclusions that can be trusted to inform clinical care. The PhenX Toolkit (http://www.phenxtoolkit.org), supported since 2007 by the National Institutes of Health, is a web-based catalog of standardized protocols for measuring phenotypes and exposures relevant for clinical research. In 2016, a working group of pregnancy experts recommended 15 measures for the PhenX Toolkit that are highly relevant to pregnancy research. The working group followed the established PhenX consensus process to recommend protocols that are broadly validated, well established, nonproprietary, and have a relatively low burden for investigators and participants. The working group considered input from the pregnancy experts and the broader research community and included measures addressing the mode of conception, gestational age, fetal growth assessment, prenatal care, the mode of delivery, gestational diabetes, behavioral and mental health, and environmental exposure biomarkers. These pregnancy measures complement the existing measures for other established domains in the PhenX Toolkit, including reproductive health, anthropometrics, demographic characteristics, and alcohol, tobacco, and other substances. The preceding domains influence a woman's health during pregnancy. For each measure, the PhenX Toolkit includes data dictionaries and data collection worksheets that facilitate incorporation of the protocol into new or existing studies. The measures within the pregnancy domain offer a valuable resource to investigators and clinicians and are well poised to facilitate collaborative pregnancy research with the goal to improve patient care. To achieve this

Simulator configuration management system

International Nuclear Information System (INIS)

Faulent, J.; Brooks, J.G.

1990-01-01

The proposed revisions to ANS 3.5-1985 (Section 5) require Utilities to establish a simulator Configuration Management System (CMS). The proposed CMS must be capable of: Establishing and maintaining a simulator design database. Identifying and documenting differences between the simulator and its reference plant. Tracking the resolution of identified differences. Recording data to support simulator certification, testing and maintenance. This paper discusses a CMS capable of meeting the proposed requirements contained in ANS 3.5. The system will utilize a personal computer and a relational database management software to construct a simulator design database. The database will contain records to all reference nuclear plant data used in designing the simulator, as well as records identifying all the software, hardware and documentation making up the simulator. Using the relational powers of the database management software, reports will be generated identifying the impact of reference plant changes on the operation of the simulator. These reports can then be evaluated in terms of training needs to determine if changes are required for the simulator. If a change is authorized, the CMS will track the change through to its resolution and then incorporate the change into the simulator design database

A knowledge-based system for optimization of fuel reload configurations

International Nuclear Information System (INIS)

Galperin, A.; Kimhi, S.; Segev, M.

1989-01-01

The authors discuss a knowledge-based production system developed for generating optimal fuel reload configurations. The system was based on a heuristic search method and implemented in Common Lisp programming language. The knowledge base embodied the reactor physics, reactor operations, and a general approach to fuel management strategy. The data base included a description of the physical system involved, i.e., the core geometry and fuel storage. The fifth cycle of the Three Mile Island Unit 1 pressurized water reactor was chosen as a test case. Application of the system to the test case revealed a self-learning process by which a relatively large number of near-optimal configurations were discovered. Several selected solutions were subjected to detailed analysis and demonstrated excellent performance. To summarize, applicability of the proposed heuristic search method in the domain of nuclear fuel management was proved unequivocally

pypet: A Python Toolkit for Data Management of Parameter Explorations

Directory of Open Access Journals (Sweden)

Robert Meyer

2016-08-01

Full Text Available pypet (Python parameter exploration toolkit is a new multi-platform Python toolkit for managing numerical simulations. Sampling the space of model parameters is a key aspect of simulations and numerical experiments. pypet is designed to allow easy and arbitrary sampling of trajectories through a parameter space beyond simple grid searches.pypet collects and stores both simulation parameters and results in a single HDF5 file.This collective storage allows fast and convenient loading of data for further analyses.pypet provides various additional features such as multiprocessing and parallelization of simulations, dynamic loading of data, integration of git version control, and supervision of experiments via the electronic lab notebook Sumatra. pypet supports a rich set of data formats, including native Python types, Numpy and Scipy data, Pandas DataFrames, and BRIAN(2 quantities. Besides these formats, users can easily extend the toolkit to allow customized data types. pypet is a flexible tool suited for both short Python scripts and large scale projects. pypet's various features, especially the tight link between parameters and results, promote reproducible research in computational neuroscience and simulation-based disciplines.

Conceptualizing Embedded Configuration

DEFF Research Database (Denmark)

Oddsson, Gudmundur Valur; Hvam, Lars; Lysgaard, Ole

2006-01-01

and services. The general idea can be named embedded configuration. In this article we intend to conceptualize embedded configuration, what it is and is not. The difference between embedded configuration, sales configuration and embedded software is explained. We will look at what is needed to make embedded...... configuration systems. That will include requirements to product modelling techniques. An example with consumer electronics will illuminate the elements of embedded configuration in settings that most can relate to. The question of where embedded configuration would be relevant is discussed, and the current...

BRDF profile of Tyvek and its implementation in the Geant4 simulation toolkit.

Science.gov (United States)

Nozka, Libor; Pech, Miroslav; Hiklova, Helena; Mandat, Dusan; Hrabovsky, Miroslav; Schovanek, Petr; Palatka, Miroslav

2011-02-28

Diffuse and specular characteristics of the Tyvek 1025-BL material are reported with respect to their implementation in the Geant4 Monte Carlo simulation toolkit. This toolkit incorporates the UNIFIED model. Coefficients defined by the UNIFIED model were calculated from the bidirectional reflectance distribution function (BRDF) profiles measured with a scatterometer for several angles of incidence. Results were amended with profile measurements made by a profilometer.

Design and configuration of VME EPICS driver for He RFQ LLRF control system

Energy Technology Data Exchange (ETDEWEB)

Ahn, Tae-Sung; Jeong, Hae-Seong; Kim, Seong-Gu; Song, Young-Gi; Kim, Han-Sung; Seol, Kyung-Tae; Kwon, Hyeok-Jung; Cho, Yong-Sub [KOMAC, Gyeongju (Korea, Republic of)

2015-05-15

In Helium Radio-Frequency Quadrupole (He RFQ) development, the role of the high-power Radio-Frequency (RF) is very important because it is responsible for stable delivery and efficient acceleration of the beam. Since the amplitude control requirements of LLRF system are ±1 % (amplitude), we need a precise remote control system for this reason. This system is referred to as Low-Level RF (LLRF) control system. This paper describes the basic configuration tasks performed by hardware side and the software side to build the LLRF control system, and describes the future work of the He RFQ LLRF control system based on this paper. LLRF control system development at the He RFQ development stage is important. LLRF control system development requires the exact configuration of hardware and software. For each of the Layer configuration is completed on the software side and hardware modules: vxworks operating system installation, EPICS BASE compilation, module source code compiled, object file loading and execution on vxworks, EPICS IOC operation check, etc.

Improvements to Web Toolkits for Antelope-based Real-time Monitoring Systems

Science.gov (United States)

Lindquist, K. G.; Newman, R. L.; Vernon, F. L.; Hansen, T. S.; Orcutt, J.

2005-12-01

The Antelope Environmental Monitoring System (http://www.brtt.com) is a robust middleware architecture for near-real-time data collection, analysis, archiving and distribution. Antelope has an extensive toolkit allowing users to interact directly with their datasets. A rudimentary interface was developed in previous work between Antelope and the web-scripting language PHP (The PHP language is described in more detail at http://www.php.net). This interface allowed basic application development for remote access to and interaction with near-real-time data through a World Wide Web interface. We have added over 70 new functions for the Antelope interface to PHP, providing a solid base for web-scripting of near-real-time Antelope database applications. In addition, we have designed a new structure for web sites to be created from the Antelope platform, including PHP applications and Perl CGI scripts as well as static pages. Finally we have constructed the first version of the dbwebproject program, designed to dynamically create and maintain web-sites from specified recipes. These tools have already proven valuable for the creation of web tools for the dissemination of and interaction with near-real-time data streams from multi-signal-domain real-time sensor networks. We discuss current and future directions of this work in the context of the ROADNet project. Examples and applications of these core tools are elaborated in a companion presentation in this session (Newman et al., AGU 2005, session IN06).

BIT: Biosignal Igniter Toolkit.

Science.gov (United States)

da Silva, Hugo Plácido; Lourenço, André; Fred, Ana; Martins, Raúl

2014-06-01

The study of biosignals has had a transforming role in multiple aspects of our society, which go well beyond the health sciences domains to which they were traditionally associated with. While biomedical engineering is a classical discipline where the topic is amply covered, today biosignals are a matter of interest for students, researchers and hobbyists in areas including computer science, informatics, electrical engineering, among others. Regardless of the context, the use of biosignals in experimental activities and practical projects is heavily bounded by the cost, and limited access to adequate support materials. In this paper we present an accessible, albeit versatile toolkit, composed of low-cost hardware and software, which was created to reinforce the engagement of different people in the field of biosignals. The hardware consists of a modular wireless biosignal acquisition system that can be used to support classroom activities, interface with other devices, or perform rapid prototyping of end-user applications. The software comprehends a set of programming APIs, a biosignal processing toolbox, and a framework for real time data acquisition and postprocessing. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Building Emergency Contraception Awareness among Adolescents. A Toolkit for Schools and Community-Based Organizations.

Science.gov (United States)

Simkin, Linda; Radosh, Alice; Nelsesteun, Kari; Silverstein, Stacy

This toolkit presents emergency contraception (EC) as a method to help adolescent women avoid pregnancy and abortion after unprotected sexual intercourse. The sections of this toolkit are designed to help increase your knowledge of EC and stay up to date. They provide suggestions for increasing EC awareness in the workplace, whether it is a school…

Business cases for product configuration systems

DEFF Research Database (Denmark)

Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars

In the recent years, product configuration systems (PCSs) have received greater attention from industries providing customized products as a response to increased demand to fulfil diverse customers’ needs for customized products. Before developing a PCS, a well-established business case has...... to be made in order to secure the success and delivery of the project as it will increase the commitment from the business side. This paper presents a framework for supporting the development of business cases for PCSs and discusses the experiences from multiple case studies benefiting from the suggested...

Inductrack III configuration--a maglev system for high loads

Science.gov (United States)

Post, Richard F

2013-11-12

Inductrack III configurations are suited for use in transporting heavy freight loads. Inductrack III addresses a problem associated with the cantilevered track of the Inductrack II configuration. The use of a cantilevered track could present mechanical design problems in attempting to achieve a strong enough track system such that it would be capable of supporting very heavy loads. In Inductrack III, the levitating portion of the track can be supported uniformly from below, as the levitating Halbach array used on the moving vehicle is a single-sided one, thus does not require the cantilevered track as employed in Inductrack II.

Guest editors' introduction to the 4th issue of Experimental Software and Toolkits (EST-4)

NARCIS (Netherlands)

Brand, van den M.G.J.; Kienle, H.M.; Mens, K.

2014-01-01

Experimental software and toolkits play a crucial role in computer science. Elsevier’s Science of Computer Programming special issues on Experimental Software and Toolkits (EST) provide a means for academic tool builders to get more visibility and credit for their work, by publishing a paper along

Numerical relativity in spherical coordinates with the Einstein Toolkit

Science.gov (United States)

Mewes, Vassilios; Zlochower, Yosef; Campanelli, Manuela; Ruchlin, Ian; Etienne, Zachariah B.; Baumgarte, Thomas W.

2018-04-01

Numerical relativity codes that do not make assumptions on spatial symmetries most commonly adopt Cartesian coordinates. While these coordinates have many attractive features, spherical coordinates are much better suited to take advantage of approximate symmetries in a number of astrophysical objects, including single stars, black holes, and accretion disks. While the appearance of coordinate singularities often spoils numerical relativity simulations in spherical coordinates, especially in the absence of any symmetry assumptions, it has recently been demonstrated that these problems can be avoided if the coordinate singularities are handled analytically. This is possible with the help of a reference-metric version of the Baumgarte-Shapiro-Shibata-Nakamura formulation together with a proper rescaling of tensorial quantities. In this paper we report on an implementation of this formalism in the Einstein Toolkit. We adapt the Einstein Toolkit infrastructure, originally designed for Cartesian coordinates, to handle spherical coordinates, by providing appropriate boundary conditions at both inner and outer boundaries. We perform numerical simulations for a disturbed Kerr black hole, extract the gravitational wave signal, and demonstrate that the noise in these signals is orders of magnitude smaller when computed on spherical grids rather than Cartesian grids. With the public release of our new Einstein Toolkit thorns, our methods for numerical relativity in spherical coordinates will become available to the entire numerical relativity community.

A Configurable, Object-Oriented, Transportation System Software Framework

Energy Technology Data Exchange (ETDEWEB)

KELLY,SUZANNE M.; MYRE,JOHN W.; PRICE,MARK H.; RUSSELL,ERIC D.; SCOTT,DAN W.

2000-08-01

The Transportation Surety Center, 6300, has been conducting continuing research into and development of information systems for the Configurable Transportation Security and Information Management System (CTSS) project, an Object-Oriented Framework approach that uses Component-Based Software Development to facilitate rapid deployment of new systems while improving software cost containment, development reliability, compatibility, and extensibility. The direction has been to develop a Fleet Management System (FMS) framework using object-oriented technology. The goal for the current development is to provide a software and hardware environment that will demonstrate and support object-oriented development commonly in the FMS Central Command Center and Vehicle domains.

Software Toolkits: Practical Aspects of the Internet of Things—A Survey

OpenAIRE

Wang, Feng; Hu, Liang; Zhou, Jin; Wu, Yang; Hu, Jiejun; Zhao, Kuo

2015-01-01

The Internet of Things (IoT) is neither science fiction nor industry hype; rather it is based on solid technological advances and visions of network ubiquity that are zealously being realized. The paper serves to provide guidance regarding the practical aspects of the IoT. Such guidance is largely missing in the current literature in which the focus has been more on research problems and less on issues describing how to set up an IoT system and what software toolkits are required. This paper ...

NASA Space Radiation Program Integrative Risk Model Toolkit

Science.gov (United States)

Kim, Myung-Hee Y.; Hu, Shaowen; Plante, Ianik; Ponomarev, Artem L.; Sandridge, Chris

2015-01-01

NASA Space Radiation Program Element scientists have been actively involved in development of an integrative risk models toolkit that includes models for acute radiation risk and organ dose projection (ARRBOD), NASA space radiation cancer risk projection (NSCR), hemocyte dose estimation (HemoDose), GCR event-based risk model code (GERMcode), and relativistic ion tracks (RITRACKS), NASA radiation track image (NASARTI), and the On-Line Tool for the Assessment of Radiation in Space (OLTARIS). This session will introduce the components of the risk toolkit with opportunity for hands on demonstrations. The brief descriptions of each tools are: ARRBOD for Organ dose projection and acute radiation risk calculation from exposure to solar particle event; NSCR for Projection of cancer risk from exposure to space radiation; HemoDose for retrospective dose estimation by using multi-type blood cell counts; GERMcode for basic physical and biophysical properties for an ion beam, and biophysical and radiobiological properties for a beam transport to the target in the NASA Space Radiation Laboratory beam line; RITRACKS for simulation of heavy ion and delta-ray track structure, radiation chemistry, DNA structure and DNA damage at the molecular scale; NASARTI for modeling of the effects of space radiation on human cells and tissue by incorporating a physical model of tracks, cell nucleus, and DNA damage foci with image segmentation for the automated count; and OLTARIS, an integrated tool set utilizing HZETRN (High Charge and Energy Transport) intended to help scientists and engineers study the effects of space radiation on shielding materials, electronics, and biological systems.

A toolkit for promoting healthy ageing

OpenAIRE

Knevel, Jeroen; Gruppen, Aly

2016-01-01

This toolkit therefore focusses on self-management abilities. That means finding and maintaining effective, positive coping methods in relation to our health. We included many common and frequently discussed topics such as drinking, eating, physical exercise, believing in the future, resilience, preventing loneliness and social participation. Besides some concise background information, we offer you a great diversity of exercises per theme which can help you discuss, assess, change or strengt...

Experimental Analysis of a Coupled Energy Harvesting System with Monostable and Bistable Configuration

International Nuclear Information System (INIS)

Hoffmann, D; Folkmer, B; Manoli, Y

2014-01-01

In this paper we present experimental results from an energy harvesting system with two coupled energy harvesters. The energy conversion mechanism of the two coupled energy harvesters is based on the electromagnetic principle. The coupling is generated by two magnets in a repulsive arrangement. In this manner a bistable configuration can be obtained if the gap between the magnets is sufficiently small. We demonstrate that the total power output can be increased in comparison to a linear reference system, if specific conditions are fulfilled. In this respect, the highest power output occurs in the nonlinear region of a monostable system configuration, mostly near the transition to a bistable configuration. On the other hand, the results also indicate, that a bistable operating mode does not necessarily enhance the power output of the coupled system

Development of a Human Physiologically Based Pharmacokinetic (PBPK Toolkit for Environmental Pollutants

Directory of Open Access Journals (Sweden)

Patricia Ruiz

2011-10-01

Full Text Available Physiologically Based Pharmacokinetic (PBPK models can be used to determine the internal dose and strengthen exposure assessment. Many PBPK models are available, but they are not easily accessible for field use. The Agency for Toxic Substances and Disease Registry (ATSDR has conducted translational research to develop a human PBPK model toolkit by recoding published PBPK models. This toolkit, when fully developed, will provide a platform that consists of a series of priority PBPK models of environmental pollutants. Presented here is work on recoded PBPK models for volatile organic compounds (VOCs and metals. Good agreement was generally obtained between the original and the recoded models. This toolkit will be available for ATSDR scientists and public health assessors to perform simulations of exposures from contaminated environmental media at sites of concern and to help interpret biomonitoring data. It can be used as screening tools that can provide useful information for the protection of the public.

77 FR 73022 - U.S. Environmental Solutions Toolkit

Science.gov (United States)

2012-12-07

... relevant to reducing air pollution from oil and natural gas production and processing. The Department of... environmental officials and foreign end-users of environmental technologies that will outline U.S. approaches to.... technologies. The Toolkit will support the President's National Export Initiative by fostering export...

Tank waste remediation system immobilized high-level waste storage project configuration management implementation plan

International Nuclear Information System (INIS)

Burgard, K.G.; Schaus, P.S.; Rossi, H.

1998-01-01

This Configuration Management Implementation Plan was developed to assist in the management of systems, structures, and components, to facilitate the effective control and statusing of changes to systems, structures, and components; and to ensure technical consistency between design, performance, and operational requirements. Its purpose is to describe the approach Project W-464 will take in implementing a configuration management control, to determine the rigor of control, and to identify the mechanisms for imposing that control.This Configuration Management Implementation Plan was developed to assist in the management of systems, structures, and components, to facilitate the effective control and statusing of changes to systems, structures, and components; and to ensure technical consistency between design, performance, and operational requirements. Its purpose is to describe the approach Project W-464 will take in implementing a configuration management control, to determine the rigor of control, and to identify the mechanisms for imposing that control

Configuration of management accounting information system for multi-stage manufacturing

Science.gov (United States)

Mkrtychev, S. V.; Ochepovsky, A. V.; Enik, O. A.

2018-05-01

The article presents an approach to configuration of a management accounting information system (MAIS) that provides automated calculations and the registration of normative production losses in multi-stage manufacturing. The use of MAIS with the proposed configuration at the enterprises of textile and woodworking industries made it possible to increase the accuracy of calculations for normative production losses and to organize accounting thereof with the reference to individual stages of the technological process. Thus, high efficiency of multi-stage manufacturing control is achieved.

The Automatic Parallelisation of Scientific Application Codes Using a Computer Aided Parallelisation Toolkit

Science.gov (United States)

Ierotheou, C.; Johnson, S.; Leggett, P.; Cross, M.; Evans, E.; Jin, Hao-Qiang; Frumkin, M.; Yan, J.; Biegel, Bryan (Technical Monitor)

2001-01-01

The shared-memory programming model is a very effective way to achieve parallelism on shared memory parallel computers. Historically, the lack of a programming standard for using directives and the rather limited performance due to scalability have affected the take-up of this programming model approach. Significant progress has been made in hardware and software technologies, as a result the performance of parallel programs with compiler directives has also made improvements. The introduction of an industrial standard for shared-memory programming with directives, OpenMP, has also addressed the issue of portability. In this study, we have extended the computer aided parallelization toolkit (developed at the University of Greenwich), to automatically generate OpenMP based parallel programs with nominal user assistance. We outline the way in which loop types are categorized and how efficient OpenMP directives can be defined and placed using the in-depth interprocedural analysis that is carried out by the toolkit. We also discuss the application of the toolkit on the NAS Parallel Benchmarks and a number of real-world application codes. This work not only demonstrates the great potential of using the toolkit to quickly parallelize serial programs but also the good performance achievable on up to 300 processors for hybrid message passing and directive-based parallelizations.

Risk-based configuration control

International Nuclear Information System (INIS)

Szikszai, T.

1997-01-01

The presentation discusses the following issues: The Configuration Control; The Risk-based Configuration Control (during power operation mode, and during shutdown mode). PSA requirements. Use of Risk-based Configuration Control System. Configuration Management (basic elements, benefits, information requirements)

Thermoelectric System in Different Thermal and Electrical Configurations: Its Impact in the Figure of Merit

Directory of Open Access Journals (Sweden)

Alexander Vargas-Almeida

2013-05-01

Full Text Available In this work, we analyze different configurations of a thermoelectric system (TES composed of three thermoelectric generators (TEGs. We present the following considerations: (a TES thermally and electrically connected in series (SC; (b TES thermally and electrically connected in parallel (PSC; and (c parallel thermally and series electrical connection (SSC. We assume that the parameters of the TEGs are temperature-independent. The systems are characterized by three parameters, as it has been showed in recent investigations, namely, its internal electrical resistance, R, thermal conductance under open electrical circuit condition, K, and Seebeck coefficient α. We derive the equivalent parameters for each of the configurations considered here and calculate the Figure of Merit Z for the equivalent system. We show the impact of the configuration of the system on Z, and we suggest optimum configuration. In order to justify the effectiveness of the equivalent Figure of Merit, the corresponding efficiency has been calculated for each configuration.

A Genetic Toolkit for Dissecting Dopamine Circuit Function in Drosophila

Directory of Open Access Journals (Sweden)

Tingting Xie

2018-04-01

Full Text Available Summary: The neuromodulator dopamine (DA plays a key role in motor control, motivated behaviors, and higher-order cognitive processes. Dissecting how these DA neural networks tune the activity of local neural circuits to regulate behavior requires tools for manipulating small groups of DA neurons. To address this need, we assembled a genetic toolkit that allows for an exquisite level of control over the DA neural network in Drosophila. To further refine targeting of specific DA neurons, we also created reagents that allow for the conversion of any existing GAL4 line into Split GAL4 or GAL80 lines. We demonstrated how this toolkit can be used with recently developed computational methods to rapidly generate additional reagents for manipulating small subsets or individual DA neurons. Finally, we used the toolkit to reveal a dynamic interaction between a small subset of DA neurons and rearing conditions in a social space behavioral assay. : The rapid analysis of how dopaminergic circuits regulate behavior is limited by the genetic tools available to target and manipulate small numbers of these neurons. Xie et al. present genetic tools in Drosophila that allow rational targeting of sparse dopaminergic neuronal subsets and selective knockdown of dopamine signaling. Keywords: dopamine, genetics, behavior, neural circuits, neuromodulation, Drosophila

X-CSIT: a toolkit for simulating 2D pixel detectors

Science.gov (United States)

Joy, A.; Wing, M.; Hauf, S.; Kuster, M.; Rüter, T.

2015-04-01

A new, modular toolkit for creating simulations of 2D X-ray pixel detectors, X-CSIT (X-ray Camera SImulation Toolkit), is being developed. The toolkit uses three sequential simulations of detector processes which model photon interactions, electron charge cloud spreading with a high charge density plasma model and common electronic components used in detector readout. In addition, because of the wide variety in pixel detector design, X-CSIT has been designed as a modular platform so that existing functions can be modified or additional functionality added if the specific design of a detector demands it. X-CSIT will be used to create simulations of the detectors at the European XFEL, including three bespoke 2D detectors: the Adaptive Gain Integrating Pixel Detector (AGIPD), Large Pixel Detector (LPD) and DePFET Sensor with Signal Compression (DSSC). These simulations will be used by the detector group at the European XFEL for detector characterisation and calibration. For this purpose, X-CSIT has been integrated into the European XFEL's software framework, Karabo. This will further make it available to users to aid with the planning of experiments and analysis of data. In addition, X-CSIT will be released as a standalone, open source version for other users, collaborations and groups intending to create simulations of their own detectors.

Local Safety Toolkit: Enabling safe communities of opportunity

CSIR Research Space (South Africa)

Holtmann, B

2010-08-31

Full Text Available remain inadequate to achieve safety. The Local Safety Toolkit supports a strategy for a Safe South Africa through the implementation of a model for a Safe Community of Opportunity. The model is the outcome of work undertaken over the course of the past...

Application of Product Configuration Systems in Engineering Companies

DEFF Research Database (Denmark)

Kristjansdottir, Katrin

Engineering companies increasingly face the challenge of delivering highly customized products where time, cost, and quality are critical factors. To provide customized products efficiently, a product configuration system (PCS) is commonly implemented. A PCS supports the product configuration...... process, which consists of activities that involve gathering requirements from customers and generating the required product-related specifications. The application of a PCS in the industry has revealed benefits that include shorter lead-times, improved quality of specifications and products, and lower...... overall cost of the product. However, many PCS projects do encounter failure. With an increased focus on customized and personalized products, there is a growing need for the automation of business processes. For this reason, a PCS is becoming an essential part of IT strategy in different industries...

Conceptual Modelling for Product Configuration Systems

DEFF Research Database (Denmark)

Shafiee, Sara

Individual customization of goods and processes in different industries leads to complexity due to a growing mix of products both regarding characteristics of products and support services. In order to eliminate complexity and challenges in product/process customizing, smart IT systems called...... Product Configuration Systems (PCS), have been proposed as the solution both by researchers and practitioners and various benefits are mentioned from utilizing PCSs. Based on the latest literature, there are challenges reported in all phases of PCS projects including planning, development......, and documentation. Moreover, the challenges become more serious when it involves complicated products/processes in engineer-to-order (ETO) companies. The purpose of this thesis is to contribute to the existing knowledge of managing PCS projects by proposing frameworks and tools to address some of the main...

An open-source LabVIEW application toolkit for phasic heart rate analysis in psychophysiological research.

Science.gov (United States)

Duley, Aaron R; Janelle, Christopher M; Coombes, Stephen A

2004-11-01

The cardiovascular system has been extensively measured in a variety of research and clinical domains. Despite technological and methodological advances in cardiovascular science, the analysis and evaluation of phasic changes in heart rate persists as a way to assess numerous psychological concomitants. Some researchers, however, have pointed to constraints on data analysis when evaluating cardiac activity indexed by heart rate or heart period. Thus, an off-line application toolkit for heart rate analysis is presented. The program, written with National Instruments' LabVIEW, incorporates a variety of tools for off-line extraction and analysis of heart rate data. Current methods and issues concerning heart rate analysis are highlighted, and how the toolkit provides a flexible environment to ameliorate common problems that typically lead to trial rejection is discussed. Source code for this program may be downloaded from the Psychonomic Society Web archive at www.psychonomic.org/archive/.

The connectome viewer toolkit: an open source framework to manage, analyze, and visualize connectomes.

Science.gov (United States)

Gerhard, Stephan; Daducci, Alessandro; Lemkaddem, Alia; Meuli, Reto; Thiran, Jean-Philippe; Hagmann, Patric

2011-01-01

Advanced neuroinformatics tools are required for methods of connectome mapping, analysis, and visualization. The inherent multi-modality of connectome datasets poses new challenges for data organization, integration, and sharing. We have designed and implemented the Connectome Viewer Toolkit - a set of free and extensible open source neuroimaging tools written in Python. The key components of the toolkit are as follows: (1) The Connectome File Format is an XML-based container format to standardize multi-modal data integration and structured metadata annotation. (2) The Connectome File Format Library enables management and sharing of connectome files. (3) The Connectome Viewer is an integrated research and development environment for visualization and analysis of multi-modal connectome data. The Connectome Viewer's plugin architecture supports extensions with network analysis packages and an interactive scripting shell, to enable easy development and community contributions. Integration with tools from the scientific Python community allows the leveraging of numerous existing libraries for powerful connectome data mining, exploration, and comparison. We demonstrate the applicability of the Connectome Viewer Toolkit using Diffusion MRI datasets processed by the Connectome Mapper. The Connectome Viewer Toolkit is available from http://www.cmtk.org/

The Connectome Viewer Toolkit: an open source framework to manage, analyze and visualize connectomes

Directory of Open Access Journals (Sweden)

Stephan eGerhard

2011-06-01

Full Text Available Abstract Advanced neuroinformatics tools are required for methods of connectome mapping, analysis and visualization. The inherent multi-modality of connectome datasets poses new challenges for data organization, integration and sharing. We have designed and implemented the Connectome Viewer Toolkit --- a set of free and extensible open-source neuroimaging tools written in Python. The key components of the toolkit are as follows: 1. The Connectome File Format is an XML-based container format to standardize multi-modal data integration and structured metadata annotation. 2. The Connectome File Format Library enables management and sharing of connectome files. 3. The Connectome Viewer is an integrated research and development environment for visualization and analysis of multi-modal connectome data. The Connectome Viewer's plugin architecture supports extensions with network analysis packages and an interactive scripting shell, to enable easy development and community contributions. Integration with tools from the scientific Python community allows the leveraging of numerous existing libraries for powerful connectome data mining, exploration and comparison. We demonstrate the applicability of the Connectome Viewer Toolkit using Diffusion MRI datasets processed by the Connectome Mapper. The Connectome Viewer Toolkit is available from http://www.cmtk.org/.

Evaluation of the effects of break nozzle configuration in the Semiscale Mod-1 system

International Nuclear Information System (INIS)

Hanson, R.G.

1977-08-01

The Semiscale Mod-1 Program has utilized two different break nozzle configurations in the test system. An evaluation has been made to determine the effect these break nozzle configurations have on system thermal-hydraulic response during a 200 percent double-ended cold leg break loss-of-coolant accident simulation. The first nozzle was a convergent-divergent nozzle (Henry nozzle) and the second, an elongated constant area throat nozzle. Analysis is confined primarily to system response phenomena observed to be affected by the nozzle configuration and concentrates on the fluid response at the break and the resulting core behavior during subcooled and saturated blowdown. The evaluation shows that considerable difference in system response occurs as a result of the difference in break nozzle configuration. The elongated throat nozzle was scaled from the Loss-of-Fluid Test (LOFT) nozzle geometry and since the LOFT counterpart tests were designed to provide results for the LOFT Program, the elongated throat nozzle was used in the subsequent LOFT counterpart tests

Effects of a Short Video-Based Resident-as-Teacher Training Toolkit on Resident Teaching.

Science.gov (United States)

Ricciotti, Hope A; Freret, Taylor S; Aluko, Ashley; McKeon, Bri Anne; Haviland, Miriam J; Newman, Lori R

2017-10-01

To pilot a short video-based resident-as-teacher training toolkit and assess its effect on resident teaching skills in clinical settings. A video-based resident-as-teacher training toolkit was previously developed by educational experts at Beth Israel Deaconess Medical Center, Harvard Medical School. Residents were recruited from two academic hospitals, watched two videos from the toolkit ("Clinical Teaching Skills" and "Effective Clinical Supervision"), and completed an accompanying self-study guide. A novel assessment instrument for evaluating the effect of the toolkit on teaching was created through a modified Delphi process. Before and after the intervention, residents were observed leading a clinical teaching encounter and scored using the 15-item assessment instrument. The primary outcome of interest was the change in number of skills exhibited, which was assessed using the Wilcoxon signed-rank test. Twenty-eight residents from two academic hospitals were enrolled, and 20 (71%) completed all phases of the study. More than one third of residents who volunteered to participate reported no prior formal teacher training. After completing two training modules, residents demonstrated a significant increase in the median number of teaching skills exhibited in a clinical teaching encounter, from 7.5 (interquartile range 6.5-9.5) to 10.0 (interquartile range 9.0-11.5; P<.001). Of the 15 teaching skills assessed, there were significant improvements in asking for the learner's perspective (P=.01), providing feedback (P=.005), and encouraging questions (P=.046). Using a resident-as-teacher video-based toolkit was associated with improvements in teaching skills in residents from multiple specialties.

Educator Toolkits on Second Victim Syndrome, Mindfulness and Meditation, and Positive Psychology: The 2017 Resident Wellness Consensus Summit

Directory of Open Access Journals (Sweden)

Jon Smart

2018-02-01

Full Text Available Introduction: Burnout, depression, and suicidality among residents of all specialties have become a critical focus of attention for the medical education community. Methods: As part of the 2017 Resident Wellness Consensus Summit in Las Vegas, Nevada, resident participants from 31 programs collaborated in the Educator Toolkit workgroup. Over a seven-month period leading up to the summit, this workgroup convened virtually in the Wellness Think Tank, an online resident community, to perform a literature review and draft curricular plans on three core wellness topics. These topics were second victim syndrome, mindfulness and meditation, and positive psychology. At the live summit event, the workgroup expanded to include residents outside the Wellness Think Tank to obtain a broader consensus of the evidence-based toolkits for these three topics. Results: Three educator toolkits were developed. The second victim syndrome toolkit has four modules, each with a pre-reading material and a leader (educator guide. In the mindfulness and meditation toolkit, there are three modules with a leader guide in addition to a longitudinal, guided meditation plan. The positive psychology toolkit has two modules, each with a leader guide and a PowerPoint slide set. These toolkits provide educators the necessary resources, reading materials, and lesson plans to implement didactic sessions in their residency curriculum. Conclusion: Residents from across the world collaborated and convened to reach a consensus on high-yield—and potentially high-impact—lesson plans that programs can use to promote and improve resident wellness. These lesson plans may stand alone or be incorporated into a larger wellness curriculum.

Educator Toolkits on Second Victim Syndrome, Mindfulness and Meditation, and Positive Psychology: The 2017 Resident Wellness Consensus Summit.

Science.gov (United States)

Chung, Arlene S; Smart, Jon; Zdradzinski, Michael; Roth, Sarah; Gende, Alecia; Conroy, Kylie; Battaglioli, Nicole

2018-03-01

Burnout, depression, and suicidality among residents of all specialties have become a critical focus of attention for the medical education community. As part of the 2017 Resident Wellness Consensus Summit in Las Vegas, Nevada, resident participants from 31 programs collaborated in the Educator Toolkit workgroup. Over a seven-month period leading up to the summit, this workgroup convened virtually in the Wellness Think Tank, an online resident community, to perform a literature review and draft curricular plans on three core wellness topics. These topics were second victim syndrome, mindfulness and meditation, and positive psychology. At the live summit event, the workgroup expanded to include residents outside the Wellness Think Tank to obtain a broader consensus of the evidence-based toolkits for these three topics. Three educator toolkits were developed. The second victim syndrome toolkit has four modules, each with a pre-reading material and a leader (educator) guide. In the mindfulness and meditation toolkit, there are three modules with a leader guide in addition to a longitudinal, guided meditation plan. The positive psychology toolkit has two modules, each with a leader guide and a PowerPoint slide set. These toolkits provide educators the necessary resources, reading materials, and lesson plans to implement didactic sessions in their residency curriculum. Residents from across the world collaborated and convened to reach a consensus on high-yield-and potentially high-impact-lesson plans that programs can use to promote and improve resident wellness. These lesson plans may stand alone or be incorporated into a larger wellness curriculum.

ProtoMD: A prototyping toolkit for multiscale molecular dynamics

Science.gov (United States)

Somogyi, Endre; Mansour, Andrew Abi; Ortoleva, Peter J.

2016-05-01

ProtoMD is a toolkit that facilitates the development of algorithms for multiscale molecular dynamics (MD) simulations. It is designed for multiscale methods which capture the dynamic transfer of information across multiple spatial scales, such as the atomic to the mesoscopic scale, via coevolving microscopic and coarse-grained (CG) variables. ProtoMD can be also be used to calibrate parameters needed in traditional CG-MD methods. The toolkit integrates 'GROMACS wrapper' to initiate MD simulations, and 'MDAnalysis' to analyze and manipulate trajectory files. It facilitates experimentation with a spectrum of coarse-grained variables, prototyping rare events (such as chemical reactions), or simulating nanocharacterization experiments such as terahertz spectroscopy, AFM, nanopore, and time-of-flight mass spectroscopy. ProtoMD is written in python and is freely available under the GNU General Public License from github.com/CTCNano/proto_md.

Correlation as a Determinant of Configurational Entropy in Supramolecular and Protein Systems

Science.gov (United States)

2015-01-01

For biomolecules in solution, changes in configurational entropy are thought to contribute substantially to the free energies of processes like binding and conformational change. In principle, the configurational entropy can be strongly affected by pairwise and higher-order correlations among conformational degrees of freedom. However, the literature offers mixed perspectives regarding the contributions that changes in correlations make to changes in configurational entropy for such processes. Here we take advantage of powerful techniques for simulation and entropy analysis to carry out rigorous in silico studies of correlation in binding and conformational changes. In particular, we apply information-theoretic expansions of the configurational entropy to well-sampled molecular dynamics simulations of a model host–guest system and the protein bovine pancreatic trypsin inhibitor. The results bear on the interpretation of NMR data, as they indicate that changes in correlation are important determinants of entropy changes for biologically relevant processes and that changes in correlation may either balance or reinforce changes in first-order entropy. The results also highlight the importance of main-chain torsions as contributors to changes in protein configurational entropy. As simulation techniques grow in power, the mathematical techniques used here will offer new opportunities to answer challenging questions about complex molecular systems. PMID:24702693

SlideToolkit: an assistive toolset for the histological quantification of whole slide images.

Directory of Open Access Journals (Sweden)

Bastiaan G L Nelissen

Full Text Available The demand for accurate and reproducible phenotyping of a disease trait increases with the rising number of biobanks and genome wide association studies. Detailed analysis of histology is a powerful way of phenotyping human tissues. Nonetheless, purely visual assessment of histological slides is time-consuming and liable to sampling variation and optical illusions and thereby observer variation, and external validation may be cumbersome. Therefore, within our own biobank, computerized quantification of digitized histological slides is often preferred as a more precise and reproducible, and sometimes more sensitive approach. Relatively few free toolkits are, however, available for fully digitized microscopic slides, usually known as whole slides images. In order to comply with this need, we developed the slideToolkit as a fast method to handle large quantities of low contrast whole slides images using advanced cell detecting algorithms. The slideToolkit has been developed for modern personal computers and high-performance clusters (HPCs and is available as an open-source project on github.com. We here illustrate the power of slideToolkit by a repeated measurement of 303 digital slides containing CD3 stained (DAB abdominal aortic aneurysm tissue from a tissue biobank. Our workflow consists of four consecutive steps. In the first step (acquisition, whole slide images are collected and converted to TIFF files. In the second step (preparation, files are organized. The third step (tiles, creates multiple manageable tiles to count. In the fourth step (analysis, tissue is analyzed and results are stored in a data set. Using this method, two consecutive measurements of 303 slides showed an intraclass correlation of 0.99. In conclusion, slideToolkit provides a free, powerful and versatile collection of tools for automated feature analysis of whole slide images to create reproducible and meaningful phenotypic data sets.

Using Low-Level Architectural Features for Configuration InfoSec in a General-Purpose Self-Configurable System

OpenAIRE

Nicholas J. Macias; Peter M. Athanas

2009-01-01

Unique characteristics of biological systems are described, and similarities are made to certain computing architectures. The security challenges posed by these characteristics are discussed. A method of securely isolating portions of a design using introspective capabilities of a fine-grain self-configurable device is presented. Experimental results are discussed, and plans for future work are given.

A Single Tower Configuration of the Modular Gamma Box Counter System - 13392

Energy Technology Data Exchange (ETDEWEB)

Morris, K.; Nakazawa, D.; Francalangia, J.; Gonzalez, H. [Canberra Industries Inc., 800 Research Parkway, Meriden, CT, 06450 (United States)

2013-07-01

Canberra's Standard Gamma Box Counter System is designed to perform accurate quantitative assays of gamma emitting nuclides for a wide range of large containers including B-25 crates and ISO shipping containers. Using a modular building-block approach, the system offers tremendous flexibility for a variety of measurement situations with wide ranges of sample activities and throughput requirements, as well as the opportunity to modify the configuration for other applications at a later date. The typical configuration consists of two opposing towers each equipped with two high purity germanium detectors, and an automated container trolley. This paper presents a modified configuration, consisting of a single tower placed inside a measurement trailer with three detector assemblies, allowing for additional vertical segmentation as well as a viewing a container outside the trailer through the trailer wall. An automatic liquid nitrogen fill system is supplied for each of the detectors. The use of a forklift to move the container for horizontal segmentation is accommodated by creating an additional operational and calibration set-up in the NDA 2000 software to allow for the operator to rotate the container and assay the opposite side, achieving the same sensitivity as a comparable two-tower system. This Segmented Gamma Box Counter System retains the core technologies and design features of the standard configuration. The detector assemblies are shielded to minimize interference from environmental and plant background, and are collimated to provide segmentation of the container. The assembly positions can also be modified in height and distance from the container. The ISOCS calibration software provides for a flexible approach to providing the calibrations for a variety of measurement geometries. The NDA 2000 software provides seamless operation with the current configuration, handling the data acquisition and analysis. In this paper, an overview of this system is

Systems configured to distribute a telephone call, communication systems, communication methods and methods of routing a telephone call to a service representative

Science.gov (United States)

Harris, Scott H.; Johnson, Joel A.; Neiswanger, Jeffery R.; Twitchell, Kevin E.

2004-03-09

The present invention includes systems configured to distribute a telephone call, communication systems, communication methods and methods of routing a telephone call to a customer service representative. In one embodiment of the invention, a system configured to distribute a telephone call within a network includes a distributor adapted to connect with a telephone system, the distributor being configured to connect a telephone call using the telephone system and output the telephone call and associated data of the telephone call; and a plurality of customer service representative terminals connected with the distributor and a selected customer service representative terminal being configured to receive the telephone call and the associated data, the distributor and the selected customer service representative terminal being configured to synchronize, application of the telephone call and associated data from the distributor to the selected customer service representative terminal.

A multi-perspective approach for the design of Product Configuration Systems - an evaluation of industry applications

DEFF Research Database (Denmark)

Hvam, Lars

2004-01-01

, a de-marcation and definition of the configuration system to be designed. • Analysis and modelling of the part of the company’s product assortment which is to be included in the con-figuration system. • Selection of configuration software and programming of the configuration system. • Implementation....... The procedure or certain parts of the procedure have currently been tested and further developed in cooperation with a number of industrial companies including F.L.Smidth, American Power Conversion (APC), Aalborg industries, NEG-Micon, GEA-Niro and IBM-SMS. This paper presents the experiences gained from 4...

Reliability Equivalence to Symmetrical UHVDC Transmission Systems Considering Redundant Structure Configuration

Directory of Open Access Journals (Sweden)

Xing Jiang

2018-03-01

Full Text Available In recent years, the ultra-high voltage direct current (UHVDC transmission system has been developed rapidly for its significant long-distance, high-capacity and low-loss properties. Equipment failures and overall outages of the UHVDC system have increasingly vital influence on the power supply of the receiving end grid. To improve the reliability level of UHVDC systems, a quantitative selection and configuration approach of redundant structures is proposed in this paper, which is based on multi-state reliability equivalence. Specifically, considering the symmetry characteristic of an UHVDC system, a state space model is established as a monopole rather than a bipole, which effectively reduces the state space dimensions to be considered by deducing the reliability merging operator of two poles. Considering the standby effect of AC filters and the recovery effect of converter units, the number of available converter units and corresponding probability are expressed with in universal generating function (UGF form. Then, a sensitivity analysis is performed to quantify the impact of component reliability parameters on system reliability and determine the most specific devices that should be configured in the redundant structure. Finally, a cost-benefit analysis is utilized to help determine the optimal scheme of redundant devices. Case studies are conducted to demonstrate the effectiveness and accuracy of the proposed method. Based on the numerical results, configuring a set of redundant transformers is indicated to be of the greatest significance to improve the reliability level of UHVDC transmission systems.

Security Assessment Simulation Toolkit (SAST) Final Report

Energy Technology Data Exchange (ETDEWEB)

Meitzler, Wayne D.; Ouderkirk, Steven J.; Hughes, Chad O.

2009-11-15

The Department of Defense Technical Support Working Group (DoD TSWG) investment in the Pacific Northwest National Laboratory (PNNL) Security Assessment Simulation Toolkit (SAST) research planted a technology seed that germinated into a suite of follow-on Research and Development (R&D) projects culminating in software that is used by multiple DoD organizations. The DoD TSWG technology transfer goal for SAST is already in progress. The Defense Information Systems Agency (DISA), the Defense-wide Information Assurance Program (DIAP), the Marine Corps, Office Of Naval Research (ONR) National Center For Advanced Secure Systems Research (NCASSR) and Office Of Secretary Of Defense International Exercise Program (OSD NII) are currently investing to take SAST to the next level. PNNL currently distributes the software to over 6 government organizations and 30 DoD users. For the past five DoD wide Bulwark Defender exercises, the adoption of this new technology created an expanding role for SAST. In 2009, SAST was also used in the OSD NII International Exercise and is currently scheduled for use in 2010.

Graph algorithms in the titan toolkit.

Energy Technology Data Exchange (ETDEWEB)

McLendon, William Clarence, III; Wylie, Brian Neil

2009-10-01

Graph algorithms are a key component in a wide variety of intelligence analysis activities. The Graph-Based Informatics for Non-Proliferation and Counter-Terrorism project addresses the critical need of making these graph algorithms accessible to Sandia analysts in a manner that is both intuitive and effective. Specifically we describe the design and implementation of an open source toolkit for doing graph analysis, informatics, and visualization that provides Sandia with novel analysis capability for non-proliferation and counter-terrorism.

EasyInterface: A toolkit for rapid development of GUIs for research prototype tools

OpenAIRE

Doménech, Jesús; Genaim, Samir; Johnsen, Einar Broch; Schlatte, Rudolf

2017-01-01

In this paper we describe EasyInterface, an open-source toolkit for rapid development of web-based graphical user interfaces (GUIs). This toolkit addresses the need of researchers to make their research prototype tools available to the community, and integrating them in a common environment, rapidly and without being familiar with web programming or GUI libraries in general. If a tool can be executed from a command-line and its output goes to the standard output, then in few minutes one can m...

Central configurations, periodic orbits, and Hamiltonian systems

CERN Document Server

Llibre, Jaume; Simó, Carles

2015-01-01

The notes of this book originate from three series of lectures given at the Centre de Recerca Matemàtica (CRM) in Barcelona. The first one is dedicated to the study of periodic solutions of autonomous differential systems in Rn via the Averaging Theory and was delivered by Jaume Llibre. The second one, given by Richard Moeckel, focusses on methods for studying Central Configurations. The last one, by Carles Simó, describes the main mechanisms leading to a fairly global description of the dynamics in conservative systems. The book is directed towards graduate students and researchers interested in dynamical systems, in particular in the conservative case, and aims at facilitating the understanding of dynamics of specific models. The results presented and the tools introduced in this book include a large range of applications.

Solutions on high-resolution multiple configuration system sensors

Science.gov (United States)

Liu, Hua; Ding, Quanxin; Guo, Chunjie; Zhou, Liwei

2014-11-01

For aim to achieve an improved resolution in modern image domain, a method of continuous zoom multiple configuration, with a core optics is attempt to establish model by novel principle on energy transfer and high accuracy localization, by which the system resolution can be improved with a level in nano meters. A comparative study on traditional vs modern methods can demonstrate that the dialectical relationship and their balance is important, among Merit function, Optimization algorithms and Model parameterization. The effect of system evaluated criterion that MTF, REA, RMS etc. can support our arguments qualitatively.

Knowledge Based Product Configuration - a documentatio tool for configuration projects

DEFF Research Database (Denmark)

Hvam, Lars; Malis, Martin

2003-01-01

. A lot of knowledge isput into these systems and many domain experts are involved. This calls for an effective documentation system in order to structure this knowledge in a way that fits to the systems. Standard configuration systems do not support this kind of documentation. The chapter deals...... with the development of a Lotus Notes application that serves as a knowledge based documentation tool for configuration projects. A prototype has been developed and tested empirically in an industrial case-company. It has proved to be a succes....

Data base management system configuration specification. [computer storage devices

Science.gov (United States)

Neiers, J. W.

1979-01-01

The functional requirements and the configuration of the data base management system are described. Techniques and technology which will enable more efficient and timely transfer of useful data from the sensor to the user, extraction of information by the user, and exchange of information among the users are demonstrated.

Practical Consideration Factors to Design Array Configuration of Direction Finding System for Airborne Signal Intelligence

Directory of Open Access Journals (Sweden)

Jong-Hwan Lee

2018-01-01

Full Text Available Airborne signal intelligence (SIGINT systems must be capable of locating radio signal sources. Direction finding (DF to support this capability is an important factor. There are some practical considerations to be taken when designing the array configuration of a DF system for airborne SIGINT systems. This paper summarizes the practical factors when designing the array configuration of the DF system for airborne SIGINT. In particular, it focuses on four areas: antenna consideration factors when installing the DF system for airborne SIGINT from a practical point of view, array configuration methods for airborne communications intelligence and electronic intelligence, and a numerical analysis to select the optimum antenna position for airborne SIGINT.

A flexible open-source toolkit for lava flow simulations

Science.gov (United States)

Mossoux, Sophie; Feltz, Adelin; Poppe, Sam; Canters, Frank; Kervyn, Matthieu

2014-05-01

Lava flow hazard modeling is a useful tool for scientists and stakeholders confronted with imminent or long term hazard from basaltic volcanoes. It can improve their understanding of the spatial distribution of volcanic hazard, influence their land use decisions and improve the city evacuation during a volcanic crisis. Although a range of empirical, stochastic and physically-based lava flow models exists, these models are rarely available or require a large amount of physical constraints. We present a GIS toolkit which models lava flow propagation from one or multiple eruptive vents, defined interactively on a Digital Elevation Model (DEM). It combines existing probabilistic (VORIS) and deterministic (FLOWGO) models in order to improve the simulation of lava flow spatial spread and terminal length. Not only is this toolkit open-source, running in Python, which allows users to adapt the code to their needs, but it also allows users to combine the models included in different ways. The lava flow paths are determined based on the probabilistic steepest slope (VORIS model - Felpeto et al., 2001) which can be constrained in order to favour concentrated or dispersed flow fields. Moreover, the toolkit allows including a corrective factor in order for the lava to overcome small topographical obstacles or pits. The lava flow terminal length can be constrained using a fixed length value, a Gaussian probability density function or can be calculated based on the thermo-rheological properties of the open-channel lava flow (FLOWGO model - Harris and Rowland, 2001). These slope-constrained properties allow estimating the velocity of the flow and its heat losses. The lava flow stops when its velocity is zero or the lava temperature reaches the solidus. Recent lava flows of Karthala volcano (Comoros islands) are here used to demonstrate the quality of lava flow simulations with the toolkit, using a quantitative assessment of the match of the simulation with the real lava flows. The

The SpeX Prism Library Analysis Toolkit: Design Considerations and First Results

Science.gov (United States)

Burgasser, Adam J.; Aganze, Christian; Escala, Ivana; Lopez, Mike; Choban, Caleb; Jin, Yuhui; Iyer, Aishwarya; Tallis, Melisa; Suarez, Adrian; Sahi, Maitrayee

2016-01-01

Various observational and theoretical spectral libraries now exist for galaxies, stars, planets and other objects, which have proven useful for classification, interpretation, simulation and model development. Effective use of these libraries relies on analysis tools, which are often left to users to develop. In this poster, we describe a program to develop a combined spectral data repository and Python-based analysis toolkit for low-resolution spectra of very low mass dwarfs (late M, L and T dwarfs), which enables visualization, spectral index analysis, classification, atmosphere model comparison, and binary modeling for nearly 2000 library spectra and user-submitted data. The SpeX Prism Library Analysis Toolkit (SPLAT) is being constructed as a collaborative, student-centered, learning-through-research model with high school, undergraduate and graduate students and regional science teachers, who populate the database and build the analysis tools through quarterly challenge exercises and summer research projects. In this poster, I describe the design considerations of the toolkit, its current status and development plan, and report the first published results led by undergraduate students. The combined data and analysis tools are ideal for characterizing cool stellar and exoplanetary atmospheres (including direct exoplanetary spectra observations by Gemini/GPI, VLT/SPHERE, and JWST), and the toolkit design can be readily adapted for other spectral datasets as well.This material is based upon work supported by the National Aeronautics and Space Administration under Grant No. NNX15AI75G. SPLAT code can be found at https://github.com/aburgasser/splat.

ICAROUS - Integrated Configurable Algorithms for Reliable Operations Of Unmanned Systems

Science.gov (United States)

Consiglio, María; Muñoz, César; Hagen, George; Narkawicz, Anthony; Balachandran, Swee

2016-01-01

NASA's Unmanned Aerial System (UAS) Traffic Management (UTM) project aims at enabling near-term, safe operations of small UAS vehicles in uncontrolled airspace, i.e., Class G airspace. A far-term goal of UTM research and development is to accommodate the expected rise in small UAS traffic density throughout the National Airspace System (NAS) at low altitudes for beyond visual line-of-sight operations. This paper describes a new capability referred to as ICAROUS (Integrated Configurable Algorithms for Reliable Operations of Unmanned Systems), which is being developed under the UTM project. ICAROUS is a software architecture comprised of highly assured algorithms for building safety-centric, autonomous, unmanned aircraft applications. Central to the development of the ICAROUS algorithms is the use of well-established formal methods to guarantee higher levels of safety assurance by monitoring and bounding the behavior of autonomous systems. The core autonomy-enabling capabilities in ICAROUS include constraint conformance monitoring and contingency control functions. ICAROUS also provides a highly configurable user interface that enables the modular integration of mission-specific software components.

Toolkit for healthcare facility design evaluation - some case studies

CSIR Research Space (South Africa)

De Jager, Peta

2007-10-01

Full Text Available themes in approach. Further study is indicated, but preliminary research shows that, whilst these toolkits can be applied to the South African context, there are compelling reasons for them to be adapted. This paper briefly outlines these three case...

Toolkit for healthcare facility design evaluation - some case studies.

CSIR Research Space (South Africa)

De Jager, Peta

2007-10-01

Full Text Available themes in approach. Further study is indicated, but preliminary research shows that, whilst these toolkits can be applied to the South African context, there are compelling reasons for them to be adapted. This paper briefly outlines these three case...

New Careers in Nursing Scholar Alumni Toolkit: Development of an Innovative Resource for Transition to Practice.

Science.gov (United States)

Mauro, Ann Marie P; Escallier, Lori A; Rosario-Sim, Maria G

2016-01-01

The transition from student to professional nurse is challenging and may be more difficult for underrepresented minority nurses. The Robert Wood Johnson Foundation New Careers in Nursing (NCIN) program supported development of a toolkit that would serve as a transition-to-practice resource to promote retention of NCIN alumni and other new nurses. Thirteen recent NCIN alumni (54% male, 23% Hispanic/Latino, 23% African Americans) from 3 schools gave preliminary content feedback. An e-mail survey was sent to a convenience sample of 29 recent NCIN alumni who evaluated the draft toolkit using a Likert scale (poor = 1; excellent = 5). Twenty NCIN alumni draft toolkit reviewers (response rate 69%) were primarily female (80%) and Hispanic/Latino (40%). Individual chapters' mean overall rating of 4.67 demonstrated strong validation. Mean scores for overall toolkit content (4.57), usability (4.5), relevance (4.79), and quality (4.71) were also excellent. Qualitative comments were analyzed using thematic content analysis and supported the toolkit's relevance and utility. A multilevel peer review process was also conducted. Peer reviewer feedback resulted in a 6-chapter document that offers resources for successful transition to practice and lays the groundwork for continued professional growth. Future research is needed to determine the ideal time to introduce this resource. Copyright © 2016 Elsevier Inc. All rights reserved.

RGtk2: A Graphical User Interface Toolkit for R

Directory of Open Access Journals (Sweden)

Duncan Temple Lang

2011-01-01

Full Text Available Graphical user interfaces (GUIs are growing in popularity as a complement or alternative to the traditional command line interfaces to R. RGtk2 is an R package for creating GUIs in R. The package provides programmatic access to GTK+ 2.0, an open-source GUI toolkit written in C. To construct a GUI, the R programmer calls RGtk2 functions that map to functions in the underlying GTK+ library. This paper introduces the basic concepts underlying GTK+ and explains how to use RGtk2 to construct GUIs from R. The tutorial is based on simple and pratical programming examples. We also provide more complex examples illustrating the advanced features of the package. The design of the RGtk2 API and the low-level interface from R to GTK+ are discussed at length. We compare RGtk2 to alternative GUI toolkits for R.

A methodological toolkit for field assessments of artisanally mined alluvial diamond deposits

Science.gov (United States)

Chirico, Peter G.; Malpeli, Katherine C.

2014-01-01

This toolkit provides a standardized checklist of critical issues relevant to artisanal mining-related field research. An integrated sociophysical geographic approach to collecting data at artisanal mine sites is outlined. The implementation and results of a multistakeholder approach to data collection, carried out in the assessment of Guinea’s artisanally mined diamond deposits, also are summarized. This toolkit, based on recent and successful field campaigns in West Africa, has been developed as a reference document to assist other government agencies or organizations in collecting the data necessary for artisanal diamond mining or similar natural resource assessments.

A configurable electronics system for the ESS-Bilbao beam position monitors

International Nuclear Information System (INIS)

Muguira, L.; Belver, D.; Etxebarria, V.; Varnasseri, S.; Arredondo, I.; Campo, M. del; Echevarria, P.; Garmendia, N.; Feuchtwanger, J.; Jugo, J.; Portilla, J.

2013-01-01

A versatile and configurable system has been developed in order to monitorize the beam position and to meet all the requirements of the future ESS-Bilbao Linac. At the same time the design has been conceived to be open and configurable so that it could eventually be used in different kinds of accelerators, independent of the charged particle, with minimal change. The design of the Beam Position Monitors (BPMs) system includes a test bench both for button-type pick-ups (PU) and striplines (SL), the electronic units and the control system. The electronic units consist of two main parts. The first part is an Analog Front-End (AFE) unit where the RF signals are filtered, conditioned and converted to base-band. The second part is a Digital Front-End (DFE) unit which is based on an FPGA board where the base-band signals are sampled in order to calculate the beam position, the amplitude and the phase. To manage the system a Multipurpose Controller (MC) developed at ESSB has been used. It includes the FPGA management, the EPICS integration and Archiver Instances. A description of the system and a comparison between the performance of both PU and SL BPM designs measured with this electronics system are fully described and discussed. -- Author-Highlights: • A versatile and configurable BPM system for the ESS-Bilbao Linac has been designed. • The design works for PU and SL detectors, both in continuous and pulsed wave modes. • Several tests at simulated beamlines at 352 MHz and 175 MHz have been performed. • The BPM system has been integrated in EPICS and Archiver

A configurable electronics system for the ESS-Bilbao beam position monitors

Energy Technology Data Exchange (ETDEWEB)

Muguira, L., E-mail: lmuguira@essbilbao.org [ESS-Bilbao, Edificio Rectorado, Vivero de Empresas, 48940 Leioa (Bizkaia) (Spain); Belver, D. [ESS-Bilbao, Edificio Rectorado, Vivero de Empresas, 48940 Leioa (Bizkaia) (Spain); Etxebarria, V. [University of Basque Country (UPV/EHU), Department of Electricity and Electronics, Science and Technology Faculty, 48940 Leioa (Bizkaia) (Spain); Varnasseri, S.; Arredondo, I.; Campo, M. del; Echevarria, P.; Garmendia, N.; Feuchtwanger, J. [ESS-Bilbao, Edificio Rectorado, Vivero de Empresas, 48940 Leioa (Bizkaia) (Spain); Jugo, J.; Portilla, J. [University of Basque Country (UPV/EHU), Department of Electricity and Electronics, Science and Technology Faculty, 48940 Leioa (Bizkaia) (Spain)

2013-09-01

A versatile and configurable system has been developed in order to monitorize the beam position and to meet all the requirements of the future ESS-Bilbao Linac. At the same time the design has been conceived to be open and configurable so that it could eventually be used in different kinds of accelerators, independent of the charged particle, with minimal change. The design of the Beam Position Monitors (BPMs) system includes a test bench both for button-type pick-ups (PU) and striplines (SL), the electronic units and the control system. The electronic units consist of two main parts. The first part is an Analog Front-End (AFE) unit where the RF signals are filtered, conditioned and converted to base-band. The second part is a Digital Front-End (DFE) unit which is based on an FPGA board where the base-band signals are sampled in order to calculate the beam position, the amplitude and the phase. To manage the system a Multipurpose Controller (MC) developed at ESSB has been used. It includes the FPGA management, the EPICS integration and Archiver Instances. A description of the system and a comparison between the performance of both PU and SL BPM designs measured with this electronics system are fully described and discussed. -- Author-Highlights: • A versatile and configurable BPM system for the ESS-Bilbao Linac has been designed. • The design works for PU and SL detectors, both in continuous and pulsed wave modes. • Several tests at simulated beamlines at 352 MHz and 175 MHz have been performed. • The BPM system has been integrated in EPICS and Archiver.

Penetration Tester's Open Source Toolkit

CERN Document Server

Faircloth, Jeremy

2011-01-01

Great commercial penetration testing tools can be very expensive and sometimes hard to use or of questionable accuracy. This book helps solve both of these problems. The open source, no-cost penetration testing tools presented do a great job and can be modified by the user for each situation. Many tools, even ones that cost thousands of dollars, do not come with any type of instruction on how and in which situations the penetration tester can best use them. Penetration Tester's Open Source Toolkit, Third Edition, expands upon existing instructions so that a professional can get the most accura

Google Web Toolkit for Ajax

CERN Document Server

Perry, Bruce

2007-01-01

The Google Web Toolkit (GWT) is a nifty framework that Java programmers can use to create Ajax applications. The GWT allows you to create an Ajax application in your favorite IDE, such as IntelliJ IDEA or Eclipse, using paradigms and mechanisms similar to programming a Java Swing application. After you code the application in Java, the GWT's tools generate the JavaScript code the application needs. You can also use typical Java project tools such as JUnit and Ant when creating GWT applications. The GWT is a free download, and you can freely distribute the client- and server-side code you c

The Exoplanet Characterization ToolKit (ExoCTK)

Science.gov (United States)

Stevenson, Kevin; Fowler, Julia; Lewis, Nikole K.; Fraine, Jonathan; Pueyo, Laurent; Valenti, Jeff; Bruno, Giovanni; Filippazzo, Joseph; Hill, Matthew; Batalha, Natasha E.; Bushra, Rafia

2018-01-01

The success of exoplanet characterization depends critically on a patchwork of analysis tools and spectroscopic libraries that currently require extensive development and lack a centralized support system. Due to the complexity of spectroscopic analyses and initial time commitment required to become productive, there are currently a limited number of teams that are actively advancing the field. New teams with significant expertise, but without the proper tools, face prohibitively steep hills to climb before they can contribute. As a solution, we are developing an open-source, modular data analysis package in Python and a publicly facing web interface focused primarily on atmospheric characterization of exoplanets and exoplanet transit observation planning with JWST. The foundation of these software tools and libraries exist within pockets of the exoplanet community. Our project will gather these seedling tools and grow a robust, uniform, and well maintained exoplanet characterization toolkit.

The Knowledge Translation Toolkit: Bridging the Know–Do Gap: A ...

International Development Research Centre (IDRC) Digital Library (Canada)

2011-06-06

Jun 6, 2011 ... It presents the theories, tools, and strategies required to encourage and enable ... Toolkit: Bridging the Know–Do Gap: A Resource for Researchers ... violence, and make digital platforms work for inclusive development.

Implementation of the Good School Toolkit in Uganda: a quantitative process evaluation of a successful violence prevention program.

Science.gov (United States)

Knight, Louise; Allen, Elizabeth; Mirembe, Angel; Nakuti, Janet; Namy, Sophie; Child, Jennifer C; Sturgess, Joanna; Kyegombe, Nambusi; Walakira, Eddy J; Elbourne, Diana; Naker, Dipak; Devries, Karen M

2018-05-09

The Good School Toolkit, a complex behavioural intervention designed by Raising Voices a Ugandan NGO, reduced past week physical violence from school staff to primary students by an average of 42% in a recent randomised controlled trial. This process evaluation quantitatively examines what was implemented across the twenty-one intervention schools, variations in school prevalence of violence after the intervention, factors that influence exposure to the intervention and factors associated with students' experience of physical violence from staff at study endline. Implementation measures were captured prospectively in the twenty-one intervention schools over four school terms from 2012 to 2014 and Toolkit exposure captured in the student (n = 1921) and staff (n = 286) endline cross-sectional surveys in 2014. Implementation measures and the prevalence of violence are summarised across schools and are assessed for correlation using Spearman's Rank Correlation Coefficient. Regression models are used to explore individual factors associated with Toolkit exposure and with physical violence at endline. School prevalence of past week physical violence from staff against students ranged from 7% to 65% across schools at endline. Schools with higher mean levels of teacher Toolkit exposure had larger decreases in violence during the study. Students in schools categorised as implementing a 'low' number of program school-led activities reported less exposure to the Toolkit. Higher student Toolkit exposure was associated with decreased odds of experiencing physical violence from staff (OR: 0.76, 95%CI: 0.67-0.86, p-valueEffectiveness of the Toolkit may be increased by further targeting and supporting teachers' engagement with girls and students with mental health difficulties. The trial is registered at clinicaltrials.gov , NCT01678846, August 24th 2012.

Patient-Centered Personal Health Record and Portal Implementation Toolkit for Ambulatory Clinics: A Feasibility Study.

Science.gov (United States)

Nahm, Eun-Shim; Diblasi, Catherine; Gonzales, Eva; Silver, Kristi; Zhu, Shijun; Sagherian, Knar; Kongs, Katherine

2017-04-01

Personal health records and patient portals have been shown to be effective in managing chronic illnesses. Despite recent nationwide implementation efforts, the personal health record and patient portal adoption rates among patients are low, and the lack of support for patients using the programs remains a critical gap in most implementation processes. In this study, we implemented the Patient-Centered Personal Health Record and Patient Portal Implementation Toolkit in a large diabetes/endocrinology center and assessed its preliminary impact on personal health record and patient portal knowledge, self-efficacy, patient-provider communication, and adherence to treatment plans. Patient-Centered Personal Health Record and Patient Portal Implementation Toolkit is composed of Patient-Centered Personal Health Record and Patient Portal Implementation Toolkit-General, clinic-level resources for clinicians, staff, and patients, and Patient-Centered Personal Health Record and Patient Portal Implementation Toolkit Plus, an optional 4-week online resource program for patients ("MyHealthPortal"). First, Patient-Centered Personal Health Record and Patient Portal Implementation Toolkit-General was implemented, and all clinicians and staff were educated about the center's personal health record and patient portal. Then general patient education was initiated, while a randomized controlled trial was conducted to test the preliminary effects of "MyHealthPortal" using a small sample (n = 74) with three observations (baseline and 4 and 12 weeks). The intervention group showed significantly greater improvement than the control group in patient-provider communication at 4 weeks (t56 = 3.00, P = .004). For other variables, the intervention group tended to show greater improvement; however, the differences were not significant. In this preliminary study, Patient-Centered Personal Health Record and Patient Portal Implementation Toolkit showed potential for filling the gap in the current

Design and Implementation of Cloud-Centric Configuration Repository for DIY IoT Applications.

Science.gov (United States)

Ahmad, Shabir; Hang, Lei; Kim, Do Hyeun

2018-02-06

The Do-It-Yourself (DIY) vision for the design of a smart and customizable IoT application demands the involvement of the general public in its development process. The general public lacks the technical knowledge for programming state-of-the-art prototyping and development kits. The latest IoT kits, for example, Raspberry Pi, are revolutionizing the DIY paradigm for IoT, and more than ever, a DIY intuitive programming interface is required to enable the masses to interact with and customize the behavior of remote IoT devices on the Internet. However, in most cases, these DIY toolkits store the resultant configuration data in local storage and, thus, cannot be accessed remotely. This paper presents the novel implementation of such a system, which not only enables the general public to customize the behavior of remote IoT devices through a visual interface, but also makes the configuration available everywhere and anytime by leveraging the power of cloud-based platforms. The interface enables the visualization of the resources exposed by remote embedded resources in the form of graphical virtual objects (VOs). These VOs are used to create the service design through simple operations like drag-and-drop and the setting of properties. The configuration created as a result is maintained as an XML document, which is ingested by the cloud platform, thus making it available to be used anywhere. We use the HTTP approach for the communication between the cloud and IoT toolbox and the cloud and real devices, but for communication between the toolbox and actual resources, CoAP is used. Finally, a smart home case study has been implemented and presented in order to assess the effectiveness of the proposed work.

Design and Implementation of Cloud-Centric Configuration Repository for DIY IoT Applications

Directory of Open Access Journals (Sweden)

Shabir Ahmad

2018-02-01

Full Text Available The Do-It-Yourself (DIY vision for the design of a smart and customizable IoT application demands the involvement of the general public in its development process. The general public lacks the technical knowledge for programming state-of-the-art prototyping and development kits. The latest IoT kits, for example, Raspberry Pi, are revolutionizing the DIY paradigm for IoT, and more than ever, a DIY intuitive programming interface is required to enable the masses to interact with and customize the behavior of remote IoT devices on the Internet. However, in most cases, these DIY toolkits store the resultant configuration data in local storage and, thus, cannot be accessed remotely. This paper presents the novel implementation of such a system, which not only enables the general public to customize the behavior of remote IoT devices through a visual interface, but also makes the configuration available everywhere and anytime by leveraging the power of cloud-based platforms. The interface enables the visualization of the resources exposed by remote embedded resources in the form of graphical virtual objects (VOs. These VOs are used to create the service design through simple operations like drag-and-drop and the setting of properties. The configuration created as a result is maintained as an XML document, which is ingested by the cloud platform, thus making it available to be used anywhere. We use the HTTP approach for the communication between the cloud and IoT toolbox and the cloud and real devices, but for communication between the toolbox and actual resources, CoAP is used. Finally, a smart home case study has been implemented and presented in order to assess the effectiveness of the proposed work.

Hybrid Configuration of Darrieus and Savonius Rotors for Stand-alone Power Systems

Science.gov (United States)

Wakui, Tetsuya; Tanzawa, Yoshiaki; Hashizume, Takumi; Nagao, Toshio

The suitable hybrid configuration of Darrieus lift-type and Savonius drag-type rotors for stand-alone wind turbine-generator systems is discussed using our dynamic simulation model. Two types of hybrid configurations are taken up: Type-A installs the Savonius rotor inside the Darrieus rotor and Type-B installs the Savonius rotor outside the Darrieus rotor. The computed results of the output characteristics and the dynamic behaviors of the system operated at the maximum power coefficient points show that Type-A, which has fine operating behavior to wind speed changes and can be compactly designed because of a shorter rotational shaft, is an effective way for self-controlled stand-alone small-scale systems.

Comparison between four dissimilar solar panel configurations

Science.gov (United States)

Suleiman, K.; Ali, U. A.; Yusuf, Ibrahim; Koko, A. D.; Bala, S. I.

2017-12-01

Several studies on photovoltaic systems focused on how it operates and energy required in operating it. Little attention is paid on its configurations, modeling of mean time to system failure, availability, cost benefit and comparisons of parallel and series-parallel designs. In this research work, four system configurations were studied. Configuration I consists of two sub-components arranged in parallel with 24 V each, configuration II consists of four sub-components arranged logically in parallel with 12 V each, configuration III consists of four sub-components arranged in series-parallel with 8 V each, and configuration IV has six sub-components with 6 V each arranged in series-parallel. Comparative analysis was made using Chapman Kolmogorov's method. The derivation for explicit expression of mean time to system failure, steady state availability and cost benefit analysis were performed, based on the comparison. Ranking method was used to determine the optimal configuration of the systems. The results of analytical and numerical solutions of system availability and mean time to system failure were determined and it was found that configuration I is the optimal configuration.

canvasDesigner: A versatile interactive high-resolution scientific multi-panel visualization toolkit.

Science.gov (United States)

Zhang, Baohong; Zhao, Shanrong; Neuhaus, Isaac

2018-05-03

We present a bioinformatics and systems biology visualization toolkit harmonizing real time interactive exploring and analyzing of big data, full-fledged customizing of look-n-feel, and producing multi-panel publication-ready figures in PDF format simultaneously. Source code and detailed user guides are available at http://canvasxpress.org, https://baohongz.github.io/canvasDesigner, and https://baohongz.github.io/canvasDesigner/demo_video.html. isaac.neuhaus@bms.com, baohong.zhang@pfizer.com, shanrong.zhao@pfizer.com. Supplementary materials are available at https://goo.gl/1uQygs.

Testability, Test Automation and Test Driven Development for the Trick Simulation Toolkit

Science.gov (United States)

Penn, John

2014-01-01

This paper describes the adoption of a Test Driven Development approach and a Continuous Integration System in the development of the Trick Simulation Toolkit, a generic simulation development environment for creating high fidelity training and engineering simulations at the NASA Johnson Space Center and many other NASA facilities. It describes the approach, and the significant benefits seen, such as fast, thorough and clear test feedback every time code is checked into the code repository. It also describes an approach that encourages development of code that is testable and adaptable.

Computational Chemistry Toolkit for Energetic Materials Design

Science.gov (United States)

2006-11-01

industry are aggressively engaged in efforts to develop multiscale modeling and simulation methodologies to model and analyze complex phenomena across...energetic materials design. It is hoped that this toolkit will evolve into a collection of well-integrated multiscale modeling methodologies...Experimenta Theoreticala This Work 1-5-Diamino-4- methyl- tetrazolium nitrate 8.4 41.7 47.5 1-5-Diamino-4- methyl- tetrazolium azide 138.1 161.6

Risk assessment of chemicals in foundries: The International Chemical Toolkit pilot-project

International Nuclear Information System (INIS)

Ribeiro, Marcela G.; Filho, Walter R.P.

2006-01-01

In Brazil, problems regarding protection from hazardous substances in small-sized enterprises are similar to those observed in many other countries. Looking for a simple tool to assess and control such exposures, FUNDACENTRO has started in 2005 a pilot-project to implement the International Chemical Control Toolkit. During the series of visits to foundries, it was observed that although many changes have occurred in foundry technology, occupational exposures to silica dust and metal fumes continue to occur, due to a lack of perception of occupational exposure in the work environment. After introducing the Chemical Toolkit concept to the foundry work group, it was possible to show that the activities undertaken to improve the management of chemicals, according to its concept, will support companies in fulfilling government legislations related to chemical management, occupational health and safety, and environmental impact. In the following meetings, the foundry work group and FUNDACENTRO research team will identify 'inadequate work situations'. Based on the Chemical Toolkit, improvement measures will be proposed. Afterwards, a survey will verify the efficency of those measures in the control of hazards and consequently on the management of chemicals. This step is now in course

Centralized configuration system for a large scale farm of network booted computers

Science.gov (United States)

Ballestrero, S.; Brasolin, F.; Dârlea, G.-L.; Dumitru, I.; Scannicchio, D. A.; Twomey, M. S.; Vâlsan, M. L.; Zaytsev, A.

2012-12-01

The ATLAS trigger and data acquisition online farm is composed of nearly 3,000 computing nodes, with various configurations, functions and requirements. Maintaining such a cluster is a big challenge from the computer administration point of view, thus various tools have been adopted by the System Administration team to help manage the farm efficiently. In particular, a custom central configuration system, ConfDBv2, was developed for the overall farm management. The majority of the systems are network booted, and are running an operating system image provided by a Local File Server (LFS) via the local area network (LAN). This method guarantees the uniformity of the system and allows, in case of issues, very fast recovery of the local disks which could be used as scratch area. It also provides greater flexibility as the nodes can be reconfigured and restarted with a different operating system in a very timely manner. A user-friendly web interface offers a quick overview of the current farm configuration and status, allowing changes to be applied on selected subsets or on the whole farm in an efficient and consistent manner. Also, various actions that would otherwise be time consuming and error prone can be quickly and safely executed. We describe the design, functionality and performance of this system and its web-based interface, including its integration with other CERN and ATLAS databases and with the monitoring infrastructure.

Configuration Method Design for Reconfigurable Manufacturing System with the aid of Plant Simulation

DEFF Research Database (Denmark)

Li, Yang; Zhang, Shuai; Bilberg, Arne

2014-01-01

A new Reconfigurable Manufacturing System structure has been recently designed by a large consumer goods manufacturer in Europe, aiming to balance the performance of productivity and flexibility. This article shows an exploratory research on the (re)configuration procedure of the new RMS structure....... Following the procedure which is designed in this paper, the (re)configuration of RMS can be managed as part of the daily operation with the help of computer simulation. Keywords: Plant Simulation, Tecnomatix, Reconfigurable Manufacturing System, modular manufacturing....

Configurable data and CAMAC hardware representations for implementation of the SPHERE DAQ and offline systems

International Nuclear Information System (INIS)

Isupov, A.Yu.

2001-01-01

An implementation of the experimental data configurable representation for using in the DAQ and offline systems of the SPHERE setup at the LHE, JINR is described. A software scheme of the SPHERE CAMAC hardware's configurable description, intended to online data acquisition (DAQ) implementation based on the qdpb system, is issued

Field trials of a novel toolkit for evaluating 'intangible' values-related dimensions of projects.

Science.gov (United States)

Burford, Gemma; Velasco, Ismael; Janoušková, Svatava; Zahradnik, Martin; Hak, Tomas; Podger, Dimity; Piggot, Georgia; Harder, Marie K

2013-02-01

A novel toolkit has been developed, using an original approach to develop its components, for the purpose of evaluating 'soft' outcomes and processes that have previously been generally considered 'intangible': those which are specifically values based. This represents a step-wise, significant, change in provision for the assessment of values-based achievements that are of absolutely key importance to most civil society organisations (CSOs) and values-based businesses, and fills a known gap in evaluation practice. In this paper, we demonstrate the significance and rigour of the toolkit by presenting an evaluation of it in three diverse scenarios where different CSOs use it to co-evaluate locally relevant outcomes and processes to obtain results which are both meaningful to them and potentially comparable across organisations. A key strength of the toolkit is its original use of a prior generated, peer-elicited 'menu' of values-based indicators which provides a framework for user CSOs to localise. Principles of participatory, process-based and utilisation-focused evaluation are embedded in this toolkit and shown to be critical to its success, achieving high face-validity and wide applicability. The emerging contribution of this next-generation evaluation tool to other fields, such as environmental values, development and environmental sustainable development, shared values, business, education and organisational change is outlined. Copyright © 2012 Elsevier Ltd. All rights reserved.

A Grassroots Remote Sensing Toolkit Using Live Coding, Smartphones, Kites and Lightweight Drones.

Directory of Open Access Journals (Sweden)

K Anderson

Full Text Available This manuscript describes the development of an android-based smartphone application for capturing aerial photographs and spatial metadata automatically, for use in grassroots mapping applications. The aim of the project was to exploit the plethora of on-board sensors within modern smartphones (accelerometer, GPS, compass, camera to generate ready-to-use spatial data from lightweight aerial platforms such as drones or kites. A visual coding 'scheme blocks' framework was used to build the application ('app', so that users could customise their own data capture tools in the field. The paper reports on the coding framework, then shows the results of test flights from kites and lightweight drones and finally shows how open-source geospatial toolkits were used to generate geographical information system (GIS-ready GeoTIFF images from the metadata stored by the app. Two Android smartphones were used in testing-a high specification OnePlus One handset and a lower cost Acer Liquid Z3 handset, to test the operational limits of the app on phones with different sensor sets. We demonstrate that best results were obtained when the phone was attached to a stable single line kite or to a gliding drone. Results show that engine or motor vibrations from powered aircraft required dampening to ensure capture of high quality images. We demonstrate how the products generated from the open-source processing workflow are easily used in GIS. The app can be downloaded freely from the Google store by searching for 'UAV toolkit' (UAV toolkit 2016, and used wherever an Android smartphone and aerial platform are available to deliver rapid spatial data (e.g. in supporting decision-making in humanitarian disaster-relief zones, in teaching or for grassroots remote sensing and democratic mapping.

A Grassroots Remote Sensing Toolkit Using Live Coding, Smartphones, Kites and Lightweight Drones.

Science.gov (United States)

Anderson, K; Griffiths, D; DeBell, L; Hancock, S; Duffy, J P; Shutler, J D; Reinhardt, W J; Griffiths, A

2016-01-01

This manuscript describes the development of an android-based smartphone application for capturing aerial photographs and spatial metadata automatically, for use in grassroots mapping applications. The aim of the project was to exploit the plethora of on-board sensors within modern smartphones (accelerometer, GPS, compass, camera) to generate ready-to-use spatial data from lightweight aerial platforms such as drones or kites. A visual coding 'scheme blocks' framework was used to build the application ('app'), so that users could customise their own data capture tools in the field. The paper reports on the coding framework, then shows the results of test flights from kites and lightweight drones and finally shows how open-source geospatial toolkits were used to generate geographical information system (GIS)-ready GeoTIFF images from the metadata stored by the app. Two Android smartphones were used in testing-a high specification OnePlus One handset and a lower cost Acer Liquid Z3 handset, to test the operational limits of the app on phones with different sensor sets. We demonstrate that best results were obtained when the phone was attached to a stable single line kite or to a gliding drone. Results show that engine or motor vibrations from powered aircraft required dampening to ensure capture of high quality images. We demonstrate how the products generated from the open-source processing workflow are easily used in GIS. The app can be downloaded freely from the Google store by searching for 'UAV toolkit' (UAV toolkit 2016), and used wherever an Android smartphone and aerial platform are available to deliver rapid spatial data (e.g. in supporting decision-making in humanitarian disaster-relief zones, in teaching or for grassroots remote sensing and democratic mapping).

Analysis and integration of multilevel inverter configuration with boost converters in a photovoltaic system

International Nuclear Information System (INIS)

Prabaharan, N.; Palanisamy, K.

2016-01-01

Highlights: • Integration of MLI with boost converters in photovoltaic system including MPPT. • Results are taken for different irradiations and different temperature condition. • Proposed system is tested with sudden step changes from standard test condition. • Analysis of switching losses and conduction loss is discussed. • Theoretical calculation of % THD using asymptotic formula is discussed. - Abstract: This paper proposes a single phase multilevel inverter configuration that conjoins three series connected full bridge inverter and a single half bridge inverter for renewable energy application especially photo-voltaic system. This configuration of multilevel inverter reduces the value of total harmonic distortion. The half bridge inverter utilized in the proposed configuration increases the output voltage level to nearly twice the output voltage level of a conventional cascaded H-bridge multilevel inverter. This higher output voltage level is generated with lesser number of power semiconductor switches compared to conventional configuration, thus reducing the total harmonic distortion and switching losses. The effectiveness of the proposed configuration is illustrated by replacing the isolated DC sources in multilevel inverter with individual photo-voltaic panels using separate perturb and observer based maximum power point tracking and boost converters. The verification of the proposed system is demonstrated successfully using MATLAB/Simulink based simulation with different irradiation and temperature conditions. Also, the transient operation of the system is verified with results depicted using step change in standard test condition. In the proposed system, total harmonic distortion of the output voltage is 9.85% without using passive filters and 3.91% with filter inductance. Theoretical calculation of the power losses and total harmonic distortion with mathematical equations are discussed. Selective experimental results are presented to prove the

Toolkit for local decision makers aims to strengthen environmental sustainability

CSIR Research Space (South Africa)

Murambadoro, M

2011-11-01

Full Text Available Members of the South African Risk and Vulnerability Atlas were involved in a meeting aimed at the development of a toolkit towards improved integration of climate change into local government's integrated development planning (IDP) process....

Open source tools and toolkits for bioinformatics: significance, and where are we?

Science.gov (United States)

Stajich, Jason E; Lapp, Hilmar

2006-09-01

This review summarizes important work in open-source bioinformatics software that has occurred over the past couple of years. The survey is intended to illustrate how programs and toolkits whose source code has been developed or released under an Open Source license have changed informatics-heavy areas of life science research. Rather than creating a comprehensive list of all tools developed over the last 2-3 years, we use a few selected projects encompassing toolkit libraries, analysis tools, data analysis environments and interoperability standards to show how freely available and modifiable open-source software can serve as the foundation for building important applications, analysis workflows and resources.

The IGUANA interactive graphics toolkit with examples from CMS and D0

International Nuclear Information System (INIS)

Alverson, G.; Osborne, I.; Taylor, L.; Tuura, L.

2001-01-01

IGUANA (Interactive Graphics for User ANAlysis) is a C++ toolkit for developing graphical user interfaces and high performance 2-D and 3-D graphics applications, such as data browsers and detector and event visualisation programs. The IGUANA strategy is to use freely available software (e.g. Qt, SoQt, OpenInventor, OpenGL, HEPVis) and package and extend it to provide a general-purpose and experiment-independent toolkit. The authors describe the evaluation and choices of publicly available GUI/graphics software and the additional functionality currently provided by IGUANA. The authors demonstrate the use of IGUANA with several applications built for CMS and D0

Configuration and application of He RFQ LLRF control system based on EPICS

Energy Technology Data Exchange (ETDEWEB)

Ahn, Tae-Sung; Jeong, Hae-Seong; Kim, Seong-Gu; Song, Young-Gi; Kim, Han-Sung; Seol, Kyung-Tae; Kwon, Hyeok-Jung; Cho, Yong-Sub [Korea Multipurpose Accelerator Complex, Gyeongju (Korea, Republic of)

2015-10-15

In He RFQ device, the high-power Radio-Frequency (RF) is very important because it is responsible for the stable delivery and efficient acceleration of the beam. Since that, the control system of high-power Radio-Frequency must be developed and this system is called LLRF control system. The LLRF control system required exquisite amplitude value that has ±1 % error range. We need a precise remote control system for this reason. This paper represents the configuration of LLRF control system in terms of software layers based on EPICS. Also, this paper explains the application of LLRF control system to test environment (hardware) and represents test result and suggests future work. The LLRF control system at the He RFQ is very important. The configuration of LLRF control system is completed on the software side and hardware modules: vxworks operating system installation, EPICS BASE compilation, module source code compiled, object file loading and execution on vxworks, EPICS IOC operation check, etc. The application of LLRF control system to module is implemented well: ADC module, DAC module, EPICS IOC test.

Improving safety on rural local and tribal roads safety toolkit.

Science.gov (United States)

2014-08-01

Rural roadway safety is an important issue for communities throughout the country and presents a challenge for state, local, and Tribal agencies. The Improving Safety on Rural Local and Tribal Roads Safety Toolkit was created to help rural local ...

PEA: an integrated R toolkit for plant epitranscriptome analysis.

Science.gov (United States)

Zhai, Jingjing; Song, Jie; Cheng, Qian; Tang, Yunjia; Ma, Chuang

2018-05-29

The epitranscriptome, also known as chemical modifications of RNA (CMRs), is a newly discovered layer of gene regulation, the biological importance of which emerged through analysis of only a small fraction of CMRs detected by high-throughput sequencing technologies. Understanding of the epitranscriptome is hampered by the absence of computational tools for the systematic analysis of epitranscriptome sequencing data. In addition, no tools have yet been designed for accurate prediction of CMRs in plants, or to extend epitranscriptome analysis from a fraction of the transcriptome to its entirety. Here, we introduce PEA, an integrated R toolkit to facilitate the analysis of plant epitranscriptome data. The PEA toolkit contains a comprehensive collection of functions required for read mapping, CMR calling, motif scanning and discovery, and gene functional enrichment analysis. PEA also takes advantage of machine learning technologies for transcriptome-scale CMR prediction, with high prediction accuracy, using the Positive Samples Only Learning algorithm, which addresses the two-class classification problem by using only positive samples (CMRs), in the absence of negative samples (non-CMRs). Hence PEA is a versatile epitranscriptome analysis pipeline covering CMR calling, prediction, and annotation, and we describe its application to predict N6-methyladenosine (m6A) modifications in Arabidopsis thaliana. Experimental results demonstrate that the toolkit achieved 71.6% sensitivity and 73.7% specificity, which is superior to existing m6A predictors. PEA is potentially broadly applicable to the in-depth study of epitranscriptomics. PEA Docker image is available at https://hub.docker.com/r/malab/pea, source codes and user manual are available at https://github.com/cma2015/PEA. chuangma2006@gmail.com. Supplementary data are available at Bioinformatics online.

The Virtual Physiological Human ToolKit.

Science.gov (United States)

Cooper, Jonathan; Cervenansky, Frederic; De Fabritiis, Gianni; Fenner, John; Friboulet, Denis; Giorgino, Toni; Manos, Steven; Martelli, Yves; Villà-Freixa, Jordi; Zasada, Stefan; Lloyd, Sharon; McCormack, Keith; Coveney, Peter V

2010-08-28

The Virtual Physiological Human (VPH) is a major European e-Science initiative intended to support the development of patient-specific computer models and their application in personalized and predictive healthcare. The VPH Network of Excellence (VPH-NoE) project is tasked with facilitating interaction between the various VPH projects and addressing issues of common concern. A key deliverable is the 'VPH ToolKit'--a collection of tools, methodologies and services to support and enable VPH research, integrating and extending existing work across Europe towards greater interoperability and sustainability. Owing to the diverse nature of the field, a single monolithic 'toolkit' is incapable of addressing the needs of the VPH. Rather, the VPH ToolKit should be considered more as a 'toolbox' of relevant technologies, interacting around a common set of standards. The latter apply to the information used by tools, including any data and the VPH models themselves, and also to the naming and categorizing of entities and concepts involved. Furthermore, the technologies and methodologies available need to be widely disseminated, and relevant tools and services easily found by researchers. The VPH-NoE has thus created an online resource for the VPH community to meet this need. It consists of a database of tools, methods and services for VPH research, with a Web front-end. This has facilities for searching the database, for adding or updating entries, and for providing user feedback on entries. Anyone is welcome to contribute.

Business plans--tips from the toolkit 6.

Science.gov (United States)

Steer, Neville

2010-07-01

General practice is a business. Most practices can stay afloat by having appointments, billing patients, managing the administration processes and working long hours. What distinguishes the high performance organisation from the average organisation is a business plan. This article examines how to create a simple business plan that can be applied to the general practice setting and is drawn from material contained in The Royal Australian College of General Practitioners' 'General practice management toolkit'.

Testing Video and Social Media for Engaging Users of the U.S. Climate Resilience Toolkit

Science.gov (United States)

Green, C. J.; Gardiner, N.; Niepold, F., III; Esposito, C.

2015-12-01

We developed a custom video production stye and a method for analyzing social media behavior so that we may deliberately build and track audience growth for decision-support tools and case studies within the U.S. Climate Resilience Toolkit. The new style of video focuses quickly on decision processes; its 30s format is well-suited for deployment through social media. We measured both traffic and engagement with video using Google Analytics. Each video included an embedded tag, allowing us to measure viewers' behavior: whether or not they entered the toolkit website; the duration of their session on the website; and the number pages they visited in that session. Results showed that video promotion was more effective on Facebook than Twitter. Facebook links generated twice the number of visits to the toolkit. Videos also increased Facebook interaction overall. Because most Facebook users are return visitors, this campaign did not substantially draw new site visitors. We continue to research and apply these methods in a targeted engagement and outreach campaign that utilizes the theory of social diffusion and social influence strategies to grow our audience of "influential" decision-makers and people within their social networks. Our goal is to increase access and use of the U.S. Climate Resilience Toolkit.

CRC-cards to support development and maintenance of product configuration systems

DEFF Research Database (Denmark)

Haug, Anders; Hvam, Lars

2009-01-01

This article presents a new definition of special Class, Responsibility and Collaboration (CRC) cards to be used for the development and maintenance of Product Configuration Systems (PCSs). CRC cards were introduced as an informal and user-friendly technique for teaching object-oriented modelling...... and maintenance of PCSs. This procedure has since been applied in several configuration projects and further developed at the Centre for Product Modelling (CPM) at the Technical University of Denmark. However, the investigations of two companies that applies CRC cards to document the knowledge base of their PCSs...

Impact of configuration management system of computer center on support of scientific projects throughout their lifecycle

International Nuclear Information System (INIS)

Bogdanov, A.V.; Yuzhanin, N.V.; Zolotarev, V.I.; Ezhakova, T.R.

2017-01-01

In this article the problem of scientific projects support throughout their lifecycle in the computer center is considered in every aspect of support. Configuration Management system plays a connecting role in processes related to the provision and support of services of a computer center. In view of strong integration of IT infrastructure components with the use of virtualization, control of infrastructure becomes even more critical to the support of research projects, which means higher requirements for the Configuration Management system. For every aspect of research projects support, the influence of the Configuration Management system is reviewed and development of the corresponding elements of the system is described in the present paper.

A GIS Software Toolkit for Monitoring Areal Snow Cover and Producing Daily Hydrologic Forecasts using NASA Satellite Imagery, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Aniuk Consulting, LLC, proposes to create a GIS software toolkit for monitoring areal snow cover extent and producing streamflow forecasts. This toolkit will be...

GENFIT - a generic track-fitting toolkit

Energy Technology Data Exchange (ETDEWEB)

Rauch, Johannes [Technische Universitaet Muenchen (Germany); Schlueter, Tobias [Ludwig-Maximilians-Universitaet Muenchen (Germany)

2014-07-01

GENFIT is an experiment-independent track-fitting toolkit, which combines fitting algorithms, track representations, and measurement geometries into a modular framework. We report on a significantly improved version of GENFIT, based on experience gained in the Belle II, PANDA, and FOPI experiments. Improvements concern the implementation of additional track-fitting algorithms, enhanced implementations of Kalman fitters, enhanced visualization capabilities, and additional implementations of measurement types suited for various kinds of tracking detectors. The data model has been revised, allowing for efficient track merging, smoothing, residual calculation and alignment.

A Gateway MultiSite recombination cloning toolkit.

Directory of Open Access Journals (Sweden)

Lena K Petersen

Full Text Available The generation of DNA constructs is often a rate-limiting step in conducting biological experiments. Recombination cloning of single DNA fragments using the Gateway system provided an advance over traditional restriction enzyme cloning due to increases in efficiency and reliability. Here we introduce a series of entry clones and a destination vector for use in two, three, and four fragment Gateway MultiSite recombination cloning whose advantages include increased flexibility and versatility. In contrast to Gateway single-fragment cloning approaches where variations are typically incorporated into model system-specific destination vectors, our Gateway MultiSite cloning strategy incorporates variations in easily generated entry clones that are model system-independent. In particular, we present entry clones containing insertions of GAL4, QF, UAS, QUAS, eGFP, and mCherry, among others, and demonstrate their in vivo functionality in Drosophila by using them to generate expression clones including GAL4 and QF drivers for various trp ion channel family members, UAS and QUAS excitatory and inhibitory light-gated ion channels, and QUAS red and green fluorescent synaptic vesicle markers. We thus establish a starter toolkit of modular Gateway MultiSite entry clones potentially adaptable to any model system. An inventory of entry clones and destination vectors for Gateway MultiSite cloning has also been established (www.gatewaymultisite.org.

Dependency of image quality on system configuration parameters in a stationary digital breast tomosynthesis system

Science.gov (United States)

Tucker, Andrew W.; Lu, Jianping; Zhou, Otto

2013-01-01

Purpose: In principle, a stationary digital breast tomosynthesis (s-DBT) system has better image quality when compared to continuous motion DBT systems due to zero motion blur of the source. The authors have developed a s-DBT system by using a linear carbon nanotube x-ray source array. The purpose of the current study was to quantitatively evaluate the performance of the s-DBT system; and investigate the dependence of imaging quality on the system configuration parameters. Methods: Physical phantoms were used to assess the image quality of each configuration including inplane resolution as measured by the modulation transfer function (MTF), inplane contrast as measured by the signal difference to noise ratio (SdNR), and depth resolution as measured by the z-axis artifact spread function. Five parameters were varied to create five groups of configurations: (1) total angular span; (2) total number of projection images; (3) distribution of exposure (mAs) across the projection images; (4) entrance dose; (5) detector pixel size. Results: It was found that the z-axis depth resolution increased with the total angular span but was insensitive to the number of projection images, mAs distribution, entrance dose, and detector pixel size. The SdNR was not affected by the angular span or the number of projection images. A decrease in SdNR was observed when the mAs was not evenly distributed across the projection images. As expected, the SdNR increased with entrance dose and when larger pixel sizes were used. For a given detector pixel size, the inplane resolution was found to be insensitive to the total angular span, number of projection images, mAs distribution, and entrance dose. A 25% increase in the MTF was observed when the detector was operating in full resolution mode (70 μm pixel size) compared to 2 × 2 binned mode (140 μm pixel size). Conclusions: The results suggest that the optimal imaging configuration for a s-DBT system is a large angular span, an intermittent

Microsoft System Center Configuration Manager advanced deployment

CERN Document Server

Coupland, Martyn

2014-01-01

If you are an experienced Configuration Manager administrator looking to advance your career or get more from your current environment, then this book is ideal for you. Prior experience of deploying and managing a Configuration Manager site would be helpful in following the examples throughout this book.

Active Sensor Configuration Validation for Refrigeration Systems

DEFF Research Database (Denmark)

Hovgaard, Tobias Gybel; Blanke, Mogens; Niemann, Hans Henrik

2010-01-01

-diagnosis methods falling short on this problem, this paper suggests an active diagnosis procedure to isolate sensor faults at the commissioning stage, before normal operation has started. Using statistical methods, residuals are evaluated versus multiple hypothesis models in a minimization process to uniquely......Major faults in the commissioning phase of refrigeration systems are caused by defects related to sensors. With a number of similar sensors available that do not differ by type but only by spatial location in the plant, interchange of sensors is a common defect. With sensors being used quite...... differently by the control system, fault-finding is difficult in practice and defects are regularly causing commissioning delays at considerable expense. Validation and handling of faults in the sensor configuration are therefore essential to cut costs during commissioning. With passive fault...

Communicating knowledge: Making embedded configuration work

DEFF Research Database (Denmark)

Oddsson, Gudmundur Valur; Hvam, Lars

2007-01-01

A lot of systems are assembled from near-independent mechatronic subsystems that have to be configured to match each other. An example of such systems are e.g. home entertainment systems, where TV, DVD and Receiver are matched to form an overall system, and compilation of pumps and controllers...... to form fresh water supply systems. Sometimes an external knowledge system keeps track of how each subsystem has to be configured, but the actual configuration is often done manually. Installing and maintaining those kinds of systems can be a tedious task and often requires repetitive labour. The idea...... is to “split-up” the product knowledge and encapsulate it into each subsystem. Then, when the subsystems are assembled, the configuration of each subsystem can either be done automatically or with minimum input. The concept could be called: embedded configuration. This article will try to connect three aspects...

Product Configuration Systems and Consequences for Productivity and Quality

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance......Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...

Configuration management

International Nuclear Information System (INIS)

Beavers, R.R.; Sumiec, K.F.

1989-01-01

Increasing regulatory and industry attention has been focused on properly controlling electrical design changes. These changes can be controlled by using configuration management techniques. Typically, there are ongoing modifications to various process systems or additions due to new requirements at every power plant. Proper control of these changes requires that an organized method be used to ensure that all important parameters of the electrical auxiliary systems are analyzed and that these parameters are evaluated accurately. This process, commonly referred to as configuration management, is becoming more important on both fossil and nuclear plants. Recent NRC- and utility-initiated inspections have identified problems due to incomplete analysis of changes to electrical auxiliary systems at nuclear stations

Evaluating the parent-adolescent communication toolkit: Usability and preliminary content effectiveness of an online intervention.

Science.gov (United States)

Toombs, Elaine; Unruh, Anita; McGrath, Patrick

2018-01-01

This study aimed to assess the Parent-Adolescent Communication Toolkit, an online intervention designed to help improve parent communication with their adolescents. Participant preferences for two module delivery systems (sequential and unrestricted module access) were identified. Usability assessment of the PACT intervention was completed using pre-test and posttest comparisons. Usability data, including participant completion and satisfaction ratings were examined. Parents ( N  =   18) of adolescents were randomized to a sequential or unrestricted chapter access group. Parent participants completed pre-test measures, the PACT intervention and posttest measures. Participants provided feedback for the intervention to improve modules and provided usability ratings. Adolescent pre- and posttest ratings were evaluated. Usability ratings were high and parent feedback was positive. The sequential module access groups rated the intervention content higher and completed more content than the unrestricted chapter access group, indicating support for the sequential access design. Parent mean posttest communication scores were significantly higher ( p  Communication Toolkit has potential to improve parent-adolescent communication but further effectiveness assessment is required.

Development and implementation of product configuration systems - a change management perspective

DEFF Research Database (Denmark)

Møldrup, Morten; Møller, Niels

2004-01-01

Product configuration systems (PCS) are IT-based expert systems, which contain product information and knowledge and in turn provide the basis for automating the decision-making processes in the order acquisition phase. Thereby PCS support and streamline the efforts of an organisations sales force...... in translating customer demands into customized products within a bounded range of product variation. Supported by a PCS the sales representatives are empowered to configure products without having to consult experts about product specific dependencies. Although several research projects have been carried out...... within the field of PCS, these efforts have primarily been focused on technical aspects. Based on experiences gained from twelve case studies in the context of the PETO (*) project, this article therefore sets out to broaden the scope of the PCS field to embrace managerial and organizational aspects...

Configuration Control Office

CERN Multimedia

Beltramello, O

In order to enable Technical Coordination to manage the detector configuration and to be aware of all changes in this configuration, a baseline of the envelopes has been created in April 2001. Fifteen system and multi-system envelope drawings have been approved and baselined. An EDMS file is associated with each approved envelope, which provides a list of the current known unsolved conflicts related to the envelope and a list of remaining drawing inconsistencies to be corrected. The envelope status with the associated drawings and EDMS file can be found on the web at this adress: http://atlasinfo.cern.ch/Atlas/TCOORD/Activities/Installation/Configuration/ Any modification in the baseline has to be requested via the Engineering Change Requests. The procedure can be found under: http://atlasinfo.cern.ch/Atlas/TCOORD/Activities/TcOffice/Quality/ECR/ TC will review all the systems envelopes in the near future and manage conflict resolution with the collaboration of the systems.

The doctor-patient relationship as a toolkit for uncertain clinical decisions.

Science.gov (United States)

Diamond-Brown, Lauren

2016-06-01

Medical uncertainty is a well-recognized problem in healthcare, yet how doctors make decisions in the face of uncertainty remains to be understood. This article draws on interdisciplinary literature on uncertainty and physician decision-making to examine a specific physician response to uncertainty: using the doctor-patient relationship as a toolkit. Additionally, I ask what happens to this process when the doctor-patient relationship becomes fragmented. I answer these questions by examining obstetrician-gynecologists' narratives regarding how they make decisions when faced with uncertainty in childbirth. Between 2013 and 2014, I performed 21 semi-structured interviews with obstetricians in the United States. Obstetricians were selected to maximize variation in relevant physician, hospital, and practice characteristics. I began with grounded theory and moved to analytical coding of themes in relation to relevant literature. My analysis renders it evident that some physicians use the doctor-patient relationship as a toolkit for dealing with uncertainty. I analyze how this process varies for physicians in different models of care by comparing doctors' experiences in models with continuous versus fragmented doctor-patient relationships. My key findings are that obstetricians in both models appealed to the ideal of patient-centered decision-making to cope with uncertain decisions, but in practice physicians in fragmented care faced a number of challenges to using the doctor-patient relationship as a toolkit for decision-making. These challenges led to additional uncertainties and in some cases to poor outcomes for doctors and/or patients; they also raised concerns about the reproduction of inequality. Thus organization of care delivery mitigates the efficacy of doctors' use of the doctor-patient relationship toolkit for uncertain decisions. These findings have implications for theorizing about decision-making under conditions of medical uncertainty, for understanding

Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies. Appendix D: EOS configuration design data. Part 2: Data management system configuration

Science.gov (United States)

1974-01-01

The Earth Observatory Satellite (EOS) data management system (DMS) is discussed. The DMS is composed of several subsystems or system elements which have basic purposes and are connected together so that the DMS can support the EOS program by providing the following: (1) payload data acquisition and recording, (2) data processing and product generation, (3) spacecraft and processing management and control, and (4) data user services. The configuration and purposes of the primary or high-data rate system and the secondary or local user system are explained. Diagrams of the systems are provided to support the systems analysis.

Evaluating Teaching Development Activities in Higher Education: A Toolkit

Science.gov (United States)

Kneale, Pauline; Winter, Jennie; Turner, Rebecca; Spowart, Lucy; Hughes, Jane; McKenna, Colleen; Muneer, Reema

2016-01-01

This toolkit is developed as a resource for providers of teaching-related continuing professional development (CPD) in higher education (HE). It focuses on capturing the longer-term value and impact of CPD for teachers and learners, and moving away from immediate satisfaction measures. It is informed by the literature on evaluating higher…

Example of software configuration management model

International Nuclear Information System (INIS)

Roth, P.

2006-01-01

Software configuration management is the mechanism used to track and control software changes and may include the following actions: A tracking system should be established for any changes made to the existing software configuration. Requirement of the configuration management system are the following: - Backup the different software configuration; - Record the details (the date, the subject, the filenames, the supporting documents, the tests, ...) of the changes introduced in the new configuration; - Document all the differences between the different versions. Configuration management allows simultaneous exploitation of one specific version and development of the next version. Minor correction can be perform in the current exploitation version

Impact of configuration management system of computer center on support of scientific projects throughout their lifecycle

Science.gov (United States)

Bogdanov, A. V.; Iuzhanin, N. V.; Zolotarev, V. I.; Ezhakova, T. R.

2017-12-01

In this article the problem of scientific projects support throughout their lifecycle in the computer center is considered in every aspect of support. Configuration Management system plays a connecting role in processes related to the provision and support of services of a computer center. In view of strong integration of IT infrastructure components with the use of virtualization, control of infrastructure becomes even more critical to the support of research projects, which means higher requirements for the Configuration Management system. For every aspect of research projects support, the influence of the Configuration Management system is being reviewed and development of the corresponding elements of the system is being described in the present paper.

Development of an evidence-informed leisure time physical activity resource for adults with spinal cord injury: the SCI Get Fit Toolkit.

Science.gov (United States)

Arbour-Nicitopoulos, K P; Martin Ginis, K A; Latimer-Cheung, A E; Bourne, C; Campbell, D; Cappe, S; Ginis, S; Hicks, A L; Pomerleau, P; Smith, K

2013-06-01

To systematically develop an evidence-informed leisure time physical activity (LTPA) resource for adults with spinal cord injury (SCI). Canada. The Appraisal of Guidelines, Research and Evaluation (AGREE) II protocol was used to develop a toolkit to teach and encourage adults with SCI how to make smart and informed choices about being physically active. A multidisciplinary expert panel appraised the evidence and generated specific recommendations for the content of the toolkit. Pilot testing was conducted to refine the toolkit's presentation. Recommendations emanating from the consultation process were that the toolkit be a brief, evidence-based resource that contains images of adults with tetraplegia and paraplegia, and links to more detailed online information. The content of the toolkit should include the physical activity guidelines (PAGs) for adults with SCI, activities tailored to manual and power chair users, the benefits of LTPA, and strategies to overcome common LTPA barriers for adults with SCI. The inclusion of action plans and safety tips was also recommended. These recommendations have resulted in the development of an evidence-informed LTPA resource to assist adults with SCI in meeting the PAGs. This toolkit will have important implications for consumers, health care professionals and policy makers for encouraging LTPA in the SCI community.

A Cas9-based toolkit to program gene expression in Saccharomyces cerevisiae

DEFF Research Database (Denmark)

Apel, Amanda Reider; d'Espaux, Leo; Wehrs, Maren

2017-01-01

of these parts via a web-based tool, that automates the generation of DNA fragments for integration. Our system builds upon existing gene editing methods in the thoroughness with which the parts are standardized and characterized, the types and number of parts available and the ease with which our methodology...... can be used to perform genetic edits in yeast. We demonstrated the applicability of this toolkit by optimizing the expression of a challenging but industrially important enzyme, taxadiene synthase (TXS). This approach enabled us to diagnose an issue with TXS solubility, the resolution of which yielded...

The advanced computational testing and simulation toolkit (ACTS)

International Nuclear Information System (INIS)

Drummond, L.A.; Marques, O.

2002-01-01

During the past decades there has been a continuous growth in the number of physical and societal problems that have been successfully studied and solved by means of computational modeling and simulation. Distinctively, a number of these are important scientific problems ranging in scale from the atomic to the cosmic. For example, ionization is a phenomenon as ubiquitous in modern society as the glow of fluorescent lights and the etching on silicon computer chips; but it was not until 1999 that researchers finally achieved a complete numerical solution to the simplest example of ionization, the collision of a hydrogen atom with an electron. On the opposite scale, cosmologists have long wondered whether the expansion of the Universe, which began with the Big Bang, would ever reverse itself, ending the Universe in a Big Crunch. In 2000, analysis of new measurements of the cosmic microwave background radiation showed that the geometry of the Universe is flat, and thus the Universe will continue expanding forever. Both of these discoveries depended on high performance computer simulations that utilized computational tools included in the Advanced Computational Testing and Simulation (ACTS) Toolkit. The ACTS Toolkit is an umbrella project that brought together a number of general purpose computational tool development projects funded and supported by the U.S. Department of Energy (DOE). These tools, which have been developed independently, mainly at DOE laboratories, make it easier for scientific code developers to write high performance applications for parallel computers. They tackle a number of computational issues that are common to a large number of scientific applications, mainly implementation of numerical algorithms, and support for code development, execution and optimization. The ACTS Toolkit Project enables the use of these tools by a much wider community of computational scientists, and promotes code portability, reusability, reduction of duplicate efforts

The advanced computational testing and simulation toolkit (ACTS)

Energy Technology Data Exchange (ETDEWEB)

Drummond, L.A.; Marques, O.

2002-05-21

During the past decades there has been a continuous growth in the number of physical and societal problems that have been successfully studied and solved by means of computational modeling and simulation. Distinctively, a number of these are important scientific problems ranging in scale from the atomic to the cosmic. For example, ionization is a phenomenon as ubiquitous in modern society as the glow of fluorescent lights and the etching on silicon computer chips; but it was not until 1999 that researchers finally achieved a complete numerical solution to the simplest example of ionization, the collision of a hydrogen atom with an electron. On the opposite scale, cosmologists have long wondered whether the expansion of the Universe, which began with the Big Bang, would ever reverse itself, ending the Universe in a Big Crunch. In 2000, analysis of new measurements of the cosmic microwave background radiation showed that the geometry of the Universe is flat, and thus the Universe will continue expanding forever. Both of these discoveries depended on high performance computer simulations that utilized computational tools included in the Advanced Computational Testing and Simulation (ACTS) Toolkit. The ACTS Toolkit is an umbrella project that brought together a number of general purpose computational tool development projects funded and supported by the U.S. Department of Energy (DOE). These tools, which have been developed independently, mainly at DOE laboratories, make it easier for scientific code developers to write high performance applications for parallel computers. They tackle a number of computational issues that are common to a large number of scientific applications, mainly implementation of numerical algorithms, and support for code development, execution and optimization. The ACTS Toolkit Project enables the use of these tools by a much wider community of computational scientists, and promotes code portability, reusability, reduction of duplicate efforts

Study of operational risk-based configuration control

Energy Technology Data Exchange (ETDEWEB)

Vesely, W E [Science Applications International Corp., Dublin, OH (United States); Samanta, P K; Kim, I S [Brookhaven National Lab., Upton, NY (United States)

1991-08-01

This report studies aspects of a risk-based configuration control system to detect and control plant configurations from a risk perspective. Configuration control, as the term is used here, is the management of component configurations to achieve specific objectives. One important objective is to control risk and safety. Another is to operate efficiently and make effective use of available resources. PSA-based evaluations are performed to study configuration to core-melt frequency and core-melt probability for two plants. Some equipment configurations can cause large core-melt frequency and there are a number of such configurations that are not currently controlled by technical specifications. However, the expected frequency of occurrence of the impacting configurations is small and the core-melt probability contributions are also generally small. The insights from this evaluation are used to develop the framework for an effective risk-based configuration control system. The focal points of such a system and the requirements for tools development for implementing the system are defined. The requirements of risk models needed for the system, and the uses of plant-specific data are also discussed. 18 refs., 25 figs., 10 tabs.

Computer software configuration description, 241-AY and 241-AZ tank farm MICON automation system

International Nuclear Information System (INIS)

Winkelman, W.D.

1998-01-01

This document describes the configuration process, choices and conventions used during the configuration activities, and issues involved in making changes to the configuration. Includes the master listings of the Tag definitions, which should be revised to authorize any changes. Revision 2 incorporates minor changes to ensure the document setpoints accurately reflect limits (including exhaust stack flow of 800 scfm) established in OSD-T-151-00019. The MICON DCS software controls and monitors the instrumentation and equipment associated with plant systems and processes

Measuring acceptance of an assistive social robot: a suggested toolkit

NARCIS (Netherlands)

Heerink, M.; Kröse, B.; Evers, V.; Wielinga, B.

2009-01-01

The human robot interaction community is multidisciplinary by nature and has members from social science to engineering backgrounds. In this paper we aim to provide human robot developers with a straightforward toolkit to evaluate users' acceptance of assistive social robots they are designing or

Pydpiper: A Flexible Toolkit for Constructing Novel Registration Pipelines

Directory of Open Access Journals (Sweden)

Miriam eFriedel

2014-07-01

Full Text Available Using neuroimaging technologies to elucidate the relationship between genotype and phenotype and brain and behavior will be a key contribution to biomedical research in the twenty-first century. Among the many methods for analyzing neuroimaging data, image registration deserves particular attention due to its wide range of applications. Finding strategies to register together many images and analyze the differences between them can be a challenge, particularly given that different experimental designs require different registration strategies. Moreover, writing software that can handle different types of image registration pipelines in a flexible, reusable and extensible way can be challenging. In response to this challenge, we have created Pydpiper, a neuroimaging registration toolkit written in Python. Pydpiper is an open-source, freely available pipeline framework that provides multiple modules for various image registration applications. Pydpiper offers five key innovations. Specifically: (1 a robust file handling class that allows access to outputs from all stages of registration at any point in the pipeline; (2 the ability of the framework to eliminate duplicate stages; (3 reusable, easy to subclass modules; (4 a development toolkit written for non-developers; (5 four complete applications that run complex image registration pipelines ``out-of-the-box.'' In this paper, we will discuss both the general Pydpiper framework and the various ways in which component modules can be pieced together to easily create new registration pipelines. This will include a discussion of the core principles motivating code development and a comparison of Pydpiper with other available toolkits. We also provide a comprehensive, line-by-line example to orient users with limited programming knowledge and highlight some of the most useful features of Pydpiper. In addition, we will present the four current applications of the code.

Pydpiper: a flexible toolkit for constructing novel registration pipelines.

Science.gov (United States)

Friedel, Miriam; van Eede, Matthijs C; Pipitone, Jon; Chakravarty, M Mallar; Lerch, Jason P

2014-01-01

Using neuroimaging technologies to elucidate the relationship between genotype and phenotype and brain and behavior will be a key contribution to biomedical research in the twenty-first century. Among the many methods for analyzing neuroimaging data, image registration deserves particular attention due to its wide range of applications. Finding strategies to register together many images and analyze the differences between them can be a challenge, particularly given that different experimental designs require different registration strategies. Moreover, writing software that can handle different types of image registration pipelines in a flexible, reusable and extensible way can be challenging. In response to this challenge, we have created Pydpiper, a neuroimaging registration toolkit written in Python. Pydpiper is an open-source, freely available software package that provides multiple modules for various image registration applications. Pydpiper offers five key innovations. Specifically: (1) a robust file handling class that allows access to outputs from all stages of registration at any point in the pipeline; (2) the ability of the framework to eliminate duplicate stages; (3) reusable, easy to subclass modules; (4) a development toolkit written for non-developers; (5) four complete applications that run complex image registration pipelines "out-of-the-box." In this paper, we will discuss both the general Pydpiper framework and the various ways in which component modules can be pieced together to easily create new registration pipelines. This will include a discussion of the core principles motivating code development and a comparison of Pydpiper with other available toolkits. We also provide a comprehensive, line-by-line example to orient users with limited programming knowledge and highlight some of the most useful features of Pydpiper. In addition, we will present the four current applications of the code.

A flexible and configurable system to test accelerator magnets

Energy Technology Data Exchange (ETDEWEB)

Jerzy M. Nogiec et al.

2001-07-20

Fermilab's accelerator magnet R and D programs, including production of superconducting high gradient quadrupoles for the LHC insertion regions, require rigorous yet flexible magnetic measurement systems. Measurement systems must be capable of handling various types of hardware and extensible to all measurement technologies and analysis algorithms. A tailorable software system that satisfies these requirements is discussed. This single system, capable of distributed parallel signal processing, is built on top of a flexible component-based framework that allows for easy reconfiguration and run-time modification. Both core and domain-specific components can be assembled into various magnet test or analysis systems. The system configured to comprise a rotating coil harmonics measurement is presented. Technologies as Java, OODB, XML, JavaBeans, software bus and component-based architectures are used.

Development and maintenance of product configuration systems: Requirements for a documentation tool

DEFF Research Database (Denmark)

Hvam, Lars; Christensen, Simon Pape; Jensen, Klaes Ladeby

2005-01-01

by letting a documentation tool handle trivial time consuming tasks (notification on change, consistency check etc.), as a computer often handles these tasks in a better way. Thus, a serious bottleneck in the maintenance of configuration systems can be eliminated by applying Information System (IS...

Quality plan and configuration management in complex systems

International Nuclear Information System (INIS)

Gonzalez Junto, J.; Merchan Teyssiere

1993-01-01

Since the Second World War, the philosophy behind the quality systems of industries and service companies has evolved to embrace the whole life cycle of the product, system or service. In this evolution process, quality has become a strategic factor in the survival of entreprises. The first steps in trying to establish quality systems were taken for the armed forces, followed by space, aeronautical and nuclear projects, whose products were more and more complex and sophisticated. These systems were established by means of quality plans or programmes, and their basic objective was to guarantee a high safety level for the user and/or the general population. In later years, the main concern was to reach a determined quality level not only in one phase of the product life, but in the complete life cycle of the final product. Today a new goal is established and pursued: better quality of the product, service or system life cycle at a lower cost. Methods of improving the quality of systems and processes are the subject of numerous initiatives and studies, to better availability and maintainability of complex equipment or installations, with an extended useful life and greater requirements. Experience in the performance of complex projects shows that a higher quality may be obtained through designing a comprehensive quality plan which pays special attention to information management and modifications of the original design. Obtaining a high reliability level for an installation (equipment, systems, etc), increasing its availability and rationalizing its maintenance may be little less than fanciful without a deep knowledge of the installation, of its activities and its current status in day-to-day operation, which shows the importance of truthful information available to operators and corresponding exactly to their needs. In this frame of mind, a quality plan comprising a configuration management system of information and documents constitutes the basic support tool for

Comparative analysis of different configurations of PLC-based safety systems from reliability point of view

Science.gov (United States)

Tapia, Moiez A.

1993-01-01

The study of a comparative analysis of distinct multiplex and fault-tolerant configurations for a PLC-based safety system from a reliability point of view is presented. It considers simplex, duplex and fault-tolerant triple redundancy configurations. The standby unit in case of a duplex configuration has a failure rate which is k times the failure rate of the standby unit, the value of k varying from 0 to 1. For distinct values of MTTR and MTTF of the main unit, MTBF and availability for these configurations are calculated. The effect of duplexing only the PLC module or only the sensors and the actuators module, on the MTBF of the configuration, is also presented. The results are summarized and merits and demerits of various configurations under distinct environments are discussed.

The PyRosetta Toolkit: a graphical user interface for the Rosetta software suite.

Science.gov (United States)

Adolf-Bryfogle, Jared; Dunbrack, Roland L

2013-01-01

The Rosetta Molecular Modeling suite is a command-line-only collection of applications that enable high-resolution modeling and design of proteins and other molecules. Although extremely useful, Rosetta can be difficult to learn for scientists with little computational or programming experience. To that end, we have created a Graphical User Interface (GUI) for Rosetta, called the PyRosetta Toolkit, for creating and running protocols in Rosetta for common molecular modeling and protein design tasks and for analyzing the results of Rosetta calculations. The program is highly extensible so that developers can add new protocols and analysis tools to the PyRosetta Toolkit GUI.

An Ethical Toolkit for Food Companies: Reflection on its Use

NARCIS (Netherlands)

Deblonde, M.K.; Graaff, R.; Brom, F.W.A.

2007-01-01

Nowadays many debates are going on that relate to the agricultural and food sector. It looks as if present technological and organizational developments within the agricultural and food sector are badly geared to societal needs and expectations. In this article we briefly present a toolkit for moral

Toolkit for US colleges/schools of pharmacy to prepare learners for careers in academia.

Science.gov (United States)

Haines, Seena L; Summa, Maria A; Peeters, Michael J; Dy-Boarman, Eliza A; Boyle, Jaclyn A; Clifford, Kalin M; Willson, Megan N

2017-09-01

The objective of this article is to provide an academic toolkit for use by colleges/schools of pharmacy to prepare student pharmacists/residents for academic careers. Through the American Association of Colleges of Pharmac (AACP) Section of Pharmacy Practice, the Student Resident Engagement Task Force (SRETF) collated teaching materials used by colleges/schools of pharmacy from a previously reported national survey. The SRETF developed a toolkit for student pharmacists/residents interested in academic pharmacy. Eighteen institutions provided materials; five provided materials describing didactic coursework; over fifteen provided materials for an academia-focused Advanced Pharmacy Practice Experiences (APPE), while one provided materials for an APPE teaching-research elective. SRETF members created a syllabus template and sample lesson plan by integrating submitted resources. Submissions still needed to complete the toolkit include examples of curricular tracks and certificate programs. Pharmacy faculty vacancies still exist in pharmacy education. Engaging student pharmacists/residents about academia pillars of teaching, scholarship and service is critical for the future success of the academy. Published by Elsevier Inc.

Relationship of the Van Herick Grading System with Peripheral Iris Configuration and Level of Iris Insertion.

Science.gov (United States)

Khan, Faisal Aziz; Niazi, Shafaq Pervez Khan; Khan, Assad Zaman

2017-09-01

To determine the relationship of the van Herick angle grading system with the level of iris insertion and peripheral iris configuration. Observational study. Eye department, Combined Military Hospital, Malir Cantt., Karachi, from May to October 2015. Sixty-five eyes of 65 patients were recruited. Anterior chamber depth at the temporal limbus was measured as a fraction of corneal section thickness using van Herick technique and graded on the standard 4-point scale of the van Herick grading system. Gonioscopy of the temporal quadrant was performed with a Posner 4 mirror goniolens and both the true level of iris insertion and peripheral iris configuration were recorded on a 4-point scale so as to equate with the van Herick 4-point grading system. Spearman's rho test was applied to determine the relationship of the van Herick grading system with level of iris root insertion and peripheral iris configuration. Amoderate positive correlation between van Herick grade and peripheral iris configuration was found which was statistically significant (rs=0.42, p < 0.001). Astatistically significant and moderate positive correlation was also detected between van Herick grade and the level of iris insertion (rs=0.45, p < 0.001). The van Herick grade has a moderately positive relationship with the peripheral iris configuration and true level of iris insertion.

A Modular Re-configurable Rover System

Science.gov (United States)

Bouloubasis, A.; McKee, G.; Active Robotics Lab

In this paper we present the novel concepts incorporated in a planetary surface exploration rover design that is currently under development. The Multitasking Rover (MTR) aims to demonstrate functionality that will cover many of the current and future needs such as rough-terrain mobility, modularity and upgradeability [1]. The rover system has enhanced mobility characteristics. It operates in conjunction with Science Packs (SPs) and Tool Packs (TPs) - modules attached to the main frame of the rover, which are either special tools or science instruments and alter the operation capabilities of the system. To date, each rover system design is very much task driven for example, the scenario of cooperative transportation of extended payloads [2], comprises two rovers each equipped with a manipulator dedicated to the task [3]. The MTR approach focuses mostly on modularity and upgradeability presenting at the same time a fair amount of internal re-configurability for the sake of rough terrain stability. The rover itself does not carry any scientific instruments or tools. To carry out the scenario mentioned above, the MTR would have to locate and pick-up a TP with the associated manipulator. After the completion of the task the TP could be put away to a storage location enabling the rover to utilize a different Pack. The rover will not only offer mobility to these modules, but also use them as tools, transforming its role and functionality. The advantage of this approach is that instead of sending a large number of rovers to perform a variety of tasks, a smaller number of MTRs could be deployed with a large number of SPs/TPs, offering multiples of the functionality at a reduced payload. Two SPs or TPs (or a combination of) can be carried and deployed. One of the key elements in the design of the four wheeled rover, lies within its suspension system. It comprises a linear actuator located within each leg and also an active differential linking the two shoulders. This novel

A configurable electronics system for the ESS-Bilbao beam position monitors

Science.gov (United States)

Muguira, L.; Belver, D.; Etxebarria, V.; Varnasseri, S.; Arredondo, I.; del Campo, M.; Echevarria, P.; Garmendia, N.; Feuchtwanger, J.; Jugo, J.; Portilla, J.

2013-09-01

A versatile and configurable system has been developed in order to monitorize the beam position and to meet all the requirements of the future ESS-Bilbao Linac. At the same time the design has been conceived to be open and configurable so that it could eventually be used in different kinds of accelerators, independent of the charged particle, with minimal change. The design of the Beam Position Monitors (BPMs) system includes a test bench both for button-type pick-ups (PU) and striplines (SL), the electronic units and the control system. The electronic units consist of two main parts. The first part is an Analog Front-End (AFE) unit where the RF signals are filtered, conditioned and converted to base-band. The second part is a Digital Front-End (DFE) unit which is based on an FPGA board where the base-band signals are sampled in order to calculate the beam position, the amplitude and the phase. To manage the system a Multipurpose Controller (MC) developed at ESSB has been used. It includes the FPGA management, the EPICS integration and Archiver Instances. A description of the system and a comparison between the performance of both PU and SL BPM designs measured with this electronics system are fully described and discussed.

Structural design of the toroidal configuration of the HTS SMES cooling system

International Nuclear Information System (INIS)

Yeom, H.K.; Koh, D.Y.; Ko, J.S.; Kim, H.B.; Hong, Y.J.; Kim, S.H.; Seong, K.C.

2011-01-01

The superconducting magnetic energy storage (SMES) system is working on around 30 K, because the magnet is made of high temperature superconductor. To maintain the cryogenic temperature, the superconducting coil is cooled by cryogen, helium gas or liquid neon. But there are some weak points in the cryogen cooling system. For example periodic charge of the cryogen and size is big and so on. So, we have designed the conduction cooling system for toroidal configuration HTS SMES. The toroidal type HTS SMES has some merits, so it is very small magnetic field leakage, and magnetic field applied perpendicular to the tape surface can be reduced. Our system has 28 numbers of HTS double pancake coils and they are arrayed toroidal configuration. The toroidal inner radius is 162 mm, and outer radius is 599 mm, and height is about 162 mm. In this study, we have designed the cooling structure and analyzed temperature distribution of cooling path, thermal stress and deformation of the cooling structure.

Enabling System Evolution through Configuration Management on the Hardware/Software Boundary

NARCIS (Netherlands)

Krikhaar, R.L.; Mosterman, W.; Veerman, N.P.; Verhoef, C.

2009-01-01

As the use of software and electronics in modern products is omnipresent and continuously increasing, companies in the embedded systems industry face increasing complexity in controlling and enabling the evolution of their IT-intensive products. Traditionally, product configurations and their

Mocapy++ - a toolkit for inference and learning in dynamic Bayesian networks

DEFF Research Database (Denmark)

Paluszewski, Martin; Hamelryck, Thomas Wim

2010-01-01

Background Mocapy++ is a toolkit for parameter learning and inference in dynamic Bayesian networks (DBNs). It supports a wide range of DBN architectures and probability distributions, including distributions from directional statistics (the statistics of angles, directions and orientations...

Monte Carlo application based on GEANT4 toolkit to simulate a laser–plasma electron beam line for radiobiological studies

Energy Technology Data Exchange (ETDEWEB)

Lamia, D., E-mail: debora.lamia@ibfm.cnr.it [Institute of Molecular Bioimaging and Physiology IBFM CNR – LATO, Cefalù (Italy); Russo, G., E-mail: giorgio.russo@ibfm.cnr.it [Institute of Molecular Bioimaging and Physiology IBFM CNR – LATO, Cefalù (Italy); Casarino, C.; Gagliano, L.; Candiano, G.C. [Institute of Molecular Bioimaging and Physiology IBFM CNR – LATO, Cefalù (Italy); Labate, L. [Intense Laser Irradiation Laboratory (ILIL) – National Institute of Optics INO CNR, Pisa (Italy); National Institute for Nuclear Physics INFN, Pisa Section and Frascati National Laboratories LNF (Italy); Baffigi, F.; Fulgentini, L.; Giulietti, A.; Koester, P.; Palla, D. [Intense Laser Irradiation Laboratory (ILIL) – National Institute of Optics INO CNR, Pisa (Italy); Gizzi, L.A. [Intense Laser Irradiation Laboratory (ILIL) – National Institute of Optics INO CNR, Pisa (Italy); National Institute for Nuclear Physics INFN, Pisa Section and Frascati National Laboratories LNF (Italy); Gilardi, M.C. [Institute of Molecular Bioimaging and Physiology IBFM CNR, Segrate (Italy); University of Milano-Bicocca, Milano (Italy)

2015-06-21

We report on the development of a Monte Carlo application, based on the GEANT4 toolkit, for the characterization and optimization of electron beams for clinical applications produced by a laser-driven plasma source. The GEANT4 application is conceived so as to represent in the most general way the physical and geometrical features of a typical laser-driven accelerator. It is designed to provide standard dosimetric figures such as percentage dose depth curves, two-dimensional dose distributions and 3D dose profiles at different positions both inside and outside the interaction chamber. The application was validated by comparing its predictions to experimental measurements carried out on a real laser-driven accelerator. The work is aimed at optimizing the source, by using this novel application, for radiobiological studies and, in perspective, for medical applications. - Highlights: • Development of a Monte Carlo application based on GEANT4 toolkit. • Experimental measurements carried out with a laser-driven acceleration system. • Validation of Geant4 application comparing experimental data with the simulated ones. • Dosimetric characterization of the acceleration system.

Configuration management at NEK

International Nuclear Information System (INIS)

Podhraski, M.

1999-01-01

Configuration Management (CM) objectives at NEK are to ensure consistency between Design Requirements, Physical Plant Configuration and Configuration Information. Software applications, supporting Design Change, Work Control and Document Control Processes, are integrated in one module-oriented Management Information System (MIS). Master Equipment Component List (MECL) database is central MIS module. Through a combination of centralized database and process migrated activities it is ensured that the CM principles and requirements (accurate, current design data matching plant's physical configuration while complying to applicable requirements), are followed and fulfilled.(author)

Configuration Management

International Nuclear Information System (INIS)

Morcos, A.; Taylor, H. S.

1989-01-01

This paper will briefly discuss the reason for and content of configuration management both for new plants and, when adapted, for older plants. It will then address three types of activities a utility may undertake as part of a nuclear CAM program and with which Sargent and Leyden has been actively involved. The first activity is a methodology for preparing design-basis documentation. The second is the identification of essential data required to be kept by the utility in support of the operation of a nuclear plant. The third activity is a computerized classification system of plant components, allowing ready identification of plant functional and physical characteristics. Plant configuration documentation describes plant components, the ways they arranged to interact, and the ways they are enabled to interact. Configuration management, on the other hand, is more than the control of such documentation. It is a dynamic process for ensuring that a plant configuration meets all relevant requirements for safety and economy, even while the configuration changes and even while the requirements change. Configuration management for a nuclear plant is so complex that it must be implemented in phases and modules. It takes advantage of and integrates existing programs. Managing complexity and streamlining the change process become important additional objectives of configuration management. The example activities fulfill essential goals of an overall CAM program: definition of design baseline, definition of essential plant data, and classification of plant components

Lessons Learned in Designing User-configurable Modular Robotics

DEFF Research Database (Denmark)

Lund, Henrik Hautop

2013-01-01

User-configurable robotics allows users to easily configure robotic systems to perform task-fulfilling behaviors as desired by the users. With a user configurable robotic system, the user can easily modify the physical and func-tional aspect in terms of hardware and software components of a robotic...... with the semi-autonomous com-ponents of the user-configurable robotic system in interaction with the given environment. Components constituting such a user-configurable robotic system can be characterized as modules in a modular robotic system. Several factors in the definition and implementation...

Configuration management plan for Machine Interface Test System (MITS)

International Nuclear Information System (INIS)

O'Neill, C.K.

1980-01-01

The discipline required by this plan will apply from the establishment of a configuration baseline until completion of the final test in the MITS. The plan applies to configured items of hardware and software as well as to the specifications and drawings for these items. The plan encompasses establishment of the facility baseline, interface definition, classes of change, change control, change paper, organizational responsibilities and relationships, test configuration (as opposed to facility), and configuration data retention

Configurational entropy and effective temperature in systems of active Brownian particles

NARCIS (Netherlands)

Preisler, Zdeněk; Dijkstra, Marjolein

2016-01-01

We propose a method to determine the effective density of states and configurational entropy in systems of active Brownian particles by measuring the probability distribution function of potential energy at varying temperatures. Assuming that the entropy is a continuous and monotonically increasing

Accelerator physics analysis with an integrated toolkit

International Nuclear Information System (INIS)

Holt, J.A.; Michelotti, L.; Satogata, T.

1992-08-01

Work is in progress on an integrated software toolkit for linear and nonlinear accelerator design, analysis, and simulation. As a first application, ''beamline'' and ''MXYZPTLK'' (differential algebra) class libraries, were used with an X Windows graphics library to build an user-friendly, interactive phase space tracker which, additionally, finds periodic orbits. This program was used to analyse a theoretical lattice which contains octupoles and decapoles to find the 20th order, stable and unstable periodic orbits and to explore the local phase space structure

A Comparative case study of remote area power supply systems using photovoltaic-battery vs thermoelectric-battery configuration

NARCIS (Netherlands)

Tan, Lippong; Date, Abhijit; Zhang, Bingjie; Singh, Baljit; Ganguly, Sayantan

The paper presents a comparative study of two types of remote area power supply (RAPS) systems, which are the existing photovoltaic-based (PV) configuration and the proposed thermoelectric-based (TE) configuration. Both RAPS systems are solar-based power generators and sized according to Melbourne

Configuration Database for BaBar On-line

International Nuclear Information System (INIS)

Salnikov, Andrei

2003-01-01

The configuration database is one of the vital systems in the BaBar on-line system. It provides services for the different parts of the data acquisition system and control system, which require run-time parameters. The original design and implementation of the configuration database played a significant role in the successful BaBar operations since the beginning of experiment. Recent additions to the design of the configuration database provide better means for the management of data and add new tools to simplify main configuration tasks. We describe the design of the configuration database, its implementation with the Objectivity/DB object-oriented database, and our experience collected during the years of operation

Risk-oriented management of system configurations during power plant operation

International Nuclear Information System (INIS)

Kafka, P.

1991-01-01

The paper explains the purpose, design, and functions of an on-line database called risk monitor, which is developed on the basis of a risk model mapping an entire plant and the functions of the system configurations by a probabilistic and risk-oriented approach in a computerized simulation model. The frequency of occurrence of the various failure modes is computed and specified by fault tree analysis and event tree analysis. The monitoring system is a diagnostic tool for power plant operators. (DG) [de

Configuration Analysis of Plug-in Hybrid Systems using Global Optimization

OpenAIRE

Kim, Insup; Kim, Hyunsup

2013-01-01

The purpose of the study is to analyze the configurations of Plug-in Hybrid Electric Vehicles (PHEV) with respect to fuel economy. Existing studies mostly focus on hybrid systems or few PHEV systems by only considering power split ratio and component efficiency. This paper adds original contribution to these literatures. First of all, this study compares and analyzes “series + α” PHEV – Input split, Series-output split and Series-parallel, which is consisted of a single Planetary gear or spur...

Photovoltaic power converter system with a controller configured to actively compensate load harmonics

Science.gov (United States)

de Rooij, Michael Andrew; Steigerwald, Robert Louis; Delgado, Eladio Clemente

2008-12-16

Photovoltaic power converter system including a controller configured to reduce load harmonics is provided. The system comprises a photovoltaic array and an inverter electrically coupled to the array to generate an output current for energizing a load connected to the inverter and to a mains grid supply voltage. The system further comprises a controller including a first circuit coupled to receive a load current to measure a harmonic current in the load current. The controller includes a second circuit to generate a fundamental reference drawn by the load. The controller further includes a third circuit for combining the measured harmonic current and the fundamental reference to generate a command output signal for generating the output current for energizing the load connected to the inverter. The photovoltaic system may be configured to compensate harmonic currents that may be drawn by the load.

The scheme and implementing of workstation configuration for medical imaging information system

International Nuclear Information System (INIS)

Tao Yonghao; Miao Jingtao

2002-01-01

Objective: To discuss the scheme and implementing for workstation configuration of medical imaging information system which would be adapted to the practice situation of China. Methods: The workstations were logically divided into PACS workstations and RIS workstations, the former applied to three kinds of diagnostic practice: the small matrix images, large matrix images, and high resolution gray scale display application, and the latter consisted of many different models which depended upon the usage and function process. Results: A dual screen configuration for image diagnostic workstation integrated the image viewing and reporting procedure physically, while the small matrix images as CT or MR were operated on 17 in (1 in = 2.54 cm) color monitors, the conventional X-ray diagnostic procedure was implemented based on 21 in color monitors or portrait format gray scale 2 K by 2.5 K monitors. All other RIS workstations not involved in image process were set up with a common PC configuration. Conclusion: The essential principle for designing a workstation scheme of medical imaging information system should satisfy the basic requirements of medical image diagnosis and fit into the available investment situation

PREDICTING THE CONFIGURATION OF A PLANETARY SYSTEM: KOI-152 OBSERVED BY KEPLER

International Nuclear Information System (INIS)

Wang Su; Ji Jianghui; Zhou Jilin

2012-01-01

The recent Kepler discovery of KOI-152 reveals a system of three hot super-Earth candidates that are in or near a 4:2:1 mean motion resonance. It is unlikely that they formed in situ; the planets probably underwent orbital migration during the formation and evolution process. The small semimajor axes of the three planets suggest that migration stopped at the inner edge of the primordial gas disk. In this paper, we focus on the influence of migration halting mechanisms, including migration 'dead zones', and inner truncation by the stellar magnetic field. We show that the stellar accretion rate, stellar magnetic field, and the speed of migration in the protoplanetary disk are the main factors affecting the final configuration of KOI-152. Our simulations suggest that three planets may be around a star with low star accretion rate or with high magnetic field. On the other hand, slow type I migration, which decreases to one-tenth of the linear analysis results, favors forming the configuration of KOI-152. Under such a formation scenario, the planets in the system are not massive enough to open gaps in the gas disk. The upper limits of the planetary masses are estimated to be about 15, 19, and 24 M ⊕ , respectively. Our results are also indicative of the near Laplacian configurations that are quite common in planetary systems.

A patient and public involvement (PPI) toolkit for meaningful and flexible involvement in clinical trials - a work in progress.

Science.gov (United States)

Bagley, Heather J; Short, Hannah; Harman, Nicola L; Hickey, Helen R; Gamble, Carrol L; Woolfall, Kerry; Young, Bridget; Williamson, Paula R

2016-01-01

Funders of research are increasingly requiring researchers to involve patients and the public in their research. Patient and public involvement (PPI) in research can potentially help researchers make sure that the design of their research is relevant, that it is participant friendly and ethically sound. Using and sharing PPI resources can benefit those involved in undertaking PPI, but existing PPI resources are not used consistently and this can lead to duplication of effort. This paper describes how we are developing a toolkit to support clinical trials teams in a clinical trials unit. The toolkit will provide a key 'off the shelf' resource to support trial teams with limited resources, in undertaking PPI. Key activities in further developing and maintaining the toolkit are to: ● listen to the views and experience of both research teams and patient and public contributors who use the tools; ● modify the tools based on our experience of using them; ● identify the need for future tools; ● update the toolkit based on any newly identified resources that come to light; ● raise awareness of the toolkit and ● work in collaboration with others to either develop or test out PPI resources in order to reduce duplication of work in PPI. Background Patient and public involvement (PPI) in research is increasingly a funder requirement due to the potential benefits in the design of relevant, participant friendly, ethically sound research. The use and sharing of resources can benefit PPI, but available resources are not consistently used leading to duplication of effort. This paper describes a developing toolkit to support clinical trials teams to undertake effective and meaningful PPI. Methods The first phase in developing the toolkit was to describe which PPI activities should be considered in the pathway of a clinical trial and at what stage these activities should take place. This pathway was informed through review of the type and timing of PPI activities within

Functional and Physical Configuration Audits of the Navy Tactical Command System-Afloat

National Research Council Canada - National Science Library

Brannin, Patricia

1996-01-01

We are providing this report for your information and use. This report is the fifth in a series of reports resulting from our audit of functional and physical configuration audits of Defense systems...

RISMC Toolkit and Methodology Research and Development Plan for External Hazards Analysis

Energy Technology Data Exchange (ETDEWEB)

Coleman, Justin Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-03-01

This report includes the description and development plan for a Risk Informed Safety Margins Characterization (RISMC) toolkit and methodology that will evaluate multihazard risk in an integrated manner to support the operating nuclear fleet.

RISMC Toolkit and Methodology Research and Development Plan for External Hazards Analysis

International Nuclear Information System (INIS)

Coleman, Justin Leigh

2016-01-01

This report includes the description and development plan for a Risk Informed Safety Margins Characterization (RISMC) toolkit and methodology that will evaluate multihazard risk in an integrated manner to support the operating nuclear fleet.

DUL Radio: A light-weight, wireless toolkit for sketching in hardware

DEFF Research Database (Denmark)

Brynskov, Martin; Lunding, Rasmus; Vestergaard, Lasse Steenbock

2011-01-01

-mobile prototyping where fast reaction is needed (e.g. in controlling sound). The target audiences include designers, students, artists etc. with minimal programming and hardware skills. This presentation covers our motivations for creating the toolkit, specifications, test results, comparison to related products...

Multi level configuration of ETO products

DEFF Research Database (Denmark)

Petersen, Thomas Ditlev; Jørgensen, Kaj Asbjørn; Hvolby, Hans-Henrik

2007-01-01

The paper introduces and defines central concepts related to multi level configuration and analyzes which challenges an engineer to order company must deal with to be able to realize a multi level configuration system. It is argued that high flexibility can be achieved and focus can be directed...... in certain business processes if a multi level configuration system is realized....

Project W-211, initial tank retrieval systems, retrieval control system software configuration management plan

International Nuclear Information System (INIS)

RIECK, C.A.

1999-01-01

This Software Configuration Management Plan (SCMP) provides the instructions for change control of the W-211 Project, Retrieval Control System (RCS) software after initial approval/release but prior to the transfer of custody to the waste tank operations contractor. This plan applies to the W-211 system software developed by the project, consisting of the computer human-machine interface (HMI) and programmable logic controller (PLC) software source and executable code, for production use by the waste tank operations contractor. The plan encompasses that portion of the W-211 RCS software represented on project-specific AUTOCAD drawings that are released as part of the C1 definitive design package (these drawings are identified on the drawing list associated with each C-1 package), and the associated software code. Implementation of the plan is required for formal acceptance testing and production release. The software configuration management plan does not apply to reports and data generated by the software except where specifically identified. Control of information produced by the software once it has been transferred for operation is the responsibility of the receiving organization

Using XML Configuration-Driven Development to Create a Customizable Ground Data System

Science.gov (United States)

Nash, Brent; DeMore, Martha

2009-01-01

The Mission data Processing and Control Subsystem (MPCS) is being developed as a multi-mission Ground Data System with the Mars Science Laboratory (MSL) as the first fully supported mission. MPCS is a fully featured, Java-based Ground Data System (GDS) for telecommand and telemetry processing based on Configuration-Driven Development (CDD). The eXtensible Markup Language (XML) is the ideal language for CDD because it is easily readable and editable by all levels of users and is also backed by a World Wide Web Consortium (W3C) standard and numerous powerful processing tools that make it uniquely flexible. The CDD approach adopted by MPCS minimizes changes to compiled code by using XML to create a series of configuration files that provide both coarse and fine grained control over all aspects of GDS operation.

Design Optimization Toolkit: Users' Manual

Energy Technology Data Exchange (ETDEWEB)

Aguilo Valentin, Miguel Alejandro [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Computational Solid Mechanics and Structural Dynamics

2014-07-01

The Design Optimization Toolkit (DOTk) is a stand-alone C++ software package intended to solve complex design optimization problems. DOTk software package provides a range of solution methods that are suited for gradient/nongradient-based optimization, large scale constrained optimization, and topology optimization. DOTk was design to have a flexible user interface to allow easy access to DOTk solution methods from external engineering software packages. This inherent flexibility makes DOTk barely intrusive to other engineering software packages. As part of this inherent flexibility, DOTk software package provides an easy-to-use MATLAB interface that enables users to call DOTk solution methods directly from the MATLAB command window.

Sierra Toolkit Manual Version 4.48.

Energy Technology Data Exchange (ETDEWEB)

Sierra Toolkit Team

2018-03-01

This report provides documentation for the SIERRA Toolkit (STK) modules. STK modules are intended to provide infrastructure that assists the development of computational engineering soft- ware such as finite-element analysis applications. STK includes modules for unstructured-mesh data structures, reading/writing mesh files, geometric proximity search, and various utilities. This document contains a chapter for each module, and each chapter contains overview descriptions and usage examples. Usage examples are primarily code listings which are generated from working test programs that are included in the STK code-base. A goal of this approach is to ensure that the usage examples will not fall out of date. This page intentionally left blank.

RAVE-a Detector-independent vertex reconstruction toolkit

Energy Technology Data Exchange (ETDEWEB)

Waltenberger, Wolfgang [Institute of High Energy Physics, Austrian Academy of Sciences A-1050 Vienna (Austria)], E-mail: walten@hephy.oeaw.ac.at; Mitaroff, Winfried; Moser, Fabian [Institute of High Energy Physics, Austrian Academy of Sciences A-1050 Vienna (Austria)

2007-10-21

A detector-independent toolkit for vertex reconstruction (RAVE) is being developed, along with a standalone framework (VERTIGO) for testing, analyzing and debugging. The core algorithms represent state of the art for geometric vertex finding and fitting by both linear (Kalman filter) and robust estimation methods. Main design goals are ease of use, flexibility for embedding into existing software frameworks, extensibility, and openness. The implementation is based on modern object-oriented techniques, is coded in C++ with interfaces for Java and Python, and follows an open-source approach. A beta release is available.

Tips from the toolkit: 1 - know yourself.

Science.gov (United States)

Steer, Neville

2010-01-01

High performance organisations review their strategy and business processes as part of usual business operations. If you are new to the field of general practice, do you have a career plan for the next 5-10 years? If you are an experienced general practitioner, are you using much the same business model and processes as when you started out? The following article sets out some ideas you might use to have a fresh approach to your professional career. It is based on The Royal Australian College of General Practitioners' 'General practice management toolkit'.

RAVE-a Detector-independent vertex reconstruction toolkit

International Nuclear Information System (INIS)

Waltenberger, Wolfgang; Mitaroff, Winfried; Moser, Fabian

2007-01-01

A detector-independent toolkit for vertex reconstruction (RAVE) is being developed, along with a standalone framework (VERTIGO) for testing, analyzing and debugging. The core algorithms represent state of the art for geometric vertex finding and fitting by both linear (Kalman filter) and robust estimation methods. Main design goals are ease of use, flexibility for embedding into existing software frameworks, extensibility, and openness. The implementation is based on modern object-oriented techniques, is coded in C++ with interfaces for Java and Python, and follows an open-source approach. A beta release is available

Software Configuration Management Plan for the K West Basin Integrated Water Treatment System (IWTS) - Project A.9

International Nuclear Information System (INIS)

GREEN, J.W.

2000-01-01

This document provides a configuration control plan for the software associated with the operation and control of the Integrated Water Treatment System (IWTS). It establishes requirements for ensuring configuration item identification, configuration control, configuration status accounting, defect reporting and resolution of computer software. It is written to comply with HNF-SD-SNF-CM-001, Spent Nuclear Fuel Configuration Management Plan (Forehand 1998) and HNF-PRO-309 Computer Software Quality Assurance Requirements, and applicable sections of administrative procedure CM-6-037-00, SNF Project Process Automation Software and Equipment

FATES: a flexible analysis toolkit for the exploration of single-particle mass spectrometer data

Science.gov (United States)

Sultana, Camille M.; Cornwell, Gavin C.; Rodriguez, Paul; Prather, Kimberly A.

2017-04-01

Single-particle mass spectrometer (SPMS) analysis of aerosols has become increasingly popular since its invention in the 1990s. Today many iterations of commercial and lab-built SPMSs are in use worldwide. However, supporting analysis toolkits for these powerful instruments are outdated, have limited functionality, or are versions that are not available to the scientific community at large. In an effort to advance this field and allow better communication and collaboration between scientists, we have developed FATES (Flexible Analysis Toolkit for the Exploration of SPMS data), a MATLAB toolkit easily extensible to an array of SPMS designs and data formats. FATES was developed to minimize the computational demands of working with large data sets while still allowing easy maintenance, modification, and utilization by novice programmers. FATES permits scientists to explore, without constraint, complex SPMS data with simple scripts in a language popular for scientific numerical analysis. In addition FATES contains an array of data visualization graphic user interfaces (GUIs) which can aid both novice and expert users in calibration of raw data; exploration of the dependence of mass spectral characteristics on size, time, and peak intensity; and investigations of clustered data sets.

Contingency factors in the configuration of information systems for continuous replenishment: a case study in Indonesia

NARCIS (Netherlands)

Nasution, R.A.; Nasution, R.A.; Stegwee, R.A.; de Bruijn, E.J.; Sadler, I.; Power, D.; Dapiran, G.P.

2002-01-01

Contingency theory provides a theoretical framework for analysing the implementation differences in the configuration of Information Systems for Continuous Replenishment in the retail sector. The configuration can be broken down into three arrangements: data processing and sharing arrangement,

Biomechanical ToolKit: Open-source framework to visualize and process biomechanical data.

Science.gov (United States)

Barre, Arnaud; Armand, Stéphane

2014-04-01

C3D file format is widely used in the biomechanical field by companies and laboratories to store motion capture systems data. However, few software packages can visualize and modify the integrality of the data in the C3D file. Our objective was to develop an open-source and multi-platform framework to read, write, modify and visualize data from any motion analysis systems using standard (C3D) and proprietary file formats (used by many companies producing motion capture systems). The Biomechanical ToolKit (BTK) was developed to provide cost-effective and efficient tools for the biomechanical community to easily deal with motion analysis data. A large panel of operations is available to read, modify and process data through C++ API, bindings for high-level languages (Matlab, Octave, and Python), and standalone application (Mokka). All these tools are open-source and cross-platform and run on all major operating systems (Windows, Linux, MacOS X). Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Modeling of a Flooding Induced Station Blackout for a Pressurized Water Reactor Using the RISMC Toolkit

Energy Technology Data Exchange (ETDEWEB)

Mandelli, Diego; Prescott, Steven R; Smith, Curtis L; Alfonsi, Andrea; Rabiti, Cristian; Cogliati, Joshua J; Kinoshita, Robert A

2011-07-01

In the Risk Informed Safety Margin Characterization (RISMC) approach we want to understand not just the frequency of an event like core damage, but how close we are (or are not) to key safety-related events and how might we increase our safety margins. The RISMC Pathway uses the probabilistic margin approach to quantify impacts to reliability and safety by coupling both probabilistic (via stochastic simulation) and mechanistic (via physics models) approaches. This coupling takes place through the interchange of physical parameters and operational or accident scenarios. In this paper we apply the RISMC approach to evaluate the impact of a power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., system activation) and to perform statistical analyses (e.g., run multiple RELAP-7 simulations where sequencing/timing of events have been changed according to a set of stochastic distributions). By using the RISMC toolkit, we can evaluate how power uprate affects the system recovery measures needed to avoid core damage after the PWR lost all available AC power by a tsunami induced flooding. The simulation of the actual flooding is performed by using a smooth particle hydrodynamics code: NEUTRINO.

Study on optimal configuration of the grid-connected wind-solar-battery hybrid power system

Science.gov (United States)

Ma, Gang; Xu, Guchao; Ju, Rong; Wu, Tiantian

2017-08-01

The capacity allocation of each energy unit in the grid-connected wind-solar-battery hybrid power system is a significant segment in system design. In this paper, taking power grid dispatching into account, the research priorities are as follows: (1) We establish the mathematic models of each energy unit in the hybrid power system. (2) Based on dispatching of the power grid, energy surplus rate, system energy volatility and total cost, we establish the evaluation system for the wind-solar-battery power system and use a number of different devices as the constraint condition. (3) Based on an improved Genetic algorithm, we put forward a multi-objective optimisation algorithm to solve the optimal configuration problem in the hybrid power system, so we can achieve the high efficiency and economy of the grid-connected hybrid power system. The simulation result shows that the grid-connected wind-solar-battery hybrid power system has a higher comprehensive performance; the method of optimal configuration in this paper is useful and reasonable.

Software configuration management plan, 241-AY and 241-AZ tank farm MICON automation system

International Nuclear Information System (INIS)

Hill, L.F.

1997-01-01

This document establishes a Computer Software Configuration Management Plan (CSCM) for controlling software for the MICON Distributed Control System (DCS) located at the 241-AY and 241-AZ Aging Waste Tank Farm facilities in the 200 East Area. The MICON DCS software controls and monitors the instrumentation and equipment associated with plant systems and processes. A CSCM identifies and defines the configuration items in a system (section 3.1), controls the release and change of these items throughout the system life cycle (section 3.2), records and reports the status of configuration items and change requests (section 3.3), and verifies the completeness and correctness of the items (section 3.4). All software development before initial release, or before software is baselined, is considered developmental. This plan does not apply to developmental software. This plan applies to software that has been baselined and released. The MICON software will monitor and control the related instrumentation and equipment of the 241-AY and 241-AZ Tank Farm ventilation systems. Eventually, this software may also assume the monitoring and control of the tank sludge washing equipment and other systems as they are brought on line. This plan applies to the System Cognizant Manager and MICON Cognizant Engineer (who is also referred to herein as the system administrator) responsible for the software/hardware and administration of the MICON system. This document also applies to any other organizations within Tank Farms which are currently active on the system including system cognizant engineers, nuclear operators, technicians, and control room supervisors

TWRS authorization basis configuration control summary

International Nuclear Information System (INIS)

Mendoza, D.P.

1997-01-01

This document was developed to define the Authorization Basis management functional requirements for configuration control, to evaluate the management control systems currently in place, and identify any additional controls that may be required until the TWRS [Tank Waste Remediation System] Configuration Management system is fully in place

The PRIDE (Partnership to Improve Diabetes Education) Toolkit: Development and Evaluation of Novel Literacy and Culturally Sensitive Diabetes Education Materials.

Science.gov (United States)

Wolff, Kathleen; Chambers, Laura; Bumol, Stefan; White, Richard O; Gregory, Becky Pratt; Davis, Dianne; Rothman, Russell L

2016-02-01

Patients with low literacy, low numeracy, and/or linguistic needs can experience challenges understanding diabetes information and applying concepts to their self-management. The authors designed a toolkit of education materials that are sensitive to patients' literacy and numeracy levels, language preferences, and cultural norms and that encourage shared goal setting to improve diabetes self-management and health outcomes. The Partnership to Improve Diabetes Education (PRIDE) toolkit was developed to facilitate diabetes self-management education and support. The PRIDE toolkit includes a comprehensive set of 30 interactive education modules in English and Spanish to support diabetes self-management activities. The toolkit builds upon the authors' previously validated Diabetes Literacy and Numeracy Education Toolkit (DLNET) by adding a focus on shared goal setting, addressing the needs of Spanish-speaking patients, and including a broader range of diabetes management topics. Each PRIDE module was evaluated using the Suitability Assessment of Materials (SAM) instrument to determine the material's cultural appropriateness and its sensitivity to the needs of patients with low literacy and low numeracy. Reading grade level was also assessed using the Automated Readability Index (ARI), Coleman-Liau, Flesch-Kincaid, Fry, and SMOG formulas. The average reading grade level of the materials was 5.3 (SD 1.0), with a mean SAM of 91.2 (SD 5.4). All of the 30 modules received a "superior" score (SAM >70%) when evaluated by 2 independent raters. The PRIDE toolkit modules can be used by all members of a multidisciplinary team to assist patients with low literacy and low numeracy in managing their diabetes. © 2015 The Author(s).

A universal postprocessing toolkit for accelerator simulation and data analysis

International Nuclear Information System (INIS)

Borland, M.

1998-01-01

The Self-Describing Data Sets (SDDS) toolkit comprises about 70 generally-applicable programs sharing a common data protocol. At the Advanced Photon Source (APS), SDDS performs the vast majority of operational data collection and processing, most data display functions, and many control functions. In addition, a number of accelerator simulation codes use SDDS for all post-processing and data display. This has three principle advantages: first, simulation codes need not provide customized post-processing tools, thus simplifying development and maintenance. Second, users can enhance code capabilities without changing the code itself, by adding SDDS-based pre- and post-processing. Third, multiple codes can be used together more easily, by employing SDDS for data transfer and adaptation. Given its broad applicability, the SDDS file protocol is surprisingly simple, making it quite easy for simulations to generate SDDS-compliant data. This paper discusses the philosophy behind SDDS, contrasting it with some recent trends, and outlines the capabilities of the toolkit. The paper also gives examples of using SDDS for accelerator simulation

Water Security Toolkit User Manual Version 1.2.

Energy Technology Data Exchange (ETDEWEB)

Klise, Katherine A.; Siirola, John Daniel; Hart, David; Hart, William Eugene; Phillips, Cynthia Ann; Haxton, Terranna; Murray, Regan; Janke, Robert; Taxon, Thomas; Laird, Carl; Seth, Arpan; Hackebeil, Gabriel; McGee, Shawn; Mann, Angelica

2014-08-01

The Water Security Toolkit (WST) is a suite of open source software tools that can be used by water utilities to create response strategies to reduce the impact of contamination in a water distribution network . WST includes hydraulic and water quality modeling software , optimizati on methodologies , and visualization tools to identify: (1) sensor locations to detect contamination, (2) locations in the network in which the contamination was introduced, (3) hydrants to remove contaminated water from the distribution system, (4) locations in the network to inject decontamination agents to inactivate, remove, or destroy contaminants, (5) locations in the network to take grab sample s to help identify the source of contamination and (6) valves to close in order to isolate contaminate d areas of the network. This user manual describes the different components of WST , along w ith examples and case studies. License Notice The Water Security Toolkit (WST) v.1.2 Copyright c 2012 Sandia Corporation. Under the terms of Contract DE-AC04-94AL85000, there is a non-exclusive license for use of this work by or on behalf of the U.S. government. This software is distributed under the Revised BSD License (see below). In addition, WST leverages a variety of third-party software packages, which have separate licensing policies: Acro Revised BSD License argparse Python Software Foundation License Boost Boost Software License Coopr Revised BSD License Coverage BSD License Distribute Python Software Foundation License / Zope Public License EPANET Public Domain EPANET-ERD Revised BSD License EPANET-MSX GNU Lesser General Public License (LGPL) v.3 gcovr Revised BSD License GRASP AT&T Commercial License for noncommercial use; includes randomsample and sideconstraints executable files LZMA SDK Public Domain nose GNU Lesser General Public License (LGPL) v.2.1 ordereddict MIT License pip MIT License PLY BSD License PyEPANET Revised BSD License Pyro MIT License PyUtilib Revised BSD License Py

TU-F-17A-01: BEST IN PHYSICS (JOINT IMAGING-THERAPY) - An Automatic Toolkit for Efficient and Robust Analysis of 4D Respiratory Motion

International Nuclear Information System (INIS)

Wei, J; Yuan, A; Li, G

2014-01-01

Purpose: To provide an automatic image analysis toolkit to process thoracic 4-dimensional computed tomography (4DCT) and extract patient-specific motion information to facilitate investigational or clinical use of 4DCT. Methods: We developed an automatic toolkit in MATLAB to overcome the extra workload from the time dimension in 4DCT. This toolkit employs image/signal processing, computer vision, and machine learning methods to visualize, segment, register, and characterize lung 4DCT automatically or interactively. A fully-automated 3D lung segmentation algorithm was designed and 4D lung segmentation was achieved in batch mode. Voxel counting was used to calculate volume variations of the torso, lung and its air component, and local volume changes at the diaphragm and chest wall to characterize breathing pattern. Segmented lung volumes in 12 patients are compared with those from a treatment planning system (TPS). Voxel conversion was introduced from CT# to other physical parameters, such as gravity-induced pressure, to create a secondary 4D image. A demon algorithm was applied in deformable image registration and motion trajectories were extracted automatically. Calculated motion parameters were plotted with various templates. Machine learning algorithms, such as Naive Bayes and random forests, were implemented to study respiratory motion. This toolkit is complementary to and will be integrated with the Computational Environment for Radiotherapy Research (CERR). Results: The automatic 4D image/data processing toolkit provides a platform for analysis of 4D images and datasets. It processes 4D data automatically in batch mode and provides interactive visual verification for manual adjustments. The discrepancy in lung volume calculation between this and the TPS is <±2% and the time saving is by 1–2 orders of magnitude. Conclusion: A framework of 4D toolkit has been developed to analyze thoracic 4DCT automatically or interactively, facilitating both investigational

TU-F-17A-01: BEST IN PHYSICS (JOINT IMAGING-THERAPY) - An Automatic Toolkit for Efficient and Robust Analysis of 4D Respiratory Motion

Energy Technology Data Exchange (ETDEWEB)

Wei, J [City College of New York, New York, NY (United States); Yuan, A; Li, G [Memorial Sloan Kettering Cancer Center, New York, NY (United States)

2014-06-15

Purpose: To provide an automatic image analysis toolkit to process thoracic 4-dimensional computed tomography (4DCT) and extract patient-specific motion information to facilitate investigational or clinical use of 4DCT. Methods: We developed an automatic toolkit in MATLAB to overcome the extra workload from the time dimension in 4DCT. This toolkit employs image/signal processing, computer vision, and machine learning methods to visualize, segment, register, and characterize lung 4DCT automatically or interactively. A fully-automated 3D lung segmentation algorithm was designed and 4D lung segmentation was achieved in batch mode. Voxel counting was used to calculate volume variations of the torso, lung and its air component, and local volume changes at the diaphragm and chest wall to characterize breathing pattern. Segmented lung volumes in 12 patients are compared with those from a treatment planning system (TPS). Voxel conversion was introduced from CT# to other physical parameters, such as gravity-induced pressure, to create a secondary 4D image. A demon algorithm was applied in deformable image registration and motion trajectories were extracted automatically. Calculated motion parameters were plotted with various templates. Machine learning algorithms, such as Naive Bayes and random forests, were implemented to study respiratory motion. This toolkit is complementary to and will be integrated with the Computational Environment for Radiotherapy Research (CERR). Results: The automatic 4D image/data processing toolkit provides a platform for analysis of 4D images and datasets. It processes 4D data automatically in batch mode and provides interactive visual verification for manual adjustments. The discrepancy in lung volume calculation between this and the TPS is <±2% and the time saving is by 1–2 orders of magnitude. Conclusion: A framework of 4D toolkit has been developed to analyze thoracic 4DCT automatically or interactively, facilitating both investigational

Water Security Toolkit User Manual: Version 1.3 | Science ...

Science.gov (United States)

User manual: Data Product/Software The Water Security Toolkit (WST) is a suite of tools that help provide the information necessary to make good decisions resulting in the minimization of further human exposure to contaminants, and the maximization of the effectiveness of intervention strategies. WST assists in the evaluation of multiple response actions in order to select the most beneficial consequence management strategy. It includes hydraulic and water quality modeling software and optimization methodologies to identify: (1) sensor locations to detect contamination, (2) locations in the network in which the contamination was introduced, (3) hydrants to remove contaminated water from the distribution system, (4) locations in the network to inject decontamination agents to inactivate, remove or destroy contaminants, (5) locations in the network to take grab sample to confirm contamination or cleanup and (6) valves to close in order to isolate contaminated areas of the network.

EMIR: a configurable hierarchical system for event monitoring and incident response

Science.gov (United States)

Deich, William T. S.

2014-07-01

The Event Monitor and Incident Response system (emir) is a flexible, general-purpose system for monitoring and responding to all aspects of instrument, telescope, and general facility operations, and has been in use at the Automated Planet Finder telescope for two years. Responses to problems can include both passive actions (e.g. generating alerts) and active actions (e.g. modifying system settings). Emir includes a monitor-and-response daemon, plus graphical user interfaces and text-based clients that automatically configure themselves from data supplied at runtime by the daemon. The daemon is driven by a configuration file that describes each condition to be monitored, the actions to take when the condition is triggered, and how the conditions are aggregated into hierarchical groups of conditions. Emir has been implemented for the Keck Task Library (KTL) keyword-based systems used at Keck and Lick Observatories, but can be readily adapted to many event-driven architectures. This paper discusses the design and implementation of Emir , and the challenges in balancing the competing demands for simplicity, flexibility, power, and extensibility. Emir 's design lends itself well to multiple purposes, and in addition to its core monitor and response functions, it provides an effective framework for computing running statistics, aggregate values, and summary state values from the primitive state data generated by other subsystems, and even for creating quick-and-dirty control loops for simple systems.

Optimal and Modular Configuration of Wind Integrated Hybrid Power Plants for Off-Grid Systems

DEFF Research Database (Denmark)

Petersen, Lennart; Iov, Florin; Tarnowski, German Claudio

2018-01-01

This paper focusses on the system configuration of offgrid hybrid power plants including wind power generation. First, a modular and scalable system topology is proposed. Secondly, an optimal sizing algorithm is developed in order to determine the installed capacities of wind turbines, PV system......, battery energy storage system and generator sets. The novelty of this work lies in a robust sizing algorithm with respect to the required resolution of resource data in order to account for intra-hour power variations. Moreover, the involvement of the electrical infrastructure enables a precise estimation...... of power losses within the hybrid power plant as well as the consideration of both active and reactive power load demand for optimally sizing the plant components. The main outcome of this study is a methodology to determine feasible system configurations of modular and scalable wind integrated hybrid...

BENCHMARKING AND CONFIGURATION OF OPENSOURCE MANUFACTURING EXECUTION SYSTEM (MES APPLICATION

Directory of Open Access Journals (Sweden)

Ganesha Nur Laksmana

2013-05-01

Full Text Available Information now is an important element to every growing industry in the world. Inorder to keep up with other competitors, endless improvements in optimizing overall efficiency areneeded. There still exist barriers that separate departments in PT. XYZ and cause limitation to theinformation sharing in the system. Open-Source Manufacturing Execution System (MES presentsas an IT-based application that offers wide variety of customization to eliminate stovepipes bysharing information between departments. Benchmarking is used to choose the best Open-SourceMES Application; and Dynamic System Development Method (DSDM is adopted as this workguideline. As a result, recommendations of the chosen Open-Source MES Application arerepresented.Keywords: Manufacturing Execution System (MES; Open Source; Dynamic SystemDevelopment Method (DSDM; Benchmarking; Configuration

Making Schools the Model for Healthier Environments Toolkit: What It Is

Science.gov (United States)

Robert Wood Johnson Foundation, 2012

2012-01-01

Healthy students perform better. Poor nutrition and inadequate physical activity can affect not only academic achievement, but also other factors such as absenteeism, classroom behavior, ability to concentrate, self-esteem, cognitive performance, and test scores. This toolkit provides information to help make schools the model for healthier…

Falling Less in Kansas: Development of a Fall Risk Reduction Toolkit

Directory of Open Access Journals (Sweden)

Teresa S. Radebaugh

2011-01-01

Full Text Available Falls are a serious health risk for older adults. But for those living in rural and frontier areas of the USA, the risks are higher because of limited access to health care providers and resources. This study employed a community-based participatory research approach to develop a fall prevention toolkit to be used by residents of rural and frontier areas without the assistance of health care providers. Qualitative data were gathered from both key informant interviews and focus groups with a broad range of participants. Data analysis revealed that to be effective and accepted, the toolkit should be not only evidence based but also practical, low-cost, self-explanatory, and usable without the assistance of a health care provider. Materials must be engaging, visually interesting, empowering, sensitive to reading level, and appropriate for low-vision users. These findings should be useful to other researchers developing education and awareness materials for older adults in rural areas.

Design of a flight director/configuration management system for piloted STOL approaches

Science.gov (United States)

Hoh, R. H.; Klein, R. H.; Johnson, W. A.

1973-01-01

The design and characteristics of a flight director for V/STOL aircraft are discussed. A configuration management system for piloted STOL approaches is described. The individual components of the overall system designed to reduce pilot workload to an acceptable level during curved, decelerating, and descending STOL approaches are defined. The application of the system to augmentor wing aircraft is analyzed. System performance checks and piloted evaluations were conducted on a flight simulator and the results are summarized.

A Software Toolkit to Study Systematic Uncertainties of the Physics Models of the Geant4 Simulation Package

CERN Document Server

Genser, Krzysztof; Perdue, Gabriel; Wenzel, Hans; Yarba, Julia; Kelsey, Michael; Wright, Dennis H

2016-01-01

The Geant4 toolkit is used to model interactions between particles and matter. Geant4 employs a set of validated physics models that span a wide range of interaction energies. These models are tuned to cover a large variety of possible applications. This raises the critical question of what uncertainties are associated with the Geant4 physics model, or group of models, involved in a simulation project. To address the challenge, we have designed and implemented a comprehen- sive, modular, user-friendly software toolkit that allows the variation of one or more parameters of one or more Geant4 physics models involved in simulation studies. It also enables analysis of multiple variants of the resulting physics observables of interest in order to estimate the uncertain- ties associated with the simulation model choices. Key functionalities of the toolkit are presented in this paper and are illustrated with selected results.

Evolution of the Configuration Database Design

International Nuclear Information System (INIS)

Salnikov, A.

2006-01-01

The BABAR experiment at SLAC successfully collects physics data since 1999. One of the major parts of its on-line system is the configuration database which provides other parts of the system with the configuration data necessary for data taking. Originally the configuration database was implemented in the Objectivity/DB ODBMS. Recently BABAR performed a successful migration of its event store from Objectivity/DB to ROOT and this prompted a complete phase-out of the Objectivity/DB in all other BABAR databases. It required the complete redesign of the configuration database to hide any implementation details and to support multiple storage technologies. In this paper we describe the process of the migration of the configuration database, its new design, implementation strategy and details

VaST: A variability search toolkit

Science.gov (United States)

Sokolovsky, K. V.; Lebedev, A. A.

2018-01-01

Variability Search Toolkit (VaST) is a software package designed to find variable objects in a series of sky images. It can be run from a script or interactively using its graphical interface. VaST relies on source list matching as opposed to image subtraction. SExtractor is used to generate source lists and perform aperture or PSF-fitting photometry (with PSFEx). Variability indices that characterize scatter and smoothness of a lightcurve are computed for all objects. Candidate variables are identified as objects having high variability index values compared to other objects of similar brightness. The two distinguishing features of VaST are its ability to perform accurate aperture photometry of images obtained with non-linear detectors and handle complex image distortions. The software has been successfully applied to images obtained with telescopes ranging from 0.08 to 2.5 m in diameter equipped with a variety of detectors including CCD, CMOS, MIC and photographic plates. About 1800 variable stars have been discovered with VaST. It is used as a transient detection engine in the New Milky Way (NMW) nova patrol. The code is written in C and can be easily compiled on the majority of UNIX-like systems. VaST is free software available at http://scan.sai.msu.ru/vast/.

From toolkit to framework: The past and future evolution of PhEDEx

Energy Technology Data Exchange (ETDEWEB)

Sanchez-Hernandez, A. [CINVESTAV, IPN; Egeland, R. [Argosy U., Eagan; Huang, C. H. [Fermilab; Ratnikova, N. [Moscow, ITEP; Magini, N. [CERN; Wildish, T. [Princeton U.

2012-01-01

PhEDEx is the data-movement solution for CMS at the LHC. Created in 2004, it is now one of the longest-lived components of the CMS dataflow/workflow world. As such, it has undergone significant evolution over time, and continues to evolve today, despite being a fully mature system. Originally a toolkit of agents and utilities dedicated to specific tasks, it is becoming a more open framework that can be used in several ways, both within and beyond its original problem domain. In this talk we describe how a combination of refactoring and adoption of new technologies that have become available over the years have made PhEDEx more flexible, maintainable, and scaleable.

Methodology for the development of a taxonomy and toolkit to evaluate health-related habits and lifestyle (eVITAL

Directory of Open Access Journals (Sweden)

Walsh Carolyn O

2010-03-01

Full Text Available Abstract Background Chronic diseases cause an ever-increasing percentage of morbidity and mortality, but many have modifiable risk factors. Many behaviors that predispose or protect an individual to chronic disease are interrelated, and therefore are best approached using an integrated model of health and the longevity paradigm, using years lived without disability as the endpoint. Findings This study used a 4-phase mixed qualitative design to create a taxonomy and related online toolkit for the evaluation of health-related habits. Core members of a working group conducted a literature review and created a framing document that defined relevant constructs. This document was revised, first by a working group and then by a series of multidisciplinary expert groups. The working group and expert panels also designed a systematic evaluation of health behaviors and risks, which was computerized and evaluated for feasibility. A demonstration study of the toolkit was performed in 11 healthy volunteers. Discussion In this protocol, we used forms of the community intelligence approach, including frame analysis, feasibility, and demonstration, to develop a clinical taxonomy and an online toolkit with standardized procedures for screening and evaluation of multiple domains of health, with a focus on longevity and the goal of integrating the toolkit into routine clinical practice. Trial Registration IMSERSO registry 200700012672

Quantifying Configuration-Sampling Error in Langevin Simulations of Complex Molecular Systems

Directory of Open Access Journals (Sweden)

Josh Fass

2018-04-01

Full Text Available While Langevin integrators are popular in the study of equilibrium properties of complex systems, it is challenging to estimate the timestep-induced discretization error: the degree to which the sampled phase-space or configuration-space probability density departs from the desired target density due to the use of a finite integration timestep. Sivak et al., introduced a convenient approach to approximating a natural measure of error between the sampled density and the target equilibrium density, the Kullback-Leibler (KL divergence, in phase space, but did not specifically address the issue of configuration-space properties, which are much more commonly of interest in molecular simulations. Here, we introduce a variant of this near-equilibrium estimator capable of measuring the error in the configuration-space marginal density, validating it against a complex but exact nested Monte Carlo estimator to show that it reproduces the KL divergence with high fidelity. To illustrate its utility, we employ this new near-equilibrium estimator to assess a claim that a recently proposed Langevin integrator introduces extremely small configuration-space density errors up to the stability limit at no extra computational expense. Finally, we show how this approach to quantifying sampling bias can be applied to a wide variety of stochastic integrators by following a straightforward procedure to compute the appropriate shadow work, and describe how it can be extended to quantify the error in arbitrary marginal or conditional distributions of interest.

An evaluation capacity building toolkit for principal investigators of undergraduate research experiences: A demonstration of transforming theory into practice.

Science.gov (United States)

Rorrer, Audrey S

2016-04-01

This paper describes the approach and process undertaken to develop evaluation capacity among the leaders of a federally funded undergraduate research program. An evaluation toolkit was developed for Computer and Information Sciences and Engineering(1) Research Experiences for Undergraduates(2) (CISE REU) programs to address the ongoing need for evaluation capacity among principal investigators who manage program evaluation. The toolkit was the result of collaboration within the CISE REU community with the purpose being to provide targeted instructional resources and tools for quality program evaluation. Challenges were to balance the desire for standardized assessment with the responsibility to account for individual program contexts. Toolkit contents included instructional materials about evaluation practice, a standardized applicant management tool, and a modulated outcomes measure. Resulting benefits from toolkit deployment were having cost effective, sustainable evaluation tools, a community evaluation forum, and aggregate measurement of key program outcomes for the national program. Lessons learned included the imperative of understanding the evaluation context, engaging stakeholders, and building stakeholder trust. Results from project measures are presented along with a discussion of guidelines for facilitating evaluation capacity building that will serve a variety of contexts. Copyright © 2016. Published by Elsevier Ltd.

Six-quark configurations in the NN system correlated with experiment

International Nuclear Information System (INIS)

Gorovoy, V.S.; Obukhovskij, I.T.

1996-01-01

The nucleon-nucleon interaction at short range is analyzed in terms of six-quark configuration. It is shown that in low partial waves L = 0, 1 system has a two-channel character: the N N channel and the inner six-quark state (bag) with specific color-spin structure. It is shown that polarization observables could be a good tool for investigation of a quark structure of the deuteron [ru

AZ-101 Mixer Pump Demonstration Data Acquisition System and Gamma Cart Data Acquisition Control System Software Configuration Management Plan

International Nuclear Information System (INIS)

WHITE, D.A.

1999-01-01

This Software Configuration Management Plan (SCMP) provides the instructions for change control of the AZ1101 Mixer Pump Demonstration Data Acquisition System (DAS) and the Sludge Mobilization Cart (Gamma Cart) Data Acquisition and Control System (DACS)