29 CFR Appendix III to Part 1918 - The Mechanics of Conventional Cargo Gear (Non-mandatory)

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false The Mechanics of Conventional Cargo Gear (Non-mandatory.... 1918, App. III Appendix III to Part 1918—The Mechanics of Conventional Cargo Gear (Non-mandatory) Note: This appendix is non-mandatory and provides an explanation of the mechanics in the correct spotting of...

Luminescence studies of Sm(III) and Cm(III) complexes in NaSCN/DHDECMP extraction systems

CERN Document Server

Chung, D Y; Kimura, T

1999-01-01

Laser-induced fluorescence (LIF) studies of Sm(III) and Cm(III) complexes in the NaSCN/DHDECMP solvent extraction system were carried out. Luminescence lifetimes were measured to determine the number of water molecules coordinated to Sm(III), Tb(III), Dy(III), and Cm(III) in the sodium thiocyanate solution and in the DHDECMP phase. The hydration number of Sm(III), Tb(III), Dy(III), and Cm(III) in the sodium thiocyanate solution decreased linearly with increasing sodium thiocyanate concentration. The hydration numbers of Sm(III), Dy(III), and Cm(III) in the DHDECMP phase decreased with increasing sodium thiocyanate concentration. The water molecules in the inner coordination sphere of Sm(III) and Dy(III) extracted into the DHDECMP were not completely removed at low sodium thiocyanate concentration but decreased with increasing sodium thiocyanate concentration. However, in the case of Cm(III) extracted into the DHDECMP phase from the sodium thiocyanate solution, there was no water in the inner coordination sphe...

International Working Group on Past Reactors Thirteenth Annual Meeting. Summary Report. Part III

International Nuclear Information System (INIS)

1981-04-01

The Thirteenth Annual Meeting of the IAEA International Working Group on Fast Reactors was held at the IAEA Headquarters, Vienna, Austria from 9 to 11 April 1980. The Summary Report (Part I) contains the Minutes of the Meeting. The Summary Report (Part II) contains the papers which review the national programme in the field of LMFBRs and other presentations at the Meeting. The Summary Report (Part III) contains the discussions on the review of the national programmes

The SINTRAN III NODAL system

International Nuclear Information System (INIS)

Skaali, T.B.

1980-10-01

NODAL is a high level programming language based on FOCAL and SNOBOL4, with some influence from BASIC. The language was developed to operate on the computer network controlling the SPS accelerator at CERN. NODAL is an interpretive language designed for interactive use. This is the most important aspect of the language, and is reflected in its structure. The interactive facilities make it possible to write, debug and modify programs much faster than with compiler based languages like FORTRAN and ALGOL. Apart from a few minor modifications, the basic part of the Oslo University NODAL system does not differ from the CERN version. However, the Oslo University implementation has been expanded with new functions which enable the user to execute many of the SINTRAN III monitor calls from the NODAL level. In particular the most important RT monitor calls have been implemented in this way, a property which renders possible the use of NODAL as a RT program administrator. (JIW)

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

The Systemic Theory of Living Systems and Relevance to CAM: the Theory (Part III

Directory of Open Access Journals (Sweden)

José A. Olalde Rangel

2005-01-01

Full Text Available Western medical science lacks a solid philosophical and theoretical approach to disease cognition and therapeutics. My first two articles provided a framework for a humane medicine based on Modern Biophysics. Its precepts encompass modern therapeutics and CAM. Modern Biophysics and its concepts are presently missing in medicine, whether orthodox or CAM, albeit they probably provide the long sought explanation that bridges the abyss between East and West. Key points that differentiate Systemic from other systems' approaches are ‘Intelligence’, ‘Energy’ and the objective ‘to survive’. The General System Theory (GST took a forward step by proposing a departure from the mechanistic biological concept—of analyzing parts and processes in isolation—and brought us towards an organismic model. GST examines the system's components and results of their interaction. However, GST still does not go far enough. GST assumes ‘Self-Organization’ as a spontaneous phenomenon, ignoring a causative entity or central controller to all systems: Intelligence. It also neglects ‘Survive’ as the directional motivation common to any living system, and scarcely assigns ‘Energy’ its true inherent value. These three parameters, Intelligence, Energy and Survive, are vital variables to be considered, in our human quest, if we are to achieve a unified theory of life.

Burnout in boiling heat transfer. Part III. High-quality forced-convection systems

International Nuclear Information System (INIS)

Bergles, A.E.

1979-01-01

This is the final part of a review of burnout during boiling heat transfer. The status of burnout in high-quality forced-convection systems is reviewed, and recent developments are summarized in detail. A general guide to the considerable literature is given. Parametric effects and correlations for water in circular and noncircular ducts are presented. Other topics discussed include transients, steam-generator applications, correlations for other fluids, fouling, and augmentation

Morphology of interior interfaces in dilute nitride III/V material systems; Morphologie innerer Grenzflaechen in verduennt stickstoffhaltigen III/V-Materialsystemen

Energy Technology Data Exchange (ETDEWEB)

Oberhoff, S.

2007-12-03

This study aims to clarify structure formation processes in dilute N-containing III/V-based material systems, using highly selective etching methods and subsequent atomic force microscopy (AFM) to expose and analyse interior interfaces. In the first part of this study it was directly proved for the first time that adding Sb during growth interruption inhibits the GI-induced structural phase transition and reduces the diffusivity on GaAs and (GaIn)(NAs) surfaces. However, applying Sb during GI does not affect the driving force of the structural phase transition. Therefore a fundamental analysis about the incorporation of Sb into GaAs, Ga(NAs) and (GaIn)(NAs) was carried out in the second part of the study. Using a combination of high resolution X-ray diffraction, transmission electron microscopy and SIMS measurements, it was verified that incorporating Sb into (GaIn)(NAs) causes an increase of the In content and a decrease of the N content. In the third part of the study, novel etching methods for the GaP-based material system Ga(NAsP) are introduced which provide the opportunity to analyse structure formation processes on interior interfaces in this material system by AFM. (orig.)

Interaction of Eu(III) and Cm(III) with mucin. A key component of the human mucosa

International Nuclear Information System (INIS)

Wilke, Claudia; Barkleit, Astrid

2017-01-01

To evaluate the potential health risks caused by the ingestion of lanthanides (Ln) and actinides (An), investigations into the chemical behavior of these metals in the human gastrointestinal tract are necessary. Mucin is an important part of the protective mucosa layer in the digestive system. We have recently reported that mucin interacts strongly with Eu(III) and Cm(III), representatives of Ln(III) and An(III), respectively, under in vivo conditions. In order to investigate the complexation behavior of this protein with Ln(III)/An(III), TRLFS measurements were performed on Eu(III)/Cm(III)-mucin solutions with different protein concentrations and at different pH. The results indicate the formation of at least two independent mucin species. At higher pH, the formation of hydroxide species was also observed.

Interaction of Eu(III) and Cm(III) with mucin. A key component of the human mucosa

Energy Technology Data Exchange (ETDEWEB)

Wilke, Claudia; Barkleit, Astrid [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Chemistry of the F-Elements

2017-06-01

To evaluate the potential health risks caused by the ingestion of lanthanides (Ln) and actinides (An), investigations into the chemical behavior of these metals in the human gastrointestinal tract are necessary. Mucin is an important part of the protective mucosa layer in the digestive system. We have recently reported that mucin interacts strongly with Eu(III) and Cm(III), representatives of Ln(III) and An(III), respectively, under in vivo conditions. In order to investigate the complexation behavior of this protein with Ln(III)/An(III), TRLFS measurements were performed on Eu(III)/Cm(III)-mucin solutions with different protein concentrations and at different pH. The results indicate the formation of at least two independent mucin species. At higher pH, the formation of hydroxide species was also observed.

Neuroscience in Nazi Europe Part III: victims of the Third Reich.

Science.gov (United States)

Zeidman, Lawrence A; Kondziella, Daniel

2012-11-01

In Part I, neuroscience collaborators with the Nazis were discussed, and in Part II, neuroscience resistors were discussed. In Part III, we discuss the tragedy regarding european neuroscientists who became victims of the Nazi onslaught on “non-Aryan” doctors. Some of these unfortunate neuroscientists survived Nazi concentration camps, but most were murdered. We discuss the circumstances and environment which stripped these neuroscientists of their profession, then of their personal rights and freedom, and then of their lives. We include a background analysis of anti-Semitism and Nazism in their various countries, then discuss in depth seven exemplary neuroscientist Holocaust victims; including Germans Ludwig Pick, Arthur Simons, and Raphael Weichbrodt, Austrians Alexander Spitzer and Viktor Frankl, and Poles Lucja Frey and Wladyslaw Sterling. by recognizing and remembering these victims of neuroscience, we pay homage and do not allow humanity to forget, lest this dark period in history ever repeat itself.

Market Analysis and Consumer Impacts Source Document. Part III. Consumer Behavior and Attitudes Toward Fuel Efficient Vehicles

Science.gov (United States)

1980-12-01

This source document on motor vehicle market analysis and consumer impacts consists of three parts. Part III consists of studies and reviews on: consumer awareness of fuel efficiency issues; consumer acceptance of fuel efficient vehicles; car size ch...

Modelling Eu(III) speciation in a Eu(III)/PAHA/α-Al2O3 ternary system

International Nuclear Information System (INIS)

Janot, Noemie; Reiller, Pascal E.; Benedetti, Marc F.

2013-01-01

In this work, modelling of Eu(III) speciation in a ternary system, i.e., in presence of purified Aldrich humic acid (PAHA) and α-Al 2 O 3 , is presented. First, the mineral surface charge is measured by potentiometric titrations and then described using the CD-MUSIC model. This model is also used to describe Eu(III) binding to the α-Al 2 O 3 surface at different pH values, ionic strength and mineral concentrations. Time resolved luminescence spectroscopy (TRLS) is then used to study the binding of Eu(III) to PAHA at pH 4 with different humic acid concentrations. The spectra are used to calculate a spectroscopic 'titration curve', used to determine Eu(III)/PAHA binding parameters in the NICA-Donnan model. Following a previous study (Janot et al., Water Res. 46, 731-740), modelling of the ternary system is based upon the definition of two PAHA pools where one fraction remains in solution and the other is adsorbed onto the mineral surface, with each possessing different proton and metal binding parameters. The modification of protonation behaviour for both fractions is examined using spectrophotometric titrations of the non adsorbed PAHA fraction at different organic/mineral ratios. These data are then used to describe Eu(III) interactions in the ternary system: Eu(III) re-partitioning in the ternary system is calculated for different pH, ionic strength and PAHA concentrations, and results are compared to experimental observations. The model is in good agreement with experimental data, except at high PAHA fractionation rates. Results show that organic complexation dominates over a large pH range, with the predominant species existing as the surface-bound fraction. Above pH 8, Eu(III) seems to be mostly complexed to the mineral surface, which is in agreement with previous spectroscopic observations (Janot et al., Environ. Sci. Technol. 45, 3224-3230). (authors)

Mechatronic systems and materials III

CERN Document Server

Gosiewski, Zdzislaw

2009-01-01

This very interesting volume is divided into 24 sections; each of which covers, in detail, one aspect of the subject-matter: I. Industrial robots; II. Microrobotics; III. Mobile robots; IV. Teleoperation, telerobotics, teleoperated semi-autonomous systems; V. Sensors and actuators in mechatronics; VI. Control of mechatronic systems; VII. Analysis of vibration and deformation; VIII. Optimization, optimal design; IX. Integrated diagnostics; X. Failure analysis; XI. Tribology in mechatronic systems; XII. Analysis of signals; XIII. Measurement techniques; XIV. Multifunctional and smart materials;

Power systems for the Doublet III 2-MW ECH system

International Nuclear Information System (INIS)

Remsen, D.B. Jr.

1981-10-01

A system providing 5 second pulses at 60 GHz from ten 200 kW gyrotrons is being prepared for electron cyclotron heating experiments on Doublet III. The power supply for the gyrotron system is a power supply currently under construction by Universal Voltronics Corporation for the Doublet III neutral beam power supply, and is to have the option of reverse polarity (negative) to fill the needs of the system of ten gyrotons operating in parallel. The output of this power supply is 80 kV at 100A for 5 second pulses with good regulation. The output pulse rise and fall times and fault protection response time are all compatible with the gyrotron requirements

The Challenges of Basel III for Romanian Banking System

Directory of Open Access Journals (Sweden)

Anca Elena NUCU

2011-12-01

Full Text Available Basel III represents a fundamental review of the regulatory and supervision framework of the banking industry in the future, the aim being to strengthen the stability of the financial system. The purpose of this paper is to analyze the impact of Basel III introduction upon the banking system at European level, respectively, upon the Romanian banking system. If at European level it is estimated a substantial deficit in capital and liquidity, with major impact on profitability indicators, the impact of Basel III upon banking system in Romania is considered to be limited. The measures which credit institutions could take to mitigate the impact of alignment with the new standards are business model adjustment and balance sheet restructuring.

Experimental fast reactor JOYO MK-III functional test. Primary auxiliary cooling system test

International Nuclear Information System (INIS)

Karube, Koji; Akagi, Shinji; Terano, Toshihiro; Onuki, Osamu; Ito, Hideaki; Aoki, Hiroshi; Odo, Toshihiro

2004-03-01

This paper describes the results of primary auxiliary cooling system, which were done as a part of JOYO MK-III function test. The aim of the tests was to confirm the operational performance of primary auxiliary EMP and the protection system including siphon breaker of primary auxiliary cooling system. The items of the tests were: (Test No.): (Test item). 1) SKS-117: EMP start up test. 2) SKS-118-1: EMP start up test when pony motor running. 3) SKS-121: Function test of siphon breaker. The results of the tests satisfied the required performance, and demonstrated successful operation of primary auxiliary cooling system. (author)

Outgassing measurements and results used in designing the Doublet III Neutral Beam Injector System

International Nuclear Information System (INIS)

Yamamoto, R.M.; Harvey, J.

1979-11-01

Material vacuum properties played an important part in designing the Neutral Beam Injector System for General Atomic's Doublet III Tokamak. Low operating vacuum tank pressures were desired to keep re-ionization of the Neutral Beam to a minimum. Plasma contamination was also a major concern, hence stringent material impurity constraints were imposed. Outgassing Rate Measurement and Residual Gas Analyses were performed on different types of materials to determine if their vacuum properties were compatible with the Neutral Beam Injector System requirements

Use of COMCAN III in system design and reliability analysis

International Nuclear Information System (INIS)

Rasmuson, D.M.; Shepherd, J.C.; Marshall, N.H.; Fitch, L.R.

1982-03-01

This manual describes the COMCAN III computer program and its use. COMCAN III is a tool that can be used by the reliability analyst performing a probabilistic risk assessment or by the designer of a system desiring improved performance and efficiency. COMCAN III can be used to determine minimal cut sets of a fault tree, to calculate system reliability characteristics, and to perform qualitative common cause failure analysis

A Structural Molar Volume Model for Oxide Melts Part III: Fe Oxide-Containing Melts

Science.gov (United States)

Thibodeau, Eric; Gheribi, Aimen E.; Jung, In-Ho

2016-04-01

As part III of this series, the model is extended to iron oxide-containing melts. All available experimental data in the FeO-Fe2O3-Na2O-K2O-MgO-CaO-MnO-Al2O3-SiO2 system were critically evaluated based on the experimental condition. The variations of FeO and Fe2O3 in the melts were taken into account by using FactSage to calculate the Fe2+/Fe3+ distribution. The molar volume model with unary and binary model parameters can be used to predict the molar volume of the molten oxide of the Li2O-Na2O-K2O-MgO-CaO-MnO-PbO-FeO-Fe2O3-Al2O3-SiO2 system in the entire range of compositions, temperatures, and oxygen partial pressures from Fe saturation to 1 atm pressure.

Long-distance digital signal transfers between trigger system and TOF system of BES III

International Nuclear Information System (INIS)

Liu Guangdong; Liu Shubin; An Qi

2007-01-01

This article introduces a design of digital signals communication between the trigger system and the TOF system of BES III. The design can support the BES III successfully, which is based on fiber digital communication, FPGA etc. (authors)

The Challenges of Basel III for Romanian Banking System

OpenAIRE

Anca Elena NUCU

2011-01-01

Basel III represents a fundamental review of the regulatory and supervision framework of the banking industry in the future, the aim being to strengthen the stability of the financial system. The purpose of this paper is to analyze the impact of Basel III introduction upon the banking system at European level, respectively, upon the Romanian banking system. If at European level it is estimated a substantial deficit in capital and liquidity, with major impact on profitability indicators, the i...

Technical Reports (Part I). End of Project Report, 1968-1971, Volume III.

Science.gov (United States)

Western Nevada Regional Education Center, Lovelock.

The pamphlets included in this volume are technical reports prepared as outgrowths of the Student Information Systems of the Western Nevada Regional Education Center (WN-REC) funded by a Title III (Elementary and Secondary Education Act) grant. These reports describe methods of interpreting the printouts from the Student Information System;…

Antiviral type I and type III interferon responses in the central nervous system.

Science.gov (United States)

Sorgeloos, Frédéric; Kreit, Marguerite; Hermant, Pascale; Lardinois, Cécile; Michiels, Thomas

2013-03-15

The central nervous system (CNS) harbors highly differentiated cells, such as neurons that are essential to coordinate the functions of complex organisms. This organ is partly protected by the blood-brain barrier (BBB) from toxic substances and pathogens carried in the bloodstream. Yet, neurotropic viruses can reach the CNS either by crossing the BBB after viremia, or by exploiting motile infected cells as Trojan horses, or by using axonal transport. Type I and type III interferons (IFNs) are cytokines that are critical to control early steps of viral infections. Deficiencies in the IFN pathway have been associated with fatal viral encephalitis both in humans and mice. Therefore, the IFN system provides an essential protection of the CNS against viral infections. Yet, basal activity of the IFN system appears to be low within the CNS, likely owing to the toxicity of IFN to this organ. Moreover, after viral infection, neurons and oligodendrocytes were reported to be relatively poor IFN producers and appear to keep some susceptibility to neurotropic viruses, even in the presence of IFN. This review addresses some trends and recent developments concerning the role of type I and type III IFNs in: i) preventing neuroinvasion and infection of CNS cells; ii) the identity of IFN-producing cells in the CNS; iii) the antiviral activity of ISGs; and iv) the activity of viral proteins of neurotropic viruses that target the IFN pathway.

Antiviral Type I and Type III Interferon Responses in the Central Nervous System

Directory of Open Access Journals (Sweden)

Thomas Michiels

2013-03-01

Full Text Available The central nervous system (CNS harbors highly differentiated cells, such as neurons that are essential to coordinate the functions of complex organisms. This organ is partly protected by the blood-brain barrier (BBB from toxic substances and pathogens carried in the bloodstream. Yet, neurotropic viruses can reach the CNS either by crossing the BBB after viremia, or by exploiting motile infected cells as Trojan horses, or by using axonal transport. Type I and type III interferons (IFNs are cytokines that are critical to control early steps of viral infections. Deficiencies in the IFN pathway have been associated with fatal viral encephalitis both in humans and mice. Therefore, the IFN system provides an essential protection of the CNS against viral infections. Yet, basal activity of the IFN system appears to be low within the CNS, likely owing to the toxicity of IFN to this organ. Moreover, after viral infection, neurons and oligodendrocytes were reported to be relatively poor IFN producers and appear to keep some susceptibility to neurotropic viruses, even in the presence of IFN. This review addresses some trends and recent developments concerning the role of type I and type III IFNs in: i preventing neuroinvasion and infection of CNS cells; ii the identity of IFN-producing cells in the CNS; iii the antiviral activity of ISGs; and iv the activity of viral proteins of neurotropic viruses that target the IFN pathway.

Infinite Particle Systems: Complex Systems III

Directory of Open Access Journals (Sweden)

Editorial Board

2008-06-01

Full Text Available In the years 2002-2005, a group of German and Polish mathematicians worked under a DFG research project No 436 POL 113/98/0-1 entitled "Methods of stochastic analysis in the theory of collective phenomena: Gibbs states and statistical hydrodynamics". The results of their study were summarized at the German-Polish conference, which took place in Poland in October 2005. The venue of the conference was Kazimierz Dolny upon Vistula - a lovely town and a popular place for various cultural, scientific, and even political events of an international significance. The conference was also attended by scientists from France, Italy, Portugal, UK, Ukraine, and USA, which predetermined its international character. Since that time, the conference, entitled "Infinite Particle Systems: Complex Systems" has become an annual international event, attended by leading scientists from Germany, Poland and many other countries. The present volume of the "Condensed Matter Physics" contains proceedings of the conference "Infinite Particle Systems: Complex Systems III", which took place in June 2007.

Towards an interpretation of the mechanism of the actinides(III)/lanthanides(III) separation by synergistic solvent extraction with nitrogen-containing polydendate ligands; Vers une interpretation des mecanismes de la separation actinides(III)/lanthanides(III) par extraction liquide-liquide synergique impliquant des ligands polyazotes

Energy Technology Data Exchange (ETDEWEB)

Francois, N [CEA/VALRHO - site de Marcoule, Dept. de Recherche en Retraitement et en Vitrification, (DRRV), 30 - Marcoule (France); Universite Henri Poincare, 54 - Vandoeuvre-les-Nancy (France)

2000-07-01

In the field of the separation of long-lived radionuclides from the wastes produced by nuclear fuel reprocessing, aromatic nitrogen-containing polydendate ligands are potential candidates for the selective extraction, alone or in synergistic mixture with acidic extractants, of trivalent actinides from trivalent lanthanides. The first part of this work deals with the complexation of trivalent f cations with various nitrogen-containing ligands (poly-pyridine analogues). Time-resolved laser-induced fluorimetry (TRLIF) and UV-visible spectrophotometry were used to determine the nature and evaluate the stability of each complex. Among the ligands studied, the least basic Me-Btp proved to be highly selective towards americium(III) in acidic solution. In the second part, two synergistic systems (nitrogen-containing polydendate ligand and lipophilic carboxylic acid) are studied and compared in regard to the extraction and separation of lanthanides(III) and actinides(III). TRLIF and gamma spectrometry allowed the nature of the extracted complexes and the optimal conditions of efficiency of both systems to be determined. Comparison between these different studies showed that the selectivity of complexation of trivalent f cations by a given nitrogen-containing polydendate ligand could not always be linked to the Am(III)Eu(III) selectivity reached in synergistic extraction. The latter depends on the 'balance' between the acid-basic properties on the one hand, and on the hard-soft characteristics on the other hand, of both components of synergistic system. (author)

Towards an interpretation of the mechanism of the actinides(III)/lanthanides(III) separation by synergistic solvent extraction with nitrogen-containing polydendate ligands; Vers une interpretation des mecanismes de la separation actinides(III)/lanthanides(III) par extraction liquide-liquide synergique impliquant des ligands polyazotes

Energy Technology Data Exchange (ETDEWEB)

Francois, N. [CEA/VALRHO - site de Marcoule, Dept. de Recherche en Retraitement et en Vitrification, (DRRV), 30 - Marcoule (France); Universite Henri Poincare, 54 - Vandoeuvre-les-Nancy (France)

2000-07-01

In the field of the separation of long-lived radionuclides from the wastes produced by nuclear fuel reprocessing, aromatic nitrogen-containing polydendate ligands are potential candidates for the selective extraction, alone or in synergistic mixture with acidic extractants, of trivalent actinides from trivalent lanthanides. The first part of this work deals with the complexation of trivalent f cations with various nitrogen-containing ligands (poly-pyridine analogues). Time-resolved laser-induced fluorimetry (TRLIF) and UV-visible spectrophotometry were used to determine the nature and evaluate the stability of each complex. Among the ligands studied, the least basic Me-Btp proved to be highly selective towards americium(III) in acidic solution. In the second part, two synergistic systems (nitrogen-containing polydendate ligand and lipophilic carboxylic acid) are studied and compared in regard to the extraction and separation of lanthanides(III) and actinides(III). TRLIF and gamma spectrometry allowed the nature of the extracted complexes and the optimal conditions of efficiency of both systems to be determined. Comparison between these different studies showed that the selectivity of complexation of trivalent f cations by a given nitrogen-containing polydendate ligand could not always be linked to the Am(III)Eu(III) selectivity reached in synergistic extraction. The latter depends on the 'balance' between the acid-basic properties on the one hand, and on the hard-soft characteristics on the other hand, of both components of synergistic system. (author)

Thermal sensation and comfort models for non-uniform and transient environments: Part III: whole-body sensation and comfort

OpenAIRE

Zhang, Hui; Arens, Edward; Huizenga, Charlie; Han, Taeyoung

2009-01-01

A three-part series presents the development of models for predicting the local thermal sensation (Part I) and local thermal comfort (Part II) of different parts of the human body, and also the whole-body sensation and comfort (Part III) that result from combinations of local sensation and comfort. The models apply to sedentary activities in a range of environments: uniform and non-uniform, stable and transient. They are based on diverse findings from the literature and from body-part-specifi...

Role of metallothionein-III following central nervous system damage

DEFF Research Database (Denmark)

Carrasco, Javier; Penkowa, Milena; Giralt, Mercedes

2003-01-01

We evaluated the physiological relevance of metallothionein-III (MT-III) in the central nervous system following damage caused by a focal cryolesion onto the cortex by studying Mt3-null mice. In normal mice, dramatic astrogliosis and microgliosis and T-cell infiltration were observed in the area...... the inflammatory response elicited in the central nervous system by a cryoinjury, nor does it serve an important antioxidant role, but it may influence neuronal regeneration during the recovery process....

Network monitoring module of BES III system environment

International Nuclear Information System (INIS)

Song Liwen; Zhao Jingwei; Zhang Bingyun

2002-01-01

In order to meet the needs of the complicated network architecture of BES III (Beijing Spectrometer III) and make sure normal online running in the future, it is necessary to develop a multi-platforms Network Monitoring Tool which can help system administrator monitor and manage BES III network. The author provides a module that can monitor not only the traffic of switch-router's ports but also the performance status of key devices in the network environment, meanwhile it can also give warning to manager and submit the related reports. the great sense, the theory basis, the implementing method and the graph in formation of this tool will be discussed

Thermodynamic model for solution behavior and solid-liquid equilibrium in Na-Al(III)-Fe(III)-Cr(III)-Cl-H2O system at 25°C

Science.gov (United States)

André, Laurent; Christov, Christomir; Lassin, Arnault; Azaroual, Mohamed

2018-03-01

The knowledge of the thermodynamic behavior of multicomponent aqueous electrolyte systems is of main interest in geo-, and environmental-sciences. The main objective of this study is the development of a high accuracy thermodynamic model for solution behavior, and highly soluble M(III)Cl3(s) (M= Al, Fe, Cr) minerals solubility in Na-Al(III)-Cr(III)-Fe(III)-Cl-H2O system at 25°C. Comprehensive thermodynamic models that accurately predict aluminium, chromium and iron aqueous chemistry and M(III) mineral solubilities as a function of pH, solution composition and concentration are critical for understanding many important geochemical and environmental processes involving these metals (e.g., mineral dissolution/alteration, rock formation, changes in rock permeability and fluid flow, soil formation, mass transport, toxic M(III) remediation). Such a model would also have many industrial applications (e.g., aluminium, chromium and iron production, and their corrosion, solve scaling problems in geothermal energy and oil production). Comparisons of solubility and activity calculations with the experimental data in binary and ternary systems indicate that model predictions are within the uncertainty of the data. Limitations of the model due to data insufficiencies are discussed. The solubility modeling approach, implemented to the Pitzer specific interaction equations is employed. The resulting parameterization was developed for the geochemical Pitzer formalism based PHREEQC database.

Type III CRISPR-Cas systems can provide redundancy to counteract viral escape from type I systems.

Science.gov (United States)

Silas, Sukrit; Lucas-Elio, Patricia; Jackson, Simon A; Aroca-Crevillén, Alejandra; Hansen, Loren L; Fineran, Peter C; Fire, Andrew Z; Sánchez-Amat, Antonio

2017-08-17

CRISPR-Cas-mediated defense utilizes information stored as spacers in CRISPR arrays to defend against genetic invaders. We define the mode of target interference and role in antiviral defense for two CRISPR-Cas systems in Marinomonas mediterranea . One system (type I-F) targets DNA. A second system (type III-B) is broadly capable of acquiring spacers in either orientation from RNA and DNA, and exhibits transcription-dependent DNA interference. Examining resistance to phages isolated from Mediterranean seagrass meadows, we found that the type III-B machinery co-opts type I-F CRISPR-RNAs. Sequencing and infectivity assessments of related bacterial and phage strains suggests an 'arms race' in which phage escape from the type I-F system can be overcome through use of type I-F spacers by a horizontally-acquired type III-B system. We propose that the phage-host arms race can drive selection for horizontal uptake and maintenance of promiscuous type III interference modules that supplement existing host type I CRISPR-Cas systems.

Scaled Vitrification System III (SVS III) Process Development and Laboratory Tests at the West Valley Demonstration Project

International Nuclear Information System (INIS)

Jain, V.; Barnes, S.M.; Bindi, B.G.; Palmer, R.A.

2000-01-01

At the West Valley Demonstration Project (WVDP),the Vitrification Facility (VF)is designed to convert the high-level radioactive waste (HLW)stored on the site to a stable glass for disposal at a Department of Energy (DOE)-specified federal repository. The Scaled Vitrification System III (SVS-III)verification tests were conducted between February 1995 and August 1995 as a supplemental means to support the vitrification process flowsheet, but at only one seventh the scale.During these tests,the process flowsheet was refined and optimized. The SVS-III test series was conducted with a focus on confirming the applicability of the Redox Forecasting Model, which was based on the Index of Feed Oxidation (IFO)developed during the Functional and Checkout Testing of Systems (FACTS)and SVS-I tests. Additional goals were to investigate the prototypical feed preparation cycle and test the new target glass composition. Included in this report are the basis and current designs of the major components of the Scale Vitrification System and the results of the SVS-III tests.The major subsystems described are the feed preparation and delivery, melter, and off-gas treatment systems. In addition,the correlation between the melter's operation and its various parameters;which included feed rate,cold cap coverage,oxygen reduction (redox)state of the glass,melter power,plenum temperature,and airlift analysis;were developed

Eleventh annual meeting, Bologna, Italy, 17-20 April 1978. Summary report. Part III

International Nuclear Information System (INIS)

1978-09-01

The Summary Report - Part III of the Eleventh Annual Meeting of the IAEA International Working Group on Fast Reactors - contains the discussions on the commercialization LMFBRs according to national plans, mostly related to technology of fuel fabrication, PHENIX fuel pins testing, heterogeneous cores, in service inspection of fuel elements, regulations and licensing, and related OECD activities. Most of the discussions were related to the existing reactors: BR-10, BN-600, BN-350, BN-1600, RAPSODIE and PHENIX

Eleventh annual meeting, Bologna, Italy, 17-20 April 1978. Summary report. Part III

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-09-01

The Summary Report - Part III of the Eleventh Annual Meeting of the IAEA International Working Group on Fast Reactors - contains the discussions on the commercialization LMFBRs according to national plans, mostly related to technology of fuel fabrication, PHENIX fuel pins testing, heterogeneous cores, in service inspection of fuel elements, regulations and licensing, and related OECD activities. Most of the discussions were related to the existing reactors: BR-10, BN-600, BN-350, BN-1600, RAPSODIE and PHENIX.

Technical and economic assessment of fluidized bed augmented compressed air energy storage system. Volume III. Preconceptual design

Energy Technology Data Exchange (ETDEWEB)

Giramonti, A.J.; Lessard, R.D.; Merrick, D.; Hobson, M.J.

1981-09-01

A technical and economic assessment of fluidized bed combustion augmented compressed air energy storage systems is presented. The results of this assessment effort are presented in three volumes. Volume III - Preconceptual Design contains the system analysis which led to the identification of a preferred component configuration for a fluidized bed combustion augmented compressed air energy storage system, the results of the effort which transformed the preferred configuration into preconceptual power plant design, and an introductory evaluation of the performance of the power plant system during part-load operation and while load following.

Performance of Doublet III neutral beam injector cryopumping system

International Nuclear Information System (INIS)

Langhorn, A.R.; Kim, J.; Tupper, M.L.; Williams, J.P.; Fasolo, J.

1984-01-01

The Doublet III neutral beam injector system is based on three beamlines; each beamline employs two 80 kV/80 A hydrogen ion sources. Two liquid helium (LHe) cooled cryopanel arrays were designed as an integral part of the beamline in order to provide high differential pumping of hydrogen gas along the beamline. The cryopanel arrays consist of a front (nearer to the torus) disk panel (3 m 2 each side) with liquid nitrogen (LN 2 ) cooled chevrons and a rear cylindrical panel of modified Santeler panels (8 m 2 ) which also employs LN 2 cooled surfaces shielding LHe cooled surfaces. These cryopanels are piped in series. The LHe delivery is based on a closed-loop, forced-flow scheme intended for variable panel temperatures (3.7 to 4.3 K). It uses small tubes for mechanical flexibility and thermal resiliency providing ease of economic defrosting. The cryogenic system consists of a liquefier (100 l/h), a large Dewar, a heat exchanger, and a liquid ring pump. Three beamlines are serviced simultaneously by the system. Pumping speeds measured locally at ionization gauges, were well in excess of the 1.4 x 10 6 l/s design goal

Inductrack III configuration--a maglev system for high loads

Science.gov (United States)

Post, Richard F

2013-11-12

Inductrack III configurations are suited for use in transporting heavy freight loads. Inductrack III addresses a problem associated with the cantilevered track of the Inductrack II configuration. The use of a cantilevered track could present mechanical design problems in attempting to achieve a strong enough track system such that it would be capable of supporting very heavy loads. In Inductrack III, the levitating portion of the track can be supported uniformly from below, as the levitating Halbach array used on the moving vehicle is a single-sided one, thus does not require the cantilevered track as employed in Inductrack II.

Thermodynamic model for solution behavior and solid-liquid equilibrium in Na-Al(III-Fe(III-Cr(III-Cl-H2O system at 25°C

Directory of Open Access Journals (Sweden)

André Laurent

2018-03-01

Full Text Available The knowledge of the thermodynamic behavior of multicomponent aqueous electrolyte systems is of main interest in geo-, and environmental-sciences. The main objective of this study is the development of a high accuracy thermodynamic model for solution behavior, and highly soluble M(IIICl3(s (M= Al, Fe, Cr minerals solubility in Na-Al(III-Cr(III-Fe(III-Cl-H2O system at 25°C. Comprehensive thermodynamic models that accurately predict aluminium, chromium and iron aqueous chemistry and M(III mineral solubilities as a function of pH, solution composition and concentration are critical for understanding many important geochemical and environmental processes involving these metals (e.g., mineral dissolution/alteration, rock formation, changes in rock permeability and fluid flow, soil formation, mass transport, toxic M(III remediation. Such a model would also have many industrial applications (e.g., aluminium, chromium and iron production, and their corrosion, solve scaling problems in geothermal energy and oil production. Comparisons of solubility and activity calculations with the experimental data in binary and ternary systems indicate that model predictions are within the uncertainty of the data. Limitations of the model due to data insufficiencies are discussed. The solubility modeling approach, implemented to the Pitzer specific interaction equations is employed. The resulting parameterization was developed for the geochemical Pitzer formalism based PHREEQC database.

Tenth annual meeting, Vienna, Austria, 29 March - 1 April 1977. Summary report. Part III

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-11-01

The Summary Report - Part III of the Tenth Annual Meeting of the IAEA International Working Group on Fast Reactors - contains the discussions on the commercial development of FBRs according to national plans, mostly related to technology problems of containment design, fuel fabrication, fuel failures, sodium pressure, fuel-sodium interaction, computer codes needed for licensing. Most of the discussions were related to the existing reactors: BN-600, BN-350, BN-1600, BOR-60, RAPSODIE, PHENIX.

Tenth annual meeting, Vienna, Austria, 29 March - 1 April 1977. Summary report. Part III

International Nuclear Information System (INIS)

1977-11-01

The Summary Report - Part III of the Tenth Annual Meeting of the IAEA International Working Group on Fast Reactors - contains the discussions on the commercial development of FBRs according to national plans, mostly related to technology problems of containment design, fuel fabrication, fuel failures, sodium pressure, fuel-sodium interaction, computer codes needed for licensing. Most of the discussions were related to the existing reactors: BN-600, BN-350, BN-1600, BOR-60, RAPSODIE, PHENIX

Towards an interpretation of the mechanism of the actinides(III)/lanthanides(III) separation by synergistic solvent extraction with nitrogen-containing polydendate ligands

International Nuclear Information System (INIS)

Francois, N.

2000-01-01

In the field of the separation of long-lived radionuclides from the wastes produced by nuclear fuel reprocessing, aromatic nitrogen-containing polydendate ligands are potential candidates for the selective extraction, alone or in synergistic mixture with acidic extractants, of trivalent actinides from trivalent lanthanides. The first part of this work deals with the complexation of trivalent f cations with various nitrogen-containing ligands (poly-pyridine analogues). Time-resolved laser-induced fluorimetry (TRLIF) and UV-visible spectrophotometry were used to determine the nature and evaluate the stability of each complex. Among the ligands studied, the least basic Me-Btp proved to be highly selective towards americium(III) in acidic solution. In the second part, two synergistic systems (nitrogen-containing polydendate ligand and lipophilic carboxylic acid) are studied and compared in regard to the extraction and separation of lanthanides(III) and actinides(III). TRLIF and gamma spectrometry allowed the nature of the extracted complexes and the optimal conditions of efficiency of both systems to be determined. Comparison between these different studies showed that the selectivity of complexation of trivalent f cations by a given nitrogen-containing polydendate ligand could not always be linked to the Am(III)Eu(III) selectivity reached in synergistic extraction. The latter depends on the 'balance' between the acid-basic properties on the one hand, and on the hard-soft characteristics on the other hand, of both components of synergistic system. (author)

Spectroscopic studies on the interaction of europium(III) and curium(III) with components of the human mucosa

Energy Technology Data Exchange (ETDEWEB)

Wilke, Claudia; Barkleit, Astrid [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Div. Chemistry of the F-Elements

2016-07-01

To evaluate the health risks of lanthanides (Ln) and radiotoxic actinides (An) in case of ingestion accidents etc., investigations into the chemical reactions of these metals in the human gastrointestinal tract are necessary. Our previous study revealed that mucin, an important part of the protective mucosa layer in the digestive system, shows a strong interaction with Eu(III). Based on these results, the present study focuses on the components of this glycoprotein and identified N-acetylneuraminic acid (NANA) as the dominant binding carbohydrate of mucin. TRLFS measurements suggest the formation of a 1: 1 complex with log β of 3.2 ± 0.1 for Eu(III) and 3.3 ± 0.1 for Cm(III), respectively.

Fracture toughness of A533B Part III - variability of A533B fracture toughness as determined from Charpy data

International Nuclear Information System (INIS)

Druce, S.G.; Eyre, B.L.

1978-08-01

This is the final part of a series of three reports examining the upper shelf fracture toughness of A533B Class 1 pressure vessel steel. Part I (AERE R 8968) critically reviews the current elasto plastic fracture mechanics methodologies employed to characterise toughness following extensive yielding and Part II (AERE R 8969) examines several sources of fracture mechanics data pertinent to A533B Class 1 in the longitudinal (RW) orientation. Part III is a review of the effects of (i) position and orientation within the plate (ii) welding processes and post weld heat treatment and (iii) neutron irradiation as measured by Charpy impact testing. It is concluded that the upper shelf factor energy is dependent on orientation and position and can be reduced by welding, extended post weld heat treatments and neutron irradiation. Neutron irradiation effects are known to be strongly dependent on composition and metallurgical conditions, but an explanation for the variability following extended post weld treatments has yet to be resolved. (author)

Thallium (III) salts utilization in organic synthesis. Part II

International Nuclear Information System (INIS)

Ferraz, H.M.C.

1989-01-01

The utilizations of thallium (III) salts in organic synthesis with carbonylic and acitylenic substrates are presented. The reactions of carbonylic substra3ts with kitones and the oxidation reactions of acetylenic substrates are shown. Others reactions including thallium (III) salts and non aromatic unsatured substracts, as cleasage of ethers and epoxide using thallium trinitrate, hydrazones treatments with thallium triacetates, etc, are also mentioned. (C.G.C.) [pt

Building human resources capability in health care: a global analysis of best practice--Part III.

Science.gov (United States)

Zairi, M

1998-01-01

This is the last part of a series of three papers which discussed very comprehensively best practice applications in human resource management by drawing special inferences to the healthcare context. It emerged from parts I and II that high performing organisations plan and intend to build sustainable capability through a systematic consideration of the human element as the key asset and through a continuous process of training, developing, empowering and engaging people in all aspects of organisational excellence. Part III brings this debate to a close by demonstrating what brings about organisational excellence and proposes a road map for effective human resource development and management, based on world class standards. Healthcare human resource professionals can now rise to the challenge and plan ahead for building organisational capability and sustainable performance.

Modeling ecological and economic systems with STELLA : Part III

NARCIS (Netherlands)

Costanza, Robert; Voinov, Alexey

2001-01-01

This special issue contains a group of eight modeling studies covering a range of ecological and economic systems and problems. The models were all developed using Stella®, an icon-based software package specifically designed for dynamic systems modeling. Models included in the special issue were

THE IMPACT OF BASEL III AGREEMENT ON THE ROMANIAN BANKING SYSTEM

Directory of Open Access Journals (Sweden)

Mihaela SUDACEVSCHI

2015-07-01

Full Text Available Basel III Agreement is a set of regulations on the banking system, which aims to ensure the system stability, by applying new standards on the capital level and on the liquidity level adequacy and also, on the reduction of banking risk, implied by the financial crisis. Romanian commercial banks will be forced, by the Basel III Agreement implementation, to reduce the risk of capital, using the balance sheet restructuring and by improving the capital quality. The aim of this paper is to analyze the impact of implementing new capital requirements, stipulated by Basel III Agreement, on the Romanian commercial banks, how they will react to the new standards and the decisions they will be able to adopt to respect the standards.

The extraction behaviour of As(III) and As(V) in APDC-CCl4 system

International Nuclear Information System (INIS)

Yang Ruiying; Zhu Xuping

1997-01-01

The extraction and back-extraction behaviour of As(III) and As(V) in APDC-CCl 4 system have been studied by using 76 As trace technique. As(III) can be extracted quantitatively by APDC-CCl 4 system at pH = 1-3. As(V) can be extracted after being reduced to As(III) by Na 2 S 2 O 3 . Water with high pH value can be used for back-extraction. The method can be applied in the separation of inorganic As(III) and As(V) in water quality inspection

ECAT III: A new PET system for heart and whole body dynamic imaging

International Nuclear Information System (INIS)

Hoffman, E.J.; Phelps, M.E.; Huang, S.C.; Collard, P.E.; Bidaut, L.M.; Schwab, R.L.; Schwaiger, M.; Schelbert, H.R.

1985-01-01

A new whole body PET system has been developed and is being evaluated. The ECAT III consists of 1 to 4 rings of 512-5.6 x 29 x 30 mm BGO detectors per 100 cm diameter ring. The system has a unique data collection scheme in which all events are buffered in a 512 by 32 data matrix. The 512 dimension corresponds to detector number and the 32 dimension corresponds to 8 nsec time bins. A dedicated microprocessor searches the array (1) to determine which detectors had events simultaneously +- 8 nsec to establish coincidences, (2) to determine accidentals by determining the probability of off-time events, which can be determined with a statistical accuracy improvement of a factor of 10 by using a larger ''software'' time window, and (3) to determine and distinguish between adjacent detector crosstalk and random triple events. System can process 500 K coincident events/sec/per image plane. Data are collected in list mode and scan parameter information, such as time, wobble position and occurrence of gating signals are inserted in data. Wobble position is divided in 1000 parts per rotation, minimizing positioning error in binning events, timing information allows retrospective choice of time frame for dynamic studies and cardiac gate data allows retrospective choice of framing. ECAT III has an image resolution of 4.5 mm when system is wobbled and 7.2 mm when system is stationary. Loss of efficiency due to nearest neighbor cross talk is 8 to 12%. Axial resolution is selectable with remotely driven side shielding, and interchangeable interplane sept allow different configurations to accomodate a variety of imaging conditions

TITLE III EVALUATION REPORT FOR THE MATERIAL AND PERSONNEL HANDLING SYSTEM

International Nuclear Information System (INIS)

T. A. Misiak

1998-01-01

This Title III Evaluation Report (TER) provides the results of an evaluation that was conducted on the Material and Personnel Handling System. This TER has been written in accordance with the ''Technical Document Preparation Plan for the Mined Geologic Disposal System Title III Evaluation Reports'' (BA0000000-01717-4600-00005 REV 03). The objective of this evaluation is to provide recommendations to ensure consistency between the technical baseline requirements, baseline design, and the as-constructed Material and Personnel Handling System. Recommendations for resolving discrepancies between the as-constructed system, the technical baseline requirements, and the baseline design are included in this report. Cost and Schedule estimates are provided for all recommended modifications

50 CFR 23.4 - What are Appendices I, II, and III?

Science.gov (United States)

2010-10-01

... (CONTINUED) TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF... of Appendix-I, -II, and -III species and their parts, products, and derivatives through a system of...

The Davros III supervisory control system

International Nuclear Information System (INIS)

Rice, P.

1996-01-01

Magnox Electric's Remote Operations Branch deploy a wide variety of remote inspection and maintenance tools into nuclear plant in order to perform a variety of tasks. In recent years much progress has been made on low-level control of individual manipulator axes, and a parallel need has emerged for a supervisory system to assist the operator in the control of the whole system. Some requirements are: 1) to improve operator control of systems; 2) to simplify software maintenance and version control; 3) to reduce the likelihood of damage to manipulators; 4) to assist with rehearsals and simulations. Davros III is a PC software system which has been developed over a number of years to address these requirements. In a single program capable of being configured for a wide variety of applications, it provides a technique for following pretaught routes, a comprehensive and fully configurable interlock system and several different facilities for simulation. (author)

The Davros III supervisory control system

International Nuclear Information System (INIS)

Rice, P.

1996-01-01

Magnox Electric's Remote Operations Bbranch deploy a wide variety of remote inspection and maintenance tools into nuclear plant in order to perform a variety of tasks. In recent years much progress has been made on low-level control of individual manipulator axes and a parallel need has emerged for a supervisory system to assist the operator in the control of the whole system. Some requirements are: 1, To improve operator control of systems. 2, To simplify software maintenance and version control. 3, To reduce the likelihood of damage to manipulators. 4, To assist with rehearsals and simulations. Davros III is a PC software system which has been developed over a number of years to address these requirements. In a single program capable of being configured for a wide variety of applications, it provides a technique for following pretaught routes, a comprehensive and fully configurable interlock system and several different facilities for simulation. (author)

CCF analysis of BWR reactor shutdown systems based on the operating experience at the TVO I/II in 1981-1993

International Nuclear Information System (INIS)

Mankamo, T.

1996-04-01

The work constitutes a part of the project conducted within the research program of the Swedish Nuclear Power Inspectorate SKI, aimed to develop the methods and data base for the Common Cause Failure (CCF) analysis of highly redundant reactor scram systems. The data analysis for the TVO I/II plant is focused on the hydraulic scram system, and control rods and drives. It covers operating experiences from 1981 through 1993. (9 refs., 9 figs., 7 tabs.)

Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter III: impurity control (engineering)

International Nuclear Information System (INIS)

Seki, Masahiro; Miki, Nobuharu; Shibutani, Yoji; Fujimura, Kaoru; Adachi, Jun-ichi; Sato, Kosuke; Fujii, Masaharu; Yamazaki, Seiichiro; Itoh, Shin-ichi.

1985-07-01

This report corresponds to the second half of Chapter III of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 2. Data base assessment are made on candidate materials for the divertor, limiter, and the first wall. Engineering trade-off studies are made for the high-recycling and low temperature conditions. The studies include material considerations, configuration, thermohydraulic and stress analysis, disruption, lifetime analysis, and tritium permeation. (author)

An overview of a multifactor-system theory of personality and individual differences: III. Life span development and the heredity-environment issue.

Science.gov (United States)

Powell, A; Royce, J R

1981-12-01

In Part III of this three-part series on multifactor-system theory, multivariate, life-span development is approached from the standpoint of a quantitative and qualitative analysis of the ontogenesis of factors in each of the six systems. The pattern of quantitative development (described via the Gompertz equation and three developmental parameters) involves growth, stability, and decline, and qualitative development involves changes in the organization of factors (e.g., factor differentiation and convergence). Hereditary and environmental sources of variation are analyzed via the factor gene model and the concept of heredity-dominant factors, and the factor-learning model and environment-dominant factors. It is hypothesized that the sensory and motor systems are heredity dominant, that the style and value systems are environment dominant, and that the cognitive and affective systems are partially heredity dominant.

Construction of the Cleo III drift chamber

International Nuclear Information System (INIS)

Csorna, S.; Marka, S.; Dickson, M.; Dombrowski, S. von; Peterson, D.; Thies, P.; Glenn, S.; Thorndike, E.H.; Kravchenko, I.

1998-01-01

The CLEO III group is constructing a new chamber to be installed as part of the staged luminosity upgrade program at the Cornell electron storage ring and compatible with the interaction region optics. Although having less radial extent than the current CLEO II tracking system, CLEO III will have equivalent momentum resolution because of material reduction in the drift chamber inner skin and gas. The thin inner skin requires special attention to the end-plate motion due to wire creep. During stringing, use of a robot will fully automate the wire handling on the upper end. (author)

Distributed inter process communication framework of BES III DAQ online software

International Nuclear Information System (INIS)

Li Fei; Liu Yingjie; Ren Zhenyu; Wang Liang; Chinese Academy of Sciences, Beijing; Chen Mali; Zhu Kejun; Zhao Jingwei

2006-01-01

DAQ (Data Acquisition) system is one important part of BES III, which is the large scale high-energy physics detector on the BEPC. The inter process communication (IPC) of online software in distributed environments is very pivotal for design and implement of DAQ system. This article will introduce one distributed inter process communication framework, which is based on CORBA and used in BES III DAQ online software. The article mainly presents the design and implementation of the IPC framework and application based on IPC. (authors)

Considerations Related to LTO for Gen II/III NPP

International Nuclear Information System (INIS)

Cojan, Mihail

2012-01-01

Today there are some 435 nuclear power reactors operating in 30 countries with a combined capacity of over 372 GWe. In 2011 these provided 2518 billion kWh, about 14% of the world's electricity [1]. The next evolutionary design of Generation III reactors to be deployed over many decades will represent a large part of the worldwide fleet throughout the 21st century. Generation III reactors are the future NPPs with improved safety and reliability, with passive safety systems and with a very low probability for core melt. The objective of this paper is to present the R and D activities that support LTO for Generation II / III Nuclear Reactors. (author)

Reactions of sigma-bonded organochromium(III)complexes

International Nuclear Information System (INIS)

Leslie, J.P. II.

1975-12-01

Three projects were carried out, each dealing with the kinetics and mechanism of reactions of sigma-bonded organochromium(III) complexes of the form (H 2 O) 5 CrR 2+ . Part I describes the kinetics of the reaction of dichloromethylchromium(III) ion with chromium(II) ion in aqueous acid. Part II deals with the radioexchange of 4-pyridinomethylchromium(III) ion with 51 Cr 2+ and the kinetics of formation of the organochromium species at 55 0 in 1 M H + . Part III deals with the reactions of Hg 2+ and CH 3 Hg + with a series of (H 2 O) 5 CrR 2+ complexes, in which R is an aliphatic alkyl group, a haloalkyl group, or an aralkyl group

Tanzania 1895-1920 : Part III: 1914-1920s

NARCIS (Netherlands)

Dietz, A.J.

2016-01-01

An earlier version of this African Postal Heritage Paper was published as African Studies Centre Leiden Working Paper 119 / 2015: "A postal history of the First World War in Africa and its aftermath - German colonies; III Deutsch Ostafrika / German East Africa", written by Ton Dietz.

Tuning of "antenna effect" of Eu(III) in ternary systems in aqueous medium through binding with protein.

Science.gov (United States)

Ghorai, Shyamal Kr; Samanta, Swarna Kamal; Mukherjee, Manini; Saha Sardar, Pinki; Ghosh, Sanjib

2013-02-04

A simple ternary system containing a protein [human serum albumin (HSA)/bovine serum albumin (BSA)], tetracycline hydrochloride (TC), and Eu(III) in suitable aqueous buffer medium at physiological pH (= 7.2) has been shown to exhibit highly efficient "antenna effect" compared to the binary complex of TC with Eu(III) (Eu(3)TC). The ternary system containing E. coli alkaline phosphatase (AP), TC, and Eu(III), however, shows a slight enhancement of Eu(III) emission, although the binding constant of AP with TC is 2 orders of magnitude greater than with BSA/HSA. The enhanced emission of bound TC in the binary systems containing proteins and TC gets quenched in the ternary systems containing HSA/BSA, showing the efficient energy transfer (ET) from TC to Eu(III). Steady state and time-resolved emission studies of each component in all the ternary systems in H(2)O and in D(2)O medium reveal that Eu(III) is very well protected from the O-H oscillator in the ternary system containing HSA/BSA compared to that containing AP. The docking studies locating the binding site of TC in the proteins suggest that TC binds near the surface of AP. In the case of HSA/BSA, TC resides in the interior of the protein resulting in a large shielding effect of Eu(III). The rotational correlation time (θ(c)) determined from the anisotropy decay of bound TC in the complexes and the accessible surface area (ASA) of the ligand in the complexes obtained from the docking studies also support the contention that Eu(3)TC is more exposed to solvent in the case of the ternary system consisting of AP, TC, and Eu(III). The calculated radiative lifetime and the sensitization efficiency ratio of Eu(III) in all the systems clearly demonstrate the protein mediated tuning of "antenna effect" in Eu(III).

Terbium(III) ions as sensitizers of oxidation of indole and its derivatives in Fenton system

Energy Technology Data Exchange (ETDEWEB)

Kaczmarek, Małgorzata, E-mail: mkaczmar@amu.edu.pl; Staninski, Krzysztof

2017-03-15

Oxidation of indole and its derivatives in the Fenton system as a source of oxidising agents, in the presence of terbium(III) ions was studied by chemiluminescence methods to get the kinetic curves of emission decay and spectral distributions of chemiluminescence. Terbium(III) ions acted as a sensitizer of the mixtures Tb(III)-Fe(II)/Fe(III)-H{sub 2}O{sub 2}-indole or its derivative (tryptophan, tryptamine, indole-3-acetic acid and indole-3-acetyl aspartic acid). For the above indolic compounds, linear dependencies of integrated intensity of chemiluminescence on concentration of indolic compound in water and in water-acetonitrile solution were obtained. The limits of detection (LOD) and quantification (LOQ) of the indolic compounds studied were found to be by one or two orders of magnitude lower in the system with terbium(III) ions than without them. - Highlights: • Chemiluminescence emitted on oxidation of indolic compounds in Fenton system. • Tb (III) ions as sensitizers of indolic compounds oxidation in solutions. • Linear relations between CL intensity and indolic compound concentration.

Inhibition of a type III secretion system by the deletion of a short loop in one of its membrane proteins

Energy Technology Data Exchange (ETDEWEB)

Meshcheryakov, Vladimir A. [Okinawa Instiute of Science and Technology, Okinawa 904-0495 (Japan); Kitao, Akio [University of Tokyo, Tokyo 113-0032 (Japan); Core Research for Evolutionary Science and Technology, Tokyo 113-0032 (Japan); Matsunami, Hideyuki; Samatey, Fadel A., E-mail: f.a.samatey@oist.jp [Okinawa Instiute of Science and Technology, Okinawa 904-0495 (Japan)

2013-05-01

Crystal structures of the cytoplasmic domain of FlhB from S. typhimurium and A. aeolicus were solved at 2.45 and 2.55 Å resolution, respectively. The deletion of a short loop in the cytoplasmic domain of Salmonella FlhB completely abolishes secretion by the type III secretion system. A molecular-dynamics simulation shows that the deletion of the loop affects the flexibility of a linker between the transmembrane and cytoplasmic domains of FlhB. The membrane protein FlhB is a highly conserved component of the flagellar secretion system. It is composed of an N-terminal transmembrane domain and a C-terminal cytoplasmic domain (FlhB{sub C}). Here, the crystal structures of FlhB{sub C} from Salmonella typhimurium and Aquifex aeolicus are described at 2.45 and 2.55 Å resolution, respectively. These flagellar FlhB{sub C} structures are similar to those of paralogues from the needle type III secretion system, with the major difference being in a linker that connects the transmembrane and cytoplasmic domains of FlhB. It was found that deletion of a short flexible loop in a globular part of Salmonella FlhB{sub C} leads to complete inhibition of secretion by the flagellar secretion system. Molecular-dynamics calculations demonstrate that the linker region is the most flexible part of FlhB{sub C} and that the deletion of the loop reduces this flexibility. These results are in good agreement with previous studies showing the importance of the linker in the function of FlhB and provide new insight into the relationship between the different parts of the FlhB{sub C} molecule.

Gene and transcript abundances of bacterial type III secretion systems from the rumen microbiome are correlated with methane yield in sheep.

Science.gov (United States)

Kamke, Janine; Soni, Priya; Li, Yang; Ganesh, Siva; Kelly, William J; Leahy, Sinead C; Shi, Weibing; Froula, Jeff; Rubin, Edward M; Attwood, Graeme T

2017-08-08

Ruminants are important contributors to global methane emissions via microbial fermentation in their reticulo-rumens. This study is part of a larger program, characterising the rumen microbiomes of sheep which vary naturally in methane yield (g CH 4 /kg DM/day) and aims to define differences in microbial communities, and in gene and transcript abundances that can explain the animal methane phenotype. Rumen microbiome metagenomic and metatranscriptomic data were analysed by Gene Set Enrichment, sparse partial least squares regression and the Wilcoxon Rank Sum test to estimate correlations between specific KEGG bacterial pathways/genes and high methane yield in sheep. KEGG genes enriched in high methane yield sheep were reassembled from raw reads and existing contigs and analysed by MEGAN to predict their phylogenetic origin. Protein coding sequences from Succinivibrio dextrinosolvens strains were analysed using Effective DB to predict bacterial type III secreted proteins. The effect of S. dextrinosolvens strain H5 growth on methane formation by rumen methanogens was explored using co-cultures. Detailed analysis of the rumen microbiomes of high methane yield sheep shows that gene and transcript abundances of bacterial type III secretion system genes are positively correlated with methane yield in sheep. Most of the bacterial type III secretion system genes could not be assigned to a particular bacterial group, but several genes were affiliated with the genus Succinivibrio, and searches of bacterial genome sequences found that strains of S. dextrinosolvens were part of a small group of rumen bacteria that encode this type of secretion system. In co-culture experiments, S. dextrinosolvens strain H5 showed a growth-enhancing effect on a methanogen belonging to the order Methanomassiliicoccales, and inhibition of a representative of the Methanobrevibacter gottschalkii clade. This is the first report of bacterial type III secretion system genes being associated with high

Silicon photonics III systems and applications

CERN Document Server

Lockwood, David

2016-01-01

This book is volume III of a series of books on silicon photonics. It reports on the development of fully integrated systems where many different photonics component are integrated together to build complex circuits. This is the demonstration of the fully potentiality of silicon photonics. It contains a number of chapters written by engineers and scientists of the main companies, research centers and universities active in the field. It can be of use for all those persons interested to know the potentialities and the recent applications of silicon photonics both in microelectronics, telecommunication and consumer electronics market.

Molecular and supramolecular speciations of solvent extraction systems based on malonamide and/or dialkyl-phosphoric acids for An(III)/Ln(III); Speciations moleculaire et supramoleculaire de systemes d'extraction liquide-liquide a base de malonamide et/ou d'acides dialkylphosphoriques pour la separation An(III)/Ln(III)

Energy Technology Data Exchange (ETDEWEB)

Gannaz, B

2006-06-15

The solvent extraction system used in the DIAMEX-SANEX process, developed for the actinide(III)/lanthanide(III) separation, is based on the use of mixtures of the malonamide DMDOHEMA and a dialkyl-phosphoric acid (HDEHP or HDHP), in hydrogenated tetra-propylene. The complexity of these systems urges on a novel approach to improve the conventional methods (thermodynamics, solvent extraction) which hardly explain the macroscopic behaviors observed (3. phase, over-stoichiometry). This approach combines studies on both supramolecular (VPO, SANS, SAXS) and molecular (liquid-liquid extraction, ESI-MS, IR, EXAFS) speciations of single extractant systems (DMDOHEMA or HDHP in in n-dodecane) and their mixture. In spite of safety constraints due to the handling of radio-material, they were used in the studies as much as possible, like for SAXS measurements on americium-containing samples, a worldwide first-time. In each of the investigated systems, actinides(III) and lanthanides(III) are extracted to the organic phase in polar cores of reversed micelles, the inner and outer-sphere compositions of which are proposed. Thus, the 4f and 5f cations are extracted by reversed micelles such as [(DMDOHEMA){sub 2}M(NO{sub 3}){sub 3}]{sub inn} (DMDOHEMA){sub x}(HNO{sub 3}){sub z}(H{sub 2}O){sub w}]{sub out} and M(DHP){sub 3}(HDHP){sub y-3}(H{sub 2}O){sub w} with y = 3 to 6, for the single extractant systems. In the case of the two extractants system, the less concentrated one acts like a co-surfactant regarding the mixed aggregate formation [(DMDOHEMA){sub 2}M(NO{sub 3}){sub 3-v}(DHP){sub v}]{sub inn} [(DMDOFIEMA){sub x}(HDHP){sub y}(HNO{sub 3})z(H{sub 2}O){sub w}]{sub out}. (author)

Load Flow and Short Circuit Analysis of the Class III Power System of HANARO

Energy Technology Data Exchange (ETDEWEB)

Kim, H. K.; Jung, H. S

2005-12-15

The planning, design, and operation of electric power system require engineering studies to assist in the evaluation of the system performance, reliability, safety and economics. The Class III power of HANARO supplies power for not only HANARO but also RIPF and IMEF. The starting current of most ac motors is five to ten times normal full load current. The loads of the Class III power are connected in consecutive orders at an interval for 10 seconds to avoid excessive voltage drop. This technical report deals with the load flow study and motor starting study for the Class III power of HANARO using ETAP(Electrical Transient Analyzer Program) to verify the capacity of the diesel generator. Short-circuit studies are done to determine the magnitude of the prospective currents flowing throughout the power system at various time intervals after a fault occurs. Short-circuit studies can be performed at the planning stage in order to help finalize the system layout, determine voltage levels, and size cables, transformers, and conductors. From this study, we verify the short circuit current capacity of air circuit breaker(ACB) and automatic transfer switch(ATS) of the Class III power.

Peatlands as Filters for Polluted Mine Water?—A Case Study from an Uranium-Contaminated Karst System in South Africa—Part III: Quantifying the Hydraulic Filter Component

Directory of Open Access Journals (Sweden)

Frank Winde

2011-03-01

Full Text Available As Part III of a four-part series on the filter function of peat for uranium (U, this paper focuses on the hydraulic component of a conceptual filter model introduced in Part II. This includes the quantification of water flow through the wetland as a whole, which was largely unknown and found to be significantly higher that anticipated. Apart from subaquatic artesian springs associated with the underlying karst aquifer the higher flow volumes were also caused by plumes of polluted groundwater moving laterally into the wetland. Real-time, quasi-continuous in situ measurements of porewater in peat and non-peat sediments indicate that rising stream levels (e.g., during flood conditions lead to the infiltration of stream water into adjacent peat deposits and thus allow for a certain proportion of flood water to be filtered. However, changes in porewater quality triggered by spring rains may promote the remobilization of possibly sorbed U.

Solvent extraction of anionic chelate complexes of lanthanum(III), europium(III), lutetium(III), scandium(III), and indium(III) with 2-thenoyltrifluoroacetone as ion-pairs with tetrabutylammonium ions

International Nuclear Information System (INIS)

Noro, Junji; Sekine, Tatsuya.

1992-01-01

The solvent extraction of lanthanum(III), europium(III), lutetium(III), scandium(III), and indium(III) in 0.1 mol dm -3 sodium nitrate solutions with 2-thenoyltrifluoroacetone (Htta) in the absence and presence of tetrabutylammonium ions (tba + ) into carbon tetrachloride was measured. The extraction of lanthanum(III), europium(III), and lutetium(III) was greatly enhanced by the addition of tba + ; this could be explained in terms of the extraction of a ternary complex, M(tta) 4 - tba + . However, the extractions of scandium(III) and indium(III) were nearly the same when tba + was added. The data were treated on the basis of the formation equilibrium of the ternary complex from the neutral chelate, M(tta) 3 , with the extracted ion-pairs of the reagents, tta - tba + , in the organic phase. It was concluded that the degree of association of M(tta) 3 with the ion-pair, tta - tba + , is greater in the order La(tta) 3 ≅ Eu(tta) 3 > Lu(tta) 3 , or that the stability of the ternary complex in the organic phase is higher in the order La(tta) 4 - tba + ≅ Eu(tta) 4 - tba + > Lu(tta) 4 - tba + . This is similar to those of adduct metal chelates of Htta with tributylphosphate (TBP) in synergistic extraction systems. (author)

Enhancement of the fluorescence of the samarium (III) complex by gadolinium (III)

International Nuclear Information System (INIS)

Yun-Xiang, C.; Zhang-Hua, L.

1988-01-01

The increase in sensitivity and selectivity of reactions in which colored species are formed by the addition of different metal ions is an area of research that has recently been developed. This phenomenon, which is sometimes called cocolaration effect, has been explained by the formation of mixed metal complex. The authors found an analogous phenomenon of reactions forming fluorescent complexes. The complexes of Sm(III)-thenoyltrifluoroacetone (TTA)-phenanthroline (Phen)-Triton-X-100 (TX-100) and Gd(III) (or La(III), Lu(III) and Y(III))-TTA-Phen-TX-100 had practically no fluorescence separately. Instead, a fluorescence-enhancement phenomenon caused by adding Gd or La, Lu and Y ions to the system was observed for the first time. The intensity of the enhanced fluorescence of Sm(III) complex was increased in the following order: La< Y< Lu< Gd. By analogy with cocoloration effect, the authors call this new fluorescence-enhancement phenomenon the co-fluorescence effect. The object of this work was to study the enhancement effect of Gd(III) on the fluorescence of the Sm(III)-TTA-Phen-TX-100 system. The recommended fluorimetric method has been applied to the determination of trace amounts of samarium in ytterbium oxide with satisfactory results. A general reaction mechanism for the system studied was proposed

Cubby : Multiscreen Desktop VR Part III

NARCIS (Netherlands)

Djajadiningrat, J.P.; Gribnau, M.W.

2000-01-01

In this month's final episode of our 'Cubby: Multiscreen Desktop VR' trilogy we explain how you read the InputSprocket driver from part II, how you use it as input for the cameras from part I and how you calibrate the input device so that it leads to the correct head position.

Fluorescence Resonance Energy Transfer of the Tb(III)-Nd(III) Binary System in Molten LiCl-KCl Eutectic Salt

Energy Technology Data Exchange (ETDEWEB)

Kim, B. Y. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Yun, J. I. [KAIST, Daejeon (Korea, Republic of)

2015-05-15

The lanthanides act as a neutron poison in nuclear reactor with large neutron absorption cross section. For that reason, very low amount of lanthanides is required in the recovered U/TRU ingot product from pyrochemical process. In view of that, the investigation of thermodynamic properties and chemical behaviors of lanthanides in molten chloride salt are necessary to estimate the performance efficiency of pyrochemical process. However, there are uncertainties about knowledge and understanding of basic mechanisms in pyrochemical process, such as chemical speciation and redox behaviors due to the lack of in-situ monitoring methods for high temperature molten salt. The spectroscopic analysis is one of the probable techniques for in-situ qualitative and quantitative analysis. Recently, a few fluorescence spectroscopic measurements on single lanthanide element in molten LiCl-KCl eutectic have been investigated. The fluorescence intensity and the fluorescence lifetime of Tb(III) were decreased as increasing the concentration of Nd(III), demonstrating collisional quenching between donor ions and acceptor ions. The Forster distance (..0) of Tb(III)-Nd(III) binary system in molten LiCl-KCl eutectic was determined in the specific range of .... (0.1-1.0) and .. (1.387-1.496)

DESY III, the new proton injector for HERA

International Nuclear Information System (INIS)

Hemmie, G.; Maidment, J.R.

1987-01-01

The design of a 7.5 GeV/c proton synchrotron, DESY III, which will form part of the injector chain for HERA /1/ is described. Features of the latice and brief details of sub-systems are presented. A selection of parameters and expected time schedule for the accelerator which is at present under construction at the DESY laboratory, Hamburg, are given

Neodymium Recovery by Chitosan/Iron(III Hydroxide [ChiFer(III] Sorbent Material: Batch and Column Systems

Directory of Open Access Journals (Sweden)

Hary Demey

2018-02-01

Full Text Available A low cost composite material was synthesized for neodymium recovery from dilute aqueous solutions. The in-situ production of the composite containing chitosan and iron(III hydroxide (ChiFer(III was improved and the results were compared with raw chitosan particles. The sorbent was characterized using Fourier transform infrared spectroscopy (FTIR and scanning electron microscopy-energy dispersive X-ray analyses (SEM-EDX. The equilibrium studies were performed using firstly a batch system, and secondly a continuous system. The sorption isotherms were fitted with the Langmuir, Freundlich, and Sips models; experimental data was better described with the Langmuir equation and the maximum sorption capacity was 13.8 mg g-1 at pH 4. The introduction of iron into the biopolymer matrix increases by four times the sorption uptake of the chitosan; the individual sorption capacity of iron (into the composite was calculated as 30.9 mg Nd/g Fe. The experimental results of the columns were fitted adequately using the Thomas model. As an approach to Nd-Fe-B permanent magnets effluents, a synthetic dilute effluent was simulated at pH 4, in order to evaluate the selectivity of the sorbent material; the overshooting of boron in the column system confirmed the higher selectivity toward neodymium ions. The elution step was carried out using MilliQ-water with the pH set to 3.5 (dilute HCl solution.

Validation of the U.S. NRC coupled code system TRITON/TRACE/PARCS with the special power excursion reactor test III (SPERT III)

Energy Technology Data Exchange (ETDEWEB)

Wang, R. C.; Xu, Y.; Downar, T. [Dept. of Nuclear Engineering and Radiological Sciences, Univ. of Michigan, Ann Arbor, MI 48104 (United States); Hudson, N. [RES Div., U.S. NRC, Rockville, MD (United States)

2012-07-01

The Special Power Excursion Reactor Test III (SPERT III) was a series of reactivity insertion experiments conducted in the 1950's. This paper describes the validation of the U.S. NRC Coupled Code system TRITON/PARCS/TRACE to simulate reactivity insertion accidents (RIA) by using several of the SPERT III tests. The work here used the SPERT III E-core configuration tests in which the RIA was initiated by ejecting a control rod. The resulting super-prompt reactivity excursion and negative reactivity feedback produced the familiar bell shaped power increase and decrease. The energy deposition during such a power peak has important safety consequences and provides validation basis for core coupled multi-physics codes. The transients of five separate tests are used to benchmark the PARCS/TRACE coupled code. The models were thoroughly validated using the original experiment documentation. (authors)

Complexation of trivalent actinides and lanthanides with hydrophilic N-donor ligands for Am(III)/Cm(III) and An(III)/Ln(III) separation; Komplexierung von trivalenten Actiniden und Lanthaniden mit hydrophilen N-Donorliganden zur Am(III)/Cm(III)- bzw. An(III)/Ln(III)-Trennung

Energy Technology Data Exchange (ETDEWEB)

Wagner, Christoph

2017-07-24

the hydration, resulting in more negative reaction enthalpies of the complexation in acidic media. Utilizing absorption spectroscopy, the formation of the [Am(SO{sub 3}-Ph-BTBP){sub 2}]{sup 5-} complex was quantified. The conditional stability constant of this complex is by Δlogβ{sub 2} = 0.2 larger than of the analogous Cm(III) complex. This is in excellent agreement with the separation factor derived from solvent extraction (SF{sub Cm(III)/Am(III)} = 1.6). Solvent extraction studies were performed in the SO{sub 3}-Ph-BTBP/TODGA system (N,N,N{sup '},N{sup '}-tetraoctyl-diglycolamide) at varied nitric acid concentration, SO{sub 3}-Ph-BTBP concentration and temperature, demonstrating the separation of Am(III) from Cm(III) and the light Ln(III) with separation factors of SF{sub Cm(III)/Am(III)} = 2.6-3.0 and SF{sub Eu(III)/Am(III)} up to 1100. Furthermore, the selectivity of the SO{sub 3}-Ph-BTBP/TODGA system is not affected by Eu(III) concentrations of 2 - 15 mmol/L or by hydrolysis after contact with nitric acid for several weeks. Radiolytic degradation occuring at α doses > 10 kGy, however, limits the recycling of SO{sub 3}-Ph-BTBP. In case of SO{sub 3}-Ph-BTPhen (tetrasodium 3,3{sup '},3'',3{sup '''}-((1,10-phenanthroline-2,9-diyl)bis (1,2,4-triazine-3,5,6-triyl)tetrabenzenesulfonate) the coordinating nitrogen atoms of the pyridine moieties of SO{sub 3}-Ph-BTBP are fixed in cis position by the phenantroline moiety. This results in increased complex stability for lipophilic derivatives. However, TRLFS studies on SO{sub 3}-Ph-BTPhen and SO{sub 3}-Ph-BTBP in aqueous solution at pH 3 showed that the preorganization has no significant impact on the stability of the formed complexes. Due to the lower pK{sub a} of SO{sub 3}-Ph-BTPhen the logβ{sub 2} values in acidic media are higher than for SO{sub 3}-Ph-BTBP. The selectivity of the complexing agent, however, remains unaltered. The Cm(III) and Eu(III) 1:1 complexes formed with

BASEL III – IMPLICATIONS OF THE NEW AGREEMENT UPON THE BANKING SYSTEMS

OpenAIRE

VLADA RAMONA IOANA; BANU IOANA MADALINA

2013-01-01

Global banking crisis generated by the subprime crisis in the U.S., received in December 2010, as a response from the Committee on Banking Supervision of the Bank for International Settlements, new capital adequacy rules for banks under the Basel III title: International framework for measurement, standardization and monitoring of liquidity risk, and Basel III: A global regulatory framework for banks and a sounder banking system with new capital adequacy rules for banks. These regulations are...

Bile salt receptor complex activates a pathogenic type III secretion system

Science.gov (United States)

Li, Peng; Rivera-Cancel, Giomar; Kinch, Lisa N; Salomon, Dor; Tomchick, Diana R; Grishin, Nick V; Orth, Kim

2016-01-01

Bile is an important component of the human gastrointestinal tract with an essential role in food absorption and antimicrobial activities. Enteric bacterial pathogens have developed strategies to sense bile as an environmental cue to regulate virulence genes during infection. We discovered that Vibrio parahaemolyticus VtrC, along with VtrA and VtrB, are required for activating the virulence type III secretion system 2 in response to bile salts. The VtrA/VtrC complex activates VtrB in the presence of bile salts. The crystal structure of the periplasmic domains of the VtrA/VtrC heterodimer reveals a β-barrel with a hydrophobic inner chamber. A co-crystal structure of VtrA/VtrC with bile salt, along with biophysical and mutational analysis, demonstrates that the hydrophobic chamber binds bile salts and activates the virulence network. As part of a family of conserved signaling receptors, VtrA/VtrC provides structural and functional insights into the evolutionarily conserved mechanism used by bacteria to sense their environment. DOI: http://dx.doi.org/10.7554/eLife.15718.001 PMID:27377244

Bile salt receptor complex activates a pathogenic type III secretion system

Energy Technology Data Exchange (ETDEWEB)

Li, Peng; Rivera-Cancel, Giomar; Kinch, Lisa N.; Salomon, Dor; Tomchick, Diana R.; Grishin, Nick V.; Orth, Kim

2016-07-05

Bile is an important component of the human gastrointestinal tract with an essential role in food absorption and antimicrobial activities. Enteric bacterial pathogens have developed strategies to sense bile as an environmental cue to regulate virulence genes during infection. We discovered thatVibrio parahaemolyticusVtrC, along with VtrA and VtrB, are required for activating the virulence type III secretion system 2 in response to bile salts. The VtrA/VtrC complex activates VtrB in the presence of bile salts. The crystal structure of the periplasmic domains of the VtrA/VtrC heterodimer reveals a β-barrel with a hydrophobic inner chamber. A co-crystal structure of VtrA/VtrC with bile salt, along with biophysical and mutational analysis, demonstrates that the hydrophobic chamber binds bile salts and activates the virulence network. As part of a family of conserved signaling receptors, VtrA/VtrC provides structural and functional insights into the evolutionarily conserved mechanism used by bacteria to sense their environment.

An ultrahigh vacuum, low-energy ion-assisted deposition system for III-V semiconductor film growth

Science.gov (United States)

Rohde, S.; Barnett, S. A.; Choi, C.-H.

1989-06-01

A novel ion-assisted deposition system is described in which the substrate and growing film can be bombarded with high current densities (greater than 1 mA/sq cm) of very low energy (10-200 eV) ions. The system design philosophy is similar to that used in III-V semiconductor molecular-beam epitaxy systems: the chamber is an all-metal ultrahigh vacuum system with liquid-nitrogen-cooled shrouds, Knudsen-cell evaporation sources, a sample insertion load-lock, and a 30-kV reflection high-energy electron diffraction system. III-V semiconductor film growth is achieved using evaporated group-V fluxes and group-III elemental fluxes sputtered from high-purity targets using ions extracted from a triode glow discharge. Using an In target and an As effusion cell, InAs deposition rates R of 2 microns/h have been obtained. Epitaxial growth of InAs was observed on both GaSb(100) and Si(100) substrates.

PLN's experience with the WASP-III model in generation expansion planning for the Java system

International Nuclear Information System (INIS)

Sudja, N.; Afiff, A.; Simarmata, B.

1988-01-01

The State Electric Power Corporation of Indonesia (PLN) was one of the first recipients of the WASP computer model, and since 1976 has been using the model (first the version WASP-II, and later the WASP-III version) for carrying out generation expansion planning studies for the country, and particularly, for the Java power system. This paper discusses PLN's experience with WASP-III and comments on some problems and constraints encountered, particularly: the time-fixed forced outage rate (FOR) assumed for generating units, simulation of the hydro system and computation time. The paper concludes with some suggestions about future enhancements to WASP-III. (author). 3 figs, 11 tabs

PACE. A Program for Acquiring Competence in Entrepreneurship. Part III: Being an Entrepreneur. Unit B: Financial Management. Research and Development Series No. 194 C-2.

Science.gov (United States)

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the eight instructional units in Part III is operating a business. Unit B focuses on good financial management…

PACE. A Program for Acquiring Competence in Entrepreneurship. Part III: Being an Entrepreneur. Unit H: Business Protection. Research and Development Series No. 194 C-8.

Science.gov (United States)

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the eight instructional units in part III is operating a business. Unit H focuses on business protection. It…

PACE. A Program for Acquiring Competence in Entrepreneurship. Part III: Being an Entrepreneur. Unit G: Community Relations. Research and Development Series No. 194 C-7.

Science.gov (United States)

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups of vocational teacher education. The emphasis of the eight instructional units in Part III is operating a business. Unit G focuses on community relations. It…

PACE. A Program for Acquiring Competence in Entrepreneurship. Part III: Being an Entrepreneur. Unit D: Marketing Management. Research and Development Series No. 194 C-4.

Science.gov (United States)

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the eight instructional units in Part III is operating a business. Unit D focuses on market management. It…

Division III Student-Athletes' Experiences of Institutional Social and Academic Systems

Science.gov (United States)

Becht, Louis A., Jr.

2017-01-01

The purpose of this qualitative study was to expand the literature on Division III student-athletes by examining their integration into the social and academic systems at one institution located in northeastern United States. This study examined participants' experiences within institutional social and academic systems designed for…

17 CFR Table III to Subpart E of... - Civil Monetary Penalty Inflation Adjustments

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Civil Monetary Penalty Inflation Adjustments III Table III to Subpart E of Part 201 Commodity and Securities Exchanges SECURITIES..., Table III Table III to Subpart E of Part 201—Civil Monetary Penalty Inflation Adjustments U.S. Code...

PACE. A Program for Acquiring Competence in Entrepreneurship. Part III: Being an Entrepreneur. Unit E: Successful Selling. Research and Development Series No. 194 C-5.

Science.gov (United States)

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the eight instructional units in Part III is operating a business. Unit E focuses on personal (face-to-face)…

Thermodynamic data for predicting concentrations of Pu(III), Am(III), and Cm(III) in geologic environments

Energy Technology Data Exchange (ETDEWEB)

Rai, Dhanpat; Rao, Linfeng; Weger, H.T.; Felmy, A.R. [Pacific Northwest National Laboratory, WA (United States); Choppin, G.R. [Florida State University, Florida (United States); Yui, Mikazu [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai, Ibaraki (Japan)

1999-01-01

This report provides thermodynamic data for predicting concentrations of Pu(III), Am(III), and Cm(III) in geologic environments, and contributes to an integration of the JNC chemical thermodynamic database, JNC-TDB (previously PNC-TDB), for the performance analysis of geological isolation system for high-level radioactive wastes. Thermodynamic data for the formation of complexes or compounds with hydroxide, chloride, fluoride, carbonate, nitrate, sulfate and phosphate are discussed in this report. Where data for specific actinide(III) species are lacking, the data were selected based on chemical analogy to other trivalent actinides. In this study, the Pitzer ion-interaction model is mainly used to extrapolate thermodynamic constants to zero ionic strength at 25degC. (author)

Moessbauer studies of iron(III)-(indole-3-alkanoic acids) systems in frozen aqueous solutions

International Nuclear Information System (INIS)

Kovacs, K.; Kuzmann, E.; Homonnay, Z.; Szilagyi, P.A.; Vertes, A.; Kamnev, A.A.; Sharma, V.K.

2005-01-01

Moessbauer investigations of iron(III) salts in aqueous solutions in the presence of indole-3-alkanoic acid ligands are described. The measurements showed two parallel reactions between the ligands and ferric ions: a complex formation and a redox process. The oxidation process takes place in the ligands, and a part of Fe 3+ is reduced to Fe 2+ . (author)

Acceptance test procedure, 241-SY-101 Flexible Receiver System, Phase III testing

International Nuclear Information System (INIS)

Ritter, G.A.

1994-01-01

This Acceptance Test Procedure is for the 241-SY-101 Flexible Receiver System, Phase III Testing. This procedure will test the sealing integrity of the Flexible Receiver System to ensure that release of waste and aerosols will be minimized during the removal of the test mixer pump from tank SY-101

FEMSYN - a code system to solve multigroup diffusion theory equations using a variety of solution techniques. Part 1 : Description of code system - input and sample problems

International Nuclear Information System (INIS)

Jagannathan, V.

1985-01-01

A modular computer code system called FEMSYN has been developed to solve the multigroup diffusion theory equations. The various methods that are incorporated in FEMSYN are (i) finite difference method (FDM) (ii) finite element method (FEM) and (iii) single channel flux synthesis method (SCFS). These methods are described in detail in parts II, III and IV of the present report. In this report, a comparison of the accuracy and the speed of different methods of solution for some benchmark problems are reported. The input preparation and listing of sample input and output are included in the Appendices. The code FEMSYN has been used to solve a wide variety of reactor core problems. It can be used for both LWR and PHWR applications. (author)

BASEL III – IMPLICATIONS OF THE NEW AGREEMENT UPON THE BANKING SYSTEMS

Directory of Open Access Journals (Sweden)

VLADA RAMONA IOANA

2013-12-01

Full Text Available Global banking crisis generated by the subprime crisis in the U.S., received in December 2010, as a response from the Committee on Banking Supervision of the Bank for International Settlements, new capital adequacy rules for banks under the Basel III title: International framework for measurement, standardization and monitoring of liquidity risk, and Basel III: A global regulatory framework for banks and a sounder banking system with new capital adequacy rules for banks. These regulations are the focus of global financial reform to prevent future occurrence of banking crises.

Safety systems and safety analysis of the Qinshan phase III CANDU nuclear power plant

International Nuclear Information System (INIS)

Cai Jianping; Shen Sen; Barkman, N.

1999-01-01

The author introduces the Canadian nuclear reactor safety philosophy and the Qinshan Phase III CANDU NPP safety systems and safety analysis, which are designed and performed according to this philosophy. The concept of 'defence-in-depth' is a key element of the Canadian nuclear reactor safety philosophy. The design concepts of redundancy, diversity, separation, equipment qualification, quality assurance, and use of appropriate design codes and standards are adopted in the design. Four special safety systems as well as a set of reliable safety support systems are incorporated in the design of Qinshan phase III CANDU for accident mitigation. The assessment results for safety systems performance show that the fundamental safety criteria for public dose, and integrity of fuel, channels and the reactor building, are satisfied

PACE. A Program for Acquiring Competence in Entrepreneurship. Part III: Being an Entrepreneur. Unit F: Managing Human Resources. Research and Development Series No. 194 C-6.

Science.gov (United States)

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-level colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the eight instructional units in Part III is operating a business. Unit F focuses on proper management of human…

PACE. A Program for Acquiring Competence in Entrepreneurship. Part III: Being an Entrepreneur. Unit A: Managing the Business. Research and Development Series No. 194 C-1.

Science.gov (United States)

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the eight instructional units in Part III is operating a business. Unit A focuses on the management process. It…

Simulation model for wind energy storage systems. Volume III. Program descriptions. [SIMWEST CODE

Energy Technology Data Exchange (ETDEWEB)

Warren, A.W.; Edsinger, R.W.; Burroughs, J.D.

1977-08-01

The effort developed a comprehensive computer program for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic). An acronym for the program is SIMWEST (Simulation Model for Wind Energy Storage). The level of detail of SIMWEST is consistent with a role of evaluating the economic feasibility as well as the general performance of wind energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. Volume III, the SIMWEST program description contains program descriptions, flow charts and program listings for the SIMWEST Model Generation Program, the Simulation program, the File Maintenance program and the Printer Plotter program. Volume III generally would not be required by SIMWEST user.

Predicting Efficient Antenna Ligands for Tb(III) Emission

Energy Technology Data Exchange (ETDEWEB)

Samuel, Amanda P.S.; Xu, Jide; Raymond, Kenneth

2008-10-06

A series of highly luminescent Tb(III) complexes of para-substituted 2-hydroxyisophthalamide ligands (5LI-IAM-X) has been prepared (X = H, CH{sub 3}, (C=O)NHCH{sub 3}, SO{sub 3}{sup -}, NO{sub 2}, OCH{sub 3}, F, Cl, Br) to probe the effect of substituting the isophthalamide ring on ligand and Tb(III) emission in order to establish a method for predicting the effects of chromophore modification on Tb(III) luminescence. The energies of the ligand singlet and triplet excited states are found to increase linearly with the {pi}-withdrawing ability of the substituent. The experimental results are supported by time-dependent density functional theory (TD-DFT) calculations performed on model systems, which predict ligand singlet and triplet energies within {approx}5% of the experimental values. The quantum yield ({Phi}) values of the Tb(III) complex increases with the triplet energy of the ligand, which is in part due to the decreased non-radiative deactivation caused by thermal repopulation of the triplet. Together, the experimental and theoretical results serve as a predictive tool that can be used to guide the synthesis of ligands used to sensitize lanthanide luminescence.

Expression and Quorum Sensing Regulation of Type III Secretion System Genes of Vibrio harveyi during Infection of Gnotobiotic Brine Shrimp.

Directory of Open Access Journals (Sweden)

H A Darshanee Ruwandeepika

Full Text Available Type III secretion systems enable pathogens to inject their virulence factors directly into the cytoplasm of the host cells. The type III secretion system of Vibrio harveyi, a major pathogen of aquatic organisms and a model species in quorum sensing studies, is repressed by the quorum sensing master regulator LuxR. In this study, we found that during infection of gnotobiotic brine shrimp larvae, the expression levels of three type III secretion operons in V. harveyi increased within the first 12h after challenge and decreased again thereafter. The in vivo expression levels were highest in a mutant with a quorum sensing system that is locked in low cell density configuration (minimal LuxR levels and lowest in a mutant with a quorum sensing system that is locked in the high cell density configuration (maximal LuxR levels, which is consistent with repression of type III secretion by LuxR. Remarkably, in vivo expression levels of the type III secretion system genes were much (> 1000 fold higher than the in vitro expression levels, indicating that (currently unknown host factors significantly induce the type III secretion system. Given the fact that type III secretion is energy-consuming, repression by the quorum sensing master regulators might be a mechanism to save energy under conditions where it does not provide an advantage to the cells.

The application and design of distributed control system in reactor shutdown system of Qinshan phase III

International Nuclear Information System (INIS)

Su Guoquan; Liu Wangtian; Yu Yijun; Xiong Weihua

2006-03-01

The design, commissioning and running of the reactor trip parameter monitoring system used in Qinshan Phase III are introduced. The applying technology of Distributed Control System realized trip parameter monitoring and realized the function of trip parameters quick data acquisitioning, transferring, saving, alarm, query. The applying of trip parameters monitoring system improved the abilities of plant status monitoring and event analyzing, and increased the security and economy of nuclear power plant. (authors)

A Study of Future Communications Concepts and Technologies for the National Airspace System-Part III

Science.gov (United States)

Ponchak, Denise S.; Apaza, Rafael D.; Wichgersm Joel M.; Haynes, Brian; Roy, Aloke

2014-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is investigating current and anticipated wireless communications concepts and technologies that the National Airspace System (NAS) may need in the next 50 years. NASA has awarded three NASA Research Announcements (NAR) studies with the objective to determine the most promising candidate technologies for air-to-air and air-to-ground data exchange and analyze their suitability in a post-NextGen NAS environment. This paper will present progress made in the studies and describe the communications challenges and opportunities that have been identified as part of the study. NASA's NextGen Concepts and Technology Development (CTD) Project integrates solutions for a safe, efficient and high-capacity airspace system through joint research efforts and partnerships with other government agencies. The CTD Project is one of two within NASA's Airspace Systems Program and is managed by the NASA Ames Research Center. Research within the CTD Project is in support the 2011 NASA Strategic Plan Sub-Goal 4.1: Develop innovative solutions and advanced technologies, through a balanced research portfolio, to improve current and future air transportation. The focus of CTD is on developing capabilities in traffic flow management, dynamic airspace configuration, separation assurance, super density operations and airport surface operations. Important to its research is the development of human/automation information requirements and decisionmaking guidelines for human-human and human-machine airportal decision-making. Airborne separation, oceanic intrail climb/descent and interval management applications depend on location and intent information of surrounding aircraft. ADS-B has been proposed to provide the information exchange, but other candidates such as satellite-based receivers, broadband or airborne internet, and cellular communications are possible candidate's.

SPSP Phase III Recruiting, Selecting, and Developing Secure Power Systems Professionals. Job Profiles

Energy Technology Data Exchange (ETDEWEB)

O' Neil, Lori Ross [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Conway, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tobey, D. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Greitzer, Frank L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dalton, Angela C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pusey, Portia K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-03-01

The Secure Power Systems Professional Phase III final report was released last year which an appendix of Job Profiles. This new report is that appendix broken out as a standalone document to assist utilities in recruiting and developing Secure Power Systems Professionals at their site.

Stage III nasopharyngeal angiofibroma: Improving results with endoscopic-assisted midfacial degloving and modification to the Fisch staging system.

Science.gov (United States)

Shah, Saurin R; Keshri, Amit; Patadia, Simple; Sahu, Rabi Narayan; Srivastava, Arun Kumar; Behari, Sanjay

2015-10-01

To study outcomes with endoscopic-assisted midfacial degloving for Fisch stage III nasopharyngeal angiofibroma and propose a new staging system. Retrospective study of patients with Fisch stage III juvenile nasopharyngeal angiofibroma (JNA) including preoperative angiography, intraoperative blood loss and residue/recurrence following surgery. Tertiary care superspecialty referral center. Fifteen consecutive patients with Fisch stage III JNA undergoing operations over a period of 18 months. Preoperative angiography details, intraoperative blood loss, residue/recurrence, complications of surgery. Transarterial embolization with particulate agents followed by endoscopic-assisted midfacial degloving provides excellent outcomes with Fisch stage III JNAs. The modified Fisch staging system proposed would allow better preoperative evaluation and comparison of outcomes with different treatment options for stage III JNAs. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Core sampling system spare parts assessment

International Nuclear Information System (INIS)

Walter, E.J.

1995-01-01

Soon, there will be 4 independent core sampling systems obtaining samples from the underground tanks. It is desirable that these systems be available for sampling during the next 2 years. This assessment was prepared to evaluate the adequacy of the spare parts identified for the core sampling system and to provide recommendations that may remediate overages or inadequacies of spare parts

Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

Energy Technology Data Exchange (ETDEWEB)

Mishra, A; Singh, M P; Singh, V K

1982-05-01

The nitrato-complexes, (Y(PyBzH)/sub 2/(NO/sub 3/)/sub 2/)NO/sub 3/.H/sub 2/O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole) are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm/sup -1/cm/sup 2/mol/sup -1/) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the positive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C/sub 2/v) and uncoordinated (D/sub 3/h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms.

Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

International Nuclear Information System (INIS)

Mishra, A.; Singh, M.P.; Singh, V.K.

1982-01-01

The nitrato-complexes, [Y(PyBzH) 2 (NO 3 ) 2 ]NO 3 .H 2 O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole] are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm -1 cm 2 mol -1 ) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the terpositive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C 2 v) and uncoordinated (D 3 h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms. (author)

Eighth annual meeting, Vienna, Austria, 15-18 April 1975. Summary report. Part III

International Nuclear Information System (INIS)

1976-01-01

The Summary Report of the Eighth Annual Meeting of the International Working Group on Fast Reactors contains the minutes of the meeting (Part 1); papers which review the national programmes in the field of LMFBRs (Part 2) and the discussions on the review of national programmes (Part 3). The agenda of the meeting involved design, construction, operating experiences of demonstration fast power reactors, reprocessing of spent fuel from LMFBRs, reliability of decay heat removal systems, fuel failure mechanisms, safety of LMFBRs

Eighth annual meeting, Vienna, Austria, 15-18 April 1975. Summary report. Part III

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-01-01

The Summary Report of the Eighth Annual Meeting of the International Working Group on Fast Reactors contains the minutes of the meeting (Part 1); papers which review the national programmes in the field of LMFBRs (Part 2) and the discussions on the review of national programmes (Part 3). The agenda of the meeting involved design, construction, operating experiences of demonstration fast power reactors, reprocessing of spent fuel from LMFBRs, reliability of decay heat removal systems, fuel failure mechanisms, safety of LMFBRs.

Providing for energy efficiency in homes and small buildings. Part III. Determining which practices are most effective and installing materials

Energy Technology Data Exchange (ETDEWEB)

None

1980-06-01

The training program is designed to educate students and individuals in the importance of conserving energy and to provide for developing skills needed in the application of energy-saving techniques that result in energy-efficient buildings. A teacher guide and student workbook are available to supplement the basic manual. Subjects covered in Part III are: determining which practices are most efficient and economical; installing energy-saving materials; and improving efficiency of equipment.

BOLD VENTURE COMPUTATION SYSTEM for nuclear reactor core analysis, Version III

International Nuclear Information System (INIS)

Vondy, D.R.; Fowler, T.B.; Cunningham, G.W. III.

1981-06-01

This report is a condensed documentation for VERSION III of the BOLD VENTURE COMPUTATION SYSTEM for nuclear reactor core analysis. An experienced analyst should be able to use this system routinely for solving problems by referring to this document. Individual reports must be referenced for details. This report covers basic input instructions and describes recent extensions to the modules as well as to the interface data file specifications. Some application considerations are discussed and an elaborate sample problem is used as an instruction aid. Instructions for creating the system on IBM computers are also given

BOLD VENTURE COMPUTATION SYSTEM for nuclear reactor core analysis, Version III

Energy Technology Data Exchange (ETDEWEB)

Vondy, D.R.; Fowler, T.B.; Cunningham, G.W. III.

1981-06-01

This report is a condensed documentation for VERSION III of the BOLD VENTURE COMPUTATION SYSTEM for nuclear reactor core analysis. An experienced analyst should be able to use this system routinely for solving problems by referring to this document. Individual reports must be referenced for details. This report covers basic input instructions and describes recent extensions to the modules as well as to the interface data file specifications. Some application considerations are discussed and an elaborate sample problem is used as an instruction aid. Instructions for creating the system on IBM computers are also given.

Species dependent radiotracer study of Cr(VI) and Cr(III) using an aqueous biphasic system

Energy Technology Data Exchange (ETDEWEB)

Roy, K.; Lahiri, S. [Chemical Sciences Div., Saha Inst. of Nuclear Physics, Kolkata (India)

2008-07-01

The speciation study of Cr(III) and Cr(VI) was carried out using a polyethylene glycol (PEG) based aqueous biphasic extraction system (ABS). Neutron activated Cr(III) and Cr(VI) salts were assayed in a HPGe detector before and after employing aqueous biphasic extraction. Different salts of various salting out abilities were taken as the salt rich phase. The best condition for extraction of Cr(VI) and the maximum differential attitude of ABS to Cr(VI) and Cr(III) was observed when 2 M Na{sub 2}SO{sub 4} and PEG 4000 (50% w/w) solutions were used. Cr(III) can also be extracted by the PEG with prior complexation with diphenylthiocarbazone (dithizone). The chromium dithizonate complex is quantitatively extracted by the PEG rich phase. (orig.)

THE IMPACT OF THE BASEL III AGREEMENT ON THE BANKING SYSTEMS

OpenAIRE

Magdalena RADULESCU

2014-01-01

In the light of the current financial crisis, some deficiencies of the financial supervision system were highlighted. The former Basel II Agreement needed to be reformulated to achieve more stability of the banking systems. The new Basel III launched tight regulation regarding both banking solvency and liquidity and the leverage ratio. These regulations imply more costs for banks. Many bankers didn’t agree because of the decrease of the profitability of banks. Still, even the current crisis w...

Comparison with experiment of COMETHE III-L fuel rod behaviour predictions

International Nuclear Information System (INIS)

Vliet, J. van; Billaux, M.

1983-01-01

A comparison is presented between experimental results and COMETHE III-L fuel rod behaviour predictions. The first part of the paper focuses on mechanical aspects, with as main experiments, AECL X-264 and Studsvik Interramp. The second part presents the results of a wide FGR benchmarking campaign, with a reference to previous COMETHE versions. It appears that the variance between experiment and calculation has decreased by a factor four when the III-J version was improved into the III-L version. As conclusion, some COMETHE III-L calculations are presented in order to illustrate its capability of predicting fuel rod performance limits. (author)

The type III protein secretion system contributes to Xanthomonas citri subsp. citri biofilm formation

KAUST Repository

Zimaro, Tamara; Thomas, Ludivine; Marondedze, Claudius; Sgro, Germá n G; Garofalo, Cecilia G; Ficarra, Florencia A; Gehring, Christoph A; Ottado, Jorgelina; Gottig, Natalia

2014-01-01

Background: Several bacterial plant pathogens colonize their hosts through the secretion of effector proteins by a Type III protein secretion system (T3SS). The role of T3SS in bacterial pathogenesis is well established but whether this system

Acuity and case management: a healthy dose of outcomes, part III.

Science.gov (United States)

Huber, Diane L; Craig, Kathy

2007-01-01

This is the third of a 3-part series presenting 2 effective applications--acuity and dosage--that describe how the business case for case management (CM) can be made. In Part I, dosage and acuity concepts were explained as client need-severity, CM intervention-intensity, and CM activity-dose prescribed by amount, frequency, duration, and breadth of activities. Concepts were presented that related the practice of CM to the use of evidence-based practice (EBP), knowledge, and methods and the development of instruments that measure and score pivotal CM actions. Part I also featured a specific exemplar, the CM Acuity Tool, and described how to use acuity to identify and score the complexity of a CM case. Part II further explained dosage and 2 acuity instruments, the Acuity Tool and AccuDiff. Part III presents linkage to EBP and practical applications. The information contained in the 3-part series applies to all CM practice settings and contains ideas and recommendations useful to CM generalists, specialists, supervisors, and business and outcomes managers. The Acuity Tools Project was developed from frontline CM practice in one large, national telephonic CM company. Dosage: A literature search failed to find research into dosage of a behavioral intervention. The Huber-Hall model was developed and tested in a longitudinal study of CM models in substance abuse treatment and reported in the literature. Acuity: A structured literature search and needs assessment launched the development of the suite of acuity tools. A gap analysis identified that an instrument to assign and measure case acuity specific to CM activities was needed. Clinical experts, quality specialists, and business analysts (n = 7) monitored the development and testing of the tools, acuity concepts, scores, differentials, and their operating principles and evaluated the validity of the acuity tools' content related to CM activities. During the pilot phase of development, interrater reliability testing of

TRLIFS study of Eu(III) spectroscopic properties to obtain structural and thermodynamic informations on lanthanide-malonamide complexes in the Eu(III)/NaNO3/tetraethylmalonamide system

International Nuclear Information System (INIS)

Couston, L.; Charbonnel, M.C.; Flandin, J.L.; Rancier, F.; Moulin, C.

2004-01-01

Improvement of the nuclear fuel reprocessing involves separating the minor actinides (Am(III) and Cm(III)) from the fission products. In the French strategy, the first step consists in the separation of the trivalent actinides and lanthanides from high-level liquid waste, for which malonamides RR'NCO(CHR '' )CONRR' are promising ligands. These molecules have been optimized for reprocessing but still require basic chemical studies to describe the complexation mechanisms at a molecular scale. This paper discusses a thermodynamic and structural study of a Ln(III)-malonamide complex formed with the hydrosoluble tetraethylmalonamide ligand (TEMA = (C 2 H 5 ) 2 NCOCH 2 CON(C 2 H 5 ) 2 ) dissolved in a nitrate medium. Despite the simplified chemical system obtained with TEMA, its weak chemical affinity and its physical properties pushed the analytical techniques to their limits. The sensitivity of time-resolved laser-induced fluorescence spectroscopy (TRLIFS) combined with the major luminescent spectroscopic properties of Eu(III) (hypersensitive band and fluorescence lifetime) were successfully used to determine the equilibrium constant and hydration number in the Eu(III), TEMA, and NO 3 - system. Fluorescence lifetimes, connected with the first coordination sphere of the solvated metal, clearly show the inner-sphere location of nitrate in the Eu(NO 3 ) 2+ complex, the outer-sphere location of TEMA in the Eu(TEMA) 3+ complex, and the outer-sphere location of both ligands in the Eu(NO 3 )(TEMA) 2+ complex. (orig.)

Always one step ahead: How pathogenic bacteria use the type III secretion system to manipulate the intestinal mucosal immune system

Directory of Open Access Journals (Sweden)

Marchès Olivier

2011-05-01

Full Text Available Abstract The intestinal immune system and the epithelium are the first line of defense in the gut. Constantly exposed to microorganisms from the environment, the gut has complex defense mechanisms to prevent infections, as well as regulatory pathways to tolerate commensal bacteria and food antigens. Intestinal pathogens have developed strategies to regulate intestinal immunity and inflammation in order to establish or prolong infection. The organisms that employ a type III secretion system use a molecular syringe to deliver effector proteins into the cytoplasm of host cells. These effectors target the host cell cytoskeleton, cell organelles and signaling pathways. This review addresses the multiple mechanisms by which the type III secretion system targets the intestinal immune response, with a special focus on pathogenic E. coli.

Metallothionein (MT)-III

DEFF Research Database (Denmark)

Carrasco, J; Giralt, M; Molinero, A

1999-01-01

Metallothionein-III is a low molecular weight, heavy-metal binding protein expressed mainly in the central nervous system. First identified as a growth inhibitory factor (GIF) of rat cortical neurons in vitro, it has subsequently been shown to be a member of the metallothionein (MT) gene family...... injected rats. The specificity of the antibody was also demonstrated in immunocytochemical studies by the elimination of the immunostaining by preincubation of the antibody with brain (but not liver) extracts, and by the results obtained in MT-III null mice. The antibody was used to characterize...... the putative differences between the rat brain MT isoforms, namely MT-I+II and MT-III, in the freeze lesion model of brain damage, and for developing an ELISA for MT-III suitable for brain samples. In the normal rat brain, MT-III was mostly present primarily in astrocytes. However, lectin staining indicated...

Management strategies to effect change in intensive care units: lessons from the world of business. Part III. Effectively effecting and sustaining change.

Science.gov (United States)

Gershengorn, Hayley B; Kocher, Robert; Factor, Phillip

2014-03-01

Reaping the optimal rewards from any quality improvement project mandates sustainability after the initial implementation. In Part III of this three-part ATS Seminars series, we discuss strategies to create a culture for change, improve cooperation and interaction between multidisciplinary teams of clinicians, and position the intensive care unit (ICU) optimally within the hospital environment. Coaches are used throughout other industries to help professionals assess and continually improve upon their practice; use of this strategy is as of yet infrequent in health care, but would be easily transferable and potentially beneficial to ICU managers and clinicians alike. Similarly, activities focused on improving teamwork are commonplace outside of health care. Simulation training and classroom education about key components of successful team functioning are known to result in improvements. In addition to creating an ICU environment in which individuals and teams of clinicians perform well, ICU managers must position the ICU to function well within the hospital system. It is important to move away from the notion of a standalone ("siloed") ICU to one that is well integrated into the rest of the institution. Creating a "pull-system" (in which participants are active in searching out needed resources and admitting patients) can help ICU managers both provide better care for the critically ill and strengthen relationships with non-ICU staff. Although not necessary, there is potential upside to creating a unified critical care service to assist with achieving these ends.

Time-resolved studies at PETRA III with a highly repetitive synchronized laser system

Energy Technology Data Exchange (ETDEWEB)

Schlie, Mortiz

2013-09-15

Atomic and molecular processes can nowadays be directly followed in the time domain. This is a core technique for a better understanding of the involved fundamental physics, thus auguring new applications in the future as well. Usually the so-called pump-probe technique making use of two synchronized ultrashort light pulses is utilized to obtain this time-resolved data. In this work, the development and characterization of a synchronization system enabling such pump-probe studies at the storage ring PETRA III in combination with an external, then synchronized fs-laser system is described. The synchronization is based on an extended PLL approach with three interconnected feedback loops allowing to monitor short-time losses of the lock and thus prevent them. This way, the jitter between the laser PHAROS and the PETRA III reference signal is reduced to {sigma} <5 ps. Thus the system allows to conduct experiments at a repetition rate of 130 kHz with a temporal resolution limited only by the X-ray pulse length. A major emphasis in the fundamental introductory chapters is an intuitive explanation of the basic principles of phase locked loops and the different aspects of phase noise to allow a deeper understanding of the synchronization. Furthermore, first pump-probe experiments conducted at different beamlines at PETRA III are presented, demonstrating the usability of the laser system in a scientific environment as well. In first characterizing experiments the pulse duration of PETRA III X-ray pulses has been measured to be 90 ps FWHM. In particular, there have been time resolved X-ray absorption spectroscopy experiments on Gaq3 and Znq2 conducted at beamline P11. First results show dynamics of the electronic excitation on the timescale of a few hundred pico seconds up to a few nano seconds and provide a basic understanding for further research on those molecules. For Gaq3 this data is analyzed in detail and compared with visible fluorescence measurements suggesting at

Time-resolved studies at PETRA III with a highly repetitive synchronized laser system

International Nuclear Information System (INIS)

Schlie, Mortiz

2013-09-01

Atomic and molecular processes can nowadays be directly followed in the time domain. This is a core technique for a better understanding of the involved fundamental physics, thus auguring new applications in the future as well. Usually the so-called pump-probe technique making use of two synchronized ultrashort light pulses is utilized to obtain this time-resolved data. In this work, the development and characterization of a synchronization system enabling such pump-probe studies at the storage ring PETRA III in combination with an external, then synchronized fs-laser system is described. The synchronization is based on an extended PLL approach with three interconnected feedback loops allowing to monitor short-time losses of the lock and thus prevent them. This way, the jitter between the laser PHAROS and the PETRA III reference signal is reduced to σ <5 ps. Thus the system allows to conduct experiments at a repetition rate of 130 kHz with a temporal resolution limited only by the X-ray pulse length. A major emphasis in the fundamental introductory chapters is an intuitive explanation of the basic principles of phase locked loops and the different aspects of phase noise to allow a deeper understanding of the synchronization. Furthermore, first pump-probe experiments conducted at different beamlines at PETRA III are presented, demonstrating the usability of the laser system in a scientific environment as well. In first characterizing experiments the pulse duration of PETRA III X-ray pulses has been measured to be 90 ps FWHM. In particular, there have been time resolved X-ray absorption spectroscopy experiments on Gaq3 and Znq2 conducted at beamline P11. First results show dynamics of the electronic excitation on the timescale of a few hundred pico seconds up to a few nano seconds and provide a basic understanding for further research on those molecules. For Gaq3 this data is analyzed in detail and compared with visible fluorescence measurements suggesting at least

Stabilization through precipitation in a system of colloidal iron(III) pyrophosphate salts

NARCIS (Netherlands)

van Leeuwen, Y.M.; Velikov, K.P.; Kegel, W.K.

2012-01-01

The ionic strength of a solution decreases during the precipitation of an insoluble salt, which can cause an initially unstable colloidal system to stabilize during its formation. We show this effect in the precipitation and aging of colloidal iron(III) pyrophosphate, where we observe two distinct

What Are the Parts of the Nervous System?

Science.gov (United States)

... Email Print What are the parts of the nervous system? The nervous system consists of two main parts: the central nervous system and the peripheral nervous system: The central nervous system is made up of the brain and ...

BASEL III IMPACT ON ROMANIAN BANKING SYSTEM PERFORMANCE

Directory of Open Access Journals (Sweden)

Mariana G. NEDELCU (BUNEA

2014-04-01

Full Text Available In the context of economic and financial crisis triggered in EU by autumn 2008, Romania's banking system like that in the other European countries, faced with the consequences of decreasing the standard of living the worsening of purchasing power (in terms of retail and with gaps and Delay occurred in the payment of corporate clients. However the deteriorating the quality of bank investments, increasing non-performing loans in bank portfolios totate ultimately causing the accumulation of excessive risks that banks were exposed. On the background of the crisis, the impact of Basel III is not only a financial regulation that is applicable to the banking industry and will fundamentally determine the profitability of the banking system. Through this study, we propose a series of measures applicable to the credit institutions to mitigate the impact of alignment with the new capital requirements.

Endocrine system: part 1.

Science.gov (United States)

Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

2014-05-27

This article, which forms part of the life sciences series and is the first of two articles on the endocrine system, examines the structure and function of the organs of the endocrine system. It is important that nurses understand how the endocrine system works and its role in maintaining health. The role of the endocrine system and the types, actions and control of hormones are explored. The gross structure of the pituitary and thyroid glands are described along with relevant physiology. Several disorders of the thyroid gland are outlined. The second article examines growth hormone, the pancreas and adrenal glands.

Oral Assessment Kit, Levels II & III. Draft.

Science.gov (United States)

Agrelo-Gonzalez, Maria; And Others

The assessment packet includes a series of oral tests to help develop speaking as an integral part of second language instruction at levels II and III. It contains: 8 mini-tests for use at level II; 9 mini-tests for use at level III; a rating scale and score sheet masters for evaluating performance on these tests; and a collection of suggested…

Radiobiology in clinical radiation therapy - Part III: Normal tissue damage

International Nuclear Information System (INIS)

Travis, Elizabeth L.

1996-01-01

Objective: This is the third part of a course designed for residents in radiation oncology preparing for their boards. This part of the course will focus on the mechanisms underlying damage in normal tissues. Although conventional wisdom long held that killing and depletion of a critical cell(s) in a tissue was responsible for the later expression of damage, histopathologic changes in normal tissue can now be explained and better understood in terms of the new molecular biology. The concept that depletion of a single cell type is responsible for the observed histopathologic changes in normal tissues has been replaced by the hypothesis that damage results from the interaction of many different cell systems, including epithelial, endothelial, macrophages and fibroblasts, via the production of specific autocrine, paracrine and endocrine growth factors. A portion of this course will discuss the clinical and experimental data on the production and interaction of those cytokines and cell systems considered to be critical to tissue damage. It had long been suggested that interindividual differences in radiation-induced normal tissue damage was genetically regulated, at least in part. Both clinical and experimental data supported this hypothesis but it is the recent advances in human and mouse molecular genetics which have provided the tools to dissect out the genetic component of normal tissue damage. These data will be presented and related to the potential to develop genetic markers to identify sensitive individuals. The impact on clinical outcome of the ability to identify prospectively sensitive patients will be discussed. Clinically it is well-accepted that the volume of tissue irradiated is a critical factor in determining tissue damage. A profusion of mathematical models for estimating dose-volume relationships in a number of organs have been published recently despite the fact that little data are available to support these models. This course will review the

The TubR-centromere complex adopts a double-ring segrosome structure in Type III partition systems.

Science.gov (United States)

Martín-García, Bárbara; Martín-González, Alejandro; Carrasco, Carolina; Hernández-Arriaga, Ana M; Ruíz-Quero, Rubén; Díaz-Orejas, Ramón; Aicart-Ramos, Clara; Moreno-Herrero, Fernando; Oliva, María A

2018-05-14

In prokaryotes, the centromere is a specialized segment of DNA that promotes the assembly of the segrosome upon binding of the Centromere Binding Protein (CBP). The segrosome structure exposes a specific surface for the interaction of the CBP with the motor protein that mediates DNA movement during cell division. Additionally, the CBP usually controls the transcriptional regulation of the segregation system as a cell cycle checkpoint. Correct segrosome functioning is therefore indispensable for accurate DNA segregation. Here, we combine biochemical reconstruction and structural and biophysical analysis to bring light to the architecture of the segrosome complex in Type III partition systems. We present the particular features of the centromere site, tubC, of the model system encoded in Clostridium botulinum prophage c-st. We find that the split centromere site contains two different iterons involved in the binding and spreading of the CBP, TubR. The resulting nucleoprotein complex consists of a novel double-ring structure that covers part of the predicted promoter. Single molecule data provides a mechanism for the formation of the segrosome structure based on DNA bending and unwinding upon TubR binding.

THE IMPACT OF THE BASEL III AGREEMENT ON THE BANKING SYSTEMS

Directory of Open Access Journals (Sweden)

Magdalena RADULESCU

2014-06-01

Full Text Available In the light of the current financial crisis, some deficiencies of the financial supervision system were highlighted. The former Basel II Agreement needed to be reformulated to achieve more stability of the banking systems. The new Basel III launched tight regulation regarding both banking solvency and liquidity and the leverage ratio. These regulations imply more costs for banks. Many bankers didn’t agree because of the decrease of the profitability of banks. Still, even the current crisis wasn’t surpassed yet, the financial authorities have already claimed another improved agreement Basel IV.

Thermal sensation and comfort models for non-uniform and transient environments, part III: Whole-body sensation and comfort

Energy Technology Data Exchange (ETDEWEB)

Zhang, Hui; Arens, Edward; Huizenga, Charlie [Center for the Built Environment, UC Berkeley (United States); Han, Taeyoung [General Motors Company (United States)

2010-02-15

A three-part series presents the development of models for predicting the local thermal sensation (Part I) and local thermal comfort (Part II) of different parts of the human body, and also the whole-body sensation and comfort (Part III) that result from combinations of local sensation and comfort. The models apply to sedentary activities in a range of environments: uniform and non-uniform, stable and transient. They are based on diverse findings from the literature and from body-part-specific human subject tests in a climate chamber. They were validated against a test of automobile passengers. The series is intended to present the models' rationale, structure, and coefficients, so that others can test them and develop them further as additional empirical data becomes available. A) The whole-body (overall) sensation model has two forms, depending on whether all of the body's segments have sensations effectively in the same direction (e.g warm or cool), or whether some segments have sensations opposite to those of the rest of the body. For each, individual body parts have different weights for warm versus cool sensations, and strong local sensations dominate the overall sensation. If all sensations are near neutral, the overall sensation is close to the average of all body sensations. B) The overall comfort model also has two forms. Under stable conditions, people evaluate their overall comfort by a complaint-driven process, meaning that when two body parts are strongly uncomfortable, no matter how comfortable the other body parts might be, the overall comfort will be near the discomfort level of the two most uncomfortable parts. When the environmental conditions are transient, or people have control over their environments, overall comfort is better than that of the two most uncomfortable body parts. This can be accounted for by adding the most comfortable vote to the two most uncomfortable ones. (author)

Synthesis and photophysical properties of indium(III) phthalocyanine derivatives

Energy Technology Data Exchange (ETDEWEB)

Özceşmeci, İbrahim, E-mail: ozcesmecii@itu.edu.tr [Department of Chemistry, Technical University of Istanbul, Maslak 34469, Istanbul (Turkey); Gelir, Ali [Department of Physics, Technical University of Istanbul, Maslak 34469, Istanbul (Turkey); Gül, Ahmet [Department of Chemistry, Technical University of Istanbul, Maslak 34469, Istanbul (Turkey)

2014-03-15

Three chloroindium(III) phthalocyanine derivatives bearing four aromatic (naphthalene or pyrene) or aliphatic (hexylthio) groups were prepared from corresponding phthalonitrile compounds. The indium(III) phthalocyanine derivatives were characterized with elemental analyses, mass, proton nuclear magnetic resonance ({sup 1}H NMR), Fourier transform infrared spectroscopy (FT-IR) and ultraviolet–visible spectroscopy (UV–vis) techniques. Quantum yields and the energy transfer from the substituents to phthalocyanine core were examined. No energy transfer was observed for 5. The energy transfer efficiency from pyrene units to indium phthalocyanine core was calculated as 0.27 for 6. Quantum yields of all samples were very small due to heavy atom effect of indium atom in the core. It was also observed that upon binding of pyrene and naphthalene units to indium phthalocyanine as substituents, the quantum yields of indium phthalocyanine parts of 5 and 6 decreased. -- Highlights: • Three chloroindium(III) phthalocyanines were prepared and characterized. • Aggregation properties of these compounds were investigated. • The energy transfer efficiency was examined. • Quantum yield of these systems were calculated.

Workshop 95. Part III

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

Out of 140 short communications presented in the proceedings, 13 have been inputted into INIS. The topics covered include lifetime control in semiconductor devices by ion irradiation, single crystal scintillation detectors, environmental monitoring, diffusion and sorption of radionuclides in soils, accelerator driven reactors, radioactive waste disposal, digital reactor control systems and research reactors. (Z.S.).

Workshop 95. Part III

International Nuclear Information System (INIS)

1995-01-01

Out of 140 short communications presented in the proceedings, 13 have been inputted into INIS. The topics covered include lifetime control in semiconductor devices by ion irradiation, single crystal scintillation detectors, environmental monitoring, diffusion and sorption of radionuclides in soils, accelerator driven reactors, radioactive waste disposal, digital reactor control systems and research reactors. (Z.S.)

System-oriented inventory models for spare parts

NARCIS (Netherlands)

Basten, R.J.I.; Houtum, van G.J.J.A.N.

2014-01-01

Stocks of spare parts, located at appropriate locations, can prevent long downtimes of technical systems that are used in the primary processes of their users. Since such downtimes are typically very expensive, generally system-oriented service measures are used in spare parts inventory control.

Reactor oscillator - I - III, Part III - Electronic device

International Nuclear Information System (INIS)

Lolic, B.; Jovanovic, S.

1961-12-01

This report describes functioning of the reactor oscillator electronic system. Two methods of oscillator operation were discussed. The first method is so called method of amplitude modulation of the reactor power, and the second newer method is phase method. Both methods are planned for the present reactor oscillator

Characterization and complexation of humic acids. Part 1

International Nuclear Information System (INIS)

Kim, J.L.; Buckau, G.; Klenze, R.; Rhee, D.S.; Wimmer, H.

1991-01-01

This paper summarizes the research contributions to the CEC Mirage II project, particularly the research area on complexation and colloids (COCO). The first part of the paper comprises the characterization of humic and fulvic acids from different origins: a commercial product from the Aldrich Co. used as a reference humic acid and site-specific humic acids from Gorleben (Germany), Boom Clay (Belgium) and Fanay Augeres (France) aquifer systems. The second part includes the complexation of trivalent actinides: Am(III) and Cm(III) with various humic acids. A number of different methods have been applied for the complexation study: spectrophotometry, ultrafiltration, laser-induced photo-acoustic spectroscopy (LPAS) and time-resolved laser fluorescence spectroscopy (TRLFS). The evaluation process of complexation constant is discussed extensively and the well consolidated results are presented, which can be directly used for the geochemical modelling of the radionuclide migration

Explorations of new phases in the Ga(III)/In(III)-Mo(VI)-Se(IV)/Te(IV)-O systems.

Science.gov (United States)

Kong, Fang; Hu, Chun-Li; Hu, Ting; Zhou, Yong; Mao, Jiang-Gao

2009-07-07

Systematic explorations of new phases in the Ga(III)/In(III)-Mo(VI)-Se(IV)/Te(IV)-O systems by hydrothermal syntheses or solid-state reactions at high-temperature led to four new quaternary compounds, namely, Ga(2)MoQ(2)O(10) (Q = Se, Te), In(2)Mo(2)Se(2)O(13)(H(2)O) and In(2)MoTe(2)O(10). Ga(2)MoQ(2)O(10) (Q = Se, Te) are isostructural and their structures feature a 3D network of gallium selenite/tellurite with 12-member ring tunnels along b-axis, the distorted MoO(6) octahedra are attached on the wall of the above tunnels. The structure of In(2)Mo(2)Se(2)O(13)(H(2)O) features a new pillared-layered architecture composed of 2D indium(III) selenite layers that are interconnected by Mo(2)O(10) dimers, forming 8-membered ring tunnels along the b-axis. The structure of In(2)MoTe(2)O(10) features a 2D indium oxide layer formed by corner- and edge-sharing InO(6) and InO(7) polyhedra with MoO(4) tetrahedra and TeO(n) (n = 4, 5) polyhedra hanging on both sides of the layer, there are weak interlayer Te-O bonds of 2.512 A. Results of optical diffuse reflectance spectrum measurements indicate that all four compounds are insulators, which are in agreement with results of band structure calculations based on DFT methods.

The removal of toxic metals from liquid effluents by ion exchange resins. Part IV: Chromium(III)/H+ /Lewatit SP112

International Nuclear Information System (INIS)

Alguacil, F.J.

2017-01-01

This investigation presented results on the removal of chromium(III), from aqueous solution in the 0-5 pH range, using Lewatit SP112 cationic exchange resin. Several aspects affecting the ion exchange process were evaluated, including: the influence of the stirring speed, temperature, pH of the solution, resin dosage and aqueous ionic strength. The selectivity of the system was tested against the presence of other metals in the aqueous solution, whereas the removal of chromium(III) from solutions was compared with results obtained using multiwalled carbon nanotubes as adsorbents. From the batch experimental data, best fit of the results is obtained with the Langmuir model, whereas the ion exchange process is best explained by the pseudo-second order model, moreover, experimental data responded well to the film-diffusion controlled model. Elution of the chromium(III) loaded into the resin is well accomplished by the use of sodium hydroxide solutions. [es

Study of a mixed parallel and serial data transmission in trigger system of Beijing Spectrometer III

International Nuclear Information System (INIS)

Wang Ke; Yin Zejie; Liu Zhen'an; Zhao Dixin; Guo Ya'nan

2005-01-01

Serial optical fiber transmission technology will be used to transfer data from the detector electronics systems to the trigger system in the Beijing Spectrometer III. This technology has the advantages of cutting off the ground loops between the electronics systems and the trigger system, improving the system immunity to electro-magnetic interference and lengthening the transfer distance. Some important aspects of this technology are carefully studied, such as the bit-error-rate, error report, synchronization-back, delay skew of channels and phase stability. Design for single line self-synchronizing back is given, which makes the system more robust. The skew of channels is half a period. So the synchronous parallel data can be gotten if the rising of sample clock is set at the middle of the stable time of all deserialized data. This method can meet the requirement of BES III data transmission. (authors)

The essential function of B. subtilis RNase III is to silence foreign toxin genes.

Directory of Open Access Journals (Sweden)

Sylvain Durand

Full Text Available RNase III-related enzymes play key roles in cleaving double-stranded RNA in many biological systems. Among the best-known are RNase III itself, involved in ribosomal RNA maturation and mRNA turnover in bacteria, and Drosha and Dicer, which play critical roles in the production of micro (mi-RNAs and small interfering (si-RNAs in eukaryotes. Although RNase III has important cellular functions in bacteria, its gene is generally not essential, with the remarkable exception of that of Bacillus subtilis. Here we show that the essential role of RNase III in this organism is to protect it from the expression of toxin genes borne by two prophages, Skin and SPβ, through antisense RNA. Thus, while a growing number of organisms that use RNase III or its homologs as part of a viral defense mechanism, B. subtilis requires RNase III for viral accommodation to the point where the presence of the enzyme is essential for cell survival. We identify txpA and yonT as the two toxin-encoding mRNAs of Skin and SPβ that are sensitive to RNase III. We further explore the mechanism of RNase III-mediated decay of the txpA mRNA when paired to its antisense RNA RatA, both in vivo and in vitro.

Development of a software for the control of the quality management system of the TRIGA-Mark III reactor

International Nuclear Information System (INIS)

Herrera A, E.; Hernandez, L.V.; Hernandez, J.A.

2006-01-01

The quality has not only become one of the essential requirements of the product but rather at the present time it is a strategic factor key of which depends the bigger part of the organizations, not only to maintain their position in the market but also to assure their survival. The good organizations will have processes, procedures and standards to confront these challenges. The big organizations require of the certification of their administration systems, and once the organization has obtained this certification the following step it is to maintain it. The implementation and certification of an administration system requires of an appropriate operative organization that achieves continuous improvements in their operation. This is the case of the TRIGA Mark III reactor, which contains a computer program that upgrades, it controls and it programs activities to develop in the Installation, allowing one operative organization to the whole personnel of the same one. With the purpose of avoiding activities untimely. (Author)

VAK III. Seals and sealing system

International Nuclear Information System (INIS)

d'Agraives, B.C.; Dal Cero, G.; Debeir, R.; Mascetti, E.; Toornvliet, J.; Volcan, A.

1986-01-01

This report presents the VAK III seals and sealing system, which have been used over a period of two years at the Kahl nuclear facility (Federal Republic of Germany), where field tests and feasibility studies were conducted in order to offer a possible solution for the sealing of LWR fuel assemblies. It has been prepared with the aim of an assessment study to be done at the IAEA. It gives all characteristics and technical descriptions for: the sealing principle, the seal construction, the operating tools, the data processing, the drawings, the publications related to that seal. The main points of progress are: the Strong Random Internal Defects (STRID) incorporated in the seals, allowing the obtention of a good signature stability; the Integrity Check on the Seal Status (broken or not) obtained through a decisive mechanical improvement: the Double Breakage Integrity Check (DOBRIC) and with a better ultrasonic evidence of that status; the provision of new function tools, allowing the performance of Identity Measurements in dry conditions (which means also at the manufacturer plant) or in deeper water (wet storage); the study and development of a new JRC VAK 45 Compact Instrument Box, in which all the measuring functions can be grouped and incorporating an autonomous Minicomputer offering to the Inspection the possibility of performing, on the spot, Correlation and Decision processes. The general benefit of such a feasibility study should be to convince the potential users that such a Safeguards Sealing System can be studied for slightly - or largely - different other applications, provided that the Basic and Operating Functions required to the system be clearly defined, possibly after a common agreement would be stated

Irradiated uranium reprocessing, Final report - I-IV, Part III

International Nuclear Information System (INIS)

Gal, I.

1961-12-01

This third part of the final report include the following: Annex 5 - device for opening the cover; Annex 6 - inner part of the device for sampling of the radioactive solution; Annex 7 - outer part of the device for sampling of the radioactive solution; Annex 8 - pneumatic taps [sr

A simple, fast, and accurate thermodynamic-based approach for transfer and prediction of gas chromatography retention times between columns and instruments Part III: Retention time prediction on target column.

Science.gov (United States)

Hou, Siyuan; Stevenson, Keisean A J M; Harynuk, James J

2018-03-27

This is the third part of a three-part series of papers. In Part I, we presented a method for determining the actual effective geometry of a reference column as well as the thermodynamic-based parameters of a set of probe compounds in an in-house mixture. Part II introduced an approach for estimating the actual effective geometry of a target column by collecting retention data of the same mixture of probe compounds on the target column and using their thermodynamic parameters, acquired on the reference column, as a bridge between both systems. Part III, presented here, demonstrates the retention time transfer and prediction from the reference column to the target column using experimental data for a separate mixture of compounds. To predict the retention time of a new compound, we first estimate its thermodynamic-based parameters on the reference column (using geometric parameters determined previously). The compound's retention time on a second column (of previously determined geometry) is then predicted. The models and the associated optimization algorithms were tested using simulated and experimental data. The accuracy of predicted retention times shows that the proposed approach is simple, fast, and accurate for retention time transfer and prediction between gas chromatography columns. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Staphylococcal phosphoenolpyruvate-dependent phosphotransferase system: purification and characterization of the mannitol-specific enzyme III/sup mtl/ of Staphylococcus aureus and Staphylococcus carnosus and homology with the enzyme II/sup mtl/ of Escherichia coli

International Nuclear Information System (INIS)

Reiche, B.; Frank, R.; Deutscher, J.; Meyer, N.; Hengstenberg, W.

1988-01-01

Enzyme III/sup mtl/ is part of the mannitol phosphotransferase system of Staphylococcus aureus and Staphylococcus carnosus and is phosphorylated by phosphoenolpyruvate in a reaction sequence requiring enzyme I (phosphoenolpyruvate-protein phosphotransferase) and the histidine-containing protein HPr. In this paper, the authors report the isolation of III/sup mtl/ from both S. aureus and S. carnosus and the characterization of the active center. After phosphorylation of III/sup mtl/ with [ 32 P]PEP, enzyme I, and HPr, the phosphorylated protein was cleaved with endoproteinase GLu(C). The amino acid sequence of the S. aureus peptide carrying the phosphoryl group was found to be Gln-Val-Val-Ser-Thr-Phe-Met-Gly-Asn-Gly-Leu-Ala-Ile-Pro-His-Gly-Thr-Asp-Asp. The corresponding peptide from S. carnosus shows an equal sequence except that the first residue is Ala instead of Gln. These peptides both contain a single histidyl residue which they assume to carry the phosphoryl group. All proteins of the PTS so far investigated indeed carry the phosphoryl group attached to a histidyl residue. According to sodium dodecyl sulfate gels, the molecular weight of the III/sup mtl/ proteins was found to be 15,000. They have also determined the N-terminal sequence of both proteins. Comparison of the III/sup mtl/ peptide sequences and the C-terminal part of the enzyme II/sup mtl/ of Escherichia coli reveals considerable sequence homology, which supports the suggestion that II/sup mtl/ of E. coli is a fusion protein of a soluble III protein with a membrane-bound enzyme II

Photochemical Degradation of Dimethyl Phthalate by Fe(III)/tartrate/H{sub 2}O{sub 2} System

Energy Technology Data Exchange (ETDEWEB)

Feng, Xianghua; Ding, Shimin; Xie, Faping [Yangtze Normal Univ., Fuling (China)

2012-11-15

Photochemical degradation of dimethyl phthalate (DMP) in Fe(III)/tartrate/H{sub 2}O{sub 2} system was investigated utilizing fluorescent lamps as the primary light source. Effects of initial pH, light source, and initial concentration of each reactant on DMP photodegradation was examined. The results show that the system was able to effectively photodegrade DMP utilizing visible light. Fluorescent lamp, halide lamp, UV lamp and sunlight could all be used as the light sources. The optimal pH ranged among 3.0-4.0 for the system. Increases of the initial concentrations of Fe(III) and H{sub 2}O{sub 2} accelerated the photodegradation of DMP, whereas excessively high initial tartrate concentration resulted in the decrease of photodegradation efficiency and rate of DMP.

Optimization of magnetic field system for glass spherical tokamak GLAST-III

International Nuclear Information System (INIS)

Ahmad, Zahoor; Ahmad, S; Naveed, M A; Deeba, F; Javeed, M Aqib; Batool, S; Hussain, S; Vorobyov, G M

2017-01-01

GLAST-III (Glass Spherical Tokamak) is a spherical tokamak with aspect ratio A = 2. The mapping of its magnetic system is performed to optimize the GLAST-III tokamak for plasma initiation using a Hall probe. Magnetic field from toroidal coils shows 1/ R dependence which is typical with spherical tokamaks. Toroidal field (TF) coils can produce 875 Gauss field, an essential requirement for electron cyclotron resonance assisted discharge. The central solenoid (CS) of GLAST-III is an air core solenoid and requires compensation coils to reduce unnecessary magnetic flux inside the vessel region. The vertical component of magnetic field from the CS in the vacuum vessel region is reduced to 1.15 Gauss kA −1 with the help of a differential loop. The CS of GLAST can produce flux change up to 68 mVs. Theoretical and experimental results are compared for the current waveform of TF coils using a combination of fast and slow capacitor banks. Also the magnetic field produced by poloidal field (PF) coils is compared with theoretically predicted values. It is found that calculated results are in good agreement with experimental measurement. Consequently magnetic field measurements are validated. A tokamak discharge with 2 kA plasma current and pulse length 1 ms is successfully produced using different sets of coils. (paper)

Isothiocyanato complexes of Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl)benzimidazole

Energy Technology Data Exchange (ETDEWEB)

Mishra, A; Singh, V K

1982-01-01

Six-coordinated complexes of the type (Ln(PyBzH)/sub 2/NCS.H/sub 2/O) (NCS)/sub 2/.nH/sub 2/O/mC/sub 2/H/sub 5/OH (Ln = Gd(III), Tb(III), Dy(III) and Ho(III), n=1-2; m=1) have been prepared from Ln(NCS)/sub 6//sup 3 -/. The room temperature magnetic moment values confirm the terpositive state of the lanthanide ions. Infrared spectra suggest the N-coordination of thiocyanate group. Electronic spectral studies of Tb(III), Dy(III) and Ho(III) complexes have been made in terms of LSJ term energies. 13 refs.

Proceedings of the Annual Meeting of the Association for Education in Journalism and Mass Communication (83rd, Phoenix, Arizona, August 9-12, 2000). Miscellaneous, Part III.

Science.gov (United States)

Association for Education in Journalism and Mass Communication.

The Miscellaneous, part III section of the proceedings contains the following 11 papers: "The Relationship between Health and Fitness Magazine Reading and Eating-Disordered Weight-Loss Methods among High School Girls" (Steven R. Thomsen, Michelle M. Weber, and Lora Beth Brown); "A Practical Exercise for Teaching Ethical Decision…

An expert system for spare parts inventory control

International Nuclear Information System (INIS)

Kim, K.Y.; Chen, P.Y.C.; Okrent, D.

1987-01-01

This paper describes an expert system which can handle spare part requirements not only in corrective maintenance (CM) or preventive maintenance (PM), but also when failure rates of components or parts are updated by new data or by predictive maintenance (PDM), and which can also decide optimum stocking level of each spare part. This expert system provides a maintenance (or inventory) manager with an improved basis for decision making in the maintenance related to spare parts. The definitions of PM and PDM from NUREG-1212 (USNRC 1986) are used herein. This expert system used Intellignece/Compiler (Intelligence Ware, 1986) as a language/tool in the IBM-PC

THE NEED TO REFORM THE BANKING SYSTEM – A PREMISE FOR THE IMPLEMENTATION OF THE BASEL III ACCORD

Directory of Open Access Journals (Sweden)

Cosma Daniela

2013-07-01

Many of the changes in the banking system are inspired by the final draft of the G-20 reunion, that of developed countries, in November 2008, a draft considering the economic re-launch and reform. Basel III considers the reform of the banking system by measures whose cover area is much larger and they refer to both the micro-prudential framework and to the macro-prudential one. The application of all the measures established by Basel III Accord is expected to end by 2019, with different effects in the main segments of banking business: retail, corporate and investment banking. The impact of Basel III implementation in the banking system of the USA is almost similar to that of Europe’s, with slight differences regarding the capital and the reduction of mortgage rights, which play a more important role in the USA, the latter having another starting economic point than Europe.

Kinetic stable Cr isotopic fractionation between aqueous Cr(III)-Cl-H2O complexes at 25 °C: Implications for Cr(III) mobility and isotopic variations in modern and ancient natural systems

Science.gov (United States)

Babechuk, Michael G.; Kleinhanns, Ilka C.; Reitter, Elmar; Schoenberg, Ronny

2018-02-01

The stable Cr isotope fractionation preserved in natural substances has been attributed predominantly to Cr(III)-Cr(VI) redox transformations. However, non-redox reaction pathways (e.g., ligand-promoted dissolution, ligand exchange, adsorption of Cr(III)) are liable to contribute to isotopic fractionation in natural systems given that soluble Cr(III)-ligands have been directly documented or modeled in several marine, continental, and hydrothermal environments. This study isolates the stable Cr isotope fractionation accompanying Cl-H2O ligand exchange during the transformation of three aqueous species in the Cr(III)-Cl-H2O system, [CrCl2(H2O)4]+aq (abr. CrCl2+ or S1), [CrCl(H2O)5]2+aq (abr. CrCl2+ or S2), and [Cr(H2O)6]3+aq (abr. Cr3+ or S3), at low pH (≤2). In dilute HCl (0.01 to 1 M), Cr3+ is the kinetically favoured species and transformation of CrCl2+ to CrCl2+ to Cr3+ via 2 steps of dechlorination/hydrolyzation begins immediately upon dissolution of a Cr(III)-Cl solid. Individual species are separated with cation exchange chromatography at different stages of transformation and inter- and intra-species (across an elution peak of one species) isotopic fractionation of up to 1 and 2‰ (δ53/52Cr), respectively, is documented. Comparison of peak elution characteristics with Cr-Cl-H-O isotopologue mass abundances suggests mass-dependent sorting of isotopologues alone cannot explain intra-species fractionation, supporting a previously published proposal that preferential adsorption of light Cr isotopes on the resin is driven by vibrational energy effects. The transformation of CrCl2+ to CrCl2+ is faster than CrCl2+ to Cr3+ and the rates of both transformations increase with solution pH. Preferential reaction of light Cr(III) isotopes into product species occurs during each transformation, consistent with closed-system, kinetic fractionation during Cl-H2O ligand exchange. Inter-species fractionation is assessed using time-series experiments beginning from the

Spectrophotometric determination of uranium and thorium with arsenazo III in the flow injection system

International Nuclear Information System (INIS)

Andrade, M. das G.M. de.

1986-12-01

A simple system for flow injection analysis (FIA) with double confluence was built using a filter photocolorimeter, an analogic potentiometer, 'plexiglass' flow cuvettes, polyethylene colls and tubes, 'plexiglass' commuter and peristaltic pump to introduce solutions and gravity as flow source. The system was dimensioned and studied using only Arsenazo III solutions. Spectrophotometric methods for uranium and thorium using Arsenazo III were studied using a scanning spectrophotometer and after chosing adequate red filter, adapted to photocolorimetry using flow cuvettes and FIA. Synthetic samples, phosphate rock, and process samples from uranium recovery of dolomites were analysed. Rocks of Morro do Ferro (MG, Brazil), Caldasite (Baddeleyte + Zirconite), Zirconite, Monazite from a program for certification and certified rocks (Dunite DC-1, CANMET) were analysed without chemical separation of Th (IV) and with ion exchange separation in semi-micro columns of cation exchange resin (Dowex 50). (Author) [pt

Gen-III/III+ reactors. Solving the future energy supply shortfall. The SWR-1000 option

International Nuclear Information System (INIS)

Stosic, Z.V.

2006-01-01

Deficiency of non-renewable energy sources, growing demand for electricity and primary energy, increase in population, raised concentration of greenhouse gases in the atmosphere and global warming are the facts which make nuclear energy currently the most realistic option to replace fossil fuels and satisfy global demand. The nuclear power industry has been developing and improving reactor technology for almost five decades and is now ready for the next generation of reactors which should solve the future energy supply shortfall. The advanced Gen-III/III+ (Generation III and/or III+) reactor designs incorporate passive or inherent safety features which require no active controls or operational intervention to manage accidents in the event of system malfunction. The passive safety equipment functions according to basic laws of physics such as gravity and natural convection and is automatically initiated. By combining these passive systems with proven active safety systems, the advanced reactors can be considered to be amongst the safest equipment ever made. Since the beginning of the 90's AREVA NP has been intensively engaged in the design of two advanced Gen-III+ reactors: (i) PWR (Pressurized Water Reactor) EPR (Evolutionary Power Reactor) and (ii) BWR (Boiling Water Reactor) SWR-1000. The SWR-1000 reactor design marks a new era in the successful tradition of BWR technology. It meets the highest safety standards, including control of a core melt accident. This is achieved by supplementing active safety systems with passive safety equipment of diverse design for accident detection and control and by simplifying systems needed for normal plant operation. A short construction period, flexible fuel cycle lengths and a high fuel discharge burn-up contribute towards meeting economic goals. The SWR-1000 completely fulfils international nuclear regulatory requirements. (author)

The vacuum interlock system for the PETRA III beamlines

Energy Technology Data Exchange (ETDEWEB)

Degenhardt, Markus; Hahn, Ulrich; Hesse, Mathias; Schulte-Schrepping, Horst [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2008-07-01

The storage ring PETRA at DESY in Hamburg is being reconstructed into the third generation source for synchrotron radiation, PETRA III. The up to 100 m long beamlines are large UHV-systems that guide the synchrotron radiation from the storage ring to the experiments. Each beamline will be equipped with a vacuum interlock system to ensure the safe operation of the vacuum components. In particular the task of the vacuum interlock is to prevent faulty operations that can cause a ventilation of the vacuum system or a damage of vacuum components by the high power synchrotron radiation beam. The interlock system will be implemented as a PLC that is connected to a distributed input/output layer via a field bus system. As a specialty, the PLC will be realised as a soft-PLC running on a PC with a real time windows operating system. Another specialty is the visualisation and remote control of the vacuum interlock system by means of a website. At the beamline the interlock will be operated via a touch panel that displays the visualisation website. Additionally, the interlock can be remotely operated from any location by opening the visualisation website with a browser. The interlock is protected against unauthorised operation by a login page. All relevant interlock data will be fed into the existing network-based archive system.

Electre III method in assessment of variants of integrated urban public transport system in Cracow

Directory of Open Access Journals (Sweden)

Katarzyna SOLECKA

2014-12-01

Full Text Available There is a lot of methods which are currently used for assessment of urban public transport system development and operation e.g. economic analysis, mostly Cost-Benefit Analysis – CBA, Cost-Effectiveness Analysis - CEA, hybrid methods, measurement methods (survey e.g. among passengers and measurement of traffic volume, vehicles capacity etc., and multicriteria decision aiding methods (multicriteria analysis. The main aim of multicriteria analysis is the choice of the most desirable solution from among alternative variants according to different criteria which are difficult to compare against one another. There are several multicriteria methods for assessment of urban public transport system development and operation, e.g. AHP, ANP, Electre, Promethee, Oreste. The paper presents an application of one of the most popular variant ranking methods – Electre III method. The algorithm of Electre III method usage is presented in detail and then its application for assessment of variants of urban public transport system integration in Cracow is shown. The final ranking of eight variants of integration of urban public transport system in Cracow (from the best to the worst variant was drawn up with the application of the Electre III method. For assessment purposes 10 criteria were adopted: economical, technical, environmental, and social; they form a consistent criteria family. The problem was analyzed with taking into account different points of view: city authorities, public transport operators, city units responsible for transport management, passengers and others users. Separate models of preferences for all stakeholders were created.

Instrumentation and control of the Doublet III Neutral Beam Injector System

Energy Technology Data Exchange (ETDEWEB)

Kohli, J.C.; Moore, C.D.; Drobnis, D.D.; Elischer, V.P.; Kilgore, R.; Uber, D.

1980-03-01

The hardware and software required for the operation of the Doublet III Neutral Beam Injector System (NBIS) are described. Development and implementation of this Instrumentation and Control System was divided between the major participants - General Atomic Company and Lawrence Berkeley Laboratory. The subdivision of responsibilities and the coordination of the participants' activities are described with reference to hardware and software requirements in support of the entire system. Included are a description of the operators' consoles, the interlock system and the CAMAC system. One feature of the control software is source modeling. This feature includes feedback on a shot to shot basis and adaptive control. Adaptive control permits the computer system to automatically adjust parameters after a shot, and to control the system to automatically compensate for time varying NBIS components. The Neutral Beam Power Supply features power supply modeling, fiber optic transmission of analog signals and digital control of power supply power-up/interlocks.

Instrumentation and control of the Doublet III Neutral Beam Injector System

International Nuclear Information System (INIS)

Kohli, J.C.; Moore, C.D.; Drobnis, D.D.; Elischer, V.P.; Kilgore, R.; Uber, D.

1980-03-01

The hardware and software required for the operation of the Doublet III Neutral Beam Injector System (NBIS) are described. Development and implementation of this Instrumentation and Control System was divided between the major participants - General Atomic Company and Lawrence Berkeley Laboratory. The subdivision of responsibilities and the coordination of the participants' activities are described with reference to hardware and software requirements in support of the entire system. Included are a description of the operators' consoles, the interlock system and the CAMAC system. One feature of the control software is source modeling. This feature includes feedback on a shot to shot basis and adaptive control. Adaptive control permits the computer system to automatically adjust parameters after a shot, and to control the system to automatically compensate for time varying NBIS components. The Neutral Beam Power Supply features power supply modeling, fiber optic transmission of analog signals and digital control of power supply power-up/interlocks

Basel III Forthcoming - How Swedish banks perceive the impact of the Basel III Accord and its effect on systemic risk

OpenAIRE

Jordbru, Marlene; Sjöqvist, Lina

2012-01-01

The banking sector plays an important part of the modern society and a collapse of the financial system would have severe consequences for the society. In order to protect the system from a systemic collapse, regulations have been put in place to ensure a more stable financial system. Because of the financial instabilities experienced in recent years, the Basel Committee has released an improved framework in order to deal with the systemic risk which contributed to the crisis. Parts of the ne...

Structural Characterization of Am(III)- and Pu(III)-DOTA Complexes.

Science.gov (United States)

Audras, Matthieu; Berthon, Laurence; Berthon, Claude; Guillaumont, Dominique; Dumas, Thomas; Illy, Marie-Claire; Martin, Nicolas; Zilbermann, Israel; Moiseev, Yulia; Ben-Eliyahu, Yeshayahu; Bettelheim, Armand; Cammelli, Sebastiano; Hennig, Christoph; Moisy, Philippe

2017-10-16

The complexation of 1,4,7,10-tetrazacyclodecane-1,4,7,10-tetraacetic acid (DOTA) ligand with two trivalent actinides (Am 3+ and Pu 3+ ) was investigated by UV-visible spectrophotometry, NMR spectroscopy, and extended X-ray absorption fine structure in conjunction with computational methods. The complexation process of these two cations is similar to what has been previously observed with lanthanides(III) of similar ionic radius. The complexation takes place in different steps and ends with the formation of a (1:1) complex [(An(III)DOTA)(H 2 O)] - , where the cation is bonded to the nitrogen atoms of the ring, the four carboxylate arms, and a water molecule to complete the coordination sphere. The formation of An(III)-DOTA complexes is faster than the Ln(III)-DOTA systems of equivalent ionic radius. Furthermore, it is found that An-N distances are slightly shorter than Ln-N distances. Theoretical calculations showed that the slightly higher affinity of DOTA toward Am over Nd is correlated with slightly enhanced ligand-to-metal charge donation arising from oxygen and nitrogen atoms.

Meeting the challenge of managed care - Part III: Information systems for radiation oncology practice

International Nuclear Information System (INIS)

Kijewski, Peter

1997-01-01

Purpose: This course will review topics to be considered when defining an information systems plan for a department of radiation oncology. A survey of available systems will be presented. Computer information systems can play an important role in the effective administration and operation of a department of radiation oncology. Tasks such as 1) scheduling for physicians, patients, and rooms, 2) charge collection and billing, 3) administrative reporting, and 4) treatment verification can be carried out efficiently with the assistance of computer systems. Operating a department without a state of art computer system will become increasingly difficult as hospitals and healthcare buyers increasingly rely on computer information technology. Communication of the radiation oncology system with outside systems will thus further enhance the utility of the computer system. The steps for the selection and installation of an information system will be discussed: 1) defining the objectives, 2) selecting a suitable system, 3) determining costs, 4) setting up maintenance contracts, and 5) planning for future upgrades

Rethinking ASME III seismic analysis for piping operability evaluations

International Nuclear Information System (INIS)

Adams, T.M.; Stevenson, J.D.

1994-01-01

It has been recognized since the mid 1980's that there are very large seismic margins to failure for nuclear piping systems when designed using current industry practice, design criteria, and methods. As a result of this realization there are or have been approximately eighteen initiatives within the ASME , Boiler and Pressure Vessel Code Section III, Division 1, in the form of proposed code cases and proposed code text changes designed to reduce these failure margins to more realistic values. For the most part these initiatives have concentrated on reclassifying seismic inertia stresses in the piping as secondary and increasing the allowable stress limits permitted by Section III of the ASME, Boiler Code. This paper focuses on the application of non-linear spectral analysis methods as a method to reduce the input seismic demand determination and thereby reduce the seismic failure margins. The approach is evaluated using the ASME Boiler Pressure Vessel Code Section III Subgroup on Design benchmark procedure as proposed by the Subgroup's Special Task Group on Integrated Piping Criteria. Using this procedure, criteria are compared to current code criterion and analysis methods, and several other of the currently proposed Boiler and Pressure Vessel, Section III, changes. Finally, the applicability of the non-linear spectral analysis to continued Safe Operation Evaluations is reviewed and discussed

Complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III)

International Nuclear Information System (INIS)

Ferenc, W.; Bernat, M; Gluchowska, H.W.; Sarzynski, J.

2010-01-01

The complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) have been synthesized as polycrystalline hydrated solids, and characterized by elemental analysis, spectroscopy, magnetic studies and also by X-ray diffraction and thermogravimetric measurements. The analysed complexes have the following colours: violet for Nd(III), white for Gd(III) and cream for Ho(III) compounds. The carboxylate groups bind as bidentate chelating (Ho) or bridging ligands (Nd, Gd). On heating to 1173K in air the complexes decompose in several steps. At first, they dehydrate in one step to form anhydrous salts, that next decompose to the oxides of respective metals. The gaseous products of their thermal decomposition in nitrogen were also determined and the magnetic susceptibilities were measured over the temperature range of 76-303K and the magnetic moments were calculated. The results show that 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) are high-spin complexes with weak ligand fields. The solubility value in water at 293K for analysed 4-chlorophenoxyacetates is in the order of 10 -4 mol/dm 3 . (author)

Dental compensation for skeletal Class III malocclusion by isolated extraction of mandibular teeth. Part 1: Occlusal situation 12 years after completion of active treatment.

Science.gov (United States)

Zimmer, Bernd; Schenk-Kazan, Sarah

2015-05-01

The purpose of this work was to statistically evaluate the outcomes achieved by isolated extraction of mandibular teeth (second premolars or first molars) for Class III compensation. Part A of the study dealt with the quality of outcomes at the end of active treatment, using weighted Peer Assessment Rating (PAR) scores determined on the basis of casts for 25 (14 female and 11 male) consecutive patients aged 16 ± 1.7 years at the time of debonding. These results were compared to the scores in a randomly selected control group of 25 (14 female and 11 male) patients who were 14.7 ± 1.9 years old at debonding. Part B evaluated the long-term stability of the outcomes based on 12 (all of them female) patients available for examination after a mean of 11.8 years. The mean weighted PAR scores obtained in both study parts were analyzed for statistical differences using a two-tailed paired Student's t-test at a significance level of p ≤ 0.05. Mean weighted PAR scores of 4.76 ± 3.94 and 3.92 ± 3.44 were obtained in the Class III extraction group and the control group, respectively, at the end of active treatment. This difference was not significant (p = 0.49). Among the 12 longitudinal patients, the mean score increased from 4 ± 3.46 at debonding to 6.25 ± 3.67 by the end of the 11.8-year follow-up period. This difference was significant (p = 0.0008). Treatment of Class III anomalies by isolated extraction of lower premolars or molars can yield PAR scores similar to those achieved by standard therapies. These scores, while increasing significantly, remained at a clinically acceptable level over 11.8 years. Hence this treatment modality--intended for cases that border on requiring orthognathic surgery--may also be recommended from a long-term point of view.

A Statewide Collaboration: Ohio Level III Trauma Centers' Approach to the Development of a Benchmarking System.

Science.gov (United States)

Lang, Carrie L; Simon, Diane; Kilgore, Jane

The American College of Surgeons Committee on Trauma revised the Resources for Optimal Care of the Injured Patient to include the criteria for trauma centers to participate in a risk-adjusted benchmarking system. Trauma Quality Improvement Program is currently the risk-adjusted benchmarking program sponsored by the American College of Surgeons, which will be required of all trauma centers to participate in early 2017. Prior to this, there were no risk-adjusted programs for Level III verified trauma centers. The Ohio Society of Trauma Nurse Leaders is a collaborative group made up of trauma program managers, coordinators, and other trauma leaders who meet 6 times a year. Within this group, a Level III Subcommittee was formed initially to provide a place for the Level III centers to discuss issues specific to the Level III centers. When the new requirement regarding risk-adjustment became official, the subcommittee agreed to begin reporting simple data points with the idea to risk adjust in the future.

Theoretical analysis of nuclear reactors (Phase II), I-V, Part III, Reactor poisoning; Razrada metoda teorijske analize nuklearnih reaktora (II faza) I-V, III Deo, Zatrovanje reaktora, II faza

Energy Technology Data Exchange (ETDEWEB)

Pop-Jordanov, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1962-10-15

This phase is dealing with influence of all the fission products except Xe{sup 135} on the reactivity of a reactor, usually named as reactor poisoning. The first part of the report is a review of methods for calculation of reactor poisoning. The second part shows the most frequently used method for calculation of cross sections and yields of pseudo products (for thermal neutrons). The system of equations was adopted dependent on the conditions of the available computer system. It is described in part three. Detailed method for their application is described in part four and results obtained are presented in part five.

Recent operational history of the new Sandia Pulsed Reactor III (SPR III)

International Nuclear Information System (INIS)

Schmidt, T.R.; Estes, B.F.; Reuscher, J.A.

1977-01-01

The Sandia Pulsed Reactor III (SPR III) is a fast-pulse research reactor which was designed and built at Sandia Laboratories and achieved criticality in August 1975. The reactor is now characterized and is in an operational configuration. The core consists of 18 fuel plates (258 kg fuel mass) of fully enriched uranium alloyed with 10 wt.% molybdenum. It is arranged in an annular configuration with an inside diameter of 17.78 cm, an outside diameter of 29.72 cm, and a height of 35.9 cm. The reactor core uses reflectors of copper and aluminum for control and an external bolting arrangement to secure the fuel plates. SPR III and SPR II are operated on an interchangeable basis using the same facility and control system. As of June 1977, SPR III has had over 240 operations with core temperatures up to 541 0 C

Reconstitution of the yeast RNA polymerase III transcription system with all recombinant factors.

Science.gov (United States)

Ducrot, Cécile; Lefebvre, Olivier; Landrieux, Emilie; Guirouilh-Barbat, Josée; Sentenac, André; Acker, Joel

2006-04-28

Transcription factor TFIIIC is a multisubunit complex required for promoter recognition and transcriptional activation of class III genes. We describe here the reconstitution of complete recombinant yeast TFIIIC and the molecular characterization of its two DNA-binding domains, tauA and tauB, using the baculovirus expression system. The B block-binding module, rtauB, was reconstituted with rtau138, rtau91, and rtau60 subunits. rtau131, rtau95, and rtau55 formed also a stable complex, rtauA, that displayed nonspecific DNA binding activity. Recombinant rTFIIIC was functionally equivalent to purified yeast TFIIIC, suggesting that the six recombinant subunits are necessary and sufficient to reconstitute a transcriptionally active TFIIIC complex. The formation and the properties of rTFIIIC-DNA complexes were affected by dephosphorylation treatments. The combination of complete recombinant rTFIIIC and rTFIIIB directed a low level of basal transcription, much weaker than with the crude B'' fraction, suggesting the existence of auxiliary factors that could modulate the yeast RNA polymerase III transcription system.

The Feasibility of Administering a Practical Clinical Examination in Podiatry at a College of Podiatric Medicine: Results of a Field Trial Under Simulated Part III Test Conditions.

Science.gov (United States)

And Others; Valletta, Michael

1978-01-01

The results of a practical clinical examination in podiatric medicine administered to fourth-year students are presented. The examination could become the prototype of a Part III practical clinical examination under the auspices of the National Board of Podiatry Examiners. Its feasibility is established and problems and issues are discussed.…

Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-[(1H-benzimidazol-2-yl-methylene) amino] phenol

International Nuclear Information System (INIS)

Omprakash, K.L.; Chandra Pal, A.V.; Reddy, M.L.N.

1982-01-01

A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO 4 ) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (logβ 2 ) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III). (author)

Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-((1H-benzimidazol-2-yl-methylene) amino) phenol

Energy Technology Data Exchange (ETDEWEB)

Omprakash, K L; Chandra Pal, A V; Reddy, M L.N. [Osmania Univ., Hyderabad (India). Dept. of Chemistry

1982-03-01

A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO/sub 4/) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (log..beta../sub 2/) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III).

Drilling miniature holes, Part III

Energy Technology Data Exchange (ETDEWEB)

Gillespie, L.K.

1978-07-01

Miniature components for precision electromechanical mechanisms such as switches, timers, and actuators typically require a number of small holes. Because of the precision required, the workpiece materials, and the geometry of the parts, most of these holes must be produced by conventional drilling techniques. The use of such techniques is tedious and often requires considerable trial and error to prevent drill breakage, minimize hole mislocation and variations in hole diameter. This study of eight commercial drill designs revealed that printed circuit board drills produced better locational and size repeatability than did other drills when centerdrilling was not used. Boring holes 1 mm in dia, or less, as a general rule did not improve hole location in brass or stainless steel. Hole locations of patterns of 0.66-mm holes can be maintained within 25.4-..mu..m diametral positional tolerance if setup misalignments can be eliminated. Size tolerances of +- 3.8 ..mu..m can be maintained under some conditions when drilling flat plates. While these levels of precision are possible with existing off-the-shelf drills, they may not be practical in many cases.

Molecular model of a type III secretion system needle: Implications for host-cell sensing.

Science.gov (United States)

Deane, Janet E; Roversi, Pietro; Cordes, Frank S; Johnson, Steven; Kenjale, Roma; Daniell, Sarah; Booy, Frank; Picking, William D; Picking, Wendy L; Blocker, Ariel J; Lea, Susan M

2006-08-15

Type III secretion systems are essential virulence determinants for many Gram-negative bacterial pathogens. The type III secretion system consists of cytoplasmic, transmembrane, and extracellular domains. The extracellular domain is a hollow needle protruding above the bacterial surface and is held within a basal body that traverses both bacterial membranes. Effector proteins are translocated, via this external needle, directly into host cells, where they subvert normal cell functions to aid infection. Physical contact with host cells initiates secretion and leads to formation of a pore, thought to be contiguous with the needle channel, in the host-cell membrane. Here, we report the crystal structure of the Shigella flexneri needle subunit MxiH and a complete model for the needle assembly built into our three-dimensional EM reconstruction. The model, combined with mutagenesis data, reveals that signaling of host-cell contact is relayed through the needle via intersubunit contacts and suggests a mode of binding for a tip complex.

SPSP Phase III Recruiting, Selecting, and Developing Secure Power Systems Professionals. Individual and Team Performance Guidelines

Energy Technology Data Exchange (ETDEWEB)

O' Neil, Lori Ross [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Conway, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tobey, D. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Greitzer, Frank L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dalton, Angela C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pusey, Portia K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-03-01

The Secure Power Systems Professional Phase III final report was released last year which an appendix of Individual and Team Performance Guidelines. This new report is that appendix broken out as a standalone document to assist utilities in recruiting and developing Secure Power Systems Professionals at their site.

Spectrophotometric and pH-Metric Studies of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III Metal Complexes with Rifampicin

Directory of Open Access Journals (Sweden)

A. N. Sonar

2011-01-01

Full Text Available The metal-ligand and proton-ligand stability constant of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III metals with substituted heterocyclic drug (Rifampicin were determined at various ionic strength by pH metric titration. NaClO4 was used to maintain ionic strength of solution. The results obtained were extrapolated to the zero ionic strength using an equation with one individual parameter. The thermodynamic stability constant of the complexes were also calculated. The formation of complexes has been studied by Job’s method. The results obtained were of stability constants by pH metric method is confirmed by Job’s method.

Electrochemical reduction of Eu (III) in propionic media

International Nuclear Information System (INIS)

Brotto, M.E.; Rabockai, T.

1988-01-01

Some chronopotentiometric studies of Eu (III) electro-reducion in propionic media that suggests the presence of two parallel rections: Eu (III) → Eu (II) and Eu (III) → Eu (II) → Y are presented. Some experimental data, such Eu (III) reducion, electrolysis of solutions and ionic power of the system are discussed. (M.J.C.) [pt

Complexes of lanthanum(III), cerium(III), samarium(III) and dysprosium(III) with substituted piperidines

Energy Technology Data Exchange (ETDEWEB)

Manhas, B S; Trikha, A K; Singh, H; Chander, M

1983-11-01

Complexes of the general formulae M/sub 2/Cl/sub 6/(L)/sub 3/.C/sub 2/H/sub 5/OH and M/sub 2/(NO/sub 3/)/sub 6/(L)/sub 2/.CH/sub 3/OH have been synthesised by the reactions of chlorides and nitrates of La(III), Ce(III), Sm(III) and Dy(III) with 2-methylpiperidine, 3-methylpiperidine and 4-methylpiperidine. These complexes have been characterised on the basis of their elemental analysis, and IR and electronic reflectance spectra. IR spectral data indicate the presence of coordinated ethanol and methanol molecules and bidentate nitrate groups. Coordination numbers of the metal ions vary from 5 to 8. 19 refs.

Development of an enhanced loose parts monitoring system (LPMS)

International Nuclear Information System (INIS)

Choi, Y. C.; Park, J. H.; Yoon, D. B.; Choi, K. S.; Sohn, C. H.

2006-01-01

LPMS (loose parts monitoring system) is one of the most important structural integrity monitoring systems. It is operated for a early detection of the impacts by loosened or detached metallic, objects on the primary pressure boundary in a nuclear power plant. The impacted parts might cause flow blockage in the fuel channel, prevent the control rod from moving properly, damage the pump impeller, and give rise to cracks on the steam generator tube sheet, etc. In Korea, The LPMS is currently operating in all of the nuclear power plants as a subsystem in the NIMS (NSSS Integrity Monitoring System), However the performances are being deteriorated in both the hardware and software since it was designed in 1980's. In particular the system is not capable of promptly responding to the continuously triggered impacts in a short period failing to monitor the real loose parts. Also the diagnostic tools to estimate the location and the mass or energy of the impact source have not been reflected. Therefore, a new loose parts monitoring system has been developed to improve the capabilities of the current one and ultimately to replace it. An enhanced Loose Parts Monitoring System(LPMS) has been developed by KAERI(Korea Atomic Energy Research Inst.), not only to improve the performance of an on-line signal processing for a monitoring system but also to enhance the evaluation technique of the true impact signals by loose parts. This new system has taken into account the state-of-the-art technology to cover the problems with the conventional system. (authors)

The nuclear reactor systems

International Nuclear Information System (INIS)

Bacher, P.

2008-01-01

This paper describes the various nuclear reactor systems, starting with the Generation II, then the present development of the Generation III and the stakes and challenges of the future Generation IV. Some have found appropriate to oppose reactor systems or generations one to another, especially by minimizing the enhancements of generation III compared to generation II or by expecting the earth from generation IV (meaning that generation III is already obsolete). In the first part of the document (chapter 2), some keys are given to the reader to develop its proper opinion. Chapter 3 describes more precisely the various reactor systems and generations. Chapter 4 discusses the large industrial manoeuvres around the generation III, and the last chapter gives some economical references, taking into account, for the various means of power generation, the impediments linked to climate protection

A-Part Gel, an adhesion prophylaxis for abdominal surgery: a randomized controlled phase I-II safety study [NCT00646412].

Science.gov (United States)

Lang, Reinhold; Baumann, Petra; Schmoor, Claudia; Odermatt, Erich K; Wente, Moritz N; Jauch, Karl-Walter

2015-01-01

Intra-abdominal surgical intervention can cause the development of intra-peritoneal adhesions. To reduce this problem, different agents have been tested to minimize abdominal adhesions; however, the optimal adhesion prophylaxis has not been found so far. Therefore, the A-Part(®) Gel was developed as a barrier to diminish postsurgical adhesions; the aim of this randomized controlled study was a first evaluation of its safety and efficacy. In this prospective, controlled, randomized, patient-blinded, monocenter phase I-II study, 62 patients received either the hydrogel A-Part-Gel(®) as an anti-adhesive barrier or were untreated after primary elective median laparotomy. Primary endpoint was the occurrence of peritonitis and/or wound healing impairment 28 ± 10 days postoperatively. As secondary endpoints anastomotic leakage until 28 days after surgery, adverse events and adhesions were assessed until 3 months postoperatively. A lower rate of wound healing impairment and/or peritonitis was observed in the A-Part Gel(®) group compared to the control group: (6.5 vs. 13.8 %). The difference between the two groups was -7.3%, 90 % confidence interval [-20.1, 5.4 %]. Both treatment groups showed similar frequency of anastomotic leakage but incidence of adverse events and serious adverse events were slightly lower in the A-Part Gel(®) group compared to the control. Adhesion rates were comparable in both groups. A-Part Gel(®) is safe as an adhesion prophylaxis after abdominal wall surgery but no reduction of postoperative peritoneal adhesion could be found in comparison to the control group. This may at least in part be due to the small sample size as well as to the incomplete coverage of the incision due to the used application. NCT00646412.

Yersinia Type III Secretion System Master Regulator LcrF

Science.gov (United States)

Schwiesow, Leah; Lam, Hanh

2015-01-01

Many Gram-negative pathogens express a type III secretion (T3SS) system to enable growth and survival within a host. The three human-pathogenic Yersinia species, Y. pestis, Y. pseudotuberculosis, and Y. enterocolitica, encode the Ysc T3SS, whose expression is controlled by an AraC-like master regulator called LcrF. In this review, we discuss LcrF structure and function as well as the environmental cues and pathways known to regulate LcrF expression. Similarities and differences in binding motifs and modes of action between LcrF and the Pseudomonas aeruginosa homolog ExsA are summarized. In addition, we present a new bioinformatics analysis that identifies putative LcrF binding sites within Yersinia target gene promoters. PMID:26644429

Harnessing type I and type III CRISPR-Cas systems for genome editing

DEFF Research Database (Denmark)

Li, Yingjun; Pan, Saifu; Zhang, Yan

2016-01-01

CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR-associated) systems are widespread in archaea and bacteria, and research on their molecular mechanisms has led to the development of genome-editing techniques based on a few Type II systems. However, there has not been any...... report on harnessing a Type I or Type III system for genome editing. Here, a method was developed to repurpose both CRISPR-Cas systems for genetic manipulation in Sulfolobus islandicus, a thermophilic archaeon. A novel type of genome-editing plasmid (pGE) was constructed, carrying an artificial mini-CRISPR...... and selectively retained as transformants. Using this strategy, different types of mutation were generated, including deletion, insertion and point mutations. We envision this method is readily applicable to different bacteria and archaea that carry an active CRISPR-Cas system of DNA interference provided...

Inner-sphere and outer-sphere complexes of yttrium(III), lanthanum (III), neodymium(III), terbium(III) and thulium(III) with halide ions in N,N-dimethylformamide

International Nuclear Information System (INIS)

Takahashi, Ryouta; Ishiguro, Shin-ichi

1991-01-01

The formation of chloro, bromo and iodo complexes of yttrium(III), and bromo and iodo complexes of lanthanum(III), neodymium(III), terbium(III) and thulium(III) has been studied by precise titration calorimetry in N,N-dimethylformamide (DMF) at 25 o C. The formation of [YCl] 2+ , [YCl 2 ] + , [YCl 3 ] and [YCl 4 ] - , and [MBr] 2+ and [MBr 2 ] + (M = Y, La, Nd, Tb, Tm) was revealed, and their formation constants, enthalpies and entropies were determined. It is found that the formation enthalpies change in the sequence ΔH o (Cl) > ΔH o (l), which is unusual for hard metal (III) ions. This implies that, unlike the chloride ion, the bromide ion forms outer-sphere complexes with the lanthanide(III) and yttrium(III) ions in DMF. Evidence for either an inner- or outer-sphere complex was obtained from 89 Y NMR spectra for Y(ClO 4 ) 3 , YCl 3 and YBr 3 DMF solutions at room temperature. (author)

Extractive separation of Al(III) and Ni(II) by Di-2-Ethylhexyl phosphoric acid-kerosene system from aqueous fluoride medium

International Nuclear Information System (INIS)

Islam, M.F.; Begum, D.A.; Rahman, M.; Rahman, M.S.

2009-01-01

In the study of the extractive separation of Al(III) and Ni(II) by di-2-ethylhexyl phosphoric acid D2EHPA-kerosene from aqueous fluoride medium, about 94% Al(III) and 2% Ni(II) were extracted with 0.3 M D2EHPA (pH 2.1 and temperature 30+-1 degree C). Extraction of Ni(II) decreased with increasing extractant concentration. D2EHPA-kerosene-fluoride system showed better extraction of Al(III) with higher extractant concentration and aqueous pH and vice versa for the extraction of Ni(II). The maximum separation factor (beta 1380) was obtained for Al(III) at 20 degree C and decreased to (beta 732) at 60 degree C. The separation of Al(III) from Ni(II) was favoured at normal temperature. Extraction followed the order Al(III), Ni(II). About 99% stripping of Al(III) was attained from the loaded 0.20 M D2EHPA. Much faster extraction of Al(III) compared to Ni(II) and preferential loading were shown by D2EHPA-kerosene in the presence of fluoride ion in the aqueous phase. Separation of Al(III) was the most outstanding from Ni-Al-F-complex solution. (author)

Workshop 97. Part III. Proceedings

International Nuclear Information System (INIS)

1996-12-01

This volume of the Proceedings covers the following branches of science and technology: power systems and electrical engineering, electronics and measuring and communication engineering, optics, quantum electronics and photonics, microelectronics, and biomedical engineering. Out of the contributions, 2 have been input to INIS. (P.A.)

Phosphorescent systems based on iridium(III) complexes

NARCIS (Netherlands)

Ulbricht, C.

2009-01-01

Phosphorescent iridium(III)-based complexes are experiencing a growing interest in a number of research fields. Aside from lighting and display technologies (i.e. OLEDs and LECs), they find use in various applications such as biolabeling, sensors, solar cells and water splitting. In particular, the

Opportunistic replacement of fusion power system parts

International Nuclear Information System (INIS)

Day, J.A.; George, L.L.

1981-01-01

This paper describes a maintenance problem in a fusion power plant. The problem is to specify which life limited parts should be replaced when there is an opportunity. The objective is to minimize the cost rate of replacement parts and of maintenance actions while satisfying a power plant availability constraint. The maintenance policy is to look ahead and replace all parts that will reach their life limits within a time called a screen. Longer screens yield greater system availabilities because more parts are replaced prior to their life limits

Burnable poison calculations for Mk.III gas-cooled reactor systems

Energy Technology Data Exchange (ETDEWEB)

Gubbins, M E

1971-02-15

A method of calculating the reactivity and burn-up hisotry of a Mk.III GCR system containing burnable poisons has been described. The method allows for poison-fuel interaction. Using the method it has been shown that burn-up of the poison under a constant incident flux can give errors of the order of 1-2 niles. A calculation using the method described will take about 50% longer than a straightforward fuel burn-up calculation in the same number of groups. The multi-cell approach has a potential for handling greater geometrical complexity. It is intended to compare the method against experiment as soon as suitable experimental results become available.

Loose parts monitoring system

International Nuclear Information System (INIS)

Wakasa, Kohji; Nishida, Eiichi; Ishii, Kazuo; Yamanaka, Hiroto.

1987-01-01

In the loose parts monitoring system (LPMS), installed for integrity monitoring of the nuclear power plants; when there occur foreign metallic objects in the reactor primary system, including a steam generator and the piping, the sounds caused by them moving with the cooling water and thereby getting in contact with various structures are detected. Its purpose is, therefore, to detect any abnormality in the reactor plant system through such abnormal sounds due to loose or fallen supports etc., and so provide this information to the reactor operators. In principle, accelerometers are distributed in such as reactor vessel, steam generator, coolant pumps, etc., so that various sounds are collected and converted into electrical signals, followed by analysis of the data. Described are the LPMS configuration/functions, the course taken in LPMS development, future problems, etc. (Mori, K.)

Serious systemic infection caused by non-encapsulated Haemophilus influenzae biotype III in an adult

DEFF Research Database (Denmark)

Lester, Anne; Pedersen, P B

1991-01-01

Haemophilus influenzae is the aetiological agent in less than 1% of septic arthritis cases in adults and most often serotype b is involved. We report here a case of severe systemic infection due to non-encapsulated H. influenzae biotype III in a 40-year-old man, previously healthy although alcohol...... abuser. Cholangitis and acute alcoholic hepatitis were diagnosed simultaneously. The organism was grown from blood and from synovial fluid of the left knee, but several other joints were also affected. The close relationship between H. influenzae biotype III and H. aegyptius is mentioned in view...... of recent reports of fatal childhood illness caused by a special clone of H. aegyptius and the importance of reporting both serotype and biotype in severe H. influenzae induced disease is emphasized....

Physiotherapy and low back pain - part iii: outcomes research utilising the biosychosocial model: psychosocial outcomes

Directory of Open Access Journals (Sweden)

L. D. Bardin

2003-02-01

has evolved that necessitates the use of a biopsychosocial model, focusing on illness rather than disease and incorporating the biological, psychological and social aspects that are important to understand and to study LBP in its chronic form. Traditional outcome measures that measure elements within the biological component are limited to assess the spectrum of impacts caused by chronic low back pain (CLBP and the validity, reliability and sensitivity of some of these measures has been questioned.Few physiologic tests of spine function are clinically meaningful to patients, objective physical findings can be absent, and in CLBP disability and activity intolerance are often disproportional to the original injury. Biological outcomes should be complemented by outcomes of the psychosocial aspects of back pain that measure the considerable functional and emotional impact on the quality of life of patients experiencing low back dysfunction. Outcomes research is an analysis of clinical practice as it actually occurs and can  make a valuable contribution to understanding the multidimensional impact of LBP. Psychosocial aspects of the biopsychosocial model for outcomes research are discussed in part III: functional status/disability, psychological impairment, patient satisfaction, health related quality of life

Toxic and hazardous chemicals, Title III and communities: An outreach manual for community groups

International Nuclear Information System (INIS)

McNeil, C.; Arkin, E.B.; McCallum, D.

1989-09-01

The manual was prepared for State and local government officials, local emergency planning committee (LEPCs), and other community groups that want to make Title III work. It is intended as a practical guide for those who have little or no previous experience in the field of communication, whose time must be snatched from home and office, and whose resources are limited. The manual has three major sections: Part I discusses planning, which is vital to the success of a communication program; Part II suggests ways to get and keep people involved, especially important because Title III affects so many different sectors of the community; Part III, a how-to-do-it section, talks about specific tasks, such as giving a speech or writing a press release. Appendices include a detailed explanation of the law, a glossary, a list of recent studies related to Title III communications, a list of educational materials, and a list of State contacts

ALPS, Advanced Loose Parts System for Paks NPP

International Nuclear Information System (INIS)

Por, G.; Szappanos, G.

2001-01-01

Advanced Loose Parts System has two unique features to improve the missed alarm and false alarm rates, which are the major drawbacks of all existing loose parts system. Event selection is based on sequential probability ratio test of whitened signal by auto-regressive modelling, and the classification (as well as localisation) of the events is based on a selflearning artificial intelligence method. Examples of rather good sensitivity of events detection are presented in case of very weak signals, for bursts half-buried in background. Burst found in recorded signals were partly identified having origin in motor operated valve (MOV) vibration. The new feature of the system, namely, automatic recording during start up of main coolant pumps had been successfully tested in this year.(author)

Bonneville Power Administration (BPA) and Washington Public Power Supply System (WPPSS). Part III. Oversight hearing before the Subcommittee on Mining, Forest Management, and Bonneville Power Administration of the Committee on Interior and Insular Affairs, House of Representatives, Ninety-Eight Congress, Second Session, March 28 and August 2, 1984

International Nuclear Information System (INIS)

Anon.

1986-01-01

Part III of the hearing record contains the testimony of Peter Johnson, Bonneville Power Administration (BPA) Administrator, and Energy Secretary Donald Hodel on the subject of BPA's contracts with the Washington Public Power Supply System (WPPSS) in which BPA will assume responsibility of WPPSS nuclear projects 1, 2, and 3. At issue was whether the contracts exceed BPA's authority and the protection of BPA's $1.9 billion invested in the projects. Johnson denied any secret agreements and emphasized that the intent was to preserve the assets for the federal government and federal power system. On the second hearing day, Hodel explained DOE's involvement in the agreements and its concurrence with BPA because of related litigation. An appendix with additional correspondence and statements submitted for the record follows the testimony

Involvement of peripheral III nerve in multiple sclerosis patient: Report of a new case and discussion of the underlying mechanism.

Science.gov (United States)

Shor, Natalia; Amador, Maria Del Mar; Dormont, Didier; Lubetzki, Catherine; Bertrand, Anne

2017-04-01

Multiple sclerosis (MS) is a chronic disorder that affects the central nervous system myelin. However, a few radiological cases have documented an involvement of peripheral cranial nerves, within the subarachnoid space, in MS patients. We report the case of a 36-year-old female with a history of relapsing-remitting (RR) MS who consulted for a subacute complete paralysis of the right III nerve. Magnetic resonance imaging (MRI) examination showed enhancement and thickening of the cisternal right III nerve, in continuity with a linear, mesencephalic, acute demyelinating lesion. Radiological involvement of the cisternal part of III nerve has been reported only once in MS patients. Radiological involvement of the cisternal part of V nerve occurs more frequently, in almost 3% of MS patients. In both situations, the presence of a central demyelinating lesion, in continuity with the enhancement of the peripheral nerve, suggests that peripheral nerve damage is a secondary process, rather than a primary target of demyelination.

Neuro-diffuse algorithm for neutronic power identification of TRIGA Mark III reactor; Algoritmo neuro-difuso para la identificacion de la potencia neutronica del reactor Triga Mark III

Energy Technology Data Exchange (ETDEWEB)

Rojas R, E.; Benitez R, J. S. [Instituto Tecnologico de Toluca, Division de Estudios de Posgrado e Investigacion, Av. Tecnologico s/n, Ex-Rancho La Virgen, 50140 Metepec, Estado de Mexico (Mexico); Segovia de los Rios, J. A.; Rivero G, T. [ININ, Gerencia de Ciencias Aplicadas, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)], e-mail: jorge.benitez@inin.gob.mx

2009-10-15

In this work are presented the results of design and implementation of an algorithm based on diffuse logic systems and neural networks like method of neutronic power identification of TRIGA Mark III reactor. This algorithm uses the punctual kinetics equation as data generator of training, a cost function and a learning stage based on the descending gradient algorithm allow to optimize the parameters of membership functions of a diffuse system. Also, a series of criteria like part of the initial conditions of training algorithm are established. These criteria according to the carried out simulations show a quick convergence of neutronic power estimated from the first iterations. (Author)

Technological Advancement in Tower-Based Canopy Reflectance Monitoring: The AMSPEC-III System.

Science.gov (United States)

Tortini, Riccardo; Hilker, Thomas; Coops, Nicholas C; Nesic, Zoran

2015-12-19

Understanding plant photosynthesis, or Gross Primary Production (GPP), is a crucial aspect of quantifying the terrestrial carbon cycle. Remote sensing approaches, in particular multi-angular spectroscopy, have proven successful for studying relationships between canopy-reflectance and plant-physiology processes, thus providing a mechanism to scale up. However, many different instrumentation designs exist and few cross-comparisons have been undertaken. This paper discusses the design evolution of the Automated Multiangular SPectro-radiometer for Estimation of Canopy reflectance (AMSPEC) series of instruments. Specifically, we assess the performance of the PP-Systems Unispec-DC and Ocean Optics JAZ-COMBO spectro-radiometers installed on an updated, tower-based AMSPEC-III system. We demonstrate the interoperability of these spectro-radiometers, and the results obtained suggest that JAZ-COMBO can successfully be used to substitute more expensive measurement units for detecting and investigating photosynthesis and canopy spectra. We demonstrate close correlations between JAZ-COMBO and Unispec-DC measured canopy radiance (0.75 ≤ R² ≤ 0.85) and solar irradiance (0.95 ≤ R² ≤ 0.96) over a three month time span. We also demonstrate close agreement between the bi-directional distribution functions obtained from each instrument. We conclude that cost effective alternatives may allow a network of AMSPEC-III systems to simultaneously monitor various vegetation types in different ecosystems. This will allow to scale and improve our understanding of the interactions between vegetation physiology and spectral characteristics, calibrate broad-scale observations to stand-level measurements, and ultimately lead to improved understanding of changing vegetation spectral features from satellite.

Automatic characterization of loose parts impact damage risk parameters

International Nuclear Information System (INIS)

Glass, S.W.; Phillips, J.M.

1985-01-01

Loose parts caught in the high-velocity flows of the reactor coolant fluid strike against nuclear steam supply system (NSSS) components and can cause significant damage. Loose parts monitor systems (LPMS) have been available for years to detect metal-to-metal impacts. Once detected, however, an assessment of the damage risk potential for leaving the part in the system versus shutting it down and removing the part must be made. The principal parameters used in the damage risk assessment are time delays between the first and subsequent sensor indications (used to assess the impact location) and a correlation between the waveform and the impact energy of the part (how hard the part impacted). These parameters are not well suited to simple automatic techniques. The task has historically been performed by loose parts diagnostic experts who base much of their evaluation on experience and subjective interpretation of impact data waveforms. Three of the principal goals in developing the Babcock and Wilcox (B and W) LPMS-III were (a) to develop an accurate automatic assessment for the time delays, (b) to develop an automatic estimate of the impact energy, and (c) to present the data in a meaningful manner to the operator

Development of a software for the control of the quality management system of the TRIGA-Mark III reactor; Desarrollo de un software para el control del sistema de gestion de calidad del reactor TRIGA Mark III

Energy Technology Data Exchange (ETDEWEB)

Herrera A, E. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Hernandez, L.V.; Hernandez, J.A. [UAEM, Depto. de Ingenieria en Computacion, 50000 Toluca, estado de Mexico (Mexico)]. e-mail: eha@nuclear.inin.mx

2006-07-01

The quality has not only become one of the essential requirements of the product but rather at the presenme it is a strategic factor key of which depends the bigger part of the organizations, not only to maintain their position in the market but also to assure their survival. The good organizations will have processes, procedures and standards to confront these challenges. The big organizations require of the certification of their administration systems, and once the organization has obtained this certification the following step it is to maintain it. The implementation and certification of an administration system requires of an appropriate operative organization that achieves continuous improvements in their operation. This is the case of the TRIGA Mark III reactor, which contains a computer program that upgrades, it controls and it programs activities to develop in the Installation, allowing one operative organization to the whole personnel of the same one. With the purpose of avoiding activities untimely. (Author)

COPMA-III - Intelligent handling of existing procedures

International Nuclear Information System (INIS)

Hulsund, John-Einar; Jung, Yeonsub; Nilsen, Svein

1999-04-01

This report describes how COPMA-III makes it possible to enhance old procedures without having to change much of their original layout. By means of COPMA-III one can insert into the old procedure text tags that describe the 'meaning' of the various textual elements in the procedure. Those tags can be made invisible to the person using the procedure, but the computer is able to inspect the tags and give appropriate assistance in carrying through the procedure. Previous versions of COPMA required a reformulation and most often a re-structuring of the procedures before taking them into use. A fixed set of instructions and a fixed procedure structure made the computerised procedure different from the original procedure (in most cases). This is no more so in COPMA-III. By means of small procedural elements (microelements), it is possible to configure the COPMA-III system to fit the set of instructions and the procedure structure that is being used in the old procedure system. This report describes an example case, starting with an old procedure, goes through a set of working steps and ends up with a procedure having exactly the same appearance as the old procedure, but having assistance from the COPMA-III system in executing the procedure (author) (ml)

SPSP Phase III Recruiting, Selecting, and Developing Secure Power Systems Professionals: Behavioral Interview Guidelines by Job Roles

Energy Technology Data Exchange (ETDEWEB)

O' Neil, Lori Ross [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Conway, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tobey, D. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Greitzer, Frank L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dalton, Angela C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pusey, Portia K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-03-01

The Secure Power Systems Professional Phase III final report was released last year which an appendix of Behavioral Interview Guidelines by Job Roles. This new report is that appendix broken out as a standalone document to assist utilities in recruiting and developing Secure Power Systems Professionals at their site.

Theoretical analysis of nuclear reactors (Phase III), I-V, Part III, Reactor poisoning; Razrada metoda teorijske analize nuklearnih reaktora (III faza) I-IV, III Deo, Zatrovanje reaktora

Energy Technology Data Exchange (ETDEWEB)

Pop-Jordanov, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1963-01-15

Report on calculation of poisoning in experimental and power reactor includes four parts. Part one describes the influence of poisoning on the physical parameters of a reactor. part two includes transformation of differential equations for iodine and xenon. It was needed for easier solution of of differential equation using the analog computer. This calculation was done for RA reactor operating at 5 MW power. The RA reactor was used an example of calculation by the proposed method. Part four shows the application of the method for calculating the Calder Hall power reactor.

Global transcriptional profiling of Burkholderia pseudomallei under salt stress reveals differential effects on the Bsa type III secretion system

Directory of Open Access Journals (Sweden)

Singsuksawat Ekapot

2010-06-01

Full Text Available Abstract Background Burkholderia pseudomallei is the causative agent of melioidosis where the highest reported incidence world wide is in the Northeast of Thailand, where saline soil and water are prevalent. Moreover, recent reports indicate a potential pathogenic role for B. pseudomallei in cystic fibrosis lung disease, where an increased sodium chloride (NaCl concentration in airway surface liquid has been proposed. These observations raise the possibility that high salinity may represent a favorable niche for B. pseudomallei. We therefore investigated the global transcriptional response of B. pseudomallei to increased salinity using microarray analysis. Results Transcriptome analysis of B. pseudomallei under salt stress revealed several genes significantly up-regulated in the presence of 320 mM NaCl including genes associated with the bsa-derived Type III secretion system (T3SS. Microarray data were verified by reverse transcriptase-polymerase chain reactions (RT-PCR. Western blot analysis confirmed the increased expression and secretion of the invasion-associated type III secreted proteins BipD and BopE in B. pseudomallei cultures at 170 and 320 mM NaCl relative to salt-free medium. Furthermore, salt-treated B. pseudomallei exhibited greater invasion efficiency into the lung epithelial cell line A549 in a manner partly dependent on a functional Bsa system. Conclusions B. pseudomallei responds to salt stress by modulating the transcription of a relatively small set of genes, among which is the bsa locus associated with invasion and virulence. Expression and secretion of Bsa-secreted proteins was elevated in the presence of exogenous salt and the invasion efficiency was enhanced. Our data indicate that salinity has the potential to influence the virulence of B. pseudomallei.

Quality assurance in a cask fleet parts control system

International Nuclear Information System (INIS)

Fernandez, C.; McCreery, P.N.; Shappert, L.B.

1991-01-01

Applicable portions of the eighteen Quality Assurance criteria of Subpart H, 10 CFR 71 are incorporated into a relational data base system which has been designed to manage the spare parts control system for a fleet of spent nuclear fuel casks. The system includes not only parts in warehouse storage but parts in use in the field plus casks, ancillary equipment, test equipment, support devices, and even personnel. It provides a high degree of assurance that any device for which a condition for certification has expired will be flagged for recertification testing or removal from service well before the critical date

Constraining the Statistics of Population III Binaries

Science.gov (United States)

Stacy, Athena; Bromm, Volker

2012-01-01

We perform a cosmological simulation in order to model the growth and evolution of Population III (Pop III) stellar systems in a range of host minihalo environments. A Pop III multiple system forms in each of the ten minihaloes, and the overall mass function is top-heavy compared to the currently observed initial mass function in the Milky Way. Using a sink particle to represent each growing protostar, we examine the binary characteristics of the multiple systems, resolving orbits on scales as small as 20 AU. We find a binary fraction of approx. 36, with semi-major axes as large as 3000 AU. The distribution of orbital periods is slightly peaked at approx. < 900 yr, while the distribution of mass ratios is relatively flat. Of all sink particles formed within the ten minihaloes, approx. 50 are lost to mergers with larger sinks, and 50 of the remaining sinks are ejected from their star-forming disks. The large binary fraction may have important implications for Pop III evolution and nucleosynthesis, as well as the final fate of the first stars.

The removal of toxic metals from liquid effluents by ion exchange resins. Part IV: Chromium(III)/H+ /Lewatit SP112; La eliminación de metales tóxicos presentes en efluentes líquidos mediante resinas de cambio iónico. Parte IV: cromo(III)/H+/Lewatit SP112

Energy Technology Data Exchange (ETDEWEB)

Alguacil, F.J.

2017-09-01

This investigation presented results on the removal of chromium(III), from aqueous solution in the 0-5 pH range, using Lewatit SP112 cationic exchange resin. Several aspects affecting the ion exchange process were evaluated, including: the influence of the stirring speed, temperature, pH of the solution, resin dosage and aqueous ionic strength. The selectivity of the system was tested against the presence of other metals in the aqueous solution, whereas the removal of chromium(III) from solutions was compared with results obtained using multiwalled carbon nanotubes as adsorbents. From the batch experimental data, best fit of the results is obtained with the Langmuir model, whereas the ion exchange process is best explained by the pseudo-second order model, moreover, experimental data responded well to the film-diffusion controlled model. Elution of the chromium(III) loaded into the resin is well accomplished by the use of sodium hydroxide solutions. [Spanish] En este trabajo se presentan los resultados obtenidos en la eliminación de cromo(III) de disoluciones acuosas (pH 0-5) mediante la resina de intercambio catiónico Lewatit SP112. Se han investigado algunas variables que pueden afectar al sistema: influencia de la agitación, temperatura, pH y fuerza iónica del medio acuoso y cantidad de resina; también se ha investigado acerca de la selectividad del sistema cuando otros metales están presentes en el medio acuoso, comparándose los resultados de la eliminación del cromo(III) usando la resina con los resultados obtenidos cuando se emplea otro adsorbente como son los nanotubos de carbono de pared múltiple. Los resultados experimentales indican que la carga del cromo(III) en la resina responde mejor al modelo de Langmuir, mientras que los modelos cinéticos indican que la carga del metal en la resina responde al modelo de pseudo-segundo orden y difusión en la capa límite. La elución del cromo(III) se realiza con disoluciones de hidróxid.

World Energy Data System (WENDS). Volume III. Country data, LY-PO

Energy Technology Data Exchange (ETDEWEB)

None

1979-06-01

The World Energy Data System contains organized data on those countries and international organizations that may have critical impact on the world energy scene. Included in this volume, Vol. III, are Libya, Luxembourg, Malaysia, Mexico, Netherlands, New Zealand, Niger, Nigeria, Norway, Pakistan, Peru, Philippines, Poland, and Portugal. The following topics are covered for most of the countries: economic, demographic, and educational profiles; energy policy; indigenous energy resources and uses; forecasts, demand, exports, imports of energy supplies; environmental considerations of energy supplies; power production facilities; energy industries; commercial applications of energy; research and development activities of energy; and international activities.

Elasto-dynamic analysis of a gear pump-Part III: Experimental validation procedure and model extension to helical gears

Science.gov (United States)

Mucchi, E.; Dalpiaz, G.

2015-01-01

This work concerns external gear pumps for automotive applications, which operate at high speed and low pressure. In previous works of the authors (Part I and II, [1,2]), a non-linear lumped-parameter kineto-elastodynamic model for the prediction of the dynamic behaviour of external gear pumps was presented. It takes into account the most important phenomena involved in the operation of this kind of machine. The two main sources of noise and vibration are considered: pressure pulsation and gear meshing. The model has been used in order to foresee the influence of working conditions and design modifications on vibration generation. The model's experimental validation is a difficult task. Thus, Part III proposes a novel methodology for the validation carried out by the comparison of simulations and experimental results concerning forces and moments: it deals with the external and inertial components acting on the gears, estimated by the model, and the reactions and inertial components on the pump casing and the test plate, obtained by measurements. The validation is carried out comparing the level of the time synchronous average in the time domain and the waterfall maps in the frequency domain, with particular attention to identify system resonances. The validation results are satisfactory globally, but discrepancies are still present. Moreover, the assessed model has been properly modified for the application to a new virtual pump prototype with helical gears in order to foresee gear accelerations and dynamic forces. Part IV is focused on improvements in the modelling and analysis of the phenomena bound to the pressure evolution around the gears in order to achieve results closer to the measured values. As a matter of fact, the simulation results have shown that a variable meshing stiffness has a notable contribution on the dynamic behaviour of the pump but this is not as important as the pressure phenomena. As a consequence, the original model was modified with the

Sparkle/PM3 for the modeling of europium(III), gadolinium(III), and terbium(III) complexes

International Nuclear Information System (INIS)

Freire, Ricardo O.; Rocha, Gerd B.; Simas, Alfredo M.

2009-01-01

The Sparkle/PM3 model is extended to europium(III), gadolinium(III), and terbium(III) complexes. The validation procedure was carried out using only high quality crystallographic structures, for a total of ninety-six Eu(III) complexes, seventy Gd(III) complexes, and forty-two Tb(III) complexes. The Sparkle/PM3 unsigned mean error, for all interatomic distances between the trivalent lanthanide ion and the ligand atoms of the first sphere of coordination, is: 0.080 A for Eu(III); 0.063 A for Gd(III); and 0.070 A for Tb(III). These figures are similar to the Sparkle/AM1 ones of 0.082 A, 0.061 A, and 0.068 A respectively, indicating they are all comparable parameterizations. Moreover, their accuracy is similar to what can be obtained by present-day ab initio effective core potential full geometry optimization calculations on such lanthanide complexes. Finally, we report a preliminary attempt to show that Sparkle/PM3 geometry predictions are reliable. For one of the Eu(III) complexes, BAFZEO, we created hundreds of different input geometries by randomly varying the distances and angles of the ligands to the central Eu(III) ion, which were all subsequently fully optimized. A significant trend was unveiled, indicating that more accurate local minima geometries cluster at lower total energies, thus reinforcing the validity of sparkle model calculations. (author)

T-scan III system diagnostic tool for digital occlusal analysis in orthodontics - a modern approach.

Science.gov (United States)

Trpevska, Vesna; Kovacevska, Gordana; Benedeti, Alberto; Jordanov, Bozidar

2014-01-01

This systematic literature review was performed to establish the mechanism, methodology, characteristics, clinical application and opportunities of the T-Scan III System as a diagnostic tool for digital occlusal analysis in different fields of dentistry, precisely in orthodontics. Searching of electronic databases, using MEDLINE and PubMed, hand searching of relevant key journals, and screening of reference lists of included studies with no language restriction was performed. Publications providing statistically examined data were included for systematic review. Twenty potentially relevant Randomized Controlled Trials (RCTs) were identified. Only ten met the inclusion criteria. The literature demonstrates that using digital occlusal analysis with T-Scan III System in orthodontics has significant advantage with regard to the capability of measuring occlusal parameters in static positions and during dynamic of the mandible. Within the scope of this systematic review, there is evidence to support that T-Scan system is rapid and accurate in identifying the distribution of the tooth contacts and it shows great promise as a clinical diagnostic screening device for occlusion and for improving the occlusion after various dental treatments. Additional clinical studies are required to advance the indication filed of this system. Importance of using digital occlusal T-Scan analysis in orthodontics deserves further investigation.

''Big Dee'' upgrade of the Doublet III diagnostic data acquisition computer system

International Nuclear Information System (INIS)

Mcharg, B.B.

1983-01-01

The ''Big Dee'' upgrade of the Doublet III tokamak facility will begin operation in 1986 with an initial quantity of data expected to be 10 megabytes per shot and eventually attaining 20-25 megabytes per shot. This is in comparison to the 4-5 megabytes of data currently acquired. To handle this greater quantity of data and to serve physics needs for significantly improved between-shot processing of data will require a substantial upgrade of the existing data acquisition system. The key points of the philosophy that have been adopted for the upgraded system to handle the greater quantity of data are (1) preserve existing hardware, (2) preserve existing software; (3) configure the system in a modular fashion; and (4) distribute the data acquisition over multiple computers. The existing system using ModComp CLASSIC 16 bit minicomputers is capable of handling 5 megabytes of data per shot

Big Dee upgrade of the Doublet III diagnostic data acquisition computer system

International Nuclear Information System (INIS)

McHarg, B.B. Jr.

1983-12-01

The Big Dee upgrade of the Doublet III tokamak facility will begin operation in 1986 with an initial quantity of data expected to be 10 megabytes per shot and eventually attaining 20 to 25 megabytes per shot. This is in comparison to the 4 to 5 megabytes of data currently acquired. To handle this greater quantity of data and to serve physics needs for significantly improved between-shot processing of data will require a substantial upgrade of the existing data acquisition system. The key points of the philosophy that have been adopted for the upgraded system to handle the greater quantity of data are (1) preserve existing hardware; (2) preserve existing software; (3) configure the system in a modular fashion; and (4) distribute the data acquisition over multiple computers. The existing system using ModComp CLASSIC 16 bit minicomputers is capable of handling 5 megabytes of data per shot

Quantum systems related to root systems and radial parts of Laplace operators

OpenAIRE

Olshanetsky, M. A.; Perelomov, A. M.

2002-01-01

The relation between quantum systems associated to root systems and radial parts of Laplace operators on symmetric spaces is established. From this it follows the complete integrability of some quantum systems.

Intelligent control of HVAC systems. Part II: perceptron performance analysis

Directory of Open Access Journals (Sweden)

Ioan URSU

2013-09-01

Full Text Available This is the second part of a paper on intelligent type control of Heating, Ventilating, and Air-Conditioning (HVAC systems. The whole study proposes a unified approach in the design of intelligent control for such systems, to ensure high energy efficiency and air quality improving. In the first part of the study it is considered as benchmark system a single thermal space HVAC system, for which it is assigned a mathematical model of the controlled system and a mathematical model(algorithm of intelligent control synthesis. The conception of the intelligent control is of switching type, between a simple neural network, a perceptron, which aims to decrease (optimize a cost index,and a fuzzy logic component, having supervisory antisaturating role for neuro-control. Based on numerical simulations, this Part II focuses on the analysis of system operation in the presence only ofthe neural control component. Working of the entire neuro-fuzzy system will be reported in a third part of the study.

Parts of the Whole: Approaching Education as a System

Directory of Open Access Journals (Sweden)

Dorothy Wallace

2009-07-01

Full Text Available An educational system is a highly coupled complex system of inputs, outputs, sensors and actuators. Using an engineering perspective, this column begins the process of naming and categorizing parts of the system. It then focuses on teachers as one part of a large system, and analyzes the forces that influence how teachers work, and that draw or repel individuals to a teaching career. The growing shortage of qualified teachers can be explained by properties of the system as a whole that determine the context in which teachers do their job.

Biomimetic oxidation of piperine and piplartine catalyzed by iron(III) and manganese(III) porphyrins.

Science.gov (United States)

Schaab, Estela Hanauer; Crotti, Antonio Eduardo Miller; Iamamoto, Yassuko; Kato, Massuo Jorge; Lotufo, Letícia Veras Costa; Lopes, Norberto Peporine

2010-01-01

Synthetic metalloporphyrins, in the presence of monooxygen donors, are known to mimetize various reactions of cytochrome P450 enzymes systems in the oxidation of drugs and natural products. The oxidation of piperine and piplartine by iodosylbenzene using iron(III) and manganese(III) porphyrins yielded mono- and dihydroxylated products, respectively. Piplartine showed to be a more reactive substrate towards the catalysts tested. The structures of the oxidation products were proposed based on electrospray ionization tandem mass spectrometry.

Quality assurance in a cask fleet parts control system

International Nuclear Information System (INIS)

Fernandez, C.; Shappert, L.B.

1992-01-01

This paper discusses applicable portions of the eighteen Quality Assurance criteria of Subpart H, 10 CFR 71 which are incorporated into a relational data base system which has been designed to manage the spare parts control system for a fleet of spent nuclear fuel casks. The system includes not only parts in warehouse storage but parts in use in the field plus casks, ancillary equipment, test equipment, support devices, and even personnel. It provides a high degree of assurance that any device for which a condition for certification has expired will be flagged for recertification testing or removal from service well before the critical date

Uranium (III)-Plutonium (III) co-precipitation in molten chloride

Science.gov (United States)

Vigier, Jean-François; Laplace, Annabelle; Renard, Catherine; Miguirditchian, Manuel; Abraham, Francis

2018-02-01

Co-management of the actinides in an integrated closed fuel cycle by a pyrochemical process is studied at the laboratory scale in France in the CEA-ATALANTE facility. In this context the co-precipitation of U(III) and Pu(III) by wet argon sparging in LiCl-CaCl2 (30-70 mol%) molten salt at 705 °C is studied. Pu(III) is prepared in situ in the molten salt by carbochlorination of PuO2 and U(III) is then introduced as UCl3 after chlorine purge by argon to avoid any oxidation of uranium up to U(VI) by Cl2. The oxide conversion yield through wet argon sparging is quantitative. However, the preferential oxidation of U(III) in comparison to Pu(III) is responsible for a successive conversion of the two actinides, giving a mixture of UO2 and PuO2 oxides. Surprisingly, the conversion of sole Pu(III) in the same conditions leads to a mixture of PuO2 and PuOCl, characteristic of a partial oxidation of Pu(III) to Pu(IV). This is in contrast with coconversion of U(III)-Pu(III) mixtures but in agreement with the conversion of Ce(III).

Ferrous-activated persulfate oxidation of arsenic(III) and diuron in aquatic system

International Nuclear Information System (INIS)

Zhou, Lei; Zheng, Wei; Ji, Yuefei; Zhang, Jinfeng; Zeng, Chao; Zhang, Ya; Wang, Qi; Yang, Xi

2013-01-01

Highlights: • Effective oxidation of As(III)/diuron is achieved by Fe(II)-activated persulfate. • Hydroxyl and sulfate radical play important roles in As(III) and diuron oxidation. • CA and Na 2 S 2 O 3 are efficient and environmental friendly chelating agents. • DFT calculation is found to be useful for degradation products prediction. -- Abstract: In situ chemical oxidation (ISCO) can be an effective technology for the remediation of soil and groundwater polluted by organic and inorganic contaminants. This study investigated the oxidation of arsenic(III) (As(III)) and diuron using ferrous activated persulfate-based ISCO. The results indicated that Fe(II)/persulfate oxidation could be an effective method to oxidize As(III) and diuron. Effects of pH, S 2 O 8 2− and Fe(II) amounts on the destruction of As(III) and diuron were examined in batch experiments. Acidic conditions favored the removal of As(III) and diuron. Four chelating agents, citric acid (CA), Na 2 S 2 O 3 , diethylene triamine pentaacetic acid (DTPA) and ethylene diamine tetraacetic acid disodium (EDTA-Na 2 ) were used in attempt to maintain the quantity of ferrous ion in solution. In our experiments, CA and Na 2 S 2 O 3 were found to be more effective than DTPA and EDTA-Na 2 . Our results also revealed a widely practical prospect of inorganic chelating agent Na 2 S 2 O 3 . Hydroxyl and sulfate radical were determined to play key roles in the oxidation process by using ethanol and tertiary butanol as molecular probes. Oxidation of As(III) yielded As(V) via the electron-transfer reaction. In the oxidation process of diuron, a stepwise nucleophilic substitution of chlorine by hydroxyl and a stepwise oxidation process of the methyl on the dimethylurea group by hydroxyl and sulfate radical were proposed

[Orthodontic treatment of malocclusion Class III in patients aged 6-12 by Postnikov appliance, face mask and bracket system].

Science.gov (United States)

Postnikov, M A; Trunin, D A; Pankratova, N V; Nesterov, A M; Sadykov, M I; Ostankov, S A

2018-01-01

The diagnostics and treatment of malocclusion Class III in patients aged 6-12 is an vital problem in orthodontics. Method of orthodontic treatment of malocclusion Class III in patients with the help of improved and patented orthodontic construction - 'Postnikov appliance' - and face mask and bracket system is analysed in the article. Orthodontic treatment of malocclusion Class III was examined in 24 patients aged 6-12 by the suggested method. All patients were examined clinically and with the help af additional diagnostic methods: head cephalometry in lateral position with further data analysis in Dolphin Imaging (USA). The use of computer technologies in Dolphin Imaging helps to controll the process of correction of dentition correlation in different stages of treatment, to reduce the period of treatment of malocclusion Class III in patients aged 6-12 and to improve face esthetics and life quality ratio.

Neuro-diffuse algorithm for neutronic power identification of TRIGA Mark III reactor

International Nuclear Information System (INIS)

Rojas R, E.; Benitez R, J. S.; Segovia de los Rios, J. A.; Rivero G, T.

2009-10-01

In this work are presented the results of design and implementation of an algorithm based on diffuse logic systems and neural networks like method of neutronic power identification of TRIGA Mark III reactor. This algorithm uses the punctual kinetics equation as data generator of training, a cost function and a learning stage based on the descending gradient algorithm allow to optimize the parameters of membership functions of a diffuse system. Also, a series of criteria like part of the initial conditions of training algorithm are established. These criteria according to the carried out simulations show a quick convergence of neutronic power estimated from the first iterations. (Author)

Damage evaluation system for materials used in fossil thermal power plants

Energy Technology Data Exchange (ETDEWEB)

Okamura, Hiroyuki [Science Univ. of Tokyo (Japan); Sakai, Shinsuke [Tokyo Univ. (Japan); Tomita, Akira [Japan Power Engineering and Inspection Corp., Tokyo (Japan); Koyama, Teruo [Babcock Hitachi K.K., Tokyo (Japan); Sakurai, Shigeo; Kawasaki, Yoshiya [Hitachi Ltd., Ibaraki (Japan)

1998-11-01

The summary of this research paper is as follows: The fundamental design of the damage evaluation system is carried out based on the basic concept. Prototype systems for boilers and turbines have been constructed: (a) Boiler: (I) Evaluation part: Outer surface of the primary pendant superheater tube; (II) Damage mode: Creep; (III) Damage evaluation method: Hardness measurement method; (b) Turbine: (I) Evaluation part: Inner surface at the center bore of high pressure turbine rotor; (II) Damage mode: Creep; (III) Damage evaluation method: Electric potential method. (orig./MM)

Inteligencia Artificial y Neurología. (III Parte

Directory of Open Access Journals (Sweden)

Mario Camacho Pinto

1987-04-01

Full Text Available

De acuerdo con mi anuncio esta III Parte estaría constituida por los mecanismos cerebrales susceptibles de extrapolación tal como fueron enumerados por mí: control de input-output para realizar conductas, y de inteligencia y aprendizaje, de los cuales por razón de espacio sólo se publica la mitad en esta edición de Medicina. Se trata de una presentación esquemática, auncuando ahora encuentro quizás más atractivo el enfoque de J’urgen Ruech expuesto en el Capítulo Comunicación y Psiquiatría de la obra extensa de Freedman (1 así: Input = percepción; análisis de datos = reconocimiento; procesamiento de datos = pensamiento; almacenamiento de datos = memoria; output = expresión y acción. A mi modo de ver se completaría este encuadre funcional con el tópico aprendizaje, proceso contiguo al de la memoria. Antes de entrar en materia hago unas consideraciones preliminares. En la primera me refiero a otro enfoque del concepto de LA. no incluido anteriormente. Se trata de Schank Roger y Hunter Larry (2 para quienes las indagaciones a que conduce el trasegar acerca de lA son las más atrevidas de nuestra existencia: ¿cuál es la naturaleza de la mente, qué pasa cuando estamos pensando, sintiendo, viendo o entendiendo? ¿Es posible comprender cómo trabaja nuestra mente realmente? Preguntas milenarias en cuyas respuestas no se ha registrado progreso. La lA ofrece una nueva herramienta para avanzar en este sentido: el computador.

Las teorías sobre la mente han consistido en procesos descriptivos. Y los planteamientos iníciales hechos sobre lA por los investigadores han sido enfocados hacia lo que ellos mismos consideraron como manifestaciones de alta inteligencia: problemas matemáticos, ajedrez, rompecabezas complejos, etc.; gran cantidad de energía fue dedicada y se encontraron técnicas computacionales exitosas. Pero se comprendió que las técnicas desarrolladas no eran las mismas que emplea el cerebro, por lo cual se

PIO I-II tendencies. Part 2. Improving the pilot modeling

Directory of Open Access Journals (Sweden)

Ioan URSU

2011-03-01

Full Text Available The study is conceived in two parts and aims to get some contributions to the problem ofPIO aircraft susceptibility analysis. Part I, previously published in this journal, highlighted the mainsteps of deriving a complex model of human pilot. The current Part II of the paper considers a properprocedure of the human pilot mathematical model synthesis in order to analyze PIO II typesusceptibility of a VTOL-type aircraft, related to the presence of position and rate-limited actuator.The mathematical tools are those of semi global stability theory developed in recent works.

Small-Molecule Inhibitors of the Type III Secretion System

Directory of Open Access Journals (Sweden)

Lingling Gu

2015-09-01

Full Text Available Drug-resistant pathogens have presented increasing challenges to the discovery and development of new antibacterial agents. The type III secretion system (T3SS, existing in bacterial chromosomes or plasmids, is one of the most complicated protein secretion systems. T3SSs of animal and plant pathogens possess many highly conserved main structural components comprised of about 20 proteins. Many Gram-negative bacteria carry T3SS as a major virulence determinant, and using the T3SS, the bacteria secrete and inject effector proteins into target host cells, triggering disease symptoms. Therefore, T3SS has emerged as an attractive target for antimicrobial therapeutics. In recent years, many T3SS-targeting small-molecule inhibitors have been discovered; these inhibitors prevent the bacteria from injecting effector proteins and from causing pathophysiology in host cells. Targeting the virulence of Gram-negative pathogens, rather than their survival, is an innovative and promising approach that may greatly reduce selection pressures on pathogens to develop drug-resistant mutations. This article summarizes recent progress in the search for promising small-molecule T3SS inhibitors that target the secretion and translocation of bacterial effector proteins.

Má oclusão Classe III de Angle com discrepância ântero-posterior acentuada Angle Class III malocclusion with severe anteroposterior disharmony

Directory of Open Access Journals (Sweden)

Marcos Alan Vieira Bittencourt

2009-02-01

Full Text Available A má oclusão Classe III de Angle é caracterizada por uma discrepância dentária ântero-posterior, que pode ou não estar acompanhada por alterações esqueléticas. Em geral, o aspecto facial fica bastante comprometido, sendo justamente esse fator, na maioria das vezes, que motiva o paciente a procurar pelo tratamento. Este caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 4, ou seja, uma má oclusão com discrepância ântero-posterior acentuada, Classe III, com ANB menor ou igual a -2º, como parte dos requisitos para a obtenção do título de Diplomado pelo BBO.Angle Class III malocclusion is characterized by an anteroposterior dental discrepancy which may or may not be accompanied by skeletal changes. In general, distressed by a significantly compromised facial aspect, patients tend to seek treatment. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO, as representative of Category 4, i.e., a malocclusion with severe anteroposterior discrepancy, Class III, and ANB Angle equal to or smaller than -2º, as part of the requirements for obtaining the BBO Diploma.

Distribution and Translocation of 141Ce (III) in Horseradish

Science.gov (United States)

Guo, Xiaoshan; Zhou, Qing; Lu, Tianhong; Fang, Min; Huang, Xiaohua

2007-01-01

Background and Aims Rare earth elements (REEs) are used in agriculture and a large amount of them contaminate the environment and enter foods. The distribution and translocation of 141Ce (III) in horseradish was investigated in order to help understand the biochemical behaviour and toxic mechanism of REEs in plants. Method The distribution and translocation of 141Ce (III) in horseradish were investigated using autoradiography, liquid scintillation counting (LSC) and electron microscopic autoradiography (EMARG) techniques. The contents of 141Ce (III) and nutrient elements were analysed using an inductively coupled plasma-atomic emission spectrometer (ICP-AES). Results The results from autoradiography and LSC indicated that 141Ce (III) could be absorbed by horseradish and transferred from the leaf to the leaf-stalk and then to the root. The content of 141Ce (III) in different parts of horseradish was as follows: root > leaf-stalk > leaf. The uptake rates of 141Ce (III) in horseradish changed with the different organs and time. The content of 141Ce (III) in developing leaves was greater than that in mature leaves. The results from EMARG indicated that 141Ce (III) could penetrate through the cell membrane and enter the mesophyll cells, being present in both extra- and intra-cellular deposits. The contents of macronutrients in horseradish were decreased by 141Ce (III) treatment. Conclusions 141Ce (III) can be absorbed and transferred between organs of horseradish with time, and the distribution was found to be different at different growth stages. 141Ce (III) can enter the mesophyll cells via apoplast and symplast channels or via plasmodesmata. 141Ce (III) can disturb the metabolism of macronutrients in horseradish. PMID:17921527

Reactor oscillator - I - III, Part III - Electronic device; Reaktorski oscilator - I-III, III Deo - Elektronski uredjaj

Energy Technology Data Exchange (ETDEWEB)

Lolic, B; Jovanovic, S [Institute of Nuclear Sciences Boris Kidric, Laboratorija za fiziku reaktora, Vinca, Beograd (Serbia and Montenegro)

1961-12-15

This report describes functioning of the reactor oscillator electronic system. Two methods of oscillator operation were discussed. The first method is so called method of amplitude modulation of the reactor power, and the second newer method is phase method. Both methods are planned for the present reactor oscillator.

The type III secretion system is involved in the invasion and intracellular survival of Escherichia coli K1 in human brain microvascular endothelial cells

OpenAIRE

Yao, Yufeng; Xie, Yi; Perace, Donna; Zhong, Yi; Lu, Jie; Tao, Jing; Guo, Xiaokui; Kim, Kwang Sik

2009-01-01

Type III secretion systems have been documented in many Gram-negative bacteria, including enterohemorrhagic Escherichia coli. We have previously shown the existence of a putative type III secretion system in meningitis-causing E. coli K1 strains, referred to as E. coli type III secretion 2 (ETT2). The sequence of ETT2 in meningitis-causing E. coli K1 strain EC10 (O7:K1) revealed that ETT2 comprises the epr, epa and eiv genes, but bears mutations, deletions and insertions. We constructed the E...

Fe (III) complex of mefloquine hydrochloride: Synthesis ...

African Journals Online (AJOL)

As part of the ongoing research for more effective antimalarial drug, Fe (III) complex of mefloquine hydrochloride (antimalarial drug) was synthesized using template method. Mefloquine was tentatively found to have coordinated through the hydroxyl and the two nitrogen atoms in the quinoline and piperidine in the structure, ...

Hadron component of families (exp. 'Pamir' III)

International Nuclear Information System (INIS)

Anon.

1984-01-01

Possibilities of nuclear interaction investigation at 10 15 - 10 16 ev by means of analysis of family hadron component, registered in carbon and deep lead x-ray emulsion chambers, are discussed. The paper is divided in three parts. General properties of hadron families are discribed and compared in C and Pb chambers (part I). Correlations between gamma and hadron components of families are studied in the part II. It is shown that fluctuations of energies of this component are wider than in usually used models of nuclear interactions. The ratio of single hadron flux to the flux of γ-families is connected with cross-section and energy dissipation of nuclear interactions at about 10 16 ev (part III). (author)

Expression of adenylyl cyclase types III and VI in human hyperfunctioning thyroid nodules.

Science.gov (United States)

Celano, M; Arturi, F; Presta, I; Bruno, R; Scarpelli, D; Calvagno, M G; Cristofaro, C; Bulotta, S; Giannasio, P; Sacco, R; Filetti, S; Russo, D

2003-05-30

Hyperfunctioning thyroid nodules are characterized by the presence of spontaneous somatic mutations responsible for constitutive activation of the cAMP pathway. However, alterations affecting other elements of the cAMP signaling system may counteract the effects of the mutations. In this study, the expression of the adenylyl cyclase (AC) types III and VI was investigated by Western blot in 18 hyperfunctioning thyroid nodules; in 12 samples, we also assessed the presence of TSH receptor (TSHR) or gsp mutations and levels of AC VI and III mRNA. We found that the expression of nodular AC VI (but not AC III) was significantly lower (85.1% of normal, P=0.014) than the expression of both adenylyl cycles types of perinodular tissue from the same patients. Slightly, but not significant differences were detected in nodules with or without mutations and AC protein levels generally showed correlation with the levels of the transcripts detected by RT-PCR. In addition, AC III and AC VI expression levels within a given nodule were characterized by a significant positive correlation. These findings indicate that a diminished expression of AC type VI may be part of the mechanisms occurring in the hyperfunctioning nodules, independently of the presence of TSHR or gsp mutations, which influence the resulting phenotype.

77 FR 55371 - System Safety Program

Science.gov (United States)

2012-09-07

... Electrical Workers; Labor Council for Latin American Advancement;* League of Railway Industry Women... Vol. 77 Friday, No. 174 September 7, 2012 Part III Department of Transportation Federal Railroad... Railroad Administration 49 CFR Part 270 [Docket No. FRA-2011-0060, Notice No. 1] RIN 2130-AC31 System...

Advanced loose parts detection system for nuclear power plants

International Nuclear Information System (INIS)

Por, G.; Szappanos, G.

2000-01-01

The importance of loose part detection is discussed. The consequences of a relatively big (7.7 kg) loose part found in a WWER-440 NPP are discussed. A portable loose part monitoring system is presented, which is based on sequential probability ratio test. (author)

The OPAL phase III microvertex detector

International Nuclear Information System (INIS)

De Jong, S.

1997-01-01

A description of the OPAL Phase III microvertex detector is given. Special emphasis is put on problems that have been encountered in the installation and operation of the different phases of the OPAL microvertex detector leading to the present Phase III detector and their cures. A short description of the new OPAL radiation monitoring and beam dump system is also given. (orig.)

Chromosomal Targeting by the Type III-A CRISPR-Cas System Can Reshape Genomes in Staphylococcus aureus.

Science.gov (United States)

Guan, Jing; Wang, Wanying; Sun, Baolin

2017-01-01

CRISPR-Cas (clustered regularly interspaced short palindromic repeat [CRISPR]-CRISPR-associated protein [Cas]) systems can provide protection against invading genetic elements by using CRISPR RNAs (crRNAs) as a guide to locate and degrade the target DNA. CRISPR-Cas systems have been classified into two classes and five types according to the content of cas genes. Previous studies have indicated that CRISPR-Cas systems can avoid viral infection and block plasmid transfer. Here we show that chromosomal targeting by the Staphylococcus aureus type III-A CRISPR-Cas system can drive large-scale genome deletion and alteration within integrated staphylococcal cassette chromosome mec (SCC mec ). The targeting activity of the CRISPR-Cas system is associated with the complementarity between crRNAs and protospacers, and 10- to 13-nucleotide truncations of spacers partially block CRISPR attack and more than 13-nucleotide truncation can fully abolish targeting, suggesting that a minimal length is required to license cleavage. Avoiding base pairings in the upstream region of protospacers is also necessary for CRISPR targeting. Successive trinucleotide complementarity between the 5' tag of crRNAs and protospacers can disrupt targeting. Our findings reveal that type III-A CRISPR-Cas systems can modulate bacterial genome stability and may serve as a high-efficiency tool for deleting resistance or virulence genes in bacteria. IMPORTANCE Staphylococcus aureus is a pathogen that can cause a wide range of infections in humans. Studies have suggested that CRISPR-Cas systems can drive the loss of integrated mobile genetic elements (MGEs) by chromosomal targeting. Here we demonstrate that CRISPR-mediated cleavage contributes to the partial deletion of integrated SCC mec in methicillin-resistant S. aureus (MRSA), which provides a strategy for the treatment of MRSA infections. The spacer within artificial CRISPR arrays should contain more than 25 nucleotides for immunity, and consecutive

The OCaml system release 4.04: Documentation and user's manual

OpenAIRE

Leroy, Xavier; Doligez, Damien; Frisch, Alain; Garrigue, Jacques; Rémy, Didier; Vouillon, Jérôme

2016-01-01

This manual documents the release 4.04 of the OCaml system. It is organized as follows. Part I, "An introduction to OCaml", gives an overview of the language. Part II, "The OCaml language", is the reference description of the language. Part III, "The OCaml tools", documents the compilers, toplevel system, and programming utilities. Part IV, "The OCaml library", describes the modules provided in the standard library.

The OCaml system release 4.02: Documentation and user's manual

OpenAIRE

Leroy, Xavier; Doligez, Damien; Frisch, Alain; Garrigue, Jacques; Rémy, Didier; Vouillon, Jérôme

2014-01-01

This manual documents the release 4.02 of the OCaml system. It is organized as follows. Part I, "An introduction to OCaml", gives an overview of the language. Part II, "The OCaml language", is the reference description of the language. Part III, "The OCaml tools", documents the compilers, toplevel system, and programming utilities. Part IV, "The OCaml library", describes the modules provided in the standard library.

The OCaml system release 4.06: Documentation and user's manual

OpenAIRE

Leroy , Xavier; Doligez , Damien; Frisch , Alain; Garrigue , Jacques; Rémy , Didier; Vouillon , Jérôme

2017-01-01

This manual documents the release 4.06 of the OCaml system. It is organized as follows. Part I, "An introduction to OCaml", gives an overview of the language. Part II, "The OCaml language", is the reference description of the language. Part III, "The OCaml tools", documents the compilers, toplevel system, and programming utilities. Part IV, "The OCaml library", describes the modules provided in the standard library.

Separation of yttrium (III) from lanthanoids (III) by solvent extraction with substituted N-Alkylcarbonyl-N-phenylhydroxylamines

International Nuclear Information System (INIS)

Haraguchi, K.; Ogata, T.; Nakagawa, K.; Saitoh, T.; Kamidate, T.; Watanabe, H.

1996-01-01

A series of substituted N-alkylcarbonyl-N-phenylhydroxylamines(R-PHAs) were synthesized and utilized for the extraction of yttrium(III) and lanthanoids(III) in order to obtain effective extractants for the separation of yttrium(III) from the lanthanoids(III) and the mutual separation of the lanthanoids(III). The distribution ratio of yttrium(III) and the lanthanoids(III) between the carbon tetrachloride and the aqueous phases was measured as functions of the pH and the extractant concentration at 298 K at an ionic strength of 0.1 (NaNO 3 ). Yttrium(III) and the lanthanoids(III) were extracted with R-PHAs(HL) as self-adducted chelates of the form, ML 3 (HL) x , where 'x' is 1, 2 or 3 depending on the extraction system. The extractability of the metal ions decreased in the order of R-PHA having a primary, a secondary and a tertiary alkyl substituent attached to the carbonyl group because of the steric hindrance of the alkyl group. The separation factors for both Yb/Eu and Yb/Y pairs increased with increasing branching of the alkyl group of R-PHA. The excellent selectivity of R-PHAs having a tertiary alkyl group was attributable to a greater inductive effect of the tertiary alkyl group than those of the primary and secondary alkyl groups. The substituents at the phenyl group of R-PHAs gave no significant effect on the selectivity, while the extractability was enhanced considerably by introduction of electron withdrawing substituents at appropriate positions of the phenyl group of R-PHAs. (authors)

BASEL III – A new approach to improve international financial stability

Directory of Open Access Journals (Sweden)

Claudia Gabriela BAICU

2010-09-01

Full Text Available In its first part, the article highlights the factors standing at the basis of the modification of the general framework of development of the banking activity in the last decades and the main trends that manifested on the international banking market until the global financial crisis. Thenceforth, the main lessons learned from the global financial crisis for the regulation and supervision authorities are presented. The final part of the article concerns the Basel Committee answer to the global financial crisis, concretised in a reform programme regarding the regulatory framework of the banking activity. The improvements and news brought by the Basel III reform programme take into account the flaws revealed by the global financial crisis and have the purpose to strengthen the stability of the international financial system.

Vacuum system for the NIJI-III compact storage ring

International Nuclear Information System (INIS)

Miura, F.; Tsutsui, Y.; Takada, H.

1990-01-01

The NIJI-III is a compact storage ring measuring about 15 m in circumference with four superconducting bending magnets. It is under development as a synchrotron light source for X-ray lithography with a stored beam current of 200 mA at a stored beam current of 200 mA at a stored energy level of 615 MeV. The vacuum system is designed to attain a pressure of less than 1 x 10 -9 Torr at beam storage. The compact ring design makes it difficult to install a large number of pumps able to satisfy the required pumping speed. For the purpose of realizing a high pumping speed, a cryopump as a result of cooling the superconducting magnet duct wall to the liquid helium (LHe) temperature is adopted, as a result the total pumping speed to 2.8 x 10 4 l/s is obtained. (author)

The reduction of 4-chloronitrobenzene by Fe(II)-Fe(III) oxide systems - correlations with reduction potential and inhibition by silicate

Energy Technology Data Exchange (ETDEWEB)

Jones, Adele M., E-mail: adele.jones1@unsw.edu.au; Kinsela, Andrew S.; Collins, Richard N.; Waite, T. David, E-mail: d.waite@unsw.edu.au

2016-12-15

Recent studies have demonstrated that the rate at which Fe(II)-Fe(III) oxyhydroxide systems catalyze the reduction of reducible contaminants, such as 4-chloronitrobenzene, is well correlated to their thermodynamic reduction potential. Here we confirm this effect in the presence of Fe(III) oxyhydroxide phases not previously assessed, namely ferrihydrite and nano-goethite, as well as Fe(III) oxyhydroxide phases previously examined. In addition, silicate is found to decrease the extent of Fe(II) sorption to the Fe(III) oxyhydroxide surface, increasing the reduction potential of the Fe(II)-Fe(III) oxyhydroxide suspension and, accordingly, decreasing the rate of 4-chloronitrobenzene reduction. A linear relationship between the reduction potential of the Fe(II)-Fe(III) oxyhydroxide suspensions and the reduction rate of 4-chloronitrobenzene (normalized to surface area and concentration of sorbed Fe(II)) was obtained in the presence and absence of silicate. However, when ferrihydrite was doped with Si (through co-precipitation) the reduction of 4-chloronitrobenzene was much slower than predicted from its reduction potential. The results obtained have significant implications to the likely effectiveness of naturally occurring contaminant degradation processes involving Fe(II) and Fe(III) oxyhydroxides in groundwater environments containing high concentrations of silicate, or other species which compete with Fe(II) for sorption sites.

Modern diagnostic systems for loose parts, vibration and leakage monitoring

International Nuclear Information System (INIS)

Kunze, U.

1997-01-01

The modern diagnostic systems for loose parts, vibration and leakage monitoring of Siemens marked improvements in signal detection, ease of operation, and the display of information. The paper gives an overview on: Loose parts monitoring system KUeS '95 - a computer-based system. The knowledge and experience about loose parts detection incorporated into this system can be characterized as ''intelligence''. Vibration monitoring system SUeS '95 - a fully automated system for early detection of changes in the vibration patterns of the reactor coolant system components and reactor pressure vessel internals. Leak detection system FLUeS - a system that detects even small leaks in steam-carrying components and very accurately determines their location. Leaks are detected on the moisture distribution in a sample air column into which the escaping steam locally diffuses. All systems described represent the latest state of technology. Nevertheless a considerable amount of operational experience can be reported. (author). 5 refs, 10 figs

Ferrous-activated persulfate oxidation of arsenic(III) and diuron in aquatic system

Energy Technology Data Exchange (ETDEWEB)

Zhou, Lei [State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023 (China); Zheng, Wei [Jiangsu Product Quality Supervision and Inspection Research Institute, Nanjing 210007 (China); Ji, Yuefei [State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023 (China); Université Lyon 1, UMR CNRS 5256, Institut de recherches sur la catalyse et l’environnement de Lyon (IRCELYON), 2 Avenue Albert Einstein, F-69626 Villeurbanne (France); Zhang, Jinfeng; Zeng, Chao; Zhang, Ya; Wang, Qi [State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023 (China); Yang, Xi, E-mail: yangxi@nju.edu.cn [State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023 (China)

2013-12-15

Highlights: • Effective oxidation of As(III)/diuron is achieved by Fe(II)-activated persulfate. • Hydroxyl and sulfate radical play important roles in As(III) and diuron oxidation. • CA and Na{sub 2}S{sub 2}O{sub 3} are efficient and environmental friendly chelating agents. • DFT calculation is found to be useful for degradation products prediction. -- Abstract: In situ chemical oxidation (ISCO) can be an effective technology for the remediation of soil and groundwater polluted by organic and inorganic contaminants. This study investigated the oxidation of arsenic(III) (As(III)) and diuron using ferrous activated persulfate-based ISCO. The results indicated that Fe(II)/persulfate oxidation could be an effective method to oxidize As(III) and diuron. Effects of pH, S{sub 2}O{sub 8}{sup 2−} and Fe(II) amounts on the destruction of As(III) and diuron were examined in batch experiments. Acidic conditions favored the removal of As(III) and diuron. Four chelating agents, citric acid (CA), Na{sub 2}S{sub 2}O{sub 3}, diethylene triamine pentaacetic acid (DTPA) and ethylene diamine tetraacetic acid disodium (EDTA-Na{sub 2}) were used in attempt to maintain the quantity of ferrous ion in solution. In our experiments, CA and Na{sub 2}S{sub 2}O{sub 3} were found to be more effective than DTPA and EDTA-Na{sub 2}. Our results also revealed a widely practical prospect of inorganic chelating agent Na{sub 2}S{sub 2}O{sub 3}. Hydroxyl and sulfate radical were determined to play key roles in the oxidation process by using ethanol and tertiary butanol as molecular probes. Oxidation of As(III) yielded As(V) via the electron-transfer reaction. In the oxidation process of diuron, a stepwise nucleophilic substitution of chlorine by hydroxyl and a stepwise oxidation process of the methyl on the dimethylurea group by hydroxyl and sulfate radical were proposed.

Possible effects of basel III accord on Turkish banking system

OpenAIRE

Çölgezen, Petek

2013-01-01

138 pages Bu tez Basel Komitesinin Basel I ve Basel II uzlaşılarında görülen eksiklikleri gidermek için Basel III Uzlaşısı adı altında getirdiği yeni düzenlemelere, uygulanmış olan uzlaşıların Türkiye ve bütün dünyada yarattığı pozitif ve negatif etkilere ve henüz uygulanmamış olan Basel III Uzlaşısının olası etkilerine değinmek amacıyla hazırlanmıştır. Bu amaçla akademik araştırma yapılarak Basel I, Basel II, Basel 2.5 ve Basel III uzlaşılarının temel kuralları ve hedefleri ayrıntılı b...

Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 3. Safety assessment for geological disposal systems

International Nuclear Information System (INIS)

1999-11-01

Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, the part 3 of the progress report, concerns safety assessment for geological disposal systems definitely introduced in part 1 and 2 of this series and consists of 9 chapters. Chapter I concerns the methodology for safety assessment while Chapter II deals with diversity and uncertainty about the scenario, the adequate model and the required data of the systems above. Chapter III summarizes the components of the geological disposal system. Chapter IV refers to the relationship between radioactive wastes and human life through groundwater, i.e. nuclide migration. In Chapter V is made a reference case which characterizes the geological environmental data using artificial barrier specifications. (Ohno. S.)

Effect of Population III Multiplicity on Dark Star Formation

Science.gov (United States)

Stacy, Athena; Pawlik, Andreas H.; Bromm, Volker; Loeb, Abraham

2012-01-01

We numerically study the mutual interaction between dark matter (DM) and Population III (Pop III) stellar systems in order to explore the possibility of Pop III dark stars within this physical scenario. We perform a cosmological simulation, initialized at z approx. 100, which follows the evolution of gas and DM. We analyze the formation of the first mini halo at z approx. 20 and the subsequent collapse of the gas to densities of 10(exp 12)/cu cm. We then use this simulation to initialize a set of smaller-scale 'cut-out' simulations in which we further refine the DM to have spatial resolution similar to that of the gas. We test multiple DM density profiles, and we employ the sink particle method to represent the accreting star-forming region. We find that, for a range of DM configurations, the motion of the Pop III star-disk system serves to separate the positions of the protostars with respect to the DM density peak, such that there is insufficient DM to influence the formation and evolution of the protostars for more than approx. 5000 years. In addition, the star-disk system causes gravitational scattering of the central DM to lower densities, further decreasing the influence of DM over time. Any DM-powered phase of Pop III stars will thus be very short-lived for the typical multiple system, and DM will not serve to significantly prolong the life of Pop III stars.

Unraveling the Mystery of the Blue Fog: Structure, Properties, and Applications of Amorphous Blue Phase III.

Science.gov (United States)

Gandhi, Sahil Sandesh; Chien, Liang-Chy

2017-12-01

The amorphous blue phase III of cholesteric liquid crystals, also known as the "blue fog," are among the rising stars in materials science that can potentially be used to develop next-generation displays with the ability to compete toe-to-toe with disruptive technologies like organic light-emitting diodes. The structure and properties of the practically unobservable blue phase III have eluded scientists for more than a century since it was discovered. This progress report reviews the developments in this field from both fundamental and applied research perspectives. The first part of this progress report gives an overview of the 130-years-long scientific tour-de-force that very recently resulted in the revelation of the mysterious structure of blue phase III. The second part reviews progress made in the past decade in developing electrooptical, optical, and photonic devices based on blue phase III. The strong and weak aspects of the development of these devices are underlined and criticized, respectively. The third- and-final part proposes ideas for further improvement in blue phase III technology to make it feasible for commercialization and widespread use. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Doublet III beamline: as-built

International Nuclear Information System (INIS)

Harder, C.R.; Holland, M.M.; Parker, J.W.; Gunn, J.; Resnick, L.

1980-03-01

In order to fully exploit Doublet III capabilities and to study new plasma physics regimes, a Neutral Beam Injector System has been constructed. Initially, a two beamline system will supply 7 MW of heat to the plasma. The system is currently being expanded to inject approx. 20 MW of power (6 beamlines). Each beamline is equipped with two Lawrence Berkeley Laboratory type rectangular ion sources with 10 cm x 40 cm extraction grids. These sources will accelerate hydrogen ions to 80 keV, with extracted beam currents in excess of 80 A per source expected. The first completed source is currently being tested and conditioned on the High Voltage Test Stand at Lawrence Livermore Laboratory. This paper pictorially reviews the as-built Doublet III neutral beamline with emphasis on component relation and configuration relative to spatial and source imposed design constraints

A survey of Type III restriction-modification systems reveals numerous, novel epigenetic regulators controlling phase-variable regulons; phasevarions

Science.gov (United States)

Atack, John M; Yang, Yuedong; Jennings, Michael P

2018-01-01

Abstract Many bacteria utilize simple DNA sequence repeats as a mechanism to randomly switch genes on and off. This process is called phase variation. Several phase-variable N6-adenine DNA-methyltransferases from Type III restriction-modification systems have been reported in bacterial pathogens. Random switching of DNA methyltransferases changes the global DNA methylation pattern, leading to changes in gene expression. These epigenetic regulatory systems are called phasevarions — phase-variable regulons. The extent of these phase-variable genes in the bacterial kingdom is unknown. Here, we interrogated a database of restriction-modification systems, REBASE, by searching for all simple DNA sequence repeats in mod genes that encode Type III N6-adenine DNA-methyltransferases. We report that 17.4% of Type III mod genes (662/3805) contain simple sequence repeats. Of these, only one-fifth have been previously identified. The newly discovered examples are widely distributed and include many examples in opportunistic pathogens as well as in environmental species. In many cases, multiple phasevarions exist in one genome, with examples of up to 4 independent phasevarions in some species. We found several new types of phase-variable mod genes, including the first example of a phase-variable methyltransferase in pathogenic Escherichia coli. Phasevarions are a common epigenetic regulation contingency strategy used by both pathogenic and non-pathogenic bacteria. PMID:29554328

Thermodecomposition of lanthanides (III) and ytrium (III) glucoheptonates

International Nuclear Information System (INIS)

Giolito, J.

1987-01-01

The lanthanides (III) and yttrium (III) glucoheptonates as well the D-glucoheptono 1-4 lactone were studied using common analytical methods, elemental microanalysis of carbon and hydrogen, thermogravimetry and differential scanning calorimetry. These compounds were prepared from the reaction between the lanthanides (III) and yttrium (III) hydroxides and glucoheptonic acid aqueous solution obtained by means of the delta lactone hydrolysis of this acid. After stoichiometric reaction the compounds were precipitated by the addition of absolute ethanol, washed with the same solvent and dried in desiccator. Thermogravimetric the (TG) curves of the lanthanides glucoheptonates of the ceric group present thermal profiles with enough differences permitting an easy caracterization of each compound and the yttrium (III) glucoheptonate TG curve showed a great similarity with the erbium (III) compound TG curve. The differential scanning calometry (DSC) curves showed endothermic and exothermic peaks by their shape, height and position (temperature) permit an easy and rapid identification of each compound specially if DSC and TG curves were examined simultaneously. (author) [pt

The Moessbauer effect in Fe(III) HEDTA, Fe(III) EDTA, and Fe(III) CDTA compounds

International Nuclear Information System (INIS)

Prado, F.R.

1989-01-01

The dependence of Moessbauer spectra with pH value of Fe(III)HEDTA and Fe(III)CDTA compounds is studied. Informations on formation processes of LFe-O-FeL (L=ligand) type dimers by the relation of titration curves of Fe(III)EDTA, Fe(III)HEDTA and Fe(III)CDTA compounds with the series of Moessbauer spectra, are obtained. Some informations on Fe-O-Fe bond structure are also obtained. Comparing the titration curves with the series of Moessbauer spectra, it is concluded that the dimerization process begins when a specie of the form FeXOH α (X = EDTA, HEDTA, CDTA; α = -1, -2) arises. (M.C.K.) [pt

Benchmarking the performance of fixed-image receptor digital radiography systems. Part 2: system performance metric.

Science.gov (United States)

Lee, Kam L; Bernardo, Michael; Ireland, Timothy A

2016-06-01

This is part two of a two-part study in benchmarking system performance of fixed digital radiographic systems. The study compares the system performance of seven fixed digital radiography systems based on quantitative metrics like modulation transfer function (sMTF), normalised noise power spectrum (sNNPS), detective quantum efficiency (sDQE) and entrance surface air kerma (ESAK). It was found that the most efficient image receptors (greatest sDQE) were not necessarily operating at the lowest ESAK. In part one of this study, sMTF is shown to depend on system configuration while sNNPS is shown to be relatively consistent across systems. Systems are ranked on their signal-to-noise ratio efficiency (sDQE) and their ESAK. Systems using the same equipment configuration do not necessarily have the same system performance. This implies radiographic practice at the site will have an impact on the overall system performance. In general, systems are more dose efficient at low dose settings.

Adsorption Behaviour of La(III and Eu(III Ions from Aqueous Solutions by Hydroxyapatite: Kinetic, Isotherm, and Thermodynamic Studies

Directory of Open Access Journals (Sweden)

F. Granados-Correa

2013-01-01

Full Text Available The hydroxyapatite was successfully synthesized, characterized, and used as an alternative low-cost adsorbent material to study the adsorption behavior of La(III and Eu(III ions from nitrate aqueous solutions as a function of contact time, initial metal ion concentration, pH, and temperature by using a bath technique. The kinetic data correspond very well to the pseudo-second-order equation, and in both cases the uptake was affected by intraparticle diffusion. Isotherm adsorption data were well fitted by the Freundlich model equation with 1/n>1, indicating a multilayer and cooperative-type adsorption. Thermodynamic parameters for the adsorption systems were determinated at 293, 303, 313, and 323 K. These parameters show that adsorptions of La(III and Eu(III ions on hydroxyapatite are endothermic and spontaneous processes. The adsorption was found to follow the order Eu(III > La(III and is dependent on ion concentration, pH, and temperature.

Doppler Lidar System Design via Interdisciplinary Design Concept at NASA Langley Research Center - Part III

Science.gov (United States)

Barnes, Bruce W.; Sessions, Alaric M.; Beyon, Jeffrey; Petway, Larry B.

2014-01-01

Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. The existing power system was analyzed to rank components in terms of inefficiency, power dissipation, footprint and mass. Design considerations and priorities are compared along with the results of each design iteration. Overall power system improvements are summarized for design implementations.

The coordination number of Lu(III) in a mixed system of methanol and water

International Nuclear Information System (INIS)

Arisaka, M.; Takuwa, N.; Suganuma, H.

2000-01-01

The stability constants (β 1(F) ) of the monofluoro complex of Lu(III) and those (β 1(Cl) ) of the monochloride solvent-shared ion-pair of Lu(III) have been determined in mixed solvents of methanol and water at 0.10 and 1.00 mol x dm -3 ionic strengths, respectively. The variation in lnβ 1(F) with an increase in the mole fraction of methanol (X s ) in the mixed solvent system showed an acute-angled convex inflection point at X s ∼ 0.12, an acute-angled concave inflection point at X s ∼ 0.22, and another acute-angled convex inflection point at X s ∼ 0.27. It was concluded that the first and the second convex inflection points denoted the CN of Lu 3+ from CN = 8 to a mixture of CN = 8 and 7 and from CN = 8 and 7 to a mixture containing CN = 6, respectively. The concave point is the starting point of a change in the CN of Lu(III) in LuF 2+ from CN = 8 to a mixture of CN = 8 and 7. The values at two inflection points of the CN around Lu 3+ are consistent with the inflection points of the variation in the values of lnβ 1(Cl ) versus the dielectric constant of the mixed solvent. (author)

The role of Ce(III) in BZ oscillating reactions

Science.gov (United States)

Nogueira, Paulo A.; Varela, Hamilton; Faria, Roberto B.

2012-03-01

Herein we present results on the oscillatory dynamics in the bromate-oxalic acid-acetone-Ce(III)/Ce(IV) system in batch and also in a CSTR. We show that Ce(III) is the necessary reactant to allow the emergence of oscillations. In batch, oscillations occur with Ce(III) and also with Ce(IV), but no induction period is observed with Ce(III). In a CSTR, no oscillations were found using a freshly prepared Ce(IV), but only when the cerium-containing solution was aged, allowing partial conversion of Ce(IV) to Ce(III) by reaction with acetone.

The regulatory framework of trade finance: from BASEL I to BASEL III

Directory of Open Access Journals (Sweden)

Claudia BAICU

2011-09-01

Full Text Available The global crisis revealed several weaknesses in the international framework of banking regulation. Consequently, the Basel Committee on Banking Supervision (BCBS proposed a package of measures to strengthen the resilience of the banking sector. Besides the positive effects they have on financial stability, the new regulatory provisions affect the ability of banks to provide trade finance. Therefore, the banking industry considers that regulators have not taken into account the low-risk profile of activity. Starting from this premise, the paper consists of three parts. In the first part, the role and objectives of the BCBS are presented; the second part is designed to review the most important trade instruments and to underline the tendencies in trade finance; finally, the last part highlights the regulation of trade finance under the Basel I, Basel II and Basel III regimes, and some unintended consequences of the Basel III framework.

The development of component-based information systems

CERN Document Server

Cesare, Sergio de; Macredie, Robert

2015-01-01

This work provides a comprehensive overview of research and practical issues relating to component-based development information systems (CBIS). Spanning the organizational, developmental, and technical aspects of the subject, the original research included here provides fresh insights into successful CBIS technology and application. Part I covers component-based development methodologies and system architectures. Part II analyzes different aspects of managing component-based development. Part III investigates component-based development versus commercial off-the-shelf products (COTS), includi

Ferrous-activated persulfate oxidation of arsenic(III) and diuron in aquatic system.

Science.gov (United States)

Zhou, Lei; Zheng, Wei; Ji, Yuefei; Zhang, Jinfeng; Zeng, Chao; Zhang, Ya; Wang, Qi; Yang, Xi

2013-12-15

In situ chemical oxidation (ISCO) can be an effective technology for the remediation of soil and groundwater polluted by organic and inorganic contaminants. This study investigated the oxidation of arsenic(III) (As(III)) and diuron using ferrous activated persulfate-based ISCO. The results indicated that Fe(II)/persulfate oxidation could be an effective method to oxidize As(III) and diuron. Effects of pH, S2O8(2-) and Fe(II) amounts on the destruction of As(III) and diuron were examined in batch experiments. Acidic conditions favored the removal of As(III) and diuron. Four chelating agents, citric acid (CA), Na2S2O3, diethylene triamine pentaacetic acid (DTPA) and ethylene diamine tetraacetic acid disodium (EDTA-Na2) were used in attempt to maintain the quantity of ferrous ion in solution. In our experiments, CA and Na2S2O3 were found to be more effective than DTPA and EDTA-Na2. Our results also revealed a widely practical prospect of inorganic chelating agent Na2S2O3. Hydroxyl and sulfate radical were determined to play key roles in the oxidation process by using ethanol and tertiary butanol as molecular probes. Oxidation of As(III) yielded As(V) via the electron-transfer reaction. In the oxidation process of diuron, a stepwise nucleophilic substitution of chlorine by hydroxyl and a stepwise oxidation process of the methyl on the dimethylurea group by hydroxyl and sulfate radical were proposed. Copyright © 2013 Elsevier B.V. All rights reserved.

Sorption of trace amounts of gallium (III) on iron (III) oxide

International Nuclear Information System (INIS)

Music, S.; Gessner, M.; Wolf, R.H.H.

1979-01-01

The sorption of trace amounts of gallium(III) on iron(III) oxide has been studied as a function of pH. Optimum conditions have been found for the preconcentration of traces of gallium(III) by iron(III) oxide. The influence of surface active substances and of complexing agents on the sorption of trace amounts of gallium(III) on iron(III) oxide has been also studied. (orig.) [de

Sorption of trace amounts of gallium (III) on iron (III) oxide

Energy Technology Data Exchange (ETDEWEB)

Music, S; Gessner, M; Wolf, R H.H. [Institut Rudjer Boskovic, Zagreb (Yugoslavia)

1979-01-01

The sorption of trace amounts of gallium(III) on iron(III) oxide has been studied as a function of pH. Optimum conditions have been found for the preconcentration of traces of gallium(III) by iron(III) oxide. The influence of surface active substances and of complexing agents on the sorption of trace amounts of gallium(III) on iron(III) oxide has been also studied.

Reactivity of Chromium(III) Nutritional Supplements in Biological Media: An X-Ray Absorption Spectroscopic Study

Energy Technology Data Exchange (ETDEWEB)

Nguyen, A.; Mulyani, I.; Levina, A.; Lay, P.A.

2009-05-22

Chromium(III) nutritional supplements are widely used due to their purported ability to enhance glucose metabolism, despite growing evidence on low activity and the potential genotoxicity of these compounds. Reactivities of Cr(III) complexes used in nutritional formulations, including [Cr3O(OCOEt)6(OH2)3]+ (A), [Cr(pic)3] (pic) = 2-pyridinecarboxylato(-) (B), and trans-[CrCl2(OH2)4]+ (CrCl3 {center_dot} 6H2O; C), in a range of natural and simulated biological media (artificial digestion systems, blood and its components, cell culture media, and intact L6 rat skeletal muscle cells) were studied by X-ray absorption near-edge structure (XANES) spectroscopy. The XANES spectroscopic data were processed by multiple linear-regression analyses with the use of a library of model Cr(III) compounds, and the results were corroborated by the results of X-ray absorption fine structure spectroscopy and electrospray mass spectrometry. Complexes A and B underwent extensive ligand-exchange reactions under conditions of combined gastric and intestinal digestion (in the presence of a semisynthetic meal, 3 h at 310 K), as well as in blood serum and in a cell culture medium (1-24 h at 310 K), with the formation of Cr(III) complexes with hydroxo and amino acid/protein ligands. Reactions of compounds A-C with cultured muscle cells led to similar ligand-exchange products, with at least part of Cr(III) bound to the surface of the cells. The reactions of B with serum greatly enhanced its propensity to be converted to Cr(VI) by biological oxidants (H2O2 or glucose oxidase system), which is proposed to be a major cause of both the insulin-enhancing activity and toxicity of Cr(III) compounds (Mulyani, I.; Levina, A.; Lay, P. A. Angew. Chem. Int. Ed. 2004, 43, 4504-4507). This finding enhances the current concern over the safety of consumption of large doses of Cr(III) supplements, particularly [Cr(pic)3].

Some Considerations Regarding the Implementation of Basel III

Directory of Open Access Journals (Sweden)

Mihai Dorel Vlad

2016-09-01

Full Text Available Basel III represents a basic revision of the banking industry regulatory and supervisory framework for the future, the objective being the stability consolidation of the financial system. The objective of this article is to analyze the impact of the Basel III implementation upon the banking system at the European level, and respectively, upon the banking system of Romania. Basel III standards have been elaborated as a response of the 2008 financial crisis and are considered as vital for the assurance of financial institution capitalization against future financial shocks. The new standards have as an object the improvement of risk management, increased requirements of transparency and publication of credit institutions, as well as solving the banks problems of systemical importance. The measures that the credit institutions could adopt in order to mitigate the impact of alignment to the new standards are adjusting the business model and restructuring bank balance sheets.

TBT: Telecommunications-Based Training in the 90s (DELTA Programme--Action Line III). Proceedings of the Workshop (Madrid, Spain, January 21-22, 1991).

Science.gov (United States)

Commission of the European Communities, Brussels (Belgium).

This report contains a collection of papers presented at a workshop on telecommunications-based training systems as part of the DELTA (Developing European Learning through Technological Advance) Action Line III, which addressed research in telecommunications for open and distance education. The following presentations are included: (1)…

Binary and ternary chelates of scandium (III), Yttrium (III) and lanthanum (III) with ethyleneglycol-bis(. beta. -aminoethylether)-tetraacetic acid as primary and substituted salicylic acids as secondary ligands

Energy Technology Data Exchange (ETDEWEB)

Pandey, A K; Chandra, M; Agarwala, B V; Dey, A K [Allahabad Univ. (India). Chemical Labs.

1980-01-01

Formation constants of binary and ternary complexes of the systems of the type: M-L and M-egta-L (M = scandium(III), yttrium(III) and lanthanum(III), egta = ethylene glycol-bis(..beta..-aminoethylether)-tetra acetic acid, L = o-cresotic acid (o-ca), m-cresotic acid (m-ca), 5-chlorosalicyclic acid(csa), and 3,5-dibromosalicylic acid (dbsa)) have been determined pH-metrically at 25deg and ..mu.. = 0.1M (KNO/sub 3/) in 50% (v/v) aqueous-ethanol medium. The order of stabilities of ternary complexes has been compared with those of corresponding binary complexes, and results discussed on the basis of coulombic interactions.

Improved Management of Part Safety Classification System for Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Young; Park, Youn Won; Park, Heung Gyu; Park, Hyo Chan [BEES Inc., Daejeon (Korea, Republic of)

2016-10-15

As, in recent years, many quality assurance (QA) related incidents, such as falsely-certified parts and forged documentation, etc., were reported in association with the supply of structures, systems, components and parts to nuclear power plants, a need for a better management of safety classification system was addressed so that it would be based more on the level of parts . Presently, the Korean nuclear power plants do not develop and apply relevant procedures for safety classifications, but rather the safety classes of parts are determined solely based on the experience of equipment designers. So proposed in this paper is a better management plan for safety equipment classification system with an aim to strengthen the quality management for parts. The plan was developed through the analysis of newly introduced technical criteria to be applied to parts of nuclear power plant.

WISC-III e WAIS-III na avaliação da inteligência de cegos WISC-III/WAIS-III en ciegos WISC-III and WAIS-III in intellectual assessment of blind people

Directory of Open Access Journals (Sweden)

Elizabeth do Nascimento

2007-12-01

Full Text Available Diante da escassez de pesquisas nacionais e de testes psicológicos destinados a avaliar pessoas cegas, desenvolveu-se um estudo psicométrico com as escalas verbais dos testes WISC-III e WAIS-III. Após as adaptações de alguns estímulos e das instruções, os testes foram aplicados em crianças (N = 120 e adultos (N = 52 residentes em Belo Horizonte. Os resultados indicaram que as escalas verbais modificadas apresentam uma boa consistência interna (alfa> 0,80. Além disso, a investigação da validade fatorial identifica a presença clara de apenas um componente. Este componente explica 81% e 64% para o WISC-III e WAIS-III, respectivamente. Conclui-se que as adaptações a que se procedeu não afetaram a estrutura fatorial das escalas. Deste modo, os profissionais poderão utilizar as escalas modificadas para avaliar a inteligência de pessoas cegas.Frente a la escasez de investigaciones nacionales asi como la ausencia de tests psicológicos que evaluen personas ciegas, se ha desarrollado un estudio psicometrico com la escalas verbales del WISC-III y WAIS-III. Posteriormente a las adaptaciones de algunos estímulos y de las instrucciones, las escalas fueron aplicadas a una muestra de niños (n=120 y de adultos (n=52 residentes en la ciudad de Belo Horizonte-Brasil. Los resultados indican que las escalas verbales modificadas presentan una alta fiabilidad (alpha >0,80 asi como la presencia clara de un unico componente responsable por 81% y 64% de la variancia del WIC-III e WAIS-III respectivamente. Se ha concluido que las modificaciones efectuadas no han comprometido la estructura factorial de las escalas verbales. Por tanto, los profesionales psicólogos pueden utilizar las escalas modificadas para la evaluación de la inteligencia de personas portadoras de ceguera.Owing to the almost lack of a national research on psychological testing for the evaluation of blind people, a psychometric study has been developed with the WISC-III and WAIS-III

76 FR 29083 - Agriculture Priorities and Allocations System

Science.gov (United States)

2011-05-19

... Vol. 76 Thursday, No. 97 May 19, 2011 Part III Department of Agriculture Farm Service Agency 7 CFR Part 789 Agriculture Priorities and Allocations System; Proposed Rule #0;#0;Federal Register / Vol. 76 , No. 97 / Thursday, May 19, 2011 / Proposed Rules#0;#0; [[Page 29084

Hijacking of the pleiotropic cytokine interferon-γ by the type III secretion system of Yersinia pestis.

Directory of Open Access Journals (Sweden)

Claire Gendrin

Full Text Available Yersinia pestis, the causative agent of bubonic plague, employs its type III secretion system to inject toxins into target cells, a crucial step in infection establishment. LcrV is an essential component of the T3SS of Yersinia spp, and is able to associate at the tip of the secretion needle and take part in the translocation of anti-host effector proteins into the eukaryotic cell cytoplasm. Upon cell contact, LcrV is also released into the surrounding medium where it has been shown to block the normal inflammatory response, although details of this mechanism have remained elusive. In this work, we reveal a key aspect of the immunomodulatory function of LcrV by showing that it interacts directly and with nanomolar affinity with the inflammatory cytokine IFNγ. In addition, we generate specific IFNγ mutants that show decreased interaction capabilities towards LcrV, enabling us to map the interaction region to two basic C-terminal clusters of IFNγ. Lastly, we show that the LcrV-IFNγ interaction can be disrupted by a number of inhibitors, some of which display nanomolar affinity. This study thus not only identifies novel potential inhibitors that could be developed for the control of Yersinia-induced infection, but also highlights the diversity of the strategies used by Y. pestis to evade the immune system, with the hijacking of pleiotropic cytokines being a long-range mechanism that potentially plays a key role in the severity of plague.

Human Retroviruses and AIDS. A compilation and analysis of nucleic acid and amino acid sequences: I--II; III--V

Energy Technology Data Exchange (ETDEWEB)

Myers, G.; Korber, B. [eds.] [Los Alamos National Lab., NM (United States); Wain-Hobson, S. [ed.] [Laboratory of Molecular Retrovirology, Pasteur Inst.; Smith, R.F. [ed.] [Baylor Coll. of Medicine, Houston, TX (United States). Dept. of Pharmacology; Pavlakis, G.N. [ed.] [National Cancer Inst., Frederick, MD (United States). Cancer Research Facility

1993-12-31

This compendium and the accompanying floppy diskettes are the result of an effort to compile and rapidly publish all relevant molecular data concerning the human immunodeficiency viruses (HIV) and related retroviruses. The scope of the compendium and database is best summarized by the five parts that it comprises: (I) HIV and SIV Nucleotide Sequences; (II) Amino Acid Sequences; (III) Analyses; (IV) Related Sequences; and (V) Database Communications. Information within all the parts is updated at least twice in each year, which accounts for the modes of binding and pagination in the compendium.

Uranium (III) precipitation in molten chloride by wet argon sparging

Energy Technology Data Exchange (ETDEWEB)

Vigier, Jean-François, E-mail: jean-francois.vigier@ec.europa.eu [CEA, Nuclear Energy Division, Radiochemistry & Processes Department, F-30207 Bagnols sur Cèze (France); Unité de Catalyse et de Chimie du Solide, UCCS UMR CNRS 8181, Univ. Lille Nord de France, ENSCL-USTL, B.P. 90108, 59652 Villeneuve d' Ascq Cedex (France); Laplace, Annabelle [CEA, Nuclear Energy Division, Radiochemistry & Processes Department, F-30207 Bagnols sur Cèze (France); Renard, Catherine [Unité de Catalyse et de Chimie du Solide, UCCS UMR CNRS 8181, Univ. Lille Nord de France, ENSCL-USTL, B.P. 90108, 59652 Villeneuve d' Ascq Cedex (France); Miguirditchian, Manuel [CEA, Nuclear Energy Division, Radiochemistry & Processes Department, F-30207 Bagnols sur Cèze (France); Abraham, Francis [Unité de Catalyse et de Chimie du Solide, UCCS UMR CNRS 8181, Univ. Lille Nord de France, ENSCL-USTL, B.P. 90108, 59652 Villeneuve d' Ascq Cedex (France)

2016-06-15

In the context of pyrochemical processes for nuclear fuel treatment, the precipitation of uranium (III) in molten salt LiCl-CaCl{sub 2} (30–70 mol%) at 705 °C is studied. First, this molten chloride is characterized with the determination of the water dissociation constant. With a value of 10{sup −4.0}, the salt has oxoacid properties. Then, the uranium (III) precipitation using wet argon sparging is studied. The salt is prepared using UCl{sub 3} precursor. At the end of the precipitation, the salt is totally free of solubilized uranium. The main part is converted into UO{sub 2} powder but some uranium is lost during the process due to the volatility of uranium chloride. The main impurity of the resulting powder is calcium. The consequences of oxidative and reductive conditions on precipitation are studied. Finally, coprecipitation of uranium (III) and neodymium (III) is studied, showing a higher sensitivity of uranium (III) than neodymium (III) to precipitation. - Highlights: • Precipitation of Uranium (III) is quantitative in molten salt LiCl-CaCl{sub 2} (30–70 mol%). • The salt is oxoacid with a water dissociation constant of 10{sup −4.0} at 705 °C. • Volatility of uranium chloride is strongly reduced in reductive conditions. • Coprecipitation of U(III) and Nd(III) leads to a consecutive precipitation of the two elements.

Connective tissue-activating peptide III (CTAP-III): cloning the synthetic gene and characterization of the protein expressed in E. coli

International Nuclear Information System (INIS)

Johnson, P.H.; Castor, C.W.; Walz, D.A.

1986-01-01

CTAP-III, an α-granule protein secreted by human platelets, is known to stimulate mitogenesis, extracellular matrix synthesis, and plasminogen activator synthesis in human fibroblast cultures. From its primary sequence, a synthetic gene was constructed to code for a methionine-free derivative (Leu substituted for Met-21), then cloned and expressed in E. coli using a new expression vector containing regulatory elements of the colicin E1 operon. Partially purified recombinant CTAP-III showed a line of identity with CTAP-III by immunodiffusion against rabbit antibody to platelet-derived CTAP-III. Immunodetection of the reduced protein after SDS-PAGE electrophoresis showed a molecular weight (mobility) in agreement with the natural form. Biologic activity of rCTAP-III eluted from an antiCTAP-III immunoaffinity column was measured in human synovial cell bioassay systems. rCTAP-III stimulated synovial cell synthesis of 14 C-hyaluronic acid approximately 13-fold; significant (P < 0.001) mitogenesis was also observed. These studies indicate that a sufficient quantity of bioactive peptide can be obtained for a more comprehensive study of its biologic properties

Th(As(III)4As(V)4O18): a mixed-valent oxoarsenic(III)/arsenic(V) actinide compound obtained under extreme conditions.

Science.gov (United States)

Yu, Na; Klepov, Vladislav V; Kegler, Philip; Bosbach, Dirk; Albrecht-Schmitt, Thomas E; Alekseev, Evgeny V

2014-08-18

A high-temperature/high-pressure method was employed to investigate phase formation in the Th(NO3)4·5H2O-As2O3-CsNO3 system. It was observed that an excess of arsenic(III) in starting system leads to the formation of Th(As(III)4As(V)4O18), which is representative of a rare class of mixed-valent arsenic(III)/arsenic(V) compounds. This compound was studied with X-ray diffraction, energy-dispersive X-ray, and Raman spectroscopy methods. Crystallographic data show that Th(As(III)4As(V)4O18) is built from (As(III)4As(V)4O18)(4-) layers connected through Th atoms. The arsenic layers are found to be isoreticular to those in previously reported As2O3 and As3O5(OH), and the geometric differences between them are discussed. Bands in the Raman spectrum are assigned with respect to the presence of AsO3 and AsO4 groups.

Feasibility analysis of As(III) removal in a continuous flow fixed bed system by modified calcined bauxite (MCB)

International Nuclear Information System (INIS)

Bhakat, P.B.; Gupta, A.K.; Ayoob, S.

2007-01-01

This study examine the feasibility of As(III) removal from aqueous environment by an adsorbent, modified calcined bauxite (MCB) in a continuous flow fixed bed system. MCB exhibited excellent adsorption capacity of 520.2 mg/L (0.39 mg/g) with an adsorption rate constant 0.7658 L/mg h for an influent As(III) concentration of 1 mg/L. In a 2 cm diameter continuous flow fixed MCB bed, a depth of only 1.765 cm was found necessary to produce effluent As(III) concentration of 0.01 mg/L, from an influent of 1 mg/L at a flow rate of 8 mL/min. Also, bed heights of 10, 20, and 30 cm could treat 427.85, 473.88 and 489.17 bed volumes of water, respectively, to breakthrough. A reduction in adsorption capacity of MCB was observed with increase in flow rates. The theoretical service times evaluated from bed depth service time (BDST) approach for different flow rates and influent As(III) concentrations had shown good correlation with the corresponding experimental values. The theoretical breakthrough curve developed from constantly mixed batch reactor (CMBR) isotherm data also correlated well with experimental breakthrough curve

Extraction and separation studies of Ga(III, In(III and Tl(III using the neutral organophosphorous extractant, Cyanex-923

Directory of Open Access Journals (Sweden)

P. M. DHADKE

2003-07-01

Full Text Available The neutral extractant, Cyanes-923 has been used for the extraction and separation of gallium(III, indium(III and thallium(III from acidic solution. These metal ions were found to be quantitatively extracted with Cyanex-923 in toluene in the pH range 4.5–5.5, 5.0–6.5 and 1.5–3.0, respectively, and from the organic phase they can be stripped with 2.0 mol dm-3 HNO3, 3.0 mol dm-3 HNO3 and 3.0 mol dm-3 HCl, respectively. The effect of pH equilibration period, diluents, diverse ions and stripping agents on the extraction of Ga(III, In(III and Tl(III has been studied. The stroichiometry of the extracted species of these metal ions was determined on the basis of the slope analysis method. The reaction proceed by solvation and the probable extracted species found were [MCl3. 3Cyanex-923] [where M = Ga(III or In(III ] and [HTlCl4. 3Cyanex-923]. Based on these results a sequential procedure for the separation of Ga(III, In(III and Tl(III from each other was developed.

Improved sensitivity for W-band Gd(III)-Gd(III) and nitroxide-nitroxide DEER measurements with shaped pulses

Science.gov (United States)

Bahrenberg, Thorsten; Rosenski, Yael; Carmieli, Raanan; Zibzener, Koby; Qi, Mian; Frydman, Veronica; Godt, Adelheid; Goldfarb, Daniella; Feintuch, Akiva

2017-10-01

Chirp and shaped pulses have been recently shown to be highly advantageous for improving sensitivity in DEER (double electron-electron resonance, also called PELDOR) measurements due to their large excitation bandwidth. The implementation of such pulses for pulse EPR has become feasible due to the availability of arbitrary waveform generators (AWG) with high sampling rates to support pulse shaping for pulses with tens of nanoseconds duration. Here we present a setup for obtaining chirp pulses on our home-built W-band (95 GHz) spectrometer and demonstrate its performance on Gd(III)-Gd(III) and nitroxide-nitroxide DEER measurements. We carried out an extensive optimization procedure on two model systems, Gd(III)-PyMTA-spacer-Gd(III)-PyMTA (Gd-PyMTA ruler; zero-field splitting parameter (ZFS) D ∼ 1150 MHz) as well as nitroxide-spacer-nitroxide (nitroxide ruler) to evaluate the applicability of shaped pulses to Gd(III) complexes and nitroxides, which are two important classes of spin labels used in modern DEER/EPR experiments. We applied our findings to ubiquitin, doubly labeled with Gd-DOTA-monoamide (D ∼ 550 MHz) as a model for a system with a small ZFS. Our experiments were focused on the questions (i) what are the best conditions for positioning of the detection frequency, (ii) which pump pulse parameters (bandwidth, positioning in the spectrum, length) yield the best signal-to-noise ratio (SNR) improvements when compared to classical DEER, and (iii) how do the sample's spectral parameters influence the experiment. For the nitroxide ruler, we report an improvement of up to 1.9 in total SNR, while for the Gd-PyMTA ruler the improvement was 3.1-3.4 and for Gd-DOTA-monoamide labeled ubiquitin it was a factor of 1.8. Whereas for the Gd-PyMTA ruler the two setups pump on maximum and observe on maximum gave about the same improvement, for Gd-DOTA-monoamide a significant difference was found. In general the choice of the best set of parameters depends on the D

Introduction to integrable many-body systems III

International Nuclear Information System (INIS)

Bajnok, Z.; Samaj, L.

2011-01-01

This is the third part of a three-volume introductory course about integrable systems of interacting bodies. The emphasis is put onto the method of Thermodynamic Bethe Ansatz. Two kinds of integrable models are studied. Systems of itinerant electrons, forming a part of Condensed Matter Physics, involve the Hubbard lattice model of electrons with short-ranged one-site interactions (Sect. 20) and the s-d exchange Kondo model (Sect. 21), describing the scattering of conduction electrons on a spin-s impurity. Methods and basic concepts used in Quantum Field Theory are explained on the integrable (1 + 1)-dimensional sine-Gordon model. We start with the classical description of the model in Sect. 22, analyze its finite energy field configurations (soliton, anti-soliton and breathers) and show its classical integrability. The model is quantized by using two schemes: the conformal (Sect. 23) and Lagrangian (Sect. 24) quantizations. The scattering matrix of the sine-Gordon theory is derived at the full quantum level in the bootstrap scheme and is compared to its classical limit in Sect. 25. The parameters of the scattering matrix are related to those of the Lagrangian by calculating the ground-state energy in an applied magnetic field in two ways: Conformal perturbation theory and Thermodynamic Bethe Ansatz (Sect. 26). The relation of the sine-Gordon theory to the XXZ Heisenberg model, which provides a complete solution of the sine-Gordon model in a finite volume, is pointed out in Sect. 27. The obtained results are applied in Sect. 28. to the derivation of the exact thermodynamics for the (symmetric) two-component Coulomb gas; this is the first classical two-dimensional fluid with exactly solvable thermodynamics (Authors)

75 FR 71648 - Federal Motor Vehicle Safety Standards, Child Restraint Systems; Hybrid III 10-Year-Old Child...

Science.gov (United States)

2010-11-24

... No. NHTSA-2010-0158 Regulation Identifier No. (RIN) 2127-AJ44 Federal Motor Vehicle Safety Standards, Child Restraint Systems; Hybrid III 10-Year-Old Child Test Dummy AGENCY: National Highway Traffic Safety... (SNPRM). SUMMARY: This document proposes to amend Federal Motor Vehicle Safety Standard (FMVSS) No. 213...

40 CFR Table 1 to Subpart III of... - HAP ABA Formulation Limitations Matrix for New Sources [see § 63.1297(d)(2)

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 11 2010-07-01 2010-07-01 true HAP ABA Formulation Limitations Matrix for New Sources [see § 63.1297(d)(2)] 1 Table 1 to Subpart III of Part 63 Protection of Environment... Flexible Polyurethane Foam Production Pt. 63, Subpt. III, Table 1 Table 1 to Subpart III of Part 63—HAP ABA...

Performance Evaluation and Parameter Identification on DROID III

Science.gov (United States)

Plumb, Julianna J.

2011-01-01

The DROID III project consisted of two main parts. The former, performance evaluation, focused on the performance characteristics of the aircraft such as lift to drag ratio, thrust required for level flight, and rate of climb. The latter, parameter identification, focused on finding the aerodynamic coefficients for the aircraft using a system that creates a mathematical model to match the flight data of doublet maneuvers and the aircraft s response. Both portions of the project called for flight testing and that data is now available on account of this project. The conclusion of the project is that the performance evaluation data is well-within desired standards but could be improved with a thrust model, and that parameter identification is still in need of more data processing but seems to produce reasonable results thus far.

Potentiometric studies on some ternary complexes of Nd(III), Sm(III), Gd(III) and Ho(III) with cyclohexanediaminetetraacetic acid as primary ligand

International Nuclear Information System (INIS)

Marathe, D.G.; Munshi, K.N.

1983-01-01

The formation constants of the ternary complexes of neodymium(III), samarium(III), gadlonium(III) and holmium(III) with cyclohexanediaminetetraacetic acid (CyDTA) as primary ligand and dihydroxynaphthalene (DHN), dihydroxynaphthalene-6-sulphonic acid (DHNSA) and cateechol-3,5-disulphonic acid (CDSA) as secondary ligands have been investigated by potentiometric titration technique. The secondary ligands have been investigated by potentiometric titration technique. The values of formation constants of 1:1:1 ternary chelates are reported at three different temperatures, and at a fixed ionic strength, μ = 0.1 M (NaClO 4 ). (author)

Hypoactivation of reward motivational system in patients with newly diagnosed hypertension grade I-II.

Science.gov (United States)

Aftanas, L I; Brak, I V; Gilinskaya, O M; Korenek, V V; Pavlov, S V; Reva, N V

2014-08-01

In patients with newly diagnosed untreated grade I-II hypertension, EEG oscillations were recorded under conditions activation of the two basic motivational systems, defensive motivational system and positive reinforcement system, evoked by recall of personally meaningful emotional events. The 64-channel EEG and cardiovascular reactivity (beat-by-beat technology) were simultaneously recorded. At rest, hypertensive patients had significantly reduced platelet serotonin concentrations in comparison with healthy individuals. The patients experiencing emotional activation were characterized by significantly lower intensity of positive emotions associated with more pronounced suppression of EEG activity in the delta (2-4 Hz) and theta (ranges of frequency 4-6 and 6-8 Hz) oscillators in the parieto-occipital cortex (zones P and PO) in both hemispheres of the brain. The findings attest to insufficient function of the brain serotonin system and hypoactivation of the reward/reinforcement system in patients with primary hypertension.

Solvent effects on extraction of aluminum(III), gallium(III), and indium(III), with decanoic acid

International Nuclear Information System (INIS)

Yamada, Hiromichi; Hayashi, Hisao; Fujii, Yukio; Mizuta, Masateru

1986-01-01

Extraction of aluminum(III) and indium(III) with decanoic acid in 1-octanol was carried out at 25 deg C and at an aqueous ionic strength of 0.1 mol dm -3 (NaClO 4 ). Monomeric and tetrameric aluminum(III) decanoates and monomeric indium(III) decanoate are responsible for the extraction. From a comparison of the present results with those obtained from the previous works, the polymerization of the extracted species was found to be more extensive in benzene than in 1-octanol, and the metal decanoates were highly polymerized in the following order in both solvents: Al > Ga > In. (author)

Extracellular secretion of a recombinant therapeutic peptide by Bacillus halodurans utilizing a modified flagellin type III secretion system

CSIR Research Space (South Africa)

Berger, E

2011-08-01

Full Text Available further 3.5-fold increase in the secretion of recombinant peptide fusions. Conclusions: The type III flagellar secretion system of B. halodurans has been shown to successfully secrete a therapeutic peptide as a heterologous flagellin fusion. Improvements...

Recommendation systems in software engineering

CERN Document Server

Robillard, Martin P; Walker, Robert J; Zimmermann, Thomas

2014-01-01

With the growth of public and private data stores and the emergence of off-the-shelf data-mining technology, recommendation systems have emerged that specifically address the unique challenges of navigating and interpreting software engineering data.This book collects, structures and formalizes knowledge on recommendation systems in software engineering. It adopts a pragmatic approach with an explicit focus on system design, implementation, and evaluation. The book is divided into three parts: "Part I - Techniques" introduces basics for building recommenders in software engineering, including techniques for collecting and processing software engineering data, but also for presenting recommendations to users as part of their workflow.?"Part II - Evaluation" summarizes methods and experimental designs for evaluating recommendations in software engineering.?"Part III - Applications" describes needs, issues and solution concepts involved in entire recommendation systems for specific software engineering tasks, fo...

Machine Vision System for Color Sorting Wood Edge-Glued Panel Parts

Science.gov (United States)

Qiang Lu; S. Srikanteswara; W. King; T. Drayer; Richard Conners; D. Earl Kline; Philip A. Araman

1997-01-01

This paper describes an automatic color sorting system for hardwood edge-glued panel parts. The color sorting system simultaneously examines both faces of a panel part and then determines which face has the "better" color given specified color uniformity and priority defined by management. The real-time color sorting system software and hardware are briefly...

Conservative treatment of Angle Class III malocclusion with anterior crossbite

Directory of Open Access Journals (Sweden)

João Hélder Ferreira de Aguiar

2015-08-01

Full Text Available Angle Class III malocclusion is characterized by anteroposterior dental discrepancy which might be associated or not with skeletal changes. Class III molar relationship is associated with vertical or lingually tipped mandibular incisors and a usually concave profile. These characteristics seriously affect facial esthetics and most frequently are the reason why patients seek orthodontic treatment. This case was presented to the committee of the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as part of the requisites to become a BBO Diplomate.

Identification of small-molecule inhibitors of Yersinia pestis Type III secretion system YscN ATPase.

Directory of Open Access Journals (Sweden)

Wieslaw Swietnicki

Full Text Available Yersinia pestis is a gram negative zoonotic pathogen responsible for causing bubonic and pneumonic plague in humans. The pathogen uses a type III secretion system (T3SS to deliver virulence factors directly from bacterium into host mammalian cells. The system contains a single ATPase, YscN, necessary for delivery of virulence factors. In this work, we show that deletion of the catalytic domain of the yscN gene in Y. pestis CO92 attenuated the strain over three million-fold in the Swiss-Webster mouse model of bubonic plague. The result validates the YscN protein as a therapeutic target for plague. The catalytic domain of the YscN protein was made using recombinant methods and its ATPase activity was characterized in vitro. To identify candidate therapeutics, we tested computationally selected small molecules for inhibition of YscN ATPase activity. The best inhibitors had measured IC(50 values below 20 µM in an in vitro ATPase assay and were also found to inhibit the homologous BsaS protein from Burkholderia mallei animal-like T3SS at similar concentrations. Moreover, the compounds fully inhibited YopE secretion by attenuated Y. pestis in a bacterial cell culture and mammalian cells at µM concentrations. The data demonstrate the feasibility of targeting and inhibiting a critical protein transport ATPase of a bacterial virulence system. It is likely the same strategy could be applied to many other common human pathogens using type III secretion system, including enteropathogenic E. coli, Shigella flexneri, Salmonella typhimurium, and Burkholderia mallei/pseudomallei species.

Identification of small-molecule inhibitors of Yersinia pestis Type III secretion system YscN ATPase.

Science.gov (United States)

Swietnicki, Wieslaw; Carmany, Daniel; Retford, Michael; Guelta, Mark; Dorsey, Russell; Bozue, Joel; Lee, Michael S; Olson, Mark A

2011-01-01

Yersinia pestis is a gram negative zoonotic pathogen responsible for causing bubonic and pneumonic plague in humans. The pathogen uses a type III secretion system (T3SS) to deliver virulence factors directly from bacterium into host mammalian cells. The system contains a single ATPase, YscN, necessary for delivery of virulence factors. In this work, we show that deletion of the catalytic domain of the yscN gene in Y. pestis CO92 attenuated the strain over three million-fold in the Swiss-Webster mouse model of bubonic plague. The result validates the YscN protein as a therapeutic target for plague. The catalytic domain of the YscN protein was made using recombinant methods and its ATPase activity was characterized in vitro. To identify candidate therapeutics, we tested computationally selected small molecules for inhibition of YscN ATPase activity. The best inhibitors had measured IC(50) values below 20 µM in an in vitro ATPase assay and were also found to inhibit the homologous BsaS protein from Burkholderia mallei animal-like T3SS at similar concentrations. Moreover, the compounds fully inhibited YopE secretion by attenuated Y. pestis in a bacterial cell culture and mammalian cells at µM concentrations. The data demonstrate the feasibility of targeting and inhibiting a critical protein transport ATPase of a bacterial virulence system. It is likely the same strategy could be applied to many other common human pathogens using type III secretion system, including enteropathogenic E. coli, Shigella flexneri, Salmonella typhimurium, and Burkholderia mallei/pseudomallei species.

Verification of the DUCT-III for calculation of high energy neutron streaming

Energy Technology Data Exchange (ETDEWEB)

Masukawa, Fumihiro; Nakano, Hideo; Nakashima, Hiroshi; Sasamoto, Nobuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Tayama, Ryu-ichi; Handa, Hiroyuki; Hayashi, Katsumi [Hitachi Engineering Co., Ltd., Hitachi, Ibaraki (Japan); Hirayama, Hideo [High Energy Accelerator Research Organization, Tsukuba, Ibaraki (Japan); Shin, Kazuo [Kyoto Univ., Kyoto (Japan)

2003-03-01

A large number of radiation streaming calculations under a variety of conditions are required as a part of shielding design for a high energy proton accelerator facility. Since sophisticated methods are very time consuming, simplified methods are employed in many cases. For accuracy evaluation of a simplified code DUCT-III for high energy neutron streaming calculations, two kinds of benchmark problems based on the experiments were analyzed. Through comparison of the DUCT-III calculations with both the measurements and the sophisticated Monte Carlo calculations, DUCT-III was seen reliable enough for applying to the shielding design for the Intense Proton Accelerator Facility. (author)

Verification of the DUCT-III for calculation of high energy neutron streaming

CERN Document Server

Masukawa, F; Hayashi, K; Hirayama, H; Nakano, H; Nakashima, H; Sasamoto, N; Shin, K; Tayama, R I

2003-01-01

A large number of radiation streaming calculations under a variety of conditions are required as a part of shielding design for a high energy proton accelerator facility. Since sophisticated methods are very time consuming, simplified methods are employed in many cases. For accuracy evaluation of a simplified code DUCT-III for high energy neutron streaming calculations, two kinds of benchmark problems based on the experiments were analyzed. Through comparison of the DUCT-III calculations with both the measurements and the sophisticated Monte Carlo calculations, DUCT-III was seen reliable enough for applying to the shielding design for the Intense Proton Accelerator Facility.

An integrated framework for outsourcing using balanced score card and ELECTRE III

Directory of Open Access Journals (Sweden)

Sareh Namazi

2011-04-01

Full Text Available During the past few decades, many organizations have attempted to increase their productivity through outsourcing parts of their responsibilities. Outsourcing helps firms reduce their low value added activities and focus on their high value added activities. It also helps organization save their time and energy which leads to more efficient units. The idea of outsourcing is more important for project based organizations where the nature of works is different from a particular project to another one. This paper presents an integrated balanced score card system with an adaptation of ELECTRE III method to select suitable resources for outsourcing. The proposed model of the paper is implemented for a case study of subway system in Iran and the results are discussed.

Experimental studies and tests on An(III)/Ln(III) separation using the TODGA extractant

Energy Technology Data Exchange (ETDEWEB)

Heres, Xavier; Sorel, Christian; Miguirditchian, Manuel; Cames, Beatrice; Hill, Clement; Bisel, Isabelle; Espinoux, Denis; Viallesoubranne, Carole; Baron, Pascal; Lorrain, Brigitte [CEA/DEN/MAR/DRCP, Marcoule, BP17171, 30207 Bagnols/Ceze (France)

2009-06-15

Minor actinide recycling by separation and transmutation is worldwide considered as one of the most promising strategies to reduce the inventory of radioactive waste, thus contributing to make nuclear energy more sustainable. One of the different options investigated at the CEA Marcoule and within the ACSEPT project (a European collaborative project partly funded by the 7. EURATOM Framework Program) to separate trivalent minor actinide (Am(III)-Cf(III)) from the fission and activation products contained in PUREX raffinates is the TODGA process, which consists in: 1. Co-extracting trivalent 4f and 5f elements from highly acidic PUREX raffinates by a mixture of TODGA (tetraoctyl-diglycolamide) and TBP (tributyl-phosphate), dissolved in HTP (hydrogenated tetra-propene). 2. Selectively stripping the trivalent minor actinides by a hydrophilic poly-aminocarboxylic acid used as a complexing agent in a buffered aqueous solution, while the trivalent lanthanides are kept in the organic solvent thanks to a sodium nitrate salting-out effect. 3. Stripping the lanthanides in a diluted nitric acid solution. The major difficulty of this TODGA separation process is to tune the pH in a very narrow range of operating conditions in the second step, because of the high sensitivity of the performances of the flow-sheet vs pH. This difficulty was however overcome. This paper describes the development of the TODGA process from experimental studies to hot test implementation in shielded cells of the ATALANTE facility, including (i) the optimization of the extraction system (both the formulation of the organic solvent and those of the aqueous scrubbing and stripping solutions), (ii) the implementation of a cold test in small scale mixer-settlers in the G1 facility (MARCEL loop), using a surrogate feed composed of major fission products, (iii) the validation of some steps of the process, using a surrogate feed, spiked with Am-241 and Eu-152, and similar laboratory contactors (medium activity

REPLACEMENT SPARE PART INVENTORY MONITORING USING ADAPTIVE NEURO FUZZY INFERENCE SYSTEM

Directory of Open Access Journals (Sweden)

Hartono Hartono

2016-01-01

Full Text Available Abstract   The amount of inventory is determined on the basis of the demand. So that users can know the demand forecasts need to be done on the request. This study uses the data to implement a replacement parts on the electronic module production equipment in the telecommunications transmission systems, switching, access and power, ie by replacing the electronic module in the system is trouble  or damaged parts of a good electronic module spare parts inventory, while the faulty electronic modules shipped to the Repair Center for repaired again, so that the results of these improvements can replenish spare part  inventory. Parameters speed on improvement process of electronic module broken (repaired, in the form of an average repair time at the repair centers, in order to get back into the electronic module that is ready for used as spare parts in compliance with the safe supply inventory  warehouse.  This research using the method  of  Adaptive Neuro Fuzzy Inference System (ANFIS in developing a decision support system for inventory control of spare parts available in Warehouse Inventory taking into account several parameters supporters, namely demand, improvement and fulfillment of spare parts and repair time. This study uses a recycling input parameter repair faulty electronic module of the customer to immediately replace the module in inventory warehouse,  do improvements in the Repair Center. So the acceleration restoration factor is very influential as the input spare parts inventory supply in the warehouse and using the Adaptive Neuro-Fuzzy Inference System (ANFIS method.   Keywords: ANFIS, inventory control, replacement

Dopad regulace Basel III na exportní financování

OpenAIRE

Malešová, Jana

2016-01-01

The thesis focuses on the impact of the banking regulation Basel III on bank-intermediated trade finance. The theoretical part of the thesis explains details of Basel III requirements, history of Basel Accords and their future in the form of Basel IV, characteristics of trade finance products and of the whole industry. Trade finance industry voiced worries about the negative effect that these new requirements might have on trade finance business. The thesis estimates determinants of bank-inte...

[Characteristics of lipid metabolism and the cardiovascular system in glycogenosis types I and III].

Science.gov (United States)

Polenova, N V; Strokova, T V; Starodubova, A V

Glycogen storage disease (GSD) is an inherited metabolic disorder characterized by early childhood lipid metabolic disturbances with potentially proatherogenic effects. The review outlines the characteristics of impaired lipid composition and other changes in the cardiovascular system in GSD types I and III. It analyzes the factors enabling and inhibiting the development of atherosclerosis in patients with GSD. The review describes the paradox of vascular resistance to the development of early atherosclerosis despite the proatherogenic composition of lipids in the patients of this group.

OCCLUSION AND ARTICULATION IN BRUXISM AND BRUXOMANIA INVESTIGATED WITH THE SYSTEM T-SCAN III.

OpenAIRE

Mariana Dimova

2014-01-01

Aim: To be analyzed common features of occlusal relationships in patients with bruxism and bruxomania at maximum intercuspation (MIP) and eccentric jaw movements. Materials and Methods: 30 patients (22 women and 8 men, mean aged of 42,8 ± 13,3) with bruxism and/or bruxomania are examined with the system T-Scan III. Sequence of records is - at maximum intercuspation (MIP); in manual leading to central relation and in eccentric jaw movements. In the same sequence is investigated control ...

Prediction of ROSA-III experiment

International Nuclear Information System (INIS)

Soda, Kunihisa

1978-06-01

ROSA-III experiment with the simulated BWR system is to investigate thermal hydraulic behavior as well as ECCS performance in a postulated loss-of-coolant accident. RUN 701 assumes average core power, high and low pressure core sprays and low pressure injection of ECCS. Prediction of experiment RUN 701 was made with computer code RELAP-4J. The results indicate the need for ROSA-III pump characteristics to be clarified and for liquid level formation model to be improved. Comparison of the prediction results with the experimental data should reveal the areas of modifications in calculation model. (auth.)

PIO I-II tendencies case study. Part 1. Mathematical modeling

Directory of Open Access Journals (Sweden)

Adrian TOADER

2010-03-01

Full Text Available In the paper, a study is performed from the perspective of giving a method to reduce the conservatism of the well known PIO (Pilot-Induced Oscillation criteria in predicting the susceptibility of an aircraft to this very harmful phenomenon. There are three interacting components of a PIO – the pilot, the vehicle, and the trigger (in fact, the hazard. The study, conceived in two parts, aims to underline the importance of human pilot model involved in analysis. In this first part, it is shown, following classical sources, how the LQG theory of control and estimation is used to obtain a complex model of human pilot. The approach is based on the argument, experimentally proved, that the human behaves “optimally” in some sense, subject to his inherent psychophysical limitations. The validation of such model is accomplished based on the experimental model of a VTOL-type aircraft. Then, the procedure of inserting typical saturation nonlinearities in the open loop transfer function is presented. A second part of the paper will illustrate PIO tendencies evaluation by means of a grapho-analytic method.

Oxidation of Cr(III)-Fe(III) Mixed-phase Hydroxides by Chlorine: Implications on the Control of Hexavalent Chromium in Drinking Water.

Science.gov (United States)

Chebeir, Michelle; Liu, Haizhou

2018-05-17

The occurrence of chromium (Cr) as an inorganic contaminant in drinking water is widely reported. One source of Cr is its accumulation in iron-containing corrosion scales of drinking water distribution systems as Cr(III)-Fe(III) hydroxide, i.e., FexCr(1-x)(OH)3(s), where x represents the Fe(III) molar content and typically varies between 0.25 and 0.75. This study investigated the kinetics of inadvertent hexavalent chromium Cr(VI) formation via the oxidation of FexCr(1-x)(OH)3(s) by chlorine as a residual disinfectant in drinking water, and examined the impacts of Fe(III) content and drinking water chemical parameters including pH, bromide and bicarbonate on the rate of Cr(VI) formation. Data showed that an increase in Fe(III) molar content resulted in a significant decrease in the stoichiometric Cr(VI) yield and the rate of Cr(VI) formation, mainly due to chlorine decay induced by Fe(III) surface sites. An increase in bicarbonate enhanced the rate of Cr(VI) formation, likely due to the formation of Fe(III)-carbonato surface complexes that slowed down the scavenging reaction with chlorine. The presence of bromide significantly accelerated the oxidation of FexCr(1-x)(OH)3(s) by chlorine, resulting from the catalytic effect of bromide acting as an electron shuttle. A higher solution pH between 6 and 8.5 slowed down the oxidation of Cr(III) by chlorine. These findings suggested that the oxidative conversion of chromium-containing iron corrosion products in drinking water distribution systems can lead to the occurrence of Cr(VI) at the tap, and the abundance of iron, and a careful control of pH, bicarbonate and bromide levels can assist the control of Cr(VI) formation.

Synthesis and characterization of La(III), Pr(III), Nd(III), Sm(III), Eu(III), Gd(III), Tb(III) and Dy(III) complexes of 2-acetylfuran-2-thenoylhydrazone

International Nuclear Information System (INIS)

Singh, B.; Singh, Praveen K.

1998-01-01

The reaction of 2-acetylfuran-2-thenoylhydrazone(afth) with Ln(III) trichlorides yields complexes of the type [Ln(afth)Cl 2 (H 2 O)(EtOH)]Cl, [Ln(III) = La, Pr, Nd, Sm, Eu, Gd, Tb and Dy]. The complexes have been characterized by molar conductance, magnetic susceptibility and TGA and DTA measurements, magnetic susceptibility and TGA and DTA measurements, FAB mass, infrared, proton NMR, electronic absorption and emission spectra. The terbium complex is found to be monomer from the FAB mass spectrum. The IR and NMR spectra suggest neutral tridentate behaviour of the Schiff base. A coordination number seven is proposed around the metal ions. Emission spectra suggest C 3v , symmetry around the metal ion with capped octahedron geometry for the europium complex. (author)

Reactions of uranium (III) and (IV) compounds with ketones, nitriles and acid chlorides. Towards a use of uranium complexes in organic synthesis

International Nuclear Information System (INIS)

Adam, Raymond

1993-01-01

In this research thesis, the author shows that various organic molecules can be interestingly transformed into uranium complexes with degrees of oxidation of +3 or +4. In a first part, the author describes reactions of carbonyl compounds with the UCl 4 -Na(Hg) reducing system. Then, he addresses reductions of ketones, nitriles and acid chlorides by a uranium (III) complex: Cp 3 U(THF). The third part reports a detailed study of the reduction of ketones by U(BH 4 ) 4 [fr

Comparative Genomics Identifies a Novel Conserved Protein, HpaT, in Proteobacterial Type III Secretion Systems that Do Not Possess the Putative Translocon Protein HrpF

Directory of Open Access Journals (Sweden)

Céline Pesce

2017-06-01

Full Text Available Xanthomonas translucens is the causal agent of bacterial leaf streak, the most common bacterial disease of wheat and barley. To cause disease, most xanthomonads depend on a highly conserved type III secretion system, which translocates type III effectors into host plant cells. Mutagenesis of the conserved type III secretion gene hrcT confirmed that the X. translucens type III secretion system is required to cause disease on the host plant barley and to trigger a non-host hypersensitive response (HR in pepper leaves. Type III effectors are delivered to the host cell by a surface appendage, the Hrp pilus, and a translocon protein complex that inserts into the plant cell plasma membrane. Homologs of the Xanthomonas HrpF protein, including PopF from Ralstonia solanacearum and NolX from rhizobia, are thought to act as a translocon protein. Comparative genomics revealed that X. translucens strains harbor a noncanonical hrp gene cluster, which rather shares features with type III secretion systems from Ralstonia solanacearum, Paraburkholderia andropogonis, Collimonas fungivorans, and Uliginosibacterium gangwonense than other Xanthomonas spp. Surprisingly, none of these bacteria, except R. solanacearum, encode a homolog of the HrpF translocon. Here, we aimed at identifying a candidate translocon from X. translucens. Notably, genomes from strains that lacked hrpF/popF/nolX instead encode another gene, called hpaT, adjacent to and co-regulated with the type III secretion system gene cluster. An insertional mutant in the X. translucens hpaT gene, which is the first gene of a two-gene operon, hpaT-hpaH, was non-pathogenic on barley and did not cause the HR or programmed cell death in non-host pepper similar to the hrcT mutant. The hpaT mutant phenotypes were partially complemented by either hpaT or the downstream gene, hpaH, which has been described as a facilitator of translocation in Xanthomonas oryzae. Interestingly, the hpaT mutant was also complemented

Complexation of Cucurbit(7)uril with Eu(III)

International Nuclear Information System (INIS)

Kar, Aishwarya; Rawat, Neetika; Rao, Ankita; Tomar, B.S.; Nayak, S.K.; Ray, Alok

2014-01-01

Cucurbiturils (CBs) CB(n)s are macrocyclic molecules with carbonyl groups at the portals, which bind cations through ion dipole interactions and the cavity which stabilize hydrophobic moieties. The size of the portal and the volume of the interior cavities of CB(n)s are dependent on the number of glycoluril units present in CBs. CBs are widely used as supramolecular host systems in applications, such as formation of supramolecular hydrogels, drug delivery systems. Though the binding of CBs with organic guest molecules have been studied extensively where as metal complexation studies are very few. In the present work, complexation studies of Cucurbit(7)uril (with seven glycouril units, CB7) with Eu(III) were carried out using fluorescence, UV-vis spectrophotometry. The stability constant for 1:1 complex CB7-Eu(III) complex determined by monitoring the change in CB7 UV- vis absorption spectra on addition of Eu(III) was found to be 2.99 ± 0.08. The fluorescence spectra of increasing ligand to metal ratio exhibited the increase in the intensity ratio of peak at 616 and 592 which is the measure of complexation of Eu(III) with CB7 and was used to deduce the stability constant and the value (2.82 ± 0.07) obtained was in good agreement with that obtained from UV vis spectroscopy. Further, the life time of Eu(III) ion, which increased with CB7 to Eu(III) ratio, was used to deduce number of water molecules around Eu(III) metal ion which were found to decrease from 9 to 3 thereby suggesting inner sphere complexation. The stability constant of CB7 with Eu(III) is one order of magnitude less than CB5, derived in separate study by authors. The smaller cavity of CB5 (2.4 A 0 ) favors its interactions with Eu(III) ion of comparable diameter (2.16 A 0 ) leading to higher stability constant compared to CB7 (5.4 A 0 ) having larger cavity

Fosfato de cromo (III marcado con diferentes radionúclidos para uso en radiosinoviortesis Chromium (III phosphate labelled with several radionuclides for use in radiosynoviothersis

Directory of Open Access Journals (Sweden)

Jorge Cruz Arencibia

2012-06-01

Full Text Available Introducción: la radiosinoviortesis se utiliza en el tratamiento de la sinovitis crónica, complicación frecuente en enfermedades sistémicas como artritis reumatoide y hemofilia. En la práctica clínica internacional se emplean diferentes coloides y suspensiones radiactivas, pero su número es reducido y su disponibilidad limitada. Objetivo: obtención y caracterización físico-química de suspensiones de fosfato de cromo (III marcadas con radionúclidos como potenciales radiofármacos para uso en radiosinoviortesis. Métodos: las suspensiones se obtuvieron por síntesis química, los radionúclidos se añadieron al inicio de la reacción o después de finalizada esta. El tamaño de partículas se estimó mediante microscopia óptica y filtración por membranas. Asimismo se evaluó por espectrofotometría la estabilidad de la suspensión al ser resuspendida en distintos medios. La pureza radioquímica se determinó por cromatografía de papel. Resultados: se obtuvo y caracterizó una suspensión de fosfato de cromo (III. El producto obtenido presentó un tamaño de partículas predominante entre 0,8-5 µm y que al ser suspendidas en solución de gelatina al 2 % en tampón acetato 1 mg/mL no sedimentó en menos de 3 h. Se estableció la tecnología para la obtención de formulaciones de fosfato de cromo (III marcado con 32P e 90Y y se demostró la factibilidad de marcar la suspensión obtenida con otros radionúclidos trivalentes como 177Lu y 68Ga. Conclusiones: los resultados permiten considerar al fosfato de cromo (III una suspensión base para la obtención de radiofármacos para uso en radiosinoviortesis en diferentes articulaciones, en función de las características físico-nucleares de los radionúclidos que se empleen.Introduction: radiosynoviorthesis is used in treating chronic synovitis, a frequent complication of some systemic diseases as rheumatoid arthritis and hemophilia. There are different colloids and radioactive

La moisson des Argonautiques et la poétique d’Apollonios dans le chant III Harvesting in Argonautica and Apollonios' poetics in book III La mietitura delle Argonautiche e la poetica di Apollonio nel canto III

Directory of Open Access Journals (Sweden)

Françoise Létoublon

2013-05-01

Full Text Available Un’analisi comparativa dei paragoni presenti nel canto III delle Argonautiche e di quelli omerici mostra che Apollonio s’ispira fortemente ai suoi modelli, in modo particolare nella forma ed nel lessico. Eppure, nella maggior parte dei casi, egli porta i confronti omerici lontano dal loro contesto d’origine per adattarli ai suoi intenti. Nella prima parte del canto III, i similitudini rispondono alla volontà comune di evidenziare le pene che l’amore suscita nell’animo e nel comportamento di Medea. Nella seconda parte, le prove che Giasone deve superare danno luogo, in modo sorprendente, ad immagini guerriere funzionali alla descrizione dei preparativi, ma in seguito Apollonio ricorre ad un lessico artigianale ed agricolo per evocare dei compiti che consistono effettivamente nell’aggiogare e tirare una coppia di tori, in un’aratura, in una semina ed in una mietitura. L’aspetto più notevole è che molti paragoni riuniti verso la fine del canto non sembrano trovare un corrispondente in alcun modello omerico, come se il racconto di questa prova inedita avesse progressivamente liberato Apollonio dalla sua dipendenza da Omero.A detailed survey of the similes in Argonautica III, compared to the Homeric similes, shows that Apollonius very largely draws his inspiration from his models, mainly in the form and the words. However, he shifts the Homeric similes away from their original context to re-model them to his personal intention. In the first part of book III, the similes follow a common desire to show how many troubles love provokes in Medea’s soul and behaviour. In the second part, Jason’s ordeals provide the occasion for war images describing the preparation of the hero, but thereafter Apollonius resorts to a craftsmanship and agricultural register for evoking tasks that actually consist of hitching up, ploughing, sowing and harvesting. The most remarkable fact is that some comparisons grouped near the end of the book seem

Standard Technical Manual Identification Numbering System (TMINS). M0000-00-IDX-000 TMINS

Science.gov (United States)

1980-05-14

Systems 2-121 ALIrODIN I INAVMACS. IXS, KRIS. MPDS, CDPS) 2-121 AUTODIN 11 2-021 Shore Automated Systems fNAVCOMPARS, 2-121 NATtO Systems LDMX, IXS...see Table 2-5, Part III.C). a. This method has the following advantages : (1) It will allow the additional or deletion of parts without disrupting the

Preparation and characterisation of mixed ligand complexes of Co(III), Fe(III) and Cr(III) containing phthalimide and phenols

International Nuclear Information System (INIS)

Miah, M.A.J.; Islam, M.S.; Pal, S.C.; Barma, T.K.

1996-01-01

Some novel mixed ligand complexes of Co(III), Fe(III) and Cr(III) containing phthalimide as primary and 2-aminophenol and 3-aminophenol as secondary ligands have been synthesized and characterised on the basis of elemental analyses, conductivity and magnetic measurements and infrared and electronic spectral studies. Complexes containing 2-aminophenol are 1:1 electrolyte in N,N dimethylformamide. Spectral studies indicate that all the complexes exhibit octahedral geometry. The complexes have the general composition; K[M(pim)/sub 2/(L)/sub 2/]; where m=Co(III), Fe(III) and Cr(III), pim-anion of phthalimamide and L=anion of 2-aminophenol and 3-aminophenol. (author)

Variation of the solvation number of Eu(III) in mixed system of methanol and water

International Nuclear Information System (INIS)

Suganuma, H.; Arisaka, M.; Omori, T.; Satoh, I.; Choppin, G.R.

1999-01-01

The stability constants (β 1 ) of the monofluoride complex of Eu(III) have been determined in mixed solvents of methanol and water at a 0.10 M ionic strength using a solvent extraction technique. The values of ln β 1 increase as the mole fraction of methanol in the mixed solvent system increases. The variation in the stability constants can be correlated with both the large effect due to the solvation of F and the small effect due to both (1) the solvation of cations in connection with complexation and (2) the electrostatic attraction between Eu 3+ and F - . Based on the variation in the sum of (1) and (2) in water and the mixed solvent solutions, it was determined that the coordination number (CN) of Eu(III) varied from a mixture of CN = 9 and 8 to CN = 8 at about a 0.03 mole fraction of methanol in the mixed solvent. (orig.)

Spectrophotometric speciation of Fe(II) and Fe(III) using hydrazone-micelle systems and flow injections

International Nuclear Information System (INIS)

Khojali, Inas Osman

1999-04-01

Two hydrazones were synthesised, namely salicylhyrazone (SH) and trihydroxyacetophenone (THAPH) were synthesised with the objective of developing a method for determining of Fe(II) and Fe(III) in the presence of each other and hence the total iron.those hydrazones were selected so as to combine the ability of phenolic compounds to complex Fe(III) ions and the complexing characteristics of hydrazones. The complexes of Fe(II) S H and Fe(III) S H as well those of Fe(II)-THAPH and Fe(III)-THAPH had shown maximum absorbance at λ=412 nm which was not not modified by presence of micelles i.e. sodium n-dodecyl sulphate (SDS) and n-hexa dodecyl pyridinium bromide. The maximum absorbance for all complexes takes place around a neutral pH. Generally, in addition, of n-hexa dodecylpyridinium bromide to fe(II)-SH and Fe(III)-SH absorbance of the complexes increases with increasing the concentration of the micelle. The effects of the addition of sodium n-dodecyle sulphate (SDS) to Fe(III)-SH is also studied. Generally, increasing the concentration of the micelle decrease the absorbance of the complexes. To study the effect of the presence of Fe(II) and Fe(III) on the determination of each other,mixtures of Fe(II)-SH and Fe(III)-SH are studied. However, the use of ascorbic acid as a reducing reagent for Fe(III) did not produce the needed results but non reducible results, which may be due to the masking effect of ascorbic acid and thus making the metal not available to the ligand. However, conversion of Fe(II) to Fe(III) prior to the determination was avoided as this requires the use of oxidant, which will oxidise the ligand as well. To establish the condition for the maximum absorbance of THAPH complexes, the effect of the base was investigated by using sodium and ammonium hydroxide. Generally, increasing the concentration of the base decreases the abosrbance. as expected, ammonium hydroxide produced positive results than sodium hydroxide. After establishing the optimum Fi

Speciation of Am(III)/Eu(III) sorbed on γ-alumina. Effect of metal ion concentration

International Nuclear Information System (INIS)

Kumar, S.; Tomar, B.S.; Godbole, S.V.

2013-01-01

The present paper describes the speciation of Am(III)/Eu(III) sorbed on γ-alumina, and its evolution with changing metal ion concentration, studied using batch sorption experiment, time resolved fluorescence spectroscopy (TRFS), extended X-ray absorption fine structure (EXAFS) and surface Complexation modeling (SCM). Though numerous studies exist in the literature on the speciation of trivalent actinides and lanthanides on alumina surface, the mechanism of sorption at high metal ion concentrations is not yet fully understood. Batch sorption experiments of Am(III) on γ-alumina under varying condition of pH (3-10), ionic strength (0.005-0.1 M NaClO 4 ) and metal ion concentration (10 -7 -10 -4 M) were performed. Higher metal ion concentration was achieved by the addition of Eu(III) considering it as an analogue of Am(III). Time resolved fluorescence spectroscopy (TRFS) study of Eu(III) sorbed on γ-alumina at the metal ion concentration of 5.0 x 10 -5 M was carried out over pH 4 to 7. TRFS showed the presence of two surface species, with distinctly different fluorescence decay life times. The shorter lifetime value and its changing pattern with pH indicate the surface species corresponding to this component to be monodentate species > AlOAm 2+ and its hydrolyzed forms. The sorbed Eu 3+ species corresponding to the longer lifetime value has 2-3 water molecules in its first coordination sphere and is multidentate in its binding on alumina surface. Extended X-ray absorption fine structure (EXAFS) measurement of Eu:γ-Al 2 O 3 sorption systems at pH 6.18 and 7.15 corroborate the existence of two surface complexes. Further it suggests the edge sharing bidentate binding of Eu on AlO 6 octahedra as the co-ordination mode of the higher lifetime component. Surface Complexation Modeling (SCM) of Am(III)/Eu(III) sorption onto γ-alumina at pH ≤7 has been carried out using these two surface species. 2-pK surface complexation modeling coupled with constant capacitance model

Human – Computer Systems Interaction Backgrounds and Applications 2 Part 1

CERN Document Server

Kulikowski, Juliusz; Mroczek, Teresa

2012-01-01

The main contemporary human-system interaction (H-SI) problems consist in design and/or improvement of the tools for effective exchange of information between individual humans or human groups and technical systems created for humans aiding in reaching their vital goals. This book is a second issue in a series devoted to the novel in H-SI results and contributions reached for the last years by many research groups in European and extra-European countries. The preliminary (usually shortened) versions of the chapters  were presented as conference papers at the 3rd International Conference on H-SI held in Rzeszow, Poland, in 2010. A  large number of valuable papers  selected for publication caused a necessity to publish the book in two volumes. The given, 1st Volume  consists of sections devoted to: I. Decision Supporting Systems, II. Distributed Knowledge Bases and WEB Systems and III. Impaired Persons  Aiding Systems. The decision supporting systems concern various application areas, like enterprises mana...

Acid-base titrations by stepwise addition of equal volumes of titrant with special reference to automatic titrations-III Presentation of a fully automatic titration apparatus and of results supporting the theories given in the preceding parts.

Science.gov (United States)

Pehrsson, L; Ingman, F

1977-02-01

This paper forms Part III of a series in which the first two parts describe methods for evaluating titrations performed by stepwise addition of equal volumes of titrant. The great advantage of these methods is that they do not require an accurate calibration of the electrode system. This property makes the methods very suitable for routine work. e.g., in automatic analysis. An apparatus for performing such titrations automatically is presented. Further, results of titrations of monoprotic acids, a diprotic acid, an ampholyte, a mixture of an acid with its conjugate base, and mixtures of two acids with a small difference between the stability constants are given. Most of these titrations cannot be evaluated by the Gran or Hofstee methods but yield results having errors of the order of 0.1% if the methods proposed in Parts I and II of this series are employed. The advantages of the method of stepwise addition of equal volumes of titrant combined with the proposed evaluation methods, in comparison with common methods such as titration to a preset pH, are that all the data are used in the evaluation, permitting a statistical treatment and giving better possibilities for tracing systematic errors.

Multisensor system for determination of iron(II), iron(III), uranium(VI) and uranium(IV) in complex solutions

International Nuclear Information System (INIS)

Legin, A.V.; Seleznev, B.L.; Rudnitskaya, A.M.; Vlasov, Yu.G.; Tverdokhlebov, S.V.; Mack, B.; Abraham, A.; Arnold, T.; Baraniak, L.; Nitsche, H.

1999-01-01

Development and analytical evaluation of a multisensor system based on the principles of 'electronic tongue' for the determination of low contents of uranium(VI), uranium(IV), iron(II) and iron(III) in complex aqueous media have been carried out. A set of 29 different chemical sensors on the basis of all- solid-state crystalline and vitreous materials with enhanced electronic conductivity and redox and ionic cross-sensitivity have been incorporated into the sensor array. Multidimensional data have been processed by pattern recognition methods such as artificial neural networks and partial least squares. It has been demonstrated that Fe(II) and Fe(III) contents in the range from 10 -7 to 10 -4 mol L -1 of total iron concentration can be determined with the average precision of about 25 %. U(VI) and U(IV) contents can been determined with the average precision of 10-40% depending on the concentration. The developed multisensor system can be applied in future for the analysis of mining and borehole waters as well other contaminated natural media, including on-site measurements. (author)

Phase II and III the next generation of CLS beamline control and data acquisition systems

International Nuclear Information System (INIS)

Matias, E.; Beauregard, D.; Berg, R.; Black, G.; Boots, M.J.; Dolton, W.; Hunter, D.; Igarashi, R.; Liu, D.; Maxwell, D.; Miller, C.D.; Wilson, T.; Wright, G.

2012-01-01

The Canadian Light Source (CLS) is nearing the completion of its suite of Phase II Beamlines and in detailed design of its Phase III Beamlines. The paper presents an overview of the overall approach adopted by CLS in the development of beamline control and data acquisition systems. Building on the experience of our first phase of beamlines the CLS has continued to make extensive use of EPICS with EDM and QT based user interfaces. Increasing interpretive languages such as Python are finding a place in the beamline control systems. Web based environment such as ScienceStudio have also found a prominent place in the control system architecture as we move to tighter integration between data acquisition, visualization and data analysis. (authors)

Structural Properties of the Cr(III)-Fe(III) (Oxy)Hydroxide Compositional Series: Insights for a Nanomaterial 'Solid Solution'

International Nuclear Information System (INIS)

Tang, Y.; Zhang, L.; Michel, F.M.; Harrington, R.; Parise, J.B.; Reeder, R.J.

2010-01-01

Chromium(III) (oxy)hydroxide and mixed Cr(III)-Fe(III) (oxy)hydroxides are environmentally important compounds for controlling chromium speciation and bioaccessibility in soils and aquatic systems and are also industrially important as precursors for materials and catalyst synthesis. However, direct characterization of the atomic arrangements of these materials is complicated because of their amorphous X-ray properties. This study involves synthesis of the complete Cr(III)-Fe(III) (oxy)hydroxide compositional series, and the use of complementary thermal, microscopic, spectroscopic, and scattering techniques for the evaluation of their structural properties. Thermal analysis results show that the Cr end member has a higher hydration state than the Fe end member, likely associated with the difference in water exchange rates in the first hydration spheres of Cr(III) and Fe(III). Three stages of weight loss are observed and are likely related to the loss of surface/structural water and hydroxyl groups. As compared to the Cr end member, the intermediate composition sample shows lower dehydration temperatures and a higher exothermic transition temperature. XANES analysis shows Cr(III) and Fe(III) to be the dominant oxidation states. XANES spectra also show progressive changes in the local structure around Cr and Fe atoms over the series. Pair distribution function (PDF) analysis of synchrotron X-ray total scattering data shows that the Fe end member is nanocrystalline ferrihydrite with an intermediate-range order and average coherent domain size of ∼27 (angstrom). The Cr end member, with a coherent domain size of ∼10 (angstrom), has only short-range order. The PDFs show progressive structural changes across the compositional series. High-resolution transmission electron microscopy (HRTEM) results also show the loss of structural order with increasing Cr content. These observations provide strong structural evidence of chemical substitution and progressive structural

Intelligent control of HVAC systems. Part I: Modeling and synthesis

Directory of Open Access Journals (Sweden)

Adrian TOADER

2013-03-01

Full Text Available This is the first part of a work on intelligent type control of Heating, Ventilating and Air-Conditioning (HVAC systems. The study is performed from the perspective of giving a unitary control method to ensure high energy efficiency and air quality improving. To illustrate the proposed HVAC control technique, in this first part it is considered as benchmark problem a single thermal space HVAC system. The construction of the mathematical model is performed only with a view to obtain a framework of HVAC intelligent control validation by numerical simulations. The latter will be reported in a second part of the study.

Transactive System: Part II: Analysis of Two Pilot Transactive Systems using Foundational Theory and Metrics

Energy Technology Data Exchange (ETDEWEB)

Lian, Jianming [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, Y. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kalsi, Karanjit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wu, Di [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ren, Huiying [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2018-01-24

This document is the second of a two-part report. Part 1 reviewed several demonstrations of transactive control and compared them in terms of their payoff functions, control decisions, information privacy, and mathematical solution concepts. It was suggested in Part 1 that these four listed components should be adopted for meaningful comparison and design of future transactive systems. Part 2 proposes qualitative and quantitative metrics that will be needed to compare alternative transactive systems. It then uses the analysis and design principles from Part 1 while conducting more in-depth analysis of two transactive demonstrations: the American Electric Power (AEP) gridSMART Demonstration, which used a double –auction market mechanism, and a consensus method like that used in the Pacific Northwest Smart Grid Demonstration. Ultimately, metrics must be devised and used to meaningfully compare alternative transactive systems. One significant contribution of this report is an observation that the decision function used for thermostat control in the AEP gridSMART Demonstration has superior performance if its decision function is recast to more accurately reflect the power that will be used under for thermostatic control under alternative market outcomes.

SDSS-III: MASSIVE SPECTROSCOPIC SURVEYS OF THE DISTANT UNIVERSE, THE MILKY WAY, AND EXTRA-SOLAR PLANETARY SYSTEMS

International Nuclear Information System (INIS)

Eisenstein, Daniel J.; Weinberg, David H.; Agol, Eric; Anderson, Scott F.; Aihara, Hiroaki; Allende Prieto, Carlos; Arns, James A.; Aubourg, Eric; Bailey, Stephen; Balbinot, Eduardo; Barkhouser, Robert; Beers, Timothy C.; Berlind, Andreas A.; Bickerton, Steven J.; Bizyaev, Dmitry; Blanton, Michael R.; Bochanski, John J.; Bolton, Adam S.

2011-01-01

Building on the legacy of the Sloan Digital Sky Survey (SDSS-I and II), SDSS-III is a program of four spectroscopic surveys on three scientific themes: dark energy and cosmological parameters, the history and structure of the Milky Way, and the population of giant planets around other stars. In keeping with SDSS tradition, SDSS-III will provide regular public releases of all its data, beginning with SDSS Data Release 8 (DR8), which was made public in 2011 January and includes SDSS-I and SDSS-II images and spectra reprocessed with the latest pipelines and calibrations produced for the SDSS-III investigations. This paper presents an overview of the four surveys that comprise SDSS-III. The Baryon Oscillation Spectroscopic Survey will measure redshifts of 1.5 million massive galaxies and Lyα forest spectra of 150,000 quasars, using the baryon acoustic oscillation feature of large-scale structure to obtain percent-level determinations of the distance scale and Hubble expansion rate at z 5 evolved, late-type stars, measuring separate abundances for ∼15 elements per star and creating the first high-precision spectroscopic survey of all Galactic stellar populations (bulge, bar, disks, halo) with a uniform set of stellar tracers and spectral diagnostics. The Multi-object APO Radial Velocity Exoplanet Large-area Survey (MARVELS) will monitor radial velocities of more than 8000 FGK stars with the sensitivity and cadence (10-40 m s -1 , ∼24 visits per star) needed to detect giant planets with periods up to two years, providing an unprecedented data set for understanding the formation and dynamical evolution of giant planet systems. As of 2011 January, SDSS-III has obtained spectra of more than 240,000 galaxies, 29,000 z ≥ 2.2 quasars, and 140,000 stars, including 74,000 velocity measurements of 2580 stars for MARVELS.

SDSS-III: Massive Spectroscopic Surveys of the Distant Universe, the Milky Way, and Extra-Solar Planetary Systems

Science.gov (United States)

Eisenstein, Daniel J.; Weinberg, David H.; Agol, Eric; Aihara, Hiroaki; Allende Prieto, Carlos; Anderson, Scott F.; Arns, James A.; Aubourg, Éric; Bailey, Stephen; Balbinot, Eduardo; Barkhouser, Robert; Beers, Timothy C.; Berlind, Andreas A.; Bickerton, Steven J.; Bizyaev, Dmitry; Blanton, Michael R.; Bochanski, John J.; Bolton, Adam S.; Bosman, Casey T.; Bovy, Jo; Brandt, W. N.; Breslauer, Ben; Brewington, Howard J.; Brinkmann, J.; Brown, Peter J.; Brownstein, Joel R.; Burger, Dan; Busca, Nicolas G.; Campbell, Heather; Cargile, Phillip A.; Carithers, William C.; Carlberg, Joleen K.; Carr, Michael A.; Chang, Liang; Chen, Yanmei; Chiappini, Cristina; Comparat, Johan; Connolly, Natalia; Cortes, Marina; Croft, Rupert A. C.; Cunha, Katia; da Costa, Luiz N.; Davenport, James R. A.; Dawson, Kyle; De Lee, Nathan; Porto de Mello, Gustavo F.; de Simoni, Fernando; Dean, Janice; Dhital, Saurav; Ealet, Anne; Ebelke, Garrett L.; Edmondson, Edward M.; Eiting, Jacob M.; Escoffier, Stephanie; Esposito, Massimiliano; Evans, Michael L.; Fan, Xiaohui; Femenía Castellá, Bruno; Dutra Ferreira, Leticia; Fitzgerald, Greg; Fleming, Scott W.; Font-Ribera, Andreu; Ford, Eric B.; Frinchaboy, Peter M.; García Pérez, Ana Elia; Gaudi, B. Scott; Ge, Jian; Ghezzi, Luan; Gillespie, Bruce A.; Gilmore, G.; Girardi, Léo; Gott, J. Richard; Gould, Andrew; Grebel, Eva K.; Gunn, James E.; Hamilton, Jean-Christophe; Harding, Paul; Harris, David W.; Hawley, Suzanne L.; Hearty, Frederick R.; Hennawi, Joseph F.; González Hernández, Jonay I.; Ho, Shirley; Hogg, David W.; Holtzman, Jon A.; Honscheid, Klaus; Inada, Naohisa; Ivans, Inese I.; Jiang, Linhua; Jiang, Peng; Johnson, Jennifer A.; Jordan, Cathy; Jordan, Wendell P.; Kauffmann, Guinevere; Kazin, Eyal; Kirkby, David; Klaene, Mark A.; Knapp, G. R.; Kneib, Jean-Paul; Kochanek, C. S.; Koesterke, Lars; Kollmeier, Juna A.; Kron, Richard G.; Lampeitl, Hubert; Lang, Dustin; Lawler, James E.; Le Goff, Jean-Marc; Lee, Brian L.; Lee, Young Sun; Leisenring, Jarron M.; Lin, Yen-Ting; Liu, Jian; Long, Daniel C.; Loomis, Craig P.; Lucatello, Sara; Lundgren, Britt; Lupton, Robert H.; Ma, Bo; Ma, Zhibo; MacDonald, Nicholas; Mack, Claude; Mahadevan, Suvrath; Maia, Marcio A. G.; Majewski, Steven R.; Makler, Martin; Malanushenko, Elena; Malanushenko, Viktor; Mandelbaum, Rachel; Maraston, Claudia; Margala, Daniel; Maseman, Paul; Masters, Karen L.; McBride, Cameron K.; McDonald, Patrick; McGreer, Ian D.; McMahon, Richard G.; Mena Requejo, Olga; Ménard, Brice; Miralda-Escudé, Jordi; Morrison, Heather L.; Mullally, Fergal; Muna, Demitri; Murayama, Hitoshi; Myers, Adam D.; Naugle, Tracy; Neto, Angelo Fausti; Nguyen, Duy Cuong; Nichol, Robert C.; Nidever, David L.; O'Connell, Robert W.; Ogando, Ricardo L. C.; Olmstead, Matthew D.; Oravetz, Daniel J.; Padmanabhan, Nikhil; Paegert, Martin; Palanque-Delabrouille, Nathalie; Pan, Kaike; Pandey, Parul; Parejko, John K.; Pâris, Isabelle; Pellegrini, Paulo; Pepper, Joshua; Percival, Will J.; Petitjean, Patrick; Pfaffenberger, Robert; Pforr, Janine; Phleps, Stefanie; Pichon, Christophe; Pieri, Matthew M.; Prada, Francisco; Price-Whelan, Adrian M.; Raddick, M. Jordan; Ramos, Beatriz H. F.; Reid, I. Neill; Reyle, Celine; Rich, James; Richards, Gordon T.; Rieke, George H.; Rieke, Marcia J.; Rix, Hans-Walter; Robin, Annie C.; Rocha-Pinto, Helio J.; Rockosi, Constance M.; Roe, Natalie A.; Rollinde, Emmanuel; Ross, Ashley J.; Ross, Nicholas P.; Rossetto, Bruno; Sánchez, Ariel G.; Santiago, Basilio; Sayres, Conor; Schiavon, Ricardo; Schlegel, David J.; Schlesinger, Katharine J.; Schmidt, Sarah J.; Schneider, Donald P.; Sellgren, Kris; Shelden, Alaina; Sheldon, Erin; Shetrone, Matthew; Shu, Yiping; Silverman, John D.; Simmerer, Jennifer; Simmons, Audrey E.; Sivarani, Thirupathi; Skrutskie, M. F.; Slosar, Anže; Smee, Stephen; Smith, Verne V.; Snedden, Stephanie A.; Stassun, Keivan G.; Steele, Oliver; Steinmetz, Matthias; Stockett, Mark H.; Stollberg, Todd; Strauss, Michael A.; Szalay, Alexander S.; Tanaka, Masayuki; Thakar, Aniruddha R.; Thomas, Daniel; Tinker, Jeremy L.; Tofflemire, Benjamin M.; Tojeiro, Rita; Tremonti, Christy A.; Vargas Magaña, Mariana; Verde, Licia; Vogt, Nicole P.; Wake, David A.; Wan, Xiaoke; Wang, Ji; Weaver, Benjamin A.; White, Martin; White, Simon D. M.; Wilson, John C.; Wisniewski, John P.; Wood-Vasey, W. Michael; Yanny, Brian; Yasuda, Naoki; Yèche, Christophe; York, Donald G.; Young, Erick; Zasowski, Gail; Zehavi, Idit; Zhao, Bo

2011-09-01

Building on the legacy of the Sloan Digital Sky Survey (SDSS-I and II), SDSS-III is a program of four spectroscopic surveys on three scientific themes: dark energy and cosmological parameters, the history and structure of the Milky Way, and the population of giant planets around other stars. In keeping with SDSS tradition, SDSS-III will provide regular public releases of all its data, beginning with SDSS Data Release 8 (DR8), which was made public in 2011 January and includes SDSS-I and SDSS-II images and spectra reprocessed with the latest pipelines and calibrations produced for the SDSS-III investigations. This paper presents an overview of the four surveys that comprise SDSS-III. The Baryon Oscillation Spectroscopic Survey will measure redshifts of 1.5 million massive galaxies and Lyα forest spectra of 150,000 quasars, using the baryon acoustic oscillation feature of large-scale structure to obtain percent-level determinations of the distance scale and Hubble expansion rate at z R = λ/Δλ ≈ 1800) optical spectra of 118,000 stars in a variety of target categories, probing chemical evolution, stellar kinematics and substructure, and the mass profile of the dark matter halo from the solar neighborhood to distances of 100 kpc. APOGEE, the Apache Point Observatory Galactic Evolution Experiment, will obtain high-resolution (R ≈ 30,000), high signal-to-noise ratio (S/N >= 100 per resolution element), H-band (1.51 μm data set for understanding the formation and dynamical evolution of giant planet systems. As of 2011 January, SDSS-III has obtained spectra of more than 240,000 galaxies, 29,000 z >= 2.2 quasars, and 140,000 stars, including 74,000 velocity measurements of 2580 stars for MARVELS.

Practicing radiation oncology in the current health care environment - Part III: Information systems for radiation oncology practice

International Nuclear Information System (INIS)

Kijewski, Peter

1996-01-01

Purpose: This course will review topics to be considered when defining an information systems plan for a department of radiation oncology. A survey of available systems will be presented. Computer information systems can play an important role in the effective administration and operation of a department of radiation oncology. Tasks such as 1) scheduling for physicians, patients, and rooms, 2) charge collection and billing, 3) administrative reporting, and 4) treatment verification can be carried out efficiently with the assistance of computer systems. Operating a department without a state of art computer system will become increasingly difficult as hospitals and healthcare buyers increasingly rely on computer information technology. Communication of the radiation oncology system with outside systems will thus further enhance the utility of the computer system. The steps for the selection and installation of an information system will be discussed: 1) defining the objectives, 2) selecting a suitable system, 3) determining costs, 4) setting up maintenance contracts, and 5) planning for future upgrades

Automated System Marketplace 1993. Part I: Focus on Minicomputers.

Science.gov (United States)

Bridge, Frank R.

1993-01-01

The first part of the annual automation marketplace survey examines minicomputer systems in libraries. Highlights include vendor consolidation and acquisitions; system interconnection; networked databases; products related to the Americans with Disabilities Act; multimedia; vendor installations worldwide; academic versus public library…

MONETARY CONFORMATION OF THE CORPORATE GOVERNMENTALITY III DESCRIPTION OF THE MONETARY SYSTEM

Directory of Open Access Journals (Sweden)

Eduardo Rivera Vicencio

2016-04-01

Full Text Available This paper describes the current monetary system, identifying different components and the relationship between them. It is part of the Foucaultian approach of power relations and forms part of a body of work on the monetary conformation of corporate governmentality. It also forms part of the theoretical framework: the general monetary theory and, in particular, the quantity theory of money and the theory of business cycles. It describes four major components such as international organizations with effects on the money supply, states from dominant or dominated economies, the economy of large financial and non-financial companies and the real economy, made up of families and small and medium size companies. Within these four main components, there are different levels of action and influence in the money supply. The relationships, that are addressed, are the relationships which occur within each one of the components and the relationships between the different components. In these relationships between components of the monetary system, the creation of excess money supply is explained which produced the economic crisis as a result of the structure of the monetary system and its historical conformation. This document also describes the conformation of rent appropriation and yields, together with the process of the concentration of wealth, where the monetary system acts as an essential tool for achieving these purposes by large companies.

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XIII, I--MAINTAINING THE FUEL SYSTEM (PART III), CUMMINS DIESEL ENGINES, II--RADIATOR SHUTTER SYSTEM.

Science.gov (United States)

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE CONSTRUCTION, OPERATION, AND MAINTENANCE OF THE DIESEL ENGINE FUEL AND RADIATOR SHUTTER SYSTEMS. TOPICS ARE (1) MORE ABOUT THE CUMMINS FUEL SYSTEM, (2) CALIBRATING THE PT FUEL PUMP, (3) CALIBRATING THE FUEL INJECTORS, (4) UNDERSTANDING THE SHUTTER SYSTEM, (5) THE…

Space Shuttle dosimetry measurements with RME-III

International Nuclear Information System (INIS)

Hardy, K.A.; Golightly, M.J.; Hardy, A.C.; Atwell, W.; Quam, W.

1991-10-01

A description of the radiation monitoring equipment (RME-III) dosimetry instrument and the results obtained from six Space Shuttle flights are presented. The RME-III is a self-contained, active (real-time), portable dosimeter system developed for the USAF and adapted for utilization in measuring the ionizing radiation environment on the Space Shuttle. This instrument was developed to incorporate the capabilities of two earlier radiation instruments into a single unit and to minimize crew interaction times with longer battery life and expanded memory capacity. Flight data has demonstrated that the RME-III can be used to accurately assess dose from various sources of exposure, such as that encountered in the complex radiation environment of space

Basel III : how have banks adjusted to increase CET1 ratios?

OpenAIRE

Bjerketvedt, Oda; Arneberg-Bauer, Tonje

2013-01-01

In 2010 the Basel Committee finalised the global framework called Basel III, which will have a significant impact on the global banking sector. A large part of the framework focuses on capital adequacy, where the Common Equity Tier 1 (CET1) ratio is essential. Through an analysis of four banks from the United Kingdom – HSBC, Barclays, Lloyds Banking Group and Standard Chartered – this thesis aim to examine how these banks have adjusted to the new CET1 requirements. In the EU the Basel III ...

ESCRT-III mediated cell division in Sulfolobus acidocaldarius –A reconstitution perspective

Directory of Open Access Journals (Sweden)

Tobias eHärtel

2014-06-01

Full Text Available In the framework of Synthetic Biology, it has become an intriguing question what would be the minimal representation of cell division machinery. Thus, it seems appropriate to compare how cell division is realized in different microorganisms. In particular, the cell division system of Crenarchaeota lacks certain proteins found in most bacteria and Euryarchaeota, such as FtsZ, MreB or the Min system. The Sulfolobaceae family encodes functional homologs of the eukaryotic proteins Vps4 and ESCRT-III. ESCRT-III is essential for several eukaryotic pathways, e.g. budding of intralumenal vesicles (ILVs, or cytokinesis, whereas Vps4 dissociates the ESCRT-III complex from the membrane. CdvA (Cell Division A is required for the recruitment of crenarchaeal ESCRT-III proteins to the membrane at mid-cell. The proteins polymerize and form a smaller structure during constriction. Thus, ESCRT-III mediated cell division in S. acidocaldarius shows functional analogies to the Z ring observed in prokaryotes like E. coli, which has recently begun to be reconstituted in vitro. In this short perspective, we discuss the possibility of building such an in vitro cell division system on basis of archaeal ESCRT-III.

Systems and economics for the estimation of uranium potential supply

International Nuclear Information System (INIS)

Harris, D.P.; Ortiz-Vertiz, R.; Chavex, M.L.; Agbolosoo, E.K.

1981-07-01

This report consists of four parts, each one reasonably complete unto itself: Part I - Potential Supply Systems Based upon the Simulation of Sequential Exploration and Economic Decisions -- Systems Designed for the Analysis of NURE Endowment; Part II - Crustal Abundance and a Potential Supply System; Part III - An Investigation of Productivity and Technical Change in Exploration for and Production of Uranium; and Part IV - The Use of Solute Transport Models to Generate Geochemical Responses from a Hypothetical Uranium Deposit - An Early Effort in the Exploration Model Design. The bulk of this research was devoted to the design of potential supply systems. However, in that such systems require the modeling of exploration and exploitation, both of these activities were investigated as economic phenomena and as the subjects of models. Part I represents the largest of the research efforts. An attempt was made to design a system in which exploration is modeled in terms of both its efficiency and economics. While the exploration model demonstrated in this report is for roll-type sandstone deposits, this potential supply system, as a system per se, also applies to tabular deposits (San Juan Basin). Part II explores the concept of crustal abundance and existing crustal abundance models. The design of this crustal abundance potential supply system differs from that of any previously constructedcrustal abundance models in that it explicitly considers the third dimension, depth to deposit, and it places great emphasis upon the credible representation of the economics of exploration and exploitation. Part III reports on an attempt to measure the magnitude of technical change and depletion on the productivity of exploration and mining. This research examined these issues from the perspective of the economist, not the engineer. Part IV reports on an investigation of the feasibility of modeling the geochemical exploration for uranium, radon, and helium plumes

SGN III code conversion from Apollo to HP

International Nuclear Information System (INIS)

Lee, Hae Cho

1996-04-01

SGN III computer code is used to analyze transient behavior of reactor coolant system, pressurizer and steam generators in the event of main steam line break (MSLB), and to calculate mass and energy release for containment design. This report firstly describes detailed work carried out for installation of SFN III on Apollo DN 10000 and code validation results after installation. Secondly, a series of work is also describes in relation to installation of SGN III on HP 9000/700 series as well as relevant code validation results. Attached is a report on software verification and validation results. 8 refs. (Author) .new

Solvation and complexation study by fluorescence spectroscopy of Eu(III) and Cm(III) ions in octanol solution and at the interface with water

International Nuclear Information System (INIS)

Vu, T.H.

2008-01-01

Polydentate N-donors ligands like bis-triazine-pyridine (BTP) and bis-triazine-bis-pyridine (BTBP) can selectively extract minor actinides (III) from lanthanides (III) ions and therefore have been studied in the field of nuclear waste reprocessing. The aim of the researches carried out during this thesis is a better description of this family in biphasic systems: speciation in the organic phase and around the interfacial area. After an exhaustive description of the solvation of europium(III) cation in mixed solutions n-octanol water with TRLIF spectrometry, the complexation with nitrogen ligands iPr-BTP, C5-BTBP and CyMe4-BTBP has been studied by TRLIF and ESI-MS techniques. For each compound, the inner sphere of europium has been described and the conditional stability constants determined. The composition of the organic medium, and particularly the hydration degree of n-octanol, has an impact on the nature and the ratio of species 'cation - counter ion - ligand - water'. With high water content (representative of extraction systems), the complexes observed with Cm(III) and Eu(III) have the same stoichiometry but the affinity towards the curium cation is higher and consistent to separation factors measured with biphasic systems. The method TIRF (total internal reflection fluorescence) was retained to study the behaviour of europium(III) inside the interfacial area. Fluorescence spectra of europium have been obtained but side signals and the high depth resolution of detection lead to difficulty in obtaining the signal of interfacial europium alone. The selected technique remains promising but some improvements need to be implemented for forthcoming measurement at liquid/liquid interface. (author) [fr

Intensity of adjuvant chemotherapy regimens and grade III-V toxicities among elderly stage III colon cancer patients.

Science.gov (United States)

van Erning, F N; Razenberg, L G E M; Lemmens, V E P P; Creemers, G J; Pruijt, J F M; Maas, H A A M; Janssen-Heijnen, M L G

2016-07-01

The aim of this study was to provide insight in the use, intensity and toxicity of therapy with capecitabine and oxaliplatin (CAPOX) and capecitabine monotherapy (CapMono) among elderly stage III colon cancer patients treated in everyday clinical practice. Data from the Netherlands Cancer Registry were used. All stage III colon cancer patients aged ≥70 years diagnosed in the southeastern part between 2005 and 2012 and treated with CAPOX or CapMono were included. Differences in completion of all planned cycles, cumulative dosages and toxicity between both regimens were evaluated. One hundred ninety-three patients received CAPOX and 164 patients received CapMono; 33% (n = 63) of the patients receiving CAPOX completed all planned cycles of both agents, whereas 55% (n = 90) of the patients receiving CapMono completed all planned cycles (P characteristics, CapMono was associated with a lower odds of developing grade III-V toxicity than CAPOX (odds ratio 0.54, 95% confidence interval 0.33-0.89). For patients treated with CAPOX, the most common toxicities were gastrointestinal (29%), haematological (14%), neurological (11%) and other toxicity (13%). For patients treated with CapMono, dermatological (17%), gastrointestinal (13%) and other toxicity (11%) were the most common. CAPOX is associated with significantly more grade III-V toxicities than CapMono, which had a pronounced impact on the cumulative dosage received and completion of all planned cycles. In this light, CapMono seems preferable over CAPOX. Copyright © 2016 Elsevier Ltd. All rights reserved.

Luminescence study on solvation of americium(III), curium(III) and several lanthanide(III) ions in nonaqueous and binary mixed solvents

International Nuclear Information System (INIS)

Kimura, T.; Nagaishi, R.; Kato, Y.; Yoshida, Z.

2001-01-01

The luminescence lifetimes of An(III) and Ln(III) ions [An=Am and Cm; Ln=Nd, Sm, Eu, Tb and Dy] were measured in dimethyl sulfoxide(DMSO), N,N-dimethylformamide(DMF), methanol(MeOH), water and their perdeuterated solvents. Nonradiative decay rates of the ions were in the order of H 2 O > MeOH > DMF > DMSO, indicating that O-H vibration is more effective quencher than C-H, C=O, and S=O vibrations in the solvent molecules. Maximal lifetime ratios τ D /τ H were observed for Eu(III) in H 2 O, for Sm(III) in MeOH and DMF, and for Sm(III) and Dy(III) in DMSO. The solvent composition in the first coordination sphere of Cm(III) and Ln(III) in binary mixed solvents was also studied by measuring the luminescence lifetime. Cm(III) and Ln(III) were preferentially solvated by DMSO in DMSO-H 2 O, by DMF in DMF-H 2 O, and by H 2 O in MeOH-H 2 O over the whole range of the solvent composition. The order of the preferential solvation, i.e., DMSO > DMF > H 2 O > MeOH, correlates with the relative basicity of these solvents. The Gibbs free energy of transfer of ions from water to nonaqueous solvents was further estimated from the degree of the preferential solvation. (orig.)

Electrically driven hybrid Si/III-V Fabry-Pérot lasers based on adiabatic mode transformers.

Science.gov (United States)

Ben Bakir, B; Descos, A; Olivier, N; Bordel, D; Grosse, P; Augendre, E; Fulbert, L; Fedeli, J M

2011-05-23

We report the first demonstration of an electrically driven hybrid silicon/III-V laser based on adiabatic mode transformers. The hybrid structure is formed by two vertically superimposed waveguides separated by a 100-nm-thick SiO2 layer. The top waveguide, fabricated in an InP/InGaAsP-based heterostructure, serves to provide optical gain. The bottom Si-waveguides system, which supports all optical functions, is constituted by two tapered rib-waveguides (mode transformers), two distributed Bragg reflectors (DBRs) and a surface-grating coupler. The supermodes of this hybrid structure are controlled by an appropriate design of the tapers located at the edges of the gain region. In the middle part of the device almost all the field resides in the III-V waveguide so that the optical mode experiences maximal gain, while in regions near the III-V facets, mode transformers ensure an efficient transfer of the power flow towards Si-waveguides. The investigated device operates under quasi-continuous wave regime. The room temperature threshold current is 100 mA, the side-mode suppression ratio is as high as 20 dB, and the fiber-coupled output power is ~7 mW.

Separation of Am(III) from Eu(III) by mixtures of triazynylbipyridine and bis(dicarbollide) extractants. The composition of the metal complexes extracted

International Nuclear Information System (INIS)

Narbutt, J.; Krejzler, J.

2006-01-01

Separation of trivalent actinides, in particular americium and curium, from lanthanides is an important step in an advanced partitioning process for future reprocessing of spent nuclear fuels. The use of soft donor (N and S) ligands makes it possible to separate the two groups of elements, probably because of the more covalent character in the complexes with actinides compared to the lanthanides. The aim of present work was to study solvent extraction of Am(III) and Eu(III) in a similar system with diethylhemi-BTP and COSAN: protonated bis(chlorodicarbollido)cobalt(III) or commo-3,3-cobalta-bis(8,9,12-trichlora-1,2-dicarbaclosododecaborane)ic acid. The present research was focused on both the determination of conditions for the separation of 241 Am(III) from 152 Eu in aqueous nitrate solution by using a synergistic extraction system and on the modelling of the process by slope analysis. Obtained values of the separation factors supported by the computer modelling permitted drawing the conclusions on the mechanism of the process and on the structure of extracted species

Doublet III construction and engineering test

International Nuclear Information System (INIS)

Anon.

1979-01-01

Progress during FY-78 on the construction and operation of the Doublet III is reported. Detailed discussions about the installation and testing of various components and subsystems, including the B-coil, E-coil, F-coils and support structure, vacuum vessel, vacuum pumping system, limiter, thermal insulation blanket, control system, B-coil power system, E-coil power system, F-coil power system, and motor-generator, are presented. A brief review of the engineering test operation is given

Multiple excitation of supports - Part 2 : Implementation in TUBO system

International Nuclear Information System (INIS)

Galeao, A.C.N.R.; Barbosa, H.J.C.

1980-12-01

From the formulation of multiple excitation support problem, discussed in the first part of this work, and with the use of numerical techniques presented there, we discuss in this second part, the implementation in TUBO system, the follow procedure: Direct integration, Modal overlap, Spectral response emphasizing the aspects related to supports excitation. Finally, we present two numerical examples of TUBO system utilization in the solution of support movement problem. The several implemented computational procedures are compared. (E.G.) [pt

Basel III – Between Global Thinking and Local Acting

Directory of Open Access Journals (Sweden)

Vasile DEDU

2012-06-01

Full Text Available The financial crisis has demonstrated that self-regulation is not sufficient to markets and financial institutions with systemic importance.Permissive regulatory policies, allowing the development speed of global banking financial system, have played an important role in emphasizing the upward slope of the financial crisis.The new regulations known as Basel III framework aimed the strengthening of prudential capital and liquidity of financial institutions and create a stronger banking and financial system more resilient to shocks.Basel III is trying to eliminate the shortcomings of Basel II, by more extensive rules on integrated risk management in banking and financial environment.

Association of Eu(III) and Cm(III) with Bacillus subtilis and Halobacterium salinarum

International Nuclear Information System (INIS)

Ozaki, Takuo; Kimura, Takaumi; Ohnuki, Toshihiko; Yoshida, Zenko

2002-01-01

Adsorption behavior of Eu(III) and Cm(III) by Bacillus subtilis and Halobacterium salinarum was investigated. Both microorganisms showed almost identical pH dependence on the distribution ratio (K d ) of the metals examined, i.e., K d of Eu(III) and Cm(III) increased with an increase of pH. The coordination state of Eu(III) adsorbed on the microorganisms was studied by time-resolved laser-induced fluorescence spectroscopy (TRLFS). The coordination states of Eu(III) adsorbed on the B. subtilis and H. salinarum was of different characteristics. H. salinarum exhibited more outer-spherical interaction with Eu(III) than B. subtilis. (author)

Antipsychotics and Sexual Dysfunction: Sexual Dysfunction - Part III

Directory of Open Access Journals (Sweden)

Anil Kumar Mysore Nagaraj

2009-11-01

Full Text Available Satisfying sexual experience is an essential part of a healthy and enjoyable life for most people. Antipsychotic drugs are among the various factors that affect optimal sexual functioning. Both conventional and novel antipsychotics are associated with significant sexual side effects. This review has presented various studies comparing different antipsychotic drugs. Dopamine antagonism, increased serum prolactin, serotonergic, adrenergic and cholinergic mechanisms are all proposed to be the mechanisms for sexual dysfunction. Drug treatment for this has not given satisfactory long-term results. Knowledge of the receptor pharmacology of an individual antipsychotic will help to determine whether it is more or less likely to cause sexual side effects and its management.

FY 1979 Annual report on Sunshine Project results. Fabrication designs for a solar thermal power pilot plant with curved-surface type light-collecting system (Part 2); 1979 nendo taiyonetsu hatsuden (kyokumen shuko hoshiki) seika hokokusho. 2. Pilot plant no seisaku sekkei

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-03-01

Part 1 of this report (JN0040511) describes basic and fabrication design specifications for operation and control of a solar thermal power pilot plant with curved-surface type light-collecting system, centered by computer for the plant control. Part 2 follows Part 1, which describes basic fabrication design specifications (Chapter I), system design specifications (Chapter II), hardware specifications (Chapter III) and attachments (Chapter IV), to contain the other attachments: daily processing specifications, computer-aided processing function specifications, operator request function specifications, summary data collection function specifications, basic structures of the software systems, basic specifications for computer inputting/outputting, failure display panel drawings, COD/channel base dimension drawings, console inputting/outputting dimension drawings, T/W disc dimension drawings, viewer external dimension drawings, cassette MT structure dimension drawings, operator console panel drawings, power source panel dimension drawings, program specifications GFC, 4 subroutine specifications GFC (R sub), table list, table structure drawings, and analysis of system characteristics (light- and heat-collection system simulation). (NEDO)

Revised SNAP III Training Manual

Energy Technology Data Exchange (ETDEWEB)

Moss, Calvin Elroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gonzales, Samuel M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Myers, William L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Nelson, Mark Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rothrock, Richard Brian [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Salazar, Samuel A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sorensen, Eric Byron [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sundby, Gary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-21

The Shielded Neutron Assay Probe (SNAP) technique was developed to determine the leakage neutron source strength of a radioactive object. The original system consisted of an Eberline^TM Mini-scaler and discrete neutron detector. The system was operated by obtaining the count rate with the Eberline^TM instrument, determining the absolute efficiency from a graph, and calculating the neutron source strength by hand. In 2003 the SNAP III, shown in Figure 1, was designed and built. It required the operator to position the SNAP, and then measure the source-to-detector and detectorto- reflector distances. Next the operator entered the distance measurements and started the data acquisition. The SNAP acquired the required count rate and then calculated and displayed the leakage neutron source strength (NSS). The original design of the SNAP III is described in SNAP III Training Manual (ER-TRN-PLN-0258, Rev. 0, January 2004, prepared by William Baird) This report describes some changes that have been made to the SNAP III. One important change is the addition of a LEMO connector to provide neutron detection output pulses for input to the MC-15. This feature is useful in active interrogation with a neutron generator because the MC-15 has the capability to only record data when it is not gated off by a pulse from the neutron generator. This avoids recording of a lot of data during the generator pulses that are not useful. Another change was the replacement of the infrared RS-232 serial communication output by a similar output via a 4-pin LEMO connector. The current document includes a more complete explanation of how to estimate the amount of moderation around a neutron-emitting source.

Effect of pKa on the extraction behavior of Am(III) in organo phosphorus acid and diglycolamide solvent system

International Nuclear Information System (INIS)

Swami, K. Rama; Antony, M.P.; Homi Bhabha National Institute, Mumbai; Kumaresan, R.; Nayak, P.K.; Venkatesan, K.A.

2018-01-01

A combination of neutral and acidic extractant has been proposed for the single-cycle separation of trivalent actinides from high-level liquid waste (HLLW). The nature of acidic extractant in the combined solvent formulation plays a profound role in deciding the extraction and stripping of trivalent actinides. Therefore, the extraction behavior of Am(III) in a solution of tetra-bis(2-ethylhexyl)-diglycolamide (TEHDGA) and acidic extractant (HA) was studied from nitric acid medium. The acidic extractants chosen were bis(2-ethylhexyl)phosphoric acid (HDEHP), bis(2-ethylhexyl)phosphonic acid (PC88A) and bis(2,4,4-trimethylpentyl)phosphinic acid (CYANEX-272) whose pKa values were 3.24, 4.51 and 6.37, respectively. The distribution ratio of Am(III) was measured as a function of various parameters such as concentration of nitric acid, TEHDGA, HA etc. The data were compared with those obtained in individual solvent systems namely 0.1 M TEHDGA/n-DD and HA/n-DD. Slope analysis of the extraction data indicated the synergic participation of both TEHDGA and HDEHP in the extraction of Am(III) at all acidities. However, antagonistic effect was observed at lower acidity when TEHDGA was mixed to PC88A or CYANEX-272 present in n-DD. Accordingly, a suitable mechanism has been proposed for the extraction of Am(III) at all acidities using these combined solvent formulation. Studies with fast reactor simulated high level liquid waste indicated that extraction of Am(III) was accompanied by co-extraction of lanthanides and unwanted metal ions such as Zr(IV), Mo(VI), Y(III) and Pd(II). However, addition of trans-1,2-diaminocyclohexane-N,N,N,N ' -tetraaceticacid (CyDTA) reduced the extraction of unwanted metal ions. Batch extraction and stripping studies indicated the possibility of using 0.1 M TEHDGA+0.25 M HDEHP in n-dodecane for the single cycle separation of Am(III) from FR-SHLLW.

Energy decay in a Timoshenko-type system for thermoelasticity of type III with distributed delay and past history

Directory of Open Access Journals (Sweden)

Jianghao Hao

2018-03-01

Full Text Available In this work, we consider a one-dimensional Timoshenko system of thermoelasticity of type III with past history and distributive delay. It is known that an arbitrarily small delay may be the source of instability. We establish the well-posedness and the stability of the system for the cases of equal and nonequal speeds of wave propagation respectively. Our results show that the damping effect is strong enough to uniformly stabilize the system even in the presence of time delay under suitable conditions and improve the related results.

Sorption of small amounts of europium(III) on iron(III) hydroxide and oxide

International Nuclear Information System (INIS)

Music, S.; Gessner, M.; Wolf, R.H.H.

1979-01-01

The sorption of small amounts of europium(III) on iron(III) hydroxide and oxide has been studied as a function of pH. The mechanism of sorption is discussed. Optimum conditions have been found for the preconcentration of small or trace amounts of europium(III) by iron(III) hydroxide and oxide. The influence of complexing agents (EDTA, oxalate, tartrate and 5-sulfosalicylic acid) on the sorption of small amounts of europium(III) on iron(III) oxide has also been studied. (author)

Waste retrieval sluicing system vapor sampling and analysis plan for evaluation of organic emissions, process test phase III

International Nuclear Information System (INIS)

SASAKI, L.M.

1999-01-01

This sampling and analysis plan identifies characterization objectives pertaining to sample collection, laboratory analytical evaluation, and reporting requirements for vapor samples obtained to address vapor issues related to the sluicing of tank 241-C-106. Sampling will be performed in accordance with Waste Retrieval Sluicing System Emissions Collection Phase III (Jones 1999) and Process Test Plan Phase III, Waste Retrieval Sluicing System Emissions Collection (Powers 1999). Analytical requirements include those specified in Request for Ecology Concurrence on Draft Strategy/Path Forward to Address Concerns Regarding Organic Emissions from C-106 Sluicing Activities (Peterson 1998). The Waste Retrieval Sluicing System was installed to retrieve and transfer high-heat sludge from tank 241-C-106 to tank 241-AY-102, which is designed for high-heat waste storage. During initial sluicing of tank 241-C-106 in November 1998, operations were halted due to detection of unexpected high volatile organic compounds in emissions that exceeded regulatory permit limits. Several workers also reported smelling sharp odors and throat irritation. Vapor grab samples from the 296-C-006 ventilation system were taken as soon as possible after detection; the analyses indicated that volatile and semi-volatile organic compounds were present. In December 1998, a process test (phase I) was conducted in which the pumps in tanks 241-C-106 and 241-AY-102 were operated and vapor samples obtained to determine constituents that may be present during active sluicing of tank 241-C-106. The process test was suspended when a jumper leak was detected. On March 7, 1999, phase I1 of the process test was performed; the sluicing system was operated for approximately 7 hours and was ended using the controlled shutdown method when the allowable amount of solids were transferred to 241-AY-102. The phase II test was successful, however, further testing is required to obtain vapor samples at higher emission levels

Discontinuity and complexity in nonlinear physical systems

CERN Document Server

Baleanu, Dumitru; Luo, Albert

2014-01-01

This unique book explores recent developments in experimental research in this broad field, organized in four distinct sections. Part I introduces the reader to the fractional dynamics and Lie group analysis for nonlinear partial differential equations. Part II covers chaos and complexity in nonlinear Hamiltonian systems, important to understand the resonance interactions in nonlinear dynamical systems, such as Tsunami waves and wildfire propagations; as well as Lev flights in chaotic trajectories, dynamical system synchronization and DNA information complexity analysis. Part III examines chaos and periodic motions in discontinuous dynamical systems, extensively present in a range of systems, including piecewise linear systems, vibro-impact systems and drilling systems in engineering. And in Part IV, engineering and financial nonlinearity are discussed. The mechanism of shock wave with saddle-node bifurcation and rotating disk stability will be presented, and the financial nonlinear models will be discussed....

[The application of Edgewise technique auxillary with extra oral anchorage and class III elastic in the treatment of bimaxillary protrusion.].

Science.gov (United States)

Liu, H H; Weng, S E; Chen, R J

1995-12-01

In the treatment of growing bimaxillary protrusion patients,Edgewise technique auxillary with extra oral anchorage and class III elastic help to improve the patient's chin shape,recover his beauty of lower facial part and get a good occlusion along with the growing of mandible.The purpose of this study is:analysis the force system in the treatment and evaluate the result of the treatment with some typical cases.

The SPI-1-like Type III secretion system: more roles than you think.

Science.gov (United States)

Egan, Frank; Barret, Matthieu; O'Gara, Fergal

2014-01-01

The type III secretion system (T3SS) is a protein delivery system which is involved in a wide spectrum of interactions, from mutualism to pathogenesis, between Gram negative bacteria and various eukaryotes, including plants, fungi, protozoa and mammals. Various phylogenetic families of the T3SS have been described, including the Salmonella Pathogenicity Island 1 family (SPI-1). The SPI-1 T3SS was initially associated with the virulence of enteric pathogens, but is actually found in a diverse array of bacterial species, where it can play roles in processes as different as symbiotic interactions with insects and colonization of plants. We review the multiple roles of the SPI-1 T3SS and discuss both how these discoveries are changing our perception of the SPI-1 family and what impacts this has on our understanding of the specialization of the T3SS in general.

The SPI-1-like Type III secretion system: more roles than you think

Science.gov (United States)

Egan, Frank; Barret, Matthieu; O’Gara, Fergal

2014-01-01

The type III secretion system (T3SS) is a protein delivery system which is involved in a wide spectrum of interactions, from mutualism to pathogenesis, between Gram negative bacteria and various eukaryotes, including plants, fungi, protozoa and mammals. Various phylogenetic families of the T3SS have been described, including the Salmonella Pathogenicity Island 1 family (SPI-1). The SPI-1 T3SS was initially associated with the virulence of enteric pathogens, but is actually found in a diverse array of bacterial species, where it can play roles in processes as different as symbiotic interactions with insects and colonization of plants. We review the multiple roles of the SPI-1 T3SS and discuss both how these discoveries are changing our perception of the SPI-1 family and what impacts this has on our understanding of the specialization of the T3SS in general. PMID:24575107

An ultraviolet-visible spectrophotometer automation system. Part 3: Program documentation

Science.gov (United States)

Roth, G. S.; Teuschler, J. M.; Budde, W. L.

1982-07-01

The Ultraviolet-Visible Spectrophotometer (UVVIS) automation system accomplishes 'on-line' spectrophotometric quality assurance determinations, report generations, plot generations and data reduction for chlorophyll or color analysis. This system also has the capability to process manually entered data for the analysis of chlorophyll or color. For each program of the UVVIS system, this document contains a program description, flowchart, variable dictionary, code listing, and symbol cross-reference table. Also included are descriptions of file structures and of routines common to all automated analyses. The programs are written in Data General extended BASIC, Revision 4.3, under the RDOS operating systems, Revision 6.2. The BASIC code has been enhanced for real-time data acquisition, which is accomplished by CALLS to assembly language subroutines. Two other related publications are 'An Ultraviolet-Visible Spectrophotometer Automation System - Part I Functional Specifications,' and 'An Ultraviolet-Visible Spectrophotometer Automation System - Part II User's Guide.'

Structural characterization of CFA/III and Longus type IVb pili from enterotoxigenic Escherichia coli.

Science.gov (United States)

Kolappan, Subramaniapillai; Roos, Justin; Yuen, Alex S W; Pierce, Owen M; Craig, Lisa

2012-05-01

The type IV pili are helical filaments found on many Gram-negative pathogenic bacteria, with multiple diverse roles in pathogenesis, including microcolony formation, adhesion, and twitching motility. Many pathogenic enterotoxigenic Escherichia coli (ETEC) isolates express one of two type IV pili belonging to the type IVb subclass: CFA/III or Longus. Here we show a direct correlation between CFA/III expression and ETEC aggregation, suggesting that these pili, like the Vibrio cholerae toxin-coregulated pili (TCP), mediate microcolony formation. We report a 1.26-Å resolution crystal structure of CofA, the major pilin subunit from CFA/III. CofA is very similar in structure to V. cholerae TcpA but possesses a 10-amino-acid insertion that replaces part of the α2-helix with an irregular loop containing a 3(10)-helix. Homology modeling suggests a very similar structure for the Longus LngA pilin. A model for the CFA/III pilus filament was generated using the TCP electron microscopy reconstruction as a template. The unique 3(10)-helix insert fits perfectly within the gap between CofA globular domains. This insert, together with differences in surface-exposed residues, produces a filament that is smoother and more negatively charged than TCP. To explore the specificity of the type IV pilus assembly apparatus, CofA was expressed heterologously in V. cholerae by replacing the tcpA gene with that of cofA within the tcp operon. Although CofA was synthesized and processed by V. cholerae, no CFA/III filaments were detected, suggesting that the components of the type IVb pilus assembly system are highly specific to their pilin substrates.

Phase-ambiguity resolution for QPSK modulation systems. Part 1: A review

Science.gov (United States)

Nguyen, Tien Manh

1989-01-01

Part 1 reviews the current phase-ambiguity resolution techniques for QPSK coherent modulation systems. Here, those known and published methods of resolving phase ambiguity for QPSK with and without Forward-Error-Correcting (FEC) are discussed. The necessary background is provided for a complete understanding of the second part where a new technique will be discussed. An appropriate technique to the Consultative Committee for Space Data Systems (CCSDS) is recommended for consideration in future standards on phase-ambiguity resolution for QPSK coherent modulation systems.

Extracción de cromo con disolventes orgánicos. III parte. Aplicación al tratamiento de residuos polimetálicos industriales

Directory of Open Access Journals (Sweden)

de Juan, D.

1998-10-01

Full Text Available The use of Primene 81R as extraction agent of chromium present in solid wastes containing nickel, iron and copper has been studied. The waste was leached with a sulphuric acid solution up to pH 3 and oxidation of Cr(III to Cr(VI with Caro acid was also studied. Because of the negative result of oxidation, the treatment was applied on Cr(III directly. Extraction/scrubbing/stripping process was studied in the leach. The composition of organic phase used in the extraction step was 10 % v/v Primene 81R, 10 % isodecanol and kerosene. All the iron, 91 % Cr, 10 % Ni and large part of the copper contained in the initial leach solution are recovered in the organic phase. In the scrubbing stage (with a sulphuric acid solution at pH 1,4, all the copper and nickel and 30 % Cr go to the washing liquor, while all the iron and 70 % Cr remained in the organic phase. In the stripping stage (with a 2N NH₄OH or 2N NaOH solution all the iron and chromium are recovered as a precipitate of highly absorbent hydroxides. After the treatment mentioned, 63 % Cr and 100 % Fe are recovered as a mixture of hydroxides, and 28 % of the initial chromium, all the nickel and the copper are found in the washing liquor.

Se estudia la aplicación del Primene 81R como agente de extracción del cromo presente en residuos sólidos que poseen níquel, hierro y cobre. El residuo se lixivió con disolución de ácido sulfúrico hasta pH 3 y se investigó la oxidación del Cr(III a Cr(VI con ácido de Caro. Ante el nulo resultado en la oxidación, se actuó directamente sobre el Cr(III. Se estudió el proceso de extracción/lavado/reextracción sobre la lejía de lixiviación. La fase orgánica empleada en la extracción estaba constituida por 10 % v/v de Primene 81R, 10 % de isodecanol y queroseno. En la fase orgánica se recupera todo el hierro, el 91 % Cr, el 10 % Ni y gran parte del cobre contenidos en la lejía de partida. En la etapa de lavado (con disolución de �

Application of UV-irradiated Fe(III)-nitrilotriacetic acid (UV-Fe(III)NTA) and UV-NTA-Fenton systems to degrade model and natural occurring naphthenic acids.

Science.gov (United States)

Zhang, Ying; Chelme-Ayala, Pamela; Klamerth, Nikolaus; Gamal El-Din, Mohamed

2017-07-01

Naphthenic acids (NAs) are a highly complex mixture of organic compounds naturally present in bitumen and identified as the primary toxic constituent of oil sands process-affected water (OSPW). This work investigated the degradation of cyclohexanoic acid (CHA), a model NA compound, and natural occurring NAs during the UV photolysis of Fe(III)-nitrilotriacetic acid (UV-Fe(III)NTA) and UV-NTA-Fenton processes. The results indicated that in the UV-Fe(III)NTA process at pH 8, the CHA removal increased with increasing NTA dose (0.18, 0.36 and 0.72 mM), while it was independent of the Fe(III) dose (0.09, 0.18 and 0.36 mM). Moreover, the three Fe concentrations had no influence on the photolysis of the Fe(III)NTA complex. The main responsible species for the CHA degradation was hydroxyl radical (OH), and the role of dissolved O 2 in the OH generation was found to be negligible. Real OSPW was treated with the UV-Fe(III)NTA and UV-NTA-Fenton advanced oxidation processes (AOPs). The removals of classical NAs (O 2 -NAs), oxidized NAs with one additional oxygen atom (O 3 -NAs) and with two additional oxygen atoms (O 4 -NAs) were 44.5%, 21.3%, and 25.2% in the UV-Fe(III)NTA process, respectively, and 98.4%, 86.0%, and 81.0% in the UV-NTA-Fenton process, respectively. There was no influence of O 2 on the NA removal in these two processes. The results also confirmed the high reactivity of the O 2 -NA species with more carbons and increasing number of rings or double bond equivalents. This work opens a new window for the possible treatment of OSPW at natural pH using these AOPs. Copyright © 2017 Elsevier Ltd. All rights reserved.

An Axiomatic Design Approach of Nanofluid-Engineered Nuclear Safety Features for Generation III+ React

International Nuclear Information System (INIS)

Bang, In Cheol; Heo, Gyun Young; Jeong, Yong Hoon; Heo, Sun

2009-01-01

A variety of Generation III/III+ reactor designs featuring enhanced safety and improved economics are being proposed by nuclear power industries around the world to solve the future energy supply shortfall. Nanofluid coolants showing an improved thermal performance are being considered as a new key technology to secure nuclear safety and economics. However, it should be noted that there is a lack of comprehensible design works to apply nanofluids to Generation III+ reactor designs. In this work, the review of accident scenarios that consider expected nanofluid mechanisms is carried out to seek detailed application spots. The Axiomatic Design (AD) theory is then applied to systemize the design of nanofluid-engineered nuclear safety systems such as Emergency Core Cooling System (ECCS) and External Reactor Vessel Cooling System (ERVCS). The various couplings between Gen-III/III+ nuclear safety features and nanofluids are investigated and they try to be reduced from the perspective of the AD in terms of prevention/mitigation of severe accidents. This study contributes to the establishment of a standard communication protocol in the design of nanofluid-engineered nuclear safety systems

HERBIG-HARO OBJECTS IN THE LUPUS I AND III MOLECULAR CLOUDS

International Nuclear Information System (INIS)

Wang Hongchi; Henning, Thomas

2009-01-01

We performed a deep search for Herbig-Haro (HH) objects toward the Lupus I and III clouds, covering a sky area of ∼ 1 and ∼ 0.5 deg 2 , respectively. In total, 11 new HH objects, HH 981--991, are discovered. The HH objects both in Lupus I and in Lupus III tend to be concentrated in small areas. The HH objects detected in Lupus I are located in a region of radius 0.26 pc near the young star Sz 68. The abundance of HH objects shows that this region of the cloud is active in on-going star formation. HH objects in the Lup III cloud are concentrated in the central part of the cloud around the Herbig Ae/Be stars HR 5999 and 6000. HH 981 and 982 in Lupus I are probably driven by the young brown dwarf SSTc2d J154457.9-342340 which has a mass of 50 M J . HH 990 and 991 in Lup III align well with the HH 600 jet emanating from the low-mass star Par-Lup3-4, and are probably excited by this low-mass star of spectral type M5. High proper motions for HH 228 W, E, and E2 are measured, which confirms that they are excited by the young star Th 28. In contrast, HH 78 exhibits no measurable proper motion in the time span of 18 years, indicating that HH 78 is unlikely part of the HH 228 flow. The HH objects in Lup I and III are generally weak in terms of brightness and dimension in comparison to HH objects we detected with the same technique in the R CrA and Cha I clouds. Through a comparison with the survey results from the Spitzer c2d program, we find that our optical survey is more sensitive, in terms of detection rate, than the Spitzer IRAC survey to high-velocity outflows in the Lup I and III clouds.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 1: System engineering

Science.gov (United States)

Hanley, G. M.

1979-01-01

Volume 2, Part 1, of a seven volume report is presented. Part 1 encompasses Satellite Power Systems (SPS) systems engineering aspects and is divided into three sections. The first section presents descriptions of the various candidate concepts considered and conclusions and recommendations for a preferred concept. The second section presents a summary of results of the various trade studies and analysis conducted during the course of the study. The third section describes the Photovoltaic Satellite Based Satellite Power System (SPS) Point Design as it was defined through studies performed during the period January 1977 through March 1979.

Effect of Eu(III) on the degradation of malic acid by Pseudomonas fluorescens

International Nuclear Information System (INIS)

Nankawa, T.; Ozaki, T.; Ohnuki, T.; Suzuki, Y.; Francis, A.J.

2005-01-01

Full text of publication follows: The transuranic elements, such as Am(III) and Cm(III), are highly toxic because they emit high-energy α particles and have long half-lives. To estimate their long-term environmental behavior, we need to elucidate degradation of actinide-organic complexes by microorganisms. We studied the biodegradation of Eu(III)-malic acid complexes by Pseudomonas fluorescens. Malic acid is ubiquitous in the environment and is one of the microbial metabolites that is part of the tri-carboxylic acid (TCA) cycle. Europium(III) is a good analogue for Am(III) and Cm(III). To investigate the effect of Eu(III) on the degradation of malic acid by P. fluorescens, we compared the degradation behavior of Eu(III)-malic acid complexes to that of Fe(III) and Al(III)-malic acid complexes. In the medium containing 1 mM malic acid and 0-0.5 mM Fe(III), malic acid was degraded completely. In the medium containing 1 mM malic acid and 0.05-0.5 mM Al(III), malic acid was degraded until the concentration of malic acid became equal to that of Al(III), indicating that Al(III)-malic acid complex with 1: 1 molar ratio was recalcitrant to biodegradation. In the medium containing 1 mM malic acid and 0.05-0.5 mM Eu(III), degradation of malic acid was not observed. The effect of metals on degradation of malic acid was in the order of Fe(III) < Al(III) < Eu(III). The stability constants of 1:1 Fe(III)-, Al(III)-, and Eu(III)-malic acid complexes are 7.1, 4.6, and 4.9, respectively. These results indicate that degradability of malic acid does not depend on the stability constants of metal-malic acid complexes. We found that 10 mM malic acid was degraded in the presence of 0.05 and 0.1 mM Eu(III) but 1 mM malic acid was not degraded in the presence of 0.05 and 0.1 mM Eu(III). The degradation rate of malic acid increased with a decreasing ratio of Eu(III) to malic acid. (authors)

Quantum field theory III. Gauge theory. A bridge between mathematicians and physicists

International Nuclear Information System (INIS)

Zeidler, Eberhard

2011-01-01

In this third volume of his modern introduction to quantum field theory, Eberhard Zeidler examines the mathematical and physical aspects of gauge theory as a principle tool for describing the four fundamental forces which act in the universe: gravitative, electromagnetic, weak interaction and strong interaction. Volume III concentrates on the classical aspects of gauge theory, describing the four fundamental forces by the curvature of appropriate fiber bundles. This must be supplemented by the crucial, but elusive quantization procedure. The book is arranged in four sections, devoted to realizing the universal principle force equals curvature: Part I: The Euclidean Manifold as a Paradigm Part II: Ariadne's Thread in Gauge Theory Part III: Einstein's Theory of Special Relativity Part IV: Ariadne's Thread in Cohomology For students of mathematics the book is designed to demonstrate that detailed knowledge of the physical background helps to reveal interesting interrelationships among diverse mathematical topics. Physics students will be exposed to a fairly advanced mathematics, beyond the level covered in the typical physics curriculum. Quantum Field Theory builds a bridge between mathematicians and physicists, based on challenging questions about the fundamental forces in the universe (macrocosmos), and in the world of elementary particles (microcosmos). (orig.)

Function and operation of the Doublet III E-coil vacuum breaker system

International Nuclear Information System (INIS)

Callis, R.W.; Jackson, G.; DeGrassie, J.; Peterson, P.; LeVine, F.

1979-11-01

The ohmic heating system for the Doublet III fusion research device at General Atomic is required to provide the voltage for the initial breakdown phase (there is no preionization) along with the energy to drive the plasma current to a value of 2.5 MA or greater. This requires a peak one turn voltage of 250 volts (16 kV across coil terminals) and a magnetic flux swing of 5 volt-seconds (peak coil current of 110 kA). This voltage and flux swing is accomplished by reverse biasing the ohmic heating coil (E-coil) where, upon reaching a value of 110 ka the coil current is interrupted and commutated into a RC network producing 16 kV across the coil. The interrruption of the E-coil current is accomplished by the use of an array of vacuum circuit breakers (VCB's) and a counter plus network. A description is given of the ohmic heating circuit and the performance of the vacuum circuit breaker array and its counter pulse system

Effects upon metabolic pathways and energy production by Sb(III and As(III/Sb(III-oxidase gene aioA in Agrobacterium tumefaciens GW4.

Directory of Open Access Journals (Sweden)

Jingxin Li

Full Text Available Agrobacterium tumefaciens GW4 is a heterotrophic arsenite [As(III]/antimonite [Sb(III]-oxidizing strain. The As(III oxidase AioAB is responsible for As(III oxidation in the periplasm and it is also involved in Sb(III oxidation in Agrobacterium tumefaciens 5A. In addition, Sb(III oxidase AnoA and cellular H2O2 are also responsible for Sb(III oxidation in strain GW4. However, the deletion of aioA increased the Sb(III oxidation efficiency in strain GW4. In the present study, we found that the cell mobility to Sb(III, ATP and NADH contents and heat release were also increased by Sb(III and more significantly in the aioA mutant. Proteomics and transcriptional analyses showed that proteins/genes involved in Sb(III oxidation and resistance, stress responses, carbon metabolism, cell mobility, phosphonate and phosphinate metabolism, and amino acid and nucleotide metabolism were induced by Sb(III and were more significantly induced in the aioA mutant. The results suggested that Sb(III oxidation may produce energy. In addition, without periplasmic AioAB, more Sb(III would enter bacterial cells, however, the cytoplasmic AnoA and the oxidative stress response proteins were significantly up-regulated, which may contribute to the increased Sb(III oxidation efficiency. Moreover, the carbon metabolism was also activated to generate more energy against Sb(III stress. The generated energy may be used in Sb transportation, DNA repair, amino acid synthesis, and cell mobility, and may be released in the form of heat.

Multisensor system for determination of iron(II), iron(III) and uranium(VI) in complex solutions

International Nuclear Information System (INIS)

Legin, A.V.; Seleznev, B.L.; Rudnitskaya, A.M.; Vlasov, Yu.G.

1998-01-01

The aim of the present paper is the development and analytical evaluation of a multisensor system for determination of low content of iron(II), iron(III) and uranium(VI) in complex aqueous media. Sensor array included sensors on the basis of chalcogenide vitreous materials with redox and ionic cross-sensitivities, crystalline silver sulphide electrode, noble metal electrodes Pt, Au, Ag and redox sensor on the basis of oxide glass. Potentiometric measurements have been taken in a conventional electrochemical cell vs. a standard Ag/AgCl reference electrode. All measurements have been taken at room temperature. Calibration solutions contained UO 2 (NO 3 ) 2 in concentration range 10 -6 -1,610 -5 mol/L, K 3 Fe(CN) 6 and K 4 Fe(CN) 6 or FeSO 4 (NH 4 ) 2 SO 4 and FeCl 3 , with the ratio of Fe(II)/Fe(III) concentration from 100:1 to 1:100, the total concentration of Fe was 10 -4 and 10 -5 mol/L. All solutions have been made on the background electrolyte of calcium and magnesium chlorides and sulphates with the fixed content of 5-27 mmol/L of each component which is a typical one for groundwater or mining water. Sensor potentials have been processed by a back-propagation artificial neural net. Average error of determination of Fe(II) and Fe(III) is about 20 %, of uranium(VI) - 40 %. It was found that sensitivity of the sensor array to iron and uranium is irrespective of the chemical form of these species

30 CFR 57.22208 - Auxiliary fans (I-A, II-A, III, and V-A mines).

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Auxiliary fans (I-A, II-A, III, and V-A mines... fans (I-A, II-A, III, and V-A mines). (a) Auxiliary fans, except fans used in shops and other areas... applicable requirements of 30 CFR part 18, and be operated so that recirculation is minimized. Auxiliary fans...

Mixed ligand complexes of some of the rare earths. La(III)-, Pr(III)- or Nd-(III)-CDTA-Hydroxy Acids

Energy Technology Data Exchange (ETDEWEB)

Rana, H S; Tandon, J P [Rajasthan Univ., Jaipur (India). Chemical Labs.

1975-11-01

Biligand complexes of the 1:1 Ln(III)-1,2-diaminocyclohexane-tetraacetic acid (CDTA) chelate with hydroxy acids (where hydroxy acids = salicylic acid (SA); Sulphosalicylic acid (SSA) and 8-hydroxyquinoline-5-sulphonic acid (HQSA)) have been investigated by potentiometric titration. Their formation constants have been calculated (..mu..=0.1M-KNO/sub 3/; and t=30+-1 deg C) as 4.60 +-0.03, 5.46+-0.03, 5.87+-0.05; 3.12+-0.04, 3.95+-0.05, 4.42+-0.07; 2.73+-0.06, 3.45+-0.05 and 3.90+-0.08 for Ln(III)-CDTA-SA,-SSA, and -HQSA respectively (where Ln=La, Pr or Nd). The value of log Ksub(MAB) follows the order: La(III)).

Comparative analysis of the nuclear lens opalescence by the Lens Opacities Classification System III with nuclear density values provided by Oculus Pentacam: a cross-section study using Pentacam Nucleus Staging software.

Science.gov (United States)

Magalhães, Fernanda Pedreira; Costa, Elaine Fiod; Cariello, Angelino Júlio; Rodrigues, Eduardo Buchele; Hofling-Lima, Ana Luisa

2011-01-01

To compare the clinical classification of cataract using the Lens Opacities Classification System (LOCS) III with the mean values of lens density provided by the Pentacam Scheimpflug System in nuclear cataracts. One hundred and one eyes from 101 patients with age-related nuclear cataract were submitted to clinical examination for lens grading score using LOCS III. According to LOCS III, nuclear opalescence was divided in six groups. Patients were evaluated by the Pentacam Scheimpflug System for the mean lens density using the Pentacam lens densitometry program (PLDP), the Pentacam Nucleus Staging (PNS) mean value and the PNS cataract grading score. A positive correlation between the mean values of lens density and LOCS III classification, considering groups 1 to 5, could be noticed with PLDP and PNS mean value. The mean values between the groups were similar using the PLDP and the PNS mean value. However, when the PNS cataract grading score was evaluated, there was low correspondence with LOCS III classification. Pentacam Scheimpflug device offers an objective measure of the lens nuclear density on nuclear cataracts. PLDP and the PNS mean value were both useful to evaluate age-related nuclear cataract up to LOCS III group 5.

Kinetics of Cr(III) and Cr(VI) removal from water by two floating macrophytes.

Science.gov (United States)

Maine, M A; Hadad, H R; Sánchez, G; Caffaratti, S; Pedro, M C

2016-01-01

The aim of this work was to compare Cr(III) and Cr(VI) removal kinetics from water by Pistia stratiotes and Salvinia herzogii. The accumulation in plant tissues and the effects of both Cr forms on plant growth were also evaluated. Plants were exposed to 2 and 6 mg L(-1) of Cr(III) or Cr(VI) during 30 days. At the end of the experiment, Cr(VI) removal percentages were significantly lower than those obtained for Cr(III) for both macrophytes. Cr(III) removal kinetics involved a fast and a slow component. The fast component was primarily responsible for Cr(III) removal while Cr(VI) removal kinetics involved only a slow process. Cr accumulated principally in the roots. In the Cr(VI) treatments a higher translocation from roots to aerial parts than in Cr(III) treatments was observed. Both macrophytes demonstrated a high ability to remove Cr(III) but not Cr(VI). Cr(III) inhibited the growth at the highest studied concentration of both macrophytes while Cr(VI) caused senescence. These results have important implications in the use of constructed wetlands for secondary industrial wastewater treatment. Common primary treatments of effluents containing Cr(VI) consists in its reduction to Cr(III). Cr(III) concentrations in these effluents are normally below the highest studied concentrations in this work.

Welfare Systems and the Management of the Economic Risk of Unemployment: Sweden

DEFF Research Database (Denmark)

Boesby, Dorte; Dahl, Karen Margrethe; Ploug, Niels

Developments on the Swedish Labour Market and in Swedish Labour Market Policy during the 1990s are described. Part I provides a picture of the situation on the Swedish labour market during the first part of the nineties. In Part II developments in the unemployment protection system since 1995...... are presented. This section also includes a description of income packaging and net replacement rates for people receiving unemployment benefits. Finally the overall development of the system during the nineties is assessed and discussed in Part III....

The steam generator programme of PISC III

International Nuclear Information System (INIS)

Birac, C.; Herkenrath, H.

1990-12-01

The PISC III Actions are intended to extend the results and methodologies of the previous PISC excercises, i.e. the validation of the capabilities of the various examination techniques when used on real defects in real components under real conditions of inspection. Being aware of the important safety role that steam generator tubes play as barrier between primary and secondary cooling system and of the industrial problems that the degradation of these tubes can create, the PISC III Management Board agreed to include in the PISC III Programme a special Action on Steam Generator Tubes Testing (SGT). It was decided to organize the programme in three phases, including Round Robin Tests (RRT): - capability tests on loose tubes, - capability tests on transportable mock-ups, - reliability tests on fixed mock-ups including some interesting SURRY tubes

Detergent Isolation Stabilizes and Activates the Shigella Type III Secretion System Translocator Protein IpaC.

Science.gov (United States)

Bernard, Abram R; Duarte, Shari M; Kumar, Prashant; Dickenson, Nicholas E

2016-07-01

Shigella rely on a type III secretion system as the primary virulence factor for invasion and colonization of human hosts. Although there are an estimated 90 million Shigella infections, annually responsible for more than 100,000 deaths worldwide, challenges isolating and stabilizing many type III secretion system proteins have prevented a full understanding of the Shigella invasion mechanism and additionally slowed progress toward a much needed Shigella vaccine. Here, we show that the non-denaturing zwitterionic detergent N, N-dimethyldodecylamine N-oxide (LDAO) and non-ionic detergent n-octyl-oligo-oxyethylene efficiently isolated the hydrophobic Shigella translocator protein IpaC from the co-purified IpaC/IpgC chaperone-bound complex. Both detergents resulted in monomeric IpaC that exhibits strong membrane binding and lysis characteristics while the chaperone-bound complex does not, suggesting that the stabilizing detergents provide a means of following IpaC "activation" in vitro. Additionally, biophysical characterization found that LDAO provides significant thermal and temporal stability to IpaC, protecting it for several days at room temperature and brief exposure to temperatures reaching 90°C. In summary, this work identified and characterized conditions that provide stable, membrane active IpaC, providing insight into key interactions with membranes and laying a strong foundation for future vaccine formulation studies taking advantage of the native immunogenicity of IpaC and the stability provided by LDAO. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Fate of circulating amino-terminal propeptide of type III procollagen in conscious pigs

DEFF Research Database (Denmark)

Jensen, L T; Henriksen, Jens Henrik Sahl; Risteli, J

1993-01-01

The amino-terminal propeptide of type III procollagen (PIIINP, M(r) 42,000) is a promising marker for the formation of type III collagen of granulation tissue in experimental and clinical studies. The disposal kinetics of circulating PIIINP is, however, almost unknown. In conscious pigs with a th......The amino-terminal propeptide of type III procollagen (PIIINP, M(r) 42,000) is a promising marker for the formation of type III collagen of granulation tissue in experimental and clinical studies. The disposal kinetics of circulating PIIINP is, however, almost unknown. In conscious pigs...... of the plasma disappearance curve originated from the formation and disappearance of a high and a low molecular weight (MW) fraction as part of the degradation of PIIINP. The high MW fraction (approximately M(r) 90,000) was similar to a previously described, but not further characterized, PIIINP immunoreactive...

Valoración psicológica en delitos de violencia de género mediante el Inventario Clínico y Multiaxial de Millon III (MCMI-III

Directory of Open Access Journals (Sweden)

Alicia Ballester

2014-01-01

Full Text Available Se pretende valorar el estado psicológico de 127 mujeres que denuncian maltrato por parte de su expareja, y de 55 hombres denunciados, a través del MCMI-III, analizando asimismo la influencia de las variables sociodemográficas y del maltrato sobre las puntuaciones del MCMI-III. Las mujeres presentan edad media de 36.25 años (DT = 10.48, y los varones 42.54 años (DT = 12.93. Ambos grupos fueron remitidos al Instituto de Medicina Legal de una provincia española por parte del Juzgado de Violencia sobre la Mujer. Se les administró el MCMI-III, obteniendo perfiles característicos en función de la edad, duración del maltrato y años de convivencia. Las mujeres obtienen puntuaciones altas en deseabilidad social, personalidad compulsiva, ansiedad, distimia, somatomorfo y depresión. Los varones presentan rasgos narcisistas, depresión y dependencia de sustancias. A mayor duración del maltrato aumentan en las mujeres las puntuaciones en personalidad esquizoide, depresiva y autodestructiva, junto a distimia y estrés postraumático, con puntuaciones más bajas en deseabilidad social e histrionismo.

Cierny-Mader Type III chronic osteomyelitis: the results of patients treated with debridement, irrigation, vancomycin beads and systemic antibiotics

Science.gov (United States)

Karaduman, Mert

2007-01-01

Cierny-Mader (C-M) Type III osteomyelitis is defined as a localised lesion with both medullary and cortical involvement that is stable mechanically after debridement. The treatment of C-M Type III osteomyelitisis is difficult and requires a precise protocol to achieve a disease-free long-term follow-up. We report here the results of our study on 26 patients (19 men and 7 women; average age: 34.7 years) with C-M Type III osteomylelitis who were treated with radical debridement, irrigation, vancomycin-impregnated custom-made beads and culture-specific systemic antibiotics. Those patients with metaphyseal involvement were treated with deroofing of the cortex and debridement by means of a “trough” (16 patients); those with diaphyseal involvement were treated with both intramedullary reaming and debridement from a trough (ten patients). Antibiotic cement rods were used as an additional therapy in five patients with diaphyseal involvement. Recurrence developed in three patients and was attributed to inadequate debridement; all three patients were treated again in the same manner with success. The mean follow-up is currently 3.6 years (range: 2–6 years). All of the patients have normal clinical, radiographic and laboratory parameters, and all are ambulatory and have returned to their pretreatment level of activity or better. We conclude that C-M Type III chronic osteomyelitis can be safely treated with this protocol. PMID:17375299

Biochemical and Structural Properties of Mouse Kynurenine Aminotransferase III

Energy Technology Data Exchange (ETDEWEB)

Han, Q.; Robinson, H; Cai, T; Tagle, D; Li, J

2009-01-01

Kynurenine aminotransferase III (KAT III) has been considered to be involved in the production of mammalian brain kynurenic acid (KYNA), which plays an important role in protecting neurons from overstimulation by excitatory neurotransmitters. The enzyme was identified based on its high sequence identity with mammalian KAT I, but its activity toward kynurenine and its structural characteristics have not been established. In this study, the biochemical and structural properties of mouse KAT III (mKAT III) were determined. Specifically, mKAT III cDNA was amplified from a mouse brain cDNA library, and its recombinant protein was expressed in an insect cell protein expression system. We established that mKAT III is able to efficiently catalyze the transamination of kynurenine to KYNA and has optimum activity at relatively basic conditions of around pH 9.0 and at relatively high temperatures of 50 to 60C. In addition, mKAT III is active toward a number of other amino acids. Its activity toward kynurenine is significantly decreased in the presence of methionine, histidine, glutamine, leucine, cysteine, and 3-hydroxykynurenine. Through macromolecular crystallography, we determined the mKAT III crystal structure and its structures in complex with kynurenine and glutamine. Structural analysis revealed the overall architecture of mKAT III and its cofactor binding site and active center residues. This is the first report concerning the biochemical characteristics and crystal structures of KAT III enzymes and provides a basis toward understanding the overall physiological role of mammalian KAT III in vivo and insight into regulating the levels of endogenous KYNA through modulation of the enzyme in the mouse brain.

VTT ENIGMA Calculations for FUMEX-III CRP

International Nuclear Information System (INIS)

Tulkki, Ville

2013-01-01

International Atomic Energy Agency IAEA has initiated a string of Coordinated Research Programmes (CRPs) to enhance co-operation between fuel modellers. One of these CRPs, FUMEX-III, was ongoing during 2008 - 2011 and has provided material and incentive for assessment of the fuel codes. This report presents the Finnish FUMEX-III simulations performed with the VTT-modified ENIGMA v5.9b. The work has been done as a part of SAFIR2010 (SAfety of FInnish Reactors 2010) project POKEVA (years 2008 to 2010) and SAFIR2014 project PALAMA (year 2011). VTT Technical Research Centre of Finland received ENIGMA v5.9b from Nuclear Electric plc of the UK in 1992. Internal development has been on-going since then. 'ENIGMA v5.9b with VTT modifications' (from now on, 'ENIGMA' for short) is a separate and different program from British Energy's ENIGMA 5.14 and UK National Nuclear Laboratory's ENIGMA-B. The FUMEX-III work has been performed in tandem of VTT's internal review work attempting to catalogue the changes done since 1992 and to assess the current state of the code. Several individual internal reports detail the changes made and the individual model assessments done during the years. (author)

Antithrombin III in animal models of sepsis and organ failure.

Science.gov (United States)

Dickneite, G

1998-01-01

Antithrombin III (AT III) is the physiological inhibitor of thrombin and other serine proteases of the clotting cascade. In the development of sepsis, septic shock and organ failure, the plasma levels of AT III decrease considerably, suggesting the concept of a substitution therapy with the inhibitor. A decrease of AT III plasma levels might also be associated with other pathological disorders like trauma, burns, pancreatitis or preclampsia. Activation of coagulation and consumption of AT III is the consequence of a generalized inflammation called SIRS (systemic inflammatory response syndrome). The clotting cascade is also frequently activated after organ transplantation, especially if organs are grafted between different species (xenotransplantation). During the past years AT III has been investigated in numerous corresponding disease models in different animal species which will be reviewed here. The bulk of evidence suggests, that AT III substitution reduces morbidity and mortality in the diseased animals. While gaining more experience with AT III, the concept of substitution therapy to maximal baseline plasma levels (100%) appears to become insufficient. Evidence from clinical and preclinical studies now suggests to adjust the AT III plasma levels to about 200%, i.e., doubling the normal value. During the last few years several authors proposed that AT III might not only be an anti-thrombotic agent, but to have in addition an anti-inflammatory effect.

Synthesis and crystal structure of three new quaternary compounds in the system (Cu-III-Se{sub 2}){sub 1-x}ZnSe{sub x} (III = Al, Ga, In), formed by Zn incorporation in Cu-III-Se{sub 2} chalcopyrite s

Energy Technology Data Exchange (ETDEWEB)

Delgado, G. E. [Universidad de Los Andes, Facultad de Ciencias, Departamento de Quimica, Laboratorio de Cristalografia, 5101 Merida (Venezuela, Bolivarian Republic of); Grima G, P.; Quintero, M., E-mail: gerzon@ula.ve [Universidad de Los Andes, Facultad de Ciencias, Departamento de Fisica, Centro de Estudios de Semiconductores, 5101 Merida (Venezuela, Bolivarian Republic of)

2016-11-01

The crystal structure of the chalcogenide alloys CuZnAlSe{sub 3}, CuZnCaSe{sub 3} and CuZnInSe{sub 3}, new members of the system I-II-III-VI{sub 3}, were characterized using X-ray powder diffraction data. All materials crystallize in the tetragonal space group P{sub -4} 2{sub c} (N 112) with a CuFeInSe{sub 3}- type structure. (Author)

Treatment of As(V) and As(III) by electrocoagulation using Al and Fe electrode.

Science.gov (United States)

Kuan, W H; Hu, C Y; Chiang, M C

2009-01-01

A batch electrocoagulation (EC) process with bipolar electrode and potentiodynamic polarization tests with monopolar systems were investigated as methods to explore the effects of electrode materials and initial solution pH on the As(V) and As(III) removal. The results displayed that the system with Al electrode has higher reaction rate during the initial period from 0 to 25 minutes than that of Fe electrode for alkaline condition. The pH increased with the EC time because the As(V) and As(III) removal by either co-precipitation or adsorption resulted in that the OH positions in Al-hydroxide or Fe-hydroxide were substituted by As(V) and As(III). The pH in Fe electrode system elevate higher than that in Al electrode because the As(V) removal substitutes more OH position in Fe-hydroxide than that in Al-hydroxide. EC system with Fe electrode can successfully remove the As(III) but system with Al electrode cannot because As(III) can strongly bind to the surface of Fe-hydroxide with forming inner-sphere species but weakly adsorb to the Al-hydroxide surface with forming outer-sphere species. The acidic solution can destroy the deposited hydroxide passive film then allow the metallic ions liberate into the solution, therefore, the acidic initial solution can enhance the As(V) and As(III) removal. The over potential calculation and potentiodynamic polarization tests reveal that the Fe electrode systems possess higher over potential and pitting potential than that of Al electrode system due to the fast hydrolysis of and the occurrence of Fe-hydroxide passive film.

Systems Engineering Management Procedures

Science.gov (United States)

1966-03-10

hls -iii-rit. -miiiirme 4 --tandnirdized hle iil*ri oa;iu ’ -enperfrm)a- -yýfefi ~lall uitm l--im eniai~ atar n which will lumPremiiieuiea -. v-imli m...with standard component/part selection. and de- tile total system requirements stated in the Sys- tailed functional and physical interfaces: eval- tern...system survivability requirAent. As physical , interface, time, environment, use of these facility requirements are bei developed, standard perts; and

Enhanced fluorescence of Tb(III), Dy(III) perchlorate by salicylic acid in bis(benzoylmethyl) sulfoxide complexes and luminescence mechanism

International Nuclear Information System (INIS)

Li Wenxian; Zheng Yushan; Sun Xiaojun; Chai Wenjuan; Ren Tie; Shi Xiaoyan

2010-01-01

Two novel ternary rare earth perchlorate complexes had been synthesized by using bis(benzoylmethyl) sulfoxide as first ligand (L=C 6 H 5 COCH 2 SOCH 2 COC 6 H 5 ), salicylic acid as second ligand (L ' =C 6 H 4 OHCOO - ). The compounds were characterized by elemental analysis, TG-DSC and molar conductivities in DMF solution. The composition was suggested as [REL 5 L'](ClO 4 ) 2 .nH 2 O (RE=Tb, Dy; n=6, 8 ). Based on IR, 1 HNMR and UV spectra, it showed that the first ligand, bis(benzoylmethyl) sulfoxide (L), bonded with Tb(III), Dy(III) ions by the oxygen atom of sulfinyl group. The second ligand, salicylic acid group (L'), not only bonded with RE(III) ions by one oxygen atom of carboxyl group but also bonded with RE(III) ions by oxygen atom of phenolic hydroxyl group. In bis(benzoylmethyl) sulfoxide system, fluorescent spectra of the complexes showed that the luminescence of Tb(III), Dy(III) ions was enhanced by the second ligand salicylic acid. The ternary complexes had stronger fluorescence than the binary ones where only bis(benzoylmethyl) sulfoxide acted as ligand. Phosphorescent spectra of the two ligands indicated that the coordination of salicylic acid resulted in the matching extent increasing between the triplet state of ligand and excited state of the rare earths. The relationship between fluorescence lifetime and fluorescence intensity was also discussed.

Multiculturalism, Medicine, and Health Part III: Health Beliefs

OpenAIRE

Masi, Ralph

1988-01-01

Supernatural beliefs relate to a Power or powers considered beyond nature. Persons who wish to draw upon the power of supernatural forces often attempt to do so through prayers, ceremonies, or special acknowledgement. While some physicians feel uncomfortable at times with beliefs that differ from their own, the chaplaincy system, in place in most hospitals, is evidence that health-care systems can comfortably accommodate supernatural beliefs. We must make an effort to understand and accommoda...

The role of the enzyme alpha-amylase in binding of An(III)/Ln(III) by oral ingestion

Energy Technology Data Exchange (ETDEWEB)

Barkleit, A.; Bernhard, G. [Institute of Resource Ecology, Helmholtz-Zentrum Dresden-Rossendorf, P.O. Box 510119, 01314 Dresden (Germany); Division of Radiochemistry and Resource Ecology, Technische Universitaet Dresden, 01062 Dresden (Germany); Heller, A. [Institute of Resource Ecology, Helmholtz-Zentrum Dresden-Rossendorf, P.O. Box 510119, 01314 Dresden (Germany)

2014-07-01

In case of incorporation, radionuclides represent a serious health risk to humans due to their (radio-)toxicity. Thus, the determination of their speciation and transport on a molecular level is crucial for the understanding of the transport, metabolism, deposition and elimination in the human organisms. In case of oral ingestion of contaminated food or radioactive substances the first contact medium in the mouth is the aqueous bio-fluid saliva which contains inorganic ions (mainly Na{sup +}, K{sup +}, Ca{sup 2+}, Cl{sup -}, CO{sub 3}{sup 2-}, PO{sub 4}{sup 3-}) and numerous biomolecules, mainly proteins. One of the major proteins in saliva is the digestive enzyme α-amylase which catalyzes the hydrolysis of the α-1,4 glycosidic linkages of polysaccharides like starch or glycogen. [1] In this study the speciation of curium(III) and europium(III) in saliva as the first contact medium at oral incorporation was investigated with time-resolved laser-induced fluorescence spectroscopy (TRLFS). For TRLFS measurements, fresh saliva samples from human sources have been spiked in vitro with Eu(III) or Cm(III). The identification of the dominant species was achieved by a comparison of the spectroscopic data with reference spectra obtained from synthetic saliva and the main single components of the bio-fluid. In the pH range from 6.8 to 7.4 similar spectra were obtained. With respect to reference data, the spectra indicate the formation of a ternary metal complex containing phosphate and carbonate anions and, in addition, a coordination of organic matter, namely α-amylase, to the central metal cation is suggested. To get more information about the binding behavior of α-amylase various investigations with Eu(III) as inactive analog for An(III) were carried out with porcine pancreatic α-amylase (PPA) which serves as model system for various α-amylase species. Sorption experiments showed a high affinity of Eu(III) to α-amylase in a wide pH range, namely between pH 4 and 8

Polarographic determination of stability constants of Eu(III) complexes with acrylic and crotonic acid

Energy Technology Data Exchange (ETDEWEB)

Rao, A L.J.; Singh, Makhan [Punjabi Univ., Patiala (India). Dept. of Chemistry

1979-07-01

Compositions and formation constants of Eu(III) complexes with acrylic acid and crotonic acid have been studied polarographically. The reductions are reversible and diffusion-controlled. The plot of Esub(1/2) versus--log Csub(x) is linear in the case of Eu(III)-acrylic acid system. The change in number of ligands bound to europium during reduction was found to be approximately 1 and ratio of dissociation constants of Eu(III) and Eu(II) was found to be 40.76X10sup(-2). In the case of Eu(III)-crotonic acid system, composition and formation constants have been calculated by the method of Deford and Hume. Crotonic acid forms two complex species with europium (..beta../sub 1/,60; ..beta../sub 2/, 4.2x10sup(+2)). The percentage distribution of various complex species as a function of ligand concentration has been calculated in the case of Eu(III)-crotonic acid system. A polarographic method for the determination of micro amounts of Eu(III) in the presence of diverse ions has been developed. Under optimum conditions Eu(III) in the concentration range 4x19sup(-4)-2x10sup(-2)M can be successfully determined in various mixtures.

Sorption behavior of europium(III) and curium(III) on the cell surfaces of microorganisms

International Nuclear Information System (INIS)

Ozaki, T.; Kimura, T.; Ohnuki, T.; Yoshida, Z.; Gillow, J.B.; Francis, A.J.

2004-01-01

We investigated the association of europium(III) and curium(III) with the microorganisms Chlorella vulgaris, Bacillus subtilis, Pseudomonas fluorescens, Halomonas sp., Halobacterium salinarum, and Halobacterium halobium. We determined the kinetics and distribution coefficients (K d ) for Eu(III) and Cm(III) sorption at pH 3-5 by batch experiments, and evaluated the number of water molecules in the inner-sphere (N H 2 O ) and the degree of strength of ligand field (R E/M ) for Eu(III) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). Exudates from C. vulgaris, Halomonas sp., and H. halobium had an affinity for Eu(III) and Cm(III). The log K d of Eu(III) and Cm(III) showed that their sorption was not fully due to the exchange with three protons on the functional groups on cell surfaces. The halophilic microorganisms (Halomonas sp., Halobacterium salinarum, H. halobium) showed almost no pH dependence in log K d , indicating that an exchange with Na + on the functional groups was involved in their sorption. The ΔN H 2 O (= 9 - N H 2 O ) for Eu(III) on C. vulgaris was 1-3, while that for the other microorganisms was over 3, demonstrating that the coordination of Eu(III) with C. vulgaris was predominantly an outer-spherical process. The R E/M for Eu(III) on halophilic microorganisms was 2.5-5, while that for non-halophilic ones was 1-2.5. This finding suggests that the coordination environment of Eu(III) on the halophilic microorganisms is more complicated than that on the other three non-halophilic ones. (orig.)

Sorption behavior of europium(III) and curium(III) on the cell surfaces of microorganisms

Energy Technology Data Exchange (ETDEWEB)

Ozaki, T.; Kimura, T.; Ohnuki, T.; Yoshida, Z. [Advanced Science Research Center, Japan Atomic Energy Research Inst., Ibaraki (Japan); Gillow, J.B.; Francis, A.J. [Environmental Sciences Dept., Brookhaven National Lab., Upton, NY (United States)

2004-07-01

We investigated the association of europium(III) and curium(III) with the microorganisms Chlorella vulgaris, Bacillus subtilis, Pseudomonas fluorescens, Halomonas sp., Halobacterium salinarum, and Halobacterium halobium. We determined the kinetics and distribution coefficients (K{sub d}) for Eu(III) and Cm(III) sorption at pH 3-5 by batch experiments, and evaluated the number of water molecules in the inner-sphere (N{sub H{sub 2}O}) and the degree of strength of ligand field (R{sub E/M}) for Eu(III) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). Exudates from C. vulgaris, Halomonas sp., and H. halobium had an affinity for Eu(III) and Cm(III). The log K{sub d} of Eu(III) and Cm(III) showed that their sorption was not fully due to the exchange with three protons on the functional groups on cell surfaces. The halophilic microorganisms (Halomonas sp., Halobacterium salinarum, H. halobium) showed almost no pH dependence in log K{sub d}, indicating that an exchange with Na{sup +} on the functional groups was involved in their sorption. The {delta}N{sub H{sub 2}O} (= 9 - N{sub H{sub 2}O}) for Eu(III) on C. vulgaris was 1-3, while that for the other microorganisms was over 3, demonstrating that the coordination of Eu(III) with C. vulgaris was predominantly an outer-spherical process. The R{sub E/M} for Eu(III) on halophilic microorganisms was 2.5-5, while that for non-halophilic ones was 1-2.5. This finding suggests that the coordination environment of Eu(III) on the halophilic microorganisms is more complicated than that on the other three non-halophilic ones. (orig.)

Crystal structure of an iridium(III complex of the [C(dppm2] PCP pincer ligand system and its conjugate CH acid form

Directory of Open Access Journals (Sweden)

Christian Reitsamer

2018-05-01

Full Text Available After the successful creation of the newly designed PCP carbodiphosphorane (CDP ligand [Reitsamer et al. (2012. Dalton Trans. 41, 3503–3514; Stallinger et al. (2007. Chem. Commun. pp. 510–512], the treatment of this PCP pincer system with the transition metal iridium and further the analysis of the structures by single-crystal diffraction and by NMR spectroscopy were of major interest. Two different iridium complexes, namely (bis{[(diphenylphosphanylmethyl]diphenylphosphanylidene}methane-κ3P,C,P′carbonylchloridohydridoiridium(III chloride dichloromethane trisolvate, [IrIII(CO{C(dppm2-κ3P,C,P′}ClH]Cl·3CH2Cl2 (1 and the closely related (bis{[(diphenylphosphanylmethyl]diphenylphosphanylidene}methanide(1+-κ3P,C,P′carbonylchloridohydridoiridium(III dichloride–hydrochloric acid–water (1/2/5.5, [IrIII(CO{CH(dppm2-κ3P,C,P′ClH]Cl}2 (2, have been designed and both complexes show a slightly distorted octahedral coordinated IrIII centre. The PCP pincer ligand system is arranged in a meridional manner, the CO ligand is located trans to the central PCP carbon and a hydride and chloride are located perpendicular above and below the P2C2 plane. With an Ir—CCDP distance of 2.157 (5 Å, an Ir—CO distance of 1.891 (6 Å and a quite short C—O distance of 1.117 (7 Å, complex 1 presents a strong carbonyl bond. Complex 2, the corresponding CH acid of 1, shows an additionally attached proton at the carbodiphosphorane carbon atom located antiperiplanar to the hydride of the metal centre. In comparison with complex 1, the Ir—CCDP distance of 2.207 (3 Å is lengthened and the Ir—C—O values indicate a weaker trans influence of the central carbodiphosphorane carbon atom.

Acoustic Emission Monitoring of Incipient Failure in Journal Bearings( III ) - Development of AE Diagnosis System for Journal Bearings -

International Nuclear Information System (INIS)

Chung, Min Hwa; Cho, Yong Sang; Yoon, Dong Jin; Kwon, Oh Yang

1996-01-01

For the condition monitoring of the journal bearing in rotating machinery, a system for their diagnosis by acoustic emission(AE) was developed. AE has been used to detect abnormal conditions in the bearing system. It was found from the field application study as well as the laboratory experiment using a simulated journal bearing system that AE RMS voltage was the most efficient parameter for the purpose of current study. Based on the above results, algorithms and judgement criteria for the diagnosis system was established. The system is composed of four parts as follows: the sensing part including AE sensor and preamplifier, the signal processing part for RMS-to-DC conversion to measure AE ms voltage, the interface part for transferring RMS voltage data into PC using A/D converter, and the software part including the graphic display of bearing conditions and the diagnosis program

SIMMER-III applications to fuel-coolant interactions

Energy Technology Data Exchange (ETDEWEB)

Morita, K.; Kondo, Sa.; Tobita, Y.; Brear, D.J. [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

1998-01-01

The main purpose of the SIMMER-III code is to provide a numerical simulation of complex multiphase, multicomponent flow problems essential to investigate core disruptive accidents in liquid-metal fast reactors (LMFRs). However, the code is designed to be sufficiently flexible to be applied to a variety of multiphase flows, in addition to LMFR safety issues. In the present study, some typical experiments relating to fuel-coolant interactions (FCIs) have been analyzed by SIMMER-III to demonstrate that the code is applicable to such complex and highly transient multiphase flow situations. It is shown that SIMMER-III can reproduce the premixing phase both in water and sodium systems as well as the propagation of steam explosion. It is thus demonstrated the code is basically capable of simulating integral multiphase thermal-hydraulic problems included in FCI experiments. (author)

RNA and DNA Targeting by a Reconstituted Thermus thermophilus Type III-A CRISPR-Cas System.

Directory of Open Access Journals (Sweden)

Tina Y Liu

Full Text Available CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR-associated systems are RNA-guided adaptive immunity pathways used by bacteria and archaea to defend against phages and plasmids. Type III-A systems use a multisubunit interference complex called Csm, containing Cas proteins and a CRISPR RNA (crRNA to target cognate nucleic acids. The Csm complex is intriguing in that it mediates RNA-guided targeting of both RNA and transcriptionally active DNA, but the mechanism is not well understood. Here, we overexpressed the five components of the Thermus thermophilus (T. thermophilus Type III-A Csm complex (TthCsm with a defined crRNA sequence, and purified intact TthCsm complexes from E. coli cells. The complexes were thermophilic, targeting complementary ssRNA more efficiently at 65°C than at 37°C. Sequence-independent, endonucleolytic cleavage of single-stranded DNA (ssDNA by TthCsm was triggered by recognition of a complementary ssRNA, and required a lack of complementarity between the first 8 nucleotides (5' tag of the crRNA and the 3' flanking region of the ssRNA. Mutation of the histidine-aspartate (HD nuclease domain of the TthCsm subunit, Cas10/Csm1, abolished DNA cleavage. Activation of DNA cleavage was dependent on RNA binding but not cleavage. This leads to a model in which binding of an ssRNA target to the Csm complex would stimulate cleavage of exposed ssDNA in the cell, such as could occur when the RNA polymerase unwinds double-stranded DNA (dsDNA during transcription. Our findings establish an amenable, thermostable system for more in-depth investigation of the targeting mechanism using structural biology methods, such as cryo-electron microscopy and x-ray crystallography.

RNA and DNA Targeting by a Reconstituted Thermus thermophilus Type III-A CRISPR-Cas System.

Science.gov (United States)

Liu, Tina Y; Iavarone, Anthony T; Doudna, Jennifer A

2017-01-01

CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR-associated) systems are RNA-guided adaptive immunity pathways used by bacteria and archaea to defend against phages and plasmids. Type III-A systems use a multisubunit interference complex called Csm, containing Cas proteins and a CRISPR RNA (crRNA) to target cognate nucleic acids. The Csm complex is intriguing in that it mediates RNA-guided targeting of both RNA and transcriptionally active DNA, but the mechanism is not well understood. Here, we overexpressed the five components of the Thermus thermophilus (T. thermophilus) Type III-A Csm complex (TthCsm) with a defined crRNA sequence, and purified intact TthCsm complexes from E. coli cells. The complexes were thermophilic, targeting complementary ssRNA more efficiently at 65°C than at 37°C. Sequence-independent, endonucleolytic cleavage of single-stranded DNA (ssDNA) by TthCsm was triggered by recognition of a complementary ssRNA, and required a lack of complementarity between the first 8 nucleotides (5' tag) of the crRNA and the 3' flanking region of the ssRNA. Mutation of the histidine-aspartate (HD) nuclease domain of the TthCsm subunit, Cas10/Csm1, abolished DNA cleavage. Activation of DNA cleavage was dependent on RNA binding but not cleavage. This leads to a model in which binding of an ssRNA target to the Csm complex would stimulate cleavage of exposed ssDNA in the cell, such as could occur when the RNA polymerase unwinds double-stranded DNA (dsDNA) during transcription. Our findings establish an amenable, thermostable system for more in-depth investigation of the targeting mechanism using structural biology methods, such as cryo-electron microscopy and x-ray crystallography.

Comparative analysis of the nuclear lens opalescence by the Lens Opacities Classification System III with nuclear density values provided by Oculus Pentacam: a cross-section study using Pentacam Nucleus Staging software

Directory of Open Access Journals (Sweden)

Fernanda Pedreira Magalhães

2011-04-01

Full Text Available PURPOSE: To compare the clinical classification of cataract using the Lens Opacities Classification System (LOCS III with the mean values of lens density provided by the Pentacam Scheimpflug System in nuclear cataracts. METHODS: One hundred and one eyes from 101 patients with age-related nuclear cataract were submitted to clinical examination for lens grading score using LOCS III. According to LOCS III, nuclear opalescence was divided in six groups. Patients were evaluated by the Pentacam Scheimpflug System for the mean lens density using the Pentacam lens densitometry program (PLDP, the Pentacam Nucleus Staging (PNS mean value and the PNS cataract grading score. RESULTS: A positive correlation between the mean values of lens density and LOCS III classification, considering groups 1 to 5, could be noticed with PLDP and PNS mean value. The mean values between the groups were similar using the PLDP and the PNS mean value. However, when the PNS cataract grading score was evaluated, there was low correspondence with LOCS III classification. CONCLUSION: Pentacam Scheimpflug device offers an objective measure of the lens nuclear density on nuclear cataracts. PLDP and the PNS mean value were both useful to evaluate age-related nuclear cataract up to LOCS III group 5.

The impact of the fee-for-service reimbursement system on the ...

African Journals Online (AJOL)

The impact of the fee-for-service reimbursement system on the utilisation of health services: Part III. A comparison of caesarean section rates in white nulliparous women in the private and public sectors.

National Energy Board 1992-93 estimates part III expenditure plan

International Nuclear Information System (INIS)

1992-01-01

This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program's financial performance over the past year. The format and organization of the document should be regarded as transitional. For the most part the document is organized to be consistent with the program structure approved for the National Energy Board. 16 figs

National Energy Board 1992-93 estimates part III expenditure plan

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program`s financial performance over the past year. The format and organization of the document should be regarded as transitional. For the most part the document is organized to be consistent with the program structure approved for the National Energy Board. 16 figs.

Enhancement effects of reducing agents on the degradation of tetrachloroethene in the Fe(II)/Fe(III) catalyzed percarbonate system

International Nuclear Information System (INIS)

Miao, Zhouwei; Gu, Xiaogang; Lu, Shuguang; Brusseau, Mark L.; Yan, Ni; Qiu, Zhaofu; Sui, Qian

2015-01-01

Highlights: • PCE degradation by reducing-agent modified Fe-catalyzed percarbonate was studied. • The addition of reducing agents significantly increased PCE degradation. • Hydroxylamine hydrochloride showed the best effect on enhancing PCE degradation. • The primary PCE degradation mechanism was oxidation by hydroxyl radical. • O_2·"− participated in the degradation of PCE in reducing-agent modified system. - Abstract: In this study, the effects of reducing agents on the degradation of tetrachloroethene (PCE) were investigated in the Fe(II)/Fe(III) catalyzed sodium percarbonate (SPC) system. The addition of reducing agents, including hydroxylamine hydrochloride, sodium sulfite, ascorbic acid and sodium ascorbate, accelerated the Fe(III)/Fe(II) redox cycle, leading to a relatively steady Fe(II) concentration and higher production of free radicals. This, in turn, resulted in enhanced PCE oxidation by SPC, with almost complete PCE removal obtained for appropriate Fe and SPC concentrations. The chemical probe tests, using nitrobenzene and carbon tetrachloride, demonstrated that HO· was the predominant radical in the system and that O_2·"− played a minor role, which was further confirmed by the results of electron spin resonance measurements. PCE degradation decreased significantly with the addition of isopropanol, a HO· scavenger, supporting the hypothesis that HO· was primarily responsible for PCE degradation. It is noteworthy that Cl"− release was slightly delayed in the first 20 min, indicating that intermediate products were produced. However, these intermediates were further degraded, resulting in the complete conversion of PCE to CO_2. In conclusion, the use of reducing agents to enhance Fe(II)/Fe(III) catalyzed SPC oxidation appears to be a promising approach for the rapid degradation of organic contaminants in groundwater.

Enhancement effects of reducing agents on the degradation of tetrachloroethene in the Fe(II)/Fe(III) catalyzed percarbonate system

Energy Technology Data Exchange (ETDEWEB)

Miao, Zhouwei [State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, East China University of Science and Technology, Shanghai 200237 (China); Soil, Water and Environmental Science Department, School of Earth and Environmental Sciences, The University of Arizona, 429 Shantz Building, Tucson, AZ 85721 (United States); Gu, Xiaogang [State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, East China University of Science and Technology, Shanghai 200237 (China); Lu, Shuguang, E-mail: lvshuguang@ecust.edu.cn [State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, East China University of Science and Technology, Shanghai 200237 (China); Brusseau, Mark L. [Soil, Water and Environmental Science Department, School of Earth and Environmental Sciences, The University of Arizona, 429 Shantz Building, Tucson, AZ 85721 (United States); Yan, Ni [Hydrology and Water Resources Department, School of Earth and Environmental Sciences, University of Arizona, 429 Shantz Building, Tucson, AZ 85721 (United States); Qiu, Zhaofu; Sui, Qian [State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, East China University of Science and Technology, Shanghai 200237 (China)

2015-12-30

Highlights: • PCE degradation by reducing-agent modified Fe-catalyzed percarbonate was studied. • The addition of reducing agents significantly increased PCE degradation. • Hydroxylamine hydrochloride showed the best effect on enhancing PCE degradation. • The primary PCE degradation mechanism was oxidation by hydroxyl radical. • O{sub 2}·{sup −} participated in the degradation of PCE in reducing-agent modified system. - Abstract: In this study, the effects of reducing agents on the degradation of tetrachloroethene (PCE) were investigated in the Fe(II)/Fe(III) catalyzed sodium percarbonate (SPC) system. The addition of reducing agents, including hydroxylamine hydrochloride, sodium sulfite, ascorbic acid and sodium ascorbate, accelerated the Fe(III)/Fe(II) redox cycle, leading to a relatively steady Fe(II) concentration and higher production of free radicals. This, in turn, resulted in enhanced PCE oxidation by SPC, with almost complete PCE removal obtained for appropriate Fe and SPC concentrations. The chemical probe tests, using nitrobenzene and carbon tetrachloride, demonstrated that HO· was the predominant radical in the system and that O{sub 2}·{sup −} played a minor role, which was further confirmed by the results of electron spin resonance measurements. PCE degradation decreased significantly with the addition of isopropanol, a HO· scavenger, supporting the hypothesis that HO· was primarily responsible for PCE degradation. It is noteworthy that Cl{sup −} release was slightly delayed in the first 20 min, indicating that intermediate products were produced. However, these intermediates were further degraded, resulting in the complete conversion of PCE to CO{sub 2}. In conclusion, the use of reducing agents to enhance Fe(II)/Fe(III) catalyzed SPC oxidation appears to be a promising approach for the rapid degradation of organic contaminants in groundwater.

Transuranium perrhenates: Np(IV), Pu(IV) and (III), Am (III)

International Nuclear Information System (INIS)

Silvestre, Jean-Paul; Freundlich, William; Pages, Monique

1977-01-01

Synthesis in aqueous solution and by solid state reactions, crystallographical characterization and study of the stability of some transuranium perrhenates: Asup(n+)(ReO 4 - )sub(n) (A=Np(IV), Pu(IV), Pu(III), Am(III) [fr

Quantum field theory III. Gauge theory. A bridge between mathematicians and physicists

Energy Technology Data Exchange (ETDEWEB)

Zeidler, Eberhard [Max Planck Institute for Mathematics in the Sciences, Leipzig (Germany)

2011-07-01

In this third volume of his modern introduction to quantum field theory, Eberhard Zeidler examines the mathematical and physical aspects of gauge theory as a principle tool for describing the four fundamental forces which act in the universe: gravitative, electromagnetic, weak interaction and strong interaction. Volume III concentrates on the classical aspects of gauge theory, describing the four fundamental forces by the curvature of appropriate fiber bundles. This must be supplemented by the crucial, but elusive quantization procedure. The book is arranged in four sections, devoted to realizing the universal principle force equals curvature: Part I: The Euclidean Manifold as a Paradigm Part II: Ariadne's Thread in Gauge Theory Part III: Einstein's Theory of Special Relativity Part IV: Ariadne's Thread in Cohomology For students of mathematics the book is designed to demonstrate that detailed knowledge of the physical background helps to reveal interesting interrelationships among diverse mathematical topics. Physics students will be exposed to a fairly advanced mathematics, beyond the level covered in the typical physics curriculum. Quantum Field Theory builds a bridge between mathematicians and physicists, based on challenging questions about the fundamental forces in the universe (macrocosmos), and in the world of elementary particles (microcosmos). (orig.)

INTERACTION MODE BETWEEN METHYLENE BLUE-Sm(III ...

African Journals Online (AJOL)

Preferred Customer

between methylene blue (MB)-Sm(III) complex and herring sperm DNA by using acridine orange .... the complex was recorded as KBr pellets on Spectrum One FTIR system (PE Company, USA), ..... mechanism of drugs and drug design.

Estimation development cost, study case: Quality Management System Reactor TRIGA Mark III

International Nuclear Information System (INIS)

Antúnez Barbosa, Tereso Antonio; Valdovinos Rosas, Rosa María; Marcial Romero, José Raymundo; Ramos Corchado, Marco Antonio; Edgar Herrera Arriaga

2016-01-01

The process of estimating costs in software engineering is not a simple task, it must be addressed carefully to obtain an efficient strategy to solve problems associated with the effort, cost and time of activities that are performed in the development of an information system project. In this context the main goal for both developers and customers is the cost, since developers are worry about the effort pay-load and customers are worry about the product pay-load. However, in other fields the cost of goods depends on the activity or process that is performed, thereby deduce that the main cost of the final product of a development project software project is undoubtedly its size. In this paper a comparative study of common models for estimating costs are developed. These models are used today in order to create a structured analysis to provide the necessary information about cost, time and effort for making decisions in a software development project. Finally the models are applied to a case study, which is a system called Monitorizacion Automatica del Sistema de Gestion de Calidad del Reactor TRIGA Mark III. (author)

Safety analysis of RA reactor operation, I-II, Part I - RA reactor technical and operation characteristics; Analiza sigurnosti rada reaktora RA - I-III, I deo - Tehnicke i pogonske karakteristike reaktora RA

Energy Technology Data Exchange (ETDEWEB)

Raisic, N [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1963-02-15

RA research reactor is a thermal, heavy water moderated system with graphite reflector having nominal power 6.5 MW. The 2% enriched metal uranium fuel in the reactor core produces mean thermal neutron flux of 2.9 10{sup 13} neutrons/cm{sup 2} s, and maximum neutron flux 5.5 10{sup 13} neutrons/cm{sup 2} s. main components of the reactor described in this report are: rector core, reflector, biological shield, heavy water cooling system, ordinary water cooling system, helium system, reactor control system, reactor safety system, dosimetry system, power supply system, and fuel transport system. Detailed reactor properties and engineering drawings of all the system are part of this volume.

Structural systematics of rare earth complexes. III. Structural characterization of lanthanoid (III) picrate hydrates: gadolinium picrate dodecahydrate - an x-ray-induced phase modifications? - and some general aspects of structural chemistry of lanthanoid picrates

International Nuclear Information System (INIS)

Harrowfield, J.M.; Weimin, Lu; Brian, W.S.; White, A.H.

1994-01-01

In the course of the previous studies (Parts I and II), an unusual result was observed in the case of the structure determination of hydrated gadolinium(III) picrate. Midway through data collection, the monoclinic P2 1 /c phase modification (X-ray-induced?) to a similar cell more nearly resembling that of the La→Pr structure type recorded previously, with no loss of crystal integrity, and with useful data sets being obtained on both forms. Redetermination of the structure with a fresh sample yielded no reproduction of the anomaly. These results are recorded and discussed, together with an overview of the consequences of the data of Parts I-III in relation to those of other literature in the field. 13 refs., 4 tabs., 1 fig