WorldWideScience

Sample records for system development analysis

  1. System analysis: Developing tools for the future

    Energy Technology Data Exchange (ETDEWEB)

    De Jong, K.; clever, J.; Draper, J.V.; Davies, B.; Lonks, A.

    1996-02-01

    This report introduces and evaluates system analysis tools that were developed, or are under development, for the Robotics Technology Development Program (RTDP). Additionally, it discusses system analysis work completed using these tools aimed at completing a system analysis of the retrieval of waste from underground storage tanks on the Hanford Reservation near Richland, Washington. The tools developed and evaluated include a mixture of commercially available tools adapted to RTDP requirements, and some tools developed in house. The tools that are included in this report include: a Process Diagramming Tool, a Cost Modeling Tool, an Amortization Modeling Tool, a graphical simulation linked to the Cost Modeling Tool, a decision assistance tool, and a system thinking tool. Additionally, the importance of performance testing to the RTDP and the results of such testing executed is discussed. Further, the results of the Tank Waste Retrieval (TWR) System Diagram, the TWR Operations Cost Model, and the TWR Amortization Model are presented, and the implication of the results are discussed. Finally, the RTDP system analysis tools are assessed and some recommendations are made regarding continuing development of the tools and process.

  2. Counter Trafficking System Development "Analysis Training Program"

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Dennis C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2010-12-01

    This document will detail the training curriculum for the Counter-Trafficking System Development (CTSD) Analysis Modules and Lesson Plans are derived from the United States Military, Department of Energy doctrine and Lawrence Livermore National Laboratory (LLNL), Global Security (GS) S Program.

  3. Development of cost-benefit analysis system

    International Nuclear Information System (INIS)

    Shiba, Tsuyoshi; Mishima, Tetsuya; Yuyama, Tomonori; Suzuki, Atsushi

    2001-01-01

    In order to promote the FDR development, it is necessary to see various benefits brought by introduction of FBR from multiple perspectives and have a good grasp of such benefits quantitatively and an adequate R and D investment scale which corresponds with them. In this study, the structured prototype in the previous study was improved to be able to perform cost-benefit analysis. An example of improvement made in the system is addition of subroutine used for comparison between new energy and benefits brought by introduction of FBR with special emphasis on addition of logic for analyzing externality about the new energy. Other improvement examples are modification of the Conventional Year Expense Ratio method of power generation cost to Average Durable Year Cost method, addition of database function and turning input data into database, and reviewing idea on cost by the type of waste material and price of uranium. The cost-benefit analysis system was also restructured utilizing Microsoft ACCESS so that it should have a data base function. As the result of the improvement mentioned above, we expect that the improved cost-benefit analysis system will have higher generality than the system before; therefore, great deal of benefits brought by application of the system in the future is expected. (author)

  4. Analysis within the systems development life-cycle

    CERN Document Server

    Rock-Evans, Rosemary

    1987-01-01

    Analysis within the Systems Development Life-Cycle: Book 2, Data Analysis-The Methods describes the methods for carrying out data analysis within the systems development life-cycle and demonstrates how the results of fact gathering can be used to produce and verify the analysis deliverables. A number of alternative methods of analysis other than normalization are suggested. Comprised of seven chapters, this book shows the tasks to be carried out in the logical order of progression-preparation, collection, analysis of the existing system (which comprises the tasks of synthesis, verification, an

  5. Development and analysis of SRIC harvesting systems

    Energy Technology Data Exchange (ETDEWEB)

    Stokes, B.J. [Southern Forest Experiment Station, Auburn, AL (United States); Hartsough, B.R. [Univ. of California, Davis, CA (United States)

    1993-12-31

    This paper reviews several machine combinations for harvesting short-rotation, intensive-culture (SRIC) plantations. Productivity and cost information for individual machines was obtained from published sources. Three felling and skidding systems were analyzed for two stands, a 7.6-cm (3-in) average d.b.h. sycamore and a 15.2-cm (6-in) average d.b.h. eucalyptus. The analyses assumed that whole trees were chipped at roadside. Costs and production were summarized for each system. The systems were: (1) Continuous-travel feller-buncher, skidder, and chipper; (2) 3-wheel feller-buncher, skidder, and chipper; (3) chainsaw, skidder, and chipper. In the 7.6-cm stand, system productivities were 9.9, 7.3, and 7.5 BDLT/SMH, and costs were $20.9, $20.8, and $18.0 per BDLT for the three systems, respectively. System production rates for the 15.2-cm stand were 24.3, 10.2, and 12.5 BDLT/SMH, and costs were $8.7, $10.9, and $13.2 for systems 1, 2 and 3, respectively.

  6. Bistatic radar system analysis and software development

    OpenAIRE

    Teo, Ching Leong

    2003-01-01

    Approved for public release, distribution is unlimited Bistatic radar has some properties that are distinctly different from monostatic radar. Recently bistatic radar has received attention for its potential to detect stealth targets due to enhanced target forward scatter. Furthermore, the feasibility of hitchhiker radar has been demonstrated, which allows passive radar receivers to detect and track targets. This thesis developed a software simulation package in Matlab that provides a conv...

  7. Development of HANARO Activation Analysis System and Utilization Technology

    International Nuclear Information System (INIS)

    Chung, Y. S.; Moon, J. H.; Cho, H. J.

    2007-06-01

    1. Establishment of evaluation system using a data for a neutron activation analysis : Improvement of NAA measurement system and its identification, Development of combined data evaluation code of NAA/PGAA, International technical cooperation project 2. Development of technique for a industrial application of high precision gamma nuclide spectroscopic analysis : Analytical quality control, Development of industrial application techniques and its identification 3. Industrial application research for a prompt gamma-ray activation analysis : Improvement of Compton suppression counting system (PGAA), Development of applied technology using a PGAA system 4. Establishment of NAA user supporting system and KOLAS management : Development and validation of KOLAS/ISO accreditation testing and identification method, Cooperation researches for a industrial application, Establishment of integrated user analytical supporting system, Accomplishment of sample irradiation facility

  8. Development of HANARO Activation Analysis System and Utilization Technology

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Y. S.; Moon, J. H.; Cho, H. J. (and others)

    2007-06-15

    1. Establishment of evaluation system using a data for a neutron activation analysis : Improvement of NAA measurement system and its identification, Development of combined data evaluation code of NAA/PGAA, International technical cooperation project 2. Development of technique for a industrial application of high precision gamma nuclide spectroscopic analysis : Analytical quality control, Development of industrial application techniques and its identification 3. Industrial application research for a prompt gamma-ray activation analysis : Improvement of Compton suppression counting system (PGAA), Development of applied technology using a PGAA system 4. Establishment of NAA user supporting system and KOLAS management : Development and validation of KOLAS/ISO accreditation testing and identification method, Cooperation researches for a industrial application, Establishment of integrated user analytical supporting system, Accomplishment of sample irradiation facility.

  9. Analysis within the systems development life-cycle

    CERN Document Server

    Rock-Evans, Rosemary

    1987-01-01

    Analysis within the Systems Development Life-Cycle: Book 1, Data Analysis-The Deliverables provides a comprehensive treatment of data analysis within the systems development life-cycle and all the deliverables that need to be collected in analysis. The purpose of deliverables is explained and a number of alternative ways of collecting them are discussed. This book is comprised of five chapters and begins with an overview of what """"analysis"""" actually means, with particular reference to tasks such as hardware planning and software evaluation and where they fit into the overall cycle. The ne

  10. Analysis within the systems development life-cycle

    CERN Document Server

    Rock-Evans, Rosemary

    1987-01-01

    Analysis within the Systems Development Life-Cycle: Book 4, Activity Analysis-The Methods describes the techniques and concepts for carrying out activity analysis within the systems development life-cycle. Reference is made to the deliverables of data analysis and more than one method of analysis, each a viable alternative to the other, are discussed. The """"bottom-up"""" and """"top-down"""" methods are highlighted. Comprised of seven chapters, this book illustrates how dependent data and activities are on each other. This point is especially brought home when the task of inventing new busin

  11. Project development and commercialization of on-line analysis systems

    International Nuclear Information System (INIS)

    Watt, J.S.

    1997-01-01

    A project team first in the Australian Atomic Energy Commission (AAEC) and since 1982 in CSIRO has developed many on-line analysis systems for the mineral and energy industries. The development of these projects has followed a common pattern of laboratory R and D, field trials, commercialisation and technology transfer. This successful pattern is illustrated using examples of the development of systems for the on-line analysis of mineral slurries, for determination of the ash content of coal on conveyors, and for determination of the flow rates of oil, water and gas in pipelines. The first two systems are licensed to Australian companies, Amdel Ltd and Mineral Control Instrumentation Ltd. Both systems are used by industry worldwide, and are the market leaders for radioisotope gauges in their application field. The third system, the multiphase flow meter, was licensed in 1997 to Kvaerner FSSL Ltd of Aberdeen. This meter has even greater potential than the other two systems for economic benefit from its used and for numbers of installations. The on-line analysis systems have been developed to increase the productivity of the Australian mineral and energy industries, and to provide economic benefit to Australia. The economic benefit sought is predominantly improved process control based on use of the instrument, rather than from its sale. Sales of instruments are significant, however, with about A$80 million from the analysis systems and their derivatives since the 1970s. Some of the issues associated with the development of the on-line analysis system are outlined

  12. The environment power system analysis tool development program

    Science.gov (United States)

    Jongeward, Gary A.; Kuharski, Robert A.; Kennedy, Eric M.; Stevens, N. John; Putnam, Rand M.; Roche, James C.; Wilcox, Katherine G.

    1990-01-01

    The Environment Power System Analysis Tool (EPSAT) is being developed to provide space power system design engineers with an analysis tool for determining system performance of power systems in both naturally occurring and self-induced environments. The program is producing an easy to use computer aided engineering (CAE) tool general enough to provide a vehicle for technology transfer from space scientists and engineers to power system design engineers. The results of the project after two years of a three year development program are given. The EPSAT approach separates the CAE tool into three distinct functional units: a modern user interface to present information, a data dictionary interpreter to coordinate analysis; and a data base for storing system designs and results of analysis.

  13. Analysis within the systems development life-cycle

    CERN Document Server

    Rock-Evans, Rosemary

    1987-01-01

    Analysis within the Systems Development Life-Cycle, Book 3: Activity Analysis - The Deliverables provides a comprehensive coverage of the deliverables of activity analysis. The book also details purpose of each deliverable in the context of the next tasks in the systems development cycle (SDC). The text first covers the concept of deliverables and the benefits of making deliverables visible. In the second chapter, the book introduces the main concepts and diagrammatic techniques of activity analysis. The third chapter deals with the important classes or categories of concept, while the fourth

  14. Risk Interfaces to Support Integrated Systems Analysis and Development

    Science.gov (United States)

    Mindock, Jennifer; Lumpkins, Sarah; Shelhamer, Mark; Anton, Wilma; Havenhill, Maria

    2016-01-01

    Objectives for systems analysis capability: Develop integrated understanding of how a complex human physiological-socio-technical mission system behaves in spaceflight. Why? Support development of integrated solutions that prevent unwanted outcomes (Implementable approaches to minimize mission resources(mass, power, crew time, etc.)); Support development of tools for autonomy (need for exploration) (Assess and maintain resilience -individuals, teams, integrated system). Output of this exercise: -Representation of interfaces based on Human System Risk Board (HSRB) Risk Summary information and simple status based on Human Research Roadmap; Consolidated HSRB information applied to support communication; Point-of-Departure for HRP Element planning; Ability to track and communicate status of collaborations. 4

  15. Development of design and analysis software for advanced nuclear system

    International Nuclear Information System (INIS)

    Wu Yican; Hu Liqin; Long Pengcheng; Luo Yuetong; Li Yazhou; Zeng Qin; Lu Lei; Zhang Junjun; Zou Jun; Xu Dezheng; Bai Yunqing; Zhou Tao; Chen Hongli; Peng Lei; Song Yong; Huang Qunying

    2010-01-01

    A series of professional codes, which are necessary software tools and data libraries for advanced nuclear system design and analysis, were developed by the FDS Team, including the codes of automatic modeling, physics and engineering calculation, virtual simulation and visualization, system engineering and safety analysis and the related database management etc. The development of these software series was proposed as an exercise of development of nuclear informatics. This paper introduced the main functions and key techniques of the software series, as well as some tests and practical applications. (authors)

  16. Development of radar cross section analysis system of naval ships

    Science.gov (United States)

    Kim, Kookhyun; Kim, Jin-Hyeong; Choi, Tae-Muk; Cho, Dae-Seung

    2012-03-01

    A software system for a complex object scattering analysis, named SYSCOS, has been developed for a systematic radar cross section (RCS) analysis and reduction design. The system is based on the high frequency analysis methods of physical optics, geometrical optics, and physical theory of diffraction, which are suitable for RCS analysis of electromagnetically large and complex targets as like naval ships. In addition, a direct scattering center analysis function has been included, which gives relatively simple and intuitive way to discriminate problem areas in design stage when comparing with conventional image-based approaches. In this paper, the theoretical background and the organization of the SYSCOS system are presented. To verify its accuracy and to demonstrate its applicability, numerical analyses for a square plate, a sphere and a cylinder, a weapon system and a virtual naval ship have been carried out, of which results have been compared with analytic solutions and those obtained by the other existing software.

  17. Development of radar cross section analysis system of naval ships

    Directory of Open Access Journals (Sweden)

    Kookhyun Kim

    2012-03-01

    Full Text Available A software system for a complex object scattering analysis, named SYSCOS, has been developed for a systematic radar cross section (RCS analysis and reduction design. The system is based on the high frequency analysis methods of physical optics, geometrical optics, and physical theory of diffraction, which are suitable for RCS analysis of electromagnetically large and complex targets as like naval ships. In addition, a direct scattering center analysis function has been included, which gives relatively simple and intuitive way to discriminate problem areas in design stage when comparing with conventional image-based approaches. In this paper, the theoretical background and the organization of the SYSCOS system are presented. To verify its accuracy and to demonstrate its applicability, numerical analyses for a square plate, a sphere and a cylinder, a weapon system and a virtual naval ship have been carried out, of which results have been compared with analytic solutions and those obtained by the other existing software.

  18. Development of design and safety analysis supporting system for casks

    International Nuclear Information System (INIS)

    Ohsono, Katsunari; Higashino, Akira; Endoh, Shuji

    1993-01-01

    Mitsubishi heavy Industries has developed a design and safety analysis supporting system 'CADDIE' (Cask Computer Aided Design, Drawing and Integrated Evaluation System), with the following objectives: (1) Enhancement of efficiency of the design and safety analysis (2) Further advancement of design quality (3) Response to the diversification of design requirements. The features of this system are as follows: (1) The analysis model data common to analyses is established, and it is prepared automatically from the model made by CAD. (2) The input data for the analysis code is available by simple operation of conversation type from the analysis model data. (3) The analysis results are drawn out in diagrams by output generator, so as to facilitate easy observation. (4) The data of material properties, fuel assembly data, etc. required for the analyses are made available as a data base. (J.P.N.)

  19. Development of realistic thermal hydraulic system analysis code

    International Nuclear Information System (INIS)

    Lee, Won Jae; Chung, B. D; Kim, K. D.

    2002-05-01

    The realistic safety analysis system is essential for nuclear safety research, advanced reactor development, safety analysis in nuclear industry and 'in-house' plant design capability development. In this project, we have developed a best-estimate multi-dimensional thermal-hydraulic system code, MARS, which is based on the integrated version of the RELAP5 and COBRA-TF codes. To improve the realistic analysis capability, we have improved the models for multi-dimensional two-phase flow phenomena and for advanced two-phase flow modeling. In addition, the GUI (Graphic User Interface) feature were developed to enhance the user's convenience. To develop the coupled analysis capability, the MARS code were linked with the three-dimensional reactor kinetics code (MASTER), the core thermal analysis code (COBRA-III/CP), and the best-estimate containment analysis code (CONTEMPT), resulting in MARS/MASTER/COBRA/CONTEMPT. Currently, the MARS code system has been distributed to 18 domestic organizations, including research, industrial, regulatory organizations and universities. The MARS has been being widely used for the safety research of existing PWRs, advanced PWR, CANDU and research reactor, the pre-test analysis of TH experiments, and others

  20. Development of realistic thermal hydraulic system analysis code

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Jae; Chung, B. D; Kim, K. D. [and others

    2002-05-01

    The realistic safety analysis system is essential for nuclear safety research, advanced reactor development, safety analysis in nuclear industry and 'in-house' plant design capability development. In this project, we have developed a best-estimate multi-dimensional thermal-hydraulic system code, MARS, which is based on the integrated version of the RELAP5 and COBRA-TF codes. To improve the realistic analysis capability, we have improved the models for multi-dimensional two-phase flow phenomena and for advanced two-phase flow modeling. In addition, the GUI (Graphic User Interface) feature were developed to enhance the user's convenience. To develop the coupled analysis capability, the MARS code were linked with the three-dimensional reactor kinetics code (MASTER), the core thermal analysis code (COBRA-III/CP), and the best-estimate containment analysis code (CONTEMPT), resulting in MARS/MASTER/COBRA/CONTEMPT. Currently, the MARS code system has been distributed to 18 domestic organizations, including research, industrial, regulatory organizations and universities. The MARS has been being widely used for the safety research of existing PWRs, advanced PWR, CANDU and research reactor, the pre-test analysis of TH experiments, and others.

  1. New developments in seismic analysis of primary and secondary systems

    International Nuclear Information System (INIS)

    Gupta, A.K.

    1984-01-01

    Primary and secondary systems often must be analyzed using decoupled models. This paper presents recent advances made at NCSU in the seismic analysis of these systems. Algorithms are presented by which coupled mode shapes and frequencies can be evaluated without performing a new eigenvalue solution, given the mode shapes and frequencies of the decoupled models. Simple and accurate equations are presented to predict changes in frequencies and responses. With the coupled mode shapes and frequencies, one can obtain any primary or secondary response directly from the input spectrum. Alternatively, one can develop instructure spectra at various locations in the primary system accounting for the primary-secondary system interaction. Correlation between the support motions is also generated. Equations are presented for evaluating complex mode shapes and frequencies of coupled systems when due to unequal damping values of primary and secondary systems, the coupled system becomes nonproportionally damped. Recent progress, in case of tuned systems is also reported

  2. Object-Oriented Analysis, Structured Analysis, and Jackson System Development

    NARCIS (Netherlands)

    Van Assche, F.; Wieringa, Roelf J.; Moulin, B.; Rolland, C

    1991-01-01

    Conceptual modeling is the activity of producing a conceptual model of an actual or desired version of a universe of discourse (UoD). In this paper, two methods of conceptual modeling are compared, structured analysis (SA) and object-oriented analysis (OOA). This is done by transforming a model

  3. The system development of consequence analysis for army nuclear accident

    International Nuclear Information System (INIS)

    Yuan Wei; Zuo Li; Chen Xianbo; Qu Yantao; Yang Hongwei

    2014-01-01

    Through the analysis of the assessment technique and the function characteristics of related system, domestic nuclear facilities accident consequence, assessment technique for army nuclear accident consequence was studied and the difference between the two evaluation methods were also compared. On this basis, the function, the application and the optimization of a software system that was developed for army was discussed. All of these will provide suggestion for the nuclear weapon accident consequence assessment. (authors)

  4. Development of intelligent system for a thermal analysis instrument

    International Nuclear Information System (INIS)

    Xu Xiaoli; Wu Guoxin; Shi Yongchao

    2005-01-01

    The key techniques for the intelligent analysis instrument developed are proposed. Based on the technique of virtual instrumentation, the intelligent PID control algorithm to control the temperature of thermal analysis instrument is described. The dynamic character and the robust performance of traditional PID controls are improved through the dynamic gain factor, temperature rate change factor, the forecast factor, and the temperature correction factor is introduced. Using the graphic development environment of LabVIEW, the design of system modularization and the graphic display are implemented. By means of multiple mathematical modules, intelligent data processing is realized

  5. Student project of optical system analysis API-library development

    Science.gov (United States)

    Ivanova, Tatiana; Zhukova, Tatiana; Dantcaranov, Ruslan; Romanova, Maria; Zhadin, Alexander; Ivanov, Vyacheslav; Kalinkina, Olga

    2017-08-01

    In the paper API-library software developed by students of Applied and Computer Optics Department (ITMO University) for optical system design is presented. The library performs paraxial and real ray tracing, calculates 3d order (Seidel) aberration and real ray aberration of axis and non-axis beams (wave, lateral, longitudinal, coma, distortion etc.) and finally, approximate wave aberration by Zernike polynomials. Real aperture can be calculated by considering of real rays tracing failure on each surface. So far we assume optical system is centered, with spherical or 2d order aspherical surfaces. Optical glasses can be set directly by refraction index or by dispersion coefficients. The library can be used for education or research purposes in optical system design area. It provides ready to use software functions for optical system simulation and analysis that developer can simply plug into their software development for different purposes, for example for some specific synthesis tasks or investigation of new optimization modes. In the paper we present an example of using the library for development of cemented doublet synthesis software based on Slusarev's methodology. The library is used in optical system optimization recipes course for deep studying of optimization model and its application for optical system design. Development of such software is an excellent experience for students and help to understanding optical image modeling and quality analysis. This development is organized as student group joint project. We try to organize it as a group in real research and development project, so each student has his own role in the project and then use whole library functionality in his own master or bachelor thesis. Working in such group gives students useful experience and opportunity to work as research and development engineer of scientific software in the future.

  6. Development of automated system for real-time LIBS analysis

    Science.gov (United States)

    Mazalan, Elham; Ali, Jalil; Tufail, Kashif; Haider, Zuhaib

    2017-03-01

    Recent developments in Laser Induced Breakdown Spectroscopy (LIBS) instrumentation allow the acquisition of several spectra in a second. The dataset from a typical LIBS experiment can consist of a few thousands of spectra. To extract the useful information from that dataset is painstaking effort and time consuming process. Most of the currently available softwares for spectral data analysis are expensive and used for offline data analysis. LabVIEW software compatible with spectrometer (in this case Ocean Optics Maya pro spectrometer), can be used to for data acquisition and real time analysis. In the present work, a LabVIEW based automated system for real-time LIBS analysis integrated with spectrometer device is developed. This system is capable of performing real time analysis based on as-acquired LIBS spectra. Here, we have demonstrated the LIBS data acquisition and real time calculations of plasma temperature and electron density. Data plots and variations in spectral intensity in response to laser energy were observed on LabVIEW monitor interface. Routine laboratory samples of brass and calcine bone were utilized in this experiment. Developed program has shown impressive performance in real time data acquisition and analysis.

  7. Developing interprofessional education online: An ecological systems theory analysis.

    Science.gov (United States)

    Bluteau, Patricia; Clouder, Lynn; Cureton, Debra

    2017-07-01

    This article relates the findings of a discourse analysis of an online asynchronous interprofessional learning initiative involving two UK universities. The impact of the initiative is traced over three intensive periods of online interaction, each of several-weeks duration occurring over a three-year period, through an analysis of a random sample of discussion forum threads. The corpus of rich data drawn from the forums is interpreted using ecological systems theory, which highlights the complexity of interaction of individual, social and cultural elements. Ecological systems theory adopts a life course approach to understand how development occurs through processes of progressively more complex reciprocal interaction between people and their environment. This lens provides a novel approach for analysis and interpretation of findings with respect to the impact of pre-registration interprofessional education and the interaction between the individual and their social and cultural contexts as they progress through 3/4 years of their programmes. Development is mapped over time (the chronosystem) to highlight the complexity of interaction across microsystems (individual), mesosystems (curriculum and institutional/care settings), exosystems (community/wider local context), and macrosystems (national context and culture). This article illustrates the intricacies of students' interprofessional development over time and the interactive effects of social ecological components in terms of professional knowledge and understanding, wider appreciation of health and social care culture and identity work. The implications for contemporary pre-registration interprofessional education and the usefulness and applicability of ecological systems theory for future research and development are considered.

  8. Project development and commercialisation of on-line analysis systems

    International Nuclear Information System (INIS)

    Watt, J.S.

    2000-01-01

    A project team first in the Australian Atomic Energy Commission (AAEC) and since 1982 in CSIRO has developed many on-line analysis systems for the mineral and energy industries. The development of these projects, usually lasting 7-10 years, has followed a common pattern of laboratory R and D, field trials, commercialisation and technology transfer. This successful pattern is illustrated using examples of the development of systems for the on-line analysis of mineral slurries, for determination of the ash content of coal on conveyors, and for determination of the flow rates of oil, water and gas in pipelines. The first two systems, licensed to Australian companies, are used world-wide. They are now the market leaders for radioisotope gauges in their application field. The third, the multiphase flow meter, was licensed in 1997 to an international company. This meter has even greater potential than the other two systems for economic benefit from its use and for numbers of installations. (author)

  9. Development of a natural Gas Systems Analysis Model (GSAM)

    International Nuclear Information System (INIS)

    Godec, M.; Haas, M.; Pepper, W.; Rose, J.

    1993-01-01

    Recent dramatic changes in natural gas markets have significant implications for the scope and direction of DOE's upstream as well as downstream natural gas R ampersand D. Open access transportation changes the way gas is bought and sold. The end of the gas deliverability surplus requires increased reserve development above recent levels. Increased gas demand for power generation and other new uses changes the overall demand picture in terms of volumes, locations and seasonality. DOE's Natural Gas Strategic Plan requires that its R ampersand D activities be evaluated for their ability to provide adequate supplies of reasonably priced gas. Potential R ampersand D projects are to be evaluated using a full fuel cycle, benefit-cost approach to estimate likely market impact as well as technical success. To assure R ampersand D projects are evaluated on a comparable basis, METC has undertaken the development of a comprehensive natural gas technology evaluation framework. Existing energy systems models lack the level of detail required to estimate the impact of specific upstream natural gas technologies across the known range of geological settings and likely market conditions. Gas Systems Analysis Model (GSAM) research during FY 1993 developed and implemented this comprehensive, consistent natural gas system evaluation framework. Rather than a isolated research activity, however, GSAM represents the integration of many prior and ongoing natural gas research efforts. When complete, it will incorporate the most current resource base description, reservoir modeling, technology characterization and other geologic and engineering aspects developed through recent METC and industry gas R ampersand D programs

  10. Development of nonlinear dynamic analysis program for nuclear piping systems

    International Nuclear Information System (INIS)

    Kamichika, Ryoichi; Izawa, Masahiro; Yamadera, Masao

    1980-01-01

    In the design for nuclear power piping, pipe-whip protection shall be considered in order to keep the function of safety related system even when postulated piping rupture occurs. This guideline was shown in U.S. Regulatory Guide 1.46 for the first time and has been applied in Japanese nuclear power plants. In order to analyze the dynamic behavior followed by pipe rupture, nonlinear analysis is required for the piping system including restraints which play the role of an energy absorber. REAPPS (Rupture Effective Analysis of Piping Systems) has been developed for this purpose. This program can be applied to general piping systems having branches etc. Pre- and post- processors are prepared in this program in order to easily input the data for the piping engineer and show the results optically by use of a graphic display respectively. The piping designer can easily solve many problems in his daily work by use of this program. This paper describes about the theoretical background and functions of this program and shows some examples. (author)

  11. Development of the integrated system reliability analysis code MODULE

    International Nuclear Information System (INIS)

    Han, S.H.; Yoo, K.J.; Kim, T.W.

    1987-01-01

    The major components in a system reliability analysis are the determination of cut sets, importance measure, and uncertainty analysis. Various computer codes have been used for these purposes. For example, SETS and FTAP are used to determine cut sets; Importance for importance calculations; and Sample, CONINT, and MOCUP for uncertainty analysis. There have been problems when the codes run each other and the input and output are not linked, which could result in errors when preparing input for each code. The code MODULE was developed to carry out the above calculations simultaneously without linking input and outputs to other codes. MODULE can also prepare input for SETS for the case of a large fault tree that cannot be handled by MODULE. The flow diagram of the MODULE code is shown. To verify the MODULE code, two examples are selected and the results and computation times are compared with those of SETS, FTAP, CONINT, and MOCUP on both Cyber 170-875 and IBM PC/AT. Two examples are fault trees of the auxiliary feedwater system (AFWS) of Korea Nuclear Units (KNU)-1 and -2, which have 54 gates and 115 events, 39 gates and 92 events, respectively. The MODULE code has the advantage that it can calculate the cut sets, importances, and uncertainties in a single run with little increase in computing time over other codes and that it can be used in personal computers

  12. Development of Network Analysis and Visualization System for KEGG Pathways

    Directory of Open Access Journals (Sweden)

    Dongmin Seo

    2015-07-01

    Full Text Available Big data refers to informationalization technology for extracting valuable information through the use and analysis of large-scale data and, based on that data, deriving plans for response or predicting changes. With the development of software and devices for next generation sequencing, a vast amount of bioinformatics data has been generated recently. Also, bioinformatics data based big-data technology is rising rapidly as a core technology by the bioinformatician, biologist and big-data scientist. KEGG pathway is bioinformatics data for understanding high-level functions and utilities of the biological system. However, KEGG pathway analysis requires a lot of time and effort because KEGG pathways are high volume and very diverse. In this paper, we proposed a network analysis and visualization system that crawl user interest KEGG pathways, construct a pathway network based on a hierarchy structure of pathways and visualize relations and interactions of pathways by clustering and selecting core pathways from the network. Finally, we construct a pathway network collected by starting with an Alzheimer’s disease pathway and show the results on clustering and selecting core pathways from the pathway network.

  13. Status Report on NEAMS System Analysis Module Development

    Energy Technology Data Exchange (ETDEWEB)

    Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Sumner, T. [Argonne National Lab. (ANL), Argonne, IL (United States); Yu, Y. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-12-01

    Under the Reactor Product Line (RPL) of DOE-NE’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, an advanced SFR System Analysis Module (SAM) is being developed at Argonne National Laboratory. The goal of the SAM development is to provide fast-running, improved-fidelity, whole-plant transient analyses capabilities. SAM utilizes an object-oriented application framework MOOSE), and its underlying meshing and finite-element library libMesh, as well as linear and non-linear solvers PETSc, to leverage modern advanced software environments and numerical methods. It also incorporates advances in physical and empirical models and seeks closure models based on information from high-fidelity simulations and experiments. This report provides an update on the SAM development, and summarizes the activities performed in FY15 and the first quarter of FY16. The tasks include: (1) implement the support of 2nd-order finite elements in SAM components for improved accuracy and computational efficiency; (2) improve the conjugate heat transfer modeling and develop pseudo 3-D full-core reactor heat transfer capabilities; (3) perform verification and validation tests as well as demonstration simulations; (4) develop the coupling requirements for SAS4A/SASSYS-1 and SAM integration.

  14. Economic development and wage inequality: A complex system analysis

    Science.gov (United States)

    Pugliese, Emanuele; Pietronero, Luciano

    2017-01-01

    Adapting methods from complex system analysis, this paper analyzes the features of the complex relationship between wage inequality and the development and industrialization of a country. Development is understood as a combination of a monetary index, GDP per capita, and a recently introduced measure of a country’s economic complexity: Fitness. Initially the paper looks at wage inequality on a global scale, over the time period 1990–2008. Our empirical results show that globally the movement of wage inequality along with the ongoing industrialization of countries has followed a longitudinally persistent pattern comparable to the one theorized by Kuznets in the fifties: countries with an average level of development suffer the highest levels of wage inequality. Next, the study narrows its focus on wage inequality within the United States. By using data on wages and employment in the approximately 3100 US counties over the time interval 1990–2014, it generalizes the Fitness-Complexity metric for geographic units and industrial sectors, and then investigates wage inequality between NAICS industries. The empirical time and scale dependencies are consistent with a relation between wage inequality and development driven by institutional factors comparing countries, and by change in the structural compositions of sectors in a homogeneous institutional environment, such as the counties of the United States. PMID:28926577

  15. Economic development and wage inequality: A complex system analysis.

    Directory of Open Access Journals (Sweden)

    Angelica Sbardella

    Full Text Available Adapting methods from complex system analysis, this paper analyzes the features of the complex relationship between wage inequality and the development and industrialization of a country. Development is understood as a combination of a monetary index, GDP per capita, and a recently introduced measure of a country's economic complexity: Fitness. Initially the paper looks at wage inequality on a global scale, over the time period 1990-2008. Our empirical results show that globally the movement of wage inequality along with the ongoing industrialization of countries has followed a longitudinally persistent pattern comparable to the one theorized by Kuznets in the fifties: countries with an average level of development suffer the highest levels of wage inequality. Next, the study narrows its focus on wage inequality within the United States. By using data on wages and employment in the approximately 3100 US counties over the time interval 1990-2014, it generalizes the Fitness-Complexity metric for geographic units and industrial sectors, and then investigates wage inequality between NAICS industries. The empirical time and scale dependencies are consistent with a relation between wage inequality and development driven by institutional factors comparing countries, and by change in the structural compositions of sectors in a homogeneous institutional environment, such as the counties of the United States.

  16. Development of the Structure of Economic System: the System-Synergetic Analysis of Subsystems

    Directory of Open Access Journals (Sweden)

    Shevchenko Olena O.

    2016-04-01

    Full Text Available The article is aimed at studying the structure of economic system using the system-synergistic analysis of its subsystems. Evolution in using the system approach for analyzing economic systems in the modern world has been considered. Signs of the system approach as well as characteristics of economic systems have been allocated. Both development and evolution of economic systems has been defined in the current paradigmatic context. In accordance with the synergetic paradigm of research, system transformation of society has been substantiated, influence of bifurcation mechanisms on the course of transformational processes in the development of economic systems has been proven. Prospects for further research in this area are to define the fundamental scientific bases of research on economic mechanism through the prism of the civilizational approach, developing a contemporary base of researches on fluctuations of economic systems in the modern world, proper forecasting of bifurcation status of the national economic system. Further use of the system-synergetic analysis is advisable to account the characteristics of the development crisis of society and economic systems, which are the main objects of influence in the management of global economic processes in general and the main object of studying in the course of their cognition, using the civilizational approach of researching.

  17. Initial development of an automated task analysis profiling system

    International Nuclear Information System (INIS)

    Jorgensen, C.C.

    1984-01-01

    A program for automated task analysis is described. Called TAPS (task analysis profiling system), the program accepts normal English prose and outputs skills, knowledges, attitudes, and abilities (SKAAs) along with specific guidance and recommended ability measurement tests for nuclear power plant operators. A new method for defining SKAAs is presented along with a sample program output

  18. Development of automated system of heavy water analysis

    International Nuclear Information System (INIS)

    Fedorchenko, O.A.; Novozhilov, V.A.; Trenin, V.D.

    1993-01-01

    Application of traditional methods of qualitative and quantitative control of coolant (moderator) for the analysis of heavy water with high tritium content presents many difficulties and an inevitable accumulation of wastes that many facilities will not accept. This report describes an automated system for heavy water sampling and analysis

  19. Development of data analysis tool for combat system integration

    Directory of Open Access Journals (Sweden)

    Seung-Chun Shin

    2013-03-01

    Full Text Available System integration is an important element for the construction of naval combat ships. In particular, because impeccable combat system integration together with the sensors and weapons can ensure the combat capability and survivability of the ship, the integrated performance of the combat system should be verified and validated whether or not it fulfills the requirements of the end user. In order to conduct systematic verification and validation, a data analysis tool is requisite. This paper suggests the Data Extraction, Recording and Analysis Tool (DERAT for the data analysis of the integrated performance of the combat system, including the functional definition, architecture and effectiveness of the DERAT by presenting the test results.

  20. Development of a System Analysis Toolkit for Sensitivity Analysis, Uncertainty Propagation, and Estimation of Parameter Distribution

    International Nuclear Information System (INIS)

    Heo, Jaeseok; Kim, Kyung Doo

    2015-01-01

    Statistical approaches to uncertainty quantification and sensitivity analysis are very important in estimating the safety margins for an engineering design application. This paper presents a system analysis and optimization toolkit developed by Korea Atomic Energy Research Institute (KAERI), which includes multiple packages of the sensitivity analysis and uncertainty quantification algorithms. In order to reduce the computing demand, multiple compute resources including multiprocessor computers and a network of workstations are simultaneously used. A Graphical User Interface (GUI) was also developed within the parallel computing framework for users to readily employ the toolkit for an engineering design and optimization problem. The goal of this work is to develop a GUI framework for engineering design and scientific analysis problems by implementing multiple packages of system analysis methods in the parallel computing toolkit. This was done by building an interface between an engineering simulation code and the system analysis software packages. The methods and strategies in the framework were designed to exploit parallel computing resources such as those found in a desktop multiprocessor workstation or a network of workstations. Available approaches in the framework include statistical and mathematical algorithms for use in science and engineering design problems. Currently the toolkit has 6 modules of the system analysis methodologies: deterministic and probabilistic approaches of data assimilation, uncertainty propagation, Chi-square linearity test, sensitivity analysis, and FFTBM

  1. Ecological Network Analysis for Economic Systems: Growth and Development and Implications for Sustainable Development

    Science.gov (United States)

    Huang, Jiali; Ulanowicz, Robert E.

    2014-01-01

    The quantification of growth and development is an important issue in economics, because these phenomena are closely related to sustainability. We address growth and development from a network perspective in which economic systems are represented as flow networks and analyzed using ecological network analysis (ENA). The Beijing economic system is used as a case study and 11 input–output (I-O) tables for 1985–2010 are converted into currency networks. ENA is used to calculate system-level indices to quantify the growth and development of Beijing. The contributions of each direct flow toward growth and development in 2010 are calculated and their implications for sustainable development are discussed. The results show that during 1985–2010, growth was the main attribute of the Beijing economic system. Although the system grew exponentially, its development fluctuated within only a small range. The results suggest that system ascendency should be increased in order to favor more sustainable development. Ascendency can be augmented in two ways: (1) strengthen those pathways with positive contributions to increasing ascendency and (2) weaken those with negative effects. PMID:24979465

  2. Ecological network analysis for economic systems: growth and development and implications for sustainable development.

    Science.gov (United States)

    Huang, Jiali; Ulanowicz, Robert E

    2014-01-01

    The quantification of growth and development is an important issue in economics, because these phenomena are closely related to sustainability. We address growth and development from a network perspective in which economic systems are represented as flow networks and analyzed using ecological network analysis (ENA). The Beijing economic system is used as a case study and 11 input-output (I-O) tables for 1985-2010 are converted into currency networks. ENA is used to calculate system-level indices to quantify the growth and development of Beijing. The contributions of each direct flow toward growth and development in 2010 are calculated and their implications for sustainable development are discussed. The results show that during 1985-2010, growth was the main attribute of the Beijing economic system. Although the system grew exponentially, its development fluctuated within only a small range. The results suggest that system ascendency should be increased in order to favor more sustainable development. Ascendency can be augmented in two ways: (1) strengthen those pathways with positive contributions to increasing ascendency and (2) weaken those with negative effects.

  3. Development and analysis of SCR requirements tables for system scenarios

    Science.gov (United States)

    Callahan, John R.; Morrison, Jeffery L.

    1995-01-01

    We describe the use of scenarios to develop and refine requirement tables for parts of the Earth Observing System Data and Information System (EOSDIS). The National Aeronautics and Space Administration (NASA) is developing EOSDIS as part of its Mission-To-Planet-Earth (MTPE) project to accept instrument/platform observation requests from end-user scientists, schedule and perform requested observations of the Earth from space, collect and process the observed data, and distribute data to scientists and archives. Current requirements for the system are managed with tools that allow developers to trace the relationships between requirements and other development artifacts, including other requirements. In addition, the user community (e.g., earth and atmospheric scientists), in conjunction with NASA, has generated scenarios describing the actions of EOSDIS subsystems in response to user requests and other system activities. As part of a research effort in verification and validation techniques, this paper describes our efforts to develop requirements tables from these scenarios for the EOSDIS Core System (ECS). The tables specify event-driven mode transitions based on techniques developed by the Naval Research Lab's (NRL) Software Cost Reduction (SCR) project. The SCR approach has proven effective in specifying requirements for large systems in an unambiguous, terse format that enhance identification of incomplete and inconsistent requirements. We describe development of SCR tables from user scenarios and identify the strengths and weaknesses of our approach in contrast to the requirements tracing approach. We also evaluate the capabilities of both approach to respond to the volatility of requirements in large, complex systems.

  4. MUNICIPAL INDICATORS SYSTEM SUSTAINABLE DEVELOPMENT: A COMPARATIVE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Anderson Saccol Ferreira

    2015-12-01

    Full Text Available The article analyzes the indicators of sustainable development in the municipalities of Chapeco , Joaçaba , Port Union and Mafra, which developed the urban and territorial expansion of the West and North of the Santa Catarina region during the twentieth century . Thus, the objective of the analysis is to identify the similarities and differences of municipal sustainable development of each municipality , proposing alternative ways to improve these indexes, through the concepts Sachs (1997. The work is guided by a comparative analysis of data considering the indicators in 2012 and 2014 , through a survey of documentary approach . From this analysis , identified and demonstrated the points with disabilities, but at the same time essential to raise the indices of sustainability of municipalities in socio-cultural terms, economic, environmental and political

  5. Development of Regulatory Thermal-Hydraulic Analysis System (RETAS)

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Seung-Hoon; Kim, In-Goo; Kim, Hho-Jung; Cho, Yong Jin [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2007-10-15

    A review is provided of the reasons why the Korea Institute of Nuclear Safety needs improvement of the existing codes employed for a regulatory audit. The proposed new organization of the codes, developed or to be developed, is presented together with illustrative applications. Inspection of the quality assurance activities is planned to ensure the robustness of MARS (Multi-dimensional Analysis for Reactor Safety) code, served as a pivot of the organization.

  6. Developing a System for Efficient Analysis of Lumbosacral Sagittal Balance

    Directory of Open Access Journals (Sweden)

    D. M. Zhuk

    2015-01-01

    Full Text Available Lumbosacral sagittal balance is the neutral vertical alignment in the sagittal plane to provide decreasing stress loading on muscular-ligamentous structures. The achieving sagittal balance is a basis to provide successful surgical treatment and minimize further complications. As of today, there is no standard quantitative evaluation method of sagittal lumbo-sacral balance, which allows conducting its effective analysis and planning surgical treatment taking into consideration the preservation of normal biomechanics of lumbosacral spine. The goal of the study is to develop a diagnostic system for individual correction of lumbo-sacral sagittal balance by the author’s method with automatic counting and optimized matching of data values based on a specified number of terms using medical visualization data. This study has been conducted with RMAPE’s Department of Traumatology and Orthopedic Surgery. To solve the problem, a random searching algorithm has been exploited. The stop condition of the algorithm was to achieve the objective function value in adjusted interval, initial points of which are the calculated (angular values. The interaction of the angular values, used in the proposed method has been investigated, and their proportional change has been proved. Moreover, the mathematical dependence among geometrical and anatomical parameters of lumbosacral spine has been determined. Based on conducted study, a number of algorithms enabling the automation of the individual determination of optimal lumbosacral balance’s parameters at preoperative planning stage for patients with vertebral column diseases have been created. This allows us to raise physician’s efficiency, minimize mid- and long-term risk of postoperative complications, and avoid reoperations, and prognosticate long-term complications already performed surgery.

  7. Development of a Gas Systems Analysis Model (GSAM)

    International Nuclear Information System (INIS)

    Becker, A.B.; Pepper, W.J.

    1995-01-01

    Objective of developing this model (GSAM) is to create a comprehensive, nonproprietary, PC-based model of domestic gas industry activity. The system can assess impacts of various changes in the natural gas system in North America; individual and collective impacts due to changes in technology and economic conditions are explicitly modeled in GSAM. Major gas resources are all modeled, including conventional, tight, Devonian Shale, coalbed methane, and low-quality gas sources. The modeling system assesses all key components of the gas industry, including available resources, exploration, drilling, completion, production, and processing practices. Distribution, storage, and utilization of natural gas in a dynamic market-gased analytical structure is assessed. GSAM is designed to provide METC managers with a tool to project impacts of future research, development, and demonstration benefits

  8. Systems Analysis Developed for All-Electric Aircraft Propulsion

    Science.gov (United States)

    Kohout, Lisa L.

    2004-01-01

    There is a growing interest in the use of fuel cells as a power source for all-electric aircraft propulsion as a means to substantially reduce or eliminate environmentally harmful emissions. Among the technologies under consideration for these concepts are advanced proton exchange membrane (PEM) and solid oxide fuel cells (SOFCs), alternative fuels and fuel processing, and fuel storage. A multidisciplinary effort is underway at the NASA Glenn Research Center to develop and evaluate concepts for revolutionary, nontraditional fuel cell power and propulsion systems for aircraft applications. As part of this effort, system studies are being conducted to identify concepts with high payoff potential and associated technology areas for further development. To support this effort, a suite of component models was developed to estimate the mass, volume, and performance for a given system architecture. These models include a hydrogen-air PEM fuel cell; an SOFC; balance-of-plant components (compressor, humidifier, separator, and heat exchangers); compressed gas, cryogenic, and liquid fuel storage tanks; and gas turbine/generator models for hybrid system applications. First-order feasibility studies were completed for an all-electric personal air vehicle utilizing a fuel-cell-powered propulsion system. A representative aircraft with an internal combustion engine was chosen as a baseline to provide key parameters to the study, including engine power and subsystem mass, fuel storage volume and mass, and aircraft range. The engine, fuel tank, and associated ancillaries were then replaced with a fuel cell subsystem. Various configurations were considered including a PEM fuel cell with liquid hydrogen storage, a direct methanol PEM fuel cell, and a direct internal reforming SOFC/turbine hybrid system using liquid methane fuel. Each configuration was compared with the baseline case on a mass and range basis.

  9. Live dynamic analysis of the developing cardiovascular system in mice

    Science.gov (United States)

    Lopez, Andrew L.; Wang, Shang; Larin, Kirill V.; Larina, Irina V.

    2017-02-01

    The study of the developing cardiovascular system in mice is important for understanding human cardiogenesis and congenital heart defects. Our research focuses on imaging early development in the mouse embryo to specifically understand cardiovascular development under the regulation of dynamic factors like contractile force and blood flow using optical coherence tomography (OCT). We have previously developed an OCT based approach that combines static embryo culture and advanced image processing with computational modeling to live-image mouse embryos and obtain 4D (3D+time) cardiodynamic datasets. Here we present live 4D dynamic blood flow imaging of the early embryonic mouse heart in correlation with heart wall movement. We are using this approach to understand how specific mutations impact heart wall dynamics, and how this influences flow patterns and cardiogenesis. We perform studies in mutant embryos with cardiac phenotypes such as myosin regulatory light chain 2, atrial isoform (Mlc2a). This work is brings us closer to understanding the connections between dynamic mechanical factors and gene programs responsible for early cardiovascular development.

  10. Development for analysis system of rods enrichment of nuclear fuels

    International Nuclear Information System (INIS)

    Rojas C, E.L.

    1998-01-01

    Nuclear industry is strongly regulated all over the world and quality assurance is important in every nuclear installation or process related with it. Nuclear fuel manufacture is not the exception. ININ was committed to manufacture four nuclear fuel bundles for the CFE nucleo electric station at Laguna Verde, Veracruz, under General Electric specifications and fulfilling all the requirements of this industry. One of the quality control requisites in nuclear fuel manufacture deals with the enrichment of the pellets inside the fuel bundle rods. To achieve the quality demanded in this aspect, the system described in this work was developed. With this system, developed at ININ it is possible to detect enrichment spikes since 0.4 % in a column of pellets with a 95 % confidence interval and to identify enrichment differences greater than 0.2 % e between homogeneous segments, also with a 95 % confidence interval. ININ delivered the four nuclear fuel bundles to CFE and these were introduced in the core of the nuclear reactor of Unit 1 in the fifth cycle. Nowadays they are producing energy and have shown a correct mechanical performance and neutronic behavior. (Author)

  11. Developing SASSA: a Soil Analysis Support System for Archaeologists

    Directory of Open Access Journals (Sweden)

    Clare Wilson

    2008-12-01

    Full Text Available There is constant pressure on field archaeologists to be familiar with the core concepts of a diverse range of specialist disciplines. Soils and sediments are an integral part of archaeological sites, and soil and sedimentary analyses applied to archaeological questions are now recognised as an important branch of geoarchaeology. However, the teaching of soils in archaeology degrees is variable and many archaeologists complain they lack the confidence and skills to describe and interpret properly the deposits they excavate. SASSA (Soil Analysis Support System for Archaeologists is a free-to-use, internet-based system designed to familiarise archaeologists with the concepts and possibilities offered by the scientific study of soils and sediments associated with archaeological sites. The aims of SASSA are: ◦To provide soils training specifically for archaeologists, suitable for either a university or workplace setting. ◦To provide a freely accessible soils and archaeology knowledge base for archaeologists working in either the office or the field. ◦To support archaeologists describing and interpreting soils in the field. ◦To enhance understanding of the types of archaeological questions that soil analysis can help to address. ◦To initiate dialogue between archaeologists, geoarchaeologists, and soil scientists in order to encourage the thoughtful application of soil analyses to archaeological questions. SASSA consists of two core components: a knowledge base and a field tool. The 'front-end' of the website is the knowledge base; this uses wiki technology to allow users to add their own content and encourage dialogue between archaeologists and geoarchaeologists. The field tool uses an XML data structure and decision-tree support system to guide the user through the process of describing and interpreting soils and sediments. SASSA is designed for use on both 'static' (PC and 'mobile' (PDA and laptop hardware in order to provide in situ

  12. Design and development of computerized local and overall country's environmental data analysis network system

    International Nuclear Information System (INIS)

    Kim, Chang Gyu; Kang, Jong Gyu; Han, H.; Han, J. S.; Lee, Y. D.; Lee, S. R.; Kang, D. J.; Cho, Y. G.; Yun, S. H.

    2001-03-01

    In this development, we designed a integrated database for efficient data processing of radiation-environment data and developed the CLEAN (Computerized Local and overall country's Environmental data Analysis Network) system. The CLEAN system consists of local radiation-environment network, data analysis system, data open system. We developed the CLEAN system focused on building an integrated database, a data mart, and a CLEAN web site. It is expected that the developed system, which organizes the information related to environmental radiation data systematically, can be utilize for the accurate interpretation, analysis and evaluation

  13. Systems analysis for the development of small resource recovery systems: system performance data. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Crnkovich, P G; Helmstetter, A J

    1980-10-01

    The technologies that should be developed to make small-scale solid waste processing facilities attractive and viable for small municipalities with solid waste between 50 and 250 tons per day are identified. The resource recovery systems investigated were divided into three categories: thermal processng, mechanical separation, and biological processing. Thermal processing systems investigated are: excess-air incineration; starved-air incineration/gasification; and pyrolysis (indirect heating). Mechanical processing systems investigated are: coarse refuse derived fuel; materials separation; dust refuse derived fuel; densified refuse derived fuel; and fine refuse derived fuel. Mechanical processing components investigated include: receiving module; primary size reduction module; combustible separation module; refuse derived fuel preparation module; fuel densification; fuel storage module; ferrous separation; and building and facilities. Pretreatment processes and principle methods of bioconversion of MSW dealing with biological processing are investigated. (MCW)

  14. Developing a Value of Information (VoI) Enabled System from Collection to Analysis

    Science.gov (United States)

    2016-11-01

    ARL-TN-0797 ● NOV 2016 US Army Research Laboratory Developing a Value of Information (VoI)- Enabled System from Collection to...US Army Research Laboratory Developing a Value of Information (VoI)- Enabled System from Collection to Analysis by Mark R Mittrick, John... Developing a Value of Information (VoI)-Enabled System from Collection to Analysis 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

  15. Development Risk Methodology for Whole Systems Trade Analysis

    Science.gov (United States)

    2016-08-01

    Analysis (Fourth Edition)”, McGraw Hill, Boston, 2007 7. Hogg and Tanis, “ Probability and Statistical Inference (Sixth Edition)”, Prentice Hall, 2001 ... Probability 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF RESPONSIBLE PERSON John Nierwinski a...time assessment for one notional technology. This time assessment is a probability distribution [7] where the area under the curve totals 1.0

  16. Developing a functioning visualization and analysis system for performance assessment

    International Nuclear Information System (INIS)

    Jones, M.L.

    1992-01-01

    Various commercial software packages and customized programs provide the ability to analyze and visualize the geology of Yucca Mountain. Starting with sparse, irregularly spaced data a series of gridded models has been developed representing the thermal/mechanical units within the mountain. Using computer aided design (CAD) software and scientific visualization software, the units can be manipulated, analyzed, and graphically displayed. The outputs are typically gridded terrain models, along with files of three-dimensional coordinates, distances, and other dimensional values. Contour maps, profiles, and shaded surfaces are the output for visualization

  17. NOAA Observing System Integrated Analysis (NOSIA): development and support to the NOAA Satellite Observing System Architecture

    Science.gov (United States)

    Reining, R. C.; Cantrell, L. E., Jr.; Helms, D.; LaJoie, M.; Pratt, A. S.; Ries, V.; Taylor, J.; Yuen-Murphy, M. A.

    2016-12-01

    There is a deep relationship between NOSIA-II and the Federal Earth Observation Assessment (EOA) efforts (EOA 2012 and 2016) chartered under the National Science and Technology Council, Committee on Environment, Natural Resources, and Sustainability, co-chaired by the White House Office of Science and Technology Policy, NASA, NOAA, and USGS. NOSIA-1, which was conducted with a limited scope internal to NOAA in 2010, developed the methodology and toolset that was adopted for EOA 2012, and NOAA staffed the team that conducted the data collection, modeling, and analysis effort for EOA 2012. EOA 2012 was the first-ever integrated analysis of the relative impact of 379 observing systems and data sources contributing to the key objectives identified for 13 Societal Benefit Areas (SBA) including Weather, Climate, Disasters, Oceans and Coastal Resources, and Water Resources. This effort culminated in the first National Plan for Civil Earth Observations. NOAA conducted NOSIA-II starting in 2012 to extend the NOSIA methodology across all of NOAA's Mission Service Areas, covering a representative sample (over 1000) of NOAA's products and services. The detailed information from NOSIA-II is being integrated into EOA 2016 to underpin a broad array of Key Products, Services, and (science) Objectives (KPSO) identified by the inter-agency SBA teams. EOA 2016 is expected to provide substantially greater insight into the cross-agency impacts of observing systems contributing to a wide array of KPSOs, and by extension, to societal benefits flowing from these public-facing products. NOSIA-II is being adopted by NOAA as a corporate decision-analysis and support capability to inform leadership decisions on its integrated observing systems portfolio. Application examples include assessing the agency-wide impacts of planned decommissioning of ships and aircraft in NOAA's fleet, and the relative cost-effectiveness of alternative space-based architectures in the post-GOES-R and JPSS era

  18. Cooperative Experimental System Development - cooperative techniques beyound initial design and analysis

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Kyng, Morten; Mogensen, Preben Holst

    1995-01-01

    , however, not limited to this development context, it may be applied for in-house or contract development as well. In system development, particularly in cooperative and experimental system development, we argue that it is necessary to analytically separate the abstract concerns, e.g. analysis, design......This chapter represents a step towards the establishment of a new system development approach, called Cooperative Experimental System Development (CESD). CESD seeks to overcome a number of limitations in existing approaches: specification oriented methods usually assume that system design can...... be based solely on observation and detached reflection; prototyping methods often have a narrow focus on the technical construction of various kinds of prototypes; Participatory Design techniques—including the Scandinavian Cooperative Design (CD) approaches—seldom go beyond the early analysis...

  19. Greenlandic water and sanitation-a context oriented analysis of system challenges towards local sustainable development.

    Science.gov (United States)

    Hendriksen, Kåre; Hoffmann, Birgitte

    2017-08-28

    Today, as Greenland focuses on more economic and cultural autonomy, the continued development of societal infrastructure systems is vital. At the same time, pressure is put on the systems by a lack of financial resources and locally based professional competences as well as new market-based forms of organization. Against this background, the article discusses the challenges facing Greenland's self-rule in relation to further develop the existing water and wastewater systems so that they can contribute to the sustainable development of Greenland. The article reviews the historical development of the water supply and wastewater system. This leads to an analysis of the sectorisation, which in recent decades has reorganized the Greenlandic infrastructures, and of how this process is influencing local sustainable development. The article discusses the socio-economic and human impacts and points to the need for developing the water and sanitation system to support not only hygiene and health, but also local sustainable development.

  20. Developing a systems analysis framework for the National Poverty Alleviation System

    CSIR Research Space (South Africa)

    Marais, M

    2007-09-01

    Full Text Available The purpose of the project is to use systems methodologies developed in a science and engineering environment and to apply these towards a better understanding of the National Poverty Alleviation System. The aim of such a project is to establish a...

  1. Development of Input/Output System for the Reactor Transient Analysis System (RETAS)

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Jae Seung; Kang, Doo Hyuk; Cho, Yeon Sik [ENESYS, Daejeon (Korea, Republic of); Ahn, Seung Hoon; Cho, Yong Jin [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2009-05-15

    A Korea Institute of Nuclear Safety Reactor Transient Analysis System (KINS-RETAS) aims at providing a realistic prediction of core and RCS response to the potential or actual event scenarios in Korean nuclear power plants (NPPs). A thermal hydraulic system code MARS is a pivot code of the RETAS, and used to predict thermal hydraulic (TH) behaviors in the core and associated systems. MARS alone can be applied to many types of transients, but is sometimes coupled with the other codes developed for different objectives. Many tools have been developed to aid users in preparing input and displaying the transient information and output data. Output file and Graphical User Interfaces (GUI) that help prepare input decks, as seen in SNAP (Gitnick, 1998), VISA (K.D. Kim, 2007) and display aids include the eFAST (KINS, 2007). The tools listed above are graphical interfaces. The input deck builders allow the user to create a functional diagram of the plant, pictorially on the screen. The functional diagram, when annotated with control volume and junction numbers, is a nodalization diagram. Data required for an input deck is entered for volumes and junctions through a mouse-driven menu and pop-up dialog; after the information is complete, an input deck is generated. Display GUIs show data from MARS calculations, either during or after the transient. The RETAS requires the user to first generate a set of 'input', two dimensional pictures of the plant on which some of the data is displayed either numerically or with a color map. The RETAS can generate XY-plots of the data. Time histories of plant conditions can be seen via the plots or through the RETAS's replay mode. The user input was combined with design input from MARS developers and experts from both the GUI and ergonomics fields. A partial list of capabilities follows. - 3D display for neutronics. - Easier method (less user time and effort) to generate 'input' for the 3D displays. - Detailed view

  2. Development of 3-D Flow Analysis Code for Fuel Assembly using Unstructured Grid System

    International Nuclear Information System (INIS)

    Myong, Hyon Kook; Kim, Jong Eun; Ahn, Jong Ki; Yang, Seung Yong

    2007-03-01

    The flow through a nuclear rod bundle with mixing vanes are very complex and required a suitable turbulence model to be predicted accurately. Final objective of this study is to develop a CFD code for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system. In order to develop a CFD code for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system, the following researches are made: - Development of numerical algorithm for CFD code's solver - Grid and geometric connectivity data - Development of software(PowerCFD code) for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system - Modulation of software(PowerCFD code) - Development of turbulence model - Development of analysis module of RANS/LES hybrid models - Analysis of turbulent flow and heat transfer - Basic study on LES analysis - Development of main frame on pre/post processors based on GUI - Algorithm for fully-developed flow

  3. Development of 3-D Flow Analysis Code for Fuel Assembly using Unstructured Grid System

    Energy Technology Data Exchange (ETDEWEB)

    Myong, Hyon Kook; Kim, Jong Eun; Ahn, Jong Ki; Yang, Seung Yong [Kookmin Univ., Seoul (Korea, Republic of)

    2007-03-15

    The flow through a nuclear rod bundle with mixing vanes are very complex and required a suitable turbulence model to be predicted accurately. Final objective of this study is to develop a CFD code for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system. In order to develop a CFD code for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system, the following researches are made: - Development of numerical algorithm for CFD code's solver - Grid and geometric connectivity data - Development of software(PowerCFD code) for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system - Modulation of software(PowerCFD code) - Development of turbulence model - Development of analysis module of RANS/LES hybrid models - Analysis of turbulent flow and heat transfer - Basic study on LES analysis - Development of main frame on pre/post processors based on GUI - Algorithm for fully-developed flow.

  4. Development of X-ray diffractometers XD-D1 AI qualitative analysis system

    International Nuclear Information System (INIS)

    Arai, Hiroshi; Uota, Atsushi; Ishida, Hidenobu

    1994-01-01

    Qualitative X-ray diffraction is a very important analytical method, however, it is also very difficult to perform and needs some special skills. Also, the analysis accuracy depends on the operators' knowledge of qualitative analysis. In order that even a beginner analyst can obtain accurate results, we have developed the 'XD-D1 AI Qualitative Analysis System'. This system can support analytical operations with the experts' knowledge made available by AI techniques. Systematizing the experts' knowledge, we applied the system to our expert shell 'GENZO-I/PRO'. This system enabled a beginner analyst to get the same results as a specialist would get. In this paper, we will describe the process of system design, system construction and an example analysis. (author)

  5. Development of MARS for multi-dimensional and multi-purpose thermal-hydraulic system analysis

    International Nuclear Information System (INIS)

    Lee, Won Jae; Chung, Bub Dong; Kim, Kyung Doo; Hwang, Moon Kyu; Jeong, Jae Jun; Ha, Kwi Seok; Joo, Han Gyu

    2000-01-01

    MARS (Multi-dimensional Analysis of Reactor Safety) code is being developed by KAERI for the realistic thermal-hydraulic simulation of light water reactor system transients. MARS 1.4 has been developed as a final version of basic code frame for the multi-dimensional analysis of system thermal-hydraulics. Since MARS 1.3, MARS 1.4 has been improved to have the enhanced code capability and user friendliness through the unification of input/output features, code models and code functions, and through the code modernization. Further improvements of thermal-hydraulic models, numerical method and user friendliness are being carried out for the enhanced code accuracy. As a multi-purpose safety analysis code system, a coupled analysis system, MARS/MASTER/CONTEMPT, has been developed using multiple DLL (Dynamic Link Library) techniques of Windows system. This code system enables the coupled, that is, more realistic analysis of multi-dimensional thermal-hydraulics (MARS 2.0), three-dimensional core kinetics (MASTER) and containment thermal-hydraulics (CONTEMPT). This paper discusses the MARS development program, and the developmental progress of the MARS 1.4 and the MARS/MASTER/CONTEMPT focusing on major features of the codes and their verification. It also discusses thermal hydraulic models and new code features under development. (author)

  6. Development of MARS for multi-dimensional and multi-purpose thermal-hydraulic system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Jae; Chung, Bub Dong; Kim, Kyung Doo; Hwang, Moon Kyu; Jeong, Jae Jun; Ha, Kwi Seok; Joo, Han Gyu [Korea Atomic Energy Research Institute, T/H Safety Research Team, Yusung, Daejeon (Korea)

    2000-10-01

    MARS (Multi-dimensional Analysis of Reactor Safety) code is being developed by KAERI for the realistic thermal-hydraulic simulation of light water reactor system transients. MARS 1.4 has been developed as a final version of basic code frame for the multi-dimensional analysis of system thermal-hydraulics. Since MARS 1.3, MARS 1.4 has been improved to have the enhanced code capability and user friendliness through the unification of input/output features, code models and code functions, and through the code modernization. Further improvements of thermal-hydraulic models, numerical method and user friendliness are being carried out for the enhanced code accuracy. As a multi-purpose safety analysis code system, a coupled analysis system, MARS/MASTER/CONTEMPT, has been developed using multiple DLL (Dynamic Link Library) techniques of Windows system. This code system enables the coupled, that is, more realistic analysis of multi-dimensional thermal-hydraulics (MARS 2.0), three-dimensional core kinetics (MASTER) and containment thermal-hydraulics (CONTEMPT). This paper discusses the MARS development program, and the developmental progress of the MARS 1.4 and the MARS/MASTER/CONTEMPT focusing on major features of the codes and their verification. It also discusses thermal hydraulic models and new code features under development. (author)

  7. [Development of an analysis system for X-ray cephalometry by Windows platform].

    Science.gov (United States)

    Wang, Hai-bin; Zhang, Yang; Chen, Shi-pei; Hu, Wei; Wang, Jian-qi; Yang, Bo; Duan, Yin-zhong

    2002-07-01

    Here in this paper introduced is an analysis system for X-ray cephalometry developed through Windows platform,which includes three parts: data input, cephalometry analysis & calculation, and display & printing of diagnostic results. It has been applied in orthodontic department of Stomatological Hospital of the Fourth Military Medical University, and it is quite convenient for doctors' cephalometry diagnosis.

  8. Software design analysis technique for the development of PLC-based safety-critical systems

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Seo Ryong; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejeon (Korea, Republic of)

    2005-11-15

    To develop and implement a safety-critical system, the requirements of the system must be analyzed thoroughly during the phases of a software development's life cycle because a single error in the requirements can generate serious software faults. In this study, a nuclear FBD-style design specification and analysis (NuFDS) approach was proposed for PLC based safety-critical systems. The NuFDS approach is suggested in a straightforward manner for the effective and formal specification and analysis of software designs. Accordingly, the proposed NuFDS approach comprises one technique for specifying the software design and another for analyzing the software design.

  9. Development of a 3-D simulation analysis system for PWR control rod drive mechanism

    International Nuclear Information System (INIS)

    Tanaka, Akio; Futahashi, Kensuke; Takanabe, Kiyoshi; Kurimura, Chikara; Kato, Jungo; Hara, Hidekiyo

    2008-01-01

    A 3-D virtual analysis system to analyze the motion of control rod drive mechanism (CRDM) was developed. The analysis system consists of a 3-D model established as per the actual dimensions and interfaces of CRDM parts and a routine to calculate the forces acting on the mechanism, and was verified by mock-up test using the same equipment as the actual product. The analysis system is useful for functional evaluation in maintenance or to factor out root causes in the case of malfunction of CRDM

  10. Development of dynamic analysis code for HTTR hydrogen production system (Contract research)

    International Nuclear Information System (INIS)

    Maeda, Yukimasa; Nishihara, Tetsuo; Ohashi, Hirohumi; Sato, Hiroyuki; Inagaki, Yoshiyuki

    2005-03-01

    A heat and mass balance analysis code (N-HYPAC) has been developed to investigate transient behavior in the HTTR hydrogen production system. The code can analyze heat and mass transfer (temperature and mass and pressure distributions of process and helium gases) and behavior of the control system under both static state (case of steady operation) and dynamic state (case of transient operation). Analysis model of helium and process gases from IHX to secondary helium loop and hydrogen production system has been constructed. This report describes analytical flow sheet, construction of the code, basic equations, method to treat the input data, estimation of the preliminary analysis. (author)

  11. Analysis of Java Client/Server and Web Programming Tools for Development of Educational Systems.

    Science.gov (United States)

    Muldner, Tomasz

    This paper provides an analysis of old and new programming tools for development of client/server programs, particularly World Wide Web-based programs. The focus is on development of educational systems that use interactive shared workspaces to provide portable and expandable solutions. The paper begins with a short description of relevant terms.…

  12. Financial Ratio Analysis: the Development of a Dedicated Management Information System

    Directory of Open Access Journals (Sweden)

    Voicu-Dan Dragomir

    2007-01-01

    Full Text Available This paper disseminates the results of the development process for a financial analysis information system. The system has been subject to conceptual design using the Unified Modeling Language (UML and has been implemented in object-oriented manner using the Visual Basic .NET 2003 programming language. The classic financial analysis literature is focused on the chain-substitution method of computing the prior-year to current-year variation of linked financial ratios. We have applied this technique on the DuPont System of analysis concerning the Return on Equity ratio, by designing several structural UML diagrams depicting the breakdown and analysis of each financial ratio involved. The resulting computer application offers a flexible approach to the analytical tools: the user is required to introduce the raw data and the system provides both table-style and charted information on the output of computation. User-friendliness is also a key feature of this particular financial analysis application.

  13. Development of Uncertainty Analysis Method for SMART Digital Core Protection and Monitoring System

    International Nuclear Information System (INIS)

    Koo, Bon Seung; In, Wang Kee; Hwang, Dae Hyun

    2012-01-01

    The Korea Atomic Energy Research Institute has developed a system-integrated modular advanced reactor (SMART) for a seawater desalination and electricity generation. Online digital core protection and monitoring systems, called SCOPS and SCOMS respectively were developed. SCOPS calculates minimum DNBR and maximum LPD based on the several online measured system parameters. SCOMS calculates the variables of limiting conditions for operation. KAERI developed overall uncertainty analysis methodology which is used statistically combining uncertainty components of SMART core protection and monitoring system. By applying overall uncertainty factors in on-line SCOPS/SCOMS calculation, calculated LPD and DNBR are conservative with a 95/95 probability/confidence level. In this paper, uncertainty analysis method is described for SMART core protection and monitoring system

  14. The Analysis of Development Condition of Taekwondo Dan System in Hebei Province

    Directory of Open Access Journals (Sweden)

    Cao Shen

    2015-01-01

    Full Text Available This article made use of the literature, questionnaire and mathematical statistics method for the Taekwondo practitioners and coaches in Hebei province to carry out investigation, analysis on the development situation of Dan system of Taekwondo, to influence and implement Dan system development of Taekwondo in Hebei province. The results showed, most road museums are organizing assessment of Dan System, but there is still half of the practitioners are willing to participate in grading system of examination and did not participate in. The results show that the development of grading system of Taekwondo in Hebei province, however, there are still some problems. The research of this paper provides a theoretical basis for the development of Hebei province, but also to contribute to the promotion of Taekwondo Dan made better development in Hebei province.

  15. Development of a framework for the neutorinics analysis system for next generation (2) (Contract research)

    International Nuclear Information System (INIS)

    Hirai, Yasushi; Hyoudou, Hideaki; Tatsumi, Masahiro; Jin, Tomoyuki; Yokoyama, Kenji

    2008-10-01

    Japan Atomic Energy Agency promotes development of innovative analysis methods and models in fundamental studies for next-generation nuclear reactor systems. In order to efficiently and effectively reflect the latest analysis methods and models to primary design of prototype reactor and/or in-core fuel management for power reactors, a next-generation analysis system MARBLE has been developed. The next-generation system provides solutions to the following requirements: (1) Flexibility, extensibility and user-friendliness that can apply new methods and models rapidly and effectively for fundamental studies, (2) quantitative assurance of solution accuracy and adaptive scoping range for design studies, (3) coupling analysis among different study domains for the purpose of rationalization of plant systems and improvement of reliability, (4) maintainability and reusability for system extensions for the purpose of total quality assurance and development efficiency. There has been a problem of extreme inefficiency due to lack of functionality in the conventional analysis system when changing analysis targets and/or modeling levels. In order to solve this problem, a policy of the hybrid system is adopted for the next-generation system, in which a controlling part is implemented in the scripting language with rich flexibility and maintainability and solution kernels that requires execution speed in the system language. In this study, detailed design of a framework, its implementation and tests are conducted so that a Python system layer can drive calculation codes written in C++ and/or Fortran. It is confirmed that various type of calculation codes such as diffusion, transport and burnup codes can be treated in the same manner on the platform for unified management system for calculation codes with a data exchange mechanism for abstracted data model between the Python and the calculation code layers. (author)

  16. The Use of Input-Output Control System Analysis for Sustainable Development of Multivariable Environmental Systems

    Science.gov (United States)

    Koliopoulos, T. C.; Koliopoulou, G.

    2007-10-01

    We present an input-output solution for simulating the associated behavior and optimized physical needs of an environmental system. The simulations and numerical analysis determined the accurate boundary loads and areas that were required to interact for the proper physical operation of a complicated environmental system. A case study was conducted to simulate the optimum balance of an environmental system based on an artificial intelligent multi-interacting input-output numerical scheme. The numerical results were focused on probable further environmental management techniques, with the objective of minimizing any risks and associated environmental impact to protect the quality of public health and the environment. Our conclusions allowed us to minimize the associated risks, focusing on probable cases in an emergency to protect the surrounded anthropogenic or natural environment. Therefore, the lining magnitude could be determined for any useful associated technical works to support the environmental system under examination, taking into account its particular boundary necessities and constraints.

  17. Development of advanced spent fuel management process. System analysis of advanced spent fuel management process

    International Nuclear Information System (INIS)

    Ro, S.G.; Kang, D.S.; Seo, C.S.; Lee, H.H.; Shin, Y.J.; Park, S.W.

    1999-03-01

    The system analysis of an advanced spent fuel management process to establish a non-proliferation model for the long-term spent fuel management is performed by comparing the several dry processes, such as a salt transport process, a lithium process, the IFR process developed in America, and DDP developed in Russia. In our system analysis, the non-proliferation concept is focused on the separation factor between uranium and plutonium and decontamination factors of products in each process, and the non-proliferation model for the long-term spent fuel management has finally been introduced. (Author). 29 refs., 17 tabs., 12 figs

  18. Development of a code system DEURACS for theoretical analysis and prediction of deuteron-induced reactions

    OpenAIRE

    Nakayama Shinsuke; Kouno Hiroshi; Watanabe Yukinobu; Iwamoto Osamu; Ye Tao; Ogata Kazuyuki

    2017-01-01

    We have developed an integrated code system dedicated for theoretical analysis and prediction of deuteron-induced reactions, which is called DEUteron-induced Reaction Analysis Code System (DEURACS). DEURACS consists of several calculation codes based on theoretical models to describe respective reaction mechanisms and it was successfully applied to (d,xp) and (d,xn) reactions. In the present work, the analysis of (d,xn) reactions is extended to higher incident energy up to nearly 100 MeV and ...

  19. CANDU safety analysis system establishment; development of trip coverage and multi-dimensional hydrogen analysis methodology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jong Ho; Ohn, M. Y.; Cho, C. H. [KOPEC, Taejon (Korea)

    2002-03-01

    The trip coverage analysis model requires the geometry network for primary and secondary circuit as well as the plant control system to simulate all the possible plant operating conditions throughout the plant life. The model was validated for the power maneuvering and the Wolsong 4 commissioning test. The trip coverage map was produced for the large break loss of coolant accident and the complete loss of class IV power event. The reliable multi-dimensional hydrogen analysis requires the high capability for thermal hydraulic modelling. To acquire such a basic capability and verify the applicability of GOTHIC code, the assessment of heat transfer model, hydrogen mixing and combustion model was performed. Also, the assessment methodology for flame acceleration and deflagration-to-detonation transition is established. 22 refs., 120 figs., 31 tabs. (Author)

  20. Development of high velocity gas gun with a new trigger system-numerical analysis

    Science.gov (United States)

    Husin, Z.; Homma, H.

    2018-02-01

    In development of high performance armor vests, we need to carry out well controlled experiments using bullet speed of more than 900 m/sec. After reviewing trigger systems used for high velocity gas guns, this research intends to develop a new trigger system, which can realize precise and reproducible impact tests at impact velocity of more than 900 m/sec. A new trigger system developed here is called a projectile trap. A projectile trap is placed between a reservoir and a barrel. A projectile trap has two functions of a sealing disk and triggering. Polyamidimide is selected for the trap material and dimensions of the projectile trap are determined by numerical analysis for several levels of launching pressure to change the projectile velocity. Numerical analysis results show that projectile trap designed here can operate reasonably and stresses caused during launching operation are less than material strength. It means a projectile trap can be reused for the next shooting.

  1. Application of new developments in coupled seismic analysis of piping systems

    International Nuclear Information System (INIS)

    Gupta, A.; Gupta, A.K.

    1995-01-01

    The current practice of calculating the seismic response is to perform the analysis of the primary structure (buildings) and the secondary systems (piping) separately. Earthquake input to the primary system in terms of a design response spectrum. An acceleration time history compatible with the design response spectrum is developed (a non-unique process) and primary system is analyzed to obtain the acceleration histories at the desired floors. Floor time histories are used for generating the corresponding instructure response spectrum (IRIS). The instructure response spectra are used as input at the supports of secondary systems. Further, in case of multiple supports, an envelope spectrum (introducing conservatism) is obtained from the individual support IRS. The effect of relative support motion is incorporated by a worst-case separate static analysis (adding to the conservatism). In the above method, mass interaction between the secondary and primary system is ignored, which may have significant effect at resonant frequencies (further adding to the conservatism). The calculated response may be an order of magnitude higher than they should be. Two computer programs, CREST and CREST-IRIS, were developed at Center for NUclear Power Plant Structures, Equipment and Piping. Any one of the two computer programs together with a piping analysis program can be used to perform an accurate coupled seismic analysis of piping systems. The two computer programs have been validated against the time history analysis for simple problems. In the present study, we have applied CREST to analyze two real-life piping systems. The piping analysis program used in this research is the commercial software PIPESTRESS, developed by DST Computer Services of Geneva, Switzerland. (author). 4 refs., 3 figs., 2 tabs

  2. Structuring the analysis of human concerns at an early stage of system development

    NARCIS (Netherlands)

    Belyavin, A.J.; Tyler, S.; Lotens, W.A.

    2011-01-01

    This paper describes the development of a new approach to risk analysis applied to the investigation of how inserting new technologies in systems may induce positive and negative human impacts. The current approach employed by the UK Ministry of Defence, and embodied in the Early Human Factors

  3. The Development of Professional Learning Communities and Their Teacher Leaders: An Activity Systems Analysis

    Science.gov (United States)

    Turner, Julianne C.; Christensen, Andrea; Kackar-Cam, Hayal Z.; Fulmer, Sara M.; Trucano, Meg

    2018-01-01

    Professional learning communities can be effective vehicles for teacher learning and instructional improvement, partly because they help change professional culture. However, little is known about "how" these changes occur. We used activity systems analysis to investigate the development of professional learning communities and their…

  4. Development of integrated models for energy-economy systems analysis at JAERI

    International Nuclear Information System (INIS)

    Yasukawa, Shigeru; Mankin, Shuichi; Sato, Osamu; Yonese, Hiromi

    1984-08-01

    This report, being a revision of the preprint for distribution to participants at IEA/ETSAP Workshop held, at JAERI, Tokyo, March 1984, describes the concept of the integrated models for energy-economy systems analysis now being carried out at JAERI. In this model system, there contains four different categories of computer codes. The first one is a series of computer codes named as E 3 -SD representatively, which are utilized to develop a dynamic scenario generation in a long-term energy economy evolution. The second one, of which the main constituents are the MARKAL, i.e. an optimal energy flow analizer, and the TRANS-I/O, i.e. a multi-sectoral economy analyzer, has been developed for the analysis of structural characteristics embodied in our energy-economy system. The third one is for a strategy analysis on nuclear power reactor installation and fuel cycle development, and its main constituent is the JALTES. The fourth one is for a cost-benefit-risk analysis including various kinds of data bases. As the model system being still under development, but the idea of application of it to such a problem as '' the role of the HTGR in the prospects of future energy supply'' is also explained in the report. (author)

  5. The analysis of the program to develop the nuclear waste management system

    International Nuclear Information System (INIS)

    Woods, T.W.

    1991-09-01

    This Part A of Volume 2 of the three volumes that constitute the Westinghouse Hanford Company report, The Analysis of the Program to Develop the Nuclear Waste Management System, WHC-EP-0465. Volume 2 provides an overview of the analysis of the program, describes the functional analysis methods and bases, and summarizes the results of the analysis of the Office of Civilian Radioactive Waste Management (OCRWM) Nuclear Waste Management System (NWMS) program. This volume presents the complete functional analysis results, which are composed of the following: identification of the functions and their hierarchial relationships, the definition and scope of each function, process flow diagrams that show the interrelationships of the function interfaces, and descriptions of the products produced by each function. Volume 3 identifies requirements sources and the allocated requirements for the OCRWM program and the functions to which those requirements have been allocated. References are cited in Part B of Volume 2. 5 figs

  6. International and Domestic Development Trends of Electromagnetic Transient Analysis Programs for Power Systems

    Science.gov (United States)

    Noda, Taku

    Nowadays, there is quite high demand for electromagnetic transient (EMT) analysis programs and real-time simulators for power systems. In addition to the conventional demand such as overvoltage, over-current and oscillation simulations, the new demand that includes simulations of power-electronics circuits and power quality is increasing. With this background, development groups of EMT programs and real-time simulators have made progress in terms of computational performance and user experience. In Japan, Central Research Institute of Electric Power Industry has newly developed an EMT analysis program called XTAP (eXpandable Transient Analysis Program). This article overviews these international and domestic development trends of EMT analysis programs and real-time simulators.

  7. Development of systems of analysis in industrial processes with XRF. A technology transfer alternative

    International Nuclear Information System (INIS)

    Galvez, Juan; Poblete, Victor

    1999-01-01

    The FRX Laboratory's experience in developing a unit of analysis by excitation with a radioisotope source is described, with a discussion of its advantages, limitations, types of existing units in the market, use, values and state-of-the-art. The evolution of mining and metallurgical processes has led to the development of new technologies that provide quick and precise control of control and analysis operations, avoiding loss of raw material, chemical reagents, waste of materials and time, to obtain a better quality and purer product. The system developed by the FRX Laboratory is relatively low cost compared to other equipment that is available in the market, and it focuses on single element analysis in hydrometallurgical processes. This system uses a NaI (T1) detector with a beryllium window, related electronics, monitor and printer, which controls the operation automatically using an adequate program for taking samples, measuring, analysis, printing results, changing samples, etc. The sampling is continuous, so it does not have to be taken or prepared chemically. This system can extrapolate to other more complex ones, using new kinds of detectors with higher resolution, more modern electronics, and new multichannel cards. The development of this kind of equipment in Chile means that dependence on foreign technology can be avoided by replacing expensive imported equipment, creating our own technology and transferring it to the domestic market, and even generating income by exporting these units and opening new development prospects (au)

  8. Decision analysis and risk models for land development affecting infrastructure systems.

    Science.gov (United States)

    Thekdi, Shital A; Lambert, James H

    2012-07-01

    Coordination and layering of models to identify risks in complex systems such as large-scale infrastructure of energy, water, and transportation is of current interest across application domains. Such infrastructures are increasingly vulnerable to adjacent commercial and residential land development. Land development can compromise the performance of essential infrastructure systems and increase the costs of maintaining or increasing performance. A risk-informed approach to this topic would be useful to avoid surprise, regret, and the need for costly remedies. This article develops a layering and coordination of models for risk management of land development affecting infrastructure systems. The layers are: system identification, expert elicitation, predictive modeling, comparison of investment alternatives, and implications of current decisions for future options. The modeling layers share a focus on observable factors that most contribute to volatility of land development and land use. The relevant data and expert evidence include current and forecasted growth in population and employment, conservation and preservation rules, land topography and geometries, real estate assessments, market and economic conditions, and other factors. The approach integrates to a decision framework of strategic considerations based on assessing risk, cost, and opportunity in order to prioritize needs and potential remedies that mitigate impacts of land development to the infrastructure systems. The approach is demonstrated for a 5,700-mile multimodal transportation system adjacent to 60,000 tracts of potential land development. © 2011 Society for Risk Analysis.

  9. Towards responsible system development in health services: a discourse analysis study of design conflict resolution tactics.

    Science.gov (United States)

    Irestig, Magnus; Timpka, Toomas

    2010-02-01

    We set out to examine design conflict resolution tactics used in development of large information systems for health services and to outline the design consequences for these tactics. Discourse analysis methods were applied to data collected from meetings conducted during the development of a web-based system in a public health context. We found that low risk tactics were characterized by design issues being managed within the formal mandate and competences of the design group. In comparison, high risk tactics were associated with irresponsible compromises, i.e. decisions being passed on to others or to later phases of the design process. The consequence of this collective disregard of issues such as responsibility and legitimacy is that the system design will be impossible to implement in factual health service contexts. The results imply that downstream responsibility issues have to be continuously dealt with in system development in health services.

  10. Developing a PC-based expert system for fault analysis of reactor instruments

    International Nuclear Information System (INIS)

    Diwakar, M.P.; Rathod, N.C.; Bairi, B.R.; Darbhe, M.D.; Joglekar, S.S.

    1989-01-01

    This paper describes the development of an expert system for fault analysis of electronic instruments in the CIRUS nuclear reactor. The system was developed in Prolog on an IBM PC-XT compatible computer. A 'model-based' approach (Button et al, 1986) was adopted combining 'frames' and 'rules' to provide flexible control over the inferencing mechanisms. Frames represent the domain-objects as well as the inter-object relationships. They include 'demons' or 'active values' for triggering actions. Rules, along with frames, are used for fault analysis. The rules can be activated either in a data-driven or a goal-driven manner. The use of frames makes rule management easier. It is felt that developing in-house shell proved advantageous, compared to using commercially available shells. Choosing the model-based approach was efficient compared to a production system architecture. Therefore, the use of hybrid representations for diagnostic applications is advocated. Based on the experience, some general recommendations for developing such systems are presented. The expert system helps novice operators to understand the process of diagnosis and achieve a significant required level of competence. The system may not achieve the required level of proficiency by itself, but it can be used to train operators to become experts. (author). 12 refs

  11. Development of PHilMech Computer Vision System (CVS) for Quality Analysis of Rice and Corn

    OpenAIRE

    Andres Morales Tuates jr; Aileen R. Ligisan

    2016-01-01

    Manual analysis of rice and corn is done by visually inspecting each grain and classifying according to their respective categories.  This method is subjective and tedious leading to errors in analysis.  Computer vision could be used to analyze quality of rice and corn by developing models that correlate shape and color features with various classification. The PhilMech low-cost computer vision system (CVS) was developed to analyze the quality of rice and corn.  It is composed of an ordinary ...

  12. Development of PC-based FFT system for reactor dynamic analysis

    International Nuclear Information System (INIS)

    Ansari, S.; Baig, A.R.

    1993-03-01

    A personal computer based fast fourier transform (FFT) analyzer has been developed for frequency spectrum analysis of signals from nuclear reactor. The system can perform window smoothing, computation of auto- and cross-power spectral density, coherence and auto and cross-correlation functions. The feature of 16 analogue signals acquisition with high precision and high sampling frequency makes the analyzer suitable for malfunction diagnosis of nuclear reactors using reactor noise analysis. The development work for the fourier analyzer was undertaken as a part of IAEA research contract no. 5925/RB. The applications of the FFT analyzer are described in reactor transfer function measurements and nuclear instrumentation channels frequency response testing. (author)

  13. The development of cause analysis system for CPCS trip using the rule-base deduction

    International Nuclear Information System (INIS)

    Park, Hee Seok; Kim, Dong Hoon; Seo, Ho Joon; Koo, In Soo; Park, Suk Joon

    1992-01-01

    The Core Protection Calculator System(CPCS) was developed to initiate a Reactor Trip under the circumstance of certain transients by Combustion Engineering Company. The major function of the CPCS is to generate contact outputs for the Departure from Nucleate Boiling Ratio(DNBR) Trip and Local Power Density(LPD) Trip. But in CPCS the trip causes can not be identified, only trip status is displayed. It may take much time and efforts for plant operator to analyse the trip causes of CPCS. So, the Cause Analysis System for CPCS(CASCPCS) has been developed using the rule-base deduction method to aid the operators in Nuclear Power Plant

  14. Transcriptome analysis of Nicotiana tabacum infected by Cucumber mosaic virus during systemic symptom development.

    Directory of Open Access Journals (Sweden)

    Jie Lu

    Full Text Available Virus infection of plants may induce a variety of disease symptoms. However, little is known about the molecular mechanism of systemic symptom development in infected plants. Here we performed the first next-generation sequencing study to identify gene expression changes associated with disease development in tobacco plants (Nicotiana tabacum cv. Xanthi nc induced by infection with the M strain of Cucumber mosaic virus (M-CMV. Analysis of the tobacco transcriptome by RNA-Seq identified 95,916 unigenes, 34,408 of which were new transcripts by database searches. Deep sequencing was subsequently used to compare the digital gene expression (DGE profiles of the healthy plants with the infected plants at six sequential disease development stages, including vein clearing, mosaic, severe chlorosis, partial and complete recovery, and secondary mosaic. Thousands of differentially expressed genes were identified, and KEGG pathway analysis of these genes suggested that many biological processes, such as photosynthesis, pigment metabolism and plant-pathogen interaction, were involved in systemic symptom development. Our systematic analysis provides comprehensive transcriptomic information regarding systemic symptom development in virus-infected plants. This information will help further our understanding of the detailed mechanisms of plant responses to viral infection.

  15. The analysis of wms management system: a multi case study in developer companies and users

    Directory of Open Access Journals (Sweden)

    Felipe Furlan Soriano

    2014-02-01

    Full Text Available In recent years the number of companies that use WMS on its storage operation has increased. However, a great part of organizations that adopt this system has difficulties in the implementation process or in fully exploit its resources. In this context, this research aims to analyze the WMS system, identifying the key barriers inherent in its implementation process, the benefits and features curently offered to the market, as well as the trends to the tool development. This analysis was performed through the method of multicase study under the perspective of two system developers and three users. Based on the content analysis of the informations from literature review, the semi-structered interviews and the documentary analysis performed was possible to identify as the main difficulties in the process of system implementation the flaws in registration of products and addresses, mapping of logistics processes, the staff training and cultural work change. Regarding the system benefits, stands out the better operational control and the stock accuracy improvement. Finally the trends for the tool improvement involve linking the system with tablets and smartphones, integrations with RFID technology and customized reports generation.

  16. Analysis of hydrological processes across the Northern Eurasia with recently re-developed online informational system

    Science.gov (United States)

    Shiklomanov, A. I.; Proussevitch, A. A.; Gordov, E. P.; Okladnikov, I.; Titov, A. G.

    2016-12-01

    The volume of georeferenced datasets used for hydrology and climate research is growing immensely due to recent advances in modeling, high performance computers, and sensor networks, as well as initiation of a set of large scale complex global and regional monitoring experiments. To facilitate the management and analysis of these extensive data pools we developed Web-based data management, visualization, and analysis system - RIMS - http://earthatlas.sr.unh.edu/ (Rapid Integrated Mapping and Analysis System) with a focus on hydrological applications. Recently, under collaboration with Russian colleagues from the Institute of Monitoring of Climatic and Ecological Systems SB RAS, Russia, we significantly re-designed the RIMS to include the latest Web and GIS technologies in compliance with the Open Geospatial Consortium (OGC) standards. An upgraded RIMS can be successfully applied to address multiple research problems using an extensive data archive and embedded tools for data computations, visualizations and distributions. We will demonstrate current possibility of the system providing several results of applied data analysis fulfilled for territory of the Northern Eurasia. These results will include the analysis of historical, contemporary and future changes in climate and hydrology based on station and gridded data, investigations of recent extreme hydrological events, their anomalies, causes and potential impacts, and creation and analysis of new data sets through integration of social and geophysical data.

  17. Development of a diagnostic expert system for eddy current data analysis using applied artificial intelligence methods

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyaya, B.R.; Yan, W. [Tennessee Univ., Knoxville, TN (United States). Dept. of Nuclear Engineering; Behravesh, M.M. [Electric Power Research Institute, Palo Alto, CA (United States); Henry, G. [EPRI NDE Center, Charlotte, NC (United States)

    1999-09-01

    A diagnostic expert system that integrates database management methods, artificial neural networks, and decision-making using fuzzy logic has been developed for the automation of steam generator eddy current test (ECT) data analysis. The new system, known as EDDYAI, considers the following key issues: (1) digital eddy current test data calibration, compression, and representation; (2) development of robust neural networks with low probability of misclassification for flaw depth estimation; (3) flaw detection using fuzzy logic; (4) development of an expert system for database management, compilation of a trained neural network library, and a decision module; and (5) evaluation of the integrated approach using eddy current data. The implementation to field test data includes the selection of proper feature vectors for ECT data analysis, development of a methodology for large eddy current database management, artificial neural networks for flaw depth estimation, and a fuzzy logic decision algorithm for flaw detection. A large eddy current inspection database from the Electric Power Research Institute NDE Center is being utilized in this research towards the development of an expert system for steam generator tube diagnosis. The integration of ECT data pre-processing as part of the data management, fuzzy logic flaw detection technique, and tube defect parameter estimation using artificial neural networks are the fundamental contributions of this research. (orig.)

  18. Design and development of computerized local and overall country's environmental data analysis network system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chang Gyu; Kang, Jong Gyu; Han, H.; Han, J. S.; Lee, Y. D.; Lee, S. R.; Kang, D. J.; Cho, Y. G.; Yun, S. H. [Daedeok College, Taejon (Korea, Republic of)

    2001-03-15

    In this development, we designed a integrated database for efficient data processing of radiation-environment data and developed the CLEAN (Computerized Local and overall country's Environmental data Analysis Network) system. The CLEAN system consists of local radiation-environment network, data analysis system, data open system. We developed the CLEAN system focused on building an integrated database, a data mart, and a CLEAN web site. It is expected that the developed system, which organizes the information related to environmental radiation data systematically, can be utilize for the accurate interpretation, analysis and evaluation.

  19. Safeguards systems analysis research and development and the practice of safeguards at DOE facilities

    International Nuclear Information System (INIS)

    Zack, N.R.; Thomas, K.E.; Markin, J.T.; Tape, J.W.

    1991-01-01

    Los Alamos Safeguards Systems Group personnel interact with Department of Energy (DOE) nuclear materials processing facilities in a number of ways. Among them are training courses, formal technical assistance such as developing information management or data analysis software, and informal ad hoc assistance especially in reviewing and commenting on existing facility safeguards technology and procedures. These activities are supported by the DOE Office of Safeguards and Security, DOE Operations Offices, and contractor organizations. Because of the relationships with the Operations Office and facility personnel, the Safeguards Systems Group research and development (R and D) staff have developed an understanding of the needs of the entire complex. Improved safeguards are needed in areas such as materials control activities, accountability procedures and techniques, systems analysis and evaluation methods, and material handling procedures. This paper surveys the generic needs for efficient and cost effective enhancements in safeguards technologies and procedures at DOE facilities, identifies areas where existing safeguards R and D products are being applied or could be applied, and sets a direction for future systems analysis R and D to address practical facility safeguards needs

  20. Development and Application of Subchannel Analysis Code Technology for Advanced Reactor Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Dae Hyun; Seo, K. W

    2006-01-15

    A study has been performed for the development and assessment of a subchannel analysis code which is purposed to be used for the analysis of advanced reactor conditions with various configurations of reactor core and several kinds of reactor coolant fluids. The subchannel analysis code was developed on the basis of MATRA code which is being developed at KAERI. A GUI (Graphic User Interface) system was adopted in order to reduce input error and to enhance user convenience. The subchannel code was complemented in the property calculation modules by including various fluids such as heavy liquid metal, gas, refrigerant,and supercritical water. The subchannel code was applied to calculate the local thermal hydraulic conditions inside the non-square test bundles which was employed for the analysis of CHF. The applicability of the subchannel code was evaluated for a high temperature gas cooled reactor condition and supercritical pressure conditions with water and Freon. A subchannel analysis has been conducted for European ADS(Accelerator-Driven subcritical System) with Pb-Bi coolant through the international cooperation work between KAERI and FZK, Germany. In addition, the prediction capability of the subchannel code was evaluated for the subchannel void distribution data by participating an international code benchmark program which was organized by OECD/NRC.

  1. Retrospective analysis and development prospects for the industrial waste management control systems

    Directory of Open Access Journals (Sweden)

    Vaysman Yakov Iosifovich

    Full Text Available One of the most important issues of our time is the introduction of the resource saving technologies in the manufacturing process. Development and implementation of such technologies are constrained not only by the technical development of the industry, but also by the normative legal aspects of waste production. In order to identify all the significant factors increasing the attractiveness of resource production technologies introduction, it is necessary to examine the changes in the basic principles of the waste management systems in Russia and industrialized countries. The paper presents an analysis of the development of control systems in waste production from the stage of unmanaged education and uncontrolled waste disposal to the environment before transition to resource management. The urgency of the transition to resource management strategies in the field of waste management is discussed. As the best practice waste management deals with the experience of Germany and Austria, where individual integration elements of waste management system are implemented into the overall development strategy of the territory. In particular, it suggests that it is possible to deal more effectively with the strategic objective of minimizing the use of primary resources through better use of the resource potential of waste in the process of comprehensive utilization and recycling, including the sharing of heterogeneous waste. In Russia the implementation of such practices is difficult due to the isolation of Territorial Administration from the businesses located in the area. Basing on the analysis of the systems of waste management the basic requirements for the control system of waste management were set out in order to achieve environmental targets, efficient environmental management and sustainable development of the area. Control systems in waste management must meet the following requirements: be environment-friendly (to ensure an acceptable level of

  2. Development of total systems of piping stress analysis and evaluation: ISAPPS

    International Nuclear Information System (INIS)

    Oki, Teizaburo; Koyanagi, Ryoichi; Fukuda, Masanao

    1978-01-01

    IHI has developed the systems of piping stress analysis and evaluation: ISAPPS (IHI Stress Analysis Program for Piping Systems), which are further described in this paper. In addition, the results of structural analysis and heat transfer analysis were confirmed. An example of stress evaluation in accordance with the modified ASME Code Sec. III is shown. ISAPPS consists of the following seven parts, and is designed for easy adoption of other programs by making modifications. 1. Piping design oriented language programs 2. Structural analysis programs 3. Isometric plotting programs 4. Multi-file dumping program 5. Load combination program 6. Heat transfer program 7. Stress evaluation programs As one of the examples of structural analysis programs, IHI make use of the modified SAP IV developed by the University of California. Evaluations of stresses are performed in accordance with: 1. ASME Boiler and Pressure Vessel Code, Sec. III Class 1, 2 and 3 2. ANSI Code, B31.1 and B31.3 3. MITI (Ministry of International Trade and Industry ) Code ISAPPS is very useful for design of nuclear and chemical pipings and so on. (author)

  3. Modeling and analysis of real-time and embedded systems with UML and MARTE developing cyber-physical systems

    CERN Document Server

    Selic, Bran

    2013-01-01

    Modeling and Analysis of Real-Time and Embedded Systems with UML and MARTE explains how to apply the complex MARTE standard in practical situations. This approachable reference provides a handy user guide, illustrating with numerous examples how you can use MARTE to design and develop real-time and embedded systems and software. Expert co-authors Bran Selic and Sébastien Gérard lead the team that drafted and maintain the standard and give you the tools you need apply MARTE to overcome the limitations of cyber-physical systems. The functional sophistication required of modern cyber-physical

  4. The mathematical pathogenetic factors analysis of acute inflammatory diseases development of bronchopulmonary system among infants

    Directory of Open Access Journals (Sweden)

    G. O. Lezhenko

    2017-10-01

    Full Text Available The purpose. To study the factor structure and to establish the associative interaction of pathogenetic links of acute diseases development of the bronchopulmonary system in infants.Materials and methods. The examination group consisted of 59 infants (average age 13.8 ± 1.4 months sick with acute inflammatory bronchopulmonary diseases. Also we tested the level of 25-hydroxyvitamin D (25(ОНD, vitamin D-binding protein, hBPI, cathelicidin LL-37, ß1-defensins, lactoferrin in blood serum with the help of immunoenzymometric analysis. Selection of prognostically important pathogenetic factors of acute bronchopulmonary disease among infants was conducted using ROC-analysis. The procedure for classifying objects was carried out using Hierarchical Cluster Analysis by the method of Centroid-based clustering. Results. Based on the results of the ROC-analysis were selected 15 potential predictors of the development of acute inflammatory diseases of the bronchopulmonary system among infants. The factor analysis made it possible to determine the 6 main components . The biggest influence in the development of the disease was made by "the anemia factor", "the factor of inflammation", "the maternal factor", "the vitamin D supply factor", "the immune factor" and "the phosphorus-calcium exchange factor” with a factor load of more than 0.6. The performed procedure of hierarchical cluster analysis confirmed the initial role of immuno-inflammatory components. The conclusions. The highlighted factors allowed to define a group of parameters, that must be influenced to achieve a maximum effect in carrying out preventive and therapeutic measures. First of all, it is necessary to influence the "the anemia factor" and "the calcium exchange factor", as well as the "the vitamin D supply factor". In other words, to correct vitamin D deficiency and carry out measures aimed at preventing the development of anemia. The prevention and treatment of the pathological course of

  5. Recent research development of process integration in analysis and optimisation of energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, F.X.X.; Vaideeswaran, L. [UMIST, Manchester (United Kingdom). Dept. of Process Integration

    2000-11-01

    The design of energy systems in a process plant requires a good understanding of each subsystem (e.g. processes, heat exchanger networks, utility systems),and their interactions in the context of an overall plant. An effective design method should be able to explore the synergy between the subsystems to the maximum extent and allow users to interact with the design process. To achieve this, the effective way is to combine physical insights with mathematical optimisation techniques. Physical insights are used as a wise man's brain and eyes, while optimisation techniques are employed as a superman's power in searching for optimal solutions. In the past, concepts and methods have been developed for handling grassroots design, operational management, retrofit and debottlenecking scenarios. This paper describes the recent research progress at UMIST in developing fundamental concepts and methodologies for analysis and optimisation of energy systems. (author)

  6. Developing a framework for qualitative engineering: Research in design and analysis of complex structural systems

    Science.gov (United States)

    Franck, Bruno M.

    1990-01-01

    The research is focused on automating the evaluation of complex structural systems, whether for the design of a new system or the analysis of an existing one, by developing new structural analysis techniques based on qualitative reasoning. The problem is to identify and better understand: (1) the requirements for the automation of design, and (2) the qualitative reasoning associated with the conceptual development of a complex system. The long-term objective is to develop an integrated design-risk assessment environment for the evaluation of complex structural systems. The scope of this short presentation is to describe the design and cognition components of the research. Design has received special attention in cognitive science because it is now identified as a problem solving activity that is different from other information processing tasks (1). Before an attempt can be made to automate design, a thorough understanding of the underlying design theory and methodology is needed, since the design process is, in many cases, multi-disciplinary, complex in size and motivation, and uses various reasoning processes involving different kinds of knowledge in ways which vary from one context to another. The objective is to unify all the various types of knowledge under one framework of cognition. This presentation focuses on the cognitive science framework that we are using to represent the knowledge aspects associated with the human mind's abstraction abilities and how we apply it to the engineering knowledge and engineering reasoning in design.

  7. Development and Reliability Analysis of HTR-PM Reactor Protection System

    International Nuclear Information System (INIS)

    Li Duo; Guo Chao; Xiong Huasheng

    2014-01-01

    High Temperature Gas-Cooled Reactor-Pebble bed Module (HTR-PM) digital Reactor Protection System (RPS) is a dedicated system, which is designed and developed according to HTR-PM NPP protection specifications. To decrease the probability of accident trips and increase the system reliability, HTR-PM RPS has such features as a framework of four redundant channels, two diverse sub-systems in each channel, and two level two-out-of-four logic voters. Reliability analysis of HTR-PM RPS is based on fault tree model. A fault tree is built based on HTR-PM RPS Failure Modes and Effects Analysis (FMEA), and special analysis is focused on the sub-tree of redundant channel ''2-out-of-4'' logic and the fault tree under one channel is bypassed. The qualitative analysis of fault tree, such as RPS weakness according to minimal cut sets, is summarized in the paper. (author)

  8. Development and evaluation of an observational system for goalball match analysis

    Directory of Open Access Journals (Sweden)

    Márcio Pereira Morato

    Full Text Available Abstract Our purpose was to develop and evaluate an observational system for goalball match analysis. We used a non-participant systematic game observation method including eight elite games, video recorded, and randomly chosen. Observational categories and performance indicators were determined for each offensive (i.e., ball control, attack preparation, and throwing and defensive principles (i.e., defensive balance, throw reading, and blocking. The comprehensive method of development and the ideal reliability levels (kappa coefficient of 0.81–1.00 of this protocol ensure the generation of quantitative and qualitative information for players and coaches and the rigor required for scientific use.

  9. Development and Analysis of New Integrated Energy Systems for Sustainable Buildings

    Science.gov (United States)

    Khalid, Farrukh

    Excessive consumption of fossil fuels in the residential sector and their associated negative environmental impacts bring a significant challenge to engineers within research and industrial communities throughout the world to develop more environmentally benign methods of meeting energy needs of residential sector in particular. This thesis addresses potential solutions for the issue of fossils fuel consumption in residential buildings. Three novel renewable energy based multigeneration systems are proposed for different types of residential buildings, and a comprehensive assessment of energetic and exergetic performances is given on the basis of total occupancy, energy load, and climate conditions. System 1 is a multigeneration system based on two renewable energy sources. It uses biomass and solar resources. The outputs of System 1 are electricity, space heating, cooling, and hot water. The energy and exergy efficiencies of System 1 are 91.0% and 34.9%, respectively. The results of the optimisation analysis show that the net present cost of System 1 is 2,700,496 and that the levelised cost of electricity is 0.117/kWh. System 2 is a multigeneration system, integrating three renewable energy based subsystems; wind turbine, concentrated solar collector, and Organic Rankine Cycle supplied by a ground source heat exchanger. The outputs of the System 2 are electricity, hot water, heating and cooling. The optimisation analysis shows that net present cost is 35,502 and levelised cost of electricity is 0.186/kWh. The energy and exergy efficiencies of System 2 are found to be 34.6% and 16.2%, respectively. System 3 is a multigeneration system, comprising two renewable energy subsystems-- geothermal and solar to supply power, cooling, heating, and hot water. The optimisation analysis shows that the net present cost of System 3 is 598,474, and levelised cost of electricity of 0.111/kWh. The energy and exergy efficiencies of System 3 are 20.2% and 19.2%, respectively, with

  10. The Dynamic Anaerobic Reactor & Integrated Energy System (DARIES) model: model development, validation, and sensitivity analysis.

    Science.gov (United States)

    Brouwer, A F; Grimberg, S J; Powers, S E

    2012-12-01

    The Dynamic Anaerobic Reactor & Integrated Energy System (DARIES) model has been developed as a biogas and electricity production model of a dairy farm anaerobic digester system. DARIES, which incorporates the Anaerobic Digester Model No. 1 (ADM1) and simulations of both combined heat and power (CHP) and digester heating systems, may be run in either completely mixed or plug flow reactor configurations. DARIES biogas predictions were shown to be statistically coincident with measured data from eighteen full-scale dairy operations in the northeastern United States. DARIES biogas predictions were more accurate than predictions made by the U.S. AgSTAR model FarmWare 3.4. DARIES electricity production predictions were verified against data collected by the NYSERDA DG/CHP Integrated Data System. Preliminary sensitivity analysis demonstrated that DARIES output was most sensitive to influent flow rate, chemical oxygen demand (COD), and biodegradability, and somewhat sensitive to hydraulic retention time and digester temperature.

  11. Analysis to develop a program for energy-integrated farm systems

    Energy Technology Data Exchange (ETDEWEB)

    Eakin, D.E.; Clark, M.A.; Inaba, L.K.; Johnson, K.I.

    1981-09-01

    A program to use renewable energy resources and possibly develop decentralization of energy systems for agriculture is discussed. The purpose of the research presented is to establish the objective of the program and identify guidelines for program development. The program's objective is determined by: (1) an analysis of the technologies that could be utilized to transform renewable farm resources to energy by the year 2000, (2) the quantity of renewable farm resources that are available, and (3) current energy-use patterns. Individual research, development, and demonstration projects are fit into a national program of energy-integrated farm systems on the basis of: (1) market need, (2) conversion potential, (3) technological opportunities, and (4) acceptability. Quantification of these factors for the purpose of establishing program guidelines is conducted using the following four precepts: (1) market need is identified by current use of energy for agricultural production; (2) conversion potential is determined by the availability of renewable resources; and (3) technological opportunities are determined by the state-of-the-art methods, techniques, and processes that can convert renewable resources into farm energy. Each of these factors is analyzed in Chapters 2 to 4. Chapter 5 draws on the analysis of these factors to establish the objective of the program and identify guidelines for the distribution of program funds. Chapter 6 then discusses the acceptability of integrated farm systems, which can not be quantified like the other factors.

  12. Critiques and developments in world-systems analysis: an introduction to the special collection[1

    Directory of Open Access Journals (Sweden)

    Richard E. Lee

    2010-11-01

    Full Text Available From its inception, the world-systems perspective was not onlyenormously influential in long-term, large-scale social research; it also attracted a set of serious critiques. These fell into the general areas of the emergence of the capitalist world-economy; reductionism in the mode of argument; surplus appropriation and accumulation, including the question of class; and the general exclusion of an analysis of any role for “culture.” It is concrete developments in world-systems analysis over the past three decades,although not to the exclusion of explicit responses to critiques, that have gone a long way in addressing these concerns. They fall most notably into the areas of commodity chains, households, world-ecology, and the structures of knowledge.

  13. Development of a central PC-based system for reactor signal monitoring and analysis

    International Nuclear Information System (INIS)

    Karim, A.; Ansari, S.A.; Rauf Baig, A.

    1998-01-01

    A personal computer based system was developed for on-line monitoring, signal processing and display of important reactor parameters of the Pakistan Research Reactor-1. The system was designed for assistance to both reactor operator and users. It performs three main functions. The first is the centralized radiation monitoring in and around the reactor building. The computer acquires signals from radiation monitoring channels and continuously displays them on distributed monitors. Trend monitoring and alarm generation is also done. In case of any abnormal condition the radiation level data is automatically stored in computer memory for detailed off-line analysis. In the second part the computer does the performance testing of nuclear instrumentation channels by signal statistical analysis, and generates alarm in case the channel standard deviation error exceeds the permissible error. Mean values of important nuclear signals are also displayed on distributed monitors as a part of reactor safety parameters display system. The third function is on-line computation of reactor physics parameters of the core which are important from operational and safety points-of-view. The signals from radiation protection system and nuclear instrumentation channels in the reactor were interfaced with the computer for this purpose. The development work was done under an IAEA research contract as a part of coordinated research programme. (author)

  14. [Reverse genetics system of rotaviruses: development and application for analysis of VP4 spike protein].

    Science.gov (United States)

    Komoto, Satoshi

    2013-01-01

    The rotavirus genome is composed of 11 gene segments of double-stranded (ds)RNA. Reverse genetics is the powerful and ideal methodology for the molecular analysis of virus biology, which enables the virus genome to be artificially manipulated. Although reverse genetics systems exist for nearly all major groups of RNA viruses, development of such a system for rotaviruses is more challenging owing in part to the technical complexity of manipulation of their multi-segmented genome. A breakthrough in the field of rotavirus reverse genetics came in 2006, when we established the first reverse genetics system for rotaviruses, which is a partially plasmid-based system that permits replacement of a viral gene segment with the aid of a helper virus. Although this helper virus-driven system is technically limited and gives low levels of recombinant viruses, it allows alteration of the rotavirus genome, thus contributing to our understanding of these medically important viruses. In this review, I describe the development and application of our rotavirus reverse genetics system, and its future perspectives.

  15. Analysis and Development of Emergency Management Information System for Railway Systems in Taiwan

    OpenAIRE

    CHEN, C.C.; TSAI, M.R.; TSAI, Y.J.; CHI, W.C.; CHIU, Y.L.; SHEU, S.K.; CHEN, I.C.

    2012-01-01

    Railway is one of the most efficient, convenient, and comfortable ways with maximum mobility to meet people. Railway accidents or disasters often cause delays and service interruptions, resulting in operational and other loss. Despite many railway systems in Taiwan having a variety of monitoring systems for natural disasters, they still need an efficient platform for the emergency management of disasters and accidents since time and efficiency are the keys to emergency management. This study ...

  16. Development and Analysis of Group Contribution Plus Models for Property Prediction of Organic Chemical Systems

    DEFF Research Database (Denmark)

    Mustaffa, Azizul Azri

    been developed where the atom interaction parameters (AIPs) are obtained through regression against both VLE and SLE experimental data. The prediction accuracy of SLE systems using the regressed parameters has been slightly increased. Besides that, in Chapter 6, Modified (Dortmund) UNIFAC-CI has been...... parameters (GIPs) are obtained by fitting phase equilibrium data. There are, however many gaps in the UNIFAC parameter table due to lack of data. Alternative to performing measurements, which may not be feasible, values of the missing GIPs, can be predicted through the GCPlus approach. The predicted values...... is presented in Chapter 3. Furthermore in Chapter 4, as a continuation of the analysis done for systems involving C, H and O atoms, the Original UNIFAC-CI (VLE) model has been further reused and significantly expanded by including nitrogenated, chlorinated and sulfurated systems and the involved atom...

  17. Strengthening systems for integrated early childhood development services: a cross-national analysis of governance.

    Science.gov (United States)

    Britto, Pia Rebello; Yoshikawa, Hirokazu; van Ravens, Jan; Ponguta, Liliana Angelica; Reyes, Maria; Oh, Soojin; Dimaya, Roland; Nieto, Ana María; Seder, Richard

    2014-01-01

    While there has been substantial growth in early childhood development (ECD) services in low- and middle-income countries (LMICs), there is considerable inequity in their distribution and quality. Evidence-based governance strategies are necessary, but currently they are insufficient for widespread, quality implementation. In particular, there is a limited understanding of the use of systems approaches for the analysis of ECD services as they go to scale. The aim of this paper is to present findings from four countries, using a cross-national case study approach to explore governance mechanisms required to strengthen national systems of ECD services. While different sets of governance strategies and challenges were identified in each country, overarching themes also emerged with implications for systems strengthening. Study results focus on local, mid-level and central governance, with recommendations for effective coordination and the integration of ECD services in LMICs. © 2014 New York Academy of Sciences.

  18. The Role of Systems Modeling for Sustainable Development Policy Analysis: the Case of Bio-Ethanol

    Directory of Open Access Journals (Sweden)

    Albert W. Chan

    2004-12-01

    Full Text Available A dynamic systems modeling technique has been developed to assess technologies according to the criterion of sustainability. In a case study, the potential contribution of bio-ethanol toward achieving Canada's commitment to the Kyoto targets for greenhouse gas reductions is analyzed. The analysis concludes that, although bio-ethanol may help reduce greenhouse gas emissions, the technology by itself is insufficient to meet the Kyoto target. Applying the systems modeling approach to analyze sustainability helps highlight those policy issues that warrant more in-depth study. Although the systems model may not provide definitive answers, it raises relevant questions about physical constraints that might be encountered and estimates the extent to which sustainability targets may be met under various scenarios.

  19. Preliminary analysis of West Valley Waste Removal System equipment development and mock demonstration facilities

    International Nuclear Information System (INIS)

    Janicek, G.P.

    1981-06-01

    This report defines seven areas requiring further investigation to develop and demonstrate a safe and viable West Valley Waste Removal System. These areas of endeavor are discussed in terms of their minimum facility requirements. It is concluded that utilizing separated specific facilities at different points in time is of a greater advantage than an exact duplication of the West Valley tanks. Savannah River Plant's full-scale, full-circle and half-circle tanks, and their twelfth scale model tank would all be useful to varying degrees but would require modifications. Hanford's proposed full-size mock tank would be useful, but is not seriously considered because its construction may not coincide with West Valley needs. Costs of modifying existing facilities and/or constructing new facilities are assessed in terms of their benefit to the equipment development and mock demonstration. Six facilities were identified for further analysis which would benefit development of waste removal equipment

  20. Development of SNS Stream Analysis Based on Forest Disaster Warning Information Service System

    Science.gov (United States)

    Oh, J.; KIM, D.; Kang, M.; Woo, C.; Kim, D.; Seo, J.; Lee, C.; Yoon, H.; Heon, S.

    2017-12-01

    Forest disasters, such as landslides and wildfires, cause huge economic losses and casualties, and the cost of recovery is increasing every year. While forest disaster mitigation technologies have been focused on the development of prevention and response technologies, they are now required to evolve into evacuation and border evacuation, and to develop technologies fused with ICT. In this study, we analyze the SNS (Social Network Service) stream and implement a system to detect the message that the forest disaster occurred or the forest disaster, and search the keyword related to the forest disaster in advance in real time. It is possible to detect more accurate forest disaster messages by repeatedly learning the retrieved results using machine learning techniques. To do this, we designed and implemented a system based on Hadoop and Spark, a distributed parallel processing platform, to handle Twitter stream messages that open SNS. In order to develop the technology to notify the information of forest disaster risk, a linkage of technology such as CBS (Cell Broadcasting System) based on mobile communication, internet-based civil defense siren, SNS and the legal and institutional issues for applying these technologies are examined. And the protocol of the forest disaster warning information service system that can deliver the SNS analysis result was developed. As a result, it was possible to grasp real-time forest disaster situation by real-time big data analysis of SNS that occurred during forest disasters. In addition, we confirmed that it is possible to rapidly propagate alarm or warning according to the disaster situation by using the function of the forest disaster warning information notification service. However, the limitation of system application due to the restriction of opening and sharing of SNS data currently in service and the disclosure of personal information remains a problem to be solved in the future. Keyword : SNS stream, Big data, Machine

  1. Development of a system code for transient analysis in a HTGR

    International Nuclear Information System (INIS)

    Lee, Tae Beom

    2004-02-01

    A GAMMA (GAs Multi-component Multi-dimensional Analysis) code is developed for transient analysis and air ingress analysis in High Temperature Gas-cooled Reactors (HTGR). The PBMR of ESKOM is selected as a reference plant for the High Temperature Gas-cooled Reactor here, which uses a direct helium cycle and pebble fuel. Physical models included in GAMMA are the pebble conduction model, radiation heat transfer model, point kinetics model, decay heat model, and component models for break flow, valve, pump, cooler, power conversion unit model. The temperature distribution and the flow distribution of the PBMR are calculated for initial and accident core in the present study. In the accident analysis, typical design basis accident (DBA), including the load transient accident and depressurization accident into the system are selected and analyzed in detail. The predictions by GAMMA for PBMR at 100% power are compared with those by VSOP and PBR S IM. It turns out that the temperature in the upper region in the third channel predicted by GAMMA is about 62 .deg. C at maximum higher than that by VSOP, but is pretty close to that by PBR S IM. The center temperature of the fuel shows that that predicted by considering swelling effect is higher than that without swelling effect by about 10 .deg. C. The net efficiency of direct system is higher than that of indirect system due to an effect of the circulator power. The transient capability of GAMMA is validated through analytical solution and PBR S IM analyzing the depressurization (Loss Of Coolant Accident, LOCA) and load transient accident. After the LOCA the system pressure decreases dramatically from 8MPa to 0.4MPa within 2 sec. After the PI (Proportional-plus-Integral) controller senses that the power shaft is over the set-point of 3,600 rpm, the bypass valve makes shaft speed back to the set-point

  2. Infrared surface analysis using a newly developed thin-sample preparation system.

    Science.gov (United States)

    Nagai, Naoto; Nishiyama, Itsuo; Kishima, Yoshio; Iida, Katsuhiko; Mori, Koichi

    2009-01-01

    We developed a new sampling system, the Nano Catcher, for measuring the surface chemical structure of polymers or industrial products and we evaluated the performance of the system. The system can directly pick up surface species whose depth is on the order of approximately 100 nm and can easily provide a sample for a Fourier transform infrared (FT-IR) system without the necessity of passing it over to a measurement plate. The FT-IR reflection data obtained from the Nano Catcher were compared with those obtained using the attenuated total reflection (ATR) method and sampling by hand. Chemical structural analysis of a depth region from a few tens of nanometers to a few hundred nanometers can be directly performed using this system. Such depths are beyond the scope of conventional X-ray photoelectron spectroscopy (XPS) and ATR methods. We can expect the use of the Nano Catcher system to lead to a great improvement in the detection of signals of surface species in these depth regions.

  3. Systems genomics analysis centered on epigenetic inheritance supports development of a unified theory of biology.

    Science.gov (United States)

    Sharma, Abhay

    2015-11-01

    New discoveries are increasingly demanding integration of epigenetics, molecular biology, genomic networks and physiology with evolution. This article provides a proof of concept for evolutionary transgenerational systems biology, proposed recently in the context of epigenetic inheritance in mammals. Gene set enrichment analysis of available genome-level mammalian data presented here seem consistent with the concept that: (1) heritable information about environmental effects in somatic cells is communicated to the germline by circulating microRNAs (miRNAs) or other RNAs released in physiological fluids; (2) epigenetic factors including miRNA-like small RNAs, DNA methylation and histone modifications are propagated across generations via gene networks; and (3) inherited epigenetic variations in the form of methylated cytosines are fixed in the population as thymines over the evolutionary time course. The analysis supports integration of physiology and epigenetics with inheritance and evolution. This may catalyze efforts to develop a unified theory of biology. © 2015. Published by The Company of Biologists Ltd.

  4. Branch analysis in the context of evolutionary development of economic systems

    Directory of Open Access Journals (Sweden)

    Margarita Izraylevna Berkovich

    2014-03-01

    Full Text Available Upgrading of Russian economy claims special attention to long-term problems of its development in order to make it stable and purposeful. The necessity to improve social and economic parameters and comprehensive innovation development of territorial economic systems requires elaboration of sound policy and regions’ strategies in relation to regional branches that form their potential. The article proposes an approach to reform national economic sectors on the basis of their life cycle analysis and allocation of functional features of a single mesoeconomic system. The research is aimed at selecting key parameters of sectors’ development at the regional level. The evolutionary approach that serves as the basis for the methodology gives an opportunity to determine the factors that have the greatest impact on life cycle dynamics. The article singles out the following main groups of factors: resources, product, technology, market, banking sector, public policy. By analyzing life cycles of the Yaroslavl region’s chemical industries (synthetic rubber and carbon black production it is concluded that the only way to ensure sustainable development of branches lies in the continuous implementation of innovations, a process affected by cyclicity and determined by factors of exogenous and endogenous nature

  5. Mobile systems development

    DEFF Research Database (Denmark)

    Pedersen, Ole; Kristiansen, Martin Lund; Kammersgaard, Marc N.

    2007-01-01

    Development of mobile software is Surrounded by much uncertainty. Immature software platforms on mobile clients, a highly competitive market calling for innovation, efficiency and effectiveness in the development life cycle, and lacking end-user adoption are just some of the realities facing...... development teams in the mobile software industry. By taking a process view on development of mobile systems we seek to explore the strengths and limitations of eXtreme Programming (XP) in the context of mobile software development. Following an experimental approach a mobile systems development project...... running for four months is conducted. Experiences from the project are used for analysis and discussion of the fit of XP in mobile systems development. First, requirements for mobile systems development projects are proposed. Second, these are analysed and compared to the prescribed principles suggested...

  6. Data Integration and Analysis System (DIAS) Contributing to the Sustainable Development Goals (SDGs)

    Science.gov (United States)

    Koike, T.

    2014-12-01

    It has been said that scientists and experts usually use 80% of their research time for data management (DOE, 2002). Only 20% of research time is used for purely scientific activities. This ratio should be reversed by introducing computer science technology. To realize this goal, the Japanese government supported the development of a data system called "Data Integration and Analysis System (DIAS)," as one of the national key projects promoted by the Council for Science and Technology Policy (CSTP) from 2006 to 2010. A follow-up 5-year project is also ongoing. The essential aim for the DIAS was to create knowledge that would enable solutions to problems and generate socioeconomic benefits. DIAS mainly consists of four data components including data injection, management, integration, and interoperability. DIAS is now tackling a large increase in the diversity and volume of data from observing the Earth. Dictionaries have been developing an ontology system for technical and geographical terms, and a metadata design has been completed according to international standards. The volume of data stored has exponentially increased. Previously, almost all of the large-volume data came from satellites, but model outputs occupy the largest volume of our data storage nowadays. In collaboration with scientific and technological groups, DIAS can accelerate data archiving by including data loading, quality checking, metadata registration, and our system data-searching capability is being enriched. DIAS also enables us to perform integrated research and realize interdisciplinarity. Essentially, we are now working in the fields of climate, water resources, food, fisheries, and biodiversity by collaborating between different disciplines and trying to develop bases of contribution to Sustainable Development Goals (SDGs).

  7. METHODS AND MODELS FOR ANALYSIS OF THE ORGANIZATIONAL ECONOMICS ACTIVITY USED FOR DEVELOPMENT OF INFORMATICS SYSTEMS

    Directory of Open Access Journals (Sweden)

    TEODORA VĂTUIU

    2014-10-01

    Full Text Available Study of organizational activity and highlighting problem situations that require specific solutions, require a detailed analysis of the models defined for the real system of the economic companies, regarded not as a sum of assets, but as organizations in which there are activities related into processes. In addition to the usual approach of using modeling languages in the development of information systems, in this paper we intend to present some examples that demonstrate the usefulness of a standard modeling language (UML to analyze organizational activities and to report problem situations that may occur in data management registered on primary documents or in processes that bring together activities. Examples that have been focused on a travel agency can be extrapolated to any other organization, and the diagrams can be used in different contexts, depending on the complexity of the activities identified.

  8. The Environment-Power System Analysis Tool development program. [for spacecraft power supplies

    Science.gov (United States)

    Jongeward, Gary A.; Kuharski, Robert A.; Kennedy, Eric M.; Wilcox, Katherine G.; Stevens, N. John; Putnam, Rand M.; Roche, James C.

    1989-01-01

    The Environment Power System Analysis Tool (EPSAT) is being developed to provide engineers with the ability to assess the effects of a broad range of environmental interactions on space power systems. A unique user-interface-data-dictionary code architecture oversees a collection of existing and future environmental modeling codes (e.g., neutral density) and physical interaction models (e.g., sheath ionization). The user-interface presents the engineer with tables, graphs, and plots which, under supervision of the data dictionary, are automatically updated in response to parameter change. EPSAT thus provides the engineer with a comprehensive and responsive environmental assessment tool and the scientist with a framework into which new environmental or physical models can be easily incorporated.

  9. Development of an Automated LIBS Analytical Test System Integrated with Component Control and Spectrum Analysis Capabilities

    International Nuclear Information System (INIS)

    Ding Yu; Tian Di; Chen Feipeng; Chen Pengfei; Qiao Shujun; Yang Guang; Li Chunsheng

    2015-01-01

    The present paper proposes an automated Laser-Induced Breakdown Spectroscopy (LIBS) analytical test system, which consists of a LIBS measurement and control platform based on a modular design concept, and a LIBS qualitative spectrum analysis software and is developed in C#. The platform provides flexible interfacing and automated control; it is compatible with different manufacturer component models and is constructed in modularized form for easy expandability. During peak identification, a more robust peak identification method with improved stability in peak identification has been achieved by applying additional smoothing on the slope obtained by calculation before peak identification. For the purpose of element identification, an improved main lines analysis method, which detects all elements on the spectral peak to avoid omission of certain elements without strong spectral lines, is applied to element identification in the tested LIBS samples. This method also increases the identification speed. In this paper, actual applications have been carried out. According to tests, the analytical test system is compatible with components of various models made by different manufacturers. It can automatically control components to get experimental data and conduct filtering, peak identification and qualitative analysis, etc. on spectral data. (paper)

  10. Development of web-GIS system for analysis of georeferenced geophysical data

    Science.gov (United States)

    Okladnikov, I.; Gordov, E. P.; Titov, A. G.; Bogomolov, V. Y.; Genina, E.; Martynova, Y.; Shulgina, T. M.

    2012-12-01

    Georeferenced datasets (meteorological databases, modeling and reanalysis results, remote sensing products, etc.) are currently actively used in numerous applications including modeling, interpretation and forecast of climatic and ecosystem changes for various spatial and temporal scales. Due to inherent heterogeneity of environmental datasets as well as their huge size which might constitute up to tens terabytes for a single dataset at present studies in the area of climate and environmental change require a special software support. A dedicated web-GIS information-computational system for analysis of georeferenced climatological and meteorological data has been created. The information-computational system consists of 4 basic parts: computational kernel developed using GNU Data Language (GDL), a set of PHP-controllers run within specialized web-portal, JavaScript class libraries for development of typical components of web mapping application graphical user interface (GUI) based on AJAX technology, and an archive of geophysical datasets. Computational kernel comprises of a number of dedicated modules for querying and extraction of data, mathematical and statistical data analysis, visualization, and preparing output files in geoTIFF and netCDF format containing processing results. Specialized web-portal consists of a web-server Apache, complying OGC standards Geoserver software which is used as a base for presenting cartographical information over the Web, and a set of PHP-controllers implementing web-mapping application logic and governing computational kernel. JavaScript libraries aiming at graphical user interface development are based on GeoExt library combining ExtJS Framework and OpenLayers software. The archive of geophysical data consists of a number of structured environmental datasets represented by data files in netCDF, HDF, GRIB, ESRI Shapefile formats. For processing by the system are available: two editions of NCEP/NCAR Reanalysis, JMA/CRIEPI JRA-25

  11. Development of an induction motor abnormality monitoring system(IMAMS) using power line signal analysis

    International Nuclear Information System (INIS)

    Jung, Jae Cheon

    1997-02-01

    An induction motor abnormality monitoring system using power line signal analysis is developed in this work. Various studies have focused their attention on the detection of particular harmonic frequencies produced from each defect mode of motors. However, these harmonic frequencies are valuable only when the motor has a continuous slip frequency and operate in constant torque/load condition. The basic concept of the system developed in this work is to detect the characteristic harmonic frequencies occurred when the motor is in abnormal state and to compare it with a predetermined setpoint. Based on these analyses, the place and degree of defect can be easily identified. The experimental results under test bench simulation are also introduced. To find out an alternative way to obtain a threshold level independent of slip/torque, with the rotating field theory, the ratio between harmonic current and total current was calculated with the simplified circuit that is equivalent to two abnormal cases, such as the spatial rotor resistance variation and the symmetrical components changes with field. Also, the threshold level calculation was done with performed the rotating field theory. The results show that they are in good agreement with a experimental results. Further studies are undertaken to extend this work to the on-line monitoring and diagnostic system with a likelihood ratio test method for field application

  12. Development of a High Fidelity System Analysis Code for Generation IV Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hongbin Zhang; Vincent Mousseau; Haihua Zhao

    2008-06-01

    Traditional nuclear reactor system analysis codes such as RELAP and TRAC employ an operator split methodology. In this approach, each of the physics (fluid flow, heat conduction and neutron diffusion) is solved separately and the coupling terms are done explicitly. This approach limits accuracy (first order in time at best) and makes the codes slow in running since the explicit coupling imposes stability restrictions on the time step size. These codes have been extensively tested and validated for the existing LWRs. However, for GEN IV nuclear reactor designs which tend to have long lasting transients resulting from passive safety systems, the performance is questionable and modern high fidelity simulation tools will be required. The requirement for accurate predictability is the motivation for a large scale overhaul of all of the models and assumptions in transient nuclear reactor safety simulation software. At INL we have launched an effort with the long term goal of developing a high fidelity system analysis code that employs modern physical models, numerical methods, and computer science for transient safety analysis of GEN IV nuclear reactors. Modern parallel solution algorithms will be employed through utilizing the nonlinear solution software package PETSc developed by Argonne National Laboratory. The physical models to be developed will have physically realistic length scales and time scales. The solution algorithm will be based on the physics-based preconditioned Jacobian-free Newton-Krylov solution methods. In this approach all of the physical models are solved implicitly and simultaneously in a single nonlinear system. This includes the coolant flow, nonlinear heat conduction, neutron kinetics, and thermal radiation, etc. Including modern physical models and accurate space and time discretizations will allow the simulation capability to be second order accurate in space and in time. This paper presents the current status of the development efforts as

  13. Development of system analysis code for thermal-hydraulic simulation of integral reactor, Rex-10

    International Nuclear Information System (INIS)

    Lee, Y. G.; Kim, J. W.; Yoon, S. J.; Park, G. C.

    2010-10-01

    Rex-10 is an environment-friendly and economical small-scale nuclear reactor to provide the energy for district heating as well as the electric power in micro-grid. This integral reactor comprises several innovative concepts supported by advanced primary circuit components, low coolant parameters and natural circulation cooling. To evaluate the system performance and thermal-hydraulic behavior of the reactor, a system analysis code is being developed so that the new designs and technologies adopted in Rex-10 can be reflected. The research efforts are absorbed in programming the simple and fast-running thermal-hydraulic analysis software. The details of hydrodynamic governing equations component models and numerical solution scheme used in this code are presented in this paper. On the basis of one-dimensional momentum integral model, the models of point reactor neutron kinetics for thorium-fueled core, physical processes in the steam-gas pressurizer, and heat transfers in helically coiled steam generator are implemented to the system code. Implicit numerical scheme is employed to momentum and energy equations to assure the numerical stability. The accuracy of simulation is validated by applying the solution method to the Rex-10 test facility. Calculated natural circulation flow rate and coolant temperature at steady-state are compared to the experimental data. The validation is also carried out for the transients in which the sudden reduction in the core power or the feedwater flow takes place. The code's capability to predict the steady-state flow by natural convection and the qualitative behaviour of the primary system in the transients is confirmed. (Author)

  14. Development of system analysis code for thermal-hydraulic simulation of integral reactor, Rex-10

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-10-15

    Rex-10 is an environment-friendly and economical small-scale nuclear reactor to provide the energy for district heating as well as the electric power in micro-grid. This integral reactor comprises several innovative concepts supported by advanced primary circuit components, low coolant parameters and natural circulation cooling. To evaluate the system performance and thermal-hydraulic behavior of the reactor, a system analysis code is being developed so that the new designs and technologies adopted in Rex-10 can be reflected. The research efforts are absorbed in programming the simple and fast-running thermal-hydraulic analysis software. The details of hydrodynamic governing equations component models and numerical solution scheme used in this code are presented in this paper. On the basis of one-dimensional momentum integral model, the models of point reactor neutron kinetics for thorium-fueled core, physical processes in the steam-gas pressurizer, and heat transfers in helically coiled steam generator are implemented to the system code. Implicit numerical scheme is employed to momentum and energy equations to assure the numerical stability. The accuracy of simulation is validated by applying the solution method to the Rex-10 test facility. Calculated natural circulation flow rate and coolant temperature at steady-state are compared to the experimental data. The validation is also carried out for the transients in which the sudden reduction in the core power or the feedwater flow takes place. The code's capability to predict the steady-state flow by natural convection and the qualitative behaviour of the primary system in the transients is confirmed. (Author)

  15. Development of high time resolution measurement system of frequency characteristics in bioelectrical impedance for biodynamic analysis

    Science.gov (United States)

    Nakamura, Takao; Kusuhara, Toshimasa; Yamamoto, Yoshitake

    2006-11-01

    We have proposed biodynamic analysis using bioelectrical impedance at 50 kHz, which is measured with synchronous rectification method. In order to analyze impedance parameters in biodynamics, the measurement of frequency characteristics in bioelectrical impedance with a high time resolution are required. Therefore we have developed a high time resolution measurement system for bioelectrical impedance with 10 frequency points and time resolution of 1 ms. A voltage E A, which consisted of fundamental wave and 9 kinds of harmonic wave from 1 kHz to 1MHz, were converted to current. The current flowed through human body and a potential voltage, EV was detected in the measured part. After A/D conversion of EV and E A in the sampling frequency 2 MHz, data number 2048 points, the impedance were calculated using Fast Fourier Transform. The measured time 1.024 ms was the period of the fundamental wave and time resolution of this system. The specification is enough accuracy for measurement of bioelectrical impedance for biodynamic analysis.

  16. Greenlandic water and sanitation-a context oriented analysis of system challenges towards local sustainable development

    DEFF Research Database (Denmark)

    Hendriksen, Kåre; Hoffmann, Birgitte

    2017-01-01

    Today, as Greenland focuses on more economic and cultural autonomy, the continued development of societal infrastructure systems is vital. At the same time, pressure is put on the systems by a lack of financial resources and locally based professional competences as well as new market-based forms...... for developing the water and sanitation system to support not only hygiene and health, but also local sustainable development....

  17. Current development in data acquision and processing system for reactor noise analysis in PUSPATI

    International Nuclear Information System (INIS)

    Mohamad Amin Sharifuldin Salleh.

    1986-11-01

    A data acquisition and processing system for reactor noise analysis is described. It consists of four-channel isolation amplifier, a seven-channel DC amplifier, a four-channel analog to digital converter, analog filters, a microcomputer system and a plotter. This system is being applied to investigate the reactor dynamics of the PUSPATI TRIGA MK II reactor. (author)

  18. Development of COMPAS, computer aided process flowsheet design and analysis system of nuclear fuel reprocessing

    International Nuclear Information System (INIS)

    Homma, Shunji; Sakamoto, Susumu; Takanashi, Mitsuhiro; Nammo, Akihiko; Satoh, Yoshihiro; Soejima, Takayuki; Koga, Jiro; Matsumoto, Shiro

    1995-01-01

    A computer aided process flowsheet design and analysis system, COMPAS has been developed in order to carry out the flowsheet calculation on the process flow diagram of nuclear fuel reprocessing. All of equipments, such as dissolver, mixer-settler, and so on, in the process flowsheet diagram are graphically visualized as icon on a bitmap display of UNIX workstation. Drawing of a flowsheet can be carried out easily by the mouse operation. Not only a published numerical simulation code but also a user's original one can be used on the COMPAS. Specifications of the equipment and the concentration of components in the stream displayed as tables can be edited by a computer user. Results of calculation can be also displayed graphically. Two examples show that the COMPAS is applicable to decide operating conditions of Purex process and to analyze extraction behavior in a mixer-settler extractor. (author)

  19. System Design and Development of a Robotic Device for Automated Venipuncture and Diagnostic Blood Cell Analysis.

    Science.gov (United States)

    Balter, Max L; Chen, Alvin I; Fromholtz, Alex; Gorshkov, Alex; Maguire, Tim J; Yarmush, Martin L

    2016-10-01

    Diagnostic blood testing is the most prevalent medical procedure performed in the world and forms the cornerstone of modern health care delivery. Yet blood tests are still predominantly carried out in centralized labs using large-volume samples acquired by manual venipuncture, and no end-to-end solution from blood draw to sample analysis exists today. Our group is developing a platform device that merges robotic phlebotomy with automated diagnostics to rapidly deliver patient information at the site of the blood draw. The system couples an image-guided venipuncture robot, designed to address the challenges of routine venous access, with a centrifuge-based blood analyzer to obtain quantitative measurements of hematology. In this paper, we first present the system design and architecture of the integrated device. We then perform a series of in vitro experiments to evaluate the cannulation accuracy of the system on blood vessel phantoms. Next, we assess the effects of vessel diameter, needle gauge, flow rate, and viscosity on the rate of sample collection. Finally, we demonstrate proof-of-concept of a white cell assay on the blood analyzer using in vitro human samples spiked with fluorescently labeled microbeads.

  20. Development of a web based monitoring system for safety and activity analysis in operating theatres.

    Science.gov (United States)

    Frosini, Francesco; Miniati, Roberto; Avezzano, Paolo; Cecconi, Giulio; Dori, Fabrizio; Gentili, Guido Biffi; Belardinelli, Andrea

    2016-01-01

    The management and the monitoring of the operating rooms on the part of the general management have the objective of optimizing their use and maximizing the internal safety. The expenses owed to their safe use represent, besides reimbursements coming from the surgical activity, important factors for the analysis of the medical facility. Given that it is not possible to reduce the safety, it is necessary to develop supporting systems with the aim to enhance and optimize the use of the rooms. The developed analysis model of the operating rooms in this study is based on the specific performance indicators and allows the effective monitoring of both the parameters that influence the safety (environmental, microbiological parameters) and those that influence the efficiency of the usage (employment rate, delays, necessary formalities, etc.). This allows you to have a systematic dashboard on hand for all of the OTs and, thus, organize the intervention schedules and more appropriate improvements. A monitoring dashboard has been achieved, accessible from any platform and any device, capable of aggregating hospital information. The undertaken organizational modifications, through the use of the dashboard, have allowed for an average annual savings of 29.52 minutes per intervention and increase the use of the ORs of 5%. The increment of the employment rate and the optimization of the operating room have allowed for savings of around $299,88 for every intervention carried out in 2013, corresponding to an annual savings of $343,362,60. Integration dashboards, as the one proposed in this study as a prototype, represent a governance model of economically sustainable healthcare systems capable of guiding the hospital management in the choices and in the implementation of the most efficient organizational modifications.

  1. Fundamental analysis and algorithms for development of a mobile fast-scan lateral migration radiography system

    Science.gov (United States)

    Su, Zhong

    developed and applied to acquired images to eliminate the undesirable effects. The images acquired with this system also have the general characteristics of LMR images: (1) displacement of object image center from the true object center exists for subsurface objects in the collimated detector images; (2) shadowing effects occur for objects that protrude above the scanned surface; (3) scanned objects with air volumes present greater contrast in the acquired images than those without air volumes. Image processing and object recognition algorithms are developed and applied to the LMR images to enhance the image quality, to remove surface clutter, and to obtain depth information of subsurface objects. The physical analysis of the x-ray beam rotating collimator and the development of the corresponding mobile fast-scan LMR system and its image acquisition and processing algorithms show that LMR is a proven technique for fast, mobile object surface and subsurface examination.

  2. Engineering task plan for development, fabrication, and deployment of nested, fixed depth fluidic sampling and at-tank analysis systems

    International Nuclear Information System (INIS)

    REICH, F.R.

    1999-01-01

    An engineering task plan was developed that presents the resources, responsibilities, and schedules for the development, test, and deployment of the nested, fixed-depth fluidic sampling and at-tank analysis system. The sampling system, deployed in the privatization contract double-shell tank feed tank, will provide waste samples for assuring the readiness of the tank for shipment to the privatization contractor for vitrification. The at-tank analysis system will provide ''real-time'' assessments of the sampled wastes' chemical and physical properties. These systems support the Hanford Phase 1B Privatization Contract

  3. An Analysis of Specific Contracting Issues Regarding the Development and Acquisition of Expert Systems

    Science.gov (United States)

    1990-12-01

    application of the system, the latest technology may not necessarily be the best alternative. Mr. Francisco J. Cantu-Ortiz, of the Instituto Tecnologico y...expert system development process is important, however, an" should be required throughout the process. A recommended approach is that of a " Progress ...Notebook" that would entail a "historic trace" of the entire expert system development process. The " Progress Notebook" would tend to "fill in the

  4. Development of a portable ESPI system for the analysis in situ of mural paintings

    Science.gov (United States)

    Boaglio, E.; Lamas, J.; López, Ana J.; Ramil, A.; Pereira, L.; Prieto, B.; Silva, B.

    2012-10-01

    The use of Electronic Speckle Pattern Interferometry (ESPI) is well documented in the literature as a non-destructive technique for structural diagnostics in the field of cultural heritage.. In the case of mural paintings the lack of adhesion between the plaster and the mural support is one of the most important risk factors that threaten their conservation. With this non-invasive method it is possible to detect detachments and cracks in the paintings before they become visible The objective of this work is the development of ESPI portable equipment based on a fibre interferometer for in situ qualitative analysis of mural paintings. The novelty of the presented set up is the use of a variable ratio coupler which makes the system more immune to vibrations and allows for better use of available light compared with the equivalent of free air guided. This configuration simplifies the arrangement and makes it possible to obtain ESPI interferograms with high contrast; moreover, the use of a ceramic heater as excitation source enables the analysis during the heating. Preliminary results obtained in laboratory conditions have shown that detachments and cracks can be successfully detected on model samples of the wall paintings.

  5. Development of advanced nuclear core analysis system applicable to various reactor types (II)

    International Nuclear Information System (INIS)

    Kaneko, Kunio

    2003-03-01

    A 900 group cross section library based on the specification determined last year was produced for 27 nuclei of the fast reactor benchmark problem evaluated in nuclear data file JENDL-3.2. In addition, the new SLAROM code, which has been developed as an advanced detail analysis system, was revised so as to make cell calculations effectively with the above 900 group library. Furthermore, new functions were added to the SLAROM so that the SLAROM evaluates assembly parameters using effective cross sections derived by the SLAROM and produces any condensed effective cross section set for core performance analysis. With the 900 group cross section library and the revised SALROM, three cell calculations for fast and medium neutron speed reactors having different neutron spectrum were performed, and the results were compared with those calculated by the continuos energy Monte Carlo code MVP. By the comparisons, it is concluded that the newly revised SLAROM and a 900 group cross section library give accuracy comparable to MVP for predicting core performances. (author)

  6. The Development Of Mathematical Model For Automated Fingerprint Identification Systems Analysis

    International Nuclear Information System (INIS)

    Ardisasmita, M. Syamsa

    2001-01-01

    Fingerprint has a strong oriented and periodic structure composed of dark lines of raised skin (ridges) and clear lines of lowered skin (furrows)that twist to form a distinct pattern. Although the manner in which the ridges flow is distinctive, other characteristics of the fingerprint called m inutiae a re what are most unique to the individual. These features are particular patterns consisting of terminations or bifurcations of the ridges. To assert if two fingerprints are from the same finger or not, experts detect those minutiae. AFIS (Automated Fingerprint Identification Systems) extract and compare these features for determining a match. The classic methods of fingerprints recognition are not suitable for direct implementation in form of computer algorithms. The creation of a finger's model was however the necessity of development of new, better algorithms of analysis. This paper presents a new numerical methods of fingerprints' simulation based on mathematical model of arrangement of dermatoglyphics and creation of minutiae. This paper describes also the design and implementation of an automated fingerprint identification systems which operates in two stages: minutiae extraction and minutiae matching

  7. Analysis and selection of data models when developing computer-aided design systems

    OpenAIRE

    Fisun, Mykola T.; Davydenko, Yevhen O.

    2014-01-01

    The features of description of the subject matters of computer-aided design systems by means of relational, object and multi-dimensional models of the control systems for data bases are studied. The illustrated example of description of elementary geometry shapes shows the advantages of the object data model using the method of hierarchy analysis.

  8. Features of development and analysis of the simulation model of a multiprocessor computer system

    Directory of Open Access Journals (Sweden)

    O. M. Brekhov

    2017-01-01

    Full Text Available Over the past decade, multiprocessor systems have been applied in computer technology. At present,multi-core processors are equipped not only with supercomputers, but also with the vast majority of mobile devices. This creates the need for students to learn the basic principles of their construction and functioning.One of the possible methods for analyzing the operation of multiprocessor systems is simulation modeling.Its use contributes to a better understanding of the effect of workload and structure parameters on performance. The article considers the features of the development of the simulation model for estimating the time characteristics of a multiprocessor computer system, as well as the use of the regenerative method of model analysis. The characteristics of the software implementation of the inverse kinematics solution of the robot are adopted as a workload. The given task consists in definition of turns in joints of the manipulator on known angular and linear position of its grasp. An analytical algorithm for solving the problem was chosen, namely, the method of simple kinematic relations. The work of the program is characterized by the presence of parallel calculations, during which resource conflicts arise between the processor cores, involved in simultaneous access to the memory via a common bus. In connection with the high information connectivity between parallel running programs, it is assumed that all processing cores use shared memory. The simulation model takes into account probabilistic memory accesses and tracks emerging queues to shared resources. The collected statistics reveal the productive and overhead time costs for the program implementation for each processor core involved. The simulation results show the unevenness of kernel utilization, downtime in queues to shared resources and temporary losses while waiting for other cores due to information dependencies. The results of the simulation are estimated by the

  9. On the development of an interactive resource information management system for analysis and display of spatiotemporal data

    Science.gov (United States)

    Schell, J. A.

    1974-01-01

    The recent availability of timely synoptic earth imagery from the Earth Resources Technology Satellites (ERTS) provides a wealth of information for the monitoring and management of vital natural resources. Formal language definitions and syntax interpretation algorithms were adapted to provide a flexible, computer information system for the maintenance of resource interpretation of imagery. These techniques are incorporated, together with image analysis functions, into an Interactive Resource Information Management and Analysis System, IRIMAS, which is implemented on a Texas Instruments 980A minicomputer system augmented with a dynamic color display for image presentation. A demonstration of system usage and recommendations for further system development are also included.

  10. Development of a Sequential Injection Analysis System for the Determination of Saccharin

    Directory of Open Access Journals (Sweden)

    Budi Wibowotomo

    2017-12-01

    Full Text Available Saccharin is a powerfully sweet nonnutritive sweetener that has been approved for food-processing applications within the range of 100–1200 mg/kg. A simple, rapid, and cost-effective sequential injection analysis (SIA technique was developed to determine the saccharin level. This method is based on the reaction of saccharin with p-chloranil in an ethanol medium with a hydrogen peroxide (H2O2 acceleration, and the resultant violet-red compound was detected using a UV-Vis spectrophotometer at λmax = 420 nm. To ascertain the optimal conditions for the SIA system, several parameters were investigated, including buffer flow rate and volume, p-chloranil concentration, and reactant volumes (saccharin, p-chloranil, and H2O2. The optimum setup of the SIA system was achieved with a buffer flow rate, buffer volume, and draw-up time of 1.2 mL/min, 2900 µL, and ~145 s, respectively. The optimal p-chloranil concentration is 30 mM, and the best reactant volumes, presented in an ordered sequence, are as follows: 30 µL of H2O2, 450 µL of saccharin, and 150 µL of p-chloranil. The optimized SIA configuration produced a good linear calibration curve with a correlation coefficient (R2 = 0.9812 in the concentration range of 20–140 mg/L and with a detection limit of 19.69 mg/L. Analytical applications in different food categories also showed acceptable recovery values in the range of 93.1–111.5%. This simple and rapid SIA system offers great feasibility for the saccharin quality control in food-product processing.

  11. Development of a Sequential Injection Analysis System for the Determination of Saccharin.

    Science.gov (United States)

    Wibowotomo, Budi; Eun, Jong-Bang; Rhee, Jong Il

    2017-12-12

    Saccharin is a powerfully sweet nonnutritive sweetener that has been approved for food-processing applications within the range of 100-1200 mg/kg. A simple, rapid, and cost-effective sequential injection analysis (SIA) technique was developed to determine the saccharin level. This method is based on the reaction of saccharin with p-chloranil in an ethanol medium with a hydrogen peroxide (H₂O₂) acceleration, and the resultant violet-red compound was detected using a UV-Vis spectrophotometer at λ max = 420 nm. To ascertain the optimal conditions for the SIA system, several parameters were investigated, including buffer flow rate and volume, p-chloranil concentration, and reactant volumes (saccharin, p-chloranil, and H₂O₂). The optimum setup of the SIA system was achieved with a buffer flow rate, buffer volume, and draw-up time of 1.2 mL/min, 2900 µL, and ~145 s, respectively. The optimal p-chloranil concentration is 30 mM, and the best reactant volumes, presented in an ordered sequence, are as follows: 30 µL of H₂O₂, 450 µL of saccharin, and 150 µL of p-chloranil. The optimized SIA configuration produced a good linear calibration curve with a correlation coefficient (R² = 0.9812) in the concentration range of 20-140 mg/L and with a detection limit of 19.69 mg/L. Analytical applications in different food categories also showed acceptable recovery values in the range of 93.1-111.5%. This simple and rapid SIA system offers great feasibility for the saccharin quality control in food-product processing.

  12. Developing a Self-Report-Based Sequential Analysis Method for Educational Technology Systems: A Process-Based Usability Evaluation

    Science.gov (United States)

    Lin, Yi-Chun; Hsieh, Ya-Hui; Hou, Huei-Tse

    2015-01-01

    The development of a usability evaluation method for educational systems or applications, called the self-report-based sequential analysis, is described herein. The method aims to extend the current practice by proposing self-report-based sequential analysis as a new usability method, which integrates the advantages of self-report in survey…

  13. XM982 155-mm Artillery Projectile Container Support System: Finite-Element Model Development and Analysis

    National Research Council Canada - National Science Library

    Minnicino, Michael

    2005-01-01

    ... such as supplementing insensitive munition capabilities. The development of a finite-element (FE) model is a valitable tool for investigating design modifications to the container-foam support system without the need for expensive experimental tests...

  14. Development of a software system for spatial resolved trace analysis of high performance materials with SIMS

    International Nuclear Information System (INIS)

    Brunner, Ch. H.

    1997-09-01

    The following work is separated into two distinctly different parts. The first one is dealing with the SIMSScan software project, an application system for secondary ion mass spectrometry. This application system primarily lays down the foundation, for the research activity introduced in the second part of this work. SIMSScan is an application system designed to provide data acquisition routines for different requirements in the field of secondary ion mass spectroscopy. The whole application package is divided into three major sections, each one dealing with specific measurement tasks. Various supporting clients and wizards, providing extended functionality to the main application, build the core of the software. The MassScan as well as the DepthScan module incorporate the SIMS in the direct imaging or stigmatic mode and are featuring the capabilities for mass spectra recording or depth profile analysis. In combination with an image recording facility the DepthScan module features the capability of spatial resolved material analysis - 3D SIMS. The RasterScan module incorporates the SIMS in scanning mode and supports an fiber optical link for optimized data transfer. The primary goal of this work is to introduce the basic ideas behind the implementation of the main application modules and the supporting clients. Furthermore, it is the intention to lay down the foundation for further developments. At the beginning a short introduction into the paradigm of object oriented programming as well as Windows TM programming is given. Besides explaining the basic ideas behind the Doc/View application architecture the focus is mainly shifted to the routines controlling the SIMS hardware and the basic concepts of multithreaded programming. The elementary structures of the view and document objects is discussed in detail only for the MassScan module, because the ideas behind data abstraction and encapsulation are quite similar. The second part introduces the research activities

  15. Decentralized supply of electricity is a favorable development. Analysis of system options and effects

    International Nuclear Information System (INIS)

    Faber, A.; Ros, J.; De Boer-Meulman, P.; In 't Groen, B.

    2010-01-01

    Decentralised electricity systems can provide a significant contribution to the development of environment-friendly techniques such as solar power and electric vehicles. However, there are also some obstacles and uncertainties. Not only does the balancing of supply and demand constitute an important challenge; the development of smart grids is also crucial to the improvement of reliability and system efficiency of the decentralized grids. Especially the distribution of investment costs is a decisive factor for the success rate of decentralized electricity systems. What is more, it is still uncertain whether an extensive decentralized system would have a higher score in cleanliness, affordability and reliability than a future central system. The system variants can be distinguished based on the deployment of six possible energy technologies for the future: PV (solar power), micro-CHP, small-scale wind energy in the built environment (urban wind), heat pumps, electric vehicles and air-conditioning. [nl

  16. Development and analysis of sustainable energy systems for building HVAC applications

    International Nuclear Information System (INIS)

    Khalid, F.; Dincer, I.; Rosen, M.A.

    2015-01-01

    The main HVAC applications considered in this paper are heating and cooling. Three newly developed systems for heating and cooling applications in buildings are proposed and assessed. Energy and exergy analyses are performed to assess the performance of heating, cooling and overall systems for each case, and the effects of various parameters on the energy and exergy efficiencies are examined. Also, the effect of changing the energy input for each system is also found in terms of overall efficiency. The overall system energy efficiency is found to be highest for the natural gas operated system with a vapour absorption chiller (system 1) at 27.5% and lowest for the photovoltaic (PV) and solar thermal operated system with vapour compression chiller (system 3) at 19.9%. The overall system exergy efficiency is found to be highest for the PV and solar thermal operated system with vapour compression chiller (system 3) at 3.9% and lowest for the PV and solar thermal operated system with heat pump (system 2) at 1.2%, respectively. - Highlights: • Three HVAC systems for buildings using renewable energy sources are proposed and assessed. • A performance improvement study is undertaken. • Parametric studies are carried out to determine the effects of various parameters on energy and exergy efficiencies

  17. A Comparative Analysis of Training and Development and Work-Family Education Systems in a Large Corporate Organization

    Science.gov (United States)

    Gibson, Sharon K.

    2005-01-01

    This paper reviews the findings of a comparative analysis of two education systems in one corporate organization: training and development and work-family. Key learning features across these systems were analyzed to determine similarities and differences and to identify common concerns. The findings indicated that, although this organization…

  18. Development of a Notational Analysis System for Selected Soccer Skills of a Women's College Team

    Science.gov (United States)

    Thomas, Camille; Fellingham, Gilbert; Vehrs, Pat

    2009-01-01

    The purposes of this study were to develop a notational system to evaluate passing, dribbling, first touch, and individual defensive skills as they relate to success during women's soccer games and to develop a statistical model to weigh the importance of each skill on creating scoring opportunities. Sequences of skills in ten games of a National…

  19. Comparative Analysis of OECD Member Countries' Competitive Advantage in National Human Resource Development System

    Science.gov (United States)

    Oh, Hunseok; Choi, Yeseul; Choi, Myungweon

    2013-01-01

    The purpose of this study was to assess, evaluate, and compare the competitive advantages of the human resource development systems of advanced countries. The Global Human Resource Development Index was utilized for this study, since it has been validated through an expert panel's content review and analytic hierarchy process. Using a sample of 34…

  20. TECHNIQUES AND SYSTEMS OF INDICATORS USED IN THE ANALYSIS OF SUSTAINABLE DEVELOPMENT OF RURAL AREAS

    Directory of Open Access Journals (Sweden)

    Sabina VITALIA

    2013-01-01

    Full Text Available The present article exposes the summary of a research project whose purpose is measuring sustainable development in Romania at the level of rural areas. Sustainable Development (Sustainable Development in English means better quality of life now and for future generations. According to the vision of sustainable development, progress integrates immediate and long-term objectives, local actions and global economic and environmental issues, all of which are inseparable. Such a vision of society can not be imposed only by political, society as a whole must adopt certain principles (political, economic, social, thinking. Sustainable development can be defined simply as a better quality of life for everyone, both now and for future generations. Sustainable development means: balanced and equitable economic development; high levels of employment, social cohesion and inclusion; a high level of environmental protection and responsible use of natural resources; generating a coherent political system open, transparent and accountable; effective international cooperation to promote global sustainable development (Gothenburg Strategy, 2001.

  1. Engineering Task Plan for Development and Fabrication and Deployment of a mobile, variable depth sampling At-Tank Analysis Systems

    International Nuclear Information System (INIS)

    BOGER, R.M.

    2000-01-01

    This engineering task plan identifies the resources, responsibilities, and schedules for the development and deployment of a mobile, variable depth sampling system and an at-tank analysis system. The mobile, variable depth sampling system concept was developed after a cost assessment indicated a high cost for multiple deployments of the nested, fixed-depth sampling system. The sampling will provide double-shell tank (DST) staging tank waste samples for assuring the readiness of the waste for shipment to the LAW/HLW plant for treatment and immobilization. The at-tank analysis system will provide ''real-time'' assessments of the samples' chemical and physical properties. These systems support the Hanford Phase 1B vitrification project

  2. Development of an Optical Fiber Sensor Interrogation System for Vibration Analysis

    Directory of Open Access Journals (Sweden)

    Alfredo Lamberti

    2016-01-01

    Full Text Available Since the introduction of dynamic optical fiber sensor interrogation systems on the market it has become possible to perform vibration measurements at frequencies up to a few kHz. Nevertheless, the use of these sensors in vibration analysis has not become a standard practice yet. This is mainly caused by the fact that interrogators are stand-alone systems which focus on strain measurements while other types of signals are also required for vibration analysis (e.g., force signals. In this paper, we present a fiber Bragg grating (FBG interrogation system that enables accurate strain measurement simultaneously with other signals (e.g., excitation forces. The system is based on a Vertical Cavity Surface Emitting Laser (VCSEL and can easily be assembled with relatively low-cost off-the-shelf components. Dynamic measurements up to a few tens of kHz with a dynamic precision of around 3 nanostrain per square-root Hz can be performed. We evaluate the proposed system on two measurement examples: a steel beam with FBG sensors glued on top and a composite test specimen with a fiber sensor integrated within the material. We show that in the latter case the results of the interrogation system are superior in quality compared to a state-of-the-art commercially available interrogation system.

  3. Nuclear Hybrid Energy Systems Initial Integrated Case Study Development and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Greenwood, Michael Scott [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-12-01

    The US Department of Energy Office of Nuclear Energy established the Nuclear Hybrid Energy System (NHES) project to develop a systematic, rigorous, technically accurate set of methods to model, analyze, and optimize the integration of dispatchable nuclear, fossil, and electric storage with an industrial customer. Ideally, the optimized integration of these systems will provide economic and operational benefits to the overall system compared to independent operation, and it will enhance the stability and responsiveness of the grid as intermittent, nondispatchable, renewable resources provide a greater share of grid power.

  4. Implementation & Analysis of Integrated Utility System in Developing Nation like India

    Directory of Open Access Journals (Sweden)

    Rajan Gupta

    2016-07-01

    Full Text Available Public utility systems are prevalent around the world but are struggling in developing nations like India to work efficiently. Integration of different utilities can be a possible solution on the technology front, so that more requests can be handled with lesser problems. This study provides the implementation design and benefits of an already proposed integration system by the same authors. It is found that Data Storage, Access Time, Transaction Cost, security cost and server’s busy time can become more effective if the implementation of integration system can be put in place. The working prototype is based on three utilities (Gas, Power & Water of Delhi-NCR, India.

  5. Development of a System for the Analysis of Hydrocarbons Different to the Methane in Air

    International Nuclear Information System (INIS)

    Rodriguez Harrison, F. A.

    2001-01-01

    In the air there are more than 3000 organic compounds produced by the natural emissions and anthropoid-genetics. Many of these organic compounds are saturated and unsaturated hydrocarbons; the volcanoes and the plants emit some, while others are emitted for the industrial processes and for the mobile sources. The hydrocarbons play a very important role in the Atmospheric Chemistry, since they take place through their oxidation a series of substances that affect the living beings, they sensitize the human being, producing him illnesses and they contribute to alter the climate of the planet. A sampling method by adsorption about cartridges that contained Tenax, Carbopack B, and molecular sieve, and a system for the analysis of hydrocarbons in the air for thermal desertion and cryogenic concentration was developed with the purpose of identifying and quantifying the hydrocarbons different to the methane present in the winds that travel San Jose Central Valley, Costa Rica. The effect of the ozone in these determinations was studied by taking samples with destroyer of ozone made with iodize of potassium and comparing them with samples taken without the destroyer. The samples were taken simultaneously between April 20 and 29 1999 in 3 sampling stations located in the northwest side of the Volcano Irazu, in Escazu and in Turrucares. There were eleven hydrocarbons being among the most abundant anthropoid-genetics the isooctane (among 34 y 149 μg/m 3 ) and etilbenceno while (among 13 y 231 μg/m 3 ), while the one α-pineno (among 25 y 153 μg/m 3 ), β-pineno (among 60 y 192 μg/m 3 ) y el limoneno (among 34 y 244 μg/m 3 ). It was also found that the ozone didn't affect the concentrations of the unsaturated hydrocarbons in the cartridges, since there were not significant differences in the concentrations of the measured hydrocarbons when the destroyer of ozone was used. (Author) [es

  6. Development of platform to compare different wall heat transfer packages for system analysis codes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min-Gil; Lee, Won Woong; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of); Shin, Sung Gil [Hanyang University, Seoul (Korea, Republic of)

    2016-10-15

    System thermal hydraulic (STH) analysis code is used for analyzing and evaluating the safety of a designed nuclear system. The system thermal hydraulic analysis code typically solves mass, momentum and energy conservation equations for multiple phases with sets of selected empirical constitutive equations to close the problem. Several STH codes are utilized in academia, industry and regulators, such as MARS-KS, SPACE, RELAP5, COBRA-TF, TRACE, and so on. Each system thermal hydraulic code consists of different sets of governing equations and correlations. However, the packages and sets of correlations of each code are not compared quantitatively yet. Wall heat transfer mode transition maps of SPACE and MARS-KS have a little difference for the transition from wall nucleate heat transfer mode to wall film heat transfer mode. Both codes have the same heat transfer packages and correlations in most region except for wall film heat transfer mode. Most of heat transfer coefficients calculated for the range of selected variables of SPACE are the same with those of MARS-KS. For the intervals between 500K and 540K of wall temperature, MARS-KS selects the wall film heat transfer mode and Bromley correlation but SPACE select the wall nucleate heat transfer mode and Chen correlation. This is because the transition from nucleate boiling to film boiling of MARS-KS is earlier than SPACE. More detailed analysis of the heat transfer package and flow regime package will be followed in the near future.

  7. Development of platform to compare different wall heat transfer packages for system analysis codes

    International Nuclear Information System (INIS)

    Kim, Min-Gil; Lee, Won Woong; Lee, Jeong Ik; Shin, Sung Gil

    2016-01-01

    System thermal hydraulic (STH) analysis code is used for analyzing and evaluating the safety of a designed nuclear system. The system thermal hydraulic analysis code typically solves mass, momentum and energy conservation equations for multiple phases with sets of selected empirical constitutive equations to close the problem. Several STH codes are utilized in academia, industry and regulators, such as MARS-KS, SPACE, RELAP5, COBRA-TF, TRACE, and so on. Each system thermal hydraulic code consists of different sets of governing equations and correlations. However, the packages and sets of correlations of each code are not compared quantitatively yet. Wall heat transfer mode transition maps of SPACE and MARS-KS have a little difference for the transition from wall nucleate heat transfer mode to wall film heat transfer mode. Both codes have the same heat transfer packages and correlations in most region except for wall film heat transfer mode. Most of heat transfer coefficients calculated for the range of selected variables of SPACE are the same with those of MARS-KS. For the intervals between 500K and 540K of wall temperature, MARS-KS selects the wall film heat transfer mode and Bromley correlation but SPACE select the wall nucleate heat transfer mode and Chen correlation. This is because the transition from nucleate boiling to film boiling of MARS-KS is earlier than SPACE. More detailed analysis of the heat transfer package and flow regime package will be followed in the near future

  8. Requirements Analysis Study for Master Pump Shutdown System Project Development Specification [SEC 1 and 2

    International Nuclear Information System (INIS)

    BEVINS, R.R.

    2000-01-01

    This document has been updated during the definitive design portion of the first phase of the W-314 Project to capture additional software requirements and is planned to be updated during the second phase of the W-314 Project to cover the second phase of the Project's scope. The objective is to provide requirement traceability by recording the analysis/basis for the functional descriptions of the master pump shutdown system. This document identifies the sources of the requirements and/or how these were derived. Each requirement is validated either by quoting the source or an analysis process involving the required functionality, performance characteristics, operations input or engineering judgment

  9. Requirements Analysis Study for Master Pump Shutdown System Project Development Specification [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    BEVINS, R.R.

    2000-03-24

    This document has been updated during the definitive design portion of the first phase of the W-314 Project to capture additional software requirements and is planned to be updated during the second phase of the W-314 Project to cover the second phase of the Project's scope. The objective is to provide requirement traceability by recording the analysis/basis for the functional descriptions of the master pump shutdown system. This document identifies the sources of the requirements and/or how these were derived. Each requirement is validated either by quoting the source or an analysis process involving the required functionality, performance characteristics, operations input or engineering judgment.

  10. Sobol Sensitivity Analysis: A Tool to Guide the Development and Evaluation of Systems Pharmacology Models

    Science.gov (United States)

    Trame, MN; Lesko, LJ

    2015-01-01

    A systems pharmacology model typically integrates pharmacokinetic, biochemical network, and systems biology concepts into a unifying approach. It typically consists of a large number of parameters and reaction species that are interlinked based upon the underlying (patho)physiology and the mechanism of drug action. The more complex these models are, the greater the challenge of reliably identifying and estimating respective model parameters. Global sensitivity analysis provides an innovative tool that can meet this challenge. CPT Pharmacometrics Syst. Pharmacol. (2015) 4, 69–79; doi:10.1002/psp4.6; published online 25 February 2015 PMID:27548289

  11. Development of a natural gas systems analysis model (GSAM). Annual report, July 1996--July 1997

    International Nuclear Information System (INIS)

    1997-01-01

    The objective of GSAM development is to create a comprehensive, non-proprietary, microcomputer model of the North American natural gas system. GSAM explicitly evaluates the key components of the system, including the resource base, exploration and development practices, extraction technology performance and costs, project economics, transportation costs and restrictions, storage, and end-use. The primary focus is the detailed characterization of the resource base at the reservoir and subreservoir level. This disaggregation allows direct evaluation of alternative extraction technologies based on discretely estimated, individual well productivity, required investments, and associated operating costs. GSAM's design allows users to evaluate complex interactions of current and alternative future technology and policy initiatives as they directly impact the gas market. GSAM development has been ongoing for the past five years. Key activities completed during the past year are described

  12. Development of a natural gas systems analysis model (GSAM). Annual report, July 1996--July 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The objective of GSAM development is to create a comprehensive, non-proprietary, microcomputer model of the North American natural gas system. GSAM explicitly evaluates the key components of the system, including the resource base, exploration and development practices, extraction technology performance and costs, project economics, transportation costs and restrictions, storage, and end-use. The primary focus is the detailed characterization of the resource base at the reservoir and subreservoir level. This disaggregation allows direct evaluation of alternative extraction technologies based on discretely estimated, individual well productivity, required investments, and associated operating costs. GSAM`s design allows users to evaluate complex interactions of current and alternative future technology and policy initiatives as they directly impact the gas market. GSAM development has been ongoing for the past five years. Key activities completed during the past year are described.

  13. Function analysis of nuclear power plants for developing of man-machine interface system for Korean next generation reactor

    International Nuclear Information System (INIS)

    Goo, In Soo; Kim, Jang Yyul; Kim, Jung Soo; Kim, Chang Hoi; Na, Nan Joo; Park, Keun Ok; Park, Won Man; Park, Jae Chang; Suh, Sang Moon; Oh, In Suk; Lee, Dong Young; Lee, Yong Hee; Cha, Kyung Ho; Chun, Se Woo; Hur, Sup; Jung, Kyung Hoon; Park, Yeon Sik; Lee, Bum Joo

    1995-02-01

    In this study, we developed the methodology and implementation plant of function analysis and performed function analysis, which is one of the major activities for the development of Man-Machine Interface System of the KNGR. Identifying the functions of existing plants followed by structuring the functions, we established functions structured at the conceptual and middle levels. This structure was further checked if it would satisfy regulatory requirements and developed to include the aspects of plant performance and other plant features to emphasize its practicality for the application to the design. (Author) 13 refs., 8 figs., 4 tabs

  14. Function analysis of nuclear power plants for developing of man-machine interface system for Korean next generation reactor

    Energy Technology Data Exchange (ETDEWEB)

    Goo, In Soo; Kim, Jang Yyul; Kim, Jung Soo; Kim, Chang Hoi; Na, Nan Joo; Park, Keun Ok; Park, Won Man; Park, Jae Chang; Suh, Sang Moon; Oh, In Suk; Lee, Dong Young; Lee, Yong Hee; Cha, Kyung Ho; Chun, Se Woo; Hur, Sup [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Jung, Kyung Hoon [Korea Electric Power Co., Seoul (Korea, Republic of); Park, Yeon Sik; Lee, Bum Joo [Korea Power Engineering Company, Inc., Seoul (Korea, Republic of)

    1995-02-01

    In this study, we developed the methodology and implementation plant of function analysis and performed function analysis, which is one of the major activities for the development of Man-Machine Interface System of the KNGR. Identifying the functions of existing plants followed by structuring the functions, we established functions structured at the conceptual and middle levels. This structure was further checked if it would satisfy regulatory requirements and developed to include the aspects of plant performance and other plant features to emphasize its practicality for the application to the design. (Author) 13 refs., 8 figs., 4 tabs.

  15. Simulation and development of a multi-leg homogeniser concentrating assembly for concentrated photovoltaic (CPV) system with electrical rating analysis

    International Nuclear Information System (INIS)

    Burhan, Muhammad; Chua, Kian Jon Ernest; Ng, Kim Choon

    2016-01-01

    Highlights: • Novel multi-leg homogeniser concentrating assembly is developed for CPV system. • Single set of concentrator, concentrates sunlight on 4 MJCs with 1° acceptance angle. • The system performance is analyzed through experiment and ray tracing simulation. • Mini two axis solar tracker, with high tracking accuracy, is developed and tested. • Electrical rating analysis accurately estimates CPV system performance in any region. - Abstract: Concentrated photovoltaic (CPV) system utilizing multi-junction solar cells, is the main focus for current research, offering highest efficiency among all photovoltaic systems. The main aspect of CPV system is the design and performance of concentrating assembly, as it determines the performance of whole CPV system. However, the conventional design of CPV concentrating assembly dedicates one concentrator for each solar cell, in which single concentrator is capable to concentrate solar radiation onto single solar cell. This paper proposes a novel concentrating assembly for CPV system, which is designed to concentrate solar radiation onto four multi-junction solar cells with a single set of concentrators. The proposed design not only can reduce the number of concentrators and assembly efforts for CPV systems, but also achieved an acceptance angle of 1°. In this paper, the proposed multi-leg homogeniser CPV concentrating assembly is designed, developed, experimentally tested and verified through ray tracing simulation. The paper also discuss the development of mini, precise and accurate but cost effective two axis solar tracker for CPV system, which can be installed at any location even at rooftop of residential buildings, unlike conventional large scale CPV systems. Moreover, through the electrical rating analysis of the developed CPV system, its performance can be accurately estimated in any region.

  16. Development of user interface to support automatic program generation of nuclear power plant analysis by module-based simulation system

    International Nuclear Information System (INIS)

    Yoshikawa, Hidekazu; Mizutani, Naoki; Nakaya, Ken-ichiro; Wakabayashi, Jiro

    1988-01-01

    Module-based Simulation System (MSS) has been developed to realize a new software work environment enabling versatile dynamic simulation of a complex nuclear power system flexibly. The MSS makes full use of modern software technology to replace a large fraction of human software works in complex, large-scale program development by computer automation. Fundamental methods utilized in MSS and developmental study on human interface system SESS-1 to help users in generating integrated simulation programs automatically are summarized as follows: (1) To enhance usability and 'communality' of program resources, the basic mathematical models of common usage in nuclear power plant analysis are programed as 'modules' and stored in a module library. The information on usage of individual modules are stored in module database with easy registration, update and retrieval by the interactive management system. (2) Target simulation programs and the input/output files are automatically generated with simple block-wise languages by a precompiler system for module integration purpose. (3) Working time for program development and analysis in an example study of an LMFBR plant thermal-hydraulic transient analysis was demonstrated to be remarkably shortened, with the introduction of an interface system SESS-1 developed as an automatic program generation environment. (author)

  17. Development, Demonstration, and Analysis of an Integrated Iodine Hall Thruster Feed System

    Science.gov (United States)

    Polzin, Kurt A.; Peeples, Steven R.; Burt, Adam O.; Martin, Adam K.; Martinez, Armando; Seixal, Joao F.; Mauro, Stephanie

    2016-01-01

    The design of an in-space iodine-vapor-fed Hall effect thruster propellant management system is described. The solid-iodine propellant tank has unique issues associated with the microgravity environment, requiring a solution where the iodine is maintained in intimate thermal contact with the heated tank walls. The flow control valves required alterations from earlier iterations to survive for extended periods of time in the corrosive iodine-vapor environment. Materials have been selected for the entire feed system that can chemically resist the iodine vapor, with the design now featuring Hastelloy or Inconel for almost all the wetted components. An integrated iodine feed system/Hall thruster demonstration unit was fabricated and tested, with all control being handled by an onboard electronics card specifically designed to operate the feed system. Structural analysis shows that the feed system can survive launch loads after the implementation of some minor reinforcement. Flow modeling, while still requiring significant additional validation, is presented to show its potential in capturing the behavior of components in this low-flow, low-pressure system.

  18. Towards the Development of a Methodology for the Cyber Security Analysis of Safety Related Nuclear Digital I and C Systems

    International Nuclear Information System (INIS)

    Khand, Parvaiz Ahmed; Seong, Poong Hyun

    2007-01-01

    In nuclear power plants the redundant safety related systems are designed to take automatic action to prevent and mitigate accident conditions if the operators and the non-safety systems fail to maintain the plant within normal operating conditions. In case of an event, the failure of these systems has catastrophic consequences. The tendency in the industry over the past 10 years has been to use of commercial of the shelf (COTS) technologies in these systems. COTS software was written with attention to function and performance rather than security. COTS hardware usually designed to fail safe, but security vulnerabilities could be exploited by an attacker to disable the fail safe mechanisms. Moreover, the use of open protocols and operating systems in these technologies make the plants to become vulnerable to a host of cyber attacks. An effective security analysis process is required during all life cycle phases of these systems in order to ensure the security from cyber attacks. We are developing a methodology for the cyber security analysis of safety related nuclear digital I and C Systems. This methodology will cover all phases of development, operation and maintenance processes of software life cycle. In this paper, we will present a security analysis process for the concept stage of software development life cycle

  19. Infrastructure of Baltic Region Transmission System: Analysis of Technical and Economic Factors of its Development

    Science.gov (United States)

    Obushevs, A.; Oleinikova, I.; Mutule, A.

    2014-08-01

    The operational conditions of new networks dictate new requirements for the transmission planning, which would include the electricity market figures and a sizable involvement of renewable generation. This paper focuses on the transmission expansion planning techniques based on the calculations of optimal power flows and on the concept of development planning and sustainability. A description is given for the mathematical model of calculations and analysis of transmission system. The results have shown that the Baltic transmission system infrastructure can successfully be analyzed based on the proposed methodology and developed mathematical model Baltijas valstu (Latvijas, Lietuvas un Igaunijas) energosistēmas ir cieši saistītas vēsturiski, un to darbība nav iespējama bez savstarpējas sadarbības attīstības un darba režīmu jautājumos. Ekonomisko attiecību īstenošanu enerģētikas sektorā paātrināja elektroenerģijas tirgus attīstība. Baltijas valstu enerģētikas politika ir integrēta ES enerģētikas stratēģijas sastāvdaļa, nosakot trīs galvenos mērķus: enerģētikas nozares konkurētspēja, ilgtspējīga attīstība un drošība. Visas trīs Baltijas energosistēmas veica lielu darba apjomu iekārtu modernizācijā un standartu saskaņošanā, kuras ir saskaņā ar Eiropas Savienības prasībām, kā arī par tirgus attiecību un tehnoloģiju standartu ieviešanu, lai nodrošinātu energoapgādes drošību un elektroenerģijas pieejamību patērētājiem Tomēr, ņemot vērā strauji mainīgos ārējos apstākļus, it īpaši ģeopolitiskos faktorus, Baltijas valstu enerģētikas politika būtu jāizskata ar mērķi novērtēt, kā šie faktori ietekmē energosistēmas ilgtspējīgu attīstību kopumā. No iepriekš minētā izriet, ka nepieciešama jauna nacionāla enerģētikas stratēģija, kura stiprinātu efektīvu ekonomisko un sociālo pamatu ilgtspējīgu attīstību Baltijas valstu nacionālā ekonomikā. Šī darba m

  20. On the development of an integrated mechanical analysis system applied to PWR nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Leroux, J.C.

    1986-01-01

    A general data base has been developed in order to handle any data used in the mechanical design. This data base required the development of a DBMS, based on an extended network scheme or navigational scheme, which allows the creation of any data base configuration defined by a Data Base Description Language. It is written in Fortran 5 Language and generates a Data Manipulation Language in standard Fortran ''Call''. This general data base is essentially composed of two combined parts: one allowing to describe any mechanical structure and the other defining a material data base. This sytem is presently in a prototype state and used to test and define the final architecture of the data base and the structure of the elementary data. At the same time the research effort has been devoted to the coupling between the data base and the aplication programs (Data Processor DP). This requires the development of an application programs data base and a process design management system, which is able, with a Data Processor Description Language, to generate the application file and the related data. The main objectives in developing such a system are: - Application of standard calculation methods to a data base sub-system, - Implementation of a data modification in the design process, - Rapid generation of new applications. (orig.)

  1. Development of electronic system for reactivity measurement and reactor noise analysis

    International Nuclear Information System (INIS)

    Strohl, Claude Emile; Soares, Adalberto Jose

    1996-01-01

    In nuclear power reactors, the neutron detector signal is dependent of the number of fissions and the reactor power level. The detector signal can be divided into two components; a DC component, proportional to the average value and an AC component, which is the fluctuating part superimposed to the DC component. The analysis of the fluctuating part of the signal is called noise analysis and allow us to investigate phenomena occurring within the reactor vessel, such as vibration of fuels elements and coolant density, temperature, pressure and flow changes. On the other hand, the measure of the static DC part allow us to measure the local power density. This paper describes the development of a personal computer based signal conditioning card that, together with a personal computer commercial data acquisition card, can be used for noise analysis measurements and reactivity measurements of signals coming from ionization chambers or SPD's. (author)

  2. Development of the Nonstationary Incremental Analysis Update Algorithm for Sequential Data Assimilation System

    Science.gov (United States)

    Ham, Yoo-Geun; Song, Hyo-Jong; Jung, Jaehee; Lim, Gyu-Ho

    2017-04-01

    This study introduces a altered version of the incremental analysis updates (IAU), called the nonstationary IAU (NIAU) method, to enhance the assimilation accuracy of the IAU while retaining the continuity of the analysis. Analogous to the IAU, the NIAU is designed to add analysis increments at every model time step to improve the continuity in the intermittent data assimilation. Still, unlike the IAU, the NIAU method applies time-evolved forcing employing the forward operator as rectifications to the model. The solution of the NIAU is better than that of the IAU, of which analysis is performed at the start of the time window for adding the IAU forcing, in terms of the accuracy of the analysis field. It is because, in the linear systems, the NIAU solution equals that in an intermittent data assimilation method at the end of the assimilation interval. To have the filtering property in the NIAU, a forward operator to propagate the increment is reconstructed with only dominant singular vectors. An illustration of those advantages of the NIAU is given using the simple 40-variable Lorenz model.

  3. Development of the Nonstationary Incremental Analysis Update Algorithm for Sequential Data Assimilation System

    Directory of Open Access Journals (Sweden)

    Yoo-Geun Ham

    2016-01-01

    Full Text Available This study introduces a modified version of the incremental analysis updates (IAU, called the nonstationary IAU (NIAU method, to improve the assimilation accuracy of the IAU while keeping the continuity of the analysis. Similar to the IAU, the NIAU is designed to add analysis increments at every model time step to improve the continuity in the intermittent data assimilation. However, unlike the IAU, the NIAU procedure uses time-evolved forcing using the forward operator as corrections to the model. The solution of the NIAU is superior to that of the forward IAU, of which analysis is performed at the beginning of the time window for adding the IAU forcing, in terms of the accuracy of the analysis field. It is because, in the linear systems, the NIAU solution equals that in an intermittent data assimilation method at the end of the assimilation interval. To have the filtering property in the NIAU, a forward operator to propagate the increment is reconstructed with only dominant singular vectors. An illustration of those advantages of the NIAU is given using the simple 40-variable Lorenz model.

  4. Mobile systems development

    DEFF Research Database (Denmark)

    Hosbond, Jens Henrik

    2005-01-01

    This paper takes a systems development perspective on mobility, building on preliminary findings of an on-going multiple case study covering 7 companies. The questions driving this paper are: What are the challenges facing development practice in the mobile industry, how do they affect practice...... and how are they dealt with? Analysis of the empirical data is done following a structured and inductive approach. A framework showing the segmentation of the mobile industry into five layers is proposed and challenges are presented according to two dimensions, namely a business dimension...

  5. Promoting the Sustainable Building Market: an Evolution Analysis and System Dynamics Simulation on Behaviors of Real Estate Developers and Government

    Directory of Open Access Journals (Sweden)

    Xiuli Xie

    2014-05-01

    Full Text Available Purpose: The Chinese government takes measures to promote the development of green building (GB. But until 2013, there are only few green buildings in China. The real estate developers are skeptical in entering GB market, which requires theories to explain developers and government’s behaviors.Design/methodology/approach: In this study, we attempt Evolutionary game theory and System dynamics (SD into the analysis. A system dynamics model is built for studying evolutionary games between the government and developers in greening building decision making.Findings and Originality/value: The results of mixed-strategy stability analysis and SD simulation show that evolutionary equilibrium does not exist with a static government incentive. Therefore, a dynamical incentive is suggested in the SD model for promoting the green building market. The symmetric game and asymmetric game between two developers show, if the primary proportion who choose GB strategy is lower, all the group in game may finally evolve to GB strategy. In this case and in this time, the government should take measures to encourage developers to enter into the GB market. If the proportion who choose GB strategy is high enough, the government should gradually cancel or reduce those incentive measure.Research limitations/implications: an Evolution Analysis and System Dynamics Simulation on Behaviors of Real Estate Developers and Government could give some advice for the government to promote the green building market.

  6. Developing Automatic Form and Design System Using Integrated Grey Relational Analysis and Affective Engineering

    Directory of Open Access Journals (Sweden)

    Chen-Yuan Liu

    2018-01-01

    Full Text Available In the modern highly competitive marketplace and global market environment, product quality improvements that abridge development time and reduce the production costs are effective methods for promoting the business competitiveness of a product in shorter lifecycles. Since the design process is the best time to control such parameters, systematically designing the processes to develop a product that more closely fits the demand requirements for the market is a key factor for developing a successful product. In this paper, a combined affective engineering method and grey relational analysis are used to develop a product design process. First, design image scale technology is used to acquire the best the design criteria factors, and then affective engineering methods are used to set the relationships between customer needs and production factors. Finally, grey relational analysis is used to select the optimal design strategy. Using this systematic design method, a higher quality product can be expanded upon in a shorter lead-time for improving business competition.

  7. Development of a chromatographic micro-system for radionuclides analysis in nitric acid media

    International Nuclear Information System (INIS)

    Losno, Marion

    2017-01-01

    Radionuclides analysis is a key point for nuclear waste management and nuclear material control. Several steps of sample modification have to be carried out before measurements in order to avoid any interferences and improve measurement precision. However those different steps are long, irradiating and difficult to achieve in gloveboxes. Moreover they produce liquid and solid waste. The goal of the study is to offer a new alternative to the use of solid phase extraction column for radionuclides separation in hard nitric acid medium. The system will decrease the amount of nuclear waste due to the analysis and automatize the different steps of the analysis. A plastic device made of COC containing a micro solid phase extraction column is first designed. Stationary phase is a poly(AMA-co-EDMA) monolith synthesized in situ. Its structure is adjustable and its functionalization versatile with a high resistance to nitric acid medium. Exchange capacity is 150 mg/g of monolith for TBP and TBP/CMPO column and up to 280 mg/g of monolith in case of DAAP. Exchange coefficients are determined for U(VI), Th(IV), Eu(III) and Nd(III) for 3 different extractants (and Pu(IV) in case of TBP column). Monolith synthesis is transferred in centrifugal device and hydrodynamic behavior studied. U,Th/Eu separation was finally carried out in both classic and centrifugal micro-system on TBP column. (author) [fr

  8. Measurement and Analysis of Strains Developed on Tie-rods of a Steering System

    OpenAIRE

    Asenov, Stefan

    2016-01-01

    Modern day manufacturers research and develop vehicles that are equipped with steering assist to help drivers undertake manoeuvres. However the lack of research for a situation where one tie-rod experiences different strains than the opposite one leads to failure in the tie-rod assembly and misalignment in the wheels over time. The performance of the steering system would be improved if this information existed. This bachelor’s dissertation looks into this specific situation and cond...

  9. Gamified systems development focused on edutertainment and player: an analysis of Bartle and Marczewski archetipes

    Directory of Open Access Journals (Sweden)

    Shelley Navari Christianini

    2016-05-01

    Full Text Available This paper presents a development methodology about gamification systems, in which discuss the learning in these media from entertainment, concept defined as Edutertainment. By employing gamification in this type of production, it is believed that the investigation must be focused only on the playing techniques. However, from a literature review, it was found that the focus should be on the player, considering their feelings and real motivations to stay in the system. As a result, it is providing a comparative overview on the theories of Bartle (1996, 2005 and Marczewski (2015 with the main differences between player types in gaming environments and gamification systems, especially with regard to motivational strategies in the context of education.

  10. Requirements Analysis Study for Master Pump Shutdown System Project Development Specification

    International Nuclear Information System (INIS)

    BEVINS, R.R.

    2000-01-01

    This study is a requirements document that presents analysis for the functional description for the master pump shutdown system. This document identifies the sources of the requirements and/or how these were derived. Each requirement is validated either by quoting the source or an analysis process involving the required functionality, performance characteristics, operations input or engineering judgment. The requirements in this study apply to the first phase of the W314 Project. This document has been updated during the definitive design portion of the first phase of the W314 Project to capture additional software requirements and is planned to be updated during the second phase of the W314 Project to cover the second phase of the project's scope

  11. Requirements Analysis Study for Master Pump Shutdown System Project Development Specification [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    BEVINS, R.R.

    2000-09-20

    This study is a requirements document that presents analysis for the functional description for the master pump shutdown system. This document identifies the sources of the requirements and/or how these were derived. Each requirement is validated either by quoting the source or an analysis process involving the required functionality, performance characteristics, operations input or engineering judgment. The requirements in this study apply to the first phase of the W314 Project. This document has been updated during the definitive design portion of the first phase of the W314 Project to capture additional software requirements and is planned to be updated during the second phase of the W314 Project to cover the second phase of the project's scope.

  12. Definition, analysis and development of an optical data distribution network for integrated avionics and control systems

    Science.gov (United States)

    Burns, R. R.

    1981-01-01

    The potential and functional requirements of fiber optic bus designs for next generation aircraft are assessed. State-of-the-art component evaluations and projections were used in the system study. Complex networks were decomposed into dedicated structures, star buses, and serial buses for detailed analysis. Comparisons of dedicated links, star buses, and serial buses with and without full duplex operation and with considerations for terminal to terminal communication requirements were obtained. This baseline was then used to consider potential extensions of busing methods to include wavelength multiplexing and optical switches. Example buses were illustrated for various areas of the aircraft as potential starting points for more detail analysis as the platform becomes definitized.

  13. Development of NESSY (Nuclear ship Engineering Simulation SYstem) and its application to dynamic analysis

    International Nuclear Information System (INIS)

    Kusunoki, T.; Uematsu, H.; Kobayashi, H.

    1992-01-01

    A marine reactor plant sustains incessant load change and the effects of vibration and ship motions due to the maneuvering and dynamic conditions in the marine environment. The change of process variables of the reactor plant is made in accordance with the load change and other effects, and also results in the propeller revolution change and subsequently affects on ship motions. In order to grasp dynamic behavior of the reactor plant in normal operation, including port entry and departure, and also in abnormal conditions such as anticipated transient and accidents, the Nuclear ship Engineering Simulation SYstem (simply ENSSY, hereinafter) carriers out combined analysis in which the behaviors of the ship propulsion, the reactor plant and the secondary systems are simultaneously calculated in each time step. (author)

  14. Distributed Resource Energy Analysis and Management System (DREAMS) Development for Real-time Grid Operations

    Energy Technology Data Exchange (ETDEWEB)

    Nakafuji, Dora [Hawaiian Electric Company, Honululu, HI (United States); Gouveia, Lauren [Hawaiian Electric Company, Honululu, HI (United States)

    2016-10-24

    This project supports development of the next generation, integrated energy management infrastructure (EMS) able to incorporate advance visualization of behind-the-meter distributed resource information and probabilistic renewable energy generation forecasts to inform real-time operational decisions. The project involves end-users and active feedback from an Utility Advisory Team (UAT) to help inform how information can be used to enhance operational functions (e.g. unit commitment, load forecasting, Automatic Generation Control (AGC) reserve monitoring, ramp alerts) within two major EMS platforms. Objectives include: Engaging utility operations personnel to develop user input on displays, set expectations, test and review; Developing ease of use and timeliness metrics for measuring enhancements; Developing prototype integrated capabilities within two operational EMS environments; Demonstrating an integrated decision analysis platform with real-time wind and solar forecasting information and timely distributed resource information; Seamlessly integrating new 4-dimensional information into operations without increasing workload and complexities; Developing sufficient analytics to inform and confidently transform and adopt new operating practices and procedures; Disseminating project lessons learned through industry sponsored workshops and conferences;Building on collaborative utility-vendor partnership and industry capabilities

  15. Collaborative modelling and integrated decision support system analysis of a developed terminal lake basin

    Science.gov (United States)

    Niswonger, Richard G.; Allander, Kip K.; Jeton, Anne E.

    2014-01-01

    A terminal lake basin in west-central Nevada, Walker Lake, has undergone drastic change over the past 90 yrs due to upstream water use for agriculture. Decreased inflows to the lake have resulted in 100 km2 decrease in lake surface area and a total loss of fisheries due to salinization. The ecologic health of Walker Lake is of great concern as the lake is a stopover point on the Pacific route for migratory birds from within and outside the United States. Stakeholders, water institutions, and scientists have engaged in collaborative modeling and the development of a decision support system that is being used to develop and analyze management change options to restore the lake. Here we use an integrated management and hydrologic model that relies on state-of-the-art simulation capabilities to evaluate the benefits of using integrated hydrologic models as components of a decision support system. Nonlinear feedbacks among climate, surface-water and groundwater exchanges, and water use present challenges for simulating realistic outcomes associated with management change. Integrated management and hydrologic modeling provides a means of simulating benefits associated with management change in the Walker River basin where drastic changes in the hydrologic landscape have taken place over the last century. Through the collaborative modeling process, stakeholder support is increasing and possibly leading to management change options that result in reductions in Walker Lake salt concentrations, as simulated by the decision support system.

  16. RSMASS system model development

    International Nuclear Information System (INIS)

    Marshall, A.C.; Gallup, D.R.

    1998-01-01

    1998. A radioisotope space power system model RISMASS is also under development. RISMASS will optimize and predict system masses for radioisotope power sources coupled with close-spaced thermionic diodes. Although RSMASS-D models have been developed for a broad variety of space nuclear power and propulsion systems, only a few concepts will be included in the releasable RSMASS-T computer code. A follow-on effort is recommended to incorporate all previous models as well as solar power system models into one general code. The proposed Space Power and propulsion system MASS (SPMASS) code would provide a consistent analysis tool for comparing a very broad range of alternative power and propulsion systems for any required power level and operating conditions. As for RSMASS-T the SPMASS model should be a certified, fully documented computer code available for general use. The proposed computer program would provide space mission planners with the capability to quickly and cost effectively explore power system options for any space mission. The code should be applicable for power requirements from as low as a few milliwatts (solar and isotopic system options) to many megawatts for reactor power and propulsion systems

  17. A development of Trend Analysis System on Quality Assurance Inspection Results

    International Nuclear Information System (INIS)

    Oh, K. M.; Choi, G. S.; Ahn, S. K.; Lee, W. H.

    2005-01-01

    The purpose of periodic quality assurance (QA) inspection by KINS is to confirm the adequacy of QA program and the effectiveness of its implementation in accordance with a licensee's quality assurance program previously approved. In actual, KINS has performed regulatory QA inspection since March 13th, 1996 entrusted by the MOST. This inspection is executed for major nuclear related enterprises according to Enforcement Decree of the Act Article 31. Inspections typically are performed at a frequency of once every one or two years or three years according to KINS's internal guideline. This regulatory inspection covers siting, design, fabrication, installation, operation, and decommissioning activities of nuclear related facilities. Up to now, inspection findings and recommendations were issued and accumulated approximately to one thousand. But, the trends of a licensee's quality assurance program performance were not systematically analyzed yet. Therefore, this study introduces quality performance indicator and trend analysis system in order to effectively assess a licensee's quality assurance program performance. Using this trend analysis system, the trends of QA inspection findings and recommendations are quantitatively analyzed, based on finding cause codes

  18. Analysis of China Fiscal System for Deepwater Oil and Gas Development under Uncertainty

    Directory of Open Access Journals (Sweden)

    Mingming Liu

    2014-05-01

    Full Text Available World deepwater is famous for its rich oil and gas reserves, and has become an important source of global oil and gas supply, with a rising investment which will be over the shallow water counterparts in the next few years, as well as an expansion of oil and gas output. The ‘Deepwater Golden Triangle’ of the North American Gulf of Mexico, Brazil and West Africa has been leading the most exploration, development and investment activities in the world, and their experience on fiscal system during different development stages has great reference value other than advanced technologies. Under the assumptions of uncertain oil price and producing cost, this paper analyzed China fiscal system for deepwater oil and gas development, modeled the free natural resource tax, uplifting the threshold of special oil levy, and other scenarios, and compared their results on contractor’s net presented value, internal return rate and present index. Based on net present value, internal return rate, profitability index, as well as the domestic fiscal policies, this paper found that Special Oil Levy levied only on profit oil and the cancel of government share oil would have the most significant incentives, while lower the income tax rate to 15%, raising the threshold price at which the Special Oil Levy payable by 15 $/bbl and zero Value-added tax have much higher feasibility.

  19. Development of Matlab Simulink model for dynamics analysis of passive suspension system for lightweight vehicle

    Science.gov (United States)

    Jamali, M. S.; Ismail, K. A.; Taha, Z.; Aiman, M. F.

    2017-10-01

    In designing suitable isolators to reduce unwanted vibration in vehicles, the response from a mathematical model which characterizes the transmissibility ratio of the input and output of the vehicle is required. In this study, a Matlab Simulink model is developed to study the dynamic behaviour performance of passive suspension system for a lightweight electric vehicle. The Simulink model is based on the two degrees of freedom system quarter car model. The model is compared to the theoretical plots of the transmissibility ratios between the amplitudes of the displacements and accelerations of the sprung and unsprung masses to the amplitudes of the ground, against the frequencies at different damping values. It was found that the frequency responses obtained from the theoretical calculations and from the Simulink simulation is comparable to each other. Hence, the model may be extended to a full vehicle model.

  20. Development of the design and reliability analysis of a seabed repository system

    International Nuclear Information System (INIS)

    1987-06-01

    This study examines the seabed repository scheme proposed in 1979 for the long term disposal of heat generating radio-active waste and develops it to a standard sufficient to compare its reliability with the drilled emplacement and penetrator schemes. The reinforced concrete repositories contain 324 waste canisters and weigh 982 tonnes fully loaded in water. The repositories are transported up to 6000 km to the disposal area by a special purpose ship and lowered 5.5 km to the seabed on six braided nylon ropes by traction winches. Reliability of the seabed repository system, measured in terms of accidents per year involving loss of one or more canisters, was comparable with the other systems. (author)

  1. Simulation and development of a multi-leg homogeniser concentrating assembly for concentrated photovoltaic (CPV) system with electrical rating analysis

    KAUST Repository

    Burhan, Muhammad

    2016-03-09

    Concentrated photovoltaic (CPV) system utilizing multi-junction solar cells, is the main focus for current research, offering highest efficiency among all photovoltaic systems. The main aspect of CPV system is the design and performance of concentrating assembly, as it determines the performance of whole CPV system. However, the conventional design of CPV concentrating assembly dedicates one concentrator for each solar cell, in which single concentrator is capable to concentrate solar radiation onto single solar cell. This paper proposes a novel concentrating assembly for CPV system, which is designed to concentrate solar radiation onto four multi-junction solar cells with a single set of concentrators. The proposed design not only can reduce the number of concentrators and assembly efforts for CPV systems, but also achieved an acceptance angle of 1°. In this paper, the proposed multi-leg homogeniser CPV concentrating assembly is designed, developed, experimentally tested and verified through ray tracing simulation. The paper also discuss the development of mini, precise and accurate but cost effective two axis solar tracker for CPV system, which can be installed at any location even at rooftop of residential buildings, unlike conventional large scale CPV systems. Moreover, through the electrical rating analysis of the developed CPV system, its performance can be accurately estimated in any region. © 2016 Elsevier Ltd. All rights reserved.

  2. Analysis of trends in the development of cities' heat supply systems

    Science.gov (United States)

    Stennikov, V. A.; Mednikova, E. E.

    2016-09-01

    New challenges—including the modern urban development policy, formation of the market of energy efficient technologies and different types of equipment of a broad power capacity range, tightening requirements to reliability, quality, and economic accessibility of heat supply—enhance the competitiveness of decentralized heat supply. In addition, its spontaneous growth and not always reasonable implementation lead to unjustified expenses, low efficiency, and ecological inconsistency. This proves the relevance of solving the problems of dividing an urban territory into zones of centralized heating (CH) and decentralized heating (DCH) along with their planning and justification, as well as determining a reasonable level of heat supply centralization and concentration of heat sources' power capacity. Solving these problems using the suggested method will allow optimizing the application areas for various types of heat supply and heat sources, justifying the degree of heat power capacity concentration and the extent of the systems as early as at the phase of a detailed urban planning project and then refining them during the design of urban heat supply systems. This will dramatically improve the reasonability of the decisions made and will simplify the procedure of their implementation. For criteria of limiting the extent (radius) of heat supply systems and defining their type, we suggest using standard values—the density of heat load per unit length of the pipeline and per unit area of urban territory. Standard values must be differentiated across the territory of Russia taking into account regional climatic and economic conditions and unique characteristics of heat supply development in cities and towns. The present article continues and develops the statements made in the previous articles created within the framework of the Theory of Hydraulic Circuits and takes into account the current situation and emerging trends in heat supply.

  3. Fiscal system analysis - contractual systems

    International Nuclear Information System (INIS)

    Kaiser, M.J.

    2006-01-01

    Production sharing contracts are one of the most popular forms of contractual system used in petroleum agreements around the world, but the manner in which the fiscal terms and contract parameters impact system measures is complicated and not well understood. The purpose of this paper is to quantify the influence of private and market uncertainty in contractual fiscal systems. A meta-modelling approach is employed that couples the results of a simulation model with regression analysis to construct numerical functionals that quantify the fiscal regime. Relationships are derived that specify how the present value, rate of return, and take statistics vary as a function of the system parameters. The deepwater Girassol field development in Angola is taken as a case study. (author)

  4. Effect of Policy Analysis on Indonesia’s Maritime Cluster Development Using System Dynamics Modeling

    Science.gov (United States)

    Nursyamsi, A.; Moeis, A. O.; Komarudin

    2018-03-01

    As an archipelago with two third of its territory consist of water, Indonesia should address more attention to its maritime industry development. One of the catalyst to fasten the maritime industry growth is by developing a maritime cluster. The purpose of this research is to gain understanding of the effect if Indonesia implement maritime cluster policy to the growth of maritime economic and its role to enhance the maritime cluster performance, hence enhancing Indonesia’s maritime industry as well. The result of the constructed system dynamic model simulation shows that with the effect of maritime cluster, the growth of employment rate and maritime economic is much bigger that the business as usual case exponentially. The result implies that the government should act fast to form a legitimate cluster maritime organizer institution so that there will be a synergize, sustainable, and positive maritime cluster environment that will benefit the performance of Indonesia’s maritime industry.

  5. Analysis of Spring Development and Gravity Flow System to Capture Water for Local Communities

    Directory of Open Access Journals (Sweden)

    Adiningrum Cita

    2017-01-01

    Full Text Available Springs as water sources are relatively inexpensive but highly susceptible to contamination since they are fed by shallow groundwater. Proper spring development helps protect the water from contamination. This study presents an analysis and design of spring development including the type of broncaptering/collecting wall, the dimension for the spring box and the conduction line. In addition, a guideline on “Springwater Construction” published by the Ministry of Public Works has been used in this design. A concentrated spring in Wates, Magelang, Central Java is used as a case study. The design calls for the collection of water from a spring using sets of broncaptering and a spring box, then piping it by gravity a distance of 5.1 kilometers to Van Lith Senior High School. Analysis was done using a manual calculation, which is subsequently compared to the result of HYDROFLO 3 software. Results show that the spring with a flow rate of 0.12 litre/s (manual and 0.17 litre/s (software will be collected into a 5 m3 volume of spring box. The spring box with a +543 m water surface elevation is being supplied to Van Lith +384 m ground elevation using a uniform PVC pipelines with a ¾ inch of diameter.

  6. A Model-Based Systems Engineering Methodology for Employing Architecture In System Analysis: Developing Simulation Models Using Systems Modeling Language Products to Link Architecture and Analysis

    Science.gov (United States)

    2016-06-01

    Filling Designs for Complex System Simulations.” Ph.D. Dissertation, Naval Postgraduate School. MacCalman, Alex, Hyangshim Kwak, Mary McDonald, and...Michael, Peter Bryant, Mike Wilkinson, Paul King, Ady James, and Stuart Arnold. 2012. “Interpreting ‘Systems Architecting.’” Systems Engineering 15(4...Hyangshim Kwak, Mary McDonald, and Stephen Upton. 2015. “Capturing experimental design insights in support of the model-based systems engineering approach

  7. Development of seismic isolation system in vertical direction. Coupled response analysis of reactor building and common deck isolation system

    International Nuclear Information System (INIS)

    Morishita, Masaki

    1997-04-01

    Study was made on the effect of dynamic interaction between reactor building and common deck isolation structure. Dynamic response analyses were made with a coupled and a decoupled model of the reactor building and the isolation structure. The effect of the dynamic interaction was evaluated by comparing these analysis results. The results of the study can be summarized as below; (1) Dynamic coupling effect between reactor building and the common deck isolation structure is not significant. This can be attributed to the fact that the isolation frequency is sufficiently lower than the fundamental frequency of the soil-structure system. (2) The decoupled analysis model was found to give response results with practically sufficient accuracy and slight conservatism. (3) The effect of the response of common deck isolation structure on the response of the reactor building is also negligible. (author)

  8. Development of a bio-magnetic measurement system and sensor configuration analysis for rats

    Science.gov (United States)

    Kim, Ji-Eun; Kim, In-Seon; Kim, Kiwoong; Lim, Sanghyun; Kwon, Hyukchan; Kang, Chan Seok; Ahn, San; Yu, Kwon Kyu; Lee, Yong-Ho

    2017-04-01

    Magnetoencephalography (MEG) based on superconducting quantum interference devices enables the measurement of very weak magnetic fields (10-1000 fT) generated from the human or animal brain. In this article, we introduce a small MEG system that we developed specifically for use with rats. Our system has the following characteristics: (1) variable distance between the pick-up coil and outer Dewar bottom (˜5 mm), (2) small pick-up coil (4 mm) for high spatial resolution, (3) good field sensitivity (45 ˜ 80 fT /cm/√{Hz} ) , (4) the sensor interval satisfies the Nyquist spatial sampling theorem, and (5) small source localization error for the region to be investigated. To reduce source localization error, it is necessary to establish an optimal sensor layout. To this end, we simulated confidence volumes at each point on a grid on the surface of a virtual rat head. In this simulation, we used locally fitted spheres as model rat heads. This enabled us to consider more realistic volume currents. We constrained the model such that the dipoles could have only four possible orientations: the x- and y-axes from the original coordinates, and two tangentially layered dipoles (local x- and y-axes) in the locally fitted spheres. We considered the confidence volumes according to the sensor layout and dipole orientation and positions. We then conducted a preliminary test with a 4-channel MEG system prior to manufacturing the multi-channel system. Using the 4-channel MEG system, we measured rat magnetocardiograms. We obtained well defined P-, QRS-, and T-waves in rats with a maximum value of 15 pT/cm. Finally, we measured auditory evoked fields and steady state auditory evoked fields with maximum values 400 fT/cm and 250 fT/cm, respectively.

  9. Development and Ecological-Energy Comparative Analysis оf Vapor Compression and Solar Absorption Schemes of Air Conditioning Systems

    Directory of Open Access Journals (Sweden)

    Doroshenko A.V.

    2017-12-01

    Full Text Available The mission of the research included the following objectives: the development of new circuit decisions for the alternate refrigerating systems based on the use of an open absorptive circuit and on the use of solar energy for absorbent solution regeneration; an assessment of the energy and envi-ronmental characteristics of the developed systems; obtaining of the experimental data for an assess-ment of the principal capabilities of the proposed new solar air-conditioning systems. New principles for design of heat and mass transfer equipment in the version with a movable packing of heat exchange elements (fluidized bed packing "gas - liquid - solid body" placed in the packed bed were developed, which allows self-cleaning of the working surfaces and walls of the heat and mass transfer equipment HMT. This new solution, when working with outdoor air and solutions of absorbents, seems to be a fundamentally important condition for maintaining the working capacity of solar absorption systems. The new schemes of absorber with internal steam cooling allowing the improve-ment of the new scheme of the alternate refrigerating system were developed. Comparative analysis based on the methodology of the "Life Cycle Assessment" (LCA showed that new, developed solar systems provide the considerable decrease in energy consumption, their use leads to the decrease of exhaustion of natural resources, influences less global climate change.

  10. Shlaer-Mellor object-oriented analysis and recursive design, an effective modern software development method for development of computing systems for a large physics detector

    International Nuclear Information System (INIS)

    Kozlowski, T.; Carey, T.A.; Maguire, C.F.

    1995-01-01

    After evaluation of several modern object-oriented methods for development of the computing systems for the PHENIX detector at RHIC, we selected the Shlaer-Mellor Object-Oriented Analysis and Recursive Design method as the most appropriate for the needs and development environment of a large nuclear or high energy physics detector. This paper discusses our specific needs and environment, our method selection criteria, and major features and components of the Shlaer-Mellor method

  11. Theoretical development and first-principles analysis of strongly correlated systems

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chen [Iowa State Univ., Ames, IA (United States)

    2016-12-17

    A variety of quantum many-body methods have been developed for studying the strongly correlated electron systems. We have also proposed a computationally efficient and accurate approach, named the correlation matrix renormalization (CMR) method, to address the challenges. The initial implementation of the CMR method is designed for molecules which have theoretical advantages, including small size of system, manifest mechanism and strongly correlation effect such as bond breaking process. The theoretic development and benchmark tests of the CMR method are included in this thesis. Meanwhile, ground state total energy is the most important property of electronic calculations. We also investigated an alternative approach to calculate the total energy, and extended this method for magnetic anisotropy energy (MAE) of ferromagnetic materials. In addition, another theoretical tool, dynamical mean- field theory (DMFT) on top of the DFT , has also been used in electronic structure calculations for an Iridium oxide to study the phase transition, which results from an interplay of the d electrons' internal degrees of freedom.

  12. Development of automatic nuclear emulsion plate analysis system and its application to elementary particle reactions, 2

    International Nuclear Information System (INIS)

    Ushida, Noriyuki; Otani, Masashi; Kumazaki, Noriyasu

    1984-01-01

    This system is composed of precise coordinate measuring apparatuses, a stage controller and various peripherals, employing NOVA 4/C as the host computer. The analyzed results are given as the output to a printer or an XY plotter. The data required for experiment, sent from Nagoya University and others, are received by the host computer through an acoustic coupler, and stored in floppy disks. This paper contains simple explanation on the monitor for the events which occur immediately after the on-line measurement ''MTF 1'', the XY plotter and the acoustic coupler, which hold important position in the system in spite of low cost, due to the development of useful program, as those were not described in the previous paper. The three-dimensional reconstruction of tracks and various errors, corrective processing and analytical processing after corrective processing as off-line processing are also described. In addition, the application of the system was made to the E-531 neutrino experiment in Fermi National Accelerator Laboratory, which attempted to measure the life of the charm particles generated in neutrino reaction with a composite equipment composed of nuclear plates and various counters. First, the outline of the equipment, next, the location of neutrino reaction and the surveillance of charm particle decay using MTF program as the analyzing method at the target, and thirdly, the emulsion-counter data fitting are explained, respectively. (Wakatsuki, Y.)

  13. Development and analysis of micro-polygeneration systems and adsorption chillers

    Science.gov (United States)

    Gluesenkamp, Kyle

    About a fifth of all primary energy in the US is consumed by residential buildings, mostly for cooling, heating and to provide electricity. Furthermore, retrofits are essential to reducing this consumption, since the buildings that exist today will comprise over half of those in use in 2050. Residential combined heat and power (or micro CHP, defined by off-grid for today's prime movers, with potential on-grid for various fuel cell technologies. A novel dynamic test facility was developed to measure real-world residential trigeneration system performance using a prototype adsorption chiller. The chiller was designed and constructed for this thesis and was driven by waste heat from a commercially available natural gas-fueled 4 kW (electric) CHP engine. A control strategy for the chiller was developed, enabling a 5-day experiment to be run using a thermal load profile based on moderate Maryland summer air conditioning loads and typical single-family domestic hot water demand, with experimental results in agreement with models. In this summer mode, depending on electrical loads, the trigeneration system used up to 36% less fuel than off-grid separate generation and up to 29% less fuel than off-grid CHP without thermally driven cooling. However, compared to on-grid separate generation, the experimental facility used 16% more primary energy. Despite high chiller performance relative to its thermodynamic limit, this result is primarily due to the electrical efficiency of the prime mover being lower than the grid. A residential trigeneration system utilizing a high temperature fuel cell is predicted to save up to 42% primary energy relative to the grid.

  14. [Scenario analysis on sustainable development of Sino-Singapore Tianjin Eco-city based on emergy and system dynamics].

    Science.gov (United States)

    Li, Chun-fa; Cao, Ying-ying; Yang, Jian-cho; Yang, Qi-qi

    2015-08-01

    Dynamic evaluation of sustainable development is one of the key fundamental parts of the success of Sino-Singapore Tianjin Eco-city, which is the first eco-city in China constructed by international cooperation. Based on the analysis of nature and economy, function and structure, planning control indices and so on, we constructed a sustainable development evaluation index system and a system dynamics model of Sino-Singapore Tianjin Eco-city to explore dynamic trends of its population, material and currency by comprehensive utilization of emergy analysis and system dynamics method. Five scenarios were set up and simulated, including inertial scenario, scientific and technological scenario, economic scenario, environmental scenario and harmonious development scenario. Then, the sustainability of the 5 scenarios was evaluated and compared. The results showed that in the economy and environment sustainable development scenario, there was a steady growth trend of GDP, accumulation of both emergy and currency, and relatively lower values in emergy waste ratio, emergy ratio of waste, and emergy loading ratio. Although both sustainable evaluation indices, such as ESI and UEI, were relatively low, the economy and environment sustainable development scenario was still the best development scenario which was more active than others.

  15. Development of the simulation system {open_quotes}IMPACT{close_quotes} for analysis of nuclear power plant severe accidents

    Energy Technology Data Exchange (ETDEWEB)

    Naitoh, Masanori; Ujita, Hiroshi; Nagumo, Hiroichi [Nuclear Power Corp. (Japan)] [and others

    1997-07-01

    The Nuclear Power Engineering Corporation (NUPEC) has initiated a long-term program to develop the simulation system {open_quotes}IMPACT{close_quotes} for analysis of hypothetical severe accidents in nuclear power plants. IMPACT employs advanced methods of physical modeling and numerical computation, and can simulate a wide spectrum of senarios ranging from normal operation to hypothetical, beyond-design-basis-accident events. Designed as a large-scale system of interconnected, hierarchical modules, IMPACT`s distinguishing features include mechanistic models based on first principles and high speed simulation on parallel processing computers. The present plan is a ten-year program starting from 1993, consisting of the initial one-year of preparatory work followed by three technical phases: Phase-1 for development of a prototype system; Phase-2 for completion of the simulation system, incorporating new achievements from basic studies; and Phase-3 for refinement through extensive verification and validation against test results and available real plant data.

  16. Technical support for digital systems technology development. Task order 1: ISP contention analysis and control

    Science.gov (United States)

    Stehle, Roy H.; Ogier, Richard G.

    1993-01-01

    Alternatives for realizing a packet-based network switch for use on a frequency division multiple access/time division multiplexed (FDMA/TDM) geostationary communication satellite were investigated. Each of the eight downlink beams supports eight directed dwells. The design needed to accommodate multicast packets with very low probability of loss due to contention. Three switch architectures were designed and analyzed. An output-queued, shared bus system yielded a functionally simple system, utilizing a first-in, first-out (FIFO) memory per downlink dwell, but at the expense of a large total memory requirement. A shared memory architecture offered the most efficiency in memory requirements, requiring about half the memory of the shared bus design. The processing requirement for the shared-memory system adds system complexity that may offset the benefits of the smaller memory. An alternative design using a shared memory buffer per downlink beam decreases circuit complexity through a distributed design, and requires at most 1000 packets of memory more than the completely shared memory design. Modifications to the basic packet switch designs were proposed to accommodate circuit-switched traffic, which must be served on a periodic basis with minimal delay. Methods for dynamically controlling the downlink dwell lengths were developed and analyzed. These methods adapt quickly to changing traffic demands, and do not add significant complexity or cost to the satellite and ground station designs. Methods for reducing the memory requirement by not requiring the satellite to store full packets were also proposed and analyzed. In addition, optimal packet and dwell lengths were computed as functions of memory size for the three switch architectures.

  17. Development of safety analysis methodology for moderator system failure of CANDU-6 reactor by thermal-hydraulics/physics coupling

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Hyun, E-mail: jhkim@actbest.com [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1, Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); ACT Co., Ltd, 705 Gwanpyeong-dong, Yuseong-gu, Daejeon 305-509 (Korea, Republic of); Jin, Dong Sik [ACT Co., Ltd, 705 Gwanpyeong-dong, Yuseong-gu, Daejeon 305-509 (Korea, Republic of); Chang, Soon Heung [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1, Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2013-10-15

    Highlights: • Developed new safety analysis methodology of moderator system failures for CANDU-6. • The new methodology used the TH-physics coupling concept. • Thermalhydraulic code is CATHENA, physics code is RFSP-IST. • Moderator system failure ends to the subcriticality through self-shutdown. -- Abstract: The new safety analysis methodology for the CANDU-6 nuclear power plant (NPP) moderator system failure has been developed by using the coupling technology with the thermalhydraulic code, CATHENA and reactor core physics code, RFSP-IST. This sophisticated methodology can replace the legacy methodology using the MODSTBOIL and SMOKIN-G2 in the field of the thermalhydraulics and reactor physics, respectively. The CATHENA thermalhydraulic model of the moderator system can simulate the thermalhydraulic behaviors of all the moderator systems such as the calandria tank, head tank, moderator circulating circuit and cover gas circulating circuit and can also predict the thermalhydraulic property of the moderator such as moderator density, temperature and water level in the calandria tank as the moderator system failures go on. And these calculated moderator thermalhydraulic properties are provided to the 3-dimensional neutron kinetics solution module – CERBRRS of RFSP-IST as inputs, which can predict the change of the reactor power and provide the calculated reactor power to the CATHENA. These coupling calculations are performed at every 2 s time steps, which are equivalent to the slow control of CANDU-6 reactor regulating systems (RRS). The safety analysis results using this coupling methodology reveal that the reactor operation enters into the self-shutdown mode without any engineering safety system and/or human interventions for the postulated moderator system failures of the loss of heat sink and moderator inventory, respectively.

  18. Development of particle characteristics diagnosis system for nanoparticle analysis in vacuum.

    Science.gov (United States)

    Kim, Dongbin; Mun, Jihun; Kim, HyeongU; Yun, Ju-Young; Kim, Yong-Ju; Kim, TaeWan; Kim, Taesung; Kang, Sang-Woo

    2016-02-01

    A particle characteristics diagnosis system (PCDS) was developed to measure nano-sized particle properties by a combination of particle beam mass spectrometry, scanning electron microscopy (SEM), and energy dispersive x-ray spectroscopy (EDS). It allows us to measure the size distributions of nano-sized particles in real time, and the shape and composition can be determined by in situ SEM imaging and EDS scanning. PCDS was calibrated by measuring the size-classified nano-sized NaCl particles generated using an aqueous solution of NaCl by an atomizer. After the calibration, the characteristics of nano-sized particles sampled from the exhaust line of the plasma-enhanced chemical vapor deposition process were determined using PCDS.

  19. Developing Fully Coupled Dynamical Reactor Core Isolation System Models in RELAP-7 for Extended Station Black-Out Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Haihua Zhao; Ling Zou; Hongbin Zhang; David Andrs; Richard Martineau

    2014-04-01

    The reactor core isolation cooling (RCIC) system in a boiling water reactor (BWR) provides makeup water to the reactor vessel for core cooling when the main steam lines are isolated and the normal supply of water to the reactor vessel is lost. It was one of the very few safety systems still available during the Fukushima Daiichi accidents after the tsunamis hit the plants and the system successfully delayed the core meltdown for a few days for unit 2 & 3. Therefore, detailed models for RCIC system components are indispensable to understand extended station black-out accidents (SBO) for BWRs. As part of the effort to develop the new generation reactor system safety analysis code RELAP-7, major components to simulate the RCIC system have been developed. This paper describes the models for those components such as turbine, pump, and wet well. Selected individual component test simulations and a simplified SBO simulation up to but before core damage is presented. The successful implementation of the simplified RCIC and wet well models paves the way to further improve the models for safety analysis by including more detailed physical processes in the near future.

  20. Development and analysis of a novel cytokine biosensor concept for astronaut immune system monitoring

    Science.gov (United States)

    Aponte, Vanessa M.

    The dynamics of how astronauts' immune systems respond to space flight have been studied extensively, but the complex process has not to date been thoroughly characterized, nor have the underlying principles of what causes the immune system to change in microgravity been fully determined. To obtain statistically significant results regarding overall immunological effects in space, collecting in vivo data during flight is desirable, but no sensor is currently capable of performing such function in this environment. The aims of this research were to establish appropriate markers for in-flight monitoring of the immune system and develop a novel approach for a benchtop sensor to measure them. Quartz Crystal Microbalances (QCMs) were used as platforms to study a surface biochemistry process selective towards cytokines, which are used as stress-related immune markers in space and ground medicine. Pilot studies elucidated that a thiolated streptavidin-biotinylated antibody surface assembly did not form the protein monolayer necessary for stable cytokine sensing. Improved experiments incorporated self-assembled monolayers (SAMs) by using di-thiol tethers at the base of a dual antibody sandwich and fluorophore assembly. The goals of the improved experiments were to achieve a stable monolayer of covalently bound tethers, to enhance sensitivity by the addition of a second monoclonal antibody, and to have a fluorescence tether attached to the last antibody layer as a way to corroborate the amount of proteins attached to the surface by using confocal fluorescence microscopy (CFM). Atomic Force Microscopy (AFM) results confirmed the formation of an even protein monolayer at the surface of the QCM, while CFM corroborated that the entire sandwich assembly had been achieved. Frequency changes increased directly proportional to concentration of cytokines, adhering to non-linear behavior explained by viscoelastic fluid models. Results point to the promising use of this surface

  1. Quantitative Analysis of Axonal Branch Dynamics in the Developing Nervous System.

    Directory of Open Access Journals (Sweden)

    Kelsey Chalmers

    2016-03-01

    Full Text Available Branching is an important mechanism by which axons navigate to their targets during neural development. For instance, in the developing zebrafish retinotectal system, selective branching plays a critical role during both initial pathfinding and subsequent arborisation once the target zone has been reached. Here we show how quantitative methods can help extract new information from time-lapse imaging about the nature of the underlying branch dynamics. First, we introduce Dynamic Time Warping to this domain as a method for automatically matching branches between frames, replacing the effort required for manual matching. Second, we model branch dynamics as a birth-death process, i.e. a special case of a continuous-time Markov process. This reveals that the birth rate for branches from zebrafish retinotectal axons, as they navigate across the tectum, increased over time. We observed no significant change in the death rate for branches over this time period. However, blocking neuronal activity with TTX slightly increased the death rate, without a detectable change in the birth rate. Third, we show how the extraction of these rates allows computational simulations of branch dynamics whose statistics closely match the data. Together these results reveal new aspects of the biology of retinotectal pathfinding, and introduce computational techniques which are applicable to the study of axon branching more generally.

  2. Quantitative Analysis of Axonal Branch Dynamics in the Developing Nervous System.

    Science.gov (United States)

    Chalmers, Kelsey; Kita, Elizabeth M; Scott, Ethan K; Goodhill, Geoffrey J

    2016-03-01

    Branching is an important mechanism by which axons navigate to their targets during neural development. For instance, in the developing zebrafish retinotectal system, selective branching plays a critical role during both initial pathfinding and subsequent arborisation once the target zone has been reached. Here we show how quantitative methods can help extract new information from time-lapse imaging about the nature of the underlying branch dynamics. First, we introduce Dynamic Time Warping to this domain as a method for automatically matching branches between frames, replacing the effort required for manual matching. Second, we model branch dynamics as a birth-death process, i.e. a special case of a continuous-time Markov process. This reveals that the birth rate for branches from zebrafish retinotectal axons, as they navigate across the tectum, increased over time. We observed no significant change in the death rate for branches over this time period. However, blocking neuronal activity with TTX slightly increased the death rate, without a detectable change in the birth rate. Third, we show how the extraction of these rates allows computational simulations of branch dynamics whose statistics closely match the data. Together these results reveal new aspects of the biology of retinotectal pathfinding, and introduce computational techniques which are applicable to the study of axon branching more generally.

  3. Development of an analysis methodology applied to 4πβ-γ software coincidence data acquisition system

    International Nuclear Information System (INIS)

    Brancaccio, Franco; Dias, Mauro da Silva; Toledo, Fabio de

    2009-01-01

    The present work describes the new software methodology under development at the IPEN Nuclear Metrology Laboratory for radionuclide standardizations with 4πβ-γ coincidence technique. The software includes the Coincidence Graphic User Interface (GUI) and the Coincidence Analysis Program. The first results for a 60 Co sample measurement are discussed and compared to the results obtained with two different conventional coincidence systems. (author)

  4. Software safety analysis techniques for developing safety critical software in the digital protection system of the LMR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jang Soo; Cheon, Se Woo; Kim, Chang Hoi; Sim, Yun Sub

    2001-02-01

    This report has described the software safety analysis techniques and the engineering guidelines for developing safety critical software to identify the state of the art in this field and to give the software safety engineer a trail map between the code and standards layer and the design methodology and documents layer. We have surveyed the management aspects of software safety activities during the software lifecycle in order to improve the safety. After identifying the conventional safety analysis techniques for systems, we have surveyed in details the software safety analysis techniques, software FMEA(Failure Mode and Effects Analysis), software HAZOP(Hazard and Operability Analysis), and software FTA(Fault Tree Analysis). We have also surveyed the state of the art in the software reliability assessment techniques. The most important results from the reliability techniques are not the specific probability numbers generated, but the insights into the risk importance of software features. To defend against potential common-mode failures, high quality, defense-in-depth, and diversity are considered to be key elements in digital I and C system design. To minimize the possibility of CMFs and thus increase the plant reliability, we have provided D-in-D and D analysis guidelines.

  5. Software safety analysis techniques for developing safety critical software in the digital protection system of the LMR

    International Nuclear Information System (INIS)

    Lee, Jang Soo; Cheon, Se Woo; Kim, Chang Hoi; Sim, Yun Sub

    2001-02-01

    This report has described the software safety analysis techniques and the engineering guidelines for developing safety critical software to identify the state of the art in this field and to give the software safety engineer a trail map between the code and standards layer and the design methodology and documents layer. We have surveyed the management aspects of software safety activities during the software lifecycle in order to improve the safety. After identifying the conventional safety analysis techniques for systems, we have surveyed in details the software safety analysis techniques, software FMEA(Failure Mode and Effects Analysis), software HAZOP(Hazard and Operability Analysis), and software FTA(Fault Tree Analysis). We have also surveyed the state of the art in the software reliability assessment techniques. The most important results from the reliability techniques are not the specific probability numbers generated, but the insights into the risk importance of software features. To defend against potential common-mode failures, high quality, defense-in-depth, and diversity are considered to be key elements in digital I and C system design. To minimize the possibility of CMFs and thus increase the plant reliability, we have provided D-in-D and D analysis guidelines

  6. VENTILATION TECHNOLOGY SYSTEMS ANALYSIS

    Science.gov (United States)

    The report gives results of a project to develop a systems analysis of ventilation technology and provide a state-of-the-art assessment of ventilation and indoor air quality (IAQ) research needs. (NOTE: Ventilation technology is defined as the hardware necessary to bring outdoor ...

  7. Development of a cause analysis system for a CPCS trip by using the rule-base deduction method.

    Science.gov (United States)

    Park, Je-Yun; Koo, In-Soo; Sohn, Chang-Ho; Kim, Jung-Seon; Cho, Gi-Ho; Park, Hee-Seok

    2009-07-01

    A Core Protection Calculator System (CPCS) was developed to initiate a Reactor Trip under the circumstance of certain transients by a Combustion Engineering Company. The major function of the Core Protection Calculator System is to generate contact outputs for the Departure from Nucleate Boiling Ratio (DNBR) Trip and a Local Power Density (LPD) Trip. But in a Core Protection Calculator System, a trip cause cannot be identified, thus only trip signals are transferred to the Plant Protection System (PPS) and only the trip status is displayed. It could take a considerable amount of time and effort for a plant operator to analyze the trip causes of a Core Protection Calculator System. So, a Cause Analysis System for a Core Protection Calculator System (CASCPCS) has been developed by using the rule-base deduction method to assist operators in a Nuclear Power Plant. CASCPCS consists of three major parts. Inference engine has a role of controlling the searching knowledge base, executing the rules and tracking the inference process by using the depth-first searching method. Knowledge base consists of four major parts: rules, data base constants, trip buffer variables and causes. And a user interface is implemented by using menu-driven and window display techniques. The advantage of CASCPCS is that it saves time and effort to diagnose the trip causes of a Core Protection Calculator System, it increases a plant's availability and reliability, and it makes it easy to manage CASCPCS because of using only a cursor control.

  8. A Multi-criteria Decision Analysis System for Prioritizing Sites and Types of Low Impact Development Practices

    Science.gov (United States)

    Song, Jae Yeol; Chung, Eun-Sung

    2017-04-01

    This study developed a multi-criteria decision analysis framework to prioritize sites and types of low impact development (LID) practices. This framework was systemized as a web-based system coupled with the Storm Water Management Model (SWMM) from the Environmental Protection Agency (EPA). Using the technique for order of preference by similarity to ideal solution (TOPSIS), which is a type of multi-criteria decision-making (MCDM) method, multiple types and sites of designated LID practices are prioritized. This system is named the Water Management Prioritization Module (WMPM) and is an improved version of the Water Management Analysis Module (WMAM) that automatically generates and simulates multiple scenarios of LID design and planning parameters for a single LID type. WMPM can simultaneously determine the priority of multiple LID types and sites. In this study, an infiltration trench and permeable pavement were considered for multiple sub-catchments in South Korea to demonstrate the WMPM procedures. The TOPSIS method was manually incorporated to select the vulnerable target sub-catchments and to prioritize the LID planning scenarios for multiple types and sites considering socio-economic, hydrologic and physical-geometric factors. In this application, the Delphi method and entropy theory were used to determine the subjective and objective weights, respectively. Comparing the ranks derived by this system, two sub-catchments, S16 and S4, out of 18 were considered to be the most suitable places for installing an infiltration trench and porous pavement to reduce the peak and total flow, respectively, considering both socio-economic factors and hydrological effectiveness. WMPM can help policy-makers to objectively develop urban water plans for sustainable development. Keywords: Low Impact Development, Multi-Criteria Decision Analysis, SWMM, TOPSIS, Water Management Prioritization Module (WMPM)

  9. INTEGRATED ON-BOARD COMPUTING SYSTEMS: PRESENT SITUATION REVIEW AND DEVELOPMENT PROSPECTS ANALYSIS IN THE AVIATION INSTRUMENT-MAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    P. P. Paramonov

    2013-03-01

    Full Text Available The article deals with present situation review and analysis of development prospects for integrated on-board computing systems, used in the aviation instrument-making industry. The main attention is paid to the projects carried out in the framework of an integrated modular avionics. Hierarchical levels of module design, crates (onboard systems and aviation complexes are considered in detail. Examples of the existing products of our country and from abroad and their brief technical characteristics are given and voluminous bibliography on the subject matter as well.

  10. Sustainable agriculture, renewable energy and rural development: An analysis of bio-energy systems used by small farms in China

    Science.gov (United States)

    Zhou, Aiming

    Renewable energy needs to be incorporated into the larger picture of sustainable agriculture and rural development if it is to serve the needs of the 3.25 billion human beings whose livelihoods and based on rural economies and ecologies. For rural communities, increasing agriculture production is key to raising income generation and improving social well-being, but this linkage depends also upon not harming natural resources. This dissertation provides an overview of recent Chinese agriculture history, discusses the role of energy in contemporary's China's agriculture and rural development, and introduces a new approach---the integrated agricultural bio-energy (IAB) system---to address the challenge of sustainable agriculture and rural development. IAB is an innovative design and offers a renewable energy solution for improving agricultural productivity, realizing efficient resource management, and enhancing social well-being for rural development. In order to understand how the IAB system can help to achieve sustainable agricultural and rural development in China, a comprehensive evaluation methodology is developed from health, ecological, energy and economic (HE3) perspectives. With data from surveys of 200 small farm households, a detailed study of IAB and conventional agricultural energy (CAE) system applications (in China's Liaoning and Yunnan Province) is conducted. The HE3 impacts of IAB systems in China's rural areas (compared to existing CAE systems) are quantified. The dissertation analyzes the full life-cycle costs and benefits of IAB systems, including their contributions to energy savings, CO2 emissions reduction, agricultural waste reduction, increased rural incomes, better rural health, and improved ecosystem sustainability. The analysis relies upon qualitative and quantitative modeling in order to produce a comprehensive assessment of IAB system impacts. Finally, the dissertation discusses the barriers to greater diffusion of the IAB systems

  11. Definition, analysis and development of an optical data distribution network for integrated avionics and control systems. Part 2: Component development and system integration

    Science.gov (United States)

    Yen, H. W.; Morrison, R. J.

    1984-01-01

    Fiber optic transmission is emerging as an attractive concept in data distribution onboard civil aircraft. Development of an Optical Data Distribution Network for Integrated Avionics and Control Systems for commercial aircraft will provide a data distribution network that gives freedom from EMI-RFI and ground loop problems, eliminates crosstalk and short circuits, provides protection and immunity from lightning induced transients and give a large bandwidth data transmission capability. In addition there is a potential for significantly reducing the weight and increasing the reliability over conventional data distribution networks. Wavelength Division Multiplexing (WDM) is a candidate method for data communication between the various avionic subsystems. With WDM all systems could conceptually communicate with each other without time sharing and requiring complicated coding schemes for each computer and subsystem to recognize a message. However, the state of the art of optical technology limits the application of fiber optics in advanced integrated avionics and control systems. Therefore, it is necessary to address the architecture for a fiber optics data distribution system for integrated avionics and control systems as well as develop prototype components and systems.

  12. Geological disposal system development

    International Nuclear Information System (INIS)

    Kang, Chul Hyung; Kuh, J. E.; Kim, S. K. and others

    2000-04-01

    Spent fuel inventories to be disposed of finally and design base spent fuel were determined. Technical and safety criteria for a geological repository system in Korea were established. Based on the properties of spent PWR and CANDU fuels, seven repository alternatives were developed and the most promising repository option was selected by the pair-wise comparison method from the technology point of view. With this option preliminary conceptual design studies were carried out. Several module, e.g., gap module, congruent release module were developed for the overall assessment code MASCOT-K. The prominent overseas databases such as OECD/NEA FEP list were are fully reviewed and then screened to identify the feasible ones to reflect the Korean geo-hydrological conditions. In addition to this the well known scenario development methods such as PID, RES were reviewed. To confirm the radiological safety of the proposed KAERI repository concept the preliminary PA was pursued. Thermo-hydro-mechanical analysis for the near field of repository were performed to verify thermal and mechanical stability for KAERI repository system. The requirements of buffer material were analyzed, and based on the results, the quantitative functional criteria for buffer material were established. The hydraulic and swelling property, mechanical properties, and thermal conductivity, the organic carbon content, and the evolution of pore water chemistry were investigated. Based on the results, the candidate buffer material was selected

  13. Geological disposal system development

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Chul Hyung; Kuh, J. E.; Kim, S. K. and others

    2000-04-01

    Spent fuel inventories to be disposed of finally and design base spent fuel were determined. Technical and safety criteria for a geological repository system in Korea were established. Based on the properties of spent PWR and CANDU fuels, seven repository alternatives were developed and the most promising repository option was selected by the pair-wise comparison method from the technology point of view. With this option preliminary conceptual design studies were carried out. Several module, e.g., gap module, congruent release module were developed for the overall assessment code MASCOT-K. The prominent overseas databases such as OECD/NEA FEP list were are fully reviewed and then screened to identify the feasible ones to reflect the Korean geo-hydrological conditions. In addition to this the well known scenario development methods such as PID, RES were reviewed. To confirm the radiological safety of the proposed KAERI repository concept the preliminary PA was pursued. Thermo-hydro-mechanical analysis for the near field of repository were performed to verify thermal and mechanical stability for KAERI repository system. The requirements of buffer material were analyzed, and based on the results, the quantitative functional criteria for buffer material were established. The hydraulic and swelling property, mechanical properties, and thermal conductivity, the organic carbon content, and the evolution of pore water chemistry were investigated. Based on the results, the candidate buffer material was selected.

  14. TECHNOLOGY AND ANALYSIS DEVELOPMENT OF STOMATOLOGICAL MATRIX SYSTEM OF MULTIFUNCTIONAL ACTION DELIVERY

    Directory of Open Access Journals (Sweden)

    T. F. Marinina

    2014-01-01

    Full Text Available Timeliness of double-layer matrix system (of stomatological medicated films with antiinflammatory, local anesthetic, regenerative, anti-edematous action was shown. One layer of the system includes lidocaine hydrochloride and kalanchoe sap, another contains furacilin and urea. The best possible polymer carriers of preparations under study which provide their sufficient release from matrix system. Signified antimicrobic activity of double-layer system and osmotic activity were established. Double-layer matrix systems offered may be used in stomatology with for treatment and preventive measures of different diseases of parodontium tissues

  15. Developing systems engineers

    CSIR Research Space (South Africa)

    Goncalves, D

    2008-07-01

    Full Text Available in the development cycle, documenting requirements, then proceeding with design synthesis and system validation while considering the complete problem: Operations, Cost & Schedule, Performance, Training & Support, Test, Disposal, Manufacturing. Systems... for developing systems engineers. A commonly used one is to attend a commercial course presented by either local or international presenters. Some larger companies have developed in-house training. Using external training providers does not require the time...

  16. Development of heat and mass balance analysis code in out-of-pile hydrogen production system for HTTR heat utilization system (contract research)

    Energy Technology Data Exchange (ETDEWEB)

    Inaba, Yoshitomo; Inagaki, Yoshiyuki; Hayashi, Koji; Suyama, Kazumasa [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    1999-03-01

    A heat and mass balance analysis code has been developed to examine test conditions, to investigate transient behavior etc. in the out-of-pile hydrogen production system for the HTTR heat utilization system. The code can analyze temperature, mass and pressure profiles of helium and process gases and behavior of the control system under both static state (case of steady operation) and dynamic state (case of transient operation). This report describes analytical methods, basic equations and constitution of the code, and how to make of the input data, estimate of the analytical results and so on. (author)

  17. Advanced development of a pressurized ash agglomerating fluidized-bed coal gasification system: Topical report, Process analysis, FY 1983

    Energy Technology Data Exchange (ETDEWEB)

    None

    1987-07-31

    KRW Energy Systems, Inc., is engaged in the continuing development of a pressurized, fluidized-bed gasification process at its Waltz Mill Site in Madison, Pennsylvania. The overall objective of the program is to demonstrate the viability of the KRW process for the environmentally-acceptable production of low- and medium-Btu fuel gas from a variety of fossilized carbonaceous feedstocks and industrial fuels. This report presents process analysis of the 24 ton-per-day Process Development Unit (PDU) operations and is a continuation of the process analysis work performed in 1980 and 1981. Included is work performed on PDU process data; gasification; char-ash separation; ash agglomeration; fines carryover, recycle, and consumption; deposit formation; materials; and environmental, health, and safety issues. 63 figs., 43 tabs.

  18. Developing stroke-specific vocational rehabilitation: a soft systems analysis of current service provision

    Science.gov (United States)

    Radford, Kathryn; Grant, Mary; Terry, Jane

    2014-01-01

    Purpose: This study aimed to clarify the existing service provision of stroke-specific vocational rehabilitation (VR) in one English county, in order to facilitate future service development. Method: Using soft systems methodology, services in Health, Social Care, Department of Work and Pensions, the voluntary and private sectors, which were identified as supporting return to work after stroke, were mapped using a mixed-methodology approach. Results: A lack of a sanctioned VR pathway meant access to support relied on brokered provision and tacit knowledge. The timing of an intervention was complex and there was a substantial degree of unmet need for mild stroke patients. VR was seen as “non-essential” due to competing commissioning priorities. Service providers from all sectors lacked training and cross-sector partnerships were tenuous and provider roles unclear. Conclusions: Stroke-specific VR should be delivered by an integrated, cross-sector multi-disciplinary team and integrated commissioning between health and other sectors is necessary. Although early intervention is important, support later on in the recovery process is also necessary. Service providers need adequate training to meet the needs of stroke survivors wishing to return to work and better awareness of best practice guidelines. Business cases which demonstrate the efficacy and cost-effectiveness of VR are vital. Implications for Rehabilitation The timeliness of a vocational rehabilitation (VR) intervention is complex; services need to be responsive to the changing needs of the stroke survivor throughout their recovery process and have better mechanisms to ensure re-entry into the stroke pathway is possible. Return to work is a recognised health outcome; health services need to develop better mechanisms for interagency/cross sector working and liaison with employers and not assume that VR is beyond their remit. Therapists and non-health service providers should receive sufficient training to

  19. Development of efficient system for collection-analysis-application of information using system for technology and information in field of RI-biomics

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Sol Ah; Kim, Joo Yeon; Park, Tai Jin [Korean Association for Radiation Application, Seoul (Korea, Republic of)

    2015-08-15

    RI-Biomics is the new radiation fusion technology of which, such as the characteristics of radioisotope, is applied to the biomics. In order to sharing and overall analysis of data between the institutions through total management of information in the field of RI-Biomics, RI-Biomics Information portal ‘RIBio-Info’ was constructed by KARA (Korean Association for Radiation Application) in February 2015. For systematic operation of this ‘RIBio-Info’ system, it is required to develop system of collection-analysis-application of information. So, in this paper, we summarized development of document forms at each processes of collection-analysis-application of information and systematization of collection methods of information, establishment of characteristically analysis methods of reports such as issue paper, policy report, global market report and watch report. Therefore, these are expected to improving the practical applicability in this field through the vitalization of technology development of users by achieving the circular structure of collection analysis-application of information.

  20. Web-Based Systems Development: Analysis and Comparison of Practices in Croatia and Ireland

    Science.gov (United States)

    Lang, Michael; Vukovac, Dijana Plantak

    The “dot.com” hysteria which sparked fears of a “Web crisis” a decade ago has long subsided and firms established in the 1990 s now have mature development processes in place. This chapter presents a timely re-assessment of the state of Web development practices, comparing data gathered in Croatia and Ireland. Given the growth in popularity of “agile” methods in the past few years, a secondary objective of this research was to analyse the extent to which Web development practices are guided by or otherwise consistent with the underlying principles of agile development.

  1. A PROCEDURAL AND COST ANALYSIS STUDY OF MEDIA IN INSTRUCTIONAL SYSTEMS DEVELOPMENT, PARTS A AND B.

    Science.gov (United States)

    BARSON, JOHN; JONES, GARDNER, M.

    A TWO-PART STUDY WAS CONDUCTED TO IDENTIFY THE FACTORS WHICH CONTRIBUTE TO SUCCESSFUL MEDIA INNOVATION AND INSTRUCTIONAL DEVELOPMENT, AND TO ESTABLISH GUIDELINES TO SERVE OTHERS. IN PART A, THE OPERATION OF MEDIA SUPPORT AGENCIES AT MICHIGAN STATE UNIVERSITY AND THE DEVELOPMENT OF SELECTED COURSES OF STUDY EMPLOYING THE NEWER MEDIA WERE REVIEWED.…

  2. A New Dryland Development Paradigm Grounded in Empirical Analysis of Dryland Systems Science

    NARCIS (Netherlands)

    Stringer, Lindsay C.; Reed, Mark S.; Fleskens, Luuk; Thomas, Richard J.; Le, Quang Bao; Lala-Pritchard, Tana

    2017-01-01

    Global drylands face a host of urgent human and environmental challenges with far-reaching impacts. Improving smallholder agriculture remains a key development pathway to tackle these challenges. The dryland development paradigm (DDP), introduced in 2007, presented a highly influential framework

  3. Advanced Telemetry System Development.

    Science.gov (United States)

    Progress in advanced telemetry system development is described. Discussions are included of studies leading to the specification for design...Progress indicates that further sophistication of existing designs in telemetry will be less advantageous than the development of new systems of

  4. Doing Systems Development

    DEFF Research Database (Denmark)

    Koch, Christian; Mathiasen, John Bang

    2014-01-01

    Systems development of wind turbine control is competitive with respect to innovation, time and cost. So how can learning possibly occur under such circumstances? Dewey’s pragmatist approach to learning is adopted, emphasising reciprocity between the systems developer’s individual experience...... and the sociotechnical practice. The framework involves the concepts of sociotechnical practice, anchoring of indeterminate situation, and strip of doings towards determinate situation. An ethnographic study was made of four cases of systems development and learning do occur in the cases, enabled by converging anchoring...... of the indeterminate situation and the systems developers different experience. However, an extreme case reveals initiated learning processes and that the interchanges between materiality of the artefacts and systems developers block the learning processes due to a customer with imprecise demands and unclear system...

  5. Data Processing System (DPS) software with experimental design, statistical analysis and data mining developed for use in entomological research.

    Science.gov (United States)

    Tang, Qi-Yi; Zhang, Chuan-Xi

    2013-04-01

    A comprehensive but simple-to-use software package called DPS (Data Processing System) has been developed to execute a range of standard numerical analyses and operations used in experimental design, statistics and data mining. This program runs on standard Windows computers. Many of the functions are specific to entomological and other biological research and are not found in standard statistical software. This paper presents applications of DPS to experimental design, statistical analysis and data mining in entomology. © 2012 The Authors Insect Science © 2012 Institute of Zoology, Chinese Academy of Sciences.

  6. Development, application, and sensitivity analysis of a water quality index for drinking water management in small systems.

    Science.gov (United States)

    Scheili, A; Rodriguez, Manuel J; Sadiq, R

    2015-11-01

    The aim of this study was to produce a drinking water assessment tool for operators of small distribution systems. A drinking water quality index (DWQI) was developed and applied to small systems based on the water quality index of the Canadian Council of Ministers of Environment. The drinking water quality index was adapted to specific needs by creating four drinking water quality scenarios. First, the temporal and spatial dimensions of drinking water quality variability were taken into account. The DWQI was designed to express global drinking water quality according to different monitoring frequencies. Daily, monthly, and seasonal assessment was also considered. With the data made available, it was possible to use the index as a spatial monitoring tool and express water quality in different points in the distribution system. Moreover, adjustments were made to prioritize the type of contaminant to monitor. For instance, monitoring contaminants with acute health effects led to a scenario based on daily measures, including easily accessible and affordable water quality parameters. On the other hand, contaminants with chronic effects, especially disinfection by-products, were considered in a seasonal monitoring scenario where disinfection by-product reference values were redefined according to their seasonal variability. A sensitivity analysis was also carried out to validate the index. Globally, the DWQI developed is adapted to the needs of small systems. In fact, expressing drinking water quality using the DWQI contributes to the identification of problematic periods and segments in the distribution system. Further work may include this index in the development of a customized decision-making tool for small-system operators and managers.

  7. LCA of waste management systems: Development of tools for modeling and uncertainty analysis

    DEFF Research Database (Denmark)

    Clavreul, Julie

    Since the late 1990s, life cycle assessment (LCA) has been increasingly applied to waste management to quantify direct, indirect and avoided impacts from various treatment options. The construction of inventories for waste management systems differs from classical product-LCAs in that (1) these s......Since the late 1990s, life cycle assessment (LCA) has been increasingly applied to waste management to quantify direct, indirect and avoided impacts from various treatment options. The construction of inventories for waste management systems differs from classical product-LCAs in that (1...

  8. Development of Mission and Spacecraft Dynamics Analysis System for Geostationary Communication Satellite

    Directory of Open Access Journals (Sweden)

    Hyeon Cheol Gong

    1998-06-01

    Full Text Available We consider the motion of the subsystems as separate bodies as well as the entire satellite for the attitude and orbit control of a communication satellite by multi-body modeling technique. Thus, the system can be applied to a general communication satellite as well as a specific communication satellite, i.e. Koreasat I, II. The simulation results can be viewed by two-dimensional graphics and three-dimensional animation. The graphical user interface (GUI makes its usage much simpler. We have simulated a couple of scenarios for Koreasat I, II which are being operated as geostationary communication satellites to verify the system performance.

  9. Longitudinal analysis on the development of hospital quality management systems in the Netherlands.

    NARCIS (Netherlands)

    Dückers, M.; Makai, P.; Vos, L.; Groenewegen, P.; Wagner, C.

    2009-01-01

    OBJECTIVE: Many changes have been initiated in the Dutch hospital sector to optimize health-care delivery: national agenda-setting, increased competition and transparency, a new system of hospital reimbursement based on diagnosis-treatment combinations, intensified monitoring of quality and a

  10. Catalyst development and systems analysis of methanol partial oxidation for the fuel processor - fuel cell integration

    Energy Technology Data Exchange (ETDEWEB)

    Newson, E.; Mizsey, P.; Hottinger, P.; Truong, T.B.; Roth, F. von; Schucan, Th.H. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    Methanol partial oxidation (pox) to produce hydrogen for mobile fuel cell applications has proved initially more successful than hydrocarbon pox. Recent results of catalyst screening and kinetic studies with methanol show that hydrogen production rates have reached 7000 litres/hour/(litre reactor volume) for the dry pox route and 12,000 litres/hour/(litre reactor volume) for wet pox. These rates are equivalent to 21 and 35 kW{sub th}/(litre reactor volume) respectively. The reaction engineering problems remain to be solved for dry pox due to the significant exotherm of the reaction (hot spots of 100-200{sup o}C), but wet pox is essentially isothermal in operation. Analyses of the integrated fuel processor - fuel cell systems show that two routes are available to satisfy the sensitivity of the fuel cell catalysts to carbon monoxide, i.e. a preferential oxidation reactor or a membrane separator. Targets for individual system components are evaluated for the base and best case systems for both routes to reach the combined 40% efficiency required for the integrated fuel processor - fuel cell system. (author) 2 figs., 1 tab., 3 refs.

  11. Development Discourses on the Educational System of Iran: A Critical Analysis of Their Effects

    Science.gov (United States)

    Mahdi Sajjadi, Seyed

    2015-01-01

    Three decades have passed since the victory of the Islamic Revolution in Iran and, entering the fourth decade, major changes are apparent in the structure and content of the nation's education system. Because of the victory of the Islamic Revolution of Iran and the regime change and formation of an Islamic state, the changes in the educational…

  12. Development of 3 D Electric Field Analysis Program under Power System Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Myung, S. H.; Lee, K. C.; Lee, J. B.; Ha, T. H. [Korea Electrotechnology Research Institute, Changwon (Korea, Republic of)

    1996-12-01

    Recently, as the effects of electric fields on animals, human beings and sensitive equipment have been reported, the study on electric fields has become more important. Transmission lines and substation among power facilities are dominant parts related to electrical environment. Electric field analysis of transmission line has been made using image charge method or CSM since 1970`s, however electric field analysis in substation has been rarely studied due to the complexity of three dimensional evaluation of an electric field in substation. For the rather complicated and time-consuming three-dimensional electric field calculation in the vicinity of transmission lines and substations, this study proposes an effective numerical calculation method based on Charge Simulation Method(CSM). In order to represent non-uniform charge distribution on an electrode better, it is subdivided into small segments with linear charge density. Each segment with linear charge density can be easily represented by a generalized finite line type of charge whose expressions for potential and electric field were analytically derived and which was named {sup f}inite slant line charge in this study. As for the arrangement of small segments of a subdivided electrode, it has been found that unequally spaced arrangement method is superior to equally spaced one. In order to arrange segments fast and effectively, effective formulas were derived from multiple regression analysis of many simulations. The proposed method is applied to the electric field calculation around the transmission lines with significant change in direction and substation busbars. (author). refs., figs., tabs.

  13. Recommendations arising from an analysis of changes to the Australian agricultural research, development and extension system

    NARCIS (Netherlands)

    Hunt, Warren; Birch, Colin; Vanclay, Frank; Coutts, Jeff

    The business of agricultural research, development and extension (RD&E) has undergone considerable change in Australia since the late 1980s, moving from a domain largely dominated by government departments to a situation of multiple actors, and where rural industries now directly contribute funds

  14. Information Management System Development for the Investigation, Reporting, and Analysis of Human Error in Naval Aviation Maintenance

    National Research Council Canada - National Science Library

    Nelson, Douglas

    2001-01-01

    The purpose of this research is to evaluate and refine a safety information management system that will facilitate data collection, organization, query, analysis and reporting of maintenance errors...

  15. Development and Analysis of a Resource-Aware Power Management System as Applied to Small Spacecraft

    Energy Technology Data Exchange (ETDEWEB)

    Shriver, Patrick [Univ. of Colorado, Boulder, CO (United States)

    2005-01-01

    In this thesis, an overall framework and solution method for managing the limited power resources of a small spacecraft is presented. Analogous to mobile computing technology, a primary limiting factor is the available power resources. In spite of the millions of dollars budgeted for research and development over decades, improvements in battery efficiency remains low. This situation is exacerbated by advances in payload technology that lead to increasingly power-hungry and data-intensive instruments. The challenge for the small spacecraft is to maximize capabilities and performance while meeting difficult design requirements and small project budgets.

  16. Analysis of the minimum swerving distance for the development of a motorcycle autonomous braking system.

    Science.gov (United States)

    Giovannini, Federico; Savino, Giovanni; Pierini, Marco; Baldanzini, Niccolò

    2013-10-01

    In the recent years the autonomous emergency brake (AEB) was introduced in the automotive field to mitigate the injury severity in case of unavoidable collisions. A crucial element for the activation of the AEB is to establish when the obstacle is no longer avoidable by lateral evasive maneuvers (swerving). In the present paper a model to compute the minimum swerving distance needed by a powered two-wheeler (PTW) to avoid the collision against a fixed obstacle, named last-second swerving model (Lsw), is proposed. The effectiveness of the model was investigated by an experimental campaign involving 12 volunteers riding a scooter equipped with a prototype autonomous emergency braking, named motorcycle autonomous emergency braking system (MAEB). The tests showed the performance of the model in evasive trajectory computation for different riding styles and fixed obstacles. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Opportunity Analysis for Developing a Micropayment System in Local Area Networks

    Directory of Open Access Journals (Sweden)

    Cristian GEORGESCU

    2012-04-01

    Full Text Available Although transactions with small amounts of cash are simple and quick, they still present drawbacks. The main issue is to drastically reduce costs for very small electronic payments and solutions have already started to be identified. In this paper, the proposed solution implies aggregating payments into a privately owned local area network that operates at low costs and making only one transfer to the banking systems for each buyer. The equipment used has to be easy to operate and straightforward, security procedures have to be simple and based on the rapport between the cost of fraud and the expected value obtained through fraud and rapports with the bank have to be kept within profitability margins.

  18. Instrumental Supporting System for Developing and Analysis of Software-Defined Networks of Mobile Objects

    Directory of Open Access Journals (Sweden)

    V. A. Sokolov

    2015-01-01

    Full Text Available This article describes the organization principles for wireless mesh-networks (software-defined net-works of mobile objects. The emphasis is on the questions of getting effective routing algorithms for such networks. The mathematical model of the system is the standard transportation network. The key parameter of the routing system is the node reachability coefficient — the function depending on several basic and additional parameters (“mesh-factors”, which characterize the route between two network nodes. Each pair (arc, node is juxtaposed to a composite parameter which characterizes the “reacha-bility” of the node by the route which begins with this arc. The best (“shortest” route between two nodes is the route with the maximum reachability coefficient. The rules of building and refreshing the routing tables by the network nodes are described. With the announcement from the neighbor the node gets the information about the connection energy and reliability, the announcement time of receipt, the absence of transitional nodes and also about the connection capability. On the basis of this informationthe node applies the penalization (decreasing the reachability coefficient or the reward (increasing the reachability coefficient to all routes through this neighbor node. The penalization / reward scheme has some separate aspects: 1. Penalization for the actuality of information. 2. Penalization / reward for the reliability of a node. 3. Penalization for the connection energy. 4. Penalization for the present connection capability. The simulator of the wireless mesh-network of mobile objects is written. It is based on the suggested heuristic algorithms. The description and characteristics of the simulator are stated in the article. The peculiarities of its program realization are also examined.

  19. Space Launch System Base Heating Test: Sub-Scale Rocket Engine/Motor Design, Development and Performance Analysis

    Science.gov (United States)

    Mehta, Manish; Seaford, Mark; Kovarik, Brian; Dufrene, Aaron; Solly, Nathan; Kirchner, Robert; Engel, Carl D.

    2014-01-01

    The Space Launch System (SLS) base heating test is broken down into two test programs: (1) Pathfinder and (2) Main Test. The Pathfinder Test Program focuses on the design, development, hot-fire test and performance analyses of the 2% sub-scale SLS core-stage and booster element propulsion systems. The core-stage propulsion system is composed of four gaseous oxygen/hydrogen RS-25D model engines and the booster element is composed of two aluminum-based model solid rocket motors (SRMs). The first section of the paper discusses the motivation and test facility specifications for the test program. The second section briefly investigates the internal flow path of the design. The third section briefly shows the performance of the model RS-25D engines and SRMs for the conducted short duration hot-fire tests. Good agreement is observed based on design prediction analysis and test data. This program is a challenging research and development effort that has not been attempted in 40+ years for a NASA vehicle.

  20. Development of a transportable neutron activation analysis system to quantify manganese in bone in vivo: feasibility and methodology.

    Science.gov (United States)

    Liu, Yingzi; Koltick, David; Byrne, Patrick; Wang, Haoyu; Zheng, Wei; Nie, Linda H

    2013-12-01

    This study was conducted to investigate the methodology and feasibility of developing a transportable neutron activation analysis (NAA) system to quantify manganese (Mn) in bone using a portable deuterium-deuterium (DD) neutron generator as the neutron source. Since a DD neutron generator was not available in our laboratory, a deuterium-tritium (DT) neutron generator was used to obtain experimental data and validate the results from Monte Carlo (MC) simulations. After validation, MC simulations using a DD generator as the neutron source were then conducted. Different types of moderators and reflectors were simulated, and the optimal thicknesses for the moderator and reflector were determined. To estimate the detection limit (DL) of the system, and to observe the interference of the magnesium (Mg) γ line at 844 keV to the Mn γ line at 847 keV, three hand phantoms with Mn concentrations of 30 parts per million (ppm), 150 ppm, and 500 ppm were made and irradiated by the DT generator system. The Mn signals in these phantoms were then measured using a 50% high-efficiency high-purity germanium (HPGe) detector. The DL was calculated to be about 4.4 ppm for the chosen irradiation, decay, and measurement time. This was calculated to be equivalent to a DL of about 3.3 ppm for the DD generator system. To achieve this DL with one 50% high-efficiency HPGe detector, the dose to the hand was simulated to be about 37 mSv, with the total body equivalent dose being about 23µSv. In conclusion, it is feasible to develop a transportable NAA system to quantify Mn in bone in vivo with an acceptable radiation exposure to the subject.

  1. Development and Utilization of mathematical Optimization in Advanced Fuel Cycle Systems Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Turinsky, Paul; Hays, Ross

    2011-09-02

    Over the past sixty years, a wide variety of nuclear power technologies have been theorized, investigated and tested to various degrees. These technologies, if properly applied, could provide a stable, long-term, economical source of CO2-free electric power. However, the recycling of nuclear fuel introduces a degree of coupling between reactor systems which must be accounted for when making long term strategic plans. This work investigates the use of a simulated annealing optimization algorithm coupled together with the VISION fuel cycle simulation model in order to identify attractive strategies from economic, evironmental, non-proliferation and waste-disposal perspectives, which each have associated an objective function. The simulated annealing optimization algorithm works by perturbing the fraction of new reactor capacity allocated to each available reactor type (using a set of heuristic rules) then evaluating the resulting deployment scenario outcomes using the VISION model and the chosen objective functions. These new scenarios, which are either accepted or rejected according the the Metropolis Criterion, are then used as the basis for further perturbations. By repeating this process several thousand times, a family of near-optimal solutions are obtained. Preliminary results from this work using a two-step, Once-through LWR to Full-recycle/FRburner deployment scenario with exponentially increasing electric demand indicate that the algorithm is capable of nding reactor deployment pro les that reduce the long-term-heat waste disposal burden relative to an initial reference scenario. Further work is under way to re ne the current results and to extend them to include the other objective functions and to examine the optimization trade-o s that exist between these di erent objectives.

  2. Developing Flexible, Integrated Hydrologic Modeling Systems for Multiscale Analysis in the Midwest and Great Lakes Region

    Science.gov (United States)

    Hamlet, A. F.; Chiu, C. M.; Sharma, A.; Byun, K.; Hanson, Z.

    2016-12-01

    Physically based hydrologic modeling of surface and groundwater resources that can be flexibly and efficiently applied to support water resources policy/planning/management decisions at a wide range of spatial and temporal scales are greatly needed in the Midwest, where stakeholder access to such tools is currently a fundamental barrier to basic climate change assessment and adaptation efforts, and also the co-production of useful products to support detailed decision making. Based on earlier pilot studies in the Pacific Northwest Region, we are currently assembling a suite of end-to-end tools and resources to support various kinds of water resources planning and management applications across the region. One of the key aspects of these integrated tools is that the user community can access gridded products at any point along the end-to-end chain of models, looking backwards in time about 100 years (1915-2015), and forwards in time about 85 years using CMIP5 climate model projections. The integrated model is composed of historical and projected future meteorological data based on station observations and statistical and dynamically downscaled climate model output respectively. These gridded meteorological data sets serve as forcing data for the macro-scale VIC hydrologic model implemented over the Midwest at 1/16 degree resolution. High-resolution climate model (4km WRF) output provides inputs for the analyses of urban impacts, hydrologic extremes, agricultural impacts, and impacts to the Great Lakes. Groundwater recharge estimated by the surface water model provides input data for fine-scale and macro-scale groundwater models needed for specific applications. To highlight the multi-scale use of the integrated models in support of co-production of scientific information for decision making, we briefly describe three current case studies addressing different spatial scales of analysis: 1) Effects of climate change on the water balance of the Great Lakes, 2) Future

  3. Evolutionary Information System Development

    DEFF Research Database (Denmark)

    Kristensen, Jan

    This paper offers advice to companies and professionals that implement e-commerce systems in business organizations. Implementing e-commerce systems is different from traditional IT implementation and thus requires a new set of tools and skills. The need for a novel approach is illustrated...... and necessary items that must be taken into account are pointed out by narrating two stories of e-commerce implementation processes in wholesale companies. The empirical evidence suggests the following: Managing the continued development on an operational level requires operational insight and understanding...... of business priorities. On a more theoretical level this suggests that we must revise our current understanding of systems development to cope....

  4. Power Systems Development Facility

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2009-01-31

    In support of technology development to utilize coal for efficient, affordable, and environmentally clean power generation, the Power Systems Development Facility (PSDF), located in Wilsonville, Alabama, has routinely demonstrated gasification technologies using various types of coals. The PSDF is an engineering scale demonstration of key features of advanced coal-fired power systems, including a Transport Gasifier, a hot gas particulate control device, advanced syngas cleanup systems, and high-pressure solids handling systems. This final report summarizes the results of the technology development work conducted at the PSDF through January 31, 2009. Twenty-one major gasification test campaigns were completed, for a total of more than 11,000 hours of gasification operation. This operational experience has led to significant advancements in gasification technologies.

  5. Exergy and energy analysis of three stage auto refrigerating cascade system using Zeotropic mixture for sustainable development

    International Nuclear Information System (INIS)

    Sivakumar, M.; Somasundaram, P.

    2014-01-01

    Highlights: • Zeotropic mixture of R290/R23/R14 works with 22.6% increased exergic efficiency. • Zeotropic mixture of mass fraction 0.218:0.346:0.436 offers COP of 0.253. • Since emphasis on COP, evaporating temperature 0.253 COP became the only alternate. • This is the only alternate refrigerant mixture for three stage ARC system at −97 °C. - Abstract: The Zeotropic mixture of environment friendly refrigerants (HC’s and HFC’s) being the only alternatives for working fluid in low temperature refrigeration system and hence three stage auto refrigerating cascade (ARC) system was studied for the existence using two combinations of (R290/R23/R14, R1270/R170/R14) three component Zeotropic mixture of five different refrigerants. The exergy analysis confirmed the existence of three stage ARC system. The performances of the system like Coefficient of Performance (COP), exergy lost, exergic efficiency, efficiency defect and the evaporating temperature achieved were investigated for different mass fractions in order to verify the effect of mass fraction on them. In accordance with the environmental issues and the process of sustainable development, the three component Zeotropic mixture of R290/R23/R14 with the mass fraction of 0.218:0.346:0.436 was performing better and hence can be suggested as an alternative refrigerant for three stage ARC system operating at very low evaporating temperature in the range of 176 K (−97 °C) at COP of 0.253 with 58.5% exergic efficiency (comparatively 22.6% increased value)

  6. Development of a multi-dimensional realistic thermal-hydraulic system analysis code, MARS 1.3 and its verification

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Jae; Chung, Bub Dong; Jeong, Jae Jun; Ha, Kwi Seok [Korea Atomic Energy Research Institute, Taejon (Korea)

    1998-06-01

    A multi-dimensional realistic thermal-hydraulic system analysis code, MARS version 1.3 has been developed. Main purpose of MARS 1.3 development is to have the realistic analysis capability of transient two-phase thermal-hydraulics of Pressurized Water Reactors (PWRs) especially during Large Break Loss of Coolant Accidents (LBLOCAs) where the multi-dimensional phenomena domain the transients. MARS code is a unified version of USNRC developed COBRA-TF, domain the transients. MARS code is a unified version of USNRC developed COBRA-TF, three-dimensional (3D) reactor vessel analysis code, and RELAP5/MOD3.2.1.2, one-dimensional (1D) reactor system analysis code., Developmental requirements for MARS are chosen not only to best utilize the existing capability of the codes but also to have the enhanced capability in code maintenance, user accessibility, user friendliness, code portability, code readability, and code flexibility. For the maintenance of existing codes capability and the enhancement of code maintenance capability, user accessibility and user friendliness, MARS has been unified to be a single code consisting of 1D module (RELAP5) and 3D module (COBRA-TF). This is realized by implicitly integrating the system pressure matrix equations of hydrodynamic models and solving them simultaneously, by modifying the 1D/3D calculation sequence operable under a single Central Processor Unit (CPU) and by unifying the input structure and the light water property routines of both modules. In addition, the code structure of 1D module is completely restructured using the modular data structure of standard FORTRAN 90, which greatly improves the code maintenance capability, readability and portability. For the code flexibility, a dynamic memory management scheme is applied in both modules. MARS 1.3 now runs on PC/Windows and HP/UNIX platforms having a single CPU, and users have the options to select the 3D module to model the 3D thermal-hydraulics in the reactor vessel or other

  7. Analysis of life cycle assessment of food/energy/waste systems and development and analysis of microalgae cultivation/wastewater treatment inclusive system

    Science.gov (United States)

    Armstrong, Kristina Ochsner

    Across the world, crises in food, energy, land and water resources, as well as waste and greenhouse gas accumulation are inspiring research into the interactions among these environmental pressures. In the food/energy/waste problem set, most of the research is focused on describing the antagonistic relationships between food, energy and waste; these relationships are often analyzed with life cycle assessment (LCA). These analyses often include reporting of metrics of environmental performance with few functional units, often focusing on energy use, productivity and environmental impact while neglecting water use, food nutrition and safety. Additionally, they are often attributional studies with small scope which report location-specific parameters only. This thesis puts forth a series of recommendations to amend the current practice of LCA to combat these limitations and then utilizes these suggestions to analyze a synergistic food/waste/energy system. As an example analysis, this thesis describes the effect of combining wastewater treatment and microalgae cultivation on the productivity and scalability of the synergistic system. To ameliorate the high nutrient and water demands of microalgae cultivation, many studies suggest that microalgae be cultivated in wastewater so as to achieve large scale and low environmental costs. While cultivation studies have found this to be true, none explore the viability of the substitution in terms of productivity and scale-up. The results of this study suggest that while the integrated system may be suitable for low-intensity microalgae cultivation, for freshwater microalgae species or wastewater treatment it is not suitable for high intensity salt water microalgae cultivation. This study shows that the integration could result in reduced lipid content, high wastewater requirements, no greenhouse gas emissions benefit and only a small energy benefit.

  8. Fiscal 1998 survey report. Medical equipment (Development of fine sampling/analysis system for blood / Development of high-precision 3-D image diagnosis system / Development of low-invasion operation support system / Total development of artificial internal organ technologies); 1998 nendo chosa hokokusho. Iryo kiki (ketsuekinado biryo saishu, biryo bunseki system kaihatsu/koseido sanjigen eizo shindan system kaihatsu/teishinshu shujutsu shien system kaihatsu/jinko zoki gijutsu sogo kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For efficient medical care supply systems, the R and D of advanced medical care technology and equipment largely contribute to productivity improvement for medical care services. Among them, a progress of medical care technology is becoming important for preparation of efficient and fair supply systems. MITI thus established 'Medical care and welfare equipment development project' in 1994, and has promoted the strategic long-term R and D project of medical care and welfare equipment as joint R and D project of NEDO and private enterprises. In fiscal 1998, on the development of the fine sampling/analysis system for blood, the high- precision 3-D image diagnosis system, the low-invasion operation support system, and the artificial internal organ technologies since fiscal 1996, this project clarified essential technical issues based on the future view, selected some themes to be newly developed in the future, and surveyed and evaluated the details of their R and D concretely. (NEDO)

  9. Development of a new real-time GNSS data analysis system in GEONET for rapid Mw estimates in Japan

    Science.gov (United States)

    Kawamoto, S.; Miyagawa, K.; Yahagi, T.; Yamaguchi, K.; Tsuji, H.; Nishimura, T.; Ohta, Y.; Hino, R.; Miura, S.

    2013-12-01

    The 2011 off the Pacific Coast of Tohoku Earthquake (Mw 9.0) occurred on March 11, 2011. The earthquake and following tsunami caused serious damages to the broad coastal area of east Japan. Japan Meteorological Agency (JMA) operates the Tsunami Warning system, which is designed to forecast the tsunami height and its arrival time around 3 minutes after a large event. However, the first estimated magnitude of Mj, which was used for Tsunami Warning issuance, was far below the real one at the Tohoku event because of a saturation problem. In principle, as well as most other magnitude scales, Mj is saturated at certain values around 8.0. On the other hand, Mw represents the earthquake energy itself and it can be directly calculated by permanent displacements derived from geodetic measurements without the saturation problem. GNSS Earth Observation Network System (GEONET) is one of the densest real-time GNSS networks in the world operated by Geospatial Information Authority of Japan (GSI). The GEONET data and recent rapid advancement of GNSS analysis techniques motivate us to develop a new system for tackling the tsunami disasters. In order to provide the more reliable magnitude for Tsunami Warning, GSI and Tohoku University have jointly developed a new real-time analysis system in GEONET for quasi real-time Mw estimation. Its targets are large earthquakes, especially ones of Mw > 8.0, which would be saturated by the Tsunami Warning system. The real-time analysis system in GEONET mainly consists of three parts: (1) real-time GNSS positioning, (2) automated extraction of displacement fields due to the large earthquake, and (3) automated estimation of Mw by an approximated single rectangular fault. The positions of each station are calculated by using RTKLIB 2.4.1 (Takasu, 2011) with the baseline mode and the predicted part of the IGS Ultra Rapid precise orbit. For the event detection, we adopt the 'RAPiD' algorithm (Ohta et al., 2012) or Earthquake Early Warning issued by

  10. National Research Council Dialogue to Assess Progress on NASA's Systems Engineering Cost/Risk Analysis Capability Roadmap Development: General Background and Introduction

    Science.gov (United States)

    Regenie, Victoria

    2005-01-01

    Contents include the following: General Background and Introduction of Capability. Roadmaps for Systems Engineering Cost/Risk Analysis. Agency Objectives. Strategic Planning Transformation. Review Capability Roadmaps and Schedule. Review Purpose of NRC Review. Capability Roadmap Development (Progress to Date).

  11. Development of Production Systems

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    1997-01-01

    This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

  12. Development of a strategy for energy efficiency improvement in a Kraft process based on systems interactions analysis

    Science.gov (United States)

    Mateos-Espejel, Enrique

    The objective of this thesis is to develop, validate, and apply a unified methodology for the energy efficiency improvement of a Kraft process that addresses globally the interactions of the various process systems that affect its energy performance. An implementation strategy is the final result. An operating Kraft pulping mill situated in Eastern Canada with a production of 700 adt/d of high-grade bleached pulp was the case study. The Pulp and Paper industry is Canada's premier industry. It is characterized by large thermal energy and water consumption. Rising energy costs and more stringent environmental regulations have led the industry to refocus its efforts toward identifying ways to improve energy and water conservation. Energy and water aspects are usually analyzed independently, but in reality they are strongly interconnected. Therefore, there is a need for an integrated methodology, which considers energy and water aspects, as well as the optimal utilization and production of the utilities. The methodology consists of four successive stages. The first stage is the base case definition. The development of a focused, reliable and representative model of an operating process is a prerequisite to the optimization and fine tuning of its energy performance. A four-pronged procedure has been developed: data gathering, master diagram, utilities systems analysis, and simulation. The computer simulation has been focused on the energy and water systems. The second stage corresponds to the benchmarking analysis. The benchmarking of the base case has the objectives of identifying the process inefficiencies and to establish guidelines for the development of effective enhancement measures. The studied process is evaluated by a comparison of its efficiency to the current practice of the industry and by the application of new energy and exergy content indicators. The minimum energy and water requirements of the process are also determined in this step. The third stage is

  13. DART system analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Boggs, Paul T.; Althsuler, Alan (Exagrid Engineering); Larzelere, Alex R. (Exagrid Engineering); Walsh, Edward J.; Clay, Ruuobert L.; Hardwick, Michael F. (Sandia National Laboratories, Livermore, CA)

    2005-08-01

    The Design-through-Analysis Realization Team (DART) is chartered with reducing the time Sandia analysts require to complete the engineering analysis process. The DART system analysis team studied the engineering analysis processes employed by analysts in Centers 9100 and 8700 at Sandia to identify opportunities for reducing overall design-through-analysis process time. The team created and implemented a rigorous analysis methodology based on a generic process flow model parameterized by information obtained from analysts. They also collected data from analysis department managers to quantify the problem type and complexity distribution throughout Sandia's analyst community. They then used this information to develop a community model, which enables a simple characterization of processes that span the analyst community. The results indicate that equal opportunity for reducing analysis process time is available both by reducing the ''once-through'' time required to complete a process step and by reducing the probability of backward iteration. In addition, reducing the rework fraction (i.e., improving the engineering efficiency of subsequent iterations) offers approximately 40% to 80% of the benefit of reducing the ''once-through'' time or iteration probability, depending upon the process step being considered. Further, the results indicate that geometry manipulation and meshing is the largest portion of an analyst's effort, especially for structural problems, and offers significant opportunity for overall time reduction. Iteration loops initiated late in the process are more costly than others because they increase ''inner loop'' iterations. Identifying and correcting problems as early as possible in the process offers significant opportunity for time savings.

  14. An activity theory analysis of boundary objects in cross-border information systems development for disaster management

    NARCIS (Netherlands)

    Bharosa, N.; Lee, J.; Janssen, M.; Rao, H.R.

    2012-01-01

    One of the main challenges in cross-border disaster management is the development and use of information systems that cater the needs of heterogeneous relief agencies, policies, activities and cultures. Drawing upon activity theory, this paper examines cross-border information systems development

  15. Earth System Model Development and Analysis using FRE-Curator and Live Access Servers: On-demand analysis of climate model output with data provenance.

    Science.gov (United States)

    Radhakrishnan, A.; Balaji, V.; Schweitzer, R.; Nikonov, S.; O'Brien, K.; Vahlenkamp, H.; Burger, E. F.

    2016-12-01

    There are distinct phases in the development cycle of an Earth system model. During the model development phase, scientists make changes to code and parameters and require rapid access to results for evaluation. During the production phase, scientists may make an ensemble of runs with different settings, and produce large quantities of output, that must be further analyzed and quality controlled for scientific papers and submission to international projects such as the Climate Model Intercomparison Project (CMIP). During this phase, provenance is a key concern:being able to track back from outputs to inputs. We will discuss one of the paths taken at GFDL in delivering tools across this lifecycle, offering on-demand analysis of data by integrating the use of GFDL's in-house FRE-Curator, Unidata's THREDDS and NOAA PMEL's Live Access Servers (LAS).Experience over this lifecycle suggests that a major difficulty in developing analysis capabilities is only partially the scientific content, but often devoted to answering the questions "where is the data?" and "how do I get to it?". "FRE-Curator" is the name of a database-centric paradigm used at NOAA GFDL to ingest information about the model runs into an RDBMS (Curator database). The components of FRE-Curator are integrated into Flexible Runtime Environment workflow and can be invoked during climate model simulation. The front end to FRE-Curator, known as the Model Development Database Interface (MDBI) provides an in-house web-based access to GFDL experiments: metadata, analysis output and more. In order to provide on-demand visualization, MDBI uses Live Access Servers which is a highly configurable web server designed to provide flexible access to geo-referenced scientific data, that makes use of OPeNDAP. Model output saved in GFDL's tape archive, the size of the database and experiments, continuous model development initiatives with more dynamic configurations add complexity and challenges in providing an on

  16. Systems engineering and analysis

    CERN Document Server

    Blanchard, Benjamin S

    2010-01-01

    For senior-level undergraduate and first and second year graduate systems engineering and related courses. A total life-cycle approach to systems and their analysis. This practical introduction to systems engineering and analysis provides the concepts, methodologies, models, and tools needed to understand and implement a total life-cycle approach to systems and their analysis. The authors focus first on the process of bringing systems into being--beginning with the identification of a need and extending that need through requirements determination, functional analysis and allocation, design synthesis, evaluation, and validation, operation and support, phase-out, and disposal. Next, the authors discuss the improvement of systems currently in being, showing that by employing the iterative process of analysis, evaluation, feedback, and modification, most systems in existence can be improved in their affordability, effectiveness, and stakeholder satisfaction.

  17. Open quantum systems recent developments

    CERN Document Server

    Joye, Alain; Pillet, Claude-Alain

    2006-01-01

    Understanding dissipative dynamics of open quantum systems remains a challenge in mathematical physics. This problem is relevant in various areas of fundamental and applied physics. From a mathematical point of view, it involves a large body of knowledge. Significant progress in the understanding of such systems has been made during the last decade. These books present in a self-contained way the mathematical theories involved in the modeling of such phenomena. They describe physically relevant models, develop their mathematical analysis and derive their physical implications. In Volume I the Hamiltonian description of quantum open systems is discussed. This includes an introduction to quantum statistical mechanics and its operator algebraic formulation, modular theory, spectral analysis and their applications to quantum dynamical systems. Volume II is dedicated to the Markovian formalism of classical and quantum open systems. A complete exposition of noise theory, Markov processes and stochastic differential...

  18. Development of speciation analysis methods for radionuclides. Connecting tests for ICP-MS with various liquid chromatography systems

    International Nuclear Information System (INIS)

    Takaku, Yuichi; Kakiuchi, Hideki; Ohtsuka, Yoshihito; Hisamatsu, Shunichi; Inaba, Jiro

    2002-01-01

    Analytical methods for physicochemical speciation for radionuclides and related elements, such as lanthanides, actinides and transition metals, in environmental samples are developed to elucidate behavior of radioactive materials in the environment. Inductively coupled plasma mass spectrometry was combined with high performance liquid chromatography such as size exclusion (SEC), ion exchange (IC) or capillary electrophoresis (CE). The IC and CE are used to separate chemical species of small molecular size. Large organic molecule-metal complexes are analyzed by SEC and CE. In this paper, analytical results of rare earth elements (REE) are reported for fresh water samples using SEC-ICP-MS. Preliminary tests results obtained by IC- and CE-ICP-MS are also given. Target substances in fresh water samples are separated by an ultra filtration technique according to their molecular size. After filtration, samples with large molecules were introduced to SEC-ICP-MS. The SEC column was ZORBAX GF-250 (Agirent). Tri-HNO 3 buffer solution (pH 7.3) was used as a mobile phase instead of inorganic salt buffer in order to avoid clogging of the nebulizer torch in the ICP-MS system. In water samples collected at Sakyo Marsh (Higashidori-mura), three UV absorption peaks were found at molecular weights of 700, 100 and 20 kDa. REE were detected online by SEC-ICP-MS at 20 kDa. The results suggested that many REE are present as the large organic molecule-metal complexes in this marsh. Preliminary connection tests of IC and CE chromatography systems to the ICP-MS were made. Stepwise analysis technique of all lanthanides (La to Lu) was developed using IC-ICP-MS. IC column was Excelpak ICS C-15 (Agirent). MIBA buffer solution was used as a mobile phase. In the analysis, the MIBA concentration was changed stepwise from 70 to 400 mM. The total analysis time was 1800 sec. Also, arsenic chemical species of As(III) to As(V) were separated by CE-ICP-MS. Detection limit of each As species was 10 pg g

  19. Development of a Matlab/Simulink tool to facilitate system analysis and simulation via the adjoint and covariance methods

    NARCIS (Netherlands)

    Bucco, D.; Weiss, M.

    2007-01-01

    The COVariance and ADjoint Analysis Tool (COVAD) is a specially designed software tool, written for the Matlab/Simulink environment, which allows the user the capability to carry out system analysis and simulation using the adjoint, covariance or Monte Carlo methods. This paper describes phase one

  20. Shotgun proteomic analysis of Bombyx mori brain: emphasis on regulation of behavior and development of the nervous system.

    Science.gov (United States)

    Wang, Guo-Bao; Zheng, Qin; Shen, Yun-Wang; Wu, Xiao-Feng

    2016-02-01

    The insect brain plays crucial roles in the regulation of growth and development and in all types of behavior. We used sodium dodecyl sulfate polyacrylamide gel electrophoresis and high-performance liquid chromatography - electron spray ionization tandem mass spectrometry (ESI-MS/MS) shotgun to identify the proteome of the silkworm brain, to investigate its protein composition and to understand their biological functions. A total of 2210 proteins with molecular weights in the range of 5.64-1539.82 kDa and isoelectric points in the range of 3.78-12.55 were identified. These proteins were annotated according to Gene Ontology Annotation into the categories of molecular function, biological process and cellular component. We characterized two categories of proteins: one includes behavior-related proteins involved in the regulation of behaviors, such as locomotion, reproduction and learning; the other consists of proteins related to the development or function of the nervous system. The identified proteins were classified into 283 different pathways according to KEGG analysis, including the PI3K-Akt signaling pathway which plays a crucial role in mediating survival signals in a wide range of neuronal cell types. This extensive protein profile provides a basis for further understanding of the physiological functions in the silkworm brain. © 2014 Institute of Zoology, Chinese Academy of Sciences.

  1. Development of a risk analysis model. Appendix F. District heating and cooling system case study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-10-01

    The risk analysis reported in this appendix was concerned with a business venture in the area of district energy systems using thermal energy cogenerated at existing electric power plants. After an introductory section, Section 2, Institutional Issues, discusses investment decisions and regulatory constraints and issues; Section 3 reviews public utility company objectives and investment analysis approach; Section 4 reviews the case study of district heating and cooling systems (DHCS) in Washington, DC; Section 5 results of the Minneapolis/St. Paul case DHCS study; Section 6 summarizes the desired risk-analysis methodology for evaluating regulated utility investment decisions; and Section 7 presents overall conclusions. (MCW)

  2. Karst development of an evaporitic system and its hydrogeological implications inferred from GIS-based analysis and tracing techniques

    Directory of Open Access Journals (Sweden)

    José M. Gil-Márquez

    2017-06-01

    Full Text Available The geomorphological characteristics and hydrogeological functioning of a geologically heterogeneous evaporitic karst plateau in Southern Spain were studied. Land surface information (LiDAR data was used to analyze the shape and distribution of closed depressions. An artificial tracer test and monitoring of the natural responses of the main spring have allowed to infer the karstic development of the studied system. Three dyes were injected in selected swallow holes to trace the main groundwater flowpaths and to estimate the dimension of the conduit network. Discharge, electrical conductivity and temperature were monitored in the groundwater that drains the evaporitic plateau during an individual and intense recharge pulse. Tracing techniques were adapted to high salinity environments by using specific calibration standards (NaCl + dye. The hydrological connection detected between two of the swallow holes and the outlet, and the deduced orientation pattern for closed areas, would suggest that the karst evolution (internal and external is related to fault orientation. The rapid tracer detection (16-20 h and high estimated maximum flow velocities (125-192 m/h, together with the fast impulsional response of the controlled physical-chemical parameters in spring waters (~15-16 h demonstrate the existence of quick flows under recharge conditions with well-defined system drainage, indicating a high degree of internal karstification (estimated master conduit diameter ~1.5 m. However, flooding of the depressions feeding swallow holes and analysis of the spring response times from natural and artificial tracers point to a restriction of the system´s drainage, most likely due to the constrained morphology of the karst conduits. This results in sustained recharge periods and delayed spring responses of some parameters, highlighting the relevant role of concentrated recharge in the hydrogeological behavior of the studied evaporitic karst.

  3. Energy efficiency system development

    Science.gov (United States)

    Leman, A. M.; Rahman, K. A.; Chong, Haw Jie; Salleh, Mohd Najib Mohd; Yusof, M. Z. M.

    2017-09-01

    By subjecting to the massive usage of electrical energy in Malaysia, energy efficiency is now one of the key areas of focus in climate change mitigation. This paper focuses on the development of an energy efficiency system of household electrical appliances for residential areas. Distribution of Questionnaires and pay a visit to few selected residential areas are conducted during the fulfilment of the project as well as some advice on how to save energy are shared with the participants. Based on the collected data, the system developed by the UTHM Energy Team is then evaluated from the aspect of the consumers' behaviour in using electrical appliances and the potential reduction targeted by the team. By the end of the project, 60% of the participants had successfully reduced the electrical power consumption set by the UTHM Energy Team. The reasons for whether the success and the failure is further analysed in this project.

  4. Development of a fully automated software system for rapid analysis/processing of the falling weight deflectometer data.

    Science.gov (United States)

    2009-02-01

    The Office of Special Investigations at Iowa Department of Transportation (DOT) collects FWD data on regular basis to evaluate pavement structural conditions. The primary objective of this study was to develop a fully-automated software system for ra...

  5. Development Methodology of a Cyber Security Risk Analysis and Assessment Tool for Digital I and C Systems in Nuclear Power Plant

    International Nuclear Information System (INIS)

    Cha, K. H.; Lee, C. K.; Song, J. G.; Lee, Y. J.; Kim, J. Y.; Lee, J. W.; Lee, D. Y.

    2011-01-01

    With the use of digital computers and communication networks the hot issues on cyber security were raised about 10 years ago. The scope of cyber security application has now been extended from the safety Instrumentation and Control (I and C) system to safety important systems, plant security system, and emergency preparedness system. Therefore, cyber security should be assessed and managed systematically throughout the development life cycle of I and C systems in order for their digital assets to be protected from cyber attacks. Fig. 1 shows the concept of a cyber security risk management of digital I and C systems in nuclear power plants (NPPs). A lot of cyber security risk assessment methods, techniques, and supported tools have been developed for Information Technology (IT) systems, but they have not been utilized widely for cyber security risk assessments of the digital I and C systems in NPPs. The main reason is a difference in goals between IT systems and nuclear I and C systems. Confidentiality is important in IT systems, but availability and integrity are important in nuclear I and C systems. Last year, it was started to develop a software tool to be specialized for the development process of nuclear I and C systems. This paper presents a development methodology of the Cyber Security Risk analysis and Assessment Tool (CSRAT) for the digital I and C systems in NPP

  6. Development of an evaluation method for seismic isolation systems of nuclear power facilities. Seismic design analysis methods for crossover piping system

    International Nuclear Information System (INIS)

    Tai, Koichi; Sasajima, Keisuke; Fukushima, Shunsuke; Takamura, Noriyuki; Onishi, Shigenobu

    2014-01-01

    This paper provides seismic design analysis methods suitable for crossover piping system, which connects between seismic isolated building and non-isolated building in the seismic isolated nuclear power plant. Through the numerical study focused on the main steam crossover piping system, seismic response spectrum analysis applying ISM (Independent Support Motion) method with SRSS combination or CCFS (Cross-oscillator, Cross-Floor response Spectrum) method has found to be quite effective for the seismic design of multiply supported crossover piping system. (author)

  7. Systems analysis-independent analysis and verification

    Energy Technology Data Exchange (ETDEWEB)

    Badin, J.S.; DiPietro, J.P. [Energetics, Inc., Columbia, MD (United States)

    1995-09-01

    The DOE Hydrogen Program is supporting research, development, and demonstration activities to overcome the barriers to the integration of hydrogen into the Nation`s energy infrastructure. Much work is required to gain acceptance of hydrogen energy system concepts and to develop them for implementation. A systems analysis database has been created that includes a formal documentation of technology characterization profiles and cost and performance information. Through a systematic and quantitative approach, system developers can understand and address important issues and thereby assure effective and timely commercial implementation. This project builds upon and expands the previously developed and tested pathway model and provides the basis for a consistent and objective analysis of all hydrogen energy concepts considered by the DOE Hydrogen Program Manager. This project can greatly accelerate the development of a system by minimizing the risk of costly design evolutions, and by stimulating discussions, feedback, and coordination of key players and allows them to assess the analysis, evaluate the trade-offs, and to address any emerging problem areas. Specific analytical studies will result in the validation of the competitive feasibility of the proposed system and identify system development needs. Systems that are investigated include hydrogen bromine electrolysis, municipal solid waste gasification, electro-farming (biomass gasifier and PEM fuel cell), wind/hydrogen hybrid system for remote sites, home electrolysis and alternate infrastructure options, renewable-based electrolysis to fuel PEM fuel cell vehicle fleet, and geothermal energy used to produce hydrogen. These systems are compared to conventional and benchmark technologies. Interim results and findings are presented. Independent analyses emphasize quality, integrity, objectivity, a long-term perspective, corporate memory, and the merging of technical, economic, operational, and programmatic expertise.

  8. Developments in ecology in systems analysis and land-use planning. Environmental Sciences Division Publication No. 1074

    Energy Technology Data Exchange (ETDEWEB)

    Shugart, H. H.; Klopatek, J. M.; Emanuel, W. R.

    1977-09-01

    The need for ecological analysis in land-use planning has become increasingly evident as mans' land-intensive activities continually lead to conflict or to difficult decisions. Systems-analysis techniques useful in land-use planning are discussed. Particular emphasis is placed on ecological and environmental aspects of the problem. Three particular approaches to different parts of the overall land-use problem are given as examples of the application of systems analysis in this area. Simulation models for forest succession at the stand and landscape level provide a tool for studying natural land-use transition. Energy-based models are used to analyze the land-use plan for an area where mans' activities dominate. Finally, multiple objective optimization is discussed as a framework for planning, which allows the consideration of trade-offs between conflicting planning criteria and integrates decision makers in the analysis. 80 references.

  9. Development of Education Support System for Numerical Electromagnetic Analysis Based on Server-Client Model using Java

    Science.gov (United States)

    Ohchi, Masashi; Furukawa, Tatsuya; Tanaka, Shin-Ichiro

    Among several numerical methods, a Finite Element Method (FEM) has been adopted in various engineering problems. In such a background, it is necessary to instruct university students in the numerical analysis. The authors have designed and implemented the numerical analysis education support system for learning electromagnetic fields with Graphical User Interface (GUI) based on the server-client model using Java. In the paper, a feasibility study on the student laboratory class in the third year is described.

  10. Rapid analysis of genetically modified organisms by in-house developed capillary electrophoresis chip and laser-induced fluorescence system.

    Science.gov (United States)

    Obeid, Pierre J; Christopoulos, Theodore K; Ioannou, Penelope C

    2004-03-01

    A microfabricated, inexpensive, reusable glass capillary electrophoresis chip and a laser-induced fluorescence system were developed in-house for the rapid DNA-based analysis of genetically modified organisms (GMOs). The 35S promoter sequence of cauliflower mosaic virus and the terminator of the nopaline synthase (NOS) gene from Agrobacterium tumefaciens were both detected since they are present in most genetically modified organisms. The detection of genetically modified soybean in the presence of unaltered soybean was chosen as a model. Lectin, a plant-specific gene, was also detected for confirmation of the integrity of extracted DNA. The chip was composed of two glass plates, each 25 x 76 mm, thermally bonded together to form a closed structure. Photomasks with cross-topology were prepared rapidly by using polymeric material instead of chrome plates. The widths of the injection and separation channels were 30 and 70 microm, respectively, the effective separation length 4.5 cm. The glass slide was etched to a depth of 30 microm for both the injection and separation channel. The cost of the chip was less than 1 $ and required 2 days for photomask preparation and microfabrication. The separation and detection of polymerase chain reaction-amplified NOS, 35S, and lectin sequences (180, 195, and 181 bp, respectively) was completed in less than 60 s. As low as 0.1% GMO content was detectable by the proposed system after 35 and 40 amplification cycles for 35S and NOS, respectively, using 25 ng of extracted DNA as starting material. This corresponds to only 20 genome copies of genetically modified soybean.

  11. Developing a HACCP-like system for improving animal health and welfare in organic egg production - based on an expert panel analysis

    DEFF Research Database (Denmark)

    Hegelund, Lene; Sørensen, Jan Tind

    2007-01-01

    In the process of developing a generic Hazard Analysis and Critical Control Point (HACCP)-like system for securing animal health and welfare in organic egg production, an expert panel analysis was used to perform the initial hazard analysis. Eighteen advisers and researchers in organic egg...... production were included in the expert panel. In a series of four questionnaires, the expert panel first scored 34 health and welfare problems seen in Danish organic egg production. Based on scorings of severity and occurrence, 10 problems were selected for further analysis. The experts subsequently...... specific systems. An expert panel analysis based on questionnaires was a useful tool during the first steps of developing a HACCP plan, conducting a hazard analysis and suggesting control points. However, care should be taken regarding the panel's size and fields of expertise in order to assure...

  12. SUBSURFACE CONSTRUCTION AND DEVELOPMENT ANALYSIS

    International Nuclear Information System (INIS)

    N.E. Kramer

    1998-01-01

    The purpose of this analysis is to identify appropriate construction methods and develop a feasible approach for construction and development of the repository subsurface facilities. The objective of this analysis is to support development of the subsurface repository layout for License Application (LA) design. The scope of the analysis for construction and development of the subsurface Repository facilities covers: (1) Excavation methods, including application of knowledge gained from construction of the Exploratory Studies Facility (ESF). (2) Muck removal from excavation headings to the surface. This task will examine ways of preventing interference with other subsurface construction activities. (3) The logistics and equipment for the construction and development rail haulage systems. (4) Impact of ground support installation on excavation and other construction activities. (5) Examination of how drift mapping will be accomplished. (6) Men and materials handling. (7) Installation and removal of construction utilities and ventilation systems. (8) Equipping and finishing of the emplacement drift mains and access ramps to fulfill waste emplacement operational needs. (9) Emplacement drift and access mains and ramps commissioning prior to handover for emplacement operations. (10) Examination of ways to structure the contracts for construction of the repository. (11) Discussion of different construction schemes and how to minimize the schedule risks implicit in those schemes. (12) Surface facilities needed for subsurface construction activities

  13. Retrospective analysis of patients for development of nephrogenic systemic fibrosis following conventional angiography using gadolinium-based contrast agents

    Energy Technology Data Exchange (ETDEWEB)

    Hoppe, Hanno; Spagnuolo, Sara; Froehlich, Johannes M.; Thoeny, Harriet C. [University Hospital Bern, Institute of Diagnostic, Interventional, and Pediatric Radiology, Inselspital, Bern (Switzerland); Nievergelt, Helga [University Hospital Bern, Clinic of Dermatology, Bern (Switzerland); Dinkel, Hans-Peter [Hospital Landshut, Institute of Diagnostic and Interventional Radiology, Landshut (Germany); Gretener, Silvia [University Hospital of Bern, Division of Vascular Medicine, Swiss Cardiovascular Center, Bern (Switzerland)

    2010-03-15

    The purpose was to retrospectively review the data of 27 patients with renal insufficiency who underwent conventional angiography with gadolinium-based contrast agents (GDBCA) as alternative contrast agents and assess the occurrence of nephrogenic systemic fibrosis (NSF) together with associated potential risk factors. This HIPAA-compliant study had institutional review board approval, and informed consent was waived. Statistical analysis was performed for all available laboratory and clinical data, including dermatology reports. Type and amount of the GDBCA used were recorded for angiography and additional MRI studies, if applicable. Serum creatinine levels (SCr) pre- and post-angiography were recorded, and estimated glomerular filtration rates (eGFR) were calculated. Ten female and 17 male patients who underwent angiography with GDBCA were included. The mean amount of GDBCA administered was 44 {+-} 15.5 ml (range 15-60 ml) or 0.24 + 0.12 mmol/kg (range 0.1-0.53 mmol/kg). At the time of angiography all patients had renal insufficiency (eGFR <60 ml/min/1.73 m{sup 2}). Mean eGFR pre-angiography was 26 ml/min/1.73 m{sup 2} and 33 ml/min/1.73 m{sup 2} post-angiography. The mean follow-up period covers 28 months, range 1-84 months. Additional MRI studies with GDBCA administration were performed in 15 patients. One patient with typical skin lesions had developed biopsy-confirmed NSF. Conventional arterial angiography with GDBCA may play a role in the development of NSF in patients with renal insufficiency. Alternative contrast agents, such as CO{sub 2} angiography or rather the use of low doses of iodinated contrast agents, should be considered in these patients. (orig.)

  14. A Development of Interfacing System between Level 2 and Level 3 PSA for Integrated Analysis of Full Scope PSA

    International Nuclear Information System (INIS)

    Han, Seok Jung

    2011-01-01

    An integrated assessment of full scope and entire level PSA including level 1, 2 and 3 PSA is an essential issue of the current PSA implementation for operating and developing nuclear power plants. In order to perform an integrated assessment under restricted resources for PSA, integrated and automation assessment tools are essentially required. For this purpose, KAERI is in the development of an integrated PSA assessment software package named by OCEANS. As a part of OCEANS, an interfacing system linked between level 2 and level 3 PSA was developed. The purpose of this paper is to introduce an overview of the currently developing interfacing system with a concept of link method. This interfacing system was designed as a subsidiary tool of SARA program which is a supporting utility of level 3 PSA with Microsoft Window based- program

  15. An automated activation analysis system

    International Nuclear Information System (INIS)

    Minor, M.M.; Hensley, W.K.; Denton, M.M.; Garcia, S.R.

    1982-01-01

    An automated delayed neutron counting and instrumental neutron activation analysis system has been developed at Los Alamos National Laboratory's Omega West Reactor (OWR) to analyze samples for uranium and 31 additional elements with a maximum throughput of 400 samples per day. The system and its mode of operation for a large reconnaissance survey will be described. (author)

  16. Automated activation-analysis system

    International Nuclear Information System (INIS)

    Minor, M.M.; Hensley, W.K.; Denton, M.M.; Garcia, S.R.

    1981-01-01

    An automated delayed neutron counting and instrumental neutron activation analysis system has been developed at Los Alamos National Laboratory's Omega West Reactor (OWR) to analyze samples for uranium and 31 additional elements with a maximum throughput of 400 samples per day. The system and its mode of operation for a large reconnaissance survey are described

  17. Computer aided training system development

    International Nuclear Information System (INIS)

    Midkiff, G.N.

    1987-01-01

    The first three phases of Training System Development (TSD) -- job and task analysis, curriculum design, and training material development -- are time consuming and labor intensive. The use of personal computers with a combination of commercial and custom-designed software resulted in a significant reduction in the man-hours required to complete these phases for a Health Physics Technician Training Program at a nuclear power station. This paper reports that each step in the training program project involved the use of personal computers: job survey data were compiled with a statistical package, task analysis was performed with custom software designed to interface with a commercial database management program. Job Performance Measures (tests) were generated by a custom program from data in the task analysis database, and training materials were drafted, edited, and produced using commercial word processing software

  18. Space Launch System Base Heating Test: Sub-Scale Rocket Engine/Motor Design, Development & Performance Analysis

    Science.gov (United States)

    Mehta, Manish; Seaford, Mark; Kovarik, Brian; Dufrene, Aaron; Solly, Nathan

    2014-01-01

    ATA-002 Technical Team has successfully designed, developed, tested and assessed the SLS Pathfinder propulsion systems for the Main Base Heating Test Program. Major Outcomes of the Pathfinder Test Program: Reach 90% of full-scale chamber pressure Achieved all engine/motor design parameter requirements Reach steady plume flow behavior in less than 35 msec Steady chamber pressure for 60 to 100 msec during engine/motor operation Similar model engine/motor performance to full-scale SLS system Mitigated nozzle throat and combustor thermal erosion Test data shows good agreement with numerical prediction codes Next phase of the ATA-002 Test Program Design & development of the SLS OML for the Main Base Heating Test Tweak BSRM design to optimize performance Tweak CS-REM design to increase robustness MSFC Aerosciences and CUBRC have the capability to develop sub-scale propulsion systems to meet desired performance requirements for short-duration testing.

  19. Power Systems Development Facility

    International Nuclear Information System (INIS)

    1993-06-01

    The objective of the PSDF would be to provide a modular facility which would support the development of advanced, pilot-scale, coal-based power systems and hot gas clean-up components. These pilot-scale components would be designed to be large enough so that the results can be related and projected to commercial systems. The facility would use a modular approach to enhance the flexibility and capability for testing; consequently, overall capital and operating costs when compared with stand-alone facilities would be reduced by sharing resources common to different modules. The facility would identify and resolve technical barrier, as well as-provide a structure for long-term testing and performance assessment. It is also intended that the facility would evaluate the operational and performance characteristics of the advanced power systems with both bituminous and subbituminous coals. Five technology-based experimental modules are proposed for the PSDF: (1) an advanced gasifier module, (2) a fuel cell test module, (3) a PFBC module, (4) a combustion gas turbine module, and (5) a module comprised of five hot gas cleanup particulate control devices. The final module, the PCD, would capture coal-derived ash and particles from both the PFBC and advanced gasifier gas streams to provide for overall particulate emission control, as well as to protect the combustion turbine and the fuel cell

  20. Power Systems Development Facility

    Energy Technology Data Exchange (ETDEWEB)

    None

    2003-07-01

    This report discusses Test Campaign TC12 of the Kellogg Brown & Root, Inc. (KBR) Transport Gasifier train with a Siemens Westinghouse Power Corporation (SW) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Gasifier is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using a particulate control device (PCD). While operating as a gasifier, either air or oxygen can be used as the oxidant. Test run TC12 began on May 16, 2003, with the startup of the main air compressor and the lighting of the gasifier start-up burner. The Transport Gasifier operated until May 24, 2003, when a scheduled outage occurred to allow maintenance crews to install the fuel cell test unit and modify the gas clean-up system. On June 18, 2003, the test run resumed when operations relit the start-up burner, and testing continued until the scheduled end of the run on July 14, 2003. TC12 had a total of 733 hours using Powder River Basin (PRB) subbituminous coal. Over the course of the entire test run, gasifier temperatures varied between 1,675 and 1,850 F at pressures from 130 to 210 psig.

  1. Development of a High Resolution, Real Time, Distribution-Level Metering System and Associated Visualization, Modeling, and Data Analysis Functions

    Energy Technology Data Exchange (ETDEWEB)

    Bank, J.; Hambrick, J.

    2013-05-01

    NREL is developing measurement devices and a supporting data collection network specifically targeted at electrical distribution systems to support research in this area. This paper describes the measurement network which is designed to apply real-time and high speed (sub-second) measurement principles to distribution systems that are already common for the transmission level in the form of phasor measurement units and related technologies.

  2. Advanced Dewatering Systems Development

    Energy Technology Data Exchange (ETDEWEB)

    R.H. Yoon; G.H. Luttrell

    2008-07-31

    A new fine coal dewatering technology has been developed and tested in the present work. The work was funded by the Solid Fuels and Feedstocks Grand Challenge PRDA. The objective of this program was to 'develop innovative technical approaches to ensure a continued supply of environmentally sound solid fuels for existing and future combustion systems with minimal incremental fuel cost.' Specifically, this solicitation is aimed at developing technologies that can (i) improve the efficiency or economics of the recovery of carbon when beneficiating fine coal from both current production and existing coal slurry impoundments and (ii) assist in the greater utilization of coal fines by improving the handling characteristics of fine coal via dewatering and/or reconstitution. The results of the test work conducted during Phase I of the current project demonstrated that the new dewatering technologies can substantially reduce the moisture from fine coal, while the test work conducted during Phase II successfully demonstrated the commercial viability of this technology. It is believed that availability of such efficient and affordable dewatering technology is essential to meeting the DOE's objectives.

  3. Modelling a Complex System: Using Novice-Expert Analysis for Developing an Effective Technology-Enhanced Learning Environment

    Science.gov (United States)

    Wu, Hsin-Kai

    2010-01-01

    The purposes of this article are to present the design of a technology-enhanced learning environment (Air Pollution Modeling Environment [APoME]) that was informed by a novice-expert analysis and to discuss high school students' development of modelling practices in the learning environment. APoME was designed to help high school students…

  4. HLW Disposal System Development

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J. W.; Choi, H. J.; Lee, J. Y. (and others)

    2007-06-15

    A KRS is suggested through design requirement analysis of the buffer and the canister which are the constituent of disposal system engineered barrier and HLW management plans are proposed. In the aspect of radionuclide retention capacity, the thickness of the buffer is determined 0.5m, the shape to be disc and ring and the dry density to be 1.6 g/cm{sup 3}. The maximum temperature of the buffer is below 100 .deg. which meets the design requirement. And bentonite blocks with 5 wt% of graphite showed more than 1.0 W/mK of thermal conductivity without the addition of sand. The result of the thermal analysis for proposed double-layered buffer shows that decrease of 7 .deg. C in maximum temperature of the buffer. For the disposal canister, the copper for the outer shell material and cast iron for the inner structure material is recommended considering the results analyzed in terms of performance of the canisters and manufacturability and the geochemical properties of deep groundwater sampled from the research area with granite, salt water intrusion, and the heavy weight of the canister. The results of safety analysis for the canister shows that the criticality for the normal case including uncertainty is the value of 0.816 which meets subcritical condition. Considering nation's 'Basic Plan for Electric Power Demand and Supply' and based on the scenario of disposing CANDU spent fuels in the first phase, the disposal system that the repository will be excavated in eight phases with the construction of the Underground Research Laboratory (URL) beginning in 2020 and commissioning in 2040 until the closure of the repository is proposed. Since there is close correlation between domestic HLW management plans and front-end/back-end fuel cycle plans causing such a great sensitivity of international environment factor, items related to assuring the non-proliferation and observing the international standard are showed to be the influential factor and acceptability

  5. A Systems Analysis and Design Case Study for a Business Modeling Learning Experience for a Capstone CIS/IS Systems Development Class

    Science.gov (United States)

    Russell, Jack; Russell, Barbara

    2015-01-01

    The goal is to provide a robust and challenging problem statement for a capstone, advanced systems analysis and design course for CIS/MIS/CS majors. In addition to the problem narrative, a representative solution for much of the business modeling deliverables is presented using the UML paradigm. A structured analysis deliverable will be the topic…

  6. ECOLOGICAL GEOINFORMATION SYSTEMS AS A TOOL FOR ANALYSIS OF SUSTAINABLE DEVELOPMENT OF THE TERRITORY OF KIZILYURT CITY

    Directory of Open Access Journals (Sweden)

    N. O. Guseynova

    2014-01-01

    Full Text Available Astract. Aim. Research of ecological and geochemical pollution of soils of Kizilyurt city with use of GIS for an assessment of an ecological condition of an urban area as indicator of a sustainable development. Methods. Investigation in field conditions and by methods of chemical analyses of tests of soil samples. Laboratory and analytical researches are executed by using of the standard techniques on the nuclear and absorbing spectrophotometer. Mathematical and statistical methods are applied. Ecological maps and relational Databases are constructed by using of GIS-technologies. Results. The analysis of results of urban soils on the content of heavy metals showed that the greatest contribution to complex pollution of soils of the city is made by lead. The raised content of lead in soils of the city proves the fact of that the soil is the long-term concentrator of pollyutants. Distribution of lead pollution speaks from positions of intensity of an automobile stream. Data on the content of lead in soils of an urban soils indicate essential dispersion of indicators of a mobile form (from 18 mg/kg to 100 mg/kg. Excess is observed not only in comparison with the background contents, also repeatedly (from 3rd to 16 times indicators of maximum permissible concentration of lead are exceeded. Zc values vary from values 7,2 to 12,1 in various points of the city depending on an arrangement in relation to highways or the industrial enterprises. Main conclusions. On a estimating scale of pollution danger of Kizilyurt soil treat category "moderately dangerous" and "dangerous" pollution by heavy metals. The ecological assessment of city soils shows an adverse and dangerous situation for population health. The relational Database of environmental monitoring of natural and technogenic systems on the example of Kizilyurt city is created. According to an ecological and geochemical assessment digital geoinformation cartographical models of a condition of an

  7. Analysis on the Synergy Evolutionary Development of the Collecting, Distributing, and Transporting System of Railway Heavy Haul Transportation

    Directory of Open Access Journals (Sweden)

    Fenling Feng

    2012-01-01

    Full Text Available A synergy evolutionary model of the collecting, distributing, and transporting system of railway heavy haul transportation is built by introducing synergy-related concepts and applying synergy evolutionary theory. Then spline interpolation method, numerical differential five-point formula, and method of least squares are used to solve synergistic coefficient, while fourth-order Rugge-kutta method and fourth-order Adams linear implicit formula method are used to solve coevolutionary curve of the system. Finally, the heavy load transportation of Daqin Railway is an example of the empirical analysis. The research result shows that the degree of order of the system and its three subsystems—collecting, transporting, and distributing—increases as the synergetic coefficient of the subsystems increases; otherwise, the degree of the order will decrease. It also shows that this model can better analyze the coevolutionary process of the heavy load collecting, distributing, and transporting system of Daqin Railway, with its rationality and applicability verified.

  8. Development of steering system in network environment

    International Nuclear Information System (INIS)

    Kanagawa, Fumihiro; Noguchi, So; Yamashita, Hideo

    2002-01-01

    We have been developing the steering system, which can successively observe the-data obtained during the numerical computation and change the parameters in the analysis. Moreover, this system is also extended to link the network. By using this system, a user can easily detect errors immediately and achieve the rapid and accurate analysis with lower computation cost. (Author)

  9. PLACE OF PRODUCTION COSTS SYSTEM ANALYSIS IN SYSTEM ANALYSIS

    Directory of Open Access Journals (Sweden)

    Mariia CHEREDNYCHENKO

    2016-12-01

    Full Text Available Current economic conditions require the development and implementation of an adequate system of production costs, which would ensure a steady profit growth and production volumes in a highly competitive, constantly increasing input prices and tariffs. This management system must be based on an integrated production costs system analysis (PCSA, which would provide all operating costs management subsystems necessary information to design and make better management decisions. It provides a systematic analysis of more opportunities in knowledge, creating conditions of integrity mechanism knowledge object consisting of elements that show intersystem connections, each of which has its own defined and limited objectives, relationship with the environment.

  10. Systems analysis with an integrated medical analysis system (IMAS)

    Science.gov (United States)

    Koelsch, John; Mabry, Susan L.; Rodriquez, Samuel; Takemura, Paul

    1998-05-01

    This paper describes the integrated medical analysis system (IMAS) The evolving system consists of an integrated suite of models and tools providing quantitative and dynamic analysis from multiple physiological function models, clinical care patient input, medical device data, and integrated medical systems. The system is being developed for requirements definition, patient assessment, control theory, training, instrumentation testing and validation. Traditionally, human models and simulations are performed on small scale, isolated problems, usually consisting of detached mathematical models or measurements studies. These systems are not capable of portraying the interactive effects of such systems and certainly are not capable of integrating multiple external entities such as device data, patient data, etc. The human body in and of itself is a complex, integrated system. External monitors, treatments, and medical conditions interact at yet another level. Hence, a highly integrated, interactive simulation system with detailed subsystem models is required for effective quantitative analysis. The current prototype emphasizes cardiovascular, respiratory and thermoregulatory functions with integration of patient device data. Unique system integration of these components is achieved through four facilitators. These facilitators include a distributed interactive computing architecture, application of fluid and structural engineering principles to the models, real-time scientific visualization, and application of strong system integration principles. The IMAS forms a complex analytical tool with emphasis on integration and interaction at multiple levels between components. This unique level of integration and interaction facilitates quantitative analysis for multiple purposes and varying levels of fidelity. An overview of the project and preliminary findings are introduced.

  11. Development of a chromatographic low pressure flow injection system: application to the analysis of methylxanthines in coffee.

    Science.gov (United States)

    Santos, João Rodrigo; Rangel, António O S S

    2012-02-17

    In this work, the coupling of a commercial monolithic column to a traditional low pressure FIA system is proposed for the analysis of theobromine, theophylline and caffeine in coffee brewed samples using UV detection. The parameters mobile phase composition, flow rate and loop volume were evaluated and discussed considering the various chromatographic parameters in order to enable resolution of the methylxanthines studied within the coffee brewed sample matrix. The analyses of methylxanthines in coffee brewed samples by the proposed methodology were in good agreement with those obtained by the reference procedure based on HPLC. Relative errors were below 6% for all samples analyzed. Detection limits in the selected experimental conditions were within 10(-6)M range for theobromine and theophylline, and 10(-5) M for caffeine. The determination rate of the three methylxanthines for coffee brewed samples was ca of 10 h(-1). The main advantage of the proposed flow system was the possibility to perform chromatographic separations in low pressure flow systems. This substantial improvement was achieved due to the compatibility of monolithic columns within the flow injection system surpassing in this way one of the main handicaps of traditional flow analysis systems. Additional features of the strategy presented were low cost, efficiency, high versatility and low reagent consumption comparing to HPLC methodologies usually followed in the case study herein presented. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. POWER SYSTEMS DEVELOPMENT FACILITY

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2002-11-01

    This report discusses test campaign GCT4 of the Kellogg Brown & Root, Inc. (KBR) transport reactor train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The transport reactor is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using one of two possible particulate control devices (PCDs). The transport reactor was operated as a pressurized gasifier during GCT4. GCT4 was planned as a 250-hour test run to continue characterization of the transport reactor using a blend of several Powder River Basin (PRB) coals and Bucyrus limestone from Ohio. The primary test objectives were: Operational Stability--Characterize reactor loop and PCD operations with short-term tests by varying coal-feed rate, air/coal ratio, riser velocity, solids-circulation rate, system pressure, and air distribution. Secondary objectives included the following: Reactor Operations--Study the devolatilization and tar cracking effects from transient conditions during transition from start-up burner to coal. Evaluate the effect of process operations on heat release, heat transfer, and accelerated fuel particle heat-up rates. Study the effect of changes in reactor conditions on transient temperature profiles, pressure balance, and product gas composition. Effects of Reactor Conditions on Synthesis Gas Composition--Evaluate the effect of air distribution, steam/coal ratio, solids-circulation rate, and reactor temperature on CO/CO{sub 2} ratio, synthesis gas Lower Heating Value (LHV), carbon conversion, and cold and hot gas efficiencies. Research Triangle Institute (RTI) Direct Sulfur Recovery Process (DSRP) Testing--Provide syngas in support of the DSRP commissioning. Loop Seal Operations--Optimize loop seal operations and investigate increases to previously achieved maximum solids-circulation rate.

  13. Exploring the effectiveness of obstetrics and gynecology information systems in hospitals of a developing country: A qualitative content analysis

    Directory of Open Access Journals (Sweden)

    Hassan Babamohamadi

    2016-07-01

    Full Text Available Obstetrics and gynecology information systems are designed to replace paper charts, interact with other clinical wards of hospital, and to better care for patients. This qualitative study was performed to explore the perception of midwives about the effectiveness of information systems. In this qualitative study, data were collected through semistructured and in-depth interviews and analyzed by content analysis and constant comparison method. Participants were 15 midwives from obstetrics and gynecology units of affiliated hospitals of Semnan University of Medical Sciences, Iran. Purposeful sampling method was used and continued until data saturation. The several themes that emerged from the interviews were divided into strength and weak points. Strength points included the facilitating the recording of information, reduction of costs and time, and the weakness points were repetition of tasks, low computer literacy of the staff, system restrictions on recording and editing, the unavailability of system and reduced the role of midwives in patient care. Midwives were faced with challenges in the use of information systems indicating the lack of quality of the information system. It seems that reinforcing strength points and resolving hardware and software problems can increase obstetrics and gynecology staff’s acceptance of this information system and reduce their cultural resistance toward it.

  14. PNNL Development and Analysis of Material-Based Hydrogen Storage Systems for the Hydrogen Storage Engineering Center of Excellence

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, Kriston P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Alvine, Kyle J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Kenneth I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Klymyshyn, Nicholas A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pires, Richard P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ronnebro, Ewa [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Simmons, Kevin L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Weimar, Mark R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westman, Matthew P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-29

    The Hydrogen Storage Engineering Center of Excellence is a team of universities, industrial corporations, and federal laboratories with the mandate to develop lower-pressure, materials-based, hydrogen storage systems for hydrogen fuel cell light-duty vehicles. Although not engaged in the development of new hydrogen storage materials themselves, it is an engineering center that addresses engineering challenges associated with the currently available hydrogen storage materials. Three material-based approaches to hydrogen storage are being researched: 1) chemical hydrogen storage materials 2) cryo-adsorbents, and 3) metal hydrides. As a member of this Center, Pacific Northwest National Laboratory (PNNL) has been involved in the design and evaluation of systems developed with each of these three hydrogen storage materials. This report is a compilation of the work performed by PNNL for this Center.

  15. Development of a Performance Analysis Code for the Off-design conditions of a S-CO2 Brayton Cycle Energy Conversion System

    International Nuclear Information System (INIS)

    Yoo, Yong-Hwan; Cha, Jae-Eun; Lee, Tae-Ho; Eoh, Jae-Hyuk; Kim, Seong-O

    2008-01-01

    For the development of a supercritical carbon dioxide (S-CO2) Brayton cycle energy conversion system coupled to KALIMER-600, a thermal balance has been established on 100% power operating conditions including all the reactor system models such as a primary heat transport system (PHTS), an intermediate heat transport system (IHTS), and an energy conversion system. The S-CO2 Brayton cycle energy conversion system consists of a sodium-CO2 heat exchanger (Hx), turbine, high temperature recuperate (HTR), low temperature recuperate (LTR), precooler, compressor no.1, and compressor no.2. Two compressors were employed to avoid a sharp change of the physical properties near their critical point with a corresponding pressure. The component locations and their operating conditions are illustrated. Energy balance of the power conversion system in KALIMER-600 was designed with the full power condition of each component. Therefore, to predict the off-design conditions and to evaluate each component, an off-design performance analysis code should be accomplished. An off-design performance analysis could be classified into overall system control logic and local system control logic. The former means that mass flow rate and power are controlled by valves, and the latter implies that a bypass or inventory control is an admitted system balance. The ultimate goal of this study is development of the overall system control logic

  16. Systems Engineering Analysis

    Directory of Open Access Journals (Sweden)

    Alexei Serna M.

    2013-07-01

    Full Text Available The challenges proposed by the development of the new computer systems demand new guidance related to engineer´s education, because they will solve these problems. In the XXI century, system engineers must be able to integrate a number of topics and knowledge disciplines that complement that traditionally has been known as Computer Systems Engineering. We have enough software development engineers, today we need professional engineers for software integration, leaders and system architects that make the most of the technological development for the benefit of society, leaders that integrate sciences to the solutions they build and propose. In this article the current situation of Computer Systems Engineering is analyzed and is presented a theory proposing the need for modifying the approach Universities have given to these careers, to achieve the education of leader engineers according to the needs of this century.

  17. Large-Scale Battery System Development and User-Specific Driving Behavior Analysis for Emerging Electric-Drive Vehicles

    Directory of Open Access Journals (Sweden)

    Yihe Sun

    2011-04-01

    Full Text Available Emerging green-energy transportation, such as hybrid electric vehicles (HEVs and plug-in HEVs (PHEVs, has a great potential for reduction of fuel consumption and greenhouse emissions. The lithium-ion battery system used in these vehicles, however, is bulky, expensive and unreliable, and has been the primary roadblock for transportation electrification. Meanwhile, few studies have considered user-specific driving behavior and its significant impact on (PHEV fuel efficiency, battery system lifetime, and the environment. This paper presents a detailed investigation of battery system modeling and real-world user-specific driving behavior analysis for emerging electric-drive vehicles. The proposed model is fast to compute and accurate for analyzing battery system run-time and long-term cycle life with a focus on temperature dependent battery system capacity fading and variation. The proposed solution is validated against physical measurement using real-world user driving studies, and has been adopted to facilitate battery system design and optimization. Using the collected real-world hybrid vehicle and run-time driving data, we have also conducted detailed analytical studies of users’ specific driving patterns and their impacts on hybrid vehicle electric energy and fuel efficiency. This work provides a solid foundation for future energy control with emerging electric-drive applications.

  18. Computerized ECT data analysis system

    International Nuclear Information System (INIS)

    Miyake, Y.; Fukui, S.; Iwahashi, Y.; Matsumoto, M.; Koyama, K.

    1988-01-01

    For the analytical method of the eddy current testing (ECT) of steam generator tubes in nuclear power plants, the authors have developed the computerized ECT data analysis system using a large-scale computer with a high-resolution color graphic display. This system can store acquired ECT data up to 15 steam generators, and ECT data can be analyzed immediately on the monitor in dialogue communication with a computer. Analyzed results of ECT data are stored and registered in the data base. This system enables an analyst to perform sorting and collecting of data under various conditions and obtain the results automatically, and also to make a plan of tube repair works. This system has completed the test run, and has been used for data analysis at the annual inspection of domestic plants. This paper describes an outline, features and examples of the computerized eddy current data analysis system for steam generator tubes in PWR nuclear power plants

  19. Development of a Remotely Operated, Field-Deployable Tritium Analysis System for Surface and Ground Water Measurement

    International Nuclear Information System (INIS)

    Hofstetter, K.J.; Cable, P.R.; Noakes, J.E.; Spaulding, J.D.; Neary, M. P.; Wasyl, M.S.

    1996-01-01

    The environmental contamination resulting from decades of testing and manufacturing of nuclear materials for a national defense purposes is a problem now being faced by the United States. The Center for Applied Isotope Studies at the University of Georgia, in cooperation with the Westinghouse Savannah River Company and Packard Instrument Company, have developed a prototype unit for remote, near real time, in situ analysis of tritium in surface and ground water samples

  20. Development and assessment of Multi-dimensional flow models in the thermal-hydraulic system analysis code MARS

    International Nuclear Information System (INIS)

    Chung, B. D.; Bae, S. W.; Jeong, J. J.; Lee, S. M.

    2005-04-01

    A new multi-dimensional component has been developed to allow for more flexible 3D capabilities in the system code, MARS. This component can be applied in the Cartesian and cylindrical coordinates. For the development of this model, the 3D convection and diffusion terms are implemented in the momentum and energy equation. And a simple Prandtl's mixing length model is applied for the turbulent viscosity. The developed multi-dimensional component was assessed against five conceptual problems with analytic solution. And some SETs are calculated and compared with experimental data. With this newly developed multi-dimensional flow module, the MARS code can realistic calculate the flow fields in pools such as those occurring in the core, steam generators and IRWST

  1. RDS - A systematic approach towards system thermal hydraulics input code development for a comprehensive deterministic safety analysis

    International Nuclear Information System (INIS)

    Salim, Mohd Faiz; Roslan, Ridha; Ibrahim, Mohd Rizal Mamat

    2014-01-01

    Deterministic Safety Analysis (DSA) is one of the mandatory requirements conducted for Nuclear Power Plant licensing process, with the aim of ensuring safety compliance with relevant regulatory acceptance criteria. DSA is a technique whereby a set of conservative deterministic rules and requirements are applied for the design and operation of facilities or activities. Computer codes are normally used to assist in performing all required analysis under DSA. To ensure a comprehensive analysis, the conduct of DSA should follow a systematic approach. One of the methodologies proposed is the Standardized and Consolidated Reference Experimental (and Calculated) Database (SCRED) developed by University of Pisa. Based on this methodology, the use of Reference Data Set (RDS) as a pre-requisite reference document for developing input nodalization was proposed. This paper shall describe the application of RDS with the purpose of assessing its effectiveness. Two RDS documents were developed for an Integral Test Facility of LOBI-MOD2 and associated Test A1-83. Data and information from various reports and drawings were referred in preparing the RDS. The results showed that by developing RDS, it has made possible to consolidate all relevant information in one single document. This is beneficial as it enables preservation of information, promotes quality assurance, allows traceability, facilitates continuous improvement, promotes solving of contradictions and finally assisting in developing thermal hydraulic input regardless of whichever code selected. However, some disadvantages were also recognized such as the need for experience in making engineering judgments, language barrier in accessing foreign information and limitation of resources. Some possible improvements are suggested to overcome these challenges

  2. RDS - A systematic approach towards system thermal hydraulics input code development for a comprehensive deterministic safety analysis

    Science.gov (United States)

    Salim, Mohd Faiz; Roslan, Ridha; Ibrahim, Mohd Rizal Mamat @

    2014-02-01

    Deterministic Safety Analysis (DSA) is one of the mandatory requirements conducted for Nuclear Power Plant licensing process, with the aim of ensuring safety compliance with relevant regulatory acceptance criteria. DSA is a technique whereby a set of conservative deterministic rules and requirements are applied for the design and operation of facilities or activities. Computer codes are normally used to assist in performing all required analysis under DSA. To ensure a comprehensive analysis, the conduct of DSA should follow a systematic approach. One of the methodologies proposed is the Standardized and Consolidated Reference Experimental (and Calculated) Database (SCRED) developed by University of Pisa. Based on this methodology, the use of Reference Data Set (RDS) as a pre-requisite reference document for developing input nodalization was proposed. This paper shall describe the application of RDS with the purpose of assessing its effectiveness. Two RDS documents were developed for an Integral Test Facility of LOBI-MOD2 and associated Test A1-83. Data and information from various reports and drawings were referred in preparing the RDS. The results showed that by developing RDS, it has made possible to consolidate all relevant information in one single document. This is beneficial as it enables preservation of information, promotes quality assurance, allows traceability, facilitates continuous improvement, promotes solving of contradictions and finally assisting in developing thermal hydraulic input regardless of whichever code selected. However, some disadvantages were also recognized such as the need for experience in making engineering judgments, language barrier in accessing foreign information and limitation of resources. Some possible improvements are suggested to overcome these challenges.

  3. RDS; A systematic approach towards system thermal hydraulics input code development for a comprehensive deterministic safety analysis

    International Nuclear Information System (INIS)

    Mohd Faiz Salim; Ridha Roslan; Mohd Rizal Mamat

    2013-01-01

    Full-text: Deterministic Safety Analysis (DSA) is one of the mandatory requirements conducted for Nuclear Power Plant licensing process, with the aim of ensuring safety compliance with relevant regulatory acceptance criteria. DSA is a technique whereby a set of conservative deterministic rules and requirements are applied for the design and operation of facilities or activities. Computer codes are normally used to assist in performing all required analysis under DSA. To ensure a comprehensive analysis, the conduct of DSA should follow a systematic approach. One of the methodologies proposed is the Standardized and Consolidated Reference Experimental (and Calculated) Database (SCRED) developed by University of Pisa. Based on this methodology, the use of Reference Data Set (RDS) as a pre-requisite reference document for developing input nodalization was proposed. This paper shall describe the application of RDS with the purpose of assessing its effectiveness. Two RDS documents were developed for an Integral Test Facility of LOBIMOD2 and associated Test A1-83. Data and information from various reports and drawings were referred in preparing the RDS. The results showed that by developing RDS, it has made possible to consolidate all relevant information in one single document. This is beneficial as it enables preservation of information, promotes quality assurance, allows traceability, facilitates continuous improvement, promotes solving of contradictions and finally assisting in developing thermal hydraulic input regardless of whichever code selected. However, some disadvantages were also recognized such as the need for experience in making engineering judgments, language barrier in accessing foreign information and limitation of resources. Some possible improvements are suggested to overcome these challenges. (author)

  4. Ocean Thermal Energy Conversion power system development. Phase I: preliminary design. Final report. [ODSP-3 code; OTEC Steady-State Analysis Program

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-04

    The following appendices are included; Dynamic Simulation Program (ODSP-3); sample results of dynamic simulation; trip report - NH/sub 3/ safety precautions/accident records; trip report - US Coast Guard Headquarters; OTEC power system development, preliminary design test program report; medium turbine generator inspection point program; net energy analysis; bus bar cost of electricity; OTEC technical specifications; and engineer drawings. (WHK)

  5. A Study of Job Demands and Curriculum Development in Agricultural Training Related to the Muskegon County Wastewater Management System. Final Report. Volume II. Task Analysis Results.

    Science.gov (United States)

    Fisher, Harold S.; And Others

    This is the second volume of a four-volume report of a research project designed to (1) identify job needs for agricultural occupations which will result from the Muskegon County Wastewater Management System and perform a task analysis on each occupation, (2) develop instructional modules and determine their place in either high school or 2-year…

  6. The development and error analysis of a kinematic parameters based spatial positioning method for an orthopedic navigation robot system.

    Science.gov (United States)

    Pei, Baoqing; Zhu, Gang; Wang, Yu; Qiao, Huiting; Chen, Xiangqian; Wang, Binbin; Li, Xiaoyun; Zhang, Weijun; Liu, Wenyong; Fan, Yubo

    2017-09-01

    Spatial positioning is the key function of a surgical navigation robot system, and accuracy is the most important performance index of such a system. The kinematic parameters of a six degrees of freedom (DOF) robot arm were used to form the transformation from intraoperative fluoroscopy images to a robot's coordinate system without C-arm calibration and to solve the redundant DOF problem. The influences of three typical error sources and their combination on the final navigation error were investigated through Monte Carlo simulation. The navigation error of the proposed method is less than 0.6 mm, and the feasibility was verified through cadaver experiments. Error analysis suggests that the robot kinematic error has a linear relationship with final navigation error, while the image error and gauge error have nonlinear influences. This kinematic parameters based method can provide accurate and convenient navigation for orthopedic surgeries. The result of error analysis will help error design and assignment for surgical robots. Copyright © 2016 John Wiley & Sons, Ltd.

  7. A dual fired downdraft gasifier system to produce cleaner gas for power generation: Design, development and performance analysis

    International Nuclear Information System (INIS)

    Raman, P.; Ram, N.K.; Gupta, Ruchi

    2013-01-01

    The existing biomass gasifier systems have several technical challenges, which need to be addressed. They are reduction of impurities in the gas, increasing the reliability of the system, easy in operation and maintenance. It is also essential to have a simple design of gasifier system for power generation, which can work even in remote locations. A dual fired downdraft gasifier system was designed to produce clean gas from biomass fuel, used for electricity generation. This system is proposed to overcome a number of technical challenges. The system is equipped with dry gas cleaning and indirect gas cooling equipment. The dry gas cleaning system completely eliminates wet scrubbers that require large quantities of water. It also helps to do away with the disposal issues with the polluted water. With the improved gasifier system, the tar level in the raw gas is less than 100 mg Nm −3 .Cold gas efficiency has improved to 89% by complete gasification of biomass and recycling of waste heat into the reactor. Several parameters, which are considered in the design and development of the reactors, are presented in detail with their performance indicators. - Highlights: • Hot air injection in dual fired reactor reduces the tar content to less than 100 mg Nm −3 . • In clean gas the tar content is 35 mg Nm −3 and the dust content is nil. • The specific gasification rate is 2.8 Nm 3 kg −1 of fuel wood and cold gas efficiency is 89.7%. • CV of the gas: 5.3 MJ Nm −3 , SFC: 1.1 kg kWh −1 and wood to power efficiency: 21%. • Cold gas efficiency is improved by optimizing the reactor's design and recycling the waste heat from hot gas

  8. Software design specification and analysis technique (SDSAT) for the development of safety-critical systems based on a programmable logic controller (PLC)

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Seo Ryong [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)]. E-mail: srkoo@kaist.ac.kr; Seong, Poong Hyun [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)]. E-mail: phseong@kaist.ac.kr

    2006-06-15

    This paper introduces a Software Design Specification and Analysis Technique (SDSAT) for safety-critical systems based on a Programmable Logic Controller (PLC). During software development phases, the design phase performs an important role in connecting the requirements phase and the implementation phase, and it is a process of translating software requirements into software structures. In this work, the Nuclear FBD-style Design Specification and analysis (NuFDS) approach was proposed for nuclear Instrumentation and Control (I and C) software. The NuFDS approach is suggested in a straightforward manner for effective and formal software design specification and analysis. Accordingly, the proposed NuFDS approach is composed of a software design specification technique and a software design analysis technique. In addition, for tool support in the design phase, we developed the NuSDS tool based on the NuFDS approach; this tool is used specifically for generating software design specification and analysis for nuclear fields.

  9. Development of a Reference Image Collection Library for Histopathology Image Processing, Analysis and Decision Support Systems Research.

    Science.gov (United States)

    Kostopoulos, Spiros; Ravazoula, Panagiota; Asvestas, Pantelis; Kalatzis, Ioannis; Xenogiannopoulos, George; Cavouras, Dionisis; Glotsos, Dimitris

    2017-06-01

    Histopathology image processing, analysis and computer-aided diagnosis have been shown as effective assisting tools towards reliable and intra-/inter-observer invariant decisions in traditional pathology. Especially for cancer patients, decisions need to be as accurate as possible in order to increase the probability of optimal treatment planning. In this study, we propose a new image collection library (HICL-Histology Image Collection Library) comprising 3831 histological images of three different diseases, for fostering research in histopathology image processing, analysis and computer-aided diagnosis. Raw data comprised 93, 116 and 55 cases of brain, breast and laryngeal cancer respectively collected from the archives of the University Hospital of Patras, Greece. The 3831 images were generated from the most representative regions of the pathology, specified by an experienced histopathologist. The HICL Image Collection is free for access under an academic license at http://medisp.bme.teiath.gr/hicl/ . Potential exploitations of the proposed library may span over a board spectrum, such as in image processing to improve visualization, in segmentation for nuclei detection, in decision support systems for second opinion consultations, in statistical analysis for investigation of potential correlations between clinical annotations and imaging findings and, generally, in fostering research on histopathology image processing and analysis. To the best of our knowledge, the HICL constitutes the first attempt towards creation of a reference image collection library in the field of traditional histopathology, publicly and freely available to the scientific community.

  10. Development and implementation of a low cost micro computer system for LANDSAT analysis and geographic data base applications

    Science.gov (United States)

    Faust, N.; Jordon, L.

    1981-01-01

    Since the implementation of the GRID and IMGRID computer programs for multivariate spatial analysis in the early 1970's, geographic data analysis subsequently moved from large computers to minicomputers and now to microcomputers with radical reduction in the costs associated with planning analyses. Programs designed to process LANDSAT data to be used as one element in a geographic data base were used once NIMGRID (new IMGRID), a raster oriented geographic information system, was implemented on the microcomputer. Programs for training field selection, supervised and unsupervised classification, and image enhancement were added. Enhancements to the color graphics capabilities of the microsystem allow display of three channels of LANDSAT data in color infrared format. The basic microcomputer hardware needed to perform NIMGRID and most LANDSAT analyses is listed as well as the software available for LANDSAT processing.

  11. [Analysis of heavy-metal-mediated disease and development of a novel remediation system based on fieldwork and experimental research].

    Science.gov (United States)

    Yajima, Ichiro; Zou, Cunchao; Li, Xiang; Nakano, Chizuru; Omata, Yasuhiro; Kumasaka, Mayuko Y

    2015-01-01

    Heavy-metal pollution occurs in various environments, including water, air and soil, and has serious effects on human health. Since heavy-metal pollution in drinking water causes various diseases including skin cancer, it has become a global problem worldwide. However, there is limited information on the mechanism of development of heavy-metal-mediated disease. We performed both fieldwork and experimental studies to elucidate the levels of heavy-metal pollution and mechanisms of development of heavy-metal-related disease and to develop a novel remediation system. Our fieldwork in Bangladesh, Vietnam and Malaysia demonstrated that drinking well water in these countries was polluted with high concentrations of several heavy metals including arsenic, barium, iron and manganese. Our experimental studies based on the data from our fieldwork demonstrated that these heavy metals caused skin cancer and hearing loss. Further experimental studies resulted in the development of a novel remediation system with which toxic heavy metals were absorbed from polluted drinking water. Implementation of both fieldwork and experimental studies is important for prediction, prevention and therapy of heavy-metal-mediated diseases.

  12. Socio-technical systems analysis of waste to energy from municipal solid waste in developing economies: a case for Nigeria

    Directory of Open Access Journals (Sweden)

    Iyamu Hope O.

    2017-01-01

    Full Text Available Waste generation is an inevitable by-product of human activity, and it is on the rise due to rapid urbanisation, industrialisation, increased wealth and population. The composition of municipal solid waste (MSW in developed and developing economies differ, especially with the organic fraction. Research shows that the food waste stream of MSW in developing countries is over 50%. The case study for this investigation, Nigeria, has minimal formal recycling or resource recovery programs. The average composition of waste from previous research in the country is between 50–70% putrescible and 30–50% non-putrescible, presenting significant resource recovery potential in composting and biogas production. Waste-to-energy (WtE is an important waste management solution that has been successfully implemented and operated in most developed economies. This contribution reports the conditions that would be of interest before WtE potentials of MSW is harnessed, in an efficient waste management process in a developing economy like Nigeria. The investigation presents a set of socio-technical parameters and transition strategy model that would inform a productive MSW management and resource recovery, in which WtE can be part of the solution. This model will find application in the understanding of the interactions between the socio-economic, technical and environmental system, to promote sustainable resource recovery programs in developing economies, among which is WtE.

  13. POWER SYSTEMS DEVELOPMENT FACILITY

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2002-05-01

    This report discusses test campaign GCT3 of the Halliburton KBR transport reactor train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The transport reactor is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using one of two possible particulate control devices (PCDs). The transport reactor was operated as a pressurized gasifier during GCT3. GCT3 was planned as a 250-hour test run to commission the loop seal and continue the characterization of the limits of operational parameter variations using a blend of several Powder River Basin coals and Bucyrus limestone from Ohio. The primary test objectives were: (1) Loop Seal Commissioning--Evaluate the operational stability of the loop seal with sand and limestone as a bed material at different solids circulation rates and establish a maximum solids circulation rate through the loop seal with the inert bed. (2) Loop Seal Operations--Evaluate the loop seal operational stability during coal feed operations and establish maximum solids circulation rate. Secondary objectives included the continuation of reactor characterization, including: (1) Operational Stability--Characterize the reactor loop and PCD operations with short-term tests by varying coal feed, air/coal ratio, riser velocity, solids circulation rate, system pressure, and air distribution. (2) Reactor Operations--Study the devolatilization and tar cracking effects from transient conditions during transition from start-up burner to coal. Evaluate the effect of process operations on heat release, heat transfer, and accelerated fuel particle heat-up rates. Study the effect of changes in reactor conditions on transient temperature profiles, pressure balance, and product gas composition. (3) Effects of Reactor Conditions on Syngas Composition--Evaluate the effect of air distribution, steam

  14. Distribution system modeling and analysis

    CERN Document Server

    Kersting, William H

    2001-01-01

    For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real understanding of the operating characteristics of a distribution system, engineers using the programs can easily make serious errors in their designs and operating procedures. Distribution System Modeling and Analysis helps prevent those errors. It gives readers a basic understanding of the modeling and operating characteristics of the major components of a distribution system. One by one, the author develops and analyzes each component as a stand-alone element, then puts them all together to analyze a distribution system comprising the various shunt and series devices for power-flow and short-circuit studies. He includes the derivation of all models and includes many num...

  15. Analysis of normative requirements for the development and implementation of a quality management system in Brazilian nuclear installations and activities

    International Nuclear Information System (INIS)

    Kibrit, Eduardo

    2008-01-01

    The present work identifies, characterizes and analyses the normative requirements for the development and implementation of quality management systems in Brazilian nuclear installations and activities. The requirements established in standards IAEA GS-R-3, IAEA GS-G-3.1, IAEA DS 349, NBR ISO 9001:2000 e CNEN-NN-1.16 are critically analyzed. A correlation matrix of the applicable standards is presented and the related topics among them are identified. The standards IAEA GS-R-3, IAEA GS-G-3.1 and IAEA DS 349 define general requirements for establishing, implementing, assessing and continually improving an integrated management system in nuclear installations and activities, in IAEA member countries. The standard NBR ISO 9001:2000 establishes general requirements for the implementation of a quality management system in all kinds of organizations. The standard CNEN NN-1.16 establishes the regulating requirements for the quality assurance systems and programs of nuclear installations, for licensing and authorization for operation of these installations in Brazil. The standard IAEA GS-R-3 that replaces the code IAEA 50-C-Q introduces the concept of 'Integrated Management System' for the nuclear area, in preference to the concepts of 'Quality Assurance' and 'Quality Management'. This new approach is aligned with the current tendency incorporating requirements of quality, safety, health, environment, security, economics and other in a unique management system. Examples of quality management systems implemented by Brazilian nuclear organizations and by nuclear organizations outside Brazil are analyzed and considered in the discussion of results. (author)

  16. Automated activation-analysis system

    International Nuclear Information System (INIS)

    Minor, M.M.; Garcia, S.R.; Denton, M.M.

    1982-01-01

    An automated delayed neutron counting and instrumental neutron activation analysis system has been developed at Los Alamos National Laboratory's Omega West Reactor (OWR) to analyze samples for uranium and 31 additional elements with a maximum throughput of 400 samples per day

  17. Digital Systems Analysis

    Science.gov (United States)

    Martin, Vance S.

    2009-01-01

    There have been many attempts to understand how the Internet affects our modern world. There have also been numerous attempts to understand specific areas of the Internet. This article applies Immanuel Wallerstein's World Systems Analysis to our informationalist society. Understanding this world as divided among individual core, semi-periphery,…

  18. Requirements analysis and system design

    CERN Document Server

    Maciaszek, Leszek A

    2007-01-01

    An examination of the methods and techniques used in the analysis and design phases of Information System development. Emphasis is placed upon the application of object technology in enterprise information systems (EIS) with UML being used throughout. Through its excellent balance of practical explanation and theoretical insight the book manages to avoid unnecessary, complicating details without sacrificing rigor. Examples of real-world scenarios are used throughout, giving the reader an understanding of what really goes on within the field of Software Engineering.

  19. Feasibility analysis of nuclear–coal hybrid energy systems from the perspective of low-carbon development

    International Nuclear Information System (INIS)

    Chen, QianQian; Tang, ZhiYong; Lei, Yang; Sun, YuHan; Jiang, MianHeng

    2015-01-01

    Highlights: • We report a nuclear–coal hybrid energy systems. • We address the high-carbon energy resource integrating with a low-carbon energy resource. • We establish a systematic techno-economic model. • Improving both energy and carbon efficiency. • A significantly lower CO 2 emission intensity is achieved by the system. - Abstract: Global energy consumption is expected to increase significantly due to the growth of the economy and population. The utilization of fossil resource, especially coal, will likely be constrained by carbon dioxide emissions, known to be the principal contributor to climate change. Therefore, the world is facing the challenge of how to utilize fossil resource without a large carbon footprint. In the present work, a nuclear–coal hybrid energy system is proposed as a potential solution to the aforementioned challenge. A high-carbon energy such as coal is integrated effectively with a low-carbon energy such as nuclear in a flexible and optimized manner, which is able to generate the chemicals and fuels with low carbon dioxide emissions. The nuclear–coal hybrid energy system is presented in this paper for the detailed analysis. In this case, the carbon resource required by the fuel syntheses and chemical production processes is mainly provided by coal while the hydrogen resource is derived from nuclear energy. Such integration can not only lead to a good balance between carbon and hydrogen, but also improve both energy and carbon efficiencies. More importantly, a significantly lower CO 2 emission intensity is achieved. A systematic techno-economic model is established, and a scenario analysis is carried out on the hybrid system to assess the economic competitiveness based on the considerations of various types of externalities. It is found that with the rising carbon tax and coal price as well as the decreasing cost of nuclear energy, the hybrid energy system will become more and more economically competitive with the

  20. Analysis and Modeling of the Galvanic Skin Response Spontaneous Component in the context of Intelligent Biofeedback Systems Development

    Science.gov (United States)

    Unakafov, A.

    2009-01-01

    The paper presents an approach to galvanic skin response (GSR) spontaneous component analysis and modeling. In the study a classification of biofeedback training methods is given, importance of intelligent methods development is shown. The INTENS method, which is perspective for intellectualization, is presented. An important problem of biofeedback training method intellectualization - estimation of the GSR spontaneous component - is solved in the main part of the work. Its main characteristics are described; results of GSR spontaneous component modeling are shown. Results of small research of an optimum material for GSR probes are presented.

  1. Industrialized Information Systems Development

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    The production of application software is rapidly being industrialized. Computer manufacturers and software houses produce a rapidly growing number of generic software applications and systems, and more and more user companies choose to build their computer-based information systems with such gen......The production of application software is rapidly being industrialized. Computer manufacturers and software houses produce a rapidly growing number of generic software applications and systems, and more and more user companies choose to build their computer-based information systems...

  2. Development of testing system for the thermo-mechanical fatigue crack analysis of nuclear power plant pipes

    International Nuclear Information System (INIS)

    Lee, Ho Jin; Kim, Maan Won; Lee, Bong Sang

    2003-12-01

    Fatigue crack growth analysis plays an important role in the structural integrity assessment or the service life calculation of the nuclear power plant pipes. To obtain the material properties as a basic data to achieve an accurate crack growth analysis, a lot of tests and numerical crack growth simulations have been done for decades. The BS 7910 or the ASME Boiler and Pressure Vessel Code Section XI, generally used to evaluate crack growth behavior, were made under the based on simple stress states or at the evaluated isothermal temperature. It is well known that the ASME code could sometimes give so conservative results in some cases of which the cracked components are experiencing with cyclic thermal shock. In this report, we suggested a method for the life assessment of a crack embedded in nuclear power plant pipes under the thermal-mechanical fatigue loads. We here use the numerical method to get the temperature history for thermal- mechanical fatigue crack growth test. And then we can calculate the remaining life time of the pipe by using the fracture mechanics and the test results together. For this purpose, we constructed a thermal-mechanical fatigue crack growth testing system. We also gave a lot of review about recent researches in the experimental field of thermal-mechanical fatigue analysis

  3. Development of a test system for the analysis of the read-out electronic cabling for the CMS drift tube chambers

    International Nuclear Information System (INIS)

    Fernandez Bedoya, C.; Montero, M.; Willmott, C.

    2004-01-01

    A test system has been developed for the analysis of the read-out electronics cabling for the CMS drift tube chambers. The read-out electronics will be placed inside some aluminium boxes, so-called Minicrates, which are going to be produced soon at CIEMAT. Due to the difficulty of detecting and repairing errors in the cables once they have been installed and recalling also to the large number of Minicrates that are going to be produced, it was decided to design and develop a test system for testing the cabling before its installation. (Author)

  4. Rapid orthophoto development system.

    Science.gov (United States)

    2013-06-01

    The DMC system procured in the project represented state-of-the-art, large-format digital aerial camera systems at the start of : project. DMC is based on the frame camera model, and to achieve large ground coverage with high spatial resolution, the ...

  5. Development of a computer system for the thermodynamic analysis; Desarrollo de un sistema de computo para el analisis termodinamico

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez R, Aurelio; Romero S, Antonio; Gomez G, Herminia [Instituto Politecnico Nacional, Mexico, D.F. (Mexico)

    1996-02-01

    The objective of this paper is to explain the programs that are contained in a Thermodynamic Computer System. Students can use this Computer System to make complicated calculations that are required in Thermodynamic Analysis. One of this programs is used to obtain the expression of heat capacity of pure substances in terms of temperature, at constant pressure. A database of pure substances has been created which retrieves the thermodynamic properties (enthalpy, entropy and Gibbs free energy) in such a format that it is very easy to understand. The changes of state functions for chemical reactions can also be calculated. Another program is used to estimate the equilibrium conditions in multicomponent and multiphase systems. [Spanish] En el presente trabajo se muestran los programas de computo que conforman un Sistema de Analisis Termodinamico desarrollado con el fin de facilitar los calculos y la comprension de algunos principios de la Termodinamica. Este sistema permite obtener la funcionalidad de la capacidad calorifica con la temperatura de sustancias puras, a presion constante; obtener de manera rapida y concisa las propiedades termodinamicas (entalpia, entropia y energia libre de Gibbs) de elementos y compuestos puros almacenados en una base de datos; determinar los cambios en las funciones de estado de reacciones quimicas entre sustancias puras; determinar el equilibrio en sistemas multicomponentes y multifasicos. Se indican los alcances de este grupo de programas de computo asi como su aplicacion a procesos practicos.

  6. Development of safety analysis technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Do Hee; Kwon, Y. M.; Kim, K. D. [and others

    2000-05-01

    The analysis methodologies as well as the analysis computer code system for the transient, HCDA, and containment performance analyses, which are required for KALIMER safety analyses, have been developed. The SSC-K code has been developed based on SSC-L which is an analysis code for loop type LMR, by improving models necessary for the KALIMER system analysis, and additional models have been added to the code. In addition, HCDA analysis model has been developed and the containment performance analysis code has been also improved. The preliminary basis for the safety analysis has been established, and the preliminary safety analyses for the key design features have been performed. In addition, a state-of-art analysis for LMR PSA and overseas safety and licensing requirements have been reviewed. The design database for the systematic management of the design documents as well as design processes has been established as well.

  7. Actinide isotopic analysis systems

    International Nuclear Information System (INIS)

    Koenig, Z.M.; Ruhter, W.D.; Gunnink, R.

    1990-01-01

    This manual provides instructions and procedures for using the Lawrence Livermore National Laboratory's two-detector actinide isotope analysis system to measure plutonium samples with other possible actinides (including uranium, americium, and neptunium) by gamma-ray spectrometry. The computer program that controls the system and analyzes the gamma-ray spectral data is driven by a menu of one-, two-, or three-letter options chosen by the operator. Provided in this manual are descriptions of these options and their functions, plus detailed instructions (operator dialog) for choosing among the options. Also provided are general instructions for calibrating the actinide isotropic analysis system and for monitoring its performance. The inventory measurement of a sample's total plutonium and other actinides content is determined by two nondestructive measurements. One is a calorimetry measurement of the sample's heat or power output, and the other is a gamma-ray spectrometry measurement of its relative isotopic abundances. The isotopic measurements needed to interpret the observed calorimetric power measurement are the relative abundances of various plutonium and uranium isotopes and americium-241. The actinide analysis system carries out these measurements. 8 figs

  8. Network systems security analysis

    Science.gov (United States)

    Yilmaz, Ä.°smail

    2015-05-01

    Network Systems Security Analysis has utmost importance in today's world. Many companies, like banks which give priority to data management, test their own data security systems with "Penetration Tests" by time to time. In this context, companies must also test their own network/server systems and take precautions, as the data security draws attention. Based on this idea, the study cyber-attacks are researched throughoutly and Penetration Test technics are examined. With these information on, classification is made for the cyber-attacks and later network systems' security is tested systematically. After the testing period, all data is reported and filed for future reference. Consequently, it is found out that human beings are the weakest circle of the chain and simple mistakes may unintentionally cause huge problems. Thus, it is clear that some precautions must be taken to avoid such threats like updating the security software.

  9. Expert Systems Development Methodology

    Science.gov (United States)

    1989-07-28

    was able to prove such a machine could exist. 3 Lady Ada Lovelace was a contemporary of George Babbage. She studied with Babbage and wrote a popular...essay explaining the analytical engine. She is sometimes credited with inventing computer languages. The Ada computer language is named in her honor. -8...documentation and logic flow charting of the whole system. If your expert system is written in a highly structured language such as Ada , logic flow

  10. A prototype expert system to support the development of a fault-tree analysis software for nuclear reactor safety

    International Nuclear Information System (INIS)

    Mesko, L.

    1990-01-01

    The project called EMERIS is designed to provide a material testing nuclear reactor and experimental loops with a software for the 'acquisition, evaluation and archivation of measured data during the operation of the experimental facility'. The project which gives job a team has a duration of two years and involves three Vax compatible TPA-type computers and many smaller computers for data digitalization and graphical workstations. The detailed description of the project is not the task of the paper. One of its modules, however, plays an important role in the considerations. Namely the module for distrubance analysis (DA) which is planned to perform a rule based on-line evaluation of numerous predefined fault trees in an expert system like environment

  11. Development of a chromatographic low pressure flow injection system using amperometric detection: Application to the analysis of niacin in coffee.

    Science.gov (United States)

    Santos, João Rodrigo; Rangel, António O S S

    2015-11-15

    In this work, an analytical flow system able to perform low pressure chromatography with amperometric detection is presented. As case study, the determination of niacin (vitamin B3) in coffee brewed samples was selected. The manifold comprised a 1.0 cm length monolithic column coated with didecyldimethylammonium bromide, a laboratory-made boron doped diamond electrode, and featured in-line ionic strength adjustment of the mobile phase. The figures of merit concerning the selected case study namely, detection limit, 7.90 × 10(-7) M, determination rate, ca. 10 samplesh(-1), mobile phase and ISA solution consumption, ca. 2.6 mL per analysis, and CV, below 5% for retention time and peak height, showed the competitiveness of this analytical strategy comparing to the described HPLC methods for niacin determination. The strategy displays a simple configuration, low cost, fast and easy assembling, foreseeing its use to general purpose applications. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Development of the 16 X-STR loci typing system and genetic analysis in a Shanghai Han population from China.

    Science.gov (United States)

    Sun, Kuan; Zhao, Shumin; Tian, Huaizhou; Zhang, Suhua; Li, Chengtao

    2013-11-01

    This study developed a new multiplex PCR system that simultaneously amplifies 16 X-STR loci in the same PCR reaction, and the polymorphism and mutation rates of these 16 X-STR loci were explored in a Shanghai Han population from China. These loci included DXS10134, DXS10159, DXS6789, DXS6795, DXS6800, DXS6803, DXS6807, DXS6810, DXS7132, DXS7424, DXS8378, DXS9902, GATA165B12, GATA172D05, GATA31E08, and HPRTB. Samples from 591 unrelated individuals (293 males and 298 females) and 400 two-generation families were successfully analyzed using this multiplex system. Allele frequencies and mutation rates of the 16 loci were investigated, with the comparison of allele frequency distributions among different populations performed. Polymorphism information contents of these loci were all >0.6440 except the locus DXS6800 (0.4706). Nine cases of mutations were detected in the 16 loci from the investigation of 9232 meioses. Pairwise comparisons of allele frequency distributions showed significant differences for most loci among populations from different countries and ethnic groups but not among the Han population living in other areas of China. These results suggest that the 16 X-STR loci system provides highly informative polymorphic data for paternity testing and forensic identification in the Han population in Shanghai, China, as a complementary tool. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Methodology of Credit Analysis Development

    Directory of Open Access Journals (Sweden)

    Slađana Neogradi

    2017-12-01

    Full Text Available The subject of research presented in this paper refers to the definition of methodology for the development of credit analysis in companies and its application in lending operations in the Republic of Serbia. With the developing credit market, there is a growing need for a well-developed risk and loss prevention system. In the introduction the process of bank analysis of the loan applicant is presented in order to minimize and manage the credit risk. By examining the subject matter, the process of processing the credit application is described, the procedure of analyzing the financial statements in order to get an insight into the borrower's creditworthiness. In the second part of the paper, the theoretical and methodological framework is presented applied in the concrete company. In the third part, models are presented which banks should use to protect against exposure to risks, i.e. their goal is to reduce losses on loan operations in our country, as well as to adjust to market conditions in an optimal way.

  14. Integrated system reliability analysis

    DEFF Research Database (Denmark)

    Gintautas, Tomas; Sørensen, John Dalsgaard

    Specific targets: 1) The report shall describe the state of the art of reliability and risk-based assessment of wind turbine components. 2) Development of methodology for reliability and risk-based assessment of the wind turbine at system level. 3) Describe quantitative and qualitative measures...... (indicators) that can be used to assess the reliability of innovations and new technologies....

  15. Development and Application of a New Grey Dynamic Hierarchy Analysis System (GDHAS) for Evaluating Urban Ecological Security

    Science.gov (United States)

    Shao, Chaofeng; Tian, Xiaogang; Guan, Yang; Ju, Meiting; Xie, Qiang

    2013-01-01

    Selecting indicators based on the characteristics and development trends of a given study area is essential for building a framework for assessing urban ecological security. However, few studies have focused on how to select the representative indicators systematically, and quantitative research is lacking. We developed an innovative quantitative modeling approach called the grey dynamic hierarchy analytic system (GDHAS) for both the procedures of indicator selection and quantitative assessment of urban ecological security. Next, a systematic methodology based on the GDHAS is developed to assess urban ecological security comprehensively and dynamically. This assessment includes indicator selection, driving force-pressure-state-impact-response (DPSIR) framework building, and quantitative evaluation. We applied this systematic methodology to assess the urban ecological security of Tianjin, which is a typical coastal super megalopolis and the industry base in China. This case study highlights the key features of our approach. First, 39 representative indicators are selected for the evaluation index system from 62 alternative ones available through the GDHAS. Second, the DPSIR framework is established based on the indicators selected, and the quantitative assessment of the eco-security of Tianjin is conducted. The results illustrate the following: urban ecological security of Tianjin in 2008 was in alert level but not very stable; the driving force and pressure subsystems were in good condition, but the eco-security levels of the remainder of the subsystems were relatively low; the pressure subsystem was the key to urban ecological security; and 10 indicators are defined as the key indicators for five subsystems. These results can be used as the basis for urban eco-environmental management. PMID:23698700

  16. Development and Application of a New Grey Dynamic Hierarchy Analysis System (GDHAS for Evaluating Urban Ecological Security

    Directory of Open Access Journals (Sweden)

    Qiang Xie

    2013-05-01

    Full Text Available Selecting indicators based on the characteristics and development trends of a given study area is essential for building a framework for assessing urban ecological security. However, few studies have focused on how to select the representative indicators systematically, and quantitative research is lacking. We developed an innovative quantitative modeling approach called the grey dynamic hierarchy analytic system (GDHAS for both the procedures of indicator selection and quantitative assessment of urban ecological security. Next, a systematic methodology based on the GDHAS is developed to assess urban ecological security comprehensively and dynamically. This assessment includes indicator selection, driving force-pressure-state-impact-response (DPSIR framework building, and quantitative evaluation. We applied this systematic methodology to assess the urban ecological security of Tianjin, which is a typical coastal super megalopolis and the industry base in China. This case study highlights the key features of our approach. First, 39 representative indicators are selected for the evaluation index system from 62 alternative ones available through the GDHAS. Second, the DPSIR framework is established based on the indicators selected, and the quantitative assessment of the eco-security of Tianjin is conducted. The results illustrate the following: urban ecological security of Tianjin in 2008 was in alert level but not very stable; the driving force and pressure subsystems were in good condition, but the eco-security levels of the remainder of the subsystems were relatively low; the pressure subsystem was the key to urban ecological security; and 10 indicators are defined as the key indicators for five subsystems. These results can be used as the basis for urban eco-environmental management.

  17. Toward a Cooperative Experimental System Development Approach

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Kyng, Morten; Mogensen, Preben Holst

    1997-01-01

    , however, not limited to this development context, it may be applied for in-house or contract development as well. In system development, particularly in cooperative and experimental system development, we argue that it is necessary to analytically separate the abstract concerns, e.g. analysis, design......This chapter represents a step towards the establishment of a new system development approach, called Cooperative Experimental System Development (CESD). CESD seeks to overcome a number of limitations in existing approaches: specification oriented methods usually assume that system design can...... be based solely on observation and detached reflection; prototyping methods often have a narrow focus on the technical construction of various kinds of prototypes; Participatory Design techniques—including the Scandinavian Cooperative Design (CD) approaches—seldom go beyond the early analysis...

  18. Systems Analysis and Education Research Literature Review.

    Science.gov (United States)

    Geisinger, Robert W.

    Systems approaches, developed in World War II for military and business operations, have been applied increasingly to educational affairs. Educational systems analysis has received widespread usage in finance and accounting, and has also been successfully applied to information systems, instructional systems development, school design and…

  19. Results of analysis of archive MSG data in the context of MCS prediction system development for economic decisions assistance - case studies

    Science.gov (United States)

    Szafranek, K.; Jakubiak, B.; Lech, R.; Tomczuk, M.

    2012-04-01

    PROZA (Operational decision-making based on atmospheric conditions) is the project co-financed by the European Union through the European Regional Development Fund. One of its tasks is to develop the operational forecast system, which is supposed to support different economies branches like forestry or fruit farming by reducing the risk of economic decisions with taking into consideration weather conditions. In the frame of this studies system of sudden convective phenomena (storms or tornados) prediction is going to be built. The main authors' purpose is to predict MCSs (Mezoscale Convective Systems) basing on MSG (Meteosat Second Generation) real-time data. Until now several tests were performed. The Meteosat satellite images in selected spectral channels collected for Central Europe Region for May and August 2010 were used to detect and track cloud systems related to MCSs. In proposed tracking method first the cloud objects are defined using the temperature threshold and next the selected cells are tracked using principle of overlapping position on consecutive images. The main benefit to use a temperature thresholding to define cells is its simplicity. During the tracking process the algorithm links the cells of the image at time t to the one of the following image at time t+dt that correspond to the same cloud system (Morel-Senesi algorithm). An automated detection and elimination of some instabilities presented in tracking algorithm was developed. The poster presents analysis of exemplary MCSs in the context of near real-time prediction system development.

  20. Development of the Ensemble Navy Aerosol Analysis Prediction System (ENAAPS) and its application of the Data Assimilation Research Testbed (DART) in support of aerosol forecasting

    Science.gov (United States)

    Rubin, J. I.; Reid, J. S.; Hansen, J. A.; Anderson, J. L.; Collins, N.; Hoar, T. J.; Hogan, T.; Lynch, P.; McLay, J.; Reynolds, C. A.; Sessions, W. R.; Westphal, D. L.; Zhang, J.

    2015-10-01

    An ensemble-based forecast and data assimilation system has been developed for use in Navy aerosol forecasting. The system makes use of an ensemble of the Navy Aerosol Analysis Prediction System (ENAAPS) at 1° × 1°, combined with an Ensemble Adjustment Kalman Filter from NCAR's Data Assimilation Research Testbed (DART). The base ENAAPS-DART system discussed in this work utilizes the Navy Operational Global Analysis Prediction System (NOGAPS) meteorological ensemble to drive offline NAAPS simulations coupled with the DART Ensemble Kalman Filter architecture to assimilate bias-corrected MODIS Aerosol Optical Thickness (AOT) retrievals. This work outlines the optimization of the 20-member ensemble system, including consideration of meteorology and source-perturbed ensemble members as well as covariance inflation. Additional tests with 80 meteorological and source members were also performed. An important finding of this work is that an adaptive covariance inflation method, which has not been previously tested for aerosol applications, was found to perform better than a temporally and spatially constant covariance inflation. Problems were identified with the constant inflation in regions with limited observational coverage. The second major finding of this work is that combined meteorology and aerosol source ensembles are superior to either in isolation and that both are necessary to produce a robust system with sufficient spread in the ensemble members as well as realistic correlation fields for spreading observational information. The inclusion of aerosol source ensembles improves correlation fields for large aerosol source regions such as smoke and dust in Africa, by statistically separating freshly emitted from transported aerosol species. However, the source ensembles have limited efficacy during long range transport. Conversely, the meteorological ensemble produces sufficient spread at the synoptic scale to enable observational impact through the ensemble data

  1. Development of the Ensemble Navy Aerosol Analysis Prediction System (ENAAPS and its application of the Data Assimilation Research Testbed (DART in support of aerosol forecasting

    Directory of Open Access Journals (Sweden)

    J. I. Rubin

    2016-03-01

    Full Text Available An ensemble-based forecast and data assimilation system has been developed for use in Navy aerosol forecasting. The system makes use of an ensemble of the Navy Aerosol Analysis Prediction System (ENAAPS at 1 × 1°, combined with an ensemble adjustment Kalman filter from NCAR's Data Assimilation Research Testbed (DART. The base ENAAPS-DART system discussed in this work utilizes the Navy Operational Global Analysis Prediction System (NOGAPS meteorological ensemble to drive offline NAAPS simulations coupled with the DART ensemble Kalman filter architecture to assimilate bias-corrected MODIS aerosol optical thickness (AOT retrievals. This work outlines the optimization of the 20-member ensemble system, including consideration of meteorology and source-perturbed ensemble members as well as covariance inflation. Additional tests with 80 meteorological and source members were also performed. An important finding of this work is that an adaptive covariance inflation method, which has not been previously tested for aerosol applications, was found to perform better than a temporally and spatially constant covariance inflation. Problems were identified with the constant inflation in regions with limited observational coverage. The second major finding of this work is that combined meteorology and aerosol source ensembles are superior to either in isolation and that both are necessary to produce a robust system with sufficient spread in the ensemble members as well as realistic correlation fields for spreading observational information. The inclusion of aerosol source ensembles improves correlation fields for large aerosol source regions, such as smoke and dust in Africa, by statistically separating freshly emitted from transported aerosol species. However, the source ensembles have limited efficacy during long-range transport. Conversely, the meteorological ensemble generates sufficient spread at the synoptic scale to enable observational impact

  2. Framework for control system development

    International Nuclear Information System (INIS)

    Cork, C.; Nishimura, Hiroshi

    1992-01-01

    Control systems being developed for the present generation of accelerators will need to adapt to changing machine and operating state conditions. Such systems must also be capable of evolving over the life of the accelerator operation. In this paper we present a framework for the development of adaptive control systems

  3. Energy, Exergy and Performance Analysis of Small-Scale Organic Rankine Cycle Systems for Electrical Power Generation Applicable in Rural Areas of Developing Countries

    Directory of Open Access Journals (Sweden)

    Suresh Baral

    2015-01-01

    Full Text Available This paper introduces the concept of installing a small-scale organic Rankine cycle system for the generation of electricity in remote areas of developing countries. The Organic Rankine Cycle Systems (ORC system uses a commercial magnetically-coupled scroll expander, plate type heat exchangers and plunger type working fluid feed pump. The heat source for the ORC system can be solar energy. A series of laboratory tests were conducted to confirm the cycle efficiency and expander power output of the system. Using the actual system data, the exergy destruction on the system components and exergy efficiency were assessed. Furthermore, the results of the variations of system energy and exergy efficiencies with different operating parameters, such as the evaporating and condensing pressures, degree of superheating, dead state temperature, expander inlet temperature and pressure ratio were illustrated. The system exhibited acceptable operational characteristics with good performance under a wide range of conditions. A heat source temperature of 121 °C is expected to deliver a power output of approximately 1.4 kW. In addition, the system cost analysis and financing mechanisms for the installation of the ORC system were discussed.

  4. Data Acquisition and Complex Systems Analysis in Critical Care: Developing the Intensive Care Unit of the Future

    Directory of Open Access Journals (Sweden)

    Frank J. Jacono

    2010-01-01

    Full Text Available Modern hospitals are equipped with sophisticated monitoring equipment that displays enormous volumes of raw data about the cardiopulmonary and neural functions of patients. The latest generation of bedside monitors attempts to present these data to the clinician in an integrated fashion to better represent the overall physiological condition of the patient. However, none of these systems are capable of extracting potentially important indices of pattern variability inherent within biological signals. This review has three main objectives. (1 To summarize the current state of data acquisition in the intensive care unit and identify limitations that must be overcome to achieve the goal of real-time processing of biological signals to capture subtleties identifying “early warning signals” hidden in physiologic patterns that may reflect current severity of the disease process and, more importantly, predict the likelihood of adverse progression and death or improvement and resolution. (2 To outline our approach to analyzing biological waveform data based on work in animal models of human disease. (3 To propose guidelines for the development, testing and implementation of integrated software and hardware solutions that will facilitate the novel application of complex systems approaches to biological waveform data with the goal of risk assessment.

  5. Time-to-collision analysis of pedestrian and pedal-cycle accidents for the development of autonomous emergency braking systems.

    Science.gov (United States)

    Lenard, James; Welsh, Ruth; Danton, Russell

    2018-06-01

    The aim of this study was to describe the position of pedestrians and pedal cyclists relative to the striking vehicle in the 3 s before impact. This information is essential for the development of effective autonomous emergency braking systems and relevant test conditions for consumer ratings. The UK RAIDS-OTS study provided 175 pedestrian and 127 pedal-cycle cases based on in-depth, at-scene investigations of a representative sample of accidents in 2000-2010. Pedal cyclists were scattered laterally more widely than pedestrians (90% of cyclists within around ±80° compared to ±20° for pedestrians), however their distance from the striking vehicle in the seconds before impact was no greater (90% of cyclists within 42 m at 3 s compared to 50 m for pedestrians). This data is consistent with a greater involvement of slow moving vehicles in cycle accidents. The implication of the results is that AEB systems for cyclists require almost complete 180° side-to-side vision but do not need a longer distance range than for pedestrians. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Development of a very fast spectral response measurement system for analysis of hydrogenated amorphous silicon solar cells and modules

    International Nuclear Information System (INIS)

    Rodríguez, J.A.; Fortes, M.; Alberte, C.; Vetter, M.; Andreu, J.

    2013-01-01

    Highlights: ► Spectral response equipment for measuring a-Si:H solar cells in a few seconds. ► Equipment based on 16 LEDs with simultaneous illumination of the solar cell. ► The current generated by each LED is analyzed by a Fast Fourier Transform. ► Cheap equipment without lock-in technology for the current measurement. ► Measurement error vs. conventional measurement less than 1% in J sc . - Abstract: An important requirement for a very fast spectral response measurement system is the simultaneous illumination of the solar cell at multiple well defined wavelengths. Nowadays this can be done by means of light emitting diodes (LEDs) available for a multitude of wavelengths. For the purpose to measure the spectral response (SR) of amorphous silicon solar cells a detailed characterization of LEDs emitting in the wavelength range from 300 nm to 800 nm was performed. In the here developed equipment the LED illumination is modulated in the frequency range from 100 Hz to 200 Hz and the current generated by each LED is analyzed by a Fast Fourier Transform (FFT) to determine the current component corresponding to each wavelength. The equipment provides a signal to noise ratio of 2–4 orders of magnitude for individual wavelengths resulting in a precise measurement of the SR over the whole wavelength range. The difference of the short circuit current determined from the SR is less than 1% in comparison to a conventional system with monochromator.

  7. The Development of Geographic Information System

    Directory of Open Access Journals (Sweden)

    Sugiharto Budi Santoso

    2004-01-01

    Full Text Available Early geographyc information systems facused on processing attribute data and geographic analysis, and had only rudimentary graphic and mapping capabilities. Phenomenal increase in computer processor speed and power in 1970s and 1980s had a major influence on GIS development. By the late 1980s, the technologies of the three main types of geo-based system had merge to various degrees. Most systems today offer powerfull capabilities for graphic production, processing of attributes, and analysis

  8. Liferay Portal Systems Development

    CERN Document Server

    Yuan, Jonas X

    2012-01-01

    This book focuses on teaching by example. Every chapter provides an overview, and then dives right into hands-on examples so you can see and play with the solution in your own environment. This book is for Java developers who don't need any prior experience with Liferay portal. Although Liferay portal makes heavy use of open source frameworks, no prior experience of using these is assumed.

  9. Hybrid wind–photovoltaic–diesel–battery system sizing tool development using empirical approach, life-cycle cost and performance analysis: A case study in Scotland

    International Nuclear Information System (INIS)

    Gan, Leong Kit; Shek, Jonathan K.H.; Mueller, Markus A.

    2015-01-01

    Highlights: • Methods of sizing a hybrid wind–photovoltaic–diesel–battery system is described. • The hybrid system components are modelled using empirical data. • Twenty years lifecycle cost of the hybrid system is considered. • The trade-offs between battery storage capacity and diesel fuel usage is studied. • A hybrid system sizing tool has been developed as a graphical user interface (GUI). - Abstract: The concept of off-grid hybrid wind energy system is financially attractive and more reliable than stand-alone power systems since it is based on more than one electricity generation source. One of the most expensive components in a stand-alone wind-power system is the energy storage system as very often it is oversized to increase system autonomy. In this work, we consider a hybrid system which consists of wind turbines, photovoltaic panels, diesel generator and battery storage. One of the main challenges experienced by project managers is the sizing of components for different sites. This challenge is due to the variability of the renewable energy resource and the load demand for different sites. This paper introduces a sizing model that has been developed and implemented as a graphical user interface, which predicts the optimum configuration of a hybrid system. In particular, this paper focuses on seeking the optimal size of the batteries and the diesel generator usage. Both of these components are seen to be trade-offs from each other. The model simulates real time operation of the hybrid system, using the annual measured hourly wind speed and solar irradiation. The benefit of using time series approach is that it reflects a more realistic situation; here, the peaks and troughs of the renewable energy resource are a central part of the sizing model. Finally, load sensitivity and hybrid system performance analysis are demonstrated.

  10. Software Development to Assist in the Processing and Analysis of Data Obtained Using Fiber Bragg Grating Interrogation Systems

    Science.gov (United States)

    Hicks, Rebecca

    2010-01-01

    capable of processing massive amounts of data in both real-time and post-flight settings, and to produce software segments that can be integrated to assist in the task as well. The selected software must be able to: (1) process massive amounts of data (up to 4GB) at a speed useful in a real-time settings (small fractions of a second); (2) process data in post-flight settings to allow test reproduction or further data analysis, inclusive; (3) produce, or make easier to produce, three-dimensional plots/graphs to make the data accessible to flight test engineers; and (4) be customized to allow users to use their own processing formulas or functions and display the data in formats they prefer. Several software programs were evaluated to determine their utility in completing the research objectives. These programs include: OriginLab, Graphis, 3D Grapher, Visualization Sciences Group (VSG) Avizo Wind, Interactive Analysis and Display System (IADS), SigmaPlot, and MATLAB.

  11. The Shielding Analysis for the I and C System(GSF-2002) Development of an Instrumented Fuel Capsule

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong Su; Kang, Young Hwan; Kim, Bong Goo; Park, Chang Je

    2006-09-15

    The Origen-2 code have been used to calculate the amount of nuclides generated in this study. It was validated by a comparison with the values calculated by this code and the measured ones by gathering the fission gases from two spent fuel rod (burned PWR fuel rods in Kori and Yungkwang). Error rate the between two values was estimated to be less than 10% in this study. The quantities of the nuclides generated by fission, calculated by the Origen-2, were larger than that by Origen-ARP. These differences of the two values are 1Ci to 40Ci. If the fuel is not intact, even if operated in a closed system, radioactive gases will be released to the gas flow tube from the instrumented capsule and the I and C system (GSF-2002) In a previous case study after 27 nuclides of Kr, Xe, I and Br series have been chosen, source term was generated. R/B ratio, used in this case, was calculated to serve this analysis with a reference to the ANS-5.4 model. And the leakage ratio adopted the result of the leak test in the PLUTO reactor. Specific points in the work place were determined and the radioactivity dose rates were calculated by running the Microshield 6.20. code at these points. Equivalent dose rates were 4.82X10-2{approx}3.74 {mu}Sv/hr at each point. These were distributed within the safety guide(6.25{mu}Sv/hr). In the failure case, almost all of the fission gases in the flow tube will be sucked into the delay tank, thus the condition of this tank will be a high radioactive area. Therefore the delay tank should be shielded by heavy materials and the thicknesses of them should be calculated with 9 cm and 20.5cm depending on performing conditions.

  12. Development of ultrasensitive spectroscopic analysis technology

    International Nuclear Information System (INIS)

    Cha, Hyung Ki; Song, K. S.; Kim, D. H.; Yang, K. H.; Jung, E. C.; Jeong, D. Y.; Yi, Y. J.; Lee, S. M.; Hong, K. H.; Han, J. M.; Yoo, B. D.; Rho, S. P.; Yi, J. H.; Park, H. M.; Cha, B. H.; Nam, S. M.; Lee, J. M.

    1997-09-01

    For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. 1) Laser resonance ionization technology, 2) Laser-induced rare isotope detection technology, 3) Laser-induced plasma analysis technology, 4) Microparticle analysis technology by using ion trap, 5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO 2 , SO 2 , etc. (author). 57 refs., 42 figs

  13. Development of ultrasensitive spectroscopic analysis technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyung Ki; Song, K. S.; Kim, D. H.; Yang, K. H.; Jung, E. C.; Jeong, D. Y.; Yi, Y. J.; Lee, S. M.; Hong, K. H.; Han, J. M.; Yoo, B. D.; Rho, S. P.; Yi, J. H.; Park, H. M.; Cha, B. H.; Nam, S. M.; Lee, J. M.

    1997-09-01

    For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. (1) Laser resonance ionization technology, (2) Laser-induced rare isotope detection technology, (3) Laser-induced plasma analysis technology, (4) Microparticle analysis technology by using ion trap, (5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO{sub 2}, SO{sub 2}, etc. (author). 57 refs., 42 figs.

  14. Development of environment radiation database management system

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Jong Gyu; Chung, Chang Hwa; Ryu, Chan Ho; Lee, Jin Yeong; Kim, Dong Hui; Lee, Hun Sun [Daeduk College, Taejon (Korea, Republic of)

    1999-03-15

    In this development, we constructed a database for efficient data processing and operating of radiation-environment related data. Se developed the source documents retrieval system and the current status printing system that supports a radiation environment dta collection, pre-processing and analysis. And, we designed and implemented the user interfaces and DB access routines based on WWW service policies on KINS Intranet. It is expected that the developed system, which organizes the information related to environmental radiation data systematically can be utilize for the accurate interpretation, analysis and evaluation.

  15. Development of environment radiation database management system

    International Nuclear Information System (INIS)

    Kang, Jong Gyu; Chung, Chang Hwa; Ryu, Chan Ho; Lee, Jin Yeong; Kim, Dong Hui; Lee, Hun Sun

    1999-03-01

    In this development, we constructed a database for efficient data processing and operating of radiation-environment related data. Se developed the source documents retrieval system and the current status printing system that supports a radiation environment dta collection, pre-processing and analysis. And, we designed and implemented the user interfaces and DB access routines based on WWW service policies on KINS Intranet. It is expected that the developed system, which organizes the information related to environmental radiation data systematically can be utilize for the accurate interpretation, analysis and evaluation

  16. Development of vitrified waste storage system

    International Nuclear Information System (INIS)

    Namiki, S.; Tani, Y.

    1993-01-01

    The authors have developed the radioactive waste vitrification technology and the vitrified waste storage technology. Regarding the vitrified waste storage system development, the authors have completed the design of two types of storage systems. One is a forced convection air cooling system, and the other is a natural convection air cooling system. They have carried out experiments and heat transfer analysis, seismic analysis, vitrified waste dropping and radiation shielding, etc. In this paper, the following three subjects, are discussed: the cooling air flow experiment, the wind effect experiment on the cooling air flow pattern, using a wind tunnel apparatus and the structural integrity evaluation on the dropping vitrified waste

  17. A simplified early-warning system for imminent landslide prediction based on failure index fragility curves developed through numerical analysis

    Directory of Open Access Journals (Sweden)

    Ugur Ozturk

    2016-07-01

    Full Text Available Early-warning systems (EWSs are crucial to reduce the risk of landslide, especially where the structural measures are not fully capable of preventing the devastating impact of such an event. Furthermore, designing and successfully implementing a complete landslide EWS is a highly complex task. The main technical challenges are linked to the definition of heterogeneous material properties (geotechnical and geomechanical parameters as well as a variety of the triggering factors. In addition, real-time data processing creates a significant complexity, since data collection and numerical models for risk assessment are time consuming tasks. Therefore, uncertainties in the physical properties of a landslide together with the data management represent the two crucial deficiencies in an efficient landslide EWS. Within this study the application is explored of the concept of fragility curves to landslides; fragility curves are widely used to simulate systems response to natural hazards, i.e. floods or earthquakes. The application of fragility curves to landslide risk assessment is believed to simplify emergency risk assessment; even though it cannot substitute detailed analysis during peace-time. A simplified risk assessment technique can remove some of the unclear features and decrease data processing time. The method is based on synthetic samples which are used to define the approximate failure thresholds for landslides, taking into account the materials and the piezometric levels. The results are presented in charts. The method presented in this paper, which is called failure index fragility curve (FIFC, allows assessment of the actual real-time risk in a case study that is based on the most appropriate FIFC. The application of an FIFC to a real case is presented as an example. This method to assess the landslide risk is another step towards a more integrated dynamic approach to a potential landslide prevention system. Even if it does not define

  18. Architecture Approach in System Development

    Directory of Open Access Journals (Sweden)

    Ladislav Burita

    2017-01-01

    Full Text Available The purpose of this paper is to describe a practical solution of architecture approach in system development. The software application is the system which optimizes the transport service. The first part of the paper defines the enterprise architecture, its parts and frameworks. Next is explained the NATO Architecture Framework (NAF, a tool for command and control systems development in military environment. The NAF is used for architecture design of the system for optimization of the transport service.

  19. Developing a HACCP-like system for improving animal health and welfare in organic egg production - based on an expert panel analysis.

    Science.gov (United States)

    Hegelund, L; Sørensen, J T

    2007-08-01

    In the process of developing a generic Hazard Analysis and Critical Control Point (HACCP)-like system for securing animal health and welfare in organic egg production, an expert panel analysis was used to perform the initial hazard analysis. Eighteen advisers and researchers in organic egg production were included in the expert panel. In a series of four questionnaires, the expert panel first scored 34 health and welfare problems seen in Danish organic egg production. Based on scorings of severity and occurrence, 10 problems were selected for further analysis. The experts subsequently suggested and scored risk factors for those problems and finally suggested control points, alarm values indicating the need for corrective actions in order to control the risk factors and monitoring frequencies of these. The 10 selected problems were hunger, thirst, piling, crop impaction, blackhead, pasteurellosis, bone fractures, cannibalism, predators and red mites. A total of 154 different risk factors were suggested for these problems. The 41 risk factors which rated highest in a combined scoring of importance and occurrence were selected for further analysis. There was a high degree of consensus between experts when scoring both problems and risk factors. The level of consensus, as defined by an interquartile range 1, was 79% to 100% when scoring the health and welfare problems (scale 1-5) and 77% to 95% when scoring the risk factors (scale 1-4). On average, 5.8 control points were suggested for every risk factor. Alarm values were often not detailed enough to be of practical significance and further analysis is needed in order to define these. The experts were highly diverse in their suggested monitoring frequencies and establishment of monitoring schemes should be part of developing the farm specific systems. An expert panel analysis based on questionnaires was a useful tool during the first steps of developing a HACCP plan, conducting a hazard analysis and suggesting control

  20. The Guided System Development Framework

    DEFF Research Database (Denmark)

    Carvalho Quaresma, Jose Nuno; Probst, Christian W.; Nielson, Flemming

    2011-01-01

    The Service-Oriented Computing paradigm has had significant influence on the Internet. With the emergence of this paradigm, it is important to provide tools that help developers designing and verifying such systems. In this article, we present the Guided System Development (GSD) Framework that aids...... and guides the developer on the specification of the system being developed, on choosing the appropriate standard protocols suites that achieve the required security properties, on providing an implementation of the specified system, and also on allowing the verification of its security properties....

  1. Software Development Standard for Mission Critical Systems

    Science.gov (United States)

    2014-03-17

    6.2 for the OCD DID identifier. 5.3.3 System Requirements Definition 1. Based on the analysis of user needs, the operational concepts, and other...AEROSPACE REPORT NO. TR-RS-2015-00012 Software Development Standard for Mission Critical Systems March 17, 2014 Richard. J. Adams1, Suellen...Final 3. DATES COVERED - 4. TITLE AND SUBTITLE Software Development Standard for Mission Critical Systems 5a. CONTRACT NUMBER FA8802-14-C-0001

  2. Development of a very fast spectral response measurement system for analysis of hydrogenated amorphous silicon solar cells and modules

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, J.A., E-mail: jose.rodriguez@tsolar.eu [Dept. Technology, Development and Innovation, T-Solar Global S.A., Parque Tecnologico de Galicia, Avda. de Vigo 5, E-32900 San Cibrao das Vinas (Ourense) (Spain); Fortes, M. [Departamento de Electronica e Computacion, Universidade de Santiago de Compostela, 15782 Santiago de Compostela (Spain); Alberte, C.; Vetter, M.; Andreu, J. [Dept. Technology, Development and Innovation, T-Solar Global S.A., Parque Tecnologico de Galicia, Avda. de Vigo 5, E-32900 San Cibrao das Vinas (Ourense) (Spain)

    2013-01-01

    Highlights: Black-Right-Pointing-Pointer Spectral response equipment for measuring a-Si:H solar cells in a few seconds. Black-Right-Pointing-Pointer Equipment based on 16 LEDs with simultaneous illumination of the solar cell. Black-Right-Pointing-Pointer The current generated by each LED is analyzed by a Fast Fourier Transform. Black-Right-Pointing-Pointer Cheap equipment without lock-in technology for the current measurement. Black-Right-Pointing-Pointer Measurement error vs. conventional measurement less than 1% in J{sub sc}. - Abstract: An important requirement for a very fast spectral response measurement system is the simultaneous illumination of the solar cell at multiple well defined wavelengths. Nowadays this can be done by means of light emitting diodes (LEDs) available for a multitude of wavelengths. For the purpose to measure the spectral response (SR) of amorphous silicon solar cells a detailed characterization of LEDs emitting in the wavelength range from 300 nm to 800 nm was performed. In the here developed equipment the LED illumination is modulated in the frequency range from 100 Hz to 200 Hz and the current generated by each LED is analyzed by a Fast Fourier Transform (FFT) to determine the current component corresponding to each wavelength. The equipment provides a signal to noise ratio of 2-4 orders of magnitude for individual wavelengths resulting in a precise measurement of the SR over the whole wavelength range. The difference of the short circuit current determined from the SR is less than 1% in comparison to a conventional system with monochromator.

  3. A Hyperspectral Gas Analysis System (HyGAS)

    National Research Council Canada - National Science Library

    Owensby, Pam

    1997-01-01

    A prototype software hyperspectral gas analysis system (HyGAS) for standoff (remote) gas detection, identification, and analysis was designed for use with developing hyperspectral imaging spectrometer systems...

  4. Information system development activities and inquiring systems

    DEFF Research Database (Denmark)

    Carugati, Andrea

    2008-01-01

    This article presents a framework that maps information system development (ISD) activities on systems for the creation of knowledge. This work addresses the relevant and persisting problem of improving the chances of ISD success. The article builds upon previous research on knowledge aspects...... provides a new way to see the development of a system in terms of the knowledge created in the process. The main practical implication of the framework is that it improves the managers' ability to guide ISD activities as knowledge activities embedded in a knowledge process, a crucial element in development...... of ISD, abandoning the idea of a monolithic approach to knowledge and presenting a pluralistic approach based on the idea that different inquiring systems can support micro-level ISD activities. The article is divided into two parts. The first part presents the theoretical development of the framework...

  5. Systems Analysis Reveals High Genetic and Antigen-Driven Predetermination of Antibody Repertoires throughout B Cell Development

    Directory of Open Access Journals (Sweden)

    Victor Greiff

    2017-05-01

    Full Text Available Antibody repertoire diversity and plasticity is crucial for broad protective immunity. Repertoires change in size and diversity across multiple B cell developmental stages and in response to antigen exposure. However, we still lack fundamental quantitative understanding of the extent to which repertoire diversity is predetermined. Therefore, we implemented a systems immunology framework for quantifying repertoire predetermination on three distinct levels: (1 B cell development (pre-B cell, naive B cell, plasma cell, (2 antigen exposure (three structurally different proteins, and (3 four antibody repertoire components (V-gene usage, clonal expansion, clonal diversity, repertoire size extracted from antibody repertoire sequencing data (400 million reads. Across all three levels, we detected a dynamic balance of high genetic (e.g., >90% for V-gene usage and clonal expansion in naive B cells and antigen-driven (e.g., 40% for clonal diversity in plasma cells predetermination and stochastic variation. Our study has implications for the prediction and manipulation of humoral immunity.

  6. Development of FAME Animation System

    International Nuclear Information System (INIS)

    Hasegawa, Yukihiro; Hamamatsu, Kiyotaka; Shirai, Hiroshi; Matsuda, Toshiaki; Watanabe, Hideto; Itakura, Hirofumi; Tahata, Yasunori

    1999-02-01

    In order to monitor an animation of magnetohydrodynamic equilibrium calculated by the FAME-II (Fast Analyzer for Magnetohydrodynamic Equilibrium-II) system, a FAME Animation System was developed. This system provides automatically the animation on workstations connected to network with the same period of JT-60U discharge sequence. Then, the system can supply the important information for JT-60U operators to determine control parameters of the succeeding discharge. This report describes the overview of the FAME Animation System. (author)

  7. Rhizoslides: paper-based growth system for non-destructive, high throughput phenotyping of root development by means of image analysis.

    Science.gov (United States)

    Le Marié, Chantal; Kirchgessner, Norbert; Marschall, Daniela; Walter, Achim; Hund, Andreas

    2014-01-01

    A quantitative characterization of root system architecture is currently being attempted for various reasons. Non-destructive, rapid analyses of root system architecture are difficult to perform due to the hidden nature of the root. Hence, improved methods to measure root architecture are necessary to support knowledge-based plant breeding and to analyse root growth responses to environmental changes. Here, we report on the development of a novel method to reveal growth and architecture of maize root systems. The method is based on the cultivation of different root types within several layers of two-dimensional, large (50 × 60 cm) plates (rhizoslides). A central plexiglass screen stabilizes the system and is covered on both sides with germination paper providing water and nutrients for the developing root, followed by a transparent cover foil to prevent the roots from falling dry and to stabilize the system. The embryonic roots grow hidden between a Plexiglas surface and paper, whereas crown roots grow visible between paper and the transparent cover. Long cultivation with good image quality up to 20 days (four fully developed leaves) was enhanced by suppressing fungi with a fungicide. Based on hyperspectral microscopy imaging, the quality of different germination papers was tested and three provided sufficient contrast to distinguish between roots and background (segmentation). Illumination, image acquisition and segmentation were optimised to facilitate efficient root image analysis. Several software packages were evaluated with regard to their precision and the time investment needed to measure root system architecture. The software 'Smart Root' allowed precise evaluation of root development but needed substantial user interference. 'GiaRoots' provided the best segmentation method for batch processing in combination with a good analysis of global root characteristics but overestimated root length due to thinning artefacts. 'WhinRhizo' offered the most rapid

  8. Deep geological disposal system development; thermal stress analysis and nonlinear structural analysis of spent nuclear fuel disposal canister under sudden rock movement

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Young Joo; Kim, Jin An; Ha, Jun Yong [Hongik University, Seoul (Korea)

    2002-04-01

    This work constitutes a summary of research and development made for design and dimensioning of the spent nuclear fuel disposal canister. Since the spent nuclear fuel disposal emits high temperature heats and much radiation, its careful treatment is required. For that, a long term(usually 10,000 years) safe repository for the spent nuclear fuel disposal should be secured. Usually this repository is expected to locate at a depth of 500m underground. In this work the thermal stress analysis of the spent nuclear fuel disposal canister in a deep repository at 500m underground is performed for the underground pressure variation. Thermal stresses of the canister due to thermal loads of the heat generation of spent nuclear fuels inside baskets are computed. The thermal stress analysis result shows that even though some high thermal stresses occur due to the heat generation of nuclear fuels inside baskets, the canister is still structurally safe because the maximum stress occurred in the canister is smaller than the yield strength of the cast iron. In this work, the nonlinear structural analysis for the composite structure of the spent nuclear fuel disposal canister and the 50cm thick bentonite buffer is also carried out to predict the collapse of the canister while the sudden rock movement of 10cm is applied on the composite structure. Elastoplastic material model is adopted. Drucker-Prager yield criterion is used for the material yield prediction of the bentonite buffer and von-Mises yield criterion is used for the material yield prediction of the canister(cast iron insert, copper outer shell and lid and bottom). The analysis result shows that even though very large deformations occur beyond the yield point in the bentonite buffer, the canister structure still endures elastic small strains and stresses below the yield strength. Analysis results also show that bending deformations occur in the canister structure due to the shear deformation of the bentonite buffer. 24

  9. Managing Risk in Systems Development.

    Science.gov (United States)

    DePaoli, Marilyn M.; And Others

    Stanford University's use of a risk assessment methodology to improve the management of systems development projects is discussed. After examining the concepts of hazard, peril, and risk as they relate to the system development process, three ways to assess risk are covered: size, structure, and technology. The overall objective for Stanford…

  10. Information Systems Development as a Research Method

    Directory of Open Access Journals (Sweden)

    Helen Hasan

    2003-11-01

    Full Text Available This paper takes the stance that some cases of information systems development can be considered knowledge creating activities, and, in those cases, information systems development can be a legitimate research method. In these cases not only is knowledge created about the development process itself but also a deeper understanding emerges about the organisational problem that the system is designed to solve. The paper begins with a brief overview of research in the design sciences and a comparison of research methods that are concerned with the design, and use, of information systems. This is followed by an assessment of the way systems development as a research method deals with the scientific research processes of data collection, analysis, synthesis and display. A case study, where the systems development research method was use, is described to illustrate the method and give the reader a better understanding of the approach.

  11. The development of human behavior analysis techniques

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Lee, Yong Hee; Park, Geun Ok; Cheon, Se Woo; Suh, Sang Moon; Oh, In Suk; Lee, Hyun Chul; Park, Jae Chang

    1997-07-01

    In this project, which is to study on man-machine interaction in Korean nuclear power plants, we developed SACOM (Simulation Analyzer with a Cognitive Operator Model), a tool for the assessment of task performance in the control rooms using software simulation, and also develop human error analysis and application techniques. SACOM was developed to assess operator`s physical workload, workload in information navigation at VDU workstations, and cognitive workload in procedural tasks. We developed trip analysis system including a procedure based on man-machine interaction analysis system including a procedure based on man-machine interaction analysis and a classification system. We analyzed a total of 277 trips occurred from 1978 to 1994 to produce trip summary information, and for 79 cases induced by human errors time-lined man-machine interactions. The INSTEC, a database system of our analysis results, was developed. The MARSTEC, a multimedia authoring and representation system for trip information, was also developed, and techniques for human error detection in human factors experiments were established. (author). 121 refs., 38 tabs., 52 figs.

  12. Methodology in the Assessment of Construction and Development Investment Projects, Including the Graphic Multi-Criteria Analysis – a Systemic Approach

    Science.gov (United States)

    Szafranko, Elżbieta

    2017-10-01

    Assessment of variant solutions developed for a building investment project needs to be made at the stage of planning. While considering alternative solutions, the investor defines various criteria, but a direct evaluation of the degree of their fulfilment by developed variant solutions can be very difficult. In practice, there are different methods which enable the user to include a large number of parameters into an analysis, but their implementation can be challenging. Some methods require advanced mathematical computations, preceded by complicating input data processing, and the generated results may not lend themselves easily to interpretation. Hence, during her research, the author has developed a systemic approach, which involves several methods and whose goal is to compare their outcome. The final stage of the proposed method consists of graphic interpretation of results. The method has been tested on a variety of building and development projects.

  13. Developing critical consciousness or justifying the system? A qualitative analysis of attributions for poverty and wealth among low-income racial/ethnic minority and immigrant women.

    Science.gov (United States)

    Godfrey, Erin B; Wolf, Sharon

    2016-01-01

    Economic inequality is a growing concern in the United States and globally. The current study uses qualitative techniques to (a) explore the attributions low-income racial/ethnic minority and immigrant women make for poverty and wealth in the U.S., and (b) clarify important links between attributions, critical consciousness development, and system justification theory. In-depth interview transcripts from 19 low-income immigrant Dominican and Mexican and native African American mothers in a large Northeastern city were analyzed using open coding techniques. Interview topics included perceptions of current economic inequality and mobility and experiences of daily economic hardships. Almost all respondents attributed economic inequality to individual factors (character flaws, lack of hard work). Structural explanations for poverty and wealth were expressed by fewer than half the sample and almost always paired with individual explanations. Moreover, individual attributions included system-justifying beliefs such as the belief in meritocracy and equality of opportunity and structural attributions represented varying levels of critical consciousness. Our analysis sheds new light on how and why individuals simultaneously hold individual and structural attributions and highlights key links between system justification and critical consciousness. It shows that critical consciousness and system justification do not represent opposite stances along a single underlying continuum, but are distinct belief systems and motivations. It also suggests that the motive to justify the system is a key psychological process impeding the development of critical consciousness. Implications for scholarship and intervention are discussed. (c) 2016 APA, all rights reserved).

  14. Developing critical consciousness or justifying the system? A qualitative analysis of attributions for poverty and wealth among low-income racial/ethnic minority and immigrant women

    Science.gov (United States)

    Godfrey, Erin B.; Wolf, Sharon

    2015-01-01

    Objectives Economic inequality is a growing concern in the United States and globally. The current study uses qualitative techniques to (1) explore the attributions low-income racial/ethnic minority and immigrant women make for poverty and wealth in the U.S., and (2) clarify important links between attributions, critical consciousness development and system justification theory. Methods In-depth interview transcripts from 19 low-income immigrant Dominican and Mexican and native African-American mothers in a large Northeastern city were analyzed using open coding techniques. Interview topics included perceptions of current economic inequality and mobility and experiences of daily economic hardships. Results Almost all respondents attributed economic inequality to individual factors (character flaws, lack of hard work). Structural explanations for poverty and wealth were expressed by less than half the sample and almost always paired with individual explanations. Moreover, individual attributions included system-justifying beliefs such as the belief in meritocracy and equality of opportunity and structural attributions represented varying levels of critical consciousness. Conclusions Our analysis sheds new light on how and why individuals simultaneously hold individual and structural attributions and highlights key links between system justification and critical consciousness. It shows that critical consciousness and system justification do not represent opposite stances along a single underlying continuum, but are distinct belief systems and motivations. It also suggests that the motive to justify the system is a key psychological process impeding the development of critical consciousness. Implications for scholarship and intervention are discussed. PMID:25915116

  15. Inserting Agility in System Development

    Science.gov (United States)

    2012-07-01

    Agile IT Acquisition, IT Box, Scrum Inserting Agility in System Development Matthew R. Kennedy and Lt Col Dan Ward, USAF With the fast-paced nature... Scrum is a process to manage a product, eXtreme Program- ming (XP) is an agile development methodology focused on software development as a whole. XP...249 A Publication of the Defense Acquisition University http://www.dau.mil Keywords: Agile , Systems Engineering, Information Technology (IT), DoD

  16. Logical analysis of biological systems

    DEFF Research Database (Denmark)

    Mardare, Radu Iulian

    2005-01-01

    R. Mardare, Logical analysis of biological systems. Fundamenta Informaticae, N 64:271-285, 2005.......R. Mardare, Logical analysis of biological systems. Fundamenta Informaticae, N 64:271-285, 2005....

  17. Development of cask and transportation system

    International Nuclear Information System (INIS)

    Ro, Seong Gy; Kang, Hee Dong; Lee, Heung Young; Seo, Ki Suk; Koo, Jung Hoe; Jung, Sung Hwan; Yoon, Jung Hyun; Lee, Ju Chan; Bang, Kyung Sik; Baek, Chang Yeol

    1992-03-01

    The major goal of this project is to establish the safe transport system and obtain the necessary data for cask development by during research work for the design and safety test of shipping cask. The analysis technique using computer code for design has been studied in the field of structure, thermal and shielding analysis in this study. And also the test and measurement technology was developed for the measuring system of drop and fire test. It is expected that research activity ensured in this job will enable us to ultilize the basic data for the cask development. (Author)

  18. Regional Development Sustainability Analysis Consept

    Directory of Open Access Journals (Sweden)

    Janno Reiljan

    2014-08-01

    Full Text Available Problems associated with the qualitative analysis and quantitative measurement of sustainability, and opportunities for connecting the concept with the methodological basis of development assessment and the essence of the subject that values sustainability are dealed. The goal of article is to work out the basics for analysis of the regional development in a country in terms and framework of sustainability concept. The article starts by outlining the definition of sustainability, which is followed by an analysis of the nature of sustainability. The third subsection highlights the demands of the decision-making process in guaranteeing sustainability and then considers sustainability in a competitive environment. In the second part of article the sustainable development conception is implemented in regional development sustainability analysis.

  19. Development of communications analysis techniques

    Science.gov (United States)

    Shelton, R. D.

    1972-01-01

    Major results from the frequency analysis of system program (FASP) are reported. The FASP procedure was designed to analyze or design linear dynamic systems, but can be used to solve any problem that can be described by a system of linear time invariant differential equations. The program also shows plots of performance changes as design parameters are adjusted. Experimental results on narrowband FM distortion are also reported.

  20. Business system: Sustainable development and anticipatory system

    Directory of Open Access Journals (Sweden)

    Vojko Potočan

    2002-01-01

    Full Text Available The existence and development of humankind depends mainly upon the co-ordinated operation of all areas and levels of human activity. However, in theory and in practice there is no model of operation, which would provide a harmonized and target oriented development. A partial solution is offered by sustainable development, which tries to define and carry out common goals of mankind with a harmonized implementation of human activities at all levels of its living and behaviour. Companies belong to central institutions of modern society which essentially co–create the sustainability of society. The company’s endeavour by simulation to prepare models of their goals concerning their internal and external environment. On the base of systemic treatment, we can define companies as business system, which can survive in a log-run only on the basis of sustainable development. The business system can also be supported by the application of the anticipatory systems. The anticipatory systems can be, in this sense, understood as an entity of the methodological approach, techniques and modes of work. Their characteristics have, a direct impact on the determination of goals, on the orientation of operation, and hence on the achievement of the business system results.

  1. Regional Development Sustainability Analysis Consept

    OpenAIRE

    Janno Reiljan

    2014-01-01

    Problems associated with the qualitative analysis and quantitative measurement of sustainability, and opportunities for connecting the concept with the methodological basis of development assessment and the essence of the subject that values sustainability are dealed. The goal of article is to work out the basics for analysis of the regional development in a country in terms and framework of sustainability concept. The article starts by outlining the definition of sustainability, which is fol...

  2. Model Development for Power System Analysis with a Substantial Wind Energy Capacity Installed in the Nordic grid

    DEFF Research Database (Denmark)

    Carlson, Ola; Perdana, Abram; Chen, Peiyuan

    2011-01-01

    Högsåra wind farm. Measurement results from real scale tests of frequency control were presented in the project, where different amount of fluctuating wind power were injected into a power system. The allowed limit for system power fluctuation was shown, which is given by the acceptable variation on grid...... power flow description. For the PSST (Power System Simulation Tool) , which optimizes power flow by minimizing the cost of generation and assumes a perfect market with nodal pricing, focus has been on interpreting the result establishing time series of area prices as well as including power losses...

  3. Information Management System Development for the Characterization and Analysis of Human Error in Naval Aviation Maintenance Related Mishaps

    National Research Council Canada - National Science Library

    Wood, Brian

    2000-01-01

    ..., incidents, and personal injuries, is the foundation of this management tool. The target audience for this information management system tool includes safety personnel, mishap investigators, Aircraft Mishap Board (AMB...

  4. Machine-readable files developed for the High Plains Regional Aquifer-System analysis in parts of Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming

    Science.gov (United States)

    Ferrigno, C.F.

    1986-01-01

    Machine-readable files were developed for the High Plains Regional Aquifer-System Analysis project are stored on two magnetic tapes available from the U.S. Geological Survey. The first tape contains computer programs that were used to prepare, store, retrieve, organize, and preserve the areal interpretive data collected by the project staff. The second tape contains 134 data files that can be divided into five general classes: (1) Aquifer geometry data, (2) aquifer and water characteristics , (3) water levels, (4) climatological data, and (5) land use and water use data. (Author 's abstract)

  5. Development of Cubesat Propulsion Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall objective of this IRAD will be to develop a propulsion system that can be cheaply and reliably used for NASA GSFC cubesat missions. Reliability will be...

  6. Radioisotope Power Systems Technology Development

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the RPS's technology portfolio is to advance performance of radioisotope power systems through new and novel innovations being developed and transitioned...

  7. Active Debris Removal (ADR) System Architecture Analysis Tool (SAAT) Prototype for Orbital Debris Stabilization and Removal Architecture Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — It is critically important that a physics based ADR SAAT prototype be developed that can be refined and used across the community to study and analyze various remote...

  8. Development of a Framework for Model-Based Analysis, Uncertainty Quantification, and Robust Control Design of Nonlinear Smart Composite Systems

    Science.gov (United States)

    2015-06-04

    of hysteretic macro - fiber composite (MFC) and shape memory alloy (SMA) models. The goal was to develop a theoretical and numerical framework and...A major component of the program focused on the development of this framework in the context of hysteretic macro - fiber composite (MFC) and shape...employing macro - fiber composites (MFC) and shape memory alloys (SMA). As illustrated in Figure 1, MFC are comprised of lead zirconate titanate (PZT) fibers

  9. Development of Web-based Load Duration Curve system for analysis of total maximum daily load and water quality characteristics in a waterbody.

    Science.gov (United States)

    Kim, Jonggun; Engel, Bernard A; Park, Youn Shik; Theller, Larry; Chaubey, Indrajeet; Kong, Dong Soo; Lim, Kyoung Jae

    2012-04-30

    In many states of the US, the total maximum daily load program has been widely developed for watershed water quality restoration and management. However, the total maximum daily load is often represented as an average daily pollutant load based on average long-term flow conditions, and as such, it does not adequately describe the problems they aim to address. Without an adequate characterization of water quality problems, appropriate solutions cannot be identified and implemented. The total maximum daily load approach should consider adequate water quality characterizations based on overall flow conditions rather than on a single flow event such as average daily flow. The Load Duration Curve, which provides opportunities for enhanced pollutant source and best management practice targeting both in the total maximum daily load development and in water quality restoration efforts, has been used for the determination of appropriate total maximum daily load targets. However, at least 30 min to an hour is needed for unskilled people based on our experiences to generate the Load Duration Curve using a desktop-based spreadsheet computer program. Therefore, in this study, the Web-based Load Duration Curve system (https://engineering.purdue.edu/∼ldc/) was developed and applied to a study watershed for an analysis of the total maximum daily load and water quality characteristics in the watershed. This system provides diverse options for Flow Duration Curve and Load Duration Curve analysis of a watershed of interest in a brief time. The Web-based Load Duration Curve system is useful for characterizing the problem according to flow regimes, and for providing a visual representation that enables an easy understanding of the problem and the total maximum daily load targets. In addition, this system will be able to help researchers identify appropriate best management practices within watersheds. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Development of the auditory system

    OpenAIRE

    Litovsky, Ruth

    2015-01-01

    Auditory development involves changes in the peripheral and central nervous system along the auditory pathways, and these occur naturally, and in response to stimulation. Human development occurs along a trajectory that can last decades, and is studied using behavioral psychophysics, as well as physiologic measurements with neural imaging. The auditory system constructs a perceptual space that takes information from objects and groups, segregates sounds, and provides meaning and access to com...

  11. Film analysis systems and applications

    Energy Technology Data Exchange (ETDEWEB)

    Yonekura, Y.; Brill, A.B.

    1981-01-01

    The different components that can be used in modern film analysis systems are reviewed. TV camera and charge-coupled device sensors coupled to computers provide low cost systems for applications such as those described. The autoradiography (ARG) method provides an important tool for medical research and is especially useful for the development of new radiopharmaceutical compounds. Biodistribution information is needed for estimation of radiation dose, and for interpretation of the significance of observed patterns. The need for such precise information is heightened when one seeks to elucidate physiological principles/factors in normal and experimental models of disease. The poor spatial resolution achieved with current PET-imaging systems limits the information on radioreceptor mapping, neutrotransmitter, and neuroleptic drug distribution that can be achieved from patient studies. The artful use of ARG in carefully-controlled animal studies will be required to provide the additional information needed to fully understand results obtained with this new important research tool. (ERB)

  12. Film analysis systems and applications

    International Nuclear Information System (INIS)

    Yonekura, Y.; Brill, A.B.

    1981-01-01

    The different components that can be used in modern film analysis systems are reviewed. TV camera and charge-coupled device sensors coupled to computers provide low cost systems for applications such as those described. The autoradiography (ARG) method provides an important tool for medical research and is especially useful for the development of new radiopharmaceutical compounds. Biodistribution information is needed for estimation of radiation dose, and for interpretation of the significance of observed patterns. The need for such precise information is heightened when one seeks to elucidate physiological principles/factors in normal and experimental models of disease. The poor spatial resolution achieved with current PET-imaging systems limits the information on radioreceptor mapping, neutrotransmitter, and neuroleptic drug distribution that can be achieved from patient studies. The artful use of ARG in carefully-controlled animal studies will be required to provide the additional information needed to fully understand results obtained with this new important research tool

  13. Development of core technology for KNGR system design; detailed analysis and related issue evaluation for MMI testing data

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dhong Ha [Suwon University, Whasung (Korea)

    2002-03-01

    This study evaluated man-machine interface (MMI) features of the advanced control room of Korea Next Generation Reactor. Major issues to be evaluated included: (1) supportability of large display panel (LDP) during passive monitoring (2) supportability of work station display (WSD) for interpretation and planning (3) supportability of combination of alarm, WSD, LDP and computerized procedure system (CPS) for interpretation and planning during single and multiple fault event, (4) supportability of softcontrol (SC) during simple operator-paced control task, (5) supportability of softcontrol (SC) during conditional operator-paced control task, and (6) supportability of alarm system for emergent operation procedure. Four operator teams of RO, TO, and SRO participated the test scenarios consisting of AOP and EOP. Performance data measuring situation awareness, workload, operation errors, and team work and operators' opinions for MMI features of advanced control room were collected during the experiment. Operators showed positive responses for issues (1) supportability of LDP during passive monitoring (2) supportability of WSD for interpretation and planning (3) supportability of combination of alarm, WSD, LDP and CPS for interpretation and planning during single and multiple fault event, (4) supportability of alarm system for normal operation procedure, while they suggested some needs to improve for issues: (1) supportability of softcontrol (SC) during simple and conditional operator-paced control task, (2) supportability of alarm system for emergent situation. 7 refs., 36 figs., 83 tabs. (Author)

  14. Systems analysis of a security alarm system

    International Nuclear Information System (INIS)

    Schiff, A.

    1975-01-01

    When the Lawrence Livermore Laboratory found that its security alarm system was causing more false alarms and maintenance costs than LLL felt was tolerable, a systems analysis was undertaken to determine what should be done about the situation. This report contains an analysis of security alarm systems in general and ends with a review of the existing Security Alarm Control Console (SACC) and recommendations for its improvement, growth and change. (U.S.)

  15. Automation for System Safety Analysis

    Science.gov (United States)

    Malin, Jane T.; Fleming, Land; Throop, David; Thronesbery, Carroll; Flores, Joshua; Bennett, Ted; Wennberg, Paul

    2009-01-01

    This presentation describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis and simulation to identify and evaluate possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations and scenarios; and 4) identify resulting candidate scenarios for software integration testing. There has been significant technical progress in model extraction from Orion program text sources, architecture model derivation (components and connections) and documentation of extraction sources. Models have been derived from Internal Interface Requirements Documents (IIRDs) and FMEA documents. Linguistic text processing is used to extract model parts and relationships, and the Aerospace Ontology also aids automated model development from the extracted information. Visualizations of these models assist analysts in requirements overview and in checking consistency and completeness.

  16. Photurgen: The open source software for the analysis and design of hybrid solar wind energy systems in the Caribbean region: A brief introduction to its development policy

    Directory of Open Access Journals (Sweden)

    Daren Watson

    2017-11-01

    Full Text Available Hybrid Renewable Energy Systems (HRES use multiple renewable resources such as hydro, solar and wind collaboratively to produce energy that can meet a defined load demand continuously. Their combination can lead to the improvement in the systems efficiency and overall reliability. However, the level of penetration of HRES in the Caribbean region is less than its expected potential. The constraints generated by their complexity and the costly access to useful energy planning tools is a limitation to their implementation. Therefore, in collaboration with the Alternative Energy Research Group, UWI Mona, we develop a free Linear Optimization software, Photurgen, for the design and analysis of hybrid solar-wind systems within the Caribbean region. Solar-wind hybrid systems are simulated based on historic climatological resources and instantaneous load consumption data, providing the user with graphics and advice for their optimal configuration. This paper introduces the first version of Photurgen and its associated development policies. This tool is one simple solution to be applied to increase the rate of autonomous and grid-tied households within the region, with Jamaica being its experimental location.

  17. Power system reliability analysis using fault trees

    International Nuclear Information System (INIS)

    Volkanovski, A.; Cepin, M.; Mavko, B.

    2006-01-01

    The power system reliability analysis method is developed from the aspect of reliable delivery of electrical energy to customers. The method is developed based on the fault tree analysis, which is widely applied in the Probabilistic Safety Assessment (PSA). The method is adapted for the power system reliability analysis. The method is developed in a way that only the basic reliability parameters of the analysed power system are necessary as an input for the calculation of reliability indices of the system. The modeling and analysis was performed on an example power system consisting of eight substations. The results include the level of reliability of current power system configuration, the combinations of component failures resulting in a failed power delivery to loads, and the importance factors for components and subsystems. (author)

  18. Recent advancements on the development of web-based applications for the implementation of seismic analysis and surveillance systems

    Science.gov (United States)

    Friberg, P. A.; Luis, R. S.; Quintiliani, M.; Lisowski, S.; Hunter, S.

    2014-12-01

    Recently, a novel set of modules has been included in the Open Source Earthworm seismic data processing system, supporting the use of web applications. These include the Mole sub-system, for storing relevant event data in a MySQL database (see M. Quintiliani and S. Pintore, SRL, 2013), and an embedded webserver, Moleserv, for serving such data to web clients in QuakeML format. These modules have enabled, for the first time using Earthworm, the use of web applications for seismic data processing. These can greatly simplify the operation and maintenance of seismic data processing centers by having one or more servers providing the relevant data as well as the data processing applications themselves to client machines running arbitrary operating systems.Web applications with secure online web access allow operators to work anywhere, without the often cumbersome and bandwidth hungry use of secure shell or virtual private networks. Furthermore, web applications can seamlessly access third party data repositories to acquire additional information, such as maps. Finally, the usage of HTML email brought the possibility of specialized web applications, to be used in email clients. This is the case of EWHTMLEmail, which produces event notification emails that are in fact simple web applications for plotting relevant seismic data.Providing web services as part of Earthworm has enabled a number of other tools as well. One is ISTI's EZ Earthworm, a web based command and control system for an otherwise command line driven system; another is a waveform web service. The waveform web service serves Earthworm data to additional web clients for plotting, picking, and other web-based processing tools. The current Earthworm waveform web service hosts an advanced plotting capability for providing views of event-based waveforms from a Mole database served by Moleserve.The current trend towards the usage of cloud services supported by web applications is driving improvements in Java

  19. Systems Analysis Department annual progress report 1998

    DEFF Research Database (Denmark)

    1999-01-01

    The report describes the work of the Systems Analysis Department at Risø National Laboratory during 1998. The department undertakes research within Energy Systems Analysis, Integrated Energy, Environment and Development Planning - UNEP Centre, IndustrialSafety and Reliability, Man/Machine Interac....../Machine Interaction, and Technology Scenarios. The report includes lists of publications, lectures, committees and staff members....

  20. Systems Analysis Department annual progress report 1999

    DEFF Research Database (Denmark)

    2000-01-01

    This report describes the work of the Systems Analysis Department at Risø National Laboratory during 1999. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety,Realiability and Human Factors, and Technology...

  1. Systems Analysis department. Annual progress report 1997

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Olsson, Charlotte; Petersen, Kurt E.

    1998-03-01

    The report describes the work of the Systems Analysis Department at Risoe National Laboratory during 1997. The department is undertaking research within Energy systems Analysis, Integrated Energy, Environment and Development Planning - UNEP Centre, Industrial Safety and Reliability and Man/Machine Interaction. The report includes lists of publications lectures, committees and staff members. (au) 110 refs.

  2. Systems Analysis Department. Annual Report 2000

    Energy Technology Data Exchange (ETDEWEB)

    Duijm, N.J.; Jensen, E.; Larsen, H.; Olsson, C.

    2001-05-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2000. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and lists of publications, committees and staff members. (au)

  3. Systems Analysis Department annual progress report 1998

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Olsson, Charlotte; Loevborg, Leif [eds.

    1999-03-01

    The report describes the work of the Systems Analysis Department at Risoe National Laboratory during 1998. The department undertakes research within Energy Systems Analysis, Integrated Energy, Environment and Development Planning - UNEP Centre, Industrial Safety and Reliability, Man/Machine Interaction and Technology Scenarios. The report includes lists of publications, lectures, committees and staff members. (au) 111 refs.

  4. System Analysis Department. Annual Report 2002

    Energy Technology Data Exchange (ETDEWEB)

    Duijm, N.J.; Jensen, E.; Larsen, H.; Skipper, S. (eds.)

    2002-04-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2001. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and lists of publications, committees and staff members. (au)

  5. Analysis and comparison of transportation security systems

    International Nuclear Information System (INIS)

    Rinne, R.L.

    1976-05-01

    The role of modeling in the analysis of transportation security systems is described. Various modeling approaches are outlined. The conflict model developed in Sandia Laboratories' Transportation Mode Analysis for the NRC Special Safeguards Study is used to demonstrate the capability of models to determine system sensitivities and compare alternatives

  6. Reliability analysis of flood defence systems

    NARCIS (Netherlands)

    Steenbergen, H.M.G.M.; Lassing, B.L.; Vrouwenvelder, A.C.W.M.; Waarts, P.H.

    2004-01-01

    In recent years an advanced program for the reliability analysis of flood defence systems has been under development. This paper describes the global data requirements for the application and the setup of the models. The analysis generates the probability of system failure and the contribution of

  7. Systems Analysis Department. Annual Report 2001

    Energy Technology Data Exchange (ETDEWEB)

    Duijm, N.J.; Jensen, E.; Larsen, H.; Skipper, S. (eds.)

    2002-04-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2001. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and lists of publications, committees and staff members. (au)

  8. Types and concept analysis for legacy systems

    NARCIS (Netherlands)

    T. Kuipers (Tobias); L.M.F. Moonen (Leon)

    2000-01-01

    textabstractWe combine type inference and concept analysis in order to gain insight into legacy software systems. Type inference for Cobol yields the types for variables and program parameters. These types are used to perform mathematical concept analysis on legacy systems. We have developed

  9. Systems Analysis Department annual report 2002

    DEFF Research Database (Denmark)

    2003-01-01

    This report describes the work of the Systems Analysis Department at Risø National Laboratory during 2002. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning – UNEP Centre, Safety,Reliability and Human Factors, and Technology Scenar...

  10. Systems Analysis Department annual report 2000

    DEFF Research Database (Denmark)

    2001-01-01

    This report describes the work of the Systems Analysis Department at Risø National Laboratory during 2000. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety,Reliability and Human Factors, and Technology Scenar...

  11. Systems Analysis Department annual report 2001

    DEFF Research Database (Denmark)

    2002-01-01

    This report describes the work of the Systems Analysis Department at Risø National Laboratory during 2001. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety,Reliability and Human Factors, and Technology Scenar...

  12. Systems Analysis Department. Annual Progress Report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Olsson, Charlotte; Loevborg, Leif [eds.

    2000-03-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 1999. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning-UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and lists of publications, committees and staff members. (au)

  13. Systems Analysis Department. Annual Report 2003

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H.; Olsson, C. (eds.)

    2004-04-01

    This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2003. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and list of staff members. (au)

  14. Development of a stereofluoroscopy system

    Science.gov (United States)

    Rivers, D. B.

    1979-01-01

    A technique of 3-D video imaging, was developed for use on manned missions for observation and control of remote manipulators. An improved medical diagnostic fluoroscope with a stereo, real-time output was also developed. An explanation of how this system works, and recommendations for future work in this area are presented.

  15. Managing Sustainable Information Systems Development

    DEFF Research Database (Denmark)

    Kautz, Karlheinz

    2013-01-01

    Sustainable information systems development (ISD) in the context of this paper is not about products that support sustainability at large with its environmental, economic and social dimensions and little about the development of sustainable products, which are both without doubt important topics...

  16. Strategic Options Development and Analysis

    Science.gov (United States)

    Ackermann, Fran; Eden, Colin

    Strategic Options Development and Analysis (SODA) enables a group or individual to construct a graphical representation of a problematic situation, and thus explore options and their ramifications with respect to a complex system of goals or objectives. In addition the method aims to help groups arrive at a negotiated agreement about how to act to resolve the situation. It is based upon the use of causal mapping - a formally constructed means-ends network - as representation form. Because the picture has been constructed using the natural language of the problem owners it becomes a model of the situation that is ‘owned' by those who define the problem. The use of formalities for the construction of the model makes it amenable to a range of analyses as well as encouraging reflection and a deeper understanding. These analyses can be used in a ‘rough and ready' manner by visual inspection or through the use of specialist causal mapping software (Decision Explorer). Each of the analyses helps a group or individual discover important features of the problem situation, and these features facilitate agreeing agood solution. The SODA process is aimed at helping a group learn about the situation they face before they reach agreements. Most significantly the exploration through the causal map leads to a higher probability of more creative solutions and promotes solutions that are more likely to be implemented because the problem construction process is wider and more likely to include richer social dimensions about the blockages to action and organizational change. The basic theories that inform SODA derive from cognitive psychology and social negotiation, where the model acts as a continuously changing representation of the problematic situation - changing as the views of a person or group shift through learning and exploration. This chapter, jointly written by two leading practitioner academics and the original developers of SODA, Colin Eden and Fran Ackermann

  17. Data Acquisition and Complex Systems Analysis in Critical Care: Developing the Intensive Care Unit of the Future

    OpenAIRE

    Jacono, Frank J.; De Georgia, Michael A.; Wilson, Christopher G.; Dick, Thomas E.; Loparo, Kenneth A.

    2010-01-01

    Modern hospitals are equipped with sophisticated monitoring equipment that displays enormous volumes of raw data about the cardiopulmonary and neural functions of patients. The latest generation of bedside monitors attempts to present these data to the clinician in an integrated fashion to better represent the overall physiological condition of the patient. However, none of these systems are capable of extracting potentially important indices of pattern variability inherent within biological ...

  18. [Development of the lung cancer diagnostic system].

    Science.gov (United States)

    Lv, You-Jiang; Yu, Shou-Yi

    2009-07-01

    To develop a lung cancer diagnosis system. A retrospective analysis was conducted in 1883 patients with primary lung cancer or benign pulmonary diseases (pneumonia, tuberculosis, or pneumonia pseudotumor). SPSS11.5 software was used for data processing. For the relevant factors, a non-factor Logistic regression analysis was used followed by establishment of the regression model. Microsoft Visual Studio 2005 system development platform and VB.Net corresponding language were used to develop the lung cancer diagnosis system. The non-factor multi-factor regression model showed a goodness-of-fit (R2) of the model of 0.806, with a diagnostic accuracy for benign lung diseases of 92.8%, a diagnostic accuracy for lung cancer of 89.0%, and an overall accuracy of 90.8%. The model system for early clinical diagnosis of lung cancer has been established.

  19. Development of an automatic scanning system for nuclear emulsion analysis in the OPERA experiment and study of neutrino interactions location

    International Nuclear Information System (INIS)

    Arrabito, L.

    2007-10-01

    Following Super Kamiokande and K2K experiments, Opera (Oscillation Project with Emulsion tracking Apparatus), aims to confirm neutrino oscillation in the atmospheric sector. Taking advantage of a technique already employed in Chorus and in Donut, the Emulsion Cloud Chamber (ECC), Opera will be able to observe the ν μ → ν τ oscillation, through the ν τ appearance in a pure ν μ beam. The Opera experiment, with its ∼ 100000 m 2 of nuclear emulsions, needs a very fast automatic scanning system. Optical and mechanics components have been customized in order to achieve a speed of about 20 cm 2 /hour per emulsion layer (44 μm thick), while keeping a sub-micro-metric resolution. The first part of this thesis was dedicated to the optimization of 4 scanning systems at the French scanning station, based in Lyon. An experimental study on a dry objective scanning system has also been realized. The obtained results show that the performances of dry scanning are similar with respect to the traditional oil scanning, so that it can be successfully used for Opera. The second part of this work was devoted to the study of the neutrino interaction location and reconstruction strategy actually used in Opera. A dedicated test beam was performed at CERN in order to simulate Opera conditions. The obtained results definitely confirm that the proposed strategy is well adapted for tau search. (author)

  20. Development and characterization of a portable total reflection X-ray fluorescence system using a waveguide for trace elements analysis.

    Science.gov (United States)

    da Costa, Ana Cristina M; de Araújo, Ubiratan B; de Jesus, Edgar F O; Anjos, Marcelino J; Lopes, Ricardo T

    2014-01-01

    This paper presents a portable total reflection X-ray fluorescence system composed of a 15 W X-ray tube, with a gold anode, a waveguide constituted by two Perspex(®) parallel plates, a Si PIN detector and a quartz optical flat. The critical angle of the total reflection system was experimentally determined by measuring a zinc solution (100 mg/L). The accuracy of the system was checked using SRM 1577b Bovine Liver by NIST as standard reference material. We obtained the absolute detection limits of the following elements: P (450 ± 40 ng), S (200 ± 31 ng), K (30 ± 2.5 ng), Ca (19 ± 3.5 ng), Mn (4.1 ± 0.5 ng), Fe (3.6 ± 0.9 ng), Cu (3.3 ± 0.4 ng) and Zn (3.5 ± 0.3 ng). This paper shows that it is possible to produce total reflection X-ray fluorescence with very compact, efficient, low-cost and easy-to-handle instrumentation using a low-power X-ray tube and a Si PIN compact detector.

  1. Assessment of the Coordination Ability of Sustainable Social-Ecological Systems Development Based on a Set Pair Analysis: A Case Study in Yanchi County, China

    Directory of Open Access Journals (Sweden)

    Ya Wang

    2016-08-01

    Full Text Available Sandy desertification is one of the most severe ecological problems in the world. Essentially, it is land degradation caused by discordance in the Social-Ecological Systems (SES. The ability to coordinate SES is a principal characteristic of regional sustainable development and a key factor in desertification control. This paper directly and comprehensively evaluates the ability to coordinate SES in the desertification reversal process. Assessment indicators and standards for SES have been established using statistical data and materials from government agencies. We applied a coordinated development model based on Identical-Discrepancy-Contrary (IDC situational ranking of a Set Pair Analysis (SPA to analyze the change in Yanchi County’s coordination ability since it implemented the grazing prohibition policy. The results indicated that Yanchi County was basically in the secondary grade of the national sustainable development level, and the subsystems’ development trend was relatively stable. Coordinate ability increased from 0.686 in 2003 to 0.957 in 2014 and experienced “weak coordination to basic coordination to high coordination” development processes. We concluded that drought, the grazing prohibition dilemma and the ecological footprint were key factors impeding the coordination of SES development in this area. These findings should provide information about desertification control and ecological policy implementation to guarantee sustainable rehabilitation.

  2. Electric and Hybrid Vehicle System Research and Development Project: Hybrid Vehicle Potential Assessment. Volume VI. Cost analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, K.S.

    1979-09-30

    The purpose of the cost analysis is to determine the economic feasibility of a variety of hybrid vehicles with respect to conventional vehicles specifically designed for the same duty cycle defined by the mission analysis. Several different hybrid configurations including parallel, parallel-flywheel, and series vehicles were evaluated. The ramifications of incorporating examples of advanced batteries, these being the advanced lead-acid, nickel-zinc, and sodium sulfur were also investigated. Vehicles were specifically designed with these batteries and for the driving cycles specified by the mission. Simulated operation on the missions yielded the energy consumption (petroleum and/or electricity) over the driving cycles. It was concluded that: in the event that gasoline prices reach $2.50 to $3.00/gal, hybrid vehicles in many applications will become economically competitive with conventional vehicles without subsidization; in some commercial applications hybrid vehicles could be economically competitive, when the gasoline price ranges from $1.20 to $1.50/gal. The cost per kWh per cycle of the advanced batteries is much more important economically than the specific energy; the series hybrid vehicles were found to be more expensive in comparison to the parallel or parallel-flywheel hybrids when designed as passenger vehicles; and hybrid vehicles designed for private use could become economically competitive and displace up to 50% of the fuel normally used on that mission if subsidies of $500 to $2000 were supplied to the owner/operator. (LCL)

  3. Development and use of mathematical models and software frameworks for integrated analysis of agricultural systems and associated water use impacts

    Science.gov (United States)

    Fowler, K. R.; Jenkins, E.W.; Parno, M.; Chrispell, J.C.; Colón, A. I.; Hanson, Randall T.

    2016-01-01

    The development of appropriate water management strategies requires, in part, a methodology for quantifying and evaluating the impact of water policy decisions on regional stakeholders. In this work, we describe the framework we are developing to enhance the body of resources available to policy makers, farmers, and other community members in their e orts to understand, quantify, and assess the often competing objectives water consumers have with respect to usage. The foundation for the framework is the construction of a simulation-based optimization software tool using two existing software packages. In particular, we couple a robust optimization software suite (DAKOTA) with the USGS MF-OWHM water management simulation tool to provide a flexible software environment that will enable the evaluation of one or multiple (possibly competing) user-defined (or stakeholder) objectives. We introduce the individual software components and outline the communication strategy we defined for the coupled development. We present numerical results for case studies related to crop portfolio management with several defined objectives. The objectives are not optimally satisfied for any single user class, demonstrating the capability of the software tool to aid in the evaluation of a variety of competing interests.

  4. Development and Use of Mathematical Models and Software Frameworks for Integrated Analysis of Agricultural Systems and Associated Water Use Impacts

    Directory of Open Access Journals (Sweden)

    J.C. Chrispell

    2016-05-01

    Full Text Available The development of appropriate water management strategies requires, in part, a methodology for quantifying and evaluating the impact of water policy decisions on regional stakeholders. In this work, we describe the framework we are developing to enhance the body of resources available to policy makers, farmers, and other community members in their e orts to understand, quantify, and assess the often competing objectives water consumers have with respect to usage. The foundation for the framework is the construction of a simulation-based optimization software tool using two existing software packages. In particular, we couple a robust optimization software suite (DAKOTA with the USGS MF-OWHM water management simulation tool to provide a flexible software environment that will enable the evaluation of one or multiple (possibly competing user-defined (or stakeholder objectives. We introduce the individual software components and outline the communication strategy we defined for the coupled development. We present numerical results for case studies related to crop portfolio management with several defined objectives. The objectives are not optimally satisfied for any single user class, demonstrating the capability of the software tool to aid in the evaluation of a variety of competing interests.

  5. Stochastic Reachability Analysis of Hybrid Systems

    CERN Document Server

    Bujorianu, Luminita Manuela

    2012-01-01

    Stochastic reachability analysis (SRA) is a method of analyzing the behavior of control systems which mix discrete and continuous dynamics. For probabilistic discrete systems it has been shown to be a practical verification method but for stochastic hybrid systems it can be rather more. As a verification technique SRA can assess the safety and performance of, for example, autonomous systems, robot and aircraft path planning and multi-agent coordination but it can also be used for the adaptive control of such systems. Stochastic Reachability Analysis of Hybrid Systems is a self-contained and accessible introduction to this novel topic in the analysis and development of stochastic hybrid systems. Beginning with the relevant aspects of Markov models and introducing stochastic hybrid systems, the book then moves on to coverage of reachability analysis for stochastic hybrid systems. Following this build up, the core of the text first formally defines the concept of reachability in the stochastic framework and then...

  6. Analysis and Modeling of the Facility Acquisition Process as it Relates to the Development and Deployment of New Weapon Systems.

    Science.gov (United States)

    1985-09-01

    FORCE AIR UNIVERSTYAIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio m - - - am - I 8 6 11 12 10 f AFI T/GEM/LSY/85 a. ANALYSIS AND...Z wH Om UHI- 0 0 " UL 0 EL f z c~t w LHH w 0 EW H WUa:c - EU fW Lum L UfL. 0! < dm00 w am LU Z Z OW! uW L 0r) 04< -m . z. w zH IL 9,4 Appendix B...7gEICPON(593); REVISE PB’S 536 FREEIREQ/1; 537 AlWIT(5)MPROG/11 538 ACT/8,It4FRM(10916)1 MAJCO4 REV. AND PREP. 539; FOR TRASMITTAL TO 540 FREE IPROB/11

  7. INTERACTION ANALYSIS--RECENT DEVELOPMENTS.

    Science.gov (United States)

    AMIDON, EDMUND

    MODIFICATION OF FLANDERS' INTERACTION ANALYSIS IS PROPOSED TO ENCOMPASS SOME FEATURES OF RELATED SYSTEMS AND TO PROVIDE A SPECIFIC FEEDBACK TOOL FOR ANALYZING ONE'S OWN TEACHING, FORMULATING QUESTIONS, OBSERVING TEACHING PATTERNS, DIAGNOSING TEACHING PROBLEMS, AND FOR ROLE-PLAYING IN THE COLLEGE CLASSROOM. FLANDERS' 10 CATEGORIES ARE DIVIDED INTO…

  8. Unpacking Big Systems -- Natural Language Processing Meets Network Analysis. A Study of Smart Grid Development in Denmark

    DEFF Research Database (Denmark)

    Jurowetzki, Roman

    Studies within the detection of technological trajectories and technology forecasting tend traditionally to rely on patent or bibliometric data. The main drawback of these invention-focused approaches is their inability to account for many mainly non-technical factors related to the social...... structure and to some extent quantify unstructured text data. The utilized filtered corpora consist of two types of Danish text-documents: 99 R&DD project descriptions and 574 (initially before filtering 813) non-academic/industrial journal publications dealing with the development of the smart energy grid...... in Denmark. Results show that in the explored case it is not mainly new technologies and applications that are driving change but innovative re-combinations of old and new technologies....

  9. Deployment of hydrogen supply chain for fuel market in 2050: Design and development of a decision support system for scenarios analysis

    International Nuclear Information System (INIS)

    Patay, E.

    2008-07-01

    The deployment of a market for hydrogen energy is a new problem, considered by governments, industrialists and scientists to meet global targets of greenhouse gases emissions reduction and to ensure security in energy supply. In this context, the optimization problem of scheduling the deployment until 2050 of the hydrogen supply chain for fuel market throughout a country has been the object of our study. We get support of Air Liquide Company, his experience and experts in production and distribution of industrial hydrogen, to build an approach to the problem meeting the requirements of an industrial context. After defining and characterizing the optimization problem through a systemic analysis of the distribution infrastructure, we proposed a method suited to its resolution. Monte Carlo simulations enabled us to develop cost functions. Then we developed a heuristic algorithm for approximate optimization of these cost functions. Our approach has necessitated the definition of simulation rules, a design of experiment and a regression method, as well as a heuristic algorithm adapted to the structure of the problem. The specification, development and use of software tools have helped to validate the chosen methodology for the optimization of the uncertain problem of our study. The scenario of evolution has created a reference to validate the model and provide some analysis for early studies of deployment. (author)

  10. Drainage information analysis and mapping system.

    Science.gov (United States)

    2012-10-01

    The primary objective of this research is to develop a Drainage Information Analysis and Mapping System (DIAMS), with online inspection : data submission, which will comply with the necessary requirements, mandated by both the Governmental Accounting...

  11. Risk and safety analysis of nuclear systems

    National Research Council Canada - National Science Library

    Lee, John C; McCormick, Norman J

    2011-01-01

    .... The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used...

  12. Sandia Laboratories technical capabilities: systems analysis

    International Nuclear Information System (INIS)

    Lundergan, C.D.

    1975-06-01

    The systems analysis capabilities at Sandia Laboratories are summarized. Selected applications of these capabilities are presented to illustrate the extent to which they can be applied in research and development programs. (U.S.)

  13. Structural Analysis of Communication Development.

    Science.gov (United States)

    Conville, Richard L.

    This paper discusses the question of the legitimacy of applying structural analysis to actual human behavior and illustrates its legitimacy by using the reasoning in an essay by Paul Ricoeur. It then asks if the principles of communication development (obliqueness, exchange, and dying) derived from Helen Keller's experience of communication…

  14. Multicriteria analysis using open-source data and software for the implementation of a centralized biomedical waste management system in a developing country (Guinea, Conakry).

    Science.gov (United States)

    Pérez Peña, José Vicente; Baldó, Mane; Acosta, Yarci; Verschueren, Laurent; Thibaud, Kenmognie; Bilivogui, Pépé; Jean-Paul Ngandu, Alain; Beavogui, Maoro

    2017-04-01

    In the last decade the increasing interest for public health has promoted specific regulations for the transport, storage, transformation and/or elimination of potentially toxic waste. A special concern should focus on the effective management of biomedical waste, due to the environmental and health risk associated with them. The first stage for the effective management these waste includes the selection of the best sites for the location of facilities for its storage and/or elimination. Best-site selection is accomplished by means of multi-criteria decision analyses (MCDA) that aim to minimize the social and environmental impact, and to maximize management efficiency. In this work we presented a methodology that uses open-source software and data to analyze the best location for the implantation of a centralized waste management system in a developing country (Guinea, Conakry). We applied an analytical hierarchy process (AHP) using different thematic layers such as land use (derived from up-to-date Sentinel 2 remote sensing images), soil type, distance and type of roads, hydrography, distance to dense populated areas, etc. Land-use data were derived from up-to-date Sentinel 2 remote sensing images, whereas roads and hydrography were obtained from the Open Street Map database and latter validated with administrative data. We performed the AHP analysis with the aid of QGIS open-software Geospatial Information System. This methodology is very effective for developing countries as it uses open-source software and data for the MCDA analysis, thus reducing costs in these first stages of the integrated analysis.

  15. Systems analysis made simple computerbooks

    CERN Document Server

    Antill, Lyn

    1980-01-01

    Systems Analysis: Made Simple Computerbooks introduces the essential elements of information systems analysis and design and teaches basic technical skills required for the tasks involved. The book covers the aspects to the design of an information system; information systems and the organization, including the types of information processing activity and computer-based information systems; the role of the systems analyst; and the human activity system. The text also discusses information modeling, socio-technical design, man-machine interface, and the database design. Software specification

  16. Select PC/windows flat to develop data acquisition system

    International Nuclear Information System (INIS)

    Zhang Jin

    1993-01-01

    Through needing analysis, and also, considering user's ability of payment, the characteristic of China computer market, the computer developing tending, and the system's compatibility and up grade capability, PC/Windows flat are selected to develop a data acquisition system

  17. Systems Engineering Analysis for Office Space Management

    Science.gov (United States)

    2017-09-01

    behavioral decision research CAE component acquisition executive CFL core function lead CFSP Core Function Support Plan DA decision analysis DAE...are more effective than less personnel. C. REQUIREMENTS ANALYSIS The systems engineering method applied to LAAFB is based on Kossiakoff’s (2011...program’s commitments support them. The systems engineering method was applied with an emphasis on requirements analysis to develop clear objectives for an

  18. On-stream analysis systems

    International Nuclear Information System (INIS)

    Howarth, W.J.; Watt, J.S.

    1982-01-01

    An outline of some commercially available on-stream analysis systems in given. Systems based on x-ray tube/crystal spectrometers, scintillation detectors, proportional detectors and solid-state detectors are discussed

  19. Development of integrated analytical data management system

    International Nuclear Information System (INIS)

    Onishi, Koichi; Wachi, Isamu; Hiroki, Toshio

    1986-01-01

    The Analysis Subsection of Technical Service Section, Tokai Reprocessing Plant, Tokai Works, is engaged in analysis activities required for the management of processes and measurements in the plant. Currently, it has been desired to increase the reliability of analytical data and to perform analyses more rapidly to cope with the increasing number of analysis works. To meet this end, on-line data processing has been promoted and advanced analytical equipment has been introduced in order to enhance automization. In the present study, an integrated analytical data mangement system is developed which serves for improvement of reliability of analytical data as well as for rapid retrieval and automatic compilation of these data. Fabrication of a basic model of the system has been nearly completed and test operation has already been started. In selecting hardware to be used, examinations were made on easiness of system extension, Japanese language processing function for improving man-machine interface, large-capacity auxiliary memory system, and data base processing function. The existing analysis works wer reviewed in establishing the basic design of the system. According to this basic design, the system can perform such works as analysis of application slips received from clients as well as recording, sending, filing and retrieval of analysis results. (Nogami, K.)

  20. SCADA system analysis

    International Nuclear Information System (INIS)

    Tuneski, Atanasko; Zaev, Emil

    2000-01-01

    This paper reviews one SCADA (Supervisory Control And Data Acquisition) system and its components. The SCADA system is used to monitor and to control a plant or an equipment. Basically the SCADA system is composed of the following: Field Instrumentation, Remote Stations, Communications Stations, Central Monitoring Station. This paper gives the answer where to use the SCADA, description of all its components and functionality. Since the SCADA is usually used for automatic control of a plant or an equipment, a system which is controlled becomes more productive and easy to work with. (Author)

  1. THE IMPORTANCE OF INFORMATION IN SUPERIOR GRADUATING INSTITUTES WEBSITES, IN THE MATRIX CURRICULUM AND PROFESSIONAL PROFILE OF SYSTEMS ANALYSIS AND DEVELOPMENT COURSES

    Directory of Open Access Journals (Sweden)

    José Carlos Mariano do Carmo

    2018-04-01

    Full Text Available Introduction: the existing information in the technological graduation course official web pages need to be clear and objective, in order to ease up the access to programmatic contents, workload, integration and other necessary knowledge so that the students have discernment in their formation choice. Objective: to analyze the curriculum matrix and professional profile in the superior courses in Systems Analysis and Development in the Metropolitan Region of Florianópolis - Santa Catarina, considering the microregion of Grande Florianópolis, composed by nine counties: Florianópolis, São José, Palhoça, Biguaçu, Santo Amaro da Imperatriz, Governador Celso Ramos, Antônio Carlos, Águas Mornas and São Pedro de Alcântara. Methodology: we have performed a qualitative research on the pointed issue, relating it to the current legislation and some of the proposed theories. The research documentally based as it focused on the topics mentioned by the Superior Graduation Institutions in their virtual course environment. It was also used semistructured interviews by phone contact and even visiting when necessary, including searches in the Education Ministry web site to base the study, the curriculum matrix comparison and the course professional profile. Results: results show that the analyzed courses are focused in the job market demands in the studied region, regarding the desktop, web and mobile development solutions using programming languages. The formation professional profile also involves knowledge about logical reasoning, abstract math and learning of a second language. Conclusions: to show to interested students in joining the Systems Analysis and Development course, about the importance of the disciplines approached, utilized technologies, professional profiles and the main educational characteristics offered by the institutions. It is thus intended to contribute that these information are used for the purpose of qualification for the job

  2. Exploring the Obstacles to Implementing Economic Mechanisms to Stimulate Antibiotic Research and Development: A Multi-Actor and System-Level Analysis.

    Science.gov (United States)

    Baraldi, Enrico; Ciabuschi, Francesco; Leach, Ross; Morel, Chantal M; Waluszewski, Alexandra

    2016-05-01

    This Article examines the potential stakeholder-related obstacles hindering the implementation of mechanisms to re-ignite the development of novel antibiotics. Proposed economic models and incentives to drive such development include: Public Funding of Research and Development ("R&D"), Tax Incentives, Milestone Prizes, End Payments, Intellectual Property ("IP") and Exclusivity Extensions, Pricing and Reimbursement Incentives, Product Development Partnerships ("PDPs"), and the Options Market for Antibiotics model. Drawing on personal experience and understanding of the antibiotic field, as well as stakeholder consultation and numerous expert meetings within the DRIVE-AB project and Uppsala Health Summit 2015, the Authors identify obstacles attributable to the following actors: Universities and Research Institutes, Small and Medium-sized Enterprises ("SMEs"), Large Pharmaceutical Companies, Marketing Approval Regulators, Payors, Healthcare Providers, National Healthcare Authorities, Patients, and Supranational Institutions. The analysis also proposes a characterization and ranking of the difficulty associated with implementing the reviewed mechanisms. Public Funding of R&D, Pricing and Reimbursement Incentives, and PDPs are mechanisms expected to meet highly systemic barriers (i.e., obstacles across the entire antibiotic value chain), imposing greater implementation challenges in that they require convincing and involving several motivationally diverse actors in order to have much effect.

  3. 'RECASS'. Radioecological analysis support system

    International Nuclear Information System (INIS)

    Shershakov, V.

    1998-01-01

    The RECASS is developed as a computer system designed for radiation monitoring and decision-making support in a nuclear emergency. The RECASS system has excellent capabilities for collecting, storing, and presenting data from the radiological situation of contaminated areas. It is well designed for modeling radionuclide migration in the environmental media and for assessing countermeasures in terms of doses received by population groups as a result of radioactive contamination. For RECASS to be used as a basis for solving the problems of radioecological analysis, it is essential that mapping facilities are provided and that scaling capabilities allow data to be presented with the necessary degree of detail and accuracy. Because of the on-line links with the operating network of radiological monitoring, RECASS is capable of collecting meteorological and radiological data from across the country and storing this information in its databases. The availability of data from the network of radiological monitoring makes it possible to develop RECASS as a real-time emergency response system. (R.P.)

  4. Cross-impacts analysis development and energy policy analysis applications

    Energy Technology Data Exchange (ETDEWEB)

    Roop, J.M.; Scheer, R.M.; Stacey, G.S.

    1986-12-01

    Purpose of this report is to describe the cross-impact analysis process and microcomputer software developed for the Office of Policy, Planning, and Analysis (PPA) of DOE. First introduced in 1968, cross-impact analysis is a technique that produces scenarios of future conditions and possibilities. Cross-impact analysis has several unique attributes that make it a tool worth examining, especially in the current climate when the outlook for the economy and several of the key energy markets is uncertain. Cross-impact analysis complements the econometric, engineering, systems dynamics, or trend approaches already in use at DOE. Cross-impact analysis produces self-consistent scenarios in the broadest sense and can include interaction between the economy, technology, society and the environment. Energy policy analyses that couple broad scenarios of the future with detailed forecasting can produce more powerful results than scenario analysis or forecasts can produce alone.

  5. Chemical laser systems analysis

    Energy Technology Data Exchange (ETDEWEB)

    Doughty, J.R.

    1988-11-01

    This paper presents a means by which the chemical laser device weight can be minimized with respect to its performance and the device power minimized with respect to the target range. Chemical laser performance parameters such as the specific power and nozzle power flux are then used in conjunction with weight and propagation models to determine system effectiveness. A measure of merit is given by which systems can be contrasted. An illustrative example is included in which DF and Iodine laser systems are compared for an airborne scenario. 14 references.

  6. The Development of Gamma Irradiator Control System

    International Nuclear Information System (INIS)

    Mohd Zaid Hassan; Anwar Abdul Rahman; Azraf Azman; Mohd Rizal Mamat

    2015-01-01

    This paper presents the preliminary software development for the Gamma irradiator control system using commercial supervisory control and data acquisition (SCADA) software. The radiation dose analysis is the study of the relationship between the initial loading source activity (Curie) and concurrent activity in order to perform the irradiation process. The concurrent source activity calculation model is presented. The Human machine interface (HMI) has been developed by using Indusoft Web Studio to solve the mathematical calculation, task and process overview. (author)

  7. Evaluation of stresses developed in different bracket-cement-enamel systems using finite element analysis with in vitro bond strength tests.

    Science.gov (United States)

    Elsaka, Shaymaa E; Hammad, Shaza M; Ibrahim, Noha F

    2014-04-16

    The purpose of this study was to determine the bond strength of different orthodontic bracket materials (ceramic, stainless steel, and titanium) as well as stresses developed in bracket-cement-enamel systems using finite element (FE) analysis. One hundred and thirty-five extracted human caries-free upper central incisors were divided into three groups (n = 45/group) according to the type of orthodontic bracket materials (stainless steel, ceramic, and titanium). Each group was further subdivided into three subgroups (n = 15/group) according to the bond strength test loading mode (shear short side, shear long side, and tensile). After debonding, the fractured specimen was examined, and the adhesive remnant index (ARI) was determined. FE analysis models analyzed the stress distribution within the cement and enamel. Bond strengths were analyzed using ANOVA and Tukey's test, and the ARI scores were analyzed using chi-square (χ2) test. Shear loading at the short side of the bracket resulted in the highest bond strength and lowest maximum principal stress both on cement and enamel compared with the other loading modes (P strength and lower maximum principal stress than metallic brackets (P strength and stresses developed both on cement and enamel.

  8. Prognostication of regional energy system development

    Directory of Open Access Journals (Sweden)

    Grigoriy Borisovich Korovin

    2011-06-01

    Full Text Available This paper analyzes practice and development of new methodological approaches to forecasting the development of regional energy systems. It is shown that the energy complex is involved in a variety of forward and backward linkages as an element of socio-economic systems, and the quality and availability of energy resources largely determines the structure and pace of economic, social and environmental development of the region. Analysis of existing current practice of territorial and sectoral forecasting implemented in Russia and abroad, suggests that such practice is inadequate in its theoretical and methodological elaboration. This is confirmed by the frequent discrepancy between actual results and plans, as well as their regular revision. The methods are mostly based on extrapolation of existing tendencies and not taking into account many factors and emerging trends related to the complexity and openness of the social and economic systems. Post-industrial level of civilization is characterized by fast development of technology; knowledge, information, technological and institutional innovation become the main resources. The greatest importance is attached to such development properties as instability, various orderliness, nonlinearity, interactions etc. Current approaches to forecasting the future are described by a number of theories that are generally called self-organization theory, taking into account these singularities. These concepts should be included in the theoretical basis for the development and implementation of regional development forecasts. Using the synergetic approach assumes that, along with organizational processes, processes of self-organization and self-development are very important in the system, they are characterized by spontaneous, unexpected formations and emerging structures. The development of such systems can generate stable and efficient new structure. The presence of crisis is an integral feature of complex

  9. Trajectory of Sewerage System Development Optimization

    Science.gov (United States)

    Chupin, R. V.; Mayzel, I. V.; Chupin, V. R.

    2017-11-01

    The transition to market relations has determined a new technology for our country to manage the development of urban engineering systems. This technology has shifted to the municipal level and it can, in large, be presented in two stages. The first is the development of a scheme for the development of the water supply and sanitation system, the second is the implementation of this scheme on the basis of investment programs of utilities. In the investment programs, financial support is provided for the development and reconstruction of water disposal systems due to the investment component in the tariff, connection fees for newly commissioned capital construction projects and targeted financing for selected state and municipal programs, loans and credits. Financial provision with the development of sewerage systems becomes limited and the problem arises in their rational distribution between the construction of new water disposal facilities and the reconstruction of existing ones. The paper suggests a methodology for developing options for the development of sewerage systems, selecting the best of them by the life cycle cost criterion, taking into account the limited investments in their construction, models and methods of analysis, optimizing their reconstruction and development, taking into account reliability and seismic resistance.

  10. Energy Usage Analysis System

    Data.gov (United States)

    General Services Administration — The EUAS application is a web based system which serves Energy Center of Expertise, under the Office of Facilitates Management and Service Programs. EUAS is used for...

  11. Two energy system analysis - cases

    DEFF Research Database (Denmark)

    Lund, Henrik; Antonoff, Jayson; Andersen, Anders N.

    2004-01-01

    The chapter presents tow cases of energy system analysis, illustrating the types of tools and methodologies presently being used for these studies in Denamrk and elsewhere.......The chapter presents tow cases of energy system analysis, illustrating the types of tools and methodologies presently being used for these studies in Denamrk and elsewhere....

  12. Development of a General-Purpose Analysis System Based on a Programmable Fluid Processor Final Report CRADA No. TC-2027-01

    Energy Technology Data Exchange (ETDEWEB)

    McConaghy, C. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gascoyne, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-28

    The purpose ofthis project was to develop a general-purpose analysis system based on a programmable fluid processor (PFP). The PFP is an array of electrodes surrounded by fluid reservoirs and injectors. Injected droplets of various reagents are manjpulated and combined on the array by Dielectrophoretic (DEP) forces. The goal was to create a small handheld device that could accomplish the tasks currently undertaken by much larger, time consuming, manual manipulation in the lab. The entire effo1t was funded by DARPA under the Bio-Flips program. MD Anderson Cancer Center was the PI for the DARPA effort. The Bio-Flips program was a 3- year program that ran from September 2000 to September 2003. The CRADA was somewhat behind the Bi-Flips program running from June 2001 to June 2004 with a no cost extension to September 2004.

  13. Development of a Twin-Spool Turbofan Engine Simulation Using the Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS)

    Science.gov (United States)

    Zinnecker, Alicia M.; Chapman, Jeffryes W.; Lavelle, Thomas M.; Litt, Jonathan S.

    2014-01-01

    The Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS) is a tool that has been developed to allow a user to build custom models of systems governed by thermodynamic principles using a template to model each basic process. Validation of this tool in an engine model application was performed through reconstruction of the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) (v2) using the building blocks from the T-MATS (v1) library. In order to match the two engine models, it was necessary to address differences in several assumptions made in the two modeling approaches. After these modifications were made, validation of the engine model continued by integrating both a steady-state and dynamic iterative solver with the engine plant and comparing results from steady-state and transient simulation of the T-MATS and C-MAPSS models. The results show that the T-MATS engine model was accurate within 3% of the C-MAPSS model, with inaccuracy attributed to the increased dimension of the iterative solver solution space required by the engine model constructed using the T-MATS library. This demonstrates that, given an understanding of the modeling assumptions made in T-MATS and a baseline model, the T-MATS tool provides a viable option for constructing a computational model of a twin-spool turbofan engine that may be used in simulation studies.

  14. Development of a Twin-spool Turbofan Engine Simulation Using the Toolbox for Modeling and Analysis of Thermodynamic Systems (T-MATS)

    Science.gov (United States)

    Zinnecker, Alicia M.; Chapman, Jeffryes W.; Lavelle, Thomas M.; Litt, Johathan S.

    2014-01-01

    The Toolbox for Modeling and Analysis of Thermodynamic Systems (T-MATS) is a tool that has been developed to allow a user to build custom models of systems governed by thermodynamic principles using a template to model each basic process. Validation of this tool in an engine model application was performed through reconstruction of the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) (v2) using the building blocks from the T-MATS (v1) library. In order to match the two engine models, it was necessary to address differences in several assumptions made in the two modeling approaches. After these modifications were made, validation of the engine model continued by integrating both a steady-state and dynamic iterative solver with the engine plant and comparing results from steady-state and transient simulation of the T-MATS and C-MAPSS models. The results show that the T-MATS engine model was accurate within 3 of the C-MAPSS model, with inaccuracy attributed to the increased dimension of the iterative solver solution space required by the engine model constructed using the T-MATS library. This demonstrates that, given an understanding of the modeling assumptions made in T-MATS and a baseline model, the T-MATS tool provides a viable option for constructing a computational model of a twin-spool turbofan engine that may be used in simulation studies.

  15. Analysis of Cryptocurrencies Price Development

    OpenAIRE

    Jan Lansky

    2016-01-01

    Cryptocurrencies are a type of digital currencies based on cryptography principles. Cryptocurrencies are a unique combination of three characteristics: they provide anonymity, they are independent of central authority and they provide protection from double spending attack. The aim of this paper is to capture trends in the area of significant cryptocurrencies price developments and to explain their causes. The current research in this area is exclusively limited to an analysis of the price de...

  16. Development of neutron activation analysis software

    International Nuclear Information System (INIS)

    Wang Liyu

    1987-10-01

    The software for quantitative neutron activation analysis was developed to run under the MS/DOS operating system. The programmes of the IBM/SPAN include: spectra file transfer from and to a Canberra Series 35 multichannel analyzer, spectrum evaluation routines, calibration subprogrammes, and quantitative analysis. The programmes for spectrum analysis include fitting routine for separation of multiple lines by reproducing the peak shape with a combination of Gaussian and exponential terms. The programmes were tested on an IBM/AT-compatible computer. The programmes and the sources are available costfree for the IAEA projects of Technical Cooperation. 7 refs, 3 figs

  17. ANALISIS SISTEM USAHATANI TERPADU DI LAHAN PASANG SURUT UNTUK MENDUKUNG PENGEMBANGAN AGROINDUSTRI WILAYAH (An Analysis Integrated Farming System in Tidal Swamp Land to Support Regional Agroindustrial Development

    Directory of Open Access Journals (Sweden)

    Rustan Massinai

    2013-11-01

    Full Text Available Integrated farming system was directed to the efforts to lengthen biological cycle by optimizing the use of agriculture and livestock by-products. Each chain of cycle resulted a new product that has high economic value, so this system was expected to optimize the empowerment and use of marginal land in all regions. The objective of this research was to analyze integrated farming system in tidal swamp land to support agroindustry development in Pulang Pisau Regency of Central Kalimantan Province. This research was done with survey and interview method in Pulang Pisau Regency of Central Kalimantan Province. Primary data was collected from May 2011 to December 2011. The results showed that the management of agro-based enterprises integrated farming (rice, coffee and cattle obtained by the BC Ratio = 1.09, (greater than 1, IRR = 16,7% greater than the rate bank interest rate (12% and NPV values obtained for Rp 37,349,080 is positive (+, then the utilization of integrated agro-based farming in tidal land eligible to be developed. Agro-industry development opportunities based integrated farming in tidal land in the future have a chance to be applied in other areas, it can anticipate the growing number of people who have added each year. Keywords: Integrated farming system analysis, tidal swamp land, agroindustry   ABSTRAK Sistem pertanian terpadu diarahkan pada upaya memperpanjang siklus biologis dengan mengoptimalkan pemanfaatan hasil samping pertanian dan peternakan. Setiap mata rantai siklus menghasilkan produk baru yang memiliki nilai ekonomis tinggi, sehingga dengan sistem ini diharapkan pemberdayaan dan pemanfaatan lahan marginal di seluruh daerah dapat lebih dioptimalkan. Penelitian ini bertujuan untuk menganalisis sistem usahatani terpadu (Integrated Farming System di lahan pasang surut untuk mendukung pengembangan agroindustri di Kabupaten Pulang Pisau Provinsi Kalimantan Tengah. Penelitian ini dilaksanakan dengan metode survei dan wawancara

  18. Rietveld analysis system RIETAN (translation)

    International Nuclear Information System (INIS)

    Izumi, Fujio

    1991-09-01

    This is the manual of the RIETAN system (a Rietveld analysis program) which is originally written in Japanese by Fujio Izumi. The manual consists of two parts. Part I is a general description of the fundamental concepts and methods of the RIETAN system. Part II is the user's manual of the RIETAN which mainly describes in detail how to create user's data sets, procedures of Rietveld analysis and how to read the results of analysis. (author)

  19. Development of teleoperated cleanup system

    International Nuclear Information System (INIS)

    Kim, Ki Ho; Park, J. J.; Yang, M. S.; Kwon, H. J.

    2005-01-01

    This report describes the development of a teleoperated cleanup system for use in a highly radioactive environment of DFDF(DUPIC Fuel Demonstration Facility) at KAERI where direct human access to the in-cell is strictly limited. The teleoperated cleanup system was designed to remotely remove contaminants placed or fixed on the floor surface of the hot-cell by mopping them with wet cloth. This cleanup system consists of a mopping slave, a mopping master and a control console. The mopping slave located at the in-cell comprises a mopping tool with a mopping cloth and a mobile platform, which were constructed in modules to facilitate maintenance. The mopping master that is an input device to control the mopping slave has kinematic dissimilarity with the mopping slave. The control console provides a means of bilateral control flows and communications between the mopping master and the mopping slave. In operation, the human operator from the out-of-cell performs a series of decontamination tasks remotely by manipulating the mopping slave located in-cell via a mopping master, having a sense of real mopping. The environmental and mechanical design considerations, and control systems of the developed teleoperated cleanup system are also described

  20. Networking systems design and development

    CERN Document Server

    Chao, Lee

    2009-01-01

    Effectively integrating theory and hands-on practice, Networking Systems Design and Development provides students and IT professionals with the knowledge and skills needed to design, implement, and manage fully functioning network systems using readily available Linux networking tools. Recognizing that most students are beginners in the field of networking, the text provides step-by-step instruction for setting up a virtual lab environment at home. Grounded in real-world applications, this book provides the ideal blend of conceptual instruction and lab work to give students and IT professional

  1. Automated information retrieval system for radioactivation analysis

    International Nuclear Information System (INIS)

    Lambrev, V.G.; Bochkov, P.E.; Gorokhov, S.A.; Nekrasov, V.V.; Tolstikova, L.I.

    1981-01-01

    An automated information retrieval system for radioactivation analysis has been developed. An ES-1022 computer and a problem-oriented software ''The description information search system'' were used for the purpose. Main aspects and sources of forming the system information fund, characteristics of the information retrieval language of the system are reported and examples of question-answer dialogue are given. Two modes can be used: selective information distribution and retrospective search [ru

  2. Data Systems Task Analysis.

    Science.gov (United States)

    1979-08-01

    QUALITY CCNTROL SUPERVISOR/NCOIC 369. PROGRAMMER 07?. PROGRAMMER ANALYST C7l, PROGRAMMING/ANALYSIS SUPERVISCR 󈨌. UALITY CONTROL PETTY OFFICER/CLERK...CLASSIFICATION OF THE FACILITY OR SITE THAT YOU ARE PRESENTLY WORKING IN? 01. CDPA (CENTRAL DESIGN PROGRAMMING ACTIVITY) 02. RASC (REGIONAL AUTOMATED...CARDS MANUALLY I)9. COORDINATE WITH CfFICES CF PFIMARY RESPONSIBILITY (OPR) ON NEW OR REVISED REPORTING REQUIREMENTS 115. DETERMINE ALTERNATE METHODS

  3. A Comparative Analysis of Cockpit Display Development Tools

    National Research Council Canada - National Science Library

    Gebhardt, Matthew

    2000-01-01

    ..., Virtual Application Prototyping System (VAPS) and Display Editor. The comparison exploits the analysis framework establishing the advantages and disadvantages of the three software development suites...

  4. Arctic Climate Systems Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ivey, Mark D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Robinson, David G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Boslough, Mark B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Backus, George A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Peterson, Kara J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); van Bloemen Waanders, Bart G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Swiler, Laura Painton [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Desilets, Darin Maurice [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reinert, Rhonda Karen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    This study began with a challenge from program area managers at Sandia National Laboratories to technical staff in the energy, climate, and infrastructure security areas: apply a systems-level perspective to existing science and technology program areas in order to determine technology gaps, identify new technical capabilities at Sandia that could be applied to these areas, and identify opportunities for innovation. The Arctic was selected as one of these areas for systems level analyses, and this report documents the results. In this study, an emphasis was placed on the arctic atmosphere since Sandia has been active in atmospheric research in the Arctic since 1997. This study begins with a discussion of the challenges and benefits of analyzing the Arctic as a system. It goes on to discuss current and future needs of the defense, scientific, energy, and intelligence communities for more comprehensive data products related to the Arctic; assess the current state of atmospheric measurement resources available for the Arctic; and explain how the capabilities at Sandia National Laboratories can be used to address the identified technological, data, and modeling needs of the defense, scientific, energy, and intelligence communities for Arctic support.

  5. Substitution dynamical systems spectral analysis

    CERN Document Server

    Queffélec, Martine

    2010-01-01

    This volume mainly deals with the dynamics of finitely valued sequences, and more specifically, of sequences generated by substitutions and automata. Those sequences demonstrate fairly simple combinatorical and arithmetical properties and naturally appear in various domains. As the title suggests, the aim of the initial version of this book was the spectral study of the associated dynamical systems: the first chapters consisted in a detailed introduction to the mathematical notions involved, and the description of the spectral invariants followed in the closing chapters. This approach, combined with new material added to the new edition, results in a nearly self-contained book on the subject. New tools - which have also proven helpful in other contexts - had to be developed for this study. Moreover, its findings can be concretely applied, the method providing an algorithm to exhibit the spectral measures and the spectral multiplicity, as is demonstrated in several examples. Beyond this advanced analysis, many...

  6. Primer: Using Watershed Modeling System (WMS) for Gridded Surface Subsurface Hydrologic Analysis (GSSHA) Data Development - WMS 6.1 and GSSHA 1.43C

    National Research Council Canada - National Science Library

    Downer, Charles

    2003-01-01

    This document is a primer for use of the Watershed Modeling System (WMS) interface with the physically based, distributed-parameter hydrologic model Gridded Surface Subsurface Hydrologic Analysis (GSSHA...

  7. Development of pipe layout system

    International Nuclear Information System (INIS)

    Ota, Yoshimi; Yamamoto, Shigeru; Tokumasu, Shinji; Yamaguchi, Yukio; Besho, Hiromi; Sakano, Tatuo.

    1986-01-01

    In the plant design carried out so far, the process up to final drawings has been the repetition of the correction of drawings. This is because the space as the object of design is finite, and it is difficult to lay many pipes efficiently. Especially in nuclear power plants, the quantity of materials required for ensuring the safety and quality control is enormous, and only the skilled engineers having rich experience have become unable to deal with it. The model engineering using plastic models has been adopted, but still there are problems. In order to solve this problem, the development of the system for unitarily managing the various design information of plants with a computer, checking up various design with this information, automatically outputting design drawings and management data, and heightening the quality of design, synchronizing the progress, increasing the speed and saving the labor of design was carried out. This system is versatile and can be used for all plants. The emphasis in the development was placed on compact data structure, rapid picture processing and easy operation. The present status of design and the automation, the basic design of the system, the function of the system, the internal expression of models, the method of picture processing, and the results of application are reported. (Kako, I.)

  8. Development of design window evaluation and display system. 1. System development and performance confirmation

    International Nuclear Information System (INIS)

    Muramatsu, Toshiharu; Yamaguchi, Akira

    2003-07-01

    Purpose: The work was performed to develop a design window evaluation and display system for the purpose of obtaining the effects of various design parameters on the typical thermal hydraulic issues resulting from a use of various kind of working fluid etc. easily. Method: The function of the system were 'confirmation of design margin' of the present design, 'confirmation of the affected design zone' when a designer changed some design parameter, and search for an design improvement' for design optimization. The system was developed using existing soft wares on PC and the database relating analytical results of typical thermal hydraulic issues provided by separate work. Results: (1) System design: In order to develop a design window evaluation and display system, 'numerical analysis unit', 'statistical analysis unit', 'MMI unit', 'optimization unit' were designed based on the result of selected optimization procedure and display visualization. Further, total system design was performed combining these units. Typical thermal hydraulic issues to be considered are upper plenum thermal hydraulics, thermal stratification, free surface sloshing, flow-induced vibration of a heat exchanger and thermal striping in the T-junction piping systems. (2) Development of prototype system and a functional check: A prototype system of a design window evaluation and display system was developed and the functions were confirmed as was planned. (author)

  9. Development of logistics information systems

    Directory of Open Access Journals (Sweden)

    Milan Ž. Dronjak

    2012-10-01

    -Army (Global Combat Support System-Army Field/Tactical, is intended for the tactical level and it will replace 14 tactical logistics information systems and connect them with the rest of the information environment. Tendencies in the development of logistics information systems In line with the presented information solutions, it is possible to extract relevant conclusions about tendencies in the development of these types of systems all around the world. These conclusions should be implemented, through adequate principles, into domestic software development. Three main tendencies are visible in modern solutions: using centralised databases, integration of existing separated software solutions, and connecting previously autonomus systems. Conclusion In accordance with present time requirements, logistic support should be realised as close as possible to the origin of a logistic need, in real time and adequately. Information systems enable real time delivery of information needed for a quality logistic support in all phases of operations as well as for a faster generation of all types of documents.

  10. Hydrologic Engineering Center River Analysis System (HEC-RAS) Water Temperature Models Developed for the Missouri River Recovery Management Plan and Environmental Impact Statement

    Science.gov (United States)

    2017-09-18

    ER D C/ EL T R- 17 -1 8 Missouri River Recovery Program (MRRP) Hydrologic Engineering Center-River Analysis System (HEC-RAS) Water...library at http://acwc.sdp.sirsi.net/client/default. Missouri River Recovery Program (MRRP) ERDC/EL TR-17-18 September 2017 Hydrologic ...Impact Statement” ERDC/EL TR-17-18 ii Abstract This report describes the Hydrologic Engineering Center-River Analysis System (HEC-RAS) water

  11. Probabilistic sensitivity analysis of biochemical reaction systems.

    Science.gov (United States)

    Zhang, Hong-Xuan; Dempsey, William P; Goutsias, John

    2009-09-07

    Sensitivity analysis is an indispensable tool for studying the robustness and fragility properties of biochemical reaction systems as well as for designing optimal approaches for selective perturbation and intervention. Deterministic sensitivity analysis techniques, using derivatives of the system response, have been extensively used in the literature. However, these techniques suffer from several drawbacks, which must be carefully considered before using them in problems of systems biology. We develop here a probabilistic approach to sensitivity analysis of biochemical reaction systems. The proposed technique employs a biophysically derived model for parameter fluctuations and, by using a recently suggested variance-based approach to sensitivity analysis [Saltelli et al., Chem. Rev. (Washington, D.C.) 105, 2811 (2005)], it leads to a powerful sensitivity analysis methodology for biochemical reaction systems. The approach presented in this paper addresses many problems associated with derivative-based sensitivity analysis techniques. Most importantly, it produces thermodynamically consistent sensitivity analysis results, can easily accommodate appreciable parameter variations, and allows for systematic investigation of high-order interaction effects. By employing a computational model of the mitogen-activated protein kinase signaling cascade, we demonstrate that our approach is well suited for sensitivity analysis of biochemical reaction systems and can produce a wealth of information about the sensitivity properties of such systems. The price to be paid, however, is a substantial increase in computational complexity over derivative-based techniques, which must be effectively addressed in order to make the proposed approach to sensitivity analysis more practical.

  12. ITER Plasma Control System Development

    Science.gov (United States)

    Snipes, Joseph; ITER PCS Design Team

    2015-11-01

    The development of the ITER Plasma Control System (PCS) continues with the preliminary design phase for 1st plasma and early plasma operation in H/He up to Ip = 15 MA in L-mode. The design is being developed through a contract between the ITER Organization and a consortium of plasma control experts from EU and US fusion laboratories, which is expected to be completed in time for a design review at the end of 2016. This design phase concentrates on breakdown including early ECH power and magnetic control of the poloidal field null, plasma current, shape, and position. Basic kinetic control of the heating (ECH, ICH, NBI) and fueling systems is also included. Disruption prediction, mitigation, and maintaining stable operation are also included because of the high magnetic and kinetic stored energy present already for early plasma operation. Support functions for error field topology and equilibrium reconstruction are also required. All of the control functions also must be integrated into an architecture that will be capable of the required complexity of all ITER scenarios. A database is also being developed to collect and manage PCS functional requirements from operational scenarios that were defined in the Conceptual Design with links to proposed event handling strategies and control algorithms for initial basic control functions. A brief status of the PCS development will be presented together with a proposed schedule for design phases up to DT operation.

  13. Interim report on the development and application of environmental mapped data digitization, encoding, analysis, and display software for the ALICE system. Volume II. [MAP, CHAIN, FIX, and DOUT, in FORTRAN IV for PDP-10

    Energy Technology Data Exchange (ETDEWEB)

    Amiot, L.W.; Lima, R.J.; Scholbrock, S.D.; Shelman, C.B.; Wehman, R.H.

    1979-06-01

    Volume I of An Interim Report on the Development and Application of Environmental Mapped Data Digitization, Encoding, Analysis, and Display Software for the ALICE System provided an overall description of the software developed for the ALICE System and presented an example of its application. The scope of the information presented in Volume I was directed both to the users and developers of digitization, encoding, analysis, and display software. Volume II presents information which is directly related to the actual computer code and operational characteristics (keys and subroutines) of the software. Volume II will be of more interest to developers of software than to users of the software. However, developers of software should be aware that the code developed for the ALICE System operates in an environment where much of the peripheral hardware to the PDP-10 is ANL/AMD built. For this reason, portions of the code may have to be modified for implementation on other computer system configurations. 11 tables.

  14. Systems Analysis Department. Annual progress report 1996

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H.; Olsson, C.; Petersen, K.E. [eds.

    1997-03-01

    The report describes the work of the Systems Analysis Department at Risoe National Laboratory during 1996. The department is undertaking research within Simulation and Optimisation of Energy Systems, Energy and Environment in Developing Countries - UNEP Centre, Integrated Environmental and Risk Management and Man/Machine Interaction. The report includes lists of publications, lectures, committees and staff members. (au) 131 refs.

  15. Development of an automated sampling-analysis system for simultaneous measurement of reactive oxygen species (ROS) in gas and particle phases: GAC-ROS

    Science.gov (United States)

    Huang, Wei; Zhang, Yuanxun; Zhang, Yang; Zeng, Limin; Dong, Huabin; Huo, Peng; Fang, Dongqing; Schauer, James J.

    2016-06-01

    A novel online system, GAC-ROS, for simultaneous measurement of reactive oxygen species (ROS) in both gas and particle phases was developed based on 2‧,7‧-dichlorofluorescin (DCFH) assay to provide fast sampling and analysis of atmospheric ROS. The GAC-ROS, composed of a Gas and Aerosol Collector (GAC), a series of reaction and transportation systems, and a fluorescence detector, was tested for instrumental performance in laboratory. Results showed good performance with a favorable R2 value for the calibration curve (above 0.998), high penetration efficiencies of ROS (above 99.5%), and low detection limits (gas-phase ROS: 0.16 nmol H2O2 m-3; particle-phase ROS: 0.12 nmol H2O2 m-3). Laboratorial comparison between online and offline methods for particle-bound ROS showed significant loss of ROS due to the relatively long time off-line treatment. Field observations in Beijing found that concentrations of ROS in winter time were significantly higher than those observed in spring. Only a few weak positive correlations were found between ROS and some air pollutants, which reflects the complexities of ROS generation and transformation in atmosphere. This study was the first to simultaneously obtain concentrations of gas and particle-phase ROS using an online method. Consequently, it provides a powerful tool to characterize the oxidizing capacity of the atmosphere and the sources of the oxidizing capacity.

  16. Development of inspection system for vehicle interior transient noise using non-stationary signal analysis; Hiteijo shingo bunseki wo mochiita sharyo ion hantei system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, H.; Ueda, K. [Mazda Motor Corp., Hiroshima (Japan)

    1997-10-01

    A method to inspect the rattle, one of the transient noises of car interior, is developed. In the method, the waveform data of overall noise are analyzed using Wigner distribution, and its rattle component is condensed and separated from the background excitation noise. Then the rattle component is classified into three levels: strong, middle and none, using the neural network. A fuzzy inference is also used to select regular waveform measurements. Experimental results show that the correct classification ratio of the method is more than 90%, which equals skilled inspection operators in accuracy. 11 refs., 8 figs.

  17. Mechatronic Systems Analysis, Design and Implementation

    CERN Document Server

    Boukas, El-Kébir

    2012-01-01

    This book deals with the analysis, the design and the implementation of the mechatronic systems. Classical and modern tools are developed for the analysis and the design for such systems. Robust control, H-Infinity and guaranteed cost control theory are also used for analysis and design of mechatronic systems. Different controller such as state feedback, static output feedback and dynamic output feedback controllers are used to stabilize mechatronic systems. Heuristic algorithms are provided to solve the design of the classical controller such as PID, phase lead, phase lag and phase lead-lag controllers while linear matrix inequalities (LMI) algorithms are provided for finding solutions to the state feedback, static output feedback and dynamic output feedback controllers. The theory presented in the different chapters of the volume is applied to numerical examples to show the usefulness of the theoretical results. Some case studies are also provided to show how the developed concepts apply for real system. Em...

  18. Software Development for Decision Analysis

    Science.gov (United States)

    1975-03-01

    place vandom variable 1 after decision 3 in the tree. In the nuit phase of our research, we hope to develop general algorithms for translating any...1 5 | > 192 - -■--■ i r«iiii iiml ii MM and tl en defining (GUARANTEE COST)!^ □□BlfSMMiMYTIfS) feöl QF]( GUARANTEE")!^(YES) • The blanching ...Stanford, California, 1974. [4c] Howard, R. A., "Proximal Decision Analysis," Management Science Vol. 17, No. 9, May 1971. a L [5] International

  19. Analysis of Cryptocurrencies Price Development

    Directory of Open Access Journals (Sweden)

    Jan Lansky

    2016-12-01

    Full Text Available Cryptocurrencies are a type of digital currencies based on cryptography principles. Cryptocurrencies are a unique combination of three characteristics: they provide anonymity, they are independent of central authority and they provide protection from double spending attack. The aim of this paper is to capture trends in the area of significant cryptocurrencies price developments and to explain their causes. The current research in this area is exclusively limited to an analysis of the price developments of the most important Bitcoin cryptocurrency; our research is the first to focus on other cryptocurrencies too. The economic perspective on cryptocurrencies is based on IT knowledge regarding the principles of their functioning. We have created a database of prices of 1278 cryptocurrencies from 2013 to 2016. This database is publicly available. To analyse the data, SQL query language was used.

  20. A microarray analysis of gnotobiotic mice indicating that microbial exposure during the neonatal period plays an essential role in immune system development

    Directory of Open Access Journals (Sweden)

    Yamamoto Masahiro

    2012-07-01

    Full Text Available Abstract Background Epidemiological studies have suggested that the encounter with commensal microorganisms during the neonatal period is essential for normal development of the host immune system. Basic research involving gnotobiotic mice has demonstrated that colonization at the age of 5 weeks is too late to reconstitute normal immune function. In this study, we examined the transcriptome profiles of the large intestine (LI, small intestine (SI, liver (LIV, and spleen (SPL of 3 bacterial colonization models—specific pathogen-free mice (SPF, ex-germ-free mice with bacterial reconstitution at the time of delivery (0WexGF, and ex-germ-free mice with bacterial reconstitution at 5 weeks of age (5WexGF—and compared them with those of germ-free (GF mice. Results Hundreds of genes were affected in all tissues in each of the colonized models; however, a gene set enrichment analysis method, MetaGene Profiler (MGP, demonstrated that the specific changes of Gene Ontology (GO categories occurred predominantly in 0WexGF LI, SPF SI, and 5WexGF SPL, respectively. MGP analysis on signal pathways revealed prominent changes in toll-like receptor (TLR- and type 1 interferon (IFN-signaling in LI of 0WexGF and SPF mice, but not 5WexGF mice, while 5WexGF mice showed specific changes in chemokine signaling. RT-PCR analysis of TLR-related genes showed that the expression of interferon regulatory factor 3 (Irf3, a crucial rate-limiting transcription factor in the induction of type 1 IFN, prominently decreased in 0WexGF and SPF mice but not in 5WexGF and GF mice. Conclusion The present study provides important new information regarding the molecular mechanisms of the so-called "hygiene hypothesis".