WorldWideScience

Sample records for syn-anti bacteriochlorophylls form

  1. Synthesis, structures and magnetic properties in 3d-electron-rich isostructural complexes based on chains with sole syn-anti carboxylate bridges.

    Science.gov (United States)

    Su, Feng; Lu, Liping; Feng, Sisi; Zhu, Miaoli; Gao, Zengqiang; Dong, Yuhui

    2015-04-28

    To evaluate magnetic properties of isostructural compounds, a series of 3D carboxylate coordination polymers [M(H2bpta)]n, (H4bpta = 2,2',4,4'-biphenyltetracarboxylic acid, M = Fe(II) (1), Ni(II) (2), Cu(II) (3) and Zn(II) (4)), was synthesized in H2O-CH3CN or H2O solvents, respectively. Structurally, complexes 1-4 have isostructural features with (5,5)-connected 3D framework, wherein the M(II) centre takes an octahedral coordination environment consisting of six oxygen atoms from carboxylates of ligands. The M(II) sites are linked by syn-anti carboxylates to form chains with an M···M separation of 4.880(2) (M = Fe), 4.784(2) (M = Ni), 4.541(2) (M = Cu), and 4.607(2) Å (M = Zn), respectively. The shortest M···M distances between interchains locate 9.122(4), 9.077(3), 9.361(3), and 8.767(2) Å, respectively. Magnetically, the isostructural polymers show different magnetic behaviors due to different spins of central ions. Theoretical analysis indicates that couplings between magnetic ions obey uniform chain models. The magnetic susceptibility of 1 and 2 are perfectly fitted by the modified Fisher model to yield an effective intra-chain exchange coupling constant of -0.81(1) and 3.67(2) cm(-1), respectively. For 3, a Heisenberg ferromagnetic S = 1/2 chain included the intra-chain magnetic exchange interaction (J = 9.28(1) cm(-1), and zj' = -0.068(3) cm(-1)), weak ferromagnetic interactions in intra-chains, and weak antiferromagnetic interactions between interchains. The phenomena of 1-3 accord with the common view that the exchange interaction between two magnetic M(II) ions bridged by the syn-anti carboxylate bridge is dominantly weak ferro- or anti-ferromagnetic interactions. In addition, the M-O-C-O-M spin exchange interactions |J| of M2(CO2)2 (M = Mn(3d(5))(20), Fe(3d(6)), Co(3d(7))(20), Ni(3d(8)), Cu(3d(9))) decrease in strength with Cu2(CO2)2 > Ni2(CO2)2 > Co2(CO2)2 > Fe2(CO2)2 > Mn2(CO2)2, consistent with orbit order.

  2. Investigations on bacteriochlorophyll in organic solutions

    NARCIS (Netherlands)

    Goedheer, J.C.

    1958-01-01

    Various spectral and photochemical properties of bacteriochlorophyll were studied. It was found that the spectral shift of the second absorption band of this pigment in polar solvents is nearly absent in the magnesium-free pigment. The quantum yield of irreversible bleaching was determined with

  3. Computational study of short-range interactions in bacteriochlorophyll aggregates

    Czech Academy of Sciences Publication Activity Database

    Alster, J.; Kabeláč, Martin; Tůma, R.; Pšenčík, J.; Burda, J. V.

    2012-01-01

    Roč. 998, SI (2012), s. 87-97 ISSN 2210-271X R&D Projects: GA AV ČR IAA400550808 Grant - others:GA ČR(CZ) GA206/09/0375; GA MŠk(CZ) ME10149 Program:GA Institutional support: RVO:61388963 Keywords : chlorosome * bacteriochlorophyll * molecular simulations Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.139, year: 2012

  4. Studies on bacterial chromatophores I. Reversible disturbance of transfer of electronic excitation energy between bacteriochlorophyll-types in chromatium

    NARCIS (Netherlands)

    Bril, C.

    1960-01-01

    Desocycholate affects the transfer of excitation energy between bacteriochlorophyll-types in Chromatium chromatophores. It is suggested, that the detergent fragments the chromatophore into subunits and subsequenyly disturbs the spatial arrangement of these bacteriochlorophyll-types.

  5. First principles investigation of the structure of a bacteriochlorophyll crystal

    Energy Technology Data Exchange (ETDEWEB)

    Marchi, M. [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)]|[Centre d`Etudes Saclay, Gif-sur-Yvette (France); Hutter, J.; Parrinello, M. [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)

    1996-08-21

    In this communication we present an ab initio study of the crystal of methyl bacteriophorbide (MeBPheo) a, a bacteriochlorophyll derivative, and high-precision structure of which is available. Our main purpose has been to investigate the viability of the technique toward complex molecular systems relevant to biologically important phenomena, in this particular case photosynthesis. Here we present the following results: First, we show that DFT is capable of calculating nuclear positions in excellent agreement with the experimental X-ray structure. Second, the calculated electronic density of the HOMO orbital reveals a {pi} type bond between rings I and III, consistent with the one-dimensional chain structure of the MeBPheo a molecules in the crystal. Finally, after performing the optimization of the molecular geometry with one electron in the LUMO state, we find localized bond length changes near the ring II of the MeBPheo a. 19 refs., 3 figs.

  6. Quenching of bacteriochlorophyll fluorescence in chlorosomes from Chloroflexus aurantiacus by exogenous quinones

    DEFF Research Database (Denmark)

    Tokita, S; Frigaard, N-U; Hirota, M

    2000-01-01

    The quenching of bacteriochlorophyll (BChl) c fluorescence in chlorosomes isolated from Chloroflexus aurantiacus was examined by the addition of various benzoquinones, naphthoquinones (NQ), and anthraquinones (AQ). Many quinones showed strong quenching in the micromolar or submicromolar range...

  7. Spectral heterogeneity and carotenoid-to-bacteriochlorophyll energy transfer in LH2 light-harvesting complexes from Allochromatium vinosum.

    Science.gov (United States)

    Magdaong, Nikki M; LaFountain, Amy M; Hacking, Kirsty; Niedzwiedzki, Dariusz M; Gibson, George N; Cogdell, Richard J; Frank, Harry A

    2016-02-01

    Photosynthetic organisms produce a vast array of spectral forms of antenna pigment-protein complexes to harvest solar energy and also to adapt to growth under the variable environmental conditions of light intensity, temperature, and nutrient availability. This behavior is exemplified by Allochromatium (Alc.) vinosum, a photosynthetic purple sulfur bacterium that produces different types of LH2 light-harvesting complexes in response to variations in growth conditions. In the present work, three different spectral forms of LH2 from Alc. vinosum, B800-820, B800-840, and B800-850, were isolated, purified, and examined using steady-state absorption and fluorescence spectroscopy, and ultrafast time-resolved absorption spectroscopy. The pigment composition of the LH2 complexes was analyzed by high-performance liquid chromatography, and all were found to contain five carotenoids: lycopene, anhydrorhodovibrin, spirilloxanthin, rhodopin, and rhodovibrin. Spectral reconstructions of the absorption and fluorescence excitation spectra based on the pigment composition revealed significantly more spectral heterogeneity in these systems compared to LH2 complexes isolated from other species of purple bacteria. The data also revealed the individual carotenoid-to-bacteriochlorophyll energy transfer efficiencies which were correlated with the kinetic data from the ultrafast transient absorption spectroscopic experiments. This series of LH2 complexes allows a systematic exploration of the factors that determine the spectral properties of the bound pigments and control the rate and efficiency of carotenoid-to-bacteriochlorophyll energy transfer.

  8. The length of esterifying alcohol affects the aggregation properties of chlorosomal bacteriochlorophylls

    Czech Academy of Sciences Publication Activity Database

    Župčanová, Anita; Arellano, J. B.; Bína, David; Kopecký, Jiří; Pšenčík, J.; Vácha, František

    2008-01-01

    Roč. 84, č. 5 (2008), s. 1187-1194 ISSN 0031-8655 R&D Projects: GA ČR(CZ) GA206/05/2739 Institutional research plan: CEZ:AV0Z50510513 Keywords : bacteriochlorophylls Subject RIV: BO - Biophysics Impact factor: 2.287, year: 2008

  9. Complete genome sequence of the photoautotrophic and bacteriochlorophyll e-synthesizing green sulfur bacterium Chlorobaculum limnaeum DSM 1677T

    DEFF Research Database (Denmark)

    Tank, Marcus; Liu, Zhenfeng; Frigaard, Niels-Ulrik

    2017-01-01

    Chlorobaculum limnaeum DSM 1677T is a mesophilic, brown-colored, chlorophototrophic green sulfur bacterium that produces bacteriochlorophyll e and the carotenoid isorenieratene as major pigments. This bacterium serves as a model organism in molecular research on photosynthesis, sulfur metabolism...

  10. Bacteriochlorophyll Aggregates Self-Assembled on Functionalized Gold Nanorod Cores as Mimics of Photosynthetic Chlorosomal Antennae: A Single Molecule Study

    Czech Academy of Sciences Publication Activity Database

    Furumaki, S.; Vácha, František; Hirata, S.; Vácha, M.

    2014-01-01

    Roč. 8, č. 3 (2014), s. 2176-2182 ISSN 1936-0851 Institutional support: RVO:60077344 Keywords : Single molecule spectroscopy * molecular aggregate * bacteriochlorophyll * chromosome Subject RIV: BO - Biophysics Impact factor: 12.881, year: 2014

  11. Multireference excitation energies for bacteriochlorophylls A within light harvesting system 2

    DEFF Research Database (Denmark)

    Anda, Andre; Hansen, Thorsten; De Vico, Luca

    2016-01-01

    Light-harvesting system 2 (LH2) of purple bacteria is one of the most popular antenna complexes used to study Nature's way of collecting and channeling solar energy. The dynamics of the absorbed energy is probed by ultrafast spectroscopy. Simulation of these experiments relies on fitting a range...... of parameters to reproduce the spectra. Here, we present a method that can determine key parameters to chemical accuracy. These will eliminate free variables in the modeling, thus reducing the problem. Using MS-RASPT2/RASSCF calculations, we compute excitation energies and transition dipole moments of all...... bacteriochlorophylls in LH2. We find that the excitation energies vary among the bacteriochlorophyll monomers and that they are regulated by the curvature of the macrocycle ring and the dihedral angle of an acetyl moiety. Increasing the curvature lifts the ground state energy, which causes a red shift...

  12. Molecular genetic and molecular evolutionary studies on the bacteriochlorophyll synthesis genes of Rhodobacter capsulatus

    Energy Technology Data Exchange (ETDEWEB)

    Burke-Agueero, Donald H. [Univ. of California, Berkeley, CA (United States)

    1992-08-01

    Rhodobacter capsulatus, purple bacterium capable of either aerobic or photosynthetic growth, has proven to be very useful in genetic studies of photosynthesis. Forty-four genes clustered together within a 46 kilobase region are required to establish photosynthetic ability in R. capsulatus. Approximately twenty of these genes are involved in bacteriochlorophyll synthesis of which eight ``bch`` genes are the subject of this thesis. Six of these genes were found to code for the two ring reductases. The first converts protochlorophyllide (PChlide) into a chlorin, the immediate precursor to chlorophyll a, and then into a bacteriochlorin. Each reductase is shown to be made up of three subunits. PChlide reductase is coded by the genes bchN, bchB, and bchL. Proteins with amino acid sequences markedly similar to those of bchN and bchL have been shown in other organisms to be required for chlorophyll synthesis; hence, their designation as chlN and chlB. A third chloroplast-encoded gene of heretofore unknown function shares amino acid identities with bchB and is probably the third subunit of the plant PChlide reductase. The bchA locus, which encodes the chlorin reductase, is found to be made up of three separate, translationally coupled genes, referred to as bchX, bchY, and bchZ. Amino acid similarities between bchX, bchL, and the nitrogenase reductase protein nifH suggest that all three classes of proteins share certain three-dimensional structural features, including elements that are central to the enzymatic mechanism of nifH. PChlide reductase and chlorin reductase are clearly derived from a common ancestor. Several lines of analysis suggests the ancestor of both enzyme systems reduced PChlide twice to produce bacteriochlorophyll supporting the concept bacteriochlorophyll as the ancestral reaction center pigment.

  13. Molecular genetic and molecular evolutionary studies on the bacteriochlorophyll synthesis genes of Rhodobacter capsulatus

    Energy Technology Data Exchange (ETDEWEB)

    Burke-Agueero, D.H.

    1992-08-01

    Rhodobacter capsulatus, purple bacterium capable of either aerobic or photosynthetic growth, has proven to be very useful in genetic studies of photosynthesis. Forty-four genes clustered together within a 46 kilobase region are required to establish photosynthetic ability in R. capsulatus. Approximately twenty of these genes are involved in bacteriochlorophyll synthesis of which eight bch'' genes are the subject of this thesis. Six of these genes were found to code for the two ring reductases. The first converts protochlorophyllide (PChlide) into a chlorin, the immediate precursor to chlorophyll a, and then into a bacteriochlorin. Each reductase is shown to be made up of three subunits. PChlide reductase is coded by the genes bchN, bchB, and bchL. Proteins with amino acid sequences markedly similar to those of bchN and bchL have been shown in other organisms to be required for chlorophyll synthesis; hence, their designation as chlN and chlB. A third chloroplast-encoded gene of heretofore unknown function shares amino acid identities with bchB and is probably the third subunit of the plant PChlide reductase. The bchA locus, which encodes the chlorin reductase, is found to be made up of three separate, translationally coupled genes, referred to as bchX, bchY, and bchZ. Amino acid similarities between bchX, bchL, and the nitrogenase reductase protein nifH suggest that all three classes of proteins share certain three-dimensional structural features, including elements that are central to the enzymatic mechanism of nifH. PChlide reductase and chlorin reductase are clearly derived from a common ancestor. Several lines of analysis suggests the ancestor of both enzyme systems reduced PChlide twice to produce bacteriochlorophyll supporting the concept bacteriochlorophyll as the ancestral reaction center pigment.

  14. Self-assembly of natural light-harvesting bacteriochlorophylls of green sulfur photosynthetic bacteria in silicate capsules as stable models of chlorosomes.

    Science.gov (United States)

    Saga, Yoshitaka; Akai, Sho; Miyatake, Tomohiro; Tamiaki, Hitoshi

    2006-01-01

    Naturally occurring bacteriochlorophyll(BChl)s-c, -d, and -e from green sulfur photosynthetic bacteria were self-assembled in an aqueous solution in the presence of octadecyltriethoxysilane and tetraethoxysilane, followed by polycondensation of the alkoxysilanes by incubation for 50 h at 25 degrees C. The resulting BChl self-assemblies in silicate capsules exhibited visible absorption and circular dichroism spectra similar to the corresponding natural light-harvesting systems (chlorosomes) of green sulfur bacteria. Dynamic light scattering measurements indicated that the silicate capsules had an average hydrodynamic diameter of several hundred nanometers. BChl self-aggregates in silicate capsules were significantly stable to a nonionic surfactant Triton X-100, which was apt to decompose the BChl aggregates to their monomeric form, compared with conventional micelle systems. BChls in silicate capsules were more tolerant to demetalation of the central magnesium under acidic conditions than the natural systems.

  15. Self-assembly and energy transfer in artificial light-harvesting complexes of bacteriochlorophyll c with astaxanthin

    Czech Academy of Sciences Publication Activity Database

    Alster, J.; Polívka, Tomáš; Arellano, J.B.; Hříbek, P.; Vácha, František; Hala, J.; Pšenčík, J.

    2012-01-01

    Roč. 111, 1-2 (2012), s. 193-204 ISSN 0166-8595 R&D Projects: GA ČR GA206/09/0375 Institutional research plan: CEZ:AV0Z50510513 Keywords : light- harvesting * astaxanthin * self-assembly * bacteriochlorophyll aggregates Subject RIV: BO - Biophysics Impact factor: 3.150, year: 2012

  16. The lamellar spacing in self-assembling bacteriochlorophyll aggregates is proportional to the length of the esterifying alcohol

    Czech Academy of Sciences Publication Activity Database

    Pšenčík, J.; Torkkeli, M.; Župčanová, Anita; Vácha, František; Serimaa, R.E.; Tůma, R.

    2010-01-01

    Roč. 104, 2-3 (2010), s. 211-219 ISSN 0166-8595 R&D Projects: GA ČR GA206/09/0375 Institutional research plan: CEZ:AV0Z50510513 Keywords : Green photosynthetic bacteria * Chlorosome * Bacteriochlorophyll Subject RIV: CE - Biochemistry Impact factor: 2.410, year: 2010

  17. Pheophytinization of bacteriochlorophyll c and energy transfer in cells of Chlorobium tepidum

    DEFF Research Database (Denmark)

    Tokita, S; Hirota, M; Frigaard, N-U

    1999-01-01

    spectrum showed maxima at 775 and 810 nm, which correspond to emissions from BChl c and BChl a, respectively. This indicates energy transfer from BPhe c to BChl c and BChl a. In cells in which BChl c was completely pheophytinized, fluorescence measurements were indicative of direct energy transfer from......Bacteriochlorophyll (BChl) c in whole cells of Chlorobium tepidum grown at 46 degrees C changed into bacteriopheophytin (BPhe) c within 10 days after reaching full growth. When a small amount of C. tepidum cells in which BChl c had been completely pheophytinized were transferred to a new culture......640). These results indicate that C. tepidum can survive even when BChl c has been completely pheophytinized and that BChl c is newly synthesized in such cells when transferred to a new culture medium. In partly pheophytinized cells, upon excitation of BPhe c at 550 nm the fluorescence emission...

  18. Carotenoid-to-bacteriochlorophyll energy transfer through vibronic coupling in LH2 from Phaeosprillum molischianum.

    Science.gov (United States)

    Thyrhaug, Erling; Lincoln, Craig N; Branchi, Federico; Cerullo, Giulio; Perlík, Václav; Šanda, František; Lokstein, Heiko; Hauer, Jürgen

    2018-03-01

    The peripheral light-harvesting antenna complex (LH2) of purple photosynthetic bacteria is an ideal testing ground for models of structure-function relationships due to its well-determined molecular structure and ultrafast energy deactivation. It has been the target for numerous studies in both theory and ultrafast spectroscopy; nevertheless, certain aspects of the convoluted relaxation network of LH2 lack a satisfactory explanation by conventional theories. For example, the initial carotenoid-to-bacteriochlorophyll energy transfer step necessary on visible light excitation was long considered to follow the Förster mechanism, even though transfer times as short as 40 femtoseconds (fs) have been observed. Such transfer times are hard to accommodate by Förster theory, as the moderate coupling strengths found in LH2 suggest much slower transfer within this framework. In this study, we investigate LH2 from Phaeospirillum (Ph.) molischianum in two types of transient absorption experiments-with narrowband pump and white-light probe resulting in 100 fs time resolution, and with degenerate broadband 10 fs pump and probe pulses. With regard to the split Q x band in this system, we show that vibronically mediated transfer explains both the ultrafast carotenoid-to-B850 transfer, and the almost complete lack of transfer to B800. These results are beyond Förster theory, which predicts an almost equal partition between the two channels.

  19. Reconstruction of bacteriochlorophyll biosynthesis pathways in the filamentous anoxygenic phototrophic bacterium Oscillochloris trichoides DG-6 and evolution of anoxygenic phototrophs of the order Chloroflexales.

    Science.gov (United States)

    Grouzdev, Denis S; Kuznetsov, Boris B; Keppen, Olga I; Krasil'nikova, Elena N; Lebedeva, Natalia V; Ivanovsky, Ruslan N

    2015-01-01

    It is commonly accepted that green filamentous anoxygenic phototrophic (FAP) bacteria are the most ancient representatives of phototrophic micro-organisms. Modern FAPs belonging to the order Chloroflexales are divided into two suborders: Chloroflexineae and Roseiflexineae. Representatives of Roseiflexineae lack chlorosomes and synthesize bacteriochlorophyll a, whereas those of Chloroflexineae synthesize bacteriochlorophylls a and c and utilize chlorosomes for light harvesting. Though they constitute a small number of species, FAPs are quite diverse in their physiology. This bacterial group includes autotrophs and heterotrophs, thermophiles and mesophiles, aerobes and anaerobes, occupying both freshwater and halophilic environments. The anaerobic mesophilic autotroph Oscillochloris trichoides DG-6 is still not well studied in its physiology, and its evolutionary origin remains unclear. The goals of this study included identification of the reaction centre type of O. trichoides DG-6, reconstruction of its bacteriochlorophyll biosynthesis pathways, and determination of its evolutionary relationships with other FAPs. By enzymic and genomic analysis, the presence of RCII in O. trichoides DG-6 was demonstrated and the complete gene set involved in biosynthesis of bacteriochlorophylls a and c was established. We found that the bacteriochlorophyll gene sets differed between aerobic and anaerobic FAPs. The aerobic FAP genomes code oxygen-dependent AcsF cyclases, but lack the bchQ/bchR genes, which have been associated with adaptation to low light conditions in the anaerobic FAPs. A scenario of evolution of FAPs belonging to the order Chloroflexales is proposed. © 2015 The Authors.

  20. Bacteriochlorophyll f: properties of chlorosomes containing the “forbidden chlorophyll”

    Directory of Open Access Journals (Sweden)

    Kajetan Vogl

    2012-08-01

    Full Text Available The chlorosomes of green sulfur bacteria (GSB are mainly assembled from one of three types of bacteriochlorophylls (BChls, BChls c, d, and e. By analogy to the relationship between BChl c and BChl d (20-desmethyl-BChl c, a fourth type of BChl, BChl f (20-desmethyl-BChl e, should exist but has not yet been observed in nature. The bchU gene (bacteriochlorophyllide C-20 methyltransferase of the brown-colored green sulfur bacterium Chlorobaculum limnaeum was inactivated by conjugative transfer from Eshcerichia coli and homologous recombination of a suicide plasmid carrying a portion of the bchU. The resulting bchU mutant was greenish brown in color and synthesized BChl fF. The chlorosomes of the bchU mutant had similar size and polypeptide composition as those of the wild type (WT, but the Qy absorption band of the BChl f aggregates was blue-shifted 16 nm (705 nm vs. 721 nm for the WT. Fluorescence spectroscopy showed that energy transfer to the baseplate was much less efficient in chlorosomes containing BChl f than in WT chlorosomes containing BChl e. When cells were grown at high irradiance with tungsten or fluorescent light, the WT and bchU mutant had identical growth rates. However, the WT grew about 40% faster than the bchU mutant at low irradiance (10 μmol photons m−2 s-1. Less efficient energy transfer from BChl f aggregates to BChl a in the baseplate, the much slower growth of the strain producing BChl f relative to the WT, and competition from other phototrophs, may explain why BChl f is not observed naturally.

  1. Vibronic coupling explains the ultrafast carotenoid-to-bacteriochlorophyll energy transfer in natural and artificial light harvesters

    Energy Technology Data Exchange (ETDEWEB)

    Perlík, Václav; Seibt, Joachim; Šanda, František; Mančal, Tomáš [Institute of Physics, Faculty of Mathematics and Physics, Charles University in Prague, Ke Karlovu 5, Prague 121 16 (Czech Republic); Cranston, Laura J.; Cogdell, Richard J. [Institute of Molecular Cell and System Biology, College of Medical, Veterinary and Life Sciences, University of Glasgow, Glasgow Biomedical Research Centre, 120 University Place, Glasgow G12 8TA, Scotland (United Kingdom); Lincoln, Craig N.; Hauer, Jürgen, E-mail: juergen.hauer@tuwien.ac.at [Photonics Institute, Vienna University of Technology, Gusshausstrasse 27, 1040 Vienna (Austria); Savolainen, Janne [Department of Physical Chemistry II, Ruhr-University Bochum, 44780 Bochum (Germany)

    2015-06-07

    The initial energy transfer steps in photosynthesis occur on ultrafast timescales. We analyze the carotenoid to bacteriochlorophyll energy transfer in LH2 Marichromatium purpuratum as well as in an artificial light-harvesting dyad system by using transient grating and two-dimensional electronic spectroscopy with 10 fs time resolution. We find that Förster-type models reproduce the experimentally observed 60 fs transfer times, but overestimate coupling constants, which lead to a disagreement with both linear absorption and electronic 2D-spectra. We show that a vibronic model, which treats carotenoid vibrations on both electronic ground and excited states as part of the system’s Hamiltonian, reproduces all measured quantities. Importantly, the vibronic model presented here can explain the fast energy transfer rates with only moderate coupling constants, which are in agreement with structure based calculations. Counterintuitively, the vibrational levels on the carotenoid electronic ground state play the central role in the excited state population transfer to bacteriochlorophyll; resonance between the donor-acceptor energy gap and the vibrational ground state energies is the physical basis of the ultrafast energy transfer rates in these systems.

  2. Vibronic coupling explains the ultrafast carotenoid-to-bacteriochlorophyll energy transfer in natural and artificial light harvesters

    International Nuclear Information System (INIS)

    Perlík, Václav; Seibt, Joachim; Šanda, František; Mančal, Tomáš; Cranston, Laura J.; Cogdell, Richard J.; Lincoln, Craig N.; Hauer, Jürgen; Savolainen, Janne

    2015-01-01

    The initial energy transfer steps in photosynthesis occur on ultrafast timescales. We analyze the carotenoid to bacteriochlorophyll energy transfer in LH2 Marichromatium purpuratum as well as in an artificial light-harvesting dyad system by using transient grating and two-dimensional electronic spectroscopy with 10 fs time resolution. We find that Förster-type models reproduce the experimentally observed 60 fs transfer times, but overestimate coupling constants, which lead to a disagreement with both linear absorption and electronic 2D-spectra. We show that a vibronic model, which treats carotenoid vibrations on both electronic ground and excited states as part of the system’s Hamiltonian, reproduces all measured quantities. Importantly, the vibronic model presented here can explain the fast energy transfer rates with only moderate coupling constants, which are in agreement with structure based calculations. Counterintuitively, the vibrational levels on the carotenoid electronic ground state play the central role in the excited state population transfer to bacteriochlorophyll; resonance between the donor-acceptor energy gap and the vibrational ground state energies is the physical basis of the ultrafast energy transfer rates in these systems

  3. The bchU gene of Chlorobium tepidum encodes the C-20 methyltransferase in bacteriochlorophyll c biosynthesis

    DEFF Research Database (Denmark)

    Maresca, Julia A; Gomez Maqueo Chew, Aline; Ponsatí, Marta Ros

    2004-01-01

    Bacteriochlorophylls (BChls) c and d, two of the major light-harvesting pigments in photosynthetic green sulfur bacteria, differ only by the presence of a methyl group at the C-20 methine bridge position in BChl c. A gene potentially encoding the C-20 methyltransferase, bchU, was identified...

  4. Towards first-principles calculation of electronic excitations in the ring of the protein-bound bacteriochlorophylls

    Science.gov (United States)

    Polyakov, Igor V.; Khrenova, Maria G.; Moskovsky, Alexander A.; Shabanov, Boris M.; Nemukhin, Alexander V.

    2018-04-01

    Modeling electronic excitation of bacteriochlorophyll (BChl) molecules in light-harvesting (LH) antennae from photosynthetic centers presents a challenge for the quantum theory. We report on a quantum chemical study of the ring of 32 BChl molecules from the bacterial core complex LH1-RC. Diagonal and off-diagonal elements of the excitonic Hamiltonian matrices are estimated in quantum chemical calculations of relevant fragments using the TD-DFT and CIS approaches. The deviation of the computed excitation energy of this BChl system from the experimental data related to the Qy band maximum of this LH1-RC complex is about 0.2 eV. We demonstrate that corrections due to improvement in modeling of an individual BChl molecule and due to contributions from the protein environment are in the range of the obtained discrepancy between theory and experiment. Differences between results of the excitonic model and direct quantum chemical calculations of BChl aggregates fall in the same range.

  5. Humitalea rosea gen. nov., sp. nov., an aerobic bacteriochlorophyll-containing bacterium of the family Acetobacteraceae isolated from soil.

    Science.gov (United States)

    Margesin, Rosa; Zhang, De-Chao

    2013-04-01

    A Gram-staining-negative, pale-pink-pigmented, non-motile, obligately aerobic and rod-shaped bacterium, designated strain W37(T), was isolated from soil and subjected to a taxonomic investigation using a polyphasic approach. The strain grew at 1-30 °C, oxidized thiosulfate and accumulated polyhydroxyalkanoates. Photosynthetic pigments were represented by bacteriochlorophyll a and carotenoids. Phylogenetic analysis based on 16S rRNA gene sequences indicated that strain W37(T) was most closely related to members of the genera Roseococcus and Rubritepida (with sequence similarities of Acetobacteraceae. The polar lipid profile comprised diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, phosphatidylcholine, three unidentified aminolipids and one other unidentified lipid. The predominant cellular fatty acids were C18 : 1ω7c and summed feature 3 (C16 : 1ω7c and/or iso-C15 : 0 2-OH). The DNA G+C content of strain W37(T) was 68.2 mol%. On the basis of phenotypic characteristics and phylogenetic analysis, strain W37(T) represents a novel species of a new genus in the family Acetobacteraceae, for which the name Humitalea rosea gen. nov., sp. nov. is proposed. The type strain of the type species is W37(T) ( = CIP 110261(T) = LMG 26243(T)).

  6. Excitation energy transfer from the bacteriochlorophyll Soret band to carotenoids in the LH2 light-harvesting complex from Ectothiorhodospira haloalkaliphila is negligible.

    Science.gov (United States)

    Razjivin, A P; Lukashev, E P; Kompanets, V O; Kozlovsky, V S; Ashikhmin, A A; Chekalin, S V; Moskalenko, A A; Paschenko, V Z

    2017-09-01

    Pathways of intramolecular conversion and intermolecular electronic excitation energy transfer (EET) in the photosynthetic apparatus of purple bacteria remain subject to debate. Here we experimentally tested the possibility of EET from the bacteriochlorophyll (BChl) Soret band to the singlet S 2 level of carotenoids using femtosecond pump-probe measurements and steady-state fluorescence excitation and absorption measurements in the near-ultraviolet and visible spectral ranges. The efficiency of EET from the Soret band of BChl to S 2 of the carotenoids in light-harvesting complex LH2 from the purple bacterium Ectothiorhodospira haloalkaliphila appeared not to exceed a few percent.

  7. Fructose metabolism of the purple non-sulfur bacterium Rhodospirillum rubrum: effect of carbon dioxide on growth, and production of bacteriochlorophyll and organic acids.

    Science.gov (United States)

    Rudolf, Christiane; Grammel, Hartmut

    2012-04-05

    During fermentative metabolism, carbon dioxide fixation plays a key role in many bacteria regarding growth and production of organic acids. The present contribution, dealing with the facultative photosynthetic bacterium Rhodospirillum rubrum, reveals not only the strong influence of ambient carbon dioxide on the fermentative break-down of fructose but also a high impact on aerobic growth with fructose as sole carbon source. Both growth rates and biomass yield increased with increasing carbon dioxide supply in chemoheterotrophic aerobic cultures. Furthermore, intracellular metabolite concentration measurements showed almost negligible concentrations of the tricarboxylic acid cycle intermediates succinate, fumarate and malate under aerobic growth, in contrast to several metabolites of the glycolysis. In addition, we present a dual phase fed-batch process, where an aerobic growth phase is followed by an anaerobic production phase. The biosynthesis of bacteriochlorophyll and the secretion of organic acids were both affected by the carbon dioxide supply, the pH value and by the cell density at the time of switching from aerobic to anaerobic conditions. The formation of pigmented photosynthetic membranes and the amount of bacteriochlorophyll were inversely correlated to the secretion of succinate. Accounting the high biotechnological potential of R. rubrum, optimization of carbon dioxide supply is important because of the favored application of fructose-containing fermentable feedstock solutions in bio-industrial processes. Copyright © 2012 Elsevier Inc. All rights reserved.

  8. Association of bacteriochlorophyll a with the CsmA protein in chlorosomes of the photosynthetic green filamentous bacterium Chloroflexus aurantiacus

    DEFF Research Database (Denmark)

    Sakuragi, Y; Frigaard, N-U; Shimada, K

    1999-01-01

    The protein assumed to be associated with bacteriochlorophyll (BChl) a in chlorosomes from the photosynthetic green filamentous bacterium Chloroflexus aurantiacus was investigated by alkaline treatment, proteolytic digestion and a new treatment using 1-hexanol, sodium cholate and Triton X-100. Upon...... alkaline treatment, only the 5.7 kDa CsmA protein was removed from the chlorosomes among six proteins detected by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis, concomitantly with the disappearance of BChl a absorption at 795 nm. Trypsin treatment removed two proteins...... of BChl a to CsmA in isolated chlorosomes, which was estimated to be between 1.2 and 2.7 by amino acid analysis of the SDS-PAGE-resolved protein bands....

  9. On the biphoton excitation of the fluorescence of the bacteriochlorophyll molecules of purple photosynthetic bacteria by powerful near IR femto-picosecond pulses

    Energy Technology Data Exchange (ETDEWEB)

    Borisov, A. Yu., E-mail: borissov@belozersky.msu.ru [Moscow State University, Belozersky Institute of Physicochemical Biology (Russian Federation)

    2011-11-15

    The authors of a number of experimental works detected nonresonance biphoton excitation of bacteriochlorophyll molecules, which represent the main pigment in the light-absorbing natural 'antenna' complexes of photosynthesizing purple bacteria, by femtosecond IR pulses (1250-1500 nm). They believe that IR quanta excite hypothetic forbidden levels of the pigments of these bacteria in the double frequency range 625-750 nm. We propose and ground an alternative triplet mechanism to describe this phenomenon. According to our hypothesis, the mechanism of biphoton excitation of molecules by IR quanta can manifest itself specifically, through high triplet levels of molecules in the high fields induced by femtosecond-picosecond laser pulses.

  10. The syn/anti-Dichotomy in the Palladium-Catalyzed Addition of Nucleophiles to Alkenes

    Czech Academy of Sciences Publication Activity Database

    Kočovský, Pavel; Bäckvall, J. E.

    2015-01-01

    Roč. 21, č. 1 (2015), s. 36-56 ISSN 0947-6539 Institutional support: RVO:61388963 Keywords : alkenes * catalysis * nucleophilic addition * palladium * stereochemistry Subject RIV: CC - Organic Chemistry Impact factor: 5.771, year: 2015 http://onlinelibrary.wiley.com/doi/10.1002/chem.201404070/pdf

  11. Selective Protein Extraction from Chlorobium tepidum Chlorosomes Using Detergents. Evidence That CsmA Forms Multimers and Binds Bacteriochlorophyll a

    DEFF Research Database (Denmark)

    Bryant, Donald A; Vassilieva, Elena V; Frigaard, Niels-Ulrik

    2002-01-01

    and location of this BChl a are not yet clearly understood. Chlorosomes were treated with sodium dodecyl sulfate (SDS), Lubrol PX, or Triton X-100, separately or in combination with 1-hexanol, and the extracted components were separated from the residual chlorosomes by ultrafiltration on centrifugal filters....... When chlorosomes were treated with low concentrations of SDS, all proteins except CsmA were extracted. However, this treatment did not significantly alter the size and shape of the chlorosomes, did not extract the BChl a, and caused only minor changes in the absorption spectrum of the chlorosomes....... Cross-linking studies with SDS-treated chlorosomes revealed the presence of multimers of the major chlorosome protein, CsmA, up to homooctamers. Extraction of chlorosomes with SDS and 1-hexanol solubilized all ten chlorosome envelope proteins as well as BChl a. Although the size and shape...

  12. Ultra-broadband 2D electronic spectroscopy of carotenoid-bacteriochlorophyll interactions in the LH1 complex of a purple bacterium

    Energy Technology Data Exchange (ETDEWEB)

    Maiuri, Margherita [CNR-IFN, Dipartimento di Fisica, Politecnico di Milano, P.zza L. da Vinci 32, Milano 20133 (Italy); Department of Chemistry, Princeton University, Washington Road, Princeton, New Jersey 08544 (United States); Réhault, Julien; Polli, Dario; Cerullo, Giulio, E-mail: giulio.cerullo@polimi.it [CNR-IFN, Dipartimento di Fisica, Politecnico di Milano, P.zza L. da Vinci 32, Milano 20133 (Italy); Carey, Anne-Marie; Hacking, Kirsty; Cogdell, Richard J. [Glasgow Biomedical Research Centre, IBLS, University of Glasgow, 126 Place, Glasgow G12 8TA, Scotland (United Kingdom); Garavelli, Marco [Dipartimento di Chimica “G. Ciamician,” Università di Bologna, Via Selmi 2, IT-40126 Bologna (Italy); CNRS, Institut de Chimie de Lyon, École Normale Supérieure de Lyon, Université de Lyon, 46 Allée d’Italie, F-69364 Lyon Cedex 07 (France); Lüer, Larry [Madrid Institute for Advanced Studies, IMDEA Nanociencia, Madrid (Spain)

    2015-06-07

    We investigate the excitation energy transfer (EET) pathways in the photosynthetic light harvesting 1 (LH1) complex of purple bacterium Rhodospirillum rubrum with ultra-broadband two-dimensional electronic spectroscopy (2DES). We employ a 2DES apparatus in the partially collinear geometry, using a passive birefringent interferometer to generate the phase-locked pump pulse pair. This scheme easily lends itself to two-color operation, by coupling a sub-10 fs visible pulse with a sub-15-fs near-infrared pulse. This unique pulse combination allows us to simultaneously track with extremely high temporal resolution both the dynamics of the photoexcited carotenoid spirilloxanthin (Spx) in the visible range and the EET between the Spx and the B890 bacterio-chlorophyll (BChl), whose Q{sub x} and Q{sub y} transitions peak at 585 and 881 nm, respectively, in the near-infrared. Global analysis of the one-color and two-color 2DES maps unravels different relaxation mechanisms in the LH1 complex: (i) the initial events of the internal conversion process within the Spx, (ii) the parallel EET from the first bright state S{sub 2} of the Spx towards the Q{sub x} state of the B890, and (iii) the internal conversion from Q{sub x} to Q{sub y} within the B890.

  13. Teaching Form as Form

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    2012-01-01

    understanding of form per se, or, to use an expression from this text, of form as form. This challenge can be reduced to one question: how can design teaching support students in achieving not only the ability to recognize and describe different form-related concepts in existing design (i.e. analytical...... and concepts from real designs by studying form in abstract contexts. The challenge for the first approach is how to support students in decoupling form from the work as a whole. The challenge for the second approach is how to translate general form into real design. Hence, choosing between the two approaches...

  14. Modular forms

    NARCIS (Netherlands)

    Edixhoven, B.; van der Geer, G.; Moonen, B.; Edixhoven, B.; van der Geer, G.; Moonen, B.

    2008-01-01

    Modular forms are functions with an enormous amount of symmetry that play a central role in number theory, connecting it with analysis and geometry. They have played a prominent role in mathematics since the 19th century and their study continues to flourish today. Modular forms formed the

  15. Contributors Form

    Directory of Open Access Journals (Sweden)

    Chief Editor

    2016-06-01

    to produce preprints or reprints and translate into languages other than English for sale or free distribution; and 4 the right to republish the work in a collection of articles in any other mechanical or electronic format. We give the rights to the corresponding author to make necessary changes as per the request of the journal, do the rest of the correspondence on our behalf and he/she will act as the guarantor for the manuscript on our behalf. All persons who have made substantial contributions to the work reported in the manuscript, but who are not contributors, are named in the Acknowledgment and have given me/us their written permission to be named. If I/we do not include an Acknowledgment that means I/we have not received substantial contributions from non-contributors and no contributor has been omitted.S NoAuthors' NamesContribution (IJCME Guidelines{1 substantial contributions to conception and design, acquisition of data, or analysis and interpretation of data; 2 drafting the article or revising it critically for important intellectual content; and 3 final approval of the version to be published. Authors should meet conditions 1, 2, and 3}.SignatureDate                              Note: All the authors are required to sign independently in this form in the sequence given above. In case an author has left the institution/country and whose whereabouts are not known, the senior author may sign on his/her behalf taking the responsibility.No addition/deletion/ or any change in the sequence of the authorship will be permissible at a later stage, without valid reasons and permission of the Editor.If the authorship is contested at any stage, the article will be either returned or will not be processed for publication till the issue is solved.Maximum up to 4 authors for short communication and up to 6 authors for original article.

  16. Harmonic Maass forms and mock modular forms

    CERN Document Server

    Bringmann, Kathrin; Ono, Ken

    2017-01-01

    Modular forms and Jacobi forms play a central role in many areas of mathematics. Over the last 10-15 years, this theory has been extended to certain non-holomorphic functions, the so-called "harmonic Maass forms". The first glimpses of this theory appeared in Ramanujan's enigmatic last letter to G. H. Hardy written from his deathbed. Ramanujan discovered functions he called "mock theta functions" which over eighty years later were recognized as pieces of harmonic Maass forms. This book contains the essential features of the theory of harmonic Maass forms and mock modular forms, together with a wide variety of applications to algebraic number theory, combinatorics, elliptic curves, mathematical physics, quantum modular forms, and representation theory.

  17. Harmonic maass forms and mock modular forms

    CERN Document Server

    Bringmann, Kathrin; Ono, Ken

    2017-01-01

    Modular forms and Jacobi forms play a central role in many areas of mathematics. Over the last 10-15 years, this theory has been extended to certain non-holomorphic functions, the so-called "harmonic Maass forms". The first glimpses of this theory appeared in Ramanujan's enigmatic last letter to G. H. Hardy written from his deathbed. Ramanujan discovered functions he called "mock theta functions" which over eighty years later were recognized as pieces of harmonic Maass forms. This book contains the essential features of the theory of harmonic Maass forms and mock modular forms, together with a wide variety of applications to algebraic number theory, combinatorics, elliptic curves, mathematical physics, quantum modular forms, and representation theory.

  18. On good ETOL forms

    DEFF Research Database (Denmark)

    Skyum, Sven

    1978-01-01

    This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete.......This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete....

  19. Modular Forms and Weierstrass Mock Modular Forms

    Directory of Open Access Journals (Sweden)

    Amanda Clemm

    2016-02-01

    Full Text Available Alfes, Griffin, Ono, and Rolen have shown that the harmonic Maass forms arising from Weierstrass ζ-functions associated to modular elliptic curves “encode” the vanishing and nonvanishing for central values and derivatives of twisted Hasse-Weil L-functions for elliptic curves. Previously, Martin and Ono proved that there are exactly five weight 2 newforms with complex multiplication that are eta-quotients. In this paper, we construct a canonical harmonic Maass form for these five curves with complex multiplication. The holomorphic part of this harmonic Maass form arises from the Weierstrass ζ-function and is referred to as the Weierstrass mock modular form. We prove that the Weierstrass mock modular form for these five curves is itself an eta-quotient or a twist of one. Using this construction, we also obtain p-adic formulas for the corresponding weight 2 newform using Atkin’s U-operator.

  20. Manufacturing processes 4 forming

    CERN Document Server

    Klocke, Fritz

    2013-01-01

    This book provides essential information on metal forming, utilizing a practical distinction between bulk and sheet metal forming. In the field of bulk forming, it examines processes of cold, warm and hot bulk forming, as well as rolling and a new addition, the process of thixoforming. As for the field of sheet metal working, on the one hand it deals with sheet metal forming processes (deep drawing, flange forming, stretch drawing, metal spinning and bending). In terms of special processes, the chapters on internal high-pressure forming and high rate forming have been revised and refined. On the other, the book elucidates and presents the state of the art in sheet metal separation processes (shearing and fineblanking). Furthermore, joining by forming has been added to the new edition as a new chapter describing mechanical methods for joining sheet metals. The new chapter “Basic Principles” addresses both sheet metal and bulk forming, in addition to metal physics, plastomechanics and computational basics; ...

  1. Method for forming ammonia

    Science.gov (United States)

    Kong, Peter C.; Pink, Robert J.; Zuck, Larry D.

    2008-08-19

    A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

  2. Mesonic Form Factors

    International Nuclear Information System (INIS)

    Bonnet, Frederic D.R.; Edwards, Robert G.; Felming, George T.; Randal Lewis; David Richards

    2003-01-01

    We have started a program to compute the electromagnetic form factors of mesons. We discuss the techniques used to compute the pion form factor and present preliminary results computed with domain wall valence fermions on MILC asqtad lattices, as well as Wilson fermions on quenched lattices. These methods can easily be extended to rho-to-gamma-pi transition form factors

  3. Isotropy of quadratic forms

    Indian Academy of Sciences (India)

    V. Suresh University Of Hyderabad Hyderabad

    2008-10-31

    Oct 31, 2008 ... Historically, the study of quadratic forms was part of number theory; Minkowski, Siegel, Hasse, Eichler, Kneser and several other mathematicians created a rich arithmetic theory of quadratic forms. V. Suresh University Of Hyderabad Hyderabad. Isotropy of quadratic forms ...

  4. Micro metal forming

    CERN Document Server

    2013-01-01

    Micro Metal Forming, i. e. forming of parts and features with dimensions below 1 mm, is a young area of research in the wide field of metal forming technologies, expanding the limits for applying metal forming towards micro technology. The essential challenges arise from the reduced geometrical size and the increased lot size. In order to enable potential users to apply micro metal forming in production, information about the following topics are given: tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro...

  5. Gravitation and quadratic forms

    Science.gov (United States)

    Ananth, Sudarshan; Brink, Lars; Majumdar, Sucheta; Mali, Mahendra; Shah, Nabha

    2017-03-01

    The light-cone Hamiltonians describing both pure ( N = 0) Yang-Mills and N = 4 super Yang-Mills may be expressed as quadratic forms. Here, we show that this feature extends to theories of gravity. We demonstrate how the Hamiltonians of both pure gravity and N = 8 supergravity, in four dimensions, may be written as quadratic forms. We examine the effect of residual reparametrizations on the Hamiltonian and the resulting quadratic form.

  6. Gravitation and quadratic forms

    Energy Technology Data Exchange (ETDEWEB)

    Ananth, Sudarshan [Indian Institute of Science Education and Research,Pune 411008 (India); Brink, Lars [Department of Physics, Chalmers University of Technology,S-41296 Göteborg (Sweden); Institute of Advanced Studies and Department of Physics & Applied Physics,Nanyang Technological University,Singapore 637371 (Singapore); Majumdar, Sucheta [Indian Institute of Science Education and Research,Pune 411008 (India); Mali, Mahendra [School of Physics, Indian Institute of Science Education and Research,Thiruvananthapuram, Trivandrum 695016 (India); Shah, Nabha [Indian Institute of Science Education and Research,Pune 411008 (India)

    2017-03-31

    The light-cone Hamiltonians describing both pure (N=0) Yang-Mills and N=4 super Yang-Mills may be expressed as quadratic forms. Here, we show that this feature extends to theories of gravity. We demonstrate how the Hamiltonians of both pure gravity and N=8 supergravity, in four dimensions, may be written as quadratic forms. We examine the effect of residual reparametrizations on the Hamiltonian and the resulting quadratic form.

  7. PowerForms

    DEFF Research Database (Denmark)

    Brabrand, Claus; Møller, Anders; Ricky, Mikkel

    2000-01-01

    such validation. Today, CGI programmers often use Perl libraries for simple server-side validation or program customized JavaScript solutions for client-side validation. We present PowerForms, which is an add-on to HTML forms that allows a purely declarative specification of input formats and sophisticated...... interdependencies of form fields. While our work may be seen as inspiration for a future extension of HTML, it is also available for CGI programmers today through a preprocessor that translates a PowerForms document into a combination of standard HTML and JavaScript that works on all combinations of platforms...

  8. Cooperative Station History Forms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Various forms, photographs and correspondence documenting the history of Cooperative station instrumentation, location changes, inspections, and...

  9. Electronic Capitalization Asset Form -

    Data.gov (United States)

    Department of Transportation — National Automated Capitalization Authorization Form used by ATO Engineering Services, Logistics, Accounting for the purpose of identifying and capturing FAA project...

  10. Mastering HTML5 forms

    CERN Document Server

    Gupta, Gaurav

    2013-01-01

    This tutorial will show you how to create stylish forms, not only visually appealing, but interactive and customized, in order to gather valuable user inputs and information.Enhance your skills in building responsive and dynamic web forms using HTML5, CSS3, and related technologies. All you need is a basic understanding of HTML and PHP.

  11. Hepatitis E: Epidemiological forms

    Indian Academy of Sciences (India)

    In these endemic countries, the disease takes two major epidemiological forms. The form that was recognized first was occurrence of large outbreaks affecting several hundred to several thousand cases of acute hepatitis, usually over a short period of a few weeks. However, it was soon realized that the viral agent was also ...

  12. Forms of Arthritis

    Science.gov (United States)

    ... Today, Linda Saisselin takes joy in holding her new grandson—pain free. Photo courtesy of Linda Saisselin Osteoarthritis (OA) — the form of arthritis typically occurring during middle or old age, this is a joint disease that mostly affects ...

  13. NOAA Form 370 Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains information from submitted NOAA Form 370s, also known as the Fisheries Certificate of Origin, for imported shipments of frozen and/or processed...

  14. MAPS Appraisal Report Form

    CERN Multimedia

    HR Department

    2005-01-01

    As announced in Weekly Bulletin 48/2004, from now onwards, the paper MAPS appraisal report form has been replaced by an electronic form, which is available via EDH (on the EDH desktop under Other Tasks / HR & Training) No changes have been made to the contents of the form. Practical information will be available on the web page http://cern.ch/ais/projs/forms/maps/info.htm, and information meetings will be held on the following dates: 18 January 2005: MAIN AUDITORIUM (500-1-001) from 14:00 to 15:30. 20 January 2005: AB AUDITORIUM II (864-1-D02) from14:00 to 15:30. 24 January 2005: AT AUDITORIUM (30-7-018) from 10:00 to 11:30. Human Resources Department Tel. 73566

  15. Science on form

    International Nuclear Information System (INIS)

    Ishizaka, Shozo; Kato, Yoshihiro; Takaki, Ryuji; Toriwaki, Jun-ichiro

    1987-01-01

    The purpose of the Symposium was to discuss interdisciplinal science aspects of form. 'Form' depends on the material and the changes. But, it is the form that appears evident at once and endures. Form is absorbed from every field as media of information. One part of the work covers the description of non-periodic phenomena, morphogenesis or evolution. Irreducible stubborn facts as diseases or social problems, or whatever else that could not be analyzed are integrally challenged to be systematized by computer simulation. The other part covers the finding of laws for determining how systems behave. Attention should be paid to pattern recognition, image processing and pattern formation. The Symposium proceeded with no parallel sessions, and participants from various fields made exciting discussions in an interdisciplinal atmosphere. (Auth.)

  16. VMS forms Output Tables

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These output tables contain parsed and format validated data from the various VMS forms that are sent from any given vessel, while at sea, from the VMS devices on...

  17. Forms of Dystonia

    Science.gov (United States)

    ... Special Events Faces of Dystonia Donate Donate Online Membership Find an Event Donor Bill of Rights About Dystonia Symptoms & Diagnosis Forms of Dystonia Genetics Glossary Treatment Find a Doctor Oral Medications Botulinum Neurotoxin Neurosurgery ...

  18. Forms of global governence

    Directory of Open Access Journals (Sweden)

    Maxim V. Kharkevich

    2014-01-01

    Full Text Available Global governance as a concept defines the meaning of contemporary world politics both as a discipline and as reality. Interdependent and globalized world requires governance, and a global government has not been formed yet. The theoretical possibility of global governance without global government is proved and justified. The purpose of this article is to analytically identify possible forms of global governance. Three such forms of global governance are identified: hierarchical, market and network. In a hierarchy the governance is due to the asymmetry of power between the parties. Market control happens via anonymous pricing mechanism. Network, in contrast to the market is characterized by a closer value link between the actors, but unlike the hierarchical relationship actors are free to leave the network. Global governance takes three forms and is being implemented by different actors. To determine the most efficient form of global governance is impossible. Efficiency depends on the match between a form and an object of government. It should be noted that meta governance is likely to remain a monopoly of institutionally strong states in global governance.

  19. Polyphony and verb forms

    Directory of Open Access Journals (Sweden)

    Jelena Rajić

    2012-12-01

    Full Text Available This paper examines some special uses of indicative and subjunctive verb forms in Spanish, which contemporary linguistics explains using the notions of polyphony, evidentials, echoic representation, quotatives, etc. These terms, even though they refer to different characteristics and belong to different theoretical frameworks, share one common feature: they all refer to diverse linguistic forms (discourse markers, linguistic negation, quotatives, echoic utterances, etc. characterized by the presence and interaction of different voices or points of view in one discourse sequence. In this study we are interested in a description of quotative or polyphonic meanings expressed by specific verb forms and tenses, the imperfect and the conditional, and also by indicative forms in subordinate substantive clauses with a negative main verb and by subjunctive forms in subordinate concessive clauses. Our research focuses on the analysis of the linguistic conditions that make possible the evidential use of the conditional, the imperfect and the echoic (metarepresentative interpretation of indicative and subjunctive forms in the above-mentioned contexts. The examples we discuss show that evidential and echoic interpretations are inferential meanings derived from the extralinguistic situation and the knowledge that speakers have of the world.

  20. Comparative waste forms study

    International Nuclear Information System (INIS)

    Wald, J.W.; Lokken, R.O.; Shade, J.W.; Rusin, J.M.

    1980-12-01

    A number of alternative process and waste form options exist for the immobilization of nuclear wastes. Although data exists on the characterization of these alternative waste forms, a straightforward comparison of product properties is difficult, due to the lack of standardized testing procedures. The characterization study described in this report involved the application of the same volatility, mechanical strength and leach tests to ten alternative waste forms, to assess product durability. Bulk property, phase analysis and microstructural examination of the simulated products, whose waste loading varied from 5% to 100% was also conducted. The specific waste forms investigated were as follows: Cold Pressed and Sintered PW-9 Calcine; Hot Pressed PW-9 Calcine; Hot Isostatic Pressed PW-9 Calcine; Cold Pressed and Sintered SPC-5B Supercalcine; Hot Isostatic pressed SPC-5B Supercalcine; Sintered PW-9 and 50% Glass Frit; Glass 76-68; Celsian Glass Ceramic; Type II Portland Cement and 10% PW-9 Calcine; and Type II Portland Cement and 10% SPC-5B Supercalcine. Bulk property data were used to calculate and compare the relative quantities of waste form volume produced at a spent fuel processing rate of 5 metric ton uranium/day. This quantity ranged from 3173 L/day (5280 Kg/day) for 10% SPC-5B supercalcine in cement to 83 L/day (294 Kg/day) for 100% calcine. Mechanical strength, volatility, and leach resistance tests provide data related to waste form durability. Glass, glass-ceramic and supercalcine ranked high in waste form durability where as the 100% PW-9 calcine ranked low. All other materials ranked between these two groupings

  1. Chemical forms of radioiodine

    International Nuclear Information System (INIS)

    Tachikawa, Enzo

    1979-01-01

    Release of radioiodine built-up during reactor operations presents a potential problem from the standpoint of environmental safety. Among the chemical forms of radioiodine, depending upon the circumstances, organic iodides cast a most serious problem because of its difficulties in the trapping and because of its stability compared to other chemical forms. Furthermore, pellet-cladding interaction (PCl) fuel failures in LWR fuel rods are believed to be stress corrosion cracks caused by embrittling fission product species, radioiodine. To deal with these problems, knowledge is required on the chemical behaviors of radioiodine in and out of fuels, as well as the release behaviors from fuels. Here a brief review is given of these respects, in aiming at clearing-up the questions still remaining unknown. The data seem to indicate that radioiodine exists as a combined form in fuels. upon heating slightly irradiated fuels, the iodine atoms are released in a chemical form associated with uranium atoms. Experiments, however, as needed with specimen of higher burnup, where the interactions of radioiodine with metallic fission products could be favored. The dominant release mechanism of radioiodine under normal operating temperatures will be diffusion to grain boundaries leading to open surfaces. Radiation-induced internal traps, however, after the rate of diffusion significantly. The carbon sources of organic iodides formed under various conditions and its formation mechanisms have also been considered. (author)

  2. On Growth and Form

    Science.gov (United States)

    Maartens, Aidan

    2017-12-01

    D'Arcy Thompson was born in 1860, trained in Edinburgh and Cambridge, and held positions in Dundee and St Andrews, where he worked until his death in 1948. On Growth and Form , his classic work on the mathematical patterns and physical rules underlying biological forms, was first published in 1917. To learn more about the book's context, we met Matthew Jarron, Curator of Museum Services at the University of Dundee, in the University's D'Arcy Thompson Zoology Museum. Surrounded by specimens, many of which were collected by Thompson himself, we discussed the legacy of On Growth and Form and the life of the man behind it. © 2017. Published by The Company of Biologists Ltd.

  3. Waste-form development

    International Nuclear Information System (INIS)

    Neilson, R.M. Jr.; Colombo, P.

    1982-01-01

    Contemporary solidification agents are being investigated relative to their applications to major fuel cycle and non-fuel cycle low-level waste (LLW) streams. Work is being conducted to determine the range of conditions under which these solidification agents can be applied to specific LLW streams. These studies are directed primarily towards defining operating parameters for both improved solidification of problem wastes and solidification of new LLW streams generated from advanced volume reduction technologies. Work is being conducted to measure relevant waste form properties. These data will be compiled and evaluated to demonstrate compliance with waste form performance and shallow land burial acceptance criteria and transportation requirements

  4. Sixth form pure mathematics

    CERN Document Server

    Plumpton, C

    1968-01-01

    Sixth Form Pure Mathematics, Volume 1, Second Edition, is the first of a series of volumes on Pure Mathematics and Theoretical Mechanics for Sixth Form students whose aim is entrance into British and Commonwealth Universities or Technical Colleges. A knowledge of Pure Mathematics up to G.C.E. O-level is assumed and the subject is developed by a concentric treatment in which each new topic is used to illustrate ideas already treated. The major topics of Algebra, Calculus, Coordinate Geometry, and Trigonometry are developed together. This volume covers most of the Pure Mathematics required for t

  5. Many Forms of Culture

    Science.gov (United States)

    Cohen, Adam B.

    2009-01-01

    Psychologists interested in culture have focused primarily on East-West differences in individualism-collectivism, or independent-interdependent self-construal. As important as this dimension is, there are many other forms of culture with many dimensions of cultural variability. Selecting from among the many understudied cultures in psychology,…

  6. Sesotho Address Forms

    Directory of Open Access Journals (Sweden)

    Akindele, Dele Femi

    2008-01-01

    Full Text Available Address forms constitute an integral part of Basotho sociolinguistic etiquette. They are regarded as a kind of emotional capital that may be invested in putting others at ease. They are indicators of deference, politeness and markers of social distance. (Fasold 1990, Akindele 1990, 1991, 1993 This paper examines the address forms used by the Basotho people. It analyzes and discusses the various types and the factors determining their use. The discussion of address forms in Sesotho focuses on First Name, Title plus First Name, Title plus Last Name, Nickname, Multiple Names, and Teknonym. Drawing data from semi-literate and literate urban and rural population of Maseru district of Lesotho, it was found that the commonest form of address used by the Basotho people is title plus first name. e.g. ntate Thabo (father Thabo, 'm'e Puleng (mother Puleng, ausi Maneo (sister Maneo, abuti Mahao (brother Mahao. It is used by close relations, associates, and familiar people in both formal and informal situations.

  7. Documentary form no. 1

    International Nuclear Information System (INIS)

    2002-12-01

    This first documentary form, edited by the national association of local commissions of information about nuclear activities (ANCLI), briefly presents the radioactivity phenomenon, the ionising radiations, the characteristics of radiation sources (activity, half life, energy), and the dosimetry (absorbed, equivalent, efficient doses). (J.S.)

  8. Getting in-formed

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    Work-in-progress paper præsenteret ved PhD Seminar: Analytical strategies and methodologies for the study of virtual worlds at RUC. September 28th to October 1st 2009. I paperet diskuteres den dobbelte bevægelse at vi som forskere via vores undersøgelser bliver informeret og i samme moment putter...... det vi undersøger på form gennem vores beskrivelser. Paperet tager afsæt i empiriske eksempler fra et postdoc projekt om et såkaldt 'serious game' - Mingoville. Projektet følger circuleringer og etableringer af Mingoville 'på en global markedsplads'. I paperet diskuteres hvordan vi som forskere samler....../performer de fænomener vi forsker i. Aktør-Netværks-Teoretiker Bruno Latour (2005) pointerer at enhver beskrivelse også er en form for forklaring. En form for forklaring, der putter ting ind i et skript og dermed også putter ting på form. Paperet diskuterer to tilgange til at gøre serious games og derved skabe viden om...

  9. Manifolds admitting stable forms

    Czech Academy of Sciences Publication Activity Database

    Le, Hong-Van; Panák, Martin; Vanžura, Jiří

    2008-01-01

    Roč. 49, č. 1 (2008), s. 101-11 ISSN 0010-2628 R&D Projects: GA ČR(CZ) GP201/05/P088 Institutional research plan: CEZ:AV0Z10190503 Keywords : stable forms * automorphism groups Subject RIV: BA - General Mathematics

  10. Inequalities for Differential Forms

    CERN Document Server

    Agarwal, Ravi P

    2009-01-01

    Presents a series of local and global estimates and inequalities for differential forms, in particular the ones that satisfy the A-harmonic equations. This work focuses on the Hardy-Littlewood, Poincare, Cacciooli, imbedded and reverse Holder inequalities. It is for researchers, instructors and graduate students

  11. Metal forming and lubrication

    DEFF Research Database (Denmark)

    Bay, Niels

    2000-01-01

    Lubrication is essential in most metal forming processes. The lubricant film has two basic functions, [1]: i. to separate the work piece and tool surfaces and ii. to cool the workpiece and the tool. Separation of the two surfaces implies lower friction facilitating deformation and lowering the tool...

  12. Waste form development

    International Nuclear Information System (INIS)

    Neilson, R.M. Jr.; Colombo, P.

    1982-01-01

    In this program, contemporary solidification agents are being investigated relative to their applications to major fuel cycle and non-fuel cycle low-level waste (LLW) streams. Work is being conducted to determine the range of conditions under which these solidification agents can be applied to specific LLW streams. These studies are directed primarily towards defining operating parameters for both improved solidification of problem wastes and solidification of new LLW streams generated from advanced volume reduction technologies. Work is being conducted to measure relevant waste form properties. These data will be compiled and evaluated to demonstrate compliance with waste form performance and shallow land burial acceptance criteria and transportation requirements (both as they exist and as they are modified with time). 6 tables

  13. Formed HIP Can Processing

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, Kester Diederik [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  14. Forms of Inattentiveness

    DEFF Research Database (Denmark)

    Knudsen, Morten

    2011-01-01

    and kept out of sight in the decision processes by looking at a specific case study involving the construction of a model intended to control, and render transparent, the quality of health services in Denmark. This paper outlines the forms of inattentiveness which make communication blind to information...... that could question the quality model. Five forms of inattentiveness are identified that function as answers to the question of how communication avoids actualizing relevant but also potentially destructive information. This study documents a considerable amount of blindness to potentially relevant themes...... effect of the categories applied. This paper puts forward a fourth type of organizational blindness in addition to the already documented ones, namely self-imposed blindness to potentially destructive information. This paper studies how relevant - but problematic - information is actively ignored...

  15. Differential forms of supermanifolds

    International Nuclear Information System (INIS)

    Beresin, P.A.

    1979-01-01

    The theory of differential and pseUdo-differential forms on supermanifolds is constructed. The definition and notations of superanalogy of the Pontryagin and Chern characteristic classes are given. The theory considered is purely local. The scheme suggested here generalizes the so-called Weil homomorphism for superspace which lays on the basis of the Chern and Potryagin characteristic class theory. The theory can be extended to the global supermanifolds

  16. Personal Information Request Form

    International Development Research Centre (IDRC) Digital Library (Canada)

    PC Forms Inc. 834-4048

    Request Form. Head Office / Siège : PO Box / CP 8500, Ottawa, ON, Canada K1G 3H9 www.idrc.ca www.crdi.ca. (150 Kent Street, Constitution Square / 150, rue Kent, Complexe Constitution Square). Phone / Tél. : 613-236-6163, ext./poste 2348 Fax / Téléc. : 613-565-8212 Email / Courriel : ATIP-AIPRP@idrc.ca. Privacy Act.

  17. Forms of Life

    Directory of Open Access Journals (Sweden)

    Peter Hacker

    2015-10-01

    Full Text Available The phrase ‘Lebensform’ (form of life had a long and varied history prior to Wittgenstein’s use of it on a mere three occasions in the Philosophical Investigations. It is not a pivotal concept in Wittgenstein’s philosophy. But it is a minor signpost of a major reorientation of philosophy, philosophy of language and logic, and philosophy of mathematics that Wittgenstein instigated. For Wittgenstein sought to replace the conception of a language as a meaning calculus (Frege, Russell, the Tractatus by an anthropological or ethnological conception. A language is not a class of sentences that can be formed from a set of axioms (definitions, formation and transformation rules and the meanings of which is given by their truth-conditions, but an open-ended series of interlocking language-games constituting a form of life or way of living (a culture. Wittgenstein’s uses of ‘Lebensform’ and its cognates, both in the Investigations and in his Nachlass are severally analysed, and various exegetical misinterpretations are clarified.

  18. Bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  19. Pion form factor

    Energy Technology Data Exchange (ETDEWEB)

    Ryong Ji, C.; Pang, A.; Szczepaniak, A. [North Carolina State Univ., Raleigh, NC (United States)

    1994-04-01

    It is pointed out that the correct criterion to define the legal PQCD contribution to the exclusive processes in the lightcone perturbative expansion should be based on the large off-shellness of the lightcone energy in the intermediate states. In the lightcone perturbative QCD calculation of the pion form factor, the authors find that the legal PQCD contribution defined by the lightcone energy cut saturates in the smaller Q{sup 2} region compared to that defined by the gluon four-momentum square cut. This is due to the contribution by the highly off-energy-shell gluons in the end point regions of the phase space, indicating that the gluon four-momentum-square cut may have cut too much to define the legal PQCD.

  20. Image forming apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    An image H(x, y) for displaying a target image G(x, y) is displayed on a liquid-crystal display panel and illumination light from an illumination light source is made to pass therethrough to form an image on a PALSLM. Read light hv is radiated to the PALSLM and a phase-modulated light image alpha...... (x, y) read out of the PALSLM is subjected to Fourier transform by a lens. A phase contrast filter gives a predetermined phase shift to only the zero-order light component of Fourier light image alpha f(x, y). The phase-shifted light image is subjected to inverse Fourier transform by a lens...... characteristics of the illumination light source, PALSLM, and phase contrast filter, based on the evaluation result....

  1. ELEMENTAL FORMS OF HOSPITALITY

    Directory of Open Access Journals (Sweden)

    Maximiliano Emanuel Korstanje

    2010-11-01

    Full Text Available Modern studies emphasized on the needs of researching the hospitality as relevant aspects of tourism and hospitality fields. Anyway, these approaches are inextricably intertwined to the industry of tourism and do not take seriously the anthropological and sociological roots of hospitality. In fact, the hotel seems to be a partial sphere of hospitality at all. Under this context, the present paper explores the issue of hospitality enrooted in the political and economic indo-European principle of free-transit which is associated to a much broader origin.  Starting from the premise etymologically hostel and hospital share similar origins, we follow the contributions of J Derrida to determine the elements that formed the hospitality up to date.

  2. Le forme del fondo

    Directory of Open Access Journals (Sweden)

    Michel Maffesoli

    2004-12-01

    Full Text Available Non è vero che la natura ha paura del vuoto. Forse addirittura si completa. Il vuoto è anche una modalità dell'essere. È possibile nidificarvisi, avvolgersi pigramente e, così, proteggersi dall'angoscia del tempo che passa. Il vuoto delle apparenze è, in alcuni momenti, una delle forme d'espressione della vita sociale. Oltretutto occorre saperle riconoscere. Certamente, abbiamo tutti un'esistenza personale, ma siamo, ugualmente, i rappresentanti, a volte anche le vittime, di uno "spirito comune", forse anche di un "inconscio collettivo" che si è costituito di secolo in secolo. E, molto spesso, quando crediamo di esprimere le nostre idee, siamo soltanto dei portavoce, comparse di un vasto "theatrum mundi" dalle dimensioni infinite.

  3. Dimeric form of peroxynitrite

    Science.gov (United States)

    Simon, K. V.; Tulub, A. V.

    2009-07-01

    The (ONOO)- anion, known as peroxynitrite, is characterized by a singlet spin state. A new stable dimer form of peroxynitrite [NO-O2]- in the triplet state at distances close to r(O-N) ≈ 2.885 Å between oxygen in the O2 structure and nitrogen has been established within the quantum-chemical CASSCF approximation. The vibrational motion of the dimer is significantly anharmonic; for the 16O and 14N isotopes, the differences in the energies of two neighboring levels correspond to frequencies of about 70-30 cm-1. The triplet dimer structure retains stability in the case of interaction with water molecules. The activation barriers caused by rearrangement of the peroxynitrite structure into the ground state of the NO{3/-} anion with the symmetry D 3 h are found.

  4. Nucleon Electromagnetic Form Factors

    Energy Technology Data Exchange (ETDEWEB)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  5. Moon (Form-Origin)

    Science.gov (United States)

    Tsiapas, Elias; Soumelidou, Despina; Tsiapas, Christos

    2017-04-01

    When the Earth was formed, it was in a state of burning heat. As time went by, temperature on the planet's surface was falling due to radiation and heat transfer, and various components (crusts) began taking solid form at the Earth's poles. The formation of crusts took place at the Earth's poles, because the stirring of burning and fluid masses on the surface of the Earth was significantly slighter there than it was on the equator. Due to centrifugal force and Coriolis Effect, these solid masses headed towards the equator; those originating from the North Pole followed a south-western course, while those originating from the South Pole followed a north-western course and there they rotated from west to east at a lower speed than the underlying burning and liquid earth, because of their lower initial linear velocity, their solid state and inertia. Because inertia is proportional to mass, the initially larger solid body swept all new solid ones, incorporating them to its western side. The density of the new solid masses was higher, because the components on the surface would freeze and solidify first, before the underlying thicker components. As a result, the western side of the initial islet of solid rocks submerged, while the east side elevated. . As a result of the above, this initial islet began to spin in reverse, and after taking on the shape of a sphere, it formed the "heart" of the Moon. The Moon-sphere, rolling on the equator, would sink the solid rocks that continued to descend from the Earth's poles. The sinking rocks partially melted because of higher temperatures in the greater depths that the Moon descended to, while part of the rocks' mass bonded with the Moon and also served as a heat-insulating material, preventing the descended side of the sphere from melting. Combined with the Earth's liquid mass that covered its emerging eastern surface, new sphere-shaped shells were created, with increased density and very powerful structural cohesion. During the

  6. Cavitation During Superplastic Forming

    Directory of Open Access Journals (Sweden)

    John Campbell

    2011-07-01

    Full Text Available Cavitation is the opening of pores during superplastic forming, typically at grain boundary triple points or on second phase grain boundary particles during slip of grain boundaries. Theories for the initiation of cavitation are reviewed. It seems that cavitation is unlikely to occur by processes intrinsic to metals such as dislocation mechanisms or point defect condensation. It is proposed that cavitation can only occur at non-bonded interfaces such as those introduced extrinsically (i.e., from the outside during the original casting of the metal. These defects, known as oxide bifilms, are naturally introduced during pouring of the liquid metal, and are frozen into the solid, often pushed by dendritic growth into grain boundaries where they are difficult to detect because of their extreme thinness, often measured in nanometres. Their unbonded central interface acts as a crack and can initiate cavitation. Second phase precipitates probably do not nucleate and grow on grain boundaries but grow on bifilms in the boundaries, explaining the apparent association between boundaries, second phase particles and failure initiation. Improved melting and casting techniques can provide metal with reduced or zero bifilm population for which cavitation would not be possible, promising significant improvements in superplastic behaviour.

  7. Les formes du fond

    Directory of Open Access Journals (Sweden)

    Michel Maffesoli

    2004-12-01

    Full Text Available Il n'est pas vrai que la nature a horreur du vide. Peut-être même s'y complait-elle. Le creux est aussi une modalité de l'être. Il est possible de s'y nicher, de s'y lover paresseusement et, ainsi, de se protéger contre l'angoisse du temps qui passe. Le creux des apparences est, à certains moments, une des formes d'expression de la vie sociale. Encore faut-il savoir le reconnaître. Certes, nous avons tous une existence personnelle, mais nous sommes, également, les représentants, parfois même les victimes, d'un "esprit commun", peut-être même d'un "inconscient collectif" qui s'est constitué de siècle en siècle. Et, très souvent, là où nous croyons exprimer nos propres idées, nous ne sommes que les porte-voix, les figurants d'un vaste "theatrum mundi" aux dimensions infinies.

  8. Image forming apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    An image H(x, y) for displaying a target image G(x, y) is displayed on a liquid-crystal display panel and illumination light from an illumination light source is made to pass therethrough to form an image on a PALSLM. Read light hv is radiated to the PALSLM and a phase-modulated light image alpha...... (x, y) read out of the PALSLM is subjected to Fourier transform by a lens. A phase contrast filter gives a predetermined phase shift to only the zero-order light component of Fourier light image alpha f(x, y). The phase-shifted light image is subjected to inverse Fourier transform by a lens...... to project an output image O(x, y) to an output plane. A light image O'(x, y) branched by a beam sampler is picked up by a pickup device and an evaluation value calculating unit evaluates conformity between the image O(x, y) and the image G(x, y).; A control unit performs feedback control of optical...

  9. Forms of War

    International Nuclear Information System (INIS)

    Vogel, H.; Bartelt, D.

    2007-01-01

    Purpose: Under war conditions, employed weapons can be identified on radiographs obtained in X-ray diagnostic. The analysis of such X-ray films allows concluding that there are additional information about the conditions of transport and treatment; it shall be shown that there are X-ray findings which are typical and characteristic for certain forms of warfare. Material and method: The radiograms have been collected during thirty years; they come from hospitals, where war casualties had been treated, and personal collections. Results: The material is selected, because in war X-ray diagnostic will be limited and the interest of the opposing parties influence the access to the material; furthermore the possibilities to publish or to communicate facts and thoughts are different. Citizens of the USA, GB, France, or Israel will have easier access to journals than those of Vietnam, Chad, and Zimbabwe. Under war conditions, poor countries, like North Vietnam may develop own concepts of medical care. There are X-ray findings which are typical or even characteristic for air warfare, guerrilla warfare, gas war, desert warfare, conventional warfare, and annihilation warfare, and city guerrilla warfare/civil war. The examples demonstrate that weapons and the conditions of transport and treatment can be recognized by X-ray findings. The radiogram can be read like a document. Conclusion: In War, there are differences between a treatment and imaging diagnostic in countries, which control the air space and in those who do not. Medical care of the poor, i.e. in countries (in general those opposing the western nations) will hardly be published, and poverty has no advocate

  10. Temporal form in interaction design

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Winther, Morten Trøstrup; Mørch, Nina

    2015-01-01

    Interaction design is distinguished from most other design disciplines through its temporal form. Temporal form is the computational structure that enables and demands a temporal expression in the resulting design. Temporal form is what enables poetry. In music, temporal form is the composition o...

  11. The Analysis of Forming Forces in Single Point Incremental Forming

    Directory of Open Access Journals (Sweden)

    Koh Kyung Hee

    2016-01-01

    Full Text Available Incremental forming is a process to produce sheet metal parts in quick. Because there is no need for dedicated dies and molds, this process is less cost and time spent. The purpose of this study is to investigate forming forces in single point incremental forming. Producing a cone frustum of aluminum is tested for forming forces. A dynamometer is used to collect forming forces and analyze them. These forces are compared with cutting forces upon producing same geometrical shapes of experimental parts. The forming forces in Z direction are 40 times larger than the machining forces. A spindle and its axis of a forming machine should be designed enough to withstand the forming forces.

  12. Advances in metal forming expert system for metal forming

    CERN Document Server

    Hingole, Rahulkumar Shivajirao

    2015-01-01

    This comprehensive book offers a clear account of the theory and applications of advanced metal forming. It provides a detailed discussion of specific forming processes, such as deep drawing, rolling, bending extrusion and stamping. The author highlights recent developments of metal forming technologies and explains sound, new and powerful expert system techniques for solving advanced engineering problems in metal forming. In addition, the basics of expert systems, their importance and applications to metal forming processes, computer-aided analysis of metalworking processes, formability analysis, mathematical modeling and case studies of individual processes are presented.

  13. Tectonics: The meaning of form

    DEFF Research Database (Denmark)

    Christiansen, Karl; Brandt, Per Aage

    Tectonics – The meaning of form deals with one of the core topics of architecture: the relationship between form and content. In the world of architecture, form is not only made from brick, glass and wood. Form means something. When a material is processed with sufficient technical skill and insi......Tectonics – The meaning of form deals with one of the core topics of architecture: the relationship between form and content. In the world of architecture, form is not only made from brick, glass and wood. Form means something. When a material is processed with sufficient technical skill...... perspectives. You can read the chapters in any order you like – from the beginning, end or the middle. There is no correct order. The project is methodologically inductive: the more essays you read, the broader your knowledge of tectonics get....

  14. Adaptive Municipal e-forms

    NARCIS (Netherlands)

    Kuiper, P.M.; van Dijk, Elisabeth M.A.G.; Boerma, A.K.; Weibelzahl, S.; Cristea, A.

    2006-01-01

    Adaptation of electronic forms seems to be a step forward to reduce the burden for people who fill in forms. Municipalities more and more offer eforms online that can be used to request a municipal product or service. To create adaptive e-forms that satisfy the need of end-users, involvement of

  15. Harmony of super form factors

    Science.gov (United States)

    Brandhuber, A.; Gürdoğan, Ö.; Mooney, R.; Travaglini, G.; Yang, G.

    2011-10-01

    In this paper we continue our systematic study of form factors of half-BPS operators in mathcal{N} = 4 super Yang-Mills. In particular, we extend various on-shell techniques known for amplitudes to the case of form factors, including MHV rules, recursion relations, unitarity and dual MHV rules. As an application, we present the solution of the recursion relation for split-helicity form factors. We then consider form factors of the stress-tensor multiplet operator and of its chiral truncation, and write down supersymmetric Ward identities using chiral as well as non-chiral superspace formalisms. This allows us to obtain compact formulae for families of form factors, such as the maximally non-MHV case. Finally we generalise dual MHV rules in dual momentum space to form factors.

  16. FormTracer. A mathematica tracing package using FORM

    Science.gov (United States)

    Cyrol, Anton K.; Mitter, Mario; Strodthoff, Nils

    2017-10-01

    We present FormTracer, a high-performance, general purpose, easy-to-use Mathematica tracing package which uses FORM. It supports arbitrary space and spinor dimensions as well as an arbitrary number of simple compact Lie groups. While keeping the usability of the Mathematica interface, it relies on the efficiency of FORM. An additional performance gain is achieved by a decomposition algorithm that avoids redundant traces in the product tensors spaces. FormTracer supports a wide range of syntaxes which endows it with a high flexibility. Mathematica notebooks that automatically install the package and guide the user through performing standard traces in space-time, spinor and gauge-group spaces are provided. Program Files doi:http://dx.doi.org/10.17632/7rd29h4p3m.1 Licensing provisions: GPLv3 Programming language: Mathematica and FORM Nature of problem: Efficiently compute traces of large expressions Solution method: The expression to be traced is decomposed into its subspaces by a recursive Mathematica expansion algorithm. The result is subsequently translated to a FORM script that takes the traces. After FORM is executed, the final result is either imported into Mathematica or exported as optimized C/C++/Fortran code. Unusual features: The outstanding features of FormTracer are the simple interface, the capability to efficiently handle an arbitrary number of Lie groups in addition to Dirac and Lorentz tensors, and a customizable input-syntax.

  17. Phosphorus Forms and Distribution in Selected Soils Formed Over ...

    African Journals Online (AJOL)

    Phosphorus Forms and Distribution in Selected Soils Formed Over Different Parent Materials in Abia State of Nigeria. ... Fe-P. Organic P correlated positively with Fe-P, Al-P and total P. Ca-P correlated negatively with sand and positively with organic carbon, exchangeable Ca, Al-P and total P. Fe-P correlated positively with ...

  18. Forming processes and mechanics of sheet metal forming

    NARCIS (Netherlands)

    Burchitz, I.A.

    2004-01-01

    The report is dealing with the numerical analysis of forming processes. Forming processes is the large group of manufacturing processes used to obtain various product shapes by means of plastic deformations. The report is organized as follows. An overview of the deformation processes and the

  19. Seal for fluid forming tools

    Science.gov (United States)

    Golovashchenko, Sergey Fedorovich [Beverly Hills, MI; Bonnen, John Joseph Francis [Milford, MI

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  20. Laser forming and welding processes

    CERN Document Server

    Yilbas, Bekir Sami; Shuja, Shahzada Zaman

    2013-01-01

    This book introduces model studies and experimental results associated with laser forming and welding such as laser induced bending, welding of sheet metals, and related practical applications. The book provides insight into the physical processes involved with laser forming and welding. The analytical study covers the formulation of laser induced bending while the model study demonstrates the simulation of bending and welding processes using the finite element method. Analytical and numerical solutions for laser forming and welding problems are provided.

  1. Strange nucleon form-factors

    Science.gov (United States)

    Maas, F. E.; Paschke, K. D.

    2017-07-01

    A broad program measuring parity-violation in electron-nuclear scattering has now provided a large set of precision data on the weak-neutral-current form-factors of the proton. Under comparison with well-measured electromagnetic nucleon form-factors, these measurements reveal the role of the strange quark sea on the low-energy interactions of the proton through the strange-quark-flavor vector form-factors. This review will describe the experimental program and the implications of the global data for the strange-quark vector form-factors. We present here a new fit to the world data.

  2. Confectionery-based dose forms.

    Science.gov (United States)

    Tangso, Kristian J; Ho, Quy Phuong; Boyd, Ben J

    2015-01-01

    Conventional dosage forms such as tablets, capsules and syrups are prescribed in the normal course of practice. However, concerns about patient preferences and market demands have given rise to the exploration of novel unconventional dosage forms. Among these, confectionery-based dose forms have strong potential to overcome compliance problems. This report will review the availability of these unconventional dose forms used in treating the oral cavity and for systemic drug delivery, with a focus on medicated chewing gums, medicated lollipops, and oral bioadhesive devices. The aim is to stimulate increased interest in the opportunities for innovative new products that are available to formulators in this field, particularly for atypical patient populations.

  3. INFORMATIONAL EFFECT OF A FORM

    Directory of Open Access Journals (Sweden)

    Kovalenko V.F.

    2016-02-01

    Full Text Available The study was conducted by method of light scattering of laser emission. The influence of the form field, mutual influence of mental informational and form torsional fields as well as the following exposure of water samples in the form field after the cease of informational influence on water structure were examined. Paper forms of a pyramid, a cylinder, and a prism were used. The experimental findings show that mechanism of mutual influence on water structure of the form and informational torsional fields depended on the initial conditions of spin restructuring process – the configuration of a form, the type of the form field (internal and external ones, and the initial water structure. The influence of the form field on informational aftereffect was determined, the character of which was defined by ratio of intensities of torsional form field and an informational soliton. The phenomenon of the abnormally large amplification of the informational aftereffect in the internal field of a pyramid demonstrating the attributes of positive reverse connection between the informational soliton and torsional field of water structure and selection of generated cluster sizes were discovered.

  4. NETWORK CODING BY BEAM FORMING

    DEFF Research Database (Denmark)

    2013-01-01

    Network coding by beam forming in networks, for example, in single frequency networks, can provide aid in increasing spectral efficiency. When network coding by beam forming and user cooperation are combined, spectral efficiency gains may be achieved. According to certain embodiments, a method...

  5. The nucleon's strange form factors

    International Nuclear Information System (INIS)

    Pitt, Mark L.

    2000-01-01

    Knowledge of the nucleon's strange form factors will provide valuable insight into low energy hadron structure. Measurement of the vector strange form factor of the nucleon is accomplished through parity-violating electron scattering. This paper reviews the current status of this class of experiments

  6. Automated Test-Form Generation

    Science.gov (United States)

    van der Linden, Wim J.; Diao, Qi

    2011-01-01

    In automated test assembly (ATA), the methodology of mixed-integer programming is used to select test items from an item bank to meet the specifications for a desired test form and optimize its measurement accuracy. The same methodology can be used to automate the formatting of the set of selected items into the actual test form. Three different…

  7. Topics on the FORM software; Topicos do software FORM

    Energy Technology Data Exchange (ETDEWEB)

    Costa Jorge, Patricia M. da; Peres, Patricia Duarte [Universidade Catolica de Petropolis, RJ (Brazil). Dept. de Ciencia da Computacao

    1997-06-01

    These notes studies the compilation with FORM software as applied to high energy physics, covering the following topics: Command structures, statistics and numbers, Dirac matrices, optimization control, Gamma matrices, errors and polynomial substitution

  8. Near net shape forming unsing semi-solid metal forming

    CSIR Research Space (South Africa)

    Govender, G

    2005-10-01

    Full Text Available is supplied in specific lengths , which means there would be additional scrap created by off cuts. • During reheating oxidation of the billet surface occurs therefore dies have to be designed to remove oxides during the forming process. • During... Absorption Process consistency 2005 Advantages of Using The SSM Forming Methods • High wall thicknesses and different wall thicknesses can be designed • Low gas porosity due to laminar filling and good airing • Low solidification porosity due...

  9. Differential forms theory and practice

    CERN Document Server

    Weintraub, Steven H

    2014-01-01

    Differential forms are utilized as a mathematical technique to help students, researchers, and engineers analyze and interpret problems where abstract spaces and structures are concerned, and when questions of shape, size, and relative positions are involved. Differential Forms has gained high recognition in the mathematical and scientific community as a powerful computational tool in solving research problems and simplifying very abstract problems through mathematical analysis on a computer. Differential Forms, 2nd Edition, is a solid resource for students and professionals needing a solid g

  10. Entropic Forms and Related Algebras

    Directory of Open Access Journals (Sweden)

    Antonio Maria Scarfone

    2013-02-01

    Full Text Available Starting from a very general trace-form entropy, we introduce a pair of algebraic structures endowed by a generalized sum and a generalized product. These algebras form, respectively, two Abelian fields in the realm of the complex numbers isomorphic each other. We specify our results to several entropic forms related to distributions recurrently observed in social, economical, biological and physical systems including the stretched exponential, the power-law and the interpolating Bosons-Fermions distributions. Some potential applications in the study of complex systems are advanced.

  11. Cold-formed steel design

    CERN Document Server

    Yu, Wei-Wen

    2010-01-01

    The definitive text in the field, thoroughly updated and expanded Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who design for and work with cold-formed steel. No other book provides such exhaustive coverage of both the theory and practice of cold-formed steel construction. Updated and expanded to reflect all the important developments that have occurred in the field over the past decade, this Fourth Edition of the classic text provides you with more of the detailed, up-to-the-minute techni

  12. Waste forms for plutonium disposition

    International Nuclear Information System (INIS)

    Johnson, S.G.; O'Holleran, T.P.; Frank, S.M.; Meyer, M.K.; Hanson, M.; Staples, B.A.; Knecht, D.A.; Kong, P.C.

    1997-01-01

    The field of plutonium disposition is varied and of much importance, since the Department of Energy has decided on the hybrid option for disposing of the weapons materials. This consists of either placing the Pu into mixed oxide fuel for reactors or placing the material into a stable waste form such as glass. The waste form used for Pu disposition should exhibit certain qualities: (1) provide for a suitable deterrent to guard against proliferation; (2) be of minimal volume, i.e., maximize the loading; and (3) be reasonably durable under repository-like conditions. This paper will discuss several Pu waste forms that display promising characteristics

  13. Methods of forming CIGS films

    Science.gov (United States)

    Mansfield, Lorelle; Ramanathan, Kannan

    2017-09-19

    Methods for forming CIGS films are provided. According to an aspect of the invention, a method of forming a CIGS film includes a precursor step, which includes simultaneously evaporating Cu, In, Ga, Se, and Sb onto a substrate. The Se is incident on the substrate at a rate of at least 20 .ANG./s. The method also includes a selenization step, which includes evaporating Se over the substrate after the precursor step.

  14. Positive geometries and canonical forms

    Science.gov (United States)

    Arkani-Hamed, Nima; Bai, Yuntao; Lam, Thomas

    2017-11-01

    Recent years have seen a surprising connection between the physics of scattering amplitudes and a class of mathematical objects — the positive Grassmannian, positive loop Grassmannians, tree and loop Amplituhedra — which have been loosely referred to as "positive geometries". The connection between the geometry and physics is provided by a unique differential form canonically determined by the property of having logarithmic singularities (only) on all the boundaries of the space, with residues on each boundary given by the canonical form on that boundary. The structures seen in the physical setting of the Amplituhedron are both rigid and rich enough to motivate an investigation of the notions of "positive geometries" and their associated "canonical forms" as objects of study in their own right, in a more general mathematical setting. In this paper we take the first steps in this direction. We begin by giving a precise definition of positive geometries and canonical forms, and introduce two general methods for finding forms for more complicated positive geometries from simpler ones — via "triangulation" on the one hand, and "push-forward" maps between geometries on the other. We present numerous examples of positive geometries in projective spaces, Grassmannians, and toric, cluster and flag varieties, both for the simplest "simplex-like" geometries and the richer "polytope-like" ones. We also illustrate a number of strategies for computing canonical forms for large classes of positive geometries, ranging from a direct determination exploiting knowledge of zeros and poles, to the use of the general triangulation and push-forward methods, to the representation of the form as volume integrals over dual geometries and contour integrals over auxiliary spaces. These methods yield interesting representations for the canonical forms of wide classes of positive geometries, ranging from the simplest Amplituhedra to new expressions for the volume of arbitrary convex

  15. Forms of Approximate Radiation Transport

    CERN Document Server

    Brunner, G

    2002-01-01

    Photon radiation transport is described by the Boltzmann equation. Because this equation is difficult to solve, many different approximate forms have been implemented in computer codes. Several of the most common approximations are reviewed, and test problems illustrate the characteristics of each of the approximations. This document is designed as a tutorial so that code users can make an educated choice about which form of approximate radiation transport to use for their particular simulation.

  16. Form 6 - gas balancing agreement

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    In 1988, a special Committee of the Rocky Mountain Mineral Law Foundation undertook a project to draft a model from gas balancing agreement. This project was initiated at the request of a number of Foundation members who felt that a model form gas balancing agreement would facilitate the negotiation of operating agreement, since gas balancing issues had become sticking points in the process. The Committee was composed of attorneys representing a wide cross-section of the oil and gas industry including both major and independent oil companies, production companies with interstate pipeline affiliates, and private practitioners. The Committee attempted to address the more controversial issues in gas balancing with optional provisions in the Form. To facilitate the negotiation process, the number of optional provisions was minimized. This form may be used as an Appendix to the new A.A.P.L. Form 610-1989 Model Form Operating Agreement. This book includes provision of this Form which are: Ownership of gas production; Balancing of production accounts; Cash balancing upon depletion; Deliverability tests; Nominations; Statements; Payment of taxes; Operating expenses; Overproducing allowable; Payment of leasehold burdens; Operator's liability; Successors and assigns; Audits; Arbitration; and Operator's fees

  17. SuperFormLab: showing SuperFormLab

    DEFF Research Database (Denmark)

    2013-01-01

    3D-printing in clay and ceramic objects shaped by your own sounds and movements! Digital form transferred via CNC-milling to ornamental ceramic wall-cladding. Brave New World… Students and their teacher at SuperFormLab, the new ceramic workshop of the School of Design at the Royal Danish Academy...... of Fine Arts in Copenhagen, will be showing results of their investigations into the potential of combining digital technologies with ceramic materials. It is now possible to shape the most complex mathematical, virtual 3D objects through the use of advanced software-programs. And more than that – you can...... now get these objects out of the computer and be able to hold and experience them with your hands. Even made in clay. At SuperFormLab, workshop for the new education in Ceramic Design at the School of Design, the integration of digital technologies in relation to the ceramic materials and techniques...

  18. The discovery of structural form.

    Science.gov (United States)

    Kemp, Charles; Tenenbaum, Joshua B

    2008-08-05

    Algorithms for finding structure in data have become increasingly important both as tools for scientific data analysis and as models of human learning, yet they suffer from a critical limitation. Scientists discover qualitatively new forms of structure in observed data: For instance, Linnaeus recognized the hierarchical organization of biological species, and Mendeleev recognized the periodic structure of the chemical elements. Analogous insights play a pivotal role in cognitive development: Children discover that object category labels can be organized into hierarchies, friendship networks are organized into cliques, and comparative relations (e.g., "bigger than" or "better than") respect a transitive order. Standard algorithms, however, can only learn structures of a single form that must be specified in advance: For instance, algorithms for hierarchical clustering create tree structures, whereas algorithms for dimensionality-reduction create low-dimensional spaces. Here, we present a computational model that learns structures of many different forms and that discovers which form is best for a given dataset. The model makes probabilistic inferences over a space of graph grammars representing trees, linear orders, multidimensional spaces, rings, dominance hierarchies, cliques, and other forms and successfully discovers the underlying structure of a variety of physical, biological, and social domains. Our approach brings structure learning methods closer to human abilities and may lead to a deeper computational understanding of cognitive development.

  19. Cells, walls, and endless forms.

    Science.gov (United States)

    Monniaux, Marie; Hay, Angela

    2016-12-01

    A key question in biology is how the endless diversity of forms found in nature evolved. Understanding the cellular basis of this diversity has been aided by advances in non-model experimental systems, quantitative image analysis tools, and modeling approaches. Recent work in plants highlights the importance of cell wall and cuticle modifications for the emergence of diverse forms and functions. For example, explosive seed dispersal in Cardamine hirsuta depends on the asymmetric localization of lignified cell wall thickenings in the fruit valve. Similarly, the iridescence of Hibiscus trionum petals relies on regular striations formed by cuticular folds. Moreover, NAC transcription factors regulate the differentiation of lignified xylem vessels but also the water-conducting cells of moss that lack a lignified secondary cell wall, pointing to the origin of vascular systems. Other novel forms are associated with modified cell growth patterns, including oriented cell expansion or division, found in the long petal spurs of Aquilegia flowers, and the Sarracenia purpurea pitcher leaf, respectively. Another good example is the regulation of dissected leaf shape in C. hirsuta via local growth repression, controlled by the REDUCED COMPLEXITY HD-ZIP class I transcription factor. These studies in non-model species often reveal as much about fundamental processes of development as they do about the evolution of form. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Pre-exposure to moving form enhances static form sensitivity.

    Directory of Open Access Journals (Sweden)

    Thomas S A Wallis

    Full Text Available BACKGROUND: Motion-defined form can seem to persist briefly after motion ceases, before seeming to gradually disappear into the background. Here we investigate if this subjective persistence reflects a signal capable of improving objective measures of sensitivity to static form. METHODOLOGY/PRINCIPAL FINDINGS: We presented a sinusoidal modulation of luminance, masked by a background noise pattern. The sinusoidal luminance modulation was usually subjectively invisible when static, but visible when moving. We found that drifting then stopping the waveform resulted in a transient subjective persistence of the waveform in the static display. Observers' objective sensitivity to the position of the static waveform was also improved after viewing moving waveforms, compared to viewing static waveforms for a matched duration. This facilitation did not occur simply because movement provided more perspectives of the waveform, since performance following pre-exposure to scrambled animations did not match that following pre-exposure to smooth motion. Observers did not simply remember waveform positions at motion offset, since removing the waveform before testing reduced performance. CONCLUSIONS/SIGNIFICANCE: Motion processing therefore interacts with subsequent static visual inputs in a way that can improve performance in objective sensitivity measures. We suggest that the brief subjective persistence of motion-defined forms that can occur after motion offsets is a consequence of the decay of a static form signal that has been transiently enhanced by motion processing.

  1. Form Filling with SCC in a Vertical Form

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm

    2004-01-01

    been produced. To improve identification of the flow (i.e. dead zones, plug flow, laminar flow, turbulent flow, blocking etc.) the form has one transparent acrylic plate and it has shown valuable to change between normal greyish concrete, and a pigmented (red) concrete during the filling process...

  2. Toroidal helical quartz forming machine

    International Nuclear Information System (INIS)

    Hanks, K.W.; Cole, T.R.

    1977-01-01

    The Scyllac fusion experimental machine used 10 cm diameter smooth bore discharge tubes formed into a simple toroidal shape prior to 1974. At about that time, it was discovered that a discharge tube was required to follow the convoluted shape of the load coil. A machine was designed and built to form a fused quartz tube with a toroidal shape. The machine will accommodate quartz tubes from 5 cm to 20 cm diameter forming it into a 4 m toroidal radius with a 1 to 5 cm helical displacement. The machine will also generate a helical shape on a linear tube. Two sets of tubes with different helical radii and wavelengths have been successfully fabricated. The problems encountered with the design and fabrication of this machine are discussed

  3. Amorphous drugs and dosage forms

    DEFF Research Database (Denmark)

    Grohganz, Holger; Löbmann, K.; Priemel, P.

    2013-01-01

    The transformation to an amorphous form is one of the most promising approaches to address the low solubility of drug compounds, the latter being an increasing challenge in the development of new drug candidates. However, amorphous forms are high energy solids and tend to recry stallize. New...... formulation principles are needed to ensure the stability of amorphous drug forms. The formation of solid dispersions is still the most investigated approach, but additional approaches are desirable to overcome the shortcomings of solid dispersions. Spatial separation by either coating or the use of micro......-containers has shown potential to prevent or delay recrystallization. Another recent approach is the formation of co-amorphous mixtures between either two drugs or one drug and one low molecular weight excipient. Molecular interactions between the two molecules provide an energy barrier that has to be overcome...

  4. New directions in Dirichlet forms

    CERN Document Server

    Jost, Jürgen; Mosco, Umberto; Rockner, Michael; Sturm, Karl-Theodor

    1998-01-01

    The theory of Dirichlet forms brings together methods and insights from the calculus of variations, stochastic analysis, partial differential and difference equations, potential theory, Riemannian geometry and more. This book features contributions by leading experts and provides up-to-date, authoritative accounts on exciting developments in the field and on new research perspectives. Topics covered include the following: stochastic analysis on configuration spaces, specifically a mathematically rigorous approach to the stochastic dynamics of Gibbs measures and infinite interacting particle systems; subelliptic PDE, homogenization, and fractals; geometric aspects of Dirichlet forms on metric spaces and function theory on such spaces; generalized harmonic maps as nonlinear analogues of Dirichlet forms, with an emphasis on non-locally compact situations; and a stochastic approach based on Brownian motion to harmonic maps and their regularity. Various new connections between the topics are featured, and it is de...

  5. Induction interview form in EDH

    CERN Multimedia

    Information technology Department, AIS (Administrative Information Services) Group

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of his taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction1) (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows.Information technology Department, AIS (Administrative Information Services) Group Human Re...

  6. Induction interview form in EDH

    CERN Multimedia

    Information technology Department, AIS (Administrative Information Services) Group,

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of him taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows. Information technology Department, AIS (Administrative Information Services) Group Human...

  7. Methods of forming boron nitride

    Science.gov (United States)

    Trowbridge, Tammy L; Wertsching, Alan K; Pinhero, Patrick J; Crandall, David L

    2015-03-03

    A method of forming a boron nitride. The method comprises contacting a metal article with a monomeric boron-nitrogen compound and converting the monomeric boron-nitrogen compound to a boron nitride. The boron nitride is formed on the same or a different metal article. The monomeric boron-nitrogen compound is borazine, cycloborazane, trimethylcycloborazane, polyborazylene, B-vinylborazine, poly(B-vinylborazine), or combinations thereof. The monomeric boron-nitrogen compound is polymerized to form the boron nitride by exposure to a temperature greater than approximately 100.degree. C. The boron nitride is amorphous boron nitride, hexagonal boron nitride, rhombohedral boron nitride, turbostratic boron nitride, wurzite boron nitride, combinations thereof, or boron nitride and carbon. A method of conditioning a ballistic weapon and a metal article coated with the monomeric boron-nitrogen compound are also disclosed.

  8. Mathematics and Forms of Life

    Directory of Open Access Journals (Sweden)

    Severin Schroeder

    2015-10-01

    Full Text Available According to Wittgenstein, mathematics is embedded in, and partly constituting, a form of life. Hence, to imagine different, alternative forms of elementary mathematics, we should have to imagine different practices, different forms of life in which they could play a role. If we tried to imagine a radically different arithmetic we should think either of a strange world (in which objects unaccountably vanish or appear or of people acting and responding in very peculiar ways. If such was their practice, a calculus expressing the norms of representation they applied could not be called false. Rather, our criticism could only be to dismiss such a practice as foolish and to dismiss their norms as too different from ours to be called ‘mathematics’.

  9. Differential forms on electromagnetic networks

    CERN Document Server

    Balasubramanian, N V; Sen Gupta, D P

    2013-01-01

    Differential Forms on Electromagnetic Networks deals with the use of combinatorial techniques in electrical circuit, machine analysis, and the relationship between circuit quantities and electromagnetic fields. The monograph is also an introduction to the organization of field equations by the methods of differential forms. The book covers topics such as algebraic structural relations in an electric circuit; mesh and node-pair analysis; exterior differential structures; generalized Stoke's theorem and tensor analysis; and Maxwell's electromagnetic equation. Also covered in the book are the app

  10. FORM version 4.0

    Science.gov (United States)

    Kuipers, J.; Ueda, T.; Vermaseren, J. A. M.; Vollinga, J.

    2013-05-01

    We present version 4.0 of the symbolic manipulation system FORM. The most important new features are manipulation of rational polynomials and the factorization of expressions. Many other new functions and commands are also added; some of them are very general, while others are designed for building specific high level packages, such as one for Gröbner bases. New is also the checkpoint facility, that allows for periodic backups during long calculations. Finally, FORM 4.0 has become available as open source under the GNU General Public License version 3. Program summaryProgram title: FORM. Catalogue identifier: AEOT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 151599 No. of bytes in distributed program, including test data, etc.: 1 078 748 Distribution format: tar.gz Programming language: The FORM language. FORM itself is programmed in a mixture of C and C++. Computer: All. Operating system: UNIX, LINUX, Mac OS, Windows. Classification: 5. Nature of problem: FORM defines a symbolic manipulation language in which the emphasis lies on fast processing of very large formulas. It has been used successfully for many calculations in Quantum Field Theory and mathematics. In speed and size of formulas that can be handled it outperforms other systems typically by an order of magnitude. Special in this version: The version 4.0 contains many new features. Most important are factorization and rational arithmetic. The program has also become open source under the GPL. The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes. Solution method: See "Nature of Problem", above. Additional comments: NOTE: The code in CPC is for reference. You are encouraged

  11. Auxin biosynthesis and storage forms

    Science.gov (United States)

    Strader, Lucia C.

    2013-01-01

    The plant hormone auxin drives plant growth and morphogenesis. The levels and distribution of the active auxin indole-3-acetic acid (IAA) are tightly controlled through synthesis, inactivation, and transport. Many auxin precursors and modified auxin forms, used to regulate auxin homeostasis, have been identified; however, very little is known about the integration of multiple auxin biosynthesis and inactivation pathways. This review discusses the many ways auxin levels are regulated through biosynthesis, storage forms, and inactivation, and the potential roles modified auxins play in regulating the bioactive pool of auxin to affect plant growth and development. PMID:23580748

  12. $K_{13}$ transition form factors

    CERN Document Server

    Chueng Ryong Ji

    2001-01-01

    The rainbow truncation of the quark Dyson-Schwinger equation is combined with the ladder Bethe-Salpeter equation for the meson bound state amplitudes and the dressed quark-W vertex in a manifestly covariant calculation of the K/sub l3/ transition form factors and decay width in the impulse approximation. With model gluon parameters previously fixed by the chiral condensate, the pion mass and decay constant, and the kaon mass, our results for the K/sub l3/ form factors and the kaon semileptonic decay width are in good agreement with the experimental data. (37 refs).

  13. Severe forms of food allergy

    Directory of Open Access Journals (Sweden)

    Emanuel Sarinho

    2017-11-01

    Conclusion: Severe food allergy may occur in the form of anaphylaxis and food‐protein‐induced enterocolitis syndrome, which are increasingly observed in the pediatric emergency room; hence, pediatricians must be alert so they can provide the immediate diagnosis and treatment.

  14. Spin-forming Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  15. Smooth functors vs. differential forms

    NARCIS (Netherlands)

    Schreiber, U.; Waldorf, K.

    2011-01-01

    We establish a relation between smooth 2-functors defined on the path 2-groupoid of a smooth manifold and differential forms on this manifold. This relation can be understood as a part of a dictionary between fundamental notions from category theory and differential geometry. We show that smooth

  16. Constitutive modelling for composite forming

    NARCIS (Netherlands)

    Akkerman, Remko; Lamers, E.A.D.; Long, A.C.

    2007-01-01

    Fibre reorientation occurs when forming a reinforced structure such as a fabric onto a doubly curved surface. This leads to a change in the angle between warp and fill yarns. The composite properties change inhomogeneously, corresponding to the varying angle between warp and fill yarns. Many

  17. Generalized forms and their applications

    CERN Document Server

    Nurowski, P

    2002-01-01

    The calculus of generalized p-forms, -1 <= p <= n, is developed further. On an n-dimensional manifold with metric, M, a (Hodge) star operator, inner product, co-differential and Laplacian operators are introduced. The inner product and Lie derivative with respect to vector fields on M are defined. Applications are made to Hamiltonian mechanics, field theories and Einstein's vacuum equations.

  18. Green Lubricants for Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels

    2010-01-01

    The increasing focus on legislation towards diminishing the impact on working environment as well as external environment has driven efforts to develop new, environmentally benign lubricants for metal forming. The present paper gives an overview of these efforts to substitute environmentally...

  19. New forms of quantum statistics

    International Nuclear Information System (INIS)

    Mishra, A.K.; Rajasekaran, G.

    1992-01-01

    A new two-parameter deformation of the algebra of creation and destruction operators, which allows the construction of a new family of Hillbert spaces with positive definite inner product is proposed. This provides a continuous interpolation between two new forms of statistics named orthofermi and orthobose statistics. Positivity of the inner product over the two-parameter region is discussed. (author). 8 refs

  20. Biofilm Growth and Fossil Form

    Directory of Open Access Journals (Sweden)

    A. P. Petroff

    2013-11-01

    Full Text Available Stromatolites can grow under the influence of microbial processes, but it is often unclear whether and how the macroscopic morphology of these rocks records biological processes. Conical stromatolites, which formed in the absence of sedimentation, provide a comparatively simple record of the interplay between microbial growth and lithification. Here, we show that the dynamics shaping conical stromatolites result from diffusive gradients within the overlying microbial mat. These gradients cause minerals to precipitate faster in regions of high curvature, resulting in measurable properties of the shapes of stromatolite laminas. This model allows us to estimate the thickness of ancient stromatolite-forming mats to be approximately 1  mm, consistent with modern systems. Proceeding from the assumption that the ubiquitous process of diffusion is recorded in the translating form of a stromatolite, we derive the shape of a diffusion-driven stromatolite. The conical morphology—a distinctive feature of stromatolites growing in the absence of sedimentation—arises from these dynamics. This form is quantitatively consistent with the shape of conical stromatolites that grew for more than 2.9×10^{9} yrs of Earth history.

  1. Collaborating with Forms in Nature

    Science.gov (United States)

    Castro, Aileen Pugliese

    2011-01-01

    Taking students outside is a great opportunity to make art. In this article, the author describes how her students collaborated with forms in nature to create their own visual structures to communicate ideas. This lesson can be done on the beach, in a sand box on the school playground, in grassy areas, or nature can even be brought into the…

  2. Fast form alpha-2-macroglobulin

    DEFF Research Database (Denmark)

    Biltoft, Daniel; Gram, Jørgen Brodersen; Larsen, Anette

    2017-01-01

    . In this study, we investigated whether an enzyme-linked immunosorbent assay (ELISA), that specifically measures the electrophoretic "fast form" of α2-macroglobulin (F-α2M), could be a sensitive and global marker for activation of calcium dependent and in-dependent proteases in plasma exposed to biomaterials...

  3. Fabrication Aware Form-finding

    DEFF Research Database (Denmark)

    Egholm Pedersen, Ole; Larsen, Niels Martin; Pigram, Dave

    2014-01-01

    This paper describes a design and construction method that combines two distinct material systems with fabrication aware form-finding and file-to-factory workflows. The method enables the fluent creation of complex materially efficient structures comprising high populations of geometrically uniqu...

  4. Technetium Immobilization Forms Literature Survey

    Energy Technology Data Exchange (ETDEWEB)

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  5. Education fees – New forms

    CERN Multimedia

    2015-01-01

    The application forms for the payment of education fees have been updated and are now available in the Admin e-guide (under the “Useful Documents” heading):   Payment of education fees (including language course fees) – AC12A (form to be used by staff members recruited before 1 January 2007, with the exception of former “local staff”).   Payment of education fees – AC12B (form to be used by staff members recruited on or after 1 January 2007, by fellows, scientific associates and guest professors and by former “local staff” whose contracts started before 1 January 2007). The Education Fees service will continue to accept the old forms until the end of the current academic year, i.e. until 31 August 2015. Members of the personnel are reminded that any false declaration or failure to declare information with a view to deceiving others or achieving a gain that would result in a financial loss for CERN or...

  6. Nanodiamond particles forming photonic structures

    International Nuclear Information System (INIS)

    Grichko, Varvara; Tyler, Talmage; Grishko, Victor I; Shenderova, Olga

    2008-01-01

    Colloid suspensions of irregularly shaped, highly charged detonation nanodiamond particles are found to have unexpected optical properties, similar to those of photonic crystals. This finding is all the more surprising since the particles used in this work are far more polydisperse than those typically forming photonic crystals. Intensely iridescent structures have been fabricated using the centrifugation of aqueous suspensions of nanodiamonds

  7. Nanodiamond particles forming photonic structures

    Energy Technology Data Exchange (ETDEWEB)

    Grichko, Varvara; Tyler, Talmage; Grishko, Victor I; Shenderova, Olga [International Technology Center, 8100 Brownleigh Drive, Suite 120, Raleigh, NC 27617 (United States)], E-mail: oshenderova@itc-inc.org

    2008-06-04

    Colloid suspensions of irregularly shaped, highly charged detonation nanodiamond particles are found to have unexpected optical properties, similar to those of photonic crystals. This finding is all the more surprising since the particles used in this work are far more polydisperse than those typically forming photonic crystals. Intensely iridescent structures have been fabricated using the centrifugation of aqueous suspensions of nanodiamonds.

  8. Process for forming sulfuric acid

    Science.gov (United States)

    Lu, Wen-Tong P.

    1981-01-01

    An improved electrode is disclosed for the anode in a sulfur cycle hydrogen generation process where sulfur dioxie is oxidized to form sulfuric acid at the anode. The active compound in the electrode is palladium, palladium oxide, an alloy of palladium, or a mixture thereof. The active compound may be deposited on a porous, stable, conductive substrate.

  9. Terra firma-forme dermatosis

    Directory of Open Access Journals (Sweden)

    Emel Erkek

    2012-01-01

    Full Text Available Terra firma-forme dermatosis is characterized by ′dirty′ brown-grey cutaneous patches and plaques that can simply be eradicated by forceful swabbing with alcohol pads. The pathogenesis has been attributed to abnormal and delayed keratinization. Although affected patients present with typical lesions, the disorder is not well-known by dermatologists. In this report, we describe two patients with terra firma-forme dermatosis in the setting of xerosis cutis and atopic dermatitis. From a clinical point of view, we lay emphasis on its unique expression and diagnosis/treatment. From a histological perspective, we highlight its resemblance to dermatosis neglecta and speculate on the role of ′neglect′ in a patient with seemingly adequate hygiene. The role of urea containing emollients in the development of this disorder remains to be determined.

  10. Strange mesonic transition form factor

    International Nuclear Information System (INIS)

    Goity, J.L.; Musolf, M.J.

    1996-01-01

    The strange-quark vector current ρ-to-π meson transition form factor is computed at one-loop order using strange meson intermediate states. A comparison is made with a φ-meson dominance model estimate. We find that one-loop contributions are comparable in magnitude to those predicted by φ-meson dominance. It is possible that the one-loop contribution can make the matrix element as large as those of the electromagnetic current mediating vector meson radiative decays. However, due to the quadratic dependence of the one-loop results on the hadronic form factor cutoff mass, a large uncertainty in the estimate of the loops is unavoidable. These results indicate that non-nucleonic strange quarks could contribute appreciable in moderate-parallel Q 2 parallel parity-violating electron-nucleus scattering measurements aimed at probing the strange-quark content of the nucleon. copyright 1996 The American Physical Society

  11. Unsplit bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A [Pleasanton, CA

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  12. The integral form of supergravity

    Energy Technology Data Exchange (ETDEWEB)

    Castellani, L. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); INFN - Sezione di Torino,via P. Giuria 1, 10125 Torino (Italy); Catenacci, R. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); Gruppo Nazionale di Fisica Matematica, INdAM,P.le Aldo Moro 5, 00185 Roma (Italy); Grassi, P.A. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); INFN - Sezione di Torino,via P. Giuria 1, 10125 Torino (Italy)

    2016-10-11

    By using integral forms we derive the superspace action of D=3,N=1 supergravity as an integral on a supermanifold. The construction is based on target space picture changing operators, here playing the rôle of Poincaré duals to the lower-dimensional spacetime surfaces embedded into the supermanifold. We show how the group geometrical action based on the group manifold approach interpolates between the superspace and the component supergravity actions, thus providing another proof of their equivalence.

  13. Recall in extensive form games

    OpenAIRE

    Klaus Ritzberger

    1999-01-01

    This paper considers characterizations of perfect recall in extensive form games. It is shown that perfect recall can be expressed in terms of choices without any reference to infomation sets. When information sets are taken into account, it is decomposable into an ordering of information sets and that players do not forget what they knew nor what they did. Thus, if information sets are partially ordered, then perfect recall is implied by the player's inability to refine her information from ...

  14. Benign bone-forming tumors

    International Nuclear Information System (INIS)

    Heuck, A.; Staebler, A.; Steinborn, M.; Woertler, K.

    2001-01-01

    Benign bone-forming tumors include osteomas, enostomas, osteoid osteomas, and osteoblastomas. These lesions are often characterized by typical imaging findings on radiographs, CT and MR imaging studies. Radiologic findings and additional clinical information allow for a specific diagnosis in most cases. This review article emphasizes the radiological patterns of benign boneforming tumors as well as their epidemiological, clinical, and pathological characteristics. In addition, minimally invasive interventional procedures for the therapy of osteoid osteoma are reviewed. (orig.) [de

  15. Terra firma-forme dermatosis.

    Science.gov (United States)

    Unal, Emine; Guarneri, Claudio; Chokoeva, Anastasiya Atanasova; Wollina, Uwe; Tchernev, Georgi

    2017-03-01

    Terra firma-forme dermatosis (TFFD) belongs to the group of "dirty dermatoses" and represents a not well-known and surely underestimated vexing skin condition. Firstly described by Duncan, Tschen and Knox in 1987, it accounts for a few case series in the literature and has a still undefined aetiology. The authors present an additional report of TFFD, occurring in a young Caucasian girl, and briefly review the current medical literature on the topic.

  16. Forming a multinational joint venture

    International Nuclear Information System (INIS)

    Bhatia, N.K.; Garb, R.H.; Statton, T.D.

    1990-01-01

    This paper discusses the basis and mechanics for forming a multinational joint venture. The topics of the paper include the motivations for a joint venture, selection of the appropriate co-venturer, management of the multinational joint venture, and the joint venture agreement. The authors state that a joint venture is not applicable or desirable in all instances and to be successful, must be carefully planned

  17. Modular forms a classical approach

    CERN Document Server

    Cohen, Henri

    2017-01-01

    The theory of modular forms is a fundamental tool used in many areas of mathematics and physics. It is also a very concrete and "fun" subject in itself and abounds with an amazing number of surprising identities. This comprehensive textbook, which includes numerous exercises, aims to give a complete picture of the classical aspects of the subject, with an emphasis on explicit formulas. After a number of motivating examples such as elliptic functions and theta functions, the modular group, its subgroups, and general aspects of holomorphic and nonholomorphic modular forms are explained, with an emphasis on explicit examples. The heart of the book is the classical theory developed by Hecke and continued up to the Atkin-Lehner-Li theory of newforms and including the theory of Eisenstein series, Rankin-Selberg theory, and a more general theory of theta series including the Weil representation. The final chapter explores in some detail more general types of modular forms such as half-integral weight, Hilbert, Jacob...

  18. Coated particle waste form development

    Energy Technology Data Exchange (ETDEWEB)

    Oma, K.H.; Buckwalter, C.Q.; Chick, L.A.

    1981-12-01

    Coated particle waste forms have been developed as part of the multibarrier concept at Pacific Northwest Laboratory under the Alternative Waste Forms Program for the Department of Energy. Primary efforts were to coat simulated nuclear waste glass marbles and ceramic pellets with low-temperature pyrolytic carbon (LT-PyC) coatings via the process of chemical vapor deposition (CVD). Fluidized bed (FB) coaters, screw agitated coaters (SAC), and rotating tube coaters were used. Coating temperatures were reduced by using catalysts and plasma activation. In general, the LT-PyC coatings did not provide the expected high leach resistance as previously measured for carbon alone. The coatings were friable and often spalled off the substrate. A totally different concept, thermal spray coating, was investigated at PNL as an alternative to CVD coating. Flame spray, wire gun, and plasma gun systems were evaluated using glass, ceramic, and metallic coating materials. Metal plasma spray coatings (Al, Sn, Zn, Pb) provided a two to three orders-of-magnitude increase in chemical durability. Because the aluminum coatings were porous, the superior leach resistance must be due to either a chemical interaction or to a pH buffer effect. Because they are complex, coated waste form processes rank low in process feasibility. Of all the possible coated particle processes, plasma sprayed marbles have the best rating. Carbon coating of pellets by CVD ranked ninth when compared with ten other processes. The plasma-spray-coated marble process ranked sixth out of eleven processes.

  19. Fuzzy logic of Aristotelian forms

    Energy Technology Data Exchange (ETDEWEB)

    Perlovsky, L.I. [Nichols Research Corp., Lexington, MA (United States)

    1996-12-31

    Model-based approaches to pattern recognition and machine vision have been proposed to overcome the exorbitant training requirements of earlier computational paradigms. However, uncertainties in data were found to lead to a combinatorial explosion of the computational complexity. This issue is related here to the roles of a priori knowledge vs. adaptive learning. What is the a-priori knowledge representation that supports learning? I introduce Modeling Field Theory (MFT), a model-based neural network whose adaptive learning is based on a priori models. These models combine deterministic, fuzzy, and statistical aspects to account for a priori knowledge, its fuzzy nature, and data uncertainties. In the process of learning, a priori fuzzy concepts converge to crisp or probabilistic concepts. The MFT is a convergent dynamical system of only linear computational complexity. Fuzzy logic turns out to be essential for reducing the combinatorial complexity to linear one. I will discuss the relationship of the new computational paradigm to two theories due to Aristotle: theory of Forms and logic. While theory of Forms argued that the mind cannot be based on ready-made a priori concepts, Aristotelian logic operated with just such concepts. I discuss an interpretation of MFT suggesting that its fuzzy logic, combining a-priority and adaptivity, implements Aristotelian theory of Forms (theory of mind). Thus, 2300 years after Aristotle, a logic is developed suitable for his theory of mind.

  20. Coated particle waste form development

    International Nuclear Information System (INIS)

    Oma, K.H.; Buckwalter, C.Q.; Chick, L.A.

    1981-12-01

    Coated particle waste forms have been developed as part of the multibarrier concept at Pacific Northwest Laboratory under the Alternative Waste Forms Program for the Department of Energy. Primary efforts were to coat simulated nuclear waste glass marbles and ceramic pellets with low-temperature pyrolytic carbon (LT-PyC) coatings via the process of chemical vapor deposition (CVD). Fluidized bed (FB) coaters, screw agitated coaters (SAC), and rotating tube coaters were used. Coating temperatures were reduced by using catalysts and plasma activation. In general, the LT-PyC coatings did not provide the expected high leach resistance as previously measured for carbon alone. The coatings were friable and often spalled off the substrate. A totally different concept, thermal spray coating, was investigated at PNL as an alternative to CVD coating. Flame spray, wire gun, and plasma gun systems were evaluated using glass, ceramic, and metallic coating materials. Metal plasma spray coatings (Al, Sn, Zn, Pb) provided a two to three orders-of-magnitude increase in chemical durability. Because the aluminum coatings were porous, the superior leach resistance must be due to either a chemical interaction or to a pH buffer effect. Because they are complex, coated waste form processes rank low in process feasibility. Of all the possible coated particle processes, plasma sprayed marbles have the best rating. Carbon coating of pellets by CVD ranked ninth when compared with ten other processes. The plasma-spray-coated marble process ranked sixth out of eleven processes

  1. Organizational forms and knowledge absorption

    Directory of Open Access Journals (Sweden)

    Radovanović Nikola

    2016-01-01

    Full Text Available Managing the entire portion of knowledge in an organization is a challenging task. At the organizational level, there can be enormous quantities of unknown, poorly valued or inefficiently applied knowledge. This is normally followed with the underdeveloped potential or inability of organizations to absorb knowledge from external sources. Facilitation of the efficient internal flow of knowledge within the established communication network may positively affect organizational capacity to absorb or identify, share and subsequently apply knowledge to commercial ends. Based on the evidences that the adoption of different organizational forms affects knowledge flows within an organization, this research analyzed the relationship between common organizational forms and absorptive capacity of organizations. In this paper, we test the hypothesis stating that the organizational structure affects knowledge absorption and exploitation in the organization. The methodology included quantitative and qualitative research method based on a questionnaire, while the data has been statistically analyzed and the hypothesis has been tested with the use of cross-tabulation and chi-square tests. The findings suggest that the type of organizational form affects knowledge absorption capacity and that having a less formalized and more flexible structure in an organization increases absorbing and exploiting opportunities of potentially valuable knowledge.

  2. EM Form Factors and OLYMPUS

    Directory of Open Access Journals (Sweden)

    Kohl Michael

    2014-01-01

    Full Text Available The elastic form factors of the nucleon characterize the distributions of charge and magnetization in momentum space and are important input for calculations of strong interaction phenomena and nuclear structure. The dramatic discrepancy in the observed ratio of elastic proton form factors between the Rosenbluth separation and polarization transfer methods has invoked numerous theoretical and experimental investigations. The previously neglected effect from two-photon exchange has become the favored explanation for the discrepancy. While the effect can not be calculated from first principles, it can be verified experimentally in several ways, most stringently by comparing the positron- proton and electron-proton elastic cross sections. The OLYMPUS experiment at DESY has been carried out to quantify the effect of two-photon exchange using intense stored positron and electron beams along with an internal unpolarized hydrogen target and a large acceptance detector to measure the ratio of the positron-proton and electron-proton elastic scattering cross sections. The status of proton form factor measurements and of the experimental efforts to verify the effect of two-photon exchange is presented, with some emphasis on the OLYMPUS experiment.

  3. CERAMIC WASTE FORM DATA PACKAGE

    Energy Technology Data Exchange (ETDEWEB)

    Amoroso, J.; Marra, J.

    2014-06-13

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  4. Survey of concrete waste forms

    International Nuclear Information System (INIS)

    Moore, J.G.

    1981-01-01

    The incorporation of radioactive waste in cement has been widely studied for many years. It has been routinely used at nuclear research and production sites for some types of nuclear waste for almost three decades and at power reactor plants for nearly two decades. Cement has many favorable characteristics that have contributed to its popularity. It is a readily available material and has not required complex and/or expensive equipment to solidify radioactive waste. The resulting solid products are noncombustible, strong, radiation resistant, and have reasonable chemical and thermal stability. As knowledge increased on the possible dangers from radioactive waste, requirements for waste fixation became more stringent. A brief survey of some of the research efforts used to extend and improve cementitious waste hosts to meet these requirements is given in this paper. Selected data are presented from the rather extensive study of the applicability of concrete as a waste form for Savannah River defense waste and the use of polymer impregnation to reduce the leachability and improve the durability of such waste forms. Hot-pressed concretes that were developed as prospective host solids for high-level wastes are described. Highlights are given from two decades of research on cementitious waste forms at Oak Ridge National Laboratory. The development of the hydrofracture process for the disposal of all locally generated radioactive waste led to a process for the disposal of I-129 and to the current research on the German in-situ solidification process for medium-level waste and the Oak Ridge FUETAP process for all classes of waste including commercial and defense high-level wastes. Finally, some of the more recent ORNL concepts are presented for the use of cement in the disposal of inorganic and biological sludges, waste inorganic salts, trash, and krypton

  5. How Do Atmospheric Rivers Form?

    Science.gov (United States)

    Dacre, H.; Martinez-Alvarado, O.; Clark, P. A.; Stringer, M. A.; Lavers, D.

    2017-12-01

    The term "atmospheric river" is used to describe corridors of strong water vapor transport in the troposphere. Filaments of enhanced water vapor, commonly observed in satellite imagery extending from the subtropics to the extratropics, are routinely used as a proxy for identifying these regions of strong water vapor transport. The precipitation associated with these filaments of enhanced water vapor can lead to high-impact flooding events. However, there remains some debate as to how these filaments form. In this study, the authors analyze the transport of water vapor within a climatology of wintertime North Atlantic extratropical cyclones. Results show that atmospheric rivers are formed by the cold front that sweeps up water vapor in the warm sector as it catches up with the warm front. This causes a narrow band of high water vapor content to form ahead of the cold front at the base of the warm conveyor belt airflow. Thus, water vapor in the cyclone's warm sector, not long-distance transport of water vapor from the subtropics, is responsible for the generation of filaments of high water vapor content. A continuous cycle of evaporation and moisture convergence within the cyclone replenishes water vapor lost via precipitation. Thus, rather than representing a direct and continuous feed of moist air from the subtropics into the center of a cyclone (as suggested by the term "atmospheric river"), these filaments are, in fact, the result of water vapor exported from the cyclone, and thus they represent the footprints left behind as cyclones travel poleward from the subtropics.

  6. [Terra firma-forme dermatosis].

    Science.gov (United States)

    Pallure, V; Ameline, M; Plantin, P; Bessis, D

    2013-11-01

    Terra firma-forme (i.e. resembling dry earth) is a condition chiefly affecting children wrongly considered as dermatosis arising out of negligence and inadequate corporal hygiene. It is in fact an acquired and asymptomatic grey-brown hyperpigmentation of the skin that persists despite normal washing with soap and water, but which subsides on rubbing with isopropyl alcohol 70%. Herein we report 10 new cases of this disorder. Ten patients aged between 7 months in 17 years were seen for acquired macular skin pigmentation, either brown or grey, fragmented and confluent. In six patients, this abnormality was the main reason for the consultation, generally on aesthetic grounds, and more rarely for diagnosis or suspicion of acanthosis nigricans. In all cases, questioning revealed normal hygiene measures. The condition comprised macular or acquired papular pigmentation, either brown or grey, of bilateral and symmetrical disposition and electively affecting the neck, trunk and retro-malleolar area of the ankles. Clinical examination together with a test involving rubbing with isopropyl alcohol 70° confirmed the diagnosis, revealing healthy underlying skin. Terra firma-forme dermatosis is frequently seen in clinical practice but is largely ignored in the French literature, possibly because of relevant indifference towards the condition. It affects both sexes equally, with no predilection for age or ethnicity, although it is classically seen to a greater extent during adolescence. Diagnosis of the condition, which is easily made thanks to the hyperpigmentation of dirty brown appearance on the neck and the ankles in particular, should not mislead the practitioner into blaming patients for supposedly deficient body hygiene. Knowledge of this form of dermatosis is useful because of its potentially harmful aesthetic and social effects, despite the ease of treatment by insistent rubbing of the affected areas with medical alcohol or ether. Early recognition also avoids pointless

  7. Pion form factor in QCD

    International Nuclear Information System (INIS)

    Radyushkin, A.V.

    1980-01-01

    The calculation of the next-to-leading order corrections to pion form factor Fsub(π)(Q) in the QCD shows that analysis of Fsub(π)(Q) is not a short-distance problem up to Q 2 =10 4 -10 6 GeV 2 . A QCD-inspired model is proposed which in a semi-phenomenological way, takes into account the most important confinement effects. The curve obtained for Fsub(π)(Q) is in good agreement with existing experimental data

  8. The forgotten form of knowledge

    DEFF Research Database (Denmark)

    Worsøe-Schmidt, Lisbeth

    The forgotten form of knowledge: Similarities between early 18th century Danish journals and nowadays Facebook discourse. Contemplating the early display of the public sphere in the 18th century, one is struck by the ease with which participants conduct themselves within the emerging institution...... the answer through a dual analytical strategy, first an examination of the conceptions of reason, emotion and morality introduced by early Danish journals and second, a sociohistorical study of authors and editors of the journals. The theoretical standpoint is the intersection between theory on the public...

  9. The Textile Form of Sound

    DEFF Research Database (Denmark)

    Bendixen, Cecilie

    of sound. This issue is a part of a Ph.D. study at The Danish Design School in Copenhagen. Sound diffusion in architecture is a complex phenomenon. From the sound source the sound spreads in all directions as a sphere of wave fronts. When the sound is reflected from room boundaries or furniture, complex......Sound is a part of architecture, and sound is complex. Upon this, sound is invisible. How is it then possible to design visual objects that interact with the sound? This paper addresses the problem of how to get access to the complexity of sound and how to make textile material revealing the form...

  10. Terra Firma-forme Dermatosis

    Directory of Open Access Journals (Sweden)

    Anagha Ramesh Babu

    2013-01-01

    Full Text Available Terra firma-forme dermatosis is a cutaneous discoloration. ‘Dirty’ brown grey cutaneous patches and plaques that can be rid off by forceful swabbing with alcohol pads characterize it. The pathogenesis has been attributed to abnormal and delayed keratinization. It poses no medical threat. A 40-year-old male patient presented to the Department of Dermatology with a 2-3 month history of persistent pigmented patches on both upper arms. The lesions were not associated with itching or burning sensation. He gives no history of exacerbation on exposure to the sun.

  11. Emerging Forms of Cultural Capital

    DEFF Research Database (Denmark)

    Prieur, Annick; Savage, Mike

    2013-01-01

    This paper takes stock of recent research on patterns of cultural engagement in various European nations, with specific reference to British and Danish research. It argues that Bourdieu's original theorisation of cultural capital in ‘Distinction’ needs to be significantly updated to register...... the decline of ‘highbrow’ culture which these studies reveal. However, we argue that this shift does not entail the erosion of cultural capital itself, or the rise of the ‘cultural omnivore’, so much as the emergence of a form of ‘cosmopolitan cultural capital’. We argue that this emerging cultural capital...

  12. Fabrication Aware Form-finding

    DEFF Research Database (Denmark)

    Egholm Pedersen, Ole; Larsen, Niels Martin; Pigram, Dave

    2014-01-01

    parts. The first material system employs a novel rotated joint design to allow the structural tuning of quasi-reciprocal timber frame elements fabricated from multi-axis machined plywood sheet stock. The second em-loys discontinuous post-tensioning to assemble unique precast concrete components......This paper describes a design and construction method that combines two distinct material systems with fabrication aware form-finding and file-to-factory workflows. The method enables the fluent creation of complex materially efficient structures comprising high populations of geometrically unique...

  13. Theoretical mechanics for sixth forms

    CERN Document Server

    Plumpton, C

    1971-01-01

    Theoretical Mechanics for Sixth Forms, Second Edition is a 14-chapter book that begins by elucidating the nature of theoretical mechanics. The book then describes the statics of a particle in illustration of the techniques of handling vector quantities. Subsequent chapters focus on the principle of moments, parallel forces and centers of gravity; and the application of Newton's second law to the dynamics of a particle and the ideas of work and energy, impulse and momentum, and power. The concept of friction is also explained. This volume concludes with chapters concerning motion in a circle an

  14. Spectroscopic Studies of Carotenoid-to-Bacteriochlorophyll Energy Transfer in LHRC Photosynthetic Complex from Roseiflexus castenholzii

    Energy Technology Data Exchange (ETDEWEB)

    Niedzwiedzki, Dariusz [Washington Univ., St. Louis, MO (United States); Collins, Aaron M. [Washington Univ., St. Louis, MO (United States); LaFountain, Amy M. [Univ. of Connecticut, Storrs, CT (United States); Enriquez, Miriam M. [Univ. of Connecticut, Storrs, CT (United States); Frank, Harry A. [Washington Univ., St. Louis, MO (United States); Blankenship, R. E. [Washington Univ., St. Louis, MO (United States)

    2010-06-14

    Carotenoids present in the photosynthetic light-harvesting reaction center (LHRC) complex from chlorosome lacking filamentous anoxygenic phototroph, Roseiflexus castenholzii were purified and characterized for their photochemical properties. The LHRC from anaerobically grown cells contains five different carotenoids, methoxy-keto-myxocoxanthin, γ-carotene, and its three derivatives, whereas the LHRC from aerobically grown cells contains only three carotenoid pigments with methoxy-keto-myxocoxanthin being the dominant one. The spectroscopic properties and dynamics of excited singlet states of the carotenoids were studied by steady-state absorption, fluorescence and ultrafast time-resolved optical spectroscopy in organic solvent and in the intact LHRC complex. Time-resolved transient absorption spectroscopy performed in the near-infrared (NIR) on purified carotenoids combined with steady-state absorption spectroscopy led to the precise determination of values of the energies of the S1(21Ag-) excited state. Global and single wavelength fitting of the ultrafast spectral and temporal data sets of the carotenoids in solvents and in the LHRC revealed the pathways of de-excitation of the carotenoid excited states.

  15. Mutational analysis of three bchH paralogs in (bacterio-)chlorophyll biosynthesis in Chlorobaculum tepidum

    DEFF Research Database (Denmark)

    Gomez Maqueo Chew, Aline; Frigaard, Niels-Ulrik; Bryant, Donald A

    2009-01-01

    unsuccessful. This result suggested that BchT alone is unable to support the minimal (B)Chl synthesis requirements of cells required for viability. The pigment compositions of the various mutant strains varied significantly. The BChl c content of the bchS mutant was only approximately 10% of that of the wild...

  16. Diel changes in bacteriochlorophyll a concentration suggest rapid bacterioplankton cycling in the Baltic Sea

    Czech Academy of Sciences Publication Activity Database

    Koblížek, Michal; Ston-Egiert, J.; Sagan, S.; Kolber, Z. S.

    2005-01-01

    Roč. 51, - (2005), s. 353-361 ISSN 0168-6496 R&D Projects: GA ČR GP206/03/P079; GA MŠk LN00A141 Institutional research plan: CEZ:AV0Z5020903 Keywords : Aerobic anoxygenic photoheterotrophs * Bacterial mortality * Bacterioplankton turnover Subject RIV: EE - Microbiology, Virology Impact factor: 2.787, year: 2005

  17. Beta-carotene to bacteriochlorophyll-c energy transfer in self-assembled aggregates mimicking chlorosomes

    Czech Academy of Sciences Publication Activity Database

    Alster, J.; Polívka, Tomáš; Arellano, J.B.; Chábera, P.; Vácha, František; Pšenčík, J.

    2010-01-01

    Roč. 373, 1-2 (2010), s. 90-97 ISSN 0301-0104 R&D Projects: GA ČR GA206/09/0375 Institutional research plan: CEZ:AV0Z50510513 Keywords : carotenoids * chlorosomes * energy transfer Subject RIV: BO - Biophysics Impact factor: 2.017, year: 2010

  18. Form finding in elastic gridshells

    Science.gov (United States)

    Baek, Changyeob; Sageman-Furnas, Andrew O.; Jawed, Mohammad K.; Reis, Pedro M.

    2018-01-01

    Elastic gridshells comprise an initially planar network of elastic rods that are actuated into a shell-like structure by loading their extremities. The resulting actuated form derives from the elastic buckling of the rods subjected to inextensibility. We study elastic gridshells with a focus on the rational design of the final shapes. Our precision desktop experiments exhibit complex geometries, even from seemingly simple initial configurations and actuation processes. The numerical simulations capture this nonintuitive behavior with excellent quantitative agreement, allowing for an exploration of parameter space that reveals multistable states. We then turn to the theory of smooth Chebyshev nets to address the inverse design of hemispherical elastic gridshells. The results suggest that rod inextensibility, not elastic response, dictates the zeroth-order shape of an actuated elastic gridshell. As it turns out, this is the shape of a common household strainer. Therefore, the geometry of Chebyshev nets can be further used to understand elastic gridshells. In particular, we introduce a way to quantify the intrinsic shape of the empty, but enclosed regions, which we then use to rationalize the nonlocal deformation of elastic gridshells to point loading. This justifies the observed difficulty in form finding. Nevertheless, we close with an exploration of concatenating multiple elastic gridshell building blocks.

  19. Special Geometry and Automorphic Forms

    CERN Document Server

    Berglund, P; Wyllard, N; Berglund, Per; Henningson, Mans; Wyllard, Niclas

    1997-01-01

    We consider special geometry of the vector multiplet moduli space in compactifications of the heterotic string on $K3 \\times T^2$ or the type IIA string on $K3$-fibered Calabi-Yau threefolds. In particular, we construct a modified dilaton that is invariant under $SO(2, n; Z)$ T-duality transformations at the non-perturbative level and regular everywhere on the moduli space. The invariant dilaton, together with a set of other coordinates that transform covariantly under $SO(2, n; Z)$, parameterize the moduli space. The construction involves a meromorphic automorphic function of $SO(2, n; Z)$, that also depends on the invariant dilaton. In the weak coupling limit, the divisor of this automorphic form is an integer linear combination of the rational quadratic divisors where the gauge symmetry is enhanced classically. We also show how the non-perturbative prepotential can be expressed in terms of meromorphic automorphic forms, by expanding a T-duality invariant quantity both in terms of the standard special coord...

  20. AMERICAN QUARTER HORSES’ BEHAVIORAL FORMS

    Directory of Open Access Journals (Sweden)

    Iryna Olexandrivna Suprun

    2016-02-01

    Full Text Available The review of basic literary sources is made out of behavior of horse. On the basis of the field researches (visual supervisions after three different aged groups of mares it is built ethograms. An ethogram of behavioral forms among mares was developed. They represent the different forms of mares’ behavior in a dynamics. The reaction of mares of the different age-related and physiology groups on appearance of extraneous objects on a pasture, their activity, hierarchy, socialization is analyzed in groups. Several main studies on equines were reviewed in ethogram. Four objects were placed into the pasture with the mares and foals including a mat, cone, halter, and mounting block. Initial interest of mares in objects was high. Herd mentality highly evident. When one horse spooked at object the whole herd followed. After 5 minutes, majority of mares and foals lose interest in objects. The major general behavior categories observed include: locomotion, comfort, and harem social. Dominance was demonstrated while looking at the objects. Dominance was also demonstrated when a mare wanted to be in a specific place or play with a specific toy, she would pin her ears back, bite, or kick at the other mare. 

  1. Severe forms of food allergy.

    Science.gov (United States)

    Sarinho, Emanuel; Lins, Maria das Graças Moura

    To guide the diagnostic and therapeutic management of severe forms of food allergy. Search in the Medline database using the terms "severe food allergy," "anaphylaxis and food allergy," "generalized urticaria and food allergy," and "food protein-induced enterocolitis syndrome" in the last ten years, searching in the title, abstract, or keyword fields. Food allergy can be serious and life-threatening. Milk, eggs, peanuts, nuts, walnuts, wheat, sesame seeds, shrimp, fish, and fruit can precipitate allergic emergencies. The severity of reactions will depend on associated cofactors such as age, drug use at the onset of the reaction, history and persistence of asthma and/or severe allergic rhinitis, history of previous anaphylaxis, exercise, and associated diseases. For generalized urticaria and anaphylaxis, intramuscular epinephrine is the first and fundamental treatment line. For the treatment in acute phase of food-induced enterocolitis syndrome in the emergency setting, prompt hydroelectrolytic replacement, administration of methylprednisolone and ondansetron IV are necessary. It is important to recommend to the patient with food allergy to maintain the exclusion diet, seek specialized follow-up and, in those who have anaphylaxis, to emphasize the need to carry epinephrine. Severe food allergy may occur in the form of anaphylaxis and food-protein-induced enterocolitis syndrome, which are increasingly observed in the pediatric emergency room; hence, pediatricians must be alert so they can provide the immediate diagnosis and treatment. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  2. Nuclear waste forms for actinides

    Science.gov (United States)

    Ewing, Rodney C.

    1999-01-01

    The disposition of actinides, most recently 239Pu from dismantled nuclear weapons, requires effective containment of waste generated by the nuclear fuel cycle. Because actinides (e.g., 239Pu and 237Np) are long-lived, they have a major impact on risk assessments of geologic repositories. Thus, demonstrable, long-term chemical and mechanical durability are essential properties of waste forms for the immobilization of actinides. Mineralogic and geologic studies provide excellent candidate phases for immobilization and a unique database that cannot be duplicated by a purely materials science approach. The “mineralogic approach” is illustrated by a discussion of zircon as a phase for the immobilization of excess weapons plutonium. PMID:10097054

  3. Innovative forms of citizen participation

    DEFF Research Database (Denmark)

    Nyseth, Torill; Ringholm, Toril; Agger, Annika

    Formal procedures of citizen participation in planning and urban governance in Norway and Denmark share many similarities. Although the planning laws are intended to give all affected stakeholders a chance to air their concerns within a limited time frame, then few use these channels for voice......: What characterises the new and innovative forms of citizen participation in urban planning in terms of innovation? And in what ways and to what degree is input from these processes fed into the formal planning processes? Theoretically, the paper is inspired by the concept of: ‘planning...... as experimentation’ (Hillier 2007, Nyseth et al 2010), ‘co-creation’ (Voorberg m.fl. 2013), and of the approach to participation offered by Clarke et al. (2014), where the traditional approaches are questioned and a contextualised approach is offered. Empirically, the paper draws on two different cases from Denmark...

  4. Emerging Forms of Cultural Capital

    DEFF Research Database (Denmark)

    Prieur, Annick; Savage, Mike

    - the claims that there are forms of emotional, subcultural or national cultural capital at work - The claim about cosmopolitanism or an international orientation as a distinctive feature of the culturally privileged classes The paper responds to the first theme announced in the call for this conference......This paper reviews recent European studies to assess whether cultural capital now has the same characteristics – or may be rather the same functions - as when Distinction was written. The paper will examine empirical applications of the concept of cultural capital in leading European studies...... – and hence are highly appropriate for direct comparisons with that study. This paper will begin by raising general issues regarding the meaning of the concept, and about how one may make assessments and claims about cultural capital. Here we consider how the legitimacy of certain cultural competencies...

  5. Miscellaneous Waste-Form FEPs

    International Nuclear Information System (INIS)

    Schenker, A.

    2000-01-01

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs

  6. The Textile Form of Sound

    DEFF Research Database (Denmark)

    Bendixen, Cecilie

    three-dimensional geometries of interfering spheres are created. Textiles are generally a very good sound dampening material. To dampen the sound most effective it should be placed where the sound energy is highest. To find these invisible spots of energy and to reveal the geometry of them, two......Sound is a part of architecture, and sound is complex. Upon this, sound is invisible. How is it then possible to design visual objects that interact with the sound? This paper addresses the problem of how to get access to the complexity of sound and how to make textile material revealing the form...... of sound. This issue is a part of a Ph.D. study at The Danish Design School in Copenhagen. Sound diffusion in architecture is a complex phenomenon. From the sound source the sound spreads in all directions as a sphere of wave fronts. When the sound is reflected from room boundaries or furniture, complex...

  7. Waste form development/test

    International Nuclear Information System (INIS)

    Kalb, P.D.; Colombo, P.

    1983-01-01

    The main objective of this study is to investigate new solidification agents relative to their potential application to wastes generated by advanced high volume reduction technologies, e.g., incinerator ash, dry solids, and ion exchange resins. Candidate materials selected for the solidification of these wastes include a modified sulfur cement and low-density polyethylene, neither of which are currently employed commerically for the solidification of low-level waste (LLW). As both the modified sulfur cement and the polyethylene are thermoplastic materials, a heated screw type extruder is utilized in the production of waste form samples for testing and evaluation. In this regard, work is being conducted to determine the range of conditions under which these solidification agents can be satisfactorily applied to the specific LLW streams and to provide information relevant to operating parameters and process control

  8. [Familial form of rheumatoid nodulosis].

    Science.gov (United States)

    Bosser, H; Schubert, B; Grosshans, E

    1993-01-01

    We report a familial form of rheumatoid nodulosis where the early lesions appeared in the first years of life in a young man and his son. The numerous papular and nodular skin lesions disclosed an ulcerative evolution leaving atrophic scars mainly near the limbs' joints. In both patients the evolution was characterized by the late onset of polyarthralgias and of a non-destructive seronegative polyarthritis; intra-osseous lesions were present in the metatarsal bones in the father. Rheumatoid nodulosis is a rare disease, sometimes considered as a benign variant of rheumatoid arthritis without destructive joint involvement. A serum rheumatoid factor is inconstantly present and the intra-osseous geodes have been shown to be rheumatoid nodules exhibiting the same histological structures of palisading granulomas as the subcutaneous nodules. The main symptom of the disease is the occurrence of multiple nodules followed by the delayed onset of a polyarthritis with a benign course without systemic involvement.

  9. Forms and Linear Network Codes

    DEFF Research Database (Denmark)

    Hansen, Johan P.

    We present a general theory to obtain linear network codes utilizing forms and obtain explicit families of equidimensional vector spaces, in which any pair of distinct vector spaces intersect in the same small dimension. The theory is inspired by the methods of the author utilizing the osculating...... spaces of Veronese varieties. Linear network coding transmits information in terms of a basis of a vector space and the information is received as a basis of a possibly altered vector space. Ralf Koetter and Frank R. Kschischang introduced a metric on the set af vector spaces and showed that a minimal...... distance decoder for this metric achieves correct decoding if the dimension of the intersection of the transmitted and received vector space is sufficiently large. The vector spaces in our construction are equidistant in the above metric and the distance between any pair of vector spaces is large making...

  10. Severe forms of food allergy

    Directory of Open Access Journals (Sweden)

    Emanuel Sarinho

    Full Text Available Abstract Objectives: To guide the diagnostic and therapeutic management of severe forms of food allergy. Data sources: Search in the Medline database using the terms “severe food allergy,” “anaphylaxis and food allergy,” “generalized urticaria and food allergy,” and “food protein-induced enterocolitis syndrome” in the last ten years, searching in the title, abstract, or keyword fields. Summary of data: Food allergy can be serious and life-threatening. Milk, eggs, peanuts, nuts, walnuts, wheat, sesame seeds, shrimp, fish, and fruit can precipitate allergic emergencies. The severity of reactions will depend on associated cofactors such as age, drug use at the onset of the reaction, history and persistence of asthma and/or severe allergic rhinitis, history of previous anaphylaxis, exercise, and associated diseases. For generalized urticaria and anaphylaxis, intramuscular epinephrine is the first and fundamental treatment line. For the treatment in acute phase of food-induced enterocolitis syndrome in the emergency setting, prompt hydroelectrolytic replacement, administration of methylprednisolone and ondansetron IV are necessary. It is important to recommend to the patient with food allergy to maintain the exclusion diet, seek specialized follow-up and, in those who have anaphylaxis, to emphasize the need to carry epinephrine. Conclusion: Severe food allergy may occur in the form of anaphylaxis and food-protein-induced enterocolitis syndrome, which are increasingly observed in the pediatric emergency room; hence, pediatricians must be alert so they can provide the immediate diagnosis and treatment.

  11. 16 CFR 455.3 - Window form.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Window form. 455.3 Section 455.3 Commercial... Window form. (a) Form given to buyer. Give the buyer of a used vehicle sold by you the window form...) Incorporated into contract. The information on the final version of the window form is incorporated into the...

  12. Dosage form design and development.

    Science.gov (United States)

    Allen, Loyd V

    2008-11-01

    Drugs must be properly formulated for administration to patients, regardless of age. Pediatric patients provide some additional challenges to the formulator in terms of compliance and therapeutic efficacy. Due to the lack of sufficient drug products for the pediatric population, the pharmaceutical industry and compounding pharmacies must develop and provide appropriate medications designed for children. The purpose of this article was to review the physical, chemical, and biological characteristics of drug substances and pharmaceutical ingredients to be used in preparing a drug product. In addition, stability, appearance, palatability, flavoring, sweetening, coloring, preservation, packaging, and storage are discussed. Information for the current article was gathered from a literature review; from presentations at professional and technical meetings; and from lectures, books, and publications of the author, as well as from his professional experience. Professional society meetings and standards-setting bodies were also used as a resource. The proper design and formulation of a dosage form requires consideration of the physical, chemical, and biological characteristics of all of the drug substances and pharmaceutical ingredients (excipients) to be used in fabricating the product. The drug and pharmaceutical materials utilized must be compatible and produce a drug product that is stable, efficacious, palatable, easy to administer, and well tolerated. Preformulation factors include physical properties such as particle size, crystalline structure, melting point, solubility, partition coefficient, dissolution, membrane permeability, dissociation constants, and drug stability. Successful development of a formulation includes multiple considerations involving the drug, excipients, compliance, storage, packaging, and stability, as well as patient considerations of taste, appearance, and palatability.

  13. Faith and Form on Screen

    Directory of Open Access Journals (Sweden)

    Henry Bacon

    2016-11-01

    Full Text Available To understand any aspect of being-in-the-world in general or cinematic experience in particular, both reductionist and holistic approaches are needed. Psychological accounts can give us only functional explanations of human behaviour or responses to signifying artifacts such as art. To understand the significance of these experiences the psychological must be complemented by a study on a level which may be termed spiritual. This line of thought is applied to analyses of Robert Bresson’s Pickpocket, starting from David Bordwell’s formalist and cognitive account of why many people experience this film as religious despite there being no explicit reference to religion. Paul Schrader’s analysis of the formal structure of this film in terms of his notion of transcendental style in film goes a step forward by explaining how the formal structure as he analyses it suggests a transcendental dimension which cannot be addressed directly. This approach connects in an illuminating way with Slavoj Žižek’s notions of the imaginary and the symbolic sphere. Bordwell’s approach, functioning on the psychological level, is basically reductionist, while Schrader’s, boosted with Žižek’s ideas as appropriated for the purposes of this article, is holistic and operative on the spiritual level. This two-tiered analysis reveals how cinematic form in Pickpocket serves as an indirect expression of faith.

  14. Filtrating forms of soil bacteria

    Science.gov (United States)

    Van'kova, A. A.; Ivanov, P. I.; Emtsev, V. T.

    2013-03-01

    Filtrating (ultramicroscopic) forms (FF) of bacteria were studied in a soddy-podzolic soil and the root zone of alfalfa plants as part of populations of the most widespread physiological groups of soil bacteria. FF were obtained by filtering soil solutions through membrane filters with a pore diameter of 0.22 μm. It was established that the greater part of the bacteria in the soil and in the root zone of the plants has an ultramicroscopic size: the average diameter of the cells is 0.3 μm, and their length is 0.6 μm, which is significantly less than the cell size of banal bacteria. The number of FF varies within a wide range depending on the physicochemical conditions of the habitat. The FF number's dynamics in the soil is of a seasonal nature; i.e., the number of bacteria found increases in the summer and fall and decreases in the winter-spring period. In the rhizosphere of the alfalfa, over the vegetation period, the number of FF and their fraction in the total mass of the bacteria increase. A reverse tendency is observed in the rhizoplane. The morphological particularities (identified by an electron microscopy) and the nature of the FF indicate their physiological activity.

  15. Miscellaneous Waste-Form FEPs

    Energy Technology Data Exchange (ETDEWEB)

    A. Schenker

    2000-12-08

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  16. 75 FR 51093 - Agency Information Collection Activities: Form I-864, Form I-864A, Form I-864EZ, and Form I-864W...

    Science.gov (United States)

    2010-08-18

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... of Homeland Security, U.S. Citizenship and Immigration Services (USCIS) will be submitting the...: Form I-864, Form I-864A, Form I-864EZ, and Form I-864W; U.S. Citizenship and Immigration Services...

  17. A Framework for Interactively Helpful Web Forms

    DEFF Research Database (Denmark)

    Bohøj, Morten; Bouvin, Niels Olof; Gammelmark, Henrik

    2012-01-01

    AdapForms is a framework for adaptive forms, consisting of a form definition language designating structure and constraints upon acceptable input, and a software architecture that continuously validates and adapts the form presented to the user. The validation is performed server-side, which...

  18. 29 CFR 1904.29 - Forms.

    Science.gov (United States)

    2010-07-01

    ...) Basic requirement. You must use OSHA 300, 300-A, and 301 forms, or equivalent forms, for recordable injuries and illnesses. The OSHA 300 form is called the Log of Work-Related Injuries and Illnesses, the 300-A is the Summary of Work-Related Injuries and Illnesses, and the OSHA 301 form is called the Injury...

  19. Extension of Chern-Simons forms

    Science.gov (United States)

    Konitopoulos, Spyros; Savvidy, George

    2014-06-01

    We investigate metric independent, gauge invariant, and closed forms in the generalized Yang-Mills (YM) theory. These forms are polynomial on the corresponding fields strength tensors - curvature forms and are analogous to the Pontryagin-Chern densities in the YM gauge theory. The corresponding secondary characteristic classes have been expressed in integral form in analogy with the Chern-Simons form. Because they are not unique, the secondary forms can be dramatically simplified by the addition of properly chosen differentials of one-step-lower-order forms. Their gauge variation can also be found yielding the potential anomalies in the gauge field theory.

  20. Electroweak form factors of the Skyrmion

    International Nuclear Information System (INIS)

    Braaten, E.; Sze-Man Tse; Willcox, C.

    1986-01-01

    The electroweak form factors of baryons are studied in the semiclassical approximation to the Skyrme model. General expressions for the form factors are given for arbitrary choices of the Skyrme-model Lagrangian. They are applied to the original two-parameter Skyrme model to compute the electric, magnetic, and axial-vector form factors of the nucleon and the electromagnetic nucleon-Δ transition form factors. The dependence of the form factors on the momentum transfer is compared with phenomenological dipole parametrizations

  1. Pre-form ceramic matrix composite cavity and method of forming and method of forming a ceramic matrix composite component

    Science.gov (United States)

    Monaghan, Philip Harold; Delvaux, John McConnell; Taxacher, Glenn Curtis

    2015-06-09

    A pre-form CMC cavity and method of forming pre-form CMC cavity for a ceramic matrix component includes providing a mandrel, applying a base ply to the mandrel, laying-up at least one CMC ply on the base ply, removing the mandrel, and densifying the base ply and the at least one CMC ply. The remaining densified base ply and at least one CMC ply form a ceramic matrix component having a desired geometry and a cavity formed therein. Also provided is a method of forming a CMC component.

  2. Trapping Dust to Form Planets

    Science.gov (United States)

    Kohler, Susanna

    2017-10-01

    Growing a planet from a dust grain is hard work! A new study explores how vortices in protoplanetary disks can assist this process.When Dust Growth FailsTop: ALMA image of the protoplanetary disk of V1247 Orionis, with different emission components labeled. Bottom: Synthetic image constructed from the best-fit model. [Kraus et al. 2017]Gradual accretion onto a seed particle seems like a reasonable way to grow a planet from a grain of dust; after all, planetary embryos orbit within dusty protoplanetary disks, which provides them with plenty of fuel to accrete so they can grow. Theres a challenge to this picture, though: the radial drift problem.The radial drift problem acknowledges that, as growing dust grains orbit within the disk, the drag force on them continues to grow as well. For large enough dust grains perhaps around 1 millimeter the drag force will cause the grains orbits to decay, and the particles drift into the star before they are able to grow into planetesimals and planets.A Close-Up Look with ALMASo how do we overcome the radial drift problem in order to form planets? A commonly proposed mechanism is dust trapping, in which long-lived vortices in the disk trap the dust particles, preventing them from falling inwards. This allows the particles to persist for millions of years long enough to grow beyond the radial drift barrier.Observationally, these dust-trapping vortices should have signatures: we would expect to see, at millimeter wavelengths, specific bright, asymmetric structures where the trapping occurs in protoplanetary disks. Such disk structures have been difficult to spot with past instrumentation, but the Atacama Large Millimeter/submillimeter Array (ALMA) has made some new observations of the disk V1247 Orionis that might be just what were looking for.Schematic of the authors model for the disk of V1247 Orionis. [Kraus et al. 2017]Trapped in a Vortex?ALMAs observations of V1247 Orionis are reported by a team of scientists led by Stefan

  3. New CERN Health Insurance Scheme (CHIS) forms

    CERN Multimedia

    HR Department

    2015-01-01

    New versions of the following forms for claims and requests to the CERN Health Insurance Scheme (CHIS) have been released:   form for claiming reimbursement of medical expenses,   form for requesting advance reimbursement, and   dental estimate form (for treatments foreseen to exceed 800 CHF).   The new forms are available in French and English. They can either be completed electronically before being printed and signed, or completed in paper form. New detailed instructions can be found at the back of the claim form; CHIS members are invited to read them carefully. The electronic versions (PDF) of all the forms are available on the CHIS website and on the UNIQA Member Portal. CHIS Members are requested to use these new forms forthwith and to discard any previous version. Questions regarding the above should be addressed directly to UNIQA (72730 or 022.718 63 00 or uniqa.assurances@cern.ch).

  4. A novel form of pectinesterase in tomato.

    Science.gov (United States)

    Warrilow, A G; Turner, R J; Jones, M G

    1994-03-01

    The pectinesterases in tomato pericarp were fractionated by cation exchange into four forms (A-D). Form A was the most abundant and C the second most abundant. Forms A-C were further purified by gel filtration, and antibodies were raised against A and C. Comparison of the different forms by dot blots and Western blots showed that although all three forms shared common immunological characteristics, there were also differences in their behaviour, indicative of structural differences. Form A had an N-terminal sequence identical to that published previously for the major pectinesterase in tomato fruit. In contrast, form C had a completely novel N-terminal sequence. Form A was absent from hypocotyls and roots. Forms B and C were present in comparable amounts in hypocotyls, while from C predominated in roots.

  5. Current assisted superplastic forming of titanium alloy

    Directory of Open Access Journals (Sweden)

    Wang Guofeng

    2015-01-01

    Full Text Available Current assisted superplastic forming combines electric heating technology and superplastic forming technology, and can overcome some shortcomings of traditional superplastic forming effectively, such as slow heating rate, large energy loss, low production efficiency, etc. Since formability of titanium alloy at room temperature is poor, current assisted superplastic forming is suitable for titanium alloy. This paper mainly introduces the application of current assisted superplastic forming in the field of titanium alloy, including forming technology of double-hemisphere structure and bellows.

  6. 76 FR 21946 - Proposed Collection; Comment Request for Form 990-BL; Schedule A (Form 990-BL), Form 6069

    Science.gov (United States)

    2011-04-19

    ... Initial Excise Tax Return for Black Lung Benefit Trusts and Certain Related Persons, and Form 6069, Return of Excise Tax on Excess Contributions to Black Lung Benefit Trust Under Section 4953 and Computation...: Form 990-BL, Schedule A (Form 990-BL), Information and Initial Excise Tax Return for Black Lung Benefit...

  7. FormCalc 9 and extensions

    International Nuclear Information System (INIS)

    Hahn, T.; Passehr, S.; Schappacher, C.

    2016-04-01

    We present Version 9 of the Feynman-diagram calculator FormCalc and a flexible new suite of shell scripts and Mathematica packages based on FormCalc, which can be adapted and used as a template for calculations.

  8. Strategic surfaces in sheet metal forming

    DEFF Research Database (Denmark)

    Olsson, David Dam; Andreasen, Jan Lasson; Bay, Niels

    Out-line: Introduction to tribology in sheet metal forming Developed strategic surfaces Tribological testing of strategic surfaces Conclusion......Out-line: Introduction to tribology in sheet metal forming Developed strategic surfaces Tribological testing of strategic surfaces Conclusion...

  9. Article and method of forming an article

    Science.gov (United States)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Dutta, Sandip; Schick, David Edward

    2017-12-26

    Provided are an article and a method of forming an article. The method includes providing a metallic powder, heating the metallic powder to a temperature sufficient to joint at least a portion of the metallic powder to form an initial layer, sequentially forming additional layers in a build direction by providing a distributed layer of the metallic powder over the initial layer and heating the distributed layer of the metallic powder, repeating the steps of sequentially forming the additional layers in the build direction to form a portion of the article having a hollow space formed in the build direction, and forming an overhang feature extending into the hollow space. The article includes an article formed by the method described herein.

  10. Green Supplier Network Manufacturer Commitment Form

    Science.gov (United States)

    Online form expressing interest in committing to be a Green Supplier; this form expresses your intent to participate in a confidential Green Suppliers Network assessment, implement recommended environmental improvements and complete a NIST MEP follow-up.

  11. Trajectories of Form in Modern Japanese Poetry

    OpenAIRE

    Beville, Ryan

    2015-01-01

    Form is central to poetry, if not all artistic endeavor. The Japanese literary tradition contains an array of poetic forms since its earliest extant texts, though some, like waka and kanshi, dominated poetic production for centuries. With Japan’s increased exposure to Western literary forms after the start of the Meiji era in 1868, the variety of new forms expanded rapidly. For many of Japan’s readers and poets, exposure to European and American literature was initially mediated by translatio...

  12. Analysis of forming limit in tube hydroforming

    International Nuclear Information System (INIS)

    Kim, Chan Il; Yang, Seung Hang; Kim, Young Suk

    2013-01-01

    The automotive industry has shown increasing interest in tube hydroforming. Despite many automobile structural parts being produced from cylindrical tubes, failures frequently occur during tube hydroforming under improper forming conditions. These problems include wrinkling, buckling, folding back, and bursting. We perform analytical studies to determine forming limits in tube hydroforming and demonstrate how these forming limits are influenced by the loading path. Theoretical results for the forming limits of wrinkling and bursting are compared with experimental results for an aluminum tube.

  13. Utilize Vacuum Forming to Make Interdisciplinary Connections

    Science.gov (United States)

    Love, Tyler S.; Valenza, Frank

    2011-01-01

    The concept of vacuum forming has been around since the 19th century, despite not being fully utilized in industry until the 1950s. In the past, industrial arts classes have used vacuum-forming projects to concentrate solely on the manufacturing process and the final product. However, vacuum forming is not just an old industrial arts activity; it…

  14. Focus on Form: A Critical Review

    Science.gov (United States)

    Ellis, Rod

    2016-01-01

    "Focus on form" (FonF) is a central construct in task-based language teaching. The term was first introduced by Michael Long to refer to an approach where learners' attention is attracted to linguistic forms as they engage in the performance of tasks. It contrasts with a structure-based approach--"focus on forms" (FonFs)--where…

  15. Stability of the spherical form of nuclei

    International Nuclear Information System (INIS)

    Sabry, A.A.

    1976-08-01

    An extension of the mass formula for a spherical nucleus in the drop model to include a largely deformed nucleus of different forms is investigated. It is found that although the spherical form is stable under small deformations from equilibrium, there exists for heavier nuclei another more favourable stable form, which can be approximated by two, or three touching prolate ellipsoids of revolution

  16. Matlab Code for Sorted Real Schur Forms

    NARCIS (Netherlands)

    Brandts, J.H.

    2001-01-01

    In Matlab, there exists a standard command to generate a real Schur form, and another command transforms a real Schur form into a complex one. In Golub and Van Loan (1996), a Matlab-like routine is sketched that sorts a complex Schur form: given a target value ? in the complex plane, the diagonal

  17. Two Forms of Philosophical Argument or Critique

    Science.gov (United States)

    Marshall, James D.

    2004-01-01

    In this paper the author looks at two forms of philosophical argument or critique. These are derived by himself from the work of the late Kantian scholar, Stephan Korner who, in his book "What is Philosophy?" (1969), draws a number of distinctions between different forms of "philosophical" argument or critique. The two forms of derived argument,…

  18. Electromagnetic N-N* transition form factors

    International Nuclear Information System (INIS)

    Devenish, R.C.E.; Eisenschitz, T.S.; Koerner, J.G.

    1975-11-01

    We define constraint-free electromagnetic N-N*(J) transition form factors for general abnormal and normal parity transitions and relate them to multipole and helicity transition form factors. Possible parametrizations of the constraint-free form factors are discussed, and various theoretically motivated simplifications are considered which are then compared to the available transition form factor data. If analysed in terms of the constraint-free form factors, a very simple picture is obtained for the three leading resonances P 33 , D 13 , and F 15 . (orig.) [de

  19. Variational principles for locally variational forms

    International Nuclear Information System (INIS)

    Brajercik, J.; Krupka, D.

    2005-01-01

    We present the theory of higher order local variational principles in fibered manifolds, in which the fundamental global concept is a locally variational dynamical form. Any two Lepage forms, defining a local variational principle for this form, differ on intersection of their domains, by a variationally trivial form. In this sense, but in a different geometric setting, the local variational principles satisfy analogous properties as the variational functionals of the Chern-Simons type. The resulting theory of extremals and symmetries extends the first order theories of the Lagrange-Souriau form, presented by Grigore and Popp, and closed equivalents of the first order Euler-Lagrange forms of Hakova and Krupkova. Conceptually, our approach differs from Prieto, who uses the Poincare-Cartan forms, which do not have higher order global analogues

  20. Solid form screening--a review.

    Science.gov (United States)

    Aaltonen, Jaakko; Allesø, Morten; Mirza, Sabiruddin; Koradia, Vishal; Gordon, Keith C; Rantanen, Jukka

    2009-01-01

    Solid form screening, the activity of generating and analysing different solid forms of an active pharmaceutical ingredient (API), has become an essential part of drug development. The multi-step screening process needs to be designed, performed and evaluated carefully, since the decisions made based on the screening may have consequences on the whole lifecycle of a pharmaceutical product. The selection of the form for development is made after solid form screening. The selection criteria include not only pharmaceutically relevant properties, such as therapeutic efficacy and processing characteristics, but also intellectual property (IP) issues. In this paper, basic principles of solid form screening are reviewed, including the methods used in experimental screening (generation, characterisation and analysis of solid forms, data mining tools, and high-throughput screening technologies) as well as basics of computational methods. Differences between solid form screening strategies of branded and generic pharmaceutical manufacturers are also discussed.

  1. The Causal Priority of Form in Aristotle

    Directory of Open Access Journals (Sweden)

    Kathrin Koslicki

    2014-12-01

    Full Text Available In various texts (e.g., Met. Z.17, Aristotle assigns priority to form, in its role as a principle and cause, over matter and the matter-form compound. Given the central role played by this claim in Aristotle's search for primary substance in the Metaphysics, it is important to understand what motivates him in locating the primary causal responsibility for a thing's being what it is with the form, rather than the matter. According to Met. Theta.8, actuality [energeia/entelecheia] in general is prior to potentiality [dunamis] in three ways, viz., in definition, time and substance. I propose an explicitly causal reading of this general priority claim, as it pertains to the matter-form relationship. The priority of form over matter in definition, time and substance, in my view, is best explained by appeal to the role of form as the formal, efficient and final cause of the matter-form compound, respectively, while the posteriority of matter to form according to all three notions of priority is most plausibly accounted for by the fact that the causal contribution of matter is limited to its role as material cause. When approached from this angle, the work of Met. Theta.8 can be seen to lend direct support to the more specific and explicitly causal priority claim we encounter in Met. Z.17, viz., that form is prior to matter in its role as the principle and primary cause of a matter-form compound's being what it is.

  2. A generalized definition for waste form durability

    International Nuclear Information System (INIS)

    Fanning, T. H.; Bauer, T. H.; Morris, E. E.; Wigeland, R. A.

    2002-01-01

    When evaluating waste form performance, the term ''durability'' often appears in casual discourse, but in the technical literature, the focus is often on waste form ''degradation'' in terms of mass lost per unit area per unit time. Waste form degradation plays a key role in developing models of the long-term performance in a repository environment, but other factors also influence waste form performance. These include waste form geometry; density, porosity, and cracking; the presence of cladding; in-package chemistry feedback; etc. The paper proposes a formal definition of waste form ''durability'' which accounts for these effects. Examples from simple systems as well as from complex models used in the Total System Performance Assessment of Yucca Mountain are provided. The application of ''durability'' in the selection of bounding models is also discussed

  3. Disjoint sum forms in reliability theory

    Directory of Open Access Journals (Sweden)

    B. Anrig

    2014-01-01

    Full Text Available The structure function f of a binary monotone system is assumed to be known and given in a disjunctive normal form, i.e. as the logical union of products of the indicator variables of the states of its subsystems. Based on this representation of f, an improved Abraham algorithm is proposed for generating the disjoint sum form of f. This form is the base for subsequent numerical reliability calculations. The approach is generalized to multivalued systems. Examples are discussed.

  4. Codimension two Kaehler submanifolds of space forms

    International Nuclear Information System (INIS)

    Ferreira, M.J.; Tribuzy, R.

    2001-03-01

    In this article we study isometric immersions from Kaehler manifolds whose (1,1) part of the second fundamental form is parallel, the ppmc isometric immersions. When the domain is a Riemann surface these immersions are precisely those with parallel mean curvature. P. J. Ryan has classified the Kaehler manifolds that admit isometric immersions, as real hypersurfaces, in space forms. We classify the codimension two ppmc isometric immersions into space forms. (author)

  5. Processes for production of alternative waste forms

    International Nuclear Information System (INIS)

    Ross, W.A.; Rusin, J.M.; McElroy, J.L.

    1979-01-01

    During the past 20 years, numerous waste forms and processes have been proposed for solidification of high-level radioactive wastes (HLW). The number has increased significantly during the past 3 to 4 years. At least five factors must be considered in selecting the waste form and process method: 1) processing flexibility, 2) waste loading, 3) canister size and stability, 4) waste form inertness and stability, and 5) processing complexity. This paper describes various waste form processes and operations, and a simple system is proposed for making comparisons. This system suggests that one goal for processes would be to reduce the number of process steps, thereby providing less complex processing systems

  6. Summary and evaluation of nuclear waste forms

    International Nuclear Information System (INIS)

    Lutze, W.; Ewing, R.C.

    1988-01-01

    Typically, the final comparison of waste forms (e.g., Hench et al. 1984) rested on the predicted risk to man, often calculated as a dose-to-man over long periods of time (Cheung et al. 1982). The codes (e.g., MISER) used in these predictions calculated the transport behavior of radionuclides from the repository and, not surprisingly, found that the differences in the performance between waste forms (e.g., glass versus ceramic) did not result in significant differences in the final ''dose-to-man''. Such conclusions formed the basis for the discontinuation of research programs on alternative or second generation waste forms. This was most unfortunate, because despite the seemingly quantitative results of such calculations, the codes did not take advantage of a detailed knowledge of the various process by which waste form might degrade (e.g., fracture, corrosion or radiation effects). Thus, the conclusion that the calculated ''dose-to-man'' was not sensitive to the orders of magnitude variation in the release of radionuclides from different types of waste forms was not based on any scientific understanding of waste form degradation processes. Significantly, such calculations obscured important differences in the materials properties among waste forms and the different ways in which waste forms interact with various geologic environments. In this chapter, the authors have tried to avoid an approach of this type and have instead compiled data from the contributed chapters into tables

  7. π-meson elastic form factor

    International Nuclear Information System (INIS)

    Gajewski, W.; Swiecki, M.

    1975-01-01

    This paper is devoted to the description of the present status of our knowledge about π meson elastic form factor. In the first section there is given a definition of the form factor on the basis of electromagnetic interactions, and its extension to weak and strong interactions. Next, there are reviewed theoretical models, which on the assumption of analyticity predict features of π meson form factor. In the last sections the results of experimental investigaton of π meson form factor are described with the stress on the results of the recent experiment made on Serpukhov accelerator in order to measure the π meson electromagnetic radius. (author)

  8. Theory of Single Point Incremental Forming

    DEFF Research Database (Denmark)

    Martins, P.A.F.; Bay, Niels; Skjødt, Martin

    2008-01-01

    This paper presents a closed-form theoretical analysis modelling the fundamentals of single point incremental forming and explaining the experimental and numerical results available in the literature for the past couple of years. The model is based on membrane analysis with bi-directional in-plan...

  9. Superplastic forming simulation of RF detector foils

    NARCIS (Netherlands)

    Snippe, Q.H.C.; Meinders, V.T.

    2009-01-01

    Complex-shaped sheet products, such as R(adio) F(requency) shieldings sheets, used in a subatomic particle detector, can be manufactured by superplastic forming. To predict whether a formed sheet is resistant against gas leakage, FE simulations are used, involving a user-defined material model. This

  10. Mathematical ratio in defining arch form

    Directory of Open Access Journals (Sweden)

    Johan A Budiman

    2017-01-01

    Full Text Available Introduction: The treatment of Class I malocclusion aims to arrange teeth position in a good arch form. The arch form consists of tooth size and arch dimension (intercanine width, canine depth, intermolar width, molar depth. Numerous methods have been used to describe the arch form quantitatively. The aim of this study was to develop a mathematical ratio for identifying arch form (square, oval, tapered using arch dimension variables (intercanine width, canine depth, intermolar width, molar depth. Materials and Methods: Dental cast pre and post-orthodontic treatments from 190 Indonesian patients were scanned to obtain digital data. All data were measured using “Image Tool.” The measured data (tooth size, intercanine width, intercanine depth, intermolar width, intermolar depth, and arch perimeter were analyzed statistically using ordered logistic to find out determining variables to the arch form. Results: The validity, reliability, and normality of all the data were analyzed using Stata. From analyzing the data using ordered logistic, intercanine width and intermolar depth showed a reverse relation to the arch form. The shape of the arch form (square, oval, and tapered can be described quantitatively by using ratio (CD/CW/(MD/MW; a ratio less than 45.30% indicates square, 45.30–53.37% indicates oval, and more than 53.37% indicates tapered. Conclusions: (CD/CW/(MD/MW ratio can be used to describe arch form quantitatively.

  11. Formulas in Physics Have a "Standard" Form

    Science.gov (United States)

    Moelter, Matthew J.; Jackson, Martin

    2012-01-01

    We discuss the importance of the ordering of symbols in physics formulas and identify implicit conventions that govern the "standard" form for how formulas are written and interpreted. An important part of writing and reading this form is understanding distinctions among constants, parameters, and variables. We delineate these conventions and…

  12. [Pharmaceutical advice concerning different pharmaceutical dosage forms].

    Science.gov (United States)

    Szakonyi, Gergely; Zelkó, Romána

    2010-01-01

    The present paper summarizes the commonly applied types of drug uptake and the pharmacists' advice concerning a certain dosage form. The manuscript also deals with the modified release dosage forms and their abbreviations in the name of the marketing authorized products.

  13. Associations between urban form and cycling

    DEFF Research Database (Denmark)

    Nielsen, Thomas Alexander Sick; Olafsson, Anton Stahl; Carstensen, Trine Agervig

    The bikeability project has analysed the environmental correlates of cycling based on Danish National Transportation Survey data transportation and urban form micro-data; and based on a smaller sample of primary data which included housing preferences, policy and attitude variables. Analysis of N...... – but does not rule out the importance of urban form....

  14. Major and minor form of hereditary hyperekplexia

    NARCIS (Netherlands)

    Tijssen, MAJ; Vergouwe, MN; van Dijk, JG; Rees, M; Frants, RR; Brown, P

    Hyperekplexia is a hereditary neurological disorder characterized by excessive startle responses. Within the disorder two clinical forms can be distinguished. The major form is characterized by continuous generalized stiffness in the first year of life and an exaggerated startle reflex, accompanied

  15. Lubricant failure in sheet metal forming processes

    NARCIS (Netherlands)

    van der Heide, Emile

    2002-01-01

    The application of tribology to sheet metal forming processes (SMF) contributes to a general industrial aim i.e., to make products of high quality at an increasingly competitive way, by enhancing the tool life and maintaining a constant level of friction during forming. Both aspects are served by

  16. Ceramic and glass radioactive waste forms

    Energy Technology Data Exchange (ETDEWEB)

    Readey, D.W.; Cooley, C.R. (comps.)

    1977-01-01

    This report contains 14 individual presentations and 6 group reports on the subject of glass and polycrystalline ceramic radioactive waste forms. It was the general consensus that the information available on glass as a waste form provided a good basis for planning on the use of glass as an initial waste form, that crystalline ceramic forms could also be good waste forms if much more development work were completed, and that prediction of the chemical and physical stability of the waste form far into the future would be much improved if the basic synergistic effects of low temperature, radiation and long times were better understood. Continuing development of the polycrystalline ceramic forms was recommended. It was concluded that the leach rate of radioactive species from the waste form is an important criterion for evaluating its suitability, particularly for the time period before solidified waste is permanently placed in the geologic isolation of a Federal repository. Separate abstracts were prepared for 12 of the individual papers; the remaining two were previously abstracted.

  17. 8 CFR 265.1 - Forms.

    Science.gov (United States)

    2010-01-01

    ... for those exempted by section 263(b) of the Act, all aliens in the United States required to register under section 262 of the Act shall report each change of address and new address within 10 days on Form... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Forms. 265.1 Section 265.1 Aliens and...

  18. Closed forms and multi-moment maps

    DEFF Research Database (Denmark)

    Madsen, Thomas Bruun; Swann, Andrew Francis

    We extend the notion of multi-moment map to geometries defined by closed forms of arbitrary degree. We give fundamental existence and uniqueness results and discuss a number of essential examples, including geometries related to special holonomy. For forms of degree four, multi-moment maps...

  19. New organizational forms, controls, and institutions

    NARCIS (Netherlands)

    Annosi, Maria Carmela; Brunetta, Federica

    2017-01-01

    This book highlights the growing number of 'post-bureaucratic' firms that are abandoning hierarchical organizational forms in favor of self-managing teams. Addressing the need to outperform, these new organization types foresee the benefits of an organic structure with new and more indirect forms of

  20. Information Technology and New Forms of Organisations.

    Science.gov (United States)

    Ghasemiyeh, Rahim; Li, Feng

    This paper evaluates the impacts of the Internet on organizational structures and identifies new forms of organizations in light of information technology (IT) advances. Four traditional forms of organizations are summarized, i.e., the bureaucratic hierarchy, the entrepreneurial organization, the matrix organization, and the adhocacy. The…

  1. formes histologiques particulieres du cancer du nasopharynx

    African Journals Online (AJOL)

    19 déc. 2007 ... tique. Nous avons étudié le profil thérapeutique et évolutif de ces formes rares. J. TUN ORL - N° 19 DÉCEMBRE 2007. 47. FORMES HISTOLOGIQUES PARTICULIERES. DU CANCER DU NASOPHARYNX. H. DHOUIB, M. MNEJJA, W. BOUAYED, A.CHAKROUN, T. BOUDAWARA*,. I. CHARFEDDINE, M.

  2. Closed forms and multi-moment maps

    DEFF Research Database (Denmark)

    Madsen, T. B.; Swann, A.

    2013-01-01

    We extend the notion of multi-moment map to geometries defined by closed forms of arbitrary degree. We give fundamental existence and uniqueness results and discuss a number of essential examples, including geometries related to special holonomy. For forms of degree four, multi-moment maps are gu...

  3. 7 CFR 58.729 - Forming containers.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Forming containers. 58.729 Section 58.729 Agriculture... Procedures § 58.729 Forming containers. Containers either lined or unlined shall be assembled and stored in a sanitary manner to prevent contamination. The handling of containers by filler crews should be done with...

  4. Form Filling with Self-Compacting Concrete

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm

    2002-01-01

    This paper describes a newly started Ph.D. project with the aim of simulating the form filling ability of Self-Compacting Concrete (SCC) taking into account the form geometry, reinforcement configuration, casting technique, and the rheological properties of the concrete. Comparative studies...

  5. Advanced verb form production in story retelling.

    Science.gov (United States)

    Sutter, J C; Johnson, C J

    1995-10-01

    This study investigated the rate at which 60 elementary school children produced three advanced verb forms--past progressive, past perfect progressive, and past perfect--when asked to retell literate narratives, a discourse genre that originates from written prose and frequently contains these advanced verb forms. The three verb forms were embedded in nine story episodes and told to the children. The children were then asked to retell the stories. Verb form production by the children was scored as either "borrowed" or substituted spontaneous production. During their story-retelling episodes, the 6-, 7-, and 8-year-old children borrowed all verb forms under investigation from the stimuli stories. They significantly preferred to borrow the past progressive over the past perfect progressive and past perfect forms. Rate of verb form production by 8-year-old children was significantly higher than for the younger age groups. These data suggest that advanced verb form production is influenced by the children's sensitivity to the type of narrative register (i.e., 1st or 3rd person perspective), the propositional ability associated with narrative development, and the progressive meaning of the -ing suffix.

  6. Child Prodigies: A Distinctive Form of Giftedness.

    Science.gov (United States)

    Feldman, David Henry

    1993-01-01

    This discussion sees child prodigy as a distinct form of giftedness characterized by a more focused, specialized, and domain-specific form of giftedness than seen in other gifted children. The child prodigy phenomenon demonstrates the complex relationships between psychometric intelligence in the traditional sense and expression of talent within…

  7. 7 CFR 29.6016 - Form.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Form. 29.6016 Section 29.6016 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Standards Definitions § 29.6016 Form. The stage of preparation of tobacco such as stemmed or...

  8. Siegel Modular Forms and Black Hole Entropy

    NARCIS (Netherlands)

    Belin, Alexandre; Castro, Alejandra; Vieira Gomes, Joao; Keller, Christoph A.

    2017-01-01

    We discuss the application of Siegel Modular Forms to Black Hole entropy counting. The role of the Igusa cusp form $\\chi_{10}$ in the D1D5P system is well-known, and its transformation properties are what allows precision microstate counting in this case. We apply a similar method to extract the

  9. Alternate Family Forms and Catholic Attitudes

    Science.gov (United States)

    Schulte, James H.

    1978-01-01

    The purpose of this study was to examine current Catholic attitudes toward marriage and various marriage forms and to consider the influence of degree of religiosity. Questionnaires were distributed at four programs of the Catholic Family Life Program in a midwestern metropolitan area. Nontraditional marriage forms have a growing potential. (JEL)

  10. Re-discovering an Organizational Form

    DEFF Research Database (Denmark)

    Leixnering, Stephan; Meyer, Renate

    The corporation is the iconic emblem of modern capitalism. While the corporate form is today widely perceived as an instrument to maximize shareholder value, its institutionalization as an organizational form heavily built on the orientation towards public interests as a constitutive element...

  11. 13 CFR 108.100 - Business form.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Business form. 108.100 Section 108.100 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Qualifications for the NMVC Program Organizing A Nmvc Company § 108.100 Business form. A NMVC...

  12. Electrically assisted forming modeling and control

    CERN Document Server

    Salandro, Wesley A; Bunget, Cristina; Mears, Laine; Roth, John T

    2015-01-01

    Maximizing reader insights into the latest research findings and applications of Electrically-Assisted Forming (EAF) – whereby metals are formed under an electric current field – this book explains how such a process produces immediate improved formability of metals beyond the extent of thermal softening, and allows metals to be formed to greater elongation with lower mechanical energy as well as allowing for lightweight brittle metals such as magnesium and titanium to be formed without external heating or annealing, enabling the more effective use of these lightweight metals in design. Including case studies that illustrate and support the theoretical content and real-world applications of the techniques discussed, this book also serves to enrich readers understanding of the underlying theories that influence electro-plastic behaviour. The authors have extensive experience in studying Electrically-Assisted Forming and have written extensively on the topic with publications including experimental works, t...

  13. Disability and Bureaucratic Forms of Life

    Directory of Open Access Journals (Sweden)

    Thomas Abrams

    2015-06-01

    Full Text Available This paper employs a hybrid actor-network theory/phenomenological approach to a frequent bother in the lives of disabled persons: bureaucratic forms. I argue that these forms are key sites where disabled personhood emerges, something I examine through the lens of what philosopher Annemarie Mol calls ‘ontological politics’. To be disabled is to be entered into the bureaucratic form of life. These forms translate human existence into a categorize-able, transportable and combinable object, to be administered through ‘centers of calculation’. Combining Heidegger’s fundamental ontology with Latour’s theory of paperwork, I suggest that these forms represent disability in terms of ‘objective presence’, as a mere pre-existing thing, rather than a human way of being. I conclude with suggestions for further phenomenological research that takes embodied difference as its point of departure.

  14. IMO Fireball report form: results and prospects

    Science.gov (United States)

    Hankey, M.; Perlerin, V.

    2015-01-01

    At the 2014 IMC, we presented the new IMO (International Meteor Organization) online, Fireball report (available at fireballs.imo.net). This fireball report form was specifically designed for use by people with no astronomy experience who witnessed a fireball, a bolide or a suspected similar phenomenon. The IMO version of the form has been officially launched in February 2015. Since then, the form has been translated in different languages and customized for organizations around the world. In this paper, we will present preliminary results of the form and provide tips to improve the online presence of local organizations, in order to promote usage. We will also highlight procedures to be followed by local organizations to get a custom version of the form.

  15. Advanced waste forms from spent nuclear fuel

    International Nuclear Information System (INIS)

    Ackerman, J.P.; McPheeters, C.C.

    1995-01-01

    More than one hundred spent nuclear fuel types, having an aggregate mass of more than 5000 metric tons (2700 metric tons of heavy metal), are stored by the United States Department of Energy. This paper proposes a method for converting this wide variety of fuel types into two waste forms for geologic disposal. The method is based on a molten salt electrorefining technique that was developed for conditioning the sodium-bonded, metallic fuel from the Experimental Breeder Reactor-II (EBR-II) for geologic disposal. The electrorefining method produces two stable, optionally actinide-free, high-level waste forms: an alloy formed from stainless steel, zirconium, and noble metal fission products, and a ceramic waste form containing the reactive metal fission products. Electrorefining and its accompanying head-end process are briefly described, and methods for isolating fission products and fabricating waste forms are discussed

  16. Urban form, health, and the law's limits.

    Science.gov (United States)

    Buzbee, William W

    2003-09-01

    Urban form, the law, and health are undoubtedly linked. However, nonlegal factors such as 20th-century reliance on the automobile as well as associated governmental actions and private investment choices have greatly influenced urban form, especially urban sprawl. The American system of federalism, with its traditional allocation of land-use legal authority to local governments, and resulting fragmented legal authority over causes and effects of urban sprawl, renders difficult legal efforts to reshape urban form. Legal frameworks and the dynamics and effects of urban sprawl are largely mismatched. Still, existing legal frameworks and modest legal reforms provide means to encourage or at least allow urban forms that are more conducive to health. However, the law will not easily transform urban form and deter urban sprawl.

  17. Usability of Public Administration Electronic Forms

    Directory of Open Access Journals (Sweden)

    Miloslav Hub

    2015-06-01

    Full Text Available This paper is focused on the testing and evaluating of public administration electronic forms from the usability point of view. Its objective is to design a suitable methodology for usability testing of electronic forms and their description and distribution to public administration information systems professionals. Firstly, methods of usability engineering are summarized and a suitable method for usability testing and evaluation of electronic forms is selected. Farther, the methodology of electronic forms usability testing that uses the selected method is suggested. In the last part of the paper the case study that uses the proposed methodology is suggested and performed. The main benefit of the work is the design of testing methodology and proposition of the set of recommendations for new public administration electronic forms design.

  18. Composite materials formed with anchored nanostructures

    Science.gov (United States)

    Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

    2015-03-10

    A method of forming nano-structure composite materials that have a binder material and a nanostructure fiber material is described. A precursor material may be formed using a mixture of at least one metal powder and anchored nanostructure materials. The metal powder mixture may be (a) Ni powder and (b) NiAl powder. The anchored nanostructure materials may comprise (i) NiAl powder as a support material and (ii) carbon nanotubes attached to nanoparticles adjacent to a surface of the support material. The process of forming nano-structure composite materials typically involves sintering the mixture under vacuum in a die. When Ni and NiAl are used in the metal powder mixture Ni.sub.3Al may form as the binder material after sintering. The mixture is sintered until it consolidates to form the nano-structure composite material.

  19. Exotic Forms of Silicon for Energy Applications

    Science.gov (United States)

    Taylor, P. Craig

    2015-03-01

    Over the last few decades many exotic forms of carbon, such as carbon-60, carbon nanotubes, and graphene, have generated novel scientific discoveries and revolutionized many important applications. Similar potentially transformative breakthroughs may be expected with exotic forms of silicon. Such structures include, but are not necessarily limited to, (1) those formed under high pressure that are metastable at ambient pressure, (2) single layers of Si (silicene), (2) clathrate Si, which has been studied for superconducting and thermoelectric properties but not in any detail for semiconductor applications, (3) nanostructured forms of Si (nanodots and nanowires), including those composed of diamond Si, (4) porous Si, and (5) any other structures that differ in their structural, optical or electronic properties from bulk diamond Si. Silicon is an abundant, non-toxic element around which an advanced technology exists for semiconducting devices based on diamond Si. One of these exotic forms of Si could form the basis for the next revolution in electronics or even opto-electronics, since some forms exhibit direct, or nearly direct, band gaps. Recent results toward producing pure and dopable semiconductors out of Si nanodots imbedded in amorphous matrices and in clathrate Si and clathrate Si-Ge alloys will be discussed. The author acknowledges important collaborations with R. T. Collins, C. A. Koh, L. Krishna, M. Lusk, and P. Stradins. DOE SUNSHOT program, under Contract DE-EE0005326 and by the NSF MRSEC program under Grant DMR-0820518.

  20. Slab edge insulating form system and methods

    Science.gov (United States)

    Lee, Brain E [Corral de Tierra, CA; Barsun, Stephan K [Davis, CA; Bourne, Richard C [Davis, CA; Hoeschele, Marc A [Davis, CA; Springer, David A [Winters, CA

    2009-10-06

    A method of forming an insulated concrete foundation is provided comprising constructing a foundation frame, the frame comprising an insulating form having an opening, inserting a pocket former into the opening; placing concrete inside the foundation frame; and removing the pocket former after the placed concrete has set, wherein the concrete forms a pocket in the placed concrete that is accessible through the opening. The method may further comprise sealing the opening by placing a sealing plug or sealing material in the opening. A system for forming an insulated concrete foundation is provided comprising a plurality of interconnected insulating forms, the insulating forms having a rigid outer member protecting and encasing an insulating material, and at least one gripping lip extending outwardly from the outer member to provide a pest barrier. At least one insulating form has an opening into which a removable pocket former is inserted. The system may also provide a tension anchor positioned in the pocket former and a tendon connected to the tension anchor.

  1. Summary: special waste form lysimeters - arid program

    International Nuclear Information System (INIS)

    Skaggs, R.L.; Walter, M.B.

    1987-01-01

    The purpose of the Special Waste Form Lysimeters - Arid Program is to determine the performance of solidified commercial low-level waste forms using a field-scale lysimeter facility constructed for measuring the release and migration of radionuclides from the waste forms. The performance of these waste forms, as measured by radionuclide concentrations in lysimeter effluent, will be compared to that predicted by laboratory characterization of the waste forms. Waste forms being tested include nuclear power reactor waste streams that have been solidified in cement, Dow polymer, and bitumen. To conduct the field leaching experiments a lysimeter facility was built to measure leachate under actual environmental conditions. Field-scale samples of waste were buried in lysimeters equipped to measure water balance components, effluent radionuclide concentrations, and to a limited extent, radionuclide concentrations in lysimeter soil samples. The waste forms are being characterized by standard laboratory leach tests to obtain estimates of radionuclide release. These estimates will be compared to leach rates observed in the field. Adsorption studies are being conducted to determine the amount of contaminant available for transport after the release. Theoretical solubility calculations will also be performed to investigate whether common solid phases could be controlling radionuclide release. 4 references, 8 figures, 1 table

  2. On local invariants of singular symplectic forms

    Science.gov (United States)

    Domitrz, Wojciech

    2017-04-01

    We find a complete set of local invariants of singular symplectic forms with the structurally stable Martinet hypersurface on a 2 n-dimensional manifold. In the C-analytic category this set consists of the Martinet hypersurface Σ2, the restriction of the singular symplectic form ω to TΣ2 and the kernel of ω n - 1 at the point p ∈Σ2. In the R-analytic and smooth categories this set contains one more invariant: the canonical orientation of Σ2. We find the conditions to determine the kernel of ω n - 1 at p by the other invariants. In dimension 4 we find sufficient conditions to determine the equivalence class of a singular symplectic form-germ with the structurally smooth Martinet hypersurface by the Martinet hypersurface and the restriction of the singular symplectic form to it. We also study the singular symplectic forms with singular Martinet hypersurfaces. We prove that the equivalence class of such singular symplectic form-germ is determined by the Martinet hypersurface, the canonical orientation of its regular part and the restriction of the singular symplectic form to its regular part if the Martinet hypersurface is a quasi-homogeneous hypersurface with an isolated singularity.

  3. Designing usable web forms- Empirical evaluation of web form improvement guidelines

    DEFF Research Database (Denmark)

    Seckler, Mirjam; Heinz, Silvia; Bargas-Avila, Javier A.

    2014-01-01

    This study reports a controlled eye tracking experiment (N = 65) that shows the combined effectiveness of 20 guidelines to improve interactive online forms when applied to forms found on real company websites. Results indicate that improved web forms lead to faster completion times, fewer form su...... submission trials, and fewer eye movements. Data from subjective questionnaires and interviews further show increased user satisfaction. Overall, our findings highlight the importance for web designers to improve their web forms using UX guidelines.......This study reports a controlled eye tracking experiment (N = 65) that shows the combined effectiveness of 20 guidelines to improve interactive online forms when applied to forms found on real company websites. Results indicate that improved web forms lead to faster completion times, fewer form...

  4. L-Functions and Automorphic Forms

    CERN Document Server

    Kohnen, Winfried

    2017-01-01

    This book presents a collection of carefully refereed research articles and lecture notes stemming from the Conference "Automorphic Forms and L-Functions", held at the University of Heidelberg in 2016.  The theory of automorphic forms and their associated L-functions is one of the central research areas in modern number theory, linking number theory, arithmetic geometry, representation theory, and complex analysis in many profound ways.  The 19 papers cover a wide range of topics within the scope of the conference, including automorphic L-functions and their special values, p-adic modular forms, Eisenstein series, Borcherds products, automorphic periods, and many more.

  5. Phenomenology of the deuteron electromagnetic form factors

    International Nuclear Information System (INIS)

    David Abbott; Abdellah Ahmidouch; H. Anklin; J. Arvieux; James P. Ball; Shelton Beedoe; Elizabeth Beise; Louis Bimbot; Werner Boeglin; Herbert Breuer; Roger Carlini; Nicholas Chant; Samuel Danagoulian; K. Dow; Jean-Eric Ducret; Jim Dunne; Lars Ewell; L. Eyraud; C. Furget; Michel Garcon; Ron Gilman; Charles Glashausser; Paul Gueye; Kenneth Gustafsson; Kawtar Hafidi; A. Honegger; J. Jourdan; Serge Kox; Gerfried Kumbartzki; L. Lu; Allison Lung; Pete Markowitz; Justin McIntyre; David Meekins; F. Merchez; Joseph Mitchell; R. Mohring; S. Mtingwa; H. Mrktchyan; D. Pitz; Liming Qin; Ronald Ransome; J.-S. R'eal; Philip Roos; Paul Rutt; Reyad Sawafta; Stepan Stepanyan; Raphael Tieulent; E. Tomasi-Gustafsson; William Turchinetz; K. Vansyoc; J. Volmer; E. Voutier; Claude Williamson; Stephen Wood; Chen Yan; Jianguo Zhao; W. Zhao

    2000-01-01

    A rigorous extraction of the deuteron charge form factors from tensor polarization data in elastic electron-deuteron scattering, at given values of the 4-momentum transfer, is presented. Then the world data for elastic electron-deuteron scattering is used to parameterize, in three different ways, the three electromagnetic form factors of the deuteron in the 4-momentum transfer range 0-7 fm. This procedure is made possible with the advent of recent polarization measurements. The parameterizations allow a phenomenological characterization of the deuteron electromagnetic structure. They can be used to remove ambiguities in the form factors extraction from future polarization data

  6. Estimation of uranium forms in oceanic water

    International Nuclear Information System (INIS)

    Krylov, O.T.; Novikov, P.D.; Nesterova, M.P.

    1985-01-01

    A critical consideration is given to the notions about uranium forms in ocean water. To estimate uranium forms a model is suggested which takes into account possjble formation of complexes of uranyl ions and ocean water anions Cl - , SO 4 2- , CO 3 2- , HCO 3 - , OH - , F - . The available published data are used to estimate necessary thermodynamic stability constants of the complexes, activity coefficients and concentration of componenets. The thermodynamic calculation shows that uranium hydroxocomplex compounds UO 2 (OH) 4 2- (99.17%) and UO 2 (OH) 3 - (083%) are the most probable uranium forms in ocear water of 34.3% salinity at 25 deg C and 1 atm pressure

  7. Photovoltaic cell module and method of forming

    Science.gov (United States)

    Howell, Malinda; Juen, Donnie; Ketola, Barry; Tomalia, Mary Kay

    2017-12-12

    A photovoltaic cell module, a photovoltaic array including at least two modules, and a method of forming the module are provided. The module includes a first outermost layer and a photovoltaic cell disposed on the first outermost layer. The module also includes a second outermost layer disposed on the photovoltaic cell and sandwiching the photovoltaic cell between the second outermost layer and the first outermost layer. The method of forming the module includes the steps of disposing the photovoltaic cell on the first outermost layer, disposing a silicone composition on the photovoltaic cell, and compressing the first outermost layer, the photovoltaic cell, and the second layer to form the photovoltaic cell module.

  8. Low temperature waste form process intensification

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Cozzi, A. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hansen, E. K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hill, K. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-09-30

    This study successfully demonstrated process intensification of low temperature waste form production. Modifications were made to the dry blend composition to enable a 50% increase in waste concentration, thus allowing for a significant reduction in disposal volume and associated costs. Properties measurements showed that the advanced waste form can be produced using existing equipment and processes. Performance of the waste form was equivalent or better than the current baseline, with approximately double the amount of waste incorporation. The results demonstrate the feasibility of significantly accelerating low level waste immobilization missions across the DOE complex and at environmental remediation sites worldwide.

  9. Conference L-Functions and Automorphic Forms

    CERN Document Server

    Kohnen, Winfried; LAF

    2017-01-01

    This book presents a collection of carefully refereed research articles and lecture notes stemming from the Conference "Automorphic Forms and L-Functions", held at the University of Heidelberg in 2016.  The theory of automorphic forms and their associated L-functions is one of the central research areas in modern number theory, linking number theory, arithmetic geometry, representation theory, and complex analysis in many profound ways.  The 19 papers cover a wide range of topics within the scope of the conference, including automorphic L-functions and their special values, p-adic modular forms, Eisenstein series, Borcherds products, automorphic periods, and many more.

  10. Problems in the theory of modular forms

    CERN Document Server

    Murty, M Ram; Graves, Hester

    2016-01-01

    This book introduces the reader to the fascinating world of modular forms through a problem-solving approach. As such, besides researchers, the book can be used by the undergraduate and graduate students for self-instruction. The topics covered include q-series, the modular group, the upper half-plane, modular forms of level one and higher level, the Ramanujan τ-function, the Petersson inner product, Hecke operators, Dirichlet series attached to modular forms and further special topics. It can be viewed as a gentle introduction for a deeper study of the subject. Thus, it is ideal for non-experts seeking an entry into the field. .

  11. Nonlinear dynamics exploration through normal forms

    CERN Document Server

    Kahn, Peter B

    2014-01-01

    Geared toward advanced undergraduates and graduate students, this exposition covers the method of normal forms and its application to ordinary differential equations through perturbation analysis. In addition to its emphasis on the freedom inherent in the normal form expansion, the text features numerous examples of equations, the kind of which are encountered in many areas of science and engineering. The treatment begins with an introduction to the basic concepts underlying the normal forms. Coverage then shifts to an investigation of systems with one degree of freedom that model oscillations

  12. EPCRA Trade Secret Forms and Instructions

    Science.gov (United States)

    This form is required in order to substantiate claims of trade secrecy. You must be able to describe safeguarding measures and disclosure history for the specific chemical identity, and identify harm to your competitive position.

  13. EPCRA Trade Secret Form Instructions (PDF)

    Science.gov (United States)

    Detail on what information is required for each section of the form. Only the specific chemical identity required to be disclosed in EPCRA sections 303, 311,312, and 313 submissions may be claimed trade secret on the EPCRA report.

  14. Teaching With Documents: Chinese Exclusion Forms.

    Science.gov (United States)

    Simmons, Linda, Ed.

    1986-01-01

    Reviews the history of Chinese immigration to the United States and provides a facsimilie of a form used to document immigrants under the Chinese Exclusion Act. Teaching suggestions are included. (JDH)

  15. Hybrids and glueballs: new forms of matter

    International Nuclear Information System (INIS)

    Close, F.

    1983-01-01

    Theories of the forces that bind together the atomic nucleus predict the existence of exotic forms of matter, dubbed ''glueballs'' and ''hybrids''. The underlying story illustrates progress in science through the agencies of analogy and paradox. (author)

  16. Detection of Life Forms, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Gaia Genomics proposes to develop an instrument for the detection of earthborn and/or planetary life forms that are based on a nucleic acid paradigm. Highly...

  17. Ozone-forming potential of reformulated gasoline

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Geosciences, Environment and Resources; Division on Earth and Life Studies; National Research Council; National Academy of Sciences

    ... and comparison of the emissions from motor vehicles using different reformulated gasolines based on their ozone-forming potentials and to assess the concomitant impact of that approach on air-quality benefits...

  18. Observer Manual and Current Data Collection Forms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Observer Program web page that lists the observer field manual and all current data collection forms that observers are required to take out to sea.

  19. VIERS Electronic Form Submission Service (EFSS)

    Data.gov (United States)

    Department of Veterans Affairs — The D2D EFSS (Inc 1 and 2) provides a common access point to standardize, centralize, and integrate the universal collection of Benefit Claim Forms and supporting...

  20. Small Form Factor RFID Applicator, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed development of a small form factor Astrobee dedicated RFID label applicator will allow current and future free flying vehicles to place RFID labels...

  1. Elevated temperature forming method and preheater apparatus

    Science.gov (United States)

    Krajewski, Paul E; Hammar, Richard Harry; Singh, Jugraj; Cedar, Dennis; Friedman, Peter A; Luo, Yingbing

    2013-06-11

    An elevated temperature forming system in which a sheet metal workpiece is provided in a first stage position of a multi-stage pre-heater, is heated to a first stage temperature lower than a desired pre-heat temperature, is moved to a final stage position where it is heated to a desired final stage temperature, is transferred to a forming press, and is formed by the forming press. The preheater includes upper and lower platens that transfer heat into workpieces disposed between the platens. A shim spaces the upper platen from the lower platen by a distance greater than a thickness of the workpieces to be heated by the platens and less than a distance at which the upper platen would require an undesirably high input of energy to effectively heat the workpiece without being pressed into contact with the workpiece.

  2. Lubricant Test Methods for Sheet Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

    2008-01-01

    Sheet metal forming of tribologically difficult materials such as stainless steel, Al-alloys and Ti-alloys or forming in tribologically difficult operations like ironing, punching or deep drawing of thick plate requires often use of environmentally hazardous lubricants such as chlorinated paraffin...... oils in order to avoid galling. The present paper describes a systematic research in the development of new, environmentally harmless lubricants focusing on the lubricant testing aspects. A system of laboratory tests has been developed to study the lubricant performance under the very varied conditions...... appearing in different sheet forming operations such as stretch forming, deep drawing, ironing and punching. The laboratory tests have been especially designed to model the conditions in industrial production. Application of the tests for evaluating new lubricants before introducing them in production has...

  3. Dry lubricant films for aluminum forming.

    Energy Technology Data Exchange (ETDEWEB)

    Wei, J.; Erdemir, A.; Fenske, G. R.

    1999-03-30

    During metal forming process, lubricants are crucial to prevent direct contact, adhesion, transfer and scuffing of workpiece materials and tools. Boric acid films can be firmly adhered to the clean aluminum surfaces by spraying their methanol solutions and provide extremely low friction coefficient (about 0.04). The cohesion strengths of the bonded films vary with the types of aluminum alloys (6061, 6111 and 5754). The sheet metal forming tests indicate that boric acid films and the combined films of boric acid and mineral oil can create larger strains than the commercial liquid and solid lubricants, showing that they possess excellent lubricities for aluminum forming. SEM analyses indicate that boric acid dry films separate the workpiece and die materials, and prevent their direct contact and preserve their surface qualities. Since boric acid is non-toxic and easily removed by water, it can be expected that boric acid films are environmentally friendly, cost effective and very efficient lubricants for sheet aluminum cold forming.

  4. [Oral films as perspective dosage form].

    Science.gov (United States)

    Walicová, Veronika; Gajdziok, Jan

    Oral films, namely buccal mucoadhesive films and orodispersible films represent innovative formulations for administration of a wide range of drugs. Oral films show many advantageous properties and are intended for systemic drug delivery or for local treatment of the oral mucosa. In both cases, the film represents a thin layer, which could be intended to adhere to the oral mucosa by means of mucoadhesion; or to rapid dissolution and subsequent swallowing without the need of liquid intake, in the case of orodispersible films. Main constitutive excipients are film-forming polymers, which must in the case of mucoadhesive forms remain on the mucosa within the required time interval. Oral films are currently available on the pharmaceutical market and could compete with conventional oral dosage forms in the future. oral cavity oral films buccal mucoadhesive films orodispersible films film-forming polymers.

  5. THE LIABILITY FORMS OF THE MEDICAL PERSONNEL

    OpenAIRE

    Cristian, Bărcan

    2015-01-01

    Current legislation, namely Law no. 95/ 2006 on healthcare reform in the medical malpractice domain stipulates that medical staff can be held accountable in the following forms: disciplinary liability, administrative liability, civil liability and criminal liability.

  6. The method of minimal normal forms

    International Nuclear Information System (INIS)

    Mane, S.R.; Weng, W.T.

    1992-01-01

    Normal form methods for solving nonlinear differential equations are reviewed and the comparative merits of three methods are evaluated. The concept of the minimal normal form is explained and is shown to be superior to other choices. The method is then extended to apply to the evaluation of discrete maps of an accelerator or storage ring. Such an extension, as suggested in this paper, is more suited for accelerator-based applications than a formulation utilizing continuous differential equations. A computer code has been generated to systematically implement various normal form formulations for maps in two-dimensional phase space. Specific examples of quadratic and cubic nonlinear fields were used and solved by the method developed. The minimal normal form method shown here gives good results using relatively low order expansions

  7. Non-Coop Station History Forms Digest

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Single 71-page document entitled 'Station history non-COOP Keying Rules & Forms Digest,' dated December 12, 2003. Contractors with NCDC Climate Database...

  8. Color-kinematic duality for form factors

    International Nuclear Information System (INIS)

    Boels, Rutger H.; Kniehl, Bernd A.; Tarasov, Oleg V.; Yang, Gang

    2012-12-01

    Recently a powerful duality between color and kinematics has been proposed for integrands of scattering amplitudes in quite general gauge theories. In this paper the duality proposal is extended to the more general class of gauge theory observables formed by form factors. After a discussion of the general setup the existence of the duality is verified in two and three loop examples in four dimensional maximally supersymmetric Yang-Mills theory which involve the stress energy tensor multiplet. In these cases the duality reproduces known results in a particularly transparent and uniform way. As a non-trivial application we obtain a very simple form of the integrand of the four-loop two-point (Sudakov) form factor which passes a large set of unitarity cut checks.

  9. Revised Total Coliform Rule Lab Sampling Form

    Science.gov (United States)

    This form should be completed when a water system collects any required Revised Total Coliform Rule (RTCR) samples. It should also be used when collecting “Special” non-compliance samples for the RTCR.

  10. Laser based micro forming and assembly.

    Energy Technology Data Exchange (ETDEWEB)

    MacCallum, Danny O' Neill; Wong, Chung-Nin Channy; Knorovsky, Gerald Albert; Steyskal, Michele D.; Lehecka, Tom (Pennsylvania State University, Freeport, PA); Scherzinger, William Mark; Palmer, Jeremy Andrew

    2006-11-01

    It has been shown that thermal energy imparted to a metallic substrate by laser heating induces a transient temperature gradient through the thickness of the sample. In favorable conditions of laser fluence and absorptivity, the resulting inhomogeneous thermal strain leads to a measurable permanent deflection. This project established parameters for laser micro forming of thin materials that are relevant to MESA generation weapon system components and confirmed methods for producing micrometer displacements with repeatable bend direction and magnitude. Precise micro forming vectors were realized through computational finite element analysis (FEA) of laser-induced transient heating that indicated the optimal combination of laser heat input relative to the material being heated and its thermal mass. Precise laser micro forming was demonstrated in two practical manufacturing operations of importance to the DOE complex: micrometer gap adjustments of precious metal alloy contacts and forming of meso scale cones.

  11. A congenital form of junctional ectopic tachycardia.

    Science.gov (United States)

    Tulino, Domenico; Dattilo, Giuseppe; Tulino, Viviana; Marte, Filippo; Patanè, Salvatore

    2010-11-19

    Accessory pathways have been described as well as their Ecg identification criteria also in pediatric population. Radiofrequency ablation is a curative treatment but its application has been more limited in the paediatric population. The congenital form of junctional ectopic tachycardia was firstly described by Coumel et al. in 1976. It usually occurs in the first six months of life presenting as a persistent sustained form, lasting up to 90% of the time and it is hampered by high mortality. Its clinical presentation may be dramatic, being associated in up to 60% of cases with cardiomegaly and/or heart failure. Secondary dilated cardiomyopathy, ventricular fibrillation and sudden cardiac death have also been reported. We present a case of congenital form of junctional ectopic tachycardia in a 12-day-old newborn infant. Also this case is illustrative of the congenital form of junctional ectopic tachycardia. Copyright © 2008 Elsevier Ireland Ltd. All rights reserved.

  12. Ozone-forming potential of reformulated gasoline

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Geosciences, Environment and Resources; Division on Earth and Life Studies; National Research Council; National Academy of Sciences

    ...) technical aspects of various air-quality issues related to RFG assessment, and (3) the sensitivity of evaluations of the relative ozone-forming potentials to factors related to fuel properties and the variability of vehicle technologies and driving patterns.

  13. Genetics of monegenic forms of diabetes mellitus

    Directory of Open Access Journals (Sweden)

    Tamara Leonidovna Kuraeva

    2011-03-01

    Full Text Available It is universally recognized that autoimmune type 1 diabetes mellitus (DM is not the only form of this disease in children. Increasingly more children and adolescents present with DM2, MODY, and rarer syndromal forms of DM. The actual prevalence of DM other than DM1 in children and adolescents is unknown but may be estimated at 10%. Despite rare occurrence of genetic syndromes, they collectively account for almost 5% of DM cases among children. The rapid upgrowth of molecular biology opens up a wide range of possibilities for designating various symptom complexes as nosologically selfconsistent forms. New genetic syndromes associated with DM are annually described. It is important both to adequately identify and treat manifestations and complications of these syndromes in children and to provide relevant medico-genetic counseling and recommendations to the parents. Key words: non-immune diabetes mellitus, MODY, Wolfram syndrome, neonatal, syndromal forms

  14. Color-kinematic duality for form factors

    Energy Technology Data Exchange (ETDEWEB)

    Boels, Rutger H.; Kniehl, Bernd A.; Tarasov, Oleg V.; Yang, Gang [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

    2012-12-15

    Recently a powerful duality between color and kinematics has been proposed for integrands of scattering amplitudes in quite general gauge theories. In this paper the duality proposal is extended to the more general class of gauge theory observables formed by form factors. After a discussion of the general setup the existence of the duality is verified in two and three loop examples in four dimensional maximally supersymmetric Yang-Mills theory which involve the stress energy tensor multiplet. In these cases the duality reproduces known results in a particularly transparent and uniform way. As a non-trivial application we obtain a very simple form of the integrand of the four-loop two-point (Sudakov) form factor which passes a large set of unitarity cut checks.

  15. Make Projects Small Form Factor PCs

    CERN Document Server

    Wessels, Duane

    2006-01-01

    Shoebox sized and smaller, small-form-factor PCs can pack as much computing muscle as a full-sized desktop computer. They consumer less power, have few or no moving parts, and are very quiet. Whether you plan to use one as a standalone PC or want to embed it in your next hacking project, a small-form-factor PC can be a lot of fun to build. Make Projects: Small Form Factor PCs is the only book available that shows you how to build small-form-factor PCs -- from kits and from scratch -- that are more interesting and more personalized than what a full-sized PC can give you. Included in the book

  16. A European Humus Forms Reference Base

    Science.gov (United States)

    Zanella, A.; Englisch, M.; Ponge, J.-F.; Jabiol, B.; Sartori, G.; Gardi, C.

    2012-04-01

    From 2003 on, a panel of experts in humus and humus dynamics (Humus group) has been working about a standardisation and improvement of existing national humus classifications. Some important goals have been reached, in order to share data and experiences: a) definition of specific terms; b) description of 15 types of diagnostic horizons; c) of 10 basic humus forms references; d) subdivision of each main reference in 2-4 sub-unities; e) elaboration of a general European Humus Form Reference Base (http://hal-agroparistech.archives-ouvertes.fr/docs/00/56/17/95/PDF/Humus_Forms_ERB_31_01_2011.pdf); f) publication of the scientific significance of this base of classification as an article [A European morpho-functional classification of humus forms. Geoderma, 164 (3-4), 138-145]. The classification will be updated every 2 years and presently the Humus group is assessing biological (general: soil, vegetation, biome; specific: fungi, bacteria, pedofauna), physical (air temperature, rainfall) and chemical (pH, mineral elements, organic matter, quality and quantity of humic components…) factors which characterize basic humus forms and their varieties. The content of the new version of the classification is planned to be more "practical", like an ecological manual which lists associated humus forms and environmental data in the aim to contribute to a more precise environmental diagnosis of every analysed terrestrial and semiterrestrial European ecosystem. The Humus group is also involved in an endeavour to include humus forms in the World Reference Base for Soils (WRB-FAO) according to nomenclatural principles erected for soil profiles. Thirty basic references have been defined, complemented by a set of qualifiers (prefixes and suffixes), allowing to classify European humus forms and probably a large majority of humus forms known worldwide. The principles of the classification, the diagnostic horizons and humus forms main references are presented at the General Assembly of

  17. Innovative forming and fabrication technologies : new opportunities.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest

  18. SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN

    Energy Technology Data Exchange (ETDEWEB)

    Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

    2012-11-26

    This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

  19. ANTISTAPHYLOCOCCAL ACTIVITY OF LIPOSOMAL FORMS OF LINCOMYCIN

    Directory of Open Access Journals (Sweden)

    Derkach SA

    2015-04-01

    Full Text Available Nowadays the vital problem of modern medicine is a tendency to emerging of both nosocomial and community-acquired strains before antibiotic resistance forming. The complexity of antibiotic therapy of diseases caused by methicillin resistant staphylococci having high poly resistance almost to every classes of antibacterial agents is of prime importance. One of the ways to improve antibacterial preparations still remains the development of their liposomal forms. This work studies antistaphylococcal activity (according to MIC of the liposomal form of lincomycin developed in the Institute of Dermatology and Venereology of Ukraine by Ivanova N. N., the Candidate of Сhemical Sciences.The purpose of this research work was to study liposomal inhibiting concentration of the liposomalny form of lincomycin and a commercial preparation lincomycin (produced by CJSC “Pharmaceutical firm "Darnitsa". Determination of the minimum inhibiting concentration was carried out by a tablet micromethod by consecutive cultivations of the samples under study.It is shown that MIC of liposomal lincomycin is eight times as low as usual lincomycin (0,23mkg/ml to 1,87 mkg/ml. Antibacterial activity of the liposomal form of lincomycin is studied concerning the patients selected from the different biotopes with pyo inflammatory diseases of staphylococcus strains (15 strains – methicillin sensitive, 12 strains - methicillin resistant.It is shown authentically the higher sensitivity of S. aureus strains to the liposomal form of lincomycin in comparison with usual lincomycin . Also 50.0% of MRSA strains were sensitive to the liposomalny form of lincomycin that shows the perspective for the development of the liposomal forms of antibiotics to cure staphylococcal infections.

  20. Reciprocal mass tensor : a general form

    International Nuclear Information System (INIS)

    Roy, C.L.

    1978-01-01

    Using the results of earlier treatment of wave packets, a general form of reciprocal mass tensor has been obtained. The elements of this tensor are seen to be dependent on momentum as well as space coordinates of the particle under consideration. The conditions under which the tensor would reduce to the usual space-independent form, are discussed and the impact of the space-dependence of this tensor on the motion of Bloch electrons, is examined. (author)

  1. Leaching of nuclear power reactor wastes forms

    International Nuclear Information System (INIS)

    Endo, L.S.; Villalobos, J.P.; Miyamoto, H.

    1986-01-01

    The leaching tests for power reactor wastes carried out at IPEN/CNEN-SP are described. These waste forms consist mainly of spent resins and boric acid concentrates solidified in ordinary Portland cement. All tests were conducted according to the ISO and IAEA recommendations. 3 years leaching results are reported, determining cesium and strontium diffusivity coefficients for boric acid waste form and ion-exchange resins. (Author) [pt

  2. Thermal behaviour modelling of superplastic forming tools

    OpenAIRE

    Velay , Vincent; Cutard , Thierry; Guegan , N.

    2008-01-01

    High-temperature operational conditions of super plastic forming (SPF) tools induce very complex thermomechanical loadings responsible to their failure. Various materials can be used to manufacture forming tools: ceramic, refractory castable or heat resistant steel. In this paper, an experimental and numerical analysis is performed in order to characterise the environmental loadings undergone by the tool whatever the considered material. This investigation allows to lead a thermal calculation...

  3. Dendritic growth forms of borax crystals

    International Nuclear Information System (INIS)

    Takoo, R.K.; Patel, B.R.; Joshi, M.S.

    1983-01-01

    A variety of dendritic forms of borax grown from solutions by the film formation method is given. The changing growth morphology is followed as a function of concentration and temperature. The initial, intermediate and final growth morphologies are described and discussed. Influence of evaporation rate and supersaturation on the mechanism of growth is assessed. It is suggested that under all crystallization conditions, borax crystals have dendritic form in the initial stages of growth. (author)

  4. Structural Encoding of Static Single Assignment Form

    DEFF Research Database (Denmark)

    Gal, Andreas; Probst, Christian; Franz, Michael

    2005-01-01

    Static Single Assignment (SSA) form is often used as an intermediate representation during code optimization in Java Virtual Machines. Recently, SSA has successfully been used for bytecode verification. However, constructing SSA at the code consumer is costly. SSAbased mobile code transport formats...... Java bytecode. While the resulting bytecode sequence can still be directly executed by traditional Virtual Machines, our novel VM can infer SSA form and confirm its safety with virtually no overhead....

  5. Surgical documentation form for TMJ arthroscopy.

    Science.gov (United States)

    Mosby, E L; Cline, M P

    1995-02-01

    The use of a form to document the findings observed during arthroscopy of the temporomandibular joint will allow oral and maxillofacial surgeons not only to consistently record the abnormal observations but also to compare their findings with the findings of other surgeons and possibly even establish a national database. The form presented has been used by the author for 6 years with periodic modification and has provided a means to review and evaluate surgical findings in patients who had arthroscopic procedures.

  6. Dirichlet forms and symmetric Markov processes

    CERN Document Server

    Oshima, Yoichi; Fukushima, Masatoshi

    2010-01-01

    Since the publication of the first edition in 1994, this book has attracted constant interests from readers and is by now regarded as a standard reference for the theory of Dirichlet forms. For the present second edition, the authors not only revised the existing text, but also added some new sections as well as several exercises with solutions. The book addresses to researchers and graduate students who wish to comprehend the area of Dirichlet forms and symmetric Markov processes.

  7. Silicon nitride-fabrication, forming and properties

    International Nuclear Information System (INIS)

    Yehezkel, O.

    1983-01-01

    This article, which is a literature survey of the recent years, includes description of several methods for the formation of silicone nitride, and five methods of forming: Reaction-bonded silicon nitride, sintering, hot pressing, hot isostatic pressing and chemical vapour deposition. Herein are also included data about mechanical and physical properties of silicon nitride and the relationship between the forming method and the properties. (author)

  8. Readability of Invasive Procedure Consent Forms.

    Science.gov (United States)

    Eltorai, Adam E M; Naqvi, Syed S; Ghanian, Soha; Eberson, Craig P; Weiss, Arnold-Peter C; Born, Christopher T; Daniels, Alan H

    2015-12-01

    Informed consent is a pillar of ethical medicine which requires patients to fully comprehend relevant issues including the risks, benefits, and alternatives of an intervention. Given the average reading skill of US adults is at the 8th grade level, the American Medical Association (AMA) and the National Institutes of Health (NIH) recommend patient information materials should not exceed a 6th grade reading level. We hypothesized that text provided in invasive procedure consent forms would exceed recommended readability guidelines for medical information. To test this hypothesis, we gathered procedure consent forms from all surgical inpatient hospitals in the state of Rhode Island. For each consent form, readability analysis was measured with the following measures: Flesch Reading Ease Formula, Flesch-Kincaid Grade Level, Fog Scale, SMOG Index, Coleman-Liau Index, Automated Readability Index, and Linsear Write Formula. These readability scores were used to calculate a composite Text Readability Consensus Grade Level. Invasive procedure consent forms were found to be written at an average of 15th grade level (i.e., third year of college), which is significantly higher than the average US adult reading level of 8th grade (p < 0.0001) and the AMA/NIH recommended readability guidelines for patient materials of 6th grade (p < 0.0001). Invasive procedure consent forms have readability levels which makes comprehension difficult or impossible for many patients. Efforts to improve the readability of procedural consent forms should improve patient understanding regarding their healthcare decisions. © 2015 Wiley Periodicals, Inc.

  9. Radionuclide Retention in Concrete Waste Forms

    Energy Technology Data Exchange (ETDEWEB)

    Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

    2010-09-30

    Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

  10. Directory of Energy Data Collection Forms: Forms in use as of October 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

  11. Relationship Domain of Form Six Teachers Thinking in Teaching with External Factors of Form Six Teachers

    Science.gov (United States)

    bin Pet, Mokhtar; Sihes, Ahmad Johari Hj

    2015-01-01

    This study aims to examine the external factors of form six teachers who can influence thinking domain form six teachers in their teaching. This study was conducted using a quantitative approach using questionnaires. A total of 300 form six teacher schools in Johor were chosen as respondents. The findings were obtained as student background…

  12. Stainless steel-zirconium alloy waste forms

    International Nuclear Information System (INIS)

    McDeavitt, S.M.; Abraham, D.P.; Keiser, D.D. Jr.; Park, J.Y.

    1996-01-01

    An electrometallurgical treatment process has been developed by Argonne National Laboratory to convert various types of spent nuclear fuels into stable storage forms and waste forms for repository disposal. The first application of this process will be to treat spent fuel alloys from the Experimental Breeder Reactor-II. Three distinct product streams emanate from the electrorefining process: (1) refined uranium; (2) fission products and actinides extracted from the electrolyte salt that are processed into a mineral waste form; and (3) metallic wastes left behind at the completion of the electrorefining step. The third product stream (i.e., the metal waste stream) is the subject of this paper. The metal waste stream contains components of the chopped spent fuel that are unaffected by the electrorefining process because of their electrochemically ''noble'' nature; this includes the cladding hulls, noble metal fission products (NMFP), and, in specific cases, zirconium from metal fuel alloys. The selected method for the consolidation and stabilization of the metal waste stream is melting and casting into a uniform, corrosion-resistant alloy. The waste form casting process will be carried out in a controlled-atmosphere furnace at high temperatures with a molten salt flux. Spent fuels with both stainless steel and Zircaloy cladding are being evaluated for treatment; thus, stainless steel-rich and Zircaloy-rich waste forms are being developed. Although the primary disposition option for the actinides is the mineral waste form, the concept of incorporating the TRU-bearing product into the metal waste form has enough potential to warrant investigation

  13. Data Collection Outcomes Comparing Paper Forms With PDA Forms in an Office-Based Patient Survey

    Science.gov (United States)

    Galliher, James M.; Stewart, Thomas V.; Pathak, Paramod K.; Werner, James J.; Dickinson, L. Miriam; Hickner, John M.

    2008-01-01

    PURPOSE We compared the completeness of data collection using paper forms and using electronic forms loaded on handheld computers in an office-based patient interview survey conducted within the American Academy of Family Physicians National Research Network. METHODS We asked 19 medical assistants and nurses in family practices to administer a survey about pneumococcal immunizations to 60 older adults each, 30 using paper forms and 30 using electronic forms on handheld computers. By random assignment, the interviewers used either the paper or electronic form first. Using multilevel analyses adjusted for patient characteristics and clustering of forms by practice, we analyzed the completeness of the data. RESULTS A total of 1,003 of the expected 1,140 forms were returned to the data center. The overall return rate was better for paper forms (537 of 570, 94%) than for electronic forms (466 of 570, 82%) because of technical difficulties experienced with electronic data collection and stolen or lost handheld computers. Errors of omission on the returned forms, however, were more common using paper forms. Of the returned forms, only 3% of those gathered electronically had errors of omission, compared with 35% of those gathered on paper. Similarly, only 0.04% of total survey items were missing on the electronic forms, compared with 3.5% of the survey items using paper forms. CONCLUSIONS Although handheld computers produced more complete data than the paper method for the returned forms, they were not superior because of the large amount of missing data due to technical difficulties with the hand-held computers or loss or theft. Other hardware solutions, such as tablet computers or cell phones linked via a wireless network directly to a Web site, may be better electronic solutions for the future. PMID:18332408

  14. Method of forming aluminum oxynitride material and bodies formed by such methods

    Science.gov (United States)

    Bakas, Michael P [Ammon, ID; Lillo, Thomas M [Idaho Falls, ID; Chu, Henry S [Idaho Falls, ID

    2010-11-16

    Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

  15. Temperature influence on the life cycle and forming of various forms of Frankliniella occidentalis (Thysanoptera: Thripidae

    Directory of Open Access Journals (Sweden)

    O. I. Slobodenyuk

    2006-10-01

    Full Text Available The research results of forming various forms of the western flower thrips in greenhouse’s vegetable phytocenoses and of the temperature influence on the life cycle of Frankliniella occidentalis are presented. It was established that dark forms of the thrips species predominate in phytocenosis of Lycopersicon genus but light forms of the pest predominate in phytocenosis of Cucumis genus. It was proved experimentally in laboratory that when the temperature decreases, the percentage of the dark forms of Frankliniella occidentalis substantially increases and full development cycle from an egg to imago becomes longer.

  16. The Landscape Form of the Metropolis

    Directory of Open Access Journals (Sweden)

    René van der Velde

    2014-07-01

    Full Text Available When the city disintegrates into an archipelago of fragments a new role is imposed on the landscape as a carrier of topographical characterizations, cohesion and continuity. Patterns such as transportation corridors, settlement areas and landscape voids can be regarded as latent macro-landscape forms of the metropolitan territory. In the staging of the metropolis these forms need to be embedded in a compositional structure that addresses fragmentation and disorientation, without relapsing into utopian forms of the traditional city that have proven inadequate for the metropolitan condition.The potential basis to inform this structure is the landscape itself: permanent, neutral and ubiquitous. The underlying landscape also contains an annotated catalogue of situations, in which the genius loci is recorded and secured. These latent compositional elements are transformed into landscape architectural ‘narratives’ within the topography of the emerging metropolis. The enlargement and distortion of specific topographies result in a field of new topologies, drawn from the genius loci and from local cultures and customs. The question is not so much if metropolitan form is determined by landscape, but how we can use it to structure and give meaning to dispersed territories. This involves a delicate choreography of macro-landscape forms and the micro-topography of landscape places. 

  17. DWPF waste form compliance plan (Draft Revision)

    International Nuclear Information System (INIS)

    Plodinec, M.J.; Marra, S.L.

    1991-01-01

    The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970's, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan

  18. Waste Form Evaluation Program. Final report

    International Nuclear Information System (INIS)

    Franz, E.M.; Colombo, P.

    1985-09-01

    This report presents data that can be used to assess the acceptability of polyethylene and modified sulfur cement waste forms to meet the requirements of 10 CFR 61. The waste streams selected for this study include dry evaporator concentrate salts and incinerator ash as representative wastes which result from advanced volume reduction technologies and ion exchange resins which remain problematic for solidification using commercially available matrix materials. Property evaluation tests such as compressive strength, water immersion, thermal cycling, irradiation, biodegradation and leachability were conducted for polyethylene and sulfur cement waste forms over a range of waste-to-binder ratios. Based on the results of the tests, optimal waste loadings of 70 wt % sodium sulfate, 50 wt % boric acid, 40 wt % incinerator ash and 30 wt % ion exchange resins were established for polyethylene, although maximum loadings were considerably higher. For modified sulfur cement, optimal loadings of 40 wt % sodium sulfate, 40 wt % boric acid and 40 wt % incinerator ash are reported. Ion exchange resins are not recommended for incorporation into modified sulfur cement because of poor waste form performance even at very low waste concentrations. The results indicate that all waste forms tested within the range of optimal waste concentrations satisifed the requirements of the NRC Technical Position Paper on Waste Form

  19. Factorization of the Ising model form factors

    International Nuclear Information System (INIS)

    Assis, M; McCoy, B M; Maillard, J-M

    2011-01-01

    We present a general method for analytically factorizing the n-fold form factor integrals f (n) N,N (t) for the correlation functions of the Ising model on the diagonal in terms of the hypergeometric functions 2 F 1 ([1/2, N + 1/2]; [N + 1]; t) which appear in the form factor f (1) N,N (t). New quadratic recursion and quartic identities are obtained for the form factors for n = 2, 3. For n = 2, 3, 4 explicit results are given for the form factors. These factorizations are proved for all N for n = 2, 3. These results yield the emergence of palindromic polynomials canonically associated with elliptic curves. As a consequence, understanding the form factors amounts to describing and understanding an infinite set of palindromic polynomials, canonically associated with elliptic curves. From an analytical viewpoint the relation of these palindromic polynomials with hypergeometric functions associated with elliptic curves is made very explicitly, and from a differential algebra viewpoint this corresponds to the emergence of direct sums of differential operators homomorphic to symmetric powers of a second order operator associated with elliptic curve.

  20. Size-dependent variation in plant form.

    Science.gov (United States)

    Niklas, Karl J; Cobb, Edward D

    2017-09-11

    The study of organic form has a long and distinguished history going at least as far back as Aristotle's Historia Anima¯lium, wherein he identified five basic biological processes that define the forms of animals (metabolism, temperature regulation, information processing, embryo development, and inheritance). Unfortunately, all of Aristotle's writings about plant forms are lost. We know of them only indirectly from his student Theophrastus's companion books, collectively called Historia Plantarum, wherein plant forms are categorized into annual herbs, herbaceous perennials, shrubs, and trees. The study of plant forms did not truly begin until the romantic poet and naturalist Goethe proposed the concept of a hypothetical 'Plant Archetype', declared "Alles ist Blatt", and first coined the word morphologie, which inspired the French anatomist Cuvier (who established the field of comparative morphology), the English naturalist Darwin (who saw his theory of evolution reinforced by it), and the Scottish mathematician D'Arcy Thompson (who attempted to quantify it). Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Normal Forms for Reduced Stochastic Climate Models

    Science.gov (United States)

    Franzke, C.; Majda, A.; Crommelin, D.

    2009-04-01

    The systematic development of reduced low-dimensional stochastic climate models from observations or comprehensive high-dimensional climate models is an important topic for low-frequency variability, climate sensitivity, and improved extended range forecasting. Here techniques from applied mathematics are utilized to systematically derive normal forms for reduced stochastic climate models for low-frequency variables. The use of a few Empirical Orthogonal Functions (EOF) depending on observational data to span the low-frequency subspace requires the assessment of dyad interactions besides the more familiar triads in the interaction between the low- and high-frequency subspaces of the dynamics. It will be shown that the dyad and multiplicative triad interactions combine with the climatological linear operator interactions to simultaneously produce both strong nonlinear dissipation and Correlated Additive and Multiplicative (CAM) stochastic noise. For a single low-frequency variable the dyad interactions and climatological linear operator alone produce a normal form with CAM noise from advection of the large-scales by the small scales and simultaneously strong cubic damping. This normal form should prove useful for developing systematic regression fitting strategies for stochastic models of climate data. The validity of the one and two dimensional normal forms will be presented. Also the analytical PDF form for one-dimensional reduced models will be derived. This PDF can exhibit power-law decay only over a limited range and its ultimate decay is determined by the cubic damping. This cubic damping produces a Gaussian tail.

  2. Magnetic form factors of the trinucleons

    Energy Technology Data Exchange (ETDEWEB)

    Schiavilla, R; Pandharipande, V R; Riska, Dan-Olof

    1989-11-01

    The magnetic form factors of 3H and 3He are calculated with the Monte Carlo method from variational ground-state wave functions obtained for the Argonne and Urbana two- and three-nucleon interactions. The electromagnetic current operator contains one- and two-body terms that are constructed so as to satisfy the continuity equation with the two-nucleon potential in the Hamiltonian. The results obtained with the Argonne two-nucleon interaction are in overall agreement with the empirical values. It appears that the remaining theoretical uncertainty, in the calculation of these form factors from a given interaction model, is dominated by that in the electromagnetic form factors of the nucleon. It is found that the isovector magnetic form factors are rather sensitive to the details of the isospin-dependent tensor force, and they are much better reproduced with the Argonne than the Urbana potential. The isoscalar magnetic form factors appear to be sensitive to the spin-orbit interactions, and are better reproduced with the Urbana potential. The Argonne potential has a stronger τ1∙τ2 tensor force, while the Urbana one has a shorter-range spin-orbit interaction.

  3. Directory of energy data collection forms. Forms in use as of October 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

  4. Differential forms and the noncommutative residue

    Science.gov (United States)

    Ugalde, William J.

    2008-12-01

    For a pseudo-differential operator S of order 0 acting on sections of a vector bundle B on a compact manifold M without boundary, we associate a differential form of order dimension of M acting on C∞(M)×C∞(M). This differential form Ω is given in terms of the noncommutative 1-density res([S,f][S,h]). In the particular case of an even-dimensional, compact, conformal manifold without boundary, we study this differential form for the case (B,S)=(H,F), that is, the Fredholm module associated by Connes [A. Connes, Quantized calculus and applications, in: XIth International Congress of Mathematical Physics (Paris, 1994), Internatl. Press, Cambridge, MA, 1995, pp. 15-36] to the manifold M. We give its explicit expression in the flat case and we address a possible approach to the computations for the general case.

  5. Nanofiber electrode and method of forming same

    Energy Technology Data Exchange (ETDEWEB)

    Pintauro, Peter N.; Zhang, Wenjing

    2018-02-27

    In one aspect, a method of forming an electrode for an electrochemical device is disclosed. In one embodiment, the method includes the steps of mixing at least a first amount of a catalyst and a second amount of an ionomer or uncharged polymer to form a solution and delivering the solution into a metallic needle having a needle tip. The method further includes the steps of applying a voltage between the needle tip and a collector substrate positioned at a distance from the needle tip, and extruding the solution from the needle tip at a flow rate such as to generate electrospun fibers and deposit the generated fibers on the collector substrate to form a mat with a porous network of fibers. Each fiber in the porous network of the mat has distributed particles of the catalyst. The method also includes the step of pressing the mat onto a membrane.

  6. The Form Factors of the Nucleons

    Energy Technology Data Exchange (ETDEWEB)

    Perdrisat, Charles F. [William and Mary College, JLAB

    2013-11-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has been greatly improved by performing double-polarization experiments, in comparison with with pre-vious unpolarized cross section data. Here we will review the experimental data base in view of the new results for the proton and the neutron, obtained at MIT-Bates, JLab and MAMI. The rapid evolution of phenomenological models triggered by these high- precision experiments will be discussed. In particular, the possibility that the proton is non-spherical in its ground state, and that the transverse charge density are model in- dependently defined in the infinite momentum frame. Likewise, flavor decomposition of the nucleon form factors into dressed u and d quark form factors, may give information about the quark-diquark structure of the nucleon. The current proton radius "crisis" will also be discussed.

  7. Charm form factors in hadronic interactions

    International Nuclear Information System (INIS)

    Bracco, M. E.; Navarra, F. S.; Nielsen, M.; Chiapparini, M.

    2010-01-01

    We calculate the form factors and the coupling constants in vertices with charm mesons, such as ρD*D*, in the framework of QCD sum rules. We first discuss the applications of these form factors in heavy ion collisions and in B decays. We then present an introduction to the method of QCD sum rules and describe how to work with the three-point function. We give special attention to the procedure employed to extrapolate results obtained in the deep euclidean region to the poles of the particles, located in the time-like region. Finally we present a table of ready-to-use parametrizations of all the form factors, which are relevant for the processes mentioned in the introduction. We also give the coupling constants.

  8. Nucleon form factors in the nuclear medium

    Science.gov (United States)

    Park, Chanyong; Lee, Jung Hun

    2018-01-01

    By using the AdS/CFT correspondence, we investigate various form factors between nucleons and mesons in a nuclear medium. In order to describe a nuclear medium holographically, we take into account the thermal charged AdS geometry with an appropriate IR cutoff. After introducing an anomalous dimension as a free parameter, we investigate how the nucleon’s mass is affected by the change of the anomalous dimension. Moreover, we study how the form factors of nucleons rely on the properties of the nuclear medium. We show that in a nuclear medium with different numbers of proton and neutron, the degenerated nucleon form factor in the vacuum is split into four different values depending on the isospin charges of nucleon and meson.

  9. Nucleon and Deuteron Form Factors from BLAST

    International Nuclear Information System (INIS)

    Hasell, D. K.

    2009-01-01

    The BLAST experiment was designed to study in a systematic manner the spin-dependent, electromagnetic interaction on hydrogen and deuterium. Measuring only asymmetries in electron scattering with respect to the beam helicity, target spin, or both; the BLAST experiment was able to extract information on nucleon and deuteron form factors independent of beam intensity or target density. By further forming 'super-ratios' of asymmetries, measurements were possible independent of beam and target polarization thus reducing uncertainties due to these quantities as well. Some of the form factor results from BLAST will be briefly presented here. Also, in response to observed discrepancies between polarization measurements and those obtained using traditional Rosenbluth separation techniques a proposed experiment, OLYMPUS, which will use the BLAST detector to measure the two photon contribution to elastic electron scattering will also be presented.

  10. Tolerancing free-form optics for illumination

    Science.gov (United States)

    Timinger, A.; Unterhinninghofen, J.; Junginger, S.; Hofmann, A.

    2011-10-01

    Free form surfaces allow elegant solutions in illumination optics. A complex function of the system can be achieved by a single optical element. Free form elements are usually manufactured by reproduction techniques, such as injection moulding of plastic. Manufacturing tolerances are crucial to maintain the required function while at the same time yielding the lowest possible price. We implemented a Monte Carlo tolerancing method for illumination systems. Tolerances include shape deviations of optical elements and assembly tolerances. In the absence of standards for free form tolerances and illumination optics tolerancing, communication between optics design, manufacturing and testing is often inefficient. In order to enable a highly automated evaluation of part measurement data to assess compliance with tolerances, we developed an approach to combine information from optics design, mechanical construction, manufacturing and testing into one continuous data chain. The research project is granted by the German Ministry of Education and Research.

  11. Density of Spray-Formed Materials

    Energy Technology Data Exchange (ETDEWEB)

    Kevin M. McHugh; Volker Uhlenwinkel; Nils Ellendr

    2008-06-01

    Spray Forming is an advanced materials processing technology that transforms molten metal into a near-net-shape solid by depositing atomized droplets onto a substrate. Depending on the application, the spray-formed material may be used in the as-deposited condition or it may undergo post-deposition processing. Regardless, the density of the as-deposited material is an important issue. Porosity is detrimental because it can significantly reduce strength, toughness, hardness and other properties. While it is not feasible to achieve fully-dense material in the as-deposited state, density greater than 99% of theoretical density is possible if the atomization and impact conditions are optimized. Thermal conditions at the deposit surface and droplet impact angle are key processing parameters that influence the density of the material. This paper examines the factors that contribute to porosity formation during spray forming and illustrates that very high as-deposited density is achieved by optimizing processing parameters.

  12. Oligomer functionalized nanotubes and composites formed therewith

    Science.gov (United States)

    Zettl, Alexander K; Sainsbury, Toby; Frechet, Jean M.J.

    2014-03-18

    Disclosed herein is a sequential functionalization methodology for the covalent modification of nanotubes with between one and four repeat units of a polymer. Covalent attachment of oligomer units to the surface of nanotubes results in oligomer units forming an organic sheath around the nanotubes, polymer-functionalized-nanotubes (P-NTs). P-NTs possess chemical functionality identical to that of the functionalizing polymer, and thus provide nanoscale scaffolds which may be readily dispersed within a monomer solution and participate in the polymerization reaction to form a polymer-nanotube/polymer composite. Formation of polymer in the presence of P-NTs leads to a uniform dispersion of nanotubes within the polymer matrix, in contrast to aggregated masses of nanotubes in the case of pristine-NTs. The covalent attachment of oligomeric units to the surface of nanotubes represents the formation of a functional nanoscale building block which can be readily dispersed and integrated within the polymer to form a novel composite material.

  13. Mixed low-level waste form evaluation

    International Nuclear Information System (INIS)

    Pohl, P.I.; Cheng, Wu-Ching; Wheeler, T.; Waters, R.D.

    1997-01-01

    A scoping level evaluation of polyethylene encapsulation and vitreous waste forms for safe storage of mixed low-level waste was performed. Maximum permissible radionuclide concentrations were estimated for 15 indicator radionuclides disposed of at the Hanford and Savannah River sites with respect to protection of the groundwater and inadvertent intruder pathways. Nominal performance improvements of polyethylene and glass waste forms relative to grout are reported. These improvements in maximum permissible radionuclide concentrations depend strongly on the radionuclide of concern and pathway. Recommendations for future research include improving the current understanding of the performance of polymer waste forms, particularly macroencapsulation. To provide context to these estimates, the concentrations of radionuclides in treated DOE waste should be compared with the results of this study to determine required performance

  14. Timeability in Extensive-Form Games

    DEFF Research Database (Denmark)

    Jakobsen, Sune K.; Sørensen, Troels Bjerre; Conitzer, Vincent

    2016-01-01

    Extensive-form games constitute the standard representation scheme for games with a temporal component. But do all extensive-form games correspond to protocols that we can implement in the real world? We often rule out games with imperfect recall, which prescribe that an agent forget something...... that she knew before. In this paper, we show that even some games with perfect recall can be problematic to implement. Specifically, we show that if the agents have a sense of time passing (say, access to a clock), then some extensive-form games can no longer be implemented; no matter how we attempt...... to time the game, some information will leak to the agents that they are not supposed to have. We say such a game is not exactly timeable. We provide easy-to-check necessary and sufficient conditions for a game to be exactly timeable. Most of the technical depth of the paper concerns how to approximately...

  15. Transuranic waste management program waste form development

    International Nuclear Information System (INIS)

    Bennett, W.S.; Crisler, L.R.

    1981-01-01

    To ensure that all technology necessary for long term management of transuranic (TRU) wastes is available, the Department of Energy has established the Transuranic Waste Management Program. A principal focus of the program is development of waste forms that can accommodate the very diverse TRU waste inventory and meet geologic isolation criteria. The TRU Program is following two approaches. First, decontamination processes are being developed to allow removal of sufficient surface contamination to permit management of some of the waste as low level waste. The other approach is to develop processes which will allow immobilization by encapsulation of the solids or incorporate head end processes which will make the solids compatible with more typical waste form processes. The assessment of available data indicates that dewatered concretes, synthetic basalts, and borosilicate glass waste forms appear to be viable candidates for immobilization of large fractions of the TRU waste inventory in a geologic repository

  16. Urban Form, Air Pollution, and Health.

    Science.gov (United States)

    Hankey, Steve; Marshall, Julian D

    2017-12-01

    Urban form can impact air pollution and public health. We reviewed health-related articles that assessed (1) the relationships among urban form, air pollution, and health as well as (2) aspects of the urban environment (i.e., green space, noise, physical activity) that may modify those relationships. Simulation and empirical studies demonstrate an association between compact growth, improved regional air quality, and health. Most studies are cross-sectional and focus on connections between transportation emissions and land use. The physical and mental health impacts of green space, public spaces that promote physical activity, and noise are well-studied aspects of the urban environment and there is evidence that these factors may modify the relationship between air pollution and health. Urban form can support efforts to design clean, health-promoting cities. More work is needed to operationalize specific strategies and to elucidate the causal pathways connecting various aspects of health.

  17. Pore-forming toxins in Cnidaria.

    Science.gov (United States)

    Podobnik, Marjetka; Anderluh, Gregor

    2017-12-01

    The ancient phylum of Cnidaria contains many aquatic species with peculiar lifestyle. In order to survive, these organisms have evolved attack and defense mechanisms that are enabled by specialized cells and highly developed venoms. Pore-forming toxins are an important part of their venomous arsenal. Along some other types, the most representative are examples of four protein families that are commonly found in other kingdoms of life: actinoporins, Cry-like proteins, aerolysin-like toxins and MACPF/CDC toxins. Some of the homologues of pore-forming toxins may serve other functions, such as in food digestion, development and response against pathogenic organisms. Due to their interesting physico-chemical properties, the cnidarian pore-forming toxins may also serve as tools in medical research and nanobiotechnological applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Method of forming an HTS article

    Science.gov (United States)

    Bhattacharya, Raghu N.; Zhang, Xun; Selvamanickam, Venkat

    2014-08-19

    A method of forming a superconducting article includes providing a substrate tape, forming a superconducting layer overlying the substrate tape, and depositing a capping layer overlying the superconducting layer. The capping layer includes a noble metal and has a thickness not greater than about 1.0 micron. The method further includes electrodepositing a stabilizer layer overlying the capping layer using a solution that is non-reactive to the superconducting layer. The superconducting layer has an as-formed critical current I.sub.C(AF) and a post-stabilized critical current I.sub.C(PS). The I.sub.C(PS) is at least about 95% of the I.sub.C(AF).

  19. A simple algorithm for computing canonical forms

    Science.gov (United States)

    Ford, H.; Hunt, L. R.; Renjeng, S.

    1986-01-01

    It is well known that all linear time-invariant controllable systems can be transformed to Brunovsky canonical form by a transformation consisting only of coordinate changes and linear feedback. However, the actual procedures for doing this have tended to be overly complex. The technique introduced here is envisioned as an on-line procedure and is inspired by George Meyer's tangent model for nonlinear systems. The process utilizes Meyer's block triangular form as an intermedicate step in going to Brunovsky form. The method also involves orthogonal matrices, thus eliminating the need for the computation of matrix inverses. In addition, the Kronecker indices can be computed as a by-product of this transformation so it is necessary to know them in advance.

  20. Local forms of governance in Denmark

    DEFF Research Database (Denmark)

    Torfing, Jacob

    2010-01-01

    The proliferation of local forms of governance problematizes the well-established and highly normative idea that power and democracy in Denmark are organized in terms of a 'parliamentary chain of government', according to which the sovereign people elect the parliament, which in turn controls...... the government that governs the public administration through bureaucratic control. Consecutive waves of devolution have decentralized the Danish welfare state, and the power of local governments is now being challenged by the emergence of new forms of local governance that involve a plethora of private...... stakeholders, such as business firms, interest organizations, community groups and individual citizens, in the formulation and implementation of public policy. This article argues that participation of private stakeholders in public policy-making cannot be reduced to an inferior supplement to traditional forms...

  1. Form coefficient of helical toroidal solenoids

    International Nuclear Information System (INIS)

    Amelin, V.Z.; Kunchenko, V.B.

    1982-01-01

    For toroidal solenoids with continuous spiral coil, winded according to the laws of equiinclined and simple cylindrical spirals with homogeneous, linearly increasing to the coil periphery and ''Bitter'' distribution of current density, the analytical expressions for the dependence between capacity consumed and generated magnetic field, expressions for coefficients of form similar to Fabry coefficient for cylindrical solenoids are obtained and dependence of the form coefficient and relative volume of solenoid conductor on the number of revolutions of screw line per one circumvention over the large torus radius is also investigated. Analytical expressions of form coefficients and graphical material permit to select the optimum geometry as to capacity consumed both for spiral (including ''force-free'') and conventional toroidal solenoids of magnetic systems in thermonulear installations

  2. Dynamic normal forms and dynamic characteristic polynomial

    DEFF Research Database (Denmark)

    Frandsen, Gudmund Skovbjerg; Sankowski, Piotr

    2011-01-01

    We present the first fully dynamic algorithm for computing the characteristic polynomial of a matrix. In the generic symmetric case, our algorithm supports rank-one updates in O(n2logn) randomized time and queries in constant time, whereas in the general case the algorithm works in O(n2klogn......) randomized time, where k is the number of invariant factors of the matrix. The algorithm is based on the first dynamic algorithm for computing normal forms of a matrix such as the Frobenius normal form or the tridiagonal symmetric form. The algorithm can be extended to solve the matrix eigenproblem...... with relative error 2−b in additional O(nlog2nlogb) time. Furthermore, it can be used to dynamically maintain the singular value decomposition (SVD) of a generic matrix. Together with the algorithm, the hardness of the problem is studied. For the symmetric case, we present an Ω(n2) lower bound for rank...

  3. AI applications in sheet metal forming

    CERN Document Server

    Hussein, Hussein

    2017-01-01

    This book comprises chapters on research work done around the globe in the area of artificial intelligence (AI) applications in sheet metal forming. The first chapter offers an introduction to various AI techniques and sheet metal forming, while subsequent chapters describe traditional procedures/methods used in various sheet metal forming processes, and focus on the automation of those processes by means of AI techniques, such as KBS, ANN, GA, CBR, etc. Feature recognition and the manufacturability assessment of sheet metal parts, process planning, strip-layout design, selecting the type and size of die components, die modeling, and predicting die life are some of the most important aspects of sheet metal work. Traditionally, these activities are highly experience-based, tedious and time consuming. In response, researchers in several countries have applied various AI techniques to automate these activities, which are covered in this book. This book will be useful for engineers working in sheet metal industri...

  4. Low temperatue ceramic radioactive waste form

    International Nuclear Information System (INIS)

    Roy, D.M.; Scheetz, B.E.; Grutzeck, M.W.; Sarkar, A.K.; Atkinson, S.D.

    1979-01-01

    Preliminary research on low temperature ceramic waste forms based upon modified calcium silicate and aluminate cements is described. Compositional and reaction variations, modified to achieve a strongly consolidated waste form which is reistant to significant change under the anticipated ambient, have been investigated. Extending previous studies in this laboratory, the recent work has utilized combinations of calcium aluminate cements and high early strength portland cements, different supercalcine waste formulations, and other additives. Both modified conventional cement composite consolidation methods and low-temperature hot-pressing methods were used to incorporate the supercalcine into a consolidated form. Products after initial consolidation and after drastic accelerated leaching treatment (hydrothermal leaching) were characterized. Uranium and simulated transuranics were found to be highly resistant to leaching; strontium was relatively resistant in many cases; and cesium leaching was found to be compositionally dependent. 8 tables

  5. Paramagnetic form factors from itinerant electron theory

    International Nuclear Information System (INIS)

    Cooke, J.F.; Liu, S.H.; Liu, A.J.

    1985-01-01

    Elastic neutron scattering experiments performed over the past two decades have provided accurate information about the magnetic form factors of paramagnetic transition metals. These measurements have traditionally been analyzed in terms of an atomic-like theory. There are, however, some cases where this procedure does not work, and there remains the overall conceptual problem of using an atomistic theory for systems where the unpaired-spin electrons are itinerant. We have recently developed computer codes for efficiently evaluating the induced magnetic form factors of fcc and bcc itinerant electron paramagnets. Results for the orbital and spin contributions have been obtained for Cr, Nb, V, Mo, Pd, and Rh based on local density bands. By using calculated spin enhancement parameters, we find reasonable agreement between theory and neutron form factor data. In addition, these zero parameter calculations yield predictions for the bulk susceptibility on an absolute scale which are in reasonable agreement with experiment in all treated cases except palladium

  6. Mobile based optical form evaluation system

    Directory of Open Access Journals (Sweden)

    Asım Sinan YÜKSEL

    2016-05-01

    Full Text Available Optical forms that contain multiple-choice answers are widely used both for electing students and evaluating student achievements in education systems in our country and worldwide. Optical forms are evaluated by employing optical mark recognition techniques through optical readers. High cost of these machines, limited access to them, long waiting time for evaluation results make the process hard for educationists working in cities or countries. In this study, a mobile application was developed for the educationists who own mobile phones or tablets for the purpose of evaluating students' answer sheets quickly and independent of location and optical readers. Optical form recognition, reading and evaluation processes are done on the image of student's answer sheet that is taken with the mobile phone or tablet of educationist. The Android based mobile application that we developed has a user-friendly interface, high success rate and is the first of our knowledge application that operates on mobile platforms in this field.

  7. Electromagnetic proton form factors: perspectives for PANDA

    Directory of Open Access Journals (Sweden)

    Tomasi-Gustafsson Egle

    2014-03-01

    Full Text Available The PANDA collaboration studies fundamental aspects of the strong interaction in the transition region between non-perturbative and perturbative QCD, investigating charmonium spectroscopy, hybrids and glueballs, hypernuclei, light and heavy meson production with antiproton beams. In this contribution we focus on leptonic final channels which give access to nucleon electromagnetic form factors. The expected precision on the electric and magnetic form factors of the proton in the time-like region and the radiative corrections to be applied to the data are discussed.

  8. Alternative solidified forms for nuclear wastes

    International Nuclear Information System (INIS)

    McElroy, J.L.; Ross, W.A.

    1976-01-01

    Radioactive wastes will occur in various parts of the nuclear fuel cycle. These wastes have been classified in this paper as high-level waste, intermediate and low-level waste, cladding hulls, and residues. Solidification methods for each type of waste are discussed in a multiple barrier context of primary waste form, applicable coatings or films, matrix encapsulation, canister, engineered structures, and geological storage. The four major primary forms which have been most highly developed are glass for HLW, cement for ILW, organics for LLW, and metals for hulls

  9. Leaching of nuclear power reactor waste forms

    International Nuclear Information System (INIS)

    Endo, L.S.; Villalobos, J.P.; Miyamoto, H.

    1987-01-01

    The leaching tests for immobilized power reactor wastes carried out at IPEN are described. These wastes forms consist mainly of spent resins and boric acid concentrates solidified in ordinary Portland cement. All tests were conducted according to the ISO and IAEA recommendations. Three years leaching results are reported. The cesium diffuvity coefficients determined out of these results are about 1 x 10 -8 cm 2 /s for boric acid waste form and 9 x 10 -9 cm 2 /s for ion-exchange resin waste. Strontium diffusivity coefficients found are about 3 x 10 -11 cm 2 /s and 9 x 10 -11 cm 2 /s respectively. (Author) [pt

  10. Trends and Visions in Metal Forming Tribology

    DEFF Research Database (Denmark)

    Bay, Niels

    2011-01-01

    Research and development in metal forming tribology is characterized by intensified focus on new tribo-systems such as new lubricants, tool materials and tool coatings in order to substitute environmentally hazardous lubricant systems. Other means to solve these problems include the development...... of structured work piece and tool surfaces to facilitate micro-hydro-dynamic lubrication. Increased knowledge on skin-pass rolling to establish structured sheet surfaces and new automatic polishing equipment to manufacture tailored tool surfaces are important means to improve tribo-conditions in severe forming...

  11. Forming of political opinion and decision

    International Nuclear Information System (INIS)

    Urban, K.

    1980-01-01

    Taking the SNR-300 reactor in Kalkar as an example, the process of forming of political opinion and decision is reconstructed in order to get a picture of typical consensus- and conflict patterns in the discussion of safety problems. On this basis, it should be possible to derive a freedom of action for the political and administrative managing of safety matters by means of feed back with social groups. As a crucial point the aspects concerning the steps of the forming of political opinion and decision are examined. (DG) [de

  12. Weak form factors of beauty baryons

    International Nuclear Information System (INIS)

    Ivanov, M.A.; Lyubovitskij, V.E.

    1992-01-01

    Full analysis of semileptonic decays of beauty baryons with J p =1/2 2 and J p =3/2 2 into charmed ones within the Quark Confinement Model is reported. Weak form factors and decay rates are calculated. Also the heavy quark limit m Q →∞ (Isgur-Wise symmetry) is examined. The weak heavy-baryon form factors in the Isgur-Wise limit and 1/m Q -corrections to them are computered. The Ademollo-Gatto theorem is spin-flavour symmetry of heavy quarks is checked. 33 refs.; 1 fig.; 9 tabs

  13. Trends and Visions in Metal Forming Tribology

    DEFF Research Database (Denmark)

    Bay, Niels

    2011-01-01

    of structured work piece and tool surfaces to facilitate micro-hydro-dynamic lubrication. Increased knowledge on skin-pass rolling to establish structured sheet surfaces and new automatic polishing equipment to manufacture tailored tool surfaces are important means to improve tribo-conditions in severe forming...... operations, which otherwise would require the use of environmentally hazardous lubricant systems. A methodology for prediction of limits of lubrication of new tribo-system for sheet forming production based on numerical modelling and off-line testing in dedicated simulative tribo-tests is proposed....

  14. Access 2007 forms and reports for dummies

    CERN Document Server

    Underdahl, Brian

    2013-01-01

    Do you have tons and tons of data on your computer but you're not quite sure how to make heads or tails of them-or even organize them? Are you using Access as spreadsheet rather than what it was really meant for? If you have trouble finding meaning in your data, then Access 2007 Forms & Reports for Dummies let you discover the wonders of this highly useful program. This no-nonsense guide gets right down to business by showing you the easy way to use this powerful tool. It gets you started with selective, targeted queries; forms that improve efficiency; and reports that communicate-while sparin

  15. Some continual integrals from gaussian forms

    International Nuclear Information System (INIS)

    Mazmanishvili, A.S.

    1985-01-01

    The result summary of continual integration of gaussian functional type is given. The summary contains 124 continual integrals which are the mathematical expectation of the corresponding gaussian form by the continuum of random trajectories of four types: real-valued Ornstein-Uhlenbeck process, Wiener process, complex-valued Ornstein-Uhlenbeck process and the stochastic harmonic one. The summary includes both the known continual integrals and the unpublished before integrals. Mathematical results of the continual integration carried in the work may be applied in the problem of the theory of stochastic process, approaching to the finding of mean from gaussian forms by measures generated by the pointed stochastic processes

  16. Rational homotopy theory and differential forms

    CERN Document Server

    Griffiths, Phillip

    2013-01-01

    This completely revised and corrected version of the well-known Florence notes circulated by the authors together with E. Friedlander examines basic topology, emphasizing homotopy theory. Included is a discussion of Postnikov towers and rational homotopy theory. This is then followed by an in-depth look at differential forms and de Tham's theorem on simplicial complexes. In addition, Sullivan's results on computing the rational homotopy type from forms is presented.  New to the Second Edition: *Fully-revised appendices including an expanded discussion of the Hirsch lemma*Presentation of a natu

  17. Processability analysis of candidate waste forms

    International Nuclear Information System (INIS)

    Gould, T.H. Jr.; Dunson, J.B. Jr.; Eisenberg, A.M.; Haight, H.G. Jr.; Mello, V.E.; Schuyler, R.L. III.

    1982-01-01

    A quantitative merit evaluation, or processability analysis, was performed to assess the relative difficulty of remote processing of Savannah River Plant high-level wastes for seven alternative waste form candidates. The reference borosilicate glass process was rated as the simplest, followed by FUETAP concrete, glass marbles in a lead matrix, high-silica glass, crystalline ceramics (SYNROC-D and tailored ceramics), and coated ceramic particles. Cost estimates for the borosilicate glass, high-silica glass, and ceramic waste form processing facilities are also reported

  18. Quadrature representation of finite element variational forms

    DEFF Research Database (Denmark)

    Ølgaard, Kristian Breum; Wells, Garth N.

    2012-01-01

    This chapter addresses the conventional run-time quadrature approach for the numerical integration of local element tensors associated with finite element variational forms, and in particular automated optimizations that can be performed to reduce the number of floating point operations. An alter......This chapter addresses the conventional run-time quadrature approach for the numerical integration of local element tensors associated with finite element variational forms, and in particular automated optimizations that can be performed to reduce the number of floating point operations...

  19. Hot forming of composite prepreg: Numerical analyses

    Science.gov (United States)

    Guzman-Maldonado, Eduardo; Hamila, Nahiène; Boisse, Philippe; El Azzouzi, Khalid; Tardif, Xavier; Moro, Tanguy; Chatel, Sylvain; Fideu, Paulin

    2017-10-01

    The work presented here is part of the "FORBANS" project about the Hot Drape Forming (HDF) process consisting of unidirectional prepregs laminates. To ensure a fine comprehension of this process a combination strategy between experiment and numerical analysis is adopted. This paper is focused on the numerical analysis using the finite element method (FEM) with a hyperelastic constitutive law. Each prepreg layer is modelled by shell elements. These elements consider the tension, in-plane shear and bending behaviour of the ply at different temperatures. The contact/friction during the forming process is taken into account using forward increment Lagrange multipliers.

  20. Simulation of nanotubular forms of matter

    International Nuclear Information System (INIS)

    Ivanovskii, Alexander L

    1999-01-01

    Data on the electronic and chemical structure of a new quasi-one-dimensional form of matter, viz., nanotubulenes, are generalised and systematised. Methods and approaches used in modern quantum chemistry for the simulation of the composition, structure, and properties of isolated tubulenes based on layered phases (graphite, boron nitride, boron carbide and boron carbonitride), nanotubular composites and nanotube crystals are described. The role of quantum theory in the development of the concepts of fundamental properties of substances in the nanotubular form and methods of their targeted modification is discussed. Prognostic potentials of theoretical models in solving material science problems are considered. The bibliography includes 197 references.

  1. Collective form generation through visual participatory representation

    DEFF Research Database (Denmark)

    Day, Dennis; Sharma, Nishant; Punekar, Ravi

    2012-01-01

    In order to inspire and inform designers with the users data from participatory research, it may be important to represent data in a visual format that is easily understandable to the designers. For a case study in vehicle design, the paper outlines visual representation of data and the use...... of the same in the collective form generation session with a set of designers (vehicle design students) where designers use sketching as a tool to discuss, conceptualise and negotiate concepts towards the final vehicle form. Further, this paper attempts to demonstrate how deep and tacit context sensitive...

  2. $K_{l3}$ transition form factors

    CERN Document Server

    Ji, C R; Ji, Chueng-Ryong; Maris, Pieter

    2001-01-01

    The rainbow truncation of the quark Dyson-Schwinger equation is combined with the ladder Bethe-Salpeter equation for the meson bound state amplitudes and the dressed quark-W vertex in a manifestly covariant calculation of the K_{l3} transition form factors and decay width in impulse approximation. With model gluon parameters previously fixed by the chiral condensate, the pion mass and decay constant, and the kaon mass, our results for the K_{l3} form factors and the kaon semileptonic decay width are in good agreement with the experimental data.

  3. New Visions on Form and Growth

    International Nuclear Information System (INIS)

    Howard, M

    2005-01-01

    It is now nearly 90 years since the publication of D'Arcy Thompson's book On Growth and Form, a classic work that attempted a unification of pattern-forming phenomena in systems ranging from inanimate to living matter. Thompson's book came early in the development of mathematical techniques in biology. His work has had enormous influence in succeeding decades and has helped inspire the rapid growth in the application of theoretical techniques to biological phenomena. Pelce's book New Visions on Form and Growth takes its inspiration and title directly from D'Arcy Thompson. Furthermore, Pelce attempts what could not be achieved in D'Arcy Thompson's time, namely the presentation of a quantitative analysis of pattern forming phenomena. However, it should be emphasised that the vast majority of this book is concerned with inanimate matter, with rather little discussion of biology. The book begins with a presentation of the basic physics, including surface tension, first-order phase transition kinetics and a brief outline of chemical kinetics. With the essential physics established, Pelce then investigates simple growth forms, before showing how these regular geometries are destabilized into more complex forms by instabilities. The problem of velocity selection of growing patterns is then extensively discussed, before the question of (secondary) instabilities of the more complex growth forms is analysed. A chapter on stochastic patterns is also included. For the most part, the book concentrates on a few intensively studied pattern forming systems in physics, particularly viscous fingering in Hele-Shaw cells, the growth of dendrites, electrodeposition, flames, and, in the chapter on stochastic patterns, diffusion-limited aggregation. Only in a rather brief final chapter is a more speculative link made with biological pattern formation and morphogenesis. In general, I found the book to be a useful reference work on the theory of pattern forming systems. However, the

  4. 75 FR 42828 - Proposed Collection; Comment Request for Form 13560

    Science.gov (United States)

    2010-07-22

    ... handling. This form serves as supporting documentation for any funds returned by an HPA and clarifies where... Form 13560, HCTC Health Plan Administrator (HPA) Return of Funds Form. DATES: Written comments should...) Return of Funds form. OMB Number: 1545-1891. Form Number: Form 13560. Abstract: Form 13560 is completed...

  5. Development of solid radionuclide waste forms in the United States

    International Nuclear Information System (INIS)

    Crandall, J.L.

    1979-01-01

    New ways of reworking the wastes require a new classification in terms of the final waste forms. This paper surveys the candidate forms: encapsulation binders, in-place solidification waste forms, glass and ceramic waste forms, mineral waste forms, matrix waste forms, gaseous waste forms (fixation), and canisters and engineered barriers. Participants in the US-high-level waste form development program are listed. Requirements and selection of waste forms are also discussed. 26 references

  6. The smallest form of life yet?

    Indian Academy of Sciences (India)

    tian meteorite. (The material that formed the meteorite solidified on Mars 4·5 billion years ago, was shot into space by another meteorite that hit Mars, voyaged in space for 16 million years, fell in Antarctica about 13,000 years ago and was discovered in 1984.) That claim attracted a great deal of controversy and scepticism.

  7. Iterative solvers in forming process simulations

    NARCIS (Netherlands)

    van den Boogaard, Antonius H.; Rietman, Bert; Huetink, Han

    1998-01-01

    The use of iterative solvers in implicit forming process simulations is studied. The time and memory requirements are compared with direct solvers and assessed in relation with the rest of the Newton-Raphson iteration process. It is shown that conjugate gradient{like solvers with a proper

  8. AGILITY AS A MODERN FORM OF RECREATION

    Directory of Open Access Journals (Sweden)

    Monika Niewiadomska

    2013-06-01

    Full Text Available Physical activity is one of the main factors to influence human health. The beneficial effects of physical exercise and various forms of active recreation can only be observed, however, after systematic application, which usually occurs when exercise is in line with one's interests and preferences. The increasing number of forms of recreation makes it possible to customize these to suit individual needs. One such recreational activity is agility , i.e. keeping pace with a dog through an obstacle course while leading the dog through the various obstacles in certain ways. The main purpose of the presenting work was to analyze agility’s impact as therapeutic effects on the people of all ages, including children. Currently, agility is developing as a sport and a form of recreation in Poland and over the world. Due to its versatility, agility is suitable for people of all ages. It is a spectator sport, enjoying growing interest among children, adolescents and adults. This form of physical recreation, next to the positive impact on the physical development, also has a considerable positive impact on the human psyche.

  9. Documentary in American Television: Form, Function, Method

    Science.gov (United States)

    Bleum, A. William

    The documentary movement in American television is explored. Analyzed are the forms and functions of television documentary and its heritage in other media (print, still photography, motion pictures, radio, theater). The major achievements in these media and in television, such as "See It Now,""Victory at Sea," and many news documentaries are…

  10. Graphic Forms in Network Television News.

    Science.gov (United States)

    Foote, Joe S.; Saunders, Ann C.

    1990-01-01

    Compares different forms of graphics (symbols, film, video and still photographs) used by CBS, NBC, and ABC in 1988. Finds an average of 25 graphics per evening news program. Finds that 78 percent of stories use some kind of visual, with ABC using more visuals than other two networks. Speculates on potential influence of graphics in agenda…

  11. Characterization of fracture loci in metal forming

    DEFF Research Database (Denmark)

    Martins, P.A.F.; Bay, Niels; Tekkaya, A.E.

    2014-01-01

    Fracture in metal forming can occur in three different modes: (i) tensile; (ii) in-plane shear; and (iii) out-of-plane shear (respectively the same as modes I, II and III of fracture mechanics). The circumstances under which each mode will occur are identified in terms of plastic flow and microst...

  12. On the generalized Lorenz canonical form

    Czech Academy of Sciences Publication Activity Database

    Čelikovský, Sergej; Guanrong, Ch.

    2005-01-01

    Roč. 26, č. 5 (2005), s. 1271-1276 ISSN 0960-0779 R&D Projects: GA ČR GA102/05/0011; GA MŠk 1P05LA262 Institutional research plan: CEZ:AV0Z10750506 Keywords : chaos * synchronization * canonical form Subject RIV: BC - Control Systems Theory Impact factor: 1.938, year: 2005

  13. Sensitive radioenzymatic assay for epinephrine forming enzymes

    Energy Technology Data Exchange (ETDEWEB)

    Ziegler, M.G.; Kennedy, B.; Elayan, H.

    1988-01-01

    Epinephrine (E) is formed in the adrenal medulla by phenylethanolamine-N-methyltransferase (PNMT), and in other tissues. Enzymes other than PNMT may be able to synthesize E, but this has been difficult to investigate because most assays do not have E as their final product. This assay produces /sup 3/H-E from norepinephrine (NE) and /sup 3/H-S-adenosylmethionine. The /sup 3/H-E is isolated on alumina, /sup 3/H-S-adenosylmethionine is precipitated and the /sup 3/H-E is suspended in diethylhexyl phosphoric acid in toluene for scintillation counting. The assay is sensitive and linear over a wide range. E was formed by most tissues tested. Brain and adrenal contained an enzyme specific for NE, but cardiac ventricle contained an enzyme that methylated both NE and dopamine. Denervated tissues in adrenal medullectomized rats contained very little NE, but still had E and E forming enzyme present. This assay detects a non-neuronal E forming enzyme with activity in vitro and in vivo.

  14. Open and Closed Form in Interactive Music

    DEFF Research Database (Denmark)

    Graugaard, Lars

    2005-01-01

    /machine performance environment of my composition 'GUITAR' for acoustic guitar and interactive computer. The performance environment functions as a perception-based multi-parameter space where the performer's score provides the means for exploring the space. The open-form notation emphazises the interactive...

  15. Advanced friction modeling in sheet metal forming

    NARCIS (Netherlands)

    Hol, J.; Cid Alfaro, M.V.; Meinders, Vincent T.; Huetink, Han

    2011-01-01

    The Coulomb friction model is frequently used for sheet metal forming simulations. This model incorporates a constant coefficient of friction and does not take the influence of important parameters such as contact pressure or deformation of the sheet material into account. This article presents a

  16. 32 CFR 94.5 - Forms required.

    Science.gov (United States)

    2010-07-01

    ... Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN... ADOPTED CHILDREN OF MILITARY AND CIVILIAN PERSONNEL ORDERED OVERSEAS § 94.5 Forms required. The following... handled on a priority basis so as to avoid prejudicing the early completion of the naturalization process...

  17. supplier, tax and bank information form

    International Development Research Centre (IDRC) Digital Library (Canada)

    Hakan Mustafa

    General Principles of our Privacy Policy. IDRC is committed to protect the privacy of its suppliers' information. IDRC gathers specific personal information that you supply voluntarily in written form or by e-mail. Any personal information created, held or collected by IDRC is protected under the Canadian federal Privacy Act.

  18. On totally reducible binary forms: I

    Indian Academy of Sciences (India)

    Springer Verlag Heidelberg #4 2048 1996 Dec 15 10:16:45

    on the properties of the automorphics of the form. We therefore reserve the treatment of item (i) for a second paper, especially as an exhaustive treatment of the structure of the automorphics occupies some space, is in itself an interesting study, and involves ideas that are somewhat alien to those used in the present work.

  19. Controllable forms of natural background radiation

    International Nuclear Information System (INIS)

    1988-03-01

    RENA is a research programm into the controllable forms of natural background radiation, which cover the activities originating from the naturally occurring radionuclides enhanced by human intervention. In the RENA-program emphasis lays upon the policy aspects of environmental-hygienic, economical and governmental character. (H.W.). 15 refs.; 2 tabs

  20. Simple parametrization of nucleon form factors

    International Nuclear Information System (INIS)

    Kelly, J.J.

    2004-01-01

    This Brief Report provides simple parametrizations of the nucleon electromagnetic form factors using functions of Q 2 that are consistent with dimensional scaling at high Q 2 . Good fits require only four parameters each for G Ep , G Mp , and G Mn and only two for G En

  1. Parametric form of QCD travelling waves

    OpenAIRE

    Peschanski, R.

    2005-01-01

    We derive parametric travelling-wave solutions of non-linear QCD equations. They describe the evolution towards saturation in the geometric scaling region. The method, based on an expansion in the inverse of the wave velocity, leads to a solvable hierarchy of differential equations. A universal parametric form of travelling waves emerges from the first two orders of the expansion.

  2. Mixed Waste Focus Area - Waste form initiative

    International Nuclear Information System (INIS)

    Nakaoka, R.; Waters, R.; Pohl, P.; Roach, J.

    1998-01-01

    The mission of the US Department of Energy's (DOE) Mixed Waste Focus Area (MWFA) is to provide acceptable technologies that enable implementation of mixed waste treatment systems which are developed in partnership with end-users, stakeholders, tribal governments, and regulators. To accomplish this mission, a technical baseline was established in 1996 and revised in 1997. The technical baseline forms the basis for determining which technology development activities will be supported by the MWFA. The primary attribute of the technical baseline is a set of prioritized technical deficiencies or roadblocks related to implementation of mixed waste treatment systems. The Waste Form Initiative (WFI) was established to address an identified technical deficiency related to waste form performance. The primary goal of the WFI was to ensure that the mixed low-level waste (MLLW) treatment technologies being developed, currently used, or planned for use by DOE would produce final waste forms that meet the waste acceptance criteria (WAC) of the existing and/or planned MLLW disposal facilities. The WFI was limited to an evaluation of the disposal requirements for the radioactive component of MLLW. Disposal requirements for the hazardous component are dictated by the Resource Conservation and Recovery Act (RCRA), and were not addressed. This paper summarizes the technical basis, strategy, and results of the activities performed as part of the WFI

  3. Forming Tests for Laser Welded Blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove; Rasmussen, Mads

    1998-01-01

    In this paper different means for testing the formability of new material combinations used as tailored blanks in the automotive industry are presented. The following forming techniques will be described and their benefits and drawbacks presented :Limiting Dome Height test (LDH)Limiting Drawing...

  4. TYPICAL FORMS OF LIVER PATHOLOGY IN CHILDREN

    Directory of Open Access Journals (Sweden)

    Peter F. Litvitskiy

    2018-01-01

    Full Text Available This lecture for the system of postgraduate medical education analyzes causes, types, key links of pathogenesis, and manifestations of the main typical forms of liver pathology — liver failure, hepatic coma, jaundice, cholemia, acholia, cholelithiasis, and their complications in children. To control the retention of the lecture material, case problems and multiple-choice tests are given.

  5. Friction in textile thermoplastic composites forming

    NARCIS (Netherlands)

    Akkerman, Remko; ten Thije, R.H.W.; Sachs, Ulrich; de Rooij, Matthias B.; Binetruy, C.; Boussu, F.

    2010-01-01

    A previously developed mesoscopic friction model for glass/PP textile composite laminates during forming is evaluated for glass and carbon/PPS laminates, at higher temperatures and lower viscosities than before. Experiments were performed for tool/ply and ply/ply configurations in a new friction

  6. 47 CFR 3.20 - Application form.

    Science.gov (United States)

    2010-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL AUTHORIZATION AND ADMINISTRATION OF ACCOUNTING..., “Application For Certification As An Accounting Authority” in order to be considered for certification as an accounting authority. No other application form may be used. No consideration will be given to applicants not...

  7. Raster Forming Block in Scanning Television Microscope

    OpenAIRE

    Vasylyuk, Volodymyr; Goy, Vitaliy; Shkliarskyi, Volodymyr

    2010-01-01

    The ways of construction of raster forming block, which provides television and little-frame modes, are considered. The analog and digital methods of formation of signals are analyzed. Ways of change of amplitude and displacement of signals of a raster are shown with the purpose of maintenance of scaling of the image of researched microobject.

  8. Guideline for Optical Character Recognition Forms.

    Science.gov (United States)

    National Bureau of Standards (DOC), Washington, DC.

    This publication provides materials relating to the design, preparation, acquisition, inspection, and application of Optical Character Recognition (OCR) forms in data entry systems. Since the materials are advisory and tutorial in nature, this publication has been issued as a guideline rather than as a standard in the Federal Information…

  9. Yang-Mills- SU(3) via FORM

    Energy Technology Data Exchange (ETDEWEB)

    Costa Jorge, Patricia M. da; Peres, Patricia Duarte [Universidade Catolica de Petropolis, RJ (Brazil). Dept. de Ciencia da Computacao; Boldo, J.L

    1997-06-01

    This work uses FORM software aspects for obtaining a series of formal results in the non-Abelian gauge theory, with SU(3) group. The work also studies field transformation, Lagrangian density invariance, field equations, energy distribution and the theory reparametrization in terms of fields associated to particles which are possible to be detected in accelerators

  10. Statistical prediction of parametric roll using FORM

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Choi, Ju-hyuck; Nielsen, Ulrik Dam

    2017-01-01

    Previous research has shown that the First Order Reliability Method (FORM) can be an efficient method for estimation of outcrossing rates and extreme value statistics for stationary stochastic processes. This is so also for bifurcation type of processes like parametric roll of ships. The present...

  11. Embryo forming cells in carrot suspension cultures

    NARCIS (Netherlands)

    Toonen, M.A.J.

    1997-01-01


    Somatic cells of many plant species can be cultured in vitro and induced to form embryos that are able to develop into mature plants. This process, termed somatic embryogenesis, was originally described in carrot (Daucus carota L.). Somatic embryos develop through the same characteristic

  12. Pædagogisk teori & arkitektonisk form

    DEFF Research Database (Denmark)

    Berg Nielsen, Kristian

    2000-01-01

    "Om Hertzbergers skoler kan det sammenfattende siges, at de både er i overensstemmelse med dette overordnede formål og med de intentioner, som ligger i Montessori-tænkningen. I forhold til dette pædagogiske program er arkitektens rolle den samme som ved andre typer af byggerier: making space...

  13. Nucleon axial form factor from lattice QCD

    International Nuclear Information System (INIS)

    Liu, K.F.; Dong, S.J.; Draper, T.; Wu, J.M.; Wilcox, W.

    1994-01-01

    Results for the isovector axial form factors of the proton from a lattice QCD calculation are presented for both the point-split and local currents. They are obtained on a quenched 16 3 x24 lattice at β=6.0 with Wilson fermions for a range of quark masses from strange to twice the charm mass. For each quark mass, we find that the axial form factor falls off slower than the corresponding proton electric form factor. Results extrapolated to the chiral limit show that the q 2 dependence of the axial form factor agrees quite well with experiment. The axial vector coupling constant g A calculated for the point-split and local currents is 1.20±0.11 and 1.18±0.11. The central values are 4% and 6% smaller than the experimental value of 1.254, respectively. We also consider the large ma correction and renormalization for the axial vector current of heavy quarks

  14. Forms of Spanking and Children's Externalizing Behaviors

    Science.gov (United States)

    Lansford, Jennifer E.; Wager, Laura B.; Bates, John E.; Pettit, Gregory S.; Dodge, Kenneth A.

    2012-01-01

    Research suggests that corporal punishment is related to higher levels of child externalizing behavior, but there has been controversy regarding whether infrequent, mild spanking predicts child externalizing or whether more severe and frequent forms of corporal punishment account for the link. Mothers rated the frequency with which they spanked…

  15. Forms and Issues in Experiential Learning

    Science.gov (United States)

    Moore, David Thornton

    2010-01-01

    Programs falling under the general rubric of "experiential education" take a number of forms, varying on several dimensions; what is offered here is a schematic overview. In general, they all involve students in activities that look rather different from more traditional classroom-based methods: (1) the formal lecture and discussion; (2) the…

  16. THE LIABILITY FORMS OF THE MEDICAL PERSONNEL.

    Science.gov (United States)

    Bărcan, Cristian

    2015-01-01

    Current legislation, namely Law no. 95/2006 on healthcare reform in the medical malpractice domain stipulates that medical staff can be held accountable in the following forms: disciplinary liability, administrative liability, civil liability and criminal liability. Each form of legal liability presents its features, aspects that are found mainly in the procedural rules. However, the differences between the various legal forms of liability are not met only in the procedural rules but also in their effects and consequences. It is necessary to know what the procedure for disciplinary responsibility, administrative liability, civil liability, or criminal liability is. In addition to the differentiation determined by the consequences that may arise from the different forms of legal liability, it is important to know the competent authorities to investigate a case further and the solutions which various public institutions can take regarding the medical staff. Depending on the type of legal liability, authorities have a specialized authority. If the Disciplinary Committee is encountered at the College of Physicians, it may not intervene in cases before the monitoring and competence for malpractice cases Committee. The latter two committees cannot intervene directly in the legal assessment of civil or criminal cases, as no criminal investigation authorities cannot intervene in strictly civilian cases. Therefore, the importance of knowing the competent institutions is imperative.

  17. Flange Curling in Cold Formed Profiles

    DEFF Research Database (Denmark)

    Jönsson, Jeppe; Ramonas, Gediminas

    2012-01-01

    The non-linear flange curling phenomenon in cold formed profiles is the tendency of slender flanges to deform towards the neutral axis for increasing flexural curvature. Based on Braziers work, Winter proposed a simple engineering formula for determination of the local flange deformation towards ...

  18. 20 CFR 703.2 - Forms.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Forms. 703.2 Section 703.2 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT OF LABOR LONGSHOREMEN'S AND HARBOR WORKERS... OWCP district offices and on the Internet at http://www.dol.gov/esa/owcp/dlhwc/lsforms.htm. ...

  19. Normal form for mirror machine Hamiltonians

    International Nuclear Information System (INIS)

    Dragt, A.J.; Finn, J.M.

    1979-01-01

    A systematic algorithm is developed for performing canonical transformations on Hamiltonians which govern particle motion in magnetic mirror machines. These transformations are performed in such a way that the new Hamiltonian has a particularly simple normal form. From this form it is possible to compute analytic expressions for gyro and bounce frequencies. In addition, it is possible to obtain arbitrarily high order terms in the adiabatic magnetic moment expansion. The algorithm makes use of Lie series, is an extension of Birkhoff's normal form method, and has been explicitly implemented by a digital computer programmed to perform the required algebraic manipulations. Application is made to particle motion in a magnetic dipole field and to a simple mirror system. Bounce frequencies and locations of periodic orbits are obtained and compared with numerical computations. Both mirror systems are shown to be insoluble, i.e., trajectories are not confined to analytic hypersurfaces, there is no analytic third integral of motion, and the adiabatic magnetic moment expansion is divergent. It is expected also that the normal form procedure will prove useful in the study of island structure and separatrices associated with periodic orbits, and should facilitate studies of breakdown of adiabaticity and the onset of ''stochastic'' behavior

  20. Germany forms alliance for terascale physics

    CERN Multimedia

    Feder, Toni

    2007-01-01

    "Germany's high-energy particle physicists have formed a network to increase their international visibility and competitiveness as their field gears up for the start next ear of the Large Hadron Collide (LHC) at CERN and, eventually, the International Linear Collider." (1 page)

  1. Nylon screws make inexpensive coil forms

    Science.gov (United States)

    Aucoin, G.; Rosenthal, C.

    1978-01-01

    Standard nylon screws act as coil form copper wire laid down in spiral thread. Completed coil may be bonded to printed-circuit board. However, it is impossible to tune coil by adjusting spacing between windings, technique sometimes used with air-core coils.

  2. Chiral analysis of baryon form factors

    Energy Technology Data Exchange (ETDEWEB)

    Gail, T.A.

    2007-11-08

    This work presents an extensive theoretical investigation of the structure of the nucleon within the standard model of elementary particle physics. In particular, the long range contributions to a number of various form factors parametrizing the interactions of the nucleon with an electromagnetic probe are calculated. The theoretical framework for those calculations is chiral perturbation theory, the exact low energy limit of Quantum Chromo Dynamics, which describes such long range contributions in terms of a pion-cloud. In this theory, a nonrelativistic leading one loop order calculation of the form factors parametrizing the vector transition of a nucleon to its lowest lying resonance, the {delta}, a covariant calculation of the isovector and isoscalar vector form factors of the nucleon at next to leading one loop order and a covariant calculation of the isoscalar and isovector generalized vector form factors of the nucleon at leading one loop order are performed. In order to perform consistent loop calculations in the covariant formulation of chiral perturbation theory an appropriate renormalization scheme is defined in this work. All theoretical predictions are compared to phenomenology and results from lattice QCD simulations. These comparisons allow for a determination of the low energy constants of the theory. Furthermore, the possibility of chiral extrapolation, i.e. the extrapolation of lattice data from simulations at large pion masses down to the small physical pion mass is studied in detail. Statistical as well as systematic uncertainties are estimated for all results throughout this work. (orig.)

  3. Lowland river systems - processes, form and function

    DEFF Research Database (Denmark)

    Pedersen, M. L.; Kronvang, B.; Sand-Jensen, K.

    2006-01-01

    to answer two fundamental questions: How has anthropogenic disturbance of rivers changed the fundamental form and physical processes in river valleys? Can we use our understanding of fl uvial patterns to restore the dynamic nature of channelised rivers and drained fl oodplains in river valleys?...

  4. Ordered biological nanostructures formed from chaperonin polypeptides

    Science.gov (United States)

    Trent, Jonathan D. (Inventor); McMillan, R. Andrew (Inventor); Kagawa, Hiromi (Inventor); Paavola, Chad D. (Inventor)

    2010-01-01

    The following application relates to nanotemplates, nanostructures, nanoarrays and nanodevices formed from wild-type and mutated chaperonin polypeptides, methods of producing such compositions, methods of using such compositions and particular chaperonin polypeptides that can be utilized in producing such compositions.

  5. Focus on Form in Live Chats

    Science.gov (United States)

    Chen, Wen-Chun; Eslami, Zohreh

    2013-01-01

    This study investigated the effectiveness of incidental focus on form in promoting second language development in text-based live chats. Sixteen college-level Taiwanese English language learners were partnered with American college students to complete two communicative tasks via synchronous chats on Instant Messenger. Language-related episodes…

  6. The characteristics of novel dosage forms

    Directory of Open Access Journals (Sweden)

    Milić-Aškrabić Jela

    2003-01-01

    Full Text Available The objective of pharmaceutical-technological development is to find a procedure of transforming an active substance (a drug into a drug dosage form which is not only acceptable for application, but also enables the active substance to be released following administration, pursuant to therapy objectives. The aim is that the concentration of the active substance in the action location rapidly reaches a therapeutic level and maintains an approximately constant level in the course of a particular time, according to the established therapeutic goal. The primary objective is to present the active ingredient (drug in the form and concentration/quantity that enables the corresponding therapeutic response, i.e. to control the site and rate of medicinal substance release from the drug, as well as the rate at which it reaches the membranes and surfaces to which it is absorbed, while applying a common method of administration. The procedures used to achieve this goal are becoming highly complex and demanding and are aiming at sophisticated drug delivery systems and functional packaging material. Development from the existing drug molecule, through the conventional drug dosage form, to a new system of drug "delivery" (novel delivery system, can improve the drug (active substance characteristics significantly in view of compliance (acceptability by the patient, safety and efficiency. The paper presents an overview of the most important examples of pharmaceutical forms with controlled release and advanced drug "carriers".

  7. Amorphous calcium carbonate particles form coral skeletons

    Science.gov (United States)

    Mass, Tali; Giuffre, Anthony J.; Sun, Chang-Yu; Stifler, Cayla A.; Frazier, Matthew J.; Neder, Maayan; Tamura, Nobumichi; Stan, Camelia V.; Marcus, Matthew A.; Gilbert, Pupa U. P. A.

    2017-09-01

    Do corals form their skeletons by precipitation from solution or by attachment of amorphous precursor particles as observed in other minerals and biominerals? The classical model assumes precipitation in contrast with observed “vital effects,” that is, deviations from elemental and isotopic compositions at thermodynamic equilibrium. Here, we show direct spectromicroscopy evidence in Stylophora pistillata corals that two amorphous precursors exist, one hydrated and one anhydrous amorphous calcium carbonate (ACC); that these are formed in the tissue as 400-nm particles; and that they attach to the surface of coral skeletons, remain amorphous for hours, and finally, crystallize into aragonite (CaCO3). We show in both coral and synthetic aragonite spherulites that crystal growth by attachment of ACC particles is more than 100 times faster than ion-by-ion growth from solution. Fast growth provides a distinct physiological advantage to corals in the rigors of the reef, a crowded and fiercely competitive ecosystem. Corals are affected by warming-induced bleaching and postmortem dissolution, but the finding here that ACC particles are formed inside tissue may make coral skeleton formation less susceptible to ocean acidification than previously assumed. If this is how other corals form their skeletons, perhaps this is how a few corals survived past CO2 increases, such as the Paleocene-Eocene Thermal Maximum that occurred 56 Mya.

  8. MNC Organizational Form and Subsidiary Motivation Problems

    DEFF Research Database (Denmark)

    Foss, Kirsten; Foss, Nicolai Juul; Nell, Phillip Christopher

    -creation). This may happen even if such intervention is benevolent in its intentions. We argue that the movement away from more traditional hierarchical forms of the MNC and towards network MNCs placed in more dynamic environments gives rise to more occasions for potentially harmful intervention by HQ. Network MNCs...

  9. A new lubricant carrier for metal forming

    DEFF Research Database (Denmark)

    Arentoft, Mogens; Bay, Niels; Tang, Peter Torben

    2009-01-01

    A lubricant carrier for metal forming processes is developed. Surfaces with pores of micrometer size for entrapping lubricant are generated by electrochemical deposition of an alloy, consisting of two immiscible metals, of which one metal subsequently is etched away leaving 5 mu m layers with a s...... extrusion at high reduction and excessive stroke comparing with conventionally lubrication using phosphate coating and soap....

  10. <3> OMEGA pulse-forming network

    CERN Multimedia

    1974-01-01

    Adjustement of the 3 W pulse-forming network of the SPS beam dumping system. When charged at 60 kV, this PFN gives 10 kA, 25 ms current pulses, with oscillations, superimposed on the pulse flat top, of an amplitude of +/- 1 Ka.

  11. Meaning and Forms of Political Extremism

    Directory of Open Access Journals (Sweden)

    Uwe Backes

    2007-12-01

    Full Text Available The article seeks to contribute to the conceptualisation of political extremism and to lay a foundation for further theoretical studies which are explanatory in nature. A sketch of the history of the concepts follows a discussion of structural characteristics and then a typological examination of forms of extremism, particularly those of the 20th and 21st century.

  12. ArcForm - A multimodal notation

    DEFF Research Database (Denmark)

    Allsopp, Benjamin Brink

    ArcForm (AF) is a visual notation based on a new graph-like network structure. It supports a unique approach to labeling arcs and nodes to allow diverse and grammatically normal English (or other natural language) sentences to be embedded in the network (Allsopp, 2013). In doing this AF combines ...

  13. On combinatorial formula for the prime form

    Czech Academy of Sciences Publication Activity Database

    Zuevsky, Alexander

    2014-01-01

    Roč. 9, č. 17 (2014), s. 107-110 ISSN 1822-511X Institutional support: RVO:67985840 Keywords : prime forms * vertex algebras * correlation function s Subject RIV: BA - General Mathematics http://siauliaims.su.lt/index.php?option=com_content&view=article&id=379&Itemid=7

  14. Twisted holomorphic forms on generalized flag varieties

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    As a corollary of Theorem 1 and Proposition 2, we get the following vanishing theorem: ..... easily what the maximum positive value is which can occur in (µ, α∨ ... Twisted holomorphic forms on generalized flag varieties. 129. The following observation will be useful in writing down the conditions stated in the proposition.

  15. Design Interventions as a Form of Inquiry

    DEFF Research Database (Denmark)

    Halse, Joachim; Boffi, Laura

    2014-01-01

    Things could be different. This paper is about research methods that are explicitly oriented towards qualitative empirical exploration of the open-endedness of the world. In short, we propose that design interventions can be seen as a form of inquiry that is particularly relevant for investigating...

  16. Spray Forming Aluminum - Final Report (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    D. D. Leon

    1999-07-08

    The U.S. Department of Energy - Office of Industrial Technology (DOE) has an objective to increase energy efficient and enhance competitiveness of American metals industries. To support this objective, ALCOA Inc. entered into a cooperative program to develop spray forming technology for aluminum. This Phase II of the DOE Spray Forming Program would translate bench scale spray forming technology into a cost effective world class process for commercialization. Developments under DOE Cooperative Agreement No. DE-FC07-94ID13238 occurred during two time periods due to budgetary constraints; April 1994 through September 1996 and October 1997 and December 1998. During these periods, ALCOA Inc developed a linear spray forming nozzle and specific support processes capable of scale-up for commercial production of aluminum sheet alloy products. Emphasis was given to alloys 3003 and 6111, both being commercially significant alloys used in the automotive industry. The report reviews research performed in the following areas: Nozzel Development, Fabrication, Deposition, Metal Characterization, Computer Simulation and Economics. With the formation of a Holding Company, all intellectual property developed in Phases I and II of the Project have been documented under separate cover for licensing to domestic producers.

  17. High precision laser forming for micro actuation

    NARCIS (Netherlands)

    Folkersma, Ger; Römer, Gerardus Richardus, Bernardus, Engelina; Brouwer, Dannis Michel; Huis in 't Veld, Bert; Nakata, Yoshiki; Xu, Xianfan; Roth, Stephan; Neuenschwander, Beat

    2014-01-01

    For assembly of micro-devices, such as photonic devices, the precision alignment of components is often critical for their performance. Laser forming, also known as laser-adjusting, can be used to create an integrated microactuator to align the components with sub-micron precision after bonding. In

  18. Forming foam structures with carbon foam substrates

    Science.gov (United States)

    Landingham, Richard L.; Satcher, Jr., Joe H.; Coronado, Paul R.; Baumann, Theodore F.

    2012-11-06

    The invention provides foams of desired cell sizes formed from metal or ceramic materials that coat the surfaces of carbon foams which are subsequently removed. For example, metal is located over a sol-gel foam monolith. The metal is melted to produce a metal/sol-gel composition. The sol-gel foam monolith is removed, leaving a metal foam.

  19. The Strategic Form of Quantum Prisoners' Dilemma

    Science.gov (United States)

    Ahmad, Nawaz

    2013-05-01

    In a normal form, prisoners' dilemma (PD) is represented by a payoff matrix showing players' strategies and payoffs. To obtain the distinguishing trait and strategic form of PD, certain constraints are imposed on the elements of its payoff matrix. We quantize PD by a generalized quantization scheme to analyze its strategic behavior in the quantum domain. The game starts with a general entangled state of the form and the measurement for payoffs is performed in entangled and product bases. We show that for both measurements, there exist respective cutoff values of entanglement of the initial quantum state up to which the strategic form of the game remains intact. Beyond these cutoffs the quantized PD behaves like the chicken game (CG) up to another cutoff value. For the measurement in the entangled basis the dilemma is resolved for sinξ > 1/7 with Q Q as a Nash Equilibrium (NE). However, the quantized game behaves like PD when sinξ > 1/3; whereas in the range 1/7 < sinξ < 1/3 it behaves like CG with Q Q as an NE. For the measurement in the product basis the quantized PD behaves like classical PD for with D D as an NE. In region , the quantized PD behaves like classical CG with C D and D C as NEs.

  20. Failure by fracture in bulk metal forming

    DEFF Research Database (Denmark)

    Silva, C.M.A.; Alves, Luis M.; Nielsen, Chris Valentin

    2015-01-01

    This paper revisits formability in bulk metal forming in the light of fundamental concepts of plasticity,ductile damage and crack opening modes. It proposes a new test to appraise the accuracy, reliability and validity of fracture loci associated with crack opening by tension and out-of-plane shear...

  1. 7 CFR 4290.100 - Business form.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Business form. 4290.100 Section 4290.100 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL BUSINESS INVESTMENT COMPANY (âRBICâ) PROGRAM...

  2. 14 CFR 151.67 - Forms.

    Science.gov (United States)

    2010-01-01

    ... undertaking and carrying out of the project, determination of allowability of costs, payment of the United... 5100-3: Contains a statement requesting Federal-aid in carrying out a project under the Federal Airport... proposed work, and its estimated cost. (2) Project application, Form FAA-1624: A formal application for...

  3. Alternative High-Performance Ceramic Waste Forms

    Energy Technology Data Exchange (ETDEWEB)

    Sundaram, S. K. [Alfred Univ., NY (United States)

    2017-02-01

    This final report (M5NU-12-NY-AU # 0202-0410) summarizes the results of the project titled “Alternative High-Performance Ceramic Waste Forms,” funded in FY12 by the Nuclear Energy University Program (NEUP Project # 12-3809) being led by Alfred University in collaboration with Savannah River National Laboratory (SRNL). The overall focus of the project is to advance fundamental understanding of crystalline ceramic waste forms and to demonstrate their viability as alternative waste forms to borosilicate glasses. We processed single- and multiphase hollandite waste forms based on simulated waste streams compositions provided by SRNL based on the advanced fuel cycle initiative (AFCI) aqueous separation process developed in the Fuel Cycle Research and Development (FCR&D). For multiphase simulated waste forms, oxide and carbonate precursors were mixed together via ball milling with deionized water using zirconia media in a polyethylene jar for 2 h. The slurry was dried overnight and then separated from the media. The blended powders were then subjected to melting or spark plasma sintering (SPS) processes. Microstructural evolution and phase assemblages of these samples were studied using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion analysis of x-rays (EDAX), wavelength dispersive spectrometry (WDS), transmission electron spectroscopy (TEM), selective area x-ray diffraction (SAXD), and electron backscatter diffraction (EBSD). These results showed that the processing methods have significant effect on the microstructure and thus the performance of these waste forms. The Ce substitution into zirconolite and pyrochlore materials was investigated using a combination of experimental (in situ XRD and x-ray absorption near edge structure (XANES)) and modeling techniques to study these single phases independently. In zirconolite materials, a transition from the 2M to the 4M polymorph was observed with increasing Ce content. The resulting

  4. Baryon electromagnetic form factors at BESIII

    Directory of Open Access Journals (Sweden)

    Dbeyssi Alaa

    2017-01-01

    Full Text Available Electromagnetic form factors are fundamental quantities which parameterize the electric and magnetic structure of hadrons. This contribution reports on the measurements of baryon electromagnetic form factors at the BESIII experiment in Beijing. The Beijing e+e− collider BEPCII is a double-ring symmetric collider running at √s between 2.0 and 4.6 GeV. Baryon electromagnetic form factors can be measured at BESIII in direct e+e−-annihilation and in initial state radiation processes. Based on the data collected by the BESIII detector at 12 center of mass energies between 2.23 and 3.67 GeV, the e+e− → p̄p cross section and the time-like proton form factor is measured. Preliminary results from the analysis of the initial state radiation process e+e− → p̄pγ using a data set of 7.408 fb−1 collected at center-of-mass energies between 3.773 and 4.6 GeV, are also presented. The cross section for e+e−→Λ¯Λ${e^ + }{e^ - } \\to \\bar \\Lambda \\Lambda $ is measured based on 40.5 pb−1 data collected at 4 energy points from the threshold up to 3.08 GeV. Preliminary results on the total cross section and the Λ effective form factor are shown. Ongoing analysis based on the high luminosity energy scan from 2015 and from radiative return at different √s are also described.

  5. Prescribing Errors Involving Medication Dosage Forms

    Science.gov (United States)

    Lesar, Timothy S

    2002-01-01

    CONTEXT Prescribing errors involving medication dose formulations have been reported to occur frequently in hospitals. No systematic evaluations of the characteristics of errors related to medication dosage formulation have been performed. OBJECTIVE To quantify the characteristics, frequency, and potential adverse patient effects of prescribing errors involving medication dosage forms . DESIGN Evaluation of all detected medication prescribing errors involving or related to medication dosage forms in a 631-bed tertiary care teaching hospital. MAIN OUTCOME MEASURES Type, frequency, and potential for adverse effects of prescribing errors involving or related to medication dosage forms. RESULTS A total of 1,115 clinically significant prescribing errors involving medication dosage forms were detected during the 60-month study period. The annual number of detected errors increased throughout the study period. Detailed analysis of the 402 errors detected during the last 16 months of the study demonstrated the most common errors to be: failure to specify controlled release formulation (total of 280 cases; 69.7%) both when prescribing using the brand name (148 cases; 36.8%) and when prescribing using the generic name (132 cases; 32.8%); and prescribing controlled delivery formulations to be administered per tube (48 cases; 11.9%). The potential for adverse patient outcome was rated as potentially “fatal or severe” in 3 cases (0.7%), and “serious” in 49 cases (12.2%). Errors most commonly involved cardiovascular agents (208 cases; 51.7%). CONCLUSIONS Hospitalized patients are at risk for adverse outcomes due to prescribing errors related to inappropriate use of medication dosage forms. This information should be considered in the development of strategies to prevent adverse patient outcomes resulting from such errors. PMID:12213138

  6. Directory of energy data collection forms: Forms in use as of October 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-15

    This 18th edition directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry; selected public use forms currently used as basic energy information gathering tools by DOE are covered. For each form, an abstract is included that describes the form`s uses, its respondents, and the data collected. Also shown are frequently requested items: energy sources and functions covered by the form, general categories of respondents, collection frequency, public laws and regulations, reporting requirement, name and phone number of the data collection manager, and the publications resulting from the data collection. Indexes, arranged according to energy source/function, publications, respondent categories, former EIA form number designations, and collection authorities, are provided.

  7. Measuring the Thermophysical and Structural Properties of Glass-Forming and Quasicrystal-Forming Liquids

    Science.gov (United States)

    Hyers, Robert W.; Bradshaw, Richard C.; Rogers, Jan R.; Gangopadhyay, Anup K.; Kelton, Ken F.

    2006-01-01

    The thermophysical properties of glass-forming and quasicrystal-forming alloys show many interesting features in the undercooled liquid range. Some of the features in the thermophysical property curves are expected to reflect changes in the structure and coordination of the liquid. These measurements require containerless processing such as electrostatic levitation to access the undercooled liquid regime. An overview of the state of the art in measuring the thermophysical properties and structure of undercooled liquid glass-forming and quasicrystal-forming alloys will be presented, along with the status of current measurements.

  8. Biomimicry of Palm Tree Leaves Form and Pattern on Building Form

    Directory of Open Access Journals (Sweden)

    Agus Salim N.A.

    2014-01-01

    Full Text Available This article is a study on biomimicry of palm tree towards a building form. It is to find a suitable form and pattern that can be applied to building shell to ease building maintenance operation beside to enhance the aesthetic value of a building architecture. The research has been carried out by observation and modeling on some various species of palm tree’s patterns and forms. The result expectation can be found at the end of this research by producing the best pattern of palm tree that can be adapted to building envelop as the whole form of a building.

  9. Foucault's Notion of Forms of Problematization

    DEFF Research Database (Denmark)

    Frederiksen, Kirsten; Lomborg, Kirsten; Beedholm, Kirsten

    2015-01-01

    This study takes its point of departure in an oft-voiced critique that the French philosopher Michel Foucault gives discourse priority over practice, thereby being deterministic and leaving little space for the individual to act as an agent. Based on an interpretation of the latter part of Foucault......'s oeuvre, we argue against this critique and provide a methodological discussion of the perception that Foucault's method constitutes, primarily, discourse analysis. We argue that it is possible to overcome this critique of Foucault's work by the application of methodological tools adapted from Foucault......'s later writings and his diagnosis of his own work as studies of forms of problematization. To shed light on the possibilities that this approach offers to the researcher, we present a reading of aspects of Foucault's work, with a focus on his notion of forms of problematization. Furthermore, we elaborate...

  10. "Domestic Violence" and Different Forms of Conciliation

    Directory of Open Access Journals (Sweden)

    Guita Grin Debert

    2008-01-01

    Full Text Available Alternative conflict resolution based on conciliation have been identified as a possible response to problems of access to courts deriving from the numbers, costs and length of proceedings in the Brazilian's judicial system. This paper focuses on these alternative forms of justice, regarding domestic violence. Using ethnographic studies of Women's Police Stations and at Small Claim Courts, we argue that conciliation can be very different in these two institutions of the judicial system. The contrasts between moral values and the symbols used in different forms by these two institutions offer elements that can further be our understanding of the context in which Maria da Penha Law was created on August 17th of 2006. With the promulgation of this law, cases of domestic violence against women were excluded from Small Claim Courts in Brazil.

  11. Form factors of heavy mesons in QCD

    International Nuclear Information System (INIS)

    Shifman, M.A.; Vysotsky, M.I.

    1980-01-01

    Logarithmic corrections to form factors of mesons built from heavy quarks are dirived in the framework of quantum chromodynamics. The reactions e + e - → etasub(c)γ and H → J/PSIγ are considered as an example. A novel feature as compared to the well studied problem of the pion form factor is the existence of the transformations between the quark-antiquark state c anti c and the gluonic one. O(αsub(s)) corrections are calculated exactly. An infinite series of the leading logarithmic terms is summed up with the help of the operator technique. Apart from already known results for quark operators some new results referring to gluon operators and their mixing with the quark ones are used. Two alternative derivations of the multiplicatively renormalizable operators are given. The first one reduces to a direct computation of the mixing matrix and its diagonalization, the second derivation is based on conformal symmetry considerations

  12. Critical Wave Forms in Dry Type Transformers

    DEFF Research Database (Denmark)

    Pedersen, Kenneth; Holbøll, Joachim; Henriksen, Mogens

    2005-01-01

    This paper concerns critical wave forms in dry type transformers under transient voltage application. A very general approach has been applied, meaning that many of the results will be applicable to various types of power transformers. The results can be very useful if they are combined...... with knowledge of the ageing effects of the insulation. Especially fast transients are likely to become a major issue due to fast breakers and power electronics. In order to perform relevant research in transformer insulation with respect to this subject, fundamental knowledge about the transmission...... and distortion of incoming transients is required. Thus, in this paper it is illustrated how the resulting internal wave forms are affected by different transformer characteristics....

  13. Open and Closed Form in Interactive Music

    DEFF Research Database (Denmark)

    Graugaard, Lars

    2005-01-01

    Performing music includes substantial listening skills on part of the performer. Performing with an interactive computer requires the performer to interact with the computer and intuitively and consciously include this information in the responsiveness of his playing. The interaction can be expan......Performing music includes substantial listening skills on part of the performer. Performing with an interactive computer requires the performer to interact with the computer and intuitively and consciously include this information in the responsiveness of his playing. The interaction can...... be expanded to include the performer's high-level decisions typical of open-form notation. These decisions can be used for defining and re-defining the computer's role in further development of the piece. In this paper I describe how such an open-form notation is used in the interactive man...

  14. Chemical compatibility of DWPF canistered waste forms

    International Nuclear Information System (INIS)

    Harbour, J.R.

    1993-01-01

    The Waste Acceptance Preliminary Specifications (WAPS) require that the contents of the canistered waste form are compatible with one another and the stainless steel canister. The canistered waste form is a closed system comprised of a stainless steel vessel containing waste glass, air, and condensate. This system will experience a radiation field and an elevated temperature due to radionuclide decay. This report discusses possible chemical reactions, radiation interactions, and corrosive reactions within this system both under normal storage conditions and after exposure to temperatures up to the normal glass transition temperature, which for DWPF waste glass will be between 440 and 460 degrees C. Specific conclusions regarding reactions and corrosion are provided. This document is based on the assumption that the period of interim storage prior to packaging at the federal repository may be as long as 50 years

  15. IS 37 FORM ON EDH WEB

    CERN Multimedia

    2000-01-01

    To Staff Members in charge of the execution of works The “Issuers” are reminded to fill in - if necessary - the form attached to Safety Instruction 37 when disabling all or part of the system generating a level 3 alarm. Reminder: The request must be completed by the issuer and authorised by the TSO/GLIMOS responsible for the building or area. After completion of the works, the TSO/GLIMOS make sure that the system is recommissioned. Please note that the computerized version of this form is available on the web. The icon can be found on the EDH Web Desktop Homepage. The paper version is still in use. If you have any questions, please contact A. Chouvelon/TIS, tel. 74229.

  16. Determining leach rates of monolithic waste forms

    International Nuclear Information System (INIS)

    Gilliam, T.M.; Dole, L.R.

    1986-01-01

    The ANS 16.1 Leach Procedure provides a conservative means of predicting long-term release from monolithic waste forms, offering a simple and relatively quick means of determining effective solid diffusion coefficients. As presented here, these coefficients can be used in a simple model to predict maximum release rates or be used in more complex site-specific models to predict actual site performance. For waste forms that pass the structural integrity test, this model also allows the prediction of EP-Tox leachate concentrations from these coefficients. Thus, the results of the ANS 16.1 Leach Procedure provide a powerful tool that can be used to predict the waste concentration limits in order to comply with the EP-Toxicity criteria for characteristically nonhazardous waste. 12 refs., 3 figs

  17. Hemophagocytic syndrome: primary forms and predisposing conditions.

    Science.gov (United States)

    Sepulveda, Fernando E; de Saint Basile, Geneviève

    2017-12-01

    Hemophagocytic lymphohistiocytosis (HLH, also referred to a hemophagocytic syndrome) is a life-threatening condition in which uncontrolled activation of lymphocytes and macrophages, and thus the secretion of large amounts of inflammatory cytokines, leads to a severe hyperinflammatory state. Over the last few decades, researchers have characterized primary forms of HLH caused by genetic defects that impair lymphocytes' cytotoxic machinery. Other genetic causes of HLH not related to impaired cytotoxicity have also recently been identified. Furthermore, the so-called 'acquired' forms of HLH are encountered in the context of severe infections, autoimmune and autoinflammatory diseases, malignancy, and metabolic disorders, and may also be associated with primary immunodeficiencies. This implies that a variety of disease mechanisms can lead to HLH. Today's research seeks to gain a better understanding of the various pathogenetic and environmental factors that converge to induce HLH. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Testing competing forms of the Milankovitch hypothesis

    DEFF Research Database (Denmark)

    Kaufmann, Robert K.; Juselius, Katarina

    2016-01-01

    We test competing forms of the Milankovitch hypothesis by estimating the coefficients and diagnostic statistics for a cointegrated vector autoregressive model that includes 10 climate variables and four exogenous variables for solar insolation. The estimates are consistent with the physical...... ice volume and solar insolation. The estimated adjustment dynamics show that solar insolation affects an array of climate variables other than ice volume, each at a unique rate. This implies that previous efforts to test the strong form of the Milankovitch hypothesis by examining the relationship...... mechanisms postulated to drive glacial cycles. They show that the climate variables are driven partly by solar insolation, determining the timing and magnitude of glaciations and terminations, and partly by internal feedback dynamics, pushing the climate variables away from equilibrium. We argue...

  19. Deflagration wave formed by ion beam, 3

    International Nuclear Information System (INIS)

    Niu, Keishiro; Abe, Takashi; Tamba, Moritake.

    1980-01-01

    An analysis is given for the structure of the deflagration wave which is formed in a target bombarded by an ion beam. Stationary deflagration and/or detonation waves are formed at the surface of the target in a case in which the reaction energy of direct fusion and/or the beam energy deposited in the target are less than a critical value. On the other hand, no solution for stationary wave exists, if the energy deposited in the wave exceeds a critical value. In the latter case, the time-dependent fundamental equations reduce approximately to a self-similar type of equations. Numerical integrations are carried out for this type of differential equations, and an example of self-similar deflagration wave numerically obtained is plotted in the figures. (author)

  20. Differential form representation of stochastic electromagnetic fields

    Science.gov (United States)

    Haider, Michael; Russer, Johannes A.

    2017-09-01

    In this work, we revisit the theory of stochastic electromagnetic fields using exterior differential forms. We present a short overview as well as a brief introduction to the application of differential forms in electromagnetic theory. Within the framework of exterior calculus we derive equations for the second order moments, describing stochastic electromagnetic fields. Since the resulting objects are continuous quantities in space, a discretization scheme based on the Method of Moments (MoM) is introduced for numerical treatment. The MoM is applied in such a way, that the notation of exterior calculus is maintained while we still arrive at the same set of algebraic equations as obtained for the case of formulating the theory using the traditional notation of vector calculus. We conclude with an analytic calculation of the radiated electric field of two Hertzian dipole, excited by uncorrelated random currents.

  1. Architectural Thermal Forms II: Brick Envelope

    DEFF Research Database (Denmark)

    Foged, Isak Worre

    2013-01-01

    The paper presents an architectural concept and design method that investigates the use of dynamic factors in evolutionary form finding processes. The architectural construct, phenotype, is based on a brick assembly and how this can be organized based upon material properties and environmental as...... aspects selected from the factors used in the Fanger equations to determine perceived comfort. The work finds that the developed method can be applied as performance oriented driver, while at the same time allowing diversity and variation in the architectural design space.......The paper presents an architectural concept and design method that investigates the use of dynamic factors in evolutionary form finding processes. The architectural construct, phenotype, is based on a brick assembly and how this can be organized based upon material properties and environmental...

  2. Construction of solid waste form test facility

    International Nuclear Information System (INIS)

    Park, Hyun Whee; Lee, Kang Moo; Koo, Jun Mo; Jung, In Ha; Lee, Jong Ryeul; Kim, Sung Whan; Bae, Sang Min; Cho, Kang Whon; Sung, Suk Jong

    1989-02-01

    The Solid Waste Form Test Facility (SWFTF) is now construction at DAEDUCK in Korea. In SWFTF, the characteristics of solidified waste products as radiological homogeneity, mechanical and thermal property, water resistance and lechability will be tested and evaluated to meet conditions for long-term storage or final disposal of wastes. The construction of solid waste form test facility has been started with finishing its design of a building and equipments in Sep. 1984, and now building construction is completed. Radioactive gas treatment system, extinguishers, cooling and heating system for the facility, electrical equipments, Master/Slave manipulator, power manipulator, lead glass and C.C.T.V. has also been installed. SWFTF will be established in the beginning of 1990's. At this report, radiation shielding door, nondestructive test of the wall, instrumentation system for the utility supply system and cell lighting system are described. (Author)

  3. Nucleon form factors. Probing the chiral limit

    International Nuclear Information System (INIS)

    Goeckeler, M.; Haegler, P.; Horsley, R.

    2006-10-01

    The electromagnetic form factors provide important hints for the internal structure of the nucleon and continue to be of major interest for experimentalists. For an intermediate range of momentum transfers the form factors can be calculated on the lattice. However, reliability of the results is limited by systematic errors due to the required extrapolation to physical quark masses. Chiral effective field theories predict a rather strong quark mass dependence in a range which was yet unaccessible for lattice simulations. We give an update on recent results from the QCDSF collaboration using gauge configurations with Nf=2, non-perturbatively O(a)-improved Wilson fermions at very small quark masses down to 340 MeV pion mass, where we start to probe the relevant quark mass region. (orig.)

  4. MODERN FORMS OF PARTNERSHIP IN BUSINESS

    Directory of Open Access Journals (Sweden)

    Markova V. D.

    2016-12-01

    Full Text Available The article examines tendencies of the development of new organizational forms of partnership and marks several problems of their usage in Russian conditions by the example of the Novosibirsk region. Modern forms of networking and partnership of commercial companies and universities, research institutes and other organizations, such as clusters, strategic alliances, technology platforms, business ecosystems and other, are focused on the development of new market opportunities and gaining competitive advantage through the sharing of assets and expertise. Two groups of strategic partnership initiatives in the business were emphasized: some initiatives are shown by the state, while some come from the companies. It has been shown that the development of digital technologies, which allows to establish connection between geographically separated participants, promotes the formation of new partnership tools, such as the technology platforms and business ecosystems built on their basis.

  5. Calculus of tensors and differential forms

    CERN Document Server

    Sinha, Rajnikant

    2014-01-01

    Calculus of tensors and differential forms is an introductory-level textbook. Through this book, students will familiarize themselves with tools they need in order to use for further study on general relativity and research, such as affine tensors, tensor calculus on manifolds, relative tensors, Lie derivatives, wedge products, differential forms, and Stokes' theorem. The treatment is concrete and in detail, so that abstract concepts do not deter even physics and engineering students. This self contained book requires undergraduate-level calculus of several variables and linear algebra as prerequisite. Fubini's theorem in real analysis, to be used in Stokes' theorem, has been proved earlier than Stokes' theorem so that students don't have to search elsewhere.

  6. Quaternion orders, quadratic forms, and Shimura curves

    CERN Document Server

    Alsina, Montserrat

    2004-01-01

    Shimura curves are a far-reaching generalization of the classical modular curves. They lie at the crossroads of many areas, including complex analysis, hyperbolic geometry, algebraic geometry, algebra, and arithmetic. The text provides an introduction to the subject from a theoretic and algorithmic perspective. The main topics covered in it are Shimura curves defined over the rational number field, the construction of their fundamental domains, and the determination of their complex multiplication points. The study of complex multiplication points in Shimura curves leads to the study of families of binary quadratic forms with algebraic coefficients and to their classification by arithmetic Fuchsian groups. In this regard, the authors develop a theory full of new possibilities which parallels Gauss' theory on the classification of binary quadratic forms with integral coefficients by the action of the modular group. Each topic covered in the book begins with a theoretical discussion followed by carefully worked...

  7. Annotating Logical Forms for EHR Questions.

    Science.gov (United States)

    Roberts, Kirk; Demner-Fushman, Dina

    2016-05-01

    This paper discusses the creation of a semantically annotated corpus of questions about patient data in electronic health records (EHRs). The goal is to provide the training data necessary for semantic parsers to automatically convert EHR questions into a structured query. A layered annotation strategy is used which mirrors a typical natural language processing (NLP) pipeline. First, questions are syntactically analyzed to identify multi-part questions. Second, medical concepts are recognized and normalized to a clinical ontology. Finally, logical forms are created using a lambda calculus representation. We use a corpus of 446 questions asking for patient-specific information. From these, 468 specific questions are found containing 259 unique medical concepts and requiring 53 unique predicates to represent the logical forms. We further present detailed characteristics of the corpus, including inter-annotator agreement results, and describe the challenges automatic NLP systems will face on this task.

  8. Elastic form factors at higher CEBAF energies

    Energy Technology Data Exchange (ETDEWEB)

    Petratos, G.G. [Kent State Univ., OH (United States)

    1994-04-01

    The prospects for elastic scattering from few body systems with higher beam energies at CEBAF is presented. The deuteron and{sup 3}He elastic structure functions A(Q{sup 2}) can be measured at sufficiently high momentum transfers to study the transition between the conventional meson-nucleon and the constituent quark-gluon descriptions. Possible improvements in the proton magnetic form factor data are also presented.

  9. Closed form bound-state perturbation theory

    Directory of Open Access Journals (Sweden)

    Ollie J. Rose

    1980-01-01

    Full Text Available The perturbed Schrödinger eigenvalue problem for bound states is cast into integral form using Green's Functions. A systematic algorithm is developed and applied to the resulting equation giving rise to approximate solutions expressed as functions of the given perturbation parameter. As a by-product, convergence radii for the traditional Rayleigh-Schrödinger and Brillouin-Wigner perturbation theories emerge in a natural way.

  10. Accessibility in cities: Transport and urban Form

    OpenAIRE

    Rode, Philipp; Floater, Graham; Thomopoulos, Nikolas; Docherty, James; Schwinger, Peter; Mahendra, Anjali; Fang, Wanli

    2017-01-01

    This paper focusses on one central aspect of urban development: transport and urban form and how the two shape the provision of access to people, goods and services, and information in cities. The more efficient this access, the greater the economic benefits through economies of scale, agglomeration effects and networking advantages. This paper discusses how different urban accessibility pathways impact directly on other measures of human development and environmental sustainability. It also ...

  11. Lubricants in Pharmaceutical Solid Dosage Forms

    OpenAIRE

    Jinjiang Li; Yongmei Wu

    2014-01-01

    Lubrication plays a key role in successful manufacturing of pharmaceutical solid dosage forms; lubricants are essential ingredients in robust formulations to achieve this. Although many failures in pharmaceutical manufacturing operations are caused by issues related to lubrication, in general, lubricants do not gain adequate attention in the development of pharmaceutical formulations. In this paper, the fundamental background on lubrication is introduced, in which the relationships between lu...

  12. A NEW FORM OF ALTERNATIVE TOURISM

    Directory of Open Access Journals (Sweden)

    Kamelia Grancharova

    2014-12-01

    Full Text Available Recently a new form of alternative tourism has emerged on the tourism market which could be determined as autohton by its causing motifs: travel to roots, to native land of ancestors and preancestors and experiencing the mythycal relation to the native land. Which is the motivation for that kind of tourism? What are the segments and how big is the market niche? Those and other questions are targeted to be answered by the paper according to its scope.

  13. Les formes graves de la grippe

    African Journals Online (AJOL)

    raoul

    29 févr. 2012 ... Cette tendance semble se confirmer dans la pandémie de 2009, en effet la grossesse est confirmé comme facteur de risque de formes graves de ..... l'intérêt de l'ECMO dans le traitement de la défaillance respiratoire dans le cas du SDRA, et nous incite à se doter du plateau technique et humain.

  14. Machining of Silicon-Ribbon-Forming Dies

    Science.gov (United States)

    Menna, A. A.

    1985-01-01

    Carbon extension for dies used in forming silicon ribbon crystals machined precisely with help of special tool. Die extension has edges beveled toward narrow flats at top, with slot precisely oriented and centered between flats and bevels. Cutting tool assembled from standard angle cutter and circular saw or saws. Angle cutters cuts bevels while slot saw cuts slot between them. In alternative version, custom-ground edges or additional circular saws also cut flats simultaneously.

  15. Forms of Exile: Contemporary Palestinian Life Writing

    OpenAIRE

    Brown, Sophia

    2017-01-01

    This thesis is an examination of contemporary exilic Palestinian life writing in English. Attentive to the ongoing nature of Palestinian dispossession since 1948, it focuses on how exile is narrated and the ways in which it informs models of selfhood within a context of conflict and loss. This involves adopting a framework of settler colonialism in order to understand the conflict. Broadly speaking, the thesis conceives of Palestinian life writing as a form of testimony posing an urgent and n...

  16. MODERN FORMS OF MANAGEMENT OF AGRICULTURAL BUSINESS

    OpenAIRE

    Nazarenko A. V.; Zaporozhets D. V.; Chernobay N. B.; Sergienko E. G.; Kenina D. S.; Chernikova L. I.; Babkina O. N.

    2015-01-01

    In this study, we have performed an analysis of the effective use of agricultural lands in Russia, using the methods of scientific management, as a modern form of agricultural business management. The analysis of effective models of world agricultural business, management and support, as well as the domestic and the European model of agriculture was given as well. The article contains suggestions and developing of the most rational and effective management methods for agricultural business, o...

  17. A mild form of Proteus syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Hauer, M.P.; Allmann, K.H.; Langer, M. [Abteilung Roentgendiagnostik, Radiologische Universitaetsklinik, Albert-Ludwigs-Universitaet Freiburg (Germany); Uhl, M. [Sektion Kinderradiologie, Albert-Ludwigs-Universitaet (Germany); Darge, K. [Radiologische Universitaetsklinik, Abteilung Kinderradiologie, Universitaet Heidelberg (Germany)

    1998-05-01

    Proteus syndrome is a rare congenital hamartomatous syndrome. We report on the clinical and radiological appearances of a boy in order to illustrate the typical signs which include subcutaneous masses, in mild forms partial gigantism of hands and feet, hemihypertrophy, and bony abnormalities. We discuss how to make the definitive diagnosis on the basis of using a known rating scale, important aspects of differential diagnosis and clinical features, and diagnostic management. (orig.) With 3 figs., 1 tab., 14 refs.

  18. Dynamics of 3-forms in seven dimensions

    Science.gov (United States)

    Krasnov, Kirill

    2017-11-01

    We continue to study a certain dynamical theory of 3-forms in seven dimensions, which can be viewed as a non-linear 7D analog of the 3D Abelian Chern-Simons theory. We perform the 6+1 split and show that the theory propagates three degrees of freedom. We also study the dimensional reduction on S 3. We find the resulting theory to be a variant of the 4D scalar-tensor theory of gravity.

  19. The Theory of Forming Submillimetre Galaxies

    Science.gov (United States)

    Narayanan, Desika

    2015-02-01

    Submillimetre-selected galaxies are the most luminous, heavily star-forming galaxies in the Universe. While this field has exploded observationally over the past decade and a half, theorists have struggled to develop a concordance model for their origin. Here, I review the major theoretical efforts in this field. I then present a newly developed model for the origin of this enigmatic population of galaxies.

  20. Hypersurfaces in simply connected space forms

    Indian Academy of Sciences (India)

    Statement of theorems. Let (M(κ), ds2) denote the simply connected space form of constant curvature κ = 0, 1 or −1 and dimension n + 1 ≥ 3. Let M be a hypersurface of (M(κ), ds2). For every point m ∈ M, let A: TmM → TmM be the Weingarten map of the hypersurface. In this paper we prove the following results. Theorem 1.

  1. Loss of form vision impairs spatial imagery

    OpenAIRE

    Occelli, Valeria; Lin, Jonathan B.; Lacey, Simon; Sathian, K.

    2014-01-01

    Previous studies have reported inconsistent results when comparing spatial imagery performance in the blind and the sighted, with some, but not all, studies demonstrating deficits in the blind. Here, we investigated the effect of visual status and individual preferences (“cognitive style”) on performance of a spatial imagery task. Participants with blindness resulting in the loss of form vision at or after age 6, and age- and gender-matched sighted participants, performed a spatial imagery ta...

  2. LOSS OF FORM VISION IMPAIRS SPATIAL IMAGERY

    OpenAIRE

    Valeria eOccelli; Jonathan B. Lin; Simon A Lacey; Krish eSathian; Krish eSathian

    2014-01-01

    Previous studies have reported inconsistent results when comparing spatial imagery performance in the blind and the sighted, with some, but not all, studies demonstrating deficits in the blind. Here, we investigated the effect of visual status and individual preferences (cognitive style) on performance of a spatial imagery task. Participants with blindness resulting in the loss of form vision at or after age 6, and age- and gender-matched sighted participants, performed a spatial imagery task...

  3. Star-Forming Complexes in Galaxies

    OpenAIRE

    Elmegreen, Bruce G.

    2004-01-01

    Star complexes are the largest globular regions of star formation in galaxies. If there is a spiral density wave, nuclear ring, tidal arm, or other well-defined stellar structure, then gravitational instabilities in the gaseous component produce giant cloud complexes with a spacing of about three times the width. These gas complexes form star complexes, giving the familiar beads on a string of star formation along spiral arms, or nuclear hotspots in the case of a ring. Turbulence compression,...

  4. MEANING AND FORM IN NURSERY RHYMES TRANSLATION

    Directory of Open Access Journals (Sweden)

    Ikke Dewi Pratama

    2017-07-01

    Full Text Available Abstract MAKNA DAN BENTUK DALAM PENERJEMAHAN LAGU-LAGU ANAK Abstract Translating nursery rhymes is not an easy task. The problems of equivalence in meaning and form as well as in the harmony between the translated lyrics and the music are aspects that need to be considered by the translators. By considering nursery rhyme lyric as poetry text, this research analyzes the equivalence of meaning and form in nursery rhymes translation. This research focuses on five nursery rhymes. The meaning analysis was done by conducting particular procedures on translation quality assessment. Meanwhile, the analysis of the form was conducted by comparing the two versions of the nursery rhymes focusing on the sound values. From the equivalence of meaning, the result shows that most nursery rhymes are translated less accurately. On the other hand, the finding of the equivalence in form shows that most of the auditory devices are deleted while most of the rhymes are shifted. This research is expected to give a contribution to song translation activities especially those involving children as the target listeners. Keywords: equivalence, accuracy, sound values, auditory devices, rhymes Abstrak Menerjemahkan lagu anak bukanlah hal yang mudah. Masalah kesepadanan makna dan bentuk, serta harmonisasi antara lirik terjemahan dan musik adalah aspek-aspek yang harus dipertimbangkan oleh penerjemah. Dengan mempertimbangkan lirik lagu anak sebagai teks puisi, penelitian ini menganalisis kesepadanan antara makna dan bentuk dalam terjemahan lagu anak. Dengan menggunakan teknik sampling, penelitian ini berfokus kepada lima lagu anak. Analisis makna dilakukan dengan prosedur penelitian kualitas terjemahan sedangkan analisis bentuk dilakukan dengan membandingkan dua versi lagu anak dengan fokus kepada sound values (bunyi. Analisis kesepadanan makna menunjukkan bahwa sebagian besar lagu anak diterjemahkan dengan kurang akurat. Dari segi bentuk, sebagian besar auditory devices

  5. TRANSIENT AMORPHOUS CALCIUM PHOSPHATE IN FORMING ENAMEL

    OpenAIRE

    Beniash, Elia; Metzler, Rebecca A.; Lam, Raymond S.K.; Gilbert, P.U.P.A.

    2009-01-01

    Enamel, the hardest tissue in the body, begins as a three-dimensional network of nanometer size mineral particles, suspended in a protein gel. This mineral network serves as a template for mature enamel formation. To further understand the mechanisms of enamel formation we characterized the forming enamel mineral at an early secretory stage using x-ray absorption near-edge structure (XANES) spectromicroscopy, transmission electron microscopy (TEM), FTIR microspectroscopy and polarized light m...

  6. Method and Apparatus for Forming Nanodroplets

    Science.gov (United States)

    Ackley, Donald; Forster, Anita

    2011-01-01

    This innovation uses partially miscible fluids to form nano- and microdroplets in a microfluidic droplet generator system. Droplet generators fabricated in PDMS (polydimethylsiloxane) are currently being used to fabricate engineered nanoparticles and microparticles. These droplet generators were first demonstrated in a T-junction configuration, followed by a cross-flow configuration. All of these generating devices have used immiscible fluids, such as oil and water. This immiscible fluid system can produce mono-dispersed distributions of droplets and articles with sizes ranging from a few hundred nanometers to a few hundred microns. For applications such as drug delivery, the ability to encapsulate aqueous solutions of drugs within particles formed from the droplets is desirable. Of particular interest are non-polar solvents that can dissolve lipids for the formation of liposomes in the droplet generators. Such fluids include ether, cyclohexane, butanol, and ethyl acetate. Ethyl acetate is of particular interest for two reasons. It is relatively nontoxic and it is formed from ether and acetic acid, and maybe broken down into its constituents at relatively low concentrations.

  7. Ultrasonographic features of pseudotumorous form of ascariasis

    Energy Technology Data Exchange (ETDEWEB)

    Hui, Joyce Y.H.; Woo, Patrick C.Y. E-mail: pcywoo@hkucc.hku.hk; Kan, Pan Shing; Lai, Yeong Man; Tang, Alice P.Y

    2001-09-01

    We report the ultrasonographic findings of a 60 year old woman with pseudotumorous form of ascariasis. Real-time ultrasonographic examination using a curved array transducer revealed grossly thickened small bowel loops, multiple small circular deposits throughout the peritoneal cavity, and a moderate amount of ascites. The English literature on the different forms of abdominal ascariasis is reviewed. Specific signs, which include the 'strip' sign, the 'four-lines', 'inner tube', or 'double tube' sign, the 'bull's eye' or 'target' sign, a 'worm mass' or 'spaghetti-like' appearance, and the 'zig-zag' sign can be present in any form of abdominal ascariasis, as they represent the image of the Ascaris worms visualized under ultrasonographic examination. However, the non-specific signs are not peculiar to A. lumbricoides infections, but are results of secondary changes due to A. lumbricoides infections in the corresponding organs.

  8. Genetic forms of neurohypophyseal diabetes insipidus.

    Science.gov (United States)

    Rutishauser, Jonas; Spiess, Martin; Kopp, Peter

    2016-03-01

    Neurohypophyseal diabetes insipidus is characterized by polyuria and polydipsia owing to partial or complete deficiency of the antidiuretic hormone, arginine vasopressin (AVP). Although in most patients non-hereditary causes underlie the disorder, genetic forms have long been recognized and studied both in vivo and in vitro. In most affected families, the disease is transmitted in an autosomal dominant manner, whereas autosomal recessive forms are much less frequent. Both phenotypes can be caused by mutations in the vasopressin-neurophysin II (AVP) gene. In transfected cells expressing dominant mutations, the mutated hormone precursor is retained in the endoplasmic reticulum, where it forms fibrillar aggregates. Autopsy studies in humans and a murine knock-in model suggest that the dominant phenotype results from toxicity to vasopressinergic neurons, but the mechanisms leading to cell death remain unclear. Recessive transmission results from AVP with reduced biologic activity or the deletion of the locus. Genetic neurohypophyseal diabetes insipidus occurring in the context of diabetes mellitus, optic atrophy, and deafness is termed DIDMOAD or Wolfram syndrome, a genetically and phenotypically heterogeneous autosomal recessive disorder caused by mutations in the wolframin (WFS 1) gene. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Flavor content of nucleon form factors

    Energy Technology Data Exchange (ETDEWEB)

    Bijker, R. [Departamento de Estructura de la Materia, lnstituto de Ciencias Nucleares, UNAM, AP 70-543, 04510 Mexico D.F. (Mexico); Santopinto, E [l.N.F.N. and Dipartimento di Fisica, via Dodecaneso 33, Genova, I-16146 (Italy)]. e-mail: bijkernucleares. unam. mx

    2007-12-15

    The flavor content of nucleon form factors is analyzed using two different theoretical approaches. The first is based on a phenomenological two-component model in which the external photon couples to both an intrinsic three-quark structure and a meson cloud via vector-meson dominance. The flavor content of the nucleon form factors is extracted without introducing any additional parameter. A comparison with recent data from parity-violating electron scattering experiments shows a good overall agreement for the strange form factors. A more microscopic approach is that of an unquenched quark model proposed by Geiger and Isgur which is based on valence quark plus glue dominance to which quark-antiquark pairs are added in perturbation. In the original version the importance of ss loops in the proton was studied. Here we present the formalism for a new generation of unquenched quark models which, among other extensions, includes the contributions of uu and dd loops. Finally, we discuss some preliminary results in the closure limit. (Author)

  10. TS/EL ELECTRICAL WORK REQUEST FORM

    CERN Multimedia

    TS Department

    2008-01-01

    To facilitate the processing of requests for minor electrical installation work to be carried out by the TS/EL group, a new procedure designed to improve contacts and exchange of information with customers has been set up. The procedure comprises a check to determine whether the TS/EL or the TS/FM group is responsible for the area where the electrical work is to be done. If the work is to be performed by the EL group, an on-line request form must be completed. The following steps must be completed: On a web browser, use the link http://ts-dep.web.cern.ch/ts-dep/groups/el/el.htm In the left-hand menu choose ‘Demande de Travaux Electriques’ Enter the building number to check which group to contact and click ‘FIND’ If the area is: Under FM’s responsibility:\tCall 77777 Under EL’s responsibility:\tClick the link to the work form, complete it and send it (click ‘ENVOYER’) IMPORTANT This form is for minor electrical installation requests only. Please call 72201 in t...

  11. Elastic magnetic form factors of exotic nuclei

    International Nuclear Information System (INIS)

    Dong Tiekuang; Guo Yanqing; Ren Zhongzhou

    2007-01-01

    How to identify the orbital of the valence nucleon(s) of exotic nuclei is an important problem. The elastic magnetic electron scattering is an excellent probe to determine the valence structure of odd-A nuclei. The relativistic mean-field theory has been successfully applied to systematic studies of the elastic charge electron scattering from even-even exotic nuclei. The extension of this method to investigate the elastic magnetic electron scattering from odd-A exotic nuclei is a natural generalization. The experimental form factors of 17 O and 41 Ca are reproduced very well with the help of the spectroscopic factors which are introduced into the relativistic treatment of the magnetic electron scattering for the first time. The emphases are put on the magnetic form factors of 15,17,19 C, 23 O, 17 F, and 49,59 Ca calculated in the relativistic impulse approximation. Great differences have been found in the form factors of the same nucleus with different configurations. Therefore, the elastic magnetic electron scattering can be used to determine the orbital of the last nucleon of odd-A exotic nuclei. Our results can provide references for the electron scattering from exotic nuclei in the near future

  12. Study of transitory forms of carotenoids

    International Nuclear Information System (INIS)

    Mathis, Paul

    1970-01-01

    In order to explain the biological role of the carotenoids their transitory forms were studied with an apparatus measuring the small (∼10 -3 ) short-lived (100 ns to 1 ms) optical density variations obtained by excitation with a ruby laser. Two forms were studied: a) Triplet state 3 Car. - This state (t 1/2 ∼6 μs) is obtained not by direct excitation but by T-T energy transfer from chlorophyll, in different media (chloroplasts, pigments in solution or in micelle). Two arguments can be advanced to explain in terms of triplet energy transfer an essential biological role of carotenoids, protection against photodynamic effects: - the energy level of 3 Car is lower than that of the singlet of oxygen; - in vivo the T-T transfer from chlorophyll to the carotenoids is very fast: 30 ns.. b) Radical cation Car + . - This form is obtained by electron transfer from carotene to the triplet of Toluidine Blue, in ethanol. Car + (t 1/2 ∼200 μs) shows a strong absorption band at 910 nm. The properties of Car + are discussed in relation to other polyene derivatives and to hydrocarbon ions. Car + could be involved in certain biological electron transfers. (author) [fr

  13. Canine intestinal histoplasmosis containing hyphal forms.

    Science.gov (United States)

    Schumacher, Loni L; Love, Brenda C; Ferrell, Mark; DeSilva, Udaya; Fernando, Ruchika; Ritchey, Jerry W

    2013-03-01

    A 12-year-old intact male Miniature Schnauzer dog with chronic diarrhea that was unresponsive to empirical treatment was presented to a referring veterinarian. A laparotomy was performed, and formalin-fixed biopsies of duodenum, jejunum, and colon were sent to Oklahoma Animal Disease Diagnostic Laboratory for evaluation. Histologic examination revealed a severe, diffuse, granulomatous enteritis and colitis with intralesional yeast and hyphal forms. Grocott methenamine silver stains revealed short, aseptate hyphae co-mingled with 2-8 µm, oval to round yeast organisms consistent with Histoplasma capsulatum. The atypical presentation of both yeast and hyphal forms prompted identification of the organism. Direct sequencing of a polymerase chain reaction product from paraffin-embedded intestinal samples confirmed the presence of Ajellomyces capsulatus with a homology over 99% to several sequences in GenBank. Ajellomyces capsulatus is the holomorphic name for H. capsulatum. Therefore, the mycelial form of a dimorphic fungus such as H. capsulatum can coexist with yeast cells within lesions of histoplasmosis. Following diagnosis, the dog was treated with itraconazole for 6 months and has improved.

  14. Selection of a carbon-14 fixation form

    International Nuclear Information System (INIS)

    Scheele, R.D.; Burger, L.L.

    1982-09-01

    This report summarizes work on the selection of a disposal form for carbon-14 produced during the production of nuclear power. Carbon compounds were screened on the basis of solubility, thermal stability, resistance to oxidation, cost and availability, compatibility with the selected disposal matrix, leach resistance when incorporated in concrete, and compatibility with capture technologies. Carbonates are the products of the various technologies presently considered for carbon-14 capture. The alkaline earth carbonates exhibit the greatest thermal stabilities, lowest solubilities, lowest raw material cost, and greatest raw material availabilities. When reactions with cement and its impurities are considered, calcium and strontium carbonates are the only alkaline earth carbonates resistant to hydrolysis and reaction with sulfate. Leaching tests of barium, calcium, lead, potassium, and strontium carbonates in concrete showed calcium carbonate concrete to be slightly superior to the other alkaline earth carbonates, and greatly superior to a soluble carbonate, potassium carbonate, and lead carbonate. None of the additives to the concrete reduced the carbonate leaching. Acidic CO 2 -containing waters were found to greatly increase carbonate leaching from concrete. Sea water was found to leach less carbon from carbonate concretes than either distilled water or Columbia River water, which showed nearly equivalent leaching. Based on our work, calcium, barium, and strontium carbonates in concrete are the most suitable waste forms for carbon-14, with calcium carbonate concrete slightly superior to the others. If the waste form is to be exposed to natural waters, sea water will have the lowest leach rate. 6 figures, 7 tables

  15. An improved rolled strip pulse forming line.

    Science.gov (United States)

    Li, Song; Qian, Bao-Liang; Yang, Han-Wu; Gao, Jing-Ming; Liu, Zhao-Xi

    2013-06-01

    The rolled strip pulse forming line (RSPFL) has advantages of compactness, portability, and long pulse achievability which could well meet the requirements of industrial application of the pulse power technology. In this paper, an improved RSPFL with an additional insulator between the grounded conductors is investigated numerically and experimentally. Results demonstrate that the jitter on the flat-top of the output voltage waveform is reduced to 3.8% due to the improved structure. Theoretical analysis shows that the electromagnetic coupling between the conductors of the RSPFL strongly influences the output voltage waveform. Therefore, the new structure was designed to minimize the detrimental effect of the electromagnetic coupling. Simulation results show that the electromagnetic coupling can be efficiently reduced in the improved RSPFL. Experimental results illustrate that the improved RSPFL, with dimensions and weight of Φ 290 × 250 mm and 16 kg, when used as a simple pulse forming line, could generate a well shaped quasi-square pulse with output power of hundreds of MW and pulse duration of 250 ns. Importantly, the improved RSPFL was successfully used as a Blumlein pulse forming line, and a 10.8 kV, 260 ns quasi-square pulse was obtained on a 2 Ω dummy load. Experiments show reasonable agreement with numerical analysis.

  16. Ultrasonic imaging of sheet metal forming.

    Science.gov (United States)

    Keitmann-Curdes, Oliver; Hansen, Christian; Knoll, Patrick; Meier, Horst; Ermert, Helmut

    2004-04-01

    With sheet metal hydroforming, a sheet metal is formed by a liquid medium under high pressure (up to 1000 bar) and a cavity contour (die). As the exact state of forming is of interest, an ultrasonic imaging system is under development. The task is to determine the geometry of a sheet metal contour with respect to the original (before forming) and the final (die) state of the sheet metal. For this purpose, two different contour reconstruction algorithms were designed, tested and compared. With the reconstruction results it will be possible to determine the optimal distribution of transmitters and receivers in the ultrasonic transducer matrix. Experiments were conducted with one pair of transducers (unfocussed, center frequency 2 MHz) and a three axis stepper motor set-up. For each experimental set of data, the contour was reconstructed with both SAFT reconstruction algorithms. Both algorithms incorporate a priori information such as original and final contour and maximal axial dislocation of the sheet metal. The results for both algorithms are compared and the relative mean error in axial direction is 0.30% and 0.48%.

  17. PEER FEEDBACK ON LANGUAGE FORM IN TELECOLLABORATION

    Directory of Open Access Journals (Sweden)

    Paige Ware

    2008-02-01

    Full Text Available We performed a two-phase, year-long research project that explored the impact of peer feedback on language development. We investigated specifically how and when post-secondary learners of English and Spanish provide corrective feedback on their partners' use of the target language in weekly asynchronous discussions by assigning them to one of two conditions: e-tutoring, in which students were asked to provide peer feedback on any linguistic form they perceived as incorrect; and e-partnering, in which students were not required to provide peer feedback but could do so on their own initiative. We examined the frequency and type of language use by coding the feedback for language-related episodes (Swain & Lapkin, 1998 and for feedback strategies (Ros i Solé & Truman, 2005. The findings indicate that students in both conditions preferred an inclusion of feedback on form as part of their exchange, but such feedback only occurred when explicitly required in the e-tutoring condition. Pedagogical implications include the need to situate peer feedback on form within current models of telecollaboration and to assist students in using feedback strategies such as reformulations, which do not rely on a deep understanding of the target or native language grammar.

  18. Taxation and forms of organizing business activities

    Directory of Open Access Journals (Sweden)

    Đinđić Srđan

    2013-01-01

    Full Text Available This paper takes sample tax regimes and tendencies from the developed countries in the EU-15 and the USA, and uses them to analyse the influence of taxation on the choice of organizational form of profit-oriented entities in Serbia. In order to understand how the procedure of taxation affects the sphere of business decision-making it is necessary to focus on the tax status of business losses and valorization and the effects of the double taxation of dividends. The rule of successive deduction of losses ensures the fiscally transparent entity receives a tax saving in the form of a reduction of the present value of the total paid tax. Meanwhile the corporation is handicapped because it postpones loss deductions, that is, it postpones tax saving, which directly influences the level of the present value of saved tax. The global trend of gradually moving from the classical system towards shareholder relief provision, above all in the form of a reduced withholding tax rate on dividends, has two opposing features: it simplifies the tax procedure while neglecting the distributional aims (consequences of taxation. The analysis of a particular practical example from the Serbian tax context enables us to draw a conclusion in relation to the relative taxes paid by entrepreneurs versus enterprises. The developed countries favour fiscally transparent entities, whereas Serbia allocates tax privileges to enterprises.

  19. Higgs form factors in Associated Production

    CERN Document Server

    Isidori, Gino; CERN

    2014-01-01

    We further develop a form factor formalism characterizing anomalous interactions of the Higgs-like boson (h) to massive electroweak vector bosons (V) and generic bilinear fermion states (F). Employing this approach, we examine the sensitivity of pp -> F ->Vh associated production to physics beyond the Standard Model, and compare it to the corresponding sensitivity of h -> V F decays. We discuss how determining the Vh invariant-mass distribution in associated production at LHC is a key ingredient for model-independent determinations of h V F interactions. We also provide a general discussion about the power counting of the form factor's momentum dependence in a generic effective field theory approach, analyzing in particular how effective theories based on a linear and non-linear realization of the SU(2)_L x U(1)_Y gauge symmetry map into the form factor formalism. We point out how measurements of the differential spectra characterizing h -> V F decays and pp -> F -> Vh associated production could be the leadi...

  20. Dental implant superstructures by superplastic forming

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, R.V.; Garriga-Majo, D.; Soo, S.; Pagliaria, D. [Kings Coll., London (United Kingdom). Dept. of Dental Biomaterials Science; Juszczyk, A.S.; Walter, J.D. [Kings Coll., London (United Kingdom). Dept. of Prosthetic Dentistry

    2001-07-01

    A novel application of superplastic forming is described for the production of fixed-bridge dental implant superstructures. Finite element analysis (FEA) has shown that Ti-6Al-4V sheet would be a suitable candidate material for the design of a fixed-bridge dental implant superstructure. Traditionally superstructures are cast in gold alloy onto pre-machined gold alloy cylinders but castings are often quite bulky and 25% of castings do not fit accurately (1) which means that sectioning and soldering is required to obtain a fit that is clinically acceptable and will not prejudice the integrity of the commercially pure cp-titanium implants osseointegrated with the bone. Superplastic forming is shown to be a forming technique that would allow the production of strong, light-weight components of thin section with low residual stress that could be suitable for such applications. Considerable cost savings over traditional dental techniques can be achieved using a low-cost ceramic die material. The properties of these die materials are optimised so that suitable components can be produced. Satisfactory hot strength is demonstrated and thermal properties are matched to those of the titanium alloy for accurate fit of the prosthesis. (orig.)

  1. MIXING SOLUTIONS IN INKJET FORMED VESICLES

    Science.gov (United States)

    Li, Thomas H.; Stachowiak, Jeanne C.

    2010-01-01

    Controlling the contents of liposomes and vesicles is essential for their use in medicine, biotechnology, and basic research. Cargos such as proteins, DNA, and RNA are of growing interest for therapeutic applications as well as for fundamental studies of cellular organization and function, but controlled encapsulation and mixing of biomolecules within vesicles has been a challenge. Recently, micro fluidic encapsulation has been shown to efficiently load arbitrary solutions of biomolecules into unilamellar vesicles. This method utilizes a piezo-electrically driven liquid jet to deform a planar bilayer and form a vesicle, with the fluid vortex formed by the jet mixing the solution in the jet with the surrounding solution. Here, we describe the equipment and protocol used for loading mixtures within unilamellar vesicles by microfluidic encapsulation, and we measure the encapsulated fraction to be 79 ± 5% using a falling vesicle technique. Additionally, we find that the presence of a continuous flow from the nozzle and changes in actuation voltage polarity do not significantly affect the encapsulated fraction. These results help to guide current applications and future development of this microfluidic encapsulation technique for forming and loading unilamellar vesicles. PMID:19913162

  2. FluidForming – Hydroforming reinvented

    Directory of Open Access Journals (Sweden)

    Pannock Jürgen

    2015-01-01

    Full Text Available The FluidForming technology represents an alternative sheet metal forming approach as compared to the traditional, bladder based hydroforming, metal spinning, and sheet metal stamping processes. The machine construction allows for much higher forming pressures of up to 400 MPa/60,000 psi. The technology also enables material flow into the dies, thus, providing more material in potentially critical areas. Modular die construction allows for very cost effective solutions including plastic dies, 3D printed dies, die nesting, and split dies. This approach, in-turn, allows undercuts in the parts and generates scratch- and mostly distortion-free parts from pre-painted, pre-patterned, and pre-polished materials like AL, SS, CU, TI or any of the new high performance alloys. As a result, the technology enables a new product development approach that can focus on optimization and/or Time-to-Market while maintaining or lowering the overall Cost-to-Market. In fact, the development cycle can be accelerated to be less than a week from the CAD design to the production of highly accurate, repeatable metal parts that may not even be manufacturable with other technologies.

  3. Abelian 2-form gauge theory: special features

    International Nuclear Information System (INIS)

    Malik, R P

    2003-01-01

    It is shown that the four (3 + 1)-dimensional (4D) free Abelian 2-form gauge theory provides an example of (i) a class of field theoretical models for the Hodge theory, and (ii) a possible candidate for the quasi-topological field theory (q-TFT). Despite many striking similarities with some of the key topological features of the two (1 + 1)-dimensional (2D) free Abelian (and self-interacting non-Abelian) gauge theories, it turns out that the 4D free Abelian 2-form gauge theory is not an exact TFT. To corroborate this conclusion, some of the key issues are discussed. In particular, it is shown that the (anti-)BRST and (anti-)co-BRST invariant quantities of the 4D 2-form Abelian gauge theory obey recursion relations that are reminiscent of the exact TFTs but the Lagrangian density of this theory is not found to be able to be expressed as the sum of (anti-)BRST and (anti-)co-BRST exact quantities as is the case with the topological 2D free Abelian (and self-interacting non-Abelian) gauge theories

  4. Scattering Amplitudes Interpolating Between Instant Form and Front Form of Relativistic Dynamics

    NARCIS (Netherlands)

    Ji, C.R.; Bakker, B.L.G.; Li, Z.

    2014-01-01

    Among the three forms of relativistic Hamiltonian dynamics proposed by Dirac in 1949, the front form has the largest number of kinematic generators. This distinction provides useful consequences in the analysis of physical observables in hadron physics. Using the method of interpolation between the

  5. A reconstituted light-harvesting complex from the green sulfur bacterium Chlorobium tepidum containing CsmA and bacteriochlorophyll a

    DEFF Research Database (Denmark)

    Pedersen, Marie Ø; Pham, Lan; Steensgaard, Dorte B

    2008-01-01

    chlorosomes were lyophilized and extracted with chloroform/methanol (1:1, v/v). The extract was further purified using gel filtration and reverse-phase HPLC and the purity of the preparation confirmed by SDS-PAGE. Mass spectrometric analysis showed an m/z of 6154.8, in agreement with the calculated mass...

  6. Operative treatment of severe forms of hypospadias.

    Science.gov (United States)

    Abramovic, V

    1981-10-01

    Hypospadias is a polymorphic congenital malformation. Aside from the main defect-partial hypoplasia of the urethra--there are other associated malformations: meatal stenosis, penile curvature, penoscrotal skin malformations (pterygiae), partial aplasia of the ventral prepuce, and a large dorsal prepuce. Severe forms are accompanied by hypoplasia of the penis. Hypospadias can be divided into simple forms (anterior hypospadias), in which the meatus is located on the distal half of the penis, and severe forms (posterior hypospadias), in which the meatus is located on the proximal half of the penis, the penoscrotal border, scrotal sulcus, or perineum, either primarily or after elongation and chordectomy. The differences are not only morphological but have practical significance. These two types of hypospadias differ as to operative procedure, complications, and operative results, and cannot be compared with each other. Thus hypospadias must not be considered a single entity, as is often done in the literature, as this may lead to misinterpretation of results. Severe forms of hypospadias are a special problem which require more sophisticated corrective procedures; they are associated with a greater incidence of complications and the aesthetic result is not as good as in the other group. After disappointing results using the Denis-Browne, Cecil, and Broadbent methods, we modified Grob's preputial tube-plasty 15 years ago. This technique enables reconstruction of the urethra with a sufficiently large, well-vascularized, non-hair-bearing preputial skin. The new urethra is long and large enough, and grows along with the penis, avoiding secondary curvature. The incidence of postoperative fistulas is low, and secondary closure is simple and safe. The aesthetic result is also satisfactory. The disadvantage of this method, namely the three-stage operative procedure, is compensated for by the low incidence of fistulas, lower operative risk, and shorter duration of each operation

  7. Waste Form Features, Events, and Processes

    International Nuclear Information System (INIS)

    R. Schreiner

    2004-01-01

    The purpose of this report is to evaluate and document the inclusion or exclusion of the waste form features, events and processes (FEPs) with respect to modeling used to support the Total System Performance Assessment for License Application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical bases for screening decisions. This information is required by the Nuclear Regulatory Commission (NRC) in 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The FEPs addressed in this report deal with the issues related to the degradation and potential failure of the waste form and the migration of the waste form colloids. For included FEPs, this analysis summarizes the implementation of the FEP in TSPA-LA, (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical bases for exclusion from TSPA-LA (i.e., why the FEP is excluded). This revision addresses the TSPA-LA FEP list (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The primary purpose of this report is to identify and document the analyses and resolution of the features, events, and processes (FEPs) associated with the waste form performance in the repository. Forty FEPs were identified that are associated with the waste form performance. This report has been prepared to document the screening methodology used in the process of FEP inclusion and exclusion. The analyses documented in this report are for the license application (LA) base case design (BSC 2004 [DIRS 168489]). In this design, a drip shield is placed over the waste package and no backfill is placed over the drip shield (BSC 2004 [DIRS 168489]). Each FEP may include one or more specific issues that are collectively described by a FEP name and a FEP description. The FEP description may encompass a single feature, process or event, or a few closely related or coupled processes if the entire FEP can be addressed by a single specific screening argument or TSPA-LA disposition. The FEPs are

  8. CRYSTALLINE CERAMIC WASTE FORMS: REFERENCE FORMULATION REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Brinkman, K.; Fox, K.; Marra, J.

    2012-05-15

    The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be successfully produced from a melting and crystallization process. The objective of this report is to explain the design of ceramic host systems culminating in a reference ceramic formulation for use in subsequent studies on process optimization and melt property data assessment in support of FY13 melter demonstration testing. The waste stream used as the basis for the development and testing is a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. In addition to the combined CS/LN/TM High Mo waste stream, variants without Mo and without Mo and Zr were also evaluated. Based on the results of fabricating and characterizing several simulated ceramic waste forms, two reference ceramic waste form compositions are recommended in this report. The first composition targets the CS/LN/TM combined waste stream with and without Mo. The second composition targets

  9. International Recognition of FormAkademisk

    Directory of Open Access Journals (Sweden)

    Janne Beate Reitan

    2017-12-01

    Full Text Available FormAkademisk was invited to the Design Journal Editors' Meeting at the College of Design, Architecture, Art, and Planning (DAAP, University of Cincinnati in late October, as the only design research journal from the Nordic region. The meeting was organized in advance of the International Association of Societies of Design Research (IASDR 2017 conference.Liv Merete Nielsen, who initiated the creation of  FormAkademisk and has been a Section Editor since the start-up and I, who have been the Editor-in-Chief for the entire period, travelled to the meeting.FormAkademisk   was in good company - among the others invited, we can mention the American Design Issues and the British Design Studies, both of which are at Level 2 of the Norwegian Science Index - NVI. Other reputable journals invited were the International Journal of Design from Taiwan, She Ji - The Journal of Design, Economics, and Innovation from Tongji University in Shanghai, China, Design and Culture from the United States, Co-Design from the United Kingdom, Information Design Journal published in the Netherlands with an international editorial board, Journal of Design, Business & Society with an international editorial board, the French Sciences du Design and Visible Language published at the University of Cincinnati, USA who hosted the meeting.First, we warmed up by describing each journal's editorial profile. For FormAkademisk we emphasized that we have two equal focuses – research in design, but also research in design education for the general public. This combination seems to be unique internationally.Common issues we discussed further were challenges with the quality of submitted articles and obtaining qualified peer reviewers. We also discussed whether we would agree on a common understanding of what it means to be included as an author of an article. Based on the discussions, FormAkademisk comes well prepared compared to the other internationally leading design research

  10. 13 CFR 120.194 - Use of computer forms.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Use of computer forms. 120.194... Applying to All Business Loans Computerized Sba Forms § 120.194 Use of computer forms. Any Applicant or Participant may use computer generated SBA application forms, closing forms, and other forms designated by SBA...

  11. A regression-based Kansei engineering system based on form feature lines for product form design

    Directory of Open Access Journals (Sweden)

    Yan Xiong

    2016-06-01

    Full Text Available When developing new products, it is important for a designer to understand users’ perceptions and develop product form with the corresponding perceptions. In order to establish the mapping between users’ perceptions and product design features effectively, in this study, we presented a regression-based Kansei engineering system based on form feature lines for product form design. First according to the characteristics of design concept representation, product form features–product form feature lines were defined. Second, Kansei words were chosen to describe image perceptions toward product samples. Then, multiple linear regression and support vector regression were used to construct the models, respectively, that predicted users’ image perceptions. Using mobile phones as experimental samples, Kansei prediction models were established based on the front view form feature lines of the samples. From the experimental results, these two predict models were of good adaptability. But in contrast to multiple linear regression, the predict performance of support vector regression model was better, and support vector regression is more suitable for form regression prediction. The results of the case showed that the proposed method provided an effective means for designers to manipulate product features as a whole, and it can optimize Kansei model and improve practical values.

  12. Administration of Caffeine in Alternate Forms.

    Science.gov (United States)

    Wickham, Kate A; Spriet, Lawrence L

    2018-03-01

    There has been recent interest in the ergogenic effects of caffeine delivered in low doses (~ 200 mg or ~ 3 mg/kg body mass) and administered in forms other than capsules, coffee and sports drinks, including chewing gum, bars, gels, mouth rinses, energy drinks and aerosols. Caffeinated chewing gum is absorbed quicker through the buccal mucosa compared with capsule delivery and absorption in the gut, although total caffeine absorption over time is not different. Rapid absorption may be important in many sporting situations. Caffeinated chewing gum improved endurance cycling performance, and there is limited evidence that repeated sprint cycling and power production may also be improved. Mouth rinsing with caffeine may stimulate nerves with direct links to the brain, in addition to caffeine absorption in the mouth. However, caffeine mouth rinsing has not been shown to have significant effects on cognitive performance. Delivering caffeine with mouth rinsing improved short-duration, high-intensity, repeated sprinting in normal and depleted glycogen states, while the majority of the literature indicates no ergogenic effect on aerobic exercise performance, and resistance exercise has not been adequately studied. Studies with caffeinated energy drinks have generally not examined the individual effects of caffeine on performance, making conclusions about this form of caffeine delivery impossible. Caffeinated aerosol mouth and nasal sprays may stimulate nerves with direct brain connections and enter the blood via mucosal and pulmonary absorption, although little support exists for caffeine delivered in this manner. Overall, more research is needed examining alternate forms of caffeine delivery including direct measures of brain activation and entry of caffeine into the blood, as well as more studies examining trained athletes and female subjects.

  13. [Definition, etiology, classification and presentation forms].

    Science.gov (United States)

    Mas Garriga, Xavier

    2014-01-01

    Osteoarthritis is defined as a degenerative process affecting the joints as a result of mechanical and biological disorders that destabilize the balance between the synthesis and degradation of joint cartilage, stimulating the growth of subchondral bone; chronic synovitis is also present. Currently, the joint is considered as a functional unit that includes distinct tissues, mainly cartilage, the synovial membrane, and subchondral bone, all of which are involved in the pathogenesis of the disease. Distinct risk factors for the development of osteoarthritis have been described: general, unmodifiable risk factors (age, sex, and genetic makeup), general, modifiable risk factors (obesity and hormonal factors) and local risk factors (prior joint anomalies and joint overload). Notable among the main factors related to disease progression are joint alignment defects and generalized osteoarthritis. Several classifications of osteoarthritis have been proposed but none is particularly important for the primary care management of the disease. These classifications include etiological (primary or idiopathic forms and secondary forms) and topographical (typical and atypical localizations) classifications, the Kellgren and Lawrence classification (radiological repercussions) and that of the American College of Rheumatology for osteoarthritis of the hand, hip and knee. The prevalence of knee osteoarthritis is 10.2% in Spain and shows a marked discrepancy between clinical and radiological findings. Hand osteoarthritis, with a prevalence of symptomatic involvement of around 6.2%, has several forms of presentation (nodal osteoarthritis, generalized osteoarthritis, rhizarthrosis, and erosive osteoarthritis). Symptomatic osteoarthritis of the hip affects between 3.5% and 5.6% of persons older than 50 years and has different radiological patterns depending on femoral head migration. Copyright © 2014 Elsevier España, S.L. All rights reserved.

  14. The dialectic as scientific form of exposition

    OpenAIRE

    César Ruíz Sanjuán

    2014-01-01

    The aim of this work is to point out the specific characters that present Marx’s conception of the dialectic as scientific form of exposition. In order to it we distinguish the conception of the dialectic that appears in his writings of youth from the one that appears in his mature work, and we show that in the latter the dialectic is not referred to the historical development, but to the theoretical exposition of the developed capitalist system. Then we deal with the issue of the succession ...

  15. Insafing: New Promising Form of Intellectual Communication

    Directory of Open Access Journals (Sweden)

    Yury P. Dus

    2014-06-01

    Full Text Available The article explores a new form of intellectual communication built in accordance with an in-advance-prepared sense scheme. This type of communication utilizes the elements of Activity Organizing Games called Insafing. The article suggests a retrospective review of the scientific researches, particularly, the researches of the Russian scientific schools that served as the basis for Insafing technology development. Furthermore, the scientific and methodological fundamentals of Insafing based on the Theory of Dynamic Information Systems (TDIS and the methods of cognitive engineering are discussed. The article also provides an example of Insafing application to tourism industry development in an urban area.

  16. Forming of bulk metallic glass microcomponents

    DEFF Research Database (Denmark)

    Wert, John A.; Thomsen, Christian; Jensen, Rune Debel

    2009-01-01

    The present article considers forward extrusion, closed-die forging and backward extrusion processes for fabrication of individual microcomponents from two bulk metallic glass (BMG) compositions: Mg60Cu30Y10 and Zr44Cu40Ag8Al8. Two types of tooling were used in the present work: relatively massive...... die sets characteristic of cold forming operations for crystalline metals and lightweight die sets adapted to the special characteristics of BMGs. In addition to demonstrating that microcomponents of several geometries can be readily fabricated from BMGs, rheological properties are combined...

  17. Graph Quasicontinuous Functions and Densely Continuous Forms

    Directory of Open Access Journals (Sweden)

    Lubica Hola

    2017-07-01

    Full Text Available Let $X, Y$ be topological spaces. A function $f: X \\to Y$ is said to be graph quasicontinuous if there is a quasicontinuous function $g: X \\to Y$ with the graph of $g$ contained in the closure of the graph of $f$. There is a close relation between the notions of graph quasicontinuous functions and minimal usco maps as well as the notions of graph quasicontinuous functions and densely continuous forms. Every function with values in a compact Hausdorff space is graph quasicontinuous; more generally every locally compact function is graph quasicontinuous.

  18. Spore-Forming Bacteria that Resist Sterilization

    Science.gov (United States)

    LaDuc, Myron; Venkateswaran, Kasthuri

    2003-01-01

    A report presents a phenotypic and genotypic characterization of a bacterial species that has been found to be of the genus Bacillus and has been tentatively named B. odysseensis because it was isolated from surfaces of the Mars Odyssey spacecraft as part of continuing research on techniques for sterilizing spacecraft to prevent contamination of remote planets by terrestrial species. B. odysseensis is a Gram-positive, facultatively anaerobic, rod-shaped bacterium that forms round spores. The exosporium has been conjectured to play a role in the elevated resistance to sterilization. Research on the exosporium is proposed as a path toward improved means of sterilization, medical treatment, and prevention of biofouling.

  19. Standard forms of construction contracts in Romania

    Directory of Open Access Journals (Sweden)

    Cristian Bănică

    2013-12-01

    Full Text Available Construction industry in Romania is under pressure to modernize in order to cope with the new demands of development and convergence with EU. Contractual procedures in construction have to become an integral part in this process of modernization. The article makes an introduction to the advantages of standard forms of contract and professional contract administration in construction and presents the current state-of-the art in the use of standard construction contracts in Romania. Some practical conclusions and recommendations are presented considering the need for further contract studies.

  20. Nucleon form factors from 5D skyrmions

    Energy Technology Data Exchange (ETDEWEB)

    Panico, Giuliano [Bethe Center for Theoretical Physics and Physikalisches Institut der Universitaet Bonn, Nussallee 12, 53115 Bonn (Germany); Wulzer, Andrea [Institut de Theorie des Phenomenes Physiques, EPFL, CH-1015 Lausanne (Switzerland)], E-mail: andrea.wulzer@epfl.ch

    2009-06-15

    Several aspects of hadron physics are well described by a simple 5D effective field theory. Baryons arise in this scenario as 'large' (and therefore calculable) 5D skyrmions. We extend and refine the existing analysis of this 5D soliton, which is fairly non-trivial due to the need of numerical methods. We perform the complete quantization of those collective coordinates which are relevant for computing the static observables like the nucleon form factors. We compare the result with simple expectations about large-N{sub c} QCD and with the experimental data. An agreement within 30% is found.