WorldWideScience

Sample records for suspension del requerimiento

  1. Requerimientos para formular estrategias orientadas al mercado del sector hotelero

    Directory of Open Access Journals (Sweden)

    Rafael Hernández-León

    2016-12-01

    Full Text Available Las pequeñas y medianas empresas son eslabones fundamentales para que las economías de las naciones crezcan y se vuelvan competitivas. Un elemento clave en el rendimiento de las organizaciones es la implementación de estrategias para crear ventaja competitiva. El objetivo de este trabajo fue determinar los requerimientos para formular estrategias en orientación al mercado en los hoteles del estado de Sonora. La metodología consistió en aplicar una encuesta a los encargados de mercadotecnia de los hoteles, investigar el entorno y determinar los requerimientos por medio de un análisis de las principales interacciones de los elementos: fortalezas, oportunidades, debilidad y amenazas. El instrumento para recolectar los datos se validó por medio de un análisis factorial. Entre los principales hallazgos se encontró una baja capacitación del personal, poco uso de herramientas tecnológicas, y falta de comunicación interfuncional. Se concluye que es necesario realizar un seguimiento en los programas de capacitación, optimizar el uso de herramientas tecnológicas, y mejorar la vinculación de las empresas con las universidades y el gobierno. Finalmente, a diferencia de otros estudios encontrados en la literatura, los cuales se enfocan a determinar estrategias, en ésta investigación se obtuvieron los requerimientos para mejorar la orientación al mercado, y que cada empresa los utilice para formular sus propias estrategias.

  2. Estimación lineal de los requerimientos nutricionales del NRC para ganado de leche

    Directory of Open Access Journals (Sweden)

    Jorge Elizondo

    2002-01-01

    Full Text Available Se determinaron ecuaciones de regresión lineal para calcular en forma directa los requerimientos nutricionales del ganado de leche (TND, ED, EM, ENL, PC, Ca, P, Vitamina Ay Vitamina D en diferentes etapas fisiológicas: mantenimiento, gestación y producción del ganado de leche. Se utilizó como base la tabla de requerimientos nutricionales del NRC. En todas las ecuaciones se calculó el coeficiente de determinación para conocer el grado de ajuste.

  3. Aporte del agua de bebida a los requerimientos de calcio de la población costarricense

    OpenAIRE

    Darner Mora Alvarado; Nuria Alfaro Herrera; Carlos Felipe Portuquez

    2000-01-01

    Se presenta la primera investigación a nivel nacional, para determinar el aporte del agua de bebida a los requerimientos de calcio del costarricense, asumiendo una ingesta diaria de 2 litros de agua. Para calcular las concentraciones porcentuales de calcio iónico, se promediaron y agruparon por cantones los contenidos de Carbonato de Calcio (CACO3) de las fuentes de agua utilizadas por acueductos rurales, municipales y los administrados por Acueductos y Alcantarillados; además, como complemen...

  4. Requerimientos germinativos de enredaderas características del Chaco Serrano de Córdoba, Argentina

    Directory of Open Access Journals (Sweden)

    Anahí Belén D’Agostino

    2012-12-01

    Full Text Available Las enredaderas son elementos conspicuos de la flora de diferentes ecosistemas. Numerosos estudios basados en patrones de distribución y ecología de este grupo de plantas se han realizado a escala regional, se conoce poco sobre los factores que afectan su distribución a nivel local. Se estudiaron los requerimientos germinativos de 21 enredaderas del Bosque chaqueño serrano de Córdoba, las cuales fueron clasificadas en típicas de bosques, matorrales e indiferentes. Se llevaron a cabo experimentos de germinación en tres regímenes de temperatura (15-5ºC, 25-15ºC y 35-20ºC, en luz (12-12hr luz-oscuridad y oscuridad permanente. Se registró el porcentaje final de germinación, el índice de germinación relativa a la luz (GRL y la velocidad de germinación (T50. La temperatura fue el principal factor regulador del proceso germinativo. El GRL y el T50 no registraron diferencias entre fisonomías. Los patrones observados apoyan la idea de que la germinación de este grupo de plantas estaría respondiendo a factores macroclimáticos (estacionalidad del clima y las precipitaciones, más que a un microclima (factores asociados a la fisonomía del sitio. La composición diferencial de enredaderas en los parches de bosques y arbustos no estaría explicada por los factores estudiados, sino por características de las etapas posteriores a la semilla.

  5. La Ingeniería de Requerimientos en las Pequeñas Empresas del Departamento de Risaralda

    Directory of Open Access Journals (Sweden)

    Cristian Andrés De-La-Cruz-Londoño

    2014-06-01

    Full Text Available La finalidad de este artículo es mostrar el estado actual del proceso de ingeniería de requerimientos en las pequeñas empresas que desarrollan software en el departamento de Risaralda, además de observar cómo se aborda esta área desde la academia. Para lograr esto se estructuraron dos herramientas: encuesta y entrevista y una búsqueda teórica. Se optó por conocer la percepción de las personas relacionadas con esta área y las temáticas fueron Stakeholders, priorización, dependencias, trazabilidad, diseño centrado en usuario (DCU, restricciones, documentación, requerimientos funcionales, requerimientos no funcionales, meta-modelos y técnicas usadas para elicitación. Para el caso de la industria la media ponderada es de 4,1 (en una escala de 1 a 5 de lo que se concluye que las empresas se encuentran algo de acuerdo con su experticia para el desarrollo de la ingeniería de requerimientos.

  6. Determinación del requerimiento hídrico del pimentón en el municipio de Candelaria, departamento del Valle del Cauca

    Directory of Open Access Journals (Sweden)

    Estrada Salazar Edgar Iván

    2010-12-01

    Full Text Available Se realizó un ensayo con el fin de determinar el requerimiento hídrico del pimentón Capsicum annuum variedad Unapal-Serrano, en la zona de Candelaria-Valle del Cauca (Colombia. Se determinó que el pimentón requiere 425mm de agua durante su ciclo vegetativo, obteniendo una eficiencia del uso del agua de 5.32 kg/m3 de fruto fresco y de 0.5 kg/m3 en términos de materia seca. Además, se comprobó la eficiencia del microevaporímetro "MIEVHR" como herramienta para programación del riego y estudios hidrológicos.

  7. Aporte del agua de bebida a los requerimientos de magnesio de la población costarricense

    OpenAIRE

    Darner Mora Alvarado; Nuria Alfaro Herrera; Carlos Felipe Portuguez; José Pablo González

    2000-01-01

    Se presenta un estudio descriptivo en el ámbito nacional, para determinar la contribución del agua de bebida a los requerimientos de magnesio (Mg) en la dieta del costarricense, asumiendo una ingesta diaria de dos litros. Para calcular las concentraciones porcentuales de Mg iónico se promediaron y agruparon por cantones los contenidos de dureza de magnesio, expresada como carbonato de magnesio (MgCO3), de las fuentes de agua utilizadas para los acueductos rurales, municipales y los administra...

  8. Un modelo para la solución de requerimientos no alineados: El caso del Software lúdico para la divulgación

    Directory of Open Access Journals (Sweden)

    Héctor G. Pérez-González

    2015-12-01

    Full Text Available Este artículo propone lineamientos metodológicos para ser aplicados en el proceso de requerimientos cuando estos se presentan como “No alineados”. Se considera que esta situación se da cuando los objetivos del propietario del software son distintos a los del usuario del mismo. Como caso de estudio se utiliza el desarrollo de software lúdico (también conocido como juegos digitales, videojuegos, o juegos serios con fines de divulgación. Esto involucra generalmente un conjunto de stakeholders más heterogéneo que el del software convencional. Adicionalmente, si el software se utiliza con objetivos de divulgación de ciencia, tecnología o innovación se agrega la complicación de la presencia de objetivos no alineados ya que el usuario final puede ignorar el objetivo real del software que utilizará. Consecuentemente el análisis de requerimientos cobra una importancia crucial. La literatura presenta propuestas para adaptar el proceso completo de software con objetivos educativos, sin poner atención al proceso de requerimientos ni a los objetivos de divulgación. Esta propuesta puede ser extrapolada a cualquier proceso de Ingeniería de requerimientos de Software donde se involucren requerimientos no alineados.

  9. PROCEDIMIENTO PARA LA OBTENCIÓN DE REQUERIMIENTOS FUNCIONALES A PARTIR DEL ANÁLISIS DE PROCESOS DE NEGOCIO

    Directory of Open Access Journals (Sweden)

    Joan Jaime Puldón

    2009-02-01

    Full Text Available

    Los lenguajes de modelado de procesos llevan décadas utilizándose en numerosos campos de la industria. El uso de estas técnicas es relativamente reciente dentro de la Ingeniería de Software. En este artículo se describe un procedimiento estándar de obtención requerimientos funcionales para el desarrollo de Sistemas de Gestión, basado en la aplicación de la gestión de procesos de negocio (BPM en su primera etapa, el análisis de procesos (BPA. Mediante la utilización del procedimiento, se obtuvieron los requerimientos a automatizar del Sistema de Gestión de Información de un hotel capitalino y se comparan con los obtenidos aplicando otros métodos de la ingeniería de software.

  10. Determinación del requerimiento de frío y de calor en duraznero [Prunus persica (L. Batsch.] mediante un modelo de correlación

    Directory of Open Access Journals (Sweden)

    CHAAR, J

    2012-11-01

    Full Text Available Los árboles frutales de hoja no persistente poseen un período de reposo entre los ciclos vegetativos. Para salir de reposo invernal, las yemas deben acumular primero frío (endodormancia y luego calor (ecodormancia.El objetivo de este trabajo fue determinar el requerimiento de frío y de calor en cinco cultivares de duraznero mediante un método de correlación, con datos de fecha de plena floración y temperatura del aire de siete años, en el este de Mendoza. El requerimiento de frío varió entre 914 y 1262 unidades de frío, mientras que el de calor fluctuó entre 2177 y 6490 horas grado de crecimiento. Excepto en cv. “Prima”, la variabilidad entre años del requerimiento de frío (coeficiente de variación, CV: 18,3 a 18,9% fue mayor que la correspondiente al requerimiento de calor, (CV: 6,9 a 13,9%. Los requerimientos de calor disminuyeron en años de mayor acumulación de frío e indicaron una compensación. El modelo utilizado, permite disponer de información más precisa sobre los requerimientos térmicos de los cultivares, y así poder realizar una zonificación que racionaliceel cultivo y maximice su aprovechamiento, en las áreas agroclimáticamente adecuadas.

  11. Variabilidad de suelos y requerimiento hídrico del cultivo de banano en una localidad del Pacífico de México

    Directory of Open Access Journals (Sweden)

    M. Cigales

    2011-01-01

    Full Text Available Con el objetivo de mejorar las estrategias de uso del agua de riego para el cultivo de banano (Musa aaa cv. Gran Enano en la localidad de El Colomo, Colima, México, se realizó tanto la caracterización in situ de los suelos como la identificación de los mismos, así como la estimación de la influencia de los factores climáticos y del suelo en los requerimientos hídricos de este cultivo; ello, mediante la utilización del programa de cómputo CropWat (versión 2002. Los resultados mostraron que los suelos presentan, en general, condiciones favorables para el cultivo de banano, sin embargo, es necesario considerar la variabilidad de las características físicas y químicas en la estimación de los requerimientos hídricos. Asimismo, se sugiere obtener de manera periódica y continua la información detallada de clima para generar estrategias de riego que fortalezcan la producción sostenible de banano en esta región.

  12. Nuevo enfoque para la enseñanza del paradigma MDD: ingeniería de requerimientos basada en modelos apoyada por tecnologías CASE

    Directory of Open Access Journals (Sweden)

    Nahuel, Leopoldo

    2016-06-01

    Full Text Available El Desarrollo Dirigido por Modelos (MDD, Model Driven Development es hoy un paradigma innovador y pujante de la Ingeniería de Software, su proceso radica en la construcción y transformación de modelos con distintos niveles de abstracción. Por su parte, las actividades y productos de la Ingeniería de Requerimientos son un eslabón fundamental para las distintas disciplinas de trabajo de la Ingeniería de Software. Más precisamente la Ingeniería de Requerimientos Basada en Modelos (IRBM, apunta a la conceptualización y especificación de los requerimientos a través de múltiples modelos gráficos y/o textuales. Tanto la IRBM como MDD, requieren soporte de tecnologías CASE (Computer Aided Software Engineering para construir distintas vistas de modelos y establecer conexión entre ellos conocida como trazabilidad de modelos. Este trabajo expone los beneficios de enseñar IRBM como parte de la ejecución de las etapas iniciales del paradigma MDD, apuntando hacia identificación y conceptualización de requerimientos a través de múltiples modelos. Esta integración metodológica-tecnológica entre las bases de MDD con técnicas de IRBM y el apoyo de herramientas CASE, permite explotar de manera práctica el autoaprendizaje de conceptos teóricos comúnmente impartidos en asignaturas de Ingeniería de Software: escalabilidad y trazabilidad de modelos, evaluación de impactos a partir de cambios de requerimientos, refinamiento de modelos funcionales en modelos de diseño y estimaciones de proyectos a partir de modelos funcionales.

  13. Determinación del requerimiento hídrico del pimentón en el municipio de Candelaria, departamento del Valle del Cauca Water requeriments of pepper in Candelaria, Valle del Cauca, Colombia

    Directory of Open Access Journals (Sweden)

    Adriana Gómez Enríquez

    2010-10-01

    Full Text Available Se realizó un ensayo con el fin de determinar el requerimiento hídrico del pimentón Capsicum annuum variedad Unapal-Serrano, en la zona de Candelaria-Valle del Cauca (Colombia. Se determinó que el pimentón requiere 425mm de agua durante su ciclo vegetativo, obteniendo una eficiencia del uso del agua de 5.32 kg/m³ de fruto fresco y de 0.5 kg/m³ en términos de materia seca. Además, se comprobó la eficiencia del microevaporímetro 'MIEVHR' como herramienta para programación del riego y estudios hidrológicos.A trial was carried out in order to determining the water requirement of the pepper Capsicum annuum variety UNAPAL- Serrano in the zone of Candelaria -Valley of the Cauca (Colombia and to evaluate the efficiency of the microevaporímeter 'MIEVHR' as estimator of the evaporation. It was determined that the pepper requires 425mm of water during the cycle vegetative obtaining an efficiency of the use of the water of 5.32 Kg/m³ of fresh fruit and 0.5 kg/m³ in terms of dry matter. Besides, it was verified the microevaporímeter efficiency 'MIEVHR' as tool for programming of the irrigation.

  14. Requerimientos sectoriales de energía eléctrica en México. Una aplicación del concepto de entropía de Theil al análisis insumo-producto

    OpenAIRE

    Gastélum Valdez, Martha Janet

    2009-01-01

    La investigación estima los requerimientos sectoriales de energía eléctrica en México. Se utilizan tres metodologías: 1) la que calcula los requerimientos de energía primaria a través de los balances energéticos; 2) las necesidades de energía eléctrica obtenido del modelo insumo-producto y 3) el uso del índice de Theil y una medida de concentración con vínculos hacia delante y hacia atrás que mide el grado de inter-conectividad. Los altos valores de las entropías confirman que la importancia ...

  15. Las guías de valoración de los requerimientos laborales en la Incapacidad Laboral: la Guía de Valoración Profesional del INSS, el mercal y la Guía Mejorada del Instituto de Biomecánica de Valencia

    Directory of Open Access Journals (Sweden)

    Manuel García Herrera

    2014-01-01

    Full Text Available Se hace un análisis comparativo de las guías de valoración de requerimientos laborales: la Guía de Valoración Profesional del INSS, el MERCAL y la Guía mejorada del Instituto de Biomecánica de Valencia, se destacan los defectos y virtudes de cada una de ellas, sus puntos fuertes y sus puntos débiles, y se apuesta hacia la convergencia de todas ellas en una misma herramienta unificada.

  16. La construcción del conocimiento profesional en psicología : demandas sociales y formación universitaria. Curriculum y cognición : perspectivas en la formación del psicólogo de cara a los nuevos requerimientos académicos, profesionales y socio culturales

    OpenAIRE

    Garau, Andrea Julia

    2011-01-01

    Estudiar el proceso de formación profesional conlleva la consideración del contexto socio cultural en el que se desarrolla, su multidimensionalidad y sus aristas problematizantes, así como el impacto que estos requerimientos ejercen sobre los programas formativos que imparte la Universidad. La Psicología constituye un campo disciplinar y profesional que detenta especificidades conforme su desarrollo histórico y su particular proceso de consolidación en el país. El relevamiento de demandas soc...

  17. Caracterización del proceso y herramientas metodológicas de la ingeniería de requerimientos para aplicaciones de sistemas de información geográfica

    Directory of Open Access Journals (Sweden)

    Luis Fernando Medina Cardonal

    2007-01-01

    Full Text Available Este artículo describe el proceso de la ingeniería de requerimientos y las herramientas metodológicas usadas en aplicaciones de sistemas de información geográfica (SIG ante la ausencia de una alternativa integral y consistente específica para este dominio. Para ello, por un lado, se introduce la problemática de la ingeniería de requerimientos en aplicaciones SIG, se exhiben los tipos de requerimientos, actores involucrados y aspectos comunicativos relevantes en el proceso de requerimientos y se clasifican las metodologías existentes en lenguajes de modelamiento y especificación. Adicionalmente, se presentan los estándares geomáticos como un elemento transversal a tener en cuenta en las aplicaciones SIG.

  18. DISEÑO DEL SISTEMA DE CONTROL DE CALIDAD DE LOS DIAGNOSTICADORES CENTIS EN FUNCIÓN DE LOS REQUERIMIENTOS DE LOS CLIENTES

    Directory of Open Access Journals (Sweden)

    Pavel Melo Cala

    2003-12-01

    Full Text Available

    Las empresas de hoy en día deben preocuparse por la satisfacción plena de las necesidades y expectativas de los clientes para lograr su fidelidad y ampliar la cuota de mercado sobre la base de la satisfacción de este. En un análisis de la satisfacción de los clientes con los diagnosticadores del CENTIS se determinó que. existían algunas insatisfacciones cuyas causas fundamentales eran las deficiencias en el sistema de control de la calidad (SCC y la falta de un adecuado diseño del servicio. Además, el costo actual de inspección es elevado. De ahí que el objetivo del presente trabajo consista en diseñar un SCC orientado a la satisfacción de los requisitos de los clientes en aras de reducir en un 50 % las quejas presentadas por los cliente externos, aumentar la satisfacción del personal y reducir los costos de inspección al mínimo posible.

  19. Requerimientos germinativos de enredaderas características del Chaco Serrano de Córdoba, Argentina Germinating requirements of common vines from Chaco Serrano of Córdoba, Argentina

    Directory of Open Access Journals (Sweden)

    Anahí Belén D’Agostino

    2012-12-01

    Full Text Available Las enredaderas son elementos conspicuos de la flora de diferentes ecosistemas. Numerosos estudios basados en patrones de distribución y ecología de este grupo de plantas se han realizado a escala regional, se conoce poco sobre los factores que afectan su distribución a nivel local. Se estudiaron los requerimientos germinativos de 21 enredaderas del Bosque chaqueño serrano de Córdoba, las cuales fueron clasificadas en típicas de bosques, matorrales e indiferentes. Se llevaron a cabo experimentos de germinación en tres regímenes de temperatura (15-5ºC, 25-15ºC y 35-20ºC, en luz (12-12hr luz-oscuridad y oscuridad permanente. Se registró el porcentaje final de germinación, el índice de germinación relativa a la luz (GRL y la velocidad de germinación (T50. La temperatura fue el principal factor regulador del proceso germinativo. El GRL y el T50 no registraron diferencias entre fisonomías. Los patrones observados apoyan la idea de que la germinación de este grupo de plantas estaría respondiendo a factores macroclimáticos (estacionalidad del clima y las precipitaciones, más que a un microclima (factores asociados a la fisonomía del sitio. La composición diferencial de enredaderas en los parches de bosques y arbustos no estaría explicada por los factores estudiados, sino por características de las etapas posteriores a la semilla.Vines are conspicuous elements of floras in different ecosystems. Patterns of distribution and ecology of this group has been studied at regional scales, mainly in tropical areas, but less is known about factors affecting their distribution at smaller scales. In this study, the germinating requirements of common vines from two plant communities (open shrubland and woodland in xerophytic mountain forests (Chaco serrano were studied. A total of 21 species were selected and classified as typical of woodland, shrubland, or indifferent. Experimental treatments were three temperature regimes (15-5ºC, 25-15º

  20. REQUERIMIENTOS DE ENERGÍA PARA TERNERAS DE LECHERÍA

    OpenAIRE

    Jorge Alberto Elizondo-Salazar

    2013-01-01

    El objetivo del presente trabajo fue presentar los requerimientos nutricionales de energía para terneras de lechería a partir de la publicación del National Research Council (2001): Requerimientos Nutricionales para Ganado de Leche, durante el año 2012 en la Estación Experimental Alfredo Volio Mata, con el fin de hacer esta información más accesible a usuarios potenciales de Costa Rica y América Latina. La ternera siempre ha requerido cuidado y atención especial para que pueda sobrevivir desd...

  1. REQUERIMIENTOS DE ENERGÍA PARA TERNERAS DE LECHERÍA

    Directory of Open Access Journals (Sweden)

    Jorge Alberto Elizondo-Salazar

    2013-01-01

    Full Text Available El objetivo del presente trabajo fue presentar los requerimientos nutricionales de energía para terneras de lechería a partir de la publicación del National Research Council (2001: Requerimientos Nutricionales para Ganado de Leche, durante el año 2012 en la Estación Experimental Alfredo Volio Mata, con el fin de hacer esta información más accesible a usuarios potenciales de Costa Rica y América Latina. La ternera siempre ha requerido cuidado y atención especial para que pueda sobrevivir desde el nacimiento al destete y más allá. Desde el punto de vista nutricional, establecer los requerimientos energéticos de la ternera puede ayudar a los productores a proveer dietas que llenen las demandas para un óptimo desarrollo y buena salud.

  2. Gestión de preferencias de requerimientos basada en técnicas cognitivas

    OpenAIRE

    Martínez Carod, Nadina; Cechich, Alejandra

    2007-01-01

    La definición de requerimientos de software depende en gran parte de la identificación, especificación, construcción y análisis de objetivos. Los objetivos capturan las metas y necesidades del sistema bajo consideración. Los métodos de análisis orientados por objetivos se basan en la descomposición y el refinamiento de objetivos. Parten de necesidades y deseos de clientes hasta la obtención de los requerimientos de software. En general resultan en grafos de objetivos AND-OR donde cada nodo es...

  3. Segunda parte: los nuevos requerimientos

    Directory of Open Access Journals (Sweden)

    Mario de Agüero Aguirre

    2001-01-01

    Full Text Available A la luz de los cambios que se han venido dando en el ámbito de la economía mediante un proceso acelerado de globalización y apertura de los mercados se han generado presiones para que se actualicen y fortalezcan los programas de formación de administradores y contadores. Razones por las que se propone una revisión de los programas actuales en licenciatura a fin de lograr que los egresados de las escuelas de administración tengan un acervo de conocimientos más amplio y sólido creándose de tal manera una licenciatura única y, con ello, el que los conocimientos especializados de algunas de las disciplinas relacionadas con el vasto universo del conocimiento de la actividad económica de las organizaciones sea proporcionado mediante estudios de posgrado. Lo que aquí se sugiere debe ser considerado como una propuesta seminal que puede ser la base de un estudio amplio partiendo, por supuesto, de un debate en el claustro universitario sobre las ideas aquí propuestas

  4. Water flow requirements related to oxygen consumption in juveniles of Oplegnathus insignis Requerimientos de flujo de agua en función del consumo de oxígeno en juveniles de Oplegnathus insignis

    Directory of Open Access Journals (Sweden)

    Elio Segovia

    2012-09-01

    Full Text Available In this study the oxygen consumption rate in four groups of Oplegnathus insignis was examined under three different water temperatures 13, 18 and 23°C. Average weight of each group of fish was 9.5, 198, 333 and 525 g respectively. Oxygen consumption was measured in a respirometer of 18.8 L capacity and results show that at the same water temperature occurs an inverse relationship between body weight and oxygen consumption whereas for same body weight (W in kg the respiration rate varies proportionally with temperature rise (T in °C. The generalized equation of oxygen consumption (Ro in routine metabolism was determined as: Ro (mg O2 kg-1 h-1 = [85.229 + (10.03 T]-(221.344 W. The information it is analized with regard to establishing quantitative relationships that allow a more precise specification of the water flow requirements and renewal rates in open flow systems without oxygenation, considering aspects such as body weight, respiratory rate, temperature and stocking density.Se determinó la tasa de consumo de oxígeno de Oplegnathus insignis en cuatro grupos de peces bajo tres temperaturas diferentes: 13, 18 y 23°C. El peso promedio de cada grupo de peces fue de 9,5, 198, 333 y 523 g respectivamente. El consumo de oxígeno se determinó en un respirómetro de 18,8 L de capacidad y los resultados muestran que a una misma temperatura ocurre una relación inversa entre el peso corporal (W en kg y el consumo de oxígeno, mientras que para un mismo peso corporal la tasa respiratoria varía proporcionalmente con el ascenso de temperatura (T en °C. La ecuación generalizada que representa el consumo de oxígeno (Ro en metabolismo de rutina se determinó como: Ro (mg O2 kg-1 h-1 = [85.229 + (10.03 T]-(221.344 W. Se analizó la información en relación a establecer las relaciones cuantitativas que permitan una especificación más exacta de los requerimientos de flujo de agua y tasas de renovación en sistemas de flujo abierto y sin oxigenaci

  5. Valoración de la aptitud de los requerimientos profesionales. Capacidades requeridas para el trabajo o grupos profesionales: algunas aportaciones del Instituto Nacional de Seguridad e Higiene en el Trabajo (INSHT

    Directory of Open Access Journals (Sweden)

    Marta Zimmerman Verdejo

    2014-01-01

    Full Text Available Siendo la "aptitud para trabajar" como aquella capacidad psicofísica del individuo para realizar su trabajo sin riesgo para su propia salud o la de otros, el presente artículo resume algunas actividades desarrolladas por el INSHT, en el marco de sus competencias técnica, en colaboración con otras unidades del Ministerio de Empleo y Seguridad Social.

  6. Requerimientos tecnológicos del transportador de laterita hacia el molino de bolas, de la Empresa Productora de Níquel Comandante Ernesto Guevara; Technological Requirements of the Conveyor Belt which Carries Laterite to the Balls Mill in Nickel Producer

    Directory of Open Access Journals (Sweden)

    Javier Muñoz Álvarez

    2011-02-01

    Full Text Available Se describe el flujo productivo existente en la Empresa Productora del Níquel Comandante Ernesto Guevara,hasta la etapa de la molienda seca, con énfasis en los detalles técnicos de mayor relevancia en el proceso.Se analiza la influencia de la cantidad de mineral en el sistema sobre el comportamiento energético de lamolienda. Finalmente se determinan los requerimientos tecnológicos impuestos por el transportador delaterita 215 - TR - 201 al accionamiento eléctrico, en función de las características y las necesidades delproceso. In the paper, the productive flow existing in the nickel producer enterprise Commandant Ernesto Guevarawas described until the stage of dry milling, with an emphasis on the technical details of greater relevancy inthe process. There was analyzed the influence of the amount of mineral in the system over the energyconsumption performance of the milling. Finally it were identified the technological requirements imposed bythe 215 - TR - 201 laterite carrier to the electric drive, according to the characteristics and needs of theprocess.

  7. Levantamiento de requerimientos basados en el conocimiento del proceso

    Directory of Open Access Journals (Sweden)

    Henry León Pérez Virgen

    2012-12-01

    Full Text Available This paper presents research results of the project entitled methods for requirements elicitation based on process knowledge, and enhanced by Colciencias the Technological University of Pereira, in it describes the traditional methods of requirements elicitation and they may not be as optimal as methods based on knowledge of the process.

  8. Requerimientos informacionales para la toma de decisiones estratégicas en organizaciones de información

    Directory of Open Access Journals (Sweden)

    Yunier RODRÍGUEZ-CRUZ

    Full Text Available Resumen Se examina el carácter informacional del proceso de toma de decisiones estratégicas con el propósito de identificar los requerimientos informacionales que condicionan el uso de información que se realiza en los niveles estratégicos en instituciones de información. El acercamiento teórico al tema permite comprender las particularidades en relación a la información como recurso estratégico y determinar aquellos factores y elementos que desde las Ciencias de la Información han contribuido a la teoría de las decisiones organizacionales. El estudio se realizó con directivos de once instituciones cubanas. Se profundiza, a partir del método fenomenográfico, en la opinión de los entrevistados acerca de los recursos, procesos, sistemas, factores y estados emocionales vinculados a la información y su uso en la toma de decisiones. Como resultado se identifica un conjunto de requerimientos informacionales, entre los que destacan los sistemas de información, procesos informacionales y gerenciales, así como un conjunto de recursos informacionales y factores socio-cognitivos que posibilitan fomentar y generar una infraestructura informacional y potenciar la cultura informacional necesaria para el desarrollo de procesos de decisión eficaces a nivel estratégico.

  9. EVALUACIÓN DE REQUERIMIENTOS NUTRICIONALES EN VIVERO DE ESPECIES TROPICALES EMPLEADAS EN SILVICULTURA URBANA

    Directory of Open Access Journals (Sweden)

    David Andrés Herrera Ramírez

    Full Text Available La fertilización es determinante del crecimiento y desarrollo de árboles urbanos. Por ello, estudiamos, mediante la técnica del elemento faltante, los requerimientos nutricionales de cinco especies tropicales usadas en silvicultura urbana (Tabebuia chrysantha, Margaritaria nobilis, Hamelia patens, Apeiba aspera, Cupania americana. Se encontró algunas especies sensibles a la deficiencia de nitrógeno y otras a la deficiencia de azufre. El grupo de T. chrysanta, M. nobilis y H. patens mostró alta sensibilidad a la deficiencia de nitrógeno, mientras que C. americana y A. aspera presentaron sensibilidad a la deficiencia de azufre, representada en menor crecimiento promedio para todas las variables evaluadas: altura, diámetro en el cuello de la raíz, materia seca radical y materia seca aérea. Las representaciones HJ-Biplot, utilizadas para caracterizar la respuesta por especie a cada tratamiento en todas las unidades experimentales, evidenciaron los bajos rendimientos en crecimiento para las deficiencias en nitrógeno y azufre. El desbalance de bases calcio/magnesio y magnesio/potasio afectó el crecimiento en altura de todas las especies, evidenciado en los altos crecimientos obtenidos para los tratamientos deficientes en calcio y magnesio. Debido a esto, las fórmulas nutricionales utilizadas en vivero deben reajustarse a las exigencias individuales de las especies, para producir mejores árboles para la ciudad.

  10. Especificación de Requerimientos para el Desarrollo de Software Automotriz en México

    Directory of Open Access Journals (Sweden)

    Jorge R. Aguilar Cisneros

    2015-12-01

    Full Text Available Actualmente, dentro del sector automotriz, México es reconocido a nivel mundial, como un excelente país ensamblador, sin embargo, países como Alemania, Estados Unidos y Japón, entre otros, son reconocidos mundialmente además de ensambladores como países innovadores de éste sector. Bajo este escenario, se propone que México incursione en la investigación e innovación automotriz, particularmente, en el área de desarrollo de sistemas de software automotriz embebido tanto críticos como no críticos. Para llevar a cabo esta propuesta, en este artículo se presenta la situación del desarrollo de software automotriz en México, así como una revisión de los principales modelos de ciclo de vida, estándares y herramientas utilizadas en la construcción de sistemas de software automotriz embebido. De manera particular, presentamos la especificación de requerimientos para el sector automotriz, como un área inicial de atención.

  11. Requerimientos laborales para Ciencias Sociales: Una mirada a sociología y trabajo social

    Directory of Open Access Journals (Sweden)

    Sandra Iturrieta-Olivares

    2014-01-01

    Full Text Available El artículo tiene como finalidad describir algunos de los requerimientos del mercado laboral chileno para las profesiones de las ciencias sociales, en particular para la sociología y el trabajo social. En el entendido que las profesiones son dinámicas, interactúan entre ellas y se influyen mutuamente, intentando mantener sus jurisdicciones laborales y agregar otras nuevas, se desarrolló una investigación empírica, enmarcada en el paradigma explicativo con enfoque cuanti-cualitativo, para conocer las actuales tendencias sobre la superposición de los límites profesionales entre tales profesiones. De manera que, luego de revisar avisos de ofertas laborales, y hacer encuestas a empleadores, sociólogos y trabajadores sociales en ejercicio, además de entrevistar a estos últimos, es posible concluir que ambas profesiones confluyen en el campo de la intervención social directa, compartiendo requisitos referidos al tiempo y tipo de experiencia; al nivel de estudios; y los conocimientos exigidos por el mercado laboral. A partir de esta realidad se insta a las instituciones de educación superior del país y a los órganos del Estado chileno competentes en esta materia, a regular la oferta formativa para trabajadores sociales, y a definir de modo perentorio, concreto y exhaustivo, los campos laborales, áreas de desempeño y perfiles profesionales de cada una de estas carreras, ello con el afán de tener profesionales que se sientan retribuidos e integrados y de la necesaria cohesión social del país.

  12. Elicitación y especificación de requerimientos no funcionales en aplicaciones web

    OpenAIRE

    Rojo, Silvana del Valle

    2013-01-01

    Este trabajo de tesis presenta lineamientos específicos para la aplicación de Ingeniería de Requerimientos Web al tratamiento de los RNF. Presenta procesos de Elicitación y Especificación de RNF Web y ofrece las plantillas diseñadas particularmente para la captura y especificación de los RNF en los procesos definidos. Si bien actualmente la Ingeniería de Requerimientos proporciona numerosas técnicas y herramientas para identificar, describir, validar y gestionar requerimientos, esto...

  13. Requerimientos de Energía en Operaciones de Labranza con Implementos de Discos

    Directory of Open Access Journals (Sweden)

    Rincón C. Carlos J.

    1985-12-01

    Full Text Available Este trabajo trata de establecer lo siguiente: Determinar los requerimientos de fuerza de tiro y potencia en operaciones de arado y desterronamiento con implementos de discos. Establecer los rangos de humedad del suelo y velocidad de aplicación del implemento para suelos de diferentes texturas con el fin de obtener un nuevo aprovechamiento de la fuente de potencia. Con base en los datos de campo, establecer mediante modelos matemáticos las relaciones existentes entre la fuerza de tiro y su respectiva potencia con los parámetros de humedad del suelo y velocidad de operación del implemento. A pesar del uso intensivo de estos equipos en operaciones de labranza, aún no se han hecho estudios a nivel nacional del comportamiento de los mismos para las diferentes condiciones de suelos en épocas de preparación. En términos generales se encontró que en la arada, para suelos de textura fina (pesados hay una tendencia más pronunciada al incremento en la fuerza de tiro a medida que aumenta la humedad del suelo, que en los suelos moderadamente pesados y en los livianos. En el caso de los rastrillos las diferencias en el comportamiento son menos pronunciadas. Con el objeto de obtener una relación matemática entre las variables se analizaron varios modelos matemáticos de los cuales el que presentó un mayor ajuste fue: Ln F= b0 + b1 Lm V donde: F= Fuerza de tiro por unidad de ancho (KN /m V= Velocidad de operación (mI S b0 y b1 = Coeficientes de regresión. La relación correspondiente para potencia requerida en las operaciones de la labranza fue: Lm P = b2 + b3 L m V. donde: P = Potencia por unidad de ancho (KW/m. Para la resistencia unitaria al corte en el caso de los arados la relación correspondiente fue: Lm R = b4 + b5 Lm V donde: R= Resistencia unitaria al corte (KN/m 2 .

  14. Requerimiento Hídrico de Gmelina arborea en Etapa de Vivero Bajo Condiciones Controladas

    Directory of Open Access Journals (Sweden)

    Amir Vergara

    2017-04-01

    Full Text Available RESUMEN Con el fin de conocer el requerimiento hídrico de Melina en la etapa de vivero, se realizó un ensayo con cuatro coeficientes de consumo (Kc: 0,6, 0,8, 1,2, 1,4. Estos tratamientos se transformaron en láminas de riego de 2,4 mm.día–1, 3,2 mm.día–1, 4,8 mm.día–1 y 5,6 mm.día–1 respectivamente, debido a que la evapotranspiración de referencia (ETO de la zona fue de 4 mm.día–1. Se observó que a medida que se aumentaba la lámina de riego, disminuía el crecimiento de las plantas. Los valores más altos de altura de planta, área foliar, masa seca de hoja, masa seca del tallo y masa seca de raíz se obtuvieron con la lámina de 2,4 mm.día–1. Por otro lado, los índices de crecimiento (TAC, TRC, AFE, RAF muestran la misma tendencia. Con base en estos resultados se determinó que el Kc para esta especie en la etapa de vivero es de 0,6.

  15. GESTIÓN DE REQUERIMIENTOS PARA LA PROGRAMACIÓN A DISTANCIA

    Directory of Open Access Journals (Sweden)

    Yaquelín González Padilla

    2002-05-01

    Full Text Available

    En el trabajo se propone un conjunto de plantillas en forma de cuestionarios que permiten definir los requerimientos por los clientes de manera estandarizada. Se incluye un método de trabajo que se basa en la definición jerárquica de los requerimientos funcionales. Para la realización de la gestión de los requerimientos se propone una herramienta de software que permita el control de los cambios y facilite generar documentos para lograr el objetivo fundamental de la gestión de requerimientos: el acuerdo con los clientes. Se incluye en la herramienta la utilización de los casos de uso y de los diagramas de actividad, ambos artefactos de UML.

  16. Requerimiento hídrico de la berenjena Solanum melongena L. bajo

    Directory of Open Access Journals (Sweden)

    Sánchez V. Carlos

    2004-12-01

    Full Text Available

    El objetivo del presente trabajo fue determinar los requerimientos hídricos de dos genotipos de berenjena Solanum melongena L. bajo riego por goteo en el valle del Sinú medio, en época seca. El estudio se hizo en el Centro de Investigación Turipaná, de Corpoica, ubicado en Cereté, Córdoba, en un suelo clasificado como eutropet. Se utilizó un diseño de bloques al azar con un arreglo factorial de parcelas divididas, con dos genotipos de berenjena (Morada y Lila gris bajo cinco dosis de riego 1, 2, 4, 6 y 8 l∙planta -1∙día-1. Los resultados  demostraron que los genotipos de berenjena morada y lila gris se comportaron similarmente, sin presentar diferencias significativas. Hubo diferencias altamente significativas en las variables altura de planta, diámetro del tallo y rendimiento. El tratamiento de riego de 8 l∙planta

  17. Taquicardias supraventriculares. Estado del arte

    Directory of Open Access Journals (Sweden)

    Jairo Alfonso Gándara Ricardo

    2016-01-01

    El tratamiento de las taquicardias supraventriculares dependerá del estado hemodinámico del paciente, el cual definirá el requerimiento de terapia eléctrica o tratamiento médico. Se debe hacer una selección adecuada de los pacientes que requieren estudio electrofisiológico y ablación.

  18. Estudio de las instalaciones eléctricas bajo la influencia de las descargas atmosféricas y la selección, forma y requerimientos de la aplicación del pararrayos para la aplicación de instalaciones

    OpenAIRE

    Gonzalez Gonzalez, Rusbel A.; Minchala Valencia, Henry A.; Gallo Galarza, Juan

    2009-01-01

    El fenómeno de las descargas atmosféricas ha sido a la largo de los años una molestia de grandes magnitudes respecto a las consecuencias que se encuentran asociadas al impacto de las mismas, ya sea para las instalaciones eléctricas en casi todas las industrias como para las personas que laboran allí. El objetivo del presente estudio tiene como finalidad conocer más a profundo sobre los parámetros y peligros que se pueden presentar debido a impactos directos o cercanos a las instalaciones o...

  19. Requerimientos para la práctica profesional del arquitecto en Europa, como marco condicionante sobre la responsabilidad civil arquitectónica = Requirements for the professional practice of the architect in Europe, as a conditional framework for architectural civil responsibility

    Directory of Open Access Journals (Sweden)

    Victor Herrera

    2017-12-01

    Full Text Available El ejercicio profesional de la arquitectura, conlleva por su naturaleza, algunas consecuencias importantes como son las cargas de responsabilidad, siendo además la Civil, una de las más importante. En general en Europa, existe una gran heterogeneidad tratándose del que hacer de un arquitecto, ya que varía desde una visión netamente artística, hasta una más técnica y constructiva, representando distintos conceptos profesionales bajo una denominación común a lo largo del continente. Esto conlleva a que existan distintos tipos de profesionales ya que reciben distintos tipos de formación, el que finalmente no deja que todos puedan asumir los mismos tipos de responsabilidad. Igual situación se observa en relación a los seguros de responsabilidad civil que contratan estos profesionales, los que tienen una gran variación en cuanto a sus características. Estos problemas aun no tienen normativas concretas que la regulen, por lo que es una situación de gran importancia para la sociedad comunitaria. Por todo esto, es que en este análisis se estudiarán varios conceptos relacionados a la realidad sobre el título y la función del arquitecto en Europa. Abstract The professional practice of architecture, involves by its nature, some important consequences such as liability burdens, being also the Civil, one of the most important. In general in Europe, there is a great heterogeneity dealing with what to do as an architect, since it varies from a purely artistic vision, to a more technical and constructive one, representing different professional concepts under a common denomination throughout the continent. This leads to the existence of different types of professionals since they receive different types of training, which ultimately does not allow everyone to assume the same types of responsibility. The same situation is observed in relation to the civil liability insurances contracted by these professionals, which have a great variation in

  20. Requerimientos hídricos de la zanahoria (D. carota L. durante tres etapas de su desarrollo

    Directory of Open Access Journals (Sweden)

    Fabio Emilio Forero-Ulloa

    2015-07-01

    Full Text Available La zanahoria (D. carota L. es uno de los principales productos del departamento de Boyacá, participa con 1093 ha, especialmente en los municipios de Ventaquemada, Samacá y Tunja. Los híbridos Chantenay tienen en Ventaquemada un rendimiento promedio de 20 t.ha-1, que es bajo comparado con el de la Sabana de Bogotá, de 28.1t.ha-1; las limitantes en la producción de la zona son: falta de riego, semillas de altas exigencias agronómicas (adecuada mecanización del suelo, fertilización apropiada… y presencia de patógenos y arvenses. Con el objetivo de buscar los requerimientos hídricos del cultivo de zanahoria en tres fases fenológicas (crecimiento, elongación y madurez del órgano cosechable, el estudio se desarrolló en el segundo semestre de 2014, en Ventaquemada, vereda Bojirque; la evaluación de las fases se realizó bajo un diseño de muestreo estratificado con muestreos destructivos efectuados cada 30 días a partir de la siembra. El valor del coeficiente de cultivo (Kc se determinó a través de la metodología propuesta por la FAO. Se instalaron dos lisímetros de 1 m3 de capacidad, con el fin de establecer el consumo hídrico del cultivo. La evapotranspiración del cultivo de referencia (ETo fue obtenida con los datos climáticos tomados por la estación meteorológica inalámbrica Ambient Tiempo WS-2080 instalada en el sitio, los cuales se analizaron a través de la ecuación de Penman-Monteith, con el apoyo del software Cropwat. El Kc para cada etapa fenológica fue: fase crecimiento, 0.14; fase elongación, 0.29, y fase madurez órgano cosechable, 0.55.

  1. El envejecimiento de la población y sus efectos en los requerimientos de equipamiento urbano de educación básica en Aguascalientes, México

    Directory of Open Access Journals (Sweden)

    Óscar Luis Narváez Montoya

    2012-01-01

    Full Text Available En el presente trabajo se describe la tendencia de los efectos del envejecimiento demográfico sobre los requerimientos de equipamiento urbano en el contexto específico de la ciudad de Aguascalientes, México, para el año 2030. De manera particular se aborda el equipamiento urbano de la educación básica: jardines de niños, escuelas primarias y secundarias. En cuanto a los alcances y límites del estudio, los primeros tienen que ver con la demostración de los efectos del envejecimiento demográfico en las futuras necesidades de soportes materiales del subsistema de educación básica; y los segundos, con que el trabajo no trata sobre el efecto útil de estos soportes materiales en el servicio de la educación básica. La metodología se basa en la conformación de un sistema de información geográfica y en el análisis de datos estadísticos provenientes de fuentes oficiales. A partir de los informes del Sistema Normativo del Equipamiento Urbano se determinaron el dimensionamiento y las capacidades actuales de los elementos de dicho equipamiento, y para el cálculo de los futuros requerimientos se utilizaron las proyecciones demográficas del Consejo Nacional de Población. Los resultados revelan las modificaciones de las necesidades de estos elementos del equipamiento derivadas de las tendencias demográficas y llevan a proponer recomendaciones para anticipar medidas que enfrenten este nuevo desafío en las ciudades del país.

  2. ANÁLISIS DE LA DISCLOSURE DE LOS REQUERIMIENTOS DE PAGOS PÚBLICOS: INFLUENCIA DE LA LEGISLACIÓN Y FUNDAMENTOS DE LA TEORÍA CONTABLE

    Directory of Open Access Journals (Sweden)

    Lucas Oliveira Gomes Ferreira

    2012-03-01

    Full Text Available La finalidad del estudio es analizar la disclosure de los requerimientos de pagos públicos a la luz de la Teoría Contable, además de verificar si la legislación vigente interfiere en el tratamiento contable de esos valores. Em ese sentido, fue realizada investigación bibliográfica y documental sobre el armazón legal y procedimentos contables adoptados y efectuada colecta de datos en el Sistema de Colecta de Datos de la Secretaría del Tesoro Nacional (SISTN, en el período de 2004 a 2009, además de estudio realizado por el Supremo Tribunal Federal (STF en 2004. La justificativa del estudio está en la percepción de que más de la mitad de los requerimentos de pago públicos no está registrada en las cuentas públicas. Como consecuencia, considerando que los requerimentos de pago configuran (1 derecho líquido y cierto al requirente en el proceso, y (2 deuda efectiva del ente público, la falta de disclosure perjudica tanto al beneficiado por la decisión judicial - que no ve reflejado su derecho en las cuentas públicas y tampoco tiene expectativa para cobrar -, en lo referente al gestor gubernamental y a la sociedad - que no disponen de informaciones confiables que permitan gerenciar esos valores de manera eficaz. La innovación consiste en la discusión sobre la identificación del adecuado momento del hecho generador de los requerimientos de pago públicos y de la propuesta de disclosure considerando la clasificación de riesgo. Concluye que la influencia de la legislación vigente y la no observancia de los fundamentos de la doctrina contable están entre los probables factores que han afectado la adecuada contabilización de los requerimentos de pago en el ámbito de la Administración Pública brasileña.

  3. Análisis de la Disclosure de los Requerimientos de Pagos Públicos: Influencia de la legislación y fundamentos de la teoría contable

    Directory of Open Access Journals (Sweden)

    Lucas Oliveira Gomes Ferreira

    2012-01-01

    Full Text Available La finalidad del estudio es analizar la disclosure de los requerimientos de pagos públicos a la luz de la Teoría Contable, además de verificar si la legislación vigente interfiere en el tratamiento contable de esos valores. En ese sentido, fue realizada investigación bibliográfica y documental sobre el armazón legal y procedimientos contables adoptados y efectuada colecta de datos en el Sistema de Colecta de Datos de la Secretaría del Tesoro Nacional (SISTN, en el período de 2004 a 2009, además de estudio realizado por el Supremo Tribunal Federal (STF en 2004. La justificativa del estudio está en la percepción de que más de la mitad de los requerimientos de pago públicos no está registrada en las cuentas públicas. Como consecuencia, considerando que los reque - rimientos de pago configuran (1 derecho líquido y cierto al requirente en el proceso, y (2 deuda efectiva del ente público, la falta de disclosure perjudica tanto al beneficiado por la decisión judicial - que no ve reflejado su derecho en las cuentas públicas y tampoco tiene expectativa para cobrar -, en lo referente al gestor guberna - mental y a la sociedad - que no disponen de informaciones confiables que permitan gerenciar esos valores de manera eficaz. La innovación consiste en la discusión sobre la identificación del adecuado momento del hecho generador de los requerimientos de pago públicos y de la propuesta de disclosure considerando la clasificación de riesgo. Concluye que la influencia de la legislación vigente y la no observancia de los fundamentos de la doctrina contable están entre los probables factores que han afectado la adecuada contabilización de los reque - rimientos de pago en el ámbito de la Administración Pública brasileña

  4. Requerimiento Hídrico de Gmelina arborea en Etapa de Vivero Bajo Condiciones Controladas

    OpenAIRE

    Amir Vergara; Teobaldis Mercado; Alfredo Jarma; Kellen Gatti

    2017-01-01

    RESUMEN Con el fin de conocer el requerimiento hídrico de Melina en la etapa de vivero, se realizó un ensayo con cuatro coeficientes de consumo (Kc: 0,6, 0,8, 1,2, 1,4. Estos tratamientos se transformaron en láminas de riego de 2,4 mm.día–1, 3,2 mm.día–1, 4,8 mm.día–1 y 5,6 mm.día–1 respectivamente, debido a que la evapotranspiración de referencia (ETO) de la zona fue de 4 mm.día–1. Se observó que a medida que se aumentaba la lámina de riego, disminuía el crecimiento de las plantas. Los valor...

  5. Requerimientos teórico-metodológicos para desarrollar habilidades en la obtención de información científica en estudiantes universitarios

    Directory of Open Access Journals (Sweden)

    Juan Carlos Álvarez Yero

    Full Text Available El trabajo ofrece los requerimientos teórico-metodológicos para el desarrollo de habilidades en la obtención de información científica. Se parte del análisis teórico de la información como proceso y resultado de la interacción del sujeto con su realidad y de asumir las habilidades para obtener información científica dentro de las habilidades informativas que pueden potencialmente trabajarse a la luz de las diferentes disciplinas académicas. Finalmente se brindan los fundamentos metodológicos para la implementación de los procedimientos propuestos desde el proceso de enseñanza-aprendizaje en estudiantes universitarios, encaminados a sistematizar las operaciones de estas habilidades genéricas comunes a toda profesión.

  6. Evaluación de requerimientos ecológicos para el diseño de regímenes ambientales de caudales fluviales

    Directory of Open Access Journals (Sweden)

    Juan Manuel Diez-Hernández

    2008-11-01

    Full Text Available Las sociedades avanzadas medioambientalmente están reclamando progresivamente una gestión fluvial auténticamente integral, que implemente Planes de Manejo de Cuencas Hidrográficas fundamentados en el paradigma del Régimen Ambiental de Caudales (RAC. Este trabajo sugiere una metodología genérica para establecer RAC confiables, que posibiliten el aprovechamiento hídrico a un coste ecológico admisible. Adicionalmente, plantea los criterios y técnicas preferentes para la evaluación de los requerimientos ecosistémicos de caudal, los cuales componen el RAC mediante el Régimen de Caudales Ecológicos (RCE. La adaptación de estos procedimientos para los ríos de Colombia favorecerá la conservación de su valiosa biodiversidad. / The environmentally advanced societies are claiming progressively an authentically integral fluvial management, that implements Watershed Management Programs based on the paradigm of the Environmental Flows Regime (EFR. This work suggests a generic methodology for the reliable EFR setting, that facilitate the water use with an environmental acceptable cost. Additionally, it outlines the approaches and outstanding techniques for the evaluation of instream flow requirements, which constitute the EFR by means of the Instream Flow Regime (IFR. The adaptation of these approaches to the Colombian rivers will contribute to the conservation of their valuable biodiversity.

  7. Indicador espacial del metabolismo urbano. Huella Ecológica de la ciudad de Tandil, Argentina

    OpenAIRE

    Guerrero, Elsa Marcela; Guiñirgo, Fernando

    2008-01-01

    Además de problemas urbanos evidentes -contaminación, residuos, etc.-, existe un problema asociado a la propia dinámica del sistema urbano que es de interés: la apropiación creciente de ecosistemas productivos externos destinados a satisfacer los requerimientos del metabolismo urbano de la ciudad de Tandil, Argentina. Se emplea para su cálculo, la Huella Ecológica (HE) (Rees 1996a; Wackernagel 1996) que permite evaluar en términos espaciales –hectáreas- los requerimientos de alimentos, combus...

  8. Simulación de los requerimientos hídricos de pasturas en un escenario de cambios climáticos generados con análisis espectral singular

    Directory of Open Access Journals (Sweden)

    Arce Barboza Blanca Aurora

    2010-03-01

    Full Text Available Aunque los modelos climáticos globales muestran que cada vez son más altas las tasas de cambio de la temperatura y la precipitación, no proporcionan la información necesaria para que los actores del sistema producción-consumo puedan definir las medidas de adaptación a escala local. En el presente trabajo se demuestra de qué manera se pueden generar escenarios de cambio climático más locales, basados en el análisis de las tendencias de las series de tiempo de los elementos del clima. Se plantea la prueba de Mann-Kendall para determinar si existe tendencia en las series temporales de dos elementos climáticos y el análisis espectral singular para generar escenarios futuros de las variables climáticas analizadas. Los resultados mostraron que en dos municipios de Colombia (El Espinal, Tolima, y Mosquera, Cundinamarca los pastos pará (Brachiaria mutica y kikuyo (Pennisetum clandestinum, respectivamente, tienden a requerir más agua por aumento de la evapotranspiración, sin embargo, es la textura del suelo la que determina cambios drásticos entre escenarios climáticos, en términos de requerimientos de riego.

  9. Simulación de los requerimientos hídricos de pasturas en un escenario de cambios climáticos generados con análisis espectral singular

    Directory of Open Access Journals (Sweden)

    Andrés Javier Peña Quiñones

    2010-01-01

    Full Text Available Aunque los modelos climáticos globales muestran que cada vez son más altas las tasas de cambio de la temperatura y la precipitación, no proporcionan la información necesaria para que los actores del sistema producción-consumo puedan definir las medidas de adaptación a escala local. En el presente trabajo se demuestra de qué manera se pueden generar escenarios de cambio climático más locales, basados en el análisis de las tendencias de las series de tiempo de los elementos del clima. Se plantea la prueba de Mann-Kendall para determinar si existe tendencia en las series temporales de dos elementos climáticos y el análisis espectral singular para generar escenarios futuros de las variables climáticas analizadas. Los resultados mostraron que en dos municipios de Colombia (El Espinal, Tolima, y Mosquera, Cundinamarca los pastos pará (Brachiaria mutica y kikuyo (Pennisetum clandestinum, respectivamente, tienden a requerir más agua por aumento de la evapotranspiración, sin embargo, es la textura del suelo la que determina cambios drásticos entre escenarios climáticos, en términos de requerimientos de riego.

  10. Características psicológicas relacionadas con el rendimiento: comparación entre los requerimientos de los entrenadores y la percepción de los deportistas

    Directory of Open Access Journals (Sweden)

    Javier Mahamud

    2005-01-01

    Full Text Available El objeto del estudio es comparar la situación psicológica de un grupo de deportistas con la considerada ideal por parte de sus entrenadores. Como instrumento se ha utilizado el cuestionario "Características psicológicas relacionadas con el rendimiento deportivo" (CPRD. Participan 80 deportistas (piragüistas y nadadores y 6 entrenadores. Existe una correlación para los practicantes de ambos deportes entre las puntuaciones obtenidas en las distintas escalas del cuestionario y aquellas que desean los entrenadores para sus atletas. Sin embargo, las puntuaciones propuestas por los entrenadores, son, en general, más altas que las resultantes de las auto-evaluaciones de los deportistas. En el caso de los piragüistas esas diferencias afectan fundamentalmente al control del estrés y a la motivación. Los aspectos relacionados con la cohesión de equipo, que menos diferencian a los piragüistas de los requerimientos de sus entrenadores, son aquellos en los que más coinciden los nadadores y sus preparadores. El análisis realizado pone de manifiesto cómo en ambas disciplinas deportivas existen aspectos a trabajar para lograr alcanzar el estado psicológico ideal marcado por los entrenadores.

  11. EDITORIAL: Colloidal suspensions Colloidal suspensions

    Science.gov (United States)

    Petukhov, Andrei; Kegel, Willem; van Duijneveldt, Jeroen

    2011-05-01

    Special issue in honour of Henk Lekkerkerker's 65th birthday Professor Henk N W Lekkerkerker is a world-leading authority in the field of experimental and theoretical soft condensed matter. On the occasion of his 65th birthday in the summer of 2011, this special issue celebrates his many contributions to science. Henk Lekkerkerker obtained his undergraduate degree in chemistry at the University of Utrecht (1968) and moved to Calgary where he received his PhD in 1971. He moved to Brussels as a NATO fellow at the Université Libre de Bruxelles and was appointed to an assistant professorship (1974), an associate professorship (1977) and a full professorship (1980) in physical chemistry at the Vrije Universiteit Brussel. In 1985 he returned to The Netherlands to take up a professorship at the Van 't Hoff Laboratory, where he has been ever since. He has received a series of awards during his career, including the Onsager Medal (1999) of the University of Trondheim, the Bakhuys Roozeboom Gold Medal (2003) of the Royal Dutch Academy of Arts and Sciences (KNAW), the ECIS-Rhodia European Colloid and Interface Prize (2003), and the Liquid Matter Prize of the European Physical Society (2008). He was elected a member of KNAW in 1996, was awarded an Academy Chair position in 2005, and has held several visiting lectureships. Henk's work focuses on phase transitions in soft condensed matter, and he has made seminal contributions to both the theoretical and experimental aspects of this field. Here we highlight three major themes running through his work, and a few selected publications. So-called depletion interactions may lead to phase separation in colloid-polymer mixtures, and Henk realised that the partitioning of polymer needs to be taken into account to describe the phase behaviour correctly [1]. Colloidal suspensions can be used as model fluids, with the time- and length-scales involved leading to novel opportunities, notably the direct observation of capillary waves at a

  12. Análisis de requerimientos y diseño de modelo de datos para el desarrollo de una solución ERP vertical adaptada al sector cerámico

    Directory of Open Access Journals (Sweden)

    Oltra-Badenes, R. F.

    2013-04-01

    Full Text Available Currently, the existing information systems, and specifically the ERP, can not give adequate support to the management of manufacturing companies of ceramic tile, because, among other reasons, not to contemplate the existence of tone, size and quality within the same product. This feature, caused by the lack of homogeneity of the product (LHP, generates various problems in managing the product through the different business processes, such as, stocks management, order management, the production management, etc. Thus, it is necessary to develop an ERP solution that is able to manage adequately the ceramic product, including tone, size and quality. In this paper we analyze the requirements of the ceramic sector, in terms of product identification, and propose a data model to meet these requirements. The model arises as a basic guide for the development of vertical ERP solutions tailored to the ceramic industry.En la actualidad, los sistemas de información existentes, y en concreto los ERP, no pueden dar un soporte adecuado a la gestión de las empresas de fabricación de baldosa cerámica, debido, entre otros motivos, a que no contemplan la existencia del tono, calibre y calidad dentro de un mismo producto. Esta particularidad, ocasionada por la falta de homogeneidad del producto (FHP, genera diversas problemáticas en la gestión del producto a través de los diferentes procesos de la empresa, como por ejemplo; la gestión de stocks, la gestión de pedidos de venta, la gestión de producción, etc. Así pues, se hace necesario el desarrollo de una solución ERP que sea capaz de gestionar el producto cerámico de forma adecuada, incluyendo tono, calibre y calidad. En este trabajo se analizan los requerimientos del sector cerámico, en cuanto a la identificación de los productos, y se propone un modelo de datos para dar respuesta a dichos requerimientos. El modelo se plantea como una guía básica para el desarrollo de soluciones ERP verticales

  13. Metodologías ágiles enfocadas al modelado de requerimientos

    OpenAIRE

    Silvia Gabriela Rivadeneira Molina

    2014-01-01

    El dinamismo y la variabilidad de la industria del software hace necesario replantear las bases y prácticas que sustentan el desarrollo de software convencional. Un reciente estudio realizado por (Boehm, 2006), sobre tendencias en ingeniería del software, muestra que el mercado actual está caracterizado por el desarrollo rápido de aplicaciones y la reducción de la vida de los productos. En este contexto variable e inestable se requiere como ventaja competitiva aumentar la productividad y sati...

  14. REQUERIMIENTOS ACTUALES EN LA POLÍTICA SOCIAL COSTARRICENSE, EL SIPO Y EL SAB COMO RESPUESTA

    Directory of Open Access Journals (Sweden)

    Paul Soto Z.

    2001-12-01

    Full Text Available Durante las dos últimas décadas del siglo XX los diferentes países de América Latina tuvieron que hacer frente a diferentes períodos de crisis en el ámbito económico y a un estancamiento o caducidad de los modelos de desarrollo que se venían aplicando hasta ese momento. La respuesta inmediata por parte de las naciones afectadas fue someterse a una serie de programas de ajuste estructural, siguiendo en ese sentido los lineamientos dados por los organismos financieros internacionales.Lo antes expuesto implicó el replanteamiento de los modelos de desarrollo y del papel del Estado, lo que necesariamente repercutió en la política social, que tuvo que hacer frente, entre otras cosas, a una disminución del gasto en materia de programas sociales. Dentro de este contexto se vio la necesidad de priorizar grupos de población y canalizar los limitados recursos hacia los sectores sociales que se encontraban en una condición de pobreza más aguda o que se habían visto más afectados por la crisis económica y por los programas de ajuste estructural.

  15. Metodologías ágiles enfocadas al modelado de requerimientos

    Directory of Open Access Journals (Sweden)

    Silvia Gabriela Rivadeneira Molina

    2014-06-01

    Full Text Available El dinamismo y la variabilidad de la industria del software hace necesario replantear las bases y prácticas que sustentan el desarrollo de software convencional. Un reciente estudio realizado por (Boehm, 2006, sobre tendencias en ingeniería del software, muestra que el mercado actual está caracterizado por el desarrollo rápido de aplicaciones y la reducción de la vida de los productos. En este contexto variable e inestable se requiere como ventaja competitiva aumentar la productividad y satisfacer las necesidades cambiantes de los clientes en el menor tiempo posible para proporcionar un mayor valor al negocio. Ante este panorama, cabe reflexionar sobre el grado de adaptación de las metodologías convencionales a estas circunstancias. La mayoría de los estudios coinciden en que el carácter normativo y la fuerte dependencia de planificaciones previas al desarrollo que definen a las metodologías convencionales, implican que resulten excesivamente pesadas para cubrir las necesidades de un amplio porcentaje del mercado software actual. Las metodologías ágiles surgidas a fines de los ’90, no han sidomuy tenidas en cuenta por el mundo académico, quizás recién a mediados de la década anterior se comienzan a encontrar trabajos de investigación al respecto. En este trabajo se analizan las metodologías ágiles más utilizadas enfocándose en las primeras etapas del ciclo de vida del software ydeteniéndose en las prácticas, técnicas y productos que se utilizan en las mencionadas etapas. Para ello se indagó en la literatura existente para conocer cada una de las metodologías involucradas, logrando una primera selección y comparación de las mismas, y exponiendo los resultados y sus conclusiones en este informe.

  16. Especificación de Requerimientos para el Desarrollo de Software Automotriz en México

    OpenAIRE

    Jorge R. Aguilar Cisneros; Carlos Alberto Fernández-y-Fernández

    2015-01-01

    Actualmente, dentro del sector automotriz, México es reconocido a nivel mundial, como un excelente país ensamblador, sin embargo, países como Alemania, Estados Unidos y Japón, entre otros, son reconocidos mundialmente además de ensambladores como países innovadores de éste sector. Bajo este escenario, se propone que México incursione en la investigación e innovación automotriz, particularmente, en el área de desarrollo de sistemas de software automotriz embebido tanto críticos como no crítico...

  17. Caracterización de un robot para aplicaciones de mecanizado con requerimientos de tolerancias

    OpenAIRE

    Ferreras Higuero, Eugenio

    2014-01-01

    El presente Trabajo fin Fin de Máster, versa sobre una caracterización preliminar del comportamiento de un robot de tipo industrial, configurado por 4 eslabones y 4 grados de libertad, y sometido a fuerzas de mecanizado en su extremo. El entorno de trabajo planteado es el de plantas de fabricación de piezas de aleaciones de aluminio para automoción. Este tipo de componentes parte de un primer proceso de fundición que saca la pieza en bruto. Para series medias y altas, en función de las pr...

  18. Combined cycles, impacts of technological requirements; Ciclos combinados, impactos de requerimientos tecnologicos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Santalo, Jose Miguel [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    The fundamental growth of the Mexican electrical sector for the next ten years is planned on base of the installation of 20 thousand Mw plants of combined cycle. This article presents an analysis of the impact of these power stations finding out that the power stations of combined cycle are at the moment cheaper - from 600 to 700 dollars by installed kW- than the alternative coal options or fuel oil, that are in the range of 900 to 1200 dollars per kW, in addition to which the time required for their construction is shorter. [Spanish] El crecimiento fundamental del sector electrico mexicano para los proximos diez anos esta planeado con base en la instalacion de 20 mil Mw de plantas de ciclo combinado. Este articulo presenta un analisis del impacto de dichas centrales encontrando que las centrales de ciclo combinado actualmente resultan mas baratas - de 600 a 700 dolares por kW instalado - que las opciones alternativas de carbon o combustoleo que estan en el rango de 900 a 1200 dolares por kW, ademas de que los tiempos requeridos para su construccion son menores.

  19. Evaluación del nivel de madurez y capacidad del sistema integrado de control hidrocarburífero (SICOHI) del Ministerio de Minas y Petróleos aplicando el marco de referencia Cobit.

    OpenAIRE

    Jiménez Amoroso, María Belén; Pallo Navas, Carlos Andrés

    2010-01-01

    Conceptualización del sistema integrado de control hidrocarburífero (Secohi). Descripción del proceso de gestión tecnológica y soporte al sistema integrado de control hidrocarburífero. Descripción de los procesos usuarios. Marco teórico. Modelo de madurez. Requerimientos del negocio. Nivel de madurez del sistema. Manejo de metodología COBIT. Evaluación del sistema integrado de control hidrocarburífero (SICOHI).

  20. Suspension trauma; Le traumatisme de suspension

    Energy Technology Data Exchange (ETDEWEB)

    Trudel, S. [Le Centre de sante et de services sociaux du rocher Perce, Chandler, PQ (Canada)

    2010-07-01

    This presentation discussed the precautions that should be taken to avoid falls from wind turbines or transmission towers. Suspension trauma was explained by a medical doctor in terms of physiology and the body's normal circulation and the elements that disturb normal physiology when in suspension. The trauma occurs following a fall, which carries the risk of 1or more disorders, such as massive hemorrhage, high cardiac pulse, and constriction of blood vessels. Nausea, vertigo, cardiac arrhythmia and sweating occur 15 to 20 minutes following the fall. The presentation emphasized the importance of having qualified personnel at the site and wearing proper harnesses and equipment that supports the neck. figs.

  1. Uso de la programación lineal paramétrica en la solución de un problema de planeación de requerimiento de materiales bajo condiciones de incertidumbre

    Directory of Open Access Journals (Sweden)

    Martin Darío Arango Serna

    2010-09-01

    Full Text Available El uso de la teoría de los conjuntos difusos como una metodología para el modelado y análisis de sistemas de decisión es de particular interés para investigadores en ingeniería industrial, debido a la capacidad para permitir un análisis cualitativo y cuantitativo de los problemas que implican vaguedad e imprecisión. Es así como, en un esfuerzo por obtener una mejor compresión del uso de la lógica difusa en la ingeniería industrial y más específicamente en el campo de la planificación de la producción, se proporciona en el presente artículo un problema de planeación de requerimiento de materiales (MRP bajo condiciones de incertidumbre aplicado a la industria automotriz, y el cual es solucionado a través de programación lineal paramétrica difusa.

  2. Trazabilidad y validación de requerimientos funcionales de sistemas informáticos mediante la transformación de modelos conceptuales

    Directory of Open Access Journals (Sweden)

    Oscar Carlos Medina

    2016-04-01

    Full Text Available El objetivo de este trabajo es caracterizar un método que permita la trazabilidad y validación de requerimientos funcionales de un sistema de información mediante la transformación de modelos conceptuales. Para lo cual se construyó un software denominado SIAR (Sistema Integral de Administración de Requerimientos que administra los requerimientos funcionales y utiliza UML (Lenguaje Unificado de Modelado para su representación como Casos de Uso. La finalidad principal de esta aplicación web es la gestión de Casos de Uso con una herramienta que agilice su registro, normalice su contenido y posibilite la trazabilidad de los cambios e implemente validaciones funcionales. Por ejemplo, un procedimiento automatizado de análisis de consistencia de Casos de Uso, para lo cual el sistema genera un grafo con la transición de estados de cada Caso de Uso que es analizado en un simulador de autómata finito determinista para verificar la cohesión de los escenarios en él definidos.

  3. Preparar para el futuro: el rol del educador

    Directory of Open Access Journals (Sweden)

    Myrna A. Cuevas Ruiz

    2000-12-01

    Full Text Available El artículo aborda el problema de la educación a la luz de las esperanzas y exigencias que se le plantean y de sus posibilidades reales para responder a los retos. En este marco, ubica la figura del educador, las cualidades que deben caracterizarlo para responder a las demandas de los retos educativos y los requerimientos que, en el contexto de la profesión docente, deben satisfacerse para impulsar los cambios.

  4. Evaluacion de los desórdenes musculo-esqueléticos (DMEs) mediante el método ERIN: caso de los conductores de autobús de la Universidad del Quindío

    OpenAIRE

    Gómez Yepes, Milena Elizabeth; Cremades Oliver, Lázaro Vicente; Montoya Taborda, Juan Fernando

    2015-01-01

    Uno de los mayores retos de la ergonomía ha sido el estudio de la interacción del hombre frente a los requerimientos físicos (postura, fuerza, movimiento). Cuando estos requerimientos sobrepasan la capacidad de respuesta del individuo o no hay una adecuada recuperación biológica de los tejidos, este esfuerzo puede asociarse a la presencia de los Desórdenes Musculo-Esqueléticos (DME) causantes de ausentismo laboral. Los DME ocupacionales más conocidos son: cervicalgia, epicondiditis, bursitis,...

  5. Rheology of organoclay suspension

    CSIR Research Space (South Africa)

    Hato, MJ

    2011-05-01

    Full Text Available The authors have studied the rheological properties of clay suspensions in silicone oil, where clay surfaces were modified with three different types of surfactants. Dynamic oscillation measurements showed a plateau-like behavior for all...

  6. Hydropneumatic suspension systems

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Wolfgang

    2011-07-01

    Hydropneumatic suspensions systems combine the excellent properties of gas springs with the favourable damping properties of hydraulic fluids. The advantages of these systems are particularly appropriate for automotive applications, such as passenger cars, trucks and agricultural equipment. In this book, Dr. Bauer provides an extensive overview of hydropneumatic suspension systems. Starting with a comparison of different types of suspension systems, the author subsequently describes the theoretical background associated with spring and damping characteristics of hydropneumatic systems and furthermore explains the design of the most important system components. Additionally he gives an overview of level control systems and various special functions. Finally the technology is illustrated by design examples and the outlook for future hydropneumatic suspensions is discussed. (orig.)

  7. Suspension Trauma / Orthostatic Intolerance

    Science.gov (United States)

    ... Suspension Trauma/Orthostatic Intolerance Safety and Health Information Bulletin SHIB 03-24-2004, updated 2011 This Safety ... the harness, the environmental conditions, and the worker's psychological state all may increase the onset and severity ...

  8. The Mystical Suspension

    Directory of Open Access Journals (Sweden)

    Héctor Santiesteban Oliva

    2016-11-01

    Full Text Available Mistical suspension, silence, time, absolute, ontology, ineffability, aletheiaIn the mystical ecstasy there is a sensorial and intellectual suspension when contemplating the absolute, the ontological Being. Silence is not only significant: it is revealing. The greatest expression of experience inner silence . The word is insufficient when the ontological reality is revealed. Revelation or truth , the Greek concept of aletheia, takes on greater significance in that transcendental experience. It is also suspended phenomenological time and remains eternity open.

  9. Análisis interrelacionado de las insuficiencias del proceso de planeación estratégica en empresas de Jalisco

    Directory of Open Access Journals (Sweden)

    Silvio Hernández Cotón

    2016-02-01

    En el artículo se realiza una caracterización de las empresas del futuro y de cuáles deben ser sus características esenciales, así como los requerimientos necesarios para desarrollar mayor competitividad en el actual mundo globalizado

  10. Aplicación práctica del diseño de pruebas de software a nivel de programación

    OpenAIRE

    Guzmán Cortés, Oscar Hernando

    2006-01-01

    Las pruebas deben presentarse a lo largo de todo el ciclo de vida del desarrollo de software, pasando por requerimientos, análisis y diseño, programación, puesta en marcha y mantenimiento. El siguiente artículo presenta el esquema de diseño y ejecución de pruebas de software, centrándose específicamente en las pruebas de programación, definidas para el departamento de Desarrollo de Sistemas de la Universidad Icesi. El esquema de pruebas de requerimientos se muestra de manera general, mien...

  11. Hybrid superconducting magnetic suspensions

    International Nuclear Information System (INIS)

    Tixador, P.; Hiebel, P.; Brunet, Y.; Chaud, X.; Gautier-Picard, P.

    1996-01-01

    Superconductors, especially high T c ones, are the most attractive materials to design stable and fully passive magnetic suspensions which have to control five degrees of freedom. The hybrid superconducting magnetic suspensions present high performances and a simple cooling mode. They consist of a permanent magnet bearing, stabilized by a suitable magnet-superconductor structure. Several designs are given and compared in terms of forces and stiffnesses. The design of the magnet bearing plays an important part. The superconducting magnetic bearing participates less in levitation but must provide a high stabilizing stiffness. This is achieved by the magnet configuration, a good material in term of critical current density and field cooling. A hybrid superconducting suspension for a flywheel is presented. This system consists of a magnet thrust bearing stabilized by superconductors interacting with an alternating polarity magnet structure. First tests and results are reported. Superconducting materials are magnetically melt-textured YBaCuO

  12. Requerimientos energéticos de ovinos de pelo en las regiones tropicales de Latinoamérica. Revisión

    Directory of Open Access Journals (Sweden)

    Alfonso Juventino Chay-Canul

    2016-01-01

    Full Text Available Los ovinos de pelo juegan un papel importante en la producción animal en las regiones tropicales; sin embargo, sus requerimientos nutricionales no se han determinado en la misma medida que los de las razas de lana. Debido a las condiciones ambientales de las regiones tropicales (clima, calidad y disponibilidad de alimentos, es razonable la hipótesis de que los requerimientos de energía metabolizable (EM y la eficiencia de utilización de la EM pueden ser diferentes entre los ovinos de razas de pelo y de lana. La información disponible en ovinos de pelo muestra una gran discrepancia en cuanto a las necesidades de energía. Con base en datos de la literatura disponible para hembras ovinas, el requerimiento de EM para mantenimiento (EMm fue de 419±129 kJ/kg PC0.75 (media ± desviación estándar y para machos fue 388±123 kJ/kg BW0.75. El requerimiento de energía neta para la ganancia de peso (ENg varió de 8.75 a 14.06 kJ/g (11.63±1.86 kJ/g. Las eficiencias de utilización de la EM para el mantenimiento (km y la ganancia de peso (kg fueron de 0.66±0.023 y 0.42±0.044, respectivamente. Esta revisión también indicó que la información es escasa para ovejas adultas en diferentes etapas fisiológicas (mantenimiento, lactancia y gestación. Se requiere más trabajo de investigación con relación a la estimación de las necesidades de energía de los ovinos de pelo, con el fin de hacer ajustes a los modelos existentes de alimentación, con el objetivo de predecir la respuesta de los animales con la condición que prevalece en los trópicos (tipo de animal, medio ambiente y alimentos disponibles.

  13. Magnetic Suspension Technology Workshop

    International Nuclear Information System (INIS)

    Keckler, C.R.; Groom, N.J.; Britcher, C.P.

    1993-01-01

    In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided. Separate abstracts have been prepared for articles from this report

  14. Advanced structural materials for the suspension bridge solution of the project to establish a permanent link over the strait of Gibraltar; Materiales estructurales para la solucion puente, relacionados con el proyecto de enlace fijo a traves del estrecho de Gibraltar

    Energy Technology Data Exchange (ETDEWEB)

    Galligo Esteve, J. M.

    2015-07-01

    In 1995, the Spanish-moroccan Mixed Committee for the Gibraltar Strait Fixed Link selected the excavated tunnel solution, as preferred to the suspension bridge one. This was based on detailed scientific and technical studies. Nonetheless, further geology studies on the tunnel layout have detected sections of difficult excavation, which would entail increases in the length, the term of execution and the cost of the tunnel. Taking this into account, and due to the important technology development in bridge construction that has taken place over the last 20 years, the paper presents a state-of-the-art of the most advanced structural materials (high performance concrete, ultra-high performance concrete, suspension cables, structural steel, reinforcing and prestressing steel, stainless steel) available for an eventual reconsideration of the suspension bridge solution for the Gibraltar Strait Fixed Link. (Author)

  15. Compressible Fluid Suspension Performance Testing

    National Research Council Canada - National Science Library

    Hoogterp, Francis

    2003-01-01

    ... compressible fluid suspension system that was designed and installed on the vehicle by DTI. The purpose of the tests was to evaluate the possible performance benefits of the compressible fluid suspension system...

  16. Metodología para la consolidación de los Procesos y Mejores Prácticas del Departamento de Aseguramiento de Calidad de Software en la empresa Prodigious Costa Rica

    OpenAIRE

    Incer Valverde, Laura; Alvarado Arce, Alejandro

    2015-01-01

    Proyecto final de graduación, Maestría profesional El aseguramiento de la calidad de software es uno de los procesos del ciclo de vida de desarrollo del software que tiene como objetivo validar el correcto funcionamiento, el cumplimiento de los requerimientos y las especificaciones de las aplicaciones de los productos basados en software. En la empresa Prodigious Costa Rica, los colaboradores del departamento de aseguramiento de calidad de software participan en tareas y actividades qu...

  17. Multiobjective suspension control problem

    NARCIS (Netherlands)

    Jager, de A.G.

    1995-01-01

    The paper describes a (controller) design problem in the field of suspension systems for transport vehicles. A ten degrees-of-freedom model for a tractor-semitrailer vehicle is presented, using parameters derived from a real vehicle, which should be used for design and verification purposes. Road

  18. Anestesia general para cesárea. Papel del sugammadex en la calidad y la seguridad del acto anestésico. Reporte de caso

    OpenAIRE

    Tafur B, Luis Alberto; Lema Flórez, Eduardo

    2012-01-01

    La cesárea es una de las intervenciones quirúrgicas más realizadas en el planeta. En el 5% de los casos se practica bajo anestesia general (7,5 millones de anestesias generales para cesárea cada año). Debido a sus requerimientos particulares (paciente con estómago lleno, necesidad de relajación neuromuscular, bienestar del binomio madre-hijo, expectativas de pronta atención del recién nacido por parte de la madre y relativa corta duración del procedimiento) la anestesia general representa un ...

  19. comportamiento del consumidor

    Directory of Open Access Journals (Sweden)

    Erico Rentería Pérez

    2006-01-01

    Full Text Available En este artículo se analiza el posicionamiento exitoso de los profesionales, particularmente los jóvenes, a partir de las nuevas realidades del mundo y del mercado laboral, así como la empleabilidad como constructo, estrategias posibles y, finalmente, una discusión sobre falacias y realidades de discursos sobre mercado de trabajo profesional. La reflexión se liga a dos investigaciones, y a redes de discusión en Brasil y Colombia, que reflexionan sobre las implicaciones y requerimientos estratégicos que marcan el ingreso o permanencia en el mercado de trabajo de profesionales jóvenes, y se reconoce que esto afecta a otros tipos de profesionales. La investigación de Rentería (2006ª sobre Empleabilidad arroja información sobre las dos primeras partes. La de Enríquez y Rentería (2006 sobre Estrategias de aprendizaje y empleabilidad informa sobre la tercera. Apoyan la discusión elementos de psicología y comportamiento del consumidor. Se discute la inclusión social y calidad de vida por el trabajo.

  20. Consumo de madera para construcción en Costa Rica y requerimientos para satisfacer a los usuarios

    OpenAIRE

    Serrano-Montero, José Rafael; Instituto Tecnológico de Costa Rica, Escuela de Ingeniería Forestal; Cartago, Costa Rica

    2012-01-01

    Se brindan cifras de consumo global de madera en troza y aserrada en la industria forestal costarricense, así como la distribución porcentual de consumo del sector de construcción entre otros. Se indican además las características principales de la madera aserrada y los aspectos que deberían considerar los productores de madera para satisfacer las necesidades básicas de los usuarios del sector de construcción.

  1. Implementación de un piloto del componente comercial del data warehouse de Etapatelecom

    OpenAIRE

    Vélez Iñiguez, Roberto José

    2008-01-01

    El sistema a desarrollar se enmarca en una arquitectura de Data Warehouse, cuyo objetivo es extraer información de los Sistemas Transaccionales disponibles en Etapatelecom para ser usada en una Base de Datos orientada a la toma de decisiones (Data Warehouse) para el Área Comercial de la Empresa. El procedimiento se inicia con un análisis de los requerimientos de los usuarios estratégicos del Área Comercial de Etapatelecom donde se identifican los indicadores de negocio (Medidas) y las Dimensi...

  2. Estado de la Cuestión del Psicoanálisis con Respecto a la Criminología

    OpenAIRE

    Carpio Mosquera, Carlos Patricio

    2013-01-01

    La criminología, al ser considerada una ciencia que estudia las causas del crimen intentando encontrar una manera de preconizar remedios al comportamiento antisocial del hombre, se alimenta de varios saberes para lograr su objetivo; la sociología, la antropología y la psicología colaboran en la búsqueda de estos remedios de la conducta criminal. En la actualidad es común escuchar el requerimiento, del lado del discurso jurídico, de que los profesionales Psi colaboren ...

  3. Evaluación del golfo de California como una fuente potencial de actinobacterias marinas bioactivas

    OpenAIRE

    Torres-Beltrán, M; Cardoso-Martínez, F; Millán-Aguiñaga, N; Becerril-Espinosa, A; Soria-Mercado, IE

    2012-01-01

    Las actinobacterias son productoras de una gran variedad de compuestos utilizados actualmente como antibióticos y anticancerígenos. En este trabajo se evaluó el potencial del golfo de California como fuente de cepas de actinobacterias bioactivas. En total, se aislaron 235 cepas de actinobacterias de los sedimentos de bahía Concepción y bahía de los Ángeles, (México). Con base en su morfología, requerimiento de agua de mar para su crecimiento y secuenciación del gen 16S del ARNr, las cepas se ...

  4. Particle interactions in concentrated suspensions

    International Nuclear Information System (INIS)

    Mondy, L.A.; Graham, A.L.; Abbott, J.R.; Brenner, H.

    1993-01-01

    An overview is presented of research that focuses on slow flows of suspensions in which colloidal and inertial effects are negligibly small. The authors describe nuclear magnetic resonance imaging experiments to quantitatively measure particle migration occurring in concentrated suspensions undergoing a flow with a nonuniform shear rate. These experiments address the issue of how the flow field affects the microstructure of suspensions. In order to understand the local viscosity in a suspension with such a flow-induced, spatially varying concentration, one must know how the viscosity of a homogeneous suspension depends on such variables as solids concentration and particle orientation. The authors suggest the technique of falling ball viscometry, using small balls, as a method to determine the effective viscosity of a suspension without affecting the original microstructure significantly. They also describe data from experiments in which the detailed fluctuations of a falling ball's velocity indicate the noncontinuum nature of the suspension and may lead to more insights into the effects of suspension microstructure on macroscopic properties. Finally, they briefly describe other experiments that can be performed in quiescent suspensions (in contrast to the use of conventional shear rotational viscometers) in order to learn more about boundary effects in concentrated suspensions

  5. Administrative license suspension: Does length of suspension matter?

    Science.gov (United States)

    Fell, James C; Scherer, Michael

    2017-08-18

    Administrative license revocation (ALR) laws, which provide that the license of a driver with a blood alcohol concentration at or over the illegal limit is subject to an immediate suspension by the state department of motor vehicles, are an example of a traffic law in which the sanction rapidly follows the offense. The power of ALR laws has been attributed to how swiftly the sanction is applied, but does the length of suspension matter? Our objectives were to (a) determine the relationship of the ALR suspension length to the prevalence of drinking drivers relative to sober drivers in fatal crashes and (b) estimate the extent to which the relationship is associated to the general deterrent effect compared to the specific deterrent effect of the law. Data comparing the impact of ALR law implementation and ALR law suspension periods were analyzed using structural equation modeling techniques on the ratio of drinking drivers to nondrinking drivers in fatal crashes from the Fatality Analysis Reporting System (FARS). States with an ALR law with a short suspension period (1-30 days) had a significantly lower drinking driver ratio than states with no ALR law. States with a suspension period of 91-180 days had significantly lower ratios than states with shorter suspension periods, while the three states with suspension lengths of 181 days or longer had significantly lower ratios than states with shorter suspension periods. The implementation of any ALR law was associated with a 13.1% decrease in the drinking/nondrinking driver fatal crash ratio but only a 1.8% decrease in the intoxicated/nonintoxicated fatal crash ratio. The ALR laws and suspension lengths had a significant general deterrent effect, but no specific deterrent effect. States might want to keep (or adopt) ALR laws for their general deterrent effects and pursue alternatives for specific deterrent effects. States with short ALR suspension periods should consider lengthening them to 91 days or longer.

  6. Effects of game location, quality of opposition and players’ suspensions on performance in elite male handball. [Efecto según el lugar del partido, la calidad del adversario y de las exclusiones de los jugadores sobre las prestaciones del balonmano masculino de alto nivel].

    Directory of Open Access Journals (Sweden)

    Thierry Debanne

    2018-01-01

    Full Text Available Based on the territoriality concept, the aim of this study was to investigate the influence of game location, quality of opposition, and players’ exclusions on team performance (score differential. The sample consisted of 364 games (182 during each regular season 2014-2015 and 2015-16 from the French male professional league (LNH. In contrast to the territoriality theory, the results did not show that home teams were more sanctioned than visiting teams. Furthermore, using Analysis of Variance, the findings highlighted the fact that the quality of the opponent overcomes the home advantage effect and the existence of an interaction effect of [game location] x [quality of opposition] x [players’exclusions difference] on the score differential. Indeed, home teams with strong opposition perform better when they are more sanctioned (M = -2.26; SD = 3.53 than when they are less sanctioned (M = -4.9; SD = 4.69. Concerning visiting teams, faced with strong opposition, they perform better when they are less sanctioned (M = -2.8; SD = 4.5 than when they are more sanctioned (M = -5.4; SD =3.5 or when players’ exclusions are balanced (M = -5.7; SD = 5.4; also, faced with balanced opposition they perform better when they are more sanctioned (M = 0.03; SD = 4.85 than when players’ exclusions are balanced (M = -2.1; SD = 4.34. These results can contribute to a better understanding of the situational determining factors of elite handball performance, helping coaches to prepare their own team accordingly. Resumen Este estudio se apoya sobre el concepto de territorialidad. Su objectivo es investigar la influencia del lugar del partido, de la calidad del adversario y de la exclusiones de los jugadores sobre el record. La muestra constituye 364 partidos (182 de cada una de las temporadas deportistas 2014-2015 y 2015-2016 de la Liga Francesa profesional del balonmano (LNH. Al contrario de las previsiones resultante de la teoria de la territorilidad, los

  7. Magnetorheological suspension electromagnetic brake

    International Nuclear Information System (INIS)

    Bica, Ioan

    2004-01-01

    The magnetorheological suspension (MRS) brake is of the monoblock type. The main part of the electromagnetic brake is an electromagnet, between whose poles two MRS disks are placed. For distances between disks of 0.65x10 -3 m±10%, revolutions of the electric motor, coupled to the electromagnetic brake, ranging between 200 and 1600 rev/min and braking powers of up to 85 W, there are no differences in revolutions between the disks of the electromagnetic brake. For fixed revolutions of the electric motor, the revolution of the parallel disk can be modified continuously by means of the intensity of the magnetic field. In all cases, the quantity of MRS is of 0.35x10 -3 kg

  8. Calidad de aguas naturales y residuales en el sistema hidrográfico Valle del Mezquital, Hidalgo México.

    OpenAIRE

    Barrios Castillo, Isaac Mateo

    2014-01-01

    Actualmente se ha usado prácticamente toda el agua disponible para satisfacer los requerimientos de los diferentes cultivos que se explotan en la agricultura bajo riego. Cada vez más se utilizan hasta el límite las aguas superficiales y subterráneas de la más variada composición química y concentración de sales. En México, se riegan aproximadamente 180,000 ha en diferentes lugares del Valle del Mezquital con aguas residuales urbano-industriales que derivan de la zona metropolitana del Valle d...

  9. Historia natural de la infección por el virus del papiloma humano: una actualización

    OpenAIRE

    González Martínez, Gerardo; Núñez Troconis, José

    2014-01-01

    Durante los últimos años, se han sucedido grandes avances en nuestro entendimiento acerca de la biología e historia natural del Virus del Papiloma Humano (VPH). La mayoría de las infecciones por papiloma virus son transmitidas por un contacto cercano bien sea de piel a piel o mucosa a mucosa. La relación sexual con penetración no es un requerimiento para la transmisión del VPH. Las infecciones orales y digitales por VPH ocurren, y existe evidencia de que el contacto digital-genital y genital-...

  10. Economia del turismo: externalidades en el sector turistico

    OpenAIRE

    Duguine, Héctor

    2011-01-01

    Se aborda la problemática de las externalidades que genera el turismo. Este sector es una industria importante, en comparación con otras de la economía, requiere muchos recursos gratuitos o bienes públicos para poder satisfacer las necesidades y requerimientos de los turistas. La actividad turística puede incidir sobre terceros que no forman parte del mercado comprador-vendedor. Estas incidencias entre agentes pueden ser positivas y no se reciben pagos por las mismas o negativas y no se aplic...

  11. Determinantes en el proceso del despliegue del valor para la innovación

    Directory of Open Access Journals (Sweden)

    Juan Mejía Trejo

    2016-03-01

    Full Text Available El estudio tiene como objetivo hallar las determinantes en el proceso del despliegue del valor para la innovación de productos. la metodología, basada en investigación documental, descubre tres áreas: I: qfd modificado, donde se consideran las percepciones ponderadas del consumidor de necesidades, satisfacción y desempeño de los diferentes atributos y características de los productos y servicios a través de voces denominadas: del consumidor, la mercadotecnia, la tecnología, los requerimientos y la firma; área II: valorprecio y costo de retención del consumidor, en la que se calcula el precio justo del producto objetivo a innovar respecto de sus competidores y costo de retener al consumidor; área III: difusión de la innovación, que permite visualizar el mercado de adoptadores del producto objetivo a innovar. El proceso es posible visualizarlo en un solo plano, por lo que se propone su denominación como despliegue del valor para la innovación de productos (dvip.

  12. Reestructuración Organizacional del Centro Tecnológico Naval a través del levantamiento de perfiles por competencias, área: Vicerrectorado Académico, Departamentos: Docencia, Investigación y Vinculación con la colectividad.

    OpenAIRE

    Barona Valencia, Danny Wilfrido; Tkatchenko, Lioubov

    2010-01-01

    El presente trabajo propone mejorar la gestión académica y administrativa del Instituto Tecnológico Superior “Centro Tecnológico Naval” (CETNAV) a través de las siguientes líneas de acción: rediseñó del organigrama actual del CETNAV, acorde a los requerimientos establecidos por los organismos reguladores del Sistema Nacional de Educación Superior; definición de la nueva estructura organizacional de los departamentos de Docencia, Investigación y Vinculación con la Colectividad y levantamiento ...

  13. Aulas de inglés inclusivas: requerimientos, implicaciones y limitaciones. –Un estudio de caso-

    Directory of Open Access Journals (Sweden)

    Johanna Montaño

    2013-01-01

    Full Text Available Este artículo presenta los resultados de un estudio de caso que buscaba responder a las siguientes preguntas de investigación: ¿Cuáles son las percepciones que tiene la comunidad educativa de un centro educativo distrital acerca de la educación inclusiva en las aulas de inglés?, ¿Cuáles son los parámetros que esta escuela sigue para trabajar con aulas de inglés inclusivas? Y ¿Qué estrategias se utilizan en las aulas de inglés para responder a las necesidades individuales de los estudiantes? El estudio fue realizado durante ocho meses aproximadamente en el centro educativo en mención. Para realizar una descripción completa del proceso de inclusión en la institución se realizaron observaciones de clase, entrevistas a diferentes miembros de la comunidad educativa y se aplicaron cuestionarios a los estudiantes con necesidades educativas especiales y a sus docentes. Los hallazgos revelaron que aunque algunos pocos profesores utilizan estrategias personales para responder a las necesidades individuales de los estudiantes, hay aún muchos obstáculos que se constituyen en una barrera para el desarrollo exitoso de un proceso de inclusión y carencias que se deben atender y suplir.

  14. Estudio del proceso constructivo de cimentaciones de gravedad para eólica offshore

    OpenAIRE

    Solana Santillana, Borja

    2015-01-01

    RESUMEN: El objetivo de este proyecto es desarrollar el proceso constructivo de una cimentación de gravedad para eólica offshore. Al igual que en el otro proyecto, “Diseño de Cimentaciones en Gravedad para Eólica Offshore”, tras una revisión del estado del arte, y de los antecedentes existentes, se procede al estudio de los requerimientos de diseño, que pueden condicionar el proceso constructivo. Una vez conocidos los condicionantes y las características geométricas de la cimentación se...

  15. Controlling active cabin suspensions in commercial vehicles

    NARCIS (Netherlands)

    Evers, W.J.E.; Besselink, I.J.M.; Teerhuis, A.P.; Knaap, van der A.C.M.; Nijmeijer, H.

    2009-01-01

    The field of automotive suspensions is changing. Semi-active and active suspensions are starting to become viable options for vehicle designers. Suspension design for commercial vehicles is especially interesting given its potential. An active cabin suspension for a heavy-duty truck is considered,

  16. "Point de suspension"

    CERN Multimedia

    2004-01-01

    CERN - Globe of Science and Innovation 20 and 21 October Acrobatics, mime, a cappella singing, projections of images, a magical setting... a host of different tools of a grandeur matching that of the Universe they relate. A camera makes a massive zoom out to reveal the multiple dimensions of Nature. Freeze the frame: half way between the infinitesimally small and the infinitesimally large, a man suspends his everyday life (hence the title "Point de Suspension", which refers to the three dots at the end of an uncompleted sentence) to take a glimpse of the place he occupies in the great history of the Universe. An unusual perspective on what it means to be a human being... This wondrous show in the Globe of Science and Innovation, specially created by the Miméscope* company for the official ceremony marking CERN's fiftieth anniversary, is a gift from the Government of the Republic and Canton of Geneva, which also wishes to share this moment of wonder with the local population. There will be three perfo...

  17. "Point de suspension"

    CERN Multimedia

    2004-01-01

    http://www.cern.ch/cern50/ CERN - Globe of Science and Innovation 20 and 21 October Acrobatics, mime, a cappella singing, projections of images, a magical setting... a host of different tools of a grandeur matching that of the Universe they relate. A camera makes a massive zoom out to reveal the multiple dimensions of Nature. Freeze the frame: half way between the infinitesimally small and the infinitesimally large, a man suspends his everyday life (hence the title "Point de Suspension", which refers to the three dots at the end of an uncompleted sentence) to take a glimpse of the place he occupies in the great history of the Universe. An unusual perspective on what it means to be a human being... This wondrous show in the Globe of Science and Innovation, specially created by the Miméscope* company for the official ceremony marking CERN's fiftieth anniversary, is a gift from the Government of the Republic and Canton of Geneva, which also wishes to share this moment of wonder with the local pop...

  18. "Point de suspension"

    CERN Multimedia

    2004-01-01

    CERN - Globe of Science and Innovation 20 and 21 October Acrobatics, mime, a cappella singing, projections of images, a magical setting... a host of different tools of a grandeur matching that of the Universe they relate. A camera makes a massive zoom out to reveal the multiple dimensions of Nature. Freeze the frame: half way between the infinitesimally small and the infinitesimally large, a man suspends his everyday life (hence the title "Point de Suspension", which refers to the three dots at the end of an uncompleted sentence) to take a glimpse of the place he occupies in the great history of the Universe. An unusual perspective on what it means to be a human being... This spectacle in the Globe of Science and Innovation, specially created by the Miméscope* company for the official ceremony marking CERN's fiftieth anniversary, is a gift from the Government of the Republic and Canton of Geneva, which also wishes to share this moment of wonder with the local population. There will be three performances for...

  19. En defensa del periodismo profesional

    Directory of Open Access Journals (Sweden)

    Ángel Arrese

    2007-12-01

    Full Text Available No solo es una cuestión de defensa de la propia identidad del periodismo -que también lo es-; es un asunto de gran trascendencia pública, desde el punto de vista del buen funcionamiento de la sociedad. El periodismo tradicional esta siendo amenazado por infinidad de simulacros informativos, por eso, está en manos de los medios de siempre -mucho más que de los nuevos-, realizar esa transición y adaptación de la profesión a los requerimientos de los nuevos tiempos, superando la tentación de no hacer nada, o de dejarse llevar por la corriente. También es la responsabilidad de quienes se dedican a la formación de estos profesionales, en especial de la Universidad, que en la mayoría de los países se ha implicado seriamente en esa tarea. Hay mucho que mejorar y aprender del periodismo institucional porque las sociedades funcionan mejor si los ciudadanos tienen acceso a la información que ha sido recabada por personas bien entrenadas.

  20. Carta del Editor

    Directory of Open Access Journals (Sweden)

    Blasco Fernando Checa Montúfar

    2015-01-01

    Full Text Available En la sección Sociedad, mujer y comunicación, analiza, expone propuestas, experiencias novedosas y aportes teóricos en torno a la problemática de la discriminación de la mujer en el periodismo, pues pese a los avances de la causa femenina todavía perduran estereotipos y discrímenes en la organización y contenidos mediáticos. En Erotismo, Pornografía y Medios se establecen las diferencias entre los dos primeros términos. Señala que los medios son el escenario privilegiado de estas expresiones sexuales. Incluyen dos experiencias, una sobre radio erótica que busca recrear "el prohibido sonido del placer" y la otra una revista brasileña "El tercer sexo", caso inédito, que rompiendo tabúes, aparece para satisfacer los requerimientos informativos de los homosexuales de Brasil. Completan esta entrega con temas como: El mercado audiovisual latinoamericano; La información exterior en América Latina; Tumbas de papel, sobre los desaparecidos en la dictadura argentina; la ciencia como cultura; Variedades de la luz y el abandono.

  1. Influencia de la aplicación de vinaza en actividad y biomasa microbiana en un Entic Dystropept y un Fluventic haplustoll del Valle del Cauca, Colombia

    Directory of Open Access Journals (Sweden)

    Bonilla Correa Carmen Rosa

    2009-03-01

    Full Text Available Con la aplicación de vinaza, residuo de la producción de alcohol carburante a partir de la caña de azúcar, se evaluó el efecto sobre la actividad y biomasa microbiana del suelo y el suministro de K+ al cultivo de maíz dulce (Zea Mays en un Entic Dystropept y un Fluventic Haplustoll del Valle del Cauca, Colombia. Se utilizó un diseño completamente al azar con cuatro tratamientos y cinco repeticiones: T1 (100% requerimiento de K+ con KCl, T2 (100% requerimiento de K+ con vinaza, T3 (50% requerimiento de K+ con KCl +50% con vinaza y T4 (25% requerimiento de K+ con KCl +75% con vinaza. Se estimó biomasa microbiana por el método de fumigación-extracción. Se realizó análisis de varianza, prueba de comparación de medias, regresiones y correlaciones (SAS. Se presentaron diferencias significativas en la actividad y biomasa microbiana por época de muestreo y entre los diferentes muestreos; al final del cultivo el Entic Dystropept presentó el contenido más alto de biomasa microbiana-C en el T2, mientras que en el Fluventic Haplustoll fue en el T1. El menor qCO2 fue para el T2 del Entic Distropept y T1 del Fluventic Haplustoll, estos tratamientos presentaron mayor acumulación de biomasa en cada suelo respectivamente T2 (30 450 kg ha-1 y T1 (21 015.6 kg ha-1.

  2. Diseño de un sistema semiautomático para la extracción de gel de aloe vera; análisis integral del costo del ciclo de vida del equipo.

    Directory of Open Access Journals (Sweden)

    Wilmer Velilla Díaz

    2013-01-01

    Full Text Available En el presente artículo se aborda el proceso de selección de un diseño para la extracción de gel de aloe vera. Se propuso una metodología de diseño basada en pesos ponderados, en la que se implementó un diseño conceptual, donde se identificaron las especificaciones, requerimientos y métricas, acordes a las necesidades del sector. Se definieron los elementos funcionales y físicos del sistema. A través del software CAD SolidWorks se modelaron las alternativas. Se utilizaron catálogos para la selección de los accesorios y motores y con los parámetros de operación de estos se determinaron las capacidades de producción de cada máquina. Como resultado de la metodología se seleccionaron los dos diseños que cumplen en mayor grado con las funciones y requerimientos de productividad. A las alternativas seleccionadas se les realizó el análisis del costo de ciclo de vida para escoger la alternativa definitiva, a la cual se le calculó el retorno de la inversión, con el fin de validar su viabilidad económica.

  3. El impacto de la arquitectura del comercio urbano: los diferentes formatos arquitectónicos de venta al detalle y su repercusión medioambiental

    OpenAIRE

    Olaya Cotrino, Adriana Marcela

    2010-01-01

    El comercio urbano es el punto de conexión entre la producción y el consumo, el entorno a través del cual los flujos de productos transcurren desde su fabricación hasta las manos del consumidor. Y la arquitectura constituye el soporte físico de la actividad, el lugar en el cual se satisfacen los diferentes requerimientos funcionales necesarios para la comercialización de un producto. Desde los orígenes de la actividad (mediante la incorporación de sencillos elementos para la protección del...

  4. Voces y prácticas enfermeras: evolución del pensamiento enfermero a través de sus protagonistas

    OpenAIRE

    Ferrando Forés, Cristina; Ortega Pearson, Caterina; Franch Broch, Nuria; Martín Sánchez, Jessica; Gato Alcalá, Sara; Igual Segura, Judit; Martínez López, Cristina

    2012-01-01

    Desde mediados del siglo XX Enfermería ha desarrollado un cuerpo de conocimientos propio que la ha situado, como una disciplina más, en el espacio general de la Ciencia. Los avances científico-técnicos y las transformaciones sociales del mundo contemporáneo han condicionado cambios importantes en los estilos de vida y nuevos requerimientos en relación a los procesos de salud, enfermedad y atención sanitaria. La Enfermería, la ciencia del cuidado de la vida, no ha quedado al margen de estos ca...

  5. Reingeniería de los planes de control en Erco, basada en la técnica del AMEF

    OpenAIRE

    Arévalo Berrezueta, Pedro Mauricio

    2010-01-01

    Es una reestructuración de los planes de control de los subprocesos de la elaboración de llantas en ERCO, como respuesta a los requerimientos de los actuales Sistemas de Gestión de la Calidad de las empresas que como ERCO, tienen la política de la Mejora Continua ; es por eso que teniendo como base la técnica del AMEF (ANALISIS DEL MODO POTENCIAL DE FALLA Y SUS EFECTOS) se plantearon como objetivos: Optimizar los AMEF s y Planes de Control en ERCO; mejorar la calidad, confiabilidad y segurid...

  6. Estudio de vulnerabilidad a los fenómenos del ambiente natural.Caso: Departamento Pocito, San Juan, Argentina

    OpenAIRE

    Elsa Nacif, Nora; Espinosa, María del Pilar

    2013-01-01

    Este trabajo profundiza en conocimientos de orden conceptual y metodológico en el marco del desarrollo urbano territorial en zonas sísmicas. Su objetivo es estudiar y aplicar métodos de evaluación de vulnerabilidad, contemplando los condicionantes fundamentales del medio natural. Se presenta como caso de estudio el Departamento Pocito, de la provincia de San Juan, Argentina; pero sus principios y procedimientos metodológicos pueden adaptarse a los requerimientos de otras zonas de característi...

  7. Active Control of Suspension Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper some recent research on active control of very long suspension bridges, is presented. The presentation is based on research work at Aalborg University, Denmark. The active control system is based on movable flaps attached to the bridge girder. Wind load on bridges with or without...... flaps attached to the girder is briefly presented. A simple active control system is discussed. Results from wind tunnel experiments with a bridge section show that flaps can be used effectively to control bridge girder vibrations. Flutter conditions for suspension bridges with and without flaps...

  8. La formación personal del futuro profesor: Un estudio desde el enfoque radical e inclusivo y la ontología del lenguaje

    OpenAIRE

    Campusano Varas, Rosa Inés

    2016-01-01

    Tesis doctoral inédita leída en la Universidad Autónoma de Madrid, Facultad de Formación de Profesorado y Educación, Departamento de Didáctica y Teoría de la Educación. Fecha de lectura: 19 de febrero de 2016 Esta investigación analiza la formación del profesorado en Chile desde una perspectiva de la persona, y la necesidad de repensar los programas de formación inicial tomando en consideración los actuales requerimientos sociales, que nos indican que las competencias técnicas de los...

  9. Four-Wheel Vehicle Suspension System

    Science.gov (United States)

    Bickler, Donald B.

    1990-01-01

    Four-wheel suspension system uses simple system of levers with no compliant components to provide three-point suspension of chassis of vehicle while maintaining four-point contact with uneven terrain. Provides stability against tipping of four-point rectangular base, without rocking contact to which rigid four-wheel frame susceptible. Similar to six-wheel suspension system described in "Articulated Suspension Without Springs" (NPO-17354).

  10. Heavy vehicle pitch dynamics and suspension tuning

    OpenAIRE

    Cao, Dongpu; Rakheja, Subhash; Su, Chun-Yi

    2008-01-01

    The influence of suspension tuning of passenger cars on bounce and pitch ride performance has been explored in a number of studies, while only minimal efforts have been made for establishing similar rules for heavy vehicles. This study aims to explore pitch dynamics and suspension tunings of a two-axle heavy vehicle with unconnected suspension, which could also provide valuable information for heavy vehicles with coupled suspensions. Based on a generalised pitch-plane model of a two-axle heav...

  11. Suspension-Firing of Biomass

    DEFF Research Database (Denmark)

    Shafique Bashir, Muhammad; Jensen, Peter Arendt; Frandsen, Flemming

    2012-01-01

    This paper is the second of two papers, describing probe measurements of deposit buildup and removal (shedding), conducted in a 350 MWth suspension-fired boiler, firing straw and wood. Investigations of deposit buildup and shedding have been made by use of an advanced online deposit probe and a s...

  12. Suspension-Firing of Biomass

    DEFF Research Database (Denmark)

    Bashir, Muhammad Shafique; Jensen, Peter Arendt; Frandsen, Flemming

    2012-01-01

    This paper is Part 1 in a series of two describing probe measurements of deposit build-up and removal (shedding) in a 350 MWth suspension boiler, firing straw and wood. The influence of fuel type (straw share in wood), probe exposure time, probe surface temperature (500, 550, and 600 °C), and flu...

  13. Nonlinear models of suspension bridges

    Czech Academy of Sciences Publication Activity Database

    Malík, Josef

    2006-01-01

    Roč. 321, č. 2 (2006), s. 828-850 ISSN 0022-247X Institutional research plan: CEZ:AV0Z30860518 Keywords : suspension bridges * principle of minimum energy Subject RIV: BA - General Mathematics Impact factor: 0.758, year: 2006

  14. Fracture in Kaolinite clay suspensions

    Science.gov (United States)

    Kosgodagan Acharige, Sebastien; Jerolmack, Douglas J.; Arratia, Paulo E.

    2017-11-01

    Clay minerals are involved in many natural (landslides, river channels) and industrial processes (ceramics, cosmetics, oil recovery). They are plate shaped charged colloids and exhibit different flow properties than simpler colloids when suspended in a liquid such as thixotropy and shear-banding. kaolinite platelets are non-swelling, meaning that the stacks formed by the platelets do not have water layers, and thus the suspension does not have a sol-gel transition. However, it has been shown that kaolinite suspensions possesses a non-zero yield stress even at low concentrations, indicating that the particles arrange themselves in a structure through attractive interactions. Here, we experimentally investigate the sedimentation of kaolinite suspensions in a Hele-Shaw cell. The sedimentation of these dilute suspensions can display solid behavior like fracture, revealed in cross-polarized light, which is linked to the failure of the weakly-bonded structure (typical yield stress 10-2 Pa). By changing the interaction potential of the particles (by sonication or introducing salts), we show through these sedimentation experiments, how the fracture pattern can be avoided. Research was sponsored by the Army Research Laboratory and was accomplished under Grant Number 569074.

  15. 49 CFR 570.8 - Suspension systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Suspension systems. 570.8 Section 570.8 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY... Pounds or Less § 570.8 Suspension systems. (a) Suspension condition. Ball joint seals shall not be cut or...

  16. 49 CFR 570.61 - Suspension system.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Suspension system. 570.61 Section 570.61... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IN USE INSPECTION STANDARDS Vehicles With GVWR of More Than 10,000 Pounds § 570.61 Suspension system. (a) Suspension condition. Ball joint seals shall not be cut...

  17. Teoría de la información y ciencias humanas. Revisión del estatuto epistemológico del análisis de mensajes

    Directory of Open Access Journals (Sweden)

    JOSÉ LUIS PIÑUEL RAIGADA

    1981-01-01

    Full Text Available Es cuestionable si el análisis del discurso practicado en humanidades está epistemológicamente basado en una teoría y si esa teoría es la teoría de la comunicación. Después de una revisión de las ampliaciones epistemológicas de la teoría matemática de Sahnnon y su aplicación a las humanidades, y tras mostrar la dependencia del análisis de contenido y el análisis estructural-semiótico sobre la teoría del comportamiento y la teoría del lenguaje, respectivamente, se discuten los requerimientos epistemológicos para usar la teoría del análisis como el método natural de teoría de la comunicación. A la vista de esos requerimientos, la comunicación es considerada como una serie de interacciones en las cuales el procedimiento es el intercambio de información, lo que, a su vez, conduce a referirnos al modelo de Shanon sobre la dialéctica de la acción-comunicación en la interacción social.

  18. Suspensions with reduced violin string modes

    International Nuclear Information System (INIS)

    Lee, B H; Ju, L; Blair, D G

    2006-01-01

    We discuss the possibility of significantly reducing the number and Q-factor of violin string modes in the mirror suspension. Simulations of a bar-flexure suspension and an orthogonal ribbon have shown a reduction in the number of violin string modes when compared to a normal ribbon suspension. By calculating the expected suspension thermal noise, we find that the orthogonal ribbon provides a promising suspension alternative. A lower number of violin modes oscillating in the direction of the laser and a reduction in violin mode peak values of at least 23dB can be achieved with a slight increase in thermal noise above 40Hz

  19. Suspensions with reduced violin string modes

    Energy Technology Data Exchange (ETDEWEB)

    Lee, B H; Ju, L; Blair, D G [School of Physics, University of Western Australia, Crawley 6009, WA (Australia)

    2006-03-02

    We discuss the possibility of significantly reducing the number and Q-factor of violin string modes in the mirror suspension. Simulations of a bar-flexure suspension and an orthogonal ribbon have shown a reduction in the number of violin string modes when compared to a normal ribbon suspension. By calculating the expected suspension thermal noise, we find that the orthogonal ribbon provides a promising suspension alternative. A lower number of violin modes oscillating in the direction of the laser and a reduction in violin mode peak values of at least 23dB can be achieved with a slight increase in thermal noise above 40Hz.

  20. Efectos del entrenamiento interválico en personas con insuficiencia cardiaca

    OpenAIRE

    Rollán Díaz, Ibai

    2014-01-01

    El objetivo de esta revisión es conocer en profundidad la patología de la insuficiencia cardiaca (IC), así como el tratamiento de la misma a través del entrenamiento aeróbico interválico de alta intensidad (HIIT). La IC se define como el estado fisiopatológico y clínico en el cual el corazón es incapaz de aportar sangre de acuerdo a los requerimientos metabólicos periféricos o que lo hace con presiones de llenado elevadas (Jalil, 2012). Resulta de especial relevancia el tratamiento de dicha ...

  1. Creación del área de ventas y mercadeo para Industrias Leader Ltda.

    OpenAIRE

    Pérez Forero, Gabriel Stiven; Vargas Jiménez, Bibiana

    2016-01-01

    El departamento de mercadeo y ventas es fundamental en una empresa debido a que es el encargado de desarrollar e implementar estrategias que satisfagan las necesidades y requerimientos del cliente. Es aquí donde más se puede ver reflejado el aumento de las ventas de la empresa. El servicio al cliente, la relación con el mismo y el acompañamiento, es un tema muy importante a tratar, tanto para atraer a nuevos clientes como también para conservar a los clientes actuales. Este trabajo se desarro...

  2. CELDAS FOTOVOLTAICAS DE ALTA EFICIENCIA Y SISTEMA DE PANELES SOLARES DEL CUBESAT COLOMBIA 1

    Directory of Open Access Journals (Sweden)

    Jorge Enrique Salamanca Céspedes

    2013-01-01

    Full Text Available El presente documento presenta el resultado parcial de la investigación acerca de las tecnologías de celdas solares multijuntura para uso espacial. Asimismo, se presenta una recopilación de los pasos que se han seguido hasta la fecha en el diseño de un prototipo de paneles fotovoltaicos de acuerdo a los requerimientos físicos, eléctricos y financieros  del picosatélite Cubesat Colombia 1 de la Universidad Distrital Francisco José de Caldas.

  3. Formación del profesorado en la lengua y cultura indígena: una histórica demanda educativa en contexto Mapuche

    Directory of Open Access Journals (Sweden)

    Omar Turra

    2016-03-01

    Full Text Available Resumen Este artículo presenta resultados de una investigación que tuvo como propósito construir, junto al profesorado en ejercicio en contexto educativo y cultural Mapuche, los requerimientos que estos docentes demandan a las instituciones formadoras en función de las necesidades del contexto de desempeño. Los requerimientos actuales del profesorado se correlacionan, en perspectiva histórica, con las demandas levantadas por un grupo de profesores pertenecientes a este pueblo originario y testimoniado hacia los años 30 y 40 del siglo XX. La investigación se desarrolló desde una metodología de investigación social mixta, de carácter histórico para concentrar las demandas del profesorado Mapuche y desde la metodología comunicativa para levantar las demandas actuales del profesorado. Para este último caso también se implementó un diseño de investigación mixto, de tipología secuencial e integrada que utilizó distintas técnicas de recolección de información durante su desarrollo (cuestionario comunicativo, entrevista comunicativa y grupo de discusión comunicativo. Los resultados de ambos corpus de requerimientos confluyen en demandar un profesorado con formación en la lengua y cultura Mapuche, que le permita dar cuenta de las características culturales y lingüísticas del estudiantado originario que asiste al sistema escolar, es decir abogan por la presencia de un cuerpo docente con habilitación profesional para desarrollar procesos pedagógicos con pertinencia cultural.

  4. Chain Dynamics in Magnetorheological Suspensions

    Science.gov (United States)

    Gast, A. P.; Furst, E. M.

    1999-01-01

    Magnetorheological (MR) suspensions are composed of colloidal particles which acquire dipole moments when subjected to an external magnetic field. At sufficient field strengths and concentrations, the dipolar particles rapidly aggregate to form long chains. Subsequent lateral cross-linking of the dipolar chains is responsible for a rapid liquid-to-solid-like rheological transition. The unique, magnetically-activated rheological properties of MR suspensions make them ideal for interfacing mechanical systems to electronic controls. Additionally, the ability to experimentally probe colloidal suspensions interacting through tunable anisotropic potentials is of fundamental interest. Our current experimental work has focused on understanding the fluctuations of dipolar chains. It has been proposed by Halsey and Toor (HT) that the strong Landau-Peierls thermal fluctuations of dipolar chains could be responsible for long-range attractions between chains. Such interactions will govern the long-time relaxation of MR suspensions. We have synthesized monodisperse neutrally buoyant MR suspensions by density matching stabilized ferrofluid emulsion droplets with D2O. This allows us to probe the dynamics of the dipolar chains using light scattering without gravitational, interfacial, and polydispersity effects to resolve the short-wavelength dynamics of the dipolar chains. We used diffusing wave spectroscopy to measure these dynamics. The particle displacements at short times that show an independence to the field strength, but at long times exhibit a constrained, sub-diffusive motion that slows as the dipole strength is increased. The experiments are in good qualitative agreement with Brownian dynamics simulations of dipolar chains. Although there have been several important and detailed studies of the structure and interactions in MR suspensions, there has not been conclusive evidence that supports or contradicts the HT model prediction that long-range interactions exist between

  5. Particle Suspension Mechanisms - Supplemental Material

    Energy Technology Data Exchange (ETDEWEB)

    Dillon, M B

    2011-03-03

    This supplemental material provides a brief introduction to particle suspension mechanisms that cause exfoliated skin cells to become and remain airborne. The material presented here provides additional context to the primary manuscript and serves as background for designing possible future studies to assess the impact of skin cells as a source of infectious aerosols. This introduction is not intended to be comprehensive and interested readers are encouraged to consult the references cited.

  6. Robust Tensioned Kevlar Suspension Design

    Science.gov (United States)

    Young, Joseph B.; Naylor, Bret J.; Holmes, Warren A.

    2012-01-01

    One common but challenging problem in cryogenic engineering is to produce a mount that has excellent thermal isolation but is also rigid. Such mounts can be achieved by suspending the load from a network of fibers or strings held in tension. Kevlar fibers are often used for this purpose owing to their high strength and low thermal conductivity. A suite of compact design elements has been developed to improve the reliability of suspension systems made of Kevlar.

  7. Polymorphism in Bacterial Flagella Suspensions

    Science.gov (United States)

    Schwenger, Walter J.

    Bacterial flagella are a type of biological polymer studied for its role in bacterial motility and the polymorphic transitions undertaken to facilitate the run and tumble behavior. The naturally rigid, helical shape of flagella gives rise to novel colloidal dynamics and material properties. This thesis studies methods in which the shape of bacterial flagella can be controlled using in vitro methods and the changes the shape of the flagella have on both single particle dynamics and bulk material properties. We observe individual flagellum in both the dilute and semidilute regimes to observe the effects of solvent condition on the shape of the filament as well as the effect the filament morphology has on reptation through a network of flagella. In addition, we present rheological measurements showing how the shape of filaments effects the bulk material properties of flagellar suspensions. We find that the individual particle dynamics in suspensions of flagella can vary with geometry from needing to reptate linearly via rotation for helical filaments to the prevention of long range diffusion for block copolymer filaments. Similarly, for bulk material properties of flagella suspensions, helical geometries show a dramatic enhancement in elasticity over straight filaments while block copolymers form an elastic gel without the aid of crosslinking agents.

  8. Estado del Arte: El Banco Central de Estados Unidos a sus 100 años

    Directory of Open Access Journals (Sweden)

    Jane D'Arista

    2013-09-01

    Full Text Available La creencia en la hipótesis de los mercados eficientes y la adopción de requerimientos de capital para los bancos como la mejor herramienta macroprudencial compatible con las fuerzas del mercado, reemplazó el compromiso previo de la Reserva Federal (Fed de emplear la conexión entre las operaciones de mercado abierto y los cambios en los requerimientos de reservas para limitar el crédito. Desde que se cortó esta palanca sobre la oferta crediticia, el banco central ha dependido de las operaciones de mercado abierto para lograr solamente un objetivo: influir sobre la demanda de crédito cambiando la tasa de referencia de corto plazo. La desequilibrada caja de herramientas contribuyó a un sesgo procíclico en los resultados de sus políticas que reflejó y exacerbó el sesgo procíclico del sistema financiero. El fracaso de evaluar y fortalecer sus herramientas monetarias ha socavado la habilidad de la Fed para restaurar el crecimiento económico y evitar otra crisis financiera. La traducción del inglés al español es de Wesley Marshall y Eugenia Correa.

  9. Diseño del mecanismo de sellado de cajas en la instalación de empaquetamiento y envasado de una industria alimentaria

    OpenAIRE

    García Martínez, Mario

    2015-01-01

    El presente proyecto tiene por objeto el diseño de un sistema capaz de sellar bolsas de caramelos para su implantación en la industria. Con dicho fin se diseña una máquina termo-selladora que cumpla con los requerimientos del tutor del proyecto o, por extensión, de un posible contratista. Se establece que el producto está completamente elaborado y que se ha de incluir en unas bolsas que previamente tienen que ser conformadas para finalmente sellar el envase. Se trata de un cara...

  10. Comunicaciones para la formación de las islas eléctricas del Sistema Argentino de Interconexión

    OpenAIRE

    Issouribehere, Pedro; Rodríguez, José; Gutiérrez, Alfredo

    2003-01-01

    El Sistema de Comunicaciones descripto tiene por misión dar soporte al “Proyecto Islas Eléctricas del Sistema Argentino de Interconexión”. Etapa I. Se presenta la definición de un Sistema de Referencia que permite caracterizar en forma general los requerimientos del Sistema de Telecomunicaciones y Teleprotección con el objetivo de estimar un costo mínimo justificable para la aplicación y un plazo acorde en su ejecución.

  11. Diseño de recursos didácticos visuales para el desarrollo de habilidades comunicativas del idioma Inglés de los estudiantes de bachillerato

    OpenAIRE

    Yugla Lema, Lidia Rebeca

    2015-01-01

    1. Introducción.--2.Planteamiento de la propuesta de trabajo.--3.Marco Teórico.--4. Metodología.--5.Resutados.--6.Conclusiones y recomendaciones.-- El diseño de recursos didácticos visuales para el desarrollo de habilidades comunicativas del idioma inglés en el bachillerato tuvo la finalidad de conocer los requerimientos de los estudiantes y docentes dentro del proceso de enseñanza aprendizaje para generar interacción con otros elementos didácticos a fin de propiciar situaciones verbales e...

  12. Aspectos nutricionales del búfalo

    Directory of Open Access Journals (Sweden)

    André Mendes Jorge

    2011-11-01

    Full Text Available Los búfalos son animales herbívoros y, a pesar de años de domesticación, aún poco se sabe acerca de los requisitos nutricionales esta especie. La mayoría de los búfalos son criados por los pequeños productores, salvo en los países donde la actividad tiene mayor importancia (Italia, Siria, América del Sur. Los búfalos de río proporcionan la mayoría de la leche producida en la India y en muchos países tropicales.Los requerimientos nutricionales de las búfalas lecheras pueden diferir de los bovinos lecheros de los países templados, principalmente por a las diferencias en las condiciones climáticas, la calidad de los alimentos e incluso en la eficiencia del uso de los nutrientes. Sabiendo de las características cualitativas de la leche de la búfala, muchos productores de bovinos lecheros tienen en sus propiedades, dos o tres cabezas de búfalas en el rebaño, haciendo una mezcla de leches de ambas especies en un nivel aceptable por las leyes locales, con el fin de mejorar las características físicas de la leche producida.Los patrones de alimentación adecuados para los búfalos no están claramente definidos y existen grandes diferencias (hasta de un 40% en los requerimientos nutricionales prescritos por los diferentes patrones de alimentación. La mayoría de las normas existentes para búfalos (Sen et al 1978; Kearl, 1982, Pathak y Verma, 1993 se basa en uno o solo unos pocos intentos de alimentación.Debido al pequeño y retringuido banco de datos, estas normas no reflejan las necesidades de las diferentes etapas de la nutrición pero la calidad de los alimentos o la variación de las necesidades de cada animal en condiciones tropicales.Para el uso eficiente de los nutrientes de la dieta y también para la máxima explotación del potencial genético, los nutrientes necesarios por el animal deben estar presentes en cantidades óptimas y balanceadas. El requerimiento de un determinado nutriente es la cantidad del nutriente

  13. Attractive and repulsive magnetic suspension systems overview

    Science.gov (United States)

    Cope, David B.; Fontana, Richard R.

    1992-01-01

    Magnetic suspension systems can be used in a wide variety of applications. The decision of whether to use an attractive or repulsive suspension system for a particular application is a fundamental one which must be made during the design process. As an aid to the designer, we compare and contrast attractive and repulsive magnetic suspension systems and indicate whether and under what conditions one or the other system is preferred.

  14. Introducing Dual Suspension System in Road Vehicles

    OpenAIRE

    Imtiaz Hussain; Jawaid Daudpoto; Ali Asghar Memon

    2013-01-01

    The main objective of suspension system is to reduce the motions of the vehicle body with respect to road disturbances. The conventional suspension systems in road vehicles use passive elements such as springs and dampers to suppress the vibrations induced by the irregularities in the road. But these conventional suspension systems can suppress vibrations to a certain limit. This paper presents a novel idea to improve the ride quality of roads vehicles without compromising vehicle?s stability...

  15. Time Varying Behavior of the Loudspeaker Suspension

    DEFF Research Database (Denmark)

    Pedersen, Bo Rohde; Agerkvist, Finn T.

    2007-01-01

    The suspension part of the electrodynamic loudspeaker is often modelled as a simple linear spring with viscous damping, however the dynamic behaviour of the suspension is much more complicated than predicted by such a simple model. At higher levels the compliance becomes non-linear and often chan...... changes during excitation at high levels. This paper investigates how the compliance of the suspension depends on the excitation, i.e. level and frequency content. The measurements are compared with other known measurement methods of the suspension....

  16. Introducing Dual Suspension System in Road Vehicles

    Directory of Open Access Journals (Sweden)

    Imtiaz Hussain

    2013-04-01

    Full Text Available The main objective of suspension system is to reduce the motions of the vehicle body with respect to road disturbances. The conventional suspension systems in road vehicles use passive elements such as springs and dampers to suppress the vibrations induced by the irregularities in the road. But these conventional suspension systems can suppress vibrations to a certain limit. This paper presents a novel idea to improve the ride quality of roads vehicles without compromising vehicle?s stability. The paper proposes the use of primary and secondary suspension to suppress the vibrations more effectively.

  17. Análisis de una empresa del sector turístico Restaurante El Olivar

    Directory of Open Access Journals (Sweden)

    Daniel Francisco Calderón Cifuentes

    2013-11-01

    Full Text Available En la Facultad de Administración de Empresas Turísticas y Hoteleras de la Universidad Externado de Colombia, se realiza un proyecto integrador de todos los espacios académicos competentes en la Facultad. El objetivo principal del proyecto varía cada semestre y en este caso tiene el fin de analizar una empresa del sector turístico, desde su organización y funcionamiento. En esta ocasión la organización con enfoque administrativo seleccionada para el desarrollo del proyecto fue el Restaurante El Olivar. Los resultados obtenidos han sido plenamente satisfactorios, demostrando las características que necesita una organización para ser exitosa y los requerimientos indispensables para llegar a ser un excelente administrador. Así mismo, se logró tener un acercamiento al funcionamiento de la industria turística y comercial de Bogotá.

  18. Notas críticas sobre la ética religiosa del trabajo en el Opus Dei

    Directory of Open Access Journals (Sweden)

    Antoni Jesús Aguiló Bonet

    2009-07-01

    Full Text Available El objetivo de este artículo es el de realizar una exposición crítica de los principales contenidos de la ética religiosa del trabajo del Opus Dei, basada en la concepción del trabajo como requerimiento divino y la doctrina de la santificación personal por medio de la actividad profesional diaria. El análisis revela la existencia de una ética de virtuosos que equipara la santidad y la perfección espiritual con el éxito social y el liderazgo profesional. Para ello adopta, en nombre de la santidad, estrategias instrumentales de acción que chocan frontalmente con la práctica y los principios del cristianismo emancipador.

  19. Modelización de la dependencia del número de siniestros. Aplicación a Solvencia II

    OpenAIRE

    Castañer, Anna

    2016-01-01

    En este trabajo se estudia el efecto de la dependencia entre dos subcarteras en el requerimiento de capital obligatorio (SCR) por primas y reservas en una cartera de seguros no vida. Para ello, la dependencia se establece entre el número de siniestros de cada subcartera, que se modeliza mediante un choque común. A continuación, se plantean diversas opciones para el cálculo de la distribución del coste total en la cartera agregada, obteniéndose fórmulas explícitas en algunos casos. Finalmente,...

  20. Eliminación de llantas de acabado imperfecto Compañía Ecuatoriana del Caucho S.A.

    OpenAIRE

    Sacoto Castillo, Pablo

    2002-01-01

    En 1998 la Compañía Ecuatoriana del Caucho fue auditada y reconocida con la Certificación Internacional de Calidad ISO 9002, otorgada por el Instituto Colombiano de Normas Técnicas y Certificación, INCONTEC. También en el año 2000 obtuvo la Certificación QS 9000 que es un requerimiento para la industria automotriz y que le califica a la compañía como abastecedor de Equipo Original para General Motors tanto en el mercado ecuatoriano como en otros.

  1. 36 CFR 296.10 - Suspension and revocation of permits.

    Science.gov (United States)

    2010-07-01

    ... AGRICULTURE PROTECTION OF ARCHAEOLOGICAL RESOURCES: UNIFORM REGULATIONS § 296.10 Suspension and revocation of... correct the situation which led to suspension of the permit. (b) Suspension or revocation for management...

  2. Design analysis of formula student race car suspension system

    Science.gov (United States)

    Wirawan, Julian Wisnu; Ubaidillah, Aditra, Rama; Alnursyah, Rafli; Rahman, Rizki Abdul; Cahyono, Sukmaji Indro

    2018-02-01

    Design analysis of suspension especially for racecar suspension is very crucial to achieve maximum performance and handling. Suspension design may vary depending on the road terrain and the vehicle purpose itself, such as high speed or off-road vehicle. This paper focused on the suspension which used for racecar vehicle. The suspension type used was unequal double wishbone. This model is used because of its stability for high-speed usage compared to another kind of suspension. The suspension parameter was calculated to achieve desired performance. The result is the motion ratio of the designed suspension geometry. The obtained value of motion ratio was 1:2 for front suspension and 1:1 for the rear suspension. These calculation result the front suspension is still too soft, which the optimal motion ratio should be kept around 1:1 for better handling. This problem caused by the lack of space for suspension linkage.

  3. 39 CFR 320.9 - Revocation or amendment of suspensions.

    Science.gov (United States)

    2010-07-01

    ... SUSPENSION OF THE PRIVATE EXPRESS STATUTES § 320.9 Revocation or amendment of suspensions. These suspensions... of operations (in dollar or volume terms, whichever is larger) lower than that antedating the...

  4. Linear viscoelastic properties of aging suspensions

    NARCIS (Netherlands)

    Purnomo, E.H.; Purnomo, E.H; van den Ende, Henricus T.M.; Mellema, J.; Mugele, Friedrich Gunther

    2006-01-01

    We have examined the linear viscoelastic behavior of poly-N-isopropylacrylamide (PNIPAM) microgel suspensions in order to obtain insight in the aging processes in these densely packed suspensions at various temperatures below the volume transition temperature. The system is found to display a strong

  5. 49 CFR 393.207 - Suspension systems.

    Science.gov (United States)

    2010-10-01

    ... braking system. The vehicle shall be level (not tilting to the left or right). Air leakage shall not be... 49 Transportation 5 2010-10-01 2010-10-01 false Suspension systems. 393.207 Section 393.207... NECESSARY FOR SAFE OPERATION Frames, Cab and Body Components, Wheels, Steering, and Suspension Systems § 393...

  6. 41 CFR 105-74.670 - Suspension.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Suspension. 105-74.670 Section 105-74.670 Public Contracts and Property Management Federal Property Management Regulations System...-GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Definitions § 105-74.670 Suspension...

  7. 36 CFR 25.3 - Supervision; suspensions.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Supervision; suspensions. 25.3 Section 25.3 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR NATIONAL MILITARY PARKS; LICENSED GUIDE SERVICE REGULATIONS § 25.3 Supervision; suspensions. (a) The guide service will operate under the direction...

  8. Osmotic consolidation of suspensions and gels

    International Nuclear Information System (INIS)

    Miller, K.T.; Zukoski, C.F.

    1994-01-01

    An osmotic method for the consolidation of suspensions of ceramic particles is demonstrated. Concentrated solutions of poly(ethylene oxide) are separated from a suspension of ceramic particles by a semipermeable membrane, creating a gradient in solvent chemical potential. Solvent passes from the suspension into the polymer solution, lowering its free energy and consolidating the suspension. Dispersions of stable 8-nm hydrous zirconia particles were consolidated to over 47% by volume. Suspensions of α-alumina in three states of aggregation (dispersed, weakly flocculated, and strongly flocculated) were consolidated to densities greater than or equal to those produced in conventional pressure filtration. Moreover, the as-consolidated alumina bodies were partially drained of fluid during the osmotic consolidation process, producing cohesive partially dried bodies with improved handling characteristics

  9. Gestión de proyecto de software: un método basado en gamificación para mejorar la calidad del producto y desempeño de equipos de desarrollo

    OpenAIRE

    Bianciotti, María Soledad; Salgado, Carlos Humberto; Sánchez, Alberto; Peralta, Mario

    2017-01-01

    El desarrollo o la implantación de software surgen para dar respuesta a alguna necesidad de la organización. Cuando la satisfacción del requerimiento implica el desarrollo o implementación de un software de mediana o gran complejidad se necesita, habitualmente, de la formación de un equipo de trabajo integrado por varias personas, cada una de las cuales intervendrá en una o varias fases del proyecto. Mantener ese grupo de personas comprometidas y motivadas para trabajar conjuntamente es un...

  10. Elaboración y aplicación de un manual para estudiantes de la UPS Sede Cuenca, con aspectos relacionados a un correcto desenvolvimiento dentro del proceso de una entrevista laboral, jul/2011-dic/2011

    OpenAIRE

    Delgado Quispe, Ximena Alexandra

    2011-01-01

    El producto intitulado "Elaboración y aplicación de un manual para estudiantes de la UPS - Sede Cuenca, con aspectos relacionados a un correcto desenvolvimiento dentro del proceso de una Entrevista Laboral", contiene temas exclusivamente relacionados con información muy útil y actualizada, para los estudiantes y futuros profesionales, acerca de todos los requerimientos que dentro del ámbito laboral se exige, dada la tecnología y el entorno altamente competitivo en el que nos desenvolvemos, se...

  11. Modelo de gestión para establecer elementos básicos de marketing mix e indicadores financieros y estratégicos del mercado asegurador de la ciudad de Quito en el ramo de vehículos

    OpenAIRE

    Martínez Núñez, Santiago Xavier

    2011-01-01

    355 hojas : ilustraciones, 29 x 21 cm + CD-ROM 3494 El presente estudio está dirigido a establecer elementos básicos del marketing mix e indicadores financieros y estratégicos del mercado, que permitan a las aseguradoras definir planes estratégicos conforme las necesidades y requerimientos. El enfoque de investigación fue dirigido al mercado automotriz, aseguradoras e información gubernamental mediante una metodología cualitativa y cuantitativa que permita establecer el valor de marca, nec...

  12. Clogging in constricted suspension flows

    Science.gov (United States)

    Marin, Alvaro; Lhuissier, Henri; Rossi, Massimiliano; Kähler, Christian J.

    2018-02-01

    The flow of a charged-stabilized suspension through a single constricted channel is studied experimentally by tracking the particles individually. Surprisingly, the behavior is found to be qualitatively similar to that of inertial dry granular systems: For small values of the neck-to-particle size ratio (D /d reported for granular systems and agree for moderate particle volume fraction (ϕ ≈20 % ) with a simple stochastic model for the number of particles at the neck. For larger neck sizes (D /d >3 ), even at the largest ϕ (≈60 %) achievable in the experiments, an uninterrupted particle flow is observed, which resembles that of an hourglass. This particularly small value of D /d (≃3 ) at the transition to a practically uninterrupted flow is attributed to the low effective friction between the particles, achieved by the particle's functionalization and lubrication.

  13. Next Generation Suspension Dynamics Algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Schunk, Peter Randall [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Higdon, Jonathon [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chen, Steven [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-12-01

    This research project has the objective to extend the range of application, improve the efficiency and conduct simulations with the Fast Lubrication Dynamics (FLD) algorithm for concentrated particle suspensions in a Newtonian fluid solvent. The research involves a combination of mathematical development, new computational algorithms, and application to processing flows of relevance in materials processing. The mathematical developments clarify the underlying theory, facilitate verification against classic monographs in the field and provide the framework for a novel parallel implementation optimized for an OpenMP shared memory environment. The project considered application to consolidation flows of major interest in high throughput materials processing and identified hitherto unforeseen challenges in the use of FLD in these applications. Extensions to the algorithm have been developed to improve its accuracy in these applications.

  14. Graphite suspension in carbon dioxide

    International Nuclear Information System (INIS)

    Roche, R.

    1965-01-01

    Since 1963 the Atomic Division of SNECMA has been conducting, under a contract with the CEA, an experimental work with a two-component fluid comprised of carbon dioxide and small graphite particles. The primary purpose was the determination of basic engineering information pertaining to the stability and the flowability of the suspension. The final form of the experimental loop consists mainly of the following items: a light-phase compressor, a heavy-phase pump, an electrical-resistance type heater section, a cooling heat exchanger, a hairpin loop, a transparent test section and a separator. During the course of the testing, it was observed that the fluid could be circulated quite easily in a broad range of variation of the suspension density and velocity - density from 30 to 170 kg/m 3 and velocity from 2 to 24 m/s. The system could be restarted and circulation maintained without any difficulty, even with the heavy-phase pump alone. The graphite did not have a tendency to pack or agglomerate during operation. No graphite deposition was observed on the wall of the tubing. A long period run (250 hours) has shown the evolution of the particle dimensions. Starting with graphite of surface area around 20 m 2 /g (graphite particles about 1 μ), the powder surface area reaches an asymptotic value of 300 m 2 /g (all the particles less than 0.3 μ). Moisture effect on flow stability, flow distribution between two parallel channels, pressure drop in straight tubes, recompression ratio in diffusers were also investigated. (author) [fr

  15. Factores que impiden el crecimiento socio económico de la corporación de producción y comercialización agrícola porvenir Valle del Chota en la comunidad de Chota cantón Ibarra; Diseño de un modelo administrativo financiero-contable para la corporación de producción y comercialización ''Porvenir Valle del Chota'', en el 2014.

    OpenAIRE

    Espinel Ponce, Edison Wilman

    2015-01-01

    Determinar la situación administrativa y financiera actual de la ''Corporación de Producción y Comercialización Agrícola Porvenir Valle del Chota'' con la finalidad de conocer y comprender el funcionamiento de la Corporación. Diseñar un modelo administrativo financiero, con políticas y procedimientos acorde a los requerimientos de la Corporación de Producción y Comercialización Agrícola ''Porvenir Valle del Chota'', con la finalidad de apoyar su desarrollo. El presente trabajo busca det...

  16. Precio y manejo del agua urbana en México

    Directory of Open Access Journals (Sweden)

    Gregorio Castro Rosales

    2015-01-01

    Full Text Available Este trabajo propone evaluar el potencial del precio que pagan los usuarios como ins - trumento para el manejo de la demanda urbana de agua en México. Nuestros resulta - dos basados en un análisis de datos provenientes de cientos de organismos operadores de agua potable del país, revelan que la demanda de agua sí es sensible al precio, tal y como se ha señalado en otros estudios. No obstante, encontramos también que la demanda es aún mucho más sensible al efecto del crecimiento poblacional y económi - co. Por lo tanto, considerando la dinámica demográfica, urbana y económica del país, un aumento en el precio del agua en sí no podría contribuir significativamente a la estabilización de los requerimientos nacionales de extracción de agua para uso urbano. Además, nuestro análisis de los determinantes del precio del agua urbana revela que los organismos operadores pasan sistemáticamente el costo de sus ineficiencias técnicas y financieras a los usuarios, por lo que un aumento en el precio del agua tampoco podría contribuir al saneamiento de sus finanzas. Concluimos que para un manejo efectivo, eficiente y sustentable del uso urbano de agua, resulta imprescindible un cambio de fondo en la manera en que operan los sistemas urbanos de agua.

  17. Naratriptan hydrochloride in extemporaneosly compounded oral suspensions.

    Science.gov (United States)

    Zhang, Y P; Trissel, L A; Fox, J L

    2000-01-01

    The purpose of this study was to determine the pharmaceutical acceptability and chemical stability of naratriptan hydrochloride in three extemporaneously compounded suspension formulations. The naratriptan-hydrochloride oral suspensions were prepared from 2.5-mg commercial tablets yielding a nominal naratriptan concentration of 0.5 mg/mL. The suspension vehicles selected for testing were Syrpalta, an equal-parts mixture of Ora-Plus and Ora-Sweet, and an equal-parts mixture of Ora-Plus and Ora-Sweet SF. The tablets were crushed and thoroughly triturated to a fine powder using a porcelain mortar and pestle. The powder was incorporated into a portion of the Syrpalta or Ora-Plus suspension vehicle and mixed until homogeneous. The mixtures were then brought to volume with Syrpalta, Ora-Sweet or Ora-Sweet SF, as appropriate. The suspensions were packaged in amber, plastic, screw-cap prescription bottles and stored at 23 deg C for seven days and 4 deg C for 90 days. An adequate suspension was never achieved in Syrpalta. The crushed-tablet powder did not produce a uniformly dispersed mixture and exhibited clumping and a high rate of sedimentation. A distinct layer of the solid tablet material settled immediately after shaking. Over the next four hours, a densely packed, yellow, caked layer formed at the bottom of the containers, making resuspension difficult. During storage, the caking became worse. Chemical analysis was not performed. The Ora-Plus and Ora-Sweet or Ora-Sweet SF suspensions had a slight greenish cast and were resuspended without difficulty by shaking for approximately ten seconds, yielding easily poured and homogeneous mixtures throughout the study. Visible settling and layering did not begin for four hours with the Ora-Sweet suspension and 24 hours for the Ora-Sweet SF suspension. High pressure liquid chromatographic analysis found that the naratriptan concentration in both suspension-vehicle combinations exhibited little or no loss for seven days at 23

  18. Self-powered suspension criterion and energy regeneration implementation scheme of motor-driven active suspension

    Science.gov (United States)

    Yan, Shuai; Sun, Weichao

    2017-09-01

    Active suspension systems have advantages on mitigating the effects of vehicle vibration caused by road roughness, which are one of the most important component parts in influencing the performances of vehicles. However, high amount of energy consumption restricts the application of active suspension systems. From the point of energy saving, this paper presents a self-powered criterion of the active suspension system to judge whether a motor-driven suspension can be self-powered or not, and then a motor parameter condition is developed as a reference to design a self-powered suspension. An energy regeneration implementation scheme is subsequently proposed to make the active suspension which has the potential to be self-powered achieve energy-saving target in the real application. In this implementation scheme, operating electric circuits are designed based on different working status of the actuator and power source and it is realizable to accumulate energy from road vibration and supply energy to the actuator by switching corresponding electric circuits. To apply the self-powered suspension criterion and energy regeneration implementation scheme, an active suspension system is designed with a constrained H∞ controller and calculation results indicate that it has the capability to be self-powered. Simulation results show that the performances of the self-powered active suspension are nearly the same as those of the active suspension with an external energy source and can achieve energy regeneration at the same time.

  19. Characterization of cell suspensions from solid tumors

    International Nuclear Information System (INIS)

    Pallavicini, M.

    1985-01-01

    The desirable features of cells in suspension will necessarily be dependent upon the use for which the cells were prepared. Adequate cell yield or recovery is defined by the measurement to be performed. Retention of cellular morphology is important for microscopic identification of cell types in a heterogenous cell suspension, and may be used to determine whether the cells in suspension are representative of those in the tumor in situ. Different dispersal protocols may yield cells with different degrees of clonogenicity, as well as altered biochemical features, such as loss of cellular proteins, surface antigens, nucleotide pools, etc. The quality of the cell suspension can be judged by the degree of cell clumping and level of cellular debris, both of which impact on flow cytometric measurements and studies in which the number of cells be known accurately. Finally, if the data measured on the cells in suspension are to be extrapolated to phenomena occurring in the tumor in situ, it is desirable that the cells in suspension are representative of those in the solid tumor in vivo. This report compares characteristics of tumor cell suspensions obtained by different types of selected disaggregation methods. 33 refs., 2 figs., 4 tabs

  20. El registro de los estudios observacionales: es el momento de cumplir el requerimiento de la Declaración de Helsinki

    Directory of Open Access Journals (Sweden)

    Rafael Dal-Ré

    2015-05-01

    Full Text Available El sesgo de publicación es una grave deficiencia del actual sistema de comunicación de los resultados de estudios de investigación en seres humanos. Los investigadores clínicos saben que, desde el punto de vista ético, deben inscribir los ensayos clínicos antes de su inicio en un registro público. Se entiende que este hecho ayudará a reducir el sesgo de publicación. Sin embargo, la mayor parte de los estudios en seres humanos son de tipo observacional y no de tipo experimental. Se estima que se han registrado menos del 2% de los 2 millones de estudios observacionales concluidos o en curso. La revisión de 2013 de la Declaración de Helsinki exige el registro de todo estudio de investigación en seres humanos, sus muestras o datos identificables. Se propone que los agentes financiadores, como el Fondo de Investigaciones Sanitarias, requieran el registro de los estudios observacionales para proveer la financiación. Las empresas deberían hacer lo propio. Así mismo, se propone que los comités de ética de la investigación, que cumpliendo la regulación española utilizan desde 1990 la Declaración como marco de referencia para evaluar los aspectos éticos de los ensayos clínicos con medicamentos, hagan lo mismo con los estudios observacionales del ámbito sanitario; deberían, por tanto, exigir el registro del estudio antes de otorgar su aprobación definitiva. Esto permitiría educar a los investigadores de estudios observacionales en el cumplimiento de un requisito ético de reciente introducción en el código ético de mayor relevancia en la realización de investigaciones en seres humanos.

  1. Requerimientos para el diseño de una metodología que permita estimar el valor de pasivos ambientales mineros

    OpenAIRE

    Arango Aramburo, Marcela

    2011-01-01

    Los pasivos ambientales mineros (PAM) son la obligación económica asociada con los impactos ambientales no remediados de una operación minera abandonada. En Colombia no se han reglamentado los PAM, pero dada la antigüedad y la prevalencia de la informalidad en la explotación minera, el interés en definir, reglamentar y gestionar estas obligaciones es creciente. Una parte importante del manejo de los pasivos ambientales mineros es su valoración. Por medio de la valoración, se puede estimar...

  2. Germinación y dormancia de arbustos y trepadoras del bosque siempreverde de la Sierra del Rosario, Cuba

    Directory of Open Access Journals (Sweden)

    J. A Sánchez

    Full Text Available Se determinaron los requerimientos germinativos y las clases de dormancia seminal en 14 especies de arbustos y 16 trepadoras (13 enredaderas y tres lianas, del bosque siempreverde estacional tropical de la Reserva de la Biosfera Sierra del Rosario, Cuba. También se evaluaron las relaciones entre las clases de dormancia y otros rasgos de historia de vida de las plantas. Los experimentos de germinación se realizaron en condiciones controladas de laboratorio (luz y temperatura: una temperatura constante de 25 ºC, tres condiciones de temperatura alterna (25/30 ºC, 25/35 ºC y 25/40 ºC y dos ambientes lumínicos (luz y oscuridad. En los arbustos, la luz fue el principal factor que reguló la germinación; mientras que en las trepadoras los factores experimentados no afectaron significativamente la germinación en su totalidad, aunque algunas tuvieron una respuesta especie-específica. Solo dos especies fueron totalmente fotoblásticas positivas, y la germinación a la luz disminuyó con la masa fresca de la semilla. La dormancia ocurrió en 23 especies (76,6 %, de ellas 10 eran arbustos y 13, trepadoras. En los arbustos la dormancia fisiológica fue la más abundante, y en las trepadoras predominaron la fisiológica y la física. Entre las trepadoras se hallaron las únicas especies con dormancia morfológica y/o morfofisiológica. El mayor número de semillas dormantes se encontró en la estación seca (87 %. El estudio confirmó la diversidad de mecanismos de dormancia y requerimientos germinativos ya reportados en estas formas de vida para el trópico.

  3. Response of tomato to different concentrations of nutrients Respuesta del tomate chonto cultivar Unapal Maravilla,

    Directory of Open Access Journals (Sweden)

    Mejía de Tafur Maria Sara

    2007-06-01

    Full Text Available In the greenhouse of the Universidad Nacional de Colombia at Palmira branch an experiment to determine the nutritional requirements of tomato UNAPAL Maravilla under hidroponic system, using reactive degree salts and distilled water was carried out. The data demonstrated that the suitable stage of development to determine the nutricional requirements is 47 days after planting, since the plants are in preflowering, shortly before beginning the linear phase of growth. The nutritionale requirement of tomato is: N, 13 - 20 mM; P, 1 - 1,5 mM; K, 5 - 8 mM; Ca, 4 - 6 mM; and Mg, 2 - 4 mM.En las casas de malla de la Universidad Nacional de Colombia Sede Palmira se realizó un experimento con el objetivo de determinar los requerimientos nutricionales del tomate UNAPAL Maravilla para lo cual se empleó el sistema de hidroponía con sales grado reactivo y agua destilada y se escogió un diseño completamente al azar con 16 tratamientos y cinco repeticiones, se realizaron evaluaciones a los 27, 34, 42, 54 y 92 dds. La etapa de desarrollo adecuada para determinar los requerimientos nutricionales se presentó a los 47 dds en prefloración, poco antes de comenzar la fase lineal de crecimiento. Los requerimientos de N estuvieron entre 13 - 20 mM; los de P, 1 - 1.5 mM; los de K, 5 - 8 mM; los de Ca, 4 - 6 mM; y los de Mg, 2 - 4 mM.

  4. Vehicle lateral dynamics stabilization using active suspension

    Directory of Open Access Journals (Sweden)

    Drobný V.

    2008-12-01

    Full Text Available The paper deals with the investigation of active nonlinear suspension control in order to stabilize the lateral vehicle motion in similar way as systems like ESP do. The lateral stabilization of vehicle based on braking forces can be alternatively provided by the different setting of suspension forces. The basis of this control is the nonlinear property of the tyres. The vehicle has at least four wheels and it gives one or more redundant vertical forces that can be used for the different distribution of vertical suspension forces in such a way that resulting lateral and/or longitudinal forces create the required correction moment for lateral dynamic vehicle stabilization.

  5. Suspension for the low frequency facility

    CERN Document Server

    Cella, G; Di Virgilio, A; Gaddi, A; Viceré, A

    2000-01-01

    We introduce the working principles of the VIRGO Low Frequency Facility (LFF), whose main aim is the measurement of the thermal noise in the VIRGO suspension system. We evaluate the displacement thermal noise of a mirror, which is an intermediate element of a double pendulum suspension system. This double pendulum will be suspended to the last stage of a VIRGO Super-Attenuator (SA), the prototype VIRGO suspension system being tested at the Pisa section of INFN. In the proposed configuration, we evaluate the spectrum of the thermal noise for different choices of the parameters: based on this study, we comment on the future directions to be undertaken in the LFF experiment.

  6. Investigating high-concentration monoclonal antibody powder suspension in nonaqueous suspension vehicles for subcutaneous injection.

    Science.gov (United States)

    Bowen, Mayumi; Armstrong, Nick; Maa, Yuh-Fun

    2012-12-01

    Developing high-concentration monoclonal antibody (mAb) liquid formulations for subcutaneous (s.c.) administration is challenging because increased viscosity makes injection difficult. To overcome this obstacle, we investigated a nonaqueous powder suspension approach. Three IgG1 mAbs were spray dried and suspended at different concentrations in Miglyol® 840, benzyl benzoate, or ethyl lactate. Suspensions were characterized for viscosity, particle size, and syringeability; physical stability was visually inspected. Suspensions generally outperformed liquid solutions for injectability despite higher viscosity at the same mAb concentrations. Powder formulations and properties had little effect on viscosity or injectability. Ethyl lactate suspensions had lowest viscosity (Miglyol® 840 improved overall performance in high mAb concentration suspensions. This study demonstrated the viability of high mAb concentration (>300 mg/mL) in suspension formulations for s.c. administration. Copyright © 2012 Wiley Periodicals, Inc.

  7. Mapas de ruido: mecanismo de control del ruido ambiental

    Directory of Open Access Journals (Sweden)

    Kelvin Chávez García

    2012-12-01

    Full Text Available Los primeros mecanismos de control del ruido ambiental fueron los mapas acústicos. La Directiva Europea 2002149/CE del Parlamento Europeo y del Consejo de Evatuacián y Gestión del Ruido Ambiental, exige, a los estados miembros,  se midan los niveles de ruido, en su entorno local, con  el fin de contar con indicadores de ruido comunes. elaborar mapas de ruido y planes de acción destinados a reducir los efectos nocivos de ruido ambiental.  Las directrices para la elaboración de los  mapas  acústicos son en base a la normativa  Española sobre ruido. Los requerimientos  en base a la normativa, garantizan los resultados, lo cual permitirá elaborar los planes de acción. El estudio busca comunicar la necesidad de utilizar herramientas como  los  mapas  acústicos y ejercer un control de los  impactos por ruido ambiental.

  8. Calidad del servicio de internet en el municipio Maracaibo

    Directory of Open Access Journals (Sweden)

    María Cristina Useche

    2008-09-01

    Full Text Available El objetivo central del trabajo es determinar la calidad de servicio que ofrecen las operadoras habilitadas en el sector de telecomunicaciones en Venezuela para prestar el servicio de Internet en el municipio Maracaibo. El mismo se basó en un tipo de investigación descriptivo- transaccional, abordando el objeto de estudio desde las perspectivas de Zeithaml y Bitner (2002, Pride y Ferrel (1997, Lovelock (1997, Cobra (2000 y Parasuraman, Zeithaml y Berry (2002. Se aplicó el muestreo aleatorio estratificado proporcional conformado por 400 clientes en ese municipio, a la cual se aplicó un cuestionario estructurado para recopilar información necesaria para abordar el objeto de estudio. Los resultados indicaron tendencias favorables a nivel de las percepciones sobre la tangibilidad, confiabilidad, responsabilidad, seguridad y empatía; pero las expectativas encontradas fueron más altas que las percepciones, sin embargo, los rangos no fueron de mayor incidencia, lo cual indica que la calidad del servicio al cliente en las empresas evaluadas se ubica en niveles favorables. A pesar de ello, al no haber cobertura total de las expectativas de los usuarios, la calidad del servicio debe mejorar a fin de garantizar excelencia a los requerimientos, logrando la satisfacción plena de los clientes sobre la prestación del servicio de Internet en Maracaibo.

  9. A Course in Fluid Mechanics of Suspensions.

    Science.gov (United States)

    Davis, Robert H.

    1989-01-01

    Discusses a course focusing on fluid mechanics and physical chemistry of suspensions. Describes the main themes of the lectures and includes a list of course outlines. Possible textbooks and many journal articles are listed. (YP)

  10. Heat and mass transfer in particulate suspensions

    CERN Document Server

    Michaelides, Efstathios E (Stathis)

    2013-01-01

    Heat and Mass Transfer in Particulate Suspensions is a critical review of the subject of heat and mass transfer related to particulate Suspensions, which include both fluid-particles and fluid-droplet Suspensions. Fundamentals, recent advances and industrial applications are examined. The subject of particulate heat and mass transfer is currently driven by two significant applications: energy transformations –primarily combustion – and heat transfer equipment. The first includes particle and droplet combustion processes in engineering Suspensions as diverse as the Fluidized Bed Reactors (FBR’s) and Internal Combustion Engines (ICE’s). On the heat transfer side, cooling with nanofluids, which include nanoparticles, has attracted a great deal of attention in the last decade both from the fundamental and the applied side and has produced several scientific publications. A monograph that combines the fundamentals of heat transfer with particulates as well as the modern applications of the subject would be...

  11. Experimental Evaluation of Mountain Bike Suspension Systems

    Directory of Open Access Journals (Sweden)

    J. Titlestad

    2003-01-01

    Full Text Available A significant distinction between competitive mountain bikes is whether they have a suspension system. Research studies indicate that a suspension system gives advantages, but it is difficult to quantify the benefits because they depend on so many variables, including the physiology and psychology of the cyclist, the roughness of the track and the design of the suspension system. A laboratory based test rig has been built that allows the number of variables in the system to be reduced and test conditions to be controlled. The test rig simulates regular impacts of the rear wheel with bumps in a rolling road. The physiological variables of oxygen consumption and heart rate were measured, together with speeds and forces at various points in the system. Physiological and mechanical test results both confirm a significant benefit in using a suspension system on the simulated rough track, with oxygen consumption reduced by around 30 % and power transmitted through the pedals reduced by 30 % to 60 %.

  12. Crust formation in drying colloidal suspensions

    KAUST Repository

    Style, R. W.; Peppin, S. S. L.

    2010-01-01

    and the equations of poroelasticity, while the equations of colloid physics govern processes in the suspension. We derive new equations describing this process, including unique boundary conditions coupling the two regions, yielding a moving-boundary model

  13. Increasing Possibilities of Nano suspension

    International Nuclear Information System (INIS)

    Sutradhar, K.B.; Khatun, S.; Luna, I.P.

    2013-01-01

    Nowadays, a very large proportion of new drug candidates emerging from drug discovery programmes are water insoluble and thus poorly bioavailable. To avoid this problem, nano technology for drug delivery has gained much interest as a way to improve the solubility problems. Nano refers to particles size range of 1-1000 nm. The reduction of drug particles into the submicron range leads to a significant increase in the dissolution rate and therefore enhances bioavailability. Nanosuspensions are part of nano technology. This interacts with the body at subcellular (i.e., molecular) scales with a high degree of specificity and can be potentially translated into targeted cellular and tissue-specific clinical applications designed to achieve maximal therapeutic efficacy with minimal side effects. Production of drugs as nanosuspensions can be developed for drug delivery systems as an oral formulation and no noral administration. Here, this review describes the methods of pharmaceutical nano suspension production including advantages and disadvantages, potential benefits, characterization tests, and pharmaceutical applications in drug delivery

  14. Suspension scheme for fuel pin

    International Nuclear Information System (INIS)

    Butts, C.E.; Gray, H.C.

    1975-01-01

    A description is presented of a nuclear fuel pin suspension arrangement comprising, in combination, a rod; a first beam member connected to said rod at one end; a plurality of parallel-spaced slidable fuel support plates attached to said first beam member, the longitudinal axis of first beam member being perpendicular to the longitudinal axis of each of said fuel support plates, a first coupling means disposed along the length of the first beam member for permitting slidable fuel support plates parallel movement with respect to the longitudinal axis of said first beam member, a second coupling means located at one end of each of slidable fuel plates for slidably engaging first coupling means of first beam member, a second beam member connected to the other end of each of parallel-spaced slidable fuel support plates and providing an extension, second beam member being provided with a third coupling means disposed along the length of second beam member at one end thereof; and a plurality of fuel pins provided with a fourth coupling means located at one end of each fuel pin for slidably engaging third coupling means of second beam member to permit each fuel pin parallel movement with respect to the longitudinal axis of second beam member. (U.S.)

  15. Characterization of Complex Colloidal Suspensions

    Science.gov (United States)

    Seaman, J. C.; Guerin, M.; Jackson, B. P.; Ranville, J. M.

    2003-04-01

    Surface chemical reactions play a major role in controlling contaminant fate and transport in the subsurface environment. Recent field and laboratory evidence suggests that mobile soil and groundwater colloids may facilitate the migration of sparingly soluble groundwater contaminants. Colloidal suspensions collected in the field or generated in laboratory column experiments tend to be fairly dilute in nature and comprised of relatively small particulates (reserved for studying ideal systems to the characterization of mobile colloids. However, many of these analytical techniques, including total/selective dissolution methods, dynamic light scattering, micro-electrophoresis, streaming potential, and even scanning electron microscopy (SEM), can be biased in of larger size fractions, and therefore, extremely sensitive to sampling, storage, and fractionation artifacts. In addition, surface modifiers such as sorbed oxides or organics can alter particulate appearance, composition, and behavior when compared to synthetic analogues or mineral standards. The current presentation will discuss the limitations and inherent biases associated with a number of analytical characterization techniques that are commonly applied to the study of mobile soil and groundwater colloids, including field flow fractionation (FFF) and acoustic based methods that have only recently become available.

  16. La Cultura del diálogo: actitud de vida del profesional cubano.

    Directory of Open Access Journals (Sweden)

    Mariano Álvarez Farfán

    2009-03-01

    Full Text Available El presente artículo, tiene el propósito de ofrecer algunas consideraciones acerca de la necesidad de la cultura del diálogo y de la comunicación interpersonal óptima, especialmente en las profesiones que se relacionan con la educación y con la formación del ser humano, al considerar la primera como un fundamento esencial para el crecimiento espiritual del hombre y el desarrollo de su personalidad y profesionalidad en aras de un mejor desempeño y mayor influencia en la sociedad. Además, se hace mención a la definición de cultura del diálogo y cultura del error, así como la importancia de ambos en el quehacer cotidiano de toda persona que enseña, educa e instruye. Comúnmente se confunden los términos debate y diálogo, pero, no son sinónimos, ambos permiten el intercambio y la polémica lo que implica interacción, esclarecimiento mutuo y aprendizaje sobre un contenido determinado. Se plantea que, un diálogo mal desarrollado o enfocado puede entorpecer e incluso abortar el debate. Por consiguiente, es necesario dominar los requerimientos o pasos metodológicos para la polémica, o la actividad reflexiva grupal que se desarrolla a partir de la recepción de un mensaje, una experiencia o contenido específico.

  17. Influencia del enfoque teórico en el estilo personal del terapeuta

    Directory of Open Access Journals (Sweden)

    Leandro Martín Casari Cobo

    2013-01-01

    Full Text Available Abstract This research paper aims to study the theoretical and technical influences on therapists backgrounds (PST based on his/her own personal style, and also keeping in mind the common and particular features imposed in their tasks, beyond the scope of their work and the specific requirements they completed for their work. For this research, an PST-Q (Fernandez-Alvarez & Garcia, 1998 questionnaire is applied to a sample of 106 psychotherapists from Argentina. Significant differences in their personal style (PST (between psychoanalytic therapists and psychologists with different theoretical orientation are found. The results are analyzed and future aspects of research are created. Resumen El estilo personal del terapeuta se refiere a características habituales que cada uno impone en su tarea como resultado de su peculiar manera de ser, más allá del enfoque de trabajo que utilice y de los requerimientos específicos que le exija la intervención. El objetivo de este artículo de investigación consistió en estudiar la influencia de la orientación téorico-técnica en el desarrollo del Estilo Personal del Terapeuta (EPT. Para ello, se administró el cuestionario EPT-C (Fernández-Álvarez & García, 1998 a una muestra de 106 psicoterapeutas de Argentina, encontrándose diferencias significativas en las funciones del EPT en los terapeutas psicoanalistas en comparación con los psicólogos de otras orientaciones teóricas. Se analizan los resultados y se plantean futuras líneas de investigación.

  18. Compressed Air Production Using Vehicle Suspension

    OpenAIRE

    Ninad Arun Malpure; Sanket Nandlal Bhansali

    2015-01-01

    Abstract Generally compressed air is produced using different types of air compressors which consumes lot of electric energy and is noisy. In this paper an innovative idea is put forth for production of compressed air using movement of vehicle suspension which normal is wasted. The conversion of the force energy into the compressed air is carried out by the mechanism which consists of the vehicle suspension system hydraulic cylinder Non-return valve air compressor and air receiver. We are co...

  19. Flow-induced structure in colloidal suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Vermant, J [Department of Chemical Engineering, K U Leuven, W de Croylaan 46, B-3001 Leuven (Belgium); Solomon, M J [Department of Chemical Engineering, University of Michigan, Ann Arbor, MI 48109-2136 (United States)

    2005-02-02

    We review the sequences of structural states that can be induced in colloidal suspensions by the application of flow. Structure formation during flow is strongly affected by the delicate balance among interparticle forces, Brownian motion and hydrodynamic interactions. The resulting non-equilibrium microstructure is in turn a principal determinant of the suspension rheology. Colloidal suspensions with near hard-sphere interactions develop an anisotropic, amorphous structure at low dimensionless shear rates. At high rates, clustering due to strong hydrodynamic forces leads to shear thickening rheology. Application of steady-shear flow to suspensions with repulsive interactions induces a rich sequence of transitions to one-, two-and three-dimensional order. Oscillatory-shear flow generates metastable ordering in suspensions with equilibrium liquid structure. On the other hand, short-range attractive interactions can lead to a fluid-to-gel transition under quiescent suspensions. Application of flow leads to orientation, breakup, densification and spatial reorganization of aggregates. Using a non-Newtonian suspending medium leads to additional possibilities for organization. We examine the extent to which theory and simulation have yielded mechanistic understanding of the microstructural transitions that have been observed. (topical review)

  20. Peces del Noroeste del Ecuador

    OpenAIRE

    Barriga, Ramiro

    1994-01-01

    La ictiofauna del occidente del Ecuador es poco conocida. Los peces del noroccidente son diferentes a los del suroccidente del Ecuador. 34 familias y 82 especies fueron colectadas que equivale al 11 % de las especies de peces continentales registradas en el Ecuador. Icteogeográficamente se sabe que la costa ecuatoriana posee dos provincias: la del Pacifico Norte y la del Guayas, se determinó que el límite de las dos provincias es el río Santiago ya que las especies del mencionado río so...

  1. Prevalencia del desorden músculo-esquelético asociado a la actividad docente en instituciones distritales de la localidad de Usme, Bogotá, D.C.

    OpenAIRE

    Fajardo Rodríguez, Albert Nayid

    2016-01-01

    ANTECEDENTES: Los desórdenes musculo esqueléticos DME son una de las alteraciones más frecuentes y una de las principales causas de ausentismo laboral en el continente americano, y Unión Europea, generando graves repercusiones económicas a nivel empresarial, de la salud pública, y del empleado. Esto es debido a una sobrecarga laboral causada por los trabajos repetitivos, posturas mantenidas, y requerimientos de fuerza muscular, por lo que se hace importante identificarlos a través de distinto...

  2. Arquitectura y Pedagogía: la disolución del aula: mapa de espacios arquitectónicos para un territorio pedagógico

    OpenAIRE

    Pozo Bernal, Melina

    2014-01-01

    Ponencia presentada a Session 2: La infancia en el medio ambiente urbano / The urban child La necesidad de repensar el espacio educativo adaptándolo a los requerimientos actuales de la sociedad del conocimiento, sostiene la reflexión sobre el soporte arquitectónico docente desde un punto de vista integrador entre disciplinas: Arquitectura y Pedagogía. Lejos de establecer más especialización y segregación, la transversalidad se hace indispensable. La sociedad evoluciona al mistificar,...

  3. Elaboración del manual de funciones de la Unidad Educativa Técnico Salesiano en la ciudad de Cuenca en el periodo 2014

    OpenAIRE

    León Ortiz, Ximena Magdalena; Vaca Yar, Mishel Dayana

    2014-01-01

    El presente documento detalla las diferentes fases que se deben cursar para la elaboración del manual de funciones de la Unidad Educativa Técnico Salesiano de la Ciudad de Cuenca, el mismo que se convierte en una herramienta de gran importancia y utilidad para el Departamento de Gestión de Talento Humano, aportando la Institución un descriptivo de funciones, responsabilidades y requerimientos que amerita cada uno de los cargos. This document details the different phases that must take for ...

  4. Diseño del proceso para la producción de 60 toneladas de biodiesel a partir de aceite de palma refinado

    OpenAIRE

    Castillo Gonzalez, Aracely Del Carmen; Martinez Lozano, Ernesto Rolando

    2009-01-01

    Este trabajo consiste en el diseño del Proceso para la Producción de Biodiesel a partir de Aceite de Palma Refinado, que tiene como finalidad establecer los requerimientos de máquinas y equipos, y los parámetros de operación para el funcionamiento de una planta piloto para la elaboración industrial de biodiesel aprovechando la producción de aceite de palma refinado como materia prima para el proceso. La metodología empleada en el presente trabajo está sustentada en la investigación científ...

  5. Análisis predictivo : Técnicas y modelos utilizados y aplicaciones del mismo - herramientas Open Source que permiten su uso

    OpenAIRE

    Espino Timón, Carlos

    2017-01-01

    El análisis predictivo es una de las herramientas que forman parte de un conjunto de técnicas más amplio conocido como Business Intelligence. El presente trabajo ha pretendido determinar si existen herramientas open source capaces de cumplir los requerimientos del análisis predictivo. L'anàlisi predictiu és una de les eines que formen part d'un conjunt de tècniques més ampli conegut com a Business Intelligence. El present treball ha pretès determinar si existeixen eines Open Source capaços...

  6. Energy potential of the Sea of Cortes; Potencial energetico del Mar de Cortes

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Gonzalez, Jose [Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

    2006-07-01

    The increasing energy requirements, due to the excessive population growth in the world and its dependency to electronic devises in their daily life, fruit of the technological advances, have forced to different organisms as much public as private from several nations to look for alternating energy sources that are clean (that does not contaminate the environment) and relatively cheap that can face these requirements. One of these sources is, without doubt the ocean, since in it concentrates the transferred energy of the sun and the wind and the forces of attraction of the celestial bodies. In this work a quantification of the energy potential of the tides in the Sea of Cortes is presented in a practical way, taking advantage of the important unevenness of high water and low tide that appears in the North part of it, using the principles which govern the generation of a hydroelectric power station, since the operation and the equipment used are practically the same. [Spanish] Los crecientes requerimientos de energia, debido al crecimiento excesivo de poblacion en el mundo y su dependencia a dispositivos electronicos en su vida cotidiana, fruto del avance tecnologico, han obligado a diferentes organismos tanto publicos como privados de varias naciones a buscar fuentes alternas de energia que sean limpias (que no contaminen el medio ambiente) y relativamente baratas que puedan hacer frente a estos requerimientos. Una de estas fuentes es sin lugar a dudas el oceano ya que en el se concentra la energia transferida del sol y el viento y las fuerzas de atraccion de los cuerpos celestes. En este trabajo se presenta de manera practica una cuantificacion del potencial energetico de las mareas en el mar de Cortes, aprovechando el importante desnivel de pleamar y bajamar que se presenta en la parte norte del mismo, utilizando los principios que rigen la generacion de una central hidroelectrica, ya que, el funcionamiento y el equipo utilizado es practicamente es el mismo.

  7. Sistema interactivo como objeto virtual de aprendizaje aplicado a las técnicas de comunicación en comunidades lejanas de la República Democrática del Congo Interactive system as virtual learning object applied to the skils of communication in distant communities of the Democratic Republic of Congo

    Directory of Open Access Journals (Sweden)

    Gilmar Rolando Anaguano Jiménez

    2008-07-01

    Full Text Available El presente trabajo contiene la descripción del producto final del proyecto 'Sistema interactivo como objeto virtual de aprendizaje aplicado a las técnicas de comunicación en comunidades lejanas de la República Democrática del Congo.', diseñado a la medida y basado en los requerimientos específicos del usuario final (Misioneros de la Consolata radicados en ese país. Este producto consiste en un prototipo de software orientado por los procesos del ciclo de vida del mismo (Planificación, análisis de requerimientos, diseño, desarrollo e implementación, realizado para aplicar las estrategias postuladas por la teoría de aprendizaje mixto (Blended Learning; las cuales se centran en la combinación de sesiones presenciales con actividades virtuales.This article is the result of the research project: 'Interactive System as a Virtual Learning Object Applied Communication Techniques in Distant Communities of the Democratic Republic of the Congo,' customized and based on the final user's specific requirements (Missionaries of the Consolata living in this country. The system is a prototype of software oriented by the processes of the cycle of life (planning, analysis of requirements, design, development and implementation, performed to apply strategies established by the Theory of Blended Learning, which uses face-to-face classrooms, live e-learning, and self-paced learning.

  8. 21 CFR 1301.36 - Suspension or revocation of registration; suspension of registration pending final order...

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Suspension or revocation of registration; suspension of registration pending final order; extension of registration pending final order. 1301.36... registration pending final order; extension of registration pending final order. (a) For any registration...

  9. Suspension, a Wake-Up Call: Rural Educators' Attitudes toward Suspension.

    Science.gov (United States)

    Henderson, Joan; Friedland, Billie

    Data from the West Virginia Department of Education reveals that from September 1991 to January 1992, school districts reported 18,915 out-of-school suspensions involving 12,997 students. In 1995, the West Virginia State Legislature enacted the Safe Schools Act, which specifically mandates suspension for no less than 12 consecutive months for…

  10. Diseño e implementación de una herramienta multiplataforma integral e innovadora para mejorar la eficiencia del análisis de la información y preferencias de los clientes de servicio de desarrollo profesional

    OpenAIRE

    Gaitán Quintanilla, Roberto Carlos

    2017-01-01

    El presente documento contiene el trabajo de investigación ejecutado en la Escuela de Computación del Centro Regional de San Miguel, en el cual participaron de forma activa docentes y estudiantes. El proyecto de investigación consistió en el desarrollo e implementación de un software para el departamento de Servicios de Desarrollo Profesional en este centro regional. Como punto de partida se estudiaron los requerimientos necesarios para la implementación del software de modo que éste fuer...

  11. Numerical study of suspensions of deformable particles.

    Science.gov (United States)

    Brandt, Luca; Rosti, Marco Edoardo

    2017-11-01

    We consider a model non-Newtonian fluid consisting of a suspension of deformable particles in a Newtonian solvent. Einstein showed in his pioneering work that the relative increase in effective viscosity is a linear function of the particle volume fraction for dilute suspensions of rigid particles. Inertia has been shown to introduce deviations from the behaviour predicted by the different empirical fits, an effect that can be related to an increase of the effective volume fraction. We here focus on the effect of elasticity, i.e. visco-elastic deformable particles. To tackle the problem at hand, we perform three-dimensional Direct Numerical Simulation of a plane Couette flow with a suspension of neutrally buoyant deformable viscous hyper-elastic particles. We show that elasticity produces a shear-thinning effect in elastic suspensions (in comparison to rigid ones) and that it can be understood in terms of a reduction of the effective volume fraction of the suspension. The deformation modifies the particle motion reducing the level of mutual interaction. Normal stress differences will also be considered. European Research Council, Grant No. ERC-2013-CoG- 616186, TRITOS; SNIC (the Swedish National Infrastructure for Computing).

  12. Minimally invasive brow suspension for facial paralysis.

    Science.gov (United States)

    Costantino, Peter D; Hiltzik, David H; Moche, Jason; Preminger, Aviva

    2003-01-01

    To report a new technique for unilateral brow suspension for facial paralysis that is minimally invasive, limits supraciliary scar formation, does not require specialized endoscopic equipment or expertise, and has proved to be equal to direct brow suspension in durability and symmetry. Retrospective survey of a case series of 23 patients between January 1997 and December 2000. Metropolitan tertiary care center. Patients with head and neck tumors and brow ptosis caused by facial nerve paralysis. The results of the procedure were determined using the following 3-tier rating system: outstanding (excellent elevation and symmetry); acceptable (good elevation and fair symmetry); and unacceptable (loss of elevation). The results were considered outstanding in 12 patients, acceptable in 9 patients, and unacceptable in only 1 patient. One patient developed a hematoma, and 1 patient required a secondary adjustment. The technique has proved to be superior to standard brow suspension procedures with regard to scar formation and equal with respect to facial symmetry and suspension. These results have caused us to abandon direct brow suspension and to use this minimally invasive method in all cases of brow ptosis due to facial paralysis.

  13. Pitched Blade Turbine Efficiency at Particle Suspension

    Directory of Open Access Journals (Sweden)

    D. Ceres

    2010-01-01

    Full Text Available Mixing suspensions is a very important hydraulic operation. The pitched six-blade turbine is a widely-used axial-flow impeller. This paper deals with effect relative impeller size and particle content on theefficiency of a pitched six-blade turbine at particle suspension. Two pitched six-blade turbines were used in model measurements of just suspension impeller speed. The ratios of the vessel to agitator diameter D/d were 3 and 4.5. The measurements were carried out in a dish-bottomed vessel 300 mm in diameter. The just suspension impeller speeds were measured using an electrochemical method, and were checked visually. A 2.5 % NaCl water solution was used as the liquid phase, and glass particles with four equivalent diameters between 0.18 and 0.89 mmand volumetric concentration from 2.5 % to 40% were usedasthesolid phase. The criterion values πs=Po√Fr'3(d/D7 were calculated from the particle suspension and power consumption measurements. The dependencies of πs on particle content cv show that larger agitators are more efficient for higher particle content.

  14. Competencias docentes para enfrentar la sociedad del conocimiento

    Directory of Open Access Journals (Sweden)

    Yajaira del Carmen Oviedo G.

    2009-10-01

    Full Text Available Los avances científicos y la nueva economía global gestan la necesidad de adquirir nuevas competencias, en particular personales y profesionales, en los futuros ciudadanos y ciudadanas. Ante ello, es urgente la formación de actitudes, conocimientos y habilidades en el docente para afrontar exigencias y requerimientos de una sociedad del conocimiento que otorga un valor distinto a la información más allá de la mera transmisión. Esta reflexión de naturaleza documental hace un aporte a las instituciones formadoras del docente en este siglo XXI, ante el apremio de hacer frente a nuevos retos; asimismo, es viable como una alternativa al requisito de diseñar un perfil complejo que parta de la construcción, manejo y difusión de saberes y haceres vinculados al uso de las TIC. Desde este ámbito, el propósito es generar una visión holística de las perspectivas que constituyen la formación de este profesional (constructiva, reflexiva y humana para dar respuesta a los requerimientos de una sociedad que se transforma en todos los órdenes y, por ende, demanda nuevas formas de pensamiento para manejar el cúmulo de información a la cual está expuesta; implica el manejo y posicionamiento de estrategias y herramientas para mediar entre la tecnología y el estudiante. Estos aportes brindarán espacios para generar aproximaciones a un perfil del docente venezolano desde una dimensión ética, participativa, comprometida y consustanciada con su quehacer pedagógico mediado por las TIC. Se requiere una formación en las dimensiones del ser y el convivir, en las cuales la formación de principios como autonomía, libertad, respeto, responsabilidad, tolerancia, equidad, compromiso y solidaridad con sus pares, sean considerados rasgos fundamentales. Dejar de lado al profesional de la docencia desde concepciones mecanicistas, para entenderlo a partir de una visión integradora.

  15. Aulas de inglés inclusivas: requerimientos, implicaciones y limitaciones: -Un estudio de caso- Inclusive English classrooms: requirements, implications and limitations: -A qualitative case study-

    Directory of Open Access Journals (Sweden)

    Johanna Montaño Moreno

    Full Text Available Resumen Este artículo presenta los resultados de un estudio de caso que buscaba responder a las siguientes preguntas de investigación: ¿Cuáles son las percepciones que tiene la comunidad educativa de un centro educativo distrital acerca de la educación inclusiva en las aulas de inglés?, ¿Cuáles son los parámetros que esta escuela sigue para trabajar con aulas de inglés inclusivas? Y ¿Qué estrategias se utilizan en las aulas de inglés para responder a las necesidades individuales de los estudiantes? El estudio fue realizado durante ocho meses aproximadamente en el centro educativo en mención. Para realizar una descripción completa del proceso de inclusión en la institución se realizaron observaciones de clase, entrevistas a diferentes miembros de la comunidad educativa y se aplicaron cuestionarios a los estudiantes con necesidades educativas especiales y a sus docentes. Los hallazgos revelaron que aunque algunos pocos profesores utilizan estrategias personales para responder a las necesidades individuales de los estudiantes, hay aún muchos obstáculos que se constituyen en una barrera para el desarrollo exitoso de un proceso de inclusión y carencias que se deben atender y suplir.Abstract This article presents the results of a qualitative case study which attempted to answer the following research questions: What are the perceptions that the educational community has of inclusive education in the English language classrooms? What are the parameters that this school follows in order to work with inclusive English classrooms? And what strategies are being used in the classrooms in order to respond to students'individual needs? The study was developed approximately during eight months in a public school in Bogota. Class observations and interviews to different members of the educational community were done and questionnaires to teachers and students with special educational needs were applied in order to provide a thorough

  16. Características del consumo y aporte de energía y nutrientes de una papilla a la dieta de niños de 6 a 36 meses de edad beneficiarios de un programa de complementación alimentaria

    Directory of Open Access Journals (Sweden)

    Carlos Rojas D

    2004-07-01

    Full Text Available Objetivo: Describir las características del consumo y aporte de energía y nutrientes de una papilla en la dieta de niños de 6 a 36 meses de edad beneficiarios de un Programa de Complementación Alimentaria. Materiales y Métodos: El diseño fue descriptivo y transversal. Se aplicó el método retrospectivo de recordatorio del consumo de alimentos de 24 horas. La muestra estuvo conformada por 432 niños beneficiarios del programa. Los requerimientos y recomendaciones de energía y nutrientes fueron determinados a partir de lo establecido por FAO/OMS/ONU para energía y proteínas, y por RDA para hierro y vitamina A. Resultados: El 42,1% de los beneficiarios de 6 a 11 meses cubrieron en promedio menos de 90% de sus requerimientos energéticos, esta proporción fue 47% entre los beneficiarios de 12 a 23 meses y 64,4% entre los beneficiarios de 24 a 36 meses. La brecha calórica fue directamente proporcional a la edad de los beneficiarios. La mediana del consumo de la papilla osciló entre 30 y 90 g en el grupo de 6 a 11 meses, 45 y 69 g en el grupo de 12 a 23 meses y de 34 a 90 g en el grupo de 24 a 36 meses. Conclusiones: Se evidenció que la papilla mejoró el aporte de energía, vitamina A y hierro en la dieta del niño, llegando a cubrir los requerimientos en la mayoría de los grupos etáreos.

  17. Modeling Suspension and Continuation of a Process

    Directory of Open Access Journals (Sweden)

    Oleg Svatos

    2012-04-01

    Full Text Available This work focuses on difficulties an analyst encounters when modeling suspension and continuation of a process in contemporary process modeling languages. As a basis there is introduced general lifecycle of an activity which is then compared to activity lifecycles supported by individual process modeling languages. The comparison shows that the contemporary process modeling languages cover the defined general lifecycle of an activity only partially. There are picked two popular process modeling languages and there is modeled real example, which reviews how the modeling languages can get along with their lack of native support of suspension and continuation of an activity. Upon the unsatisfying results of the contemporary process modeling languages in the modeled example, there is presented a new process modeling language which, as demonstrated, is capable of capturing suspension and continuation of an activity in much simpler and precise way.

  18. Phagocytosis in phosphate chromium (III) suspensions

    International Nuclear Information System (INIS)

    Cruz-Arencibia, Jorge; Fano Machín, Yoiz; Cruz-Morales, Ahmed; Tamayo Fuente, Radamés; Morín-Zorrilla, José

    2015-01-01

    Phagocytosis in vivo and in vitro of a suspension of chromic phosphate (III) labeled with 51 Cr and 32 P is studied. The radioactive particles dispersed in a media of 2 % gelatin in acetate buffer pH 4-4.5 have a predominant size of 0.8 μm and 5 μm. According with biodistribution experiments in rats after 30 minutes near the 80 % of radioactivity is registered in the liver, probably associated with phagocytosis of the particles by liver Kupffer cells. Is also showed that the suspension particles are phagocytized in vitro by mouse peritoneal macrophages. This facts indicate that the studied suspension have appropriate characteristics to be used in radiosynoviorthesis according to the principal action mechanism described for this procedure, particles phagocytosis by cells present in the inflamed synovium. (author)

  19. Crust formation in drying colloidal suspensions

    KAUST Repository

    Style, R. W.

    2010-06-30

    During the drying of colloidal suspensions, the desiccation process causes the suspension near the air interface to consolidate into a connected porous matrix or crust. Fluid transport in the porous medium is governed by Darcy\\'s law and the equations of poroelasticity, while the equations of colloid physics govern processes in the suspension. We derive new equations describing this process, including unique boundary conditions coupling the two regions, yielding a moving-boundary model of the concentration and stress profiles during drying. A solution is found for the steady-state growth of a nedimensional crust during constant evaporation rate from the surface. The solution is used to demonstrate the importance of the system boundary conditions on stress profiles and diffusivity in a drying crust. © 2011 The Royal Society.

  20. Technological requirements for the efficiency and security in the industry of natural gas in Colombia; Requerimientos tecnologicos para la eficiencia y seguridad en la industria del gas natural en Colombia

    Energy Technology Data Exchange (ETDEWEB)

    Arrieta Andres, Amell; Gil B, Edison

    1996-11-01

    In Colombia cities will be gasified to more than 1000 m. of altitude. The theoretical analyses and experimental evidences show that to these conditions the systems work with decrease of power and excessive emissions of carbon Monoxide (CO) The supply of natural gas will come from a diversity of locations with different chemical compositions. The experience points out that teams that use gas of different composition behave in a different way, being able to locate its operation under undesirable conditions when another substitutes a gas. The studies of interchange of gases in an installed park of teams or to install they allow defining the margin of security in the use of gases of different compositions. The purpose of this report is to show the importance that for the efficient and sure use of the natural gas in Colombia have the studies of the incidence of the altitude and the hygrometry in the good operation from the atmospheric systems to gas and the interchange of the Colombian gases.

  1. Performance Testing of Suspension Plasma Sprayed Thermal Barrier Coatings Produced with Varied Suspension Parameters

    Directory of Open Access Journals (Sweden)

    Nicholas Curry

    2015-07-01

    Full Text Available Suspension plasma spraying has become an emerging technology for the production of thermal barrier coatings for the gas turbine industry. Presently, though commercial systems for coating production are available, coatings remain in the development stage. Suitable suspension parameters for coating production remain an outstanding question and the influence of suspension properties on the final coatings is not well known. For this study, a number of suspensions were produced with varied solid loadings, powder size distributions and solvents. Suspensions were sprayed onto superalloy substrates coated with high velocity air fuel (HVAF -sprayed bond coats. Plasma spray parameters were selected to generate columnar structures based on previous experiments and were maintained at constant to discover the influence of the suspension behavior on coating microstructures. Testing of the produced thermal barrier coating (TBC systems has included thermal cyclic fatigue testing and thermal conductivity analysis. Pore size distribution has been characterized by mercury infiltration porosimetry. Results show a strong influence of suspension viscosity and surface tension on the microstructure of the produced coatings.

  2. Suspension Hydrogen Reduction of Iron Oxide Concentrates

    Energy Technology Data Exchange (ETDEWEB)

    H.Y. Sohn

    2008-03-31

    The objective of the project is to develop a new ironmaking technology based on hydrogen and fine iron oxide concentrates in a suspension reduction process. The ultimate objective of the new technology is to replace the blast furnace and to drastically reduce CO2 emissions in the steel industry. The goals of this phase of development are; the performance of detailed material and energy balances, thermochemical and equilibrium calculations for sulfur and phosphorus impurities, the determination of the complete kinetics of hydrogen reduction and bench-scale testing of the suspension reduction process using a large laboratory flash reactor.

  3. Intelligent systems of the vehicles’ suspension

    Science.gov (United States)

    Yurlin, D.

    2018-02-01

    The article is devoted to the current condition of car’s active suspension system. It presents the tendencies in development of the active systems of suspension system, adjustable elements incorporated in them and the companies succeeded in designing such systems. It also mirrors the problem of impact of active systems on car’s safety and their importance for the driver. Advantages and disadvantages of the most common types of active elements are being described, analyzed and compared. The author concludes about the perspectives of these systems’ development.

  4. Unifying Suspension and Granular flows near Jamming

    Directory of Open Access Journals (Sweden)

    DeGiuli Eric

    2017-01-01

    Full Text Available Rheological properties of dense flows of hard particles are singular as one approaches the jamming threshold where flow ceases, both for granular flows dominated by inertia, and for over-damped suspensions. Concomitantly, the lengthscale characterizing velocity correlations appears to diverge at jamming. Here we review a theoretical framework that gives a scaling description of stationary flows of frictionless particles. Our analysis applies both to suspensions and inertial flows of hard particles. We report numerical results in support of the theory, and show the phase diagram that results when friction is added, delineating the regime of validity of the frictionless theory.

  5. Gravity Drainage Kinetics of Papermaking Fibrous Suspensions

    Directory of Open Access Journals (Sweden)

    Przybysz Piotr

    2014-12-01

    Full Text Available The study analyses application possibilities of filtration and thickening models in evaluation of papermaking suspension drainage rate. The authors proposed their own method to estimate the drainage rate on the basis of an existing Ergun capillary model of liquid flow through a granular material. The proposed model was less sensitive to porosity changes than the Ergun model. An empirical verification proved robustness of the proposed approach. Taking into account discrepancies in the published data concerning how the drainage velocity of papermaking suspension is defined, this study examines which of the commonly applied models matches experimental results the best.

  6. Rheological Properties of Aqueous Nanometric Alumina Suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Li, Chuanping [Iowa State Univ., Ames, IA (United States)

    2004-01-01

    Colloidal processing is an effective and reliable approach in the fabrication of the advanced ceramic products. Successful colloidal processing of fine ceramic powders requires accurate control of the rheological properties. The accurate control relies on the understanding the influences of various colloidal parameters on the rheological properties. Almost all research done on the rheology paid less attention to the interactions of particle and solvent. However, the interactions of the particles are usually built up through the media in which the particles are suspended. Therefore, interactions of the particle with the media, the adsorbed layers on the particle surface, and chemical and physical properties of media themselves must influence the rheology of the suspension, especially for the dense suspensions containing nanosized particles. Relatively little research work has been reported in this area. This thesis addresses the rheological properties of nanometric alumina aqueous suspensions, and paying more attention to the interactions between particle and solvent, which in turn influence the particle-particle interactions. Dense nanometric alumina aqueous suspensions with low viscosity were achieved by environmentally-benign fructose additives. The rheology of nanometric alumina aqueous suspensions and its variation with the particle volume fraction and concentration of fructose were explored by rheometry. The adsorptions of solute (fructose) and solvent (water) on the nanometric alumina particle surfaces were measured and analyzed by TG/DSC, TOC, and NMR techniques. The mobility of water molecules in the suspensions and its variation with particle volume fractions and fructose additive were determined by the 17O NMR relaxation method. The interactions between the nanometric alumina particles in water and fructose solutions were investigated by AFM. The results indicated that a large number of water layers were physically bound on the particles

  7. Estimación bayesiana del valor en riesgo: una aplicación para el mercado de valores colombiano

    Directory of Open Access Journals (Sweden)

    Charle Augusto Londoño

    2014-12-01

    Full Text Available Esta investigación tiene como propósito implementar la metodología de regresión cuantil bayesiana en el cálculo del valor en riesgo (VaR, en inglés en el mercado de valores colombiano. Para este objetivo se valoran algunos requerimientos regulatorios sobre riesgo de mercado definidos por la Superintendencia Financiera de Colombia sobre metodologías, medidas de desempeño y factores de riesgo para el cálculo del VaR, y se compara con el modelo APARCH y de regresión cuantil tradicional; se halla que la regresión cuantil tiene una mejor capacidad para adaptarse a los patrones exhibidos por un portafolio de acciones colombianas dadas varias medidas de desempeño.

  8. Simulación del sistema CBTC en la Línea 1 de Metro de Ho Chi Minh

    OpenAIRE

    González Barquilla, Roberto

    2011-01-01

    El objeto del proyecto es simular el tráfico de trenes en una línea de metro bajo el control del sistema CBTC (Control de Trenes Basado en Comunicaciones). El objetivo final es la simulación de una línea de metro, bajo el sistema CBTC, comprobando que cumpla con los requerimientos contractuales de los intervalos de tiempo en la línea y el cumplimiento de la velocidad media en el recorrido de la línea. Para la realización de la simulación se utilizará un programa con el que a partir de los par...

  9. Decoupling Suspension Controller Based on Magnetic Flux Feedback

    Directory of Open Access Journals (Sweden)

    Wenqing Zhang

    2013-01-01

    Full Text Available The suspension module control system model has been established based on MIMO (multiple input and multiple output state feedback linearization. We have completed decoupling between double suspension points, and the new decoupling method has been applied to CMS04 magnetic suspension vehicle in national mid-low-speed maglev experiment field of Tangshan city in China. Double suspension system model is very accurate for investigating stability property of maglev control system. When magnetic flux signal is taken back to the suspension control system, the suspension module’s antijamming capacity for resisting suspension load variety has been proved. Also, the external force interference has been enhanced. As a result, the robustness and stability properties of double-electromagnet suspension control system have been enhanced.

  10. On the Benefits of Semi-Active Suspensions with Inerters

    Directory of Open Access Journals (Sweden)

    Xin-Jie Zhang

    2012-01-01

    Full Text Available Inerters have become a hot topic in recent years especially in vehicle, train, building suspension systems, etc. Eight different layouts of suspensions were analyzed with a quarter-car model in this paper. Dimensionless root mean square (RMS responses of the sprung mass vertical acceleration, the suspension travel, and the tire deflection are derived which were used to evaluate the performance of the quarter-car model. The behaviour of semi-active suspensions with inerters using Groundhook, Skyhook, and Hybrid control has been evaluated and compared to the performance of passive suspensions with inerters. Sensitivity analysis was applied to the development of a high performance semi-active suspension with an inerter. Numerical simulations indicate that a semi-active suspension with an inerter has much better performance than the passive suspension with an inerter, especially with the Hybrid control method, which has the best compromise between comfort and road holding quality.

  11. Decoupling suspension controller based on magnetic flux feedback.

    Science.gov (United States)

    Zhang, Wenqing; Li, Jie; Zhang, Kun; Cui, Peng

    2013-01-01

    The suspension module control system model has been established based on MIMO (multiple input and multiple output) state feedback linearization. We have completed decoupling between double suspension points, and the new decoupling method has been applied to CMS04 magnetic suspension vehicle in national mid-low-speed maglev experiment field of Tangshan city in China. Double suspension system model is very accurate for investigating stability property of maglev control system. When magnetic flux signal is taken back to the suspension control system, the suspension module's antijamming capacity for resisting suspension load variety has been proved. Also, the external force interference has been enhanced. As a result, the robustness and stability properties of double-electromagnet suspension control system have been enhanced.

  12. Measurements on an electromagnetic active suspension system for automotive applications

    NARCIS (Netherlands)

    Gysen, B.L.J.; Paulides, J.J.H.; Lomonova, E.A.; Encica, L.; Gysen, B.L.J.; Jansen, J.W.; Krop, D.C.J.

    2008-01-01

    Abstract—This paper describes the specifications for active suspension systems and provides an electromagnetic solution. Electromagnetic actuation and preliminary control strategies are investigated in order to achieve a suspension system with the ability to absorb road irregularities and perform

  13. Fuzzy logic control of vehicle suspensions with dry friction nonlinearity

    Indian Academy of Sciences (India)

    Fuzzy logic control; active vehicle suspension; suspension space. 1. ... surface unevenness, stability and directional control during handling ..... Burton A W, Truscott A J, Wellstead P E 1995 Analysis, modeling and control of an advanced.

  14. Resultados Preliminares sobre Estudios de Evapotranspiración del Cacao.

    Directory of Open Access Journals (Sweden)

    Navarrete S. Cristóbal

    1960-06-01

    Full Text Available El objeto de este trabajo fue determinar los requerimientos de agua por el cacaotero. De los múltiples métodos que existen para este fin, solo el que hace uso de la evapotranspirometría da la solución deseada. El método se basa en que el agua del suelo establece un equilibrio entre el agua que entra, como resultado de la precipitación y el agua que sale a través de la evaporación y transpiración. Para este estudio se están usando cuatro evapotranspirómetros de 2 x 2 metros en la parte superior y 1.20 metros de profundidad: un quinto tanque sirve de fosa colectora, donde se tienen las canecas que recogen las aguas de drenajes. A los evapotranspirómetros se trasplantaron cacaoteros de tres y medio años de edad del Clon 6. Posteriormente fueron rellenados consuelo del mismo lugar y procedente de la excavación. La estación de evapotranspirometría se localizó en medio de una plantación comerciaal de cacao del clon 6 de la misma edad, en la que se ha demarcado una zona buffer de 50 x 50 mts., ésta se riega en la misma forma que los tanques evapotranspirómetros. A éstos se les aplica una cantidad medida de agua cuando no llueve en las 24 horas anteriores. La evapotranspiración potencial se mide restando del agua aplicarla la la cantidad recogida en las canecas, esto se hace para cada tanque todos los días a las 8 a.m. Además de la evapotranspiración potencial, diariamente se toman datos metereológicos en aparatos localizados junto a los tanques experimentales. La información para tres meses; indica que el agua de lluvia sólo suministró el 42.19% y el 63.33% de los requerimientos de agua para el cacaotero en los meses de febrero y marzo respectivamente. En el mes de abril la precipitación fue superior a los requerimientos de agua, va que el consumo fue de 58.46 mm. Y la precipitación de 129.5 mm. Debido a la información tan escasa (tres meses solamente aquí presentada, es imposible, por el momento

  15. Reformas institucionales e integración global la intervención del Banco Mundial en Argentina durante los '90

    Directory of Open Access Journals (Sweden)

    Ruth Felder

    2009-06-01

    Full Text Available El proceso de reformas económicas e institucionales llevado a cabo en Argentina durante la década de los '90 transformó profundamente la estructura económica del país, las formas de acción del estado y la configuración de su aparato institucional. En este trabajo revisaré la intervención del Banco Mundial en las distintas etapas de este proceso. Prestaré atención al rol que éste tuvo en la primera etapa de reducción del tamaño del aparato del Estado y de apertura al mercado. Luego analizaré los argumentos y proyectos referidos al fortalecimiento de las capacidades institucionales del Estado y a la creación de redes de contención social desarrollados en el marco de la denominada 'Segunda Reforma del Estado' de mediados de los '90. Finalmente, me centraré en el abandono de estas prioridades relacionadas con fortalecimiento del Estado y en la creciente importancia que adquirieron los proyectos relacionados con el ajuste fiscal y el manejo de la deuda pública en el contexto de los desequilibrios macroeconómicos y de la recesión de fines de los '90. A partir del análisis de la dinámica histórica de la intervención del Banco Mundial en el proceso de reformas, voy a plantear que, más allá de los objetivos formales de los numerosos proyectos del Banco Mundial, la institución ha jugado un rol mediador entre los requerimientos de integración en la economía global y el Estado argentino tanto en la etapa de 'reducción' como en la de 'mejoramiento' de la intervención del Estado. Sus proyectos se han orientado a transformar estos requerimientos en esquemas institucionales y en políticas estatales concretos que profundizaron la integración del país en la economía global. Estas prioridades se han puesto de manifiesto en la crisis de fines de los '90 y principios de la presente década.

  16. "Restorative Practices" Offer Alternatives to Suspension

    Science.gov (United States)

    Shah, Nirvi

    2012-01-01

    At City Springs and many other schools across the country, restorative practices are about holding students accountable and getting them to right a wrong. The approach is getting more notice than ever as criticism grows of zero-tolerance disciplinary policies that often require out-of-school suspension and expulsion. Educators are turning to…

  17. Mesoscopic electrohydrodynamic simulations of binary colloidal suspensions

    NARCIS (Netherlands)

    Rivas, Nicolas; Frijters, Stefan; Pagonabarraga, Ignacio; Harting, Jens

    2018-01-01

    A model is presented for the solution of electrokinetic phenomena of colloidal suspensions in fluid mixtures. We solve the discrete Boltzmann equation with a Bhatnagar-Gross-Krook collision operator using the lattice Boltzmann method to simulate binary fluid flows. Solvent-solvent and solvent-solute

  18. 75 FR 68704 - Suspension of Community Eligibility

    Science.gov (United States)

    2010-11-09

    ... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency 44 CFR Part 64 [Docket ID FEMA-2010-0003; Internal Agency Docket No. FEMA-8155] Suspension of Community Eligibility AGENCY: Federal.... Acadia Parish. Emerg; February 4, 1981, Reg; November 26, 2010, Susp. Iota, Town of, Acadia 220005...

  19. Suspension of Water Droplets on Individual Pillars

    DEFF Research Database (Denmark)

    Tóth, T.; Ferraro, D.; Chiarello, E.

    2011-01-01

    We report results of extensive experimental and numerical studies on the suspension of water drops deposited on cylindrical pillars having circular and square cross sections and different wettabilities. In the case of circular pillars, the drop contact line is pinned to the whole edge contour unt...

  20. ENHANCEMENT OF DURABILITY OF TRACTOR SUSPENSION AXLES

    Directory of Open Access Journals (Sweden)

    I. Doshchechkina

    2017-12-01

    Full Text Available The ‘soft’ nitriding of the suspension axle surface of the T150K tractor at the depth of 0.08 mm enables us to enhance its constructive strength, to increase its service life by 25 % and have a considerable economic effect.

  1. Pair-correlations in swimmer suspensions

    Science.gov (United States)

    Nambiar, Sankalp; Subramanian, Ganesh

    2017-11-01

    Suspensions of rear-actuated swimming microorganisms, such as E.coli, exhibit several interesting phenomena including spontaneous pattern formation above a critical concentration, novel rheological properties, shear-induced concentration banding etc. Explanations based on mean-field theory are only qualitative, since interactions between swimmers are important for typical experimental concentrations. We analytically characterize the hydrodynamic pair-interactions in a quiescent suspension of slender straight swimmers. The pair-correlation, calculated at leading order by integrating the swimmer velocity disturbances along straight trajectories, decays as 1/r2 for r >> L (L being the swimmer size). This allows us to characterize both polar and nematic correlations in an interacting swimmer suspension. In the absence of correlations, the velocity covariance asymptotes from a constant for r > L, the latter being characteristic of a suspension of non-interacting point force-dipoles. On including correlations, the slow decay of the pair-orientation correlation leads to an additional contribution to the velocity covariance that diverges logarithmically with system size.

  2. Baltimore District Tackles High Suspension Rates

    Science.gov (United States)

    Maxwell, Lesli A.

    2007-01-01

    This article reports on how the Baltimore District tackles its high suspension rates. Driven by an increasing belief that zero-tolerance disciplinary policies are ineffective, more educators are embracing strategies that do not exclude misbehaving students from school for offenses such as insubordination, disrespect, cutting class, tardiness, and…

  3. Absorption Spectra of Gold Nanoparticle Suspensions

    Science.gov (United States)

    Anan'eva, M. V.; Nurmukhametov, D. R.; Zverev, A. S.; Nelyubina, N. V.; Zvekov, A. A.; Russakov, D. M.; Kalenskii, A. V.; Eremenko, A. N.

    2018-02-01

    Three gold nanoparticle suspensions are obtained, and mean radii in distributions - (6.1 ± 0.2), (11.9 ± 0.3), and (17.3 ± 0.7) nm - are determined by the transmission electron microscopy method. The optical absorption spectra of suspensions are obtained and studied. Calculation of spectral dependences of the absorption index of suspensions at values of the gold complex refractive index taken from the literature showed a significant deviation of experimental and calculated data in the region of 450-800 nm. Spectral dependences of the absorption of suspensions are simulated within the framework of the Mie-Drude theory taking into account the interband absorption in the form of an additional term in the imaginary part of the dielectric permittivity of the Gaussian type. It is shown that to quantify the spectral dependences in the region of the plasmon absorption band of nanoparticles, correction of the parameters of the interband absorption is necessary in addition to the increase of the relaxation parameter of the Drude theory. Spectral dependences of the dielectric permittivity of gold in nanodimensional state are refined from the solution of the inverse problem. The results of the present work are important for predicting the special features of operation of photonic devices and optical detonators based on gold nanoparticles.

  4. Yield stress of alumina-zirconia suspensions

    International Nuclear Information System (INIS)

    Ramakrishnan, V.; Pradip; Malghan, S.G.

    1996-01-01

    The yield stress of concentrated suspensions of alumina, zirconia, and mixed alumina-zirconia powders was measured by the vane technique as a function of solids loading, relative amounts of alumina and zirconia, and pH. At the isoelectric point (IEP), the yield stress varied as the fourth power of the solids loading. The relative ratio of alumina and zirconia particles was important in determining the yield stress of the suspension at the IEP. The yield stress of single and mixed suspensions showed a marked variation with pH. The maximum value occurred at or near the IEP of the suspension. The effect of electrical double-layer forces on the yield stress can be described on the basis of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. A normalized yield stress--that is, the ratio of the yield stress at a given pH to the yield stress at the IEP predicted by this model--showed good correlation with experimental data

  5. Alternatives to School Disciplinary and Suspension Problems.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Div. of Instruction.

    Policies and procedures for disciplining students should be designed to teach them responsibility, rather than simply punish them. Providing educational opportunities to behavioral deviants is a problem that does not have a simple solution. However, alternatives to suspension or expulsion must be attempted before these disciplinary actions are…

  6. Evaluación de los recursos hídricos en las cuencas de los ríos Casma, Culebras y Huarmey: estudio hidrológico en la cuenca del río Casma (Informe final)

    OpenAIRE

    Instituto Nacional de Recursos Naturales. Intendencia de Recursos Hídricos; Administración Técnica del Distrito de Riego Casma - Huarmey

    2007-01-01

    Desarrolla el estudio hidrológico en la cuenca del río Casma, con la finalidad de describir, evaluar, cuantificar y simular el funcionamiento de la cuenca como un sistema hidrológico integral, para ser empleada en la gestión de los recursos hídricos y en el diseño de las obras hidráulicas proyectadas (captación, conducción, obras de arte, regulación, excedencia, etc.). El contenido de este estudio precisa: la disponibilidad de agua, el requerimiento de agua, balance hídrico, características d...

  7. Evaluación agronómica del uso de compost de residuos de la industria azucarera (biofertilizante) en el cultivo de maíz (Zea mays L.)

    OpenAIRE

    Matheus, Jesús

    2004-01-01

    Se evaluó agronómicamente un compost elaborado con desechos sólidos de la industria azucarera (biofertilizante La Pastora) como alternativa para restaurar la fertilidad de un suelo degradado y suplir los requerimientos nutricionales del cultivo de maíz (híbrido Himeca 2000). La experiencia se realizó en el Núcleo Universitario Rafael Rangel en el estado Trujillo, Venezuela, mediante un diseño de bloques al azar con cuatro repeticiones se evaluaron los siguientes tratamientos: biofertilizante ...

  8. Estudio del impacto del cambio climático en los caudales de entrada al embalse del Río Frío

    Directory of Open Access Journals (Sweden)

    Mónica Tatiana Gómez Vargas

    2016-01-01

    Full Text Available Se evaluó cual podría ser la tendencia y la afectación en los caudales de entrada hasta el año 2100 del embalse que se tiene proyectado sobre el Río Frío para el abastecimiento de los municipios de Chía, Tenjo, Tabio, Cota y Cajicá considerando el RCP 4.5 y 8.5, los cuales describen dos caminos del forzamiento radiativo hasta el año 2100. Estos tuvieron en cuenta las series asociadas a las simulaciones realizadas en los modelos climáticos globales CCSM4, IPSL CM5A –LR y MIROC ESM y los RCP. Se realizaron análisis comparativos para saber si las demandas proyectadas hasta el año 2070 podrán cumplirse al considerar el cambio climático. Se puso en evidencia que las demandas estimadas son elevadas y tienen un crecimiento exponencial, mientras que la oferta que se estimó tiene valores pequeños que no son suficientes para satisfacer los requerimientos de abastecimiento. Los caudales de entrada se esperan que tengan disminuciones de aproximadamente un 20%.

  9. Electrostratic stabilization of suspensions in non-aqueous media

    NARCIS (Netherlands)

    Hoeven, van der P.C.

    1991-01-01

    Concentrated suspensions of detergent powder solids in a liquid nonionic surfactant are considered for practical application as liquid detergent products. If no precautions are taken, upon storage the viscosity of such suspensions increases and the pourability drops because the suspensions are

  10. Preview based control of suspension systems for commercial vehicles

    NARCIS (Netherlands)

    Muijderman, J.H.E.A.; Kok, J.J.; Huisman, R.G.M.; Veldpaus, F.E.; van Heck, J.G.A.M.

    1999-01-01

    An active suspension with preview is developed for the rear axle of a commercial vehicle. The obtained improvements are promising and justify further investigation of the more feasible semi-active suspensions with preview. The inherent non-linearity of semi-active suspensions with switching shock

  11. Professor Jesse W. Beams and the first practical magnetic suspension

    Science.gov (United States)

    Allaire, P. E.; Humphris, R. R.; Lewis, D. W.

    1992-01-01

    Dr. Jesse W. Beams developed the first practical magnetic suspension for high speed rotating devices. The devices included high speed rotating mirrors, ultracentrifuges, and high speed centrifugal field rotors. A brief biography of Dr. Beams is presented, and the following topics are discussed: (1) early axial magnetic suspension for ultracentrifuges; and (2) magnetic suspension for high centrifugal fields.

  12. Fuzzy logic control of vehicle suspensions with dry friction nonlinearity

    Indian Academy of Sciences (India)

    We design and investigate the performance of fuzzy logic-controlled (FLC) active suspensions on a nonlinear vehicle model with four degrees of freedom, without causing any degeneration in suspension working limits. Force actuators were mounted parallel to the suspensions. In this new approach, linear combinations of ...

  13. Behaviour of humic-bentonite aggregates in diluted suspensions ...

    African Journals Online (AJOL)

    Formation and disaggregation of micron-size aggregates in a diluted suspension made up of HSs and bentonite (B) were studied by tracing distribution of aggregate sizes and their counts in freshly prepared and aged suspensions, and at high (10 000) and low (1.0) [HS]/[B] ratios. Diluted HSB suspensions are unstable ...

  14. 15 CFR 2011.207 - Suspension of the certificate system.

    Science.gov (United States)

    2010-01-01

    ..., SYRUPS AND MOLASSES Specialty Sugar § 2011.207 Suspension of the certificate system. (a) Suspension. The.... Notice of such suspension and the effective date thereof shall be published in the Federal Register. (b... such reinstatement and the effective date thereof shall be published in the Federal Register. (c...

  15. 13 CFR 120.660 - Suspension or revocation.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Suspension or revocation. 120.660 Section 120.660 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Secondary Market Suspension Or Revocation of Participant in Secondary Market § 120.660 Suspension or revocation. (a...

  16. 39 CFR 3001.114 - Suspension pending review.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Suspension pending review. 3001.114 Section 3001... Suspension pending review. (a) Application. Application for suspension of a determination of the Postal Service to close or consolidate any post office pending the outcome of an appeal to the Postal Regulatory...

  17. 21 CFR 520.905a - Fenbendazole suspension.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Fenbendazole suspension. 520.905a Section 520.905a... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.905a Fenbendazole suspension. (a) Specifications. Each milliliter of suspension contains 100 milligrams (mg) fenbendazole. (b...

  18. LA PRODUCCIÓN DE TEXTOS ESCOLARES EN CHILE Y EN BRASIL: relaciones entre currículum, contenidos geográficos y requerimientos técnicos

    Directory of Open Access Journals (Sweden)

    Nataly Pérez Cisternas

    2013-06-01

    Full Text Available Este artículo desea responder a la inquietud sobre cómo es el proceso de construcción de los textos escolares en Chile y en Brasil, considerando específicamente los contenidos geográficos para el último año de enseñanza media en ambos contextos. De esta forma, se establecen los aspectos generales sobre la producción de textos escolares y políticas educativas y, se señalan las relaciones entre lo que indica el currículum y lo que solicitan los criterios/requerimientos para la elaboración de los textos escolares. Además, de considerar el desarrollo de estos procesos, sus semejanzas y diferencias. RESUMO: Este artigo deseja responder à inquietude sobre como é o processo de construção dos livros didáticos no Chile e no Brasil, considerando especificamente os conteúdos geográficos para o último ano do ensino médio em ambos os contextos. Desta forma, estabelecem-se os aspectos gerais sobre a produção dos livros didáticos e políticas educativas e assinalam-se as relações entre o que indica o currículo e o que é solicitado nos critérios/requerimentos para a elaboração desse material. Além de considerar o desenvolvimento desses processos, suas semelhanças e diferenças.

  19. Microstructural Dynamics and Rheology of Suspensions of Rigid Fibers

    Science.gov (United States)

    Butler, Jason E.; Snook, Braden

    2018-01-01

    The dynamics and rheology of suspensions of rigid, non-Brownian fibers in Newtonian fluids are reviewed. Experiments, theories, and computer simulations are considered, with an emphasis on suspensions at semidilute and concentrated conditions. In these suspensions, interactions between the particles strongly influence the microstructure and rheological properties of the suspension. The interactions can arise from hydrodynamic disturbances, giving multibody interactions at long ranges and pairwise lubrication forces over short distances. For concentrated suspensions, additional interactions due to excluded volume (contacts) and adhesive forces are addressed. The relative importance of the various interactions as a function of fiber concentration is assessed.

  20. Calificación del sistema de HVAC en una planta de producción de IFA

    Directory of Open Access Journals (Sweden)

    Otto Reyes

    2006-12-01

    Full Text Available La calificación de áreas asépticas constituye uno de los requerimientos esenciales en el cumplimiento de regulaciones nacionales para la fabricación de productos estériles. Se realizó la calificación inicial (as built de una Planta de Ingrediente Farmacéutico Activo (IFA para la fabricación de vacunas contra tétanos, fiebre tifoidea y tos ferina. Las comprobaciones estuvieron basadas en normas internacionales y para ello se empleó un equipamiento que cumple con los requerimientos para la industria farmacéutica. Pudo comprobarse que el sistema de clima es capaz de garantizar los parámetros críticos de operación de las áreas limpias, aunque algunos criterios de pruebas opcionales no fueron cumplidos.Los resultados obtenidos sirven como referencia para el control de los parámetros del sistema de HVAC y para la toma de acciones correctivas.

  1. Study on kinematic and compliance test of suspension

    Science.gov (United States)

    Jing, Lixin; Wu, Liguang; Li, Xuepeng; Zhang, Yu

    2017-09-01

    Chassis performance development is a major difficulty in vehicle research and development, which is the main factor restricting the independent development of vehicles in China. These years, through a large number of studies, chassis engineers have found that the suspension K&C characteristics as a quasi-static characteristic of the suspension provides a technical route for the suspension performance R&D, and the suspension K&C test has become an important means of vehicle benchmarking, optimization and verification. However, the research on suspension K&C test is less in china, and the test conditions and setting requirements vary greatly from OEM to OEM. In this paper, the influence of different settings on the characteristics of the suspension is obtained through experiments, and the causes of the differences are analyzed; in order to fully reflect the suspension characteristics, the author recommends the appropriate test case and settings.

  2. System and technique for ultrasonic characterization of settling suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Greenwood, Margaret S [Richland, WA; Panetta, Paul D [Richland, WA; Bamberger, Judith A [Richland, WA; Pappas, Richard A [Richland, WA

    2006-11-28

    A system for determining properties of settling suspensions includes a settling container, a mixer, and devices for ultrasonic interrogation transverse to the settling direction. A computer system controls operation of the mixer and the interrogation devices and records the response to the interrogating as a function of settling time, which is then used to determine suspension properties. Attenuation versus settling time for dilute suspensions, such as dilute wood pulp suspension, exhibits a peak at different settling times for suspensions having different properties, and the location of this peak is used as one mechanism for characterizing suspensions. Alternatively or in addition, a plurality of ultrasound receivers are arranged at different angles to a common transmitter to receive scattering responses at a variety of angles during particle settling. Angular differences in scattering as a function of settling time are also used to characterize the suspension.

  3. Nonlinear Predictive Sliding Mode Control for Active Suspension System

    Directory of Open Access Journals (Sweden)

    Dazhuang Wang

    2018-01-01

    Full Text Available An active suspension system is important in meeting the requirements of the ride comfort and handling stability for vehicles. In this work, a nonlinear model of active suspension system and a corresponding nonlinear robust predictive sliding mode control are established for the control problem of active suspension. Firstly, a seven-degree-of-freedom active suspension model is established considering the nonlinear effects of springs and dampers; and secondly, the dynamic model is expanded in the time domain, and the corresponding predictive sliding mode control is established. The uncertainties in the controller are approximated by the fuzzy logic system, and the adaptive controller reduces the approximation error to increase the robustness of the control system. Finally, the simulation results show that the ride comfort and handling stability performance of the active suspension system is better than that of the passive suspension system and the Skyhook active suspension. Thus, the system can obviously improve the shock absorption performance of vehicles.

  4. Time varying behaviour of the loudspeaker suspension

    DEFF Research Database (Denmark)

    Agerkvist, Finn; Pedersen, Bo Rohde

    2009-01-01

    The compliance of the loudspeaker suspension is known to depend on the recent excitation level history. Previous investigations have shown that the electrical power as well as displacement and velocity plays a role. In this paper the hypothesis that the changes in compliance are caused mainly...... by how much the suspension has been stretched, i.e., the maximum displacement, is investigated. For this purpose the changes in compliance are measured when exposing the loudspeaker to different levels and types of electrical excitation signals, as well as mechanical excitation only. For sinusoidal...... excitation the change in compliance is shown to depend primarily on maximum displacement. But for square pulse excitation the duration of the excitation also plays an important role....

  5. Constraint Embedding for Vehicle Suspension Dynamics

    Directory of Open Access Journals (Sweden)

    Jain Abhinandan

    2016-06-01

    Full Text Available The goal of this research is to achieve close to real-time dynamics performance for allowing auto-pilot in-the-loop testing of unmanned ground vehicles (UGV for urban as well as off-road scenarios. The overall vehicle dynamics performance is governed by the multibody dynamics model for the vehicle, the wheel/terrain interaction dynamics and the onboard control system. The topic of this paper is the development of computationally efficient and accurate dynamics model for ground vehicles with complex suspension dynamics. A challenge is that typical vehicle suspensions involve closed-chain loops which require expensive DAE integration techniques. In this paper, we illustrate the use the alternative constraint embedding technique to reduce the cost and improve the accuracy of the dynamics model for the vehicle.

  6. Mesoscopic electrohydrodynamic simulations of binary colloidal suspensions

    Science.gov (United States)

    Rivas, Nicolas; Frijters, Stefan; Pagonabarraga, Ignacio; Harting, Jens

    2018-04-01

    A model is presented for the solution of electrokinetic phenomena of colloidal suspensions in fluid mixtures. We solve the discrete Boltzmann equation with a Bhatnagar-Gross-Krook collision operator using the lattice Boltzmann method to simulate binary fluid flows. Solvent-solvent and solvent-solute interactions are implemented using a pseudopotential model. The Nernst-Planck equation, describing the kinetics of dissolved ion species, is solved using a finite difference discretization based on the link-flux method. The colloids are resolved on the lattice and coupled to the hydrodynamics and electrokinetics through appropriate boundary conditions. We present the first full integration of these three elements. The model is validated by comparing with known analytic solutions of ionic distributions at fluid interfaces, dielectric droplet deformations, and the electrophoretic mobility of colloidal suspensions. Its possibilities are explored by considering various physical systems, such as breakup of charged and neutral droplets and colloidal dynamics at either planar or spherical fluid interfaces.

  7. Submerged cutting characteristics of abrasive suspension jet

    International Nuclear Information System (INIS)

    Shimizu, Seiji; Peng, Guoyi; Oguma, Yasuyuki; Nishikata, Hiroyuki

    2015-01-01

    An abrasive suspension jet (ASJ) formed by propelling abrasive suspension through a nozzle has a greater cutting capability than the conventional abrasive water jet. However the cutting capability of submerged ASJs decreases drastically with increasing the standoff distance and the pressure around the jet. A sheathed nozzle with ventilation for ASJs has been developed as a mean of extending the effective stand-off distance and improving the cutting capabilities under submerged condition. In the present investigation, cutting tests by ASJs in air and under submerged condition are conducted with specimens of aluminum alloy. Air coated ASJs are formed by using a sheathed nozzle with ventilation. The relative cutting depth is defined as the cutting depth under submerged condition divided by the cutting depth in air at the same standoff distance. The relative cutting depth is arranged effectually by the cavitation number based on the cavity pressure measured at the sheath. (author)

  8. Submerged cutting characteristics of abrasive suspension jet

    International Nuclear Information System (INIS)

    Shimizu, Seiji; Peng, Guoyi; Oguma, Yasuyuki; Nishikata, Hiroki

    2015-01-01

    An abrasive suspension jet (ASJ) formed by propelling abrasive suspension through a nozzle has a greater cutting capability than the conventional abrasive water jet. However the cutting capability of submerged ASJs decreases drastically with increasing the standoff distance and the pressure around the jet. A sheathed nozzle nozzle with ventilation for ASJs has been developed as a mean of extending the effective stand-off distance and improving the cutting capabilities under submerged condition. In the present investigation, cutting tests by ASJs in air and under submerged condition are conducted with specimens of aluminum alloy. Air coated ASJs are formed by using a sheathed nozzle with ventilation. The relative cutting depth is defined as the cutting depth is arranged effectually by the cavitation number based on the cavity pressure measured at the sheath. (author)

  9. Suspensions of colloidal particles and aggregates

    CERN Document Server

    Babick, Frank

    2016-01-01

    This book addresses the properties of particles in colloidal suspensions. It has a focus on particle aggregates and the dependency of their physical behaviour on morphological parameters. For this purpose, relevant theories and methodological tools are reviewed and applied to selected examples. The book is divided into four main chapters. The first of them introduces important measurement techniques for the determination of particle size and interfacial properties in colloidal suspensions. A further chapter is devoted to the physico-chemical properties of colloidal particles—highlighting the interfacial phenomena and the corresponding interactions between particles. The book’s central chapter examines the structure-property relations of colloidal aggregates. This comprises concepts to quantify size and structure of aggregates, models and numerical tools for calculating the (light) scattering and hydrodynamic properties of aggregates, and a discussion on van-der-Waals and double layer interactions between ...

  10. Compressed Air Production Using Vehicle Suspension

    Directory of Open Access Journals (Sweden)

    Ninad Arun Malpure

    2015-08-01

    Full Text Available Abstract Generally compressed air is produced using different types of air compressors which consumes lot of electric energy and is noisy. In this paper an innovative idea is put forth for production of compressed air using movement of vehicle suspension which normal is wasted. The conversion of the force energy into the compressed air is carried out by the mechanism which consists of the vehicle suspension system hydraulic cylinder Non-return valve air compressor and air receiver. We are collecting air in the cylinder and store this energy into the tank by simply driving the vehicle. This method is non-conventional as no fuel input is required and is least polluting.

  11. Characterization of alumina suspensions by electroacoustics

    Energy Technology Data Exchange (ETDEWEB)

    Galassi, C.; Roncari, E.; Greenwood, R.; Piancastelli, A. [CNR, Faenza (Italy). Research Inst. for Ceramics Technology

    1997-12-31

    Using the acoustophoresis technique three different dispersants were selected to investigate the effect of the volume fraction of the suspension on the minimum amount of dispersant required to give the maximum zeta potential. No effect was detected over a volume fraction range 0.11 to 0.35. The acoustosizer was used to screen many dispersants for alumina in a relatively short time. From the viewpoint that the most stable suspensions are those with the greatest zeta potentials, then the following dispersants can be recommended: Reotan LA (0.25 mg/m{sup 2}) Dolapix CA (0.20 mg/m{sup 2}) and Dolapix PC33 (0.30 mg/m{sup 2}). Vanisperse and Borresperse are poor. Polyacrylic acid and polymethacrylic acid were better than some commercially available products. (orig.) 2 refs.

  12. Vibration Reduction System Using Magnetic Suspension Technology

    Directory of Open Access Journals (Sweden)

    Spychała Jarosław

    2015-01-01

    Full Text Available The article presents considerations concerning the construction of vibration reduction system using magnetic suspension technology. Presents the results of simulation, numerical and experimental the bearingless electric motor, for which successfully used this type of solution. Positive results of research and testing have become the basis for the development of the concept of building this type of active vibration reduction system , at the same time acting as a support for a technical object, which is a jet engine. Bearing failures are manifested by loss or distortion of their mass, which leads to a total destruction of the roller bearing, and thus reflected in the security. The article presents the concept of building active magnetic suspension to eliminate the bearing system of classical rolling bearing and replace it with magnetic bearing.

  13. Low Reynolds number suspension gravity currents.

    Science.gov (United States)

    Saha, Sandeep; Salin, Dominique; Talon, Laurent

    2013-08-01

    The extension of a gravity current in a lock-exchange problem, proceeds as square root of time in the viscous-buoyancy phase, where there is a balance between gravitational and viscous forces. In the presence of particles however, this scenario is drastically altered, because sedimentation reduces the motive gravitational force and introduces a finite distance and time at which the gravity current halts. We investigate the spreading of low Reynolds number suspension gravity currents using a novel approach based on the Lattice-Boltzmann (LB) method. The suspension is modeled as a continuous medium with a concentration-dependent viscosity. The settling of particles is simulated using a drift flux function approach that enables us to capture sudden discontinuities in particle concentration that travel as kinematic shock waves. Thereafter a numerical investigation of lock-exchange flows between pure fluids of unequal viscosity, reveals the existence of wall layers which reduce the spreading rate substantially compared to the lubrication theory prediction. In suspension gravity currents, we observe that the settling of particles leads to the formation of two additional fronts: a horizontal front near the top that descends vertically and a sediment layer at the bottom which aggrandises due to deposition of particles. Three phases are identified in the spreading process: the final corresponding to the mutual approach of the two horizontal fronts while the laterally advancing front halts indicating that the suspension current stops even before all the particles have settled. The first two regimes represent a constant and a decreasing spreading rate respectively. Finally we conduct experiments to substantiate the conclusions of our numerical and theoretical investigation.

  14. The aqueous homogeneous suspension reactor project

    International Nuclear Information System (INIS)

    1975-01-01

    The power of the KSTR reactor has been increased up to 200 kW in the fourth quarter of 1974. A description is given of the behaviour of the reactor at increased power level, safety aspects concerned with this new level, the operation of the reactor, instrumental behavior and mechanical behavior. Irradiation investigation of two types of fuels are reported and results are presented. Progress made on the conceptual design of a 250 MWe suspension reactor is described

  15. A Model of Active Roll Vehicle Suspension

    Directory of Open Access Journals (Sweden)

    I. Čech

    2010-01-01

    Full Text Available This paper describes active suspension with active roll for four-wheel vehicle (bus by means of an in-series pump actuator with doubled hydropneumatic springs. It also gives full control law with no sky-craping. Lateral stiffness and solid axle geometry in the mechanical model are not neglected. Responses to lateral input as well as responses to statistical unevennesses show considerable improvement of passengers comfort and safety when cornering.

  16. Magnetic suspension - Today's marvel, tomorrow's tool

    Science.gov (United States)

    Lawing, Pierce L.

    1989-01-01

    NASA's Langley facility has through constant advocacy of magnetic suspension systems (MSSs) for wind-tunnel model positioning obtained a technology-development status for the requisite large magnets, computers, automatic control techniques, and apparatus configurations, to contemplate the construction of MSSs for large wind tunnels. Attention is presently given to the prospects for MSSs in wind tunnels employing superfluid helium atmospheres to obtain very high Reynolds numbers, where the MSS can yield substantial enhancements of wind tunnel productivity.

  17. Geometrical analysis of suspension flows near jamming

    Science.gov (United States)

    Wyart, Matthieu

    2012-02-01

    The viscosity of suspensions was computed early on by Einstein and Batchelor in the dilute regime. At high density however, their rheology remains mystifying. As the packing fraction increases, steric hindrance becomes dominant and particles move under stress in a more and more coordinated way. Eventually, the viscosity diverges as the suspension jams into an amorphous solid. Such a jamming transition is reminiscent of critical points: the rheology displays scaling and a diverging length scale. Jamming bear similarities with the glass transition where steric hindrance is enhanced under cooling, and where the dynamics is also observed to become more and more collective as it slows down. In all these examples, understanding the nature of the collective dynamics and the associated rheology remains a challenge. Recent progress has been made however on a related problem, the unjamming transition where a solid made of repulsive soft particles is isotropically decompressed toward vanishing pressure. In this situation various properties of the amorphous solid, such as elasticity, transport or force propagation, display scaling with the distance to threshold. Theoretically these observations can be shown to stem from the presence of soft modes in the vibrational spectrum, a result that can be extended to thermal colloidal glasses as well. Here we focus on particles driven by shear at zero temperature. We show that if hydrodynamical interactions are neglected an analogy can be made between the rheology of such a suspension and the elasticity of simple networks, building a link between the jamming and the unjamming transition. This analogy enables us to unify in a common framework key aspects of the elasticity of amorphous solids with the rheology of dense suspensions, and to relate features of the latter to the geometry of configurations visited under flow.

  18. Torsional asymmetry in suspension bridge systems

    Czech Academy of Sciences Publication Activity Database

    Malík, Josef

    2015-01-01

    Roč. 60, č. 6 (2015), s. 677-701 ISSN 0862-7940 R&D Projects: GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : suspension bridge * Hamilton principle * vertical and torsional oscillation * uniqueness * existence Subject RIV: BA - General Mathematics Impact factor: 0.507, year: 2015 http://link.springer.com/article/10.1007%2Fs10492-015-0117-3

  19. Compounded Apixaban Suspensions for Enteral Feeding Tubes.

    Science.gov (United States)

    Caraballo, Maria L; Donmez, Seda; Nathan, Kobi; Zhao, Fang

    2017-07-01

    Objective: There is limited information on compounded apixaban formulations for administration via enteral feeding tubes. This study was designed to identify a suitable apixaban suspension formulation that is easy to prepare in a pharmacy setting, is compatible with commonly used feeding tubes, and has a beyond-use date of 7 days. Methods: Apixaban suspensions were prepared from commercially available 5-mg Eliquis tablets. Several vehicles and compounding methods were screened for ease of preparation, dosage accuracy, and tube compatibility. Two tubing types, polyurethane and polyvinyl chloride, with varying lengths and diameters, were included in the study. They were mounted on a peg board during evaluation to mimic the patient body position. A 7-day stability study of the selected formulation was also conducted. Results: Vehicles containing 40% to 60% Ora-Plus in water all exhibited satisfactory flowability through the tubes. The mortar/pestle compounding method was found to produce more accurate and consistent apixaban suspensions than the pill crusher or crushing syringe method. The selected formulation, 0.25 mg/mL apixaban in 50:50 Ora-Plus:water, was compatible with both tubing types, retaining >98% drug in posttube samples. The stability study also confirmed that this formulation was stable physically and chemically over 7 days of storage at room temperature. Conclusions: A suitable apixaban suspension formulation was identified for administration via enteral feeding tubes. The formulation consisted of 0.25 mg/mL apixaban in 50:50 Ora-Plus:water. The stability study results supported a beyond-use date of 7 days at room temperature.

  20. Spectral analysis connected with suspension bridge systems

    Czech Academy of Sciences Publication Activity Database

    Malík, Josef

    2016-01-01

    Roč. 81, č. 1 (2016), s. 42-75 ISSN 0272-4960 R&D Projects: GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : suspension bridge * vertical and torsional oscillation * eigenvalue * eigenvector * flutter Subject RIV: JM - Building Engineering Impact factor: 0.945, year: 2016 http://imamat.oxfordjournals.org/content/early/2015/09/16/imamat.hxv027.short?rss=1

  1. Design of a suspension system and determining suspension parameters of a medium downforce small Formula type car

    Directory of Open Access Journals (Sweden)

    Biswal Sadjyot

    2017-01-01

    Full Text Available The focus of the paper is on designing a suspension system for a medium downforce small Formula type race car. The paper not only focusses on step by step design for a double wishbone type suspension but will also show the use and role of kinematics software in determining the optimized suspension of the car. The paper will also focus on the use of tire data in determining suspension parameters and the design of the double wishbone suspension. Various parameters, their design importance and the process to optimize them according to suspension design goals will be covered. The easiest and best ways to change the suspension parameters to get the best results will also be covered.

  2. Assessment of railway wagon suspension characteristics

    Science.gov (United States)

    Soukup, Josef; Skočilas, Jan; Skočilasová, Blanka

    2017-05-01

    The article deals with assessment of railway wagon suspension characteristics. The essential characteristics of a suspension are represented by the stiffness constants of the equivalent springs and the eigen frequencies of the oscillating movements in reference to the main central inertia axes of a vehicle. The premise of the experimental determination of these characteristic is the knowledge of the gravity center position and the knowledge of the main central inertia moments of the vehicle frame. The vehicle frame performs the general spatial movement when the vehicle moves. An analysis of the frame movement generally arises from Euler's equations which are commonly used for the description of the spherical movement. This solution is difficult and it can be simplified by applying the specific assumptions. The eigen frequencies solutions and solutions of the suspension stiffness are presented in the article. The solutions are applied on the railway and road vehicles with the simplifying conditions. A new method which assessed the characteristics is described in the article.

  3. Asystole following Reintubation during Suspension Laryngoscopy

    Directory of Open Access Journals (Sweden)

    Sheryl H. Glassman

    2012-01-01

    Full Text Available Transient increase in heart rate and mean arterial pressure commonly occur during manipulation of the airway via direct laryngoscopy. This phenomenon is understood to be due to a sympathetic nervous system reflex causing an increase in plasma catecholamines. Rarely, severe bradycardia and possible asystole can occur following laryngoscopy. One previous report described asystole during suspension laryngoscopy after uneventful direct laryngoscopy. Here we report a case of asystole occurring at the time of reinsertion and cuff inflation of an endotracheal tube in a patient who had been hemodynamically stable during initial direct laryngoscopy and the ensuing suspension laryngoscopy. The asystole was immediately recognized and successful cardiopulmonary resuscitation was performed with the patient returning to baseline sinus rhythm. Cardiac arrest following laryngoscopy is rare. This case highlights the importance of continued vigilance even after the initial manipulations of the airway by both direct laryngoscopy and suspension laryngoscopy are to be performed. Identifying patients who may benefit from premedication with a vagolytic drug may prevent adversity. Preoperative heart rate analysis can identify patients with strong vagal tone.

  4. Core Muscle Activation in Suspension Training Exercises.

    Science.gov (United States)

    Cugliari, Giovanni; Boccia, Gennaro

    2017-02-01

    A quantitative observational laboratory study was conducted to characterize and classify core training exercises executed in a suspension modality on the base of muscle activation. In a prospective single-group repeated measures design, seventeen active male participants performed four suspension exercises typically associated with core training (roll-out, bodysaw, pike and knee-tuck). Surface electromyographic signals were recorded from lower and upper parts of rectus abdominis, external oblique, internal oblique, lower and upper parts of erector spinae muscles using concentric bipolar electrodes. The average rectified values of electromyographic signals were normalized with respect to individual maximum voluntary isometric contraction of each muscle. Roll-out exercise showed the highest activation of rectus abdominis and oblique muscles compared to the other exercises. The rectus abdominis and external oblique reached an activation higher than 60% of the maximal voluntary contraction (or very close to that threshold, 55%) in roll-out and bodysaw exercises. Findings from this study allow the selection of suspension core training exercises on the basis of quantitative information about the activation of muscles of interest. Roll-out and bodysaw exercises can be considered as suitable for strength training of rectus abdominis and external oblique muscles.

  5. Physical gelation of a microfiber suspension.

    Science.gov (United States)

    Perazzo, Antonio; Nunes, Janine K.; Guido, Stefano; Stone, Howard A.

    2015-11-01

    Hydrogels are among the most exploited materials in tissue engineering and there is growing interest in injectable hydrogels, especially as applied to surgical adhesives and bioprinting materials. Here we report a method to produce a hydrogel in a desired location by simply extruding a suspension of high aspect ratio and flexible microfibers from a syringe. The mechanism of gel formation is purely physical and based on irreversible entanglements formed by the microfibers under the action of flow. The single microfibers have been produced and finely tailored by microfluidic methods. Shear rheology has been performed in order to get insights on the entanglements, and results show that the formation of entanglements is related to a shear thickening behavior of the suspension, which in turn depends on shear rate and concentration of fibers. When shearing the suspension, highly non-linear viscoelastic behavior is observed and probed by a highly positive first normal stress difference. We also report the hydrogel swelling behavior and its linear viscoelastic properties as obtained by imposing small oscillatory stress to the material.

  6. Armoring confined bubbles in concentrated colloidal suspensions

    Science.gov (United States)

    Yu, Yingxian; Khodaparast, Sepideh; Stone, Howard

    2016-11-01

    Encapsulation of a bubble with microparticles is known to significantly improve the stability of the bubble. This phenomenon has recently gained increasing attention due to its application in a variety of technologies such as foam stabilization, drug encapsulation and colloidosomes. Nevertheless, the production of such colloidal armored bubble with controlled size and particle coverage ratio is still a great challenge industrially. We study the coating process of a long air bubble by microparticles in a circular tube filled with a concentrated microparticles colloidal suspension. As the bubble proceeds in the suspension of particles, a monolayer of micro-particles forms on the interface of the bubble, which eventually results in a fully armored bubble. We investigate the phenomenon that triggers and controls the evolution of the particle accumulation on the bubble interface. Moreover, we examine the effects of the mean flow velocity, the size of the colloids and concentration of the suspension on the dynamics of the armored bubble. The results of this study can potentially be applied to production of particle-encapsulated bubbles, surface-cleaning techniques, and gas-assisted injection molding.

  7. A universal suspension test rig for electrohydraulic active and passive automotive suspension system

    Directory of Open Access Journals (Sweden)

    Mahmoud Omar

    2017-12-01

    Full Text Available A fully active electro-hydraulic and passive automotive quarter car suspensions with their experimental test-rigs are designed and implemented. Investigation of the active performance compared against the passive is performed experimentally and numerically utilizing SIMULINK's Simscape library. Both systems are modeled as single-degree-of-freedom in order to simplify the validation process. Economic considerations were considered during the rig's implementation. The rig consists of two identical platforms fixed side by side allowing testing two independent suspensions simultaneously. Position sensors for sprung and unsprung masses on both platforms are installed. The road input is introduced by a cam and a roller follower mechanism driven by 1.12 kW single phase induction motor with speed reduction assembly. The active hydraulic cylinder was the most viable choice due to its high power-to-weight ratio. The active control is of the proportional-integral-differential (PID type. Though this technique is quite simple and not new, yet the emphasis of this paper is the engineering, design and implementation of the experimental setup and controller. A successful validation process is performed. Ride comfort significantly improved with active suspension, as shown by the results; 24.8% sprung mass vibration attenuation is achieved. The details of the developed system with the analytical and experimental results are presented. Keywords: Active suspension, Passive suspension, Servo, Hydraulic, Control, PID

  8. Domogis: prototipo de un interfaz del sistema de control de un edificio integrado en un SIG

    Directory of Open Access Journals (Sweden)

    Álvarez, M.

    2010-06-01

    Full Text Available This paper deals with of a the use of Geographical Information Systems (GIS for domotic control. The foccus is put on the communication interface between the building control system (BCS integrated in a GIS. For get this aim, the GIS of the Montegancedo Campus where is located the Facultad de infomatica of UPM and the creation of an interface is needed. The implemented interface in Microsoft C# language allows the control, monotorizing and management of the sensors data installated in the Campus.

    Este trabajo trata de la utilización de los Sistemas de Información Geográfica (SIG en uno de las nuevos requerimientos de la arquitectura, el control domótico. El objetivo es el desarrollo de un interfaz de comunicación del Sistema de Control de un Edificio (SCE integrado en un SIG. La consecución de este objetivo implica previamente el desarrollo del SIG del Campus de Montegancedo sede de la Facultad de Informática de la UPM y la creación de un interfaz integrado en el SIG, desarrollado en lenguaje de programacion C# de Microsoft. Este interfaz dirige al usuario en la realización de ciertas tareas de control domótico de las instalaciones urbanas y edificios del Campus universitario, como evaluar, monotorizar y gestionar datos procedentes de sensores estratégicamente situados en dicho Campus.

  9. Nivel de adecuación del territorio para el desarrollo de especies agrícolas y forestales en el Parque Nacional Nevado de Toluca

    Directory of Open Access Journals (Sweden)

    HÉCTOR HUGO REGIL-GARCÍA

    2009-01-01

    Full Text Available El Parque Nacional Nevado de Toluca es una importante reserva de recursos naturales del Estado de México. En la recuperación de los ecosistemas forestales se planteó como objetivo determinar el grado de adecuación para el desarrollo de especies forestales nativas y cultivos en la zona. En este trabajo se presenta una metodología basada en la aplicación de sistemas de información geográfica (SIG para evaluar algunos requerimientos de las especies (climáticos, fisiográficos y edáficos y generar mapas criterios de adecuación. El análisis permitió obtener la ocupación óptima del suelo de cuatro especies forestales y dos especies agrícolas.

  10. Primeros debates sobre legislación del uso de drogas en Argentina a comienzos del siglo XX: la propuesta del Dr. Leopoldo Bard y su contexto sociohistórico

    Directory of Open Access Journals (Sweden)

    Victoria Sánchez Antelo

    2012-01-01

    Full Text Available Este trabajo analiza los discursos del médico higienista argentino Leopoldo Bard a partir de tres publicaciones que realizó entre 1923 y 1933 sobre toxicomanías. Las mismas condensan los debates en torno al papel del Estado, de las políticas públicas nacionales, regionales y, particularmente, la influencia norteamericana en Argentina a través de su figura. Las medidas legislativas y políticas de la época, de indudable corte represivo, fueron significativas para los avances del Estado en la esfera privada, la creciente importancia de los cuerpos profesionales en la definición de fronteras materiales y simbólicas sobre lo socialmente aceptable, incluyendo lo relativo al consumo de drogas. También se destacan los múltiples propósitos que parecen satisfacer estas políticas: en el plano local habilitan otras formas de represión de los conflictos derivados de la inmigración mientras que, en el internacional, complacen a los requerimientos norteamericanos.

  11. Numerical homogenization on approach for stokesian suspensions.

    Energy Technology Data Exchange (ETDEWEB)

    Haines, B. M.; Berlyand, L. V.; Karpeev, D. A. (Mathematics and Computer Science); (Department of Mathematics, Pennsylvania State Univ.)

    2012-01-20

    In this technical report we investigate efficient methods for numerical simulation of active suspensions. The prototypical system is a suspension of swimming bacteria in a Newtonian fluid. Rheological and other macroscopic properties of such suspensions can differ dramatically from the same properties of the suspending fluid alone or of suspensions of similar but inactive particles. Elongated bacteria, such as E. coli or B. subtilis, swim along their principal axis, propelling themselves with the help of flagella, attached at the anterior of the organism and pushing it forward in the manner of a propeller. They interact hydrodynamically with the surrounding fluid and, because of their asymmetrical shape, have the propensity to align with the local flow. This, along with the dipolar nature of bacteria (the two forces a bacterium exerts on a fluid - one due to self-propulsion and the other opposing drag - have equal magnitude and point in opposite directions), causes nearby bacteria to tend to align, resulting in a intermittent local ordering on the mesoscopic scale, which is between the microscopic scale of an individual bacterium and the macroscopic scale of the suspension (e.g., its container). The local ordering is sometimes called a collective mode or collective swimming. Thanks to self-propulsion, collective modes inject momentum into the fluid in a coherent way. This enhances the local strain rate without changing the macroscopic stress applied at the boundary of the container. The macroscopic effective viscosity of the suspension is defined roughly as the ratio of the applied stress to the bulk strain rate. If local alignment and therefore local strain-rate enhancement, are significant, the effective viscosity can be appreciably lower than that of the corresponding passive suspension or even of the surrounding fluid alone. Indeed, a sevenfold decrease in the effective viscosity was observed in experiments with B. subtilis. More generally, local collective

  12. Toward a general psychological model of tension and suspense.

    Science.gov (United States)

    Lehne, Moritz; Koelsch, Stefan

    2015-01-01

    Tension and suspense are powerful emotional experiences that occur in a wide variety of contexts (e.g., in music, film, literature, and everyday life). The omnipresence of tension and suspense suggests that they build on very basic cognitive and affective mechanisms. However, the psychological underpinnings of tension experiences remain largely unexplained, and tension and suspense are rarely discussed from a general, domain-independent perspective. In this paper, we argue that tension experiences in different contexts (e.g., musical tension or suspense in a movie) build on the same underlying psychological processes. We discuss key components of tension experiences and propose a domain-independent model of tension and suspense. According to this model, tension experiences originate from states of conflict, instability, dissonance, or uncertainty that trigger predictive processes directed at future events of emotional significance. We also discuss possible neural mechanisms underlying tension and suspense. The model provides a theoretical framework that can inform future empirical research on tension phenomena.

  13. Potencial del Agua del suelo

    Directory of Open Access Journals (Sweden)

    Bustamante Heliodoro

    1986-12-01

    Full Text Available La energía potencial del agua presenta diferencias de un punto del suelo a otro; esas diferencias son las que originan el movimiento del agua de acuerdo a la tendencia universal de la materia en el sentido de moverse de donde la energía potencial es mayor a donde dicha energía es menor. En el suelo el agua en consecuencia se mueve hacia donde su energía decrece hasta lograr su estado de equilibrio. Se desprende entonces que la cantidad de energía potencial absoluta contenida en el agua, no es importante por sí misma, sino por su relación con la energía en diferentes lugares dentro del suelo. El concepto Potencial de agua del suelo es un criterio para esta energía.

  14. Effective viscous flow properties for fiber suspensions under concentrated conditions

    International Nuclear Information System (INIS)

    Christensen, R.M.

    1993-01-01

    The effective longitudinal and transverse shear viscosities are derived for an aligned fiber suspension. The solutions are valid under very concentrated conditions for a hexagonal arrangement of the single size fibers. The results compliment the classical dilute suspension forms at the other extreme of concentration. Empirical forms are constructed to cover the full range of volume fraction of the fiber phase. Also, single size spherical particle suspensions are given a similar treatment to that of the fiber case

  15. Análisis, sistematización y elaboración de propuestas de mejora en el tratamiento de casos de violencia contra la mujer en aplicación de las normas del Nuevo Código Procesal Penal

    OpenAIRE

    Pita Chávez, Julia Mercedes

    2014-01-01

    Este trabajo tiene como objetivo el examen de la aplicación de las normas del Nuevo Código Procesal Penal desde una perspectiva de género como respuesta a los requerimientos propios de la mujeres víctimas de delitos de violencia de género, específicamente: 1) los delitos contra la salud integral (lesiones graves y leves), 2) delitos contra la libertad sexual (violación sexual de mujeres mayores de edad), 3) delitos contra la indemnidad sexual (violación sexual de menores y actos contra el pudo...

  16. Diseño de un Plan de Carrera y Sucesión por Competencias, en el departamento de Mantenimiento y Operación de la Subgerencia de Producción para la Unidad de Negocio Termopichincha, de la Corporación Eléctrica del Ecuador, CELEC EP

    OpenAIRE

    Chalá Meza, Cristian Paúl

    2016-01-01

    La presente investigación, pretende diseñar planes de carrera y sucesión, en base al Modelado de Perfiles por Competencias (MPC), metodología de la empresa Alfredo Paredes y Asociados, en la Unidad de Negocio Termopichincha, de la Corporación Eléctrica del Ecuador, CELEC EP. La planeación de la carrera, permite analizar y determinar rutas de carrera de los cargos, de manera horizontal y/o vertical, en base a los requerimientos y diferencias de cada cargo. La planeación de la sucesión colabor...

  17. Composición del mercado nacional de alimentos balanceados para tilapia en Costa Rica

    Directory of Open Access Journals (Sweden)

    Ruth Vargas

    2003-01-01

    Full Text Available Se evaluó el origen y proceso de fabricación de los alimentos balanceados para tilapias comercializados en el país e inscritos en el Programa de Registro y Control de Calidad de Alimentos Balanceados para Animales del Ministerio de Agricultura y Ganadería. Además, se determinaron las prescripciones según la fase fisiol ógica y su composición química, así como las relaciones proteína cruda versus energía metabolizable y calcio – fósforo para compararlos contra los requerimientos recomendados. La calidad física fue evaluada en términos del tamaño de part ícula versus el tamaño del pez. El estudio de mercado consider ó el precio de venta de cada unidad de nutriente y su relaci ón que aportan los alimentos disponibles. Se determinó que un 82,35% de los registros son de origen nacional, un 88,23% de los alimentos son producidos por extrusión, y un 41% de las fórmulas son ofrecidas para todos los estadios, lo que provoca poca sustentación para comparar contra los requerimientos; a manera de ejemplo metodológico se determinó que los contenidos de proteína cruda de aquéllas fórmulas que son ofrecidas para alevines concuerdan con los niveles recomendados por la literatura. La situación de la calidad fí- sica es más crítica, por cuanto solamente un 23,53% de las garantías indican el tamaño del gránulo. Dado que el estudio de mercado arrojó que de las 17 garantías solamente se comercializan cinco se concluyó que comparar los alimentos por los precios unitarios de los nutrientes no coadyuva tampoco en la escogencia del alimento de manera importante.

  18. Neural control of magnetic suspension systems

    Science.gov (United States)

    Gray, W. Steven

    1993-01-01

    The purpose of this research program is to design, build and test (in cooperation with NASA personnel from the NASA Langley Research Center) neural controllers for two different small air-gap magnetic suspension systems. The general objective of the program is to study neural network architectures for the purpose of control in an experimental setting and to demonstrate the feasibility of the concept. The specific objectives of the research program are: (1) to demonstrate through simulation and experimentation the feasibility of using neural controllers to stabilize a nonlinear magnetic suspension system; (2) to investigate through simulation and experimentation the performance of neural controllers designs under various types of parametric and nonparametric uncertainty; (3) to investigate through simulation and experimentation various types of neural architectures for real-time control with respect to performance and complexity; and (4) to benchmark in an experimental setting the performance of neural controllers against other types of existing linear and nonlinear compensator designs. To date, the first one-dimensional, small air-gap magnetic suspension system has been built, tested and delivered to the NASA Langley Research Center. The device is currently being stabilized with a digital linear phase-lead controller. The neural controller hardware is under construction. Two different neural network paradigms are under consideration, one based on hidden layer feedforward networks trained via back propagation and one based on using Gaussian radial basis functions trained by analytical methods related to stability conditions. Some advanced nonlinear control algorithms using feedback linearization and sliding mode control are in simulation studies.

  19. Stability of an extemporaneously prepared thalidomide suspension.

    Science.gov (United States)

    Kraft, Shawna; Johnson, Cary E; Tyler, Ryan P

    2012-01-01

    The short-term physical and chemical stability of an oral suspension of thalidomide 20 mg/mL was studied. An oral suspension of thalidomide 20 mg/mL was prepared by emptying the contents of 12 100-mg thalidomide capsules into a glass mortar; 30 mL of Ora-Plus and 30 mL of Ora-Sweet were mixed and added to the thalidomide powder to make a final volume of 60 mL. Three identical samples of the formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and stored under refrigeration (3-5 °C). A 1-mL sample was withdrawn from each of the three samples with a micropipette immediately after preparation and at 7, 14, 21, 28, and 35 days. After further dilution to an expected concentration of 20 μg/mL with acetonitrile-methanol and then dilution with mobile phase, the samples were assayed in duplicate using stability-indicating high-performance liquid chromatography. Stability was determined by evaluating the percentage of the initial concentration remaining at each time point; stability was defined as the retention of at least 90% of the initial concentration of thalidomide. At least 92% of the initial thalidomide concentration remained throughout the 35-day study period. There were no detectable changes in color, odor, or pH and no visible microbial growth in any sample. An extemporaneously prepared suspension of thalidomide 20 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet was stable for at least 35 days when stored in 2-oz amber plastic bottles under refrigeration.

  20. Stability of an extemporaneously prepared tadalafil suspension.

    Science.gov (United States)

    Pettit, Rebecca S; Johnson, Cary E; Caruthers, Regine L

    2012-04-01

    The stability of an extemporaneously prepared tadalafil oral suspension was studied. An oral suspension of tadalafil 5 mg/mL was prepared by thoroughly grinding 15 20-mg tadalafil tablets in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of Ora-Sweet were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of the formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and stored at room temperature (23-25 °C). A 1-mL sample was withdrawn from each of the three bottles with a micropipette immediately after preparation and at 7, 14, 28, 57, and 91 days. After double dilution (1:10 and 0.1:5 v/v) to an expected concentration of 10 μg/mL with methanol and mobile phase, respectively, the samples were assayed in duplicate using stability-indicating high-performance liquid chromatography. The samples were visually examined for any color change and evaluated for pH changes on each day of analysis. Taste evaluation was performed at the beginning and end of the study. Stability was defined as the retention of at least 90% of the initial concentration. At least 99% of the initial tadalafil concentration remained throughout the 91-day study period. There were no detectable changes in color, odor, taste, and pH, and no visible microbial growth was observed in any sample. An extemporaneously prepared suspension of tadalafil 5 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet was stable for at least 91 days when stored in amber plastic bottles at room temperature.

  1. Stability of extemporaneously prepared moxifloxacin oral suspensions.

    Science.gov (United States)

    Hutchinson, David J; Johnson, Cary E; Klein, Kristin C

    2009-04-01

    The stability of extemporaneously prepared moxifloxacin oral suspensions was studied. An oral suspension of moxifloxacin 20 mg/mL was prepared by thoroughly grinding three 400-mg tablets of moxifloxacin in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of either Ora-Sweet or Ora-Sweet SF were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of each formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and were stored at room temperature (23-25 degrees C). A 1-mL sample was withdrawn from each of the six bottles with a micropipette immediately after preparation and at 7, 14, 28, 60, and 90 days. After further dilution to an expected concentration of 8 microg/ mL with sample diluent, the samples were assayed in duplicate by stability-indicating high-performance liquid chromatography. Stability was defined as the retention of at least 90% of the initial concentration. At least 99% of the initial moxifloxacin remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH and no visible microbial growth in any sample. Extemporaneously compounded suspensions of moxifloxacin 20 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet or Ora-Sweet SF were stable for at least 90 days when stored in 2-oz amber plastic bottles at room temperature.

  2. Stability of extemporaneously prepared glycopyrrolate oral suspensions.

    Science.gov (United States)

    Cober, Mary Petrea; Johnson, Cary E; Sudekum, David; Penprase, Kimberly

    2011-05-01

    The stability of extemporaneously prepared glycopyrrolate 0.5-mg/mL suspensions was evaluated. An oral suspension of glycopyrrolate 0.5 mg/mL was prepared by thoroughly grinding 30 1-mg tablets of glycopyrrolate in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of either Ora-Sweet or Ora-Sweet SF were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of the formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and stored at room temperature (23-25 °C). A 1-mL sample was withdrawn from each of the three bottles with a micropipette immediately after preparation and 7, 15, 30, 60, and 90 days afterward. After further dilution to an expected concentration of 50 μg/mL with sample diluent, the samples were assayed in duplicate by stability-indicating high-performance liquid chromatography. The samples were visually examined for any color change and evaluated for pH on each day of analysis. Taste evaluations were performed at the beginning and end of the study. Stability was defined as the retention of at least 90% of the initial concentration. At least 95% of the initial glycopyrrolate remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH, and no visible microbial growth was observed in any sample. Extemporaneously compounded suspensions of glycopyrrolate 0.5 mg/mL in a 1:1 mixture of Ora-Plus/Ora-Sweet or Ora-Plus/Ora-Sweet SF were stable for at least 90 days when stored in amber plastic bottles at room temperature.

  3. Stability of extemporaneously prepared rifaximin oral suspensions.

    Science.gov (United States)

    Cober, Mary Petrea; Johnson, Cary E; Lee, Jordan; Currie, Kenne

    2010-02-15

    The stability of extemporaneously prepared rifaximin oral suspensions was studied. An oral suspension of rifaximin 20 mg/mL was prepared by thoroughly grinding six 200-mg tablets of rifaximin in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of either Ora-Sweet or Ora-Sweet SF were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of each formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and were stored at room temperature (23-25 degrees C). A 1-mL sample was withdrawn from each of the six bottles with a micropipette immediately after preparation and at 7, 15, 30, and 60 days. After further dilution to an expected concentration of 20 microg/mL with mobile phase, the samples were assayed in duplicate using stability-indicating high-performance liquid chromatography. The samples were visually examined for any color change and pH was tested on each day of analysis. Stability was determined by evaluating the percentage of the initial concentration remaining at each time point and defined as retention of at least 90% of the initial concentration of rifaximin. At least 99% of the initial rifaximin remained throughout the 60-day study period in both preparations. There were no detectable changes in color, odor, taste, or pH and no visible microbial growth in any sample. Extemporaneously prepared suspensions of rifaximin 20 mg/mL in 1:1 mixtures of Ora-Plus with either Ora-Sweet or Ora-Sweet SF were stable for at least 60 days when stored in 2-oz amber plastic bottles at room temperature.

  4. Active Electromechanical Suspension System for Planetary Rovers, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Balcones Technologies, LLC proposes to adapt actively controlled suspension technology developed by The University of Texas at Austin Center for Electromechanics...

  5. Magnetic suspension and guidance of high speed vehicles. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Alston, I A; Clark, J M; Hayden, J T

    1972-12-01

    Technical and economical assessments of magnetic suspensions for high speed vehicles and transport systems are reported. In these suspensions the suspending magnet takes the form of a powerful superconducting electromagnet that induces currents while it moves over conducting sheets or loops. A number of vehicle track designs are evaluated for operating cost effectiveness. It is shown that propulsion systems using power collected from the track are more expensive than those using power generated onboard the vehicle, and that the conducting sheet suspension is slightly more expensive than the null flux suspension.

  6. A microsphere suspension model of metamaterial fluids

    Directory of Open Access Journals (Sweden)

    Qian Duan

    2017-05-01

    Full Text Available Drawing an analogy to the liquid phase of natural materials, we theoretically propose a microsphere suspension model to realize a metamaterial fluid with artificial electromagnetic indexes. By immersing high-ε, micrometer-sized dielectric spheres in a low-ε insulating oil, the structured fluid exhibits liquid-like properties from dispersing phase as well as the isotropic negative electromagnetic parameters caused by Mie resonances from dispersed microspheres. The work presented here will benefit the development of structured fluids toward metamaterials.

  7. Stability of extemporaneously prepared rufinamide oral suspensions.

    Science.gov (United States)

    Hutchinson, David J; Liou, Yayin; Best, Robert; Zhao, Fang

    2010-03-01

    Rufinamide is an oral antiepileptic drug indicated for adjunctive therapy in treating generalized seizures associated with Lennox-Gastaut syndrome. Currently, rufinamide is available as 200-mg and 400-mg tablets. A liquid dosage form does not exist at the present time. Lack of a suspension formulation may present an administration problem for many children and adults who are unable to swallow tablets. The availability of a liquid dosage form will provide an easy and accurate way to measure and administer the medication. To determine the stability of both sugar-containing and sugar-free rufinamide suspensions over a 90-day period. A suspension of rufinamide 40 mg/mL was prepared by grinding twelve 400-mg tablets of rufinamide tablets in a glass mortar. Sixty milliliters of Ora-Plus and 60 mL of either Ora-Sweet or Ora-Sweet SF (sugar free) were mixed and added to the powder to make a final volume of 120 mL. Three identical samples of each formulation were prepared and placed in 60-mL amber plastic bottles and were stored at room temperature. A 1-mL sample was withdrawn from each of the 6 bottles with a micropipette immediately after preparation and at 7, 14, 28, 56, and 90 days. After further dilution to an expected concentration of 0.4 mg/mL, the samples were assayed using high-performance liquid chromatography. Stability was defined as the retention of at least 90% of the initial concentration. At least 90% of the initial rufinamide concentration remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH and no visible microbial growth. Extemporaneously compounded suspensions of rufinamide 40 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet or Ora-Sweet SF were stable for at least 90 days when stored in 59-mL amber polypropylene plastic bottles at room temperature.

  8. Conductivity maximum in a charged colloidal suspension

    Energy Technology Data Exchange (ETDEWEB)

    Bastea, S

    2009-01-27

    Molecular dynamics simulations of a charged colloidal suspension in the salt-free regime show that the system exhibits an electrical conductivity maximum as a function of colloid charge. We attribute this behavior to two main competing effects: colloid effective charge saturation due to counterion 'condensation' and diffusion slowdown due to the relaxation effect. In agreement with previous observations, we also find that the effective transported charge is larger than the one determined by the Stern layer and suggest that it corresponds to the boundary fluid layer at the surface of the colloidal particles.

  9. Simulations of magnetorheological suspensions in Poiseuille flow

    Energy Technology Data Exchange (ETDEWEB)

    Pappas, Yannis; Klingenberg, Daniel J. [University of Wisconsin-Madison, Department of Chemical and Biological Engineering, Madison, WI (United States)

    2006-06-15

    Particle-level simulations are conducted to study magnetorheological fluids in plane Poiseuille flow. The importance of the boundary conditions for the particles at the channel walls is examined by considering two extreme cases: no friction and infinite coefficient of friction. The inclusion of friction produces Bingham fluid behavior, as commonly observed experimentally for MR suspensions. Lamellar structures, similar to those reported for electrorheological fluids in shear flow, are observed in the post-yield region for both particle boundary conditions. The formation of these lamellae is accompanied by an increase in the bulk fluid velocity. The slip boundary condition produces higher fluid velocities and thicker lamellar structures. (orig.)

  10. Thermocouple pressure bushing in suspension rod

    International Nuclear Information System (INIS)

    Pasek, J.; Ondreicka, K.

    1975-01-01

    The seal is described of jacket thermocouples located in the pressure reducer in the fuel element suspension rod. The thermocouples are sealed in the pressure reducer with a silicon sealing compound. The sealing compound is compressed between the two reducers with a Bellevile spring and a pressure washer secured in position with a spring. The axial pressure of the inner parts of the reducer on the compound is adjustable by means of a thrust screw. The tightness and alignment of the thermocouples in the pressure reducer is achieved by tightening the thrust screw to the stop of the top reducer and the subsequent setting of the sealing compound. (J.B.)

  11. Intrinsic viscosity of a suspension of cubes

    KAUST Repository

    Mallavajula, Rajesh K.

    2013-11-06

    We report on the viscosity of a dilute suspension of cube-shaped particles. Irrespective of the particle size, size distribution, and surface chemistry, we find empirically that cubes manifest an intrinsic viscosity [η]=3.1±0.2, which is substantially higher than the well-known value for spheres, [η]=2.5. The orientation-dependent intrinsic viscosity of cubic particles is determined theoretically using a finite-element solution of the Stokes equations. For isotropically oriented cubes, these calculations show [η]=3.1, in excellent agreement with our experimental observations. © 2013 American Physical Society.

  12. Effect of suspension characteristics on in-flight particle properties and coating microstructures achieved by suspension plasma spray

    Science.gov (United States)

    Aubignat, E.; Planche, M. P.; Allimant, A.; Billières, D.; Girardot, L.; Bailly, Y.; Montavon, G.

    2014-11-01

    This paper focuses on the influence of suspension properties on the manufacturing of coatings by suspension plasma spraying (SPS). For this purpose, alumina suspensions were formulated with two different liquid phases: water and ethanol. Suspensions were atomized with a twin-fluid nozzle and injected in an atmospheric plasma jet. Suspension injection was optimized thanks to shadowgraphy observations and drop size distribution measurements performed by laser diffraction. In-flight particle velocities were evaluated by particle image velocimetry. In addition, splats were collected on glass substrates, with the same conditions as the ones used during the spray process. Scanning electron microscopy (SEM) and profilometry analyses were then performed to observe the splat morphology and thus to get information on plasma / suspension interactions, such as particle agglomeration. Finally, coatings were manufactured, characterized by SEM and compared to each other.

  13. Drug release from non-aqueous suspensions. II. The release of methylxanthines from paraffin suspensions

    NARCIS (Netherlands)

    Blaey, C.J. de; Fokkens, J.G.

    1984-01-01

    The release of 3 methylxanthines, i.e. caffeine, theobromine and theophylline, from suspensions in liquid paraffin to an aqueous phase was determined in an in vitro apparatus. The release rates were determined as a function of the pH of the aqueous phase. It was proved that the release process was

  14. Contabilidad del impuesto sobre beneficios y resultado global: relevancia valorativa en el mercado financiero español

    Directory of Open Access Journals (Sweden)

    Constancio Zamora Ramírez

    2014-07-01

    Full Text Available La contabilidad del impuesto sobre beneficios ha sido un tema profusamente tratado en la literatura académica y que actualmente se encuentra a la espera de un borrador para su reforma en el seno del International Accounting Standard Board (IASB. Por otro lado, a pesar de que la normativa contable se ha orientado hacia un reconocimiento del efecto impositivo en base a diferencias temporarias, la investigación empírica se ha centrado en el desarrollo de modelos en base al efecto sobre pérdidas y ganancias obviando su efecto sobre el resultado global. A través de un modelo desarrollado sobre la base del propuesto por Ohlson en 1995, los activos y pasivos por impuestos diferidos repercuten en la valoración de las empresas que realiza el mercado. Los activos por impuesto diferidos presentan de forma significativa en los modelos desarrollados coeficientes negativos, lo que induce a pensar que el mercado considera que estos activos no pueden recuperarse bajo el modelo actual de negocio de la compañía y que deberían haber sido considerados como un mayor gasto por impuesto corriente. A la luz de estos resultados, las normas relativas a la contabilidad del impuesto sobre beneficios, deberían considerar un mayor contenido informativo en las cuentas anuales, así como un incremento en los requerimientos para el reconocimiento de activos.

  15. Boundary Effects and Shear Thickening of Colloidal Suspensions: A study based on measurement of Suspension Microstructure

    Science.gov (United States)

    Perera, M. Tharanga D.

    Microstructure is key to understanding rheological behaviors of flowing particulate suspensions. During the past decade, Stokesian Dynamics simulations have been the dominant method of determining suspension microstructure. Structure results obtained numerically reveal that an anisotropic structure is formed under high Peclet (Pe) number conditions. Researchers have used various experimental techniques such as small angle neutron scattering (SANS) and light scattering methods to validate microstructure. This work outlines an experimental technique based on confocal microscopy to study microstructure of a colloidal suspension in an index-matched fluid flowing in a microchannel. High resolution scans determining individual particle locations in suspensions 30-50 vol % yield quantitative results of the local microstructure in the form of the pair distribution function, g(r). From these experimentally determined g(r), the effect of shear rate, quantified by the Peclet number as a ratio of shear and Brownian stress, on the suspension viscosity and normal stress follow that seen in macroscopic rheological measurements and simulations. It is generally believed that shear thickening behavior of colloidal suspensions is driven by the formation of hydroclusters. From measurements of particle locations, hydroclusters are identified. The number of hydroclusters grows exponentially with increasing Pe, and the onset of shear thickening is driven by the increase in formation of clusters having 5-8 particles. At higher Pe, we notice the emergence of 12 or more particle clusters. The internal structure of these hydroclusters has been investigated, and there is some evidence that particles internal to hydroclusters preferentially align along the 45° and 135° axis. Beyond observations of bulk suspension behavior, the influence of boundaries on suspension microstructure is also investigated. Experiments were performed for suspensions flowing over smooth walls, made of glass

  16. Distribución espacial y temporal del carbono orgánico del suelo en los ecosistemas terrestres de México

    Directory of Open Access Journals (Sweden)

    Fernando Paz Pellat

    2016-07-01

    Full Text Available La distribución espacial del carbono orgánico de los suelos (COS y su inventario, definen los requerimientos mínimos (diagnóstico para el desarrollo de políticas públicas de medidas de mitigación de gases efecto invernadero. Las estimaciones del inventario del almacén del COS a escala global son dependientes de las fuentes de información y metodologías usadas, generalmente con alta incertidumbre. Los inventarios del COS en los ecosistemas terrestres en México se revisan en este trabajo y muestran variaciones importantes en las estimaciones nacionales, las cuales son dependientes de los datos utilizados y las consideraciones en la estimación de la densidad aparente y la fracción de fragmentos gruesos (>2mm. Bajo la consideración de que la dinámica del COS puede caracterizarse por los cambios en las clases de uso del suelo y vegetación (USyV del INEGI, se muestran los resultados de los patrones temporales del COS por USyV así como, de acuerdo con las clases de FAO, para los informes de evaluación de los recursos forestales mundiales. Los resultados muestran la necesidad crítica de desarrollo de políticas conjuntas entre los sectores forestales y agropecuarios. Finalmente, dada la información disponible en México y, para reducir las incertidumbres, se analiza la relación textura-COS por ecosistemas terrestres de México, caracterizando los valores máximos y mínimos del COS en función del porcentaje de arena de los suelos, a profundidades de 0 a 30 cm. Los análisis que se realizaron en este trabajo se discuten con la finalidad de establecer nuevos desarrollos futuros para reducir las incertidumbres en las estimaciones del COS, tanto en su caracterización espacial como su evolución temporal.

  17. Adaptive suspension strategy for a double wishbone suspension through camber and toe optimization

    Directory of Open Access Journals (Sweden)

    C. Kavitha

    2018-02-01

    Full Text Available A suspension system is responsible for the safety of vehicle during its manoeuvre. It serves the dual purpose of providing stability to the vehicle while providing a comfortable ride quality to the occupants. Recent trends in suspension system have focused on improving comfort and handling of vehicles while keeping the cost, space and feasibility of manufacturing in the constraint. This paper proposes a method for improving handling characteristics of a vehicle by controlling camber and toe angle using variable length arms in an adaptive manner. In order to study the effect of dynamic characteristics of the suspension system, a simulation study has been done in this work. A quarter car physical model with double wishbone suspension geometry is modelled in SolidWorks. It is then imported and simulated using SimMechanics platform in MATLAB. The output characteristics of the passive system (without variable length arms were validated on MSC ADAMS software. The adaptive system intends to improve vehicle handling characteristics by controlling the camber and toe angles. This is accomplished by two telescopic arms with an actuator which changes the camber and toe angle of the wheel dynamically to deliver best possible traction and manoeuvrability. Two PID controllers are employed to trigger the actuators based on the camber and toe angle from the sensors for reducing the error existing between the actual and desired value. The arms are driven by actuators in a closed loop feedback manner with help of a separate control system. Comparison between active and passive systems is carried out by analysing graphs of various parameters obtained from MATLAB simulation. From the results, it is observed that there is a reduction of 58% in the camber and 96% in toe gain. Hence, the system provides the scope of considerable adaptive strategy in controlling dynamic characteristics of the suspension system.

  18. Thermal transport phenomena in nanoparticle suspensions

    International Nuclear Information System (INIS)

    Cardellini, Annalisa; Fasano, Matteo; Bozorg Bigdeli, Masoud; Chiavazzo, Eliodoro; Asinari, Pietro

    2016-01-01

    Nanoparticle suspensions in liquids have received great attention, as they may offer an approach to enhance thermophysical properties of base fluids. A good variety of applications in engineering and biomedicine has been investigated with the aim of exploiting the above potential. However, the multiscale nature of nanosuspensions raises several issues in defining a comprehensive modelling framework, incorporating relevant molecular details and much larger scale phenomena, such as particle aggregation and their dynamics. The objectives of the present topical review is to report and discuss the main heat and mass transport phenomena ruling macroscopic behaviour of nanosuspensions, arising from molecular details. Relevant experimental results are included and properly put in the context of recent observations and theoretical studies, which solved long-standing debates about thermophysical properties enhancement. Major transport phenomena are discussed and in-depth analysis is carried out for highlighting the role of geometrical (nanoparticle shape, size, aggregation, concentration), chemical (pH, surfactants, functionalization) and physical parameters (temperature, density). We finally overview several computational techniques available at different scales with the aim of drawing the attention on the need for truly multiscale predictive models. This may help the development of next-generation nanoparticle suspensions and their rational use in thermal applications. (topical review)

  19. Magnetic separation from superparamagnetic particle suspensions

    International Nuclear Information System (INIS)

    Sinha, Ashok; Ganguly, Ranjan; Puri, Ishwar K.

    2009-01-01

    We investigate the magnetophoretic separation of magnetic microparticles from a non-dilute flow in a microfluidic channel and their subsequent field-induced aggregation under the influence of an externally applied magnetic force. This force induces dipolar interactions between the particles that aid in their separation from the flow. Existing analytical models for dilute suspensions cannot be extended to non-dilute suspensions in which interparticle magnetic interactions play an important role. We therefore conduct a parametric investigation of the mechanics of this problem in a microcapillary flow through simulations and experimental visualization. When a magnetic field is applied, the magnetic microparticles form an aggregate on the channel wall that is influenced by the competition between the holding magnetic force and the aggregate-depleting flow shear force. Microparticle collection in the aggregate increases linearly with increasing magnetic field strength and is characterized by distinct buildup and washaway phases. The collected microparticle volume fraction in an aggregate is found to depend on a single dimensional group that depends upon characteristic system parameters.

  20. Standardisation of magnetic nanoparticles in liquid suspension

    Science.gov (United States)

    Wells, James; Kazakova, Olga; Posth, Oliver; Steinhoff, Uwe; Petronis, Sarunas; Bogart, Lara K.; Southern, Paul; Pankhurst, Quentin; Johansson, Christer

    2017-09-01

    Suspensions of magnetic nanoparticles offer diverse opportunities for technology innovation, spanning a large number of industry sectors from imaging and actuation based applications in biomedicine and biotechnology, through large-scale environmental remediation uses such as water purification, to engineering-based applications such as position-controlled lubricants and soaps. Continuous advances in their manufacture have produced an ever-growing range of products, each with their own unique properties. At the same time, the characterisation of magnetic nanoparticles is often complex, and expert knowledge is needed to correctly interpret the measurement data. In many cases, the stringent requirements of the end-user technologies dictate that magnetic nanoparticle products should be clearly defined, well characterised, consistent and safe; or to put it another way—standardised. The aims of this document are to outline the concepts and terminology necessary for discussion of magnetic nanoparticles, to examine the current state-of-the-art in characterisation methods necessary for the most prominent applications of magnetic nanoparticle suspensions, to suggest a possible structure for the future development of standardisation within the field, and to identify areas and topics which deserve to be the focus of future work items. We discuss potential roadmaps for the future standardisation of this developing industry, and the likely challenges to be encountered along the way.

  1. Energy-harvesting potential of automobile suspension

    Science.gov (United States)

    Múčka, Peter

    2016-12-01

    This study is aimed quantify dissipated power in a damper of automobile suspension to predict energy harvesting potential of a passenger car more accurately. Field measurements of power dissipation in a regenerative damper are still rare. The novelty is in using the broad database of real road profiles, a 9 degrees-of-freedom full-car model with real parameters, and a tyre-enveloping contact model. Results were presented as a function of road surface type, velocity and road roughness characterised by International Roughness Index. Results were calculated for 1600 test sections of a total length about 253.5 km. Root mean square of a dissipated power was calculated from 19 to 46 W for all four suspension dampers and velocity 60 km/h and from 24 to 58 W for velocity 90 km/h. Results were compared for a full-car model with a tyre-enveloping road contact, full-car and quarter-car models with a tyre-road point contact. Mean difference among three models in calculated power was a few per cent.

  2. Quadruple suspension design for Advanced LIGO

    International Nuclear Information System (INIS)

    Robertson, N A; Cagnoli, G; Crooks, D R M; Elliffe, E; Faller, J E; Fritschel, P; Gossler, S; Grant, A; Heptonstall, A; Hough, J; Lueck, H; Mittleman, R; Perreur-Lloyd, M; Plissi, M V; Rowan, S; Shoemaker, D H; Sneddon, P H; Strain, K A; Torrie, C I; Ward, H; Willems, P

    2002-01-01

    In this paper, we describe the conceptual design for the suspension system for the test masses for Advanced LIGO, the planned upgrade to LIGO, the US laser interferometric gravitational-wave observatory. The design is based on the triple pendulum design developed for GEO 600 - the German/UK interferometric gravitational wave detector. The GEO design incorporates fused silica fibres of circular cross-section attached to the fused silica mirror (test mass) in the lowest pendulum stage, in order to minimize the thermal noise from the pendulum modes. The damping of the low-frequency modes of the triple pendulum is achieved by using co-located sensors and actuators at the highest mass of the triple pendulum. Another feature of the design is that global control forces acting on the mirrors, used to maintain the output of the interferometer on a dark fringe, are applied via a triple reaction pendulum, so that these forces can be implemented via a seismically isolated platform. These techniques have been extended to meet the more stringent noise levels planned for in Advanced LIGO. In particular, the Advanced LIGO baseline design requires a quadruple pendulum with a final stage consisting of a 40 kg sapphire mirror, suspended on fused silica ribbons or fibres. The design is chosen to aim to reach a target noise contribution from the suspension corresponding to a displacement sensitivity of 10 -19 m Hz -1/2 at 10 Hz at each of the test masses

  3. Standardisation of magnetic nanoparticles in liquid suspension

    International Nuclear Information System (INIS)

    Wells, James; Kazakova, Olga; Posth, Oliver; Steinhoff, Uwe; Petronis, Sarunas; Bogart, Lara K; Southern, Paul; Pankhurst, Quentin; Johansson, Christer

    2017-01-01

    Suspensions of magnetic nanoparticles offer diverse opportunities for technology innovation, spanning a large number of industry sectors from imaging and actuation based applications in biomedicine and biotechnology, through large-scale environmental remediation uses such as water purification, to engineering-based applications such as position-controlled lubricants and soaps. Continuous advances in their manufacture have produced an ever-growing range of products, each with their own unique properties. At the same time, the characterisation of magnetic nanoparticles is often complex, and expert knowledge is needed to correctly interpret the measurement data. In many cases, the stringent requirements of the end-user technologies dictate that magnetic nanoparticle products should be clearly defined, well characterised, consistent and safe; or to put it another way—standardised. The aims of this document are to outline the concepts and terminology necessary for discussion of magnetic nanoparticles, to examine the current state-of-the-art in characterisation methods necessary for the most prominent applications of magnetic nanoparticle suspensions, to suggest a possible structure for the future development of standardisation within the field, and to identify areas and topics which deserve to be the focus of future work items. We discuss potential roadmaps for the future standardisation of this developing industry, and the likely challenges to be encountered along the way. (topical review)

  4. Hydrodynamic dispersion of microswimmers in suspension

    Science.gov (United States)

    Martin, Matthieu; Rafaï, Salima; Peyla, Philippe

    2014-11-01

    In our laboratory, we study hydrodynamics of suspensions of micro-swimmers. These micro-organisms are unicellular algae Chlamydomonas Rheinhardii which are able to swim by using their flagella. The swimming dynamics of these micro-swimmers can be seen as a random walk, in absence of any kind of interaction. In addition, these algae have the property of being phototactic, i.e. they swim towards the light. Combining this property with a hydrodynamic flow, we were able to reversibly separate algae from the rest of the fluid. But for sufficiently high volume fraction, these active particles interact with each other. We are now interested in how the coupling of hydrodynamic interactions between swimmers and phototaxis can modify the swimming dynamics at the scale of the suspension. To this aim, we conduct experiments in microfluidic devices to study the dispersion of the micro-organisms in a the liquid phase as a function of the volume fraction. We show that the dispersion of an assembly of puller type microswimmers is quantitatively affected by hydrodynamics interactions. Phd student.

  5. Diagnóstico del uso de animales de tiro en una zona montañosa del norte del Cauca

    Directory of Open Access Journals (Sweden)

    Herrera Gutiérrez Oscar Alonso

    1995-12-01

    bueyes y de bueyeros, se concentra en más del 80% en la subzonas de Pescador y Mondomo; las subzonas más rentables fueron San Antonio y El Pital. Se debe capacitar a los yunteros en suplementación de las dietas y en el manejo sanitario de los bueyes, pues es difícil precisar en la zona un patrón de alimentación con respecto a los requerimientos energéticos.

  6. del alcoholismo

    Directory of Open Access Journals (Sweden)

    Rodrigo Arias Duque

    2005-01-01

    Full Text Available Desde el punto de vista farmacológico, es importante comprender qué es el alcohol y cómo actúa en el organismo. No existe una causa simple, sino una interacción complicada de factores neuroquímicos, fisiológicos, psicológicos y sociales que originan y desarrollan esta grave enfermedad fármaco-dependiente. La acción psicofisiológica y farmacodinámica del alcohol es fundamentalmente depresiva, por la reducción de la transmisión sináptica en el sistema nervioso humano. Es un hecho conocido que el consumo excesivo de alcohol causa una disfunción aguda y crónica del cerebro, produciendo trastornos en el sistema nervioso central, presentando alteraciones en la memoria y en las funciones intelectuales como cálculo, comprensión y aprendizaje. A nivel hepático tiene lugar, en su mayoría, el metabolismo del alcohol, produciéndose un hígado graso alcohólico, aumentando el tamaño, terminando en necrosis e inflamación grave del hígado; esto se llama hepatitis alcohólica, y si se sigue consumiendo alcohol se desarrollará la cirrosis. El alcohol también ha estado relacionado con alteraciones del miocardio; se ha constatado en animales de experimentación sanos que tanto la velocidad de contracción del músculo cardiaco y su máxima tensión disminuyen en presencia del alcohol, como consecuencia, la fuerza de cada contracción y el aumento de presión en el ventrículo izquierdo son menores, perdiendo eficacia el corazón como bomba.

  7. 17 CFR 32.11 - Suspension of commodity option transactions.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Suspension of commodity option... REGULATION OF COMMODITY OPTION TRANSACTIONS § 32.11 Suspension of commodity option transactions. (a... accept money, securities or property in connection with, the purchase or sale of any commodity option, or...

  8. 15 CFR 14.13 - Debarment and suspension.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Debarment and suspension. 14.13 Section 14.13 Commerce and Foreign Trade Office of the Secretary of Commerce UNIFORM ADMINISTRATIVE... shall comply with the nonprocurement debarment and suspension common rule implementing E.O.s 12549 and...

  9. 12 CFR 19.244 - Automatic removal, suspension, and debarment.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Automatic removal, suspension, and debarment. 19.244 Section 19.244 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY RULES... Services § 19.244 Automatic removal, suspension, and debarment. (a) An independent public accountant or...

  10. 12 CFR 19.243 - Removal, suspension, or debarment.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Removal, suspension, or debarment. 19.243 Section 19.243 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY RULES OF PRACTICE AND PROCEDURE Removal, Suspension, and Debarment of Accountants From Performing Audit Services § 19...

  11. The Evolution of Discipline: Alternative to Suspension Programs.

    Science.gov (United States)

    Streva, Michael A.

    Historically, the chosen method of discipline in United States schools has gone from corporal punishment to an emphasis on suspension. Recently, as principals have become less certain about the extent of their authority to suspend students, many inschool programs have been developed as alternatives to suspension. Among the advantages of such…

  12. In-School Suspension Practices and the Prison Hospital Experience

    Science.gov (United States)

    Wiles, David K.; Rockoff, Edward

    1977-01-01

    Explores the legal implications of in-school suspension practices through consideration of individual versus institutional rights within a special punitive-rehabilitative setting. Argues that the prison hospital model is applicable to in-school suspension programs and discusses a number of legal questions raised by the prison hospital model.…

  13. 12 CFR 513.4 - Suspension and debarment.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Suspension and debarment. 513.4 Section 513.4 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRACTICE BEFORE THE OFFICE § 513.4 Suspension and debarment. (a) The Office may censure any person practicing before it or may deny...

  14. Magnetic suspension of a rotating system. Application to inertial flywheels

    International Nuclear Information System (INIS)

    Lemarquand, Guy

    1984-01-01

    The various possible magnetic suspension configurations compatible with rotating mechanical systems are defined from studies of the characteristics of different types of magnetic bearings. The results obtained are used in the design and realization of a magnetic suspension for an inertial flywheel. (author) [fr

  15. 45 CFR 99.4 - Suspension of rules.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Suspension of rules. 99.4 Section 99.4 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROCEDURE FOR HEARINGS FOR THE CHILD CARE AND DEVELOPMENT FUND General § 99.4 Suspension of rules. With notice to all parties, the...

  16. 2 CFR 180.740 - Are suspension proceedings formal?

    Science.gov (United States)

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Are suspension proceedings formal? 180.740 Section 180.740 Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET GOVERNMENTWIDE GUIDANCE FOR GRANTS... suspension decision. (b) You as a respondent or your representative must submit any documentary evidence you...

  17. 78 FR 15402 - Xytos, Inc.; Order of Suspension of Trading

    Science.gov (United States)

    2013-03-11

    ... SECURITIES AND EXCHANGE COMMISSION [ File No. 500-1] Xytos, Inc.; Order of Suspension of Trading... financial conditions and business operations, and because of potentially manipulative conduct in the trading... investors require a suspension of trading in the securities of the above-listed company. Therefore, it is...

  18. 75 FR 68636 - 8000, Inc.; Order of Suspension of Trading

    Science.gov (United States)

    2010-11-08

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] 8000, Inc.; Order of Suspension of Trading... and the protection of investors require a suspension of trading in the securities of 8000, Inc. Therefore, it is ordered, pursuant to Section 12(k) of the Securities Exchange Act of 1934, that trading in...

  19. 77 FR 16113 - Asiamart, Inc., Order of Suspension of Trading

    Science.gov (United States)

    2012-03-19

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Asiamart, Inc., Order of Suspension of Trading... and the protection of investors require a suspension of trading in the securities of the above-listed... trading in the securities of the above-listed company is suspended for the period from 9:30 a.m. EDT on...

  20. 78 FR 44185 - RVPlus, Inc.; Order of Suspension of Trading

    Science.gov (United States)

    2013-07-23

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] RVPlus, Inc.; Order of Suspension of Trading... and the protection of investors require a suspension of trading in the securities of the above-listed... trading in the securities of the above-listed company is suspended for the period from 9:30 a.m. EDT, on...

  1. 15 CFR 2011.110 - Suspension of certificate system.

    Science.gov (United States)

    2010-01-01

    ..., SYRUPS AND MOLASSES Certificate of Quota Eligibility § 2011.110 Suspension of certificate system. (a... of such suspension and the effective date thereof shall be published in the Federal Register. (b... such reinstatement and the effective date thereof shall be published in the Federal Register. (c...

  2. 19 CFR 210.23 - Suspension of investigation.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Suspension of investigation. 210.23 Section 210.23 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE ADJUDICATION AND ENFORCEMENT Motions § 210.23 Suspension of investigation. Any party may move to...

  3. 3 CFR - Suspension of Limitations Under the Jerusalem Embassy Act

    Science.gov (United States)

    2010-01-01

    ... 3 The President 1 2010-01-01 2010-01-01 false Suspension of Limitations Under the Jerusalem... June 5, 2009 Suspension of Limitations Under the Jerusalem Embassy Act Memorandum for the Secretary of... States, including section 7(a) of the Jerusalem Embassy Act of 1995 (Public Law 104-45) (the “Act”), I...

  4. Non-homogeneous flow profiles in sheared bacterial suspensions

    Science.gov (United States)

    Samanta, Devranjan; Cheng, Xiang

    Bacterial suspensions under shear exhibit interesting rheological behaviors including the remarkable ``superfluidic'' state with vanishing viscosity at low shear rates. Theoretical studies have shown that such ``superfluidic'' state is linked with non-homogeneous shear flows, which are induced by coupling between nematic order of active fluids and hydrodynamics of shear flows. However, although bulk rheology of bacterial suspensions has been experimentally studied, shear profiles within bacterial suspensions have not been explored so far. Here, we experimentally investigate the flow behaviors of E. coli suspensions under planar oscillatory shear. Using confocal microscopy and PIV, we measure velocity profiles across gap between two shear plates. We find that with increasing shear rates, high-concentration bacterial suspensions exhibit an array of non-homogeneous flow behaviors like yield-stress flows and shear banding. We show that these non-homogeneous flows are due to collective motion of bacterial suspensions. The phase diagram of sheared bacterial suspensions is systematically mapped as functions of shear rates an bacterial concentrations. Our experiments provide new insights into rheology of bacterial suspensions and shed light on shear induced dynamics of active fluids. Chemical Engineering and Material Science department.

  5. Both Suspension and Alternatives Work, Depending on One's Aim

    Science.gov (United States)

    Bear, George G.

    2012-01-01

    In this commentary on the special series, I argue that whereas a zero-tolerance approach to school discipline is "something stupid" (Kauffman & Brigham, 2000) the use of suspension might not be. Despite its limitations, suspension and other forms of punishment serve as effective deterrents of behavior problems for most children, especially when…

  6. Network synthesis and parameter optimization for vehicle suspension with inerter

    Directory of Open Access Journals (Sweden)

    Long Chen

    2016-12-01

    Full Text Available In order to design a comfortable-oriented vehicle suspension structure, the network synthesis method was utilized to transfer the problem into solving a timing robust control problem and determine the structure of “inerter–spring–damper” suspension. Bilinear Matrix Inequality was utilized to obtain the timing transfer function. Then, the transfer function of suspension system can be physically implemented by passive elements such as spring, damper, and inerter. By analyzing the sensitivity and quantum genetic algorithm, the optimized parameters of inerter–spring–damper suspension were determined. A quarter-car model was established. The performance of the inerter–spring–damper suspension was verified under random input. The simulation results manifested that the dynamic performance of the proposed suspension was enhanced in contrast with traditional suspension. The root mean square of vehicle body acceleration decreases by 18.9%. The inerter–spring–damper suspension can inhibit the vertical vibration within the frequency of 1–3 Hz effectively and enhance the performance of ride comfort significantly.

  7. Tuning a Le Mans Car Suspension in ADAMS

    CSIR Research Space (South Africa)

    Berman, R

    2012-09-01

    Full Text Available An ADAMS model of South Africa’s first ever Le Mans car was developed and used to tune the suspension parameters. Validation of the model is to be done by comparing simulation results to those obtained in track testing. The suspension parameters...

  8. 26 CFR 301.6503(g)-1 - Suspension pending correction.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Suspension pending correction. 301.6503(g)-1 Section 301.6503(g)-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED... Collection § 301.6503(g)-1 Suspension pending correction. The running of the periods of limitations provided...

  9. 21 CFR 1314.155 - Suspension pending final order.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Suspension pending final order. 1314.155 Section 1314.155 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE RETAIL SALE OF SCHEDULED LISTED CHEMICAL PRODUCTS Order to Show Cause § 1314.155 Suspension pending final order. (a) The...

  10. 21 CFR 520.1182 - Iron dextran suspension.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Iron dextran suspension. 520.1182 Section 520.1182... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.1182 Iron dextran suspension... hydroxide in complex with a low molecular weight dextran. (b) Sponsor. See No. 051311 in § 510.600(c) of...

  11. Degradability of aged aquatic suspensions of C60 nanoparticles

    DEFF Research Database (Denmark)

    Hartmann, Nanna Isabella Bloch; Buendia, Inmaculada M.; Bak, Jimmy

    2011-01-01

    In this study, aged aqueous suspensions of C(60) (nC(60)) were investigated in the respirometric OECD test for ready biodegradability. Two suspensions of nC(60) were prepared by stirring and aged under indirect exposure to sunlight for 36 months. ATR-FTIR analyses confirmed the presence of C(60)-...

  12. Radiation resistivity of frozen insulin solutions and suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Soboleva, N N; Ivanova, A I; Talrose, V L; Trofimov, V I; Fedotov, V P [AN SSSR, Moscow. Inst. Fizicheskoj Khimii; Research Institute for Biological Testing of Chemicals, Moscow (USSR); Institute of Experimental Endocrinology and Hormon Chemistry, Moscow (USSR))

    1981-10-01

    The effect of great increase in radiation resistance of insulin solutions and suspensions after irradiation at low temperatures in the frozen state was observed by absorption spectrophotometry, paper chromatography and biological analysis. The data obtained suggest irradiation of frozen insulin solutions and suspensions as a method for its sterilization.

  13. 38 CFR 21.3043 - Suspension of program; child.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Suspension of program; child. 21.3043 Section 21.3043 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS... 38 U.S.C. Chapter 35 Eligibility and Entitlement § 21.3043 Suspension of program; child. For an...

  14. Research on Dynamic Optimization for Road-friendly Vehicle Suspension

    Directory of Open Access Journals (Sweden)

    Lu Yongjie

    2014-10-01

    Full Text Available The heavy vehicle brings large dynamic loads to the road surface, which would reduce vehicle ride comfort and shorten road service life. The structure characteristic of heavy vehicle suspension has a significant impact on vehicle performance. Based on the D'Alembert principle, the dynamics models of independent and integral balanced suspension are proposed considering mass and inertia of balancing rod. The sprung mass acceleration and the tire dynamic force for two kinds of balanced suspension and the traditional quarter vehicle model are compared in frequency-domain and time-domain respectively. It is concluded that a quarter vehicle model simplified for balanced suspension could be used to evaluate the ride comfort of vehicle well, but it has some limitations in assessing the vehicle road-friendliness. Then, the sprung mass acceleration and the road damage coefficients are also analyzed under different vehicle design and running parameters at detail. Some conclusions are obtained: low suspension stiffness, high suspension damping and low tire stiffness are all favorable to improve vehicle performance; there is a saturation range of suspension damping enhancing vehicle performance; improving the road surface roughness and avoiding the no-load running are two effective methods to accomplish the better ride comfort and road-friendliness. The suspension stiffness and damping parameters are chosen for optimal parameters matching of road friendliness based on the approximation optimization method.

  15. Factores laborales y extralaborales de floricultores con Síndrome del Túnel del Carpo: cundinamarca-Colombia 2013

    Directory of Open Access Journals (Sweden)

    Alfonso Hernández D. Wilder

    Full Text Available Objetivo: realizar un estudio descriptivo, de corte transversal y alcance correlacional sobre condiciones laborales y extralaborales de trabajadores con diagnóstico de Síndrome del Túnel del Carpo que laboran en cultivos de flores en la región de Cundinamarca (Colombia. Método: Se hizo un muestreo por conveniencia y a disponibilidad en tres empresas de cultivo de flores afiliadas a la Asociación Colombiana de Exportadores de Flores (ASOCOLFLORES. Se analizaron características sociodemográficas, antecedentes ocupacionales y actividades extraocupacionales. Se realizó la evaluación de puestos de trabajo mediante la utilización del método OCRA. Resultados: el total de los casos diagnosticados afecta a mujeres que realizan actividades laborales con alta demanda de movimientos repetitivos, agarres con requerimientos de fuerza, posturas forzadas de miembros superiores por periodos prolongados y alta exigencia en el ritmo de trabajo. Se identificaron actividades extralaborales con jornadas prolongadas dedicadas a la realización de labores domésticas que evidencian una correlación estadísticamente significativa con factores de riesgo presentes en las condiciones de trabajo (RHO de Spearman. Discusión: los hallazgos pueden estar relacionados con la denominada situación de segregación laboral y la prolongada exposición a factores de riesgo presentes en las condiciones de trabajo y los que se derivan de las actividades domésticas que deben desarrollar las mujeres.

  16. Vaginal vault suspension during hysterectomy for benign indications

    DEFF Research Database (Denmark)

    Bonde, Lisbeth; Noer, Mette Calundann; Møller, Lars Alling

    2017-01-01

    Introduction and hypothesis: Several suspension methods are used to try to prevent pelvic organ prolapse (POP) after hysterectomy. We aimed to evaluate agreement on terminology and surgical procedure of these methods. Methods: We randomly chose 532 medical records of women with a history......: Regarding medical records, agreement on terminology was good among patients undergoing pooled suspension in cases of hysterectomy via the abdominal and vaginal route (agreement 78.7, 92.3%). Regarding videos, agreement on surgical procedure was good among pooled suspension patients in cases of hysterectomy...... via the abdominal, laparoscopic, and vaginal routes (agreement 88.9, 97.8, 100%). Agreement on individual suspension methods differed regarding both medical records (agreement 0–90.1%) and videos (agreement 0–100%). Conclusions: Agreement on terminology and surgical procedure regarding suspension...

  17. Preparation of conjugated polymer suspensions by using ultrasonic atomizer

    Energy Technology Data Exchange (ETDEWEB)

    Tada, Kazuya, E-mail: tada@eng.u-hyogo.ac.jp; Onoda, Mitsuyoshi

    2010-11-30

    The electrophoretic deposition is a method useful to prepare conjugated polymer films for electronic devices. This method provides high material recovery rate on the substrate from the suspension, in contrast to the conventional spin-coating in which most of the material placed on the substrate is blown away. Although manual reprecipitation technique successfully yields suspensions of various conjugated polymers including polyfluorene derivatives, it is favorable to control the preparation process of suspensions. In this context, this paper reports preliminary results on the preparation of suspension of conjugated polymer by using an ultrasonic atomizer. While the resultant films do not show particular difference due to the preparation methods of the suspension, the electric current profiles during the electrophoretic deposition suggests that the ultrasonic atomization of polymer solution prior to be mixed with poor solvent results in smaller and less uniform colloidal particles than the conventional manual pouring method.

  18. The analysis of silica suspensions atomization

    Energy Technology Data Exchange (ETDEWEB)

    Ochowiak, M., E-mail: Marek.Ochowiak@put.poznan.pl [Poznan University of Technology, Faculty of Chemical Technology, Department of Chemical Engineering and Equipment, Poznan (Poland); Broniarz-Press, L.; Woziwodzki, S. [Poznan University of Technology, Faculty of Chemical Technology, Department of Chemical Engineering and Equipment, Poznan (Poland)

    2011-12-15

    Highlights: Black-Right-Pointing-Pointer The correlation equation for discharge coefficient has been proposed. Black-Right-Pointing-Pointer The spray angle increases with increase in GLR until a maximum value is attained at GLR value of 0.07. Black-Right-Pointing-Pointer The equation for SMD has been proposed. Black-Right-Pointing-Pointer The C{sub D} and SMD are decreasing rapidly as GLR is increased to around 0.07 and thereafter decreasing at a slower rate. - Abstract: The paper contains the results of experimental investigation of air-water and air-silica suspension atomization process in effervescent nozzles with internal mixing obtained by the use of the digital microphotography method. In experiments the different aqueous solutions of silica Aerosil 300 of different concentration have been used. The suspensions containing up to 0.04 (kg solid particles/kg solution) have Newtonian rheological properties. The observations were carried out at liquid flow rates changed from 0.0014 to 0.011 (kg/s) and gas flow rates from 0.00015 to 0.0065 (kg/s). It corresponded to gas to liquid mass ratios (GLR) values from 0.014 to 0.46. The analysis of photos shows that the droplets which have been formed during the liquid atomization have very different sizes. The differences between characteristics of effervescent atomization for water and suspensions used have not been observed. The present study confirmed the previous reports which suggested that the small particles added to solution do not change spray characteristics. The experimental results show that C{sub D} and SMD are non-linear functions of GLR. Their values are decreasing rapidly as GLR is increased from zero to around 0.07 and thereafter decreasing at a slower rate with further increase in GLR. In the same point (GLR = 0.07) the value of {alpha} is maximal. The first regime is characteristic for bubbly flow. The second is typical of annular flow regime. Boundary between bubbly and annular flow regime is observed

  19. Adaptive magnetorheological seat suspension for shock mitigation

    Science.gov (United States)

    Singh, Harinder Jit

    This research focuses on theoretical and experimental analysis of an adaptive seat suspension employing magnetorheological energy absorber with the objective of minimizing injury potential to seated occupant of different weights subjected to broader crash intensities. The research was segmented into three tasks: (1) development of magnetorheological energy absorber, (2) biodynamic modeling of a seated occupant, and (3) control schemes for shock mitigation. A linear stroking semi-active magnetorheological energy absorber (MREA) was designed, fabricated and tested for intense impact conditions with piston velocities up to 8 m/s. MREA design was optimized on the basis of Bingham-plastic model (BPM model) in order to maximize the energy absorption capabilities at high impact velocities. Computational fluid dynamics and magnetic FE analysis were conducted to validate MREA performance. Subsequently, low-speed cyclic testing (0-2 Hz subjected to 0-5.5 A) and high-speed drop testing (0-4.5 m/s at 0 A) were conducted for quantitative comparison with the numerical simulations. Later, a nonlinear four degrees-of-freedom biodynamic model representing a seated 50th percentile male occupant was developed on the basis of experiments conducted on Hybrid II 50th percentile male anthropomorphic test device. The response of proposed biodynamic model was compared quantitatively against two different biodynamic models from the literature that are heavily implemented for obtaining biodynamic response under impact conditions. The proposed biodynamic model accurately predicts peak magnitude, overall shape and the duration of the biodynamic transient response, with minimal phase shift. The biodynamic model was further validated against 16 impact tests conducted on horizontal accelerator facility at NAVAIR for two different shock intensities. Compliance effects of human body were also investigated on the performance of adaptive seat suspension by comparing the proposed biodynamic model

  20. ESTADO DEL ARTE DE SMART GRID: PARTE I

    Directory of Open Access Journals (Sweden)

    Yozel Andrés Montoya Mendoza

    2016-03-01

    Full Text Available Para la concepción de un efectivo plan de ahorro energético o eficiencia energética es necesario tomar en cuenta, entre otros aspectos, las nuevas técnicas y tecnologías surgidas en los últimos años para la optimización de la operación de las redes eléctricas, tal es el caso de Smart Grid o redes inteligentes eléctricas inteligentes. Smart Grid es un concepto relativamente reciente, de no más de dos décadas atrás, que visualiza a la red eléctrica como un sistema distribuido en el que las acciones de todos los actores de la red se integran de manera inteligente, con el objetivo de garantizar un suministro del servicio eléctrico que sea eficiente, sustentable, económico y seguro. En ese sentido, en este artículo se hace una primera revisión de Smart Grid, en términos de su concepto, requerimientos, características y beneficios más importantes. También son estudiados los subsistemas funcionales de Smart Grid, así como los aspectos más resaltantes a ser tomados en cuenta en términos de sistemas de telecomunicaciones para dicha tecnología.

  1. Development of the Nissan hydraulic active suspension. Nissan yuatsu active suspension no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kawarasaki, y.; Fukunaga, Y.; Hasegawa, S.; Okuyama, Y.; Omura, I.; Takahashi, K.; Abe, S.; Tsuruta, E. (Nissan Motor Co. Ltd., Tokyo (Japan))

    1989-12-25

    A hydraulic active suspension system, Nissan original product, was developed and mass produced for the first time in the world. The system incorporates a sufficient power source, a high accuracy sensor and a high response device for continuous and intended vehicle control and at the same time delivers high levels of ride comfort and driving performance. The suspension system has four innovative features: skyhook damping, active roll and pitching control, a frequency-dependent damping mechanism, and active steering characteristics control. Under all road and operating conditions, the system actively suppresses vehicle attitude changes and unnecessary movement, and also gently absorbs inputs from the road. This epoch-making system provides a dramatic improvement in vehicle performance, and has been adopted in the Infiniti Q45 luxury sedan. 2 refs., 20 figs., 4 tabs.

  2. Defect Proliferation in Active Nematic Suspensions

    Science.gov (United States)

    Mishra, Prashant; Bowick, Mark J.; Giomi, Luca; Marchetti, M. Cristina

    2014-03-01

    The rich structure of equilibrium nematic suspensions, with their characteristic disclination defects, is modified when active forces come into play. The uniform nematic state is known to be unstable to splay (extensile) or bend (contractile) deformations above a critical activity. At even higher activity the flow becomes oscillatory and eventually turbulent. Using hydrodynamics, we classify the active flow regimes as functions of activity and order parameter friction for both contractile and extensile systems. The turbulent regime is marked by a non-zero steady state density of mobile defect pairs. The defect density itself scales with an ``active Ericksen number,'' defined as the ratio of the rate at which activity is injected into the system to the relaxation rate of orientational deformations. The work at Syracuse University was supported by the NSF on grant DMR-1004789 and by the Syracuse Soft Matter Program.

  3. Flight suspension for the relativity gyro

    International Nuclear Information System (INIS)

    Patten, R.A. van

    1983-01-01

    A suspension system for levitation and precision positioning of the niobium coated spherical quartz gyro rotor during orbital flight has been simulated. The system employs multiple controllers and estimators with microprocessor (Z80) controlled range switching. The resulting system handles external accelerations up to 1 g in the highest range yet in the lowest range, below 10 -6 g the sensor noise power spectral density produces only 10 -10 g rms in the rotor. The system is capable of automatic emergency switch up within 100 μsec. Switch down is automatic to expected flight levels of ± 5 x 10 -8 g. Positioning accuracy in all ranges including emergency switch up is ± 5 μin. static, and ± 50 μin. dynamic. The average acceleration during the mission should be 10 -10 g to attain the science data accuracy goal. (Auth.)

  4. Mirror suspension system for the TAMA SAS

    CERN Document Server

    Takamori, A; Bertolini, A; Cella, G; DeSalvo, R; Fukushima, M; Iida, Y; Jacquier, F; Kawamura, S; Marka, S; Nishi, Y; Numata, K; Sannibale, V; Somiya, K; Takahashi, R; Tariq, H; Tsubono, K; Ugas, J; Viboud, N; Yamamoto, H; Yoda, T; Wang Chen Yang

    2002-01-01

    Several R and D programmes are ongoing to develop the next generation of interferometric gravitational wave detectors providing the superior sensitivity desired for refined astronomical observations. In order to obtain a wide observation band at low frequencies, the optics need to be isolated from the seismic noise. The TAMA SAS (seismic attenuation system) has been developed within an international collaboration between TAMA, LIGO, and some European institutes, with the main objective of achieving sufficient low-frequency seismic attenuation (-180 dB at 10 HZ). The system suppresses seismic noise well below the other noise levels starting at very low frequencies above 10 Hz. It also includes an active inertial damping system to decrease the residual motion of the optics enough to allow a stable operation of the interferometer. The TAMA SAS also comprises a sophisticated mirror suspension subsystem (SUS). The SUS provides support for the optics and vibration isolation complementing the SAS performance. The SU...

  5. Aeroelastic Stability of Suspension Bridges using CFD

    DEFF Research Database (Denmark)

    Stærdahl, Jesper Winther; Sørensen, Niels; Nielsen, Søren R.K.

    2007-01-01

    using CFD models and the aeroelastic stability boundary has been successfully determined when comparing two-dimensional flow situations using wind tunnel test data and CFD methods for the flow solution and two-degrees-of-freedom structural models in translation perpendicular to the flow direction......In recent years large span suspension bridges with very thin and slender profiles have been built without proportional increasing torsional and bending stiffness. As a consequence large deformations at the mid-span can occur with risk of aeroelastic instability and structural failure. Analysis...... of aeroelastic stability also named flutter stability is mostly based on semi-empirical engineering models, where model specific parameters, the so-called flutter derivatives, need calibration from wind tunnel tests or numerical methods. Several papers have been written about calibration of flutter derivatives...

  6. Consenso sobre la atención sanitaria del tabaquismo en España

    Directory of Open Access Journals (Sweden)

    Francisco Camarelles Guillem

    2009-01-01

    Full Text Available Tras la aprobación de la Ley 28/2005, de medidas sanitarias frente al tabaquismo y reguladora de la venta, el suministro, el consumo y la publicidad de los productos del tabaco, se están produciendo diversos desarrollos y progresos en el campo del tratamiento del tabaquismo en todas las Comunidades Autónomas. Por este motivo y por los propios requerimientos de la Ley, tanto las administraciones públicas como las sociedades científicas integradas en el Comité Nacional de Prevención del Tabaquismo CNPT, han considerado que nuestro país se halla en una posición óptima para revisar los avances conseguidos hasta el momento y señalar las bases de carácter técnico que, de acuerdo a la evidencia y los recursos disponibles, sería conveniente que pudieran orientar las actuaciones de asistencia a las personas que fuman en el Marco del Sistema Nacional de Salud. La finalidad de este documento, de carácter exclusivamente técnico y científico, ha sido consensuar una propuesta básica de calidad sobre asistencia en tabaquismo que sirva como guía orientativa en nuestro país. Los objetivos de este documento son analizar las necesidades a las que responde una estrategia asistencial en tabaquismo, revisar la eficacia de las opciones asistenciales existentes en tabaquismo, sintetizar la evidencia disponible sobre el impacto de las políticas asistenciales en la disminución del porcentaje de personas fumadoras y señalar las necesidades existentes en este sector. El documento señala los mínimos básicos para orientar las actuaciones asistenciales de calidad en España, teniendo en cuenta criterios de riesgo sanitario, accesibilidad, eficiencia, sostenibilidad y equidad.

  7. Assessment of drug salt release from solutions, suspensions and in situ suspensions using a rotating dialysis cell

    DEFF Research Database (Denmark)

    Parshad, Henrik; Frydenvang, Karla; Liljefors, Tommy

    2003-01-01

    buffer is used as release media. Generally, the initial release of the drug salt from in situ suspensions occurred faster as compared to conventional suspensions, probably due to incomplete precipitation of the drug salt, and hence formation of supersaturated solutions where the rate of release......A rotating dialysis cell consisting of a small (10 ml) and a large compartment (1000 ml) was used to study the release of drug salt (bupivacaine 9-anthracene carboxylate) from (i). solutions, (ii). suspensions and (iii). in situ formed suspensions. Initial release experiments from suspensions...... indicated that the release of drug salt in deionized water was predominantly limited by the diffusion across the membrane whereas it is essentially dissolution rate controlled in 0.05 M phosphate buffer (pH 7.40). Thus, the in vitro model appears to have a potential in formulation screening when phosphate...

  8. La comunicación y la información en Gobiernos locales: persistencia de prácticas difusionistas de comunicación en organizaciones gubernamentales del Valle del Cauca (Colombia

    Directory of Open Access Journals (Sweden)

    Ana María López

    2016-01-01

    Full Text Available Este artículo presenta resultados de una investigación sobre el ejercicio comunicativo dentro de diez alcaldías del Valle de Cauca a través de una metodología de diagnóstico centrada en la aplicación del Modelo de Comunicación Pública, Organizacional e Informativa para Entidades del Estado que considera elementos del Modelo Estándar de Control Interno. Se asume la comunicación pública como aquella que se da en el escenario de lo público y que desde el ámbito gubernamental propicia acceso, interlocución, visibilidad, participación y deliberación de la ciudadanía en pro de generar confianza en el Estado. Se encuentra que, aunque en estas entidades persisten prácticas difusionistas de comunicación, también se ha cambiado su percepción y requerimiento. Esto se percibe en la diferenciación que los funcionarios públicos hacen entre comunicación e información, quienes conciben la primera como una necesidad interna para mejorar el ambiente laboral; y la segunda, como requisito indispensable para relacionarse con los ciudadanos.

  9. Una red de sensores inalámbricos para la automatización y control del riego localizado

    Directory of Open Access Journals (Sweden)

    Nesly Diana Castro

    2016-12-01

    Full Text Available Uno de los objetivos de la agricultura de precisión, es el riego de acuerdo con las necesidades particulares de cada porción del suelo de cultivo. En este trabajo, se describe el diseño e implementación de una red de sensores inalámbricos que es capaz de obtener mediciones de humedad del suelo de diferentes zonas de un cultivo de fresas y, según los datos recogidos, determina el tiempo de riego y la zona particular que se debe regar utilizando el método de goteo. Los requerimientos de agua para los cultivos se estimaron teniendo en cuenta la capacidad de campo y el umbral de riego; ambas fueron encontradas para cada zona del cultivo en periodo de producción. La comunicación entre los nodos de la red se basa en la pila de protocolos ZigBee, y el prototipo final es un sistema de control de riego de encendido/apagado en lazo cerrado, que incluye una banda de histéresis. Los resultados de la implementación de la red y el sistema de control muestran un incremento en la eficiencia del uso de agua, además de una mejora en la calidad de los frutos con respecto al método de riego tradicional.

  10. Culturas del Mundo

    DEFF Research Database (Denmark)

    Benwell, Ann Fenger; Costa, Alberto; Waehle, Espen

    2006-01-01

    ’Culturas del mundo. Colecciones del Museo Nacional de Dinamarca’ with Ann Fenger Benwell in Culturas del Mundo. Colecciones del Museo Nacional de Dinamarca, ed. Silvia Sauquet, Fundación "la Caixa", Barcelona 2006, pp. 31-39......’Culturas del mundo. Colecciones del Museo Nacional de Dinamarca’ with Ann Fenger Benwell in Culturas del Mundo. Colecciones del Museo Nacional de Dinamarca, ed. Silvia Sauquet, Fundación "la Caixa", Barcelona 2006, pp. 31-39...

  11. Suspense, culpa y cintas de vídeo. Caché/Escondido de Michael Haneke

    Directory of Open Access Journals (Sweden)

    Miguel Martínez-Cabeza

    2011-12-01

    Full Text Available Caché/Escondido (2005 representa dentro de la filmografía de Michael Haneke el ejemplo más destacado de síntesis de los planteamientos formales e ideológicos del cineasta austriaco. Este artículo analiza el filme como manifiesto cinematográfico y como explotación de las convenciones genéricas para construir un modelo de espectador reflexivo. La investigación del modo en que el director plantea y abandona las técnicas del suspense aporta claves para explicar el éxito casi unánime de crítica y la respuesta mucho menos homogénea de las audiencias. El desencadenante de la trama, unas cintas de vídeo que reciben los Laurent, es alusión directa a Carretera Perdida (1997 de David Lynch; no obstante, el misterio acerca del autor de la videovigilancia pierde interés en relación al sentimiento de culpa que desencadena en el protagonista. El episodio infantil de celos y venganza hacia un niño argelino y la actitud del Georges adulto representan una alegoría de la relación de Francia con su pasado colonial que tampoco cierra la narración de Haneke. Es precisamente la apertura formal con que el filme (desestructura cuestiones actuales como el límite entre la responsabilidad individual y colectiva lo que conforma un espectador tan distanciado de la diégesis como consciente de su propio papel de observador.

  12. LAS ORGANIZACIONES DE LA ECONOMÍA SOCIAL EN LA REFORMA DEL ESTADO EN VENEZUELA: CASO DEL ESTADO ZULIA 1989-2000

    Directory of Open Access Journals (Sweden)

    Gabriela Moran Leal

    2002-01-01

    Full Text Available A finales de la década de los 70 empieza a manifestarse en Venezuela la crisis del modelo de desarrollo, consistente en una grave situación económica, un gran déficit fiscal, problemas de gobernabilidad, así como elementos de fragmentación social, agudizados en la década de los 90 por los programas de estabilización económica. Por ello, desde 1984 se inicia el proceso de reforma del Estado, cuyos factores predominantes han sido la modernización política, la descentralización, la disminución del Estado social y los requerimientos de una mayor participación de la sociedad civil. Dentro del proceso de descentralización, iniciado en 1989, las gobernaciones promueven políticas de apoyo a las organizaciones de la economía social. El presente trabajo pretende caracterizar la política de la gobernación del estado Zulia dirigida a ese sector durante el periodo 1989-2000, a partir del enfoque de las políticas públicas, con una perspectiva crítico-descriptiva del proceso, por tratarse de una primera aproximación al objeto de estudio. Se construye un enfoque operativo sobre la definición de la economía social, su papel y su significación en los procesos de formulación económica y redefinición del Estado. Se avanza en la caracterización de las organizaciones estudiadas (microempresas, cooperativas y organizaciones no gubernamentales (ONGs, para luego puntualizar las estrategias políticas de los gobiernos. Se concluye, de manera parcial, en la descripción del proceso de formulación de políticas, donde ha predominado la visión utilitaria del sector, sin trascender los procesos organizativos reales que impulsen de manera significativa a estas organizaciones, para que impacten en la economía regional y nacional.

  13. Mecanismo de inserción del Laboratorio Tecnológico del Uruguay en el Parque Tecnológico Industrial del Cerro

    Directory of Open Access Journals (Sweden)

    Laura Márquez

    2011-05-01

    Full Text Available El Laboratorio Tecnológico del Uruguay, LATU, teniendo en cuenta su misión: "Impulsar el desarrollo sustentable del país y su inserción internacional a través de la innovación y transferencia de soluciones de valor, en servicios analíticos, metrológicos, tecnológicos, de gestión y evaluación de la conformidad de a cuerdo a la normativa aplicable", está trabajando en el apoyo a las micro, pequeñas y medianas empresas del país. Como estrategia para contribuir al logro de la misión, se ha iniciado una política de descentralización, eligiendo zonas de actividad con requerimientos similares, en cuanto a las necesidades de mejora de la competitividad de las empresas. En la zona de Montevideo llamada el Cerro, el gobierno municipal gestiona un Parque Tecnológico Industrial, PTIC, apoyando y alojando en su predio, 58 empresas. Este Parque se puede ver como un conglomerado de empresas, en una misma zona, con necesidades similares. El mecanismo de inserción del LATU en el PTIC, ha contado con una herramienta fundamental que es la instalación de una oficina en el propio Parque, cuyo objetivo principal es facilitar y asegurar la contribución del LATU al desarrollo y competitividad de las mipymes allí agrupadas.AbstractAttending to the Technological Laboratory of Uruguay (LATU's mission, to promote the sustainable development of the country and its international insertion through innovation and transfer of valuable solutions, it is working on support for micro, small and medium companies. As a management strategy to achieve the mission, a policy of decentralization, approaching to the enterprises, it's being implemented. In this context, it has been developed a methodology for insertion in the Industrial Technological Park of Cerro, PTIC. This park, which is managed by the municipal government, agglomerates a group of companies, in the same area with similar needs. The LATU's mechanism of insertion in the PTIC, has counted on with a

  14. Study on Dynamic Behaviour of Wishbone Suspension System

    International Nuclear Information System (INIS)

    Kamal, M; Rahman, M M

    2012-01-01

    This paper presents the characteristic model of the wishbone suspension system using the quarter car model approach. Suspension system in an automobile provides vehicle control and passenger comfort by providing isolation from road disturbances. This makes it essential that the detailed behavior of suspension should be known to optimize the performance. A kinetic study is performed using multi body system (MBS) analysis. The dirt road profile is considered as an applied loading. The spring constant, damping coefficient and sprung mass are studied on the performance of the suspension system. It can be observed that the spring constant is inversely related with time required to return to initial position and the amount of deformations. The damping ratio affects the suppression of spring oscillations, beyond a certain limit damping ration has the negligible effect. Sprung mass effected the equilibrium position of the suspension system with a small effect on its oscillation behavior. It is shown that the spring constant, damping ratio and sprung mass are significant parameters to design the suspension system. This study is essential for complete understanding of working of the suspension system and a future study with real geometries.

  15. Micrositios del pasto navajita (Bouteloua gracilis en comunidades de pastizal y de matorral del Altiplano Mexicano

    Directory of Open Access Journals (Sweden)

    Rosalva García-Sánchez

    2005-01-01

    Full Text Available El objetivo de este trabajo fue determinar si hay un tipo de micrositio específico para el establecimiento de Bouteloua gracilis, con patrones recurrentes, en dos diferentes tipos de comunidades vegetales. El pasto navajita azul es una especie perenne de alto valor forrajero y resistente a la sequía. Para ello se realizó un recorrido por tres matorrales y tres pastizales del Altiplano Mexicano; los sitios estudiados fueron elegidos con base en los reportes de ejemplares colectados y herborizados. Los resultados muestran, por un lado, que en los pastizales se presentan micrositios más de tipo funcional que físico, que determinan el establecimiento de B. gracilis, debido principalmente a los altos requerimientos de humedad edáfica de las semillas para germinar y desarrollarse. El micrositio más frecuente que determina el reclutamiento de los individuos provenientes de semilla es el suelo cercano a individuos adultos de su propia especie. Por otro lado, en los matorrales se detectaron, de manera recurrente, varias condiciones de micrositio para la especie y se observó que el tipo de micrositio es determinante, tanto para el establecimiento como para el crecimiento de este y otros pastos; también, el estudio mostró que en comunidades de matorral existe una mayor diversidad de micrositios que en los pastizales, por lo que se concluye que los individuos de B. gracilis, en los matorrales, crecen asociados a micrositios específicos que le brindan protección contra la desecación.

  16. Bidisperse and polydisperse suspension rheology at large solid fraction

    Energy Technology Data Exchange (ETDEWEB)

    Pednekar, Sidhant [Benjamin Levich Institute and Department of Chemical Engineering, The City College of New York, New York, New York 10031; Chun, Jaehun [Pacific Northwest National Laboratory, Richland, Washington 99352; Morris, Jeffrey F. [Benjamin Levich Institute and Department of Chemical Engineering, The City College of New York, New York, New York 10031

    2018-03-01

    At the same solid volume fraction, bidisperse and polydisperse suspensions display lower viscosities, and weaker normal stress response, compared to monodisperse suspensions. The reduction of viscosity associated with size distribution can be explained by an increase of the maximum flowable, or jamming, solid fraction. In this work, concentrated or "dense" suspensions are simulated under strong shearing, where thermal motion and repulsive forces are negligible, but we allow for particle contact with a mild frictional interaction with interparticle friction coefficient of 0.2. Aspects of bidisperse suspension rheology are first revisited to establish that the approach reproduces established trends; the study of bidisperse suspensions at size ratios of large to small particle radii (2 to 4) shows that a minimum in the viscosity occurs for zeta slightly above 0.5, where zeta=phi_{large}/phi is the fraction of the total solid volume occupied by the large particles. The simple shear flows of polydisperse suspensions with truncated normal and log normal size distributions, and bidisperse suspensions which are statistically equivalent with these polydisperse cases up to third moment of the size distribution, are simulated and the rheologies are extracted. Prior work shows that such distributions with equivalent low-order moments have similar phi_{m}, and the rheological behaviors of normal, log normal and bidisperse cases are shown to be in close agreement for a wide range of standard deviation in particle size, with standard correlations which are functionally dependent on phi/phi_{m} providing excellent agreement with the rheology found in simulation. The close agreement of both viscosity and normal stress response between bi- and polydisperse suspensions demonstrates the controlling in influence of the maximum packing fraction in noncolloidal suspensions. Microstructural investigations and the stress distribution according to particle size are also presented.

  17. Reporte de caso: restauración del sector anterior con prótesis parcial fija en cerámica de fluorapatita

    Directory of Open Access Journals (Sweden)

    Janeth Mercedes Rojas Murillo

    2013-01-01

    Full Text Available La necesidad de restauración del sector anterior, no solo por estética sino para mejorar la función y autoestima del paciente, lleva a pensar en satisfacer estos requerimientos teniendo en cuenta los inconvenientes que dependen del estado inicial, involucrando los tejidos duros y blandos, que pueden llevar a un éxito o fracaso del tratamiento; por lo cual se debe tener una planeación adecuada del tratamiento, dependiendo las características individuales del paciente. La utilización de prótesis realizadas en metal cerámica, que ha venido siendo reemplazada por el uso de sistemas totalmente cerámicos ha llevado a desarrollar materiales con una resistencia y propiedades equivalentes a las prótesis convencionales con el fin de dar un resultado final más estético. Al encontrar pacientes cuya preocupación es el cambio de prótesis removibles por prótesis fijas en los que se encuentra una  mayor pérdida dental, se debe evaluar la posibilidad y  viabilidad de realizar prótesis fijas , que pueden ofrecer resultados más estéticos, sin comprometer la resistencia y duración del tratamiento a largo plazo, además de encontrar condiciones desfavorables como puede ser la perdida de dimensión vertical, o desgastes dentales extensos que requieran de una rehabilitación integral para el éxito del  tratamiento, aspectos importantes para la elección del material ideal para el caso individual del paciente.

  18. Reporte de caso: restauración del sector anterior con prótesis parcial fija en cerámica de fluorapatita

    Directory of Open Access Journals (Sweden)

    Janeth Mercedes Rojas Murillo

    2012-09-01

    Full Text Available La necesidad de restauración del sector anterior, no solo por estética sino para mejorar la función y autoestima del paciente, lleva a pensar en satisfacer estos requerimientos teniendo en cuenta los inconvenientes que dependen del estado inicial, involucrando los tejidos duros y blandos, que pueden llevar a un éxito o fracaso del tratamiento; por lo cual se debe tener una planeación adecuada del tratamiento, dependiendo las características individuales del paciente. La utilización de prótesis realizadas en metal cerámica, que ha venido siendo reemplazada por el uso de sistemas totalmente cerámicos ha llevado a desarrollar materiales con una resistencia y propiedades equivalentes a las prótesis convencionales con el fin de dar un resultado final más estético. Al encontrar pacientes cuya preocupación es el cambio de prótesis removibles por prótesis fijas en los que se encuentra una  mayor pérdida dental, se debe evaluar la posibilidad y  viabilidad de realizar prótesis fijas , que pueden ofrecer resultados más estéticos, sin comprometer la resistencia y duración del tratamiento a largo plazo, además de encontrar condiciones desfavorables como puede ser la perdida de dimensión vertical, o desgastes dentales extensos que requieran de una rehabilitación integral para el éxito del  tratamiento, aspectos importantes para la elección del material ideal para el caso individual del paciente.

  19. A novel magnetic lead screw active suspension system for vehicles

    DEFF Research Database (Denmark)

    Berg, Nick Ilsø; Holm, Rasmus Koldborg; Rasmussen, Peter Omand

    2014-01-01

    This paper encompasses a detailed study of the redesign of a novel Magnetic Lead Screw (MLS) active suspension system for possible regeneration of the energy dispatched in the suspension system and active control of vehicle body movement. The MLS converts a low speed high force linear motion...... of a translator into a high speed low torque rotational motion of a rotor through helically shaped magnets. The paper describes the drawback of the first MLS prototype v1.0 developed for active suspension system, which lead to a new design of the MLS prototype named v1.5. Furthermore the paper introduces detailed...

  20. Modelling nonlinear viscoelastic behaviours of loudspeaker suspensions-like structures

    Science.gov (United States)

    Maillou, Balbine; Lotton, Pierrick; Novak, Antonin; Simon, Laurent

    2018-03-01

    Mechanical properties of an electrodynamic loudspeaker are mainly determined by its suspensions (surround and spider) that behave nonlinearly and typically exhibit frequency dependent viscoelastic properties such as creep effect. The paper aims at characterizing the mechanical behaviour of electrodynamic loudspeaker suspensions at low frequencies using nonlinear identification techniques developed in recent years. A Generalized Hammerstein based model can take into account both frequency dependency and nonlinear properties. As shown in the paper, the model generalizes existing nonlinear or viscoelastic models commonly used for loudspeaker modelling. It is further experimentally shown that a possible input-dependent law may play a key role in suspension characterization.

  1. Correlated particle dynamics in concentrated quasi-two-dimensional suspensions

    International Nuclear Information System (INIS)

    Diamant, H; Cui, B; Lin, B; Rice, S A

    2005-01-01

    We investigate theoretically and experimentally how the hydrodynamically correlated lateral motion of particles in a suspension confined between two surfaces is affected by the suspension concentration. Despite the long range of the correlations (decaying as 1/r 2 with the inter-particle distance r), the concentration effect is present only at short inter-particle distances for which the static pair correlation is nonuniform. This is in sharp contrast with the effect of hydrodynamic screening in unconfined suspensions, where increasing the concentration changes the prefactor of the large-distance correlation

  2. A Kinematic, Kevlar(registered) Suspension System for an ADR

    Science.gov (United States)

    Voellmer, George M.; Jackson, Michael L.; Shirron, Peter J.; Tuttle, James G.

    2003-01-01

    The High Resolution Airborne Wideband Camera (HAWC) and the Submillimeter And Far Infrared Experiment (SAFIRE) will use identical Adiabatic Demagnetization Refrigerators (ADR) to cool their bolometer detectors to 200mK and 100mK, respectively. In order to minimize thermal loads on the salt pill, a Kevlar@ suspension system is used to hold it in place. An innovative, kinematic suspension system is presented. The suspension system is unique in that it consists or two parts that can be assembled and tensioned offline, and later bolted onto the salt pill. The resulting assembly constrains each degree of freedom only once, yielding a kinematic, tensile structure.

  3. On reactive suspension plasma spraying of calcium titanate

    OpenAIRE

    Kotlan, J. (Jiří); Pala, Z. (Zdeněk); Mušálek, R. (Radek); Ctibor, P. (Pavel)

    2016-01-01

    This study shows possibility of preparation of calcium titanate powder and coatings by reactive suspension plasma spraying. Suspension of mixture of calcium carbonate (CaCO3) and titanium dioxide (TiO2) powders in ethanol was fed into hybrid plasma torch with a DC-arc stabilized by a water–argon mixture (WSP-H 500). Various feeding distances and angles were used in order to optimize suspension feeding conditions. In the next step, the coatings were deposited on stainless steel substrates and ...

  4. Aporte de Minerales del mate cocido a la dieta

    Directory of Open Access Journals (Sweden)

    Lorena Francini

    2011-04-01

    Full Text Available Este trabajo surgió como la continuación del trabajo "YERBA MATE... ¿SIMPLEMENTE UN HABITO O UN BUEN ALIMENTO?" en el cual se analizó el contenido total de: K, Mn, Mg, Ca, Fe, Zn, Na, Cu y Ni en once yerbas comercializadas en Uruguay.En la región comprendida por Argentina, Uruguay, Brasil y Paraguay la yerba mate se consume mayoritariamente como mate (extracción en caliente, tereré (extracción en frío y mate cocido (infusión caliente. A los efectos de conocer el aporte de minerales de la yerba a la dieta diaria, se analizó el contenido de K, Mn, Mg, Fe y Zn (por ser los presentes en mayor cantidad en la yerba mate en una simulación de mate cocido, con lo que se determinó que porcentaje de estos es extraído en dicha infusión.Para realizar la simulación de mate cocido, se colocaron 50g de yerba mate en 1L de agua desionizada y se calentó en plancha con agitación hasta alcanzar una temperatura de 99°C. La solución sobrenadante fue filtrada en caliente en filtro de papel de 640W y luego en frío a través de filtro de membrana de 0,45 µm. Los minerales antes mencionados fueron determinados por espectroscopía de emisión óptica (PERKIN ELMER OPTIMA 2100. Obteniéndose como resultado Zn= 2,9mg/L, Fe= 0,36mg/L, Mn= 57mg/L, K= 848mg/L en el extracto preparado como se mencionó anteriormente. Representando una extracción del contenido total de la yerba mate cercano al 100% para potasio y cinc, del 70% para el manganeso y del 2% para el hierro.De los resultados obtenidos se concluye que de consumirse un litro de mate cocido diario preparado en forma similar a la de este trabajo, se cubrirían ampliamente los requerimientos diarios de manganeso, se cubriría el 50% de los requerimientos diarios de magnesio, el 20% de los de potasio y cinc y el 6% de los de hierro.La yerba mate es un alimento ampliamente difundido y en los estratos sociales más bajos llega a sustituir una o más comidas diarias, lo que convierte a la I

  5. Calidad del coque de Horno Alto en la Unión Europea

    Directory of Open Access Journals (Sweden)

    Alvarez, R.

    2002-10-01

    Full Text Available After a brief review of the coking technology at the beginning of the new millennium, blast furnace coke quality criteria of most of EU countries, presented by the European Blast Furnace Committee in the 4th European Coke and Ironmaking Congress, are compared with those used by the Spanish Steel Industry at Aceralia. Blast furnace coke quality is very high in EU's countries in order to meet the requirements of bigger blast furnaces commissioned in the last years. CSR index is the most important parameter in the control of coke quality in Europe.

    En el presente trabajo se ha llevado a cabo una breve revisión de las tecnologías de coquización existentes al comienzo del nuevo milenio. Los criterios de calidad del coque de Horno Alto de la mayoría de los países de la Unión Europea, recogidos por el European Blast Furnace Committee, y que fueron presentados en el 4th European Coke and Ironmaking Congress en París durante el año 2000, se comparan con los utilizados por la industria siderúrgica española Aceralia. Como consecuencia del sensible aumento experimentado en el tamaño de los modernos Hornos Altos durante los últimos años, se ha podido comprobar que, en la UE, los valores de los diversos parámetros de control de calidad del coque son bastante similares y con unos requerimientos muy elevados. Asimismo, en la UE el parámetro CSR se ha convertido en el más importante para el control de la calidad del coque de Horno Alto.

  6. El Cultivo del Caucho y su Establecimiento en la Zona de Porce II

    Directory of Open Access Journals (Sweden)

    Bustamante Betancur Orlando

    1994-09-01

    Full Text Available En este trabajo se presenta un estudio detallado de los suelos y clima de la región que comprende el proyecto hidroeléctrico Porce II de las Empresas Públicas de Medellín, comparativo con las condiciones que tienen las zonas caucheras del país y del mundo, con el fin de determinar las áreas aptas para el establecimiento de una explotación comercial. Se encontró que los requerimientos de clima y suelo del caucho están dentro de los parámetros que tiene la zona y de acuerdo con otras restricciones de pendiente y pedregosidad, se seleccionaron 1990 hectáreas para su establecimiento, distribuidas a lo largo y ancho de la cuenca hidrográfica. También se presenta en este artículo una descripción de las prácticas agronómicas del cultivo del caucho y las condiciones de manejo, propias para la zona estudiada. Se dan recomendaciones para las diferentes etapas relacionadas con la propagación y la producción de material vegetal (semillero, jardín clonal y vivero, la siembra y la explotación durante el período productivo de la plantación establecida. Finalmente se contemplan algunos aspectos sobre costos por actividades, la producción promedio de caucho seco y los ingresos en valores por hectárea año que genera el cultivo.

  7. Uso eficiente del agua para el cultivo de rosa cv. Freedom bajo invernadero

    Directory of Open Access Journals (Sweden)

    John J. Arévalo-H

    2013-08-01

    Full Text Available Determinar el requerimiento de agua y el momento adecuado de distribución, es un factor fundamental para el cultivo de flores. El objetivo del presente trabajo fue determinar el efecto de la aplicación de tres láminas de riego sobre el desarrollo y producción del cultivo de la Rosa cv. Freedom, bajo invernadero. El experimento se realizó con tres láminas de riego en un cultivo de rosa (Rosa spp. cv. Freedom. Se analizó el crecimiento de los tallos florales, la vida en florero, la producción y la eficiencia en el uso del agua. Los tratamientos se basaron en tres niveles de evapotranspiración de cultivo (ETc (70, 80 y 100%. Durante el estudio, el cultivo se mantuvo en producción constante. Se aplicaron 384,87, 254,25 y 218,97 m³ correspondiente a 100, 80 e 70% de ETc respectivamente, significando un ahorro de agua de 14,0 y 21,8% en el 80 e 70% de ETc respectivamente. El coeficiente de cultivo (Kc vario entre 0,58 y 1,65, con una media de 1,13. No se encontraron diferencias en la producción. Las curvas de crecimiento presentaron incremento continuo, con ajuste al modelo logístico. El 70% de ETc presentó la mayor eficiencia en el uso del agua, con 185 tallos m-3. La conservación media de los tallos florales fue de 12 a 15 días. La mayor causa de pérdida fue la deshidratación, que inició en el día 11, comportamiento normal del tallo floral.

  8. FORGING DEFECTS ANALYSIS IN SUSPENSION ARMAND FLASH CONTROL

    OpenAIRE

    Mr Jadhav Vijay B. , Prof. Mundhe V.L. , Dr. Narve N.G.

    2018-01-01

    The suspension arms in the process of fogging are made by different material and in that processes get various problems are found. In that paper list out that problem and solving flash wastage problem.

  9. Study of shear thickening behavior in colloidal suspensions

    Directory of Open Access Journals (Sweden)

    N Maleki Jirsaraee

    2015-01-01

    Full Text Available We studied the shear thickening behavior of the nano silica suspension (silica nanoparticles 12 nm in size suspended in ethylene glycol under steady shear. The critical shear rate for transition into shear thickening phase was determined at different concentrations and temperatures. The effect of temperature and concentration was studied on the shear thickening behavior. In silica suspension, it was observed that all the samples had a transition into shear thickening phase and also by increasing the temperature, critical shear rate increased and viscosity decreased. Our observations showed that movement in silica suspension was Brownian and temperature could cause a delay in transition into shear thickening phase. Yet, we observed that increasing the concentration would decrease critical shear rate and increase viscosity. Increasing temperature increased Brownian forces and increasing concentration increased hydrodynamic forces, confirming the contrast between these two forces for transition into shear thickening phase for the suspensions containing nano particles

  10. Degradability of aged aquatic suspensions of C60 nanoparticles

    DEFF Research Database (Denmark)

    Hartmann, B.; Buendia, Inmaculada M.; Baun, Anders

    2011-01-01

    While studies of the potential human and environmental effects of C60 and its derivatives are emerging in the scientific literature, the environmental fate of C60 is still largely unknown. In this study, aged aqueous suspensions of C60 (nC60) were investigated in the respirometric OECD test...... for ready biodegradability. Two suspensions of nC60 were prepared by stirring and aged under indirect exposure to sunlight for 36 months, which resulted in relatively stable suspensions with a dark-brown colour. The suspended nC60 could not be extracted into toluene and indicating that the particles were...... no longer present as underivatised nC60 but had undergone a transformation. TEM images and particle tracking analysis showed that the suspension consisted of particle aggregates with a size of 156 nm (SD=54nm) and 139nm (Sd=49), respectively, but also contained smaller aggregates. Samples of the nC60...

  11. Self-Suspended Suspensions of Covalently Grafted Hairy Nanoparticles

    KAUST Repository

    Choudhury, Snehashis; Agrawal, Akanksha; Kim, Sung A; Archer, Lynden A.

    2015-01-01

    length scales. On mesoscopic length scales, the suspensions display exceptional homogeneity and colloidal stability. We attribute this feature to steric repulsions between grafted chains and the space-filling constraint on the tethered chains

  12. Influence of crystal habit on trimethoprim suspension formulation.

    Science.gov (United States)

    Tiwary, A K; Panpalia, G M

    1999-02-01

    The role of crystal habit in influencing the physical stability and pharmacokinetics of trimethoprim suspensions was examined. Different habits for trimethoprim (TMP) were obtained by recrystallizing the commercial sample (PD) utilizing solvent-change precipitation method. Four distinct habits (microscopic observation) belonging to the same polymorphic state (DSC studies) were selected for studies. Preformulation and formulation studies were carried out on suspension dosage forms containing these crystals. The freshly prepared suspensions were also evaluated for their pharmacokinetic behaviour on healthy human volunteers using a cross over study. Variation of crystallization conditions produces different habits of TMP. Among the different crystal habits exhibiting same polymorphic state, the most anisometric crystal showed best physical stability in terms of sedimentation volume and redispersibility. However, habit did not significantly affect the extent of TMP excreted in urine. Modification of surface morphology without significantly altering the polymorphic state can be utilized for improving physical stability of TMP suspensions. However, the pharmacokinetic profile remains unaltered.

  13. Improved production of chlorogenic acid from cell suspension ...

    African Journals Online (AJOL)

    Chlorogenic acid is a free radical scavenger, antibacterial, anti- inflammatory, antiviral, hypoglycemic, and in addition to ... experiments, the effect of various strengths of B5 medium (1/4 .... Growth kinetics of L. macranthoides cell suspension ...

  14. Solution or suspension - Does it matter for lipid based systems?

    DEFF Research Database (Denmark)

    Larsen, A T; Holm, R; Müllertz, A

    2017-01-01

    In this study, the potential of co-administering an aqueous suspension with a placebo lipid vehicle, i.e. chase dosing, was investigated in rats relative to the aqueous suspension alone or a solution of the drug in the lipid vehicle. The lipid investigated in the present study was Labrafil M2125CS...... and three evaluated poorly soluble model compounds, danazol, cinnarizine and halofantrine. For cinnarizine and danazol the oral bioavailability in rats after chase dosing or dosing the compound dissolved in Labrafil M21515CS was similar and significantly higher than for the aqueous suspension....... For halofantrine the chase dosed group had a tendency towards a low bioavailability relative to the Labrafil M2125CS solution, but still a significant higher bioavailability relative to the aqueous suspension. This could be due to factors such as a slower dissolution rate in the intestinal phase of halofantrine...

  15. A simple route to prepare stable hydroxyapatite nanoparticles suspension

    International Nuclear Information System (INIS)

    Han Yingchao; Wang Xinyu; Li Shipu

    2009-01-01

    A simple ultrasound assisted precipitation method with addition of glycosaminoglycans (GAGs) is proposed to prepare stable hydroxyapatite (HAP) nanoparticles suspension from the mixture of Ca(H 2 PO 4 ) 2 solution and Ca(OH) 2 solution. The product was characterized by XRD, FT-IR, TEM, HRTEM and particle size, and zeta potential analyzer. TEM observation shows that the suspension is composed of 10-20 nm x 20-50 nm short rod-like and 10-30 nm similar spherical HAP nanoparticles. The number-averaged particle size of stable suspension is about 30 nm between 11.6 and 110.5 nm and the zeta potential is -60.9 mV. The increase of stability of HAP nanoparticles suspension mainly depends on the electrostatic effect and steric effect of GAGs. The HAP nanoparticles can be easily transported into the cancer cells and exhibit good potential as gene or drug carrier system.

  16. In vitro production of azadirachtin from cell suspension cultures of ...

    Indian Academy of Sciences (India)

    PRAKASH KUMAR G

    proven effective in the control of agricultural pests in an environmentally ..... Prakash G and Srivastava A K 2005 Statistical media optimization for cell growth and ... Juss. suspension cultures; Process Biochemistry 40 3795–3800. Prakash G ...

  17. Weakly sheared active suspensions: hydrodynamics, stability, and rheology.

    Science.gov (United States)

    Cui, Zhenlu

    2011-03-01

    We present a kinetic model for flowing active suspensions and analyze the behavior of a suspension subjected to a weak steady shear. Asymptotic solutions are sought in Deborah number expansions. At the leading order, we explore the steady states and perform their stability analysis. We predict the rheology of active systems including an activity thickening or thinning behavior of the apparent viscosity and a negative apparent viscosity depending on the particle type, flow alignment, and the anchoring conditions, which can be tested on bacterial suspensions. We find remarkable dualities that show that flow-aligning rodlike contractile (extensile) particles are dynamically and rheologically equivalent to flow-aligning discoid extensile (contractile) particles for both tangential and homeotropic anchoring conditions. Another key prediction of this work is the role of the concentration of active suspensions in controlling the rheological behavior: the apparent viscosity may decrease with the increase of the concentration.

  18. Large Scale Brownian Dynamics of Confined Suspensions of Rigid Particles

    Science.gov (United States)

    Donev, Aleksandar; Sprinkle, Brennan; Balboa, Florencio; Patankar, Neelesh

    2017-11-01

    We introduce new numerical methods for simulating the dynamics of passive and active Brownian colloidal suspensions of particles of arbitrary shape sedimented near a bottom wall. The methods also apply for periodic (bulk) suspensions. Our methods scale linearly in the number of particles, and enable previously unprecedented simulations of tens to hundreds of thousands of particles. We demonstrate the accuracy and efficiency of our methods on a suspension of boomerang-shaped colloids. We also model recent experiments on active dynamics of uniform suspensions of spherical microrollers. This work was supported in part by the National Science Foundation under award DMS-1418706, and by the U.S. Department of Energy under award DE-SC0008271.

  19. Optimal Vibration Control for Tracked Vehicle Suspension Systems

    Directory of Open Access Journals (Sweden)

    Yan-Jun Liang

    2013-01-01

    Full Text Available Technique of optimal vibration control with exponential decay rate and simulation for vehicle active suspension systems is developed. Mechanical model and dynamic system for a class of tracked vehicle suspension vibration control is established and the corresponding system of state space form is described. In order to prolong the working life of suspension system and improve ride comfort, based on the active suspension vibration control devices and using optimal control approach, an optimal vibration controller with exponential decay rate is designed. Numerical simulations are carried out, and the control effects of the ordinary optimal controller and the proposed controller are compared. Numerical simulation results illustrate the effectiveness of the proposed technique.

  20. Establishment of the callus and cell suspension culture of ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-10-05

    Oct 5, 2009 ... Full Length Research Paper. Establishment of the callus ... study provided an efficient way for E. angustifolia cell suspension culture to produce secondary metabolite. .... was also observed that in these treatments the stem.

  1. Effective viscosity of 2D suspensions - Confinement effects

    Science.gov (United States)

    Peyla, Philippe; Priem, Stephane; Vincent, Doyeux; Farutin, Alexander; Ismail, Mourad

    2014-11-01

    We study the rheology of a sheared 2D suspension of non-Brownian disks in presence of walls. Although, it is of course possible today with modern computers and powerful algorithms to perform direct numerical simulations that fully account for multiparticle 3D interactions, the analysis of the simple case of a 2D suspension, provides valuable insights and helps to understand 3D results. For instance, we examine the role of particle-wall and particle-particle interactions in determining the rheology of confined sheared suspensions. In addition we evaluate the intrinsic viscosity as well as the contribution of hydrodynamic interactions to the dissipation as a function of a wide range of confinements. Thanks to the direct visualisation of the whole 2D Stokes flow, we are able to give a clear interpretation about the rheology of semi-dilute confined suspensions.

  2. Effect of the crone suspension control system on braking

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, X.; Oustaloup, A. [Bordeaux-1 Univ., Talence (France). Lab. d' Automatique et de Productique; Nouillant, C. [Bordeaux-1 Univ., Talence (France). Lab. d' Automatique et de Productique]|[DRIA-PSA Peugeot Citroen, Velizy - Villacoublay (France)

    2001-07-01

    Semi-active or active suspensions not only increase driving comfort, but also permit the control system to be switched over if required in order to improve the transmission of forces at the points of contact between tire and road surface by minimizing the dynamic wheel loads. It may also be possible to use these systems to control wheel load distribution and, thus, influence braking or steering performance by changing the distribution of normal forces between the front and rear axles. This article examines the effect of the CRONE suspension control system on braking. The central idea is to use continuously variable dampers and fast load levelling devices to distribute the normal forces of tire between the front and rear axles. The basis principle is explained using known dynamic properties of active suspension, vehicles and tires. The effect of active suspension on vehicle response during braking is then evaluated using computer simulations from a two-wheel vehicle model. (orig.)

  3. Establishment of sorghum cell suspension culture system for ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-03-18

    Mar 18, 2008 ... Additionally, sorghum cell suspension cultures have been initiated from the friable ... proteomics technologies. The field of proteomics is .... air dried at room temperature and resuspended in 2 ml of urea buffer [9 M urea, 2 M ...

  4. Structure and rheology of nanoparticle–polymer suspensions

    KAUST Repository

    Srivastava, Samanvaya; Shin, Jung Hwan; Archer, Lynden A.

    2012-01-01

    separation and aggregation than expected from theory for interacting brushes. SAXS and rheology measurements also reveal that at high particle loadings, the stabilizing oligomer brush is significantly compressed and produces jamming in the suspensions

  5. Rheological studies of aqueous stabilised nano-zirconia particle suspensions

    Directory of Open Access Journals (Sweden)

    Asad Ullah Khan

    2012-02-01

    Full Text Available In the present investigation aqueous suspensions of nano- and colloidal range particles are stabilised by changing the ambient pH. Rheology is used to establish the stability of the suspensions and it is found that the rheology of the suspensions is strongly dependent on the pH values. The viscosity is highest close to the iso-electric point of the powders. At the iso-electric point the net surface charge on the powder particles is zero and is the cause of the high viscosity. Away from the iso-electric point, the particles are charged, giving rise to a double layer phenomenon and causing the reduction in viscosity. It is also found that increasing the solid contents of the suspensions reduces the pH region of low viscosity.

  6. Well-dispersed gold nanowire suspension for assembly application

    International Nuclear Information System (INIS)

    Xu Cailing; Zhang Li; Zhang Haoli; Li Hulin

    2005-01-01

    A method for fabricating well-dispersed nanowire suspension has been demonstrated in the paper. Thin gold nanowires were prepared by template synthesis, and then functionalized with sulphonate group-terminated thiols before suspended in different solvents. The degree of aggregation of the obtained suspension was evaluated with transmission electron microscopy (TEM) and UV-vis spectroscopy. It was found that the degree of aggregation was predominated by the solvents, and the best degree of dispersion was obtained when isopropyl alcohol (IPA) was used as the solvent. The gold nanowires from the suspension can be selectively assembled onto chemically patterned substrates. This well-dispersed nanowire suspension is potentially useful for fabricating novel nanodevices

  7. Sugar transport by maize endosperm suspension cultures

    International Nuclear Information System (INIS)

    Felker, F.C.; Goodwin, J.C.

    1987-01-01

    To determine the mechanism of sugar uptake by suspension cultures derived from developing maize (Zea mays L.) endosperm, incorporation of radioactivity from 14 C-sugars by the tissue in the mid-log phase of growth was examined. Among the sugars tested was l'-deoxy-l'-fluorosucrose (FS), a derivative not hydrolyzed by invertase but recognized by sucrose carriers in other systems. At 40 mM, uptake of label from FS was 23% of that from sucrose, while uptake of label from L-glucose (used as a control for medium carry-over and adsorption) was 16% of that from sucrose. Uptake of label from sucrose did not increase at concentrations above 50 mM, possibly due to a rate-limiting requirement for extracellular hydrolysis. Kinetic analysis revealed both saturable and linear components of uptake for glucose and fructose. The rate of fructose uptake exceeded that of glucose at all concentrations. Fructose uptake at 20 mM was inhibited by NaN 3 , HgCl 2 , dinitrophenol, carbonyl cyanide m-chlorophenylhydrazone, and p-chloromercuribenzenesulfonic acid. Results suggest that sucrose is hydrolyzed prior to uptake, and that fructose is transported preferentially by a carrier sensitive to an external sulfhydryl group inhibitor. Metabolic activity is required for sugar uptake. The specificity of the hexose transporter is currently being investigated

  8. Acoustic manipulation of bacteria cells suspensions

    Science.gov (United States)

    GutiéRrez-Ramos, Salomé; Hoyos, Mauricio; Aider, Jean Luc; Ruiz, Carlos; Acoustofluidics Team Team; Soft; Bio Group Collaboration

    An acoustic contacless manipulation gives advantages in the exploration of the complex dynamics enviroment that active matter exhibits. Our works reports the control confinement and dispersion of Escherichia coliRP437-pZA3R-YFP suspensions (M9Glu-Ca) via acoustic levitation.The manipulation of the bacteria bath in a parallel plate resonator is achieved using the acoustic radiation force and the secondary radiation force. The primary radiation force generates levitation of the bacteria cells at the nodal plane of the ultrasonic standing wave generated inside the resonator. On the other side, secondary forces leads to the consolidation of stable aggregates. All the experiments were performed in the acoustic trap described, where we excite the emission plate with a continuous sinusoidal signal at a frequency in the order of MHz and a quartz slide as the reflector plate. In a typical experiment we observed that, before the input of the signal, the bacteria cells exhibit their typical run and tumble behavior and after the sound is turned on all of them displace towards the nodal plane, and instantaneously the aggregation begins in this region. CNRS French National Space Studies, CONACYT Mexico.

  9. Survey of potential applications of superconducting suspensions

    International Nuclear Information System (INIS)

    Rao, D.K.; Bupara, S.S.

    1993-01-01

    The purpose of this report is to survey the recent developments in applying the bulk superconductors to mechanical applications. These applications, called superconducting suspensions, can be broadly divided into three groups - Passive Magnetic Bearings, Passive Superconducting Dampers and Active Superconducting Bearings. Basically, passive magnetic bearings utilize bulk superconductors to support a rotating shaft without contact while active superconducting bearings employ superconducting wires. Passive superconducting dampers, on the other hand, dissipate energy from a vibrating component. Over the past one year, dramatic improvements have been made in processing large-size specimens made of high grade bulk superconductors. As a result, they can meet the size requirements and load capacity requirements of many applications. With this size-scale up, one can utilize them in a wider number of applications than what was possible a few years back. At present several organizations have demonstrated the capability of passive magnetic bearings. The targeted applications include miniature cryoturboexpanders, cryoturbopumps, energy storage wheels and turbomolecular pumps. These demonstrations indicate that the passive magnetic bearings are closer to technology maturity. (orig.)

  10. Mirror suspension system for the TAMA SAS

    International Nuclear Information System (INIS)

    Takamori, Akiteru; Ando, Masaki; Bertolini, Alessandro; Cella, Giancarlo; DeSalvo, Riccardo; Fukushima, Mitsuhiro; Iida, Yukiyoshi; Jacquier, Florian; Kawamura, Seiji; Marka, Szabolcs; Nishi, Yuhiko; Numata, Kenji; Sannibale, Virginio; Somiya, Kentaro; Takahashi, Ryutaro; Tariq, Hareem; Tsubono, Kimio; Ugas, Jose; Viboud, Nicolas; Yamamoto, Hiroaki; Yoda, Tatsuo; Wang Chenyang

    2002-01-01

    Several R and D programmes are ongoing to develop the next generation of interferometric gravitational wave detectors providing the superior sensitivity desired for refined astronomical observations. In order to obtain a wide observation band at low frequencies, the optics need to be isolated from the seismic noise. The TAMA SAS (seismic attenuation system) has been developed within an international collaboration between TAMA, LIGO, and some European institutes, with the main objective of achieving sufficient low-frequency seismic attenuation (-180 dB at 10 HZ). The system suppresses seismic noise well below the other noise levels starting at very low frequencies above 10 Hz. It also includes an active inertial damping system to decrease the residual motion of the optics enough to allow a stable operation of the interferometer. The TAMA SAS also comprises a sophisticated mirror suspension subsystem (SUS). The SUS provides support for the optics and vibration isolation complementing the SAS performance. The SUS is equipped with a totally passive magnetic damper to suppress internal resonances without degrading the thermal noise performance. In this paper we discuss the SUS details and present prototype results

  11. Magnetic suspension characteristics of electromagnetic actuators

    Science.gov (United States)

    Rao, Dantam K.; Dill, J.; Zorzi, E.

    1993-01-01

    Electromagnetic actuators that use a current-carrying coil (which is placed in a magnetic field) to generate mechanical force are conceptually attractive components for active control of rotating shafts. In one concept that is being tested in the laboratory, the control forces from such actuators are applied on the flexibly supported bearing housings of the rotor. Development of this concept into a practical reality requires a clear and thorough understanding of the role of electromechanical parameters of these actuators in delivering the right amount of control force at the right phase into the rotor. The electromechanical parameters of the actuators investigated are the mass of the armature, stiffness of its suspension, electrical resistance, and inductance of the coils. Improper selection of these parameters can result in degradation in their performance, leading to mistuning between the actuator and the rotor. Through a simple analysis, it is shown that use of such mistuned actuators could result in sharp fluctuations in the phase of the control force delivered into the rotor around the critical speeds. These sharp fluctuations in phase, called 'Phase Glitches', are undesirable. Hence, future designs of controllers should take into account the undesirable mistuning effects between the actuator and the rotor caused by the phase glitches.

  12. Equation of state of charged latex suspensions

    International Nuclear Information System (INIS)

    Reus, Valerie

    1995-01-01

    We measured the osmotic pressure of charged bromo-polystyrene particles suspensions in the dilute System (0,01-10% in volume fraction). The typical range of differences in water heights varies from one millimeter to a few centimeters. When particles are polydisperse, samples remain always sols but if particles are monodisperse, they can form supramolecular crystals stabilized by electrostatic repulsions. These crystals exist only when the ionic force is very low, about one μmole/l. We determined the structure of these assemblies by light and X-ray scattering as function of the volume fraction. At low volume fractions, crystals adopt a body centered cubic structure; when the concentration increases, they become more compact and we observe face centered cubic structures. After shearing, defects may appear and two dimensional hexagonal structures can be found. This type of study of the osmotic pressure versus distance (in the range 300 nm) is equivalent to a highly precise atomic force measurement, since it allows detection of forces as small as 10 -11 -10 -12 N. (author) [fr

  13. Sedimentation of athermal particles in clay suspensions

    Science.gov (United States)

    Clotet, Xavier; Kudrolli, Arshad

    2015-03-01

    We discuss sedimentation of athermal particles in dense clay suspensions which appear liquid-like to glass-like. These studies are motivated by the physics important to a diverse range of problems including remediation of oil sands after the extraction of hydrocarbons, and formation of filter cakes in bore wells. We approach this problem by first considering collective sedimentation of athermal spherical particles in a viscous liquid in quasi-two dimensional and three dimensional containers. We examine the system using optical and x-ray tomography techniques which gives particle level information besides global information on the evolution of the volume fraction. Unlike sediments in the dilute limit - which can be modeled as isolated particles that sediment with a constant velocity and slow down exponentially as they approach the bottom of the container - we find interaction between the particles through the viscous fluids leads to qualitatively differences. We find significant avalanching behavior and cooperative motion as the grains collectively settle, and non-exponential increase in settling time. We discuss the effect of stirring caused by the sedimenting particles on their viscosity and consequently the sedimentation rates as a function of particle concentration. Supported by Petroleum Research Fund Grant PRF # 54045-ND9.

  14. Rheology of dense suspensions of non colloidal particles

    OpenAIRE

    Guazzelli , Elisabeth

    2017-01-01

    International audience; Dense suspensions are materials with broad applications both in industrial processes (e.g. waste disposal, concrete, drilling muds, metalworking chip transport, and food processing) and in natural phenomena (e.g. flows of slurries, debris, and lava). Despite its long research history and its practical relevance, the mechanics of dense suspensions remain poorly understood. The major difficulty is that the grains interact both by hydrodynamic interactions through the liq...

  15. Rheology of dense suspensions of non colloidal particles

    OpenAIRE

    Guazzelli Élisabeth

    2017-01-01

    Dense suspensions are materials with broad applications both in industrial processes (e.g. waste disposal, concrete, drilling muds, metalworking chip transport, and food processing) and in natural phenomena (e.g. flows of slurries, debris, and lava). Despite its long research history and its practical relevance, the mechanics of dense suspensions remain poorly understood. The major difficulty is that the grains interact both by hydrodynamic interactions through the liquid and by mechanical co...

  16. On reactive suspension plasma spraying of calcium titanate

    Czech Academy of Sciences Publication Activity Database

    Kotlan, Jiří; Pala, Zdeněk; Mušálek, Radek; Ctibor, Pavel

    2016-01-01

    Roč. 42, č. 3 (2016), s. 4607-4615 ISSN 0272-8842 R&D Projects: GA ČR GA15-12145S Institutional support: RVO:61389021 Keywords : Suspensions * X-raymethods * Perovskites * Substrates * Suspension plasma spraying Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 2.986, year: 2016 http://www.sciencedirect.com/science/article/pii/S0272884215022646

  17. Theory of superconducting magnet suspension: main results survey

    International Nuclear Information System (INIS)

    Voevodskii, K.E.; Kochetkov, V.M.

    1981-01-01

    A survey is given of theoretical achievements on electro-dynamic suspension of high speed ground vehicles with superconducting magnets. The problems discussed, are calculation of lift and drag forces acting on a superconducting magnet, the latter moving above a guideway structure which may be of two different types (either conducting sheet or a series of discrete loops); influence of irregularities of the guideway structure; vertical and longitudinal stability of suspension. (author)

  18. Stability Prediction of Polymeric Suspensions of some Fluoroquinolones

    OpenAIRE

    Subhashree Sahoo; Chandra Kanti Chakraborti; Pradipta Kumar Behera

    2014-01-01

    Considering the importance of physical stability, zeta potential values, percentage volume of sedimentation and redispersibility of polymeric suspensions of some fluoroquinolones like Ciprofloxacin (Cipro) and Ofloxacin (Oflox) were measured. These formulations were prepared using two grades of Carbopol polymer such as C934 and C940; and Hydroxypropyl methylcellulose (HPMC). Above mentioned values of each suspension was determined by following standard methods. The results of those experiment...

  19. Viscosity, thermal diffusivity and Prandtl number of nanoparticle suspensions

    Institute of Scientific and Technical Information of China (English)

    WANG Buxuan; ZHOU Leping; PENG Xiaofeng

    2004-01-01

    Using our reported experimental data of effective thermal conductivity, specific heat capacity and viscosity for CuO nanoparticle suspensions, the corresponding thermal diffusivity and Prandtl number are calculated. With the hard sphere model and considering effects of particle clustering and surface adsorption, the increase of viscosity for nanoparticle suspension observed is explained. It is shown that the effective thermal conductivity will be strongly affected by the formation and correlated spatial distribution of nanoparticle clusters when compared to viscosity in hosting liquid.

  20. Stability of allopurinol and of five antineoplastics in suspension.

    Science.gov (United States)

    Dressman, J B; Poust, R I

    1983-04-01

    The stability of allopurinol, azathioprine, chlorambucil, melphalan, mercaptopurine, and thioguanine each in an extemporaneously prepared suspension was studied. Tablets of each drug were crushed, mixed with a suspending agent, and brought to a final volume of 10, 15, or 20 ml with a 2:1 mixture of simple syrup and wild cherry syrup. Suspensions were prepared in the following concentrations: allopurinol (20 mg/ml), azathioprine (50 mg/ml), chlorambucil (2 mg/ml), melphalan (2 mg/ml), mercaptopurine (50 mg/ml), and thioguanine (40 mg/ml). Using high-performance liquid chromatography or ultraviolet scans, duplicate assays were performed on each suspension periodically during storage for up to 84 days at ambient room temperature or 5 degrees C. The time required for the suspensions to drop below 90% of labeled strength was used as an indicator of drug stability. Allopurinol and azathioprine were stable for at least 56 days at room temperature and at 5 degrees C. Chlorambucil decomposed rapidly at room temperature but was stable for seven days when stored at 5 degrees C. Melphalan suspensions did not meet the stated criteria for stability even at the time of initial assay. Mercaptopurine and thioguanine were stable for 14 and 84 days, respectively, at room temperature; at 5 degrees C, assay values dropped below those obtained at room temperature. In the suspension formulation tested, allopurinol, azathioprine, mercaptopurine, and thioguanine are stable for at least 14 days at room temperature; chlorambucil suspensions should be refrigerated and discarded after seven days. Melphalan decomposes too rapidly to make this suspension formulation feasible for extemporaneous compounding.

  1. Tecnología de riego, cultura y desarrollo empresarial en la reconversión agropecuaria del distrito de riego del alto Chicamocha

    Directory of Open Access Journals (Sweden)

    Hernando Espejo Fonseca

    2016-04-01

    Full Text Available La actividad agropecuaria en los distritos de riego debe ser dinámica por definición, lo que implica la adopción de relaciones de producción modernas con capacidad para articularse efectivamente a los nuevos requerimientos de mercados cada vez más exigentes y cambiantes; deben ser igualmente flexibles para adaptarse fácilmente a un entorno caracterizado por las demandas que implica la competencia y la liberalización del comercio mundial. Sin embargo, en el distrito de riego del alto Chicamocha, cuyo objetivo fundamental es lograr la reconversión productiva hacia actividades principalmente agrícolas como base de su desarrollo, se observa una lenta transformación en este tipo de relaciones y se hizo necesario identificar algunos de los factores más relevantes que están dificultando ese proceso; necesario para ubicar el proyecto de irrigación como el punto de partida desde donde se convierta a la región en un gran proveedor de alimentos de acuerdo con las expectativas generadas en los usuarios desde su etapa de formulación. El presente artículo es el resultado del trabajo realizado bajo el mismo título en la Maestría de Desarrollo Rural, en el cuál se identificaron algunos de los factores que explican en parte la situación actual del proyecto, para que con su conocimiento y un manejo adecuado, se conviertan en una estrategia para impulsar el despegue y modernización de la producción agropecuaria en la región.

  2. Resultados postoperatorios inmediatos y a largo plazo de un abordaje mini-invasivo para la corrección de escoliosis idiopática del adolescente

    Directory of Open Access Journals (Sweden)

    Helena Gómez

    2013-12-01

    Full Text Available OBJETIVO: Analizar los resultados de una nueva técnica quirúrgica mínimamente invasiva (MIS, por el inglés "minimally invasive surgery" por vía posterior aislada para la corrección quirúrgica de la escoliosis idiopática del adolescente (EIA. MÉTODOS: Se comparan dos grupos de pacientes con EIA tipo 1A de Lenke, similares en cuanto a edad, género, ángulo de Cobb, ápex de la curva, rotación vertebral, cifosis torácica, niveles de fusión, tipo de instrumentación y seguimiento. El Grupo 1 fue tratado con la técnica mínimamente invasiva que describiremos y el Grupo 2, de forma convencional. Se analizaron el tiempo quirúrgico, la pérdida sanguínea intraoperatoria, los requerimientos analgésicos en el postoperatorio inmediato, la estancia hospitalaria, la tasa de mal posición de los tornillos, la pérdida de corrección, la tasa de pseudoartrosis y la movilización de implantes. RESULTADOS: En el Grupo 1 (MIS la cirugía disminuyó significativamente el sangrado y presentó menor número de casos de tornillos mal posicionados en la concavidad que el grupo tratado de forma convencional; sin embargo la cirugía tuvo mayor duración. Ambos grupos tuvieron requerimientos analgésicos similares y la estancia hospitalaria no presentó diferencias. A largo plazo en ninguno de los dos grupos se encontraron casos de no-unión, pérdidas de corrección, ni movilización de los implantes. CONCLUSIONES: La técnica MIS demostró prolongación del tiempo quirúrgico y menores pérdidas hemáticas, sin disminuir los requerimientos analgésicos ni la estancia hospitalaria. La corrección inicial de la escoliosis por la convexidad disminuyó la incidencia de tornillos mal posicionados en la concavidad, no dio lugar a pérdidas de corrección, movilización de implantes y no-unión.

  3. A magneto rheological hybrid damper for railway vehicles suspensions

    Directory of Open Access Journals (Sweden)

    Gheorghe GHITA

    2012-09-01

    Full Text Available High speed railway vehicles features a specific lateral oscillation resulting from the coupled lateral displacement and yaw of the wheelset which leads to a sinusoid movement of the wheelset along the track, transferred to the entire vehicle. The amplitude of this oscillation is strongly dependant on vehicle’s velocity. Over a certain value, namely the critical speed, the instability phenomenon so-called hunting occurs. To raise the vehicle’s critical speed different designs of the suspension all leading to a much stiffer vehicle can be envisaged. Different simulations prove that a stiffer central suspension will decrease the passenger’s comfort in terms of lateral accelerations of the carboy. The authors propose a semi-active magneto rheological suspension to improve the vehicle’s comfort at high speeds. The suspension has as executive elements hybrid magneto rheological dampers operating under sequential control strategy type balance logic. Using an original mathematical model for the lateral dynamics of the vehicle the responses of the system with passive and semi-active suspensions are simulated. It is shown that the semi-active suspension can improve the vehicle performances.

  4. Particle Image Velocimetry (PIV) Measurements of Suspension-Feeding Velocities

    Science.gov (United States)

    Du Clos, K.; Jones, I. T.; Carrier, T. J.; Jumars, P. A.

    2016-02-01

    Active suspension feeders, such as bivalves and tunicates, connect benthic and pelagic ecosystems by packaging suspended matter into larger fecal and pseudofecal particles, greatly enhancing the flux of carbon and nutrients from the water column to the benthos. The volume of water processed by a population of suspension feeders is commonly estimated by scaling up results from experiments that measure the clearance rate (the volume of water cleared of particles per time) of one or a few individual suspension feeders. Clearance rates vary, however, between species, within a species, and over time for a single individual; and the velocity fields produced by suspension feeders are likely to interact in complex ways. We measured the water velocity fields produced by two species of bivalve, Mya arenaria and Mercenaria mercenaria, and the tunicate Ciona intestinalis, using particle image velocimetry (PIV). We used these measurements to calculate flow rates and Reynolds numbers of inhalant and exhalant siphons. We also observed strong entrainment of water by M. arenaria's exhalant siphon jet that may help to explain how the clam avoids depleting the water around it of particles and oxygen as it feeds. We are using these measurements to inform computational fluid mechanics (CFD) models of suspension feeding, allowing us to examine the interactions of flow fields produced by multiple suspension feeders and other effects not quantified by clearance-rate measurements.

  5. Effect of suspension kinematic on 14 DOF vehicle model

    Science.gov (United States)

    Wongpattananukul, T.; Chantharasenawong, C.

    2017-12-01

    Computer simulations play a major role in shaping modern science and engineering. They reduce time and resource consumption in new studies and designs. Vehicle simulations have been studied extensively to achieve a vehicle model used in minimum lap time solution. Simulation result accuracy depends on the abilities of these models to represent real phenomenon. Vehicles models with 7 degrees of freedom (DOF), 10 DOF and 14 DOF are normally used in optimal control to solve for minimum lap time. However, suspension kinematics are always neglected on these models. Suspension kinematics are defined as wheel movements with respect to the vehicle body. Tire forces are expressed as a function of wheel slip and wheel position. Therefore, the suspension kinematic relation is appended to the 14 DOF vehicle model to investigate its effects on the accuracy of simulate trajectory. Classical 14 DOF vehicle model is chosen as baseline model. Experiment data is collected from formula student style car test runs as baseline data for simulation and comparison between baseline model and model with suspension kinematic. Results show that in a single long turn there is an accumulated trajectory error in baseline model compared to model with suspension kinematic. While in short alternate turns, the trajectory error is much smaller. These results show that suspension kinematic had an effect on the trajectory simulation of vehicle. Which optimal control that use baseline model will result in inaccuracy control scheme.

  6. Evaluating Suspension Formulations of Theophylline Cocrystals With Artificial Sweeteners.

    Science.gov (United States)

    Aitipamula, Srinivasulu; Wong, Annie B H; Kanaujia, Parijat

    2018-02-01

    Pharmaceutical cocrystals have garnered significant interest as potential solids to address issues associated with formulation development of drug substances. However, studies concerning the understanding of formulation behavior of cocrystals are still at the nascent stage. We present results of our attempts to evaluate suspension formulations of cocrystals of an antiasthmatic drug, theophylline, with 2 artificial sweeteners. Stability, solubility, drug release, and taste of the suspension formulations were evaluated. Suspension that contained cocrystal with acesulfame showed higher drug release rate, while a cocrystal with saccharin showed a significant reduction in drug release rate. The cocrystal with saccharin was found stable in suspension for over 9 weeks at accelerated test condition; in contrast, the cocrystal with acesulfame was found unstable. Taste analysis using an electronic taste-sensing system revealed improved sweetness of the suspension formulations with cocrystals. Theophylline has a narrow therapeutic index with a short half-life which necessitates frequent dosing. This adversely impacts patient compliance and enhances risk of gastrointestinal and cardiovascular adverse effects. The greater thermodynamic stability, sweetness, and sustained drug release of the suspension formulation of theophylline-saccharin could offer an alternative solution to the short half-life of theophylline and make it a promising formulation for treating asthmatic pediatric and geriatric patients. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  7. Rheology of dense suspensions of non colloidal particles

    Science.gov (United States)

    Guazzelli, Élisabeth

    2017-06-01

    Dense suspensions are materials with broad applications both in industrial processes (e.g. waste disposal, concrete, drilling muds, metalworking chip transport, and food processing) and in natural phenomena (e.g. flows of slurries, debris, and lava). Despite its long research history and its practical relevance, the mechanics of dense suspensions remain poorly understood. The major difficulty is that the grains interact both by hydrodynamic interactions through the liquid and by mechanical contact. These systems thus belong to an intermediate regime between pure suspensions and granular flows. We show that we can unify suspension and granular rheology under a common framework by transferring the frictional approach of dry granular media to wet suspensions of spherical particles. We also discuss non-Newtonian behavior such as normal-stress differences and shear-induced migration. Beyond the classical problem of dense suspension of hard spheres which is far from being completely resolved, there are also entirely novel avenues of study concerning more complex mixtures of particles and fluids such as those involving other types of particles (e.g. fibers) or non-Newtonian fluids that we will also address.

  8. Rheology of dense suspensions of non colloidal particles

    Directory of Open Access Journals (Sweden)

    Guazzelli Élisabeth

    2017-01-01

    Full Text Available Dense suspensions are materials with broad applications both in industrial processes (e.g. waste disposal, concrete, drilling muds, metalworking chip transport, and food processing and in natural phenomena (e.g. flows of slurries, debris, and lava. Despite its long research history and its practical relevance, the mechanics of dense suspensions remain poorly understood. The major difficulty is that the grains interact both by hydrodynamic interactions through the liquid and by mechanical contact. These systems thus belong to an intermediate regime between pure suspensions and granular flows. We show that we can unify suspension and granular rheology under a common framework by transferring the frictional approach of dry granular media to wet suspensions of spherical particles. We also discuss non-Newtonian behavior such as normal-stress differences and shear-induced migration. Beyond the classical problem of dense suspension of hard spheres which is far from being completely resolved, there are also entirely novel avenues of study concerning more complex mixtures of particles and fluids such as those involving other types of particles (e.g. fibers or non-Newtonian fluids that we will also address.

  9. Robustness analysis of bogie suspension components Pareto optimised values

    Science.gov (United States)

    Mousavi Bideleh, Seyed Milad

    2017-08-01

    Bogie suspension system of high speed trains can significantly affect vehicle performance. Multiobjective optimisation problems are often formulated and solved to find the Pareto optimised values of the suspension components and improve cost efficiency in railway operations from different perspectives. Uncertainties in the design parameters of suspension system can negatively influence the dynamics behaviour of railway vehicles. In this regard, robustness analysis of a bogie dynamics response with respect to uncertainties in the suspension design parameters is considered. A one-car railway vehicle model with 50 degrees of freedom and wear/comfort Pareto optimised values of bogie suspension components is chosen for the analysis. Longitudinal and lateral primary stiffnesses, longitudinal and vertical secondary stiffnesses, as well as yaw damping are considered as five design parameters. The effects of parameter uncertainties on wear, ride comfort, track shift force, stability, and risk of derailment are studied by varying the design parameters around their respective Pareto optimised values according to a lognormal distribution with different coefficient of variations (COVs). The robustness analysis is carried out based on the maximum entropy concept. The multiplicative dimensional reduction method is utilised to simplify the calculation of fractional moments and improve the computational efficiency. The results showed that the dynamics response of the vehicle with wear/comfort Pareto optimised values of bogie suspension is robust against uncertainties in the design parameters and the probability of failure is small for parameter uncertainties with COV up to 0.1.

  10. Development of A New Automotive Active Suspension System

    Science.gov (United States)

    Yousef Abdulhammed, Eng.; Eng. Hisham Elsherif, Dr, Prof.

    2017-12-01

    The main objective was to develop a smart new vehicle suspension system that minimizes the road irregularities impact on the driver, also to increase performance and stability of the vehicle at high speeds. The central idea is based on modifying the normal passive suspension system into a computer controller hydraulic actuated active suspension system simply by adding a new component such as a hydraulic cylinder on a normal passive system. The new suspension system is economical to be wildly used in consumer’s cars with low prices. The new added components was analytically tested and modeled according to different parameters. A new test rig was implemented to simulate a real quarter suspension system. The new suspension model was controlled by feedback controller according to the road conditions; the controller output controls the cylinder actuator to compensate the road oscillations and increases the vehicle stability for the passenger. Finally, to maximize the aerodynamics coefficients of the vehicle during high speeds by controlling the vehicle clearance level from the ground to achieve full stability, steering and fuel economy.

  11. Analysis of Train Suspension System Using MR dampers

    Science.gov (United States)

    RamaSastry, DVA; Ramana, K. V.; Mohan Rao, N.; Siva Kumar, SVR; Priyanka, T. G. L.

    2016-09-01

    This paper deals with introducing MR dampers to the Train Suspension System for improving the ride comfort of the passengers. This type of suspension system comes under Semi-active suspension system which utilizes the properties of MR fluid to damp the vibrations. In case of high speed trains, the coach body is subjected to vibrations due to vertical displacement, yaw and pitch movements. When the body receives these disturbances from the ground,the transmission of vibrations to the passenger increases which affect the ride comfort. In this work, the equations of motion of suspension system are developed for both conventional passive system and semi-active system and are modelled in Matlab/Simulink and analysis has been carried out. The passive suspension system analysis shows that it is taking more time to damp the vibrations and at the same time the transmissibility of vibrations is more.Introducing MR dampers,vertical and angular displacements of the body are computed and compared. The results show that the introduction of MR dampers into the train suspension system improves ride comfort.

  12. Clay-cement suspensions - rheological and functional properties

    Science.gov (United States)

    Wojcik, L.; Izak, P.; Mastalska-Poplawska, J.; Gajek, M.

    2017-01-01

    The piping erosion in soil is highly unexpected in civil engineering. Elimination of such damages is difficult, expensive and time-consuming. One of the possibility is the grouting method. This method is still developed into direction of process automation as well as other useful properties of suspensions. Main way of modernization of the grouting method is connected it with rheology of injection and eventuality of fitting them to specific problems conditions. Very popular and useful became binders based on modified clays (clay-cement suspensions). Important principle of efficiency of the grouting method is using of time-dependent pseudothixotropic properties of the clay-cement suspensions. The pseudo-rheounstability aspect of the suspensions properties should be dedicated and fitted to dynamic changes of soil conditions destructions. Whole process of the modification of the suspension rheology is stimulated by the specific agents. This article contains a description of practical aspects of the rheological parameters managing of the clay-cement suspensions, dedicated to the building damages, hydrotechnic constructions etc.

  13. Hydrologic-agronomic-economic model for the optimal operation of the Yaqui river reservoir system using genetic algorithms; Modelo hidrologico-agronomico-economico para la operacion optima del sistema de presas del rio Yaqui, usando algoritmos geneticos

    Energy Technology Data Exchange (ETDEWEB)

    Minjares-Lugo, Jose Luis; Salmon-Castelo, Roberto Fernando; Oroz-Ramos, Lucas Antonio [Comision Nacional del Agua (Mexico); Cruz-Medina, Isidro Roberto [Instituto Tecnologico de Sonora (Mexico)

    2008-07-15

    The objective of this study is to develop an integrated hydrologic-agronomic-economic annual model for the optimal operation of the Yaqui River reservoir system to support irrigation and urban water supply in the watershed. The model solves for each year's water allocations by crop, maximizing annual agricultural income for a specified risk of reservoir shortages and spills. It accounts for adjustments in water supply arising from changes in precipitation and runoff uncertainty and from changes in water demand arising from variations in crop prices and production costs. Model predictions for the agricultural year 2000-2001 are compared with observed results to test the model's predictive ability. Results demonstrate that the model can be used to optimize and analyze reservoir system operation and for water resources management in the Irrigation District No. 041, providing a framework for improving the operation of a reservoir system, selecting an optimal cropping pattern according to its maximum economic benefits, and in the optimal monthly water releases from the reservoir system. The model considers the simultaneous operation of three dams and it is applied to the Irrigation District No. 041, Rio Yaqui. [Spanish] El objetivo de este estudio es desarrollar un modelo integral de optimizacion anual para definir la operacion del sistema de presas del rio Yaqui y la asignacion del volumen mensual de agua para la irrigacion de diferentes cultivos, asi como para satisfacer los requerimientos de uso urbano basado en las condiciones hidrologicas, agronomicas y economicas en la cuenca. El modelo maximiza los beneficios anuales netos del sector agricola, minimizando el riesgo de deficit o derrames en el sistema de presas; incluye cambios en el suministro de agua debido a la incertidumbre de las precipitaciones y del escurrimiento del rio y cambios en la demanda de agua provocados por la incertidumbre de los precios y costos de los cultivos. Se utilizaron datos del

  14. Ensemble-average versus suspension-scale Cauchy continuum-mechanical definitions of stress in polarized suspensions: Global homogenization of a dilute suspension of dipolar spherical particles

    International Nuclear Information System (INIS)

    Almog, Y.; Brenner, H.

    1999-01-01

    The macroscale rheological properties of a dilute suspension exposed to a uniform external field and composed of identical, rigid, inhomogeneous, dipolar, spherical particles dispersed in an incompressible Newtonian fluid and possessing the same mean density as the latter fluid are derived from knowledge of its microscale properties by applying a global ensemble-averaging technique. Each dipole, which is permanently embedded in the particle, is assumed to be generated by the presence of an inhomogeneous external body-force field in the particle interior resulting from the action of the uniform external field on an inhomogeneous distribution of interior matter. It is shown that although the ensemble-average stress tensor is symmetric, the suspension nevertheless behaves macroscopically as if it possessed an asymmetric stress tensor. This seeming contradiction can be traced to the fact that the average body force acting on the contents of any arbitrarily drawn volume lying in the interior of the suspension does not vanish despite the fact that each particle is 'neutrally buoyant'. That this force is not zero stems from the fact that some particles necessarily straddle the closed surface bounding that volume, and that the distribution of external body forces over the interiors of these particles is nonuniform. As such, that portion of the spherical particle lying outside of the surface enclosing the domain exerts a force on the remaining portion of the sphere lying within that domain. We then demonstrate that the natural macroscopic model, which is derived by equating the divergence of the suspension-scale stress appearing in that model to the ensemble-average external body-force field, and which predicts a symmetric stress tensor, is macroscopically deficient with respect to the more intuitive asymmetric stress model usually proposed by continuum mechanicians for such a suspension. It is shown that the latter, continuum-mechanical model recovers all the physically

  15. 3D modeling design and engineering analysis of automotive suspension beam

    Directory of Open Access Journals (Sweden)

    Ju Zhi Lan

    2016-01-01

    Full Text Available Automotive suspension is an important device for transmission and torque. The main parameters and dimensions of 40 tons of heavy duty truck spring suspension system are designed in the paper. According to the data, the 3D modeling and virtual assembly of the leaf spring suspension are carried out by using parametric design. Structural stress of spring suspension is analyzed which can provide a guide and basis for the design of the leaf spring suspension.

  16. SAM - Sistema Automatizado del Método MECAP para Especificar Casos de Prueba

    Directory of Open Access Journals (Sweden)

    Kenyer Domínguez

    2010-12-01

    Full Text Available Existen cuatro elementos que son relevantes al momento de definir las pruebas: Confiabilidad, Costo, Tiempo y Calidad. El tiempo de desarrollo y el costo del producto se incrementan cuando se desean pruebas confiables y un software de calidad. Pero ¿qué se puede hacer para que los involucrados comprendan que las pruebas deben ser vistas como una red de seguridad? Si la calidad no se contempla antes de comenzar las pruebas, entonces ella no estará cuando se éstas terminen. El objetivo de este artículo es presentar la herramienta, SAM – Sistema Automatizado del Método MECAP que permite especificar Casos de Prueba a partir de Casos de Uso incorporando elementos que promueven la verificación y validación de la trazabilidad entre la Gestión de Requerimientos, el Análisis y Diseño y las Pruebas. SAM soporta el proceso de pruebas de forma automatizada, mejorando la confiabilidad de las mismas

  17. Expansion plan of the electrical sector; Plan de expansion del sector electrico

    Energy Technology Data Exchange (ETDEWEB)

    Cristerna Ocampo, Rafael [Comision Federal de Electricidad (Mexico)

    1996-07-01

    An analysis of the Mexican electrical market in the year 1994 as far as sales of electrical energy and types of users who utilized that energy, is presented. In addition, an analysis is made of the options for the future supply, where the installed electrical capacity in Mexico in 1994 is described. Also the requirements of additional capacity of power generation, from year 1995 to year 2004 are analyzed. In the internal supply of primary energy in Mexico, the hydrocarbons represent 83%, the diversified sources (nuclear, geothermal, hydro and coal) represent 7% and the biomass as well as complementary coal, the 10% balance of the primary energy. Finally an expansion plan of the transmission network of the Mexican electrical system is described. [Spanish] Se presenta un analisis del mercado electrico mexicano en el ano de 1994 en cuanto a ventas de energia electrica y los tipos de usuarios que utilizaron esa energia. Se hace un analisis ademas, de las opciones para la oferta futura, donde se describe la capacidad electrica instalada de Mexico en 1994. Tambien se analizan los requerimientos de capacidad adicional de generacion de 1995 al 2004. En la oferta interna de energia primaria en Mexico, los hidrocarburos representan el 83%, las fuentes diversificadas (nuclear, geotermia, hidro y carboelectrica) representan el 7% y la biomasa asi como el carbon complementario, el 10% restante de la energia primaria. Finalmente se describe un plan de expansion de la red de transmision del sistema electrico mexicano.

  18. Francisco Suárez en la vida de su tiempo y en la del nuestro. Editorial

    Directory of Open Access Journals (Sweden)

    Juana María Gil Ruiz

    2017-09-01

    Full Text Available Con la aparición de este número dedicado —como no puede ser de otro modo— a Francisco Suárez, en la vida de su tiempo y en la del nuestro, con motivo del cuarto centenario de su fallecimiento, ACFS inaugura una nueva etapa —la tercera— que pretende, además de aprovechar este homenaje, afrontar los nuevos retos planteados por la sociedad-economía del conocimiento y sus variados indicadores —formales— de medición de calidad. Es cierto que lo que marca la calidad, al menos la científica, debería sobrepasar cualquier requisito formal, pero más allá de lo que siempre debió y debe ser lo importante, el fondo, las revistas jurídicas han tenido que reinventarse para cumplir con los requerimientos de indexación exigidos por las reconocidas Bases de Datos.

  19. AISLAMIENTO Y PURIFICACIÓN DEL HONGO ECTOMICORRÍZICO Helvella lacunosa EN DIFERENTES MEDIOS DE CULTIVO

    Directory of Open Access Journals (Sweden)

    Daniel Domínguez Romero

    2013-04-01

    Full Text Available Helvella lacunosa (H. lacunosa adicionalmente a su importancia micorrízica tiene un alto valor comercial. La producción comercial de H. lacunosa tiene dos ventajas: Beneficio económico para las comunidades que sean capaces de producirlo y; conservación de la biodiversidad en el bosque al prevenir la sobre explotación de la especie y mantener la relación micorrízica hongo:planta. Es necesario, en principio, obtener el micelio puro (aislamiento, y a partir de éste buscar la técnica de micorrización más adecuada para su producción. El aislamiento de cepas, requiere de pruebas selectivas de diversos medios de cultivo lo que permite identificar los requerimientos potenciales para inducir el desarrollo del micelio. Se realizaron pruebas de crecimiento en cinco medios de cultivo con el objetivo de obtener cepas puras del hongo ectomicorrízico H. lacunosa. Mediante un Análisis de Covarianza se demostró que existe una relación lineal entre el tiempo de incubación y el diámetro, lo que indica que la velocidad de crecimiento acumulado del micelio, fue diferente entre los medios de cultivo (F4, 240 = 17.008; p

  20. El papel del estado y las políticas de acumulación de capital en Colombia

    Directory of Open Access Journals (Sweden)

    Wright Philip

    1981-12-01

    Full Text Available El desarrollo económico colombiano de la postguerra se ha caracterizado por el papel fundamentalmente indicativo que ha jugado el Estado colombiano en la esfera económica, y es quizás en el reciente plan de desarrollo publicado por el gobierno liberal en 1975, donde mejor se resumen y reflejan los límites de dicho papel. La principal función del Estado en el proceso de crecimiento industrial debería ser la de establecer un clima apropiado para la ampliación de las empresas existentes y la creación de nuevas empresas, de forma tal que satisfagan los requerimientos básicos de la población dentro de un contexto de crecimiento social y económico acelerado, contribuyendo decisivamente a la solución del problema del desempleo.El propósito de este artículo es explicar por qué el Estado colombiano ha jugado un papel tan limitado en la esfera económica, lo cual constituye un aspecto de la acumulación de capital en Colombia que está en agudo contraste con la experiencia de un gran número de países
    latinoamericanos.

  1. Il dono del racconto

    DEFF Research Database (Denmark)

    Polito, Paola

    1998-01-01

    L'articolo indaga a vari livelli strutturali del romanzo "Il coraggio del pettirosso" (rete metaforica, dialogismo diegetico, dialogismo come fenomeno di voce, strategie discorsive messe in atto dalla voce narrante, stile colloquiale) la complessa realizzazione testuale del genere narrativo...

  2. Un estudio sobre el desarrollo del pensamiento aleatorio usando recursos educativos abiertos

    Directory of Open Access Journals (Sweden)

    Yenny Patricia Pinzón Triana

    2015-04-01

    Full Text Available Este estudio presenta los resultados de un proyecto de investigación sobre la implementación de la enseñanza probabilística con recursos educativos abiertos (REA, diseñados en la plataforma Edmodo, y que está dirigido a estudiantes de tercer grado de educación básica secundaria de Bogotá, Colombia, y Tuxtepec, México. El fin era evidenciar sus preconceptos, nociones y evaluar el resultado de la instrucción en términos de su pensamiento probabilístico y dar respuesta a la interrogante ¿cuál es el efecto de la instrucción en probabilidad usando Edmodo en estudiantes de tercer grado de educación básica secundaria respecto a la valoración de fenómenos aleatorios de la vida cotidiana, sus conjeturas y la toma de decisiones? Se empleó un enfoque cualitativo a partir del método de estudio de casos, desde el análisis particular a lo general (Stake, 2005. Para la implementación, se consideró el estudio de Fishbein (1975 sobre el desarrollo del pensamiento probabilístico y el de Marzano (2000, relacionado con las dimensiones del aprendizaje. Estos elementos sirvieron para establecer el impacto del uso de los REA, en especial el de la plataforma Edmodo en el desarrollo de competencias en los estudiantes. Los instrumentos consistieron en una prueba de entrada, actividades de apoyo interactivo desde Edmodo y una prueba de salida para determinar los niveles de aprendizaje; mediante triangulación de datos, se evidenciaron alcances de niveles adecuados de desempeño acordes con los requerimientos de los estándares nacionales e internacionales.

  3. Responsabilidad frente al cliente externo como elemento competitivo del sector metalmecánico

    Directory of Open Access Journals (Sweden)

    Juliana Ferrer Soto

    2003-01-01

    Full Text Available El presente artículo aborda una relación entre la responsabilidad y las dimensiones de competitividad expresadas en requerimientos del cliente, información técnica, especificaciones exigidas, asistencia técnica, atención oportuna, entre otros; evidenciando como esta categoría permite fortalecer los cimientos, en el manejo de factores competitivos de las organizaciones, bajo espacios de mercados representados en el estudio, por la empresa metalmecánica zuliana. Siendo una investigación descriptiva, de campo, para el levantamiento de la información se adoptó un muestreo aleatorio estratificado, sobre la base del tamaño de las empresas, utilizando afijación proporcional. La muestra resultó de cuarenta y cinco (45 empresas, de las cuales veintitrés (23 son pequeñas, trece (13 son medianas y nueve (9 son grandes. Del conjunto de resultados, puede inferirse que existe una correlación positiva, dado que en la medida que aumenta el tamaño, aumenta la presencia de dimensiones competitivas, y a la vez se evidencia el cumplimiento del rasgo responsabilidad; presentando así, una correlación significativa global desde el punto de vista estadístico de 0,708. Se concluye, como en la medida en que aumenta el tamaño de la empresa se van generando elementos de confianza y credibilidad resultado de la responsabilidad de la empresa, frente a clientes internos y externos, convirtiendo tal fortaleza en una ventaja competitiva que expresa el posicionamiento en el mercado de consumidores.

  4. Hacia una nueva clasificación de los modelos pedagógicos: el pensamiento configuracional como paradigma científico y educativo del siglo xxi

    Directory of Open Access Journals (Sweden)

    Alexander Ortiz Ocaña

    2013-10-01

    Full Text Available En este trabajo, resultado del proyecto MODEPED: Identificación, caracterización y elaboración del modelo pedagógico de las instituciones educativas públicas del Caribe Colombiano, se hace una nueva clasificación de los modelos pedagógicos en cuatro grande grupos: la pedagogía tradicional (Ignacio Loyola; la escuela nueva (Jhon Dewey, Decroly, Cousinet; la tecnología educativa (B. F. Skinner y la escuela del desarrollo integral (E. Pichón Riviere, P. Freyre, L. S. Vigotsky, A. N. Leontiev, S. L. Rubinstein, A. R. Luria, V. Davidov, I. A. Galperin, L. Zankov, N. Talízina, C. Rogers, Hamachek, A. Maslow, J. Bruner, D. Ausubel, R. Sternberg, J. Piaget, R. Feuerstein, J. de Zubiría, M. de Zubiría. Finalmente, se propone una alternativa emergente, tanto para la investigación científica como para la educación. Se propone el paradigma científico neuroconfiguracional para hacer ciencia humana y social, y un nuevo paradigma educativo para el siglo XXI: el Pensamiento Configuracional (Alexander Ortiz. En este sentido, se define la noción de pensamiento configuracional y se proponen sus bases, sus dimensiones, particularidades, indicadores, estadios, proceso y requerimientos.    

  5. Tribology of swollen starch granule suspensions from maize and potato.

    Science.gov (United States)

    Zhang, Bin; Selway, Nichola; Shelat, Kinnari J; Dhital, Sushil; Stokes, Jason R; Gidley, Michael J

    2017-01-02

    The tribological properties of suspensions of cooked swollen starch granules are characterised for systems based on maize starch and potato starch. These systems are known as granule 'ghosts' due to the release (and removal) of polymer from their structure during cooking. Maize starch ghosts are less swollen than potato starch ghosts, resulting in a higher packing concentration and greater mechanical stability. In a soft-tribological contact, maize ghost suspensions reduce friction compared to the solvent (water), generate bell-shaped tribological profiles characteristic of particle entrainment and show a marked concentration dependence, whereas potato ghost suspensions exhibit lubrication behaviour similar to water. Microscopy analysis of the samples following tribological testing suggests that this is due to the rapid break-up of potato ghosts under the shear and rolling conditions within the tribological contact. A reduction in the small deformation moduli (associated with a weak gel structure) is also observed when the potato ghost suspensions are subjected to steady shear using parallel plate rheometry; both microscopy and particle size analysis show that this is accompanied by the partial shear-induced breakage of ghost particles. This interplay between particle microstructure and the resultant rheological and lubrication dynamics of starch ghost suspensions contributes to an enhanced mechanistic understanding of textural and other functional properties of cooked starches in food and other applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Qualification criteria verification for aisi-4340 steel suspension lug

    International Nuclear Information System (INIS)

    Riaz, M.A.; Alam, M.

    2005-01-01

    All external loads carried underneath an aircraft are mounted onto it through mechanism generally known as suspension system. The externally mounted attachments like bombs, missiles and fuel tanks etc. experience enormous aerodynamic and inertial forces in the flights. These forces are transferred to the interface point of suspension system, known as 'Suspension Lug'. Thus lugs are considered critical component and have extremely stringent qualification criteria standards used in the aviation industry in USA, Europe, Russia, etc. Different standards prevail in different parts of the world about qualification and testing of these lugs. As Pakistan is entering into aviation industry, therefore there is a need to fulfill the requirements of these standards, to suit Pakistani environment. The suspension lug under study is 2000 Ibs. load class made from AISI-4340 Steel having good mechanical properties as per required standard. The manufacturing processes included forging, machining and vacuum heat treatment. The prototypes of suspension lugs were manufactured in the local industry and subjected to the required mechanical tests such as tensile testing at 5 to 35 degree angles. Impact testing at cryogenic temperatures of -50 to -70 degree C, and breaking load testing were performed. The acceptable results were obtained and mechanical testing for qualification of lugs was finalized and standardized. The options were compared with practical viability, utilization of product and cost effectiveness. (author)

  7. Shear-induced changes of electrical conductivity in suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Crawshaw, John; Meeten, Gerald [Schlumberger Cambridge Research, Cambridge (United Kingdom)

    2006-12-15

    The effect of shear on electrical conductivity (rheo-conduction) is studied to give information about particle behaviour in suspensions. Past work is reviewed, and expressions are derived for the rheo-conduction of a suspension of nonconducting spheroids in a conducting matrix for current flow, parallel and normal to the suspension flow direction. A simple apparatus to study rheo-conduction in pipe flow is described, and measurements of steady and time-dependent effects are reported for various suspensions of colloidal particles. Suspensions of anisometric rod- and platelike particles at low concentrations showed rheo-conductive changes of sign, magnitude and relaxation that were consistent with the particle shape, concentration and interactions. The rheo-conductive response decreased with increasing volume fraction for platelike kaolinite particles, attributed to orientational jamming. Spherical latex particles gave unexpected rheo-conductive changes consistent with shear disruption of a conductive network of particles. It is concluded that rheo-conduction measurements are a useful adjunct to conventional rheometry. (orig.)

  8. Development of an Air Pneumatic Suspension System for Transtibial Prostheses

    Directory of Open Access Journals (Sweden)

    Gholamhossein Pirouzi

    2014-09-01

    Full Text Available The suspension system and socket fitting of artificial limbs have major roles and vital effects on the comfort, mobility, and satisfaction of amputees. This paper introduces a new pneumatic suspension system that overcomes the drawbacks of current suspension systems in donning and doffing, change in volume during daily activities, and pressure distribution in the socket-stump interface. An air pneumatic suspension system (APSS for total-contact sockets was designed and developed. Pistoning and pressure distribution in the socket-stump interface were tested for the new APSS. More than 95% of the area between each prosthetic socket and liner was measured using a Tekscan F-Scan pressure measurement which has developed matrix-based pressure sensing systems. The variance in pressure around the stump was 8.76 kPa. APSS exhibits less pressure concentration around the stump, improved pressure distribution, easy donning and doffing, adjustability to remain fitted to the socket during daily activities, and more adaptability to the changes in stump volume. The volume changes were adjusted by utility of air pressure sensor. The vertical displacement point and reliability of suspension were assessed using a photographic method. The optimum pressure in every level of loading weight was 55 kPa, and the maximum displacement was 6 mm when 90 N of weight was loaded.

  9. Multiphase modeling of settling and suspension in anaerobic digester

    International Nuclear Information System (INIS)

    Yu, Liang; Ma, Jingwei; Frear, Craig; Zhao, Quanbao; Dillon, Robert; Li, Xiujin; Chen, Shulin

    2013-01-01

    Highlights: • Develop biowaste fluid dynamics for collision, aggregation and breakup of clusters. • Explore the mechanisms of settling and suspension in anaerobic digester. • Biowaste particles tended to have fluid properties. • Aided with CFD simulation, the scale-up effect was reduced. - Abstract: Effective suspension and settling are critical for controlling biomass retention in a bioreactor. In this paper, a multi-fluid model with kinetic theory of granular flow (KTGF) was established to describe these phenomena in the biowaste particles flow in anaerobic digesters. Solid retention time (SRT) was added as a parameter into anaerobic digestion No.1 (ADM1) model to evaluate its effect on the biogas productivity. The model was experimentally validated in a liquid–gas–solid column reactor with gas and solid volume fraction and granular temperature as the major variables. The wastewater residence time distribution was also determined through modeling and measurement to evaluate the mixing pattern in the pilot column reactor. The effect of restitution coefficient on flow behavior of biowaste particles, particles settling and suspension were predicted. Settling and suspension processes of anaerobic digesters were simulated for lab and pilot-scale reactors with comparisons made for reactor configuration and geometry model, respectively. This study demonstrated that the multi-fluid model with KTGF could provide better understanding of impact of suspension and settling upon retaining biomass particles in the anaerobic digesters

  10. Shear-induced particle migration in suspensions of rods

    Energy Technology Data Exchange (ETDEWEB)

    Mondy, L.A. (Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States)); Brenner, H. (Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)); Altobelli, S.A. (The Lovelace Institutes, 2425 Ridgecrest Drive, S. E., Albuquerque, New Mexico 87108 (United States)); Abbott, J.R.; Graham, A.L. (Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States))

    1994-03-01

    Shear-induced migration of particles occurs in suspensions of neutrally buoyant spheres in Newtonian fluids undergoing shear in the annular space between two rotating, coaxial cylinders (a wide-gap Couette), even when the suspension is in creeping flow. Previous studies have shown that the rate of migration of spherical particles from the high-shear-rate region near the inner (rotating) cylinder to the low-shear-rate region near the outer (stationary) cylinder increases rapidly with increasing sphere size. To determine the effect of particle shape, the migration of rods suspended in Newtonian fluids was recently measured. The behavior of several suspensions was studied. Each suspension contained well-characterized, uniform rods with aspect ratios ranging from 2 to 18 at either 0.30 or 0.40 volume fraction. At the same volume fraction of solids, the steady-state, radial concentration profiles for rods were independent of aspect ratio and were indistinguishable from those obtained from suspended spheres. Only minor differences near the walls (attributable to the finite size of the rods relative to the curvature of the walls) appeared to differentiate the profiles. Data taken during the transition from a well-mixed suspension to the final steady state show that the rate of migration increased as the volume of the individual rods increased.

  11. Viscosity of aqueous and cyanate ester suspensions containing alumina nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Lawler, Katherine [Iowa State Univ., Ames, IA (United States)

    2009-01-01

    The viscosities of both aqueous and cyanate ester monomer (BECy) based suspensions of alumina nanoparticle were studied. The applications for these suspensions are different: aqueous suspensions of alumina nanoparticles are used in the production of technical ceramics made by slip casting or tape casting, and the BECy based suspensions are being developed for use in an injection-type composite repair resin. In the case of aqueous suspensions, it is advantageous to achieve a high solids content with low viscosity in order to produce a high quality product. The addition of a dispersant is useful so that higher solids content suspensions can be used with lower viscosities. For BECy suspensions, the addition of nanoparticles to the BECy resin is expected to enhance the mechanical properties of the cured composite. The addition of saccharides to aqueous suspensions leads to viscosity reduction. Through DSC measurements it was found that the saccharide molecules formed a solution with water and this resulted in lowering the melting temperature of the free water according to classic freezing point depression. Saccharides also lowered the melting temperature of the bound water, but this followed a different rule. The shear thinning and melting behaviors of the suspensions were used to develop a model based on fractal-type agglomeration. It is believed that the structure of the particle flocs in these suspensions changes with the addition of saccharides which leads to the resultant viscosity decrease. The viscosity of the BECy suspensions increased with solids content, and the viscosity increase was greater than predicted by the classical Einstein equation for dilute suspensions. Instead, the Mooney equation fits the viscosity behavior well from 0-20 vol% solids. The viscosity reduction achieved at high particle loadings by the addition of benzoic acid was also investigated by NMR. It appears that the benzoic acid interacts with the surface of the alumina particle which may

  12. Uniform Suspension of the Clustered Triamcinolone Acetonide Particle

    Directory of Open Access Journals (Sweden)

    Masahiko Sugimoto

    2013-01-01

    Full Text Available Purpose. MaQaid (MaQ is a new triamcinolone acetonide commercialised in Japan to visualize the vitreous. Because MaQ is preservative-free, it has a lower risk of ocular toxicities. However, since MaQ is only available as a powder, it needs suspenssion. Suspension does not always result uniformally, which causes poor visibility. This study reports a new MaQ suspension for better visibility. Methods. After medium addition to a MaQ vial, various methods were used. These included the use of (1 vortex mixer, (2 two syringes and a three-way stopcock, and (3 ultrasonic washer. We calculated suspended MaQ concentration (. To evaluate the reproducibility, we estimated the coefficient of variance (CV, . We used this MaQ for pig eyes, and vitreous visualization was simulated. Subsequently, we used this MaQ suspension for humans. Results. MaQ suspensions were sucessfull, and the concentrations of single particles increased significantly (. The CV was 36.1% for the routine method and 9.03% ffor the new method. Administration of a suspended MaQ made it possible to clearly visualize the vitreous in both pig and human eyes. Conclusions. We devised new techniques for uniformal MaQ suspension. These new methods can compensate for the MaQ disadvantages and ensure a safety surgery.

  13. Multivectored Superficial Muscular Aponeurotic System Suspension for Facial Paralysis.

    Science.gov (United States)

    Leach, Garrison; Kurnik, Nicole; Joganic, Jessica; Joganic, Edward

    2017-06-01

    Facial paralysis is a devastating condition that may cause severe cosmetic and functional deformities. In this study we describe our technique for superficial muscular aponeurotic system (SMAS) suspension using barbed suture and compare the vectors of suspension in relation to the underlying musculature. This study also quantifies the improvements in postoperative symmetry using traditional anthropologic landmarks. The efficacy of this procedure for improving facial paralysis was determined by comparing anthropometric indices and using Procrustes distance between 4 groupings of homologous landmarks plotted on each patient's preoperative and postoperative photos. Geometric morphometrics was used to evaluate change in facial shape and improvement in symmetry postoperatively.To analyze the vector of suspension in relation to the underlying musculature, specific anthropologic landmarks were used to calculate the vector of the musculature in 3 facial hemispheres from cadaveric controls against the vector of repair in our patients. Ten patients were included in our study. Subjectively, great improvement in functional status was achieved. Geometric morphometric analysis demonstrated a statistically significant improvement in facial symmetry. Cadaveric dissection demonstrated that the suture should be placed in the SMAS in vectors parallel to the underlying musculature to achieve these results. There were no complications in our study to date. In conclusion, multivectored SMAS suture suspension is an effective method for restoring static suspension of the face after facial paralysis. This method has the benefit of producing quick, reliable results with improved function, low cost, and low morbidity.

  14. Modelos explicativos del cambio en la cobertura del suelo en el crecimiento del uso urbano de la provincia de Santa Elena - Ecuador

    Directory of Open Access Journals (Sweden)

    Dany Salazar

    2016-11-01

    Full Text Available En el año 2009, el gobierno vigente del Ecuador plantea a los gobiernos autónomos descentralizados, los requerimientos de una planificación y ordenamiento en sus respectivos territorios, para que su uso sea sostenible. Por ende, la demanda de insumos de información estadística y geográfica ha sido una prioridad dentro de este ámbito gubernamental. Así tenemos que, la presente contribución investigativa propone brindar insumos de información que de soporte a la planificación y ordenamiento territorial de la Provincia de Santa Elena, Área de Planificación Nº 5 - Ecuador. Siendo uno de los insumos prioritarios la identificación de factores explicativos que inciden en el crecimiento urbano, tales como el biofísico, socioeconómico y de accesibilidad. Para ello se ha seleccionado como unidad de mínima integración de información al pixel y como técnica estadística Regresión Logística. Entre los principales resultados tenemos la implementación de la estandarización, bajo el criterio lineal decreciente para la homogenización de las variables de accesibilidad potenciando al modelo seleccionado y la utilización de herramientas potentes de las Tecnologías de la Información Geográfica, que ha permitido la implementación de modelos con volumen significativo de datos.

  15. El trabajo independiente en el proceso de enseñanza aprendizaje de la Geografía y su Metodología para la preparación metodológica del profesor de Secundaria Básica

    Directory of Open Access Journals (Sweden)

    Mayda Villalón Massó

    2017-11-01

    Full Text Available Se abordan algunos aspectos de la planificación, ejecución y control del trabajo independiente, haciendo énfasis en los esquemas lógicos en la asignatura Geografía y su Metodología. Se aportan algunos aspectos del trabajo independiente en la asignatura para que los futuros docentes puedan desarrollar habilidades, es decir, estudiar y enseñar a estudiar a sus alumnos de manera independiente. Esto permitirá dirigir el trabajo ndependiente hacia las trasformaciones que se operan en la educación Secundaria Básica que exigen la formación de un profesor con una preparación didáctica- metodológica, según los requerimientos que la sociedad exige a la enseñanza y el aprendizaje de la Geografía.

  16. Uso de la programación lineal paramétrica en la solución de un problema de planeación de requerimiento de materiales bajo condiciones de incertidumbre

    OpenAIRE

    Arango Serna, Martin Darío; Serna, Conrado Augusto; Pérez Ortega, Giovanni

    2010-01-01

    El uso de la teoría de los conjuntos difusos como una metodología para el modelado y análisis de sistemas de decisión es de particular interés para investigadores en ingeniería industrial, debido a la capacidad para permitir un análisis cualitativo y cuantitativo de los problemas que implican vaguedad e imprecisión. Es así como, en un esfuerzo por obtener una mejor compresión del uso de la lógica difusa en la ingeniería industrial y más específicamente en el campo de la planificación de la pr...

  17. del cambio

    Directory of Open Access Journals (Sweden)

    Alejandro Canales

    2006-01-01

    Full Text Available El artículo analiza las propuestas y los compromisos en materia de cobertura y de financiamiento en el periodo 2000-2006. En particular, revisa las modificaciones y los ajustes de los tres principales documentos en los que se expresaron las iniciativas: el de la Asociación Nacional de Universidades e Instituciones de Educación Superior, el del equipo de la transición y el programa sectorial. Los resultados muestran que las cifras de atención a la demanda educativa e inversión quedaron lejos de las metas autoimpuestas por el gobierno federal y que será necesario realizar mayores esfuerzos para atender tales desafíos.

  18. Particle-wall tribology of slippery hydrogel particle suspensions.

    Science.gov (United States)

    Shewan, Heather M; Stokes, Jason R; Cloitre, Michel

    2017-03-08

    Slip is an important phenomenon that occurs during the flow of yield stress fluids like soft materials and pastes. Densely packed suspensions of hydrogel microparticles are used to show that slip is governed by the tribological interactions occurring between the samples and shearing surfaces. Both attractive/repulsive interactions between the dispersed particles and surface, as well as the viscoelasticity of the suspension, are found to play key roles in slip occurring within rheometric flows. We specifically discover that for two completely different sets of microgels, the sliding stress at which slip occurs scales with both the modulus of the particles and the bulk suspension modulus. This suggests that hysteresis losses within the viscoelastic particles contribute to friction forces and thus slip at the particle-surface tribo-contact. It is also found that slip during large amplitude oscillatory shear and steady shear flows share the same generic features.

  19. A new variable stiffness suspension system: passive case

    Directory of Open Access Journals (Sweden)

    O. M. Anubi

    2013-02-01

    Full Text Available This paper presents the design, analysis, and experimental validation of the passive case of a variable stiffness suspension system. The central concept is based on a recently designed variable stiffness mechanism. It consists of a horizontal control strut and a vertical strut. The main idea is to vary the load transfer ratio by moving the location of the point of attachment of the vertical strut to the car body. This movement is controlled passively using the horizontal strut. The system is analyzed using an L2-gain analysis based on the concept of energy dissipation. The analyses, simulation, and experimental results show that the variable stiffness suspension achieves better performance than the constant stiffness counterpart. The performance criteria used are; ride comfort, characterized by the car body acceleration, suspension deflection, and road holding, characterized by tire deflection.

  20. Superconducting magnet suspensions in high speed ground transport

    Energy Technology Data Exchange (ETDEWEB)

    Alston, I A

    1973-08-01

    A technical and economic definition of high speed ground transport systems using magnetic suspensions is given. The full range of common superconducting suspensions and of propulsions are covered with designs produced for speeds ranging from 100 m/s (225 miles/hr) to 250 m/s (560 mile/hr). Technical descriptions of the vehicles, their suspensions, propulsions and tracks are given in some detail and operating costs are presented for all the systems together with details of the breakdown of costs and the capital costs involved. The design assumptions, the costing procedure and a cost sensitivity study are presented. It is concluded that the systems are technically feasible; that they are suited to existing duorail track for low speed running and that, in these circumstances, they would be economically viable over many routes.

  1. Characterization and stabilization of suspension of bovine bone ash

    International Nuclear Information System (INIS)

    Carus, L.A.; Bento, L.; Takimi, A.S.; Braganca, S.R.

    2012-01-01

    The bovine bone powder is the main component in the production of bone china, which is known to be one of the finest and most expensive tableware. This special type of porcelain has unique aesthetic characteristics, among which stands out the whiteness, translucency and brightness. The properties of this porcelain, as well as its manufacture, depend on the characteristics of the bone ash. In this study the rheological properties of the suspensions using exclusively bovine bone ash were evaluated by testing the influence of the concentration of solids in suspension, the calcination temperature and the use of dispersing agents. It was found that the powder calcination temperature affects the rheology of the suspension by lowering the viscosity. (author)

  2. Mathematical models for suspension bridges nonlinear structural instability

    CERN Document Server

    Gazzola, Filippo

    2015-01-01

    This work provides a detailed and up-to-the-minute survey of the various stability problems that can affect suspension bridges. In order to deduce some experimental data and rules on the behavior of suspension bridges, a number of historical events are first described, in the course of which several questions concerning their stability naturally arise. The book then surveys conventional mathematical models for suspension bridges and suggests new nonlinear alternatives, which can potentially supply answers to some stability questions. New explanations are also provided, based on the nonlinear structural behavior of bridges. All the models and responses presented in the book employ the theory of differential equations and dynamical systems in the broader sense, demonstrating that methods from nonlinear analysis can allow us to determine the thresholds of instability.

  3. Optical demodulation system for digitally encoded suspension array in fluoroimmunoassay

    Science.gov (United States)

    He, Qinghua; Li, Dongmei; He, Yonghong; Guan, Tian; Zhang, Yilong; Shen, Zhiyuan; Chen, Xuejing; Liu, Siyu; Lu, Bangrong; Ji, Yanhong

    2017-09-01

    A laser-induced breakdown spectroscopy and fluorescence spectroscopy-coupled optical system is reported to demodulate digitally encoded suspension array in fluoroimmunoassay. It takes advantage of the plasma emissions of assembled elemental materials to digitally decode the suspension array, providing a more stable and accurate recognition to target biomolecules. By separating the decoding procedure of suspension array and adsorption quantity calculation of biomolecules into two independent channels, the cross talk between decoding and label signals in traditional methods had been successfully avoided, which promoted the accuracy of both processes and realized more sensitive quantitative detection of target biomolecules. We carried a multiplexed detection of several types of anti-IgG to verify the quantitative analysis performance of the system. A limit of detection of 1.48×10-10 M was achieved, demonstrating the detection sensitivity of the optical demodulation system.

  4. Temperature effects in an optical limiter using carbon nanotube suspensions

    International Nuclear Information System (INIS)

    Yu, Hyojung; Kim, Sokwon

    2005-01-01

    An optical limiter is an optical component that reduces the laser beam intensity for the protection of eyes and light sensors, and a carbon nanotube is known to be a highly efficient optical limiting material. However, the effects of heat generated by continuous use have not been studied yet. Therefore, in this work, the variation of optical limiting effect of multi-walled carbon-nanotube suspensions in several kinds of solvents such as distilled water, chloroform, ethanol and ethylene glycol, were measured in the temperature range from room temperature to the boiling point of each solvent. A pulsed Nd : YAG laser with a wavelength of 1064 nm and a pulse duration of 6 ns was used as the light source. The experimental result shows that the limiting efficiencies of all the suspensions were reduced as the temperature was increased and that a suspension with a solvent of lower boiling point, viscosity, and surface tension showed a higher efficiency.

  5. Relation between rheological and structural properties of suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Barcal, M; Sebor, G; Volsicky, Z

    1982-01-01

    The paper discusses results of investigations into separation processes for coal and kaolin suspensions. Effects of potassium chlorides and methanol additives on electrostatic potential of solid particles and on sedimentation rate are analyzed. Investigation results are shown in 5 diagrams. The relation between rheological and structural properties of coal and clay suspensions is investigated. Investigations show that the non-Newtonian behavior of suspensions cannot be attributed exclusively to the electrostatic and mechanical action of the solid phase particles. It is also caused by structure of the liquid phase, particularly on the surface of the solid particles, which depends mostly on hydrogen bonds. The internal structure of the liquid phase influences differential viscosity much more than the electrical surface properties of the solid phase. Bonds between the molecules of water and methanol are much stronger than bonds between water molecules alone. (9 refs.)

  6. Stability of an extemporaneously compounded minoxidil oral suspension.

    Science.gov (United States)

    Song, Yunmei; Chin, Zen Whey; Ellis, David; Lwin, Ei Mon Phyo; Turner, Sean; Williams, Desmond; Garg, Sanjay

    2018-03-01

    Results of a study to determine the stability of an extemporaneously compounded minoxidil oral suspension under various temperature and stress conditions are reported. Commercially available minoxidil tablets (10 mg) were crushed to a fine powder, and predetermined amounts of 2 suspending vehicles were added to produce a 1-mg/mL suspension, which was stored in glass bottles at room temperature (25 ± 2 °C) or in a refrigerator (4 ± 2 °C). To simulate daily patient use, 5 days weekly 1 bottle of the suspension was removed from refrigerated storage and shaken and 0.5 mL of the contents discarded. At each specified time point, samples were analyzed in duplicate ( n = 6 for each test condition) using a validated high-performance liquid chromatography method. Samples were visually observed and their pH measured at each time point. Microbiological studies were performed on day 0 and at week 24. The mean percentage of initial minoxidil concentration remaining in all refrigerated samples exceeded 90% throughout the 24-week study, with no change in appearance, pH, microbial activity, odor, or redispersibility. During storage at room temperature, the suspension exhibited a color change at week 4, with slight sedimentation after 6 weeks, although minoxidil recovery exceeded 90% for 10 weeks. An extemporaneously compounded minoxidil oral suspension was stable for 24 weeks when stored in a refrigerator. This suspension can be used for up to 3 weeks when stored at room temperature. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  7. Interaction and rheology of vesicle suspensions in confined shear flow

    Science.gov (United States)

    Shen, Zaiyi; Farutin, Alexander; Thiébaud, Marine; Misbah, Chaouqi

    2017-10-01

    Dynamics and rheology of a confined suspension of vesicles (a model for red blood cells) are studied numerically in two dimensions by using an immersed boundary lattice Boltzmann method. We pay particular attention to the link between the spatiotemporal organization and the rheology of the suspension. Besides confinement, we analyze the effect of concentration of the suspension, ϕ (defined as the area fraction occupied by the vesicles in the simulation domain), as well as the viscosity contrast λ (defined as the ratio between the viscosity of the fluid inside the vesicles, ηint, and that of the suspending fluid, ηext). The hydrodynamic interaction between two vesicles is shown to play a key role in determining the spatial organization. For λ =1 , the pair of vesicles settles into an equilibrium state with constant interdistance, which is regulated by the confinement. The equilibrium interdistance increases with the gap between walls, following a linear relationship. However, no stable equilibrium interdistance between two tumbling vesicles is observed for λ =10 . A quite ordered suspension is observed concomitant with the existence of an equilibrium interdistance between a vesicle pair. However, a disordered suspension prevails when no pair equilibrium interdistance exists, as occurs for tumbling vesicles. We then analyze the rheology, focusing on the effective viscosity, denoted as η , as well as on normalized viscosity, defined as [η ] =(η -ηext) /(ηextϕ ) . Ordering of the suspension is accompanied by a nonmonotonic behavior of [η ] with ϕ , while η exhibits plateaus. The nonmonotonic behavior of [η ] is suppressed when a disordered pattern prevails.

  8. Discontinuous Shear Thickening and Dilatancy: Frictional Effects in Viscous Suspensions

    Science.gov (United States)

    Morris, Jeffrey

    2015-03-01

    Shear thickening in concentrated suspensions has been well-known for quite a long time, yet a firm consensus on the basis for very abrupt or ``discontinuous'' shear thickening (DST) seen in suspensions of large solid fraction, ϕ, has not been reached. This work addresses the DST phenomenon, and proposes a simulation method based in the Stokesian Dynamics algorithm to explore the role of various forces between the particles, including hydrodynamic, conservative potential, and frictional interactions. This work shows that allowance for friction between spherical particles suspended in a viscous liquid causes a significant reduction in the jamming solid fraction of the mixture, ϕmax, taken as the maximum fraction at which the suspension will flow. A consequence of this is a shifting of the singularity in the effective viscosity, η, to smaller ϕmax, and the frictional suspension has a larger viscosity than does the frictionless suspension of the same solid fraction, as is clear from the standard empirical modeling of η (ϕ) =(1 - ϕ /ϕmax) - α , α ~ 2 . When a counterbalancing repulsive force between the particles, representative for example of charge-induced repulsion, is incorporated in the dynamics, the mixture undergoes a transition from frictionless to frictional interactions, and from low to high effective viscosity, at a critical shear rate. Comparison with experimental data shows remarkable agreement in the features of DST captured by the method. The basic algorithm and results of both rate-controlled and stress-controlled simulations will be presented. Like the shear stress, the magnitude of the normal stress exerted by the suspended particles also increases abruptly at the critical shear rate, consistent with the long-standing notion that dilatancy and shear-thickening are synonymous. We will show that considering all shear thickening materials as dilatant is a misconception, but demonstrate the validity of the connection of dilatancy with DST in

  9. Model-assisted measurements of suspension-feeding flow velocities.

    Science.gov (United States)

    Du Clos, Kevin T; Jones, Ian T; Carrier, Tyler J; Brady, Damian C; Jumars, Peter A

    2017-06-01

    Benthic marine suspension feeders provide an important link between benthic and pelagic ecosystems. The strength of this link is determined by suspension-feeding rates. Many studies have measured suspension-feeding rates using indirect clearance-rate methods, which are based on the depletion of suspended particles. Direct methods that measure the flow of water itself are less common, but they can be more broadly applied because, unlike indirect methods, direct methods are not affected by properties of the cleared particles. We present pumping rates for three species of suspension feeders, the clams Mya arenaria and Mercenaria mercenaria and the tunicate Ciona intestinalis , measured using a direct method based on particle image velocimetry (PIV). Past uses of PIV in suspension-feeding studies have been limited by strong laser reflections that interfere with velocity measurements proximate to the siphon. We used a new approach based on fitting PIV-based velocity profile measurements to theoretical profiles from computational fluid dynamic (CFD) models, which allowed us to calculate inhalant siphon Reynolds numbers ( Re ). We used these inhalant Re and measurements of siphon diameters to calculate exhalant Re , pumping rates, and mean inlet and outlet velocities. For the three species studied, inhalant Re ranged from 8 to 520, and exhalant Re ranged from 15 to 1073. Volumetric pumping rates ranged from 1.7 to 7.4 l h -1 for M . arenaria , 0.3 to 3.6 l h -1 for M . m ercenaria and 0.07 to 0.97 l h -1 for C . intestinalis We also used CFD models based on measured pumping rates to calculate capture regions, which reveal the spatial extent of pumped water. Combining PIV data with CFD models may be a valuable approach for future suspension-feeding studies. © 2017. Published by The Company of Biologists Ltd.

  10. Suspension Bridge Flutter for Girder with Separate Control Flaps

    DEFF Research Database (Denmark)

    Huynh, T.; Thoft-Christensen, Palle

    Active vibration control of long span suspension bridge flutter using separated control flaps (SFSC) has shown to increase effectively the critical wind speed of bridges. In this paper, an SFSC calculation based on modal equations of the vertical and torsional motions of the bridge girder including...... the flaps is presented. The length of the flaps attached to the girder, the flap configuration and the flap rotational angles are parameters used to increase the critical wind speed of the bridge. To illustrate the theory a numerical example is shown for a suspension bridge of 1000m+2500m+1000m span based...... on the Great Belt Bridge streamlined girder....

  11. Optimization of Front Axle Suspension System of Articulated Dump Truck

    DEFF Research Database (Denmark)

    Langer, Thomas Heegaard; Christensen, Brian B.; Mouritsen, Ole Ø.

    2010-01-01

    that has been subjected to comfort improvement is a two axle articulated dump truck. The comfort has been in terms of whole body vibration exposure and the overall improvement has been made possible by adding front axle suspension. However, a hydraulic stabilizing system between the tractor and trailer...... to evaluate the whole body vibrations. By use of a multibody simulation model of the dump truck the whole body vibration exposure has been computed using the predefined work cycle as model input. The design parameters comprise the components of the hydraulic subsystem of the suspension, i.e., the size...

  12. Honig v. Doe: the suspension and expulsion of handicapped students.

    Science.gov (United States)

    Yell, M L

    1989-09-01

    Public Law 94-142 provides for a free appropriate public education for all handicapped children, but does not address the issue of disciplining handicapped students. The result has been confusion and uncertainty, particularly concerning expulsion and suspension. The courts have been forced into this vacuum, acting as arbiters. The Supreme Court's ruling in Honig v. Doe will help to delineate the proper role of educators in the suspension and expulsion of handicapped students. This article examines that role and offers recommendations for school policies regarding the discipline of handicapped students.

  13. A magnetic suspension system for measuring liquid density

    Directory of Open Access Journals (Sweden)

    Luz María Centeno González

    2013-01-01

    Full Text Available Density is a derived quantity of mass and length; it is defined as mass per volume unit and its SI unit is kg/m3. National metrology institutes have been designing and building their own magnetic suspension systems during the last 5 decades for making fluid density measurements; this has allowed them to carry out research into liquids and gases’ physical characteristics. This paper was aimed at designing and developing a magnetic suspension system for a magnetic balance used in determining liquid density to be used in CENAM’s metrology density laboratories.

  14. Evaluating damping elements for two-stage suspension vehicles

    Directory of Open Access Journals (Sweden)

    Ronald M. Martinod R.

    2012-01-01

    Full Text Available The technical state of the damping elements for a vehicle having two-stage suspension was evaluated by using numerical models based on the multi-body system theory; a set of virtual tests used the eigenproblem mathematical method. A test was developed based on experimental modal analysis (EMA applied to a physical system as the basis for validating the numerical models. The study focused on evaluating vehicle dynamics to determine the influence of the dampers’ technical state in each suspension state.

  15. Hydrodynamic suppression of phase separation in active suspensions.

    Science.gov (United States)

    Matas-Navarro, Ricard; Golestanian, Ramin; Liverpool, Tanniemola B; Fielding, Suzanne M

    2014-09-01

    We simulate with hydrodynamics a suspension of active disks squirming through a Newtonian fluid. We explore numerically the full range of squirmer area fractions from dilute to close packed and show that "motility induced phase separation," which was recently proposed to arise generically in active matter, and which has been seen in simulations of active Brownian disks, is strongly suppressed by hydrodynamic interactions. We give an argument for why this should be the case and support it with counterpart simulations of active Brownian disks in a parameter regime that provides a closer counterpart to hydrodynamic suspensions than in previous studies.

  16. Effective viscosity of 2D suspensions - Confinement effects

    OpenAIRE

    Doyeux , Vincent; Priem , Stephane; Jibuti , Levan; Farutin , Alexander; Ismail , Mourad; Peyla , Philippe

    2016-01-01

    International audience; We study the rheology of a sheared 2D suspension of non-Brownian disks in presence of walls. Although, it is of course possible today with modern computers and powerful algorithms to perform direct numerical simulations that fully account for multiparticle 3D interactions in the presence of walls, the analysis of the simple case of a 2D suspension, provides valuable insights and helps to understand 3D results. Thanks to the direct visualization of the whole 2D flow (th...

  17. Chlorogenic acid in a Nicotiana plumbaginifolia cell suspension.

    Science.gov (United States)

    Gillet; Mesnard; Fliniaux; Monti; Fliniaux

    1999-11-01

    A phenylpropanoid compound has been characterized in a Nicotiana plumbaginifolia cell suspension. This compound has been isolated and purified by semi-preparative reverse phase-high performance liquid chromatography. Its structure has been identified by NMR spectroscopy as 5-O-caffeoylquinic acid, which is chlorogenic acid (CA). The influence of culture conditions on the accumulation of this metabolite by N. plumbaginifolia cell suspensions has been studied. Darkness strongly inhibits the CA accumulation. Moreover, it has been shown that feeding experiments with caffeic acid had a deleterious effect upon the CA content. This one was not influenced by a supplementation with quinic acid.

  18. Mesoscopic Length Scale Controls the Rheology of Dense Suspensions

    Science.gov (United States)

    Bonnoit, Claire; Lanuza, Jose; Lindner, Anke; Clement, Eric

    2010-09-01

    From the flow properties of dense granular suspensions on an inclined plane, we identify a mesoscopic length scale strongly increasing with volume fraction. When the flowing layer height is larger than this length scale, a diverging Newtonian viscosity is determined. However, when the flowing layer height drops below this scale, we evidence a nonlocal effective viscosity, decreasing as a power law of the flow height. We establish a scaling relation between this mesoscopic length scale and the suspension viscosity. These results support recent theoretical and numerical results implying collective and clustered granular motion when the jamming point is approached from below.

  19. Axial dispersion via shear-enhanced diffusion in colloidal suspensions

    KAUST Repository

    Griffiths, I. M.

    2012-03-01

    The familiar example of Taylor dispersion of molecular solutes is extended to describe colloidal suspensions, where the fluctuations that contribute to dispersion arise from hydrodynamic interactions. The generic scheme is illustrated for a suspension of particles in a pressure-driven pipe flow, with a concentration-dependent diffusivity that captures both the shear-induced and Brownian contributions. The effect of the cross-stream migration via shear-induced diffusion is shown to dramatically reduce the axial dispersion predicted by classical Taylor dispersion for a molecular solute. Analytic and numerical solutions are presented that illustrate the effect of the concentration dependence of this nonlinear hydrodynamic mechanism. Copyright © EPLA, 2012.

  20. Mixing and solid suspension in a stirred precipitator

    International Nuclear Information System (INIS)

    Chang, T.P.

    1986-04-01

    Full-scale mixing and solid suspension studies have been conducted to determine the optimum agitator design for precipitators used in plutonium processing. Design considerations include the geometry of precipitator vessels, feed locations, flow patterns, and product requirements. Evaluations of various agitator designs are based on their capabilities: (1) to achieve uniform mixing of reactants in minimum time, (2) to suspend slurry uniformly throughout the vessel, and (3) to minimize power consumption without inducing air entrainment. Tests of full-scale agitator designs showed that significant improvements in mixing, solid suspension, and energy consumption were achieved

  1. A Study of the Creep Effect in Loudspeaker Suspension

    DEFF Research Database (Denmark)

    Agerkvist, Finn T.; Thorborg, Knud; Tinggaard, Carsten

    2008-01-01

    This paper investigates the creep effect, the visco elastic behaviour of loudspeaker suspension parts, which can be observed as an increase in displacement far below the resonance frequency. The creep effect means that the suspension cannot be modelled as a simple spring. The need for an accurate...... creep model is even larger as the validity of loudspeaker models are now sought extended far into the nonlinear domain of the loudspeaker. Different creep models are investigated and implemented both in simple lumped parameter models as well as time domain non-linear models, the simulation results...

  2. La superaci??n del modelo del ??ngel del hogar:

    OpenAIRE

    Hurtado Mu??oz, M??nica

    2012-01-01

    La Tesis Doctoral titulada "La superaci??n del modelo del "??ngel del hogar". Recuperaci??n de la escritora Leonor Canalejas y Fustegueras (1869-1945)" aborda, en primer lugar, un an??lisis sociol??gico de las circunstancias que rodearon a la mujer espa??ola en el cambio de siglo en el ??mbito social y educativo, en un intento de esclarecer las caracter??sticas propias del contexto en el que la mujer accede a la intelectualidad en general y a la literatura en particular. Esta parte concluye q...

  3. Graphite suspension in carbon dioxide; Suspension de graphite dans le gaz carbonique

    Energy Technology Data Exchange (ETDEWEB)

    Roche, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Moussez, C; Rouvillois, X; Brevet, R [Societe Nationale d' Etude et de Construction de Moteurs d' Aviation (SNECMA), 75 - Paris (France)

    1965-07-01

    Since 1963 the Atomic Division of SNECMA has been conducting, under a contract with the CEA, an experimental work with a two-component fluid comprised of carbon dioxide and small graphite particles. The primary purpose was the determination of basic engineering information pertaining to the stability and the flowability of the suspension. The final form of the experimental loop consists mainly of the following items: a light-phase compressor, a heavy-phase pump, an electrical-resistance type heater section, a cooling heat exchanger, a hairpin loop, a transparent test section and a separator. During the course of the testing, it was observed that the fluid could be circulated quite easily in a broad range of variation of the suspension density and velocity - density from 30 to 170 kg/m{sup 3} and velocity from 2 to 24 m/s. The system could be restarted and circulation maintained without any difficulty, even with the heavy-phase pump alone. The graphite did not have a tendency to pack or agglomerate during operation. No graphite deposition was observed on the wall of the tubing. A long period run (250 hours) has shown the evolution of the particle dimensions. Starting with graphite of surface area around 20 m{sup 2}/g (graphite particles about 1 {mu}), the powder surface area reaches an asymptotic value of 300 m{sup 2}/g (all the particles less than 0.3 {mu}). Moisture effect on flow stability, flow distribution between two parallel channels, pressure drop in straight tubes, recompression ratio in diffusers were also investigated. (author) [French] Depuis 1963 la Division Atomique de la SNECMA conduit, dans le cadre d'un contrat avec le Commissariat A l'Energie Atomique, l'etude experimentale d'une suspension de fines particules de graphite dans le gaz carbonique. L'objectif principal est d'obtenir des informations d'ordre mecanique et technologique sur la mise en oeuvre de l'ecoulement de ce fluide diphase. Le circuit experimental comprend principalement: un

  4. Suspension of the NAB Code and Its Effect on Regulation of Advertising.

    Science.gov (United States)

    Maddox, Lynda M.; Zanot, Eric J.

    1984-01-01

    Traces events leading to the suspension of the Television Code of the National Association of Broadcasters in 1982 and looks at changes that have occurred in the informal and formal regulation of advertising as a result of that suspension. (FL)

  5. 5 CFR 919.610 - What procedures does the OPM use in suspension and debarment actions?

    Science.gov (United States)

    2010-01-01

    ... handle the actions as informally as practicable, consistent with principles of fundamental fairness. (a... MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) General Principles Relating to Suspension and Debarment Actions § 919.610 What procedures does...

  6. 17 CFR 201.550 - Summary suspensions pursuant to Exchange Act Section 12(k)(1)(A).

    Science.gov (United States)

    2010-04-01

    ... termination of suspension. Any person adversely affected by a suspension pursuant to Section 12(k)(1)(A) of... the public interest or for the protection of investors may file a sworn petition with the Secretary...

  7. Design and analysis of an intelligent controller for active geometry suspension systems

    Science.gov (United States)

    Goodarzi, Avesta; Oloomi, Ehsan; Esmailzadeh, Ebrahim

    2011-02-01

    An active geometry suspension (AGS) system is a device to optimise suspension-related factors such as toe angle and roll centre height by controlling vehicle's suspension geometry. The suspension geometry could be changed through control of suspension mounting point's position. In this paper, analysis and control of an AGS system is addressed. First, the effects of suspension geometry change on roll centre height and toe angle are studied. Then, based on an analytical approach, the improvement of the vehicle's stability and handling due to the control of suspension geometry is investigated. In the next section, an eight-degree-of-freedom handling model of a sport utility vehicle equipped with an AGS system is introduced. Finally, a self-tuning proportional-integral controller has been designed, using the fuzzy control theory, to control the actuator that changes the geometry of the suspension system. The simulation results show that an AGS system can improve the handling and stability of the vehicle.

  8. Simultaneous determination of Albendazol and Triclabendazol in Triclazol 22 suspension for veterinary purposes

    International Nuclear Information System (INIS)

    Garcia Penna, Caridad M.; Gafas Leyva, Maite; Rosales Bosch, Karina

    2013-01-01

    Triclazol 22 suspension containing triclabendazol and albendazol is used as parasiticide for veterinary purposes. to validate the analytical method for simultaneous determination of triclabendazol and albendazol in triclazol 22 suspension for quality control

  9. Gastrointestinal tract wall visualization and distention during abdominal and pelvic multidetector CT with a neutral barium sulphate suspension: comparison with positive barium sulphate suspension and with water.

    Science.gov (United States)

    Oliva, M R; Erturk, S M; Ichikawa, T; Rocha, T; Ros, P R; Silverman, S G; Mortele, K J

    2012-01-01

    When examining patients with contrast-enhanced multidetector-row CT, we determined if the stomach and small bowel were visualized and distended better with a neutral barium sulphate suspension than with positive barium sulphate suspension or water. After obtaining approval from our institutional review board, 156 patients (women: 84; mean age: 54 yrs) with no history of gastrointestinal tract disease were randomized prospectively to receive orally either 900 ml of neutral (0.1% w/v) barium sulphate suspension (n = 53), 900 ml of positive (2.1% w/v) barium sulphate suspension (n = 53), or 900 ml of water (n = 50), prior to undergoing contrast-enhanced abdominal and pelvic multidetector-row CT. Two independent radiologists evaluated the stomach, and small bowel, for luminal distension and wall visualization, using a five point scale. Results were compared using Kruskal-Wallis and Mann-Whitney U tests. The walls of the stomach, and small bowel were visualized better in patients who were administered neutral barium sulphate suspension than those who were administered either positive barium sulphate suspension (p barium sulphate suspension, the stomach and small bowel were distended better compared to patients administered water (p barium sulphate suspension (p contrast-enhanced abdominal and pelvic multidetector-row CT, orally administered neutral barium sulphate suspension allows the gastrointestinal tract to be visualized and distended better than either positive barium sulphate suspension, or water.

  10. El Convenio de La Haya de 1980 sobre aspectos civiles de la sustracción internacional de menores y su aplicación en Chile: las modalidades de restitución del menor

    Directory of Open Access Journals (Sweden)

    Lucía Rizik Mulet

    2014-12-01

    Full Text Available Para garantizar la restitución de las niñas y niños menores de 16 años que han sido objeto de sustracción internacional con la mayor celeridad posible, el Convenio de La Haya sobre aspectos civiles de la sustracción internacional de menores de 1980 establece tres modalidades o formas para concretar dicho retorno. El presente trabajo analiza estas modalidades, con el fin de resaltar la importancia de ajustar las actuaciones judiciales y administrativas a los requerimientos del Convenio de La Haya sobre aspectos civiles de la sustracción internacional de menores de 1980 y de realizar las modificaciones legales pertinentes para su adecuada implementación.

  11. MEMS mass-spring-damper systems using an out-of-plane suspension scheme

    KAUST Repository

    Abdel Aziz, Ahmed Kamal Said; Sharaf, Abdel Hameed; Serry, Mohamed Yousef; Sedky, Sherif Salah

    2014-01-01

    MEMS mass-spring-damper systems (including MEMS gyroscopes and accelerometers) using an out-of-plane (or vertical) suspension scheme, wherein the suspensions are normal to the proof mass, are disclosed. Such out-of-plane suspension scheme helps such MEMS mass-spring-damper systems achieve inertial grade performance. Methods of fabricating out-of-plane suspensions in MEMS mass-spring-damper systems (including MEMS gyroscopes and accelerometers) are also disclosed.

  12. MEMS mass-spring-damper systems using an out-of-plane suspension scheme

    KAUST Repository

    Abdel Aziz, Ahmed Kamal Said

    2014-02-04

    MEMS mass-spring-damper systems (including MEMS gyroscopes and accelerometers) using an out-of-plane (or vertical) suspension scheme, wherein the suspensions are normal to the proof mass, are disclosed. Such out-of-plane suspension scheme helps such MEMS mass-spring-damper systems achieve inertial grade performance. Methods of fabricating out-of-plane suspensions in MEMS mass-spring-damper systems (including MEMS gyroscopes and accelerometers) are also disclosed.

  13. Equivalent Air Spring Suspension Model for Quarter-Passive Model of Passenger Vehicles

    OpenAIRE

    Abid, Haider J.; Chen, Jie; Nassar, Ameen A.

    2015-01-01

    This paper investigates the GENSIS air spring suspension system equivalence to a passive suspension system. The SIMULINK simulation together with the OptiY optimization is used to obtain the air spring suspension model equivalent to passive suspension system, where the car body response difference from both systems with the same road profile inputs is used as the objective function for optimization (OptiY program). The parameters of air spring system such as initial pressure, volume of bag, l...

  14. Effect of vibration versus suspension therapy on balance in children ...

    African Journals Online (AJOL)

    Most cerebral palsy children have deficits in balance, co-ordination, and gait throughout childhood and adulthood. So, it is essential to seek an ideal physical therapy program to help in solving such widespread problem. The present study was conducted to compare between the effect of vibration training and suspension ...

  15. 12 CFR 263.403 - Automatic removal, suspension, and debarment.

    Science.gov (United States)

    2010-01-01

    ... independent public accountant or accounting firm may not perform audit services for banking organizations if... permission to such accountant or firm to perform audit services for banking organizations. The request shall... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Automatic removal, suspension, and debarment...

  16. 12 CFR 308.603 - Automatic removal, suspension, and debarment.

    Science.gov (United States)

    2010-01-01

    ... audit services for insured depository institutions for which the FDIC is the appropriate Federal banking... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Automatic removal, suspension, and debarment. 308.603 Section 308.603 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF...

  17. 12 CFR 263.402 - Removal, suspension, or debarment.

    Science.gov (United States)

    2010-01-01

    ... accountant from performing audit services for banking organizations that are subject to section 36 of the..., immediately suspend such accountant or firm from performing audit services for banking organizations, if the... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Removal, suspension, or debarment. 263.402...

  18. 12 CFR 308.602 - Removal, suspension, or debarment.

    Science.gov (United States)

    2010-01-01

    ... for which the FDIC is the appropriate Federal banking agency if, after service of a notice of... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Removal, suspension, or debarment. 308.602 Section 308.602 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE...

  19. Self-Suspended Suspensions of Covalently Grafted Hairy Nanoparticles

    KAUST Repository

    Choudhury, Snehashis

    2015-03-17

    © 2015 American Chemical Society. Dispersions of small particles in liquids have been studied continuously for almost two centuries for their ability to simultaneously advance understanding of physical properties of fluids and their widespread use in applications. In both settings, the suspending (liquid) and suspended (solid) phases are normally distinct and uncoupled on long length and time scales. In this study, we report on the synthesis and physical properties of a novel family of covalently grafted nanoparticles that exist as self-suspended suspensions with high particle loadings. In such suspensions, we find that the grafted polymer chains exhibit unusual multiscale structural transitions and enhanced conformational stability on subnanometer and nanometer length scales. On mesoscopic length scales, the suspensions display exceptional homogeneity and colloidal stability. We attribute this feature to steric repulsions between grafted chains and the space-filling constraint on the tethered chains in the single-component self-suspended materials, which inhibits phase segregation. On macroscopic length scales, the suspensions exist as neat fluids that exhibit soft glassy rheology and, counterintuitively, enhanced elasticity with increasing temperature. This feature is discussed in terms of increased interpenetration of the grafted chains and jamming of the nanoparticles. (Chemical Presented).

  20. 20 CFR 404.525 - Suspension of offset.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Suspension of offset. 404.525 Section 404.525 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950....521, the overpaid individual notifies us that he or she is exercising a right described in § 404.522(a...

  1. 19 CFR 122.187 - Revocation or suspension of access.

    Science.gov (United States)

    2010-04-01

    ... believe that an approved Customs access seal was obtained through fraud, a material omission, or the misstatement of a material fact; (ii) The employee is or has been convicted of, or found not guilty of by... demonstrate that there is a genuine issue of fact that is material to the revocation or suspension action. (2...

  2. Electrohydrodynamics of suspension of liquid drops in AC fields

    Science.gov (United States)

    Abdul Halim, Md.; Esmaeeli, Asghar

    2012-11-01

    Manipulation of liquid drops by an externally applied electric field is currently the focus of increased attention because of its relevance in a broad range of industrial processes. The effect of a uniform DC electric field on a solitary drop is well studied; however, less is know about the impact of electric field on suspension of liquid drops, and very little information is available on the impact of AC field on a single or a suspension of drops. Here we report the results of Direct Numerical Simulations of electrohydrodynamics of suspension of liquid drops. The governing equations are solved using a front tracking/finite difference technique, in conjunction with Taylor's leaky dielectric model. The imposed electric potential comprises of two parts, a time-independent base and a time-dependent part. The goal is to explore the relative importance of these two components in setting the statistically steady state behavior of the suspension. To this end, we report the results of three sets of simulations, where (i) the time-dependent part act as a perturbation on the base potential, (ii) the two components are of the same order, and (iii) the time-dependent part is much larger than the base potential. The problem is studied as a function of the governing nondimensional parameters.

  3. Electrorheology of aniline-oligomer suspensions under oscillatory shear

    Czech Academy of Sciences Publication Activity Database

    Mrlík, M.; Pavlínek, V.; Almajdalawi, S.; Saha, P.; Bober, Patrycja; Stejskal, Jaroslav

    2013-01-01

    Roč. 412, č. 1 (2013), 012007_1-012007_6 ISSN 1742-6588. [International Conference on Electrorheological Fluids and Magnetorheological Suspensions /13./ - ERMR2012. Ankara, 02.07.2012-06.07.2012] R&D Projects: GA ČR GA202/09/1626 Institutional support: RVO:61389013 Keywords : electrorheology * polyaniline * conducting polymer Subject RIV: BK - Fluid Dynamics

  4. Observation of antioxidant activity of leaves, callus and suspension ...

    African Journals Online (AJOL)

    GREGORY

    2011-12-16

    Dec 16, 2011 ... Antioxidant activity and phenolic compound was found in Justicia gendarussa via total phenolic content (TPC) and α,α-diphenyl-β-pycrilhydrazil hydrate (DPPH) radical scavenging assays. The assays were applied on aqueous and methanolic extracts of leaves, callus culture and cell suspension culture.

  5. Voltammetry of metallic powder suspensions on mercury electrodes

    Czech Academy of Sciences Publication Activity Database

    Korshunov, A.; Heyrovský, Michael

    2006-01-01

    Roč. 18, č. 4 (2006), s. 423-426 ISSN 1040-0397 R&D Projects: GA MPO 1H-PK/42 Institutional research plan: CEZ:AV0Z40400503 Keywords : metallic particles * oxide layers * suspensions * mercury electrodes * particulate electrolysis Subject RIV: CG - Electrochemistry Impact factor: 2.444, year: 2006

  6. Pattern formation by dewetting and evaporating sedimenting suspensions

    NARCIS (Netherlands)

    Habibi, M.; Moller, P.; Fall, A.; Rafaï, S.; Bonn, D.

    2012-01-01

    Pattern formation from drying droplets containing sedimenting particles and dewetting of thin films of such suspensions was studied. The dewetting causes the formation of finger-like patterns near the contact line which leave behind a deposit of branches. We find that the strikingly low speed of

  7. Mechanics of dense suspensions in turbulent channel flows

    NARCIS (Netherlands)

    Picano, F.; Costa, P.; Breugem, W.P.; Brandt, L.

    2015-01-01

    Dense suspensions are usually investigated in the laminar limit where inertial effects are insignificant. When the flow rate is high enough, i.e. at high Reynolds number, the flow may become turbulent and the interaction between solid and liquid phases modifies the turbulence we know in single-phase

  8. Average stress in a Stokes suspension of disks

    NARCIS (Netherlands)

    Prosperetti, Andrea

    2004-01-01

    The ensemble-average velocity and pressure in an unbounded quasi-random suspension of disks (or aligned cylinders) are calculated in terms of average multipoles allowing for the possibility of spatial nonuniformities in the system. An expression for the stress due to the suspended particles is

  9. 78 FR 12127 - Vitaminspice Inc.; Order of Suspension of Trading

    Science.gov (United States)

    2013-02-21

    ... periodic financial filings and in internet promotions concerning, among other things, the company's... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Vitaminspice Inc.; Order of Suspension of Trading February 19, 2013. It appears to the Securities and Exchange Commission that there is a lack of...

  10. Particle-capture mechanisms in suspension-feeding invertebrates

    DEFF Research Database (Denmark)

    Riisgård, Hans Ulrik; Larsen, Poul Scheel

    2010-01-01

    A large number of suspension-feeding animals (e.g. bivalves, polychaetes, ascidians, bryozoans, crustaceans, sponges, echinoderms, cnidarians) have specialized in grazing on not only the 2 to 200 µm phytoplankton but frequently also the 0.5 to 2 µm free-living bacteria in the aquatic environment,...

  11. 5 CFR 919.740 - Are suspension proceedings formal?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Are suspension proceedings formal? 919.740 Section 919.740 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE... your representative must submit any documentary evidence you want the suspending official to consider. ...

  12. 76 FR 33803 - Order of Suspension of Trading

    Science.gov (United States)

    2011-06-09

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Order of Suspension of Trading June 7, 2011... trading in the securities of the above-listed companies. Therefore, it is ordered, pursuant to Section 12(k) of the Securities Exchange Act of 1934, that trading in the securities of the above-listed...

  13. Viscosity of diluted suspensions of vegetal particles in water

    Directory of Open Access Journals (Sweden)

    Szydłowska Adriana

    2017-01-01

    Full Text Available Viscosity and rheological behaviour of sewage as well as sludge are essential while designing apparatuses and operations employed in the sewage treatment process and its processing. With reference to these substances, the bio-suspensions samples of three size fractions ((i 150÷212 μm, (ii 106÷150 μm and (iii below106 μm of dry grass in water with solid volume fraction 8%, 10% and 11% were prepared. After twenty four hours prior to their preparation time, the suspension samples underwent rheometeric measurements with the use of a rotational rheometer with coaxial cylinders. On the basis of the obtained results, flow curves were plotted and described with both the power model and Herschel-Bulkley model. Moreover, the viscosity of the studied substances was determined that allowed to conclude that the studied bio-suspensions display features of viscoelastic fluids. The experimentally established viscosity was compared to the calculated one according to Manley and Manson equation, recommended in the literature. It occurred that the measured viscosity values substantially exceed the calculation viscosity values, even by 105 times. The observations suggest that it stems from water imbibition of fibrous vegetal particles, which causes their swelling and decreases the amount of liquid phase in the suspension.

  14. Drift tube suspension for high intensity linear accelerators

    International Nuclear Information System (INIS)

    Clark, D.C.; Frank, J.A.; Liska, D.J.; Potter, R.C.; Schamaun, R.G.

    1982-01-01

    The disclosure relates to a drift tube suspension for high intensity linear accelerators. The system comprises a series of box-sections girders independently adjustably mounted on a linear accelerator. A plurality of drift tube holding stems are individually adjustably mounted on each girder

  15. Long time diffusion in suspensions of interacting charged colloids

    NARCIS (Netherlands)

    Schepper, I.M. de; Cohen, E.G.D.; Pusey, P.N.; Lekkerkerker, H.N.W.

    1989-01-01

    A new expression is given for the long time diffusion coefficient DL(k) of charged interacting colloidal spheres in suspension, as a function of the wavenumber k, near k = km, where the static structure factor has a maximum. The expression is based on a physical analogy between a mode description

  16. Adaptive magnetorheological seat suspension for the expeditionary fighting vehicle

    International Nuclear Information System (INIS)

    Hiemenz, G J; Hu, W; Wereley, N M

    2009-01-01

    The Expeditionary Fighting Vehicle (EFV) is an amphibious vehicle designed to operate through harsh conditions and at much higher speeds than its predecessors. These unique capabilities and broadly varying operational conditions lead to a complex design and human factors scenario for the forward seating positions that cannot be solved using conventional passive seat suspension systems. Injurious shock loads transmitted to the occupants when traversing over water in high sea states and/or at high speeds, as well as harmful shock and vibration transmitted to the occupants when the vehicle is travelling over land, pose a threat to occupant health and significantly limit mission duration. In this study, a semi-active magnetorheological (MR) seat suspension is developed which adapts to broadly varying operational conditions, as well as occupant weight, to provide optimal protection of EFV occupants. It is shown that this MR seat suspension system will reduce the shock and vibration transmitted to the occupant by up to 33% and 65%, respectively, as compared to the existing passive suspension.

  17. Adaptive magnetorheological seat suspension for the expeditionary fighting vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Hiemenz, G J [Techno-Sciences, Inc., 11750 Beltsville Dr. Ste. 300, Beltsville, MD 20705 (United States); Hu, W; Wereley, N M [Aerospace Engineering, University of Maryland, College Park, MD 20712 (United States)], E-mail: greg@technosci.com, E-mail: wereley@umd.edu

    2009-02-01

    The Expeditionary Fighting Vehicle (EFV) is an amphibious vehicle designed to operate through harsh conditions and at much higher speeds than its predecessors. These unique capabilities and broadly varying operational conditions lead to a complex design and human factors scenario for the forward seating positions that cannot be solved using conventional passive seat suspension systems. Injurious shock loads transmitted to the occupants when traversing over water in high sea states and/or at high speeds, as well as harmful shock and vibration transmitted to the occupants when the vehicle is travelling over land, pose a threat to occupant health and significantly limit mission duration. In this study, a semi-active magnetorheological (MR) seat suspension is developed which adapts to broadly varying operational conditions, as well as occupant weight, to provide optimal protection of EFV occupants. It is shown that this MR seat suspension system will reduce the shock and vibration transmitted to the occupant by up to 33% and 65%, respectively, as compared to the existing passive suspension.

  18. 21 CFR 520.2612 - Trimethoprim and sulfadiazine oral suspension.

    Science.gov (United States)

    2010-04-01

    ... blood dyscrasia, nor in those with a history of sulfonamide sensitivity. Federal law restricts this drug... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Trimethoprim and sulfadiazine oral suspension. 520.2612 Section 520.2612 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  19. Rheological properties of ceramic nanopowders in aqueous and nonaqueous suspensions

    International Nuclear Information System (INIS)

    Tomaszewski, H.; Loiko, E.M.

    2003-01-01

    The potential for ceramic nanocomposites to offer significantly enhanced mechanical properties is generally known since the first work of Niihara published in 1991. However achieving these properties needs carefully done colloidal processing, because ceramic nanopowders are naturally prone to agglomeration. The work presented here is concerned with the processing of zirconia/alumina nanocomposites via aqueous and alumina silicon carbide nanocomposites via nonaqueous colloidal route. The effect of pH of aqueous alumina and zirconia suspensions on properties of suspension and centrifuged green bodies was studied. A correlation between surface electric charge of grains (zeta potential)and agglomerate size, viscosity of suspension and porosity of green compacts was found. In the case of nonaqueous route alumina and silicon carbide suspensions in iso-propanol were investigated. Electrostatic surface charge of grains was changed by addition of chloroacetic acid and determined indirectly by the mass of powder deposited on electrode during electrophoresis. Different behaviour of SiC nanopowder than of alumina was observed and mechanism of charge creation is proposed on the base of DLVO theory. The effect of grain charge on preventing agglomeration on the silicon carbide powder is presented on micrographs of sintered nanocomposites. (author)

  20. 78 FR 33882 - Order of Suspension of Trading

    Science.gov (United States)

    2013-06-05

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Order of Suspension of Trading June 3, 2013... Wi-Tron, Inc. Zone Mining Ltd. It appears to the Securities and Exchange Commission that there is a... Commission that there is a lack of current and accurate information concerning the securities of Zone Mining...