Interior Design 1992 Buyers Guide issue.

Science.gov (United States)

1992-01-30

The Interior Design Magazine Buyers Guide is compiled with you, the designer, in mind. So it's packed with the most comprehensive collection of sources available anyplace--arranged for fast, easy access. First, the Keyword Index presents all the Buyers Guide product categories alphabetically (see the first tab divider). Refer to the page number indicated in the Product Index (second tab divider) to view various manufacturers of products under each category heading. Addresses, phone and fax numbers, regional and international showroom/representatives are located in the A-Z Index (third tab divider) in alphabetical order. Consult the table of contents for trade associations, lighting consultants, marts, and other useful sections.

Survivability design for a hybrid underwater vehicle

Energy Technology Data Exchange (ETDEWEB)

Wang, Biao; Wu, Chao; Li, Xiang; Zhao, Qingkai; Ge, Tong [State Key Lab of Ocean Engineering, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China)

2015-03-10

A novel hybrid underwater robotic vehicle (HROV) capable of working to the full ocean depth has been developed. The battery powered vehicle operates in two modes: operate as an untethered autonomous vehicle in autonomous underwater vehicle (AUV) mode and operate under remote control connected to the surface vessel by a lightweight, fiber optic tether in remotely operated vehicle (ROV) mode. Considering the hazardous underwater environment at the limiting depth and the hybrid operating modes, survivability has been placed on an equal level with the other design attributes of the HROV since the beginning of the project. This paper reports the survivability design elements for the HROV including basic vehicle design of integrated navigation and integrated communication, emergency recovery strategy, distributed architecture, redundant bus, dual battery package, emergency jettison system and self-repairing control system.

Survivability design for a hybrid underwater vehicle

International Nuclear Information System (INIS)

Wang, Biao; Wu, Chao; Li, Xiang; Zhao, Qingkai; Ge, Tong

2015-01-01

A novel hybrid underwater robotic vehicle (HROV) capable of working to the full ocean depth has been developed. The battery powered vehicle operates in two modes: operate as an untethered autonomous vehicle in autonomous underwater vehicle (AUV) mode and operate under remote control connected to the surface vessel by a lightweight, fiber optic tether in remotely operated vehicle (ROV) mode. Considering the hazardous underwater environment at the limiting depth and the hybrid operating modes, survivability has been placed on an equal level with the other design attributes of the HROV since the beginning of the project. This paper reports the survivability design elements for the HROV including basic vehicle design of integrated navigation and integrated communication, emergency recovery strategy, distributed architecture, redundant bus, dual battery package, emergency jettison system and self-repairing control system

Design Guide for Category I reactors critical facilities

International Nuclear Information System (INIS)

Brynda, W.J.; Powell, R.W.

1978-08-01

The purpose of this Design Guide is to provide additional guidance to aid the DOE facility contractor in meeting the requirement that the siting, design, construction, modification, operation, maintenance, and decommissioning of DOE-owned critical facilities be in accordance with generally uniform standards, guides, and codes which are comparable to those applied to similar reactors licensed by the Nuclear Regulatory Commission

Energy and environment design guide

Energy Technology Data Exchange (ETDEWEB)

Harman, K. [Royal Australian Institute of Architects, Canberra, ACT (Australia)

1996-04-01

The Royal Australian Institute of Architects (RAIA) released an Environment Policy for architects in September 1994 which forms part of the RAIA Code of Professional Conduct. Prior to releasing the policy, it was recognised that members needed information and education in the area of energy and environment in order to adopt and implement the guide. This document is a report on the scope, work programme and achievements of a project to provide an easy reference resource for architects and other building designers, and bring together a wide range of information and research. It includes the Environment Policy as an appendix. The project produced 24 notes entitled the `Environment Design Guide - energy/environment notes` covering a wide range of topics, and four newsletters. Feedback received from architects to date indicates that the development of the notes has had a positive effect on their knowledge of these issues, resulting in the making of informed design decisions. The topics covered by the notes are expected to expand in 1996 with the preparation of additional notes which provide information on products and sustainable construction.

Design guide for Category III reactors: pool type reactors

International Nuclear Information System (INIS)

Brynda, W.J.; Lobner, P.R.; Powell, R.W.; Straker, E.A.

1978-11-01

The Department of Energy (DOE) in the ERDA Manual requires that all DOE-owned reactors be sited, designed, constructed, modified, operated, maintained, and decommissioned in a manner that gives adequate consideration to health and safety factors. Specific guidance pertinent to the safety of DOE-owned reactors is found in Chapter 0540 of the ERDA Manual. The purpose of this Design Guide is to provide additional guidance to aid the DOE facility contractor in meeting the requirement that the siting, design, construction, modification, operation, maintenance, and decommissioning of DOE-owned reactors be in accordance with generally uniform standards, guides, and codes which are comparable to those applied to similar reactors licensed by the Nuclear Regulatory Commission (NRC). This Design Guide deals principally with the design and functional requirement of Category III reactor structures, components, and systems

Safety design guides for containment extension for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

This safety design guide for containment extension describes the containment isolation philosophy and containment extension requirements. The metal extensions and components falling within the scope of ASME Section III are classified in accordance with the CAN/CSA-N285.0 and CAN/CSA-N285.3. The special consideration for the leak monitoring capability, seismic qualification and inspection requirements for containment extensions, etc., are defined in this design guide. In addition, the containment isolation systems are defined and summarized schematically in appendix A. The change status of the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. (Author) .new

Active and passive beam application design guide for global application

CERN Document Server

Rimmer, Julian

2015-01-01

The Active and Passive Beam Application Design Guide is the result of collaboration by worldwide experts to give system designers a current, authoritative guide on successfully applying active and passive beam technology. Active and Passive Beam Application Design Guide provide energy-efficient methods of cooling, heating, and ventilating indoor areas, especially spaces that require individual zone control and where internal moisture loads are moderate. The systems are simple to operate, with low maintenance requirements. This book is an essential resource for consulting engineers, architects, owners, and contractors who are involved in the design, operation, and installation of these systems. Building on REHVA’s Chilled Beam Application Guidebook, this new guide provides up-to-date tools and advice for designing, commissioning, and operating chilled-beam systems to achieve a determined indoor climate, and includes examples of active and passive beam calculations and selections. Dual units (SI and I-P) are...

Design for Survivability: An Approach to Assured Autonomy

Science.gov (United States)

Alexandrov, Natalia M.; Ozoroski, Thomas A.

2016-01-01

Rapidly expanding unmanned air traffic includes and will continue to include non-cooperative participants. Non-cooperative behavior may be due to technical failure, a lack of appropriate equipment, a careless or malicious operator. Regardless of the cause, the outcome remains: growing density of non-cooperative traffic will increase the risk of collision between unmanned vehicles and aircraft carrying humans. As a result, the degraded safety of airspace may limit access to airspace, with adverse consequences for the traveling public and the economy. Because encounters with small non-cooperative objects, such as birds or wayward drones, can happen too rapidly for an external control system to mitigate them, it is imperative that the aircraft that carry humans survive encounters with non-cooperative vehicles. To-date, design for survivability has been practiced explicitly in the military domain. Survivability against collisions in civil aviation has been limited to tolerances against bird strikes; and these tolerances have proved inadequate on occasion. The growing risk of collision with unmanned vehicles now requires the development of survivability discipline for civilian transport aircraft. The new discipline must be infused into multidisciplinary design methods, on par with traditional disciplines. In this paper, we report on a preliminary study of survivability considerations for the civil aviation domain.

Terminal Sliding Mode Tracking Controller Design for Automatic Guided Vehicle

Science.gov (United States)

Chen, Hongbin

2018-03-01

Based on sliding mode variable structure control theory, the path tracking problem of automatic guided vehicle is studied, proposed a controller design method based on the terminal sliding mode. First of all, through analyzing the characteristics of the automatic guided vehicle movement, the kinematics model is presented. Then to improve the traditional expression of terminal sliding mode, design a nonlinear sliding mode which the convergence speed is faster than the former, verified by theoretical analysis, the design of sliding mode is steady and fast convergence in the limited time. Finally combining Lyapunov method to design the tracking control law of automatic guided vehicle, the controller can make the automatic guided vehicle track the desired trajectory in the global sense as well as in finite time. The simulation results verify the correctness and effectiveness of the control law.

Usability Testing, User-Centered Design, and LibGuides Subject Guides: A Case Study

Science.gov (United States)

Sonsteby, Alec; DeJonghe, Jennifer

2013-01-01

Usability testing has become a routine way for many libraries to ensure that their Web presence is user-friendly and accessible. At the same time, popular subject guide creation systems, such as LibGuides, decentralize Web content creation and put authorship into the hands of librarians who may not be trained in user-centered design principles. At…

Interior Design: Teacher's Instructional Guide.

Science.gov (United States)

Hays, Tricia

This teacher's instructional guide, which is part of a family and consumer sciences education series focusing on a broad range of employment opportunities, is intended to assist teachers responsible for teaching one- and two-year interior design programs for Texas high school students. The following are among the items included: (1) introductory…

Publications desktop survival guide

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

Purpose of this guide is to document and simplify the writing, reviewing, and production process for the Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance Contractor (TAC) staff and to provide specific answers concerning the content, style, and format of UMTRA Project documents. Goal of the UMTRA Project document preparation process is to deliver to the US DOE high-quality documents that meet requirements (meets expressed client needs; accurate and consistent technical content; clear writing; well organized document; consistent style). A document review process has been established to ensure that TAC documents are accurate, consistent, and well organized. The editing process applies standard rules for style and format, spelling, grammar, punctuation, and sentence structure to make the document consistent and easier to read. This guide sets forth the rules to be applied to UMTRA Project documents.

Safety design guides for seismic requirements for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

This safety design guide for seismic requirements for CANDU 9 describes the seismic design philosophy, defines the applicable earthquakes and identifies the structures and systems requiring seismic qualification to ensure that the essential safety function can be adequately satisfied following earthquake. The detailed requirements for structures, systems and components which must be seismically qualified are specified in the Appendix. The change status of the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. 1 fig., (Author) .new

DOT-7A Type A packaging design guide

International Nuclear Information System (INIS)

Kelly, D.L.

1995-01-01

The purpose of this Design Guide is to provide instruction for designing a U.S. Department of Transportation Specification 7A (DOT-7A) Type A packaging. Another purpose for this Design Guide is to support the evaluation and testing activities that are performed on new designs by a U.S. Department of Energy (DOE) test facility. This evaluation and testing program is called the DOT-7A Program. When an applicant has determined that a DOT-7A packaging is needed and not commercially available, a design may be created according to this document. The design should include a packaging drawing, specifications, analysis report, operating instructions, and a Packaging Qualification Checklist; all of which should be forwarded to a DOE/HQ approved test facility for evaluation and testing. This report is being submitted through the Engineering Documentation System so that it may be used for reference and information purposes

Guide for the realization of Design Base Documents (DBD)

International Nuclear Information System (INIS)

Roca Mallofre, G. la

2010-01-01

Guide for improving the consistency and quality content of the Design Base Documents. It's a short description of how to carry out and complete these Documents but focusing on those aspects that can be more confusing and harder to interpret. This guide aims to clarify the term Design Base distinguishing between production and safety, and it focuses on safety Design Base Documents and their values and references. It also emphasizes the difference between the support system and the interface system when there is a functional connection between different systems.

50% Advanced Energy Design Guides: Preprint

Energy Technology Data Exchange (ETDEWEB)

Bonnema, E.; Leach, M.; Pless, S.; Liu, B.; Wang, W.; Thornton, B.; Williams, J.

2012-07-01

This paper presents the process, methodology, and assumptions for the development of the 50% Energy Savings Advanced Energy Design Guides (AEDGs), a design guidance document that provides specific recommendations for achieving 50% energy savings above the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 in four building types: (1) Small to medium office buildings, (2) K-12 school buildings, (3) Medium to big box retail buildings, (4) Large hospital buildings.

Using IMPRINT to Guide Experimental Design with Simulated Task Environments

Science.gov (United States)

2015-06-18

USING IMPRINT TO GUIDE EXPERIMENTAL DESIGN OF SIMULATED TASK ENVIRONMENTS THESIS Gregory...ENG-MS-15-J-052 USING IMPRINT TO GUIDE EXPERIMENTAL DESIGN WITH SIMULATED TASK ENVIRONMENTS THESIS Presented to the Faculty Department...Civilian, USAF June 2015 DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. AFIT-ENG-MS-15-J-052 USING IMPRINT

Design and Production of an Articulating Needle Guide for Ultrasound-Guided Needle Block Manufactured With a Three-Dimensional Printer: Technical Communication.

Science.gov (United States)

Bigeleisen, Paul E

2017-05-15

Needle guides may allow the practitioner to align the needle with the probe when ultrasound-guided nerve block is performed. The author's goal was to design and fabricate an inexpensive ($1.90), disposable, needle guide that could articulate over a range from 85 degrees to 0 degrees with a three-dimension printer. Three-dimensional representations of an L50, L25, and C 60 ultrasound probe (Sono Site, Bothell, WA) were created using a laser scanner. Computer-aided design software (Solid Works, Waltham, MA) was used to design a needle bracket and needle guide to attach to these probes. A three-dimensional printer was used to fabricate the needle bracket and guide with acrylonitrile polybutadiene polystyrene. An echogenic needle was held in plane with the needle guide. The author performed a supraclavicular block in a morbidly obese patient. The needle was easily visualized. Similar guides that are commercially available cost as much as $400. A knowledge of computer-aided design is necessary for this work.

A Review Of Design And Control Of Automated Guided Vehicle Systems

NARCIS (Netherlands)

T. Le-Anh (Tuan); M.B.M. de Koster (René)

2004-01-01

textabstractThis paper presents a review on design and control of automated guided vehicle systems. We address most key related issues including guide-path design, estimating the number of vehicles, vehicle scheduling, idle-vehicle positioning, battery management, vehicle routing, and conflict

A Review Of Design And Control Of Automated Guided Vehicle Systems

OpenAIRE

Le-Anh, Tuan; Koster, René

2004-01-01

textabstractThis paper presents a review on design and control of automated guided vehicle systems. We address most key related issues including guide-path design, estimating the number of vehicles, vehicle scheduling, idle-vehicle positioning, battery management, vehicle routing, and conflict resolution. We discuss and classify important models and results from key publications in literature on automated guided vehicle systems, including often-neglected areas, such as idle-vehicle positionin...

Regulatory compliance guide for DOT-7A type A packaging design

International Nuclear Information System (INIS)

Kelly, D.L.

1996-01-01

The purpose of this guide is to provide instruction for assuring that the regulatory design requirements for a DOT-7A Type A packaging are met. This guide also supports the testing and evaluation activities that are performed on new packaging designs by a DOE-approved test facility through the DOE's DOT-7A Test Program. This Guide was updated to incorporate regulatory changes implemented by HM-169A (49 CFR, 'Transportation')

Adaptation of AASHTO Pavement Design Guide for Local Conditions

Energy Technology Data Exchange (ETDEWEB)

Hajek, J.J. [Applied Research Associates Inc., Toronto, ON (Canada)

2001-07-01

The methodology used to adapt the 1993 AASHTO Guide for Design of Pavement Structures to Ontario conditions was described. The guide expresses the effect of traffic loads on pavement performance using the concept of axle Load Equivalency Factors (LEF). LEF is regarded as a pavement damage factor assigned to each specific load and axle configuration. The size of LEF is related to the damage that is expected to occur from a standard load of 80 kN carried by a single axle with dual tires. The factors are summarized to yield the number of Equivalent Single Axle Loads (ESALs) a pavement is expected to sustain during its life. A summary was also provided of the additional work done to prepare for the transition to the proposed mechanistically-based 2002 AASHTO Guide. The paper focused only on the design of flexible pavements in terms of load characterization using equivalent single axle loads along with axle load spectra, below grade and material characterization, plus initial and terminal serviceability and reliability. The AASHTO Guide uses two parameters to deal with design reliability: design reliability level and overall standard deviation. Data collected on Ontario highway pavements and materials was used for assessing the design inputs. Other data was also collected from research and development studies, laboratory experiments, and from a survey of experienced pavement design engineers. The end result was a new grouping of Ontario soils for pavement design, recommended values for the resilient modulus of below grade soils, recommendations for structural layer coefficients for Ontario pavement materials and recommendations for the initial pavement serviceability based on Ontario smoothness specifications. Results of calibration and verification processes indicate that for new flexible pavements, the AASHTO-Ontario model is in good agreement with the observed results. It was recommended that the calibration and verification of the AASHTO-Ontario model should be a

Design of the Mechanical Parts for the Neutron Guide System at HANARO

International Nuclear Information System (INIS)

Shin, J. W.; Cho, Y. G.; Cho, S. J.; Ryu, J. S.

2008-01-01

The research reactor HANARO (High-flux Advanced Neutron Application ReactOr) in Korea will be equipped with a neutron guide system, in order to transport cold neutrons from the neutron source to the neutron scattering instruments in the neutron guide hall near the reactor building. The neutron guide system of HANARO consists of the in-pile plug assembly with in-pile guides, the primary shutter with in-shutter guides, the neutron guides in the guide shielding room with dedicated secondary shutters, and the neutron guides connected to the instruments in the neutron guide hall. Functions of the in-pile plug assembly are to shield the reactor environment from nuclear radiation and to support the neutron guides and maintain them precisely oriented. The primary shutter is a mechanical structure to be installed just after the in-pile plug assembly, which stops neutron flux on demand. This paper describes the design of the in-pile assembly and the primary shutter for the neutron guide system at HANARO. The design of the guide shielding assembly for the primary shutter and the neutron guides is also presented

A guide to printed circuit board design

CERN Document Server

Hamilton, Charles

1984-01-01

A Guide to Printed Circuit Board Design discusses the basic design principles of printed circuit board (PCB). The book consists of nine chapters; each chapter provides both text discussion and illustration relevant to the topic being discussed. Chapter 1 talks about understanding the circuit diagram, and Chapter 2 covers how to compile component information file. Chapter 3 deals with the design layout, while Chapter 4 talks about preparing the master artworks. The book also covers generating computer aided design (CAD) master patterns, and then discusses how to prepare the production drawing a

[Participatory design guide for mental health promotion in prisons].

Science.gov (United States)

Bustamante Navarro, R; Paredes-Carbonell, J J; Aviñó Juan-Ulpiano, D; González Rubio, J; Pitarch Monzó, C; Martínez Martínez, L; Arroyo-Cobo, J M

2013-01-01

[corrected] The main aim was to describe the issues and the participatory process required to design a Guide to promotemental health in prison through group activities. We reviewed the bibliography, the mental health policies, the workshops about healthy mental habits, and a video about protection and risk factors. We identified the stakeholders and sought their points of view about the topics included in the Guide. We decided on the contents of the Guide and the incorporation of the health assets model and the perspectives provided by gender and cultural diversity. After the initial design of the modules and sessions, we started a pilot in the Prison of Valencia and the Prison of Zaragoza with women and men from different cultures, incorporating the suggested improvements, unifying contents and the discursive style. The guide is formed by: a preface, introduction, description, modules, sessions and evaluation. It has 6 modules and 19 sessions on: health and motivation; self-esteem; health and emotions; more assets to improve health: relax, positive thinking, keeping calm, communication and problem resolution; progress is possible: resiliency and starring in my own change. Each session consists of: activities (objectives, material, allocated time and development), theoretical material and tabbed sheets for activities. The guide is available in print and online versions. A guide has been elaborated with involved stakeholders and the opinion of the prison population.

Interaction of impeller and guide vane in a series-designed axial-flow pump

International Nuclear Information System (INIS)

Kim, S; Choi, Y S; Lee, K Y; Kim, J H

2012-01-01

In this paper, the interaction of the impeller and guide vane in a series-designed axial-flow pump was examined through the implementation of a commercial CFD code. The impeller series design refers to the general design procedure of the base impeller shape which must satisfy the various flow rate and head requirements by changing the impeller setting angle and number of blades of the base impeller. An arc type meridional shape was used to keep the meridional shape of the hub and shroud with various impeller setting angles. The blade angle and the thickness distribution of the impeller were designed as an NACA airfoil type. In the design of the guide vane, it was necessary to consider the outlet flow condition of the impeller with the given setting angle. The meridional shape of the guide vane were designed taking into consideration the setting angle of the impeller, and the blade angle distribution of the guide vane was determined with a traditional design method using vane plane development. In order to achieve the optimum impeller design and guide vane, three-dimensional computational fluid dynamics and the DOE method were applied. The interaction between the impeller and guide vane with different combination set of impeller setting angles and number of impeller blades was addressed by analyzing the flow field of the computational results.

Self-designed femoral neck guide pin locator for femoral neck fractures.

Science.gov (United States)

Xia, Shengli; Wang, Ziping; Wang, Minghui; Wu, Zuming; Wang, Xiuhui

2014-01-01

Closed reduction and fixation with 3 cannulated screws is a widely accepted surgery for the treatment of femoral neck fractures. However, how to obtain optimal screw placement remains unclear. In the current study, the authors designed a guide pin positioning system for femoral neck fracture cannulated screw fixation and examined its application value by comparing it with freehand guide needle positioning and with general guide pin locator positioning provided by equipment manufacturers. The screw reset rate, screw parallelism, triangle area formed by the link line of the entry point of 3 guide pins, and maximum vertical load bearing of the femoral neck after internal fixation were recorded. As expected, the triangle area was largest in the self-designed positioning group, followed by the general positioning group and the freehand positioning group. The difference among the 3 groups was statistically significant (P.05). The authors’ self-designed guide pin positioning system has the potential to accurately insert cannulated screws in femoral neck fractures and may reduce bone loss and unnecessary radiation.

Technical guide to criticality alarm system design

International Nuclear Information System (INIS)

Greenfield, B.

2009-01-01

An instructional manual was created to guide criticality safety engineers through the technical aspects of designing a criticality alarm system (CAS) for Dept. of Energy (DOE) hazard class 1 and 2 facilities. The manual was structured such that it can be used by engineers designing completely new systems and by those who are working with existing facilities. Major design tasks are thoroughly analyzed to provide concise direction for how to complete the analysis. Regulatory and technical performance requirements were both addressed. (authors)

CMOS sigma-delta converters practical design guide

CERN Document Server

De la Rosa, Jose M

2013-01-01

A comprehensive overview of Sigma-Delta Analog-to-Digital Converters (ADCs) and a practical guide to their design in nano-scale CMOS for optimal performance. This book presents a systematic and comprehensive compilation of sigma-delta converter operating principles, the new advances in architectures and circuits, design methodologies and practical considerations - going from system-level specifications to silicon integration, packaging and measurements, with emphasis on nanometer CMOS implementation. The book emphasizes practical design issues - from high-level behavioural modelling i

Design basis ground motion (Ss) required on new regulatory guide

International Nuclear Information System (INIS)

Kamae, Katsuhiro

2013-01-01

New regulatory guide is enforced on July 8. Here, it is introduced how the design basis ground motion (Ss) for seismic design of nuclear power reactor facilities was revised on the new guide. Ss is formulated as two types of earthquake ground motions, earthquake ground motions with site specific earthquake source and with no such specific source locations. The latter is going to be revised based on the recent observed near source ground motions. (author)

Textile Design: A Suggested Program Guide. Fashion Industry Series No. 3.

Science.gov (United States)

Fashion Inst. of Tech., New York, NY.

The textile design guide is the third of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The job-preparatory guide is conceived to provide youth and adults with intensive preparation for initial entry employment and also with career advancement opportunities within specific…

Standard guide for design criteria for plutonium gloveboxes

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This guide defines criteria for the design of glovebox systems to be used for the handling of plutonium in any chemical or physical form or isotopic composition or when mixed with other elements or compounds. Not included in the criteria are systems auxiliary to the glovebox systems such as utilities, ventilation, alarm, and waste disposal. Also not addressed are hot cells or open-face hoods. The scope of this guide excludes specific license requirements relating to provisions for criticality prevention, hazards control, safeguards, packaging, and material handling. Observance of this guide does not relieve the user of the obligation to conform to all federal, state, and local regulations for design and construction of glovebox systems. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user...

Stationary battery guide: Design, application, and maintenance. Final report

International Nuclear Information System (INIS)

1997-11-01

This guide has been prepared to assist a variety of users with stationary battery design, application, and maintenance. The following battery-related topics are discussed in detail: (1) fundamentals--how batteries are designed and how they work; (2) aging, degradation, and failures with an emphasis on how various maintenance tasks can prevent, detect, or repair certain degradation mechanisms; (3) applications--how batteries are designed for a specific purpose and how the battery industry has evolved; (4) sizing for different applications; (5) protection and charging; (6) periodic inspections and checks; (7) capacity discharge testing; (8) installation and replacement considerations; and (9) problems that can occur with battery systems. Since the original guide was published, new IEEE Recommended Practices related to stationary battery applications have been issued. This revision addresses those industry changes as well as some of the emerging issues related to the development of other industry documents. This guide has been prepared as a comprehensive reference source for stationary batteries and is intended to address the design, application, and maintenance needs of users. The technical discussions are at the application level. Fundamentals of battery design are covered in greater detail in this revision. More details related to internal cell materials, their operational relationship, and performance over the expected life of the battery cell are provided. This information has been included because many changes in battery cell materials, manufacturing and design processes are not always communicated to the user

A revision of the Cask Designers Guide for the '90s

International Nuclear Information System (INIS)

Shappert, L.B.; Green, V.M.

1992-01-01

The report A Guide for the Design Fabrication, and Operation of Shipping Casks for Nuclear Applications, ORNL-NSIC-68, commonly called the Cask Designers Guide, is being revised at the request of the Transportation and Packaging Safety Division of the Department of Energy (DOE). The new document will be called the Packaging Handbook. The Cask Designers Guide was published in 1970 during the period when many radioactive materials packagings were being developed and many technical studies applicable to these packagings were being performed. Since that period, many improvements in packaging design have appeared, designers have improved their calculational techniques, and much effort has gone into applying Quality Assurance (QA) principles to cask development Materials, and their limitations, have surfaced as a very important consideration in the licensing process. While the Packaging Handbook considers all Type B packages, most of the authors' experience lies in the technical areas found in the licensing of spent nuclear fuel (SNF) packagings and this is reflected in the document

Design guide for category II reactors light and heavy water cooled reactors

International Nuclear Information System (INIS)

Brynda, W.J.; Lobner, P.R.; Powell, R.W.; Straker, E.A.

1978-05-01

The Department of Energy (DOE), in the ERDA Manual, requires that all DOE-owned reactors be sited, designed, constructed, modified, operated, maintained, and decommissioned in a manner that gives adequate consideration to health and safety factors. Specific guidance pertinent to the safety of DOE-owned reactors is found in Chapter 0540 of the ERDA Manual. The purpose of this Design Guide is to provide additional guidance to aid the DOE facility contractor in meeting the requirement that the siting, design, construction, modification operation, maintainance, and decommissioning of DOW-owned reactors be in accordance with generally uniform standards, guide and codes which are comparable to those applied to similar reactors licensed by the Nuclear Regulatory Commission (NRC). This Design Guide deals principally with the design and functional requirements of Category II reactor structure, components, and systems

Guide design study for the high-resolution backscattering spectrometer FIRES

Energy Technology Data Exchange (ETDEWEB)

Pelley, C; Kargl, F; Sakai, V Garcia; Telling, M T F; Fernandez-Alonso, F; Demmel, F, E-mail: franz.demmel@stfc.ac.uk

2010-11-01

Different options are considered to transport cold neutrons along 90 m for the proposed new spectrometer FIRES at the ISIS facility. Monte Carlo simulations using the McStas programme package are used to assess the performance of various guide designs from the biological shield to the sample position. By employing a curved geometry, to avoid the direct line of sight, a hybrid design which combines a curved ballistic guide and an elliptic focusing section appears to be the best solution.

2016 U.S. Department of Energy Race to Zero Student Design Competition Guide

Energy Technology Data Exchange (ETDEWEB)

2016-03-01

This Guide to the Race to Zero Student Design Competition is a comprehensive overview of the framework, timeline, design parameters, judging criteria, and awards. This Guide provides links to resources that the teams will need.

Designing and conducting survey research a comprehensive guide

CERN Document Server

Rea, Louis M

2014-01-01

The industry standard guide, updated with new ideas and SPSS analysis techniques Designing and Conducting Survey Research: A Comprehensive Guide Fourth Edition is the industry standard resource that covers all major components of the survey process, updated to include new data analysis techniques and SPSS procedures with sample data sets online. The book offers practical, actionable guidance on constructing the instrument, administrating the process, and analyzing and reporting the results, providing extensive examples and worksheets that demonstrate the appropriate use of survey and data tech

Longevity of anterior resin-bonded bridges: survival rates of two tooth preparation designs.

Science.gov (United States)

Abuzar, M; Locke, J; Burt, G; Clausen, G; Escobar, K

2018-04-16

Significant developments have occurred in the design of resin-bonded bridges (RBB) over the past two decades. They are commonly used as an alternative treatment option for a single missing tooth. The longevity of these bridges needs to be further investigated to evaluate long-term outcomes for this option to remain relevant. A cohort of patients who received anterior resin-bonded bridges (ARBB) over two decades was studied retrospectively. Longevity of 206 ARBB was assessed using Kaplan-Meier probability estimates. The two modified tooth preparation designs investigated were: (A) mesial and distal vertical grooves only; and (B) one proximal groove adjacent to the pontic and two palatal grooves. Age and gender of the patient cohort were also recorded. Overall survival rate of ARBB was 98% at 5 years, 97.2% at 10 years, and 95.1% from 12 years till 21 years. Survival curves showed minor differences when compared for the two designs, age groups and gender of ARBB recipients. Differences in the proportion of surviving bridges for design A (95.96%) and design B (98.13%) were not statistically significant (Fisher's exact test). Anterior RBB with described tooth preparation designs demonstrate a high survival rate. © 2018 Australian Dental Association.

Guide to the safety design examination about light water reactor facilities for power generation

International Nuclear Information System (INIS)

Anon.

1977-01-01

This guide was compiled to evaluate the validity of the design policy when the safety design is examined at the time of the application for approval of the installation of nuclear reactors. About 7 years has elapsed since the existing guide was established, and the more appropriate guide to evaluate the safety should be made on the basis of the knowledge and experience accumulated thereafter. The range of application of this guide is limited to the above described evaluation, and it is not intended as the general standard for the design of nuclear reactors. First, the definition of the words used in this guide is given. Then, the guide to the safety examination is described about the general matters of reactor facilities, nuclear reactors and the measuring and controlling system, reactor-stopping system, reactivity-controlling system and safety protection system, reactor-cooling system, reactor containment vessels, fuel handling and waste treatment system. Several matters which require attention in the application of this guide or the clarification of the significance and interpretation of the guide itself were found, therefore the explanation about them was added at the end of this guide. (Kako, I.)

Safety design guides for environmental qualification for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

This safety design guide describes the safety philosophy and requirements for the environmental qualification of safety related systems and components for CANDU 9. The environmental qualification program identifies the equipments to be qualified and conditions to be used for qualification and provides comprehensive set of documentation to ensure that the qualification is complete and can be maintained for the life of the plant. A summary of the system, components and structures requiring environmental qualification is provided in the table for the guidance of the system design, and this table will be subject to change or confirmation by the environmental qualification program. Also, plant ares subject to harsh environment is provided in the figure. The change status of the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. 1 tab., 5 figs. (Author) .new

jQuery for designers beginner's guide

CERN Document Server

MacLees, Natalie

2014-01-01

A step-by-step guide that spices up your web pages and designs them in the way you want using the most widely used JavaScript library, jQuery. The beginner-friendly and easy-to-understand approach of the book will help get to grips with jQuery in no time. If you know the fundamentals of HTML and CSS, and want to extend your knowledge by learning to use JavaScript, then this is just the book for you. jQuery makes JavaScript straightforward and approachable - you'll be surprised at how easy it can be to add animations and special effects to your beautifully designed pages.

Rationale and design of the GUIDE-IT study: Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure.

Science.gov (United States)

Felker, G Michael; Ahmad, Tariq; Anstrom, Kevin J; Adams, Kirkwood F; Cooper, Lawton S; Ezekowitz, Justin A; Fiuzat, Mona; Houston-Miller, Nancy; Januzzi, James L; Leifer, Eric S; Mark, Daniel B; Desvigne-Nickens, Patrice; Paynter, Gayle; Piña, Ileana L; Whellan, David J; O'Connor, Christopher M

2014-10-01

The GUIDE-IT (Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure) study is designed to determine the safety, efficacy, and cost-effectiveness of a strategy of adjusting therapy with the goal of achieving and maintaining a target N-terminal pro-B-type natriuretic peptide (NT-proBNP) level of levels provide key prognostic information in patients with HF. Therapies proven to improve outcomes in patients with HF are generally associated with decreasing levels of NPs, and observational data show that decreases in NP levels over time are associated with favorable outcomes. Results from smaller prospective, randomized studies of this strategy thus far have been mixed, and current guidelines do not recommend serial measurement of NP levels to guide therapy in patients with HF. GUIDE-IT is a prospective, randomized, controlled, unblinded, multicenter clinical trial designed to randomize approximately 1,100 high-risk subjects with systolic HF (left ventricular ejection fraction ≤40%) to either usual care (optimized guideline-recommended therapy) or a strategy of adjusting therapy with the goal of achieving and maintaining a target NT-proBNP level of study are followed up at regular intervals and after treatment adjustments for a minimum of 12 months. The primary endpoint of the study is time to cardiovascular death or first hospitalization for HF. Secondary endpoints include time to cardiovascular death and all-cause mortality, cumulative mortality, health-related quality of life, resource use, cost-effectiveness, and safety. The GUIDE-IT study is designed to definitively assess the effects of an NP-guided strategy in high-risk patients with systolic HF on clinically relevant endpoints of mortality, hospitalization, quality of life, and medical resource use. (Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure [GUIDE-IT]; NCT01685840). Copyright © 2014 American College of Cardiology Foundation

ALS beamline design requirements: A guide for beamline designers

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

This manual is written as a guide for researchers in designing beamlines and endstations acceptable for use at the ALS. It contains guidelines and policies related to personnel safety and equipment and vacuum protection. All equipment and procedures must ultimately satisfy the safety requirements set aside in the Lawrence Berkeley National Laboratory (LBNL) Health and Safety Manual (PUB-3000) which is available from the ALS User Office or on the World WideWeb from the LBNL Homepage (http:// www.lbl.gov).

End-Tidal CO2-Guided Chest Compression Delivery Improves Survival in a Neonatal Asphyxial Cardiac Arrest Model.

Science.gov (United States)

Hamrick, Justin T; Hamrick, Jennifer L; Bhalala, Utpal; Armstrong, Jillian S; Lee, Jeong-Hoo; Kulikowicz, Ewa; Lee, Jennifer K; Kudchadkar, Sapna R; Koehler, Raymond C; Hunt, Elizabeth A; Shaffner, Donald H

2017-11-01

To determine whether end-tidal CO2-guided chest compression delivery improves survival over standard cardiopulmonary resuscitation after prolonged asphyxial arrest. Preclinical randomized controlled study. University animal research laboratory. 1-2-week-old swine. After undergoing a 20-minute asphyxial arrest, animals received either standard or end-tidal CO2-guided cardiopulmonary resuscitation. In the standard group, chest compression delivery was optimized by video and verbal feedback to maintain the rate, depth, and release within published guidelines. In the end-tidal CO2-guided group, chest compression rate and depth were adjusted to obtain a maximal end-tidal CO2 level without other feedback. Cardiopulmonary resuscitation included 10 minutes of basic life support followed by advanced life support for 10 minutes or until return of spontaneous circulation. Mean end-tidal CO2 at 10 minutes of cardiopulmonary resuscitation was 34 ± 8 torr in the end-tidal CO2 group (n = 14) and 19 ± 9 torr in the standard group (n = 14; p = 0.0001). The return of spontaneous circulation rate was 7 of 14 (50%) in the end-tidal CO2 group and 2 of 14 (14%) in the standard group (p = 0.04). The chest compression rate averaged 143 ± 10/min in the end-tidal CO2 group and 102 ± 2/min in the standard group (p tidal CO2-guided chest compression delivery. The response of the relaxation arterial pressure and cerebral perfusion pressure to the initial epinephrine administration was greater in the end-tidal CO2 group than in the standard group (p = 0.01 and p = 0.03, respectively). The prevalence of resuscitation-related injuries was similar between groups. End-tidal CO2-guided chest compression delivery is an effective resuscitation method that improves early survival after prolonged asphyxial arrest in this neonatal piglet model. Optimizing end-tidal CO2 levels during cardiopulmonary resuscitation required that chest compression delivery rate exceed current guidelines

Improved design of guide wall of bank spillway at Yutang Hydropower Station

Directory of Open Access Journals (Sweden)

Ji-bao Wang

2010-03-01

Full Text Available Ensuring that water flows smoothly into spillways is the main challenge in spillway design. In order to help avoid the formation of vortices and separation of flow along the guide wall in front of the gates during overflow through the spillway, an experiment with a physical model of the Yutang Dam bank spillway was carried out. The profile of the guide wall was redesigned to eliminate the formation of vortices and separation of flow. This involves opening up holes in the middle part of the guide wall. The test results show that the design is effective in improving the flow conditions of the inlet, and in ensuring the desired values of water head along the guide wall and discharge capacities of the spillway.

A revision of the cask designers guide for the '90s

International Nuclear Information System (INIS)

Shappert, L.B.; Green, V.M.

1993-01-01

DOE has requested that ORNL initiate a revision to NSIC-68, A Guide for the Design, Fabrication, and Operation of Shipping Casks for Nuclear Applications, commonly called the Cask Designers Guide. This revision, called the Cask Handbook, has two goals: (1) to improve the quality of SARPs that are submitted to DOE, and (2) to provide up-to-date information on the design of spent fuel shipping casks, including information on fabrication, quality assurance, SARP preparation, certification, use, maintenance, and other general topics. The revision provides guidance that will help engineers through the cask licensing process, in part, by providing as much regulator-approved data and 'lessons-learned' information as possible. The effort is sponsored by DOE-Environmental, Safety and Health (EH), guided by Transportation Technology staff members at ORNL, and the information is being generated by experts in the various technical fields. (J.P.N.)

Design of intermediate die shape of multistage profile drawing for linear motion guide

International Nuclear Information System (INIS)

Lee, Sang Kon; Lee, Jae Eun; Kim, Sung Min; Kim, Byung Min

2010-01-01

The design of an intermediate die shape is very important in multistage profile drawing. In this study, two design methods for the intermediate die shape of a multistage profile drawing for producing a linear motion guide (LM) guide is proposed. One is the electric field analysis method using the equipotential lines generated by electric field analysis, and the other is the virtual die method using a virtual drawing die constructed from the initial material and the final product shape. In order to design the intermediate die shapes of a multistage profile drawing for producing LM guide, the proposed design methods are applied, and then FE analysis and profile drawing experiment are performed. As a result, based on the measurement of dimensional accuracy, it can be known that the intermediate die shape can be designed effectively

Development of Secondary Route Bridge Design Plan Guides

Science.gov (United States)

2018-03-03

The objective of this study is to develop a set of bridge plan guides for low-volume traffic roads. The purpose of the plans is to facilitate construction of new structures suitable for local agencies. The designs are to specifically address common l...

A pragmatic guide to multiphoton microscope design

Science.gov (United States)

Young, Michael D.; Field, Jeffrey J.; Sheetz, Kraig E.; Bartels, Randy A.; Squier, Jeff

2016-01-01

Multiphoton microscopy has emerged as a ubiquitous tool for studying microscopic structure and function across a broad range of disciplines. As such, the intent of this paper is to present a comprehensive resource for the construction and performance evaluation of a multiphoton microscope that will be understandable to the broad range of scientific fields that presently exploit, or wish to begin exploiting, this powerful technology. With this in mind, we have developed a guide to aid in the design of a multiphoton microscope. We discuss source selection, optical management of dispersion, image-relay systems with scan optics, objective-lens selection, single-element light-collection theory, photon-counting detection, image rendering, and finally, an illustrated guide for building an example microscope. PMID:27182429

Analog circuit design a tutorial guide to applications and solutions

CERN Document Server

Williams, Jim

2011-01-01

* Covers the fundamentals of linear/analog circuit and system design to guide engineers with their design challenges. * Based on the Application Notes of Linear Technology, the foremost designer of high performance analog products, readers will gain practical insights into design techniques and practice. * Broad range of topics, including power management tutorials, switching regulator design, linear regulator design, data conversion, signal conditioning, and high frequency/RF design. * Contributors include the leading lights in analog design, Robert Dobkin, Jim Willia

Apparel Design and Production: A Suggested Program Guide. Fashion Industry Series No. 2.

Science.gov (United States)

Fashion Inst. of Tech., New York, NY.

The apparel design and production guide is the second of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. Designed to provide youths and adults with intensive preparation for initial entry employment and also with career advancement opportunities within specific categories of jobs,…

Design of reactor containment systems for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2008-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. It is a revision of the Safety Guide on Design of the Reactor Containment Systems in Nuclear Power Plants (Safety Series No. 50-Sg-D1) issued in 1985 and supplements the Safety Requirements publication on Safety of Nuclear Power Plants: Design. The present Safety Guide was prepared on the basis of a systematic review of the relevant publications, including the Safety of Nuclear Power Plants: Design, the Safety fundamentals publication on The Safety of Nuclear Installations, Safety Guides, INSAG Reports, a Technical Report and other publications covering the safety of nuclear power plants. 1.2. The confinement of radioactive material in a nuclear plant, including the control of discharges and the minimization of releases, is a fundamental safety function to be ensured in normal operational modes, for anticipated operational occurrences, in design basis accidents and, to the extent practicable, in selected beyond design basis accidents. In accordance with the concept of defence in depth, this fundamental safety function is achieved by means of several barriers and levels of defence. In most designs, the third and fourth levels of defence are achieved mainly by means of a strong structure enveloping the nuclear reactor. This structure is called the 'containment structure' or simply the 'containment'. This definition also applies to double wall containments. 1.3. The containment structure also protects the reactor against external events and provides radiation shielding in operational states and accident conditions. The containment structure and its associated systems with the functions of isolation, energy management, and control of radionuclides and combustible gases are referred to as the containment systems

Design of reactor containment systems for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. It is a revision of the Safety Guide on Design of the Reactor Containment Systems in Nuclear Power Plants (Safety Series No. 50-Sg-D1) issued in 1985 and supplements the Safety Requirements publication on Safety of Nuclear Power Plants: Design. The present Safety Guide was prepared on the basis of a systematic review of the relevant publications, including the Safety of Nuclear Power Plants: Design, the Safety fundamentals publication on The Safety of Nuclear Installations, Safety Guides, INSAG Reports, a Technical Report and other publications covering the safety of nuclear power plants. 1.2. The confinement of radioactive material in a nuclear plant, including the control of discharges and the minimization of releases, is a fundamental safety function to be ensured in normal operational modes, for anticipated operational occurrences, in design basis accidents and, to the extent practicable, in selected beyond design basis accidents. In accordance with the concept of defence in depth, this fundamental safety function is achieved by means of several barriers and levels of defence. In most designs, the third and fourth levels of defence are achieved mainly by means of a strong structure enveloping the nuclear reactor. This structure is called the 'containment structure' or simply the 'containment'. This definition also applies to double wall containments. 1.3. The containment structure also protects the reactor against external events and provides radiation shielding in operational states and accident conditions. The containment structure and its associated systems with the functions of isolation, energy management, and control of radionuclides and combustible gases are referred to as the containment systems

Constraining designs for synthesis and timing analysis a practical guide to synopsys design constraints (SDC)

CERN Document Server

Gangadharan, Sridhar

2013-01-01

This book serves as a hands-on guide to timing constraints in integrated circuit design.  Readers will learn to maximize performance of their IC designs, by specifying timing requirements correctly.  Coverage includes key aspects of the design flow impacted by timing constraints, including synthesis, static timing analysis and placement and routing.  Concepts needed for specifying timing requirements are explained in detail and then applied to specific stages in the design flow, all within the context of Synopsys Design Constraints (SDC), the industry-leading format for specifying constraints.  ·         Provides a hands-on guide to synthesis and timing analysis, using Synopsys Design Constraints (SDC), the industry-leading format for specifying constraints; ·         Includes key topics of interest to a synthesis, static timing analysis or  place and route engineer; ·         Explains which constraints command to use for ease of maintenance and reuse, given several options pos...

Design guide for calculating fluid damping for circular cylindrical structures

International Nuclear Information System (INIS)

Chen, S.S.

1983-06-01

Fluid damping plays an important role for structures submerged in fluid, subjected to flow, or conveying fluid. This design guide presents a summary of calculational procedures and design data for fluid damping for circular cylinders vibrating in quiescent fluid, crossflow, and parallel flow

Establishing appropriate inputs when using the mechanistic-empirical pavement design guide to design rigid pavements in Pennsylvania.

Science.gov (United States)

2011-03-01

Each design input in the Mechanistic-Empirical Design Guide (MEPDG) required for the design of Jointed Plain Concrete : Pavements (JPCPs) is introduced and discussed in this report. Best values for Pennsylvania conditions were established and : recom...

Comparison of the General Electric BWR/6 standard plant design to the IAEA NUSS codes and guides

International Nuclear Information System (INIS)

D'Ardenne, W.H.; Sherwood, G.G.

1985-01-01

The General Electric BWR/6 Mark III standard plant design meets or exceeds current requirements of published International Atomic Energy Agency (IAEA) Nuclear Safety Standards (NUSS) codes and guides. This conclusion is based on a review of the NUSS codes and guides by General Electric and by the co-ordinated US review of the NUSS codes and guides during their development. General Electric compared the published IAEA NUSS codes and guides with the General Electric design. The applicability of each code and guide to the BWR/6 Mark III standard plant design was determined. Each code or guide was reviewed by a General Electric engineer knowledgeable about the structures, systems and components addressed and the technical area covered by that code or guide. The results of this review show that the BWR/6 Mark III standard plant design meets or exceeds the applicable requirements of the published IAEA NUSS codes and guides. The co-ordinated US review of the IAEA NUSS codes and guides corroborates the General Electric review. In the co-ordinated US review, the USNRC and US industry organizations (including General Electric) review the NUSS codes and guides during their development. This review ensures that the NUSS codes and guides are consistent with the current US government regulations, guidance and regulatory practices, US voluntary industry codes and standards, and accepted US industry design, construction and operational practices. If any inconsistencies are identified, comments are submitted to the IAEA by the USNRC. All US concerns submitted to the IAEA have been resolved. General Electric design reviews and the Final Design Approval (FDA) issued by the USNRC have verified that the General Electric BWR/6 Mark III standard plant design meets or exceeds the current US requirements, guidance and practices. Since these requirements, guidance and practices meet or exceed those of the NUSS codes and guides, so does the General Electric design. (author)

Guiding bioprocess design by microbial ecology.

Science.gov (United States)

Volmer, Jan; Schmid, Andreas; Bühler, Bruno

2015-06-01

Industrial bioprocess development is driven by profitability and eco-efficiency. It profits from an early stage definition of process and biocatalyst design objectives. Microbial bioprocess environments can be considered as synthetic technical microbial ecosystems. Natural systems follow Darwinian evolution principles aiming at survival and reproduction. Technical systems objectives are eco-efficiency, productivity, and profitable production. Deciphering technical microbial ecology reveals differences and similarities of natural and technical systems objectives, which are discussed in this review in view of biocatalyst and process design and engineering strategies. Strategies for handling opposing objectives of natural and technical systems and for exploiting and engineering natural properties of microorganisms for technical systems are reviewed based on examples. This illustrates the relevance of considering microbial ecology for bioprocess design and the potential for exploitation by synthetic biology strategies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Multi-objective optimisation for spacecraft design for demise and survivability

OpenAIRE

Trisolini, Mirko; Colombo, Camilla; Lewis, Hugh

2017-01-01

The paper presents the development of a multi-objective optimisation framework to study the effects that preliminary design choices have on the demisability and the survivability of a spacecraft. Building a spacecraft such that most of it will demise during the re-entry through design-for-demise strategies may lead to design that are more vulnerable to space debris impacts, thus compromising the reliability of the mission. The two models developed to analyse the demisability and the survivabi...

GIS cartography a guide to effective map design

CERN Document Server

Peterson, Gretchen N

2009-01-01

Maps, either printed or digital, can create effective communication with bosses, clients, other scientists, and the public. However, entry level GISers often find that map design was given short shrift in their pre-professional life. It is time for the GIS field, which is maturing in other ways, to improve its skills in this area. Based on the author's more than ten years of research and practice in map design, GIS Cartography: A Guide to Effective Map Design provides the tools to create truly sophisticated maps. Packed full of in-depth information and advice, this book covers all facets of ma

Designing Environments for Handicapped Children: A Design Guide and Case Study. First Edition.

Science.gov (United States)

Moore, Gary T.; And Others

This guide addresses the planning and architectural design of play/learning environments for special needs children. The exceptional children discussed include those with most types of mild to severe handicaps and developmental disabilities. Specifically excluded from consideration are health impairments, severe psycho-emotional difficulties such…

The NUSS safety guides in design and the use of computers

International Nuclear Information System (INIS)

Fischer, J.

1986-01-01

After a brief summary of the NUSS programme, the two design guides are discussed which deal with instrumentation and control circuitry. The potential use of computers is covered differently in these guides because of the historical development and more importantly because of the difference in importance to safety of the I and C systems which are dealt with in these papers. The Agency would consider modifications to the existing guides only when sufficient consensus about the use of computers would warrant a revision of the documents. (author)

Safety design guide for pipe rupture protection for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

This safety design guide for pipe rupture protection identifies high-energy systems in which pipe ruptures must be postulated to occur, as well as systems that must be protected from the dynamic effects of such ruptures. Dynamic effects considered in this SDG consist of pipe whip (including missiles generated by pipe ruptures, if any) and jet impingement, Requirements for protection against the dynamic effects of a postulated pipe rupture and method of protection of essential structures, systems and components are specified for these effects. The change status for the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. 2 tabs., 5 refs. (Author) .new

An Integrated User Interface Style Guide for the ESF-CCS, RPS and CPCS display design

International Nuclear Information System (INIS)

Park, Jae Kyu; Lee, Hyun Chul; Hwang, Seong Hwan; Jang, Tong Il; Kang, Suk Ho; Lee, Jung Woon; Lee, Yong Hee

2009-01-01

The human machine interface (HMI) design process is important to enhance the safety and reliability of a Nuclear Power Plant (NPP) operation. Various MMI activities are achieved with progress of MMI and environment of NPP. These activities are impossible to utilize when upgrade of environment because most of these activities emphasize hardware aspect. Also, the human factors guidelines mostly describe the human factors principles so the designer has to adapt them to apply them to his design. The design-specific guideline that is specially dedicated to a unique system and derived from the general guidelines is called style guide. The style guide provides easy to use templates to help the user interface design, and these templates help ensure a consistent look and behavior throughout the design products. However, it could be difficult for a designer to select the human factors guideline items related to a target system and to derive a style guide from the items. This paper describes human factors activities carried out to develop a style guide for the ESF-CCS, RPS and CPCS system

Advanced Energy Design Guide K-12: Next Generation of School Design and Operation

Energy Technology Data Exchange (ETDEWEB)

Torcellini, Paul A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-01-01

Driven by energy efficiency advances and renewable energy cost reductions, zero energy buildings are popping up all around the country. Although zero energy represents a bold paradigm shift - from buildings that consume energy to buildings that produce enough energy to meet their energy needs on an annual basis - it isn't a sudden shift. Zero energy buildings are the result of steady, incremental progress by researchers and building professionals working together to improve building energy performance. ASHRAE is taking the lead by publishing - in partnership with the American Institute of Architects (AIA), the Illuminating Engineering Society (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy (DOE) - a new series of advanced energy design guides (AEDGs) focused on zero energy buildings. The recently completed Advanced Energy Design Guide for K-12 School Buildings: Achieving Zero Energy (K-12 ZE AEDG) is the first in this series.

Best Practices Guide for Energy-Efficient Data Center Design

Energy Technology Data Exchange (ETDEWEB)

O. VanGeet: NREL

2010-02-24

This guide provides an overview of best practices for energy-efficient data center design which spans the categories of Information Technology (IT) systems and their environmental conditions, data center air management, cooling and electrical systems, on-site generation, and heat recovery.

Best Practices Guide for Energy-Efficient Data Center Design: Revised March 2011 (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2011-03-01

This guide provides an overview of best practices for energy-efficient data center design which spans the categories of Information Technology (IT) systems and their environmental conditions, data center air management, cooling and electrical systems, on-site generation, and heat recovery. IT system energy efficiency and environmental conditions are presented first because measures taken in these areas have a cascading effect of secondary energy savings for the mechanical and electrical systems. This guide concludes with a section on metrics and benchmarking values by which a data center and its systems energy efficiency can be evaluated. No design guide can offer 'the most energy-efficient' data center design but the guidelines that follow offer suggestions that provide efficiency benefits for a wide variety of data center scenarios.

Protection against internal fires and explosions in the design of nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

Experience of the past two decades in the operation of nuclear power plants and modern analysis techniques confirm that fire may be a real threat to nuclear safety and should receive adequate attention from the beginning of the design process throughout the life of the plant. Within the framework of the NUSS programme, a Safety Guide on fire protection had therefore been developed to enlarge on the general requirements given in the Code. Since its first publication in 1979, there has been considerable development in protection technology and analysis methods and after the Chernobyl accident it was decided to revise the existing Guide. This Safety Guide supplements the requirements established in Safety of Nuclear Power Plants: Design. It supersedes Safety Series No. 50-SG-D2 (Rev. 1), Fire Protection in Nuclear Power Plants: A Safety Guide, issued in 1992.The present Safety Guide is intended to advise designers, safety assessors and regulators on the concept of fire protection in the design of nuclear power plants and on recommended ways of implementing the concept in some detail in practice

Safety design guides for grouping and separation for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

This safety design guide for grouping and separation describes the philosophy of physical and functional separation for systems, structures and components in CANDU 9 plants and provides the requirements for the implementation of the philosophy in the detailed plant design. The separation of the safety systems is to ensure that common cause events and functional interconnections between systems do not impair the capability to perform the required safety functions for accident conditions. The separation requirements are also applied to the design by grouping the plant systems into two basic groups. Group 1 includes the power production systems and Group 2 includes the safety related systems required for the mitigation of serious process failure. The Group 2 is further separated into subgroups to ensure that events that could cause failure of a special safety system in one subgroup can be mitigated by the other subgroup. The change status for the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. 2 tabs., 6 figs. (Author) .new

Safety design guides for grouping and separation for CANDU 9

Energy Technology Data Exchange (ETDEWEB)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young [Korea Atomic Energy Research Institute, Daeduk (Korea, Republic of); Wright, A C.D. [Atomic Energy of Canada Ltd., Toronto (Canada)

1996-03-01

This safety design guide for grouping and separation describes the philosophy of physical and functional separation for systems, structures and components in CANDU 9 plants and provides the requirements for the implementation of the philosophy in the detailed plant design. The separation of the safety systems is to ensure that common cause events and functional interconnections between systems do not impair the capability to perform the required safety functions for accident conditions. The separation requirements are also applied to the design by grouping the plant systems into two basic groups. Group 1 includes the power production systems and Group 2 includes the safety related systems required for the mitigation of serious process failure. The Group 2 is further separated into subgroups to ensure that events that could cause failure of a special safety system in one subgroup can be mitigated by the other subgroup. The change status for the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. 2 tabs., 6 figs. (Author) .new.

Designing a monitoring program to estimate estuarine survival of anadromous salmon smolts: simulating the effect of sample design on inference

Science.gov (United States)

Romer, Jeremy D.; Gitelman, Alix I.; Clements, Shaun; Schreck, Carl B.

2015-01-01

A number of researchers have attempted to estimate salmonid smolt survival during outmigration through an estuary. However, it is currently unclear how the design of such studies influences the accuracy and precision of survival estimates. In this simulation study we consider four patterns of smolt survival probability in the estuary, and test the performance of several different sampling strategies for estimating estuarine survival assuming perfect detection. The four survival probability patterns each incorporate a systematic component (constant, linearly increasing, increasing and then decreasing, and two pulses) and a random component to reflect daily fluctuations in survival probability. Generally, spreading sampling effort (tagging) across the season resulted in more accurate estimates of survival. All sampling designs in this simulation tended to under-estimate the variation in the survival estimates because seasonal and daily variation in survival probability are not incorporated in the estimation procedure. This under-estimation results in poorer performance of estimates from larger samples. Thus, tagging more fish may not result in better estimates of survival if important components of variation are not accounted for. The results of our simulation incorporate survival probabilities and run distribution data from previous studies to help illustrate the tradeoffs among sampling strategies in terms of the number of tags needed and distribution of tagging effort. This information will assist researchers in developing improved monitoring programs and encourage discussion regarding issues that should be addressed prior to implementation of any telemetry-based monitoring plan. We believe implementation of an effective estuary survival monitoring program will strengthen the robustness of life cycle models used in recovery plans by providing missing data on where and how much mortality occurs in the riverine and estuarine portions of smolt migration. These data

Design and tests of an adaptive focusing neutron guide

International Nuclear Information System (INIS)

Valicu, Roxana Georgiana

2012-01-01

This work contains the Monte Carlo Simulations, as well as the first tests with an adaptive focusing neutron guide for creating a focus that does not depend on the wavelength of the incoming neutrons. All known neutron guides consist of a rectangular shape, built out of four glass plates. The inner side of the guide is coated with a complex structure of metal layers. This reflects and guides the neutrons (in analogy with the reflection of the light). For beam focusing neutron guides with fixed curvature can be built. For most experiments it is important that the beam is focused on to a small surface of the sample. In the case of focusing guides with fixed curvature it has been observed that the focusing (dimension and position of the beam focus) is wavelength dependent. This is why for measurements that are performed with different wavelengths it is very important to change the curvature of the neutron guide in order to obtain optimal results. In this work we have designed, constructed and tested a guide where we can change the curvature during the experiment. In this way we can obtain a variable curvature in horizontal as well as in vertical direction. For a curvature in the horizontal or vertical direction it is not necessary to move all four walls, only two of the opposed plates. The element that changes the curvature of the guide consists of an acting element (piezomotor) as well as a rod that can be operated by the piezomotor and that acts through a lever onto the plate. The action of a force and a consecutive torsion momentum at the free end of the plate changes the curvature of the whole plate in an almost parabolic way. Making use of the Monte Carlo simulations we were able to determine the optimal curvature for each wavelength of a neutron guide for the spectrometer TOFTOF installed at the Forschungsneutronenquelle Heinz Maier-Leibnitz (FRM II). First tests have shown that with an adaptive focusing guide one can gain up to a factor three in intensity at

Design and tests of an adaptive focusing neutron guide

Energy Technology Data Exchange (ETDEWEB)

Valicu, Roxana Georgiana

2012-08-23

This work contains the Monte Carlo Simulations, as well as the first tests with an adaptive focusing neutron guide for creating a focus that does not depend on the wavelength of the incoming neutrons. All known neutron guides consist of a rectangular shape, built out of four glass plates. The inner side of the guide is coated with a complex structure of metal layers. This reflects and guides the neutrons (in analogy with the reflection of the light). For beam focusing neutron guides with fixed curvature can be built. For most experiments it is important that the beam is focused on to a small surface of the sample. In the case of focusing guides with fixed curvature it has been observed that the focusing (dimension and position of the beam focus) is wavelength dependent. This is why for measurements that are performed with different wavelengths it is very important to change the curvature of the neutron guide in order to obtain optimal results. In this work we have designed, constructed and tested a guide where we can change the curvature during the experiment. In this way we can obtain a variable curvature in horizontal as well as in vertical direction. For a curvature in the horizontal or vertical direction it is not necessary to move all four walls, only two of the opposed plates. The element that changes the curvature of the guide consists of an acting element (piezomotor) as well as a rod that can be operated by the piezomotor and that acts through a lever onto the plate. The action of a force and a consecutive torsion momentum at the free end of the plate changes the curvature of the whole plate in an almost parabolic way. Making use of the Monte Carlo simulations we were able to determine the optimal curvature for each wavelength of a neutron guide for the spectrometer TOFTOF installed at the Forschungsneutronenquelle Heinz Maier-Leibnitz (FRM II). First tests have shown that with an adaptive focusing guide one can gain up to a factor three in intensity at

Virtual design of the neutron guide for the TOF spectrometer NEAT

International Nuclear Information System (INIS)

Izaola, Zunbeltz; Russina, Margarita

2010-01-01

We present the results of a virtual design study based on Monte-Carlo neutron ray tracing techniques for the neutron guide of the time of flight (TOF) spectrometer NEAT. We studied several configurations with linearly or elliptically tapered compressors with different degrees of focusing and different guide coatings. The calculations were performed and crosschecked using two software packages which produced similar results. The geometrical arrangement of selected guide components was optimised with the Particle Swarm Optimisation algorithm. The results of the Monte Carlo simulations confirm an expected intensity gain factor of approximately 5, that can be achieved by the optimal configuration.

Virtual design of the neutron guide for the TOF spectrometer NEAT

Science.gov (United States)

Izaola, Zunbeltz; Russina, Margarita

2010-11-01

We present the results of a virtual design study based on Monte-Carlo neutron ray tracing techniques for the neutron guide of the time of flight (TOF) spectrometer NEAT. We studied several configurations with linearly or elliptically tapered compressors with different degrees of focusing and different guide coatings. The calculations were performed and crosschecked using two software packages which produced similar results. The geometrical arrangement of selected guide components was optimised with the Particle Swarm Optimisation algorithm. The results of the Monte Carlo simulations confirm an expected intensity gain factor of approximately 5, that can be achieved by the optimal configuration.

[Research on the designing method of a special shade guide for tooth whitening].

Science.gov (United States)

Xu, Yingxin

2015-10-01

To investigate a method of designing an accurate and scientific shade guide, especially used for judging the effect of tooth whitening, by analyzing the colorimetric values of discolored teeth statistically. One hundred thirty-six pictures of patients who had been receiving the Beyond cold light whitening treatment from February 2009 to July 2014 were analyzed, including 25 tetracycline teeth, 61 mottled-enamel teeth, and 50 yellow teeth. The colorimetric values of discolored teeth were measured. The L* values of shade tabs were calculated by hierarchical clustering of those of discolored teeth. The a* and b* values of shade tabs were the mean of those observed for discolored teeth. Accordingly, different shade guides were designed for each type of discolored teeth, and the effects were evaluated. A statistically significant difference in colorimetric values was found among the three types of discolored teeth. Compared with the Vitapan Classical shade guide, the shade guides designed through the present method were more scientific and accurate in judging the effect of tooth whitening. Moreover, the arrangement of shade tabs was more logical, and the color difference between shade tabs and discolored teeth was smaller. The proposed designing method is theoretically feasible, although its clinical effect has yet to be proven.

CRISPR library designer (CLD): software for multispecies design of single guide RNA libraries.

Science.gov (United States)

Heigwer, Florian; Zhan, Tianzuo; Breinig, Marco; Winter, Jan; Brügemann, Dirk; Leible, Svenja; Boutros, Michael

2016-03-24

Genetic screens using CRISPR/Cas9 are a powerful method for the functional analysis of genomes. Here we describe CRISPR library designer (CLD), an integrated bioinformatics application for the design of custom single guide RNA (sgRNA) libraries for all organisms with annotated genomes. CLD is suitable for the design of libraries using modified CRISPR enzymes and targeting non-coding regions. To demonstrate its utility, we perform a pooled screen for modulators of the TNF-related apoptosis inducing ligand (TRAIL) pathway using a custom library of 12,471 sgRNAs. CLD predicts a high fraction of functional sgRNAs and is publicly available at https://github.com/boutroslab/cld.

Design and experimental validation of the inlet guide vane system of a mini hydraulic bulb-turbine

Energy Technology Data Exchange (ETDEWEB)

Ferro, L.M.C. [Department of Mechanical Engineering, Escola Superior de Tecnologia de Setubal, Polytechnic Institute of Setubal, Campus do IPS, Estefanilha, 2910-761 Setubal (Portugal); IDMEC, Instituto Superior Tecnico, Technical University of Lisbon, Av. Rovisco Pais,1049-001 Lisboa (Portugal); Gato, L.M.C.; Falcao, A.F.O. [IDMEC, Instituto Superior Tecnico, Technical University of Lisbon, Av. Rovisco Pais,1049-001 Lisboa (Portugal)

2010-09-15

The paper presents a fast design method for the inlet guide vanes of low-cost mini hydraulic bulb turbines. The guide vanes are positioned between two conical surfaces with a common vertex and have constant thickness distribution, except close to the leading and the trailing edges. The conical-walled inlet guide vane row is designed using a quasi-three-dimensional calculation method, by prescribing the angular-momentum distribution along the span at the outlet section of the guide vanes. The meridional through-flow is computed by a streamline curvature method and the blade-to-blade flow by a singularity surface method. The stagger angle and the vane camber are computed to fulfil the required design circulation and zero-incidence flow at the leading edge. The final vane shape is a single-curvature surface with straight leading and trailing edges. To validate the design method, a conical-walled inlet guide vane row nozzle-model with six fixed vanes was designed, manufactured and tested in an airflow rig. Traversing measurements along the circumferential and radial directions were made with a five-hole probe. The experimental results are compared with the prescribed design conditions and with numerical results from the three-dimensional inviscid and viscous flow computed with the FLUENT code. (author)

Salt Repository Project shaft design guide: Revision 0

International Nuclear Information System (INIS)

1987-12-01

The Salt Repository Project (SRP) Shaft Design Guide (SDG) and the accompanying SRP Input to Seismic Design define the basic approach for developing appropriate shaft designs for a high-level nuclear waste repository in salt at a proposed site in Deaf Smith County, Texas. The SDG is based on current mining industry standards and practices enhanced to meet the special needs of an underground nuclear waste repository. It provides a common approach for design of both the exploratory and repository shafts. The SDG defines shaft lining and material concepts and presents methods for calculating the loads and displacements that will be imposed on lining structures. It also presents the methodology and formulae for sizing lining components. The SDG directs the shaft designer to sources of geoscience and seismic design data for the Deaf Smith County, Texas repository site. In addition, the SDG describes methods for confirming shaft lining design by means of computer analysis, and it discusses performance monitoring needs that must be considered in the design. 113 refs., 18 figs., 14 tabs

Design of the reactor coolant system and associated systems in nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2008-01-01

This Safety Guide was prepared under the IAEA programme for establishing safety standards for nuclear power plants. The basic requirements for the design of safety systems for nuclear power plants are established in the Safety Requirements publication, Safety Standards Series No. NS-R-1 on Safety of Nuclear Power Plants: Design, which it supplements. This Safety Guide describes how the requirements for the design of the reactor coolant system (RCS) and associated systems in nuclear power plants should be met. 1.2. This publication is a revision and combination of two previous Safety Guides, Safety Series No. 50-SG-D6 on Ultimate Heat Sink and Directly Associated Heat Transport Systems for Nuclear Power Plants (1981), and Safety Series No. 50-SG-D13 on Reactor Coolant and Associated Systems in Nuclear Power Plants (1986), which are superseded by this new Safety Guide. 1.3. The revision takes account of developments in the design of the RCS and associated systems in nuclear power plants since the earlier Safety Guides were published in 1981 and 1986, respectively. The other objectives of the revision are to ensure consistency with Ref., issued in 2000, and to update the technical content. In addition, an appendix on pressurized heavy water reactors (PHWRs) has been included

Design and optimization of surface profilometer based on coplanar guide rail

Science.gov (United States)

Chen, Shuai; Dai, Yifan; Hu, Hao; Tie, Guipeng

2017-10-01

In order to implement the sub-micron precision measurement, a surface profilometer which based on the coplanar guide rail is designed. This profilometer adopts the open type air floating load and is driven by the magnetic force. As to achieve sub-micron accuracy, the flatness of granite guide working face and aerodynamic block are both processed to the micron level based on the homogenization of air flotation film theory. Permanent magnet which could reduce the influence of the driving disturbance to the measurement accuracy is used as the driving part. In this paper, the bearing capacity and the air floating stiffness of air floating block are both simulated and analyzed as to optimize the design parameters firstly. The layout and magnetic force of the magnet are also simulated. According to the simulation results, type selection and the position arrangement of the magnets are then confirmed. The test results on the experimental platform show that the surface profilometer based on coplanar guide rail possess the basis for realizing the submicron precision measurement.

Radiation effects on electronic equipment: a designers'/users' guide for the nuclear power industry

International Nuclear Information System (INIS)

Sharp, R.E.; Garlick, D.R.

1994-01-01

The Designers'/Users' Guide to the effects of radiation on electronics is published by the Radiation Testing Service of AEA Technology. The aim of the Guide is to document the available information that we have generated and collected over some ten years whilst operating as a radiation effects and design consultancy to the nuclear power industry. We hope that this will enable workers within the industry better to understand the likely effects of radiation on the system or plant being designed and so minimise the problems that can arise. (Author)

Development of customized positioning guides using computer-aided design and manufacturing technology for orthognathic surgery.

Science.gov (United States)

Lin, Hsiu-Hsia; Chang, Hsin-Wen; Lo, Lun-Jou

2015-12-01

The purpose of this study was to devise a method for producing customized positioning guides for translating virtual plans to actual orthognathic surgery, and evaluation of the feasibility and validity of the devised method. Patients requiring two-jaw orthognathic surgery were enrolled and consented before operation. Two types of positioning guides were designed and fabricated using computer-aided design and manufacturing technology: One of the guides was used for the LeFort I osteotomy, and the other guide was used for positioning the maxillomandibular complex. The guides were fixed to the medial side of maxilla. For validation, the simulation images and postoperative cone beam computed tomography images were superimposed using surface registration to quantify the difference between the images. The data were presented in root-mean-square difference (RMSD) values. Both sets of guides were experienced to provide ideal fit and maximal contact to the maxillary surface to facilitate their accurate management in clinical applications. The validation results indicated that RMSD values between the images ranged from 0.18 to 0.33 mm in the maxilla and from 0.99 to 1.56 mm in the mandible. The patients were followed up for 6 months or more, and all of them were satisfied with the results. The proposed customized positioning guides are practical and reliable for translation of virtual plans to actual surgery. Furthermore, these guides improved the efficiency and outcome of surgery. This approach is uncomplicated in design, cost-effective in fabrication, and particularly convenient to use.

Distinctive Design A Practical Guide to a Useful, Beautiful Web

CERN Document Server

Dawson, Alexander

2011-01-01

Learn to produce a web site that stands out from the crowd One of the web designer's greatest challenges is to create a site distinctive enough to get noticed among the millions of sites already on the web. This book examines the bond between code, content and visuals to guide you through the factors that increase your design's visibility, usability and beauty. Using this practical advice, even web designers who lack strong artistic skills can develop super sites that strengthen the message and stand out from the crowd.Most books focus primarily on graphic design principles; this one shows you

Conditional survival of patients with diffuse large B-cell lymphoma

DEFF Research Database (Denmark)

Møller, Michael Boe; Pedersen, Niels Tinggaard; Christensen, Bjarne E

2006-01-01

BACKGROUND: Prognosis of lymphoma patients is usually estimated at the time of diagnosis and the estimates are guided by the International Prognostic Index (IPI). However, conditional survival estimates are more informative clinically, as they consider those patients only who have already survive...... survival probability provides more accurate prognostic information than the conventional survival rate estimated from the time of diagnosis.......BACKGROUND: Prognosis of lymphoma patients is usually estimated at the time of diagnosis and the estimates are guided by the International Prognostic Index (IPI). However, conditional survival estimates are more informative clinically, as they consider those patients only who have already survived...... a period of time after treatment. Conditional survival data have not been reported for lymphoma patients. METHODS: Conditional survival was estimated for 1209 patients with diffuse large B-cell lymphoma (DLBCL) from the population-based LYFO registry of the Danish Lymphoma Group. The Kaplan-Meier method...

Research and development on the hydraulic design system of the guide vanes of multistage centrifugal pumps

International Nuclear Information System (INIS)

Zhang, Q H; Xu, Y; Shi, W D; Lu, W G

2012-01-01

To improve the hydraulic design accuracy and efficiency of the guide vanes of the multistage centrifugal pumps, four different-structured guide vanes are investigated, and the design processes of those systems are established. The secondary development platforms of the ObjectArx2000 and the UG/NX OPEN are utilized to develop the hydraulic design systems of the guide vanes. The error triangle method is adopted to calculate the coordinates of the vanes, the profiles of the vanes are constructed by Bezier curves, and then the curves of the flow areas along the flow-path are calculated. Two-dimensional and three-dimensional hydraulic models can be developed by this system.

User Experience Re-Mastered Your Guide to Getting the Right Design

CERN Document Server

Wilson, Chauncey

2009-01-01

Good user interface design isn’t just about aesthetics or using the latest technology. Designers also need to ensure their product is offering an optimal user experience. This requires user needs analysis, usability testing, persona creation, prototyping, design sketching, and evaluation through-out the design and development process. User Experience Re-Mastered takes tried and tested material from best-selling books in Morgan Kaufmann’s Series in Interactive Technologies and presents it in typical project framework. Chauncey Wilson guides the reader through each chapter, introducing each stag

Design guide for heat transfer equipment in water-cooled nuclear reactor systems

International Nuclear Information System (INIS)

1975-07-01

Information pertaining to design methods, material selection, fabrication, quality assurance, and performance tests for heat transfer equipment in water-cooled nuclear reactor systems is given in this design guide. This information is intended to assist those concerned with the design, specification, and evaluation of heat transfer equipment for nuclear service and the systems in which this equipment is required. (U.S.)

Embroidered Electromyography: A Systematic Design Guide.

Science.gov (United States)

Shafti, Ali; Ribas Manero, Roger B; Borg, Amanda M; Althoefer, Kaspar; Howard, Matthew J

2017-09-01

Muscle activity monitoring or electromyography (EMG) is a useful tool. However, EMG is typically invasive, expensive and difficult to use for untrained users. A possible solution is textile-based surface EMG (sEMG) integrated into clothing as a wearable device. This is, however, challenging due to 1) uncertainties in the electrical properties of conductive threads used for electrodes, 2) imprecise fabrication technologies (e.g., embroidery, sewing), and 3) lack of standardization in design variable selection. This paper, for the first time, provides a design guide for such sensors by performing a thorough examination of the effect of design variables on sEMG signal quality. Results show that imprecisions in digital embroidery lead to a trade-off between low electrode impedance and high manufacturing consistency. An optimum set of variables for this trade-off is identified and tested with sEMG during a variable force isometric grip exercise with n = 12 participants, compared with conventional gel-based electrodes. Results show that thread-based electrodes provide a similar level of sensitivity to force variation as gel-based electrodes with about 90% correlation to expected linear behavior. As proof of concept, jogging leggings with integrated embroidered sEMG are made and successfully tested for detection of muscle fatigue while running on different surfaces.

Alarm systems a guide to design, management and procurement

CERN Document Server

Engineering Equipment and Materials Users' Association. London

2013-01-01

Alarm systems form an essential part of the operator interfaces to large modern industrial facilities. They provide vital support to the operators by warning them of situations that need their attention and have an important role in preventing, controlling and mitigating the effects of abnormal situations. Since it was first published in 1999, EEMUA 191 has become the globally accepted and leading guide to good practice for all aspects of alarm systems. The guide, developed by users of alarm systems with input from the GB Health and Safety Executive, gives comprehensive guidance on designing, managing and procuring an effective alarm system. The new Third Edition has been comprehensively updated and includes guidance on implementing the alarm management philosophy in practice; applications in geographically distributed processes; and performance metrics and KPIs.

Study Design and Data Gathering Guide for Serious Games’ Evaluation

NARCIS (Netherlands)

Baalsrud Hauge, Jannicke; Boyle, Elizabeth; Mayer, Igor; Nadolski, Rob; Riedel, Johann C. K. H.; Moreno-Ger, Pablo; Bellotti, Francesco; Lim, Theodore; Ritchie, James

2013-01-01

Baalsrud Hauge, J., Boyle, E., Mayer, I., Nadolski, R. J., Riedel, J. C. K. H., Moreno-Ger, P., Bellotti, F., Lim, T., & Ritchie, J. (2013). Study Design and Data Gathering Guide for Serious Games’ Evaluation. In T. M. Connolly, T. Hainey, E. Boyle, G. Baxter, & P. Moreno-Ger (Eds.), Psychology,

Guide-Plane Retention in Designing Removable Partial Dentures.

Science.gov (United States)

Mothopi-Peri, Matshediso; Owen, C Peter

To compare the influence of abutment teeth guide planes and guiding surfaces on retention of a removable partial denture (RPD). Extracted teeth embedded into a maxillary cast in the first premolar and second molar positions simulated two bounded saddles. Acrylic resin RPDs were made with no guide planes, then with guide planes, then with guiding surfaces added to directly contact the guide planes. The maximum loads on removal from the cast were recorded. There was a significant increase in retention force of 1.6 times when only guide planes were present and of 10.2 times when guiding surfaces intimately contacted the guide planes. The retention of acrylic resin RPDs can be substantially increased by making their guiding surfaces intimately contact the guide planes of the teeth.

Annual survival estimation of migratory songbirds confounded by incomplete breeding site-fidelity: study designs that may help

Directory of Open Access Journals (Sweden)

Marshall, M. R.

2004-06-01

Full Text Available Many species of bird exhibit varying degrees of site–fidelity to the previous year’s territory or breeding area, a phenomenon we refer to as incomplete breeding site–fidelity. If the territory they occupy is located beyond the bounds of the study area or search area (i.e., they have emigrated from the study area, the bird will go undetected and is therefore indistinguishable from dead individuals in capture–mark–recapture studies. Differential emigration rates confound inferences regarding differences in survival between sexes and among species if apparent survival rates are used as estimates of true survival. Moreover, the bias introduced by using apparent survival rates for true survival rates can have profound effects on the predictions of population persistence through time, source/sink dynamics, and other aspects of life–history theory. We investigated four study design and analysis approaches that result in apparent survival estimates that are closer to true survival estimates. Our motivation for this research stemmed from a multi–year capture–recapture study of Prothonotary Warblers (Protonotaria citrea on multiple study plots within a larger landscape of suitable breeding habitat where substantial inter–annual movements of marked individuals among neighboring study plots was documented. We wished to quantify the effects of this type of movement on annual survival estimation. The first two study designs we investigated involved marking birds in a core area and resighting them in the core as well as an area surrounding the core. For the first of these two designs, we demonstrated that as the resighting area surrounding the core gets progressively larger, and more “emigrants” are resighted, apparent survival estimates begin to approximate true survival rates (bias < 0.01. However, given observed inter–annual movements of birds, it is likely to be logistically impractical to resight birds on sufficiently large

Interface Heuristics and Style Guide Design: An Air Battle Management Case Study

National Research Council Canada - National Science Library

Nelson, W. T; Bolia, Robert S

2005-01-01

This paper describes the development of a human-machine interface style guide designed to promote a common look and feel among operator interfaces employed by air battle managers in the United States...

Methodology of Computer-Aided Design of Variable Guide Vanes of Aircraft Engines

Science.gov (United States)

Falaleev, Sergei V.; Melentjev, Vladimir S.; Gvozdev, Alexander S.

2016-01-01

The paper presents a methodology which helps to avoid a great amount of costly experimental research. This methodology includes thermo-gas dynamic design of an engine and its mounts, the profiling of compressor flow path and cascade design of guide vanes. Employing a method elaborated by Howell, we provide a theoretical solution to the task of…

Aircraft Crash Survival Design Guide. Volume 5. Aircraft Postcrash Survival

Science.gov (United States)

1980-01-01

neck Access door toprille capm enrFuel tank Figue 3. Fangblefiler eckinsalgbelati n. A-j L)n wal Aircraft skin Frangible filler neck Failure plane...This is because a number of major assumptions must be made in the extrapolation: the smoke generated is uniformly distri- buted and is independent

In vitro chemo-sensitivity assay guided chemotherapy is associated with prolonged overall survival in cancer patients.

Science.gov (United States)

Udelnow, Andrej; Schönfęlder, Manfred; Würl, Peter; Halloul, Zuhir; Meyer, Frank; Lippert, Hans; Mroczkowski, Paweł

2013-06-01

The overall survival (OS) of patients suffering From various tumour entities was correlated with the results of in vitro-chemosensitivity assay (CSA) of the in vivo applied drugs. Tumour specimen (n=611) were dissected in 514 patients and incubated for primary tumour cell culture. The histocytological regression assay was performed 5 days after adding chemotherapeutic substances to the cell cultures. n=329 patients undergoing chemotherapy were included in the in vitro/in vivo associations. OS was assessed and in vitro response groups compared using survival analysis. Furthermore Cox-regression analysis was performed on OS including CSA, age, TNM classification and treatment course. The growth rate of the primary was 73-96% depending on tumour entity. The in-vitro response rate varied with histology and drugs (e.g. 8-18% for methotrexate and 33-83% for epirubicine). OS was significantly prolonged for patients treated with in vitro effective drugs compared to empiric therapy (log-rank-test, p=0.0435). Cox-regression revealed that application of in vitro effective drugs, residual tumour and postoperative radiotherapy determined the death risk independently. When patients were treated with drugs effective in our CSA, OS was significantly prolonged compared to empiric therapy. CSA guided chemotherapy should be compared to empiric treatment by a prospective randomized trial.

Design of the reactor coolant system and associated systems in nuclear power plants. Safety guide (Spanish Edition)

International Nuclear Information System (INIS)

2010-01-01

This Safety Guide was prepared under the IAEA programme for establishing safety standards for nuclear power plants. The basic requirements for the design of safety systems for nuclear power plants are established in the Safety Requirements publication, Safety Standards Series No. NS-R-1 on Safety of Nuclear Power Plants: Design, which it supplements. This Safety Guide describes how the requirements for the design of the reactor coolant system (RCS) and associated systems in nuclear power plants should be met. This publication is a revision and combination of two previous Safety Guides, Safety Series No. 50-SG-D6 on Ultimate Heat Sink and Directly Associated Heat Transport Systems for Nuclear Power Plants (1982), and Safety Series No. 50-SG-D13 on Reactor Coolant and Associated Systems in Nuclear Power Plants (1987), which are superseded by this new Safety Guide. The revision takes account of developments in the design of the RCS and associated systems in nuclear power plants since the earlier Safety Guides were published in 1982 and 1987, respectively. The other objectives of the revision are to ensure consistency with Ref., issued in 2004, and to update the technical content. In addition, an appendix on pressurized heavy water reactors (PHWRs) has been included.

Detailed design of neutron guide tubes at the upgraded JRR-3, (1)

International Nuclear Information System (INIS)

Harami, Taikan; Umemura, Mutsumi; Ebisawa, Tohru.

1985-07-01

JRR-3, currently a heavy water moderated and cooled 10 MW reactor, is to be upgraded to a light water moderated and cooled, heavy water reflected 20 MW reactor. Two guide tubes for thermal neutron and three for cold will be installed in the reactor to transport thermal and cold neutrons from the reactor hall to the experiment hall. This describes the neutron guide tube transmission analysis program, NEUGT, which was developed to assess the design of the neutron guide tubes. The input data plotting program, PLOPINE and the output data plotting program, NEUPLOT are presented in the appendix. The NEUGT program not only calculates a neutron transmission and neutron spectra, assuming the Maxwellian spectra at the entrance of a guide tube, but also analyses the effect of abutment errors. This reports the description and the input data manual of the program in the text. Examples of analysis are given in the appendixes. The program is written in the FORTRAN 77 language for FACOM 380. (author)

Guide to radiological accident considerations for siting and design of DOE nonreactor nuclear facilities

International Nuclear Information System (INIS)

Elder, J.; Graf, J.M.

1984-01-01

DOE Office of Nuclear Safety has sponsored preparation of a guidance document to aid field offices and contractors in their analyses of consequences of postulated major accidents. The guide addresses the requirements of DOE Orders 5480.1A, Chapter V, and 6430.1, including the general requirement that DOE nuclear facilities be sited, designed, and operated in accordance with standards, codes, and guides consistent with those applied to comparable licensed nuclear facilities. The guide includes both philosophical and technical information in the areas of: siting guidelines doses applied to an offsite reference person; consideration also given to an onsite reference person; physical parameters, models, and assumptions to be applied when calculating doses for comparison to siting criteria; and potential accident consequences other than radiological dose to a reference person which might affect siting and major design features of the facility, such as environmental contamination, population dose, and associated public health effects. Recommendations and/or clarifications are provided where this could be done without adding new requirements. In this regard, the guide is considered a valuable aid to the safety analyst, especially where requirements have been subject to inconsistent interpretation or where analysis methods are in transition, such as use of dose model (ICRP 2 or ICRP 30) or use of probabilistic methods of risk analysis in the siting and design of nuclear facilities

Technical Support Document: The Development of the Advanced Energy Design Guide for Highway Lodging Buildings

Energy Technology Data Exchange (ETDEWEB)

Jiang, Wei; Jarnagin, Ronald E.; Gowri, Krishnan; McBride, M.; Liu, Bing

2008-09-30

This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Highway Lodgings (AEDG-HL or the Guide), a design guidance document intended to provide recommendations for achieving 30% energy savings in highway lodging properties over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-HL is the fifth in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the U.S. Department of Energy (DOE).

Classifier-guided sampling for discrete variable, discontinuous design space exploration: Convergence and computational performance

Energy Technology Data Exchange (ETDEWEB)

Backlund, Peter B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shahan, David W. [HRL Labs., LLC, Malibu, CA (United States); Seepersad, Carolyn Conner [Univ. of Texas, Austin, TX (United States)

2014-04-22

A classifier-guided sampling (CGS) method is introduced for solving engineering design optimization problems with discrete and/or continuous variables and continuous and/or discontinuous responses. The method merges concepts from metamodel-guided sampling and population-based optimization algorithms. The CGS method uses a Bayesian network classifier for predicting the performance of new designs based on a set of known observations or training points. Unlike most metamodeling techniques, however, the classifier assigns a categorical class label to a new design, rather than predicting the resulting response in continuous space, and thereby accommodates nondifferentiable and discontinuous functions of discrete or categorical variables. The CGS method uses these classifiers to guide a population-based sampling process towards combinations of discrete and/or continuous variable values with a high probability of yielding preferred performance. Accordingly, the CGS method is appropriate for discrete/discontinuous design problems that are ill-suited for conventional metamodeling techniques and too computationally expensive to be solved by population-based algorithms alone. In addition, the rates of convergence and computational properties of the CGS method are investigated when applied to a set of discrete variable optimization problems. Results show that the CGS method significantly improves the rate of convergence towards known global optima, on average, when compared to genetic algorithms.

Migrations and swimming capabilities of endangered pallid sturgeon (Scaphirhynchus albus) to guide passage designs in the fragmented Yellowstone River

Science.gov (United States)

Braaten, P. J.; Elliott, Caroline M.; Rhoten, Jason C.; Fuller, D. B.; McElroy, Brandon J.

2015-01-01

Fragmentation of the Yellowstone River is hypothesized to preclude recruitment of endangered Scaphirhynchus albus (pallid sturgeon) by impeding upstream spawning migrations and access to upstream spawning areas, thereby limiting the length of free-flowing river required for survival of early life stages. Building on this hypothesis, the reach of the Yellowstone River affected by Intake Diversion Dam (IDD) is targeted for modification. Structures including a rock ramp and by-pass channel have been proposed as restoration alternatives to facilitate passage. Limited information on migrations and swimming capabilities of pallid sturgeon is available to guide engineering design specifications for the proposed structures. Migration behavior, pathways (channel routes used during migrations), and swimming capabilities of free-ranging wild adult pallid sturgeon were examined using radiotelemetry, and complemented with hydraulic data obtained along the migration pathways. Migrations of 12–26% of the telemetered pallid sturgeon population persisted to IDD, but upstream passage over the dam was not detected. Observed migration pathways occurred primarily through main channel habitats; however, migrations through side channels up to 3.9 km in length were documented. The majority of pallid sturgeon used depths of 2.2–3.4 m and mean water velocities of 0.89–1.83 m/s while migrating. Results provide inferences on depths, velocities, and habitat heterogeneity of reaches successfully negotiated by pallid sturgeon that may be used to guide designs for structures facilitating passage at IDD. Passage will provide connectivity to potential upstream spawning areas on the Yellowstone River, thereby increasing the likelihood of recruitment for this endangered species.

Variation-Aware Design of Custom Integrated Circuits A Hands-on Field Guide A Hands-on Field Guide

CERN Document Server

McConaghy, Trent; Dyck, Jeffrey; Gupta, Amit

2013-01-01

This book targets custom IC designers who are encountering variation issues in their designs, especially for modern process nodes at 45nm and below, such as statistical process variations, environmental variations, and layout effects.  The authors have created a field guide to show how to handle variation proactively, and to understand the benefits of doing so. Readers facing variation challenges in their memory, standard cell, analog/RF, and custom digital designs will find easy-to-read, pragmatic solutions.   Reviews the most important concepts in variation-aware design, including types of variables and variation, useful variation-aware design terminology, and an overview and comparison of high-level design flows. Describes and compares a suite of approaches and flows for PVT corner-driven design and verification. Presents Fast PVT, a novel, confidence-driven global optimization technique for PVT corner extraction and verification that is both rapid and reliable. Presents a visually-oriented overview of ...

A Straight-Talk Survival Guide for Colleges

Science.gov (United States)

Facione, Peter A.

2009-01-01

Times are very tough. The great majority of colleges are looking at 2009 and 2010 and beyond, in anticipation of the deepest budget cuts in more than a generation. But as bad as the financial situation may be, colleges can survive if they take swift and strong emergency action. It is time for some straight talk, starting with the realization that…

Practical guide to organic field effect transistor circuit design

CERN Document Server

Sou, Antony

2016-01-01

The field of organic electronics spans a very wide range of disciplines from physics and chemistry to hardware and software engineering. This makes the field of organic circuit design a daunting prospect full of intimidating complexities, yet to be exploited to its true potential. Small focussed research groups also find it difficult to move beyond their usual boundaries and create systems-on-foil that are comparable with the established silicon world.This book has been written to address these issues, intended for two main audiences; firstly, physics or materials researchers who have thus far designed circuits using only basic drawing software; and secondly, experienced silicon CMOS VLSI design engineers who are already knowledgeable in the design of full custom transistor level circuits but are not familiar with organic devices or thin film transistor (TFT) devices.In guiding the reader through the disparate and broad subject matters, a concise text has been written covering the physics and chemistry of the...

Object-oriented design and programming with C++ your hands-on guide to C++ programming, with special emphasis on design, testing, and reuse

CERN Document Server

Leach, Ronald

2014-01-01

Object-Oriented Design and Programming with C++: Your Hands-On Guide to C++ Programming, with Special Emphasis on Design, Testing, and Reuse provides a list of software engineering principles to guide the software development process. This book presents the fundamentals of the C++ language.Organized into two parts encompassing 10 chapters, this book begins with an overview of C++ and describes object-oriented programming and the history of C++. This text then introduces classes, polymorphism, inheritance, and overloading. Other chapters consider the C++ preprocessor and organization of class l

Design of Instrumentation and Control Systems for Nuclear Power Plants. Specific Safety Guide

International Nuclear Information System (INIS)

2016-01-01

This publication is a revision and combination of two Safety Guides, IAEA Safety Standards Series No. NS-G-1.1 and No. NS-G-1.3. The revision takes into account developments in instrumentation and control (I&C) systems since the publication of the earlier Safety Guides. The main changes relate to the continuing development of computer applications and the evolution of the methods necessary for their safe, secure and practical use. In addition, account is taken of developments in human factors engineering and the need for computer security. This Safety Guide references and takes into account other IAEA Safety Standards and Nuclear Security Series publications that provide guidance relating to I&C design

Guided synthesis of accumulative solutions for the conceptual design of an efficient stove working with biomass

International Nuclear Information System (INIS)

Álvarez Cabrales, Alexis; Gaskins Espinosa, Benjamín Gabriel; Pérez Rodríguez, Roberto; Simeón Monet, Rolando Esteban

2014-01-01

The conceptual design is closely related to a product functional structure and the search of solution principles for its definition. This work exposes an accumulative method for the traceability of the functional structure that implements the guided conceptual synthesis of solutions in the preliminary analysis of this designing process stage. The method constitutes a contribution to Pahls and Beitzs classic design model. In it, the functional information system is manipulated, providing the designer with a help so that he can examine the different solutions that are obtained, giving him the possibility of selecting the most convenient one. The guided analysis of the accumulative solutions synthesis is illustrated by means of the conceptual design of an efficient stove working with biomass. (author)

Design and control of automated guided vehicle systems: A case study

NARCIS (Netherlands)

Li, Q.; Adriaansen, A.C.; Udding, J.T.; Pogromski, A.Y.

2011-01-01

In this paper, we study the design and control of automated guided vehicle (AGV) systems, with the focus on the quayside container transport in an automated container terminal. We first set up an event-driven model for an AGV system in the zone control framework. Then a number of layouts of the road

Guiding Design: Exposing Librarian and Student Mental Models of Research Guides

Science.gov (United States)

Sinkinson, Caroline; Alexander, Stephanie; Hicks, Alison; Kahn, Meredith

2012-01-01

This article details an open card sort study administered to undergraduate students, graduate students, and librarians at the University of Colorado at Boulder in order to reveal perceptions of library research guides. The study identifies user group preferences for organization and content of research guides, as well as themes emerging from the…

Technical Support Document: The Development of the Advanced Energy Design Guide for Small Retail Buildings

Energy Technology Data Exchange (ETDEWEB)

Liu, Bing; Jarnagin, Ronald E.; Winiarski, David W.; Jiang, Wei; McBride, Merle F.; Crall, C.

2006-09-30

The Advanced Energy Design Guide for Small Retail Buildings (AEDG-SR) was developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the Department of Energy (DOE). The guide is intended to offer recommendations to achieve 30% energy savings and thus to encourage steady progress towards net-zero energy buildings. The baseline level energy use was set at buildings built at the turn of the millennium, which are assumed to be based on ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings (refer to as the ?Standard? in this report). ASHRAE and its partners are engaged in the development of a series of guides for small commercial buildings, with the AEDG-SR being the second in the series. Previously the partnership developed the Advanced Energy Design Guide for Small Office Buildings: Achieving 30% Energy Savings Over ANSI/ASHRAE/IESNA Standard 90.1-1999, which was published in late 2004. The technical support document prepared by PNNL details how the energy analysis performed in support of the Guide and documents development of recommendation criteria.

Technical Support Document: Development of the Advanced Energy Design Guide for Small Office Buildings

Energy Technology Data Exchange (ETDEWEB)

Jarnagin, Ronald E.; Liu, Bing; Winiarski, David W.; McBride, Merle F.; Suharli, L.; Walden, D.

2006-11-30

This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for Small Office Buildings (AEDG-SO), a design guidance document intended to provide recommendations for achieving 30% energy savings in small office buildings over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-SO is the first in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the New Buildings Institute (NBI), and the U.S. Department of Energy (DOE). Each of the guides in the AEDG series will provide recommendations and user-friendly design assistance to designers, developers and owners of small commercial buildings that will encourage steady progress towards net-zero energy buildings. The guides will provide prescriptive recommendation packages that are capable of reaching the energy savings target for each climate zone in order to ease the burden of the design and construction of energy-efficient small commercial buildings The AEDG-SO was developed by an ASHRAE Special Project committee (SP-102) made up of representatives of each of the partner organizations in eight months. This TSD describes the charge given to the committee in developing the office guide and outlines the schedule of the development effort. The project committee developed two prototype office buildings (5,000 ft2 frame building and 20,000 ft2 two-story mass building) to represent the class of small office buildings and performed an energy simulation scoping study to determine the preliminary levels of efficiency necessary to meet the energy savings target. The simulation approach used by the project committee is documented in this TSD along with

Promoting, Guiding, and Surviving Change in School Districts.

Science.gov (United States)

Deal, Terrence E.; Nutt, Samuel C.

Compiled for school administrators who must initiate or respond to external mandate for change, this guide draws on the experiences of 10 rural school districts that participated in the federally funded Experimental Schools (ES) program for perspectives that can be used in the successful management of change efforts in school districts. Organized…

Guided Design: Sensitivity to Black-White Interactions When Giving Nursing Care.

Science.gov (United States)

Fernandez, Theresa M.

This paper discusses the use of guided design with white student nurses at the Medical College of Virginia Nursing School to help them develop an awareness of and reduce stereotypic responses when they are providing nursing care to black patients. The need for this type of training for both faculty and students is discussed, a series of seminars…

Safety Software Guide Perspectives for the Design of New Nuclear Facilities (U)

International Nuclear Information System (INIS)

VINCENT, Andrew

2005-01-01

software. The discussion provided herein illustrates benefits of applying the Safety Software Guide to work activities dependent on software applications and directed toward the design of new nuclear facilities. In particular, the Guide-based systematic approach with software enables design processes to effectively proceed and reduce the likelihood of rework activities. Several application examples are provided for the new facility

Design Guide for Earth System Science Education: Common Student Learning Objectives and Special Pedagogical Approaches

Science.gov (United States)

Baker, D.

2006-12-01

As part of the NASA-supported undergraduate Earth System Science Education (ESSE) program, fifty-seven institutions have developed and implemented a wide range of Earth system science (ESS) courses, pedagogies, and evaluation tools. The Teaching, Learning, and Evaluation section of USRA's online ESSE Design Guide showcases these ESS learning environments. This Design Guide section also provides resources for faculty who wish to develop ESS courses. It addresses important course design issues including prior student knowledge and interests, student learning objectives, learning resources, pedagogical approaches, and assessments tied to student learning objectives. The ESSE Design Guide provides links to over 130 ESS course syllabi at introductory, senior, and graduate levels. ESS courses over the past 15 years exhibit common student learning objectives and unique pedagogical approaches. From analysis of ESS course syllabi, seven common student learning objectives emerged: 1) demonstrate systems thinking, 2) develop an ESS knowledge base, 3) apply ESS to the human dimension, 4) expand and apply analytical skills, 5) improve critical thinking skills, 6) build professional/career skills, and 7) acquire an enjoyment and appreciation for science. To meet these objectives, ESSE often requires different ways of teaching than in traditional scientific disciplines. This presentation will highlight some especially successful pedagogical approaches for creating positive and engaging ESS learning environments.

Learning Survival Models with On-Line Simulation Activities in the Actuarial Science Degree

Directory of Open Access Journals (Sweden)

Antonio Fernandez-Morales

2011-03-01

Full Text Available The aim of this paper is to describe an on-line survival laboratory designed to enhance teaching and learning in the Statistics courses of the Actuarial Science Degree of the Uni-versity of Málaga. The objective of the on-line survival lab is to help students through a guided program of simulation activities with the understanding of the most important statistical concepts of the stochastic modeling of human survival, from an Actuarial point of view. The graphical interactive simulator is implemented as Java applets for the web version, and as a Javascript animation for a lite iPhone/iPod touch version. Finally, the results of a survey carried out at the end of the course are discussed to have a preliminary assessment of the students’ satisfaction with the resources, and their perception about the usefulness for their learning process.

Design report on the guide box-reactivity and safety control plates for MPR reactor under normal operation conditions

International Nuclear Information System (INIS)

Markiewicz, M.

1999-01-01

The reactivity control system for the MPR reactor (Multi Purpose Reactor) is a critical component regarding safety, it must ensure a fast shut down, maintaining the reactor in subcritical condition under normal or accidental operation condition. For this purpose, this core component must be designed to maintain its operating capacity during all the residence time and under any foreseen operation condition. The mechanical design of control plates and guide boxes must comply with structural integrity, maintaining its geometric and dimensional stability within the pre-established limits to prevent interferences with other core components. For this, the heat generation effect, mechanical loads and environment and irradiation effects were evaluated during the mechanical design. The reactivity control system is composed of guide boxes, manufactured from Aluminium alloy, located between the fuel elements, and control absorber plates of Ag-In-Cd alloy hermetically enclosed by a cladding of stainless steel sliding inside de guide boxes. The upward-downward movement is transmitted by a rod from the motion device located at the reactor lower part. The design requirements, criteria and limits were established to fulfill with the normal and abnormal operation conditions. The design verifications were performed by analytical method, estimating the guide box and control plates residence time. The result of the analysis performed, shows that the design of the reactivity control system and the material selected, are appropriate to fulfill the functional requirements, with no failures attributed to the mechanical design. (author)

Novel study guides for biochemistry meaningful learning in biology: a design-based research

Directory of Open Access Journals (Sweden)

Caetano da Costa

2017-12-01

Full Text Available To address the usually decontextualized transmission of information in biochemistry teaching, three interventions in a discipline (Metabolism for Biology majors were applied as innovative study guides. We describe the development, application, and evaluation of two study guides, contextualized with a real problem or an integrative view, using broad themes like evolution and metabolic adaptation. In order to evaluate the impact of both interventions on interest, motivation, and learning of the metabolic pathways, a design-based research with cycles of application and assessment was carried out, by means of classroom observation, grade analysis in written exams, and students’ interviews. Analysis and interpretation of the results point to benefits for teaching and learning, with helpful information to guide elaboration and refinement of new teaching materials and to make active learning more meaningful.

Breaking-Cas—interactive design of guide RNAs for CRISPR-Cas experiments for ENSEMBL genomes

Science.gov (United States)

Oliveros, Juan C.; Franch, Mònica; Tabas-Madrid, Daniel; San-León, David; Montoliu, Lluis; Cubas, Pilar; Pazos, Florencio

2016-01-01

The CRISPR/Cas technology is enabling targeted genome editing in multiple organisms with unprecedented accuracy and specificity by using RNA-guided nucleases. A critical point when planning a CRISPR/Cas experiment is the design of the guide RNA (gRNA), which directs the nuclease and associated machinery to the desired genomic location. This gRNA has to fulfil the requirements of the nuclease and lack homology with other genome sites that could lead to off-target effects. Here we introduce the Breaking-Cas system for the design of gRNAs for CRISPR/Cas experiments, including those based in the Cas9 nuclease as well as others recently introduced. The server has unique features not available in other tools, including the possibility of using all eukaryotic genomes available in ENSEMBL (currently around 700), placing variable PAM sequences at 5′ or 3′ and setting the guide RNA length and the scores per nucleotides. It can be freely accessed at: http://bioinfogp.cnb.csic.es/tools/breakingcas, and the code is available upon request. PMID:27166368

Review on conformance of JMTR reactor facility to safety design examination guides for water-cooled reactors for test and research

International Nuclear Information System (INIS)

Ide, Hiroshi; Naka, Michihiro; Sakuta, Yoshiyuki; Hori, Naohiko; Matsui, Yoshinori; Miyazawa, Masataka

2009-03-01

The safety design examination guides for water-cooled reactors for test and research are formulated as fundamental judgements on the basic design validity for licensing from a viewpoint of the safety. Taking the refurbishment opportunity of the JMTR, the conformance of the JMTR reactor facility to current safety design examination guides was reviewed with licensing documents, annexes and related documents. As a result, it was found that licensing documents fully satisfied the requirements of the current guides. Moreover, it was found that the JMTR reactor facility itself also satisfied the guides requirements as well as the safety performance, since the facility with safety function such as structure, systems, devices had been installed based on the licensing documents under the permission by the regulation authority. Important devices for safety have been produced under authorization of regulating authority. Therefore, it was confirmed that the licensing was conformed to guides, and that the JMTR has enough performance. (author)

Combined CT-guided radiofrequency ablation with systemic chemotherapy improves the survival for nasopharyngeal carcinoma with oligometastasis in liver: Propensity score matching analysis.

Science.gov (United States)

Li, Wang; Bai, Yutong; Wu, Ming; Shen, Lujun; Shi, Feng; Sun, Xuqi; Lin, Caijin; Chang, Boyang; Pan, Changchuan; Li, Zhiwen; Wu, Peihong

2017-08-08

The aim of this study was to retrospectively compare the treatment efficacy of systemic chemotherapy combined with sequential CT-guided radiofrequency ablation (Chemo-RFA) to chemotherapy alone (Chemo-only) in the management of nasopharyngeal carcinoma (NPC) with liver metastasis. Between 2003 and 2011, 328 NPC patients diagnosed with liver metastasis at Sun Yat-sen University Cancer Center were enrolled. One-to-one matched pairs between Chemo-RFA group with the Chemo-only group were generated using propensity score matching. The associations of treatment modality with overall survival (OS) and progression-free survival (PFS) were determined by Cox regression. Of the patients enrolled, 37 patients (11.8 %) received combined treatment, 291 (82.2) received chemotherapy alone. The patients in Chemo-RFA group were more frequently classified as lower number (≤3) of liver metastatic lesions (Poligometastasis in liver, and should be considered if the ablation is technically feasible.

Guide to radiological accident considerations for siting and design of DOE nonreactor nuclear facilities

International Nuclear Information System (INIS)

Elder, J.C.; Graf, J.M.; Dewart, J.M.; Buhl, T.E.; Wenzel, W.J.; Walker, L.J.; Stoker, A.K.

1986-01-01

This guide was prepared to provide the experienced safety analyst with accident analysis guidance in greater detail than is possible in Department of Energy (DOE) Orders. The guide addresses analysis of postulated serious accidents considered in the siting and selection of major design features of DOE nuclear facilities. Its scope has been limited to radiological accidents at nonreactor nuclear facilities. The analysis steps addressed in the guide lead to evaluation of radiological dose to exposed persons for comparison with siting guideline doses. Other possible consequences considered are environmental contamination, population dose, and public health effects. Choices of models and parameters leading to estimation of source terms, release fractions, reduction and removal factors, dispersion and dose factors are discussed. Although requirements for risk analysis have not been established, risk estimates are finding increased use in siting of major nuclear facilities, and are discussed in the guide. 3 figs., 9 tabs

Strand V: Education for Survival. First Aid and Survival Education. Health Curriculum Materials Grades 10-12.

Science.gov (United States)

New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

GRADES OR AGES: Grades 10-12. SUBJECT MATTER: First aid and survival education. ORGANIZATION AND PHYSICAL APPEARANCE: The guide is divided into six sections: transportation of the injured, automobile accidents, conditions resulting from nuclear explosion, chemical warfare, natural catastrophes, and psychological first aid. The publication format…

Agent-Oriented Embedded Control System Design and Development of a Vision-Based Automated Guided Vehicle

Directory of Open Access Journals (Sweden)

Wu Xing

2012-07-01

Full Text Available This paper presents a control system design and development approach for a vision-based automated guided vehicle (AGV based on the multi-agent system (MAS methodology and embedded system resources. A three-phase agent-oriented design methodology Prometheus is used to analyse system functions, construct operation scenarios, define agent types and design the MAS coordination mechanism. The control system is then developed in an embedded implementation containing a digital signal processor (DSP and an advanced RISC machine (ARM by using the multitasking processing capacity of multiple microprocessors and system services of a real-time operating system (RTOS. As a paradigm, an onboard embedded controller is designed and developed for the AGV with a camera detecting guiding landmarks, and the entire procedure has a high efficiency and a clear hierarchy. A vision guidance experiment for our AGV is carried out in a space-limited laboratory environment to verify the perception capacity and the onboard intelligence of the agent-oriented embedded control system.

Real-time solar magnetograph operation system software design and user's guide

Science.gov (United States)

Wang, C.

1984-01-01

The Real Time Solar Magnetograph (RTSM) Operation system software design on PDP11/23+ is presented along with the User's Guide. The RTSM operation software is for real time instrumentation control, data collection and data management. The data is used for vector analysis, plotting or graphics display. The processed data is then easily compared with solar data from other sources, such as the Solar Maximum Mission (SMM).

Invited review article: high-speed flexure-guided nanopositioning: mechanical design and control issues.

Science.gov (United States)

Yong, Y K; Moheimani, S O R; Kenton, B J; Leang, K K

2012-12-01

Recent interest in high-speed scanning probe microscopy for high-throughput applications including video-rate atomic force microscopy and probe-based nanofabrication has sparked attention on the development of high-bandwidth flexure-guided nanopositioning systems (nanopositioners). Such nanopositioners are designed to move samples with sub-nanometer resolution with positioning bandwidth in the kilohertz range. State-of-the-art designs incorporate uniquely designed flexure mechanisms driven by compact and stiff piezoelectric actuators. This paper surveys key advances in mechanical design and control of dynamic effects and nonlinearities, in the context of high-speed nanopositioning. Future challenges and research topics are also discussed.

Review of factors affecting the growth and survival of follicular grafts

Directory of Open Access Journals (Sweden)

William M Parsley

2010-01-01

Full Text Available Great strides have been made in hair restoration over the past 20 years. A better understanding of natural balding and non-balding patterns along with more respect for ageing has helped guide proper hairline design. Additionally, the use of smaller grafts has created a significantly improved natural appearance to the transplanted grafts. Inconsistent growth and survival of follicular grafts, however, has continued to be a problem that has perplexed hair restoration surgeons. This review attempts to explore the stresses affecting grafts during transplantation and some of the complexities involved in graft growth and survival. These authors reviewed the literature to determine the primary scope of aspects influencing growth and survival of follicular grafts. This scope includes patient selection, operating techniques, graft care, storage solutions and additives. The primary focus of the hair restoration surgeons should first be attention to the fundamentals of hair care, hydration, temperature, time out of body and gentle handling. Factors such as advanced storage solutions and additives can be helpful once the fundamentals have been addressed.

Human-system interface design review guideline -- Review software and user's guide: Final report. Revision 1, Volume 3

International Nuclear Information System (INIS)

1996-06-01

NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant's HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 3 contains an interactive software application of the NUREG-0700, Revision 1 guidance and a user's guide for this software. The software supports reviewers during review preparation, evaluation design using the human factors engineering guidelines, and in report preparation. The user's guide provides system requirements and installation instructions, detailed explanations of the software's functions and features, and a tutorial on using the software

Guided-Inquiry Labs Using Bean Beetles for Teaching the Scientific Method & Experimental Design

Science.gov (United States)

Schlueter, Mark A.; D'Costa, Allison R.

2013-01-01

Guided-inquiry lab activities with bean beetles ("Callosobruchus maculatus") teach students how to develop hypotheses, design experiments, identify experimental variables, collect and interpret data, and formulate conclusions. These activities provide students with real hands-on experiences and skills that reinforce their understanding of the…

In-vitro study on the accuracy of a simple-design CT-guided stent for dental implants

International Nuclear Information System (INIS)

Huh, Young June; Choi, Bo Ram; Huh, Kyung Hoe; Yi, Won Jin; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul

2012-01-01

An individual surgical stent fabricated from computed tomography (CT) data, called a CT-guided stent, would be useful for accurate installation of implants. The purpose of the present study was to introduce a newly developed CT-guided stent with a simple design and evaluate the accuracy of the stent placement. A resin template was fabricated from a hog mandible and a specially designed plastic plate, with 4 metal balls inserted in it for radiographic recognition, was attached to the occlusal surface of the template. With the surgical stent applied, CT images were taken, and virtual implants were placed using software. The spatial positions of the virtually positioned implants were acquired and implant guiding holes were drilled into the surgical stent using a specially designed 5-axis drilling machine. The surgical stent was placed on the mandible and CT images were taken again. The discrepancy between the central axis of the drilled holes on the second CT images and the virtually installed implants on the first CT images was evaluated. The deviation of the entry point and angulation of the central axis in the reference plane were 0.47±0.27 mm, 0.57±0.23 mm, and 0.64±0.16 degree, 0.57±0.15 degree, respectively. However, for the two different angulations in each group, the 20 degree angulation showed a greater error in the deviation of the entry point than did the 10 degree angulation. The CT-guided template proposed in this study was highly accurate. It could replace existing implant guide systems to reduce costs and effort.

77 FR 64564 - Implementation of Regulatory Guide 1.221 on Design-Basis Hurricane and Hurricane Missiles

Science.gov (United States)

2012-10-22

...-Basis Hurricane and Hurricane Missiles AGENCY: Nuclear Regulatory Commission. ACTION: Proposed interim...-ISG-024, ``Implementation of Regulatory Guide 1.221 on Design-Basis Hurricane and Hurricane Missiles....221, ``Design-Basis Hurricane and Hurricane Missiles for Nuclear Power Plants.'' DATES: Submit...

Novel implant design improves implant survival in multirooted extraction sites: a preclinical pilot study.

Science.gov (United States)

Sivan-Gildor, Adi; Machtei, Eli E; Gabay, Eran; Frankenthal, Shai; Levin, Liran; Suzuki, Marcelo; Coelho, Paulo G; Zigdon-Giladi, Hadar

2014-10-01

The primary aim is to evaluate clinical, radiographic, and histologic parameters of novel implants with "three roots" design that were inserted into fresh multirooted extraction sockets. A secondary aim is to compare this new implant to standard root-form dental implants. Immediate implantation of novel or standard design 6 × 6-mm implants was performed bilaterally into multirooted sockets in mandibles of mini-pigs. Twelve weeks later, clinical, radiographic, stability, histomorphometric, and microcomputed tomography (micro-CT) analyses were performed. Survival rates were significantly higher in the test implants compared with control (92.8% versus 33.3%, respectively; P micro-CT analyses demonstrated bone fill in the inner part of the test implants. Moreover, bone-to-implant contact was higher in the test implants (55.50% ± 3.68% versus 42.47% ± 9.89%). Contrary to the clinical, radiographic, and histomorphometric results, resonance frequency analysis measurements were greater in the control group (77.74 ± 3.21 implant stability quotient [ISQ]) compared with the test group (31.09 ± 0.28 ISQ), P = 0.008. The novel design implants resulted in significantly greater survival rate in multirooted extraction sites. Further studies will be required to validate these findings.

Design of pressurized water reactors - Guide Nr 22, Release of the 18/07/2017

International Nuclear Information System (INIS)

2017-01-01

Jointly developed by the ASN and IRSN, this guide takes safety requirements for reactor design as defined by the IAEA, and reference levels, safety objectives and recommendations made by the WENRA into account. It addresses aspects related to installation design based on an appropriate application of the in-depth defence principle, as well as aspects related to the nuclear safety demonstration of a design. After an introduction which notably contains specific definitions, this guide presents general design objectives and principles: normal operation, possible incidents and accidents, in-depth defence, barriers, functions aiming at preventing incidents or accidents, general approach to nuclear safety demonstration. It addresses the issue of nuclear safety demonstration: identification and taking into account of events which may affect nuclear safety, reference operating conditions, reference internal and external aggressions excluding malevolent acts, the case of malevolent acts, use of probabilistic safety studies, principles of development of study methods. It presents general recommendations related to design: architecture of safety functions, EIP design, organisational and human dimensions, radiation protection. It also presents, specific recommendations related to barrier design (reactor core and associated devices, primary and secondary circuits, barrier), and to some safety functions (control of chain reactions, confinement of radioactive substances). It finally addresses other specific recommendations related to design: heat evacuation, electricity supply, volumetric and chemical control of the primary coolant, handling and warehousing of nuclear fuel, control and command, crisis management, and management of effluents and of radioactive wastes

Network survivability performance

Science.gov (United States)

1993-11-01

This technical report has been developed to address the survivability of telecommunications networks including services. It responds to the need for a common understanding of, and assessment techniques for network survivability, availability, integrity, and reliability. It provides a basis for designing and operating telecommunications networks to user expectations for network survivability and a foundation for continuing industry activities in the subject area. This report focuses on the survivability of both public and private networks and covers a wide range of users. Two frameworks are established for quantifying and categorizing service outages, and for classifying network survivability techniques and measures. The performance of the network survivability techniques is considered; however, recommended objectives are not established for network survivability performance.

Design of pre-optics for laser guide star wavefront sensor for the ELT

Science.gov (United States)

Muslimov, Eduard; Dohlen, Kjetil; Neichel, Benoit; Hugot, Emmanuel

2017-12-01

In the present paper, we consider the optical design of a zoom system for the active refocusing in laser guide star wavefront sensors. The system is designed according to the specifications coming from the Extremely Large Telescope (ELT)-HARMONI instrument, the first-light, integral field spectrograph for the European (E)-ELT. The system must provide a refocusing of the laser guide as a function of telescope pointing and large decentring of the incoming beam. The system considers four moving lens groups, each of them being a doublet with one aspherical surface. The advantages and shortcomings of such a solution in terms of the component displacements and complexity of the surfaces are described in detail. It is shown that the system can provide the median value of the residual wavefront error of 13.8-94.3 nm and the maximum value <206 nm, while the exit pupil distortion is 0.26-0.36% for each of the telescope pointing directions.

Radiation protection aspects of design for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

. The IAEA takes seriously the enduring challenge for users and regulators everywhere: that of ensuring a high level of safety in the use of nuclear materials and radiation sources around the world. Their continuing utilization for the benefit of humankind must be managed in a safe manner, and the IAEA safety standards are designed to facilitate the achievement of that goal. This Safety Guide has been prepared as a part of the IAEA programme on safety standards for nuclear power plants. It includes recommendations on how to satisfy the requirements established in the Safety Requirements publication on the Safety of Nuclear Power Plants: Design. It addresses the provisions that should be made in the design of nuclear power plants in order to protect site personnel, the public and the environment against radiological hazards for operational states, decommissioning and accident conditions. The recommendations on radiation protection provided in this Safety Guide are consistent with the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), which were jointly sponsored by the Food and Agriculture Organization of the United Nations (FAO), the IAEA, the International Labour Organisation (ILO), the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO) and the World Health Organization (WHO). This Safety Guide supersedes Safety Series No. 50-SG-D9, Design Aspects of Radiation Protection for Nuclear Power Plants, published in 1985. Effective radiation protection is a combination of good design, high quality construction and proper operation. Procedures that address the radiation protection aspects of operation are covered in the Safety Guide on Radiation Protection and Radioactive Waste Management in the operation of Nuclear Power Plants

Technical procedures for template-guided surgery for mandibular reconstruction based on digital design and manufacturing.

Science.gov (United States)

Liu, Yun-feng; Xu, Liang-wei; Zhu, Hui-yong; Liu, Sean Shih-Yao

2014-05-23

The occurrence of mandibular defects caused by tumors has been continuously increasing in China in recent years. Conversely, results of the repair of mandibular defects affect the recovery of oral function and patient appearance, and the requirements for accuracy and high surgical quality must be more stringent. Digital techniques--including model reconstruction based on medical images, computer-aided design, and additive manufacturing--have been widely used in modern medicine to improve the accuracy and quality of diagnosis and surgery. However, some special software platforms and services from international companies are not always available for most of researchers and surgeons because they are expensive and time-consuming. Here, a new technical solution for guided surgery for the repair of mandibular defects is proposed, based on general popular tools in medical image processing, 3D (3 dimension) model reconstruction, digital design, and fabrication via 3D printing. First, CT (computerized tomography) images are processed to reconstruct the 3D model of the mandible and fibular bone. The defect area is then replaced by healthy contralateral bone to create the repair model. With the repair model as reference, the graft shape and cutline are designed on fibular bone, as is the guide for cutting and shaping. The physical model, fabricated via 3D printing, including surgical guide, the original model, and the repair model, can be used to preform a titanium locking plate, as well as to design and verify the surgical plan and guide. In clinics, surgeons can operate with the help of the surgical guide and preformed plate to realize the predesigned surgical plan. With sufficient communication between engineers and surgeons, an optimal surgical plan can be designed via some common software platforms but needs to be translated to the clinic. Based on customized models and tools, including three surgical guides, preformed titanium plate for fixation, and physical models of

Crystal-Structure-Guided Design of Self-Assembling RNA Nanotriangles.

Science.gov (United States)

Boerneke, Mark A; Dibrov, Sergey M; Hermann, Thomas

2016-03-14

RNA nanotechnology uses RNA structural motifs to build nanosized architectures that assemble through selective base-pair interactions. Herein, we report the crystal-structure-guided design of highly stable RNA nanotriangles that self-assemble cooperatively from short oligonucleotides. The crystal structure of an 81 nucleotide nanotriangle determined at 2.6 Å resolution reveals the so-far smallest circularly closed nanoobject made entirely of double-stranded RNA. The assembly of the nanotriangle architecture involved RNA corner motifs that were derived from ligand-responsive RNA switches, which offer the opportunity to control self-assembly and dissociation. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Survival of falling robots

Science.gov (United States)

Cameron, Jonathan M.; Arkin, Ronald C.

1992-01-01

As mobile robots are used in more uncertain and dangerous environments, it will become important to design them so that they can survive falls. In this paper, we examine a number of mechanisms and strategies that animals use to withstand these potentially catastrophic events and extend them to the design of robots. A brief survey of several aspects of how common cats survive falls provides an understanding of the issues involved in preventing traumatic injury during a falling event. After outlining situations in which robots might fall, a number of factors affecting their survival are described. From this background, several robot design guidelines are derived. These include recommendations for the physical structure of the robot as well as requirements for the robot control architecture. A control architecture is proposed based on reactive control techniques and action-oriented perception that is geared to support this form of survival behavior.

Survival of falling robots

Science.gov (United States)

Cameron, Jonathan M.; Arkin, Ronald C.

1992-02-01

As mobile robots are used in more uncertain and dangerous environments, it will become important to design them so that they can survive falls. In this paper, we examine a number of mechanisms and strategies that animals use to withstand these potentially catastrophic events and extend them to the design of robots. A brief survey of several aspects of how common cats survive falls provides an understanding of the issues involved in preventing traumatic injury during a falling event. After outlining situations in which robots might fall, a number of factors affecting their survival are described. From this background, several robot design guidelines are derived. These include recommendations for the physical structure of the robot as well as requirements for the robot control architecture. A control architecture is proposed based on reactive control techniques and action-oriented perception that is geared to support this form of survival behavior.

Design and use of guided mode resonance filters for refractive index sensing

DEFF Research Database (Denmark)

Hermannsson, Pétur Gordon

This Ph.D. thesis is concerned with the design and use of guided mode resonance filters (GMRF) for applications in refractive index sensing. GMRFs are optical nanostructures capable of efficiently and resonantly reflecting a narrow wavelength interval of incident broad band light. They combine...... to changes in refractive index that occur within the region overlapped by the quasi guided mode, and GMRFs are thus well suited for optical sensing and tunable filter applications. They produce a polarization dependent response and can be optically characterized in both reflection and transmission......, a lift-off process, and reactive ion etching. After an introduction to the history and principles of GMRFs, the thesis describes the state-of-the-art of relevant research in the field, covers the necessary theoretical background required to understand their operation, and discusses the fabrication...

Masked Visual Analysis: Minimizing Type I Error in Visually Guided Single-Case Design for Communication Disorders

Science.gov (United States)

Byun, Tara McAllister; Hitchcock, Elaine R.; Ferron, John

2017-01-01

Purpose: Single-case experimental designs are widely used to study interventions for communication disorders. Traditionally, single-case experiments follow a response-guided approach, where design decisions during the study are based on participants' observed patterns of behavior. However, this approach has been criticized for its high rate of…

Vision Guided Intelligent Robot Design And Experiments

Science.gov (United States)

Slutzky, G. D.; Hall, E. L.

1988-02-01

The concept of an intelligent robot is an important topic combining sensors, manipulators, and artificial intelligence to design a useful machine. Vision systems, tactile sensors, proximity switches and other sensors provide the elements necessary for simple game playing as well as industrial applications. These sensors permit adaption to a changing environment. The AI techniques permit advanced forms of decision making, adaptive responses, and learning while the manipulator provides the ability to perform various tasks. Computer languages such as LISP and OPS5, have been utilized to achieve expert systems approaches in solving real world problems. The purpose of this paper is to describe several examples of visually guided intelligent robots including both stationary and mobile robots. Demonstrations will be presented of a system for constructing and solving a popular peg game, a robot lawn mower, and a box stacking robot. The experience gained from these and other systems provide insight into what may be realistically expected from the next generation of intelligent machines.

Guide to safe work : fatigue management : an employer's guide to designing and implementing a fatigue management program. 2 ed.

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-02-15

The impacts of fatigue on workplace safety are now commonly recognized. Many employers now wish to include fatigue management as part of their overall health and safety programs. This guide to fatigue management was written to help companies in the petroleum industry design and implement effective fatigue management programs that reduce incidents and injuries among employees. The guide provided information about workplace fatigue and discussed fatigue management issues and strategies. It was suggested that workplace culture can play a significant role in managing fatigue by allowing fatigue factors to be quickly recognized and managed. Employers who wish to build fatigue management programs should involve all levels of employees, and should consider all workplace practices and procedures. Consideration must also be given to the development of employee competency in managing fatigue. The guide included step-by-step recommendations for implementing a fatigue management program. It was concluded that the benefits of fatigue management include reduced worker absence and turnover, as well as avoiding the costs of safety incidents. 1 tab., 1 fig.

Comparative study of LDR (Manchester system) and HDR image-guided conformal brachytherapy of cervical cancer: patterns of failure, late complications, and survival.

Science.gov (United States)

Narayan, Kailash; van Dyk, Sylvia; Bernshaw, David; Rajasooriyar, Chrishanthi; Kondalsamy-Chennakesavan, Srinivas

2009-08-01

To compare patterns of failure, late toxicities, and survival in locally advanced cervical cancer patients treated by either low-dose-rate (LDR) or conformal high-dose-rate (HDRc) brachytherapy as a part of curative radiotherapy. A retrospective comparative study of 217 advanced cervix cancer patients was conducted; 90 of these patients received LDR and 127 received HDRc brachytherapy. All patients were staged using International Federation of Gynecology and Obstetrics (FIGO) rules, had pretreatment magnetic resonance imaging (MRI), and were treated with concurrent cisplatin chemoradiotherapy. Both groups matched for FIGO stage, MRI tumor volume, and uterine invasion status. Local and pelvic failures were similar 12-13% and 14% both in both groups. Abdominal and systemic failures in LDR group were 21% and 24%, whereas corresponding failures in HDRc group were 20% and 24%. Sixty-eight percent (87/127) of patients treated by HDRc remained asymptomatic, whereas 42% (38/90) of patients were asymptomatic from the bowel and bladder symptoms after treatment with LDR. The 5-year OS rate was 60% (SE = 4%). The 5-year failure-free survival rate was 55% (SE = 3%). There was no significant difference between the groups. Image-guided HDRc planning led to a large decrease in late radiation effects in patients treated by HDRc. Patterns of failure and survival were similar in patients treated either by LDR or HDRc.

Comparative Study of LDR (Manchester System) and HDR Image-guided Conformal Brachytherapy of Cervical Cancer: Patterns of Failure, Late Complications, and Survival

International Nuclear Information System (INIS)

Narayan, Kailash; Dyk, Sylvia van; Bernshaw, David; Rajasooriyar, Chrishanthi; Kondalsamy-Chennakesavan, Srinivas

2009-01-01

Purpose: To compare patterns of failure, late toxicities, and survival in locally advanced cervical cancer patients treated by either low-dose-rate (LDR) or conformal high-dose-rate (HDRc) brachytherapy as a part of curative radiotherapy. Materials and Methods: A retrospective comparative study of 217 advanced cervix cancer patients was conducted; 90 of these patients received LDR and 127 received HDRc brachytherapy. All patients were staged using International Federation of Gynecology and Obstetrics (FIGO) rules, had pretreatment magnetic resonance imaging (MRI), and were treated with concurrent cisplatin chemoradiotherapy. Both groups matched for FIGO stage, MRI tumor volume, and uterine invasion status. Results: Local and pelvic failures were similar 12-13% and 14% both in both groups. Abdominal and systemic failures in LDR group were 21% and 24%, whereas corresponding failures in HDRc group were 20% and 24%. Sixty-eight percent (87/127) of patients treated by HDRc remained asymptomatic, whereas 42% (38/90) of patients were asymptomatic from the bowel and bladder symptoms after treatment with LDR. The 5-year OS rate was 60% (SE = 4%). The 5-year failure-free survival rate was 55% (SE = 3%). There was no significant difference between the groups. Conclusions: Image-guided HDRc planning led to a large decrease in late radiation effects in patients treated by HDRc. Patterns of failure and survival were similar in patients treated either by LDR or HDRc.

Information structure design for databases a practical guide to data modelling

CERN Document Server

Mortimer, Andrew J

2014-01-01

Computer Weekly Professional Series: Information Structure Design for Databases: A Practical Guide to Data modeling focuses on practical data modeling covering business and information systems. The publication first offers information on data and information, business analysis, and entity relationship model basics. Discussions cover degree of relationship symbols, relationship rules, membership markers, types of information systems, data driven systems, cost and value of information, importance of data modeling, and quality of information. The book then takes a look at entity relationship mode

Polygenic hazard score to guide screening for aggressive prostate cancer

DEFF Research Database (Denmark)

Seibert, Tyler M; Fan, Chun Chieh; Wang, Yunpeng

2018-01-01

. These polymorphisms were incorporated into a survival analysis to estimate their effects on age at diagnosis of aggressive PCa (that is, not eligible for surveillance according to National Comprehensive Cancer Network guidelines; any of Gleason score ≥7, stage T3-T4, PSA (prostate specific antigen) concentration ≥10......OBJECTIVES: To develop and validate a genetic tool to predict age of onset of aggressive prostate cancer (PCa) and to guide decisions of who to screen and at what age. DESIGN: Analysis of genotype, PCa status, and age to select single nucleotide polymorphisms (SNPs) associated with diagnosis...

State criminal justice telecommunications (STACOM). Volume 4: Network design software user's guide

Science.gov (United States)

Lee, J. J.

1977-01-01

A user's guide to the network design program is presented. The program is written in FORTRAN V and implemented on a UNIVAC 1108 computer under the EXEC-8 operating system which enables the user to construct least-cost network topologies for criminal justice digital telecommunications networks. A complete description of program features, inputs, processing logic, and outputs is presented, and a sample run and a program listing are included.

Designing new guides and instruments using McStas

DEFF Research Database (Denmark)

Farhi, E.; Hansen, T.; Wildes, A.

2002-01-01

of guides, neutron optics and instruments [1]. To date, the McStas package has been extensively used at the Institut Laue-Langevin, Grenoble, France, for various studies including cold and thermal guides with ballistic geometry, diffractometers, triple-axis, backscattering and time-of-flight spectrometers...

Design and Experimental Verification of Chang'E-3 Moon-night Survival Device for APXS

Science.gov (United States)

Deng-yi, Chen; Jian, Wu; Yi-ming, Hu; Jin, Chang; Yi-zhong, Gong; Ming-sheng, Cai; Huan-yu, Wang; Jia-yu, Zhang; Xing-zhu, Cui; Jin-zhou, Wang

2016-07-01

The Active Particle X-ray Spectrometer (APXS) is one of the 4 scientific payloads of Chang'E-3 (CE-3) Lunar Rover, of which the scientific object is to identify the elements of lunar soil and rock samples by a carried radioactive source to trigger and detect the characteristic X-ray from them. According to the extreme temperature environment of the APXS and under the restriction of limited resources, this paper presents the design and analysis of the moon-night survival device RHU (radioisotope heating unit) for the APXS, and describes the corresponding environmental tests on its structure dynamics and moon-night survival. Finally, its reinstallation on the launch tower and the preliminary result of its on-orbit operation are introduced.

Novel Study Guides for Biochemistry Meaningful Learning in Biology: a Design-Based Research

Directory of Open Access Journals (Sweden)

Costa, C ; Galembeck, E. Costa, C ; Galembeck, E.

2017-07-01

Full Text Available One of the difficulties for biochemistry learning is the persistence of traditional teaching methods, based on transmission and memorization of abstract and detailed information, usually in a decontextualized way. Such scenario results in surface learning and content reproduction. In order to address these problems, three interventions in a discipline (Metabolism for Biology majors were applied, in the form of innovative teaching tools (study guides. OBJECTIVES: The main goal is to evaluate the impact of these interventions on interest, motivation, and learning of the metabolic pathways. MATERIALS AND METHODS: We describe the development, application, and evaluation of two study guides – one created from a problem used as a contextual connection for glycogen metabolism study and another embedding an integrative view based on glutamate metabolism. Both materials were guided by broad themes like evolution, metabolic adaptation, and comparative biochemistry. The development of the study guides combined submicroscopic (molecular and macroscopic (body, environment levels, aiming to motivate reading and discussion. A design-based research with cycles of application and assessment was carried out, by means of classroom observation, grade analysis in written exams, and students’ interviews. RESULTS AND DISCUSSION: In general, based on in-class student feedback to professors and to the researcher in the interviews, the study guides arouse curiosity and fostered peer discussion. Final average grades indicate a good global performance in all proposed activities. Whole data from study guides’ application in classroom evidenced their impact on interest, motivation, and learning. The strategy of developing problem or integrative situation linking molecular (micro and contextual (macro levels were helpful to foster critical thinking and to value topics of scientific literacy. CONCLUSIONS: Analysis and interpretation of the results point to benefits for

Attributing death to cancer: cause-specific survival estimation.

Directory of Open Access Journals (Sweden)

Mathew A

2002-10-01

Full Text Available Cancer survival estimation is an important part of assessing the overall strength of cancer care in a region. Generally, the death of a patient is taken as the end point in estimation of overall survival. When calculating the overall survival, the cause of death is not taken into account. With increasing demand for better survival of cancer patients it is important for clinicians and researchers to know about survival statistics due to disease of interest, i.e. net survival. It is also important to choose the best method for estimating net survival. Increase in the use of computer programmes has made it possible to carry out statistical analysis without guidance from a bio-statistician. This is of prime importance in third- world countries as there are a few trained bio-statisticians to guide clinicians and researchers. The present communication describes current methods used to estimate net survival such as cause-specific survival and relative survival. The limitation of estimation of cause-specific survival particularly in India and the usefulness of relative survival are discussed. The various sources for estimating cancer survival are also discussed. As survival-estimates are to be projected on to the population at large, it becomes important to measure the variation of the estimates, and thus confidence intervals are used. Rothman′s confidence interval gives the most satisfactory result for survival estimate.

Expert-guided evolutionary algorithm for layout design of complex space stations

Science.gov (United States)

Qian, Zhiqin; Bi, Zhuming; Cao, Qun; Ju, Weiguo; Teng, Hongfei; Zheng, Yang; Zheng, Siyu

2017-08-01

The layout of a space station should be designed in such a way that different equipment and instruments are placed for the station as a whole to achieve the best overall performance. The station layout design is a typical nondeterministic polynomial problem. In particular, how to manage the design complexity to achieve an acceptable solution within a reasonable timeframe poses a great challenge. In this article, a new evolutionary algorithm has been proposed to meet such a challenge. It is called as the expert-guided evolutionary algorithm with a tree-like structure decomposition (EGEA-TSD). Two innovations in EGEA-TSD are (i) to deal with the design complexity, the entire design space is divided into subspaces with a tree-like structure; it reduces the computation and facilitates experts' involvement in the solving process. (ii) A human-intervention interface is developed to allow experts' involvement in avoiding local optimums and accelerating convergence. To validate the proposed algorithm, the layout design of one-space station is formulated as a multi-disciplinary design problem, the developed algorithm is programmed and executed, and the result is compared with those from other two algorithms; it has illustrated the superior performance of the proposed EGEA-TSD.

Radiation protection aspects in the design of nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2008-01-01

. The IAEA takes seriously the enduring challenge for users and regulators everywhere: that of ensuring a high level of safety in the use of nuclear materials and radiation sources around the world. Their continuing utilization for the benefit of humankind must be managed in a safe manner, and the IAEA safety standards are designed to facilitate the achievement of that goal. This Safety Guide has been prepared as a part of the IAEA programme on safety standards for nuclear power plants. It includes recommendations on how to satisfy the requirements established in the Safety Requirements publication on the Safety of Nuclear Power Plants: Design. It addresses the provisions that should be made in the design of nuclear power plants in order to protect site personnel, the public and the environment against radiological hazards for operational states, decommissioning and accident conditions. The recommendations on radiation protection provided in this Safety Guide are consistent with the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), which were jointly sponsored by the Food and Agriculture Organization of the United Nations (FAO), the IAEA, the International Labour Organisation (ILO), the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO) and the World Health Organization (WHO). This Safety Guide supersedes Safety Series No. 50-SG-D9, Design Aspects of Radiation Protection for Nuclear Power Plants, published in 1985. Effective radiation protection is a combination of good design, high quality construction and proper operation. Procedures that address the radiation protection aspects of operation are covered in the Safety Guide on Radiation Protection and Radioactive Waste Management in the operation of Nuclear Power Plants

Impact of Focused Ultrasound-enhanced Drug Delivery on Survival in Rats with Glioma

Science.gov (United States)

Treat, Lisa Hsu; Zhang, Yongzhi; McDannold, Nathan; Hynynen, Kullervo

2009-04-01

Malignancies of the brain remain difficult to treat with chemotherapy because the selective permeability of the blood-brain barrier (BBB) blocks many potent agents from reaching their target. Previous studies have illustrated the feasibility of drug and antibody delivery across the BBB using MRI-guided focused ultrasound. In this study, we investigated the impact of focused ultrasound-enhanced delivery of doxorubicin on survival in rats with aggressive glioma. Sprague-Dawley rats were implanted with 9 L gliosarcoma cells in the brain. Eight days after implantation, each rat received one of the following: (1) no treatment (control), (2) a single treatment with microbubble-enhanced MRI-guided focused ultrasound (FUS only), (3) a single treatment with i.v. liposomal doxorubicin (DOX only), or (4) a single treatment with microbubble-enhanced MRI-guided focused ultrasound and concurrent i.v. injections of liposomal doxorubicin (FUS+DOX). The survival time from implantation to death or euthanasia was recorded. We observed a modest but significant increase in median survival time in rats treated with combined MRI-guided focused ultrasound chemotherapy, compared to chemotherapy alone (p0.10). Our study demonstrates for the first time a therapeutic benefit achieved with ultrasound-enhanced drug delivery across the blood-brain barrier. This confirmation of efficacy in an in vivo tumor model indicates that targeted drug delivery using MRI-guided focused ultrasound has the potential to have a major impact on the treatment of patients with brain tumors and other neurological disorders.

Guide to the design, testing and use of packaging for the safe transport of radioactive materials

International Nuclear Information System (INIS)

1976-01-01

This guide gives to designers, manufacturers and users of packaging, advice supplementary to, or in amplification of, the recommendations made by the International Atomic Energy Agency for the safe transport of radioactive materials as given in IAEA Safety Series No. 6 (1973) and the advisory material given in IAEA Safety Series No. 37 (1973). This guide should be read and used in conjunction with these recommendations, the appropriate national regulations and any applicable regulations or requirements of the carriers concerned. (author)

Reliability of computer designed surgical guides in six implant rehabilitations with two years follow-up.

Science.gov (United States)

Giordano, Mauro; Ausiello, Pietro; Martorelli, Massimo; Sorrentino, Roberto

2012-09-01

To evaluate the reliability and accuracy of computer-designed surgical guides in osseointegrated oral implant rehabilitation. Six implant rehabilitations, with a total of 17 implants, were completed with computer-designed surgical guides, performed with the master model developed by muco-compressive and muco-static impressions. In the first case, the surgical guide had exclusively mucosal support, in the second case exclusively dental support. For all six cases computer-aided surgical planning was performed by virtual analyses with 3D models obtained by dental scan DICOM data. The accuracy and stability of implant osseointegration over two years post surgery was then evaluated with clinical and radiographic examinations. Radiographic examination, performed with digital acquisitions (RVG - Radio Video graph) and parallel techniques, allowed two-dimensional feedback with a margin of linear error of 10%. Implant osseointegration was recorded for all the examined rehabilitations. During the clinical and radiographic post-surgical assessments, over the following two years, the peri-implant bone level was found to be stable and without appearance of any complications. The margin of error recorded between pre-operative positions assigned by virtual analysis and the post-surgical digital radiographic observations was as low as 0.2mm. Computer-guided implant surgery can be very effective in oral rehabilitations, providing an opportunity for the surgeon: (a) to avoid the necessity of muco-periosteal detachments and then (b) to perform minimally invasive interventions, whenever appropriate, with a flapless approach. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Survival of various implant-supported prosthesis designs following 36 months of clinical function.

Science.gov (United States)

Rodriguez, A M; Orenstein, I H; Morris, H F; Ochi, S

2000-12-01

The use of endosseous dental implants to replace natural teeth lost to trauma, dental caries, or periodontal disease has become a predictable form of prosthetic treatment since gaining popularity in the early 1980s. While numerous clinical studies have focused on the survival of implants, few address the survival of different prosthesis designs. Beginning in 1991, 882 prostheses supported by more than 2,900 implants (687 patients) were placed by the Department of Veterans Affairs Dental Implant Clinical Research Group (DICRG). These prostheses were divided into five research strata based on arch location. The recommended design for each stratum was: bar-supported overdenture (maxillary completely edentulous); screw-retained hybrid denture (mandibular completely edentulous); screw-retained fixed partial denture (mandibular and maxillary posterior partially edentulous); and cemented single crown (maxillary anterior single tooth). Alternative overdenture designs were utilized in the edentulous arches when the recommended prosthesis could not be fabricated. Prosthesis success rates for the research strata were calculated for an observation time of up to 36 months following prosthesis placement. Success rates for the maxillary edentulous stratum ranged from 94.6% for the bar-retained overdenture supported by five to six fixtures to 81.8% for the cap-retained overdenture. The mandibular edentulous strata produced success rates of 98.1% for the fixed hybrid prosthesis to 91.7% for the cap-retained prosthesis. Success rates for maxillary and mandibular posterior fixed partial dentures were 94.3% and 92.6%, respectively, while the maxillary anterior single-tooth prosthesis yielded a success rate of 98.1% for the 36-month observation period. The recommended prosthesis designs investigated in this study proved to be reliable, with encouraging success rates for an observation period of 36 months following placement.

A Kleptocrat's Survival Guide : Autocratic Longevity in the Face of Civil Conflict

OpenAIRE

Milante, Gary

2007-01-01

Autocratic regimes are quite often short-lived kleptocracies formed and maintained through force and used to appropriate wealth from subjects. Some of these autocracies collapse after only a year or two of plundering while others manage to survive for 15 or 20 years. This paper asks why some autocratic regimes survive while others fail. A database of political regimes from 1960 to 2003 is ...

Electron work function-a promising guiding parameter for material design.

Science.gov (United States)

Lu, Hao; Liu, Ziran; Yan, Xianguo; Li, Dongyang; Parent, Leo; Tian, Harry

2016-04-14

Using nickel added X70 steel as a sample material, we demonstrate that electron work function (EWF), which largely reflects the electron behavior of materials, could be used as a guide parameter for material modification or design. Adding Ni having a higher electron work function to X70 steel brings more "free" electrons to the steel, leading to increased overall work function, accompanied with enhanced e(-)-nuclei interactions or higher atomic bond strength. Young's modulus and hardness increase correspondingly. However, the free electron density and work function decrease as the Ni content is continuously increased, accompanied with the formation of a second phase, FeNi3, which is softer with a lower work function. The decrease in the overall work function corresponds to deterioration of the mechanical strength of the steel. It is expected that EWF, a simple but fundamental parameter, may lead to new methodologies or supplementary approaches for metallic materials design or tailoring on a feasible electronic base.

Using the DSAP Framework to Guide Instructional Design and Technology Integration in BYOD Classrooms

Science.gov (United States)

Wasko, Christopher W.

2016-01-01

The purpose of this study was to determine the suitability of the DSAP Framework to guide instructional design and technology integration for teachers piloting a BYOD (Bring Your Own Device) initiative and to measure the impact the initiative had on the amount and type of technology used in pilot classrooms. Quantitative and qualitative data were…

When Nothing Matters Anymore: A Survival Guide for Depressed Teens.

Science.gov (United States)

Cobain, Bev

This guide provides adolescents with information on depression. An introduction discusses symptoms of depression and lists famous people who were known to be depressed. Part 1, "What's Wrong," explores how it feels to be depressed, the causes and types of depression, and the connections between depression, suicide, and drug and alcohol abuse. A…

Guide for design and application of protective instrumentation for experiments in the BSR and ORR

International Nuclear Information System (INIS)

West, K.W.

1977-03-01

This report is a guide for the design and application of protective instrumentation for experiments that are to be operated in the Bulk Shielding Reactor (BSR) or the Oak Ridge Research Reactor (ORR) and are to be connected to the reactor power-reduction and alarm systems

Guide to the safe design, construction and use of radioisotopic power generators for certain land and sea applications

International Nuclear Information System (INIS)

1970-01-01

The increasing development and production of certain types of radioisotopic power generators has indicated the need for internationally acceptable recommendations to be formulated governing the health and safety aspects of their construction and use. Accordingly, a Joint IAEA/ENEA Working Group was set up in 1966 with the task of studying the health and safety problems associated with such devices. The Working Group met twice, in April and December 1967, and prepared a draft guide to the safe design, construction and use of radioisotopic power generators. This draft guide was circulated in September 1968 to IAEA and ENEA Member States for consideration, and the comments that were subsequently received have formed the basis of a re-examination of the draft text in June 1969 by a joint IAEA/ENEA group of consultants set up by the two Agencies to bring the draft guide to its final form. This guide is intended to facilitate the establishment of an adequate standard of safety in the design, construction, installation and use of radioisotopic power generators, and in their ultimate disposal. The immediate requirement is considered to be in relation to those generators which are in an advanced state of development and production and which are designed for use on land and on o r under the sea. The guide deals mainly with radioisotopic power generators in the power range from about one hundred milliwatts to some hundred watts. However, competent national authorities may adapt these guidelines to generators outside this power range. It has been decided at this stage to exclude consideration of miniature generators for medical use, in watches and in other devices available to the general public. Generators for use in space have also been excluded.

Evaluation and rational design of guide RNAs for efficient CRISPR/Cas9-mediated mutagenesis in Ciona.

Science.gov (United States)

Gandhi, Shashank; Haeussler, Maximilian; Razy-Krajka, Florian; Christiaen, Lionel; Stolfi, Alberto

2017-05-01

The CRISPR/Cas9 system has emerged as an important tool for various genome engineering applications. A current obstacle to high throughput applications of CRISPR/Cas9 is the imprecise prediction of highly active single guide RNAs (sgRNAs). We previously implemented the CRISPR/Cas9 system to induce tissue-specific mutations in the tunicate Ciona. In the present study, we designed and tested 83 single guide RNA (sgRNA) vectors targeting 23 genes expressed in the cardiopharyngeal progenitors and surrounding tissues of Ciona embryo. Using high-throughput sequencing of mutagenized alleles, we identified guide sequences that correlate with sgRNA mutagenesis activity and used this information for the rational design of all possible sgRNAs targeting the Ciona transcriptome. We also describe a one-step cloning-free protocol for the assembly of sgRNA expression cassettes. These cassettes can be directly electroporated as unpurified PCR products into Ciona embryos for sgRNA expression in vivo, resulting in high frequency of CRISPR/Cas9-mediated mutagenesis in somatic cells of electroporated embryos. We found a strong correlation between the frequency of an Ebf loss-of-function phenotype and the mutagenesis efficacies of individual Ebf-targeting sgRNAs tested using this method. We anticipate that our approach can be scaled up to systematically design and deliver highly efficient sgRNAs for the tissue-specific investigation of gene functions in Ciona. Copyright © 2017 Elsevier Inc. All rights reserved.

A haptic unit designed for magnetic-resonance-guided biopsy.

Science.gov (United States)

Tse, Z T H; Elhawary, H; Rea, M; Young, I; Davis, B L; Lamperth, M

2009-02-01

The magnetic fields present in the magnetic resonance (MR) environment impose severe constraints on any mechatronic device present in its midst, requiring alternative actuators, sensors, and materials to those conventionally used in traditional system engineering. In addition the spatial constraints of closed-bore scanners require a physical separation between the radiologist and the imaged region of the patient. This configuration produces a loss of the sense of touch from the target anatomy for the clinician, which often provides useful information. To recover the force feedback from the tissue, an MR-compatible haptic unit, designed to be integrated with a five-degrees-of-freedom mechatronic system for MR-guided prostate biopsy, has been developed which incorporates position control and force feedback to the operator. The haptic unit is designed to be located inside the scanner isocentre with the master console in the control room. MR compatibility of the device has been demonstrated, showing a negligible degradation of the signal-to-noise ratio and virtually no geometric distortion. By combining information from the position encoder and force sensor, tissue stiffness measurement along the needle trajectory is demonstrated in a lamb liver to aid diagnosis of suspected cancerous tissue.

Safety design guide for safety related systems for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

In general, two types of safety related systems and structures exist in the nuclear plant; The one is a systems and structures which perform safety functions during the normal operation of the plant, and the other is a systems and structures which perform safety functions to mitigate events caused by failure of the normally operating systems or by naturally occurring phenomena. In this safety design guide, these systems are identified in detail, and the major events for which the safety functions are required and the major safety requirements are identified in the list. As the probabilistic safety assessments are completed during the course of the project, additions or deletions to the list may be justified. 3 tabs. (Author) .new

Safety design guide for safety related systems for CANDU 9

Energy Technology Data Exchange (ETDEWEB)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young [Korea Atomic Energy Research Institute, Daeduk (Korea, Republic of); Wright, A.C.D. [Atomic Energy of Canada Ltd., Toronto (Canada)

1996-03-01

In general, two types of safety related systems and structures exist in the nuclear plant; The one is a systems and structures which perform safety functions during the normal operation of the plant, and the other is a systems and structures which perform safety functions to mitigate events caused by failure of the normally operating systems or by naturally occurring phenomena. In this safety design guide, these systems are identified in detail, and the major events for which the safety functions are required and the major safety requirements are identified in the list. As the probabilistic safety assessments are completed during the course of the project, additions or deletions to the list may be justified. 3 tabs. (Author) .new.

A beginner's guide to 3D printing 14 simple toy designs to get you started

CERN Document Server

Rigsby, Mike

2014-01-01

A Beginner''s Guide to 3D Printing is the perfect resource for those who would like to experiment with 3D design and manufacturing, but have little or no technical experience with the standard software. Author Mike Rigsby leads readers step-by-step through 15 simple toy projects, each illustrated with screen caps of Autodesk 123D Design, the most common free 3D software available. The projects are later described using Sketchup, another free popular software package. Beginning with basics projects that will take longer to print than design, readers are then given instruction on more advanced t

Masked Visual Analysis: Minimizing Type I Error in Visually Guided Single-Case Design for Communication Disorders.

Science.gov (United States)

Byun, Tara McAllister; Hitchcock, Elaine R; Ferron, John

2017-06-10

Single-case experimental designs are widely used to study interventions for communication disorders. Traditionally, single-case experiments follow a response-guided approach, where design decisions during the study are based on participants' observed patterns of behavior. However, this approach has been criticized for its high rate of Type I error. In masked visual analysis (MVA), response-guided decisions are made by a researcher who is blinded to participants' identities and treatment assignments. MVA also makes it possible to conduct a hypothesis test assessing the significance of treatment effects. This tutorial describes the principles of MVA, including both how experiments can be set up and how results can be used for hypothesis testing. We then report a case study showing how MVA was deployed in a multiple-baseline across-subjects study investigating treatment for residual errors affecting rhotics. Strengths and weaknesses of MVA are discussed. Given their important role in the evidence base that informs clinical decision making, it is critical for single-case experimental studies to be conducted in a way that allows researchers to draw valid inferences. As a method that can increase the rigor of single-case studies while preserving the benefits of a response-guided approach, MVA warrants expanded attention from researchers in communication disorders.

Virtual Diagnostic Sensors Design for an Automated Guided Vehicle

Directory of Open Access Journals (Sweden)

Ralf Stetter

2018-05-01

Full Text Available In recent years, Automated Guided Vehicles (AGVs have been playing an increasingly important role in producing industry and infrastructure and will soon arrive to other areas of human life such as the transportation of goods and people. However, several challenges still aggravate the operation of AGVs, which limit the amount of implementation. One major challenge is the realization of reliable sensors that can capture the different aspects of the state of an AGV as well as its surroundings. One promising approach towards more reliable sensors is the supplementary application of virtual sensors, which are able to generate virtual measurements by using other sources of information such as actuator states and already existing sensors together with appropriate mathematical models. The focus of the research described in this paper is the design of virtual sensors determining forces and torques acting on an AGV. The proposed novel approach is using a quadratic boundedness approach, which makes it possible to include bounded disturbances acting on the AGV. One major advantage of the presented approach is that the use of complex tire models can be avoided. Information from acceleration and yaw rate sensors is processed in order to realize reliable virtual force and torque sensors. The resulting force and torque information can be used for several diagnostic purposes such as fault detection or fault prevention. The presented approach is explained and verified on the basis of an innovative design of an AGV. This innovative design addresses another major challenge for AGVs, which is the limited maneuvering possibilities of many AGV designs. The innovative design allows nearly unlimited maneuvering possibilities but requires reliable sensor data. The application of the approach in the AGV resulted in the insight that the generated estimates are consistent with the longitudinal forces and torques obtained by a proven reference model.

Achieving 50% Energy Savings in New Schools, Advanced Energy Design Guides: K-12 Schools (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2014-09-01

This fact sheet summarizes recommendations for designing elementary, middle, and high school buildings that will result in 50% less energy use than conventional new schools built to minimum code requirements. The recommendations are drawn from the Advanced Energy Design Guide for K-12 School Buildings, an ASHRAE publication that provides comprehensive recommendations for designing low-energy-use school buildings (see sidebar). Designed as a stand-alone document, this fact sheet provides key principles and a set of prescriptive design recommendations appropriate for smaller schools with insufficient budgets to fully implement best practices for integrated design and optimized performance. The recommendations have undergone a thorough analysis and review process through ASHRAE, and have been deemed the best combination of measures to achieve 50% savings in the greatest number of schools.

Designing new guides and instruments using McStas

CERN Document Server

Farhi, E; Wildes, A R; Ghosh, R; Lefmann, K

2002-01-01

With the increasing complexity of modern neutron-scattering instruments, the need for powerful tools to optimize their geometry and physical performances (flux, resolution, divergence, etc.) has become essential. As the usual analytical methods reach their limit of validity in the description of fine effects, the use of Monte Carlo simulations, which can handle these latter, has become widespread. The McStas program was developed at Riso National Laboratory in order to provide neutron scattering instrument scientists with an efficient and flexible tool for building Monte Carlo simulations of guides, neutron optics and instruments. To date, the McStas package has been extensively used at the Institut Laue-Langevin, Grenoble, France, for various studies including cold and thermal guides with ballistic geometry, diffractometers, triple-axis, backscattering and time-of-flight spectrometers. In this paper, we present some simulation results concerning different guide geometries that may be used in the future at th...

What Level Design Elements Determine Flow? : How Light and Objects Guide the Player in Overwatch and Doom

OpenAIRE

Eliasson, David

2017-01-01

This thesis presents a comparative study between Overwatch (2016) and Doom (2016) to determine how these fast-paced games facilitate flow in their gameplay. The second chapter looks at formal definitions of flow and level design to establish a vocabulary for following chapters. Through formal analysis the level designs of both games are then examined to establish what elements in them guide players and keep the flow in gameplay. The thesis also examines how the initial gameplay design princip...

Good Practice Guide Waste Minimization/Pollution Prevention

Energy Technology Data Exchange (ETDEWEB)

J Dorsey

1999-10-14

This Good Practice Guide provides tools, information, and examples for promoting the implementation of pollution prevention during the design phases of U.S. Department of Energy (DOE) projects. It is one of several Guides for implementing DOE Order 430.1, Life-cycle Asset Management. DOE Order 430.1 provides requirements for DOE, in partnership with its contractors, to plan, acquire, operate, maintain, and dispose of physical assets. The goals of designing for pollution prevention are to minimize raw material consumption, energy consumption, waste generation, health and safety impacts, and ecological degradation over the entire life of the facility (EPA 1993a). Users of this Guide will learn to translate national policy and regulatory requirements for pollution prevention into action at the project level. The Guide was written to be applicable to all DOE projects, regardless of project size or design phase. Users are expected to interpret the Guide for their individual project's circumstances, applying a graded approach so that the effort is consistent with the anticipated waste generation and resource consumption of the physical asset. This Guide employs a combination of pollution prevention opportunity assessment (PPOA) methods and design for environment (DfE) philosophies. The PPOA process was primarily developed for existing products, processes, and facilities. The PPOA process has been modified in this Guide to address the circumstances of the DOE design process as delineated in DOE Order 430.1 and its associated Good Practice Guides. This modified form of the PPOA is termed the Pollution Prevention Design Assessment (P2DA). Information on current nationwide methods and successes in designing for the environment also have been reviewed and are integrated into this guidance.

Lathe Operator. Coordinator's Guide. Individualized Study Guide. General Metal Trades.

Science.gov (United States)

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This guide provides information to enable coordinators to direct learning activities for students using an individualized study guide on operating a lathe. The study material is designed for students enrolled in cooperative part-time training and employed, or desiring to be employed, as lathe operators. Contents include a sample progress chart,…

Greening Federal Facilities: An Energy, Environmental, and Economic Resource Guide for Federal Facility Managers and Designers; Second Edition

Energy Technology Data Exchange (ETDEWEB)

Wilson, A.

2001-05-16

Greening Federal Facilities, Second Edition, is a nuts-and-bolts resource guide compiled to increase energy and resource efficiency, cut waste, and improve the performance of Federal buildings and facilities. The guide highlights practical actions that facility managers, design and construction staff, procurement officials, and facility planners can take to save energy and money, improve the comfort and productivity of employees, and benefit the environment. It supports a national effort to promote energy and environmental efficiency in the nation's 500,000 Federal buildings and facilities. Topics covered include current Federal regulations; environmental and energy decision-making; site and landscape issues; building design; energy systems; water and wastewater; materials; waste management, and recycling; indoor environmental quality; and managing buildings.

Design and rationale of the MR-INFORM study: stress perfusion cardiovascular magnetic resonance imaging to guide the management of patients with stable coronary artery disease

Directory of Open Access Journals (Sweden)

Hussain Shazia T

2012-09-01

Full Text Available Abstract Background In patients with stable coronary artery disease (CAD, decisions regarding revascularisation are primarily driven by the severity and extent of coronary luminal stenoses as determined by invasive coronary angiography. More recently, revascularisation decisions based on invasive fractional flow reserve (FFR have shown improved event free survival. Cardiovascular magnetic resonance (CMR perfusion imaging has been shown to be non-inferior to nuclear perfusion imaging in a multi-centre setting and superior in a single centre trial. In addition, it is similar to invasively determined FFR and therefore has the potential to become the non-invasive test of choice to determine need for revascularisation. Trial design The MR-INFORM study is a prospective, multi-centre, randomised controlled non-inferiority, outcome trial. The objective is to compare the efficacy of two investigative strategies for the management of patients with suspected CAD. Patients presenting with stable angina are randomised into two groups: 1 The FFR-INFORMED group has subsequent management decisions guided by coronary angiography and fractional flow reserve measurements. 2 The MR-INFORMED group has decisions guided by stress perfusion CMR. The primary end-point will be the occurrence of major adverse cardiac events (death, myocardial infarction and repeat revascularisation at one year. Clinical trials.gov identifier NCT01236807. Conclusion MR INFORM will assess whether an initial strategy of CMR perfusion is non-inferior to invasive angiography supplemented by FFR measurements to guide the management of patients with stable coronary artery disease. Non-inferiority of CMR perfusion imaging to the current invasive reference standard (FFR would establish CMR perfusion imaging as an attractive non-invasive alternative to current diagnostic pathways.

PET-CT–Guided Surveillance of Head and Neck Cancers

Science.gov (United States)

Patients with advanced squamous cell carcinoma of the head and neck who underwent PET-CT–guided surveillance had fewer operations but similar overall survival rates to those of patients who underwent planned neck dissection.

Preliminary design of high-power wave-guide/transmission system

Indian Academy of Sciences (India)

... CW klystron followed by wave-guide filter, dual directional coupler, high-power circulator, three 3 dB magic TEE power dividers to split the main channel into four equal channels of 250 kW each. Each individual channel has dual directional couplers, flexible wave-guide sections and high power ceramic vacuum window.

Architectural Refinement for the Design of Survivable Systems

National Research Council Canada - National Science Library

Ellison, Robert

2001-01-01

...; that is, have no central administration and no unified security policy. The survivable architecture refinement is an iterative risk-driven process which adopts the structure of Boehm's Spiral Model Boehm 88...

Computer-designed surgical guide template compared with free-hand operation for mesiodens extraction in premaxilla using “trapdoor” method

Science.gov (United States)

Hu, Ying Kai; Xie, Qian Yang; Yang, Chi; Xu, Guang Zhou

2017-01-01

Abstract The aim of this study was to introduce a novel method of mesiodens extraction using a vascularized pedicled bone flap by piezosurgery and to compare the differences between a computer-aided design surgical guide template and free-hand operation. A total of 8 patients with mesiodens, 4 with a surgical guide (group I), and 4 without it (group II) were included in the study. The surgical design was to construct a trapdoor pedicle on the superior mucoperiosteal attachment with application of piezosurgery. The bone lid was repositioned after mesiodens extraction. Group I patients underwent surgeries based on the preoperative planning with surgical guide templates, while group II patients underwent free-hand operation. The outcome variables were success rate, intraoperative time, anterior nasal spine (ANS) position, changes of nasolabial angle (NLA), and major complications. Data from the 2 groups were compared by SPSS 17.0, using Wilcoxon test. The operative time was significantly shorter in group I patients. All the mesiodentes were extracted successfully and no obvious differences of preoperative and postoperative ANS position and NLA value were found in both groups. The patients were all recovered uneventfully. Surgical guide templates can enhance clinical accuracy and reduce operative time by facilitating accurate osteotomies. PMID:28658139

Manual on shielded enclosures. Incorporating: Applications guide, procedures guide, basics guide

International Nuclear Information System (INIS)

1992-01-01

This booklet contains a basic guide to the principles of the production of ionizing radiation and to methods of radiation protection and dosimetry, and a discussion of the need for shielded enclosures. Shielding materials and the design of the enclosures are described

Human factors guides

International Nuclear Information System (INIS)

Penington, J.

1995-10-01

This document presents human factors guides, which have been developed in order to provide licensees of the AECB with advice as to how to address human factors issues within the design and assessment process. This documents presents the results of a three part study undertaken to develop three guides which are enclosed in this document as Parts B, C and D. As part of the study human factors standards, guidelines, handbooks and other texts were researched, to define those which would be most useful to the users of the guides and for the production of the guides themselves. Detailed specifications were then produced to outline the proposed contents and format of the three guides. (author). 100 refs., 3 tabs., 11 figs

Human factors guides

Energy Technology Data Exchange (ETDEWEB)

Penington, J [PHF Services Inc., (Canada)

1995-10-01

This document presents human factors guides, which have been developed in order to provide licensees of the AECB with advice as to how to address human factors issues within the design and assessment process. This documents presents the results of a three part study undertaken to develop three guides which are enclosed in this document as Parts B, C and D. As part of the study human factors standards, guidelines, handbooks and other texts were researched, to define those which would be most useful to the users of the guides and for the production of the guides themselves. Detailed specifications were then produced to outline the proposed contents and format of the three guides. (author). 100 refs., 3 tabs., 11 figs.

Computerized Italian criticality guide, description and validation

International Nuclear Information System (INIS)

Carotenuto, M.; Landeyro, P.A.

1988-10-01

Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

Computerized Italian criticality guide, description and validation

Energy Technology Data Exchange (ETDEWEB)

Carotenuto, M; Landeyro, P A [ENEA - Dipartimento Ciclo del Combustibile, Centro Ricerche Energia, Casaccia (Italy)

1988-10-15

Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

Performance-Oriented packaging: A guide to identifying, procuring, and using

International Nuclear Information System (INIS)

O'Brien, J.H.

1992-09-01

This document guides users through the process of correctly identifying, obtaining, and using performance-oriented packaging. Almost all hazardous material shipments can be made in commercially available performance-oriented packaging. To cover the remaining shipments requiring specially designed packaging, a design guide is being developed. The design guide is scheduled to be issued 1 year after this procurement guide

Survival of enteric pathogens in common beverages: an in vitro study.

Science.gov (United States)

Sheth, N K; Wisniewski, T R; Franson, T R

1988-06-01

This in vitro study was undertaken to determine the potential for survival of enteric pathogens in common drinking beverages. Three carbonated soft drinks, two alcoholic beverages, skim milk, and water were inoculated with Salmonella, Shigella, and enterotoxigenic Escherichia coli, and quantitative counts were performed over 2 days. Our studies showed poorest survival of all three organisms in wine, and greatest growth in milk and water. Beer and cola allowed survival of small numbers of Salmonella and E. coli at 48 h, whereas sour mix and diet cola were sterile by 48 h. Survival features may correlate with pH of the beverages. These observations may be useful in guiding travellers for appropriate beverage consumption while visiting areas endemic for "traveller's diarrhea."

Survival after Radiofrequency Ablation in 122 Patients with Inoperable Colorectal Lung Metastases

Energy Technology Data Exchange (ETDEWEB)

Gillams, Alice, E-mail: alliesorting@gmail.com [The London Clinic, Radiology Department (United Kingdom); Khan, Zahid [Countess of Chester Hospital (United Kingdom); Osborn, Peter [Queen Alexandra Hospital (United Kingdom); Lees, William [University College London Medical School (United Kingdom)

2013-06-15

Purpose. To analyze the factors associated with favorable survival in patients with inoperable colorectal lung metastases treated with percutaneous image-guided radiofrequency ablation. Methods. Between 2002 and 2011, a total of 398 metastases were ablated in 122 patients (87 male, median age 68 years, range 29-90 years) at 256 procedures. Percutaneous CT-guided cool-tip radiofrequency ablation was performed under sedation/general anesthesia. Maximum tumor size, number of tumors ablated, number of procedures, concurrent/prior liver ablation, previous liver or lung resection, systemic chemotherapy, disease-free interval from primary resection to lung metastasis, and survival from first ablation were recorded prospectively. Kaplan-Meier analysis was performed, and factors were compared by log rank test. Results. The initial number of metastases ablated was 2.3 (range 1-8); the total number was 3.3 (range 1-15). The maximum tumor diameter was 1.7 (range 0.5-4) cm, and the number of procedures was 2 (range 1-10). The major complication rate was 3.9 %. Overall median and 3-year survival rate were 41 months and 57 %. Survival was better in patients with smaller tumors-a median of 51 months, with 3-year survival of 64 % for tumors 2 cm or smaller versus 31 months and 44 % for tumors 2.1-4 cm (p = 0.08). The number of metastases ablated and whether the tumors were unilateral or bilateral did not affect survival. The presence of treated liver metastases, systemic chemotherapy, or prior lung resection did not affect survival. Conclusion. Three-year survival of 57 % in patients with inoperable colorectal lung metastases is better than would be expected with chemotherapy alone. Patients with inoperable but small-volume colorectal lung metastases should be referred for ablation.

Development of Draft Regulatory Guide on Accident Analysis for Nuclear Power Plants with New Safety Design Features

Energy Technology Data Exchange (ETDEWEB)

Bang, Young Seok; Woo, Sweng Woong; Hwang, Tae Suk [KINS, Daejeon (Korea, Republic of); Sim, Suk K; Hwang, Min Jeong [Environment and Energy Technology, Daejeon (Korea, Republic of)

2016-05-15

The present paper discusses the development process of the draft version of regulatory guide (DRG) on accident analysis of the NPP having the NSFD and its result. Based on the consideration on the lesson learned from the previous licensing review, a draft regulatory guide (DRG) on accident analysis for NPP with new safety design features (NSDF) was developed. New safety design features (NSDF) have been introduced to the new constructing nuclear power plants (NPP) since the early 2000 and the issuance of construction permit of SKN Units 3 and 4. Typical examples of the new safety features includes Fluidic Device (FD) within Safety Injection Tanks (SIT), Passive Auxiliary Feedwater System (PAFS), ECCS Core Barrel Duct (ECBD) which were adopted in APR1400 design and/or APR+ design to improve the safety margin of the plants for the postulated accidents of interest. Also several studies of new concept of the safety system such as Hybrid ECCS design have been reported. General and/or specific guideline of accident analysis considering the NSDF has been requested. Realistic evaluation of the impact of NSDF on accident with uncertainty and separated accident analysis accounting the NSDF impact were specified in the DRG. Per the developmental process, identification of key issues, demonstration of the DRG with specific accident with specific NSDF, and improvement of DGR for the key issues and their resolution will be conducted.

Network survivability performance (computer diskette)

Science.gov (United States)

1993-11-01

File characteristics: Data file; 1 file. Physical description: 1 computer diskette; 3 1/2 in.; high density; 2.0MB. System requirements: Mac; Word. This technical report has been developed to address the survivability of telecommunications networks including services. It responds to the need for a common understanding of, and assessment techniques for network survivability, availability, integrity, and reliability. It provides a basis for designing and operating telecommunication networks to user expectations for network survivability.

Preliminary design of high-power wave-guide/transmission system for multimegawatt CW requirements of 100 MeV proton Linac

International Nuclear Information System (INIS)

Shrivastava, Purushottam; Wanmode, Y.D.; Hannurkar, P.R.

2002-01-01

Development of a 100 MeV CW proton Linac has been planned at CAT. This Linac will be needing CW rf power in the frequency ranges of 350 MHz and 700 MHz for its RFQ and DTL/CCDTL/SFDTL structures respectively. The power to the accelerating structures will be produced by either 1 MW CW or 250 kW CW klystron/inductive output tubes (HOM IOTs). The power needed by respective feed points in the structure is max. 250 kW which will be powered by splitting the power from 1 MW klystron/klystrode into four channels by using a wave-guide system. In case of using 250 kW tubes the power to the structures will be provided directly from each tube. Two types of wave-guide transmission system have been considered, viz WR 2300 for 350 MHz rf needs and WR 1500 for 700 MHz rf needs. The typical wave-guide system has been designed using the 1 MW CW klystron followed by wave-guide filter, dual directional coupler, high-power circulator, three 3 dB magic TEE power dividers to split the main channel into four equal channels of 250 kW each. Each individual channel has dual directional couplers, flexible wave-guide sections and high power ceramic vacuum window. The circulator and each power divider is terminated into the isolated ports by high power CW loads. Out of the four channels three channels have phase shifters. Present paper describes the technological aspects and design specifications-considerations for these stringent requirements. (author)

The INCA trial (Impact of NOD2 genotype-guided antibiotic prevention on survival in patients with liver Cirrhosis and Ascites): study protocol for a randomized controlled trial.

Science.gov (United States)

Casper, Markus; Mengel, Martin; Fuhrmann, Christine; Herrmann, Eva; Appenrodt, Beate; Schiedermaier, Peter; Reichert, Matthias; Bruns, Tony; Engelmann, Cornelius; Grünhage, Frank; Lammert, Frank

2015-03-08

Patients with liver cirrhosis have a highly elevated risk of developing bacterial infections that significantly decrease survival rates. One of the most relevant infections is spontaneous bacterial peritonitis (SBP). Recently, NOD2 germline variants were found to be potential predictors of the development of infectious complications and mortality in patients with cirrhosis. The aim of the INCA (Impact of NOD2 genotype-guided antibiotic prevention on survival in patients with liver Cirrhosis and Ascites) trial is to investigate whether survival of this genetically defined high-risk group of patients with cirrhosis defined by the presence of NOD2 variants is improved by primary antibiotic prophylaxis of SBP. The INCA trial is a double-blind, placebo-controlled clinical trial with two parallel treatment arms (arm 1: norfloxacin 400 mg once daily; arm 2: placebo once daily; 12-month treatment and observational period). Balanced randomization of 186 eligible patients with stratification for the protein content of the ascites (INCA trial is first in the field of hepatology aimed at rapidly transferring and validating information on individual genetic risk into clinical decision algorithms. German Clinical Trials Register DRKS00005616 . Registered 22 January 2014. EU Clinical Trials Register EudraCT 2013-001626-26 . Registered 26 January 2015.

National Audubon Society Specials. Teacher's Guide I.

Science.gov (United States)

WETA - TV, Washington, DC.

Since no civilization can survive without a healthy environment, people must learn to live in harmony with their natural ecosystems and build for future generations. This guide describes six award-winning programs on the condor, black-footed ferret, panthers and cheetahs, ducks, farming and wildlife, and the Galapagos Islands. Although each…

Good Practice Guide Waste Minimization/Pollution Prevention; TOPICAL

International Nuclear Information System (INIS)

J Dorsey

1999-01-01

This Good Practice Guide provides tools, information, and examples for promoting the implementation of pollution prevention during the design phases of U.S. Department of Energy (DOE) projects. It is one of several Guides for implementing DOE Order 430.1, Life-cycle Asset Management. DOE Order 430.1 provides requirements for DOE, in partnership with its contractors, to plan, acquire, operate, maintain, and dispose of physical assets. The goals of designing for pollution prevention are to minimize raw material consumption, energy consumption, waste generation, health and safety impacts, and ecological degradation over the entire life of the facility (EPA 1993a). Users of this Guide will learn to translate national policy and regulatory requirements for pollution prevention into action at the project level. The Guide was written to be applicable to all DOE projects, regardless of project size or design phase. Users are expected to interpret the Guide for their individual project's circumstances, applying a graded approach so that the effort is consistent with the anticipated waste generation and resource consumption of the physical asset. This Guide employs a combination of pollution prevention opportunity assessment (PPOA) methods and design for environment (DfE) philosophies. The PPOA process was primarily developed for existing products, processes, and facilities. The PPOA process has been modified in this Guide to address the circumstances of the DOE design process as delineated in DOE Order 430.1 and its associated Good Practice Guides. This modified form of the PPOA is termed the Pollution Prevention Design Assessment (P2DA). Information on current nationwide methods and successes in designing for the environment also have been reviewed and are integrated into this guidance

Defining SOD1 ALS natural history to guide therapeutic clinical trial design.

Science.gov (United States)

Bali, Taha; Self, Wade; Liu, Jingxia; Siddique, Teepu; Wang, Leo H; Bird, Thomas D; Ratti, Elena; Atassi, Nazem; Boylan, Kevin B; Glass, Jonathan D; Maragakis, Nicholas J; Caress, James B; McCluskey, Leo F; Appel, Stanley H; Wymer, James P; Gibson, Summer; Zinman, Lorne; Mozaffar, Tahseen; Callaghan, Brian; McVey, April L; Jockel-Balsarotti, Jennifer; Allred, Peggy; Fisher, Elena R; Lopate, Glenn; Pestronk, Alan; Cudkowicz, Merit E; Miller, Timothy M

2017-02-01

Understanding the natural history of familial amyotrophic lateral sclerosis (ALS) caused by SOD1 mutations (ALS SOD1 ) will provide key information for optimising clinical trials in this patient population. To establish an updated natural history of ALS SOD1 . Retrospective cohort study from 15 medical centres in North America evaluated records from 175 patients with ALS with genetically confirmed SOD1 mutations, cared for after the year 2000. Age of onset, survival, ALS Functional Rating Scale (ALS-FRS) scores and respiratory function were analysed. Patients with the A4V (Ala-Val) SOD1 mutation (SOD1 A4V ), the largest mutation population in North America with an aggressive disease progression, were distinguished from other SOD1 mutation patients (SOD1 non-A4V ) for analysis. Mean age of disease onset was 49.7±12.3 years (mean±SD) for all SOD1 patients, with no statistical significance between SOD1 A4V and SOD1 non-A4V (p=0.72, Kruskal-Wallis). Total SOD1 patient median survival was 2.7 years. Mean disease duration for all SOD1 was 4.6±6.0 and 1.4±0.7 years for SOD1 A4V . SOD1 A4V survival probability (median survival 1.2 years) was significantly decreased compared with SOD1 non-A4V (median survival 6.8 years; p<0.0001, log-rank). A statistically significant increase in ALS-FRS decline in SOD1 A4V compared with SOD1 non-A4V participants (p=0.02) was observed, as well as a statistically significant increase in ALS-forced vital capacity decline in SOD1 A4V compared with SOD1 non-A4V (p=0.02). SOD1 A4V is an aggressive, but relatively homogeneous form of ALS. These SOD1-specific ALS natural history data will be important for the design and implementation of clinical trials in the ALS SOD1 patient population. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Magnesium 1993 Maternal-Fetal Toxicology. A Clinician's Guide ...

African Journals Online (AJOL)

I S I G I 0 I M I. Maternal-Fetal Toxicology. A Clinician's. Guide. 2nd edition. Ed. by Gideon Koren. Pp. 824 ... analysis is presented, and survival curve ideas for effects over time. Final chapters ... SPSS-PC+, SAS and Nanostat. Several important.

External Events Excluding Earthquakes in the Design of Nuclear Power Plants. Safety Guide

International Nuclear Information System (INIS)

2008-01-01

This Safety Guide provides recommendations and guidance on design for the protection of nuclear power plants from the effects of external events (excluding earthquakes), i.e. events that originate either off the site or within the boundaries of the site but from sources that are not directly involved in the operational states of the nuclear power plant units. In addition, it provides recommendations on engineering related matters in order to comply with the safety objectives and requirements established in the IAEA Safety Requirements publication, Safety of Nuclear Power Plants: Design. It is also applicable to the design and safety assessment of items important to the safety of land based stationary nuclear power plants with water cooled reactors. Contents: 1. Introduction; 2. Application of safety criteria to the design; 3. Design basis for external events; 4. Aircraft crash; 5. External fire; 6. Explosions; 7. Asphyxiant and toxic gases; 8. Corrosive and radioactive gases and liquids; 9. Electromagnetic interference; 10. Floods; 11. Extreme winds; 12. Extreme meteorological conditions; 13. Biological phenomena; 14. Volcanism; 15. Collisions of floating bodies with water intakes and UHS components; Annex I: Aircraft crashes; Annex II: Detonation and deflagration; Annex III: Toxicity limits.

Hearing aid user guides: suitability for older adults.

Science.gov (United States)

Caposecco, Andrea; Hickson, Louise; Meyer, Carly

2014-02-01

The aim of this study was to analyse the content, design, and readability of printed hearing aid user guides to determine their suitability for older adults, who are the main users of hearing aids. Hearing aid user guides were assessed using four readability formulae and a standardized tool to assess content and design (SAM - Suitability Assessment of Materials). A sample of 36 hearing aid user guides (four user guides from nine different hearing aid manufacturers) were analysed. Sixty nine percent of user guides were rated 'not suitable' and 31% were rated 'adequate' for their suitability. Many scored poorly for scope, vocabulary, aspects of layout and typography, and learning stimulation and motivation. The mean reading grade level for all user guides was grade 9.6 which is too high for older adults. The content, design, and readability of hearing aid user guides are not optimal for older adults and thus may serve as a barrier to successful hearing aid outcomes for this population.

The Nursery Worker. Teacher Guide. Revised.

Science.gov (United States)

Welch, A. W.

This teacher's guide is designed for use in a vocational horticulture course designed to prepare students for jobs as nursery workers. Addressed in the individual units of the guide are the following topics: the nursery industry; soils; plant growth; plant nutrition; plant propagation methods; nursery field practices; pest control; techniques for…

How design guides learning from matrix diagrams

NARCIS (Netherlands)

van der Meij, Jan; Amelsvoort, Marije; Anjewierden, Anjo

2017-01-01

Compared to text, diagrams are superior in their ability to structure and summarize information and to show relations between concepts and ideas. Perceptual cues, like arrows, are expected to improve the retention of diagrams by guiding the learner towards important elements or showing a preferred

Helping mothers survive bleeding after birth

DEFF Research Database (Denmark)

Nelissen, Ellen; Ersdal, Hege; Ostergaard, Doris

2014-01-01

OBJECTIVE: To evaluate "Helping Mothers Survive Bleeding After Birth" (HMS BAB) simulation-based training in a low-resource setting. DESIGN: Educational intervention study. SETTING: Rural referral hospital in Northern Tanzania. POPULATION: Clinicians, nurse-midwives, medical attendants, and ambul......OBJECTIVE: To evaluate "Helping Mothers Survive Bleeding After Birth" (HMS BAB) simulation-based training in a low-resource setting. DESIGN: Educational intervention study. SETTING: Rural referral hospital in Northern Tanzania. POPULATION: Clinicians, nurse-midwives, medical attendants...

Against all odds: Tales of survival and growth of the Foundational Approaches in Science Teaching (FAST) project

Science.gov (United States)

Yamamoto, Karen Kina

This study examines the dynamics of survival and growth of curricular and instructional innovations. It focuses on the Foundational Approaches in Science Teaching (FAST) project, a long-term survivor of reform in science education. Key questions guiding this study include: (1) How did the FAST project survive over the past 30 years? (2) What elements are essential for long-term survival and growth of an innovative science program? (3) Why did the project continue to survive amidst several waves of educational reform? The core of my conceptual framework is that the odds of survival and growth of curricular and instructional innovations are increased by the extent to which resources, theory-based curriculum development processes, and professional development strategies are not only incorporated into but also interdependent within a project. With this framework as a guide, the main methods of data collection were document analysis, interviews, and observations. FAST, developed by the University of Hawaii's Curriculum Research and Development Group (CRDG), consists of a sequential and interdisciplinary middle and high school science program for students in grades 6-10. According to the results of this study, the project was able to survive by receiving constant organizational support from CRDG and a steady source of State funding through the university since 1966; it also retained a relatively small but stable staff of highly qualified project personnel. Formulated on a discipline-based theory that values development of students' intellectual capacities as the platform for curriculum research, design, and development, the FAST project translated this vision of science education into key elements of an innovative program that survived and thrived: (1) an interdisciplinary program consisting of physical, biological, and earth sciences; inquiry as content and process; history and philosophy of science; and links between and among sciences, technology, and society; and (2

A Guide to Axial-Flow Turbine Off-Design Computer Program AXOD2

Science.gov (United States)

Chen, Shu-Cheng S.

2014-01-01

A Users Guide for the axial flow turbine off-design computer program AXOD2 is composed in this paper. This Users Guide is supplementary to the original Users Manual of AXOD. Three notable contributions of AXOD2 to its predecessor AXOD, both in the context of the Guide or in the functionality of the code, are described and discussed in length. These are: 1) a rational representation of the mathematical principles applied, with concise descriptions of the formulas implemented in the actual coding. Their physical implications are addressed; 2) the creation and documentation of an Addendum Listing of input namelist-parameters unique to AXOD2, that differ from or are in addition to the original input-namelists given in the Manual of AXOD. Their usages are discussed; and 3) the institution of proper stoppages of the code execution, encoding termination messaging and error messages of the execution to AXOD2. These measures are to safe-guard the integrity of the code execution, such that a failure mode encountered during a case-study would not plunge the code execution into indefinite loop, or cause a blow-out of the program execution. Details on these are discussed and illustrated in this paper. Moreover, this computer program has since been reconstructed substantially. Standard FORTRAN Langue was instituted, and the code was formatted in Double Precision (REAL*8). As the result, the code is now suited for use in a local Desktop Computer Environment, is perfectly portable to any Operating System, and can be executed by any FORTRAN compiler equivalent to a FORTRAN 9095 compiler. AXOD2 will be available through NASA Glenn Research Center (GRC) Software Repository.

VR-based training and assessment in ultrasound-guided regional anesthesia: from error analysis to system design.

LENUS (Irish Health Repository)

2011-01-01

If VR-based medical training and assessment is to improve patient care and safety (i.e. a genuine health gain), it has to be based on clinically relevant measurement of performance. Metrics on errors are particularly useful for capturing and correcting undesired behaviors before they occur in the operating room. However, translating clinically relevant metrics and errors into meaningful system design is a challenging process. This paper discusses how an existing task and error analysis was translated into the system design of a VR-based training and assessment environment for Ultrasound Guided Regional Anesthesia (UGRA).

The history and development of NASA survival equipment.

Science.gov (United States)

Radnofsky, M. I.

1972-01-01

A research and development program on survival equipment was begun in early 1960 with the Mercury Program. The Mercury survival kit is discussed together with Gemini survival equipment, and Apollo I survival equipment. A study program is conducted to assess potential survival problems that may be associated with future space flights landing in polar waters. Survival kit requirements for applications on the Skylab program are also considered. Other investigations are concerned with the design of a global survival kit in connection with Space Shuttle missions.

[Guided maxillofacial surgery: Simulation and surgery aided by stereolithographic guides and custom-made miniplates.

Science.gov (United States)

Philippe, B

2013-08-05

We present a new model of guided surgery, exclusively using computer assistance, from the preoperative planning of osteotomies to the actual surgery with the aid of stereolithographic cutting guides and osteosynthetic miniplates designed and made preoperatively, using custom-made titanium miniplates thanks to direct metal laser sintering. We describe the principles that guide the designing and industrial manufacturing of this new type of osteosynthesis miniplates. The surgical procedure is described step-by-step using several representative cases of dento-maxillofacial dysmorphosis. The encouraging short-term results demonstrate the wide range of application of this new technology for cranio-maxillofacial surgery, whatever the type of osteotomy performed, and for plastic reconstructive surgery. Copyright © 2013. Published by Elsevier Masson SAS.

Field guide to nonlinear optics

CERN Document Server

Powers, Peter E

2013-01-01

Optomechanics is a field of mechanics that addresses the specific design challenges associated with optical systems. This [i]Field Guide [/i]describes how to mount optical components, as well as how to analyze a given design. It is intended for practicing optical and mechanical engineers whose work requires knowledge in both optics and mechanics. This Field Guide is designed for those looking for a condensed and concise source of key concepts, equations, and techniques for nonlinear optics. Topics covered include technologically important effects, recent developments in nonlinear optics

Guiding Device for Precision Grafting of Peripheral Nerves in Complete Thoracic Spinal Cord Injury: Design and Sizing for Clinical Trial

Directory of Open Access Journals (Sweden)

Arvid Frostell

2018-05-01

Full Text Available BackgroundIn an effort to translate preclinical success in achieving spinal cord regeneration through peripheral nerve grafts, this study details the design and sizing of a guiding device for precision grafting of peripheral nerves for use in a clinical trial in complete (AIS-A thoracic spinal cord injury (SCI. The device’s design and sizing are compared to a simulation of human spinal cord sizes based on the best available data.MethodsSpinal cord segmental sizes were generated by computer simulation based on data from a meta-analysis recently published by our group. Thoracic segments T2–T12 were plotted, and seven elliptical shapes were positioned across the center of the distribution of sizes. Geometrical measures of error-of-fit were calculated. CAD modeling was used to create cranial and caudal interfaces for the human spinal cord, aiming to guide descending white matter tracts to gray matter at the caudal end of the device and ascending white matter tracts to gray matter at the cranial end of the device. The interfaces were compared qualitatively to the simulated spinal cord sizes and gray-to-white matter delineations.ResultsThe mean error-of-fit comparing simulated spinal cord segments T2–T12 to the best elliptical shape was 0.41 and 0.36 mm, and the 95th percentile was found at 1.3 and 0.98 mm for transverse and anteroposterior diameter, respectively. A guiding device design was reached for capturing the majority of corticospinal axons at the cranial end of the device and guiding them obliquely to gray matter at the caudal end of the device. Based on qualitative comparison, the vast majority of spinal cord sizes generated indicate an excellent fit to the device’s interfaces.ConclusionA set of SCI guiding devices of seven sizes can cover the variability of human thoracic spinal cord segments T2–T12 with an acceptable error-of-fit for the elliptical shape as well as guiding channels. The computational framework developed can

Teens Working: Turning Earning into Learning. Facilitator Guide [and] Critical Workplace Issues [and] Student Guide.

Science.gov (United States)

Northwest Regional Educational Lab., Portland, OR. Education, Career, and Community Program.

These guides are part of a toolkit designed to help young people make connections between the jobs they now hold, the classes they are taking, and the goals they may have for the near and distant future. The guides contain a variety of materials and activities appropriate for all skill levels. The activities in the student guide are grounded in…

Seismic Safety Guide

International Nuclear Information System (INIS)

Eagling, D.G.

1983-09-01

This guide provides managers with practical guidelines for administering a comprehensive earthquake safety program. The Guide is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, evaluation and rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, special considerations related to shielding blocks, non-structural elements, lifelines, fire protection and emergency facilities. Management of risk and liabilities is also covered. Nuclear facilities per se are not dealt with specifically. The principles covered also apply generally to nuclear facilities but the design and construction of such structures are subject to special regulations and legal controls

Seismic Safety Guide

Energy Technology Data Exchange (ETDEWEB)

Eagling, D.G. (ed.)

1983-09-01

This guide provides managers with practical guidelines for administering a comprehensive earthquake safety program. The Guide is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, evaluation and rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, special considerations related to shielding blocks, non-structural elements, lifelines, fire protection and emergency facilities. Management of risk and liabilities is also covered. Nuclear facilities per se are not dealt with specifically. The principles covered also apply generally to nuclear facilities but the design and construction of such structures are subject to special regulations and legal controls.

The Effect of Femoral Cutting Guide Design Improvements for Patient-Specific Instruments

Directory of Open Access Journals (Sweden)

Oh-Ryong Kwon

2015-01-01

Full Text Available Although the application of patient-specific instruments (PSI for total knee arthroplasty (TKA increases the cost of the surgical procedure, PSI may reduce operative time and improve implant alignment, which could reduce the number of revision surgeries. We report our experience with TKA using PSI techniques in 120 patients from March to December 2014. PSI for TKA were created from data provided by computed tomography (CT scans or magnetic resonance imaging (MRI; which imaging technology is more reliable for the PSI technique remains unclear. In the first 20 patients, the accuracy of bone resection and PSI stability were compared between CT and MRI scans with presurgical results as a reference; MRI produced better results. In the second and third groups, each with 50 patients, the results of bone resection and stability were compared in MRI scans with respect to the quality of scanning due to motion artifacts and experienced know-how in PSI design, respectively. The optimized femoral cutting guide design for PSI showed the closest outcomes in bone resection and PSI stability with presurgical data. It is expected that this design could be a reasonable guideline in PSI.

Career Education Instructional Guide.

Science.gov (United States)

State Univ. of New York, Oswego. Coll. at Oswego. Dept. of Industrial Arts and Technology.

The guide is designed primarily for industrial arts teachers at the middle school level who wish to integrate career education into their curricula. The lessons and activities attempt to establish a balance among career information, technical information, and hands-on experience. The guide contains six lesson plans which cover the topics: the…

Joomla! 25 Beginner's Guide

CERN Document Server

Tiggeler, Eric

2012-01-01

Written with a fast-paced but friendly and engaging approach, this Packt Beginner's guide is designed to be placed alongside the computer as your guide and mentor. Step-by-step tutorials are bolstered by explanations of the reasoning behind what you are doing. You will quickly pick up the necessary skills, tips, and tricks for building a successful Joomla! website. This book is written for beginners to website design. By the end of the book you will have built a complete custom content managed website, and be ready to build any kind of website.

Accuracy of Computer-Assisted Template-Guided Autotransplantation of Teeth With Custom Three-Dimensional Designed/Printed Surgical Tooling: A Cadaveric Study.

Science.gov (United States)

Anssari Moin, David; Verweij, Jop Pieter; Waars, Hugo; van Merkesteyn, Richard; Wismeijer, Daniel

2017-05-01

The aim of the present cadaveric study was to assess the accuracy of computer-assisted template-guided autotransplantation of teeth with custom 3-dimensional (3D) designed/printed surgical tooling. Ten partially edentulous human mandibular cadavers were scanned using a cone-beam computed tomography (CBCT) system and an intraoral scanning system. The 3D data of these cadavers were imported to specialized software and used to analyze the region of the recipient sites, and the donor teeth were selected. Subsequently, congruent to the donor teeth, custom surgical tooling and surgical-guided templates were designed and 3D printed. The guided osteotomies were performed and the donor teeth transplanted. To evaluate the planned donor teeth positions compared with the transplanted donor teeth positions, the mandibles were scanned again using the CBCT system, and software matching was applied to measure the accuracy of the procedure. The mean angular deflection of the transplanted donor teeth with the planned donor teeth positions was 5.6 ± 5.4°. Comparing the 3D positions of the shoulders, a mean deviation of 3.15 ± 1.16 mm and a mean apical deviation of 2.61 ± 0.78 mm were found. The described method of computer-assisted template-guided autotransplantation of teeth with custom 3D designed/printed surgical tooling could potentially provide a relatively accurate alternative for the currently available treatment approaches. Further research should focus on improving the accuracy of this technique and evaluating the clinical success and advantages of this method. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Towards Clinically Optimized MRI-guided Surgical Manipulator for Minimally Invasive Prostate Percutaneous Interventions: Constructive Design*

Science.gov (United States)

Eslami, Sohrab; Fischer, Gregory S.; Song, Sang-Eun; Tokuda, Junichi; Hata, Nobuhiko; Tempany, Clare M.; Iordachita, Iulian

2013-01-01

This paper undertakes the modular design and development of a minimally invasive surgical manipulator for MRI-guided transperineal prostate interventions. Severe constraints for the MRI-compatibility to hold the minimum artifact on the image quality and dimensions restraint of the bore scanner shadow the design procedure. Regarding the constructive design, the manipulator kinematics has been optimized and the effective analytical needle workspace is developed and followed by proposing the workflow for the manual needle insertion. A study of the finite element analysis is established and utilized to improve the mechanism weaknesses under some inevitable external forces to ensure the minimum structure deformation. The procedure for attaching a sterile plastic drape on the robot manipulator is discussed. The introduced robotic manipulator herein is aimed for the clinically prostate biopsy and brachytherapy applications. PMID:24683502

WWC Study Review Guide: Group Design Studies

Science.gov (United States)

What Works Clearinghouse, 2018

2018-01-01

Underlying all What Works Clearinghouse (WWC) products are WWC Study Review Guides, which are intended for use by WWC certified reviewers to assess studies against the WWC evidence standards. As part of an ongoing effort to increase transparency, promote collaboration, and encourage widespread use of the WWC standards, the Institute of Education…

How Design Guides Learning from Matrix Diagrams

Science.gov (United States)

van der Meij, Jan; van Amelsvoort, Marije; Anjewierden, Anjo

2017-01-01

Compared to text, diagrams are superior in their ability to structure and summarize information and to show relations between concepts and ideas. Perceptual cues, like arrows, are expected to improve the retention of diagrams by guiding the learner towards important elements or showing a preferred reading sequence. In our experiment, we analyzed…

PET/CT scanning guided intensity-modulated radiotherapy in treatment of recurrent ovarian cancer

Energy Technology Data Exchange (ETDEWEB)

Du, Xue-lian, E-mail: duxuelian23800@yahoo.com.cn [Department of Gynecologic Oncology, Shandong Cancer Hospital, Jinan 250117 (China); Shandong Academy of Medical Science, Jinan 250012 (China); Jiang, Tao, E-mail: melody23800@yahoo.com.cn [Department of Gynecologic Oncology, Shandong Cancer Hospital, Jinan 250117 (China); Shandong Academy of Medical Science, Jinan 250012 (China); Sheng, Xiu-gui, E-mail: jnsd2000@yahoo.cn [Department of Gynecologic Oncology, Shandong Cancer Hospital, Jinan 250117 (China); Shandong Academy of Medical Science, Jinan 250012 (China); Li, Qing-shui, E-mail: lqs1966@126.com [Department of Gynecologic Oncology, Shandong Cancer Hospital, Jinan 250117 (China); Shandong Academy of Medical Science, Jinan 250012 (China); Wang, Cong, E-mail: jnwc1981@hotmail.com [Department of Gynecologic Oncology, Shandong Cancer Hospital, Jinan 250117 (China); Shandong Academy of Medical Science, Jinan 250012 (China); Yu, Hao, E-mail: jnyh2200@sina.com [Department of Gynecologic Oncology, Shandong Cancer Hospital, Jinan 250117 (China); Shandong Academy of Medical Science, Jinan 250012 (China)

2012-11-15

Objective: This study was undertaken to evaluate the clinical contribution of positron emission tomography using {sup 18}F-fluorodeoxyglucose and integrated computer tomography (FDG-PET/CT) guided intensity-modulated radiotherapy (IMRT) for treatment of recurrent ovarian cancer. Materials and methods: Fifty-eight patients with recurrent ovarian cancer from 2003 to 2008 were retrospectively studied. In these patients, 28 received PET/CT guided IMRT (PET/CT-IMRT group), and 30 received CT guided IMRT (CT-IMRT group). Treatment plans, tumor response, toxicities and survival were evaluated. Results: Changes in GTV delineation were found in 10 (35.7%) patients based on PET-CT information compared with CT data, due to the incorporation of additional lymph node metastases and extension of the metastasis tumor. PET/CT guided IMRT improved tumor response compared to CT-IMRT group (CR: 64.3% vs. 46.7%, P = 0.021; PR: 25.0% vs. 13.3%, P = 0.036). The 3-year overall survival was significantly higher in the PET-CT/IMRT group than control (34.1% vs. 13.2%, P = 0.014). Conclusions: PET/CT guided IMRT in recurrent ovarian cancer patients improved the delineation of GTV and reduce the likelihood of geographic misses and therefore improve the clinical outcome.

Parametric Fires for Structural Design

DEFF Research Database (Denmark)

Hertz, Kristian

2012-01-01

The authorities, the construction association, and a number of companies in Denmark have supported the author writing a guide for design of building structures for parametric fires. The guide is published by the ministry as a supplement to the building regulations. However, consultants and contra......The authorities, the construction association, and a number of companies in Denmark have supported the author writing a guide for design of building structures for parametric fires. The guide is published by the ministry as a supplement to the building regulations. However, consultants...... and contractors have asked for a reference in English in order to make the guide-lines and the background for them available internationally. The paper therefore presents recommendations from the design guide especially concerning how to assess parametric design fires based on the opening factor method for large...... compartments. Findings leading to the guide-lines are discussed, and it is indicated what a safe design fire model means for structural design and how it differs from a safe design fire model for evacuation. Furthermore, the paper includes some experiences from the application of the design guide in practise...

Graphic Communications. Curriculum Guide.

Science.gov (United States)

North Dakota State Board for Vocational Education, Bismarck.

This guide provides the basic foundation to develop a one-semester course based on the cluster concept, graphic communications. One of a set of six guides for an industrial arts curriculum at the junior high school level, it suggests exploratory experiences designed to (1) develop an awareness and understanding of the drafting and graphic arts…

Collegiate Drug Management Guide.

Science.gov (United States)

Janosik, Steven M.; Anderson, David S.

A checklist to help colleges and universities reevaluate their policies and procedures regarding drug use among college students is presented. It is designed to supplement the "Collegiate Alcohol Risk Assessment Guide." In this guide drugs other than alcohol are of concern, although alcohol is viewed by many as the "drug of choice" among college…

Estimates for the probability of survival of electrons in passing through a radiator

International Nuclear Information System (INIS)

Loos, J.

1977-01-01

Some calculations on the survival of electrons passing through various radiator thicknesses are tabulated. The results of these calculations should serve as a guide for expected attenuation of electrons in the beam when various Pb radiators are inserted

Secondary Maxillary and Orbital Floor Reconstruction With a Free Scapular Flap Using Cutting and Fixation Guides Created by Computer-Aided Design/Computer-Aided Manufacturing.

Science.gov (United States)

Morita, Daiki; Numajiri, Toshiaki; Tsujiko, Shoko; Nakamura, Hiroko; Yamochi, Ryo; Sowa, Yoshihiro; Yasuda, Makoto; Hirano, Shigeru

2017-11-01

Computer-aided design/computer-aided manufacturing (CAD/CAM) guides are now widely used in maxillofacial reconstruction. However, there are few reports of CAD/CAM guides being used for scapular flaps. The authors performed the secondary maxillary and orbital floor reconstruction using a free latissimus dorsi muscle, cutaneous tissue, and scapular flap designed using CAD/CAM techniques in a 72-year-old man who had undergone partial maxillectomy four years previously. The patient had diplopia, the vertical dystopia of eye position, and a large oral-nasal-cutaneous fistula. After the operation, the authors confirmed that the deviation between the postoperative and preoperative planning three-dimensional images was less than 2 mm. Because scapular guides require 3 cutting surfaces, the shape of the scapular guide is more complex than that of a conventional fibular guide. In orbital floor reconstruction, the use of a CAM technique such as that used to manufacture the authors' fixation guide is as necessary for accurate, safe, and easy reconstruction as is preoperative CAD planning. The production of a fixation guide as well as a cutting guide is particularly useful because it is difficult to determine the angle for reconstructing the orbital floor by freehand techniques. In this case, the orbital floor was reconstructed based on a mirror image of the healthy side to avoid overcompression of the orbital tissue. Although the patient's vertical dystopia of eye position was improved, diplopia was not improved because, for greater safety, the authors did not plan overcorrection of the orbital volume.

Guiding the Design of Lessons by Using the MAPLET Framework: Matching Aims, Processes, Learner Expertise and Technologies

Science.gov (United States)

Ifenthaler, Dirk; Gosper, Maree

2014-01-01

This paper introduces the MAPLET framework that was developed to map and link teaching aims, learning processes, learner expertise and technologies. An experimental study with 65 participants is reported to test the effectiveness of the framework as a guide to the design of lessons embedded within larger units of study. The findings indicate the…

FAA Offers Free Guide on Elementary Aviation Education.

Science.gov (United States)

Journal of Aerospace Education, 1978

1978-01-01

Describes a teaching guide in aviation education for grades 2 through 6. The guide contains activities designed to enrich an existing science curriculum. An address for ordering the guide is included. (MA)

Lawyers Admin Law Study Guide

National Research Council Canada - National Science Library

1998-01-01

.... While every effort is made to ensure the accuracy of the study guide, it is the responsibility of the student to supplement the text with independent research. The study guide is designed to be a starting point for research, not a substitute for it.

Effect of image-guided hypofractionated stereotactic radiotherapy on peripheral non-small-cell lung cancer

Directory of Open Access Journals (Sweden)

Wang SW

2016-08-01

Full Text Available Shu-wen Wang,1 Juan Ren,1 Yan-li Yan,2 Chao-fan Xue,2 Li Tan,2 Xiao-wei Ma2 1Department of Radiotherapy, First Affiliated Hospital of Xian Jiaotong University, 2Medical School of Xian Jiaotong University, Xi’an, Shaanxi, People’s Republic of China Abstract: The objective of this study was to compare the effects of image-guided hypofractionated radiotherapy and conventional fractionated radiotherapy on non-small-cell lung cancer (NSCLC. Fifty stage- and age-matched cases with NSCLC were randomly divided into two groups (A and B. There were 23 cases in group A and 27 cases in group B. Image-guided radiotherapy (IGRT and stereotactic radiotherapy were conjugately applied to the patients in group A. Group A patients underwent hypofractionated radiotherapy (6–8 Gy/time three times per week, with a total dose of 64–66 Gy; group B received conventional fractionated radiotherapy, with a total dose of 68–70 Gy five times per week. In group A, 1-year and 2-year local failure survival rate and 1-year local failure-free survival rate were significantly higher than in group B (P<0.05. The local failure rate (P<0.05 and distant metastasis rate (P>0.05 were lower in group A than in group B. The overall survival rate of group A was significantly higher than that of group B (P=0.03, and the survival rate at 1 year was 87% vs 63%, (P<0.05. The median survival time of group A was longer than that of group B. There was no significant difference in the incidence of complications between the two groups (P>0.05. Compared with conventional fractionated radiation therapy, image-guided hypofractionated stereotactic radiotherapy in NSCLC received better treatment efficacy and showed good tolerability. Keywords: non-small-cell lung cancer, hypofractionated radiotherapy, stereotactic radiotherapy, segmentation, intensity-modulated radiotherapy, image-guided radiation therapy technology

A Nurse's Survival Guide to the Ward - Third edition Richards Ann Edwards Sharon A Nurse's Survival Guide to the Ward - Third edition 500pp £19.99 Elsevier 978 0 7020 4603 2 0702046035 [Formula: see text].

Science.gov (United States)

2013-05-08

This guide is a useful 'friend and companion' to keep close at hand. It is an essential reference for nurses, not only on the ward but in every field of practice where patient care is given. In fact, it makes an accessible guide for all healthcare practitioners.

Immune phenotypes predict survival in patients with glioblastoma multiforme

Directory of Open Access Journals (Sweden)

Haouraa Mostafa

2016-09-01

Full Text Available Abstract Background Glioblastoma multiforme (GBM, a common primary malignant brain tumor, rarely disseminates beyond the central nervous system and has a very bad prognosis. The current study aimed at the analysis of immunological control in individual patients with GBM. Methods Immune phenotypes and plasma biomarkers of GBM patients were determined at the time of diagnosis using flow cytometry and ELISA, respectively. Results Using descriptive statistics, we found that immune anomalies were distinct in individual patients. Defined marker profiles proved highly relevant for survival. A remarkable relation between activated NK cells and improved survival in GBM patients was in contrast to increased CD39 and IL-10 in patients with a detrimental course and very short survival. Recursive partitioning analysis (RPA and Cox proportional hazards models substantiated the relevance of absolute numbers of CD8 cells and low numbers of CD39 cells for better survival. Conclusions Defined alterations of the immune system may guide the course of disease in patients with GBM and may be prognostically valuable for longitudinal studies or can be applied for immune intervention.

A surface-electrode quadrupole guide for electrons

Energy Technology Data Exchange (ETDEWEB)

Hoffrogge, Johannes Philipp

2012-12-19

This thesis reports on the design and first experimental realization of a surface-electrode quadrupole guide for free electrons. The guide is based on a miniaturized, planar electrode layout and is driven at microwave frequencies. It confines electrons in the near-field of the microwave excitation, where strong electric field gradients can be generated without resorting to resonating structures or exceptionally high drive powers. The use of chip-based electrode geometries allows the realization of versatile, microstructured potentials with the perspective of novel quantum experiments with guided electrons. I present the design, construction and operation of an experiment that demonstrates electron confinement in a planar quadrupole guide for the first time. To this end, electrons with kinetic energies from one to ten electron-volts are guided along a curved electrode geometry. The stability of electron guiding as a function of drive parameters and electron energy has been studied. A comparison with numerical particle tracking simulations yields good qualitative agreement and provides a deeper understanding of the electron dynamics in the guiding potential. Furthermore, this thesis gives a detailed description of the design of the surface-electrode layout. This includes the development of an optimized coupling structure to inject electrons into the guide with minimum transverse excitation. I also discuss the extension of the current setup to longitudinal guide dimensions that are comparable to or larger than the wavelength of the drive signal. This is possible with a modified electrode layout featuring elevated signal conductors. Electron guiding in the field of a planar, microfabricated electrode layout allows the generation of versatile and finely structured guiding potentials. One example would be the realization of junctions that split and recombine a guided electron beam. Furthermore, it should be possible to prepare electrons in low-lying quantum mechanical

A surface-electrode quadrupole guide for electrons

International Nuclear Information System (INIS)

Hoffrogge, Johannes Philipp

2012-01-01

This thesis reports on the design and first experimental realization of a surface-electrode quadrupole guide for free electrons. The guide is based on a miniaturized, planar electrode layout and is driven at microwave frequencies. It confines electrons in the near-field of the microwave excitation, where strong electric field gradients can be generated without resorting to resonating structures or exceptionally high drive powers. The use of chip-based electrode geometries allows the realization of versatile, microstructured potentials with the perspective of novel quantum experiments with guided electrons. I present the design, construction and operation of an experiment that demonstrates electron confinement in a planar quadrupole guide for the first time. To this end, electrons with kinetic energies from one to ten electron-volts are guided along a curved electrode geometry. The stability of electron guiding as a function of drive parameters and electron energy has been studied. A comparison with numerical particle tracking simulations yields good qualitative agreement and provides a deeper understanding of the electron dynamics in the guiding potential. Furthermore, this thesis gives a detailed description of the design of the surface-electrode layout. This includes the development of an optimized coupling structure to inject electrons into the guide with minimum transverse excitation. I also discuss the extension of the current setup to longitudinal guide dimensions that are comparable to or larger than the wavelength of the drive signal. This is possible with a modified electrode layout featuring elevated signal conductors. Electron guiding in the field of a planar, microfabricated electrode layout allows the generation of versatile and finely structured guiding potentials. One example would be the realization of junctions that split and recombine a guided electron beam. Furthermore, it should be possible to prepare electrons in low-lying quantum mechanical

75 FR 9002 - Draft Regulatory Guide: Issuance, Availability

Science.gov (United States)

2010-02-26

... Guide, DG-3040, ``Design, Construction, and Inspection of Embankment Retention Systems at Fuel Cycle... October 1973. This guide describes some engineering practices and methods generally considered by the NRC to be satisfactory for the design, construction, and inspection of embankment retention systems used...

Improved resection and prolonged overall survival with PD-1-IRDye800CW fluorescence probe-guided surgery and PD-1 adjuvant immunotherapy in 4T1 mouse model

Directory of Open Access Journals (Sweden)

Du Y

2017-11-01

Full Text Available Yang Du,1,2,* Ting Sun,3,* Xiaolong Liang,4,* Yuan Li,3 Zhengyu Jin,3 Huadan Xue,3 Yihong Wan,5 Jie Tian1,2 1CAS Key Laboratory of Molecular Imaging, 2The State Key Laboratory of Management and Control for Complex Systems, Institute of Automation, Chinese Academy of Sciences, 3Department of Radiology, Peking Union Medical College Hospital, 4Department of Ultrasound, Peking University Third Hospital, Beijing, China; 5Department of Pharmacology, University of Texas Southwestern Medical Center, Dallas, TX, USA *These authors contributed equally to this work Abstract: An intraoperative technique to accurately identify microscopic tumor residuals could decrease the risk of positive surgical margins. Several lines of evidence support the expression and immunotherapeutic effect of PD-1 in breast cancer. Here, we sought to develop a fluorescence-labeled PD-1 probe for in vivo breast tumor imaging and image-guided surgery. The efficacy of PD-1 monoclonal antibody (PD-1 mAb as adjuvant immunotherapy after surgery was also assessed. PD-1-IRDye800CW was developed and examined for its application in tumor imaging and image-guided tumor resection in an immunocompetent 4T1 mouse tumor model. Fluorescence molecular imaging was performed to monitor probe biodistribution and intraoperative imaging. Bioluminescence imaging was performed to monitor tumor growth and evaluate postsurgical tumor residuals, recurrences, and metastases. The PD-1-IRDye800CW exhibited a specific signal at the tumor region compared with the IgG control. Furthermore, PD-1-IRDye800CW-guided surgery combined with PD-1 adjuvant immunotherapy inhibited tumor regrowth and microtumor metastases and thus improved survival rate. Our study demonstrates the feasibility of using PD-1-IRDye800CW for breast tumor imaging and image-guided tumor resection. Moreover, PD-1 mAb adjuvant immunotherapy reduces cancer recurrences and metastases emanating from tumor residuals. Keywords: PD-1, programmed cell

Library Guides to Business Information.

Science.gov (United States)

Harris, Jamie L., Comp.

This collection of library guides is designed to introduce undergraduate students at Chicago State University to basic business reference sources. Annotated bibliographies cover the subject areas of business management, marketing, and finance. Guides in the collection include: (1) Researching the Company (Chicago and Illinois business and national…

3D computations of flow field in a guide vane blading designed by means of 2D model for a low head hydraulic turbine

International Nuclear Information System (INIS)

Krzemianowski, Z; Puzyrewski, R

2014-01-01

The paper presents the main parameters of the flow field behind the guide vane cascade designed by means of 2D inverse problem and following check by means of 3D commercial program ANSYS/Fluent applied for a direct problem. This approach of using different models reflects the contemporary design procedure for non-standardized turbomachinery stage. Depending on the model, the set of conservation equation to be solved differs, although the physical background remains the same. The example of computations for guide vane cascade for a low head hydraulic turbine is presented.

Role of contact force-guided radiofrequency catheter ablation for treatment of atrial fibrillation: A systematic review and meta-analysis.

Science.gov (United States)

Lin, Hui; Chen, Yi-He; Hou, Jian-Wen; Lu, Zhao-Yang; Xiang, Yin; Li, Yi-Gang

2017-09-01

CF-sensing catheter emerged as a novel ablation technology and was increasingly used in clinical practice. Nonetheless, available evidence of efficacy and safety comparison between CF-guided RF catheter ablation and non-CF-guided ablation for treatment of AF was still lacking. Twenty-two eligible studies were included after systematic review through the MEDLINE, Google Scholar, the Cochrane Library and PubMed databases. AF/atrial tachycardia-free survival was markedly improved in CF-guided catheter ablation compared with non-CF-guided ablation at a median 12-month follow-up (RR: 1.12, 95% CI: 1.06-1.19, P = 0.000, fixed). Notably, CF-guided catheter ablation presented a robust survival benefit for treatment of paroxysmal AF (RR: 1.10, 95% CI: 1.03-1.18, P = 0.005, fixed), but not persistent AF (RR: 1.07, 95% CI: 0.89-1.28, P = 0.466, fixed). Moreover, procedure time (WMD: -23.87, 95% CI: -33.83 to -13.91, P = 0.000, random), fluoroscopy time (WMD: -7.78, 95% CI: -13.93 to -1.63, P = 0.013, random) and RF time (WMD: -3.98, 95% CI: -7.78 to -0.17, P = 0.040, random) were significantly reduced in CF-guided catheter ablation. The incidence of procedure-related complications did not differ between these two technologies (RR: 0.83, 95% CI: 0.59 to 1.16, P = 0.271, fixed). CF-guided RF catheter ablation was associated with a significant AF/atrial tachycardia-free survival benefit compared with non-CF-guided ablation in patients with paroxysmal AF rather than persistent AF. In addition, CF-guided ablation strategy also reduced the procedure time, fluoroscopy time, as well as RF time despite no distinct effect on the alleviation of procedure-related complications. © 2017 Wiley Periodicals, Inc.

SPSS survival manual a step by step guide to data analysis using SPSS

CERN Document Server

Pallant, Julie

2010-01-01

In this thoroughly revised edition of her bestselling text, now covering up to version 18 of the SPSS software, Julie Pallant guides you through the entire research process, helping you choose the right data analysis technique for your project.

Building bridges between theory and practice in medical education using a design-based research approach: AMEE Guide No. 60.

Science.gov (United States)

Dolmans, Diana H J M; Tigelaar, D

2012-01-01

Medical education research has grown enormously over the past 20 years, but it does not sufficiently make use of theories, according to influential leaders and researchers in this field. In this AMEE Guide, it is argued that design-based research (DBR) studies should be conducted much more in medical education design research because these studies both advance the testing and refinement of theories and advance educational practice. In this Guide, the essential characteristics of DBR as well as how DBR differs from other approach such as formative evaluation are explained. It is also explained what the pitfalls and challenges of DBR are. The main challenges deal with how to insure that DBR studies reveal findings that are of a broader relevance than the local situation and how to insure that DBR contributes toward theory testing and refinement. An example of a series of DBR studies on the design of a teaching portfolio in higher education that is aimed at stimulating a teacher's professional development is described, to illustrate how DBR studies actually work in practice. Finally, it is argued that DBR-studies could play an important role in the advancement of theory and practice in the two broad domains of designing or redesigning work-based learning environments and assessment programs.

Guide to good practices for the design, development, and implementation of examinations

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

The purpose of this Guide to Good Practices is to provide direction to training personnel in the broad areas of design, development, and implementation of examinations. Nuclear facilities spend a significant amount of training resources testing trainees. Tests are used for employee selection, qualification, requalification, certification and recertification, and promotion. Ineffective testing procedures, or inappropriate interpretation of test results, can have significant effects on both human performance and facility operations. Test development requires unique skills, and as with any skill, training and experience are needed to develop the skills. Test development, test use, test result interpretation, and test refinement, like all other aspects of the systematic approach to training, should be part of an ongoing, systematic process. For some users this document will provide a review of ideas and principles with which they are already familiar; for others it will present new concepts. While not intended to provide in-depth coverage of test theory design and development, it should provide developers, instructors, and evaluators with a foundation on which to develop sound examinations.

Practical column design guide

CERN Document Server

Nitsche, M

2017-01-01

This book highlights the aspects that need to be considered when designing distillation columns in practice. It discusses the influencing parameters as well as the equations governing them, and presents several numerical examples. The book is intended both for experienced designers and for those who are new to the subject.

Choice Behavior Guided by Learned, But Not Innate, Taste Aversion Recruits the Orbitofrontal Cortex.

Science.gov (United States)

Ramírez-Lugo, Leticia; Peñas-Rincón, Ana; Ángeles-Durán, Sandybel; Sotres-Bayon, Francisco

2016-10-12

The ability to select an appropriate behavioral response guided by previous emotional experiences is critical for survival. Although much is known about brain mechanisms underlying emotional associations, little is known about how these associations guide behavior when several choices are available. To address this, we performed local pharmacological inactivations of several cortical regions before retrieval of an aversive memory in choice-based versus no-choice-based conditioned taste aversion (CTA) tasks in rats. Interestingly, we found that inactivation of the orbitofrontal cortex (OFC), but not the dorsal or ventral medial prefrontal cortices, blocked retrieval of choice CTA. However, OFC inactivation left retrieval of no-choice CTA intact, suggesting its role in guiding choice, but not in retrieval of CTA memory. Consistently, OFC activity increased in the choice condition compared with no-choice, as measured with c-Fos immunolabeling. Notably, OFC inactivation did not affect choice behavior when it was guided by innate taste aversion. Consistent with an anterior insular cortex (AIC) involvement in storing taste memories, we found that AIC inactivation impaired retrieval of both choice and no-choice CTA. Therefore, this study provides evidence for OFC's role in guiding choice behavior and shows that this is dissociable from AIC-dependent taste aversion memory. Together, our results suggest that OFC is required and recruited to guide choice selection between options of taste associations relayed from AIC. Survival and mental health depend on being able to choose stimuli not associated with danger. This is particularly important when danger is associated with stimuli that we ingest. Although much is known about the brain mechanisms that underlie associations with dangerous taste stimuli, very little is known about how these stored emotional associations guide behavior when it involves choice. By combining pharmacological and immunohistochemistry tools with taste-guided

TRAC User's Guide

International Nuclear Information System (INIS)

Boyack, B.E.; Stumpf, H.; Lime, J.F.

1985-11-01

This guide has been prepared to assist users in applying the Transient Reactor Analysis Code (TRAC). TRAC is an advanced best-estimate systems code for analyzing transients in thermal-hydraulic systems. The code is very general. Because it is general, efforts to model specific nuclear power plants or experimental facilities often present a challenge to the TRAC user. This guide has been written to assist first-time or intermediate users. It is specifically written for the TRAC version designated TRAC-PF1/MOD1. The TRAC User's Guide should be considered a companion document to the TRAC Code Manual; the user will need both documents to use TRAC effectively. 18 refs., 45 figs., 19 tabs

Curriculum Guide for Fashion Merchandising (Fashion Salesperson).

Science.gov (United States)

Gregory, Margaret R.

This curriculum guide is designed to help teachers teach a course in fashion merchandising to high school students. The guide contains eight performance-based learning modules, each consisting of one to seven units. Each unit teaches a job-relevant task, and includes performance objectives, performance guides, resources, learning activities,…

Automatic classification of EpCAM+, Cytokeratin+ objects versus survival in castration resistant prostate cancer

NARCIS (Netherlands)

Ligthart, Sjoerd T.; Coumans, Frank A.W.; Attard, Gert; de Bono, Johann S.; Terstappen, Leon W.M.M.

2010-01-01

Introduction: Circulating tumor cells (CTC) in patients with metastatic carcinomas are associated with poor survival and may guide therapy. CTC are morphologically heterogeneous and many research groups apply different morphological definitions. Manual assignment of CTC is therefore subjective. We

Burnable absorber-integrated Guide Thimble (BigT) - 1. Design concepts and neutronic characterization on the fuel assembly benchmarks

International Nuclear Information System (INIS)

Yahya, Mohd-Syukri; Yu, Hwanyeal; Kim, Yonghee

2016-01-01

This paper presents the conceptual designs of a new burnable absorber (BA) for the pressurized water reactor (PWR), which is named 'Burnable absorber-integrated Guide Thimble' (BigT). The BigT integrates BA materials into standard guide thimble in a PWR fuel assembly. Neutronic sensitivities and practical design considerations of the BigT concept are points of highlight in the first half of the paper. Specifically, the BigT concepts are characterized in view of its BA material and spatial self-shielding variations. In addition, the BigT replaceability requirement, bottom-end design specifications and thermal-hydraulic considerations are also deliberated. Meanwhile, much of the second half of the paper is devoted to demonstrate practical viability of the BigT absorbers via comparative evaluations against the conventional BA technologies in representative 17x17 and 16x16 fuel assembly lattices. For the 17x17 lattice evaluations, all three BigT variants are benchmarked against Westinghouse's existing BA technologies, while in the 16x16 assembly analyses, the BigT designs are compared against traditional integral gadolinia-urania rod design. All analyses clearly show that the BigT absorbers perform as well as the commercial BA technologies in terms of reactivity and power peaking management. In addition, it has been shown that sufficiently high control rod worth can be obtained with the BigT absorbers in place. All neutronic simulations were completed using the Monte Carlo Serpent code with ENDF/B-VII.0 library. (author)

Making Partner: A Mentor's Guide to the Psychological Journey.

Science.gov (United States)

Ibarra, Herminia

2000-01-01

In this era of talent wars, partnerships at professional firms can no longer afford to have a "survival of the fittest" mindset toward the consultants, investment bankers, and junior accountants aspiring to join their ranks. Instead, they must understand--and guide--the complex emotional transformation that every "partner hopeful" must go through.…

Technical Support Document: Development of the Advanced Energy Design Guide for K-12 Schools--30% Energy Savings

Energy Technology Data Exchange (ETDEWEB)

Pless, S.; Torcellini, P.; Long, N.

2007-09-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings (K-12 AEDG), a design guidance document intended to provide recommendations for achieving 30% energy savings in K-12 Schools over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The 30% energy savings target is the first step toward achieving net-zero energy schools; schools that, on an annual basis, draw from outside sources less or equal energy than they generate on site from renewable energy sources.

Intermediate-term results of image-guided brachytherapy and high-technology external beam radiotherapy in cervical cancer: Chiang Mai University experience.

Science.gov (United States)

Tharavichitkul, Ekkasit; Chakrabandhu, Somvilai; Wanwilairat, Somsak; Tippanya, Damrongsak; Nobnop, Wannapha; Pukanhaphan, Nantaka; Galalae, Razvan M; Chitapanarux, Imjai

2013-07-01

To evaluate the outcomes of image-guided brachytherapy combined with 3D conformal or intensity modulated external beam radiotherapy (3D CRT/IMRT) in cervical cancer at Chiang Mai University. From 2008 to 2011, forty-seven patients with locally advanced cervical cancer were enrolled in this study. All patients received high-technology (3D CRT/IMRT) whole pelvic radiotherapy with a total dose of 45-46 Gy plus image-guided High-Dose-Rate intracavitary brachytherapy 6.5-7 Gy × 4 fractions to a High-Risk Clinical Target Volume (HR-CTV) according to GEC-ESTRO recommendations. The dose parameters of the HR-CTV for bladder, rectum and sigmoid colon were recorded, as well as toxicity profiles. In addition, the endpoints for local control, disease-free, metastasis-free survival and overall survival were calculated. At the median follow-up time of 26 months, the local control, disease-free survival, and overall survival rates were 97.9%, 85.1%, and 93.6%, respectively. The mean dose of HR-CTV, bladder, rectum and sigmoid were 93.1, 88.2, 69.6, and 72 Gy, respectively. In terms of late toxicity, the incidence of grade 3-4 bladder and rectum morbidity was 2.1% and 2.1%, respectively. A combination of image-guided brachytherapy and IMRT/3D CRT showed very promising results of local control, disease-free survival, metastasis-free survival and overall survival rates. It also caused a low incidence of grade 3-4 toxicity in treated study patients. Copyright © 2013 Elsevier Inc. All rights reserved.

46 CFR 108.525 - Survival craft number and arrangement.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft number and arrangement. 108.525 Section... UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.525 Survival craft number and arrangement. (a... arrangement of survival craft: (1) Lifeboats with an aggregate capacity to accommodate the total number of...

Machine Accounting. An Instructor's Guide.

Science.gov (United States)

Gould, E. Noah, Ed.

Designed to prepare students to operate the types of accounting machines used in many medium-sized businesses, this instructor's guide presents a full-year high school course in machine accounting covering 120 hours of instruction. An introduction for the instructor suggests how to adapt the guide to present a 60-hour module which would be…

Design and Implementation of an Electronic Front-End Based on Square Wave Excitation for Ultrasonic Torsional Guided Wave Viscosity Sensor

Directory of Open Access Journals (Sweden)

Amir Rabani

2016-10-01

Full Text Available The market for process instruments generally requires low cost devices that are robust, small in size, portable, and usable in-plant. Ultrasonic torsional guided wave sensors have received much attention by researchers for measurement of viscosity and/or density of fluids in recent years. The supporting electronic systems for these sensors providing many different settings of sine-wave signals are bulky and expensive. In contrast, a system based on bursts of square waves instead of sine waves would have a considerable advantage in that respect and could be built using simple integrated circuits at a cost that is orders of magnitude lower than for a windowed sine wave device. This paper explores the possibility of using square wave bursts as the driving signal source for the ultrasonic torsional guided wave viscosity sensor. A simple design of a compact and fully automatic analogue square wave front-end for the sensor is also proposed. The successful operation of the system is demonstrated by using the sensor for measuring the viscosity in a representative fluid. This work provides the basis for design and manufacture of low cost compact standalone ultrasonic guided wave sensors and enlightens the possibility of using coded excitation techniques utilising square wave sequences in such applications.

Accuracy of computer-assisted template-guided autotransplantation of teeth with custom three-dimensional designed/printed surgical tooling : A cadaveric study

NARCIS (Netherlands)

Anssari Moin, D.; Verweij, J.P.; Waars, H.; van Merkesteyn, R.; Wismeijer, D.

2017-01-01

Purpose: The aim of the present cadaveric study was to assess the accuracy of computer-assisted template-guided autotransplantation of teeth with custom 3-dimensional (3D) designed/printed surgical tooling. Materials and Methods: Ten partially edentulous human mandibular cadavers were scanned using

Joint survival probability via truncated invariant copula

International Nuclear Information System (INIS)

Kim, Jeong-Hoon; Ma, Yong-Ki; Park, Chan Yeol

2016-01-01

Highlights: • We have studied an issue of dependence structure between default intensities. • We use a multivariate shot noise intensity process, where jumps occur simultaneously and their sizes are correlated. • We obtain the joint survival probability of the integrated intensities by using a copula. • We apply our theoretical result to pricing basket default swap spread. - Abstract: Given an intensity-based credit risk model, this paper studies dependence structure between default intensities. To model this structure, we use a multivariate shot noise intensity process, where jumps occur simultaneously and their sizes are correlated. Through very lengthy algebra, we obtain explicitly the joint survival probability of the integrated intensities by using the truncated invariant Farlie–Gumbel–Morgenstern copula with exponential marginal distributions. We also apply our theoretical result to pricing basket default swap spreads. This result can provide a useful guide for credit risk management.

Cross-Validation of Survival Bump Hunting by Recursive Peeling Methods.

Science.gov (United States)

Dazard, Jean-Eudes; Choe, Michael; LeBlanc, Michael; Rao, J Sunil

2014-08-01

We introduce a survival/risk bump hunting framework to build a bump hunting model with a possibly censored time-to-event type of response and to validate model estimates. First, we describe the use of adequate survival peeling criteria to build a survival/risk bump hunting model based on recursive peeling methods. Our method called "Patient Recursive Survival Peeling" is a rule-induction method that makes use of specific peeling criteria such as hazard ratio or log-rank statistics. Second, to validate our model estimates and improve survival prediction accuracy, we describe a resampling-based validation technique specifically designed for the joint task of decision rule making by recursive peeling (i.e. decision-box) and survival estimation. This alternative technique, called "combined" cross-validation is done by combining test samples over the cross-validation loops, a design allowing for bump hunting by recursive peeling in a survival setting. We provide empirical results showing the importance of cross-validation and replication.

Lawyers Admin Law. Study Guide (Revision)

National Research Council Canada - National Science Library

1997-01-01

.... While every effort is made to ensure the accuracy of the study guide, it is the responsibility of the student to supplement the text with independent research. The study guide is designed to be a starting point for research, not a substitute for it.

Building Maintenance. Florida Vocational Program Guide.

Science.gov (United States)

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This program guide identifies primary concerns in the organization, operation, and evaluation of a building maintenance program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary of Occupational Titles…

Toward Eco Product Development with Qualitative and CAE Design Process - Case Study of Flame Guiding Module

Science.gov (United States)

Chen, W. L.; Chao, F. L.

2018-04-01

Sustainable products become increasingly important for company in addressing eco-performance to satisfy global environmental regulations. Case study of flame guiding module reviewed design process and concerns related to the torch design. For enhancing flame height, the torch was embedded with an airflow guidance structure. The design process and design methodologies were investigated as an eco-design case study. Combine qualitative and CAE simulation were proposed to fulfil its main and auxiliary functions including reduction of impact during use. The design guidelines help prevent mistake arrangements, CAE helps understand combustion phenomenon. The flow field simulation enables fine tune of geometric design. Functional test and measurement are carried out to confirm the product features. On Eco-performance, we choose 5 items for evaluation the status of previous and redesign module, namely function need, low impact material, few manufacturing steps, low energy consumption, and safety. The radar diagram indicates that eco-performance of redesign module is better. Life cycle assessment calculated the carbon footprint of the manufacturing and processing stage with Eco-it. By using recycled steel in the flame module, it reduces raw material stage carbon footprint significantly.

Design of a high efficiency relativistic backward wave oscillator with low guiding magnetic field

Energy Technology Data Exchange (ETDEWEB)

Li, Xiaoze; Song, Wei; Tan, Weibing; Zhang, Ligang; Su, Jiancang; Zhu, Xiaoxin; Hu, Xianggang; Shen, Zhiyuan; Liang, Xu; Ning, Qi [Science and Technology on High Power Microwave Laboratory, Northwest Institute of Nuclear Technology, Xi' an 710024 (China)

2016-07-15

A high efficiency relativistic backward wave oscillator working at a low guiding magnetic field is designed and simulated. A trapezoidal resonant reflector is used to reduce the modulation field in the resonant reflector to avoid overmodulation of the electron beam which will lead to a large momentum spread and then low conversion efficiency. The envelope of the inner radius of the slow wave structure (SWS) increases stepwise to keep conformal to the trajectory of the electron beam which will alleviate the bombardment of the electron on the surface of the SWS. The length of period of the SWS is reduced gradually to make a better match between phase velocity and electron beam, which decelerates continually and improves the RF current distribution. Meanwhile the modulation field is reduced by the introduction of nonuniform SWS also. The particle in cell simulation results reveal that a microwave with a power of 1.8 GW and a frequency of 14.7 GHz is generated with an efficiency of 47% when the diode voltage is 620 kV, the beam current 6.1 kA, and the guiding magnetic field 0.95 T.

Radiation shielding for neutron guides

International Nuclear Information System (INIS)

Ersez, T.; Braoudakis, G.; Osborn, J.C.

2005-01-01

Full text: Models of the neutron guide shielding for the out of bunker guides on the thermal and cold neutron beam lines of the OPAL Reactor (ANSTO) were constructed using the Monte Carlo code MCNP 4B. The neutrons that were not reflected inside the guides but were absorbed by the supermirror (SM) layers were noted to be a significant source of gammas. Gammas also arise from neutrons absorbed by the B, Si, Na and K contained in the glass. The proposed shielding design has produced compact shielding assemblies. These arrangements are consistent with safety requirements, floor load limits, and cost constraints. To verify the design a prototype was assembled consisting of 120mm thick Pb(96%)Sb(4%) walls resting on a concrete block. There was good agreement between experimental measurements and calculated dose rates for bulk shield regions. (authors)

Radiation shielding for neutron guides

International Nuclear Information System (INIS)

Ersez, T.; Braoudakis, G.; Osborn, J.C.

2006-01-01

Models of the neutron guide shielding for the out of bunker guides on the thermal and cold neutron beam lines of the OPAL Reactor (ANSTO) were constructed using the Monte Carlo code MCNP 4B. The neutrons that were not reflected inside the guides but were absorbed by the supermirror (SM) layers were noted to be a significant source of gammas. Gammas also arise from neutrons absorbed by the B, Si, Na and K contained in the glass. The proposed shielding design has produced compact shielding assemblies. These arrangements are consistent with safety requirements, floor load limits, and cost constraints. To verify the design a prototype was assembled consisting of 120 mm thick Pb(96%)Sb(4%) walls resting on a concrete block. There was good agreement between experimental measurements and calculated dose rates for bulk shield regions

?Off-Spotter?: very fast and exhaustive enumeration of genomic lookalikes for designing CRISPR/Cas guide RNAs

OpenAIRE

Pliatsika, Venetia; Rigoutsos, Isidore

2015-01-01

Background CRISPR/Cas (Clustered Regularly Interspaced Short Palindromic Repeats/CRISPR associated nucleases) is a powerful component of the prokaryotic immune system that has been adapted for targeted genetic engineering in higher organisms. A key element of CRISPR/Cas is the ?guide? RNA (gRNA) that is ~20 nucleotides (nts) in length and designed to be complementary to the intended target site. An integral requirement of the CRISPR/Cas system is that the target site be followed by a protospa...

Malariotherapy at Mont Park: the earliest surviving movie of psychiatric treatment in Australia.

Science.gov (United States)

Kaplan, Robert M

2013-02-01

A movie on malariotherapy for neurosyphilis made at Mont Park and filmed by Reg Ellery in 1926 is believed to be the oldest surviving movie of psychiatric treatment in Australia. The objective is to review the movie and discuss the background and context of the film, which shows the conditions of patients in a psychiatric hospital in the 1920s. Movie film is a guide to a psychiatric past that is rapidly being forgotten. The Ellery movie is an incentive to collect surviving footage before it is too late.

Design, Implementation and Analysis of Learner-Centered Guided In-Service Programme for Technical Teacher Education

Directory of Open Access Journals (Sweden)

Tiia Rüütmann

2014-03-01

Full Text Available The design of learner-centered guided in-service program for technical teacher education has been launched at Estonian Centre for Engineering Pedagogy at Tallinn University of Technology. The aim of the program has been facilitating the initial in-service teaching experience, involving mentoring, peer support and cognitive apprenticeship. The emphasis has been on teaching for knowledge application, including the choice of content and processes, motivation, reflection, problem-solving, choice of educational technology, effective teaching methods, teaching models and strategies ཿ concepts, tools and procedures of the field of engineering, organized in ways enabling teachers to formulate real world problems, apply and solve them. The program has been implemented since 2012 and covers IGIP curriculum requirements. In the present article the designed program is described and analyzed.

Specifications for human factors guiding documents

Energy Technology Data Exchange (ETDEWEB)

Rhodes, W; Szlapetis, I; MacGregor, C [Rhodes and Associates Inc., Toronto, ON (Canada)

1995-04-01

This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs.

Specifications for human factors guiding documents

International Nuclear Information System (INIS)

Rhodes, W.; Szlapetis, I.; MacGregor, C.

1995-04-01

This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs

A Curriculum Guide for Electricity/Electronics.

Science.gov (United States)

Rouse, Bill, Comp.

This curriculum guide is designed to upgrade the secondary electrical trades program in Mississippi by broadening its scope to incorporate basic electronic principles. Covered in the individual chapters of the guide are the following courses: basic electricity (occupational information, basic physics, circuit fundamentals, resistance and Ohm's…

The development of remote controlled linear guide and mast vertical guide of repair robot for RV head CRDM nozzle region in NPP

International Nuclear Information System (INIS)

Kim, Seung Ho; Seo, Yong Chil; Shin, Ho Cheol; Lee, Sung Uk; Jung, Kyung Min

2006-11-01

Reactor vessel which is core instrument in NPP must maintains integrity in the high temperature, high pressure and high radiation environment. Therefore RV must be inspected periodically. If there is defect, the RV must be repaired. A remote controlled linear guide and a vertical guide were developed for a welding repair robot of the RV head CRDM nozzle region. During inspection/maintenance, the RV head is placed RV head storage which is a double circled concrete structure. A linear guide was developed to provide a linear motion to the repair robot, which locates the robot under the RV head. The linear guide also provides a strong support to the robot not to overturn when the robot repairs the RV head. The robot needs lifting about 2m to reach the CRDM nozzle, therefore a vertical guide was developed. For easy traveling, the linear guide is designed 4 parts and the vertical guide is designed 3 parts. A control system was developed to remotely control the guide system which is composed of a connecter box, cables, control box, a computer and a control program. A monitoring system was developed to monitor operation of the guide system

The development of remote controlled linear guide and mast vertical guide of repair robot for RV head CRDM nozzle region in NPP

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Ho; Seo, Yong Chil; Shin, Ho Cheol; Lee, Sung Uk; Jung, Kyung Min

2006-11-15

Reactor vessel which is core instrument in NPP must maintains integrity in the high temperature, high pressure and high radiation environment. Therefore RV must be inspected periodically. If there is defect, the RV must be repaired. A remote controlled linear guide and a vertical guide were developed for a welding repair robot of the RV head CRDM nozzle region. During inspection/maintenance, the RV head is placed RV head storage which is a double circled concrete structure. A linear guide was developed to provide a linear motion to the repair robot, which locates the robot under the RV head. The linear guide also provides a strong support to the robot not to overturn when the robot repairs the RV head. The robot needs lifting about 2m to reach the CRDM nozzle, therefore a vertical guide was developed. For easy traveling, the linear guide is designed 4 parts and the vertical guide is designed 3 parts. A control system was developed to remotely control the guide system which is composed of a connecter box, cables, control box, a computer and a control program. A monitoring system was developed to monitor operation of the guide system.

Optimization of multi-channel neutron focusing guides for extreme sample environments

International Nuclear Information System (INIS)

Di Julio, D D; Lelièvre-Berna, E; Andersen, K H; Bentley, P M; Courtois, P

2014-01-01

In this work, we present and discuss simulation results for the design of multichannel neutron focusing guides for extreme sample environments. A single focusing guide consists of any number of supermirror-coated curved outer channels surrounding a central channel. Furthermore, a guide is separated into two sections in order to allow for extension into a sample environment. The performance of a guide is evaluated through a Monte-Carlo ray tracing simulation which is further coupled to an optimization algorithm in order to find the best possible guide for a given situation. A number of population-based algorithms have been investigated for this purpose. These include particle-swarm optimization, artificial bee colony, and differential evolution. The performance of each algorithm and preliminary results of the design of a multi-channel neutron focusing guide using these methods are described. We found that a three-channel focusing guide offered the best performance, with a gain factor of 2.4 compared to no focusing guide, for the design scenario investigated in this work.

Mastering IDEAScript the definitive guide

CERN Document Server

Mueller, John Paul

2011-01-01

With approximately 44,000 users in the U.S. and Canada, as well as 42,000 in Europe, IDEA software has become a leading provider of data analysis software for use by auditors and accountants. Written to provide users with a quick access guide for optimal use of IDEAScript, Mastering IDEAScript: The Definitive Guide is IDEA's official guide to mastering IDEAScript, covering essential topics such as Introducing IDEAScript, Understanding the Basics of IDEAScript Editor, Designing Structured Applications, Understanding IDEA Databases and much more. For auditors, accountants and controllers.

Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks

Directory of Open Access Journals (Sweden)

Silvio Mario Meloni

2013-01-01

Full Text Available Purpose. The aim of this study was to analyze the clinical and radiographic outcomes of 23 edentulous jaws treated with 3D software planning, guided surgery, and immediate loading and restored with CAD-CAM full arch frameworks. Materials and Methods. This work was designed as a prospective case series clinical study. Twenty patients have been consecutively rehabilitated with an immediately loaded implant supported fixed full prosthesis. A total of 120 fixtures supporting 23 bridges were placed. 117 out of 120 implants were immediately loaded. Outcome measures were implants survival, radiographic marginal bone levels and remodeling, soft tissue parameters, and complications. Results. 114 of 117 implants reached a 30 months follow-up, and no patients dropped out from the study. The cumulative survival rate was 97.7%; after 30 months, mean marginal bone level was  mm, mean marginal bone remodeling value was , mean PPD value was  mm, and mean BOP value was 4% ± 2.8%. Only minor prosthetic complications were recorded. Conclusion. Within the limitations of this study, it can be concluded that computer-guided surgery and immediate loading seem to represent a viable option for the immediate rehabilitations of completely edentulous jaws with fixed implant supported restorations. This trial is registered with Clinicaltrials.gov NCT01866696.

Improving fish survival through turbines

International Nuclear Information System (INIS)

Ferguson, J.W.

1993-01-01

Much of what is known about fish passage through hydroturbines has been developed by studying migratory species of fish passing through large Kaplan turbine units. A review of the literature on previous fish passage research presented in the accompanying story illustrates that studies have focused on determining mortality levels, rather than identifying the causal mechanism involved. There is a need for understanding how turbine designs could be altered to improve fish passage conditions, how to retrofit existing units, and how proposed hydro plant operational changes may affect fish survival. The US Army Corps of Engineers has developed a research program to define biologically based engineering criteria for improving fish passage conditions. Turbine designs incorporating these criteria can be evaluated for their effects on fish survival, engineering issues, costs, and power production. The research program has the following objectives: To gain a thorough knowledge of the mechanisms of fish mortality; To define the biological sensitivities of key fish species to these mechanisms of mortality; To develop new turbine design criteria to reduce fish mortality; To construct prototype turbine designs, and to test these designs for fish passage, hydro-mechanical operation, and power production; and To identify construction and power costs associated with new turbine designs

Destination: Marshall Islands. Video Guide.

Science.gov (United States)

Legowski, Margaret

This video guide was developed by the Peace Corps' Office of World Wise Schools. Activities that the guide describes are for use in a 3- to 5-day unit on one of the nations of Oceania, the Republic of the Marshall Islands. The activities are designed to provide students with opportunities to: (1) compare and contrast Marshallese and U.S. culture;…

Assessing Online Learning Objects: Student Evaluation of a Guide on the Side Interactive Learning Tutorial Designed by SRJC Libraries

Science.gov (United States)

Virtue, Alicia; Dean, Ellen; Matheson, Molly

2014-01-01

More and more of today's scholars conduct their research in a digital realm rather than using a print collection. The University of Arizona Libraries Guide on the Side tutorial software offers an opportunity to apply the principles of active learning with real world research scenarios. This paper reports on the design and introduction of…

A PhD is not enough! a guide to survival in science

CERN Document Server

Feibelman, Peter J

2011-01-01

A Ph. D. Is Not Enough! is required reading for anyone thinking of applying to graduate school or entering the science job market. Focusing on critical survival skills, it offers sound advice on selecting a thesis or postdoctoral adviser; choosing among research jobs in academia, government laboratories, and industry; and defining a research program. This new edition features updates throughout and a new chapter reflecting todays rapidly changing world.

Helping Youth Decide: A Workshop Guide.

Science.gov (United States)

Duquette, Donna Marie; Boo, Katherine

This guide was written to complement the publication "Helping Youth Decide," a manual designed to help parents develop effective parent-child communication and help their children make responsible decisions during the adolescent years. The workshop guide is intended to assist people who work with families to provide additional information and…

Mathematics: Foundations for Business. Instructor's Guide.

Science.gov (United States)

Hopfe, Manfred W.; Bianci-Rossi, Larry

This is the instructor's guide to a text designed for the contemporary business student who frequently questions the need for studying mathematics. The text material is presented in a "building-block" fashion, with skills learned in earlier chapters organized to provide a smooth transition into more difficult topics. This guide consists…

Safety Information System Guide

International Nuclear Information System (INIS)

Bullock, M.G.

1977-03-01

This Guide provides guidelines for the design and evaluation of a working safety information system. For the relatively few safety professionals who have already adopted computer-based programs, this Guide may aid them in the evaluation of their present system. To those who intend to develop an information system, it will, hopefully, inspire new thinking and encourage steps towards systems safety management. For the line manager who is working where the action is, this Guide may provide insight on the importance of accident facts as a tool for moving ideas up the communication ladder where they will be heard and acted upon; where what he has to say will influence beneficial changes among those who plan and control his operations. In the design of a safety information system, it is suggested that the safety manager make friends with a computer expert or someone on the management team who has some feeling for, and understanding of, the art of information storage and retrieval as a new and better means for communication

Short-term outcomes and safety of computed tomography-guided percutaneous microwave ablation of solitary adrenal metastasis from lung cancer: A multi-center retrospective study

Energy Technology Data Exchange (ETDEWEB)

Men, Min; Ye, Xin; Yang, Xia; Zheng, Aimin; Huang, Guang Hui; Wei, Zhigang [Dept. of Oncology, Shandong Provincial Hospital Affiliated with Shandong University, Jinan (China); Fan, Wei Jun [Imaging and Interventional Center, Sun Yat-sen University Cancer Center, Guangzhou (China); Zhang, Kaixian [Dept. of Oncology, Teng Zhou Central People' s Hospital Affiliated with Jining Medical College, Tengzhou (China); Bi, Jing Wang [Dept. of Oncology, Jinan Military General Hospital of Chinese People' s Liberation Army, Jinan (China)

2016-11-15

To retrospectively evaluate the short-term outcomes and safety of computed tomography (CT)-guided percutaneous microwave ablation (MWA) of solitary adrenal metastasis from lung cancer. From May 2010 to April 2014, 31 patients with unilateral adrenal metastasis from lung cancer who were treated with CT-guided percutaneous MWA were enrolled. This study was conducted with approval from local Institutional Review Board. Clinical outcomes and complications of MWA were assessed. Their tumors ranged from 1.5 to 5.4 cm in diameter. After a median follow-up period of 11.1 months, primary efficacy rate was 90.3% (28/31). Local tumor progression was detected in 7 (22.6%) of 31 cases. Their median overall survival time was 12 months. The 1-year overall survival rate was 44.3%. Median local tumor progression-free survival time was 9 months. Local tumor progression-free survival rate was 77.4%. Of 36 MWA sessions, two (5.6%) had major complications (hypertensive crisis). CT-guided percutaneous MWA may be fairly safe and effective for treating solitary adrenal metastasis from lung cancer.

INCOMMANDS TDP: Human Factors Design and Evaluation Guide (PDT INCOMMANDS: Guide de Conception et d’Evaluation des Facteurs Humains)

Science.gov (United States)

2009-12-01

Human-Computer Interface (AHCI) Style Guide, (Report No. 64201-97U/61223), Veridian, Veda Operations, Dayton Ohio. [13] CSFAB Osga, G. and Kellmeyer, D...Interface (AHCI) Style Guide, (Report No. 64201-97U/61223), Veridian, Veda Operations, Dayton Ohio. [14] Osga, G. and Kellmeyer, D. (2000), Combat

The importance of the instructional guide in the design of virtual learning environments

Directory of Open Access Journals (Sweden)

Aida Mercedes Gomez-Suarez

2017-07-01

Full Text Available The appropriation of information and communication technologies (ICTs in the processes of teaching and learning is one of the main challenges of educational institutions and teachers in the current society of knowledge, as responsible for a use Rational and meaningful use of its digital educational resources (RED. This involves developing competencies in the implementation of ICT in the classroom to enrich the learning environments. This article presents a reflection on the instructional guide as a didactic tool in the elaboration of RED that facilitates the design of these resources to support the activities of the classroom in these processes. This reflection is the result of a research on the subject carried out in a context of university teaching

New design for the UCO/Lick Observatory CCD guide camera

Science.gov (United States)

Wei, Mingzhi; Stover, Richard J.

1996-03-01

A new CCD based field acquisition and telescope guiding camera is being designed and built at UCO/Lick Observatory. Our goal is a camera which is fully computer controllable, compact in size, versatile enough to provide a wide variety of image acquisition modes, and able to operate with a wide variety of CCD detectors. The camera will improve our remote-observing capabilities since it will be easy to control the camera and obtain images over the Observatory computer network. To achieve the desired level of operating flexibility, the design incorporates state-of-the-art technologies such as high density, high speed programmable logic devices and non-volatile static memory. Various types of CCDs can be used in this system without major modification of the hardware or software. Though fully computer controllable, the camera can be operated as a stand-alone unit with most operating parameters set locally. A stand-alone display subsystem is also available. A thermoelectric device is used to cool the CCD to about -45c. Integration times can be varied over a range of 0.1 to 1000 seconds. High speed pixel skipping in both horizontal and vertical directions allows us to quickly access a selected subarea of the detector. Three different read out speeds allow the astronomer to select between high-speed/high-noise and low-speed/low-noise operation. On- chip pixel binning and MPP operation are also selectable options. This system can provide automatic sky level measurement and subtraction to accommodate dynamically changing background levels.

Procedure guide of design, construction of prototypes, calibration and sure operation of nucleonic control systems

International Nuclear Information System (INIS)

Banados Perez, H.; Griffith Martinez, J.; Desdin Garcia, L.F.; Rodriguez Cardona, R.L.; Molina, G.; Sebastian Calvo, C.

1999-01-01

This Guide was elaborated in the mark of the project RLA/8/024 ARCAL XLII 'Industrial Applications of the Tracer Technology and Nucleonic Control Systems'. Its objective is to establish the approaches for the design, the construction, the selection and the procedures for the sure operation of the Nucleonic Control Systems (NCS) in the industry. The NCS is used to control processes to high speeds, materials with extreme conditions or with noxious chemical properties, susceptible materials of being damaged by contact and packed products. In this document is defined the scope of the procedure. The SCN are classified according to: type of radiations, the mobility of the components, the degree of the beams collimation; and in function of the security. The design and construction criteria of the nuclear meters and of the systems of control nucleonic are exposed

46 CFR 108.540 - Survival craft muster and embarkation arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft muster and embarkation arrangements. 108... OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.540 Survival craft muster and... craft muster station and embarkation station for a survival craft which is boarded before it is launched...

Sequence-specific antimicrobials using efficiently delivered RNA-guided nucleases.

Science.gov (United States)

Citorik, Robert J; Mimee, Mark; Lu, Timothy K

2014-11-01

Current antibiotics tend to be broad spectrum, leading to indiscriminate killing of commensal bacteria and accelerated evolution of drug resistance. Here, we use CRISPR-Cas technology to create antimicrobials whose spectrum of activity is chosen by design. RNA-guided nucleases (RGNs) targeting specific DNA sequences are delivered efficiently to microbial populations using bacteriophage or bacteria carrying plasmids transmissible by conjugation. The DNA targets of RGNs can be undesirable genes or polymorphisms, including antibiotic resistance and virulence determinants in carbapenem-resistant Enterobacteriaceae and enterohemorrhagic Escherichia coli. Delivery of RGNs significantly improves survival in a Galleria mellonella infection model. We also show that RGNs enable modulation of complex bacterial populations by selective knockdown of targeted strains based on genetic signatures. RGNs constitute a class of highly discriminatory, customizable antimicrobials that enact selective pressure at the DNA level to reduce the prevalence of undesired genes, minimize off-target effects and enable programmable remodeling of microbiota.

Design procedures for heat-straightening repair : an engineering guide.

Science.gov (United States)

1992-12-01

This report summarizes over four years of research on heat-straightening repairs and provides a prototype engineering guide for the application of heat-straightening to bridge structures. It is based on the research results detailed in a companion re...

A comparison of individualized treatment guided by VeriStrat with standard of care treatment strategies in patients receiving second-line treatment for advanced non-small cell lung cancer: A cost-utility analysis.

Science.gov (United States)

Nelson, Richard E; Stenehjem, David; Akerley, Wallace

2013-12-01

Two therapies are appropriate as 2nd-line treatment of non-small cell lung cancer (NSCLC) patients: chemotherapy and epidermal growth factor receptor (EGFR) inhibitor therapy. VeriStrat, a serum proteomic test, can be used to guide treatment decisions for NSCLC patients. The test classifies patients as likely to benefit from either of these two treatment options. The objective of this research was to model the anticipated survival and cost-effectiveness of four different treatment strategies: chemotherapy for all patients (C-all), EGFR inhibitor for all (E-all), a performance status guided selection strategy (PS-guided), and a strategy guided by VeriStrat test results (V-guided). We developed a Markov model with the perspective of the U.S. health care system. Model inputs were taken from published literature for the base-case analysis. One-way and probabilistic sensitivity analyses were performed. The C-all treatment strategy showed the best overall survival outcome (10.1 months), followed by V-guided (9.6 months), PS-guided (9.2 months), and E-all (8.2 months) strategies. The incremental cost-effectiveness ratio (ICER) of a V-guided treatment strategy was $91,111 (vs. E-all) and $8462 (vs. PS-guided) per quality-adjusted life year (QALY). The ICER for C-all compared to V-guided was $105,616. This cost-utility analysis indicates that a treatment strategy guided by the VeriStrat test in patients receiving second-line therapy for NSCLC may experience an overall survival benefit at an incremental cost-effectiveness ratio that is reasonable when compared with other practices, including cancer treatments, generally covered in the U.S. health care system. However, treating all patients with chemotherapy yielded the greatest expected survival. Copyright © 2013. Published by Elsevier Ireland Ltd.

Three-dimensional plotting and printing of an implant drilling guide: simplifying guided implant surgery.

Science.gov (United States)

Flügge, Tabea Viktoria; Nelson, Katja; Schmelzeisen, Rainer; Metzger, Marc Christian

2013-08-01

To present an efficient workflow for the production of implant drilling guides using virtual planning tools. For this purpose, laser surface scanning, cone beam computed tomography, computer-aided design and manufacturing, and 3-dimensional (3D) printing were combined. Intraoral optical impressions (iTero, Align Technologies, Santa Clara, CA) and digital 3D radiographs (cone beam computed tomography) were performed at the first consultation of 1 exemplary patient. With image processing techniques, the intraoral surface data, acquired using an intraoral scanner, and radiologic 3D data were fused. The virtual implant planning process (using virtual library teeth) and the in-office production of the implant drilling guide was performed after only 1 clinical consultation of the patient. Implant surgery with a computer-aided design and manufacturing produced implant drilling guide was performed during the second consultation. The production of a scan prosthesis and multiple preoperative consultations of the patient were unnecessary. The presented procedure offers another step in facilitating the production of drilling guides in dental implantology. Four main advantages are realized with this procedure. First, no additional scan prosthesis is needed. Second, data acquisition can be performed during the first consultation. Third, the virtual planning is directly transferred to the drilling guide without a loss of accuracy. Finally, the treatment cost and time required are reduced with this facilitated production process. Copyright © 2013 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Double Guided Surgery in All-on-4® Concept: When Ostectomy Is Needed

Directory of Open Access Journals (Sweden)

Gabriele Tonellini

2018-01-01

Full Text Available Background. The rehabilitation of edentulous jaws with guided and flapless surgery applied to the All-on-4 concepts is a predictable treatment with a high implant and prosthetic survival rates, but there are several contraindications for this technique like when bone reduction is needed due to a high smile line in the maxilla or when there is an irregular or thin bone crest. Purpose. To report a technique with double guided surgery for bone reduction and implant placement with the All-on-4 concept. Materials and Methods. 7 patients were included in the study. Guided implant planning was performed using CBCT, and the virtual templates were created with three dedicated software. Custom surgical templates were made for the ostectomy and for implants positioning. Results. 28 implants were placed using a double bone-supported surgical guide. The mean angular errors between the preoperative-planned implant and the postoperative-placed implant were 2.155° ± 2.03°; the mean distance errors between the planned and the placed implants were 0.763 mm ± 0.55 mm on the shoulder implant and 0.570 mm ± 0.40 mm on the apex implant. Conclusions. The results of our study indicate that this treatment is predictable with an excellent survival rate allowing excellent results even when bone reduction is mandatory.

10 CFR Appendix I to Part 50 - Numerical Guides for Design Objectives and Limiting Conditions for Operation To Meet the...

Science.gov (United States)

2010-01-01

... pathways and individual receptors as actually exist at the time the plant is licensed. 2. The... Reactor Effluents SECTION I. Introduction. Section 50.34a provides that an application for a construction... guides on design objectives set forth in this section may be used by an applicant for a construction...

Implant survival after total elbow arthroplasty

DEFF Research Database (Denmark)

Plaschke, Hans Christian; Thillemann, Theis M; Brorson, Stig

2014-01-01

in 234 patients at a mean follow-up of 8.7 years (range, 0-27 years). The overall 5-year survival was 90% (95% confidence interval [CI], 88%-94%), and 10-year survival was 81% (95% CI, 76%-86%). TEAs performed with the unlinked design had a relative risk of revision of 1.9 (95% CI, 1.1-3.2) compared...... was to evaluate implant survival and risk factors for revision of TEAs inserted in patients in the eastern part of Denmark in the period from 1980 until 2008. MATERIAL AND METHODS: The Danish National Patient Register provided personal identification numbers for patients who underwent TEA procedures from 1980...

Comparing the catch composition, profitability and discard survival from different trammel net designs targeting common spiny lobster (Palinurus elephas in a Mediterranean fishery

Directory of Open Access Journals (Sweden)

Gaetano Catanese

2018-05-01

Full Text Available In the Balearic Islands, different trammel net designs have been adopted to promote fisheries sustainability and reduce discards. Here, we compare the catch performance of three trammel net designs targeting the spiny lobster Palinurus elephas in terms of biomass, species composition and revenue from commercial catches and discards. Designs differ in the netting fiber type (standard polyfilament, PMF, or a new polyethylene multi-monofilament, MMF and the use of a guarding net or greca, a mesh piece intended to reduce discards. Catches were surveyed by an on-board observer from 1,550 netting walls corresponding to 70 nets. The number of marketable species captured indicated that the lobster trammel net fishery has multiple targets, which contribute significantly to the total revenue. The discarded species ranged from habitat-forming species to elasmobranches, but the magnitude of gear-habitat interactions on the long term dynamics of benthos remains unclear. No relevant differences in revenue and weight of discards were detected after Bayesian analyses. However, the species composition of discards was different when using greca. Interestingly, high immediate survival was found for discarded undersized lobsters, while a seven day survival assessment, using captive observation, gave an asymptotic estimate of survival probability as 0.64 (95% CI [0.54–0.76]. Therefore, it is recommended that it would be beneficial for this stock if an exemption from the EU landing obligation regulation was sought for undersized lobsters in the Balearic trammel net fishery.

Comparing the catch composition, profitability and discard survival from different trammel net designs targeting common spiny lobster (Palinurus elephas) in a Mediterranean fishery.

Science.gov (United States)

Catanese, Gaetano; Hinz, Hilmar; Gil, Maria Del Mar; Palmer, Miquel; Breen, Michael; Mira, Antoni; Pastor, Elena; Grau, Amalia; Campos-Candela, Andrea; Koleva, Elka; Grau, Antoni Maria; Morales-Nin, Beatriz

2018-01-01

In the Balearic Islands, different trammel net designs have been adopted to promote fisheries sustainability and reduce discards. Here, we compare the catch performance of three trammel net designs targeting the spiny lobster Palinurus elephas in terms of biomass, species composition and revenue from commercial catches and discards. Designs differ in the netting fiber type (standard polyfilament, PMF, or a new polyethylene multi-monofilament, MMF) and the use of a guarding net or greca , a mesh piece intended to reduce discards. Catches were surveyed by an on-board observer from 1,550 netting walls corresponding to 70 nets. The number of marketable species captured indicated that the lobster trammel net fishery has multiple targets, which contribute significantly to the total revenue. The discarded species ranged from habitat-forming species to elasmobranches, but the magnitude of gear-habitat interactions on the long term dynamics of benthos remains unclear. No relevant differences in revenue and weight of discards were detected after Bayesian analyses. However, the species composition of discards was different when using greca . Interestingly, high immediate survival was found for discarded undersized lobsters, while a seven day survival assessment, using captive observation, gave an asymptotic estimate of survival probability as 0.64 (95% CI [0.54-0.76]). Therefore, it is recommended that it would be beneficial for this stock if an exemption from the EU landing obligation regulation was sought for undersized lobsters in the Balearic trammel net fishery.

Seismic design and qualification for nuclear power plants

International Nuclear Information System (INIS)

1992-01-01

This safety guide, which supplements the IAEA Code on the Safety of Nuclear Power Plants (NPP); Design (IAEA Safety Series No.50-C-D (Rev.1)), forms part of the Agency's programme, referred to as the NUSS programme, for establishing Codes and Guides relating to land based stationary thermal neutron power plants. The present Guide was originally issued in 1979 as Safety Guide 50-SG-S2 within the series of NUSS guides for the siting of NPP, extending seismic considerations from Safety Guide 50-SG-S1 into the design and verification field. During the revision phase in 1988-1990, this emphasis on design aspects was confirmed and consequently the Guides have been reclassified as a design Guide with the corresponding identification number 50-SG-D15. The general character of the Guide has not been changed an it still relates strongly to 50-SG-S1, which gives guidance on how to determine design basis ground motion for a NPP at a given site

Simulated production rates of exotic nuclei from the ion guide for neutron-induced fission at IGISOL

Energy Technology Data Exchange (ETDEWEB)

Jansson, Kaj; Al-Adili, Ali; Nilsson, Nicklas; Norlin, Martin; Solders, Andreas [Uppsala University, Department of Physics and Astronomy, Uppsala (Sweden)

2017-12-15

An investigation of the stopping efficiency of fission products, in the new ion guide designed for ion production through neutron-induced fission at IGISOL in Jyvaeskylae, Finland, has been conducted. Our simulations take into account the new neutron converter, enabling measurements of neutron-induced fission yields, and thereby provide estimates of the obtained yields as a function of primary proton beam current. Different geometries, targets, and pressures, as well as models for the effective charge of the stopped ions were tested, and optimisations to the setup for higher yields are suggested. The predicted number of ions stopped in the gas lets us estimate the survival probability of the ions reaching the downstream measurements stations. (orig.)

Designing Teaching--Teaching Designing: Teacher's Guidance in a Virtual Design Studio

Science.gov (United States)

Lahti, Henna; Seitamaa-Hakkarainen, Pirita

2014-01-01

This study examined pedagogical aspects of virtual designing. It focused on how an industrial design teacher organised a university course in plastic product design and how the teacher guided student teams' design processes in a virtual design studio. The model of Learning by Collaborative Design was used as a pedagogical and analytical framework.…

Guided Modern Endodontic Surgery: A Novel Approach for Guided Osteotomy and Root Resection.

Science.gov (United States)

Strbac, Georg D; Schnappauf, Albrecht; Giannis, Katharina; Moritz, Andreas; Ulm, Christian

2017-03-01

Continuous improvements in techniques, instruments, and materials have established modern endodontic microsurgery as a state-of-the-art treatment method. The purpose of this approach was to introduce a new surgical endodontic technique by using a three-dimensional printed template for guided osteotomy and root resection. A 38-year-old patient was diagnosed with periapical lesions of teeth #3 and #4 and extruded gutta-percha material. Three-dimensional radiographic and optical scan files were imported into surgical planning software designed for guided implant surgery. Within the adapted software program the periapical lesions and the extruded gutta-percha were visualized and marked. With the aid of virtually positioned surgical pins and piezoelectric instruments, the osteotomy size, the apical resection level, and the bevel angle were defined before treatment. Three-dimensional surgical templates for each tooth were designed within the software program for a guided treatment approach. This approach comprised the treatment of periapical lesions of teeth #3 and #4 with root-end fillings and the detection and complete removal of the extruded gutta-percha material without perforation of sinus membrane. There were no postoperative complications, and clinical and radiologic assessments verified complete healing of the teeth. The guided microsurgical endodontic treatment presented appears to be a viable technique that allows for predefined osteotomies and root resections. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Basic Automotive Mechanics. Florida Vocational Program Guide.

Science.gov (United States)

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This program guide identifies primary concerns in the organization, operation, and evaluation of a basic automotive mechanics program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary of Occupational…

Predictive model for survival in patients with gastric cancer.

Science.gov (United States)

Goshayeshi, Ladan; Hoseini, Benyamin; Yousefli, Zahra; Khooie, Alireza; Etminani, Kobra; Esmaeilzadeh, Abbas; Golabpour, Amin

2017-12-01

Gastric cancer is one of the most prevalent cancers in the world. Characterized by poor prognosis, it is a frequent cause of cancer in Iran. The aim of the study was to design a predictive model of survival time for patients suffering from gastric cancer. This was a historical cohort conducted between 2011 and 2016. Study population were 277 patients suffering from gastric cancer. Data were gathered from the Iranian Cancer Registry and the laboratory of Emam Reza Hospital in Mashhad, Iran. Patients or their relatives underwent interviews where it was needed. Missing values were imputed by data mining techniques. Fifteen factors were analyzed. Survival was addressed as a dependent variable. Then, the predictive model was designed by combining both genetic algorithm and logistic regression. Matlab 2014 software was used to combine them. Of the 277 patients, only survival of 80 patients was available whose data were used for designing the predictive model. Mean ?SD of missing values for each patient was 4.43?.41 combined predictive model achieved 72.57% accuracy. Sex, birth year, age at diagnosis time, age at diagnosis time of patients' family, family history of gastric cancer, and family history of other gastrointestinal cancers were six parameters associated with patient survival. The study revealed that imputing missing values by data mining techniques have a good accuracy. And it also revealed six parameters extracted by genetic algorithm effect on the survival of patients with gastric cancer. Our combined predictive model, with a good accuracy, is appropriate to forecast the survival of patients suffering from Gastric cancer. So, we suggest policy makers and specialists to apply it for prediction of patients' survival.

Regulatory Guide 1.122: Development of floor design response spectra for seismic design of floor-supported equipment or components

International Nuclear Information System (INIS)

Anon.

1993-01-01

''Reactor Site Criteria,'' requires, in part, that safety-related structures, systems, and components remain functional in the event of a Safe Shutdown Earthquake (SSE). It specifies the use of a suitable dynamic analysis as one method of ensuring that the structures, systems, and components can withstand the seismic loads. Similarly, paragraph (a)(2) of Section VI of the same appendix requires, in part, that the structures, systems, and components necessary for continued operation without undue risk to the health and safety of the public remain functional in the event of an Operating Basis Earthquake (OBE). Again, the use of suitable dynamic analysis is specified as one method of ensuring that the structures, systems, and components can withstand the seismic loads. This guide describes methods acceptable to the NRC staff for developing two horizontal and one vertical floor design response spectra at various floors or other equipment-support locations of interest from the time-history motions resulting from the dynamic analysis of the supporting structure. These floor design response spectra are needed for the dynamic analysis of the systems or equipment supported at various locations of the supporting structure

Homebuyer's Guide.

Science.gov (United States)

Sindt, Roger P.; Harris, Jack

Designed to assist prospective buyers in making such important decisions as whether to buy a new or older home and within what price range, the guide provides information on the purchase process. Discussion of the purchase process covers the life-cycle costs (recurring homeownership costs that must be met every month); selection of a home;…

Consistency in color parameters of a commonly used shade guide.

Science.gov (United States)

Tashkandi, Esam

2010-01-01

The use of shade guides to assess the color of natural teeth subjectively remains one of the most common means for dental shade assessment. Any variation in the color parameters of the different shade guides may lead to significant clinical implications. Particularly, since the communication between the clinic and the dental laboratory is based on using the shade guide designation. The purpose of this study was to investigate the consistency of the L∗a∗b∗ color parameters of a sample of a commonly used shade guide. The color parameters of a total of 100 VITAPAN Classical Vacuum shade guide (VITA Zahnfabrik, Bad Säckingen, Germany(were measured using a X-Rite ColorEye 7000A Spectrophotometer (Grand Rapids, Michigan, USA). Each shade guide consists of 16 tabs with different designations. Each shade tab was measured five times and the average values were calculated. The ΔE between the average L∗a∗b∗ value for each shade tab and the average of the 100 shade tabs of the same designation was calculated. Using the Student t-test analysis, no significant differences were found among the measured sample. There is a high consistency level in terms of color parameters of the measured VITAPAN Classical Vacuum shade guide sample tested.

Survival Processing and the Stroop Task

Directory of Open Access Journals (Sweden)

Stephanie A. Kazanas

2015-11-01

Full Text Available This study was designed to investigate the impact of survival processing with a novel task for this paradigm: the Stroop color-naming task. As the literature is mixed with regard to task generalizability, with survival processing promoting better memory for words, but not better memory for faces or paired associates, these types of task investigations are important to a growing field of research. Using the Stroop task provides a unique contribution, as identifying items by color is an important evolutionary adaptation and not specific to humans as is the case with word recall. Our results indicate that survival processing, with its accompanying survival-relevance rating task, remains the best mnemonic strategy for word memory. However, our results also indicate that presenting the survival passage does not motivate better color-naming performance than color-naming alone. In addition, survival processing led to a larger amount of Stroop interference, though not significantly larger than the other conditions. Together, these findings suggest that considering one’s survival when performing memory and attention-based tasks does not enhance cognitive performance generally, although greater allocation of attentional resources to color-incongruent concrete objects could be considered adaptive. These findings support the notion that engaging in deeper processing via survival-relevance ratings may preserve these words across a variety of experimental manipulations.

Solar Energy Installers Curriculum Guides. Book I.

Science.gov (United States)

Walker, Gene C.

This first volume of a comprehensive curriculum guide for the heating-ventilation-air conditioning-refrigeration-solar student is designed to assist high school area vocational centers or community college instructors in the implementation and operation of comfort training programs. Following an introductory section, the guide provides job…

Design of focussing and guide structures for charged particle beams using rare earth cobalt permanent magnets

International Nuclear Information System (INIS)

Halbach, K.

1981-06-01

A number of different methods can be used to describe the magnetic properties of oriented Rare Earth Cobalt (REC) material. It will be shown how these different methods of description lead to different ways to think about, and to execute, the design of magnets that are useful for focusing and guiding charged particle beams. It will also be domonstrated that in some of these magnets, the REC material is used in a somewhat unusual way, requiring magnetics properties of the material that are usually not considered to be of great practical importance

Evaluation of a Modified User Guide for Hearing Aid Management.

Science.gov (United States)

Caposecco, Andrea; Hickson, Louise; Meyer, Carly; Khan, Asaduzzaman

2016-01-01

This study investigated if a hearing aid user guide modified using best practice principles for health literacy resulted in superior ability to perform hearing aid management tasks, compared with the user guide in the original form. This research utilized a two-arm study design to compare the original manufacturer's user guide with a modified user guide for the same hearing aid--an Oticon Acto behind-the-ear aid with an open dome. The modified user guide had a lower reading grade level (4.2 versus 10.5), used a larger font size, included more graphics, and had less technical information. Eighty-nine adults ages 55 years and over were included in the study; none had experience with hearing aid use or management. Participants were randomly assigned either the modified guide (n = 47) or the original guide (n = 42). All participants were administered the Hearing Aid Management test, designed for this study, which assessed their ability to perform seven management tasks (e.g., change battery) with their assigned user guide. The regression analysis indicated that the type of user guide was significantly associated with performance on the Hearing Aid Management test, adjusting for 11 potential covariates. In addition, participants assigned the modified guide required significantly fewer prompts to perform tasks and were significantly more likely to perform four of the seven tasks without the need for prompts. The median time taken by those assigned the modified guide was also significantly shorter for three of the tasks. Other variables associated with performance on the Hearing Aid Management test were health literacy level, finger dexterity, and age. Findings indicate that the need to design hearing aid user guides in line with best practice principles of health literacy as a means of facilitating improved hearing aid management in older adults.

Engineering design guidelines for nuclear criticality safety

International Nuclear Information System (INIS)

Waltz, W.R.

1988-08-01

This document provides general engineering design guidelines specific to nuclear criticality safety for a facility where the potential for a criticality accident exists. The guide is applicable to the design of new SRP/SRL facilities and to major modifications Of existing facilities. The document is intended an: A guide for persons actively engaged in the design process. A resource document for persons charged with design review for adequacy relative to criticality safety. A resource document for facility operating personnel. The guide defines six basic criticality safety design objectives and provides information to assist in accomplishing each objective. The guide in intended to supplement the design requirements relating to criticality safety contained in applicable Department of Energy (DOE) documents. The scope of the guide is limited to engineering design guidelines associated with criticality safety and does not include other areas of the design process, such as: criticality safety analytical methods and modeling, nor requirements for control of the design process

Neural Network Control-Based Drive Design of Servomotor and Its Application to Automatic Guided Vehicle

Directory of Open Access Journals (Sweden)

Ming-Shyan Wang

2015-01-01

Full Text Available An automatic guided vehicle (AGV is extensively used for productions in a flexible manufacture system with high efficiency and high flexibility. A servomotor-based AGV is designed and implemented in this paper. In order to steer the AGV to go along a predefined path with corner or arc, the conventional proportional-integral-derivative (PID control is used in the system. However, it is difficult to tune PID gains at various conditions. As a result, the neural network (NN control is considered to assist the PID control for gain tuning. The experimental results are first provided to verify the correctness of the neural network plus PID control for 400 W-motor control system. Secondly, the AGV includes two sets of the designed motor systems and CAN BUS transmission so that it can move along the straight line and curve paths shown in the taped videos.

Model Commissioning Plan and Guide Specifications

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The objectives of Model Commissioning Plan and Guide Specifications are to ensure that the design team applies commissioning concepts to the design and prepares commissioning specifications and a commission plan for inclusion in the bid construction documents.

Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Sartor, Dale; Tschudi, William

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

Guide to research facilities

Energy Technology Data Exchange (ETDEWEB)

1993-06-01

This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

Survival Processing and the Stroop Task

OpenAIRE

Stephanie A. Kazanas; Kendra M. Van Valkenburg; Jeanette Altarriba

2015-01-01

This study was designed to investigate the impact of survival processing with a novel task for this paradigm: the Stroop color-naming task. As the literature is mixed with regard to task generalizability, with survival processing promoting better memory for words, but not better memory for faces or paired associates, these types of task investigations are important to a growing field of research. Using the Stroop task provides a unique contribution, as identifying items by color is an importa...

46 CFR 108.520 - Type of survival craft.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Type of survival craft. 108.520 Section 108.520 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.520 Type of survival craft. (a) Each lifeboat must be a fire-protected...

Seismic design practice for Indian pressurized heavy water reactors

International Nuclear Information System (INIS)

Chhatre, A.G.; Ingole, S.M.; Bhardwaj, S.A.

1996-01-01

Nuclear power plants designed in India in the last twenty years have been designed for earthquake loading using the current licensing practices. Designers and equipment suppliers have therefore been required to consider seismic loading as a major load case. In India, the nuclear power plants have been seismically qualified using state-of-the-art techniques involving both seismic analysis and testing to ensure that the power plant is capable of safely surviving an earthquake that the plant is likely to experience during their operating life. Guidelines and criteria for meeting the qualification requirements are followed as given in various AERB (Indian Atomic Energy Regulatory Board), NRC, IAEA guides, ASME codes and IEEE standards. In this paper various methods available for qualification of structures, systems, mechanical and electrical equipment are explained. The approach and guidelines used within Indian nuclear industry which are evolved from simple analytical requirements to the more elaborate current requirements involving complex analysis and testing on shake table are also summarized

Comparison and analysis of FDA reported visual outcomes of the three latest platforms for LASIK: wavefront guided Visx iDesign, topography guided WaveLight Allegro Contoura, and topography guided Nidek EC-5000 CATz

Directory of Open Access Journals (Sweden)

Moshirfar M

2017-01-01

Full Text Available Majid Moshirfar,1,2 Tirth J Shah,3 David Franklin Skanchy,4 Steven H Linn,1 Paul Kang,3 Daniel S Durrie5 1HDR Research Center, Hoopes Vision, Salt Lake City, UT, 2Department of Ophthalmology and Visual Sciences, John A Moran Eye Center, University of Utah School of Medicine, Salt Lake City, UT, 3University of Arizona College of Medicine – Phoenix, Phoenix, AZ, 4McGovern Medical School, The University of Texas Health Science Center at Houston, TX, 5Durrie Vision, Kansas City, KS, USA Purpose: To compare and analyze the differences in visual outcomes between Visx iDesign Advanced WaveScan Studio™ System, Alcon Wavelight Allegro Topolyzer and Nidek EC-5000 using Final Fit™ Custom Ablation Treatment Software from the submitted summary of safety and effectiveness of the US Food and Drug Administration (FDA data.Methods: In this retrospective comparative study, 334 eyes from Visx iDesign, 212 eyes from Alcon Contour, and 135 eyes from Nidek CATz platforms were analyzed for primary and secondary visual outcomes. These outcomes were compared via side-by-side graphical and tabular representation of the FDA data. Statistical significance was calculated when appropriate to assess differences. A P-value <0.05 was considered statistically significant. Results: The mean postoperative uncorrected distance visual acuity (UDVA at 12 months was 20/19.25±8.76, 20/16.59±5.94, and 20/19.17±4.46 for Visx iDesign, Alcon Contoura, and Nidek CATz, respectively. In at least 90% of treated eyes at 3 months and 12 months, all three lasers showed either no change or a gain of corrected distance visual acuity (CDVA. Mesopic contrast sensitivity at 6 months showed a clinically significant increase of 41.3%, 25.1%, and 10.6% for eyes using Visx iDesign, Alcon Contoura, and Nidek CATz, respectively. Photopic contrast sensitivity at 6 months showed a clinically significant increase of 19.2%, 31.9%, and 10.6% for eyes using Visx iDesign, Alcon Contoura, and Nidek CATz

Nuclear war survival skills

International Nuclear Information System (INIS)

Kearney, C.H.

1979-09-01

This book includes chapters on psychological preparations, warning and communications, and evacuation. It describes the building of expedient shelters, their ventilation and cooling, the purification and storage of adequate water, the processing and cooking of whole grains and legumes, fallout meters, protection against fires and carbon monoxide, and expedient furnishings for shelters. Other chapters cover sanitation and preventive medicine, medical advice for nuclear survivors lacking the help of doctors, improvised footwear and clothing, and advice on minimum preparations that can be made at low cost and should be made before a crisis arises. One appendix of the handbook gives detailed, field-tested instructions for building six types of earth-covered expedient fallout shelters, with criteria to guide the choice of which shelter to build. Others contain instructions for making an efficient shelter-ventilating pump and a homemade fallout meter that is accurate and dependable with inexpensive materials found in most households. This report is primarily a compilation and summary of civil defense measures and inventions developed at ORNL over the past 14 years and field-tested in six states, from Florida to Utah. It is the first comprehensive handbook of survival information for use by untrained citizens who want to improve their chances of surviving a possible nuclear attack. Sections may be easily excerpted and reproduced for mass distribution through news media

46 CFR 108.550 - Survival craft launching and recovery arrangements: General.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft launching and recovery arrangements...-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.550 Survival craft.... (c) Each survival craft must be arranged to clear each leg, column, footing, brace, mat, and each...

Statistical modelling of survival data with random effects h-likelihood approach

CERN Document Server

Ha, Il Do; Lee, Youngjo

2017-01-01

This book provides a groundbreaking introduction to the likelihood inference for correlated survival data via the hierarchical (or h-) likelihood in order to obtain the (marginal) likelihood and to address the computational difficulties in inferences and extensions. The approach presented in the book overcomes shortcomings in the traditional likelihood-based methods for clustered survival data such as intractable integration. The text includes technical materials such as derivations and proofs in each chapter, as well as recently developed software programs in R (“frailtyHL”), while the real-world data examples together with an R package, “frailtyHL” in CRAN, provide readers with useful hands-on tools. Reviewing new developments since the introduction of the h-likelihood to survival analysis (methods for interval estimation of the individual frailty and for variable selection of the fixed effects in the general class of frailty models) and guiding future directions, the book is of interest to research...

Developing an analytical tool for evaluating EMS system design changes and their impact on cardiac arrest outcomes: combining geographic information systems with register data on survival rates

Directory of Open Access Journals (Sweden)

Sund Björn

2013-02-01

Full Text Available Abstract Background Out-of-hospital cardiac arrest (OHCA is a frequent and acute medical condition that requires immediate care. We estimate survival rates from OHCA in the area of Stockholm, through developing an analytical tool for evaluating Emergency Medical Services (EMS system design changes. The study also is an attempt to validate the proposed model used to generate the outcome measures for the study. Methods and results This was done by combining a geographic information systems (GIS simulation of driving times with register data on survival rates. The emergency resources comprised ambulance alone and ambulance plus fire services. The simulation model predicted a baseline survival rate of 3.9 per cent, and reducing the ambulance response time by one minute increased survival to 4.6 per cent. Adding the fire services as first responders (dual dispatch increased survival to 6.2 per cent from the baseline level. The model predictions were validated using empirical data. Conclusion We have presented an analytical tool that easily can be generalized to other regions or countries. The model can be used to predict outcomes of cardiac arrest prior to investment in EMS design changes that affect the alarm process, e.g. (1 static changes such as trimming the emergency call handling time or (2 dynamic changes such as location of emergency resources or which resources should carry a defibrillator.

Fashion Merchandising Guide.

Science.gov (United States)

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education Services.

Developed to address the needs of the apparel industry, this fashion merchandising curriculum guide is designed to assist marketing educators in effective instructional delivery. Introductory materials include the following: a course blueprint that illustrates units of instruction, core competencies in each unit, and specific objectives for each…

Immediate Implants Placed in Fresh Sockets Associated with Periapical Pathology: A Split-Mouth Design and Survival Evaluation after 1-Year Follow-Up.

Science.gov (United States)

Hita-Iglesias, Cristina; Sánchez-Sánchez, Francisco J; Montero, Javier; Galindo-Moreno, Pablo; Mesa, Francisco; Martínez-Lara, Ildefonso; Sánchez-Fernández, Elena

2016-12-01

To compare the immediate implant success rates between sites with chronic apical lesions and healthy sites in the same patients 1 year postdelayed loading. One hundred sixty-eight immediate implants were placed in sixty patients at upper incisor, canine, and premolar sites. A split-mouth design was used, placing a minimum of two implants, one in a fresh socket associated with chronic periapical disease, the average lesion size was larger than 4 mm and less than 8 mm (test group), and the other(s) in a healthy fresh socket (control group). Implant survival rate at 1 year postloading delayed was compared between the groups. The implant survival rate was 98.2% for the total sample (n = 168); out of the three implants lost, two were from the test group, and one was from the control group (in the same patient as one of the former). Among the surviving implants, five were also considered failures due to excessive bone loss (n = 3) and also because of the recurrence of the periapical lesions (n = 2). Survival rates were significantly lower in the test than control sites at 12 months postloading. Implant survival rates were significantly lower after the immediate implantation in postextraction sockets associated with chronic periapical disease (90.8%) than in healthy postextraction sockets (98.1%). © 2015 Wiley Periodicals, Inc.

A Prospective Randomized Study of Brain Tissue Oxygen Pressure-Guided Management in Moderate and Severe Traumatic Brain Injury Patients

Directory of Open Access Journals (Sweden)

Chien-Min Lin

2015-01-01

Full Text Available The purpose of this study was to compare the effect of PbtO2-guided therapy with traditional intracranial pressure- (ICP- guided treatment on the management of cerebral variables, therapeutic interventions, survival rates, and neurological outcomes of moderate and severe traumatic brain injury (TBI patients. From 2009 to 2010, TBI patients with a Glasgow coma scale 20 mmHg, and 27 patients were treated with ICP-guided therapy (ICP 60 mmHg in the neurosurgical intensive care unit (NICU; demographic characteristics were similar across groups. The survival rate in the PbtO2-guided group was also significantly increased at 3 and 6 months after injury. Moreover, there was a significant correlation between the PbtO2 signal and Glasgow outcome scale-extended in patients from 1 to 6 months after injury. This finding demonstrates that therapy directed by PbtO2 monitoring is valuable for the treatment of patients with moderate and severe TBI and that increasing PaO2 to 150 mmHg may be efficacious for preventing cerebral hypoxic events after brain trauma.

The influence of design characteristics on statistical inference in nonlinear estimation: A simulation study based on survival data and hazard modeling

DEFF Research Database (Denmark)

Andersen, J.S.; Bedaux, J.J.M.; Kooijman, S.A.L.M.

2000-01-01

This paper describes the influence of design characteristics on the statistical inference for an ecotoxicological hazard-based model using simulated survival data. The design characteristics of interest are the number and spacing of observations (counts) in time, the number and spacing of exposure...... concentrations (within c(min) and c(max)), and the initial number of individuals at time 0 in each concentration. A comparison of the coverage probabilities for confidence limits arising from the profile-likelihood approach and the Wald-based approach is carried out. The Wald-based approach is very sensitive...

Rock slope design guide.

Science.gov (United States)

2011-04-01

This Manual is intended to provide guidance for the design of rock cut slopes, rockfall catchment, and : rockfall controls. Recommendations presented in this manual are based on research presented in Shakoor : and Admassu (2010) entitled Rock Slop...

Improved survival in rats with glioma using MRI-guided focused ultrasound and microbubbles to disrupt the blood-brain barrier and deliver Doxil

Science.gov (United States)

Aryal, Muna; Zhi Zhang, Yong; Vykhodtseva, Natalia; Park, Juyoung; Power, Chanikarn; McDannold, Nathan

2012-02-01

Blood-brain-barrier (BBB) limits the transportation of most neuropeptides, proteins (enzymes, antibodies), chemotherapeutic agents, and genes that have therapeutic potential for the treatment of brain diseases. Different methods have been used to overcome this limitation, but they are invasive, non-targeted, or require the development of new drugs. We have developed a method that uses MRI-guided focused ultrasound (FUS) combined with circulating microbubbles to temporarily open BBB in and around brain tumors to deliver chemotherapy agents. Here, we tested whether this noninvasive technique could enhance the effectiveness of a chemotherapy agent (Doxil). Using 690 kHz FUS transducer and microbubble (Definity), we induced BBB disruption in intracranially-implanted 9L glioma tumors in rat's brain in three weekly sessions. Animals who received BBB disruption and Doxil had a median survival time of 34.5 days, which was significantly longer than that found in control animals which is 16, 18.5, 21 days who received no treatment, BBB disruption only and Doxil only respectively This work demonstrates that FUS technique has promise in overcoming barriers to drug delivery, which are particularly stark in the brain due to the BBB.

Legionellosis prevention in building water and HVAC systems a practical guide for design, operation and maintenance to minimize the risk

CERN Document Server

Joppolo, Cesare Maria; Pitera, Luca Alberto; Angermann, Jean Pierre; Izard, Mark

2013-01-01

This Guidebook is a practical guide for design, operation and maintenance to minimize the risk of legionellosis in building water and HVAC systmes. It is devided into several themes such as: Air conditioning of the air (by water – humidification), Production of hot water for washing (fundamentally but not only hot water for washing) and Evaporative cooling tower.

Buckling resistance calculation of Guide Thimbles for the mechanical design of fuel assembly type PWR under normal reactor operating conditions

International Nuclear Information System (INIS)

Cruz, C.B.L.

1990-01-01

The calculations demonstrate the fulfillment of one of the mechanical design criteria for the Fuel Assembly Structure under normal reactor operating conditions. The calculations of stresses in the Guide Thimbles are performed with the aid of the program ANSYS. This paper contains program parameters and modelling of a typical Fuel Assembly for a Reactor similar to ANGRA II. (author)

The World of Business. Teacher's Activity and Resource Guide.

Science.gov (United States)

Columbus Public Schools, OH.

This activity and resource guide is intended to assist teachers in developing course content and effective teaching methods in business education. (General Business for Economic Understanding," 11th edition, is the adopted textbook for this guide.) The guide is organized into twelve major units and is designed so that each unit builds upon the…

Cassandra the definitive guide

CERN Document Server

Hewitt, Eben

2011-01-01

What could you do with data if scalability wasn't a problem? With this hands-on guide, you'll learn how Apache Cassandra handles hundreds of terabytes of data while remaining highly available across multiple data centers -- capabilities that have attracted Facebook, Twitter, and other data-intensive companies. Cassandra: The Definitive Guide provides the technical details and practical examples you need to assess this database management system and put it to work in a production environment. Author Eben Hewitt demonstrates the advantages of Cassandra's nonrelational design, and pays special

Computer-Aided Design/Computer-Assisted Manufacture-Derived Needle Guide for Injection of Botulinum Toxin into the Lateral Pterygoid Muscle in Patients with Oromandibular Dystonia.

Science.gov (United States)

Yoshida, Kazuya

2018-01-01

To evaluate the effectiveness and safety of botulinum toxin administration into the inferior head of the lateral pterygoid muscle of patients with jaw opening dystonia by using a computer-aided design/computer-assisted manufacture (CAD/CAM)-derived needle guide. A total of 17 patients with jaw opening dystonia were enrolled. After the patient's computed tomography (CT) scan was imported and fused with a scan of a plaster cast model of the maxilla, the optimal needle insertion site over the lateral pterygoid muscle was determined using the NobelClinician software. A total of 13 patients were injected both with and without the guide, and 4 patients underwent guided injection alone. The therapeutic effects of botulinum toxin injection and its associated complications were statistically compared between the guided and unguided procedures using paired t test. Botulinum toxin therapy was performed 42 and 32 times with and without the guides, respectively. The needle was easily inserted without any complications in all procedures. There was a significant difference (P < .001) between the mean comprehensive improvements observed with (66.3%) and without (54.4%) the guides. The findings suggest that the use of needle guides during the injection of botulinum toxin into the inferior head of the lateral pterygoid muscle is very useful for aiding the accurate and safe administration of botulinum toxin therapy for jaw opening dystonia.

Using combined system of shaft guides for buckets during shaft deepening

Energy Technology Data Exchange (ETDEWEB)

Durov, E.M.; Ivenskii, N.S.; Alekhin, P.I.

1981-06-01

This paper discusses a system of shaft guides used in the Krasnopol'evsk underground coal mine. The existing skip shaft 514 m deep is deepened to a depth of 700 m. Shaft design is adapted to a system of two pairs of skips, however, only one pair of skips is in operation and the other has been removed. The free space can be used to remove rock material from shaft bottom. It is noted that a system of buckets moving along elastic shaft guides made of rope or along rigid shaft guides can be used. Both solutions have numerous advantages. If rope guides are used time consuming installation of shaft guides is unnecessary in the zone close to the bottom. If rigid guides are used capacity of the bucket can be significantly increased. A system which combines advantages of both solutions is used: in the lower part of the shaft being deepened, buckets are guided by rope, and in the upper zone in which rigid shaft guides have been installed the bucket moves along rigid guides and rope guides simultaneously. Design of the element guiding the bucket is shown in two diagrams. It is noted that using the combined system of shaft guides increases capacity of the hoisting system by 1.5 times.

Contextual analysis of human non-verbal guide behaviors to inform the development of FROG, the Fun Robotic Outdoor Guide

NARCIS (Netherlands)

Karreman, Daphne Eleonora; van Dijk, Elisabeth M.A.G.; Evers, Vanessa

2012-01-01

This paper reports the first step in a series of studies to design the interaction behaviors of an outdoor robotic guide. We describe and report the use case development carried out to identify effective human tour guide behaviors. In this paper we focus on non-verbal communication cues in gaze,

Seismic design considerations for nuclear fuel cycle facilities

International Nuclear Information System (INIS)

Soni, R.S.; Kushwaha, H.S.; Venkat Raj, V.

2001-01-01

During the last few decades, there have been considerable advances in the field of a seismic design of nuclear structures and components housed inside a Nuclear power Plant (NPP). The seismic design and qualification of theses systems and components are carried out through the use of well proven and established theoretical as well as experimental means. Many of the related research works pertaining to these methods are available in the published literature, codes, guides etc. Contrary to this, there is very little information available with regards to the seismic design aspects of the nuclear fuel cycle facilities. This is probably on account of the little importance attached to these facilities from the point of view of seismic loading. In reality, some of these facilities handle a large inventory of radioactive materials and, therefore, these facilities must survive during a seismic event without giving rise to any sort of undue radiological risk to the plant personnel and the public at large. Presented herein in this paper are the seismic design considerations which are adopted for the design of nuclear fuel cycle facilities in India. (author)

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2001-01-01

This publication supports the Safety Requirements on the Safety of Nuclear Power Plants: Design. This Safety Guide was prepared on the basis of a systematic review of all the relevant publications including the Safety Fundamentals, Safety of Nuclear Power Plants: Design, current and ongoing revisions of other Safety Guides, INSAG reports and other publications that have addressed the safety of nuclear power plants. This Safety Guide also provides guidance for Contracting Parties to the Convention on Nuclear Safety in meeting their obligations under Article 14 on Assessment and Verification of Safety. The Safety Requirements publication entitled Safety of Nuclear Power Plants: Design states that a comprehensive safety assessment and an independent verification of the safety assessment shall be carried out before the design is submitted to the regulatory body. This publication provides guidance on how this requirement should be met. This Safety Guide provides recommendations to designers for carrying out a safety assessment during the initial design process and design modifications, as well as to the operating organization in carrying out independent verification of the safety assessment of new nuclear power plants with a new or already existing design. The recommendations for performing a safety assessment are suitable also as guidance for the safety review of an existing plant. The objective of reviewing existing plants against current standards and practices is to determine whether there are any deviations which would have an impact on plant safety. The methods and the recommendations of this Safety Guide can also be used by regulatory bodies for the conduct of the regulatory review and assessment. Although most recommendations of this Safety Guide are general and applicable to all types of nuclear reactors, some specific recommendations and examples apply mostly to water cooled reactors. Terms such as 'safety assessment', 'safety analysis' and 'independent

Rational design and synthesis of an orally bioavailable peptide guided by NMR amide temperature coefficients

Science.gov (United States)

Wang, Conan K.; Northfield, Susan E.; Colless, Barbara; Chaousis, Stephanie; Hamernig, Ingrid; Lohman, Rink-Jan; Nielsen, Daniel S.; Schroeder, Christina I.; Liras, Spiros; Price, David A.; Fairlie, David P.; Craik, David J.

2014-01-01

Enhancing the oral bioavailability of peptide drug leads is a major challenge in drug design. As such, methods to address this challenge are highly sought after by the pharmaceutical industry. Here, we propose a strategy to identify appropriate amides for N-methylation using temperature coefficients measured by NMR to identify exposed amides in cyclic peptides. N-methylation effectively caps these amides, modifying the overall solvation properties of the peptides and making them more membrane permeable. The approach for identifying sites for N-methylation is a rapid alternative to the elucidation of 3D structures of peptide drug leads, which has been a commonly used structure-guided approach in the past. Five leucine-rich peptide scaffolds are reported with selectively designed N-methylated derivatives. In vitro membrane permeability was assessed by parallel artificial membrane permeability assay and Caco-2 assay. The most promising N-methylated peptide was then tested in vivo. Here we report a novel peptide (15), which displayed an oral bioavailability of 33% in a rat model, thus validating the design approach. We show that this approach can also be used to explain the notable increase in oral bioavailability of a somatostatin analog. PMID:25416591

Optical effects on neutron guide tubes produced by collimation

International Nuclear Information System (INIS)

Margaca, F.M.A.; Falcao, A.N.; Sequeira, A.D.; Salgado, J.F.

1991-01-01

The collimation of a neutron beam carried by a guide tube is shown to procedure extensive regions of umbra and penumbra on the inner walls of the guide tube whenever a diaphragm is used at the exit. The region of umbra renders useless a certain length of the guide-tube end while in the region of penumbra the guide exhibits a faint luminosity. These optical effects are particularly important for stringent collimation. It is shown that these effects render impossible the implementation of the 'equal-flight-paths' design currently used for small-angle neutron scattering instruments, which use guide segments and a diaphragm in the collimation assembly. As a consequence, these operate most of the time in strongly unmatched configurations. It is shown that the optimized design formerly proposed by the authors, in which, whenever possible, the full luminous source area is used, not only avoids the optical effects mentioned but also guarantees the highest detector count rate. (orig.)

BRAZILIAN EDUCATION AND SURVIVAL STRATEGIES OF CAPITALISM

Directory of Open Access Journals (Sweden)

Adriana Almeida Sales de Melo

2012-06-01

Full Text Available In discussing the theme Imperialism, Crisis and education, the essay points out aspects of our historical totality in relation to recent crises through which it passed capitalism, and its relationship to changes in Brazilian educational policies. Education remains at the heart of development projects, as a producer of knowledge, as well as guiding the processes of social conformation. They also discussed the aftermath of the crisis: the rise of social inequality and the increase of labor exploitation. Make clear our project of society and education, as resistance movements to the survival of capitalism is a necessity in building movements of counter-hegemony.

General design safety principles for nuclear power plants

International Nuclear Information System (INIS)

1986-01-01

This Safety Guide provides the safety principles and the approach that have been used to implement the Code in the Safety Guides. These safety principles and the approach are tied closely to the safety analyses needed to assist the design process, and are used to verify the adequacy of nuclear power plant designs. This Guide also provides a framework for the use of other design Safety Guides. However, although it explains the principles on which the other Safety Guides are based, the requirements for specific applications of these principles are mostly found in the other Guides

Performance of an elliptically tapered neutron guide

International Nuclear Information System (INIS)

Muehlbauer, Sebastian; Stadlbauer, Martin; Boeni, Peter; Schanzer, Christan; Stahn, Jochen; Filges, Uwe

2006-01-01

Supermirror coated neutron guides are used at all modern neutron sources for transporting neutrons over large distances. In order to reduce the transmission losses due to multiple internal reflection of neutrons, ballistic neutron guides with linear tapering have been proposed and realized. However, these systems suffer from an inhomogeneous illumination of the sample. Moreover, the flux decreases significantly with increasing distance from the exit of the neutron guide. We propose using elliptically tapered guides that provide a more homogeneous phase space at the sample position as well as a focusing at the sample. Moreover, the design of the guide system is simplified because ellipses are simply defined by their long and short axes. In order to prove the concept we have manufactured a doubly focusing guide and investigated its properties with neutrons. The experiments show that the predicted gains using the program package McStas are realized. We discuss several applications of elliptic guides in various fields of neutron physics

Oracle Database 12c backup and recovery survival guide

CERN Document Server

Alvarez, Francisco Munoz

2013-01-01

The book follows a tutorial-based approach, covering all the best practices for backup and recovery. The book starts by introducing readers to the world of backup and recovery, then moves on to teach them the new features offered by Oracle 12c. The book is full of useful tips and best practices that are essential for any DBA to perform backup and recovery operations in an organization.This book is designed for Oracle DBAs and system administrators. The reader will have a basic working experience of administering Oracle databases. This book is designed for Oracle DBAs and system administrators.

Designing an ultrafast laser virtual laboratory using MATLAB GUIDE

Science.gov (United States)

Cambronero-López, F.; Gómez-Varela, A. I.; Bao-Varela, C.

2017-05-01

In this work we present a virtual simulator developed using the MATLAB GUIDE environment based on the numerical resolution of the nonlinear Schrödinger equation (NLS) and using the split step method for the study of the spatial-temporal propagation of nonlinear ultrashort laser pulses. This allows us to study the spatial-temporal propagation of ultrafast pulses as well as the influence of high-order spectral phases such as group delay dispersion and third-order dispersion on pulse compression in time. The NLS can describe several nonlinear effects, in particular in this paper we consider the Kerr effect, cross-polarized wave generation and cubic-quintic propagation in order to highlight the potential of this equation combined with the GUIDE environment. Graphical user interfaces are commonly used in science and engineering teaching due to their educational value, and have proven to be an effective way to engage and motivate students. Specifically, the interactive graphical interfaces presented provide the visualization of some of the most important nonlinear optics phenomena and allows users to vary the values of the main parameters involved.

Study of influence of transport performance of the neutron guide

International Nuclear Information System (INIS)

Li Xinxi; Wang Yan; Huang Chaoqiang; Chen Bo; Chen Liang

2009-01-01

For the sake of improving the performance of the neutron scattering instrument, usually we need use the neutron guide, it's very important to select the right type and optimizing of neutron guide. The papers calculate the focus neutron guide and the single channel neutron guide by numeric method. The results shows that the choice of neutron guide should consult the resolution requirement of neutron scattering instrument, and the length of the neutron guide should be optimized. The calculation results can be the theoretical reference for the design of neutron scattering instrument. (authors)

Transit labor relations guide

Science.gov (United States)

2001-09-01

This report is designed as a guide for those involved in labor relations in the transit industry. It begins with a history of transit labor relations. The economic, political, and legal environment of transit relations is then discussed. A section fo...

Accommodating Oversize and Overweight Loads : Instructor and Student Guide

Science.gov (United States)

2012-08-01

This instructor and student guide is designed to guide the instructor in conveying information at the district level concerning Research Project 0-6404 Accommodating Oversize and Overweight Loads. The specific information focuses on the Bryan D...

The linear shade guide design of Vita 3D-master performs as well as the original design of the Vita 3D-master.

Science.gov (United States)

Corcodel, N; Rammelsberg, P; Jakstat, H; Moldovan, O; Schwarz, S; Hassel, A J

2010-11-01

Visual tooth colour assessment by use of the Vita 3D-Master(®) (3D; Vita Zahnfabrik, Bad Säckingen, Germany) is well documented. To improve handling, a new linear arrangement of the shade tabs has been introduced (LG; Linearguide 3D-Master(®) ). The purpose of this study was to investigate whether the linear design has an effect on shade matching. Fifty-six students underwent identical, theoretical and practical training, by use of an Internet learning module [Toothguide Training Software(®) (TT)] and a standardised training programme [Toothguide Training Box(®) (TTB)]. Each student then matched 30 randomly chosen shade tabs presented in an intra-oral setting by a standardised device [Toothguide Check Box(®) (TCB)]; 15 matches were made using the 3D and 15 using the LG shade guide system, under a daylight lamp (840 matches for each guide). It was recorded to what extent the presented and selected shade tabs, or the lightness group of the tabs, matched, also the needed time for colour matching. The results showed that 35% of perfect matches were observed for the 3D and 32% for the LG. The lightness group was correct in 59% of cases for 3D and 56% for LG. Mean time needed for matching of tabs and lightness group was no different between groups (no significant difference for any assessment). Within the limitations of the study design, the colour assessment with regard to performance and time needed in shade matching was not different with the LG or the 3D. Therefore, the user should choose which shade tab arrangement is more applicable. © 2010 Blackwell Publishing Ltd.

Changes in the design, fabrication and setting of guide tube support pins in alloy X750

International Nuclear Information System (INIS)

Benhamou, C.; Chambrin, J.L.; Todeschini, P.; Champredonde, J.; Lemaire, E.

2004-01-01

As a consequence of a problem of stress corrosion cracking (SCC) encountered on guide tube support pins (GTSP) of first generation (1982) and of second generation (1987), EDF and Framatome decided in mars 1988 to launch an important program involving a complete overhaul of the design, the material used, the fabrication and the setting in reactor of GTSP. This program has led to the implementation in 900 MWe and 1300 MWe PWR of a new tube guide support pin called NG89. This implementation began in 1989, now 15 years later, 40% of the operating GTSP in 900 MWe and 1300 MWe PWR are of NG89 type, the oldest ones cumulate 105000 hours in service without negative feedback experience. The main features of the NG89 is: - to be made from an alloy X-750 containing boron (from 25 to 45 ppm) - to have a SCC threshold set at 720 MPa - to be machined from metal bars completely treated, - to have a rolling of the fillets, and - to undergo a shot blasting on the zones of the surface the most acted upon. (A.C.)

Guide to Closing and Conditioning Ventilated Crawlspaces

Energy Technology Data Exchange (ETDEWEB)

Dickson, Bruce [IBACOS, Inc., Pittsburgh, PA (United States)

2013-01-01

This how-to guide explains the issues and concerns with conventional ventilated crawlspaces and provides prescriptive measures for improvements that will create healthier and more durable spaces. The methods described in this guide are not the only acceptable ways to treat a crawlspace but represent a proven strategy that works in many areas of the United States. The designs discussed in this guide may or may not meet the local building codes and as such will need to be researched before beginning the project.

A Revised Guide for Improving Teacher Education in Human Rights.

Science.gov (United States)

Phi Delta Kappa, Bloomington, IN. Commission of Education, Human Rights, and Responsibilities.

This document serves as a guide for teacher education institutions and programs designed to prepare educators for meeting their responsibilities in the area of human rights and human relations. This second edition of the guide represents a substantial modification of the original guide, and includes many activities, experiences, and suggestions…

Introduction to SURPH.1 analysis of release-recapture data for survival studies

International Nuclear Information System (INIS)

Smith, S.G.; Skalski, J.R.; Schlechte, J.W.; Hoffmann, A.; Cassen, V.

1994-12-01

Program SURPH is the culmination of several years of research to develop a comprehensive computer program to analyze survival studies of fish and wildlife populations. Development of this software was motivated by the advent of the PIT-tag (Passive Integrated Transponder) technology that permits the detection of salmonid smolt as they pass through hydroelectric facilities on the Snake and Columbia Rivers in the Pacific Northwest. Repeated detections of individually tagged smolt and analysis of their capture-histories permits estimates of downriver survival probabilities. Eventual installation of detection facilities at adult fish ladders will also permit estimation of ocean survival and upstream survival of returning salmon using the statistical methods incorporated in SURPH.1. However, the utility of SURPH.1 far exceeds solely the analysis of salmonid tagging studies. Release-recapture and radiotelemetry studies from a wide range of terrestrial and aquatic species have been analyzed using SURPH.1 to estimate discrete time survival probabilities and investigate survival relationships. The interactive computing environment of SURPH.1 was specifically developed to allow researchers to investigate the relationship between survival and capture processes and environmental, experimental and individual-based covariates. Program SURPH.1 represents a significant advancement in the ability of ecologists to investigate the interplay between morphologic, genetic, environmental and anthropogenic factors on the survival of wild species. It is hoped that this better understanding of risk factors affecting survival will lead to greater appreciation of the intricacies of nature and to improvements in the management of wild resources. This technical report is an introduction to SURPH.1 and provides a user guide for both the UNIX and MS-Windows reg-sign applications of the SURPH software

Introduction to Artificial Vision through Laboratory Guides Using Matlab

Directory of Open Access Journals (Sweden)

Verónica Londoño-Osorio

2013-11-01

Full Text Available This paper presents the design of two laboratory guides in artificial vision for a course which aims to introduce students to the different areas of specialization of his career. Therefore, the designed practices motivate and provide relevant content to the student, and to encourage research in the area of image processing. The first guide presents an introductory practice that explores the basic commands for image processing by programming a GUI in Matlab, and a second practice in which you use an image recognition algorithm, which compares the color characteristics of facial or objects images. The discussion of the results, challenges and recommendations for the development of each practice session are explained. The survey answers of the students are displayed. This survey allows checking their level of acceptance for the design and content of practice and motivation to continue studying in the image processing area. Finally, comparisons with laboratory guides that were designed in other universities are made.

Self-benchmarking Guide for Laboratory Buildings: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Greenberg, Steve; Sartor, Dale

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

An overview of equipment survivability studies at Sandia National Laboratories (SNL)

International Nuclear Information System (INIS)

Bonzon, L.L.; Craft, Ch.M.; McCulloch, W.H.; Sebrell, W.A.

1983-01-01

The USNRC sponsors a number of programs at Sandia National Laboratories (SNL) specifically addressing safety-related equipment survivability. The major thrust of these programs has been the physical testing of equipment. Test results illustrate the importance of a dedicated equipment design effort giving particular attention to the safety implications of the equipment operation. Several equipment survivability tests here have revealed equipment design and test-related deficiencies

Clinicopathologic Features and Survival of Breast Cancer Subtypes in Northeast Iran

Directory of Open Access Journals (Sweden)

Soodabeh Shahidsales

2018-01-01

Full Text Available Background: Breast cancer can be categorized into different histopathological subtypes based on gene expression profiles. This study aims to evaluate the clinicopathological features and overall survival of various subtypes of breast cancer to assist diagnosis and guide treatment. Methods: The clinicopathologic features of 1095 patients with breast cancer diagnosed over a 10–year period between 2001 and 2011 were analyzed. The Kaplan–Meier method was used to analyze disease-free survival and overall survival. Calculation of the hazard ratio was conducted by multivariate Cox regression. Results: According to the clinicopathologic characteristics of 1095 cases, there were 42% luminal A subtype, 19.2% luminal B, 23% triple negative, and 15% HER2+. The lowest (46.88±12.59 years and highest (50.54±12.32 years mean ages were in the triple negative and HER2+ groups, respectively. There was a significant correlation between histology subtype and age, BMI, lymph node, type of surgery, and stage of disease. There was significantly shorter overall survival and disease free survival in HER2+ breast cancer patients (P<0.001. Multivariate analysis showed that age had the highest hazard ratio of 2.481 (95% Confidence Interval: 1.375-4.477. Conclusion: The results of this study showed the importance of clinicopathological studies of molecular types which help early diagnosis and identification of the best strategy to treat breast cancer.

A new catheter design for combined radiofrequency ablation and optoacoustic treatment monitoring using copper-coated light-guides

Science.gov (United States)

Rebling, Johannes; Oyaga Landa, Francisco Javier; Deán-Ben, Xosé Luis; Razansky, Daniel

2018-02-01

Electrosurgery, i.e. the application of radiofrequency current for tissue ablation, is a frequently used treatment for many cardiac arrhythmias. Electrophysiological and anatomic mapping, as well as careful radiofrequency power control typically guide the radiofrequency ablation procedure. Despite its widespread application, accurate monitoring of the lesion formation with sufficient spatio-temporal resolution remains challenging with the existing imaging techniques. We present a novel integrated catheter for simultaneous radiofrequency ablation and optoacoustic monitoring of the lesion formation in real time and 3D. The design combines the delivery of both electric current and optoacoustic excitation beam in a single catheter consisting of copper-coated multimode light-guides and its manufacturing is described in detail. The electrical current causes coagulation and desiccation while the excitation light is locally absorbed, generating OA responses from the entire treated volume. The combined ablation-monitoring capabilities were verified using ex-vivo bovine tissue. The formed ablation lesions showed a homogenous coagulation while the ablation was monitored in realtime with a volumetric frame rate of 10 Hz over 150 seconds.

Solar Powering Your Community: A Guide for Local Governments; Second Edition

Energy Technology Data Exchange (ETDEWEB)

2011-01-01

DOE designed this guide "Solar Powering Your Community: A Guide for Local Governments" to assist local government officials and stakeholders in designing and implementing strategic local solar plans. The 2011 edition contains the most recent lessons and successes from the 25 Solar America Cities and other communities promoting solar energy. Because DOE recognizes that there is no one path to solar market development, this guide introduces a range of policy and program options that can help a community build a local solar infrastructure.

Pace-capture-guided ablation after contact-force-guided pulmonary vein isolation: results of the randomized controlled DRAGON trial.

Science.gov (United States)

Masuda, Masaharu; Fujita, Masashi; Iida, Osamu; Okamoto, Shin; Ishihara, Takayuki; Nanto, Kiyonori; Kanda, Takashi; Sunaga, Akihiro; Tsujimura, Takuya; Matsuda, Yasuhiro; Ohashi, Takuya; Uematsu, Masaaki

2017-11-17

Before the discovery of contact-force guidance, eliminating pacing capture along the pulmonary vein (PV) isolation line had been reported to improve PV isolation durability and rhythm outcomes. DRAGON (UMIN-CTR, UMIN000015332) aimed to elucidate the efficacy of pace-capture-guided ablation following contact-force-guided PV isolation ablation in paroxysmal atrial fibrillation (AF) patients. A total of 156 paroxysmal AF patients with AF-trigger ectopies from any of the four PVs induced by isoproterenol were randomly assigned to undergo pace-capture-guided ablation along a contact-force-guided isolation line around AF-trigger PVs (PC group, n = 76) or contact-force-guided PV isolation ablation alone (control group, n = 80). Follow-up of at least 1 year commenced with serial 24 h Holter and symptom-triggered ambulatory monitoring. There was no significant difference in acute PV reconnection rates during a 20 min waiting period after the last ablation or adenosine infusion testing between the PC and the control groups (per patient, 21% vs. 27%, P = 0.27; per AF-trigger PV, 5.9% vs. 7.3%, P = 0.70; and per non-AF-trigger PV, 7.1% vs. 7.4%, P = 0.92). Atrial tachyarrhythmia-free survival rates off antiarrhythmic drugs after the initial session were comparable at 19.3 ± 6.2 months between the two groups (82% vs. 80%, P = 0.80). Among 22 patients who required a second ablation procedure, there was no difference between the PC and the control groups in the PV reconnection rates at both previously AF-trigger (29% vs. 43%, P = 0.70) and non-AF-trigger PVs (18% vs. 19%, P = 0.88). Pace-capture-guided ablation performed after contact-force-guided PV isolation demonstrated no improvement in PV isolation durability or rhythm outcome. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2017. For permissions, please email: journals.permissions@oup.com.

International nuclear energy guide

International Nuclear Information System (INIS)

Anon.

1983-01-01

Separate abstracts are included for each of the papers presented concerning current technical and economical events in the nuclear field. Twelve papers have been abstracted and input to the data base. The ''international nuclear energy guide'' gives a general directory of the name, the address and the telephone number of the companies and bodies quoted in this guide; a chronology of the main events 1982. The administrative and professional organization, the nuclear courses and research centers in France are presented, as also the organization of protection and safety, and of nuclear fuel cycle. The firms concerned by the design and the construction of NSSS and the allied nuclear firms are also presented. The last part of this guide deals with the nuclear energy in the world: descriptive list of international organizations, and, the nuclear activities throughout the world (alphabetical order by countries) [fr

Lymphatic endothelial S1P promotes mitochondrial function and survival in naive T cells.

Science.gov (United States)

Mendoza, Alejandra; Fang, Victoria; Chen, Cynthia; Serasinghe, Madhavika; Verma, Akanksha; Muller, James; Chaluvadi, V Sai; Dustin, Michael L; Hla, Timothy; Elemento, Olivier; Chipuk, Jerry E; Schwab, Susan R

2017-06-01

Effective adaptive immune responses require a large repertoire of naive T cells that migrate throughout the body, rapidly identifying almost any foreign peptide. Because the production of T cells declines with age, naive T cells must be long-lived. However, it remains unclear how naive T cells survive for years while constantly travelling. The chemoattractant sphingosine 1-phosphate (S1P) guides T cell circulation among secondary lymphoid organs, including spleen, lymph nodes and Peyer's patches, where T cells search for antigens. The concentration of S1P is higher in circulatory fluids than in lymphoid organs, and the S1P 1 receptor (S1P 1 R) directs the exit of T cells from the spleen into blood, and from lymph nodes and Peyer's patches into lymph. Here we show that S1P is essential not only for the circulation of naive T cells, but also for their survival. Using transgenic mouse models, we demonstrate that lymphatic endothelial cells support the survival of T cells by secreting S1P via the transporter SPNS2, that this S1P signals through S1P 1 R on T cells, and that the requirement for S1P 1 R is independent of the established role of the receptor in guiding exit from lymph nodes. S1P signalling maintains the mitochondrial content of naive T cells, providing cells with the energy to continue their constant migration. The S1P signalling pathway is being targeted therapeutically to inhibit autoreactive T cell trafficking, and these findings suggest that it may be possible simultaneously to target autoreactive or malignant cell survival.

CT-guided Bipolar and Multipolar Radiofrequency Ablation (RF Ablation) of Renal Cell Carcinoma: Specific Technical Aspects and Clinical Results

Energy Technology Data Exchange (ETDEWEB)

Sommer, C. M., E-mail: christof.sommer@med.uni-heidelberg.de [University Hospital Heidelberg, INF 110, Department of Diagnostic and Interventional Radiology (Germany); Lemm, G.; Hohenstein, E. [Minimally Invasive Therapies and Nuclear Medicine, SLK Kliniken Heilbronn GmbH, Clinic for Radiology (Germany); Bellemann, N.; Stampfl, U. [University Hospital Heidelberg, INF 110, Department of Diagnostic and Interventional Radiology (Germany); Goezen, A. S.; Rassweiler, J. [Clinic for Urology, SLK Kliniken Heilbronn GmbH (Germany); Kauczor, H. U.; Radeleff, B. A. [University Hospital Heidelberg, INF 110, Department of Diagnostic and Interventional Radiology (Germany); Pereira, P. L. [Minimally Invasive Therapies and Nuclear Medicine, SLK Kliniken Heilbronn GmbH, Clinic for Radiology (Germany)

2013-06-15

Purpose. This study was designed to evaluate the clinical efficacy of CT-guided bipolar and multipolar radiofrequency ablation (RF ablation) of renal cell carcinoma (RCC) and to analyze specific technical aspects between both technologies. Methods. We included 22 consecutive patients (3 women; age 74.2 {+-} 8.6 years) after 28 CT-guided bipolar or multipolar RF ablations of 28 RCCs (diameter 2.5 {+-} 0.8 cm). Procedures were performed with a commercially available RF system (Celon AG Olympus, Berlin, Germany). Technical aspects of RF ablation procedures (ablation mode [bipolar or multipolar], number of applicators and ablation cycles, overall ablation time and deployed energy, and technical success rate) were analyzed. Clinical results (local recurrence-free survival and local tumor control rate, renal function [glomerular filtration rate (GFR)]) and complication rates were evaluated. Results. Bipolar RF ablation was performed in 12 procedures and multipolar RF ablation in 16 procedures (2 applicators in 14 procedures and 3 applicators in 2 procedures). One ablation cycle was performed in 15 procedures and two ablation cycles in 13 procedures. Overall ablation time and deployed energy were 35.0 {+-} 13.6 min and 43.7 {+-} 17.9 kJ. Technical success rate was 100 %. Major and minor complication rates were 4 and 14 %. At an imaging follow-up of 15.2 {+-} 8.8 months, local recurrence-free survival was 14.4 {+-} 8.8 months and local tumor control rate was 93 %. GFR did not deteriorate after RF ablation (50.8 {+-} 16.6 ml/min/1.73 m{sup 2} before RF ablation vs. 47.2 {+-} 11.9 ml/min/1.73 m{sup 2} after RF ablation; not significant). Conclusions. CT-guided bipolar and multipolar RF ablation of RCC has a high rate of clinical success and low complication rates. At short-term follow-up, clinical efficacy is high without deterioration of the renal function.

Adobe Edge Quickstart Guide

CERN Document Server

Labrecque, Joseph

2012-01-01

Adobe Edge Quickstart Guide is a practical guide on creating engaging content for the Web with Adobe's newest HTML5 tool. By taking a chapter-by-chapter look at each major aspect of Adobe Edge, the book lets you digest the available features in small, easily understandable chunks, allowing you to start using Adobe Edge for your web design needs immediately. If you are interested in creating engaging motion and interactive compositions using web standards with professional tooling, then this book is for you. Those with a background in Flash Professional wanting to get started quickly with Adobe

Expanding Library Services and Instruction Through LibGuides.

Science.gov (United States)

Ream, Tim; Parker-Kelly, Darlene

2016-01-01

Beginning in 2012, the Charles R. Drew University (CDU) Health Sciences Library used LibGuides in a number of innovative ways. Librarians constructed e-book databases, in-depth tutorials on technology-related topics, and web pages highlighting special events. To assess similar LibGuides innovation, CDU librarians developed an eight-question survey distributed to health sciences and hospital libraries throughout Southern California and Arizona. Results showed that libraries used LibGuides primarily to deliver access to online resources and to provide supplementary materials supporting instruction. Responses also revealed that many libraries had not yet adopted LibGuides. These findings were analyzed and compared to past and current LibGuides design at CDU.

Design of the reactor coolant system and associated systems in nuclear power plants. Safety guide (Spanish Edition); Diseno del sistema de refrigeracion del reactor y los sistemas asociados en las centrales nucleares. Guia de seguridad

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-15

This Safety Guide was prepared under the IAEA programme for establishing safety standards for nuclear power plants. The basic requirements for the design of safety systems for nuclear power plants are established in the Safety Requirements publication, Safety Standards Series No. NS-R-1 on Safety of Nuclear Power Plants: Design, which it supplements. This Safety Guide describes how the requirements for the design of the reactor coolant system (RCS) and associated systems in nuclear power plants should be met. This publication is a revision and combination of two previous Safety Guides, Safety Series No. 50-SG-D6 on Ultimate Heat Sink and Directly Associated Heat Transport Systems for Nuclear Power Plants (1982), and Safety Series No. 50-SG-D13 on Reactor Coolant and Associated Systems in Nuclear Power Plants (1987), which are superseded by this new Safety Guide. The revision takes account of developments in the design of the RCS and associated systems in nuclear power plants since the earlier Safety Guides were published in 1982 and 1987, respectively. The other objectives of the revision are to ensure consistency with Ref., issued in 2004, and to update the technical content. In addition, an appendix on pressurized heavy water reactors (PHWRs) has been included.

Latin Curriculum Guide.

Science.gov (United States)

North Carolina State Dept. of Public Instruction, Raleigh. Instructional Services.

North Carolina's Latin curriculum guide describes the overarching concepts for Latin study, particularly at the secondary level, and outlines what students should know and be able to do at the beginning, intermediate, and advanced levels. It is designed to provide directions to school districts as they plan and/or continue to improve their Latin…

A Policymaker's Guide to Feed-in Tariff Policy Design

Energy Technology Data Exchange (ETDEWEB)

Couture, Toby D. [E3 Analytics, Berlin (Germany); Cory, Karlynn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kreycik, Claire [National Renewable Energy Lab. (NREL), Golden, CO (United States); Williams, Emily [U.S. Dept. of Energy, Washington, DC (United States)

2010-07-01

Feed-in tariffs (FITs) are the most widely used renewable energy policy in the world for driving accelerating renewable energy (RE) deployment, accounting for a greater share of RE development than either tax incentives or renewable portfolio standard (RPS) policies. FITs have generated significant RE deployment, helping bring the countries that have implemented them successfully to the forefront of the global RE industry. In the European Union (EU), FIT policies have led to the deployment of more than 15,000 MW of solar photovoltaic (PV) power and more than 55,000 MW of wind power between 2000 and the end of 2009. In total, FITs are responsible for approximately 75% of global PV and 45% of global wind deployment. Countries such as Germany, in particular, have demonstrated that FITs can be used as a powerful policy tool to drive RE deployment and help meet combined energy security and emissions reductions objectives. This policymaker’s guide provides a detailed analysis of FIT policy design and implementation and identifies a set of best practices that have been effective at quickly stimulating the deployment of large amounts of RE generation.

Unified Facilities Criteria (UFC) Design Guide. Army Reserve Facilities

Science.gov (United States)

2010-02-01

horticulturally appropriate to the site specific location in which they are planted. Consideration should be given to adjacent structures and improvements...impact FPI Federal Prison Industries FPM Feet per minute GFCI Government-furnished/contractor-installed or Ground-Fault Circuit Interrupter GFGI...Uniform Federal Accessibility Standards UFGs Unified Facility Guide Specifications UFGs Rst UFGS - Reserve Support Team UnICoR Federal Prison Industry

The ActionScript 30 Quick Reference Guide

CERN Document Server

Stiller, David; deHaan, Jen; Richardson, Darren

2008-01-01

"No matter what your background, the pages that follow will provide you with some excellent knowledge, insight, and even a little bit of wisdom in the realm of Flash and ActionScript. Happy learning!"-- Branden Hall, from the ForewordWritten by Flash insiders with extensive knowledge of the technology, this guide is designed specifically to help Flash designers and developers make the leap from ActionScript 2.0 to the new object-oriented ActionScript 3.0 quickly and painlessly. Formatted so you can find any topic easily, ActionScript 3.0 Quick Reference Guide explains:Object-oriented programmi

Blogging business step-by-step startup guide

CERN Document Server

magazine, Entrepreneur

2014-01-01

This kit includes: Essential industry and business-specific startup steps with worksheets, calculators, checklists and more. Entrepreneur Editors' Start Your Own Business, a guide to starting any business and surviving the first three years. Downloadable, customizable business letters, sales letters, and other sample documents. Entrepreneur's Small Business Legal Toolkit. Blogs are still one of the internet's fastest-growing phenomena–and one of the best and easiest ways to make money online. Packed with the latest blog tools, tricks, and up-and-coming trends, this fully revised edition teache

Field guide to the forest trees of Ghana

OpenAIRE

Hawthorne, William

1990-01-01

This guide has been produced to help foresters identify trees in Ghanaian rain forest. The range and definition of forest types covered are the same as those described by Hall and Swaine (1981). Although the guide is designed primarily for use by Technical Officers in the Forestry Department, it is hoped that other interested parties will find it useful as well: technical jargon has been kept to a minimum and the leaves of most species are illustrated. It is designed to be used in conjunction...

Development, Use and Maintenance of the Design Basis Threat. Implementing Guide (French Edition); Elaboration, utilisation et actualisation de la menace de reference. Guide d'application

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-08-15

This publication provides guidance on how to develop, use and maintain a design basis threat (DBT). It is intended for decision makers from organizations with roles and responsibilities for the development, use and maintenance of the DBT. This implementing guide describes a DBT; identifies and recommends the roles and responsibilities of organizations that should be involved in the development, use and maintenance of a DBT; describes how to conduct a national threat assessment as a precursor to a DBT; explains how a DBT can be developed; explains how a DBT is incorporated into a State's nuclear security regime; and explains the conditions for a review of the DBT, and how the review and update are conducted.

Criticality safety basics, a study guide

Energy Technology Data Exchange (ETDEWEB)

V. L. Putman

1999-09-01

This document is a self-study and classroom guide, for criticality safety of activities with fissile materials outside nuclear reactors. This guide provides a basic overview of criticality safety and criticality accident prevention methods divided into three parts: theory, application, and history. Except for topic emphasis, theory and history information is general, while application information is specific to the Idaho National Engineering and Environmental Laboratory (INEEL). Information presented here should be useful to personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. However, the guide's primary target audience is fissile material handler candidates.

Criticality safety basics, a study guide

International Nuclear Information System (INIS)

Putman, V.L.

1999-01-01

This document is a self-study and classroom guide, for criticality safety of activities with fissile materials outside nuclear reactors. This guide provides a basic overview of criticality safety and criticality accident prevention methods divided into three parts: theory, application, and history. Except for topic emphasis, theory and history information is general, while application information is specific to the Idaho National Engineering and Environmental Laboratory (INEEL). Information presented here should be useful to personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. However, the guide's primary target audience is fissile material handler candidates

Designing an ultrafast laser virtual laboratory using MATLAB GUIDE

International Nuclear Information System (INIS)

Cambronero-López, F; Gómez-Varela, A I; Bao-Varela, C

2017-01-01

In this work we present a virtual simulator developed using the MATLAB GUIDE environment based on the numerical resolution of the nonlinear Schrödinger equation (NLS) and using the split step method for the study of the spatial–temporal propagation of nonlinear ultrashort laser pulses. This allows us to study the spatial–temporal propagation of ultrafast pulses as well as the influence of high-order spectral phases such as group delay dispersion and third-order dispersion on pulse compression in time. The NLS can describe several nonlinear effects, in particular in this paper we consider the Kerr effect, cross-polarized wave generation and cubic–quintic propagation in order to highlight the potential of this equation combined with the GUIDE environment. Graphical user interfaces are commonly used in science and engineering teaching due to their educational value, and have proven to be an effective way to engage and motivate students. Specifically, the interactive graphical interfaces presented provide the visualization of some of the most important nonlinear optics phenomena and allows users to vary the values of the main parameters involved. (paper)

Interpreter's Guide to Blackbird Marsh Nature Trail.

Science.gov (United States)

Environmental Studies Center, Pensacola, FL.

This booklet was prepared to help the user interpret the natural history of Blackbird Marsh Nature Trail in Escambia County, Florida, and serves as a guide to the animal and plant life. The publication is part of a series of illustrated guides designed for use by teachers and students of all levels in conjunction with field trips to the 1200-acre…

MRI-guided vacuum-assisted breast biopsy: comparison with stereotactically guided and ultrasound-guided techniques

Energy Technology Data Exchange (ETDEWEB)

Imschweiler, Thomas; Freiwald, Bianka; Kubik-Huch, Rahel A. [Kantonspital Baden AG, Institute for Radiology, Baden (Switzerland); Haueisen, Harald [Kantonspital Aarau AG, Institute for Radiology, Aarau (Switzerland); Kampmann, Gert [Clinica Sant' Anna, Lugano, Sorengo (Switzerland); Rageth, Luzi [Adjumed Services AG, Zurich (Switzerland); Seifert, Burkhardt [Institute for Social and Preventive Medicine, University of Zurich, Division of Biostatistics, Zuerich (Switzerland); Rageth, Christoph [Breast Centre, Zurich (Switzerland)

2014-01-15

To analyse the development of MRI-guided vacuum-assisted biopsy (VAB) in Switzerland and to compare the procedure with stereotactically guided and ultrasound-guided VAB. We performed a retrospective analysis of VABs between 2009 and 2011. A total of 9,113 VABs were performed. Of these, 557 were MRI guided. MRI-guided VAB showed the highest growth rate (97 %) of all three procedures. The technical success rates for MRI-guided, stereotactically guided and ultrasound-guided VAB were 98.4 % (548/557), 99.1 % (5,904/5,960) and 99.6 % (2,585/2,596), respectively. There were no significant differences (P = 0.12) between the MRI-guided and the stereotactically guided procedures. The technical success rate for ultrasound-guided VAB was significantly higher than that for MRI-guided VAB (P < 0.001). There were no complications using MRI-guided VAB requiring open surgery. The malignancy diagnosis rate for MRI-guided VAB was similar to that for stereotactically guided VAB (P = 0.35). MRI-guided VAB is a safe and accurate procedure that provides insight into clinical breast findings. (orig.)

A Guide to Curriculum Planning in Global Studies.

Science.gov (United States)

Hartoonian, H. Michael; Stock, Hilary

This guide is designed to assist educators develop curricula to embrace global perspectives. The guide is organized into five sections. The first section provides an overview of global studies, and seeks to answer such questions as "Why study global studies?" and "What does global studies include?" The second section identifys…

Marketing and Distributive Education. Food Marketing Curriculum Guide

Science.gov (United States)

Northern Illinois Univ., DeKalb. Dept. of Business Education and Administration Services.

This document is one of four curriculum guides designed to provide the curriculum coordinator with a basis for planning a comprehensive program in the field of marketing as well as to provide marketing and distributive education teachers with maximum flexibility. Introductory information provides directions for using the guide and information on…

Vaadin 7 UI design by example beginner's guide

CERN Document Server

Duarte, Alejandro

2013-01-01

This book is a hands-on Beginner's Guide for developers who are new to Vaadin and/or Vaadin UI components. The book will teach readers through examples to use each of the exciting components to build and add various aspects of the user interface to their web apps.If you have experience with the Java language and want to create web applications that look good without having to deal with HTML, XML, and JavaScript, this book is for you. Basic Java programming skills are required, but no web development knowledge is needed at all.

Downstream fish passage guide walls: A hydraulic scale model analysis

Science.gov (United States)

Mulligan, Kevin; Towler, Brett; Haro, Alexander J.; Ahlfeld, David P.

2018-01-01

Partial-depth guide walls are used to improve passage efficiency and reduce the delay of out-migrating anadromous fish species by guiding fish to a bypass route (i.e. weir, pipe, sluice gate) that circumvents the turbine intakes, where survival is usually lower. Evaluation and monitoring studies, however, indicate a high propensity for some fish to pass underneath, rather than along, the guide walls, compromising their effectiveness. In the present study we evaluated a range of guide wall structures to identify where/if the flow field shifts from sweeping (i.e. flow direction primarily along the wall and towards the bypass) to downward-dominant. Many migratory fish species, particularly juveniles, are known to drift with the flow and/or exhibit rheotactic behaviour during their migration. When these behaviours are present, fish follow the path of the flow field. Hence, maintaining a strong sweeping velocity in relation to the downward velocity along a guide wall is essential to successful fish guidance. Nine experiments were conducted to measure the three-dimensional velocity components upstream of a scale model guide wall set at a wide range of depths and angles to flow. Results demonstrated how each guide wall configuration affected the three-dimensional velocity components, and hence the downward and sweeping velocity, along the full length of the guide wall. In general, the velocities produced in the scale model were sweeping dominant near the water surface and either downward dominant or close to the transitional depth near the bottom of the guide wall. The primary exception to this shift from sweeping do downward flow was for the minimum guide wall angle tested in this study (15°). At 15° the flow pattern was fully sweeping dominant for every cross-section, indicating that a guide wall with a relatively small angle may be more likely to produce conditions favorable to efficient guidance. A critical next step is to evaluate the behaviour of migratory fish as

Masters Thesis- Criticality Alarm System Design Guide with Accompanying Alarm System Development for the Radioisotope Production Laboratory in Richland, Washington

Energy Technology Data Exchange (ETDEWEB)

Greenfield, Bryce A. [Univ. of New Mexico, Albuquerque, NM (United States)

2009-12-01

A detailed instructional manual was created to guide criticality safety engineers through the process of designing a criticality alarm system (CAS) for Department of Energy (DOE) hazard class 1 and 2 facilities. Regulatory and technical requirements were both addressed. A list of design tasks and technical subtasks are thoroughly analyzed to provide concise direction for how to complete the analysis. An example of the application of the design methodology, the Criticality Alarm System developed for the Radioisotope Production Laboratory (RPL) of Richland, Washington is also included. The analysis for RPL utilizes the Monte Carlo code MCNP5 for establishing detector coverage in the facility. Significant improvements to the existing CAS were made that increase the reliability, transparency, and coverage of the system.

Canadian Optically-guided approach for Oral Lesions Surgical (COOLS) trial: study protocol for a randomized controlled trial

International Nuclear Information System (INIS)

Poh, Catherine F; Durham, J Scott; Brasher, Penelope M; Anderson, Donald W; Berean, Kenneth W; MacAulay, Calum E; Lee, J Jack; Rosin, Miriam P

2011-01-01

Oral cancer is a major health problem worldwide. The 5-year survival rate ranges from 30-60%, and has remained unchanged in the past few decades. This is mainly due to late diagnosis and high recurrence of the disease. Of the patients who receive treatment, up to one third suffer from a recurrence or a second primary tumor. It is apparent that one major cause of disease recurrence is clinically unrecognized field changes which extend beyond the visible tumor boundary. We have previously developed an approach using fluorescence visualization (FV) technology to improve the recognition of the field at risk surrounding a visible oral cancer that needs to be removed and preliminary results have shown a significant reduction in recurrence rates. This paper describes the study design of a randomized, multi-centre, double blind, controlled surgical trial, the COOLS trial. Nine institutions across Canada will recruit a total of 400 patients with oral severe dysplasia or carcinoma in situ (N = 160) and invasive squamous cell carcinoma (N = 240). Patients will be stratified by participating institution and histology grade and randomized equally into FV-guided surgery (experimental arm) or white light-guided surgery (control arm). The primary endpoint is a composite of recurrence at or 1 cm within the previous surgery site with 1) the same or higher grade histology compared to the initial diagnosis (i.e., the diagnosis used for randomization); or 2) further treatment due to the presence of severe dysplasia or higher degree of change at follow-up. This is the first randomized, multi-centre trial to validate the effectiveness of the FV-guided surgery. In this paper we described the strategies, novelty, and challenges of this unique trial involving a surgical approach guided by the FV technology. The success of the trial requires training, coordination, and quality assurance across multiple sites within Canada. The COOLS trial, an example of translational research, may result in

Operations & Maintenance Best Practices - A Guide to Achieving Operational Efficiency (Release 3)

Energy Technology Data Exchange (ETDEWEB)

Sullivan, Greg; Pugh, Ray; Melendez, Aldo P.; Hunt, W. D.

2010-08-04

This guide highlights operations and maintenance programs targeting energy and water efficiency that are estimated to save 5% to 20% on energy bills without a significant capital investment. The purpose of this guide is to provide you, the Operations and Maintenance (O&M)/Energy manager and practitioner, with useful information about O&M management, technologies, energy and water efficiency, and cost-reduction approaches. To make this guide useful and to reflect your needs and concerns, the authors met with O&M and Energy managers via Federal Energy Management Program (FEMP) workshops. In addition, the authors conducted extensive literature searches and contacted numerous vendors and industry experts. The information and case studies that appear in this guide resulted from these activities. It needs to be stated at the outset that this guide is designed to provide information on effective O&M as it applies to systems and equipment typically found at Federal facilities. This guide is not designed to provide the reader with step-by-step procedures for performing O&M on any specific piece of equipment. Rather, this guide first directs the user to the manufacturer's specifications and recommendations. In no way should the recommendations in this guide be used in place of manufacturer's recommendations. The recommendations in this guide are designed to supplement those of the manufacturer, or, as is all too often the case, provide guidance for systems and equipment for which all technical documentation has been lost. As a rule, this guide will first defer to the manufacturer's recommendations on equipment operation and maintenance.

Guide to shielding calculations for the design of fluoroscopic laboratory at 503 workshop AVN base Rawalpindi

International Nuclear Information System (INIS)

Din, J.U.; Ahmad, M.; Ashraf, M.M.; Khan, A.R.; Khan, A.A.

1986-11-01

Non-destructive testing plays an important role in assessing the quality of materials. Various methods are used for this purpose. Radiography by X-rays and gamma-rays is one of the NDT methods used. There are number of mathematical formulae used to estimate the required shielding for an X-ray tube operating at maximum rated voltage or a gamma radiation source having fixed energies. This report covers the shielding requirements for a 150 KV constant potential X-ray unit operating at maximum rated voltage. In addition, the report is a guide for the design of shielded enclosure required for X-rays machines in general. (orig./A.B.)

Policymaker's Guide to Feed-in Tariff Policy Design

Energy Technology Data Exchange (ETDEWEB)

Couture, T. D.; Cory, K.; Kreycik, C.; Williams, E.

2010-07-01

Feed-in tariffs (FITs) are the most widely used renewable energy policy in the world for driving accelerating renewable energy (RE) deployment, accounting for a greater share of RE development than either tax incentives or renewable portfolio standard (RPS) policies. FITs have generated significant RE deployment, helping bring the countries that have implemented them successfully to the forefront of the global RE industry. In the European Union (EU), FIT policies have led to the deployment of more than 15,000 MW of solar photovoltaic (PV) power and more than 55,000 MW of wind power between 2000 and the end of 2009. In total, FITs are responsible for approximately 75% of global PV and 45% of global wind deployment. Countries such as Germany, in particular, have demonstrated that FITs can be used as a powerful policy tool to drive RE deployment and help meet combined energy security and emissions reductions objectives. This policymaker's guide provides a detailed analysis of FIT policy design and implementation and identifies a set of best practices that have been effective at quickly stimulating the deployment of large amounts of RE generation. Although the discussion is aimed primarily at decision makers who have decided that a FIT policy best suits their needs, exploration of FIT policies can also help inform a choice among alternative renewable energy policies.

分宜县天工广场铺装的导向性功能设计%Guiding Function Design of the City Square Pavement——Taking Tiangong Square in Jiangxi Province as an Example

Institute of Scientific and Technical Information of China (English)

梁维; 杨柳青; 田兵

2012-01-01

In this day and age,the expression of cultural and participative characteristics of the city square design has been paid more and more attention to.However,how to complete the guiding function systematically in the pavement design of City Square is a problem that has been overlooked.In addition,the fusion of guiding function and other expressions is a difficult problem that lots of cities are facing during designing the square pavement.Based on the study of the pavement design of Jiangxi Tiangong Square,this paper intends to analyse the guiding function of square pavement,find a suitable way to express the guiding function of square pavement and use those findings to guide the design of pavement of the city squares.%指出了城市广场铺装设计中系统的完成导向性功能在城市广场设计中对于其文化性、参与性的表达具有重要意义,通过对江西省分宜县天工广场铺装设计的研究,分析了广场铺装的导向性功能,探讨了铺装导向性功能表达形式,为城市广场的铺装设计提供参考。

An optimization design proposal of automated guided vehicles for mixed type transportation in hospital environments.

Science.gov (United States)

González, Domingo; Romero, Luis; Espinosa, María Del Mar; Domínguez, Manuel

2017-01-01

The aim of this paper is to present an optimization proposal in the automated guided vehicles design used in hospital logistics, as well as to analyze the impact of its implementation in a real environment. This proposal is based on the design of those elements that would allow the vehicles to deliver an extra cart by the towing method. So, the proposal intention is to improve the productivity and the performance of the current vehicles by using a transportation method of combined carts. The study has been developed following concurrent engineering premises from three different viewpoints. First, the sequence of operations has been described, and second, a proposal of design of the equipment has been undertaken. Finally, the impact of the proposal has been analyzed according to real data from the Hospital Universitario Rio Hortega in Valladolid (Spain). In this particular case, by the implementation of the analyzed proposal in the hospital a reduction of over 35% of the current time of use can be achieved. This result may allow adding new tasks to the vehicles, and according to this, both a new kind of vehicle and a specific module can be developed in order to get a better performance.

An optimization design proposal of automated guided vehicles for mixed type transportation in hospital environments.

Directory of Open Access Journals (Sweden)

Domingo González

Full Text Available The aim of this paper is to present an optimization proposal in the automated guided vehicles design used in hospital logistics, as well as to analyze the impact of its implementation in a real environment.This proposal is based on the design of those elements that would allow the vehicles to deliver an extra cart by the towing method. So, the proposal intention is to improve the productivity and the performance of the current vehicles by using a transportation method of combined carts.The study has been developed following concurrent engineering premises from three different viewpoints. First, the sequence of operations has been described, and second, a proposal of design of the equipment has been undertaken. Finally, the impact of the proposal has been analyzed according to real data from the Hospital Universitario Rio Hortega in Valladolid (Spain. In this particular case, by the implementation of the analyzed proposal in the hospital a reduction of over 35% of the current time of use can be achieved. This result may allow adding new tasks to the vehicles, and according to this, both a new kind of vehicle and a specific module can be developed in order to get a better performance.

Lean in Air Permitting Guide

Science.gov (United States)

The Lean in Air Permitting Guide is designed to help air program managers at public agencies better understand the potential value and results that can be achieved by applying Lean improvement methods to air permitting processes.

Image-guided macular laser therapy: design considerations and progress toward implementation

Science.gov (United States)

Berger, Jeffrey W.; Shin, David S.

1999-06-01

Laser therapy is currently the only treatment of proven benefit for exudative age related macular degeneration and diabetic retinopathy. To guide treatment for macular diseases, investigations were initiated to permit overlay of previously-stored angiographic images and image sequences superimposed onto the real-time biomicroscopic fundus image. Prior to treatment, a set of partially overlapping fundus images is acquired and montaged in order to provide a map for subsequent tracking operations. A binocular slit-lamp biomicroscope interfaced to a CCD camera, framegrabber board, and PC permits acquisition and rendering of retinal images. Computer-vision algorithms facilitate robust tracking, registration, and near-video-rate image overlay of previously-stored retinal photographic and angiographic images onto the real-time fundus image. Laser treatment is guided in this augmented reality environment where the borders of the treatment target--for example, the boundaries of a choroidal neovascularization complex--are easily identified through overlay of angiographic information superimposed on, and registered with, the real-time fundus image. During periods of misregistration as judged by the amplitude of the tracking similarity metric, laser function is disabled, affording additional safety. Image-guided macular laser therapy should facilitate accurate targeting of treatable lesions and less unintentional retinal injury when compared with standard techniques.

Biophysical characterization of a relativistic proton beam for image-guided radiosurgery.

Science.gov (United States)

Yu, Zhan; Vanstalle, Marie; La Tessa, Chiara; Jiang, Guo-Liang; Durante, Marco

2012-07-01

We measured the physical and radiobiological characteristics of 1 GeV protons for possible applications in stereotactic radiosurgery (image-guided plateau-proton radiosurgery). A proton beam was accelerated at 1 GeV at the Brookhaven National Laboratory (Upton, NY) and a target in polymethyl methacrylate (PMMA) was used. Clonogenic survival was measured after exposures to 1-10 Gy in three mammalian cell lines. Measurements and simulations demonstrate that the lateral scattering of the beam is very small. The lateral dose profile was measured with or without the 20-cm plastic target, showing no significant differences up to 2 cm from the axis A large number of secondary swift protons are produced in the target and this leads to an increase of approximately 40% in the measured dose on the beam axis at 20 cm depth. The relative biological effectiveness at 10% survival level ranged between 1.0 and 1.2 on the beam axis, and was slightly higher off-axis. The very low lateral scattering of relativistic protons and the possibility of using online proton radiography during the treatment make them attractive for image-guided plateau (non-Bragg peak) stereotactic radiosurgery.

Biophysical characterization of a relativistic proton beam for image-guided radiosurgery

International Nuclear Information System (INIS)

Yu, Z.; Vanstalle, M.; La Tessa, C.; Durante, M.; Jiang Guoliang

2012-01-01

We measured the physical and radiobiological characteristics of 1 GeV protons for possible applications in stereotactic radiosurgery (image-guided plateau-proton radiosurgery). A proton beam was accelerated at 1 GeV at the Brookhaven National Laboratory (Upton, NY) and a target in polymethyl methacrylate (PMMA) was used. Clonogenic survival was measured after exposures to 1-10 Gy in three mammalian cell lines. Measurements and simulations demonstrate that the lateral scattering of the beam is very small. The lateral dose profile was measured with or without the 20-cm plastic target, showing no significant differences up to 2 cm from the axis A large number of secondary swift protons are produced in the target and this leads to an increase of approximately 40% in the measured dose on the beam axis at 20 cm depth. The relative biological effectiveness at 10% survival level ranged between 1.0 and 1.2 on the beam axis, and was slightly higher off-axis. The very low lateral scattering of relativistic protons and the possibility of using online proton radiography during the treatment make them attractive for image-guided plateau (non-Bragg peak) stereotactic radiosurgery. (author)

Experimental and numerical study of guided wave propagation in a thin metamaterial plate

International Nuclear Information System (INIS)

Zhu, R.; Huang, G.L.; Huang, H.H.; Sun, C.T.

2011-01-01

In this Letter, both in-plane and out-of-plane guided waves in a thin plate with local resonators are studied numerically and experimentally. Through the numerical simulation, a new metamaterial plate design is achieved for a low-frequency bandgap in both in-plane and out-of-plane guided waves. Experiments were conducted to validate the numerical design. In the experiment, piezoelectric transducers were used to generate and receive guided wave signals. The results show that the numerical predictions are in very good agreement with the experimental measurements. Specifically, the connection between the local resonance in the thin plate and its wave attenuation mechanism was discussed. -- Highlights: → Both in-plane and out-of-plane guided waves in a thin plate with local resonators are studied numerically and experimentally. → A new metamaterial plate design is achieved for a low-frequency bandgap in both in-plane and out-of-plane guided waves. → Experiments were conducted to validate the numerical design. → The connection between the local resonance in the thin plate and its wave attenuation mechanism was investigated.

Introduction to Artificial Vision through Laboratory Guides Using Matlab

OpenAIRE

Verónica Londoño-Osorio; Jhovana Marín-Pineda; Eliana I. Arango-Zuluaga

2013-01-01

This paper presents the design of two laboratory guides in artificial vision for a course which aims to introduce students to the different areas of specialization of his career. Therefore, the designed practices motivate and provide relevant content to the student, and to encourage research in the area of image processing. The first guide presents an introductory practice that explores the basic commands for image processing by programming a GUI in Matlab, and a second practice in which you ...

PCI DSS a practical guide to implementing and maintaining compliance

CERN Document Server

Wright, Steve

2011-01-01

This newly revised, practical guide, gives you a step by step guide to achieving Payment Card Industry Data Security Standard (PCI DSS) compliance - showing you how to create, design and build a PCI compliance framework.

Guide for dosimetry in radiation research on food and agricultural products

International Nuclear Information System (INIS)

2002-01-01

This guide covers the minimum requirements for dosimetry and absorbed-dose validation needed to conduct research on the irradiation of food and agricultural products. Such research includes establishment of the quantitative relationship between the absorbed dose and the relevant effects in these products. This guide also describes the overall need for dosimetry in such research, and in reporting of the results. This guide is intended for use by research scientists in the food and agricultural communities, and not just scientists conducting irradiation research. It, therefore, includes more tutorial information than most other ASTM and ISO/ASTM dosimetry standards for radiation processing. This guide is in no way intended to limit the flexibility of the experimenter in the experimental design. However, the radiation source and experimental set up should be chosen such that the results of the experiment will be beneficial and understandable to other scientists, regulatory agencies, and the food and agricultural communities. The effects produced by ionizing radiation in biological systems depend on a large number of factors which may be physical, physiological, or chemical. Although not treated in detail in this guide, quantitative data of environmental factors that may affect the absorbed-dose response of dosimeters, such as temperature and moisture content in the food or agricultural products should be reported. The overall uncertainty in the absorbed-dose measurement and the inherent absorbed-dose range within the specimen should be taken into account in the design of an experiment. The guide covers research conducted using the following types of ionizing radiation: gamma rays, bremsstrahlung X-rays, and electron beams. This guide does not include other aspects of radiation processing research, such as planning of the experimental design. Dosimetry must be considered as an integral part of the experimental design. The guide does not include dosimetry for irradiator

Factors of influence upon overall survival in the treatment of intracranial MPNSTs. Review of the literature and report of a case

International Nuclear Information System (INIS)

Gousias, Konstantinos; Boström, Jan; Kovacs, Attila; Niehusmann, Pitt; Wagner, Ingo; Kristof, Rudolf

2010-01-01

Intracranial malignant peripheral nerve sheath tumors are rare entities that carry a poor prognosis. To date, there are no established therapeutic strategies for these tumors. We review the present treatment modalities and present the current therapeutic dilemmas. We perform a statistical analysis to evaluate the prognostic factors for Overall Survival of these patients. Additionally, we present our experience with a 64-year-old man with a MPNST of the left cerebellopontine angle. To our best knowledge, forty three patients with intracranial MPNSTs, including our case, have been published in the international literature. Our analysis showed gross total resection, radiotherapy and female gender to be beneficial prognostic factors of survival in the univariate analysis. Gross total resection was recognized as the only independent predictor of prolonged Overall Survival. In our case, we performed a gross total resection followed for the first time by stereotactically guided radiotherapy. Considering the results of the statistical analysis and the known advantages of the stereotaxy, we suggest aggressive surgery followed by stereotactically guided radiotherapy as therapy of choice

Optical Design of COATLI: A Diffraction-Limited Visible Imager with Fast Guiding and Active Optics Correction

Science.gov (United States)

Fuentes-Fernández, J.; Cuevas, S.; Watson, A. M.

2018-04-01

We present the optical design of COATLI, a two channel visible imager for a comercial 50 cm robotic telescope. COATLI will deliver diffraction-limited images (approximately 0.3 arcsec FWHM) in the riz bands, inside a 4.2 arcmin field, and seeing limited images (approximately 0.6 arcsec FWHM) in the B and g bands, inside a 5 arcmin field, by means of a tip-tilt mirror for fast guiding, and a deformable mirror for active optics, both located on two optically transferred pupil planes. The optical design is based on two collimator-camera systems plus a pupil transfer relay, using achromatic doublets of CaF2 and S-FTM16 and one triplet of N-BK7 and CaF2. We discuss the effciency, tolerancing, thermal behavior and ghosts. COATLI will be installed at the Observatorio Astronómico Nacional in Sierra San Pedro Mártir, Baja California, Mexico, in 2018.

Computer-aided design and computer-aided modeling (CAD/CAM) generated surgical splints, cutting guides and custom-made implants: Which indications in orthognathic surgery?

Science.gov (United States)

Scolozzi, P

2015-12-01

The purpose of the present report was to describe our indications, results and complications of computer-aided design and computer-aided modeling CAD/CAM surgical splints, cutting guides and custom-made implants in orthognathic surgery. We analyzed the clinical and radiological data of ten consecutive patients with dentofacial deformities treated using a CAD/CAM technique. Four patients had surgical splints and cutting guides for correction of maxillomandibular asymmetries, three had surgical cutting guides and customized internal distractors for correction of severe maxillary deficiencies and three had custom-made implants for additional chin contouring and/or mandibular defects following bimaxillary osteotomies and sliding genioplasty. We recorded age, gender, dentofacial deformity, surgical procedure and intra- and postoperative complications. All of the patients had stable cosmetic results with a high rate of patient satisfaction at the 1-year follow-up examination. No intra- and/or postoperative complications were encountered during any of the different steps of the procedure. This study demonstrated that the application of CAD/CAM patient-specific surgical splints, cutting guides and custom-made implants in orthognathic surgery allows for a successful outcome in the ten patients presented in this series. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Building Maintenance and Utilities Management. Florida Vocational Program Guide.

Science.gov (United States)

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This program guide identifies primary concerns in the organization, operation, and evaluation of a building maintenance and utilities management program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary…

On the survivability of diagnostic windows in the CIT [Compact Ignition Tokamak] reactor

International Nuclear Information System (INIS)

Taylor, A.

1988-11-01

The problem of radiation induced stresses in CIT diagnostic windows is discussed. Existing data indicate windows of existing design will probably survive if placed on the periphery of the reactor. There is a lack of adequate engineering data upon which the design and survivability of windows can be based. 22 refs., 5 figs., 2 tabs

Survival analysis of cancer risk reduction strategies for BRCA1/2 mutation carriers.

Science.gov (United States)

Kurian, Allison W; Sigal, Bronislava M; Plevritis, Sylvia K

2010-01-10

Women with BRCA1/2 mutations inherit high risks of breast and ovarian cancer; options to reduce cancer mortality include prophylactic surgery or breast screening, but their efficacy has never been empirically compared. We used decision analysis to simulate risk-reducing strategies in BRCA1/2 mutation carriers and to compare resulting survival probability and causes of death. We developed a Monte Carlo model of breast screening with annual mammography plus magnetic resonance imaging (MRI) from ages 25 to 69 years, prophylactic mastectomy (PM) at various ages, and/or prophylactic oophorectomy (PO) at ages 40 or 50 years in 25-year-old BRCA1/2 mutation carriers. With no intervention, survival probability by age 70 is 53% for BRCA1 and 71% for BRCA2 mutation carriers. The most effective single intervention for BRCA1 mutation carriers is PO at age 40, yielding a 15% absolute survival gain; for BRCA2 mutation carriers, the most effective single intervention is PM, yielding a 7% survival gain if performed at age 40 years. The combination of PM and PO at age 40 improves survival more than any single intervention, yielding 24% survival gain for BRCA1 and 11% for BRCA2 mutation carriers. PM at age 25 instead of age 40 offers minimal incremental benefit (1% to 2%); substituting screening for PM yields a similarly minimal decrement in survival (2% to 3%). Although PM at age 25 plus PO at age 40 years maximizes survival probability, substituting mammography plus MRI screening for PM seems to offer comparable survival. These results may guide women with BRCA1/2 mutations in their choices between prophylactic surgery and breast screening.

Monterey Bay Aquarium Volunteer Guide Scheduling Analysis

Science.gov (United States)

2014-12-01

TERMS 15. NUMBER OF Monterey Bay Aquarium, linear programing, network design, multi commodity flow, resilience PAGES 17. SECURITY 18. SECURITY...Volunteers fill many roles that include Aquarium guides, information desk attendants, divers, and animal caregivers . Julie Packard, Executive Director of...further analyze the resiliency of the shifts to changes in staffing levels caused by no-shows or drop-ins. 3 While the guide program managers have

Remaining missed opportunities of child survival in Peru: modelling mortality impact of universal and equitable coverage of proven interventions

OpenAIRE

Yvonne Tam; Luis Huicho; Carlos A. Huayanay-Espinoza; María Clara Restrepo-Méndez

2016-01-01

Background Peru has made great improvements in reducing stunting and child mortality in the past decade, and has reached the Millennium Development Goals 1 and 4. The remaining challenges or missed opportunities for child survival needs to be identified and quantified, in order to guide the next steps to further improve child survival in Peru. Methods We used the Lives Saved Tool (LiST) to project the mortality impact of proven interventions reaching every women and child in need, and the mor...

Apparel. Teacher's Instructional Guide.

Science.gov (United States)

Rambo, Patti

This instructional guide for a one-half credit technological laboratory course for grades 10-12 focuses on apparel from the perspectives of personal decision making related to apparel, the apparel industry, and career preparation. Introductory materials are a course description; overview of course design; facilities, equipment, and resources; and…

Elementary Science Resource Guide.

Science.gov (United States)

Texas Education Agency, Austin. Div. of Curriculum Development.

This guide for elementary teachers provides information on getting ideas into action, designing and implementing the right situation, ways in which to evaluate science process activities with students, and seven sample units. The units cover using the senses, magnets, forces, weather forecasting, classification of living things, and the physical…

Development of the Advanced Energy Design Guide for K-12 Schools -- 50% Energy Savings

Energy Technology Data Exchange (ETDEWEB)

Bonnema, E.; Leach, M.; Pless, S.; Torcellini, P.

2013-02-01

This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-K12) (ASHRAE et al. 2011a). The AEDG-K12 provides recommendations for achieving 50% whole-building energy savings in K-12 schools over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-K12 was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy (DOE).

Hispanic Folk Arts and the Environment: An Interdisciplinary Curriculum Guide. A New Mexican Perspective.

Science.gov (United States)

Lopez, Alejandro

This interdisciplinary, bilingual curriculum resource, contains a 29-minute videotape program, 20 colorplate posters, and a curriculum guide. The resource presents an examination of the folklife and folklore expressions of the Hispanic people of New Mexico. The focus of the curriculum is the relationship of survival-based folk activities to the…

A Study on Guide Sign Validity in Driving Simulator

Directory of Open Access Journals (Sweden)

Wei Zhonghua

2011-12-01

Full Text Available The role of guide sign to inform road user about the information of network is important. How to design and locate guide sign to increase traffic operation efficiency is a key point for traffic engineers. Driving simulator is useful devised to study guide sign in the process and system control. For the purpose of studying guide signs using the tool of driving simulator, guide sign's validity in driving simulator was studied. Results of this experiment are the foundation of further study on guide sign. Simulator calibration procedure for guide sign was set up in this study. Legibility distance as measure of performance was used to evaluate the validity of guide sign in driving simulator. Thirty two participants were recruited. Results indicated legibility distance and speed were inversely related with the method of data mining. Legibility distance and text height of guide sign were positive related. When speed is 20km/h, 30km/h, 40km/h, magnifying power of text height is 4.3, 4.1, 3.8, while guide signs are absolute validity in driving simulator.

Nonreactor nuclear facilities: standards and criteria guide

International Nuclear Information System (INIS)

Brynda, W.J.; Junker, L.; Karol, R.C.; Lobner, P.R.; Goldman, L.A.

1981-09-01

This guide is a source document that identifies standards, codes, and guides that address the nuclear safety considerations pertinent to nuclear facilities as defined in DOE Order 5480.1, Chapter V, Safety of Nuclear Facilities. The guidance and criteria provided are directed toward areas of safety usually addressed in a Safety Analysis Report. The areas of safety include, but are not limited to, siting, principal design criteria and safety system design guidelines, radiation protection, accident analysis, and quality assurance. The guide is divided into two sections: general guidelines and appendices. Those guidelines that are broadly applicable to most nuclear facilities are presented in the general guidelines. These general guidelines may have limited applicability to subsurface facilities such as waste repositories. Guidelines specific to the various types or categories of nuclear facilities are presented in the appendices. These facility-specific appendices provide guidelines and identify standards and criteria that should be considered in addition to, or in lieu of, the general guidelines

Nonreactor nuclear facilities: Standards and criteria guide

International Nuclear Information System (INIS)

Brynda, W.J.; Scarlett, C.H.; Tanguay, G.E.; Lobner, P.R.

1986-09-01

This guide is a source document that identifies standards, codes, and guides that address the nuclear safety considerations pertinent to nuclear facilities as defined in DOE 5480.1A, Chapter V, ''Safety of Nuclear Facilities.'' The guidance and criteria provided is directed toward areas of safety usually addressed in a Safety Analysis Report. The areas of safety include, but are not limited to, siting, principal design criteria and safety system design guidelines, radiation protection, accident analysis, conduct of operations, and quality assurance. The guide is divided into two sections: general guidelines and appendices. Those guidelines that are broadly applicable to most nuclear facilities are presented in the general guidelines. Guidelines specific to the various types or categories of nuclear facilities are presented in the appendices. These facility-specific appendices provide guidelines and identify standards and criteria that should be considered in addition to, or in lieu of, the general guidelines. 25 figs., 62 tabs

Mixed Methods Not Mixed Messages: Improving LibGuides with Student Usability Data

Directory of Open Access Journals (Sweden)

Nora Almeida

2017-12-01

Full Text Available Abstract Objective – This article describes a mixed methods usability study of research guides created using the LibGuides 2.0 platform conducted in 2016 at an urban, public university library. The goal of the study was to translate user design and learning modality preferences into executable design principles, and ultimately to improve the design and usage of LibGuides at the New York City College of Technology Library. Methods – User-centred design demands that stakeholders participate in each stage of an application’s development and that assumptions about user design preferences are validated through testing. Methods used for this usability study include: a task analysis on paper prototypes with a think aloud protocol (TAP, an advanced scribbling technique modeled on the work of Linek and Tochtermann (2015, and semi-structured interviews. The authors introduce specifics of each protocol in addition to data collection and analysis methods. Results – The authors present quantitative and qualitative student feedback on navigation layouts, terminology, and design elements and discuss concrete institutional and technical measures they will take to implement best practices. Additionally, the authors discuss students’ impressions of multimedia, text-based, and interactive instructional content in relation to specific research scenarios defined during the usability test. Conclusion – The authors translate study findings into best practices that can be incorporated into custom user-centric LibGuide templates and assets. The authors also discuss relevant correlations between students’ learning modality preferences and design feedback, and identify several areas that warrant further research. The authors believe this study will spark a larger discussion about relationships between instructional design, learning modalities, and research guide use contexts.

Design and analysis methods for fish survival experiments based on release-recapture

National Research Council Canada - National Science Library

Burnham, Kenneth P

1987-01-01

.... The application of the methods developed here is more general, however, as it includes experiments to estimate survival of fish as they pass over spillways or through bypass systems and several dams...

Magnetic resonance imaging guided reirradiation of recurrent and second primary head and neck cancer.

Science.gov (United States)

Chen, Allen M; Cao, Minsong; Hsu, Sophia; Lamb, James; Mikaeilian, Argin; Yang, Yingli; Agazaryan, Nzhde; Low, Daniel A; Steinberg, Michael L

2017-01-01

To report a single-institutional experience using magnetic resonance imaging (MRI) guided radiation therapy for the reirradiation of recurrent and second cancers of the head and neck. Between October 2014 and August 2016, 13 consecutive patients with recurrent or new primary cancers of the head and neck that occurred in a previously irradiated field were prospectively enrolled in an institutional registry trial to investigate the feasibility and efficacy of MRI guided radiation therapy using a 0.35-T MRI scanner with a cobalt-60 radiation therapy source called the ViewRay system (ViewRay Inc., Cleveland, OH). Eligibility criteria included biopsy-proven evidence of recurrent or new primary squamous cell carcinoma of the head and neck, measurable disease, and previous radiation to >60 Gy. MRI guided reirradiation was delivered either using intensity modulated radiation therapy with conventional fractionation to a median dose of 66 Gy or stereotactic body radiation therapy (SBRT) using 7 to 8 Gy fractions on nonconsecutive days to a median dose of 40 Gy. Two patients (17%) received concurrent chemotherapy. The 1- and 2-year estimates of in-field control were 72% and 72%, respectively. A total of 227 daily MRI scans were obtained to guide reirradiation. The 2-year estimates of overall survival and progression-free survival were 53% and 59%, respectively. There were no treatment-related fatalities or hospitalizations. Complications included skin desquamation, odynophagia, otitis externa, keratitis and/or conjunctivitis, and 1 case of aspiration pneumonia. Our preliminary findings show that reirradiation with MRI guided radiation therapy results in effective disease control with relatively low morbidity for patients with recurrent and second primary cancers of the head and neck. The superior soft tissue resolution of the MRI scans that were used for planning and delivery has the potential to improve the therapeutic ratio.