Kendal, W S
2000-04-01
To illustrate how probability-generating functions (PGFs) can be employed to derive a simple probabilistic model for clonogenic survival after exposure to ionizing irradiation. Both repairable and irreparable radiation damage to DNA were assumed to occur by independent (Poisson) processes, at intensities proportional to the irradiation dose. Also, repairable damage was assumed to be either repaired or further (lethally) injured according to a third (Bernoulli) process, with the probability of lethal conversion being directly proportional to dose. Using the algebra of PGFs, these three processes were combined to yield a composite PGF that described the distribution of lethal DNA lesions in irradiated cells. The composite PGF characterized a Poisson distribution with mean, chiD+betaD2, where D was dose and alpha and beta were radiobiological constants. This distribution yielded the conventional linear-quadratic survival equation. To test the composite model, the derived distribution was used to predict the frequencies of multiple chromosomal aberrations in irradiated human lymphocytes. The predictions agreed well with observation. This probabilistic model was consistent with single-hit mechanisms, but it was not consistent with binary misrepair mechanisms. A stochastic model for radiation survival has been constructed from elementary PGFs that exactly yields the linear-quadratic relationship. This approach can be used to investigate other simple probabilistic survival models.
Survival curves for irradiated cells
International Nuclear Information System (INIS)
Gibson, D.K.
1975-01-01
The subject of the lecture is the probability of survival of biological cells which have been subjected to ionising radiation. The basic mathematical theories of cell survival as a function of radiation dose are developed. A brief comparison with observed survival curves is made. (author)
51Cr - erythrocyte survival curves
International Nuclear Information System (INIS)
Paiva Costa, J. de.
1982-07-01
Sixteen patients were studied, being fifteen patients in hemolytic state, and a normal individual as a witness. The aim was to obtain better techniques for the analysis of the erythrocytes, survival curves, according to the recommendations of the International Committee of Hematology. It was used the radiochromatic method as a tracer. Previously a revisional study of the International Literature was made in its aspects inherent to the work in execution, rendering possible to establish comparisons and clarify phonomena observed in cur investigation. Several parameters were considered in this study, hindering both the exponential and the linear curves. The analysis of the survival curves of the erythrocytes in the studied group, revealed that the elution factor did not present a homogeneous answer quantitatively to all, though, the result of the analysis of these curves have been established, through listed programs in the electronic calculator. (Author) [pt
Curvature Entropy for Curved Profile Generation
Directory of Open Access Journals (Sweden)
Koichiro Sato
2012-03-01
Full Text Available In a curved surface design, the overall shape features that emerge from combinations of shape elements are important. However, controlling the features of the overall shape in curved profiles is difficult using conventional microscopic shape information such as dimension. Herein two types of macroscopic shape information, curvature entropy and quadrature curvature entropy, quantitatively represent the features of the overall shape. The curvature entropy is calculated by the curvature distribution, and represents the complexity of a shape (one of the overall shape features. The quadrature curvature entropy is an improvement of the curvature entropy by introducing a Markov process to evaluate the continuity of a curvature and to approximate human cognition of the shape. Additionally, a shape generation method using a genetic algorithm as a calculator and the entropy as a shape generation index is presented. Finally, the applicability of the proposed method is demonstrated using the side view of an automobile as a design example.
A dose-surviving fraction curve for mouse colonic mucosa
International Nuclear Information System (INIS)
Tucker, S.L.; Thames, H.D. Jr.; Withers, H.R.; Mason, K.A.
1983-01-01
A dose-surviving fraction curve representing the response of the mouse colonic mucosa to single doses of 137 Cs gamma radiation was obtained from the results of a multifraction in vivo colony assay. Construction of the curve required an estimated of the average number of clonogens initially present per colonic crypt. The estimated clonogen count (88) was determined by a statistical method based on the use of doses per fraction common to different fractionation protocols. Parameters for the LQ and TC models of cell survival were obtained by weighted least-squares fits to the data. A comparison of the survival characteristics of cells from the mouse colonic and jejunal crypts suggested that the epithelium of the colon is less radiosensitive than that of the jejunum. (author)
ON THE TOPOLOGY OF MECHANISMS DESIGNED FOR CURVES GENERATION
Directory of Open Access Journals (Sweden)
MEREUTA Elena
2008-07-01
Full Text Available The paper presents some mechanisms used for generating simple or complex curves. The mechanisms are shown in different positions and for some special curves the demonstrations are performed.
Deriving injury risk curves using survival analysis from biomechanical experiments.
Yoganandan, Narayan; Banerjee, Anjishnu; Hsu, Fang-Chi; Bass, Cameron R; Voo, Liming; Pintar, Frank A; Gayzik, F Scott
2016-10-03
Injury risk curves from biomechanical experimental data analysis are used in automotive studies to improve crashworthiness and advance occupant safety. Metrics such as acceleration and deflection coupled with outcomes such as fractures and anatomical disruptions from impact tests are used in simple binary regression models. As an improvement, the International Standards Organization suggested a different approach. It was based on survival analysis. While probability curves for side-impact-induced thorax and abdominal injuries and frontal impact-induced foot-ankle-leg injuries are developed using this approach, deficiencies are apparent. The objective of this study is to present an improved, robust and generalizable methodology in an attempt to resolve these issues. It includes: (a) statistical identification of the most appropriate independent variable (metric) from a pool of candidate metrics, measured and or derived during experimentation and analysis processes, based on the highest area under the receiver operator curve, (b) quantitative determination of the most optimal probability distribution based on the lowest Akaike information criterion, (c) supplementing the qualitative/visual inspection method for comparing the selected distribution with a non-parametric distribution with objective measures, (d) identification of overly influential observations using different methods, and (e) estimation of confidence intervals using techniques more appropriate to the underlying survival statistical model. These clear and quantified details can be easily implemented with commercial/open source packages. They can be used in retrospective analysis and prospective design of experiments, and in applications to different loading scenarios such as underbody blast events. The feasibility of the methodology is demonstrated using post mortem human subject experiments and 24 metrics associated with thoracic/abdominal injuries in side-impacts. Published by Elsevier Ltd.
Curvature Entropy for Curved Profile Generation
Ujiie, Yoshiki; Kato, Takeo; Sato, Koichiro; Matsuoka, Yoshiyuki
2012-01-01
In a curved surface design, the overall shape features that emerge from combinations of shape elements are important. However, controlling the features of the overall shape in curved profiles is difficult using conventional microscopic shape information such as dimension. Herein two types of macroscopic shape information, curvature entropy and quadrature curvature entropy, quantitatively represent the features of the overall shape. The curvature entropy is calculated by the curvature distribu...
Extrapolation of Survival Curves from Cancer Trials Using External Information.
Guyot, Patricia; Ades, Anthony E; Beasley, Matthew; Lueza, Béranger; Pignon, Jean-Pierre; Welton, Nicky J
2017-05-01
Estimates of life expectancy are a key input to cost-effectiveness analysis (CEA) models for cancer treatments. Due to the limited follow-up in Randomized Controlled Trials (RCTs), parametric models are frequently used to extrapolate survival outcomes beyond the RCT period. However, different parametric models that fit the RCT data equally well may generate highly divergent predictions of treatment-related gain in life expectancy. Here, we investigate the use of information external to the RCT data to inform model choice and estimation of life expectancy. We used Bayesian multi-parameter evidence synthesis to combine the RCT data with external information on general population survival, conditional survival from cancer registry databases, and expert opinion. We illustrate with a 5-year follow-up RCT of cetuximab plus radiotherapy v. radiotherapy alone for head and neck cancer. Standard survival time distributions were insufficiently flexible to simultaneously fit both the RCT data and external data on general population survival. Using spline models, we were able to estimate a model that was consistent with the trial data and all external data. A model integrating all sources achieved an adequate fit and predicted a 4.7-month (95% CrL: 0.4; 9.1) gain in life expectancy due to cetuximab. Long-term extrapolation using parametric models based on RCT data alone is highly unreliable and these models are unlikely to be consistent with external data. External data can be integrated with RCT data using spline models to enable long-term extrapolation. Conditional survival data could be used for many cancers and general population survival may have a role in other conditions. The use of external data should be guided by knowledge of natural history and treatment mechanisms.
Survival curves and cell restoration of gamma irradiated chlorella
International Nuclear Information System (INIS)
Gilet, Roland
1970-01-01
The characteristics of the living material used and the cultures developed are defined. The irradiation techniques and the dosimetry methods used are described. The clonal growth in a gelified nutrient solution was studied and the survival curves, which are very reproducible when anoxic conditions are eliminated, were established. It is shown that the radiosensitivity of Chlorella decreases with the age of the culture when the plateau of the growth curve is reached, and that for synchronous cells it varies slightly with the phase in the cycle at which the radiation is received. The restoration from sublethal damage occurs quickly and does not depend upon the continuation of the cell cycle when no multiplication occurs during the experiments and is not modified by anoxic conditions. The restoration rate is reduced at 0 deg. C. It explains the variations in the apparent radiosensitivity with the dose rate. In contrast with the results published for many cells, the restoration is incomplete. The problem of the elimination of sublethal damage during clonal development is posed. A model summarizing the experimental results and suggesting future work is given. (author) [fr
SCEW: a Microsoft Excel add-in for easy creation of survival curves.
Khan, Haseeb Ahmad
2006-07-01
Survival curves are frequently used for reporting survival or mortality outcomes of experimental pharmacological/toxicological studies and of clinical trials. Microsoft Excel is a simple and widely used tool for creation of numerous types of graphic presentations however it is difficult to create step-wise survival curves in Excel. Considering the familiarity of clinicians and biomedical scientists with Excel, an algorithm survival curves in Excel worksheet (SCEW) has been developed for easy creation of survival curves directly in Excel worksheets. The algorithm has been integrated in the form of Excel add-in for easy installation and usage. The program is based on modification of frequency data for binary break-up using the spreadsheet formula functions whereas a macro subroutine automates the creation of survival curves. The advantages of this program are simple data input, minimal procedural steps and the creation of survival curves in the familiar confines of Excel.
Intercellular contact: its influence on the Dsub(q) of mammalian cell survival curves
International Nuclear Information System (INIS)
Durand, R.E.; Sutherland, R.M.
1975-01-01
Cell survival in tissues exposed to a given dose of ionizing radiation is usually greater than that of similar cells grown individually in vitro, despite the fact that the radiosensitivities (D 0 ) are virtually identical under the two conditions. An analogous increase in cell survival is observed when Chinese hamster V79-171 cells are grown in suspension culture and irradiated as multicell spheroids. Unfortunately, the information gained from the survival curves so obtained is limited by the inhomogeneity of the cell population with respect to both degree of contact and cell cycle position. The latter can be studied using synchronized small spheroids. The ratio of Dsub(q) of spheroid cells to Dsub(q) of single cells increased as the cells progressed through the cell cycle, from a minimum of 1.3 for G 1 phase cells to a maximum of 2.2 for late S-phase cells. The enhanced survival, or 'contact effect', developed slowly as the spheroids grew, after an initial latent period of about one generation cycle of the cells. A second effect of intercellular contact on mammalian cell survival has also been observed. When cells are assayed under conditions in which intercellular contact is maintained, the net cellular survival is increased further. This effect is different from the usual repair of potentially lethal damage, in that it occurs much more slowly and results in modification of the survival-curve shoulder. Not all cell types tested have shown enhanced survival when grown as spheroids. Several MNNG-induced mutants of the Chinese hamster V79-171 line have been isolated and sublines which do and do not show the contact effect are now available. These may permit study of the mechanism(s) of contact effects. (author)
Curved mesh generation and mesh refinement using Lagrangian solid mechanics
Energy Technology Data Exchange (ETDEWEB)
Persson, P.-O.; Peraire, J.
2008-12-31
We propose a method for generating well-shaped curved unstructured meshes using a nonlinear elasticity analogy. The geometry of the domain to be meshed is represented as an elastic solid. The undeformed geometry is the initial mesh of linear triangular or tetrahedral elements. The external loading results from prescribing a boundary displacement to be that of the curved geometry, and the final configuration is determined by solving for the equilibrium configuration. The deformations are represented using piecewise polynomials within each element of the original mesh. When the mesh is sufficiently fine to resolve the solid deformation, this method guarantees non-intersecting elements even for highly distorted or anisotropic initial meshes. We describe the method and the solution procedures, and we show a number of examples of two and three dimensional simplex meshes with curved boundaries. We also demonstrate how to use the technique for local refinement of non-curved meshes in the presence of curved boundaries.
Research of Cubic Bezier Curve NC Interpolation Signal Generator
Directory of Open Access Journals (Sweden)
Shijun Ji
2014-08-01
Full Text Available Interpolation technology is the core of the computer numerical control (CNC system, and the precision and stability of the interpolation algorithm directly affect the machining precision and speed of CNC system. Most of the existing numerical control interpolation technology can only achieve circular arc interpolation, linear interpolation or parabola interpolation, but for the numerical control (NC machining of parts with complicated surface, it needs to establish the mathematical model and generate the curved line and curved surface outline of parts and then discrete the generated parts outline into a large amount of straight line or arc to carry on the processing, which creates the complex program and a large amount of code, so it inevitably introduce into the approximation error. All these factors affect the machining accuracy, surface roughness and machining efficiency. The stepless interpolation of cubic Bezier curve controlled by analog signal is studied in this paper, the tool motion trajectory of Bezier curve can be directly planned out in CNC system by adjusting control points, and then these data were put into the control motor which can complete the precise feeding of Bezier curve. This method realized the improvement of CNC trajectory controlled ability from the simple linear and circular arc to the complex project curve, and it provides a new way for economy realizing the curve surface parts with high quality and high efficiency machining.
Survival curves study of platelet labelling with 51Cr
International Nuclear Information System (INIS)
Penas, M.E.
1981-01-01
Platelet kinetics and idiopathic thrombocytopenic purpura were researched in the literature. An 'in vitro' platelet labelling with 51 Cr procedure in implementation has been evaluated in human beings. Functions used for fitting considered the cases whether the curve was linear or exponential as well as the presence of hematies. (author)
International Nuclear Information System (INIS)
Fertil, B.; Deschavanne, P.; Malaise, E.P.; Lachet, B.
1978-01-01
The 'in vitro' radiosensitivity to γ rays of 6 human cell lines is studied by the colony method: 3 cell lines are derived from colorectal carcinomas, one from a squamous cell carcinoma, one from a Melanoma and the last one is a non-transformed fibroblast cell line. We have attempted to get the lowest percentage of surviving cells as possible. We have used four statistical models to fit the different survival curves: the multitarget single hit, the multitarget two hits, the 'Wideroe', and the quadratic models. The main conclusions drawn from these analyses are the following: -the discrimination between the models could be done by the shape of the curve and the accuracy of the experimental results, but also by the determination of the cell survival after high doses. The quadratic model fits in best with the suvival curves of the 6 cell lines. It allows an accurate description of the shoulder of the survival curves and thus provides information for the comprehension of results in the radiotherapy of human cancers. The quadratic dependence of the surviving fraction on the dose is precisely determined; -significative differences in radiosensitivity show up among the cell lines. The biological interpretation of this finding is discussed: -concerning the fibroblast cell line, it appears that: as opposed to most results published till now, the interpretation of their survival curves must be based upon a quadratic radiation action. Despite their radiosensitivity higher than most other mammalian cells in vitro, fibroblast cells seem to have a comparable survival curve
PLANAR MECHANISMS USED FOR GENERATING CURVE LINE TRANSLATION MOTION
Directory of Open Access Journals (Sweden)
Ovidiu ANTONESCU
2015-05-01
Full Text Available The curve line translation motion can be generated in the particular form of the circular translation, through mono-mobile mechanisms with articulated links of simple parallelogram type (with a fixed side or through transmission with toothed belt with a fixed wheel. Also, the circular translation can be generated through planar mechanisms with two cylindrical gears with a fixed central wheel. It is mentioned that the two cylindrical gearings of the Fergusson mechanisms are both exterior and interior.
A Conjectural Generating Function for Numbers of Curves on Surfaces
Göttsche, Lothar
I give a conjectural generating function for the numbers of δ-nodal curves in a linear system of dimension δ on an algebraic surface. It reproduces the results of Vainsencher [V] for the case δ &\\le 6 and Kleiman-Piene [K-P] for the case δ &\\le 8. The numbers of curves are expressed in terms of five universal power series, three of which I give explicitly as quasimodular forms. This gives in particular the numbers of curves of arbitrary genus on a K3 surface and an abelian surface in terms of quasimodular forms, generalizing the formula of Yau-Zaslow for rational curves on K3 surfaces. The coefficients of the other two power series can be determined by comparing with the recursive formulas of Caporaso-Harris for the Severi degrees in 2. We verify the conjecture for genus 2 curves on an abelian surface. We also discuss a link of this problem with Hilbert schemes of points.
Solar updraft power generator with radial and curved vanes
Hafizh, Hadyan; Hamsan, Raziff; Zamri, Aidil Azlan Ahmad; Keprawi, Mohamad Fairuz Mohamad; Shirato, Hiromichi
2018-02-01
Solar radiation is the largest source of energy available on earth and the solar updraft power generator (SUPG) is a renewable energy facility capable of harnessing its abundant power. Unlike the conventional wind turbines that harness natural wind in the atmosphere and often encounter with the intermittent issue or even complete cut-off from airflow, the SUPG creates artificial wind as a result of solar-induced convective flows. However, the SUPG has an inherent low total efficiency due to the conversion of thermal energy into pressure energy. Acknowledging the low efficiency and considering its potential as a renewable energy facility, the current work aims to increase the total efficiency by installing a series of guide walls inside the collector. Two types of guide walls were used i.e. radial and curved vanes. The result with curved vanes showed that the updraft velocity is higher compare to those without vanes. About 18% and 64% improvement of updraft velocity and mechanical power were attained respectively. Furthermore, it was observed that the role of radial vanes configuration was more to produce a smooth updraft velocity profile rather than increasing the total efficiency.
Mathematical analysis of 51Cr-labelled red cell survival curves in congenital haemolytic anaemias
International Nuclear Information System (INIS)
Kasfiki, A.G.; Antipas, S.E.; Dimitriou, P.A.; Gritzali, F.A.; Melissinos, K.G.
1982-01-01
The parameters of 51 Cr labelled red cell survival curves were calculated in 26 patients with homozygous β-thalassaemia, 8 with sickle-cell anaemia and 3 with s-β-thalassaemia, using a non-linear weighted least squares analysis computer program. In thalassaemic children the calculated parameters denote that the shorting of the mean cell life is due to early senescence alone, while there is some evidence that in thalassaemic adults additional extracellular destruction mechanisms participate as well. Red cell survival curves from patients with sickle-cell anaemia and s-β-thalassaemia resemble each other, while their parameters indicate an initial rapid loss of radioactivity, early senescence and the presence of extracellular red cell destruction factors. (orig.)
Toward computer simulation of high-LET in vitro survival curves
Heuskin, A.-C.; Michiels, C.; Lucas, S.
2013-09-01
We developed a Monte Carlo based computer program called MCSC (Monte Carlo Survival Curve) able to predict the survival fraction of cells irradiated in vitro with a broad beam of high linear energy transfer particles. Three types of cell responses are studied: the usual high dose response, the bystander effect and the low-dose hypersensitivity (HRS). The program models the broad beam irradiation and double strand break distribution following Poisson statistics. The progression of cells through the cell cycle is taken into account while the repair takes place. Input parameters are experimentally determined for A549 lung carcinoma cells irradiated with 10 and 20 keV µm-1 protons, 115 keV µm-1 alpha particles and for EAhy926 endothelial cells exposed to 115 keV µm-1 alpha particles. Results of simulations are presented and compared with experimental survival curves obtained for A549 and EAhy296 cells. Results are in good agreement with experimental data for both cell lines and all irradiation protocols. The benefits of MCSC are several: the gain of time that would have been spent performing time-consuming clonogenic assays, the capacity to estimate survival fraction of cell lines not forming colonies and possibly the evaluation of radiosensitivity parameters of given individuals.
A generative Bezier curve model for surf-zone tracking in coastal image sequences
CSIR Research Space (South Africa)
Burke, Michael G
2017-09-01
Full Text Available This work introduces a generative Bezier curve model suitable for surf-zone curve tracking in coastal image sequences. The model combines an adaptive curve parametrised by control points governed by local random walks with a global sinusoidal motion...
Log-cubic method for generation of soil particle size distribution curve.
Shang, Songhao
2013-01-01
Particle size distribution (PSD) is a fundamental physical property of soils. Traditionally, the PSD curve was generated by hand from limited data of particle size analysis, which is subjective and may lead to significant uncertainty in the freehand PSD curve and graphically estimated cumulative particle percentages. To overcome these problems, a log-cubic method was proposed for the generation of PSD curve based on a monotone piecewise cubic interpolation method. The log-cubic method and commonly used log-linear and log-spline methods were evaluated by the leave-one-out cross-validation method for 394 soil samples extracted from UNSODA database. Mean error and root mean square error of the cross-validation show that the log-cubic method outperforms two other methods. What is more important, PSD curve generated by the log-cubic method meets essential requirements of a PSD curve, that is, passing through all measured data and being both smooth and monotone. The proposed log-cubic method provides an objective and reliable way to generate a PSD curve from limited soil particle analysis data. This method and the generated PSD curve can be used in the conversion of different soil texture schemes, assessment of grading pattern, and estimation of soil hydraulic parameters and erodibility factor.
Directory of Open Access Journals (Sweden)
Jonas Kalderstam
Full Text Available We investigate a new method to place patients into risk groups in censored survival data. Properties such as median survival time, and end survival rate, are implicitly improved by optimizing the area under the survival curve. Artificial neural networks (ANN are trained to either maximize or minimize this area using a genetic algorithm, and combined into an ensemble to predict one of low, intermediate, or high risk groups. Estimated patient risk can influence treatment choices, and is important for study stratification. A common approach is to sort the patients according to a prognostic index and then group them along the quartile limits. The Cox proportional hazards model (Cox is one example of this approach. Another method of doing risk grouping is recursive partitioning (Rpart, which constructs a decision tree where each branch point maximizes the statistical separation between the groups. ANN, Cox, and Rpart are compared on five publicly available data sets with varying properties. Cross-validation, as well as separate test sets, are used to validate the models. Results on the test sets show comparable performance, except for the smallest data set where Rpart's predicted risk groups turn out to be inverted, an example of crossing survival curves. Cross-validation shows that all three models exhibit crossing of some survival curves on this small data set but that the ANN model manages the best separation of groups in terms of median survival time before such crossings. The conclusion is that optimizing the area under the survival curve is a viable approach to identify risk groups. Training ANNs to optimize this area combines two key strengths from both prognostic indices and Rpart. First, a desired minimum group size can be specified, as for a prognostic index. Second, the ability to utilize non-linear effects among the covariates, which Rpart is also able to do.
Collisions in Fast Generation of Ideal Classes and Points on Hyperelliptic and Elliptic Curves
DEFF Research Database (Denmark)
Lange, Tanja; Shparlinski, Igor
2005-01-01
Koblitz curves have been proposed to quickly generate random ideal classes and points on hyperelliptic and elliptic curves. To obtain a further speed-up a different way of generating these random elements has recently been proposed. In this paper we give an upper bound on the number of collisions...... for this alternative approach. For elliptic Koblitz curves we additionally use the same methods to derive a bound for a modified algorithm. These bounds are tight for cyclic subgroups of prime order, which is the case of most practical interest for cryptography....
Stewart, David J.; Behrens, Carmen; Roth, Jack; Wistuba, Ignacio I.
2010-01-01
Background For processes that follow first order kinetics, exponential decay nonlinear regression analysis (EDNRA) may delineate curve characteristics and suggest processes affecting curve shape. We conducted a preliminary feasibility assessment of EDNRA of patient survival curves. Methods EDNRA was performed on Kaplan-Meier overall survival (OS) and time-to-relapse (TTR) curves for 323 patients with resected NSCLC and on OS and progression-free survival (PFS) curves from selected publications. Results and Conclusions In our resected patients, TTR curves were triphasic with a “cured” fraction of 60.7% (half-life [t1/2] >100,000 months), a rapidly-relapsing group (7.4%, t1/2=5.9 months) and a slowly-relapsing group (31.9%, t1/2=23.6 months). OS was uniphasic (t1/2=74.3 months), suggesting an impact of co-morbidities; hence, tumor molecular characteristics would more likely predict TTR than OS. Of 172 published curves analyzed, 72 (42%) were uniphasic, 92 (53%) were biphasic, 8 (5%) were triphasic. With first-line chemotherapy in advanced NSCLC, 87.5% of curves from 2-3 drug regimens were uniphasic vs only 20% of those with best supportive care or 1 drug (p<0.001). 54% of curves from 2-3 drug regimens had convex rapid-decay phases vs 0% with fewer agents (p<0.001). Curve convexities suggest that discontinuing chemotherapy after 3-6 cycles “synchronizes” patient progression and death. With postoperative adjuvant chemotherapy, the PFS rapid-decay phase accounted for a smaller proportion of the population than in controls (p=0.02) with no significant difference in rapid-decay t1/2, suggesting adjuvant chemotherapy may move a subpopulation of patients with sensitive tumors from the relapsing group to the cured group, with minimal impact on time to relapse for a larger group of patients with resistant tumors. In untreated patients, the proportion of patients in the rapid-decay phase increased (p=0.04) while rapid-decay t1/2 decreased (p=0.0004) with increasing
International Nuclear Information System (INIS)
Lachet, Bernard.
1975-01-01
A statistical study was carried out on 208 survival curves for chlorella subjected to γ or particle radiations. The computing programmes used were written in Fortran. The different experimental causes contributing to the variance of a survival rate are analyzed and consequently the experiments can be planned. Each curve was fitted to four models by the weighted least squares method applied to non-linear functions. The validity of the fits obtained can be checked by the F test. It was possible to define the confidence and prediction zones around an adjusted curve by weighting of the residual variance, in spite of error on the doses delivered; the confidence limits can them be fixed for a dose estimated from an exact or measured survival. The four models adopted were compared for the precision of their fit (by a non-parametric simultaneous comparison test) and the scattering of their adjusted parameters: Wideroe's model gives a very good fit with the experimental points in return for a scattering of its parameters, which robs them of their presumed meaning. The principal component analysis showed the statistical equivalence of the 1 and 2 hit target models. Division of the irradiation into two doses, the first fixed by the investigator, leads to families of curves for which the equation was established from that of any basic model expressing the dose survival relationship in one-stage irradiation [fr
The S-curve for forecasting waste generation in construction projects.
Lu, Weisheng; Peng, Yi; Chen, Xi; Skitmore, Martin; Zhang, Xiaoling
2016-10-01
Forecasting construction waste generation is the yardstick of any effort by policy-makers, researchers, practitioners and the like to manage construction and demolition (C&D) waste. This paper develops and tests an S-curve model to indicate accumulative waste generation as a project progresses. Using 37,148 disposal records generated from 138 building projects in Hong Kong in four consecutive years from January 2011 to June 2015, a wide range of potential S-curve models are examined, and as a result, the formula that best fits the historical data set is found. The S-curve model is then further linked to project characteristics using artificial neural networks (ANNs) so that it can be used to forecast waste generation in future construction projects. It was found that, among the S-curve models, cumulative logistic distribution is the best formula to fit the historical data. Meanwhile, contract sum, location, public-private nature, and duration can be used to forecast construction waste generation. The study provides contractors with not only an S-curve model to forecast overall waste generation before a project commences, but also with a detailed baseline to benchmark and manage waste during the course of construction. The major contribution of this paper is to the body of knowledge in the field of construction waste generation forecasting. By examining it with an S-curve model, the study elevates construction waste management to a level equivalent to project cost management where the model has already been readily accepted as a standard tool. Copyright © 2016 Elsevier Ltd. All rights reserved.
Norris, Mary Jane
2004-01-01
The survival and maintenance of Aboriginal languages in Canada depend on their transmission from generation to generation. Children are the future speakers of a language. This paper demonstrates that the family and the community together play critical roles in the transmission of language from parent to child. On their own, neither family capacity…
The strategy curve. A method for representing and interpreting generator bidding strategies
International Nuclear Information System (INIS)
Lucas, N.; Taylor, P.
1995-01-01
The pool is the novel trading arrangement at the heart of the privatized electricity market in England and Wales. This central role in the new system makes it crucial that it is seen to function efficiently. Unfortunately, it is governed by a set of complex rules, which leads to a lack of transparency, and this makes monitoring of its operation difficult. This paper seeks to provide a method for illuminating one aspect of the pool, that of generator bidding behaviour. We introduce the concept of a strategy curve, which is a concise device for representing generator bidding strategies. This curve has the appealing characteristic of directly revealing any deviation in the bid price of a genset from the costs of generating electricity. After a brief discussion about what constitutes price and cost in this context we present a number of strategy curves for different days and provide some interpretation of their form, based in part on our earlier work with game theory. (author)
Directory of Open Access Journals (Sweden)
A. V. Khohlov
2016-01-01
Full Text Available The article analyses a one-dimensional linear integral constitutive equation of viscoelasticity with an arbitrary creep compliance function in order to reveal its abilities to describe the set of basic rheological phenomena pertaining to viscoelastoplastic materials at a constant temperature. General equations and basic properties of its quasi-static theoretic curves (i.e. stress-strain curves at constant strain or stress rates, creep, creep recovery, creep curves at piecewise-constant stress and ramp relaxation curves generated by the linear constitutive equation are derived and studied analytically. Their dependences on a creep function and relaxation modulus and on the loading program parameters are examined.The qualitative properties of the theoretic curves are compared to the typical properties of viscoelastoplastic materials test curves to reveal the mechanical effects, which the linear viscoelasticity theory cannot simulate and to find out convenient experimental indicators marking the field of its applicability or non-applicability. The minimal set of general restrictions that should be imposed on a creep and relaxation functions to provide an adequate description of typical test curves of viscoelastoplastic materials is formulated. It is proved, in particular, that an adequate simulation of typical experimental creep recovery curves requires that the derivative of a creep function should not increase at any point. This restriction implies that the linear viscoelasticity theory yields theoretical creep curves with non-increasing creep rate only and it cannot simulate materials demonstrating an accelerated creep stage. It is also proved that the linear viscoelasticity cannot simulate materials with experimental stress-strain curves possessing a maximum point or concave-up segment and materials exhibiting equilibrium modulus dependence on the strain rate or negative rate sensitivity.Similar qualitative analysis seems to be an important
A Method to Generate Freeform Curves from a Hand-drawn Sketch
Directory of Open Access Journals (Sweden)
Tetsuzo Kuragano
2007-04-01
Full Text Available When designers begin a product design, they create their ideas and expand them. This process is performed on paper, and designers' hand-drawn lines are called sketches. If the designers' hand-drawn sketches can be realized as real curves, it would be effective in shortening the design period. We have developed a method to extract five degree Bezier curves based on a hand-drawn sketch. The basic techniques to detect curves based on a hand-drawn sketch are described. First, light intensity transformation, binarization of the hand-drawn sketch, and feature based erosion and dilation to smooth the edges of the binary sketch image are described. Then, line segment determination using the detected edges is described. Using the determined line segments a five degree Bezier curve generation is described. A curve shape modification algorithm is described to reconstruct a five degree Bezier curve. Examples of five degree fair curvature Bezier curves based on a sketch are given.
Energy Technology Data Exchange (ETDEWEB)
Yan, Hongxiang [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland Washington United States; Sun, Ning [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland Washington United States; Wigmosta, Mark [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland Washington United States; Distinguished Faculty Fellow, Department of Civil and Environmental Engineering, University of Washington, Seattle Washington United States; Skaggs, Richard [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland Washington United States; Hou, Zhangshuan [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland Washington United States; Leung, Ruby [Earth and Biological Sciences Directorate, Pacific Northwest National Laboratory, Richland Washington United States
2018-02-01
There is a renewed focus on the design of infrastructure resilient to extreme hydrometeorological events. While precipitation-based intensity-duration-frequency (IDF) curves are commonly used as part of infrastructure design, a large percentage of peak runoff events in snow-dominated regions are caused by snowmelt, particularly during rain-on-snow (ROS) events. In these regions, precipitation-based IDF curves may lead to substantial over-/under-estimation of design basis events and subsequent over-/under-design of infrastructure. To overcome this deficiency, we proposed next-generation IDF (NG-IDF) curves, which characterize the actual water reaching the land surface. We compared NG-IDF curves to standard precipitation-based IDF curves for estimates of extreme events at 376 Snowpack Telemetry (SNOTEL) stations across the western United States that each had at least 30 years of high-quality records. We found standard precipitation-based IDF curves at 45% of the stations were subject to under-design, many with significant under-estimation of 100-year extreme events, for which the precipitation-based IDF curves can underestimate water potentially available for runoff by as much as 125% due to snowmelt and ROS events. The regions with the greatest potential for under-design were in the Pacific Northwest, the Sierra Nevada Mountains, and the Middle and Southern Rockies. We also found the potential for over-design at 20% of the stations, primarily in the Middle Rockies and Arizona mountains. These results demonstrate the need to consider snow processes in the development of IDF curves, and they suggest use of the more robust NG-IDF curves for hydrologic design in snow-dominated environments.
CURVES AND AESTHETIC SURFACES GENERATED BY THE R-R-RTR MECHANISM
Directory of Open Access Journals (Sweden)
Liliana LUCA
2013-05-01
Full Text Available Let’s consider a mechanism having two driving elements with revolving movements and a RTR dyad, with elements of null length and aesthetic tracks of a point are determined on a rod, for various linear movement laws of driving elements. The generated curves revolve around x and y axes and aesthetic surfaces result.
Generators for the em>l>-torsion subgroup of Jacobians of Genus Two Curves
DEFF Research Database (Denmark)
Ravnshøj, Christian Robenhagen
2008-01-01
We give an explicit description of the matrix representation of the Frobenius endomorphism on the Jacobian of a genus two curve on the subgroup of l-torsion points. By using this description, we can describe the matrix representation of the Weil-pairing on the subgroup of l-torsion points explici...... explicitly. Finally, the explicit description of the Weil-pairing provides us with an efficient, probabilistic algorithm to find generators of the subgroup of l-torsion points on the Jacobian of a genus two curve....
Confidence Band for the Differences between Two Direct Adjusted Survival Curves
Directory of Open Access Journals (Sweden)
Hong Wang
2016-04-01
Full Text Available This paper focuses on comparing the survival outcomes of two treatments while adjusting for multiple demographic and clinical factors. We wish to answer the question: "At what times do the survival outcomes of two treatments differ?". Previous work by Zhang and Klein (2001 addressed this issue by considering a stratified Cox model and by constructing the confidence band for the differences between survival functions of treatments, for a given subject. In this study, we utilize direct adjusted survivals of treatments, so that treatment comparison can be performed on a general basis. The confidence band for the differences between direct adjusted survivals was constructed using the simulation method. We developed two SAS macros that compute the band. The first macro was developed for data sets consisting of fixed covariates only. The second macro was developed based on the piecewise proportional hazards Cox model and allows for timedependent variables. We illustrate both macros by analyzing the survival data of a cohort of lymphoma patients.
Why the Kantian ideal survives medical learning curves, and why it matters.
Brecher, B
2006-09-01
The "Kantian ideal" is often misunderstood as invoking individual autonomy rather than rational self legislation. Le Morvan and Stock's otherwise insightful discussion of "Medical learning curves and the Kantian ideal"--for example--draws the mistaken inference that that ideal is inconsistent with the realities of medical practice. But it is not. Rationally to be a patient entails accepting its necessary conditions.
DEFF Research Database (Denmark)
Klein, John P.; Keiding, Niels; Shu, Youyi
2000-01-01
CML, donor lymphocyte infusion, leukaemia-free survival, current leukaemia-free survival, statistical methods......CML, donor lymphocyte infusion, leukaemia-free survival, current leukaemia-free survival, statistical methods...
Serôdio, João; Ezequiel, João; Frommlet, Jörg; Laviale, Martin; Lavaud, Johann
2013-11-01
Light-response curves (LCs) of chlorophyll fluorescence are widely used in plant physiology. Most commonly, LCs are generated sequentially, exposing the same sample to a sequence of distinct actinic light intensities. These measurements are not independent, as the response to each new light level is affected by the light exposure history experienced during previous steps of the LC, an issue particularly relevant in the case of the popular rapid light curves. In this work, we demonstrate the proof of concept of a new method for the rapid generation of LCs from nonsequential, temporally independent fluorescence measurements. The method is based on the combined use of sample illumination with digitally controlled, spatially separated beams of actinic light and a fluorescence imaging system. It allows the generation of a whole LC, including a large number of actinic light steps and adequate replication, within the time required for a single measurement (and therefore named "single-pulse light curve"). This method is illustrated for the generation of LCs of photosystem II quantum yield, relative electron transport rate, and nonphotochemical quenching on intact plant leaves exhibiting distinct light responses. This approach makes it also possible to easily characterize the integrated dynamic light response of a sample by combining the measurement of LCs (actinic light intensity is varied while measuring time is fixed) with induction/relaxation kinetics (actinic light intensity is fixed and the response is followed over time), describing both how the response to light varies with time and how the response kinetics varies with light intensity.
Meshram, S. Gajbhiye; Sharma, S. K.; Tignath, S.
2017-07-01
Watershed is an ideal unit for planning and management of land and water resources (Gajbhiye et al., IEEE international conference on advances in technology and engineering (ICATE), Bombay, vol 1, issue 9, pp 23-25, 2013a; Gajbhiye et al., Appl Water Sci 4(1):51-61, 2014a; Gajbhiye et al., J Geol Soc India (SCI-IF 0.596) 84(2):192-196, 2014b). This study aims to generate the curve number, using remote sensing and geographical information system (GIS) and the effect of slope on curve number values. The study was carried out in Kanhaiya Nala watershed located in Satna district of Madhya Pradesh. Soil map, Land Use/Land cover and slope map were generated in GIS Environment. The CN parameter values corresponding to various soil, land cover, and land management conditions were selected from Natural Resource Conservation Service (NRCS) standard table. Curve number (CN) is an index developed by the NRCS, to represent the potential for storm water runoff within a drainage area. The CN for a drainage basin is estimated using a combination of land use, soil, and antecedent soil moisture condition (AMC). In present study effect of slope on CN values were determined. The result showed that the CN unadjusted value are higher in comparison to CN adjusted with slope. Remote sensing and GIS is very reliable technique for the preparation of most of the input data required by the SCS curve number model.
Intracellular contacts - effect of survival curve of mammal cells on the Dq value
International Nuclear Information System (INIS)
Durand, R.E.; Sutherland, R.M.
1980-01-01
Survival increase is observed in cells of the Chinese hamster of the V79-171 line which grow in the composition of multicell spheroids as compared with the survival after irradiation in a single state. The ratio of the Dsub(q) cell value in the composition of spheroids to Dsub(q) of separately growing cells increases as the mitotic cycle proceeds from the minimum value of 1.3 for cells in the Gi phase to the maximum value of 2.2 for cells in a late S-phase. The increase of survival during growth in the composition of spheroids is not characteristic for all cell types. Only a part of cultured MNNG-mutants of cells of the V79-171 Chinese hamster reveal radiomodifying effect of cell contact acting [ru
International Nuclear Information System (INIS)
Takagi, T.; Miki, K.; Chen, B.C.J.; Sha, W.T.
1985-01-01
A new method is presented for numerically generating boundary-fitted coordinate systems for arbitrarily curved surfaces. The three-dimensional surface has been expressed by functions of two parameters using the geometrical modeling techniques in computer graphics. This leads to new quasi-one- and two-dimensional elliptic partial differential equations for coordinate transformation. Since the equations involve the derivatives of the surface expressions, the grids geneated by the equations distribute on the surface depending on its slope and curvature. A computer program GRID-CS based on the method was developed and applied to a surface of the second order, a torus and a surface of a primary containment vessel for a nuclear reactor. These applications confirm that GRID-CS is a convenient and efficient tool for grid generation on arbitrarily curved surfaces
An Improved MPPT Algorithm for PV Generation Applications Based on P-U Curve Reconstitution
Wang, Yaoqiang; Zhang, Meiling; Cheng, Xian
2016-01-01
The output power of PV array changes with the variation of environmental factors, such as temperature and solar irradiation. Therefore, a maximum power point (MPP) tracking (MPPT) algorithm is essential for the photovoltaic generation system. However, the P-U curve changes dynamically with the variation of the environmental factors; here, the misjudgment may occur if a simple perturb-and-observe (P&O) MPPT algorithm is used. In order to solve this problem, this paper takes MPPT as the main re...
Canonical generators of the cohomology of moduli of parabolic bundles on curves
International Nuclear Information System (INIS)
Biswas, I.; Raghavendra, N.
1994-11-01
We determine generators of the rational cohomology algebras of moduli spaces of parabolic vector bundles on a curve, under some 'primality' conditions on the parabolic datum. These generators are canonical in a precise sense. Our results are new even for usual vector bundles (i.e., vector bundles without parabolic structure) whose rank is greater than 2 and is coprime to the degree; in this case, they are generalizations of a theorem of Newstead on the moduli of vector bundles of rank 2 and odd degree. (author). 11 refs
McKenna, F W; Ahmad, S
2009-03-21
Stereotactic body radiation therapy (SBRT) uses high doses of radiation to treat tumors. The cell survival behavior at these high doses is subject to debate. We investigated this high-dose region by fitting a variety of formulas to cell survival data. Each of the formulas is motivated by a discussion of the theory of cell survival. Fourteen cell lines are examined. These are fit to a variety of equations. Among the equations include the traditional single-hit multi-target and linear quadratic as well as recent proposals such as the universal survival curve (USC). The chi(2)/df of each fit is compared to determine the best fit. While no formula is clearly superior for all cell lines, the newer formulas often provide better fits than the single-hit multi-target and linear quadratic. We recommend that the more recent formula discussed herein be used over the linear quadratic in dealing with the high-dose regions dealt with in SBRT.
Arbulú, Italo; Lozano, Javier; Rey-Maquieira, Javier
2015-12-01
The relationship between tourism growth and municipal solid waste (MSW) generation has been, until now, the subject of little research. This is puzzling since the tourism sector is an important MSW generator and, at the same time, is willing to avoid negative impacts from MSW mismanagement. This paper aims to provide tools for tourism and MSW management by assessing the effects of tourism volume, tourism quality and tourism specialization on MSW generation in the UE. This is done using the Environmental Kuznets Curve (EKC) framework. The study considers a panel data for 32 European economies in the 1997-2010 periods. Empirical results support the EKC hypothesis for MSW and shows that northern countries tend to have lower income elasticity than less developed countries; furthermore, results confirm a non-linear and significant effect of tourism arrivals, expenditure per tourist and tourism specialization on MSW generation. Copyright © 2015 Elsevier Ltd. All rights reserved.
Practical Constraint K-Segment Principal Curve Algorithms for Generating Railway GPS Digital Map
Directory of Open Access Journals (Sweden)
Dewang Chen
2013-01-01
Full Text Available In order to obtain a decent trade-off between the low-cost, low-accuracy Global Positioning System (GPS receivers and the requirements of high-precision digital maps for modern railways, using the concept of constraint K-segment principal curves (CKPCS and the expert knowledge on railways, we propose three practical CKPCS generation algorithms with reduced computational complexity, and thereafter more suitable for engineering applications. The three algorithms are named ALLopt, MPMopt, and DCopt, in which ALLopt exploits global optimization and MPMopt and DCopt apply local optimization with different initial solutions. We compare the three practical algorithms according to their performance on average projection error, stability, and the fitness for simple and complex simulated trajectories with noise data. It is found that ALLopt only works well for simple curves and small data sets. The other two algorithms can work better for complex curves and large data sets. Moreover, MPMopt runs faster than DCopt, but DCopt can work better for some curves with cross points. The three algorithms are also applied in generating GPS digital maps for two railway GPS data sets measured in Qinghai-Tibet Railway (QTR. Similar results like the ones in synthetic data are obtained. Because the trajectory of a railway is relatively simple and straight, we conclude that MPMopt works best according to the comprehensive considerations on the speed of computation and the quality of generated CKPCS. MPMopt can be used to obtain some key points to represent a large amount of GPS data. Hence, it can greatly reduce the data storage requirements and increase the positioning speed for real-time digital map applications.
Directory of Open Access Journals (Sweden)
Seyed M.H. NABAVI
2015-05-01
Full Text Available One of the most important subjects in power systems is an optimal and economic design of power transformers. In this paper, determination of turn ratios for power transformers that are directly connected to generators is evaluated considering reactive power generation and its impact on the optimal turn ratio selection. A generator capability curve has been used to explain all details. Three different methods have been examined and the simulation results have been compared in a real test system, on Rudbar-Lorestan, Karkheh, Karoon 3, Masjed Solayman, and Gotvand hydro power plants. The obtained results illustrate that without considering limits of reactive power the achieved turn ratios can be much higher than the optimal values.
A neural network driving curve generation method for the heavy-haul train
Directory of Open Access Journals (Sweden)
Youneng Huang
2016-05-01
Full Text Available The heavy-haul train has a series of characteristics, such as the locomotive traction properties, the longer length of train, and the nonlinear train pipe pressure during train braking. When the train is running on a continuous long and steep downgrade railway line, the safety of the train is ensured by cycle braking, which puts high demands on the driving skills of the driver. In this article, a driving curve generation method for the heavy-haul train based on a neural network is proposed. First, in order to describe the nonlinear characteristics of train braking, the neural network model is constructed and trained by practical driving data. In the neural network model, various nonlinear neurons are interconnected to work for information processing and transmission. The target value of train braking pressure reduction and release time is achieved by modeling the braking process. The equation of train motion is computed to obtain the driving curve. Finally, in four typical operation scenarios, comparing the curve data generated by the method with corresponding practical data of the Shuohuang heavy-haul railway line, the results show that the method is effective.
An Improved MPPT Algorithm for PV Generation Applications Based on P-U Curve Reconstitution
Directory of Open Access Journals (Sweden)
Yaoqiang Wang
2016-01-01
Full Text Available The output power of PV array changes with the variation of environmental factors, such as temperature and solar irradiation. Therefore, a maximum power point (MPP tracking (MPPT algorithm is essential for the photovoltaic generation system. However, the P-U curve changes dynamically with the variation of the environmental factors; here, the misjudgment may occur if a simple perturb-and-observe (P&O MPPT algorithm is used. In order to solve this problem, this paper takes MPPT as the main research object, and an improved MPPT algorithm for PV generation applications based on P-U curve reconstitution is proposed. Firstly, the mathematical model of PV array is presented, and then the output dynamic characteristics are analyzed. Based on this, a P-U curve reconstitution strategy is introduced, and the improved MPPT algorithm is proposed. At last, simulation and comparative analysis are conducted. Results show that, with the proposed algorithm, MPP is tracked accurately, and the misjudgment problem is solved effectively.
A rapid, fully non-contact, hybrid system for generating Lamb wave dispersion curves.
Harb, M S; Yuan, F G
2015-08-01
A rapid, fully non-contact, hybrid system which encompasses an air-coupled transducer (ACT) and a laser Doppler vibrometer (LDV) is presented for profiling A0 Lamb wave dispersion of an isotropic aluminum plate. The ACT generates ultrasonic pressure incident upon the surface of the plate. The pressure waves are partially refracted into the plate. The LDV is employed to measure the out-of-plane velocity of the excited Lamb wave mode at some distances where the Lamb waves are formed in the plate. The influence of the ACT angle of incidence on Lamb wave excitation is investigated and Snell's law is used to directly compute Lamb wave dispersion curves including phase and group velocity dispersion curves in aluminum plates from incident angles found to generate optimal A0 Lamb wave mode. The measured curves are compared to results obtained from a two-dimensional (2-D) Fast Fourier transform (FFT), Morlet wavelet transform (MWT) and theoretical predictions. It was concluded that the experimental results obtained using Snell's law concept are well in accordance with the theoretical solutions. The high degree of accuracy in the measured data with the theoretical results proved a high sensitivity of the air-coupled and laser ultrasound in characterizing Lamb wave dispersion in plate-like structures. The proposed non-contact hybrid system can effectively characterize the dispersive relation without knowledge of neither the materials characteristics nor the mathematical model. Copyright © 2015 Elsevier B.V. All rights reserved.
Alt, Nina; Kley, Saskia; Haessig, Michael; Reusch, Claudia E
2007-04-01
To evaluate day-to-day variability in blood glucose curves (BGCs) generated at home and at the clinic for cats with diabetes mellitus. Prospective study. 7 cats with diabetes mellitus. Procedures-BGCs generated at home on 2 consecutive days and within 1 week at the clinic were obtained twice. On each occasion, insulin dose, amount of food, and type of food were consistent for all 3 BGCs. Results of curves generated at home were compared with each other and with the corresponding clinic curve. Differences between blood glucose concentration determined after food was withheld (fasting), nadir concentration, time to nadir concentration, maximum concentration, and mean concentration during 12 hours had high coefficients of variation, as did the difference between fasting blood glucose and nadir concentrations and area under the curve of home curves. Differences between home curve variables were not smaller than those between home and clinic curves, indicating large day-to-day variability in both home and clinic curves. Evaluation of the paired home curves led to the same theoretical recommendation for adjustment of insulin dose on 6 of 14 occasions, and evaluation of home and clinic curves resulted in the same recommendation on 14 of 28 occasions. Four of the 6 paired home curves in cats with good glycemic control and 2 of the 8 paired home curves in cats with poor glycemic control led to the same recommendation. Considerable day-to-day variability was detected in BGCs generated at home. Cats with good glycemic control may have more reproducible curves generated during blood collection at home than cats with poorer control.
A neural network driving curve generation method for the heavy-haul train
Youneng Huang; Litian Tan; Lei Chen; Tao Tang
2016-01-01
The heavy-haul train has a series of characteristics, such as the locomotive traction properties, the longer length of train, and the nonlinear train pipe pressure during train braking. When the train is running on a continuous long and steep downgrade railway line, the safety of the train is ensured by cycle braking, which puts high demands on the driving skills of the driver. In this article, a driving curve generation method for the heavy-haul train based on a neural network is proposed. F...
Spline Trajectory Algorithm Development: Bezier Curve Control Point Generation for UAVs
Howell, Lauren R.; Allen, B. Danette
2016-01-01
A greater need for sophisticated autonomous piloting systems has risen in direct correlation with the ubiquity of Unmanned Aerial Vehicle (UAV) technology. Whether surveying unknown or unexplored areas of the world, collecting scientific data from regions in which humans are typically incapable of entering, locating lost or wanted persons, or delivering emergency supplies, an unmanned vehicle moving in close proximity to people and other vehicles, should fly smoothly and predictably. The mathematical application of spline interpolation can play an important role in autopilots' on-board trajectory planning. Spline interpolation allows for the connection of Three-Dimensional Euclidean Space coordinates through a continuous set of smooth curves. This paper explores the motivation, application, and methodology used to compute the spline control points, which shape the curves in such a way that the autopilot trajectory is able to meet vehicle-dynamics limitations. The spline algorithms developed used to generate these curves supply autopilots with the information necessary to compute vehicle paths through a set of coordinate waypoints.
Learning curve patterns generated by a training method for laparoscopic small bowel anastomosis.
Manuel-Palazuelos, Jose Carlos; Riaño-Molleda, María; Ruiz-Gómez, José Luis; Martín-Parra, Jose Ignacio; Redondo-Figuero, Carlos; Maestre, José María
2016-01-01
The identification of developmental curve patterns generated by a simulation-based educational method and the variables that can accelerate the learning process will result in cost-effective training. This study describes the learning curves of a simulation-based instructional design (ID) that uses ex vivo animal models to teach laparoscopic latero-lateral small bowel anastomosis. Twenty general surgery residents were evaluated on their performance of laparoscopic latero-lateral jejuno-jejunal anastomoses (JJA) and gastro-jejunal anastomoses (GJA), using swine small bowel and stomach on an endotrainer. The ID included the following steps: (1) provision of references and videos demonstrating the surgical technique, (2) creation of an engaging context for learning, (3) critical review of the literature and video on the procedures, (4) demonstration of the critical steps, (5) hands-on practice, (6) in-action instructor's feedback, (7) quality assessment, (8) debriefing at the end of the session, and (9) deliberate and repetitive practice. Time was recorded from the beginning to the completion of the procedure, along with the presence or absence of anastomotic leaks. The participants needed to perform 23.8 ± 6.96 GJA (12-35) and 24.2 ± 6.96 JJA (9-43) to attain proficiency. The starting point of the learning curve was higher for the GJA than for the JJA, although the slope and plateau were parallel. Further, four types of learning curves were identified: (1) exponential, (2) rapid, (3) slow, and (4) no tendency. The type of pattern could be predicted after procedure number 8. These findings may help to identify the learning curve of a trainee early in the developmental process, estimate the number of sessions required to reach a performance goal, determine a trainee's readiness to practice the procedure on patients, and identify the subjects who lack the innate technical abilities. It may help motivated individuals to become reflective and self
International Nuclear Information System (INIS)
Taniguchi, Satoshi; Hirabayashi, Yoko; Inoue, Tohru; Kanisawa, Masayoshi; Sasaki, Hideki; Komatsu, Kenshi; Mori, K.J.
1993-01-01
It has been reported that SCID (severe combined immunodeficiency, scid/scid) mice are more radiosensitive than normal mice. In the present studies, graded doses of radiation were given to bone marrow cells from SCID mice, and double-exponential survival curves were observed for day-9 and day-12 colony-forming units in the spleen (CFU-S). Single-exponential curves were found for SCID CFU in in vitro assays for granulocyte/macrophage-CFUs and erythroid burst-forming units, as reported elsewhere. Since the size of this more resistant fraction seems to decrease with stem-cell maturation, the finding implies that this fraction is a primitive subpopulation of the stem-cell compartment. The mean lethal dose (D 0 ), however, of this less sensitive SCID CFU-S is much less than the D 0 of regular CFU-S in normal littermates. Spleen colonies produced by SCID bone marrow were relatively small and abortive. The size of these colonies decreased nearly exponentially with increasing doses of radiation. These colonies produced by the sensitive fraction have disappeared, being killed by a relatively low dose of radiation. This observation might account for the high lymphomagenesis arising from primitive hemopoietic stem cells in SCID mice, because the smallness of the colonies suggests that there is unrepaired or misrepaired damage. Furthermore, this less sensitive fraction might be a source of the open-quotes leakyclose quotes change of T and B cells, possibly due to the induction of an equivocal repair system which appears in the later stages of life in the SCID mice. 34 refs., 5 figs., 3 tabs
Energy Technology Data Exchange (ETDEWEB)
Barros, Thaisa C. de; Castrillo, Lazara S.; Xavier, Aline G.; Goncalves, Gabriela de L.; Melo, Julio Angelo, E-mail: barros.camara@gmail.com, E-mail: lazaracastrillo@hotmail.com, E-mail: alinegxavier@gmail.com, E-mail: gabilimag_@hotmail.com, E-mail: angelo_mecanic@hotmail.com [Escola Politecnica de Pernambuco (UPE), Recife, PE (Brazil). Departamento de Engenharia Mecanica Industrial
2017-11-01
To meet the demand for electric consumption, it is fundamental to prepare an efficient energy planning that guarantees the safe supply of energy, so that the price of kilowatt-hours for the consumer respects the tariff modality and the socio-environmental impact is the smallest possible. In recent years, alternative sources of energy have been gaining considerable space in the Brazilian generating park. Among the many options for energy supply, choosing the most feasible involves the use of techniques that compare all the costs involved in generating electricity from the sources available in the Brazilian energy matrix. The objective of the work is to show a quick, practical and objective tool that performs this comparison and assists in decision making. The method based on the comparison is the Cost of Energy and the tool for the application of the same are the Screening curves, widely used by the International Atomic Energy Agency (IAEA). In this analysis, the following parameters are considered: operating capacity, toxic gas emission rate, fuel consumption and values, fixed and variable costs of operation and maintenance, investment values for each source, construction time and useful life. It is worth noting that the method does not consider in calculations aspects such as inflation, forced interruptions of the plant and other more specific factors. With the work, it was possible to perform an examination of the costs of the generation technologies available in Brazil and, through the obtained data, the economic viability of the generating parks was discussed through simulations in different scenarios, comparing the sources among themselves. (author)
International Nuclear Information System (INIS)
Barros, Thaisa C. de; Castrillo, Lazara S.; Xavier, Aline G.; Goncalves, Gabriela de L.; Melo, Julio Angelo
2017-01-01
To meet the demand for electric consumption, it is fundamental to prepare an efficient energy planning that guarantees the safe supply of energy, so that the price of kilowatt-hours for the consumer respects the tariff modality and the socio-environmental impact is the smallest possible. In recent years, alternative sources of energy have been gaining considerable space in the Brazilian generating park. Among the many options for energy supply, choosing the most feasible involves the use of techniques that compare all the costs involved in generating electricity from the sources available in the Brazilian energy matrix. The objective of the work is to show a quick, practical and objective tool that performs this comparison and assists in decision making. The method based on the comparison is the Cost of Energy and the tool for the application of the same are the Screening curves, widely used by the International Atomic Energy Agency (IAEA). In this analysis, the following parameters are considered: operating capacity, toxic gas emission rate, fuel consumption and values, fixed and variable costs of operation and maintenance, investment values for each source, construction time and useful life. It is worth noting that the method does not consider in calculations aspects such as inflation, forced interruptions of the plant and other more specific factors. With the work, it was possible to perform an examination of the costs of the generation technologies available in Brazil and, through the obtained data, the economic viability of the generating parks was discussed through simulations in different scenarios, comparing the sources among themselves. (author)
Estimating of a nonlinear power curve for a Wind Turbine Generator
Calif, R.; Schmitt, F. G.
2012-04-01
The output power from a Wind Turbine Generator (WTG) is an intermittent resource, due to the high variability of the atmospheric wind at all spatial or temporal scales ranging from large scale variations to very short variations. Generally, a function transfer or a power curve of WTG is estimated with the IEC standard 61400 - 12 giving a relation of coupling between the measured wind speed and the output power for the considered WTG. However, this relation is a statistical representation and not takes into account the dynamics of the power output, more precisely on small time scales. The goal is to provide a method to estimate and to model the function transfer of a WTG, in order to synthesize the output power mimicking the statistical and the dynamical properties of the real output power. For that, we study the statistics of power curve in the multifractal framework motivated by the presence of spectral scaling for the wind speed and the output power data from a WTG. The first step consists to quantify the power curve or the transfer function of two intermittent stochastic processes such as the wind speed u(t) and the output power p(t) at all temporal scales and at all intensities. In this study, firstly, we define the time increment of the wind speed measurement u'(t) = u(t + τ) - u(t) and the time increment of the output power measurement p'(t) = p(t + τ) - p(t) characterized by mth and nth order structure functions to estimate the exponent functions ζu'(m) and ζp'(n) that characterize respectively the multifractal properties of the wind speed fluctuations u'(t) and the output power fluctuations p'(t) from the WTG. The exponent function ζ defines the types of scaling behavior of a process: if ζ is linear the statistical behavior is monoscaling corresponding to a monofractal process. If ζ is nonlinear and concave, the statistical behavior is multiscaling corresponding to a multifractal process. The concavity of this function is a characteristic of the
International Nuclear Information System (INIS)
Millar, B.C.; Millar, J.L.
1977-01-01
The biradical nitroxyl, Ro.03-6061, sensitized two lines of mouse L cell to ionizing radiation when the cells were rendered hypoxic. Although the biradical reduced the D 0 value of the hypoxic cell-survival curve in each instance, it had no significant effect on the shoulder region. A hybrid line produced from these two strains was more radioresistant than either parent. In this instance, the biradical suppressed the shoulder region of the hypoxic cell-survival curve, but had no effect on the D 0 value. In a second system, the biradical selectivity sensitized hypoxic cells of a diploid and a tetraploid clone of Syrian hamster cells (BHK21/C15). The survival-curve characteristics of both clones were similar. The biradical reduced the D 0 value but did not significantly change the shoulder region of the hypoxic cell-survival curve. An aneuploid line sub-cultured from the tetraploid clone was much more resistant to radiation. In this instance, there was a decrease in the D 0 value of hypoxic cells in the presence of the biradical, but the extrapolation number was increased to a value similar to that for cells irradiated in air. (author)
Treviño, Victor; Tamez-Pena, Jose
2017-06-15
The association of genomic alterations to outcomes in cancer is affected by a problem of unbalanced groups generated by the low frequency of alterations. For this, an R package (VALORATE) that estimates the null distribution and the P -value of the log-rank based on a recent reformulation is presented. For a given number of alterations that define the size of survival groups, the log-rank density is estimated by a weighted sum of conditional distributions depending on a co-occurrence term of mutations and events. The estimations are accurately accelerated by sampling across co-occurrences allowing the analysis of large genomic datasets in few minutes. In conclusion, the proposed VALORATE R package is a valuable tool for survival analysis. The R package is available in CRAN at https://cran.r-project.org and in http://bioinformatica.mty.itesm.mx/valorateR . vtrevino@itesm.mx. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com
Directory of Open Access Journals (Sweden)
Jakub Jurasz
2016-01-01
Full Text Available Polish energy sector is (almost from its origin dominated by fossil fuel feed power. This situation results from an abundance of relatively cheap coal (hard and lignite. Brown coal due to its nature is the cheapest energy source in Poland. However, hard coal which fuels 60% of polish power plants is picking up on prices and is susceptible to the coal imported from neighboring countries. Forced by the European Union (EU regulations, Poland is struggling at achieving its goal of reaching 15% of energy consumption from renewable energy sources (RES by 2020. Over the year 2015, RES covered 11.3% of gross energy consumption but this generation was dominated by solid biomass (over 80%. The aim of this paper was to answer the following research questions: What is the relation of irradiation values to the power load on a yearly and daily basis? and how should photovoltaics (PV be integrated in the polish power system? Conducted analysis allowed us to state that there exists a negative correlation between power demand and irradiation values on a yearly basis, but this is likely to change in the future. Secondly, on average, daily values of irradiation tend to follow power load curve over the first hours of the day.
Kawano, Shingo; Komai, Yoshinobu; Ishioka, Junichiro; Sakai, Yasuyuki; Fuse, Nozomu; Ito, Masaaki; Kihara, Kazunori; Saito, Norio
2016-10-01
The aim of this study was to determine risk factors for survival after retrograde placement of ureteral stents and develop a prognostic model for advanced gastrointestinal tract (GIT: esophagus, stomach, colon and rectum) cancer patients. We examined the clinical records of 122 patients who underwent retrograde placement of a ureteral stent against malignant extrinsic ureteral obstruction. A prediction model for survival after stenting was developed. We compared its clinical usefulness with our previous model based on the results from nephrostomy cases by decision curve analysis. Median follow-up period was 201 days (8-1490) and 97 deaths occurred. The 1-year survival rate in this cohort was 29%. Based on multivariate analysis, primary site of colon origin, absence of retroperitoneal lymph node metastasis and serum albumin >3g/dL were significantly associated with a prolonged survival time. To develop a prognostic model, we divided the patients into 3 risk groups of favorable: 0-1 factors (N.=53), intermediate: 2 risk factors (N.=54), and poor: 3 risk factors (N.=15). There were significant differences in the survival profiles of these 3 risk groups (P<0.0001). Decision curve analyses revealed that the current model has a superior net benefit than our previous model for most of the examined probabilities. We have developed a novel prognostic model for GIT cancer patients who were treated with retrograde placement of a ureteral stent. The current model should help urologists and medical oncologists to predict survival in cases of malignant extrinsic ureteral obstruction.
A gymkhana to discover and generate curves in a cooperative work
Directory of Open Access Journals (Sweden)
Anna Vidal Meló
2014-03-01
Full Text Available The student who access the University understands a curve as a function represented by an equality involving the Cartesian variables x and y. But he does not know another great set of curves such as those described by parametric equations and polar coordinates. We show an experience developed in two consecutive courses in the first course of a bachelor's degree, which allows the students to discover and create many curves in parametric or polar representation, working in group. Also the experience facilitate the students to achieve several generic skills.
International Nuclear Information System (INIS)
Wennberg, Berit M.; Baumann, Pia; Gagliardi, Giovanna
2011-01-01
Background. In SBRT of lung tumours no established relationship between dose-volume parameters and the incidence of lung toxicity is found. The aim of this study is to compare the LQ model and the universal survival curve (USC) to calculate biologically equivalent doses in SBRT to see if this will improve knowledge on this relationship. Material and methods. Toxicity data on radiation pneumonitis grade 2 or more (RP2+) from 57 patients were used, 10.5% were diagnosed with RP2+. The lung DVHs were corrected for fractionation (LQ and USC) and analysed with the Lyman- Kutcher-Burman (LKB) model. In the LQ-correction α/β = 3 Gy was used and the USC parameters used were: α/β = 3 Gy, D 0 = 1.0 Gy, n = 10, α 0.206 Gy-1 and d T = 5.8 Gy. In order to understand the relative contribution of different dose levels to the calculated NTCP the concept of fractional NTCP was used. This might give an insight to the questions of whether 'high doses to small volumes' or 'low doses to large volumes' are most important for lung toxicity. Results and Discussion. NTCP analysis with the LKB-model using parameters m = 0.4, D50 = 30 Gy resulted for the volume dependence parameter (n) with LQ correction n = 0.87 and with USC correction n = 0.71. Using parameters m = 0.3, D 50 = 20 Gy n = 0.93 with LQ correction and n 0.83 with USC correction. In SBRT of lung tumours, NTCP modelling of lung toxicity comparing models (LQ,USC) for fractionation correction, shows that low dose contribute less and high dose more to the NTCP when using the USC-model. Comparing NTCP modelling of SBRT data and data from breast cancer, lung cancer and whole lung irradiation implies that the response of the lung is treatment specific. More data are however needed in order to have a more reliable modelling
Effect of gamma rays on growth and survival of three mustard varieties in M1 generation
International Nuclear Information System (INIS)
Kamala, T.; Rao, R.N.B.
1982-01-01
Effects of gamma radiation on germination, survival percentage, seedling height, leaf length and breadth, and growth rate in three mustard varieties were studied in M 1 generation. Seeds were exposed to 15, 30, 45, 60 and 80 Kr doses for the study. Germinations and survival percentages and seedling height showed dose-dependent decrease, while growth rate, leaf length and breadth increased at 60, 45 and 30 Kr and decreased at 80 Kr, though varietal differences were observed. (M.G.B.)
Czech Academy of Sciences Publication Activity Database
Quan Luna, B.; Blahůt, Jan; van Westen, C.J.; Sterlacchini, S.; van Asch, T.W.J.; Akbas, S.O.
2011-01-01
Roč. 11, č. 7 (2011), s. 2047-2060 ISSN 1561-8633 Institutional research plan: CEZ:AV0Z30460519 Keywords : debris flow modelling * hazard * vulnerability curves Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.983, year: 2011 http://www.nat-hazards-earth-syst-sci.net/11/2047/2011/
Feasible Path Generation Using Bezier Curves for Car-Like Vehicle
Latip, Nor Badariyah Abdul; Omar, Rosli
2017-08-01
When planning a collision-free path for an autonomous vehicle, the main criteria that have to be considered are the shortest distance, lower computation time and completeness, i.e. a path can be found if one exists. Besides that, a feasible path for the autonomous vehicle is also crucial to guarantee that the vehicle can reach the target destination considering its kinematic constraints such as non-holonomic and minimum turning radius. In order to address these constraints, Bezier curves is applied. In this paper, Bezier curves are modeled and simulated using Matlab software and the feasibility of the resulting path is analyzed. Bezier curve is derived from a piece-wise linear pre-planned path. It is found that the Bezier curves has the capability of making the planned path feasible and could be embedded in a path planning algorithm for an autonomous vehicle with kinematic constraints. It is concluded that the length of segments of the pre-planned path have to be greater than a nominal value, derived from the vehicle wheelbase, maximum steering angle and maximum speed to ensure the path for the autonomous car is feasible.
International Nuclear Information System (INIS)
Hong, Sungjun; Chung, Yanghon; Woo, Chungwon
2015-01-01
South Korea, as the 9th largest energy consuming in 2013 and the 7th largest greenhouse gas emitting country in 2011, established ‘Low Carbon Green Growth’ as the national vision in 2008, and is announcing various active energy policies that are set to gain the attention of the world. In this paper, we estimated the decrease of photovoltaic power generation cost in Korea based on the learning curve theory. Photovoltaic energy is one of the leading renewable energy sources, and countries all over the world are currently expanding R and D, demonstration and deployment of photovoltaic technology. In order to estimate the learning rate of photovoltaic energy in Korea, both conventional 1FLC (one-factor learning curve), which considers only the cumulative power generation, and 2FLC, which also considers R and D investment were applied. The 1FLC analysis showed that the cost of power generation decreased by 3.1% as the cumulative power generation doubled. The 2FCL analysis presented that the cost decreases by 2.33% every time the cumulative photovoltaic power generation is doubled and by 5.13% every time R and D investment is doubled. Moreover, the effect of R and D investment on photovoltaic technology took after around 3 years, and the depreciation rate of R and D investment was around 20%. - Highlights: • We analyze the learning effects of photovoltaic energy technology in Korea. • In order to calculate the learning rate, we use 1FLC (one-factor learning curve) and 2FLC methods, respectively. • 1FLC method considers only the cumulative power generation. • 2FLC method considers both cumulative power generation and knowledge stock. • We analyze a variety of scenarios by time lag and depreciation rate of R and D investment
Generation of large-scale PV scenarios using aggregated power curves
DEFF Research Database (Denmark)
Nuño Martinez, Edgar; Cutululis, Nicolaos Antonio
2017-01-01
The contribution of solar photovoltaic (PV) power to the generation is becoming more relevant in modern power system. Therefore, there is a need to model the variability large-scale PV generation accurately. This paper presents a novel methodology to generate regional PV scenarios based on aggreg......The contribution of solar photovoltaic (PV) power to the generation is becoming more relevant in modern power system. Therefore, there is a need to model the variability large-scale PV generation accurately. This paper presents a novel methodology to generate regional PV scenarios based...
International Nuclear Information System (INIS)
Schwachoefer, J.H.C.; Crooijmans, R.P.; van Gasteren, J.J.; Hoogenhout, J.; Jerusalem, C.R.; Kal, H.B.; Theeuwes, A.G.
1989-01-01
Five human tumor cell lines were grown as multicellular tumor spheroids (MTS) to determine whether multicellular tumor spheroids derived from different types of tumors would show tumor-type dependent differences in response to single-dose irradiation, and whether these differences paralleled clinical behavior. Multicellular tumor spheroids of two neuroblastoma, one lung adenocarcinoma, one melanoma, and a squamous cell carcinoma of the oral tongue, were studied in terms of growth delay, calculated cell survival, and spheroid control dose50 (SCD50). Growth delay and cell survival analysis for the tumor cell lines showed sensitivities that correlated well with clinical behavior of the tumor types of origin. Similar to other studies on melanoma multicellular tumor spheroids our spheroid control dose50 results for the melanoma cell line deviated from the general pattern of sensitivity. This might be due to the location of surviving cells, which prohibits proliferation of surviving cells and hence growth of melanoma multicellular tumor spheroids. This study demonstrates that radiosensitivity of human tumor cell lines can be evaluated in terms of growth delay, calculated cell survival, and spheroid control dose50 when grown as multicellular tumor spheroids. The sensitivity established from these evaluations parallels clinical behavior, thus offering a unique tool for the in vitro analysis of human tumor radiosensitivity
Buha Danilo; Buha Boško; Jačić Dušan; Gligorov Saša; Božilov Marko; Marinković Savo; Milosavljević Srđan
2016-01-01
The relay protection settings performed in the largest thermal powerplant (TE "Nikola Tesla B") are reffered and explained in this paper. The first calculation step is related to the coordination of the maximum stator current limiter settings, the overcurrent protection with inverse characteristics settings and the permitted overload of the generator stator B1. In the second calculation step the settings of impedance generator protection are determined, and the methods and criteria according ...
Directory of Open Access Journals (Sweden)
Buha Danilo
2016-01-01
Full Text Available The relay protection settings performed in the largest thermal powerplant (TE "Nikola Tesla B" are reffered and explained in this paper. The first calculation step is related to the coordination of the maximum stator current limiter settings, the overcurrent protection with inverse characteristics settings and the permitted overload of the generator stator B1. In the second calculation step the settings of impedance generator protection are determined, and the methods and criteria according to which the calculations are done are described. Criteria used to provide the protection to fulfill the backup protection role in the event of malfunction of the main protection of the transmission system. are clarified. The calculation of all protection functions (32 functions of generator B1 were performed in the project "Coordination of relay protection blocks B1 and B2 with the system of excitation and power system protections -TENT B".
Directory of Open Access Journals (Sweden)
B. Quan Luna
2011-07-01
Full Text Available For a quantitative assessment of debris flow risk, it is essential to consider not only the hazardous process itself but also to perform an analysis of its consequences. This should include the estimation of the expected monetary losses as the product of the hazard with a given magnitude and the vulnerability of the elements exposed. A quantifiable integrated approach of both hazard and vulnerability is becoming a required practice in risk reduction management. This study aims at developing physical vulnerability curves for debris flows through the use of a dynamic run-out model. Dynamic run-out models for debris flows are able to calculate physical outputs (extension, depths, velocities, impact pressures and to determine the zones where the elements at risk could suffer an impact. These results can then be applied to consequence analyses and risk calculations. On 13 July 2008, after more than two days of intense rainfall, several debris and mud flows were released in the central part of the Valtellina Valley (Lombardy Region, Northern Italy. One of the largest debris flows events occurred in a village called Selvetta. The debris flow event was reconstructed after extensive field work and interviews with local inhabitants and civil protection teams. The Selvetta event was modelled with the FLO-2D program, an Eulerian formulation with a finite differences numerical scheme that requires the specification of an input hydrograph. The internal stresses are isotropic and the basal shear stresses are calculated using a quadratic model. The behaviour and run-out of the flow was reconstructed. The significance of calculated values of the flow depth, velocity, and pressure were investigated in terms of the resulting damage to the affected buildings. The physical damage was quantified for each affected structure within the context of physical vulnerability, which was calculated as the ratio between the monetary loss and the reconstruction value. Three
International Nuclear Information System (INIS)
Hoff, Gabriela; Fischer, Andreia Caroline Fischer da Silveira; Accurso, Andre; Andrade, Jose Rodrigo Mendes; Bacelar, Alexandre
2011-01-01
This paper intended to measure iso expositions curves in areas of mobile equipment use. It was selected: a Shimadzu mobile equipment and two Siemens equipment, being used a non-anthropomorphic scatterer. The exposure measurements in mesh of 4.20 x 4.20 cubic centimeters, at a half-height of the simulator and steps of 30 cm, were used by using the radiographic techniques: 100 k Vp and 63 m As (Shimadzu) and 96 k Vp and 40 m As (Siemens). For estimation of environmental equivalent dose, during 12 months, were considered: 3.55 m As/examination and 44.5 procedures/month (adults): and 3.16 m As/examination and 20.1 procedures/month (pediatrics). It was observed that only the values in the distance of 60 cm presented over the maximum limit of environment equivalent dose defined for Free Area (0.5 mSv/year). The points collected at 2.1 m from the primary beam center, have shown to be always 12% of referred limit, shown to be a safe distance for the hospitalized patients
Wind Turbine Power Curve Design for Optimal Power Generation in Wind Farms Considering Wake Effect
DEFF Research Database (Denmark)
Tian, Jie; Zhou, Dao; Su, Chi
2017-01-01
In modern wind farms, maximum power point tracking (MPPT) is widely implemented. Using the MPPT method, each individual wind turbine is controlled by its pitch angle and tip speed ratio to generate the maximum active power. In a wind farm, the upstream wind turbine may cause power loss to its...... downstream wind turbines due to the wake effect. According to the wake model, downstream power loss is also determined by the pitch angle and tip speed ratio of the upstream wind turbine. By optimizing the pitch angle and tip speed ratio of each wind turbine, the total active power of the wind farm can...... be increased. In this paper, the optimal pitch angle and tip speed ratio are selected for each wind turbine by the exhausted search. Considering the estimation error of the wake model, a solution to implement the optimized pitch angle and tip speed ratio is proposed, which is to generate the optimal control...
International Nuclear Information System (INIS)
Bodez, Veronique
2000-01-01
14 MeV neutrons are used to irradiate human melanoma cells in order to study survival curves at low dose and low dose rate. We have simulated with the MCNP code, transport of neutrons through the experimental setup to evaluate the contamination of the primary beam by gamma and electrons, for the feasibility of our experiments. We have shown a rapid decrease of the survival curve in the first cGy followed by a plateau for doses up to 30 cGy; after we observed an exponential decrease. This results are observed for the first time, for neutrons at low dose rate (5 cGy/h). In parallel with this experimental point, we have developed a simulation code which permitted the study of neutrons interactions with the cellular medium for individual cells defined as in our experimental conditions. We show that most of the energy is deposited by protons from neutron interactions with external medium, and by heavy ions for interactions into the cell. On the other hand the code gives a good order of magnitude of the dose rate, compared to the experimental values given by silicon diodes. The first results show that we can, using a theory based on induced repair of cells, give an interpretation of the observed experimental plateau. We can give an estimation of the radial distribution of dose for the tracks of charged ions, we show the possibility of calculate interaction cross sections with cellular organelles. Such a work gives interesting perspectives for the future in radiobiology, radiotherapy or radioprotection. (author) [fr
Directory of Open Access Journals (Sweden)
Fitnat Saba
2018-03-01
Full Text Available We have investigated a two-dimensional radiative flow of a boundary layer nature. The fluid under consideration is carbon nanotube (CNT-based nanofluid and it flows over a curved surface. The heat transfer through the flow is analyzed under the influence of internal heat generation. Water (base fluid along with single or multi-walled carbon nanotubes is taken to compose the nanofluid. After introducing the suitable similarity variables, the consequent equations are reduced to a system of nonlinear ordinary differential equations. The solution to the system is computed by using the shooting method accompanied by Runge–Kutta–Fehlberg algorithm. Various parameters, emerging in the governing equations, influences the flow and heat transfer distribution. These changes are captured and portrayed in the form of graphs. The changes in local rate of heat transfer and skin friction coefficient are also enlisted. To ensure the correctness of applied numerical scheme, the results are compared with some already existing studies.
Genetic Algorithm-Based Optimization Methodology of Bézier Curves to Generate a DCI Microscale-Model
Directory of Open Access Journals (Sweden)
Jesus A. Basurto-Hurtado
2017-11-01
Full Text Available The aim of this article is to develop a methodology that is capable of generating micro-scale models of Ductile Cast Irons, which have the particular characteristic to preserve the smoothness of the graphite nodules contours that are lost by discretization errors when the contours are extracted using image processing. The proposed methodology uses image processing to extract the graphite nodule contours and a genetic algorithm-based optimization strategy to select the optimal degree of the Bézier curve that best approximate each graphite nodule contour. To validate the proposed methodology, a Finite Element Analysis (FEA was carried out using models that were obtained through three methods: (a using a fixed Bézier degree for all of the graphite nodule contours, (b the present methodology, and (c using a commercial software. The results were compared using the relative error of the equivalent stresses computed by the FEA, where the proposed methodology results were used as a reference. The present paper does not have the aim to define which models are the correct and which are not. However, in this paper, it has been shown that the errors generated in the discretization process should not be ignored when developing geometric models since they can produce relative errors of up to 35.9% when an estimation of the mechanical behavior is carried out.
Survival of adult generated hippocampal neurons is altered in circadian arrhythmic mice.
Directory of Open Access Journals (Sweden)
Brooke D Rakai
Full Text Available The subgranular zone of the hippocampal formation gives rise to new neurons that populate the dentate gyrus throughout life. Cells in the hippocampus exhibit rhythmic clock gene expression and the circadian clock is known to regulate the cycle of cell division in other areas of the body. These facts suggest that the circadian clock may regulate adult neurogenesis in the hippocampus as well. In the present study, neurogenesis in the hippocampal subgranular zone was examined in arrhythmic Bmal1 knockout (-KO mice and their rhythmic heterozygous and wildtype littermates. Proliferation and survival of newly generated subgranular zone cells were examined using bromodeoxyuridine labelling, while pyknosis (a measure of cell death and hippocampal volume were examined in cresyl violet stained sections. There was no significant difference in cellular proliferation between any of the groups, yet survival of proliferating cells, 6 weeks after the bromodeoxyuridine injection, was significantly greater in the BMAL1-KO animals. The number of pyknotic cells was significantly decreased in Bmal1-KO animals, yet hippocampal volume remained the same across genotypes. These findings suggest that while a functional circadian clock is not necessary for normal proliferation of neuronal precursor cells, the normal pruning of newly generated neurons in the hippocampus may require a functional circadian clock.
Huebner, Judith D; Loadman, Nancy L; Wiegand, Murray D; Young, Donna L W; Warszycki, Laura-Anne
2009-01-01
We examined the effects of daily (chronic) exposure to artificial UVB radiation on the survival and reproduction of Daphnia magna over two generations. Control and experimental animals in each generation (parental and F1) were exposed to 16 h of UVA radiation and photosynthetically active radiation daily. In addition, experimental animals were exposed to 6 h of UVB during the middle of the light period. Survival and reproduction were followed for 12 days for each individual. Survival and production of F1 were significantly lower in the UVB exposed parental generation Daphnia than in controls. F1 exposure to UVB significantly decreased F1 survival and reproduction. Reproduction was lowest in UVB exposed F1 animals whose parents were also exposed to UVB. Adverse effects of UVB on offspring production may be magnified in successive generations suggesting that short-term experiments could underestimate the impact of increased UVB exposure on populations.
Liu, Song; Jin, Hua; Song, KeWei; Wang, LiangChen; Wu, Xiang; Wang, LiangBi
2017-10-01
The heat transfer performance of the tube bank fin heat exchanger is limited by the air-side thermal resistance. Thus, enhancing the air-side heat transfer is an effective method to improve the performance of the heat exchanger. A new fin pattern with flow redistributors and curved triangular vortex generators is experimentally studied in this paper. The effects of the flow redistributors located in front of the tube stagnation point and the curved vortex generators located around the tube on the characteristics of heat transfer and pressure drop are discussed in detail. A performance comparison is also carried out between the fins with and without flow redistributors. The experimental results show that the flow redistributors stamped out from the fin in front of the tube stagnation points can decrease the friction factor at the cost of decreasing the heat transfer performance. Whether the combination of the flow redistributors and the curved vortex generators will present a better heat transfer performance depends on the size of the curved vortex generators. As for the studied two sizes of vortex generators, the heat transfer performance is promoted by the flow redistributors for the fin with larger size of vortex generators and the performance is suppressed by the flow redistributors for the fin with smaller vortex generators.
Lagrangian Curves on Spectral Curves of Monopoles
International Nuclear Information System (INIS)
Guilfoyle, Brendan; Khalid, Madeeha; Ramon Mari, Jose J.
2010-01-01
We study Lagrangian points on smooth holomorphic curves in TP 1 equipped with a natural neutral Kaehler structure, and prove that they must form real curves. By virtue of the identification of TP 1 with the space LE 3 of oriented affine lines in Euclidean 3-space, these Lagrangian curves give rise to ruled surfaces in E 3 , which we prove have zero Gauss curvature. Each ruled surface is shown to be the tangent lines to a curve in E 3 , called the edge of regression of the ruled surface. We give an alternative characterization of these curves as the points in E 3 where the number of oriented lines in the complex curve Σ that pass through the point is less than the degree of Σ. We then apply these results to the spectral curves of certain monopoles and construct the ruled surfaces and edges of regression generated by the Lagrangian curves.
International Nuclear Information System (INIS)
Neij, Lena
2008-01-01
Technology foresight studies have become an important tool in identifying realistic ways of reducing the impact of modern energy systems on the climate and the environment. Studies on the future cost development of advanced energy technologies are of special interest. One approach widely adopted for the analysis of future cost is the experience curve approach. The question is, however, how robust this approach is, and which experience curves should be used in energy foresight analysis. This paper presents an analytical framework for the analysis of future cost development of new energy technologies for electricity generation; the analytical framework is based on an assessment of available experience curves, complemented with bottom-up analysis of sources of cost reductions and, for some technologies, judgmental expert assessments of long-term development paths. The results of these three methods agree in most cases, i.e. the cost (price) reductions described by the experience curves match the incremental cost reduction described in the bottom-up analysis and the judgmental expert assessments. For some technologies, the bottom-up analysis confirms large uncertainties in future cost development not captured by the experience curves. Experience curves with a learning rate ranging from 0% to 20% are suggested for the analysis of future cost development
Directory of Open Access Journals (Sweden)
E. Durán
2012-01-01
Full Text Available A versatile measurement system for systematic testing and measurement of the evolution of the I-V characteristic curves of photovoltaic panels or arrays (PV generators is proposed in this paper. The measurement system uses a circuit solution based on DC-DC converters that involves several advantages relative to traditional methods: simple structure, scalability, fast response, and low cost. The measurement of the desired characteristics of PV generators includes high speed of response and high fidelity. The prototype system built is governed by a microcontroller, and experimental results prove the proposed measurement system useful. A virtual instrument (VI was developed for full system control from a computer. The developed system enables monitoring the suitable operation of a PV generator in real time, since it allows comparing its actual curves with those provided by the manufacturer.
Energy Technology Data Exchange (ETDEWEB)
Fynan, Douglas A.; Ahn, Kwang-Il, E-mail: kiahn@kaeri.re.kr
2016-12-15
Highlights: • Pressure drop-flow rate curves for superheated steam in U-tubes were generated. • Forward flow of hot steam is favored in the longer and taller U-tubes. • Reverse flow of cold steam is favored in short U-tubes. • Steam generator U-tube bundle geometry and tube diameter are important. • Need for correlation development for natural convention heat transfer coefficient. - Abstract: Characteristic pressure drop-flow rate curves are generated for all row numbers of the OPR1000 steam generators (SGs), representative of Combustion Engineering (CE) type SGs featuring square bend U-tubes. The pressure drop-flow rate curves are applicable to severe accident natural circulations of single-phase superheated steam during high pressure station blackout sequences with failed auxiliary feedwater and dry secondary side which are closely related to the thermally induced steam generator tube rupture event. The pressure drop-flow rate curves which determine the recirculation rate through the SG tubes are dependent on the tube bundle geometry and hydraulic diameter of the tubes. The larger CE type SGs have greater variation of tube length and height as a function of row number with forward flow of steam favored in the longer and taller high row number tubes and reverse flow favored in the short low row number tubes. Friction loss, natural convection heat transfer coefficients, and temperature differentials from the primary to secondary side are dominant parameters affecting the recirculation rate. The need for correlation development for natural convection heat transfer coefficients for external flow over tube bundles currently not modeled in system codes is discussed.
Simulating Supernova Light Curves
Energy Technology Data Exchange (ETDEWEB)
Even, Wesley Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dolence, Joshua C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2016-05-05
This report discusses supernova light simulations. A brief review of supernovae, basics of supernova light curves, simulation tools used at LANL, and supernova results are included. Further, it happens that many of the same methods used to generate simulated supernova light curves can also be used to model the emission from fireballs generated by explosions in the earth’s atmosphere.
Directory of Open Access Journals (Sweden)
Schäffer Alejandro A
2008-11-01
Full Text Available Abstract Background Fluorescence of dyes bound to double-stranded PCR products has been utilized extensively in various real-time quantitative PCR applications, including post-amplification dissociation curve analysis, or differentiation of amplicon length or sequence composition. Despite the current era of whole-genome sequencing, mapping tools such as radiation hybrid DNA panels remain useful aids for sequence assembly, focused resequencing efforts, and for building physical maps of species that have not yet been sequenced. For placement of specific, individual genes or markers on a map, low-throughput methods remain commonplace. Typically, PCR amplification of DNA from each panel cell line is followed by gel electrophoresis and scoring of each clone for the presence or absence of PCR product. To improve sensitivity and efficiency of radiation hybrid panel analysis in comparison to gel-based methods, we adapted fluorescence-based real-time PCR and dissociation curve analysis for use as a novel scoring method. Results As proof of principle for this dissociation curve method, we generated new maps of river buffalo (Bubalus bubalis chromosome 20 by both dissociation curve analysis and conventional marker scoring. We also obtained sequence data to augment dissociation curve results. Few genes have been previously mapped to buffalo chromosome 20, and sequence detail is limited, so 65 markers were screened from the orthologous chromosome of domestic cattle. Thirty bovine markers (46% were suitable as cross-species markers for dissociation curve analysis in the buffalo radiation hybrid panel under a standard protocol, compared to 25 markers suitable for conventional typing. Computational analysis placed 27 markers on a chromosome map generated by the new method, while the gel-based approach produced only 20 mapped markers. Among 19 markers common to both maps, the marker order on the map was maintained perfectly. Conclusion Dissociation curve
International Nuclear Information System (INIS)
Lott, B.; Escande, L.; Larsson, S.; Ballet, J.
2012-01-01
Here, we present a method enabling the creation of constant-uncertainty/constant-significance light curves with the data of the Fermi-Large Area Telescope (LAT). The adaptive-binning method enables more information to be encapsulated within the light curve than with the fixed-binning method. Although primarily developed for blazar studies, it can be applied to any sources. Furthermore, this method allows the starting and ending times of each interval to be calculated in a simple and quick way during a first step. The reported mean flux and spectral index (assuming the spectrum is a power-law distribution) in the interval are calculated via the standard LAT analysis during a second step. In the absence of major caveats associated with this method Monte-Carlo simulations have been established. We present the performance of this method in determining duty cycles as well as power-density spectra relative to the traditional fixed-binning method.
International Nuclear Information System (INIS)
Doudney, C.O.
1978-01-01
The distinct three-section UV fluence-mutation frequency response (MFR) curve demonstrated in Escherichia coli strain B/r WP2 thy trp and its uvrA derivative supports the SOS hypothesis and suggests that trp + revertants can arise either from isolated lesions (1DM) plus SOS induction or from two lesions in proximity (2DM). Preirradiation growth on arabinose instead of glucose converted the fluence-survival curve from highly shouldered to exponential but did not affect the three-section MFR curve. Prestarvation of the uvrA + strain for typtophan, which drastically increases the expanse of the shoulder of the survival curve, greatly decreased both 1DM and 2DM. With the uvrA strain the increase in shoulder expanse after typtophan prestarvation was accompanied by greatly increased 2DM but no change in 1DM. Preincubation with chloramphenicol induced an even greater increase in 2DM response than amino acid prestarvation. Nalidixic acid, which prevents DNA accumulation, eliminated the response. (Auth.)
DEFF Research Database (Denmark)
Timar-Gabor, Alida; Constantin, Daniela; Buylaert, Jan-Pieter
2015-01-01
SAR-OSL investigations on quartz from Romanian loess resulted in non concordant fine and coarse-grain ages for equivalent doses higher than ~100 Gy. The laboratory dose response for both grain sizes is well represented by a sum of two saturating exponential functions, fine and coarse grains chara...... equivalent dose of 2000e2500 Gy were found to be below the saturation level of the laboratory dose response curve for both grain sizes; this also applied to the luminescence signals measured after >5000 Gy given on top of natural doses. © 2015 Elsevier Ltd. All rights reserved....
Energy Technology Data Exchange (ETDEWEB)
Santos, Adriano M.; Meira-Belo, Luiz C.; Reis, Sergio C.; Grynberg, Suely E., E-mail: amsantos@cdtn.b [Center for Development of Nuclear Technology (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)
2011-07-01
The interstitial brachytherapy is one modality of radiotherapy in which radioactive sources are placed directly in the region to be treated or close to it. The seeds that are used in the treatment of prostate cancer are generally cylindrical radioactive sources, consisting of a ceramic or metal matrix, which acts as the carrier of the radionuclide and as the X-ray marker, encapsulated in a sealed titanium tube. This study aimed to develop a computational model to reproduce the film-seed geometry, in order to obtain the spatial regions of the isodose curves produced by the seed when it is put over the film surface. The seed modeled in this work was the OncoSeed 6711, a sealed source of iodine-125, which its isodose curves were obtained experimentally in previous work with the use of dosimetric films. For the films modeling, compositions and densities of the two types of dosimetric films were used: Agfa Personal Monitoring photographic film 2/10, manufactured by Agfa-Geavaert; and the model EBT radiochromic film, by International Specialty Products. The film-seed models were coupled to the Monte Carlo code MCNP5. The results obtained by simulations showed to be in good agreement with experimental results performed in a previous work. This indicates that the computational model can be used in future studies for other seeds models. (author)
V-I curves and plasma parameters in a high density DC glow discharge generated by a current-source
International Nuclear Information System (INIS)
Granda-Gutierrez, E E; Lopez-Callejas, R; Piedad-Beneitez, A de la; BenItez-Read, J S; Pacheco-Sotelo, J O; Pena-Eguiluz, R; A, R Valencia; Mercado-Cabrera, A; Barocio, S R
2008-01-01
Nitrogen DC glow discharges, conducted in a cylindrical geometry, have been characterized using a new current-source able to provide 10 -3 - 3 A for the sustainment of the discharge, instead of a conventional voltage-source. The V-I characteristic curves obtained from these discharges were found to fit the general form i(v) = A(p)v k(p) , whereby the plasma itself can be modeled as a voltage-controlled current-source. We conclude that the fitting parameters A and k, which mainly depend on the gas pressure p, are strongly related to the plasma characteristics, so much so that they can indicate the pressure interval in which the maximum plasma density is located, with values in the order of 10 16 m -3 at reduced discharge potential (300-600 V) and low working pressure (10 -1 - 10 1 Pa)
International Nuclear Information System (INIS)
Chair, N.
1990-08-01
The generating function that gives rise to the orbifold Euler characteristic of the moduli space of punctured compact Riemann surfaces X(M s g ), g≥0 is derived explicitly. In the derivation, we show that we do not need to use the three-term recursion relation for the orthogonal polynomials. Also the continuum limit of Penner's connected generating function is considered and is shown to be formally equivalent to the free energy obtained recently by Distler and Vafa which exhibits the logarithmic divergences found for genus zero and one in D=1 matrix models. Finally, it is shown that the free energy and its s-derivatives are nothing but the continuum limit of a certain generating function introduced by Harer and Zagier in obtaining the true Euler characteristic with any number of punctures, e(Γ g s ), s≥0. (author). 13 refs
Hurley, Mark A; Hebblewhite, Mark; Gaillard, Jean-Michel; Dray, Stéphane; Taylor, Kyle A; Smith, W K; Zager, Pete; Bonenfant, Christophe
2014-01-01
Large herbivore populations respond strongly to remotely sensed measures of primary productivity. Whereas most studies in seasonal environments have focused on the effects of spring plant phenology on juvenile survival, recent studies demonstrated that autumn nutrition also plays a crucial role. We tested for both direct and indirect (through body mass) effects of spring and autumn phenology on winter survival of 2315 mule deer fawns across a wide range of environmental conditions in Idaho, USA. We first performed a functional analysis that identified spring and autumn as the key periods for structuring the among-population and among-year variation of primary production (approximated from 1 km Advanced Very High Resolution Radiometer Normalized Difference Vegetation Index (NDVI)) along the growing season. A path analysis showed that early winter precipitation and direct and indirect effects of spring and autumn NDVI functional components accounted for 45% of observed variation in overwinter survival. The effect size of autumn phenology on body mass was about twice that of spring phenology, while direct effects of phenology on survival were similar between spring and autumn. We demonstrate that the effects of plant phenology vary across ecosystems, and that in semi-arid systems, autumn may be more important than spring for overwinter survival.
Directory of Open Access Journals (Sweden)
Andrew V. Khokhlov
2016-09-01
Full Text Available The nonlinear Maxwell-type constitutive relation with two arbitrary material functions is formulated for viscoelastoplastic materials and studied analytically in uni-axial case to reveal capabilities of the model and its applicability scope. Its coupling with a number of fracture criteria is analyzed in order to simulate creep rupture under constant and piecewise-constant loading and to compare creep life estimates arising as a result. The limit strain criterion, the critical dissipation criterion and two proposed new families of failure criteria taking into account a strain history (i.e. a whole creep curve are considered. Long-term strength curves equations generated by each one of the four chosen failure criteria are derived. Their general qualitative properties are analyzed and compared to each other under minimal restrictions on material functions of the constitutive relation. It is proved that qualitative properties of all theoretic long-term strength curves coincide with basic properties of typical test long-term strength curves of viscoelastoplastic materials. For every failure criteria considered herein, rapture time under step-wise loading is evaluated for arbitrary material functions and compared to the lifetime yielding from the linear damage accumulation rule (i.e. “Miner’s rule”. General formulas for cumulative damage (“Miner’s sum” deviations from unity are obtained for all failure criteria coupled with the nonlinear Maxwell-type constitutive relation. Their dependences on material functions and loading program parameters are examined. In particular, it is proved that the linear damage rule is exactly valid for the critical dissipation criterion whatever material functions, number of loading steps and stress levels are chosen. On the contrary, for the limit strain criterion, the linear damage rule is never valid for two-step loading and cumulative damage at rapture instant is greater or less than unity depending on the
Directory of Open Access Journals (Sweden)
Paul Bourgine
2014-03-01
By combining the opposite concepts of ‘induced-life’ and ‘inducible-death’, we generated a hMSCs line with defined properties and allowing for temporally controlled survival. The cell line represents a relevant tool for medical discovery in regenerative medicine and a potential means to address availability, standardization and safety requirements in cell & gene therapy. The concept of a hTERT-iCasp9 combination, here explored in the context of hMSCs, could be extended to other types of progenitor/stem cells.
Survival of non-Western first generations immigrants with stomach cancer in North East Netherlands
Siemerink, E.J.M.; van der Aa, M.A.; Siesling, Sabine; Hospers, G.A.P.; Mulder, N.H.
2011-01-01
Background: Isolated groups, such as first generation non-Western immigrants, are at risk for suboptimal utilisation of the health care system resulting in a worse outcome. Methods: From 1989 to 2007, all patients with stomach cancer were selected from the Comprehensive Cancer Centre North-East
White, Laura M.; Lau, Katherine S. L.; Perkins, Anthony; Monahan, Patrick; Grisso, Thomas
2015-01-01
Objectives. We examined the provision of behavioral health services to youths detained in Indiana between 2008 and 2012 and the impact of services on recidivism. Method. We obtained information about behavioral health needs, behavioral health treatment received, and recidivism within 12 months after release for 8363 adolescents (aged 12–18 years; 79.4% male). We conducted survival analyses to determine whether behavioral health services significantly affected time to recidivating. Results. Approximately 19.1% of youths had positive mental health screens, and 25.3% of all youths recidivated within 12 months after release. Of youths with positive screens, 29.2% saw a mental health clinician, 16.1% received behavioral health services during detention, and 30.0% received referrals for postdetention services. Survival analyses showed that being male, Black, and younger, and having higher scores on the substance use or irritability subscales of the screen predicted shorter time to recidivism. Receiving a behavior precaution, behavioral health services in detention, or an assessment in the community also predicted shorter time to recidivating. Conclusions. Findings support previous research showing that behavioral health problems are related to recidivism and that Black males are disproportionately rearrested after detention. PMID:25973804
Eggert, Hendrik; Kurtz, Joachim; Diddens-de Buhr, Maike F
2014-12-22
Paternal trans-generational immune priming, whereby fathers provide immune protection to offspring, has been demonstrated in the red flour beetle Tribolium castaneum exposed to the insect pathogen Bacillus thuringiensis. It is currently unclear how such protection is transferred, as in contrast to mothers, fathers do not directly provide offspring with a large amount of substances. In addition to sperm, male flour beetles transfer seminal fluids in a spermatophore to females during copulation. Depending on whether paternal trans-generational immune priming is mediated by sperm or seminal fluids, it is expected to either affect only the genetic offspring of a male, or also their step offspring that are sired by another male. We therefore conducted a double-mating experiment and found that only the genetic offspring of an immune primed male show enhanced survival upon bacterial challenge, while phenoloxidase activity, an important insect immune trait, and the expression of the immune receptor PGRP were increased in all offspring. This indicates that information leading to enhanced survival upon pathogen exposure is transferred via sperm, and thus potentially constitutes an epigenetic effect, whereas substances transferred with the seminal fluid could have an additional influence on offspring immune traits and immunological alertness.
Generating political priority for newborn survival in three low-income countries.
Smith, Stephanie L; Shiffman, Jeremy; Kazembe, Abigail
2014-01-01
Deaths to babies in their first 28 days of life now account for more than 40% of global under-5 child mortality. High neonatal mortality poses a significant barrier to achieving the child survival Millennium Development Goal. Surmounting the problem requires national-level political commitment, yet only a few nation-states have prioritised this issue. We compare Bolivia, Malawi and Nepal, three low-income countries with high neonatal mortality, with a view to understanding why countries prioritise or neglect the issue. The three have had markedly different trajectories since 2000: attention grew steadily in Nepal, stagnated then grew in Malawi and grew then stagnated in Bolivia. The comparison suggests three implications for proponents seeking to advance attention to neglected health issues in low-income countries: the value of (1) advancing solutions with demonstrated efficacy in low-resource settings, (2) building on existing and emerging national priorities and (3) developing a strong network of domestic and international allies. Such actions help policy communities to weather political storms and take advantage of policy windows.
International Nuclear Information System (INIS)
Moon, B. S.; Han, S. H.; Kim, Y. K.; Chung, C. E.
2001-01-01
The conversion efficiency of a cesium iodine coated micro-channel plate is studied. We use the EGS4 code to transport photons and generated electrons until their energies become less than 1keV and 10keV respectively. Among the generated electrons, the emission from the secondary electrons located within the escape depth of 56mm from the photo-converter boundary is estimated by integrating the product of the secondary electrons with a probability depending only on their geometric locations. The secondary electron emission from the generated electrons of energy higher than 100eV is estimated by the 'universal yield curve'. The sum of these provides an estimate for the secondary electron yield and we show that results of applying this algorithm agree with known experimental results. Using this algorithm, we computed secondary electron emissions from a micro-channel plate used in a gas electron multiplier detector that is currently being developed at Korea Atomic Energy Research Institute
Titration Curves: Fact and Fiction.
Chamberlain, John
1997-01-01
Discusses ways in which datalogging equipment can enable titration curves to be measured accurately and how computing power can be used to predict the shape of curves. Highlights include sources of error, use of spreadsheets to generate titration curves, titration of a weak acid with a strong alkali, dibasic acids, weak acid and weak base, and…
Deepak, Jain; Ashish, Medha; Patil, Neelam; Kadam, Nilam; Yadav, Vandana; Jagdale, Harshal
2015-01-01
Various root canal systems are available commercially with each manufacturer stating superior characteristics of their respective systems. Fifth generation root canal systems claim to have better flexibility and superior debris elimination due to their offset design. This study aims to compare the effects of fifth generation rotary systems on canal curvature, transportation and centering ratio of curved mesial root canals of mandibular molar via cone-beam computed tomographic (CBCT) imaging. A total of 60 mandibular first molars with an angle of curvature ranging from 20 to 40° of the mesiobuccal root were divided into three groups with 20 canals each. Before instrumentation, the groups were balanced with respect to the angle and radius of canal curvature based on CBCT images taken. All root canals were shaped to an apical size of 25: OneShape (OS) (Micro Mega, Besancon, France), ProTaper Next X2 (PTN) (Dentsply Maillefer), Revo S(RS) (Micro Mega, Besancon, France). CBCT assessment was done post instrumentation. SPSS version 16 software was used for statistical analysis. The significance level was set at P = 0.05. The OS system maintained better canal centricity and less transportation as compared to PTN and RS. There was no significant difference among the three groups in canal curvature after instrumentation. All file systems used straightened the root canal curvature similarly. OS instrumentation exhibited superior performance compared with the RS and PTN systems with respect to transportation and centering ratio.
Rauch, Angelika; Reich, Sven; Schierz, Oliver
2017-07-01
The objective of this prospective clinical study was to evaluate the clinical performance of chair-side generated monolithic lithium disilicate crowns after 72 months. Forty-one posterior full contour crowns made of lithium disilicate ceramic were inserted in 34 patients with a chair-side CAD/CAM technique. One crown per patient was randomly selected for evaluation at baseline, 6, 12, 24, 36, 48, 60 and 72 months according to the modified US Public Health Service criteria. After a mean examination time of 73.2 months (SD ± 1.7 months), 25 crowns were available for re-examination. Within the observation period, three failures occurred due to one crown fracture after 2.9 years, an abutment fracture after 6.0 years, and one severe endodontic problem after 6.1 years. One lithium disilicate crown showed a loss of retention after 2 years but could be reinserted. There were two events of caries below the crown margin, one after 24 and another one after 48 months. Both teeth received cervical adhesive composite fillings. Two abutment teeth changed their sensibility perception from positive to negative within the first 13 months. The failure-free rate was 87.6%, and the complication-free rate was 70.1% after 6 years according to the Kaplan-Meier analysis. Due to the fact that there was only one severe technical complication and the severe biological complications were in a normal range, the clinical performance of monolithic lithium disilicate crowns in the posterior region was completely satisfying. The chair-side application of monolithic lithium disilicate crowns can be recommended.
Farrokh, Babak; Segal, Kenneth N.; Akkerman, Michael; Glenn, Ronald L.; Rodini, Benjamin T.; Fan, Wei-Ming; Kellas, Sortiris; Pineda, Evan J.
2014-01-01
In this work, an all-bonded out-of-autoclave (OoA) curved longitudinal composite joint concept, intended for use in the next generation of composite heavy lift launch vehicles, was evaluated and verified through finite element (FE) analysis, fabrication, testing, and post-test inspection. The joint was used to connect two curved, segmented, honeycomb sandwich panels representative of a Space Launch System (SLS) fairing design. The overall size of the resultant panel was 1.37 m by 0.74 m (54 in by 29 in), of which the joint comprised a 10.2 cm (4 in) wide longitudinal strip at the center. NASTRAN and ABAQUS were used to perform linear and non-linear analyses of the buckling and strength performance of the jointed panel. Geometric non-uniformities (i.e., surface contour imperfections) were measured and incorporated into the FE model and analysis. In addition, a sensitivity study of the specimens end condition showed that bonding face-sheet doublers to the panel's end, coupled with some stress relief features at corner-edges, can significantly reduce the stress concentrations near the load application points. Ultimately, the jointed panel was subjected to a compressive load. Load application was interrupted at the onset of buckling (at 356 kN 80 kips). A post-test non-destructive evaluation (NDE) showed that, as designed, buckling occurred without introducing any damage into the panel or the joint. The jointed panel was further capable of tolerating an impact damage to the same buckling load with no evidence of damage propagation. The OoA cured all-composite joint shows promise as a low mass factory joint for segmented barrels.
The Characteristic Curves of Water
Neumaier, Arnold; Deiters, Ulrich K.
2016-09-01
In 1960, E. H. Brown defined a set of characteristic curves (also known as ideal curves) of pure fluids, along which some thermodynamic properties match those of an ideal gas. These curves are used for testing the extrapolation behaviour of equations of state. This work is revisited, and an elegant representation of the first-order characteristic curves as level curves of a master function is proposed. It is shown that Brown's postulate—that these curves are unique and dome-shaped in a double-logarithmic p, T representation—may fail for fluids exhibiting a density anomaly. A careful study of the Amagat curve (Joule inversion curve) generated from the IAPWS-95 reference equation of state for water reveals the existence of an additional branch.
International Nuclear Information System (INIS)
Escande, L.
2012-01-01
The Fermi Gamma-ray Space Telescope was launched on 2008 June 11, carrying the Large Area Telescope (LAT), sensitive to gamma-rays in the 20 MeV - 300 GeV energy range. The data collected since then allowed to multiply by a factor of 10 the number of Active Galactic Nuclei (AGN) detected in the GeV range. Gamma-rays observed in AGNs come from energetic precesses bringing into play very high energy charged particles. These particles are confined in a magnetized plasma jet rising in a region close to the supermassive black hole in the center of the host galaxy. This jet moves away with velocities as high as 0.9999 c, forming in many cases radio lobes on kilo-parsec or even mega-parsec scales. Among the AGNs, those whose jet inclination angle to the line of sight is small are called blazars. The combination of this small inclination angle with relativistic ejection speeds led to relativistic effects: apparent superluminal motions, amplification of the luminosity and modification of the time scales. Blazars are characterized by extreme variability at all wavelengths, on time scales from a few minutes to several months. A temporal and spectral study of the most luminous of those detected by the LAT, 3C 454.3, was done so as to constrain emission models. A new method for generating adaptive-binning light curves is also suggested in this thesis. It allows to extract the maximum of information from the LAT data whatever the flux state of the source. (author)
DEFF Research Database (Denmark)
von Plessen, C; Strand, T-E; Wentzel-Larsen, T
2008-01-01
BACKGROUND: To investigate whether the introduction of modern third-generation chemotherapy was associated with survival benefits in a national population of patients with advanced non-small cell lung cancer (ANSCLC) and to explore geographical and temporary variations in the utilisation of chemo...
Dufour, R; Winzenrieth, R; Heraud, A; Hans, D; Mehsen, N
2013-11-01
Age-related changes in lumbar vertebral microarchitecture are evaluated, as assessed by trabecular bone score (TBS), in a cohort of 5,942 French women. The magnitude of TBS decline between 45 and 85 years of age is piecewise linear in the spine and averaged 14.5%. TBS decline rate increases after 65 years by 50%. This study aimed to evaluate age-related changes in lumbar vertebral microarchitecture, as assessed by TBS, in a cohort of French women aged 45-85 years. An all-comers cohort of French Caucasian women was selected from two clinical centers. Data obtained from these centers were cross-calibrated for TBS and bone mineral density (BMD). BMD and TBS were evaluated at L1-L4 and for all lumbar vertebrae combined using GE-Lunar Prodigy densitometer images. Weight, height, and body mass index (BMI) also were determined. To validate our all-comers cohort, the BMD normative data of our cohort and French Prodigy data were compared. A cohort of 5,942 French women aged 45 to 85 years was created. Dual-energy X-ray absorptiometry normative data obtained for BMD from this cohort were not significantly different from French prodigy normative data (p = 0.15). TBS values at L1-L4 were poorly correlated with BMI (r = -0.17) and weight (r = -0.14) and not correlated with height. TBS values obtained for all lumbar vertebra combined (L1, L2, L3, L4) decreased with age. The magnitude of TBS decline at L1-L4 between 45 and 85 years of age was piecewise linear in the spine and averaged 14.5%, but this rate increased after 65 years by 50%. Similar results were obtained for other region of interest in the lumbar spine. As opposed to BMD, TBS was not affected by spinal osteoarthrosis. The age-specific reference curve for TBS generated here could therefore be used to help clinicians to improve osteoporosis patient management and to monitor microarchitectural changes related to treatment or other diseases in routine clinical practice.
International Nuclear Information System (INIS)
Bourrachot, Stéphanie; Brion, François; Pereira, Sandrine; Floriani, Magali; Camilleri, Virginie; Cavalié, Isabelle; Palluel, Olivier; Adam-Guillermin, Christelle
2014-01-01
Highlights: • The effect of depleted uranium on zebrafish reproduction was studied. • An inhibition of egg production and an increase of F1 embryo mortality were observed. • Decreased circulating concentration of vitellogenin was observed in females. • Increased DNA damages were observed in parent gonads and in embryos. • U environmental concentration impairs reproduction and genetic integrity of fish. - Abstract: Despite the well-characterized occurrence of uranium (U) in the aquatic environment, very little is known about the chronic exposure of fish to low levels of U and its potential effect on reproduction. Therefore, this study was undertaken to investigate the effects of environmental concentrations of depleted U on the reproductive output of zebrafish (Danio rerio) and on survival and development of the F1 embryo-larvae following parental exposure to U. For that purpose, sexually mature male and female zebrafish were exposed to 20 and 250 μg/L of U for 14 days and allowed to reproduce in clean water during a further 14-day period. At all sampling times, whole-body vitellogenin concentrations and gonad histology were analyzed to investigate the effects of U exposure on these reproductive endpoints. In addition, accumulation of U in the gonads and its genotoxic effect on male and female gonad cells were quantified. The results showed that U strongly affected the capability of fish to reproduce and to generate viable individuals as evidenced by the inhibition of egg production and the increased rate of mortality of the F1 embryos. Interestingly, U exposure resulted in decreased circulating concentrations of vitellogenin in females. Increased concentrations of U were observed in gonads and eggs, which were most likely responsible for the genotoxic effects seen in fish gonads and in embryos exposed maternally to U. Altogether, these findings highlight the negative effect of environmentally relevant concentrations of U which alter the reproductive
Energy Technology Data Exchange (ETDEWEB)
Bourrachot, Stéphanie [Institut de Radioprotection et de Sûreté Nucléaire (IRSN), PRP-ENV/SERIS/LECO, Cadarache, Saint-Paul-lez-Durance 13115 (France); Brion, François [Institut National de l’Environnement Industriel et des Risques (INERIS), Unité d’évaluation des risques écotoxicologiques, BP2, 60550 Verneuil-en-Halatte (France); Pereira, Sandrine; Floriani, Magali; Camilleri, Virginie; Cavalié, Isabelle [Institut de Radioprotection et de Sûreté Nucléaire (IRSN), PRP-ENV/SERIS/LECO, Cadarache, Saint-Paul-lez-Durance 13115 (France); Palluel, Olivier [Institut National de l’Environnement Industriel et des Risques (INERIS), Unité d’évaluation des risques écotoxicologiques, BP2, 60550 Verneuil-en-Halatte (France); Adam-Guillermin, Christelle, E-mail: christelle.adam-guillermin@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire (IRSN), PRP-ENV/SERIS/LECO, Cadarache, Saint-Paul-lez-Durance 13115 (France)
2014-09-15
Highlights: • The effect of depleted uranium on zebrafish reproduction was studied. • An inhibition of egg production and an increase of F1 embryo mortality were observed. • Decreased circulating concentration of vitellogenin was observed in females. • Increased DNA damages were observed in parent gonads and in embryos. • U environmental concentration impairs reproduction and genetic integrity of fish. - Abstract: Despite the well-characterized occurrence of uranium (U) in the aquatic environment, very little is known about the chronic exposure of fish to low levels of U and its potential effect on reproduction. Therefore, this study was undertaken to investigate the effects of environmental concentrations of depleted U on the reproductive output of zebrafish (Danio rerio) and on survival and development of the F1 embryo-larvae following parental exposure to U. For that purpose, sexually mature male and female zebrafish were exposed to 20 and 250 μg/L of U for 14 days and allowed to reproduce in clean water during a further 14-day period. At all sampling times, whole-body vitellogenin concentrations and gonad histology were analyzed to investigate the effects of U exposure on these reproductive endpoints. In addition, accumulation of U in the gonads and its genotoxic effect on male and female gonad cells were quantified. The results showed that U strongly affected the capability of fish to reproduce and to generate viable individuals as evidenced by the inhibition of egg production and the increased rate of mortality of the F1 embryos. Interestingly, U exposure resulted in decreased circulating concentrations of vitellogenin in females. Increased concentrations of U were observed in gonads and eggs, which were most likely responsible for the genotoxic effects seen in fish gonads and in embryos exposed maternally to U. Altogether, these findings highlight the negative effect of environmentally relevant concentrations of U which alter the reproductive
YANG, CHANG; HU, DONG-HUI; FENG, YAN
2015-01-01
The aim of the present study was to investigate the chemical composition of the essential oil of Artemisia vestita and to determine the antibacterial activity of the essential oil and its two major components, grandisol and 1,8-cineole, against certain respiratory infection-causing bacterial strains, in vitro and in vivo. The chemical composition of the essential oil was analyzed using gas chromatography-mass spectrometry. A micro-well dilution method was used to determine the minimum inhibition concentration (MIC) values of the essential oil and its major constituents. A model of Streptococcus pyogenes infection in mice was used to determine its in vivo activities. Lung and blood samples were obtained to assess bacterial cell counts. Toxicity evaluation of the essential oil and its components was completed by performing biochemical analysis of the serum, particularly monitoring aspartate transaminase, alanine transaminase, urea and creatinine. The essential oil exhibited potent antibacterial activity, whereas the two major constituents were less potent. The essential oil exhibited MIC values between 20 and 80 μg/ml, while the values of the two constituents were between 130 and 200 μg/ml. Scanning electron microscopy results demonstrated that the essential oil inhibited biofilm formation and altered its architecture. Survival curves indicated that the essential oil led to a reduction in the viability of different bacteria. The essential oil also induced significant leakage of potassium ions from S. pyogenes. The essential oil (100 μg/mouse) and grandisol (135 μg/mouse) significantly reduced the number of viable bacterial cells in the lungs (Pessential oil or grandisol 135 μg/mouse once or twice each day for 9 days did not produce any toxic effects in the mice. In conclusion, the in vitro and in vivo results suggested that the essential oil of A. vestita and one of its major constituents, grandisol, can significantly inhibit the growth of different bacterial
Intersection numbers of spectral curves
Eynard, B
2011-01-01
We compute the symplectic invariants of an arbitrary spectral curve with only 1 branchpoint in terms of integrals of characteristic classes in the moduli space of curves. Our formula associates to any spectral curve, a characteristic class, which is determined by the laplace transform of the spectral curve. This is a hint to the key role of Laplace transform in mirror symmetry. When the spectral curve is y=\\sqrt{x}, the formula gives Kontsevich--Witten intersection numbers, when the spectral curve is chosen to be the Lambert function \\exp{x}=y\\exp{-y}, the formula gives the ELSV formula for Hurwitz numbers, and when one chooses the mirror of C^3 with framing f, i.e. \\exp{-x}=\\exp{-yf}(1-\\exp{-y}), the formula gives the topological vertex formula, i.e. the generating function of Gromov-Witten invariants of C^3. In some sense this formula generalizes ELSV formula, and Mumford formula.
Directory of Open Access Journals (Sweden)
Deborah D Crane
Full Text Available Francisella tularensis is a facultative intracellular bacterium and the causative agent of tularemia. Development of novel vaccines and therapeutics for tularemia has been hampered by the lack of understanding of which immune components are required to survive infection. Defining these requirements for protection against virulent F. tularensis, such as strain SchuS4, has been difficult since experimentally infected animals typically die within 5 days after exposure to as few as 10 bacteria. Such a short mean time to death typically precludes development, and therefore assessment, of immune responses directed against virulent F. tularensis. To enable identification of the components of the immune system that are required for survival of virulent F. tularensis, we developed a convalescent model of tularemia in C57Bl/6 mice using low dose antibiotic therapy in which the host immune response is ultimately responsible for clearance of the bacterium. Using this model we demonstrate αβTCR(+ cells, γδTCR(+ cells, and B cells are necessary to survive primary SchuS4 infection. Analysis of mice deficient in specific soluble mediators shows that IL-12p40 and IL-12p35 are essential for survival of SchuS4 infection. We also show that IFN-γ is required for survival of SchuS4 infection since mice lacking IFN-γR succumb to disease during the course of antibiotic therapy. Finally, we found that both CD4(+ and CD8(+ cells are the primary producers of IFN-γand that γδTCR(+ cells and NK cells make a minimal contribution toward production of this cytokine throughout infection. Together these data provide a novel model that identifies key cells and cytokines required for survival or exacerbation of infection with virulent F. tularensis and provides evidence that this model will be a useful tool for better understanding the dynamics of tularemia infection.
International Nuclear Information System (INIS)
Kim, Y; Waldron, T; Pennington, E
2016-01-01
Purpose: To test the radiobiological impact of hypofractionated choroidal melanoma brachytherapy, we calculated single fraction equivalent doses (SFED) of the tumor that equivalent to 85 Gy of I125-BT for 20 patients. Corresponding organs-at-risks (OARs) doses were estimated. Methods: Twenty patients treated with I125-BT were retrospectively examined. The tumor SFED values were calculated from tumor BED using a conventional linear-quadratic (L-Q) model and an universal survival curve (USC). The opposite retina (α/β = 2.58), macula (2.58), optic disc (1.75), and lens (1.2) were examined. The % doses of OARs over tumor doses were assumed to be the same as for a single fraction delivery. The OAR SFED values were converted into BED and equivalent dose in 2 Gy fraction (EQD2) by using both L-Q and USC models, then compared to I125-BT. Results: The USC-based BED and EQD2 doses of the macula, optic disc, and the lens were on average 118 ± 46% (p < 0.0527), 126 ± 43% (p < 0.0354), and 112 ± 32% (p < 0.0265) higher than those of I125-BT, respectively. The BED and EQD2 doses of the opposite retina were 52 ± 9% lower than I125-BT. The tumor SFED values were 25.2 ± 3.3 Gy and 29.1 ± 2.5 Gy when using USC and LQ models which can be delivered within 1 hour. All BED and EQD2 values using L-Q model were significantly larger when compared to the USC model (p < 0.0274) due to its large single fraction size (> 14 Gy). Conclusion: The estimated single fraction doses were feasible to be delivered within 1 hour using a high dose rate source such as electronic brachytherapy (eBT). However, the estimated OAR doses using eBT were 112 ∼ 118% higher than when using the I125-BT technique. Continued exploration of alternative dose rate or fractionation schedules should be followed.
Energy Technology Data Exchange (ETDEWEB)
Kim, Y; Waldron, T; Pennington, E [University Of Iowa, College of Medicine, Iowa City, IA (United States)
2016-06-15
Purpose: To test the radiobiological impact of hypofractionated choroidal melanoma brachytherapy, we calculated single fraction equivalent doses (SFED) of the tumor that equivalent to 85 Gy of I125-BT for 20 patients. Corresponding organs-at-risks (OARs) doses were estimated. Methods: Twenty patients treated with I125-BT were retrospectively examined. The tumor SFED values were calculated from tumor BED using a conventional linear-quadratic (L-Q) model and an universal survival curve (USC). The opposite retina (α/β = 2.58), macula (2.58), optic disc (1.75), and lens (1.2) were examined. The % doses of OARs over tumor doses were assumed to be the same as for a single fraction delivery. The OAR SFED values were converted into BED and equivalent dose in 2 Gy fraction (EQD2) by using both L-Q and USC models, then compared to I125-BT. Results: The USC-based BED and EQD2 doses of the macula, optic disc, and the lens were on average 118 ± 46% (p < 0.0527), 126 ± 43% (p < 0.0354), and 112 ± 32% (p < 0.0265) higher than those of I125-BT, respectively. The BED and EQD2 doses of the opposite retina were 52 ± 9% lower than I125-BT. The tumor SFED values were 25.2 ± 3.3 Gy and 29.1 ± 2.5 Gy when using USC and LQ models which can be delivered within 1 hour. All BED and EQD2 values using L-Q model were significantly larger when compared to the USC model (p < 0.0274) due to its large single fraction size (> 14 Gy). Conclusion: The estimated single fraction doses were feasible to be delivered within 1 hour using a high dose rate source such as electronic brachytherapy (eBT). However, the estimated OAR doses using eBT were 112 ∼ 118% higher than when using the I125-BT technique. Continued exploration of alternative dose rate or fractionation schedules should be followed.
Curves from Motion, Motion from Curves
2000-01-01
tautochrone and brachistochrone properties. To Descartes, however, the rectification of curves such as the spiral (3) and the cycloid (4) was suspect - they...UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADP012017 TITLE: Curves from Motion, Motion from Curves DISTRIBUTION...Approved for public release, distribution unlimited This paper is part of the following report: TITLE: International Conference on Curves and Surfaces [4th
Cubic spline functions for curve fitting
Young, J. D.
1972-01-01
FORTRAN cubic spline routine mathematically fits curve through given ordered set of points so that fitted curve nearly approximates curve generated by passing infinite thin spline through set of points. Generalized formulation includes trigonometric, hyperbolic, and damped cubic spline fits of third order.
Automated Blazar Light Curves Using Machine Learning
Energy Technology Data Exchange (ETDEWEB)
Johnson, Spencer James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2017-07-27
This presentation describes a problem and methodology pertaining to automated blazar light curves. Namely, optical variability patterns for blazars require the construction of light curves and in order to generate the light curves, data must be filtered before processing to ensure quality.
CYCLING CURVES AND THEIR APPLICATIONS
Directory of Open Access Journals (Sweden)
RAICU Lucian
2015-06-01
Full Text Available This paper proposes an analysis of the cyclic curves that can be considered as some of the most important regarding their applications in science, technique, design, architecture and art. These curves include the following: cycloid, epicycloid, hypocycloid, spherical cycloid and special cases thereof. In the first part of the paper the main curves of cycloids family are presented with their methods of generating and setting parametric equations. In the last part some of cycloid applications are highlighted in different areas of science, technology and art.
Learning curve for fetoscopic laser surgery using cumulative sum analysis.
Peeters, Suzanne H P; Van Zwet, Erik W; Oepkes, Dick; Lopriore, Enrico; Klumper, Frans J; Middeldorp, Johanna M
2014-07-01
To identify a learning curve and monitor operator performance for fetoscopic laser surgery for twin-to-twin transfusion syndrome using cumulative sum analysis. Retrospective cohort study. National tertiary referral center for invasive fetal therapy. A total of 340 consecutive monochorionic pregnancies with twin-to-twin transfusion syndrome treated with fetoscopic laser coagulation between August 2000 and December 2010. A learning curve was generated using learning curve cumulative sum analysis and cumulative sum methodology to assess changes in double survival across the case sequence. Laser surgery was initially performed by two operators, joined by a third and fourth operator after 1 and 2 years, respectively. Individual operator performance, double perinatal survival at 4 weeks. Overall survival of both twins occurred in 59% (201/340), median gestational age at birth was 32.0 weeks. Cumulative sum graphs showed that level of competence for double survival for the operators was reached after 26, 25, 26, and 35 procedures, respectively. Two operators kept their competence level and continued to improve after completing the initial learning process; two others went out of control at one point in time, according to the cumulative sum boundaries. A difference in learning effect was associated with number of procedures performed annually and previous experience with other ultrasound-guided invasive procedures. This study shows that all operators reached a level of competence after at least 25 fetoscopic laser procedures and confirms the value of using the cumulative sum method both for learning curve assessment and for ongoing quality control. © 2014 Nordic Federation of Societies of Obstetrics and Gynecology.
Martin, Georgianna LaNelle
2012-01-01
The purpose of this study was to understand how White students from low socioeconomic status backgrounds (operationalized as students who are both low income and of the first generation in their family to attend college) experience and navigate social class during college. This was a qualitative research study employing a phenomenological research…
Directory of Open Access Journals (Sweden)
Jungwoo Shin
2018-02-01
Full Text Available Introduced autonomous and connected vehicles equipped with emerging technologies are expected to change the automotive market. In this study, using stated preference (SP data collected from choice experiments conducted in Korea with a mixed multiple discrete-continuous extreme value model (MDCEV, we analyzed how the advent of next-generation of vehicles with advanced vehicle technologies would affect consumer vehicle choices and usage patterns. Additionally, ex-ante market simulations and market segmentation analyses were conducted to provide specific management strategies for next-generation vehicles. The results showed that consumer preference structures of conventional and alternative fuel types primarily differed depending on whether they were drivers or non-drivers. Additionally, although the introduction of electric vehicles to the automobile market is expected to negatively affect the choice probability and mileage of other vehicles, it could have a positive influence on the probability of purchasing an existing conventional vehicle if advanced vehicle technologies are available.
Multiphasic growth curve analysis.
Koops, W.J.
1986-01-01
Application of a multiphasic growth curve is demonstrated with 4 data sets, adopted from literature. The growth curve used is a summation of n logistic growth functions. Human height growth curves of this type are known as "double logistic" (n = 2) and "triple logistic" (n = 3) growth curves (Bock
Buist, Thomas J; Adiyaman, Ahmet; Smit, Jaap Jan J; Ramdat Misier, Anand R; Elvan, Arif
2018-02-06
The aim of this study was to compare second-generation cryoballoon and contact-force radiofrequency point-by-point pulmonary vein isolation (PVI) in atrial fibrillation (AF) patients with regard to pulmonary vein reconnection and arrhythmia-free survival. Altogether, 269 consecutive patients with drug-refractory AF undergoing PVI were included and randomly allocated to second-generation cryoballoon or contact-force point-by-point radiofrequency ablation. Median follow-up duration was 389 days (interquartile range 219-599). Mean age was 59 years (71% male); 136 patients underwent cryoballoon and 133 patients underwent radiofrequency ablation. Acute electrical PVI was 100% for both techniques. Procedure duration was significantly shorter in cryoballoon vs radiofrequency (166.5 vs 184.13 min P = 0.016). Complication rates were similar (6.0 vs 6.7%, P = 1.00). Single procedure freedom of atrial arrhythmias was significantly higher in cryoballoon as compared to radiofrequency (75.2 vs 57.4%, P = 0.013). In multivariate analysis, persistent AF, AF duration, and cryoballoon ablation were associated with freedom of atrial tachyarrhythmias. The number of repeat ablation procedures was significantly lower in the cryoballoon compared to radiofrequency (15.0 vs 24.3%, P = 0.045). At repeat ablation, pulmonary vein reconnection rate was significantly lower after cryoballoon as compared to radiofrequency ablation (36.8 vs 58.1%, P = 0.003). Improved arrhythmia-free survival and more durable pulmonary vein isolation is seen after PVI using second-generation cryoballoon as compared to contact-force radiofrequency, in patients with drug-refractory paroxysmal AF. Complication rates for both ablation techniques are low.
Directory of Open Access Journals (Sweden)
Uchiyama Masateru
2012-03-01
Full Text Available Abstract Background Interactions between the immune response and brain functions such as olfactory, auditory, and visual sensations are likely. This study investigated the effect of sounds on alloimmune responses in a murine model of cardiac allograft transplantation. Methods Naïve CBA mice (H2k underwent transplantation of a C57BL/6 (B6, H2b heart and were exposed to one of three types of music--opera (La Traviata, classical (Mozart, and New Age (Enya--or one of six different single sound frequencies, for 7 days. Additionally, we prepared two groups of CBA recipients with tympanic membrane perforation exposed to opera for 7 days and CBA recipients exposed to opera for 7 days before transplantation (pre-treatment. An adoptive transfer study was performed to determine whether regulatory cells were generated in allograft recipients. Immunohistochemical, cell-proliferation, cytokine, and flow cytometry assessments were also performed. Results CBA recipients of a B6 cardiac graft that were exposed to opera music and Mozart had significantly prolonged allograft survival (median survival times [MSTs], 26.5 and 20 days, respectively, whereas those exposed to a single sound frequency (100, 500, 1000, 5000, 10,000, or 20,000 Hz or Enya did not (MSTs, 7.5, 8, 9, 8, 7.5, 8.5 and 11 days, respectively. Untreated, CBA mice with tympanic membrane perforations and CBA recipients exposed to opera for 7 days before transplantation (pre-treatment rejected B6 cardiac grafts acutely (MSTs, 7, 8 and 8 days, respectively. Adoptive transfer of whole splenocytes, CD4+ cells, or CD4+CD25+ cells from opera-exposed primary allograft recipients resulted in significantly prolonged allograft survival in naive secondary recipients (MSTs, 36, 68, and > 100 days, respectively. Proliferation of splenocytes, interleukin (IL-2 and interferon (IFN-γ production was suppressed in opera-exposed mice, and production of IL-4 and IL-10 from opera-exposed transplant recipients increased
Indian Academy of Sciences (India)
The cause-effect relationship for a wide variety of biologi- cal processes from molecular to ecosystem levels can be described by a curvilinear function called the rectangular hyperbola. Although a simple algebraic equation adequately describes this curve, biological models have generated different equations incorporating ...
Power forward curves: a managerial perspective
International Nuclear Information System (INIS)
Nagarajan, Shankar
1999-01-01
This chapter concentrates on managerial application of power forward curves, and examines the determinants of electricity prices such as transmission constraints, its inability to be stored in a conventional way, its seasonality and weather dependence, the generation stack, and the swing risk. The electricity forward curve, classical arbitrage, constructing a forward curve, volatilities, and electricity forward curve models such as the jump-diffusion model, the mean-reverting heteroscedastic volatility model, and an econometric model of forward prices are examined. A managerial perspective of the applications of the forward curve is presented covering plant valuation, capital budgeting, performance measurement, product pricing and structuring, asset optimisation, valuation of transmission options, and risk management
Zhong, Weijie; Xu, Xin; Zhu, Zhigang; Du, Qinghua; Du, Hong; Yang, Li; Ling, Yanying; Xiong, Huabao; Li, Qingshan
2017-07-25
The immunological pathogenesis of diffuse large B cell lymphoma (DLBCL) remains elusive. Searching for new prognostic markers of DLBCL is a crucial focal point for clinical scientists. The aim of the present study was to examine the prognostic value of interferon regulatory factor 8 (IRF8) expression and its effect on the development of Th17 cells in the tumor microenvironment of DLBCL patients. Flow cytometry, immunohistochemistry, and quantitative real-time PCR were used to detect the distribution of Th17 cells and related cytokines and IRF8 in tumor tissues from DLBCL patients. Two DLBCL cell lines (OCI-LY10 and OCI-LY1) with IRF8 knockdown or overexpression and two human B lymphoblast cell lines were co-cultured with peripheral blood mononuclear cells (PBMCs) in vitro to determine the effect of IRF8 on the generation of Th17 cells. Quantitative real-time PCR and Western blotting were used to investigate the involvement of retinoic acid receptor-related orphan receptor gamma t (RORγt) in the effect of IRF8 on Th17 cell generation. The survival of 67 DLBCL patients was estimated using the Kaplan-Meier method and log-rank analysis. The percentage of Th17 cells was lower in DLBCL tumor tissues than in PBMCs and corresponding adjacent benign tissues. Relative expression of interleukin (IL)-17A was lower, whereas that of interferon (IFN)-γ was higher in tumor tissues than in benign tissues. Co-culture with DLBCL cell lines inhibited the generation of Th17 cells in vitro. IRF8 upregulation was detected in DLBCL tumor tissues, and it was associated with decreased DLBCL patient survival. Investigation of the underlying mechanism suggested that IRF8 upregulation in DLBCL, through an unknown mechanism, inhibited Th17 cell generation by suppressing RORγt in neighboring CD4+ T cells. Tumor cells may express soluble or membrane-bound factors that inhibit the expression of RORγt in T cells within the tumor microenvironment. Our findings suggest that IRF8 expression could
Electro-Mechanical Resonance Curves
Greenslade, Thomas B.
2018-03-01
Recently I have been investigating the frequency response of galvanometers. These are direct-current devices used to measure small currents. By using a low-frequency function generator to supply the alternating-current signal and a stopwatch smartphone app to measure the period, I was able to take data to allow a resonance curve to be drawn. This is the sort of project that should provide a fascinating research experience for the introductory physics student. In this article I will discuss the galvanometers that I used in this work, and will show a resonance curve for one of them.
Directory of Open Access Journals (Sweden)
Janusz Charatonik
1991-11-01
Full Text Available Results concerning contractibility of curves (equivalently: of dendroids are collected and discussed in the paper. Interrelations tetween various conditions which are either sufficient or necessary for a curve to be contractible are studied.
Indian Academy of Sciences (India)
In this article some Peano curves are exhibited and some of their recent applications are dis- cussed. A C++ program to draw the Hilbert curve approximately is given. 1. Introduction. A 'continuous curve' in the plane is usually defined as the path traced by a moving point (x (t), Y (t)) as t runs over an interval of the real line, ...
Indian Academy of Sciences (India)
Institute, Calcutta. Apart from mathematics, he likes painting and reading. Unlike most others he dislikes computers. Ritabrata Munshi. Introduction. In this two-part article we will consider one of the classi- cal theorems of mathematics, the Jordan curve theorem. It states that a simple closed curve (i.e., a closed curve which.
Matsumoto, Toru; Fukuda, Nobuo; Furukawa, Akira; Suwa, Koji; Wada, Shinichi; Matsumoto, Mitsuomi; Sone, Shusuke
2006-03-01
When physicians inspect an image, they make up a certain degree of confidence that the image are abnormal; p(t), or normal; n(t)[n(t)=1-p(t)]. After infinite time of the inspection, they reach the equilibrium levels of the confidence of p*=p(∞) and n*=n(∞). There are psychological conflicts between the decisions of normal and abnormal. We assume that the decision of "normal" is distracted by the decision of "abnormal" by a factor of k(1 + ap), and in an inverse direction by a factor of k(1 + bn), where k ( > 0) is a parameter that relates with image quality and skill of the physicians, and a and b are unknown constants. After the infinite time of inspection, the conflict reaches the equilibrium, which satisfies the equation, k(1 + ap*)n* = k(1 + bn*)p*. Here we define a parameter C, which is 2p*/[p*(1 - p*)]. After the infinite time of inspection, the conflict reaches the equilibrium, which satisfies t that changes in the confidence level with the time (dp/dt) is proportional to [k(1+ap)n - k(1+bn)p], i.e. k[-cp2 + (c - 2)p + 1]. Solving the differential equation, we derived the equation; t(p) and p(t) depending with the parameters; k, c, S. S (0-1) is the value arbitrary selected and related with probability of "abnormal" before the image inspection (S = p(0)). Image reading studies were executed for CT images. ROC curves were generated both by the traditional 4-step score-based method and by the confidence level; p estimated from the equation t(p) of the DDC model using observed judgment time. It was concluded that ROC curves could be generated by measuring time for dichotomous judgment without the subjective scores of diagnostic confidence and applying the DDC model.
Calibration curves for biological dosimetry
International Nuclear Information System (INIS)
Guerrero C, C.; Brena V, M. . E-mail cgc@nuclear.inin.mx
2004-01-01
The generated information by the investigations in different laboratories of the world, included the ININ, in which settles down that certain class of chromosomal leisure it increases in function of the dose and radiation type, has given by result the obtaining of calibrated curves that are applied in the well-known technique as biological dosimetry. In this work is presented a summary of the work made in the laboratory that includes the calibrated curves for gamma radiation of 60 Cobalt and X rays of 250 k Vp, examples of presumed exposure to ionizing radiation, resolved by means of aberration analysis and the corresponding dose estimate through the equations of the respective curves and finally a comparison among the dose calculations in those people affected by the accident of Ciudad Juarez, carried out by the group of Oak Ridge, USA and those obtained in this laboratory. (Author)
DEFF Research Database (Denmark)
Bernstein, Daniel J.; Birkner, Peter; Lange, Tanja
2013-01-01
This paper introduces EECM-MPFQ, a fast implementation of the elliptic-curve method of factoring integers. EECM-MPFQ uses fewer modular multiplications than the well-known GMP-ECM software, takes less time than GMP-ECM, and finds more primes than GMP-ECM. The main improvements above the modular......-arithmetic level are as follows: (1) use Edwards curves instead of Montgomery curves; (2) use extended Edwards coordinates; (3) use signed-sliding-window addition-subtraction chains; (4) batch primes to increase the window size; (5) choose curves with small parameters and base points; (6) choose curves with large...
Considerations for reference pump curves
International Nuclear Information System (INIS)
Stockton, N.B.
1992-01-01
This paper examines problems associated with inservice testing (IST) of pumps to assess their hydraulic performance using reference pump curves to establish acceptance criteria. Safety-related pumps at nuclear power plants are tested under the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (the Code), Section 11. The Code requires testing pumps at specific reference points of differential pressure or flow rate that can be readily duplicated during subsequent tests. There are many cases where test conditions cannot be duplicated. For some pumps, such as service water or component cooling pumps, the flow rate at any time depends on plant conditions and the arrangement of multiple independent and constantly changing loads. System conditions cannot be controlled to duplicate a specific reference value. In these cases, utilities frequently request to use pump curves for comparison of test data for acceptance. There is no prescribed method for developing a pump reference curve. The methods vary and may yield substantially different results. Some results are conservative when compared to the Code requirements; some are not. The errors associated with different curve testing techniques should be understood and controlled within reasonable bounds. Manufacturer's pump curves, in general, are not sufficiently accurate to use as reference pump curves for IST. Testing using reference curves generated with polynomial least squares fits over limited ranges of pump operation, cubic spline interpolation, or cubic spline least squares fits can provide a measure of pump hydraulic performance that is at least as accurate as the Code required method. Regardless of the test method, error can be reduced by using more accurate instruments, by correcting for systematic errors, by increasing the number of data points, and by taking repetitive measurements at each data point
Directory of Open Access Journals (Sweden)
Roberto R Rosato
Full Text Available Methicillin-resistant Staphylococcus aureus (MRSA is a major multidrug resistant pathogen responsible for several difficult-to-treat infections in humans. Clinical Hetero-resistant (HeR MRSA strains, mostly associated with persistent infections, are composed of mixed cell populations that contain organisms with low levels of resistance (hetero-resistant HeR and those that display high levels of drug resistance (homo-resistant HoR. However, the full understanding of β-lactam-mediated HeR/HoR selection remains to be completed. In previous studies we demonstrated that acquisition of the HoR phenotype during exposure to β-lactam antibiotics depended on two key elements: (1 activation of the SOS response, a conserved regulatory network in bacteria that is induced in response to DNA damage, resulting in increased mutation rates, and (2 adaptive metabolic changes redirecting HeR-MRSA metabolism to the tricarboxylic acid (TCA cycle in order to increase the energy supply for cell-wall synthesis. In the present work, we identified that both main mechanistic components are associated through TCA cycle-mediated reactive oxygen species (ROS production, which temporally affects DNA integrity and triggers activation of the SOS response resulting in enhanced mutagenesis. The present work brings new insights into a role of ROS generation on the development of resistance to β-lactam antibiotics in a model of natural occurrence, emphasizing the cytoprotective role in HeR-MRSA survival mechanism.
MICA: Multiple interval-based curve alignment
Mann, Martin; Kahle, Hans-Peter; Beck, Matthias; Bender, Bela Johannes; Spiecker, Heinrich; Backofen, Rolf
2018-01-01
MICA enables the automatic synchronization of discrete data curves. To this end, characteristic points of the curves' shapes are identified. These landmarks are used within a heuristic curve registration approach to align profile pairs by mapping similar characteristics onto each other. In combination with a progressive alignment scheme, this enables the computation of multiple curve alignments. Multiple curve alignments are needed to derive meaningful representative consensus data of measured time or data series. MICA was already successfully applied to generate representative profiles of tree growth data based on intra-annual wood density profiles or cell formation data. The MICA package provides a command-line and graphical user interface. The R interface enables the direct embedding of multiple curve alignment computation into larger analyses pipelines. Source code, binaries and documentation are freely available at https://github.com/BackofenLab/MICA
Applied survival analysis using R
Moore, Dirk F
2016-01-01
Applied Survival Analysis Using R covers the main principles of survival analysis, gives examples of how it is applied, and teaches how to put those principles to use to analyze data using R as a vehicle. Survival data, where the primary outcome is time to a specific event, arise in many areas of biomedical research, including clinical trials, epidemiological studies, and studies of animals. Many survival methods are extensions of techniques used in linear regression and categorical data, while other aspects of this field are unique to survival data. This text employs numerous actual examples to illustrate survival curve estimation, comparison of survivals of different groups, proper accounting for censoring and truncation, model variable selection, and residual analysis. Because explaining survival analysis requires more advanced mathematics than many other statistical topics, this book is organized with basic concepts and most frequently used procedures covered in earlier chapters, with more advanced topics...
Indian Academy of Sciences (India)
mathematics and computer applications for the last 20 years. He has been a National Science. Talent awardee of. NCERT in mathematics. GENERAL I ARTICLE. Space-filling Curves. ReMittal. In this article some Peano curves are exhibited and some of their recent applications are dis- cussed. A C++ program to draw the ...
Tempo curves considered harmful
Desain, P.; Honing, H.
1993-01-01
In the literature of musicology, computer music research and the psychology of music, timing or tempo measurements are mostly presented in the form of continuous curves. The notion of these tempo curves is dangerous, despite its widespread use, because it lulls its users into the false impression
DEFF Research Database (Denmark)
Federici, Paolo; Georgieva Yankova, Ginka
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to a draft of IEC 61400-12-1 Ed.2.......The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to a draft of IEC 61400-12-1 Ed.2....
GEOMETRIC PROGRESSIONS ON ELLIPTIC CURVES.
Ciss, Abdoul Aziz; Moody, Dustin
2017-01-01
In this paper, we look at long geometric progressions on different model of elliptic curves, namely Weierstrass curves, Edwards and twisted Edwards curves, Huff curves and general quartics curves. By a geometric progression on an elliptic curve, we mean the existence of rational points on the curve whose x -coordinate (or y -coordinate) are in geometric progression. We find infinite families of twisted Edwards curves and Huff curves with geometric progressions of length 5, an infinite family of Weierstrass curves with 8 term progressions, as well as infinite families of quartic curves containing 10-term geometric progressions.
Fast pyrolysis of switchgrass (and resultant biochar) can be used for bio-fuel production, soil amendments for fertilizing crops, binding heavy metals, and sequestering environmental biocarbon. To determine the influence of fast pyrolysis-generated switchgrass biochar on survival of foodborne path...
On the Quaternionic Focal Curves
Directory of Open Access Journals (Sweden)
Nurten (BAYRAK GÜRSES
2017-06-01
Full Text Available In this study, a brief summary about quaternions and quaternionic curves are firstly presented. Also, the definition of focal curve is given. The focal curve of a smooth curve consists of the centers of its osculating hypersphere. By using this definition and the quaternionic osculating hyperspheres of these curves, the quaternionic focal curves in the spaces $\\Q$ and $\\Q_\
Directory of Open Access Journals (Sweden)
Paulo Prochno
2004-07-01
Full Text Available Learning curves have been studied for a long time. These studies provided strong support to the hypothesis that, as organizations produce more of a product, unit costs of production decrease at a decreasing rate (see Argote, 1999 for a comprehensive review of learning curve studies. But the organizational mechanisms that lead to these results are still underexplored. We know some drivers of learning curves (ADLER; CLARK, 1991; LAPRE et al., 2000, but we still lack a more detailed view of the organizational processes behind those curves. Through an ethnographic study, I bring a comprehensive account of the first year of operations of a new automotive plant, describing what was taking place on in the assembly area during the most relevant shifts of the learning curve. The emphasis is then on how learning occurs in that setting. My analysis suggests that the overall learning curve is in fact the result of an integration process that puts together several individual ongoing learning curves in different areas throughout the organization. In the end, I propose a model to understand the evolution of these learning processes and their supporting organizational mechanisms.
U.S. Environmental Protection Agency — an UV calibration curve for SRHA quantitation. This dataset is associated with the following publication: Chang, X., and D. Bouchard. Surfactant-Wrapped Multiwalled...
Directory of Open Access Journals (Sweden)
Kožul Nataša
2014-01-01
Full Text Available In the broadest sense, yield curve indicates the market's view of the evolution of interest rates over time. However, given that cost of borrowing it closely linked to creditworthiness (ability to repay, different yield curves will apply to different currencies, market sectors, or even individual issuers. As government borrowing is indicative of interest rate levels available to other market players in a particular country, and considering that bond issuance still remains the dominant form of sovereign debt, this paper describes yield curve construction using bonds. The relationship between zero-coupon yield, par yield and yield to maturity is given and their usage in determining curve discount factors is described. Their usage in deriving forward rates and pricing related derivative instruments is also discussed.
Indian Academy of Sciences (India)
We had defined when an arc is said to cross a circle. We broaden the definition of crossing as follows: Definition: Suppose f is a piece-wise circular simple closed curve and, is a piece-wise circular arc. Suppose ..... curve formed by p' pp", q' qq", part of r between p' and q' and part of r between pI! and q", as shown (Figures 6 ...
DEFF Research Database (Denmark)
Georgieva Yankova, Ginka; Federici, Paolo
This report describes power curve measurements carried out on a given turbine in a chosen period. The measurements are carried out in accordance to IEC 61400-12-1 Ed. 1 and FGW Teil 2.......This report describes power curve measurements carried out on a given turbine in a chosen period. The measurements are carried out in accordance to IEC 61400-12-1 Ed. 1 and FGW Teil 2....
International Nuclear Information System (INIS)
Badwe, R.A.
1999-01-01
The primary endpoint in the majority of the studies has been either disease recurrence or death. This kind of analysis requires a special method since all patients in the study experience the endpoint. The standard method for estimating such survival distribution is Kaplan Meier method. The survival function is defined as the proportion of individuals who survive beyond certain time. Multi-variate comparison for survival has been carried out with Cox's proportional hazard model
Investigation of learning and experience curves
Energy Technology Data Exchange (ETDEWEB)
Krawiec, F.; Thornton, J.; Edesess, M.
1980-04-01
The applicability of learning and experience curves for predicting future costs of solar technologies is assessed, and the major test case is the production economics of heliostats. Alternative methods for estimating cost reductions in systems manufacture are discussed, and procedures for using learning and experience curves to predict costs are outlined. Because adequate production data often do not exist, production histories of analogous products/processes are analyzed and learning and aggregated cost curves for these surrogates estimated. If the surrogate learning curves apply, they can be used to estimate solar technology costs. The steps involved in generating these cost estimates are given. Second-generation glass-steel and inflated-bubble heliostat design concepts, developed by MDAC and GE, respectively, are described; a costing scenario for 25,000 units/yr is detailed; surrogates for cost analysis are chosen; learning and aggregate cost curves are estimated; and aggregate cost curves for the GE and MDAC designs are estimated. However, an approach that combines a neoclassical production function with a learning-by-doing hypothesis is needed to yield a cost relation compatible with the historical learning curve and the traditional cost function of economic theory.
Constructing forward price curves in electricity markets
DEFF Research Database (Denmark)
Fleten, S.-E.; Lemming, Jørgen Kjærgaard
2003-01-01
We present and analyze a method for constructing approximated high-resolution forward price curves in electricity markets. Because a limited number of forward or futures contracts are traded in the market, only a limited picture of the theoretical continuous forward price curve is available...... to the analyst. Our method combines the information contained in observed bid and ask prices with information from the forecasts generated by bottom-up models. As an example, we use information concerning the shape of the seasonal variation from a bottom-up model to improve the forward price curve quoted...
Constructing forward price curves in electricity markets
International Nuclear Information System (INIS)
Fleten, Stein-Erik; Lemming, Jacob
2003-01-01
We present and analyze a method for constructing approximated high-resolution forward price curves in electricity markets. Because a limited number of forward or futures contracts are traded in the market, only a limited picture of the theoretical continuous forward price curve is available to the analyst. Our method combines the information contained in observed bid and ask prices with information from the forecasts generated by bottom-up models. As an example, we use information concerning the shape of the seasonal variation from a bottom-up model to improve the forward price curve quoted on the Nordic power exchange
DEFF Research Database (Denmark)
Gómez Arranz, Paula; Vesth, Allan
This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here, the refere......This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here......, the reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis...
Algebraic curves and cryptography
Murty, V Kumar
2010-01-01
It is by now a well-known paradigm that public-key cryptosystems can be built using finite Abelian groups and that algebraic geometry provides a supply of such groups through Abelian varieties over finite fields. Of special interest are the Abelian varieties that are Jacobians of algebraic curves. All of the articles in this volume are centered on the theme of point counting and explicit arithmetic on the Jacobians of curves over finite fields. The topics covered include Schoof's \\ell-adic point counting algorithm, the p-adic algorithms of Kedlaya and Denef-Vercauteren, explicit arithmetic on
Complementary curves of descent
Mungan, Carl E.; Lipscombe, Trevor C.
2013-01-01
The shapes of two wires in a vertical plane with the same starting and ending points are described as complementary curves of descent if beads frictionlessly slide down both of them in the same time, starting from rest. Every analytic curve has a unique complement, except for a cycloid (solution of the brachistochrone problem), which is self complementary. A striking example is a straight wire whose complement is a lemniscate of Bernoulli. Alternatively, the wires can be tracks down which round objects undergo a rolling race. The level of presentation is appropriate for an intermediate undergraduate course in classical mechanics.
Surface growth kinematics via local curve evolution
Moulton, Derek E.
2012-11-18
A mathematical framework is developed to model the kinematics of surface growth for objects that can be generated by evolving a curve in space, such as seashells and horns. Growth is dictated by a growth velocity vector field defined at every point on a generating curve. A local orthonormal basis is attached to each point of the generating curve and the velocity field is given in terms of the local coordinate directions, leading to a fully local and elegant mathematical structure. Several examples of increasing complexity are provided, and we demonstrate how biologically relevant structures such as logarithmic shells and horns emerge as analytical solutions of the kinematics equations with a small number of parameters that can be linked to the underlying growth process. Direct access to cell tracks and local orientation enables for connections to be made to the underlying growth process. © 2012 Springer-Verlag Berlin Heidelberg.
Groot, L.F.M.|info:eu-repo/dai/nl/073642398
2008-01-01
The purpose of this paper is twofold. First, it exhibits that standard tools in the measurement of income inequality, such as the Lorenz curve and the Gini-index, can successfully be applied to the issues of inequality measurement of carbon emissions and the equity of abatement policies across
Paulton, Richard J. L.
1991-01-01
A procedure that allows students to view an entire bacterial growth curve during a two- to three-hour student laboratory period is described. Observations of the lag phase, logarithmic phase, maximum stationary phase, and phase of decline are possible. A nonpathogenic, marine bacterium is used in the investigation. (KR)
African Journals Online (AJOL)
Adele
Introduction. Both the Unique™ LMA, and lately the Cobra™ PLA, is available in most of the larger state hospitals in South Africa. This study's objective is to evaluate and compare the learning curves for insertion of these two single-use airway devices. This is to ascertain which of these two devices is easier and safer to ...
DEFF Research Database (Denmark)
Kock, Carsten Weber; Vesth, Allan
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....
DEFF Research Database (Denmark)
Federici, Paolo; Kock, Carsten Weber
This report describes the power curve measurements performed with a nacelle LIDAR on a given wind turbine in a wind farm and during a chosen measurement period. The measurements and analysis are carried out in accordance to the guidelines in the procedure “DTU Wind Energy-E-0019” [1]. The reporting...
DEFF Research Database (Denmark)
Gómez Arranz, Paula; Villanueva, Héctor
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine...
DEFF Research Database (Denmark)
Gómez Arranz, Paula; Kock, Carsten Weber
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....
DEFF Research Database (Denmark)
Georgieva Yankova, Ginka; Villanueva, Héctor
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present anal...
DEFF Research Database (Denmark)
Villanueva, Héctor; Vesth, Allan
This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here, the refere...
DEFF Research Database (Denmark)
Gómez Arranz, Paula; Villanueva, Héctor
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present anal...
Textbook Factor Demand Curves.
Davis, Joe C.
1994-01-01
Maintains that teachers and textbook graphics follow the same basic pattern in illustrating changes in demand curves when product prices increase. Asserts that the use of computer graphics will enable teachers to be more precise in their graphic presentation of price elasticity. (CFR)
DEFF Research Database (Denmark)
Vesth, Allan; Kock, Carsten Weber
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....
DEFF Research Database (Denmark)
Villanueva, Héctor; Gómez Arranz, Paula
, the reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis...
Power Curve Measurements, REWS
DEFF Research Database (Denmark)
Villanueva, Héctor; Gómez Arranz, Paula
, the reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis...
DEFF Research Database (Denmark)
Federici, Paolo; Kock, Carsten Weber
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine...
DEFF Research Database (Denmark)
Gómez Arranz, Paula; Wagner, Rozenn
This report describes the power curve measurements performed with a nacelle LIDAR on a given wind turbine in a wind farm and during a chosen measurement period. The measurements and analysis are carried out in accordance to the guidelines in the procedure “DTU Wind Energy-E-0019” [1]. The reporting...
Lieberwirth, Claudia; Wang, Yue; Jia, Xixi; Liu, Yan
2013-01-01
Motherhood has profound effects on physiology, neuronal plasticity, and behavior. We conducted a series of experiments to test the hypothesis that fatherhood, similarly to motherhood, affects brain plasticity (such as cell proliferation and survival) and various behaviors in the highly social prairie vole (Microtus ochrogaster). In Experiment 1, adult males were housed with their same-sex cage mate (control), single-housed (isolation), or housed with a receptive female to mate and produce offspring (father) for 6 weeks. Fatherhood significantly reduced cell survival (assessed by bromodeoxyuridine labeling), but not cell proliferation (assessed by Ki67 labeling), in the amygdala, dentate gyrus of the hippocampus, and ventromedial hypothalamus, suggesting that fatherhood affects brain plasticity. In Experiment 2, neither acute (20 min) nor chronic (20 min daily for 10 consecutive days) pup exposure altered cell proliferation or survival in the brain, but chronic pup exposure increased circulating corticosterone levels. These data suggest that reduced cell survival in the brain of prairie vole fathers was unlikely to be due to the level of pup exposure and display of paternal behavior, and may not be mediated by circulating corticosterone. The effects of fatherhood on various behaviors (including anxiety-like, depression-like, and social behaviors) were examined in Experiment 3. The data indicated that fatherhood increased anxiety- and depression-like behaviors as well as altered aggression and social recognition memory in male prairie voles. These results warrant further investigation of a possible link between brain plasticity and behavioral changes observed due to fatherhood. PMID:23899240
A statistical solution for survival curves in photobiology
International Nuclear Information System (INIS)
Chen, L.C.
1981-01-01
The mathematical model that includes the cellular repair mechanisms proposed by Haynes and modified by Pelico has been adjusted by Non-linear Least Squares Method and a computer program was also used. The parametric values obtained agreed with the graphic ones. This method has the advantage that one can obtain the parameters by a function fitting at all the experimental measurement, and also allows the determination of experimental errors. The studies performed on pre-starved cells without amino-acids and glucose show a greater photo-resistance for strains non mutated in uvr gene. This phenomenon appears to be dependent on functionality of this gene. A mathematical model was proposed to describe quantitatively the starvation effect in function of time. (Author) [pt
Approximation by planar elastic curves
DEFF Research Database (Denmark)
Brander, David; Gravesen, Jens; Nørbjerg, Toke Bjerge
2016-01-01
We give an algorithm for approximating a given plane curve segment by a planar elastic curve. The method depends on an analytic representation of the space of elastic curve segments, together with a geometric method for obtaining a good initial guess for the approximating curve. A gradient-driven...
Energy Technology Data Exchange (ETDEWEB)
Groot, L. [Utrecht University, Utrecht School of Economics, Janskerkhof 12, 3512 BL Utrecht (Netherlands)
2008-11-15
The purpose of this paper is twofold. First, it exhibits that standard tools in the measurement of income inequality, such as the Lorenz curve and the Gini-index, can successfully be applied to the issues of inequality measurement of carbon emissions and the equity of abatement policies across countries. These tools allow policy-makers and the general public to grasp at a single glance the impact of conventional distribution rules such as equal caps or grandfathering, or more sophisticated ones, on the distribution of greenhouse gas emissions. Second, using the Samuelson rule for the optimal provision of a public good, the Pareto-optimal distribution of carbon emissions is compared with the distribution that follows if countries follow Nash-Cournot abatement strategies. It is shown that the Pareto-optimal distribution under the Samuelson rule can be approximated by the equal cap division, represented by the diagonal in the Lorenz curve diagram.
DEFF Research Database (Denmark)
Villanueva, Héctor; Gómez Arranz, Paula
This report describes the analysis carried out with data from a given turbine in a wind farm and a chosen period. The purpose of the analysis is to correlate the power output of the wind turbine to the wind speed measured by a nacelle-mounted anemometer. The measurements and analysis are not perf......This report describes the analysis carried out with data from a given turbine in a wind farm and a chosen period. The purpose of the analysis is to correlate the power output of the wind turbine to the wind speed measured by a nacelle-mounted anemometer. The measurements and analysis...... are not performed according to IEC 61400-12-1 [1]. Therefore, the results presented in this report cannot be considered a power curve according to the reference standard, and are referred to as “power curve investigation” instead. The measurements have been performed by a customer and the data analysis has been...
Directory of Open Access Journals (Sweden)
Iram Ansari
2012-01-01
Full Text Available Dilaceration is the result of a developmental anomaly in which there has been an abrupt change in the axial inclination between the crown and the root of a tooth. Dilaceration can be seen in both the permanent and deciduous dentitions, and is more commonly found in posterior teeth and in maxilla. Periapical radiographs are the most appropriate way to diagnose the presence of root dilacerations. The controlled regularly tapered preparation of the curved canals is the ultimate challenge in endodontics. Careful and meticulous technique will yield a safe and sufficient enlargement of the curved canals. This article gives a review of the literature and three interesting case reports of root dilacerations.
Kronberg, Max; Soomro, Muhammad Afzal; Top, Jaap
2017-10-01
In this note we extend the theory of twists of elliptic curves as presented in various standard texts for characteristic not equal to two or three to the remaining characteristics. For this, we make explicit use of the correspondence between the twists and the Galois cohomology set H^1\\big({G}_{\\overline{K}/K}, \\operatorname{Aut}_{\\overline{K}}(E)\\big). The results are illustrated by examples.
Transvaginal cholecystectomy learning curve.
Wood, Stephanie G; Dai, Feng; Dabu-Bondoc, Susan; Mikhael, Hosni; Vadivelu, Nalini; Duffy, Andrew; Roberts, Kurt E
2015-07-01
There are few surgeons in the United States, within private practice and academic centers, currently performing transvaginal cholecystectomies (TVC). The lack of exposure to TVC during residency or fellowship training, coupled with a poorly defined learning curve, further limits interested surgeons who want to apply this technique to their practice. This study describes the learning curve encountered during the introduction of TVC to our academic facility. This study is an analysis of consecutive TVCs performed between August 14, 2009 and August 3, 2012 at an academic center. The TVC patients were divided into sequential quartiles (n = 15/16). The learning curve outcome was measured as the operative time of TVC patients and compared to the operative time of female laparoscopic cholecystectomy (LC) patients performed during the same time period. Sixty-one patients underwent a TVC with a mean age of 38 ± 12 years and mean BMI was 29 ± 6 kg/m(2). Sixty-seven female patients who underwent a LC with average age 41 ± 15 years and average BMI 33 ± 12 kg/m(2). The average operative time of LC patients and TVC patients was 48 ± 20 and 60 ± 17 min, respectively. Significant improvement in TVC operative times was seen between the first (n = 15 TVCs) and second quartiles (p = 0.04) and stayed relatively constant for third quartile, during which there was no statistically significant difference between the mean LC operative time for the second and third TVC quartiles The learning curve of a fellowship-trained surgeon introducing TVC to their surgical repertoire, as measured by improved operative times, can be achieved with approximately 15 cases.
Pelce, Pierre
1989-01-01
In recent years, much progress has been made in the understanding of interface dynamics of various systems: hydrodynamics, crystal growth, chemical reactions, and combustion. Dynamics of Curved Fronts is an important contribution to this field and will be an indispensable reference work for researchers and graduate students in physics, applied mathematics, and chemical engineering. The book consist of a 100 page introduction by the editor and 33 seminal articles from various disciplines.
Vo, Martin
2017-08-01
Light Curves Classifier uses data mining and machine learning to obtain and classify desired objects. This task can be accomplished by attributes of light curves or any time series, including shapes, histograms, or variograms, or by other available information about the inspected objects, such as color indices, temperatures, and abundances. After specifying features which describe the objects to be searched, the software trains on a given training sample, and can then be used for unsupervised clustering for visualizing the natural separation of the sample. The package can be also used for automatic tuning parameters of used methods (for example, number of hidden neurons or binning ratio). Trained classifiers can be used for filtering outputs from astronomical databases or data stored locally. The Light Curve Classifier can also be used for simple downloading of light curves and all available information of queried stars. It natively can connect to OgleII, OgleIII, ASAS, CoRoT, Kepler, Catalina and MACHO, and new connectors or descriptors can be implemented. In addition to direct usage of the package and command line UI, the program can be used through a web interface. Users can create jobs for ”training” methods on given objects, querying databases and filtering outputs by trained filters. Preimplemented descriptors, classifier and connectors can be picked by simple clicks and their parameters can be tuned by giving ranges of these values. All combinations are then calculated and the best one is used for creating the filter. Natural separation of the data can be visualized by unsupervised clustering.
Directory of Open Access Journals (Sweden)
A. Wosińska
2013-12-01
Full Text Available Studies were undertaken on the effect of different doses of gamma radiation on survival rate of plants (germinated from irradiated seeds for 5 China aster varieties specified at florescence time. During their growth under field conditions (from planting time to blooming lethal effect of the radiation occurred in plants of all varieties and its level depended on dose and variety. Effect of 3 kR and 6 kR doses differed depending on variety and was not always harmful, but following irradiation with doses exceeding 6 kR a considerable decrease in survival rate was observed. Radioresistance of studied varieties - measured both: by LD50 and LDl00 - differed; depending on variety, LD50 and LDl00 values fluctuated: from 6 to 9 kR and 12 to 15 kR respectively.
Hammer, A
2017-11-01
It was 140 years ago that George von Meyer presented his anatomical diagrams of human bones to a meeting in Zurich. There he was told by Prof. Karl Culmann that the trabecular lines shown within the diagram of the upper femur closely resembled those lines of force which Culmann had determined with Graphic Statics to be passing through a curved, loaded Fairbairn crane. This drew the attention of Julius Wolff, who used this as the basis for his 'Trajectorial theory' which was widely accepted and, to date, has been the underlying basis for all biomechanical investigations of this region. Following Wolff and Culmann, the upper femur is considered to be a curved structure and is investigated as such. Unfortunately, this concept is wrong. The upper femur is not curved but is angular. It is formed by the junction of two straight bones, the femoral neck and the femoral shaft, as may be simply seen as the neck/shaft angle constructed on the antero-posterior radiograph of any normal femur. The internal trabecular bone forms only part of the load bearing structure of the femoral neck. The configuration of this trabecular substance in this region suggests that it is related specifically to the force present during flexion and extension movements of the hip joint. This being so, combined with the delayed timing of the appearance of the trabecular columns, it must be questioned as to whether the remodelling of the upper femur is in response to one or to two distinct forces.
Lieberwirth, Claudia; Wang, Yue; Jia, Xixi; Liu, Yan; Wang, Zuoxin
2013-11-01
Motherhood has profound effects on physiology, neuronal plasticity, and behavior. We conducted a series of experiments to test the hypothesis that fatherhood, similarly to motherhood, affects brain plasticity (such as cell proliferation and survival) and various behaviors in the highly social prairie vole (Microtus ochrogaster). In Experiment 1, adult males were housed with their same-sex cage mate (control), single-housed (isolation), or housed with a receptive female to mate and produce offspring (father) for 6 weeks. Fatherhood significantly reduced cell survival (assessed by bromodeoxyuridine labeling), but not cell proliferation (assessed by Ki67-labeling), in the amygdala, dentate gyrus of the hippocampus, and ventromedial hypothalamus, suggesting that fatherhood affects brain plasticity. In Experiment 2, neither acute (20 min) nor chronic (20 min daily for 10 consecutive days) pup exposure altered cell proliferation or survival in the brain, but chronic pup exposure increased circulating corticosterone levels. These data suggest that reduced cell survival in the brain of prairie vole fathers was unlikely to be due to the level of pup exposure and display of paternal behavior, and may not be mediated by circulating corticosterone. The effects of fatherhood on various behaviors (including anxiety-like, depression-like, and social behaviors) were examined in Experiment 3. The data indicated that fatherhood increased anxiety- and depression-like behaviors as well as altered aggression and social recognition memory in male prairie voles. These results warrant further investigation of a possible link between brain plasticity and behavioral changes observed due to fatherhood. © 2013 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.
Flow characteristics of curved ducts
Directory of Open Access Journals (Sweden)
Rudolf P.
2007-10-01
Full Text Available Curved channels are very often present in real hydraulic systems, e.g. curved diffusers of hydraulic turbines, S-shaped bulb turbines, fittings, etc. Curvature brings change of velocity profile, generation of vortices and production of hydraulic losses. Flow simulation using CFD techniques were performed to understand these phenomena. Cases ranging from single elbow to coupled elbows in shapes of U, S and spatial right angle position with circular cross-section were modeled for Re = 60000. Spatial development of the flow was studied and consequently it was deduced that minor losses are connected with the transformation of pressure energy into kinetic energy and vice versa. This transformation is a dissipative process and is reflected in the amount of the energy irreversibly lost. Least loss coefficient is connected with flow in U-shape elbows, biggest one with flow in Sshape elbows. Finally, the extent of the flow domain influenced by presence of curvature was examined. This isimportant for proper placement of mano- and flowmeters during experimental tests. Simulations were verified with experimental results presented in literature.
Tempo curves considered harmful (part 2)
Desain, P.; Honing, H.
1991-01-01
A column (the second of a series of three) constitutes an abridged and adapted version of Tempo curves considered harmful . M (an amateur mathematician) and P (a would-be psychologist) incorporated some generative models for expressive timing in their sequencer program. This proved partially
Sadek, Mohammad
2012-01-01
In this paper we consider genus one equations of degree $n$, namely a (generalised) binary quartic when $n=2$, a ternary cubic when $n=3$, and a pair of quaternary quadrics when $n=4$. A new definition for the minimality of genus one equations of degree $n$ over local fields is introduced. The advantage of this definition is that it does not depend on invariant theory of genus one curves. We prove that this definition coincides with the classical definition of minimality for all $n\\le4$. As a...
Learning from uncertain curves
DEFF Research Database (Denmark)
Mallasto, Anton; Feragen, Aasa
2017-01-01
We introduce a novel framework for statistical analysis of populations of nondegenerate Gaussian processes (GPs), which are natural representations of uncertain curves. This allows inherent variation or uncertainty in function-valued data to be properly incorporated in the population analysis....... Using the 2-Wasserstein metric we geometrize the space of GPs with L2 mean and covariance functions over compact index spaces. We prove uniqueness of the barycenter of a population of GPs, as well as convergence of the metric and the barycenter of their finite-dimensional counterparts. This justifies...
Sadik, N
1992-12-01
The global population growth rate has been 1.7% since 1975, while for developing countries it is 2.1%. UN projections are for population to grow from 5.5 billion in 1992 to 10 billion by 2050. Sustainable development is only possible when population growth is balanced with available resources. UN medium population projections of 7.8 billion by 2050 can be reached with 187 million more couples practicing family planning (FP) by the year 2000. Within the past 20 years, 1 billion people, mostly from developed countries, have enjoyed economic growth, but have contributed polluting technologies, excessive waste, and environmentally dangerous economic practices. The generations to come will be affected by the continuance of these practices by the 1 billion affluent population. The bottom billion are mired in poverty and high population growth and survival, needs that hinder their country's economic development, upset fragile ecosystems, and destroy the balance between human beings and the environment. International migration on a large scale could be the by-product of population growth. Progress has been made since the 1974 UN Conference on Population in Bucharest. There are still, however, vulnerable populations, the poorest households, the landless and small-holder families, urban squatters and slum dwellers, those living in low lying deltas and along coasts, and women. Women control family resources and their micro environment. Sustainable development is not possible without the elimination of prejudice against women. Reproductive freedom for women must be a priority. High quality, readily available FP services are also needed for those desiring this. The difficulty is in providing FP services that conform to a woman's social and cultural background and personal needs; success is dependent on involving women in the process and holding men more responsible for FP. Development means allowing for the legitimate aspirations of the majority not just the specialized
Probing exoplanet clouds with optical phase curves.
Muñoz, Antonio García; Isaak, Kate G
2015-11-03
Kepler-7b is to date the only exoplanet for which clouds have been inferred from the optical phase curve--from visible-wavelength whole-disk brightness measurements as a function of orbital phase. Added to this, the fact that the phase curve appears dominated by reflected starlight makes this close-in giant planet a unique study case. Here we investigate the information on coverage and optical properties of the planet clouds contained in the measured phase curve. We generate cloud maps of Kepler-7b and use a multiple-scattering approach to create synthetic phase curves, thus connecting postulated clouds with measurements. We show that optical phase curves can help constrain the composition and size of the cloud particles. Indeed, model fitting for Kepler-7b requires poorly absorbing particles that scatter with low-to-moderate anisotropic efficiency, conclusions consistent with condensates of silicates, perovskite, and silica of submicron radii. We also show that we are limited in our ability to pin down the extent and location of the clouds. These considerations are relevant to the interpretation of optical phase curves with general circulation models. Finally, we estimate that the spherical albedo of Kepler-7b over the Kepler passband is in the range 0.4-0.5.
Finch, Hilvan A.
1987-01-01
A device for analyzing commutating characteristics of a motor or generator includes a holder for supporting a plurality of probes adjacent a brush of the motor or generator. Measurements of electrical current characteristics in each of the probes provides information useful in analyzing operation of the machine. Methods for employing a device in accordance with the invention are also disclosed.
Learning curves in health professions education.
Pusic, Martin V; Boutis, Kathy; Hatala, Rose; Cook, David A
2015-08-01
Learning curves, which graphically show the relationship between learning effort and achievement, are common in published education research but are not often used in day-to-day educational activities. The purpose of this article is to describe the generation and analysis of learning curves and their applicability to health professions education. The authors argue that the time is right for a closer look at using learning curves-given their desirable properties-to inform both self-directed instruction by individuals and education management by instructors.A typical learning curve is made up of a measure of learning (y-axis), a measure of effort (x-axis), and a mathematical linking function. At the individual level, learning curves make manifest a single person's progress towards competence including his/her rate of learning, the inflection point where learning becomes more effortful, and the remaining distance to mastery attainment. At the group level, overlaid learning curves show the full variation of a group of learners' paths through a given learning domain. Specifically, they make overt the difference between time-based and competency-based approaches to instruction. Additionally, instructors can use learning curve information to more accurately target educational resources to those who most require them.The learning curve approach requires a fine-grained collection of data that will not be possible in all educational settings; however, the increased use of an assessment paradigm that explicitly includes effort and its link to individual achievement could result in increased learner engagement and more effective instructional design.
Directory of Open Access Journals (Sweden)
Je Hyun Baekt
2000-01-01
Full Text Available A numerical study is conducted on the fully-developed laminar flow of an incompressible viscous fluid in a square duct rotating about a perpendicular axis to the axial direction of the duct. At the straight duct, the rotation produces vortices due to the Coriolis force. Generally two vortex cells are formed and the axial velocity distribution is distorted by the effect of this Coriolis force. When a convective force is weak, two counter-rotating vortices are shown with a quasi-parabolic axial velocity profile for weak rotation rates. As the rotation rate increases, the axial velocity on the vertical centreline of the duct begins to flatten and the location of vorticity center is moved near to wall by the effect of the Coriolis force. When the convective inertia force is strong, a double-vortex secondary flow appears in the transverse planes of the duct for weak rotation rates but as the speed of rotation increases the secondary flow is shown to split into an asymmetric configuration of four counter-rotating vortices. If the rotation rates are increased further, the secondary flow restabilizes to a slightly asymmetric double-vortex configuration. Also, a numerical study is conducted on the laminar flow of an incompressible viscous fluid in a 90°-bend square duct that rotates about axis parallel to the axial direction of the inlet. At a 90°-bend square duct, the feature of flow by the effect of a Coriolis force and a centrifugal force, namely a secondary flow by the centrifugal force in the curved region and the Coriolis force in the downstream region, is shown since the centrifugal force in curved region and the Coriolis force in downstream region are dominant respectively.
Magnetism in curved geometries
Streubel, Robert
Deterministically bending and twisting two-dimensional structures in the three-dimensional (3D) space provide means to modify conventional or to launch novel functionalities by tailoring curvature and 3D shape. The recent developments of 3D curved magnetic geometries, ranging from theoretical predictions over fabrication to characterization using integral means as well as advanced magnetic tomography, will be reviewed. Theoretical works predict a curvature-induced effective anisotropy and effective Dzyaloshinskii-Moriya interaction resulting in a vast of novel effects including magnetochiral effects (chirality symmetry breaking) and topologically induced magnetization patterning. The remarkable development of nanotechnology, e.g. preparation of high-quality extended thin films, nanowires and frameworks via chemical and physical deposition as well as 3D nano printing, has granted first insights into the fundamental properties of 3D shaped magnetic objects. Optimizing magnetic and structural properties of these novel 3D architectures demands new investigation methods, particularly those based on vector tomographic imaging. Magnetic neutron tomography and electron-based 3D imaging, such as electron holography and vector field electron tomography, are well-established techniques to investigate macroscopic and nanoscopic samples, respectively. At the mesoscale, the curved objects can be investigated using the novel method of magnetic X-ray tomography. In spite of experimental challenges to address the appealing theoretical predictions of curvature-induced effects, those 3D magnetic architectures have already proven their application potential for life sciences, targeted delivery, realization of 3D spin-wave filters, and magneto-encephalography devices, to name just a few. DOE BES MSED (DE-AC02-05-CH11231).
DEFF Research Database (Denmark)
Ashauer, Roman; Albert, Carlo; Augustine, Starrlight
2016-01-01
well GUTS, calibrated with short-term survival data of Gammarus pulex exposed to four pesticides, can forecast effects of longer-term pulsed exposures. Thirdly, we tested the ability of GUTS to estimate 14-day median effect concentrations of malathion for a range of species and use these estimates...
Miller, Rupert G
2011-01-01
A concise summary of the statistical methods used in the analysis of survival data with censoring. Emphasizes recently developed nonparametric techniques. Outlines methods in detail and illustrates them with actual data. Discusses the theory behind each method. Includes numerous worked problems and numerical exercises.
A Method of Timbre-Shape Synthesis Based On Summation of Spherical Curves
DEFF Research Database (Denmark)
Putnam, Lance Jonathan
2014-01-01
for simultaneous production of sonic tones and graphical curves based on additive synthesis of spherical curves. The spherical curves are generated from a sequence of elemental 3D rotations, similar to a Euler rotation. We show that this method can produce many important two- and three-dimensional curves directly...
Directory of Open Access Journals (Sweden)
Sergey A. Cherkis
2007-03-01
Full Text Available A typical solution of an integrable system is described in terms of a holomorphic curve and a line bundle over it. The curve provides the action variables while the time evolution is a linear flow on the curve's Jacobian. Even though the system of Nahm equations is closely related to the Hitchin system, the curves appearing in these two cases have very different nature. The former can be described in terms of some classical scattering problem while the latter provides a solution to some Seiberg-Witten gauge theory. This note identifies the setup in which one can formulate the question of relating the two curves.
Communicating with the Net Generation
2011-03-11
Generation Y or Millennial Generation . This generation has learned to survive and thrive in the connected era. The Net Generation has... Generation is often referred to as Generation Y or Millennial Generation . This generation has learned to survive and thrive in the connected era. The Net...rich, digitally constructed communication and information world.2 Although this generation is often referred to as Generation Y or
Directory of Open Access Journals (Sweden)
C. N. Baby Maheswari
2014-03-01
Full Text Available This article examines the complexities in the lives of African-Americans. It discusses the psycho-social challenges they faced in the twentieth century and their relentless efforts to attain, secure and define a sense of dignity to lead their lives. It also discusses the vulnerability of their existence and the sad dilemma in which the blacks were caught. The play has been deliberately selected for investigation as Lorrane Hansberry depicts, very skillfully, not only the gaps and inconsistencies of the two generations, but also the clashes in their aspirations and values. These struggles and clashes are epitomized in Walter and Mama Lena in the play and are discussed, from various perspectives, in the present article. Offering background to both the writer and the play, the article explores how Hansberry juxtaposes these ideas; that is, Mama finding the freedom to be sufficient for her happiness; where as, her children perceiving money as the new path to provide sense of happiness. The rebellion of Beneatha against the African-American value system and her rejection of the ideals of the family as well as the aspirations of younger generation for self- fulfillment, the sufferings of older generations, the pain of racial discrimination and the struggles for gaining the rights and dignity also form the very important topics of discussion in the paper.
Johnson, L. E.; Kim, J.; Cifelli, R.; Chandra, C. V.
2016-12-01
Potential water retention, S, is one of parameters commonly used in hydrologic modeling for soil moisture accounting. Physically, S indicates total amount of water which can be stored in soil and is expressed in units of depth. S can be represented as a change of soil moisture content and in this context is commonly used to estimate direct runoff, especially in the Soil Conservation Service (SCS) curve number (CN) method. Generally, the lumped and the distributed hydrologic models can easily use the SCS-CN method to estimate direct runoff. Changes in potential water retention have been used in previous SCS-CN studies; however, these studies have focused on long-term hydrologic simulations where S is allowed to vary at the daily time scale. While useful for hydrologic events that span multiple days, the resolution is too coarse for short-term applications such as flash flood events where S may not recover its full potential. In this study, a new method for estimating a time-variable potential water retention at hourly time-scales is presented. The methodology is applied for the Napa River basin, California. The streamflow gage at St Helena, located in the upper reaches of the basin, is used as the control gage site to evaluate the model performance as it is has minimal influences by reservoirs and diversions. Rainfall events from 2011 to 2012 are used for estimating the event-based SCS CN to transfer to S. As a result, we have derived the potential water retention curve and it is classified into three sections depending on the relative change in S. The first is a negative slope section arising from the difference in the rate of moving water through the soil column, the second is a zero change section representing the initial recovery the potential water retention, and the third is a positive change section representing the full recovery of the potential water retention. Also, we found that the soil water moving has traffic jam within 24 hours after finished first
An efficient modified Elliptic Curve Digital Signature Algorithm | Kiros ...
African Journals Online (AJOL)
Many digital signatures which are based on Elliptic Curves Cryptography (ECC) have been proposed. Among these digital signatures, the Elliptic Curve Digital Signature Algorithm (ECDSA) is the widely standardized one. However, the verification process of ECDSA is slower than the signature generation process. Hence ...
Spherical images and inextensible curved folding
Seffen, Keith A.
2018-02-01
In their study, Duncan and Duncan [Proc. R. Soc. London A 383, 191 (1982), 10.1098/rspa.1982.0126] calculate the shape of an inextensible surface folded in two about a general curve. They find the analytical relationships between pairs of generators linked across the fold curve, the shape of the original path, and the fold angle variation along it. They present two special cases of generator layouts for which the fold angle is uniform or the folded curve remains planar, for simplifying practical folding in sheet-metal processes. We verify their special cases by a graphical treatment according to a method of Gauss. We replace the fold curve by a piecewise linear path, which connects vertices of intersecting pairs of hinge lines. Inspired by the d-cone analysis by Farmer and Calladine [Int. J. Mech. Sci. 47, 509 (2005), 10.1016/j.ijmecsci.2005.02.013], we construct the spherical images for developable folding of successive vertices: the operating conditions of the special cases in Duncan and Duncan are then revealed straightforwardly by the geometric relationships between the images. Our approach may be used to synthesize folding patterns for novel deployable and shape-changing surfaces without need of complex calculation.
Advanced Online Survival Analysis Tool for Predictive Modelling in Clinical Data Science.
Montes-Torres, Julio; Subirats, José Luis; Ribelles, Nuria; Urda, Daniel; Franco, Leonardo; Alba, Emilio; Jerez, José Manuel
2016-01-01
One of the prevailing applications of machine learning is the use of predictive modelling in clinical survival analysis. In this work, we present our view of the current situation of computer tools for survival analysis, stressing the need of transferring the latest results in the field of machine learning to biomedical researchers. We propose a web based software for survival analysis called OSA (Online Survival Analysis), which has been developed as an open access and user friendly option to obtain discrete time, predictive survival models at individual level using machine learning techniques, and to perform standard survival analysis. OSA employs an Artificial Neural Network (ANN) based method to produce the predictive survival models. Additionally, the software can easily generate survival and hazard curves with multiple options to personalise the plots, obtain contingency tables from the uploaded data to perform different tests, and fit a Cox regression model from a number of predictor variables. In the Materials and Methods section, we depict the general architecture of the application and introduce the mathematical background of each of the implemented methods. The study concludes with examples of use showing the results obtained with public datasets.
Potential energy curves for neutral and multiply charged carbon ...
Indian Academy of Sciences (India)
Abstract. Potential energy curves of various electronic states of CO+ (0 ≤ ≤ 6) are generated at MRCI/CASSCF level using cc-pvQZ basis set and the results are compared with available experimental and theoretical data.
Optimization on Spaces of Curves
DEFF Research Database (Denmark)
Møller-Andersen, Jakob
This thesis is concerned with computational and theoretical aspects of Riemannian metrics on spaces of regular curves, and their applications. It was recently proved that second order constant coefficient Sobolev metrics on curves are geodesically complete. We extend this result to the case...... of Sobolev metrics with coefficient functions depending on the length of the curve. We show how to apply this result to analyse a wide range of metrics on the submanifold of unit and constant speed curves. We present a numerical discretization of second order Sobolev metrics on the space of regular curves...... of cardiac deformations. Finally we investigate a new application of Riemannian shape analysis in shape optimization. We setup a simple elliptic model problem, and describe how to apply shape calculus to obtain directional derivatives in the manifold of planar curves. We present an implementation based...
Reflection of curved shock waves
Mölder, S.
2017-09-01
Shock curvatures are related to pressure gradients, streamline curvatures and vorticity in flows with planar and axial symmetry. Explicit expressions, in an influence coefficient format, are used to relate post-shock pressure gradient, streamline curvature and vorticity to pre-shock gradients and shock curvature in steady flow. Using higher order, von Neumann-type, compatibility conditions, curved shock theory is applied to calculate the flow near singly and doubly curved shocks on curved surfaces, in regular shock reflection and in Mach reflection. Theoretical curved shock shapes are in good agreement with computational fluid dynamics calculations and experiment.
Energy Technology Data Exchange (ETDEWEB)
Hoff, Gabriela; Fischer, Andreia Caroline Fischer da Silveira; Accurso, Andre, E-mail: andreia.silveira.001@acad.pucrs.b, E-mail: andre.accurso@acad.pucrs.b [Pontificia Universidade Catolica do Rio Grande do Sul (PUC/RS), Porto Alegre, RS (Brazil). Grupo de Experimentacao e Simulacacao Computacional em Fisica Medica; Andrade, Jose Rodrigo Mendes, E-mail: jose.andrade@santacasa.tche.b [Irmandade da Santa Casa de Misericordia de Porto Alegre, RS (Brazil). Servico de Atencao a Saude e Qualidade de Vida; Bacelar, Alexandre, E-mail: abacelar@hcpa.ufrgs.b [Hospital de Clinicas de Porto Alegre, RS (Brazil). Setor de Fisica Medica e Radioprotecao
2011-10-26
This paper intended to measure iso expositions curves in areas of mobile equipment use. It was selected: a Shimadzu mobile equipment and two Siemens equipment, being used a non-anthropomorphic scatterer. The exposure measurements in mesh of 4.20 x 4.20 cubic centimeters, at a half-height of the simulator and steps of 30 cm, were used by using the radiographic techniques: 100 k Vp and 63 m As (Shimadzu) and 96 k Vp and 40 m As (Siemens). For estimation of environmental equivalent dose, during 12 months, were considered: 3.55 m As/examination and 44.5 procedures/month (adults): and 3.16 m As/examination and 20.1 procedures/month (pediatrics). It was observed that only the values in the distance of 60 cm presented over the maximum limit of environment equivalent dose defined for Free Area (0.5 mSv/year). The points collected at 2.1 m from the primary beam center, have shown to be always 12% of referred limit, shown to be a safe distance for the hospitalized patients
Regular homotopy of Hurwitz curves
International Nuclear Information System (INIS)
Auroux, D; Kulikov, Vik S; Shevchishin, V V
2004-01-01
We prove that any two irreducible cuspidal Hurwitz curves C 0 adn C 1 (or, more generally, two curves with A-type singularities) in the Hirzebruch surface F N with the same homology classes and sets of singularities are regular homotopic. Moreover, they are symplectically regular homotopic if C 0 and C 1 are symplectic with respect to a compatible symplectic form
Space curves, anholonomy and nonlinearity
Indian Academy of Sciences (India)
Walker parallel transport [14] of any vector P moved ... of Fermi–Walker parallel transport to the case of a moving space curve. 4. General curve evolution equations .... ear term of the Lamb equation (eq. (34)) is just the time derivative of the total.
Computational aspects of algebraic curves
Shaska, Tanush
2005-01-01
The development of new computational techniques and better computing power has made it possible to attack some classical problems of algebraic geometry. The main goal of this book is to highlight such computational techniques related to algebraic curves. The area of research in algebraic curves is receiving more interest not only from the mathematics community, but also from engineers and computer scientists, because of the importance of algebraic curves in applications including cryptography, coding theory, error-correcting codes, digital imaging, computer vision, and many more.This book cove
Elliptic Curves and Number Theory
Indian Academy of Sciences (India)
R. Sujatha, School of Mathematics, Tata Institute of Fundamental Research, Mumbai, INDIA
1. Aim: To explain the connection between a simple ancient problem in number theory and a deep sophisticated conjecture about Elliptic Curves. ('arithmetic Geometry'). Notation: N : set of natural numbers (1,2,3,...) ...
Management of the learning curve
DEFF Research Database (Denmark)
Pedersen, Peter-Christian; Slepniov, Dmitrij
2016-01-01
Purpose – This paper focuses on the management of the learning curve in overseas capacity expansions. The purpose of this paper is to unravel the direct as well as indirect influences on the learning curve and to advance the understanding of how these affect its management. Design/methodology...... the dimensions of the learning process involved in a capacity expansion project and identified the direct and indirect labour influences on the production learning curve. On this basis, the study proposes solutions to managing learning curves in overseas capacity expansions. Furthermore, the paper concludes...... employs qualitative methodology and draws on a longitudinal, factory-level analysis of an in-depth case study of a Danish wind turbine manufacturer. Findings – This study goes beyond a simplistic treatment of the lead time and learning required to establish a new capacity. The authors examined...
Nonlinear mechanics of rigidifying curves.
Al Mosleh, Salem; Santangelo, Christian
2017-07-01
Thin shells are characterized by a high cost of stretching compared to bending. As a result isometries of the midsurface of a shell play a crucial role in their mechanics. In turn, curves on the midsurface with zero normal curvature play a critical role in determining the number and behavior of isometries. In this paper, we show how the presence of these curves results in a decrease in the number of linear isometries. Paradoxically, shells are also known to continuously fold more easily across these rigidifying curves than other curves on the surface. We show how including nonlinearities in the strain can explain these phenomena and demonstrate folding isometries with explicit solutions to the nonlinear isometry equations. In addition to explicit solutions, exact geometric arguments are given to validate and guide our analysis in a coordinate-free way.
Modular forms and special cycles on Shimura curves (AM-161)
Kudla, Stephen S; Yang, Tonghai
2006-01-01
Modular Forms and Special Cycles on Shimura Curves is a thorough study of the generating functions constructed from special cycles, both divisors and zero-cycles, on the arithmetic surface ""M"" attached to a Shimura curve ""M"" over the field of rational numbers. These generating functions are shown to be the q-expansions of modular forms and Siegel modular forms of genus two respectively, valued in the Gillet-Soulé arithmetic Chow groups of ""M"". The two types of generating functions are related via an arithmetic inner product formula. In addition, an analogue of the classical Siegel-Weil
International Nuclear Information System (INIS)
Haverkamp, U.; Wiezorek, C.; Poetter, R.
1990-01-01
Lyoluminescence dosimetry is based upon light emission during dissolution of previously irradiated dosimetric materials. The lyoluminescence signal is expressed in the dissolution glow curve. These curves begin, depending on the dissolution system, with a high peak followed by an exponentially decreasing intensity. System parameters that influence the graph of the dissolution glow curve, are, for example, injection speed, temperature and pH value of the solution and the design of the dissolution cell. The initial peak does not significantly correlate with the absorbed dose, it is mainly an effect of the injection. The decay of the curve consists of two exponential components: one fast and one slow. The components depend on the absorbed dose and the dosimetric materials used. In particular, the slow component correlates with the absorbed dose. In contrast to the fast component the argument of the exponential function of the slow component is independent of the dosimetric materials investigated: trehalose, glucose and mannitol. The maximum value, following the peak of the curve, and the integral light output are a measure of the absorbed dose. The reason for the different light outputs of various dosimetric materials after irradiation with the same dose is the differing solubility. The character of the dissolution glow curves is the same following irradiation with photons, electrons or neutrons. (author)
Parameter Deduction and Accuracy Analysis of Track Beam Curves in Straddle-type Monorail Systems
Directory of Open Access Journals (Sweden)
Xiaobo Zhao
2015-12-01
Full Text Available The accuracy of the bottom curve of a PC track beam is strongly related to the production quality of the entire beam. Many factors may affect the parameters of the bottom curve, such as the superelevation of the curve and the deformation of a PC track beam. At present, no effective method has been developed to determine the bottom curve of a PC track beam; therefore, a new technique is presented in this paper to deduce the parameters of such a curve and to control the accuracy of the computation results. First, the domain of the bottom curve of a PC track beam is assumed to be a spindle plane. Then, the corresponding supposed top curve domain is determined based on a geometrical relationship that is the opposite of that identified by the conventional method. Second, several optimal points are selected from the supposed top curve domain according to the dichotomy algorithm; the supposed top curve is thus generated by connecting these points. Finally, one rigorous criterion is established in the fractal dimension to assess the accuracy of the assumed top curve deduced in the previous step. If this supposed curve coincides completely with the known top curve, then the assumed bottom curve corresponding to the assumed top curve is considered to be the real bottom curve. This technique of determining the bottom curve of a PC track beam is thus proven to be efficient and accurate.
Curve Digitizer – A software for multiple curves digitizing
Directory of Open Access Journals (Sweden)
Florentin ŞPERLEA
2010-06-01
Full Text Available The Curve Digitizer is software that extracts data from an image file representing a graphicand returns them as pairs of numbers which can then be used for further analysis and applications.Numbers can be read on a computer screen stored in files or copied on paper. The final result is adata set that can be used with other tools such as MSEXCEL. Curve Digitizer provides a useful toolfor any researcher or engineer interested in quantifying the data displayed graphically. The image filecan be obtained by scanning a document
Prospects for PV: a learning curve analysis
International Nuclear Information System (INIS)
Zwaan, Bob van der; Rabi, A.
2003-01-01
This article gives an overview of the current state-of-the-art of photovoltaic electricity technology, and addresses its potential for cost reductions over the first few decades of the 21st century. Current PV production cost ranges are presented, both in terms of capacity installation and electricity generation, of single crystalline silicon, multi-crystalline silicon, amorphous silicon and other thin film technologies. Possible decreases of these costs are assessed, as expected according to the learning-curve methodology. We also estimate how much PV could gain if external costs (due to environmental and health damage) of energy were internalised, for example by an energy tax. Our conclusions are that, (1) mainly due its high costs, PV electricity is unlikely to play a major role in global energy supply and carbon emissions abatement before 2020, (2) extrapolating learning curves observed in the past, one can expect its costs to decrease significantly over the coming years, so that a considerable PV electricity share world-wide could materialise after 2020, (3) niche-market applications, e.g. using stand-alone systems in remote areas, are crucial for continuing 'the ride along the learning curve', (4) damage costs of conventional (fossil) power sources are considerable, and their internalisation would improve the competitiveness of PV, although probably not enough to close the current cost gap. (author)
Factors influencing survival in pre-viable preterm premature rupture of membranes.
Hunter, Tamara Jane; Byrnes, Megan J; Nathan, Elizabeth; Gill, Andy; Pennell, Craig E
2012-09-01
An observational study of a consecutive case series of pre-viable PPROM (16-24 gestational weeks) was performed between 2001 and 2007 in a single tertiary centre to identify factors that predict neonatal survival. Detailed obstetric, ultrasound and neonatal data were abstracted from clinical records. Univariate, multivariate and receiver operator curve (ROC) analyses were performed to identify predictors of neonatal survival to discharge. A total of 143 cases of PPROM were identified. Survival to discharge was less with PPROM at 16-20 weeks than 20-24 weeks (17% versus 39%; p=0.042). GA at PPROM, latency, mode of delivery and electronic foetal monitoring (EFM) were all significant, independent, predictors of survival (p<0.05). Ultrasound assessed amniotic fluid index (AFI) was a poor predictor of survival (area under ROC=0.649, 95% CI=0.532-0.766). A multivariable predictive model, including GA at PPROM, latency, mode of delivery and EFM had an area under the ROC of 0.954 (95% CI=0.916-0.993, sensitivity 97%, specificity 89% and accuracy 92%). Pre-viable PPROM has a poor prognosis, though modern neonatal management techniques may improve survival in late pre-viable PPROM. The predictive model generated from this consecutive case series of this rare condition provides valuable data for counselling patients with this condition.
[Comparison of peritoneal dialysis and hemodialysis survival in Provence-Alpes-Côte d'Azur].
Habib, Aida; Durand, Anne-Claire; Brunet, Philippe; Delarozière, Jean-Christophe; Devictor, Bénédicte; Sambuc, Roland; Gentile, Stéphanie
2016-07-01
To analyze and compare survival of patients initially treated with peritoneal dialysis (PD) or hemodialysis (HD). We used data from the French REIN registry. We included all patients aged 18 years or more who started dialysis between 1st January 2004 and 12 December 2012 in Provence-Alpes-Côte d'Azur Region (PACA). These patients were followed up until 30 June 2014. Survival curves were generated using the Kaplan-Meier technique and tested using the log-rank test. Variables predictive of all-cause mortality were determined using Cox regression models. The propensity score was used. Survival was similar between initial dialysis modalities: PD and HD, even after adjusting for the propensity score. But, when we exclude the patients who had switched from one technique of dialysis to another, survival was better in HD patients. According to the multivariate analysis, advanced age and the lack of walking autonomy appear to be associated with an increase in mortality in dialysis patients. But, the presence of hypertension improve the survival in this cohort. The survival is similar between hemodialysis and peritoneal dialysis. Copyright © 2016 Association Société de néphrologie. Published by Elsevier SAS. All rights reserved.
Analyzing Exoplanet Phase Curve Information Content: Toward Optimized Observing Strategies
Placek, Ben; Angerhausen, Daniel; Knuth, Kevin H.
2017-10-01
Secondary eclipses and phase curves reveal information about the reflectivity and heat distribution in exoplanet atmospheres. The phase curve is composed of a combination of reflected and thermally emitted light from the planet, and for circular orbits the phase curve peaks during the secondary eclipse or at an orbital phase of 0.5. Physical mechanisms have been discovered that shift the phase curve maximum of tidally locked close-in planets to the right, or left, of the secondary eclipse. These mechanisms include cloud formations and atmospheric superrotation, both of which serve to shift the thermally bright hot-spot or highly reflective bright spot of the atmosphere away from the sub-stellar point. Here, we present a methodology for optimizing observing strategies for both secondary eclipses and phase curves with the goal of maximizing the information gained about the planetary atmosphere while minimizing the (assumed) continuous observation time. We show that we can increase the duty cycle of observations aimed at the measurements of phase curve characteristics (amplitude, phase offset) by up to 50% for future platforms such as CHaracterising ExOPlanets Satellite (CHEOPS) and JWST. We apply this methodology to the test cases of the Spitzer phase curve of 55-Cancri-e, which displays an eastward shift in its phase curve maximum as well as model-generated observations of an ultra-short period planet observed with CHEOPS.
Projection of curves on B-spline surfaces using quadratic reparameterization
Yang, Yijun
2010-09-01
Curves on surfaces play an important role in computer aided geometric design. In this paper, we present a hyperbola approximation method based on the quadratic reparameterization of Bézier surfaces, which generates reasonable low degree curves lying completely on the surfaces by using iso-parameter curves of the reparameterized surfaces. The Hausdorff distance between the projected curve and the original curve is controlled under the user-specified distance tolerance. The projected curve is T-G 1 continuous, where T is the user-specified angle tolerance. Examples are given to show the performance of our algorithm. © 2010 Elsevier Inc. All rights reserved.
Laffer Curves and Home Production
Directory of Open Access Journals (Sweden)
Kotamäki Mauri
2017-06-01
Full Text Available In the earlier related literature, consumption tax rate Laffer curve is found to be strictly increasing (see Trabandt and Uhlig (2011. In this paper, a general equilibrium macro model is augmented by introducing a substitute for private consumption in the form of home production. The introduction of home production brings about an additional margin of adjustment – an increase in consumption tax rate not only decreases labor supply and reduces the consumption tax base but also allows a substitution of market goods with home-produced goods. The main objective of this paper is to show that, after the introduction of home production, the consumption tax Laffer curve exhibits an inverse U-shape. Also the income tax Laffer curves are significantly altered. The result shown in this paper casts doubt on some of the earlier results in the literature.
Rational points on elliptic curves
Silverman, Joseph H
2015-01-01
The theory of elliptic curves involves a pleasing blend of algebra, geometry, analysis, and number theory. This book stresses this interplay as it develops the basic theory, thereby providing an opportunity for advanced undergraduates to appreciate the unity of modern mathematics. At the same time, every effort has been made to use only methods and results commonly included in the undergraduate curriculum. This accessibility, the informal writing style, and a wealth of exercises make Rational Points on Elliptic Curves an ideal introduction for students at all levels who are interested in learning about Diophantine equations and arithmetic geometry. Most concretely, an elliptic curve is the set of zeroes of a cubic polynomial in two variables. If the polynomial has rational coefficients, then one can ask for a description of those zeroes whose coordinates are either integers or rational numbers. It is this number theoretic question that is the main subject of this book. Topics covered include the geometry and ...
The New Keynesian Phillips Curve
DEFF Research Database (Denmark)
Ólafsson, Tjörvi
This paper provides a survey on the recent literature on the new Keynesian Phillips curve: the controversies surrounding its microfoundation and estimation, the approaches that have been tried to improve its empirical fit and the challenges it faces adapting to the open-economy framework. The new...... Keynesian Phillips curve has been severely criticized for poor empirical dynamics. Suggested improvements involve making some adjustments to the standard sticky price framework, e.g. introducing backwardness and real rigidities, or abandoning the sticky price model and relying on models of inattentiveness......, learning or state-dependant pricing. The introduction of openeconomy factors into the new Keynesian Phillips curve complicate matters further as it must capture the nexus between price setting, inflation and the exchange rate. This is nevertheless a crucial feature for any model to be used for inflation...
DEFF Research Database (Denmark)
Brücker, Herbert; Jahn, Elke J.
Based on a wage curve approach we examine the labor market effects of migration in Germany. The wage curve relies on the assumption that wages respond to a change in the unemployment rate, albeit imperfectly. This allows one to derive the wage and employment effects of migration simultaneously...... with a vocational degree. The wage and employment effects of migration are moderate: a 1 percent increase in the German labor force through immigration increases the aggregate unemployment rate by less than 0.1 percentage points and reduces average wages by less 0.1 percent. While native workers benefit from...... increased wages and lower unemployment, foreign workers are adversely affected....
Shock detachment from curved wedges
Mölder, S.
2017-09-01
Curved shock theory is used to show that the flow behind attached shocks on doubly curved wedges can have either positive or negative post-shock pressure gradients depending on the freestream Mach number, the wedge angle and the two wedge curvatures. Given enough wedge length, the flow near the leading edge can choke to force the shock to detach from the wedge. This local choking can preempt both the maximum deflection and the sonic criteria for shock detachment. Analytical predictions for detachment by local choking are supported by CFD results.
Analysis of power curves of Danish and foreign wind turbines
International Nuclear Information System (INIS)
Petersen, H.
1995-12-01
This report describes an analysis of power curves for a number of wind turbines, 30 Danish and 17 foreign - European - wind turbines. The investigation is limited to wind turbines of 150 kW capacity and greater, and to wind turbines for which a power curve is available. The power curves are transformed into a common, uniform presentation in order to facilitate the succeeding treatment, which primarily is the calculation of the production of electrical energy yielded per year. From the known data of the wind turbine, equipped generator power and rotor area and the area swept by the blades, the specific electrical production is calculated in three terms: yield per square meter of rotor area, yield per kW generator power and yield per square meter and per kilowatt generator power. Based on these findings a number of comparisons are established, such as comparisons of conceptual designs and technical- economical evaluations. (au)
Dual Smarandache Curves of a Timelike Curve lying on Unit dual Lorentzian Sphere
Kahraman, Tanju; Hüseyin Ugurlu, Hasan
2016-01-01
In this paper, we give Darboux approximation for dual Smarandache curves of time like curve on unit dual Lorentzian sphere. Firstly, we define the four types of dual Smarandache curves of a timelike curve lying on dual Lorentzian sphere.
Archaeomagnetic SV curve for Belgium
Ech-chakrouni, Souad; Hus, Jozef
2017-04-01
Archaeomagnetic secular variation curves have been established for different countries in Europe, especially when different archeological sites are more or less uniformly distributed in time are available. The disadvantage in that case is that data had to be relocated to a single reference site. The proximity of the reference locality Paris to Belgium makes that we used the French archaeomagnetic SV curve for the last three millennia up to the present for archaeomagnetic dating undated baked structures. In total, 85 baked structures have been examined, unearthed in 24 archaeological sites of the territory of Belgium. The ChRM of each sample was obtained by principal component analysis for at least three demagnetisation steps (Kirschvink 1980). Except for some outliers, the ChRM directions are very coherent with a high confidence factor (α95archaeomagnetism. At present, only six baked structures were dated radiometrically and may be considered as reference data for a limited area about 30500 km2 in Western Europe. The ultimate aim is to construct an archaeomagnetic SV curve for Belgium with Uccle as reference locality, where the first measurement of the geomagnetic field was done in 1895. This curve would include all the available reference data in a radius of about 500 km around Uccle. Keywords: secular variation, archaeomagnetic dating, Belgium.
The aeolian dust accumulation curve
Goossens, D.
2001-01-01
This article presents a simple physical concept of aeolian dust accumulation, based on the behaviour of the subprocesses of dust deposition and dust erosion. The concept is tested in an aeolian dust wind tunnel. The agreement between the accumulation curve predicted by the model and the accumulation
2013-01-01
This software can be used to assist with the assessment of margin of safety for a horizontal curve. It is intended for use by engineers and technicians responsible for safety analysis or management of rural highway pavement or traffic control devices...
Ultrasonic Fetal Cephalometry: Percentiles Curve
Flamme, P.
1972-01-01
Measurements by ultrasound of the biparietal diameter of the fetal head during pregnancy are a reliable guide to fetal growth. As a ready means of comparison with the normal we constructed from 4,170 measurements in 1,394 cases a curve showing the percentiles distribution of biparietal diameters for each week of gestation. PMID:5070162
Interpolation and Polynomial Curve Fitting
Yang, Yajun; Gordon, Sheldon P.
2014-01-01
Two points determine a line. Three noncollinear points determine a quadratic function. Four points that do not lie on a lower-degree polynomial curve determine a cubic function. In general, n + 1 points uniquely determine a polynomial of degree n, presuming that they do not fall onto a polynomial of lower degree. The process of finding such a…
Directory of Open Access Journals (Sweden)
Wagner P. B.
2006-11-01
Full Text Available When the drainage area of a flowing well is long and narrow, the pressure transient behavior of the well often cannot be analyzed by conventional means. Well tests which appear to exhibit linear flow behavior for extended periods, beyond the length of time which could be attributed to flow to a fracture, have been observed for both geothermal wells and for oil and gas wells. In geothermal formations and in some of the deep low-permeability gas fields the elongated reservoir shape results from long parallel faults which appear to bound the formations. Typically such wells are also penetrating natural fractures. In other reservoirs the elongated drainage shape is due to the river delta or alluvial environment in which the reservoir sands were originally deposited. Using a recently developed scheme for custom type curve generation for a wide variety of flow geometries, the particular behavior of the well producing from an elongated linear flow system is presented in detail. Cases examined include fractured wells of variable fracture length in varions positions within the flow channel and also of variable length. The effects of partial penetration are also demonstrated. This paper illustrates the use of custom type curves in computer-aided type-curve matching. With the help of relatively inexpensive computer graphics, custom type curves are displayed which exactly represent whatever is known about a particular drainage geometry, including such variables as formation thickness and areal extent, fracture length, partial penetration, and well location. Familles of curves can be generated and displayed along with the data to help determine unknown features of the reservoir geometry. An important contribution included in this work was the development of a set of orthogonal dimensionless parameters which facilitate the generation of familles of type curves which vary one reservoir shape parameter with implied effects on other parameters. The dimensionless
Symmetric digit sets for elliptic curve scalar multiplication without precomputation.
Heuberger, Clemens; Mazzoli, Michela
2014-08-28
We describe a method to perform scalar multiplication on two classes of ordinary elliptic curves, namely [Formula: see text] in prime characteristic [Formula: see text], and [Formula: see text] in prime characteristic [Formula: see text]. On these curves, the 4-th and 6-th roots of unity act as (computationally efficient) endomorphisms. In order to optimise the scalar multiplication, we consider a width- w -NAF (Non-Adjacent Form) digit expansion of positive integers to the complex base of τ , where τ is a zero of the characteristic polynomial [Formula: see text] of the Frobenius endomorphism associated to the curve. We provide a precomputationless algorithm by means of a convenient factorisation of the unit group of residue classes modulo τ in the endomorphism ring, whereby we construct a digit set consisting of powers of subgroup generators, which are chosen as efficient endomorphisms of the curve.
Marginal abatement cost curves for Heavy Duty Vehicles. Background report
Energy Technology Data Exchange (ETDEWEB)
Schroten, A.; Warringa, G.; Bles, M.
2012-09-15
Cost curves were calculated for CO2 abatement technologies for Heavy Duty Vehicles. These curves were elaborated for eight different vehicle categories (six categories of truck and two subcategories), as well as for an 'average' truck and bus. Given that cost curves depend very much on underlying assumptions, the MACH model (Marginal Abatement Costs of Heavy duty vehicles) was developed. This model allows users to enter their own assumptions with respect to parameters like fuel prices and cost and lifetime of individual technologies, with the model then generating new cost curves for the various vehicle categories. This background report contains a description of the model and a summary of the results of several model runs.
A catalog of special plane curves
Lawrence, J Dennis
2014-01-01
Among the largest, finest collections available-illustrated not only once for each curve, but also for various values of any parameters present. Covers general properties of curves and types of derived curves. Curves illustrated by a CalComp digital incremental plotter. 12 illustrations.
Computation of undulator tuning curves
International Nuclear Information System (INIS)
Dejus, Roger J.
1997-01-01
Computer codes for fast computation of on-axis brilliance tuning curves and flux tuning curves have been developed. They are valid for an ideal device (regular planar device or a helical device) using the Bessel function formalism. The effects of the particle beam emittance and the beam energy spread on the spectrum are taken into account. The applicability of the codes and the importance of magnetic field errors of real insertion devices are addressed. The validity of the codes has been experimentally verified at the APS and observed discrepancies are in agreement with predicted reduction of intensities due to magnetic field errors. The codes are distributed as part of the graphical user interface XOP (X-ray OPtics utilities), which simplifies execution and viewing of the results
Invariance for Single Curved Manifold
Castro, Pedro Machado Manhaes de
2012-08-01
Recently, it has been shown that, for Lambert illumination model, solely scenes composed by developable objects with a very particular albedo distribution produce an (2D) image with isolines that are (almost) invariant to light direction change. In this work, we provide and investigate a more general framework, and we show that, in general, the requirement for such in variances is quite strong, and is related to the differential geometry of the objects. More precisely, it is proved that single curved manifolds, i.e., manifolds such that at each point there is at most one principal curvature direction, produce invariant is surfaces for a certain relevant family of energy functions. In the three-dimensional case, the associated energy function corresponds to the classical Lambert illumination model with albedo. This result is also extended for finite-dimensional scenes composed by single curved objects. © 2012 IEEE.
A curved resonant flexoelectric actuator
Zhang, Shuwen; Liu, Kaiyuan; Xu, Minglong; Shen, Shengping
2017-08-01
Flexoelectricity is an electro-mechanical coupling effect that exists in all dielectrics and has the potential to replace piezoelectric actuating on the microscale. In this letter, a curved flexoelectric actuator with non-polarized polyvinylidene fluoride is presented and shown to exhibit good electro-mechanical properties. This provides experimental support for a body of theoretical research into converse flexoelectricity in polymeric materials. In addition, this work demonstrates the feasibility of lead-free microscale actuating without piezoelectricity.
Active Particles on Curved Surfaces
Fily, Yaouen; Baskaran, Aparna; Hagan, Michael F.
2016-01-01
Recent studies have highlighted the sensitivity of active matter to boundaries and their geometries. Here we develop a general theory for the dynamics and statistics of active particles on curved surfaces and illustrate it on two examples. We first show that active particles moving on a surface with no ability to probe its curvature only exhibit steady-state inhomogeneities in the presence of orientational order. We then consider a strongly confined 3D ideal active gas and compute its steady-...
Growth curves for Laron syndrome.
Laron, Z; Lilos, P; Klinger, B
1993-06-01
Growth curves for children with Laron syndrome were constructed on the basis of repeated measurements made throughout infancy, childhood, and puberty in 24 (10 boys, 14 girls) of the 41 patients with this syndrome investigated in our clinic. Growth retardation was already noted at birth, the birth length ranging from 42 to 46 cm in the 12/20 available measurements. The postnatal growth curves deviated sharply from the normal from infancy on. Both sexes showed no clear pubertal spurt. Girls completed their growth between the age of 16-19 years to a final mean (SD) height of 119 (8.5) cm whereas the boys continued growing beyond the age of 20 years, achieving a final height of 124 (8.5) cm. At all ages the upper to lower body segment ratio was more than 2 SD above the normal mean. These growth curves constitute a model not only for primary, hereditary insulin-like growth factor-I (IGF-I) deficiency (Laron syndrome) but also for untreated secondary IGF-I deficiencies such as growth hormone gene deletion and idiopathic congenital isolated growth hormone deficiency. They should also be useful in the follow up of children with Laron syndrome treated with biosynthetic recombinant IGF-I.
Projection-based curve clustering
International Nuclear Information System (INIS)
Auder, Benjamin; Fischer, Aurelie
2012-01-01
This paper focuses on unsupervised curve classification in the context of nuclear industry. At the Commissariat a l'Energie Atomique (CEA), Cadarache (France), the thermal-hydraulic computer code CATHARE is used to study the reliability of reactor vessels. The code inputs are physical parameters and the outputs are time evolution curves of a few other physical quantities. As the CATHARE code is quite complex and CPU time-consuming, it has to be approximated by a regression model. This regression process involves a clustering step. In the present paper, the CATHARE output curves are clustered using a k-means scheme, with a projection onto a lower dimensional space. We study the properties of the empirically optimal cluster centres found by the clustering method based on projections, compared with the 'true' ones. The choice of the projection basis is discussed, and an algorithm is implemented to select the best projection basis among a library of orthonormal bases. The approach is illustrated on a simulated example and then applied to the industrial problem. (authors)
Dual Smarandache Curves and Smarandache Ruled Surfaces
Tanju KAHRAMAN; Mehmet ÖNDER; H. Hüseyin UGURLU
2013-01-01
In this paper, by considering dual geodesic trihedron (dual Darboux frame) we define dual Smarandache curves lying fully on dual unit sphere S^2 and corresponding to ruled surfaces. We obtain the relationships between the elements of curvature of dual spherical curve (ruled surface) x(s) and its dual Smarandache curve (Smarandache ruled surface) x1(s) and we give an example for dual Smarandache curves of a dual spherical curve.
Parametrizations of elliptic curves by Shimura curves and by classical modular curves.
Ribet, K A; Takahashi, S
1997-10-14
Fix an isogeny class of semistable elliptic curves over Q. The elements A of have a common conductor N, which is a square-free positive integer. Let D be a divisor of N which is the product of an even number of primes--i.e., the discriminant of an indefinite quaternion algebra over Q. To D we associate a certain Shimura curve X(0)D(N/D), whose Jacobian is isogenous to an abelian subvariety of J0(N). There is a unique A [symbol; see text] A in for which one has a nonconstant map piD : X(0)D(N/D) --> A whose pullback A --> Pic0(X(0)D(N/D)) is injective. The degree of piD is an integer deltaD which depends only on D (and the fixed isogeny class A). We investigate the behavior of deltaD as D varies.
Synthesis and analysis of coupler curves with combined planar cam ...
African Journals Online (AJOL)
Cam and follower mechanisms are widely used to convert a rotary input motion into a controlled reciprocating or oscillating motion as output in machines or robots. As this mechanism has an ability to provide unlimited variety of output motions. Many works are done on the synthesis of coupler curves or path generation ...
Distribution of some sequences of points on elliptic curves
DEFF Research Database (Denmark)
Lange, Tanja; Shparlinski, Igor
2007-01-01
We estimate character sums over points on elliptic curves over a finite field of q elements. Pseudorandom sequences can be constructed by taking linear combinations with small coefficients (for example, from the set {−1, 0, 1}) of a fixed vector of points, which forms the seed of the generator. We...
Stress-Strain Curves for High-Performance Fiber Reinforced ...
African Journals Online (AJOL)
Steel fiber reinforced concrete (SFRC) is increasingly being used day by day as a structural material for various applications. The complete stress-strain curve of this material in compression is needed for the analysis and design of structural elements. An experimental investigation was carried out to generate the complete ...
Leptogenesis from loop effects in curved spacetime
Energy Technology Data Exchange (ETDEWEB)
McDonald, Jamie I.; Shore, Graham M. [Department of Physics, Swansea University,Singleton Park, Swansea, SA2 8PP (United Kingdom)
2016-04-05
We describe a new mechanism — radiatively-induced gravitational leptogenesis — for generating the matter-antimatter asymmetry of the Universe. We show how quantum loop effects in C and CP violating theories cause matter and antimatter to propagate differently in the presence of gravity, and prove this is forbidden in flat space by CPT and translation symmetry. This generates a curvature-dependent chemical potential for leptons, allowing a matter-antimatter asymmetry to be generated in thermal equilibrium in the early Universe. The time-dependent dynamics necessary for leptogenesis is provided by the interaction of the virtual self-energy cloud of the leptons with the expanding curved spacetime background, which violates the strong equivalence principle and allows a distinction between matter and antimatter. We show here how this mechanism is realised in a particular BSM theory, the see-saw model, where the quantum loops involve the heavy sterile neutrinos responsible for light neutrino masses. We demonstrate by explicit computation of the relevant two-loop Feynman diagrams how the size of the radiative corrections relevant for leptogenesis becomes enhanced by increasing the mass hierarchy of the sterile neutrinos, and show how the induced lepton asymmetry may be sufficiently large to play an important rôle in determining the baryon-to-photon ratio of the Universe.
A note on families of fragility curves
International Nuclear Information System (INIS)
Kaplan, S.; Bier, V.M.; Bley, D.C.
1989-01-01
In the quantitative assessment of seismic risk, uncertainty in the fragility of a structural component is usually expressed by putting forth a family of fragility curves, with probability serving as the parameter of the family. Commonly, a lognormal shape is used both for the individual curves and for the expression of uncertainty over the family. A so-called composite single curve can also be drawn and used for purposes of approximation. This composite curve is often regarded as equivalent to the mean curve of the family. The equality seems intuitively reasonable, but according to the authors has never been proven. The paper presented proves this equivalence hypothesis mathematically. Moreover, the authors show that this equivalence hypothesis between fragility curves is itself equivalent to an identity property of the standard normal probability curve. Thus, in the course of proving the fragility curve hypothesis, the authors have also proved a rather obscure, but interesting and perhaps previously unrecognized, property of the standard normal curve
NLINEAR - NONLINEAR CURVE FITTING PROGRAM
Everhart, J. L.
1994-01-01
A common method for fitting data is a least-squares fit. In the least-squares method, a user-specified fitting function is utilized in such a way as to minimize the sum of the squares of distances between the data points and the fitting curve. The Nonlinear Curve Fitting Program, NLINEAR, is an interactive curve fitting routine based on a description of the quadratic expansion of the chi-squared statistic. NLINEAR utilizes a nonlinear optimization algorithm that calculates the best statistically weighted values of the parameters of the fitting function and the chi-square that is to be minimized. The inputs to the program are the mathematical form of the fitting function and the initial values of the parameters to be estimated. This approach provides the user with statistical information such as goodness of fit and estimated values of parameters that produce the highest degree of correlation between the experimental data and the mathematical model. In the mathematical formulation of the algorithm, the Taylor expansion of chi-square is first introduced, and justification for retaining only the first term are presented. From the expansion, a set of n simultaneous linear equations are derived, which are solved by matrix algebra. To achieve convergence, the algorithm requires meaningful initial estimates for the parameters of the fitting function. NLINEAR is written in Fortran 77 for execution on a CDC Cyber 750 under NOS 2.3. It has a central memory requirement of 5K 60 bit words. Optionally, graphical output of the fitting function can be plotted. Tektronix PLOT-10 routines are required for graphics. NLINEAR was developed in 1987.
Differential geometry curves, surfaces, manifolds
Kühnel, Wolfgang
2015-01-01
This carefully written book is an introduction to the beautiful ideas and results of differential geometry. The first half covers the geometry of curves and surfaces, which provide much of the motivation and intuition for the general theory. The second part studies the geometry of general manifolds, with particular emphasis on connections and curvature. The text is illustrated with many figures and examples. The prerequisites are undergraduate analysis and linear algebra. This new edition provides many advancements, including more figures and exercises, and-as a new feature-a good number of so
LINS Curve in Romanian Economy
Directory of Open Access Journals (Sweden)
Emilian Dobrescu
2016-02-01
Full Text Available The paper presents theoretical considerations and empirical evidence to test the validity of the Laffer in Narrower Sense (LINS curve as a parabola with a maximum. Attention is focused on the so-called legal-effective tax gap (letg. The econometric application is based on statistical data (1990-2013 for Romania as an emerging European economy. Three cointegrating regressions (fully modified least squares, canonical cointegrating regression and dynamic least squares and three algorithms, which are based on instrumental variables (two-stage least squares, generalized method of moments, and limited information maximum likelihood, are involved.
Principal Curves on Riemannian Manifolds
DEFF Research Database (Denmark)
Hauberg, Søren
2015-01-01
Euclidean statistics are often generalized to Riemannian manifolds by replacing straight-line interpolations with geodesic ones. While these Riemannian models are familiar-looking, they are restricted by the inflexibility of geodesics, and they rely on constructions which are optimal only...... in Euclidean domains. We consider extensions of Principal Component Analysis (PCA) to Riemannian manifolds. Classic Riemannian approaches seek a geodesic curve passing through the mean that optimize a criteria of interest. The requirements that the solution both is geodesic and must pass through the mean tend...
Lightlike contractions in curved spacetime
International Nuclear Information System (INIS)
Aichelburg, P.C.; Embacher, F.
1984-01-01
The technique of lightlike contractions in flat and curved space is described. The method consists in boosting a classical field configuration to the velocity of light by an appropriate generalized Lorentz transformation. Within this framework the gravitational field of a massless neutral particle is a meaningful concept. For electrically charged particles, however, the field equations seem to prevent an analogous procedure. We thus conjecture that general relativity forbids the existance of charged point particles moving with the velocity of light. Further examples for lightlike contractions of a self-dual electromagnetic field and of a linearized Rarita-Schwinger (spin-3/2) field are given. (Author)
Comparison of two methods to determine fan performance curves using computational fluid dynamics
Onma, Patinya; Chantrasmi, Tonkid
2018-01-01
This work investigates a systematic numerical approach that employs Computational Fluid Dynamics (CFD) to obtain performance curves of a backward-curved centrifugal fan. Generating the performance curves requires a number of three-dimensional simulations with varying system loads at a fixed rotational speed. Two methods were used and their results compared to experimental data. The first method incrementally changes the mass flow late through the inlet boundary condition while the second method utilizes a series of meshes representing the physical damper blade at various angles. The generated performance curves from both methods are compared with an experiment setup in accordance with the AMCA fan performance testing standard.
Energy Technology Data Exchange (ETDEWEB)
NONE
1975-05-30
This report composed of 6 parts summarizes the fiscal 1974 Sunshine Project research result on the solar heat power generation system with a curved reflector light collection system. Part 1 outlines the research target, research result and research system. Part 2 describes each research item in detail. This part on system and hardware researches is composed of (1) study on 1,000kW system, (2) development of plane/parabolic reflector light collection equipment, (3) development of parabolic reflector light collection equipment, (4) development of selective transparent membrane and selective absorption surface, and (5) study on heat storage equipment and heat exchange equipment. Part 3 describes the future R and D plan for every year focusing the fiscal 1975 R and D plan. Part 4 describes various cooperative activities with other research groups such as various committees related to the Sunshine Project, universities and Electrotechnical Laboratory. Part 5 describes several patents produced during this R and D. Part 6 summarizes the results on this R and D. (NEDO)
Differential geometry and topology of curves
Animov, Yu
2001-01-01
Differential geometry is an actively developing area of modern mathematics. This volume presents a classical approach to the general topics of the geometry of curves, including the theory of curves in n-dimensional Euclidean space. The author investigates problems for special classes of curves and gives the working method used to obtain the conditions for closed polygonal curves. The proof of the Bakel-Werner theorem in conditions of boundedness for curves with periodic curvature and torsion is also presented. This volume also highlights the contributions made by great geometers. past and present, to differential geometry and the topology of curves.
Survival From Childhood Hematological Malignancies in Denmark
DEFF Research Database (Denmark)
Erdmann, Friederike; Winther, Jeanette Falck; Dalton, Susanne Oksbjerg
2016-01-01
in children with hematological malignancies. RESULTS: Having siblings and increasing birth order were associated with reduced survival from acute lymphoblastic leukemia (ALL) and acute myeloid leukemia (AML). Associations with AML were strongest and statistically significant. HRs of 1.62 (CI 0.85; 3.09) and 5...... with a hematological malignancy before the age of 20 years (N = 1,819) were followed until 10 years from diagnosis. Kaplan-Meier curves and Cox proportional hazards models estimating hazard ratios (HR) and 95% confidence intervals (CI) were used to assess the impact of family characteristics on overall survival...
Classical optics and curved spaces
International Nuclear Information System (INIS)
Bailyn, M.; Ragusa, S.
1976-01-01
In the eikonal approximation of classical optics, the unit polarization 3-vector of light satisfies an equation that depends only on the index, n, of refraction. It is known that if the original 3-space line element is d sigma 2 , then this polarization direction propagates parallely in the fictitious space n 2 d sigma 2 . Since the equation depends only on n, it is possible to invent a fictitious curved 4-space in which the light performs a null geodesic, and the polarization 3-vector behaves as the 'shadow' of a parallely propagated 4-vector. The inverse, namely, the reduction of Maxwell's equation, on a curve 'dielectric free) space, to a classical space with dielectric constant n=(-g 00 ) -1 / 2 is well known, but in the latter the dielectric constant epsilon and permeability μ must also equal (-g 00 ) -1 / 2 . The rotation of polarization as light bends around the sun by utilizing the reduction to the classical space, is calculated. This (non-) rotation may then be interpreted as parallel transport in the 3-space n 2 d sigma 2 [pt
Deformation Based Curved Shape Representation.
Demisse, Girum G; Aouada, Djamila; Ottersten, Bjorn
2017-06-02
In this paper, we introduce a deformation based representation space for curved shapes in Rn. Given an ordered set of points sampled from a curved shape, the proposed method represents the set as an element of a finite dimensional matrix Lie group. Variation due to scale and location are filtered in a preprocessing stage, while shapes that vary only in rotation are identified by an equivalence relationship. The use of a finite dimensional matrix Lie group leads to a similarity metric with an explicit geodesic solution. Subsequently, we discuss some of the properties of the metric and its relationship with a deformation by least action. Furthermore, invariance to reparametrization or estimation of point correspondence between shapes is formulated as an estimation of sampling function. Thereafter, two possible approaches are presented to solve the point correspondence estimation problem. Finally, we propose an adaptation of k-means clustering for shape analysis in the proposed representation space. Experimental results show that the proposed representation is robust to uninformative cues, e.g. local shape perturbation and displacement. In comparison to state of the art methods, it achieves a high precision on the Swedish and the Flavia leaf datasets and a comparable result on MPEG-7, Kimia99 and Kimia216 datasets.
Smarandache Curves In Terms of Sabban Frame of Fixed Pole Curve
Directory of Open Access Journals (Sweden)
Süleyman Şenyurt
2016-06-01
Full Text Available In this paper, we study the special Smarandache curve interms of Sabban frame of Fixed Pole curve and we give some characterization of Smarandache curves. Besides, we illustrate examples of our results.
Classical black holes: the nonlinear dynamics of curved spacetime.
Thorne, Kip S
2012-08-03
Numerical simulations have revealed two types of physical structures, made from curved spacetime, that are attached to black holes: tendexes, which stretch or squeeze anything they encounter, and vortexes, which twist adjacent inertial frames relative to each other. When black holes collide, their tendexes and vortexes interact and oscillate (a form of nonlinear dynamics of curved spacetime). These oscillations generate gravitational waves, which can give kicks up to 4000 kilometers per second to the merged black hole. The gravitational waves encode details of the spacetime dynamics and will soon be observed and studied by the Laser Interferometer Gravitational Wave Observatory and its international partners.
Transition curves for highway geometric design
Kobryń, Andrzej
2017-01-01
This book provides concise descriptions of the various solutions of transition curves, which can be used in geometric design of roads and highways. It presents mathematical methods and curvature functions for defining transition curves. .
2002-01-01
The Atlas of Stress-Strain Curves, Second Edition is substantially bigger in page dimensions, number of pages, and total number of curves than the previous edition. It contains over 1,400 curves, almost three times as many as in the 1987 edition. The curves are normalized in appearance to aid making comparisons among materials. All diagrams include metric (SI) units, and many also include U.S. customary units. All curves are captioned in a consistent format with valuable information including (as available) standard designation, the primary source of the curve, mechanical properties (including hardening exponent and strength coefficient), condition of sample, strain rate, test temperature, and alloy composition. Curve types include monotonic and cyclic stress-strain, isochronous stress-strain, and tangent modulus. Curves are logically arranged and indexed for fast retrieval of information. The book also includes an introduction that provides background information on methods of stress-strain determination, on...
Integration over Tropical Plane Curves and Ultradiscretization
Iwao, Shinsuke
2008-01-01
In this article we study holomorphic integrals on tropical plane curves in view of ultradiscretization. We prove that the lattice integrals over tropical curves can be obtained as a certain limit of complex integrals over Riemannian surfaces.
Survival pathways under stress
Indian Academy of Sciences (India)
First page Back Continue Last page Graphics. Survival pathways under stress. Bacteria survive by changing gene expression. pattern. Three important pathways will be discussed: Stringent response. Quorum sensing. Proteins performing function to control oxidative damage.
Estimation method of the fracture resistance curve
Energy Technology Data Exchange (ETDEWEB)
Cho, Sung Keun; Lee, Kwang Hyeon; Koo, Jae Mean; Seok, Chang Sung [Sungkyunkwan Univ., Suwon (Korea, Republic of); Park, Jae Sil [Samsung Electric Company, Suwon (Korea, Republic of)
2008-07-01
Fracture resistance curves for concerned materials are required in order to perform elastic-plastic fracture mechanical analysis. Fracture resistance curve is built with J-integral values and crack extension values. The objective of this paper is to propose the estimation method of the fracture resistance curve. The estimation method of the fracture resistance curve for the pipe specimen was proposed by the load ratio method from load - displacement data for the standard specimen.
M-curves and symmetric products
Indian Academy of Sciences (India)
Indranil Biswas
2017-08-03
Aug 3, 2017 ... Since M-curves play a special role in the topology of real algebraic varieties, it is useful to have a criterion for M-curves. It was proved earlier that a curve defined over R is an. M-curve if and only if its Jacobian is an M-variety [5]. We use this result of [5] and the. Picard bundle to prove that the n-th symmetric ...
Modeling fertility curves in Africa
Directory of Open Access Journals (Sweden)
Ezra Gayawan
2010-02-01
Full Text Available The modeling of fertility patterns is an essential method researchers use to understand world-wide population patterns. Various types of fertility models have been reported in the literature to capture the patterns specific to developed countries. While much effort has been put into reducing fertility rates in Africa, models which describe the fertility patterns have not been adequately described. This article presents a flexible parametric model that can adequately capture the varying patterns of the age-specific fertility curves of African countries. The model has parameters that are interpretable in terms of demographic indices. The performance of this model was compared with other commonly used models and Akaike's Information Criterion was used for selecting the model with best fit. The presented model was able to reproduce the empirical fertility data of 11 out of 15 countries better than the other models considered.
Ait-Haddou, Rachid
2013-02-01
We show that the generalized Bernstein bases in Müntz spaces defined by Hirschman and Widder (1949) and extended by Gelfond (1950) can be obtained as pointwise limits of the Chebyshev–Bernstein bases in Müntz spaces with respect to an interval [a,1][a,1] as the positive real number a converges to zero. Such a realization allows for concepts of curve design such as de Casteljau algorithm, blossom, dimension elevation to be transferred from the general theory of Chebyshev blossoms in Müntz spaces to these generalized Bernstein bases that we termed here as Gelfond–Bernstein bases. The advantage of working with Gelfond–Bernstein bases lies in the simplicity of the obtained concepts and algorithms as compared to their Chebyshev–Bernstein bases counterparts.
Euler characteristics and elliptic curves.
Coates, J; Howson, S
1997-10-14
Let E be a modular elliptic curve over [symbol, see text], without complex multiplication; let p be a prime number where E has good ordinary reduction; and let Finfinity be the field obtained by adjoining [symbol, see text] to all p-power division points on E. Write Ginfinity for the Galois group of Finfinity over [symbol, see text]. Assume that the complex L-series of E over [symbol, see text] does not vanish at s = 1. If p >/= 5, we make a precise conjecture about the value of the Ginfinity-Euler characteristic of the Selmer group of E over Finfinity. If one makes a standard conjecture about the behavior of this Selmer group as a module over the Iwasawa algebra, we are able to prove our conjecture. The crucial local calculations in the proof depend on recent joint work of the first author with R. Greenberg.
Separation control on curved boundaries
Kamal Kumar, R.; Mathur, Manikandan
2017-11-01
Flow separation and its characteristics are an important consideration in the field of bluff body aerodynamics. Specifically, the location and slope of the separation, and the size of the re-circulation bubble that forms downstream of the bluff body significantly affect the resulting aerodynamic forces. Recent theories based on dynamical systems (Haller, 2004) have established criteria based on wall-based quantities that identify the location and slope of separation in unsteady flows. In this work, we adapt the closed-loop separation control algorithm proposed by Alam, Liu & Haller (2006) to curved boundaries, and demonstrate the effectiveness of the same via numerical simulations on the flow past a cylinder in the vortex-shedding regime. Using appropriately placed wall-based actuators that use inputs from shear stress sensors placed between the actuators, we demonstrate that the separation characteristics including the re-circulation bubble length, can be desirably modified.
Bacterial streamers in curved microchannels
Rusconi, Roberto; Lecuyer, Sigolene; Guglielmini, Laura; Stone, Howard
2009-11-01
Biofilms, generally identified as microbial communities embedded in a self-produced matrix of extracellular polymeric substances, are involved in a wide variety of health-related problems ranging from implant-associated infections to disease transmissions and dental plaque. The usual picture of these bacterial films is that they grow and develop on surfaces. However, suspended biofilm structures, or streamers, have been found in natural environments (e.g., rivers, acid mines, hydrothermal hot springs) and are always suggested to stem from a turbulent flow. We report the formation of bacterial streamers in curved microfluidic channels. By using confocal laser microscopy we are able to directly image and characterize the spatial and temporal evolution of these filamentous structures. Such streamers, which always connect the inner corners of opposite sides of the channel, are always located in the middle plane. Numerical simulations of the flow provide evidences for an underlying hydrodynamic mechanism behind the formation of the streamers.
AKLSQF - LEAST SQUARES CURVE FITTING
Kantak, A. V.
1994-01-01
The Least Squares Curve Fitting program, AKLSQF, computes the polynomial which will least square fit uniformly spaced data easily and efficiently. The program allows the user to specify the tolerable least squares error in the fitting or allows the user to specify the polynomial degree. In both cases AKLSQF returns the polynomial and the actual least squares fit error incurred in the operation. The data may be supplied to the routine either by direct keyboard entry or via a file. AKLSQF produces the least squares polynomial in two steps. First, the data points are least squares fitted using the orthogonal factorial polynomials. The result is then reduced to a regular polynomial using Sterling numbers of the first kind. If an error tolerance is specified, the program starts with a polynomial of degree 1 and computes the least squares fit error. The degree of the polynomial used for fitting is then increased successively until the error criterion specified by the user is met. At every step the polynomial as well as the least squares fitting error is printed to the screen. In general, the program can produce a curve fitting up to a 100 degree polynomial. All computations in the program are carried out under Double Precision format for real numbers and under long integer format for integers to provide the maximum accuracy possible. AKLSQF was written for an IBM PC X/AT or compatible using Microsoft's Quick Basic compiler. It has been implemented under DOS 3.2.1 using 23K of RAM. AKLSQF was developed in 1989.
Sibling curves of quadratic polynomials | Wiggins | Quaestiones ...
African Journals Online (AJOL)
Sibling curves were demonstrated in [1, 2] as a novel way to visualize the zeroes of real valued functions. In [3] it was shown that a polynomial of degree n has n sibling curves. This paper focuses on the algebraic and geometric properites of the sibling curves of real and complex quadratic polynomials. Key words: Quadratic ...
Legendre Elliptic Curves over Finite Fields
Auer, Roland; Top, Jakob
2002-01-01
We show that every elliptic curve over a finite field of odd characteristic whose number of rational points is divisible by 4 is isogenous to an elliptic curve in Legendre form, with the sole exception of a minimal respectively maximal elliptic curve. We also collect some results concerning the
Trigonometric Characterization of Some Plane Curves
Indian Academy of Sciences (India)
IAS Admin
(Figure 1). A relation between tan θ and tanψ gives the trigonometric equation of the family of curves. In this article, trigonometric equations of some known plane curves are deduced and it is shown that these equations reveal some geometric characteristics of the families of the curves under consideration. In Section 2,.
Holomorphic curves in exploded manifolds: Kuranishi structure
Parker, Brett
2013-01-01
This paper constructs a Kuranishi structure for the moduli stack of holomorphic curves in exploded manifolds. To avoid some technicalities of abstract Kuranishi structures, we embed our Kuranishi structure inside a moduli stack of curves. The construction also works for the moduli stack of holomorphic curves in any compact symplectic manifold.
Effect of the interaction among traps on the shape of thermoluminescence glow curves
International Nuclear Information System (INIS)
Marcazzo, J.; Santiago, M.; Spano, F.; Lester, M.; Ortega, F.; Molina, P.; Caselli, E.
2007-01-01
The effect of the interaction among traps on the structure of thermoluminescence glow curves has been investigated by generating numerically simulated glow curves for a wide range of trap parameters. The results reported in this paper provide useful insights which assist in the analysis of experimental glow curves. The most important result shows that it is incorrect to assume beforehand that each peak is related to a specific trapping state. The validity of the quasiequilibrium approximation is briefly discussed
Method of construction spatial transition curve
Directory of Open Access Journals (Sweden)
S.V. Didanov
2013-04-01
Full Text Available Purpose. The movement of rail transport (speed rolling stock, traffic safety, etc. is largely dependent on the quality of the track. In this case, a special role is the transition curve, which ensures smooth insertion of the transition from linear to circular section of road. The article deals with modeling of spatial transition curve based on the parabolic distribution of the curvature and torsion. This is a continuation of research conducted by the authors regarding the spatial modeling of curved contours. Methodology. Construction of the spatial transition curve is numerical methods for solving nonlinear integral equations, where the initial data are taken coordinate the starting and ending points of the curve of the future, and the inclination of the tangent and the deviation of the curve from the tangent plane at these points. System solutions for the numerical method are the partial derivatives of the equations of the unknown parameters of the law of change of torsion and length of the transition curve. Findings. The parametric equations of the spatial transition curve are calculated by finding the unknown coefficients of the parabolic distribution of the curvature and torsion, as well as the spatial length of the transition curve. Originality. A method for constructing the spatial transition curve is devised, and based on this software geometric modeling spatial transition curves of railway track with specified deviations of the curve from the tangent plane. Practical value. The resulting curve can be applied in any sector of the economy, where it is necessary to ensure a smooth transition from linear to circular section of the curved space bypass. An example is the transition curve in the construction of the railway line, road, pipe, profile, flat section of the working blades of the turbine and compressor, the ship, plane, car, etc.
Retrograde curves of solidus and solubility
International Nuclear Information System (INIS)
Vasil'ev, M.V.
1979-01-01
The investigation was concerned with the constitutional diagrams of the eutectic type with ''retrograde solidus'' and ''retrograde solubility curve'' which must be considered as diagrams with degenerate monotectic transformation. The solidus and the solubility curves form a retrograde curve with a common retrograde point representing the solubility maximum. The two branches of the Aetrograde curve can be described with the aid of two similar equations. Presented are corresponding equations for the Cd-Zn system and shown is the possibility of predicting the run of the solubility curve
Erdmann, Friederike; Winther, Jeanette Falck; Dalton, Susanne Oksbjerg; Lightfoot, Tracy; Zeeb, Hajo; Simony, Sofie Bay; Deltour, Isabelle; Ferro, Gilles; Bautz, Andrea; Schmiegelow, Kjeld; Schüz, Joachim
2016-06-01
Due to diverse findings as to the role of family factors for childhood cancer survival even within Europe, we explored a nationwide, register-based cohort of Danish children with hematological malignancies. All children born between 1973 and 2006 and diagnosed with a hematological malignancy before the age of 20 years (N = 1,819) were followed until 10 years from diagnosis. Kaplan-Meier curves and Cox proportional hazards models estimating hazard ratios (HR) and 95% confidence intervals (CI) were used to assess the impact of family characteristics on overall survival in children with hematological malignancies. Having siblings and increasing birth order were associated with reduced survival from acute lymphoblastic leukemia (ALL) and acute myeloid leukemia (AML). Associations with AML were strongest and statistically significant. HRs of 1.62 (CI 0.85; 3.09) and 5.76 (CI 2.01; 16.51) were observed for the fourth or later born children with ALL (N = 41) and AML (N = 9), respectively. Children with older parents showed a tendency toward inferior ALL survival, while for AML young maternal age was related to poorer survival. Based on small numbers, a trend toward poorer survival from non-Hodgkin lymphoma was observed for children having siblings and for children of younger parents. Further research is warranted to gain further knowledge on the impact of family factors on childhood cancer survival in other populations and to elaborate potential underlying mechanisms and pathways of those survival inequalities. © 2016 Wiley Periodicals, Inc.
Procter, Emily; Strapazzon, Giacomo; Dal Cappello, Tomas; Zweifel, Benjamin; Würtele, Andreas; Renner, Andreas; Falk, Markus; Brugger, Hermann
2016-08-01
To calculate the first Austrian avalanche survival curve and update a Swiss survival curve to explore survival patterns in the Alps. Avalanche accidents occurring between 2005/06 and 2012/13 in Austria and Switzerland were collected. Completely buried victims (i.e. burial of the head and chest) in open terrain with known outcome (survived or not survived) were included in the analysis. Extrication and survival curves were calculated using the Turnbull algorithm, as in previous studies. 633 of the 796 completely buried victims were included (Austria n=333, Switzerland n=300). Overall survival was 56% (Austria 59%; Switzerland 52%; p=0.065). Time to extrication was shorter in Austria for victims buried ≤60min (p15min. The survival curves resembled those previously published and support the idea that underlying survival patterns are reproducible. The results are in accordance with current recommendations for management of avalanche victims and serve as a reminder that expedient companion rescue within a few minutes is critical for survival. An air pocket was shown to be a positive prognostic factor for survival. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
Advanced techniques for modeling avian nest survival
Dinsmore, S.J.; White, Gary C.; Knopf, F.L.
2002-01-01
and allowed us to generate more biologically meaningful estimates of nest survival.
Page curves for tripartite systems
International Nuclear Information System (INIS)
Hwang, Junha; Lee, Deok Sang; Nho, Dongju; Oh, Jeonghun; Park, Hyosub; Zoe, Heeseung; Yeom, Dong-han
2017-01-01
We investigate information flow and Page curves for tripartite systems. We prepare a tripartite system (say, A , B , and C ) of a given number of states and calculate information and entropy contents by assuming random states. Initially, every particle was in A (this means a black hole), and as time goes on, particles move to either B (this means Hawking radiation) or C (this means a broadly defined remnant, including a non-local transport of information, the last burst, an interior large volume, or a bubble universe, etc). If the final number of states of the remnant is smaller than that of Hawking radiation, then information will be stored by both the radiation and the mutual information between the radiation and the remnant, while the remnant itself does not contain information. On the other hand, if the final number of states of the remnant is greater than that of Hawking radiation, then the radiation contains negligible information, while the remnant and the mutual information between the radiation and the remnant contain information. Unless the number of states of the remnant is large enough compared to the entropy of the black hole, Hawking radiation must contain information; and we meet the menace of black hole complementarity again. Therefore, this contrasts the tension between various assumptions and candidates of the resolution of the information loss problem. (paper)
Mohsen Gerami; Saeed Ghaffari; Amir Mahdi Heidari Tafreshi
2017-01-01
Fragility curves play an important role in damage assessment of buildings. Probability of damage induction to the structure against seismic events can be investigated upon generation of afore mentioned curves. In current research 360 time history analyses have been carried out on structures of 3, 10 and 20 story height and subsequently fragility curves have been adopted. The curves are developed based on two indices of inter story drifts and equivalent strip axial strains of the shear wall. T...
3D flyable curves for an autonomous aircraft
Bestaoui, Yasmina
2012-11-01
The process of conducting a mission for an autonomous aircraft includes determining the set of waypoints (flight planning) and the path for the aircraft to fly (path planning). The autonomous aircraft is an under-actuated system, having less control inputs than degrees of freedom and has two nonholonomic (non integrable) kinematic constraints. Consequently, the set of feasible trajectories will be restricted and the problem of trajectory generation becomes more complicated than a simple interpolation. Care must be taken in the selection of the basic primitives to respect the kinematic and dynamic limitations. The topic of this paper is trajectory generation using parametric curves. The problem can be formulated as follows: to lead the autonomous aircraft from an initial configuration qi to a final configuration qf in the absence of obstacles, find a trajectory q(t) for 0 ≤t ≤ T. The trajectory can be broken down into a geometric path q(s), s being the curvilinear abscissa and s=s(t) a temporal function. In 2D the curves fall into two categories: • Curves whose coordinates have a closed form expressions, for example B-splines, quintic polynomials or polar splines. • Curves whose curvature is a function of their arc length for example clothoids, cubic spirals, quintic or intrinsic splines. Some 3D solutions will be presented in this paper and their effectiveness discussed towards the problem in hand.
An image encryption algorithm utilizing julia sets and hilbert curves.
Directory of Open Access Journals (Sweden)
Yuanyuan Sun
Full Text Available Image encryption is an important and effective technique to protect image security. In this paper, a novel image encryption algorithm combining Julia sets and Hilbert curves is proposed. The algorithm utilizes Julia sets' parameters to generate a random sequence as the initial keys and gets the final encryption keys by scrambling the initial keys through the Hilbert curve. The final cipher image is obtained by modulo arithmetic and diffuse operation. In this method, it needs only a few parameters for the key generation, which greatly reduces the storage space. Moreover, because of the Julia sets' properties, such as infiniteness and chaotic characteristics, the keys have high sensitivity even to a tiny perturbation. The experimental results indicate that the algorithm has large key space, good statistical property, high sensitivity for the keys, and effective resistance to the chosen-plaintext attack.
An image encryption algorithm utilizing julia sets and hilbert curves.
Sun, Yuanyuan; Chen, Lina; Xu, Rudan; Kong, Ruiqing
2014-01-01
Image encryption is an important and effective technique to protect image security. In this paper, a novel image encryption algorithm combining Julia sets and Hilbert curves is proposed. The algorithm utilizes Julia sets' parameters to generate a random sequence as the initial keys and gets the final encryption keys by scrambling the initial keys through the Hilbert curve. The final cipher image is obtained by modulo arithmetic and diffuse operation. In this method, it needs only a few parameters for the key generation, which greatly reduces the storage space. Moreover, because of the Julia sets' properties, such as infiniteness and chaotic characteristics, the keys have high sensitivity even to a tiny perturbation. The experimental results indicate that the algorithm has large key space, good statistical property, high sensitivity for the keys, and effective resistance to the chosen-plaintext attack.
Going Beyond, Going Further: The Preparation of Acid-Base Titration Curves.
McClendon, Michael
1984-01-01
Background information, list of materials needed, and procedures used are provided for a simple technique for generating mechanically plotted acid-base titration curves. The method is suitable for second-year high school chemistry students. (JN)
Localized qubits in curved spacetimes
Palmer, Matthew C.; Takahashi, Maki; Westman, Hans F.
2012-04-01
We provide a systematic and self-contained exposition of the subject of localized qubits in curved spacetimes. This research was motivated by a simple experimental question: if we move a spatially localized qubit, initially in a state |ψ1>, along some spacetime path Γ from a spacetime point x1 to another point x2, what will the final quantum state |ψ2> be at point x2? This paper addresses this question for two physical realizations of the qubit: spin of a massive fermion and polarization of a photon. Our starting point is the Dirac and Maxwell equations that describe respectively the one-particle states of localized massive fermions and photons. In the WKB limit we show how one can isolate a two-dimensional quantum state which evolves unitarily along Γ. The quantum states for these two realizations are represented by a left-handed 2-spinor in the case of massive fermions and a four-component complex polarization vector in the case of photons. In addition we show how to obtain from this WKB approach a fully general relativistic description of gravitationally induced phases. We use this formalism to describe the gravitational shift in the Colella-Overhauser-Werner 1975 experiment. In the non-relativistic weak field limit our result reduces to the standard formula in the original paper. We provide a concrete physical model for a Stern-Gerlach measurement of spin and obtain a unique spin operator which can be determined given the orientation and velocity of the Stern-Gerlach device and velocity of the massive fermion. Finally, we consider multipartite states and generalize the formalism to incorporate basic elements from quantum information theory such as quantum entanglement, quantum teleportation, and identical particles. The resulting formalism provides a basis for exploring precision quantum measurements of the gravitational field using techniques from quantum information theory.
Gabriel, Emmanuel; Attwood, Kristopher; Shah, Rupen; Hochwald, Steven; Kukar, Moshim; Nurkin, Steven
2018-01-01
Introduction Our group recently published that patients with clinically node negative (cN−) esophageal adenocarcinoma do not derive an overall survival (OS) benefit from neoadjuvant chemoradiation (nCRT) compared to clinically node positive (cN+) patients. The aim of this study was to develop a calculator which could more precisely identify which patients derive OS benefit from nCRT. Methods Using the National Cancer Data Base (NCDB) from 2006–2012, patients with clinical stage T1b, N1–N3 or T2–T4a, N−/+, M0 adenocarcinoma of the middle or lower esophagus who underwent surgical resection were selected. The primary endpoint was overall survival (OS). Of this cohort, 80% was used to create the prediction model using Cox regression. The remaining 20% of the cohort was used to internally validate the model, the performance of which is measured using receiver operating characteristic (ROC) curve and the associated area under the curve (AUC). Results A total of 8,974 patients with were used to generate the model. This incorporated patient age, Charlson-Deyo comorbidity score, tumor grade, clinical T and N stage, and nCRT prior to surgery. Each of these variables was independently associated with OS on multivariable analysis. Factors associated with an increased risk of death included advanced age, higher grade, and higher T or N stage. Receipt of nCRT was associated with improved survival. Model performance showed an AUC of 0.644 and 0.689 for 1-year and 3-year OS, respectively. Conclusions A novel OS calculator incorporating patient and treatment factors was developed for esophageal adenocarcinoma, which accurately predicts which patient subsets are expected to derive OS benefit from nCRT. This tool can be very helpful in generating real-time estimates of OS benefit from nCRT in an individualized manner in order to assist with patient care decision making. PMID:28147252
Cognitive function in families with exceptional survival
DEFF Research Database (Denmark)
Barral, Sandra; Cosentino, Stephanie; Costa, Rosann
2012-01-01
The authors investigated whether cognitive function may be used as an endophenotype for longevity by assessing the cognitive performance of a family-based cohort consisting of 1380 individuals from 283 families recruited for exceptional survival in field centers in Boston, New York, Pittsburgh...... members in the offspring generation demonstrate significantly better performance on multiple tasks requiring attention, working memory, and semantic processing when compared with individuals without a family history of exceptional survival, suggesting that cognitive performance may serve as an important...
SPIDERMAN: Fast code to simulate secondary transits and phase curves
Louden, Tom; Kreidberg, Laura
2017-11-01
SPIDERMAN calculates exoplanet phase curves and secondary eclipses with arbitrary surface brightness distributions in two dimensions. The code uses a geometrical algorithm to solve exactly the area of sections of the disc of the planet that are occulted by the star. Approximately 1000 models can be generated per second in typical use, which makes making Markov Chain Monte Carlo analyses practicable. The code is modular and allows comparison of the effect of multiple different brightness distributions for a dataset.
Luminous Intensity Distribution Curve Effect on Luminaire Placement
Bayer, Rudolf; Brejcha, Michal
2015-01-01
The paper discusses a way to deploy a given number of point light sources in the interior to provide required illuminance levels and uniformity of the working plane by using a genetic algorithm. Furthermore a genetic algorithm has been used to generate a proper luminous intensity distribution curve of multiple luminaires to meet the given criteria for the reference plane of the model room for predefined luminaire positions.
Construction of calibration curve for accountancy tank
International Nuclear Information System (INIS)
Kato, Takayuki; Goto, Yoshiki; Nidaira, Kazuo
2009-01-01
Tanks are equipped in a reprocessing plant for accounting solution of nuclear material. The careful measurement of volume in tanks is very important to implement rigorous accounting of nuclear material. The calibration curve relating the volume and level of solution needs to be constructed, where the level is determined by differential pressure of dip tubes. Several calibration curves are usually employed, but it's not explicitly decided how many segment are used, where to select segment, or what should be the degree of polynomial curve. These parameters, i.e., segment and degree of polynomial curve are mutually interrelated to give the better performance of calibration curve. Here we present the construction technique of giving optimum calibration curves and their characteristics. (author)
Hersh, Richard H.; Whiteman, James
1973-01-01
A High School course, General Studies Survival Curriculum, was designed to aid students in problem solving in a complex society. Areas of concern were psychology, consumer economics, environmental studies, law and society, religion and values, ethnic studies, applied aesthetics, creative studies, occupations and futurism. (JB)
Regional Marginal Abatement Cost Curves for NOx
U.S. Environmental Protection Agency — Data underlying the figures included in the manuscript "Marginal abatement cost curve for NOx incorporating controls, renewable electricity, energy efficiency and...
Balint, Joseph P; Gabitzsch, Elizabeth S; Rice, Adrian; Latchman, Yvette; Xu, Younong; Messerschmidt, Gerald L; Chaudhry, Arvind; Morse, Michael A; Jones, Frank R
2015-08-01
A phase 1/2 clinical trial evaluating dosing, safety, immunogenicity, and overall survival on metastatic colorectal cancer (mCRC) patients after immunotherapy with an advanced-generation Ad5 [E1-, E2b-]-CEA(6D) vaccine was performed. We report our extended observations on long-term overall survival and further immune analyses on a subset of treated patients including assessment of cytolytic T cell responses, T regulatory (Treg) to T effector (Teff) cell ratios, flow cytometry on peripheral blood mononuclear cells (PBMCs), and determination of HLA-A2 status. An overall survival of 20 % (median survival 11 months) was observed during long-term follow-up, and no long-term adverse effects were reported. Cytolytic T cell responses increased after immunizations, and cell-mediated immune (CMI) responses were induced whether or not patients were HLA-A2 positive or Ad5 immune. PBMC samples from a small subset of patients were available for follow-up immune analyses. It was observed that the levels of carcinoembryonic antigen (CEA)-specific CMI activity decreased from their peak values during follow-up in five patients analyzed. Preliminary results revealed that activated CD4+ and CD8+ T cells were detected in a post-immunization sample exhibiting high CMI activity. Treg to Teff cell ratios were assessed, and samples from three of five patients exhibited a decrease in Treg to Teff cell ratio during the treatment protocol. Based upon the favorable safety and immunogenicity data obtained, we plan to perform an extensive immunologic and survival analysis on mCRC patients to be enrolled in a randomized/controlled clinical trial that investigates Ad5 [E1-, E2b-]-CEA(6D) as a single agent with booster immunizations.
Directory of Open Access Journals (Sweden)
irfan abbas
2017-01-01
Full Text Available At this time, the players Forex Trading generally still use the data exchange in the form of a Forex Trading figures from different sources. Thus they only receive or know the data rate of a Forex Trading prevailing at the time just so difficult to analyze or predict exchange rate movements future. Forex players usually use the indicators to enable them to analyze and memperdiksi future value. Indicator is a decision making tool. Trading forex is trading currency of a country, the other country's currency. Trading took place globally between the financial centers of the world with the involvement of the world's major banks as the major transaction. Trading Forex offers profitable investment type with a small capital and high profit, with relatively small capital can earn profits doubled. This is due to the forex trading systems exist leverage which the invested capital will be doubled if the predicted results of buy / sell is accurate, but Trading Forex having high risk level, but by knowing the right time to trade (buy or sell, the losses can be avoided. Traders who invest in the foreign exchange market is expected to have the ability to analyze the circumstances and situations in predicting the difference in currency exchange rates. Forex price movements that form the pattern (curve up and down greatly assist traders in making decisions. The movement of the curve used as an indicator in the decision to purchase (buy or sell (sell. This study compares (Comparation type algorithm kernel on Support Vector Machine (SVM to predict the movement of the curve in live time trading forex using the data GBPUSD, 1H. Results of research on the study of the results and discussion can be concluded that the Kernel Dot, Kernel Multiquaric, Kernel Neural inappropriately used for data is non-linear in the case of data forex to follow the pattern of trend curves, because curves generated curved linear (straight and then to type of kernel is the closest curve
Hong Shen
2011-01-01
The concepts of curve profile, curve intercept, curve intercept density, curve profile area density, intersection density in containing intersection (or intersection density relied on intersection reference), curve profile intersection density in surface (or curve intercept intersection density relied on intersection of containing curve), and curve profile area density in surface (AS) were defined. AS expressed the amount of curve profile area of Y phase in the unit containing surface area, S...
Polar representation of centrifugal pump homologous curves
International Nuclear Information System (INIS)
Veloso, Marcelo Antonio; Mattos, Joao Roberto Loureiro de
2008-01-01
Essential for any mathematical model designed to simulate flow transient events caused by pump operations is the pump performance data. The performance of a centrifugal pump is characterized by four basic parameters: the rotational speed, the volumetric flow rate, the dynamic head, and the hydraulic torque. Any one of these quantities can be expressed as a function of any two others. The curves showing the relationships between these four variables are called the pump characteristic curves, also referred to as four-quadrant curves. The characteristic curves are empirically developed by the pump manufacturer and uniquely describe head and torque as functions of volumetric flow rate and rotation speed. Because of comprising a large amount of points, the four-quadrant configuration is not suitable for computational purposes. However, it can be converted to a simpler form by the development of the homologous curves, in which dynamic head and hydraulic torque ratios are expressed as functions of volumetric flow and rotation speed ratios. The numerical use of the complete set of homologous curves requires specification of sixteen partial curves, being eight for the dynamic head and eight for the hydraulic torque. As a consequence, the handling of homologous curves is still somewhat complicated. In solving flow transient problems that require the pump characteristic data for all the operation zones, the polar form appears as the simplest way to represent the homologous curves. In the polar method, the complete characteristics of a pump can be described by only two closed curves, one for the dynamic head and other for the hydraulic torque, both in function of a single angular coordinate defined adequately in terms of the quotient between volumetric flow ratio and rotation speed ratio. The usefulness and advantages of this alternative method are demonstrated through a practical example in which the homologous curves for a pump of the type used in the main coolant loops of a
Aircraft Survivability. Spring 2011
2011-01-01
panel exhibiting telltale signs and critical fragments were identified and collected. The weapon employed against the aircraft was correctly assessed...701C engines (for FCR- equipped Apache Longbows), and a fully integrated cockpit. In addition, the aircraft received improved survivability...sustained analytical contributions to improve the survivability and effectiveness of US military aircraft and weapon systems. These contributions
Starvation-survival of subsurface bacteria
International Nuclear Information System (INIS)
Magill, N.G.
1988-01-01
The ability of four subsurface isolates to survive starvation was examined and the results were compared to survival curves obtained for Escherichia coli B and Serratia marcescens. To examine the starvation-survival phenomenon further, several experimental parameters including nutritional history, initial cell density, growth phase, temperature of growth and starvation, and aeration. Nutritional history, initial cell density, and growth phases of the cells had some effect on the ability of these bacteria to survive whereas temperature and limited aeration had no effect under the conditions tested. No conditions were found where E. coli B or Serratia marcescens died rapidly or where less than 10% of the original cell number of viable cells remained. Because the apparent survival of these bacteria may be due to cryptic growth, cross-feeding experiments with 14 C-labeled cells and unlabeled cells were carried out with E. coli B and Pseudomonas Lula V. Leaked extracellular 14 C-compounds were not used for growth or maintenance energy, and were not taken up by either bacterium. Cryptic growth did not occur; the cells were truly starving under the experimental conditions used
Comparison and evaluation of mathematical lactation curve ...
African Journals Online (AJOL)
p2492989
and on the log of 305-d divided by day in lactation (linear and quadratic) were better than the Gamma function. A study of lactation curves in dairy cattle on farms in central Mexico showed that the Dijkstra function was superior to the Wood, Wilmink and Rook functions for describing the lactation curve (Val-. Arreola et al.
Spectral Curves of Operators with Elliptic Coefficients
Directory of Open Access Journals (Sweden)
J. Chris Eilbeck
2007-03-01
Full Text Available A computer-algebra aided method is carried out, for determining geometric objects associated to differential operators that satisfy the elliptic ansatz. This results in examples of Lamé curves with double reduction and in the explicit reduction of the theta function of a Halphen curve.
Inverse Problem for a Curved Quantum Guide
Directory of Open Access Journals (Sweden)
Laure Cardoulis
2012-01-01
Full Text Available We consider the Dirichlet Laplacian operator −Δ on a curved quantum guide in ℝ n(n=2,3 with an asymptotically straight reference curve. We give uniqueness results for the inverse problem associated to the reconstruction of the curvature by using either observations of spectral data or a boot-strapping method.
Deep-learnt classification of light curves
DEFF Research Database (Denmark)
Mahabal, Ashish; Gieseke, Fabian; Pai, Akshay Sadananda Uppinakudru
2017-01-01
Astronomy light curves are sparse, gappy, and heteroscedastic. As a result standard time series methods regularly used for financial and similar datasets are of little help and astronomers are usually left to their own instruments and techniques to classify light curves. A common approach is to d...
Learning curves in energy planning models
Energy Technology Data Exchange (ETDEWEB)
Barreto, L.; Kypreos, S. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)
1999-08-01
This study describes the endogenous representation of investment cost learning curves into the MARKAL energy planning model. A piece-wise representation of the learning curves is implemented using Mixed Integer Programming. The approach is briefly described and some results are presented. (author) 3 figs., 5 refs.
The Koch curve as a smooth manifold
International Nuclear Information System (INIS)
Epstein, Marcelo; Sniatycki, Jedrzej
2008-01-01
We show that there exists a homeomorphism between the closed interval [0,1] is contained in R and the Koch curve endowed with the subset topology of R 2 . We use this homeomorphism to endow the Koch curve with the structure of a smooth manifold with boundary
Trigonometric Characterization of Some Plane Curves
Indian Academy of Sciences (India)
IAS Admin
There is a way to describe a family of plane curves different from that using Cartesian or po- lar co-ordinates. This is a trigonometric equation involving two angles. In this article, we highlight the fact that trigonometric equations are conve- nient to describe certain one-parameter families of plane curves. In some cases, the ...
Heterozygote PCR product melting curve prediction.
Dwight, Zachary L; Palais, Robert; Kent, Jana; Wittwer, Carl T
2014-03-01
Melting curve prediction of PCR products is limited to perfectly complementary strands. Multiple domains are calculated by recursive nearest neighbor thermodynamics. However, the melting curve of an amplicon containing a heterozygous single-nucleotide variant (SNV) after PCR is the composite of four duplexes: two matched homoduplexes and two mismatched heteroduplexes. To better predict the shape of composite heterozygote melting curves, 52 experimental curves were compared with brute force in silico predictions varying two parameters simultaneously: the relative contribution of heteroduplex products and an ionic scaling factor for mismatched tetrads. Heteroduplex products contributed 25.7 ± 6.7% to the composite melting curve, varying from 23%-28% for different SNV classes. The effect of ions on mismatch tetrads scaled to 76%-96% of normal (depending on SNV class) and averaged 88 ± 16.4%. Based on uMelt (www.dna.utah.edu/umelt/umelt.html) with an expanded nearest neighbor thermodynamic set that includes mismatched base pairs, uMelt HETS calculates helicity as a function of temperature for homoduplex and heteroduplex products, as well as the composite curve expected from heterozygotes. It is an interactive Web tool for efficient genotyping design, heterozygote melting curve prediction, and quality control of melting curve experiments. The application was developed in Actionscript and can be found online at http://www.dna.utah.edu/hets/. © 2013 WILEY PERIODICALS, INC.
A minicourse on moduli of curves
International Nuclear Information System (INIS)
Looijenga, E.
2000-01-01
These are notes that accompany a short course given at the School on Algebraic Geometry 1999 at the ICTP, Trieste. A major goal is to outline various approaches to moduli spaces of curves. In the last part I discuss the algebraic classes that naturally live on these spaces; these can be thought of as the characteristic classes for bundles of curves. (author)
Sibling curves of polynomials | Wiggins | Quaestiones Mathematicae
African Journals Online (AJOL)
Sibling curves were demonstrated in papers [2, 3] as a novel way to visualize the zeros of complex valued functions. In this paper, we continue the work done in those papers by focusing solely on polynomials. We proceed to prove that the number of sibling curves of a polynomial is the degree of the polynomial. Keywords: ...
Measuring Model Rocket Engine Thrust Curves
Penn, Kim; Slaton, William V.
2010-01-01
This paper describes a method and setup to quickly and easily measure a model rocket engine's thrust curve using a computer data logger and force probe. Horst describes using Vernier's LabPro and force probe to measure the rocket engine's thrust curve; however, the method of attaching the rocket to the force probe is not discussed. We show how a…
Curve Matching with Applications in Medical Imaging
DEFF Research Database (Denmark)
Bauer, Martin; Bruveris, Martins; Harms, Philipp
2015-01-01
In the recent years, Riemannian shape analysis of curves and surfaces has found several applications in medical image analysis. In this paper we present a numerical discretization of second order Sobolev metrics on the space of regular curves in Euclidean space. This class of metrics has several...
Single curved fiber sedimentation under gravity
Xiaoying Rong; Dewei Qi; Junyong Zhu
2005-01-01
Dynamics of single curved fiber sedimentation under the gravity are simulated by using lattice Boltzmann method. The results of migration and rotation of the curved fiber at different Reynolds numbers are reported. The results show that the rotation and migration processes are sensitive to the curvature of the fiber.
Wind Turbine Power Curves Incorporating Turbulence Intensity
DEFF Research Database (Denmark)
Sørensen, Emil Hedevang Lohse
2014-01-01
The performance of a wind turbine in terms of power production (the power curve) is important to the wind energy industry. The current IEC-61400-12-1 standard for power curve evaluation recognizes only the mean wind speed at hub height and the air density as relevant to the power production...
Comparison of embrittlement trend curves to high fluence surveillance results
International Nuclear Information System (INIS)
Bogaert, A.S.; Gerard, R.; Chaouadi, R.
2011-01-01
In the regulatory justification of the integrity of the reactor pressure vessels (RPV) for long term operation, use is made of predictive formulas (also called trend curves) to evaluate the RPV embrittlement (expressed in terms of RTNDT shifts) in function of fluence, chemical composition and in some cases temperature, neutron flux or product form. It has been shown recently that some of the existing or proposed trend curves tend to underpredict high dose embrittlement. Due to the scarcity of representative surveillance data at high dose, some test reactor results were used in these evaluations and raise the issue of representativeness of the accelerated test reactor irradiations (dose rate effects). In Belgium the surveillance capsules withdrawal schedule was modified in the nineties in order to obtain results corresponding to 60 years of operation or more with the initial surveillance program. Some of these results are already available and offer a good opportunity to test the validity of the predictive formulas at high dose. In addition, advanced surveillance methods are used in Belgium like the Master Curve, increased tensile tests, and microstructural investigations. These techniques made it possible to show the conservatism of the regulatory approach and to demonstrate increased margins, especially for the first generation units. In this paper the surveillance results are compared to different predictive formulas, as well as to an engineering hardening model developed at SCK.CEN. Generally accepted property-to-property correlations are critically revisited. Conclusions are made on the reliability and applicability of the embrittlement trend curves. (authors)
Quantum curves and conformal field theory
Manabe, Masahide; Sułkowski, Piotr
2017-06-01
To a given algebraic curve we assign an infinite family of quantum curves (Schrödinger equations), which are in one-to-one correspondence with, and have the structure of, Virasoro singular vectors. For a spectral curve of a matrix model we build such quantum curves out of an appropriate representation of the Virasoro algebra, encoded in the structure of the α /β -deformed matrix integral and its loop equation. We generalize this construction to a large class of algebraic curves by means of a refined topological recursion. We also specialize this construction to various specific matrix models with polynomial and logarithmic potentials, and among other results, show that various ingredients familiar in the study of conformal field theory (Ward identities, correlation functions and a representation of Virasoro operators acting thereon, Belavin-Polyakov-Zamolodchikov equations) arise upon specialization of our formalism to the multi-Penner matrix model.
Curved and conformal high-pressure vessel
Croteau, Paul F.; Kuczek, Andrzej E.; Zhao, Wenping
2016-10-25
A high-pressure vessel is provided. The high-pressure vessel may comprise a first chamber defined at least partially by a first wall, and a second chamber defined at least partially by the first wall. The first chamber and the second chamber may form a curved contour of the high-pressure vessel. A modular tank assembly is also provided, and may comprise a first mid tube having a convex geometry. The first mid tube may be defined by a first inner wall, a curved wall extending from the first inner wall, and a second inner wall extending from the curved wall. The first inner wall may be disposed at an angle relative to the second inner wall. The first mid tube may further be defined by a short curved wall opposite the curved wall and extending from the second inner wall to the first inner wall.
Parametric representation of centrifugal pump homologous curves
International Nuclear Information System (INIS)
Veloso, Marcelo A.; Mattos, Joao R.L. de
2015-01-01
Essential for any mathematical model designed to simulate flow transient events caused by pump operations is the pump performance data. The performance of a centrifugal pump is characterized by four basic quantities: the rotational speed, the volumetric flow rate, the dynamic head, and the hydraulic torque. The curves showing the relationships between these four variables are called the pump characteristic curves. The characteristic curves are empirically developed by the pump manufacturer and uniquely describe head and torque as functions of volumetric flow rate and rotation speed. Because of comprising a large amount of points, this configuration is not suitable for computational purposes. However, it can be converted to a simpler form by the development of the homologous curves, in which dynamic head and hydraulic torque ratios are expressed as functions of volumetric flow and rotation speed ratios. The numerical use of the complete set of homologous curves requires specification of sixteen partial curves, being eight for the dynamic head and eight for the hydraulic torque. As a consequence, the handling of homologous curves is still somewhat complicated. In solving flow transient problems that require the pump characteristic data for all the operation zones, the parametric form appears as the simplest way to deal with the homologous curves. In this approach, the complete characteristics of a pump can be described by only two closed curves, one for the dynamic head and other for the hydraulic torque, both in function of a single angular coordinate defined adequately in terms of the quotient between volumetric flow ratio and rotation speed ratio. The usefulness and advantages of this alternative method are demonstrated through a practical example in which the homologous curves for a pump of the type used in the main coolant loops of a pressurized water reactor (PWR) are transformed to the parametric form. (author)
Parametric representation of centrifugal pump homologous curves
Energy Technology Data Exchange (ETDEWEB)
Veloso, Marcelo A.; Mattos, Joao R.L. de, E-mail: velosom@cdtn.br, E-mail: jrmattos@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)
2015-07-01
Essential for any mathematical model designed to simulate flow transient events caused by pump operations is the pump performance data. The performance of a centrifugal pump is characterized by four basic quantities: the rotational speed, the volumetric flow rate, the dynamic head, and the hydraulic torque. The curves showing the relationships between these four variables are called the pump characteristic curves. The characteristic curves are empirically developed by the pump manufacturer and uniquely describe head and torque as functions of volumetric flow rate and rotation speed. Because of comprising a large amount of points, this configuration is not suitable for computational purposes. However, it can be converted to a simpler form by the development of the homologous curves, in which dynamic head and hydraulic torque ratios are expressed as functions of volumetric flow and rotation speed ratios. The numerical use of the complete set of homologous curves requires specification of sixteen partial curves, being eight for the dynamic head and eight for the hydraulic torque. As a consequence, the handling of homologous curves is still somewhat complicated. In solving flow transient problems that require the pump characteristic data for all the operation zones, the parametric form appears as the simplest way to deal with the homologous curves. In this approach, the complete characteristics of a pump can be described by only two closed curves, one for the dynamic head and other for the hydraulic torque, both in function of a single angular coordinate defined adequately in terms of the quotient between volumetric flow ratio and rotation speed ratio. The usefulness and advantages of this alternative method are demonstrated through a practical example in which the homologous curves for a pump of the type used in the main coolant loops of a pressurized water reactor (PWR) are transformed to the parametric form. (author)
TERT promoter mutations in melanoma survival.
Nagore, Eduardo; Heidenreich, Barbara; Rachakonda, Sívaramakrishna; Garcia-Casado, Zaida; Requena, Celia; Soriano, Virtudes; Frank, Christoph; Traves, Victor; Quecedo, Esther; Sanjuan-Gimenez, Josefa; Hemminki, Kari; Landi, Maria Teresa; Kumar, Rajiv
2016-07-01
Despite advances in targeted therapies, the treatment of advanced melanoma remains an exercise in disease management, hence a need for biomarkers for identification of at-risk primary melanoma patients. In this study, we aimed to assess the prognostic value of TERT promoter mutations in primary melanomas. Tumors from 300 patients with stage I/II melanoma were sequenced for TERT promoter and BRAF/NRAS mutations. Cumulative curves were drawn for patients with and without mutations with progression-free and melanoma-specific survival as outcomes. Cox proportional hazard regression models were used to determine the effect of the mutations on survivals. Individually, presence of TERT promoter and BRAF/NRAS mutations associated with poor disease-free and melanoma-specific survival with modification of the effect by the rs2853669 polymorphism within the TERT promoter. Hazard ratio (HR) for simultaneous occurrence of TERT promoter and BRAF/NRAS mutations for disease-free survival was 2.3 (95% CI 1.2-4.4) and for melanoma-specific survival 5.8 (95% CI 1.9-18.3). The effect of the mutations on melanoma-specific survival in noncarriers of variant allele of the polymorphism was significant (HR 4.5, 95% CI 1.4-15.2) but could not be calculated for the carriers due to low number of events. The variant allele per se showed association with increased survival (HR 0.3, 95% CI 0.1-0.9). The data in this study provide preliminary evidence that TERT promoter mutations in combination with BRAF/NRAS mutations can be used to identify patients at risk of aggressive disease and the possibility of refinement of the classification with inclusion of the rs2853669 polymorphism within TERT promoter. © 2016 UICC.
Particles and Dirac-type operators on curved spaces
International Nuclear Information System (INIS)
Visinescu, Mihai
2003-01-01
We review the geodesic motion of pseudo-classical particles in curved spaces. Investigating the generalized Killing equations for spinning spaces, we express the constants of motion in terms of Killing-Yano tensors. Passing from the spinning spaces to the Dirac equation in curved backgrounds we point out the role of the Killing-Yano tensors in the construction of the Dirac-type operators. The general results are applied to the case of the four-dimensional Euclidean Taub-Newman-Unti-Tamburino space. From the covariantly constant Killing-Yano tensors of this space we construct three new Dirac-type operators which are equivalent with the standard Dirac operator. Finally the Runge-Lenz operator for the Dirac equation in this background is expressed in terms of the fourth Killing-Yano tensor which is not covariantly constant. As a rule the covariantly constant Killing-Yano tensors realize certain square roots of the metric tensor. Such a Killing-Yano tensor produces simultaneously a Dirac-type operator and the generator of a one-parameter Lie group connecting this operator with the standard Dirac one. On the other hand, the not covariantly constant Killing-Yano tensors are important in generating hidden symmetries. The presence of not covariantly constant Killing-Yano tensors implies the existence of non-standard supersymmetries in point particle theories on curved background. (author)
Modelling curves of manufacturing feasibilities and demand
Directory of Open Access Journals (Sweden)
Soloninko K.S.
2017-03-01
Full Text Available The authors research the issue of functional properties of curves of manufacturing feasibilities and demand. Settlement of the problem, and its connection with important scientific and practical tasks. According to its nature, the market economy is unstable and is in constant movement. Economy has an effective instrument for explanation of changes in economic environment; this tool is called the modelling of economic processes. The modelling of economic processes depends first and foremost on the building of economic model which is the base for the formalization of economic process, that is, the building of mathematical model. The effective means for formalization of economic process is the creation of the model of hypothetic or imaginary economy. The building of demand model is significant for the market of goods and services. The problem includes the receiving (as the result of modelling definite functional properties of curves of manufacturing feasibilities and demand according to which one can determine their mathematical model. Another problem lies in obtaining majorant properties of curves of joint demand on the market of goods and services. Analysis of the latest researches and publications. Many domestic and foreign scientists dedicated their studies to the researches and building of the models of curves of manufacturing feasibilities and demand. In spite of considerable work of the scientists, such problems as functional properties of the curves and their practical use in modelling. The purpose of the article is to describe functional properties of curves of manufacturing feasibilities and demand on the market of goods and services on the base of modelling of their building. Scientific novelty and practical value. The theoretical regulations (for functional properties of curves of manufacturing feasibilities and demand received as a result of the present research, that is convexity, give extra practical possibilities in a microeconomic
International Nuclear Information System (INIS)
Pickles, Martin D.; Manton, David J.; Lowry, Martin; Turnbull, Lindsay W.
2009-01-01
The purpose of this study was to investigate whether dynamic contrast enhanced MRI (DCE-MRI) data, both pharmacokinetic and empirical, can predict, prior to neoadjuvant chemotherapy, which patients are likely to have a shorter disease free survival (DFS) and overall survival (OS) interval following surgery. Traditional prognostic parameters were also included in the survival analysis. Consequently, a comparison of the prognostic value could be made between all the parameters studied. MR examinations were conducted on a 1.5 T system in 68 patients prior to the initiation of neoadjuvant chemotherapy. DCE-MRI consisted of a fast spoiled gradient echo sequence acquired over 35 phases with a mean temporal resolution of 11.3 s. Both pharmacokinetic and empirical parameters were derived from the DCE-MRI data. Kaplan-Meier survival plots were generated for each parameter and group comparisons were made utilising logrank tests. The results from the 54 patients entered into the univariate survival analysis demonstrated that traditional prognostic parameters (tumour grade, hormonal status and size), empirical parameters (maximum enhancement index, enhancement index at 30 s, area under the curve and initial slope) and adjuvant therapies demonstrated significant differences in survival intervals. Further multivariate Cox regression survival analysis revealed that empirical enhancement parameters contributed the greatest prediction of both DFS and OS in the resulting models. In conclusion, this study has demonstrated that in patients who exhibit high levels of perfusion and vessel permeability pre-treatment, evidenced by elevated empirical DCE-MRI parameters, a significantly lower disease free survival and overall survival can be expected.
Energy Technology Data Exchange (ETDEWEB)
Pickles, Martin D. [Centre for Magnetic Resonance Investigations, Division of Cancer, Postgraduate Medical School, University of Hull, Hull Royal Infirmary, Anlaby Road, Hull, HU3 2JZ (United Kingdom)], E-mail: m.pickles@hull.ac.uk; Manton, David J. [Centre for Magnetic Resonance Investigations, Division of Cancer, Postgraduate Medical School, University of Hull, Hull Royal Infirmary, Anlaby Road, Hull, HU3 2JZ (United Kingdom)], E-mail: d.j.manton@hull.ac.uk; Lowry, Martin [Centre for Magnetic Resonance Investigations, Division of Cancer, Postgraduate Medical School, University of Hull, Hull Royal Infirmary, Anlaby Road, Hull, HU3 2JZ (United Kingdom)], E-mail: m.lowry@hull.ac.uk; Turnbull, Lindsay W. [Centre for Magnetic Resonance Investigations, Division of Cancer, Postgraduate Medical School, University of Hull, Hull Royal Infirmary, Anlaby Road, Hull, HU3 2JZ (United Kingdom)], E-mail: l.w.turnbull@hull.ac.uk
2009-09-15
The purpose of this study was to investigate whether dynamic contrast enhanced MRI (DCE-MRI) data, both pharmacokinetic and empirical, can predict, prior to neoadjuvant chemotherapy, which patients are likely to have a shorter disease free survival (DFS) and overall survival (OS) interval following surgery. Traditional prognostic parameters were also included in the survival analysis. Consequently, a comparison of the prognostic value could be made between all the parameters studied. MR examinations were conducted on a 1.5 T system in 68 patients prior to the initiation of neoadjuvant chemotherapy. DCE-MRI consisted of a fast spoiled gradient echo sequence acquired over 35 phases with a mean temporal resolution of 11.3 s. Both pharmacokinetic and empirical parameters were derived from the DCE-MRI data. Kaplan-Meier survival plots were generated for each parameter and group comparisons were made utilising logrank tests. The results from the 54 patients entered into the univariate survival analysis demonstrated that traditional prognostic parameters (tumour grade, hormonal status and size), empirical parameters (maximum enhancement index, enhancement index at 30 s, area under the curve and initial slope) and adjuvant therapies demonstrated significant differences in survival intervals. Further multivariate Cox regression survival analysis revealed that empirical enhancement parameters contributed the greatest prediction of both DFS and OS in the resulting models. In conclusion, this study has demonstrated that in patients who exhibit high levels of perfusion and vessel permeability pre-treatment, evidenced by elevated empirical DCE-MRI parameters, a significantly lower disease free survival and overall survival can be expected.
DEFF Research Database (Denmark)
Rhodes, Andrew; Evans, Laura E; Alhazzani, Waleed
2017-01-01
OBJECTIVE: To provide an update to "Surviving Sepsis Campaign Guidelines for Management of Sepsis and Septic Shock: 2012". DESIGN: A consensus committee of 55 international experts representing 25 international organizations was convened. Nominal groups were assembled at key international meeting...
Neck curve polynomials in neck rupture model
International Nuclear Information System (INIS)
Kurniadi, Rizal; Perkasa, Yudha S.; Waris, Abdul
2012-01-01
The Neck Rupture Model is a model that explains the scission process which has smallest radius in liquid drop at certain position. Old fashion of rupture position is determined randomly so that has been called as Random Neck Rupture Model (RNRM). The neck curve polynomials have been employed in the Neck Rupture Model for calculation the fission yield of neutron induced fission reaction of 280 X 90 with changing of order of polynomials as well as temperature. The neck curve polynomials approximation shows the important effects in shaping of fission yield curve.
CRC standard curves and surfaces with Mathematica
von Seggern, David H
2006-01-01
Since the publication of the first edition, Mathematica® has matured considerably and the computing power of desktop computers has increased greatly. This enables the presentation of more complex curves and surfaces as well as the efficient computation of formerly prohibitive graphical plots. Incorporating both of these aspects, CRC Standard Curves and Surfaces with Mathematica®, Second Edition is a virtual encyclopedia of curves and functions that depicts nearly all of the standard mathematical functions rendered using Mathematica. While the easy-to-use format remains unchanged from the previ
Morse theory on timelike and causal curves
International Nuclear Information System (INIS)
Everson, J.; Talbot, C.J.
1976-01-01
It is shown that the set of timelike curves in a globally hyperbolic space-time manifold can be given the structure of a Hilbert manifold under a suitable definition of 'timelike.' The causal curves are the topological closure of this manifold. The Lorentzian energy (corresponding to Milnor's energy, except that the Lorentzian inner product is used) is shown to be a Morse function for the space of causal curves. A fixed end point index theorem is obtained in which a lower bound for the index of the Hessian of the Lorentzian energy is given in terms of the sum of the orders of the conjugate points between the end points. (author)
Replication and Analysis of Ebbinghaus' Forgetting Curve.
Murre, Jaap M J; Dros, Joeri
2015-01-01
We present a successful replication of Ebbinghaus' classic forgetting curve from 1880 based on the method of savings. One subject spent 70 hours learning lists and relearning them after 20 min, 1 hour, 9 hours, 1 day, 2 days, or 31 days. The results are similar to Ebbinghaus' original data. We analyze the effects of serial position on forgetting and investigate what mathematical equations present a good fit to the Ebbinghaus forgetting curve and its replications. We conclude that the Ebbinghaus forgetting curve has indeed been replicated and that it is not completely smooth but most probably shows a jump upwards starting at the 24 hour data point.
Replication and Analysis of Ebbinghaus’ Forgetting Curve
Murre, Jaap M. J.; Dros, Joeri
2015-01-01
We present a successful replication of Ebbinghaus’ classic forgetting curve from 1880 based on the method of savings. One subject spent 70 hours learning lists and relearning them after 20 min, 1 hour, 9 hours, 1 day, 2 days, or 31 days. The results are similar to Ebbinghaus' original data. We analyze the effects of serial position on forgetting and investigate what mathematical equations present a good fit to the Ebbinghaus forgetting curve and its replications. We conclude that the Ebbinghaus forgetting curve has indeed been replicated and that it is not completely smooth but most probably shows a jump upwards starting at the 24 hour data point. PMID:26148023
Replication and Analysis of Ebbinghaus' Forgetting Curve.
Directory of Open Access Journals (Sweden)
Jaap M J Murre
Full Text Available We present a successful replication of Ebbinghaus' classic forgetting curve from 1880 based on the method of savings. One subject spent 70 hours learning lists and relearning them after 20 min, 1 hour, 9 hours, 1 day, 2 days, or 31 days. The results are similar to Ebbinghaus' original data. We analyze the effects of serial position on forgetting and investigate what mathematical equations present a good fit to the Ebbinghaus forgetting curve and its replications. We conclude that the Ebbinghaus forgetting curve has indeed been replicated and that it is not completely smooth but most probably shows a jump upwards starting at the 24 hour data point.
Growth curves for twins in Slovenia.
Bricelj, Katja; Blickstein, Isaac; Bržan-Šimenc, Gabrijela; Janša, Vid; Lučovnik, Miha; Verdenik, Ivan; Trojner-Bregar, Andreja; Tul, Nataša
2017-02-01
Abnormalities of fetal growth are more common in twins. We introduce the growth curves for monitoring fetal growth in twin pregnancies in Slovenia. Slovenian National Perinatal Information System for the period between 2002 and 2010 was used to calculate birth weight percentiles for all live born twins for each week from 22nd to 40th week. The calculated percentiles of birth weight for all live-born twins in Slovenia served as the basis for drawing 'growth' curves. The calculated growth curves for twins will help accurately diagnose small or large twin fetuses for their gestational age in the native central European population.
Reflected Light Curves of Extrasolar Planets
Green, D.; Matthews, J.; Kuschnig, R.; Seager, S.
The planned launches of ultra-precise photometric satellites such as MOST, COROT and MONS should provide the first opportunity to study the reflected light curves from extrasolar planets. To predict the capabilities of these missions, we have constructed a series of models of such light curves, improving upon the Monte Carlo simulations by Seager et al. (2000). These models include more realistic features such limb darkening of the star and broad band photometry. For specific models, the resulting planet light curves exhibit unique behavior with the variation of radius, inclination and presence or absence of clouds.
Curves of restricted type in euclidean spaces
Directory of Open Access Journals (Sweden)
Bengü Kılıç Bayram
2014-01-01
Full Text Available Submanifolds of restricted type were introduced in [7]. In the present study we consider restricted type of curves in Em. We give some special examples. We also show that spherical curve in S2(r C E3 is of restricted type if and only if either ƒ(s is constant or a linear function of s of the form ƒ(s = ±s + b and every closed W - curve of rank k and of length 2(r in E2k is of restricted type.
Feature curve extraction from point clouds via developable strip intersection
Directory of Open Access Journals (Sweden)
Kai Wah Lee
2016-04-01
Full Text Available In this paper, we study the problem of computing smooth feature curves from CAD type point clouds models. The proposed method reconstructs feature curves from the intersections of developable strip pairs which approximate the regions along both sides of the features. The generation of developable surfaces is based on a linear approximation of the given point cloud through a variational shape approximation approach. A line segment sequencing algorithm is proposed for collecting feature line segments into different feature sequences as well as sequential groups of data points. A developable surface approximation procedure is employed to refine incident approximation planes of data points into developable strips. Some experimental results are included to demonstrate the performance of the proposed method.
A global motion planner for curve-tracing robots
Energy Technology Data Exchange (ETDEWEB)
Hwang, Y.K.; Chen, P.C.; Neidigk, D.D. [Sandia National Labs., Albuquerque, NM (United States); Maciejewski, A.A. [Purdue Univ., Lafayette, IN (United States)
1993-11-01
We present a global motion planner for tracing curves in three dimensions with robot manipulator tool frames. This planner generates an efficient motion satisfying three types of constraints; constraints on the tool tip for curve tracing, robot kinematic constraints and robot-link collision constraints. Motions are planned using a global search algorithm and a local planner based on a potential-field approach. This planner can be used with potential-field approach. This planner can be used with any robots including redundant manipulators, and can any robots including redundant manipulators, and can control the trade-offs between its algorithmic completeness and computation time. It can be applied in many robotic tasks such as seam welding, caulking, edge deburrring and chamfering, and is expected to reduce motion programming times from days to minutes.
Don, J; Avtalion, R R
1988-08-01
In this study, a Hertwig effect with a non-typical biphasic curve was obtained using sperm irradiated with increasing intensities of UV. The first phase of the UV curve appeared to be quite different from that normally demonstrated using γ or x-ray irradiation. This difference is characterised throughout the length of the first phase by (1) low and stable embryo hatching rates of about 3.5%, and (2) exclusive formation of haploid embryos at any irradiation intensity. Additionally, at both phases, the ability of the sperm to induce morula formation was not affected at all, and no aneuploidy nor chromosomal fragments could be seen. Therefore, it was suggested that in this fish the lethal effect of UV irradition on sperm is mainly expressed on early differentiative events during embryogenesis, which lead to a degeneration of the embryos during early stages of their development. The possible mechanism by which haploidy is achieved during the first phase is discussed. Two generations of diploid gynogenetic tilapias were induced by activating Oreochromis aureus eggs with UV-irradiated O. niloticus sperm and by using the heat-shock technique, at optimized conditions, for the prevention of the second polar body extrusion. Species specific dominant genetic markers (serum esterases and tail striation) were used to confirm the exclusive content of the maternal genome in gynogenetic offspring. Very low survival rates (0.36%) were shown in F1 gynogenetic fish as well as a high incidence of malformations among survivors. In the second gynogenetic generation, both significantly higher survival rates (3.6%) and a considerably reduced incidence of malformations were obtained. We suggest that low frequencies of recombination occur in this species and cause a rapid increase in the inbreeding level. This is followed by the expression of lethal and defective genes that are considerably reduced after second generation selection.
On risk of nuclear power generation
International Nuclear Information System (INIS)
Suguri, Susumu
1995-01-01
When energy consumption becomes high and industrial activities become active, the risk of the death due to traffic accidents and work place accidents becomes high. On the other hand, if energy consumption is very low, and industrial activities are not active, there is the demerit or risk that human life becomes short as the result. In this study, on the viewpoint of the effects that poverty, electric power generation, nuclear reactor accidents, various disasters and spreading diseases exert to human life, the risks were determined quantitatively, and the risk of nuclear power generation was investigated by comparing it with other risks. When the relation of the energy consumption per one person with human life was investigated in various countries, there was considerably good correlation. In order to clarify the factors that exert influence to average life, the survival number curves of now and in the past were discussed on their change. The effects on average human life of poverty, the atmospheric contamination caused by power stations, the serious accidents in nuclear power stations such as that in Chernobyl, unexpected disasters such as Great Hanshin Earthquake and spreading diseases are reported. The comparison of the risk of nuclear power generation with other risks is shown. (K.I.)
Demand curves for hypothetical cocaine in cocaine-dependent individuals.
Bruner, Natalie R; Johnson, Matthew W
2014-03-01
Drug purchasing tasks have been successfully used to examine demand for hypothetical consumption of abused drugs including heroin, nicotine, and alcohol. In these tasks, drug users make hypothetical choices whether to buy drugs, and if so, at what quantity, at various potential prices. These tasks allow for behavioral economic assessment of that drug's intensity of demand (preferred level of consumption at extremely low prices) and demand elasticity (sensitivity of consumption to price), among other metrics. However, a purchasing task for cocaine in cocaine-dependent individuals has not been investigated. This study examined a novel Cocaine Purchasing Task and the relation between resulting demand metrics and self-reported cocaine use data. Participants completed a questionnaire assessing hypothetical purchases of cocaine units at prices ranging from $0.01 to $1,000. Demand curves were generated from responses on the Cocaine Purchasing Task. Correlations compared metrics from the demand curve to measures of real-world cocaine use. Group and individual data were well modeled by a demand curve function. The validity of the Cocaine Purchasing Task was supported by a significant correlation between the demand curve metrics of demand intensity and O max (determined from Cocaine Purchasing Task data) and self-reported measures of cocaine use. Partial correlations revealed that after controlling for demand intensity, demand elasticity and the related measure, P max, were significantly correlated with real-world cocaine use. Results indicate that the Cocaine Purchasing Task produces orderly demand curve data, and that these data relate to real-world measures of cocaine use.
Demand Curves for Hypothetical Cocaine in Cocaine-Dependent Individuals
Bruner, Natalie R.; Johnson, Matthew W.
2013-01-01
Rationale Drug purchasing tasks have been successfully used to examine demand for hypothetical consumption of abused drugs including heroin, nicotine, and alcohol. In these tasks drug users make hypothetical choices whether to buy drugs, and if so, at what quantity, at various potential prices. These tasks allow for behavioral economic assessment of that drug's intensity of demand (preferred level of consumption at extremely low prices) and demand elasticity (sensitivity of consumption to price), among other metrics. However, a purchasing task for cocaine in cocaine-dependent individuals has not been investigated. Objectives This study examined a novel Cocaine Purchasing Task and the relation between resulting demand metrics and self-reported cocaine use data. Methods Participants completed a questionnaire assessing hypothetical purchases of cocaine units at prices ranging from $0.01 to $1,000. Demand curves were generated from responses on the Cocaine Purchasing Task. Correlations compared metrics from the demand curve to measures of real-world cocaine use. Results Group and individual data were well modeled by a demand curve function. The validity of the Cocaine Purchasing Task was supported by a significant correlation between the demand curve metrics of demand intensity and Omax (determined from Cocaine Purchasing Task data) and self-reported measures of cocaine use. Partial correlations revealed that after controlling for demand intensity, demand elasticity and the related measure, Pmax, were significantly correlated with real-world cocaine use. Conclusions Results indicate that the Cocaine Purchasing Task produces orderly demand curve data, and that these data relate to real-world measures of cocaine use. PMID:24217899
Survival pathological prognosis factors in breast cancer
International Nuclear Information System (INIS)
Gonzalez-Longoria Boada, Lourdes B.
2012-01-01
A descriptive and longitudinal study of 273 women with breast cancer belonging to Granma province was carried out from 2003 to 2004, in order to analyze the survival of this female population, reason why the method of Kaplan Meier was used for the calculation of the mentioned variable and the Log Rank test was used for the comparison of curves. Patients with higher survival at 5 years were those who had tumors of 2 cm or less (87.5%), histological grade I (90.3%), nuclear grade I (88.3%), as well as the absence of vascular, lymphatic or lymph node invasion (with 80.6; 74.9 and 6.1% respectively). Also, tumor size, histological and nuclear grade, nodal status, as well as lymphatic and vascular invasion constituted prognosis factors, which favored the individualization of therapeutic behaviors
International Nuclear Information System (INIS)
Pan, Haoran; Koehler, Jonathan
2007-01-01
Learning curves have recently been widely adopted in climate-economy models to incorporate endogenous change of energy technologies, replacing the conventional assumption of an autonomous energy efficiency improvement. However, there has been little consideration of the credibility of the learning curve. The current trend that many important energy and climate change policy analyses rely on the learning curve means that it is of great importance to critically examine the basis for learning curves. Here, we analyse the use of learning curves in energy technology, usually implemented as a simple power function. We find that the learning curve cannot separate the effects of price and technological change, cannot reflect continuous and qualitative change of both conventional and emerging energy technologies, cannot help to determine the time paths of technological investment, and misses the central role of R and D activity in driving technological change. We argue that a logistic curve of improving performance modified to include R and D activity as a driving variable can better describe the cost reductions in energy technologies. Furthermore, we demonstrate that the top-down Leontief technology can incorporate the bottom-up technologies that improve along either the learning curve or the logistic curve, through changing input-output coefficients. An application to UK wind power illustrates that the logistic curve fits the observed data better and implies greater potential for cost reduction than the learning curve does. (author)
Predicting the Survival of Gastric Cancer Patients Using Artificial and Bayesian Neural Networks
Korhani Kangi, Azam; Bahrampour, Abbas
2018-02-26
Introduction and purpose: In recent years the use of neural networks without any premises for investigation of prognosis in analyzing survival data has increased. Artificial neural networks (ANN) use small processors with a continuous network to solve problems inspired by the human brain. Bayesian neural networks (BNN) constitute a neural-based approach to modeling and non-linearization of complex issues using special algorithms and statistical methods. Gastric cancer incidence is the first and third ranking for men and women in Iran, respectively. The aim of the present study was to assess the value of an artificial neural network and a Bayesian neural network for modeling and predicting of probability of gastric cancer patient death. Materials and Methods: In this study, we used information on 339 patients aged from 20 to 90 years old with positive gastric cancer, referred to Afzalipoor and Shahid Bahonar Hospitals in Kerman City from 2001 to 2015. The three layers perceptron neural network (ANN) and the Bayesian neural network (BNN) were used for predicting the probability of mortality using the available data. To investigate differences between the models, sensitivity, specificity, accuracy and the area under receiver operating characteristic curves (AUROCs) were generated. Results: In this study, the sensitivity and specificity of the artificial neural network and Bayesian neural network models were 0.882, 0.903 and 0.954, 0.909, respectively. Prediction accuracy and the area under curve ROC for the two models were 0.891, 0.944 and 0.935, 0.961. The age at diagnosis of gastric cancer was most important for predicting survival, followed by tumor grade, morphology, gender, smoking history, opium consumption, receiving chemotherapy, presence of metastasis, tumor stage, receiving radiotherapy, and being resident in a village. Conclusion: The findings of the present study indicated that the Bayesian neural network is preferable to an artificial neural network for
Uncovering the skewness news impact curve
Czech Academy of Sciences Publication Activity Database
Anatolyev, Stanislav; Petukhov, A.
2016-01-01
Roč. 14, č. 4 (2016), s. 746-771 ISSN 1479-8409 Institutional support: RVO:67985998 Keywords : conditional skewness * news impact curve * stock returns Subject RIV: AH - Economics Impact factor: 1.800, year: 2016
Twisted vector bundles on pointed nodal curves
Indian Academy of Sciences (India)
Abstract. Motivated by the quest for a good compactification of the moduli space of -bundles on a nodal curve we establish a striking relationship between Abramovich's and Vistoli's twisted bundles and Gieseker vector bundles.
Safety evaluation of curve warning speed signs.
2011-06-01
This report presents a review of a research effort to evaluate the safety implications of advisory speeds at horizontal curve locations on Oregon rural two-lane highways. The primary goals of this research effort were to characterize driving operatio...
ARC Code TI: ROC Curve Code Augmentation
National Aeronautics and Space Administration — ROC (Receiver Operating Characteristic) curve Code Augmentation was written by Rodney Martin and John Stutz at NASA Ames Research Center and is a modification of ROC...
Twisted Vector Bundles on Pointed Nodal Curves
Indian Academy of Sciences (India)
Abstract. Motivated by the quest for a good compactification of the moduli space of -bundles on a nodal curve we establish a striking relationship between Abramovich's and Vistoli's twisted bundles and Gieseker vector bundles.
Automorphisms of double coverings of curves
International Nuclear Information System (INIS)
Torres, F.
1994-11-01
We study automorphisms of curves that commute with each other. We prove that the order and the number of fixed points of one of them satisfy certain relations involving those of the other. Then, we specialize our results to the case of double coverings of curves. For instance, if the genus of the curve is at least 4γ + 2 and γ >= 1 (γ = the genus of the covered curve) we prove that the order of an automorphism is bounded above by 2γ + 1 (resp. 4γ + 2) provided it is prime (resp. it has at least five fixed points). We also improve Farkas' bound on the number of fixed points namely 4γ + 4 by showing that it involves the order of the automorphism except in the case of even order when such an improvement is obtained provided the automorphism and the γ-involution has at least one common fixed point. (author). 15 refs
On ``minimally curved spacetimes'' in general relativity
Dadhich, Naresh
1997-01-01
We consider a spacetime corresponding to uniform relativistic potential analogus to Newtonian potential as an example of ``minimally curved spacetime''. We also consider a radially symmetric analogue of the Rindler spacetime of uniform proper acceleration relative to infinity.
Quaternion orders, quadratic forms, and Shimura curves
Alsina, Montserrat
2004-01-01
Shimura curves are a far-reaching generalization of the classical modular curves. They lie at the crossroads of many areas, including complex analysis, hyperbolic geometry, algebraic geometry, algebra, and arithmetic. The text provides an introduction to the subject from a theoretic and algorithmic perspective. The main topics covered in it are Shimura curves defined over the rational number field, the construction of their fundamental domains, and the determination of their complex multiplication points. The study of complex multiplication points in Shimura curves leads to the study of families of binary quadratic forms with algebraic coefficients and to their classification by arithmetic Fuchsian groups. In this regard, the authors develop a theory full of new possibilities which parallels Gauss' theory on the classification of binary quadratic forms with integral coefficients by the action of the modular group. Each topic covered in the book begins with a theoretical discussion followed by carefully worked...
Uncovering the skewness news impact curve
Czech Academy of Sciences Publication Activity Database
Anatolyev, Stanislav; Petukhov, A.
2016-01-01
Roč. 14, č. 4 (2016), s. 746-771 ISSN 1479-8409 Institutional support: PRVOUK-P23 Keywords : conditional skewness * news impact curve * stock returns Subject RIV: AH - Economics Impact factor: 1.800, year: 2016
Procedures for setting curve advisory speed.
2009-08-01
The procedures described in this handbook are intended to improve consistency in curve signing and driver compliance with the advisory speed. The handbook describes guidelines for determining when an advisory speed is needed, criteria for identifying...
Liquefaction Probability Curves for Surficial Geologic Units
Holzer, T. L.; Noce, T. E.; Bennett, M. J.
2009-12-01
Liquefaction probability curves that predict the probability of surface manifestations of earthquake-induced liquefaction are developed for 14 different surficial geologic deposits. The geologic units include alluvial fan, beach ridge, river delta, eolian dune, point bar, floodbasin, natural river levee, abandoned river channel, deep-water lake, lagoonal, sandy artificial fill, and valley train deposits. Probability is conditioned on earthquake magnitude and peak ground acceleration. Curves are developed for water table depths of 1.5 and 5.0 m. Probabilities were derived from complementary cumulative frequency distributions of the liquefaction potential index (LPI) that were computed from 935 cone penetration tests. Most of the curves can be fit with a 3-parameter logistic function, which facilitates computations of probability. For natural deposits with a water table at 1.5 m depth and subjected to an M7.5 earthquake with a PGA = 0.25 g, probabilities range from 0.5 for fluvial point bar, barrier island beach ridge, and deltaic deposits. Retrospective predictions of liquefaction during historical earthquakes based on the curves compare favorably to post-earthquake observations. We also have used the curves to assign ranges of liquefaction probabilities to the susceptibility categories proposed by Youd and Perkins (1978) for different geologic deposits. For the earthquake loading and conditions described above, probabilities range from 0-0.08 for low, 0.09-0.30 for moderate, 0.31-0.62 for high, to 0.63-1.00 for very high susceptibility. Liquefaction probability curves have two primary practical applications. First, the curves can be combined with seismic source characterizations to transform surficial geologic maps into probabilistic liquefaction hazard maps. Geographic specific curves are clearly desirable, but in the absence of such information, generic liquefaction probability curves provide a first approximation of liquefaction hazard. Such maps are useful both
Neutron cross sections: Book of curves
International Nuclear Information System (INIS)
McLane, V.; Dunford, C.L.; Rose, P.F.
1988-01-01
Neuton Cross Sections: Book of Curves represents the fourth edition of what was previously known as BNL-325, Neutron Cross Sections, Volume 2, CURVES. Data is presented only for (i.e., intergrated) reaction cross sections (and related fission parameters) as a function of incident-neutron energy for the energy range 0.01 eV to 200 MeV. For the first time, isometric state production cross sections have been included. 11 refs., 4 figs
Curves along which plane waves can interfere
Energy Technology Data Exchange (ETDEWEB)
Karp, S.N.; Machover, M.
1977-07-01
Partial results are given on a conjecture in inverse scattering theory concerning the interference of two-dimensional plane waves. The conjecture states that an odd number of plane waves of the same frequency can only cancel each other at isolated points and not along a simple continuous curve. It is partially confirmed here for curves which are nearly flat at some point. An analysis is also made for various possible nodes for an even number of plane waves.
[Biomechanic principles of the sagittal compensating curve].
Kubein-Meesenburg, D; Nägerl, H; Fanghänel, J
1990-07-01
The alignment of the buccal teeth along the compensating curve is of functional importance. It is closely related with the functional gear system of anterior and posterior guidance. Measurements have shown that individual differences between masticatory systems are mainly attributable to functional parameters. Purely skeletal parameters are of comparatively little variability. The compensating curve may be regarded as a guiding element within a master gear systems which includes the gear system of anterior and posterior guidance.
Replication and Analysis of Ebbinghaus? Forgetting Curve
Murre, Jaap M. J.; Dros, Joeri
2015-01-01
We present a successful replication of Ebbinghaus’ classic forgetting curve from 1880 based on the method of savings. One subject spent 70 hours learning lists and relearning them after 20 min, 1 hour, 9 hours, 1 day, 2 days, or 31 days. The results are similar to Ebbinghaus' original data. We analyze the effects of serial position on forgetting and investigate what mathematical equations present a good fit to the Ebbinghaus forgetting curve and its replications. We conclude that the Ebbingha...
Curved twistor spaces and H-space
International Nuclear Information System (INIS)
Tod, K.P.
1980-01-01
The curved twistor space construction of Penrose for anti-self-dual solutions to the Einstein vacuum equations is described. Curved twistor spaces are defined and it is shown with the aid of an example how to obtain them by deforming the complex structure of regions of flat twistor space. The connection of this procedure with Newman's H-space construction via asymptotic twistor space is outlined. (Auth.)
Potential Energy Curve of N2 Revisited
Czech Academy of Sciences Publication Activity Database
Špirko, Vladimír; Xiangzhu, L.; Paldus, J.
2011-01-01
Roč. 76, č. 4 (2011), s. 327-341 ISSN 0010-0765 R&D Projects: GA MŠk LC512; GA ČR GAP208/11/0436 Institutional research plan: CEZ:AV0Z40550506 Keywords : reduced multireference coupled-cluster method * reduced potential curve method * nitrogen molecule potential energy curves Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.283, year: 2011
Verified Indifferentiable Hashing into Elliptic Curves
Barthe, Gilles; Grégoire, Benjamin; Heraud, Sylvain; Olmedo, Federico; Zanella-Béguelin, Santiago
2012-01-01
International audience; Many cryptographic systems based on elliptic curves are proven secure in the Random Oracle Model, assuming there exist probabilistic functions that map elements in some domain (e.g. bitstrings) onto uniformly and independently distributed points in a curve. When implementing such systems, and in order for the proof to carry over to the implementation, those mappings must be instantiated with concrete constructions whose behavior does not deviate significantly from rand...
Constructing elliptic curves from Galois representations
Snowden, Andrew; Tsimerman, Jacob
2017-01-01
Given a non-isotrivial elliptic curve over an arithmetic surface, one obtains a lisse $\\ell$-adic sheaf of rank two over the surface. This lisse sheaf has a number of straightforward properties: cyclotomic determinant, finite ramification, rational traces of Frobenius, and somewhere not potentially good reduction. We prove that any lisse sheaf of rank two possessing these properties comes from an elliptic curve.
[Survival in renal transplant recipients in Colombia, 2008-2012].
Osorio-Arango, Karime; Beltrán-Durán, Mauricio; Arias-Murillo, Yazmín; Prieto, Franklyn; Robayo, Adriana
2017-06-01
The Red Nacional de Donación y Trasplantes of the Colombian Instituto Nacional de Salud reported that in 2014, 1,059 organ transplants were performed, of which 761 were kidney transplants, and 643 (84.5%) of these were from cadaveric organ donors. To describe the socio-demographic characteristics of patients who received renal transplants, as well as their outcomes in terms of survival. National kidney transplants were analyzed through an observational retrospective cohort study. Overall survival was estimated using the Kaplan-Meier method. The survival curves by sex, age, type of donor, type of insurance, and time on the waiting list were compared utilizing the log rank hypothesis and a Cox regression. A total of 3,980 patients were included, of whom 338 died according to the Registry of Affiliates. The median follow-up time was 49 months, overall survival was 6.35 years (95% CI: 6.30 to 6.40), the one-year survival following transplantation was 97.2%, the three-year survival, 93.2%, and the five-year survival, 90.8%. The survival rate was higher in patients under 50 years of age, receptors of living donor transplants, and with less than six months on the waiting list. The results obtained serve as the basis for future studies with strict monitoring of survival among kidney transplant recipients in Colombia.
2009-06-01
This report describes how new injury risk curves for the knee/distal femur and the hip were : developed through reanalyses of existing peak knee impact force data. New hip injury risk : curves were developed using survival analysis with a lognormal d...
Environmental bias and elastic curves on surfaces
International Nuclear Information System (INIS)
Guven, Jemal; María Valencia, Dulce; Vázquez-Montejo, Pablo
2014-01-01
The behavior of an elastic curve bound to a surface will reflect the geometry of its environment. This may occur in an obvious way: the curve may deform freely along directions tangent to the surface, but not along the surface normal. However, even if the energy itself is symmetric in the curve's geodesic and normal curvatures, which control these modes, very distinct roles are played by the two. If the elastic curve binds preferentially on one side, or is itself assembled on the surface, not only would one expect the bending moduli associated with the two modes to differ, binding along specific directions, reflected in spontaneous values of these curvatures, may be favored. The shape equations describing the equilibrium states of a surface curve described by an elastic energy accommodating environmental factors will be identified by adapting the method of Lagrange multipliers to the Darboux frame associated with the curve. The forces transmitted to the surface along the surface normal will be determined. Features associated with a number of different energies, both of physical relevance and of mathematical interest, are described. The conservation laws associated with trajectories on surface geometries exhibiting continuous symmetries are also examined. (paper)
Geometric invariant theory for polarized curves
Bini, Gilberto; Melo, Margarida; Viviani, Filippo
2014-01-01
We investigate GIT quotients of polarized curves. More specifically, we study the GIT problem for the Hilbert and Chow schemes of curves of degree d and genus g in a projective space of dimension d-g, as d decreases with respect to g. We prove that the first three values of d at which the GIT quotients change are given by d=a(2g-2) where a=2, 3.5, 4. We show that, for a>4, L. Caporaso's results hold true for both Hilbert and Chow semistability. If 3.5curves. If 2curves. We also analyze in detail the critical values a=3.5 and a=4, where the Hilbert semistable locus is strictly smaller than the Chow semistable locus. As an application, we obtain three compactications of the universal Jacobian over the moduli space of stable curves, weakly-pseudo-stable curves and pseu...
Piecewise power laws in individual learning curves.
Donner, Yoni; Hardy, Joseph L
2015-10-01
The notion that human learning follows a smooth power law (PL) of diminishing gains is well-established in psychology. This characteristic is observed when multiple curves are averaged, potentially masking more complex dynamics underpinning the curves of individual learners. Here, we analyzed 25,280 individual learning curves, each comprising 500 measurements of cognitive performance taken from four cognitive tasks. A piecewise PL (PPL) model explained the individual learning curves significantly better than a single PL, controlling for model complexity. The PPL model allows for multiple PLs connected at different points in the learning process. We also explored the transition dynamics between PL curve component pieces. Performance in later pieces typically surpassed that in earlier pieces, after a brief drop in performance at the transition point. The transition rate was negatively associated with age, even after controlling for overall performance. Our results suggest at least two processes at work in individual learning curves: locally, a gradual, smooth improvement, with diminishing gains within a specific strategy, which is modeled well as a PL; and globally, a discrete sequence of strategy shifts, in which each strategy is better in the long term than the ones preceding it. The piecewise extension of the classic PL of practice has implications for both individual skill acquisition and theories of learning.
Global experience curves for wind farms
International Nuclear Information System (INIS)
Junginger, M.; Faaij, A.; Turkenburg, W.C.
2005-01-01
In order to forecast the technological development and cost of wind turbines and the production costs of wind electricity, frequent use is made of the so-called experience curve concept. Experience curves of wind turbines are generally based on data describing the development of national markets, which cause a number of problems when applied for global assessments. To analyze global wind energy price development more adequately, we compose a global experience curve. First, underlying factors for past and potential future price reductions of wind turbines are analyzed. Also possible implications and pitfalls when applying the experience curve methodology are assessed. Second, we present and discuss a new approach of establishing a global experience curve and thus a global progress ratio for the investment cost of wind farms. Results show that global progress ratios for wind farms may lie between 77% and 85% (with an average of 81%), which is significantly more optimistic than progress ratios applied in most current scenario studies and integrated assessment models. While the findings are based on a limited amount of data, they may indicate faster price reduction opportunities than so far assumed. With this global experience curve we aim to improve the reliability of describing the speed with which global costs of wind power may decline
Directory of Open Access Journals (Sweden)
Liying Jiang
2011-12-01
Full Text Available In this work, the problem of a curved functionally graded piezoelectric (FGP actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytical solutions are obtained by using Airy stress function to examine the effects of material gradient and heat conduction on the performance of the curved actuator. It is found that the material gradient and thermal load have significant influence on the electroelastic fields and the mechanical response of the curved FGP actuator. Without the sacrifice of actuation deflection, smaller internal stresses are generated by using the sandwich actuator with functionally graded piezoelectric layer instead of the conventional bimorph actuator. This work is very helpful for the design and application of curved piezoelectric actuators under thermal environment.
Stenting for curved lesions using a novel curved balloon: Preliminary experimental study.
Tomita, Hideshi; Higaki, Takashi; Kobayashi, Toshiki; Fujii, Takanari; Fujimoto, Kazuto
2015-08-01
Stenting may be a compelling approach to dilating curved lesions in congenital heart diseases. However, balloon-expandable stents, which are commonly used for congenital heart diseases, are usually deployed in a straight orientation. In this study, we evaluated the effect of stenting with a novel curved balloon considered to provide better conformability to the curved-angled lesion. In vitro experiments: A Palmaz Genesis(®) stent (Johnson & Johnson, Cordis Co, Bridgewater, NJ, USA) mounted on the Goku(®) curve (Tokai Medical Co. Nagoya, Japan) was dilated in vitro to observe directly the behavior of the stent and balloon assembly during expansion. Animal experiment: A short Express(®) Vascular SD (Boston Scientific Co, Marlborough, MA, USA) stent and a long Express(®) Vascular LD stent (Boston Scientific) mounted on the curved balloon were deployed in the curved vessel of a pig to observe the effect of stenting in vivo. In vitro experiments: Although the stent was dilated in a curved fashion, stent and balloon assembly also rotated conjointly during expansion of its curved portion. In the primary stenting of the short stent, the stent was dilated with rotation of the curved portion. The excised stent conformed to the curved vessel. As the long stent could not be negotiated across the mid-portion with the balloon in expansion when it started curving, the mid-portion of the stent failed to expand fully. Furthermore, the balloon, which became entangled with the stent strut, could not be retrieved even after complete deflation. This novel curved balloon catheter might be used for implantation of the short stent in a curved lesion; however, it should not be used for primary stenting of the long stent. Post-dilation to conform the stent to the angled vessel would be safer than primary stenting irrespective of stent length. Copyright © 2014 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.
Survival patterns and hemopathological responses of dogs under continuous gamma irradiation
International Nuclear Information System (INIS)
Seed, T.M.; Fritz, T.E.; Tolle, D.V.; Poole, C.M.; Lombard, L.S.; Doyle, D.E.; Kaspar, L.V.; Cullen, S.M.; Carnes, B.A.
1983-01-01
Survival curves were constructed and analyzed relative to contributing hematopathological responses for groups of beagles exposed continuously for duration of life to low daily doses of whole body 60 Co gamma irradiation (27.3 rads/day to 4 rads/day). The survival curves versus time were progressively displaced toward longer survival as rates of exposure were reduced from the relatively high dose rate of 27.3 rads/day to the low dose rate of 4.0 rads/day. Average survival times increased from 57 days at 27.3 rads/day to 1830 days at 4.0 rads/day, representing fractional increased life-spans from 1.5% to 50.8%, respectively. Survival curves versus total dose were markedly displaced along the cumulative radiation dose axis at the extreme dose rates (i.e., 27.3 and 4.0 rads/day), but not at the intermediate dose rates (i.e., 13.4 and 7.9 rads/day) in which the upper linear portions of the survival curves are superimposed. From these dose-dependent survival curves, LD 50 values for whole body gamma irradiation, delivered chronically at 27.3, 13.4, 7.9, and 4.0 rads per day were estimated to be 1442, 2124, 2039, and 7161 rads, respectively. Both time- and dose-dependent survival curves for the intermediate dose rates, in contrast to the extreme dose rates, exhibited pronounced transitions in the lethality rate below the 50% survival level. These lethality rate transitions occurred at approx. 2500 rads of accumulated dose and were attributed to a shift in the spectrum of developing hematopathologies: namely, from a predominance of the acutely ablative radiation-induced lymphohematopoietic syndromes (i.e., septicemias and aplastic anemias) to a predominance of the late arising hematopoietic neoplasias (myelogenous leukemia and related myeloproliferative disorders)
The micro-optic photovoltaic behavior of solar cell along with microlens curved glass substrate
International Nuclear Information System (INIS)
Xie, Jin; Wu, Keke; Cheng, Jian; Li, Ping; Zheng, Jiahua
2015-01-01
Highlights: • A microlens array may be micro-ground on curved photovoltaic glass substrate. • Its micro-optical structure absorbs and scatters the inclined light to solar cell. • It increases conversion efficiency and fill factor in weak and inclined lights. • It improves electricity generation by about 4 times in scattered cloudy daylight. • It produces stronger electricity generation in cloudy day than in sunny day. - Abstract: A hybrid of microlens structure and curved surface may produce high value-added micro-optic performance. Hence, the microlens array is proposed on macro curved glass substrate of thin film solar cell. The objective is to understand how the micro-optic behavior of microlens curved array influences indoor power conversion efficiency and outdoor electricity generation. First, the absorptivities of visible light and infrared light were analyzed in connection with the curved microlens sizes; then the microlens curved glass substrate was fabricated by a Computer Numerical Control (CNC) micro-grinding with micro diamond wheel V-tip; finally, its photovoltaic properties and electricity generation were measured, respectively. It is shown that the microlens curved surface may strongly absorb and scatter light to solar cell. It increases the absorptivity of visible light against plane surface, but it decreases the one of infrared light against microlens surface. When it is applied to solar cell, it enhances the power conversion efficiency by 3.4–10.6% under oblique illumination. When it is applied to solar device, it increases the electricity generation of daylight by 119–106% against microlens surface and by 260–419% against traditional plane surface, respectively. The surprising finding is that it produces much larger electricity generation during cloudy day than during sunny day, but traditional plane surface does not so
Development of the curve of Spee.
Marshall, Steven D; Caspersen, Matthew; Hardinger, Rachel R; Franciscus, Robert G; Aquilino, Steven A; Southard, Thomas E
2008-09-01
Ferdinand Graf von Spee is credited with characterizing human occlusal curvature viewed in the sagittal plane. This naturally occurring phenomenon has clinical importance in orthodontics and restorative dentistry, yet we have little understanding of when, how, or why it develops. The purpose of this study was to expand our understanding by examining the development of the curve of Spee longitudinally in a sample of untreated subjects with normal occlusion from the deciduous dentition to adulthood. Records of 16 male and 17 female subjects from the Iowa Facial Growth Study were selected and examined. The depth of the curve of Spee was measured on their study models at 7 time points from ages 4 (deciduous dentition) to 26 (adult dentition) years. The Wilcoxon signed rank test was used to compare changes in the curve of Spee depth between time points. For each subject, the relative eruption of the mandibular teeth was measured from corresponding cephalometric radiographs, and its contribution to the developing curve of Spee was ascertained. In the deciduous dentition, the curve of Spee is minimal. At mean ages of 4.05 and 5.27 years, the average curve of Spee depths are 0.24 and 0.25 mm, respectively. With change to the transitional dentition, corresponding to the eruption of the mandibular permanent first molars and central incisors (mean age, 6.91 years), the curve of Spee depth increases significantly (P < 0.0001) to a mean maximum depth of 1.32 mm. The curve of Spee then remains essentially unchanged until eruption of the second molars (mean age, 12.38 years), when the depth increases (P < 0.0001) to a mean maximum depth of 2.17 mm. In the adolescent dentition (mean age, 16.21 years), the depth decreases slightly (P = 0.0009) to a mean maximum depth of 1.98 mm, and, in the adult dentition (mean age 26.98 years), the curve remains unchanged (P = 0.66), with a mean maximum depth of 2.02 mm. No significant differences in curve of Spee development were found between
Stronger misdirection in curved than in straight motion
Directory of Open Access Journals (Sweden)
Jorge eOtero-Millan
2011-11-01
Full Text Available Illusions developed by magicians are a rich and largely untapped source of insight into perception and cognition. Here we show that curved motion, as employed by the magician in a classic sleight of hand trick, generates stronger misdirection than rectilinear motion, and that this difference can be explained by the differential engagement of the smooth pursuit and the saccadic oculomotor systems. This research moreover exemplifies how the magician’s intuitive understanding of the spectator’s mindset can surpass that of the cognitive scientist in specific instances, and that observation-based behavioral insights developed by magicians are worthy of quantitative investigation in the neuroscience laboratory.
Rationalization in architecture with surfaces foliated by elastic curves
DEFF Research Database (Denmark)
Nørbjerg, Toke Bjerge
We develop methods for rationalization of CAD surfaces using elastic curves, aiming at a costeffective fabrication method for architectural designs of complex shapes. By moving a heated flexible metal rod though a block of expanded polystyrene, it is possible to produce shapes with both positive...... and the production constraints. If the given surface is smooth, we want the approximating surface to be smooth as well, so we must ensure smooth transition between the surface segments of the final result. As an alternative to rationalization of arbitrary designs, we also present a method for direct generation...
Two-dimensional Riemann problem for rigid representations on an elliptic curve
Matveeva, A. A.; Poberezhny, V. A.
2017-04-01
We consider a generalization of Riemann-Hilbert problem on elliptic curves. For a given elliptic curve and irreducible representation of free group with two generators we construct explicitly a semistable vector bundle of degree zero obeying a logarithmic connection such that its monodromy over fundamental parallelogram is equivalent to given free group representation, monodromy along a-cycle is trivial and monodromy along b-cycle belong to certain orbit.
Calibration curve to establish the exposure dose at Co60 gamma radiation
International Nuclear Information System (INIS)
Guerrero C, C.; Brena V, M.
2000-01-01
The biological dosimetry is an adequate method for the dose determination in cases of overexposure to ionizing radiation or doubt of the dose obtained by physical methods. It is based in the aberrations analysis produced in the chromosomes. The behavior of leisure in chromosomes is of dose-response type and it has been generated curves in distinct laboratories. Next is presented the curve for gamma radiation produced in the National Institute of Nuclear Research (ININ) laboratory. (Author)
3D Curves With a Prescribed Curvature and Torsion for a Flying Robot
International Nuclear Information System (INIS)
Bestaoui, Yasmina
2008-01-01
The objective of this paper is to generate a desired flight path to be followed by an flying robot. A curve with discontinuous curvature and torsion is not appropriate for smooth motions for any vehicle architecture. Three different classes of curves are presented. First, constant curvature and torsion followed by a linear variation versus the curvilinear abscissa then a quadratic variation. Finally, the problem of maneuvers between two trim helices of different curvature and torsion is tackled with
Fourier analysis of the light curves of eclipsing variables. XV
International Nuclear Information System (INIS)
Demircan, O.
1978-01-01
A new general expression for the theoretical moments Asub(2m) of the light curves of eclipsing systems has been presented in the form of infinite series expansion. In this expansion, the terms have been given as the product of two different polynomials which satisfy certain three-term recursion formulae, and the coefficients diminish rapidly with increasing number of terms. Thus, the numerical values of the theoretical moments Asub(2m) can be generated recursively up to four significant figures for any given set of eclipse elements. This can be utilized to solve the eclipse elements in two ways: (i) with an indirect method, (ii) with a direct method as minimization to the observational moments Asub(2m) (area fitting). The procedures for obtaining the elements of any eclipsing system consisting of spherical stars have been automated by making use of the new expression for the moments Asub(2m) of the light curves. The theoretical functions f 0 , f 2 , f 4 , f 6 , g 2 and g 4 which are the functions of a and c 0 , have been used to solve the eclipse elements from the observed photometric data. The closed-form expressions for the functions f 2 , f 4 and f 6 have also been derived in terms of Kopal's I-integrals. The automated methods for obtaining the eclipse elements from one minimum alone have been tested on the light curves of YZ (21) Cassiopeiae under the spherical model assumptions. The results of these applications are given. (Auth.)
Experimental study of curved guide tubes for pellet injection
International Nuclear Information System (INIS)
Combs, S.K.; Baylor, L.R.; Foust, C.R.; Gouge, M.J.; Jernigan, T.C.; Milora, S.L.
1997-01-01
The use of curved guide tubes for transporting frozen hydrogen pellets offers great flexibility for pellet injection into plasma devices. While this technique has been previously employed, an increased interest in its applicability has been generated with the recent ASDEX Upgrade experimental data for magnetic high-field side (HFS) pellet injection. In these innovative experiments, the pellet penetration appeared to be significantly deeper than for the standard magnetic low-field side injection scheme, along with corresponding greater fueling efficiencies. Thus, some of the major experimental fusion devices are planning experiments with HFS pellet injection. Because of the complex geometries of experimental fusion devices, installations with multiple curved guide tube sections will be required for HFS pellet injection. To more thoroughly understand and document the capability of curved guide tubes, an experimental study is under way at the Oak Ridge National Laboratory (ORNL). In particular, configurations and pellet parameters applicable for the DIII-D tokamak and the International Thermonuclear Experimental Reactor (ITER) were simulated in laboratory experiments. Initial test results with nominal 2.7- and 10-mm-diam deuterium pellets are presented and discussed
Directory of Open Access Journals (Sweden)
Francely M. Fernandes
2003-09-01
Full Text Available Lucilia cuprina (Wiedemann, 1830 is a cosmopolite blowfly species of medical and veterinary importance because it produces myiasis, mainly in ovine. In order to evaluate the demographic characteristics of this species, survivorship curves for 327 adult males and 323 adult females, from generation F1 maintained under experimental conditions, were obtained. Entropy was utilized as the estimator of the survival pattern to quantify the mortality distribution of individuals as a function of age. The entropy values 0.216 (males and 0.303 (females were obtained. These results denote that, considering the survivorship interval until the death of the last individual for each sex, the males present a tendency of mortality in more advanced age intervals, in comparison with the females.
Twists of genus three curves and their Jacobians
Meagher, Stephen
2008-01-01
An algebraic curve is a curve defined over by polynomial equations with coefficients in a given field. This thesis treats problems which arise from genus three curves over finite fields. An important tool for treating such curves is the Jacobian variety of the curve. One problem is how many points
Some issues using the master curve concept
International Nuclear Information System (INIS)
Viehrig, H.W.; Boehmert, J.
2000-01-01
The state-of-the-art structural integrity assessment of reactor pressure vessels (RPV) is based on the Reference Temperature Concept, initially proposed by the American Society of Mechanical Engineers (ASME). An experimentally ensured fracture toughness curve was constructed as the lower boundary of the available fracture toughness, K IC , of RPV steels. This conservative curve describing K IC as a function of temperature is used as a universal curve. For different RPV steels the curve is placed on the temperature axis over a reference temperature. In the initial state the nil-ductility-transition temperature (RT NDT ) is applied as reference temperature. The ductile to brittle transition temperature (DBTT) shift caused by the neutron irradiation is determined by Charpy V impact tests. The Charpy V DBTT shift is one of the results of the RPV surveillance programmes. The concept based on the ASME curve has the following disadvantages: - it is not consistent since it links fracture mechanical and technological parameters and - margins of safety and uncertainties cannot be quantified. (orig.)
Brachistochrone curve of a fluid filled cylinder
Sarma, Srikanth; Raja, Sharan; Mahapatra, Pallab Sinha; Panchangnula, Mahesh
2017-11-01
The brachistochrone curve for a non-dissipative particle tries to maximize inertia of the particle but for a fluid filled cylinder, increasing inertia would amount to high dissipative losses. Hence the trade off between inertia and dissipation plays a vital role in the dynamics of a fluid filled cylinder. This trade off manifests itself in the form of an integro-differential equation governing the angular acceleration of the cylinder. Here, we compute the brachistochrone curve using optimal control principles and investigate the effect of the fore mentioned trade off on the deviation of the brachistochrone curve from that of a non-dissipative particle. Also, we investigate the effects of the non-dimensional parameters of the problem on the shape of the brachistochrone curve. We analyze the dissipation rate during the cylinder's motion and show that energy based arguments don't hold good for a fluid filled cylinder. We then analyze the stability of the time varying fluid flow in the cylinder and find an admissible region for the terminal point which would ensure the stability of the fluid flow as the cylinder rolls over the brachistochrone curve.
Incorporating experience curves in appliance standards analysis
International Nuclear Information System (INIS)
Desroches, Louis-Benoit; Garbesi, Karina; Kantner, Colleen; Van Buskirk, Robert; Yang, Hung-Chia
2013-01-01
There exists considerable evidence that manufacturing costs and consumer prices of residential appliances have decreased in real terms over the last several decades. This phenomenon is generally attributable to manufacturing efficiency gained with cumulative experience producing a certain good, and is modeled by an empirical experience curve. The technical analyses conducted in support of U.S. energy conservation standards for residential appliances and commercial equipment have, until recently, assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. This assumption does not reflect real market price dynamics. Using price data from the Bureau of Labor Statistics, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These experience curves were incorporated into recent energy conservation standards analyses for these products. Including experience curves increases the national consumer net present value of potential standard levels. In some cases a potential standard level exhibits a net benefit when considering experience, whereas without experience it exhibits a net cost. These results highlight the importance of modeling more representative market prices. - Highlights: ► Past appliance standards analyses have assumed constant equipment prices. ► There is considerable evidence of consistent real price declines. ► We incorporate experience curves for several large appliances into the analysis. ► The revised analyses demonstrate larger net present values of potential standards. ► The results imply that past standards analyses may have undervalued benefits.
Applications for curved glass in buildings
Directory of Open Access Journals (Sweden)
Jürgen Neugebauer
2015-05-01
Full Text Available In the last years an increase of the number of building projects with built-in curved glass can be observed. The applications can principally be curved monolithic glass, laminated safety glass or insulated glass. This fact makes it absolute of interest to make more investigations in this field. The investigations can be focused on e.g. the process of the bending of the glass to bring it into a certain shape, or the very difficult topic of pre-stressing it. The state of the art of the production process of such glass shows some different ways to produce curved glass. The most used way is to bend the glass at a high temperature of more than 550° Celsius. Another kind of curved glass can be achieved in combination with the laminating process. With the cooling down at the end of the laminating process the interlayer becomes stiff enough to hold the shape by activated shear forces between the glass layers. Another possibility is to produce flat glass and bend it while mounting the glass. The question how to pre-stress curved glass is on the very first beginning of investigations. All these different processes are on the first view very easy but very difficult in the detail.
Comparison of power curve monitoring methods
Directory of Open Access Journals (Sweden)
Cambron Philippe
2017-01-01
Full Text Available Performance monitoring is an important aspect of operating wind farms. This can be done through the power curve monitoring (PCM of wind turbines (WT. In the past years, important work has been conducted on PCM. Various methodologies have been proposed, each one with interesting results. However, it is difficult to compare these methods because they have been developed using their respective data sets. The objective of this actual work is to compare some of the proposed PCM methods using common data sets. The metric used to compare the PCM methods is the time needed to detect a change in the power curve. Two power curve models will be covered to establish the effect the model type has on the monitoring outcomes. Each model was tested with two control charts. Other methodologies and metrics proposed in the literature for power curve monitoring such as areas under the power curve and the use of statistical copulas have also been covered. Results demonstrate that model-based PCM methods are more reliable at the detecting a performance change than other methodologies and that the effectiveness of the control chart depends on the types of shift observed.
Critical Factors for Inducing Curved Somatosensory Saccades
Directory of Open Access Journals (Sweden)
Tamami Nakano
2011-10-01
Full Text Available We are able to make a saccade toward a tactile stimuli to one hand, but trajectories of many saccades curved markedly when the arms were crossed (Groh & Sparks, 2006. However, it remains unknown why some curved and others did not. We therefore examined critical factors for inducing the curved somatosensory saccades. Participants made a saccade as soon as possible from a central fixation point toward a tactile stimulus delivered to one of the two hands, and switched between arms-crossed and arms-uncrossed postures every 6 trials. Trajectories were generally straight when the arms were uncrossed, but all participants made curved saccades when the arms were crossed (12–64%. We found that the probability of curved saccades depended critically on the onset latency: the probability was less than 5% when the latency was larger than 250 ms, but the probability increased up to 70–80% when the onset latency was 160 ms. This relationship was shared across participants. The results suggest that a touch in the arms-crossed posture was always mapped to the wrong hand in the initial phase up to 160 ms, and then remapped to the correct hand during the next 100 ms by some fundamental neural mechanisms shared across participants.
Ko, William L.; Fleischer, Van Tran
2011-01-01
The Ko displacement theory originally developed for shape predictions of straight beams is extended to shape predictions of curved beams. The surface strains needed for shape predictions were analytically generated from finite-element nodal stress outputs. With the aid of finite-element displacement outputs, mathematical functional forms for curvature-effect correction terms are established and incorporated into straight-beam deflection equations for shape predictions of both cantilever and two-point supported curved beams. The newly established deflection equations for cantilever curved beams could provide quite accurate shape predictions for different cantilever curved beams, including the quarter-circle cantilever beam. Furthermore, the newly formulated deflection equations for two-point supported curved beams could provide accurate shape predictions for a range of two-point supported curved beams, including the full-circular ring. Accuracy of the newly developed curved-beam deflection equations is validated through shape prediction analysis of curved beams embedded in the windward shallow spherical shell of a generic crew exploration vehicle. A single-point collocation method for optimization of shape predictions is discussed in detail
Hidayat, I.
2016-09-01
Power projects in the geothermal field has a long span of about 30 years. The power supply should be maintained at a certain value across a range of time. A geothermal field, however, has the characteristics of natural production decline with time. In a geothermal field, development of decline curve model of steam production is important for forecasting production decline in the future. This study was developed using decline curve by production data along 3 years liquid-dominated geothermal reservoir in Ulubelu field. Decline curve in geothermal field based on decline curve in petroleum industry. The decline curve was correlated by reservoir management in geothermal. The purposes of this study to get best match model decline curve and forecasting production in the future. Based on decline curve analysis by production data in Ulubelu field, the result model decline curve is exponential model. From the model, we can get the value of decline rate in the field is 9.4 %/year. Then, the formula of forecasting steam flow used exponent decline to forecast in the future. By using separated system cycle in Ulubelu field, the minimal steam flowrate towards turbine was 502018.4 ton/month. Based on formula of forecasting production and minimal steam flowrate, we can get the time make up wells to maintain steam supply for stability in generator power capacity.
Birth weight curves tailored to maternal world region.
Ray, Joel G; Sgro, Michael; Mamdani, Muhammad M; Glazier, Richard H; Bocking, Alan; Hilliard, Robert; Urquia, Marcelo L
2012-02-01
Newborns of certain immigrant mothers are smaller at birth than those of domestically born mothers. Contemporary, population-derived percentile curves for these newborns are lacking, as are estimates of their risk of being misclassified as too small or too large using conventional rather than tailored birth weight curves. We completed a population-based study of 766 688 singleton live births in Ontario from 2002 to 2007. Smoothed birth weight percentile curves were generated for males and females, categorized by maternal world region of birth: Canada (63.5%), Europe/Western nations (7.6%), Africa/Caribbean (4.9%), Middle East/North Africa (3.4%), Latin America (3.4%), East Asia/Pacific (8.1%), and South Asia (9.2%). We determined the likelihood of misclassifying an infant as small for gestational age (≤ 10th percentile for weight) or as large for gestational age (≥ 90th percentile for weight) on a Canadian-born maternal curve versus one specific to maternal world region of origin. Significantly lower birth weights were seen at gestation-specific 10th, 50th, and 90th percentiles among term infants born to mothers from each world region, with the exception of Europe/Western nations, compared with those for infants of Canadian-born mothers. For example, for South Asian babies born at 40 weeks' gestation, the absolute difference at the 10th percentile was 198 g (95% CI 183 to 212) for males and 170 g (95% CI 161 to 179) for females. Controlling for maternal age and parity, South Asian males had an odds ratio of 2.60 (95% CI 2.53 to 2.68) of being misclassified as small for gestational age, equivalent to approximately 116 in 1000 newborns; for South Asian females the OR was 2.41 (95% CI 2.34 to 2.48), equivalent to approximately 106 per 1000 newborns. Large for gestational age would be missed in approximately 61 per 1000 male and 57 per 1000 female South Asian newborns if conventional rather than ethnicity-specific birth weight curves were used. Birth weight curves
International Nuclear Information System (INIS)
Lee, Hyun Jin; Han, Seungbong; Kim, Young Seok; Nam, Joo-Hyun; Kim, Hak Jae; Kim, Jae Weon; Park, Won; Kim, Byoung-Gie; Kim, Jin Hee; Cha, Soon Do; Kim, Juree; Lee, Ki-Heon; Yoon, Mee Sun
2013-01-01
Purpose: A nomogram is a predictive statistical model that generates the continuous probability of a clinical event such as death or recurrence. The aim of the study was to construct a nomogram to predict 5-year overall survival after postoperative radiation therapy for stage IB to IIA cervical cancer. Methods and Materials: The clinical data from 1702 patients with early-stage cervical cancer, treated at 10 participating hospitals from 1990 to 2011, were reviewed to develop a prediction nomogram based on the Cox proportional hazards model. Demographic, clinical, and pathologic variables were included and analyzed to formulate the nomogram. The discrimination and calibration power of the model was measured using a concordance index (c-index) and calibration curve. Results: The median follow-up period for surviving patients was 75.6 months, and the 5-year overall survival probability was 87.1%. The final model was constructed using the following variables: age, number of positive pelvic lymph nodes, parametrial invasion, lymphovascular invasion, and the use of concurrent chemotherapy. The nomogram predicted the 5-year overall survival with a c-index of 0.69, which was superior to the predictive power of the International Federation of Gynecology and Obstetrics (FIGO) staging system (c-index of 0.54). Conclusions: A survival-predicting nomogram that offers an accurate level of prediction and discrimination was developed based on a large multi-center study. The model may be more useful than the FIGO staging system for counseling individual patients regarding prognosis
DEFF Research Database (Denmark)
Acheampong, George; Narteh, Bedman; Rand, John
2017-01-01
of the SCPFs in Ghana. Distribution ties are associated with negative survival chances and this is not even reversed if the human capital of the owner increases although managers with higher human capital and higher distribution ties experience positive effects. Industry ties are associated with positive ties...
Aldrich, Richard
2010-01-01
This article provides a brief overview of current approaches to education and concludes that none of these is sufficient to meet the challenges that now face the human race. It argues instead for a new concept of education for survival. (Contains 1 note.)
Multinationals and plant survival
DEFF Research Database (Denmark)
Bandick, Roger
2010-01-01
-parametric estimates show that domestic MNE plants are more likely to exit the market than other plants, also when controlling for plant-specific differences. Finally, foreign presence in the market seems to have had a negative impact on the survival rate of plants in non-exporting non- MNEs, but not to have affected...
DEFF Research Database (Denmark)
Bille, Trine; Jensen, Søren
2017-01-01
The literature of cultural economics generally finds that an artistic education has no significant impact on artists’ income and careers in the arts. In our research, we have readdressed this question by looking at the artists’ survival in the arts occupations. The results show that an artistic...... education has a significant impact on artists’ careers in the arts and we find important industry differences....
Survivability via Control Objectives
Energy Technology Data Exchange (ETDEWEB)
CAMPBELL,PHILIP L.
2000-08-11
Control objectives open an additional front in the survivability battle. A given set of control objectives is valuable if it represents good practices, it is complete (it covers all the necessary areas), and it is auditable. CobiT and BS 7799 are two examples of control objective sets.
Flexible survival regression modelling
DEFF Research Database (Denmark)
Cortese, Giuliana; Scheike, Thomas H; Martinussen, Torben
2009-01-01
Regression analysis of survival data, and more generally event history data, is typically based on Cox's regression model. We here review some recent methodology, focusing on the limitations of Cox's regression model. The key limitation is that the model is not well suited to represent time-varyi...
Allen, James E., Jr.
In this address, James E. Allen, Jr., Assistant Secretary for Education and U.S. Commissioner of Education, discusses the relationship of education to the problem of ecological destruction. He states that the solutions to the problems of air, water, and soil pollution may be found in redirected education. This "education for survival" can serve to…
Experimental simulation of closed timelike curves.
Ringbauer, Martin; Broome, Matthew A; Myers, Casey R; White, Andrew G; Ralph, Timothy C
2014-06-19
Closed timelike curves are among the most controversial features of modern physics. As legitimate solutions to Einstein's field equations, they allow for time travel, which instinctively seems paradoxical. However, in the quantum regime these paradoxes can be resolved, leaving closed timelike curves consistent with relativity. The study of these systems therefore provides valuable insight into nonlinearities and the emergence of causal structures in quantum mechanics--essential for any formulation of a quantum theory of gravity. Here we experimentally simulate the nonlinear behaviour of a qubit interacting unitarily with an older version of itself, addressing some of the fascinating effects that arise in systems traversing a closed timelike curve. These include perfect discrimination of non-orthogonal states and, most intriguingly, the ability to distinguish nominally equivalent ways of preparing pure quantum states. Finally, we examine the dependence of these effects on the initial qubit state, the form of the unitary interaction and the influence of decoherence.
Asymmetry dependence of the nuclear caloric curve
International Nuclear Information System (INIS)
McIntosh, A.B.; Bonasera, A.; Cammarata, P.; Hagel, K.; Heilborn, L.; Kohley, Z.; Mabiala, J.; May, L.W.; Marini, P.; Raphelt, A.; Souliotis, G.A.; Wuenschel, S.; Zarrella, A.; Yennello, S.J.
2013-01-01
A basic feature of the nuclear equation of state is not yet understood: the dependence of the nuclear caloric curve on the neutron–proton asymmetry. Predictions of theoretical models differ on the magnitude and even the sign of this dependence. In this work, the nuclear caloric curve is examined for fully reconstructed quasi-projectiles around mass A=50. The caloric curve extracted with the momentum quadrupole fluctuation thermometer shows that the temperature varies linearly with quasi-projectile asymmetry (N−Z)/A . An increase in asymmetry of 0.15 units corresponds to a decrease in temperature on the order of 1 MeV. These results also highlight the importance of a full quasi-projectile reconstruction in the study of thermodynamic properties of hot nuclei
The genus curve of the Abell clusters
Rhoads, James E.; Gott, J. Richard, III; Postman, Marc
1994-01-01
We study the topology of large-scale structure through a genus curve measurement of the recent Abell catalog redshift survey of Postman, Huchra, and Geller (1992). The structure is found to be spongelike near median density and to exhibit isolated superclusters and voids at high and low densities, respectively. The genus curve shows a slight shift toward 'meatball' topology, but remains consistent with the hypothesis of Gaussian random phase initial conditions. The amplitude of the genus curve corresponds to a power-law spectrum with index n = 0.21(sub -0.47 sup +0.43) on scales of 48/h Mpc or to a cold dark matter power spectrum with omega h = 0.36(sub -0.17 sup +0.46).
Energy efficiency and load curve impacts
International Nuclear Information System (INIS)
Feilberg, Nicolai
2002-01-01
One of SINTEF Energy Research's European RTD projects is the two-year EFFLOCOM (Energy EFFiciency and LOad curve impacts of COMmercial development in competitive markets). This project will determine the end-user response of different market-related services offered in deregulated power markets. The project will investigate the possibility of influencing load curves by using different price signals and two-way communications via Internet. The partners are from Denmark. Finland, England, France and Norway. SINTEF Energy Research is in charge of the project management. During the project, the changes in load curves will he studied in the in the participating countries before and after deregulation. Specific issues are the use of ICT, time- and situation-dependent tariffs and smart-house technology. The project will consist of 5 work packages that will give recommendations about new methods, guidelines and tools to promote effective use of energy in the partner countries. The total budget is EUR 692 000. (author)
Differential geometry of curves and surfaces
Banchoff, Thomas F
2010-01-01
Students and professors of an undergraduate course in differential geometry will appreciate the clear exposition and comprehensive exercises in this book that focuses on the geometric properties of curves and surfaces, one- and two-dimensional objects in Euclidean space. The problems generally relate to questions of local properties (the properties observed at a point on the curve or surface) or global properties (the properties of the object as a whole). Some of the more interesting theorems explore relationships between local and global properties. A special feature is the availability of accompanying online interactive java applets coordinated with each section. The applets allow students to investigate and manipulate curves and surfaces to develop intuition and to help analyze geometric phenomena.
The many radial access learning curves.
Hillegass, William B
2017-04-01
The radial approach to endovascular procedures has a series of learning curves: diagnostic heart catheterization, low-risk settings and "straightforward" percutaneous coronary intervention, high-risk settings, and complex coronary intervention, and peripheral vascular angiography and intervention. For diagnostic and low-risk interventional procedures, incremental improvements in technical success and safety are observed in the initial 200 procedures for most operators compared to highly experienced operators. Formal didactic training and ongoing support/review from an experienced radial operator(s) may expedite surmounting the series of radial learning curves while maintaining optimal procedural success and safety. Advances in technology and understanding will require the most experienced radial operators to continually embrace their next learning curve. © 2017 Wiley Periodicals, Inc.
Minimal families of curves on surfaces
Lubbes, Niels
2014-11-01
A minimal family of curves on an embedded surface is defined as a 1-dimensional family of rational curves of minimal degree, which cover the surface. We classify such minimal families using constructive methods. This allows us to compute the minimal families of a given surface.The classification of minimal families of curves can be reduced to the classification of minimal families which cover weak Del Pezzo surfaces. We classify the minimal families of weak Del Pezzo surfaces and present a table with the number of minimal families of each weak Del Pezzo surface up to Weyl equivalence.As an application of this classification we generalize some results of Schicho. We classify algebraic surfaces that carry a family of conics. We determine the minimal lexicographic degree for the parametrization of a surface that carries at least 2 minimal families. © 2014 Elsevier B.V.
Surviving Scientific Academia . . . and Beyond
Energy Technology Data Exchange (ETDEWEB)
Conlin, Jeremy Lloyd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2016-02-03
It's been 16 years since I first took a physics class at Weber State University. Since them, I've survived graduate school in Nuclear Engineering, and a postdoc appointment doing nuclear nonproliferation. Now I'm a Technical Staff Member at Los Alamos National Laboratory working with nuclear data, the physics behind the numerical simulations of nuclear reactors and nuclear weapons. Along the way, I've learned a few things. First, scientific computing is everywhere in science. If you are not writing codes, you will be analyzing their output, and generally there will be more output than a human can correctly and accurately interpret in a timely manner. Second, a career in science or engineering can be very rewarding with opportunities to collaborate with and generate friendships with very bright people from all over the world.
POSSIBLE RECESSION CURVE APPLICATIONS FOR RETENTION EVALUATION
Directory of Open Access Journals (Sweden)
Daniel Liberacki
2015-11-01
Full Text Available The objective of the article was to present possible applications of recession flow curve in a small lowland watershed retention discharge size evaluation. The examined woodland micro catchment area of 0.52 sq km is located in Puszcza Zielonka in central Wielkopolska. The Hutka catchment is typically woody with high retention abilities. The catchment of the Hutka watercourse is forested in 89%, the other 11% is covered by swamps and wasteland. The predominant sites are fresh mixed coniferous forest (BMśw, fresh coniferous forest (Bśw and alder carr forest (Ol. Landscape in catchment is characterized by a large number of interior depressions, filled partly with rainwater or peatbogs, with poorly developed natural drainage. The watercourses do not exceed 1 km in length, the mean width is approx. 0.5 m, while mean depth ranges from 0.2 to 0.3 m. During hydrological research conducted in 1997/1998–1999/2000, 35 major (characteristic raised water stages were observed in Hutka after substantial precipitation. The recession curve dating from 18–24 September 2000 has the α and n rates nearest to average. Comparing the model curve and the curve created by observing watercourse flow, one can notice their resemblance and that they have similar ordinate values as well as shape. In the case of other recession curves, the maximum differences of ordinate values are also about 0.1–0.2 l/s/km2. The measuured α and n rates do not reveal any regularities. There are no significant statistical Horton model parameter (for recession flow curves dependencies between α and n and e.g. initial flows (Qo or the whole period of high water waves (Qp. Consequently, calculated relation between these parameters is only an approximation for the general evaluation of the retention discharge in the catchment area towards retention with flow function.
Hoffmann, AC; Berrino, A; Ray, MB; Arastoopour, H
1999-01-01
The factors influencing the shapes of cyclone grade efficiency curves generated by Computational Fluid Dynamics (CFD) and Lagrangian particle tracking are studied. Two software packages SPRINT and FLUENT were used for a complete picture. Computed curves both with and without the effect of turbulent
Caccamo, M.; Veerkamp, R.F.; Licitra, G.; Petriglieri, R.; Terra, La F.; Pozzebon, A.; Ferguson, J.D.
2012-01-01
The objective of this study was to examine the effect of the chemical composition of a total mixed ration (TMR) tested quarterly from March 2006 through December 2008 for milk, fat, and protein yield curves for 27 herds in Ragusa, Sicily. Before this study, standard yield curves were generated on
Gender differences in survival in old age.
Jacobs, Jeremy M; Cohen, Aaron; Ein-Mor, Eliana; Stessman, Jochanan
2014-12-01
Although increased survival among females is observed throughout much of adult life, supporting evidence among the oldest old is lacking. We examined the hypothesis that gender differences in survival diminish with advancing age. The Jerusalem Longitudinal Study follows a representative cohort born 1920-1921, comprehensively assessed at ages 70, 78, 85, and 90 (n=463, 927, 1224, and 673, respectively). Mortality data were collected during 1990-2013. Kaplan-Meier survival curves and mortality hazards ratios (HRs) were determined, adjusting for gender, marital status, education, loneliness, self-rated health, physical activity, functional status, neoplasm, diabetes mellitus, hypertension, and ischemic heart disease. Survival between ages 70-78 was 77.3% (n=358/463), 78-85 was 68.9% (n=635/927), 85-90 years was 71.1% (n=870/1224), and 90-93 years was 80.5% (n=542/673). With advancing age, the survival advantage among females versus men declined-at ages 70-78 (85.6% vs. 71%, p<0.0001), 78-85 (74% vs. 63%, p=0.001), 85-90 (74% vs. 67.5%, p=0.06), and 90-93 (80% vs. 81%, p=0.92). Compared to females (HR=1.0), the adjusted HR for male mortality at ages 70-78 was 2.93 (95% confidence interval [CI] 1.75-4.91), ages 78-85 was 2.1 (95% CI 1.5-2.92), ages 85-90 was 1.6 (95% CI 1.2-2.2), and ages 90-93 was 1.1 (95% CI 0.7-1.8). Our findings confirm the hypothesis that the increased longevity observed among females at age 70 gradually diminishes with advancing age, and disappears beyond age 90.
From Curve Fitting to Machine Learning
Zielesny, Achim
2011-01-01
The analysis of experimental data is at heart of science from its beginnings. But it was the advent of digital computers that allowed the execution of highly non-linear and increasingly complex data analysis procedures - methods that were completely unfeasible before. Non-linear curve fitting, clustering and machine learning belong to these modern techniques which are a further step towards computational intelligence. The goal of this book is to provide an interactive and illustrative guide to these topics. It concentrates on the road from two dimensional curve fitting to multidimensional clus
Computer Controlled Photometer/Planck Curve Experiment
Dupuy, David L.; Peters, Philip B.
2001-11-01
Developed as a demo in our course for computer control of laboratory experiments, this experiment had two goals: to attempt to measure the output of a tungsten bulb over a wide range of wavelengths, and to test the use of LabVIEW as a programming language for teaching experiment control. The brightness readings were corrected for instrumental effects and fitted with a Planck curve. The experiment involved digital input, digital output to a microstepper controller to move the filter wheel, and analog input. Results will be shown for the Planck curve and the LabVIEW program.
Phonon dispersion curves for CsCN
International Nuclear Information System (INIS)
Gaur, N.K.; Singh, Preeti; Rini, E.G.; Galgale, Jyostna; Singh, R.K.
2004-01-01
The motivation for the present work was gained from the recent publication on phonon dispersion curves (PDCs) of CsCN from the neutron scattering technique. We have applied the extended three-body force shell model (ETSM) by incorporating the effect of coupling between the translation modes and the orientation of cyanide molecules for the description of phonon dispersion curves of CsCN between the temperatures 195 and 295 K. Our results on PDCs in symmetric direction are in good agreement with the experimental data measured with inelastic neutron scattering technique. (author)
Angles between Curves in Metric Measure Spaces
Directory of Open Access Journals (Sweden)
Han Bang-Xian
2017-09-01
Full Text Available The goal of the paper is to study the angle between two curves in the framework of metric (and metric measure spaces. More precisely, we give a new notion of angle between two curves in a metric space. Such a notion has a natural interplay with optimal transportation and is particularly well suited for metric measure spaces satisfying the curvature-dimension condition. Indeed one of the main results is the validity of the cosine formula on RCD*(K, N metric measure spaces. As a consequence, the new introduced notions are compatible with the corresponding classical ones for Riemannian manifolds, Ricci limit spaces and Alexandrov spaces.
Migration and the Wage-Settings Curve
DEFF Research Database (Denmark)
Brücker, Herbert; Jahn, Elke
Germany on basis of a wage-setting curve. The wage-setting curve relies on the assumption that wages respond to a hange in the unemployment rate, albeit imperfectly. This allows one to derive the wage and employment effects of migration simultaneously in a general equilibrium framework. Using...... in the German labor force through immigration increases the aggregate unemployment rate by less than 0.1 percentage points and reduces average wages by 0.1 percent in the short run. While native workers benefit from increased wages and lower unemployment, foreign workers are adversely affected....
Bound states in curved quantum waveguides
International Nuclear Information System (INIS)
Exner, P.; Seba, P.
1987-01-01
We study free quantum particle living on a curved planar strip Ω of a fixed width d with Dirichlet boundary conditions. It can serve as a model for electrons in thin films on a cylindrical-type substrate, or in a curved quantum wire. Assuming that the boundary of Ω is infinitely smooth and its curvature decays fast enough at infinity, we prove that a bound state with energy below the first transversal mode exists for all sufficiently small d. A lower bound on the critical width is obtained using the Birman-Schwinger technique. (orig.)
Boiling curve in high quality flow boiling
International Nuclear Information System (INIS)
Shiralkar, B.S.; Hein, R.A.; Yadigaroglu, G.
1980-01-01
The post dry-out heat transfer regime of the flow boiling curve was investigated experimentally for high pressure water at high qualities. The test section was a short round tube located downstream of a hot patch created by a temperature controlled segment of tubing. Results from the experiment showed that the distance from the dryout point has a significant effect on the downstream temperatures and there was no unique boiling curve. The heat transfer coefficients measured sufficiently downstream of the dryout point could be correlated using the Heineman correlation for superheated steam, indicating that the droplet deposition effects could be neglected in this region
Multivariate curve-fitting in GAUSS
Bunck, C.M.; Pendleton, G.W.
1988-01-01
Multivariate curve-fitting techniques for repeated measures have been developed and an interactive program has been written in GAUSS. The program implements not only the one-factor design described in Morrison (1967) but also includes pairwise comparisons of curves and rates, a two-factor design, and other options. Strategies for selecting the appropriate degree for the polynomial are provided. The methods and program are illustrated with data from studies of the effects of environmental contaminants on ducklings, nesting kestrels and quail.
Light Curve Analysis of SAO23229
Directory of Open Access Journals (Sweden)
Ho-Il Kim
1993-06-01
Full Text Available We have made UBV light curves of a newly discovered eclipsing binary, SAO23229 at Sobaeksan Astronomy Observatory. We determined a minimum light time of HJD2448636.1170+/-0.0005 that is 3 minutes later than predicted time, and founda peculiar light variation at phase 0.75 that may not be secondary eclipse. Orbital period of SAO23229 would be 4.2 days rather than 2.1 days. Our analysis of the light curves shows that SAO23229 has a detached configuration consisting of two almost identical F type main sequence stars.
Analysis of characteristic performance curves in radiodiagnosis by an observer
International Nuclear Information System (INIS)
Kossovoj, A.L.
1988-01-01
Methods and ways of construction of performance characteristic curves (PX-curves) in roentgenology, their qualitative and quantitative estimation are described. Estimation of PX curves application for analysis of scintigraphic and sonographic images is presented
Higher rank BN-theory for curves of genus 4
Lange, H.; Newstead, P. E.
2015-01-01
Higher rank Brill-Noether theory is completely known for curves of genus $\\leq 3$. In this paper, we investigate the theory for curves of genus 4. Some of our results apply to curves of arbitrary genus.
Gonyon, Thomas; Carter, Phillip W; Phillips, Gerald; Owen, Heather; Patel, Dipa; Kotha, Priyanka; Green, John-Bruce D
2014-08-01
The information content of the calcium phosphate compatibility curves for adult parenteral nutrition (PN) solutions may benefit from a more sophisticated statistical treatment. Binary logistic regression analyses were evaluated as part of an alternate method for generating formulation compatibility curves. A commercial PN solution was challenged with a systematic array of calcium and phosphate concentrations. These formulations were then characterized for particulates by visual inspection, light obscuration, and filtration followed by optical microscopy. Logistic regression analyses of the data were compared with traditional treatments for generating compatibility curves. Assay-dependent differences were observed in the compatibility curves and associated probability contours; the microscopic method of precipitate detection generated the most robust results. Calcium and phosphate compatibility data generated from small-volume glass containers reasonably predicted the observed compatibility of clinically relevant flexible containers. The published methods for creating calcium and phosphate compatibility curves via connecting the highest passing or lowest failing calcium concentrations should be augmented or replaced by probability contours of the entire experimental design to determine zones of formulation incompatibilities. We recommend researchers evaluate their data with logistic regression analysis to help build a more comprehensive probabilistic database of compatibility information. © 2013 American Society for Parenteral and Enteral Nutrition.
Bijlsma, S.; Boelens, H. F. M.; Hoefsloot, H. C. J.; Smilde, A. K.
2000-01-01
A traditional curve fitting (TCF) algorithm is compared with a classical curve resolution (CCR) approach for estimating reaction rate constants from spectral data obtained in time of a chemical reaction. In the TCF algorithm, reaction rate constants an estimated from the absorbance versus time data
Characterization of Elliptic Curve Traces under FR-reduction
Miyaji, Atsuko; Nakabayashi, Masaki; Takano, Shunzo
2001-01-01
Elliptic curve cryptosystems([19],[25]) are based on the elliptic curve discrete logarithm problem(ECDLP). If elliptic curve cryptosystems avoid FR-reduction([11],[17]) and anomalous elliptic curve over F_q ([34],[3],[36]), then with current knowledge we can construct elliptic curve cryptosystems over a smaller definition field. ECDLP has an interesting property that the security deeply depends on elliptic curve traces rather than definition fields, which does not occur in the case of the dis...
Contributions to the R-curve behaviour of ceramic materials
International Nuclear Information System (INIS)
Fett, T.
1994-12-01
Several ceramic materials show an increase in crack growth resistance with increasing crack extension. Especially, in case of coarse-grained alumina this ''R-curve effect'' is caused by crack-face interactions in the wake of the advancing crack. Similar effects occur for whisker reinforced ceramics. Due to the crack-face interactions so-called ''bridging stresses'' are generated which transfer forces between the two crack surfaces. A second reason for an increase of crack-growth resistance are stress-induced phase transformations in zirconia ceramics with the tetragonal phase changing to the monoclinic phase. These transformations will affect the stress field in the surroundings of crack tips. The transformation generates a crack-tip transformation zone and, due to the stress balance, also residual stresses in the whole crack region which result in a residual stress intensity factor. This additional stress intensity factor is also a reason for the R-curve behaviour. In this report both effects are outlined in detail. (orig.) [de
Choi, Y S; Ahn, S S; Lee, H-J; Chang, J H; Kang, S-G; Kim, E H; Kim, S H; Lee, S-K
2017-08-01
Although perfusion and permeability MR parameters have known to have prognostic value, they have reproducibility issues. Our aim was to evaluate whether the initial area under the time-to-signal intensity curve (IAUC) derived from dynamic contrast-enhanced MR imaging can improve prognosis prediction in patients with glioblastoma with known MGMT status. We retrospectively examined 88 patients with glioblastoma who underwent preoperative dynamic contrast-enhanced MR imaging. The means of IAUC values at 30 and 60 seconds (IAUC30 mean and IAUC60 mean ) were extracted from enhancing tumors. The prognostic values of IAUC parameters for overall survival and progression-free survival were assessed with log-rank tests, according to the MGMT status. Multivariate overall survival and progression-free survival models before and after adding the IAUC parameters as covariates were explored by net reclassification improvement after receiver operating characteristic analysis for 1.5-year overall survival and 1-year progression-free survival and by random survival forest. High IAUC parameters were associated with worse overall survival and progression-free survival in the unmethylated MGMT group, but not in the methylated group. In the unmethylated MGMT group, 1.5-year overall survival and 1-year progression-free survival prediction improved significantly after adding IAUC parameters (overall survival area under the receiver operating characteristic curve, 0.86; progression-free survival area under the receiver operating characteristic curve, 0.74-0.76) to the model with other prognostic factors (overall survival area under the receiver operating characteristic curve, 0.81; progression-free survival area under the receiver operating characteristic curve, 0.69; P prediction ( P = .059). Random survival forest models indicated that the IAUC parameters were the second or most important predictors in the unmethylated MGMT group, except in the case of the IAUC60 mean for progression
Evaluation of biological characteristics of neutron beam generated from MC50 cyclotron
International Nuclear Information System (INIS)
Eom, Keun Yong; Wu, Hong Gyun; Park, Hye Jin; Huh, Soon Nyung; Ye, Sung Joon; Lee, Dong Han; Park, Suk Won
2006-01-01
To evaluate biological characteristics of neutron beam generated by MC50 cyclotron located in the Korea Institute of Radiological and Medical Sciences (KIRAMS). The neutron beams generated with 15 mm Beryllium target hit by 35 MeV proton beam was used and dosimetry data was measured before in-vitro study. We irradiated 0, 1, 2, 3, 4 and 5 Gy of neutron beam to EMT-6 cell line and surviving fraction (SF) was measured. The SF curve was also examined at the same dose when applying lead shielding to avoid gamma ray component. In the X-ray experiment, SF curve was obtained after irradiation of 0, 2, 5, 10 and 15 Gy. The neutron beams have 84% of neutron and 16% of gamma component at the depth of 2 cm with the field size of 26 x 26 cm 2 , beam current 20 μ A, and dose rate of 9.25 cGy/min. The SF curve from X-ray, when fitted to linear-quadratic (LQ) model, had 0.611 as α / β ratio (α = 0.0204, β = 0.0334, R 2 = 0.999, respectively). The SF curve from neutron beam had shoulders at low dose area and fitted well to LQ model with the value of R 2 exceeding 0.99 in all experiments. The mean value of alpha and beta were -0.315 (range, -0.25 4 ∼ -0.360) and 0.247 (0.220 ∼ 0.262), respectively. The addition of lead shielding resulted in no straightening of SF curve and shoulders in low dose area still existed. The RBE of neutron beam was in range of 2.07 ∼ 2.19 with SF = 0.1 and 2.21 ∼ 2.35 with SF = 0.01, respectively. The neutron beam from MC50 cyclotron has significant amount of gamma component and this may have contributed to form the shoulder of survival curve. The RBE of neutron beam-generated by MC50 was about 2.2
The effect of the freezing curve type on bull spermatozoa motility after thawing
Directory of Open Access Journals (Sweden)
Martina Doležalová
2015-01-01
Full Text Available The objective of this work was to determine the effect of selected freezing curves on spermatozoa survivability after thawing, defined by its motility. The ejaculates of nine selected sires of the same age, breed, and frequency of collecting, bred under the same breeding conditions including handling, stabling, feeding system and feeding ratio composition, were repeatedly collected and evaluated. Sperm samples of each sire were diluted using only one extender and divided into four parts. Selected four freezing curves – the standard, commercially recommended three-phase curve; a two-phase curve; a slow three-phase curve; and a fast three-phase curve, differing in the course of temperature vs time, were applied. The percentage rate of progressive motile spermatozoa above head was determined immediately after thawing, and after 30, 60, 90, and 120 min of the thermodynamic test (TDT. Moreover, average spermatozoa motility (AMOT and spermatozoa motility decrease (MODE throughout the entire TDT were evaluated. Insemination doses frozen using the simpler two-phase curve demonstrated the highest motility values (+2.97% to +10.37%; P < 0.05–0.01 immediately after thawing and during the entire TDT. Concurrently, the highest AMOT (+4.37% to +8.82%; P < 0.01 was determined. The highest spermatozoa motility values were detected after thawing doses frozen by the two-phase freezing curve in eight out of nine sires. Simultaneously, a significant effect of sire individuality was clearly confirmed. Inter-sire differences of spermatozoa motility during TDT as well as AMOT and MODE were significant (P < 0.01. The findings describing both factors of interaction indicate the necessity of individual cryopreservation of the ejaculate to increase its fertilization capability after thawing.
Neuronal survival in the brain: neuron type-specific mechanisms
DEFF Research Database (Denmark)
Pfisterer, Ulrich Gottfried; Khodosevich, Konstantin
2017-01-01
Neurogenic regions of mammalian brain produce many more neurons that will eventually survive and reach a mature stage. Developmental cell death affects both embryonically produced immature neurons and those immature neurons that are generated in regions of adult neurogenesis. Removal of substantial...... for survival in a certain brain region. This review focuses on how immature neurons survive during normal and impaired brain development, both in the embryonic/neonatal brain and in brain regions associated with adult neurogenesis, and emphasizes neuron type-specific mechanisms that help to survive for various...
Foot-Ankle Fractures and Injury Probability Curves from Post-mortem Human Surrogate Tests.
Yoganandan, Narayan; Chirvi, Sajal; Pintar, Frank A; Uppal, Harmeeth; Schlick, Michael; Banerjee, Anjishnu; Voo, Liming; Merkle, Andrew; Kleinberger, Michael
2016-10-01
This purpose of this study was to replicate foot-ankle injuries seen in the military and derive human injury probability curves using the human cadaver model. Lower legs were isolated below knee from seventeen unembalmed human cadavers and they were aligned in a 90-90 posture (plantar surface orthogonal to leg). The specimens were loaded along the tibia axis by applying short-time duration pulses, using a repeated testing protocol. Injuries were documented using pre- and post-test X-rays, computed tomography scans, and dissection. Peak force-based risk curves were derived using survival analysis and accounted for data censoring. Fractures were grouped into all foot-ankle (A), any calcaneus (B), and any tibia injuries (C), respectively. Calcaneus and/or distal tibia/pilon fractures occurred in fourteen tests. Axial forces were the greatest and least for groups C and B, respectively. Times attainments of forces for all groups were within ten milliseconds. The Weibull function was the optimal probability distribution for all groups. Age was significant (p < 0.05) for groups A and C. Survival analysis-based probability curves were derived for all groups. Data are given in the body of paper. Age-based, risk-specific, and continuous distribution probability curves/responses guide in the creation of an injury assessment capability for military blast environments.
Some genus 3 curves with many points
Auer, R; Top, J; Fieker, C; Kohel, DR
2002-01-01
We explain a naive approach towards the problem of finding genus 3 curves C over any given finite field F-q of odd characteristic, with a number of rational points close to the Hasse-Weil-Serre upper bound q+1+3[2rootq]. The method turns out to be successful at least in characteristic 3.
Meromorphic connections on vector bundles over curves
Indian Academy of Sciences (India)
Descartes,. 67084 Strasbourg Cedex, France. *Correspond author. E-mail: indranil@math.tifr.res.in; heu@math.unistra.fr. MS received 17 July 2013; revised 20 October 2013. Abstract. We give a criterion for filtered vector bundles over curves to admit a ...
Phonon dispersion curves of CsCN
Indian Academy of Sciences (India)
Abstract. The motivation for the present work was gained from the recent publication on phonon dispersion curves (PDCs) of CsCN from the neutron scattering technique. We have applied the extended three-body force shell model (ETSM) by incorporating the effect of coupling between the translation modes and the ...
A Probabilistic Framework for Curve Evolution
DEFF Research Database (Denmark)
Dahl, Vedrana Andersen
2017-01-01
approach include ability to handle textured images, simple generalization to multiple regions, and efficiency in computation. We test our probabilistic framework in combination with parametric (snakes) and geometric (level-sets) curves. The experimental results on composed and natural images demonstrate...
Replication and analysis of Ebbinghaus' forgetting curve
Murre, J.M.J.; Dros, J.
2015-01-01
We present a successful replication of Ebbinghaus’ classic forgetting curve from 1880 based on the method of savings. One subject spent 70 hours learning lists and relearning them after 20 min, 1 hour, 9 hours, 1 day, 2 days, or 31 days. The results are similar to Ebbinghaus' original data. We
Steady turbulent flow in curved rectangular channels
De Vriend, H.J.
1979-01-01
After the study of fully developed and developing steady laminar flow in curved channels of shallow rectangular wet cross-section (see earlier reports in this series), steady turbulent flow in such channels is investigated as a next step towards a mathematical model of the flow in shallow river
Developing laminar flow in curved rectangular channels
De Vriend, H.J.
1978-01-01
As an intermediate step between earlier investigations on fully developed laminar flow in curved channels of shallow rectancular wet cross-section and the mathematical modeling of turbulent flow in river bends, a mathematical model of developing laminar flow in such channels is investigated. The
Covariant quantizations in plane and curved spaces
Energy Technology Data Exchange (ETDEWEB)
Assirati, J.L.M. [University of Sao Paulo, Institute of Physics, Sao Paulo (Brazil); Gitman, D.M. [Tomsk State University, Department of Physics, Tomsk (Russian Federation); P.N. Lebedev Physical Institute, Moscow (Russian Federation); University of Sao Paulo, Institute of Physics, Sao Paulo (Brazil)
2017-07-15
We present covariant quantization rules for nonsingular finite-dimensional classical theories with flat and curved configuration spaces. In the beginning, we construct a family of covariant quantizations in flat spaces and Cartesian coordinates. This family is parametrized by a function ω(θ), θ element of (1,0), which describes an ambiguity of the quantization. We generalize this construction presenting covariant quantizations of theories with flat configuration spaces but already with arbitrary curvilinear coordinates. Then we construct a so-called minimal family of covariant quantizations for theories with curved configuration spaces. This family of quantizations is parametrized by the same function ω(θ). Finally, we describe a more wide family of covariant quantizations in curved spaces. This family is already parametrized by two functions, the previous one ω(θ) and by an additional function Θ(x,ξ). The above mentioned minimal family is a part at Θ = 1 of the wide family of quantizations. We study constructed quantizations in detail, proving their consistency and covariance. As a physical application, we consider a quantization of a non-relativistic particle moving in a curved space, discussing the problem of a quantum potential. Applying the covariant quantizations in flat spaces to an old problem of constructing quantum Hamiltonian in polar coordinates, we directly obtain a correct result. (orig.)
Covariant quantizations in plane and curved spaces
International Nuclear Information System (INIS)
Assirati, J.L.M.; Gitman, D.M.
2017-01-01
We present covariant quantization rules for nonsingular finite-dimensional classical theories with flat and curved configuration spaces. In the beginning, we construct a family of covariant quantizations in flat spaces and Cartesian coordinates. This family is parametrized by a function ω(θ), θ element of (1,0), which describes an ambiguity of the quantization. We generalize this construction presenting covariant quantizations of theories with flat configuration spaces but already with arbitrary curvilinear coordinates. Then we construct a so-called minimal family of covariant quantizations for theories with curved configuration spaces. This family of quantizations is parametrized by the same function ω(θ). Finally, we describe a more wide family of covariant quantizations in curved spaces. This family is already parametrized by two functions, the previous one ω(θ) and by an additional function Θ(x,ξ). The above mentioned minimal family is a part at Θ = 1 of the wide family of quantizations. We study constructed quantizations in detail, proving their consistency and covariance. As a physical application, we consider a quantization of a non-relativistic particle moving in a curved space, discussing the problem of a quantum potential. Applying the covariant quantizations in flat spaces to an old problem of constructing quantum Hamiltonian in polar coordinates, we directly obtain a correct result. (orig.)
Designing the Alluvial Riverbeds in Curved Paths
Macura, Viliam; Škrinár, Andrej; Štefunková, Zuzana; Muchová, Zlatica; Majorošová, Martina
2017-10-01
The paper presents the method of determining the shape of the riverbed in curves of the watercourse, which is based on the method of Ikeda (1975) developed for a slightly curved path in sandy riverbed. Regulated rivers have essentially slightly and smoothly curved paths; therefore, this methodology provides the appropriate basis for river restoration. Based on the research in the experimental reach of the Holeška Brook and several alluvial mountain streams the methodology was adjusted. The method also takes into account other important characteristics of bottom material - the shape and orientation of the particles, settling velocity and drag coefficients. Thus, the method is mainly meant for the natural sand-gravel material, which is heterogeneous and the particle shape of the bottom material is very different from spherical. The calculation of the river channel in the curved path provides the basis for the design of optimal habitat, but also for the design of foundations of armouring of the bankside of the channel. The input data is adapted to the conditions of design practice.
Electronic properties of curved graphene sheets
Cortijo, Alberto; Vozmediano, Maria A. H.
2006-01-01
A model is proposed to study the electronic structure of slightly curved graphene sheets with an arbitrary number of pentagon-heptagon pairs and Stone-Wales defects based on a cosmological analogy. The disorder induced by curvature produces characteristic patterns in the local density of states that can be observed in scanning tunnel and transmission electron microscopy.
A Mean Value Formula for Elliptic Curves
Directory of Open Access Journals (Sweden)
Rongquan Feng
2014-01-01
Full Text Available It is proved in this paper that, for any point on an elliptic curve, the mean value of x-coordinates of its n-division points is the same as its x-coordinate and that of y-coordinates of its n-division points is n times that of its y-coordinate.
Bayesian Estimation of Item Response Curves.
Tsutakawa, Robert K.; Lin, Hsin Ying
1986-01-01
Item response curves for a set of binary responses are studied from a Bayesian viewpoint of estimating the item parameters. For the two-parameter logistic model with normally distributed ability, restricted bivariate beta priors are used to illustrate the computation of the posterior mode via the EM algorithm. (Author/LMO)
Numerical analysis of thermoluminescence glow curves
International Nuclear Information System (INIS)
Gomez Ros, J. M.; Delgado, A.
1989-01-01
This report presents a method for the numerical analysis of complex thermoluminescence glow curves resolving the individual glow peak components. The method employs first order kinetics analytical expressions and is based In a Marquart-Levenberg minimization procedure. A simplified version of this method for thermoluminescence dosimetry (TLD) is also described and specifically developed to operate whit Lithium Fluoride TLD-100. (Author). 36 refs
Light extraction block with curved surface
Levermore, Peter; Krall, Emory; Silvernail, Jeffrey; Rajan, Kamala; Brown, Julia J.
2016-03-22
Light extraction blocks, and OLED lighting panels using light extraction blocks, are described, in which the light extraction blocks include various curved shapes that provide improved light extraction properties compared to parallel emissive surface, and a thinner form factor and better light extraction than a hemisphere. Lighting systems described herein may include a light source with an OLED panel. A light extraction block with a three-dimensional light emitting surface may be optically coupled to the light source. The three-dimensional light emitting surface of the block may includes a substantially curved surface, with further characteristics related to the curvature of the surface at given points. A first radius of curvature corresponding to a maximum principal curvature k.sub.1 at a point p on the substantially curved surface may be greater than a maximum height of the light extraction block. A maximum height of the light extraction block may be less than 50% of a maximum width of the light extraction block. Surfaces with cross sections made up of line segments and inflection points may also be fit to approximated curves for calculating the radius of curvature.
MulensModel: Microlensing light curves modeling
Poleski, Radoslaw; Yee, Jennifer
2018-03-01
MulensModel calculates light curves of microlensing events. Both single and binary lens events are modeled and various higher-order effects can be included: extended source (with limb-darkening), annual microlensing parallax, and satellite microlensing parallax. The code is object-oriented and written in Python3, and requires AstroPy (ascl:1304.002).
Morphological modelling of strongly curved islands
Roelvink, D.; Den Heijer, C.; Van Thiel De Vries, J.S.M.
2013-01-01
Land reclamations and island coasts often involve strongly curved shorelines, which are challenging to be properly modeled by numerical morphological models. Evaluation of the long term development of these types of coasts as well as their response to storm conditions requires proper representation
Electron conductance in curved quantum structures
DEFF Research Database (Denmark)
Willatzen, Morten; Gravesen, Jens
2010-01-01
A differential-geometry analysis is employed to investigate the transmission of electrons through a curved quantum-wire structure. Although the problem is a three-dimensional spatial problem, the Schrodinger equation can be separated into three general coordinates. Hence, the proposed method...
Principal normal indicatrices of closed space curves
DEFF Research Database (Denmark)
Røgen, Peter
1999-01-01
A theorem due to J. Weiner, which is also proven by B. Solomon, implies that a principal normal indicatrix of a closed space curve with nonvanishing curvature has integrated geodesic curvature zero and contains no subarc with integrated geodesic curvature pi. We prove that the inverse problem alw...
Yield stress independent column buckling curves
DEFF Research Database (Denmark)
Stan, Tudor‐Cristian; Jönsson, Jeppe
2017-01-01
Using GMNIA and shell finite element modelling of steel columns it is ascertained that the buckling curves for given imperfections and residual stresses are not only dependent on the relative slenderness ratio and the cross section shape but also on the magnitude of the yield stress. The influence...
Theoretical Magnon Dispersion Curves for Gd
DEFF Research Database (Denmark)
Lindgård, Per-Anker; Harmon, B. N.; Freeman, A. J.
1975-01-01
The magnon dispersion curve of Gd metal has been determined from first principles by use of augmented-plane-wave energy bands and wave functions. The exchange matrix elements I(k⃗, k⃗′) between the 4f electrons and the conduction electrons from the first six energy bands were calculated under...
ATLAS detector records its first curved muon
2007-01-01
The barrel muon spectrometer of the ATLAS detector has acquired its first cosmic event in a magnetic field produced by the barrel toroid magnet. This was an important test of the chambers in their final configurations, and marked the first triggering and measurement of curved cosmic ray muons in ATLAS.
Discrete groups, Mumford curves and Theta functions
Put, Marius van der
1992-01-01
A discrete group Γ given over some complete non archimedean valued field defines a curve X. The theta functions for Γ provide an analytic construction for the Jacobian variety of X. A theory of theta functions is developed with the help of currents on trees and graphs and the cohomology for Γ. In
Comparison and evaluation of mathematical lactation curve ...
African Journals Online (AJOL)
Using the General Linear Model procedure in SAS, the effect of herd, calving year, age at calving, season of production, age and days in milk were found to be significant on daily milk yield. The suitability of seven mathematical models (with three, four and five parameters) for describing the 305-day milk yield lactation curve ...
Affine LIBOR Models with Multiple Curves
DEFF Research Database (Denmark)
Grbac, Zorana; Papapantoleon, Antonis; Schoenmakers, John
2015-01-01
We introduce a multiple curve framework that combines tractable dynamics and semianalytic pricing formulas with positive interest rates and basis spreads. Negative rates and positive spreads can also be accommodated in this framework. The dynamics of overnight indexed swap and LIBOR rates...
Measuring Systematic Error with Curve Fits
Rupright, Mark E.
2011-01-01
Systematic errors are often unavoidable in the introductory physics laboratory. As has been demonstrated in many papers in this journal, such errors can present a fundamental problem for data analysis, particularly when comparing the data to a given model. In this paper I give three examples in which my students use popular curve-fitting software…
Principal G-bundles on nodal curves
Indian Academy of Sciences (India)
Springer Verlag Heidelberg #4 2048 1996 Dec 15 10:16:45
If Y is reducible these notions depend on parameters a = (a1,...,aI ). The study of G-bundles on Y is done by extending the notion of (generalized) parabolic vector bundles [U1] to generalized parabolic principal G-bundles (called GPGs in short) on the curve C and using the correspondence between them and principal ...
Growth Curves for Girls with Turner Syndrome
Directory of Open Access Journals (Sweden)
Fabio Bertapelli
2014-01-01
Full Text Available The objective of this study was to review the growth curves for Turner syndrome, evaluate the methodological and statistical quality, and suggest potential growth curves for clinical practice guidelines. The search was carried out in the databases Medline and Embase. Of 1006 references identified, 15 were included. Studies constructed curves for weight, height, weight/height, body mass index, head circumference, height velocity, leg length, and sitting height. The sample ranged between 47 and 1,565 (total = 6,273 girls aged 0 to 24 y, born between 1950 and 2006. The number of measures ranged from 580 to 9,011 (total = 28,915. Most studies showed strengths such as sample size, exclusion of the use of growth hormone and androgen, and analysis of confounding variables. However, the growth curves were restricted to height, lack of information about selection bias, limited distributional properties, and smoothing aspects. In conclusion, we observe the need to construct an international growth reference for girls with Turner syndrome, in order to provide support for clinical practice guidelines.
Principal normal indicatrices of closed space curves
DEFF Research Database (Denmark)
Røgen, Peter
1997-01-01
A theorem due to J. Weiner, which also is proven by B. Solomon, implies that a principal normal indicatrix of a closed space curve with non-vanishing curvature has integrated geodesic curvature zero and contains no sub arc with integrated geodesic curvature Pi. We prove that the inverse problem...
Tropical count of curves on abelian varieties
DEFF Research Database (Denmark)
Halle, Lars Halvard; Rose, Simon Charles Florian
2017-01-01
We investigate the problem of counting tropical genus g curves ing-dimensional tropical abelian varieties. We do this by studyingmaps from principally polarized tropical abelian varieties into afixed abelian variety. For g = 2, 3, we prove that the tropical countmatches the count provided in [Göt98...
Remote sensing used for power curves
DEFF Research Database (Denmark)
Wagner, Rozenn; Ejsing Jørgensen, Hans; Schmidt Paulsen, Uwe
2008-01-01
Power curve measurement for large wind turbines requires taking into account more parameters than only the wind speed at hub height. Based on results from aerodynamic simulations, an equivalent wind speed taking the wind shear into account was defined and found to reduce the power standard deviat...
Tempo curves considered harmful (part 1)
Desain, P.; Honing, H.
1991-01-01
A column (the first of a series of three) constitutes an abridged and adapted version of Tempo curves considered harmful . Two friends, an amateur mathematician (M) and a would-be psychologist (P), invited a retired pianist to do some experiments with their new sequencer program. As musical material
Prognostic and survival analysis of presbyopia: The healthy twin study
Lira, Adiyani; Sung, Joohon
2015-12-01
Presbyopia, a vision condition in which the eye loses its flexibility to focus on near objects, is part of ageing process which mostly perceptible in the early or mid 40s. It is well known that age is its major risk factor, while sex, alcohol, poor nutrition, ocular and systemic diseases are known as common risk factors. However, many other variables might influence the prognosis. Therefore in this paper we developed a prognostic model to estimate survival from presbyopia. 1645 participants which part of the Healthy Twin Study, a prospective cohort study that has recruited Korean adult twins and their family members based on a nation-wide registry at public health agencies since 2005, were collected and analyzed by univariate analysis as well as Cox proportional hazard model to reveal the prognostic factors for presbyopia while survival curves were calculated by Kaplan-Meier method. Besides age, sex, diabetes, and myopia; the proposed model shows that education level (especially engineering program) also contribute to the occurrence of presbyopia as well. Generally, at 47 years old, the chance of getting presbyopia becomes higher with the survival probability is less than 50%. Furthermore, our study shows that by stratifying the survival curve, MZ has shorter survival with average onset time about 45.8 compare to DZ and siblings with 47.5 years old. By providing factors that have more effects and mainly associate with presbyopia, we expect that we could help to design an intervention to control or delay its onset time.
Survival after blood transfusion
DEFF Research Database (Denmark)
Kamper-Jørgensen, Mads; Ahlgren, Martin; Rostgaard, Klaus
2008-01-01
of transfusion recipients in Denmark and Sweden followed for up to 20 years after their first blood transfusion. Main outcome measure was all-cause mortality. RESULTS: A total of 1,118,261 transfusion recipients were identified, of whom 62.0 percent were aged 65 years or older at the time of their first...... the SMR remained significantly 1.3-fold increased. CONCLUSION: The survival and relative mortality patterns among blood transfusion recipients were characterized with unprecedented detail and precision. Our results are relevant to assessments of the consequences of possible transfusion-transmitted disease......BACKGROUND: Long-term survival of transfusion recipients has rarely been studied. This study examines short- and long-term mortality among transfusion recipients and reports these as absolute rates and rates relative to the general population. STUDY DESIGN AND METHODS: Population-based cohort study...
Salvage Therapy of Multiple Myeloma: The New Generation Drugs
Directory of Open Access Journals (Sweden)
Alessandra Romano
2014-01-01
Full Text Available During the past decade, overall results of treatment of multiple myeloma (MM have been improved and survival curves are now significantly better with respect to those obtained with historical treatment. These improvements are linked to a deeper knowledge of the biology of disease and to the introduction in clinical practice of drugs with different mechanism of action such as proteasome inhibitors and immunomodulatory drugs (IMiDs. However, MM remains in most cases an incurable disease. For patients who relapse after treatment with novel agents, the prognosis is dismal and new drugs and therapeutic strategies are required for continued disease control. In this review, we summarize new insights in salvage therapy for relapsed/refractory MM as emerging from recent clinical trials exploring the activity of bendamustine, new generation proteasome inhibitors, novel IMiDs, monoclonal antibodies, and drugs interfering with growth pathways.
Salvage Therapy of Multiple Myeloma: The New Generation Drugs
Romano, Alessandra; Conticello, Concetta; Di Raimondo, Cosimo; Schinocca, Elena; La Fauci, Alessia; Parrinello, Nunziatina Laura; Chiarenza, Annalisa
2014-01-01
During the past decade, overall results of treatment of multiple myeloma (MM) have been improved and survival curves are now significantly better with respect to those obtained with historical treatment. These improvements are linked to a deeper knowledge of the biology of disease and to the introduction in clinical practice of drugs with different mechanism of action such as proteasome inhibitors and immunomodulatory drugs (IMiDs). However, MM remains in most cases an incurable disease. For patients who relapse after treatment with novel agents, the prognosis is dismal and new drugs and therapeutic strategies are required for continued disease control. In this review, we summarize new insights in salvage therapy for relapsed/refractory MM as emerging from recent clinical trials exploring the activity of bendamustine, new generation proteasome inhibitors, novel IMiDs, monoclonal antibodies, and drugs interfering with growth pathways. PMID:24967371
Visualizing Nonlinear Narratives with Story Curves.
Kim, Nam Wook; Bach, Benjamin; Im, Hyejin; Schriber, Sasha; Gross, Markus; Pfister, Hanspeter
2018-01-01
In this paper, we present story curves, a visualization technique for exploring and communicating nonlinear narratives in movies. A nonlinear narrative is a storytelling device that portrays events of a story out of chronological order, e.g., in reverse order or going back and forth between past and future events. Many acclaimed movies employ unique narrative patterns which in turn have inspired other movies and contributed to the broader analysis of narrative patterns in movies. However, understanding and communicating nonlinear narratives is a difficult task due to complex temporal disruptions in the order of events as well as no explicit records specifying the actual temporal order of the underlying story. Story curves visualize the nonlinear narrative of a movie by showing the order in which events are told in the movie and comparing them to their actual chronological order, resulting in possibly meandering visual patterns in the curve. We also present Story Explorer, an interactive tool that visualizes a story curve together with complementary information such as characters and settings. Story Explorer further provides a script curation interface that allows users to specify the chronological order of events in movies. We used Story Explorer to analyze 10 popular nonlinear movies and describe the spectrum of narrative patterns that we discovered, including some novel patterns not previously described in the literature. Feedback from experts highlights potential use cases in screenplay writing and analysis, education and film production. A controlled user study shows that users with no expertise are able to understand visual patterns of nonlinear narratives using story curves.
TELECOMMUNICATIONS INFRASTRUCTURE AND GDP /JIPP CURVE/
Directory of Open Access Journals (Sweden)
Mariana Kaneva
2016-07-01
Full Text Available The relationship between telecommunications infrastructure and economic activity is under discussion in many scientific papers. Most of the authors use for research and analysis the Jipp curve. A lot of doubts about the correctness of the Jipp curve appear in terms of applying econometric models. The aim of this study is a review of the Jipp curve, refining the possibility of its application in modern conditions. The methodology used in the study is based on dynamic econometric models, including tests for nonstationarity and tests for causality. The focus of this study is directed to methodological problems in measuring the local density types of telecommunication networks. This study offers a specific methodology for assessing the Jipp law, through VAR-approach and Granger causality tests. It is proved that mechanical substitution of momentary aggregated variables (such as the number of subscribers of a telecommunication network at the end of the year and periodically aggregated variables (such as GDP per capita in the Jipp�s curve is methodologically wrong. Researchers have to reconsider the relationship set in the Jipp�s curve by including additional variables that characterize the Telecommunications sector and the economic activity in a particular country within a specified time period. GDP per capita should not be regarded as a single factor for the local density of telecommunications infrastructure. New econometric models studying the relationship between the investments in telecommunications infrastructure and economic development may be not only linear regression models, but also other econometric models. New econometric models should be proposed after testing and validating with sound economic theory and econometric methodology.
Curved bones: An adaptation to habitual loading.
Milne, Nick
2016-10-21
Why are long bones curved? It has long been considered a paradox that many long bones supporting mammalian bodies are curved, since this curvature results in the bone undergoing greater bending, with higher strains and so greater fracture risk under load. This study develops a theoretical model wherein the curvature is a response to bending strains imposed by the requirements of locomotion. In particular the radioulna of obligate quadrupeds is a lever operated by the triceps muscle, and the bending strains induced by the triceps muscle counter the bending resulting from longitudinal loads acting on the curved bone. Indeed the theoretical model reverses this logic and suggests that the curvature is itself a response to the predictable bending strains induced by the triceps muscle. This, in turn, results in anatomical arrangements of bone, muscle and tendon that create a simple physiological mechanism whereby the bone can resist the bending due to the action of triceps in supporting and moving the body. The model is illustrated by contrasting the behaviour of a finite element model of a llama radioulna to that of a straightened version of the same bone. The results show that longitudinal and flexor muscle forces produce bending strains that effectively counter strains due to the pull of the triceps muscle in the curved but not in the straightened model. It is concluded that the curvature of these and other curved bones adds resilience to the skeleton by acting as pre-stressed beams or strainable pre-buckled struts. It is also proposed that the cranial bending strains that result from triceps, acting on the lever that is the radioulna, can explain the development of the curvature of such bones. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.
Trend analyses with river sediment rating curves
Warrick, Jonathan A.
2015-01-01
Sediment rating curves, which are fitted relationships between river discharge (Q) and suspended-sediment concentration (C), are commonly used to assess patterns and trends in river water quality. In many of these studies it is assumed that rating curves have a power-law form (i.e., C = aQb, where a and b are fitted parameters). Two fundamental questions about the utility of these techniques are assessed in this paper: (i) How well to the parameters, a and b, characterize trends in the data? (ii) Are trends in rating curves diagnostic of changes to river water or sediment discharge? As noted in previous research, the offset parameter, a, is not an independent variable for most rivers, but rather strongly dependent on b and Q. Here it is shown that a is a poor metric for trends in the vertical offset of a rating curve, and a new parameter, â, as determined by the discharge-normalized power function [C = â (Q/QGM)b], where QGM is the geometric mean of the Q values sampled, provides a better characterization of trends. However, these techniques must be applied carefully, because curvature in the relationship between log(Q) and log(C), which exists for many rivers, can produce false trends in â and b. Also, it is shown that trends in â and b are not uniquely diagnostic of river water or sediment supply conditions. For example, an increase in â can be caused by an increase in sediment supply, a decrease in water supply, or a combination of these conditions. Large changes in water and sediment supplies can occur without any change in the parameters, â and b. Thus, trend analyses using sediment rating curves must include additional assessments of the time-dependent rates and trends of river water, sediment concentrations, and sediment discharge.
SURVIVAL ANALYSIS AND LENGTH-BIASED SAMPLING
Directory of Open Access Journals (Sweden)
Masoud Asgharian
2010-12-01
Full Text Available When survival data are colleted as part of a prevalent cohort study, the recruited cases have already experienced their initiating event. These prevalent cases are then followed for a fixed period of time at the end of which the subjects will either have failed or have been censored. When interests lies in estimating the survival distribution, from onset, of subjects with the disease, one must take into account that the survival times of the cases in a prevalent cohort study are left truncated. When it is possible to assume that there has not been any epidemic of the disease over the past period of time that covers the onset times of the subjects, one may assume that the underlying incidence process that generates the initiating event times is a stationary Poisson process. Under such assumption, the survival times of the recruited subjects are called “lengthbiased”. I discuss the challenges one is faced with in analyzing these type of data. To address the theoretical aspects of the work, I present asymptotic results for the NPMLE of the length-biased as well as the unbiased survival distribution. I also discuss estimating the unbiased survival function using only the follow-up time. This addresses the case that the onset times are either unknown or known with uncertainty. Some of our most recent work and open questions will be presented. These include some aspects of analysis of covariates, strong approximation, functional LIL and density estimation under length-biased sampling with right censoring. The results will be illustrated with survival data from patients with dementia, collected as part of the Canadian Study of Health and Aging (CSHA.
Survival analysis models and applications
Liu, Xian
2012-01-01
Survival analysis concerns sequential occurrences of events governed by probabilistic laws. Recent decades have witnessed many applications of survival analysis in various disciplines. This book introduces both classic survival models and theories along with newly developed techniques. Readers will learn how to perform analysis of survival data by following numerous empirical illustrations in SAS. Survival Analysis: Models and Applications: Presents basic techniques before leading onto some of the most advanced topics in survival analysis.Assumes only a minimal knowledge of SAS whilst enablin
Paleomagnetic analysis of curved thrust belts reproduced by physical models
Costa, Elisabetta; Speranza, Fabio
2003-12-01
This paper presents a new methodology for studying the evolution of curved mountain belts by means of paleomagnetic analyses performed on analogue models. Eleven models were designed aimed at reproducing various tectonic settings in thin-skinned tectonics. Our models analyze in particular those features reported in the literature as possible causes for peculiar rotational patterns in the outermost as well as in the more internal fronts. In all the models the sedimentary cover was reproduced by frictional low-cohesion materials (sand and glass micro-beads), which detached either on frictional or on viscous layers. These latter were reproduced in the models by silicone. The sand forming the models has been previously mixed with magnetite-dominated powder. Before deformation, the models were magnetized by means of two permanent magnets generating within each model a quasi-linear magnetic field of intensity variable between 20 and 100 mT. After deformation, the models were cut into closely spaced vertical sections and sampled by means of 1×1-cm Plexiglas cylinders at several locations along curved fronts. Care was taken to collect paleomagnetic samples only within virtually undeformed thrust sheets, avoiding zones affected by pervasive shear. Afterwards, the natural remanent magnetization of these samples was measured, and alternating field demagnetization was used to isolate the principal components. The characteristic components of magnetization isolated were used to estimate the vertical-axis rotations occurring during model deformation. We find that indenters pushing into deforming belts from behind form non-rotational curved outer fronts. The more internal fronts show oroclinal-type rotations of a smaller magnitude than that expected for a perfect orocline. Lateral symmetrical obstacles in the foreland colliding with forward propagating belts produce non-rotational outer curved fronts as well, whereas in between and inside the obstacles a perfect orocline forms
DEFF Research Database (Denmark)
Rhodes, Andrew; Evans, Laura E; Alhazzani, Waleed
2017-01-01
, and evidence profiles were generated. Each subgroup generated a list of questions, searched for best available evidence, and then followed the principles of the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) system to assess the quality of evidence from high to very low...
A dose-response curve for biodosimetry from a 6 MV electron linear accelerator
Energy Technology Data Exchange (ETDEWEB)
Lemos-Pinto, M.M.P.; Cadena, M.; Santos, N.; Fernandes, T.S.; Borges, E.; Amaral, A., E-mail: marcelazoo@yahoo.com.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear
2015-10-15
Biological dosimetry (biodosimetry) is based on the investigation of radiation-induced biological effects (biomarkers), mainly dicentric chromosomes, in order to correlate them with radiation dose. To interpret the dicentric score in terms of absorbed dose, a calibration curve is needed. Each curve should be constructed with respect to basic physical parameters, such as the type of ionizing radiation characterized by low or high linear energy transfer (LET) and dose rate. This study was designed to obtain dose calibration curves by scoring of dicentric chromosomes in peripheral blood lymphocytes irradiated in vitro with a 6 MV electron linear accelerator (Mevatron M, Siemens, USA). Two software programs, CABAS (Chromosomal Aberration Calculation Software) and Dose Estimate, were used to generate the curve. The two software programs are discussed; the results obtained were compared with each other and with other published low LET radiation curves. Both software programs resulted in identical linear and quadratic terms for the curve presented here, which was in good agreement with published curves for similar radiation quality and dose rates. (author)
Sildenafil Increases the p50 and Shifts the Oxygen-Hemoglobin Dissociation Curve to the Right.
Ellis, Shantol Sastrice; Pepple, Dagogo John
2015-12-01
Sildenafil (Viagra®) is a selective phosphodiesterase type 5 (PDE5) inhibitor that block the breakdown of cyclic guanyl monophosphate (cGMP) leading to relaxation of the smooth muscles of the corpus cavernous and an increase in blood flow resulting in penile erection. It is hypothesized that sildenafil will increase the release of oxygen from erythrocytes and shift the oxygen-hemoglobin curve to the right. The aim of this study was to investigate the effect of varying doses of sildenafil on the p50 of the oxygen-hemoglobin dissociation curve in blood samples from eight (8) healthy adult male volunteers with normal hemoglobin HbAA. The hemox-analyzer was used to generate the p50 and the oxygen-hemoglobin dissociation curves. The effect of different doses of sildenafil on the p50 values and shift of the oxygen-hemoglobin curve were the main outcome measures. Sildenafil caused a statistically significant increase in the p50 values and rightward shift of the oxygen-hemoglobin dissociation curve. Sildenafil caused a dose-dependent increase in the release of oxygen from the erythrocytes as shown by the increased p50 values and rightward shift of the oxygen-hemoglobin dissociation curve. Ellis SS and Pepple DJ. Sildenafil increases the p50 and shifts the oxygen-hemoglobin dissociation curve to the right. © 2015 International Society for Sexual Medicine.
A dose-response curve for biodosimetry from a 6 MV electron linear accelerator.
Lemos-Pinto, M M P; Cadena, M; Santos, N; Fernandes, T S; Borges, E; Amaral, A
2015-10-01
Biological dosimetry (biodosimetry) is based on the investigation of radiation-induced biological effects (biomarkers), mainly dicentric chromosomes, in order to correlate them with radiation dose. To interpret the dicentric score in terms of absorbed dose, a calibration curve is needed. Each curve should be constructed with respect to basic physical parameters, such as the type of ionizing radiation characterized by low or high linear energy transfer (LET) and dose rate. This study was designed to obtain dose calibration curves by scoring of dicentric chromosomes in peripheral blood lymphocytes irradiated in vitro with a 6 MV electron linear accelerator (Mevatron M, Siemens, USA). Two software programs, CABAS (Chromosomal Aberration Calculation Software) and Dose Estimate, were used to generate the curve. The two software programs are discussed; the results obtained were compared with each other and with other published low LET radiation curves. Both software programs resulted in identical linear and quadratic terms for the curve presented here, which was in good agreement with published curves for similar radiation quality and dose rates.
Low Survival Rates of Oral and Oropharyngeal Squamous Cell Carcinoma
Directory of Open Access Journals (Sweden)
Anna Carolina Omena Vasconcellos Le Campion
2017-01-01
Full Text Available Aim. To assess the epidemiological and clinical factors that influence the prognosis of oral and oropharyngeal squamous cell carcinoma (SCC. Methods. One hundred and twenty-one cases of oral and oropharyngeal SCC were selected. The survival curves for each variable were estimated using the Kaplan-Meier method. The Cox regression model was applied to assess the effect of the variables on survival. Results. Cancers at an advanced stage were observed in 103 patients (85.1%. Cancers on the tongue were more frequent (23.1%. The survival analysis was 59.9% in one year, 40.7% in two years, and 27.8% in 5 years. There was a significant low survival rate linked to alcohol intake (p=0.038, advanced cancer staging (p=0.003, and procedures without surgery (p<0.001. When these variables were included in the Cox regression model only surgery procedures (p=0.005 demonstrated a significant effect on survival. Conclusion. The findings suggest that patients who underwent surgery had a greater survival rate compared with those that did not. The low survival rates and the high percentage of patients diagnosed at advanced stages demonstrate that oral and oropharyngeal cancer patients should receive more attention.
Directory of Open Access Journals (Sweden)
Mohsen Gerami
2017-02-01
Full Text Available Fragility curves play an important role in damage assessment of buildings. Probability of damage induction to the structure against seismic events can be investigated upon generation of afore mentioned curves. In current research 360 time history analyses have been carried out on structures of 3, 10 and 20 story height and subsequently fragility curves have been adopted. The curves are developed based on two indices of inter story drifts and equivalent strip axial strains of the shear wall. Time history analysis is carried out in Perform 3d considering 10 far field seismograms and 10 near fields. Analysis of low height structures revealed that they are more vulnerable in accelerations lower than 0.8 g in near field earthquakes because of higher mode effects. Upon the generated fragility curves it was observed that middle and high structures have more acceptable performance and lower damage levels compared to low height structures in both near and far field seismic hazards.
Mukkamala, R.; Cohen, R. J.; Mark, R. G.
2002-01-01
Guyton developed a popular approach for understanding the factors responsible for cardiac output (CO) regulation in which 1) the heart-lung unit and systemic circulation are independently characterized via CO and venous return (VR) curves, and 2) average CO and right atrial pressure (RAP) of the intact circulation are predicted by graphically intersecting the curves. However, this approach is virtually impossible to verify experimentally. We theoretically evaluated the approach with respect to a nonlinear, computational model of the pulsatile heart and circulation. We developed two sets of open circulation models to generate CO and VR curves, differing by the manner in which average RAP was varied. One set applied constant RAPs, while the other set applied pulsatile RAPs. Accurate prediction of intact, average CO and RAP was achieved only by intersecting the CO and VR curves generated with pulsatile RAPs because of the pulsatility and nonlinearity (e.g., systemic venous collapse) of the intact model. The CO and VR curves generated with pulsatile RAPs were also practically independent. This theoretical study therefore supports the validity of Guyton's graphical analysis.
Continuous measurement of soil-water characteristic curves at low suction levels
Ray, Richard; Bene, Katalin
2017-04-01
The soil-water characteristic curve (SWCC) is an important piece of information for understanding unsaturated soil behavior. With few exceptions, most of the SWCCs are developed as discrete points and are typically generated under drying path. This study presents results from automated tests that typically draw suction values to about 1 bar. Tempe cells are used with the axis translation method to generate the curves. Soils tested include fine sand, silty, and clayey sands. While a typical test starts in a saturated state and generates a drying curve, the test can be reversed any number of times to produce hysteresis behavior. Another advantage to the method is time efficiency since a curve with thousands of data points are produced in less than a week. However, careful consideration has to be made with regard to extraction rate, especially as the specimen becomes dryer. Several data sets are presented illustrating good and problematic behavior as well as hysteresis. Some suggestions are given concerning the selection of extraction rates or adjusting curves to account for extraction rate effects.
Approximate Implicitization of Parametric Curves Using Cubic Algebraic Splines
Directory of Open Access Journals (Sweden)
Xiaolei Zhang
2009-01-01
Full Text Available This paper presents an algorithm to solve the approximate implicitization of planar parametric curves using cubic algebraic splines. It applies piecewise cubic algebraic curves to give a global G2 continuity approximation to planar parametric curves. Approximation error on approximate implicitization of rational curves is given. Several examples are provided to prove that the proposed method is flexible and efficient.
Evaluation of the water retention curve of Abidjan Quaternary aquifer ...
African Journals Online (AJOL)
Methods and Results: The water retention curve is difficult to measure in situ on large sites like this aquifer. Kovac's modified model to predict the water retention curve is tested. Predicted curves are compared with in situ measurements points. The results show that, overall, the model predicts well the water retention curves.
International Nuclear Information System (INIS)
Shakespeare, T.P.; Mukherjee, R.K.; Gebski, V.J.
2003-01-01
Confidence levels, clinical significance curves, and risk-benefit contours are tools improving analysis of clinical studies and minimizing misinterpretation of published results, however no software has been available for their calculation. The objective was to develop software to help clinicians utilize these tools. Excel 2000 spreadsheets were designed using only built-in functions, without macros. The workbook was protected and encrypted so that users can modify only input cells. The workbook has 4 spreadsheets for use in studies comparing two patient groups. Sheet 1 comprises instructions and graphic examples for use. Sheet 2 allows the user to input the main study results (e.g. survival rates) into a 2-by-2 table. Confidence intervals (95%), p-value and the confidence level for Treatment A being better than Treatment B are automatically generated. An additional input cell allows the user to determine the confidence associated with a specified level of benefit. For example if the user wishes to know the confidence that Treatment A is at least 10% better than B, 10% is entered. Sheet 2 automatically displays clinical significance curves, graphically illustrating confidence levels for all possible benefits of one treatment over the other. Sheet 3 allows input of toxicity data, and calculates the confidence that one treatment is more toxic than the other. It also determines the confidence that the relative toxicity of the most effective arm does not exceed user-defined tolerability. Sheet 4 automatically calculates risk-benefit contours, displaying the confidence associated with a specified scenario of minimum benefit and maximum risk of one treatment arm over the other. The spreadsheet is freely downloadable at www.ontumor.com/professional/statistics.htm A simple, self-explanatory, freely available spreadsheet calculator was developed using Excel 2000. The incorporated decision-making tools can be used for data analysis and improve the reporting of results of any
Cell Proliferation on Planar and Curved Substrates
Gaines, Michelle; Chang, Ya Wen; Cruz, Ricardo; Fragkopoulos, Alexandros; Garcia, Andres; Fernandez-Nieves, Alberto
Aberrant epithelial collective cell growth is one of the major challenges to be addressed in order to treat diseases such as cancer and organ fibrosis. The conditions of the extracellular microenvironment, properties of the cells' cytoskeleton, and interfacial properties of the substratum (the surface in contact with epithelial cells) have a significant influence on the migratory behavior of epithelial cells, cell proliferation and migration. This work focuses on understanding the impact the substratum curvature has on cell behavior. We focus on cell proliferation first and study MDCK cells on both planar and curved hydrogel substrates. The curved hydrogels are based on polyacrylamide and have toroidal shape, with tube radius 200 um and an aspect ratio in the rage between 2 and 9. Proliferation is measured using the Click-it EDU assay (Invitrogen), which measures cells that are synthesizing DNA. Funding Source is Childrens Healthcare of Atlanta.
Gauge field configurations in curved spacetimes (II)
International Nuclear Information System (INIS)
Boutaleb-Joutei, H.; Chakrabarti, A.; Comtet, A.
1979-05-01
One continues the study of gauge field configurations in curved spaces, using the formalism and results of a previous paper. A class of static, finite action, selfdual solutions of SU(2) gauge fields on a Euclidean section of de Sitter space is presented. The action depends on a continuous parameter. The spin connection solution is obtained as a particular case and a certain passage to the limiting case of a flat space is shown to reproduce the Euclidean Prasad-Sommerfield solution. The significance and possible interest of such solutions are discussed. The results are then generalized to a non-Einstein but conformally flat space, including de Sitter space as an Einstein limit. Next Baecklund type transformations are constructed starting from selfduality constraints for such curved spaces. These transformations are applied to the above mentioned solutions. The last two sections contain remarks on solutions with a background Robinson-Bertotti metric and on static, axially symmetric solutions respectively
Inferring cardiac phase response curve in vivo
Pikovsky, Arkady; Kralemann, Bjoern; Fruehwirth, Matthias; Rosenblum, Michael; Kenner, Thomas; Schaefer, Jochen; Moser, Maximilian
2014-03-01
Characterizing properties of biological oscillators with phase response cirves (PRC) is one of main theoretical tools in neuroscience, cardio-respiratory physiology, and chronobiology. We present a technique that allows the extraction of the PRC from a non-invasive observation of a system consisting of two interacting oscillators, in this case heartbeat and respiration, in its natural environment and under free-running conditions. We use this method to obtain the phase coupling functions describing cardio-respiratory interactions and the phase response curve of 17 healthy humans. We show at which phase the cardiac beat is susceptible to respiratory drive and extract the respiratory-related component of heart rate variability. This non-invasive method of bivariate data analysis for the determination of phase response curves of coupled oscillators may find application in other biological and physical systems.