WorldWideScience

Sample records for survival craft equipment

  1. 46 CFR 180.175 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft equipment. 180.175 Section 180.175... TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.175 Survival craft equipment. (a) General. Each item of survival craft equipment must be of good quality, and...

  2. 46 CFR 117.175 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft equipment. 117.175 Section 117.175... AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.175 Survival craft equipment. (a) General. Each item of survival craft equipment must be of good quality, and efficient for the purpose it...

  3. 46 CFR 28.130 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Survival craft equipment. 28.130 Section 28.130 Shipping... INDUSTRY VESSELS Requirements for All Vessels § 28.130 Survival craft equipment. (a) General. Each item of survival craft equipment must be of good quality, effective for the purpose it is intended to serve, and...

  4. 47 CFR 80.1095 - Survival craft equipment.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Survival craft equipment. 80.1095 Section 80... for Ship Stations § 80.1095 Survival craft equipment. (a) At least three two-way VHF radiotelephone... they can be rapidly placed in any survival craft other than life rafts required by Regulation III/26.1...

  5. 46 CFR 199.175 - Survival craft and rescue boat equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft and rescue boat equipment. 199.175....175 Survival craft and rescue boat equipment. (a) All lifeboat and rescue boat equipment— (1) Must be... craft or rescue boat; or (iii) Overload the launching appliance. (b) Each lifeboat, rigid liferaft, and...

  6. 46 CFR 199.201 - Survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft. 199.201 Section 199.201 Shipping COAST... craft. (a) Each survival craft must be approved and equipped as follows: (1) Each lifeboat must be... addition to the survival craft required in paragraph (b)(1) of this section, additional liferafts must be...

  7. 46 CFR 199.261 - Survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft. 199.261 Section 199.261 Shipping COAST... SYSTEMS FOR CERTAIN INSPECTED VESSELS Additional Requirements for Cargo Vessels § 199.261 Survival craft. (a) Each survival craft must be approved and equipped as follows: (1) Each lifeboat must be a totally...

  8. 46 CFR 133.105 - Survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft. 133.105 Section 133.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.105 Survival craft. (a) Each survival craft must be approved and equipped as...

  9. 46 CFR 117.150 - Survival craft embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft embarkation arrangements. 117.150 Section... EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.150 Survival craft embarkation... apparatus when either— (1) The embarkation station for the survival craft is on a deck more than 4.5 meters...

  10. 46 CFR 180.130 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 180.130 Section 180.130... TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.130 Stowage of survival craft. (a) Each survival craft must be: (1) Secured to the vessel by a painter with a...

  11. 46 CFR 117.130 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of survival craft. 117.130 Section 117.130... AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.130 Stowage of survival craft. (a) Each survival craft must be: (1) Secured to the vessel by a painter with a float-free link permanently...

  12. 46 CFR 180.150 - Survival craft embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation arrangements. 180.150 Section... (UNDER 100 GROSS TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.150 Survival craft embarkation arrangements. (a) A launching appliance approved under approval...

  13. 46 CFR 108.530 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of survival craft. 108.530 Section 108.530... AND EQUIPMENT Lifesaving Equipment § 108.530 Stowage of survival craft. (a) General. Each survival craft required to be served by a launching appliance or marine evacuation system must be stowed as...

  14. 46 CFR 108.525 - Survival craft number and arrangement.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft number and arrangement. 108.525 Section... UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.525 Survival craft number and arrangement. (a... arrangement of survival craft: (1) Lifeboats with an aggregate capacity to accommodate the total number of...

  15. 46 CFR 180.200 - Survival craft-general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-general. 180.200 Section 180.200 Shipping...) LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 180.200 Survival craft—general. (a) Each survival craft required on a vessel by this part must meet one of the following: (1) For an...

  16. 46 CFR 122.518 - Inflatable survival craft placards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Inflatable survival craft placards. 122.518 Section 122... Preparations for Emergencies § 122.518 Inflatable survival craft placards. (a) Every vessel equipped with an inflatable survival craft must have approved placards or other cards containing instructions for launching...

  17. 46 CFR 185.518 - Inflatable survival craft placards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Inflatable survival craft placards. 185.518 Section 185... 100 GROSS TONS) OPERATIONS Preparations for Emergencies § 185.518 Inflatable survival craft placards. (a) Every vessel equipped with an inflatable survival craft must have approved placards or other...

  18. 46 CFR 108.520 - Type of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Type of survival craft. 108.520 Section 108.520 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.520 Type of survival craft. (a) Each lifeboat must be a fire-protected...

  19. 46 CFR 108.540 - Survival craft muster and embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft muster and embarkation arrangements. 108... OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.540 Survival craft muster and... craft muster station and embarkation station for a survival craft which is boarded before it is launched...

  20. 46 CFR 117.205 - Survival craft-vessels operating on limited coastwise routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on limited coastwise... PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.205 Survival craft... the survival craft required by §§ 117.204 (a) through (d) of this part, as applicable. (b) Each vessel...

  1. 46 CFR 117.204 - Survival craft-vessels operating on coastwise routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on coastwise routes... PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.204 Survival craft... allowed, the following survival craft requirements apply when not engaged in an overnight voyage: (1...

  2. 46 CFR 117.206 - Survival craft-vessels operating on Great Lakes routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on Great Lakes routes... PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.206 Survival craft... vessel certificated to operate on a Great Lakes route must be provided with the survival craft required...

  3. 46 CFR 28.120 - Survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Survival craft. 28.120 Section 28.120 Shipping COAST... VESSELS Requirements for All Vessels § 28.120 Survival craft. (a) Except as provided in paragraphs (b) through (h) of this section and 28.305, each vessel must carry the survival craft specified in Table 28...

  4. 46 CFR 108.550 - Survival craft launching and recovery arrangements: General.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft launching and recovery arrangements...-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.550 Survival craft.... (c) Each survival craft must be arranged to clear each leg, column, footing, brace, mat, and each...

  5. 33 CFR 149.305 - What are the survival craft requirements for temporary personnel?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What are the survival craft... EQUIPMENT Lifesaving Equipment Manned Deepwater Port Requirements § 149.305 What are the survival craft... complement exceeds the capacity of the survival craft required under § 149.304 of this subpart, the port must...

  6. 46 CFR 117.202 - Survival craft-vessels operating on oceans routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on oceans routes. 117... LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.202 Survival craft—vessels... number of overnight persons allowed, the survival craft requirements contained in paragraph (e) of this...

  7. 46 CFR 117.208 - Survival craft-vessels operating on rivers routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on rivers routes. 117... LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.208 Survival craft—vessels... vessel certificated to operate on a rivers route in warm water is not required to carry survival craft...

  8. 33 CFR 149.313 - How must survival craft be arranged?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How must survival craft be... Equipment Manned Deepwater Port Requirements § 149.313 How must survival craft be arranged? The operator must arrange survival craft so that they meet the requirements of 46 CFR 108.525 (a) and § 108.530 and...

  9. 46 CFR 109.323 - Manning of survival craft and supervision.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Manning of survival craft and supervision. 109.323... DRILLING UNITS OPERATIONS Operation and Stowage of Safety Equipment § 109.323 Manning of survival craft and supervision. (a) There must be a sufficient number of trained persons on board the survival craft for...

  10. 46 CFR 117.200 - Survival craft-general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-general. 117.200 Section 117.200 Shipping... Number and Type of Survival Craft § 117.200 Survival craft—general. (a) Each survival craft required on a... craft they replace. (c) A summary of survival craft requirements is provided in Table 117.200(c). Table...

  11. 46 CFR 133.130 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of survival craft. 133.130 Section 133.130... SYSTEMS Requirements for All OSVs § 133.130 Stowage of survival craft. (a) General. Each survival craft must be stowed as follows: (1) Each survival craft must be as close to the accommodation and service...

  12. 46 CFR 28.310 - Launching of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Launching of survival craft. 28.310 Section 28.310... Operate With More Than 16 Individuals on Board § 28.310 Launching of survival craft. A gate or other... each survival craft which weighs more than 110 pounds (489 Newtons), to allow the survival craft to be...

  13. 46 CFR 199.130 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 199.130 Section 199.130... craft. (a) General. Each survival craft must be stowed— (1) As close to the accommodation and service spaces as possible; (2) So that neither the survival craft nor its stowage arrangements will interfere...

  14. 46 CFR 180.202 - Survival craft-vessels operating on oceans routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on oceans routes. 180... VESSELS (UNDER 100 GROSS TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 180.202 Survival craft—vessels operating on oceans routes. (a) Each vessel certificated to operate on...

  15. 46 CFR 117.207 - Survival craft-vessels operating on lakes, bays, and sounds routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft-vessels operating on lakes, bays, and... 49 PASSENGERS LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 117.207 Survival craft—vessels operating on lakes, bays, and sounds routes. (a) Each vessel with overnight...

  16. 46 CFR 180.208 - Survival craft-vessels operating on rivers routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on rivers routes. 180... VESSELS (UNDER 100 GROSS TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Number and Type of Survival Craft § 180.208 Survival craft—vessels operating on rivers routes. (a) Except as allowed by paragraphs (c), (d...

  17. 46 CFR 199.230 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 199.230 Section 199.230... Stowage of survival craft. (a) To meet the requirements of § 199.130(b)(1), each lifeboat on a passenger... height of a survival craft must take into account the vessel's escape provisions, the vessel's size, and...

  18. 46 CFR 199.290 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 199.290 Section 199.290... of survival craft. (a) To meet the requirements of § 199.130(b)(1), each lifeboat— (1) On a cargo... required under § 199.261(e), no stowage position or muster and embarkation station for a survival craft on...

  19. 46 CFR 28.805 - Launching of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Launching of survival craft. 28.805 Section 28.805... FISHING INDUSTRY VESSELS Aleutian Trade Act Vessels § 28.805 Launching of survival craft. In addition to the survival craft requirements in subpart B, each vessel must have a gate or other opening in the...

  20. 46 CFR 28.125 - Stowage of survival craft.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Stowage of survival craft. 28.125 Section 28.125... FISHING INDUSTRY VESSELS Requirements for All Vessels § 28.125 Stowage of survival craft. (a) Each..., inflatable buoyant apparatus, and any auxiliary craft used in their place, must be kept readily accessible...

  1. 33 CFR 149.310 - What are the muster and embarkation requirements for survival craft?

    Science.gov (United States)

    2010-07-01

    ... embarkation requirements for survival craft? 149.310 Section 149.310 Navigation and Navigable Waters COAST... and embarkation requirements for survival craft? Muster and embarkation arrangements for survival craft must comply with 46 CFR 108.540. ...

  2. 33 CFR 146.120 - Manning of survival craft.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Manning of survival craft. 146.120 Section 146.120 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... craft. The owner, the owner's agent, or the person in charge shall assign a person to each life float...

  3. 47 CFR 80.223 - Special requirements for survival craft stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Special requirements for survival craft... requirements for survival craft stations. (a) Survival craft stations capable of transmitting on: (1) 2182 kHz... operate with A3E or A3N emission. (b) Survival craft stations must be able to receive the frequency and...

  4. 46 CFR 111.75-16 - Lighting of survival craft and rescue boats.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Lighting of survival craft and rescue boats. 111.75-16... craft and rescue boats. (a) During preparation, launching, and recovery, each survival craft and rescue... of circuits must be such that the lighting for adjacent launching stations for survival craft or...

  5. 46 CFR 180.207 - Survival craft-vessels operating on lakes, bays, and sounds routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on lakes, bays, and... Survival Craft § 180.207 Survival craft—vessels operating on lakes, bays, and sounds routes. (a) Except as... warm water is not required to carry survival craft. (d) A vessel certificated to operate on lakes, bays...

  6. 46 CFR 199.220 - Survival craft and rescue boat embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft and rescue boat embarkation arrangements... APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS Additional Requirements for Passenger Vessels § 199.220 Survival craft and rescue boat embarkation arrangements. (a) Survival craft...

  7. 46 CFR 199.110 - Survival craft muster and embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft muster and embarkation arrangements. 199... § 199.110 Survival craft muster and embarkation arrangements. (a) Each muster station must have... emergency source of electrical power. (e) Each davit-launched and free-fall survival craft muster station...

  8. 46 CFR 180.206 - Survival craft-vessels operating on Great Lakes routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on Great Lakes routes... Craft § 180.206 Survival craft—vessels operating on Great Lakes routes. (a) Except as allowed by... with the survival craft required by § 180.205 (a) through (e), as appropriate. (b) Each vessel...

  9. 46 CFR 199.150 - Survival craft launching and recovery arrangements; general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft launching and recovery arrangements... Vessels § 199.150 Survival craft launching and recovery arrangements; general. (a)(1) Each launching...) Unless expressly provided otherwise in this part, each survival craft must be provided with a launching...

  10. 46 CFR 133.110 - Survival craft muster and embarkation arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft muster and embarkation arrangements. 133... VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.110 Survival craft muster and embarkation... lighting supplied from the emergency source of electrical power. (e) Each davit-launched survival craft...

  11. 46 CFR 180.205 - Survival craft-vessels operating on limited coastwise routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on limited coastwise... Craft § 180.205 Survival craft—vessels operating on limited coastwise routes. (a) Except as allowed by... survival craft required by § 180.204(d). (e) Each vessel certificated to operate on a limited coastwise...

  12. 46 CFR 199.245 - Survival craft embarkation and launching arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation and launching arrangements... Passenger Vessels § 199.245 Survival craft embarkation and launching arrangements. (a) Each davit-launched liferaft must be arranged to be rapidly boarded by its full complement of persons. (b) All survival craft...

  13. 46 CFR 199.280 - Survival craft embarkation and launching arrangements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation and launching arrangements... Cargo Vessels § 199.280 Survival craft embarkation and launching arrangements. (a) Each lifeboat must be.... (d) All survival craft required for abandonment by the total number of persons on board must be...

  14. 46 CFR 133.150 - Survival craft launching and recovery arrangements: General.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft launching and recovery arrangements...) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.150 Survival craft launching and recovery arrangements: General. (a) All survival craft required for abandonment by the total number of...

  15. 47 CFR 80.271 - Technical requirements for portable survival craft radiotelephone transceivers.

    Science.gov (United States)

    2010-10-01

    ... craft radiotelephone transceivers. 80.271 Section 80.271 Telecommunication FEDERAL COMMUNICATIONS... Authorization for Compulsory Ships § 80.271 Technical requirements for portable survival craft radiotelephone transceivers. (a) Portable survival craft radiotelephone transceivers must comply with the following: (1) The...

  16. 46 CFR 199.100 - Manning of survival craft and supervision.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Manning of survival craft and supervision. 199.100....100 Manning of survival craft and supervision. (a) There must be a sufficient number of trained... craft and launching arrangements required for abandonment by the total number of persons on board. (c...

  17. Comparison of Survival and Safety Requirements in European Union for Recreational Craft Inspections. A Spanish Case Study

    Directory of Open Access Journals (Sweden)

    J. Torralbo

    2014-03-01

    Full Text Available Statistical data shows that a large number of maritime accidents are related to recreational craft. For instance, in Spain, more than fifty percent of the emergencies are related to pleasure boats at sea. Recreational craft marketed in the EU must comply with harmonized technical safety and environmental requirements defined by Directive 94/25/EC, as amended in 2003. On 28 December 2013, the new recreational craft directive 2013/53/EU was published in the Official Journal of the European Union. EU Member States have until 18 January 2016 to amend their national legislation and transpose the new directive. The current directive 94/25/EC as amended by directive 2003/44/EC will be repealed on 18 January 2016, after the full application of the new text. Although this directive, there is not a clear coordination and equivalence among the EU countries according to the survival and safety equipment compulsory for recreational crafts. The main purpose of this paper is to analyze and compare the types of survey / inspections to be carried in pleasure craft (non-commercial use, periodicity and required safety equipment in some member states of the European Union. A case study of Spain is presented. From the results obtained, we can make clear that in the European Union there is a lack of coordination in this area and indicate the need to unify a common pattern in inspections and survival and safety requirements of recreational boats in the EU.

  18. 46 CFR 180.204 - Survival craft-vessels operating on coastwise routes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft-vessels operating on coastwise routes. 180.204 Section 180.204 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL... Craft § 180.204 Survival craft—vessels operating on coastwise routes. (a) Except as allowed by paragraph...

  19. 33 CFR 150.503 - What are the time interval requirements for maintenance on survival craft falls?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What are the time interval requirements for maintenance on survival craft falls? 150.503 Section 150.503 Navigation and Navigable Waters... maintenance on survival craft falls? (a) Each fall used in a launching device for survival craft or rescue...

  20. 46 CFR 25.25-17 - Survival craft requirements for uninspected passenger vessels of at least 100 gross tons.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Survival craft requirements for uninspected passenger... Survival craft requirements for uninspected passenger vessels of at least 100 gross tons. (a) Each uninspected passenger vessel of at least 100 gross tons must have adequate survival craft with enough capacity...

  1. CRAFT

    DEFF Research Database (Denmark)

    Gammelgaard Nielsen, Anders

    2012-01-01

    At the Aarhus School of Architecture, Associate Professor Anders Gammelgaard has erected a solid wood construction, based on traditional craftsmanship. The entire structure is made of heavy oak timber that is joined together using the old techniques of tongue and groove and dowels. The motivation......-air museums, as a performing art in front of an audience. In this article the author discusses the importance of craft and craftsmanship in contemporary architecture in relation to its users....

  2. 33 CFR 149.303 - What survival craft and rescue boats may be used on a manned deepwater port?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What survival craft and rescue boats may be used on a manned deepwater port? 149.303 Section 149.303 Navigation and Navigable Waters... craft and rescue boats may be used on a manned deepwater port? (a) Each survival craft on a manned...

  3. Standardized Laboratory Test Requirements for Hardening Equipment to Withstand Wave Impact Shock in Small High Speed Craft

    Science.gov (United States)

    2017-02-06

    axes. DRAFT NSWCCD-80-TR-2017/002 8 REFERENCES 1. Du Cane, P., The Planing Performance, Pressures , and Stresses in a High -Speed...Characterization of Individual Wave Slam Acceleration Responses for High Speed Craft, Proceedings of the 29 th American Towing Tank Conference...Methodologies for Small High -Speed Craft Structure, Equipment, Shock Isolation Seats, and Human Performance At-Sea, 10 th Symposium on High

  4. The history and development of NASA survival equipment.

    Science.gov (United States)

    Radnofsky, M. I.

    1972-01-01

    A research and development program on survival equipment was begun in early 1960 with the Mercury Program. The Mercury survival kit is discussed together with Gemini survival equipment, and Apollo I survival equipment. A study program is conducted to assess potential survival problems that may be associated with future space flights landing in polar waters. Survival kit requirements for applications on the Skylab program are also considered. Other investigations are concerned with the design of a global survival kit in connection with Space Shuttle missions.

  5. 33 CFR 149.304 - What type and how many survival craft and rescue boats must a manned deepwater port have?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What type and how many survival craft and rescue boats must a manned deepwater port have? 149.304 Section 149.304 Navigation and... What type and how many survival craft and rescue boats must a manned deepwater port have? (a) Except as...

  6. An Expert System for Supporting the Design and Selection of Mechanical Equipment for Recreational Crafts

    Directory of Open Access Journals (Sweden)

    T. Gonciarz

    2014-06-01

    Full Text Available Expert Systems can be defined as computer programs, whose main task is to simulate a human expert, usually in a narrow field of expertise. Expert Systems have experienced tremendous growth and popularity since their commercial introduction in the early 1970’s. Today, Expert Systems are used in business, science, engineering, manufacturing and other engineering applications such as planning, scheduling, diagnosing equipment failures and are used in almost every stage of the manufacturing process and also in medicine and many other fields. Expert Systems belong to the field of artificial intelligence. An intelligent computer program that uses knowledge and inference procedures to solve problems that are difficult enough to require significant human expertise for the solution. The purpose of this paper is to present an Expert System which assists with the design of yachts and supports the selection of mechanical equipment for yachts and includes knowledge in the field of yachting engineering. Using the presented Expert System reduces the time during the design and production preparation process.

  7. Using Survival Analysis to Evaluate Medical Equipment Battery Life.

    Science.gov (United States)

    Kuhajda, David

    2016-01-01

    As hospital medical device managers obtain more data, opportunities exist for using the data to improve medical device management, enhance patient safety, and evaluate costs of decisions. As a demonstration of the ability to use data analytics, this article applies survival analysis statistical techniques to assist in making decisions on medical equipment maintenance. The analysis was performed on a large amount of data related to failures of an infusion pump manufacturer's lithium battery and two aftermarket replacement lithium batteries from one hospital facility. The survival analysis resulted in statistical evidence showing that one of the third-party batteries had a lower survival curve than the infusion pump manufacturer's battery. This lower survival curve translates to a shorter expected life before replacement is needed. The data suggested that to limit unexpected failures, replacing batteries at a two-year interval, rather than the current industry recommendation of three years, may be warranted. For less than $5,400 in additional annual cost, the risk of unexpected battery failures can be reduced from an estimated 28% to an estimated 7%.

  8. 46 CFR 108.575 - Survival craft and rescue boat equipment.

    Science.gov (United States)

    2010-10-01

    ... Fishing kit 1 1 12 Flashlight 1 1 1 1 1 1 13 Hatchet 2 2 14 Heaving line 2 1 2 2 1 2 15 Instruction card 1... rigid/inflated rescue boats. 4 A hatchet counts toward this requirement in rigid rescue boats. 5 Oars...

  9. 46 CFR 133.175 - Survival craft and rescue boat equipment.

    Science.gov (United States)

    2010-10-01

    ... line 1 2 1 2 15 Instruction card 1 1 17 Knife 1,3 1 1 1 1 18 Ladder 1 1 19 Mirror, signalling 1 1 20... Not required for inflated or rigid-inflated rescue boats. 3 A hatchet counts towards this requirement...

  10. An overview of equipment survivability studies at Sandia National Laboratories (SNL)

    International Nuclear Information System (INIS)

    Bonzon, L.L.; Craft, Ch.M.; McCulloch, W.H.; Sebrell, W.A.

    1983-01-01

    The USNRC sponsors a number of programs at Sandia National Laboratories (SNL) specifically addressing safety-related equipment survivability. The major thrust of these programs has been the physical testing of equipment. Test results illustrate the importance of a dedicated equipment design effort giving particular attention to the safety implications of the equipment operation. Several equipment survivability tests here have revealed equipment design and test-related deficiencies

  11. An overview of equipment survivability studies at Sandia National Labs. (SNL): Chapter 3

    International Nuclear Information System (INIS)

    Bonzon, L.L.; Craft, C.M.; McCulloch, W.H.; Sebrell, W.A.

    1983-01-01

    The USNRC sponsors a number of programs at Sandia National Laboratories (SNL) specifically addressing safety-related equipment survivability. The major thrust of these programs has been the physical testing of equipment. Test results illustrate the importance of a dedicated equipment design effort giving particular attention to the safety implications of the equipment operation. Several equipment survivability tests here have revealed equipment design and test-related deficiencies

  12. The Use of Shock Isolation mounts in Small High-Speed Craft to Protect Equipment from Wave Slam Effects

    Science.gov (United States)

    2017-07-01

    hardware, but caution is advised because effective solutions will likely only be achieved by experienced shock isolation designers who pursue unique...provide tractable isolation solutions for craft, but caution is advised because effective solutions will likely only be achieved by experienced...very short duration of local vibration oscillations (e.g., nominal 25 to 50 msec or less) rather than rigid body shock pulse durations (e.g., 100

  13. Transformation Craft (T-Craft) Concept Study

    National Research Council Canada - National Science Library

    Marks, Cynthia; Phelps, Chance; Ryan, Justin; Sorensen, Paul

    2007-01-01

    The objective of the Transformation Craft (T-Craft) innovation team was to develop a conceptual craft that addresses the problem of transporting military vehicles at high speed from the Sea Base to troops inland...

  14. Space Craft

    Science.gov (United States)

    Demski, Jennifer

    2009-01-01

    This article discusses how craft innovative architecture is bringing form to the function of 21st-century learning. It describes the construction of New Tech High at Coppell, in Coppell, Texas, which produces an example of how workplace design principles can be coordinated with modern educational goals. The campus was built on the model of New…

  15. Contextualising Craft: Pedagogical Models for Craft Education

    Science.gov (United States)

    Pollanen, Sinikka

    2009-01-01

    Craft education in Finland is, in many aspects, in a state of change. This concerns the independent position of craft as a school subject, the content of the compulsory craft courses containing textiles and technical work, the implementation of the new concept of a holistic craft process in the National Core Curriculum and so on. This bears…

  16. Brane Craft

    Science.gov (United States)

    Janson, Siegfried

    2017-01-01

    A Brane Craft is a membrane spacecraft with solar cells, command and control electronics, communications systems, antennas, propulsion systems, attitude and proximity sensors, and shape control actuators as thin film structures manufactured on 10 micron thick plastic sheets. This revolutionary spacecraft design can have a thickness of tens of microns with a surface area of square meters to maximize area-to-mass ratios for exceptionally low-mass spacecraft. Communications satellites, solar power satellites, solar electric propulsion stages, and solar sails can benefit from Brane Craft design. It also enables new missions that require low-mass spacecraft with exceptionally high delta-V. Active removal of orbital debris from Earth orbit is the target application for this study.

  17. Evaluation of severe accident environmental conditions taking accident management strategy into account for equipment survivability assessments

    International Nuclear Information System (INIS)

    Lee, Byung Chul; Jeong, Ji Hwan; Na, Man Gyun; Kim, Soong Pyung

    2003-01-01

    This paper presents a methodology utilizing accident management strategy in order to determine accident environmental conditions in equipment survivability assessments. In case that there is well-established accident management strategy for specific nuclear power plant, an application of this tool can provide a technical rationale on equipment survivability assessment so that plant-specific and time-dependent accident environmental conditions could be practically and realistically defined in accordance with the equipment and instrumentation required for accident management strategy or action appropriately taken. For this work, three different tools are introduced; Probabilistic Safety Assessment (PSA) outcomes, major accident management strategy actions, and Accident Environmental Stages (AESs). In order to quantitatively investigate an applicability of accident management strategy to equipment survivability, the accident simulation for a most likely scenario in Korean Standard Nuclear Power Plants (KSNPs) is performed with MAAP4 code. The Accident Management Guidance (AMG) actions such as the Reactor Control System (RCS) depressurization, water injection into the RCS, the containment pressure and temperature control, and hydrogen concentration control in containment are applied. The effects of these AMG actions on the accident environmental conditions are investigated by comparing with those from previous normal accident simulation, especially focused on equipment survivability assessment. As a result, the AMG-involved case shows the higher accident consequences along the accident environmental stages

  18. A Consistent Wave Impact Load Model for Studying Structure, Equipment Ruggedness, Shock Isolation Seats, and Human Comfort in Small High Speed Craft

    Science.gov (United States)

    2016-11-01

    Carderock Division for overall management of wave slam phenomenology and craft motion mechanics investigations. During different periods of the...approach to transition this definition to an equivalent static acceleration, Riley and Coats (2012). The first assumption is that the vertical

  19. An assessment the severe accident equipment survivability for the Korean Next Generation Reactor

    International Nuclear Information System (INIS)

    Lee, B. C.; Moon, Y. T.; Park, J. W.; Kho, H. J.; Lee, S. W.

    1999-01-01

    One of the prominent design approaches to cope with the severe accident challenges in the Korean Next Generation Reactor is an assessment of equipment survivability in the severe accident environment at early design stage. In compliance with 10CFR50.34(f) and SECY-93-087, this work addresses that a reasonable level of assurance be provided to demonstrate that sufficient instrumentation and equipment will survive the consequences of a severe accident and will be available so that the operator may recover from and trend severe core damage sequences, including those scenarios which result in 100 percent oxidation of the active fuel cladding. An analytical and systematic approach was used to identify the equipment and instrumentation of safety-function and define severe accident environments including temperature, pressure, humidity, and radiation before and after the reactor vessel breach. As a result, it was concluded that with minor exceptions, existing design basis equipment qualification methods are sufficient to provide a reasonable level of assurance that this equipment will function during a severe accident. Furthermore, supplemental severe accident equipment and instrument procurement requirements were identified. (author)

  20. Computer Crafts for Kids.

    Science.gov (United States)

    Kuntz, Margy; Kuntz, Ann

    This work presents a collection of craft projects that can be created by children. Necessary for completion of each craft is an IBM-compatible computer running Windows, "Word for Windows 6.0," with a mouse, a printer, and plain white printer paper. Simple craft supplies, including glue and scissors, also are needed. In each activity the child is…

  1. In Search of Craft

    Science.gov (United States)

    Schwalbe, Michael

    2010-01-01

    In the spring of 2009, this author asked the director of North Carolina State's Crafts Center to help him find people who might be willing to participate in a project about skill. Bill Wallace, an occasional teacher at the Crafts Center, was one of the people recommended to him. Bill Wallace is a man who can look at a tree and instinctively know…

  2. Implementing digital crafting : developing

    DEFF Research Database (Denmark)

    Tamke, Martin; Ramsgaard Thomsen, Mette

    2010 in the Danish Design Centre in Copenhagen. The exhibition presents 18 designers, architects and people from the crafts that have an innovative take on the future questions of sustainability, new materials and technology. Their products challenge traditional Danish Design and are yet interconnected...... in the countries traits and the way they design. Curated by the Danish Design Centre, The Danish Architectural Centre and the Danish Crafts Organisation groups of three from the different disciplines were identified in 6 scenarios with distinct expression....

  3. The meaning of craft: craft makers' descriptions of craft as an occupation.

    Science.gov (United States)

    Pöllänen, Sinikka

    2013-05-01

    The aim of this study is to examine how craft makers describe the meaning of craft as an activity in relation to their well-being. The study is based on an analysis of the written narratives of 92 textile craft makers aged 16 to 84. Based on the results, the well-being enhancing nature of craft as a meaningful occupation for those interested in crafting is evident. The significance of craft making as an occupation is described by the following three themes: (a) "the meaning and value of crafts", (b) "the feelings experienced during craft activity", and (c) "the holisticity and intentionality of craft-making". As an activity and a metaphor, craft making helped the participants to adjust to life situations. Elements of craft that enhance well-being can be traced to both the artefacts and the sense of achievement gained in producing them. The effects of craft include personal growth, development of physical and cognitive skills, control of one's body, thoughts, and feelings, as well as cultural and social awareness. The results indicate that the participants noticed the significance of craft as an agony- and stress-reducing and mind-calming activity. Holistic craft and ordinary craft played different roles in maintaining well-being.

  4. Josiah Wedgwood, Manufacturing and Craft

    DEFF Research Database (Denmark)

    Holt, Robin; Popp, Andrew

    2016-01-01

    Craft and industrial manufacture are often seen as dichotomous, with craft being marginalized during the process of industrialization. We want to look beyond this position, searching for craft in places where it has gone unnoticed and where it might have bloomed anew in the interstices created...

  5. The craft of screenwriting

    NARCIS (Netherlands)

    Weijers, G.W.M.

    2014-01-01

    Isn't it ironic? Screenwriting is not something you learn from a book, or a talent that just falls into your lap. Nevertheless, without talent you will never become a great scriptwriter. Above all scriptwriting is a craft that you learn to master by writing, reflecting, and rewriting time after

  6. 33 CFR 150.515 - What are the requirements for weight testing of newly installed or relocated craft?

    Science.gov (United States)

    2010-07-01

    ... weight testing of newly installed or relocated craft? 150.515 Section 150.515 Navigation and Navigable... testing of newly installed or relocated craft? (a) The operator must perform installation weight testing... (a) of this section, when survival crafts are relocated to another deepwater port. ...

  7. Chemical, Biological, and Radiological (CBR) Contamination Survivability, Small Items of Equipment

    Science.gov (United States)

    2012-06-22

    contaminated with CWAs. May cause hardening or swelling of the sealant, which may weaken the seal. Rivet Stainless steel Not expected to have any effect...fallout, and nuclear survivability, which covers initial nu- clear weapon effects including Electromagnetic Pulse (EMP). Combat Developer . A...EA environmental assessment ECBC Edgewood Chemical Biological Center EMP electromagnetic pulse FD/SC Failure Definition/Scoring Criteria FM

  8. Exercise Equipment: Neutral Buoyancy

    Science.gov (United States)

    Shackelford, Linda; Valle, Paul

    2016-01-01

    Load Bearing Equipment for Neutral Buoyancy (LBE-NB) is an exercise frame that holds two exercising subjects in position as they apply counter forces to each other for lower extremity and spine loading resistance exercises. Resistance exercise prevents bone loss on ISS, but the ISS equipment is too massive for use in exploration craft. Integrating the human into the load directing, load generating, and motion control functions of the exercise equipment generates safe exercise loads with less equipment mass and volume.

  9. Craft qualities translated from traditional crafts to smart textile services

    NARCIS (Netherlands)

    Kuusk, K.; Wensveen, S.A.G.; Tomico Plasencia, O.

    2016-01-01

    In this article we suggest craft and craftsmanship as an inspiration to design more sustainable smart textile services. We look into the opportunities that interactive properties and services bring into the textile and garment life cycle. We use traditional crafts as a source of inspiration for the

  10. Crafting digital media

    CERN Document Server

    James, Daniel

    2010-01-01

    Open source software, also known as free software, now offers a creative platform with world-class programs. Just ask the people who have completed high-quality projects or developed popular web 2.0 sites using open source desktop applications. This phenomenon is no longer underground or restricted to techies - there have been more than 61 million downloads of the Audacity audio editor and more than 60 million downloads of the GIMP for Windows photographic tool from SourceForge.net alone. Crafting Digital Media is your foundation course in photographic manipulation, illustration, animation, 3D

  11. A crafting of potentials

    DEFF Research Database (Denmark)

    Kilbourn, Kyle

    In the movement from understanding the past towards creating the future design anthropology, as a discipline, will turn from one with archival qualities to one endowed with potentials for change. One challenge facing design anthropology is how to show relevance for theory generation while also in......-as is complemented by designing for as design anthropologists stage design workshops, span knowledge traditions, and make design moves. Reflecting on my own research process, I trace a few research tools that underline the craft of design anthropology....

  12. Self-crafting vegetable snacks

    NARCIS (Netherlands)

    Raghoebar, Sanne; Kleef, van Ellen; Vet, de Emely

    2017-01-01

    Purpose: The purpose of this paper is to test whether the IKEA-effect (Norton et al., 2012) – better liking for self-crafted products than for identical products crafted by others – can be exploited to increase liking and consumption of vegetable snacks in children. Design/methodology/approach: A

  13. To craft or not to craft : The relationships between regulatory focus, job crafting and work outcomes

    NARCIS (Netherlands)

    Brenninkmeijer, Veerle; Hekkert-Koning, Marleen

    2015-01-01

    Purpose – The purpose of this paper is to examine relationships between regulatory focus, job crafting, work engagement and perceived employability. Regulatory focus theory distinguishes between promotion-focused individuals, who strive for growth and development, and preventionfocussed individuals,

  14. 32 CFR 700.406 - Naval Vessel Register, classification of naval craft, and status of ships and service craft.

    Science.gov (United States)

    2010-07-01

    ... craft, and status of ships and service craft. 700.406 Section 700.406 National Defense Department of... Register, classification of naval craft, and status of ships and service craft. (a) The Chief of Naval... craft and the designation of status for each ship and service craft. (b) Commissioned vessels and craft...

  15. Fungal decay of traditional fishing craft

    Digital Repository Service at National Institute of Oceanography (India)

    Gupta, R.

    The artisanal fishermen land major portion of fish caught in India, employing traditional fishing craft and methods. These craft are built of indigenous wood and undergo rapid biodeterioration causing great economic loss. Soft-rot fungi...

  16. When Does Job Crafting Generalize To Home Crafting

    DEFF Research Database (Denmark)

    Demerouti, Evangelina; De Gieter, Sara; Haun, Verena

    Purpose: Job crafting represents attempts to expand (seeking resources or challenges) or reduce (reducing demands) the scope of the job such that it fits better to one’s preferences. The spillover hypothesis suggests that individuals generalize behaviors at work also to the non-work domain...

  17. Learning craft skills. Exploring preschoolers' craft making process

    Directory of Open Access Journals (Sweden)

    Virpi Yliverronen

    2016-06-01

    Full Text Available The aim of this study was to explore a preschooler craft-making process in which 18 preschool novices cut pieces for fabric bags and designed and printed patterns to decorate the bags. Through the task, children were familiarised with a small-scale holistic craft process. The intention was to determine how preschoolers perceived, verbalised and interpreted the craft-making process and how children used bodily expressions when explaining a learned craft skill. The present study relies on the videographic method: two preschool groups’ stamp printing activities were recorded, and each child was interviewed individually. Children’s embodied expressions were particularly in focus in video analysis. The results reveal that all the children were able to sufficiently explain the making phase, however, some children compensated for missing words using bodily and facial expressions and gestures when talking about making. The results showed that children worked logically, and the skill learning phases of perceiving, making, and interpretation were revealed from their learning.

  18. Secondary School Design: Workshop Crafts.

    Science.gov (United States)

    Department of Education and Science, London (England).

    Design features are described for school shop facilities. Some general requirements common to most workshops are discussed; and specific design information is provided for general woodwork, general metalwork, and combined wood and metalwork facilities. The grouping of the workshop crafts and their relation to other parts of the school are also…

  19. Supporting Craft Sense in Early Education

    Directory of Open Access Journals (Sweden)

    Kalle Virta

    2013-10-01

    Full Text Available The research task was to describe and construct theoretical background for Craft Sense in early education. Craft Sense represents a learner’s skill for obtaining Sloyd (Craft, Design & Technology related knowledge, skills and understanding. The development of Craft Sense is based on producing artefacts and evaluating the production process. In this research, the concept of Craft Sense is based on the integration of Sloyd and meta-cognitive regulation of learning activities. Based on theoretical information, an empirical research question was formulated: “What kind of Craft Sense do children have in early education Sloyd?” The method of study was assessing picture supported learning on a Sloyd course for young children. The data was analyzed by qualitative content analysis and Child Behaviour Rating Scale (CBRS. Findings indicate that the development of children’s Craft Sense can be supported with pictures. Furthermore, the CBRS can be used to evaluate and understand children’s Craft Sense. Keywords: Craft Sense, Sloyd, Sloyd Education, Meta-cognition

  20. Research 2009-2011 - Digital Crafting

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin; Peder Pedersen, Claus

    2012-01-01

    The publication reports on the international research network 'Digital Crafting' organised in the period 2009-2011. The research network investigated profound changes in the design and building of architecture. Developing the term Digital Crafting, the network examined how the maturing of interfa......The publication reports on the international research network 'Digital Crafting' organised in the period 2009-2011. The research network investigated profound changes in the design and building of architecture. Developing the term Digital Crafting, the network examined how the maturing...

  1. The craft of scientific writing

    CERN Document Server

    Alley, Michael

    2019-01-01

    The Craft of Scientific Writing uses scores of examples to show the differences between scientific writing that informs and persuades and scientific writing that does not. Focusing on technical papers, dissertations, and reports, this text shows engineers, scientists, and technical professionals the five keys of style that distinguish the best scientific documents: (1) having the details presented in a methodical fashion, (2) having the important details emphasized, (3) having ideas cast into clear and precise sentences, (4) having clear connections between those ideas, and (5) having illustrations that persuade.

  2. Crafting in context: Exploring when job crafting is dysfunctional for performance effectiveness.

    Science.gov (United States)

    Dierdorff, Erich C; Jensen, Jaclyn M

    2018-05-01

    Job crafting theory purports that the consequences of revising one's work role can be simultaneously beneficial and detrimental. Previous research, however, has almost exclusively emphasized the beneficial outcomes of job crafting. In the current study, we proposed dysfunctional consequences of crafting for performance-related outcomes in the form of a U-shaped relationship between job crafting and performance effectiveness (managerial ratings of job proficiency and peer ratings of citizenship behavior). We further predicted that elements of the task context (autonomy and ambiguity) and the social context (interdependence and social support) moderate these curvilinear relationships. Consistent with previous research, job crafting displayed positive and linear effects on work-related attitudes (job satisfaction and affective commitment). Consistent with our predictions, moderate levels of crafting were associated with dysfunctional performance-related outcomes and features of work context either exacerbated or dissipated these dysfunctional consequences of job crafting for individuals. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  3. Materials on Creative Arts (Arts, Crafts, Dance, Drama, Music, Bibliotherapy) for Persons with Handicapping Conditions. Revised.

    Science.gov (United States)

    American Alliance for Health, Physical Education, and Recreation, Washington, DC. Information and Research Utilization Center.

    Intended as a resource guide for persons who include such subjects as arts, crafts, dance, and music in programs for the handicapped, resources are listed for printed materials, audiovisual materials, resource persons and organizations, and material and equipment suppliers. Brief literature reviews sum up the state of the art in the specific art…

  4. Crafting forgiveness accounts after war

    DEFF Research Database (Denmark)

    Meinert, Lotte; Obika, Julaina; Whyte, Susan Reynolds

    2014-01-01

    artist, the authors collected personal voice accounts of these ‘social repair’ processes and audio edited them in order to share them with a local public. The editing process raised critical issues regarding ‘editing for effect’, which are of wider relevance for discussions of ethnographic representation...... and social processes of editing past experience. As a way of crafting and controlling material, editing is always ‘for effect’. But the authors were struck by the powerful potentials of this artistic editing and by the difficulty in foreseeing or controlling its consequences among listeners. They suggest...... that personal processes of forgiveness resemble processes of editing, in the sense that past experience is revised and given narrative form, with an effect on the present and future of social relationships. When we edit, we foreground and background segments of data and experience, and cut parts of our...

  5. DEVELOPMENT OF INTERACTIVE MULTIMEDIA COURSEWARE (E-CRAFT FOR CRAFT EDUCATION

    Directory of Open Access Journals (Sweden)

    Salyani OSMAN,

    2012-08-01

    Full Text Available The way of teaching and learning traditional crafts have always used traditional apprenticeship learning methods where the expert facilitates transfer of practice skill sets to novices. As a craft has been taught in conventional approach, the students and experts have been facing several problems especially when expert needs to teach a group of students. An appropriate mapping of craft education and Information and Communication Technologies using Multimedia technology for instance, has the potential in transforming traditional craft learning into more flexible environment. This paper reports on a research project on development of an interactive multimedia courseware package for teaching and learning traditional craft called e-CRAFT. The e-CRAFT is specially designed for songket weaving course taught to certificate and diploma students from Fakulti Seni Kraf Tenunan in their first year study at Institut Kraf Negara, Malaysia (National Craft Institute. The courseware was developed in a web-based environment and overall development process was based on the Dick and Carey's process model and conceptual Instructional Design framework. It is made up of eight learning modules: Introduction, Materials & Tools, Knowing Motifs, Learn How to Weave, Quizzes & Test, Online Discussion, Glossary and Help module. In order to test whether the courseware is suitable in terms of usability, pilot testing was done to a sample of 10 students. The results from pilot test received positive feedback which signifies the courseware is considered acceptable for effectiveness study and help for further improve of the e-CRAFT courseware.

  6. Modern electrical installation for craft students

    CERN Document Server

    Scaddan, Brian

    2013-01-01

    Modern Electrical Installation for Craft Students, Volume 2, Third Edition discusses several topics concerning electrical installations. The book is comprised of eight chapters that deal with craft theory, associated subjects, and electrical industries. Chapter 1 covers inductors and inductance, while Chapter 2 tackles capacitors and capacitance. Chapter 3 deals with inductance and capacitance in installation work. The book also discusses cells, batteries, and transformers. The electrical industries, control and earthing, and testing are also dealt with. The last chapter discusses the basic el

  7. ARKTOS amphibious oil spill response craft for mixed ice/water conditions

    Energy Technology Data Exchange (ETDEWEB)

    Seligman, Bruce H.J.W. [ARKTOS International S.A., Tavannes (Switzerland)], email: bruce.seligman@arktoscraft.com; Hall, T.A. [Hall Marine Design Ltd., Vancouver B.C. (Canada)], email: thallhmd@telus.net

    2010-07-01

    The oil spill which occurred recently in the Gulf of Mexico highlighted the lack of efficient oil spill clean-up equipment for an offshore environment. With the increase in industrial operations in the Arctic Seas it is of high importance to develop an efficient oil spill response as the absence of reliable oil spill contingency plans will not be tolerated in such environmentally sensitive areas. The aim of this paper is to present the use of the ARKTOS amphibious craft for cleaning up an oil spill in the Arctic. This craft is usually used for logistical services and evacuation purposes; its use for clean-up purposes has been under study since 2000. This study showed that the ARKTOS craft could be an efficient means for oil spill clean-up in the Arctic because of its proven ice capable amphibious platforms and its hydraulic power; however oil collection trials should be performed to validate it.

  8. ARKTOS amphibious oil spill response craft for mixed ice/water conditions

    International Nuclear Information System (INIS)

    Seligman, Bruce H.J.W.; Hall, T.A.

    2010-01-01

    The oil spill which occurred recently in the Gulf of Mexico highlighted the lack of efficient oil spill clean-up equipment for an offshore environment. With the increase in industrial operations in the Arctic Seas it is of high importance to develop an efficient oil spill response as the absence of reliable oil spill contingency plans will not be tolerated in such environmentally sensitive areas. The aim of this paper is to present the use of the ARKTOS amphibious craft for cleaning up an oil spill in the Arctic. This craft is usually used for logistical services and evacuation purposes; its use for clean-up purposes has been under study since 2000. This study showed that the ARKTOS craft could be an efficient means for oil spill clean-up in the Arctic because of its proven ice capable amphibious platforms and its hydraulic power; however oil collection trials should be performed to validate it.

  9. Employees’ Perceived Opportunities to Craft and In-Role Performance: The Mediating Role of Job Crafting and Work Engagement

    Science.gov (United States)

    van Wingerden, Jessica; Poell, Rob F.

    2017-01-01

    The present study was designed to gain knowledge of the relationship between employees’ perceived opportunities to craft, their actual job crafting behavior and, in line with JD-R theory, subsequently their work engagement and performance. Although scholars have suggested that employees’ perceived opportunities to craft their job may predict their actual job crafting behavior, which may have consequences for their well-being and performance, no study has examined the relationships between these variables. We collected data among a heterogeneous group of Dutch employees (N = 2090). Participants of the study reported their perceived opportunities to craft, job crafting behavior, work engagement and performance. Results indicated that individuals who experience a high level of opportunities to craft reported higher levels of job crafting behavior. In turn, perceived opportunities to craft and job crafting behavior related to higher levels of work engagement and subsequently performance. We discuss the implications of these findings for theory and practice. PMID:29118729

  10. Employees' Perceived Opportunities to Craft and In-Role Performance: The Mediating Role of Job Crafting and Work Engagement.

    Science.gov (United States)

    van Wingerden, Jessica; Poell, Rob F

    2017-01-01

    The present study was designed to gain knowledge of the relationship between employees' perceived opportunities to craft, their actual job crafting behavior and, in line with JD-R theory, subsequently their work engagement and performance. Although scholars have suggested that employees' perceived opportunities to craft their job may predict their actual job crafting behavior, which may have consequences for their well-being and performance, no study has examined the relationships between these variables. We collected data among a heterogeneous group of Dutch employees ( N = 2090). Participants of the study reported their perceived opportunities to craft, job crafting behavior, work engagement and performance. Results indicated that individuals who experience a high level of opportunities to craft reported higher levels of job crafting behavior. In turn, perceived opportunities to craft and job crafting behavior related to higher levels of work engagement and subsequently performance. We discuss the implications of these findings for theory and practice.

  11. Automatic Generation of the Planning Tunnel High Speed Craft Hull Form

    Institute of Scientific and Technical Information of China (English)

    Morteza Ghassabzadeh; Hassan Ghassemi

    2012-01-01

    The creation of geometric model of a ship to determine the characteristics of hydrostatic and hydrodynamic,and also for structural design and equipments arrangement are so important in the ship design process.Planning tunnel high speed craft is one of the crafts in which,achievement to their top speed is more important.These crafts with the use of tunnel have the aero-hydrodynamics properties to diminish the resistance,good sea-keeping behavior,reduce slamming and avoid porpoising.Because of the existence of the tunnel,the hull form generation of these crafts is more complex and difficult.In this paper,it has attempted to provide a method based on geometry creation guidelines and with an entry of the least control and hull form adjustment parameters,to generate automatically the hull form of planning tunnel craft.At first,the equations of mathematical model are described and subsequent,three different models generated based on present method are compared and analyzed.Obviously,the generated model has more application in the early stages of design.

  12. BioCraft: Using Gamification to Stimulate Students' Motivation and Acquisition of Scientific Terms in a Bilingual Classroom

    Science.gov (United States)

    Turner, Kent Alan

    Gamification is the act of introducing game elements in any aspect of life. In this case, it is a classroom. The operating model of BioCraft was a role-playing game that reinforced deaf students' use of new vocabulary in a gamified environment. BioCraft addressed the problem of deaf students acquiring scientific terms and using these scientific terms bilingually in academic language. BioCraft also established a student-centered learning atmosphere that promoted intersubjectivity, appropriation, and self-determination. In BioCraft, students became avatars of new organisms living on a new planet who needed to learn about living systems, adaptations, and genetics in order to survive. The results of the operating model suggested that gamification had an effect on deaf students' motivation and frequency of using new scientific terms with minimal persuasion from the teacher.

  13. Development of Interactive Multimedia Courseware (e-CRAFT) for Craft Education

    Science.gov (United States)

    Osman, Salyani; Sahari, Noraidah; Zin, Nor Azan Mat

    2012-01-01

    The way of teaching and learning traditional crafts have always used traditional apprenticeship learning methods where the expert facilitates transfer of practice skill sets to novices. As a craft has been taught in conventional approach, the students and experts have been facing several problems especially when expert needs to teach a group of…

  14. The craft of intensive care medicine.

    Science.gov (United States)

    Carmel, Simon

    2013-06-01

    The practice of medicine is often represented as a dualism: is medicine a 'science' or an 'art'? This dualism has been long-lasting, with evident appeal for the medical profession. It also appears to have been rhetorically powerful, for example in enabling clinicians to resist the encroachment of 'scientific' evidence-based medicine into core areas of medical work such as individual clinical judgement. In this article I want to make the case for a more valid conceptualisation of medical practice: that it is a 'craft' activity. The case I make is founded on a theoretical synthesis of the concept of craft, combined with an analysis of ethnographic observations of routine medical practice in intensive care. For this context the craft aspects of medical work can be seen in how biomedical and other types of knowledge are used in practice, the embodied skills and practical judgement of practitioners and the technological and material environment. These aspects are brought together in two conceptual dimensions for 'craft': first, the application of knowledge; second, interaction with the material world. Some practical and political implications of a 'craft' metaphor for medical practice are noted. © 2013 The Author. Sociology of Health & Illness © 2013 Foundation for the Sociology of Health & Illness/John Wiley & Sons Ltd.

  15. Extrusion cooking : craft or science?

    NARCIS (Netherlands)

    Zuilichem, van D.J.

    1992-01-01

    It is not longer ago than the seventies when a food extruder was described as a piece of equipment, consisting out of a barrel and one or two screws. The function of the extruder was believed to receive an agricultural product, to transport it from a feed section to a screw

  16. From Gender-segregated Subjects to Multi-material Craft: Craft Student Teachers’Views on the Future of the Craft Subject

    Directory of Open Access Journals (Sweden)

    Jaana Lepistö

    2015-12-01

    Full Text Available This paper describes the views of student teachers of craft about the future of craft as a school subject. The study was conducted at the University of Turku, Department of Teacher Education, in Rauma in 2014. The literature review revealed that the subject of craft in Finnish basic education is understood as a dialog between the maker and the materials. However, teaching and learning craft in schools and in teacher education has a strong gender-based tradition. The aim of this study is to investigate student teachers’ understanding of craft as a school subject in the future and their solutions to teaching craft in basic education. The data were collected from essays (N = 20 written by student teachers of craft. The essays were analyzed qualitatively using content analysis. The results showed that the student teachers of craft viewed holistic craft, reflective action readiness, entrepreneurial behaviour, multiple skills, the use of versatile materials, and craft as sources of pleasure and the main solutions for the future of craft as a subject.

  17. Inshore craft traditional working vessels of the british isles

    CERN Document Server

    Greenhill, Basil

    2013-01-01

    This comprehensive reference work describes and illustrates some 200 types of inshore craft that once fished and traded, under oar and sail, around the coasts of the British Isles. The types are arranged by coastal area and each is described in terms of its shape and design, fitness for location and purpose, build, evolution and geographical distribution. Details of dimensions, rig, building materials, seamanship and the survival of examples are given where known, while hundreds of line drawings and photographs show the vessels in their original forms.A team of twelve experts describe all these boat types and, in addition, there are introductions to the main geographic areas outlining the physical environments, fisheries and other uses of the sea that have influenced boat design; maps of all the areas show ports and physical features.At the beginning of the last century sail and oar dominated fisheries and local trade: one hundred years later those craft have all but vanished. This book brings alive for marit...

  18. Automatic Construction by Contour Crafting Technology

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Khorramshahi

    2017-07-01

    Full Text Available Contour Crafting is a novel technology in construction industry based on 3D printing that uses robotics to construct free form building structures by repeatedly laying down layers of material such as concrete. It is actually an approach to scale up automatic fabrication from building small industrial parts to constructing buildings. However, there are little information about contour crafting (CC in current use; present paper aims to describe the operational steps of creating a whole building by the machine reviewing relevant literature. Furthermore, it will represent the advantages of CC usage compared to traditional construction methods, as well as its applicability in construction industry.

  19. Crafting by concepts fiber arts and mathematics

    CERN Document Server

    Belcastro, Sarah-Marie

    2016-01-01

    From the editors of the popular Making Mathematics with Needlework, this book presents projects that highlight the relationship between types of needlework and mathematics. Chapters start with accessible overviews presenting the interplay between mathematical concepts and craft expressions. Following sections explain the mathematics in more detail, and provide suggestions for classroom activities. Each chapter ends with specific crafting instructions. Types of needlework included are knitting, crochet, needlepoint, cross-stitch, quilting, temari balls, beading, tatting, and string art. Instructions are written as ordinary patterns, so the formatting and language will be familiar to crafters.

  20. Friedel-Crafts Acylation with Amides

    Science.gov (United States)

    Raja, Erum K.; DeSchepper, Daniel J.; Nilsson Lill, Sten O.; Klumpp, Douglas A.

    2012-01-01

    Friedel-Crafts acylation has been known since the 1870s and it is an important organic synthetic reaction leading to aromatic ketone products. Friedel-Crafts acylation is usually done with carboxylic acid chlorides or anhydrides while amides are generally not useful substrates in these reactions. Despite being the least reactive carboxylic acid derivative, we have found a series of amides capable of providing aromatic ketones in good yields (55–96%, 17 examples). We propose a mechanism involving diminished C-N resonance through superelectrophilic activation and subsequent cleavage to acyl cations. PMID:22690740

  1. 47 CFR 97.215 - Telecommand of model craft.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Telecommand of model craft. 97.215 Section 97... AMATEUR RADIO SERVICE Special Operations § 97.215 Telecommand of model craft. An amateur station transmitting signals to control a model craft may be operated as follows: (a) The station identification...

  2. 75 FR 50773 - Invocation of Sunken Military Craft Act

    Science.gov (United States)

    2010-08-17

    ... Military Craft Act AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The Coast Guard is announcing that a C-130 aircraft which crashed off the coast of California is a sunken military craft. It is therefore... is announcing that the wreckage of CG 1705 is a sunken military craft, and is therefore protected...

  3. 32 CFR 700.872 - Ships and craft in drydock.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Ships and craft in drydock. 700.872 Section 700... Special Circumstances/ships in Naval Stations and Shipyards § 700.872 Ships and craft in drydock. (a) The... ship or craft, not in commission, is in a naval drydock, the provisions of this article shall apply...

  4. 33 CFR 401.58 - Pleasure craft scheduling.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Pleasure craft scheduling. 401.58... OF TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.58 Pleasure craft scheduling. (a) The transit of pleasure craft shall be scheduled by the traffic controller or the officer in...

  5. 29 CFR 1202.8 - Hearings on craft or class.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Hearings on craft or class. 1202.8 Section 1202.8 Labor... craft or class. In the event the contesting parties or organizations are unable to agree on the..., specifying the craft or class of employees eligible to participate in the designation of representatives. ...

  6. The Art and Craft of Science

    Science.gov (United States)

    Root-Bernstein, Robert; Root-Bernstein, Michele

    2013-01-01

    Walter Alvarez, a doctor and physiologist of some renown, decided to send his scientifically talented son, Luis, to an arts and crafts school where Luis took industrial drawing and woodworking instead of calculus. Luis Alvarez won the Nobel Prize in physics in 1968. Einstein was certainly not a standout in his mathematics and physics classes. Yet…

  7. Craft Knowledge: Of Disciplinarity in Writing Studies

    Science.gov (United States)

    Johnson, Robert R.

    2010-01-01

    This article argues that craft knowledge can provide a disciplinary rationale for writing studies. It draws from the ancient concepts of teche, phronesis, and the four causes of making and makes the case for a definition of disciplinary knowledge fitting for writing studies. The article concludes with a conceptual framework that can serve as a…

  8. Rationalizing Cooperation: Moroccan Craft, Politics, and Education

    Science.gov (United States)

    Nicholas, Claire

    2018-01-01

    State attempts to rationalize Moroccan craft education reflect the ambivalent status of traditional knowledge in a modern economy. Female artisans, recently organized as a cooperative, navigate this ambivalence in a weaving "theory" class and in their "occupation" of the cooperative structure itself. During performances of…

  9. The nature of creativity in craft

    DEFF Research Database (Denmark)

    Glaveanu, Vlad Petre

    2012-01-01

    The present article explores the nature of creativity in craft and does so with the help of a case study of traditional Easter egg decoration. It starts by positioning the domain of folk art in relation to fine art and within a larger category of everyday life forms of creative expression...

  10. Antecedents of daily team job crafting

    NARCIS (Netherlands)

    Mäkikangas, Anne; Bakker, Arnold B.; Schaufeli, Wilmar B.

    2017-01-01

    This study investigated potential antecedents of team job crafting defined as the extent to which team members engage together in increasing (social and structural) job resources and challenges, and decreasing hindering job demands. Mindful of the teamwork literature, we hypothesized that individual

  11. Meaningful work and work engagement : The mediating role of perceived opportunity to craft and job crafting behavior

    NARCIS (Netherlands)

    Van Wingerden, Jessica; van der Stoep, Joost; Poell, R.F.

    2018-01-01

    This study examines the impact of meaningful work on employees’ level of work engagement as mediated by perceived opportunities to craft and job crafting. Based on the literature on meaningful work and job crafting, we hypothesize that meaningful work has a positive relationship with an employee’s

  12. From Gender-segregated Subjects to Multi-material Craft: Craft Student Teachers’Views on the Future of the Craft Subject

    OpenAIRE

    Jaana Lepistö; Eila Lindfors

    2015-01-01

    This paper describes the views of student teachers of craft about the future of craft as a school subject. The study was conducted at the University of Turku, Department of Teacher Education, in Rauma in 2014. The literature review revealed that the subject of craft in Finnish basic education is understood as a dialog between the maker and the materials. However, teaching and learning craft in schools and in teacher education has a strong gender-based tradition. The aim of this study is to in...

  13. An improved approach to exchange non-rectangular departments in CRAFT algorithm

    OpenAIRE

    Esmaeili Aliabadi, Danial; Pourghannad, Behrooz

    2012-01-01

    In this Paper, an algorithm which improves CRAFT algorithm’s efficacy is developed. CRAFT is an algorithm widely used to solve facility layout problems. Our proposed method, named Plasma, can be used to improve CRAFT results. In this note, Plasma algorithm is tested in several sample problems. The comparison between Plasma and classic CRAFT and also Micro-CRAFT indicates that Plasma is successful in cost reduction in comparison with CRAFT and Micro-CRAFT.

  14. Sustainable Innovation of Glass Design and Craft

    DEFF Research Database (Denmark)

    Sparre-Petersen, Maria

    2014-01-01

    Barely any research has been made into the implementation of sustainable principles in glass design and craft. A common tendency among students and practitioners is to consider it problematic if not impossible to develop a “truly sustainable practice”. Generally glass crafts people and glass...... designers aim to explore new aesthetic possibilities for the material and see sustainability as a hindrance for aesthetic freedom. On the contrary the field of design has strong and growing emphasis on sustainable development. Fry (2009) argues that what he defines as sustain-ability is not an end goal...... but an ongoing process of re-directing the way we design our world and thereby our future. This approach along with further research into sustainable development within the field of design and combined with material specific methodologies may reveal new possibilities for sustainable as well as aesthetic...

  15. Concept annotation in the CRAFT corpus.

    Science.gov (United States)

    Bada, Michael; Eckert, Miriam; Evans, Donald; Garcia, Kristin; Shipley, Krista; Sitnikov, Dmitry; Baumgartner, William A; Cohen, K Bretonnel; Verspoor, Karin; Blake, Judith A; Hunter, Lawrence E

    2012-07-09

    Manually annotated corpora are critical for the training and evaluation of automated methods to identify concepts in biomedical text. This paper presents the concept annotations of the Colorado Richly Annotated Full-Text (CRAFT) Corpus, a collection of 97 full-length, open-access biomedical journal articles that have been annotated both semantically and syntactically to serve as a research resource for the biomedical natural-language-processing (NLP) community. CRAFT identifies all mentions of nearly all concepts from nine prominent biomedical ontologies and terminologies: the Cell Type Ontology, the Chemical Entities of Biological Interest ontology, the NCBI Taxonomy, the Protein Ontology, the Sequence Ontology, the entries of the Entrez Gene database, and the three subontologies of the Gene Ontology. The first public release includes the annotations for 67 of the 97 articles, reserving two sets of 15 articles for future text-mining competitions (after which these too will be released). Concept annotations were created based on a single set of guidelines, which has enabled us to achieve consistently high interannotator agreement. As the initial 67-article release contains more than 560,000 tokens (and the full set more than 790,000 tokens), our corpus is among the largest gold-standard annotated biomedical corpora. Unlike most others, the journal articles that comprise the corpus are drawn from diverse biomedical disciplines and are marked up in their entirety. Additionally, with a concept-annotation count of nearly 100,000 in the 67-article subset (and more than 140,000 in the full collection), the scale of conceptual markup is also among the largest of comparable corpora. The concept annotations of the CRAFT Corpus have the potential to significantly advance biomedical text mining by providing a high-quality gold standard for NLP systems. The corpus, annotation guidelines, and other associated resources are freely available at http://bionlp-corpora.sourceforge.net/CRAFT/index.shtml.

  16. Crafted - meisterdatud / Mihkel Tüür

    Index Scriptorium Estoniae

    Tüür, Mihkel, 1976-

    2012-01-01

    12. Alvar Aalto sümpoosion Jyväskyläs 10.-12. augustil 2012 teemal "Crafted". Kuraator Pekka Heikkinen. Pikemalt Mohsen Mostafavi ettekandest "Arhitektuur on materiaalne" ja Jürg Conzetti ettekandest "Strukturaalse tava jätkamine". Autori sõnul jäi kõlama mõte, et meisterlikult ehitatud maja saab olla ainus arhitektuuri tegelik mõõde

  17. The meanings of craft to an occupational therapist.

    Science.gov (United States)

    Harris, Emma

    2008-06-01

    Craft was the first therapeutic occupation of occupational therapy. Since the early days of the profession, the value of craft in practice is a topic that has been discussed with fluctuating interest. Recent discussions by occupational therapists have reinforced that although craft is relevant to occupational therapy, there are uncertainties about its place in contemporary practice. Presently, scholars have identified that occupation is both the center of human experience and the core of our profession. Therefore, this study aimed to begin to clarify the meaning of craft to practice today by gaining a deep understanding of the meanings that one occupational therapist attributes to craft. Using narrative inquiry, data were gathered through a conversation held between the research participant and myself. A reflexive journal was also kept to support this data gathering process. Narrative analysis enabled intimate engagement with the data and the emergence of themes and sub-themes. The findings, in the form of an interpretive story, suggest first, that craft-making has therapeutic value; second, that reasoning about the therapeutic use of craft is similar to reasoning about other therapeutic activities; and third, that personal experience with craft-making can influence the selection of craft as therapeutic media. From this study, further research into the impact personal and professional experiences can have on choice of therapeutic media and an analysis of the sociopolitical context of the meanings that occupational therapists attribute to craft-making is suggested.

  18. NATURAL BASES AND ARTISTIC MEANS OF MODERN ARTS AND CRAFTS OF DAGESTAN

    Directory of Open Access Journals (Sweden)

    G. G. Gazimagomedov

    2015-01-01

    Full Text Available The aim is to carry out a generalized analysis of the history of formation of a new artistic language in contemporary arts and crafts of Dagestan. An innovative search for applied artist has gained further development in a series of works of the leading masters of folk arts and crafts of Dagestan. Discussion. For millennia, arts and crafts of Dagestan have been organically linked with the life of people and their everyday way of life and daily activities, with their worldview and understanding of beauty. In the middle of the 1st millennium BC in the mountainous Dagestan, art of bronze casting has reached a high degree of perfection, most vividly represented by statues of different wild and domestic animals. Images of animals are interpreted generically, without study of small details, but with the characteristic features of the exterior. Paired images of birds are often found in the arts and crafts of the medieval Dagestan. This heraldic composition, two-part or in conjunction with the sacred tree - a three-part, presented in metal-plastic and carved stone and wood, was one of the most popular and enduring decorative items that was common during the Middle Ages and has survived to the present day. This also has been further developed and improved and inherited by craftsmen of Dagestan.Conclusion. When creating works of arts and crafts craftsmen use diverse traditional arts and engineering techniques, the ancient but substantially revised and reinterpreted iconic scenes and ornamental motifs. In art, folk craftsmen emphasize the unity of man and nature. Most ornamental motifs common in Dagestan, go back to the very specific nature prototypes. Compositional structure, as the artistic analysis shows, is often borrowed from nature. This feeling becomes a condition for cultural and biological development, acting as a factor of co-evolution of man and nature.

  19. Electrical Safety Program: Nonelectrical Crafts at LANL, Live #12175

    Energy Technology Data Exchange (ETDEWEB)

    Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-22

    Los Alamos National Laboratory (LANL) and the federal government require those working with or near electrical equipment to be trained on electrical hazards and how to avoid them. Although you might not be trained to work on electrical systems, your understanding of electricity, how it can hurt you, and what precautions to take when working near electricity could save you or others from injury or death. This course, Electrical Safety Program: Nonelectrical Crafts at LANL (12175), provides knowledge of basic electrical concepts, such as current, voltage, and resistance, and their relationship to each other. You will learn how to apply these concepts to safe work practices while learning about the dangers of electricity—and associated hazards—that you may encounter on the job. The course also discusses what you can do to prevent electrical accidents and what you should do in the event of an electrical emergency. The LANL Electrical Safety Program is defined by LANL Procedure (P) 101-13. An electrical safety officer (ESO) is well versed in this document and should be consulted regarding electrical questions. Appointed by the responsible line manager (RLM), ESOs can tell you if a piece of equipment or an operation is safe or how to make it safe.

  20. Leading to Crafting: The Relation Between Leadership Perception and Nurses' Job Crafting.

    Science.gov (United States)

    Esteves, Tiago; Pereira Lopes, Miguel

    2017-06-01

    Whenever individuals adapt their jobs to make them closer of their personal preferences, they are performing job crafting. This study aims to investigate if the way nurses perceive their leaders' behaviors is related with job crafting development. To do so, a quantitative analysis was conducted among a group of 325 Portuguese nurses. Results indicate that the perception of an empowering leader was found to be strongly related with the increase of challenges in the work environment, and with the development of stronger relations with direct managers and co-workers, which are two job crafting dimensions. The perception of a directive leader was found to be positively related with the avoidance of performing hindering tasks. Strengthening relations with direct managers and co-workers was found to be particularly related to leadership perception. Theoretical and practical implications are discussed.

  1. Job Crafting, Employee Well-being, and Quality of Care.

    Science.gov (United States)

    Yepes-Baldó, Montserrat; Romeo, Marina; Westerberg, Kristina; Nordin, Maria

    2018-01-01

    The main objective is to study the effects of job crafting activities of elder care and nursing home employees on their perceived well-being and quality of care in two European countries, Spain and Sweden. The Job Crafting, the General Health, and the Quality of Care questionnaires were administered to 530 employees. Correlations and hierarchical regression analyses were performed. Results confirm the effects of job crafting on quality of care ( r = .291, p employees' well-being ( r = .201, p well-being in Spain and Sweden and with quality of care in Spain. On the contrary, in Sweden, the relationship between job crafting and well-being was not linear. Job crafting contributes significantly to employees' and residents' well-being. Management should promote job crafting to co-create meaningful and productive work. Cultural effects are proposed to explain the differences found.

  2. Modelling job crafting behaviours: Implications for work engagement

    OpenAIRE

    Bakker, Arnold B.; Rodríguez-Muñoz, Alfredo; Sanz Vergel, Ana Isabel

    2016-01-01

    In this study among 206 employees (103 dyads), we followed the job demands–resources approach of job crafting to investigate whether proactively changing one’s work environment influences employee’s (actor’s) own and colleague s (partner’s) work engagement. Using social cognitive theory, we hypothesized that employees would imitate each other’s job crafting behaviours, and therefore influence each other’s work engagement. Results showed that the crafting of social and structural job resources...

  3. 33 CFR 84.24 - High-speed craft.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false High-speed craft. 84.24 Section... RULES ANNEX I: POSITIONING AND TECHNICAL DETAILS OF LIGHTS AND SHAPES § 84.24 High-speed craft. (a) The masthead light of high-speed craft with a length to breadth ratio of less than 3.0 may be placed at a...

  4. Diverse orientations in craft education: Student teachers’ conceptions and perceptions

    Directory of Open Access Journals (Sweden)

    Tarja Kröger

    2016-03-01

    Full Text Available Craft education in Finland has been in a state of change. The concept of a holistic craft process was implemented in the National Core Curriculum in 2004 and the new Curriculum from 2014 strengthened it. Craft and holistic craft is not one unity but includes several orientations. This study aims to research student teachers’ conceptions and perceptions about diverse orientations and the necessity of craft education before they begin their studies in craft pedagogy. Given that the beliefs that student teachers bring to professional learning play a pivotal role in influencing what they can learn from teacher education, they are a subject worthy of investigation. The data consists of on‐line questionnaire answers by student teachers (N=113 at the University of Finland in teacher education in 2014. The on-line questionnaire was answered at the beginning of a basic course in textile craft education at an early stage of their teacher studies. Findings suggest that student teachers conceive of craft education primarily as model-oriented and skill-oriented rather than design-oriented and expression-oriented. Student teachers think that craft education is needed at school, but explanations are not very diverse. The findings of this study can be useful in the process of developing teacher education programmes.

  5. Which employees craft their jobs and how? Basic dimensions of personality and employees' job crafting behaviour

    NARCIS (Netherlands)

    Bipp, T.; Demerouti, E.

    2015-01-01

    The aim of the current research was to examine to what degree basic personality dimensions serve as determinants of job crafting behaviour and to investigate how this behaviour can be influenced via behavioural intentions. In Study 1, we investigated the relationship of approach and avoidance

  6. Sustainable Innovation of Glass Design and Craft

    DEFF Research Database (Denmark)

    Sparre-Petersen, Maria

    2014-01-01

    , reduction of production and transportation of new glass is desirable (Environmental Protection Agency, 2012), and can be realized by recycling glass, that has already been manufactured, used and collected for recycling, but has ended up in landfills due to the market mechanisms that allow manufacturing...... and deposition of glass is reduced Today glass production predominantly consists of window glass, glass wool for insulation and containers such as bottles and jelly jars. Glass craft and design hold only a fraction of the market. Still there is reason to believe that generation and implementation of new...

  7. Crafts and Craft Education as Expressions of Cultural Heritage: Individual Experiences and Collective Values among an International Group of Women University Students

    Science.gov (United States)

    Kokko, Sirpa; Dillon, Patrick

    2011-01-01

    This paper explores relationships between crafts, craft education and cultural heritage as reflected in the individual experiences and collective values of fifteen female university students of different nationalities. The students (all trainee teachers) were following a course in crafts and craft education as part of an International Study…

  8. Sarawak Bamboo Craft: Symbolism and Phenomenon

    Directory of Open Access Journals (Sweden)

    Arshad Mohd Zaihidee

    2014-04-01

    Full Text Available The relationship between human beings and their environment has stirred reactions between nature and the development of mind and actions that can be discussed using interdisciplinary approaches such as psychology, sociology, anthropology and history, in understanding human thinking and behavior. A psychological approach is intended to evaluate the individual choices and needs in society. A sociological approach details the various patterns in the social organization. An anthropological approach is tied with culture and belief to fulfil human needs which are based on their habitat, while a historical approach looks at the development which is related to the past. Dimensions of experiences, order and logic, selective elaboration and expressions are used to analyze the bamboo craft of Iban, Melanau and Bidayuh societies in Sarawak long-houses. The existence of constitutive, moral, expressive and cognitive symbols has been interpreted based on a theoretical framework that has been developed by Langer Art Theory, Parsons Social Theory and Kaplan Culture Theory. The values and meaning formed are interpreted to understand matters related to the lives of villagers and the finding suggests that bamboo craft expresses the multi-ethnic mind and character in the socio-culture of long- houses in Sarawak.

  9. Searching the Soul: Veterans and Their Arts and Crafts

    Science.gov (United States)

    Hasio, Cindy

    2011-01-01

    For military veterans suffering from the long-term trauma of warfare, arts and crafts become much more than the fabrication of relics; they can literally save the spirit. Dialogue and interaction between the veterans, volunteers, and staff are crucial to the success of veterans' arts and crafts program. The purpose of this research was threefold.…

  10. Formation control of marine surface craft: a Lagrangian approach

    DEFF Research Database (Denmark)

    Ihle, Ivar-Andre F.; Jouffroy, Jerome; Fossen, Thor I.

    2006-01-01

    This paper presents a method for formation control of marine surface craft inspired by Lagrangian mechanics. The desired formation configuration and response of the marine surface craft are given as a set of constraints in analytical mechanics. Thus, constraints forces arise and feedback from...

  11. Creating Chicago History: Making Outreach Craft Activities Meaningful

    Science.gov (United States)

    Karp, Madeline

    2012-01-01

    When it comes to having a traveling outreach activity for a museum, a craft can seem like the perfect solution. It can seemingly be all things at once--educational, quick and fun. But, if poorly constructed, crafts can also have serious fallbacks. Using the Chicago History Museum and the Millennium Park Family Fun Festival as a case study, this…

  12. Craft Lessons: Teaching Writing K-8. Second Edition

    Science.gov (United States)

    Fletcher, Ralph; Portalupi, JoAnn

    2007-01-01

    Since its publication in 1998 Craft Lessons has become a mainstay of writing teachers, both new and experienced. Practical lessons--each printed on one page--and the instructional language geared to three grade-level groupings: K-2, 3-4, and 5-8 are contained in this book. In the decade since Craft Lessons' publication the world has changed in…

  13. Learning Practices of Femininity through Gendered Craft Education in Finland

    Science.gov (United States)

    Kokko, Sirpa

    2009-01-01

    This paper discusses the processes and practices that link crafts and gender in the upbringing and education of girls. The paper is based on a study conducted among female primary school trainee teachers in Finland. The data are comprised of their experiences with crafts as schoolgirls. The methods of the study were memory work and writing of…

  14. Students' Attitudes towards Craft and Technology in Iceland and Finland

    Science.gov (United States)

    Thorsteinsson, Gísli; Ólafsson, Brynjar; Autio, Ossi

    2012-01-01

    Craft education in both Finland and Iceland originated over 140 years ago and was influenced by the Scandinavian Sloyd pedagogy. Since then, the subject has moved away from craft and towards technology, with the aim being to increase students' technological abilities. In the beginning, the subject largely focused on the students copying artefacts,…

  15. Craft-Art as a Basis for Human Activity

    Science.gov (United States)

    Karppinen, Seija

    2008-01-01

    This article based on my doctoral thesis examines the Basic Arts Education system in Finland, focusing on Basic Crafts Education and its description through action concepts. The main task of the study was to create a concept model. In the first part of the study a concept map was created from the practice of Basic Crafts Education. The aim of the…

  16. The comparative risk assessment framework and tools (CRAFT)

    Science.gov (United States)

    Southern Research Station. USDA Forest Service

    2010-01-01

    To help address these challenges, the USDA Forest Service’s Eastern Forest Environmental Threat Assessment Center (EFETAC) and the University of North Carolina Asheville’s National Environmental Modeling and Analysis Center (NEMAC) designed a planning framework, called the Comparative Risk Assessment Framework and Tools (CRAFT). CRAFT is...

  17. Craft Training in Russia: Theory and Practice of Development

    Science.gov (United States)

    Romantsev, Gennadij M.; Efanov, Andrei V.; Moiseev, Andrei V.; Bychkova, Ekaterina Yu.; Karpova, Natalia P.; Tidemann, Bruno

    2016-01-01

    The relevance of the research topic is substantiated by the social commitment to the establishment of a system of craft training focused on training personnel for craft enterprises. The purpose of the article is to provide theoretical and methodological substantiation of the necessity to provide organizational and pedagogical foundations for the…

  18. Empowering leadership and job crafting: The role of employee optimism.

    Science.gov (United States)

    Thun, Sylvi; Bakker, Arnold B

    2018-06-08

    The objective of this study was to test the relationship between empowering leadership and job crafting and to examine the moderating role of optimism as a personal resource. We hypothesized that the association between empowering leadership and job crafting would be stronger for employees with high (vs. low) levels of optimism. A total of 331 Norwegian workers from a variety of occupations participated in our study. Results of structural equation modelling analysis generally supported our hypotheses. Empowering leadership was positively related to 3 of the 4 job crafting strategies investigated (increasing structural job resources, increasing social job resources, and increasing challenging job demands; but not reducing hindrance job demands). Moreover, as hypothesized, optimism strengthened the empowering leadership-job crafting relationship for increasing structural resources and increasing challenging demands. The results suggest that empowering leadership is an important antecedent of job crafting strategies, except for reducing hindrance demands. The implications of these findings are discussed. Copyright © 2018 John Wiley & Sons, Ltd.

  19. Employees’ perceived opportunities to craft and in-role performance : The mediating role of job crafting and work engagement

    NARCIS (Netherlands)

    Van Wingerden, Jessica; Poell, R.F.

    2017-01-01

    The present study was designed to gain knowledge of the relationship between employees' perceived opportunities to craft, their actual job crafting behavior and, in line with JD-R theory, subsequently their work engagement and performance. Although scholars have suggested that employees' perceived

  20. Job crafting: Towards a new model of individual job redesign

    Directory of Open Access Journals (Sweden)

    Maria Tims

    2010-12-01

    Research purpose: The purpose of the study was to fit job crafting in job design theory. Motivation for the study: The study was an attempt to shed more light on the types of proactive behaviours of individual employees at work. Moreover, we explored the concept of job crafting and its antecedents and consequences. Research design, approach and method: A literature study was conducted in which the focus was first on proactive behaviour of the employee and then on job crafting. Main findings: Job crafting can be seen as a specific form of proactive behaviour in which the employee initiates changes in the level of job demands and job resources. Job crafting may be facilitated by job and individual characteristics and may enable employees to fit their jobs to their personal knowledge, skills and abilities on the one hand and to their preferences and needs on the other hand. Practical/managerial implications: Job crafting may be a good way for employees to improve their work motivation and other positive work outcomes. Employees could be encouraged to exert more influence on their job characteristics. Contribution/value-add: This article describes a relatively new perspective on active job redesign by the individual, called job crafting, which has important implications for job design theories.

  1. Guides crafting meaning and identity in a flexible working life

    DEFF Research Database (Denmark)

    Meged, Jane Widtfeldt

    2017-01-01

    and adding a critical perspective, we understand the guides’ agency, and how they craft scope, tasks and relations in order to sustain a positive self-image and a meaningful working life. Comparing certified guides’ job-crafting practices, we learn that guides are alike across the three countries......Certified guides are exemplary, well-educated, self-employed, casual labourers in a liberal and competitive job market. Applying grounded theory, this exploratory study builds on in-depth qualitative interviews with Danish, Italian and French certified guides. Informed by the theory of job crafting...

  2. Equipment considerations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Trace or ultratrace analyses require that the HPLC equipment used, including the detector, be optimal for such determinations. HPLC detectors are discussed at length in Chapter 4; discussion here is limited to the rest of the equipment. In general, commercial equipment is adequate for trace analysis; however, as the authors approach ultratrace analysis, it becomes very important to examine the equipment thoroughly and optimize it, where possible. For this reason they will review the equipment commonly used in HPLC and discuss the optimization steps. Detectability in HPLC is influenced by two factors (1): (a) baseline noise or other interferences that lead to errors in assigning the baseline absorbance; (b) peak width. 87 refs

  3. Major factors influencing craft productivity in nuclear power plant construction

    International Nuclear Information System (INIS)

    Borcherding, J.D.; Sebastian, S.J.

    1980-01-01

    This paper reports on a research study whose objective was to determine the most influential factors adversely affecting craft productivity in nuclear power plant construction from the perspective of the tradesmen employed at the sites. Data were collected through the use of a questionnaire survey and group interview sessions, predominantly with workmen, at six nuclear power plant construction projects. Craftsmen were chosen as the major data base because of their awareness of how their time would actually be spent on the project. Topics considered include the factors influencing craft productivity, material availability, redoing work, crew interfacing, overcrowded work areas, instruction time, inspection delays, craft turnover, craft absenteeism, foreman changes, foreman incompetence, engineering design lead time, comprehensive scheduling of the design function, the responsibility of the utility, value engineering, plant standardization, the effective utilization of the planning and scheduling system, and the labor-management committee

  4. Construction and Validation of the Perceived Opportunity to Craft Scale.

    Science.gov (United States)

    van Wingerden, Jessica; Niks, Irene M W

    2017-01-01

    We developed and validated a scale to measure employees' perceived opportunity to craft (POC) in two separate studies conducted in the Netherlands (total N = 2329). POC is defined as employees' perception of their opportunity to craft their job. In Study 1, the perceived opportunity to craft scale (POCS) was developed and tested for its factor structure and reliability in an explorative way. Study 2 consisted of confirmatory analyses of the factor structure and reliability of the scale as well as examination of the discriminant and criterion-related validity of the POCS. The results indicated that the scale consists of one dimension and could be reliably measured with five items. Evidence was found for the discriminant validity of the POCS. The scale also showed criterion-related validity when correlated with job crafting (+), job resources (autonomy +; opportunities for professional development +), work engagement (+), and the inactive construct cynicism (-). We discuss the implications of these findings for theory and practice.

  5. Integrated Design of Semi-Displacement Patrol Crafts

    National Research Council Canada - National Science Library

    Gillespy, Andrew J

    2008-01-01

    ... of any one change on the entire system. The initial design of smaller patrol craft is especially difficult due to the lack of design tools able to deal with ships of small size operating in the semi-planing region...

  6. The Computer and the Writer's Craft: Implications for Teachers.

    Science.gov (United States)

    Brockmann, R. John; McCauley, Rebecca J.

    1984-01-01

    Examines how computers as a medium for communication affect the craft of writing, and subsequently affect teaching approaches. Discusses the need for teaching online document design and problem-solving processes as they relate to the communication process. (HTH)

  7. Constructing knowledge through perceptual processes in making craft-art

    Directory of Open Access Journals (Sweden)

    Milla Ojala

    2013-10-01

    Full Text Available The focus of the study is on the knowledge that is constructed through perceptual processes during craft making in the context of the Finnish Basic Education in the Arts (BEA system. Craft studies in the BEA are defined as craft-art. The research method used is the grounded theory. The data consists of seven interviews and participant observations. Participants in the study are adolescents who study craft-art in the BEA system in Visual Art School, Aimo in Hämeenlinna. The aim of the article is to present, define and reflect on the concepts, properties and dimensions concerning perceptual processes that are discovered in this stage of the study following grounded theory procedures. The perceptual processes are an essential means of constructing knowledge in craft-art. Consequently, one aim of the study is to discuss how these processes are connected to various types of knowledge. The perceptual processes are described by seven concepts: imitative, anticipative, evaluative, experimental, emotional, temporal and bodily perceptions. They indicate on a conceptual level the characteristic of knowledge constructed through perceptual processes in craft-art. Further, theconcepts have several properties that can vary dimensionally between two qualities. The properties are activity, function and position. The dimensions of the properties vary from active to passive, formal to informal and internal to external. In conclusion, the concepts can describe a large range of incidents in different situations. They also seem to describe well the practice of  craft-art and there are several connections with pre-existing concepts of knowledge.Keywords: Craft, Knowledge, Perceptual process, Basic Education in the Arts, Grounded Theory 

  8. Craft's brand equity in CZ, focusing on canoeing

    OpenAIRE

    Šťastný, Šimon

    2013-01-01

    Title: Craft's brand equity in CZ, focusing on flat water canoeing. Objectives: The objective of this dissertation is to find out what is the Craft's brand equity and to suggest how to improve it on the Czech market. That would be based on marketing research and supplementary interview. I will be using marketing research and supplementary interview. Methods: In this dissertation the method of electronic questioning was used. The questionnaires were sent by email address after first contact on...

  9. Minimum Plate Thickness in High-Speed Craft

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Zhang, Shengming

    1998-01-01

    The minimum plate thickness requirements specified by the classification societies for high-speed craft are supposed to ensure adequate resistance to impact loads such as collision with floating objects and objects falling on the deck. The paper presents analytical methods of describing such impact...... phenomena and proposes performance requirements instead of thickness requirements for hull panels in high-speed craft made of different building materials....

  10. Anatomical models and wax Venuses: art masterpieces or scientific craft works?

    Science.gov (United States)

    Ballestriero, R

    2010-02-01

    The art of wax modelling has an ancient origin but rose to prominence in 14th century Italy with the cult of votive artefacts. With the advent of Neoclassicism this art, now deemed repulsive, continued to survive in a scientific environment, where it flourished in the study of normal and pathological anatomy, obstetrics, zoology and botany. The achievement of having originated the creation of anatomical models in coloured wax must be ascribed to a joint effort undertaken by the Sicilian wax modeller Gaetano Giulio Zumbo and the French surgeon Guillaume Desnoues in the late 17th century. Interest in anatomical wax models spread throughout Europe during the 18th century, first in Bologna with Ercole Lelli, Giovanni Manzolini and Anna Morandi, and then in Florence with Felice Fontana and Clemente Susini. In England, the art of anatomical ceroplastics was brought to London from Florence by the sculptor Joseph Towne. Throughout the centuries many anatomical artists preferred this material due to the remarkable mimetic likeness obtained, far surpassing any other material. Independent of the material used, whether wood, wax or clay, anatomical models were always considered merely craft works confined to hospitals or faculties of medicine and have survived to this day only because of their scientific interest. Italian and English waxes are stylistically different but the remarkable results obtained by Susini and Towne, and the fact that some contemporary artists are again representing anatomical wax bodies in their works, makes the border that formerly separated art and craft indistinguishable.

  11. Modeling, simulation & optimization of the landing craft air cushion fleet readiness.

    Energy Technology Data Exchange (ETDEWEB)

    Engi, Dennis

    2006-10-01

    The Landing Craft Air Cushion is a high-speed, over-the-beach, fully amphibious landing craft capable of carrying a 60-75 ton payload. The LCAC fleet can serve to transport weapons systems, equipment, cargo and personnel from ship to shore and across the beach. This transport system is an integral part of our military arsenal and, as such, its readiness is an important consideration for our national security. Further, the best way to expend financial resources that have been allocated to maintain this fleet is a critical Issue. There is a clear coupling between the measure of Fleet Readiness as defined by the customer for this project and the information that is provided by Sandia's ProOpta methodology. Further, there is a richness in the data that provides even more value to the analyst. This report provides an analytic framework for understanding the connection between Fleet Readiness and the output provided by Sandia's ProOpta software. Further, this report highlights valuable information that can also be made available using the ProOpta output and concepts from basic probability theory. Finally, enabling assumptions along with areas that warrant consideration for further study are identified.

  12. Detail in architecture: Between arts & crafts

    Science.gov (United States)

    Dulencin, Juraj

    2016-06-01

    Architectural detail represents an important part of architecture. Not only can it be used as an identifier of a specific building but at the same time enhances the experience of the realized project. Within it lie the signs of a great architect and clues to understanding his or her way of thinking. It is therefore the central topic of a seminar offered to architecture students at the Brno University of Technology. During the course of the semester-long class the students acquaint themselves with atypical architectural details of domestic and international architects by learning to read them, understand them and subsequently draw them by creating architectural blueprints. In other words, by general analysis of a detail the students learn theoretical thinking of its architect who, depending on the nature of the design, had to incorporate a variety of techniques and crafts. Students apply this analytical part to their own architectural detail design. The methodology of the seminar consists of experiential learning by project management and is complemented by a series of lectures discussing a diversity of details as well as materials and technologies required to implement it. The architectural detail design is also part of students' bachelors thesis, therefore, the realistic nature of their blueprints can be verified in the production process of its physical counterpart. Based on their own documentation the students choose the most suitable manufacturing process whether it is supplied by a specific technology or a craftsman. Students actively participate in the production and correct their design proposals in real scale with the actual material. A student, as a future architect, stands somewhere between a client and an artisan, materializes his or her idea and adjusts the manufacturing process so that the final detail fulfills aesthetic consistency and is in harmony with its initial concept. One of the very important aspects of the design is its economic cost, an

  13. Experimental Investigation of a Wing-in-Ground Effect Craft

    Directory of Open Access Journals (Sweden)

    M. Mobassher Tofa

    2014-01-01

    Full Text Available The aerodynamic characteristics of the wing-in-ground effect (WIG craft model that has a noble configuration of a compound wing was experimentally investigated and Universiti Teknologi Malaysia (UTM wind tunnel with and without endplates. Lift and drag forces, pitching moment coefficients, and the centre of pressure were measured with respect to the ground clearance and the wing angle of attack. The ground effect and the existence of the endplates increase the wing lift-to-drag ratio at low ground clearance. The results of this research work show new proposed design of the WIG craft with compound wing and endplates, which can clearly increase the aerodynamic efficiency without compromising the longitudinal stability. The use of WIG craft is representing an ambitious technology that will help in reducing time, effort, and money of the conventional marine transportation in the future.

  14. Experimental investigation of a wing-in-ground effect craft.

    Science.gov (United States)

    Tofa, M Mobassher; Maimun, Adi; Ahmed, Yasser M; Jamei, Saeed; Priyanto, Agoes; Rahimuddin

    2014-01-01

    The aerodynamic characteristics of the wing-in-ground effect (WIG) craft model that has a noble configuration of a compound wing was experimentally investigated and Universiti Teknologi Malaysia (UTM) wind tunnel with and without endplates. Lift and drag forces, pitching moment coefficients, and the centre of pressure were measured with respect to the ground clearance and the wing angle of attack. The ground effect and the existence of the endplates increase the wing lift-to-drag ratio at low ground clearance. The results of this research work show new proposed design of the WIG craft with compound wing and endplates, which can clearly increase the aerodynamic efficiency without compromising the longitudinal stability. The use of WIG craft is representing an ambitious technology that will help in reducing time, effort, and money of the conventional marine transportation in the future.

  15. Defense Utility of Commercial Vessels and Craft.

    Science.gov (United States)

    1980-01-01

    interpreted to determine whether the vessel is suitable for the salvage * job required. Sometimes, a photograph or general arrangement plan is most...30. UNDERWAY REPLENISHMENT (yes/no) Yes 31 . OTHER POSSIBLE FEATURES Diesel powered mue pur’ps 2000-4000 HP, Draw works 2000-3000 HTP C. BARGE...of the Army, Marine Crewman’s Handbook, Technical Manual TM 55-501 (Washington: Sept. 1972). 23. Department of the Army, Marine Equipment

  16. Ship to Shore Connector Amphibious Craft (SSC)

    Science.gov (United States)

    2015-12-01

    transport weapon systems, equipment, cargo, and personnel of the assault elements of the Marine Expeditionary Brigades and the Army Brigade Combat Teams...Aug 2017 Aug 2017 Feb 2018 Aug 2017 OPEVAL/ IOT &E Apr 2018 Apr 2018 Oct 2018 Apr 2018 FRP Decision Sep 2018 Sep 2018 Mar 2019 Sep 2018 IOC Aug 2020 Aug...Detail Design and Construction IOT &E - Initial Operational Test and Evaluation OA - Operational Assessment OE - Option Exercise OPEVAL - Operational

  17. Classification of Intact Stability Standards for Dynamically Supported Craft.

    Science.gov (United States)

    1979-10-01

    introduced (by the U.S. Navy) in the late 1950’s. Both military and commercial applications of this type have since proved very successful . From the... successful and safe planing craft have been built for military, commercial and private use. The stability of planing craft, however, is an extremely...forlces. Broaching- [ n I, 111, I ikeA LL) tOCCUr in suvvre following seas, when the Cr aft runs do L tht ! act of ort wav docd slope- ts bovw Ma’ thes

  18. Formation control of surface marine craft using Lagrange multipliers

    DEFF Research Database (Denmark)

    Ihle, Ivar-Andre F.; Jouffroy, Jerome; Fossen, Thor I.

    We propose a method for constructing control laws for formation control of marine craft using classical tools from analytical mechanics. The control law is based on applying inter-vessel constraint functions which again impose forces on the individual vessels that maintain the given constraints...... on the total system. In this way, a formation can be assembled and stay together when exposed to external forces. A brief comparison with other control designs for a group of marine craft is done. Further, control laws for formation assembling (with dynamic positioning), and formation keeping during...

  19. Transformational leadership, adaptability, and job crafting : the moderating role of organizational identification.

    NARCIS (Netherlands)

    Wang, H.; Demerouti, E.; Le Blanc, P.M.

    In this study, we aim to explore the link between transformational leadership and job crafting. We predict that transformational leadership will stimulate employee job crafting (seeking resources, seeking challenges, and reducing demands) by increasing their adaptability; but that transformational

  20. Marian Roberts, Developing the Craft of Mediation: Reflections on Theory and Practice

    Directory of Open Access Journals (Sweden)

    Ghislaine M. Lanteigne

    2008-10-01

    Full Text Available In Developing the Craft of Mediation, Marian Roberts proposes that mediation is akin to a craft with its focus on learning from experience and from others working in the field to develop and master knowledge and skills.

  1. Job crafting, work engagement, and psychological distress among Japanese employees: a cross-sectional study

    OpenAIRE

    Sakuraya, Asuka; Shimazu, Akihito; Eguchi, Hisashi; Kamiyama, Kimika; Hara, Yujiro; Namba, Katsuyuki; Kawakami, Norito

    2017-01-01

    Background Job crafting, an employee-initiated job design/redesign, has become important for employees? well-being. However, most studies on the relationship between job crafting and employees? well-being have been conducted in western countries; thus, it is unclear whether job crafting can be effectively applied to Asian cultures, such as Japan, which emphasizes group harmony. The aim of this study was to examine the cross-sectional associations of self-reported job crafting with work engage...

  2. Causal factors in accidents of high-speed craft and conventional ocean-going vessels

    International Nuclear Information System (INIS)

    Antao, Pedro; Guedes Soares, C.

    2008-01-01

    An analysis of 40 ocean-going commercial vessel accidents is compared with the study of a similar number of high-speed crafts (HSCs) accidents, using in both cases a methodology that highlights the sequence of events leading to the accident and identifies the associated latent or causal factors. The main objective of this study was to identify and understand the difference in the pattern of causal factors associated with HSC accidents, as compared with the more traditional ocean-going ships. From the analysis one can see that the HSC accidents are mainly related to bridge personnel and operations, where the human element is the key factor identified as being responsible for the majority of the accidents. When compared with ocean-going commercial vessels, it is clear that navigational equipment and procedures have a larger preponderance in terms of the occurrence of accidents of HSC and particular attention should be given to these issues

  3. Malleable Thought: The Role of Craft Thinking in Practice-Led Graphic Design

    Science.gov (United States)

    Ings, Welby

    2015-01-01

    This article considers the potential of craft processes as creative engagements in graphic design research. It initially discusses the uneasy history of craft within the discipline, then draws upon case studies undertaken by three established designers who, in their postgraduate theses, engaged with craft as a process of thinking. In doing so, the…

  4. 26 CFR 1.861-16 - Income from certain craft first leased after December 28, 1980.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Income from certain craft first leased after... the United States § 1.861-16 Income from certain craft first leased after December 28, 1980. (a) General rule. If a taxpayer— (1) Owns a qualified craft (as defined in paragraph (b) of this section). (2...

  5. 76 FR 38153 - California State Nonroad Engine Pollution Control Standards; Commercial Harbor Craft Regulations...

    Science.gov (United States)

    2011-06-29

    ... Standards; Commercial Harbor Craft Regulations; Opportunity for Public Hearing and Comment AGENCY... engines on commercial harbor craft. CARB has requested that EPA issue a new authorization under [email protected] . SUPPLEMENTARY INFORMATION: I. California's Commercial Harbor Craft Regulations In a...

  6. Valuing Craftsmanship: In particular the crafting of Chinese porcelain and Dutch Delft Blue

    NARCIS (Netherlands)

    L. Jiang (Lili)

    2018-01-01

    markdownabstract“How important are crafts for a society?” When a conventional economist gets the question, the answer is most likely about the prices of craft products, the income of craftspeople, and the contribution that the crafts sector makes to GDP. This thesis gives another answer. Applying

  7. D Digital Simulation of Minnan Temple Architecture CAISSON'S Craft Techniques

    Science.gov (United States)

    Lin, Y. C.; Wu, T. C.; Hsu, M. F.

    2013-07-01

    Caisson is one of the important representations of the Minnan (southern Fujian) temple architecture craft techniques and decorative aesthetics. The special component design and group building method present the architectural thinking and personal characteristics of great carpenters of Minnan temple architecture. In late Qing Dynasty, the appearance and style of caissons of famous temples in Taiwan apparently presented the building techniques of the great carpenters. However, as the years went by, the caisson design and craft techniques were not fully inherited, which has been a great loss of cultural assets. Accordingly, with the caisson of Fulong temple, a work by the well-known great carpenter in Tainan as an example, this study obtained the thinking principles of the original design and the design method at initial period of construction through interview records and the step of redrawing the "Tng-Ko" (traditional design, stakeout and construction tool). We obtained the 3D point cloud model of the caisson of Fulong temple using 3D laser scanning technology, and established the 3D digital model of each component of the caisson. Based on the caisson component procedure obtained from interview records, this study conducted the digital simulation of the caisson component to completely recode and present the caisson design, construction and completion procedure. This model of preserving the craft techniques for Minnan temple caisson by using digital technology makes specific contribution to the heritage of the craft techniques while providing an important reference for the digital preservation of human cultural assets.

  8. Productive and counterproductive job crafting: A daily diary study.

    Science.gov (United States)

    Demerouti, Evangelia; Bakker, Arnold B; Halbesleben, Jonathon R B

    2015-10-01

    The present study aims to uncover the way daily job crafting influences daily job performance (i.e., task performance, altruism, and counterproductive work behavior). Job crafting was conceptualized as "seeking resources," "seeking challenges," and "reducing demands" and viewed as strategies individuals use to optimize their job characteristics. We hypothesized that daily job crafting relates to daily job demands and resources (work pressure and autonomy), which consequently relate to daily work engagement and exhaustion and ultimately to job performance. A sample of 95 employees filled in a quantitative diary for 5 consecutive working days (n occasions = 475). We predicted and found that daily seeking resources was positively associated with daily task performance because daily autonomy and work engagement increased. In contrast, daily reducing demands was detrimental for daily task performance and altruism, because employees lower their daily workload and consequently their engagement and exhaustion, respectively. Only daily seeking challenges was positively (rather than negatively) associated with daily counterproductive behavior. We conclude that employee job crafting can have both beneficial and detrimental effects on job performance. (c) 2015 APA, all rights reserved).

  9. Ghanaian Craft Exporters in the Global Market: Binding and Missing ...

    African Journals Online (AJOL)

    Agribotix GCS 068

    The paper explored the benefits that accrue to Ghanaian craft exporters from subcontracting ties .... viewed as important channels for providing effective and cheaper bases for economic development ... member negatively affect the reputation and cohesion of the group and therefore ...... Unpublished PhD Thesis, University.

  10. Effectiveness of a Volunteer-Led Crafts Group Intervention amongst ...

    African Journals Online (AJOL)

    The purpose of this study was to determine the effectiveness of a volunteer led crafts group intervention (VLCG) as an adjunct to antidepressant medication on mild to moderately depressed women. A quasi-experimental, non-equivalent, control group study was conducted in an urban, psychiatric clinic. Depression was ...

  11. Artisans, Architects, and Apprentices: Valuing the Craft of Teacher Education

    Science.gov (United States)

    Boyd Potter, Rachel

    2016-01-01

    In this article, Boyd Potter describes teacher education faculty as both artisans and architects. As artisans, it is not only their products that enrich us; it is the art of the craft itself that shapes their work. An artisan is valued for the creative endeavor, and not solely the masterpiece. Preparing a quality teacher is not easy work, while…

  12. Bottom Raking Damage to High-Speed Craft

    DEFF Research Database (Denmark)

    Simonsen, Bo Cerup

    1998-01-01

    This paper presents a comparative study of the raking damage to high speed craft (HSC) and conventional ships. The analysis is based on a detailed theoretical model for the raking resistance of an assembled ship bottom structure and on the idea that the impact conditions for various ship types have...

  13. Classroom Teachers' Craft Knowledge of Their Inclusive Practice

    Science.gov (United States)

    Black-Hawkins, Kristine; Florian, Lani

    2012-01-01

    Whilst recent decades have seen significant progress in research on inclusive education, many teachers still feel that the research literature does not fully address their professional concerns about how to enact a policy of inclusion in their classrooms. To help to bridge this gap, we drew on the concept of craft knowledge to undertake a detailed…

  14. Arts, Crafts and Indigenous Industries in Nigeria | Yakubu | Journal ...

    African Journals Online (AJOL)

    The paper is illustrative of the cultural wealth of Nigeria in terms of arts and crafts. It provides a descriptive picture of the various characteristics of the genres in the past and present and in traditional as well as modern Nigerian communities. It functions within religious, intellectual, and socio-economic contexts. Hence ...

  15. Ghanaian Craft Exporters in the Global Market: Binding and Missing ...

    African Journals Online (AJOL)

    The strong positions of buyers and export agents in the craft value chain enable them to apply sanctions to extract compliance from the exporters whereas the weak position of the export vendors implies the lack of sanctioning authority over the rogue artisan subcontractors. The government's promotion programmes could ...

  16. Conceptualizing responsible innovation in craft villages in Vietnam

    NARCIS (Netherlands)

    Voeten, J.; de Haan, J.A.C.; Roome, N.; de Groot, G.A.; Nguyen Thi, Huong; van den Hoven, J.; Doorn, N.; Swierstra, T.; Koops, B.-J.; Romijn, H.

    2014-01-01

    Previous research by the authors has explored small-scale innovations in poor craft producers’ clusters in villages in the Red River Delta in northern Vietnam. Although these innovations resulted in value creation and increased incomes, they also often gave rise to negative environmental or social

  17. Transferring PSM craft skills in a 2 hour session

    NARCIS (Netherlands)

    Zijderveld, E.J.A. van; Morill, N.; Shaw, D.; Belton, V.; Harvey, P.; Rouwette, E.

    2007-01-01

    Many of those involved in the Problem Structuring Methods (PSM) community have commented on the struggle that novices face in building the craft skills associated with conducting a PSM intervention. As part of this year's Operational Research Society Conference, we have three 2-hour practical

  18. Beyond Talent: John Irving and the Passionate Craft of Creativity.

    Science.gov (United States)

    Amabile, Teresa M.

    2001-01-01

    Uses the thoughts and work of novelist John Irving to illustrate the prominence of non-talent components in the componential model of creativity, explaining that raw talent, clever imagination, and a creative personality are insufficient to ensure creative success and that hard work and love of a craft (intrinsic motivation) are at least as…

  19. Reading the Writer's Craft: The Hemingway Short Stories

    Science.gov (United States)

    Garrigues, Lisa

    2004-01-01

    The high school students who spent five weeks studying the style and craft of Ernest Hemingway experienced the power and plus points of apprenticeships. Several assignments that helped the high school juniors to analyze Hemingway's work on short stories and learn from this master craftsman are presented.

  20. Robust formation control of marine surface craft using Lagrange multipliers

    DEFF Research Database (Denmark)

    Ihle, Ivar-Andre F.; Jouffroy, Jerome; Fossen, Thor I.

    2006-01-01

    This paper presents a formation modelling scheme based on a set of inter-body constraint functions and Lagrangian multipliers. Formation control for a °eet of marine craft is achieved by stabilizing the auxiliary constraints such that the desired formation con¯guration appears. In the proposed fr...

  1. Crafting Sustainability: Handcraft in Contemporary Art and Cultural Sustainability in the Finnish Lapland

    Directory of Open Access Journals (Sweden)

    Elina Härkönen

    2018-06-01

    Full Text Available Crafting sustainability is discussed here with respect to the dimensions of handcraft traditions in contemporary art for promoting cultural sustainability in the Scandinavian North. Aspects of decolonization, cultural revitalisation, and intergenerational dialogue form an integral part of the negotiations around the need for cultural survival and renewal for a more sustainable future. These dimensions should also be considered in the development of the current education of art teachers. Learning traditional skills and applying them in contemporary art constitute an influential method when striving for cultural sustainability. This study examines three handcraft-based contemporary art cases through art-based action research conducted in the Finnish and the Swedish Lapland. The results show that handcraft-based contemporary art practices with place-specific intergenerational and intercultural approaches create an open space for dialogue where the values and the perceptions on cultural heritage can be negotiated.

  2. The Validity of the School Assessment in the Craft Subject

    Directory of Open Access Journals (Sweden)

    Antti Hilmola

    2016-06-01

    Full Text Available In this research project, the validity of the school assessment is examined in the craft subject in Finland’s basic education. The criteria for the school assessment are based on the Finnish Na-tional Core Curriculum (FNCC in which the idea of the Entire Craft (EC is highlighted. How-ever, the discussion as to whether or not the school practice is based on the idea of EC, or whether the teachers are still focused on the technical details of products in reflecting on the pupils’ tool-handling skills, is still an ongoing debate. Learner-centred learning is implicated in EC since the pupils are expected to set goals for the implementation of their own ideating, plan-ning and constructing. And, finally, in such a process, the self-reflection of the implemented out-comes against the goals will take place.  Altogether 73 craft teachers from 59 upper level schools participated in this research project. The pupils’ (N = 982 success was assessed during an EC period using the indicator validated by the previous nation-wide evaluation by the Finn-ish National Board of Education (FNBE. Since the valid school assessment was expected to reflect the success in the Entire Craft Assessment Period (ECAP, the outcomes were assessed against the criteria of the FNCC and compared to the pupils’ school scores. The data was ana-lysed using the Linear Regression Analysis (Enter Method. The central observation was that the pupils’ success in the criteria of the EC do not reflect the 7th grade school scores, in all re-spects. Moreover, the pupils’ success does not reflect the 6th grade school scores. The instruc-tions and supplementary education of the FNCC criteria are needed for craft teachers, especial-ly for class teachers at the lower level. In Finland, also the craft subject is taught by the class teachers at the lower level while, at the upper level, the subject teachers take their place. Ac-cording to the new FNCC, the number of class lessons will be

  3. Job crafting in schools for special education: A qualitative analysis [Job crafting in het speciaal onderwijs: Een kwalitatieve analyse

    NARCIS (Netherlands)

    Wingerden, J. van; Derks, D.; Bakker, A.B.; Dorenbosch, L.

    2013-01-01

    In this article we discuss the design and qualitative (process) evaluation of a job crafting intervention among employees at three Dutch schools for special education. In a period of 1.5 months, fifty employees participated in a group-based training intervention that addressed individual's job

  4. [Hydrotherapy equipment].

    Science.gov (United States)

    Tsibikov, V B; Ragozin, S I; Mikheeva, L V

    1985-01-01

    A flow-chart is developed demonstrating the relation between medical and prophylactic institutions within the organizational structure of the rehabilitation system and main types of rehabilitation procedures. In order to ascertain the priority in equipping rehabilitation services with adequate hardware the special priority criterion is introduced. The highest priority is assigned to balneotherapeutic and fangotherapeutic services. Based on the operation-by-operation analysis of clinical processes related to service and performance of balneologic procedures the preliminary set of clinical devices designed for baths, basins and showers in hospitals and rehabilitation departments is defined in a generalized form.

  5. O activismo estético feminista de Nikki Craft Nikki Craft's aesthetic feminist activism

    Directory of Open Access Journals (Sweden)

    Rui Pedro Fonseca

    2010-12-01

    Full Text Available Uma das condições para que na sociedade sejam alicerçados valores de género misóginos consiste na existência de uma estrutura de produção cultural heterossexual compulsiva, dominante e universalista que estabeleça princípios de representação dos sexos claramente diferenciados, que tendam a favorecer mais o homem em detrimento da mulher. Partimos de um princípio de que a produção da cultura origina processos de reprodução, o que significa, em termos práticos, que a representação de signos, códigos, valores e comportamentos associados aos sexos é potencialmente materializada nas sociedades, por homens e por mulheres. Essa tem sido uma batalha levada a cabo por muitas mulheres a partir da segunda vaga do movimento feminista, nomeadamente pela ala mais radical, que tem procurado reivindicar novos paradigmas no que diz respeito às convenções culturais de género. O que propomos neste estudo é analisar algumas das campanhas levadas a cabo por Nikki Craft, uma feminista radical norte-americana que viria a organizar e/ou a protagonizar nos anos 1970 e 1980 vários protestos em espaços públicos de algumas cidades dos Estados Unidos. Neste estudo procuramos clarificar as motivações e as estratégias levadas a cabo por essa feminista, cujos activismos incidiram contra algumas das estruturas culturais (campo da arte, instituições da beleza e indústria pornográfica legitimadoras de representações desencadeadoras de prejuízos para a mulherOne of the conditions for misogynic genders to be settled in society consists on the existence of a compulsive dominant and universal heterosexual cultural production, which establishes clearly differentiated representation principles of both sexes. These representation principles tend to favour more the man, disregarding the woman. We consider that culture production gives origin to reproduction processes, which means that, in practical terms, the representation of signs, codes, values

  6. Evidence of Validity of the Job Crafting Behaviors Scale

    Directory of Open Access Journals (Sweden)

    Renata Silva de Carvalho Chinelato

    2015-12-01

    Full Text Available AbstractJob crafting behavior refers to the changes made by workers in their job context for adjusting their activities to their preferences. We sought to adapt and collect validity evidences of the Job Crafting Behaviors Scale for the Brazilian context, in a sample of 491 workers, with a mean age of 26.7 years. Factor analysis revealed that the final instrument consisted of three dimensions (increasing structural job resources, increasing social job resources, increasing challenging job demands, which showed good internal consistency indexes. These dimensions showed low or moderate correlations with work engagement, positive psychological capital, positive job affect, and in-role performance. The scale showed evidence of validity, the use of which is recommended for future research on the changes that people make in their jobs.

  7. Hypnobirth within the NHS: time to ditch the parent craft?

    Science.gov (United States)

    Gavin-Jones, Teri

    2016-05-01

    Antenatal education within the National Health Service (NHS) is a service in decline within some hospital trusts. Classes on offer are being moved into online formats or discontinued completely. Whilst research into antenatal education remains limited, what is known is that good birth preparation is of value. "Participative preparation for childbirth can enhance women's overall satisfaction with the childbirth experience" (Schrader McMillan et al 2009: 49). There are pockets of excellent antenatal education within the NHS, but no system for regulating the quality and content. Traditional 'parent craft' classes can be oversubscribed, turning what should be a participative group into an audience. Offering good quality antenatal education has the potential to increase normality, improve the birth outcome and the experience of both woman and her birth partner. Is it time to ditch the parent craft and implement dynamic woman-focused education?

  8. Cryogenic equipment

    International Nuclear Information System (INIS)

    Leger, L.; Javellaud, J.; Caro, C.; Gilguy, R.; Testard, O.

    1966-06-01

    The cryostats presented here were built from standard parts; this makes it possible to construct a great variety of apparatus at minimum cost. The liquid nitrogen and helium reservoirs were designed so as to reduce losses to a minimum, and so as to make the cryostats as autonomous as possible. The experimental enclosure which is generally placed in the lower part of the apparatus requires a separate study in every case. Furthermore, complete assemblies such as transfer rods, isolated traps and high vacuum valves, were designed with a similar regard for the economic aspects and for the need for standardization. This equipment thus satisfies a great variety of experimental needs; it is readily adaptable and the consumptions of helium and liquid nitrogen are very low. (authors) [fr

  9. Craft and Conservation: Features of Danish Journalism Culture

    DEFF Research Database (Denmark)

    Schultz, Ida

    This paper presents the field theory of Pierre Bourdieu, discusses how the framework can be used for studying journalism culture, and illustrates the use in a case study of journalism education in Denmark. The first section makes a first attempt to define Journalism Culture as a logic of practice...... of field, capital and habitus to identity craft as a strong capital in the field and conservation as a dominant logic....

  10. Application of CRAFT in two-dimensional NMR data processing.

    Science.gov (United States)

    Krishnamurthy, Krish; Sefler, Andrea M; Russell, David J

    2017-03-01

    Two-dimensional (2D) data are typically truncated in both dimensions, but invariably and severely so in the indirect dimension. These truncated FIDs and/or interferograms are extensively zero filled, and Fourier transformation of such zero-filled data is always preceded by a rapidly decaying apodization function. Hence, the frequency line width in the spectrum (at least parallel to the evolution dimension) is almost always dominated by the apodization function. Such apodization-driven line broadening in the indirect (t 1 ) dimension leads to the lack of clear resolution of cross peaks in the 2D spectrum. Time-domain analysis (i.e. extraction of frequency, amplitudes, line width, and phase parameters directly from the FID, in this case via Bayesian modeling into a tabular format) of NMR data is another approach for spectral resonance characterization and quantification. The recently published complete reduction to amplitude frequency table (CRAFT) technique converts the raw FID data (i.e. time-domain data) into a table of frequencies, amplitudes, decay rate constants, and phases. CRAFT analyses of time-domain data require minimal or no apodization prior to extraction of the four parameters. We used the CRAFT processing approach for the decimation of the interferograms and compared the results from a variety of 2D spectra against conventional processing with and without linear prediction. The results show that use of the CRAFT technique to decimate the t 1 interferograms yields much narrower spectral line width of the resonances, circumventing the loss of resolution due to apodization. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  11. [Simplified models of analysis of the sources of risk and biomechanical overload in craft industries: application experience in wooden barrel making].

    Science.gov (United States)

    Pressiani, Sofia

    2011-01-01

    Barrel making is an ancient art evidence of which is found in paintings from the Egyptian era in the Mediterranean civilizations, and since it was an ideal shipping container its use spread quickly and on a wide scale. The study was conducted in a small high quality craft industry, applying the method which is the topic of this volume, i.e., risk pre-mapping by which it is possible to identify the presence or absence of occupational risk and any need for further evaluation. The study showed the presence of health risks for workers, which were mainly physical (noise, vibrations produced by machinery and equipment typical of the craft, and risks from hardwood dust, in addition to the traditional risks of biomechanical overload of the upper limbs. Today, the barrel maker is a professional craft of excellence and quality, dedicated to the creation of large barrels and vats, using woods of different essences depending on the organoleptic qualities that it is desired should influence the final flavour of the wine: the manual art and the equipment are ancient but the technology used to achieve the final product is necessarily advanced. So far issues of safety and health risks related to this type of industry have received little attention and the risks poorly evaluated, with the possibility that occupational diseases may occur among the operators, particularly of the skeletal-muscular type.

  12. Tracking Porters: Learning the Craft of Techno-Anthropology.

    Science.gov (United States)

    Bruun, Maja Hojer; Krause-Jensen, Jakob; Saltofte, Margit

    2015-01-01

    Anthropology attempts to gain insight into people's experiential life-worlds through long-term fieldwork. The quality of anthropological knowledge production, however, does not depend solely on the duration of the stay in the field, but also on a particular way of seeing social situations. The anthropological perspective is grounded in socio-cultural theory and forged by a distinct relativist or contextualist epistemological stance. The point is to understand events, concepts and phenomena from the insiders' point of view and to show how this view relates to the particular social and cultural context. In this chapter, we argue that although anthropology has its specific methodology - including a myriad of ethnographic data-gathering tools, techniques, analytical approaches and theories - it must first and foremost be understood as a craft. Anthropology as craft requires a specific 'anthropological sensibility' that differs from the standardized procedures of normal science. To establish our points we use an example of problem-based project work conducted by a group of Techno-Anthropology students at Aalborg University, we focus on key aspects of this craft and how the students began to learn it: For two weeks the students followed the work of a group of porters. Drawing on anthropological concepts and research strategies the students gained crucial insights about the potential effects of using tracking technologies in the hospital.

  13. Maritime Interdiction Operations Small Craft Detection

    International Nuclear Information System (INIS)

    Dougan, A.D.; Trombino, D.; Dunlop, W.; Bordetsky, A.

    2010-01-01

    The Naval Postgraduate School has been conducting Tactical Network Topology (TNT) Maritime Interdiction Operations (MIO) experiments with Lawrence Livermore National Laboratory (LLNL) since early in 2005. In this work, we are investigating cutting edge technology to evaluate use of networks, advanced sensors and collaborative technology for globally-supported maritime interdiction operations. Some examples of our research include communications in harsh environments, between moving ships at sea; small boat drive-by radiation detection; network-centric collaboration with global partners; situational awareness; prototype sensors and biometric instruments. Since 2006, we have studied the concept of using a small vessel with fixed radiation sensors to do initial searches for illicit radioactive materials. In our work, we continue to evaluate concepts of operation for small boat monitoring. For example, in San Francisco Bay we established a simulated choke point using two RHIBs. Each RHIB had a large sodium iodide radiation sensor on board, mounted on the side nearest to the passing potential target boats. Once detections were made, notification over the network prompted a chase RHIB also equipped with a radiation sensor to further investigate the potential target. We have also used an unmanned surface vessel (USV) carrying a radiation sensor to perform the initial discovery. The USV was controlled remotely and to drive by boats in different configurations. The potential target vessels were arranged in a line, as a choke point and randomly spaced in the water. Search plans were problematic when weather, waves and drift complicated the ability to stay in one place. A further challenge is to both detect and identify the radioactive materials during the drive-by. Our radiation detection system, ARAM, Adaptable Radiation Area Monitor, is able to detect, alarm and quickly identify plausible radionuclides in real time. We have performed a number of experiments to better

  14. Medical Issues: Equipment

    Science.gov (United States)

    ... Information Packets Equipment Pool Living With SMA Medical Issues Palliative Breathing Orthopedics Nutrition Equipment Daily Life At ... curesma.org > support & care > living with sma > medical issues > equipment Equipment Individuals with SMA often require a ...

  15. Environmental Support to Amphibious Craft, Patrol Boats, and Coastal Ships: An Annotated Bibliography

    National Research Council Canada - National Science Library

    Bachmann, Charles M; Fusina, Robert A; Nichols, C. R; McDermid, Jack

    2008-01-01

    This annotated bibliography is a selection of citations to books, articles, documents, and data bases highlighting environmental conditions that impact the safety and performance of amphibious craft...

  16. Semiconductor Manufacturing equipment introduction

    International Nuclear Information System (INIS)

    Im, Jong Sun

    2001-02-01

    This book deals with semiconductor manufacturing equipment. It is comprised of nine chapters, which are manufacturing process of semiconductor device, history of semiconductor manufacturing equipment, kinds and role of semiconductor manufacturing equipment, construction and method of semiconductor manufacturing equipment, introduction of various semiconductor manufacturing equipment, spots of semiconductor manufacturing, technical elements of semiconductor manufacturing equipment, road map of technology of semiconductor manufacturing equipment and semiconductor manufacturing equipment in the 21st century.

  17. Uncovering patterns of consumers' interest for beer: A case study with craft beers.

    Science.gov (United States)

    Donadini, Gianluca; Porretta, Sebastiano

    2017-01-01

    To uncover patterns of consumer interest in craft beers, the authors explored the quality perception of craft beers in a panel of industrial mass-marketed beer drinkers (n=150) and examined the differences in interest for this beer segment between men and women. The authors adopted a conjoint rating experiment in which the respondents were given forty-nine beer profiles to evaluate and were asked to score the degree of interest in each profile on a 9-point scale. Each profile was described on eight attributes (type of brewery, brewing technology, characterizing raw materials, brewhouse equipment, location of the brewery, type of container, retail price, where to buy) varied at different levels. Results showed that Italian consumers placed greatest importance on type of container (30.49%) and on brewing technology (17.64%). Characterizing raw materials (13.44%) and type of brewery (12.64) rank 3 and 4 and were placed in the same band some way below brewing technology. Retail price (9.87%) and where to buy (8.73%) were of far less importance. The least importance of all was attached to brewhouse equipment (4.44%) and to location of the brewery (2.75%). As far as utility values are concerned, the factor level glass bottle+crown cap and the factor level microfiltration are the utilities that most increased the interest of consumers. They were followed by the factor level local grains, stainless steel keg and monastery. In contrast, the factor level PET Keg, aluminum can and large scale corporate brewery showed the greatest negative impact on interest. Men and women shared similar patterns of interest. However, men placed more importance than women on retail price, location of the brewery and where to buy. Women attached more importance than men on type of container, brewing technology and type of brewer. These findings are relevant to understanding consumers'behavior in the beer market and to translating consumer needs, wants and expectations into manufacturing

  18. Ergonomic Analysis of the Work Condition in Aluminum Crafts Industry

    Science.gov (United States)

    Soewardi, H.; Taufiq, A.; Pradipta, T.

    2017-12-01

    Indonesia has plenty of abundant natural wealth. This natural wealth produces natural materials that can be utilized as a craft product. The craft workers generally still work manually and the work is done repeatedly in one cycle so it is very susceptible to musculoskeletal disorders. Musculoskeletal disorders will cause decrease of worker’s effectiveness and efficiency in completing the task. Thus, this fact has some adverse impact for the company. The purpose of this study is to analyze some task in manufacturing a traditional cooking tool (griddle) which encompasses mold of the griddle, refine of the griddle and the finishing touch by using the Occupational Repetitive Action Index (OCRA index) method. This method consists of high frequency movements, large forces, awkward postures, insufficient resting time and other factor such as vibration. Result of this study shows that in the molding operation, the worker has uncertain and medium risk on right hand in manufacturing small and large size of griddle with OCRA index is 2.5 and 5.3 respectively. In the refining operation the worker has light and medium risk on left hand in manufacturing small and large size with OCRA index is 3.6 and 5.8 using grinding machine and 5.8, 5.2, 6.3 and 5.0 using miser tool. In finishing operation, the worker has high risk on right hand in numbering of code griddle and has medium risk on right hand and medium on left hand in labeling with OCRA index is 9, 6.1 and 6.8 While in assembling operation the worker has no risk. Score that it indicates the risk level of the task in such job. Thus the following actions are to improve the work condition ergonomicly in all operation in alumunium craft.

  19. 46 CFR 199.153 - Survival craft launching and recovery arrangements using falls and a winch.

    Science.gov (United States)

    2010-10-01

    ... must not pass near any operating position of the winch, such as hand cranks, pay out wheels, and brake... recovered by any means using power, including a portable power source, safety devices must be provided that automatically cut off the power before the davit arms or falls reach the stops in order to avoid overstressing...

  20. 46 CFR 108.553 - Survival craft launching and recovery arrangements using falls and a winch.

    Science.gov (United States)

    2010-10-01

    ..., safety devices must be provided which automatically cut off the power before the davit arms or falls... not pass near any operating position of the winch, such as hand cranks, payout wheels, and brake...

  1. 46 CFR 133.153 - Survival craft launching and recovery arrangements using falls and a winch.

    Science.gov (United States)

    2010-10-01

    ... pass near any operating position of the winch, such as hand cranks, pay-out wheels, and brake levers... power source, safety devices must be provided which automatically cut off the power before the davit arms or falls reach the stops in order to avoid overstressing the falls or davits, unless the motor is...

  2. A Survivability Assessment of the Transformable Craft in an Operational Environment

    Science.gov (United States)

    2010-06-01

    Robert F. Dell Chairman, Department of Operations Research iv THIS PAGE INTENTIONALLY LEFT BLANK v ABSTRACT Seabasing is developing as a dominant...Scenario..................................................................43 b. Malaysia Scenario...52 b. Malaysia Scenario...................................................................58

  3. Modelling survival

    DEFF Research Database (Denmark)

    Ashauer, Roman; Albert, Carlo; Augustine, Starrlight

    2016-01-01

    The General Unified Threshold model for Survival (GUTS) integrates previously published toxicokinetic-toxicodynamic models and estimates survival with explicitly defined assumptions. Importantly, GUTS accounts for time-variable exposure to the stressor. We performed three studies to test...

  4. Survival analysis

    International Nuclear Information System (INIS)

    Badwe, R.A.

    1999-01-01

    The primary endpoint in the majority of the studies has been either disease recurrence or death. This kind of analysis requires a special method since all patients in the study experience the endpoint. The standard method for estimating such survival distribution is Kaplan Meier method. The survival function is defined as the proportion of individuals who survive beyond certain time. Multi-variate comparison for survival has been carried out with Cox's proportional hazard model

  5. Craft vs. industrial: Habits, attitudes and motivations towards beer consumption in Mexico.

    Science.gov (United States)

    Gómez-Corona, Carlos; Escalona-Buendía, Héctor B; García, Mauricio; Chollet, Sylvie; Valentin, Dominique

    2016-01-01

    Food choices tend to be stable over time; they do not change fast, since consumers tend to act like creatures of habits. However, food habits can evolve, like currently the craft beer category. A change of habits involves a change of perception towards a product. Therefore, what is changing in the perception of beer? Two studies were conducted to address this question. First study was preliminary and aimed at exploring beer consumption habits in Mexico and a better understanding of craft beer representation among beer users. A questionnaire was administrated to 207 consumers in Mexico City during a beer festival. Results showed that respondents could be classified in: industrial beer (41.1%), occasional industrial (24.1%), and craft beer (34.8%) consumers. Craft cluster included mostly 25-35 years old men with high-income level. Among the craft beers cited by respondents from this cluster some are industrial, suggesting that the concept of craft beer might not be well defined, or defined in ideological terms. The second and main study was conducted using consumer ethnographies to understand the motivations and benefits of craft beer consumption. Opposite to industrial, craft beer emerges as an experience-based and symbolic product rather than a utilitarian one. The main motivation for drinking craft beer seems to be the quest of authenticity. Respondents' motivations to drink craft beer are generated by three important factors: desire for more knowledge, new taste experiences, and move away from the mainstream beer consumption. Craft consumers do not drink the product for its functional attributes, they consume it for what it means and as a consequence they build an identity, perceived as more authentic and unique, in comparison to the mainstream industrial beer consumption in Mexico. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. JEAN CLAUDE RENARD: (POETRY AS CRAFT OF TRANSPARENCY

    Directory of Open Access Journals (Sweden)

    María del Sagrario Rollán

    2015-04-01

    Full Text Available The work of Jean-Claude Renard (Toulon 1922- Paris 2002 appears from the beginning marked by the metaphor of the journey - Songs for land lost (1947, and the craft of transparency. The poet begins the journey - that originates in the experience of death and destruction of a world shaken by the war, with a word that transcends the nonsense, and calls for “the country where forgiveness is / and are childhoods “a word that is built in search of human spaces and anticipates them. The adventure through the exercise of Solitude (1951, requirement beyond itself, a kind of internal and painful split: “I am separated from my heart,” releasing it, in turn, to the knowledge of the world and the gift that transfigures. The metamorphosis of the World (1951 takes place in the act of writing itself, for in him a knowledge of the essential reality is given, from which the party of pure celebrated say, “Oh breathing started / in the center of the loaf and snow “. Poetry as craft of transparency J.C. Renard develops in Un autre parole  (1981, prose poetry admirably clarifies its internal relations with theology and mysticism. The poet moves beyond “ailleurs” to a previous or future place of reconciliation and love letters between beings: “One happy pasture / leads above child / each wisdom to your name / and every love your body.”

  7. Overview of craft brewing specificities and potentially associated microbiota.

    Science.gov (United States)

    Rodhouse, Lindsey; Carbonero, Franck

    2017-09-14

    The brewing process differs slightly in craft breweries as compared to industrial breweries, as there are fewer control points. This affects the microbiota of the final product. Beer contains several antimicrobial properties that protect it from pathogens, such as low pH, low oxygen and high carbon dioxide content, and the addition of hops. However, these hurdles have limited power controlling spoilage organisms. Contamination by these organisms can originate in the raw materials, persist in the environment, and be introduced by using flavoring ingredients later in the process. Spoilage is a prominent issue in brewing, and can cause quality degradation resulting in consumer rejection and product waste. For example, lactic acid bacteria are predominately associated with producing a ropy texture and haze, along with producing diacetyl which gives the beer butter flavor notes. Other microorganisms may not affect flavor or aroma, but can retard fermentation by consuming nutrients needed by fermentation yeast. Quality control in craft breweries today relies on culturing methods to detect specific spoilage organisms. Using media can be beneficial for detecting the most common beer spoilers, such as Lactobacillus and Pediococci. However, these methods are time consuming with long incubation periods. Molecular methods such as community profiling or high throughput sequencing are better used for identifying entire populations of beer. These methods allow for detection, differentiation, and identification of taxa.

  8. Job crafting and its impact on work engagement and job satisfaction in mining and manufacturing

    NARCIS (Netherlands)

    De Beer, L.T. (Leon T.); M. Tims (Maria); A.B. Bakker (Arnold)

    2016-01-01

    textabstractThe purpose of this study was to investigate job crafting and its relationship with work engagement and job satisfaction within the South African context. This research is important as job crafting has been shown to have a positive influence on employee motivation. A cross-sectional

  9. Crafting qualities in designing QR-coded embroidery and bedtime stories

    NARCIS (Netherlands)

    Kuusk, K.; Wensveen, S.A.G.; Tomico, O.

    2014-01-01

    There is a renewed interest into crafts and what it can mean when integrating new technologies into textiles. This paper proposes to embed craft qualities and sustainable values into designing smart textile projects. Our design iterations QR-Coded Embroidery and Bedtime Stories combine textiles,

  10. The Need for the United States Army to Possess a Landing Craft with Maneuver Capabilities

    Science.gov (United States)

    2015-06-12

    landing craft after the 2004 Indian Ocean tsunami and the 2009 Myanmar cyclone.9 The landing craft enabled the relief effort to bypass partially...requirements for Army aviation . The Need for America’s Amphibious Capability In his thesis, “The Need for the United States of America’s Amphibious

  11. The job crafting intervention: effects on job resources, self-efficacy, and affective well-being

    NARCIS (Netherlands)

    van den Heuvel, M.; Demerouti, E.; Peeters, M.C.W.

    2015-01-01

    This quasi-experimental field study examines the effects of an intervention designed to boost job resources, affective well-being, and self-efficacy via job crafting behaviour. Employees (n = 39) in a Dutch police district received a 1-day training, after which they worked towards self-set crafting

  12. The job crafting intervention : Effects on job resources, self-efficacy, and affective well-being

    NARCIS (Netherlands)

    van den Heuvel, Machteld; Demerouti, Evangelia; Peeters, Maria|info:eu-repo/dai/nl/07487893X

    2015-01-01

    This quasi-experimental field study examines the effects of an intervention designed to boost job resources, affective well-being, and self-efficacy via job crafting behaviour. Employees (n = 39) in a Dutch police district received a 1-day training, after which they worked towards self-set crafting

  13. Microwave-assisted facile and rapid Friedel-Crafts benzoylation of arenes catalysed by bismuth trifluoromethanesulfonate

    DEFF Research Database (Denmark)

    Tran, Phoung Hoang; Hansen, Poul Erik; Pham, Thuy Than

    2014-01-01

    The catalytic activity of metal triflates was investigated in Friedel–Crafts benzoylation under microwave irradiation. Friedel–Crafts benzoylation with benzoyl chloride of a variety of arenes containing electron-rich and electron-poor rings using bismuth triflate under microwave irradiation is de...

  14. A discussion of the necessity of craft education in the 21st century

    Directory of Open Access Journals (Sweden)

    Eva Veeber

    2015-02-01

    Full Text Available Craft education has held a permanent place in Estonian and Finnish schools, although its value and appreciation have changed over time. The aim of the article is to discuss the necessity of craft education in today’s world and its possible impact on the development of children and adolescents. The discussion seeks an interdisciplinary explanation using three perspectives that complement each other. The first describes the challenges of modern society with respect to individual development and schooling. The second deals with Aaron Antonovsky's theory of generalized resistance resources and an individual's possibility to manage in a stressful society. The third addresses the individual as a developing neurological being, along with the effect of learning and practicing motor skills on the human brain. We conclude that crafts is a multidisciplinary phenomenon, and that learning and practicing crafts promotes the comprehension of diversity and challenges in life. Additionally, educational crafts enriches the learning environment, offering opportunities to develop transferable skills that human beings constantly need in society. In addition, crafts provides a balanced way to come to understand the world and one’s role in it, by simultaneously promoting motor and cognitive development and making unique demands on one’s being.Keywords: crafts, craft education, making, sense of coherence, education, embodiment

  15. 33 CFR 100.916 - Chris Craft Silver Cup Races, Algonac, MI.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Chris Craft Silver Cup Races, Algonac, MI. 100.916 Section 100.916 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY REGATTAS AND MARINE PARADES SAFETY OF LIFE ON NAVIGABLE WATERS § 100.916 Chris Craft Silver Cup...

  16. Shifting Values: The Promotional Policies of Craft and Industrial Design in Flanders (1980-2001)

    NARCIS (Netherlands)

    Gimeno Martinez, J.C.

    2014-01-01

    This article looks at the shifts in cultural promotion of craft as a result of a particular political conjuncture in the region of Flanders (Belgium). In 1991, as a consequence of Belgian federalization, the promotion policies for craft in Flanders passed from being answerable to the Belgian state

  17. Design and Craft Education in Iceland, Pedagogical Background and Development: A Literature Review

    Science.gov (United States)

    Olafsson, Brynjar; Thorsteinsson, Gisli

    2009-01-01

    Sloyd pedagogy was introduced towards the close of the 18th century to Icelandic educators. Subsequently craft was established as a specific subject aimed at general education. In the beginning craft was called "school industry," to distinguish it from "home industry" whose aim was to help homes to be self-sufficient for…

  18. "Miss! I'm Done!" Finishing Craft Assignments as a Situated Activity System in Preschool

    Science.gov (United States)

    Deunk, Marjolein; Berenst, Jan; de Glopper, Kees

    2010-01-01

    We describe the Situated Activity System of finishing craft assignments in preschool: the specific, routinized way that child and teacher jointly close the child's craft assignment, employing a specific discourse pattern. We analyzed the interactions of 14 Dutch children between 2.1 and 3.10 years old while they were finishing their craft…

  19. Cultivating Perspectival Acuity: The Value and Cost of Integrating Theory, Craft, Research, and Practice

    Directory of Open Access Journals (Sweden)

    Joe Manganelli

    2016-10-01

    Full Text Available This paper presents reflections on integrating theory, craft, research, and practice to improve the accuracy and resiliency of each. The reflections build toward a set of statements about the value and the cost of integrating theory, craft, research, and practice. Specifically, the authors offer the Privileged Work / Non-Privileged Work Framework and concept of cultivating Perspectival Acuity.

  20. Digitizing Craft: Creative Writing Studies and New Media--A Proposal

    Science.gov (United States)

    Koehler, Adam

    2013-01-01

    This article identifies and examines a digital arm of creative writing studies and organizes that proposal into four categories through which to theorize the "craft" of creative production, each borrowed from Tim Mayers's "(Re)Writing Craft: Composition, Creative Writing, and the Future of English Studies": process, genre, author, and…

  1. Cooking and Hammering: Primary School Pupils' Concepts of Their Craft Skills

    Science.gov (United States)

    Müürsepp, Mare; Kikkull, Andry

    2014-01-01

    The aim of the study is to clear the significance of craft skills for the pupils in age nine and twelve years. More than 200 pupils were asked to define, what are the most important skills for the pupils of their age. The results bring out that category of the skills related to craft subject is of the most presented categories in pupils' self…

  2. Job crafting at the team and individual level: Implications for work engagement and performance

    NARCIS (Netherlands)

    Tims, M.; Bakker, A.B.; Derks, D.; Rhenen, van W.

    2013-01-01

    Previous research suggests that employee job crafting is positively related to job performance through employee work engagement. The present study expands this individual-level perspective to the team level by hypothesizing that team job crafting relates positively to team performance through team

  3. The Influence of Future Time Perspective on Worker Outcomes: The Role of Job Crafting

    NARCIS (Netherlands)

    Kooij, T.A.M.; Tims, M.; Akkermans, J.

    2017-01-01

    This two-wave study aimed to examine future time perspective (FTP) as an antecedent of job crafting, and in turn job crafting as a mediator in associations between FTP and work outcomes. Based on the lifespan socio-emotional selectivity theory, we expected that open-ended and limited FTP would evoke

  4. Workaholism versus work engagement and job crafting : What is the role of self-management strategies?

    NARCIS (Netherlands)

    Zeijen, Marijntje E.L.; Peeters, Maria C.W.; Hakanen, Jari J.

    2018-01-01

    Job crafting refers to the proactive actions employees take to redesign their jobs in order to get a better fit with their competencies, expectations, and wishes. So far, little is known about job crafting's underlying mechanisms. In this study, we examine how two different states of affective

  5. Workaholism versus work engagement and job crafting : What is the role of self-management strategies?

    NARCIS (Netherlands)

    Zeijen, M.; Peeters, M.C.W.; Hakanen, J.

    Job crafting refers to the proactive actions employees take to redesign their jobs in order to get a better fit with their competencies, expectations, and wishes. So far, little is known about job crafting's underlying mechanisms. In this study, we examine how two different states of affective

  6. Report: The New Brunswick Indian Arts and Crafts Association Workshop for Board Members. No. 165.

    Science.gov (United States)

    Goddu, Roland; Nicholas, Darryl

    This is a report on a training session conducted for the board members of the New Brunswick Indian Arts and Crafts Association with the aim of outlining purposes of the Association, and assisting in drawing up plans for a formal administrative structure among arts and crafts organizations. An administrative manual containing terms of reference…

  7. The Development of Indian and Eskimo Art and Crafts in the Far North.

    Science.gov (United States)

    Phillips, R. A. J.; And Others

    The focus of the conference, "The Development of Indian and Eskimo Art and Crafts in the Far North," was the creation of a market for reputable Indian and Eskimo art work on an economically sound basis which would benefit both the native artists and the Canadian economy. Two governmental reports, "Northern Arts and Crafts" and…

  8. The impact of job crafting on job demands, job resources, and well-being

    NARCIS (Netherlands)

    Tims, M.; Bakker, A.B.; Derks, D.

    2013-01-01

    This longitudinal study examined whether employees can impact their own well-being by crafting their job demands and resources. Based on the Job Demands-Resources model, we hypothesized that employee job crafting would have an impact on work engagement, job satisfaction, and burnout through changes

  9. Computer Technology-Integrated Projects Should Not Supplant Craft Projects in Science Education

    Science.gov (United States)

    Klopp, Tabatha J.; Rule, Audrey C.; Schneider, Jean Suchsland; Boody, Robert M.

    2014-01-01

    The current emphasis on computer technology integration and narrowing of the curriculum has displaced arts and crafts. However, the hands-on, concrete nature of craft work in science modeling enables students to understand difficult concepts and to be engaged and motivated while learning spatial, logical, and sequential thinking skills. Analogy…

  10. Selection of equipment for equipment qualification

    International Nuclear Information System (INIS)

    Torr, K.G.

    1989-01-01

    This report describes the methodology applied in selecting equipment in the special safety systems for equipment qualification in the CANDU 600 MW nuclear generating stations at Gentilly 2 and Point Lepreau. Included is an explanation of the selection procedure adopted and the rationale behind the criteria used in identifying the equipment. The equipment items on the list have been grouped into three priority categories as a planning aid to AECB staff for a review of the qualification status of the special safety systems

  11. When craft and science collide: Improving therapeutic practices through evidence-based innovations.

    Science.gov (United States)

    Justice, Laura M

    2010-04-01

    Evidence-based practice (EBP) is a model of clinical decision-making that is increasingly being advocated for use in the field of speech-language pathology. With the increased emphasis on scientific evidence as a form of knowledge important to EBP, clinicians may wonder whether their craft-based knowledge (i.e., knowledge derived from theory and practice), remains a legitimate form of knowledge for use in clinician decisions. This article describes forms of knowledge that may be used to address clinical questions, to include both craft and science. Additionally, the steps used when engaging in EBP are described so that clinicians understand when and how craft comes into play. The major premise addressed within this article is that craft is a legitimate form of knowledge and that engagement in EBP requires one to employ craft-based knowledge.

  12. 46 CFR 24.15-5 - Canadian pleasure craft temporarily using navigable waters of the United States.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Canadian pleasure craft temporarily using navigable... SECURITY UNINSPECTED VESSELS GENERAL PROVISIONS Equivalents § 24.15-5 Canadian pleasure craft temporarily using navigable waters of the United States. Uninspected Canadian pleasure craft (uninspected vessels...

  13. 33 CFR 125.15 - Access to waterfront facilities, and port and harbor areas, including vessels and harbor craft...

    Science.gov (United States)

    2010-07-01

    ..., and port and harbor areas, including vessels and harbor craft therein. 125.15 Section 125.15....15 Access to waterfront facilities, and port and harbor areas, including vessels and harbor craft....09 to those waterfront facilities, and port and harbor areas, including vessels and harbor craft...

  14. 25 CFR 309.24 - How will statements about Indian origin of art or craft products be interpreted?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false How will statements about Indian origin of art or craft products be interpreted? 309.24 Section 309.24 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.24 How will statements about Indian origin of...

  15. 77 FR 32985 - Notice of Inventory Completion: U.S. Department of the Interior, Indian Arts and Crafts Board...

    Science.gov (United States)

    2012-06-04

    ... Inventory Completion: U.S. Department of the Interior, Indian Arts and Crafts Board, Museum of the Plains... Plains Indian, Indian Arts and Crafts Board, has completed an inventory of human remains, in consultation..., Indian Arts and Crafts Board. Disposition of the human remains to the Indian tribes stated below may...

  16. Low-cost silicon wafer dicing using a craft cutter

    KAUST Repository

    Fan, Yiqiang

    2014-05-20

    This paper reports a low-cost silicon wafer dicing technique using a commercial craft cutter. The 4-inch silicon wafers were scribed using a crafter cutter with a mounted diamond blade. The pre-programmed automated process can reach a minimum die feature of 3 mm by 3 mm. We performed this scribing process on the top polished surface of a silicon wafer; we also created a scribing method for the back-unpolished surface in order to protect the structures on the wafer during scribing. Compared with other wafer dicing methods, our proposed dicing technique is extremely low cost (lower than $1,000), and suitable for silicon wafer dicing in microelectromechanical or microfluidic fields, which usually have a relatively large die dimension. The proposed dicing technique is also usable for dicing multiple project wafers, a process where dies of different dimensions are diced on the same wafer.

  17. Professional Interventions as a State-Crafting Grammar

    DEFF Research Database (Denmark)

    Ydesen, Christian; Øland, Trine

    2015-01-01

    of reasoning. The second part titled ‘Theoretical concepts: State, Profession, Immigrant’ aims at presenting and clarifying the triad ‘state – profession – immigrant’ through the conceptual lens of state as a bureaucratic field and state-crafting. The third part designated ‘Working with historical sources......The first part under the headline ‘Theory and the construction of the research object’ will clarify our concept of theory and the Bourdieusian and Wacquantian way of working with theory and theoretical constructions when doing empirical and historical work as basis for the article’s chain......’ consists of three subsections altogether. The first addresses in brief the question of putting the theoretical model into work empirically focussing on the concept of field to avoid determinism and presentism when working with a com-prehensive theoretical framework. The second and third subsections takes...

  18. Understanding and crafting the mix the art of recording

    CERN Document Server

    Moylan, William

    2014-01-01

    Understanding and Crafting the Mix, 3rd edition provides the framework to identify, evaluate, and shape your recordings with clear and systematic methods. Featuring numerous exercises, this third edition allows you to develop critical listening and analytical skills to gain greater control over the quality of your recordings. Sample production sequences and descriptions of the recording engineer's role as composer, conductor, and performer provide you with a clear view of the entire recording process. Dr. William Moylan takes an inside look into a range of iconic popular music, thus offering insights into making meaningful sound judgments during recording. His unique focus on the aesthetic of recording and mixing will allow you to immediately and artfully apply his expertise while at the mixing desk. A companion website features recorded tracks to use in exercises, reference materials, additional examples of mixes and sound qualities, and mixed tracks.

  19. Crafting Sustainable Development Solutions: Frugal Innovations of Grassroots Entrepreneurs

    Directory of Open Access Journals (Sweden)

    Mario Pansera

    2016-01-01

    Full Text Available A shift in the entrepreneurial landscape is taking place brought about by grassroots innovators with little formal education and technological knowhow, living and working in penurious environments. This research represents an emerging third wave of literature on Bottom of the Pyramid innovation, where products are offered for and by the underserved. Using primary and secondary data derived from four cases of grassroots entrepreneurs in the Indian Subcontinent, the study explores the phenomenon where resource scarce entrepreneurs craft solutions that are environmental friendly, with low overall ownership costs, and use locally available material. We argue that the grassroots phenomenon can be fruitfully exploited to achieve the new Sustainable Development Goals proposed by the UN as a post-2015 strategy for the future of global governance. These innovations might have a tremendous impact not only in terms of serving unmet and ignored consumer needs, but also longer term impacts through enhanced productivity, sustainability, poverty reduction and inclusion promotion.

  20. Design- and Craft thinking analysed as Embodied Cognition

    Directory of Open Access Journals (Sweden)

    Camilla Groth

    2016-06-01

    Full Text Available Through the concept of design thinking the act of designing is presented as an intellectual activity, and the act of planning the design is elevated over the making process. However, the importance of materiality and the embodied sense-making that occurs in this context should not be forgotten. In this study, embodied cognition in design and craft practices was investigated through three case studies. The study takes on an enhanced tactile perspective as a methodological platform; thus, the cases involve 1 deafblind makers in ceramics, 2 a practice-led self-study report on tactile experiences while working with clay and 3 a study on design students’ use of their tactile sense during material exploration. The results show that the act of thinking design involves the body as a knowledge provider.

  1. Multipurpose stabilization of the advanced marine surface crafts

    Directory of Open Access Journals (Sweden)

    Sevostyanov Ruslan A.

    2016-01-01

    Full Text Available Advanced marine surface crafts, such as SWATHs, catamarans or hovercrafts become more and more popular for a great range of various tasks. They usually operate at much higher speed than conventional ships. Moreover, in the open sea there are a lot of requirements and restrictions concerning the quality of such crafts’ dynamics, especially in case of the wind or waves. This paper considers application of the control law with a special multipurpose structure for autopilot design for amphibious air cushion vehicles. Such control law allows to decompose the autopilot task into simpler optimization subtasks. Efficiency of this approach is shown in the task of stabilizing yaw angle of the air cushion vehicle in the different weather conditions.

  2. Striving towards improved Friedel-Crafts acylation catalysts

    International Nuclear Information System (INIS)

    Scott, N.M.; Deacon, G.B.

    1998-01-01

    Full text: Lanthanum, ytterbium and scandium salts of trifluoromethanesulfonic acid have been shown to act as promising Lewis acid catalysts for the Friedel-Craft acylation reactions. In our study catalytic acylation of anisole by acetic anhydride in nitroethane was investigated. Yields were determined after extraction of para-methoxyacetophenone from the reaction mixture by G.L.C using the external standardisation method. Anhydrous lanthanoid tris-triflate salts [Ln(O 3 SCF 3 ) 3 , Ln La, Y, Nd, Eu and Yb] were initially investigated as catalysts. Ytterbium tris-triflate was found to be the most effective giving ∼90% of the acylation product. The hydrated lanthanide tris-nitrate salts [Ln(NO 3 ) 3 .nH 2 O, Ln = La, Nd, Eu and Yb] were also investigated using in situ dehydration with acetic anhydride. These were found to have low solubility in the reaction mixture and gave poor yields of para-methoxyacetophenone. The formation of side products was suggested by the low total recovery of anisole and para-methoxyacetophenone. The blocking of coordination sites of these catalysts by tetraglyme resulted in a 50% reduction in acylation activity compared with the simple salt. Addition of Li(O 3 SCF 3 ) to Ln(O 3 SCF 3 ) 3 catalysts (ratio of 4:1)had only a slight accelerating effect on the Friedel-Crafts acylation reaction and the yield was only marginally greater than that in the absence of the added salt. In contrast Li(ClO 4 ) dramatically decreased reaction times and improved the yield of para-methoxyace-tophenone, as recently reported

  3. The impact of job crafting on job demands, job resources, and well-being.

    Science.gov (United States)

    Tims, Maria; Bakker, Arnold B; Derks, Daantje

    2013-04-01

    This longitudinal study examined whether employees can impact their own well-being by crafting their job demands and resources. Based on the job demands-resources model, we hypothesized that employee job crafting would have an impact on work engagement, job satisfaction, and burnout through changes in job demands and job resources. Data was collected in a chemical plant at three time points with one month in between the measurement waves (N = 288). The results of structural equation modeling showed that employees who crafted their job resources in the first month of the study showed an increase in their structural and social resources over the course of the study (2 months). This increase in job resources was positively related to employee well-being (increased engagement and job satisfaction, and decreased burnout). Crafting job demands did not result in a change in job demands, but results revealed direct effects of crafting challenging demands on increases in well-being. We conclude that employee job crafting has a positive impact on well-being and that employees therefore should be offered opportunities to craft their own jobs.

  4. Legal and economic implications of the German Craft Code Amendment 2004

    Directory of Open Access Journals (Sweden)

    Wolfgang Benzel

    2012-01-01

    Full Text Available As the main reason for initiating an amendment of the Trade and Crafts Code in 2004 was the decrease in the number of companies in general and the number of skilled crafts enterprises in particular and was also due to the fact that the number of employees in the skilled crafts sector had constantly fallen and many companies were not able to find a successor, it was the declared aim of the amendment to counter this structural crisis as well as reducing illegal employment and removing native discrimination. This would then ensure a higher level of employment especially through new company formations and takeovers of existing companies.In addition to providing an important contribution towards the assessment of the basic success of the 2004 Trade and Crafts Code amendment, the results can therefore be used at an international level for discussions on skilled crafts legislation outside Germany. As German skilled crafts legislation developed in a completely different manner from skilled crafts legislation in most other European countries, this aspect is particularly significant and it is conceivable that the results will be useful beyond the borders of the Federal Republic of Germany. The research findings will also be important in determining the limits of deregulation and when it can be considered counterproductive from an economic point of view.

  5. Analyzing components of Community Reinforcement and Family Training (CRAFT): Is treatment entry training sufficient?

    Science.gov (United States)

    Kirby, Kimberly C; Benishek, Lois A; Kerwin, MaryLouise E; Dugosh, Karen L; Carpenedo, Carolyn M; Bresani, Elena; Haugh, James A; Washio, Yukiko; Meyers, Robert J

    2017-11-01

    Community Reinforcement and Family Training (CRAFT) assists family members with a treatment-resistant loved one. The most consistent outcome of CRAFT is increased treatment entry of the identified treatment-resistant person (IP). This led us to question whether all 6 components of CRAFT are necessary. In a randomized clinical trial, 115 concerned significant others (CSOs) of an IP received 12-14 sessions of the full CRAFT intervention, 4-6 sessions focused on Treatment Entry Training (TEnT), or 12-14 sessions of Al-Anon/Nar-Anon Facilitation (ANF). We monitored treatment entry, attendance, and substance use of the IP and the CSO's mood and functioning. Data were collected at baseline and 4, 6, and 9 months after the baseline. We found significant reductions in time to treatment entry (χ(2)2 = 8.89, p = .01) and greater treatment entry rates for CRAFT (62%; odds ratio [OR] = 2.7, 95% confidence interval [CI] = 1.1-6.9) and TEnT (63%; OR = 2.9, 95% CI = 1.2-7.5) compared with ANF (37%), but CRAFT and TEnT did not differ significantly from each other (OR = 1.1, 95% CI = 0.4-2.7). No between-group differences in IP drug use were reported by CSOs, but days of drug use decreased over time for all groups (F(3, 277) = 13.47, p CRAFT produces greater treatment entry rates than ANF and found similar treatment entry rates for CRAFT and TEnT. This suggests that treatment entry training is sufficient for producing the best established outcome of CRAFT. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  6. Self-crafting vegetable snacks: testing the IKEA-effect in children.

    Science.gov (United States)

    Raghoebar, Sanne; van Kleef, Ellen; de Vet, Emely

    2017-01-01

    The purpose of this paper is to test whether the IKEA-effect (Norton et al. , 2012) - better liking for self-crafted products than for identical products crafted by others - can be exploited to increase liking and consumption of vegetable snacks in children. A between-subjects experiment was conducted at an after school care facility. In total, 86 children aged four to six either crafted a peacock with vegetables or with non-food objects following an example. After the task, children ate snack vegetables ad libitum, and rated their liking for the vegetables and pride in crafting the peacock. No significant main effect of the vegetable snack creation on consumption and liking was observed. Also, perceived pride did not mediate the effect of self-crafting vegetable snacks on consumption of and liking for vegetables. Vegetable consumption did not differ between children who were either simply exposed to vegetable snacks while crafting or those who were crafting the vegetable snacks themselves. The equal consumption might suggest that this is caused by simple exposure, but more research is needed comparing self-crafting and exposure to a condition where there is no initial exposure to vegetables. Although the IKEA-effect has been demonstrated in adults, this is one of the first studies evaluating the IKEA-effect in children and as a means to increase liking for a generally disliked product in this target group, i.e. vegetables. The IKEA-effect could not be replicated under these more stringent conditions, where the experimental set-up enabled disentangling exposure and crafting effects.

  7. High Job Demands, Still Engaged and Not Burned Out? The Role of Job Crafting.

    Science.gov (United States)

    Hakanen, Jari J; Seppälä, Piia; Peeters, Maria C W

    2017-08-01

    Traditionally, employee well-being has been considered as resulting from decent working conditions arranged by the organization. Much less is known about whether employees themselves can make self-initiated changes to their work, i.e., craft their jobs, in order to stay well, even in highly demanding work situations. The aim of this study was to use the job demands-resources (JD-R model) to investigate whether job crafting buffers the negative impacts of four types of job demands (workload, emotional dissonance, work contents, and physical demands) on burnout and work engagement. A questionnaire study was designed to examine the buffering role of job crafting among 470 Finnish dentists. All in all, 11 out of 16 possible interaction effects of job demands and job crafting on employee well-being were significant. Job crafting particularly buffered the negative effects of job demands on burnout (7/8 significant interactions) and to a somewhat lesser extent also on work engagement (4/8 significant interactions). Applying job crafting techniques appeared to be particularly effective in mitigating the negative effects of quantitative workload (4/4 significant interactions). By demonstrating that job crafting can also buffer the negative impacts of high job demands on employee well-being, this study contributed to the JD-R model as it suggests that job crafting may even be possible under high work demands, and not only in resourceful jobs, as most previous studies have indicated. In addition to the top-down initiatives for improving employee well-being, bottom-up approaches such as job crafting may also be efficient in preventing burnout and enhancing work engagement.

  8. Arts and Crafts Classes in Years I–III, Based on Methods Featuring Pupils’ Practical Activities

    OpenAIRE

    Piwowarska, Ewa

    2016-01-01

    The issue to be analysed here concerns teachers’ planning of arts and crafts classes in Years I–III, with specific reference to methods featuring pupils’ practical activities. A theoretical part briefly presents the concepts involved in teaching a subject that was initially defined as drawing, then as arts and crafts education, and finally as arts and crafts classes. It points out the factors that influence the process of stimulating pupils’ artistic activities. The technique used in the cour...

  9. Use your eyes - metallographic versus superficial traces of the crafting of Bronze Age ornaments

    DEFF Research Database (Denmark)

    Nørgaard, Heide Wrobel

    and superficial archaeological examinations can be used to understand prehistoric craft. Furthermore, it will show that with an intensive knowledge about previous scientific investigations the superficial traces preserved can reveal a great amount of information and could talk for themselves. Taking as an example...... the early and middle Bronze Age bronze ornaments from North Germany, superficial traces of the metal crafting process, visible with the naked eye, will be compared with metallographic images. The aim of this presentation is to give an overview over the crafting traces everybody could see (with a bit...

  10. The effects of job crafting on subjective well-being amongst South African high school teachers

    Directory of Open Access Journals (Sweden)

    Sergio Peral

    2016-09-01

    Full Text Available Orientation: Job crafting can result in a number of positive outcomes for teachers, such as increased meaningfulness and engagement at work. Increased work engagement and psychological meaningfulness may yield positive benefits for the practice of teaching, thus highlighting the pivotal role of job crafting. Research purpose: The study’s aim was to investigate the relationship between job crafting and subjective well-being amongst South African high school teachers. Subjective well-being comprises psychological meaningfulness and work engagement. The potential mediating effect that psychological meaningfulness had on this relationship was further explored. Motivation for the study: Being in a highly stressful occupation, teachers need to continuously find ways to craft their working practices in order to deal effectively with their job demands and to capitalise on their available job resources. Furthermore, South Africa’s current education system calls for serious proactive measures to be taken to improve and rectify the current status, such as job crafting. Research approach, design and method: A quantitative, cross-sectional survey design was used and administered to a sample of South African high school teachers situated in Gauteng, South Africa (N = 251. Main findings: A positive relationship was found between job crafting (increasing structural resources and challenging job demands and work engagement. Furthermore, psychological meaningfulness mediated the relationship between job crafting and work engagement amongst the sampled high school teachers. Practical/managerial implications: Teachers who craft their work to better suit their preferences and needs will obtain greater meaning in their work and experience increased levels of work engagement. Training programmes and/or group-based interventions targeted around job crafting techniques may be particularly useful in the South African teaching context. Contribution/value-add: This

  11. Taking control: Is job crafting related to the intention to leave surgical training?

    Science.gov (United States)

    Dominguez, Luis Carlos; Stassen, Laurents; de Grave, Willem; Sanabria, Alvaro; Alfonso, Edgar; Dolmans, Diana

    2018-01-01

    The intention to leave surgical training, hereinafter referred as proxy of "attrition," is associated with poor well-being in the workplace. Attrition is suggested to diminish when residents possess job-crafting skills, that is, the ability to redefine their job in meaningful ways and maximize well-being at work by increasing structural and social resources and challenges and decreasing hindering demands. However, the evidence supporting this relationship is scant. This study sought to: 1) investigate to what extent residents possess job-crafting skills and compare residents' levels of job-crafting skills across years of residency training; 2) investigate the relationship between job crafting, well-being as measured by burnout and work-engagement rates, and the intention to leave; and 3) compare the levels of job-crafting skills and well-being between residents with and without serious intentions to leave. This cross sectional study was conducted in fifteen residency programs in Colombia. Surgical residents completed different questionnaires including the Dutch Job Crafting Scale (DJCS), MBI-Human Services Survey (MBI-HSS), Utrecht Work Engagement Scale (UWES-17) and an adapted version of the Nurse Turnover Intention Scale (NTIS). The objectives were addressed by independent analyses of variance (ANOVA), structural equation modeling techniques (SEM) and independent t-tests, respectively. A total of 202 residents participated. Residents generally scored high on their job-crafting skills to increase structural and social resources as well as challenging demands, but were less positive about their skills to reduce hindering demands. No differences across years of training were found. Job crafting correlated positively with work-engagement, which was inversely related to the intention to leave. Conversely, job crafting correlated negatively with burnout, which bore a positive relationship to the intention to leave. Residents with serious intentions to leave exhibited

  12. Preservation of Cultural Heritage Embodied in Traditional Crafts in the Developing Countries. A Case Study of Pakistani Handicraft Industry

    Directory of Open Access Journals (Sweden)

    Yongzhong Yang

    2018-04-01

    Full Text Available Cultural heritage embodied in traditional crafts is an integral part of any nation which reflects the culture and tradition of a particular region. Although the importance of handicraft has been widely recognized, the literature regarding preservation of traditional craft is scarce. The present paper aimed to explore and identify issues faced by traditional craftsmanship in developing countries and to address those issues in order to contribute to the sustainability of traditional craft heritage and ensure continuous transmission of craft skills and knowledge from generation to generation. Our study identified several key issues which poses substantial challenges to the preservation of traditional craft heritage in developing countries. In order to add empirical evidence, we examined the case of Pakistani handicraft industry that provided further understanding of highlighted issues which traditional craft heritage face. We have suggested some policies to promote, develop and preserve the traditional craft heritage. The significance of these policy suggestions is underlined with the case study of Pakistan.

  13. 25 CFR 309.9 - When can non-Indians make and sell products in the style of Indian arts and crafts?

    Science.gov (United States)

    2010-04-01

    ... of Indian arts and crafts? 309.9 Section 309.9 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.9 When can non-Indians make and sell products in the style of Indian arts and crafts? A non-Indian can make and sell products in the style of...

  14. 25 CFR 309.1 - How do the regulations in this part carry out the Indian Arts and Crafts Act of 1990?

    Science.gov (United States)

    2010-04-01

    ... Arts and Crafts Act of 1990? 309.1 Section 309.1 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.1 How do the regulations in this part carry out the Indian Arts and Crafts Act of 1990? These regulations define the nature and Indian origin...

  15. Legal status of crew members on pleasure craft and vessels used in nautical tourism

    Directory of Open Access Journals (Sweden)

    Giovanni Marchiafava

    2018-02-01

    Full Text Available The paper aims at examining the issues related to the legal status of crew members of pleasure craft and vessels used in nautical tourism from an Italian perspective. Firstly, the definition of crew and its composition on pleasure craft and vessels is examined. Additionally, the legal regime of crew members together with the crew on-board documentation, is discussed. Furthermore, the main similarities and dissimilarities of the crew regime according to the type of pleasure craft and vessel and their use, as well as, the on-board services, is dealt with. Finally, the issue related to the legal classification of ‘’guests’’, undertaking complementary on-board services of pleasure craft and vessels is considered.

  16. Cooking and Hammering: Primary School Pupils' Concepts of their Craft Skills

    Directory of Open Access Journals (Sweden)

    Mare MÜÜRSEPP

    2014-07-01

    Full Text Available The aim of the study is to clear the significance of craft skills for the pupils in age nine and twelve years. More than 200 pupils were asked to define, what are the most important skills for the pupils of their age. The results bring out that category of the skills related to craft subject is of the most presented categories in pupils' self description. Thus the primary school pupils essentially defined themselves by the activities they could do practically (building, cooking, repairing of things. The most undefined relation to craft activities is reflected in the answer of smaller boys in our study. A suspicion arisen from the analysis of pupils' sayings, that the craft lessons in the 1st school stage tend to be organized kind of poorly was asserted by the teachers who pointed out the need for special rooms and materials to implement different techniques.

  17. SUSTAINABLE WASTE MANAGEMENT OF TRADITIONAL CRAFT INDUSTRY IN LOPATI TOURISM VILLAGE, YOGYAKARTA

    OpenAIRE

    VITASURYA Vincentia Reni; PUDIANTI Anna

    2016-01-01

    Ecotourism has been growing in Yogyakarta that can be seen through the development of rural tourism. The development of rural tourism has positive impact to improve local community’s welfare nevertheless, it has also negative impact onto environmental carrying capacity. Lopati tourism village is located in Bantul, Yogyakarta, relying on traditional craft industry as tourism attraction. Traditional crafts are livelihood of local residents, so that environmental management efforts become part o...

  18. Investigations of Thickness Requirement in DNV Rules for High-Speed Craft

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Zhang, Shengming

    1997-01-01

    Simple formulas for determining impact strength of high-speed craft collisions with floating objects are given in this note. Thereby the minimum mass of a floating object that just ruptures the shell plating is predicted. The minimum thickness requirements of DNV rules for aluminiumcrafts and GRP...... single skin crafts can be converted to critical impact energy and minimum object mass. Some comparisons show an acceptable agreement between present method and DNV test results....

  19. Job crafting, work engagement, and psychological distress among Japanese employees: a cross-sectional study.

    Science.gov (United States)

    Sakuraya, Asuka; Shimazu, Akihito; Eguchi, Hisashi; Kamiyama, Kimika; Hara, Yujiro; Namba, Katsuyuki; Kawakami, Norito

    2017-01-01

    Job crafting, an employee-initiated job design/redesign, has become important for employees' well-being. However, most studies on the relationship between job crafting and employees' well-being have been conducted in western countries; thus, it is unclear whether job crafting can be effectively applied to Asian cultures, such as Japan, which emphasizes group harmony. The aim of this study was to examine the cross-sectional associations of self-reported job crafting with work engagement and psychological distress among employees in Japan. A questionnaire survey through the internet was conducted among all employees of a manufacturing company in Japan. We analyzed the data from 894 respondents, all employees with regular employment. Job crafting, work engagement, and psychological distress were assessed using the Japanese version of the Job Crafting Questionnaire, the Japanese version of the Utrecht Work Engagement Scale (UWES), and the Brief Job Stress Questionnaire (BJSQ), respectively. Hierarchical multiple regression showed that increasing structural job resources, social job resources, and challenging job demands was significantly and positively associated with work engagement ( β  = 0.31, p  engagement and lower psychological distress. In addition, increasing social job resources and challenging job demands are also associated with higher work engagement.

  20. Purpose and pleasure in late life: Conceptualising older women's participation in art and craft activities.

    Science.gov (United States)

    Liddle, Jeannine L M; Parkinson, Lynne; Sibbritt, David W

    2013-12-01

    The fourth age, as the last stage of life, represents a final challenge to find personal meaning in the face of changing capacities, illness and disability. Participation in valued activities is important for sustaining interest in life and has been associated with enhanced health and well-being. Art and craft activities are a popular form of participation amongst women in late life with growing international interest in the potential for these types of activities to maintain health and well-being and address problems of social isolation. Drawing on open text comments from 114 women enrolled in the Australian Longitudinal Study on Women's Health and in-depth interviews with 23 women all aged in their eighties, this paper explores the nature of older women's participation in art and craft activities and conceptualises links between participation in these activities and health and well-being in late life. Participation in art and craft activities is complex and dynamic, comprising cognitive and physical processes infused with emotion and occurs in the context of social relationships, physical spaces, physical ailments and beliefs about the value of the activities. By participating in art and craft activities, older women find purpose in their lives, contributing to their subjective well-being whilst helping and being appreciated by others. They develop a self view as enabled and as such take on new art and craft challenges, continue to learn and develop as art and craft makers and remain open to new possibilities. © 2013.

  1. Job crafting among health care professionals: The role of work engagement.

    Science.gov (United States)

    Bakker, Arnold B

    2018-04-01

    The aim of this study was to examine the impact of job crafting on the quality of the work environment of health care professionals. Job crafting refers to proactive behavior aimed at optimizing the fit between person and job. Using job demands-resources theory, we hypothesized that job crafting would be positively related to job resources and person-organisation fit, and negatively to hindrance demands. Furthermore, we hypothesized that these relationships would be qualified by work engagement. A total of 5,272 health care professionals from one of 35 different organisations filled out an electronic questionnaire (response is 55%). Regression analyses were used to test hypotheses. Consistent with hypotheses, job crafting in the form of increasing job resources was positively related to opportunities for development, performance feedback and P-O fit; and negatively related to hindrance job demands - particularly when work engagement was high. The combination of job crafting and work engagement is important for the realization of a resourceful work environment and fit between person and organisation. Interventions aimed at fostering job crafting should be tailored to the motivation of health care professionals. © 2017 John Wiley & Sons Ltd.

  2. New Methods for Crafting Locally Decision-Relevant Scenarios

    Science.gov (United States)

    Lempert, R. J.

    2015-12-01

    Scenarios can play an important role in helping decision makers to imagine future worlds, both good and bad, different than the one with which we are familiar and to take concrete steps now to address the risks generated by climate change. At their best, scenarios can effectively represent deep uncertainty; integrate over multiple domains; and enable parties with different expectation and values to expand the range of futures they consider, to see the world from different points of view, and to grapple seriously with the potential implications of surprising or inconvenient futures. These attributes of scenario processes can prove crucial in helping craft effective responses to climate change. But traditional scenario methods can also fail to overcome difficulties related to choosing, communicating, and using scenarios to identify, evaluate, and reach consensus on appropriate policies. Such challenges can limit scenario's impact in broad public discourse. This talk will demonstrate how new decision support approaches can employ new quantitative tools that allow scenarios to emerge from a process of deliberation with analysis among stakeholders, rather than serve as inputs to it, thereby increasing the impacts of scenarios on decision making. This talk will demonstrate these methods in the design of a decision support tool to help residents of low lying coastal cities grapple with the long-term risks of sea level rise. In particular, this talk will show how information from the IPCC SSP's can be combined with local information to provide a rich set of locally decision-relevant information.

  3. Shipboard and laboratory equipment

    Digital Repository Service at National Institute of Oceanography (India)

    Shyamprasad, M.; Ramaswamy, V.

    The polymetallic nodules occur at an average depth of 4500 m. Adequate equipment and techniques are required for the exploration at such depths. Shipboard and various laboratory equipments for the sampling of polymetallic nodules is described...

  4. Remote handling equipment

    International Nuclear Information System (INIS)

    Clement, G.

    1984-01-01

    After a definition of intervention, problems encountered for working in an adverse environment are briefly analyzed for development of various remote handling equipments. Some examples of existing equipments are given [fr

  5. Practical approaches to implementing facility wide equipment strengthening programs

    International Nuclear Information System (INIS)

    Kincaid, R.H.; Smietana, E.A.

    1989-01-01

    Equipment strengthening programs typically focus on components required to ensure operability of safety related equipment or to prevent the release of toxic substances. Survival of non-safety related equipment may also be crucial to ensure rapid recovery and minimize business interruption losses. Implementing a strengthening program for non-safety related equipment can be difficult due to the large amounts of equipment involved and limited budget availability. EQE has successfully implemented comprehensive equipment strengthening programs for a number of California corporations. Many of the lessons learned from these projects are applicable to DOE facilities. These include techniques for prioritizing equipment and three general methodologies for anchoring equipment. Pros and cons of each anchorage approach are presented along with typical equipment strengthening costs

  6. BP volume reduction equipment

    International Nuclear Information System (INIS)

    Kitamura, Yoshinori; Muroo, Yoji; Hamanaka, Isao

    2003-01-01

    A new type of burnable poison (BP) volume reduction system is currently being developed. Many BP rods, a subcomponent of spent fuel assemblies are discharged from nuclear power reactors. This new system reduces the overall volume of BP rods. The main system consists of BP rod cutting equipment, equipment for the recovery of BP cut pieces, and special transport equipment for the cut rods. The equipment is all operated by hydraulic press cylinders in water to reduce operator exposure to radioactivity. (author)

  7. Survival Analysis

    CERN Document Server

    Miller, Rupert G

    2011-01-01

    A concise summary of the statistical methods used in the analysis of survival data with censoring. Emphasizes recently developed nonparametric techniques. Outlines methods in detail and illustrates them with actual data. Discusses the theory behind each method. Includes numerous worked problems and numerical exercises.

  8. Greener Friedel-Crafts Acylation using Microwave-enhanced reactivity of Bismuth Triflate in the Friedel-Crafts Benzoylation of Aromatic Compounds with Benzoic Anhydride

    DEFF Research Database (Denmark)

    Tran, Phuong Hoang; Nguyen, Hai Truong; Hansen, Poul Erik

    2017-01-01

    An efficient and facile bismuth trifluoromethanesulfonate-catalyzed benzoylation of aromatic compounds using benzoic anhydride under solvent-free microwave irradiation has been developed. The microwave-assisted Friedel-Crafts benzoylation results in good yields within short reaction times. Bismuth...

  9. Electrical equipment qualification

    International Nuclear Information System (INIS)

    Farmer, W.S.

    1983-01-01

    Electrical equipment qualification research programs being carried out by CEA, JAERI, and Sandia Laboratories are discussed. Objectives of the program are: (1) assessment of accident simulation methods for electrical equipment qualification testing; lower coarse (2) evaluation of equipment aging and accelerated aging methods; (3) determine radiation dose spectrum to electrical equipment and assess simulation methods for qualification; (4) identify inadequacies in electrical equipment qualification procedures and standards and potential failure modes; and (5) provide data for verifying and improving standards, rules and regulatory guides

  10. Space Heating Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

  11. Predicting Job Crafting From the Socially Embedded Perspective: The Interactive Effect of Job Autonomy, Social Skill, and Employee Status

    OpenAIRE

    Sekiguchi, Tomoki; Li, Jie; Hosomi, Masaki

    2017-01-01

    Job crafting represents the bottom-up process of change employees make in their work boundaries and plays an important role in the management of organizational change. Following the socially embedded perspective, we examine the roles of job autonomy, social skill, and employee status in predicting job crafting. Study 1 with a sample of 509 part-time employees found that job autonomy and social skill not only directly but also interactively influenced job crafting. Study 2 with a sample of 564...

  12. Effects of a job crafting intervention program on work engagement among Japanese employees: a pretest-posttest study

    OpenAIRE

    Sakuraya, Asuka; Shimazu, Akihito; Imamura, Kotaro; Namba, Katsuyuki; Kawakami, Norito

    2016-01-01

    Abstract Background Job crafting, an employee-initiated job design/redesign, has become important for employees’ well-being such as work engagement. This study examined the effectiveness of a newly developed job crafting intervention program on work engagement (as primary outcome), as well as job crafting and psychological distress (as secondary outcomes), using a pretest-posttest study design among Japanese employees. Methods Participants were managers of a private company and a private psyc...

  13. “Making our job hospitable” – Assessment of job-crafting behavior among dental academic faculty in South India

    Directory of Open Access Journals (Sweden)

    V Siva Kalyan

    2018-01-01

    Full Text Available Introduction: Employees are regularly offered opportunities to make their work more appealing and rewarding. These opportunities might be as simple as making fine changes to their daily tasks to boost happiness and to connect with more people at vocation. Hence, an attempt is made to assess job-crafting behavior among the dental academic faculty. Materials and Methods: A cross-sectional study was conducted among dental academic faculty from five dental colleges. Job Crafting Questionnaire (JCQ was used to assess the job-crafting behavior. Mean scores were calculated for different domains of JCQ. Gender differences were analyzed using Student's “t-” test and one-way ANOVA to test the difference between different academic positions of the faculty members. Results: A total of 228 dental faculty members with a mean age of 34.43 ± 6.13 years participated in the study. The mean value of job-crafting behavior was found to be highest among female faculty (60.07 ± 8.38 and professors (61.35 ± 8.30. Male faculty scored higher in task-crafting domain and female faculty scored higher in both cognitive- and relational-crafting domains. The professors scored highest in all the three domains of job-crafting behavior as compared to that of senior lecturers and readers. Conclusion: Job crafting is an effectual workplace intervention, where employees assume an active role in shaping their work experience to enhance their job satisfaction and well-being. The overall score of job-crafting behavior was found to be highest among both professors and female faculty members. Male faculty members scored higher in task-crafting domain. With regard to individual domains, the participants scored highest in cognitive crafting followed by task and relational crafting.

  14. Different types of employee well-being across time and their relationships with job crafting.

    Science.gov (United States)

    Hakanen, Jari J; Peeters, Maria C W; Schaufeli, Wilmar B

    2018-04-01

    We used and integrated the circumplex model of affect (Russell, 1980) and the conservation of resources theory (Hobfoll, 1998) to hypothesize how various types of employee well-being, which can be differentiated on theoretical grounds (i.e., work engagement, job satisfaction, burnout, and workaholism), may differently predict various job crafting behaviors (i.e., increasing structural and social resources and challenging demands, and decreasing hindering demands) and each other over time. At Time 1, we measured employee well-being, and 4 years later at Time 2, job crafting and well-being, using a large sample of Finnish dentists (N = 1,877). The results of structural equation modeling showed that (a) work engagement positively predicted both types of increasing resources and challenging demands and negatively predicted decreasing hindering demands; (b) workaholism positively predicted increasing structural resources and challenging demands; (c) burnout positively predicted decreasing hindering demands and negatively predicted increasing structural resources, whereas (d) job satisfaction did not relate to job crafting over time; and (e) work engagement positively influenced job satisfaction and negatively influenced burnout, whereas (f) workaholism predicted burnout after controlling for baseline levels. Thus, work engagement was a stronger predictor of future job crafting and other types of employee well-being than job satisfaction. Although workaholism was positively associated with job crafting, it also predicted burnout. We conclude that the relationship between job crafting and employee well-being may be more complex than assumed, because the way in which employees will craft their jobs in the future seems to depend on how they currently feel. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  15. Leader–member exchange fosters work engagement: The mediating role of job crafting

    Directory of Open Access Journals (Sweden)

    Mirjam Radstaak

    2017-09-01

    Full Text Available Orientation: The right balance between job demands and job resources are essential for employees to bring energy and enthusiasm to work. Employees who experience high-quality relationships with their supervisors may actively craft their job demands and job resources and feel more engaged. Research purpose: The current study examined the associations between leader–member exchange (LMX, job crafting and work engagement. Motivation: This study attempts to gain more insight in the associations between LMX, job crafting and work engagement. It was hypothesised that high-quality relationships with supervisors fosters work engagement because it stimulates employees to craft their jobs by increasing social and structural job resources and challenging job demands and by decreasing hindering job demands. Research approach, design and methodology: Participants (N = 402 working for a leading mail and parcels company in the Netherlands completed questionnaires measuring LMX, work engagement and job crafting. Structural equation modelling was used to examine the hypotheses. Main findings: Increasing social job resources (β = 0.01, SE = 0.00, p < 0.001 and increasing challenging job demands (β = 0.08, SE = 0.04, p < 0.05 were significant mediators in the association between LMX and work engagement. Increasing structural job resources (β = 0.00, SE = 0.00, p = 0.92 and decreasing hindering job demands (β = -0.00, SE 0.00, p = 0.09 were not significant mediators. Practical and managerial implications: Supervisors who are capable of building high-quality relationships with their employees based on trust, respect and loyalty will foster a positive, fulfilling work-related state of mind among employees because they are more willing to proactively craft a challenging and resourceful work environment. Contribution or value-add: The findings of this study showed the importance of high-quality relationships with supervisors and were unique in examining the

  16. Renewal of radiological equipment.

    Science.gov (United States)

    2014-10-01

    In this century, medical imaging is at the heart of medical practice. Besides providing fast and accurate diagnosis, advances in radiology equipment offer new and previously non-existing options for treatment guidance with quite low morbidity, resulting in the improvement of health outcomes and quality of life for the patients. Although rapid technological development created new medical imaging modalities and methods, the same progress speed resulted in accelerated technical and functional obsolescence of the same medical imaging equipment, consequently creating a need for renewal. Older equipment has a high risk of failures and breakdowns, which might cause delays in diagnosis and treatment of the patient, and safety problems both for the patient and the medical staff. The European Society of Radiology is promoting the use of up-to-date equipment, especially in the context of the EuroSafe Imaging Campaign, as the use of up-to-date equipment will improve quality and safety in medical imaging. Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or renewal. This plan should look forward a minimum of 5 years, with annual updates. Teaching points • Radiological equipment has a definite life cycle span, resulting in unavoidable breakdown and decrease or loss of image quality which renders equipment useless after a certain time period.• Equipment older than 10 years is no longer state-of-the art equipment and replacement is essential. Operating costs of older equipment will be high when compared with new equipment, and sometimes maintenance will be impossible if no spare parts are available.• Older equipment has a high risk of failure and breakdown, causing delays in diagnosis and treatment of the patient and safety problems both for the patient and the medical staff.• Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or replacement. This plan should look forward a

  17. Crafting an International Study of Students' Conceptual Understanding of Astronomy

    Science.gov (United States)

    Slater, Stephanie; Bretones, P. S.; McKinnon, D.; Schleigh, S.; Slater, T. F.; Astronomy, Center; Education Research, Physics

    2013-01-01

    Large international investigations into the learning of science, such as the TIMSS and PISA studies, have been enlightening with regard to effective instructional practices. Data from these studies revealed weaknesses and promising practices within nations' educational systems, with evidence to suggest that these studies have led to international reforms in science education. However, these reforms have focused on the general characteristics of teaching and learning across all sciences. While extraordinarily useful, these studies have provided limited insight for any given content domain. To date, there has been no systematic effort to measure individual's conceptual astronomy understanding across the globe. This paper describes our motivations for a coordinated, multinational study of astronomy understanding. First, reformed education is based upon knowing the preexisting knowledge state of our students. The data from this study will be used to assist international astronomy education and public outreach (EPO) professionals in their efforts to improve practices across global settings. Second, while the US astronomy EPO community has a long history of activity, research has established that many practices are ineffective in the face of robust misconceptions (e.g.: seasons). Within an international sample we hope to find subpopulations that do not conform to our existing knowledge of student misconceptions, leading us to cultural or educational practices that hint at alternative, effective means of instruction. Finally, it is our hope that this first venture into large-scale disciplinary collaboration will help us to craft a set of common languages and practices, building capacity and leading toward long-term cooperation across the international EPO community. This project is sponsored and managed by the Center for Astronomy & Physics Education Research (CAPER), in collaboration with members of the International Astronomical Union-Commission 46. We are actively

  18. Halophila stipulacea: survival under adverse conditions.

    Science.gov (United States)

    Morton, C. R., Jr.; Primack, A. G.; Wyllie-Echeverria, S.

    2016-02-01

    Halophila stipulacea is an invasive seagrass species originally native to the Indian Ocean. It invaded the Mediterranean Sea shortly after the opening of the Suez Canal, and has recently been found in the Caribbean. It has been suggested that it arrived in the Mediterranean attached to small pleasure craft, fishing craft, or small cargo vessels. This research examines the feasibility of these methods of transport and the possibility that arrived transported by ocean currents. To investigate potential transport vectors, we collected rooted samples of H. stipulacae from Brewers Bay on the island of Saint Thomas, USVI, and exposed them to conditions that would be experienced under each alternative method of transport. The health of the samples was monitored using a FLOURPEN FP 100 portable fluorometer. Rhizomes, and associated leaf pairs declined rapidly when exposed to air, submersed in freshwater, or kept damp in a towel soaked in seawater, but survived for more than 5 weeks when left floating in a bucket submersed in a seawater tank. Water temperature ranged between 27C and 30C during the experiment. This suggests that it might be possible for H. stipulacae to cross the Atlantic aided by currents.

  19. Job crafting and its impact on work engagement and job satisfaction in mining and manufacturing

    Directory of Open Access Journals (Sweden)

    Leon T de Beer

    2016-09-01

    Full Text Available The purpose of this study was to investigate job crafting and its relationship with work engagement and job satisfaction within the South African context. This research is important as job crafting has been shown to have a positive influence on employee motivation. A cross-sectional survey design was used to collect primary data from organisations in the mining and manufacturing industries of South Africa (N = 470. The results of multi-group structural equation modelling showed that the original four-factor structure of the job crafting scale was supported by the data, but that a three-factor structure was necessary due to a discriminant validity concern regarding two job crafting dimensions. Regression results revealed that increasing structural job resources with challenging job demands, and increasing social job resources were significant predictors of work engagement in both groups. Contrary to expectations decreasing hindering job demands was a negative predictor of job satisfaction in the mining group. Furthermore, increasing social job resources was also a significant predictor of job satisfaction in both groups. This study indicates the importance of job crafting for work engagement and job satisfaction in organisations.

  20. Alternative theoretical and methodological approaches for exploring higher education in Art and Crafts

    Directory of Open Access Journals (Sweden)

    Marte Sørebø Gulliksen

    2009-12-01

    Full Text Available This article presents and discusses approaches for exploring higher education in Art and Crafts. The concepts exploring versus research and the different foci in an insider perspective versus an outsider perspective introduces the theme. An insider perspective is said to be a useful starting point for inquiry, referring to Frayling’s trichotomy research into, research on and research through from 1993. The field of higher education in Art and Crafts education is shortly presented as comprising two main areas of knowledge: knowledge of education, and knowledge about the different subject areas within Art and Crafts. Both theory and practice are a part of these areas of knowledge. As higher education in Art and Crafts is a making profession, the most prominent challenge when exploring this today is thus said to be to develop research based knowledge on Education in Art and Crafts as a making discipline.  Two keywords are deemed to be useful in approaching this theme: Mode 2 knowledge production and transdisciplinarity. The article concludes with describing specific ways of doing this today from within the context of application. Two examples of large research projects in Scandinavia are presented as examples of such projects.

  1. RETRIEVAL EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    J. Steinhoff

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

  2. Medical equipment management

    CERN Document Server

    Willson, Keith; Tabakov, Slavik

    2013-01-01

    Know What to Expect When Managing Medical Equipment and Healthcare Technology in Your Organization As medical technology in clinical care becomes more complex, clinical professionals and support staff must know how to keep patients safe and equipment working in the clinical environment. Accessible to all healthcare professionals and managers, Medical Equipment Management presents an integrated approach to managing medical equipment in healthcare organizations. The book explains the underlying principles and requirements and raises awareness of what needs to be done and what questions to ask. I

  3. Data communication equipment

    International Nuclear Information System (INIS)

    Kim, Hak Seon; Lee, Sang Mok

    1998-02-01

    The contents of this book are introduction of data communication on definition, purpose and history, information terminal about data communication system and data transmission system, data transmit equipment of summary, transmission cable, data port, concentrator and front-end processor, audio communication equipment like phones, radio communication equipment of summary on foundation of electromagnetic waves, AM transmitter, AM receiver, FM receiver and FM transmitter, a satellite and mobile communication equipment such as earth station, TT and C and Cellular phone, video telephone and new media apparatus.

  4. Waterway Equipment - Boat, Barge, Motor

    Science.gov (United States)

    2012-09-25

    Equation 3 LCG = (Dfwd * Wfwd) + ( Daft * Waft) / W Equation 4 where: Wfwd = sum of weights from forward scales Waft = sum of weights from...aft scales W = Wfwd + Waft = weight of craft as inclined Dfwd = longitudinal distance of forward scales from the reference point Daft

  5. Continual Online Evolutionary Planning for In-Game Build Order Adaptation in StarCraft

    DEFF Research Database (Denmark)

    Justesen, Niels Orsleff; Risi, Sebastian

    2017-01-01

    able to switch between predefined strategies, which makes it hard to adapt to new situations. This paper introduces an evolutionary-based method to overcome this challenge, called Continual Online Evolutionary Planning (COEP), which is able to perform in-game adaptive build-order planning. COEP......The real-time strategy game StarCraft has become an important benchmark for AI research as it poses a complex environment with numerous challenges. An important strategic aspect in this game is to decide what buildings and units to produce. StarCraft bots playing in AI competitions today are only...... was added to an open source StarCraft bot called UAlbertaBot and is able to outperform the built-in bots in the game as well as being competitive against a number of scripted opening strategies. The COEP augmented bot can change its build order dynamically and quickly adapt to the opponent’s strategy....

  6. Poly(vinyl chloride-grafted multi-walled carbon nanotubes via Friedel-Crafts alkylation

    Directory of Open Access Journals (Sweden)

    2010-11-01

    Full Text Available A novel approach was developed for the surface modification of the multi-walled carbon nanotubes (MWCNTs with high percentage of grafting (PG% by the grafting of polymer via the Friedel-Crafts alkylation. The graft reaction conditions, such as the amount of catalyst added, the reaction temperature, and the reaction time were optimized for the Friedel-Crafts alkylation of the MWCNTs with poly(vinyl chloride (PVC with anhydrous aluminum chloride (AlCl3 as catalyst in chloroform (CHCl3. The Fourier Transform Infrared (FT-IR, Raman, and thermogravimetric (TGA analysis showed that PVC had been successfully grafted onto MWCNTs both at the ends and on the sidewalls by the proposed Friedel-Crafts alkylation. The PVC grafted MWCNTs (PVC-MWCNTs could be dispersed well in organic solvent and the dispersion was more stable.

  7. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...

  8. Capital Equipment Replacement Decisions

    OpenAIRE

    Batterham, Robert L.; Fraser, K.I.

    1995-01-01

    This paper reviews the literature on the optimal replacement of capital equipment, especially farm machinery. It also considers the influence of taxation and capital rationing on replacement decisions. It concludes that special taxation provisions such as accelerated depreciation and investment allowances are unlikely to greatly influence farmers' capital equipment replacement decisions in Australia.

  9. How Valuable is a Well-Crafted Design and Name Brand?

    DEFF Research Database (Denmark)

    Kristensen, Tore; Gabrielsen, Gorm; Zaichkowsky, Judith

    2012-01-01

    Preferences for similarly designed consumer products, evaluated blind and branded and also with and without prices, were tested in a consumer setting. The consumer's perceptual experience led to preference of the well-crafted high-priced option. This preference was enhanced by priming consumers w...... of choices using measures of inherent design acumen, prior experience, and purchasing behavior were largely unsuccessful.......Preferences for similarly designed consumer products, evaluated blind and branded and also with and without prices, were tested in a consumer setting. The consumer's perceptual experience led to preference of the well-crafted high-priced option. This preference was enhanced by priming consumers...

  10. Two-craft Coulomb formation study about circular orbits and libration points

    Science.gov (United States)

    Inampudi, Ravi Kishore

    This dissertation investigates the dynamics and control of a two-craft Coulomb formation in circular orbits and at libration points; it addresses relative equilibria, stability and optimal reconfigurations of such formations. The relative equilibria of a two-craft tether formation connected by line-of-sight elastic forces moving in circular orbits and at libration points are investigated. In circular Earth orbits and Earth-Moon libration points, the radial, along-track, and orbit normal great circle equilibria conditions are found. An example of modeling the tether force using Coulomb force is discussed. Furthermore, the non-great-circle equilibria conditions for a two-spacecraft tether structure in circular Earth orbit and at collinear libration points are developed. Then the linearized dynamics and stability analysis of a 2-craft Coulomb formation at Earth-Moon libration points are studied. For orbit-radial equilibrium, Coulomb forces control the relative distance between the two satellites. The gravity gradient torques on the formation due to the two planets help stabilize the formation. Similar analysis is performed for along-track and orbit-normal relative equilibrium configurations. Where necessary, the craft use a hybrid thrusting-electrostatic actuation system. The two-craft dynamics at the libration points provide a general framework with circular Earth orbit dynamics forming a special case. In the presence of differential solar drag perturbations, a Lyapunov feedback controller is designed to stabilize a radial equilibrium, two-craft Coulomb formation at collinear libration points. The second part of the thesis investigates optimal reconfigurations of two-craft Coulomb formations in circular Earth orbits by applying nonlinear optimal control techniques. The objective of these reconfigurations is to maneuver the two-craft formation between two charged equilibria configurations. The reconfiguration of spacecraft is posed as an optimization problem using the

  11. Craft villages and tourism development, a case study in Phu Quoc island of Vietnam

    Directory of Open Access Journals (Sweden)

    Hieu Vu Minh

    2017-05-01

    Full Text Available Craft tourism is attracting many domestic and foreign tourists. In recent years in Vietnam, craft villages have exploited their potentials in tourism industry. For many different causes, tourism activities have yet reached expectations and their potentials for tourism development. This paper is to review their currents, tourism potentials and limitations and then formulate recommendations to the tourism development in Phu Quoc island. The data for this paper are from two sources. Secondary data were collected from the vast literature and journals. Primary data were from interviews with village owners, related authorities, tourists, tourism corporate, etc. and results serve as guidelines to develop the tourism industry and management.

  12. 78 FR 52872 - Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft...

    Science.gov (United States)

    2013-08-27

    ... Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier... certain 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild... send any written relevant data, views, or arguments about this proposed AD. Send your comments to an...

  13. Regular versus cutback-related change: the role of employee job crafting in organizational change contexts of different nature

    NARCIS (Netherlands)

    Petrou, P.; Demerouti, E.; Xanthopoulou, D.

    2017-01-01

    The present study addresses how job characteristics (e.g., autonomy, workload, and their interaction) relate to employee job crafting (i.e., seeking resources, seeking challenges, and reducing demands), and whether job crafting relates to employee work-related well-being (i.e., work engagement and

  14. Synthesis of 1-indanones through the intramolecular Friedel-Crafts acylation reaction using NbCl5 as Lewis acid

    International Nuclear Information System (INIS)

    Polo, Ellen Christine; Silva-Filho, Luiz Carlos da; Silva, Gil Valdo Jose da; Constantino, Mauricio Gomes

    2008-01-01

    The intramolecular Friedel-Crafts acylation reaction of 3-arylpropanoic acids to give 1-indanones can be effected in good yields under mild conditions (room temperature) by using niobium pentachloride. Our results indicate that NbCl 5 acts both as reagent (to transform carboxylic acids into acyl chlorides) and as catalyst in the Friedel-Crafts cyclization. (author)

  15. The influence of future time perspective on work engagement and job performance: the role of job crafting.

    NARCIS (Netherlands)

    Kooij, T.A.M.; Tims,; Akkermans,

    2017-01-01

    This two-wave study aimed to examine future time perspective (FTP) as an antecedent of job crafting, and in turn job crafting as a mediator in associations between FTP and work outcomes. Based on the lifespan socio-emotional selectivity theory, we expected that open-ended and limited FTP would evoke

  16. Primary student teachers’ perceptions of their prior experiences with craft-making in light of Hannah Arendt’s human condition

    Directory of Open Access Journals (Sweden)

    Seija Karppinen

    2013-09-01

    Full Text Available This article presents the results of a study about student teachers’ feelings toward craft-making and teaching crafts. As a teacher educator in teacher training, my interest lies first in student teachers’ prior craft experiences and in their prejudices about themselves as craft-makers in relation to the human condition as set forth by philosopher Hannah Arendt (1958/2002. Second, I am interested in how students’ experiences and their image of crafts affect their attitude to crafts and teaching crafts. The study uses qualitative content analysis (e.g. Cohen, Manion & Morrison, 2007, concept clarification (e.g. Kramer, 1993; Burkin, 2011 and thought experiments (Zalta, 2011; Cohnitz, 2006; Sorensen, 1992 to identify and categorise student teachers’ emotional experiences. The data consist of essays (craft biographies, N=144 by first-year student teachers which were written in 2008 and 2009 during a basic course in crafts as part of teacher education at the University of Helsinki. Arendt (1958/2002 labelled the elements of the human condition as labour, work and action. In this study I discuss how, for instance, Arendtian concepts could be explained in relation to crafts, craft-making and education. Arendt categorises craft, defined as things made by hand, as part of the concept of work. In this study, I consider whether crafts and craft-making could be part of other Arendtian terms as well and how these terms fit various educational situations. As a result, there is a need for additional terms alongside Arendtian terms to describe multifaceted craft-making and primary student teachers’ perceptions of themselves as craft-makers. In relation to student teachers’ memories on primary school crafts, I have labelled Arendtian concept labour as students’ credit-orientated activity, the concept of work as making-orientated activity and the concept of action as interaction-orientated activity. These three orientations of craft frame student

  17. HVAC systems and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, S.T. (Linford Air and Refrigeration Company, Oakland, CA (US))

    1990-02-01

    The author discusses the section of the ASHRAE Standard 90.1-1989 which addresses HVAC systems and equipment. New features of HVAC systems mandatory general requirements are described. New prescriptive requirements are detailed.

  18. Personal Protective Equipment

    National Research Council Canada - National Science Library

    1998-01-01

    ... of personal protective equipment A safety program for new employees is a necessary part of any orientation program An on-going safety program should be used to motivate employees to continue to use...

  19. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  20. CV equipment responsibilities

    CERN Document Server

    Pirollet, B

    2008-01-01

    This document describes the limits of the responsibilities of the TS/CV for fire fighting equipment at the LHC. The various interfaces, providers and users of the water supply systems and clean water raising systems are described.

  1. Equipment for hydraulic testing

    International Nuclear Information System (INIS)

    Jacobsson, L.; Norlander, H.

    1981-07-01

    Hydraulic testing in boreholes is one major task of the hydrogeological program in the Stripa Project. A new testing equipment for this purpose was constructed. It consists of a downhole part and a surface part. The downhole part consists of two packers enclosing two test-sections when inflated; one between the packers and one between the bottom packer and the bottom of the borehole. A probe for downhole electronics is also included in the downhole equipment together with electrical cable and nylon tubing. In order to perform shut-in and pulse tests with high accuracy a surface controlled downhole valve was constructed. The surface equipment consists of the data acquisition system, transducer amplifier and surface gauges. In the report detailed descriptions of each component in the whole testing equipment are given. (Auth.)

  2. Scholarisation, Apprenticeship and Social Differentiation. Analysis of the Non-Industrial Craft Sector in Morocco

    Science.gov (United States)

    Gerard, Etienne

    2012-01-01

    The article approaches the question of the schooling processes in the particular environment of the Moroccan craftsmen of Fez. It shows that the weak schooling of the children is bound to the representations and to the ways of transmission of craft industry knowledge. Schooling is, indeed, the object of tensions between a school system of western…

  3. Trait-level and week-level regulatory focus as a motivation to craft a job

    NARCIS (Netherlands)

    Petrou, P.; Demerouti, E.

    2015-01-01

    Purpose – The purpose of this paper is to address regulatory focus (promotion vs prevention) as a trait-level variable and a week-level variable linked to employee job crafting behaviors (i.e. seeking resources, seeking challenges and reducing demands). The authors hypothesized that while promotion

  4. Automatic Observer Script for StarCraft: Brood War Bot Games (technical report)

    OpenAIRE

    Mattsson, Björn Persson; Vajda, Tomáš; Čertický, Michal

    2015-01-01

    This short report describes an automated BWAPI-based script developed for live streams of a StarCraft Brood War bot tournament, SSCAIT. The script controls the in-game camera in order to follow the relevant events and improve the viewer experience. We enumerate its novel features and provide a few implementation notes.

  5. Fatigue resistance of welded joints in aluminium high-speed craft : A total stress concept

    NARCIS (Netherlands)

    Den Besten, J.H.

    2015-01-01

    Crew transfers, surveillance duties and {security, rescue, interception} operations at sea typically require high-speed craft. Aluminium is quite often selected as hull structure material because of its weight save potential in comparison to steel. The fatigue strength, however, may become a point

  6. The river and the people. An approach to memories, craft and adult education

    Directory of Open Access Journals (Sweden)

    Emilio Lucio-Villegas

    2018-04-01

    Full Text Available The main aim of this article is to describe an ongoing study to recover the memories of the people and the traditional crafts associated with the Guadalquivir River where it passes through a town called C., 12km from the city of S. in the south of Spain. It seems that people are losing their sense of belonging to both a symbolic and geographical territory. The process for recovering it can be considered a generator of experiences and learning. These experiences are related to identity as an element which enables people to understand how individuals establish relationships amongst themselves and with the environment. The paper describes the process of research based on interviewing people to capture their experiences. This is a work in process. The first outcomes are related to a number of descriptive categories such as: the crafts associated with the River; the use of the River to transport goods and people; the family ties associated with the crafts; the cosmopolitanism of the people and the changes ensuing from it; the role of women; and the River as a magical and mysterious place. Preliminary conclusions call on us to consider the importance of recovering traditional crafts as a source of adult education, and of maintaining a cultural identity threatened by globalisation processes.

  7. Traditional Craft or Technology Education: Development of Students' Technical Abilities in Finnish Comprehensive School

    Science.gov (United States)

    Autio, Ossi

    2016-01-01

    Changes in the economy, nature, production and society together with increasing scientific and technological knowledge make demands of transforming school teaching in the field of technology education. The aim of the article is briefly to explore the integration between science, technology and traditional craft education by analyzing the current…

  8. 25 CFR 141.27 - Trade in imitation Indian crafts prohibited.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Trade in imitation Indian crafts prohibited. 141.27 Section 141.27 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES BUSINESS PRACTICES ON THE NAVAJO, HOPI AND ZUNI RESERVATIONS General Business Practices § 141.27 Trade in imitation...

  9. Job crafting and performance of Dutch and American health care professionals

    NARCIS (Netherlands)

    Gordon, H.J.; Demerouti, E.; Le Blanc, P.M.; Bipp, T.

    2015-01-01

    We explore how job demands and job resources are related to job crafting, and how this, in turn, is related to performance in two samples of American (US; N = 70) and Dutch (NL; N = 144) health care professionals (HCP). A cross-sectional, cross-cultural design revealed that US HCP have higher job

  10. The Functions and Benefits of the ePortfolio in Craft Education at the Primary Level

    Science.gov (United States)

    Saarinen, Auli; Seitamaa-Hakkarainen, Pirita; Hakkarainen, Kai

    2016-01-01

    The authors investigated primary school pupils' experiences using an electronic portfolio in their craft education for a three year period, from the 3rd grade until the end of the 5th grade. This article emphasizes the functions and the benefits of the ePortfolio method and outlines general user experiences based on pupil interviews (N = 38),…

  11. Developing Community Reinforcement and Family Training (CRAFT) for Parents of Treatment-Resistant Adolescents

    Science.gov (United States)

    Kirby, Kimberly C.; Versek, Brian; Kerwin, MaryLouise E.; Meyers, Kathleen; Benishek, Lois A.; Bresani, Elena; Washio, Yukiko; Arria, Amelia; Meyers, Robert J.

    2015-01-01

    We describe a project focused on training parents to facilitate their treatment-resistant adolescent's treatment entry and to manage their child after entry into community-based treatment. Controlled studies show that Community Reinforcement and Family Training (CRAFT) is a unilateral treatment that fosters treatment entry of adults; however,…

  12. The Teachers' Views on the Significance of the Design and Craft Teaching in Finland

    Science.gov (United States)

    Ronkko, Marja-Leena; Mommo, Sanna; Aerila, Juli-Anna

    2016-01-01

    The Finnish curriculum for crafts emphasises the creative problem-solving skills of the student, the completion of different design tasks and the implementation of designs, while seeking to nurture the student's self-esteem. Furthermore, students should draw up the designs for their artefacts, plan their work, and also develop designs when needed.…

  13. Effects of spent craft brewers’ yeast on fermentation and methane production by rumen microorganisms

    Science.gov (United States)

    Saccharomyces cerevisiae is a key component of beer brewing and a major by-product. The leftover, spent brewers’ yeast, from large breweries has been used for some time as a protein supplement in cattle, however the possible advantages of spent yeast from smaller craft breweries, containing much hig...

  14. Investigation of crafting polymerization of acrylic acid to cellulose materials under the action of accelerated electrons

    International Nuclear Information System (INIS)

    Valiev, A.; Bazhenov, L.G.; Asamov, M.K.; Sagatov, Eh.A.

    1996-01-01

    Crafting polymerization of acrylic acid (AA) to cellulose materials in the presence of copper, zinc and silver salts under the action of accelerated electrons has been investigated with the aim to attach anti microbe properties to these materials. (author). 2 refs., 1 tab

  15. Degradation of spent craft brewer’s yeast by caprine rumen hyper ammonia-producing bacteria

    Science.gov (United States)

    Spent brewer’s yeast has long been included in ruminant diets as a protein supplement. However, modern craft beers often include more hops (Humulus lupulus L.) compounds than traditional recipes. These compounds include alpha and beta-acids, which are antimicrobial to the rumen hyper ammonia-produci...

  16. Friedel-Crafts Alkylation Using Elemental Aluminum Catalyst: An Undergraduate Laboratory Experiment.

    Science.gov (United States)

    Meeks, B. Spencer; Lucas, Anita R.

    1989-01-01

    Provides methodology for carrying out the synthesis of sec-butyltoluene by the Friedel-Crafts alkylation of toluene. Suggests using simple elemental aluminum as the catalyst in place of AlCl3 or amalgamated aluminum. Notes satisfactory results for both macro- and microscale operations. (MVL)

  17. ePerformance: Crafting, Rehearsing, and Presenting the ePortfolio Persona

    Science.gov (United States)

    Ramírez, Kimberly

    2011-01-01

    "ePerformance: Crafting, Rehearsing, and Presenting the ePortfolio Persona" exposes vital intersections between pedagogy and performance to reveal how using ePortfolio encourages not only student-centered learning, but facilitates collaboration through cooperative exchanges. Productive interactivity with audiences who actively influence…

  18. New technologies for fire suppression on board naval craft, FiST

    NARCIS (Netherlands)

    Rahm, M.; Hiltz, J.; Wal, R. van der; Hertzberg, T.; Lindström, J.

    2014-01-01

    For three years Canada, Sweden and the Netherlands have been investigating new technologies for fire suppression on board naval crafts within the FiST project. The project has focused on a number of technologies. These included the evaluation of water based fire suppression systems and in particular

  19. Critical Success Factors in Crafting Strategic Architecture for E-Learning at HP University

    Science.gov (United States)

    Sharma, Kunal; Pandit, Pallvi; Pandit, Parul

    2011-01-01

    Purpose: The purpose of this paper is to outline the critical success factors for crafting a strategic architecture for e-learning at HP University. Design/methodology/approach: A descriptive survey type of research design was used. An empirical study was conducted on students enrolled with the International Centre for Distance and Open Learning…

  20. Proactive personality and job performance: the role of job crafting and work engagement

    NARCIS (Netherlands)

    Bakker, A.B.; Tims, M.; Derks, D.

    2012-01-01

    The article examines the role of proactive personality in predicting work engagement and job performance. On the basis of the literature on proactive personality and the job demands-resources model, we hypothesized that employees with a proactive personality would be most likely to craft their own

  1. Pi-activated alcohols: an emerging class of alkylating agents for catalytic Friedel-Crafts reactions.

    Science.gov (United States)

    Bandini, Marco; Tragni, Michele

    2009-04-21

    The direct functionalization of aromatic compounds, via Friedel-Crafts alkylation reactions with alcohols, is one of the cornerstones in organic chemistry. The present emerging area deals with the recent advances in the use of pi-activated alcohols in the catalytic and stereoselective construction of benzylic stereocenters.

  2. Job crafting in changing organizations: Antecedents and implications for exhaustion and performance.

    Science.gov (United States)

    Petrou, Paraskevas; Demerouti, Evangelia; Schaufeli, Wilmar B

    2015-10-01

    The present study addressed employee job crafting behaviors (i.e., seeking resources, seeking challenges, and reducing demands) in the context of organizational change. We examined predictors of job crafting both at the organizational level (i.e., perceived impact of the implemented changes on the working life of employees) and the individual level (i.e., employee willingness to follow the changes). Job crafting behaviors were expected to predict task performance and exhaustion. Two-wave longitudinal data from 580 police officers undergoing organizational changes were analyzed with structural equation modeling. Findings showed that the degree to which changes influence employees' daily work was linked to reducing demands and exhaustion, whereas employee willingness to change was linked to seeking resources and seeking challenges. Furthermore, while seeking resources and seeking challenges were associated with high task performance and low exhaustion respectively, reducing demands seemed to predict exhaustion positively. Our findings suggest that job crafting can act as a strategy of employees to respond to organizational change. While seeking resources and seeking challenges enhance employee adjustment and should be encouraged by managers, reducing demands seems to have unfavorable implications for employees. (c) 2015 APA, all rights reserved).

  3. An Empirical Study of the Process of Crafting and Using Definitions

    Science.gov (United States)

    Little, Angela Jean

    2013-01-01

    In this dissertation I analyze the process of crafting definitions whose purpose is classification. The context I examine is undergraduate upper-division physical science majors defining and naming sub-categories of a physical phenomenon in the context of a design task over an extended period of time. The goal of the design task is one of…

  4. 3D DIGITAL SIMULATION OF MINNAN TEMPLE ARCHITECTURE CAISSON'S CRAFT TECHNIQUES

    Directory of Open Access Journals (Sweden)

    Y. C. Lin

    2013-07-01

    Full Text Available Caisson is one of the important representations of the Minnan (southern Fujian temple architecture craft techniques and decorative aesthetics. The special component design and group building method present the architectural thinking and personal characteristics of great carpenters of Minnan temple architecture. In late Qing Dynasty, the appearance and style of caissons of famous temples in Taiwan apparently presented the building techniques of the great carpenters. However, as the years went by, the caisson design and craft techniques were not fully inherited, which has been a great loss of cultural assets. Accordingly, with the caisson of Fulong temple, a work by the well-known great carpenter in Tainan as an example, this study obtained the thinking principles of the original design and the design method at initial period of construction through interview records and the step of redrawing the "Tng-Ko" (traditional design, stakeout and construction tool. We obtained the 3D point cloud model of the caisson of Fulong temple using 3D laser scanning technology, and established the 3D digital model of each component of the caisson. Based on the caisson component procedure obtained from interview records, this study conducted the digital simulation of the caisson component to completely recode and present the caisson design, construction and completion procedure. This model of preserving the craft techniques for Minnan temple caisson by using digital technology makes specific contribution to the heritage of the craft techniques while providing an important reference for the digital preservation of human cultural assets.

  5. Emotions in Risk Assessment and Decision Making Processes During Craft Practice

    Directory of Open Access Journals (Sweden)

    Camilla Groth

    2015-12-01

    Full Text Available Traditionally subjective experiences and emotions have been overlooked in the practice of scientific research. In the field of design and craft research too, feelings and emotions have been considered as interfering with the rigour of research. However, as a result of findings in neuroscience, a new understanding has emerged, providing emotions a central role in risk assessment and decision making processes. This has implications also for how we understand craft practice. In this practice-led research, a craft practitioner analysed five video-recordings of herself while throwing clay blindfolded. The researcher-practitioner specifically studied critical incidents in the throwing process and made a detailed analysis of how sensory experiences and emotions guided her in risk assessment, decision making, and problem solving during the clay-throwing sessions. She found that her tactile experience gave her important clues on the condition of the material and its consequent possibilities at different stages. These experiences in turn affected her emotions in either positive or negative ways, affecting her risk assessment, decision making, and problem solving activities. This research has shown that sensory experiences and emotions influence the craft making process and are thus important elements in the expertise of the craftsperson. The role of such emotions remains to be studied further in the expertise of researchers in general.

  6. Native American Arts and Crafts of the United States. Bibliography 1.

    Science.gov (United States)

    Indian Arts and Crafts Board, Washington, DC.

    The selected readings listed in this annotated bibliography are suggested as an introduction to the varied arts and crafts created from prehistoric to modern times by Native American peoples of the United States. The publications are organized by culture area to encompass major media practiced by Native American artists and craftsmen of these…

  7. Job crafting and extra-role behavior : the role of work engagement and flourishing

    NARCIS (Netherlands)

    Demerouti, E.; Bakker, A.B.; Gevers, J.M.P.

    2015-01-01

    This study investigates whether crafting of job demands and resources relates positively to extra-role behavior (i.e. contextual performance and creativity) through work engagement and flourishing. We collected data from 294 employees and their supervisors regarding employees' contextual performance

  8. A Resource Guide on Indian Arts and Crafts for Elementary and Secondary Teachers.

    Science.gov (United States)

    Fagot, Madeleine

    American Indian arts and crafts reference materials (published 1923-1973) are listed in this annotated resource guide for elementary and secondary school teachers. Approximately 260 listings are given for: books, films and filmstrips, maps and charts, picture sets, magazines, bibliographies and indexes, slide kits, transparencies, distributor's…

  9. High Job Demands, Still Engaged and Not Burned Out? The Role of Job Crafting

    NARCIS (Netherlands)

    Hakanen, Jari J.; Seppälä, Piia; Peeters, Maria C W

    2017-01-01

    Purpose: Traditionally, employee well-being has been considered as resulting from decent working conditions arranged by the organization. Much less is known about whether employees themselves can make self-initiated changes to their work, i.e., craft their jobs, in order to stay well, even in highly

  10. Craft Arts and Tourism in Ceramic Art Village of Kasongan in Yogyakarta

    Directory of Open Access Journals (Sweden)

    sp gustami

    2014-03-01

    Full Text Available Yogyakarta is one of Indonesia’s major tourist destinations. This is due to its nature, interesting, unique and fantastic ancient cultural and art sites. Creative industries and the ceramic crafts play an important role in the development of tourism in Yogyakarta. In this paper, ethnographic approach is used to describe the creative process and the ceramic crafts industry in the village of Kasongan, Yogyakarta. Based on the results of the field research, the authors conclude that the ceramic crafts tourist village of Kasongan is moving toward greater commoditization whereby the ceramics centre is now more oriented towards meeting the needs of tourist industry in Yogyakarta. Due to extensive interaction and the positive response from the general public, ceramic crafts practitioners of Kasongan experience unique and characteristic creative period. The crafters manage to negotiate between the old and the new values, in the village one can find both traditional pottery and new, creative and innovative ceramic products of export quality. Today, Kasongan is a trade mark ceramic tourism village that is entering the global era.

  11. Career competencies and job crafting: How proactive employees influence their well-being

    NARCIS (Netherlands)

    Plomp, J.; Tims, M.; Akkermans, J.; Khapova, S.N.; Jansen, P.G.W.; Bakker, A.B.

    2016-01-01

    Purpose: The purpose of this paper is to bring together job design and career theory in the examination of how proactive employees optimize their well-being (i.e. job satisfaction and perceived health) through job crafting and career competencies. This study offers an integrated account of the

  12. Surviving Sengstaken.

    Science.gov (United States)

    Jayakumar, S; Odulaja, A; Patel, S; Davenport, M; Ade-Ajayi, N

    2015-07-01

    To report the outcomes of children who underwent Sengstaken-Blakemore tube (SBT) insertion for life-threatening haemetemesis. Single institution retrospective review (1997-2012) of children managed with SBT insertion. Patient demographics, diagnosis and outcomes were noted. Data are expressed as median (range). 19 children [10 male, age 1 (0.4-16) yr] were identified; 18 had gastro-oesophageal varices and 1 aorto-oesophageal fistula. Varices were secondary to: biliary atresia (n=8), portal vein thrombosis (n=5), alpha-1-anti-trypsin deficiency (n=1), cystic fibrosis (n=1), intrahepatic cholestasis (n=1), sclerosing cholangitis (n=1) and nodular hyperplasia with arterio-portal shunt (n=1). Three children deteriorated rapidly and did not survive to have post-SBT endoscopy. The child with an aortooesophageal fistula underwent aortic stent insertion and subsequently oesophageal replacement. Complications included gastric mucosal ulceration (n=3, 16%), pressure necrosis at lips and cheeks (n=6, 31%) and SBT dislodgment (n=1, 6%). Six (31%) children died. The remaining 13 have been followed up for 62 (2-165) months; five required liver transplantation, two underwent a mesocaval shunt procedure and 6 have completed endoscopic variceal obliteration and are under surveillance. SBT can be an effective, albeit temporary, life-saving manoeuvre in children with catastrophic haematemesis. Copyright © 2015 Elsevier Inc. All rights reserved.

  13. Mycotoxin profiling of 1000 beer samples with a special focus on craft beer.

    Science.gov (United States)

    Peters, Jeroen; van Dam, Ruud; van Doorn, Ronald; Katerere, David; Berthiller, Franz; Haasnoot, Willem; Nielen, Michel W F

    2017-01-01

    Currently beer is booming, mainly due to the steady rise of craft breweries worldwide. Previous surveys for occurrence of mycotoxins in beer, were mainly focussed on industrial produced beer. The present survey reports the presence of mycotoxins in craft beer and how this compares to industrial produced beer. More than 1000 beers were collected from 47 countries, of which 60% were craft beers. A selection of 1000 samples were screened for the presence of aflatoxin B1, ochratoxin A (OTA), zearalenone (ZEN), fumonisins (FBs), T-2 and HT-2 toxins (T-2 and HT-2) and deoxynivalenol (DON) using a mycotoxin 6-plex immunoassay. For confirmatory analysis, a liquid chromatography tandem mass spectrometry (LC-MS/MS) method was developed and applied. The 6-plex screening showed discrepancies with the LC-MS/MS analysis, possibly due to matrix interference and/or the presence of unknown mycotoxin metabolites. The major mycotoxins detected were DON and its plant metabolite deoxynivalenol-3-β-D-glucopyranoside (D3G). The 6-plex immunoassay reported the sum of DON and D3G (DON+D3G) contaminations ranging from 10 to 475 μg/L in 406 beers, of which 73% were craft beers. The popular craft beer style imperial stout, had the highest percentage of samples suspected positive (83%) with 29% of all imperial stout beers having DON+D3G contaminations above 100 μg/L. LC-MS/MS analysis showed that industrial pale lagers from Italy and Spain, predominantly contained FBs (3-69 μg/L). Besides FBs, African traditional beers also contained aflatoxins (0.1-1.2 μg/L). The presence of OTA, T-2, HT-2, ZEN, β-zearalenol, 3/15-acetyl-DON, nivalenol and the conjugated mycotoxin zearalenone 14-sulfate were confirmed in some beers. This study shows that in 27 craft beers, DON+D3G concentrations occurred above (or at) the Tolerable Daily Intake (TDI). Exceeding the TDI, may have a health impact. A better control of brewing malts for craft beer, should be put in place to circumvent this potential problem.

  14. Mycotoxin profiling of 1000 beer samples with a special focus on craft beer.

    Directory of Open Access Journals (Sweden)

    Jeroen Peters

    Full Text Available Currently beer is booming, mainly due to the steady rise of craft breweries worldwide. Previous surveys for occurrence of mycotoxins in beer, were mainly focussed on industrial produced beer. The present survey reports the presence of mycotoxins in craft beer and how this compares to industrial produced beer. More than 1000 beers were collected from 47 countries, of which 60% were craft beers. A selection of 1000 samples were screened for the presence of aflatoxin B1, ochratoxin A (OTA, zearalenone (ZEN, fumonisins (FBs, T-2 and HT-2 toxins (T-2 and HT-2 and deoxynivalenol (DON using a mycotoxin 6-plex immunoassay. For confirmatory analysis, a liquid chromatography tandem mass spectrometry (LC-MS/MS method was developed and applied. The 6-plex screening showed discrepancies with the LC-MS/MS analysis, possibly due to matrix interference and/or the presence of unknown mycotoxin metabolites. The major mycotoxins detected were DON and its plant metabolite deoxynivalenol-3-β-D-glucopyranoside (D3G. The 6-plex immunoassay reported the sum of DON and D3G (DON+D3G contaminations ranging from 10 to 475 μg/L in 406 beers, of which 73% were craft beers. The popular craft beer style imperial stout, had the highest percentage of samples suspected positive (83% with 29% of all imperial stout beers having DON+D3G contaminations above 100 μg/L. LC-MS/MS analysis showed that industrial pale lagers from Italy and Spain, predominantly contained FBs (3-69 μg/L. Besides FBs, African traditional beers also contained aflatoxins (0.1-1.2 μg/L. The presence of OTA, T-2, HT-2, ZEN, β-zearalenol, 3/15-acetyl-DON, nivalenol and the conjugated mycotoxin zearalenone 14-sulfate were confirmed in some beers. This study shows that in 27 craft beers, DON+D3G concentrations occurred above (or at the Tolerable Daily Intake (TDI. Exceeding the TDI, may have a health impact. A better control of brewing malts for craft beer, should be put in place to circumvent this potential

  15. Degradation of spent craft brewer's yeast by caprine rumen hyper ammonia-producing bacteria.

    Science.gov (United States)

    Harlow, B E; Bryant, R W; Cohen, S D; O'Connell, S P; Flythe, M D

    2016-10-01

    Spent yeast from craft beers often includes more hops (Humulus lupulus L.) secondary metabolites than traditional recipes. These compounds include α- and β- acids, which are antimicrobial to the rumen hyper ammonia-producing bacteria (HAB) that are major contributors to amino acid degradation. The objective was to determine if the hops acids in spent craft brewer's yeast (CY; ~ 3·5 mg g(-1) hops acids) would protect it from degradation by caprine rumen bacteria and HAB when compared to a baker's yeast (BY; no hops acids). Cell suspensions were prepared by harvesting rumen fluid from fistulated goats, straining and differential centrifugation. The cells were re-suspended in media with BY or CY. After 24 h (39°C), HAB were enumerated and ammonia was measured. Fewer HAB and less ammonia was produced from CY than from BY. Pure culture experiments were conducted with Peptostreptococcus anaerobiusBG1 (caprine HAB). Ammonia production by BG1 from BY was greater than from CY. Ammonia production was greater when exogenous amino acids were included, but similar inhibition was observed in CY treatments. These results indicate that rumen micro-organisms deaminated the amino acids in CY to a lesser degree than BY. Spent brewer's yeast has long been included in ruminant diets as a protein supplement. However, modern craft beers often include more hops (Humulus lupulus L.) than traditional recipes. These compounds include α- and β- acids, which are antimicrobial to the rumen hyper ammonia-producing bacteria (HAB) that are major contributors to amino acid degradation. This study demonstrated that hops acids in spent craft brewer's yeast protected protein from destruction by HABin vitro. These results suggest that the spent yeast from craft breweries, a source of beneficial hops secondary metabolites, could have value as rumen-protected protein. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

  16. The role of work-related needs in the relationship between job crafting, burnout and engagement

    Directory of Open Access Journals (Sweden)

    Fabrice Travaglianti

    2016-08-01

    Full Text Available Orientation: Knowing that it is imperative to better understand the antecedents and consequences of needs-supplies fit, the present research had two main objectives. Firstly we wanted to extend our knowledge about traditional psychological needs, for example highlighted through the Self-Determination Theory, by presenting more specific work-related needs. Secondly, following the new directions of organisational fit theories, we wanted to better understand how individuals make sense of fit. Research purpose: The purpose of this study is to propose more specific work-related needs in terms of employment quality and to test job crafting as an antecedent of needs-supplies fit (NS fit. We tested the double mediating role of NS fit (i.e. specific: based on more specific work-related needs, and general: based on global job perceptions between job crafting and individual outcomes namely burnout and work engagement. Motivation for the study: By taking into account more specific work-related needs, this study aimed to add more specific information to better help predict well-being at work. Moreover, the present research responds to the need to better understand how individuals make sense of fit. Research design, approach, and method: Data were collected in a Belgian Public Federal Service (N = 1500. Our research model was tested using Structural Equation Modelling with Mplus. Main findings: Results show, (1 that specific NS fit perception was positively related to a global NS fit perception and (2 the partial mediating role (specific and general of NS fit between job crafting and burnout and work engagement. Practical/managerial implications: Managers should encourage crafting behaviours and should know their team and that team’s specific needs. Contribution/added-value: By taking into account more specific work-related needs, our study suggests that needs-supplies may have more than one dimension. Moreover, it shows that job crafting is a way to

  17. Equipment abnormality monitoring device

    International Nuclear Information System (INIS)

    Ando, Yasumasa

    1991-01-01

    When an operator hears sounds in a plantsite, the operator compares normal sounds of equipment which he previously heard and remembered with sounds he actually hears, to judge if they are normal or abnormal. According to the method, there is a worry that abnormal conditions can not be appropriately judged in a case where the number of objective equipments is increased and in a case that the sounds are changed gradually slightly. Then, the device of the present invention comprises a plurality of monitors for monitoring the operation sound of equipments, a recording/reproducing device for recording and reproducing the signals, a selection device for selecting the reproducing signals among the recorded signals, an acoustic device for converting the signals to sounds, a switching device for switching the signals to be transmitted to the acoustic device between to signals of the monitor and the recording/reproducing signals. The abnormality of the equipments can be determined easily by comparing the sounds representing the operation conditions of equipments for controlling the plant operation and the sounds recorded in their normal conditions. (N.H.)

  18. Prioritizing equipment for replacement.

    Science.gov (United States)

    Capuano, Mike

    2010-01-01

    It is suggested that clinical engineers take the lead in formulating evaluation processes to recommend equipment replacement. Their skill, knowledge, and experience, combined with access to equipment databases, make them a logical choice. Based on ideas from Fennigkoh's scheme, elements such as age, vendor support, accumulated maintenance cost, and function/risk were used.6 Other more subjective criteria such as cost benefits and efficacy of newer technology were not used. The element of downtime was also omitted due to the data element not being available. The resulting Periop Master Equipment List and its rationale was presented to the Perioperative Services Program Council. They deemed the criteria to be robust and provided overwhelming acceptance of the list. It was quickly put to use to estimate required capital funding, justify items already thought to need replacement, and identify high-priority ranked items for replacement. Incorporating prioritization criteria into an existing equipment database would be ideal. Some commercially available systems do have the basic elements of this. Maintaining replacement data can be labor-intensive regardless of the method used. There is usually little time to perform the tasks necessary for prioritizing equipment. However, where appropriate, a clinical engineering department might be able to conduct such an exercise as shown in the following case study.

  19. Children Designing a Soft Toy. An LCE model as an application of the experiential learning during the holistic craft process

    Directory of Open Access Journals (Sweden)

    Marja-Leena Rönkkö

    2015-02-01

    Full Text Available In a holistic craft process, the same person designs a visual and technical appearance, produces the design with craft materials and technologies, make necessary changes to the design during its production and finally assesses the process and the finished product. Similarly, in the educational context, students should make craft products starting with the design process. These kinds of designing and hands-on activities nurture students’ creativity and problem-solving skills and offer them an opportunity to test their ideas and see them realised. Testing and further developing pedagogical approaches to holistic craft is important from the perspective of the renewal of the national core curriculum (2016 in Finland, which emphasises holistic approaches and the integration of different content areas. This study presents an experiential learning model of combining literature education, ethic-moral education and craft. Kolb’s model of experiential learning gives a solid and systematic theoretical base for this LCE model (one combining literature, craft and ethic-moral education. The teaching experiment is implemented as a craft process supported with children’s literature and activities based on a story. It seems that children can derive benefit from literature and activities during a craft making process. In addition, referencing literature enables the teacher to combine the craft process with multiple learning targets, fostering both ethical and content skills. We present the LCE model both in the light of an experiential learning model and the pragmatic implementations it gives rise to. According to our experiments, experiential learning can be meaningfully applied to the holistic craft process and craft education. Furthermore, the LCE model helps students to commit to holistic craft by nurturing a personal attachment. Normal 0 21 false false false FI X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso

  20. Analysis on online word-of-mouth of customer satisfaction in cultural and creative industries of Taiwan: using crafts as an example

    Science.gov (United States)

    Tsai, Li-Fen; Shaw, Jing-Chi; Wang, Pei-Wen; Shih, Meng-Long; Yang, Min-Chieh

    2011-10-01

    This study aims to analyze customers' online word-of-mouth for crafts in Cultural and Creative Industries of Taiwan, and extracts articles from Yahoo and Wretch Blogs by the online writing mining technique. The research scope is from Jan. 1, 2008 to Dec. 31, 2010. The subjects include 2457 valid articles on customers' online word-of-mouth regarding the craft industry of Taiwan. Findings demonstrate that, regarding online word-of-mouth, the most important word-of-mouth items of ceramics, stone craft, wood craft manufacturing, and metal craft is decoration and display of surroundings; while brand is valued in glass craft; and the most important item for consumers of paper craft is cultural characteristics of handicrafts.

  1. Radioactive decontamination of equipment

    International Nuclear Information System (INIS)

    1982-03-01

    After a recall of some definitions relating to decontamination techniques and of the regulation into effect, the principles to be respected to arrange rationally work zones are quoted while insisting more particularly on the types of coatings which facilitate maintenance operations and the dismantling of these installations. Then, the processes and equipments to use in decontamination units for routine or particular operations are described; the list of recommended chemical products to decontaminate the equipment is given. The influence of these treatments on the state and the duration of life of equipments is studied, and some perfectible methods are quoted. In the appendix, are given: the limits of surface contamination accepted in the centers; a standard project which defines the criteria of admissible residual contamination in wastes considered as cold wastes; some remarks on the interest that certain special ventilation and air curtain devices for the protection of operators working on apparatus generating contaminated dusts [fr

  2. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  3. Charging equipment. Ladegeraet

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, E

    1981-09-17

    The invention refers to a charging equipment, particularly on board charging equipment for charging traction batteries of an electric vehicle from the AC mains supply, consisting of a DC converter, which contains a controlled power transistor, a switching off unloading circuit and a power transmitter, where the secondary winding is connected in series with a rectifier diode, and a smoothing capacitor is connected in parallel with this series circuit. A converter module is provided, which consists of two DC voltage converters, whose power transistors are controlled by a control circuit in opposition with a phase displacement of 180/sup 0/.

  4. Experimental equipment, ch. 6

    International Nuclear Information System (INIS)

    Boomstra, F.; Hoogenboom, A.M.; Prins, C.M.; Strasters, B.A.; Vermeer, A.; Wit, P. de; Zwol, N.A. van.

    1977-01-01

    The experimental equipment in use at Utrecht university is discussed. Attention is paid to the tandem Van de Graaff accelerator and the 4MV and 1MV accelerators. The detection systems for gamma-ray spectroscopy are reviewed with emphasis on the compton-suppression spectrometer. The data-handling system used for experiments with the tandem is also briefly discussed

  5. Equipment gift to Monaco

    International Nuclear Information System (INIS)

    1970-01-01

    Research work at the Agency's Laboratory of Marine Radioactivity in Monaco, including that concerned with pollution of the sea, has been made more effective by its latest acquisition of equipment. This is a spectrophotometer donated by the Federal Republic of Germany. (author)

  6. Lifetime of Mechanical Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Leland, K.

    1999-07-01

    The gas plant at Kaarstoe was built as part of the Statpipe gas transport system and went on stream in 1985. In 1993 another line was routed from the Sleipner field to carry condensate, and the plant was extended accordingly. Today heavy additional supply- and export lines are under construction, and the plant is extended more than ever. The main role of the factory is to separate the raw gas into commercial products and to pump or ship it to the markets. The site covers a large number of well-known mechanical equipment. This presentation deals with piping, mechanical and structural disciplines. The lifetime of mechanical equipment is often difficult to predict as it depends on many factors, and the subject is complex. Mechanical equipment has been kept in-house, which provides detailed knowledge of the stages from a new to a 14 years old plant. The production regularity has always been very high, as required. The standard of the equipment is well kept, support systems are efficient, and human improvisation is extremely valuable.

  7. Safeguards techniques and equipment

    International Nuclear Information System (INIS)

    1997-01-01

    The current booklet is intended to give a full and balanced description of the techniques and equipment used for both nuclear material accountancy and containment and surveillance measures, and for the new safeguards measure of environmental sampling. As new verification measures continue to be developed, the material in the booklet will be periodically reviewed and updated versions issued. (author)

  8. Equipping tomorrow's fire manager

    Science.gov (United States)

    Christopher A. Dicus

    2008-01-01

    Fire managers are challenged with an ever-increasing array of both responsibilities and critics. As in the past, fire managers must master the elements of fire behavior and ecology using the latest technologies. In addition, today’s managers must be equipped with the skills necessary to understand and liaise with a burgeoning group of vocal stakeholders while also...

  9. Electrical equipment design library

    International Nuclear Information System (INIS)

    1994-01-01

    This book guides the design supervision, construction order for electrical equipment. The contents of this library are let's use electricity like this, leading-in-pole and casual power, electric pole install below 300KVA, electric pole install below 301∼1000KVA, electric pole install exceed 1000KVA, rooftop install exceed 1000KVA, CUBICLE type, 154KV services. It adds an appendix.

  10. Orphee reactor experimental equipment

    International Nuclear Information System (INIS)

    1987-01-01

    Experimental equipment around the ORPHEE reactor is presented. The neutron source; and the spectrometers and sample environment (inelastic and quasi-elastic scattering, elastic scattering, spread scattering, small angle scattering) are described. An experiment proposal and reports guide is supplied [fr

  11. Seismic qualification of equipment

    International Nuclear Information System (INIS)

    Heidebrecht, A.C.; Tso, W.K.

    1983-03-01

    This report describes the results of an investigation into the seismic qualification of equipment located in CANDU nuclear power plants. It is particularly concerned with the evaluation of current seismic qualification requirements, the development of a suitable methodology for the seismic qualification of safety systems, and the evaluation of seismic qualification analysis and testing procedures

  12. Underground coal equipment

    Energy Technology Data Exchange (ETDEWEB)

    Chadwick, J.

    2002-12-01

    This paper reports on increasing automation and enhanced productivity on longwalls, new development cutting and bolting technologies and haulage systems. Amongst equipment discussed is DBT's Electra series EL3000 shearer, the Dosco LH1400 roadheader with onboard bolters, and Joy 12 CM30 continuous miners. 4 photos.

  13. The alignment of product strategy to supply chain practices of craft businesses in Gauteng Province, South Africa

    Directory of Open Access Journals (Sweden)

    Craig Voortman

    2014-11-01

    Full Text Available External factors such as blurring market boundaries, escalating customer diversity and increasing global competitive threats have forced businesses to build strategies around key products and formulate market-driven strategies that are integrated with relationship and supply chain strategies to deliver superior customer value. Indeed, in the modern era of supply chain management, organisations are getting more integrated with their suppliers and customers as a way to manage the total supply chain. The purpose of this research was to determine if product strategies and supply chain practices of small craft business are aligned. Personal in-depth interviews were conducted with nine craft businesses operating in Gauteng Province, South Africa. The findings revealed that craft businesses struggle to match their product strategies with their supply chain strategies. Craft businesses also exhibited some inbound supply chain weaknesses.

  14. A review of new developments in the Friedel–Crafts alkylation – From green chemistry to asymmetric catalysis

    Directory of Open Access Journals (Sweden)

    Magnus Rueping

    2010-01-01

    Full Text Available The development of efficient Friedel–Crafts alkylations of arenes and heteroarenes using only catalytic amounts of a Lewis acid has gained much attention over the last decade. The new catalytic approaches described in this review are favoured over classical Friedel–Crafts conditions as benzyl-, propargyl- and allyl alcohols, or styrenes, can be used instead of toxic benzyl halides. Additionally, only low catalyst loadings are needed to provide a wide range of products. Following a short introduction about the origin and classical definition of the Friedel–Crafts reaction, the review will describe the different environmentally benign substrates which can be applied today as an approach towards greener processes. Additionally, the first diastereoselective and enantioselective Friedel–Crafts-type alkylations will be highlighted.

  15. Derivation of uranium residual radioactive material guidelines for the former Alba Craft Laboratory site, Oxford, Ohio

    International Nuclear Information System (INIS)

    Nimmagadda, M.; Faillace, E.; Yu, C.

    1994-01-01

    Residual radioactive material guidelines for uranium were derived for the former Alba Craft Laboratory site in Oxford, Ohio. This site has been identified for remedial action under the Formerly Utilized Sites Remedial Action Program (FUSRAP) of the US Department of Energy (DOE). Single nuclide and total uranium guidelines were derived on the basis of the requirement that the 50-year committed effective dose equivalent to a hypothetical individual who lives or works in the immediate vicinity of the former Alba Craft Laboratory site should not exceed a dose of 30 mrem/yr following remedial action for the current use and likely future use scenarios or a dose of 100 mrem/yr for less likely future use scenarios (Yu et al. 1993). The DOE residual radioactive material guideline computer code, RESRAD, which implements the methodology described in the DOE manual for implementing residual radioactive material guidelines, was used in this evaluation

  16. CRAFTING THE MICROWORLD: HOW ROBERT HOOKE CONSTRUCTED KNOWLEDGE ABOUT SMALL THINGS.

    Science.gov (United States)

    Lawson, Ian

    2016-03-20

    This paper investigates the way in which Robert Hooke constructed his microscopical observations. His Micrographia is justifiably famous for its detailed engravings, which communicated Hooke's observations of tiny nature to his readers, but less attention has been paid to how he went about making the observations themselves. In this paper I explore the relationship between the materiality of his instrument and the epistemic images he produced. Behind the pictures lies an array of hidden materials, and the craft knowledge it took to manipulate them. By investigating the often counter-theoretical and conflicting practices of his ingenious microscope use, I demonstrate the way in which Hooke crafted the microworld for his readers, giving insight into how early modern microscopy was understood by its practitioners and audience.

  17. Hull Surface Information Retrieval and Optimization of High Speed Planing Craft

    International Nuclear Information System (INIS)

    Ayob, A F; Wan Nik, W B; Ray, T; Smith, W F

    2012-01-01

    Traditional approach on ship design involve the use of a method which takes a form that was earlier called the 'general design diagram' and is now known as the 'design spiral' – an iterative ship design process that allows for an increase in complexity and precision across the design cycle. Several advancements have been made towards the design spiral, however inefficient for handling complex simultaneous design changes, especially when later variable changes affect the ship's performance characteristics evaluated in earlier stages. Reviewed in this paper are several advancements in high speed planing craft design in preliminary design stage. An optimization framework for high speed planing craft is discussed which consist of surface information retrieval module, a suite of state-of-the-art optimization algorithms and standard naval architectural performance estimation tools. A summary of the implementation of the proposed hull surface information retrieval and several case studies are presented to demonstrate the capabilities of the framework.

  18. Three-Point Flexural Properties of Bonded Reinforcement Elements for Pleasure Craft Decks

    Science.gov (United States)

    Di Bella, G.; Galtieri, G.; Borsellino, C.

    2018-02-01

    The aim of this work was both to study the performances of pleasure craft reinforced components, bonded using a structural adhesive, and to compare them with those obtained using over-lamination as joining system, typically employed in the shipbuilding. With such aim, two different lots of components were prepared: in the first lot, the reinforcement structures were laminated directly on the investigated composite components and, in the second one; they were made separately in a mould and, then, bonded to the composite components. This last method allowed to evaluate the introduction of a product/process innovation in a field typically unwilling to innovation, still tied to craft, and non-standardized procedures. The results of bending tests, performed in order to evaluate the mechanical behaviour of the reinforced components, evidenced the goodness of this innovative design choice. Finally, a finite element analysis was performed. [Figure not available: see fulltext.

  19. The role of big five factors on predicting job crafting propensities amongst administrative employees in a South African tertiary institution

    Directory of Open Access Journals (Sweden)

    Clement Bell

    2016-04-01

    Full Text Available Orientation: Personality provides a foundation for understanding employee job behaviours. It determines and reflects how they respond to their work situations. There is a shortage of previous researches that have specifically dealt with the predictive role of personality on job crafting. Job crafting is also a significantly new concept in the South African work context. It has both positive and negative consequences on employee job behaviours. Research purpose: The present study investigated the role of big five factors on predicting job crafting propensities amongst administrative employees in Alice, South Africa. Motivation for the study: The present study aimed to determine the role of big five factors on predicting job crafting propensities amongst administrative employees. It was premised on previous research that the big five factors are associated with many employee job behaviours. Research approach, design and method: The present study employed a quantitative, crosssectional research design with a sample of 246 administrative employees in Alice, South Africa. A biographical questionnaire, a Big Five Inventory, and a job crafting questionnaire were used to collect data. Main findings: The findings showed that big five factors of Conscientiousness, Extraversion, Agreeableness, Openness to experience and Neuroticism play a significant role in predicting job crafting propensities. Practical implications: The present study suggests that big five factors of Conscientiousness, Extraversion, Agreeableness, Openness to experience and Neuroticism have a predictive role on job crafting behaviours. Managers of tertiary institutions can therefore consider these big five personalities to understand and predict the impacts of their job design strategies on administrative employees’ behaviours. Contribution: The contribution of the study was significant in that it contributed to research literature representing the influence of the big five factors in

  20. Job Crafting: Older Workers’ Mechanism for Maintaining Person-Job Fit

    Science.gov (United States)

    Wong, Carol M.; Tetrick, Lois E.

    2017-01-01

    Aging at work is a dynamic process. As individuals age, their motives, abilities and values change as suggested by life-span development theories (Lang and Carstensen, 2002; Kanfer and Ackerman, 2004). Their growth and extrinsic motives weaken while intrinsic motives increase (Kooij et al., 2011), which may result in workers investing their resources in different areas accordingly. However, there is significant individual variability in aging trajectories (Hedge et al., 2006). In addition, the changing nature of work, the evolving job demands, as well as the available opportunities at work may no longer be suitable for older workers, increasing the likelihood of person-job misfit. The potential misfit may, in turn, impact how older workers perceive themselves on the job, which leads to conflicting work identities. With the traditional job redesign approach being a top-down process, it is often difficult for organizations to take individual needs and skills into consideration and tailor jobs for every employee (Berg et al., 2010). Therefore, job crafting, being an individualized process initiated by employees themselves, can be a particularly valuable mechanism for older workers to realign and enhance their demands-abilities and needs-supplies fit. Through job crafting, employees can exert personal agency and make changes to the task, social and cognitive aspects of their jobs with the goal of improving their work experience (Wrzesniewski and Dutton, 2001). Building on the Life Span Theory of Control (Heckhausen and Schulz, 1995), we posit that job crafting, particularly cognitive crafting, will be of increasing value as employees age. Through reframing how they think of their job and choosing to emphasize job features that are personally meaningful, older workers can optimize their resources to proactively redesign their jobs and maintain congruent, positive work identities. PMID:28943859

  1. Carlo Ginzburg and the Historian’s Craft: Questions and Remarks

    Directory of Open Access Journals (Sweden)

    Giovanni Tarantino

    2014-03-01

    Full Text Available Selected paper from the first edition of IinteR-La+b (the International Interdisciplinary Research Laboratory of the Accademia Nazionale dei Lincei, the Swiss Academies of Arts and Sciences and the Balzan Foundation held in Rome, at the Accademia Nazionale dei Lincei, 12–13 November 2012. Published in Giovanni Tarantino (ed., “Our words, and theirs:” A conversation with Carlo Ginzburg on the historian’s craft, Cromohs 18 (2013.

  2. CRAFTING CORPORATE SOCIAL RESPONSIBILITY (CSR): A CASE STUDY OF CSR STRATEGIZING AND INSTITUTIONALIZATION

    OpenAIRE

    Krikorian, Frederic

    2009-01-01

    This dissertation aims to fill a gap in CSR research by adopting a constructivist perspective to investigate how CSR practitioners craft strategies and how this contributes to the institutionalization of CSR in general, and of the ‘business case for CSR’ in particular. It does so by relying on the strategy-as-practice approach and the notions of institutional entrepreneurship and institutional work. This dissertation is based on a single-case study of two CSR practitioners who implemented a C...

  3. Job Crafting: Older Workers’ Mechanism for Maintaining Person-Job Fit

    Directory of Open Access Journals (Sweden)

    Carol M. Wong

    2017-09-01

    Full Text Available Aging at work is a dynamic process. As individuals age, their motives, abilities and values change as suggested by life-span development theories (Lang and Carstensen, 2002; Kanfer and Ackerman, 2004. Their growth and extrinsic motives weaken while intrinsic motives increase (Kooij et al., 2011, which may result in workers investing their resources in different areas accordingly. However, there is significant individual variability in aging trajectories (Hedge et al., 2006. In addition, the changing nature of work, the evolving job demands, as well as the available opportunities at work may no longer be suitable for older workers, increasing the likelihood of person-job misfit. The potential misfit may, in turn, impact how older workers perceive themselves on the job, which leads to conflicting work identities. With the traditional job redesign approach being a top-down process, it is often difficult for organizations to take individual needs and skills into consideration and tailor jobs for every employee (Berg et al., 2010. Therefore, job crafting, being an individualized process initiated by employees themselves, can be a particularly valuable mechanism for older workers to realign and enhance their demands-abilities and needs-supplies fit. Through job crafting, employees can exert personal agency and make changes to the task, social and cognitive aspects of their jobs with the goal of improving their work experience (Wrzesniewski and Dutton, 2001. Building on the Life Span Theory of Control (Heckhausen and Schulz, 1995, we posit that job crafting, particularly cognitive crafting, will be of increasing value as employees age. Through reframing how they think of their job and choosing to emphasize job features that are personally meaningful, older workers can optimize their resources to proactively redesign their jobs and maintain congruent, positive work identities.

  4. The development of folklore, arts and crafts in ukrainian ethnic minorities: trends (1990 – 2000-s)

    OpenAIRE

    V. M. Pekarchuk

    2014-01-01

    On the basis of represented wide palette of historical facts, analytic works, scientific documents it is made an attempt to reproduce the place and role of folklore, arts and crafts of Ukrainian ethnic minority cultures within 1990 ­ 2000 ­ ies. The importance of the designated problem is caused, first of all, the need to have a clear understanding of the mechanism of the decision problem of an independent state of interethnic relations. It was found that during the study years in Ukraine,...

  5. 3D DIGITAL SIMULATION OF MINNAN TEMPLE ARCHITECTURE CAISSON'S CRAFT TECHNIQUES

    OpenAIRE

    Y. C. Lin; T. C. Wu; M. F. Hsu

    2013-01-01

    Caisson is one of the important representations of the Minnan (southern Fujian) temple architecture craft techniques and decorative aesthetics. The special component design and group building method present the architectural thinking and personal characteristics of great carpenters of Minnan temple architecture. In late Qing Dynasty, the appearance and style of caissons of famous temples in Taiwan apparently presented the building techniques of the great carpenters. However, as the y...

  6. Application of CRAFT (complete reduction to amplitude frequency table) in nonuniformly sampled (NUS) 2D NMR data processing.

    Science.gov (United States)

    Krishnamurthy, Krish; Hari, Natarajan

    2017-09-15

    The recently published CRAFT (complete reduction to amplitude frequency table) technique converts the raw FID data (i.e., time domain data) into a table of frequencies, amplitudes, decay rate constants, and phases. It offers an alternate approach to decimate time-domain data, with minimal preprocessing step. It has been shown that application of CRAFT technique to process the t 1 dimension of the 2D data significantly improved the detectable resolution by its ability to analyze without the use of ubiquitous apodization of extensively zero-filled data. It was noted earlier that CRAFT did not resolve sinusoids that were not already resolvable in time-domain (i.e., t 1 max dependent resolution). We present a combined NUS-IST-CRAFT approach wherein the NUS acquisition technique (sparse sampling technique) increases the intrinsic resolution in time-domain (by increasing t 1 max), IST fills the gap in the sparse sampling, and CRAFT processing extracts the information without loss due to any severe apodization. NUS and CRAFT are thus complementary techniques to improve intrinsic and usable resolution. We show that significant improvement can be achieved with this combination over conventional NUS-IST processing. With reasonable sensitivity, the models can be extended to significantly higher t 1 max to generate an indirect-DEPT spectrum that rivals the direct observe counterpart. Copyright © 2017 John Wiley & Sons, Ltd.

  7. Dataset on Investigating the role of onsite learning in the optimisation of craft gang's productivity in the construction industry.

    Science.gov (United States)

    Ugulu, Rex Asibuodu; Allen, Stephen

    2017-12-01

    The data presented in this article is an original data on "Investigating the role of onsite learning in the optimisation of craft gang's productivity in the construction industry". This article describes the constraints influencing craft gang's productivity and the influence of onsite learning on the blockwork craft gang's productivity. It also presented the method of data collection, using a semi-structured interview and an observation method to collect data from construction organisations. We provided statistics on the top most important constraints affecting the craft gang's productivity using 3-D Bar charts. In addition, we computed the correlation coefficients and the regression model on the influence of onsite learning on craft gang's productivity using the man-hour as the dependent variable. The relationship between blockwork inputs and cycle numbers was determined at 5% significance level. Finally, we presented data information on the application of the learning curve theory using the unit straight-line model equations and computed the learning rate of the observed craft gang's blockwork repetitive work.

  8. SUSTAINABLE WASTE MANAGEMENT OF TRADITIONAL CRAFT INDUSTRY IN LOPATI TOURISM VILLAGE, YOGYAKARTA

    Directory of Open Access Journals (Sweden)

    VITASURYA Vincentia Reni

    2016-12-01

    Full Text Available Ecotourism has been growing in Yogyakarta that can be seen through the development of rural tourism. The development of rural tourism has positive impact to improve local community’s welfare nevertheless, it has also negative impact onto environmental carrying capacity. Lopati tourism village is located in Bantul, Yogyakarta, relying on traditional craft industry as tourism attraction. Traditional crafts are livelihood of local residents, so that environmental management efforts become part of their daily lives. This research aims to review the roles of community to reduce environmental impacts through analyzing the waste management of traditional craft industry. It used case study method to examine the uniqueness of Lopati village. Data collecting used participatory action research techniques in order to gather information from residents. Community participation acted to anticipate negative impact on development of rural tourism.  Waste management in Lopati committed by local residents not to cause adverse environmental impacts. The result show that waste management based on community participation supports the development of rural tourism.

  9. Noble gas control room accident filtration system for severe accident conditions (N-CRAFT)

    International Nuclear Information System (INIS)

    Hill, Axel; Stiepani, Cristoph; Drechsler, Michael

    2015-01-01

    Severe accidents might cause the release of airborne radioactive substances to the environment of the NPP either due to containment leakages or due to intentional filtered containment venting. In the latter case aerosols and iodine are retained, however noble gases are not retainable by the FCVS or by conventional air filtration systems like HEPA filters and iodine absorbers. Radioactive noble gases nevertheless dominate the activity release depending on the venting procedure and the weather conditions. To prevent unacceptable contamination of the control room atmosphere by noble gases, AREVA GmbH has developed a noble gas control room accident filtration system (CRAFT) which can supply purified fresh air to the control room without time limitation. The retention process is based on dynamic adsorption of noble gases on activated carbon. The system consists of delay lines (carbon columns) which are operated by a continuous and simultaneous adsorption and desorption process. CRAFT allows minimization of the dose rate inside the control room and ensures low radiation exposure to the staff by maintaining the control room environment suitable for prolonged occupancy throughout the duration of the accident. CRAFT consists of a proven modular design either transportable or permanently installed. (author)

  10. The development and validation of a job crafting measure for use with blue-collar workers

    DEFF Research Database (Denmark)

    Nielsen, Karina; Abildgaard, Johan Simonsen

    2012-01-01

    Abstract Job crafting describes a set of proactive behaviours in which employees may engage to shape their work in order to minimize hindering job demands and maximize resources and challenging demands. Such behaviours may be particularly important among blue-collar workers whose jobs are charact......Abstract Job crafting describes a set of proactive behaviours in which employees may engage to shape their work in order to minimize hindering job demands and maximize resources and challenging demands. Such behaviours may be particularly important among blue-collar workers whose jobs...... are characterized by poor working conditions and low well-being. We present the development and adaptation of a job crafting measure that may be used among blue-collar workers, based on an existing scale by Tims, Bakker, and Derks (2012) that was not specifically developed for blue-collar workers. We test......, increasing social job resources, increasing quantitative demands and decreasing hindering job demands. These can be reliably measured with 15 items. The measure shows acceptable discriminant and criterion validity, and test-retest reliability. The findings extend the application of the original questionnaire...

  11. Deep Visual Attributes vs. Hand-Crafted Audio Features on Multidomain Speech Emotion Recognition

    Directory of Open Access Journals (Sweden)

    Michalis Papakostas

    2017-06-01

    Full Text Available Emotion recognition from speech may play a crucial role in many applications related to human–computer interaction or understanding the affective state of users in certain tasks, where other modalities such as video or physiological parameters are unavailable. In general, a human’s emotions may be recognized using several modalities such as analyzing facial expressions, speech, physiological parameters (e.g., electroencephalograms, electrocardiograms etc. However, measuring of these modalities may be difficult, obtrusive or require expensive hardware. In that context, speech may be the best alternative modality in many practical applications. In this work we present an approach that uses a Convolutional Neural Network (CNN functioning as a visual feature extractor and trained using raw speech information. In contrast to traditional machine learning approaches, CNNs are responsible for identifying the important features of the input thus, making the need of hand-crafted feature engineering optional in many tasks. In this paper no extra features are required other than the spectrogram representations and hand-crafted features were only extracted for validation purposes of our method. Moreover, it does not require any linguistic model and is not specific to any particular language. We compare the proposed approach using cross-language datasets and demonstrate that it is able to provide superior results vs. traditional ones that use hand-crafted features.

  12. Classification of radiolarian images with hand-crafted and deep features

    Science.gov (United States)

    Keçeli, Ali Seydi; Kaya, Aydın; Keçeli, Seda Uzunçimen

    2017-12-01

    Radiolarians are planktonic protozoa and are important biostratigraphic and paleoenvironmental indicators for paleogeographic reconstructions. Radiolarian paleontology still remains as a low cost and the one of the most convenient way to obtain dating of deep ocean sediments. Traditional methods for identifying radiolarians are time-consuming and cannot scale to the granularity or scope necessary for large-scale studies. Automated image classification will allow making these analyses promptly. In this study, a method for automatic radiolarian image classification is proposed on Scanning Electron Microscope (SEM) images of radiolarians to ease species identification of fossilized radiolarians. The proposed method uses both hand-crafted features like invariant moments, wavelet moments, Gabor features, basic morphological features and deep features obtained from a pre-trained Convolutional Neural Network (CNN). Feature selection is applied over deep features to reduce high dimensionality. Classification outcomes are analyzed to compare hand-crafted features, deep features, and their combinations. Results show that the deep features obtained from a pre-trained CNN are more discriminative comparing to hand-crafted ones. Additionally, feature selection utilizes to the computational cost of classification algorithms and have no negative effect on classification accuracy.

  13. Visual communication and terminal equipment

    International Nuclear Information System (INIS)

    Kang, Cheol Hui

    1988-06-01

    This book is divided two parts about visual communication and terminal equipment. The first part introduces visual communication, which deals with foundation of visual communication, technique of visual communication, equipment of visual communication, a facsimile and pictorial image system. The second part contains terminal equipment such as telephone, terminal equipment for data transmission on constitution and constituent of terminal equipment for data transmission, input device and output device, terminal device and up-to-date terminal device.

  14. Visual communication and terminal equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Cheol Hui

    1988-06-15

    This book is divided two parts about visual communication and terminal equipment. The first part introduces visual communication, which deals with foundation of visual communication, technique of visual communication, equipment of visual communication, a facsimile and pictorial image system. The second part contains terminal equipment such as telephone, terminal equipment for data transmission on constitution and constituent of terminal equipment for data transmission, input device and output device, terminal device and up-to-date terminal device.

  15. Equipment cost optimization

    International Nuclear Information System (INIS)

    Ribeiro, E.M.; Farias, M.A.; Dreyer, S.R.B.

    1995-01-01

    Considering the importance of the cost of material and equipment in the overall cost profile of an oil company, which in the case of Petrobras, represents approximately 23% of the total operational cost or 10% of the sales, an organization for the optimization of such costs has been established within Petrobras. Programs are developed aiming at: optimization of life-cycle cost of material and equipment; optimization of industrial processes costs through material development. This paper describes the methodology used in the management of the development programs and presents some examples of concluded and ongoing programs, which are conducted in permanent cooperation with suppliers, technical laboratories and research institutions and have been showing relevant results

  16. X-ray equipment

    International Nuclear Information System (INIS)

    Redmayne, I.G.B.

    1988-01-01

    The patent concerns a warning and protection system for mobile x-ray equipment used for 'on site' radiography, so that workers in the vicinity of such a working unit can be alerted to its presence. The invention is a local repeater warning system which gives a preliminary warning that energisation of the tubehead is imminent, as well as a switch near the tubehead to abort or inhibit energisation. The latter switch allows personnel caught in the vicinity of the tubehead to prevent energisation. The preliminary warning may be flashing lamps or by a klaxon. The control unit for the equipment may include a monitoring circuit to detect failure of the warning light or klaxon. (U.K.)

  17. X-ray equipment

    Energy Technology Data Exchange (ETDEWEB)

    Redmayne, I.G.B.

    1988-01-06

    The patent concerns a warning and protection system for mobile x-ray equipment used for 'on site' radiography, so that workers in the vicinity of such a working unit can be alerted to its presence. The invention is a local repeater warning system which gives a preliminary warning that energisation of the tubehead is imminent, as well as a switch near the tubehead to abort or inhibit energisation. The latter switch allows personnel caught in the vicinity of the tubehead to prevent energisation. The preliminary warning may be flashing lamps or by a klaxon. The control unit for the equipment may include a monitoring circuit to detect failure of the warning light or klaxon. (U.K.).

  18. Tube for irradiation equipment

    International Nuclear Information System (INIS)

    Goehrich, K.; Vogt, H.

    1979-01-01

    This patent describes a tube for irradiation equipment for limiting an emergent beam, with a baseplate, possessing a central aperture, intended for attaching to the equipment, as well as four carrier plates, each of which possesses a limiting edge and a sliding edge located at right angles thereto. The carrier plates are located parallel to the baseplate, the limiting edge of each carrier plate resting against the sliding edge of the adjacent carrier plate and each of the two mutually opposite pairs of carrier plates being displaceable, parallel to the direction of its sliding edges and symmetrically to the center of the transmission aperture, for the purpose of continuously varying the transmission aperture defined by the limiting edges, during which displacement each of the displaced carrier plates carries with it the carrier plate, resting against the limiting edge of the former plate, parallel to the direction of the limiting edge of the latter plate. 8 claims

  19. Calculating the price of tanks, vessels and process equipment of petrochemical industry second criteria of integrity and survival remaining of API RP 579 (Fitness for service); Calculo do preco de tanques, vasos e equipamentos de processo da industria petroquimica segundo criterios de integridade e sobrevida remanescente do API RP 579 (Fitness for service)

    Energy Technology Data Exchange (ETDEWEB)

    Morato, Paulo Cesar Vidal Morato [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    By owning many tanks, vessels and process equipment, PETROBRAS has developed the concept of 'Fitness-For-Service' (suitability for use) under the standard API RP 579, i.e. to verify the structural integrity and remaining useful life of equipment in service. In this paper we will discuss how to calculate the remaining useful life of equipment used in accordance with such criteria and with this technical data, calculate the depreciated price. Steps: verification of applicability; surveys of the technical data of the equipment; surveys the minimum thickness of plating equipment over the years; calculation of the average annual rate of corrosion (tc); calculation of the required minimum thickness according to the criteria of API RP 579 (tr); calculation of remaining useful life (nr); calculation of the depreciated price (Vd) equipment. Conclusions: intended for evaluation of tanks price, vessels and process equipment according to API RP 579 concepts. Estimate the remaining useful life of equipment used and calculates the depreciated price. Scientific method based, consistent and robust, due to calculating established the remaining useful life. (author)

  20. Equipment for isotope diagnostics

    International Nuclear Information System (INIS)

    Platz, W.

    1976-01-01

    The invention concerns an improvement of equipment for isotope diagnostics allowing to mark special intensity ranges of the recorded measurements by means of different colors. For undisturbed operation it is of advantage to avoid electric circuits between movable and unmovable parts of the color recorder. According to the invention, long gear wheels of glass fiber-reinforced polyamide are used for these connections. (ORU) [de

  1. Soviet equipment flies in

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    End of February 1977 a Soviet Ilyushin-76 heavy freight aircraft landed at Cointrin airport having on board fifty large wire proprtional chambers and associated apparatus, together weighing 10 tons, supplied by the Joint Institute for Nuclear Research, Dubna, USSR. The equipment was for the CERN- Dubna-Munich-Saclay experiment NA4 on deep inelastic muon scattering being set up in the North Area of SPS. See Weekly Bulletin 11/78.

  2. Labelling of equipment dispensers.

    Science.gov (United States)

    Gray, D C

    1993-01-01

    A new labelling system for use on medical equipment dispensers is tested. This system uses one of the objects stored in each unit of the dispenser as the 'label', by attaching it to the front of the dispenser with tape. The new system was compared to conventional written labelling by timing subjects asked to select items from two dispensers. The new system was 27% quicker than the conventional system. Images Fig. 1 PMID:8110335

  3. Equipment Obsolescence Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.

    2014-07-01

    Nuclear Power Plant (NPP) Operators are challenged with securing reliable supply channels for safety related equipment due to equipment obsolescence. Many Original Equipment Manufacturers (OEMs) have terminated production of spare parts and product life-cycle support. The average component life cycles are much shorter than the NPP design life, which means that replacement components and parts for the original NPP systems are not available for the complete design life of the NPPs. The lack or scarcity of replacement parts adversely affects plant reliability and ultimately the profitability of the affected NPPs. This problem is further compounded when NPPs pursue license renewal and approval for plant-life extension. A reliable and predictable supply of replacement co components is necessary for NPPs to remain economically competitive and meet regulatory requirements and guidelines. Electrical and I and C components, in particular, have short product life cycles and obsolescence issues must be managed pro actively and not reactively in order to mitigate the risk to the NPP to ensure reliable and economic NPP operation. (Author)

  4. Personal protective equipment

    International Nuclear Information System (INIS)

    2004-01-01

    This Practical Radiation Technical Manual is one of a series that has been designed to provide guidance on radiological protection for employers, radiation protection officers, managers and other technically competent persons who have responsibility for ensuring the safety of employees working with ionizing radiation. The Manual may be used with the appropriate IAEA Practical Radiation Safety Manuals to provide training, instruction and information for all employees engaged in work with ionizing radiation. Personal protective equipment (PPE) includes clothing or other special equipment that is issued to individual workers to provide protection against actual or potential exposure to ionizing radiations. It is used to protect each worker against the prevailing risk of external or internal exposure in circumstances in which it is not reasonably practicable to provide complete protection by means of engineering controls or administrative methods. Adequate personal protection depends on PPE being correctly selected, fitted and maintained. Appropriate training for the users and arrangements to monitor usage are also necessary to ensure that PPE provides the intended degree of protection effectively. This Manual explains the principal types of PPE, including protective clothing and respiratory protective equipment (RPE). Examples of working procedures are also described to indicate how PPE should be used within a safe system of work. The Manual will be of most benefit if it forms part of a more comprehensive training programme or is supplemented by the advice of a qualified expert in radiation protection. Some of the RPE described in this Manual should be used under the guidance of a qualified expert

  5. Scientific Equipment Division - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    2001-01-01

    Full text: The Scientific Equipment Division consists of the Design Group and the Mechanical Workshop. The activity of the Division includes the following: - designing of devices and equipment for experiments in physics, their mechanical construction and assembly. In particular, there are vacuum chambers and installations for HV and UHV; - maintenance and upgrading of the existing installations and equipment in our Institute; - participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCAD graphic software (release 2000 and Mechanical Desktop 4.0) and a AO plotter, what allows us to make drawings and 2- and 3-dimensional mechanical documentation to the world standards. The Mechanical Workshop can offer a wide range of machining and treatment methods with satisfactory tolerances and surface quality. It offers the following possibilities: - turning - cylindrical elements of a length up to 2000 mm and a diameter up to 400 mm, and also disc-type elements of a diameter up to 600 mm and a length not exceeding 300 mm; - milling - elements of length up to 1000 mm and gear wheels of diameter up to 300 mm; - grinding - flat surfaces of dimensions up to 300 mm x 1000 mm and cylindrical elements of a diameter up to 200 mm and a length up to 800 mm; - drilling - holes of a diameter up to 50 mm; - welding - electrical and gas welding, including TIG vacuum-tight welding; - soft and hard soldering; - mechanical works including precision engineering; - plastics treatment - machining and polishing using diamond milling, modelling, lamination of various shapes and materials, including plexiglas, scintillators and light-guides; - painting - paint spraying with possibility of using furnace-fred drier of internal dimensions of 800 mm x 800 mm x 800 mm. Our workshop posses CNC milling machine which can be used for machining of work-pieces up to 500 kg

  6. Mining face equipment

    Energy Technology Data Exchange (ETDEWEB)

    G, Litvinskiy G; Babyuk, G V; Yakovenko, V A

    1981-01-07

    Mining face equipment includes drilling advance wells, drilling using explosives on the contour bore holes, loading and transporting the crushed mass, drilling reinforcement shafts, injecting reinforcement compounds and moving the timber. Camouflet explosives are used to form relaxed rock stress beyond the mining area to decrease costs of reinforcing the mining area by using nonstressed rock in the advance well as support. The strengthening solution is injected through advanced cementing wells before drilling the contour bores as well as through radial cementing wells beyond the timbers following loading and transport of the mining debris. The advance well is 50-80 m.

  7. Coal ash monitoring equipment

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, C G; Wormald, M R

    1978-10-02

    The monitoring equipment is used to determine the remainder from combustion (ash slack) of coal in wagons designed for power stations. Next to the rails, a neutron source (252 Cf, 241 Am/Be) is situated, which irradiates the coal with neutrons at a known dose, which produces the reaction 27 Al (n ..gamma..) Al 28. The aluminium content is a measure of the remainder. The 1.78 MeV energy is measured downstream of the rail with a detector. The neutron source can only act in the working position of a loaded wagon.

  8. Management of Transportation Equipment.

    Science.gov (United States)

    1982-11-01

    Record% % %. "jP -M -. M LIh TRANSPORTATION MAENTKENAI4CE SHOP WORKLOAD CONTROL WORK CENTER SADR A-OR .a’* tLR 4.,R53 8114LM 0 o 251 50 75 100 125 ISO ...PDBP 06 7 4892 TRACTOR, WHEEL, INDUST, 14001-20000 PDBP 06 7 4893 TRACTOR, WHEEL, INDUST, 20001-27000 PDBP 06 7 4894 TRACTOR, WHEEL, INDUST, 27001 PDBP...27K TRACTOR, WHEEL, INDUST, 27001 PDBP & UP P-i LINE ITEM 07 LIGHTING AND POWER GENERATION EQUIPMENT 5110 T FLOODLIGHT ELEC FLOODLIGHT, ELEC, TRUCK

  9. Emergence of the North American center of excellence for transportation equipment

    Directory of Open Access Journals (Sweden)

    Richard Gottschall

    2017-07-01

    Full Text Available Following the closure of Plattsburgh Air Force Base in 1995, the northeastern region of New York State faced a unique economic development challenge. In addition to the loss of the air base, the rural area suffers from urbanization and automation in manufacturing trends. While the quality of life is highly rated, population and job growth stagnate. Isolated geographically by Lake Champlain to the East, the Adirondack Mountains to the South and West, and long distances to southern economic centers in the state, the region has looked north of the Canadian border and positioned itself as "Montreal's US suburb". Economic developers have crafted bi-national agreements between regional organizations, improved cross-border infrastructure, and enhanced educational institutions for the purpose of attracting Canadian and international manufacturers to the region. In 2015, the North American Center of Excellence in Transportation Equipment was launched and six new companies joined the cluster, doubling its size and perhaps providing a base for further growth. Manufacturing jobs are likely to grow for the first time in more than 20-years. We use cluster theory to argue that this formation of companies may still be insufficient to catalyze cluster emergence and the desired goal of regional competitiveness. Moving forward in the crafting of regional economic development policy, we emphasize the importance of viewing the North American Center of Excellence for Transportation Equipment as a pre-emergent cluster in need of further support to reach its potential.

  10. Effects of a job crafting intervention program on work engagement among Japanese employees: a pretest-posttest study.

    Science.gov (United States)

    Sakuraya, Asuka; Shimazu, Akihito; Imamura, Kotaro; Namba, Katsuyuki; Kawakami, Norito

    2016-10-24

    Job crafting, an employee-initiated job design/redesign, has become important for employees' well-being such as work engagement. This study examined the effectiveness of a newly developed job crafting intervention program on work engagement (as primary outcome), as well as job crafting and psychological distress (as secondary outcomes), using a pretest-posttest study design among Japanese employees. Participants were managers of a private company and a private psychiatric hospital in Japan. The job crafting intervention program consisted of two 120-min sessions with a two-week interval between them. Outcomes were assessed at baseline (Time 1), post-intervention (Time 2), and a one-month follow-up (Time 3). The mixed growth model analyses were conducted using time (Time 1, Time 2, and Time 3) as an indicator of intervention effect. Effect sizes were calculated using Cohen's d. The program showed a significant positive effect on work engagement (t = 2.20, p = 0.03) in the mixed growth model analyses, but with only small effect sizes (Cohen's d = 0.33 at Time 2 and 0.26 at Time 3). The program also significantly improved job crafting (t = 2.36, p = 0.02: Cohen's d = 0.36 at Time 2 and 0.47 at Time 3) and reduced psychological distress (t = -2.06, p = 0.04: Cohen's d = -0.15 at Time 2 and -0.31 at Time 3). The study indicated that the newly developed job crafting intervention program was effective in increasing work engagement, as well as in improving job crafting and decreasing psychological distress, among Japanese managers. UMIN Clinical Trials Registry UMIN000024062 . Retrospectively registered 15 September 2016.

  11. Effects of a job crafting intervention program on work engagement among Japanese employees: a pretest-posttest study

    Directory of Open Access Journals (Sweden)

    Asuka Sakuraya

    2016-10-01

    Full Text Available Abstract Background Job crafting, an employee-initiated job design/redesign, has become important for employees’ well-being such as work engagement. This study examined the effectiveness of a newly developed job crafting intervention program on work engagement (as primary outcome, as well as job crafting and psychological distress (as secondary outcomes, using a pretest-posttest study design among Japanese employees. Methods Participants were managers of a private company and a private psychiatric hospital in Japan. The job crafting intervention program consisted of two 120-min sessions with a two-week interval between them. Outcomes were assessed at baseline (Time 1, post-intervention (Time 2, and a one-month follow-up (Time 3. The mixed growth model analyses were conducted using time (Time 1, Time 2, and Time 3 as an indicator of intervention effect. Effect sizes were calculated using Cohen’s d. Results The program showed a significant positive effect on work engagement (t = 2.20, p = 0.03 in the mixed growth model analyses, but with only small effect sizes (Cohen’s d = 0.33 at Time 2 and 0.26 at Time 3. The program also significantly improved job crafting (t = 2.36, p = 0.02: Cohen’s d = 0.36 at Time 2 and 0.47 at Time 3 and reduced psychological distress (t = −2.06, p = 0.04: Cohen’s d = −0.15 at Time 2 and −0.31 at Time 3. Conclusions The study indicated that the newly developed job crafting intervention program was effective in increasing work engagement, as well as in improving job crafting and decreasing psychological distress, among Japanese managers. Trial registration UMIN Clinical Trials Registry UMIN000024062 . Retrospectively registered 15 September 2016.

  12. Californium-252 Program Equipment Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Chattin, Fred Rhea [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilson, Kenton [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ezold, Julie G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-12-01

    To successfully continue the 252Cf production and meet the needs of the customers, a comprehensive evaluation of the Building 7920 processing equipment was requested to identify equipment critical to the operational continuity of the program.

  13. Characterization equipment essential drawing plan

    International Nuclear Information System (INIS)

    WILSON, G.W.

    1999-01-01

    The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered Support drawings until the Characterization Equipment Drawing Evaluation Report is completed

  14. Coal mining equipment

    International Nuclear Information System (INIS)

    Stein, R.R.; Martin, T.W.

    1991-01-01

    The word in longwall components is big, and these larger components have price tags to match. The logic behind the greater investment is that it will yield high production rates and good uptime statistics. This is true in most cases. More important than single-shift tonnage records, average shift production continues to climb upwards. This paper reports on the quality, and more significantly, the quantity of service supplied for long-wall equipment, which has reached levels that would have been seen as unachievable when longwall mining was first introduced in the U.S. The school of thought then was that longwall would increase productivity in part by reducing the number of production units and thus reducing the number of personnel employed underground. The expectation of fewer employees turned out to be unrealistic. That was probably one reason that some early attempts to install longwall system looked more like failures than vision of the future

  15. Reactor fuel charging equipment

    International Nuclear Information System (INIS)

    Wade, Elman.

    1977-01-01

    In many types of reactor fuel charging equipment, tongs or a grab, attached to a trolley, housed in a guide duct, can be used for withdrawing from the core a selected spent fuel assembly or to place a new fuel assembly in the core. In these facilities, the trolley may have wheels that roll on rails in the guide duct. This ensures the correct alignment of the grab, the trolley and fuel assembly when this fuel assembly is being moved. By raising or lowering such a fuel assembly, the trolley can be immerged in the coolant bath of the reactor, whereas at other times it can be at a certain level above the upper surface of the coolant bath. The main object of the invention is to create a fuel handling apparatus for a sodium cooled reactor with bearings lubricated by the sodium coolant and in which the contamination of these bearings is prevented [fr

  16. A Vision-Based Method for Autonomous Landing of a Rotor-Craft Unmanned Aerial Vehicle

    Directory of Open Access Journals (Sweden)

    Z. Yuan

    2006-01-01

    Full Text Available This article introduces a real-time vision-based method for guided autonomous landing of a rotor-craft unmanned aerial vehicle. In the process of designing the pattern of landing target, we have fully considered how to make this easier for simplified identification and calibration. A linear algorithm was also applied using a three-dimensional structure estimation in real time. In addition, multiple-view vision technology is utilized to calibrate intrinsic parameters of camera online, so calibration prior to flight is unnecessary and the focus of camera can be changed freely in flight, thus upgrading the flexibility and practicality of the method.

  17. 3D technology in fine art and craft exploring 3D printing, scanning, sculpting and milling

    CERN Document Server

    Mongeon, Bridgette

    2015-01-01

    The possibilities for creation are endless with 3D printing, sculpting, scanning, and milling, and new opportunities are popping up faster than artists can keep up with them. 3D Technology in Fine Art and Craft takes the mystery out of these exciting new processes by demonstrating how to navigate their digital components and showing their real world applications. Artists will learn to incorporate these new technologies into their studio work and see their creations come to life in a physical form never before possible. Featuring a primer on 3D basics for beginners,interviews, tutorials, and ar

  18. Thesaurus of craft and professional terminology in Ukrainian bibliopegy: the issues of a special dictionary formation

    Directory of Open Access Journals (Sweden)

    Halchenko O.

    2015-01-01

    Full Text Available The article covers terminological problems which arise when medieval manuscripts’ bindings are described for scientific catalogs and electronic databases. The author attempts to analyze the causes of these problems and ways to overcome them. Reviewed are handwritten and printed sources, which contain the terms dealing with manuscripts production, and substantiated is the relevance of formation of the national craft and professional terminology thesaurus in Ukrainian codicology and bibliopegy. We have also defined the basic steps of the dictionary creation, which are the following: collecting special terms and creating a glossary and card index; translation, editing and unification of borrowed terms; creation of a digital visual dictionary

  19. Organocatalytic Michael and Friedel–Crafts reactions in enantioselective synthesis of biologically active compounds

    International Nuclear Information System (INIS)

    Maltsev, O V; Beletskaya, Irina P; Zlotin, Sergei G

    2011-01-01

    Recent applications of organocatalytic Michael and Friedel–Crafts reactions in enantioselective synthesis of biologically active compounds: natural products, pharmaceutical agents and plant protection agents are reviewed. The key mechanisms of stereoinduction, types of organocatalysts and reagents used in these reactions are considered. The material is classified according to the type of newly formed bonds incorporating the asymmetric carbon atom, and the information for the most numerous C–C coupling reactions is systematized according to the natures of the electrophile and the nucleophile. The bibliography includes 433 references.

  20. Investigation of air bipolar ionization effects in cheese and kajmak craft production

    International Nuclear Information System (INIS)

    Pešić-Mikulec, D.; Puđa, P.D.; Blagić, G.S.; Miočinović, J.B.; Slović, M.D.

    2010-01-01

    Milk and dairy products are sustainable to the development of numerous microorganisms, especially pathogens. Therewith, it is necessary to achieve a high level of hygiene in dairy plants, in order to get safe and high quality products. Based on that, modern food production implies application of different air treatments. Microbiological status of air and working surfaces in the cheese and kajmak craft production, before and after air treatment by bipolar ionization, was investigated. It is concluded that bipolar ionization may be considered as an efficient method for improving of microbiological status of air, as well as surfaces that are in contact with the air

  1. Applications of isotopic labeling to the study of Friedel-Crafts reactions

    International Nuclear Information System (INIS)

    Roberts, R.M.; Gibson, T.L.

    1980-01-01

    A number of Friedel-Crafts processes that have been examined by the use of isotopic methods are considered: (1) the interaction of a Lewis acid with an acyl or alkyl halide; (2) the rearrangements of an alkylating species resulting from such an interaction, as observed in the arene products or in recovered starting materials; and (3) isomerizations of alkylation products which can occur in the presence of Lewis acids including (a) the alkylbenzene rearrangement (internal, of side chains), (b) disproportionation (intermolecular alkyl transfers), and (c) reorientations, which may be the results of either intra- or intermolecular processes. (Auth.)

  2. Analysis of the flow instability among channels of the OTSG in the naval craft NPP

    Energy Technology Data Exchange (ETDEWEB)

    Hou, Su-xia; Luo, Ji-jun; Xu, Jun; Liu, Jie-yu [Xi' an Hi-Tech Institute, Shaanxi (China)

    2014-11-15

    The instability occurring of the OTSG (Once-Through Steam Generator) in naval craft nuclear power plants is presented by the multivariable frequency domain theory. As concerning coupling interactions of the OTSG tubing, it is more accurate for analyzing the instability of OTSG compared to the common single variable method. A mathematical model for the system is derived from the fundamental equations by using the perturbation, Laplace-transform and the nodalization techniques. The stable boundary and parameters which influence the stability of the system are evaluated through computer simulation.

  3. Teaching Quantum Mechanics with qCraft: Outreach and Video Games

    Science.gov (United States)

    Kubica, Aleksander; Chatwin-Davies, Aidan; Michalakis, Spyridon

    Why is quantum mechanics considered a hard and inaccessible subject? Part of the difficulty is due to the nature of the subject itself. However, no small part of the difficulty is its pedagogy, which often relies on out-of-date historical motivation and experimental evidence that is disconnected from day-to-day experiences. In this first talk, we explore ways in which video games are well-suited to teaching quantum mechanics, in particular with regards to building intuition, as well as some of their limitations. We then illustrate these considerations through qCraft, an extension for Minecraft that incorporates aspects of quantum mechanics into the game.

  4. Chapter 12. Space Heating Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

  5. Survival pathways under stress

    Indian Academy of Sciences (India)

    First page Back Continue Last page Graphics. Survival pathways under stress. Bacteria survive by changing gene expression. pattern. Three important pathways will be discussed: Stringent response. Quorum sensing. Proteins performing function to control oxidative damage.

  6. Comparison of hand-craft feature based SVM and CNN based deep learning framework for automatic polyp classification.

    Science.gov (United States)

    Younghak Shin; Balasingham, Ilangko

    2017-07-01

    Colonoscopy is a standard method for screening polyps by highly trained physicians. Miss-detected polyps in colonoscopy are potential risk factor for colorectal cancer. In this study, we investigate an automatic polyp classification framework. We aim to compare two different approaches named hand-craft feature method and convolutional neural network (CNN) based deep learning method. Combined shape and color features are used for hand craft feature extraction and support vector machine (SVM) method is adopted for classification. For CNN approach, three convolution and pooling based deep learning framework is used for classification purpose. The proposed framework is evaluated using three public polyp databases. From the experimental results, we have shown that the CNN based deep learning framework shows better classification performance than the hand-craft feature based methods. It achieves over 90% of classification accuracy, sensitivity, specificity and precision.

  7. The Burden of Craft in Arthroscopic Rotator Cuff Repair: Where Have We Been and Where We Are Going.

    Science.gov (United States)

    Burkhart, Stephen S

    2015-08-01

    The rather turbulent history of arthroscopic rotator cuff repair went through stages of innovation, conflict, disruption, assimilation, and transformation that might be anticipated when a new and advanced technology (arthroscopic cuff repair) displaces an entrenched but outdated discipline (open cuff repair). The transition from open to arthroscopic rotator cuff repair has been a major paradigm shift that has greatly benefited patients. However, this technical evolution/revolution has also imposed a higher "burden of craft" on the practitioners of arthroscopic rotator cuff repair. Technological advancements in surgery demand that surgeons accept this burden of craft and master the advanced technology for the benefit of their patients. This article outlines the author's involvement in the development of arthroscopic rotator cuff repair, and it also explores the surgeon's obligation to accept the burden of craft that is imposed by this discipline.

  8. Equipment repair in coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, S

    1982-01-01

    Most equipment in Chinese coal mines consists of machinery and equipment produced in the 1950s; the efficiency of 4-62, CTD-57 and 70B/sub 2/ ventilators is 15% lower than that of new ones; that of SSM and AYaP pumps, 10% lower than of modern ones. Equipment renovation is done in three ways: replacing obsolete equipment with new equipment of the same type; improving the performance of existing equipment by introducing efficiency and reconstruction; and replacing obsolete equipment with advanced equipment. It is indicated that the second way, for example, replacement of 4-62 ventilator blades with a maximum efficiency of 73% by 4-72 ventilator blades raises its efficiency to 90%. Replacing the 8DA-8x3 water pump, having a maximum efficiency of 63%, with the 200D 43x3 pump with a maximum efficiency of 78%, enables an electricity savings of 7000 yuan per year, which exceeds all replacement costs (600 yuan). The need to improve equipment maintenance and preventive work to increase equipment service life and to introduce new techniques and efficiency is noted.

  9. Crafting consensus

    Czech Academy of Sciences Publication Activity Database

    Zápal, Jan

    2017-01-01

    Roč. 173, 1–2 (2017), s. 169-200 ISSN 0048-5829 R&D Projects: GA ČR(CZ) GP14-27902P Institutional support: Progres-Q24 Keywords : consensus building * agenda setting * vote buying Subject RIV: AH - Economics OBOR OECD: Economic Theory Impact factor: 0.788, year: 2016

  10. Job crafting

    NARCIS (Netherlands)

    Demerouti, E.; Bakker, A.B.; Peeters, M.; Jonge, de J.; Taris, T.

    2014-01-01

    The increasing popularity of self-managing teams, re-engineering and other organizational innovations, coupled with the increased flexibility in work arrangements made possible by advances in information technology, has considerably expanded the complexity of professional jobs. Consequently, each

  11. Crafting tolerance

    DEFF Research Database (Denmark)

    Kirchner, Antje; Freitag, Markus; Rapp, Carolin

    2011-01-01

    Ongoing changes in social structures, orientation, and value systems confront us with the growing necessity to address and understand transforming patterns of tolerance as well as specific aspects, such as social tolerance. Based on hierarchical analyses of the latest World Values Survey (2005......–08) and national statistics for 28 countries, we assess both individual and contextual aspects that influence an individual's perception of different social groupings. Using a social tolerance index that captures personal attitudes toward these groupings, we present an institutional theory of social tolerance. Our...

  12. The Occurrence of Beer Spoilage Lactic Acid Bacteria in Craft Beer Production.

    Science.gov (United States)

    Garofalo, Cristiana; Osimani, Andrea; Milanović, Vesna; Taccari, Manuela; Aquilanti, Lucia; Clementi, Francesca

    2015-12-01

    Beer is one of the world's most ancient and widely consumed fermented alcoholic beverages produced with water, malted cereal grains (generally barley and wheat), hops, and yeast. Beer is considered an unfavorable substrate of growth for many microorganisms, however, there are a limited number of bacteria and yeasts, which are capable of growth and may spoil beer especially if it is not pasteurized or sterile-filtered as craft beer. The aim of this research study was to track beer spoilage lactic acid bacteria (LAB) inside a brewery and during the craft beer production process. To that end, indoor air and work surface samples, collected in the brewery under study, together with commercial active dry yeasts, exhausted yeasts, yeast pellet (obtained after mature beer centrifugation), and spoiled beers were analyzed through culture-dependent methods and PCR-DGGE in order to identify the contaminant LAB species and the source of contamination. Lactobacillus brevis was detected in a spoiled beer and in a commercial active dry yeast. Other LAB species and bacteria ascribed to Staphylococcus sp., Enterobaceriaceae, and Acetobacter sp. were found in the brewery. In conclusion, the PCR-DGGE technique coupled with the culture-dependent method was found to be a useful tool for identifying the beer spoilage bacteria and the source of contamination. The analyses carried out on raw materials, by-products, final products, and the brewery were useful for implementing a sanitization plan to be adopted in the production plant. © 2015 Institute of Food Technologists®

  13. Editorial. Yes, Please - Both Crafts and Digital Tools in Basic Education

    Directory of Open Access Journals (Sweden)

    Liv Merete Nielsen

    2014-12-01

    Full Text Available The Ludvigsen Committee (Ludvigsen-utvalget, which aims to assess primary and secondary educational subjects in terms of the competence Norwegian society and its working life will need in the future, has published an interim report entitled Pupils’ Learning in the School of the Future – A Knowledge Foundation (Norwegian Ministry of Education and Research, 2014. The committee wrote the following about arts and crafts: “That subject will contribute to personal development and simultaneously strengthen opportunities to participate in a democratic society, which can be seen as a desire to protect both individual-oriented and community-oriented training. The breadth of the subject can restrict the ability to delve into individual topics” (NOU 2014: 7, 2014, p. 89, our translation from Norwegian. This will be an important challenge for the team in the near future. The committee shall submit their principal report by June 2015.Practical work with materials must not be removed from primary school. It should be required that qualified teachers are employed on the lower grades. Practical/hands-on work can give the trades a boost, encourage students to choose vocations and prevent dropouts in vocational education programmes. We need skilled craftsmen in the future, and good teaching in Arts & Crafts in compulsory education could provide an important basis for both future craftsmen and customers of good craftsmen.

  14. Use of Job Task Analysis (JTA) in the development of craft training programs

    International Nuclear Information System (INIS)

    Gonyeau, J.A.; Long, R.E.

    1985-01-01

    Northern States Power Company is making a major effort to develop performance based training. It is finding the use of JTA data very helpful in the revision of its maintenance craft training programs. The technique being used involves a group of interns from the Training and Development Program of the University of Minnesota. These interns are largely graduate students, but with no nuclear and little mechanical/electrical experience. A Job Analysis for each discipline was used to: guide the following task analysis, determine program content, evaluate existing OJT check lists, and to define the four crafts used for mechanical maintenance. From the Job Analysis, a Training Task List was developed and correlated to training materials. The analysis of the tasks on the Training Task List is proceeding. Taxonomies of systems or subjects are compared to existing lesson plans. These taxonomies are useful when writing new lesson plans. The taxonomies are an excellent start for the development of enabling objectives. A Nine-Step Plan is being followed in the application of JTA data to the development and refinement of performance based training

  15. 21 CFR 866.4540 - Immunonephelometer equipment.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents § 866.4540 Immunonephelometer equipment. (a) Identification. Immunonephelometer equipment for clinical use...

  16. 21 CFR 866.4520 - Immunofluorometer equipment.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents § 866.4520 Immunofluorometer equipment. (a) Identification. Immunofluorometer equipment for clinical use with...

  17. An Enquiry into Primary Student Teachers' Confidence, Feelings and Attitudes towards Teaching Arts and Crafts in Finland and Malta during Initial Teacher Training

    Science.gov (United States)

    Gatt, Isabelle; Karppinen, Seija

    2014-01-01

    Arts and crafts are connected with a variety of emotions, and the prospect of teaching these subjects could be a source of other emotions, not necessarily positive. This study explores the feelings and attitudes of student teachers towards arts and crafts prior to any training within their degree course and examines any changes that occur…

  18. Equipment standards for interventional cardiology

    International Nuclear Information System (INIS)

    Dowling, A.; Gallagher, A.; Walsh, C.; Malone, J.

    2005-01-01

    Interventional radiology has seen rapid growth in cardiology and represents an alternative to hazardous surgery. Recently there has been a substantial growth in the number of procedures being performed and interventional cardiology (IC) procedures are the most common interventional procedures in Europe. Advances in imaging technology have facilitated the development of increasingly complex radiological IC equipment. Currently, the technology is developing at a rate ahead of supporting research, equipment standards and a regulatory framework. International standards play a key role in the design, manufacture and performance of radiological IC equipment. A survey of 12 IC systems (15 imaging chains) was conducted in Irish hospitals. The aim of the study was to assess the imbalance between rapidly advancing technology and existing standards and to propose recommendations for new IC equipment standards. The results demonstrate the need for definitive equipment requirements and standardisation in the design, manufacture, acceptance and maintenance of IC equipment. (authors)

  19. Generation of equipment response spectrum considering equipment-structure interaction

    International Nuclear Information System (INIS)

    Lee, Sang Hoon; Yoo, Kwang Hoon

    2005-01-01

    Floor response spectra for dynamic response of subsystem such as equipment, or piping in nuclear power plant are usually generated without considering dynamic interaction between main structure and subsystem. Since the dynamic structural response generally has the narrow-banded shapes, the resulting floor response spectra developed for various locations in the structure usually have high spectral peak amplitudes in the narrow frequency bands corresponding to the natural frequencies of the structural system. The application of such spectra for design of subsystems often leads to excessive design conservatisms, especially when the equipment frequency and structure are at resonance condition. Thus, in order to provide a rational and realistic design input for dynamic analysis and design of equipment, dynamic equipment-structure interaction (ESI) should be considered in developing equipment response spectrum which is particularly important for equipment at the resonance condition. Many analytical methods have been proposed in the past for developing equipment response spectra considering ESI. However, most of these methods have not been adapted to the practical applications because of either the complexities or the lack of rigorousness of the methods. At one hand, mass ratio among the equipment and structure was used as an important parameter to obtain equipment response spectra. Similarly, Tseng has also proposed the analytical method for developing equipment response spectra using mass ratio in the frequency domain. This method is analytically rigorous and can be easily validated. It is based on the dynamic substructuring method as applied to the dynamic soil-structure interaction (SSI) analysis, and can relatively easily be implemented for practical applications without to change the current dynamic analysis and design practice for subsystems. The equipment response spectra derived in this study are also based on Tseng's proposed method

  20. Network survivability performance

    Science.gov (United States)

    1993-11-01

    This technical report has been developed to address the survivability of telecommunications networks including services. It responds to the need for a common understanding of, and assessment techniques for network survivability, availability, integrity, and reliability. It provides a basis for designing and operating telecommunications networks to user expectations for network survivability and a foundation for continuing industry activities in the subject area. This report focuses on the survivability of both public and private networks and covers a wide range of users. Two frameworks are established for quantifying and categorizing service outages, and for classifying network survivability techniques and measures. The performance of the network survivability techniques is considered; however, recommended objectives are not established for network survivability performance.

  1. Overall Equipment Effectiveness Implementation Criteria

    Science.gov (United States)

    Abramova, I. G.; Abramov, D. A.

    2018-01-01

    This article documents the methods applied in production control technics specifically focused on commonly used parameter OEE (Overall Equipment Effectiveness). The indicators of extensive and intensive use of equipment are considered. Their appointment this is comparison in the same type of production within the industry and comparison of single-type and / or different types of equipment in terms of capacity. However, it is shown that there is no possibility of revealing the reasons for the machine’s operation: productive / unproductive, with disturbances. Therefore, in the article reveals the approaches to calculating the indicator characterizing the direct operation of the equipment. The Machine Load coefficient is approaching closely to the indicator of the efficiency of the use of equipment. Methods analysis is proceeded through the historically applied techniques such as “Stopwatch” and “Motion” studies. Was performed the analysis of the efficiency index of OEE equipment using the comparable indexes performance of equipment in the Russian practice. An important indicator of OEE contains three components. The meaning of each of them reflects historically applicable indicators. The value of the availability of equipment indicator is close to the value of the equipment extensibility index. The value of the indicator of the efficiency of work can be compared with the characteristic of the capacity of the equipment and the indicator of the quality level can meet the requirements for compliance with the manufacturing technology. Shown that the sum of the values of the coefficient of “Availability” of the equipment and the value of the “Factor of compaction of working hours” are one. As well as the total value of the indicator “level of quality” and the coefficient of marriage given in the result unit. The measurability of the indicators makes it possible to make a prediction about efficiency of the equipment.

  2. Information technology equipment cooling system

    Science.gov (United States)

    Schultz, Mark D.

    2014-06-10

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

  3. Management methodology for pressure equipment

    Science.gov (United States)

    Bletchly, P. J.

    Pressure equipment constitutes a significant investment in capital and a major proportion of potential high-risk plant in many operations and this is particularly so in an alumina refinery. In many jurisdictions pressure equipment is also subject to statutory regulation that imposes obligations on Owners of the equipment with respect to workplace safety. Most modern technical standards and industry codes of practice employ a risk-based approach to support better decision making with respect to pressure equipment. For a management system to be effective it must demonstrate that risk is being managed within acceptable limits.

  4. Cryogenic equipment; Materiel cryogenique

    Energy Technology Data Exchange (ETDEWEB)

    Leger, L; Javellaud, J; Caro, C; Gilguy, R; Testard, O

    1966-06-01

    The cryostats presented here were built from standard parts; this makes it possible to construct a great variety of apparatus at minimum cost. The liquid nitrogen and helium reservoirs were designed so as to reduce losses to a minimum, and so as to make the cryostats as autonomous as possible. The experimental enclosure which is generally placed in the lower part of the apparatus requires a separate study in every case. Furthermore, complete assemblies such as transfer rods, isolated traps and high vacuum valves, were designed with a similar regard for the economic aspects and for the need for standardization. This equipment thus satisfies a great variety of experimental needs; it is readily adaptable and the consumptions of helium and liquid nitrogen are very low. (authors) [French] De nombreuses experiences utilisant les basses temperatures, necessitent l'emploi d'un materiel cryogenique complexe n'existant pas dans le commerce. Les cryostats presentes ici ont ete realises a partir d'elements standard, ce qui permet, malgre la diversite des appareils, de realiser un ensemble a moindre frais. Les reservoirs d'azote et d'helium liquides ont ete concus de facon a limiter les pertes et a conferer au cryostat la plus grande autonomie possible. L'enceinte experimentale situee en general dans la partie inferieure de l'appareil necessite dans tous les cas une etude speciale. D'autre part des ensembles complets tels que les cannes de transfert, piege isole, robinet pour vide secondaire, ont ete concus dans le meme souci de rentabilite et de standardisation. Ce materiel peut donc repondre a un grand nombre d'exigences experimentales, il est facilement adaptable, et les consommations d'helium et d'azote liquide sont tres reduites. (auteurs)

  5. 29 CFR 1926.952 - Mechanical equipment.

    Science.gov (United States)

    2010-07-01

    ... equipment that are not covered with insulating protective equipment. (c) Derrick trucks, cranes and other lifting equipment. (1) All derrick trucks, cranes and other lifting equipment shall comply with subpart N...

  6. 22 CFR 135.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  7. 21 CFR 1403.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  8. 45 CFR 602.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  9. 49 CFR 18.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  10. 34 CFR 80.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  11. 10 CFR 600.232 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  12. 45 CFR 1183.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  13. Noble gas control room accident filtration system for severe accident conditions N-CRAFT. System design

    International Nuclear Information System (INIS)

    Hill, Axel

    2014-01-01

    Severe accidents might cause the release of airborne radioactive substances to the environment of the NPP. This can either be due to leakages of the containment or due to a filtered containment venting in order to ensure the overall integrity of the containment. During the containment venting process aerosols and iodine can be retained by the FCVS which prevents long term ground contamination. Noble gases are not retainable by the FCVS. From this it follows that a large amount of radioactive noble gases (e.g. xenon, krypton) might be present in the nearby environment of the plant dominating the activity release, depending on the venting procedure and the weather conditions. Accident management measures are necessary in case of severe accidents and the prolonged stay of staff inside the main control room (MCR) or emergency response center (ERC) is essential. Therefore, the in leakage and contamination of the MRC and ERC with airborne activity has to be prevented. The radiation exposure of the crises team needs to be minimized. The entrance of noble gases cannot be sufficiently prevented by the conventional air filtration systems such as HEPA filters and iodine absorbers. With the objective to prevent an unacceptable contamination of the MCR/ERC atmosphere by noble gases AREVA GmbH has developed a noble gas retention system. The noble gas control room accident filtration system CRAFT is designed for this case and provides supply of fresh air to the MCR/ERC without time limitation. The retention process of the system is based on the dynamic adsorption of noble gases on activated carbon. The system consists of delay lines (carbon columns) which are operated by a continuous and simultaneous adsorption and desorption process. These cycles ensure a periodic load and flushing of the delay lines retaining the noble gases from entering the MCR. CRAFT allows a minimization of the dose rate inside MCR/ERC and ensures a low radiation exposure to the staff on shift maintaining

  14. A Probabilistic and Observation Based Methodology to Estimate Small Craft Harbor Vulnerability to Tsunami Events

    Science.gov (United States)

    Keen, A. S.; Lynett, P. J.; Ayca, A.

    2016-12-01

    Because of the damage resulting from the 2010 Chile and 2011 Japanese tele-tsunamis, the tsunami risk to the small craft marinas in California has become an important concern. The talk will outline an assessment tool which can be used to assess the tsunami hazard to small craft harbors. The methodology is based on the demand and structural capacity of the floating dock system, composed of floating docks/fingers and moored vessels. The structural demand is determined using a Monte Carlo methodology. Monte Carlo methodology is a probabilistic computational tool where the governing might be well known, but the independent variables of the input (demand) as well as the resisting structural components (capacity) may not be completely known. The Monte Carlo approach uses a distribution of each variable, and then uses that random variable within the described parameters, to generate a single computation. The process then repeats hundreds or thousands of times. The numerical model "Method of Splitting Tsunamis" (MOST) has been used to determine the inputs for the small craft harbors within California. Hydrodynamic model results of current speed, direction and surface elevation were incorporated via the drag equations to provide the bases of the demand term. To determine the capacities, an inspection program was developed to identify common features of structural components. A total of six harbors have been inspected ranging from Crescent City in Northern California to Oceanside Harbor in Southern California. Results from the inspection program were used to develop component capacity tables which incorporated the basic specifications of each component (e.g. bolt size and configuration) and a reduction factor (which accounts for the component reduction in capacity with age) to estimate in situ capacities. Like the demand term, these capacities are added probabilistically into the model. To date the model has been applied to Santa Cruz Harbor as well as Noyo River. Once

  15. Food Service Equipment and Appurtenances.

    Science.gov (United States)

    National Sanitation Foundation, Ann Arbor, MI.

    Equipment design specifications are presented relating to tables of all kinds, counters, sinks and drainboards, bins, shelves, drawers, hoods and similar kitchen appurtenances, not including baking, roasting, toasting, broiling or frying equipment, food preparation machinery such as slicers, choppers, and cutters, mixers and grinders, steam…

  16. Multinationals and plant survival

    DEFF Research Database (Denmark)

    Bandick, Roger

    2010-01-01

    The aim of this paper is twofold: first, to investigate how different ownership structures affect plant survival, and second, to analyze how the presence of foreign multinational enterprises (MNEs) affects domestic plants’ survival. Using a unique and detailed data set on the Swedish manufacturing...... sector, I am able to separate plants into those owned by foreign MNEs, domestic MNEs, exporting non-MNEs, and purely domestic firms. In line with previous findings, the result, when conditioned on other factors affecting survival, shows that foreign MNE plants have lower survival rates than non......-MNE plants. However, separating the non-MNEs into exporters and non-exporters, the result shows that foreign MNE plants have higher survival rates than non-exporting non-MNEs, while the survival rates of foreign MNE plants and exporting non-MNE plants do not seem to differ. Moreover, the simple non...

  17. Equipe de trabalho

    Directory of Open Access Journals (Sweden)

    Gabriel Gerber Hornink

    2014-08-01

    Full Text Available   Equipe de Trabalho 2014 1. Equipe editorial Editor-Chefe Bayardo Bapstista Torres, Instituto de Química - USP, Brasil Eduardo Galembeck, Departamento de Bioquímica Instituto de Biologia UNICAMP, Brasil   Editores Gabriel Gerber Hornink, Depto. Bioquímica, Instituto de Ciências Biomédicas, Universidade - Federal de Alfenas - Unifal-MG, Brasil Vera Maria Treis Trindade, Instituto de Ciências Básicas da Saúde, Departamento de Bioquímica, Universidade Federal do Rio Grande do Sul, Brasil   Corpo Editorial Adriana Cassina, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Angel Herráez, Departamento de Bioquímica y Biología molecular, Universidad de Alcalá de Henares, Madrid, Espanha André Amaral Gonçalves Bianco, Universidade Federal de São Paulo (Unifesp, Brasil Denise Vaz de Macedo, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Eneida de Paula, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Guilherme Andrade Marson, Instituto de Química - USP, Brasil Jose Antonio Martinez Oyanedel, Universidad de Concepción, Chile Josep Maria Fernández Novell, Dept. Bioquímica i Biologia Molecular Universitat de Barcelona, Espanha Leila Maria Beltramini, Instituto de Física de São Carlos, Universidade Estadual de São Paulo - USP, Brasil Manuel João da Costa, Escola de Ciências da Saúde, Universidade do Minho, Portugal Maria Lucia Bianconi, Instituto de Bioquímica Médica Universidade Federal do Rio de Janeiro (UFRJ, Brasil María Noel Alvarez, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Miguel Ángel Medina Torres, Department of Molecular Biology & Biochemistry Faculty of Sciences University of Málaga, Espanha Nelma Regina Segnini Bossolan, Instituto de Física de São Carlos, Universidade de São Paulo - USP, Brasil Paulo De Avila

  18. A Study of Student Interaction in an Online Learning Environment Specially Crafted for Cross-Level Peer Mentoring

    Science.gov (United States)

    Ruane, Regina

    2012-01-01

    This study explored the ways that students in an online teacher education program connected in a specially crafted peer mentoring program developed for cross-level peer mentoring. Program administrators developed the peer mentoring site in response to observations that enrolled students, particularly new students, were often unsure of how to…

  19. Uncovering Procedural Knowledge in Craft, Design, and Technology Education: A Case of Hands-On Activities in Electronics

    Science.gov (United States)

    Pirttimaa, Matti; Husu, Jukka; Metsärinne, Mika

    2017-01-01

    Different knowledge types have their own specific features and tasks in the learning process. Procedural knowledge is used in craft and technology education when students solve problems individually and share their working knowledge with others. This study presents a detailed analysis of a one student's learning process in technology education and…

  20. Indium triflate in 1-isobutyl-3-methylimidazolium dihydrogenphosphate: an efficient and green catalytic system for Friedel-Crafts acylation

    DEFF Research Database (Denmark)

    Tran, Phuong Hoang; Hoang, Huy Manh; Chau, Duy-Khiem Nguyen

    2015-01-01

    Indium triflate in the ionic liquid, 1-isobutyl-3-methylimidazolium dihydrogen phosphate ([i-BMIM]H2PO4), was found to show enhanced catalytic activity in the Friedel–Crafts acylation of various aromatic compounds with acid anhydrides. The catalytic system was easily recovered and reused without...

  1. Job Crafting and Identity in Low-Grade Work: How Hospital Porters Redefine the Value of Their Work and Expertise

    Science.gov (United States)

    Fuller, Alison; Unwin, Lorna

    2017-01-01

    Over 25 years ago, Brown and Duguid ("Organisation Science," 2(1), 40-57, 1991) highlighted the differences between the way organisations formally describe and delineate jobs and the actual practices of their employees. This paper combines ideas from their seminal contribution with theories of "job crafting" and identity to…

  2. Crafting traps with attractant alcoholics an alternative for monitoring and control of borer coffee, Hypothenemus hampei (Ferrari 1867

    Directory of Open Access Journals (Sweden)

    Agramont Richard

    2010-10-01

    Full Text Available The necessity to incorporate an alternative, for monitoring and control of the borer coffee, Hypothenemus hampei (Ferrari (Choleoptera: Curculionidae to be feasible for the use of the coffee producers, in the community Choro, Coripata municipality, second section of Nor Yungas province, La Paz Bolivia. It was evaluated the capture of adult borer coffee individuals using 45 traps into 1,5 hectares distributed at random with four repetitions. It was used three types of craft traps, built with disposable plastic bottles of soft drinks, with the traps Casera, Brocap and Yessica, were evaluated three treatments: mixture of alcohols methyl (M and ethylic (E in proportions 3:1; mix 1:1 of (M and (E; mix 1:1:1 of (M (E and coffee fresh cherry liquated (CFCL and water as a witness. The largest captures of adult individuals, were present in the crafting traps with mixture of (M(E 3:1 with overalls (± standard deviation adults/traps/ten days of 3414,5±3227,7 being superior to the other treatments. The crafting trap is one of the alternatives for the control and monitoring of the borer in the coffee plantations. The use of crafting traps with alcoholic attractants for the capture of adult individuals, is present as a low cost alternative, being feasible the successful use by the producers into the management integrated programs.

  3. Erbium trifluoromethanesulfonate-catalyzed Friedel–Crafts acylation using aromatic carboxylic acids as acylating agents under monomode-microwave irradiation

    DEFF Research Database (Denmark)

    Tran, Phuong Hoang; Hansen, Poul Erik; Nguyen, Hai Truong

    2015-01-01

    Erbium trifluoromethanesulfonate is found to be a good catalyst for the Friedel–Crafts acylation of arenes containing electron-donating substituents using aromatic carboxylic acids as the acylating agents under microwave irradiation. An effective, rapid and waste-free method allows the preparation...... of a wide range of aryl ketones in good yields and in short reaction times with minimum amounts of waste...

  4. Friedel-Crafts Alkylation of o-xylene over V2O5/ZrO2 Catalysts

    CSIR Research Space (South Africa)

    Kesavan Pillai, Sreejarani

    2012-01-01

    Full Text Available The present study has undertaken the Friedel-Crafts benzylation of aromatics over the V2O5/ZrO2 catalysts systems. Catalysts with different V2O5 content (0-15wt %) was prepared by wet impregnation method and characterized by XRD, BET surface area...

  5. 77 FR 31642 - Hawker Beech Craft Defense Company, LLC, Also Known As Hawker Beechcraft Corporation, Also Known...

    Science.gov (United States)

    2012-05-29

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,901] Hawker Beech Craft Defense Company, LLC, Also Known As Hawker Beechcraft Corporation, Also Known As Hawker Beechcraft International SVC, Also Known As Rapid Surplus Parts, Also Known As Hawker Beechcraft Svcs, Also Known As Travel...

  6. 32 CFR 700.871 - Responsibility for safety of ships and craft at a naval station or shipyard.

    Science.gov (United States)

    2010-07-01

    ... a timely and adequate manner. (c) When a ship or craft not under her own power is being moved by... contractor. (d) When a ship operating under her own power is being drydocked, the commanding officer shall be... ship. (e) When a naval ship is to be drydocked in a private shipyard under a contract being...

  7. Cu(I)-Catalyzed Enantioselective Friedel-Crafts Alkylation of Indoles with 2-Aryl-N-sulfonylaziridines as Alkylating Agents.

    Science.gov (United States)

    Ge, Chen; Liu, Ren-Rong; Gao, Jian-Rong; Jia, Yi-Xia

    2016-07-01

    A highly enantioselective Friedel-Crafts alkylation of indoles with N-sulfonylaziridines as alkylating agents has been developed by utilizing the complex of Cu(CH3CN)4BF4/(S)-Segphos as a catalyst. A range of optically active tryptamine derivatives are obtained in good to excellent yields and enantioselectivities (up to >99% ee) via a kinetic resolution process.

  8. An efficient and green synthesis of 1-indanone and 1-tetralone via intramolecular Friedel-Crafts acylation reaction

    DEFF Research Database (Denmark)

    Tran, Phuong Hoang; Huynh, Vy Hieu; Hansen, Poul Erik

    2015-01-01

    Metal-triflate-catalyzed intramolecular Friedel–Crafts acylation of 3-arylpropanoic and 4-arylbutanoic acids in triflate-anion ionic liquids under monomodal microwave irradiation is reported. The environmentally benign synthetic procedure allows the formation of cyclic ketones in good yields with...

  9. Can job crafting reduce job boredom and increase work engagement? A three-year cross-lagged panel study

    NARCIS (Netherlands)

    Harju, Lotta K.; Hakanen, Jari J.; Schaufeli, Wilmar B.|info:eu-repo/dai/nl/073779563

    2016-01-01

    Building upon the Conservation of Resources (COR) theory, this longitudinal study examined whether job crafting behaviors (i.e. increasing structural and social job resources and increasing challenges) predict less job boredom and more work engagement. We also tested the reverse causation effects of

  10. Supporting Creativity in Craft Brewing: A Case Study of iPhone Use in the Transition from Novice towards Mastery

    Science.gov (United States)

    Wright, Steve; Short, Ben; Parchoma, Gale

    2013-01-01

    This paper presents a case-study of an individual engaged in the practice of craft brewing and the ways in which his use of a mobile device has supported the informal learning underpinning his transition from novice towards mastery. Through participant observation, online ethnographic methods and interview data the authors present a description of…

  11. Developing Craft Skills with Quasi-Cases: The Example of the Big Apple's Flirtation with Congestion Pricing

    Science.gov (United States)

    Straussman, Jeffrey D.

    2015-01-01

    This article adopts the perspective expounded by Weimer, and Vining and Weimer, that policy analysis requires "craft skills" and, therefore, one of the fundamental objectives of public affairs programs is to prepare graduates for the professional working world by providing opportunities to learn and practice these skills. Second, the…

  12. DNA-Accelerated Copper Catalysis of Friedel-Crafts Conjugate Addition/Enantioselective Protonation Reactions in Water

    NARCIS (Netherlands)

    García-Fernández, Almudena; Megens, Rik P.; Villarino, Lara; Roelfes, Gerard

    2016-01-01

    DNA-induced rate acceleration has been identified as one of the key elements for the success of the DNA-based catalysis concept. Here we report on a novel DNA-based catalytic Friedel-Crafts conjugate addition/enantioselective protonation reaction in water, which represents the first example of a

  13. “Not a Vacation, But a Hardening Process”: The Self-Empowerment Work of Therapeutic Craft in Nova Scotia

    Directory of Open Access Journals (Sweden)

    Erin Morton

    2014-10-01

    Full Text Available This article will examine the development of a state-sponsored therapeutic craft regime in Nova Scotia in the early to mid-twentieth century. Built on the notion that postwar residents needed "work therapy - not a vacation, but a hardening process" (Black n.d. a: 3 - therapeutic craft emerged in Nova Scotia through a complex combination of the individualization of work habits, the desire to construct an antimodern regional identity around handwork, and the notion that both infirm patients and the province as a whole could be healed from economic stagnation through craft. Key to the success of Nova Scotia's therapeutic craft regime was occupational therapist Mary E. Black's career as director of the provincial government's Handicrafts and Home Industries Division from 1943 to 1955. Black's healthcare training led her to seek out therapeutic possibilities in everyday work activities, not to mention a therapeutic solution to what she called "the atti-tude of most Nova Scotians"[:] defeatism" (Black 1949: 46. Her ability to turn seemingly disparate things - such as Scandinavian design, the ordered work of occupational rehabilitation, and a phenomenological focus on what she called “in-dividualistic existence” (Black n.d. b: 2 - into a unified therapeutic solution demonstrates that the contemporary rise of therapeutic culture under the increased individualism of the neoliberal era has an established historical root in the postwar period that remains important to understand.

  14. Information technology equipment cooling method

    Science.gov (United States)

    Schultz, Mark D.

    2015-10-20

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools air utilized by the rack of information technology equipment to cool the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat generated by the rack of information technology equipment.

  15. Socio-economic Classification and its Scope in Crafting Rural Segments

    Directory of Open Access Journals (Sweden)

    Rinalini Pathak Kakati

    2015-12-01

    Full Text Available With the liberalization of the Indian Economy in the mid 1990’s, substantial growth has been seen in the rural areas. Rural India which comprises around 70% of the total population of the country has become an emerging area for marketers. This study tries to identify key market variables that can help in crafting rural market segments. The socio-economic classification (SEC 2011 which segments the market based on education level and possession of consumer durables. This study examines income as another key market variable together with education in the creation of distinct segments or hybrid segments. It then further identifies important criteria like technical, promotional and social in influencing consumers’ behaviour in the context of the purchase of consumer durables which can thereby help to create segments. The study concludes that the increase in education level has higher impact than increase in income on the important identified purchase criteria.

  16. "Slow food" post-qualitative research in psychology: old craft skills in new disguise?

    Science.gov (United States)

    Demuth, Carolin

    2015-06-01

    The present paper addresses several aspects discussed in the special issue on the future of qualitative research in psychology. Particularly, it asks whether in light of the overhomogenization of the term "qualitative methods" researchers actually can still assume that they talk about the same thing when using this terminology. In addressing the topic of what constitutes the object of psychological research and what accordingly could be a genuinely psychological qualitative research it acknowledges the need to return to the study of persons' unique experience. In light of the risk of "McDonaldization" in present qualitative research, it argues that we need to return to learning research methods as craft skills. It will then give an outlook on how recent developments in discursive and narrative psychology offer a fruitful avenue for studying unique psychological experience as people manage to 'move on' in a material world and in irreversible time.

  17. Cosmogonic Perceptions in the Armenian Traditional Musical Instrument-crafting Culture

    Science.gov (United States)

    Pikichian, Hripsime

    2015-07-01

    Based on research data and materials recorded by folk musicians and craftsmen, the article presents the musical instrument-crafting in traditional culture, its contribution in to re-establishment of cosmic order. In this context, the several issues are reviewed in detail: individuality of craftsmen and musicians, the raw materials for the creation of instrument, the instrument structure, the manufacturing process, the ornaments and application. According to the traditional view, using the elements of nature and imitating the sounds of nature and human psychological states the master imitates God repeating the process of creation of the Universe. So, the Instrument is held capable to influence the society contributing to the eternity of life.

  18. Urban networks and Arctic outlands: Craft specialists and reindeer antler in Viking towns

    DEFF Research Database (Denmark)

    Ashby, Steven P.; Coutu, Ashley N.; Sindbæk, Søren Michael

    2015-01-01

    This paper presents the results of the use of a minimally destructive biomolecular technique to explore the resource networks behind one of the first specialized urban crafts in early mediaeval northern Europe: the manufacture of composite combs of deer antler. The research incorporates the largest...... the 780s ad at the latest, presenting the earliest unambiguous evidence for exchange-links between urban markets in the southern North Sea region and the Scandinavian Peninsula. The results demonstrate that the common conceptual distinction between urban hinterlands and long-distance trade conceals...... a vital continuity. Long-range networks were vital to urban activities from the first appearance of towns in this part of the world, preceding the historically documented maritime expansion of the Viking Age. We consequently suggest that urbanism is more appropriately defined and researched in terms...

  19. Modeling Ships and Space Craft The Science and Art of Mastering the Oceans and Sky

    CERN Document Server

    Hagler, Gina

    2013-01-01

    Modeling Ships and Space Craft: The Science and Art of Mastering the Oceans and Sky begins with the theories of Aristotle and Archimedes, moving on to examine the work of Froude and Taylor, the early aviators and the Wright Brothers, Goddard and the other rocket men, and the computational fluid dynamic models of our time. It examines the ways each used fluid dynamic principles in the design of their vessels. In the process, this book covers the history of hydrodynamic (aero and fluid) theory and its progression – with some very accessible science examples – including seminal theories. Hydrodynamic principles in action are also explored with examples from nature and the works of man. This is a book for anyone interested in the history of technology – specifically the methods and science behind the use of scale models and hydrodynamic principles in the marine and aeronautical designs of today.

  20. Free Software Beyond Radical Politics: Negotiations of Creative and Craft Autonomy in Digital Visual Media Production

    Directory of Open Access Journals (Sweden)

    Julia Velkova

    2016-08-01

    Full Text Available Free software development and the technological practices of hackers have been broadly recognised as fundamental for the formation of political cultures that foster democracy in the digital mediascape. This article explores the role of free software in the practices of digital artists, animators and technicians who work in various roles for the contemporary digital visual media industries. Rather than discussing it as a model of organising work, the study conceives free software as a production tool and shows how it becomes a locus of politics about finding material security in flexible capitalism. This politics is ultimately contradictory in that it extends creative and craft autonomy of digital artists but does not mobilise a critical project. Instead, it nurtures further precarious labour. Empirically, the article draws on ethnographically collected material from the media practices of digital artists and programmers who engage with two popular free software production tools, Blender and Synfig.

  1. 3D printing as a Ceramic Craft Tool in Its Own Right

    DEFF Research Database (Denmark)

    Hansen, Flemming Tvede; Falin, Priska

    2016-01-01

    In April 2016, four universities met for one week at the KAHLA Porcelain Factory to discuss the future of ceramics and, through workshops, explore the theme »shaping the future«. One of the workshops was focusing on 3D printing in clay and the concept of material driven 3D printing in clay....... This article reports from and reflects on the experiments and discussions in this workshop and concentrates on 3D printing in clay from the perspective of studio practice in art and design. The main point of interest is in examining how a technology such as 3D printing can be utilised and seen as a new ceramic...... craft tool in its own right and how 3D printed ceramics can also be considered as handmade objects....

  2. Makeshift Modernity. DIY, Craft and the Virtuous Homemaker in New Soviet Housing of the 1960s

    Directory of Open Access Journals (Sweden)

    Susan E. Reid

    2014-11-01

    Full Text Available In cities across the Soviet Union in the late 1950s and early 1960s, new housing developments of plain five-storey apartment blocks mushroomed thanks to an intensive programme for mass industrialised housing construction launched by the Party-State in 1957. Modern living conditions were to be created for millions, it was promised, through state planning and investment in the modernisation of construction, making maximum use of technology and factory prefabrication in place of bricklaying and other artisanal methods. Drawing on oral history and material culture, this article attends to some contradictory, seemingly unplanned and un-modern aspectsof popular agency entailed in producing the modern Soviet environment, including the role of local improvisation, DIY and manual craft. These were not necessarily resistant to or subversive of the socialist state's modernisationproject but had a more complex and ambivalent relation to it, as complementary or compensatory accommodations that"tuned" universal modelsto local contingency.

  3. Data-fusion for multiplatform characterization of an italian craft beer aimed at its authentication

    Energy Technology Data Exchange (ETDEWEB)

    Biancolillo, Alessandra; Bucci, Remo; Magrì, Antonio L.; Magrì, Andrea D.; Marini, Federico, E-mail: fmmonet@hotmail.com

    2014-04-01

    Highlights: • Characterization of beer samples by five different fingerprinting techniques. • Chemometric discriminant and class-modeling techniques used for their authentication. • Mid-level data fusion allowed correct classification of all samples. - Abstract: Five different instrumental techniques: thermogravimetry, mid-infrared, near-infrared, ultra-violet and visible spectroscopies, have been used to characterize a high quality beer (Reale) from an Italian craft brewery (Birra del Borgo) and to differentiate it from other competing and lower quality products. Chemometric classification models were built on the separate blocks using soft independent modeling of class analogies (SIMCA) and partial least squares-discriminant analysis (PLS-DA) obtaining good predictive ability on an external test set (75% or higher depending on the technique). The use of data fusion strategies – in particular, the mid-level one – to integrate the data from the different platforms allowed the correct classification of all the training and validation samples.

  4. Energy spectrum of iron nuclei measured inside the MIR space craft using CR-39 track detectors

    International Nuclear Information System (INIS)

    Guenther, W.; Leugner, D.; Becker, E.; Flesch, F.; Heinrich, W.; Huentrup, G.; Reitz, G.; Roecher, H.; Streibel, T.

    1999-01-01

    We have exposed stacks of CR-39 plastic nuclear track detectors inside the MIR space craft during the EUROMIR95 space mission for almost 6 months. Over this long period a large number of tracks of high LET events was accumulated in the detector foils. The etching and measuring conditions for this experiment were optimized to detect tracks of stopping iron nuclei. We found 185 stopping iron nuclei inside the stack and identified their trajectories through the material of the experiment. Based on the energy-range relation the energy at the surface of the stack was determined. These particles allow the determination of the low energy part of the spectrum of iron nuclei behind shielding material inside the MIR station

  5. Effects of stern-foil submerged elevation on the lift and drag of a hydrofoil craft

    Science.gov (United States)

    Suastika, K.; Apriansyah

    2018-03-01

    Effects of the stern-foil submerged elevation on the lift and drag of a hydrofoil craft are studied by using computational fluid dynamics (CFD) and by considering three alternative stern-foil submerged elevations. The submerged elevation of the front foil is kept constant in all the alternatives. From among the alternatives, the deepest stern-foil placement results in the highest stern-foil lift with the highest foil’s lift-to-drag ratio. However, considering the lift-to-drag ratio of the whole foil-strut-hull system, the shallowest stern-foil placement results in the highest lift-to-drag ratio. The struts and the foil’s submerged elevation significantly affects the drag of the whole foil-strut-hull system.

  6. Cervecería Artesanal, Mela`s Craft Beer : trabajo de Grado en emprendimiento

    OpenAIRE

    Manotas, Eduardo Alejandro

    2017-01-01

    En Colombia, el consumo de cerveza viene creciendo a pasos agigantados, nada más en los últimos 4 años pasamos de ser el octavo país en consumo per cápita de cerveza en Latinoamérica con 45 Litros a ser el tercero con un consumo de 58Lt. Al año. EL crecimiento de Bavaria se ha sostenido alrededor de los 18 puntos porcentuales y el de la cerveza artesanal esta aproximadamente en un 40% año a año. Mela´s Craft Beer nace bajo la necesidad de traer al país cerveza de calidad mundial como no ex...

  7. The craft of scientific presentations critical steps to succeed and critical errors to avoid

    CERN Document Server

    Alley, Michael

    2013-01-01

    The Craft of Scientific Presentations, 2nd edition aims to strengthen you as a presenter of science and engineering. The book does so by identifying what makes excellent presenters such as Brian Cox, Jane Goodall, Richard Feynman, and Jill Bolte Taylor so strong. In addition, the book explains what causes so many scientific presentations to flounder. One of the most valuable contributions of this text is that it teaches the assertion-evidence approach to scientific presentations. Instead of building presentations, as most engineers and scientists do, on the weak foundation of topic phrases and bulleted lists, this assertion-evidence approach calls for building presentations on succinct message assertions supported by visual evidence. Unlike the commonly followed topic-subtopic approach that PowerPoint leads presenters to use, the assertion-evidence approach is solidly grounded in research. By showing the differences between strong and weak presentations, by identifying the errors that scientific presenters ty...

  8. Socio-Economic Benefits of Bamboo-Craft Entrepreneurship: The Case of Rinconada Bamboo Entrepreneurs

    Directory of Open Access Journals (Sweden)

    Seth B. Barandon

    2015-12-01

    Full Text Available –Bamboo entrepreneurship is one of the key instruments in uplifting the socio-economic status of the poor and under privileged people in Rinconada area. This study evaluated the socioeconomic benefits of bamboo craft making on the entrepreneurs of the district. Using descriptive-survey, data were obtained from 60 purposely chosen bamboo entrepreneurs from a list given by the Department of Trade of Industry. A 12-item researcher-made questionnaire was the main gathering tool supported by interview and observation. Results revealed that the social benefits derived by the bamboo entrepreneurs can able to communicate to more networks, adequate support to education of children is being provided, and television sets, while economic benefits is having their own house with sanitation. The bamboo entrepreneurs can satisfy the hierarchy of needs for shelter, security and social communication.

  9. Data-fusion for multiplatform characterization of an italian craft beer aimed at its authentication

    International Nuclear Information System (INIS)

    Biancolillo, Alessandra; Bucci, Remo; Magrì, Antonio L.; Magrì, Andrea D.; Marini, Federico

    2014-01-01

    Highlights: • Characterization of beer samples by five different fingerprinting techniques. • Chemometric discriminant and class-modeling techniques used for their authentication. • Mid-level data fusion allowed correct classification of all samples. - Abstract: Five different instrumental techniques: thermogravimetry, mid-infrared, near-infrared, ultra-violet and visible spectroscopies, have been used to characterize a high quality beer (Reale) from an Italian craft brewery (Birra del Borgo) and to differentiate it from other competing and lower quality products. Chemometric classification models were built on the separate blocks using soft independent modeling of class analogies (SIMCA) and partial least squares-discriminant analysis (PLS-DA) obtaining good predictive ability on an external test set (75% or higher depending on the technique). The use of data fusion strategies – in particular, the mid-level one – to integrate the data from the different platforms allowed the correct classification of all the training and validation samples

  10. Crafting interactivity for stakeholder engagement: transforming assumptions about communication in science and policy.

    Science.gov (United States)

    Aakhus, Mark

    2011-11-01

    The International Radiation Protection Association's guiding principles for stakeholder engagement focus on fostering, facilitating, and enabling interaction among stakeholders that is inclusive and fosters competent decision making. Implicit in these standards is a call to cultivate knowledge and competence in designing communication for stakeholder engagement among radiation protection professionals. Communication as design is an approach to risk communication in science and policy that differs from, yet complements, the more well-known communication practices of informing and persuading. Design focuses on the recurring practical problem faced by professionals in making communication possible among stakeholders where it has otherwise been difficult, impossible, or even unimagined. The knowledge and competence associated with design involves principles for crafting interactivity across a variety of mediated and non-mediated encounters among stakeholders. Risk communication can be improved by cultivating expertise in scalable communication design that embraces the demands of involvement without abandoning the need for competence in science and policy communication.

  11. From reading to writing: Evaluating the Writer's Craft as a means of assessing school student writing

    Directory of Open Access Journals (Sweden)

    Pauline Sangster, Graeme Trousdale & Charles Anderson

    2012-06-01

    Full Text Available This article reports on part of a study investigating a new writing assessment, the Writer's Craft, which requires students to read a stimulus passage and then write a continuation adopting the style of the original. The article provides a detailed analysis of stimulus passages employed within this assessment scheme and students' written continuations of these passages. The findings reveal that this is a considerably more challenging assessment writing task than has previously been recognised; and that questions arise concerning the nature of the stimulus passages and the extent to which the assessment criteria captured what the students had achieved in their writing. The implications of these findings are discussed and recommendations are made.

  12. PEDAGOGICAL SUPPORT OF GIFTED STUDENTS FROM CARPATHIAN MOUNTAIN AREAS BY MEANS OF FOLK ART CRAFTS

    Directory of Open Access Journals (Sweden)

    Iryna Kozlovska

    2015-04-01

    Full Text Available This paper, presented at the Conference Plenary the possibilities of pedagogical support of gifted students from vocational schools, living in the mountainous areas of the Carpathians. Education of talented and gifted students requires pedagogical support. The specific conditions, in which Carpathian students live, require the development of pedagogical support of their abilities. New approaches to teaching science, which led to the selection of topics of this article are described. Gifted personalities differ from their peers by same criterias. The social aspect of the problem remains in the shadow: not to be ashamed of your talent and not to compare it with cliches. And goals of educators and psychologists have to be slightly different as is common. Widespread  Carpathian crafts include: embroidery, artistic textiles producing, carpet manufacture, carving, pottery, metalworking, fabric painting, knitting, lace, artistic weaving, artistic working of  leather, stones, bones and horns. Nowadays, some detachment of mountainous regions has significantly reduced due to new means of communication, including the Internet. The possibilities of colleges in mountainous regions still cannot reach the level of the colleges in capital. In Carpathian and Prykrpattya regions there is a number of vocational schools of art direction. During the execution of creative work in class industrial training necessary for students to comply with the rules of relationships form and decoration in various ways: decorative motif obeys the functional form, enriching it artistic and creative solutions, utilitarian function obeys the decorative motif Products, the form of the product can be extremely decorative, artistic and creative product solutions focused on practical value and decorative value of the product. Pedagogical support of gifted students from art colleges in the Carpathian region has extremely wide range of opportunities. The problem of finding and nurturing

  13. Postremediation dose assessment for the former Alba Craft Laboratory site, Oxford, Ohio

    International Nuclear Information System (INIS)

    Kamboj, S.; Nimmagadda, M.; Yu, C.

    1996-04-01

    Potential maximum radiation dose rates were calculated for the former Alba Craft Laboratory site in Oxford, Ohio, which was involved in machining of uranium metal in the 1950s for the U.S. atomic energy program. The site is not currently being used. The residual radioactive material guidelines (RESRAD) computer code, which implements the methodology described in the US Department of Energy's (DOE's) manual for establishing residual radioactive material guidelines, was sued in this evaluation. Three potential land use scenarios were considered for the former Alba Craft site; the scenarios vary with regard to the type of site use, time spent at the site by the exposed individual, and sources of food consumed. Scenario A (a possible land use scenario) assumed industrial use of the site; Scenario B (a likely future land use scenario) assumed residential use of the site; and Scenario C (a possible but unlikely land use scenario) assumed the presence of a resident farmer. For scenario A, it was assumed that any water used for domestic or industrial activities would be from uncontaminated off-site municipal sources. The water used for drinking, household purposes, and irrigation was assumed to be from uncontaminated municipal sources in Scenario B; groundwater drawn from a well located at the downgradient edge of the contaminated zone would be the only source of water for drinking, irrigation, and raising livestock in Scenario C. The results of the evaluation indicated that the DOE dose limit of 100 mrem/yr would not be exceeded for any of the scenarios analyzed. The potential maximum dose rates for Scenarios A, B, and C are 0.64, 2.0, and 11 mrem/yr, respectively

  14. Simulating high frequency water quality monitoring data using a catchment runoff attenuation flux tool (CRAFT).

    Science.gov (United States)

    Adams, Russell; Quinn, Paul F; Perks, Matthew; Barber, Nicholas J; Jonczyk, Jennine; Owen, Gareth J

    2016-12-01

    High resolution water quality data has recently become widely available from numerous catchment based monitoring schemes. However, the models that can reproduce time series of concentrations or fluxes have not kept pace with the advances in monitoring data. Model performance at predicting phosphorus (P) and sediment concentrations has frequently been poor with models not fit for purpose except for predicting annual losses. Here, the data from the Eden Demonstration Test Catchments (DTC) project have been used to calibrate the Catchment Runoff Attenuation Flux Tool (CRAFT), a new, parsimonious model developed with the aim of modelling both the generation and attenuation of nutrients and sediments in small to medium sized catchments. The CRAFT has the ability to run on an hourly timestep and can calculate the mass of sediments and nutrients transported by three flow pathways representing rapid surface runoff, fast subsurface drainage and slow groundwater flow (baseflow). The attenuation feature of the model is introduced here; this enables surface runoff and contaminants transported via this pathway to be delayed in reaching the catchment outlet. It was used to investigate some hypotheses of nutrient and sediment transport in the Newby Beck Catchment (NBC) Model performance was assessed using a suite of metrics including visual best fit and the Nash-Sutcliffe efficiency. It was found that this approach for water quality models may be the best assessment method as opposed to using a single metric. Furthermore, it was found that, when the aim of the simulations was to reproduce the time series of total P (TP) or total reactive P (TRP) to get the best visual fit, that attenuation was required. The model will be used in the future to explore the impacts on water quality of different mitigation options in the catchment; these will include attenuation of surface runoff. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Development and Positioning of the Collective Product of Slovenian Craft Trademark

    Directory of Open Access Journals (Sweden)

    Adrijana Poljanšek

    2017-09-01

    Full Text Available The new collective trademark Izdelek slovenske obrti (hereinafter: PSC; English: Product of Slovenian Craft was launched on the market in 2014. The initiative for the trademark was provided by the Textile Section at the Chamber of Craft and Small Business of Slovenia (hereinafter: the OZS, which also registered the trademark. Members of the OZS have the right to obtain and use the trademark, and to use it to promote their products or services. After two years, only a small number of section members use the trademark. Because the section would like to see an increased number of members use the trademark, research regarding the latter was carried out. The results are presented in this article. The descriptive course of development and registration of the collective trademark PSC is presented in the first part of our research. In the second part, questionnaires were drafted for collective trademark PSC users, potential users and consumers. The results obtained using three questionnaires were analysed using a SWOT analysis. Based on the results, it was determined that the trademark has not yet been properly positioned on the Slovenian market. Advantages include the familiarity of Textile Section members with the trademark, and their eagerness to use it. One disadvantage is the trademark’s current lack of recognition among consumers. For this reason, section members who are also potential users of the trademark do not give it priority and therefore do not opt to use it. The following will impact the trademark’s recognition among consumers: innovative marketing campaigns, the inclusion of the media and social networks, the improved recognition and visibility of the logotype, and an effective and pervasive slogan, as was determined in our research.

  16. Using Soft Sculpture Microfossils and Other Crafted Models to Teach Geoscience

    Science.gov (United States)

    Spinak, N. R.

    2017-12-01

    For the past 5 years, the International Ocean Discovery Program (IODP) has been using the author's sewn models of microfossils to help learners understand the shapes and design of these tiny fossils. These tactile objects make the study of ancient underwater life more tangible. Multiple studies have shown that interactive models can help many learners understand science. The Montessori and Waldorf education programs are based in large part on earlier insights into meeting these needs. The act of drawing has been an essential part of medical education. The STEAM (Science, Technology, Engineering, Arts and Math) movement has advocated for STEM supporters to recognize the inseparability of science and art. This presentation describes how the author's knitted or sewn models of microfossils incorporate art and design into geoscience education. The geoscience research and art processes used in developing and creating these educational soft sculptures will be described. In multiple entry points to science study, specific reciprocal benefits to boundary crossing among the arts and sciences for those who have primary talents in a particular area of study will be discussed. Geoscience education can benefit from using art and craft items such as models. Many websites now offer soft sculptures for biology study such as organs and germs (e.g. (https://www.giantmicrobes.com/us/main/nasty-germs). The Wortheim project involving community and crochet is another approach (http://crochetcoralreef.org/). These tactile artifacts give learners an entry-level experience with biology. Three dimensional models are multisensory. The enlarged manipulative microfossil models invite learners to make comparisons and gain insights when microscopes are not available or appropriate for the audience. Adding the physical involvement of creating a microfossil yourself increases the multi-sensory experience even further. Learning craft skills extends the cross-cutting concepts of the NGSS to a mutual

  17. Safety technology: Emergency equipment and sea rescue techniques

    Energy Technology Data Exchange (ETDEWEB)

    1986-06-01

    In June 1986, a two day workshop was convened to review mobile offshore drilling unit (MODU) evacuation research and development (R D) requirements for programs currently sponsored by the Marine Engineering Committee for PERD (Panel on Energy Research and Development) task 6.2. The proceedings of the workshop are presented in terms of: evacuation technology needs; a review of current R D projects for their relevance to the technological needs; recommended changes to current projects where warranted; and recommended priority R D projects that are not presently being undertaken to meet the evacuation technology needs. Current R D projects reviewed include: preferred orientation and displacement (PROD) lifeboat launching, personal transfer baskets, arctic escape system (AES), fast rescue craft (FRC), helicopter survival suits, diving bell emergency heaters, working immersion suits, diving bell emergency ascent system, undersea robotics systems and DCIEM decompression tables. It was concluded that gaps in offshore safety/evacuation capability cannot be adequately addressed by one or two major projects. Rather, a wider range of problems exist that require attention through a greater financial commitment than is presently the case. Government-industry cooperation in this field is required. Overall, the projects were judged to have been well planned, managed, and relevant to offshore safety needs. The only exception was a feeling that diving related projects consummed a disproportionate share of the available funding. Further, there was some reservation that the robotics study was outside the 6.2 PERD R D mandate. A list of recommendations is presented. 1 tab.

  18. Development of manufacturing equipment and QC equipment for DUPIC fuel

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, J.J.; Lee, J.W.; Kim, S.S.; Yim, S.P.; Kim, J.H.; Kim, K.H.; Na, S.H.; Kim, W.K.; Shin, J.M.; Lee, D.Y.; Cho, K.H.; Lee, Y.S.; Sohn, J.S.; Kim, M.J.

    1999-05-01

    In this study, DUPIC powder and pellet fabrication equipment, welding system, QC equipment, and fission gas treatment are developed to fabricate DUPIC fuel at IMEF M6 hot cell. The systems are improved to be suitable for remote operation and maintenance with the manipulator at hot cell. Powder and pellet fabrication equipment have been recently developed. The systems are under performance test to check remote operation and maintenance. Welding chamber and jigs are designed and developed to remotely weld DUPIC fuel rod with manipulators at hot cell. Remote quality control equipment are being tested for analysis and inspection of DUPIC fuel characteristics at hot cell. And trapping characteristics is analyzed for cesium and ruthenium released under oxidation/reduction and sintering processes. The design criteria and process flow diagram of fission gas treatment system are prepared incorporating the experimental results. The fission gas treatment system has been successfully manufactured. (Author). 33 refs., 14 tabs., 91 figs

  19. TRANSPORT AND EMPLACEMENT EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) Transport and Emplacement in the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. The Transport and Emplacement equipment described in this document consists of the following: (1) WP Transporter; (2) Reusable Rail Car; (3) Emplacement Gantry; (4) Gantry Carrier; and (5) Transport Locomotive

  20. Containment and Surveillance Equipment Compendium

    International Nuclear Information System (INIS)

    Luetters, F.O.

    1980-02-01

    The Containment and Surveillance Equipment Compendium contains information sections describing the application and status of seals, optical surveillance systems, and monitors for international safeguards systems. The Compendium is a collection of information on equipment in use (generally by the IAEA) or under development in the US in diverse programs being conducted at numerous facilities under different sponsors. The Compendium establishes a baseline for the status and applications of C/S equipment and is a tool to assist in the planning of future C/S hardware development activities. The Appendix contains design concepts which can be developed to meet future goals