WorldWideScience

Sample records for survival commission bear

  1. 75 FR 65507 - U.S.-Russia Polar Bear Commission Adopts an Annual Taking Limit for the Alaska-Chukotka Polar...

    Science.gov (United States)

    2010-10-25

    ... Fish and Wildlife Service U.S.-Russia Polar Bear Commission Adopts an Annual Taking Limit for the Alaska-Chukotka Polar Bear Population AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice. SUMMARY: On June 9, 2010, by unanimous vote, the U.S.-Russia Polar Bear Commission established by the...

  2. Improved Oil-Off Survivability of Tapered Roller Bearings.

    Science.gov (United States)

    1987-10-01

    dispensed to the bearing surfaces under the influence of the centrifugal forces, the elevated temperatures at the higher speeds, ana iso ’.y :apillar, acti...79.98 28500 0.108 845.33 749.49 111.01 L225800 0.170 786.72 743.97 37.23 37000 0.165 980.47 912.90 111.01 6500 1.930 1042.52 1030.11 253.05 6500... 28500 0.108 122.6 108.7 16.1 L225800 0.170 114.1 107.9 5.4 37000 0.165 142.2 132.4 16.1 6500 1.930 151.2 149.4 36.7 6500 0.483 74.5 67.4 19.3 XC1933 3.500

  3. The utility of harvest recoveries of marked individuals to assess polar bear (Ursus maritimus) survival

    Science.gov (United States)

    Peacock, Elizabeth; Laake, Jeff; Laidre, Kristin L.; Born, Erik W.; Atkinson, Stephen N.

    2012-01-01

    Management of polar bear (Ursus maritimus) populations requires the periodic assessment of life history metrics such as survival rate. This information is frequently obtained during short-term capture and marking efforts (e.g., over the course of three years) that result in hundreds of marked bears remaining in the population after active marking is finished. Using 10 additional years of harvest recovery subsequent to a period of active marking, we provide updated estimates of annual survival for polar bears in the Baffin Bay population of Greenland and Canada. Our analysis suggests a decline in survival of polar bears since the period of active marking that ended in 1997; some of the decline in survival can likely be attributed to a decline in springtime ice concentration over the continental shelf of Baffin Island. The variance around the survival estimates is comparatively high because of the declining number of marks available; therefore, results must be interpreted with caution. The variance of the estimates of survival increased most substantially in the sixth year post-marking. When survival estimates calculated with recovery-only and recapture-recovery data sets from the period of active marking were compared, survival rates were indistinguishable. However, for the period when fewer marks were available, survival estimates were lower using the recovery-only data set, which indicates that part of the decline we detected for 2003 – 09 may be due to using only harvest recovery data. Nevertheless, the decline in the estimates of survival is consistent with population projections derived from harvest numbers and earlier vital rates, as well as with an observed decline in the extent of sea ice habitat.

  4. Survival and breeding of polar bears in the southern Beaufort Sea in relation to sea ice

    Science.gov (United States)

    Regehr, E.V.; Hunter, C.M.; Caswell, H.; Amstrup, Steven C.; Stirling, I.

    2010-01-01

    1. Observed and predicted declines in Arctic sea ice have raised concerns about marine mammals. In May 2008, the US Fish and Wildlife Service listed polar bears (Ursus maritimus) - one of the most ice-dependent marine mammals - as threatened under the US Endangered Species Act. 2. We evaluated the effects of sea ice conditions on vital rates (survival and breeding probabilities) for polar bears in the southern Beaufort Sea. Although sea ice declines in this and other regions of the polar basin have been among the greatest in the Arctic, to date population-level effects of sea ice loss on polar bears have only been identified in western Hudson Bay, near the southern limit of the species' range. 3. We estimated vital rates using multistate capture-recapture models that classified individuals by sex, age and reproductive category. We used multimodel inference to evaluate a range of statistical models, all of which were structurally based on the polar bear life cycle. We estimated parameters by model averaging, and developed a parametric bootstrap procedure to quantify parameter uncertainty. 4. In the most supported models, polar bear survival declined with an increasing number of days per year that waters over the continental shelf were ice free. In 2001-2003, the ice-free period was relatively short (mean 101 days) and adult female survival was high (0 ∙ 96-0 ∙ 99, depending on reproductive state). In 2004 and 2005, the ice-free period was longer (mean 135 days) and adult female survival was low (0 ∙ 73-0 ∙ 79, depending on reproductive state). Breeding rates and cub litter survival also declined with increasing duration of the ice-free period. Confidence intervals on vital rate estimates were wide. 5. The effects of sea ice loss on polar bears in the southern Beaufort Sea may apply to polar bear populations in other portions of the polar basin that have similar sea ice dynamics and have experienced similar, or more severe, sea ice declines. Our findings

  5. Modeling survival: application of the Andersen-Gill model to Yellowstone grizzly bears

    Science.gov (United States)

    Johnson, Christopher J.; Boyce, Mark S.; Schwartz, Charles C.; Haroldson, Mark A.

    2004-01-01

     Wildlife ecologists often use the Kaplan-Meier procedure or Cox proportional hazards model to estimate survival rates, distributions, and magnitude of risk factors. The Andersen-Gill formulation (A-G) of the Cox proportional hazards model has seen limited application to mark-resight data but has a number of advantages, including the ability to accommodate left-censored data, time-varying covariates, multiple events, and discontinuous intervals of risks. We introduce the A-G model including structure of data, interpretation of results, and assessment of assumptions. We then apply the model to 22 years of radiotelemetry data for grizzly bears (Ursus arctos) of the Greater Yellowstone Grizzly Bear Recovery Zone in Montana, Idaho, and Wyoming, USA. We used Akaike's Information Criterion (AICc) and multi-model inference to assess a number of potentially useful predictive models relative to explanatory covariates for demography, human disturbance, and habitat. Using the most parsimonious models, we generated risk ratios, hypothetical survival curves, and a map of the spatial distribution of high-risk areas across the recovery zone. Our results were in agreement with past studies of mortality factors for Yellowstone grizzly bears. Holding other covariates constant, mortality was highest for bears that were subjected to repeated management actions and inhabited areas with high road densities outside Yellowstone National Park. Hazard models developed with covariates descriptive of foraging habitats were not the most parsimonious, but they suggested that high-elevation areas offered lower risks of mortality when compared to agricultural areas.

  6. Immunotherapy using slow-cycling tumor cells prolonged overall survival of tumor-bearing mice

    Directory of Open Access Journals (Sweden)

    Sun Qing

    2012-12-01

    Full Text Available Abstract Background Despite considerable progress in the development of anticancer therapies, there is still a high mortality rate caused by cancer relapse and metastasis. Dormant or slow-cycling residual tumor cells are thought to be a source of tumor relapse and metastasis, and are therefore an obstacle to therapy. In this study, we assessed the drug resistance of tumor cells in mice, and investigated whether vaccination could promote survival. Methods The mouse colon carcinoma cell line CT-26 was treated with 5-fluorouracil to assess its sensitivity to drug treatment. Mice with colon tumors were immunized with inactivated slow-cycling CT-26 cells to estimate the efficacy of this vaccine. Results We identified a small population of slow-cycling tumor cells in the mouse colon carcinoma CT-26 cell line, which was resistant to conventional chemotherapy. To inhibit tumor recurrence and metastasis more effectively, treatments that selectively target the slow-cycling tumor cells should be developed to complement conventional therapies. We found that drug-treated, slow-cycling tumor cells induced a more intense immune response in vitro. Moreover, vaccination with inactivated slow-cycling tumor cells caused a reduction in tumor volume and prolonged the overall survival of tumor-bearing mice. Conclusions These findings suggest that targeting of slow-cycling tumor cells application using immunotherapy is a possible treatment to complement traditional antitumor therapy.

  7. Effects of earlier sea ice breakup on survival and population size of polar bears in western Hudson Bay

    Science.gov (United States)

    Regehr, E.V.; Lunn, N.J.; Amstrup, Steven C.; Stirling, I.

    2007-01-01

    Some of the most pronounced ecological responses to climatic warming are expected to occur in polar marine regions, where temperature increases have been the greatest and sea ice provides a sensitive mechanism by which climatic conditions affect sympagic (i.e., with ice) species. Population-level effects of climatic change, however, remain difficult to quantify. We used a flexible extension of Cormack-Jolly-Seber capture-recapture models to estimate population size and survival for polar bears (Ursus maritimus), one of the most ice-dependent of Arctic marine mammals. We analyzed data for polar bears captured from 1984 to 2004 along the western coast of Hudson Bay and in the community of Churchill, Manitoba, Canada. The Western Hudson Bay polar bear population declined from 1,194 (95% CI = 1,020-1,368) in 1987 to 935 (95% CI = 794-1,076) in 2004. Total apparent survival of prime-adult polar bears (5-19 yr) was stable for females (0.93; 95% CI = 0.91-0.94) and males (0.90; 95% CI = 0.88-0.91). Survival of juvenile, subadult, and senescent-adult polar bears was correlated with spring sea ice breakup date, which was variable among years and occurred approximately 3 weeks earlier in 2004 than in 1984. We propose that this correlation provides evidence for a causal association between earlier sea ice breakup (due to climatic warming) and decreased polar bear survival. It may also explain why Churchill, like other communities along the western coast of Hudson Bay, has experienced an increase in human-polar bear interactions in recent years. Earlier sea ice breakup may have resulted in a larger number of nutritionally stressed polar bears, which are encroaching on human habitations in search of supplemental food. Because western Hudson Bay is near the southern limit of the species' range, our findings may foreshadow the demographic responses and management challenges that more northerly polar bear populations will experience if climatic warming in the Arctic continues as

  8. What Is the Long-term Survival for Primary THA With Small-head Metal-on-metal Bearings?

    Science.gov (United States)

    de Steiger, Richard; Peng, Andrea; Lewis, Peter; Graves, Stephen

    2018-02-08

    Large-head metal-on-metal (MoM) bearing hip replacements have been shown to have a much higher rate of revision than other bearing surfaces. However, small-head (≤ 32 mm) MoM bearing surfaces have been in use for many years with several reports of satisfactory mid- to long-term survivorship. It is unclear whether the long-term survival of small-head MoM devices will continue to be satisfactory or whether the same concerns seen with the large-head MoM devices will ultimately become more prevalent. We analyzed a large national registry to ask: (1) What is the 15-year Kaplan-Meier survivorship of primary conventional THA using small-head (≤ 32 mm) MoM bearing surfaces compared with large-head MoM bearing surfaces in primary THA? (2) Is there an increased rate of revision for adverse reaction to metal debris (ARMD) in this group of patients over time? The Australian Orthopaedic Association National Joint Replacement Registry longitudinally maintains data on all primary and revision joint arthroplasties with nearly 100% capture. We analyzed all conventional primary THAs performed from Registry inception in September 1999 until December 31, 2015, in patients with a diagnosis of osteoarthritis and using MoM bearing surfaces ≤ 32 mm in diameter, defined as small-head MoM. The study group included 4838 primary THA with ≤ 32-mm MoM bearing surfaces. There were 2506 (51.8%) male patients and the median age of patients undergoing THA with a small-head MoM bearing surface was 64 years (range, 20-92 years of age). The outcome measure was the cumulative percent revision defined as the time to first revision using Kaplan-Meier estimates of survivorship at 15 years; reasons for revision and type of revision were also examined. We specifically investigated whether there was an increased risk of revision for ARMD in this MoM group compared with all other bearing surfaces. We compared these results with large-head MoM THAs (femoral head size > 32 mm). The cumulative percent

  9. Ambiguous effect of signals transmitted by the vagus nerve on fibrosarcoma incidence and survival of tumor-bearing rats.

    Science.gov (United States)

    Mikova, Lucia; Horvathova, Lubica; Ondicova, Katarina; Tillinger, Andrej; Vannucci, Luca E; Bizik, Jozef; Gidron, Yori; Mravec, Boris

    2015-04-23

    While the parasympathetic nervous system appears to be involved in the regulation of tumor progression, its exact role is still unclear. Therefore, using a rat BP6-TU2 fibrosarcoma tumor model, we investigated the effect of (1) reduction of vagal activity produced by subdiaphragmatic vagotomy; and (2) enhancement of vagal activity produced by continuous delivery of electric impulses to the cervical part of the vagus nerve on tumor development and survival of tumor-bearing rats. We also evaluated the expression of cholinergic receptors within in vitro cultivated BP6-TU2 cells. Interestingly, we found that both, vagal stimulation and subdiaphragmatic vagotomy slightly reduced tumor incidence. However, survival of tumor-bearing rats was not affected by any of the experimental approaches. Additionally, we detected mRNA expression of the α1, α2, α5, α7, and α10 subunits of nicotinic receptors and the M1, M3, M4, and M5 subtypes of muscarinic receptors within in vitro cultivated BP6-TU2 cells. Our data indicate that the role of the vagus nerve in modulation of fibrosarcoma development is ambiguous and uncertain and requires further investigation. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  10. Reproductive parameters and cub survival of brown bears in the Rusha area of the Shiretoko Peninsula, Hokkaido, Japan.

    Science.gov (United States)

    Shimozuru, Michito; Yamanaka, Masami; Nakanishi, Masanao; Moriwaki, Jun; Mori, Fumihiko; Tsujino, Masakatsu; Shirane, Yuri; Ishinazaka, Tsuyoshi; Kasai, Shinsuke; Nose, Takane; Masuda, Yasushi; Tsubota, Toshio

    2017-01-01

    Knowing the reproductive characteristics of a species is essential for the appropriate conservation and management of wildlife. In this study, we investigated the demographic parameters, including age of primiparity, litter size, inter-birth interval, reproductive rate, and cub survival rate, of Hokkaido brown bears (Ursus arctos yesoensis) in the Rusha area on the Shiretoko Peninsula, Hokkaido, Japan, based on a long-term, individual-based monitoring survey. A total of 15 philopatric females were observed nearly every year from 2006 to 2016, and these observations were used to estimate reproductive parameters. The mean age of primiparity was 5.3 ± 0.2 (SE) years (n = 7, 95% CI = 5.0-5.6). We observed 81 cubs in 46 litters from 15 bears. Litter size ranged from one to three cubs, and averaged 1.76 ± 0.08 (SE) cubs/litter (95% CI = 1.61-1.91). Inter-birth intervals ranged from 1 to 4 years, and the mean value was estimated as 2.43 (95% CI = 2.16-2.76) and 2.53 (95% CI = 2.26-2.85) years in all litters and in litters that survived at least their first year, respectively. The reproductive rate was estimated from 0.70 to 0.76 young born/year/reproductive adult female, depending on the method of calculation. The cub survival rate between 0.5 and 1.5 years ranged from 60 to 73%. Most cub disappearances occurred in July and August, suggesting that cub mortality is mainly due to poor nutrition in the summer. All reproductive parameters observed in the Rusha area on the Shiretoko Peninsula fell within the range reported in Europe and North America, and were among the lowest or shortest age of primiparity, litter size, and inter-birth intervals, and ranked at a high level for reproductive rate.

  11. Outcomes of different bearings in total hip arthroplasty - implant survival, revision causes, and patient-reported outcome.

    Science.gov (United States)

    Varnum, Claus

    2017-03-01

    Total hip arthroplasty (THA) is a common and successful treatment of patients suffering from severe osteoarthritis that significantly reduces pain and improves hip function and quality of life. Traditionally, the outcome of THA has been evaluated by orthopaedic surgeons and assessed in morbidity and mortality rates, and implant survival. As patients and surgeons may assess outcome after THA differently, patient-reported outcomes (PROMs) have gained much more interest and are today recognized as very important tools for evaluating the outcome and satisfaction after THA. One of the prognostic factors for the outcome of THA is the type of bearings. This PhD thesis focuses on the influence of different types of bearings on implant survival, revision causes, PROMs, and noises from THA. The aims of the thesis were: Study I: To examine the revision risk and to investigate the causes of revision of cementless ceramic-on-ceramic (CoC) THAs comparing them to those of "standard" metal-on-polyethylene (MoP) THAs. Study II: To compare the six-year revision risk for metal-on-metal (MoM) with that for MoP bearings in cementless stemmed THA, and further to study the revision risk for different designs of stemmed MoM THAs and the causes of revision. Study III: To examine the association between CoC, MoM, and MoP bearings and both generic and disease-specific PROMs, and furthermore to examine the incidence and types of noises from the three types of bearings and identify the effect of noises on PROM scores. In study I and III, we used data from the Danish Hip Arthroplasty Registry combined with data from the Civil Registration System and the Danish National Patient Registry. In study II, data from the Nordic Arthroplasty Register Association, containing data from hip arthroplasty registries in Denmark, Norway, Sweden, and Finland, was used. In study I, 11,096 patients operated from 2002 through 2009 with cementless THA were included. Of these, 16% had CoC THA and 84% had MoP THA. At

  12. Enhancement of survival of 9L gliosarcoma bearing rats following intracerebral delivery of drugs in combination with microbeam radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Regnard, Pierrick [Biomedical Facility, 6, Rue Jules Horowitz, ESRF, BP220, F 38043 Grenoble (France); Braeuer-Krisch, Elke [Biomedical Beamline, ESRF, BP220, F 38043 Grenoble (France); Tropres, Irene [IFR1, Universite Joseph Fourier, 3T MRI unit, CHU A Michallon, BP217, F 38043 Grenoble (France); Keyrilaeinen, Jani; Bravin, Alberto [Biomedical Beamline, ESRF, BP220, F 38043 Grenoble (France); Le Duc, Geraldine [Biomedical Facility, 6, Rue Jules Horowitz, ESRF, BP220, F 38043 Grenoble (France)], E-mail: leduc@esrf.fr

    2008-12-15

    Microbeam radiation therapy (MRT) is a form of radiosurgery first dedicated to the treatment of brain tumors. It uses arrays of synchrotron generated X-rays microbeams of very high doses (typically 625 Gy). Microbeams are typically few micrometers large (25 {mu}m) and few hundred micrometers spaced (200 {mu}m). Previous experiments have shown that despite a good tumor eradication rate (5/11), a 100-{mu}m spacing unidirectional irradiation (skin dose 625 Gy, width 25 {mu}m) was too invasive for normal tissue. On the contrary, a 200-{mu}m spacing unidirectional irradiation preserved healthy tissue with a low tumor eradication rate (2/32). The purpose of this study was to enhance the potential of the 200 {mu}m spacing irradiation protocol. After diagnosis of the tumor by MRI, 9L tumor-bearing rats were laterally irradiated with 51 microbeams (625 Gy, 25 {mu}m, 200 {mu}m) 14 days after implantation. Three drugs (Gd-DTPA, CisPt, temozolomide) were tested, after intratumoral injection at the theoretical center of the tumor. Control rats displayed a median survival time of 19 days. There was no significant difference between drug-treated rats and control group. Irradiated animals showed an increase in life span (ILS) of 60.5%. Interestingly, the ILS increased to 131.6% and 1/6 rat survived more than 1 year in case of MRT combined with gadolinium injection. These results showed that the synergy between gadolinium injection (acting as a dose enhancer) and MRT improved significantly the life span of tumor bearing rats (more than a factor 2)

  13. Efficacy of Re-188-labelled sulphur colloid on prolongation of survival time in melanoma-bearing animals

    Energy Technology Data Exchange (ETDEWEB)

    Chen, F.D.; Hsieh, B.T. E-mail: bthsieh@iner.gov.tw; Wang, H.E.; Ou, Y.H.; Yang, W.K.; Whang-Peng, J.; Liu, R.S.; Knapp, F.F.; Ting, G.; Yen, S.H

    2001-10-01

    In this study, the effectiveness of a {sup 188}Re labeled sulfur colloid with two particle size ranges was used to evaluate the effectiveness of this agent on melanoma tumors in mice in terms of animal lifespan. Methods: Two separate group of animals were used for investigating biodistribution and survival time. A total of 188 B16F10-melanoma-bearing BDF{sub 1} mice were injected intraperitoneally with 3.7 MBq (0.1mCi)/2mL of radiolabeled sulfur colloid ten days after intraperitoneal inoculation of 5x10{sup 5} B16F10 melanoma cells/2ml. For group 1, 30 mice were sacrificed at 1, 4, 24, 48 and 72 hours for biodistribution studies. In group 2, 158 mice were divided into 9 groups (n=16{approx}18/groups)each receiving respectively tumor alone, tumor with normal saline, cold colloid or hot colloid with 16, 23, 31, 46, 62, or 124 MBq activity. Each of these colloid groups was further divided into two groups, one receiving smaller particle sizes (<3{mu}m:80.4 {+-}7.2%, colloid 1) and the other receiving larger particle sizes (<3{mu}m:12.3{+-}1.0%, colloid 2). The animals were checked daily until death and their survival recorded. Results: Colloid 2 showed higher accumulation in almost all tissues, the highest accumulation organ was tumor ({approx} 40%), then spleen ({approx}20%), stomach ({approx}15%), diaphragm ({approx}3%), and liver ({approx}2%). There was a significant increase in survival time with increasing amount of the larger-particle-size colloid. Administered levels of 16-31 MBq/mouse were most efficacious and with higher amounts the survival times decreased significantly below that of the controls. There was a significant difference in the dose-response curves for the two preparations. Protection factors (1/Relative-risk) of nearly 5 were achieved using the larger colloid size, and nearly 30 using the smaller colloid size. An amount of 16-31 MBq of the colloid 2 was the optimal activity in these studies. On the one hand, the survival data agreed well with the

  14. Chelerythrine delayed tumor growth and increased survival duration of Dalton′s lymphoma bearing BALB/c H 2d mice by activation of NK cells in vivo

    Directory of Open Access Journals (Sweden)

    Sanjay Kumar

    2015-01-01

    Full Text Available Aim: The aims of the present investigation were to evaluate the antitumor effect of chelerythrine (CHE on in vivo growth and survival duration of BALB/c (H 2d mice bearing Dalton′s lymphoma (DL and enhanced function of tumor associated NK cells (TANK cells. Materials and Methods: BALB/c (H 2d mice at 8-10 weeks of age of either sex were used. Increasing concentration of CHE (1.25, 2.5, and 5.0 mg/kg, staurosporine (0.625, 1.0, 1.5, and 2.0 mg/kg and cyclophosphamide (25, 50, 100, and 200 mg/kg were administered intraperitoneally and tumor regression and survival duration of tumor bearing host were determined, and thereafter expression of NKG2D and NKG2A on TANK cells were detected. Results: Our results show that treatment with 2.5 mg/kg of CHE results in a significant reduction in mean tumor volume and increased survival duration of DL bearing BALB/c (H 2d mice when compared to control. Activating receptor NKG2D on TANK cells were observed upregulated in contrast to inhibitory receptor NKG2A. Conclusions: CHE reduced mean tumor volume and increased survival duration of DL bearing BALB/c (H 2d mice. Increased expression of activating receptor NKG2D on TANK cells results in recovery of immunosuppression during tumor progression. Therefore, CHE could be a potential anticancer therapeutic agent that may be used to replace chemo-radio-therapy in future.

  15. Survival

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — These data provide information on the survival of California red-legged frogs in a unique ecosystem to better conserve this threatened species while restoring...

  16. Towards Identification of Rotordynamic Properties for Seals in Multiphase Flow Using Active Magnetic Bearings. Design and Commissioning of a Novel Test Facility

    DEFF Research Database (Denmark)

    Voigt, Andreas Jauernik

    The energy sector’s recent drive towards subsea oil and gas production brings about a requirement to locate process equipment in deep-water installations for which performing liquid and gas separation on the well stream is limited. Consequently, the subsea installed pumps and compressors are now...... required to handle multiphase fluids. The difference between fundamental properties of single phase and multiphase flows entails that multiphase flow impact on the rotordynamics of rotating machines requires special treatment. Furthermore, turbomachinery seals are pivotal for the performance of pumps...... scale rotordynamic test bench consisting of two radial active magnetic bearings with an embedded Hall sensor system, a rigid rotor, and a drive unit acts as the hub. In addition, the test facility includes a module facilitating calibration of the state of the art system of Hall sensors which provides...

  17. Effect of freeze temperature on ice formation and long-term survival of the woolly bear caterpillar (Pyrrharctia isabella).

    Science.gov (United States)

    Layne, Jack R.; Blakeley, Deborah L.

    2002-12-01

    Tissue ice content and post-freeze survival were documented for caterpillars of the arctiid moth Pyrrharctia isabella. Tissue ice content was inversely dependent on freeze temperature (-3 degrees C=24.4%, -6 degrees C=40.2%, -10 degrees C=48.7%) but values were substantially less than expected given hemolymph osmolality. Accumulation of glycerol (200-300 mM) in the hemolymph helped to colligatively reduce the amount of freezable water. Caterpillars engaged in locomotion within minutes after thawing but mortality occurred over the ensuing weeks, with the highest level (52.2%) occurring in the -10 degrees C fast thaw group. Pupation rates ranged between 45.7 to 52.4% of caterpillars in a test group. Adult emergence exceeded 60% of the pupae in the -3 and -6 degrees C test groups. Hence, P. isabella caterpillars survived ecologically relevant freezes and continued their life cycles to adulthood.

  18. Joint Commission

    Science.gov (United States)

    ... Commission Websites Quick Links The Center for Transforming Healthcare Blogs DataMart Event ... Table of Contents and Abstracts for The Joint Commission Journal on Quality and Patient Safety Monday October 2, ...

  19. Effects of Oral Administration of Fucoidan Extracted from Cladosiphon okamuranus on Tumor Growth and Survival Time in a Tumor-Bearing Mouse Model

    Directory of Open Access Journals (Sweden)

    Yoshiharu Okamoto

    2012-10-01

    Full Text Available We evaluated the anti-tumor activities of the oral administration of fucoidan extracted from Cladosiphon okamuranus using a tumor (colon 26-bearing mouse model. The materials used included low-molecular-weight fucoidan (LMWF: 6.5–40 kDa, intermediate-molecular-weight fucoidan (IMWF: 110–138 kDa and high-molecular-weight fucoidan (HMWF: 300–330 kDa. The IMWF group showed significantly suppressed tumor growth. The LMWF and HMWF groups showed significantly increased survival times compared with that observed in the control group (mice fed a fucoidan-free diet. The median survival times in the control, LMWF, IMWF and HMWF groups were 23, 46, 40 and 43 days, respectively. It was also found that oral administration of fucoidan increased the population of natural killer cells in the spleen. Furthermore, from the results of the experiment using Myd-88 knockout mice, it was found that these effects are related to gut immunity. These results suggest that fucoidan is a candidate anti-tumor functional food.

  20. Outcomes of different bearings in total hip arthroplasty - implant survival, revision causes, and patient-reported outcome

    DEFF Research Database (Denmark)

    Varnum, Claus

    2017-01-01

    Total hip arthroplasty (THA) is a common and successful treatment of patients suffering from severe osteoarthritis that significantly reduces pain and improves hip function and quality of life. Traditionally, the outcome of THA has been evaluated by orthopaedic surgeons and assessed in morbidity...... and mortality rates, and implant survival. As patients and surgeons may assess outcome after THA differently, patient-reported outcomes (PROMs) have gained much more interest and are today recognized as very important tools for evaluating the outcome and satisfaction after THA. One of the prognostic factors......, Sweden, and Finland, was used. In study I, 11,096 patients operated from 2002 through 2009 with cementless THA were included. Of these, 16% had CoC THA and 84% had MoP THA. At 8.7-year follow-up, no difference in RR of revision for any cause was found for CoC compared to MoP THA. One cause of revision...

  1. Depression of p53-independent Akt survival signals in human oral cancer cells bearing mutated p53 gene after exposure to high-LET radiation

    Energy Technology Data Exchange (ETDEWEB)

    Nakagawa, Yosuke [Department of Oral and Maxillofacial Surgery, School of Medicine, Nara Medical University, 840 Shijo-cho, Kashihara, Nara 634-8521 (Japan); Takahashi, Akihisa [Advanced Scientific Research Leader Development Unit, Gunma University, 3-39-22 Showa-machi, Maebashi, Gunma 371-8511 (Japan); Kajihara, Atsuhisa; Yamakawa, Nobuhiro; Imai, Yuichiro [Department of Oral and Maxillofacial Surgery, School of Medicine, Nara Medical University, 840 Shijo-cho, Kashihara, Nara 634-8521 (Japan); Ota, Ichiro; Okamoto, Noritomo [Department of Otorhinolaryngology, School of Medicine, Nara Medical University, 840 Shijo-cho, Kashihara, Nara 634-8521 (Japan); Mori, Eiichiro [Department of Radiation Oncology, School of Medicine, Nara Medical University, 840 Shijo-cho, Kashihara, Nara 634-8521 (Japan); Noda, Taichi [Department of Dermatology, School of Medicine, Nara Medical University, 840 Shijo-cho, Kashihara, Nara 634-8521 (Japan); Furusawa, Yoshiya [Heavy-ion Radiobiology Research Group, Research Center for Charged Particle Therapy, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Kirita, Tadaaki [Department of Oral and Maxillofacial Surgery, School of Medicine, Nara Medical University, 840 Shijo-cho, Kashihara, Nara 634-8521 (Japan); Ohnishi, Takeo, E-mail: tohnishi@naramed-u.ac.jp [Department of Radiation Oncology, School of Medicine, Nara Medical University, 840 Shijo-cho, Kashihara, Nara 634-8521 (Japan)

    2012-07-13

    Highlights: Black-Right-Pointing-Pointer High-LET radiation induces efficiently apoptosis regardless of p53 gene status. Black-Right-Pointing-Pointer We examined whether high-LET radiation depresses the Akt-survival signals. Black-Right-Pointing-Pointer High-LET radiation depresses of survival signals even in the mp53 cancer cells. Black-Right-Pointing-Pointer High-LET radiation activates Caspase-9 through depression of survival signals. Black-Right-Pointing-Pointer High-LET radiation suppresses cell growth through depression of survival signals. -- Abstract: Although mutations and deletions in the p53 tumor suppressor gene lead to resistance to low linear energy transfer (LET) radiation, high-LET radiation efficiently induces cell lethality and apoptosis regardless of the p53 gene status in cancer cells. Recently, it has been suggested that the induction of p53-independent apoptosis takes place through the activation of Caspase-9 which results in the cleavage of Caspase-3 and poly (ADP-ribose) polymerase (PARP). This study was designed to examine if high-LET radiation depresses serine/threonine protein kinase B (PKB, also known as Akt) and Akt-related proteins. Human gingival cancer cells (Ca9-22 cells) harboring a mutated p53 (mp53) gene were irradiated with 2 Gy of X-rays or Fe-ion beams. The cellular contents of Akt-related proteins participating in cell survival signaling were analyzed with Western Blotting 1, 2, 3 and 6 h after irradiation. Cell cycle distributions after irradiation were assayed with flow cytometric analysis. Akt-related protein levels decreased when cells were irradiated with high-LET radiation. High-LET radiation increased G{sub 2}/M phase arrests and suppressed the progression of the cell cycle much more efficiently when compared to low-LET radiation. These results suggest that high-LET radiation enhances apoptosis through the activation of Caspase-3 and Caspase-9, and suppresses cell growth by suppressing Akt-related signaling, even in mp

  2. Pioglitazone treatment increases survival and prevents body weight loss in tumor-bearing animals: possible anti-cachectic effect.

    Science.gov (United States)

    Beluzi, Mércia; Peres, Sidney B; Henriques, Felipe S; Sertié, Rogério A L; Franco, Felipe O; Santos, Kaltinaitis B; Knobl, Pâmela; Andreotti, Sandra; Shida, Cláudio S; Neves, Rodrigo X; Farmer, Stephen R; Seelaender, Marília; Lima, Fábio B; Batista, Miguel L

    2015-01-01

    Cachexia is a multifactorial syndrome characterized by profound involuntary weight loss, fat depletion, skeletal muscle wasting, and asthenia; all symptoms are not entirely attributable to inadequate nutritional intake. Adipose tissue and skeletal muscle loss during cancer cachexia development has been described systematically. The former was proposed to precede and be more rapid than the latter, which presents a means for the early detection of cachexia in cancer patients. Recently, pioglitazone (PGZ) was proposed to exhibit anti-cancer properties, including a reduction in insulin resistance and adipose tissue loss; nevertheless, few studies have evaluated its effect on survival. For greater insight into a potential anti-cachectic effect due to PGZ, 8-week-old male Wistar rats were subcutaneously inoculated with 1 mL (2×107) of Walker 256 tumor cells. The animals were randomly assigned to two experimental groups: TC (tumor + saline-control) and TP5 (tumor + PGZ/5 mg). Body weight, food ingestion and tumor growth were measured at baseline and after removal of tumor on days 7, 14 and 26. Samples from different visceral adipose tissue (AT) depots were collected on days 7 and 14 and stored at -80o C (5 to 7 animals per day/group). The PGZ treatment showed an increase in the survival average of 27.3% (P< 0.01) when compared to TC. It was also associated with enhanced body mass preservation (40.7 and 56.3%, p< 0.01) on day 14 and 26 compared with the TC group. The treatment also reduced the final tumor mass (53.4%, p<0.05) and anorexia compared with the TC group during late-stage cachexia. The retroperitoneal AT (RPAT) mass was preserved on day 7 compared with the TC group during the same experimental period. Such effect also demonstrates inverse relationship with tumor growth, on day 14. Gene expression of PPAR-γ, adiponectin, LPL and C/EBP-α from cachectic rats was upregulated after PGZ. Glucose uptake from adipocyte cells (RPAT) was entirely re-established due to

  3. Pioglitazone treatment increases survival and prevents body weight loss in tumor-bearing animals: possible anti-cachectic effect.

    Directory of Open Access Journals (Sweden)

    Mércia Beluzi

    Full Text Available Cachexia is a multifactorial syndrome characterized by profound involuntary weight loss, fat depletion, skeletal muscle wasting, and asthenia; all symptoms are not entirely attributable to inadequate nutritional intake. Adipose tissue and skeletal muscle loss during cancer cachexia development has been described systematically. The former was proposed to precede and be more rapid than the latter, which presents a means for the early detection of cachexia in cancer patients. Recently, pioglitazone (PGZ was proposed to exhibit anti-cancer properties, including a reduction in insulin resistance and adipose tissue loss; nevertheless, few studies have evaluated its effect on survival. For greater insight into a potential anti-cachectic effect due to PGZ, 8-week-old male Wistar rats were subcutaneously inoculated with 1 mL (2×107 of Walker 256 tumor cells. The animals were randomly assigned to two experimental groups: TC (tumor + saline-control and TP5 (tumor + PGZ/5 mg. Body weight, food ingestion and tumor growth were measured at baseline and after removal of tumor on days 7, 14 and 26. Samples from different visceral adipose tissue (AT depots were collected on days 7 and 14 and stored at -80o C (5 to 7 animals per day/group. The PGZ treatment showed an increase in the survival average of 27.3% (P< 0.01 when compared to TC. It was also associated with enhanced body mass preservation (40.7 and 56.3%, p< 0.01 on day 14 and 26 compared with the TC group. The treatment also reduced the final tumor mass (53.4%, p<0.05 and anorexia compared with the TC group during late-stage cachexia. The retroperitoneal AT (RPAT mass was preserved on day 7 compared with the TC group during the same experimental period. Such effect also demonstrates inverse relationship with tumor growth, on day 14. Gene expression of PPAR-γ, adiponectin, LPL and C/EBP-α from cachectic rats was upregulated after PGZ. Glucose uptake from adipocyte cells (RPAT was entirely re

  4. 77 FR 70423 - Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC...

    Science.gov (United States)

    2012-11-26

    ... Energy Regulatory Commission Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC; Notice of Application for Partial Transfer of Licenses, and Soliciting Comments and Motions To Intervene On October 25, 2012, Black Bear Hydro Partners, LLC, sole licensee (transferor) and...

  5. Effect of oral administration of lactobacillus acidophilus on the immune responses and survival of BALB/c mice bearing human breast cancer

    Directory of Open Access Journals (Sweden)

    Soltan Dallal MM

    2010-02-01

    Full Text Available "n Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Background: In according to immunomodulatory effect of probiotics and effect of these bacteria on the effectiveness of immune responses, at the present work we proposed the evaluation of oral administration of L.acidophilus on the immune statues in BALB/c mice bearing breast cancer."n"nMethods: A total of 30 In-bred BALB/c mices aged from six to eight weeks weighting 25-30g were randomly enrolled in our study, in two groups each consist of 15 mices. The L.acidophilus ATCC4356 strain used in this study was inoculated in MRS broth and cultivated for a day at 37°C under anaerobic conditions, collected by centrifugation and resuspend in Phosphate Buffer Saline (PBS. After preparation of proper amount of these suspensions it was orally administered to the mice with a gastric feeding, Control mices received an equal volume of PBS in duration of study."n"nResults: Results showed the increase in production of IFnγ (p<0.005, and decrease in production of Th2 cytokines such as IL4 (p=0.347 in the L.acidophilus administered mice in comparison to control group of mice. In addition the proliferation of immune cells in probiotic group was significantly higher than controls, and most importantly probiotic administered mice showed

  6. Journal bearing

    Science.gov (United States)

    Menke, John R.; Boeker, Gilbert F.

    1976-05-11

    1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

  7. Stage at diagnosis and ovarian cancer survival

    DEFF Research Database (Denmark)

    Maringe, Camille; Walters, Sarah; Butler, John

    2012-01-01

    We investigate what role stage at diagnosis bears in international differences in ovarian cancer survival.......We investigate what role stage at diagnosis bears in international differences in ovarian cancer survival....

  8. Grizzly bear

    Science.gov (United States)

    Schwartz, C.C.; Miller, S.D.; Haroldson, M.A.; Feldhamer, G.; Thompson, B.; Chapman, J.

    2003-01-01

    The grizzly bear inspires fear, awe, and respect in humans to a degree unmatched by any other North American wild mammal. Like other bear species, it can inflict serious injury and death on humans and sometimes does. Unlike the polar bear (Ursus maritimus) of the sparsely inhabited northern arctic, however, grizzly bears still live in areas visited by crowds of people, where presence of the grizzly remains physically real and emotionally dominant. A hike in the wilderness that includes grizzly bears is different from a stroll in a forest from which grizzly bears have been purged; nighttime conversations around the campfire and dreams in the tent reflect the presence of the great bear. Contributing to the aura of the grizzly bear is the mixture of myth and reality about its ferocity. unpredictable disposition, large size, strength, huge canines, long claws, keen senses, swiftness, and playfulness. They share characteristics with humans such as generalist life history strategies. extended periods of maternal care, and omnivorous diets. These factors capture the human imagination in ways distinct from other North American mammals. Precontact Native American legends reflected the same fascination with the grizzly bear as modern stories and legends (Rockwell 1991).

  9. Effects of Some Natural Immunomodulatory Compounds in Combination with Thalidomide on Survival Rate and Tumor Size in Fibrosarcoma-Bearing Mice

    Directory of Open Access Journals (Sweden)

    Reza Aghebati Maleki

    2014-10-01

    Full Text Available Purpose: Despite significant advances have been achieved in cancer therapy, response to conventional treatments like surgery, radiotherapy and chemotherapy varies among individuals. Immunotherapy is known to be an effective strategy for patients who are resistant to the currently available interventions. Methods: Ninety-six male Balb/c mice (aged 6-8 weeks were selected and divided into twelve groups of eight. Approximately, 1×106of WEHI-164 cells were injected to each mouse for tumor genesis. Five immunotherapy treatments were considered in this study, including Heat Shock Proteins (HSP, Bacillus Calmette-Guérin (BCG, Bifidobacterium, Immuno-Modulator Drug (IMOD and Thalidomide. After tumor formation, the groups were treated with one or more of these therapies. Tumor size and survival rate was regularly monitored. Results: Depending on the treatment group, tumor sizes were different. In some groups, combined treatments demonstrated more inhibitory effects on tumor growth rate. The mice in group (IMOD+ Thalidomide had the lowest survival rate but group (BCG+ HSP+ Thalidomide survived until the end of the experiment. Conclusion: The (HSP+ BCG+ Thalidomide group exhibited satisfactory outcomes and two third of the mice in this group went into complete remission. Some combination therapies in test groups had significant impacts on survival and tumor growth rate.

  10. Seismic bearing

    Science.gov (United States)

    Power, Dennis

    2009-05-01

    Textron Systems (Textron) has been using geophones for target detection for many years. This sensing capability was utilized for detection and classification purposes only. Recently Textron has been evaluating multiaxis geophones to calculate bearings and track targets more specifically personnel. This capability will not only aid the system in locating personnel in bearing space or cartesian space but also enhance detection and reduce false alarms. Textron has been involved in the testing and evaluation of several sensors at multiple sites. One of the challenges of calculating seismic bearing is an adequate signal to noise ratio. The sensor signal to noise ratio is a function of sensor coupling to the ground, seismic propagation and range to target. The goals of testing at multiple sites are to gain a good understanding of the maximum and minimum ranges for bearing and detection and to exploit that information to tailor sensor system emplacement to achieve desired performance. Test sites include 10A Site Devens, MA, McKenna Airfield Ft. Benning, GA and Yuma Proving Ground Yuma, AZ. Geophone sensors evaluated include a 28 Hz triax spike, a 15 Hz triax spike and a hybrid triax spike consisting of a 10 Hz vertical geophone and two 28 Hz horizontal geophones. The algorithm uses raw seismic data to calculate the bearings. All evaluated sensors have triaxial geophone configuration mounted to a spike housing/fixture. The suite of sensors also compares various types of geophones to evaluate benefits in lower bandwidth. The data products of these tests include raw geophone signals, seismic features, seismic bearings, seismic detection and GPS position truth data. The analyses produce Probability of Detection vs range, bearing accuracy vs range, and seismic feature level vs range. These analysis products are compared across test sites and sensor types.

  11. 77 FR 77070 - Black Bear Hydro Partners, LLC;

    Science.gov (United States)

    2012-12-31

    ... Energy Regulatory Commission Black Bear Hydro Partners, LLC; Notice of Intent To File License Application...-filing Process. b. Project No.: 2727-086. c. Dated Filed: October 24, 2012. d. Submitted By: Black Bear Hydro Partners, LLC (Black Bear Hydro). e. Name of Project: Ellsworth Hydroelectric Project. f. Location...

  12. Hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the rheological models and the equations of lubrication. It also presents the numerical approaches used to solve the above equations by finite differences, finite volumes and finite elements methods.

  13. Economic Commission Report

    Science.gov (United States)

    American Indian Journal, 1977

    1977-01-01

    Summarizing presentations and discussions of the Economic Commission of the International Non-Governmental Organizations Conference on Discrimination Against Indigenous Populations (1977), this report addresses: multinational corporations; the land question; and the Commission's recommended "Plan of Action". (JC)

  14. Can polar bear hairs absorb environmental energy?

    Directory of Open Access Journals (Sweden)

    He Ji-Huan

    2011-01-01

    Full Text Available A polar bear (Ursus maritimus has superior ability to survive in harsh Arctic regions, why does the animal have such an excellent thermal protection? The present paper finds that the unique labyrinth cavity structure of the polar bear hair plays an important role. The hair can not only prevent body temperature loss but can also absorb energy from the environment.

  15. National Planning Commission Arrangements

    OpenAIRE

    Watkins, Joanna

    2009-01-01

    Based on a review of relevant World Bank materials and outside sources, this note focuses on two questions of critical importance in discussions surrounding the establishment of a planning commission. These are: 1) what planning commission arrangements seem to be effective? 2) What should the role of a planning commission be in a quasi-federal system? It should be recognized that a plannin...

  16. Eastern slopes grizzly bear project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-01-01

    The cumulative effects of human activities on the grizzly bears in the central Canadian Rockies are not well known. As a result, a project was initiated in 1994 to address the urgent requirement for accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of this study will be used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers are monitoring 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers involved in the project are working with representatives from Husky Oil and Talisman Energy on the sound development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over seven years indicated that the grizzly bears have few and infrequent offspring. Using the information gathered so far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears recover very slowly from high mortality, and also considering that the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The status of the population and habitat of the grizzly bear will be assessed upon the conclusion of the field research phase in 2001. Models will be updated using the data obtained during eight years and will assist in the understanding of complex variables that affect grizzly bears.

  17. Guidelines for residential commissioning

    Energy Technology Data Exchange (ETDEWEB)

    Wray, Craig P.; Walker, Iain S.; Sherman, Max H.

    2003-01-31

    Currently, houses do not perform optimally or even as many codes and forecasts predict, largely because they are field assembled and there is no consistent process to identify problems or to correct them. Residential commissioning is a solution to this problem. This guide is the culmination of a 30-month project that began in September 1999. The ultimate objective of the project is to increase the number of houses that undergo commissioning, which will improve the quality, comfort, and safety of homes for California citizens. The project goal is to lay the groundwork for a residential commissioning industry in California focused on end-use energy and non-energy issues. As such, we intend this guide to be a beginning and not an end. Our intent is that the guide will lead to the programmatic integration of commissioning with other building industry processes, which in turn will provide more value to a single site visit for people such as home energy auditors and raters, home inspectors, and building performance contractors. Project work to support the development of this guide includes: a literature review and annotated bibliography, which facilitates access to 469 documents related to residential commissioning published over the past 20 years (Wray et al. 2000), an analysis of the potential benefits one can realistically expect from commissioning new and existing California houses (Matson et al. 2002), and an assessment of 107 diagnostic tools for evaluating residential commissioning metrics (Wray et al. 2002). In this guide, we describe the issues that non-experts should consider in developing a commissioning program to achieve the benefits we have identified. We do this by providing specific recommendations about: how to structure the commissioning process, which diagnostics to use, and how to use them to commission new and existing houses. Using examples, we also demonstrate the potential benefits of applying the recommended whole-house commissioning approach to

  18. Short-term fate of rehabilitated orphan black bears released in New Hampshire

    OpenAIRE

    Smith, Wesley E.; Pekins, Peter J.; Timmins, Andrew A.; Kilham, Benjamin

    2016-01-01

    We evaluated the release of rehabilitated, orphan black bears (Ursus americanus) in northern New Hampshire. Eleven bears (9 males, 2 females; 40–45 kg) were outfitted with GPS radio-collars and released during May and June of 2011 and 2012. Bears released in 2011 had higher apparent survival and were not observed or reported in any nuisance behavior, whereas no bears released in 2012 survived, and all were involved in minor nuisance behavior. Analysis of GPS locations indicated that bears in ...

  19. Commission on Legal Matters

    CERN Multimedia

    Staff Association

    2016-01-01

    What is a commission within the Staff Association (SA)? A commission is a working group of the CERN Staff Council, led by a staff representative. The commission is composed mainly of staff representatives, but interested members of the SA can apply to participate in the work of a commission. What is the commission on legal matters? The commission on legal matters works on texts governing the employment conditions of staff (Employed Members of Personnel and Associated Members of Personnel). This covers legal documents such as the Staff Rules and Regulations, administrative and operational circulars, as well as any other document relating to employment conditions. How is the work organised in this commission? The revision process of the text is generally done along following lines: The HR department, and its legal experts, proposes new texts or modifications to existing texts. A schedule for the study of these texts is established each year and this calendar by the commission to plan its work. The new or modi...

  20. 76 FR 77981 - Build-A-Bear Workshop, Inc., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2011-12-15

    ... COMMISSION Build-A-Bear Workshop, Inc., Provisional Acceptance of a Settlement Agreement and Order AGENCY... Agreement with Build-A-Bear Workshop, Inc., containing a civil penalty of $600,000.00. DATES: Any interested... Agreement 1. In accordance with 16 CFR 1118.20, Build-A-Bear Workshop, Inc. (``Build-A-Bear'') and staff of...

  1. 78 FR 2990 - Bear Creek Storage Company, L.L.C.; Notice of Request Under Blanket Authorization

    Science.gov (United States)

    2013-01-15

    ... Energy Regulatory Commission Bear Creek Storage Company, L.L.C.; Notice of Request Under Blanket Authorization Take notice that on December 21, 2012, Bear Creek Storage Company, L.L.C. (Bear Creek), 569... the Natural Gas Act, and Bear Creek's blanket certificate issued in Docket No. CP10-28-000 on January...

  2. Nuclear Regulatory Commission Issuances

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    This report includes the issuances received during the specified period from the Commission (CLI), the Atomic Safety and Licensing Boards (LBP), the Administrative Law Judges (ALJ), the Directors Decisions (DD), and the Decisions on Petitions for Rulemaking (DPRM).

  3. Nuclear Regulatory Commission issuances

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    This report includes the issuances received during the specified period from Commission (CLI), the Atomic Safety and Licensing Boards (LBP), the Administrative Law Judges (ALJ), the Directors` Decisions (DD), and the Denials of Petitions for Rulemaking (DPRM).

  4. 76 FR 8728 - Bear Creek Hydro Associates, LLC; Notice of Preliminary Permit Application Accepted for Filing...

    Science.gov (United States)

    2011-02-15

    ... Energy Regulatory Commission Bear Creek Hydro Associates, LLC; Notice of Preliminary Permit Application... 22, 2010, the Bear Creek Hydro Associates, LLC filed an application for a preliminary permit, pursuant to section 4(f) of the Federal Power Act (FPA), proposing to study the ] feasibility of the Bear...

  5. 78 FR 25484 - License Amendment for Anadarko Petroleum Corporation, Bear Creek Facility, Converse County, Wyoming

    Science.gov (United States)

    2013-05-01

    ... COMMISSION License Amendment for Anadarko Petroleum Corporation, Bear Creek Facility, Converse County... compliance (POC) wells and the deletion of License Condition (LC) No. 47 for its Bear Creek Uranium Mill...: [email protected] . SUPPLEMENTARY INFORMATION: I. Background The Bear Creek Uranium Mill operated...

  6. Commissioning the CMS experiment

    CERN Document Server

    Camporesi, T.

    2008-01-01

    The CMS experiment is getting ready to take data at the LHC accelerator at CERN. Due to late delivery of the experimental caverns the detector had to be pre-assembled on the surface and lowered in large segments. This has constrained the commissioning strategy of the experiment. Global commissioning has started in Spring of 2007 and has progressed in parallel with the construction and assembly of detector and services underground. This paper describes the strategy adopted in order to commission components of the system in incremental steps in order to be ready to accept collisions from LHC with a well debugged and understood system, including the detector, acquisition system, trigger, software, computing and data shipping.

  7. The Impact of Roads on the Demography of Grizzly Bears in Alberta

    OpenAIRE

    John Boulanger; Stenhouse, Gordon B.

    2014-01-01

    One of the principal factors that have reduced grizzly bear populations has been the creation of human access into grizzly bear habitat by roads built for resource extraction. Past studies have documented mortality and distributional changes of bears relative to roads but none have attempted to estimate the direct demographic impact of roads in terms of both survival rates, reproductive rates, and the interaction of reproductive state of female bears with survival rate. We applied a combinati...

  8. Nuclear Regulatory Commission issuances

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    This report includes the issuances received during the specified period from the Commission (CLI), the Atomic Safety and Licensing Boards (LBP), the Administrative Law Judges (ALJ), the Directors` Decisions (DD), and the Decisions on Petitions for Rulemaking (DPRM). The summaries and headnotes preceding the opinions reported herein are not to be deemed a part of those opinions or have any independent legal significance.

  9. Nuclear Regulatory Commission Issuances

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    This report includes the issuances received during the specified period from the Commission (CLI), the Atomic Safety and Licensing Boards (LBP), the Administrative Law Judges (ALJ), the Directors Decisions (DD), and the Denials of Petitions for Rulemaking (DPRM). The summaries and headnotes preceding the opinions reported herein are not to be deemed a part of those opinions or have any independent legal significance.

  10. Ancient DNA reveals differences in behaviour and sociality between brown bears and extinct cave bears.

    Science.gov (United States)

    Fortes, Gloria G; Grandal-d'Anglade, Aurora; Kolbe, Ben; Fernandes, Daniel; Meleg, Ioana N; García-Vázquez, Ana; Pinto-Llona, Ana C; Constantin, Silviu; de Torres, Trino J; Ortiz, Jose E; Frischauf, Christine; Rabeder, Gernot; Hofreiter, Michael; Barlow, Axel

    2016-10-01

    Ancient DNA studies have revolutionized the study of extinct species and populations, providing insights on phylogeny, phylogeography, admixture and demographic history. However, inferences on behaviour and sociality have been far less frequent. Here, we investigate the complete mitochondrial genomes of extinct Late Pleistocene cave bears and middle Holocene brown bears that each inhabited multiple geographically proximate caves in northern Spain. In cave bears, we find that, although most caves were occupied simultaneously, each cave almost exclusively contains a unique lineage of closely related haplotypes. This remarkable pattern suggests extreme fidelity to their birth site in cave bears, best described as homing behaviour, and that cave bears formed stable maternal social groups at least for hibernation. In contrast, brown bears do not show any strong association of mitochondrial lineage and cave, suggesting that these two closely related species differed in aspects of their behaviour and sociality. This difference is likely to have contributed to cave bear extinction, which occurred at a time in which competition for caves between bears and humans was likely intense and the ability to rapidly colonize new hibernation sites would have been crucial for the survival of a species so dependent on caves for hibernation as cave bears. Our study demonstrates the potential of ancient DNA to uncover patterns of behaviour and sociality in ancient species and populations, even those that went extinct many tens of thousands of years ago. © 2016 John Wiley & Sons Ltd.

  11. Commissioning of the LHC

    CERN Multimedia

    CERN. Geneva

    2007-01-01

    The LHC construction is now approaching the end and it is now time to prepare for commissioning with beam. The behavior of a proton storage ring is much different to that of LEP, which profited from strong radiation damping to keep the beam stable. Our last experience with a hadron collider at CERN goes back more than 15 years when the proton-antiproton collider last operated. Ppbar taught us a lot about the machine physics of bunched beam proton storage rings and was essential input for the design of the LHC. After a short presentation of where we stand today with machine installation and hardware commissioning, I will discuss the main machine physics issues that will have to be dealt with in the LHC.

  12. FLITECAM: early commissioning results

    Science.gov (United States)

    Logsdon, Sarah E.; McLean, Ian S.; Becklin, Eric E.; Dunham, Edward W.; Hamilton, Ryan T.; Johnson, Christopher; Milburn, Jennifer W.; Savage, Maureen L.; Shenoy, Sachindev S.; Smith, Erin C.; Vacca, William D.

    2014-07-01

    We present a status report and early commissioning results for FLITECAM, the 1-5 micron imager and spectrometer for SOFIA (the Stratospheric Observatory for Infrared Astronomy). In February 2014 we completed six flights with FLITECAM mounted in the FLIPO configuration, a co-mounting of FLITECAM and HIPO (High-speed Imaging Photometer for Occultations; PI Edward W. Dunham, Lowell Observatory). During these flights, the FLITECAM modes from ~1-4 μm were characterized. Since observatory verification flights in 2011, several improvements have been made to the FLITECAM system, including the elimination of a light leak in the FLITECAM filter wheel enclosure, and updates to the observing software. We discuss both the improvements to the FLITECAM system and the results from the commissioning flights, including updated sensitivity measurements. Finally, we discuss the utility of FLITECAM in the FLIPO configuration for targeting exoplanet transits.

  13. Validation of the American Joint Commission on Cancer (8th edition) changes for patients with stage III gastric cancer: survival analysis of a large series from a Specialized Eastern Center.

    Science.gov (United States)

    Lu, Jun; Zheng, Chao-Hui; Cao, Long-Long; Ling, Shao-Wei; Li, Ping; Xie, Jian-Wei; Wang, Jia-Bin; Lin, Jian-Xian; Chen, Qi-Yue; Lin, Mi; Tu, Ru-Hong; Huang, Chang-Ming

    2017-10-01

    The 8th edition of the TNM was released in 2016 and included major revisions, especially for stage III. We aimed to compare the prognostic value of the 7th and 8th editions of the AJCC TNM classification for stage III gastric cancer. Clinical data from 1557 patients operated on for stage III gastric cancer according to the 7th edition between 2007 and 2014 were analyzed and compared using the 7th and 8th TNM classifications. A proposed staging system was established, and the three systems were compared in terms of prognostic performance. The stage shifted for 669 (42.96%) patients. It shifted from IIIA to IIIB (one patient, 0.06%), IIIB to IIIA (230 patients, 14.8%), IIIB to IIIC (94 patients, 6.0%), and IIIC to IIIB (344 patients, 22.1%). However, the new AJCC subgroupings did not prove distinctive for survival levels between T3N3aM0 (stage IIIB) and T3N3bM0 (stage IIIC) or between T4aN3aM0 (stage IIIB) and T4aN3bM0 (stage IIIC) when <30 lymph nodes (LNs) were resected. The performance of the 8th edition (c-index, 0.614; 95% confidence interval [CI], 0.596-0.633) revealed no relevant improvement compared to the 7th edition (c-index, 0.624; 95% CI, 0.605-0.643). The proposed staging system generated the best prognostic stratification. The 8th TNM edition may not provide better accuracy in predicting the prognosis of stage III gastric cancer. The proposed staging system, comprised of a combination of the number of LNs harvested and the 7th and 8th AJCC classifications, may improve predictive capacities for stage III gastric cancer. © 2017 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

  14. Nuclear Regulatory Commission issuances

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This report includes the issuances received during the April 1996 reporting period from the Commission, the Atomic Safety and Licensing Boards, the Administrative Law Judges, the Directors` Decisions, and the Decisions on Petitions for Rulemaking. Included are issuances pertaining to: (1) Yankee Nuclear Power Station, (2) Georgia Tech Research Reactor, (3) River Bend Station, (4) Millstone Unit 1, (5) Thermo-Lag fire barrier material, and (6) Louisiana Energy Services.

  15. Commission 8: Astrometry

    OpenAIRE

    Platais, Imants; I. Kumkova, Irina; Costa, E.; C. Ducourant; W. Evans, D.; Jin, W.-J.; G. Lattanzi, M.; Lu, C. -L.; Scholz, R. -D.; Sôma, M.

    2007-01-01

    This triennial report from Commission 8 covers astrometry-related matters for objects ranging from Solar system bodies out to Milky Way stars and QSOs at cosmological distances. This enormous range of distances is needed to establish, maintain, and improve the metric of the visible Universe–a very challenging effort since everything is moving. The progress of astrometry in the last three years (2002-2005) is reflected here. To locate the references, the reader is advised to check the NASA ADS...

  16. The international joint commission

    OpenAIRE

    Clamens, Murray

    2005-01-01

    For over 92 years the International Joint Commission (IJC), United States and Canada, has effectively served the two nations in approving and providing continuous oversight of water resource projects along the 5000-mile common border, in assisting the governments in preventing and resolving issues and disagreements regarding the use of these waters, and in addressing other environmental issues affecting or potentially affecting one or both of the countries. During the first years of the 20th...

  17. Commission on Social Security

    CERN Multimedia

    Staff Association

    2010-01-01

    A commission studying past, present, and future social stakes ! For many years we have been hearing about the problems of funding of health insurance benefits in our different Member States. At CERN we are not totally immune from this problem.  To start with, let us recall that we have a mutual-benefit scheme which covers everyone for the consequences of the uncertainties in life (illness and accidents). The rules of our scheme are established by CERN in the framework of a sub-group of the Standing Concertation Committee, the CERN Health Insurance Scheme Board (CHISB), which is also in charge of managing the scheme.  The work of the “ProtSoc” (Protection Sociale – Social Security) commission, as we like to call it at the Staff Association, is to help your representatives on the CHISB, by preparing together with them the subjects and positions to be put forward and defended. This commission, which groups together the staff delegates who wish to invest their ...

  18. Commission 35: Stellar Constitution

    Science.gov (United States)

    D'Antona, Francesca; Charbonnel, Corinne; Dziembowski, Wojciech; Fontaine, Gilles; Larson, Richard B.; Lattanzio, John; Liebert, Jim W.; Müller, Ewald; Weiss, Achim; Yungelson, Lev R.

    The Commission home page is maintained by Claus Leitherer and contains general information on the Commission structure and activities, including links to stellar structure resources that were made available by the owners. The resources contain evolutionary tracks and isochrones from various groups, nuclear reaction, EOS, and opacity data as well as links to main astronomical journals. As a routine activity, the Organizing Committee has commented on and ranked proposals for several IAU sponsored meetings. Our Commission acted as one of the coordinating bodies of a Symposium held at the IAU XXVI General Assembly in Prague, August 2006, (IAU Symposium No. 239 Convection in Astrophysics, and participated in the organization of the following Joint Discussions: JD05 Calibrating the Top of the Stellar Mass-Luminosity Relation, JD06 Neutron Stars and Black Holes in Star Clusters, JD08 Solar and Stellar Activity Cycles, JD11 Pre-Solar Grains as Astrophysical Tools; JD14 Modelling Dense Stellar Systems; and JD17 Highlights of Recent Progress in the Seismology of the Sun and Sun-like Stars.

  19. Teddy Bear Stories

    DEFF Research Database (Denmark)

    van Leeuwen, Theo; Caldas-Coulthardt, Carmen

    2014-01-01

    This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...... about their childhood teddy bears, and children's accounts of what they do with teddy bears, both written for school and told 'out of school', The chapter sees teddy bears as artefacts that provide a cultural channeling for the child's need of a transitional object and argues that the meanings of teddy...... bears have traditionally centred on interpersonal relations within the nuclear family, but have recently been institutionalized and commercialized....

  20. Development of a pan-Arctic monitoring plan for polar bears: Background paper

    Science.gov (United States)

    Vongraven, Dag; Peacock, Lily

    2011-01-01

    Polar bears (Ursus maritimus), by their very nature, and the extreme, remote environment in which they live, are inherently difficult to study and monitor. Monitoring polar bear populations is both arduous and costly and, to be effective, must be a long-term commitment. There are few jurisdictional governments and management boards with a mandate for polar bear research and management, and many have limited resources. Although population monitoring of polar bears has been a focus to some degree within most jurisdictions around the Arctic, of the 19 subpopulations recognised by the IUCN/Species Survival Commission Polar Bear Specialist Group (PBSG), adequate scientific trend data exist for only three of the subpopulations, fair trend data for five and poor or no trend data for the remaining 11 subpopulations (PBSG 2010a). There are especially critical knowledge gaps for the subpopulations in East Greenland, in the Russian Kara and Laptev seas, and in the Chukchi Sea, which is shared between Russia and the United States. The range covered by these subpopulations represents a third of the total area (approx. 23 million km2) of polar bears’ current range, and more than half if the Arctic Basin is included. If we use popular terms, we know close to nothing about polar bears in this portion of their range.As summer sea-ice extent, and to a lesser degree, spring-time extent, continues to retreat, outpacing model forecasts (Stroeve et al. 2007, Pedersen et al. 2009), polar bears face the challenge of adapting to rapidly changing habitats. There is a need to use current and synthesised information across the Arctic, and to develop new methods that will facilitate monitoring to generate new knowledge at a pan-Arctic scale. The circumpolar dimension can be lost when efforts are channelled into regional monitoring. Developing and implementing a plan that harmonises local, regional and global efforts will increase our power to detect and understand important trends for polar

  1. Polar bears and sea ice habitat change

    Science.gov (United States)

    Durner, George M.; Atwood, Todd C.; Butterworth, Andy

    2017-01-01

    The polar bear (Ursus maritimus) is an obligate apex predator of Arctic sea ice and as such can be affected by climate warming-induced changes in the extent and composition of pack ice and its impacts on their seal prey. Sea ice declines have negatively impacted some polar bear subpopulations through reduced energy input because of loss of hunting habitats, higher energy costs due to greater ice drift, ice fracturing and open water, and ultimately greater challenges to recruit young. Projections made from the output of global climate models suggest that polar bears in peripheral Arctic and sub-Arctic seas will be reduced in numbers or become extirpated by the end of the twenty-first century if the rate of climate warming continues on its present trajectory. The same projections also suggest that polar bears may persist in the high-latitude Arctic where heavy multiyear sea ice that has been typical in that region is being replaced by thinner annual ice. Underlying physical and biological oceanography provides clues as to why polar bear in some regions are negatively impacted, while bears in other regions have shown no apparent changes. However, continued declines in sea ice will eventually challenge the survival of polar bears and efforts to conserve them in all regions of the Arctic.

  2. A Guide to Building Commissioning

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.

    2011-09-01

    Commissioning is the process of verifying that a building's heating, ventilation, and air conditioning (HVAC) and lighting systems perform correctly and efficiently. Without commissioning, system and equipment problems can result in higher than necessary utility bills and unexpected and costly equipment repairs. This report reviews the benefits of commissioning, why it is a requirement for Leadership in Energy and Environmental Design (LEED) certification, and why building codes are gradually adopting commissioning activities into code.

  3. Virtual micro MLC commissioning.

    Science.gov (United States)

    Drever, Laura; Dickof, Peter

    2005-01-01

    The resolution of multileaf collimators (MLCs) is limited by their finite leaf width. A commercial package (HD-270) uses 3D couch translation and leaf adjustments to emulate smaller leaf widths. In this paper, we report on the commissioning of this feature using software testing, dial gauge measurements, and film dosimetry. We also identify a variety of limitations: software bugs and truncation artifacts, MLC leaf positioning uncertainties (random variations, systematic gantry dependence and backlash), and uncertainties in couch positioning. These reduce the capabilities of this implementation below that achievable theoretically.

  4. Bearing Health Monitoring

    Directory of Open Access Journals (Sweden)

    S. Shah

    2016-09-01

    Full Text Available Health monitoring of bearings is a widely researched topic and has been attempted by analysing acoustic, thermal and vibration signatures. The methods usually require signal of a healthy bearing to be used as a baseline. This limits their use in practical scenarios. This work proposes a kurtosis based baseline free method of analysing vibration signals to identify the bearing which has generated a fault. It then reports a detailed study on empirical mode decomposition technique for extracting intrinsic mode functions and suggests a set of steps which are necessary and sufficient for the purpose of bearing health monitoring. Thereafter, it compares a few dominant frequencies with the expected ones based on known bearing dimensions. This process has been shown to be fairly accurate in identifying the location of fault in a bearing.

  5. Bearings: Technology and needs

    Science.gov (United States)

    Anderson, W. J.

    1982-01-01

    A brief status report on bearing technology and present and near-term future problems that warrant research support is presented. For rolling element bearings a material with improved fracture toughness, life data in the low Lambda region, a comprehensive failure theory verified by life data and incorporated into dynamic analyses, and an improved corrosion resistant alloy are perceived as important needs. For hydrodynamic bearings better definition of cavitation boundaries and pressure distributions for squeeze film dampers, and geometry optimization for minimum power loss in turbulent film bearings are needed. For gas film bearings, foil bearing geometries that form more nearly optimum film shapes for maximum load capacity, and more effective surface protective coatings for high temperature operation are needed.

  6. Eastern slopes grizzly bear project : project update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    This report updates a study to examine the cumulative effects of human activities on the grizzly bears in the central Canadian Rockies. The project was initiated in 1994 to acquire accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of the study is used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers monitored 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers worked with representatives from Husky Oil and Rigel Energy on the development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over eight years indicates that the grizzly bears have few and infrequent offspring. Using the information gathered thus far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears suffer from high mortality, and the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The research concluded in November 2001 provides sufficient information to accurately asses the status of the grizzly bear population and habitat. The data will be analyzed and integrated in 2002 into models that reflect the variables affecting grizzly bears and a final report will be published.

  7. Synthesis of N-substituted acetamide derivatives of azinane-bearing ...

    African Journals Online (AJOL)

    oxadiazole heterocyclic cores and to evaluate their .... Figure 1: Protocol for synthesis of N-substituted acetamide derivatives of azinane bearing 1,3,4- oxadiazole. Reagents ...... Commission of Pakistan for financial support. Conflict of Interest.

  8. Polar bears, Ursus maritimus

    Science.gov (United States)

    Rode, Karyn D.; Stirling, Ian

    2017-01-01

    Polar bears are the largest of the eight species of bears found worldwide and are covered in a pigment-free fur giving them the appearance of being white. They are the most carnivorous of bear species consuming a high-fat diet, primarily of ice-associated seals and other marine mammals. They range throughout the circumpolar Arctic to the southernmost extent of seasonal pack ice.

  9. One-dimensional heat conduction equation of the polar bear hair

    Directory of Open Access Journals (Sweden)

    Zhu Wei-Hong

    2015-01-01

    Full Text Available Hairs of a polar bear (Ursus maritimus possess special membrane-pore structure. The structure enables the polar bear to survive in the harsh Arctic regions. In this paper, the membrane-pore structure be approximately considered as fractal space, 1-D heat conduction equation of the polar bear hair is established and the solution of the equation is obtained.

  10. Density dependence, whitebark pine, and vital rates of grizzly bears

    Science.gov (United States)

    van Manen, Frank T.; Haroldson, Mark A.; Bjornlie, Daniel D; Ebinger, Michael R.; Thompson, Daniel J.; Costello, Cecily M; White, Gary C.

    2016-01-01

    Understanding factors influencing changes in population trajectory is important for effective wildlife management, particularly for populations of conservation concern. Annual population growth of the grizzly bear (Ursus arctos) population in the Greater Yellowstone Ecosystem, USA has slowed from 4.2–7.6% during 1983–2001 to 0.3–2.2% during 2002–2011. Substantial changes in availability of a key food source and bear population density have occurred. Whitebark pine (Pinus albicaulis), the seeds of which are a valuable but variable fall food for grizzly bears, has experienced substantial mortality primarily due to a mountain pine beetle (Dendroctonus ponderosae) outbreak that started in the early 2000s. Positive growth rates of grizzly bears have resulted in populations reaching high densities in some areas and have contributed to continued range expansion. We tested research hypotheses to examine if changes in vital rates detected during the past decade were more associated with whitebark pine decline or, alternatively, increasing grizzly bear density. We focused our assessment on known-fate data to estimate survival of cubs-of-the-year (cubs), yearlings, and independent bears (≥2 yrs), and reproductive transition of females from having no offspring to having cubs. We used spatially and temporally explicit indices for grizzly bear density and whitebark pine mortality as individual covariates. Models indicated moderate support for an increase in survival of independent male bears over 1983–2012, whereas independent female survival did not change. Cub survival, yearling survival, and reproductive transition from no offspring to cubs all changed during the 30-year study period, with lower rates evident during the last 10–15 years. Cub survival and reproductive transition were negatively associated with an index of grizzly bear density, indicating greater declines where bear densities were higher. Our analyses did not support a similar relationship for the

  11. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting...

  12. Polar bear management in Alaska 1997-2000

    Science.gov (United States)

    Schliebe, Scott L.; Bridges, John W.; Evans, Thomas J.; Fischbach, Anthony S.; Kalxdorff, Susanne B.; Lierheimer, Lisa J.; Lunn, Nicholas J.; Schliebe, Scott L.; Born, Erik W.; Lunn, Nicholas J.; Schliebe, Scott L.; Born, Erik W.

    2002-01-01

    Since the Twelfth Working Meeting of the IUCN/SSC Polar Bear Specialist Group in 1997, a number of changes in the management of polar bears have occurred in Alaska. On October 16, 2000, the governments of the United States and the Russian Federation signed the “Agreement on the Conservation and Management of the Alaska-Chukotka Polar Bear Population.” This agreement provides substantial benefits for the effective conservation of polar bears shared between the U.S. and Russia. It will require enactment of enabling legislation by the U.S. Congress and other steps by Russia before the agreement has the force of law. A copy of the agreement is included as Appendix 1 to this report. Also, during this period, regulations were developed to implement 1994 amendments to the Marine Mammal Protection Act (MMPA), which allow polar bear trophies taken in approved Canadian populations by U.S. citizens to be imported into the U.S. A summary of the regulatory actions and a table listing populations approved for importation and the number of polar bears imported into the U.S. since 1997 is included in this report. Regarding oil and gas activities in polar bear habitat, three sets of regulations were published authorizing the incidental, non-intentional, taking of small numbers of polar bears concurrent to oil and gas activities.Cooperation continued with the Alaska Nanuuq Commission, representing the polar bear hunting communities in Alaska, as well as with the North Slope Borough and the Inuvialuit Game Council in their agreement for the management of the Southern Beaufort Sea polar bear population. Harvest summaries and technical assistance in designing and assistance in conducting a National Park Service/Alaska Nanuuq Commission study to collect traditional ecological knowledge of polar bear habitat use in Chukotka were provided. In addition, a long-range plan was developed to address and minimize polar bear-human conflicts in North Slope communities.We continued to monitor

  13. The salmon bears: giants of the great bear rainforest

    National Research Council Canada - National Science Library

    McAllister, I; Read, N

    2010-01-01

    The Salmon Bears explores the delicate balance that exists between the grizzly, black and spirit bears of the Great Bear Rainforest and their natural environment on the central coast of British Columbia...

  14. Long-term haemodialysis survival

    DEFF Research Database (Denmark)

    Heaf, James; Nielsen, Arne Høj; Hansen, Henrik Post

    2012-01-01

    Haemodialysis (HD) treatment for end-stage renal disease bears a poor prognosis. We present a case of a patient who, apart from two transplant periods lasting 8 months in all, was treated with conventional in-centre HD three times a week and who survived for 41 years. Patients should be aware tha...

  15. Commissioning a materials research laboratory

    Energy Technology Data Exchange (ETDEWEB)

    SAVAGE,GERALD A.

    2000-03-28

    This presentation covers the process of commissioning a new 150,000 sq. ft. research facility at Sandia National Laboratories. The laboratory being constructed is a showcase of modern design methods being built at a construction cost of less than $180 per sq. ft. This is possible in part because of the total commissioning activities that are being utilized for this project. The laboratory's unique approach to commissioning will be presented in this paper. The process will be followed through from the conceptual stage on into the actual construction portion of the laboratory. Lessons learned and cost effectiveness will be presented in a manner that will be usable for others making commissioning related decisions. Commissioning activities at every stage of the design will be presented along with the attributed benefits. Attendees will hear answers to the what, when, who, and why questions associated with commissioning of this exciting project.

  16. A cytotoxic Petiveria alliacea dry extract induces ATP depletion and decreases β-F1-ATPase expression in breast cancer cells and promotes survival in tumor-bearing mice

    Directory of Open Access Journals (Sweden)

    John F. Hernández

    Full Text Available Abstract Metabolic plasticity in cancer cells assures cell survival and cell proliferation under variable levels of oxygen and nutrients. Therefore, new anticancer treatments endeavor to target such plasticity by modifying main metabolic pathways as glycolysis or oxidative phosphorylation. In American traditional medicine Petiveria alliacea L., Phytolaccacea, leaf extracts have been used for leukemia and breast cancer treatments. Herein, we study cytotoxicity and antitumoral effects of P. alliacea extract in tumor/non-tumorigenic cell lines and murine breast cancer model. Breast cancer cells treated with P. alliacea dry extract showed reduction in β-F1-ATPase expression, glycolytic flux triggering diminished intracellular ATP levels, mitochondrial basal respiration and oxygen consumption. Consequently, a decline in cell proliferation was observed in conventional and three-dimension spheres breast cancer cells culture. Additionally, in vivo treatment of BALB/c mice transplanted with the murine breast cancer TS/A tumor showed that P. alliacea extract via i.p. decreases the primary tumor growth and increases survival in the TS/A model.

  17. Model Commissioning Plan and Guide Specifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The objectives of Model Commissioning Plan and Guide Specifications are to ensure that the design team applies commissioning concepts to the design and prepares commissioning specifications and a commission plan for inclusion in the bid construction documents.

  18. Touchdown Ball-Bearing System for Magnetic Bearings

    Science.gov (United States)

    Kingsbury, Edward P.; Price, Robert; Gelotte, Erik; Singer, Herbert B.

    2003-01-01

    The torque-limited touchdown bearing system (TLTBS) is a backup mechanical-bearing system for a high-speed rotary machine in which the rotor shaft is supported by magnetic bearings in steady-state normal operation. The TLTBS provides ball-bearing support to augment or supplant the magnetic bearings during startup, shutdown, or failure of the magnetic bearings. The TLTBS also provides support in the presence of conditions (in particular, rotational acceleration) that make it difficult or impossible to control the magnetic bearings or in which the magnetic bearings are not strong enough (e.g., when the side load against the rotor exceeds the available lateral magnetic force).

  19. Commissioning of NSLS-II

    Energy Technology Data Exchange (ETDEWEB)

    Willeke, F.

    2015-05-03

    NSLS-II, the new 3rd generation light source at BNL was designed for a brightness of 1022 photons s-1mm-2mrad-2 (0.1%BW)-1. It was constructed between 2009 and 2014. The storage ring was commissioned in April 2014 which was followed by insertion device and beamline commissioning in the fall of 2014. All ambitious design parameters of the facility have already been achieved except for commissioning the full beam intensity of 500mA which requires more RF installation. This paper reports on the results of commissioning.

  20. National Knowledge Commission

    Science.gov (United States)

    Pitroda, Sam

    2007-04-01

    India's National Knowledge Commission (NKC) established by the prime minister is focused on building institutions and infrastructure in Education, Science and Technology, Innovation etc. to meet the challenges of the knowledge economy in the 21st century and increase India's competitive advantage in the global market. India today stands poised to reap the benefits of a rapidly growing economy and a major demographic advantage, with 550 million young people below the age of 25 years, the largest in the world. The NKC is focused on five critical areas of knowledge related to access, concepts, creation, applications and services. This includes a variety of subject areas such as language, translations, libraries, networks, portals, affirmative action, distance learning, intellectual property, Entrepreneurship, application in Agriculture, health, small and medium scale industries, e-governance etc. One of the keys to this effort is to build a national broadband gigabit of networks of 500 nodes to connect universities, Libraries, Laboratories, Hospitals, Agriculture institutions etc. to share resources and collaborate on multidisciplinary activities. This presentation will introduce the NKC, discuss methodology, subject areas, specific recommendation and outline a plan to build knowledge networks and specifics on network architecture, applications, and utilities.

  1. LEIR commissioning successfully completed

    CERN Multimedia

    2006-01-01

    An important milestone has been passed in the preparation of the injector complex to supply ions to the LHC experiments. The LEIR lead-ion beam, seen on one of the control screens just before the PS injection region. The Low-Energy Ion Ring - LEIR for short - has passed its first tests with flying colours. On 12 May, the ring that will accumulate lead ions for the LHC was shut down after seven months of tests (see Bulletin 44/2005). 'The commissioning phase was a resounding success,' enthuses a satisfied Michel Chanel, head of the LEIR construction project. After several months of fine-tuning, the LEIR team has achieved its aim of producing the kind of beam required for first lead-ion collisions in the LHC in 2008. This involved creating bunches containing 230 million ions, in line with the specifications for those first beams. This success can be put down to the machine's outstanding design and components. 'It's a great achivement by all the teams involved in the machine's construction,' underlines Christian...

  2. Commissioning the SNO+ Detector

    Science.gov (United States)

    Caden, E.; Coulter, I.; SNO+ Collaboration

    2017-09-01

    SNO+ is a multipurpose liquid scintillator neutrino experiment based at SNOLAB in Sudbury, Ontario, Canada. The experiment’s main physics goal is a search for neutrinoless double beta decay in Tellurium-130, but SNO+ will also study low energy solar neutrinos, geo- and reactor-antineutrinos, among other topics. We are reusing much of the hardware from the original SNO experiment, but significant work has taken place to transform the heavy water detector into a liquid scintillator detector. We present upgrades and improvements to the read-out electronics and trigger system to handle the higher data rates expected by a scintillator experiment. We show the successful installation and testing of a hold-down rope net for the acrylic vessel to counter-act the buoyancy of organic liquid scintillator. We also describe the new scintillator process plant and cover gas systems that have been constructed to achieve the purification necessary to meet our physics goals. We are currently commissioning the experiment with ultra-pure water in preparation for filling with scintillator in early 2017 and present the current status of this work.

  3. ROS Installation and Commissioning

    CERN Multimedia

    Gorini, B

    The ATLAS Readout group (a sub-group of TDAQ) has now completed the installation and commissioning of all of the Readout System (ROS) units. Event data from ATLAS is initially handled by detector specific hardware and software, but following a Level 1 Accept the data passes from the detector specific Readout Drivers (RODs) to the ROS, the first stage of the central ATLAS DAQ. Within the final ATLAS TDAQ system the ROS stores the data and on request makes it available to the Level 2 Trigger (L2) processors and to the Event Builder (EB) as required. The ROS is implemented as a large number of PCs housing custom built cards (ROBINs) and running custom multi-threaded software. Each ROBIN card (shown below) contains buffer memories to store the data, plus a field programmable gate array ( FPGA ) and an embedded PowerPC processor for management of the memories and data requests, and is implemented as a 64-bit 66 MHz PCI card. Both the software and the ROBIN cards have been designed and developed by the Readout g...

  4. Commissioning a Hodoscope Detector

    Science.gov (United States)

    Lulis, Andrew; Merhi, Abdul; Frank, Nathan; Bazin, Daniel; Smith, Jenna; Thoennessen, Michael; MoNA Collaboration

    2013-10-01

    Experiments on neutron-rich nuclei are interesting since they test the limits of current nuclear theory. One method to populate neutron-rich nuclei is to utilize the (d,p) reaction in which the beam nucleus picks up a neutron from the target. This heavier nucleus immediately emits a neutron resulting in the same nucleus as the beam but with lower energy. One challenge is to discriminate decay products from unreacted beam particles by their difference in energy. A hodoscope was recently installed at the National Superconducting Cyclotron Laboratory (NSCL) as part of the MoNA-LISA-Sweeper setup to make experiments using a (d,p) reaction possible. The hodoscope is a 5 × 5 scintillator array consisting of CsI(Na) crystals with a resolution of better than 1%. This presentation will describe the recently commissioned detector and the results of the first data analysis using this device. Work supported by Augustana College and the National Science Foundation grant #0969173.

  5. Ultra-precision bearings

    CERN Document Server

    Wardle, F

    2015-01-01

    Ultra-precision bearings can achieve extreme accuracy of rotation, making them ideal for use in numerous applications across a variety of fields, including hard disk drives, roundness measuring machines and optical scanners. Ultraprecision Bearings provides a detailed review of the different types of bearing and their properties, as well as an analysis of the factors that influence motion error, stiffness and damping. Following an introduction to basic principles of motion error, each chapter of the book is then devoted to the basic principles and properties of a specific type of bearin

  6. Division X, XII / Commission 40, 41 / Working Group Radio Astronomy

    NARCIS (Netherlands)

    Kellermann, Kenneth; Orchiston, Wayne; Davies, Rod; Gurvits, Leonid; Ishiguro, Masato; Lequeux, James; Swarup, Govind; Wall, Jasper; Wielebinski, Richard; van Woerden, Hugo

    The IAU Working Group on Historical Radio Astronomy (WGHRA) was formed at the 2003 General Assembly of the IAU as a Joint Working Group of Commissions 40 (Radio Astronomy) and 41 (History of Astronomy), in order to: a) assemble a master list of surviving historically-significant radio telescopes and

  7. Management recommendations: Bear River

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a review of land management practices at the Bear River Migratory Bird Refuge, by a land use specialist. Recommendations, time frame and additional...

  8. DW_BEAR

    Data.gov (United States)

    Department of Homeland Security — Subset of BEAR (Bi-Weekly Examination Analysis and Reporting) data used for financial audit remediation reporting within the Coast Guard Business Intelligence (CGBI)...

  9. Black bears in Arkansas: Characteristics of a successful translocation

    Science.gov (United States)

    Smith, Kimberly G.; Clark, Joseph D.

    1994-01-01

    In 1958, the Arkansas Game and Fish Commission began translocating black bears (Ursus americanus) from Minnesota to the Interior Highlands (Ozark and Ouachita mountains) of Arkansas where bears had been extirpated early in this century. This project continued for 11 years with little public imput, during which time an estimated 254 bears were released. We estimate there are now >2,500 bears in the Interior Highlands of Arkansas, Missouri, and Oklahoma, making it one of the most successful translocations of a Carnivora. Factors that contributed to the success include use of wild-captured animals, elimination of major factors associated with extirpation, release into prime habitats within the former range, multiple release sites, release of 20–40 animals/year for eight years, and release of mostly males prior to release of mostly females. Studies on two allopatric populations demonstrate that they are now diverging in some demographic characteristics, including litter size, cub survivorship, and adult sex-ratio. Translocation of black bears to the Interior Highlands is successful in terms of numbers of animals, but it will not be truly successful until people accept black bears as part of the regional fauna. To that end, those associated with management and research of bears in Arkansas are now focussing on public education and control of nuisance bears.

  10. Reflections on the Gordon Commission

    Science.gov (United States)

    Haertel, Edward

    2014-01-01

    Background:This brief reflection on the work of the Gordon Commission calls out significant themes and implications found in the various papers authored by the commissioners and other scholars, especially those included in this special issue of Teachers College Record. Purpose: The forward-looking vision of the Gordon Commission is contrasted with…

  11. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  12. Gear bearing drive

    Science.gov (United States)

    Weinberg, Brian (Inventor); Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor)

    2011-01-01

    A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.

  13. Load responsive hydrodynamic bearing

    Science.gov (United States)

    Kalsi, Manmohan S.; Somogyi, Dezso; Dietle, Lannie L.

    2002-01-01

    A load responsive hydrodynamic bearing is provided in the form of a thrust bearing or journal bearing for supporting, guiding and lubricating a relatively rotatable member to minimize wear thereof responsive to relative rotation under severe load. In the space between spaced relatively rotatable members and in the presence of a liquid or grease lubricant, one or more continuous ring shaped integral generally circular bearing bodies each define at least one dynamic surface and a plurality of support regions. Each of the support regions defines a static surface which is oriented in generally opposed relation with the dynamic surface for contact with one of the relatively rotatable members. A plurality of flexing regions are defined by the generally circular body of the bearing and are integral with and located between adjacent support regions. Each of the flexing regions has a first beam-like element being connected by an integral flexible hinge with one of the support regions and a second beam-like element having an integral flexible hinge connection with an adjacent support region. A least one local weakening geometry of the flexing region is located intermediate the first and second beam-like elements. In response to application of load from one of the relatively rotatable elements to the bearing, the beam-like elements and the local weakening geometry become flexed, causing the dynamic surface to deform and establish a hydrodynamic geometry for wedging lubricant into the dynamic interface.

  14. A circumpolar monitoring framework for polar bears

    Science.gov (United States)

    Vongraven, Dag; Aars, Jon; Amstrup, Steven C.; Atkinson, Stephen N.; Belikov, Stanislav; Born, Erik W.; DeBruyn, T.D.; Derocher, Andrew E.; Durner, George M.; Gill, Michael J.; Lunn, Nicholas J.; Obbard, Martyn E.; Omelak, Jack; Ovsyanikov, Nikita; Peacock, Elizabeth; Richardson, E.E.; Sahanatien, Vicki; Stirling, Ian; Wiig, Øystein

    2012-01-01

    Polar bears (Ursus maritimus) occupy remote regions that are characterized by harsh weather and limited access. Polar bear populations can only persist where temporal and spatial availability of sea ice provides adequate access to their marine mammal prey. Observed declines in sea ice availability will continue as long as greenhouse gas concentrations rise. At the same time, human intrusion and pollution levels in the Arctic are expected to increase. A circumpolar understanding of the cumulative impacts of current and future stressors is lacking, long-term trends are known from only a few subpopulations, and there is no globally coordinated effort to monitor effects of stressors. Here, we describe a framework for an integrated circumpolar monitoring plan to detect ongoing patterns, predict future trends, and identify the most vulnerable polar bear subpopulations. We recommend strategies for monitoring subpopulation abundance and trends, reproduction, survival, ecosystem change, human-caused mortality, human–bear conflict, prey availability, health, stature, distribution, behavioral change, and the effects that monitoring itself may have on polar bears. We assign monitoring intensity for each subpopulation through adaptive assessment of the quality of existing baseline data and research accessibility. A global perspective is achieved by recommending high intensity monitoring for at least one subpopulation in each of four major polar bear ecoregions. Collection of data on harvest, where it occurs, and remote sensing of habitat, should occur with the same intensity for all subpopulations. We outline how local traditional knowledge may most effectively be combined with the best scientific methods to provide comparable and complementary lines of evidence. We also outline how previously collected intensive monitoring data may be sub-sampled to guide future sampling frequencies and develop indirect estimates or indices of subpopulation status. Adoption of this framework

  15. Polar bears in a warming climate.

    Science.gov (United States)

    Derocher, Andrew E; Lunn, Nicholas J; Stirling, Ian

    2004-04-01

    Polar bears (Ursus maritimus) live throughout the ice-covered waters of the circumpolar Arctic, particularly in near shore annual ice over the continental shelf where biological productivity is highest. However, to a large degree under scenarios predicted by climate change models, these preferred sea ice habitats will be substantially altered. Spatial and temporal sea ice changes will lead to shifts in trophic interactions involving polar bears through reduced availability and abundance of their main prey: seals. In the short term, climatic warming may improve bear and seal habitats in higher latitudes over continental shelves if currently thick multiyear ice is replaced by annual ice with more leads, making it more suitable for seals. A cascade of impacts beginning with reduced sea ice will be manifested in reduced adipose stores leading to lowered reproductive rates because females will have less fat to invest in cubs during the winter fast. Non-pregnant bears may have to fast on land or offshore on the remaining multiyear ice through progressively longer periods of open water while they await freeze-up and a return to hunting seals. As sea ice thins, and becomes more fractured and labile, it is likely to move more in response to winds and currents so that polar bears will need to walk or swim more and thus use greater amounts of energy to maintain contact with the remaining preferred habitats. The effects of climate change are likely to show large geographic, temporal and even individual differences and be highly variable, making it difficult to develop adequate monitoring and research programs. All ursids show behavioural plasticity but given the rapid pace of ecological change in the Arctic, the long generation time, and the highly specialised nature of polar bears, it is unlikely that polar bears will survive as a species if the sea ice disappears completely as has been predicted by some.

  16. Commission 31: Time

    Science.gov (United States)

    Matsakis, Demetrios; Defraigne, Pascale; Hosokawa, M.; Leschiutta, S.; Petit, G.; Zhai, Z.-C.

    2007-03-01

    The most intensely discussed and controversial issue in time keeping has been the proposal before the International Telecommunications Union (ITU) to redefine Coordinated Universal Time (UTC) so as to replace leap seconds by leap hours. Should this proposal be adopted, the practice of inserting leap seconds would cease after a specific date. Should the Earth's rotation continue to de-accelerate at its historical rate, the next discontinuity in UTC would be an hour inserted several centuries from now. Advocates of this proposal cite the need to synchronize satellite and other systems, such as GPS, Galileo, and GLONASS, which did not exist and were not envisioned when the current system was adopted. They note that leap second insertions can be and have been incorrectly implemented or accounted for. Such errors have to date had localized impact, but they could cause serious mishaps involving loss of life. For example, some GPS receivers have been known to fail simply because there was no leap second after a long enough interval, other GPS receivers failed because the leap second information was broadcast more than three months in advance, and some commercial software used for internet time-transfer Network Time Protocol (NTP) could either discard all data received after a leap second or interpret it as a frequency change. The ambiguity associated with the extra second could also disrupt financial accounting and certain forms of encryption. Those opposed to the proposal question the need for a change, and also point out the costs of adjusting to the proposed change and its inconvenience to amateur astronomers and others who rely upon astronomical calculations published in advance. Reports have been circulated that the cost of checking and correcting software to accommodate the new definition of UTC would be many millions of dollars for some systems. In October 2005 American Astronomical Society asked the ITU for a year's time to study the issue. This commission has

  17. Climate Drives Polar Bear Origins

    Science.gov (United States)

    In their provocative analysis of northern bears (“Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage,” Reports, 20 April, p. 344), F. Hailer et al. use independent nuclear loci to show that polar bears originated during the middle Pleistocene, rather than during t...

  18. The impact of roads on the demography of grizzly bears in Alberta.

    Science.gov (United States)

    Boulanger, John; Stenhouse, Gordon B

    2014-01-01

    One of the principal factors that have reduced grizzly bear populations has been the creation of human access into grizzly bear habitat by roads built for resource extraction. Past studies have documented mortality and distributional changes of bears relative to roads but none have attempted to estimate the direct demographic impact of roads in terms of both survival rates, reproductive rates, and the interaction of reproductive state of female bears with survival rate. We applied a combination of survival and reproductive models to estimate demographic parameters for threatened grizzly bear populations in Alberta. Instead of attempting to estimate mean trend we explored factors which caused biological and spatial variation in population trend. We found that sex and age class survival was related to road density with subadult bears being most vulnerable to road-based mortality. A multi-state reproduction model found that females accompanied by cubs of the year and/or yearling cubs had lower survival rates compared to females with two year olds or no cubs. A demographic model found strong spatial gradients in population trend based upon road density. Threshold road densities needed to ensure population stability were estimated to further refine targets for population recovery of grizzly bears in Alberta. Models that considered lowered survival of females with dependant offspring resulted in lower road density thresholds to ensure stable bear populations. Our results demonstrate likely spatial variation in population trend and provide an example how demographic analysis can be used to refine and direct conservation measures for threatened species.

  19. Tribology of alternative bearings.

    Science.gov (United States)

    Fisher, John; Jin, Zhongmin; Tipper, Joanne; Stone, Martin; Ingham, Eileen

    2006-12-01

    The tribological performance and biological activity of the wear debris produced has been compared for highly cross-linked polyethylene, ceramic-on-ceramic, metal-on-metal, and modified metal bearings in a series of in vitro studies from a single laboratory. The functional lifetime demand of young and active patients is 10-fold greater than the estimated functional lifetime of traditional polyethylene. There is considerable interest in using larger diameter heads in these high demand patients. Highly cross-linked polyethylene show a four-fold reduction in functional biological activity. Ceramic-on-ceramic bearings have the lowest wear rates and least reactive wear debris. The functional biological activity is 20-fold lower than with highly cross-linked polyethylene. Hence, ceramic-on-ceramic bearings address the tribological lifetime demand of highly active patients. Metal-on-metal bearings have substantially lower wear rates than highly cross-linked polyethylene and wear decreases with head diameter. Bedding in wear is also lower with reduced radial clearance. Differential hardness ceramic-on-metal bearings and the application of ceramic-like coatings reduce metal wear and ion levels.

  20. 11 CFR 9002.3 - Commission.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Commission. 9002.3 Section 9002.3 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: GENERAL ELECTION FINANCING DEFINITIONS § 9002.3 Commission. Commission means the Federal Election Commission, 999 E Street, NW., Washington, DC 20463...

  1. 11 CFR 9032.3 - Commission.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Commission. 9032.3 Section 9032.3 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: PRESIDENTIAL PRIMARY MATCHING FUND DEFINITIONS § 9032.3 Commission. Commission means the Federal Election Commission, 999 E Street NW., Washington, DC 20463...

  2. Radial Halbach Magnetic Bearings

    Science.gov (United States)

    Eichenberg, Dennis J.; Gallo, Christopher A.; Thompson, William K.

    2009-01-01

    Radial Halbach magnetic bearings have been investigated as part of an effort to develop increasingly reliable noncontact bearings for future high-speed rotary machines that may be used in such applications as aircraft, industrial, and land-vehicle power systems and in some medical and scientific instrumentation systems. Radial Halbach magnetic bearings are based on the same principle as that of axial Halbach magnetic bearings, differing in geometry as the names of these two types of bearings suggest. Both radial and axial Halbach magnetic bearings are passive in the sense that unlike most other magnetic bearings that have been developed in recent years, they effect stable magnetic levitation without need for complex active control. Axial Halbach magnetic bearings were described in Axial Halbach Magnetic Bearings (LEW-18066-1), NASA Tech Briefs, Vol. 32, No. 7 (July 2008), page 85. In the remainder of this article, the description of the principle of operation from the cited prior article is recapitulated and updated to incorporate the present radial geometry. In simplest terms, the basic principle of levitation in an axial or radial Halbach magnetic bearing is that of the repulsive electromagnetic force between (1) a moving permanent magnet and (2) an electric current induced in a stationary electrical conductor by the motion of the magnetic field. An axial or radial Halbach bearing includes multiple permanent magnets arranged in a Halbach array ("Halbach array" is defined below) in a rotor and multiple conductors in the form of wire coils in a stator, all arranged so the rotary motion produces an axial or radial repulsion that is sufficient to levitate the rotor. A basic Halbach array (see Figure 1) consists of a row of permanent magnets, each oriented so that its magnetic field is at a right angle to that of the adjacent magnet, and the right-angle turns are sequenced so as to maximize the magnitude of the magnetic flux density on one side of the row while

  3. Partial tooth gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2010-01-01

    A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

  4. 77 FR 28420 - Commission Meeting

    Science.gov (United States)

    2012-05-14

    ...The Susquehanna River Basin Commission will hold its regular business meeting on June 7, 2012, in Binghamton, New York. Details concerning the matters to be addressed at the business meeting are contained in the Supplementary Information section of this notice.

  5. NSF commission holds first meeting

    Science.gov (United States)

    Jones, Richard M.

    There has been considerable discussion in Washington science policy circles over the past few weeks about the newly established National Science Board Commission on the Future of the National Science Foundation. The commission, chaired by William Danforth, chancellor of Washington University, and Robert Galvin, former chief executive officer of Motorola, held its first meeting on September 17. Unfortunately, this meeting offered few indications of what changes might result from this exercise.

  6. Wisconsin SRF Electron Gun Commissioning

    Energy Technology Data Exchange (ETDEWEB)

    Bisognano, Joseph J. [University of Wisconsin-Madison; Bissen, M. [University of Wisconsin-Madison; Bosch, R. [University of Wisconsin-Madison; Efremov, M. [University of Wisconsin-Madison; Eisert, D. [University of Wisconsin-Madison; Fisher, M. [University of Wisconsin-Madison; Green, M. [University of Wisconsin-Madison; Jacobs, K. [University of Wisconsin-Madison; Keil, R. [University of Wisconsin-Madison; Kleman, K. [University of Wisconsin-Madison; Rogers, G. [University of Wisconsin-Madison; Severson, M. [University of Wisconsin-Madison; Yavuz, D. D. [University of Wisconsin-Madison; Legg, Robert A. [JLAB; Bachimanchi, Ramakrishna [JLAB; Hovater, J. Curtis [JLAB; Plawski, Tomasz [JLAB; Powers, Thomas J. [JLAB

    2013-12-01

    The University of Wisconsin has completed fabrication and commissioning of a low frequency (199.6 MHz) superconducting electron gun based on a quarter wave resonator (QWR) cavity. Its concept was optimized to be the source for a CW free electron laser facility. The gun design includes active tuning and a high temperature superconducting solenoid. We will report on the status of the Wisconsin SRF electron gun program, including commissioning experience and first beam measurements.

  7. Modular gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2009-01-01

    A gearing system using modular gear bearing components. Each component is composed of a core, one or more modules attached to the core and two or more fastening modules rigidly attaching the modules to the core. The modules, which are attached to the core, may consist of gears, rollers or gear bearing components. The core orientation affects the orientation of the modules attached to the core. This is achieved via the keying arrangement of the core and the component modules that attach to the core. Such an arrangement will also facilitate the phase tuning of gear modules with respect to the core and other gear modules attached to the core.

  8. Hybrid superconductor magnet bearings

    Science.gov (United States)

    Chu, Wei-Kan

    1995-01-01

    Hybrid superconductor magnet bearings (HSMB's) utilize high temperature superconductors (HTS's) together with permanent magnets to form a frictionless interface between relatively rotating parts. They are low mass, stable, and do not incur expenditure of energy during normal operation. There is no direct physical contact between rotor and stator, and hence there is no wear and tear. However, just as any other applications of HTS's, it requires a very cold temperature to function. Whereas this might be perceived as a disadvantage on earth, it is of no great concern in space or on the moon. To astronomers, the moon is an excellent site for an observatory, but the cold and dusty vacuum environment on the moon precludes the use of mechanical bearings on the telescope mounts. Furthermore, drive mechanisms with very fine steps, and hence bearings with extremely low friction are needed to track a star from the moon, because the moon rotates very slowly. All aspects considered, the HSMB is about the only candidate that fits in naturally. Here, we present a design for one such bearing, capable of supporting a telescope that weighs about 3 lbs on Earth.

  9. Commission Conditions d'emploi

    CERN Multimedia

    Staff Association

    2017-01-01

    Au CERN, nous avons la formidable possibilité d’imaginer nos CONDITIONS D’EMPLOIS. Rendez-vous compte ! Nous avons le pouvoir de proposer des idées et de les défendre pour avoir des conditions d’emplois qui soient les plus attractives possibles pour le personnel en place et à venir. ---------------- L’Association du personnel du CERN, tout le monde connait ou en a entendu parler. Ce qui est moins connu, ce sont les diverses commissions internes qui traitent des sujets propres à défendre les intérêts du personnel. Les publications dans notre journal, l’Echo, sont un des moyens à notre disposition pour vous faire découvrir chacune des commissions internes de l’Association du personnel (voir Echo n°242 sur la commission juridique, et Echo n°255 sur la commission des cas particuliers). Commission Conditions d&...

  10. 78 FR 56264 - Big Bear Mining Corp., Four Rivers BioEnergy, Inc., Mainland Resources, Inc., QI Systems Inc...

    Science.gov (United States)

    2013-09-12

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION Big Bear Mining Corp., Four Rivers BioEnergy, Inc., Mainland Resources, Inc., QI Systems Inc... information concerning the securities of Big Bear Mining Corp. because it has not filed any periodic reports...

  11. 77 FR 66975 - Black Bear SO, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Science.gov (United States)

    2012-11-08

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Black Bear SO, LLC; Supplemental Notice That Initial Market-Based Rate...-referenced proceeding of Black Bear SO, LLC's application for market-based rate authority, with an...

  12. 78 FR 50410 - Black Bear Development Holdings, LLC; Supplemental Notice that Initial Market-Based Rate Filing...

    Science.gov (United States)

    2013-08-19

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Black Bear Development Holdings, LLC; Supplemental Notice that Initial... notice in the above-referenced proceeding of Black Bear Development Holdings, LLC's application for...

  13. 77 FR 47624 - Tall Bear Group, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Science.gov (United States)

    2012-08-09

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Tall Bear Group, LLC; Supplemental Notice That Initial Market- Based Rate...-referenced proceeding, of Tall Bear Group, LLC's application for market-based rate authority, with an...

  14. 78 FR 2984 - Silver Bear Power, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Science.gov (United States)

    2013-01-15

    ... Energy Regulatory Commission Silver Bear Power, LLC; Supplemental Notice That Initial Market- Based Rate...-referenced proceeding, of Silver Bear Power, LLC's application for market-based rate authority, with an... . To facilitate electronic service, persons with Internet access who will eFile a document and/or be...

  15. Commission 41: History of Astronomy

    Science.gov (United States)

    Gurshtein, Alexander A.; Nha, Il-Seong; Ruggles, Clive L. N.; DeVorkin, David H.; Dick, Wolfgang R.; Kochhar, Rajesh; Nakamura, Tsuko; Pigatto, Luisa; Stephenson, F. Richard; Warner, Brian

    2007-12-01

    On Tuesday 22 August 2006 approximately 40 people attended the Commission 41 History of Astronomy Business Meeting at the IAU XXVI General Assembly in Prague. Commission president Alex Gurshtein opened the meeting, welcoming the commission members and calling for a moment of silence for those members who passed away in the last triennium. David DeVorkin was appointed recording secretary for the meeting, with Steven Dick as the scruitineer of the ballot. A moment of silence was then observed in the memory of members departed over the last triennium, including: Jerzy Dobrzycki (Poland), Robert Duncan (Australia), Mohammad Edalati (Iran), Philip Morrison (USA), John Perdix (Australia), Neil Porter (Ireland), Gibson Reaves (USA), Brian Robinson (Australia), and Raymond E. White (USA).

  16. Commissioning of the ATLAS Experiment

    CERN Document Server

    AUTHOR|(CDS)2069446

    2008-01-01

    The status of the commissioning of the ATLAS experiment as of May 2008 is presented. The subdetector integration in recent milestone weeks is described, especially the cosmic commissioning in milestone week M6, focusing on simultaneous running and combined track analysis of the muon detector and inner detector. The liquid argon and tile calorimeters have achieved near-full operation, and are integrated with the calorimeter trigger. The High-Level-Trigger infrastructure is installed and algorithms tested in technical runs. Problems with the inner detector cooling compressors are being fixed.

  17. Government Risk-Bearing

    CERN Document Server

    1993-01-01

    The u.s. government bulks large in the nation's financial markets. The huge volume of government-issued and -sponsored debt affects the pricing and volume ofprivate debt and, consequently, resource allocation between competing alternatives. What is often not fully appreciated is the substantial influence the federal government wields overresource allocation through its provisionofcreditandrisk-bearing services to the private economy. Because peopleand firms generally seekto avoid risk, atsomeprice they are willing to pay another party to assume the risk they would otherwise face. Insurance companies are a class of private-sector firms one commonly thinks of as providing these services. As the federal government has expanded its presence in the U.S. economy during this century, it has increasingly developed programs aimed at bearing risks that the private sector either would not take on at any price, or would take on but atapricethoughtto besogreatthatmostpotentialbeneficiarieswouldnotpurchase the coverage. To...

  18. Magnetic translator bearings

    Science.gov (United States)

    Hockney, Richard L. (Inventor); Downer, James R. (Inventor); Eisenhaure, David B. (Inventor); Hawkey, Timothy J. (Inventor); Johnson, Bruce G. (Inventor)

    1990-01-01

    A magnetic bearing system for enabling translational motion includes a carriage and a shaft for movably supporting the carriage; a first magnetic bearing fixed to one of the carriage and shaft and slidably received in a first channel of the other of the carriage and shaft. The first channel is generally U shaped with two side walls and a back wall. The magnetic bearing includes a pair of spaced magnetic pole pieces, each pole piece having a pair of electromagnetic coils mounted on poles on opposite ends of the pole piece proximate the side walls, and a third electromagnetic coil mounted on a pole of the pole piece proximate the backwall; a motion sensor for sensing translational motion along two axes and rotationally about three axes of the carriage and shaft relative to each other; and a correction circuit responsive to the sensor for generating a correction signal to drive the coils to compensate for any misalignment sensed between the carriage and the shaft.

  19. 76 FR 6774 - Equity and Excellence Commission

    Science.gov (United States)

    2011-02-08

    ... Equity and Excellence Commission AGENCY: Office for Civil Rights, Department of Education. ACTION: Notice... meeting of the Equity and Excellence Commission (Commission). The notice also describes the functions of... Chen, Designated Federal Official, Equity and Excellence Commission, U.S. Department of Education, 400...

  20. 75 FR 48661 - Equity and Excellence Commission

    Science.gov (United States)

    2010-08-11

    ... Equity and Excellence Commission AGENCY: U.S. Department of Education, Office for Civil Rights. ACTION: Notice of Establishment of the Equity and Excellence Commission. SUMMARY: The U.S. Secretary of Education (Secretary) announces the establishment of the Equity and Excellence Commission (Equity Commission or...

  1. 75 FR 48662 - Equity and Excellence Commission

    Science.gov (United States)

    2010-08-11

    ... Equity and Excellence Commission AGENCY: Office for Civil Rights, U.S. Department of Education. ACTION: Request for Nominations to Serve on the Equity and Excellence Commission. SUMMARY: The Secretary of... Equity and Excellence Commission. SUPPLEMENTARY INFORMATION: The Equity and Excellence Commission (Equity...

  2. 77 FR 484 - Equity and Excellence Commission

    Science.gov (United States)

    2012-01-05

    ... Equity and Excellence Commission AGENCY: Office for Civil Rights, U.S. Department of Education. ACTION...-coming meeting of the Equity and Excellence Commission (Commission). The notice also describes the..., Equity and Excellence Commission, U.S. Department of Education, 400 Maryland Avenue SW, Washington, DC...

  3. 17 CFR 200.10 - The Commission.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false The Commission. 200.10 Section 200.10 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION ORGANIZATION; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Organization and Program Management General Organization § 200.10 The Commission. The Commission is composed...

  4. 32 CFR 17.3 - Commission personnel.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Commission personnel. 17.3 Section 17.3 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE MILITARY COMMISSIONS ADMINISTRATIVE PROCEDURES § 17.3 Commission personnel. (a) Appointment and removal of Commission members. (1) In accordance with 32 CFR part 9, the Appointing...

  5. 29 CFR 2704.308 - Commission review.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Commission review. 2704.308 Section 2704.308 Labor Regulations Relating to Labor (Continued) FEDERAL MINE SAFETY AND HEALTH REVIEW COMMISSION IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT IN COMMISSION PROCEEDINGS Procedures for Considering Applications § 2704.308 Commission review. (a) Either the...

  6. 32 CFR 9.4 - Commission personnel.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Commission personnel. 9.4 Section 9.4 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE MILITARY COMMISSIONS PROCEDURES FOR TRIALS BY MILITARY COMMISSIONS OF CERTAIN NON-UNITED STATES CITIZENS IN THE WAR AGAINST TERRORISM § 9.4 Commission personnel. (a) Members—(1)...

  7. Ancient hybridization and an Irish origin for the modern polar bear matriline

    DEFF Research Database (Denmark)

    Edwards, Ceiridwen J.; Suchard, Marc A.; Lemey, Philippe

    2011-01-01

    Polar bears (Ursus maritimus) are among those species most susceptible to the rapidly changing arctic climate, and their survival is of global concern. Despite this, little is known about polar bear species history. Future conservation strategies would significantly benefit from an understanding...... of basic evolutionary information, such as the timing and conditions of their initial divergence from brown bears (U. arctos) or their response to previous environmental change....

  8. Population dynamics of Yellowstone grizzly bears

    Science.gov (United States)

    Knight, Richard R.; Eberhardt, L.L.

    1985-01-01

    Data on the population of grizzly bears in the environs of Yellowstone National Park suggest that the population has not recovered from the reductions following closure of garbage dumps in 1970 and 1971, and may continue to decline. A computer simulation model indicates that the risk of extirpation over the next 30 yr is small, if the present population parameters continue to prevail. A review and further analysis of the available data brings out the importance of enhancing adult female survival if the population is to recover, and assesses various research needs. In particular, a reliable index of population trend is needed to augment available data on the population.

  9. J-PARC Commissioning Results

    CERN Document Server

    Hasegawa, Kazuo

    2005-01-01

    The J-PARC (Japan Proton Accelerator Research Complex)comprises a 400-MeV linac, a 3-GeV rapid-cycling synchrotron (RCS), a 50-GeV main ring synchrotron (MR) and experimental facilities. A peak current of 30 mA was accelerated up to 20 MeV of the DTL beam commissioning at the KEK site. The buildings and conventional facilities will be completed in succession in the Japanese Fiscal Year 2005, when the installation of the accelerator components will be actually started at Tokai site. The beam commissioning of the 181 MeV linac will be started in September, 2006, followed by the RCS and MR beam commissioning. To achieve the high beam power with low beam loss, the J-PARC accelerators are based on many newly developed technologies; pi-mode stabilizing loops in the RFQ, RF choppers in the medium energy beam transport, magnetic alloy loaded RF cavities in the synchrotrons, etc. The recent results of the developments of these new technologies, the present construction status and the commissioning schedule will be pre...

  10. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS

    CERN Multimedia

    D. Acosta

    The commissioning effort is presently addressing two main areas: the commissioning of the hardware components at the pit and the coordination of the activities of the newly constituted Detector Performance groups (DPGs). At point 5, a plan regarding the service cavern and the commissioning of the connections of the off-detector electronics (for the data collection line and trigger primitive generation) to the central DAQ and the central Trigger has been defined. This activity was started early February and will continue until May. It began with Tracker electronics followed so far by HCAL and CSC. The goal is to have by May every detector commission, as much as possible, their data transfer paths from FED to Central DAQ as well as their trigger setups between TPGs and Global Level 1 trigger. The next focus is on connections of front-ends to the service cavern. This depends strongly on the installations of services. Presently the only detector which has its link fibers connected to the off-detector electr...

  11. Building the Next Bioethics Commission.

    Science.gov (United States)

    Capron, Alexander M

    2017-05-01

    At every moment, somewhere in the world, a group of men and women are sitting around a table deliberating about an ethical issue posed by medicine and research, whether as a research ethics committee; a hospital or clinical ethics committee; a stem-cell review committee; a gene transfer research committee; a biobank ethics committee; an ethics advisory committee for a medical or nursing association or nongovernmental organization; a state, provincial, national, or intergovernmental bioethics committee; or an ad hoc panel examining a particular development or case. However, the last national committee in the United States, the Presidential Commission for the Study of Bioethical Issues, held its final meeting at the end of August 2016 and closed its doors. Should we regret its departure? I believe that the United States would benefit from having another national bioethics advisory body, but I do not think that the commission should simply have continued under a new president in the same form. Instead, looking at the experience of that commission and its six predecessors-who they were, how they worked, the functions they served, and the problems they experienced-we can derive some useful ideas for anyone planning to build the next commission. © 2017 The Hastings Center.

  12. Anti-backlash gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2009-01-01

    A gear bearing having a first gear and a second gear, each having a plurality of teeth. Each gear operates on two non-parallel surfaces of the opposing gear teeth to perform both gear and bearing functions simultaneously. The gears are moving at substantially the same speed at their contact points. The gears may be roller gear bearings or phase-shifted gear bearings, and may be arranged in a planet/sun system or used as a transmission. One preferred embodiment discloses and describes an anti-backlash feature to counter ''dead zones'' in the gear bearing movement.

  13. Introgressive hybridization: brown bears as vectors for polar bear alleles.

    Science.gov (United States)

    Hailer, Frank

    2015-03-01

    The dynamics and consequences of introgression can inform about numerous evolutionary processes. Biologists have therefore long been interested in hybridization. One challenge, however, lies in the identification of nonadmixed genotypes that can serve as a baseline for accurate quantification of admixture. In this issue of Molecular Ecology, Cahill et al. (2015) analyse a genomic data set of 28 polar bears, eight brown bears and one American black bear. Polar bear alleles are found to be introgressed into brown bears not only near a previously identified admixture zone on the Alaskan Admiralty, Baranof and Chichagof (ABC) Islands, but also far into the North American mainland. Elegantly contrasting admixture levels at autosomal and X chromosomal markers, Cahill and colleagues infer that male-biased dispersal has spread these introgressed alleles away from the Late Pleistocene contact zone. Compared to a previous study on the ABC Island population in which an Alaskan brown bear served as a putatively admixture-free reference, Cahill et al. (2015) utilize a newly sequenced Swedish brown bear as admixture baseline. This approach reveals that brown bears have been impacted by introgression from polar bears to a larger extent (up to 8.8% of their genome), than previously known, including the bear that had previously served as admixture baseline. No evidence for introgression of brown bear into polar bear is found, which the authors argue could be a consequence of selection. Besides adding new exciting pieces to the puzzle of polar/brown bear evolutionary history, the study by Cahill and colleagues highlights that wildlife genomics is moving from analysing single genomes towards a landscape genomics approach. © 2015 John Wiley & Sons Ltd.

  14. Aerospace applications of magnetic bearings

    Science.gov (United States)

    Downer, James; Goldie, James; Gondhalekar, Vijay; Hockney, Richard

    1994-05-01

    Magnetic bearings have traditionally been considered for use in aerospace applications only where performance advantages have been the primary, if not only, consideration. Conventional wisdom has been that magnetic bearings have certain performance advantages which must be traded off against increased weight, volume, electric power consumption, and system complexity. These perceptions have hampered the use of magnetic bearings in many aerospace applications because weight, volume, and power are almost always primary considerations. This paper will review progress on several active aerospace magnetic bearings programs at SatCon Technology Corporation. The magnetic bearing programs at SatCon cover a broad spectrum of applications including: a magnetically-suspended spacecraft integrated power and attitude control system (IPACS), a magnetically-suspended momentum wheel, magnetic bearings for the gas generator rotor of a turboshaft engine, a vibration-attenuating magnetic bearing system for an airborne telescope, and magnetic bearings for the compressor of a space-rated heat pump system. The emphasis of these programs is to develop magnetic bearing technologies to the point where magnetic bearings can be truly useful, reliable, and well tested components for the aerospace community.

  15. Population commission discusses international migration.

    Science.gov (United States)

    1997-01-01

    At the 30th session of the Commission on Population and Development during February 24-28, 1997, international migration was the main topic, with special linkages between migration and development and on gender issues and the family. New and emerging issues were also considered. Members stressed the need for more reliable data on migration, the direction of migrants flows, and the characteristics of migrants. The Commission requested a task force on basic social services to hold a technical symposium of experts on international migration in 1998. Its chair, Dr. Nafis Sadik, said that migration issues should based on the reality of choice not on coercive measures or quotas. Almost half of the migrants globally are women. The Commission was given a new impetus by the International Conference on Population and Development held at Cairo in 1994. Migration pressures intensified in the second half of the 1980s and in the early 1990s, creating areas of concern: the negative impact of short-term migration on working conditions in host countries; migration pressures emanating from climatic change; the protection of migrant women and their children; the right of receiving countries to regulate access to their territory; the adverse consequences of forced migration; the situation of persons whose asylum claims have been rejected; the trafficking in women and children, prostitution and coercive adoption; and the sudden and massive arrival of refugees in need of international protection. The 1998 session of the Commission will feature the theme of health and mortality, with special emphasis on the linkages between health and development and on gender and age.

  16. Survival Analysis

    CERN Document Server

    Miller, Rupert G

    2011-01-01

    A concise summary of the statistical methods used in the analysis of survival data with censoring. Emphasizes recently developed nonparametric techniques. Outlines methods in detail and illustrates them with actual data. Discusses the theory behind each method. Includes numerous worked problems and numerical exercises.

  17. Modelling survival

    DEFF Research Database (Denmark)

    Ashauer, Roman; Albert, Carlo; Augustine, Starrlight

    2016-01-01

    well GUTS, calibrated with short-term survival data of Gammarus pulex exposed to four pesticides, can forecast effects of longer-term pulsed exposures. Thirdly, we tested the ability of GUTS to estimate 14-day median effect concentrations of malathion for a range of species and use these estimates...

  18. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS

    CERN Multimedia

    T. Camporesi

    The major progress made during the last months has been in the consolidation of services for the +endcaps and three barrel wheels (YB+2, YB+1 and YB0): all subdetectors have now final power connections (including Detector Safety protection), the gas systems have been commissioned for all gas detectors (the recirculation is not yet activated for the RPC though) and detector cooling has also been commissioned. Their integration with final services is the necessary condition for being able to operate larger fractions the detector. Recent weeks have seen full HCAL, more than 50% of EB and full wheels of DTs and CSC being operated using final services. This has not yet translated into major progress of global integration due to major interruptions of central services, which have not allowed the necessary debugging and commissioning time to all the subdetec¬tors and central activities like DAQ and trigger. Moreover the running in of the final central services has introduced instabilities related to the co...

  19. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS

    CERN Multimedia

    T. Camporesi

    P5 Commissioning activities The commissioning effort at the pit has made major progress since the last CMS week concerning the installation and operation of the off-detector electronics in USC. The progress has been much slower in the experi¬mental cavern due to the delay in the deployment of the infrastructure which should eventually allow safe powering-up of the front ends. Nevertheless, temporary power connections have allowed operation of slices of subdetectors at any given time. HF, HE, ECAL, DTs, RPCs and CSCs have carried out local commissioning tests with these temporary services. The status of hardware deployment in USC and on the towers/balconies is represented in the detailed table below.   Table 1: Status of installation of off-detector electronics. FEDs are detector dependent hardware modules which perform the first ‘colla¬tion’ of front-end data and send it to Central-data for event building. Tracker, ECAL, HCAL have their front end electronics mo...

  20. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS

    CERN Multimedia

    D. Acosta

    The global commissioning campaign begins this year with a series of weekly two-day global runs of limited participation until mid-March. The aim of these runs varies week-to-week, but includes the commissioning the calorimeter triggers, the muon track-finder triggers in the DT/CSC overlap, the PLL locking ranges, and generally accumulating data either for HCAL noise characterization or detector studies with cosmic muons. In mid-March a full Global Run is scheduled with all components participating, followed in April by a Cosmic Run with the aim of collecting statistics over a couple weeks with the installed Tracker and other subsystems. The ultimate milestone is the Cosmic Run At Four Tesla (CRAFT), with a completed CMS closed and the solenoid energized for data-taking during June. The Detector Performance Groups start the year with the focus to prepare for LHC collisions, and the associated challenges (CSA08) and global commissioning exercises (CRAFT) along the way. New this year is the addition of the Tri...

  1. Stochasticity in natural forage production affects use of urban areas by black bears: implications to management of human-bear conflicts.

    Science.gov (United States)

    Baruch-Mordo, Sharon; Wilson, Kenneth R; Lewis, David L; Broderick, John; Mao, Julie S; Breck, Stewart W

    2014-01-01

    The rapid expansion of global urban development is increasing opportunities for wildlife to forage and become dependent on anthropogenic resources. Wildlife using urban areas are often perceived dichotomously as urban or not, with some individuals removed in the belief that dependency on anthropogenic resources is irreversible and can lead to increased human-wildlife conflict. For American black bears (Ursus americanus), little is known about the degree of bear urbanization and its ecological mechanisms to guide the management of human-bear conflicts. Using 6 years of GPS location and activity data from bears in Aspen, Colorado, USA, we evaluated the degree of bear urbanization and the factors that best explained its variations. We estimated space use, activity patterns, survival, and reproduction and modeled their relationship with ecological covariates related to bear characteristics and natural food availability. Space use and activity patterns were dependent on natural food availability (good or poor food years), where bears used higher human density areas and became more nocturnal in poor food years. Patterns were reversible, i.e., individuals using urban areas in poor food years used wildland areas in subsequent good food years. While reproductive output was similar across years, survival was lower in poor food years when bears used urban areas to a greater extent. Our findings suggest that bear use of urban areas is reversible and fluctuates with the availability of natural food resources, and that removal of urban individuals in times of food failures has the potential to negatively affect bear populations. Given that under current predictions urbanization is expected to increase by 11% across American black bear range, and that natural food failure years are expected to increase in frequency with global climate change, alternative methods of reducing urban human-bear conflict are required if the goal is to prevent urban areas from becoming population sinks.

  2. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  3. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  4. Hydrostatic and hybrid bearing design

    CERN Document Server

    Rowe, W B

    1983-01-01

    Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering des

  5. National Capital Planning Commission Library contents

    Data.gov (United States)

    National Capital Planning Commission — The National Capital Planning Commission library catalog is a compilation of titles, authors, years of publication and topics of books, reports and NCPC publications.

  6. 9/11 Commission Recommendations: Implementation Status

    National Research Council Canada - National Science Library

    Grimmett, Richard F

    2006-01-01

    ... Commission s final report. The analysis was produced by a large team of CRS Specialists, analysts, and attorneys who are responsible for the wide variety of policy areas covered by the 9/11 Commission in its work...

  7. Bioethics commission to review gene patenting

    Energy Technology Data Exchange (ETDEWEB)

    Rothenburg, L.

    1995-12-01

    In October, in an unexpected development, U.S. President Bill Clinton created a national ethics advisory board, the National Bioethics Advisory Commission (NBAC, Washington, DC), to study both research ethics and the management and use of genetic information. Of particular interest to biotechnology companies and researchers is the fact that the commission`s brief encompasses issues about human gene patenting, a subject not contained in earlier proposals for the commission.

  8. Commission européenne

    OpenAIRE

    2010-01-01

    Le journaliste politique Derk-Jan EPPINK présente les coulisses de la Commission, où il a travaillé pendant plus de 7 ans. Rattaché au cabinet du commissaire Fritz Bolkestein en 1999/2004, puis à celui de Siim Kallas en 2004/07, il livre ici une galerie de portraits de ceux qui font l’Europe à Bruxelles, de Jacques De­lors à Pascal Lamy, en passant par Valéry Giscard d’Estaing. Un récit à la fois instructif et divertissant sur les dessous de l’UE. (sh)

  9. 17 CFR 201.57 - Commission review.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Commission review. 201.57... Regulations Pertaining to the Equal Access to Justice Act § 201.57 Commission review. In accordance with the... Division of the Commission may seek review of the initial decision on the fee application, or the...

  10. 39 CFR 3060.42 - Commission review.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Commission review. 3060.42 Section 3060.42 Postal... COMPETITIVE PRODUCTS ENTERPRISE § 3060.42 Commission review. (a) Interested persons shall be provided an... documentation. (b) The Commission will review the calculation of the assumed Federal income tax submitted...

  11. 77 FR 2711 - Equity and Excellence Commission

    Science.gov (United States)

    2012-01-19

    ... Equity and Excellence Commission AGENCY: Office for Civil Rights, Education. ACTION: Notice of open... Equity and Excellence Commission. This notice amends the January 5, 2012 notice by providing notice of a... Official, Equity and Excellence Commission, U.S. Department of Education, 400 Maryland Avenue SW...

  12. 77 FR 10004 - CFC-50 Commission

    Science.gov (United States)

    2012-02-21

    ... MANAGEMENT CFC-50 Commission AGENCY: Office of Personnel Management. ACTION: Establishment of advisory committee. SUMMARY: The CFC-50 Advisory Commission will hold its third and final meeting on March 2, 2012... Federal Campaign (CFC) to ensure its continued growth and success. The Commission is an advisory committee...

  13. 76 FR 53159 - CFC-50 Commission Meeting

    Science.gov (United States)

    2011-08-25

    ... MANAGEMENT CFC-50 Commission Meeting AGENCY: Office of Personnel Management. ACTION: Establishment of advisory committee. SUMMARY: The CFC-50 Advisory Commission will hold its initial meeting on September 13... Combined Federal Campaign (CFC) to ensure its continued growth and success. The Commission is an advisory...

  14. 75 FR 14628 - Notice of Commission Decision

    Science.gov (United States)

    2010-03-26

    ... Counsel, U.S. International Trade Commission, 500 E Street, SW., Washington, DC 20436, telephone (202) 708... Secretary, U.S. International Trade Commission, 500 E Street, SW., Washington, DC 20436, telephone (202) 205... obvious by IBM Process A in light of the other prior art asserted by respondents and the Commission...

  15. 75 FR 18469 - April 2010 Commission Meeting

    Science.gov (United States)

    2010-04-12

    ...; ] EXECUTIVE OFFICE OF THE PRESIDENT National Commission on Fiscal Responsibility and Reform April 2010...), the National Commission on Fiscal Responsibility and Reform announces the following meeting: Name: National Commission on Fiscal Responsibility and Reform April 2010 Meeting. Time and Date: Tuesday, April...

  16. 29 CFR 2204.309 - Commission review.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Commission review. 2204.309 Section 2204.309 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT IN PROCEEDINGS BEFORE THE OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION Procedures for Considering Applications §...

  17. Superconducting bearings for flywheel applications

    DEFF Research Database (Denmark)

    Abrahamsen, A.B.

    2001-01-01

    A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings...

  18. The impact of roads on the demography of grizzly bears in Alberta.

    Directory of Open Access Journals (Sweden)

    John Boulanger

    Full Text Available One of the principal factors that have reduced grizzly bear populations has been the creation of human access into grizzly bear habitat by roads built for resource extraction. Past studies have documented mortality and distributional changes of bears relative to roads but none have attempted to estimate the direct demographic impact of roads in terms of both survival rates, reproductive rates, and the interaction of reproductive state of female bears with survival rate. We applied a combination of survival and reproductive models to estimate demographic parameters for threatened grizzly bear populations in Alberta. Instead of attempting to estimate mean trend we explored factors which caused biological and spatial variation in population trend. We found that sex and age class survival was related to road density with subadult bears being most vulnerable to road-based mortality. A multi-state reproduction model found that females accompanied by cubs of the year and/or yearling cubs had lower survival rates compared to females with two year olds or no cubs. A demographic model found strong spatial gradients in population trend based upon road density. Threshold road densities needed to ensure population stability were estimated to further refine targets for population recovery of grizzly bears in Alberta. Models that considered lowered survival of females with dependant offspring resulted in lower road density thresholds to ensure stable bear populations. Our results demonstrate likely spatial variation in population trend and provide an example how demographic analysis can be used to refine and direct conservation measures for threatened species.

  19. 77 FR 41978 - Black Bear Hydro Partners, LLC, Maine; Notice of Availability of Environmental Assessment

    Science.gov (United States)

    2012-07-17

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Black Bear Hydro Partners, LLC, Maine; Notice of Availability of Environmental Assessment In accordance with the National Environmental Policy Act of 1969 and the Federal Energy...

  20. 78 FR 45068 - Commission's Rules of Practice and Procedure; Practice Before the Commission, Parties to...

    Science.gov (United States)

    2013-07-26

    ... Commission, Parties to Proceedings, and Rulemakings AGENCY: Federal Maritime Commission. ACTION: Final rule... regarding practice before the Commission, parties to proceedings, and rulemakings, to update, clarify, and reduce the burden on parties to proceedings before the Commission. DATES: Effective: July 29, 2013. FOR...

  1. 75 FR 11166 - Joint Meeting of the Nuclear Regulatory Commission and the Federal Energy Regulatory Commission...

    Science.gov (United States)

    2010-03-10

    ... From the Federal Register Online via the Government Publishing Office ] DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Joint Meeting of the Nuclear Regulatory Commission and the Federal Energy Regulatory Commission; Notice of Joint Meeting of the Nuclear Regulatory Commission and the...

  2. Molr - A delegation framework for accelerator commissioning

    CERN Document Server

    Valliappan, Nachiappan

    2017-01-01

    Accelerator commissioning is the process of preparing an accelerator for beam operations. A typical commissioning period at CERN involves running thousands of tests on many complex systems and machinery to ensure smooth beam operations and correct functioning of the machine protection systems. AccTesting is a software framework which helps orchestrate the commissioning of CERN’s accelerators and it’s equipment systems. This involves running and managing tests provided by various commissioning tools and analyzing their outcomes. Currently, AccTesting only supports a specific set of commissioning tools. In this project, we aim to widen the spectrum of commissioning tools supported by AccTesting by developing a generic and programmable integration framework called Molr, which would enable the integration of more commissioning tools with AccTesting. In this report, we summarize the work done during the summer student project and lay out a brief overview of the current status and next steps for Molr.

  3. Innovations’ Survival

    Directory of Open Access Journals (Sweden)

    Jakub Tabas

    2016-01-01

    Full Text Available Innovations currently represent a tool of maintaining the going concern of a business entity and its competitiveness. However, effects of innovations are not infinite and if an innovation should constantly preserve a life of business entity, it has to be a continual chain of innovations, i.e. continual process. Effective live of a single innovation is limited while the limitation is derived especially from industry. The paper provides the results of research on innovations effects in the financial performance of small and medium-sized enterprises in the Czech Republic. Objective of this paper is to determine the length and intensity of the effects of technical innovations in company’s financial performance. The economic effect of innovations has been measured at application of company’s gross production power while the Deviation Analysis has been applied for three years’ time series. Subsequently the Survival Analysis has been applied. The analyses are elaborated for three statistical samples of SMEs constructed in accordance to the industry. The results obtained show significant differences in innovations’ survival within these three samples of enterprises then. The results are quite specific for the industries, and are confronted and discussed with the results of authors’ former research on the issue.

  4. Surviving secondments.

    Science.gov (United States)

    Kedward, Alison; Jones, Eiri

    2008-11-01

    In the current climate of organisational and financial change in the NHS, new job opportunities along traditional pathways for senior staff are becoming fewer. Increasing competition for posts requires that senior staff acquire new professional expertise, and one of the best ways of doing so is to undertake secondments. The two authors of this case study have both held senior substantive positions in nursing management and clinical leadership: Eiri Jones at the former Bio Morgannwg NHS Trust and Alison Kedward at the former Swansea NHS Trust. These trusts have now merged to form Abertawe Bro Morgannwg University NHS Trust. After completing a national executive development programme for aspiring nurse directors run by the National Leadership and Innovation Agency for Healthcare (NLIAH), they both obtained secondments to interim nurse director posts. Ms Kedward was seconded to Pembrokeshire Local Health Board, a commissioning organisation, for nine months and Ms Jones was seconded to Ceredigion and Mid Wales NHS Trust, an integrated NHS service provider, for 14 months. This article provides a case study of the authors' experiences on secondment, and recommendations for nurse managers who are considering whether to undertake this form of career development.

  5. Report on Quality and Manufacturing of Bear Bile from Living Bear

    OpenAIRE

    川原, 一仁; 木谷, 千穂; 吉村, 千明; 田中, 俊弘; KAZUHITO, KAWAHARA; CHIHO, KITANI; CHIAKI, YOSHIMURA; TOSHIHIRO, TANAKA; 日野薬品株式会社; 岐阜薬科大学; Hino Pharmaceutical Co., Ltd.; Gifu Pharmaceutical University

    1995-01-01

    Bear bile has been obtained from bears after slaughtering the animals. Today, in China, bear bile is collected in bear farms without killing the animals. And it has confirmed that the third generation (kept) is artificially bred. The ingredients of bear bile collected from live bear in Heilongjian, Liaoning, Jiling, Sichuan, Shanxi, and Shanghai were compared with those of natural bear bile obtained by killing bear in India and Canada, by thin-layer chromatography. The main component was taur...

  6. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS

    CERN Multimedia

    T. Camporesi

    The central commissioning activities have concentrated mostly in the Service cavern. Since early February the central DAQ has been ready to accept connections from FEDs from the various partitions. This has triggered a campaign from all subdetectors to install their readout crates in USC55. Systematic tests of the connections between FEDs and Central DAQ have been scheduled and to date more than 70% of all FED connections have been successfully tested from almost all subdetectors. In March the Level 1 trigger team started deployment of their hardware followed by a campaign of testing the connections between Trigger primitive generators and the corresponding LV1 hardware (Regional Calorimeter Trigger and Global Muon Trigger). The functionality tests are continuing to date by pattern tests of increasing complexity. In April the central DAQ was ready to start FED system tests, which amounts to testing the data reading and trans¬fer-ability from the FEDs to the Filter Units (with or without an actual ...

  7. Commissioning and operation of DRAGON

    CERN Document Server

    Engel, S

    2003-01-01

    The new DRAGON (Detector of Recoils And Gammas Of Nuclear reactions) facility, located at the TRIUMF-ISAC radioactive beams laboratory in Vancouver, Canada, has initiated its experimental program. Recently DRAGON was used for initial studies of the sup 2 sup 1 Na(p,gamma) sup 2 sup 2 Mg reaction. This facility was designed to measure absolutely the rates of radiative proton and alpha capture reactions of astrophysical interest to a precision of +-20%, using inverse kinematics. To fully understand the optics and operational parameters of the facility along with the transmission particularly of the reaction recoils, systematic studies of various configurations are in progress using stable beams along with measurements of well-known resonance reactions. The status of these commissioning studies is presented.

  8. Orion: a commissioned user facility

    Science.gov (United States)

    Treadwell, P. A.; Allan, P.; Cann, N.; Danson, C.; Duffield, S.; Elsmere, S.; Edwards, R.; Egan, D.; Girling, M.; Gumbrell, E.; Harvey, E.; Hill, M.; Hillier, D.; Hoarty, D.; Hobbs, L.; Hopps, N.; Hussey, D.; Oades, K.; James, S.; Norman, M.; Palmer, J.; Parker, S.; Winter, D.; Bett, T.

    2013-05-01

    The Orion Laser Facility at AWE in the UK consists of ten nanosecond beamlines and two sub-picosecond beamlines. The nanosecond beamlines each nominally deliver 500 J at 351 nm in a 1 ns square temporal profile, but can also deliver a user-definable temporal profile with durations between 0.1 ns and 5 ns. The sub-picosecond beamlines each nominally deliver 500 J at 1053 nm in a 500 fs pulse, with a peak irradiance of greater than 1021 W/cm2. One of the sub-picosecond beamlines can also be frequency-converted to deliver 100 J at 527 nm in a 500 fs pulse, although this is at half the aperture of the 1053 nm beam. Commissioning of all twelve beamlines has been completed, including the 527 nm sub-picosecond option. An overview of the design of the Orion beamlines will be presented, along with a summary of the commissioning and subsequent performance data. The design of Orion was underwritten by running various computer simulations of the beamlines. Work is now underway to validate these simulations against real system data, with the aim of creating predictive models of beamline performance. These predictive models will enable the user's experimental requirements to be critically assessed ahead of time, and will ultimately be used to determine key system settings and parameters. The facility is now conducting high energy density physics experiments. A capability experiment has already been conducted that demonstrates that Orion can generate plasmas at several million Kelvin and several times solid density. From March 2013 15% of the facility operating time will be given over to external academic users in addition to collaborative experiments with AWE scientists.

  9. Ancient hybridization and an Irish origin for the modern polar bear matriline.

    Science.gov (United States)

    Edwards, Ceiridwen J; Suchard, Marc A; Lemey, Philippe; Welch, John J; Barnes, Ian; Fulton, Tara L; Barnett, Ross; O'Connell, Tamsin C; Coxon, Peter; Monaghan, Nigel; Valdiosera, Cristina E; Lorenzen, Eline D; Willerslev, Eske; Baryshnikov, Gennady F; Rambaut, Andrew; Thomas, Mark G; Bradley, Daniel G; Shapiro, Beth

    2011-08-09

    Polar bears (Ursus maritimus) are among those species most susceptible to the rapidly changing arctic climate, and their survival is of global concern. Despite this, little is known about polar bear species history. Future conservation strategies would significantly benefit from an understanding of basic evolutionary information, such as the timing and conditions of their initial divergence from brown bears (U. arctos) or their response to previous environmental change. We used a spatially explicit phylogeographic model to estimate the dynamics of 242 brown bear and polar bear matrilines sampled throughout the last 120,000 years and across their present and past geographic ranges. Our results show that the present distribution of these matrilines was shaped by a combination of regional stability and rapid, long-distance dispersal from ice-age refugia. In addition, hybridization between polar bears and brown bears may have occurred multiple times throughout the Late Pleistocene. The reconstructed matrilineal history of brown and polar bears has two striking features. First, it is punctuated by dramatic and discrete climate-driven dispersal events. Second, opportunistic mating between these two species as their ranges overlapped has left a strong genetic imprint. In particular, a likely genetic exchange with extinct Irish brown bears forms the origin of the modern polar bear matriline. This suggests that interspecific hybridization not only may be more common than previously considered but may be a mechanism by which species deal with marginal habitats during periods of environmental deterioration. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Can polar bears use terrestrial foods to offset lost ice-based hunting opportunities?

    Science.gov (United States)

    Rode, Karyn D.; Robbins, Charles T.; Nelson, Lynne; Amstrup, Steven C.

    2015-01-01

    Increased land use by polar bears (Ursus maritimus) due to climate-change-induced reduction of their sea-ice habitat illustrates the impact of climate change on species distributions and the difficulty of conserving a large, highly specialized carnivore in the face of this global threat. Some authors have suggested that terrestrial food consumption by polar bears will help them withstand sea-ice loss as they are forced to spend increasing amounts of time on land. Here, we evaluate the nutritional needs of polar bears as well as the physiological and environmental constraints that shape their use of terrestrial ecosystems. Only small numbers of polar bears have been documented consuming terrestrial foods even in modest quantities. Over much of the polar bear's range, limited terrestrial food availability supports only low densities of much smaller, resident brown bears (Ursus arctos), which use low-quality resources more efficiently and may compete with polar bears in these areas. Where consumption of terrestrial foods has been documented, polar bear body condition and survival rates have declined even as land use has increased. Thus far, observed consumption of terrestrial food by polar bears has been insufficient to offset lost ice-based hunting opportunities but can have ecological consequences for other species. Warming-induced loss of sea ice remains the primary threat faced by polar bears.

  11. Ancient Hybridization and an Irish Origin for the Modern Polar Bear Matriline

    Science.gov (United States)

    Edwards, Ceiridwen J.; Suchard, Marc A.; Lemey, Philippe; Welch, John J.; Barnes, Ian; Fulton, Tara L.; Barnett, Ross; O’Connell, Tamsin C.; Coxon, Peter; Monaghan, Nigel; Valdiosera, Cristina E.; Lorenzen, Eline D.; Willerslev, Eske; Baryshnikov, Gennady F.; Rambaut, Andrew; Thomas, Mark G.; Bradley, Daniel G.; Shapiro, Beth

    2015-01-01

    Summary Background Polar bears (Ursus maritimus) are among those species most susceptible to the rapidly changing arctic climate, and their survival is of global concern. Despite this, little is known about polar bear species history. Future conservation strategies would significantly benefit from an understanding of basic evolutionary information, such as the timing and conditions of their initial divergence from brown bears (U. arctos) or their response to previous environmental change. Results We used a spatially explicit phylogeographic model to estimate the dynamics of 242 brown bear and polar bear matrilines sampled throughout the last 120,000 years and across their present and past geographic ranges. Our results show that the present distribution of these matrilines was shaped by a combination of regional stability and rapid, long-distance dispersal from ice-age refugia. In addition, hybridization between polar bears and brown bears may have occurred multiple times throughout the Late Pleistocene. Conclusions The reconstructed matrilineal history of brown and polar bears has two striking features. First, it is punctuated by dramatic and discrete climate-driven dispersal events. Second, opportunistic mating between these two species as their ranges overlapped has left a strong genetic imprint. In particular, a likely genetic exchange with extinct Irish brown bears forms the origin of the modern polar bear matriline. This suggests that interspecific hybridization not only may be more common than previously considered but may be a mechanism by which species deal with marginal habitats during periods of environmental deterioration. PMID:21737280

  12. Non-contacting "snubber bearing" for passive magnetic bearing systems

    Science.gov (United States)

    Post, Richard F

    2017-08-22

    A new non-contacting magnetic "snubber" bearing is provided for application to rotating systems such as vehicular electromechanical battery systems subject to frequent accelerations. The design is such that in the equilibrium position the drag force of the snubber is very small (milliwatts). However in a typical case, if the rotor is displaced by as little as 2 millimeters a large restoring force is generated without any physical contact between the stationary and rotating parts of the snubber bearing.

  13. Polar Bear Optimization Algorithm: Meta-Heuristic with Fast Population Movement and Dynamic Birth and Death Mechanism

    OpenAIRE

    Dawid Połap; Marcin Woz´niak

    2017-01-01

    In the proposed article, we present a nature-inspired optimization algorithm, which we called Polar Bear Optimization Algorithm (PBO). The inspiration to develop the algorithm comes from the way polar bears hunt to survive in harsh arctic conditions. These carnivorous mammals are active all year round. Frosty climate, unfavorable to other animals, has made polar bears adapt to the specific mode of exploration and hunting in large areas, not only over ice but also water. The proposed novel mat...

  14. Predicting climate change impacts on polar bear litter size

    OpenAIRE

    Molnár, Péter K.; Derocher, Andrew E.; Klanjšček, Tin; Lewis, Mark A.

    2011-01-01

    Predicting the ecological impacts of climate warming is critical for species conservation. Incorporating future warming into population models, however, is challenging because reproduction and survival cannot be measured for yet unobserved environmental conditions. In this study, we use mechanistic energy budget models and data obtainable under current conditions to predict polar bear litter size under future conditions. In western Hudson Bay, we predict climate warming-induced litter size de...

  15. Analysis of Space Station Centrifuge Rotor Bearing Systems: A Case Study

    Science.gov (United States)

    Poplawski, Joseph V.; Loewenthal, Stuart H.; Oswald, Fred B.; Zaretsky, Erwin V.; Morales, Wilfredo; Street, Kenneth W., Jr.

    2014-01-01

    A team of NASA bearing and lubrication experts was assembled to assess the risk for the rolling-element bearings used in the International Space Station (ISS) centrifuge rotor (CR) to seize or otherwise fail to survive for the required 10-year life. The CR was designed by the Japan Aerospace Exploration Agency and their subcontractor, NEC Toshiba Space Systems, Ltd. (NTSpace). The NASA team performed a design audit for the most critical rolling-element bearing systems and reviewed the lubricant selected. There is uncertainty regarding the ability of the Braycote 601 grease (Castrol Limited) to reliably provide the 10-year continuous life required without relubrication of the system. The fatigue life of the Rotor Shaft Assembly (RSA) spring loaded face-to-face mount at a 99-percent probability of survival (L1 life) for the ball bearing set was estimated at 700 million hours and the single ball bearing (Row 3) at 58 million hours. These lives satisfy the mission requirements for fatigue. Rolling-element seizure tests on the RSA and fluid slip joint bearings were found unlikely to stop the centrifuge, which can cause damage to the ISS structure. The spin motor encoder duplex angular-contact ball bearings have a hard preload and a large number of small balls have the highest risk of failure. These bearings were not tested for seizure even though they are less tolerant to debris or internal clearance reductions.

  16. The Commissioning of the LHC Technical Systems

    CERN Document Server

    Saban, R; Baggiolini, V; Ballarino, A; Barbero-Soto, E; Bellesia, B; Bordry, Frederick; Bozzini, D; Casas-Lino, M-P; Chareyre, V; Claudet, S; Coelingh, G-J; Dahlerup-Petersen, K; Denz, R; Fehér, S; Flora, R; Gruwé, M; Kain, V; Kirby, G; Koratzinos, M; Lauckner, R; Le Naour, S; Mess, K-H; Millet, F; Montabonnet, V; Nisbet, D; Perea-Solano, B; Pojer, M; Principe, R; Rabehl, R; Rijllart, A; Redaelli, S; Rodríguez-Mateos, F; Schmidt, R; Serio, L; Siemko, A; Solfaroli-Camillocci, M; Thiesen, H; Venturini, W; Vergara-Fernandez, A; Verweij, A; Zerlauth, M

    2007-01-01

    The LHC is an accelerator with unprecedented complexity where the energy stored in magnets and the beams exceeds other accelerators by one-to-two orders of magnitude. To ensure a safe and efficient machine start-up without being plagued by technical problems, a phase of "hardware commissioning" was introduced: a thorough commissioning of technical systems without beam. This activity started in June 2005 with the commissioning of individual systems, followed by operating a full sector, one eighth of the machine; the commissioning is expected to last until spring 2008 when commissioning with beam will start. The LHC architecture allows the commissioning of each of the eight sectors independently from the others, before the installation of other sectors is complete. An important effort went into the definition of the programme and the organization of the coordination in the field, as well as in the preparation of the tools to record and analyze test results. This paper discusses the experience with this approach...

  17. Mixed-mu superconducting bearings

    Science.gov (United States)

    Hull, John R.; Mulcahy, Thomas M.

    1998-01-01

    A mixed-mu superconducting bearing including a ferrite structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet structure. The ferrite structure is levitated by said stationary permanent magnet structure.

  18. Population ecology of polar bears in Davis Strait, Canada and Greenland

    Science.gov (United States)

    Peacock, Elizabeth; Taylor, Mitchell K.; Laake, Jeffrey L.; Stirling, Ian

    2013-01-01

    Until recently, the sea ice habitat of polar bears was understood to be variable, but environmental variability was considered to be cyclic or random, rather than progressive. Harvested populations were believed to be at levels where density effects were considered not significant. However, because we now understand that polar bear demography can also be influenced by progressive change in the environment, and some populations have increased to greater densities than historically lower numbers, a broader suite of factors should be considered in demographic studies and management. We analyzed 35 years of capture and harvest data from the polar bear (Ursus maritimus) subpopulation in Davis Strait, including data from a new study (2005–2007), to quantify its current demography. We estimated the population size in 2007 to be 2,158 ± 180 (SE), a likely increase from the 1970s. We detected variation in survival, reproductive rates, and age-structure of polar bears from geographic sub-regions. Survival and reproduction of bears in southern Davis Strait was greater than in the north and tied to a concurrent dramatic increase in breeding harp seals (Pagophilus groenlandicus) in Labrador. The most supported survival models contained geographic and temporal variables. Harp seal abundance was significantly related to polar bear survival. Our estimates of declining harvest recovery rate, and increasing total survival, suggest that the rate of harvest declined over time. Low recruitment rates, average adult survival rates, and high population density, in an environment of high prey density, but deteriorating and variable ice conditions, currently characterize the Davis Strait polar bears. Low reproductive rates may reflect negative effects of greater densities or worsening ice conditions.

  19. Columbia Crew Survival Investigation Report

    Science.gov (United States)

    2009-01-01

    NASA commissioned the Columbia Accident Investigation Board (CAIB) to conduct a thorough review of both the technical and the organizational causes of the loss of the Space Shuttle Columbia and her crew on February 1, 2003. The accident investigation that followed determined that a large piece of insulating foam from Columbia s external tank (ET) had come off during ascent and struck the leading edge of the left wing, causing critical damage. The damage was undetected during the mission. The CAIB's findings and recommendations were published in 2003 and are available on the web at http://caib.nasa.gov/. NASA responded to the CAIB findings and recommendations with the Space Shuttle Return to Flight Implementation Plan. Significant enhancements were made to NASA's organizational structure, technical rigor, and understanding of the flight environment. The ET was redesigned to reduce foam shedding and eliminate critical debris. In 2005, NASA succeeded in returning the space shuttle to flight. In 2010, the space shuttle will complete its mission of assembling the International Space Station and will be retired to make way for the next generation of human space flight vehicles: the Constellation Program. The Space Shuttle Program recognized the importance of capturing the lessons learned from the loss of Columbia and her crew to benefit future human exploration, particularly future vehicle design. The program commissioned the Spacecraft Crew Survival Integrated Investigation Team (SCSIIT). The SCSIIT was asked to perform a comprehensive analysis of the accident, focusing on factors and events affecting crew survival, and to develop recommendations for improving crew survival for all future human space flight vehicles. To do this, the SCSIIT investigated all elements of crew survival, including the design features, equipment, training, and procedures intended to protect the crew. This report documents the SCSIIT findings, conclusions, and recommendations.

  20. USE OF SULFUR AND NITROGEN STABLE ISOTOPES TO DETERMINE THE IMPORTANCE OF WHITEBARK PINE NUTS TO YELLOWSTONE GRIZZLY BEARS

    Science.gov (United States)

    Whitebark pine (Pinus albicaulis) is a masting species that produces relatively large, fat and protein-rich nuts that are consumed by grizzly bears (Ursus arctos horribilis). Trees produce abundant nut crops in some years and poor crops in other years. Grizzly bear survival in ...

  1. Lateral dampers for thrust bearings

    Science.gov (United States)

    Hibner, D. H.; Szafir, D. R.

    1985-01-01

    The development of lateral damping schemes for thrust bearings was examined, ranking their applicability to various engine classes, selecting the best concept for each engine class and performing an in-depth evaluation. Five major engine classes were considered: large transport, military, small general aviation, turboshaft, and non-manrated. Damper concepts developed for evaluation were: curved beam, constrained and unconstrained elastomer, hybrid boost bearing, hydraulic thrust piston, conical squeeze film, and rolling element thrust face.

  2. Large Hadron Collider commissioning and first operation.

    Science.gov (United States)

    Myers, S

    2012-02-28

    A history of the commissioning and the very successful early operation of the Large Hadron Collider (LHC) is described. The accident that interrupted the first commissioning, its repair and the enhanced protection system put in place are fully described. The LHC beam commissioning and operational performance are reviewed for the period from 2010 to mid-2011. Preliminary plans for operation and future upgrades for the LHC are given for the short and medium term.

  3. Radial magnetic bearings: An overview

    Directory of Open Access Journals (Sweden)

    Weiyu Zhang

    Full Text Available Radial magnetic bearings (RMBs are one of the most commonly used magnetic bearings. They are used widely in the field of ultra-high speed and ultra-precise numerical control machine tools, bearingless motors, high speed flywheels, artificial heart pumps, and molecular pumps, and they are being strengthened and extended in various important areas. In this paper, a comprehensive overview is given of different bearing topologies of RMBs with different stator poles that differ in their construction, the driving mode of electromagnets, power consumption, cost, magnetic circuits, and symmetry. RMBs with different poles and couplings between the two bearing axes in the radial direction responsible for cross-coupling generation are compared. In addition, different shaped rotors are compared, as the performances of magnetic bearing-rotor systems are of great concern to rotor constructions. Furthermore, the parameter design methods, the mathematical models and control strategies of the RMBs are described in detail. From the comparison of topologies, models and control methods for RMBs, the advantages, disadvantages and utilizable perspectives are also analyzed. Moreover, several possible development trends of the RMBs are discussed. Keywords: Radial magnetic bearings (RMBs, Topologies, Mathematical mode, Control strategies, Development trends

  4. Federal Energy Regulatory Commission (FERC) Regions

    Data.gov (United States)

    Department of Homeland Security — Federal Energy Regulatory Commission (FERC) Regions. FERC is an independent agency that regulates the interstate transmission of electricity, natural gas, and oil....

  5. Annual report of the Marine Mammal Commission, calendar year 1992. Report to the Congress

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-31

    This is the 20th Annual Report of the Marine Mammal Commission and its Committee of Scientific Advisors on Marine Mammals. The Commission was established under Title II of the Marine Mammal Protection Act to provide an independent source of guidance on Federal activities and policies, both domestic and international, affecting marine mammal protection and conservation. Each year, the Marine Mammal Commission and its Committee of Scientific Advisors devote particular attention to marine mammal species or populations that are or may be in jeopardy. Chapter III describes efforts to conserve: sea otters in California and Alaska; Steller sea lions; Hawaiian monk seals; harbor seals; northern fur seals; Pacific walruses; northern right whales; humpback whales; gray whales; bowhead whales; harbor porpoises; vaquitas or Gulf of California harbor porpoises; bottlenose dolphins; killer whales; and polar bears. Activities related to West Indian manatees, Hawaiian monk seals, vaquitas, and gray whales are summarized.

  6. Commissioning of SAGA Light Source

    CERN Document Server

    Tomimasu, Takio; Koda, Shigeru; Ohgaki, Hideaki; Takabayashi, Yuichi; Toyokawa, Hiroyuki; Yasumoto, Masato; Yoshida, Katuhide

    2005-01-01

    The SAGA Light Source (SAGA-LS) consists of a 250-MeV electron linac injector and an eight-hold symmetry 1.4-GeV storage ring with eight double-bend (DB) cell and eight 2.93-m long straight sections. The DB cell structure with a distributed dispersion system was chosen to produce a compact ring of 75.6-m long circumference. The machine construction begun September 29, 2003. The ring magnets of steel laminated structure, vacuum chambers made of aluminum alloy, pumping systems and four temperature controlled cooling water systems for the linac accelerating wave guides etc. were installed in March, 2004. The injector, a 500-MHz ring rf damped cavity, rf klystrons, beam transport systems for injection and their controlled systems were installed in July, 2004. The commissioning begun August 25, 2004. A 250-MeV beam was accelerated on September 29. The beam size is 1-mm in diameter and the energy spread is 0.8 % (FWHM). The first revolution of 250-MeV beam around the ring took place October 22. Beam was stored on N...

  7. EVALUATION OF A LOW FRICTION - HIGH EFFICIENCY ROLLER BEARING ENGINE

    Energy Technology Data Exchange (ETDEWEB)

    Kolarik, Robert V. II; Shattuck, Charles W.; Copper, Anthony P.

    2009-06-30

    This Low Friction (High Efficiency Roller Bearing) Engine (LFE) report presents the work done by The Timken Company to conduct a technology demonstration of the benefits of replacing hydrodynamic bearings with roller bearings in the crankshaft and camshaft assemblies of an internal combustion engine for the purpose of collecting data sufficient to prove merit. The engines in the present study have been more extensively converted to roller bearings than any previous studies (40 needle roller bearings per engine) to gain understanding of the full potential of application of bearing technology. The project plan called for comparative testing of a production vehicle which was already respected for having demonstrated low engine friction levels with a rollerized version of that engine. Testing was to include industry standard tests for friction, emissions and fuel efficiency conducted on instrumented dynamometers. Additional tests for fuel efficiency, cold start resistance and other measures of performance were to be made in the actual vehicle. Comparative measurements of noise, vibration and harshness (NVH), were planned, although any work to mitigate the suspected higher NVH level in the rollerized engine was beyond the scope of this project. Timken selected the Toyota Avalon with a 3.5L V-6 engine as the test vehicle. In an attempt to minimize cost and fabrication time, a ‘made-from’ approach was proposed in which as many parts as possible would be used or modified from production parts to create the rollerized engine. Timken commissioned its test partner, FEV Engine Technology, to do a feasibility study in which they confirmed that using such an approach was possible to meet the required dimensional restrictions and tolerances. In designing the roller bearing systems for the crank and cam trains, Timken utilized as many production engine parts as possible. The crankshafts were produced from production line forgings, which use Timken steel, modified with special

  8. 36 CFR 13.1236 - Bear orientation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Bear orientation. 13.1236... Developed Area § 13.1236 Bear orientation. All persons visiting the BCDA must receive an NPS-approved Bear Orientation. Failure to receive an NPS-approved Bear Orientation is prohibited. ...

  9. Oil and gas planning and development in Alberta : new approaches to integrate grizzly bear conservation

    Energy Technology Data Exchange (ETDEWEB)

    Stenhouse, G. [Foothills Model Forest Grizzly Bear Research Program, AB (Canada)

    2007-07-01

    This paper reported on a grizzly bear research program that was initiated in the province of Alberta to provide new knowledge and tools to ensure the long term survival of grizzly bears on a multiple use landscape. The Foothills Model Forest (FMF) Grizzly Bear Research Program was formed by scientists from across Canada from a variety of scientific disciplines. A strong partner base has been created to allow the FMF's research efforts to span the entire current distribution of grizzly bear habitat in Alberta. The FMF has provided new large scale seamless maps of grizzly bear habitat and, using detailed grizzly bear GPS movement data, has constructed and tested models that can identify key grizzly bear habitat. This presentation focused on the results of 9 years of applied research and described the new tools and models that are now available to program partners in Alberta. The products are currently being used by both industry and government in Alberta as new standards in landscape management planning in grizzly bear habitat. The author suggested that the approach taken with grizzly bears in Alberta could be used and adapted for a variety of wildlife species in the north. figs.

  10. The Lancet Commission on Syria | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Commission on Syria: Health in conflict” for The Lancet, one of the most prestigious medical and health science publications in the world. The journal has adopted a series of global commissions that convene groups of experts for a limited time to ...

  11. 76 FR 72452 - CFC-50 Commission

    Science.gov (United States)

    2011-11-23

    ... Doc No: 2011-30240] OFFICE OF PERSONNEL MANAGEMENT CFC-50 Commission AGENCY: Office of Personnel Management. ACTION: Establishment of advisory committee. SUMMARY: The CFC-50 Advisory Commission will hold... operation and effectiveness of the Combined Federal Campaign (CFC) to ensure its continued growth and...

  12. 76 FR 55424 - CFC-50 Commission

    Science.gov (United States)

    2011-09-07

    ... MANAGEMENT CFC-50 Commission AGENCY: Office of Personnel Management. ACTION: Establishment of advisory committee. SUMMARY: The U.S. Office of Personnel Management announces the establishment of the CFC-50... (CFC) to ensure its continued growth and success. The Commission is an advisory committee composed of...

  13. 10 CFR 1.11 - The Commission.

    Science.gov (United States)

    2010-01-01

    ... ultimate authority for all NRC functions pertaining to an emergency involving an NRC Licensee. The Chairman... statutes. These responsibilities include protecting public health and safety, protecting the environment... REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION Headquarters § 1.11 The Commission...

  14. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    Tiziano Camporesi

    Pit commissioning activities The last 4 months have seen various major achievements in hardware commissioning, global data taking, readiness of the DPGs to deal with LHC data flows and alignment and calibration workflows. Since February, the global commissioning has been characterized on the one side by more and more of the final CMS detector becoming available for global readout and triggering and on the other side by consolidation of many of the central software infrastructure and of most of the services infrastructure. The reliability of services like cooling, power, gas has markedly improved with respect to what we observed in the second half of 2007.   Of particular note are the delivery of all low voltage power supplies, the commissioning of the final power distribution, the progressive commissioning ( still ongoing)  of the Detector Safety System and of the associated DCS early warning and alarm system. On the detector side, while already we are used to seeing all of HCAL being exe...

  15. A Practical Guide for Commissioning Existing Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Haasl, T.; Sharp, T.

    1999-04-01

    Although this guide focuses on the retrocommissioning process and its advantages, all three types of commissioning--retrocommissioning, commissioning, and recommissioning--play an equally important role in ensuring that buildings perform efficiently and provide comfortable, safe, and productive work environments for owners and occupants. For new construction and retrofit projects, commissioning should be incorporated early, during design, and last throughout the length of the project. For buildings that were never commissioned, the retrocommissioning process can yield a wealth of cost-saving opportunities while enhancing a building's environment. Finally, once a building is commissioned or retrocommissioned, incorporating recommissioning into the organization's O and M program (by periodically reapplying the original diagnostic testing and checklist procedures) helps ensure that cost savings and other benefits gained from the original process persist over time.

  16. A Practical Guide for Commissioning Existing Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Haasl, T.

    1999-05-11

    Although this guide focuses on the retrocommissioning process and its advantages, all three types of commissioning--retrocommissioning, commissioning, and recommissioning--play an equally important role in ensuring that buildings perform efficiently and provide comfortable, safe, and productive work environments for owners and occupants. For new construction and retrofit projects, commissioning should be incorporated early, during design, and last throughout the length of the project. For buildings that were never commissioned, the retrocommissioning process can yield a wealth of cost-saving opportunities while enhancing a building's environment. Finally, once a building is commissioned or retrocommissioned, incorporating recommissioning into the organization's O and M program (by periodically reapplying the original diagnostic testing and checklist procedures) helps ensure that cost savings and other benefits gained from the original process persist over time.

  17. Exertional myopathy in a grizzly bear (Ursus arctos) captured by leghold snare.

    Science.gov (United States)

    Cattet, Marc; Stenhouse, Gordon; Bollinger, Trent

    2008-10-01

    We diagnosed exertional myopathy (EM) in a grizzly bear (Ursus arctos) that died approximately 10 days after capture by leghold snare in west-central Alberta, Canada, in June 2003. The diagnosis was based on history, post-capture movement data, gross necropsy, histopathology, and serum enzyme levels. We were unable to determine whether EM was the primary cause of death because autolysis precluded accurate evaluation of all tissues. Nevertheless, comparison of serum aspartate aminotransferase and creatine kinase concentrations and survival between the affected bear and other grizzly bears captured by leghold snare in the same research project suggests EM also occurred in other bears, but that it is not generally a cause of mortality. We propose, however, occurrence of nonfatal EM in grizzly bears after capture by leghold snare has potential implications for use of this capture method, including negative effects on wildlife welfare and research data.

  18. Future for polar bears in a declining sea ice environment: What do we know?

    Science.gov (United States)

    Amstrup, Steven C.

    2006-01-01

    During an April 22, 2006, interview on the CBC radio program “The House,” Tim Flannery, author of the recent book “The Weathermakers,” stated, “Projections of the polar bear specialists are that by about 2030, around that date, the species will be extinct because of global warming induced changes in the Arctic sea ice.” That statement was followed on May 4th by quotations in the Toronto Globe and Mail from Dr. Mitch Taylor, a polar bear researcher in Nunavut, Canada, claiming, “polar bears have survived both warmer times and colder times than these,” that “nothing has melted the Arctic sea ice for 30 million years,” that “polar bears are remarkably adaptable,” and that “a warming climate might even benefit polar bears.”

  19. Basic Expeditionary Airfield Resources (BEAR) Mission Brief

    Science.gov (United States)

    2011-11-02

    BEAR Modernization Sustainment (GS-12 Vacant), BEAR Sustainment Readiness Mr. Jeff Leviner, Ctr, BEAR Readiness Logistics Program Analyst Mr. Bill...Lawrence, Civ, BEAR Modernization Logistics Manager Logistics Manager Ms. Kim Vollman, Ctr, BEAR Sustainment Program Analyst manager 2G...generally in Feb Storage Locations South Korea Osan AB Gunsan AB Sola , Norway AFCENT AOR Thumrait Letterkenny, PA Bluegrass, KY Daegu AB Suwon AB

  20. Temporal, spatial, and environmental influences on the demographics of grizzly bears in the Greater Yellowstone Ecosystem

    Science.gov (United States)

    Schwartz, Charles C.; Haroldson, Mark A.; White, Gary C.; Harris, Richard B.; Cherry, Steve; Keating, Kim A.; Moody, Dave; Servheen, Christopher

    2006-01-01

    During the past 2 decades, the grizzly bear (Ursus arctos) population in the Greater Yellowstone Ecosystem (GYE) has increased in numbers and expanded in range. Understanding temporal, environmental, and spatial variables responsible for this change is useful in evaluating what likely influenced grizzly bear demographics in the GYE and where future management efforts might benefit conservation and management. We used recent data from radio-marked bears to estimate reproduction (1983–2002) and survival (1983–2001); these we combined into models to evaluate demographic vigor (lambda [λ]). We explored the influence of an array of individual, temporal, and spatial covariates on demographic vigor.

  1. 'Dodo' and 'Baby Bear' Trenches

    Science.gov (United States)

    2008-01-01

    NASA's Phoenix Mars Lander's Surface Stereo Imager took this image on Sol 11 (June 5, 2008), the eleventh day after landing. It shows the trenches dug by Phoenix's Robotic Arm. The trench on the left is informally called 'Dodo' and was dug as a test. The trench on the right is informally called 'Baby Bear.' The sample dug from Baby Bear will be delivered to the Phoenix's Thermal and Evolved-Gas Analyzer, or TEGA. The Baby Bear trench is 9 centimeters (3.1 inches) wide and 4 centimeters (1.6 inches) deep. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  2. Polar bear population dynamics in the southern Beaufort Sea during a period of sea ice decline.

    Science.gov (United States)

    Bromaghin, Jeffrey F; Mcdonald, Trent L; Stirling, Ian; Derocher, Andrew E; Richardson, Evan S; Regehr, Eric V; Douglas, David C; Durner, George M; Atwood, Todd; Amstrup, Steven C

    2015-04-01

    In the southern Beaufort Sea of the United States and Canada, prior investigations have linked declines in summer sea ice to reduced physical condition, growth, and survival of polar bears (Ursus maritimus). Combined with projections of population decline due to continued climate warming and the ensuing loss of sea ice habitat, those findings contributed to the 2008 decision to list the species as threatened under the U.S. Endangered Species Act. Here, we used mark-recapture models to investigate the population dynamics of polar bears in the southern Beaufort Sea from 2001 to 2010, years during which the spatial and temporal extent of summer sea ice generally declined. Low survival from 2004 through 2006 led to a 25-50% decline in abundance. We hypothesize that low survival during this period resulted from (1) unfavorable ice conditions that limited access to prey during multiple seasons; and possibly, (2) low prey abundance. For reasons that are not clear, survival of adults and cubs began to improve in 2007 and abundance was comparatively stable from 2008 to 2010, with ~900 bears in 2010 (90% CI 606-1212). However, survival of subadult bears declined throughout the entire period. Reduced spatial and temporal availability of sea ice is expected to increasingly force population dynamics of polar bears as the climate continues to warm. However, in the short term, our findings suggest that factors other than sea ice can influence survival. A refined understanding of the ecological mechanisms underlying polar bear population dynamics is necessary to improve projections of their future status and facilitate development of management strategies.

  3. The Pepper Commission Report and the response.

    Science.gov (United States)

    1990-01-01

    The recommendations of the "Pepper Commission" [the Bipartisan Commission on Comprehensive Health Care] on health care policy reform (see box on page 20) would cost an estimated $66 billion to implement. As a result, many in Congress already have declared the Pepper report to be politically nonviable. Nevertheless, Commission Chairman John D. Rockefeller IV intends to pursue legislative activity on the report. Recently, Rockefeller said that the Commission's majority recommendations likely will be offered in Congress as one large bill--with the option to break out some of its features for individual consideration. For example, Rockefeller said he will try this year to enact the Commission's recommendations to improve health care coverage for pregnant women and children--as well as suggestions for reform in the health insurance industry. The West Virginia senator said he believes these two proposals will cost about $3.5 billion in new federal funds. The basics of the plan, and the political obstacles facing its enactment, were discussed by several members of the Pepper Commission during the press conference at which the recommendations were unveiled. FAHS Review covered that press conference, and below we reprint excerpts from a tape transcription of the remarks of several Commission members.

  4. Instrumented home energy rating and commissioning

    Energy Technology Data Exchange (ETDEWEB)

    Wray, Craig P.; Walker, Iain S.; Sherman, Max H.

    2003-05-01

    Currently, houses do not perform optimally or even as many codes and forecasts predict, largely because they are field assembled and there is no consistent process to identify deficiencies or to correct them. Solving this problem requires field performance evaluations using appropriate and agreed upon procedures in the form of a new process called residential commissioning. The purpose of this project is to develop and document these procedures and to demonstrate the value that applying them could provide in both new and existing California houses. This project has four specific objectives: to develop metrics and diagnostics for assessing house performance, to provide information on the potential benefits of commissioning using a whole-house approach, to develop programmatic guidelines for commissioning, and to conduct outreach efforts to transfer project results to industry stakeholders. The primary outcomes from this project are the development of residential commissioning guidelines and the analytical confirmation that there are significant potential benefits associated with commissioning California houses, particularly existing ones. In addition, we have made substantial advances in understanding the accuracy and usability of diagnostics for commissioning houses. In some cases, we have been able to work with equipment manufacturers to improve these aspects of their diagnostic tools. These outcomes provide a solid foundation on which to build a residential commissioning program in California. We expect that a concerted effort will be necessary to integrate such a program with existing building industry efforts and to demonstrate its use in the field.

  5. The influence of climate variability on polar bear (Ursus maritimus) and ringed seal (Pusa hispida) population dynamics

    DEFF Research Database (Denmark)

    Rosing-Asvid, A.

    2006-01-01

    Unusually high polar bear (Ursus maritimus Phipps, 1774) predation on ringed seal (Pusa hispida (Schreber, 1775)) pups and increased survival of polar bear cubs during mild springs is documented in published articles. Strong predation on newborn ringed seal pups in early spring, however, is likely...... to lower the overall energy intake of polar bears if ringed seal pups are their main food, because the energetic value of ringed seal pups increases 7-8 times during the 6 week lactation period. So although hunting success in early spring increases cub survival during the period after den emergence......,when they are most vulnerable, it is likely to increase the number of starving bears later in the season. This negative-feedback effect of strong spring predation will not occur in areas where other seal species are abundant during summer, and polar bears in such areas are likely to exhibit population growth during...

  6. Official communication of the Safety Commission

    CERN Multimedia

    DG Unit

    2009-01-01

    The Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of 2 April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch

  7. Official communication of the Safety Commission

    CERN Multimedia

    DG Unit

    2009-01-01

    We, the Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of the 2nd April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch

  8. Permanent Commission for Health and Safety

    CERN Multimedia

    Association du personnel

    2007-01-01

    The mandate of the Staff Association's permanent commission for Health and Safety is to examine all aspects of health and safety related to the working environment at CERN. In no way does it wish to be a substitute for the official bodies that are responsible for these matters. The Commission's aim is to formulate remarks on and make proposals about these questions to the relevant bodies and the CERN Management. Its main focus is the safety of the CERN staff but it is also concerned with the safety of the installations and of the CERN environment. The Commission reports to the Staff Council and the Executive Committee of the Staff Association.

  9. The European Commission as Network Broker

    DEFF Research Database (Denmark)

    Borras, Susana

    2007-01-01

    Recent transformations in the European Union have been putting significant pressure on the management function of the European Commission. Examining its brokerage position in policy networks, this article asks what kind of role does the Commission have in the political interactions in Brussels...... after the year 2000. Developing a conceptual framework about brokerage roles in EU policy, the article uses a combination of quantitative and qualitative data in an empirical analysis of two very different cases where the Commission has been embattled the past years. The article argues that previous...

  10. Hibernation and seasonal fasting in bears: the energetic costs and consequences for polar bears

    National Research Council Canada - National Science Library

    Charles T. Robbins; Claudia Lopez-Alfaro; Karyn D. Rode; Øivind Tøien; O. Lynne Nelson

    2012-01-01

    ...–fall fasting when polar bears (Ursus maritimus) lose access to most marine mammals. To evaluate the consequences of such changes, we compared the cost of fasting by polar bears with hibernation by brown bears (U. arctos...

  11. BEAR AT THE BACK DOOR

    African Journals Online (AJOL)

    BEAR AT THE BACK DOOR. Deur generaal sir Walter Walker KCB, CBE,. D80. 8andton. Uitgegee deur Valiant Publis- hers. Verskyningsdatum Julie 1978. Prys R10.) Hierdie boek is 'n uitstekende aktuele geskrif ook. Suidelike Afrika se politieke en militere aspekte wat deur 'n a/gehele buitestaander nl 'n Britse. Generaal ...

  12. Little Bear Fire Summary Report

    Science.gov (United States)

    Sarah McCaffrey; Melanie Stidham; Hannah. Brenkert-Smith

    2013-01-01

    In June 2012, immediately after the Little Bear Fire burned outside Ruidoso, New Mexico, a team of researchers interviewed fire managers, local personnel, and residents to understand perceptions of the event itself, communication, evacuation, and pre-fire preparedness. The intensity of fire behavior and resulting loss of 242 homes made this a complex fire with a...

  13. Intelligent Engine Systems: Bearing System

    Science.gov (United States)

    Singh, Arnant P.

    2008-01-01

    The overall requirements necessary for sensing bearing distress and the related criteria to select a particular rotating sensor were established during the phase I. The current phase II efforts performed studies to evaluate the Robustness and Durability Enhancement of the rotating sensors, and to design, and develop the Built-in Telemetry System concepts for an aircraft engine differential sump. A generic test vehicle that can test the proposed bearing diagnostic system was designed, developed, and built. The Timken Company, who also assisted with testing the GE concept of using rotating sensors for the differential bearing diagnostics during previous phase, was selected as a subcontractor to assist General Electric (GE) for the design, and procurement of the test vehicle. A purchase order was prepared to define the different sub-tasks, and deliverables for this task. The University of Akron was selected to provide the necessary support for installing, and integrating the test vehicle with their newly designed test facility capable of simulating the operating environment for the planned testing. The planned testing with good and damaged bearings will be on hold pending further continuation of this effort during next phase.

  14. Determinants of lifetime reproduction in female brown bears: early body mass, longevity, and hunting regulations.

    Science.gov (United States)

    Zedrosser, Andreas; Pelletier, Fanie; Bischof, Richard; Festa-Bianchet, Marco; Swenson, Jon E

    2013-01-01

    In iteroparous mammals, conditions experienced early in life may have long-lasting effects on lifetime reproductive success. Human-induced mortality is also an important demographic factor in many populations of large mammals and may influence lifetime reproductive success. Here, we explore the effects of early development, population density, and human hunting on survival and lifetime reproductive success in brown bear (Ursus arctos) females, using a 25-year database of individually marked bears in two populations in Sweden. Survival of yearlings to 2 years was not affected by population density or body mass. Yearlings that remained with their mother had higher survival than independent yearlings, partly because regulations prohibit the harvest of bears in family groups. Although mass as a yearling did not affect juvenile survival, it was positively associated with measures of lifetime reproductive success and individual fitness. The majority of adult female brown bear mortality (72%) in our study was due to human causes, mainly hunting, and many females were killed before they reproduced. Therefore, factors allowing females to survive several hunting seasons had a strong positive effect on lifetime reproductive success. We suggest that, in many hunted populations of large mammals, sport harvest is an important influence on both population dynamics and life histories.

  15. Aspects and implications of bear reintroduction: Chapter 6

    Science.gov (United States)

    Clark, Joseph D.; Hayward, Matt W.; Somers, Michael J.

    2009-01-01

    Bear reintroduction has been practiced worldwide with varying degrees of success.  Homing is a significant issue for American black bears, Ursus americanus, and winter-release techniques of females with cubs have been successfully used to improve settling rates and survival. Reintroduction success for all bear species appears to be positively correlated with translocation distance, and success is greater for subadults and females. Animals bred or held in captivity are usually poor candidates for reintroduction, but that may be the only option for some rare species. Habitat analyses are routinely performed, but patch size and configuration may also be important considerations for choosing future reintroduction sites for these wide-ranging species. Biological realities aside, socio-political impediments are more difficult to overcome because of real and perceived threats to human safety and property. Poor public acceptance and understanding were the most important reasons for some bear reintroduction failures, and conservation biologists need to develop methods for identifying areas where co-habitation suitability is high. Citizen-led approaches to develop acceptable restoration strategies may be useful for gaining public acceptance of large-carnivore reintroduction efforts, and public acceptance is where the greatest challenge lies.

  16. Climate Change, Polar Bears and their management

    OpenAIRE

    Derenchenko, Liza

    2010-01-01

    This is a literature study of polar bears in the context of climate change: what kind of creatures are polar bears, what are the main interpretations of current climate change, how might the polar bear adapt to these changes (feeding strategies) and how are the bears being managed (hunting)? These are relevant questions , since climate change is on the agenda, and polar bears being the apex predators of the Arctic are a key representation of the wildlife there. The third element of polar bear...

  17. 29 CFR 2200.92 - Review by the Commission.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Review by the Commission. 2200.92 Section 2200.92 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION RULES OF PROCEDURE Posthearing Procedures § 2200.92 Review by the Commission. (a) Jurisdiction of the Commission; issues on review. Unless the Commission orders...

  18. 76 FR 24081 - Notice of Commission Determination

    Science.gov (United States)

    2011-04-29

    ..., or Rhinestreet shale formations. DATES: April 21, 2011. ADDRESSES: Susquehanna River Basin Commission... well development projects involving a withdrawal, diversion or consumptive use of water and targeting the Antes, Burket, Geneseo, Mandata, Middlesex, Needmore, or Rhinestreet shale formations shall be...

  19. Federal Trade Commission Semiannual Regulatory Agenda

    Science.gov (United States)

    2010-04-26

    ... CFR 321, 322; (10) Retail Food Store Advertising and Marketing Practices, 16 CFR 424; (11) the... related to RIN 3084-AA85. In 2000, the Commission, the banking agencies, and the Securities and Exchange...

  20. The European Commission as Network Broker

    Directory of Open Access Journals (Sweden)

    Susana Borrás

    2007-03-01

    Full Text Available Recent transformations in the European Union have been putting significant pressure on the management function of the European Commission. Examining its brokerage position in policy networks, this article asks what kind of role does the Commission have in the political interactions in Brussels after the year 2000. Developing a conceptual framework about brokerage roles in EU policy, the article uses a combination of quantitative and qualitative data in an empirical analysis of two very different cases where the Commission has been embattled the past years. The article argues that previous reports of the Commission’s demise are much exaggerated, because it continues playing a leading role in managing interaction between multiple actors at different levels of governance. The empirical results show that the Commission is a resilient central network broker.

  1. LHC injection optics measurements at commissioning (2015)

    CERN Document Server

    Garcia-Tabares Valdivieso, Ana; Coello De Portugal - Martinez Vazquez, Jaime Maria; Garcia-Bonilla, Alba-Carolina; Langner, Andy Sven; Maclean, Ewen Hamish; Malina, Lukas; Mcateer, Meghan Jill; Persson, Tobias Hakan Bjorn; Skowronski, Piotr Krzysztof; Tomas Garcia, Rogelio; CERN. Geneva. ATS Department

    2016-01-01

    This report describes the measurement and correction process followed during the 2015 LHC injection optics commissioning which extended into Machine Developments (MDs). Results have been analyzed and compared to the 2012 measurements.

  2. Securities and Exchange Commission Semiannual Regulatory Agenda

    Science.gov (United States)

    2010-12-20

    ... payments to the purchaser are dependent on the performance of a securities index. On July 12, 2010, a... Agency Contact: Martha Mahan Haines, Division of Trading and Markets, Securities and Exchange Commission...

  3. 29 CFR 1603.304 - Commission decision.

    Science.gov (United States)

    2010-07-01

    ... EXEMPT STATE AND LOCAL GOVERNMENT EMPLOYEE COMPLAINTS OF EMPLOYMENT DISCRIMINATION UNDER SECTION 304 OF THE GOVERNMENT EMPLOYEE RIGHTS ACT OF 1991 Appeals § 1603.304 Commission decision. (a) On behalf of...

  4. The impacts of human recreation on brown bears (Ursus arctos): A review and new management tool

    Science.gov (United States)

    Fortin-noreus, Jennifer; Rode, Karyn D.; Hilderbrand, Grant V; Wilder, James; Farley, Sean; Jorgensen, Carole; Marcot, Bruce G

    2016-01-01

    Increased popularity of recreational activities in natural areas has led to the need to better understand their impacts on wildlife. The majority of research conducted to date has focused on behavioral effects from individual recreations, thus there is a limited understanding of the potential for population-level or cumulative effects. Brown bears (Ursus arctos) are the focus of a growing wildlife viewing industry and are found in habitats frequented by recreationists. Managers face difficult decisions in balancing recreational opportunities with habitat protection for wildlife. Here, we integrate results from empirical studies with expert knowledge to better understand the potential population-level effects of recreational activities on brown bears. We conducted a literature review and Delphi survey of brown bear experts to better understand the frequencies and types of recreations occurring in bear habitats and their potential effects, and to identify management solutions and research needs. We then developed a Bayesian network model that allows managers to estimate the potential effects of recreational management decisions in bear habitats. A higher proportion of individual brown bears in coastal habitats were exposed to recreation, including photography and bear-viewing than bears in interior habitats where camping and hiking were more common. Our results suggest that the primary mechanism by which recreation may impact brown bears is through temporal and spatial displacement with associated increases in energetic costs and declines in nutritional intake. Killings in defense of life and property were found to be minimally associated with recreation in Alaska, but are important considerations in population management. Regulating recreation to occur predictably in space and time and limiting recreation in habitats with concentrated food resources reduces impacts on food intake and may thereby, reduce impacts on reproduction and survival. Our results suggest that

  5. Building commissioning: The key to quality assurance

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    This Guide is written to aid building owners and retrofit project managers currently participating in the Rebuild America program. The Guide provides information on implementing building commissioning projects that will optimize the results of existing building equipment improvements and retrofits projects. It should be used in coordination with Rebuild America`s Community Partnership Handbook. The Handbook describes, in detail, eight important steps necessary for planning and carrying out a community-wide energy-efficiency program. In step number 7 of the Handbook, commissioning is shown to be an integral aspect of implementing a building retrofit. The commissioning process ensures that a facility is safe, efficient, comfortable, and conducive to the presumed activities for which it was constructed. Rebuild America strongly encourages its partners to incorporate commissioning into their retrofit projects. By verifying the correct installation, functioning, operation, and maintenance of equipment, the commissioning process ensures that efficiency measures will continue to deliver benefits over the long term. Although commissioning can take place after the equipment has been installed, it is more effective when it takes place over the entire equipment installation process.

  6. Federal Power Commission 1977 final annual report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-07-01

    This is the 57th and final annual report of the Federal Power Commission. It was prepared so that the Congress and the public will have a full record of the Commission's history. The Commission issued annual reports every year beginning in 1920, except for a five-year period during World War II when abbreviated versions were prepared. The Commission was originally charged with the licensing and regulation of certain uses of the country's water resources, and later was given additional responsibilities, including the regulation of electric rates and services for wholesale transactions, and the regulation of natural gas pipelines and producers, all operating in interstate commerce. The total budget for the Commission in fiscal 1977 was $41,582,000. The Commission's average monthly employment during the year was 1,378. Highlights of 1977 concerning natural gas, electric power, rules and regulations, and legislation are summarized. A history of the FPC is included, followed by in-depth information on natural gas; electric power; legal aspects; and statistics in 4 appendixes. (MCW)

  7. Journal and Wave Bearing Impedance Calculation Software

    Science.gov (United States)

    Hanford, Amanda; Campbell, Robert

    2012-01-01

    The wave bearing software suite is a MALTA application that computes bearing properties for user-specified wave bearing conditions, as well as plain journal bearings. Wave bearings are fluid film journal bearings with multi-lobed wave patterns around the circumference of the bearing surface. In this software suite, the dynamic coefficients are outputted in a way for easy implementation in a finite element model used in rotor dynamics analysis. The software has a graphical user interface (GUI) for inputting bearing geometry parameters, and uses MATLAB s structure interface for ease of interpreting data. This innovation was developed to provide the stiffness and damping components of wave bearing impedances. The computational method for computing bearing coefficients was originally designed for plain journal bearings and tilting pad bearings. Modifications to include a wave bearing profile consisted of changing the film thickness profile given by an equation, and writing an algorithm to locate the integration limits for each fluid region. Careful consideration was needed to implement the correct integration limits while computing the dynamic coefficients, depending on the form of the input/output variables specified in the algorithm.

  8. 25 CFR 513.33 - Will the Commission issue a certification when the Commission is the creditor agency?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Will the Commission issue a certification when the Commission is the creditor agency? 513.33 Section 513.33 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR GENERAL PROVISIONS DEBT COLLECTION Salary Offset § 513.33 Will the Commission issue a certification when the Commission is the...

  9. 76 FR 7839 - Notice of Commission and Commission Staff Attendance at ISO/RTO Council and Regional State...

    Science.gov (United States)

    2011-02-11

    ... Energy Regulatory Commission Notice of Commission and Commission Staff Attendance at ISO/RTO Council and... of the Commission and Commission staff may attend the following ISO/RTO Council and Regional State..., RTO/ISO Performance Metrics. For more information, contact Sandra Waldstein, Office of External...

  10. A Preliminary Foil Gas Bearing Performance Map

    Science.gov (United States)

    DellaCorte, Christopher; Radil, Kevin C.; Bruckner, Robert J.; Howard, S. Adam

    2006-01-01

    Recent breakthrough improvements in foil gas bearing load capacity, high temperature tribological coatings and computer based modeling have enabled the development of increasingly larger and more advanced Oil-Free Turbomachinery systems. Successful integration of foil gas bearings into turbomachinery requires a step wise approach that includes conceptual design and feasibility studies, bearing testing, and rotor testing prior to full scale system level demonstrations. Unfortunately, the current level of understanding of foil gas bearings and especially their tribological behavior is often insufficient to avoid developmental problems thereby hampering commercialization of new applications. In this paper, a new approach loosely based upon accepted hydrodynamic theory, is developed which results in a "Foil Gas Bearing Performance Map" to guide the integration process. This performance map, which resembles a Stribeck curve for bearing friction, is useful in describing bearing operating regimes, performance safety margins, the effects of load on performance and limiting factors for foil gas bearings.

  11. Live-trapping and handling brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This paper reports techniques developed to live trap and handle brown bears on the Kodiak National Wildlife Refuge. The brown bears (Ursus middendorffi) on the...

  12. Live-trapping and handling brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In recent years bears have become increasingly important as big game animals. The brown bears (Ursus middendorfi) on the Kodiak National Wildlife Refuge, Kodiak...

  13. Brown bear telemetry and trapping: Special report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brown bear studies were continued during the 1967 field season with emphasis on development of techniques for instrumenting bears with radio transmitters and...

  14. 75 FR 3448 - Federal Advisory Committee; Military Leadership Diversity Commission

    Science.gov (United States)

    2010-01-21

    ... of the Secretary Federal Advisory Committee; Military Leadership Diversity Commission AGENCY... the Military Leadership Diversity Commission (hereafter referred to as the Commission) on January 15... Freeman, Deputy Committee Management Officer for the Department of Defense, 703-601-6128. SUPPLEMENTARY...

  15. 77 FR 8095 - Technical Corrections to Commission Regulations

    Science.gov (United States)

    2012-02-14

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission 18 CFR Part 2 Technical Corrections to Commission Regulations Issued February 8, 2012. AGENCY: Federal Energy Regulatory Commission, DOE. ACTION: Final rule: correcting...

  16. Stable isotopes to detect food-conditioned bears and to evaluate human-bear management

    Science.gov (United States)

    Hopkins, John B.; Koch, Paul L.; Schwartz, Charles C.; Ferguson, Jake M.; Greenleaf, Schuyler S.; Kalinowski, Steven T.

    2012-01-01

    We used genetic and stable isotope analysis of hair from free-ranging black bears (Ursus americanus) in Yosemite National Park, California, USA to: 1) identify bears that consume human food, 2) estimate the diets of these bears, and 3) evaluate the Yosemite human–bear management program. Specifically, we analyzed the isotopic composition of hair from bears known a priori to be food-conditioned or non-food-conditioned and used these data to predict whether bears with an unknown management status were food-conditioned (FC) or non-food-conditioned (NFC). We used a stable isotope mixing model to estimate the proportional contribution of natural foods (plants and animals) versus human food in the diets of FC bears. We then used results from both analyses to evaluate proactive (population-level) and reactive (individual-level) human–bear management, and discussed new metrics to evaluate the overall human–bear management program in Yosemite. Our results indicated that 19 out of 145 (13%) unknown bears sampled from 2005 to 2007 were food-conditioned. The proportion of human food in the diets of known FC bears likely declined from 2001–2003 to 2005–2007, suggesting proactive management was successful in reducing the amount of human food available to bears. In contrast, reactive management was not successful in changing the management status of known FC bears to NFC bears, or in reducing the contribution of human food to the diets of FC bears. Nine known FC bears were recaptured on 14 occasions from 2001 to 2007; all bears were classified as FC during subsequent recaptures, and human–bear management did not reduce the amount of human food in the diets of FC bears. Based on our results, we suggest Yosemite continue implementing proactive human–bear management, reevaluate reactive management, and consider removing problem bears (those involved in repeated bear incidents) from the population.

  17. Human impacts on bear habitat use

    Science.gov (United States)

    Mattson, David J.

    1990-01-01

    : Human effects on bear habitat use are mediated through food biomass changes, bear tolerance of humans and their impacts, and human tolerance of bears. Large-scale changes in bear food biomass have been caused by conversion of wildlands and waterways to intensive human use, and by the introduction of exotic pathogens. Bears consume virtually all human foods that have been established in former wildlands, but bear use has been limited by access. Air pollution has also affected bear food biomass on a small scale and is likely to have major future impacts on bear habitat through climatic warming. Major changes in disturbance cycles and landscape mosaics wrought by humans have further altered temporal and spatial pulses of bear food production. These changes have brought short-term benefits in places, but have also added long-term stresses to most bear populations. Although bears tend to avoid humans, they will also use exotic and native foods in close proximity to humans. Subadult males and adult females are more often impelled to forage closer to humans because of their energetic predicament and because more secure sites are often preempted by adult males. Although male bears are typically responsible for most livestock predation, adult females and subadult males are more likely to be habituated to humans because they tend to forage closer to humans. Elimination of human-habituated bears predictably reduces effective carrying capacity and is more likely to be a factor in preserving bear populations where humans are present in moderate-to-high densities. If humans desire to preserve viable bear populations, they will either have to accept increased risk of injury associated with preserving habituated animals, or continue to crop habituated bears while at the same time preserving large tracts of wildlands free from significant human intrusion.

  18. Thin film superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.

    1995-12-26

    A superconductor magnetic bearing includes a shaft (10) that is subject to a load (L) and rotatable around an axis of rotation, a magnet (12) mounted to the shaft, and a stator (14) in proximity to the shaft. The stator (14) has a superconductor thin film assembly (16) positioned to interact with the magnet (12) to produce a levitation force on the shaft (10) that supports the load (L). The thin film assembly (16) includes at least two superconductor thin films (18) and at least one substrate (20). Each thin film (18) is positioned on a substrate (20) and all the thin films are positioned such that an applied magnetic field from the magnet (12) passes through all the thin films. A similar bearing in which the thin film assembly (16) is mounted on the shaft (10) and the magnet (12) is part of the stator (14) also can be constructed.

  19. Fractal analysis of polar bear hairs

    Directory of Open Access Journals (Sweden)

    Wang Qing-Li

    2015-01-01

    Full Text Available Hairs of a polar bear (Ursus maritimus are of superior properties such as the excellent thermal protection. Why do polar bears can resist such cold environment? The paper concludes that its fractal porosity plays an important role, and its fractal dimensions are very close to the golden mean, 1.618, revealing the possible optimal structure of polar bear hair.

  20. Cool Polar Bears: Dabbing on the Texture

    Science.gov (United States)

    O'Connell, Jean

    2011-01-01

    In this article, the author describes how her second-graders created their cool polar bears. The students used the elements of shape and texture to create the bears. They used Monet's technique of dabbing paint so as to give the bear some texture on his fur.

  1. Foil bearing lubrication theory including compressibility effects

    Science.gov (United States)

    Gorla, Rama Subba Reddy; Catalano, Daniel A.

    1987-01-01

    An analysis is presented to determine the film thickness in a foil bearing. Using the Reynolds equation and including the compressibility effects of the gas, an equation was developed applicable to the film thickness in a foil bearing. The bearing was divided into three regions, namely, the entrance region, middle region and exit region. Solutions are obtained for the film thickness in each region.

  2. Teaching American History with Teddy's Bear.

    Science.gov (United States)

    Forman-Brunell, Miriam

    2001-01-01

    Discusses the origins of "Teddy's bear," tracing back to a cartoon published in 1902. States that Teddy's bear can shed light on U.S. culture and society. Focuses on the role of Teddy's bear as a symbol of conservationism, an embodiment of male dominance and female nurturance, and a manifestation of white racial supremacy. (CMK)

  3. Field metabolic rate and PCB adipose tissue deposition efficiency in East Greenland polar bears derived from contaminant monitoring data.

    Science.gov (United States)

    Pavlova, Viola; Nabe-Nielsen, Jacob; Dietz, Rune; Svenning, Jens-Christian; Vorkamp, Katrin; Rigét, Frank Farsø; Sonne, Christian; Letcher, Robert J; Grimm, Volker

    2014-01-01

    Climate change will increasingly affect the natural habitat and diet of polar bears (Ursus maritimus). Understanding the energetic needs of polar bears is therefore important. We developed a theoretical method for estimating polar bear food consumption based on using the highly recalcitrant polychlorinated biphenyl (PCB) congener, 2,2',4,4',55-hexaCB (CB153) in bear adipose tissue as an indicator of food intake. By comparing the CB153 tissue concentrations in wild polar bears with estimates from a purposely designed individual-based model, we identified the possible combinations of field metabolic rates (FMR) and CB153 deposition efficiencies in East Greenland polar bears. Our simulations indicate that if 30% of the CB153 consumed by polar bear individuals were deposited into their adipose tissue, the corresponding FMR would be only two times the basal metabolic rate. In contrast, if the modelled CB153 deposition efficiency were 10%, adult polar bears would require six times more energy than that needed to cover basal metabolism. This is considerably higher than what has been assumed for polar bears in previous studies though it is similar to FMRs found in other marine mammals. An implication of this result is that even relatively small reductions in future feeding opportunities could impact the survival of East Greenland polar bears.

  4. Field metabolic rate and PCB adipose tissue deposition efficiency in East Greenland polar bears derived from contaminant monitoring data.

    Directory of Open Access Journals (Sweden)

    Viola Pavlova

    Full Text Available Climate change will increasingly affect the natural habitat and diet of polar bears (Ursus maritimus. Understanding the energetic needs of polar bears is therefore important. We developed a theoretical method for estimating polar bear food consumption based on using the highly recalcitrant polychlorinated biphenyl (PCB congener, 2,2',4,4',55-hexaCB (CB153 in bear adipose tissue as an indicator of food intake. By comparing the CB153 tissue concentrations in wild polar bears with estimates from a purposely designed individual-based model, we identified the possible combinations of field metabolic rates (FMR and CB153 deposition efficiencies in East Greenland polar bears. Our simulations indicate that if 30% of the CB153 consumed by polar bear individuals were deposited into their adipose tissue, the corresponding FMR would be only two times the basal metabolic rate. In contrast, if the modelled CB153 deposition efficiency were 10%, adult polar bears would require six times more energy than that needed to cover basal metabolism. This is considerably higher than what has been assumed for polar bears in previous studies though it is similar to FMRs found in other marine mammals. An implication of this result is that even relatively small reductions in future feeding opportunities could impact the survival of East Greenland polar bears.

  5. Effects of roads on habitat quality for bears in the southern Appalachians: A long-term study

    Science.gov (United States)

    Reynolds-Hogland, M. J.; Mitchell, M.S.

    2007-01-01

    We tested the hypothesis that gravel roads, not paved roads, had the largest negative effect on habitat quality for a population of American black bears (Ursus americanus) that lived in a protected area, where vehicle collision was a relatively minimal source of mortality. We also evaluated whether road use by bears differed by sex or age and whether annual variation in hard mast productivity affected the way bears used areas near roads. In addition, we tested previous findings regarding the spatial extent to which roads affected bear behavior negatively. Using summer and fall home ranges for 118 black bears living in the Pisgah Bear Sanctuary in western North Carolina during 1981-2001, we estimated both home-range-scale (2nd-order) and within-home-range-scale (3rd-order) selection for areas within 250, 500, 800, and 1,600 m of paved and gravel roads. All bears avoided areas near gravel roads more than they avoided areas near paved roads during summer and fall for 2nd-order selection and during summer for 3rd-order selection. During fall, only adult females avoided areas near gravel roads more than they avoided areas near paved roads for 3rd-order selection. We found a positive relationship between use of roads by adults and annual variability in hard mast productivity. Overall, bears avoided areas within 800 m of gravel roads. Future research should determine whether avoidance of gravel roads by bears affects bear survival. ?? 2007 American Society of Mammalogists.

  6. Solid Lubricated Rolling Element Bearings

    Science.gov (United States)

    1979-02-15

    program named SHABERTH (SHAft BEaring THermal, see References IZ and 13). Although this program is only quasi-dynamic, its credibility has been examined...in the light of experimental evidence and found to exhibit reasonably good correlation between theory and practice of fluid lubrication. () SHABERTH ...particular material selection or devel- opment. It is encouraging that SHABERTH , in spite of its quasi-dynamic - nature, has seen extensive use over a period

  7. Government Districts, Other - MDC_CommissionDistrict2001

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Polygon feature class representing the Redistricting Commission Plan 11-15, adopted November 15, 2001. This Commission District Boundary layer becomes effective...

  8. Scaling laws for radial foil bearings

    Science.gov (United States)

    Honavara Prasad, Srikanth

    The effects of fluid pressurization, structural deformation of the compliant members and heat generation in foil bearings make the design and analysis of foil bearings very complicated. The complex fluid-structural-thermal interactions in foil bearings also make modeling efforts challenging because these phenomena are governed by highly non-linear partial differential equations. Consequently, comparison of various bearing designs require detailed calculation of the flow fields (velocities, pressures), bump deflections (structural compliance) and heat transfer phenomena (viscous dissipation in the fluid, frictional heating, temperature profile etc.,) resulting in extensive computational effort (time/hardware). To obviate rigorous computations and aid in feasibility assessments of foil bearings of various sizes, NASA developed the "rule of thumb" design guidelines for estimation of journal bearing load capacity. The guidelines are based on extensive experimental data. The goal of the current work is the development of scaling laws for radial foil bearings to establish an analytical "rule of thumb" for bearing clearance and bump stiffness. The use of scale invariant Reynolds equation and experimentally observed NASA "rule of thumb" yield scale factors which can be deduced from first principles. Power-law relationships between: a. Bearing clearance and bearing radius, and b. bump stiffness and bearing radius, are obtained. The clearance and bump stiffness values obtained from scaling laws are used as inputs for Orbit simulation to study various cases. As the clearance of the bearing reaches the dimensions of the material surface roughness, asperity contact breaks the fluid film which results in wear. Similarly, as the rotor diameter increases (requiring larger bearing diameters), the load capacity of the fluid film should increase to prevent dry rubbing. This imposes limits on the size of the rotor diameter and consequently bearing diameter. Therefore, this thesis aims

  9. Cannibalism and predation on black bears by grizzly bears in the Yellowstone ecosystem, 1975-1990

    Science.gov (United States)

    Mattson, D.J.; Knight, R.R.; Blanchard, B.M.

    1992-01-01

    We documented one instance of an adult male grizzly bear preying upon a black bear and four instances where circumstantial evidence suggested that grizzly bears (two cubs-of-the-year, one yearling female that was injured, and one adult male) had been preyed upon by conspecifics. We also examined feces of grizzly bears for bear remains. Remains of bears tended to be more common in spring feces and did not differ in frequency between early and late years of the study. Our observations generally support existing hypotheses concerning cannibalism among bears.

  10. Black bear population and connectivity in the Sky Islands of Mexico and the United States

    Science.gov (United States)

    N. E. Lara-Diaz; C. A. Lopez-Gonzalez; H. Coronel-Arellano; A. Gonzalez-Bernal

    2013-01-01

    The Sky Island region is a mountainous region surrounded by grasslands, deserts and intermountain valleys, located between Mexico and the United States. However, different land management and human impact can have an effect on its wildlife populations. Currently, the border wall poses an immediate threat to the survival of black bears (Ursus americanus), considered an...

  11. Computing Thermal Performances Of Shafts And Bearings

    Science.gov (United States)

    Woods, Claudia M.

    1992-01-01

    SHABERTH computer program developed to predict steady-state and transient thermal performance of multi-bearing shaft system operating with either wet or dry friction. Calculates loads, torques, temperatures, and fatigue lives for ball and/or roller bearings on single shaft. Enables study of many causes of instabilities in bearings. Also provides for analysis of reaction of system to termination of supply of lubricant to bearings and other lubricated mechanical elements. Valuable software tool in design and analysis of shaft bearing systems. Written in FORTRAN IV.

  12. Heuristic explanation of journal bearing instability

    Science.gov (United States)

    Crandall, S. H.

    1982-01-01

    A fluid-filled journal bearing is viewed as a powerful pump circulating fluid around the annular space between the journal and the bearing. A small whirling motion of the journal generates a wave of thickness variation progressing around the channel. The hypothesis that the fluid flow drives the whirl whenever the mean of the pumped fluid velocity is greater than the peripheral speed of the thickness variation wave is discussed and compared with other simple explanations of journal bearing instability. It is shown that for non-cavitation long bearings the hypothesis predicts instability onset correctly for unloaded bearings but gradually overpredicts the onset speed as the load is increased.

  13. [Advances in studies on bear bile powder].

    Science.gov (United States)

    Zhou, Chao-fan; Gao, Guo-jian; Liu, Ying

    2015-04-01

    In this paper, a detailed analysis was made on relevant literatures about bear bile powder in terms of chemical component, pharmacological effect and clinical efficacy, indicating bear bile powder's significant pharmacological effects and clinical application in treating various diseases. Due to the complex composition, bear bile powder is relatively toxic. Therefore, efforts shall be made to study bear bile powder's pharmacological effects, clinical application, chemical composition and toxic side-effects, with the aim to provide a scientific basis for widespread reasonable clinical application of bear bile powder.

  14. Extirpations of grizzly bears in the contiguous United States of America, 1850-2000

    Science.gov (United States)

    Mattson, David J.; Merrill, Troy

    2002-01-01

    We investigated factors associated with the distribution of grizzly bears (Ursus arctos horribilis) in 1850 and their extirpation during 1850–1920 and 1920–1970 in the contiguous United States. We used autologistic regression to describe relations between grizzly bear range in 1850, 1920, and 1970 and potential explanatory factors specified for a comprehensive grid of cells, each 900 km2 in size. We also related persistence, 1920–1970, to range size and shape. Grizzly bear range in 1850 was positively related to occurrence in mountainous ecoregions and the ranges of oaks (Quercus spp.), piñon pines (Pinus edulis and P. monophylla), whitebark pine (P. albicaulis), and bison (Bos bison) and negatively related to occurrence in prairie and hot desert ecoregions. Relations with salmon (Oncorynchus spp.) range and human factors were complex. Persistence of grizzly bear range, 1850–1970, was positively related to occurrence in the Rocky Mountains, whitebark pine range, and local size of grizzly bear range at the beginning of each period, and negatively related to number of humans and the ranges of bison, salmon, and piñon pines. We speculate that foods affected persistence primarily by influencing the frequency of contact between humans and bears. With respect to current conservation, grizzly bears survived from 1920 to 1970 most often where ranges at the beginning of this period were either larger than 20,000 km2 or larger than 7,000 km2 but with a ratio of perimeter to area of grizzly bear range would be as extensive as it is now. Although grizzly bear range in the Yellowstone region is currently the most robust of any to potential future increases in human lethality, bears in this region are threatened by the loss of whitebark pine.

  15. Idiosyncratic responses of grizzly bear habitat to climate change based on projected food resource changes.

    Science.gov (United States)

    Roberts, David R; Nielsen, Scott E; Stenhouse, Gordon B

    2014-07-01

    Climate change vulnerability assessments for species of conservation concern often use species distribution and ecological niche modeling to project changes in habitat. One of many assumptions of these approaches is that food web dependencies are consistent in time and environmental space. Species at higher trophic levels that rely on the availability of species at lower trophic levels as food may be sensitive to extinction cascades initiated by changes in the habitat of key food resources. Here we assess climate change vulnerability for Ursus arctos (grizzly bears) in the southern Canadian Rocky Mountains using projected changes to 17 of the most commonly consumed plant food items. We used presence-absence information from 7088 field plots to estimate ecological niches and to project changes in future distributions of each species. Model projections indicated idiosyncratic responses among food items. Many food items persisted or even increased, although several species were found to be vulnerable based on declines or geographic shifts in suitable habitat. These included Hedysarum alpinum (alpine sweet vetch), a critical spring and autumn root-digging resource when little else is available. Potential habitat loss was also identified for three fruiting species of lower importance to bears: Empetrum nigrum (crowberry), Vaccinium scoparium (grouseberry), and Fragaria virginiana (strawberry). A general trend towards uphill migration of bear foods may result in higher vulnerability to bear populations at low elevations, which are also those that are most likely to have human-bear conflict problems. Regardless, a wide diet breadth of grizzly bears, as well as wide environmental niches of most food items, make climate change a much lower threat to grizzly bears than other bear species such as polar bears and panda bears. We cannot exclude, however, future alterations in human behavior and land use resulting from climate change that may reduce survival rates.

  16. Ovulation induction and artificial insemination of a captive polar bear (Ursus maritimus) using fresh semen.

    Science.gov (United States)

    Curry, Erin; Wyatt, Jeff; Sorel, Lawrence J; MacKinnon, Katherine M; Roth, Terri L

    2014-09-01

    In 2008, polar bears were listed as a species threatened with extinction by the U.S. Endangered Species Act. Unfortunately, reproductive success has been poor despite breeding recommendations for almost every reproductively viable bear by the Species Survival Plan. Assisted reproductive technologies could complement breeding efforts by overcoming the challenges of behavioral incompatibilities and deficiencies, facilitating genetic management and increasing cub production. The goal of this study was to artificially inseminate a female polar bear after inducing ovarian activity and ovulation with exogenous hormones (equine chorionic gonadotropin and porcine luteinizing hormone). Fresh semen collected from an adult male via electroejaculation/urethral catheterization was used for the insemination. Fecal steroid monitoring indicated that the female ovulated following the exogenous hormone treatment. Progestin concentrations increased in late summer, at the time implantation was expected to occur; however, no cubs were produced. To the authors' knowledge, this is the first report of ovulation induction and artificial insemination in a polar bear.

  17. Effects of climate warming on polar bears: a review of the evidence.

    Science.gov (United States)

    Stirling, Ian; Derocher, Andrew E

    2012-09-01

    Climate warming is causing unidirectional changes to annual patterns of sea ice distribution, structure, and freeze-up. We summarize evidence that documents how loss of sea ice, the primary habitat of polar bears (Ursus maritimus), negatively affects their long-term survival. To maintain viable subpopulations, polar bears depend on sea ice as a platform from which to hunt seals for long enough each year to accumulate sufficient energy (fat) to survive periods when seals are unavailable. Less time to access to prey, because of progressively earlier breakup in spring, when newly weaned ringed seal (Pusa hispida) young are available, results in longer periods of fasting, lower body condition, decreased access to denning areas, fewer and smaller cubs, lower survival of cubs as well as bears of other age classes and, finally, subpopulation decline toward eventual extirpation. The chronology of climate-driven changes will vary between subpopulations, with quantifiable negative effects being documented first in the more southerly subpopulations, such as those in Hudson Bay or the southern Beaufort Sea. As the bears' body condition declines, more seek alternate food resources so the frequency of conflicts between bears and humans increases. In the most northerly areas, thick multiyear ice, through which little light penetrates to stimulate biological growth on the underside, will be replaced by annual ice, which facilitates greater productivity and may create habitat more favorable to polar bears over continental shelf areas in the short term. If the climate continues to warm and eliminate sea ice as predicted, polar bears will largely disappear from the southern portions of their range by mid-century. They may persist in the northern Canadian Arctic Islands and northern Greenland for the foreseeable future, but their long-term viability, with a much reduced global population size in a remnant of their former range, is uncertain. © 2012 Blackwell Publishing Ltd.

  18. Is Gender Mainstreamed? : A study of the European Commission's use of gender mainstreaming in development policies

    OpenAIRE

    Karlsson, Sophie

    2016-01-01

    The EU has long expressed a will to be a normative power and to externally promote the values it views as important. Seeing as the EU collectively is the largest donor of foreign aid in the world, development policies are a perfect platform for doing this. One value that has gained ground in recent years is the notion of gender equality. Bearing this in mind, this thesis explores how the EU’s largest institutional donor of foreign aid, the European Commission, has chosen to promote the value ...

  19. Chromatographic (TLC) differentiation of grizzly bear and black bear scats

    Science.gov (United States)

    Picton, Harold D.; Kendall, Katherine C.

    1994-01-01

    While past work concluded that thin-layer chromatography (TLC) was inadequate for the separation of grizzly (Ursus arctos horribilis) and black bear (U. americanus) scats, our study found differences adequate for species separation. A key was constructed using 19 of 40 data points recorded on each(N)=356 profiles of 178) know-species scat. Accuracy was best for late summer scats (94%). Methods for specimen preparation, analysis, and reading the TLC profiles are discussed. Factors involved in scat variation were tested.

  20. 78 FR 23899 - Codex Alimentarius Commission: Meeting of the Codex Alimentarius Commission

    Science.gov (United States)

    2013-04-23

    ... referred to the Commission by Codex Committees and Task Forces Strategic Planning of the Codex Alimentarius Commission (a) General Implementation Status (b) Draft Codex Strategic Plan 2014-2019 Financial and Budgetary... Listserv, a free electronic mail subscription service for industry, trade groups, consumer interest groups...

  1. 77 FR 30993 - Codex Alimentarius Commission: Meeting of the Codex Alimentarius Commission

    Science.gov (United States)

    2012-05-24

    ... Commission by Codex Committees and Task Forces Strategic Planning of the Codex Alimentarius Commission (a) General Implementation Status (b) Draft Codex Strategic Plan 2014-2019 Matters Arising from FAO and WHO (a... for industry, trade groups, consumer interest groups, health professionals, and other individuals who...

  2. 78 FR 57818 - Commission Participation and Commission Employee Involvement in Voluntary Standards Activities

    Science.gov (United States)

    2013-09-20

    ... leadership positions in voluntary standard development groups. The proposed rule would remove these restrictions and would allow Commission employees to participate as voting members and to accept leadership... provide draft language for a voluntary standard. The Commission's involvement and staff's participation in...

  3. Federal Energy Regulatory Commission`s fiscal year 1996 financial statement audit

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-14

    This report presents the results of the independent certified public accountants` audit of the Federal Energy Regulatory Commission`s (FERC) financial statements as of September 30, 1996. The auditors have expressed an unqualified opinion on the 1996 statement of financial position and the related statements of operations and changes in net position.

  4. European commission research activities on iodine

    Energy Technology Data Exchange (ETDEWEB)

    Loggia, E. della [European Commission, Brussels (Belgium)

    1996-12-01

    The research on iodine, as on other important fission products which would be released during a severe accident, carried out directly or organized by the European Commission stems from the Euratom Treaty, namely from Chapter III of the treaty which deals with the protection of the health of the population against radiations and from Chapter I which deals with research. In this paper we do not consider the Commission radiological protection programme: we limit ourselves to the presentation of the research carried out on Iodine as part of the most recent source term studies within the framework Programmes as are called the research programme of the European Commission, usually valid for a 4 year periods. The research activities are carried out by the European Commission either directly through the Joint Research Centres (JRC) or indirectly through collaboration with research organizations of Member States. Concerning the iodine research carried out as Direct Action in the Joint Research Centres, are mentioned here the most relevant activities carried out in this field at the JRC of Ispra and Karlsruhe (TUI). As Indirect Action, we present here the results of some studies allocated by the European Commission to experts of research organizations of Member Countries, followed by a short description of the main results achieved by the Reinforced Concerted Action, within the III Framework Programme (1992-1995). At the end of the paper are described the research on iodine being carried out or proposed within the IV Framework Programme (1995-1998). Mention is also done of the Commission participation, relevant in terms of financial and human efforts, to the PHEBUS FP Project. (author) refs.

  5. Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears.

    Science.gov (United States)

    Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

    2015-03-01

    Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we present an analysis of data from a large panel of polar bear and brown bear genomes that includes brown bears from the ABC islands, the Alaskan mainland and Europe. Our results provide clear evidence that gene flow between the two species had a geographically wide impact, with polar bear DNA found within the genomes of brown bears living both on the ABC islands and in the Alaskan mainland. Intriguingly, while brown bear genomes contain up to 8.8% polar bear ancestry, polar bear genomes appear to be devoid of brown bear ancestry, suggesting the presence of a barrier to gene flow in that direction. © 2014 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd.

  6. Development and Evaluation of Titanium Spacesuit Bearings

    Science.gov (United States)

    Rhodes, Richard; Battisti, Brian; Ytuarte, Raymond, Jr.; Schultz, Bradley

    2016-01-01

    The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z-series of spacesuits, designed with the intent of meeting a wide variety of exploration mission objectives, including human exploration of the Martian surface. Incorporating titanium bearings into the Z-series space suit architecture allows us to reduce mass by an estimated 23 lbs per suit system compared to the previously used stainless steel bearing race designs, without compromising suit functionality. There are two obstacles to overcome when using titanium for a bearing race- 1) titanium is flammable when exposed to the oxygen wetted environment inside the space suit and 2) titanium's poor wear properties are often challenging to overcome in tribology applications. In order to evaluate the ignitability of a titanium space suit bearing, a series of tests were conducted at White Sands Test Facility (WSTF) that introduced the bearings to an extreme test profile, with multiple failures imbedded into the test bearings. The testing showed no signs of ignition in the most extreme test cases; however, substantial wear of the bearing races was observed. In order to design a bearing that can last an entire exploration mission (approx. 3 years), design parameters for maximum contact stress need to be identified. To identify these design parameters, bearing test rigs were developed that allow for the quick evaluation of various bearing ball loads, ball diameters, lubricants, and surface treatments. This test data will allow designers to minimize the titanium bearing mass for a specific material and lubricant combination and design around a cycle life requirement for an exploration mission. This paper reviews the current research and testing that has been performed on titanium bearing races to evaluate the use of such materials in an enriched oxygen environment and to optimize the bearing assembly mass and tribological properties to accommodate for the high bearing cycle life for an

  7. 76 FR 31307 - Commission of Fine Arts; Notice of Meeting

    Science.gov (United States)

    2011-05-31

    ... From the Federal Register Online via the Government Publishing Office COMMISSION OF FINE ARTS Commission of Fine Arts; Notice of Meeting The next meeting of the U.S. Commission of Fine Arts is scheduled... oral statements should be addressed to Thomas Luebke, Secretary, U.S. Commission of Fine Arts, at the...

  8. 76 FR 71449 - Reporting Line for the Commission's Ethics Counsel

    Science.gov (United States)

    2011-11-18

    ... 200 Reporting Line for the Commission's Ethics Counsel AGENCY: Securities and Exchange Commission... rules to reflect that the Commission's Office of the Ethics Counsel is now a stand-alone Office of the Commission and that the head of the Office, the Ethics Counsel, reports directly to the Chairman of the...

  9. 22 CFR 130.5 - Fee or commission.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Fee or commission. 130.5 Section 130.5 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS POLITICAL CONTRIBUTIONS, FEES AND COMMISSIONS § 130.5 Fee or commission. (a) Fee or commission means, except as provided in paragraph (b) of this section, any loan, gift,...

  10. 29 CFR 2200.93 - Briefs before the Commission.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Briefs before the Commission. 2200.93 Section 2200.93 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION RULES OF PROCEDURE Posthearing Procedures § 2200.93 Briefs before the Commission. (a) Requests for briefs. The Commission ordinarily will request the parties...

  11. 28 CFR 0.124 - United States Parole Commission.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false United States Parole Commission. 0.124 Section 0.124 Judicial Administration DEPARTMENT OF JUSTICE ORGANIZATION OF THE DEPARTMENT OF JUSTICE United States Parole Commission § 0.124 United States Parole Commission. The U.S. Parole Commission is composed of nine Commissioners of whom one is...

  12. National Statistical Commission and Indian Official Statistics*

    Indian Academy of Sciences (India)

    IAS Admin

    Commission also stresses the importance of setting up of a. Methodological Study Unit to regularly undertake studies for bringing in improvements in the survey methodologies. The importance of a sound official statistical system in any country is well understood. Efficient governance depends largely on timely, accurate and ...

  13. Commissioning for the European XFEL facility

    Science.gov (United States)

    Nölle, D.

    2017-06-01

    The European XFEL is a 4th generation light source based on the Self Amplified Spontaneous Emission (SASE) FreeElectron-Laser concept. It is currently being commissioned in North- Germany. The core installation is a 17.5 GeV superconducting accelerator driving 3 SASE lines with photon energies from 1 to beyond 20 keV range with a maximum of 27.000 pulses per second. The international facility is organized as a limited liability company with shareholders from the contributing countries. DESY has taken over the leadership of the accelerator construction consortium, and will be in charge of the operation of the accelerator complex. The facility was set up with contributions from the 11 shareholder countries, either being hardware systems and/or staff or cash contributions. The construction is almost complete, and the commissioning phase has started by the end of 2015. This contribution will report the status of the accelerator complex with emphasis on the commissioning of the accelerator and an outlook to the commissioning of the SASE 1 FEL line.

  14. Commissioning of the MICE RF System

    CERN Document Server

    Moss, A.; Stanley, T.; White, C.; Ronald, K.; Whyte, C.G.; Dick, A.J.; Speirs, D.C.; Alsari, S.

    2014-01-01

    The Muon Ionisation Cooling Experiment (MICE) is being constructed at Rutherford Appleton Laboratory in the UK. The muon beam will be cooled using multiple hydrogen absorbers then reaccelerated using an RF cavity system operating at 201MHz. This paper describes recent progress in commissioning the amplifier systems at their design operation conditions, installation and operation as part of the MICE project.

  15. Commission on Traditional Leadership: Disputes and Claims

    African Journals Online (AJOL)

    This article examines the practices of the Commission on Traditional Leadership: Disputes and Claims, set up under the Framework Act of 2003 to 'cleanse' the institution of traditional leadership by ridding it of the illegitimate traditional leaders installed during the colonial and homeland eras. Close analysis of the ...

  16. Securities and Exchange Commission Semiannual Regulatory Agenda

    Science.gov (United States)

    2010-04-26

    ... Contact: Mark W. Green, Division of Corporation Finance, Securities and Exchange Commission, 100 F Street... CORPORATION FINANCE--Proposed Rule Stage Regulation Sequence Title Identifier Number Number 418 Voluntary... CORPORATION FINANCE--Final Rule Stage Regulation Sequence Title Identifier Number Number 421 Proxy...

  17. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    D. Acosta

    Point 5 commissioning activities Since the last CMS week there has been little global commissioning activities: the first mid week global run aiming to assess the status of the hardware and DAQ software after the winter maintenance and developments has taken place two weeks ago involving all subdetectors but tracker and pixel whose hardware is still being actively worked on. The local commissioning restarted once the cooling became available again the third week of January. Below are detailed the main activities which have taken place so far. DAQ The activity of the central DAQ group during pause of global runs was focused on various items. The commissioning of the 900 new PCs which will be used to run the HLT processes has been almost completed. It is planned to use these PCs in the first global run at the start of March. In addition the location of various server PCs which host essential functionalities to get the private ".cms" network going, has been re-organized to allow to implemen...

  18. 10 CFR 110.40 - Commission review.

    Science.gov (United States)

    2010-01-01

    ... plutonium, except for exports of source material or low-enriched uranium to EURATOM or Japan for enrichment up to 5 percent in the isotope uranium-235, and those categories of exports which the Commission has... kilogram of high-enriched uranium, plutonium or U-233. (3) Nuclear grade graphite for nuclear end use. (4...

  19. 17 CFR 200.63 - Commission opinions.

    Science.gov (United States)

    2010-04-01

    ... Section 200.63 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION ORGANIZATION; CONDUCT... understanding of the matter before him, avoids the suspicion of arbitrary conclusion, promotes confidence in his... should recall that he is not a repository of arbitrary power, but is acting on behalf of the public under...

  20. Boston Water & Sewer Commission (BWSC) | Stormwater ...

    Science.gov (United States)

    2017-04-10

    The Boston Water and Sewer Commission (BWSC) was issued National Pollutant Discharge Elimination System (NPDES) Permit MAS010001, which became effective on October 29, 1999, authorizing stormwater and allowable non-stormwater discharges from its municipal separate storm sewer system (MS4).

  1. Potential Benefits of Commissioning California Homes

    Energy Technology Data Exchange (ETDEWEB)

    Matson, Nance; Wray, Craig; Walker, Iain; Sherman, Max

    2002-01-01

    Commissioning California's houses can result in better performing systems and houses. In turn, this will result in more efficient use of energy, carbon emission reductions, and improved occupant comfort. In particular, commissioning houses can save a significant amount of HVAC-related energy (15 to 30% in existing houses, 10 to 20% in new conventional houses, and up to 8% in advanced energy efficiency houses). The process that we considered includes corrective measures that could be implemented together during construction or during a single site visit (e.g., air tightening, duct sealing, and refrigerant and air handler airflow corrections in a new or existing house). Taking advantage of additional, more complex opportunities (e.g., installing new windows in an existing house, replacing the heating and air conditioning system in a new or existing house) can result in additional HVAC-related energy savings (60 to 75% in existing houses, and 50 to 60% in new conventional houses). The commissioning-related system and house performance improvements and energy savings translate to additional benefits throughout California and beyond. By applying commissioning principles to their work, the building community (builders and contractors) benefit from reduced callbacks and lower warranty costs. HERS raters and inspectors will have access to an expanded market sector. As the commissioning process rectifies construction defects and code problems, building code officials benefit from better compliance with codes. The utilities benefit from reduced peak demand, which can translate into lower energy acquisition costs. As houses perform closer to expectations, governmental bodies (e.g., the California Energy Commission and the Air Resources Board) benefit from greater assurance that actual energy consumption and carbon emissions are closer to the levels mandated in codes and standards, resulting in better achievement of state energy conservation and environmental goals

  2. Survey on the virtual commissioning of manufacturing systems

    OpenAIRE

    Lee, Chi G.; Park, Sang C.

    2014-01-01

    This paper reviews and identifies issues in the application of virtual commissioning technology for automated manufacturing systems. While the real commissioning of a manufacturing system involves a real plant system and a real controller, the virtual commissioning deals with a virtual plant model and a real controller. The expected benefits of virtual commissioning are the reduction of debugging and correction efforts during the subsequent real commissioning stage. However, it requires a vir...

  3. The Royal Commission on Declining School Enrolments in Ontario: A Bulletin on the Commission and Its Studies in Curriculum.

    Science.gov (United States)

    Connelly, F. M.; And Others

    1979-01-01

    Recounts the mandate and activities of a commission established in Ontario to determine why school enrollments were declining. Topics discussed include the organizational structure of the commission, areas identified by the commission for investigation (demography, finance, school plants, curriculum), and issues identified by the commission for…

  4. Bearing Health Assessment Based on Chaotic Characteristics

    Directory of Open Access Journals (Sweden)

    Chen Lu

    2013-01-01

    Full Text Available Vibration signals extracted from rotating parts of machinery carry a lot of useful information about the condition of operating machine. Due to the strong non-linear, complex and non-stationary characteristics of vibration signals from working bearings, an accurate and reliable health assessment method for bearing is necessary. This paper proposes to utilize the selected chaotic characteristics of vibration signal for health assessment of a bearing by using self-organizing map (SOM. Both Grassberger-Procaccia algorithm and Takens' theory are employed to calculate the characteristic vector which includes three chaotic characteristics, such as correlation dimension, largest Lyapunov exponent and Kolmogorov entropy. After that, SOM is used to map the three corresponding characteristics into a confidence value (CV which represents the health state of the bearing. Finally, a case study based on vibration datasets of a group of testing bearings was conducted to demonstrate that the proposed method can reliably assess the health state of bearing.

  5. Effects of climate change on polar bears.

    Science.gov (United States)

    Wiig, Øystein; Aars, Jon; Born, Erik W

    2008-01-01

    In this article, we review the effects on polar bears of global warming that have already been observed, and try to evaluate what may happen to the polar bears in the future. Many researchers have predicted a wide range of impacts of climate change on polar bear demography and conditions. A predicted major reduction in sea ice habitat will reduce the availability of ice associated seals, the main prey of polar bears, and a loss and fragmentation of polar bear habitat will ultimately lead to large future reductions in most subpopulations. It is likely that polar bears will be lost from many areas where they are common today and also that the total population will change into a few more distinctly isolated populations.

  6. Retreat and extinction of the Late Pleistocene cave bear (Ursus spelaeus sensu lato).

    Science.gov (United States)

    Baca, Mateusz; Popović, Danijela; Stefaniak, Krzysztof; Marciszak, Adrian; Urbanowski, Mikołaj; Nadachowski, Adam; Mackiewicz, Paweł

    2016-12-01

    The cave bear (Ursus spelaeus sensu lato) is a typical representative of Pleistocene megafauna which became extinct at the end of the Last Glacial. Detailed knowledge of cave bear extinction could explain this spectacular ecological transformation. The paper provides a report on the youngest remains of the cave bear dated to 20,930 ± 140 (14)C years before present (BP). Ancient DNA analyses proved its affiliation to the Ursus ingressus haplotype. Using this record and 205 other dates, we determined, following eight approaches, the extinction time of this mammal at 26,100-24,300 cal. years BP. The time is only slightly earlier, i.e. 27,000-26,100 cal. years BP, when young dates without associated collagen data are excluded. The demise of cave bear falls within the coldest phase of the last glacial period, Greenland Stadial 3. This finding and the significant decrease in the cave bear records with cooling indicate that the drastic climatic changes were responsible for its extinction. Climate deterioration lowered vegetation productivity, on which the cave bear strongly depended as a strict herbivore. The distribution of the last cave bear records in Europe suggests that this animal was vanishing by fragmentation into subpopulations occupying small habitats. One of them was the Kraków-Częstochowa Upland in Poland, where we discovered the latest record of the cave bear and also two other, younger than 25,000 (14)C years BP. The relatively long survival of this bear in karst regions may result from suitable microclimate and continuous access to water provided by deep aquifers, indicating a refugial role of such regions in the Pleistocene for many species.

  7. Retreat and extinction of the Late Pleistocene cave bear ( Ursus spelaeus sensu lato)

    Science.gov (United States)

    Baca, Mateusz; Popović, Danijela; Stefaniak, Krzysztof; Marciszak, Adrian; Urbanowski, Mikołaj; Nadachowski, Adam; Mackiewicz, Paweł

    2016-12-01

    The cave bear ( Ursus spelaeus sensu lato) is a typical representative of Pleistocene megafauna which became extinct at the end of the Last Glacial. Detailed knowledge of cave bear extinction could explain this spectacular ecological transformation. The paper provides a report on the youngest remains of the cave bear dated to 20,930 ± 140 14C years before present (BP). Ancient DNA analyses proved its affiliation to the Ursus ingressus haplotype. Using this record and 205 other dates, we determined, following eight approaches, the extinction time of this mammal at 26,100-24,300 cal. years BP. The time is only slightly earlier, i.e. 27,000-26,100 cal. years BP, when young dates without associated collagen data are excluded. The demise of cave bear falls within the coldest phase of the last glacial period, Greenland Stadial 3. This finding and the significant decrease in the cave bear records with cooling indicate that the drastic climatic changes were responsible for its extinction. Climate deterioration lowered vegetation productivity, on which the cave bear strongly depended as a strict herbivore. The distribution of the last cave bear records in Europe suggests that this animal was vanishing by fragmentation into subpopulations occupying small habitats. One of them was the Kraków-Częstochowa Upland in Poland, where we discovered the latest record of the cave bear and also two other, younger than 25,000 14C years BP. The relatively long survival of this bear in karst regions may result from suitable microclimate and continuous access to water provided by deep aquifers, indicating a refugial role of such regions in the Pleistocene for many species.

  8. Anthropogenic flank attack on polar bears: Interacting consequences of climate warming and pollutant exposure

    Directory of Open Access Journals (Sweden)

    Bjørn Munro Jenssen

    2015-02-01

    Full Text Available Polar bears (Ursus maritimus are subjected to several anthropogenic threats, climate warming and exposure to pollutants being two of these. For polar bears, one of the main effects of climate warming is limited access to prey, due to loss of their sea ice habitat. This will result in prolonged fasting periods and emaciation and condition related negative effects on survival and reproduction success. Prolonged fasting will result in increases of the tissue concentrations of persistent organic pollutants (POPs in polar bears, and thus increase the probability for POP levels to exceed threshold levels for effects on health, and thus on reproductive success and survival. There are clear potentials for interactions between impacts of climate warming and impacts of pollutant exposure on polar bears. It is likely that that fasting-induced increases of POPs will add to mortality rates and decrease reproductive success beyond effects caused by loss of habitat alone. However, there is a lack of studies that have addressed this. Thus, there is a need to focus on population effects of POP exposure in polar bears, and to consider such effects in relation to the effects of climate induced habitat loss.

  9. Are organohalogen contaminants a bears (Ursus maritimus)?

    DEFF Research Database (Denmark)

    Sonne, Christian; Dietz, Rune; Leifsson, PS

    2006-01-01

    Tissues of polar bears (Ursus maritimus) from East Greenland contain the highest concentrations of organohalogen contaminants (OHCs) among subpopulations of any mammalian species in the Arctic. Negative associations also have been found between OHC concentrations and bone mineral density and liver...... histology parameters for this subpopulation of polar bears. The present study examined the OHC concentrations and adverse effects on renal tissue for 75 polar bears collected during 1999 to 2002. Specific lesions were diffuse glomerular capillary wall thickening, mesangial glomerular deposits, tubular...

  10. Trends in Controllable Oil Film Bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    This work gives an overview about the theoretical and experimental achievements of mechatronics applied to oil film bearings, with the aim of: controlling the lateral vibration of flexible rotating shafts; modifying bearing dynamic characteristics, as stiffness and damping properties; increasing......" components and be applied to rotating machines with the goal of avoiding unexpected stops of plants, performing rotordynamic tests and identifying model parameters "on site". Emphasis is given to the controllable lubrication (active lubrication) applied to different types of oil film bearings, i...

  11. Teflon lubrication of liquid oxygen turbopump bearings

    Science.gov (United States)

    Naerheim, Y.; Stocker, P. J.

    1989-01-01

    Ball bearings with glass fiber reinforced Teflon ball retainers from hot-fired liquid oxygen turbopumps were analyzed by X-ray photoelectron spectroscopy to determine the extent of Teflon transfer and/or chemical reaction at the bearing surface. No Teflon, but metal fluorides could be found on the metal surface. This indicates that Teflon decomposes and reacts with the bearing steel to form fluorides. Hence, Teflon does not appear to function directly as a lubricant under these operating conditions.

  12. Powder-Metallurgical Bearings For Turbopumps

    Science.gov (United States)

    Bhat, B. N.; Humphries, T. S.; Thom, R. L.; Moxson, V.; Friedman, G. I.; Dolan, F. J.; Shipley, R. J.

    1993-01-01

    Bearings fabricated by powder metallurgy developed for use in machines subjected to extremes of temperature, rolling-contact cyclic stresses, and oxidizing or otherwise corrosive fluids. Bearings also extend operating lives of other machines in which bearings required to resist extreme thermal, mechanical, and chemical stresses. One alloy exhibiting outstanding properties was MRC-2001. Resistance to fatigue, stress corrosion cracking, and wear found superior to that of 440C stainless steel.

  13. Curriculum for Commissioning Energy Efficient Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Webster, Lia [Portland Energy Conservation, Inc., OR (United States)

    2012-12-27

    In July 2010, the U.S. Department of Energy (DOE) awarded funding to PECI to develop training curriculum in commercial energy auditing and building commissioning. This program was created in response to the high demand for auditing and commissioning services in the U.S. commercial buildings market and to bridge gaps and barriers in existing training programs. Obstacles addressed included: lack of focus on entry level candidates; prohibitive cost and time required for training; lack of hands-on training; trainings that focus on certifications & process overviews; and lack of comprehensive training. PECI organized several other industry players to create a co-funded project sponsored by DOE, PECI, New York State Energy and Research Development Authority (NYSERDA), California Energy Commission (CEC), Northwest Energy Efficiency Alliance (NEEA) and California Commissioning Collaborative (CCC). After awarded, PECI teamed with another DOE awardee, New Jersey Institute of Technology (NJIT), to work collaboratively to create one comprehensive program featuring two training tracks. NJIT’s Center for Building Knowledge is a research and training institute affiliated with the College of Architecture and Design, and provided e-learning and video enhancements. This project designed and developed two training programs with a comprehensive, energy-focused curriculum to prepare new entrants to become energy auditors or commissioning authorities (CxAs). The following are the key elements of the developed trainings, which is depicted graphically in Figure 1: • Online classes are self-paced, and can be completed anywhere, any time • Commissioning Authority track includes 3 online modules made up of 24 courses delivered in 104 individual lessons, followed by a 40 hour hands-on lab. Total time required is between 75 and 100 hours, depending on the pace of the independent learner. • Energy Auditor track includes 3 online modules made up of 18 courses delivered in 72 individual

  14. The winner in the race of bearing surface

    Directory of Open Access Journals (Sweden)

    Xiao-yang HU

    2011-08-01

    Full Text Available There are no absolute ’winners’ in this ’race of bearing surface’.Since the mechanical performance of the modern bearing surface used in total hip joint manufacture is satisfactory,it is necessary to take their advantage respectively and treat each patient independently.Patient satisfaction,quality of life,and radiographic analysis should also be considered.Specifically,high crosslinked UHMWPE cup articulating with CoCr alloy and the alternative of ceramic ball are surviving for almost thirty years because of their high wear resistance,no toxicity and comparably low cost.They are more suitable for the patients who are not very young and less active and ask for a relatively lower physical and financial condition of patients.For patients articulating with MOM,they benefit from larger sized heads and low wear and friction,which would produce more stability for more active patients.However,one should be aware of the metal ions released in serum as well as in urine.Therefore,MOM is not fit for patients who are pregnant or suffer from renal insufficiency etc.A random kidney function test should be performed before MOM surgery.Last but not least,the COC bearing surface has all the superiorities mentioned above but with a risk of fracture and a rarely audible squeaking.The fairly high cost makes it not a choice for everyone,but it could be a lifelong choice for younger patients with a lot of high impact activities.More in vitro and long term in vivo studies are needed to prove longer lasting effects to improve bearing surfaces.

  15. Bearing optimization for SSME HPOTP application

    Science.gov (United States)

    Armstrong, Elizabeth S.; Coe, Harold H.

    1988-01-01

    The space shuttle main engine (SSME) high-pressure oxygen turbopumps (HPOTP) have not experienced the service life required of them. To improve the life of the existing turbopump bearings, modifications to the bearings that could be retrofitted into the present bearing cavity are being investigated. Several bearing parameters were optimized using the computer program SHABERTH, which performs a thermomechanical simulation of a load support system. The computer analysis showed that improved bearing performance is feasible if low friction coefficients can be attained. Bearing geometries were optimized considering heat generation, equilibrium temperatures, and relative life. Two sets of curvatures were selected from the optimization: an inner-raceway curvature of 0.54, an outer-raceway curvature of 0.52, and an inner-raceway curvature of 0.55, an outer-raceway curvature of 0.53. A contact angle of 16 deg was also selected. Thermal gradients through the bearings were found to be lower with liquid lubrication than with solid film lubrication. As the coolant flowrate through the bearing increased, the ball temperature decreased but at a continuously decreasing rate. The optimum flowrate was approximately 4 kg/s. The analytical modeling used to determine these feasible modifications to improve bearing performance is described.

  16. The Accuracy Of Air Bearing Systems

    Science.gov (United States)

    Stout, K. J.

    1987-01-01

    The accuracy of air bearing systems is related in most cases to the static stiffness of the bearing. In practice the stiffness which can be achieved is related to the selection of optimum design parameters. This paper considers journal bearings and discusses the parameters which control bearing performance. Guidance is given to assist the designer in specifying the optimal conditions of each controlling parameter. A graphical design procedure is discussed which enables the designer to interrelate all aspects of design in a simple to use technique whilst still retaining optimal ranges for each parameter involved.

  17. North American Commission on Stratigraphic Nomenclature Note 66: records of Stratigraphic Commission, 2003-2013

    Science.gov (United States)

    Easton, Robert M.; Catuneanu, Octavian; Donovan, Art D.; Fluegeman, Richard H.; Hamblin, A.P.; Harper, Howard; Lasca, Norman P.; Morrow, Jared R.; Orndorff, Randall C.; Sadler, Peter; Scott, Robert W.; Tew, Berry H.

    2014-01-01

    Note 66 summarizes activities of the North American Commission on Stratigraphic Nomenclature (NACSN) from November 2003 to October 2013 and is condensed from the minutes of the NACSN’s 58th to 68th annual meetings1. The purposes of the Commission are to develop statements of stratigraphic principles,recommend procedures applicable to the classification and nomenclature of stratigraphic and related units, review problems in classifying and naming stratigraphic and related units, and formulate expressions of judgment on these matters.

  18. Movements of Yellowstone grizzly bears

    Science.gov (United States)

    Blanchard, Bonnie M.; Knight, Richard R.

    1991-01-01

    Ninety-seven grizzly bears Ursus arctos horribilis were radio-located 6299 times during 1975–1987. Annual range sizes differed by sex, age, reproductive status and amount of precipitation. Females exhibited greater fidelity to seasonal and annual ranges than males. Weaned female offspring generally remained in the vicinity of the maternal range, while weaned males often made substantial movements to unexplored country. Average total home range size was 884 km2 for females and 3757 km2 for males. Males consistently exhibited greater indices of movement and range sizes than females. All cohorts had larger mean ranges during this study than during the period 1959–1969 when the population had access to open garbage dumps. Movements and elevational distribution of all cohorts were related to availability of whitebark pine Pinus albicaulis seeds. We hypothesized that females with cubs-of-the-year and yearlings were displaced from most productive habitats during seasons and years of limited food availability.

  19. Foraging ecology of black bears in urban environments: guidance for human-bear conflict mitigation

    National Research Council Canada - National Science Library

    Lewis, D. L; Baruch-Mordo, S; Wilson, K. R; Breck, S. W; Mao, J. S; Broderick, J

    2015-01-01

    .... We studied black bears ( Ursus americanus ) in the urban area of Aspen, Colorado, USA from 2007 to 2010 to quantify bear foraging on natural and anthropogenic resources and to model factors associated with anthropogenic feeding events...

  20. Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage.

    Science.gov (United States)

    Hailer, Frank; Kutschera, Verena E; Hallström, Björn M; Klassert, Denise; Fain, Steven R; Leonard, Jennifer A; Arnason, Ulfur; Janke, Axel

    2012-04-20

    Recent studies have shown that the polar bear matriline (mitochondrial DNA) evolved from a brown bear lineage since the late Pleistocene, potentially indicating rapid speciation and adaption to arctic conditions. Here, we present a high-resolution data set from multiple independent loci across the nuclear genomes of a broad sample of polar, brown, and black bears. Bayesian coalescent analyses place polar bears outside the brown bear clade and date the divergence much earlier, in the middle Pleistocene, about 600 (338 to 934) thousand years ago. This provides more time for polar bear evolution and confirms previous suggestions that polar bears carry introgressed brown bear mitochondrial DNA due to past hybridization. Our results highlight that multilocus genomic analyses are crucial for an accurate understanding of evolutionary history.

  1. A History of the Atomic Energy Commission

    Science.gov (United States)

    Buck, Alice L.

    1983-07-01

    This pamphlet traces the history of the US Atomic Energy Commission's twenty-eight year stewardship of the Nation's nuclear energy program, from the signing of the Atomic Energy Act on August 1, 1946 to the signing of the Energy Reorganization Act on October 11, 1974. The Commission's early concentration on the military atom produced sophisticated nuclear weapons for the Nation's defense and made possible the creation of a fleet of nuclear submarines and surface ships. Extensive research in the nuclear sciences resulted in the widespread application of nuclear technology for scientific, medical and industrial purposes, while the passage of the Atomic Energy Act of 1954 made possible the development of a nuclear industry, and enabled the United States to share the new technology with other nations.

  2. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    A. Ryd and T. Camporesi

    2010-01-01

    Commissioning and Run Coordination activities After the successful conclusion of the LHC pilot run commissioning in 2009 activities at the experiment restarted only late in January due to the cooling and detector maintenance. As usual we got going with weekly exercises used to deploy, debug, and validate improvements in firmware and software. A debriefing workshop aimed at analyzing the operational aspects of the 2009 pilot run was held on Jan. 15, 2009, to define a list of improvements (and relative priorities) to be planned. In the last month, most of the objectives set in the debriefing workshop have been attained. The major achievements/improvements obtained are the following: - Consolidation of the firmware for both readout and trigger for ECAL - Software implementation of procedures for raising the bias voltage of the silicon tracker and pixel driven by LHC mode changes with automatic propagation of the state changes from the DCS to the DAQ. The improvements in the software and firmware allow suppress...

  3. LHC Damper Beam commissioning in 2010

    CERN Document Server

    Höfle, W; Schokker, M; Valuch, D

    2011-01-01

    The LHC transverse dampers were commissioned in 2010 with beam and their use at injection energy of 450 GeV, during the ramp and in collisions at 3.5 TeV for Physics has become part of the standard operations pro- cedure. The system proved important to limit emittance blow-up at injection and to maintain smaller than nominal emittances throughout the accelerating cycle. We describe the commissioning of the system step-by-step as done in 2010 and summarize its performance as achieved for pro- ton as well as ion beams in 2010. Although its principle function is to keep transverse oscillations under control, the system has also been used as an exciter for abort gap clean- ing and tune measurement. The dedicated beam position measurement system with its low noise properties provides additional possibilities for diagnostics.

  4. A History of the Atomic Energy Commission

    Energy Technology Data Exchange (ETDEWEB)

    Buck, A.L.

    1983-07-01

    This pamphlet traces the history of the US Atomic Energy Commission's twenty-eight year stewardship of the Nation's nuclear energy program, from the signing of the Atomic Energy Act on August 1, 1946 to the signing of the Energy Reorganization Act on October 11, 1974. The Commission's early concentration on the military atom produced sophisticated nuclear weapons for the Nation's defense and made possible the creation of a fleet of nuclear submarines and surface ships. Extensive research in the nuclear sciences resulted in the widespread application of nuclear technology for scientific, medical and industrial purposes, while the passage of the Atomic Energy Act of 1954 made possible the development of a nuclear industry, and enabled the United States to share the new technology with other nations.

  5. Commissioning of the PLS-II

    Science.gov (United States)

    Shin, S.; Kwon, S.; Kim, D.-T.; Kim, D.-E.; Kim, M.; Kim, S.-H.; Kim, S.-C.; Kim, J.; Kim, C.; Park, B.; Park, S.-S.; Park, S.-J.; Park, E.; Son, Y.; Yoon, J.; Lee, B.; Lee, E.; Lee, J.-W.; Lee, H.-S.; Joo, Y.; Choi, J.; Ha, T.; Hwang, W.; Hwang, I.; Lee, J.-Y.; Oh, B.; Lee, C.-H.; Lee, H.-S.; Kim, J.-Y.; Hwang, J. Y.; Nam, S. H.; Cho, M.

    2013-01-01

    After 14 years of successful operation, the Pohang Light Source (PLS) has completed PLS-II upgrade to meet the increasing demand from the growing user community. The PLS-II upgrade has increased the beam energy from 2.5 GeV to 3 GeV; the number of insertion devices has been increased by a factor of two (20 IDs); and the beam current has been increased to 400 mA from 200 mA. The beam emittance has been reduced to below 10 nm while retaining the existing PLS tunnel as well as the existing injection system. During the six months of commissioning in the latter half of 2011, we have successfully achieved 14 insertion device operations and top-up operations with 100 mA beam current and 5.8 nm beam emittance. In this paper, we report the experimental results obtained from the PLS-II commissioning.

  6. Effects of a flooding event on a threatened black bear population in Louisiana

    Science.gov (United States)

    O'Connell-Goode, Kaitlin C.; Lowe, Carrie L.; Clark, Joseph D.

    2014-01-01

    The Louisiana black bear, Ursus americanus luteolus, is listed as threatened under the Endangered Species Act as a result of habitat loss and human-related mortality. Information on population-level responses of large mammals to flooding events is scarce, and we had a unique opportunity to evaluate the viability of the Upper Atchafalaya River Basin (UARB) black bear population before and after a significant flooding event. We began collecting black bear hair samples in 2007 for a DNA mark-recapture study to estimate abundance (N) and apparent survival (φ). In 2011, the Morganza Spillway was opened to divert floodwaters from the Mississippi River through the UARB, inundating > 50% of our study area, potentially impacting recovery of this important bear population. To evaluate the effects of this flooding event on bear population dynamics, we used a robust design multistate model to estimate changes in transition rates from the flooded area to non-flooded area (ψF→NF) before (2007–2010), during (2010–2011) and after (2011–2012) the flood. Average N across all years of study was 63.2 (SE = 5.2), excluding the year of the flooding event. Estimates of ψF→NF increased from 0.014 (SE = 0.010; meaning that 1.4% of the bears moved from the flooded area to non-flooded areas) before flooding to 0.113 (SE = 0.045) during the flood year, and then decreased to 0.028 (SE= 0.035) after the flood. Although we demonstrated a flood effect on transition rates as hypothesized, the effect was small (88.7% of the bears remained in the flooded area during flooding) and φ was unchanged, suggesting that the 2011 flooding event had minimal impact on survival and site fidelity.

  7. European Commission activities in eHealth.

    Science.gov (United States)

    Olsson, Silas; Lymberis, Andreas; Whitehouse, Diane

    2004-12-01

    Health-care is an information-intensive and knowledge-demanding sector, which is why eHealth solutions are so important in this field. The European Commission (EC) has been initiating and funding research and development activities regarding Information and Communication Technologies (ICT) for health, or "eHealth", since 1988. These programmes covered priority topics like electronic health-care records, regional and national health networks, telemedicine in homecare and care-at-the-point-of-need to support continuity of care concepts, systems to support people to stay healthy, and systems and tools to support health professionals to work more efficiently and safely on patients. During the 15-year span of the programmes, the European Union (EU) has contributed about 500 million Euro to approximately 400 R&D projects, support activities, best practice and studies covering technical, clinical, ethical, legal, organisational and market issues. eHealth has shown proven benefits in application fields like improved access to care, care at the point-of-need, citizen-centred care, improved quality and cost containment. Such applications were on show at the EU High Level eHealth Conferences in Brussels, Belgium, in 2003, and in Cork, Ireland, in 2004. eHealth is now on the governmental agenda of EU Member States to be implemented on a broader scale. In line with this development, the Commission has taken a number of policy initiatives. A European Union Action Plan for a European eHealth Area was published by the Commission in April 2004 and endorsed by the EU health ministers in June 2004. This means that, for the first time, Europe has a coherent agenda for the implementation of eHealth. This report will concentrate on eHealth activities initiated by the Information Society Directorate-General of the European Commission.

  8. Hypoid Gear Tooth Bearing Pattern Analysis : 1st Report, The Gear Dimensions for Tooth Bearing Development

    OpenAIRE

    高橋, 幸一; 伊藤, 紀男; 呉, 為民; 吉野, 雅禎

    1990-01-01

    Tooth bearing patterns for hypoid gears cannot be described by conventional theory. In gear manufacturing factories, tooth bearing development is still required in order to obtain good tooth bearing patterns. This paper presents a new method for the development of hypoid tooth bearing patterns which differs from the conventional and experimental gear cutting methods. This report makes it possible to obtain accurate hypoid gear dimensions which consist of the mating pressure angles, spiral ang...

  9. Study design and sampling intensity for demographic analyses of bear populations

    Science.gov (United States)

    Harris, R.B.; Schwartz, C.C.; Mace, R.D.; Haroldson, M.A.

    2011-01-01

    The rate of population change through time (??) is a fundamental element of a wildlife population's conservation status, yet estimating it with acceptable precision for bears is difficult. For studies that follow known (usually marked) bears, ?? can be estimated during some defined time by applying either life-table or matrix projection methods to estimates of individual vital rates. Usually however, confidence intervals surrounding the estimate are broader than one would like. Using an estimator suggested by Doak et al. (2005), we explored the precision to be expected in ?? from demographic analyses of typical grizzly (Ursus arctos) and American black (U. americanus) bear data sets. We also evaluated some trade-offs among vital rates in sampling strategies. Confidence intervals around ?? were more sensitive to adding to the duration of a short (e.g., 3 yrs) than a long (e.g., 10 yrs) study, and more sensitive to adding additional bears to studies with small (e.g., 10 adult females/yr) than large (e.g., 30 adult females/yr) sample sizes. Confidence intervals of ?? projected using process-only variance of vital rates were only slightly smaller than those projected using total variances of vital rates. Under sampling constraints typical of most bear studies, it may be more efficient to invest additional resources into monitoring recruitment and juvenile survival rates of females already a part of the study, than to simply increase the sample size of study females. ?? 2011 International Association for Bear Research and Management.

  10. High contributions of sea ice derived carbon in polar bear (Ursus maritimus) tissue

    Science.gov (United States)

    Galicia, Melissa P.; Thiemann, Gregory W.; Belt, Simon T.; Yurkowski, David J.; Dyck, Markus G.

    2018-01-01

    Polar bears (Ursus maritimus) rely upon Arctic sea ice as a physical habitat. Consequently, conservation assessments of polar bears identify the ongoing reduction in sea ice to represent a significant threat to their survival. However, the additional role of sea ice as a potential, indirect, source of energy to bears has been overlooked. Here we used the highly branched isoprenoid lipid biomarker-based index (H-Print) approach in combination with quantitative fatty acid signature analysis to show that sympagic (sea ice-associated), rather than pelagic, carbon contributions dominated the marine component of polar bear diet (72–100%; 99% CI, n = 55), irrespective of differences in diet composition. The lowest mean estimates of sympagic carbon were found in Baffin Bay bears, which were also exposed to the most rapidly increasing open water season. Therefore, our data illustrate that for future Arctic ecosystems that are likely to be characterised by reduced sea ice cover, polar bears will not only be impacted by a change in their physical habitat, but also potentially in the supply of energy to the ecosystems upon which they depend. This data represents the first quantifiable baseline that is critical for the assessment of likely ongoing changes in energy supply to Arctic predators as we move into an increasingly uncertain future for polar ecosystems. PMID:29360849

  11. Phylogeography of mitochondrial DNA variation in brown bears and polar bears

    Science.gov (United States)

    Shields, Gerald F.; Adams, Deborah; Garner, Gerald W.; Labelle, Martine; Pietsch, Jacy; Ramsay, Malcolm; Schwartz, Charles; Titus, Kimberly; Williamson, Scott

    2000-01-01

    We analyzed 286 nucleotides of the middle portion of the mitochondrial cytochrome b gene of 61 brown bears from three locations in Alaska and 55 polar bears from Arctic Canada and Arctic Siberia to test our earlier observations of paraphyly between polar bears and brown bears as well as to test the extreme uniqueness of mitochondrial DNA types of brown bears on Admiralty, Baranof, and Chichagof (ABC) islands of southeastern Alaska. We also investigated the phylogeography of brown bears of Alaska's Kenai Peninsula in relation to other Alaskan brown bears because the former are being threatened by increased human development. We predicted that: (1) mtDNA paraphyly between brown bears and polar bears would be upheld, (2) the mtDNA uniqueness of brown bears of the ABC islands would be upheld, and (3) brown bears of the Kenai Peninsula would belong to either clade II or clade III of brown bears of our earlier studies of mtDNA. All of our predictions were upheld through the analysis of these additional samples.

  12. Unbalance Response Prediction for Rotors on Ball Bearings Using Speed and Load Dependent Nonlinear Bearing Stiffness

    Science.gov (United States)

    Fleming, David P.; Poplawski, J. V.

    2003-01-01

    Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic analysis requires that bearing forces corresponding to the actual bearing deflection be utilized. For this work bearing forces were calculated by COBRA-AHS, a recently developed rolling-element bearing analysis code. Bearing stiffness was found to be a strong function of bearing deflection, with higher deflection producing markedly higher stiffness. Curves fitted to the bearing data for a range of speeds and loads were supplied to a flexible rotor unbalance response analysis. The rotordynamic analysis showed that vibration response varied nonlinearly with the amount of rotor imbalance. Moreover, the increase in stiffness as critical speeds were approached caused a large increase in rotor and bearing vibration amplitude over part of the speed range compared to the case of constant bearing stiffness. Regions of bistable operation were possible, in which the amplitude at a given speed was much larger during rotor acceleration than during deceleration. A moderate amount of damping will eliminate the bistable region, but this damping is not inherent in ball bearings.

  13. [Society of Nephrology, Computer Technology Commission. Dialysis computer program. VI. - Survival and risk factors].

    Science.gov (United States)

    Degoulet, P; Reach, I; Rozenbaum, W; Aime, F; Devries, C; Berger, C; Rojas, P; Jacobs, C; Legrain, M

    1979-12-01

    The sixth report of the "Diaphane Dialyse Informatique" Program concerns 2,518 adult patients (age 15 and over) treated by chronic hemodialysis or hemofiltration in 33 French dialysis centres between June 1972 and December 1978. 1) The number of centers participating to the program is progressively increasing. Overall duration of follow-up represents 4,192 patient-years, allowing precise evolutive studies of terminal renal failure treated by hemodialysis. 2) Mean age at start of treatment continues to increase. Among 709 patients who started treatment in 1977-1978, 8,8 p. 100 of men and 11 p. 100 of women were over 69 years old. 3) Patients with diabetic nephropathy represent 4,4 p. 100 of all patients dialyzed between 1972 and 1978 and 5,9 p. 100 of the patients starting treatment in 1977-1978. 4) The percentage of patients temporarily treated by peritoneal dialysis before hemodialysis decreases from 32,9 p. 100 in 1973-1974 to 15,9 p. 100 in 1977-1978. 5) In 1978, 65,3 p. 100 of patients are dialyzed 3 times a week with a mean weekly duration of 14,0 h for male and 12,9 for female. 73 p. 100 of the patients are dialyzed during the night. 6) Disposable parallel plate hemodialyzers (71,8 per cent of dialysis sessions in 1978) and hollow fiber hemodialyzers (11,6 per cent) progressively replace disposable coil dialyzers and non disposable Kiil dialyzers. 7) Transient hypotensive episodes during dialysis sessions remain the most frequent complications (21,7 per cent of sessions in 1978). Transient hypotensive episodes are more frequently observed with coils than with parallel plate hemodialyzers or with hollow fiber dialyzers. 8) Mean diastolic blood pressure (DBP) +/- SD is 101,9 +/- 21,7 mmHg at start of dialysis and 81,4 +/- 11,8 mmHg when dialysed. During the course of treatment 28,7 per cent of the patients receive long term antihypertensive treatment. In spite of dialysis and antihypertensive treatments 11 per cent of all patients followed up maintain DBP greater than or equal to 95 mmHg. 9) Viral hepatitis remain the most prominent infectious problem with 30 per cent of patients being chronic Hbs antigen carriers. 10) Annual death rate calculated in the 2,518 patients dialyzed between 1972 and 1978 (78/1000) is 12 times superior to the death rate of the French population, adjusted for sex and age to the dialysis population. 43,1 per cent of deaths are of cardiovascular origin. Risk factors for overall mortality are age, sex (male), existence of a vascular or diabetic nephropathy, twice weekly dialysis strategy, elevation of systolic or diastolic blood pressure during the course of dialysis treatment, hypocholesterolemia and to a lesser extent hypotriglyceridemia. On the contrary, hypercholesterolemia, hypertriglyceridemia and hyperuricemia do not appear as risk factors for overall mortality or cardiovascular mortality. These results plead for a perfect control of hypertension and to the extension of thrice weekly dialysis for the whole population of patients treated by maintenance hemodialysis.

  14. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    Directory of Open Access Journals (Sweden)

    Peter W. Tse

    2017-02-01

    Full Text Available Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL. Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

  15. Practical Diagnostics for Evaluating Residential Commissioning Metrics

    Energy Technology Data Exchange (ETDEWEB)

    Wray, Craig; Walker, Iain; Siegel, Jeff; Sherman, Max

    2002-06-11

    In this report, we identify and describe 24 practical diagnostics that are ready now to evaluate residential commissioning metrics, and that we expect to include in the commissioning guide. Our discussion in the main body of this report is limited to existing diagnostics in areas of particular concern with significant interactions: envelope and HVAC systems. These areas include insulation quality, windows, airtightness, envelope moisture, fan and duct system airflows, duct leakage, cooling equipment charge, and combustion appliance backdrafting with spillage. Appendix C describes the 83 other diagnostics that we have examined in the course of this project, but that are not ready or are inappropriate for residential commissioning. Combined with Appendix B, Table 1 in the main body of the report summarizes the advantages and disadvantages of all 107 diagnostics. We first describe what residential commissioning is, its characteristic elements, and how one might structure its process. Our intent in this discussion is to formulate and clarify these issues, but is largely preliminary because such a practice does not yet exist. Subsequent sections of the report describe metrics one can use in residential commissioning, along with the consolidated set of 24 practical diagnostics that the building industry can use now to evaluate them. Where possible, we also discuss the accuracy and usability of diagnostics, based on recent laboratory work and field studies by LBNL staff and others in more than 100 houses. These studies concentrate on evaluating diagnostics in the following four areas: the DeltaQ duct leakage test, air-handler airflow tests, supply and return grille airflow tests, and refrigerant charge tests. Appendix A describes those efforts in detail. In addition, where possible, we identify the costs to purchase diagnostic equipment and the amount of time required to conduct the diagnostics. Table 1 summarizes these data. Individual equipment costs for the 24

  16. Multinationals and plant survival

    DEFF Research Database (Denmark)

    Bandick, Roger

    2010-01-01

    The aim of this paper is twofold: first, to investigate how different ownership structures affect plant survival, and second, to analyze how the presence of foreign multinational enterprises (MNEs) affects domestic plants’ survival. Using a unique and detailed data set on the Swedish manufacturing...... sector, I am able to separate plants into those owned by foreign MNEs, domestic MNEs, exporting non-MNEs, and purely domestic firms. In line with previous findings, the result, when conditioned on other factors affecting survival, shows that foreign MNE plants have lower survival rates than non......-MNE plants. However, separating the non-MNEs into exporters and non-exporters, the result shows that foreign MNE plants have higher survival rates than non-exporting non-MNEs, while the survival rates of foreign MNE plants and exporting non-MNE plants do not seem to differ. Moreover, the simple non...

  17. Hydrodynamic Lubrication Analysis Of Slider Bearings Lubricated ...

    African Journals Online (AJOL)

    Hydrodynamic Lubrication Analysis Of Slider Bearings Lubricated With Micropolar Fluids. ... The finite element method and Gauss Seidel iterative procedure have been used to simulate the modified Reynolds equation governing the micropolar lubricant flow in the bearing. The variations of pressure and load capacity are ...

  18. 33 CFR 117.543 - Bear Creek.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Bear Creek. 117.543 Section 117.543 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Maryland § 117.543 Bear Creek. (a) The draws of the Baltimore...

  19. Shaft Center Orbit in Dynamically Loaded Bearings

    DEFF Research Database (Denmark)

    Klit, Peder

    2005-01-01

    The aim of this work is to demonstrate how to utilize the bearings damping coe±cients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 [1]and described further in 1972 [2]. Several authors have re¯ned this metho...

  20. Development of new materials for turbopump bearings

    Science.gov (United States)

    Maurer, R. E.; Pallini, R. A.

    1985-01-01

    The life requirement for the angular contact ball bearings in the Space Shuttle Main Engine (SSME) high pressure oxygen turbopump (HPOTP) is 7.5 hours. In actual operation, significantly shorter service life was experienced. The objective is to identify bearing materials and/or materials processing techniques offering signficant potential for extending HPOTP bearing performance life. Interactive thermomechanical analysis of the HPOTP bearing-shaft system was performed with the SHABERTH computer program. Bearing fatigue life, ball-race contact stress, heat generation rate, bulk ring temperatures and circumferential stress in the inner rings were quantified as functions of radial load, thrust load and ball-race contact friction. Criteria established from the output of this analysis are being used for material candidate selection.

  1. Foil Bearing Stiffness Estimation with Pseudospectral Scheme

    Directory of Open Access Journals (Sweden)

    Sankar Balaji

    2016-01-01

    Full Text Available Compliant foil gas lubricated bearings are used for the support of light loads in the order of few kilograms at high speeds, in the order of 50,000 RPM. The stiffness of the foil bearings depends both on the stiffness of the compliant foil and on the lubricating gas film. The stiffness of the bearings plays a crucial role in the stable operation of the supported rotor over a range of speeds. This paper describes a numerical approach to estimate the stiffness of the bearings using pseudo spectral scheme. Methodology to obtain the stiffness of the foil bearing as a function of weight of the shaft is given and the results are presented.

  2. Temporal effects of hunting on foraging behavior of an apex predator: Do bears forego foraging when risk is high?

    Science.gov (United States)

    Hertel, Anne G; Zedrosser, Andreas; Mysterud, Atle; Støen, Ole-Gunnar; Steyaert, Sam M J G; Swenson, Jon E

    2016-12-01

    Avoiding predators most often entails a food cost. For the Scandinavian brown bear (Ursus arctos), the hunting season coincides with the period of hyperphagia. Hunting mortality risk is not uniformly distributed throughout the day, but peaks in the early morning hours. As bears must increase mass for winter survival, they should be sensitive to temporal allocation of antipredator responses to periods of highest risk. We expected bears to reduce foraging activity at the expense of food intake in the morning hours when risk was high, but not in the afternoon, when risk was low. We used fine-scale GPS-derived activity patterns during the 2 weeks before and after the onset of the annual bear hunting season. At locations of probable foraging, we assessed abundance and sugar content, of bilberry (Vaccinium myrtillus), the most important autumn food resource for bears in this area. Bears decreased their foraging activity in the morning hours of the hunting season. Likewise, they foraged less efficiently and on poorer quality berries in the morning. Neither of our foraging measures were affected by hunting in the afternoon foraging bout, indicating that bears did not allocate antipredator behavior to times of comparably lower risk. Bears effectively responded to variation in risk on the scale of hours. This entailed a measurable foraging cost. The additive effect of reduced foraging activity, reduced forage intake, and lower quality food may result in poorer body condition upon den entry and may ultimately reduce reproductive success.

  3. Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

    Science.gov (United States)

    Reheis, M.C.; Laabs, B.J.C.; Kaufman, D.S.

    2009-01-01

    Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake

  4. Radiocarbon dates on cave bear (Ursus spelaeus) and brown bear (Ursus arctos) from Late Pleistocene of Poland

    Science.gov (United States)

    Nadachowski, Adam; Lipecki, Grzegorz; Stefaniak, Krzysztof; Wojtal, Piotr

    2010-05-01

    . However, this evidence requires further investigation. The dates younger than 29 ka BP (cal. 33 ka BP) include 4 dates ranging from 28,500±500 BP (GdA-94) (this conventional 14C date is doubtful due to pre-treatment methods used) to 26,010±150 BP (OxA-14406) (cal. 30,971±344 BP). The youngest available so far AMS date from Poland is a fragment presumably of cave bear skull (we cannot exclude the brown bear) from Komarowa Cave (layer C), 24,550±220 BP (Poz-339) (cal. 29,361±508 BP). However, this date must be regarded with considerable caution because the improved pre-treatment methods were not used. Although the data are still limited at present, there are strong indications that the cave bear (Ursus spelaeus) did not survived to the Last Glacial Maximum (LGM), and become extinct ca. 26 ka BP (ca. cal. 31 ka BP) at areas north from the Sudetes and the Carpathians ranges, thus earlier than in the Alps (ca. 24 ka BP, ca. cal. 28 ka BP). The direct dating of brown bear remains are still scarce. The AMS 14C dates were obtained for 10 remains of Ursus arctos previously dated for late Pleistocene on the basis of stratigraphic position of remains and archaeological chronology. The Eastern Sudetes sites are represented by a single date of brown bear skull described previously by Zotz (1939) from a cave (most probably Kammerberghöhle) near Wschodnia Cave (Połom Mt.). Most of samples come from few archaeological sites located in different parts of Kraków-Częstochowa Upland (Mamutowa, Komarowa, Deszczowa and Dziadowa Skała caves). A single date obtained for Kraków Spadzista Street (from a trench near site B) is surprising, because of extreme rarity of brown bears in archaeological open-air sites in Poland. In six cases the late Pleistocene age of Ursus arctos remains was confirmed, however only one obtained date agree with the opinion of possible co-occurrence of the brown bear and cave bear during OIS 3 in Poland (Kadzielnia in Kielce, ca. 37,7 ka BP). The oldest

  5. Simultaneous calibration phantom commission and geometry calibration in cone beam CT

    Science.gov (United States)

    Xu, Yuan; Yang, Shuai; Ma, Jianhui; Li, Bin; Wu, Shuyu; Qi, Hongliang; Zhou, Linghong

    2017-09-01

    Geometry calibration is a vital step for describing the geometry of a cone beam computed tomography (CBCT) system and is a prerequisite for CBCT reconstruction. In current methods, calibration phantom commission and geometry calibration are divided into two independent tasks. Small errors in ball-bearing (BB) positioning in the phantom-making step will severely degrade the quality of phantom calibration. To solve this problem, we propose an integrated method to simultaneously realize geometry phantom commission and geometry calibration. Instead of assuming the accuracy of the geometry phantom, the integrated method considers BB centers in the phantom as an optimized parameter in the workflow. Specifically, an evaluation phantom and the corresponding evaluation contrast index are used to evaluate geometry artifacts for optimizing the BB coordinates in the geometry phantom. After utilizing particle swarm optimization, the CBCT geometry and BB coordinates in the geometry phantom are calibrated accurately and are then directly used for the next geometry calibration task in other CBCT systems. To evaluate the proposed method, both qualitative and quantitative studies were performed on simulated and realistic CBCT data. The spatial resolution of reconstructed images using dental CBCT can reach up to 15 line pair cm-1. The proposed method is also superior to the Wiesent method in experiments. This paper shows that the proposed method is attractive for simultaneous and accurate geometry phantom commission and geometry calibration.

  6. Simultaneous calibration phantom commission and geometry calibration in cone beam CT.

    Science.gov (United States)

    Xu, Yuan; Yang, Shuai; Ma, Jianhui; Li, Bin; Wu, Shuyu; Qi, Hongliang; Zhou, Linghong

    2017-08-09

    Geometry calibration is a vital step for describing the geometry of a cone beam computed tomography (CBCT) system and is a prerequisite for CBCT reconstruction. In current methods, calibration phantom commission and geometry calibration are divided into two independent tasks. Small errors in ball-bearing (BB) positioning in the phantom-making step will severely degrade the quality of phantom calibration. To solve this problem, we propose an integrated method to simultaneously realize geometry phantom commission and geometry calibration. Instead of assuming the accuracy of the geometry phantom, the integrated method considers BB centers in the phantom as an optimized parameter in the workflow. Specifically, an evaluation phantom and the corresponding evaluation contrast index are used to evaluate geometry artifacts for optimizing the BB coordinates in the geometry phantom. After utilizing particle swarm optimization, the CBCT geometry and BB coordinates in the geometry phantom are calibrated accurately and are then directly used for the next geometry calibration task in other CBCT systems. To evaluate the proposed method, both qualitative and quantitative studies were performed on simulated and realistic CBCT data. The spatial resolution of reconstructed images using dental CBCT can reach up to 15 line pair cm-1. The proposed method is also superior to the Wiesent method in experiments. This paper shows that the proposed method is attractive for simultaneous and accurate geometry phantom commission and geometry calibration.

  7. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and bearing...

  8. The effect of body size evolution and ecology on encephalization in cave bears and extant relatives.

    Science.gov (United States)

    Veitschegger, Kristof

    2017-06-05

    The evolution of larger brain volumes relative to body size in Mammalia is the subject of an extensive amount of research. Early on palaeontologists were interested in the brain of cave bears, Ursus spelaeus, and described its morphology and size. However, until now, it was not possible to compare the absolute or relative brain size in a phylogenetic context due to the lack of an established phylogeny, comparative material, and phylogenetic comparative methods. In recent years, many tools for comparing traits within phylogenies were developed and the phylogenetic position of cave bears was resolved based on nuclear as well as mtDNA. Cave bears exhibit significantly lower encephalization compared to their contemporary relatives and intraspecific brain mass variation remained rather small. Encephalization was correlated with the combined dormancy-diet score. Body size evolution was a main driver in the degree of encephalization in cave bears as it increased in a much higher pace than brain size. In Ursus spelaeus, brain and body size increase over time albeit differently paced. This rate pattern is different in the highest encephalized bear species within the dataset, Ursus malayanus. The brain size in this species increased while body size heavily decreased compared to its ancestral stage. Early on in the evolution of cave bears encephalization decreased making it one of the least encephalized bear species compared to extant and extinct members of Ursidae. The results give reason to suspect that as herbivorous animals, cave bears might have exhibited a physiological buffer strategy to survive the strong seasonality of their environment. Thus, brain size was probably affected by the negative trade-off with adipose tissue as well as diet. The decrease of relative brain size in the herbivorous Ursus spelaeus is the result of a considerable increase in body size possibly in combination with environmental conditions forcing them to rest during winters.

  9. Suppressed bone remodeling in black bears conserves energy and bone mass during hibernation.

    Science.gov (United States)

    McGee-Lawrence, Meghan; Buckendahl, Patricia; Carpenter, Caren; Henriksen, Kim; Vaughan, Michael; Donahue, Seth

    2015-07-01

    Decreased physical activity in mammals increases bone turnover and uncouples bone formation from bone resorption, leading to hypercalcemia, hypercalcuria, bone loss and increased fracture risk. Black bears, however, are physically inactive for up to 6 months annually during hibernation without losing cortical or trabecular bone mass. Bears have been shown to preserve trabecular bone volume and architectural parameters and cortical bone strength, porosity and geometrical properties during hibernation. The mechanisms that prevent disuse osteoporosis in bears are unclear as previous studies using histological and serum markers of bone remodeling show conflicting results. However, previous studies used serum markers of bone remodeling that are known to accumulate with decreased renal function, which bears have during hibernation. Therefore, we measured serum bone remodeling markers (BSALP and TRACP) that do not accumulate with decreased renal function, in addition to the concentrations of serum calcium and hormones involved in regulating bone remodeling in hibernating and active bears. Bone resorption and formation markers were decreased during hibernation compared with when bears were physically active, and these findings were supported by histomorphometric analyses of bone biopsies. The serum concentration of cocaine and amphetamine regulated transcript (CART), a hormone known to reduce bone resorption, was 15-fold higher during hibernation. Serum calcium concentration was unchanged between hibernation and non-hibernation seasons. Suppressed and balanced bone resorption and formation in hibernating bears contributes to energy conservation, eucalcemia and the preservation of bone mass and strength, allowing bears to survive prolonged periods of extreme environmental conditions, nutritional deprivation and anuria. © 2015. Published by The Company of Biologists Ltd.

  10. Report of the State of Nevada Commission on Nuclear Projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-01

    This third biennial Report of the Nevada Commission on Nuclear Projects has been prepared in fulfillment of the requirements of NRS 459.0092, which stipulates that the Commission shall report to the Governor and Legislature on any matter relating to radioactive waste disposal the Commission deems appropriate and advise and make recommendations on the policy of the State concerning nuclear waste disposal projects. Chapter One of the Report presents a brief overview of the Commission`s functions and statutory charges. It also contains a summary of developments which have affected the overall nuclear waste disposl issue since the last Commission Report was published in November, 1988. Chapter Two contains a synthesis of Commission activities and reports on the findings of the Commission relative to the geotechnical, environmental, socioeconomic, transportation, intergovernmental and legal aspects of federal and State nuclear waste program efforts.

  11. Bearing tester data compilation, analysis, and reporting and bearing math modeling

    Science.gov (United States)

    1983-01-01

    The Shaberth bearing analysis computer program was developed for the analysis of jet engine shaft/bearing systems operating above room temperature with normal hydrocarbon lubricants. It is also possible to use this tool to evaluate the shaft bearing systems operating in cryogenics. Effects such as fluid drag, radial temperature gradients, outer race misalignments and clearance changes were simulated and evaluated. In addition, the speed and preload effects on bearing radial stiffness was evaluated. The Shaberth program was also used to provide contact stresses from which contact geometry was calculated to support other analyses such as the determination of cryogenic fluid film thickness in the contacts and evaluation of surface and subsurface stresses necessary for bearing failure evaluation. This program was a vital tool for the thermal analysis of the bearing in that it provides the heat generation rates at the rolling element/race contacts for input into a thermal model of the bearing/shaft assembly.

  12. THE STRUCTURAL ANALYSIS OF STEEL SILOS WITH CYLINDRICAL-WALL BEARING AND PROFILE-STEEL BEARING

    Directory of Open Access Journals (Sweden)

    Zhengjun Tang

    2015-04-01

    Full Text Available The silos are widely used in bulk material in many fields such as agriculture, mining, chemical, electric power storage, etc. Thin metal cylindrical silo shells are vulnerable to buckling failure caused by the compressive wall friction force. In this paper, the structural analysis of two types of steel silo with cylindrical-wall bearing and profile-steel bearing is implemented by Abaqus finite element analysis. The results indicate that under the same loading conditions, steel silos with profile-steel bearing and cylindrical-Wall bearing have similar values in Mises stress, but the steel silo with profile-steel bearing has a smaller radial displacement and a better capability of buckling resistance. Meanwhile, the total steel volumes reduced 8.0% comparing to the steel silo with cylindrical-wall bearing. Therefore, steel soil with profile-steel bearing not only has a less steel volumes but also a good stability.

  13. Federal Energy Regulatory Commission fiscal year 1997 annual financial statements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-24

    This report presents the results of the independent certified public accountants` audit of the Federal Energy Regulatory commission`s statements of financial position, and the related statements of operations and changes in net position. The auditors` work was conducted in accordance with generally accepted government auditing standards. An independent public accounting firm conducted the audit. The auditors` reports on the Commission`s internal control structure and compliance with laws and regulations disclosed no reportable conditions or instances of noncompliance.

  14. 11 CFR 103.1 - Notification of the commission.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Notification of the commission. 103.1 Section 103.1 Federal Elections FEDERAL ELECTION COMMISSION GENERAL CAMPAIGN DEPOSITORIES (2 U.S.C. 432(h)) § 103.1 Notification of the commission. Each committee shall notify the Commission of the campaign depository(ies) it has designated, pursuant to 11...

  15. Nuclear Regulatory Commission issuances, October 1993. Volume 38, No. 4

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    This document contains a Commission issuance in which the Commission denies the petitioners` motion to quash or modify a subpoena issued by the NRC staff in the course of an investigation to determine if the petitioners` have violated NRC regulations and to determine if safety-related problems exist at NRC-licensed facilities. The pertinent regulations and the Commission`s Memorandum and Order are included.

  16. Commissioning of the ATLAS pixel detector

    Energy Technology Data Exchange (ETDEWEB)

    ATLAS Collaboration; Golling, Tobias

    2008-09-01

    The ATLAS pixel detector is a high precision silicon tracking device located closest to the LHC interaction point. It belongs to the first generation of its kind in a hadron collider experiment. It will provide crucial pattern recognition information and will largely determine the ability of ATLAS to precisely track particle trajectories and find secondary vertices. It was the last detector to be installed in ATLAS in June 2007, has been fully connected and tested in-situ during spring and summer 2008, and is ready for the imminent LHC turn-on. The highlights of the past and future commissioning activities of the ATLAS pixel system are presented.

  17. Commissioning status of the Virgo interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Accadia, T [Laboratoire d' Annecy-le-Vieux de Physique des Particules (LAPP), IN2P3/CNRS, Universite de Savoie, F-74941 Annecy-le-Vieux (France); Swinkels, B L, E-mail: bas.swinkels@ego-gw.i [European Gravitational Observatory (EGO), I-56021 Cascina (Pi) (Italy)

    2010-04-21

    The Virgo interferometer is one of the big observatories aimed at detecting gravitational waves. This paper will describe the Virgo + upgrades and the commissioning work performed between the first Virgo science run (VSR1) and the second Virgo science run (VSR2). Some first results of VSR2 will be discussed, which was recently started with a good duty cycle and an inspiral range for the detection of binary neutron-star inspirals of 10 Mpc. To conclude, an outlook will be given on some future upgrades of the detector.

  18. Achievements in CTF3 and Commissioning status

    CERN Document Server

    Bettoni, S; Corsini, R; Dabrowski, A; Döbert, S; Manglunki, D; Skowronski, P; Tecker, F

    2010-01-01

    The aim of the latest CLIC test facility CTF3, built at CERN by an international collaboration, is to prove the main feasibility issues of the CLIC two-beam acceleration technology. Several of the main goals have been already achieved in the past years, like the full-loading linac operation mode and the delay loop principle. During 2008 also the combiner ring concept has been experimentally proven and the recombined beam has been used to generate the RF power. In parallel in the fall of the year also the probe beam line commissioning had started.

  19. Commissioning of laser assisted cold spraying technology

    CSIR Research Space (South Africa)

    Tlotleng, Monnamme

    2012-10-01

    Full Text Available Al-12wt%Si powder with particle size distribution (PSD) of +45-90 microns was used. The use of this powder was premised on knowledge that this PSD range is typical for CS coating powders and, this powder is cheap when compared to narrow... technology is successfully commissioned. Our future work is detailed around the fabrication of bio-compatible material which are aimed at hip implants. This will be achieved using commercial pure titanium (powder) and hydroxyapatite (HAP-coating) on Ti-6Al...

  20. LHCb Commissioning and Potential Early Results

    CERN Document Server

    Deissenroth, M

    2009-01-01

    The LHCb (Large Hadron Coolider beauty) detector is designed to study B meson decays with very high precision. The construction and installation of the LHCb detector has been finished early summer 2008. Despite the horizontal geometry of the spectrometer over 1 million cosmic events are collected that allow a first time and space alignment of most of the sub-detectors. Moreover events from beam dumps during the LHC synchronization tests provided very useful data for further calibration. An overview, results from commissioning activities and an outlook on the second startup at the end of 2009, including a brief summary of the potential early physics results, are presented.

  1. 47 CFR 87.51 - Aircraft earth station commissioning.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Aircraft earth station commissioning. 87.51... SERVICES AVIATION SERVICES Applications and Licenses § 87.51 Aircraft earth station commissioning. (a) (b) Aircraft earth stations authorized to operate in the Inmarsat space segment must display the Commission...

  2. 77 FR 73461 - Commission Seeks Comment on Broadcast Ownership Report

    Science.gov (United States)

    2012-12-10

    ... COMMISSION Commission Seeks Comment on Broadcast Ownership Report AGENCY: Federal Communications Commission... the Media Bureau's recently released report on the ownership of commercial broadcast stations, which... contained in the Media Bureau's recently released report on the ownership of commercial broadcast stations...

  3. Stepwise commissioning of a steam boiler with stability guarantees

    DEFF Research Database (Denmark)

    Johansen, Simon Vestergaard; Kallesøe, Carsten Skovmose; Bendtsen, Jan Dimon

    2016-01-01

    This paper aims to make the commissioning of an industrial MIMO controller more straightforward by gradually commissioning it from a set of SISO controllers, after the system has been started. For this purpose a stepwise commissioning strategy based on the Youla-Kucera parametrization has been...

  4. 77 FR 43819 - Equity and Excellence Commission; Meeting

    Science.gov (United States)

    2012-07-26

    ... Equity and Excellence Commission; Meeting AGENCY: Office for Civil Rights, U.S. Department of Education... up-coming meeting of the Equity and Excellence Commission (Commission). The notice also describes the..., in Room 4W334. FOR FURTHER INFORMATION CONTACT: Guy Johnson, Designated Federal Official, Equity and...

  5. 77 FR 15089 - Equity and Excellence Commission Meeting

    Science.gov (United States)

    2012-03-14

    ... Equity and Excellence Commission Meeting AGENCY: Office for Civil Rights, U.S. Department of Education... up-coming meeting of the Equity and ] Excellence Commission (Commission). The notice also describes..., in Room 1W105/108. FOR FURTHER INFORMATION CONTACT: Jim Eichner, Designated Federal Official, Equity...

  6. 77 FR 33203 - Equity and Excellence Commission, Meeting Cancellation

    Science.gov (United States)

    2012-06-05

    ... Equity and Excellence Commission, Meeting Cancellation AGENCY: U.S. Department of Education. ACTION... cancellation of the Meeting of the Equity and Excellence Commission scheduled for June 4, 2012 and announced in..., Equity and Excellence Commission, U.S. Department of Education, 400 Maryland Avenue SW., Washington, DC...

  7. The Truth and Reconciliation Commission of South Africa

    African Journals Online (AJOL)

    abuses and murders in the period of ex-president Pinochet (Truth and Reconciliation. Commission 1993). The changes in Third World countries and the Eastern block countries have resulted in more such commissions. Countries such as Israel,. Guinea, Uganda and Argentina2 established commissions to deal with past ...

  8. 77 FR 28639 - Meeting of the CFC-50 Commission

    Science.gov (United States)

    2012-05-15

    ... MANAGEMENT Meeting of the CFC-50 Commission AGENCY: Office of Personnel Management. ACTION: Notice. SUMMARY: The CFC-50 Advisory Commission will hold its fourth and final meeting on May 29, 2012, at the time and... ] Campaign (CFC) to ensure its continued growth and success. The Commission is an advisory committee composed...

  9. 77 FR 37836 - Petition Requesting Commission Action Regarding Crib Bumpers

    Science.gov (United States)

    2012-06-25

    ... COMMISSION 16 CFR Chapter II Petition Requesting Commission Action Regarding Crib Bumpers AGENCY: U.S... Commission initiate rulemaking to distinguish and regulate ``hazardous pillow-like'' crib bumpers from ``non-hazardous traditional'' crib bumpers under sections 7 and 9 of the Consumer Product Safety Act (``CPSA...

  10. 75 FR 2114 - Military Leadership Diversity Commission (MLDC); Meeting

    Science.gov (United States)

    2010-01-14

    ... Office of the Secretary Military Leadership Diversity Commission (MLDC); Meeting AGENCY: Office of the... announces that the Military Leadership Diversity Commission (MLDC) will meet from February 10-12, 2010... Military Leadership Diversity Commission to continue their efforts to address congressional concerns as...

  11. 78 FR 4366 - Appeal Proceedings Before the Commission

    Science.gov (United States)

    2013-01-22

    ... authority's adoption of alternate standards from those required by the Commission's minimum internal control... or dissolved. 25 U.S.C. 2713(a)(2), 2713(b). By regulation, the Commission has also provided rights... Commission provided tribal gaming regulatory authorities (TGRA) with ] rights to appeal the Chair's decisions...

  12. 75 FR 7927 - National Commission on Fiscal Responsibility and Reform

    Science.gov (United States)

    2010-02-23

    ... Commission on Fiscal Responsibility and Reform By the authority vested in me as President by the Constitution... Fiscal Responsibility and Reform (Commission). Sec. 2. Membership. The Commission shall be composed of 18... identifying policies to improve the fiscal situation in the medium term and to achieve fiscal sustainability...

  13. 29 CFR 778.117 - Commission payments-general.

    Science.gov (United States)

    2010-07-01

    ... Requirements Principles for Computing Overtime Pay Based on the âregular Rateâ § 778.117 Commission payments—general. Commissions (whether based on a percentage of total sales or of sales in excess of a specified... 29 Labor 3 2010-07-01 2010-07-01 false Commission payments-general. 778.117 Section 778.117 Labor...

  14. 33 CFR 23.20 - Coast Guard commission pennant.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Coast Guard commission pennant. 23.20 Section 23.20 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL DISTINCTIVE MARKINGS FOR COAST GUARD VESSELS AND AIRCRAFT § 23.20 Coast Guard commission pennant. The Coast Guard commission pennant shall have...

  15. Arizona Commission of Indian Affairs 1975-76 Annual Report.

    Science.gov (United States)

    Arizona Commission of Indian Affairs, Phoenix.

    The Arizona Commission of Indian Affairs' annual report is issued to inform the Governor, State Legislature, and tribal governments of the proceedings, transactions, findings, and recommendations made by the Commission, and this 1975-76 report presents the following: (1) Commission membership; (2) a map of the American Indian reservation areas in…

  16. Arizona Commission of Indian Affairs 1976-1977 Annual Report.

    Science.gov (United States)

    Arizona Commission of Indian Affairs, Phoenix.

    Issued to inform the Governor, State Legislature, and tribal governments of the proceedings, transactions, findings, and recommendations made by the Commission, this 1976-77 annual report includes the following: the Commission's membership; population and acreage of Arizona reservations; commission meetings during the year; projects completed;…

  17. Arizona Commission of Indian Affairs 1974-75 Annual Report.

    Science.gov (United States)

    Arizona Commission of Indian Affairs, Phoenix.

    The Arizona Commission of Indian Affairs 1974-75 Annual Report is issued to inform the Governor, State Legislature, and tribal governments of the proceedings, transactions, findings, and recommendations made by the commission. Included are: (1) a list of commission members, (2) a map showing the Indian reservations in Arizona, (3) a table listing…

  18. 77 FR 4891 - Technical Corrections to Commission Regulations

    Science.gov (United States)

    2012-02-01

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission 18 CFR Parts 1b, 2, 3a, 4, 5, 11, 12, 131, 157, 284, 376, 380, and 385 Technical Corrections to Commission Regulations AGENCY: Federal Energy Regulatory Commission. ACTION: Final...

  19. 28 CFR 524.25 - U.S. Parole Commission.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false U.S. Parole Commission. 524.25 Section 524.25 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INMATE ADMISSION, CLASSIFICATION, AND TRANSFER CLASSIFICATION OF INMATES Youth Corrections Act (YCA) Programs § 524.25 U.S. Parole Commission. The U.S. Parole Commission is the...

  20. 77 FR 24220 - Flight 93 National Memorial Advisory Commission

    Science.gov (United States)

    2012-04-23

    ... National Park Service Flight 93 National Memorial Advisory Commission AGENCY: National Park Service... meeting of the Flight 93 Advisory Commission. DATES: The public meeting of the Advisory Commission will be... the Flight 93 National Memorial Office, 109 West Main Street, Suite 104, Somerset, PA 15501. Agenda...

  1. 75 FR 3488 - Flight 93 National Memorial Advisory Commission

    Science.gov (United States)

    2010-01-21

    ... National Park Service Flight 93 National Memorial Advisory Commission AGENCY: National Park Service. ACTION... meeting of the Flight 93 Advisory Commission. DATES: The public meeting of the Advisory Commission will be... with the Flight 93 Memorial Task Force. Location: The meeting will be held at the Somerset County...

  2. Detection of Dirofilaria immitis in a brown bear (Ursus arctos in Greece

    Directory of Open Access Journals (Sweden)

    Papadopoulos E.

    2017-09-01

    Full Text Available Dirofilaria immitis (canine heartworm is a filarial nematode found in the pulmonary circulation and the heart of susceptible hosts. It represents an important zoonotic vector-borne disease of domestic dogs and several wildlife species. Herein we report for the first time, the finding of Dirofilaria immitis worms in a brown bear killed in a vehicle collision in Northern Greece. The worms were morphologically identified; molecular examination, based on the analysis of the mitochondrial genes 12S (433 bp and CO1 (610 bp, verified the identification by demonstrating 100% similarity to D. immitis specimens deposited in GenBank. Brown bears in Greece occupy habitats that are shared with the potential wild and domestic hosts and the vectors of D. immitis and thus may be particularly susceptible to this parasite. This report contributes to the knowledge of dirofilariosis spread in Europe and on the epidemiological threats that may affect the survival of the endangered brown bear in Greece.

  3. Genomic sequencing of Pleistocene cave bears

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, James P.; Hofreiter, Michael; Smith, Doug; Priest, JamesR.; Rohland, Nadin; Rabeder, Gernot; Krause, Johannes; Detter, J. Chris; Paabo, Svante; Rubin, Edward M.

    2005-04-01

    Despite the information content of genomic DNA, ancient DNA studies to date have largely been limited to amplification of mitochondrial DNA due to technical hurdles such as contamination and degradation of ancient DNAs. In this study, we describe two metagenomic libraries constructed using unamplified DNA extracted from the bones of two 40,000-year-old extinct cave bears. Analysis of {approx}1 Mb of sequence from each library showed that, despite significant microbial contamination, 5.8 percent and 1.1 percent of clones in the libraries contain cave bear inserts, yielding 26,861 bp of cave bear genome sequence. Alignment of this sequence to the dog genome, the closest sequenced genome to cave bear in terms of evolutionary distance, revealed roughly the expected ratio of cave bear exons, repeats and conserved noncoding sequences. Only 0.04 percent of all clones sequenced were derived from contamination with modern human DNA. Comparison of cave bear with orthologous sequences from several modern bear species revealed the evolutionary relationship of these lineages. Using the metagenomic approach described here, we have recovered substantial quantities of mammalian genomic sequence more than twice as old as any previously reported, establishing the feasibility of ancient DNA genomic sequencing programs.

  4. Genetic control of biennial bearing in apple

    Science.gov (United States)

    Guitton, Baptiste; Kelner, Jean-Jacques; Velasco, Riccardo; Gardiner, Susan E.; Chagné, David; Costes, Evelyne

    2012-01-01

    Although flowering in mature fruit trees is recurrent, floral induction can be strongly inhibited by concurrent fruiting, leading to a pattern of irregular fruiting across consecutive years referred to as biennial bearing. The genetic determinants of biennial bearing in apple were investigated using the 114 flowering individuals from an F1 population of 122 genotypes, from a ‘Starkrimson’ (strong biennial bearer)בGranny Smith’ (regular bearer) cross. The number of inflorescences, and the number and the mass of harvested fruit were recorded over 6 years and used to calculate 26 variables and indices quantifying yield, precocity of production, and biennial bearing. Inflorescence traits exhibited the highest genotypic effect, and three quantitative trait loci (QTLs) on linkage group (LG) 4, LG8, and LG10 explained 50% of the phenotypic variability for biennial bearing. Apple orthologues of flowering and hormone-related genes were retrieved from the whole-genome assembly of ‘Golden Delicious’ and their position was compared with QTLs. Four main genomic regions that contain floral integrator genes, meristem identity genes, and gibberellin oxidase genes co-located with QTLs. The results indicated that flowering genes are less likely to be responsible for biennial bearing than hormone-related genes. New hypotheses for the control of biennial bearing emerged from QTL and candidate gene co-locations and suggest the involvement of different physiological processes such as the regulation of flowering genes by hormones. The correlation between tree architecture and biennial bearing is also discussed. PMID:21963613

  5. Grizzly bear diet shifting on reclaimed mines

    Directory of Open Access Journals (Sweden)

    Bogdan Cristescu

    2015-07-01

    Full Text Available Industrial developments and reclamation change habitat, possibly altering large carnivore food base. We monitored the diet of a low-density population of grizzly bears occupying a landscape with open-pit coal mines in Canada. During 2009–2010 we instrumented 10 bears with GPS radiocollars and compared their feeding on reclaimed coal mines and neighboring Rocky Mountains and their foothills. In addition, we compared our data with historical bear diet for the same population collected in 2001–2003, before extensive mine reclamation occurred. Diet on mines (n=331 scats was dominated by non-native forbs and graminoids, while diets in the Foothills and Mountains consisted primarily of ungulates and Hedysarum spp. roots respectively, showing diet shifting with availability. Field visitation of feeding sites (n=234 GPS relocation clusters also showed that ungulates were the main diet component in the Foothills, whereas on reclaimed mines bears were least carnivorous. These differences illustrate a shift to feeding on non-native forbs while comparisons with historical diet reveal emergence of elk as an important bear food. Food resources on reclaimed mines attract bears from wilderness areas and bears may be more adaptable to landscape change than previously thought. The grizzly bear’s ready use of mines cautions the universal view of this species as umbrella indicative of biodiversity.

  6. Leadership of healthcare commissioning networks in England: a mixed-methods study on clinical commissioning groups

    Science.gov (United States)

    Zachariadis, Markos; Oborn, Eivor; Barrett, Michael; Zollinger-Read, Paul

    2013-01-01

    Objective To explore the relational challenges for general practitioner (GP) leaders setting up new network-centric commissioning organisations in the recent health policy reform in England, we use innovation network theory to identify key network leadership practices that facilitate healthcare innovation. Design Mixed-method, multisite and case study research. Setting Six clinical commissioning groups and local clusters in the East of England area, covering in total 208 GPs and 1 662 000 population. Methods Semistructured interviews with 56 lead GPs, practice managers and staff from the local health authorities (primary care trusts, PCT) as well as various healthcare professionals; 21 observations of clinical commissioning group (CCG) board and executive meetings; electronic survey of 58 CCG board members (these included GPs, practice managers, PCT employees, nurses and patient representatives) and subsequent social network analysis. Main outcome measures Collaborative relationships between CCG board members and stakeholders from their healthcare network; clarifying the role of GPs as network leaders; strengths and areas for development of CCGs. Results Drawing upon innovation network theory provides unique insights of the CCG leaders’ activities in establishing best practices and introducing new clinical pathways. In this context we identified three network leadership roles: managing knowledge flows, managing network coherence and managing network stability. Knowledge sharing and effective collaboration among GPs enable network stability and the alignment of CCG objectives with those of the wider health system (network coherence). Even though activities varied between commissioning groups, collaborative initiatives were common. However, there was significant variation among CCGs around the level of engagement with providers, patients and local authorities. Locality (sub) groups played an important role because they linked commissioning decisions with

  7. Leadership of healthcare commissioning networks in England: a mixed-methods study on clinical commissioning groups.

    Science.gov (United States)

    Zachariadis, Markos; Oborn, Eivor; Barrett, Michael; Zollinger-Read, Paul

    2013-01-01

    To explore the relational challenges for general practitioner (GP) leaders setting up new network-centric commissioning organisations in the recent health policy reform in England, we use innovation network theory to identify key network leadership practices that facilitate healthcare innovation. Mixed-method, multisite and case study research. Six clinical commissioning groups and local clusters in the East of England area, covering in total 208 GPs and 1 662 000 population. Semistructured interviews with 56 lead GPs, practice managers and staff from the local health authorities (primary care trusts, PCT) as well as various healthcare professionals; 21 observations of clinical commissioning group (CCG) board and executive meetings; electronic survey of 58 CCG board members (these included GPs, practice managers, PCT employees, nurses and patient representatives) and subsequent social network analysis. Collaborative relationships between CCG board members and stakeholders from their healthcare network; clarifying the role of GPs as network leaders; strengths and areas for development of CCGs. Drawing upon innovation network theory provides unique insights of the CCG leaders' activities in establishing best practices and introducing new clinical pathways. In this context we identified three network leadership roles: managing knowledge flows, managing network coherence and managing network stability. Knowledge sharing and effective collaboration among GPs enable network stability and the alignment of CCG objectives with those of the wider health system (network coherence). Even though activities varied between commissioning groups, collaborative initiatives were common. However, there was significant variation among CCGs around the level of engagement with providers, patients and local authorities. Locality (sub) groups played an important role because they linked commissioning decisions with patient needs and brought the leaders closer to frontline stakeholders

  8. Best management practices in counting urban black bears

    National Research Council Canada - National Science Library

    Jonathan L Fusaro; Mary M Conner; Michael R Conover; Timothy J Taylor; Marc W Kenyon Jr

    2017-01-01

    .... We modified DNA-based CMR for black bear using hair-snares to take into account the small home ranges of urban bears, urban bear behavior, and human safety within Mammoth Lakes, California, USA...

  9. Governing body nurses' experiences of clinical commissioning groups: an observational study of two clinical commissioning groups (CCGs) in England

    OpenAIRE

    Allan, Helen T.; Dixon, Roz; Lee, Gay; Savage, Jan; Tapson, Christine

    2017-01-01

    Clinical commissioning groups (CCGs) were set up under the Health & Social Care Act (2012) in England to commission healthcare services for local communities. Governing body nurses (GBNs) provide nursing leadership to commissioning services on CCGs. Little is known about how nurses function on clinical commissioning groups. We conducted observations of seven formal meetings, three informal observation sessions, and seven interviews from January 2015 to July 2015 in two CCGs in the South of En...

  10. MHC class II DQB diversity in the Japanese black bear, Ursus thibetanus japonicus.

    Science.gov (United States)

    Yasukochi, Yoshiki; Kurosaki, Toshifumi; Yoneda, Masaaki; Koike, Hiroko; Satta, Yoko

    2012-11-29

    The major histocompatibility complex (MHC) genes are one of the most important genetic systems in the vertebrate immune response. The diversity of MHC genes may directly influence the survival of individuals against infectious disease. However, there has been no investigation of MHC diversity in the Asiatic black bear (Ursus thibetanus). Here, we analyzed 270-bp nucleotide sequences of the entire exon 2 region of the MHC DQB gene by using 188 samples from the Japanese black bear (Ursus thibetanus japonicus) from 12 local populations. Among 185 of 188 samples, we identified 44 MHC variants that encoded 31 different amino acid sequences (allotypes) and one putative pseudogene. The phylogenetic analysis suggests that MHC variants detected from the Japanese black bear are derived from the DQB locus. One of the 31 DQB allotypes, Urth-DQB*01, was found to be common to all local populations. Moreover, this allotype was shared between the black bear on the Asian continent and the Japanese black bear, suggesting that Urth-DQB*01 might have been maintained in the ancestral black bear population for at least 300,000 years. Our findings, from calculating the ratio of non-synonymous to synonymous substitutions, indicate that balancing selection has maintained genetic variation of peptide-binding residues at the DQB locus of the Japanese black bear. From examination of genotype frequencies among local populations, we observed a considerably lower level of observed heterozygosity than expected. The low level of observed heterozygosity suggests that genetic drift reduced DQB diversity in the Japanese black bear due to a bottleneck event at the population or species level. The decline of DQB diversity might have been accelerated by the loss of rare variants that have been maintained by negative frequency-dependent selection. Nevertheless, DQB diversity of the black bear appears to be relatively high compared with some other endangered mammalian species. This result suggests that

  11. The ATLAS Trigger Commissioning with cosmic rays

    CERN Document Server

    Abolins, M; Adragna, P; Aielli, G; Aleksandrov, E; Aleksandrov, I; Aloisio, A; Alviggi, M G; Amorim, A; Anderson, K; Andrei, V; Anduaga, X; Antonelli, S; Aracena, I; Ask, S; Asquith, L; Avolio, G; Backlund, S; Badescu, E; Bahat Treidel, O; Baines, J; Barnett, B M; Barria, P; Bartoldus, R; Batreanu, S; Bauss, B; Beck, H P; Bee, C; Bell, P; Bell, W H; Bellagamba, L; Bellomo, M; Ben Ami, S; Bendel, M; Benhammou, Ya; Benslama, K; Berge, D; Berger, N; Berry, T; Bianco, M; Biglietti, M; Blair, R R; Bogaerts, A; Bohm, C; Bold, T; Booth, J R A; Boscherini, D; Bosman, M; Boyd, J; Brawn, I P; Brelier, B; Bressler, S; Bruni, A; Bruni, G; Buda, S; Burckhart-Chromek, D; Buttar, C; Camarri, P; Campanelli, M; Canale, V; Caprini, M; Caracinha, D; Cardarelli, R; Carlino, G; Casadei, D; Casado, M P; Cataldi, G; Cerri, A; Charlton, D G; Chiodini, G; Ciapetti, G; Cimino, D; Ciobotaru, M; Clements, D; Coccaro, A; Coluccia, M R; Conde-Muíño, P; Constantin, S; Conventi, F; Corso-Radu, A; Costa, M J; Coura Torres, R; Cranfield, R; Cranmer, K; Crone, G; Curtis, C J; Dam, M; Damazio, D; Davis, A O; Dawson, I; Dawson, J; De Almeida Simoes, J; De Cecco, S; De Pedis, D; De Santo, A; DeAsmundis, R; DellaPietra, M; DellaVolpe, D; Delsart, P A; Demers, S; Demirkoz, B; Di Mattia, A; Di Ciaccio, A; Di Girolamo, A; Dionisi, C; Djilkibaev, R; Dobinson, Robert W; Dobson, M; Dogaru, M; Dotti, A; Dova, M; Drake, G; Dufour, M -A; Eckweiler, S; Ehrenfeld, W; Eifert, T; Eisenhandler, E F; Ellis, Nick; Emeliyanov, D; Enoque Ferreira de Lima, D; Ermoline, Y; Eschrich, I; Etzion, E; Facius, K; Falciano, S; Farthouat, P; Faulkner, P J W F; Feng, E; Ferland, J; Ferrari, R; Ferrer, M L; Fischer, G; Fonseca-Martin, T; Francis, D; Fukunaga, C; Föhlisch, F; Gadomski, S; Garitaonandia Elejabarrieta, H; Gaudio, G; Gaumer, O; Gee, C N P; George, S; Geweniger, C; Giagu, S; Gillman, A R; Giusti, P; Goncalo, R; Gorini, B; Gorini, E; Gowdy, S; Grabowska-Bold, I; Grancagnolo, F; Grancagnolo, S; Green, B; Galllno, P; Haas, S; Haberichter, W; Hadavand, H; Haeberli, C; Haller, J; Hamilton, A; Hanke, P; Hansen, J R; Hasegawa, Y; Hauschild, M; Hauser, R; Head, S; Hellman, S; Hidvegi, A; Hillier, S J; Höcker, A; Hrynóva, T; Hughes-Jones, R; Huston, J; Iacobucci, G; Idarraga, J; Iengo, P; Igonkina, O; Ikeno, M; Inada, M; Ishino, M; Iwasaki, H; Izzo, V; Jain, V; Johansen, M; Johns, K; Joos, M; Kadosaka, T; Kajomovitz, E; Kama, S; Kanaya, N; Kawagoe, K; Kawamoto, T; Kazarov, A; Kehoe, R; Khoriauli, G; Kieft, G; Kilvington, G; Kirk, J; Kiyamura, H; Klofver, P; Klous, S; Kluge, E E; Kobayashi, T; Kolos, S; Kono, T; Konstantinidis, N; Korcyl, K; Kordas, K; Kotov, V; Krasznahorkay, A; Kubota, T; Kugel, A; Kuhn, D; Kurashige, H; Kurasige, H; Kuwabara, T; Kwee, R; Landon, M; Lankford, A; LeCompte, T; Leahu, L; Leahu, M; Ledroit, F; Lehmann-Miotto, G; Lei, X; Lellouch, D; Lendermann, V; Levinson, L; Leyton, M; Li, S; Liberti, B; Lifshitz, R; Lim, H; Lohse, T; Losada, M; Luci, C; Luminari, L; Lupu, N; Mahboubi, K; Mahout, G; Mapelli, L; Marchese, F; Martin, B; Martin, B T; Martínez, A; Marzano, F; Masik, J; McMahon, T; McPherson, R; Medinnis, M; Meessen, C; Meier, K; Meirosu, C; Messina, A; Migliaccio, A; Mikenberg, G; Mincer, A; Mineev, M; Misiejuk, A; Mönig, K; Monticelli, F; Moraes, A; Moreno, D; Morettini, P; Murillo Garcia, R; Nagano, K; Nagasaka, Y; Negri, A; Némethy, P; Neusiedl, A; Nisati, A; Niwa, T; Nomachi, M; Nomoto, H; Nozaki, M; Nozicka, M; Ochi, A; Ohm, C; Okumura, Y; Omachi, C; Osculati, B; Oshita, H; Osuna, C; Padilla, C; Panikashvili, N; Parodi, F; Pasqualucci, E; Pastore, F; Patricelli, S; Pauly, T; Pectu, M; Perantoni, M; Perera, V; Perera, V J O; Pérez, E; Pérez-Réale, V; Perrino, R; Pessoa Lima Junior, H; Petersen, J; Petrolo, E; Piegaia, R; Pilcher, J E; Pinto, F; Pinzon, G; Polini, A; Pope, B; Potter, C; Prieur, D P F; Primavera, M; Qian, W; Radescu, V; Rajagopalan, S; Renkel, P; Rescigno, M; Rieke, S; Risler, C; Riu, I; Robertson, S; Roda, C; Rodríguez, D; Rogriquez, Y; Roich, A; Romeo, G; Rosati, S; Ryabov, Yu; Ryan, P; Rühr, F; Sakamoto, H; Salamon, A; Salvatore, D; Sankey, D P C; Santamarina, C; Santamarina-Rios, C; Santonico, R; Sasaki, O; Scannicchio, D; Scannicchio, D A; Schiavi, C; Schlereth, J L; Schmitt, K; Scholtes, I; Schooltz, D; Schuler, G; Schultz-Coulon, H -C; Schäfer, U; Scott, W; Segura, E; Sekhniaidze, G; Shimbo, N; Sidoti, A; Silva, L; Silverstein, S; Siragusa, G; Sivoklokov, S; Sloper, J E; Smizanska, M; Solfaroli, E; Soloviev, I; Soluk, R; Spagnolo, S; Spila, F; Spiwoks, R; Staley, R J; Stamen, R; Stancu, S; Steinberg, P; Stelzer, J; Stradling, A; Strom, D; Strong, J; Su, D; Sugaya, Y; Sugimoto, T; Sushkov, S; Sutton, M; Szymocha, T; Takahashi, Y; Takeda, H; Takeshita, T; Tanaka, S; Tapprogge, S; Tarem, S; Tarem, Z; Teixeira-Dias, P; Thomas, J P; Tokoshuku, K; Tomoto, M; Torrence, E; Touchard, F; Trefzger, T; Tremblet, L; Tripiana, M; Usai, G; Vachon, B; Vandelli, W; Vari, R; Veneziano, S; Ventura, A; Vercesi, V; Vermeulen, J; Von Der Schmitt, J; Wang, M; Watkins, P M; Watson, A; Weber, P; Wengler, T; Werner, P; Wheeler-Ellis, S; Wickens, F; Wiedenmann, W; Wielers, M; Wilkens, H; Winklmeier, F; Woerling, E E; Wu, S -L; Wu, X; Xella, S; Yamaguchi, Y; Yamazaki, Y; Yasu, Y; Yu, M; Zanello, L; Zema, F; Zhang, J; Zhao, L; Zobernig, H; De Seixas, J M; Dos Anjos, A; Zur Nedden, M; Ozcan, E; Ünel, G; International Conference on Computing in High Energy and Nuclear Physics

    2008-01-01

    The ATLAS detector at CERN's LHC will be exposed to proton-proton collisions from beams crossing at 40 MHz. At the design luminosity there are roughly 23 collisions per bunch crossing. ATLAS has designed a three-level trigger system to select potentially interesting events. The first-level trigger, implemented in custom-built electronics, reduces the incoming rate to less than 100 kHz with a total latency of less than 2.5$\\mu$s. The next two trigger levels run in software on commercial PC farms. They reduce the output rate to 100-200 Hz. In preparation for collision data-taking which is scheduled to commence in May 2008, several cosmic-ray commissioning runs have been performed. Among the first sub-detectors available for commissioning runs are parts of the barrel muon detector including the RPC detectors that are used in the first-level trigger. Data have been taken with a full slice of the muon trigger and readout chain, from the detectors in one sector of the RPC system, to the second-level trigger algorit...

  12. Commissioning of the ATLAS Liquid Argon Calorimeter

    CERN Document Server

    Gibson, A; The ATLAS collaboration

    2009-01-01

    The Liquid Argon calorimeter (LAr) is one of the main sub-detectors in the ATLAS experiment at the LHC. It provides precision measurements of electrons, photons, jets and missing transverse energy produced in the LHC pp collisions. The LAr calorimeter has been installed in the ATLAS cavern and filled with liquid argon since 2006. The electronic calibration of the readout system, a critical system for precision measurements, has been continuously exercised in the commissioning phase, resulting in a fully commissioned calorimeter with its readout and a small number of problematic channels. A total of only 0.02% of the read out channels are dead beyond repair and 0.4% need special treatment for calibration. Throughout the last two years a large amount of calibration data has been collected. Cosmic muon data, first triggered via specially developed trigger boards on the LVL1 output of the Tile calorimeter and later with the standard ATLAS LVL1 calorimeter trigger, have been recorded at various stages of commissio...

  13. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    L. Malgeri

    2011-01-01

    As the technical interventions were finishing up and services restored at P5 we started central operations again in 2011. We started operations with a reduced shift crew, Shift leader and DCS shifter, on 24th January. We had a first mid-week global run on 2nd and 3rd February followed by cosmic data-taking between 10th and 20th February. Due to delays with cooling for the strip tracker the useful cosmic data-taking with the strip tracker was reduced to about four days. On 20th February, the LHC started beam commissioning, and cosmic data-taking with the full CMS detector was stopped. The machine availability has been much higher during the 2011 beam commissioning than during the comparable time period in 2010. This has given us few opportunities to turn on the tracker for further cosmic data-taking. Many changes and upgrades were performed during the winter shutdown. Among them was an upgrade to running the central DAQ on 64 bit. All of these upgrades have now b...

  14. Commissioning the EMMA spectrometer at TRIUMF

    Science.gov (United States)

    Esker, Nicholas; Davids, Barry; Alcorta, Martin; Hudson, Kevan; Williams, Matthew

    2017-09-01

    The ElectroMagnetic Mass Analyser (EMMA) is a new experimental facility at TRIUMF. Located after the ISAC-II accelerator, EMMA is a symmetric QQEDEQQ-type mass spectrometer capable of separating the recoiling nuclear reaction products from the beam. With the low emittance radioactive beams delivered from ISAC-II at energies up to at least 6.5 A MeV, EMMA is designed for fusion evaporation and transfer reactions of interest in nuclear structure and astrophysics studies. A vacuum mode separator, EMMA disperses ions according to mass/charge in the focal plane. During a successful commissioning run in Dec. 2016, the dispersion and resolving power were measured and found to agree with ion optical calculations. In the future, cross section measurements and decay spectroscopy studies will be performed using a parallel grid avalanche counter, Si implantation detectors, and external high purity Ge detectors at the focal plane. When coupled with the TIGRESS γ-ray detector array, in-beam spectroscopy at the target will also be available. Today, we present the current status of the EMMA mass spectrometer as it continues to undergo commissioning and begin its experimental life.

  15. ATLAS Inner Detector: Commissioning with Cosmics Data

    CERN Document Server

    The ATLAS collaboration

    2009-01-01

    The ATLAS experiment at the CERN Large Hadron Collider (LHC) has started taking data last autumn with the inauguration of the LHC. Determination of vertex position and charged particle tracks is performed in the Inner Detector which consists of pixel and microstrip Silicon sensors and transition radiation tubes. In this talk construction and commissioning of these three detectors will be presented. The Pixel Detector is the innermost detector of the ATLAS experiment with approx. 80 million readout channels. After connection of cooling and services and verification of their operation the ATLAS Pixel Detector is now in the final stage of its commissioning phase. Prior to the first beams expected in Autumn 2009, a full characterization of the detector is performed. The SemiConductor Tracker (SCT) is made up from silicon micro-strip detectors processed in the planar p-in-n technology. Sensors are assembled into 4000 modules with 6 million readout channels. The completed SCT detector was operated for many months u...

  16. Linac4 chopper line commissioning strategy

    CERN Document Server

    Bellodi, G; Lombardi, A M; Posocco, P A; Sargsyan, E

    2010-01-01

    The report outlines the strategy for beam-based commissioning of the Linac4 3 MeV chopper line as currently scheduled to start in the second half of 2011 in the Test Stand Area. A dedicated temporary diagnostics test bench will complement the measurement devices foreseen for permanent installation in the chopper line. A commissioning procedure is set out as a series of consecutive phases, each one supposed to meet a well- defined milestone in the path to fully characterise the beam-line. Specific set-ups for each stage are defined in terms of beam characteristics, machine settings and diagnostics used. Operational guidelines are given and expected results at the relative points of measurements are shown for simulated scenarios (on the basis of multi-particle tracking studies carried out with the codes PATH and TRACEWin). These are then interpreted in the light of the resolution limits of the available diagnostics instruments to assess the precision reach on individual measurements and the feasibility of techn...

  17. Uncertainties in forecasting the response of polar bears to global climate change

    Science.gov (United States)

    Douglas, David C.; Atwood, Todd C.; Butterworth, Andy

    2017-01-01

    Several sources of uncertainty affect how precisely the future status of polar bears (Ursus maritimus) can be forecasted. Foremost are unknowns about the future levels of global greenhouse gas emissions, which could range from an unabated increase to an aggressively mitigated reduction. Uncertainties also arise because different climate models project different amounts and rates of future warming (and sea ice loss)—even for the same emission scenario. There are also uncertainties about how global warming could affect the Arctic Ocean’s food web, so even if climate models project the presence of sea ice in the future, the availability of polar bear prey is not guaranteed. Under a worst-case emission scenario in which rates of greenhouse gas emissions continue to rise unabated to century’s end, the uncertainties about polar bear status center on a potential for extinction. If the species were to persist, it would likely be restricted to a high-latitude refugium in northern Canada and Greenland—assuming a food web also existed with enough accessible prey to fuel weight gains for surviving onshore during the most extreme years of summer ice melt. On the other hand, if emissions were to be aggressively mitigated at the levels proposed in the Paris Climate Agreement, healthy polar bear populations would probably continue to occupy all but the most southern areas of their contemporary summer range. While polar bears have survived previous warming phases—which indicate some resiliency to the loss of sea ice habitat—what is certain is that the present pace of warming is unprecedented and will increasingly expose polar bears to historically novel stressors.

  18. Microeconomic analysis of military aircraft bearing restoration

    Science.gov (United States)

    Hein, G. F.

    1976-01-01

    The risk and cost of a bearing restoration by grinding program was analyzed. A microeconomic impact analysis was performed. The annual cost savings to U.S. Army aviation is approximately $950,000.00 for three engines and three transmissions. The capital value over an indefinite life is approximately ten million dollars. The annual cost savings for U.S. Air Force engines is approximately $313,000.00 with a capital value of approximately 3.1 million dollars. The program will result in the government obtaining bearings at lower costs at equivalent reliability. The bearing industry can recover lost profits during a period of reduced demand and higher costs.

  19. Commissioning of intensity modulated neutron radiotherapy (IMNRT).

    Science.gov (United States)

    Burmeister, Jay; Spink, Robyn; Liang, Liang; Bossenberger, Todd; Halford, Robert; Brandon, John; Delauter, Jonathan; Snyder, Michael

    2013-02-01

    Intensity modulated neutron radiotherapy (IMNRT) has been developed using inhouse treatment planning and delivery systems at the Karmanos Cancer Center∕Wayne State University Fast Neutron Therapy facility. The process of commissioning IMNRT for clinical use is presented here. Results of commissioning tests are provided including validation measurements using representative patient plans as well as those from the TG-119 test suite. IMNRT plans were created using the Varian Eclipse optimization algorithm and an inhouse planning system for calculation of neutron dose distributions. Tissue equivalent ionization chambers and an ionization chamber array were used for point dose and planar dose distribution comparisons with calculated values. Validation plans were delivered to water and virtual water phantoms using TG-119 measurement points and evaluation techniques. Photon and neutron doses were evaluated both inside and outside the target volume for a typical IMNRT plan to determine effects of intensity modulation on the photon dose component. Monitor unit linearity and effects of beam current and gantry angle on output were investigated, and an independent validation of neutron dosimetry was obtained. While IMNRT plan quality is superior to conventional fast neutron therapy plans for clinical sites such as prostate and head and neck, it is inferior to photon IMRT for most TG-119 planning goals, particularly for complex cases. This results significantly from current limitations on the number of segments. Measured and calculated doses for 11 representative plans (six prostate∕five head and neck) agreed to within -0.8 ± 1.4% and 5.0 ± 6.0% within and outside the target, respectively. Nearly all (22∕24) ion chamber point measurements in the two phantom arrangements were within the respective confidence intervals for the quantity [(measured-planned)∕prescription dose] derived in TG-119. Mean differences for all measurements were 0.5% (max = 7.0%) and 1.4% (max = 4

  20. Conical Magnetic Bearing Development and Magnetic Bearing Testing for Extreme Temperature Environments

    Science.gov (United States)

    Keith, Theo G., Jr.; Jansen, Mark

    2004-01-01

    The main proposed research of this grant were: to design a high-temperature, conical magnetic bearing facility, to test the high-temperature, radial magnetic bearing facility to higher speeds, to investigate different backup bearing designs and materials, to retrofit the high-temperature test facility with a magnetic thrust bearing, to evaluate test bearings at various conditions, and test several lubricants using a spiral orbit tribometer. A high-temperature, conical magnetic bearing facility has been fully developed using Solidworks. The facility can reuse many of the parts of the current high-temperature, radial magnetic bearing, helping to reduce overall build costs. The facility has the ability to measure bearing force capacity in the X, Y, and Z directions through a novel bearing mounting design. The high temperature coils and laminations, a main component of the facility, are based upon the current radial design and can be fabricated at Texas A&M University. The coil design was highly successful in the radial magnetic bearing. Vendors were contacted about fabrication of the high temperature lamination stack. Stress analysis was done on the laminations. Some of the components were procured, but due to budget cuts, the facility build up was stopped.

  1. Reduced body size and cub recruitment in polar bears associated with sea ice decline

    Science.gov (United States)

    Rode, K.D.; Amstrup, Steven C.; Regehr, E.V.

    2010-01-01

    Rates of reproduction and survival are dependent upon adequate body size and condition of individuals. Declines in size and condition have provided early indicators of population decline in polar bears (Ursus maritimus) near the southern extreme of their range. We tested whether patterns in body size, condition, and cub recruitment of polar bears in the southern Beaufort Sea of Alaska were related to the availability of preferred sea ice habitats and whether these measures and habitat availability exhibited trends over time, between 1982 and 2006. The mean skull size and body length of all polar bears over three years of age declined over time, corresponding with long-term declines in the spatial and temporal availability of sea ice habitat. Body size of young, growing bears declined over time and was smaller after years when sea ice availability was reduced. Reduced litter mass and numbers of yearlings per female following years with lower availability of optimal sea ice habitat, suggest reduced reproductive output and juvenile survival. These results, based on analysis of a longterm data set, suggest that declining sea ice is associated with nutritional limitations that reduced body size and reproduction in this population. ?? 2010 by the Ecological Society of America.

  2. Reduced body size and cub recruitment in polar bears associated with sea ice decline.

    Science.gov (United States)

    Rode, Karyn D; Amstrup, Steven C; Regehr, Eric V

    2010-04-01

    Rates of reproduction and survival are dependent upon adequate body size and condition of individuals. Declines in size and condition have provided early indicators of population decline in polar bears (Ursus maritimus) near the southern extreme of their range. We tested whether patterns in body size, condition, and cub recruitment of polar bears in the southern Beaufort Sea of Alaska were related to the availability of preferred sea ice habitats and whether these measures and habitat availability exhibited trends over time, between 1982 and 2006. The mean skull size and body length of all polar bears over three years of age declined over time, corresponding with long-term declines in the spatial and temporal availability of sea ice habitat. Body size of young, growing bears declined over time and was smaller after years when sea ice availability was reduced. Reduced litter mass and numbers of yearlings per female following years with lower availability of optimal sea ice habitat, suggest reduced reproductive output and juvenile survival. These results, based on analysis of a long-term data set, suggest that declining sea ice is associated with nutritional limitations that reduced body size and reproduction in this population.

  3. First Operating Results of a Dynamic Gas Bearing Turbine in AN Industrial Hydrogen Liquefier

    Science.gov (United States)

    Bischoff, S.; Decker, L.

    2010-04-01

    Hydrogen has been brought into focus of industry and public since fossil fuels are depleting and costs are increasing dramatically. Beside these issues new high-tech processes in the industry are in need for hydrogen at ultra pure quality. To achieve these requirements and for efficient transportation, hydrogen is liquefied in industrial plants. Linde Gas has commissioned a new 5.5 TPD Hydrogen liquefier in Leuna, Germany, which has been engineered and supplied by Linde Kryotechnik. One of the four expansion turbines installed in the liquefaction process is equipped with dynamic gas bearings. Several design features and operational characteristics of this application will be discussed. The presentation will include results of efficiency and operational reliability that have been determined from performance tests. The advantages of the Linde dynamic gas bearing turbine for future use in hydrogen liquefaction plants will be shown.

  4. Comparison of High-Flexion Fixed-Bearing and High-Flexion Mobile-Bearing Total Knee Arthroplasties-A Prospective Randomized Study.

    Science.gov (United States)

    Kim, Young-Hoo; Park, Jang-Won; Kim, Jun-Shik

    2017-08-01

    There is none, to our knowledge, about comparison of high-flexion fixed-bearing and high-flexion mobile-bearing total knee arthroplasties (TKAs) in the same patients. The purpose of this study was to determine whether clinical results; radiographic and computed tomographic scan results; and the survival rate of a high-flexion mobile-bearing TKA is better than that of a high-flexion fixed-bearing TKA. The present study consisted of 92 patients (184 knees) who underwent same-day bilateral TKA. Of those, 17 were men and 75 were women. The mean age at the time of index arthroplasty was 61.5 ± 8.3 years (range 52-65 years). The mean body mass index was 26.2 ± 3.3 kg/m(2) (range 23-34 kg/m(2)). The mean follow-up was 11.2 years (range 10-12 years). The Knee Society knee scores (93 vs 92 points; P = .531) and function scores (80 vs 80 points; P = 1.000), WOMAC scores (14 vs 15 points; P = .972), and UCLA activity scores (6 vs 6 points; P = 1.000) were not different between the 2 groups at 12 years follow-up. There were no differences in any radiographic and CT scan parameters between the 2 groups. Kaplan-Meier survivorship of the TKA component was 98% (95% confidence interval, 93-100) in the high-flexion fixed-bearing TKA group and 99% (95% confidence interval, 94-100) in the high-flexion mobile-bearing TKA group 12 years after the operation. We found no benefit to mobile-bearing TKA in terms of pain, function, radiographic and CT scan results, and survivorship. Longer-term follow-up is necessary to prove the benefit of the high-flexion mobile-bearing TKA over the high-flexion fixed-bearing TKA. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Water fleas require microbiota for survival, growth and reproduction.

    OpenAIRE

    Sison-Mangus Marilou P; Mushegian Alexandra A; Ebert Dieter

    2015-01-01

    Microbiota have diverse roles in the functioning of their hosts; experiments using model organisms have enabled investigations into these functions. In the model crustacean Daphnia little knowledge exists about the effect of microbiota on host well being. We assessed the effect of microbiota on Daphnia magna by experimentally depriving animals of their microbiota and comparing their growth survival and fecundity to that of their bacteria bearing counterparts. We tested Daphnia coming from bot...

  6. Water fleas require microbiota for survival, growth and reproduction

    OpenAIRE

    Sison-Mangus, Marilou P.; Mushegian, Alexandra A; Ebert, Dieter

    2014-01-01

    Microbiota have diverse roles in the functioning of their hosts; experiments using model organisms have enabled investigations into these functions. In the model crustacean Daphnia, little knowledge exists about the effect of microbiota on host well being. We assessed the effect of microbiota on Daphnia magna by experimentally depriving animals of their microbiota and comparing their growth, survival and fecundity to that of their bacteria-bearing counterparts. We tested Daphnia coming from b...

  7. Vibration Characteristics of Hydrodynamic Fluid Film Pocket Journal Bearings

    Directory of Open Access Journals (Sweden)

    N. S. Feng

    2010-01-01

    Full Text Available Theoretical analyses of hydrodynamic fluid film bearings with different bearing profiles rely on solutions of the Reynolds equation. This paper presents an approach used for analysing the so-called pocket bearings formed from a combination of offset circular bearing profiles. The results show that the variation of the dynamic bearing characteristics with different load inclinations for the pocket bearings is less than that for the elliptic bearing counterpart. It is shown that the natural frequencies as well as the critical speeds, and hence the vibrational behaviour, can also be significantly different for an industrial rotor supported by the different bearings.

  8. Myelopotentiating effect of curcumin in tumor-bearing host: Role of bone marrow resident macrophages

    Energy Technology Data Exchange (ETDEWEB)

    Vishvakarma, Naveen Kumar; Kumar, Anjani; Kumar, Ajay; Kant, Shiva [School of Biotechnology, Banaras Hindu University, Varanasi-221 005, U.P. (India); Bharti, Alok Chandra [Division of Molecular Oncology, Institute of Cytology and Preventive Oncology, Noida, UP (India); Singh, Sukh Mahendra, E-mail: sukhmahendrasingh@yahoo.com [School of Biotechnology, Banaras Hindu University, Varanasi-221 005, U.P. (India)

    2012-08-15

    The present investigation was undertaken to study if curcumin, which is recognized for its potential as an antineoplastic and immunopotentiating agent, can also influence the process of myelopoiesis in a tumor-bearing host. Administration of curcumin to tumor-bearing host augmented count of bone marrow cell (BMC) accompanied by an up-regulated BMC survival and a declined induction of apoptosis. Curcumin administration modulated expression of cell survival regulatory molecules: Bcl2, p53, caspase-activated DNase (CAD) and p53-upregulated modulator of apoptosis (PUMA) along with enhanced expression of genes of receptors for M-CSF and GM-CSF in BMC. The BMC harvested from curcumin-administered hosts showed an up-regulated colony forming ability with predominant differentiation into bone marrow-derived macrophages (BMDM), responsive for activation to tumoricidal state. The number of F4/80 positive bone marrow resident macrophages (BMM), showing an augmented expression of M-CSF, was also augmented in the bone marrow of curcumin-administered host. In vitro reconstitution experiments indicated that only BMM of curcumin-administered hosts, but not in vitro curcumin-exposed BMM, augmented BMC survival. It suggests that curcumin-dependent modulation of BMM is of indirect nature. Such prosurvival action of curcumin is associated with altered T{sub H1}/T{sub H2} cytokine balance in serum. Augmented level of serum-borne IFN-γ was found to mediate modulation of BMM to produce enhanced amount of monokines (IL-1, IL-6, TNF-α), which are suggested to augment the BMC survival. Taken together the present investigation indicates that curcumin can potentiate myelopoiesis in a tumor-bearing host, which may have implications in its therapeutic utility. Highlights: ► Curcumin augments myelopoiesis in tumor-bearing host. ► Bone marrow resident macrophages mediate curcumin-dependent augmented myelopoiesis. ► Serum borne cytokine are implicated in modulation of bone marrow resident

  9. 75 FR 27981 - Codex Alimentarius Commission: Meeting of the Codex Alimentarius Commission

    Science.gov (United States)

    2010-05-19

    ... governments, Codex seeks to protect the health of consumers and ensure fair practices in food trade; and... Listserv, a free electronic mail subscription service for industry, trade groups, consumer interest groups... Food Safety and Inspection Service Codex Alimentarius Commission: Meeting of the Codex Alimentarius...

  10. Truth Commissions, Education, and Positive Peace: An Analysis of Truth Commission Final Reports (1980-2015)

    Science.gov (United States)

    Paulson, Julia; Bellino, Michelle J.

    2017-01-01

    Transitional justice and education both occupy increasingly prominent space on the international peacebuilding agenda, though less is known about the ways they might reinforce one another to contribute towards peace. This paper presents a cross-national analysis of truth commission (TC) reports spanning 1980-2015, exploring the range of…

  11. Survey commission of the Manche center; Commission de surveillance du Centre de la Manche

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-15

    The subjects discussed during the Survey commission of the storage center of the Manche CSCM, held in october 2001, are presented in this document. They deal with the site survey, the maintenance facilities realized on this installations, the tritium survey in the water and the CSCM operating. (A.L.B.)

  12. Predicting climate change impacts on polar bear litter size.

    Science.gov (United States)

    Molnár, Péter K; Derocher, Andrew E; Klanjscek, Tin; Lewis, Mark A

    2011-02-08

    Predicting the ecological impacts of climate warming is critical for species conservation. Incorporating future warming into population models, however, is challenging because reproduction and survival cannot be measured for yet unobserved environmental conditions. In this study, we use mechanistic energy budget models and data obtainable under current conditions to predict polar bear litter size under future conditions. In western Hudson Bay, we predict climate warming-induced litter size declines that jeopardize population viability: ∼28% of pregnant females failed to reproduce for energetic reasons during the early 1990s, but 40-73% could fail if spring sea ice break-up occurs 1 month earlier than during the 1990s, and 55-100% if break-up occurs 2 months earlier. Simultaneously, mean litter size would decrease by 22-67% and 44-100%, respectively. The expected timeline for these declines varies with climate-model-specific sea ice predictions. Similar litter size declines may occur in over one-third of the global polar bear population.

  13. Molecular phylogeny and SNP variation of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) derived from genome sequences.

    Science.gov (United States)

    Cronin, Matthew A; Rincon, Gonzalo; Meredith, Robert W; MacNeil, Michael D; Islas-Trejo, Alma; Cánovas, Angela; Medrano, Juan F

    2014-01-01

    We assessed the relationships of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) with high throughput genomic sequencing data with an average coverage of 25× for each species. A total of 1.4 billion 100-bp paired-end reads were assembled using the polar bear and annotated giant panda (Ailuropoda melanoleuca) genome sequences as references. We identified 13.8 million single nucleotide polymorphisms (SNP) in the 3 species aligned to the polar bear genome. These data indicate that polar bears and brown bears share more SNP with each other than either does with black bears. Concatenation and coalescence-based analysis of consensus sequences of approximately 1 million base pairs of ultraconserved elements in the nuclear genome resulted in a phylogeny with black bears as the sister group to brown and polar bears, and all brown bears are in a separate clade from polar bears. Genotypes for 162 SNP loci of 336 bears from Alaska and Montana showed that the species are genetically differentiated and there is geographic population structure of brown and black bears but not polar bears.

  14. Vapor Cavitation in Dynamically Loaded Journal Bearings

    Science.gov (United States)

    Jacobson, B. O.; Hamrock, B. J.

    1983-01-01

    High speed motion camera experiments were performed on dynamically loaded journal bearings. The length to diameter ratio of the bearing, the speed of the roller and the tube, the surface material of the roller, and the static and dynamic eccentricity of the bearing were varied. One hundred and thirty-four cases were filmed. The occurrence of vapor cavitation was clearly evident in the films and figures presented. Vapor cavitation was found to occur when the tensile stress applied to the oil exceeded the tensile strength of the oil or the binding of the oil to the surface. The physical situation in which vapor cavitation occurs is during the squeezing and sliding motion within a bearing. Besides being able to accurately capture the vapor cavitation on film, an analysis of the formation and collapse of the cavitation bubbles and characteristics of the bubble content are presented.

  15. Ceramic Rail-Race Ball Bearings

    Science.gov (United States)

    Balzer, Mark A.; Mungas, Greg S.; Peters, Gregory H.

    2010-01-01

    Non-lubricated ball bearings featuring rail races have been proposed for use in mechanisms that are required to function in the presence of mineral dust particles in very low-pressure, dry environments with extended life. Like a conventional ball bearing, the proposed bearing would include an inner and an outer ring separated by balls in rolling contact with the races. However, unlike a conventional ball bearing, the balls would not roll in semi-circular or gothic arch race grooves in the rings: instead, the races would be shaped to form two or more rails (see figure). During operation, the motion of the balls would push dust particles into the spaces between the rails where the particles could not generate rolling resistance for the balls

  16. Polar bear research in Alaska, spring 1981

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — An investigation of the ecology and population dynamics of Alaskan polar bears has continued since 1967. As part of that program, U.S. Fish and Wildlife Service...

  17. Polar bear research in Alaska, spring 1982

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — An investigation of the ecology and population dynamics of Alaskan polar bears has continued since 1967. As part of that program, U.S. Fish and Wildlife Service...

  18. Cavitation Peening of Aerospace Bearings Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High-value bearings are a critical part of the safety, reliability, cost and performance of modern aircraft. A typical passenger jet will have 100 to 175 high-valve...

  19. Bear Lake-Minidoka - Phragmites Control

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Bear Lake: Phragmites patches were sprayed on the refuge & north of the lake proper. Minidoka: patches along the Snake River & Lake Walcott were treated with...

  20. AX-5 space suit bearing torque investigation

    Science.gov (United States)

    Loewenthal, Stuart; Vykukal, Vic; Mackendrick, Robert; Culbertson, Philip, Jr.

    1990-01-01

    The symptoms and eventual resolution of a torque increase problem occurring with ball bearings in the joints of the AX-5 space suit are described. Starting torques that rose 5 to 10 times initial levels were observed in crew evaluation tests of the suit in a zero-g water tank. This bearing problem was identified as a blocking torque anomaly, observed previously in oscillatory gimbal bearings. A large matrix of lubricants, ball separator designs and materials were evaluated. None of these combinations showed sufficient tolerance to lubricant washout when repeatedly cycled in water. The problem was resolved by retrofitting a pressure compensated, water exclusion seal to the outboard side of the bearing cavity. The symptoms and possible remedies to blocking are discussed.

  1. LIGHT-WEIGHT LOAD-BEARING STRUCTURE

    DEFF Research Database (Denmark)

    2009-01-01

    The invention relates to a light-weight load-bearing structure (1) with optimized compression zone (2), where along one or more compression zones (2) in the structure (1) to be cast a core (3) of strong concrete is provided, which core (3) is surrounded by concrete of less strength (4) compared...... to the core (3) of strong concrete. The invention also relates to a method of casting of light-weight load-bearing structures (1) with optimized compression zone (2) where one or more channels, grooves, ducts, pipes and/or hoses (5) formed in the load-bearing structure (1) serves as moulds for moulding one...... or more cores (3) of strong concrete in the light-weight load-bearing structure (1)....

  2. Progress report: brown bear studies - 1984

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Forty-four brown bears (22 adult female, 22 offspring) were captured in the Ayakulik River, Sturgeon River, and Frazer Lake drainages of Kodiak Island in July, 1983....

  3. Silicon Nitride Bearings for Total Joint Arthroplasty

    National Research Council Canada - National Science Library

    McEntire, Bryan; Lakshminarayanan, Ramaswamy; Ray, Darin; Clarke, Ian; Puppulin, Leonardo; Pezzotti, Giuseppe

    2016-01-01

      The articulation performance of silicon nitride against conventional and highly cross-linked polyethylene, as well as for self-mated silicon nitride bearings, was examined in a series of standard hip simulation studies...

  4. Commentary: Curbing the Nuisance Bear's Garbage Appetite

    OpenAIRE

    Barce, George W.

    2017-01-01

    Since the early 1900S, the human population in the United States has more than tripled. Likewise, human interactions with wildlife have also increased exponentially (Conover 1995). Within the range of the American black bear (Ursus americanus), wildlife officials and land managers are often called upon to deal with nuisance bears. The Fall 2008 issue of Human–Wildlife Conflicts (now Human– Wildlife Interactions, ) contained several insightful manuscripts regarding the management of nuisance b...

  5. Comments to a polar bear population model

    OpenAIRE

    Øritsland, Nils Are

    1985-01-01

    Larsen, T. & Ugland, K. I. (Polar Research 2 n.s., 117-118) note correctly that a Leslie matrix model treats cubs and females as independent units which is not the case for polar bears. Population projections using the Leslie model with hunting mortalities added are instructive first approximations in evaluations of field data, however, and are recommended as exercises also for polar bear biologists. An APL programme for such projections is available.

  6. Flywheel energy storage with superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.; Lynds, Jr., Lahmer; Hull, John R.

    1993-01-01

    A flywheel having superconductor bearings has a lower drag to lift ratio that translates to an improvement of a factor of ten in the rotational decay rate. The lower drag results from the lower dissipation of melt-processed YBCO, improved uniformity of the permanent magnet portion of the bearings, operation in a different range of vacuum pressure from that taught by the art, and greater separation distance from the rotating members of conductive materials.

  7. Passive magnetic bearings for vehicular electromechanical batteries

    Energy Technology Data Exchange (ETDEWEB)

    Post, R

    1996-03-01

    This report describes the design of a passive magnetic bearing system to be used in electromechanical batteries (flywheel energy storage modules) suitable for vehicular use. One or two such EMB modules might, for example, be employed in a hybrid-electric automobile, providing efficient means for power peaking, i.e., for handling acceleration and regenerative braking power demands at high power levels. The bearing design described herein will be based on a ''dual-mode'' operating regime.

  8. Are organohalogen contaminants a bears (Ursus maritimus)?

    DEFF Research Database (Denmark)

    Sonne, Christian; Dietz, Rune; Leifsson, PS

    2006-01-01

    histology parameters for this subpopulation of polar bears. The present study examined the OHC concentrations and adverse effects on renal tissue for 75 polar bears collected during 1999 to 2002. Specific lesions were diffuse glomerular capillary wall thickening, mesangial glomerular deposits, tubular....... In adult males, statistically significant (p thickening and chlordane (sigmaCHL) concentrations, and tubular medullary hyalin casts and sigmaCHL, sigma...

  9. [High-intensity focused ultrasound inhibits tumor metastasis in a melanoma-bearing mouse model].

    Science.gov (United States)

    Li, Huan; Yuan, Shimei; Yang, Min; Duan, Liang; Wang, Haiyan; Zha, He; Li, Xueru; Sun, Hui; Weng, Yaguang; Luo, Jinyong; He, Tongchuan; Li, Chongyan; Wang, Yan; Li, Faqi; Wang, Zhibiao; Zhou, Lan

    2015-02-01

    To investigate the effect of high-intensity focused ultrasound (HIFU) on tumor metastasis in mouse model bearing melanoma xenograft. Mice bearing murine melanoma B16-F10 cell xenograft were randomized for sham-HIFU or HIFU exposure when the tumors grew to a maximum diameter of 7-10 mm, and the tumor size was measured every 3 days. The cumulative survival rate of the mice and tumor metastasis rate were calculated, and the circulating melanoma cells were detected using qRT-PCR. At 14 days after HIFU treatment, B16-F10 cells were retransplanted via the tail vein and the pulmonary metastatic nodules were counted. The median survival time of the mice was 19.00 days (95% CI 17.14-20.86 days) in the sham group and 26.00 days (95%CI 24.76-27.25 days) in HIFU group. The cumulative survival rate in the HIFU group was significantly higher than that in sham-HIFU group (Pmetastasis inhibition rate of 42.4%. HIFU treatment can inhibit tumor metastasis in melanoma-bearing mice possibly by reducing tumor cell detachment from the primary tumor site and suppressing colonization of the circulating melanoma cells.

  10. Network ties and survival

    DEFF Research Database (Denmark)

    Acheampong, George; Narteh, Bedman; Rand, John

    2017-01-01

    Poultry farming has been touted as one of the major ways by which poverty can be reduced in low-income economies like Ghana. Yet, anecdotally there is a high failure rate among these poultry farms. This current study seeks to understand the relationship between network ties and survival chances...... of small commercial poultry farms (SCPFs). We utilize data from a 2-year network survey of SCPFs in rural Ghana. The survival of these poultry farms are modelled using a lagged probit model of farms that persisted from 2014 into 2015. We find that network ties are important to the survival chances...... but this probability reduces as the number of industry ties increases but moderation with dynamic capability of the firm reverses this trend. Our findings show that not all network ties aid survival and therefore small commercial poultry farmers need to be circumspect in the network ties they cultivate and develop....

  11. Dynamic tester for rotor seals and bearings

    Science.gov (United States)

    Vonpragenau, George L. (Inventor)

    1993-01-01

    A dynamic tester for testing vibration damping seals and bearings is constructed having a hollow shaft extending through the seal or bearing, with the shaft internally supported at each end by fluid bearings on hollow bosses connected to an interior of an enclosure, with no rolling members connected to the shaft is described. A high pressure working fluid is forced through the hollow bosses to operate the bearings. Additionally, the shaft is provided with a reaction turbine that angularly vents a portion of the high pressure working fluid in order to rotate the shaft at high speed, up to 40,000 rpm. The seal or bearing is mounted in a bushing, in turn supported by rods to a shaking device that vibrates the seal or bearing as the shaft is rotated. A plurality of proximity sensors are mounted from outside the enclosure to sense shaft and seal bushing vibrations, and a plurality of pressure ports are disposed in the enclosure to allow sensing of dynamic and static pressures of the testing apparatus.

  12. Rotordynamics and bearing design of turbochargers

    Science.gov (United States)

    Chen, Wen Jeng

    2012-05-01

    Turbochargers have gained significant attention in recent years. They are already widely used in automotive, locomotive, and marine applications with diesel engines. They are also applied in the aerospace application to increase the engine performance now. The turbochargers used in automotive and aerospace industry are very light-weight with operating speeds above 100,000 rpm. The turbochargers used in locomotive and marine applications are relatively heavy in size and power compared to the automotive and aerospace applications, and the maximum continuous operating speeds are around 30,000 rpm depending on the diesel engine power rating. Floating ring bushings, semi-floating dampers, ball bearings, and ball bearings with dampers are commonly used in automotive applications for small turbochargers. However, these bearings may not be appropriate for large turbochargers in locomotive and marine applications. Instead, multi-lobed bearings with and without squeeze film dampers are commonly used in these heavy-duty turbochargers. This paper deals with the rotordynamic characteristics of larger turbochargers in locomotive and marine applications. Various bearing designs are discussed. Bearing design parameters are studied and optimal values are suggested. Test results are also presented to support the analytical simulation.

  13. Commissioning results of the HZB quadrupole resonator

    CERN Document Server

    Kleindienst, Raphael; Knobloch, Jens; Kugeler, Oliver

    2015-01-01

    Recent cavity results with niobium have demonstrated the necessity of a good understanding of both the BCS and residual resistance. For a complete picture and comparison with theory, it is essential that one can measure the RF properties as a function of field, temperature, frequency and ambient magnetic field. Standard cavity measurements are limited in their ability to change all parameters freely and in a controlled manner. On the other hand, most sample measurement setups operate at fairly high frequency, where the surface resistance is always BCS dominated. The quadrupole resonator, originally developed at CERN, is ideally suited for characterization of samples at typical cavity RF frequencies. We report on a modified version of the QPR with improved RF figures of merit for high-field operation. Experimental challenges in the commissioning run and alternate designs for simpler sample changes are shown alongside measurement results of a large grain niobium sample.

  14. Commissioning of SLAC SLD 45-Degree Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Eschenburg, Vance O.

    2002-07-19

    The SLD experiment at the Stanford Linear Accelerator Center had a significant gap in its muon tracking coverage, provided by the Warm Iron Calorimeter. Supplemental planes of limited streamer tube chambers were added to improve the coverage in the vicinity of the gap at 0.65 < |cos{theta}| < 0.85. A software effort to upgrade the tracking software for this system is detailed. The commissioning of the forty-five degree chamber region of the SLAC SLD Warm Iron Calorimeter is presented. This task involved the completion of the forty-five degree chamber region geometry for the Warm Iron Calorimeter's fitter and swimmer and the changing of the way multiple scattering effects are treated in the fitter algorithm.

  15. Seznamte se: International Commission on Mathematical Instruction

    Directory of Open Access Journals (Sweden)

    Jarmila Novotná

    2013-10-01

    Full Text Available Článek seznamuje čtenáře s International Commission on Mathematical Instruction (ICMI, komisí nevládní mezinárodní neziskové vědecké organizace International Mathematical Union (IMU, jejímž úkolem je podporovat a zlepšovat mezinárodní spolupráci v matematice. Hlavní pozornost je věnována cílům ICMI, její činnosti, spolupráci s přidruženými organizacemi a některým novým projektům směřujícím ke zlepšení vyučování matematice.

  16. Commissioning Perspectives for the ATLAS Pixel Detector

    CERN Document Server

    AUTHOR|(CDS)2067982; Klingenberg, Reiner

    2007-01-01

    The ATLAS Pixel Detector, the innermost sub-detector of the ATLAS experiment at the Large Hadron Collider, CERN, is an 80 million channel silicon pixel tracking detector designed for high-precision charged particle tracking and secondary vertex reconstruction. It was installed in the ATLAS experiment and commissioning for the first proton-proton collision data taking in 2008 has begun. Due to the complex layout and limited accessibility, quality assurance measurements were continuously performed during production and assembly to ensure that no problematic components are integrated. The assembly of the detector at CERN and related quality assurance measurement results, including comparison to previous production measurements, will be presented. In order to verify that the integrated detector, its data acquisition readout chain, the ancillary services and cooling system as well as the detector control and data acquisition software perform together as expected approximately 8% of the detector system was progress...

  17. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Multimedia

    D. Acosta

    Run coordination and DPG The activities of the DPGs in the last six months have included the completion of publications (and many internal notes) on the data collected during CRAFT08 exercise, continuation of these studies with CRAFT09 data, and finally the first workflows and prompt feedback on 2009 LHC beam data. The level of readiness of the DPG prompt feedback groups is quite high, as first results from the early November “beam splash” data were shown to CMS within 24 hours of the first LHC beam. Moreover, results from the first collisions at 900 GeV were presented publicly three days afterward on November 26th. The CRAFT09 cosmic data taking period provided an opportunity to commission the calibration and alignment workflows on large data samples using the same software release series intended for the first LHC data, and to demonstrate routine operation of alignment and calibration workflows under production conditions. Significantly, the "prompt calibration loop" wa...

  18. Age and sex composition of seals killed by polar bears in the eastern Beaufort Sea.

    Directory of Open Access Journals (Sweden)

    Nicholas W Pilfold

    Full Text Available BACKGROUND: Polar bears (Ursus maritimus of the Beaufort Sea enter hyperphagia in spring and gain fat reserves to survive periods of low prey availability. We collected information on seals killed by polar bears (n=650 and hunting attempts on ringed seal (Pusa hispida lairs (n=1396 observed from a helicopter during polar bear mark-recapture studies in the eastern Beaufort Sea in spring in 1985-2011. We investigated how temporal shifts in ringed seal reproduction affect kill composition and the intraspecific vulnerabilities of ringed seals to polar bear predation. PRINCIPAL FINDINGS: Polar bears primarily preyed on ringed seals (90.2% while bearded seals (Erignathus barbatus only comprised 9.8% of the kills, but 33% of the biomass. Adults comprised 43.6% (150/344 of the ringed seals killed, while their pups comprised 38.4% (132/344. Juvenile ringed seals were killed at the lowest proportion, comprising 18.0% (62/344 of the ringed seal kills. The proportion of ringed seal pups was highest between 2007-2011, in association with high ringed seal productivity. Half of the adult ringed seal kills were ≥ 21 years (60/121, and kill rates of adults increased following the peak of parturition. Determination of sex from DNA revealed that polar bears killed adult male and adult female ringed seals equally (0.50, n=78. The number of hunting attempts at ringed seal subnivean lair sites was positively correlated with the number of pup kills (r(2 =0.30, P=0.04, but was not correlated with the number of adult kills (P=0.37. CONCLUSIONS/SIGNIFICANCE: Results are consistent with decadal trends in ringed seal productivity, with low numbers of pups killed by polar bears in spring in years of low pup productivity, and conversely when pup productivity was high. Vulnerability of adult ringed seals to predation increased in relation to reproductive activities and age, but not gender.

  19. Advanced photoinjector experiment photogun commissioning results

    Directory of Open Access Journals (Sweden)

    F. Sannibale

    2012-10-01

    Full Text Available The Advanced Photoinjector Experiment (APEX at the Lawrence Berkeley National Laboratory is dedicated to the development of a high-brightness high-repetition rate (MHz-class electron injector for x-ray free-electron laser (FEL and other applications where high repetition rates and high brightness are simultaneously required. The injector is based on a new concept rf gun utilizing a normal-conducting (NC cavity resonating in the VHF band at 186 MHz, and operating in continuous wave (cw mode in conjunction with high quantum efficiency photocathodes capable of delivering the required charge at MHz repetition rates with available laser technology. The APEX activities are staged in three phases. In phase 0, the NC cw gun is built and tested to demonstrate the major milestones to validate the gun design and performance. Also, starting in phase 0 and continuing in phase I, different photocathodes are tested at the gun energy and at full repetition rate for validating candidate materials to operate in a high-repetition rate FEL. In phase II, a room-temperature pulsed linac is added for accelerating the beam at several tens of MeV to reduce space charge effects and allow the measurement of the brightness of the beam from the gun when integrated in an injector scheme. The installation of the phase 0 beam line and the commissioning of the VHF gun are completed, phase I components are under fabrication, and initial design and specification of components and layout for phase II are under way. This paper presents the phase 0 commissioning results with emphasis on the experimental milestones that have successfully demonstrated the APEX gun capability of operating at the required performance.

  20. Costs of locomotion in polar bears: when do the costs outweigh the benefits of chasing down terrestrial prey?

    Science.gov (United States)

    Gormezano, Linda J; McWilliams, Scott R; Iles, David T; Rockwell, Robert F

    2016-01-01

    Trade-offs between locomotory costs and foraging gains are key elements in determining constraints on predator-prey interactions. One intriguing example involves polar bears pursuing snow geese on land. As climate change forces polar bears to spend more time ashore, they may need to expend more energy to obtain land-based food. Given that polar bears are inefficient at terrestrial locomotion, any extra energy expended to pursue prey could negatively impact survival. However, polar bears have been regularly observed engaging in long pursuits of geese and other land animals, and the energetic worth of such behaviour has been repeatedly questioned. We use data-driven energetic models to examine how energy expenditures vary across polar bear mass and speed. For the first time, we show that polar bears in the 125-235 kg size range can profitably pursue geese, especially at slower speeds. We caution, however, that heat build-up may be the ultimate limiting factor in terrestrial chases, especially for larger bears, and this limit would be reached more quickly with warmer environmental temperatures.

  1. Aircraft Survivability: Rotorcraft Survivability. Summer 2010

    Science.gov (United States)

    2010-01-01

    protect those who serve to protect us?” The answer is a mixed bag. I am fortunate to have joined a group of dedicated men and women who represent this...and Service subject matter experts on rotorcraft safety and survivability to complete the study and report the results to the Joint Chiefs of...Operations and Support CDD TEMP DT DT/OT LUT IOT &E BLRIP TEMP TEMP LRIP Acquisition & LFT Strategies B C LFT&E Review Requirements Approve TEMPs

  2. Assessment of Brown Bear\\'s (Ursus arctos syriacus Winter Habitat Using Geographically Weighted Regression and Generalized Linear Model in South of Iran

    Directory of Open Access Journals (Sweden)

    A. A. Zarei

    2016-03-01

    Full Text Available Winter dens are one of the important components of brown bear's (Ursus arctos syriacus habitat, affecting their reproduction and survival. Therefore identification of factors affecting the habitat selection and suitable denning areas in the conservation of our largest carnivore is necessary. We used Geographically Weighted Logistic Regression (GWLR and Generalized Linear Model (GLM for modeling suitability of denning habitat in Kouhkhom region in Fars province. In the present research, 20 dens (presence locations and 20 caves where signs of bear were not found (absence locations were used as dependent variables and six environmental factors were used for each location as independent variables. The results of GLM showed that variables of distance to settlements, altitude, and distance to water were the most important parameters affecting suitability of the brown bear's denning habitat. The results of GWLR showed the significant local variations in the relationship between occurrence of brown bear dens and the variable of distance to settlements. Based on the results of both models, suitable habitats for denning of the species are impassable areas in the mountains and inaccessible for humans.

  3. How have alternative bearings and modularity affected revision rates in total hip arthroplasty?

    Science.gov (United States)

    Mihalko, William M; Wimmer, Markus A; Pacione, Carol A; Laurent, Michel P; Murphy, Robert F; Rider, Carson

    2014-12-01

    Total hip arthroplasty (THA) continues to be one of the most successful surgical procedures in the medical field. However, over the last two decades, the use of modularity and alternative bearings in THA has become routine. Given the known problems associated with hard-on-hard bearing couples, including taper failures with more modular stem designs, local and systemic effects from metal-on-metal bearings, and fractures with ceramic-on-ceramic bearings, it is not known whether in aggregate the survivorship of these implants is better or worse than the metal-on-polyethylene bearings that they sought to replace. Have alternative bearings (metal-on-metal and ceramic-on-ceramic) and implant modularity decreased revision rates of primary THAs? In this systematic review of MEDLINE and EMBASE, we used several Boolean search strings for each topic and surveyed national registry data from English-speaking countries. Clinical research (Level IV or higher) with ≥ 5 years of followup was included; retrieval studies and case reports were excluded. We included registry data at ≥ 7 years followup. A total of 32 studies (and five registry reports) on metal-on-metal, 19 studies (and five registry reports) on ceramic-on-ceramic, and 20 studies (and one registry report) on modular stem designs met inclusion criteria and were evaluated in detail. Insufficient data were available on metal-on-ceramic and ceramic-on-metal implants, and monoblock acetabular designs were evaluated in another recent systematic review so these were not evaluated here. There was no evidence in the literature that alternative bearings (either metal-on-metal or ceramic-on-ceramic) in THA have decreased revision rates. Registry data, however, showed that large head metal-on-metal implants have lower 7- to 10-year survivorship than do standard bearings. In THA, modular exchangeable femoral neck implants had a lower 10-year survival rate in both literature reviews and in registry data compared with combined

  4. International comparative evaluation of knee replacement with fixed or mobile-bearing posterior-stabilized prostheses.

    Science.gov (United States)

    Graves, Stephen; Sedrakyan, Art; Baste, Valborg; Gioe, Terence J; Namba, Robert; Martínez Cruz, Olga; Stea, Susanna; Paxton, Elizabeth; Banerjee, Samprit; Isaacs, Abby J; Robertsson, Otto

    2014-12-17

    Posterior-stabilized total knee prostheses were introduced to address instability secondary to loss of posterior cruciate ligament function, and they have either fixed or mobile bearings. Mobile bearings were developed to improve the function and longevity of total knee prostheses. In this study, the International Consortium of Orthopaedic Registries used a distributed health data network to study a large cohort of posterior-stabilized prostheses to determine if the outcome of a posterior-stabilized total knee prosthesis differs depending on whether it has a fixed or mobile-bearing design. Aggregated registry data were collected with a distributed health data network that was developed by the International Consortium of Orthopaedic Registries to reduce barriers to participation (e.g., security, proprietary, legal, and privacy issues) that have the potential to occur with the alternate centralized data warehouse approach. A distributed health data network is a decentralized model that allows secure storage and analysis of data from different registries. Each registry provided data on mobile and fixed-bearing posterior-stabilized prostheses implanted between 2001 and 2010. Only prostheses associated with primary total knee arthroplasties performed for the treatment of osteoarthritis were included. Prostheses with all types of fixation were included except for those with the rarely used reverse hybrid (cementless tibial and cemented femoral components) fixation. The use of patellar resurfacing was reported. The outcome of interest was time to first revision (for any reason). Multivariate meta-analysis was performed with linear mixed models with survival probability as the unit of analysis. This study includes 137,616 posterior-stabilized knee prostheses; 62% were in female patients, and 17.6% had a mobile bearing. The results of the fixed-effects model indicate that in the first year the mobile-bearing posterior-stabilized prostheses had a significantly higher hazard

  5. Climate change threatens polar bear populations: a stochastic demographic analysis.

    Science.gov (United States)

    Hunter, Christine M; Caswell, Hal; Runge, Michael C; Regehr, Eric V; Amstrup, Steve C; Stirling, Ian

    2010-10-01

    The polar bear (Ursus maritimus) depends on sea ice for feeding, breeding, and movement. Significant reductions in Arctic sea ice are forecast to continue because of climate warming. We evaluated the impacts of climate change on polar bears in the southern Beaufort Sea by means of a demographic analysis, combining deterministic, stochastic, environment-dependent matrix population models with forecasts of future sea ice conditions from IPCC general circulation models (GCMs). The matrix population models classified individuals by age and breeding status; mothers and dependent cubs were treated as units. Parameter estimates were obtained from a capture-recapture study conducted from 2001 to 2006. Candidate statistical models allowed vital rates to vary with time and as functions of a sea ice covariate. Model averaging was used to produce the vital rate estimates, and a parametric bootstrap procedure was used to quantify model selection and parameter estimation uncertainty. Deterministic models projected population growth in years with more extensive ice coverage (2001-2003) and population decline in years with less ice coverage (2004-2005). LTRE (life table response experiment) analysis showed that the reduction in lambda in years with low sea ice was due primarily to reduced adult female survival, and secondarily to reduced breeding. A stochastic model with two environmental states, good and poor sea ice conditions, projected a declining stochastic growth rate, log lambdas, as the frequency of poor ice years increased. The observed frequency of poor ice years since 1979 would imply log lambdas approximately - 0.01, which agrees with available (albeit crude) observations of population size. The stochastic model was linked to a set of 10 GCMs compiled by the IPCC; the models were chosen for their ability to reproduce historical observations of sea ice and were forced with "business as usual" (A1B) greenhouse gas emissions. The resulting stochastic population

  6. Climate change threatens polar bear populations: A stochastic demographic analysis

    Science.gov (United States)

    Hunter, C.M.; Caswell, H.; Runge, M.C.; Regehr, E.V.; Amstrup, Steven C.; Stirling, I.

    2010-01-01

    The polar bear (Ursus maritimus) depends on sea ice for feeding, breeding, and movement. Significant reductions in Arctic sea ice are forecast to continue because of climate warming. We evaluated the impacts of climate change on polar bears in the southern Beaufort Sea by means of a demographic analysis, combining deterministic, stochastic, environment-dependent matrix population models with forecasts of future sea ice conditions from IPCC general circulation models (GCMs). The matrix population models classified individuals by age and breeding status; mothers and dependent cubs were treated as units. Parameter estimates were obtained from a capture-recapture study conducted from 2001 to 2006. Candidate statistical models allowed vital rates to vary with time and as functions of a sea ice covariate. Model averaging was used to produce the vital rate estimates, and a parametric bootstrap procedure was used to quantify model selection and parameter estimation uncertainty. Deterministic models projected population growth in years with more extensive ice coverage (2001-2003) and population decline in years with less ice coverage (2004-2005). LTRE (life table response experiment) analysis showed that the reduction in ?? in years with low sea ice was due primarily to reduced adult female survival, and secondarily to reduced breeding. A stochastic model with two environmental states, good and poor sea ice conditions, projected a declining stochastic growth rate, log ??s, as the frequency of poor ice years increased. The observed frequency of poor ice years since 1979 would imply log ??s ' - 0.01, which agrees with available (albeit crude) observations of population size. The stochastic model was linked to a set of 10 GCMs compiled by the IPCC; the models were chosen for their ability to reproduce historical observations of sea ice and were forced with "business as usual" (A1B) greenhouse gas emissions. The resulting stochastic population projections showed drastic

  7. Polar bears: the fate of an icon.

    Science.gov (United States)

    Fitzgerald, Kevin T

    2013-11-01

    Polar bears are one of the most iconic animals on our planet. Worldwide, even people who would never see one are drawn to these charismatic arctic ice hunters. They are the world's largest terrestrial carnivore, and despite being born on land, they spend most of their lives out on the sea ice and are considered a marine mammal. Current global studies estimate there are around 20,000 animals in some 19 discrete circumpolar populations. Aside from pregnant females denning in the winter months to give birth, the white bears do not hibernate. They spend their winters on the sea ice hunting seals, an activity they are spectacularly adapted for. Research on these animals is incredibly difficult because of the inhospitable surroundings they inhabit and how inaccessible they make the bears. For many years, the sum of our understanding of the natural history of polar bears came from tracks, scats, the remains of their kills, abandoned dens, and anecdotal observations of native hunters, explorers, and early biologists. Nonetheless, the last 40 years have seen a much better picture of their biology emerge thanks to, first, dedicated Canadian researchers and, later, truly international efforts of workers from many countries. Veterinarians have contributed to our knowledge of the bears by delivering and monitoring anesthesia, obtaining blood samples, performing necropsies, investigating their reproduction, conducting radiotelemetry studies, and examining their behavior. Recently, new technologies have been developed that revolutionize the study of the lives and natural history of undisturbed polar bears. These advances include better satellite radiotelemetry equipment and the development of remote-controlled miniature devices equipped with high-definition cameras. Such new modalities provide dramatic new insights into the life of polar bears. The remarkable degree of specialized adaptation to life on the sea ice that allowed the bears to be successful is the very reason that

  8. Rolling Bearing Life Prediction, Theory, and Application

    Science.gov (United States)

    Zaretsky, Erwin V.

    2013-01-01

    A tutorial is presented outlining the evolution, theory, and application of rolling-element bearing life prediction from that of A. Palmgren, 1924; W. Weibull, 1939; G. Lundberg and A. Palmgren, 1947 and 1952; E. Ioannides and T. Harris, 1985; and E. Zaretsky, 1987. Comparisons are made between these life models. The Ioannides-Harris model without a fatigue limit is identical to the Lundberg-Palmgren model. The Weibull model is similar to that of Zaretsky if the exponents are chosen to be identical. Both the load-life and Hertz stress-life relations of Weibull, Lundberg and Palmgren, and Ioannides and Harris reflect a strong dependence on the Weibull slope. The Zaretsky model decouples the dependence of the critical shear stress-life relation from the Weibull slope. This results in a nominal variation of the Hertz stress-life exponent. For 9th- and 8th-power Hertz stress-life exponents for ball and roller bearings, respectively, the Lundberg- Palmgren model best predicts life. However, for 12th- and 10th-power relations reflected by modern bearing steels, the Zaretsky model based on the Weibull equation is superior. Under the range of stresses examined, the use of a fatigue limit would suggest that (for most operating conditions under which a rolling-element bearing will operate) the bearing will not fail from classical rolling-element fatigue. Realistically, this is not the case. The use of a fatigue limit will significantly overpredict life over a range of normal operating Hertz stresses. Since the predicted lives of rolling-element bearings are high, the problem can become one of undersizing a bearing for a particular application.

  9. Mass Loss Rates of Fasting Polar Bears.

    Science.gov (United States)

    Pilfold, Nicholas W; Hedman, Daryll; Stirling, Ian; Derocher, Andrew E; Lunn, Nicholas J; Richardson, Evan

    2016-01-01

    Polar bears (Ursus maritimus) have adapted to an annual cyclic regime of feeding and fasting, which is extreme in seasonal sea ice regions of the Arctic. As a consequence of climate change, sea ice breakup has become earlier and the duration of the open-water period through which polar bears must rely on fat reserves has increased. To date, there is limited empirical data with which to evaluate the potential energetic capacity of polar bears to withstand longer fasts. We measured the incoming and outgoing mass of inactive polar bears (n = 142) that were temporarily detained by Manitoba Conservation and Water Stewardship during the open-water period near the town of Churchill, Manitoba, Canada, in 2009-2014. Polar bears were given access to water but not food and held for a median length of 17 d. Median mass loss rates were 1.0 kg/d, while median mass-specific loss rates were 0.5%/d, similar to other species with high adiposity and prolonged fasting capacities. Mass loss by unfed captive adult males was identical to that lost by free-ranging individuals, suggesting that terrestrial feeding contributes little to offset mass loss. The inferred metabolic rate was comparable to a basal mammalian rate, suggesting that while on land, polar bears can maintain a depressed metabolic rate to conserve energy. Finally, we estimated time to starvation for subadults and adult males for the on-land period. Results suggest that at 180 d of fasting, 56%-63% of subadults and 18%-24% of adult males in this study would die of starvation. Results corroborate previous assessments on the limits of polar bear capacity to withstand lengthening ice-free seasons and emphasize the greater sensitivity of subadults to changes in sea ice phenology.

  10. Noise reduction of rotating machinery by viscoelastic bearing supports.

    NARCIS (Netherlands)

    Tillema, H.G.

    2003-01-01

    The demand for silent rolling bearing applications, such as electric motors and gearboxes, has resulted in an investigation of viscoelastic bearing supports. By placing a thin viscoelastic layer between the bearing outer ring and the surrounding structure, vibrations of the shaft-bearing arrangement

  11. Survey on the virtual commissioning of manufacturing systems

    Directory of Open Access Journals (Sweden)

    Chi G. Lee

    2014-07-01

    Full Text Available This paper reviews and identifies issues in the application of virtual commissioning technology for automated manufacturing systems. While the real commissioning of a manufacturing system involves a real plant system and a real controller, the virtual commissioning deals with a virtual plant model and a real controller. The expected benefits of virtual commissioning are the reduction of debugging and correction efforts during the subsequent real commissioning stage. However, it requires a virtual plant model and hence still requires significant amount time and efforts. Two main issues are identified, the physical model construction of a virtual device, and the logical model construction of a virtual device. This paper reviews the current literature related to the two issues and proposes future research directions to achieve the full utilization of virtual commissioning technology.

  12. Horizontal mergers and weak and strong competition commissions

    Directory of Open Access Journals (Sweden)

    Ristić Bojan

    2014-01-01

    Full Text Available In this paper we analyse the horizontal merger of companies in an already concentrated industry. The participants in mergers are obliged to submit notification to the Competition Commission but they also have the option of rejecting the merger. At the time of the notification submission the participants do not know whether the Commission is strong or weak, and they can complain to the Court if the Commission prohibits the merger. We model the strategic interaction between Participants and Commission in a dynamic game of incomplete information and determine weak perfect Bayesian equilibria. The main finding of our paper is that Participants will base their decision to submit notification on their belief in a weak Commission decision and will almost completely ignore the possibility of a strong Commission decision. We also provide a detailed examination of one case from Serbian regulatory practice, which coincides with the results of our game theoretical model.

  13. The launching of the Commission Energy 2050; Lancement de la Commission Energy 2050

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2011-09-15

    The French government has launched the 'Energy 2050' commission whose aim is to study different energy scenarios for the future and make recommendations. The range of scenarios has to be broad: from a quick phaseout of nuclear power to a quick passage to a fleet of third generation reactors. Each scenario will be studied according to 4 parameters: the electricity price, the impact on the environment and the fight against climate warming, the security of energy supplies, and public acceptance. The commission will have to release its recommendations by end January 2012. These recommendations will be used to prepare the next investment plan in the energy sector that is due to be discussed in the parliament in 2013. (A.C.)

  14. 76 FR 62055 - Mississippi Delta Energy Agency, Clarksdale Public Utilities Commission, Public Service...

    Science.gov (United States)

    2011-10-06

    ... Energy Regulatory Commission Mississippi Delta Energy Agency, Clarksdale Public Utilities Commission, Public Service Commission of Yazoo City, Arkansas Electric Cooperative Corporation, South Mississippi... Agency, Clarksdale Public Utilities Commission of the City of Clarksdale, Mississippi, Public Service...

  15. Commissioning and GPs: to commit[tee] or not?

    OpenAIRE

    Drake, Julie E.

    2016-01-01

    Clinical commissioning groups (CCGs), part of the National Health Service since April 2013, are complex organisations requiring buy-in by GPs for strategic success. CCG budgetary deficits and lack of sustained engagement by GPs have been reported. This article utilises evidence of GP experience in commissioning models to determine the factors that may influence engagement in the governance of CCGs by GPs, which is crucial if clinically led commissioning is to be part of a financially sustaina...

  16. Evaluation of a 'virtual' approach to commissioning health research

    OpenAIRE

    McCourt, Christine A; Morgan, Philip A; Youll, Penny

    2006-01-01

    Abstract Background The objective of this study was to evaluate the implementation of a 'virtual' (computer-mediated) approach to health research commissioning. This had been introduced experimentally in a DOH programme – the 'Health of Londoners Programme' – in order to assess whether is could enhance the accessibility, transparency and effectiveness of commissioning health research. The study described here was commissioned to evaluate this novel approach, addressing these key questions. Me...

  17. Should diabetes be commissioned through multidisciplinary networks, rather than Practice Based Commissioning?

    Science.gov (United States)

    Simmons, David; English, Patrick; Robins, Peter; Craig, Andrew; Addicott, Rachael

    2011-04-01

    Diabetes is recognized as a complex, long term, largely asymptomatic condition requiring self management skills, a range of health care professionals and articulated health services. Diabetes Networks have been introduced to provide guidance from people with diabetes and local health professionals with different skills to ensure that diabetes care is well organized, sustainable and delivers quality care. We have considered the role of Diabetes Networks in the English setting. Drawing on studies of health service organization and health policy, we describe the context in which diabetes commissioning is currently occurring in England, the role of Diabetes Networks and key components for an effective Diabetes Network. We have identified that Diabetes Networks are not currently mandatory and discovered policy approaches that are likely to work against safe, timely, integrated approaches to diabetes services with potentially harmful impacts on people with diabetes in the future. Practice Based Commissioning, where it sidelines Diabetes Networks, is a particular concern. We have identified key components of Diabetes Networks including explicit frameworks for leadership, membership, funding, decision making, communication and action. Diabetes is a condition requiring collaboration between all involved. Diabetes Networks include patients and all relevant health professionals and should dictate what and how diabetes care should be commissioned within the local health economy. Copyright © 2010 Primary Care Diabetes Europe. Published by Elsevier Ltd. All rights reserved.

  18. Comment on "Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage".

    Science.gov (United States)

    Nakagome, Shigeki; Mano, Shuhei; Hasegawa, Masami

    2013-03-29

    Based on nuclear and mitochondrial DNA, Hailer et al. (Reports, 20 April 2012, p. 344) suggested early divergence of polar bears from a common ancestor with brown bears and subsequent introgression. Our population genetic analysis that traces each of the genealogies in the independent nuclear loci does not support the evolutionary model proposed by the authors.

  19. Shifted laser surface texturing for bearings applications

    Science.gov (United States)

    Houdková, Š.; Šperka, P.; Repka, M.; Martan, J.; Moskal, D.

    2017-05-01

    The laser surface texturing (LST) technologies, based on creation of micro-pattern with pre-defined geometry can positively influence both the friction and wear of tribo-elements. In practice, the integration of LST technology is often limited due to its slowness. The new method, so called shifted laser surface texturing (sLST) with increased process speed was developed to make the technology more attractive for the industrial application. In the paper, the texture created by sLST technology was applied onto the steel samples and Al-Sn-Si surface of sliding bearings. Both block-on-ring (ASTM G-77) laboratory tests of steel samples and high-loaded working application tests on Al-Sn-Si bearings surface were carried out to evaluate the influence of texture on tribological behaviour. The ASTM G-77 laboratory tests showed a positive effect of the texture on friction behaviour. Under the high-loaded testing conditions, the positive effect was observed in initial stages of the tests, decreasing the torque of textured bearings compared to the untreated one. Lately, the texture was worn out and have no influence on the overall wear of the bearings. Based on the above mentioned observations, the use of alternative bearing material with higher hardness or application of protective layer over the created texture was suggested to exploit the texture benefits.

  20. Identifying lubricant options for compressor bearing designs

    Science.gov (United States)

    Karnaz, J.; Seeton, C.; Dixon, L.

    2017-08-01

    Today’s refrigeration and air conditioning market is not only driven by the environmental aspects of the refrigerants, but also by the energy efficiency and reliability of system operation. Numerous types of compressor designs are used in refrigeration and air conditioning applications which means that different bearings are used; and in some cases, multiple bearing types within a single compressor. Since only one lubricant is used, it is important to try to optimize the lubricant to meet the various demands and requirements for operation. This optimization entails investigating different types of lubricant chemistries, viscosities, and various formulation options. What makes evaluating these options more challenging is the refrigerant which changes the properties of the lubricant delivered to the bearing. Once the lubricant and refrigerant interaction are understood, through various test methods, then work can start on collaborating with compressor engineers on identifying the lubricant chemistry and formulation options. These interaction properties are important to the design engineer to make decisions on the adequacy of the lubricant before compressor tests are started. This paper will discuss the process to evaluate lubricants for various types of compressors and bearing design with focus on what’s needed for current refrigerant trends. In addition, the paper will show how the lubricant chemistry choice can be manipulated through understanding of the bearing design and knowledge of interaction with the refrigerant to maximize performance. Emphasis will be placed on evaluation of synthetic lubricants for both natural and synthetic low GWP refrigerants.

  1. Reforming the European Commission – A (missed? Academic Opportunity

    Directory of Open Access Journals (Sweden)

    Michael W. Bauer

    2002-07-01

    Full Text Available The desire to reform the European Commission is a recurrent theme on the agenda. Has the political failure to reach an appropriate restructuring of this institution a parallel in academic neglect of that institution? To answer this question the article looks into current research efforts on the reform of the European Commission. It calls for (more systematic investigation into the Commission's managerial strengths and weaknesses and does plead for a reassessment of the Commission's potential in the context of the ongoing governance changes.

  2. European Commission, the Institution which brings Europe closer

    Directory of Open Access Journals (Sweden)

    Enertila Bekteshi

    2016-11-01

    Full Text Available This paper presents a brief story of the establishment and function of the European Commission. Why European Commission is considered the shortest way toward Europe? This material recalls the agreements concluded since the beginning of the creation of the European Commission, scope of cooperation among member countries aiming a single and economic and political unit which directs and develops the Continent. The role of Commission stands at the center of explanations regarding the nature of the path toward the European integration. Obviously the debate is made for EU. In case the Commission is seen as an autonomous actor, the argument that EU is an intergovernmental organization will be diminished. So far, the Commission has been at the center of critiques in the role as manager of the policies of the Community and finances. Meanwhile the policy of implementation is not having a rectilinear motion within the member countries. Any member country may sue another country for breach of the Commission’s obligations. The Commission is still depending on the national governments and administrations, the achievement of the policy goals at an EU inclined to expansion, is difficult. This has made more difficult the job of the Commission. Another aspect being noticed is that EU can make an effective policy in the enterprising area, setting out some basic criteria for the efficiency of decisions taken and demonstrate capacities to correct the eff ects of failure. Also, the Commission role in managing the budget deficit should be obvious.

  3. Method for changing removable bearing for a wind turbine generator

    Science.gov (United States)

    Bagepalli, Bharat Sampathkumaran; Jansen, Patrick Lee; Gadre, Aniruddha Dattatraya

    2008-04-22

    A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

  4. Removable bearing arrangement for a wind turbine generator

    Science.gov (United States)

    Bagepalli, Bharat Sampathkumaran; Jansen, Patrick Lee; Gadre, Aniruddha Dattatraya

    2010-06-15

    A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

  5. Superconducting Meissner Effect Bearings for Cryogenic Turbomachines. Phase 2

    Science.gov (United States)

    1994-02-01

    significant sources of damping being squeeze - film damping in the gap and any structural damping in the bearings . The first of these damping sources is dependent... bearing / damper , that the gas bearing could be stabilized at cryogenic temperatures. Figure 12 shows the hybrid gas/Meissner-effect bearing . The tilt-pad...Housing TurbomachineAssembly with T Meissner Dampers and Self-Acting Tilt-Pad Gas Bearings In-Une Heaters Manually Controlled Uquid Nitrogen -j T

  6. Bearing tester data compilation, analysis and reporting and bearing math modeling, volume 1

    Science.gov (United States)

    Marshall, D. D.; Montgomery, E. E.; New, L. S.; Stone, M. A.; Tiller, B. K.

    1984-01-01

    Thermal and mechanical models of high speed angular contact ball bearings operating in LOX and LN2 were developed and verified with limited test data in an effort to further understand the parameters that determine or effect the SSME turbopump bearing operational characteristics and service life. The SHABERTH bearing analysis program which was adapted to evaluate shaft bearing systems in cryogenics is not capable of accommodating varying thermal properties and two phase flow. A bearing model with this capability was developed using the SINDA thermal analyzer. Iteration between the SHABERTH and the SINDA models enable the establishment of preliminary bounds for stable operation in LN2. These limits were established in terms of fluid flow, fluid inlet temperature, and axial load for a shaft speed of 30,000 RPM.

  7. Hematology of southern Beaufort Sea polar bears (2005-2007): Biomarker for an arctic ecosystem health sentinel

    Science.gov (United States)

    Kirk, Cassandra M.; Amstrup, Steven C.; Swor, Rhonda; Holcomb, Darce; O'Hara, T. M.

    2010-01-01

    Declines in sea-ice habitats have resulted in declining stature, productivity, and survival of polar bears in some regions. With continuing sea-ice declines, negative population effects are projected to expand throughout the polar bear's range. Precise causes of diminished polar bear life history performance are unknown, however, climate and sea-ice condition change are expected to adversely impact polar bear (Ursus maritimus) health and population dynamics. As apex predators in the Arctic, polar bears integrate the status of lower trophic levels and are therefore sentinels of ecosystem health. Arctic residents feed at the apex of the ecosystem, thus polar bears can serve as indicators of human health in the Arctic. Despite their value as indicators of ecosystem welfare, population-level health data for U.S. polar bears are lacking. We present hematological reference ranges for southern Beaufort Sea polar bears. Hematological parameters in southern Beaufort Sea polar bears varied by age, geographic location, and reproductive status. Total leukocytes, lymphocytes, monocytes, eosinophils, and serum immunoglobulin G were significantly greater in males than females. These measures were greater in nonlactating females ages ???5, than lactating adult females ages ???5, suggesting that females encumbered by young may be less resilient to new immune system challenges that may accompany ongoing climate change. Hematological values established here provide a necessary baseline for anticipated changes in health as arctic temperatures warm and sea-ice declines accelerate. Data suggest that females with dependent young may be most vulnerable to these changes and should therefore be a targeted cohort for monitoring in this sentinel. ?? 2010 International Association for Ecology and Health.

  8. Impacts of rural development on Yellowstone wildlife: linking grizzly bear Ursus arctos demographics with projected residential growth

    Science.gov (United States)

    Schwartz, Charles C.; Gude, Patricia H.; Landenburger, Lisa; Haroldson, Mark A.; Podruzny, Shannon

    2012-01-01

    Exurban development is consuming wildlife habitat within the Greater Yellowstone Ecosystem with potential consequences to the long-term conservation of grizzly bears Ursus arctos. We assessed the impacts of alternative future land-use scenarios by linking an existing regression-based simulation model predicting rural development with a spatially explicit model that predicted bear survival. Using demographic criteria that predict population trajectory, we portioned habitats into either source or sink, and projected the loss of source habitat associated with four different build out (new home construction) scenarios through 2020. Under boom growth, we predicted that 12 km2 of source habitat were converted to sink habitat within the Grizzly Bear Recovery Zone (RZ), 189 km2 were converted within the current distribution of grizzly bears outside of the RZ, and 289 km2 were converted in the area outside the RZ identified as suitable grizzly bear habitat. Our findings showed that extremely low densities of residential development created sink habitats. We suggest that tools, such as those outlined in this article, in addition to zoning and subdivision regulation may prove more practical, and the most effective means of retaining large areas of undeveloped land and conserving grizzly bear source habitat will likely require a landscape-scale approach. We recommend a focus on land conservation efforts that retain open space (easements, purchases and trades) coupled with the implementation of ‘bear community programmes’ on an ecosystem wide basis in an effort to minimize human-bear conflicts, minimize management-related bear mortalities associated with preventable conflicts and to safeguard human communities. Our approach has application to other species and areas, and it has illustrated how spatially explicit demographic models can be combined with models predicting land-use change to help focus conservation priorities.

  9. Hematology of southern Beaufort Sea polar bears (2005-2007): biomarker for an Arctic ecosystem health sentinel.

    Science.gov (United States)

    Kirk, Cassandra M; Amstrup, Steven; Swor, Rhonda; Holcomb, Darce; O'Hara, Todd M

    2010-09-01

    Declines in sea-ice habitats have resulted in declining stature, productivity, and survival of polar bears in some regions. With continuing sea-ice declines, negative population effects are projected to expand throughout the polar bear's range. Precise causes of diminished polar bear life history performance are unknown, however, climate and sea-ice condition change are expected to adversely impact polar bear (Ursus maritimus) health and population dynamics. As apex predators in the Arctic, polar bears integrate the status of lower trophic levels and are therefore sentinels of ecosystem health. Arctic residents feed at the apex of the ecosystem, thus polar bears can serve as indicators of human health in the Arctic. Despite their value as indicators of ecosystem welfare, population-level health data for U.S. polar bears are lacking. We present hematological reference ranges for southern Beaufort Sea polar bears. Hematological parameters in southern Beaufort Sea polar bears varied by age, geographic location, and reproductive status. Total leukocytes, lymphocytes, monocytes, eosinophils, and serum immunoglobulin G were significantly greater in males than females. These measures were greater in nonlactating females ages ≥5, than lactating adult females ages ≥5, suggesting that females encumbered by young may be less resilient to new immune system challenges that may accompany ongoing climate change. Hematological values established here provide a necessary baseline for anticipated changes in health as arctic temperatures warm and sea-ice declines accelerate. Data suggest that females with dependent young may be most vulnerable to these changes and should therefore be a targeted cohort for monitoring in this sentinel.

  10. The International Whaling Commission – Beyond Whaling

    Directory of Open Access Journals (Sweden)

    Andrew John Wright

    2016-08-01

    Full Text Available Since its establishment in 1946 as the international body intended to manage whaling, the International Whaling Commission (IWC has expanded its areas of interest to ensure the wider conservation of whales. Several key conservation topics have been taken forward under its auspices including climate change, chemical and noise pollution, marine debris and whale watching. Work on each of these topics at the IWC has grown substantially since the 1990s and remains ongoing. Important developments were the establishment of the Standing Working Group on Environmental Concerns in 1996 and the IWC’s Conservation Committee in 2003. Trying to address this diverse set of issues is obviously a challenge but will be necessary if the long term conservation of cetaceans is to be achieved. Through research, workshops, resolutions and collaboration with other organisations, the IWC has advanced both the understanding of the various issues and the means to manage them with increasing effectiveness. The IWC is likely to remain on the forefront of continuing efforts to address these, and other, conservation concerns and ensure the continued viability of cetacean populations around the globe.

  11. Beam commissioning for a superconducting proton linac

    Science.gov (United States)

    Wang, Zhi-Jun; He, Yuan; Jia, Huan; Dou, Wei-ping; Chen, Wei-long; Zhang, X. L.; Liu, Shu-hui; Feng, Chi; Tao, Yue; Wang, Wang-sheng; Wu, Jian-qiang; Zhang, Sheng-hu; Zhao, Hong-Wei

    2016-12-01

    To develop the next generation of safe and cleaner nuclear energy, the accelerator-driven subcritical (ADS) system emerges as one of the most attractive technologies. It will be able to transmute the long-lived transuranic radionuclides produced in the reactors of today's nuclear power plants into shorter-lived ones, and also it will provide positive energy output at the same time. The prototype of the Chinese ADS (C-ADS) proton accelerator comprises two injectors and a 1.5 GeV, 10 mA continuous wave (CW) superconducting main linac. The injector scheme II at the C-ADS demo facility inside the Institute of Modern Physics is a 10 MeV CW superconducting linac with a designed beam current of 10 mA, which includes an ECR ion source, a low-energy beam transport line, a 162.5 MHz radio frequency quadrupole accelerator, a medium-energy beam transport line, and a superconducting half wave resonator accelerator section. This demo facility has been successfully operating with an 11 mA, 2.7 MeV CW beam and a 3.9 mA, 4.3 MeV CW beam at different times and conditions since June 2014. The beam power has reached 28 kW, which is the highest record for the same type of linear accelerators. In this paper, the parameters of the test injector II and the progress of the beam commissioning are reported.

  12. Commissioning of the CMS High Level Trigger

    Energy Technology Data Exchange (ETDEWEB)

    Agostino, Lorenzo; et al.

    2009-08-01

    The CMS experiment will collect data from the proton-proton collisions delivered by the Large Hadron Collider (LHC) at a centre-of-mass energy up to 14 TeV. The CMS trigger system is designed to cope with unprecedented luminosities and LHC bunch-crossing rates up to 40 MHz. The unique CMS trigger architecture only employs two trigger levels. The Level-1 trigger is implemented using custom electronics, while the High Level Trigger (HLT) is based on software algorithms running on a large cluster of commercial processors, the Event Filter Farm. We present the major functionalities of the CMS High Level Trigger system as of the starting of LHC beams operations in September 2008. The validation of the HLT system in the online environment with Monte Carlo simulated data and its commissioning during cosmic rays data taking campaigns are discussed in detail. We conclude with the description of the HLT operations with the first circulating LHC beams before the incident occurred the 19th September 2008.

  13. The ATLAS Inner Detector commissioning and calibration

    CERN Document Server

    Aad, G.; Abdallah, J.; Abdelalim, A.A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; Abramowicz, H.; Abreu, H.; Acharya, B.S.; Adams, D.L.; Addy, T.N.; Adelman, J.; Adorisio, C.; Adragna, P.; Adye, T.; Aefsky, S.; Aguilar-Saavedra, J.A.; Aharrouche, M.; Ahlen, S.P.; Ahles, F.; Ahmad, A.; Ahsan, M.; Aielli, G.; Akdogan, T.; Akesson, T.P.A.; Akimoto, G.; Akimov, A.V.; Aktas, A.; Alam, M.S.; Alam, M.A.; Albert, J.; Albrand, S.; Aleksa, M.; Aleksandrov, I.N.; Alexa, C.; Alexander, G.; Alexandre, G.; Alexopoulos, T.; Alhroob, M.; Aliev, M.; Alimonti, G.; Alison, J.; Aliyev, M.; Allport, P.P.; Allwood-Spiers, S.E.; Almond, J.; Aloisio, A.; Alon, R.; Alonso, A.; Alviggi, M.G.; Amako, K.; Amelung, C.; Amorim, A.; Amoros, G.; Amram, N.; Anastopoulos, C.; Andeen, T.; Anders, C.F.; Anderson, K.J.; Andreazza, A.; Andrei, V.; Anduaga, X.S.; Angerami, A.; Anghinolfi, F.; Anjos, N.; Annovi, A.; Antonaki, A.; Antonelli, M.; Antonelli, S.; Antos, J.; Antunovic, B.; Anulli, F.; Aoun, S.; Arabidze, G.; Aracena, I.; Arai, Y.; Arce, A.T.H.; Archambault, J.P.; Arfaoui, S.; Arguin, J-F.; Argyropoulos, T.; Arik, M.; Armbruster, A.J.; Arnaez, O.; Arnault, C.; Artamonov, A.; Arutinov, D.; Asai, M.; Asai, S.; Asfandiyarov, R.; Ask, S.; Asman, B.; Asner, D.; Asquith, L.; Assamagan, K.; Astbury, A.; Astvatsatourov, A.; Atoian, G.; Auerbach, B.; Augsten, K.; Aurousseau, M.; Austin, N.; Avolio, G.; Avramidou, R.; Axen, D.; Ay, C.; Azuelos, G.; Azuma, Y.; Baak, M.A.; Bach, A.M.; Bachacou, H.; Bachas, K.; Backes, M.; Badescu, E.; Bagnaia, P.; Bai, Y.; Bain, T.; Baines, J.T.; Baker, O.K.; Baker, M.D.; Baker, S.; Baltasar Dos, F.Santos Pedrosa; Banas, E.; Banerjee, P.; Banerjee, S.; Banfi, D.; Bangert, A.; Bansal, V.; Baranov, S.P.; Baranov, S.; Barashkou, A.; Barber, T.; Barberio, E.L.; Barberis, D.; Barbero, M.; Bardin, D.Y.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnett, B.M.; Barnett, R.M.; Baroncelli, A.; Barr, A.J.; Barreiro, F.; Guimara, J.Barreiro; Barrillon, P.; Bartoldus, R.; Bartsch, D.; Bates, R.L.; Batkova, L.; Batley, J.R.; Battaglia, A.; Battistin, M.; Bauer, F.; Bawa, H.S.; Bazalova, M.; Beare, B.; Beau, T.; Beauchemin, P.H.; Beccherle, R.; Bechtle, P.; Beck, G.A.; Beck, H.P.; Beckingham, M.; Becks, K.H.; Beddall, A.J.; Beddall, A.; Bednyakov, V.A.; Bee, C.; Begel, M.; Behar Harpaz, S.; Behera, P.K.; Beimforde, M.; Belanger-Champagne, C.; Bell, P.J.; Bell, W.H.; Bella, G.; Bellagamba, L.; Bellina, F.; Bellomo, M.; Belloni, A.; Belotskiy, K.; Beltramello, O.; Ben Ami, S.; Benary, O.; Benchekroun, D.; Bendel, M.; Benedict, B.H.; Benekos, N.; Benhammou, Y.; Benincasa, G.P.; Benjamin, D.P.; Benoit, M.; Bensinger, J.R.; Benslama, K.; Bentvelsen, S.; Beretta, M.; Berge, D.; Bergeaas Kuutmann, E.; Berger, N.; Berghaus, F.; Berglund, E.; Beringer, J.; Bernat, P.; Bernhard, R.; Bernius, C.; Berry, T.; Bertin, A.; Besana, M.I.; Besson, N.; Bethke, S.; Bianchi, R.M.; Bianco, M.; Biebel, O.; Biesiada, J.; Biglietti, M.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biscarat, C.; Bitenc, U.; Black, K.M.; Blair, R.E.; Blanchard, J-B.; Blanchot, G.; Blocker, C.; Blondel, A.; Blum, W.; Blumenschein, U.; Bobbink, G.J.; Bocci, A.; Boehler, M.; Boek, J.; Boelaert, N.; Boser, S.; Bogaerts, J.A.; Bohm, C.; Bohm, J.; Boisvert, V.; Bold, T.; Boldea, V.; Bondarenko, V.G.; Bondioli, M.; Boonekamp, M.; Bordoni, S.; Borer, C.; Borisov, A.; Borissov, G.; Borjanovic, I.; Borroni, S.; Bos, K.; Boscherini, D.; Bosman, M.; Boterenbrood, H.; Bouchami, J.; Boudreau, J.; Bouhova-Thacker, E.V.; Boulahouache, C.; Bourdarios, C.; Boveia, A.; Boyd, J.; Boyko, I.R.; Bozovic-Jelisavcic, I.; Bracinik, J.; Braem, A.; Branchini, P.; Brandenburg, G.W.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J.E.; Braun, H.M.; Brelier, B.; Bremer, J.; Brenner, R.; Bressler, S.; Britton, D.; Brochu, F.M.; Brock, I.; Brock, R.; Brodet, E.; Bromberg, C.; Brooijmans, G.; Brooks, W.K.; Brown, G.; Bruckman de Renstrom, P.A.; Bruncko, D.; Bruneliere, R.; Brunet, S.; Bruni, A.; Bruni, G.; Bruschi, M.; Bucci, F.; Buchanan, J.; Buchholz, P.; Buckley, A.G.; Budagov, I.A.; Budick, B.; Buscher, V.; Bugge, L.; Bulekov, O.; Bunse, M.; Buran, T.; Burckhart, H.; Burdin, S.; Burgess, T.; Burke, S.; Busato, E.; Bussey, P.; Buszello, C.P.; Butin, F.; Butler, B.; Butler, J.M.; Buttar, C.M.; Butterworth, J.M.; Byatt, T.; Caballero, J.; Urban, S.Cabrera; Caforio, D.; Cakir, O.; Calafiura, P.; Calderini, G.; Calfayan, P.; Calkins, R.; Caloba, L.P.; Calvet, D.; Camarri, P.; Cameron, D.; Campana, S.; Campanelli, M.; Canale, V.; Canelli, F.; Canepa, A.; Cantero, J.; Capasso, L.; Capeans Garrido, M.D.M.; Caprini, I.; Caprini, M.; Capua, M.; Caputo, R.; Caramarcu, C.; Cardarelli, R.; Carli, T.; Carlino, G.; Carminati, L.; Caron, B.; Caron, S.; Carrillo Montoya, G.D.; Carron Montero, S.; Carter, A.A.; Carter, J.R.; Carvalho, J.; Casadei, D.; Casado, M.P.; Cascella, M.; Castaneda Hernadez, A.M.; Castaneda-Miranda, E.; Castillo Gimenez, V.; Castro, N.F.; Cataldi, G.; Catinaccio, A.; Catmore, J.R.; Cattai, A.; Cattani, G.; Caughron, S.; Cauz, D.; Cavalleri, P.; Cavalli, D.; Cavalli-Sforza, M.; Cavasinni, V.; Ceradini, F.; Cerqueira, A.S.; Cerri, A.; Cerrito, L.; Cerutti, F.; Cetin, S.A.; Chafaq, A.; Chakraborty, D.; Chan, K.; Chapman, J.D.; Chapman, J.W.; Chareyre, E.; Charlton, D.G.; Chavda, V.; Cheatham, S.; Chekanov, S.; Chekulaev, S.V.; Chelkov, G.A.; Chen, H.; Chen, S.; Chen, X.; Cheplakov, A.; Chepurnov, V.F.; Cherkaoui El, R.Moursli; Tcherniatine, V.; Chesneanu, D.; Cheu, E.; Cheung, S.L.; Chevalier, L.; Chevallier, F.; Chiarella, V.; Chiefari, G.; Chikovani, L.; Childers, J.T.; Chilingarov, A.; Chiodini, G.; Chizhov, V.; Choudalakis, G.; Chouridou, S.; Christidi, I.A.; Christov, A.; Chromek-Burckhart, D.; Chu, M.L.; Chudoba, J.; Ciapetti, G.; Ciftci, A.K.; Ciftci, R.; Cinca, D.; Cindro, V.; Ciobotaru, M.D.; Ciocca, C.; Ciocio, A.; Cirilli, M.; Citterio, M.; Clark, A.; Clark, P.J.; Cleland, W.; Clemens, J.C.; Clement, B.; Clement, C.; Coadou, Y.; Cobal, M.; Coccaro, A.; Cochran, J.; Coggeshall, J.; Cogneras, E.; Colijn, A.P.; Collard, C.; Collins, N.J.; Collins-Tooth, C.; Collot, J.; Colon, G.; Muino, P.Conde; Coniavitis, E.; Conidi, M.C.; Consonni, M.; Constantinescu, S.; Conta, C.; Conventi, F.; Cooke, M.; Cooper, B.D.; Cooper-Sarkar, A.M.; Cooper-Smith, N.J.; Copic, K.; Cornelissen, T.; Corradi, M.; Corriveau, F.; Corso-Radu, A.; Cortes-Gonzalez, A.; Cortiana, G.; Costa, G.; Costa, M.J.; Costanzo, D.; Costin, T.; Cote, D.; Coura Torres, R.; Courneyea, L.; Cowan, G.; Cowden, C.; Cox, B.E.; Cranmer, K.; Cranshaw, J.; Cristinziani, M.; Crosetti, G.; Crupi, R.; Crepe-Renaudin, S.; Cuenca Almenar, C.; Cuhadar Donszelmann, T.; Curatolo, M.; Curtis, C.J.; Cwetanski, P.; Czyczula, Z.; D'Auria, S.; D'Onofrio, M.; D'Orazio, A.; Da Via, C.; Dabrowski, W.; Dai, T.; Dallapiccola, C.; Dam, M.; Danielsson, H.O.; Dannheim, D.; Dao, V.; Darbo, G.; Darlea, G.L.; Davey, W.; Davidek, T.; Davidson, N.; Davidson, R.; Davies, M.; Davison, A.R.; Dawson, I.; Daya, R.K.; De, K.; de Asmundis, R.; De Castro, S.; De Castro, P.E.Faria Salgado; De Cecco, S.; de Graat, J.; De Groot, N.; de Jong, P.; De Mora, L.; De Oliveira, M.Branco; De Pedis, D.; De Salvo, A.; De Sanctis, U.; De Santo, A.; De Vivie De Regie, J.B.; De Zorzi, G.; Dean, S.; Dedovich, D.V.; Degenhardt, J.; Dehchar, M.; Del Papa, C.; Del Peso, J.; Del Prete, T.; Dell'Acqua, A.; Dell'Asta, L.; Della Pietra, M.; della Volpe, D.; Delmastro, M.; Delsart, P.A.; Deluca, C.; Demers, S.; Demichev, M.; Demirkoz, B.; Deng, J.; Deng, W.; Denisov, S.P.; Derkaoui, J.E.; Derue, F.; Dervan, P.; Desch, K.; Deviveiros, P.O.; Dewhurst, A.; DeWilde, B.; Dhaliwal, S.; Dhullipudi, R.; Di Ciaccio, A.; Di Ciaccio, L.; Di Domenico, A.; Di Girolamo, A.; Di Girolamo, B.; Di Luise, S.; Di Mattia, A.; Di Nardo, R.; Di Simone, A.; Di Sipio, R.; Diaz, M.A.; Diblen, F.; Diehl, E.B.; Dietrich, J.; Dietzsch, T.A.; Diglio, S.; Dindar Yagci, K.; Dingfelder, D.J.; Dionisi, C.; Dita, P.; Dita, S.; Dittus, F.; Djama, F.; Djilkibaev, R.; Djobava, T.; Vale, M.A.B.do; Do Valle, A.Wemans; Doan, T.K.O.; Dobos, D.; Dobson, E.; Dobson, M.; Doglioni, C.; Doherty, T.; Dolejsi, J.; Dolenc, I.; Dolezal, Z.; Dolgoshein, B.A.; Dohmae, T.; Donega, M.; Donini, J.; Dopke, J.; Doria, A.; Dos Anjos, A.; Dotti, A.; Dova, M.T.; Doxiadis, A.; Doyle, A.T.; Drasal, Z.; Dris, M.; Dubbert, J.; Duchovni, E.; Duckeck, G.; Dudarev, A.; Dudziak, F.; Duhrssen, M.; Duflot, L.; Dufour, M-A.; Dunford, M.; Duran Yildiz, H.; Dushkin, A.; Duxfield, R.; Dwuznik, M.; Duren, M.; Ebenstein, W.L.; Ebke, J.; Eckweiler, S.; Edmonds, K.; Edwards, C.A.; Egorov, K.; Ehrenfeld, W.; Ehrich, T.; Eifert, T.; Eigen, G.; Einsweiler, K.; Eisenhandler, E.; Ekelof, T.; El Kacimi, M.; Ellert, M.; Elles, S.; Ellinghaus, F.; Ellis, K.; Ellis, N.; Elmsheuser, J.; Elsing, M.; Emeliyanov, D.; Engelmann, R.; Engl, A.; Epp, B.; Eppig, A.; Erdmann, J.; Ereditato, A.; Eriksson, D.; Ermoline, I.; Ernst, J.; Ernst, M.; Ernwein, J.; Errede, D.; Errede, S.; Ertel, E.; Escalier, M.; Escobar, C.; Espinal Curull, X.; Esposito, B.; Etienvre, A.I.; Etzion, E.; Evans, H.; Fabbri, L.; Fabre, C.; Facius, K.; Fakhrutdinov, R.M.; Falciano, S.; Fang, Y.; Fanti, M.; Farbin, A.; Farilla, A.; Farley, J.; Farooque, T.; Farrington, S.M.; Farthouat, P.; Fassnacht, P.; Fassouliotis, D.; Fatholahzadeh, B.; Fayard, L.; Fayette, F.; Febbraro, R.; Federic, P.; Fedin, O.L.; Fedorko, W.; Feligioni, L.; Felzmann, C.U.; Feng, C.; Feng, E.J.; Fenyuk, A.B.; Ferencei, J.; Ferland, J.; Fernandes, B.; Fernando, W.; Ferrag, S.; Ferrando, J.; Ferrara, V.; Ferrari, A.; Ferrari, P.; Ferrari, R.; Ferrer, A.; Ferrer, M.L.; Ferrere, D.; Ferretti, C.; Fiascaris, M.; Fiedler, F.; Filipcic, A.; Filippas, A.; Filthaut, F.; Fincke-Keeler, M.; Fiolhais, M.C.N.; Fiorini, L.; Firan, A.; Fischer, G.; Fisher, M.J.; Flechl, M.; Fleck, I.; Fleckner, J.; Fleischmann, P.; Fleischmann, S.; Flick, T.; Flores Castillo, L.R.; Flowerdew, M.J.; Fonseca Martin, T.; Formica, A.; Forti, A.; Fortin, D.; Fournier, D.; Fowler, A.J.; Fowler, K.; Fox, H.; Francavilla, P.; Franchino, S.; Francis, D.; Franklin, M.; Franz, S.; Fraternali, M.; Fratina, S.; Freestone, J.; French, S.T.; Froeschl, R.; Froidevaux, D.; Frost, J.A.; Fukunaga, C.; Fullana Torregrosa, E.; Fuster, J.; Gabaldon, C.; Gabizon, O.; Gadfort, T.; Gadomski, S.; Gagliardi, G.; Gagnon, P.; Galea, C.; Gallas, E.J.; Gallo, V.; Gallop, B.J.; Gallus, P.; Galyaev, E.; Gan, K.K.; Gao, Y.S.; Gaponenko, A.; Garcia-Sciveres, M.; Garcia, C.; Navarro, J.E.Garcia; Gardner, R.W.; Garelli, N.; Garitaonandia, H.; Garonne, V.; Gatti, C.; Gaudio, G.; Gauzzi, P.; Gavrilenko, I.L.; Gay, C.; Gaycken, G.; Gazis, E.N.; Ge, P.; Gee, C.N.P.; Geich-Gimbel, Ch.; Gellerstedt, K.; Gemme, C.; Genest, M.H.; Gentile, S.; Georgatos, F.; George, S.; Gershon, A.; Ghazlane, H.; Ghodbane, N.; Giacobbe, B.; Giagu, S.; Giakoumopoulou, V.; Giangiobbe, V.; Gianotti, F.; Gibbard, B.; Gibson, A.; Gibson, S.M.; Gilbert, L.M.; Gilchriese, M.; Gilewsky, V.; Gingrich, D.M.; Ginzburg, J.; Giokaris, N.; Giordani, M.P.; Giordano, R.; Giorgi, F.M.; Giovannini, P.; Giraud, P.F.; Girtler, P.; Giugni, D.; Giusti, P.; Gjelsten, B.K.; Gladilin, L.K.; Glasman, C.; Glazov, A.; Glitza, K.W.; Glonti, G.L.; Godfrey, J.; Godlewski, J.; Goebel, M.; Gopfert, T.; Goeringer, C.; Gossling, C.; Gottfert, T.; Goggi, V.; Goldfarb, S.; Goldin, D.; Golling, T.; Gomes, A.; Gomez Fajardo, L.S.; Goncalo, R.; Gonella, L.; Gong, C.; Gonzalez de la Hoz, S.; Gonzalez Silva, M.L.; Gonzalez-Sevilla, S.; Goodson, J.J.; Goossens, L.; Gordon, H.A.; Gorelov, I.; Gorfine, G.; Gorini, B.; Gorini, E.; Gorisek, A.; Gornicki, E.; Gosdzik, B.; Gosselink, M.; Gostkin, M.I.; Gough Eschrich, I.; Gouighri, M.; Goujdami, D.; Goulette, M.P.; Goussiou, A.G.; Goy, C.; Grabowska-Bold, I.; Grafstrom, P.; Grahn, K-J.; Grancagnolo, S.; Grassi, V.; Gratchev, V.; Grau, N.; Gray, H.M.; Gray, J.A.; Graziani, E.; Green, B.; Greenshaw, T.; Greenwood, Z.D.; Gregor, I.M.; Grenier, P.; Griesmayer, E.; Griffiths, J.; Grigalashvili, N.; Grillo, A.A.; Grimm, K.; Grinstein, S.; Grishkevich, Y.V.; Groh, M.; Groll, M.; Gross, E.; Grosse-Knetter, J.; Groth-Jensen, J.; Grybel, K.; Guicheney, C.; Guida, A.; Guillemin, T.; Guler, H.; Gunther, J.; Guo, B.; Gusakov, Y.; Gutierrez, A.; Gutierrez, P.; Guttman, N.; Gutzwiller, O.; Guyot, C.; Gwenlan, C.; Gwilliam, C.B.; Haas, A.; Haas, S.; Haber, C.; Hadavand, H.K.; Hadley, D.R.; Haefner, P.; Hartel, R.; Hajduk, Z.; Hakobyan, H.; Haller, J.; Hamacher, K.; Hamilton, A.; Hamilton, S.; Han, L.; Hanagaki, K.; Hance, M.; Handel, C.; Hanke, P.; Hansen, J.R.; Hansen, J.B.; Hansen, J.D.; Hansen, P.H.; Hansl-Kozanecka, T.; Hansson, P.; Hara, K.; Hare, G.A.; Harenberg, T.; Harrington, R.D.; Harris, O.M.; Harrison, K.; Hartert, J.; Hartjes, F.; Harvey, A.; Hasegawa, S.; Hasegawa, Y.; Hashemi, K.; Hassani, S.; Haug, S.; Hauschild, M.; Hauser, R.; Havranek, M.; Hawkes, C.M.; Hawkings, R.J.; Hayakawa, T.; Hayward, H.S.; Haywood, S.J.; Head, S.J.; Hedberg, V.; Heelan, L.; Heim, S.; Heinemann, B.; Heisterkamp, S.; Helary, L.; Heller, M.; Hellman, S.; Helsens, C.; Hemperek, T.; Henderson, R.C.W.; Henke, M.; Henrichs, A.; Henriques Correia, A.M.; Henrot-Versille, S.; Hensel, C.; Henss, T.; Hernandez Jimenez, Y.; Hershenhorn, A.D.; Herten, G.; Hertenberger, R.; Hervas, L.; Hessey, N.P.; Higon-Rodriguez, E.; Hill, J.C.; Hiller, K.H.; Hillert, S.; Hillier, S.J.; Hinchliffe, I.; Hines, E.; Hirose, M.; Hirsch, F.; Hirschbuehl, D.; Hobbs, J.; Hod, N.; Hodgkinson, M.C.; Hodgson, P.; Hoecker, A.; Hoeferkamp, M.R.; Hoffman, J.; Hoffmann, D.; Hohlfeld, M.; Holy, T.; Holzbauer, J.L.; Homma, Y.; Horazdovsky, T.; Hori, T.; Horn, C.; Horner, S.; Horvat, S.; Hostachy, J-Y.; Hou, S.; Hoummada, A.; Howe, T.; Hrivnac, J.; Hryn'ova, T.; Hsu, P.J.; Hsu, S.C.; Huang, G.S.; Hubacek, Z.; Hubaut, F.; Huegging, F.; Huffman, T.B.; Hughes, E.W.; Hughes, G.; Hurwitz, M.; Husemann, U.; Huseynov, N.; Huston, J.; Huth, J.; Iacobucci, G.; Iakovidis, G.; Ibragimov, I.; Iconomidou-Fayard, L.; Idarraga, J.; Iengo, P.; Igonkina, O.; Ikegami, Y.; Ikeno, M.; Ilchenko, Y.; Iliadis, D.; Ince, T.; Ioannou, P.; Iodice, M.; Irles Quiles, A.; Ishikawa, A.; Ishino, M.; Ishmukhametov, R.; Isobe, T.; Issever, C.; Istin, S.; Itoh, Y.; Ivashin, A.V.; Iwasaki, H.; Izen, J.M.; Izzo, V.; Jackson, B.; Jackson, J.N.; Jackson, P.; Jaekel, M.R.; Jain, V.; Jakobs, K.; Jakobsen, S.; Jakubek, J.; Jana, D.; Jankowski, E.; Jansen, E.; Jantsch, A.; Janus, M.; Jared, R.C.; Jarlskog, G.; Jeanty, L.; Plante, I.Jen-La; Jenni, P.; Jez, P.; Jezequel, S.; Ji, W.; Jia, J.; Jiang, Y.; Jimenez Belenguer, M.; Jin, S.; Jinnouchi, O.; Joffe, D.; Johansen, M.; Johansson, K.E.; Johansson, P.; Johnert, S.; Johns, K.A.; Jon-And, K.; Jones, G.; Jones, R.W.L.; Jones, T.J.; Jorge, P.M.; Joseph, J.; Juranek, V.; Jussel, P.; Kabachenko, V.V.; Kaci, M.; Kaczmarska, A.; Kado, M.; Kagan, H.; Kagan, M.; Kaiser, S.; Kajomovitz, E.; Kalinin, S.; Kalinovskaya, L.V.; Kama, S.; Kanaya, N.; Kaneda, M.; Kantserov, V.A.; Kanzaki, J.; Kaplan, B.; Kapliy, A.; Kaplon, J.; Kar, D.; Karagounis, M.; Karagoz Unel, M.; Karnevskiy, M.; Kartvelishvili, V.; Karyukhin, A.N.; Kashif, L.; Kasmi, A.; Kass, R.D.; Kastanas, A.; Kastoryano, M.; Kataoka, M.; Kataoka, Y.; Katsoufis, E.; Katzy, J.; Kaushik, V.; Kawagoe, K.; Kawamoto, T.; Kawamura, G.; Kayl, M.S.; Kayumov, F.; Kazanin, V.A.; Kazarinov, M.Y.; Keates, J.R.; Keeler, R.; Keener, P.T.; Kehoe, R.; Keil, M.; Kekelidze, G.D.; Kelly, M.; Kenyon, M.; Kepka, O.; Kerschen, N.; Kersevan, B.P.; Kersten, S.; Kessoku, K.; Khakzad, M.; Khalil-zada, F.; Khandanyan, H.; Khanov, A.; Kharchenko, D.; Khodinov, A.; Khomich, A.; Khoriauli, G.; Khovanskiy, N.; Khovanskiy, V.; Khramov, E.; Khubua, J.; Kim, H.; Kim, M.S.; Kim, P.C.; Kim, S.H.; Kind, O.; Kind, P.; King, B.T.; Kirk, J.; Kirsch, G.P.; Kirsch, L.E.; Kiryunin, A.E.; Kisielewska, D.; Kittelmann, T.; Kiyamura, H.; Kladiva, E.; Klein, M.; Klein, U.; Kleinknecht, K.; Klemetti, M.; Klier, A.; Klimentov, A.; Klingenberg, R.; Klinkby, E.B.; Klioutchnikova, T.; Klok, P.F.; Klous, S.; Kluge, E.E.; Kluge, T.; Kluit, P.; Klute, M.; Kluth, S.; Knecht, N.S.; Kneringer, E.; Ko, B.R.; Kobayashi, T.; Kobel, M.; Koblitz, B.; Kocian, M.; Kocnar, A.; Kodys, P.; Koneke, K.; Konig, A.C.; Koenig, S.; Kopke, L.; Koetsveld, F.; Koevesarki, P.; Koffas, T.; Koffeman, E.; Kohn, F.; Kohout, Z.; Kohriki, T.; Kolanoski, H.; Kolesnikov, V.; Koletsou, I.; Koll, J.; Kollar, D.; Kolos, S.; Kolya, S.D.; Komar, A.A.; Komaragiri, J.R.; Kondo, T.; Kono, T.; Konoplich, R.; Konovalov, S.P.; Konstantinidis, N.; Koperny, S.; Korcyl, K.; Kordas, K.; Korn, A.; Korolkov, I.; Korolkova, E.V.; Korotkov, V.A.; Kortner, O.; Kostka, P.; Kostyukhin, V.V.; Kotov, S.; Kotov, V.M.; Kotov, K.Y.; Kourkoumelis, C.; Koutsman, A.; Kowalewski, R.; Kowalski, H.; Kowalski, T.Z.; Kozanecki, W.; Kozhin, A.S.; Kral, V.; Kramarenko, V.A.; Kramberger, G.; Krasny, M.W.; Krasznahorkay, A.; Kraus, J.; Kreisel, A.; Krejci, F.; Kretzschmar, J.; Krieger, N.; Krieger, P.; Kroeninger, K.; Kroha, H.; Kroll, J.; Kroseberg, J.; Krstic, J.; Kruchonak, U.; Kruger, H.; Krumshteyn, Z.V.; Kubota, T.; Kuehn, S.; Kugel, A.; Kuhl, T.; Kuhn, D.; Kukhtin, V.; Kulchitsky, Y.; Kuleshov, S.; Kummer, C.; Kuna, M.; Kunkle, J.; Kupco, A.; Kurashige, H.; Kurata, M.; Kurchaninov, L.L.; Kurochkin, Y.A.; Kus, V.; Kwee, R.; La Rosa, A.; La Rotonda, L.; Labbe, J.; Lacasta, C.; Lacava, F.; Lacker, H.; Lacour, D.; Lacuesta, V.R.; Ladygin, E.; Lafaye, R.; Laforge, B.; Lagouri, T.; Lai, S.; Lamanna, M.; Lampen, C.L.; Lampl, W.; Lancon, E.; Landgraf, U.; Landon, M.P.J.; Lane, J.L.; Lankford, A.J.; Lanni, F.; Lantzsch, K.; Lanza, A.; Laplace, S.; Lapoire, C.; Laporte, J.F.; Lari, T.; Larner, A.; Lassnig, M.; Laurelli, P.; Lavrijsen, W.; Laycock, P.; Lazarev, A.B.; Lazzaro, A.; Le Dortz, O.; Le Guirriec, E.; Le Menedeu, E.; Le Vine, M.; Lebedev, A.; Lebel, C.; LeCompte, T.; Ledroit-Guillon, F.; Lee, H.; Lee, J.S.H.; Lee, S.C.; Lefebvre, M.; Legendre, M.; LeGeyt, B.C.; Legger, F.; Leggett, C.; Lehmacher, M.; Lehmann Miotto, G.; Lei, X.; Leitner, R.; Lellouch, D.; Lellouch, J.; Lendermann, V.; Leney, K.J.C.; Lenz, T.; Lenzen, G.; Lenzi, B.; Leonhardt, K.; Leroy, C.; Lessard, J-R.; Lester, C.G.; Leung Fook, A.Cheong; Leveque, J.; Levin, D.; Levinson, L.J.; Leyton, M.; Li, H.; Li, X.; Liang, Z.; Liang, Z.; Liberti, B.; Lichard, P.; Lichtnecker, M.; Lie, K.; Liebig, W.; Lilley, J.N.; Limosani, A.; Limper, M.; Lin, S.C.; Linnemann, J.T.; Lipeles, E.; Lipinsky, L.; Lipniacka, A.; Liss, T.M.; Lissauer, D.; Lister, A.; Litke, A.M.; Liu, C.; Liu, D.; Liu, H.; Liu, J.B.; Liu, M.; Liu, T.; Liu, Y.; Livan, M.; Lleres, A.; Lloyd, S.L.; Lobodzinska, E.; Loch, P.; Lockman, W.S.; Lockwitz, S.; Loddenkoetter, T.; Loebinger, F.K.; Loginov, A.; Loh, C.W.; Lohse, T.; Lohwasser, K.; Lokajicek, M.; Long, R.E.; Lopes, L.; Lopez Mateos, D.; Losada, M.; Loscutoff, P.; Lou, X.; Lounis, A.; Loureiro, K.F.; Lovas, L.; Love, J.; Love, P.A.; Lowe, A.J.; Lu, F.; Lubatti, H.J.; Luci, C.; Lucotte, A.; Ludwig, A.; Ludwig, D.; Ludwig, I.; Luehring, F.; Luisa, L.; Lumb, D.; Luminari, L.; Lund, E.; Lund-Jensen, B.; Lundberg, B.; Lundberg, J.; Lundquist, J.; Lynn, D.; Lys, J.; Lytken, E.; Ma, H.; Ma, L.L.; Macana Goia, J.A.; Maccarrone, G.; Macchiolo, A.; Macek, B.; Machado Miguens, J.; Mackeprang, R.; Madaras, R.J.; Mader, W.F.; Maenner, R.; Maeno, T.; Mattig, P.; Mattig, S.; Magalhaes Martins, P.J.; Magradze, E.; Mahalalel, Y.; Mahboubi, K.; Mahmood, A.; Maiani, C.; Maidantchik, C.; Maio, A.; Majewski, S.; Makida, Y.; Makouski, M.; Makovec, N.; Malecki, Pa.; Malecki, P.; Maleev, V.P.; Malek, F.; Mallik, U.; Malon, D.; Maltezos, S.; Malyshev, V.; Malyukov, S.; Mambelli, M.; Mameghani, R.; Mamuzic, J.; Mandelli, L.; Mandic, I.; Mandrysch, R.; Maneira, J.; Mangeard, P.S.; Manjavidze, I.D.; Manning, P.M.; Manousakis-Katsikakis, A.; Mansoulie, B.; Mapelli, A.; Mapelli, L.; March, L.; Marchand, J.F.; Marchese, F.; Marchiori, G.; Marcisovsky, M.; Marino, C.P.; Marroquim, F.; Marshall, Z.; Marti-Garcia, S.; Martin, A.J.; Martin, A.J.; Martin, B.; Martin, B.; Martin, F.F.; Martin, J.P.; Martin, T.A.; Dit Latour, B.Martin; Martinez, M.; Martinez Outschoorn, V.; Martini, A.; Martyniuk, A.C.; Marzano, F.; Marzin, A.; Masetti, L.; Mashimo, T.; Mashinistov, R.; Masik, J.; Maslennikov, A.L.; Massa, I.; Massol, N.; Mastroberardino, A.; Masubuchi, T.; Matsunaga, H.; Matsushita, T.; Mattravers, C.; Maxfield, S.J.; Mayne, A.; Mazini, R.; Mazur, M.; Mazzanti, M.; Mc Donald, J.; Mc Kee, S.P.; McCarn, A.; McCarthy, R.L.; McCubbin, N.A.; McFarlane, K.W.; McGlone, H.; Mchedlidze, G.; McMahon, S.J.; McPherson, R.A.; Meade, A.; Mechnich, J.; Mechtel, M.; Medinnis, M.; Meera-Lebbai, R.; Meguro, T.M.; Mehlhase, S.; Mehta, A.; Meier, K.; Meirose, B.; Melachrinos, C.; Mellado Garcia, B.R.; Mendoza Navas, L.; Meng, Z.; Menke, S.; Meoni, E.; Mermod, P.; Merola, L.; Meroni, C.; Merritt, F.S.; Messina, A.M.; Metcalfe, J.; Mete, A.S.; Meyer, J-P.; Meyer, J.; Meyer, J.; Meyer, T.C.; Meyer, W.T.; Miao, J.; Michal, S.; Micu, L.; Middleton, R.P.; Migas, S.; Mijovic, L.; Mikenberg, G.; Mikestikova, M.; Mikuz, M.; Miller, D.W.; Mills, W.J.; Mills, C.M.; Milov, A.; Milstead, D.A.; Milstein, D.; Minaenko, A.A.; Minano, M.; Minashvili, I.A.; Mincer, A.I.; Mindur, B.; Mineev, M.; Ming, Y.; Mir, L.M.; Mirabelli, G.; Misawa, S.; Miscetti, S.; Misiejuk, A.; Mitrevski, J.; Mitsou, V.A.; Miyagawa, P.S.; Mjornmark, J.U.; Mladenov, D.; Moa, T.; Moed, S.; Moeller, V.; Monig, K.; Moser, N.; Mohr, W.; Mohrdieck-Mock, S.; Moles-Valls, R.; Molina-Perez, J.; Monk, J.; Monnier, E.; Montesano, S.; Monticelli, F.; Moore, R.W.; Mora Herrera, C.; Moraes, A.; Morais, A.; Morel, J.; Morello, G.; Moreno, D.; Llacer, M.Moreno; Morettini, P.; Morii, M.; Morley, A.K.; Mornacchi, G.; Morozov, S.V.; Morris, J.D.; Moser, H.G.; Mosidze, M.; Moss, J.; Mount, R.; Mountricha, E.; Mouraviev, S.V.; Moyse, E.J.W.; Mudrinic, M.; Mueller, F.; Mueller, J.; Mueller, K.; Muller, T.A.; Muenstermann, D.; Muir, A.; Munwes, Y.; Murillo Garcia, R.; Murray, W.J.; Mussche, I.; Musto, E.; Myagkov, A.G.; Myska, M.; Nadal, J.; Nagai, K.; Nagano, K.; Nagasaka, Y.; Nairz, A.M.; Nakamura, K.; Nakano, I.; Nakatsuka, H.; Nanava, G.; Napier, A.; Nash, M.; Nation, N.R.; Nattermann, T.; Naumann, T.; Navarro, G.; Nderitu, S.K.; Neal, H.A.; Nebot, E.; Nechaeva, P.; Negri, A.; Negri, G.; Nelson, A.; Nelson, T.K.; Nemecek, S.; Nemethy, P.; Nepomuceno, A.A.; Nessi, M.; Neubauer, M.S.; Neusiedl, A.; Neves, R.N.; Nevski, P.; Newcomer, F.M.; Nickerson, R.B.; Nicolaidou, R.; Nicolas, L.; Nicoletti, G.; Nicquevert, B.; Niedercorn, F.; Nielsen, J.; Nikiforov, A.; Nikolaev, K.; Nikolic-Audit, I.; Nikolopoulos, K.; Nilsen, H.; Nilsson, P.; Nisati, A.; Nishiyama, T.; Nisius, R.; Nodulman, L.; Nomachi, M.; Nomidis, I.; Nordberg, M.; Nordkvist, B.; Notz, D.; Novakova, J.; Nozaki, M.; Nozicka, M.; Nugent, I.M.; Nuncio-Quiroz, A.E.; Nunes Hanninger, G.; Nunnemann, T.; Nurse, E.; O'Neil, D.C.; O'Shea, V.; Oakham, F.G.; Oberlack, H.; Ochi, A.; Oda, S.; Odaka, S.; Odier, J.; Ogren, H.; Oh, A.; Oh, S.H.; Ohm, C.C.; Ohshima, T.; Ohshita, H.; Ohsugi, T.; Okada, S.; Okawa, H.; Okumura, Y.; Okuyama, T.; Olchevski, A.G.; Oliveira, M.; Oliveira Damazio, D.; Oliver, J.; Oliver Garcia, E.; Olivito, D.; Olszewski, A.; Olszowska, J.; Omachi, C.; Onofre, A.; Onyisi, P.U.E.; Oram, C.J.; Oreglia, M.J.; Oren, Y.; Orestano, D.; Orlov, I.; Oropeza Barrera, C.; Orr, R.S.; Ortega, E.O.; Osculati, B.; Ospanov, R.; Osuna, C.; Ottersbach, J.P.; Ould-Saada, F.; Ouraou, A.; Ouyang, Q.; Owen, M.; Owen, S.; Oyarzun, A.; Ozcan, V.E.; Ozone, K.; Ozturk, N.; Pacheco Pages, A.; Padilla Aranda, C.; Paganis, E.; Pahl, C.; Paige, F.; Pajchel, K.; Palestini, S.; Pallin, D.; Palma, A.; Palmer, J.D.; Pan, Y.B.; Panagiotopoulou, E.; Panes, B.; Panikashvili, N.; Panitkin, S.; Pantea, D.; Panuskova, M.; Paolone, V.; Papadopoulou, Th.D.; Park, S.J.; Park, W.; Parker, M.A.; Parker, S.I.; Parodi, F.; Parsons, J.A.; Parzefall, U.; Pasqualucci, E.; Passeri, A.; Pastore, F.; Pastore, Fr.; Pasztor, G.; Pataraia, S.; Pater, J.R.; Patricelli, S.; Patwa, A.; Pauly, T.; Peak, L.S.; Pecsy, M.; Pedraza Morales, M.I.; Peleganchuk, S.V.; Peng, H.; Penson, A.; Penwell, J.; Perantoni, M.; Perez, K.; Perez Codina, E.; Perez Garcia-Estan, M.T.; Perez Reale, V.; Perini, L.; Pernegger, H.; Perrino, R.; Persembe, S.; Perus, P.; Peshekhonov, V.D.; Petersen, B.A.; Petersen, T.C.; Petit, E.; Petridou, C.; Petrolo, E.; Petrucci, F.; Petschull, D.; Petteni, M.; Pezoa, R.; Phan, A.; Phillips, A.W.; Piacquadio, G.; Piccinini, M.; Piegaia, R.; Pilcher, J.E.; Pilkington, A.D.; Pina, J.; Pinamonti, M.; Pinfold, J.L.; Pinto, B.; Pizio, C.; Placakyte, R.; Plamondon, M.; Pleier, M.A.; Poblaguev, A.; Poddar, S.; Podlyski, F.; Poffenberger, P.; Poggioli, L.; Pohl, M.; Polci, F.; Polesello, G.; Policicchio, A.; Polini, A.; Poll, J.; Polychronakos, V.; Pomeroy, D.; Pommes, K.; Pontecorvo, L.; Pope, B.G.; Popovic, D.S.; Poppleton, A.; Popule, J.; Portell Bueso, X.; Porter, R.; Pospelov, G.E.; Pospisil, S.; Potekhin, M.; Potrap, I.N.; Potter, C.J.; Potter, C.T.; Potter, K.P.; Poulard, G.; Poveda, J.; Prabhu, R.; Pralavorio, P.; Prasad, S.; Pravahan, R.; Pribyl, L.; Price, D.; Price, L.E.; Prichard, P.M.; Prieur, D.; Primavera, M.; Prokofiev, K.; Prokoshin, F.; Protopopescu, S.; Proudfoot, J.; Prudent, X.; Przysiezniak, H.; Psoroulas, S.; Ptacek, E.; Puigdengoles, C.; Purdham, J.; Purohit, M.; Puzo, P.; Pylypchenko, Y.; Qi, M.; Qian, J.; Qian, W.; Qin, Z.; Quadt, A.; Quarrie, D.R.; Quayle, W.B.; Quinonez, F.; Raas, M.; Radeka, V.; Radescu, V.; Radics, B.; Rador, T.; Ragusa, F.; Rahal, G.; Rahimi, A.M.; Rajagopalan, S.; Rammensee, M.; Rammes, M.; Rauscher, F.; Rauter, E.; Raymond, M.; Read, A.L.; Rebuzzi, D.M.; Redelbach, A.; Redlinger, G.; Reece, R.; Reeves, K.; Reinherz-Aronis, E.; Reinsch, A.; Reisinger, I.; Reljic, D.; Rembser, C.; Ren, Z.L.; Renkel, P.; Rescia, S.; Rescigno, M.; Resconi, S.; Resende, B.; Reznicek, P.; Rezvani, R.; Richards, A.; Richards, R.A.; Richter, R.; Richter-Was, E.; Ridel, M.; Rijpstra, M.; Rijssenbeek, M.; Rimoldi, A.; Rinaldi, L.; Rios, R.R.; Riu, I.; Rizatdinova, F.; Rizvi, E.; Roa Romero, D.A.; Robertson, S.H.; Robichaud-Veronneau, A.; Robinson, D.; Robinson, J.E.M.; Robinson, M.; Robson, A.; Rocha de Lima, J.G.; Roda, C.; Roda Dos, D.Santos; Rodriguez, D.; Rodriguez Garcia, Y.; Roe, S.; Rohne, O.; Rojo, V.; Rolli, S.; Romaniouk, A.; Romanov, V.M.; Romeo, G.; Romero Maltrana, D.; Roos, L.; Ros, E.; Rosati, S.; Rosenbaum, G.A.; Rosselet, L.; Rossetti, V.; Rossi, L.P.; Rotaru, M.; Rothberg, J.; Rousseau, D.; Royon, C.R.; Rozanov, A.; Rozen, Y.; Ruan, X.; Ruckert, B.; Ruckstuhl, N.; Rud, V.I.; Rudolph, G.; Ruhr, F.; Ruggieri, F.; Ruiz-Martinez, A.; Rumyantsev, L.; Rurikova, Z.; Rusakovich, N.A.; Rutherfoord, J.P.; Ruwiedel, C.; Ruzicka, P.; Ryabov, Y.F.; Ryan, P.; Rybkin, G.; Rzaeva, S.; Saavedra, A.F.; Sadrozinski, H.F-W.; Sadykov, R.; Safai Tehrani, F.; Sakamoto, H.; Salamanna, G.; Salamon, A.; Saleem, M.S.; Salihagic, D.; Salnikov, A.; Salt, J.; Salvachua Ferrando, B.M.; Salvatore, D.; Salvatore, F.; Salvucci, A.; Salzburger, A.; Sampsonidis, D.; Samset, B.H.; Sanchis Lozano, M.A.; Sandaker, H.; Sander, H.G.; Sanders, M.P.; Sandhoff, M.; Sandhu, P.; Sandstroem, R.; Sandvoss, S.; Sankey, D.P.C.; Sanny, B.; Sansoni, A.; Santamarina Rios, C.; Santoni, C.; Santonico, R.; Saraiva, J.G.; Sarangi, T.; Sarkisyan-Grinbaum, E.; Sarri, F.; Sasaki, O.; Sasao, N.; Satsounkevitch, I.; Sauvage, G.; Savard, P.; Savine, A.Y.; Savinov, V.; Sawyer, L.; Saxon, D.H.; Says, L.P.; Sbarra, C.; Sbrizzi, A.; Scannicchio, D.A.; Schaarschmidt, J.; Schacht, P.; Schafer, U.; Schaetzel, S.; Schaffer, A.C.; Schaile, D.; Schamberger, R.D.; Schamov, A.G.; Scharf, V.; Schegelsky, V.A.; Scheirich, D.; Schernau, M.; Scherzer, M.I.; Schiavi, C.; Schieck, J.; Schioppa, M.; Schlenker, S.; Schmidt, E.S.; Schmieden, K.; Schmitt, C.; Schmitz, M.; Schonig, A.; Schott, M.; Schouten, D.; Schovancova, J.; Schram, M.; Schreiner, A.; Schroeder, C.; Schroer, N.; Schroers, M.; Schultes, J.; Schultz-Coulon, H.C.; Schumacher, J.W.; Schumacher, M.; Schumm, B.A.; Schune, Ph.; Schwanenberger, C.; Schwartzman, A.; Schwemling, Ph.; Schwienhorst, R.; Schwierz, R.; Schwindling, J.; Scott, W.G.; Searcy, J.; Sedykh, E.; Segura, E.; Seidel, S.C.; Seiden, A.; Seifert, F.; Seixas, J.M.; Sekhniaidze, G.; Seliverstov, D.M.; Sellden, B.; Semprini-Cesari, N.; Serfon, C.; Serin, L.; Seuster, R.; Severini, H.; Sevior, M.E.; Sfyrla, A.; Shabalina, E.; Shamim, M.; Shan, L.Y.; Shank, J.T.; Shao, Q.T.; Shapiro, M.; Shatalov, P.B.; Shaw, K.; Sherman, D.; Sherwood, P.; Shibata, A.; Shimojima, M.; Shin, T.; Shmeleva, A.; Shochet, M.J.; Shupe, M.A.; Sicho, P.; Sidoti, A.; Siegert, F.; Siegrist, J.; Sijacki, Dj.; Silbert, O.; Silva, J.; Silver, Y.; Silverstein, D.; Silverstein, S.B.; Simak, V.; Simic, Lj.; Simion, S.; Simmons, B.; Simonyan, M.; Sinervo, P.; Sinev, N.B.; Sipica, V.; Siragusa, G.; Sisakyan, A.N.; Sivoklokov, S.Yu.; Sjoelin, J.; Sjursen, T.B.; Skovpen, K.; Skubic, P.; Slater, M.; Slavicek, T.; Sliwa, K.; Sloper, J.; Sluka, T.; Smakhtin, V.; Smirnov, S.Yu.; Smirnov, Y.; Smirnova, L.N.; Smirnova, O.; Smith, B.C.; Smith, D.; Smith, K.M.; Smizanska, M.; Smolek, K.; Snesarev, A.A.; Snow, S.W.; Snow, J.; Snuverink, J.; Snyder, S.; Soares, M.; Sobie, R.; Sodomka, J.; Soffer, A.; Solans, C.A.; Solar, M.; Solc, J.; Solfaroli Camillocci, E.; Solodkov, A.A.; Solovyanov, O.V.; Soluk, R.; Sondericker, J.; Sopko, V.; Sopko, B.; Sosebee, M.; Soukharev, A.; Spagnolo, S.; Spano, F.; Spencer, E.; Spighi, R.; Spigo, G.; Spila, F.; Spiwoks, R.; Spousta, M.; Spreitzer, T.; Spurlock, B.; Denis, R.D.St.; Stahl, T.; Stahlman, J.; Stamen, R.; Stancu, S.N.; Stanecka, E.; Stanek, R.W.; Stanescu, C.; Stapnes, S.; Starchenko, E.A.; Stark, J.; Staroba, P.; Starovoitov, P.; Stastny, J.; Stavina, P.; Steele, G.; Steinbach, P.; Steinberg, P.; Stekl, I.; Stelzer, B.; Stelzer, H.J.; Stelzer-Chilton, O.; Stenzel, H.; Stevenson, K.; Stewart, G.; Stockton, M.C.; Stoerig, K.; Stoicea, G.; Stonjek, S.; Strachota, P.; Stradling, A.R.; Straessner, A.; Strandberg, J.; Strandberg, S.; Strandlie, A.; Strauss, M.; Strizenec, P.; Strohmer, R.; Strom, D.M.; Stroynowski, R.; Strube, J.; Stugu, B.; Sturm, P.; Soh, D.A.; Su, D.; Sugaya, Y.; Sugimoto, T.; Suhr, C.; Suk, M.; Sulin, V.V.; Sultansoy, S.; Sumida, T.; Sun, X.H.; Sundermann, J.E.; Suruliz, K.; Sushkov, S.; Susinno, G.; Sutton, M.R.; Suzuki, T.; Suzuki, Y.; Sykora, I.; Sykora, T.; Szymocha, T.; Sanchez, J.; Ta, D.; Tackmann, K.; Taffard, A.; Tafirout, R.; Taga, A.; Takahashi, Y.; Takai, H.; Takashima, R.; Takeda, H.; Takeshita, T.; Talby, M.; Talyshev, A.; Tamsett, M.C.; Tanaka, J.; Tanaka, R.; Tanaka, S.; Tanaka, S.; Tapprogge, S.; Tardif, D.; Tarem, S.; Tarrade, F.; Tartarelli, G.F.; Tas, P.; Tasevsky, M.; Tassi, E.; Tatarkhanov, M.; Taylor, C.; Taylor, F.E.; Taylor, G.N.; Taylor, R.P.; Taylor, W.; Teixeira-Dias, P.; Ten Kate, H.; Teng, P.K.; Tennenbaum-Katan, Y.D.; Terada, S.; Terashi, K.; Terron, J.; Terwort, M.; Testa, M.; Teuscher, R.J.; Therhaag, J.; Thioye, M.; Thoma, S.; Thomas, J.P.; Thompson, E.N.; Thompson, P.D.; Thompson, P.D.; Thompson, R.J.; Thompson, A.S.; Thomson, E.; Thun, R.P.; Tic, T.; Tikhomirov, V.O.; Tikhonov, Y.A.; Tipton, P.; Tique Aires, F.J.Viegas; Tisserant, S.; Toczek, B.; Todorov, T.; Todorova-Nova, S.; Toggerson, B.; Tojo, J.; Tokar, S.; Tokushuku, K.; Tollefson, K.; Tomasek, L.; Tomasek, M.; Tomoto, M.; Tompkins, L.; Toms, K.; Tonoyan, A.; Topfel, C.; Topilin, N.D.; Torchiani, I.; Torrence, E.; Pastor, E.Torro; Toth, J.; Touchard, F.; Tovey, D.R.; Trefzger, T.; Tremblet, L.; Tricoli, A.; Trigger, I.M.; Trincaz-Duvoid, S.; Trinh, T.N.; Tripiana, M.F.; Triplett, N.; Trischuk, W.; Trivedi, A.; Trocme, B.; Troncon, C.; Trzupek, A.; Tsarouchas, C.; Tseng, J.C-L.; Tsiakiris, M.; Tsiareshka, P.V.; Tsionou, D.; Tsipolitis, G.; Tsiskaridze, V.; Tskhadadze, E.G.; Tsukerman, I.I.; Tsulaia, V.; Tsung, J.W.; Tsuno, S.; Tsybychev, D.; Tuggle, J.M.; Turecek, D.; Turk Cakir, I.; Turlay, E.; Tuts, P.M.; Twomey, M.S.; Tylmad, M.; Tyndel, M.; Uchida, K.; Ueda, I.; Ueno, R.; Ugland, M.; Uhlenbrock, M.; Uhrmacher, M.; Ukegawa, F.; Unal, G.; Undrus, A.; Unel, G.; Unno, Y.; Urbaniec, D.; Urkovsky, E.; Urquijo, P.; Urrejola, P.; Usai, G.; Uslenghi, M.; Vacavant, L.; Vacek, V.; Vachon, B.; Vahsen, S.; Valente, P.; Valentinetti, S.; Valkar, S.; Valladolid Gallego, E.; Vallecorsa, S.; Valls Ferrer, J.A.; Van Berg, R.; van der Graaf, H.; van der Kraaij, E.; van der Poel, E.; van der Ster, D.; van Eldik, N.; van Gemmeren, P.; van Kesteren, Z.; van Vulpen, I.; Vandelli, W.; Vaniachine, A.; Vankov, P.; Vannucci, F.; Vari, R.; Varnes, E.W.; Varouchas, D.; Vartapetian, A.; Varvell, K.E.; Vasilyeva, L.; Vassilakopoulos, V.I.; Vazeille, F.; Vellidis, C.; Veloso, F.; Veneziano, S.; Ventura, A.; Ventura, D.; Venturi, M.; Venturi, N.; Vercesi, V.; Verducci, M.; Verkerke, W.; Vermeulen, J.C.; Vetterli, M.C.; Vichou, I.; Vickey, T.; Viehhauser, G.H.A.; Villa, M.; Villani, E.G.; Villaplana Perez, M.; Vilucchi, E.; Vincter, M.G.; Vinek, E.; Vinogradov, V.B.; Viret, S.; Virzi, J.; Vitale, A.; Vitells, O.; Vivarelli, I.; Vives Vaque, F.; Vlachos, S.; Vlasak, M.; Vlasov, N.; Vogel, A.; Vokac, P.; Volpi, M.; von der Schmitt, H.; von Loeben, J.; von Radziewski, H.; von Toerne, E.; Vorobel, V.; Vorwerk, V.; Vos, M.; Voss, R.; Voss, T.T.; Vossebeld, J.H.; Vranjes, N.; Vranjes Milosavljevic, M.; Vrba, V.; Vreeswijk, M.; Vu Anh, T.; Vudragovic, D.; Vuillermet, R.; Vukotic, I.; Wagner, P.; Walbersloh, J.; Walder, J.; Walker, R.; Walkowiak, W.; Wall, R.; Wang, C.; Wang, H.; Wang, J.; Wang, S.M.; Warburton, A.; Ward, C.P.; Warsinsky, M.; Wastie, R.; Watkins, P.M.; Watson, A.T.; Watson, M.F.; Watts, G.; Watts, S.; Waugh, A.T.; Waugh, B.M.; Weber, M.D.; Weber, M.; Weber, M.S.; Weber, P.; Weidberg, A.R.; Weingarten, J.; Weiser, C.; Wellenstein, H.; Wells, P.S.; Wen, M.; Wenaus, T.; Wendler, S.; Wengler, T.; Wenig, S.; Wermes, N.; Werner, M.; Werner, P.; Werth, M.; Werthenbach, U.; Wessels, M.; Whalen, K.; White, A.; White, M.J.; White, S.; Whitehead, S.R.; Whiteson, D.; Whittington, D.; Wicek, F.; Wicke, D.; Wickens, F.J.; Wiedenmann, W.; Wielers, M.; Wienemann, P.; Wiglesworth, C.; Wiik, L.A.M.; Wildauer, A.; Wildt, M.A.; Wilkens, H.G.; Williams, E.; Williams, H.H.; Willocq, S.; Wilson, J.A.; Wilson, M.G.; Wilson, A.; Wingerter-Seez, I.; Winklmeier, F.; Wittgen, M.; Wolter, M.W.; Wolters, H.; Wosiek, B.K.; Wotschack, J.; Woudstra, M.J.; Wraight, K.; Wright, C.; Wright, D.; Wrona, B.; Wu, S.L.; Wu, X.; Wulf, E.; Wynne, B.M.; Xaplanteris, L.; Xella, S.; Xie, S.; Xu, D.; Xu, N.; Yamada, M.; Yamamoto, A.; Yamamoto, K.; Yamamoto, S.; Yamamura, T.; Yamaoka, J.; Yamazaki, T.; Yamazaki, Y.; Yan, Z.; Yang, H.; Yang, U.K.; Yang, Z.; Yao, W-M.; Yao, Y.; Yasu, Y.; Ye, J.; Ye, S.; Yilmaz, M.; Yoosoofmiya, R.; Yorita, K.; Yoshida, R.; Young, C.; Youssef, S.P.; Yu, D.; Yu, J.; Yuan, L.; Yurkewicz, A.; Zaidan, R.; Zaitsev, A.M.; Zajacova, Z.; Zambrano, V.; Zanello, L.; Zaytsev, A.; Zeitnitz, C.; Zeller, M.; Zemla, A.; Zendler, C.; Zenin, O.; Zenis, T.; Zenonos, Z.; Zenz, S.; Zerwas, D.; della Porta, G.Zevi; Zhan, Z.; Zhang, H.; Zhang, J.; Zhang, Q.; Zhang, X.; Zhao, L.; Zhao, T.; Zhao, Z.; Zhemchugov, A.; Zhong, J.; Zhou, B.; Zhou, N.; Zhou, Y.; Zhu, C.G.; Zhu, H.; Zhu, Y.; Zhuang, X.; Zhuravlov, V.; Zimmermann, R.; Zimmermann, S.; Zimmermann, S.; Ziolkowski, M.; Zivkovic, L.; Zobernig, G.; Zoccoli, A.; zur Nedden, M.

    2010-01-01

    The ATLAS Inner Detector is a composite tracking system consisting of silicon pixels, silicon strips and straw tubes in a 2 T magnetic field. Its installation was completed in August 2008 and the detector took part in data- taking with single LHC beams and cosmic rays. The initial detector operation, hardware commissioning and in-situ calibrations are described. Tracking performance has been measured with 7.6 million cosmic-ray events, collected using a tracking trigger and reconstructed with modular pattern-recognition and fitting software. The intrinsic hit efficiency and tracking trigger efficiencies are close to 100%. Lorentz angle measurements for both electrons and holes, specific energy-loss calibration and transition radiation turn-on measurements have been performed. Different alignment techniques have been used to reconstruct the detector geometry. After the initial alignment, a transverse impact parameter resolution of 22.1+/-0.9 {\\mu}m and a relative momentum resolution {\\sigma}p/p = (4.83+/-0.16)...

  14. Division E Commission 10: Solar Activity

    Science.gov (United States)

    Schrijver, Carolus J.; Fletcher, Lyndsay; van Driel-Gesztelyi, Lidia; Asai, Ayumi; Cally, Paul S.; Charbonneau, Paul; Gibson, Sarah E.; Gomez, Daniel; Hasan, Siraj S.; Veronig, Astrid M.; Yan, Yihua

    2016-04-01

    After more than half a century of community support related to the science of ``solar activity'', IAU's Commission 10 was formally discontinued in 2015, to be succeeded by C.E2 with the same area of responsibility. On this occasion, we look back at the growth of the scientific disciplines involved around the world over almost a full century. Solar activity and fields of research looking into the related physics of the heliosphere continue to be vibrant and growing, with currently over 2,000 refereed publications appearing per year from over 4,000 unique authors, publishing in dozens of distinct journals and meeting in dozens of workshops and conferences each year. The size of the rapidly growing community and of the observational and computational data volumes, along with the multitude of connections into other branches of astrophysics, pose significant challenges; aspects of these challenges are beginning to be addressed through, among others, the development of new systems of literature reviews, machine-searchable archives for data and publications, and virtual observatories. As customary in these reports, we highlight some of the research topics that have seen particular interest over the most recent triennium, specifically active-region magnetic fields, coronal thermal structure, coronal seismology, flares and eruptions, and the variability of solar activity on long time scales. We close with a collection of developments, discoveries, and surprises that illustrate the range and dynamics of the discipline.

  15. Commissioning of a new helium pipeline

    Science.gov (United States)

    2000-01-01

    At the commissioning of a new high-pressure helium pipeline at Kennedy Space Center, participants cut the lines to helium-filled balloons. From left, they are Center Director Roy Bridges; Michael Butchko, president, SGS; Pierre Dufour, president and CEO, Air Liquide America Corporation; David Herst, director, Delta IV Launch Sites; Pamela Gillespie, executive administrator, office of Congressman Dave Weldon; and Col. Samuel Dick, representative of the 45th Space Wing. The nine-mile-long buried pipeline will service launch needs at the new Delta IV Complex 37 at Cape Canaveral Air Force Station. It will also serve as a backup helium resource for Shuttle launches. Nearly one launch's worth of helium will be available in the pipeline to support a Shuttle pad in an emergency. The line originates at the Helium Facility on KSC and terminates in a meter station at the perimeter of the Delta IV launch pad. Others at the ceremony were Jerry Jorgensen, pipeline project manager, Space Gateway Support (SGS), and Ramon Lugo, acting executive director, JPMO.

  16. HYTEST Phase I Facility Commissioning and Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Lee P. Shunn; Richard D. Boardman; Shane J. Cherry; Craig G. Rieger

    2009-09-01

    The purpose of this document is to report the first year accomplishments of two coordinated Laboratory Directed Research and Development (LDRD) projects that utilize a hybrid energy testing laboratory that couples various reactors to investigate system reactance behavior. This work is the first phase of a series of hybrid energy research and testing stations - referred to hereafter as HYTEST facilities – that are planned for construction and operation at the Idaho National Laboratory (INL). A HYTEST Phase I facility was set up and commissioned in Bay 9 of the Bonneville County Technology Center (BCTC). The purpose of this facility is to utilize the hydrogen and oxygen that is produced by the High Temperature Steam Electrolysis test reactors operating in Bay 9 to support the investigation of kinetic phenomena and transient response of integrated reactor components. This facility provides a convenient scale for conducting scoping tests of new reaction concepts, materials performance, new instruments, and real-time data collection and manipulation for advance process controls. An enclosed reactor module was assembled and connected to a new ventilation system equipped with a variable-speed exhaust blower to mitigate hazardous gas exposures, as well as contract with hot surfaces. The module was equipped with a hydrogen gas pump and receiver tank to supply high quality hydrogen to chemical reactors located in the hood.

  17. Commissioning of the CMS High Level Trigger

    CERN Document Server

    Agostino, Lorenzo; Beccati, Barbara; Behrens, Ulf; Berryhil, Jeffrey; Biery, Kurt; Bose, Tulika; Brett, Angela; Branson, James; Cano, Eric; Cheung, Harry; Ciganek, Marek; Cittolin, Sergio; Coarasa, Jose Antonio; Dahmes, Bryan; Deldicque, Christian; Dusinberre, Elizabeth; Erhan, Samim; Gigi, Dominique; Glege, Frank; Gomez-Reino, Robert; Gutleber, Johannes; Hatton, Derek; Laurens, Jean-Francois; Loizides, Constantin; Ma, Frank; Meijers, Frans; Meschi, Emilio; Meyer, Andreas; Mommsen, Remigius K; Moser, Roland; O'Dell, Vivian; Oh, Alexander; Orsini, Luciano; Patras, Vaios; Paus, Christoph; Petrucci, Andrea; Pieri, Marco; Racz, Attila; Sakulin, Hannes; Sani, Matteo; Schieferdeckerd, Philipp; Schwick, Christoph; Serrano Margaleff, Josep Francesc; Shpakov, Dennis; Simon, Sean; Sumorok, Konstanty; Sungho Yoon, Andre; Wittich, Peter; Zanetti, Marco

    2009-01-01

    The CMS experiment will collect data from the proton-proton collisions delivered by the Large Hadron Collider (LHC) at a centre-of-mass energy up to 14 TeV. The CMS trigger system is designed to cope with unprecedented luminosities and LHC bunch-crossing rates up to 40 MHz. The unique CMS trigger architecture only employs two trigger levels. The Level-1 trigger is implemented using custom electronics, while the High Level Trigger (HLT) is based on software algorithms running on a large cluster of commercial processors, the Event Filter Farm. We present the major functionalities of the CMS High Level Trigger system as of the starting of LHC beams operations in September 2008. The validation of the HLT system in the online environment with Monte Carlo simulated data and its commissioning during cosmic rays data taking campaigns are discussed in detail. We conclude with the description of the HLT operations with the first circulating LHC beams before the incident occurred the 19th September 2008.

  18. COMMISSIONING AND DETECTOR PERFORMANCE GROUPS (DPG)

    CERN Document Server

    Darin Acosta

    Since the last CMS week we have continued the regular mid week global runs and conducted the first CRUZET this year at the beginning of June. The fact that the tracker was not available yet due to the cooling plant refurbishing has limited the scope of these global runs. The focus has been on verifying the robustness of the various subsystem data acquisition chains under realistic LHC-like trigger conditions. In the last few weeks we have been able to take runs of many hours at a Level-1 trigger rate of 90 kHz with less than 10% deadtime. As usual a lot of issues have been found and dealt with, and the firmware of the various subsystems have all been upgraded/fixed. Worth reporting is the fact that now both endcaps are read-out completely (including the RPC on the negative side) and the local commissioning of the preshower detector has been steadily progressing, with the last firmware fixes in hand to be able to join the global run campaign. The Pixel system has been part of 3 global runs already and has pr...

  19. Proof-Carrying Survivability

    Science.gov (United States)

    2013-01-15

    pp.289-302 ( Impact factor : 2.09). 2. Julic, J. and Zuo, Y. (2012). “An RFID Survivability Impact Model in the Military Domain”, Proc. of 18 th...Availability, Reliability and Security, 40(4), pp. 406-418 ( Impact factor : 2.016). 10. Zuo, Y. (2010). “A Holistic Approach for Specification of Security... Impact factor : 1.596). 20. Zuo, Y., Pimple, M. and Lande, S. (2009). “A Framework for RFID Survivability Requirement Analysis and Specification”, Proc

  20. Bear bile: dilemma of traditional medicinal use and animal protection

    Science.gov (United States)

    Feng, Yibin; Siu, Kayu; Wang, Ning; Ng, Kwan-Ming; Tsao, Sai-Wah; Nagamatsu, Tadashi; Tong, Yao

    2009-01-01

    Bear bile has been used in Traditional Chinese Medicine (TCM) for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Technique". Bear farming is extremely inhumane and many bears died of illness such as chronic infections and liver cancer. Efforts are now given by non-governmental organizations, mass media and Chinese government to end bear farming ultimately. At the same time, systematic research has to be done to find an alternative for bear bile. In this review, we focused on the literature, laboratory and clinical results related to bear bile and its substitutes or alternative in English and Chinese databases. We examined the substitutes or alternative of bear bile from three aspects: pure compounds derived from bear bile, biles from other animals and herbs from TCM. We then discussed the strategy for stopping the trading of bear bile and issues of bear bile related to potential alternative candidates, existing problems in alternative research and work to be done in the future. PMID:19138420

  1. Powder metallurgy bearings for advanced rocket engines

    Science.gov (United States)

    Fleck, J. N.; Killman, B. J.; Munson, H.E.

    1985-01-01

    Traditional ingot metallurgy was pushed to the limit for many demanding applications including antifriction bearings. New systems require corrosion resistance, better fatigue resistance, and higher toughness. With conventional processing, increasing the alloying level to achieve corrosion resistance results in a decrease in other properties such as toughness. Advanced powder metallurgy affords a viable solution to this problem. During powder manufacture, the individual particle solidifies very rapidly; as a consequence, the primary carbides are very small and uniformly distributed. When properly consolidated, this uniform structure is preserved while generating a fully dense product. Element tests including rolling contact fatigue, hot hardness, wear, fracture toughness, and corrosion resistance are underway on eleven candidate P/M bearing alloys and results are compared with those for wrought 440C steel, the current SSME bearing material. Several materials which offer the promise of a significant improvement in performance were identified.

  2. Active Magnetic Bearings – Magnetic Forces

    DEFF Research Database (Denmark)

    Kjølhede, Klaus

    2006-01-01

    Parameter identification procedures and model validation are major steps towards intelligent machines supported by active magnetic bearings (AMB). The ability of measuring the electromagnetic bearing forces, or deriving them from measuring the magnetic flux, strongly contributes to the model...... of the work is the characterization of magnetic forces by using two experimental different experimental approaches. Such approaches are investigated and described in details. A special test rig is designed where the 4 poles - AMB is able to generate forces up to 1900 N. The high precision characterization...... of the magnetic forces are led by using different experimental tests: (I) by using hall sensors mounted directly on the poles (precise measurements of the magnetic flux) and by an auxiliary system, composed of strain gages and flexible beams attached to the rotor; (II) by measuring the input current and bearing...

  3. Demography of the Yellowstone grizzly bears

    Science.gov (United States)

    Pease, C.M.; Mattson, D.J.

    1999-01-01

    We undertook a demographic analysis of the Yellowstone grizzly bears (Ursus arctos) to identify critical environmental factors controlling grizzly bear vital rates, and thereby to help evaluate the effectiveness of past management and to identify future conservation issues. We concluded that, within the limits of uncertainty implied by the available data and our methods of data analysis, the size of the Yellowstone grizzly bear population changed little from 1975 to 1995. We found that grizzly bear mortality rates are about double in years when the whitebark pine crop fails than in mast years, and that the population probably declines when the crop fails and increases in mast years. Our model suggests that natural variation in whitebark pine crop size over the last two decades explains more of the perceived fluctuations in Yellowstone grizzly population size than do other variables. Our analysis used demographic data from 202 radio-telemetered bears followed between 1975 and 1992 and accounted for whitebark pine (Pinus albicaulis) crop failures during 1993-1995. We used a maximum likelihood method to estimate demographic parameters and used the Akaike Information Criteria to judge the significance of various independent variables. We identified no independent variables correlated with grizzly bear fecundity. In order of importance, we found that grizzly bear mortality rates are correlated with season, whitebark pine crop size (mast vs. nonmast year), sex, management-trapping status (never management-trapped vs. management-trapped once or more), and age. The mortality rate of bears that were management-trapped at least once was almost double that of bears that were never management-trapped, implying a source/sink (i.e., never management-trapped/management-trapped) structure. The rate at which bears move between the source and sink, estimated as the management-trapping rate (h), is critical to estimating the finite rate of increase, I>I?. We quantified h by

  4. Hydrolyzable polyureas bearing hindered urea bonds.

    Science.gov (United States)

    Ying, Hanze; Cheng, Jianjun

    2014-12-10

    Hydrolyzable polymers are widely used materials that have found numerous applications in biomedical, agricultural, plastic, and packaging industrials. They usually contain ester and other hydrolyzable bonds, such as anhydride, acetal, ketal, or imine, in their backbone structures. Here, we report the first design of hydrolyzable polyureas bearing dynamic hindered urea bonds (HUBs) that can reversibly dissociate to bulky amines and isocyanates, the latter of which can be further hydrolyzed by water, driving the equilibrium to facilitate the degradation of polyureas. Polyureas bearing 1-tert-butyl-1-ethylurea bonds that show high dynamicity (high bond dissociation rate), in the form of either linear polymers or cross-linked gels, can be completely degraded by water under mild conditions. Given the simplicity and low cost for the production of polyureas by simply mixing multifunctional bulky amines and isocyanates, the versatility of the structures, and the tunability of the degradation profiles of HUB-bearing polyureas, these materials are potentially of very broad applications.

  5. Drivers of hibernation in the brown bear.

    Science.gov (United States)

    Evans, A L; Singh, N J; Friebe, A; Arnemo, J M; Laske, T G; Fröbert, O; Swenson, J E; Blanc, S

    2016-01-01

    Hibernation has been a key area of research for several decades, essentially in small mammals in the laboratory, yet we know very little about what triggers or ends it in the wild. Do climatic factors, an internal biological clock, or physiological processes dominate? Using state-of-the-art tracking and monitoring technology on fourteen free-ranging brown bears over three winters, we recorded movement, heart rate (HR), heart rate variability (HRV), body temperature (Tb), physical activity, ambient temperature (TA), and snow depth to identify the drivers of the start and end of hibernation. We used behavioral change point analyses to estimate the start and end of hibernation and convergent cross mapping to identify the causal interactions between the ecological and physiological variables over time. To our knowledge, we have built the first chronology of both ecological and physiological events from before the start to the end of hibernation in the field. Activity, HR, and Tb started to drop slowly several weeks before den entry. Bears entered the den when snow arrived and when ambient temperature reached 0 °C. HRV, taken as a proxy of sympathetic nervous system activity, dropped dramatically once the bear entered the den. This indirectly suggests that denning is tightly coupled to metabolic suppression. During arousal, the unexpected early rise in Tb (two months before den exit) was driven by TA, but was independent of HRV. The difference between Tb and TA decreased gradually suggesting that bears were not thermoconforming. HRV increased only three weeks before exit, indicating that late activation of the sympathetic nervous system likely finalized restoration of euthermic metabolism. Interestingly, it was not until TA reached the presumed lower critical temperature, likely indicating that the bears were seeking thermoneutrality, that they exited the den. We conclude that brown bear hibernation was initiated primarily by environmental cues, but terminated by

  6. Grizzly bear habitat selection is scale dependent.

    Science.gov (United States)

    Ciarniello, Lana M; Boyce, Mark S; Seip, Dale R; Heard, Douglas C

    2007-07-01

    The purpose of our study is to show how ecologists' interpretation of habitat selection by grizzly bears (Ursus arctos) is altered by the scale of observation and also how management questions would be best addressed using predetermined scales of analysis. Using resource selection functions (RSF) we examined how variation in the spatial extent of availability affected our interpretation of habitat selection by grizzly bears inhabiting mountain and plateau landscapes. We estimated separate models for females and males using three spatial extents: within the study area, within the home range, and within predetermined movement buffers. We employed two methods for evaluating the effects of scale on our RSF designs. First, we chose a priori six candidate models, estimated at each scale, and ranked them using Akaike Information Criteria. Using this method, results changed among scales for males but not for females. For female bears, models that included the full suite of covariates predicted habitat use best at each scale. For male bears that resided in the mountains, models based on forest successional stages ranked highest at the study-wide and home range extents, whereas models containing covariates based on terrain features ranked highest at the buffer extent. For male bears on the plateau, each scale estimated a different highest-ranked model. Second, we examined differences among model coefficients across the three scales for one candidate model. We found that both the magnitude and direction of coefficients were dependent upon the scale examined; results varied between landscapes, scales, and sexes. Greenness, reflecting lush green vegetation, was a strong predictor of the presence of female bears in both landscapes and males that resided in the mountains. Male bears on the plateau were the only animals to select areas that exposed them to a high risk of mortality by humans. Our results show that grizzly bear habitat selection is scale dependent. Further, the

  7. Wear Analysis of Wind Turbine Gearbox Bearings

    Energy Technology Data Exchange (ETDEWEB)

    Blau, Peter Julian [ORNL; Walker, Larry R [ORNL; Xu, Hanbing [ORNL; Parten, Randy J [ORNL; Qu, Jun [ORNL; Geer, Tom [ORNL

    2010-04-01

    The objective of this effort was to investigate and characterize the nature of surface damage and wear to wind turbine gearbox bearings returned from service in the field. Bearings were supplied for examination by S. Butterfield and J. Johnson of the National Wind Technology Center (NREL), Boulder, Colorado. Studies consisted of visual examination, optical and electron microscopy, dimensional measurements of wear-induced macro-scale and micro-scale features, measurements of macro- and micro-scale hardness, 3D imaging of surface damage, studies of elemental distributions on fracture surfaces, and examinations of polished cross-sections of surfaces under various etched and non-etched conditions.

  8. Survivability via Control Objectives

    Energy Technology Data Exchange (ETDEWEB)

    CAMPBELL,PHILIP L.

    2000-08-11

    Control objectives open an additional front in the survivability battle. A given set of control objectives is valuable if it represents good practices, it is complete (it covers all the necessary areas), and it is auditable. CobiT and BS 7799 are two examples of control objective sets.

  9. Artists’ Survival Rate

    DEFF Research Database (Denmark)

    Bille, Trine; Jensen, Søren

    2017-01-01

    The literature of cultural economics generally finds that an artistic education has no significant impact on artists’ income and careers in the arts. In our research, we have readdressed this question by looking at the artists’ survival in the arts occupations. The results show that an artistic...... education has a significant impact on artists’ careers in the arts and we find important industry differences....

  10. Education for Survival

    Science.gov (United States)

    Aldrich, Richard

    2010-01-01

    This article provides a brief overview of current approaches to education and concludes that none of these is sufficient to meet the challenges that now face the human race. It argues instead for a new concept of education for survival. (Contains 1 note.)

  11. Flexible survival regression modelling

    DEFF Research Database (Denmark)

    Cortese, Giuliana; Scheike, Thomas H; Martinussen, Torben

    2009-01-01

    Regression analysis of survival data, and more generally event history data, is typically based on Cox's regression model. We here review some recent methodology, focusing on the limitations of Cox's regression model. The key limitation is that the model is not well suited to represent time-varyi...

  12. Seeds to survive

    NARCIS (Netherlands)

    Groot, S.P.C.

    2002-01-01

    Seeds are important for man, either as propagation material of crops or directly for the production of foods, fodder and drinks. The natural function of seeds is dispersal of its genes to successive generations. Survival mechanisms seed have evolved sometimes interfere with those preferred by

  13. Survival After Retirement.

    Science.gov (United States)

    Holloway, Clark; Youngblood, Stuart A.

    1986-01-01

    Examined survival rates after retirement in a large corporation. A regression analysis was performed to control for age, sex, job status, and type of work differences that may influence longevity. Short-term suvivors seemed to undergo a different adjustment process than long-term survivors. (Author/ABL)

  14. Nurses' experiences of clinical commissioning group boards.

    Science.gov (United States)

    Allan, Helen; O'Driscoll, Mike; Savage, Jan; Lee, Gay; Dixon, Roz

    2016-06-15

    Aim To explore the experience of governing body nurses appointed to clinical commissioning group (CCG) boards; how they perform their responsibilities; and their perceived effectiveness in ensuring safe, patient-centred care and the factors that influence their effectiveness. Method This was a small pilot study using a mixed methods approach. There were four phases of the study: literature review, qualitative data collection (interviews), quantitative data collection (survey), and final data analysis. Findings In the early stages of the formation of CCGs, few governing body nurses had relevant experience to meet the needs of a strategic role, and many of these nurses had no proper job description, too little time to carry out their responsibilities, little management support, and unequal access to training, development, formal support or supervision compared to GP colleagues. Two working patterns or models of work of governing body nurses emerged: the full-time integrated executive statutory role and the part-time non-executive statutory role. Quality and quality assurance were the most frequently cited roles or responsibilities of governing body nurses in CCGs, and their highest priority was to improve the population's health. Conclusion The role of governing body nurse has emerged at a time of organisational change, and following extensive criticism of nursing and nurses in the media. Nurses' roles and experiences are affected by these contextual events and by the emerging structures and diversity of CCGs. Further research is required into the leadership role of governing body nurses, succession planning, and the effectiveness of their relationships with other senior nurses.

  15. The ALMA computing project: initial commissioning

    Science.gov (United States)

    Glendenning, B. E.; Raffi, G.

    2008-08-01

    The Atacama Large Millimeter/Submillimeter Array (ALMA) is a large radio interferometric telescope consisting of 66 antennas with variable positions, to be located at the Chajnantor 5000mat a high site (5000m) in Chile. ALMA commissioning has now started with the arrival of several antennas in Chile and will continue for the next 4 years. The ALMA Software was from the beginning has been developed as an end-to-end system including: proposal preparation, dynamic scheduling, instrument control, data handling and formatting, data archiving and retrieval, automatic and manual data processing systems, and support for observatory operations. This presentation will expand mostly on ALMA software aspects issues on which we are concentrating in this phase: management, procedures, testing and validation. While software development was based on a common software infrastructure (ALMA Common Software - ACS) from the beginning, end-to-end testing was limited by the hardware available, and was possible for years until recently only on computer models. Although the control software was available early in prototype stand-alone form to support testing of prototypes antennas, it was only recently that dynamic interferometry was reached and software could be tested end to end with a somewhat stable hardware platform. The lessons learned so far will be explained, in particular the need for a realistic validation environment, the balance to be achieved between incremental development and the needed for stability and usability, and the way to achieve all the above with a development team distributed over three four continents. Some general lessons can be drown drawn on the potential conflicts between software and system (hardware) testing, or in other words on the danger in taking short-cuts in software testing and validation.

  16. Beam commissioning for a superconducting proton linac

    Directory of Open Access Journals (Sweden)

    Zhi-Jun Wang

    2016-12-01

    Full Text Available To develop the next generation of safe and cleaner nuclear energy, the accelerator-driven subcritical (ADS system emerges as one of the most attractive technologies. It will be able to transmute the long-lived transuranic radionuclides produced in the reactors of today’s nuclear power plants into shorter-lived ones, and also it will provide positive energy output at the same time. The prototype of the Chinese ADS (C-ADS proton accelerator comprises two injectors and a 1.5 GeV, 10 mA continuous wave (CW superconducting main linac. The injector scheme II at the C-ADS demo facility inside the Institute of Modern Physics is a 10 MeV CW superconducting linac with a designed beam current of 10 mA, which includes an ECR ion source, a low-energy beam transport line, a 162.5 MHz radio frequency quadrupole accelerator, a medium-energy beam transport line, and a superconducting half wave resonator accelerator section. This demo facility has been successfully operating with an 11 mA, 2.7 MeV CW beam and a 3.9 mA, 4.3 MeV CW beam at different times and conditions since June 2014. The beam power has reached 28 kW, which is the highest record for the same type of linear accelerators. In this paper, the parameters of the test injector II and the progress of the beam commissioning are reported.

  17. Polar bear population status in the northern Beaufort Sea, Canada, 1971-2006.

    Science.gov (United States)

    Stirling, Ian; McDonald, Trent L; Richardson, E S; Regehr, Eric V; Amstrup, Steven C

    2011-04-01

    Polar bears (Ursus maritimus) of the northern Beaufort Sea (NB) population occur on the perimeter of the polar basin adjacent to the northwestern islands of the Canadian Arctic Archipelago. Sea ice converges on the islands through most of the year. We used open-population capture-recapture models to estimate population size and vital rates of polar bears between 1971 and 2006 to: (1) assess relationships between survival, sex and age, and time period; (2) evaluate the long-term importance of sea ice quality and availability in relation to climate warming; and (3) note future management and conservation concerns. The highest-ranking models suggested that survival of polar bears varied by age class and with changes in the sea ice habitat. Model-averaged estimates of survival (which include harvest mortality) for senescent adults ranged from 0.37 to 0.62, from 0.22 to 0.68 for cubs of the year (COY) and yearlings, and from 0.77 to 0.92 for 2-4 year-olds and adults. Horvtiz-Thompson (HT) estimates of population size were not significantly different among the decades of our study. The population size estimated for the 2000s was 980 +/- 155 (mean and 95% CI). These estimates apply primarily to that segment of the NB population residing west and south of Banks Island. The NB polar bear population appears to have been stable or possibly increasing slightly during the period of our study. This suggests that ice conditions have remained suitable and similar for feeding in summer and fall during most years and that the traditional and legal Inuvialuit harvest has not exceeded sustainable levels. However, the amount of ice remaining in the study area at the end of summer, and the proportion that continues to lie over the biologically productive continental shelf (polar bear population in the northern Beaufort Sea will eventually decline. Management and conservation practices for polar bears in relation to both aboriginal harvesting and offshore industrial activity will need to

  18. Polar bear population status in the northern Beaufort Sea, Canada, 1971-2006

    Science.gov (United States)

    Stirling, I.; McDonald, T.L.; Richardson, E.S.; Regehr, E.V.; Amstrup, Steven C.

    2011-01-01

    Polar bears (Ursus maritimus) of the northern Beaufort Sea (NB) population occur on the perimeter of the polar basin adjacent to the northwestern islands of the Canadian Arctic Archipelago. Sea ice converges on the islands through most of the year. We used open-population capture–recapture models to estimate population size and vital rates of polar bears between 1971 and 2006 to: (1) assess relationships between survival, sex and age, and time period; (2) evaluate the long-term importance of sea ice quality and availability in relation to climate warming; and (3) note future management and conservation concerns. The highest-ranking models suggested that survival of polar bears varied by age class and with changes in the sea ice habitat. Model-averaged estimates of survival (which include harvest mortality) for senescent adults ranged from 0.37 to 0.62, from 0.22 to 0.68 for cubs of the year (COY) and yearlings, and from 0.77 to 0.92 for 2–4 year-olds and adults. Horvtiz-Thompson (HT) estimates of population size were not significantly different among the decades of our study. The population size estimated for the 2000s was 980 ± 155 (mean and 95% CI). These estimates apply primarily to that segment of the NB population residing west and south of Banks Island. The NB polar bear population appears to have been stable or possibly increasing slightly during the period of our study. This suggests that ice conditions have remained suitable and similar for feeding in summer and fall during most years and that the traditional and legal Inuvialuit harvest has not exceeded sustainable levels. However, the amount of ice remaining in the study area at the end of summer, and the proportion that continues to lie over the biologically productive continental shelf (climate continues to warm as predicted, we predict that the polar bear population in the northern Beaufort Sea will eventually decline. Management and conservation practices for polar bears in relation to both

  19. 11 CFR 9036.4 - Commission review of submissions.

    Science.gov (United States)

    2010-01-01

    ...), the Commission will notify the candidate in writing of the following: (1) The amount of the difference... statement that the candidate may supply the Commission with additional documentation or other information in... committee(s) has knowledge that a contribution submitted for matching does not qualify under 11 CFR 9034.2...

  20. 29 CFR 901.3 - Participation by Commission.

    Science.gov (United States)

    2010-07-01

    ... Regulations Relating to Labor (Continued) CONSTRUCTION INDUSTRY COLLECTIVE BARGAINING COMMISSION POLICY STATEMENT ON COLLECTIVE BARGAINING DISPUTES AND APPLICABLE PROCEDURES § 901.3 Participation by Commission... criteria: (1) The disputes will have a significant impact on construction activity in the area involved. (2...

  1. US Nuclear Regulatory Commission organization charts and functional statements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This document is the US NRC organizational structure and chart as of July 1, 1996. It contains the org charts for the Commission, ACRS, ASLAB, Commission staff offices, Executive Director for Operations, Office of the Inspector General, Program offices, and regional offices.

  2. News from the Biological Stain Commission no. 12

    DEFF Research Database (Denmark)

    Lyon, H O

    2012-01-01

    In this 12(th) issue of News from the Biological Stain Commission (BSC) under the heading of Regulatory affairs, the Biological Stain Commission's International Affairs Committee presents information from the meetings of ISO/TC 212/WG 1 Quality and competence in the medical laboratory and ISO...

  3. The empire strikes back: CISAC beats Commission in General Court

    NARCIS (Netherlands)

    Quintais, J.P.

    2013-01-01

    he General Court's judgments in Case T-442/08 and related cases annulled Article 3 of the Commission's 2008 decision against CISAC and 20 collecting societies, on the basis of the Commission's failure to prove the required evidentiary legal standard for the existence of a concerted practice on

  4. 29 CFR 2203.3 - Public attendance at Commission meetings.

    Science.gov (United States)

    2010-07-01

    ... procedures, or (vi) Endanger the life or physical safety of law enforcement personnel; (8) Disclose... Commission's issuance of a subpoena or the Commission's participation in a civil action or proceeding, an action in a foreign court or international tribunal, or an arbitration, or the initiation, conduct...

  5. 7 CFR 17.6 - Discounts, fees, commissions and payments.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Discounts, fees, commissions and payments. 17.6... Discounts, fees, commissions and payments. For purposes of this section, the term “payment” means a...) Discounts. If a contract provides for one or more discounts (including but not limited to trade or quantity...

  6. 18 CFR 152.4 - Certificate from State Commission.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Certificate from State Commission. 152.4 Section 152.4 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT APPLICATION FOR EXEMPTION FROM THE...

  7. 10 CFR 51.124 - Commission duty to comment.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Commission duty to comment. 51.124 Section 51.124 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND... environmental impact statements prepared by other Federal agencies, consistent with the provisions of 40 CFR...

  8. Montgomery County Commission for Women, 1976 Annual Report.

    Science.gov (United States)

    Montgomery County Commission for Women, Rockville, MD.

    This annual report cites activities of the Montgomery County Commission for Women during 1976 which aimed at decreasing sex discrimination practices and serving women's social needs. The document is presented in six sections. Section I presents an overview of the counseling and information services provided by the Commission in areas such as…

  9. Knight Commission to Fight High Salaries and Recruiting Pressures

    Science.gov (United States)

    Wolverton, Brad; Lipka, Sara

    2007-01-01

    Last week, commissioners of the Knight Foundation Commission on Intercollegiate Athletics organized a meeting to tackle recruiting problems and gender inequalities in college sports, but another topic--the high pay of football and men's basketball coaches--came up repeatedly. This article reports on what the commission intends to do in order to…

  10. 77 FR 58941 - Appeal Proceedings Before the Commission

    Science.gov (United States)

    2012-09-25

    ..., with the Commission taking into consideration the time-consuming, internal decision processes that... an outcome invites due process challenges. One of the commenters was disappointed by the decision to... Commission to begin their decision-making process. Response: Regarding the timing of the closing of the...

  11. 5 CFR 550.714 - Panama Canal Commission employees.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Panama Canal Commission employees. 550... PAY ADMINISTRATION (GENERAL) Severance Pay § 550.714 Panama Canal Commission employees. (a) Notwithstanding any other provisions of this subpart, an employee separated from employment with the Panama Canal...

  12. 47 CFR 1.14 - Citation of Commission documents.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Citation of Commission documents. 1.14 Section... Rules of Practice and Procedure General § 1.14 Citation of Commission documents. The appropriate reference to the FCC Record shall be included as part of the citation to any document that has been printed...

  13. Commentary: Legacy of the Commission on Research Integrity.

    Science.gov (United States)

    Redman, Barbara K

    2017-04-01

    20 years ago, the Report of the Commission on Research Integrity (also known as the Ryan Commission after its chair) was submitted to the Secretary of the Department of Health and Human Services and to House and Senate Committees. As directed in enabling legislation, the Commission had provided recommendations on a new definition of research misconduct, oversight of scientific practices, and development of a regulation to protect whistleblowers. Reflecting the ethos of the time, the Commission recommended that institutions receiving Public Health Service research funding should provide oversight of all but the most egregious misconduct. The suggested definition of research misconduct was organized around misappropriation, interference and misrepresentation, which would have addressed collaborative/authorship disputes and sabotage in scientific laboratories, both of which remain unaddressed in current policy. The Commission also recommended the Whistleblower Bill of Rights and Responsibilities which would have authorized remedies for whistleblowers who experienced retaliation and sanctions against retaliators. Response from the scientific community was highly critical, and none of the Commission's recommendations was accepted. No new body has examined issues within the Commission's charge, there has been no significant Congressional or public pressure to do so, institutions have not been able to sustain standards that would have avoided current concerns about bias and irreproducibility in research, and there is still no entity in science capable of addressing issues assigned to the Commission and other urgent issues.

  14. Commissioning of the LEIR electron cooler with Pb$^{+54}$ ions

    CERN Document Server

    Tranquille, G; Carly, Ch; Prieto, V; Sautier, R; Bubley, A; Parkhomchuk, V; Reva, V; Brizgunov, M; Vedenev, M; Panasyuk, V

    2006-01-01

    The new LEIR cooler with a variable profile of the electron beam and electrostatic bending was commissioned in 2005-2006. In this paper we present our experience with the commissioning of the new device as well as the first results of the ion beam Pb +54 cooling with a high-intensity variable-density electron beam.

  15. 28 CFR 2.42 - Probation officer's reports to Commission.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Probation officer's reports to Commission. 2.42 Section 2.42 Judicial Administration DEPARTMENT OF JUSTICE PAROLE, RELEASE, SUPERVISION AND... § 2.42 Probation officer's reports to Commission. A supervision report shall be submitted by the...

  16. History: The Catholic Commission for Justice and Peace and the ...

    African Journals Online (AJOL)

    It advances the proposition that the Church, through the Catholic Commission for Justice and Peace, played an important role in the internationalization of the Rhodesian crisis between 1972 and 1980. It argues first, that the Catholic Commission for Justice and Peace performed a sterling job of breaking the enormous ...

  17. 78 FR 12933 - Proceedings Before the Commodity Futures Trading Commission

    Science.gov (United States)

    2013-02-26

    ... Relating to Review of National Futures Association (``NFA'') Decisions in Disciplinary, Membership Denial... proceedings, and in the appellate review of NFA decisions. Also, the Commission has designed the amendments to... Commission review of final exchange and NFA decisions, and initial decisions in reparation and administrative...

  18. Arizona Commission of Indian Affairs 1979-1980 Annual Report.

    Science.gov (United States)

    Arizona Commission of Indian Affairs, Phoenix.

    Designed to provide insight into the proceedings, transactions, and findings of the Arizona Commission of Indian Affairs, this 1979-80 annual report reflects the Commission's efforts to act in a liaison capacity between tribes and state government and to provide tribes with technical assistance. The report describes 17 projects completed during…

  19. Arizona Commission of Indian Affairs 1982 Annual Report.

    Science.gov (United States)

    Arizona Commission of Indian Affairs, Phoenix.

    Designed to provide insight into the proceedings, transactions, and findings of the Arizona Commission of Indian Affairs, this 1981-82 annual report reflects the Commission's efforts to improve communications, understanding and working relationships between tribes and state government to provide tribes with technical assistance. The report…

  20. Arizona Commission of Indian Affairs 1981 Annual Report.

    Science.gov (United States)

    Arizona Commission of Indian Affairs, Phoenix.

    Designed to provide insight into the proceedings, transactions, and findings of the Arizona Commission of Indian Affairs, this 1980-81 annual report reflects the commission's efforts to act in a liaison capacity between tribes and state government to provide tribes with technical assistance. The report describes 18 projects completed during the…