WorldWideScience

Sample records for surveyor fracture zone

  1. Subduction of fracture zones

    Science.gov (United States)

    Constantin Manea, Vlad; Gerya, Taras; Manea, Marina; Zhu, Guizhi; Leeman, William

    2013-04-01

    Since Wilson proposed in 1965 the existence of a new class of faults on the ocean floor, namely transform faults, the geodynamic effects and importance of fracture zone subduction is still little studied. It is known that oceanic plates are characterized by numerous fracture zones, and some of them have the potential to transport into subduction zones large volumes of water-rich serpentinite, providing a fertile water source for magma generated in subduction-related arc volcanoes. In most previous geodynamic studies, subducting plates are considered to be homogeneous, and there is no clear indication how the subduction of a fracture zone influences the melting pattern in the mantle wedge and the slab-derived fluids distribution in the subarc mantle. Here we show that subduction of serpentinized fracture zones plays a significant role in distribution of melt and fluids in the mantle wedge above the slab. Using high-resolution tree-dimensional coupled petrological-termomechanical simulations of subduction, we show that fluids, including melts and water, vary dramatically in the region where a serpentinized fracture zone enters into subduction. Our models show that substantial hydration and partial melting tend to concentrate where fracture zones are being subducted, creating favorable conditions for partially molten hydrous plumes to develop. These results are consistent with the along-arc variability in magma source compositions and processes in several regions, as the Aleutian Arc, the Cascades, the Southern Mexican Volcanic Arc, and the Andean Southern Volcanic Zone.

  2. Deep gold mine fracture zone behaviour

    CSIR Research Space (South Africa)

    Napier, JAL

    1998-12-01

    Full Text Available The investigation of the behaviour of the fracture zone surrounding deep level gold mine stopes is detailed in three main sections of this report. Section 2 outlines the ongoing study of fundamental fracture process and their numerical...

  3. Reassessment of the Bahamas Fracture Zone

    Energy Technology Data Exchange (ETDEWEB)

    Ball, M.M. (Geological Survey, Evergreen, CO (United States))

    1991-03-01

    The Bahamas Fracture Zone trends northwestward across south Florida and the Western Florida shelf, and it appears to connect with the Gilbertown-Pickens-Pollard portion of the circum-Gulf of Mexico fault system. Along the fracture zone's trend, seismic reflection data reveal normal displacement in the Late Jurassic section of a kilometer, on a down-to-the-west fault, 9 km east of the east end of Destin dome in the Apalachicola basin. This fault was active in Late Jurassic and Early Cretaceous time during the gulf spreading event. The Middle Jurassic Louann Salt thins abruptly to the east across this fault. Toward the southeast, where the fracture zone crosses the Florida peninsula, gravity data have previously been interpreted to indicate coincidence of the Bahamas Fracture Zone with a hinge zone attended by relief on the Mohorovicic discontinuity. This interpretation is an artifact resulting from the use of erroneously low densities for the sedimentary fill of the South Florida basin. The inclusion of a nonexistent negative component for the basin's sedimentary fill necessitated the inclusion of an equally nonexistent positive contribution from relief on the Moho in order to match the observed anomaly. Although northwestward-trending faults do cross south Florida and the Western Florida shelf, the role of the Bahamas Fracture Zone as a boundary between continental and transitional or oceanic crust is insupportable.

  4. COHESIVE ZONE FINITE ELEMENT-BASED MODELING OF HYDRAULIC FRACTURES

    Institute of Scientific and Technical Information of China (English)

    Zuorong Chen; A.P. Bunger; Xi Zhang; Robert G. Jeffrey

    2009-01-01

    Hydraulic fracturing is a powerful technology used to stimulate fluid production from reservoirs. The fully 3-D numerical simulation of the hydraulic fracturing process is of great importance to the efficient application of this technology, but is also a great challenge because of the strong nonlinear coupling between the viscous flow of fluid and fracture propagation. By taking advantage of a cohesive zone method to simulate the fracture process, a finite element model based on the existing pore pressure cohesive finite elements has been established to investigate the propagation of a penny-shaped hydraulic fracture in an infinite elastic medium. The effect of cohesive material parameters and fluid viscosity on the hydraulic fracture behaviour has been investigated. Excellent agreement between the finite element results and analytical solutions for the limiting case where the fracture process is dominated by rock fracture toughness demonstrates the ability of the cohesive zone finite element model in simulating the hydraulic fracture growth for this case.

  5. Relating Cohesive Zone Model to Linear Elastic Fracture Mechanics

    Science.gov (United States)

    Wang, John T.

    2010-01-01

    The conditions required for a cohesive zone model (CZM) to predict a failure load of a cracked structure similar to that obtained by a linear elastic fracture mechanics (LEFM) analysis are investigated in this paper. This study clarifies why many different phenomenological cohesive laws can produce similar fracture predictions. Analytical results for five cohesive zone models are obtained, using five different cohesive laws that have the same cohesive work rate (CWR-area under the traction-separation curve) but different maximum tractions. The effect of the maximum traction on the predicted cohesive zone length and the remote applied load at fracture is presented. Similar to the small scale yielding condition for an LEFM analysis to be valid. the cohesive zone length also needs to be much smaller than the crack length. This is a necessary condition for a CZM to obtain a fracture prediction equivalent to an LEFM result.

  6. Geoid anomalies over two South Atlantic fracture zones

    Science.gov (United States)

    Freedman, Adam P.; Parsons, Barry

    1990-01-01

    Seasat altimetry profiles across the Falkland-Agulhas and Ascension fracture zones were examined for evidence of step-like geoid offsets predicted from thermal modeling of the lithosphere. Neither the plate nor the half-space model of lithospheric thermal evolution succeeds in predicting the variations in step height with age across the fracture zone branches considered. For ages less than about 30 Ma, the step offsets decrease in a manner suggesting a plate with a thickness of 50-75 km. At greater ages, the offsets show complex behavior that may be due to bathymetric features adjacent to the fracture zones. Similar geoid patterns on opposite branches of the Falkland-Agulhas fracture zone are indicative of processes that act symmetrically on both sides of the Mid-Atlantic Ridge. This is consistent both with small-scale convection occurring beneath the lithosphere and with bathymetric features originally produced along the ridge crest and now located symmetrically on opposite sides of the ridge. The west flank of the Ascension fracture zone displays a regrowth in step height at about 40 Ma consistent with small-scale convection and in agreement with other studies of Pacific and South Atlantic fracture zones.

  7. En echelon knolls in the Nosappu Fracture Zone, NW Pacific: A possible leaky transform fault zone

    Science.gov (United States)

    Ogawa, Y.; Hirano, N.; Shipboard Scientific Party Kr03-07, .

    2003-12-01

    During JAMSTEC R/V KAIREI cruise KR03-07, we mapped significant en echelon arrays of knolls and ridges on the NNW-trending Nosappu Fracture Zone between Hokkaido and Shatsky Rise, NW Pacific. This fracture zone has been known to be irregular, including a deep-sea channel, the Nakwe Channel, enigmatic for inside the wide oceanic plate. Considering the previously recognized magnetic lineament dislocation, the fracture zone has long (more than 150 km) left-lateral strike-slip component as a ridge-ridge transform fault zone between the Izanagi and Pacific plates during Early Cretaceous. Detail multi-narrowbeam mapping around 37 N latitude, 150 E longitude (covering 78 km x 137 km), indicated many small knolls and ridges that form en echelon arrangement. Some are boomerang, sock or E-letter in shape. The two dominant directions of ridges are recognized, one is parallel to the fracture zone and the other is in left-handed en echelon fashion. Besides these ridges, there are other types of ridges or conical knolls lower than 500 m in relief; one is a group of rather large knolls extending to NE, roughly perpendicular to the fracture zone direction, and the other is independent small knolls, summing up to five or six in number. Another expression of a depression zone was recognized with a moderate angle to the fracture zone in a crank fashion. This may correspond to the so-called _gNakwe Channel_h which has been wrongly mistaken. Such en echelon arrays are involved in a 50 km wide NNW-SSE zone, which is sharply demarcated by fault scarps. These characteristics in the fracture zone area and associated knolls suggest that this part of the Nosappu Fracture Zone might have developed in a fault interaction area which has a left-lateral component of leaky transform faulting close to the spreading ridge.

  8. A Fracture Mechanical Model and a Cohesive Zone Model of Interface Fracture

    DEFF Research Database (Denmark)

    Jensen, Henrik Myhre

    2006-01-01

    A comparison between the prediction of crack propagation through an adhesive interface based on a fracture mechanics approach and a cohesive zone approach is presented. Attention is focussed on predicting the shape of the crack front and the critical stress required to propagate the crack under...... quasi-static conditions. The cohesive zone model has several advantages over the fracture mechanics based model. It is easier to generalise the cohesive zone model to take into account effects such as plastic deformation in the adherends, and to take into account effects of large local curvatures...... of the interface crack front. The comparison shows a convergence of the results based on the cohesive zone model towards the results based on a fracture mechanics approach in the limit where the size of the cohesive zone becomes smaller than other relevant geometrical lengths for the problem....

  9. Appropriate electromagnetic techniques for imaging geothermal fracture zones

    Energy Technology Data Exchange (ETDEWEB)

    Groom, R.; Walker, P. [PetRos EiKon Incorporated, Ontario (Canada)

    1996-05-01

    Electromagnetic surface detection of fracture zones has often been approached by using the magnetotelluric method. This technique suffers greatly from the quantity and scale of the conductive inhomogeneities lying above the fracture zones. Additionally, it suffers from the inherent inability to focus the source on the target. There are no such source focusing capabilities in magnetotellurics. Accordingly, the quantity of magnetotelluric data required to resolve targets in such complex conditions can make the technique inefficient and insufficient from a cost perspective. When attempting to reveal a subsurface structure and image it, the basic physical responses at hand must be kept in mind, and the appropriate source must be utilized, which most effectively illuminates the target. A further advantage to controlled sources is that imaging techniques may be used to accentuate the response due to knowledge and control of the source.

  10. Geoid anomalies and fracture zones in the Pacific Ocean

    Science.gov (United States)

    1984-01-01

    The high degree and order geoid field in the Pacific is a superposition of fracture zone anomalies and hot-spot swell anomalies. A two-dimensional spectral analysis of this field reveals a very strong north-south wavenumber contribution with a dominant wavelength of about 2000 km, a much smaller contribution from east-west wavenumbers, and negligible contributions from other directions. One dimensional profiles were taken in order to appreciate the magnitudes of the north-south and east-west components. A calculated geoid anomaly using an idealized fracture zone model contains just about the same amount of power in the 2350 km band wavelength as does the north-south profile of the SEASAT geoid field. In an attempt to correlate plate age with geoid anomalies, a digitized age map of the Pacific was used to generate a synthetic geoid, which was subtracted from SEASAT. This procedure produces a residual geoid in which the fracture zone anomalies appear to be diminished, if not removed.

  11. Magnetic anomalies over fracture zones in the central North Atlantic Ocean

    NARCIS (Netherlands)

    Twigt, W.

    1980-01-01

    The offset of a fracture zone leads to a configuration in which a strip of oceanic crust of one age will be juxtaposed axially to a strip of another age. Consequently, the polarity of the magnetic layer may be different on either side of the fracture zone. Next to this magnetic contrast the fracture

  12. Magnetic anomalies over fracture zones in the central North Atlantic Ocean

    NARCIS (Netherlands)

    Twigt, W

    1980-01-01

    The offset of a fracture zone leads to a configuration in which a strip of oceanic crust of one age will be juxtaposed axially to a strip of another age. Consequently, the polarity of the magnetic layer may be different on either side of the fracture zone. Next to this magnetic contrast the fracture

  13. Static versus dynamic fracturing in shallow carbonate fault zones

    Science.gov (United States)

    Fondriest, Michele; Doan, Mai-Linh; Aben, Frans; Fusseis, Florian; Mitchell, Thomas M.; Voorn, Maarten; Secco, Michele; Di Toro, Giulio

    2017-03-01

    Moderate to large earthquakes often nucleate within and propagate through carbonates in the shallow crust. The occurrence of thick belts of low-strain fault-related breccias is relatively common within carbonate damage zones and was generally interpreted in relation to the quasi-static growth of faults. Here we report the occurrence of hundreds of meters thick belts of intensely fragmented dolostones along a major transpressive fault zone in the Italian Southern Alps. These fault rocks have been shattered in-situ with negligible shear strain accumulation. The conditions of in-situ shattering were investigated by deforming the host dolostones in uniaxial compression both under quasi-static (strain rate ∼10-5 s-1) and dynamic (strain rate > 50 s-1) loading. Dolostones deformed up to failure under low-strain rate were affected by single to multiple discrete extensional fractures sub-parallel to the loading direction. Dolostones deformed under high-strain rate were shattered above a strain rate threshold of ∼ 120 s-1 and peak stresses on average larger than the uniaxial compressive strength of the rock, whereas they were split in few fragments or remained macroscopically intact at lower strain rates. Fracture networks were investigated in three dimensions showing that low- and high-strain rate damage patterns (fracture intensity, aperture, orientation) were significantly different, with the latter being similar to that of natural in-situ shattered dolostones (i.e., comparable fragment size distributions). In-situ shattered dolostones were thus interpreted as the result of high energy dynamic fragmentation (dissipated strain energies >1.8 MJ/m3) similarly to pulverized rocks in crystalline lithologies. Given their seismic origin, the presence of in-situ shattered dolostones can be used in earthquake hazard studies as evidence of the propagation of seismic ruptures at shallow depths.

  14. The Global Fracture Zone and Magnetic Lineation Project

    Science.gov (United States)

    Wessel, P.; Müller, D.; Sandwell, D. T.; Cande, S. C.

    2009-12-01

    Plate kinematic models derive from the detailed identifications of conjugate magnetic isochron picks and fracture zones (FZ). These data form the foundation of relative marine plate tectonic reconstructions and codify our understanding of Earth’s surface evolution since the Mesozoic. Furthermore, FZ traces have extensive uses in other geophysical investigations such as studying the origins of transform fault offsets, identifying seamounts and isolating abyssal hill roughness within fracture zone provinces, examining predictions from competing thermal models of the lithosphere, and much more. Kinematic models also require temporal information and this dimension is provided by identification of key magnetic isochron boundaries from total field magnetic anomalies collected along ship tracks. The joint FZ and isochron pick data constitute the fundamental constraints on marine relative plate motion models. Much work has been performed in trying to determine globally consistent data sets of FZ and isochrons. Unfortunately, advances in data collection and processing tend to make specific “snap-shot” compilations obsolete, thus necessitating a new analysis following the addition of new data. A complete re-analysis can be a daunting task when a global reconstruction is one of the design goals. Effectively, such high barriers to undertaking exploratory research limit the progress that can be made in many fields of marine science and deprive us of serendipitous and curiosity-driven investigations which have proven so valuable throughout the history of plate tectonics. Here, we report progress of a pilot study to establish new infrastructure for users of FZ and magnetic isochron data. We are developing an open source, community-driven database where consistent and well-documented information on FZ and magnetic isochrons will be collected, accessible from a dedicated website. For fracture zones, we store mostly meta-data about each FZ and a few key locations along its

  15. Fractures in the deep critical zone characterized by drilling and geophysics in the Laramie Range, Wyoming

    Science.gov (United States)

    Hayes, J. L.; Holbrook, W. S.; Carr, B.; Flinchum, B. A.; Rempe, D.; Novitsky, C. G.; Dewey, J.

    2016-12-01

    Fractures are linked to many processes that influence the architecture of the deep critical zone; for example, fractures may regulate the influx of meteoric water and thus direct the propagation of chemical weathering. It is therefore important to understand the subsurface distribution of fractures and their control on deep critical zone architecture. Several proposed theoretical frameworks imply that the distribution of fractures in the deep critical zone may vary along hillslopes. Frost cracking models predict variations in cracking intensity depending on aspect and temperature variation. Surface curvature and inherited tectonic fractures may also provide controls on fracture distribution. A recently proposed model combines topographic and tectonic stresses to calculate the lateral distribution of subsurface stress and failure potential, thus implying local and regional controls on the distribution and density of fractures. In light of these models, we use geophysical surveys and observations from boreholes to characterize fractures in the deep critical zone in the Laramie Mountains, Wyoming. Our geophysical results from seismic refraction surveys suggest that local topographic and regional tectonic stresses control the distribution of fractures. This interpretation is supported by borehole measurements, which show that fracture density decreases with depth and is lower beneath valleys than ridges. We estimate fracture density from pixel analysis of amplitude and traveltime acoustic televiewer data, which accounts for fracture aperture. Comparisons of p-wave velocities and fracture density show that increasing seismic velocity (i.e., from 1-4 km/s) corresponds to decreasing fracture density. From optical televiewer images of the borehole we also interpret thick (> 10 cm) weathering zones along fractures in the upper portions of boreholes located on the ridge. This observation emphasizes the complex interplay of chemical and physical processes in shaping the deep

  16. Shock-induced wave propagation over porous and fractured borehole zones: Theory and experiments

    NARCIS (Netherlands)

    Fan, H.; Smeulders, D.M.J.

    2013-01-01

    Borehole waves are strongly affected by adjacent porous zones or by fractures intersecting the borehole. A theoretical description for both porous and fracture zones is possible based on the introduction of an effective borehole fluid bulk modulus, characterizing the wave attenuation via borehole wa

  17. Cohesive zone modelling of interface fracture near flaws in adhesive joints

    DEFF Research Database (Denmark)

    Hansen, Peter Feraren; Jensen, Henrik Myhre

    2004-01-01

    A cohesive zone model is suggested for modelling of interface fracture near flaws in adhesive joints. A shear-loaded adhesive joint bonded with a planar circular bond region is modelled using both the cohesive zone model and a fracture mechanical model. Results from the models show good agreement...... of crack propagation on the location and shape of the crack front and on the initial joint strength. Subsequently, the cohesive zone model is used to model interface fracture through a planar adhesive layer containing a periodic array of elliptical flaws. The effects of flaw shape are investigated, as well...... on the fracture process zone width relative to the flaw dimensions. It is also seen that with increasing fracture process zone width, the strength variation with the flaw shape decreases, however, the strength is effected over a wider range of propagation, (C) 2004 Elsevier Ltd. All rights reserved....

  18. Discovery Mondays: Surveyors' Tools

    CERN Multimedia

    2003-01-01

    Surveyors of all ages, have your rulers and compasses at the ready! This sixth edition of Discovery Monday is your chance to learn about the surveyor's tools - the state of the art in measuring instruments - and see for yourself how they work. With their usual daunting precision, the members of CERN's Surveying Group have prepared some demonstrations and exercises for you to try. Find out the techniques for ensuring accelerator alignment and learn about high-tech metrology systems such as deviation indicators, tracking lasers and total stations. The surveyors will show you how they precisely measure magnet positioning, with accuracy of a few thousandths of a millimetre. You can try your hand at precision measurement using different types of sensor and a modern-day version of the Romans' bubble level, accurate to within a thousandth of a millimetre. You will learn that photogrammetry techniques can transform even a simple digital camera into a remarkable measuring instrument. Finally, you will have a chance t...

  19. Stresses and Shear Fracture Zone of Jinshazhou Tunnel Surrounding Rock in Rich Water Region

    Institute of Scientific and Technical Information of China (English)

    ZHENG Jun-jie; LOU Xiao-ming

    2008-01-01

    Field evidence has shown that large-scale and unstable discontinuous planes in the rock mass surrounding tunnels in rich water region are probably generated after excavation. The tunnel surrounding rock was divided into three zones, including elastic zone, plastic damage zone and shear fracture zone fof assessing the stability of the tunnel surrounding rock. By local hydrogeology, the stresses of surrounding rock of Jinshazhou circular tunnel was analyzed and the stress solutions on the elastic and plastic damage zones were obtained by applying the theories of fluid-solid coupling and elasto-plastic damage mechanics. The shear fracture zone generated by joints was studied and its range was determined by using Mohr-Coulomb strength criterion. Finally, the correctness of the theoretical results was validated by comparing the scopes of shear fracture zones calculated in this paper with those from literature.

  20. Adaptive Fusion of Stochastic Information for Imaging Fractured Vadose Zones

    Science.gov (United States)

    Daniels, J.; Yeh, J.; Illman, W.; Harri, S.; Kruger, A.; Parashar, M.

    2004-12-01

    A stochastic information fusion methodology is developed to assimilate electrical resistivity tomography, high-frequency ground penetrating radar, mid-range-frequency radar, pneumatic/gas tracer tomography, and hydraulic/tracer tomography to image fractures, characterize hydrogeophysical properties, and monitor natural processes in the vadose zone. The information technology research will develop: 1) mechanisms and algorithms for fusion of large data volumes ; 2) parallel adaptive computational engines supporting parallel adaptive algorithms and multi-physics/multi-model computations; 3) adaptive runtime mechanisms for proactive and reactive runtime adaptation and optimization of geophysical and hydrological models of the subsurface; and 4) technologies and infrastructure for remote (pervasive) and collaborative access to computational capabilities for monitoring subsurface processes through interactive visualization tools. The combination of the stochastic fusion approach and information technology can lead to a new level of capability for both hydrologists and geophysicists enabling them to "see" into the earth at greater depths and resolutions than is possible today. Furthermore, the new computing strategies will make high resolution and large-scale hydrological and geophysical modeling feasible for the private sector, scientists, and engineers who are unable to access supercomputers, i.e., an effective paradigm for technology transfer.

  1. Numerical modeling of fracture zone subduction and related volcanism in Southern Mexico

    Science.gov (United States)

    Constantin Manea, Vlad; Gerya, Taras; Manea, Marina

    2010-05-01

    Oceanic fracture zones are recognized as areas where parts of the oceanic lithosphere can be partially serpentinized. Therefore, when subducting, these fracture zones have the potential to carry significant amounts of fluids which are released at certain depths, depending on the slab dynamics. In the case of Southern Mexico, the Cocos plate hosts a large oceanic fracture zone named Tehuantepec FZ, currently subducting. Onshore a large stratovolcano, called El Chichon, intersects the prolongation of Tehuantepec FZ where the slab depth beneath is more than 200 km, an unusual depth for a subduction related volcanic arc. In this study we investigate numerically the influence of a serpentinized fracture zone rheology on the depth where hydrous instabilities (cold-plumes) are formed. Our preliminary results show that the subduction of serpentinized oceanic lithosphere plays an important depth control for the hydrous cold-plume formation, which is probable responsible for the unusual volcanism location in Southern Mexico.

  2. Basalt microlapilli in deep sea sediments of Indian Ocean in the vicinity of Vityaz fracture zone

    Digital Repository Service at National Institute of Oceanography (India)

    Nath, B.N.; Iyer, S.D.

    Two cores recovered from the flanks of Mid-India oceanic ridge in the vicinity of Vityaz fracture zone consist of discrete pyroclastic layers at various depths. These layers are composed of coarse-grained, angular basaltic microlapilli in which...

  3. Prediction of subsurface fracture in mining zone of Papua using passive seismic tomography based on Fresnel zone

    Energy Technology Data Exchange (ETDEWEB)

    Setiadi, Herlan; Nurhandoko, Bagus Endar B.; Wely, Woen [WISFIR Lab., Physics of Complex System, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Bandung 40132 (Indonesia); Riyanto, Erwin [PT Freeport Indonesia, Tembagapura, Indonesia herlansetiadi@yahoo.com (Indonesia)

    2015-04-16

    Fracture prediction in a block cave of underground mine is very important to monitor the structure of the fracture that can be harmful to the mining activities. Many methods can be used to obtain such information, such as TDR (Time Domain Relectometry) and open hole. Both of them have limitations in range measurement. Passive seismic tomography is one of the subsurface imaging method. It has advantage in terms of measurements, cost, and rich of rock physical information. This passive seismic tomography studies using Fresnel zone to model the wavepath by using frequency parameter. Fresnel zone was developed by Nurhandoko in 2000. The result of this study is tomography of P and S wave velocity which can predict position of fracture. The study also attempted to use sum of the wavefronts to obtain position and time of seismic event occurence. Fresnel zone tomography and the summation wavefront can predict location of geological structure of mine area as well.

  4. Bottom water throughflows at the Rio de Janeiro and Rio Grande Fracture Zones

    Science.gov (United States)

    Mercier, Herlé; Weatherly, Georges L.; Arhan, Michel

    2000-05-01

    Bottom water throughflows at the Rio de Janeiro Fracture Zone (22°S) and Rio Grande Fracture Zone (26°S) of the Mid-Atlantic Ridge are identified from hydrographic anomalies observed along 9°W in the Angola Basin. The throughflow water is supplied by a meridional band of cold and fresh water lying against the western flank of the Ridge.

  5. Correlation of seismic wave velocities with fracture densities: Implications for the critical zone in mountain watersheds

    Science.gov (United States)

    Peters, M. P.; Holbrook, W. S.; Flinchum, B. A.; Pasquet, S.

    2016-12-01

    Despite increasing scientific interest in the critical zone, the accurate determination of fracture density in the subsurface remains difficult as access and costs can prohibit ground-truthing through drilling. A more precise characterization of the fracturing process provides critical insight in to subsurface structures. This is particularly important in determining the point at which protolithic rock becomes fractured bedrock and then degrades to soil through the process of weathering. We studied outcrops in the Laramie Range of southeastern Wyoming were studied and fracture densities were correlated with seismic pressure (P) wave velocities. We used the Differential Effective Medium (DEM) rock physics model to validate our findings and provide a more robust characterization of the role of P-wave velocities acquired on outcrops play in critical zone science. This approach marks a significant departure from previous research, which has not applied P-wave fracture relationships in outcrops onto the critical zone for subsurface characterization. We compared our results with borehole data to establish a relationship between surface outcrops and subsurface rock structures. We found a clear, inverse relationship between a decrease in P-wave velocity and an increase in fracture density consistent with borehole data in the studied area. Our findings suggest that outcrops can be used to determine fracture density in the critical zone. We show that the use of seismic refraction surveys on outcrops provides a non-invasive, highly transferrable method through which we can predict fracturing densities in the subsurface.

  6. Magnetic lineations, fracture zones and seamounts in the Central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    KameshRaju, K.A

    demarcate the Central Indian Basin into zones, depicting right lateral offsets of the magnetic lineations A21 to A26. Multibeam sonar surveys carried out over a part of the study area depict bathymetric evidence for the 79 degrees E fracture zone. Several...

  7. Subduction of fracture zones controls mantle melting and geochemical signature above slabs.

    Science.gov (United States)

    Manea, Vlad C; Leeman, William P; Gerya, Taras; Manea, Marina; Zhu, Guizhi

    2014-10-24

    For some volcanic arcs, the geochemistry of volcanic rocks erupting above subducted oceanic fracture zones is consistent with higher than normal fluid inputs to arc magma sources. Here we use enrichment of boron (B/Zr) in volcanic arc lavas as a proxy to evaluate relative along-strike inputs of slab-derived fluids in the Aleutian, Andean, Cascades and Trans-Mexican arcs. Significant B/Zr spikes coincide with subduction of prominent fracture zones in the relatively cool Aleutian and Andean subduction zones where fracture zone subduction locally enhances fluid introduction beneath volcanic arcs. Geodynamic models of subduction have not previously considered how fracture zones may influence the melt and fluid distribution above slabs. Using high-resolution three-dimensional coupled petrological-thermomechanical numerical simulations of subduction, we show that enhanced production of slab-derived fluids and mantle wedge melts concentrate in areas where fracture zones are subducted, resulting in significant along-arc variability in magma source compositions and processes.

  8. Characterizing fractures and shear zones in crystalline rock using anisotropic seismic inversion and GPR imaging

    Science.gov (United States)

    Doetsch, Joseph; Krietsch, Hannes; Lajaunie, Myriam; Jordi, Claudio; Gischig, Valentin; Schmelzbach, Cedric; Maurer, Hansrudi

    2017-04-01

    Understanding the natural or artificially created hydraulic conductivity of a rock mass is critical for the successful exploitation of enhanced geothermal systems (EGS). The hydraulic response of fractured crystalline rock is largely governed by the spatial organization of permeable fractures. Defining the 3D geometry of these fractures and their connectivity is extremely challenging, because fractures can only be observed directly at their intersections with tunnels or boreholes. In the framework of an in-situ stimulation experiment at the Grimsel Test Site, a detailed rock mass characterization was carried out, combining geological and geophysical methods. While geological observations from tunnel mapping, core- and geophysical borehole-logging are reliable, the obtained data could just be interpolated between tunnels and boreholes. The geophysical surveys, including ground-penetration radar (GPR) imaging and tunnel-tunnel seismic tomography were able to image shear and fracture zones throughout the experimental volume. Clear GPR reflections up to a distance of 30 m from the tunnels allow to define the geometry of tunnel-mapped shear zones in the center of the experimental volume. Anisotropic traveltime inversion of tunnel-tunnel seismic data reveals fracture zones as low velocity zones and ductile shear zones as areas of increased seismic anisotropy. It is thus possible to characterize both type and geometry of shear and fracture zones, which is important for the planned rock stimulation. Combining the GPR and seismic results with the geological information, the geological model could be significantly improved, demonstrating the potential to characterize even subtle geological features in 3D.

  9. The Rapid Transient Surveyor

    CERN Document Server

    Baranec, Christoph; Wright, Shelley A; Tonry, John; Tully, R Brent; Szapudi, István; Takamiya, Marianne; Hunter, Lisa; Riddle, Reed; Chen, Shaojie; Chun, Mark

    2016-01-01

    The Rapid Transient Surveyor (RTS) is a proposed rapid-response, high-cadence adaptive optics (AO) facility for the UH 2.2-m telescope on Maunakea. RTS will uniquely address the need for high-acuity and sensitive near-infrared spectral follow-up observations of tens of thousands of objects in mere months by combining an excellent observing site, unmatched robotic observational efficiency, and an AO system that significantly increases both sensitivity and spatial resolving power. We will initially use RTS to obtain the infrared spectra of ~4,000 Type Ia supernovae identified by the Asteroid Terrestrial-Impact Last Alert System over a two year period that will be crucial to precisely measuring distances and mapping the distribution of dark matter in the z < 0.1 universe. RTS will comprise an upgraded version of the Robo-AO laser AO system and will respond quickly to target-of-opportunity events, minimizing the time between discovery and characterization. RTS will acquire simultaneous-multicolor images with a...

  10. The rapid transient surveyor

    Science.gov (United States)

    Baranec, C.; Lu, J. R.; Wright, S. A.; Tonry, J.; Tully, R. B.; Szapudi, I.; Takamiya, M.; Hunter, L.; Riddle, R.; Chen, S.; Chun, M.

    2016-07-01

    The Rapid Transient Surveyor (RTS) is a proposed rapid-response, high-cadence adaptive optics (AO) facility for the UH 2.2-m telescope on Maunakea. RTS will uniquely address the need for high-acuity and sensitive near-infrared spectral follow-up observations of tens of thousands of objects in mere months by combining an excellent observing site, unmatched robotic observational efficiency, and an AO system that significantly increases both sensitivity and spatial resolving power. We will initially use RTS to obtain the infrared spectra of 4,000 Type Ia supernovae identified by the Asteroid Terrestrial-Impact Last Alert System over a two year period that will be crucial to precisely measuring distances and mapping the distribution of dark matter in the z efficiency prism integral field unit spectrograph: R = 70-140 over a total bandpass of 840-1830nm with an 8.7" by 6.0" field of view (0.15" spaxels). The AO correction boosts the infrared point-source sensitivity of the spectrograph against the sky background by a factor of seven for faint targets, giving the UH 2.2-m the H-band sensitivity of a 5.7-m telescope without AO.

  11. Analysis for Fracture Characteristics of Porous Materials by using Cohesive Zone Models

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Seung Hyun; Ha, Sang Yul; Kim, Ki Tae [Pohang University of Science and Technology, Pohang (Korea, Republic of)

    2009-06-15

    The effect of porosity on the crack propagation is studied by using the cohesive zone model. Standard mode I fracture test were done by using compact tension specimens with various porosities. Load-load line displacement curves and {delta}5-crack resistance curves for various porosities were obtained from experiments. The cohesive zone model proposed by Xu and Needleman was employed to describe the crack propagation in porous media, and the Gurson model is used for constitutive relation of porous materials. These models were implemented into user subroutines of a finite element program ABAQUS. The fracture mode changes from ductile fracture to brittle fracture as the porosity increases. Numerical calculations agree well with experimental results.

  12. Rapid geophysical surveyor

    Energy Technology Data Exchange (ETDEWEB)

    Roybal, L.G.; Carpenter, G.S.; Josten, N.E.

    1993-01-01

    The Rapid Geophysical Surveyor (RGS) is a system designed to rapidly and economically collect closely-spaced geophysical data used for characterization of Department of Energy (DOE) waste sites. Geophysical surveys of waste sites are an important first step in the remediation and closure of these sites; especially older sties where historical records are inaccurate and survey benchmarks have changed due to refinements in coordinate controls and datum changes. Closely-spaced data are required to adequately differentiate pits, trenches, and soil vault rows whose edges may be only a few feet from each other. A prototype vehicle designed to collect magnetic field data was built at the Idaho national Engineering Laboratory (INEL) during the summer of 1992. The RGS was one of several projects funded by the Buried Waste Integrated Demonstration (BWID) program. This vehicle was demonstrated at the Subsurface Disposal Area (SDA) within the Radioactive Waste Management Complex (RWMC) on the INEL in September of 1992. Magnetic data were collected over two areas in the SDA, with a total survey area of about 1.7 acres. Data were collected at a nominal density of 2 1/2 inches along survey lines spaced 1 foot apart. Over 350,000 data points were collected over a 6 day period corresponding to about 185 man-days using conventional ground survey techniques. This report documents the design and demonstration of the RGS concept including the presentation of magnetic data collected at the SDA. The surveys were able to show pit and trench boundaries and determine details of their spatial orientation never before achieved.

  13. Rapid geophysical surveyor

    Energy Technology Data Exchange (ETDEWEB)

    Roybal, L.G.; Carpenter, G.S.; Josten, N.E.

    1993-07-01

    The Rapid Geophysical Surveyor (RGS) is a system designed to rapidly and economically collect closely-spaced geophysical data used for characterization of Department of Energy (DOE) waste sites. Geophysical surveys of waste sites are an important first step in the remediation and closure of these sites; especially older sties where historical records are inaccurate and survey benchmarks have changed due to refinements in coordinate controls and datum changes. Closely-spaced data are required to adequately differentiate pits, trenches, and soil vault rows whose edges may be only a few feet from each other. A prototype vehicle designed to collect magnetic field data was built at the Idaho national Engineering Laboratory (INEL) during the summer of 1992. The RGS was one of several projects funded by the Buried Waste Integrated Demonstration (BWID) program. This vehicle was demonstrated at the Subsurface Disposal Area (SDA) within the Radioactive Waste Management Complex (RWMC) on the INEL in September of 1992. Magnetic data were collected over two areas in the SDA, with a total survey area of about 1.7 acres. Data were collected at a nominal density of 2 1/2 inches along survey lines spaced 1 foot apart. Over 350,000 data points were collected over a 6 day period corresponding to about 185 man-days using conventional ground survey techniques. This report documents the design and demonstration of the RGS concept including the presentation of magnetic data collected at the SDA. The surveys were able to show pit and trench boundaries and determine details of their spatial orientation never before achieved.

  14. The Rapid Transient Surveyor

    Science.gov (United States)

    Baranec, Christoph; Tonry, John; Wright, Shelley; Tully, R. Brent; Lu, Jessica R.; Takamiya, Marianne Y.; Hunter, Lisa

    2016-01-01

    The next decade of astronomy will be dominated by large area surveys (see the detailed discussion in the Astro-2010 Decadal survey and NRC's recent OIR System Report). Ground-based optical transient surveys, e.g., LSST, ZTF and ATLAS and space-based exoplanet, supernova, and lensing surveys such as TESS and WFIRST will join the Gaia all-sky astrometric survey in producing a flood of data that will enable leaps in our understanding of the universe. There is a critical need for further characterization of these discoveries through high angular resolution images, deeper images, spectra, or observations at different cadences or periods than the main surveys. Such follow-up characterization must be well matched to the particular surveys, and requires sufficient additional observing resources and time to cover the extensive number of targets.We describe plans for the Rapid Transient Surveyor (RTS), a permanently mounted, rapid-response, high-cadence facility for follow-up characterization of transient objects on the U. of Hawai'i 2.2-m telescope on Maunakea. RTS will comprise an improved robotic laser adaptive optics system, based on the prototype Robo-AO system (formerly at the Palomar 1.5-m and now at the Kitt Peak 2.2-m telescope), with simultaneous visible and near-infrared imagers as well as a near-infrared integral field spectrograph (R~100, λ = 850 - 1830 nm, 0.15″ spaxels, 8.7″×6.0″ FoV). RTS will achieve an acuity of ~0.07″ in visible wavelengths and automated detection and characterization of astrophysical transients during a sustained observing campaign will yield the necessary statistics to precisely map dark matter in the local universe.

  15. Multiscale Modeling of Grain-Boundary Fracture: Cohesive Zone Models Parameterized From Atomistic Simulations

    Science.gov (United States)

    Glaessgen, Edward H.; Saether, Erik; Phillips, Dawn R.; Yamakov, Vesselin

    2006-01-01

    A multiscale modeling strategy is developed to study grain boundary fracture in polycrystalline aluminum. Atomistic simulation is used to model fundamental nanoscale deformation and fracture mechanisms and to develop a constitutive relationship for separation along a grain boundary interface. The nanoscale constitutive relationship is then parameterized within a cohesive zone model to represent variations in grain boundary properties. These variations arise from the presence of vacancies, intersticies, and other defects in addition to deviations in grain boundary angle from the baseline configuration considered in the molecular dynamics simulation. The parameterized cohesive zone models are then used to model grain boundaries within finite element analyses of aluminum polycrystals.

  16. Mutation detection using Surveyor nuclease.

    Science.gov (United States)

    Qiu, Peter; Shandilya, Harini; D'Alessio, James M; O'Connor, Kevin; Durocher, Jeffrey; Gerard, Gary F

    2004-04-01

    We have developed a simple and flexible mutation detection technology for the discovery and mapping of both known and unknown mutations. This technology is based on a new mismatch-specific DNA endonuclease from celery, Surveyor nuclease, which is a member of the CEL nuclease family of plant DNA endonucleases. Surveyor nuclease cleaves with high specificity at the 3' side of any mismatch site in both DNA strands, including all base substitutions and insertion/deletions up to at least 12 nucleotides. Surveyor nuclease technology involves four steps: (i) PCR to amplify target DNA from both mutant and wild-type reference DNA; (ii) hybridization to form heteroduplexes between mutant and wild-type reference DNA; (iii) treatment of annealed DNA with Surveyor nuclease to cleave heteroduplexes; and (iv) analysis of digested DNA products using the detection/separation platform of choice. The technology is highly sensitive, detecting rare mutants present at as low as 1 in 32 copies. Unlabeled Surveyor nuclease digestion products can be analyzed using conventional gel electrophoresis or high-performance liquid chromatography (HPLC), while end labeled digestion products are suitable for analysis by automated gel or capillary electrophoresis. The entire protocol can be performed in less than a day and is suitable for automated and high-throughput procedures.

  17. Spatial analysis of fractured rock around fault zones based on photogrammetric data

    Science.gov (United States)

    Deckert, H.; Gessner, K.; Drews, M.; Wellmann, J. F.

    2009-04-01

    The location of hydrocarbon, geothermal or hydrothermal fluids is often bound to fault zones. The fracture systems along these faults play an important role in providing pathways to fluids in the Earth's crust. Thus an evaluation of the change in permeability due to rock deformation is of particular interest in these zones. Recent advances in digital imaging using modern techniques like photogrammetry provide new opportunities to view, analyze and present high resolution geological data in three dimensions. Our method is an extension of the one-dimensional scan-line approach to quantify discontinuities in rock outcrops. It has the advantage to take into account a larger amount of spatial data than conventional manual measurement methods. It enables to recover the entity of spatial information of a 3D fracture pattern, i.e. position, orientation, extent and frequency of fractures. We present examples of outcrop scale datasets in granitic and sedimentary rocks and analyse changes in fracture patterns across fault zones from the host rock to the damage zone. We also present a method to generate discontinuity density maps from 3D surface models generated by digital photogrammetry methods. This methodology has potential for application in rock mass characterization, structural and tectonic studies, the formation of hydrothermal mineral deposits, oil and gas migration, and hydrogeology. Our analysis methods represent important steps towards developing a toolkit to automatically detect and interpret spatial rock characteristics, by taking advantage of the large amount of data that can be collected by photogrammetric methods. This acquisition of parameters defining a 3D fracture pattern allows the creation of synthetic fracture networks following these constraints. The mathematical description of such a synethtical network can be implemented into numerical simulation tools for modeling fluid flow in fracture media. We give an outline of current and future applications of

  18. The link between great earthquakes and the subduction of oceanic fracture zones

    Directory of Open Access Journals (Sweden)

    R. D. Müller

    2012-12-01

    Full Text Available Giant subduction earthquakes are known to occur in areas not previously identified as prone to high seismic risk. This highlights the need to better identify subduction zone segments potentially dominated by relatively long (up to 1000 yr and more recurrence times of giant earthquakes. We construct a model for the geometry of subduction coupling zones and combine it with global geophysical data sets to demonstrate that the occurrence of great (magnitude ≥ 8 subduction earthquakes is strongly biased towards regions associated with intersections of oceanic fracture zones and subduction zones. We use a computational recommendation technology, a type of information filtering system technique widely used in searching, sorting, classifying, and filtering very large, statistically skewed data sets on the Internet, to demonstrate a robust association and rule out a random effect. Fracture zone–subduction zone intersection regions, representing only 25% of the global subduction coupling zone, are linked with 13 of the 15 largest (magnitude Mw ≥ 8.6 and half of the 50 largest (magnitude Mw ≥ 8.4 earthquakes. In contrast, subducting volcanic ridges and chains are only biased towards smaller earthquakes (magnitude < 8. The associations captured by our statistical analysis can be conceptually related to physical differences between subducting fracture zones and volcanic chains/ridges. Fracture zones are characterised by laterally continuous, uplifted ridges that represent normal ocean crust with a high degree of structural integrity, causing strong, persistent coupling in the subduction interface. Smaller volcanic ridges and chains have a relatively fragile heterogeneous internal structure and are separated from the underlying ocean crust by a detachment interface, resulting in weak coupling and relatively small earthquakes, providing a conceptual basis for the observed dichotomy.

  19. Cohesive zone modelling and the fracture process of structural tape

    DEFF Research Database (Denmark)

    Stigh, Ulf; Biel, Anders; Svensson, Daniel

    2016-01-01

    Structural tapes provide comparable toughness as structural adhesives at orders of magnitude lower stresses. This is potentially useful to minimize the effects of differences in thermal expansion in the joining of mixed materials. The strength properties are modelled using the cohesive zone model....... Thus, a cohesive zone represents the tape, i.e. stresses in the tape are transmitted to the substrates through tractions determined by the separations of the surfaces of substrates. This simplification allows for structural analysis of large complex structures. The relation between the traction...

  20. Numerical modeling of fracking fluid migration through fault zones and fractures in the North German Basin

    Science.gov (United States)

    Pfunt, Helena; Houben, Georg; Himmelsbach, Thomas

    2016-09-01

    Gas production from shale formations by hydraulic fracturing has raised concerns about the effects on the quality of fresh groundwater. The migration of injected fracking fluids towards the surface was investigated in the North German Basin, based on the known standard lithology. This included cases with natural preferential pathways such as permeable fault zones and fracture networks. Conservative assumptions were applied in the simulation of flow and mass transport triggered by a high pressure boundary of up to 50 MPa excess pressure. The results show no significant fluid migration for a case with undisturbed cap rocks and a maximum of 41 m vertical transport within a permeable fault zone during the pressurization. Open fractures, if present, strongly control the flow field and migration; here vertical transport of fracking fluids reaches up to 200 m during hydraulic fracturing simulation. Long-term transport of the injected water was simulated for 300 years. The fracking fluid rises vertically within the fault zone up to 485 m due to buoyancy. Progressively, it is transported horizontally into sandstone layers, following the natural groundwater flow direction. In the long-term, the injected fluids are diluted to minor concentrations. Despite the presence of permeable pathways, the injected fracking fluids in the reported model did not reach near-surface aquifers, either during the hydraulic fracturing or in the long term. Therefore, the probability of impacts on shallow groundwater by the rise of fracking fluids from a deep shale-gas formation through the geological underground to the surface is small.

  1. Spatial patterns of bacterial and archaeal communities along the Romanche Fracture Zone (tropical Atlantic)

    NARCIS (Netherlands)

    Lekunberri, Itziar; Sintes, Eva; de Corte, Daniele; Yokokawa, Taichi; Herndl, Gerhard J.

    2013-01-01

    The composition of prokaryotic communities was determined in the meso- and bathypelagic waters funneled through the Romanche Fracture Zone (RFZ, 2 degrees 7'S, 31 degrees 79'W to 0 degrees 6'N, 14 degrees 33'W) in the tropical Atlantic. Distinct water masses were identified based on their physical a

  2. Deep and bottom water characteristics in the Owen Fracture Zone, Western Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Naqvi, S.W.A.; Kureishy, T.W.

    Hydro chemical studies at a station (10 degrees 34.l'N,56 degrees 31,7'E) in the Owen Fracture zone reveal an active movement of bottom water as approx 75 m thick, cold, low-salinity layer. Silicate profile exhibits a broad maximum coinciding with a...

  3. Multibeam bathymetric, gravity and magnetic studies over 79 degrees E fracture zone, central Indian basin

    Digital Repository Service at National Institute of Oceanography (India)

    KameshRaju, K.A.; Ramprasad, T.; Kodagali, V.N.; Nair, R.R.

    A regional scale bathymetric map has been constructed for the 79 degrees E fracture zone (FZ) in the Central Indian Basin between 10 degrees 15'S and 14 degrees 45'S lat. and 78 degrees 55'E and 79 degrees 20'E long. using the high...

  4. Analysis of fracture process zone in brittle rock subjected to shear-compressive loading

    Institute of Scientific and Technical Information of China (English)

    ZHOU De-quan; CHEN Feng; CAO Ping; MA Chun-de

    2005-01-01

    An analytical expression for the prediction of shear-compressive fracture process zone(SCFPZ) is derived by using a proposed local strain energy density criterion, in which the strain energy density is separated into the dilatational and distortional strain energy density, only the former is considered to contribute to the brittle fracture of rock in different loading cases. The theoretical prediction by this criterion shows that the SCFPZ is of asymmetric mulberry leaf in shape, which forms a shear-compression fracture kern. Dilatational strain energy density along the boundary of SCFPZ reaches its maximum value. The dimension of SCFPZ is governed by the ratio of KⅡ to KⅠ . The analytical results are then compared with those from literatures and the tests conducted on double edge cracked Brazilian disk subjected to diametrical compression. The obtained results are useful to the prediction of crack extension and to nonlinear analysis of shear-compressive fracture of brittle rock.

  5. Comprehensive assessment on dynamic roof instability under fractured rock mass conditions in the excavation disturbed zone

    Institute of Scientific and Technical Information of China (English)

    Xing-ping Lai; Fen-hua Ren; Yong-ping Wu; Mei-feng Cai

    2009-01-01

    The damage process of fractured rock mass showed that the fracture in rocks induced roof collapse in Yangchangwan Coal Mine,China.The rock mass was particularly weak and fractured.There occurred 6 large-scale dynamical roof falls in the excavation disturbed zone (EDZ) with the collapsing volume of 216 m3.First,the field detailed geological environment,regional seismic dy-namics,and dynamic instability of roadways were generally investigated.Second,the field multiple-index monitoring measurements for detecting the deep delamination of the roof,convergence deformation,bolt-cable load,acoustic emission (AE) characteristic pa-rameters,total AE events,AE energy-releasing rate,rock mass fracture,and damage were arranged.Finally,according to the time-space-strength relations,a quantitative assessment of the influence of rock-mass damage on the dynamic roof instability was accomplished.

  6. The margin between Senja and Spitsbergen fracture zones: Implications from plate tectonics

    Science.gov (United States)

    Myhre, Annik M.; Eldholm, Olav; Sundvor, Eirik

    1982-10-01

    Analysis of multichannel seismic data from the continental margin off Svalbard between the Senja and Spitsbergen fracture zones suggests that the transition between continental and oceanic crust is located at or close to the Hornsund Fault Zone. In the Late Paleocene/Early Eoeene (57 m.y.) the region between Svalbard and Northeast-Greenland was subjected to regional shear movements associated with a transform system between the young Lofoten-Greenland Basin and the Arctic Ocean. Approximately 50 m.y. ago the spreading axis migrated to the northeast creating a deep basin north of the Greenland-Senja Fracture Zone forming the passive margin between Bear Island and 76.5°N. North of 76.5°N the regional transform was maintained. At the time of the main reorganization of relative plate motion (36 m.y.) the northern margin evolved. A continental fragment was possibly cut off from the Svalbard margin forming a small microcontinent. The microcontinent appears as the submarine ridge which has been associated with the Hovgaard Fracture Zone. It is suggested that the sediments west of the Hornsund Fault Zone are not older than Eocene in the south and mid-Oligocene in the north. The position of the spreading axis has greatly influenced the margin sedimentation.

  7. Hydrogeological characterisation and modelling of deformation zones and fracture domains, Forsmark modelling stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Follin, Sven (SF GeoLogic AB, Taeby (SE)); Leven, Jakob (Swedish Nuclear Fuel and Waste Management Co., Stockholm (SE)); Hartley, Lee; Jackson, Peter; Joyce, Steve; Roberts, David; Swift, Ben (Serco Assurance, Harwell (GB))

    2007-09-15

    The work reported here collates the structural-hydraulic information gathered in 21 cored boreholes and 32 percussion-drilled boreholes belonging to Forsmark site description, modelling stage 2.2. The analyses carried out provide the hydrogeological input descriptions of the bedrock in Forsmark needed by the end users Repository Engineering, Safety Assessment and Environmental Impact Assessment; that is, hydraulic properties of deformation zones and fracture domains. The same information is also needed for constructing 3D groundwater flow models of the Forsmark site and surrounding area. The analyses carried out render the following conceptual model regarding the observed heterogeneity in deformation zone transmissivity: We find the geological division of the deterministically modelled deformation zones into eight categories (sets) useful from a hydrogeological point of view. Seven of the eight categories are steeply dipping, WNW, NW, NNW, NNE, NE, ENE and EW, and on is gently dipping, G. All deformation zones, regardless of orientation (strike and dip), are subjected to a substantial decrease in transmissivity with depth. The data gathered suggest a contrast of c. 20,000 times for the uppermost one kilometre of bedrock, i.e. more than four orders of magnitude. The hydraulic properties below this depth are not investigated. The lateral heterogeneity is also substantial but more irregular in its appearance. For instance, for a given elevation and deformation zone category (orientation), the spatial variability in transmissivity within a particular deformation zone appears to be as large as the variability between all deformation zones. This suggests that the lateral correlation length is shorter than the shortest distance between two adjacent observation points and shorter than the category spacing. The observation that the mean transmissivity of the gently-dipping deformation zones is c. one to two orders of magnitude greater than the mean transmissivities of all

  8. Fissure swarms and fracture systems within the Western Volcanic Zone, Iceland - Effects of spreading rates

    Science.gov (United States)

    Hjartardóttir, Ásta Rut; Einarsson, Páll; Björgvinsdóttir, Sigríður G.

    2016-10-01

    The Western Volcanic Zone (WVZ) in Iceland is ∼120 km long and 40 km wide. It offers an opportunity to study rift zones in a local ultra-slow spreading area close to a hotspot. Fractures were mapped from aerial photographs and digital elevation models. Most surface fractures are located in the southern part of the WVZ. The majority of the fractures have a north-northeasterly orientation, some deviations occur from this, especially in the north part of the WVZ. Fracture orientations are therefore quite uniform in the southern, faster spreading part of the WVZ, but more irregular in the slower-spreading northern part. This suggests different stress fields in the north part, which could be due to the influence of the Hreppar microplate and possibly also due to stress fields induced by crustal deformation because of changes in glacial load in the area. Such glacially-induced stress fields may have similar or even more influence than crustal spreading in the slower spreading northern part of the WVZ. Lower fracture density towards the north within the WVZ suggests lower frequency of rifting events in the north part, in accordance with less spreading in the north as measured by GPS geodetic measurements.

  9. Oceanic crust formation in the Egeria Fracture Zone Complex (Central Indian Ocean)

    Science.gov (United States)

    Le Minor, Marine; Gaina, Carmen; Sigloch, Karin; Minakov, Alexander

    2016-04-01

    This study aims to analyse in detail the oceanic crust fabric and volcanic features (seamounts) formed for the last 10 million years at the Central Indian Ridge between 19 and 21 latitude south. Multibeam bathymetry and magnetic data has been collected in 2013 as part of the French-German expedition RHUM-RUM (Reunion hotspot and upper mantle - Reunion's unterer mantel). Three long profiles perpendicular on the Central Indian Ridge (CIR), south of the Egeria fracture zone, document the formation of oceanic crust since 10 million years, along with changes in plate kinematics and variations in the magmatic input. We have inspected the abyssal hill geometry and orientation along conjugate oceanic flanks and within one fracture zone segment where we could identify J-shaped features that are indicators of changes in plate kinematics. The magnetic anomaly data shows a slight asymmetry in seafloor spreading rates on conjugate flanks: while a steady increase in spreading rate from 10 Ma to the present is shown by the western flank, the eastern part displays a slowing down from 5 Ma onwards. The deflection of the anti J-shaped abyssal hill lineations suggest that the left-stepping Egeria fracture zone complex (including the Egeria, Flinders and an un-named fracture zone to the southeast) was under transpression from 9 to 6 Ma and under transtension since 3 Ma. The transpressional event was triggered by a clockwise mid-ocean ridge reorientation and a decrease of its offset, whereas the transtensional regime was probably due to a counter-clockwise change in the spreading direction and an increase of the ridge offset. The new multibeam data along the three profiles reveal that crust on the eastern side is smoother (as shown by the abyssal hill number and structure) and hosts several seamounts (with age estimations of 7.67, 6.10 and 0.79 Ma), in contrast to the rougher conjugate western flank. Considering that the western flank was closer to the Reunion plume, and therefore

  10. Challenges to Building Surveyors From The Perspectives Of Non Surveyors

    Directory of Open Access Journals (Sweden)

    Isnin Zarina

    2016-01-01

    Full Text Available Awareness on the importance of Building Surveyors in Malaysia is still low as the role and skills of this profession are not fully understood. Although studies indicated that Building Surveyors are still in demand, even without the Building Surveyor Act, many graduates are experiencing inadequate employment opportunities in the current economic situation. Little is known on the views from other stakeholders about BS. This research aims to examine the awareness and opinions on BS in Malaysia amongst construction stakeholders. Questionnaire surveys were collected from 120 respondents from construction, maintenance and insurance companies and interviews were conducted to selected built environment respondents. It was found that awareness and knowledge on BS are still low as they lack information on the profession and professional recognitions. Some views indicated on a major identity crisis for having fragmented and disparate range of modules. The cause may have resulted in problems on public recognition, poor understanding of the surveyor’s skills, and fewer job opportunities. Several suggested the profession to have a clear, coherent and relevant identity, with strong professional structures in order for the profession to survive and gain recognition from the government. Graduates are also recommended to acquire other skills and training in order for them to be significant to the construction industry.

  11. [Different multidisciplinary approaches of two traumatic teeth fractures in the esthetic zone: a case report].

    Science.gov (United States)

    Jia, Xue-ting; Zhen, Min; Hu, Wen-jie; Liu, Yun-song

    2015-10-18

    In this article, different methods to deal with teeth fractures were discussed by presenting a case of traumatic crown-root fracture in the anterior esthetic zone. The traumatic crown-root fracture is a common problem in clinic. When a fracture line locates in close proximity to or below the alveolar bone crest, the fracture most likely involve the junctional epithelium and the connective tissue attachment. This type of fracture becomes a challenge for restorative dentists because it involves biologic, functional, and esthetic considerations, especially when the fracture occurs in an esthetic area. In this case, a young patient presented with two fractured upper anterior teeth to the Department of Periodontics, Peking University School and Hospital of Stomatology. After the comprehensive clinical evaluation, the right central incisor was decided to extract for implant therapy and the right lateral incisor was decided to retain by one modified crown lengthening surgery. The most common technique applied to save a retained root is a clinical crown lengthening procedure. However, the aggressive alveolar bone resection of both target and adjacent teeth to reestablish the bone width and periodontal health may compromise functional and esthetic outcomes. To reduce loss of excessive osseous tissue during osteotomy procedure, the modified crown lengthening of the right lateral incisor was performed, including minor bone resection and root reshaping. Regarding the right central incisor, the retained root was all located below the alveolar bone crest. The extraction and implant procedure, combined with guided bone graft were performed to avoid the damage to neighbor teeth during traditional restorative therapy and to reshape a preferable buccal contour. At the last visit, the patient was recalled with healthy periodontium, normal tooth function and favorable esthetic results.

  12. Subduction of Fracture Zones control mantle melting and geochemical signature above slabs

    Science.gov (United States)

    Constantin Manea, Vlad; Leeman, William; Gerya, Taras; Manea, Marina; Zhu, Guizhi

    2014-05-01

    The geochemistry of arc volcanics proximal to oceanic fracture zones (FZs) is consistent with higher than normal fluid inputs to arc magma sources. Here, enrichment of boron (B/Zr) in volcanic arc lavas is used to evaluate relative along-strike inputs of slab-derived fluids in the Aleutian, Andean, Cascades, and Trans-Mexican arcs. Significant B/Zr spikes coincide with subduction of prominent FZs in the relatively cool Aleutian and Andean subduction zones, but not in the relatively warm Cascadia and Mexican subduction zones, suggesting that FZ subduction locally enhances fluid introduction beneath volcanic arcs, and retention of fluids to sub-arc depths diminishes with subduction zone thermal gradient. Geodynamic treatments of lateral inhomogeneities in subducting plates have not previously considered how FZs may influence the melt and fluid distribution above the slab. Using high-resolution three-dimensional coupled petrological-thermomechanical numerical simulations of subduction, we show that fluids, including melts and water, concentrate in areas where fracture zones are subducted, resulting in along-arc variability in magma source compositions and processes.

  13. The Northern Central Indian Ridge: Geology and tectonics of fracture zones-dominated spreading ridge segments

    Digital Repository Service at National Institute of Oceanography (India)

    Drolia, R.K.; Iyer, S.D.; Chakraborty, B.; Kodagali, V.N.; Ray, Dwijesh; Misra, S.; Andrade, R.; Sarma, K.V.L.N.S.; Rajasekhar, R.P.; Mukhopadhyay, R.

    - OCEANIC RIDGES CURRENT SCIENCE, VOL. 85, NO. 3, 10 AUGUST 2003 The Northern Central Indian Ridge: Geology and tectonics of fracture zones - dominated spreading ridge segments R. K. Drolia*, Sridhar D. Iyer ? , B. Chakraborty, V. N. Kodagali, D... anomalies are plotted perpendicular to cruise tracks. SPECIAL SECTION: MID - OCEANIC RIDGES CURRENT SCIENCE, VOL. 85, NO. 3, 10 AUGUST 2003 291 20 ? 18 Ma old and runs along the equator from the CIR in the west to the Wharton Basin in the east...

  14. Early Pliocene paleoceanography of the Vityaz Fracture Zone (VFZ), Central Indian Ridge

    Digital Repository Service at National Institute of Oceanography (India)

    Guptha, M.V.S.; Banerjee, R.; Mergulhao, L.P.; Banerjee, P.; Parthiban, G.; Tewari, M.

    . ************************************************************************ Keywords: Central Indian Ridge, Vityaz Fracture Zone, Ferromanganese crust, Biogenic loom, Freshwater influx, Neogene, Spores, Asian monsoon ************************************************************************ * Present address: 62, Sagar Society... (?) spores were examined using SEM (JEOL-JSM5800 LV). The plant and fungal (?) spores were determined by counting them from 20 fields of view at a magnification of x3,500. δ 18 O of all the samples were measured by mass spectrometry at the Physical...

  15. Greenland Fracture Zone-East Greenland Ridge(s) revisited: Indications of a C22-change in plate motion?

    DEFF Research Database (Denmark)

    Døssing, Arne; Funck, T.

    2012-01-01

    Fracture Zone and separation of the 200-km-long, fracture-zone-parallel continental East Greenland Ridge from the Eurasia plate is thought to be related to a major change in relative plate motions between Greenland and Eurasia during the earliest Oligocene (Chron 13 time). This study presents...... a reinterpretation of the Greenland Fracture Zone -East Greenland Ridge based on new and existing geophysical data. Evidence is shown for two overstepping ridge segments (Segments A and B) of which Segment A corresponds to the already known East Greenland Ridge while Segment B was not detected previously....... Interpretation of sonobuoy data and revised modeling of existing OBS data across Segment B indicate a continental composition of the segment. This interpretation is supported by magnetic anomaly data. The Segments A and B are bounded by portions of the Greenland Fracture Zone with a distinct similar to 10...

  16. Contrast in manganese nodule distribution on either side of 79~'E fracture zone in central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    Kodagali, V.N.

    Seabed topography is one of the prime factors in controlling the distribution of manganese nodules. Study of the nodule abundance on either side of the 79~'E fracture zone in the Central Indian Basin (idenfitied from multibeam bathymetric data...

  17. Molecular-dynamics Simulation-based Cohesive Zone Representation of Intergranular Fracture Processes in Aluminum

    Science.gov (United States)

    Yamakov, Vesselin I.; Saether, Erik; Phillips, Dawn R.; Glaessgen, Edward H.

    2006-01-01

    A traction-displacement relationship that may be embedded into a cohesive zone model for microscale problems of intergranular fracture is extracted from atomistic molecular-dynamics simulations. A molecular-dynamics model for crack propagation under steady-state conditions is developed to analyze intergranular fracture along a flat 99 [1 1 0] symmetric tilt grain boundary in aluminum. Under hydrostatic tensile load, the simulation reveals asymmetric crack propagation in the two opposite directions along the grain boundary. In one direction, the crack propagates in a brittle manner by cleavage with very little or no dislocation emission, and in the other direction, the propagation is ductile through the mechanism of deformation twinning. This behavior is consistent with the Rice criterion for cleavage vs. dislocation blunting transition at the crack tip. The preference for twinning to dislocation slip is in agreement with the predictions of the Tadmor and Hai criterion. A comparison with finite element calculations shows that while the stress field around the brittle crack tip follows the expected elastic solution for the given boundary conditions of the model, the stress field around the twinning crack tip has a strong plastic contribution. Through the definition of a Cohesive-Zone-Volume-Element an atomistic analog to a continuum cohesive zone model element - the results from the molecular-dynamics simulation are recast to obtain an average continuum traction-displacement relationship to represent cohesive zone interaction along a characteristic length of the grain boundary interface for the cases of ductile and brittle decohesion. Keywords: Crack-tip plasticity; Cohesive zone model; Grain boundary decohesion; Intergranular fracture; Molecular-dynamics simulation

  18. Flow dynamics and potential for Biodegradation of Organic Contaminants in Fractured Rock Vadose Zones

    Energy Technology Data Exchange (ETDEWEB)

    Geller, J.T.; Holman, H.-Y.; Su, T.-S.; Liou, M.S.; Conrad, M.S.; Pruess, K.; Hunter-Devera, J.C.

    1998-12-01

    We present an experimental approach for investigating the potential for bioremediation of volatile organic chemicals (VOCs) in fractured-rock vadose zones. This approach is based on the coupling of fluid flow dynamics and biotransformation processes. Fluid flow and distribution within fracture networks may be a significant factor in the ability of microorganisms to degrade VOCs, as they affect the availability of substrate, moisture and nutrients. Biological activity can change liquid surface tension and generate biofilms that may change the nettability of solid surfaces, locally alter fracture permeability and redirect infiltrating liquids. Our approach has four components: (1) establishing a conceptual model for fluid and contaminant distribution in the geologic matrix of interest; (2) physical and numerical experiments of liquid seepage in the fracture plane; (3) non-destructive monitoring of biotransformations on rock surfaces at the micron-scale; and, (4) integration of flow and biological activity in natural rock ''geocosms''. Geocosms are core-scale flow cells that incorporate some aspects of natural conditions, such as liquid seepage in the fracture plane and moisture content. The experimental work was performed with rock samples and indigenous microorganisms from the site of the US Department of Energy's Idaho National Engineering and Environmental Laboratory (INEEL), located in a basalt flow basin where VOC contamination threatens the Snake River Aquifer. The insights gained from this approach should contribute to the design of techniques to monitor and stimulate naturally occurring biological activity and control the spread of organic contaminants.

  19. Flow dynamics and potential for biodegradation of organic contaminants in fractured rock vadose zones

    Science.gov (United States)

    Geller, J. T.; Holman, H.-Y.; Su, G.; Conrad, M. E.; Pruess, K.; Hunter-Cevera, J. C.

    2000-04-01

    We present an experimental approach for investigating the potential for bioremediation of volatile organic compounds (VOCs) in fractured rock vadose zones. The experimental work was performed with rock samples and indigenous microorganisms from the site of the United States Department of Energy's Idaho National Engineering and Environmental Laboratory (INEEL), located in a basalt flow basin where VOC contamination threatens the Snake River Aquifer. Our approach has four components: (1) establishing a conceptual model for fluid and contaminant distribution in the geologic matrix of interest; (2) identification of important features of liquid distribution by means of seepage experiments in the fracture plane; (3) identification of the presence and activity of microorganisms by non-destructive monitoring of biotransformations on rock surfaces at the micron-scale; and (4) integration of flow and biological activity in natural rock "geocosms". Geocosms are core-scale flow cells that incorporate some aspects of natural conditions, such as liquid seepage in the fracture plane and moisture content. Fluid flow and distribution within fracture networks may be a significant factor in the ability of microorganisms to degrade VOCs, as they affect the availability of substrate, moisture and nutrients. Flow visualization and tracer breakthrough curves in transparent fracture replicas for unsaturated inlet conditions exhibited the channelized and intermittent nature of liquid seepage. The seepage of water and non-aqueous phase liquids (NAPLs) of varying physical and chemical properties into an initially dry replica showed only subtle differences in liquid distribution. In contrast, the seepage of a NAPL into the fracture replica containing residual water resulted in complex trapping of NAPL along the solid/water/air contact lines and diversion of NAPL to previously dry parts of the fracture. We found that a mixed culture of viable bacteria exists on the natural rock surfaces

  20. Geochemical evolution of a fractured zone in the cap rock of an underground carbon storage site

    Science.gov (United States)

    Vialle, S.; Druhan, J. L.; Maher, K.

    2013-12-01

    Assessment and management of environmental risks associated with underground storage of CO2 in geological systems is essential for the commercial deployment of this technology. A major risk is leakage of the CO2 from its storage reservoir, through wellbores, and along faults and fractures in the cap rock. The geochemical reactions likely to take place as CO2 leaks through a damage zone and their impact on cap rock integrity still need to be better understood and quantified. Should CO2 leakage occur, geochemical reactions would govern the environmental impact on shallow groundwater aquifers and could provide an indication of the leak prior to surface-based monitoring techniques. We used the reactive transport code TOUGH2/TOUGHREACT to model a leakage scenario through a fractured cap rock. Since geochemical reactions will strongly depend upon the local hydrodynamics of the CO2 leak, the first step of the study is to provide an appropriate physical representation of fluid flow through the system. Typically, for a low porosity rock formation, a fault/damaged zone system is composed of a core of low permeability and a damage zone with second-order fractures whose density decreases with distance from the fault core. Permeability is thus increased along the fault plane and laterally decreases down to the permeability value of the undamaged cap rock. Appropriate scaling relationships (e.g., and analytical expression of for permeability as a function of fracture aperture and fracture density), effective physical parameters as well as constitutive relationships are carefully chosen to model the fractured system, treated as an equivalent porous medium. The cap rock is initially saturated with brine (salinity of 0.15 in mass fraction) and due to overpressure in the lower storage reservoir, CO2 migrates through the damage zone. Geochemical reactions involve both salt precipitation due to the partitioning of H2O and CO2 between liquid and gas phases as well as well reactions

  1. Revealing the unexplored fungal communities in deep groundwater of crystalline bedrock fracture zones in Olkiluoto, Finland.

    Science.gov (United States)

    Sohlberg, Elina; Bomberg, Malin; Miettinen, Hanna; Nyyssönen, Mari; Salavirta, Heikki; Vikman, Minna; Itävaara, Merja

    2015-01-01

    The diversity and functional role of fungi, one of the ecologically most important groups of eukaryotic microorganisms, remains largely unknown in deep biosphere environments. In this study we investigated fungal communities in packer-isolated bedrock fractures in Olkiluoto, Finland at depths ranging from 296 to 798 m below surface level. DNA- and cDNA-based high-throughput amplicon sequencing analysis of the fungal internal transcribed spacer (ITS) gene markers was used to examine the total fungal diversity and to identify the active members in deep fracture zones at different depths. Results showed that fungi were present in fracture zones at all depths and fungal diversity was higher than expected. Most of the observed fungal sequences belonged to the phylum Ascomycota. Phyla Basidiomycota and Chytridiomycota were only represented as a minor part of the fungal community. Dominating fungal classes in the deep bedrock aquifers were Sordariomycetes, Eurotiomycetes, and Dothideomycetes from the Ascomycota phylum and classes Microbotryomycetes and Tremellomycetes from the Basidiomycota phylum, which are the most frequently detected fungal taxa reported also from deep sea environments. In addition some fungal sequences represented potentially novel fungal species. Active fungi were detected in most of the fracture zones, which proves that fungi are able to maintain cellular activity in these oligotrophic conditions. Possible roles of fungi and their origin in deep bedrock groundwater can only be speculated in the light of current knowledge but some species may be specifically adapted to deep subsurface environment and may play important roles in the utilization and recycling of nutrients and thus sustaining the deep subsurface microbial community.

  2. Revealing the unexplored fungal communities in deep groundwater of crystalline bedrock fracture zones in Olkiluoto, Finland

    Directory of Open Access Journals (Sweden)

    Elina eSohlberg

    2015-06-01

    Full Text Available The diversity and functional role of fungi, one of the ecologically most important groups of eukaryotic microorganisms, remains largely unknown in deep biosphere environments. In this study we investigated fungal communities in packer-isolated bedrock fractures in Olkiluoto, Finland at depths ranging from 296 m to 798 m below surface level. DNA- and cDNA-based high-throughput amplicon sequencing analysis of the fungal internal transcribed spacer (ITS gene markers was used to examine the total fungal diversity and to identify the active members in deep fracture zones at different depths. Results showed that fungi were present in fracture zones at all depths and fungal diversity was higher than expected. Most of the observed fungal sequences belonged to the phylum Ascomycota. Phyla Basidiomycota and Chytridiomycota were only represented as a minor part of the fungal community. Dominating fungal classes in the deep bedrock aquifers were Sordariomycetes, Eurotiomycetes and Dothideomycetes from the Ascomycota phylum and classes Microbotryomycetes and Tremellomycetes from the Basidiomycota phylum, which are the most frequently detected fungal taxa reported also from deep sea environments. In addition some fungal sequences represented potentially novel fungal species. Active fungi were detected in most of the fracture zones, which proves that fungi are able to maintain cellular activity in these oligotrophic conditions. Possible roles of fungi and their origin in deep bedrock groundwater can only be speculated in the light of current knowledge but some species may be specifically adapted to deep subsurface environment and may play important roles in the utilization and recycling of nutrients and thus sustaining the deep subsurface microbial community.

  3. Revealing the unexplored fungal communities in deep groundwater of crystalline bedrock fracture zones in Olkiluoto, Finland

    Science.gov (United States)

    Sohlberg, Elina; Bomberg, Malin; Miettinen, Hanna; Nyyssönen, Mari; Salavirta, Heikki; Vikman, Minna; Itävaara, Merja

    2015-01-01

    The diversity and functional role of fungi, one of the ecologically most important groups of eukaryotic microorganisms, remains largely unknown in deep biosphere environments. In this study we investigated fungal communities in packer-isolated bedrock fractures in Olkiluoto, Finland at depths ranging from 296 to 798 m below surface level. DNA- and cDNA-based high-throughput amplicon sequencing analysis of the fungal internal transcribed spacer (ITS) gene markers was used to examine the total fungal diversity and to identify the active members in deep fracture zones at different depths. Results showed that fungi were present in fracture zones at all depths and fungal diversity was higher than expected. Most of the observed fungal sequences belonged to the phylum Ascomycota. Phyla Basidiomycota and Chytridiomycota were only represented as a minor part of the fungal community. Dominating fungal classes in the deep bedrock aquifers were Sordariomycetes, Eurotiomycetes, and Dothideomycetes from the Ascomycota phylum and classes Microbotryomycetes and Tremellomycetes from the Basidiomycota phylum, which are the most frequently detected fungal taxa reported also from deep sea environments. In addition some fungal sequences represented potentially novel fungal species. Active fungi were detected in most of the fracture zones, which proves that fungi are able to maintain cellular activity in these oligotrophic conditions. Possible roles of fungi and their origin in deep bedrock groundwater can only be speculated in the light of current knowledge but some species may be specifically adapted to deep subsurface environment and may play important roles in the utilization and recycling of nutrients and thus sustaining the deep subsurface microbial community. PMID:26106376

  4. 46 CFR 153.1101 - Procedures for getting a Surveyor: Approval of Surveyors.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Procedures for getting a Surveyor: Approval of Surveyors. 153.1101 Section 153.1101 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Approval of Surveyors...

  5. Dynamic fracturing by successive coseismic loadings leads to pulverization in active fault zones

    Science.gov (United States)

    Aben, F. M.; Doan, M.-L.; Mitchell, T. M.; Toussaint, R.; Reuschlé, T.; Fondriest, M.; Gratier, J.-P.; Renard, F.

    2016-04-01

    Previous studies show that pulverized rocks observed along large faults can be created by single high-strain rate loadings in the laboratory, provided that the strain rate is higher than a certain pulverization threshold. Such loadings are analogous to large seismic events. In reality, pulverized rocks have been subject to numerous seismic events rather than one single event. Therefore, the effect of successive "milder" high-strain rate loadings on the pulverization threshold is investigated by applying loading conditions below the initial pulverization threshold. Single and successive loading experiments were performed on quartz-monzonite using a Split Hopkinson Pressure Bar apparatus. Damage-dependent petrophysical properties and elastic moduli were monitored by applying incremental strains. Furthermore, it is shown that the pulverization threshold can be reduced by successive "milder" dynamic loadings from strain rates of ~180 s-1 to ~90 s-1. To do so, it is imperative that the rock experiences dynamic fracturing during the successive loadings prior to pulverization. Combined with loading conditions during an earthquake rupture event, the following generalized fault damage zone structure perpendicular to the fault will develop: furthest from the fault plane, there is a stationary outer boundary that bounds a zone of dynamically fractured rocks. Closer to the fault, a pulverization boundary delimits a band of pulverized rock. Consecutive seismic events will cause progressive broadening of the band of pulverized rocks, eventually creating a wider damage zone observed in mature faults.

  6. Characterization of Fractures and Flow Zones in a Contaminated Shale at the Watervliet Arsenal, Albany County, New York

    Science.gov (United States)

    Williams, John H.; Paillet, Frederick L.

    2002-01-01

    Flow zones in a fractured shale in and near a plume of volatile organic compounds at the Watervliet Arsenal in Albany County, N. Y. were characterized through the integrated analysis of geophysical logs and single- and cross-hole flow tests. Information on the fracture-flow network at the site was needed to design an effective groundwater monitoring system, estimate offsite contaminant migration, and evaluate potential containment and remedial actions.Four newly drilled coreholes and four older monitoring wells were logged and tested to define the distribution and orientation of fractures that intersected a combined total of 500 feet of open hole. Analysis of borehole-wall image logs obtained with acoustic and optical televiewers indicated 79 subhorizontal to steeply dipping fractures with a wide range of dip directions. Analysis of fluid resistivity, temperature, and heat-pulse and electromagnetic flowmeter logs obtained under ambient and short-term stressed conditions identified 14 flow zones, which consist of one to several fractures and whose estimated transmissivity values range from 0.1 to more than 250 feet squared per day.Cross-hole flow tests, which were used to characterize the hydraulic connection between fracture-flow zones intersected by the boreholes, entailed (1) injection into or extraction from boreholes that penetrated a single fracture-flow zone or whose zones were isolated by an inflatable packer, and (2) measurement of the transient response of water levels and flow in surrounding boreholes. Results indicate a wellconnected fracture network with an estimated transmissivity of 80 to 250 feet squared per day that extends for at least 200 feet across the site. This interconnected fracture-flow network greatly affects the hydrology of the site and has important implications for contaminant monitoring and remedial actions.

  7. Techniques for Source Zone and Plume Characterization of Tetrachloroethene in Fractured Limestone Aquifers

    DEFF Research Database (Denmark)

    Fjordbøge, Annika Sidelmann; Mosthaf, Klaus; Janniche, Gry S.;

    Characterization of chlorinated solvents in fractured limestone aquifers is essential for proper development of site specific conceptual models and subsequent risk assessment and remediation. High resolution characterization is challenged by the difficulties involved in collection of intact core...... samples as water flushing during drilling often results in extensive core losses, especially from zones with soft limestone in contact with flint beds. Field investigations with alternative characterization techniques have been carried out at two Danish sites with tetrachloroethene (PCE) contaminated...... fractured limestone aquifers. The two sites represent different scales (source and plume) and contaminant levels (DNAPL and dissolved). The scope of the investigations was to evaluate different techniques for characterization of the contaminant distribution in the limestone aquifers and to obtain...

  8. Hydrogeological impact of fault zones on a fractured carbonate aquifer, Semmering (Austria)

    Science.gov (United States)

    Mayaud, Cyril; Winkler, Gerfried; Reichl, Peter

    2015-04-01

    Fault zones are the result of tectonic processes and are geometrical features frequently encountered in carbonate aquifer systems. They can hamper the fluid migration (hydrogeological barriers), propagate the movement of fluid (draining conduits) or be a combination of both processes. Numerical modelling of fractured carbonate aquifer systems is strongly bound on the knowledge of a profound conceptual model including geological and tectonic settings such as fault zones. In further consequence, numerical models can be used to evaluate the conceptual model and its introduced approximations. The study was conducted in a fractured carbonate aquifer built up by permomesozoic dolo/limestones of the Semmering-Wechsel complex in the Eastern Alps (Austria). The aquifer has an assumed thickness of about 200 m and dips to the north. It is covered by a thin quartzite layer and a very low permeable layer of quartz-phyllite having a thickness of up to several hundred meters. The carbonate layer crops out only in the southern part of the investigation area, where it receives autogenic recharge. The geological complexity affects some uncertainties related to the extent of the model area, which was determined to be about 15 km². Three vertical fault zones cross the area approximately in a N-S direction. The test site includes an infrastructural pilot tunnel gallery of 4.3 km length with two pumping stations, respectively active since August 1997 and June 1998. The total pumping rate is about 90 l/s and the drawdown data were analysed analytically, providing a hydraulic conductivity of about 5E-05 m/s for the carbonate layer. About 120 m drawdown between the initial situation and situation with pumping is reported by piezometers. This led to the drying up of one spring located at the southern border of the carbonates. A continuum approach using MODFLOW-2005 was applied to reproduce numerically the observed aquifer behaviour and investigate the impact of the three fault zones. First

  9. Fault interaction and stresses along broad oceanic transform zone: Tjörnes Fracture Zone, north Iceland

    Science.gov (United States)

    Homberg, C.; Bergerat, F.; Angelier, J.; Garcia, S.

    2010-02-01

    Transform motion along oceanic transforms generally occurs along narrow faults zones. Another class of oceanic transforms exists where the plate boundary is quite large (˜100 km) and includes several subparallel faults. Using a 2-D numerical modeling, we simulate the slip distribution and the crustal stress field geometry within such broad oceanic transforms (BOTs). We examine the possible configurations and evolution of such BOTs, where the plate boundary includes one, two, or three faults. Our experiments show that at any time during the development of the plate boundary, the plate motion is not distributed along each of the plate boundary faults but mainly occurs along a single master fault. The finite width of a BOT results from slip transfer through time with locking of early faults, not from a permanent distribution of deformation over a wide area. Because of fault interaction, the stress field geometry within the BOTs is more complex than that along classical oceanic transforms and includes stress deflections close to but also away from the major faults. Application of this modeling to the 100 km wide Tjörnes Fracture Zone (TFZ) in North Iceland, a major BOT of the Mid-Atlantic Ridge that includes three main faults, suggests that the Dalvik Fault and the Husavik-Flatey Fault developed first, the Grismsey Fault being the latest active structure. Since initiation of the TFZ, the Husavik-Flatey Fault accommodated most of the plate motion and probably persists until now as the main plate structure.

  10. Large-scale modeling of reactive solute transport in fracture zones of granitic bedrocks

    Science.gov (United States)

    Molinero, Jorge; Samper, Javier

    2006-01-01

    Final disposal of high-level radioactive waste in deep repositories located in fractured granite formations is being considered by several countries. The assessment of the safety of such repositories requires using numerical models of groundwater flow, solute transport and chemical processes. These models are being developed from data and knowledge gained from in situ experiments such as the Redox Zone Experiment carried out at the underground laboratory of Äspö in Sweden. This experiment aimed at evaluating the effects of the construction of the access tunnel on the hydrogeological and hydrochemical conditions of a fracture zone intersected by the tunnel. Most chemical species showed dilution trends except for bicarbonate and sulphate which unexpectedly increased with time. Molinero and Samper [Molinero, J. and Samper, J. Groundwater flow and solute transport in fracture zones: an improved model for a large-scale field experiment at Äspö (Sweden). J. Hydraul. Res., 42, Extra Issue, 157-172] presented a two-dimensional water flow and solute transport finite element model which reproduced measured drawdowns and dilution curves of conservative species. Here we extend their model by using a reactive transport which accounts for aqueous complexation, acid-base, redox processes, dissolution-precipitation of calcite, quartz, hematite and pyrite, and cation exchange between Na + and Ca 2+. The model provides field-scale estimates of cation exchange capacity of the fracture zone and redox potential of groundwater recharge. It serves also to identify the mineral phases controlling the solubility of iron. In addition, the model is useful to test the relevance of several geochemical processes. Model results rule out calcite dissolution as the process causing the increase in bicarbonate concentration and reject the following possible sources of sulphate: (1) pyrite dissolution, (2) leaching of alkaline sulphate-rich waters from a nearby rock landfill and (3) dissolution of

  11. Tsunami potential assessment based on rupture zones, focal mechanisms and repeat times of strong earthquakes in the major Atlantic-Mediterranean seismic fracture zone

    Science.gov (United States)

    Agalos, Apostolos; Papadopoulos, Gerassimos A.; Kijko, Andrzej; Papageorgiou, Antonia; Smit, Ansie; Triantafyllou, Ioanna

    2016-04-01

    In the major Atlantic-Mediterranean seismic fracture zone, extended from Azores islands in the west to the easternmost Mediterranean Sea in the east, including the Marmara and Black Seas, a number of 22 tsunamigenic zones have been determined from historical and instrumental tsunami documentation. Although some tsunamis were produced by volcanic activity or landslides, the majority of them was generated by strong earthquakes. Since the generation of seismic tsunamis depends on several factors, like the earthquake size, focal depth and focal mechanism, the study of such parameters is of particular importance for the assessment of the potential for the generation of future tsunamis. However, one may not rule out the possibility for tsunami generation in areas outside of the 22 zones determined so far. For the Atlantic-Mediterranean seismic fracture zone we have compiled a catalogue of strong, potentially tsunamigenic (focal depth less than 100 km) historical earthquakes from various data bases and other sources. The lateral areas of rupture zones of these earthquakes were determined. Rupture zone is the area where the strain after the earthquake has dropped substantially with respect the strain before the earthquake. Aftershock areas were assumed to determine areas of rupture zones for instrumental earthquakes. For historical earthquakes macroseismic criteria were used such as spots of higher-degree seismic intensity and of important ground failures. For the period of instrumental seismicity, focal mechanism solutions from CMT, EMMA and other data bases were selected for strong earthquakes. From the geographical distribution of seismic rupture zones and the corresponding focal mechanisms in the entire Atlantic-Mediterranean seismic fracture zone we determined potentially tsunamigenic zones regardless they are known to have produced seismic tsunamis in the past or not. An attempt has been made to calculate in each one of such zones the repeat times of strong

  12. Cementing challenge in low fracture gradient zones in the San Jorge Basin Comodoro Rivadavia - Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Castellanos, Mercedes [Pan American Energy (Argentina); Quevedo, Manuel; Lopez, Rodrigo [Halliburton Argentina SA, Buenos Aires (Argentina)

    2008-07-01

    It is a challenge to achieve higher columns of cement to isolate low fracture gradient zones where the pore pressure has decreased. In addition, it is necessary to maintain the integrity of wells by isolating freshwater zones. This prevents fluid migration to surface and maintains the integrity of casing-cement and cement-formation bonds to prevent future corrosion. Cementing to the surface in a single-stage operation is the preferred method because it eliminates the risk of leakage from a stage tool and the possibility of insufficient linear and radial coverage by a top job. Primary cementing is a practical business investment because this can reduce the need for remedial cementing operations during the life of the well. After a technical-economic evaluation of the cement slurries, the use of lighter density cement preserving API properties is recommended to isolate the productive formations containing oil and gas. (author)

  13. Water, oceanic fracture zones and the lubrication of subducting plate boundaries—insights from seismicity

    Science.gov (United States)

    Schlaphorst, David; Kendall, J.-Michael; Collier, Jenny S.; Verdon, James P.; Blundy, Jon; Baptie, Brian; Latchman, Joan L.; Massin, Frederic; Bouin, Marie-Paule

    2016-03-01

    We investigate the relationship between subduction processes and related seismicity for the Lesser Antilles Arc using the Gutenberg-Richter law. This power law describes the earthquake-magnitude distribution, with the gradient of the cumulative magnitude distribution being commonly known as the b-value. The Lesser Antilles Arc was chosen because of its along-strike variability in sediment subduction and the transition from subduction to strike-slip movement towards its northern and southern ends. The data are derived from the seismicity catalogues from the Seismic Research Centre of The University of the West Indies and the Observatoires Volcanologiques et Sismologiques of the Institut de Physique du Globe de Paris and consist of subcrustal events primarily from the slab interface. The b-value is found using a Kolmogorov-Smirnov test for a maximum-likelihood straight line-fitting routine. We investigate spatial variations in b-values using a grid-search with circular cells as well as an along-arc projection. Tests with different algorithms and the two independent earthquake cataloges provide confidence in the robustness of our results. We observe a strong spatial variability of the b-value that cannot be explained by the uncertainties. Rather than obtaining a simple north-south b-value distribution suggestive of the dominant control on earthquake triggering being water released from the sedimentary cover on the incoming American Plates, or a b-value distribution that correlates with on the obliquity of subduction, we obtain a series of discrete, high b-value `bull's-eyes' along strike. These bull's-eyes, which indicate stress release through a higher fraction of small earthquakes, coincide with the locations of known incoming oceanic fracture zones on the American Plates. We interpret the results in terms of water being delivered to the Lesser Antilles subduction zone in the vicinity of fracture zones providing lubrication and thus changing the character of the

  14. Site descriptive modelling Forsmark, stage 2.2. A fracture domain concept as a basis for the statistical modelling of fractures and minor deformation zones, and interdisciplinary coordination

    Energy Technology Data Exchange (ETDEWEB)

    Olofsson, Isabelle; Simeonov, Assen [Swedish Nuclear Fuel and Waste Manageme nt Co., Stockholm (Sweden); Stephens, Michael [Geological Survey of Sweden (SGU), U ppsala (Sweden); Follin, Sven [SF GeoLogic AB, Taeby (Sweden); Nilsson, Ann-Chatrin [G eosigma AB, Uppsala (Sweden); Roeshoff, Kennert; Lindberg, Ulrika; Lanaro, Flavio [Bergbygg konsult AB, Haesselby (Sweden); Fredriksson, Anders; Persson, Lars [Golder Associat es AB (Sweden)

    2007-04-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, Forsmark and Simpevarp/Laxemar, with the objective of siting a final waste repository at depth for spent nuclear fuel. The programme is built upon the development of site descriptive models after each data freeze. This report describes the first attempt to define fracture domains for the Forsmark site modelling in stage 2.2. Already during model version 1.2 at Forsmark, significant spatial variability in the fracture pattern was observed. The variability appeared to be so significant that it provoked the need for a subdivision of the model volume for the treatment of geological and hydrogeological data into sub-volumes. Subsequent analyses of data collected up to data freeze 2.1 led to a better understanding of the site and a concept for the definition of fracture domains based on geological characteristics matured. The main objectives of this report are to identify and describe fracture domains at the site on the basis of geological data and to compile hydrogeological, hydrogeochemical and rock mechanics data within each fracture domain and address the implications of this integration activity. On the basis of borehole data, six fracture domains (FFM01-FFM06) have been recognized inside and immediately around the candidate volume. Three of these domains (FFM01, FFM02 and FFM06) lie inside the target volume for a potential repository in the northwestern part of the candidate area, and need to be addressed in the geological DFN modelling work. The hydrogeological data support the subdivision of the bedrock into fracture domains FFM01, FFM02 and FFM03. Few or no data are available for the other three domains. The hydrogeochemical data also support the subdivision into fracture domains FFM01 and FFM02. Since few data are available from the bedrock between deformation zones inside FFM03, there is little information on the hydrogeochemical

  15. Ability of High-Resolution Resistivity Tomography to Detect Fault and Fracture Zones: Application to the Tournemire Experimental Platform, France

    Science.gov (United States)

    Gélis, C.; Noble, M.; Cabrera, J.; Penz, S.; Chauris, H.; Cushing, E. M.

    2016-02-01

    The Experimental Platform of Tournemire (Aveyron, France) developed by IRSN (French Institute for Radiological Protection and Nuclear Safety) is composed of a tunnel excavated in an argillite formation belonging to a limestone-argillite-limestone subhorizontal sedimentary sequence. Subvertical secondary fault zones were intercepted in argillite using drifts and boreholes in the tunnel excavated at a depth of about 250 m located under the Larzac Plateau. A 2D 2.5 km baseline large-scale electrical resistivity survey conducted in 2007 allowed detecting in the upper limestones several significantly low electrical resistivity subvertical zones (G élis et al. Appl Geophys 167(11): 1405-1418, 2010). One of these discontinuities is consistent with the extension towards the surface of the secondary fault zones identified in the argillite formation from the tunnel. In an attempt to better characterize this zone, IRSN and MINES ParisTech conducted a high-resolution electrical resistivity survey located transversally to the fault and fracture zones. A 760-m-long profile was acquired using two array geometries and take-outs of 2, 4 and 8 m, requiring several roll-alongs. These data were first inverted independently for each take-out and then using all take-outs together for a given array geometry. Different inverted 2D electrical resistivity models display the same global features with high (higher than 5000 Ωm) to low (lower than 100 Ωm) electrical resistivity zones. These electrical resistivity models are finally compared with a geological cross-section based on independent data. The subvertical conductive zones are in agreement with the fault and fracture locations inferred from the geological cross-section. Moreover, the top of a more conductive zone, below a high electrical conductive zone and between two subvertical fault zones, is located in a more sandy and argillaceous layer. This conductive zone is interpreted as the presence of a more scattered fracture zone

  16. Preferential flow, diffuse flow, and perching in an interbedded fractured-rock unsaturated zone

    Science.gov (United States)

    Nimmo, John R.; Creasey, Kaitlyn M.; Perkins, Kim S.; Mirus, Benjamin B.

    2016-11-01

    Layers of strong geologic contrast within the unsaturated zone can control recharge and contaminant transport to underlying aquifers. Slow diffuse flow in certain geologic layers, and rapid preferential flow in others, complicates the prediction of vertical and lateral fluxes. A simple model is presented, designed to use limited geological site information to predict these critical subsurface processes in response to a sustained infiltration source. The model is developed and tested using site-specific information from the Idaho National Laboratory in the Eastern Snake River Plain (ESRP), USA, where there are natural and anthropogenic sources of high-volume infiltration from floods, spills, leaks, wastewater disposal, retention ponds, and hydrologic field experiments. The thick unsaturated zone overlying the ESRP aquifer is a good example of a sharply stratified unsaturated zone. Sedimentary interbeds are interspersed between massive and fractured basalt units. The combination of surficial sediments, basalts, and interbeds determines the water fluxes through the variably saturated subsurface. Interbeds are generally less conductive, sometimes causing perched water to collect above them. The model successfully predicts the volume and extent of perching and approximates vertical travel times during events that generate high fluxes from the land surface. These developments are applicable to sites having a thick, geologically complex unsaturated zone of substantial thickness in which preferential and diffuse flow, and perching of percolated water, are important to contaminant transport or aquifer recharge.

  17. Preferential flow, diffuse flow, and perching in an interbedded fractured-rock unsaturated zone

    Science.gov (United States)

    Nimmo, John R.; Creasey, Kaitlyn M; Perkins, Kimberlie; Mirus, Benjamin B.

    2017-01-01

    Layers of strong geologic contrast within the unsaturated zone can control recharge and contaminant transport to underlying aquifers. Slow diffuse flow in certain geologic layers, and rapid preferential flow in others, complicates the prediction of vertical and lateral fluxes. A simple model is presented, designed to use limited geological site information to predict these critical subsurface processes in response to a sustained infiltration source. The model is developed and tested using site-specific information from the Idaho National Laboratory in the Eastern Snake River Plain (ESRP), USA, where there are natural and anthropogenic sources of high-volume infiltration from floods, spills, leaks, wastewater disposal, retention ponds, and hydrologic field experiments. The thick unsaturated zone overlying the ESRP aquifer is a good example of a sharply stratified unsaturated zone. Sedimentary interbeds are interspersed between massive and fractured basalt units. The combination of surficial sediments, basalts, and interbeds determines the water fluxes through the variably saturated subsurface. Interbeds are generally less conductive, sometimes causing perched water to collect above them. The model successfully predicts the volume and extent of perching and approximates vertical travel times during events that generate high fluxes from the land surface. These developments are applicable to sites having a thick, geologically complex unsaturated zone of substantial thickness in which preferential and diffuse flow, and perching of percolated water, are important to contaminant transport or aquifer recharge.

  18. Preferential flow, diffuse flow, and perching in an interbedded fractured-rock unsaturated zone

    Science.gov (United States)

    Nimmo, John R.; Creasey, Kaitlyn M.; Perkins, Kim S.; Mirus, Benjamin B.

    2017-03-01

    Layers of strong geologic contrast within the unsaturated zone can control recharge and contaminant transport to underlying aquifers. Slow diffuse flow in certain geologic layers, and rapid preferential flow in others, complicates the prediction of vertical and lateral fluxes. A simple model is presented, designed to use limited geological site information to predict these critical subsurface processes in response to a sustained infiltration source. The model is developed and tested using site-specific information from the Idaho National Laboratory in the Eastern Snake River Plain (ESRP), USA, where there are natural and anthropogenic sources of high-volume infiltration from floods, spills, leaks, wastewater disposal, retention ponds, and hydrologic field experiments. The thick unsaturated zone overlying the ESRP aquifer is a good example of a sharply stratified unsaturated zone. Sedimentary interbeds are interspersed between massive and fractured basalt units. The combination of surficial sediments, basalts, and interbeds determines the water fluxes through the variably saturated subsurface. Interbeds are generally less conductive, sometimes causing perched water to collect above them. The model successfully predicts the volume and extent of perching and approximates vertical travel times during events that generate high fluxes from the land surface. These developments are applicable to sites having a thick, geologically complex unsaturated zone of substantial thickness in which preferential and diffuse flow, and perching of percolated water, are important to contaminant transport or aquifer recharge.

  19. Modeling the Ductile Brittle Fracture Transition in Reactor Pressure Vessel Steels using a Cohesive Zone Model based approach

    Energy Technology Data Exchange (ETDEWEB)

    Pritam Chakraborty; S. Bulent Biner

    2013-10-01

    Fracture properties of Reactor Pressure Vessel (RPV) steels show large variations with changes in temperature and irradiation levels. Brittle behavior is observed at lower temperatures and/or higher irradiation levels whereas ductile mode of failure is predominant at higher temperatures and/or lower irradiation levels. In addition to such temperature and radiation dependent fracture behavior, significant scatter in fracture toughness has also been observed. As a consequence of such variability in fracture behavior, accurate estimates of fracture properties of RPV steels are of utmost importance for safe and reliable operation of reactor pressure vessels. A cohesive zone based approach is being pursued in the present study where an attempt is made to obtain a unified law capturing both stable crack growth (ductile fracture) and unstable failure (cleavage fracture). The parameters of the constitutive model are dependent on both temperature and failure probability. The effect of irradiation has not been considered in the present study. The use of such a cohesive zone based approach would allow the modeling of explicit crack growth at both stable and unstable regimes of fracture. Also it would provide the possibility to incorporate more physical lower length scale models to predict DBT. Such a multi-scale approach would significantly improve the predictive capabilities of the model, which is still largely empirical.

  20. Diffuse-flow hydrothermal field in an oceanic fracture zone setting, Northeast Pacific: Deposit composition

    Science.gov (United States)

    Hein, J.R.; Koski, R.A.; Embley, R.W.; Reid, J.; Chang, S.-W.

    1999-01-01

    This is the first reported occurrence of an active hydrothermal field in an oceanic fracture zone setting. The hydrothermal field occurs in a pull-apart basin within the Blanco Fracture Zone (BFZ), which has four distinct mineral deposit types: (1) barite mounds and chimneys, (2) barite stockwork breccia, (3) silica-barite beds, and (4) silica, barite, and Fe-Mn oxyhydroxide in sediments. All deposit types contain minor amounts of sulfides. In barite stockwork, silica-barite beds, and mineralized sediment, Ba, Ph, Ag, S, Au, Zn, Cu, Hg, TI, As, Mo, Sb, U, Cd, and Cu are enriched relative to unmineralized rocks and sediments of the BFZ. Fe and Mn are not enriched in the barite stockwork or silica-barite beds, but along with P, Co, and Mg are enriched in the mineralized sediments. Silver contents in deposits of the hydrothermal field range up to 86 ppm, gold to 0.7 ppm, zinc to 3.2%, copper to 0.8%, and barium to 22%. Mineralization occurred by diffuse, low to intermediate temperature (mostly Metallurgy and Petroleum. All rights reserved.

  1. Groundwater protection in fractured media: a vulnerability-based approach for delineating protection zones in Switzerland

    Science.gov (United States)

    Pochon, Alain; Tripet, Jean-Pierre; Kozel, Ronald; Meylan, Benjamin; Sinreich, Michael; Zwahlen, François

    2008-11-01

    A vulnerability-based approach for delineating groundwater protection zones around springs in fractured media has been developed to implement Swiss water-protection regulations. It takes into consideration the diversity of hydrogeological conditions observed in fractured aquifers and provides individual solutions for each type of setting. A decision process allows for selecting one of three methods, depending on the spring vulnerability and the heterogeneity of the aquifer. At the first stage, an evaluation of spring vulnerability is required, which is essentially based on spring hydrographs and groundwater quality monitoring. In case of a low vulnerability of the spring, a simplified method using a fixed radius approach (“distance method”) is applied. For vulnerable springs, additional investigations must be completed during a second stage to better characterize the aquifer properties, especially in terms of heterogeneity. This second stage includes a detailed hydrogeological survey and tracer testing. If the aquifer is assessed as slightly heterogeneous, the delineation of protection zones is performed using a calculated radius approach based on tracer test results (“isochrone method”). If the heterogeneity is high, a groundwater vulnerability mapping method is applied (“DISCO method”), based on evaluating discontinuities, protective cover and runoff parameters. Each method is illustrated by a case study.

  2. Geoid height-age relation from Seasat altimeter profiles across the Mendocino Fracture Zone

    Science.gov (United States)

    Sandwell, D. T.; Schubert, G.

    1982-01-01

    Twenty-eight Seasat altimeter profiles crossing the Mendocino Fracture Zone are used together with seafloor ages determined from magnetic lineations to estimate the change in oceanic geoid height with age, between ages of 15 and 135 m.y. An unbiased estimate of the overall geoid offset along each profile is determined from a least-squares fit of the along-track derivative of the geoid to the geoid slope predicted from a simple two-layer gravitational edge effect model. Uncertainties based upon the statistical properties of each profile are also determined. A geoid slope-age relation is constructed by normalizing the geoid offsets and uncertainties by the age offsets. The results are in agreement with geoid slope-age relations determined from symmetrically spreading ridges (Sandwell and Schubert, 1980). However, the fracture zone estimates have smaller uncertainties and show less scatter. A comparison of these results with the geoid slope-age prediction of the boundary layer cooling model shows that the thermal structure begins to deviate from this model at an early age (20-40 m.y.). A plate cooling model with a thickness of 125 km is most compatible with the geoid slope-age estimates, although significant deviations occur; these may indicate that the lithospheric thermal structure is not entirely age dependent.

  3. Application of zipper-fracturing of horizontal cluster wells in the Changning shale gas pilot zone, Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Bin Qian

    2015-03-01

    Full Text Available After several years of exploration practices in the Changning-Weiyuan national shale gas pilot zone, the industrial production has been achieved in a number of vertical and horizontal wells completed by SRV fracturing, and a series of independent shale gas reservoir stimulation technologies have come into being. Next, it is necessary to consider how to enhance the efficiency of fracturing by a factory-mode operation. This paper presents the deployment of Changning Well Pad A, the first cluster horizontal shale gas well group, and proposes the optimal design for the factory operation mode of this Pad according to the requirements of wellpad fracturing stimulation technologies and the mountainous landform in the Sichuan Basin. Accordingly, a zipper-fracturing mode was firstly adopted in the factory fracturing on wellpad. With the application of standardized field process, zipper operation, assembly line work, staggered placement of downhole fractures, and microseismic monitoring in real time, the speed of fracturing reached 3.16 stages a day on average, and the stimulated reservoir volume was maximized, which has fully revealed how the factory operation mode contributes to the large-scale SRV fracturing of horizontal shale gas cluster wells on wellpads in the aspect of speed and efficiency. Moreover, the fracturing process, operation mode, surface facilities and post-fracturing preliminary evaluation of the zipper-fracturing in the well group were examined comprehensively. It is concluded from the practice that the zipper-fracturing in the two wells enhanced the efficiency by 78% and stimulated reservoir volume by 50% compared with the single-well fracturing at the preliminary stage in this area.

  4. Operative Treatment of Fifth Metatarsal Jones Fractures (Zones II and III) in the NBA.

    Science.gov (United States)

    O'Malley, Martin; DeSandis, Bridget; Allen, Answorth; Levitsky, Matthew; O'Malley, Quinn; Williams, Riley

    2016-05-01

    Proximal fractures of the fifth metatarsal (zone II and III) are common in the elite athlete and can be difficult to treat because of a tendency toward delayed union, nonunion, or refracture. The purpose of this case series was to report our experience in treating 10 NBA players, determine the healing rate, return to play, refracture rate, and role of foot type in these athletes. The records of 10 professional basketball players were retrospectively reviewed. Seven athletes underwent standard percutaneous internal fixation with bone marrow aspirate concentrate (BMAC) whereas the other 3 had open bone grafting primarily in addition to fixation and BMAC. Radiographic features evaluated included fourth-fifth intermetatarsal, fifth metatarsal lateral deviation, calcaneal pitch, and metatarsus adductus angles. Radiographic healing was observed at an overall average of 7.5 weeks and return to play was 9.8 weeks. Three athletes experienced refractures. There were no significant differences in clinical features or radiographic measurements except that the refracture group had the highest metatatarsus adductus angles. Most athletes were pes planus and 9 of 10 had a bony prominence under the fifth metatarsal styloid. This is the largest published series of operatively treated professional basketball players who exemplify a specific patient population at high risk for fifth metatarsal fracture. These players were large and possessed a unique foot type that seemed to be associated with increased risk of fifth metatarsal fracture and refracture. This foot type had forefoot metatarsus adductus and a fifth metatarsal that was curved with a prominent base. We continue to use standard internal fixation with bone marrow aspirate but advocate additional prophylactic open bone grafting in patients with high fourth-to-fifth intermetatarsal, fifth metatarsal lateral deviation, and metatarsus adductus angles as well as prominent fifth metatarsal styloids in order to improve fracture

  5. Conceptual Model of the Geometry and Physics of Water Flow in a Fractured Basalt Vadose Zone: Box Canyon Site, Idaho

    Energy Technology Data Exchange (ETDEWEB)

    Faybishenko, Boris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Doughty, Christine [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Steiger, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Long, Jane C.S. [Univ. of Nevada, Reno, NV (US). Mackay School of Mines; Wood, Tom [Parsons Engineering, Inc., Idaho Falls, ID (United States); Jacobsen, Janet [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lore, Jason [Stanford Univ., CA (United States); Zawislanski, Peter T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    1999-03-01

    A conceptual model of the geometry and physics of water flow in a fractured basalt vadose zone was developed based on the results of lithological studies and a series of ponded infiltration tests conducted at the Box Canyon site near the Idaho National Engineering and Environmental Laboratory (INEEL) in Idaho. The infiltration tests included one two-week test in 1996, three two-day tests in 1997, and one four-day test in 1997. For the various tests, initial infiltration rates ranged from 4.1 cm/day to 17.7 cm/day and then decreased with time, presumably due to mechanical or microbiological clogging of fractures and vesicularbasalt in the near-surface zone, as well as the effect of entrapped air. The subsurface moisture redistribution was monitored with tensiometers, neutron logging, time domain reflectrometry and ground penetrating radar. A conservative tracer, potassium bromide, was added to the pond water at a concentration of 3 g/L to monitor water flow with electrical resistivity probes and water sampling. Analysis of the data showed evidence of preferential flow rather than the propagation of a uniform wetting front. We propose a conceptual model describing the saturation-desaturation behavior of the basalt, in which rapid preferential flow through vertical column-bounding fractures occurs from the surface to the base of the basalt flow. After the rapid wetting of column-bounding fractures, a gradual wetting of other fractures and the basalt matrix occurs. Fractures that are saturated early in the tests may become desaturated thereafter, which we attribute to the redistribution of water between fractures and matrix. Lateral movement of water was also observed within a horizontal central fracture zone and rubble zone, which could have important implications for contaminant accumulation at contaminated sites.

  6. Lost in Iceland? Fracture Zone Complications Along the Mid-Atlantic Plate Boundary

    Science.gov (United States)

    Brandsdóttir, B.; Einarsson, P.; Detrick, R. S.; Mayer, L.; Calder, B.; Driscoll, N.; Richter, B.

    2003-12-01

    The mid-Atlantic plate boundary breaks up into a series of segments across Iceland. Two transform zones, the South Iceland Seismic Zone (SISZ) and the Tjörnes Fracture Zone (TFZ) separate the on land rift zones from the Reykjanes Ridge (RR), and the Kolbeinsey Ridge (KR), offshore N-Iceland. Both are markedly different from fracture zones elsewhere along the plate boundary. The 80 km E-W and 10--15 km N-S SISZ is made up of more than 20 N-S aligned, right-lateral, strike-slip faults whereas the TFZ consists of a broad zone of deformation, roughly 150 km E-W and 75 km N-S. The over-all left-lateral transform motion within the SISZ is accommodated by bookshelf faulting whereas the right-lateral transform motion within the TFZ is incorporated within two WNW-trending seismic zones, spaced ˜40 km apart, the Grímsey Seismic Zone (GSZ) and the Húsavík-Flatey fault (HFF). Recently collected EM300 and RESON8101 multibeam bathymetric data along with CHIRP subbottom data has unveiled some tectonic details within the TFZ. The GSZ runs along the offshore extension of the Northern Volcanic Rift Zone (NVRZ) and is made up of four left-stepping, en-echelon, NS-striking rift segments akin to those on land. Large GSZ earthquakes seem to be associated with lateral strike-slip faulting along ESE-striking fault planes. Fissure swarms transecting the offshore volcanic systems have also been subjected to right-lateral transformation along the spreading direction. As the Reykjanes Peninsula, the on land extension of the RR, the GSZ bears the characteristics of an oblique rift zone. The plate boundary segments connecting to the RR and KR are thus symmetrical with respect to the plate separation vector (105° ) and orientation of individual volcanic systems. The HFF has an overall strike of N65° W and can be traced continuously along its 75--80 km length, between the Theistareykir volcanic system within the NVRZ, across the central TFZ-graben, the Skjálfandi bay, and into the largest

  7. Cohesive zone laws for void growth — II. Numerical field projection of elasto-plastic fracture processes with vapor pressure

    Science.gov (United States)

    Chew, Huck Beng; Hong, Soonsung; Kim, Kyung-Suk

    2009-08-01

    Modeling ductile fracture processes using Gurson-type cell elements has achieved considerable success in recent years. However, incorporating the full mechanisms of void growth and coalescence in cohesive zone laws for ductile fracture still remains an open challenge. In this work, a planar field projection method, combined with equilibrium field regularization, is used to extract crack-tip cohesive zone laws of void growth in an elastic-plastic solid. To this end, a single row of void-containing cell elements is deployed directly ahead of a crack in an elastic-plastic medium subjected to a remote K-field loading; the macroscopic behavior of each cell element is governed by the Gurson porous material relation, extended to incorporate vapor pressure effects. A thin elastic strip surrounding this fracture process zone is introduced, from which the cohesive zone variables can be extracted via the planar field projection method. We show that the material's initial porosity induces a highly convex traction-separation relationship — the cohesive traction reaches the peak almost instantaneously and decreases gradually with void growth, before succumbing to rapid softening during coalescence. The profile of this numerically extracted cohesive zone law is consistent with experimentally determined cohesive zone law in Part I for multiple micro-crazing in HIPS. In the presence of vapor pressure, both the cohesive traction and energy are dramatically lowered; the shape of the cohesive zone law, however, remains highly convex, which suggests that diffusive damage is still the governing failure mechanism.

  8. Magnetic and bathymetric studies in the vicinity of the 73 degree E fracture zone, Central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    KameshRaju, K.A.

    -153 147 Elsevier Science Publishers B.V., Amsterdam Letter Section Magnetic and bathymetric studies in the vicinity of the 73 ° E fracture zone, Central Indian Basin K.A. Kamesh Raju National Institute of Oceanography, Dona Paula-403 004, Goa, India... (Received January 25, 1990; revision accepted August 20, 1990) ABSTRACT Kamesh Raju, K.A., 1990. Magnetic and bathymetric studies in the vicinity of the 73°E fracture zone, Central Indian Basin. Mar. Geol., 95: 147-153. Studies of magnetic data...

  9. Study of tunnelling through water-bearing fracture zones. Baseline study on technical issues with NE-1 as reference

    Energy Technology Data Exchange (ETDEWEB)

    Yanting Chang; Swindell, Robert; Bogdanoff, Ingvar; Lindstroem, Beatrice; Termen, Jens [WSP Sweden, Stockholm (Sweden) ; Starsec, Peter [SGI, Linkoeping (Sweden)

    2005-04-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is responsible for the management of Sweden's nuclear waste. SKB is investigating various designs for the construction of an underground deep repository for spent nuclear fuel at 500-600 m depths. For the construction of an access tunnel for such a deep repository, the possibility of encountering a water-bearing fracture zone cannot be discounted. Such a zone named NE-1 (deformation zone in accordance to SKB's terminology) was encountered during the construction of the Aespoe Hard Rock Laboratory (HRL) and difficulties with large water inflows were reported. With the aim to assess the feasibility of different technical solutions, SKB commissioned a baseline study into the passage of an access tunnel through a water-bearing fracture zone at three different depths (200 m, 400 m and 600 m). The objectives of this baseline study are to: Increase the knowledge of possible technical solutions for tunnelling through water-bearing fractures zones with the characteristics of the brittle deformation zone NE-1 at different depths, namely 200, 400 and 600 metres; Form a reference document to assist the engineering design and construction work for the passage through such a water-bearing fracture zone; To highlight the engineering parameters that should be obtained to facilitate design for the passage through water-bearing fracture zones.The study has been carried out in the following five stages: A. Compilation of the relevant data for deformation zone NE-1; B. Problem identification and proposal of technical solutions; C. Identification of hazards to be involved in the tunnel excavation; D. Recommendations and conclusions for further investigations; E. Documentation of the results in a final report. The analyses will be expressed in statistical/probabilistic terms where appropriate. In order to specify the precondition that will be valid for this study, a descriptive model of the water-bearing fracture zone is

  10. Radiologically hyperdense zones of the patella seem to be partial osteonecroses subsequent to fracture treatment.

    Science.gov (United States)

    Schüttrumpf, Jan Philipp; Behzadi, Cyrus; Balcarek, Peter; Walde, Tim Alexander; Frosch, Stephan; Wachowski, Martin Michael; Stürmer, Klaus Michael; Frosch, Karl-Heinz

    2013-10-01

    assessment, respectively. The clinical outcome of these patients with a hyperdense area on the patella, in this small series, was not shown to be worse than those who demonstrated normal healing. Radiologically hyperdense areas subsequent to patella fracture may represent partial osteonecrosis caused by localized vascular compromise. This was confirmed by MRI and histological examinations in two patients with persistent hyperdense lesions. The clinical outcome of patients with hyperdense zones seems to be poorer than that of patients without such findings, but no statistical difference was shown in this small series. It is possible that earlier surgical treatment and thus a shorter ischemic period as well as tissue-conserving operative techniques could prevent the occurrence of partial necroses. This hypothesis would require further study. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  11. Using earthquake clusters to identify fracture zones at Puna geothermal field, Hawaii

    Science.gov (United States)

    Lucas, A.; Shalev, E.; Malin, P.; Kenedi, C. L.

    2010-12-01

    The actively producing Puna geothermal system (PGS) is located on the Kilauea East Rift Zone (ERZ), which extends out from the active Kilauea volcano on Hawaii. In the Puna area the rift trend is identified as NE-SW from surface expressions of normal faulting with a corresponding strike; at PGS the surface expression offsets in a left step, but no rift perpendicular faulting is observed. An eight station borehole seismic network has been installed in the area of the geothermal system. Since June 2006, a total of 6162 earthquakes have been located close to or inside the geothermal system. The spread of earthquake locations follows the rift trend, but down rift to the NE of PGS almost no earthquakes are observed. Most earthquakes located within the PGS range between 2-3 km depth. Up rift to the SW of PGS the number of events decreases and the depth range increases to 3-4 km. All initial locations used Hypoinverse71 and showed no trends other than the dominant rift parallel. Double difference relocation of all earthquakes, using both catalog and cross-correlation, identified one large cluster but could not conclusively identify trends within the cluster. A large number of earthquake waveforms showed identifiable shear wave splitting. For five stations out of the six where shear wave splitting was observed, the dominant polarization direction was rift parallel. Two of the five stations also showed a smaller rift perpendicular signal. The sixth station (located close to the area of the rift offset) displayed a N-S polarization, approximately halfway between rift parallel and perpendicular. The shear wave splitting time delays indicate that fracture density is higher at the PGS compared to the surrounding ERZ. Correlation co-efficient clustering with independent P and S wave windows was used to identify clusters based on similar earthquake waveforms. In total, 40 localized clusters containing ten or more events were identified. The largest cluster was located in the

  12. Microstructure and Fracture Morphology in the Welding Zone of T91 Heat-resisting Steel Used in Power Station

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Microstructure performance in the welding zone of T91 heat-resistant steel under the condition of TIG welding wasresearched by means of metallography, X-ray diffraction and scanning electron microscope (SEM). Experimentalresults indicated that microstructure of T91 weld metal was austenite + a little amount of δ ferrite when using TGS-9cb filler wire. Substructure inside the austenite grain was crypto-crystal lath martensite, on which some Cr23C6blocky carbides were distributed. The maximum hardness (HRC44) in the welding zone is near the fusion zone. Thereexisted no obvious softening zone in the heat-affected zone (HAZ). For T91 steel tube of φ63 mmx5 mm, whenincreasing welding heat input (E) from 4.8 kJ/cm to 12.5 kJ/cm, fracture morphology in the fusion zone and theHAZ changed from dimple fracture into quasi-cleavage fracture (QC). Controlling the welding heat input of about9.8 kJ/cm is suitable in the welding of T91 heat-resistant steel.

  13. Rapid Geophysical Surveyor. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Roybal, L.G.; Carpenter, G.S.; Josten, N.E.

    1993-01-01

    The Rapid Geophysical Surveyor (RGS) is a system designed to rapidly and economically collect closely-spaced geophysical data used for characterization of US Department of Energy waste sites. Geophysical surveys of waste sites are an important first step in the remediation and closure of these sites; especially older sites where historical records are inaccurate and survey benchmarks have changed because of refinements in coordinate controls and datum changes. Closely-spaced data are required to adequately differentiate pits, trenches, and soil vault rows whose edges may be only a few feet from each other. A prototype vehicle designed to collect magnetic field data was built at the Idaho National Engineering Laboratory (INEL) during the summer of 1992. The RGS was funded by the Buried Waste Integrated Demonstration program. This vehicle was demonstrated at the Subsurface Disposal Area (SDA) within the Radioactive Waste Management Complex at the INEL in September 1992. Magnetic data were collected over two areas in the SDA, with a total survey area of about 1.7 acres. Data were collected at a nominal density of 2{1/2} in. along survey lines spaced 1-ft apart. Over 350,000 data points were collected over a 6 day period corresponding to about 185 worker-days using conventional ground survey techniques.

  14. Subduction of the Tehuantepec oceanic fracture zone and the relationship with a seismic gap in southern Mexico

    Science.gov (United States)

    Constantin Manea, Vlad; Manea, Marina; Taras, Gerya; Valenzuela, Raul W.

    2016-04-01

    It is accepted that key constraints on the size and recurrence time of large subduction earthquakes originate from the degree of locking between the subducting and overriding plates. Since the interseismic locking degree is influenced by the rheological properties of crustal and mantle rocks, any variations along strike will result in significant changes in seismic behavior due to a change in frictional stability. Additionally, recent seismic studies show that the subduction of hydrothermally altered oceanic fracture zones induces strong pore-fluid pressure variations that control the degree of interseismic locking. The Mexico Subduction Zone (MSZ) is characterized by major along-strike changes in subduction geometry, as well as important structural variations of the incoming oceanic plate. One of the main tectonic features of the Cocos plate is the Tehuantepec fracture zone (FZ) that is currently subducting beneath southern Mexico. The analysis of seismicity revealed that the area around where Tehuantepec fracture zone is currently subducting is conspicuously quiet and considered a seismic gap. Here, no significant quake (Ms ≥ 7.0) has occurred in more than 100 years, and the origin of Tehuantepec Seismic Gap (TSG) has not been elucidated yet. Based on the dimensions of the Tehuantepec gap (125 km length and 80 km width), an earthquake of Mw = 8.0 may be possible. This study aims to shed some light on the relationship between the TSG with the subduction of Tehuantepec oceanic fracture zone. Previous studies show that the uppermost oceanic lithosphere beneath the Tehuantepec FZ is partially serpentinized due to seawater infiltrations along faults. Using high-resolution three-dimensional coupled petrological-thermomechanical numerical simulations specifically tailored for the subduction of the Tehuantepec FZ at MSZ we show that the weakened serpentinized fracture zone is partially scraped out in the forearc region because of its low strength and positive buoyancy

  15. Spatial distribution of jet fuel in the vadoze zone of a heterogeneous and fractured soil.

    Science.gov (United States)

    Tzovolou, D N; Benoit, Y; Haeseler, F; Klint, K E; Tsakiroglou, C D

    2009-04-01

    The goal of the present work is to screen and evaluate all available data before selecting and testing remediation technologies on heterogeneous soils polluted by jet fuel. The migration pathways of non-aqueous phase liquids (NAPLs) in the subsurface relate closely with soil properties. A case study is performed on the vadoze zone of a military airport of north-west Poland contaminated by jet fuel. Soil samples are collected from various depths of two cells, and on-site and off-site chemical analyses of hydrocarbons are conducted by using Pollut Eval apparatus and GC-MS, respectively. The geological conceptual model of the site along with microscopic and hydraulic properties of the porous matrix and fractures enable us to interpret the non-uniform spatial distribution of jet fuel constituents. The total concentration of the jet fuel and its main hydrocarbon families (n-paraffins, major aromatics) over the two cells is governed by the slow preferential flow of NAPL through the porous matrix, the rapid NAPL convective flow through vertical desiccation and sub-horizontal glaciotectonic fractures, and n-paraffin biodegradation in upper layers where the rates of oxygen transfer is not limited by complexities of the pore structure. The information collected is valuable for the selection, implementation and evaluation of two in situ remediation methods.

  16. The micro-damage process zone during transverse cortical bone fracture: No ears at crack growth initiation.

    Science.gov (United States)

    Willett, Thomas; Josey, David; Lu, Rick Xing Ze; Minhas, Gagan; Montesano, John

    2017-10-01

    Apply high-resolution benchtop micro-computed tomography (micro-CT) to gain greater understanding and knowledge of the formation of the micro-damage process zone formed during traverse fracture of cortical bone. Bovine cortical bone was cut into single edge notch (bending) fracture testing specimens with the crack on the transverse plane and oriented to grow in the circumferential direction. We used a multi-specimen technique and deformed the specimens to various individual secant modulus loss levels (P-values) up to and including maximum load (Pmax). Next, the specimens were infiltrated with a BaSO4 precipitation stain and scanned at 3.57-μm isotropic voxel size using a benchtop high resolution-micro-CT. Measurements of the micro-damage process zone volume, width and height were made. These were compared with the simple Irwin's process zone model and with finite element models. Electron and confocal microscopy confirmed the formation of BaSO4 precipitate in micro-cracks and other porosity, and an interesting novel mechanism similar to tunneling. Measurable micro-damage was detected at low P values and the volume of the process zone increased according to a second order polynomial trend. Both width and height grew linearly up to Pmax, at which point the process zone cross-section (perpendicular to the plane of the crack) was almost circular on average with a radius of approximately 550µm (approximately one quarter of the unbroken ligament thickness) and corresponding to the shape expected for a biological composite under plane stress conditions. This study reports details of the micro-damage fracture process zone previously unreported for cortical bone. High-resolution micro-CT enables 3D visualization and measurement of the process zone and confirmation that the crack front edge and process zone are affected by microstructure. It is clear that the process zone for the specimens studied grows to be meaningfully large, confirming the need for the J

  17. Propagation of uncertainties for an evaluation of the Azores-Gibraltar Fracture Zone tsunamigenic potential

    Science.gov (United States)

    Antoshchenkova, Ekaterina; Imbert, David; Richet, Yann; Bardet, Lise; Duluc, Claire-Marie; Rebour, Vincent; Gailler, Audrey; Hébert, Hélène

    2016-04-01

    The aim of this study is to assess evaluation the tsunamigenic potential of the Azores-Gibraltar Fracture Zone (AGFZ). This work is part of the French project TANDEM (Tsunamis in the Atlantic and English ChaNnel: Definition of the Effects through numerical Modeling; www-tandem.cea.fr), special attention is paid to French Atlantic coasts. Structurally, the AGFZ region is complex and not well understood. However, a lot of its faults produce earthquakes with significant vertical slip, of a type that can result in tsunami. We use the major tsunami event of the AGFZ on purpose to have a regional estimation of the tsunamigenic potential of this zone. The major reported event for this zone is the 1755 Lisbon event. There are large uncertainties concerning source location and focal mechanism of this earthquake. Hence, simple deterministic approach is not sufficient to cover on the one side the whole AGFZ with its geological complexity and on the other side the lack of information concerning the 1755 Lisbon tsunami. A parametric modeling environment Promethée (promethee.irsn.org/doku.php) was coupled to tsunami simulation software based on shallow water equations with the aim of propagation of uncertainties. Such a statistic point of view allows us to work with multiple hypotheses simultaneously. In our work we introduce the seismic source parameters in a form of distributions, thus giving a data base of thousands of tsunami scenarios and tsunami wave height distributions. Exploring our tsunami scenarios data base we present preliminary results for France. Tsunami wave heights (within one standard deviation of the mean) can be about 0.5 m - 1 m for the Atlantic coast and approaching 0.3 m for the English Channel.

  18. Geophysical investigation of seamounts near the Ogasawara fracture zone, western Pacific

    Science.gov (United States)

    Lee, T.-G.; Lee, Kenneth; Hein, J.R.; Moon, J.-W.

    2009-01-01

    This paper provides an analysis of multi-channel seismic data obtained during 2000-2001 on seamounts near the Ogasawara Fracture Zone (OFZ) northwest of the Marshall Islands in the western Pacific. The OFZ is unique in that it is a wide rift zone that includes many seamounts. Seven units are delineated on the basis of acoustic characteristics and depth: three units (I, II, and III) on the summit of seamounts and four units (IV, V, VI, and VII) in basins. Acoustic characteristics of layers on the summit of guyots and dredged samples indicate that the seamounts had been built above sea level by volcanism. This was followed by reef growth along the summit margin, which enabled deposition of shallow-water carbonates on the summit, and finally by subsidence of the edifices. The subsidence depth of the seamounts, estimated from the lower boundary of unit II, ranges between 1,550 and 2,040 m. The thick unit I of the southern seamounts is correlated with proximity to the equatorial high productivity zone, whereas local currents may have strongly affected the distribution of unit I on northern seamounts. A seismic profile in the basin around the Ita Mai Tai and OSM4 seamounts shows an unconformity between units IV and V, which is widespread from the East Mariana Basin to the Pigafetta Basin. Copyright ?? The Society of Geomagnetism and Earth, Planetary and Space Sciences (SGEPSS); The Seismological Society of Japan; The Volcanological Society of Japan; The Geodetic Society of Japan; The Japanese Society for Planetary Sciences; TERRAPUB.

  19. Co-seismic secondary surface fractures on southeastward extension of the rupture zone of the 2005 Kashmir earthquake

    Science.gov (United States)

    Jayangondaperumal, R.; Thakur, V. C.

    2008-01-01

    After the 2005 Kashmir earthquake, we mapped surface ground fractures in Tangdhar, Uri, Rajouri and Punch sectors and liquefaction features in Jammu area lying close to the eastern side of the Line of Control (LOC) in Kashmir, India. The NW trending ground fractures occurred largely in the hanging wall zone of the southeastern extension of the causative fault in Tangdhar and Uri sectors. The principal compressive stress deduced from the earthquake induced ground fractures is oriented at N10°, whereas the causative Balakot-Bagh fault strikes 330°. The fault-plane solution indicates primarily SW thrusting of the causative fault with a component of strike-slip motion. The ground fractures reflect pronounced strike-slip together with some tensile component. The Tangdhar area showing left-lateral strike-slip motion lies on the hanging wall, and the Uri region showing right-lateral strike-slip movement is located towards the southeastern extension of the causative fault zone. The shear fractures are related to static stress that was responsible for the failure of causative fault. The tensile fractures with offsets are attributed to combination of both static and dynamic stresses, and the fractures and openings without offsets owe their origin due to dynamic stress. In Punch-Rajouri and Jammu area, which lies on the footwall, the fractures and liquefactions were generated by dynamic stress. The occurrence of liquefaction features in the out board part of the Himalayan range front near Jammu is suggestive of stress transfer ˜ 230 km southeast of the epicenter. The Balakot-Bagh Fault (BBF), the Muzaffarabad anticline, the rupture zone of causative fault and the zone of aftershocks — all are aligned in a ˜ 25 km wide belt along the NW-SE trending regional Himalayan strike of Kashmir region and lying between the MBT and the Riasi Thrust (Murree Thrust), suggesting a seismogenic zone that may propagate towards the southeast to trigger an earthquake in the eastern part of

  20. Optimizing the design of vertical seismic profiling (VSP) for imaging fracture zones over hardrock basement geothermal environments

    Science.gov (United States)

    Reiser, Fabienne; Schmelzbach, Cedric; Maurer, Hansruedi; Greenhalgh, Stewart; Hellwig, Olaf

    2017-04-01

    A primary focus of geothermal seismic imaging is to map dipping faults and fracture zones that control rock permeability and fluid flow. Vertical seismic profiling (VSP) is therefore a most valuable means to image the immediate surroundings of an existing borehole to guide, for example, the placing of new boreholes to optimize production from known faults and fractures. We simulated 2D and 3D acoustic synthetic seismic data and processed it through to pre-stack depth migration to optimize VSP survey layouts for mapping moderately to steeply dipping fracture zones within possible basement geothermal reservoirs. Our VSP survey optimization procedure for sequentially selecting source locations to define the area where source points are best located for optimal imaging makes use of a cross-correlation statistic, by which a subset of migrated shot gathers is compared with a target or reference image from a comprehensive set of source gathers. In geothermal exploration at established sites, it is reasonable to assume that sufficient à priori information is available to construct such a target image. We generally obtained good results with a relatively small number of optimally chosen source positions distributed over an ideal source location area for different fracture zone scenarios (different dips, azimuths, and distances from the surveying borehole). Adding further sources outside the optimal source area did not necessarily improve the results, but rather resulted in image distortions. It was found that fracture zones located at borehole-receiver depths and laterally offset from the borehole by 300 m can be imaged reliably for a range of the different dips, but more source positions and large offsets between sources and the borehole are required for imaging steeply dipping interfaces. When such features cross-cut the borehole, they are particularly difficult to image. For fracture zones with different azimuths, 3D effects are observed. Far offset source positions

  1. Reflection seismic imaging of a hydraulically conductive fracture zone in a high noise area, Forsmark, Sweden

    Science.gov (United States)

    Juhlin, C.; Stephens, M. B.; Cosma, C.

    2007-05-01

    High resolution reflection seismic methods have proven to be useful tools for locating fracture zones in crystalline rock. Siting of potential high-level nuclear waste repositories is a particularly important application of these methods. By using small explosive sources (15-75 grams), high resolution images of the sub-surface have been obtained in the depth range 100 m to 2 km in Sweden, Canada and elsewhere. Although ambient noise conditions in areas such as the Fennoscandian and Canadian shields are generally low, industrial noise can be high in some areas, particularly at potential sites suitable for repositories, since these are often close to existing infrastructure. In addition, the presence of this infrastructure limits the choice of sources available to the geophysicist. Forsmark, located about 140 km north of Stockholm, is one such potential site where reflection seismics have been carried out. Existing infrastructure includes nuclear reactors for power generation and a low- level waste repository. In the vicinity of the reactors, it was not possible to use an explosive source due to permitting restrictions. Instead, a VIBSIST system consisting of a tractor mounted hydraulic hammer was used in the vicinity of the reactors. By repeatedly hitting the pavement, without breaking it, at predefined sweeps and then stacking the signals, shot records comparable to explosive data could be generated. These shot records were then processed using standard methods to produce stacked sections along 3 profiles within the reactor area. Clear reflections are seen in the uppermost 600 m along 3 of these profiles. Correlation of crossing profiles shows that the strongest reflection (B8) is generated by a gently east-southeast dipping interface. Prior to construction of the reactors, several boreholes were drilled to investigate the bedrock in the area. One of these boreholes was located close to where two of the profiles cross. Projection of the B8 reflection into the

  2. Evolution of the fracture process zone in high-strength concrete under different loading rates

    Directory of Open Access Journals (Sweden)

    Cámara M.

    2010-06-01

    Full Text Available For cementitious materials, the inelastic zone around a crack tip is termed as fracture process zone (FPZ and dominated by complicated mechanism, such as microcracking, crack deflection, bridging, crack face friction, crack tip blunting by voids, crack branching, and so on. Due to the length of the FPZ is related with the characteristic length of the cementitious materials, the size, extent and location of the FPZ has been the object of countless research efforts for several decades. For instance, Cedolin et al. [1] have used an optical method based on the moiré interferometry to determine FPZ in concrete. Castro-Montero et al. [2] have applied the method of holographic interferometry to mortar to study the extension of the FPZ. The advantage of the interferometry method is that the complete FPZ can be directly observed on the surface of the sample. Swartz et al. [3] has adopted the dye penetration technique to illustrate the changing patterns observed as the crack progress from the tensile side to the compression side of the beam. Moreover, acoustic emission (AE is also an experimental technique well suited for monitoring fracture process. Haidar et al. [4] and Maji et al. [5] have studied the relation between acoustic emission characteristics and the properties of the FPZ. Compared with the extensive research on properties of the FPZ under quasi-static loading conditions, much less information is available on its dynamic characterization, especially for high-strength concrete (HSC. This paper presents the very recent results of an experimental program aimed at disclosing the loading rate effect on the size and velocity of the (FPZ in HSC. Eighteen three-point bending specimens were conducted under a wide range of loading rates from from 10-4 mm/s to 103 mm/s using either a servo-hydraulic machine or a self-designed drop-weight impact device. The beam dimensions were 100 mm 100 mm in cross section, and 420 mm in length. The initial notch

  3. Study of tunnelling through water-bearing fracture zones. Baseline study on technical issues with NE-1 as reference

    Energy Technology Data Exchange (ETDEWEB)

    Yanting Chang; Swindell, Robert; Bogdanoff, Ingvar; Lindstroem, Beatrice; Termen, Jens [WSP Sweden, Stockholm (Sweden) ; Starsec, Peter [SGI, Linkoeping (Sweden)

    2005-04-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is responsible for the management of Sweden's nuclear waste. SKB is investigating various designs for the construction of an underground deep repository for spent nuclear fuel at 500-600 m depths. For the construction of an access tunnel for such a deep repository, the possibility of encountering a water-bearing fracture zone cannot be discounted. Such a zone named NE-1 (deformation zone in accordance to SKB's terminology) was encountered during the construction of the Aespoe Hard Rock Laboratory (HRL) and difficulties with large water inflows were reported. With the aim to assess the feasibility of different technical solutions, SKB commissioned a baseline study into the passage of an access tunnel through a water-bearing fracture zone at three different depths (200 m, 400 m and 600 m). The objectives of this baseline study are to: Increase the knowledge of possible technical solutions for tunnelling through water-bearing fractures zones with the characteristics of the brittle deformation zone NE-1 at different depths, namely 200, 400 and 600 metres; Form a reference document to assist the engineering design and construction work for the passage through such a water-bearing fracture zone; To highlight the engineering parameters that should be obtained to facilitate design for the passage through water-bearing fracture zones.The study has been carried out in the following five stages: A. Compilation of the relevant data for deformation zone NE-1; B. Problem identification and proposal of technical solutions; C. Identification of hazards to be involved in the tunnel excavation; D. Recommendations and conclusions for further investigations; E. Documentation of the results in a final report. The analyses will be expressed in statistical/probabilistic terms where appropriate. In order to specify the precondition that will be valid for this study, a descriptive model of the water-bearing fracture zone is

  4. Modification of rock mass permeability in the zone surrounding a shaft in fractured, welded tuff

    Energy Technology Data Exchange (ETDEWEB)

    Case, J.B.; Kelsall, P.C.

    1987-03-01

    The excavation of a nuclear waste repository at Yucca Mountain, Nevada requires access through shafts and ramps from the ground surface to the repository horizon. To evaluate the need and performance of the sealing subsystem, it is necessary to predict the modifications in the rock immediately surrounding the shaft. The purpose of this study is to develop a model of permeability changes as a function of radial distance from a shaft. The model is based upon analyses which consider modification in rock mass permeability resulting from stress redistribution and blast damage due to excavation around a shaft. Elastic and elastoplastic stress analyses are performed to estimate the stress distribution for a wide range of rock properties and in situ stress conditions. Changes in stress are related to changes in rock mass permeability using stress-permeability relations for fractures obtained from laboratory and field testing. The effects of blast damage are estimated from case histories. The analyses indicate that rock mass permeability is expected to decline rapidly to the undisturbed value with greater permeability changes occurring at or near the shaft wall. For several conditions evaluated, the equivalent permeability of the modified permeability zone, averaged over an annulus one radius wide around the shaft, ranges from 15 to 80 times the undisturbed rock mass permeability. 61 refs., 24 figs., 6 tabs.

  5. Macroscopic strength of oceanic lithosphere revealed by ubiquitous fracture-zone instabilities

    Science.gov (United States)

    Cadio, Cécilia; Korenaga, Jun

    2016-09-01

    The origin of plate tectonics is one of the most fundamental issues in earth and planetary sciences. Laboratory experiments indicate that the viscosity of silicate rocks is so strongly temperature-dependent that the entire surface of the Earth should be one immobile rigid plate. The rheology of oceanic lithosphere is, however, still poorly understood, and there exist few constraints on the temperature dependency of viscosity on the field scale. Here we report a new kind of observational constraint based on the geoid along oceanic fracture zones. We identify a large number of conspicuous small-scale geoid anomalies, which cannot be explained by the standard evolution model of oceanic lithosphere, and estimate their source density perturbations using a new Bayesian inversion method. Our results suggest that they are caused most likely by small-scale convection involving temperature perturbations of ∼ 300 K ± 100 K. Such thermal contrast requires the activation energy of mantle viscosity to be as low as 100 ± 50 kJmol-1 in case of diffusion creep, and 225 ± 112 kJmol-1 in case of dislocation creep, substantially reducing the thickness of the stiffest part of oceanic lithosphere. Oceanic lithosphere may thus be broken and bent much more easily than previously thought, facilitating the operation of plate tectonics.

  6. Early Pliocene Paleoceanography of the Vityaz Fracture Zone, Central Indian Ridge

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Planktic foraminifera from the calcareous substrate of a ferromanganese crust in the Vityaz Fracture Zone (VFZ), Central Indian Ridge were studied to reconstruct the early Pliocene paleoceanography of this region. Eleven species of planktic foraminifera were encountered, among them Globorotalia menardii, Neogloboquadrina dutertrei, Globigerina bulloides and Globigerinoides ruber are prominent. Predominance of N. dutertrei in the top 3 cm of the carbonate substrate is attributed to an influx of fresh water which eventually triggered their productivity by increasing the nutrient level. The presence of G. bulloides and G. menardii in significant proportions in deeper layers suggests the prevalence of open ocean upwelling. The bulk chemical compositions of the substrate at different depth intervals indicates higher enrichment of trace metals in the upper sections which could have been supplied through oceanic water by the chemical weathering of terrestrial matter during the peak of Pliocene Asian monsoon. Thus, it is concluded that during the early Pliocene the biogenic components of the substrate were distinctly contributed by both upwelling and productivity triggered by an influx of fresh water originating from the intensification of the Asian monsoon during the early Pliocene Period.

  7. Present kinematics of the Tjornes Fracture Zone, North Iceland, from campaign and continuous GPS measurements

    KAUST Repository

    Metzger, S.

    2012-11-19

    The Tjörnes Fracture Zone (TFZ), North Iceland, is a 120 km transform offset of the Mid-Atlantic-Ridge that accommodates 18 mm yr−1 plate motion on two parallel transform structures and connects the offshore Kolbeinsey Ridge in the north to the on-shore Northern Volcanic Zone (NVZ) in the south. This transform zone is offshore except for a part of the right-lateral strike-slip Húsavík-Flatey fault (HFF) system that lies close to the coastal town of Húsavík, inducing a significant seismic risk to its inhabitants. In our previous work we constrained the locking depth and slip-rate of the HFF using 4 yr of continuous GPS measurements and found that the accumulated slip-deficit on the fault is equivalent to a Mw6.8 ± 0.1 earthquake, assuming a complete stress release in the last major earthquakes in 1872 and a steady accumulation since then. In this paper we improve our previous analysis by adding 44 campaign GPS (EGPS) data points, which have been regularly observed since 1997. We extract the steady-state interseismic velocities within the TFZ by correcting the GPS data for volcanic inflation of Theistareykir—the westernmost volcano of the NVZ—using a model with a magma volume increase of 25 × 106 m3, constrained by InSAR time-series analysis results. The improved velocity field based on 58 GPS stations confirms the robustness of our previous model and allows to better constrain the free model parameters. For the HFF we find a slightly shallower locking depth of ∼6.2 km and a slightly higher slip-rate of ∼6.8 mm yr−1 that again result in the same seismic potential equivalent to a Mw6.8 earthquake. The much larger number of GPS velocities improves the statistically estimated model parameter uncertainties by a factor of two, when compared to our previous study, a result that we validate using Bayesian estimation.

  8. Microstructures relevant to brittle fracture initiation at the heat-affected zone of weldment of a low carbon steel

    Science.gov (United States)

    Ohya, Kenji; Kim, Jongseop; Yokoyama, Ken'ichi; Nagumo, Michihiko

    1996-09-01

    Charpy toughness of the heat-affected zone (HAZ) of weldment of a low carbon steel has been investigated by means of an instrumented Charpy test and fractographic analysis. Microstructures were varied with thermal cycles simulating double-pass welding. The ductile-brittle transition temperature is the most deteriorated at an intermediate second-cycle heating temperature. The origin of the difference in the transition temperatures has been analyzed to exist in the brittle fracture initiation stage. Fractographic examination correlating with microstructural features has revealed that the brittle fracture initiation site is associated with the intersection of bainitic ferrite areas with different orientations rather than the martensite-austenite constituents. The role of the constraint of plastic deformation on the brittle fracture initiation is discussed.

  9. Petrography and geochemistry of basaltic rocks from the Conrad fracture zone on the America-Antarctica Ridge

    Science.gov (United States)

    le Roex, Anton P.; Dick, Henry J. B.

    1981-06-01

    Intrusive and extrusive basaltic rocks have been dredged from the Conrad fracture zone (transecting the slow-spreading America-Antarctica Ridge). The majority of rocks recovered are holocrystalline with the dominant mineral assemblage being plagioclase plus clinopyroxene with or without minor Fe-Ti oxides (olivine occurs in only three samples) and many of the samples show evidence of extensive alteration. Secondary minerals include chlorite, actinolite, K- and Na-feldspar, analcite and epidote. In terms of bulk chemistry the rocks are characterized by their generally evolved and highly variable compositions (e.g. Mg *=0.65-0.35;TiO 2=0.7-3.6%;Zr=31-374ppm;Nb=differentiation observed in the Conrad fracture zone basalts implies some additional constraint other than spreading rate on the formation of ferrobasalt and reaffirms the importance of extensive crustal differentiation during the production of this basalt type.

  10. Modeling of the bottom water flow through the Romanche Fracture Zone with a primitive equation model - Part I: Dynamics

    OpenAIRE

    Ferron, Bruno; Mercier, Herle; Treguier, Anne-marie

    2000-01-01

    This paper investigates the dynamics of the Antarctic Bottom Water (AABW) flow through the Romanche Fracture Zone (RFZ) in a primitive equation model with a high horizontal and vertical resolution. Two examples of Rows over simple bathymetries show that a reduced gravity model captures the essential dynamics of the primitive equation model. The reduced gravity model is then used as a tool to identify what are the bathymetric structures (sills, narrows) that mostly constrain the AABW flow thro...

  11. The formation of open fractures in cohesive materials, results of scaled analogue and numerical modelling on fault zone porosity development

    Directory of Open Access Journals (Sweden)

    Urai J.L.

    2010-06-01

    Full Text Available We compare analogue and numerical models of dilatational fractures at low confining stress. These structures form an effective conduit for fluid flow in the field, but are difficult to model since they form in cohesive materials at low stresses. We use a truly cohesive powder for the analogue models and a Discrete Element Model (DEM with brittle-elastic bonds for the numerical modelling. We show that despite variations in the model type, small differences in the location of initial fractures and the way these structures link-up to control the evolution of the model, the observed structures are robust. Three structural zones develop where different fault types dominate. In 3D numerical models we show an increase of the porosity on the fault zone with increasing deformation. The progradation direction is shown to be controlled by the position of the fracture. The combination of analogue models with cohesive powder and DEMs with internal cohesion is an excellent tool to study the evolution of open fractures.

  12. Hydrogeochemical and microbiological effects on fractures in the Excavation Damaged Zone (EDZ)

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (Geopoint AB, Sollentuna (Sweden)); Gimeno, Maria; Auque, Luis F.; Gomez, Javier B.; Acero, Patricia (Univ. of Zaragoza, Earth Science Dept., Zaragoza (Spain)); Pedersen, Karsten (Microbial Analytics, Moelnlycke (Sweden))

    2009-01-15

    Due to the disturbances associated with the excavation, construction and closure of the repository for storage of spent nuclear fuel, the saturation state of the groundwaters at repository depth with respect to several mineral phases may change and mineral precipitation/dissolution reactions may take place. In addition, changing groundwater conditions may facilitate microbial growth on fracture walls. These processes are of importance since they may influence the stability and safety of the Excavation Damaged Zone (EDZ) because precipitation and microbial growth may seal the hydraulically conductive fractures caused by the repository construction. Different processes expected to occur in the EDZ during the open repository conditions and after repository closure have been evaluated based on data from Forsmark, Laxemar and Aespoe. Geochemical modelling by using PHREEQC was applied to simulate the following cases: - increase of temperature to 50 deg C and 100 deg C to simulate the thermal effects from spent nuclear fuel; - open repository conditions simulating atmospheric conditions (equilibrium with atmospheric partial pressures of CO{sub 2}(g) and O{sub 2}(g)); - mixing with deep saline water simulating up-coning; - mixing with shallow infiltration waters simulating down-coning; - mixing with different proportions of cement dissolution porewater. The effect of variable temperatures (up to 100 deg C) on most of the above modelled processes has also been assessed. A preliminary estimation of the effect of mineral precipitation on the hydraulic conductivity of the EDZ has been carried out. For most of the modelling cases, the estimated decrease of the hydraulic conductivity in ten years is smaller than 2%. Microbial evaluation was used to identify the potential for microbial calcite and iron hydroxide formation during various repository conditions. The most important groundwater parameters for microorganisms, are pH and carbonate, ferrous iron, methane and the

  13. Statistical model of fractures and deformations zones for Forsmark. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    La Pointe, Paul R. [Golder Associate Inc., Redmond, WA (United States); Olofsson, Isabelle; Hermanson, Jan [Golder Associates AB, Uppsala (Sweden)

    2005-04-01

    different high and low fracture intensity intervals in order to capture the variation of this parameter in the model volume. The fracture intensity P32 has been derived by means of simulations for each rock domain and each fracture type, and is expressed as a mean value, and if possible standard deviation and span. The uncertainty in the model has been quantified: for the different geometrical parameters by providing ranges of variations and studying relevant distribution models, by conducting sensitivity analysis on some input data: the effect of truncation of lineaments at the border of the regional model volume and the impact of truncation in outcrop mapping. An alternative conceptual model is under study which is based on the identified deterministic deformation zones, and not on lineaments. An important issue using this model is the bias of information and the limited amount of structures. The current DFN model still contains significant uncertainties which need to be resolved in order to be able to produce a final site DFN model. Three main issues are listed below: The definition of the subhorizontal fracture set in terms of geological processes and tectonics. The size distribution is a critical issue for the hydrogeology of the site. The variation of the fracture intensity by rock domain has been identified but the variation pattern and the spatial distribution within an individual domain are still sufficiently unpredictable that the fracture network permeability structure within a rock domain is uncertain from a conceptual perspective, not just a data uncertainty perspective. Moreover, many rock domains have not yet been sampled by boreholes or outcrops, and thus their fracture properties remain highly uncertain. Validation of the DFN models will require resolution of these two issues, and may also require the drilling of highly inclined or horizontal boreholes. Near-vertical boreholes and the mapping protocol to only map fracture traces in outcrop greater than 0

  14. Flow zone characterisation in a fractured aquifer using spring and open-well T and EC monitoring.

    Science.gov (United States)

    Agbotui, Prodeo; West, Landis; Bottrell, Simon

    2017-04-01

    The Cretaceous Chalk is a very important aquifer in England, and its relatively high transmissivity derives essentially from a well-developed network of solutionally-enhanced fractures and conduits. Like other fractured aquifers, characterisation and delineation of flow pathways and hence catchment boundaries is important. Determination of flow pathways for source catchment delineation (e.g. identification of safeguarding zones around wells) is critical for the effective management and protection of the groundwater resource. It also determines the areal extent of contamination from known sources, and enables the targeted sampling of flow zones e.g. for monitored natural attenuation (MNA). A rather simplistic conceptualisation of the unconfined chalk aquifer of East Yorkshire is currently used as a basis for numerical simulations: linearly reducing hydraulic conductivity (K) with depth below the maximum groundwater elevation, reducing to a minimum value below the zone of groundwater table fluctuation. This study represents an attempt to improve this conceptualisation via improved characterisation of permeable zones within the aquifer. The methods used are: pumping test drawdown analyses for transmissivity, ambient open-well dilution testing; rainfall, groundwater head, and spring / open-well specific electrical conductance (SEC) and temperature monitoring. Pumping test analyses yield overall well transmissivity; the open-well dilution/monitoring approach identifies inflow, outflow, crossflow zones and direction and rate of flow in wells; seasonal changes in flows in wells and springs reflect the annual recharge and recession cycle and the impact of seasonal hydraulic head variation on the activation/deactivation of permeable pathways. Variations in spring and well-water electrical conductivity / temperature provide insight into groundwater residence times and the degree of isolation of groundwater from atmospheric and soil zone sources of CO2. The results of the

  15. Application of artificial intelligence to characterize naturally fractured zones in Hassi Messaoud Oil Field, Algeria

    Energy Technology Data Exchange (ETDEWEB)

    El Ouahed, Abdelkader Kouider; Mazouzi, Amine [Sonatrach, Rue Djenane Malik, Hydra, Algiers (Algeria); Tiab, Djebbar [Mewbourne School of Petroleum and Geological Engineering, The University of Oklahoma, 100 East Boyd Street, SEC T310, Norman, OK, 73019 (United States)

    2005-12-15

    In highly heterogeneous reservoirs classical characterization methods often fail to detect the location and orientation of the fractures. Recent applications of Artificial Intelligence to the area of reservoir characterization have made this challenge a possible practice. Such a practice consists of seeking the complex relationship between the fracture index and some geological and geomechanical drivers (facies, porosity, permeability, bed thickness, proximity to faults, slopes and curvatures of the structure) in order to obtain a fracture intensity map using Fuzzy Logic and Neural Network. This paper shows the successful application of Artificial Intelligence tools such as Artificial Neural Network and Fuzzy Logic to characterize naturally fractured reservoirs. A 2D fracture intensity map and fracture network map in a large block of Hassi Messaoud field have been developed using Artificial Neural Network and Fuzzy Logic. This was achieved by first building the geological model of the permeability, porosity and shale volume using stochastic conditional simulation. Then by applying some geomechanical concepts first and second structure directional derivatives, distance to the nearest fault, and bed thickness were calculated throughout the entire area of interest. Two methods were then used to select the appropriate fracture intensity index. In the first method well performance was used as a fracture index. In the second method a Fuzzy Inference System (FIS) was built. Using this FIS, static and dynamic data were coupled to reduce the uncertainty, which resulted in a more reliable Fracture Index. The different geological and geomechanical drivers were ranked with the corresponding fracture index for both methods using a Fuzzy Ranking algorithm. Only important and measurable data were selected to be mapped with the appropriate fracture index using a feed forward Back Propagation Neural Network (BPNN). The neural network was then used to obtain a fracture intensity

  16. FATIGUE LIFE PREDICTION BASED ON MACROSCOPIC PLASTIC ZONE ON FRACTURE SURFACE OF AISI-SAE 1018 STEEL

    Directory of Open Access Journals (Sweden)

    G.M. Domínguez Almaraz

    2010-06-01

    Full Text Available This paper deals with rotating bending fatigue tests at high speed (150 Hz carried out on AISI-SAE 1018 steel with a high content of impurities (non metallic inclusions, for which the high experimental stress inside the specimen is close to the elastic limit of the material. Simulations of rotating loading are obtained by Visual NASTRAN software in order to determine the numerical stresse and strain distributions inside a hypothetical homogeneous specimen; later, this information is used for the experimental set up. A general description of experimental test machine and experimental conditions are developed and then, the experimental results are presented and discussed according the observed failure origin related to the non metallic inclusions and the associated high stress zones. Finally, a simple model is proposed to predict the fatigue life for this non homogeneous steel under high speed rotating bending fatigue tests close to the elastic limit, based on the rate between the visual macro-plastic deformation zone at fracture surface and the total fracture surface, together with the crack initiation inclusion (or inclusions located at this zone.

  17. Fatigue Crack Growth Rate and Fracture Resistance of Heat Affected Zone of Stainless Steel Narrow Gap Welds

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ho Jung; Kim, Min U; Jang, Chang Heui [KAIST, Daejeon (Korea, Republic of); Cho, Sun Young [Korea Laboratory Engineering System, Daejeon (Korea, Republic of); Yang, Jun Seog [KEPCO, Daejeon (Korea, Republic of)

    2011-05-15

    In nuclear power plants, the automated narrow gap welding (NGW) technique has been widely used in joining stainless steel pipes in primary coolant system. As the primary system pipes are subjected to various transients during plant operation, cracks could initiate and propagate that would cause accidents. To prevent the cracking from developing into sudden failure in the primary system, leak-before-break (LBB) design concept has been developed and applied to many nuclear power plants. Meanwhile, to apply the LBB design, mechanical properties of the structural materials of piping systems should be evaluated, especially at weld zone and heat affected zone (HAZ), because mechanical properties within those regions show considerable scatter and spatial differences. In this study, fatigue crack grow rate (FCGR) and fracture resistance of base metal, weld zone, and HAZ of type 316L stainless steel narrow gap welds were performed at plant operating temperature (315 .deg. C) and room temperature. In particular, FCGR and fracture resistance of HAZ were evaluated in detail and compared to those of base metal

  18. Delayed rupture of flexor tendons in zone V complicated by neuritis 18 years following Galeazzi fracture-dislocation.

    Science.gov (United States)

    Nagy, Mathias Thomas; Ghosh, Sabyasachi; Shah, Bhavik; Sankar, Thangasamy

    2014-04-16

    We report a rare case of an 84-year-old woman who presented with delayed, complete rupture of superficial (flexor digitorum superficialis) and deep flexor tendons (flexor digitorum profundus) of the third, fourth and fifth digits of the right hand in zone V of the flexor tendons. The patient, who was otherwise healthy, active and independent, incurred a closed fracture of her right wrist 18 years ago, which was treated conservatively. Current X-rays and operative findings confirmed a malunited Galeazzi fracture-dislocation with volar dislocation of the ulna from the distal radioulnar joint. She underwent surgical treatment to improve her hand function and agonising neuritis symptoms, as she was unable to use her middle, ring and little fingers and had developed severe neuritis of the ulnar nerve. Exploration and repair of the flexor tendons, nerve decompressions and Darrach procedure were performed. On follow-up, the patient showed improvement in hand function with the neuritis completely resolved.

  19. New Bathymetry Reveals Detailed History of Transform Fault Segmentation at the Clarion Fracture Zone

    Science.gov (United States)

    Morrow, T. A.; Kim, S. S.; Mittelstaedt, E. L.; Olive, J. A. L.; Howell, S. M.

    2016-12-01

    Between 150°W and 135°W, the Clarion Fracture Zone (FZ) coalesces from six discrete FZ traces to a single FZ over a period of 30 million years, coinciding with a change in plate motion that placed the associated transform fault (TF) in compression. Although FZ observations suggest segmented TFs may unify to a single TF as a response to tectonic compression, little is known about the timing of this process, as well as how it may alter lithosphere structure. Using new bathymetry and gravity data from the Clarion FZ, we investigate this process through interpreted structural maps of the seafloor, numerical simulations of a segmented FZ, and modeling of gravitational anomalies. From 3154 mapped volcanic ridges and faults, we observe temporally correlated changes in intra-transform spreading center (ITSC) fabrics and plate motions that suggest that ITSC fabrics further from the center of the FZ responded to compressional changes in plate motion sooner (up to 5 million years) than ITSC fabrics located near the center of the FZ. Using the 2D finite-difference, visco-elastic-plastic code SiStER, we simulate the tectonic evolution of a differentially cooling lithosphere broken by several FZs and subject to compression or extension. We vary parameters such as the number of initial ITSC segments (0-4) and the rate of compression or extension (0-4.5 mm/year). In some model cases, we also vary the strength of the initial FZ offset by introducing small, low-viscosity weaknesses in the modeled lithosphere at the FZ. Gravity anomalies are calculated from the simulated lithospheric structure by using Talwani's 2D polygon algorithm. We then compare model predicted and existing satellite-derived gravity anomalies over the segmented Clarion FZ to constrain the relative timing of compressional changes along individual transform segment traces and structural changes within the FZ. Our observations suggest that compression and extension are not uniformly distributed across a segmented

  20. Three dimensional numerical modeling for investigation of fracture zone filled with water by borehole radar; Borehole radar ni yoru gansui hasaitai kenshutsu no sanjigen suchi modeling

    Energy Technology Data Exchange (ETDEWEB)

    Sanada, Y.; Watanabe, T.; Ashida, Y. [Kyoto University, Kyoto (Japan); Hasegawa, K.; Yabuuchi, S. [Power Reactor and Nuclear Fuel Development Corp., Tokyo (Japan)

    1997-05-27

    Water bearing fracture zones existing in rock mass largely influence the underground water flow and dynamic property of rock mass. The detailed survey of the location and size of water bearing fracture zones is an important task in the fields such as civil engineering, environment and disaster prevention. Electromagnetic waves of high frequency zones can be grasped as a wave phenomenon, and the record obtained in the actual measurement is wave forms of time series. In the exploration using borehole radar, this water bearing fracture zone becomes the reflection surface, and also becomes a factor of damping in the transmitted wave. By examining changes which these give to the observed wave forms, therefore, water bearing fracture zones can be detected. This study made three dimensional numerical modeling using the time domain finite difference method, and obtained the same output as the observed wave form obtained using borehole radar. By using this program and changing each of the parameters such as frequency and resistivity in the homogeneous medium, changes of the wave forms were observed. Further, examples were shown of modeling of detection of water bearing fracture zones. 5 refs., 16 figs., 1 tab.

  1. Geophysical imaging of near subsurface layers to detect fault and fractured zones in the Tournemire Experimental Platform, France.

    Science.gov (United States)

    Nhu Ba, Elise, Vi; Noble, Mark; Gélis, Céline; Gesret, Alexandrine; Cabrera, Justo

    2013-04-01

    IRSN (the French Institute for Radiological Protection and Nuclear Safety) is in charge of the expertise of the safety report of the French deep geological disposal site project in the East of France. With the goal of understanding the various transport and mechanical properties of clay-rocks, IRSN has conducted several research programs at the Tournemire Experimental Platform (TEP, in the Department of Aveyron in the South of France). Three major sub-horizontal layers characterize the sedimentary Jurassic formations of the TEP. At the base of the stratigraphic column, we find a sequence of limestones and dolomites, that is overlain by an argillaceous formation composed of a 250 m thick clay-rock layer. Above this layer, there is another sequence of limestones and dolomites. The TEP is characterized by a 2 km long tunnel, which allows in situ access to the Toarcian clay- rock layer. In addition to the main Cernon fault, secondary fault zones affect the clay-rock formation and have been observed in the galleries and also identified in several underground boreholes. These sub-vertical fault zones or fracture network display mainly subhorizontal offset (decametric scale) and a small vertical one (meter scale). In the upper limestone, these fault zones widen and fracturing becomes more scattered. In an attempt to detect fault zones in clay-rock layers such as the one described above, IRSN carried out in 2001 a 3D high-resolution seismic survey from the surface in collaboration with CGG. A sub-vertical fault was successfully picked out by the seismic data at the interface between the clay-rock formation and the underlying limestones. This fault is interpreted as the downward continuation of one of the fault zones identified in the tunnel. However, because of the weak seismic impedance contrast in the clay-rock layer and the small vertical offset of sub-vertical fault zones, these fault zones could not be identified in the clay-rock formation. No fault or fracture zone

  2. Modelling of the effect of discontinuities on the extent of the fracture zone surrounding deep tunnels

    CSIR Research Space (South Africa)

    Sellers, EJ

    2000-10-01

    Full Text Available A series of physical and numerical model tests were performed to investigate the behaviour of the rock surrounding circular excavations under high confining pressures. The aim was to provide information on the formation of fractures around deep...

  3. Hydrogeochemical and microbiological effects on fractures in the Excavation Damaged Zone (EDZ)

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (Geopoint AB, Sollentuna (Sweden)); Gimeno, Maria; Auque, Luis F.; Gomez, Javier B.; Acero, Patricia (Univ. of Zaragoza, Earth Science Dept., Zaragoza (Spain)); Pedersen, Karsten (Microbial Analytics, Moelnlycke (Sweden))

    2009-01-15

    Due to the disturbances associated with the excavation, construction and closure of the repository for storage of spent nuclear fuel, the saturation state of the groundwaters at repository depth with respect to several mineral phases may change and mineral precipitation/dissolution reactions may take place. In addition, changing groundwater conditions may facilitate microbial growth on fracture walls. These processes are of importance since they may influence the stability and safety of the Excavation Damaged Zone (EDZ) because precipitation and microbial growth may seal the hydraulically conductive fractures caused by the repository construction. Different processes expected to occur in the EDZ during the open repository conditions and after repository closure have been evaluated based on data from Forsmark, Laxemar and Aespoe. Geochemical modelling by using PHREEQC was applied to simulate the following cases: - increase of temperature to 50 deg C and 100 deg C to simulate the thermal effects from spent nuclear fuel; - open repository conditions simulating atmospheric conditions (equilibrium with atmospheric partial pressures of CO{sub 2}(g) and O{sub 2}(g)); - mixing with deep saline water simulating up-coning; - mixing with shallow infiltration waters simulating down-coning; - mixing with different proportions of cement dissolution porewater. The effect of variable temperatures (up to 100 deg C) on most of the above modelled processes has also been assessed. A preliminary estimation of the effect of mineral precipitation on the hydraulic conductivity of the EDZ has been carried out. For most of the modelling cases, the estimated decrease of the hydraulic conductivity in ten years is smaller than 2%. Microbial evaluation was used to identify the potential for microbial calcite and iron hydroxide formation during various repository conditions. The most important groundwater parameters for microorganisms, are pH and carbonate, ferrous iron, methane and the

  4. Analysis of the hydraulic data from the MI fracture zone at the Grimsel Rock Laboratory, Switzerland

    Energy Technology Data Exchange (ETDEWEB)

    Davey, A.; Karasaki, K.; Long, J.C.S.; Landsfeld, M.; Mensch, A.; Martel, S.J.

    1989-10-01

    One of the major problems in analyzing flow and transport in fractured rock is that the flow may be largely confined to a poorly connected network of fractures. In order to overcome some of this problem, Lawrence Berkeley Laboratory (LBL) has been developing a new type of fracture hydrology model called an equivalent discontinuum model. In this model the authors represent the discontinuous nature of the problem through flow on a partially filled lattice. A key component in constructing an equivalent discontinuum model from this lattice is removing some of the conductive elements such that the system is partially connected in the same manner as the fracture network. This is done through a statistical inverse technique called simulated annealing. The fracture network model is annealed by continually modifying a base model, or template such that the modified systems behave more and more like the observed system. In order to see how the simulated annealing algorithm works, the authors have developed a series of synthetic real cases. In these cases, the real system is completely known so that the results of annealing to steady state data can be evaluated absolutely. The effect of the starting configuration has been studied by varying the percent of conducting elements in the initial configuration. Results have shown that the final configurations converge to about the same percentage of conducting elements. An example using Nagra field data from the Migration Experiment (MI) at Grimsel Rock Laboratory in Switzerland is also analyzed. 24 refs., 33 figs., 3 tabs.

  5. The concept of the average stress in the fracture process zone for the search of the crack path

    Directory of Open Access Journals (Sweden)

    Yu.G. Matvienko

    2015-10-01

    Full Text Available The concept of the average stress has been employed to propose the maximum average tangential stress (MATS criterion for predicting the direction of fracture angle. This criterion states that a crack grows when the maximum average tangential stress in the fracture process zone ahead of the crack tip reaches its critical value and the crack growth direction coincides with the direction of the maximum average tangential stress along a constant radius around the crack tip. The tangential stress is described by the singular and nonsingular (T-stress terms in the Williams series solution. To demonstrate the validity of the proposed MATS criterion, this criterion is directly applied to experiments reported in the literature for the mixed mode I/II crack growth behavior of Guiting limestone. The predicted directions of fracture angle are consistent with the experimental data. The concept of the average stress has been also employed to predict the surface crack path under rolling-sliding contact loading. The proposed model considers the size and orientation of the initial crack, normal and tangential loading due to rolling–sliding contact as well as the influence of fluid trapped inside the crack by a hydraulic pressure mechanism. The MATS criterion is directly applied to equivalent contact model for surface crack growth on a gear tooth flank.

  6. Variations in the Holocene North Atlantic Bottom Current Strength in the Charlie Gibbs Fracture Zone

    Science.gov (United States)

    Kissel, C.; Van Toer, A.; Cortijo, E.; Turon, J.

    2011-12-01

    The changes in the strength of the North Atlantic bottom current during the Holocene period is presented via the study of cores located at the western termination of the northern deep channel of the Charlie-Gibbs fracture zone. This natural roughly E-W corridor is bathed by the Iceland-Scotland overflow water (ISOW) when it passes westward out of the Iceland Basin into the western North Atlantic basin. At present, it is also described as the place where southern sourced silicate-rich Lower Deep Water (LDW) derived from the Antarctic Bottom Waters (AABW) are passing westward, mixing with the ISOW. We conducted a deep-water multiproxy analysis on two nearby cores, coupling magnetic properties, anisotropy, sortable silt and benthic foraminifera isotopes. The first core had been taken by the R. V. Charcot in 1977 and the second one is a CASQ core taken during the IMAGES-AMOCINT MD168- cruise in the framework of the 06-EuroMARC-FP-008 Project on board the R.V. Marion Dufresne (French Polar Institute, IPEV) in 2008. The radiocarbon ages indicate an average sedimentation rate of about 50 cm/kyr through middle and late Holocene allowing a data resolution ranging from 40 to 100 years depending on the proxy. In each core, we observe long-term and short-term changes in the strength of the bottom currents. On the long term, a decrease in the amount of magnetic particles (normalized by the carbonate content) is first from 10 kyr to 8.6 kyr and then between 6 and 2 kyrs before reaching a steady state. Following Kissel et al. (2009), this indicates a decrease in the ISOW strength. The mean sortable silt shows exactly the same pattern indicating that not only the intensity of the ISOW but the whole deep water mass bathing the sites has decreased. On the short term, a first very prominent event centered at about 8.4 kyr (cal. ages) is marked by a pronounced minima in magnetic content and the smaller mean sortable silt sizes. This is typical for an abrupt reduction in deep flow

  7. Using Reactive Transport Modeling to Understand Formation of the Stimson Sedimentary Unit and Altered Fracture Zones at Gale Crater, Mars

    Science.gov (United States)

    Hausrath, E. M.; Ming, D. W.; Peretyazhko, T.; Rampe, E. B.

    2017-01-01

    Water flowing through sediments at Gale Crater, Mars created environments that were likely habitable, and sampled basin-wide hydrological systems. However, many questions remain about these environments and the fluids that generated them. Measurements taken by the Mars Science Laboratory Curiosity of multiple fracture zones can help constrain the environments that formed them because they can be compared to nearby associated parent material (Figure 1). For example, measurements of altered fracture zones from the target Greenhorn in the Stimson sandstone can be compared to parent material measured in the nearby Big Sky target, allowing constraints to be placed on the alteration conditions that formed the Greenhorn target from the Big Sky target. Similarly, CheMin measurements of the powdered transport modeling of 1) the formation of the Big Sky target from a Rocknest eolian deposit-like parent material, and 2) the formation of the Greenhorn target from the Big Sky target. This work allows us to test the relationships between the targets and the characteristics of the aqueous conditions that formed the Greenhorn target from the Big Sky target, and the Big Sky target from a Rocknest eolian deposit-like parent material.

  8. Biodiversity of nematode assemblages from the region of the Clarion-Clipperton Fracture Zone, an area of commercial mining interest

    Directory of Open Access Journals (Sweden)

    Hawkins Lawrence E

    2003-01-01

    Full Text Available Abstract Background The possibility for commercial mining of deep-sea manganese nodules is currently under exploration in the abyssal Clarion-Clipperton Fracture Zone. Nematodes have potential for biomonitoring of the impact of commercial activity but the natural biodiversity is unknown. We investigate the feasibility of nematodes as biomonitoring organisms and give information about their natural biodiversity. Results The taxonomic composition (at family to genus level of the nematode fauna in the abyssal Pacific is similar, but not identical to, the North Atlantic. Given the immature state of marine nematode taxonomy, it is not possible to comment on the commonality or otherwise of species between oceans. The between basin differences do not appear to be directly linked to current ecological factors. The abyssal Pacific region (including the Fracture Zone could be divided into two biodiversity subregions that conform to variations in the linked factors of flux to the benthos and of sedimentary characteristics. Richer biodiversity is associated with areas of known phytodetritus input and higher organic-carbon flux. Despite high reported sample diversity, estimated regional diversity is less than 400 species. Conclusion The estimated regional diversity of the CCFZ is a tractable figure for biomonitoring of commercial activities in this region using marine nematodes, despite the immature taxonomy (i.e. most marine species have not been described of the group. However, nematode ecology is in dire need of further study.

  9. The Cosmology Large Angular Scale Surveyor (CLASS)

    Science.gov (United States)

    Eimer, Joseph; Ali, A.; Amiri, M.; Appel, J. W.; Araujo, D.; Bennett, C. L.; Boone, F.; Chan, M.; Cho, H.; Chuss, D. T.; Colazo, F.; Crowe, E.; Denis, K.; Dünner, R.; Essinger-Hileman, T.; Gothe, D.; Halpern, M.; Harrington, K.; Hilton, G.; Hinshaw, G. F.; Huang, C.; Irwin, K.; Jones, G.; Karakla, J.; Kogut, A. J.; Larson, D.; Limon, M.; Lowry, L.; Marriage, T.; Mehrle, N.; Miller, A. D.; Miller, N.; Moseley, S. H.; Novak, G.; Reintsema, C.; Rostem, K.; Stevenson, T.; Towner, D.; U-Yen, K.; Wagner, E.; Watts, D.; Wollack, E.; Xu, Z.; Zeng, L.

    2014-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) is an array of telescopes designed to search for the signature of inflation in the polarization of the Cosmic Microwave Background (CMB). By combining the strategy of targeting large scales (>2 deg) with novel front-end polarization modulation and novel detectors at multiple frequencies, CLASS will pioneer a new frontier in ground-based CMB polarization surveys. In this talk, I give an overview of the CLASS instrument, survey, and outlook on setting important new limits on the energy scale of inflation.

  10. Induced seismicity of a normal blind undetected reservoir-bounding fault influenced by dissymmetric fractured damage zones

    Science.gov (United States)

    Rohmer, J.

    2014-04-01

    Fluid injection in deep sedimentary porous formations might induce shear reactivation of reservoir bounding faults. Here, we focus on `blind' 1000-m-long normal faults (with shear displacement ≤10 m), which can hardly be detected using conventional seismic surveys, but might potentially induce seismicity felt on surface. The influence of the dissymmetry in the internal structure of the fractured damage zone DZ is numerically investigated by using 2-D plane-strain finite-element simulations of a 1500-m-deep fluid injection into a porous reservoir. The problem is solved within the framework of fully saturated isothermal elasto-plastic porous media by both accounting for fault slip weakening and shear-induced degradation of fault core permeability. The numerical results show that the presence of a thick fractured hanging wall's DZ (with Young's modulus decreasing with the distance to the fault core due to the presence of fractures) strongly controls the magnitude M of the seismic event induced by the rupture. In the case modelled, M changed by more than 1.0 unit when the DZ thickness is varied from 5 to 50 m (M ranges from ˜0.1 to ˜1.5, i.e. from a `low' to a `low-to-moderate' seismicity activity). However, further extending DZ up to 90 m has little effect and the relationship reaches a quasi-horizontal plateau. This tendency is confirmed considering other initial conditions and injection scenarios. Finally, the presence of a thicker footwall DZ appears to lower the influence of hanging wall's DZ, but with lesser impact than the degree of fracturing.

  11. Experimental and Numerical Studies on Development of Fracture Process Zone (FPZ) in Rocks under Cyclic and Static Loadings

    Science.gov (United States)

    Ghamgosar, M.; Erarslan, N.

    2016-03-01

    The development of fracture process zones (FPZ) in the Cracked Chevron Notched Brazilian Disc (CCNBD) monsonite and Brisbane tuff specimens was investigated to evaluate the mechanical behaviour of brittle rocks under static and various cyclic loadings. An FPZ is a region that involves different types of damage around the pre-existing and/or stress-induced crack tips in engineering materials. This highly damaged area includes micro- and meso-cracks, which emerge prior to the main fracture growth or extension and ultimately coalescence to macrofractures, leading to the failure. The experiments and numerical simulations were designed for this study to investigate the following features of FPZ in rocks: (1) ligament connections and (2) microcracking and its coalescence in FPZ. A Computed Tomography (CT) scan technique was also used to investigate the FPZ behaviour in selected rock specimens. The CT scan results showed that the fracturing velocity is entirely dependent on the appropriate amount of fracture energy absorbed in rock specimens due to the change of frequency and amplitudes of the dynamic loading. Extended Finite Element Method (XFEM) was used to compute the displacements, tensile stress distribution and plastic energy dissipation around the propagating crack tip in FPZ. One of the most important observations, the shape of FPZ and its extension around the crack tip, was made using numerical and experimental results, which supported the CT scan results. When the static rupture and the cyclic rupture were compared, the main differences are twofold: (1) the number of fragments produced is much greater under cyclic loading than under static loading, and (2) intergranular cracks are formed due to particle breakage under cyclic loading compared with smooth and bright cracks along cleavage planes under static loading.

  12. Geometrical and mechanical properties of the fractures and brittle deformation zones based on the ONKALO tunnel mapping, 2400 - 4390 m tunnel chainage

    Energy Technology Data Exchange (ETDEWEB)

    Moenkkoenen, H.; Rantanen, T.; Kuula, H. [WSP Finland Oy, Helsinki (Finland)

    2012-05-15

    In this report, the rock mechanics parameters of fractures and brittle deformation zones have been estimated in the vicinity of the ONKALO area at the Olkiluoto site, western Finland. This report is an extension of the previously published report: Geometrical and Mechanical properties if the fractures and brittle deformation zones based on ONKALO tunnel mapping, 0-2400 m tunnel chainage (Kuula 2010). In this updated report, mapping data are from 2400-4390 m tunnel chainage. Defined rock mechanics parameters of the fractures are associated with the rock engineering classification quality index, Q', which incorporates the RQD, Jn, Jr and Ja values. The friction angle of the fracture surfaces is estimated from the Jr and Ja numbers. There are no new data from laboratory joint shear and normal tests. The fracture wall compressive strength (JCS) data are available from the chainage range 1280-2400 m. Estimation of the mechanics properties of the 24 brittle deformation zones (BDZ) is based on the mapped Q' value, which is transformed to the GSI value in order to estimate strength and deformability properties. A component of the mapped Q' values is from the ONKALO and another component is from the drill cores. In this study, 24 BDZs have been parameterized. The location and size of the brittle deformation are based on the latest interpretation. New data for intact rock strength of the brittle deformation zones are not available. (orig.)

  13. Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel

    Science.gov (United States)

    Lambert-Perlade, A.; Sturel, T.; Gourgues, A. F.; Besson, J.; Pineau, A.

    2004-03-01

    The effect of the welding cycle on the fracture toughness properties of high-strength low alloy (HSLA) steels is examined by means of thermal simulation of heat-affected zone (HAZ) microstructures. Tensile tests on notched bars and fracture toughness tests at various temperatures are performed together with fracture surface observations and cross-sectional analyses. The influence of martensite-austenite (M-A) constituents and of “crystallographic” bainite packets on cleavage fracture micromechanisms is, thus, evidenced as a function of temperature. Three weakest-link probabilistic models (the “Master-curve” (MC) approach, the Beremin model, and a “double-barrier” (DB) model) are applied to account for the ductile-to-brittle transition (DBT) fracture toughness curve. Some analogy, but also differences, are found between the MC approach and the Beremin model. The DB model, having nonfitted, physically based scatter parameters, is applied to the martensite-containing HAZ microstructures and gives promising results.

  14. Intermediate-depth Fracturing of Oceanic Lithosphere in Subduction Zones: Memories from Exhumed High-Pressure Ophiolites

    Science.gov (United States)

    Angiboust, Samuel; Oncken, Onno; Agard, Philippe

    2014-05-01

    Understanding processes acting along the subduction interface is crucial to assess lithospheric scale coupling between tectonic plates and mechanisms causing intermediate-depth seismicity. Despite a wealth of geophysical studies aimed at better characterizing/localizing this seismicity, we still critically lack constrains on processes triggering fracturing in regions (40-100km depths; T > 400°C) where deformation is expected to be achieved by plastic flow. We herein attempt to bridge this gap by providing a review of available evidence from brittle deformation patterns in exhumed High Pressure (HP) ophiolites, together with some new, critical observations. Field examples from various ophiolitic terranes (New-Caledonia, W. Alps, Tian Shan…) indicate that brittle deformation under HP conditions generally implies vein filling and precipitation of HP minerals, probably under very high pore fluid pressure conditions. Coalescence of such vein networks could explain some of the seismic events recorded along the fluid-rich subduction interface region. By contrast, HP pseudotachylites (though reported in only few localities so far) are apparently restricted to somehow deeper slab regions where fluid-deficient conditions are prevalent (Corsica, Zambia, Voltri?). The recent discovery of eclogite breccias, found as m-sized dismembered fragments within an eclogite-facies shear zone from the Monviso area (W. Alps), provides a new opportunity to study the genesis of intermediate-depth earthquakes. We herein argue that these eclogite breccias constitute unique remnants from an ancient fault zone associated with intraslab, intermediate-depth seismicity at ca. 80 km depth. The breccia is internally made of 1-10 cm-sized rotated fragments of eclogite mylonite cemented by an eclogite-facies matrix attesting of fracturing and fault sealing under lawsonite-eclogite facies conditions (550°C, 2.5 GPa) during subduction of the Tethyan seafloor. Textural observations and polyphased

  15. Long term leaching of chlorinated solvents from source zones in low permeability settings with fractures

    DEFF Research Database (Denmark)

    Bjerg, Poul Løgstrup; Chambon, Julie Claire Claudia; Troldborg, Mads

    2008-01-01

    accounting for competitive inhibition between the chlorinated ethenes. The model is constructed using Comsol Multiphysics, a generic finite- element partial differential equation solver. The model is applied at two well characterised field sites with respect to hydrogeology, fracture network, contaminant...... distribution and microbial processes (lab and field experiments). At the study sites (Sortebrovej and Vadsbyvej), the source areas are situated in a clayey till with fractures and interbedded sand lenses. The field sites are both highly contaminated with chlorinated ethenes which impact the underlying sand...... aquifer. Anaerobic dechlorination is taking place, and cis-DCE and VC have been found in significant amounts in the matrix. Full scale remediation using ERD was implemented at Sortebrovej in 2006, and ERD has been suggested as a remedy at Vadsbyvej. Results reveal several interesting findings...

  16. Mars Surveyor '98 MVACS Robotic Arm Control System Design Concepts

    Science.gov (United States)

    Bonitz, Robert G.

    1997-01-01

    This paper describes the control system design concepts for the Mars Volatiles and Climate Surveyor (MVACS) Robotic Arm which supports the scientific investigations to be conducted as part of the Mars Surveyor '98 Lander project. Novel solutions are presented to some of the unique problems encountered in this demanding space application with its tight constraints on mass, power, volume, and computing power.

  17. Fracture characteristics of a soft rock roadway: staged and zoned control

    Energy Technology Data Exchange (ETDEWEB)

    Li Xue-hua; Yao Qiang-ling; Zhang Nong [China University of Mining & Technology, Xuzhou (China). State Key Laboratory of Coal Resource and Mine Safety

    2009-05-15

    An accurate understanding of fracture and cracking in surrounding rock is the key to solving the problem of maintaining a soft-rock roadway. Experimental studies have been done within a typical soft-rock roadway in a coal mine. The components and micro-structural features of the surrounding rock were investigated. The properties of the rocks around the roadway and the process of fracture expansion were tested on site. The results show that crack propagation and run-through are non-uniform and occur in several stages. Key technologies for supporting the roadway by stages in different regions were put forward after considering time effects, local breakdown characteristics and fracture development. Staged concrete spraying, intensive support from anchor bolting (cabling) and control of the grouting process in the surrounding rock are the main parts of strengthened support technology. Practice shows that rock cracking in soft rock surrounding a roadway can be effectively controlled by this support technology. Stability of the rock surrounding the roadway can be achieved. 12 refs., 13 figs., 1 tab.

  18. UNDERSTANDING HARD ROCK HYDROGEOLOGY THROUGH AN EXPERIMENTAL HYDROGEOLOGICAL PARK IN SOUTH INDIA: Site development and investigations on the major role of the fractured zone in crystalline aquifers

    Science.gov (United States)

    Ahmed, S.; Guiheneuf, N.; Boisson, A.; Marechal, J.; Chandra, S.; Dewandel, B.; Perrin, J.

    2012-12-01

    In water stressed south India most of the groundwater used for irrigation is pumped from crystalline rocks aquifers. In those structures groundwater flow dominantly occur in a shallow higher-permeability zone that overlies a deeper lower-permeability zone hosting little flow. The fractured zone of the weathering profile plays an important role for groundwater. In order to understand clearly this impact on water availability and quality changes the Experimental Hydrogeological Park at Choutuppal, Andhra Pradesh, India is developed in the framework of the SORE H+ network. Several hydraulic tests (injection, flowmeter profiles, single-packer tests…) and geophysical measurements (ERT, Borehole logging…) are carried out on the site in order to characterize the depth-dependence of hydrodynamic parameters in the Indian Archean granite. Specific investigation on a borewell through packer tests demonstrate that the most conductive part of the aquifer corresponds to the upper part of the fractured layer, located just below the saprolite bottom, between 15 meters and 20 meters depth. There is no highly conductive fracture beyond 20 meters depth and no indication for any conductive fracture beyond 25 meters depth. Packer tests show that the upper part of the fractured layer (15-20 m depth) is characterized by a good vertical connectivity. On the contrary, the tests carried out below 20 m depth show no vertical connectivity at all. The geometry of the fracture network and associated hydrodynamic parameters are in agreement with the conceptual model of hard-rock aquifers that derive its properties from weathering processes. The general existence of such a highly conductive structure at the top of the fractured zone has a great impact on water prospection and exploitation in such crystalline aquifers.

  19. The metallogenic role of east-west fracture zones in South America with regard to the motion of lithospheric plates (with an example from Brazil)

    Science.gov (United States)

    Kutina, J.; Carter, William D.; Lopez, F.X.

    1978-01-01

    The role of east-west fracture zones in South America is discussed with regard to global fracturing and the motion of lithospheric plates. A set of major NW-trending lineaments has been derived which show a tendency to be spaced equidistantly and may correspond to a set of east-west fractures in the "pre-drift" position of the South American plate. Statistical analysis of linears in the ERTS-mosaics shows that NW-fractures are also among the most important ones in the Andes region, suggesting that the above major lineaments extend into the basement of the Andes. Some of the old major fractures, trending east-west in the present orientation of South America, are discussed and their NE orientation in the pre-drift position of the plate is considered. An example of structural control of ore deposition in the Brazilian Shield is presented, using the maps of the RADAM Project. It is concluded that the small tin-bearing granitic bodies concentrated in the region of Sao Felix do Xingu in the state of Para represent upper parts of an unexposed granitoid massif which is controlled by the intersection of a major east-west fracture zone probably represents westward extension of the Patos Lineament of the easternmost part of Brazil, connected with the east-west fracture zone of the Para state through the basement of the Maranhao Basin (Sineclise do Maranhao-Piaui). It is expected that the proposed "Patos-Para Lineament" extends further westward and may similarly control, at intersections with fractures of other trends, some mineralization centers in the western part of the state of Para and in the state of Amazonas.

  20. Magnesite-bearing fracture zones of the Zlatibor ultrabasic massif (Serbia as a discrete structural-morphological type of magnesite deposits in ultrabasites

    Directory of Open Access Journals (Sweden)

    Ilić Miloje

    2011-01-01

    Full Text Available In this paper, a discrete structural-morphological type of magnesite deposits in ultrabasites, i.e., in magnesite-bearing fracture zones, is presented. The most prominent occurrences of such zones in Serbia are in the Zlatibor ultrabasic massif and they are economically very significant because they contain large reserves of high-quality magnesite, as well as of the accompanying sepiolite.

  1. Fracture analysis of a functionally graded interfacial zone between two dissimilar homogeneous materials

    Institute of Scientific and Technical Information of China (English)

    CHENG Zhanqi; ZHONG Zheng

    2006-01-01

    In this paper the plane elasticity problem for a functionally graded interfacial zone containing a crack between two dissimilar homogeneous materials has been considered. It is assumed that in the interfacial zone the reciprocal of the shear modulus is a linear function of the coordinate, while Possion's ratio keeps constant. By utilizing the Fourier transformation technique and the transfer matrix method, the mixed boundary problem is reduced to a system of singular integral equations that are solved numerically.The influences of the geometric parameters and the graded parameter on the stress intensity factors are investigated. The numerical results show that the graded parameters,the thickness of interfacial zone, the crack size and location have significant effects on the stress intensity factors.

  2. Characterization of fractures and flow zones in a contaminated crystalline-rock aquifer in the Tylerville section of Haddam, Connecticut

    Science.gov (United States)

    Johnson, Carole D.; Kiel, Kristal F.; Joesten, Peter K.; Pappas, Katherine L.

    2016-10-04

    The U.S. Geological Survey, in cooperation with the Connecticut Department of Energy and Environmental Protection, investigated the characteristics of the bedrock aquifer in the Tylerville section of Haddam, Connecticut, from June to August 2014. As part of this investigation, geophysical logs were collected from six water-supply wells and were analyzed to (1) identify well construction, (2) determine the rock type and orientation of the foliation and layering of the rock, (3) characterize the depth and orientation of fractures, (4) evaluate fluid properties of the water in the well, and (5) determine the relative transmissivity and head of discrete fractures or fracture zones. The logs included the following: caliper, electromagnetic induction, gamma, acoustic and (or) optical televiewer, heat-pulse flowmeter under ambient and pumped conditions, hydraulic head data, fluid electrical conductivity and temperature under postpumping conditions, and borehole-radar reflection collected in single-hole mode. In a seventh borehole, a former water-supply well, only caliper, fluid electrical conductivty, and temperature logs were collected, because of a constriction in the borehole.This report includes a description of the methods used to collect and process the borehole geophysical data, the description of the data collected in each of the wells, and a comparison of the results collected in all of the wells. The data are presented in plots of the borehole geophysical logs, tables, and figures. Collectively these data provide valuable characterizations that can be used to improve or inform site conceptual models of groundwater flow in the study area.

  3. The Cosmology Large Angular Scale Surveyor

    Science.gov (United States)

    Marriage, Tobias; Ali, A.; Amiri, M.; Appel, J. W.; Araujo, D.; Bennett, C. L.; Boone, F.; Chan, M.; Cho, H.; Chuss, D. T.; Colazo, F.; Crowe, E.; Denis, K.; Dünner, R.; Eimer, J.; Essinger-Hileman, T.; Gothe, D.; Halpern, M.; Harrington, K.; Hilton, G.; Hinshaw, G. F.; Huang, C.; Irwin, K.; Jones, G.; Karakla, J.; Kogut, A. J.; Larson, D.; Limon, M.; Lowry, L.; Mehrle, N.; Miller, A. D.; Miller, N.; Moseley, S. H.; Novak, G.; Reintsema, C.; Rostem, K.; Stevenson, T.; Towner, D.; U-Yen, K.; Wagner, E.; Watts, D.; Wollack, E.; Xu, Z.; Zeng, L.

    2014-01-01

    Some of the most compelling inflation models predict a background of primordial gravitational waves (PGW) detectable by their imprint of a curl-like "B-mode" pattern in the polarization of the Cosmic Microwave Background (CMB). The Cosmology Large Angular Scale Surveyor (CLASS) is a novel array of telescopes to measure the B-mode signature of the PGW. By targeting the largest angular scales (>2°) with a multifrequency array, novel polarization modulation and detectors optimized for both control of systematics and sensitivity, CLASS sets itself apart in the field of CMB polarization surveys and opens an exciting new discovery space for the PGW and inflation. This poster presents an overview of the CLASS project.

  4. Beyond Chandra - the X-ray Surveyor

    CERN Document Server

    Weisskopf, Martin C; Tananbaum, Harvey; Vikhlinin, Alexey

    2015-01-01

    Over the past 16 years, NASA's Chandra X-ray Observatory has provided an unparalleled means for exploring the universe with its half-arcsecond angular resolution. Chandra studies have deepened our understanding of galaxy clusters, active galactic nuclei, galaxies, supernova remnants, planets, and solar system objects addressing almost all areas of current interest in astronomy and astrophysics. As we look beyond Chandra, it is clear that comparable or even better angular resolution with greatly increased photon throughput is essential to address even more demanding science questions, such as the formation and subsequent growth of black hole seeds at very high redshift; the emergence of the first galaxy groups; and details of feedback over a large range of scales from galaxies to galaxy clusters. Recently, NASA Marshall Space Flight Center, together with the Smithsonian Astrophysical Observatory, has initiated a concept study for such a mission named the X-ray Surveyor. This study starts with a baseline payloa...

  5. The surveyors' quest for perfect alignment

    CERN Multimedia

    2003-01-01

    Photogrammetry of a CMS endcap and part of the hadronic calorimeter.The structure was covered with targets photographed by digital cameras. Perfect alignment.... Although CERN's surveyors do not claim to achieve it, they are constantly striving for it and deploy all necessary means to come as close as they can. In their highly specialised field of large-scale metrology, the solution lies in geodesy and photogrammetry, both of which are based on increasingly sophisticated instruments and systems. In civil engineering, these techniques are used for non-destructive inspection of bridges, dams and other structures, while industrial applications include dimensional verification and deformation measurement in large mechanical assemblies. The same techniques also come into play for the metrology of research tools such as large telescopes and of course, particle accelerators. Particle physics laboratories are especially demanding customers, and CERN has often asked for the impossible. As a result, the alignment metro...

  6. CERN’s surveyors send sparks flying

    CERN Document Server

    Anaïs Schaeffer

    2013-01-01

    A few weeks ago, we published an article on the three-dimensional laser scanner technique used at CERN to produce 3D images of the LHC tunnels and experiments (see the article here). Photogrammetry is another technique in the CERN surveyors’ arsenal.   The ATLAS wheel during a photogrammetry measurement campaign. The white spots (see red arrows) dotted across the wheel are the retro-reflective "dot" targets. Used in a number of fields including topography, architecture, geology and archaeology, photogrammetry is a stereoscopy technique whereby 2D images taken from different angles can be used to reconstruct a 3D image of an object. Surveyors at CERN have been using this technique for over 15 years as a way of gaining precise information on the shape, size, deformation and position of the LHC detectors and their composite elements. The photogrammetry used at CERN is relatively “light” in terms of the equipment required, w...

  7. Deep-reaching fracture zones in the crystalline basement surrounding the West Congo System and their control of mineralization in Angola and Gabon

    NARCIS (Netherlands)

    Boorder, H. de

    1982-01-01

    A framework of major, deep-reaching fracture zones in western Central Africa is inferred from airborne magnetometric and surface geological observations in Central Angola and Gabon. A correlation is proposed between these observations and the continental negative Bouguer anomaly. The minimum age o

  8. Orthorhombic fault fracture patterns and non-plane strain in a synthetic transfer zone during rifting: Lennard shelf, Canning basin, Western Australia

    Science.gov (United States)

    Miller, John McL.; Nelson, E. P.; Hitzman, M.; Muccilli, P.; Hall, W. D. M.

    2007-06-01

    A complex series of faults occur within transfer zones normal to the WNW-trending rifted northern margin of the Canning basin (Western Australia). These zones controlled basinal fluid flow and the formation of some carbonate-hosted Mississippi Valley-type Zn-Pb deposits along the basin margin during Devonian to Carboniferous rifting. The study area has a regional fault geometry similar to a synthetic overlapping transfer zone. Surface and underground mapping in this transfer zone, combined with 3D modelling, indicate the faults and related extension fractures have an orthorhombic geometry. The orthorhombic fault-fracture mesh developed in response to three-dimensional non-plane strain in which the intermediate finite extension magnitude was non-zero. Pre-mineralisation marine calcite fill in the fault-fracture mesh indicates that it formed early in the deformation history. Later deformation that overprints the Zn-Pb mineralisation and fault-fracture mesh, was associated with a different maximum extension direction and this modified and reactivated the faults with both dip-slip and oblique-slip movement and tilting of earlier structures. The orthorhombic geometry is not observed at a regional scale (>10 × 10 km), indicating probable scale-dependant behaviour. This study indicates that this transfer zone developed either by (1) strain partitioning with synchronous strike-slip structures and adjacent zones of non-plane extension, or (2) by a component of non-plane extension sub-parallel to the basin margin followed by subsequent transtensional overprint of the system (preferred model). Synthetic overlapping transfer zones are inferred to be key regions where orthorhombic fault geometries may develop.

  9. Improvement of denitrification rates in confined zones of fractured subsoils under continuous wastewater injection.

    Science.gov (United States)

    Carrieri, Carmelo; Masciopinto, Costantino

    2003-01-01

    An attempt to improve the natural biodegradation rate in a fractured aquifer (Nardò (Le), Southern Italy) subject since '91 to the injection of 12,000 m3/d of treated municipal wastewater, has been carried out through tests on pilot plants. The lab experiments showed that a complete nitrogen removal can be realized after 10 d of infiltration in fractures by adding whey in the influent waste. The lab results have been used in a mathematical model in order to simulate ground water quality changes caused by the addition of whey in the injecting water. The analytical parameters of ground water sampled in monitoring wells located at different distances from the injection site, have been compared with mathematical model results. Moreover for preserving such resource from pollution, the mathematical model allowed two areas, around the injection site to be drawn. These areas, where withdrawals would be prohibited, are required to avoid infections by pathogens and bacteria in ground water due to incomplete biodegradation processes. The experimental results can be useful to identify standardized methodology for artificial ground water recharge which could be required for aquifer clean up (Water Frame Directive 2000/60).

  10. Statistical model of fractures and deformation zones. Preliminary site description, Laxemar subarea, version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hermanson, Jan; Forssberg, Ola [Golder Associates AB, Stockholm (Sweden); Fox, Aaron; La Pointe, Paul [Golder Associates Inc., Redmond, WA (United States)

    2005-10-15

    The goal of this summary report is to document the data sources, software tools, experimental methods, assumptions, and model parameters in the discrete-fracture network (DFN) model for the local model volume in Laxemar, version 1.2. The model parameters presented herein are intended for use by other project modeling teams. Individual modeling teams may elect to simplify or use only a portion of the DFN model, depending on their needs. This model is not intended to be a flow model or a mechanical model; as such, only the geometrical characterization is presented. The derivations of the hydraulic or mechanical properties of the fractures or their subsurface connectivities are not within the scope of this report. This model represents analyses carried out on particular data sets. If additional data are obtained, or values for existing data are changed or excluded, the conclusions reached in this report, and the parameter values calculated, may change as well. The model volume is divided into two subareas; one located on the Simpevarp peninsula adjacent to the power plant (Simpevarp), and one further to the west (Laxemar). The DFN parameters described in this report were determined by analysis of data collected within the local model volume. As such, the final DFN model is only valid within this local model volume and the modeling subareas (Laxemar and Simpevarp) within.

  11. Forecasting the manpower demand for quantity surveyors in Hong Kong

    Directory of Open Access Journals (Sweden)

    Paul H K Ho

    2013-09-01

    Full Text Available Recently, there has been a massive infrastructure development and an increasing demand for public and private housing, resulting in a shortage of qualified quantity surveyors. This study aims to forecast the demand for qualified quantity surveyors in Hong Kong from 2013 to 2015. Literature review indicates that the demand for quantity surveyors is a function of the gross values of building, civil engineering and maintenance works. The proposed forecasting method consists of two steps. The first step is to estimate the gross values of building, civil engineering and maintenance works by time series methods and the second step is to forecast the manpower demand for quantity surveyors by causal methods. The data for quantity surveyors and construction outputs are based on the ‘manpower survey reports of the building and civil engineering industry’ and the ‘gross value of construction works performed by main contractors’ respectively. The forecasted manpower demand for quantity surveyors in 2013, 2014 and 2015 are 2,480, 2,632 and 2,804 respectively. Due to the low passing rate of the assessment of professional competence (APC and the increasing number of retired qualified members, there will be a serious shortage of qualified quantity surveyors in the coming three years.

  12. Forecasting the manpower demand for quantity surveyors in Hong Kong

    Directory of Open Access Journals (Sweden)

    Paul H K Ho

    2013-09-01

    Full Text Available Recently, there has been a massive infrastructure development and an increasing demand for public and private housing, resulting in a shortage of qualified quantity surveyors. This study aims to forecast the demand for qualified quantity surveyors in Hong Kong from 2013 to 2015. Literature review indicates that the demand for quantity surveyors is a function of the gross values of building, civil engineering and maintenance works. The proposed forecasting method consists of two steps. The first step is to estimate the gross values of building, civil engineering and maintenance works by time series methods and the second step is to forecast the manpower demand for quantity surveyors by causal methods. The data for quantity surveyors and construction outputs are based on the ‘manpower survey reports of the building and civil engineering industry’ and the ‘gross value of construction works performed by main contractors’ respectively. The forecasted manpower demand for quantity surveyors in 2013, 2014 and 2015 are 2,480, 2,632 and 2,804 respectively. Due to the low passing rate of the assessment of professional competence (APC and the increasing number of retired qualified members, there will be a serious shortage of qualified quantity surveyors in the coming three years.

  13. A comprehensive model combining Laplace-transform finite-difference and boundary-element method for the flow behavior of a two-zone system with discrete fracture network

    Science.gov (United States)

    Jia, Pin; Cheng, Linsong; Huang, Shijun; Xu, Zhongyi; Xue, Yongchao; Cao, Renyi; Ding, Guanyang

    2017-08-01

    This paper provides a comprehensive model for the flow behavior of a two-zone system with discrete fracture network. The discrete fracture network within the inner zone is represented explicitly by fracture segments. The Laplace-transform finite-difference method is used to numerically model discrete fracture network flow, with sufficient flexibility to consider arbitrary fracture geometries and conductivity distributions. Boundary-element method and line-source functions in the Laplace domain are employed to derive a semi-analytical flow solution for the two-zone system. By imposing the continuity of flux and pressure on discrete fracture surfaces, the semi-analytical two-zone system flow model and the numerical fracture flow model are coupled dynamically. The main advantage of the approach occurring in the Laplace domain is that simulation can be done with nodes only for discrete fractures and elements for boundaries and at predetermined, discrete times. Thus, stability and convergence problems caused by time discretization are avoided and the burden of gridding and computation is decreased without loss of important fracture characteristics. The model is validated by comparison with the results from an analytical solution and a fully numerical solution. Flow regime analysis shows that a two-zone system with discrete fracture network may develop six flow regimes: fracture linear flow, bilinear flow, inner zone linear flow, inner zone pseudosteady-state flow, outer zone pseudoradial flow and outer zone boundary-dominated flow. Especially, local solutions for the inner-zone linear flow have the same form with that of a finite conductivity planar fracture and can be correlated with the total length of discrete fractures and an intercept term. In the inner zone pseudosteady-state flow period, the discrete fractures, along with the boundary of the inner zone, will act as virtual closed boundaries, due to the pressure interference caused by fracture network and the

  14. The surveyors get the measure of the LHC

    CERN Multimedia

    2002-01-01

    The first to start work in the LHC tunnel, the surveyors are precisely marking out the positions of the future accelerator's magnets. A total of 7000 reference points will have to be marked out over two years.

  15. an examination of estate surveyors and valuers' perception of flood ...

    African Journals Online (AJOL)

    Osondu

    2013-11-27

    Nov 27, 2013 ... Key words: Estate Surveyors, Perception, Flood risk, Residential ... financial service sector (banking, insurance, etc.) ... 1Department of Estate Management, College of Science .... institutions (Ayida-Otobo, 2009), Lagos State.

  16. Research Ship Southern Surveyor Underway Meteorological Data, Quality Controlled

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Research Ship Southern Surveyor Underway Meteorological Data (delayed ~10 days for quality control) are from the Shipboard Automated Meteorological and Oceanographic...

  17. Application of chaos analyses methods on East Anatolian Fault Zone fractures

    Energy Technology Data Exchange (ETDEWEB)

    Kamışlıoğlu, Miraç, E-mail: m.kamislioglu@gmail.com; Külahcı, Fatih, E-mail: fatihkulahci@firat.edu.tr [Nuclear Physics Division, Department of Physics, Faculty of Science, Fırat University, Elazig, TR-23119 (Turkey)

    2016-06-08

    Nonlinear time series analysis techniques have large application areas on the geoscience and geophysics fields. Modern nonlinear methods are provided considerable evidence for explain seismicity phenomena. In this study nonlinear time series analysis, fractal analysis and spectral analysis have been carried out for researching the chaotic behaviors of release radon gas ({sup 222}Rn) concentration occurring during seismic events. Nonlinear time series analysis methods (Lyapunov exponent, Hurst phenomenon, correlation dimension and false nearest neighbor) were applied for East Anatolian Fault Zone (EAFZ) Turkey and its surroundings where there are about 35,136 the radon measurements for each region. In this paper were investigated of {sup 222}Rn behavior which it’s used in earthquake prediction studies.

  18. Predictions of mixed mode interface crack growth using a cohesive zone model for ductile fracture

    DEFF Research Database (Denmark)

    Tvergaard, Viggo

    2004-01-01

    Special interface elements that account for ductile failure by the nucleation and growth of voids to coalescence are used to analyse crack growth. In these elements the stress component tangential to the interface is accounted for, as determined by the requirement of compatibility with the surrou......Special interface elements that account for ductile failure by the nucleation and growth of voids to coalescence are used to analyse crack growth. In these elements the stress component tangential to the interface is accounted for, as determined by the requirement of compatibility...... with the surrounding material in the tangential direction. Thus, the present interface description incorporates the important effect of stress triaxiality on damage evolution, which is not part of the usual cohesive zone models. The interface elements have been used previously for mode I loading conditions...... Elsevier Ltd. All rights reserved....

  19. The Cosmology Large Angular Scale Surveyor

    CERN Document Server

    Harrington, Kathleen; Ali, Aamir; Appel, John W; Bennett, Charles L; Boone, Fletcher; Brewer, Michael; Chan, Manwei; Chuss, David T; Colazo, Felipe; Dahal, Sumit; Denis, Kevin; Dünner, Rolando; Eimer, Joseph; Essinger-Hileman, Thomas; Fluxa, Pedro; Halpern, Mark; Hilton, Gene; Hinshaw, Gary F; Hubmayr, Johannes; Iuliano, Jeffery; Karakla, John; McMahon, Jeff; Miller, Nathan T; Moseley, Samuel H; Palma, Gonzalo; Parker, Lucas; Petroff, Matthew; Pradenas, Bastián; Rostem, Karwan; Sagliocca, Marco; Valle, Deniz; Watts, Duncan; Wollack, Edward; Xu, Zhilei; Zeng, Lingzhen

    2016-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) is a four telescope array designed to characterize relic primordial gravitational waves from inflation and the optical depth to reionization through a measurement of the polarized cosmic microwave background (CMB) on the largest angular scales. The frequencies of the four CLASS telescopes, one at 38 GHz, two at 93 GHz, and one dichroic system at 145/217 GHz, are chosen to avoid spectral regions of high atmospheric emission and span the minimum of the polarized Galactic foregrounds: synchrotron emission at lower frequencies and dust emission at higher frequencies. Low-noise transition edge sensor detectors and a rapid front-end polarization modulator provide a unique combination of high sensitivity, stability, and control of systematics. The CLASS site, at 5200 m in the Chilean Atacama desert, allows for daily mapping of up to 70\\% of the sky and enables the characterization of CMB polarization at the largest angular scales. Using this combination of a broad f...

  20. CLASS: The Cosmology Large Angular Scale Surveyor

    CERN Document Server

    Essinger-Hileman, Thomas; Amiri, Mandana; Appel, John W; Araujo, Derek; Bennett, Charles L; Boone, Fletcher; Chan, Manwei; Cho, Hsiao-Mei; Chuss, David T; Colazo, Felipe; Crowe, Erik; Denis, Kevin; Dünner, Rolando; Eimer, Joseph; Gothe, Dominik; Halpern, Mark; Harrington, Kathleen; Hilton, Gene; Hinshaw, Gary F; Huang, Caroline; Irwin, Kent; Jones, Glenn; Karakla, John; Kogut, Alan J; Larson, David; Limon, Michele; Lowry, Lindsay; Marriage, Tobias; Mehrle, Nicholas; Miller, Amber D; Miller, Nathan; Moseley, Samuel H; Novak, Giles; Reintsema, Carl; Rostem, Karwan; Stevenson, Thomas; Towner, Deborah; U-Yen, Kongpop; Wagner, Emily; Watts, Duncan; Wollack, Edward; Xu, Zhilei; Zeng, Lingzhen

    2014-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) is an experiment to measure the signature of a gravita-tional-wave background from inflation in the polarization of the cosmic microwave background (CMB). CLASS is a multi-frequency array of four telescopes operating from a high-altitude site in the Atacama Desert in Chile. CLASS will survey 70\\% of the sky in four frequency bands centered at 38, 93, 148, and 217 GHz, which are chosen to straddle the Galactic-foreground minimum while avoiding strong atmospheric emission lines. This broad frequency coverage ensures that CLASS can distinguish Galactic emission from the CMB. The sky fraction of the CLASS survey will allow the full shape of the primordial B-mode power spectrum to be characterized, including the signal from reionization at low $\\ell$. Its unique combination of large sky coverage, control of systematic errors, and high sensitivity will allow CLASS to measure or place upper limits on the tensor-to-scalar ratio at a level of $r=0.01$ and make a cosmi...

  1. CLASS: The Cosmology Large Angular Scale Surveyor

    Science.gov (United States)

    Essinger-Hileman, Thomas; Ali, Aamir; Amiri, Mandana; Appel, John W.; Araujo, Derek; Bennett, Charles L.; Boone, Fletcher; Chan, Manwei; Cho, Hsiao-Mei; Chuss, David T.; Colazo, Felipe; Crowe, Erik; Denis, Kevin; Dunner, Rolando; Eimer, Joseph; Gothe, Dominik; Halpern, Mark; Kogut, Alan J.; Miller, Nathan; Moseley, Samuel; Rostem, Karwan; Stevenson, Thomas; Towner, Deborah; U-Yen, Kongpop; Wollack, Edward

    2014-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) is an experiment to measure the signature of a gravitational wave background from inflation in the polarization of the cosmic microwave background (CMB). CLASS is a multi-frequency array of four telescopes operating from a high-altitude site in the Atacama Desert in Chile. CLASS will survey 70% of the sky in four frequency bands centered at 38, 93, 148, and 217 GHz, which are chosen to straddle the Galactic-foreground minimum while avoiding strong atmospheric emission lines. This broad frequency coverage ensures that CLASS can distinguish Galactic emission from the CMB. The sky fraction of the CLASS survey will allow the full shape of the primordial B-mode power spectrum to be characterized, including the signal from reionization at low-length. Its unique combination of large sky coverage, control of systematic errors, and high sensitivity will allow CLASS to measure or place upper limits on the tensor-to-scalar ratio at a level of r = 0:01 and make a cosmic-variance-limited measurement of the optical depth to the surface of last scattering, tau. (c) (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  2. The Cosmology Large Angular Scale Surveyor (CLASS)

    Science.gov (United States)

    Harrington, Kathleen; Marriange, Tobias; Aamir, Ali; Appel, John W.; Bennett, Charles L.; Boone, Fletcher; Brewer, Michael; Chan, Manwei; Chuss, David T.; Colazo, Felipe; Denis, Kevin; Moseley, Samuel H.; Rostem, Karwan; Wollack, Edward

    2016-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) is a four telescope array designed to characterize relic primordial gravitational waves from in ation and the optical depth to reionization through a measurement of the polarized cosmic microwave background (CMB) on the largest angular scales. The frequencies of the four CLASS telescopes, one at 38 GHz, two at 93 GHz, and one dichroic system at 145/217 GHz, are chosen to avoid spectral regions of high atmospheric emission and span the minimum of the polarized Galactic foregrounds: synchrotron emission at lower frequencies and dust emission at higher frequencies. Low-noise transition edge sensor detectors and a rapid front-end polarization modulator provide a unique combination of high sensitivity, stability, and control of systematics. The CLASS site, at 5200 m in the Chilean Atacama desert, allows for daily mapping of up to 70% of the sky and enables the characterization of CMB polarization at the largest angular scales. Using this combination of a broad frequency range, large sky coverage, control over systematics, and high sensitivity, CLASS will observe the reionization and recombination peaks of the CMB E- and B-mode power spectra. CLASS will make a cosmic variance limited measurement of the optical depth to reionization and will measure or place upper limits on the tensor-to-scalar ratio, r, down to a level of 0.01 (95% C.L.).

  3. The CAMbridge Emission Line Surveyor (CAMELS)

    CERN Document Server

    Thomas, C N; Maiolino, R; Goldie, D J; Acedo, E de Lera; Wagg, J; Blundell, R; Paine, S; Zeng, L

    2014-01-01

    The CAMbridge Emission Line Surveyor (CAMELS) is a pathfinder program to demonstrate on-chip spectrometry at millimetre wavelengths. CAMELS will observe at frequencies from 103-114.7 GHz, providing 512 channels with a spectral resolution of R = 3000. In this paper we describe the science goals of CAMELS, the current system level design for the instrument and the work we are doing on the detailed designs of the individual components. In addition, we will discuss our efforts to understand the impact that the design and calibration of the filter bank on astronomical performance. The shape of the filter channels, the degree of overlap and the nature of the noise all effect how well the parameters of a spectral line can be recovered. We have developed a new and rigorous method for analysing performance, based on the concept of Fisher information. This can in be turn coupled to a detailed model of the science case, allowing design trade-offs to be properly investigated.

  4. Big Data, data integrity, and the fracturing of the control zone

    Directory of Open Access Journals (Sweden)

    Carl Lagoze

    2014-11-01

    Full Text Available Despite all the attention to Big Data and the claims that it represents a “paradigm shift” in science, we lack understanding about what are the qualities of Big Data that may contribute to this revolutionary impact. In this paper, we look beyond the quantitative aspects of Big Data (i.e. lots of data and examine it from a sociotechnical perspective. We argue that a key factor that distinguishes “Big Data” from “lots of data” lies in changes to the traditional, well-established “control zones” that facilitated clear provenance of scientific data, thereby ensuring data integrity and providing the foundation for credible science. The breakdown of these control zones is a consequence of the manner in which our network technology and culture enable and encourage open, anonymous sharing of information, participation regardless of expertise, and collaboration across geographic, disciplinary, and institutional barriers. We are left with the conundrum—how to reap the benefits of Big Data while re-creating a trust fabric and an accountable chain of responsibility that make credible science possible.

  5. Miocene uplift of the NE Greenland margin linked to plate tectonics: Seismic evidence from the Greenland Fracture Zone, NE Atlantic

    DEFF Research Database (Denmark)

    Døssing Andreasen, Arne; Japsen, Peter; Watts, Anthony B.

    2016-01-01

    Tectonic models predict that, following breakup, rift margins undergo only decaying thermal subsidence during their post-rift evolution. However, post-breakup stratigraphy beneath the NE Atlantic shelves shows evidence of regional-scale unconformities, commonly cited as outer margin responses to ...... by plate tectonic forces, induced perhaps by a change in the Iceland plume (a hot pulse) and/or by changes in intra-plate stresses related to global tectonics.......Tectonic models predict that, following breakup, rift margins undergo only decaying thermal subsidence during their post-rift evolution. However, post-breakup stratigraphy beneath the NE Atlantic shelves shows evidence of regional-scale unconformities, commonly cited as outer margin responses...... to inner margin episodic uplift, including the formation of coastal mountains. The origin of these events remains enigmatic. We present a seismic reflection study from the Greenland Fracture Zone – East Greenland Ridge (GFZ-EGR) and the NE Greenland shelf. We document a regional intra-Miocene seismic...

  6. Sub-seafloor acoustic characterization of seamounts near the Ogasawara Fracture Zone in the western Pacific using chirp (3-7 kHz) subbottom profiles

    Science.gov (United States)

    Lee, T.-G.; Hein, J.R.; Lee, Kenneth; Moon, J.-W.; Ko, Y.-T.

    2005-01-01

    A detailed analysis of chirp (3-7 kHz) subbottom profiles and bathymetry was performed on data collected from seamounts near the Ogasawara Fracture Zone (OFZ) in the western Pacific. The OFZ, which is a 150 km wide rift zone showing 600 km of right-lateral movement in a NW-SE direction, is unique among the fracture zones of the Pacific in that it includes many old seamounts (e.g., Magellan Seamounts and seamounts on Dutton Ridge). Sub-seafloor acoustic echoes on the seamounts are classified into nine specific types based on the nature and continuity of the echoes, subbottom structure, and morphology of the seafloor: (1) distinct echoes (types I-1, I-2, I-3), (2) indistinct echoes (types II-1, II-2, II-3), and (3) hyperbolic echoes (types III-1, III-2, III-3). Type I-2 pelagic sediments, characterized by thin and intermittent coverage, were probably deposited in topographically sheltered areas when bottom currents were strong, whereas type I-1 pelagic sediments accumulated during continuous and widespread sedimentation. Development of seamount flank rift zones in the OFZ may have been influenced by preexisting structures in the transform fracture zone at the time of volcanism, whereas those on Ita Mai Tai seamount in the Pigafetta Basin originated solely by edifice-building processes. Flank rift zones that formed by dike intrusions and eruptions played an important role in mass wasting. Mass-wasting processes included block faulting or block slides around the summit margin, sliding/slumping, debris flows, and turbidites, which may have been triggered by faulting, volcanism, dike injection, and weathering during various stages in the evolution of the seamounts. ?? 2005 Elsevier Ltd. All rights reserved.

  7. Fracture assessment of laser welde joints using numerical crack propagation simulation with a cohesive zone model; Bruchmechanische Bewertung von Laserschweissverbindungen durch numerische Rissfortschrittsimulation mit dem Kohaesivzonenmodell

    Energy Technology Data Exchange (ETDEWEB)

    Scheider, I.

    2001-07-01

    This thesis introduces a concept for fracture mechanical assessment of structures with heterogenuous material properties like weldments. It is based on the cohesive zone model for numerical crack propagation analysis. With that model the failure of examined structures due to fracture can be determined. One part of the thesis contains the extension of the capabilities of the cohesive zone model regarding modelling threedimensional problems, shear fracture and unloading. In a second part new methods are developed for determination of elastic-plastic and fracture mechanical material properties, resp., which are based on optical determination of the specimen deformation. The whole concept has been used successfully for the numerical simulation of small laser welded specimens. (orig.) [German] In der vorliegenden Arbeit wird ein Konzept vorgestellt, mit dem es moeglich ist, Bauteile mit heterogenen Materialeigenschaften, wie z.B. Schweissverbindungen, bruchmechanisch zu bewerten. Es basiert auf einem Modell zur numerischen Rissfortschrittsimulation, dem Kohaesivzonenmodell, um das Versagen des zu untersuchenden Bauteils infolge von Bruch zu bestimmen. Ein Teil der Arbeit umfasst die Weiterentwicklung des Kohaesivzonenmodells zur Vorhersage des Bauteilversagens in Bezug auf die Behandlung dreidimensionaler Probleme, Scherbuch und Entlastung. In einem zweiten Teil werden Methoden zur Bestimmung sowohl der elastischplastischen als auch der bruchmechanischen Materialparameter entwickelt, die zum grossen Teil auf optischen Auswertungsmethoden der Deformationen beruhen. Das geschlossene Konzept wird erfolgreich auf lasergeschweisste Kleinproben angewendet. (orig.)

  8. Processes controlling the migration and biodegradation of Non-aqueous phase liquids (NAPLs) within fractured rocks in the vadose zone FY97 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Geller, J.T.; Holman, Hoi-Ying; Conrad, M. [and others

    1998-02-01

    Subsurface contamination from volatile organic compounds (VOCs) has been found at many Department of Energy (DOE), Department of Defense (DoD) and industrial sites due to the widespread use of organic solvents and hydrocarbon fuels. At ambient pressures and temperatures in the shallow subsurface, these substances are liquids that are immiscible with water; hence they are commonly designated as non-aqueous phase liquids (NAPLs). At some DOE sites, NAPLs are the presumed source of groundwater contamination in fractured rocks, such as basalts (at Hanford and Idaho National Engineering and Environmental Laboratory (INEEL)), shales (Oak Ridge Y-12 Plant), and welded tuffs (Los Alamos National Laboratory (LANL)). The flow, transport and biodegradation processes controlling NAPL behavior in the vadose zone must be understood in order to establish the possible extent of contamination, the risk to groundwater supplies, and appropriate remediation action. This is particularly important in and sites with deep water tables (such as at Hanford, INEEL and LANL). In fractured rock aquifers, NAPL migration is likely to be dominated by the highly permeable pathways provided by rock fractures and joints. Two- and three-phase fluid phases may be present in vadose zone fractures, including NAPL-gas, NAPL-water (in regions of perched water) and NAPL-water-gas.

  9. Metalliferous sediment and a silica-hematite deposit within the Blanco fracture zone, Northeast Pacific

    Science.gov (United States)

    Hein, J.R.; Clague, D.A.; Koski, R.A.; Embley, R.W.; Dunham, R.E.

    2008-01-01

    A Tiburon ROV dive within the East Blanco Depression (EBD) increased the mapped extent of a known hydrothermal field by an order of magnitude. In addition, a unique opal-CT (cristobalite-tridymite)-hematite mound was discovered, and mineralized sediments and rock were collected and analyzed. Silica-hematite mounds have not previously been found on the deep ocean floor. The light-weight rock of the porous mound consists predominantly of opal-CT and hematite filaments, rods, and strands, and averages 77.8% SiO2 and 11.8% Fe2O3. The hematite and opal-CT precipitated from a low-temperature (???115?? C), strongly oxidized, silica- and iron-rich, sulfur-poor hydrothermal fluid; a bacterial mat provided the framework for precipitation. Samples collected from a volcaniclastic rock outcrop consist primarily of quartz with lesser plagioclase, smectite, pyroxene, and sulfides; SiO2 content averages 72.5%. Formation of these quartz-rich samples is best explained by cooling in an up-flow zone of silica-rich hydrothermal fluids within a low permeability system. Opal-A, opal-CT, and quartz mineralization found in different places within the EBD hydrothermal field likely reflects decreasing silica saturation and increasing temperature of the mineralizing fluid with increasing silica crystallinity. Six push cores recovered gravel, coarse sand, and mud mineralized variously by Fe or Mn oxides, silica, and sulfides. Total rare-earth element concentrations are low for both the rock and push core samples. Ce and Eu anomalies reflect high and low temperature hydrothermal components and detrital phases. A remarkable variety of types of mineralization occur within the EBD field, yet a consistent suite of elements is enriched (relative to basalt and unmineralized cores) in all samples analyzed: Ag, Au, S, Mo, Hg, As, Sb, Sr, and U; most samples are also enriched in Cu, Pb, Cd, and Zn. On the basis of these element enrichments, the EBD hydrothermal field might best be described as a base

  10. The effect of stagnant water zones on retarding radionuclide stransport in fractured rocks: An extension to the Channel Network Model

    Science.gov (United States)

    Shahkarami, Pirouz; Liu, Longcheng; Moreno, Luis; Neretnieks, Ivars

    2016-09-01

    An essential task of performance assessment of radioactive waste repositories is to predict radionuclide release into the environment. For such a quantitative assessment, the Channel Network Model and the corresponding computer program, CHAN3D, have been used to simulate radionuclide transport in crystalline bedrocks. Recent studies suggest, however, that the model may tend to underestimate the rock retarding capability, because it ignores the presence of stagnant water zones, STWZs, situated in the fracture plane. Once considered, the STWZ can provide additional surface area over which radionuclides diffuse into the rock matrix and thereby contribute to their retardation. The main objective of this paper is to extend the Channel Network Model and its computer implementation to account for diffusion into STWZs and their adjacent rock matrices. In the first part of the paper, the overall impact of STWZs in retarding radionuclide transport is investigated through a deterministic calculation of far-field releases at Forsmark, Sweden. Over the time-scale of the repository safety assessments, radionuclide breakthrough curves are calculated for increasing STWZ width. It is shown that the presence of STWZs enhances the retardation of most long-lived radionuclides except for 36Cl and 129I. The rest of the paper is devoted to the probabilistic calculation of radionuclide transport in fractured rocks. The model that is developed for transport through a single channel is embedded into the Channel Network Model and new computer codes are provided for the CHAN3D. The program is used to (I) simulate the tracer test experiment performed at Äspö HRL, STT-1 and (II) investigate the short- and long-term effect of diffusion into STWZs. The required data for the model are obtained from detailed hydraulic tests in boreholes intersecting the rock mass where the tracer tests were made. The simulation results fairly well predict the release of the sorbing tracer 137Cs. It is found that

  11. How Deep is the Critical Zone: A Scientific Question with Potential Impact For Decision-makers in Areas of Shale-Gas Development and Hydraulic Fracturing

    Science.gov (United States)

    Brantley, S. L.

    2014-12-01

    Citizens living in areas of shale-gas development such as the Marcellus gas play in Pennsylvania and surrounding states are cognizant of the possibility that drilling and production of natural gas -- including hydraulic fracturing -- may have environmental impacts on their water. The Critical Zone is defined as the zone from vegetation canopy to the lower limits of groundwater. This definition is nebulous in terms of the lower limit, and yet, defining the bottom of the Critical Zone is important if citizens are to embrace shale-gas development. This is because, although no peer-reviewed study has been presented that documents a case where hydraulic fracturing or formation fluids have migrated upwards from fracturing depths to drinking water resources, a few cases of such leakage have been alleged. On the other hand, many cases of methane migration into aquifers have been documented to occur and some have been attributed to shale-gas development. The Critical Zone science community has a role to play in understanding such contamination problems, how they unfold, and how they should be ameliorated. For example, one big effort of the Critical Zone science community is to promote sharing of data describing the environment. This data effort has been extended to provide data for citizens to understand water quality by a team known as the Shale Network. As scientists learn to publish data online, these efforts must also be made accessible to non-scientists. As citizens access the data, the demand for data will grow and all branches of government will eventually respond by providing more accessible data that will help the public and policy-makers make decisions.

  12. Enhancement of Seismic Data Processing and Interpretation of Fracture Zones on the Upper Part of Granitic Basement in Cuu Long Basin, Vietnam

    Science.gov (United States)

    Tan, Mai Thanh; Ha, Mai Thanh; Marfurt, Kurt J.; Hieu, Nguyen Trung; Hanh, Nguyen Thi My

    2016-12-01

    The fractured granite basement is the primary oil and gas reservoir in the Cuu Long Basin, Vietnam. Due to the complexity of this non-layered unconventional target, combined with complicated fault and fracture systems, the seismic data quality near and within the basement section is very low. For this reason, it is important to apply improved seismic data processing workflows, filtering and migration techniques, as wells as attribute processing methods to enhance the imaging quality. Our studies show that applying different types of filters, including the f-k, Radon transform and Tau-P, improves signal to noise ratio, removing multiples, revealing basement's top and its related fractured and fault zones. In addition, the application of multi-arrival-solution migration algorithms, such as Kirchhoff Migration and Controlled Beam Migration, provides improved imaging for identifying basement top and faults and fractures within the basement. Furthermore, the application of seismic attributes such as curvature, apparent dip, or energy gradient, is important in locating faults and fractures, whereas mapping of intensity and orientation of such structures assists the delineation of "sweet spots" and assists the planning of exploration.

  13. Miocene uplift of the NE Greenland margin linked to plate tectonics: Seismic evidence from the Greenland Fracture Zone, NE Atlantic.

    Science.gov (United States)

    Døssing, Arne; Japsen, Peter; Watts, Anthony; Nielsen, Tove; Jokat, Wilfried; Thybo, Hans

    2016-04-01

    Tectonic models predict that, following breakup, rift margins undergo only decaying thermal subsidence during their post-rift evolution. However, post-breakup stratigraphy beneath the NE Atlantic shelves shows evidence of regional-scale unconformities, commonly cited as outer margin responses to inner margin episodic uplift, including the formation of coastal mountains. The origin of these events remains enigmatic. We present a seismic reflection study from the Greenland Fracture Zone - East Greenland Ridge (GFZ-EGR) and the NE Greenland shelf. We document a regional intra-Miocene seismic unconformity (IMU), which marks the termination of syn-rift deposition in the deep-sea basins and onset of: (i) thermo-mechanical coupling across the GFZ, (ii) basin compression, and (iii) contourite deposition, north of the EGR. The onset of coupling across the GFZ is constrained by results of 2-D flexural backstripping. We explain the thermo-mechanical coupling and the deposition of contourites by the formation of a continuous plate boundary along the Mohns and Knipovich ridges, leading to an accelerated widening of the Fram Strait. We demonstrate that the IMU event is linked to onset of uplift and massive shelf-progradation on the NE Greenland margin. Given an estimated middle-to-late Miocene (~15-10 Ma) age of the IMU, we speculate that the event is synchronous with uplift of the East and West Greenland margins. The correlation between margin uplift and plate-motion changes further indicates that the uplift was triggered by plate tectonic forces, induced perhaps by a change in the Iceland plume (a hot pulse) and/or by changes in intra-plate stresses related to global tectonics.

  14. Crustal magnetization and accretion at the Southwest Indian Ridge near the Atlantis II fracture zone, 0-25 Ma

    Science.gov (United States)

    Hosford, A.; Tivey, M.; Matsumoto, T.; Dick, H.; Schouten, Hans; Kinoshita, H.

    2003-01-01

    We analyze geophysical data that extend from 0 to 25-Myr-old seafloor on both flanks of the Southwest Indian Ridge (SWIR). Lineated marine magnetic anomalies are consistent and identifiable within the study area, even over seafloor lacking a basaltic upper crust. The full spreading rate of 14 km/Myr has remained nearly constant since at least 20 Ma, but crustal accretion has been highly asymmetric, with half rates of 8.5 and 5.5 km/Myr on the Antarctic and African flanks, respectively. This asymmetry may be unique to a ???400 km wide corridor between large-offset fracture zones of the SWIR. In contrast to the Mid-Atlantic Ridge, crustal magnetization amplitudes correlate directly with seafloor topography along the present-day rift valleys. This pattern appears to be primarily a function of along-axis variations in crustal thickness, rather than magnetic mineralogy. Off-axis, magnetization amplitudes at paleo-segment ends are more positive than at paleo-segment midpoints, suggesting the presence of an induced component of magnetization within the lower crust or serpentinized upper mantle. Alteration of the magnetic source layer at paleo-segment midpoints reduces magnetization amplitudes by 70-80% within 20 Myr of accretion. Magnetic and Ocean Drilling Program (ODP) Hole 735B data suggest that the lower crust cooled quickly enough to lock in a primary thermoremanent magnetization that is in phase with that of the overlying upper crust. Thus magnetic polarity boundaries within the intrusive lower crust may be steeper than envisioned in prior models of ocean crustal magnetization. As the crust ages, the lower crust becomes increasingly important in preserving marine magnetic stripes.

  15. Integrating gamma log and conventional electrical logs to improve identification of fracture zones in hard rocks for hydrofracturing: a case study from Ghana

    Science.gov (United States)

    Amartey, E. O.; Akiti, T. T.; Armah, T.; Osae, S.; Agyekum, W. A.

    2016-07-01

    Hydrofracturing of low-yielding boreholes in hard rocks is a widely used technique in Africa for improvement of yield, thus making them qualified for installation of a hand-pump for domestic water supply. However, the success rate of the hydrofracturing campaigns seems not to be that high as generally claimed by contractors. One reason amongst others might be that the selection of zones for hydrofracturing in the individual borehole is based on pre-hydrofracturing investigation using conventional electrical logs only. Thereby, the zones selected are the occurring resistivity minima interpreted as weak zones with some fracturing. However, resistivity minima can also be caused solely by lithological reasons, which then in most cases could have been seen on a gamma log as corresponding increased gamma radiation. The advantages of using gamma logging in combination with conventional electrical logging technique for prediction of fractured zones in basement rocks is illustrated by investigations of three low-yielding boreholes located in different geological environments in crystalline basement rocks in Ghana.

  16. Fold-related fractures - a brittle tectonic case study of the Helvetic zone in Vorarlberg (western Austria) and Upper Allgäu (Bavaria)

    Science.gov (United States)

    Zerlauth, M.

    2012-04-01

    Michael Zerlauth1,2 , Marcel Schulz1,2 , Hugo Ortner1 , Bernhard Fügenschuh1, Christian Zangerl2 1 Institut für Geologie und Paläontologie, Leopold Franzens Universität, 6020 Innsbruck, Austria 2 alpS-Gmbh, 6020 Innsbruck, Austria In the eastern Alps the Helvetic units exposed at the surface form a narrow belt restricted to the westernmost part of Austria and the northerly adjacent southernmost part of Bavaria. The Helvetic zone represents a Tertiary fold-and-thrust belt made up of Jurassic to Cretaceous shelf sediments deposited on the European margin of the Eurasian plate. In the course of an industry-funded project, the potential of these units for deep hydro-geothermal energy is investigated. Potential targets for hydrothermal exploration are more or less thick carbonate sequences that can be traced throughout the Helvetic zone, namely the Late Jurassic Quinten Limestone and the Early Cretaceous Schrattenkalk-Fm. In depths of at least 3000m below sea level, that have to be drilled to gain water with at least 90°C, uncemented fractures at any scale are the only cavities within these carbonates to be expected. Therefore, brittle structures are studied at differing scales of observation; aerial photos and surface outcrops are analyzed as well as thin sections. All the data obtained so far were collected in areas deformed homogenously: measuring stations were located outside large scale shear zones and either in fold-limbs or hinge zones. A constantly geometrical relationship between the orientation of the various fractures, the sedimentary layering and the trace of the axial planes can be inferred, as already stated by Hancock (1985). Besides extension fractures, veins and stylolithes, conjugated hybrid and shear fractures are quite common, indicating layer-parallel shortening normal to the axial planes as well as axial elongation. Hence, all of the structures observed can be genetically linked with thrusting and folding during regional N-S compressional

  17. Crevasses, Fractures and Folds within Firn and Marine Ice of the McMurdo Shear Zone, Antarctica interpreted from GPR Profiles acquired with an Unmanned Rover

    Science.gov (United States)

    Arcone, S. A.; Lever, J.; Ray, L.

    2015-12-01

    The firn of the McMurdo shear zone within the Ross Ice Shelf, Antarctica is intensively crevassed, and may also contain crevasses within its meteoric and marine ice. However, the surface crevassing prevents ordinary vehicle access to investigate its structure geophysically. We used a lightweight robotic vehicle to tow 200 and 400 MHz ground-penetrating radar antennas simultaneously along 100 evenly spaced transects over a 28 km2 grid spanning the shear zone width. Transects were mainly orthogonal to ice flow. Total firn and meteoric ice thickness was about 160 m. Firn crevasses profiled at 400 MHz were up to 16 m wide, under snow bridges up to 10 m thick, and with strikes near 50-55° to general flow direction. From top down, 200-MHz profiles reveal firn diffractions originating to about 40 m depth, no discernible structure within the meteoric ice, a discontinuous transitional horizon, and at least 20 m of disturbed and stratified marine ice. Freeboard ranging from 28-31 m shows more marine ice exists. We interpret the transitional horizon to be a thin saline layer, and marine ice hyperbolic diffractions and reflections to be responses to localized fractures and to crevasses of various widths, filled with unstratified marine ice, and at strikes mainly between 41-63°. We interpret off-nadir, marine ice horizons to be responses to linear and folded faults, the structure and orientation of which are similar to some in firn. The coinciding and synchronously folded areas of fractured firn and marine ice suggest the visibly unstructured meteoric ice is also fractured, but either never crevassed, or crevassed and sutured without sea water penetration, and that any bottom crevasses that occurred near grounding lines have been thermally eroded. Consequently any fractures in the meteoric ice beneath our grid are likely to have formed far from any grounding area, but it is unclear why there is no evidence of sea water penetration given the fractured and crevassed marine ice.

  18. Ground-penetrating radar and electrical resistivity tomography for mapping bedrock topography and fracture zones: a case study in Viru-Nigula, NE Estonia

    Directory of Open Access Journals (Sweden)

    Ivo Sibul

    2017-06-01

    Full Text Available The Geological Base Map (GBM, presenting an elongated buried valley running beneath the Varudi bog, triggered the geophysical studies near Viru-Nigula borough in northeastern Estonia. After the Geological Survey of Estonia had compiled the GBM map set, the course and extent of the valley still remained indistinct. Principally the morphology of the Varudi valley had been determined just by one borehole characterizing the 30 m thick Quaternary succession within the valley. The thickness of Quaternary sediments is, however, just a few metres in adjacent boreholes. We used ground-penetrating radar and electrical resistivity tomography (ERT for acquiring extra knowledge about the extent and morphology of the Varudi structure. Ground-penetrating radar enabled us to specify the thickness and composition of Quaternary deposits, and to recognize dislocations of the bedrock blocks. As the radar images provided information on the topmost ~4 m only, ERT (Wenner and Wenner–Schlumberger arrays was applied to define deeper, down to 40 m, electrical resistivity anomalies. The ERT studies revealed two fracture zones where regular Ordovician carbonate beds have been crushed and replaced by Quaternary sediments. The Varudi valley coincides with the southern zone. Both fracture zones probably acted as groundwater flow channels and sediment pathways in the Late Pleistocene, and hence supported the creation of the Varudi bog.

  19. The Effect of Stagnant Water Zones on Retarding Radionuclide Transport in Fractured Rocks: An Extension to the Channel Network Model

    Science.gov (United States)

    Shahkarami, P. Mr; Neretnieks, I. E.

    2016-12-01

    An essential task of performance assessment of radioactive waste repositories is to predict radionuclide release into the environment. For such a quantitative assessment, the Channel Network Model and the corresponding computer program, CHAN3D, have been used to simulate radionuclide transport in crystalline bedrocks. Recent studies suggest, however, that the model may tend to underestimate the rock retarding capability, because it ignores the presence of stagnant water zones, STWZs, situated in the fracture plane. Once considered, the STWZ can provide additional surface area over which radionuclides diffuse into the rock matrix and thereby contribute to their retardation. The main objective of this contribution is to extend the Channel Network Model and its computer implementation to account for diffusion into STWZs and their adjacent rock matrices. A series of deterministic and probabilistic calculations are performed in this study. The deterministic calculations aimed to investigate the overall impact of STWZs in retarding radionuclide transport and their far-field releases at Forsmark, Sweden. While, the probabilistic calculations aimed to (I) simulate the tracer test experiment performed at Äspö HRL, STT-1 and (II) investigate the short- and long-term effect of diffusion into STWZs. The deterministic calculation results suggest that over the time-scale of the repository safety assessments, the presence of STWZs enhances the retardation of most long-lived radionuclides except for 36Cl and 129I. The probabilistic calculation results suggest that over the short time-scale of the tracer experiment, the effect of diffusion into STWZs is not as pronounced as that of matrix diffusion directly from the flow channel, and the latter remains the main retarding mechanism. Predictions for longer time-scale, tens of years and more, show that the effect of STWZs becomes strong and tends to increase with transport time. It is shown that over the long times of interest for

  20. Surveyor television camera, selected materials and electronic components, Appendix C

    Science.gov (United States)

    Carroll, W. F.

    1972-01-01

    The locations of various parts of the Surveyor camera are presented. Tables were prepared with emphasis on: (1) exterior parts and surfaces that are directly exposed to space, (2) parts that shield others from space radiation, (3) representative or unique materials, and (4) electronic devices that may contain unique or well-characterized materials.

  1. Caspar Wessel (1745-1818). Surveyor and Mathematician

    DEFF Research Database (Denmark)

    Branner, Bodil; Johansen, Nils Voje

    1999-01-01

    This is a biography. It focus on Caspar Wessel's work as surveyor under the auspices of the Royal Danish Academy of Sciences and Letters, in particular on some of his theoretical investigations of geodesy that lead him to use complex numbers to represent directions in a plane at least as early...

  2. Core skills requirement and competencies expected of quantity surveyors: perspectives from quantity surveyors, allied professionals and clients in Nigeria

    Directory of Open Access Journals (Sweden)

    Joshua Oluwasuji Dada

    2015-10-01

    Full Text Available Abstract Deployment of appropriate skills and competencies is crucial and germane to the development and continuous relevance of any profession. In the built environment, the science for selecting the required skills and competencies expected of quantity surveyors and understanding the inherent dependencies between them remains a research issue. The purpose of this study was to determine the skill requirements and competencies expected of quantity surveyors. A structured questionnaire was administered among quantity surveyors, architects, engineers, builders and clients in Nigeria. The respondents were asked to give rating, on a 5 point Likert scale, on usual skills and competencies required of quantity surveyors. A secondary objective of the study was to examine the important skills and competencies and categorized them into core skill, basic skill, core competence, optional competence and special competence. The results of the study indicate the important skills as computer literacy, building engineering, information technology, economics, measurement/quantification and knowledge of civil/heavy engineering works. The results also indicate the important competencies as cost planning and control, estimating, construction procurement system, contract documentation, contract administration and project management. It is emphasized that the findings of the research have considerable implications on the training and practice of quantity surveying in Nigeria.

  3. Core skills requirement and competencies expected of quantity surveyors: perspectives from quantity surveyors, allied professionals and clients in Nigeria

    Directory of Open Access Journals (Sweden)

    Joshua Oluwasuji Dada

    2012-12-01

    Full Text Available AbstractDeployment of appropriate skills and competencies is crucial and germane to the development and continuous relevance of any profession. In the built environment, the science for selecting the required skills and competencies expected of quantity surveyors and understanding the inherent dependencies between them remains a research issue. The purpose of this study was to determine the skill requirements and competencies expected of quantity surveyors. A structured questionnaire was administered among quantity surveyors, architects, engineers, builders and clients in Nigeria. The respondents were asked to give rating, on a 5 point Likert scale, on usual skills and competencies required of quantity surveyors. A secondary objective of the study was to examine the important skills and competencies and categorized them into core skill, basic skill, core competence, optional competence and special competence. The results of the study indicate the important skills as computer literacy, building engineering, information technology, economics, measurement/quantification and knowledge of civil/heavy engineering works. The results also indicate the important competencies as cost planning and control, estimating, construction procurement system, contract documentation, contract administration and project management. It is emphasized that the findings of the research have considerable implications on the training and practice of quantity surveying in Nigeria.

  4. Predictive modelling of fault related fracturing in carbonate damage-zones: analytical and numerical models of field data (Central Apennines, Italy)

    Science.gov (United States)

    Mannino, Irene; Cianfarra, Paola; Salvini, Francesco

    2010-05-01

    Permeability in carbonates is strongly influenced by the presence of brittle deformation patterns, i.e pressure-solution surfaces, extensional fractures, and faults. Carbonate rocks achieve fracturing both during diagenesis and tectonic processes. Attitude, spatial distribution and connectivity of brittle deformation features rule the secondary permeability of carbonatic rocks and therefore the accumulation and the pathway of deep fluids (ground-water, hydrocarbon). This is particularly true in fault zones, where the damage zone and the fault core show different hydraulic properties from the pristine rock as well as between them. To improve the knowledge of fault architecture and faults hydraulic properties we study the brittle deformation patterns related to fault kinematics in carbonate successions. In particular we focussed on the damage-zone fracturing evolution. Fieldwork was performed in Meso-Cenozoic carbonate units of the Latium-Abruzzi Platform, Central Apennines, Italy. These units represent field analogues of rock reservoir in the Southern Apennines. We combine the study of rock physical characteristics of 22 faults and quantitative analyses of brittle deformation for the same faults, including bedding attitudes, fracturing type, attitudes, and spatial intensity distribution by using the dimension/spacing ratio, namely H/S ratio where H is the dimension of the fracture and S is the spacing between two analogous fractures of the same set. Statistical analyses of structural data (stereonets, contouring and H/S transect) were performed to infer a focussed, general algorithm that describes the expected intensity of fracturing process. The analytical model was fit to field measurements by a Montecarlo-convergent approach. This method proved a useful tool to quantify complex relations with a high number of variables. It creates a large sequence of possible solution parameters and results are compared with field data. For each item an error mean value is

  5. Analysis of the Slab Temperature, Thermal Stresses and Fractures Computed with the Implementation of Local and Average Boundary Conditions in the Secondary Cooling Zones

    Directory of Open Access Journals (Sweden)

    Hadała B.

    2016-12-01

    Full Text Available The numerical simulations of the temperature fields have been accomplished for slab casting made of a low carbon steel. The casting process of slab of 1500 mm in width and 225 mm in height has been modeled. Two types of boundary condition models of heat transfer have been employed in numerical simulations. The heat transfer coefficient in the first boundary condition model was calculated from the formula which takes into account the slab surface temperature and water flow rate in each secondary cooling zone. The second boundary condition model defines the heat transfer coefficient around each water spray nozzle. The temperature fields resulting from the average in zones water flow rate and from the nozzles arrangement have been compared. The thermal stresses and deformations resulted from such temperature field have given higher values of fracture criterion at slab corners.

  6. Resolution and sensitivity of boat-towed RMT data to delineate fracture zones - Example of the Stockholm bypass multi-lane tunnel

    Science.gov (United States)

    Mehta, Suman; Bastani, Mehrdad; Malehmir, Alireza; Pedersen, Laust B.

    2017-04-01

    The resolution and sensitivity of water-borne boat-towed multi-frequency radio-magnetotelluric (RMT) data for delineating zones of weaknesses in bedrock are examined in this study. 2D modeling of RMT data along 40 profiles in joint transverse electric (TE) and transverse magnetic (TM) as well as determinant mode was used for this purpose. The RMT data were acquired over two water passages from the Lake Mälaren near the city of Stockholm where one of the largest underground infrastructure projects, a multi-lane tunnel, in Europe is currently being developed. Comparison with available borehole coring, refraction seismic and bathymetric data was used to scrutinize the RMT resistivity models. A low-resistivity zone observed in the middle of all the profiles is suggested to be from fracture/fault zones striking in the same direction as the water passages. Drilling observations confirm the presence of brittle structures in the bedrock, which manifest themselves as zones of low-resistivity and low-velocity in the RMT and refraction seismic data, respectively. Nevertheless, RMT is an inductive electromagnetic method hence the presence of conductive lake sediments may shield detecting the underlying fractured bedrock. The loss of resolution at depth implies that the structures within the bedrock under the lake sediments cannot reliably be delineated. To support this, a synthetic data analysis was carried out providing useful information on how to improve and plan the lake measurements for future studies. Synthetic modeling results for example suggested that frequencies as low as 3 kHz would be required to reliably resolve the bedrock and fracture zone within it in the study area. The modeling further illustrated the advantage of a fresh water layer that acts as a near-surface homogeneous medium eliminating the static shift effects. While boat-towed RMT data provided substantial information about the subsurface geology, the acquisition system should be upgraded to enable

  7. Effect of Single Fractured Zone on Water Inflow of Underground Unlined Cavern%单条裂隙破碎带对地下水封洞库涌水量的影响

    Institute of Scientific and Technical Information of China (English)

    路文龙; 周志芳; 黄勇

    2014-01-01

    基于某地下水封储油洞库的地质条件,利用GeoStudio软件对其进行二维渗流分析,将裂隙岩体等效为连续介质,同时考虑渗透性较大的单条裂隙破碎带,探讨破碎带对洞室涌水量的影响。研究表明洞室上方裂隙破碎带的存在将增加洞室的涌水量,并随着破碎带宽度和裂隙倾角的增加而增加。对裂隙破碎带进行灌浆处理后,其渗透性降低,洞室的涌水量也明显减少。%Based on the basic geological conditions of an underground unlined cavern for oil storage,two-dimensional seepage analysis software (GeoStudio)was employed to analyze the effect of fractured zone on water inflow of underground unlined cavern. The fractured rock mass was trea-ted as equivalent continuum medium,and single fracture zone with large hydraulic conductivity was embedded into the medium. The results show that the fracture zone at the top of the cavern increases the water inflow owing to the increase of the width and dip angle of the fracture zone. After the fracture zone grouting,its hydraulic conductivity decreased and groundwater inflow of the fracture zone reduces considerably.

  8. Grain size reduction due to fracturing and subsequent grain-size-sensitive creep in a lower crustal shear zone in the presence of a CO2-bearing fluid

    Science.gov (United States)

    Okudaira, Takamoto; Shigematsu, Norio; Harigane, Yumiko; Yoshida, Kenta

    2017-02-01

    To understand rheological weakening in the lower continental crust, we studied mylonites in the Paleoproterozoic Eidsfjord anorthosite, northern Norway. The zones of anorthositic mylonites range from a few millimeters to several meters thick, and include ultramylonites and protomylonites. They contain syn-kinematic metamorphic minerals, including Cl-bearing amphibole and scapolite. Thermodynamic analysis reveals that syn-deformational hydration reactions occurred at ∼600 °C and ∼700 MPa under CO2-bearing conditions. The protomylonites contain many fragmented plagioclase porphyroclasts. The fractures in porphyroclasts are filled with fine-grained plagioclase, suggesting that fracturing is a common mechanism of grain size reduction. The anorthite contents of fine-grained polygonal matrix plagioclase are different from those of porphyroclastic plagioclase, suggesting that the matrix grains nucleated and grew during syn-kinematic metamorphism. Plagioclase aggregates in the matrices of mylonites do not exhibit a distinct crystallographic preferred orientation, which implies that the dominant deformation mechanism was grain-size-sensitive creep. Consequently, in the lower crustal anorthositic mylonites, grain size reduction occurred via fracturing, rather than through dynamic recrystallization, leading to grain-size-sensitive creep. The syn-kinematic recrystallization of minor phases at plagioclase grain boundaries may suppress the growth of plagioclase and contribute to the development of grain-size-sensitive creep.

  9. Distribution and migration of aftershocks of the 2010 Mw 7.4 Ogasawara Islands intraplate normal-faulting earthquake related to a fracture zone in the Pacific plate

    Science.gov (United States)

    Obana, Koichiro; Takahashi, Tsutomu; No, Tetsuo; Kaiho, Yuka; Kodaira, Shuichi; Yamashita, Mikiya; Sato, Takeshi; Nakamura, Takeshi

    2014-04-01

    describe the aftershocks of a Mw 7.4 intraplate normal-faulting earthquake that occurred 150 km east Ogasawara (Bonin) Islands, Japan, on 21 December 2010. It occurred beneath the outer trench slope of the Izu-Ogasawara trench, where the Pacific plate subducts beneath the Philippine Sea plate. Aftershock observations using ocean bottom seismographs (OBSs) began soon after the earthquake and multichannel seismic reflection surveys were conducted across the aftershock area. Aftershocks were distributed in a NW-SE belt 140 km long, oblique to the N-S trench axis. They formed three subparallel lineations along a fracture zone in the Pacific plate. The OBS observations combined with data from stations on Chichi-jima and Haha-jima Islands revealed a migration of the aftershock activity. The first hour, which likely outlines the main shock rupture, was limited to an 80 km long area in the central part of the subsequent aftershock area. The first hour activity occurred mainly around, and appears to have been influenced by, nearby large seamounts and oceanic plateau, such as the Ogasawara Plateau and the Uyeda Ridge. Over the following days, the aftershocks expanded beyond or into these seamounts and plateau. The aftershock distribution and migration suggest that crustal heterogeneities related to a fracture zone and large seamounts and oceanic plateau in the incoming Pacific plate affected the rupture of the main shock. Such preexisting structures may influence intraplate normal-faulting earthquakes in other regions of plate flexure prior to subduction.

  10. Evaluation of crack arrest fracture toughness of parent plate, weld metal and heat affected zone of BIS 812 EMA ship plate steel

    Science.gov (United States)

    Burch, I. A.

    1993-10-01

    The steel chosen for the pressure hull of the Collins class submarine has undergone evaluation to compare the crack arrest fracture toughness, K(Ia), of the parent plate with that of weld metal and heat affected zone. The tests were conducted over a range of subzero temperatures on specimens slightly outside the ASTM standard test method specimen configuration. Shallow face grooved specimens were used to vary the propagating crack velocity from that of non face grooved specimens and determine if K(Ia), is sensitive to changes in crack velocity. The weld metal, heat affected zone (HAZ), and parent plate were assessed to determine if the welding process had a deleterious effect on the crack arrest properties of this particular steel. Tests on each of these regions revealed that, for the combination of parent plate, welding procedure and consumables, no adverse effect on crack arrest properties was encountered. Crack arrest fracture toughness of the weld metal and HAZ was superior to that of the parent plate at comparable temperatures.

  11. Biomechanical Comparison of Two Kinds of Internal Fixation in a Type C Zone Ⅱ Pelvic Fracture Model

    Institute of Scientific and Technical Information of China (English)

    Tao Wu; Wei Chen; Qi Zhang; Zhan-Le Zheng; Hong-Zhi Lyu; Yun-Wei Cui; Xiao-Dong Cheng

    2015-01-01

    Background:Unstable pelvic fractures are complex and serious injuries.Selection of a fixation method for these fractures remains a challenging problem for orthopedic surgeons.This study aimed to compare the stability of Tile C pelvic fractures fixed with two iliosacral (IS) screws and minimally invasive adjustable plate (MIAP) combined with one IS screw.Methods:This study was a biomechanical experiment.Six embalmed specimens of the adult pelvis were used.The soft tissue was removed from the specimens,and the spines from the fourth lumbar vertebra to the proximal one-third of both femurs were retained.The pubic symphysis,bilateral sacroiliac joints and ligaments,bilateral hip joints,bilateral sacrotuberous ligaments,and bilateral sacrospinous ligaments were intact.Tile C pelvic fractures were made on the specimens.The symphysis pubis was fixed with a plate,and the fracture on the posterior pelvic ring was fixed with two kinds of internal fixation in turn.The specimens were placed in a biomechanical machine at a standing neutral posture.A cyclic vertical load of up to 500 N was applied,and displacement was recorded.Shifts in the fracture gap were measured by a grating displacement sensor.Statistical analysis used:Paired-samples t-test.Results:Under the vertical load of 100,200,300,400,and 500 N,the average displacement of the specimens fixed with MIAP combined with one IS screw was 0.46,0.735,1.377,1.823,and 2.215 mm,respectively,which was significantly lower than that of specimens fixed with two IS screws under corresponding load (P < 0.05).Under the vertical load of 500 N,the shift in the fracture gap of specimens fixed with MIAP combined with one IS screw was 0.261 ± 0.095 mm,and that of specimens fixed with two IS screws was 0.809 ± 0.170 mm.The difference was significant (P < 0.05).Conclusion:The stability of Tile C pelvic fractures fixed with MIAP combined with one IS screw was better than that fixed with two IS screws.

  12. Multiscale Modeling for Fracture Zone with Detailed Division%裂隙矿段多尺度精细分区模型构建

    Institute of Scientific and Technical Information of China (English)

    胡建华; 胡昱; 周科平; 何川

    2015-01-01

    With the True Reflection Tomography( TRT) 3D image processed by slicing, the generated data was exported and coupled into 3DMine software, resulting in a local reflection coefficient of fracture zone. The principle for data exporting and method for model construction were all presented. Based on the digital model of the deposit, a multiscale modeling for fracture zone with detailed division was obtained. Then, a further analysis was conducted for such multiscale modeling . Result showed that the process of slicing TRT image can give a classification of degree of rock mass damage in fracture zone. Based on the digital processing, a model with detailed rock mass damage can be constructed with the classification of reflection coefficient, which is also a multiscale model from the perspective of space, beneficial for processing and analyzing the difference in each mineralized zone. The application into engineering project also indicated such multiscale modeling with detailed division can meet the requirement for regional mining and security in underground mine.%利用TRT6000超前探测数据与3DMine软件耦合,以切片导出数据的方法,获取裂隙矿段的局地反射系数并确立了数据导出原则和模型构建方法,在矿床数字模型基础上,建立裂隙矿段多尺度精细分区模型。对TRT6000数据导出及在3DMine中建立多尺度精细分区模型的方法进行了研究,并对构建的多尺度精细分区模型进行了进一步分析,结果表明:切片数据处理方法可以建立裂隙矿段不同破损程度岩体的分级并进行精细数字化处理;利用反射系数的分级,实现了岩体破损精细建模,有利于不同矿段的差异化处置与分析,是一种跨空间的多尺度模型。工程应用表明精细化、多尺度模型满足了区域采矿与局地安全的需要。

  13. Neutron Star Science with the X-ray Surveyor

    Science.gov (United States)

    Ozel, Feryal

    2015-10-01

    Probing the interiors and magnetic fields of neutron stars and characterizing their populations in the Galaxy is an important science goal for the next generation X-ray telescopes. I will discuss how the capabilities of the X-ray Surveyor Mission are crucial for making significant advances in these fields and how we can address the open questions with a dataset that will become available with such a mission.

  14. The seismogenic Gole Larghe Fault Zone (Italian Southern Alps): quantitative 3D characterization of the fault/fracture network, mapping of evidences of fluid-rock interaction, and modelling of the hydraulic structure through the seismic cycle

    Science.gov (United States)

    Bistacchi, A.; Mittempergher, S.; Di Toro, G.; Smith, S. A. F.; Garofalo, P. S.

    2016-12-01

    The Gole Larghe Fault Zone (GLFZ) was exhumed from 8 km depth, where it was characterized by seismic activity (pseudotachylytes) and hydrous fluid flow (alteration halos and precipitation of hydrothermal minerals in veins and cataclasites). Thanks to glacier-polished outcrops exposing the 400 m-thick fault zone over a continuous area > 1.5 km2, the fault zone architecture has been quantitatively described with an unprecedented detail, providing a rich dataset to generate 3D Discrete Fracture Network (DFN) models and simulate the fault zone hydraulic properties. The fault and fracture network has been characterized combining > 2 km of scanlines and semi-automatic mapping of faults and fractures on several photogrammetric 3D Digital Outcrop Models (3D DOMs). This allowed obtaining robust probability density functions for parameters of fault and fracture sets: orientation, fracture intensity and density, spacing, persistency, length, thickness/aperture, termination. The spatial distribution of fractures (random, clustered, anticlustered…) has been characterized with geostatistics. Evidences of fluid/rock interaction (alteration halos, hydrothermal veins, etc.) have been mapped on the same outcrops, revealing sectors of the fault zone strongly impacted, vs. completely unaffected, by fluid/rock interaction, separated by convolute infiltration fronts. Field and microstructural evidence revealed that higher permeability was obtained in the syn- to early post-seismic period, when fractures were (re)opened by off-fault deformation. We have developed a parametric hydraulic model of the GLFZ and calibrated it, varying the fraction of faults/fractures that were open in the post-seismic, with the goal of obtaining realistic fluid flow and permeability values, and a flow pattern consistent with the observed alteration/mineralization pattern. The fraction of open fractures is very close to the percolation threshold of the DFN, and the permeability tensor is strongly anisotropic

  15. An Angus/Argo study of the neovolcanic zone along the East Pacific rise from the Clipperton fracture zone to 12°N

    Science.gov (United States)

    Uchupi, E.; Schwab, W. C.; Ballard, R. D.; Cheminee, J. L.; Francheteau, J.; Hekinian, R.; Blackman, D. K.; Sigurdsson, H.

    1988-09-01

    Still photographs and video images collected along the Neovolcanic Zone of the East Pacific Rise from 10°15'N to 11°53'N show that recent volcanic sheet flows, possibly less than 100 years old, are superimposed on an older sediment-laden pillow terrane. This recent activity is restricted to a narrow zone that crosses two topographic highs at 10°55'N and 11°26'N and diminishes along-axis away from these highs. The association of recent sheet flows with older flows and collapse structures on the overlapping spreading centers at 11°45'N supports the evolutionary model for the occurrence and evolution of overlapping spreading centers by MacDonald and others (1986, 1988).

  16. Grouting reinforcement technology for mine roadway repair in fault fracture zone%断层破碎带巷修注浆加固技术

    Institute of Scientific and Technical Information of China (English)

    兰永伟; 李凤义

    2012-01-01

    为了完善断层破碎带巷道维修方法,以注浆加固理论为基础,通过注浆材料配比实验,分析不同体积配比条件下,水泥水玻璃与凝固时间、抗压强度的关系,确定水泥水玻璃体积比为1∶0.4的注浆加固最佳配比方案。根据现场实际情况,提出了利用注浆加固技术、U型钢梁棚和喷射混凝土相结合的巷道维修方案,成功解决了现场问题。该研究对于类似矿井的断层破碎带巷道维修具有借鉴意义。%Aimed at improving mine roadway repair in fault fracture zone,this paper,building on grouting reinforcement theory and the experiments of grouting material ratio,presents an analysis of the relation between the geling time and cement-water-glass in different volume ratio conditions,and an analysis of the relation between the compressive strength and cement-water-glass in different volume ratio conditions.The paper features the best volume ratio of cement-water glass of 1:0.4 for grouting reinforcement,offers the mine roadway repair scheme tailored to the grouting reinforcement by combining U-shaped shed with shotcrete according to the practical conditions,and provides a better solution to on-site problems.The research has reference to repairing similar mine roadway with fault fracture zones.

  17. Application of Combined Supporting Scheme in the Fault Fracture Zone of Roadway%联合支护在巷道断层破碎带的应用

    Institute of Scientific and Technical Information of China (English)

    冯长飞; 齐杰

    2015-01-01

    The -450 m strike drift of Dajiazhuang shaft in Tianxin iron mine gets through the F10 fault fracture zone,the drilling hole depth is 40 m,the quantity of water gushing is 75 m3 /h,the sticking phenomenon is serious in the process of drilling.In order to deal with the water gushing in the process of tunneling,the working face pre-grouting technology is adopted to form the curtain around the roadway so as to seal the water gushing and reinforce the surrounding rock.The phenomenon of roof caving of work-ing face is appeared after pre-tunneling,the combined supporting scheme based on the advance tubing shield,steel arch shelf and rock bolt-net-shotcreting is adopted to get through the fault fracture zone suc-cessfully,and the good effect is obtained.%田兴铁矿大贾庄进风井-450 m 沿脉巷穿过 F10断层破碎带,探孔长探40 m,涌水量达到75 m3/h,且钻进过程卡钻严重。为防止掘进过程中出现大涌水,采用工作面预注浆技术,在巷道周边形成帷幕,封堵涌水并加固围岩。试掘后工作面顶板出现冒落,采用超前管棚、钢拱架、锚喷网3种方式联合支护,取得了较好的效果,顺利通过断层破碎带。

  18. Determination of the Height of the Water-Conducting Fractured Zone in Difficult Geological Structures: A Case Study in Zhao Gu No. 1 Coal Seam

    Directory of Open Access Journals (Sweden)

    Shuai Zhang

    2017-06-01

    Full Text Available The method for determining the upper limit for safe mining with regard to water and sand collapse prevention under thick alluvium and thin bedrock layers is a critical parameter for ensuring the sustainable development of a mine. The height of the water-conducting fractured zone (HWCFZ is an important index parameter in the prediction and prevention of water and sand collapse. This research was conducted based on the concrete geological condition of the Zhao Gu No. 1 coal mine. First, a field measurement method was used to observe the HWCFZ of a mined panel. The discrete element method was applied to establish a corresponding model, which was calibrated using the measurement data. Then, calculation models for different bedrock thicknesses were developed to analyze the evolution law of the water-conducting fractured zone at different bedrock thicknesses and mining heights. The safe mining upper limits for different bedrock thicknesses were obtained. The relationships between the developing HWCFZ and bedrock thickness/mining height were determined. Using the research results as the main indices, an industrial experiment was performed on the 11,191 panel. The partition limit mining height was implemented in the panel, and safe production was realized. On the basis of the research results, 40,199,336.3 t of coal resources were successfully released, increasing the resource recovery rate by 31.72% and extending the mine service life by 12.5 years. This study not only provided technical support for the sustainable development of the Zhao Gu No. 1 coal seam, but could also be used for safe and highly efficient mining in other coal mines under similar geological conditions.

  19. On gravity from SST, geoid from Seasat, and plate age and fracture zones in the Pacific. [Satellite-to-Satellite Tracking

    Science.gov (United States)

    Marsh, B. D.; Marsh, J. G.; Williamson, R. G.

    1984-01-01

    Data from an additional 50 satellite-to-satellite tracking (SST) passes were combined with earlier measurements of the high degree and order (n, m, 12) gravity in the central Pacific. A composite map was produced which shows good agreement with conventional GEM models. Data from the Seasat altimeter was reduced and found to agree well with both the SST and the GEM fields. The maps are dominated especially in the east, by a pattern of roughly east-west anomalies with a transverse wavelength of about 2000 km. Further comparison with regional bathymetric data shows a remarkably close correlation with plate age. Each anomaly band is framed by those major fracture zones having large offsets. The regular spacing of these fractures seems to account for the fabric in the gravity fields. Other anomalies are accounted for by hot spots. The source of part of these anomalies is in the lithosphere itself. The possible plume size and ascent velocity necessary to supply deep mantle material to the upper mantle without complete thermal equilibration is considered. Previously announced in STAR as N84-11559

  20. Martian clouds observed by Mars Global Surveyor Mars Orbiter Camera

    OpenAIRE

    Wang, Huiqun; Ingersoll, Andrew P.

    2002-01-01

    We have made daily global maps that cover both polar and equatorial regions of Mars for Ls 135°–360° and 0°–111° using the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) red and blue wide-angle swaths taken from May 1999 to January 2001. We study the seasonal distribution of condensate clouds and dust clouds during roughly 1 Martian year using these daily global maps. We present the development and decay of the tropical cloud belt and the polar hoods, the spatial and temporal distributi...

  1. Testing the principle of equivalence with Planck surveyor

    CERN Document Server

    Popa, L A; Mandolesi, N

    2002-01-01

    We consider the effect of the violation of the equivalence principle (VEP) by the massive neutrino component on the Cosmic Microwave Background angular power specrum. We show that in the presence of adiabatic and isocurvature primordial density perturbations the Planck surveyor can place limits on the maximal VEP by the massive neutrino component at the level of 10^ -5, valid in the general relativity, for the case in which the gravity is the single source of VEP. This work has been performed within the framework of the {\\sc Planck}/LFI activities.

  2. A chaotic-dynamical conceptual model to describe fluid flow and contaminant transport in a fractured vadose zone. 1997 progress report and presentations at the annual meeting, Ernest Orlando Lawrence Berkeley National Laboratory, December 3--4, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Faybishenko, B.; Doughty, C.; Geller, J. [and others

    1998-07-01

    Understanding subsurface flow and transport processes is critical for effective assessment, decision-making, and remediation activities for contaminated sites. However, for fluid flow and contaminant transport through fractured vadose zones, traditional hydrogeological approaches are often found to be inadequate. In this project, the authors examine flow and transport through a fractured vadose zone as a deterministic chaotic dynamical process, and develop a model of it in these terms. Initially, the authors examine separately the geometric model of fractured rock and the flow dynamics model needed to describe chaotic behavior. Ultimately they will put the geometry and flow dynamics together to develop a chaotic-dynamical model of flow and transport in a fractured vadose zone. They investigate water flow and contaminant transport on several scales, ranging from small-scale laboratory experiments in fracture replicas and fractured cores, to field experiments conducted in a single exposed fracture at a basalt outcrop, and finally to a ponded infiltration test using a pond of 7 by 8 m. In the field experiments, they measure the time-variation of water flux, moisture content, and hydraulic head at various locations, as well as the total inflow rate to the subsurface. Such variations reflect the changes in the geometry and physics of water flow that display chaotic behavior, which they try to reconstruct using the data obtained. In the analysis of experimental data, a chaotic model can be used to predict the long-term bounds on fluid flow and transport behavior, known as the attractor of the system, and to examine the limits of short-term predictability within these bounds. This approach is especially well suited to the need for short-term predictions to support remediation decisions and long-term bounding studies. View-graphs from ten presentations made at the annual meeting held December 3--4, 1997 are included in an appendix to this report.

  3. Early seafloor spreading in the South Atlantic: new evidence for M-series magnetochrons north of the Rio Grande Fracture Zone

    Science.gov (United States)

    Bird, Dale E.; Hall, Stuart A.

    2016-08-01

    Recent tectonic reconstructions of the South Atlantic have partitioned the ocean basin into several segments based upon one or more proposed intraplate South American deformation zones. In several of these reconstructions, opening of the southern segment(s) by seafloor spreading prior to Aptian-Albian time is accompanied by contemporaneous strike-slip motion along an intraplate boundary extending southeastward from the Andean Cochabamba—Santa Cruz bend to the Rio Grande Fracture Zone (RGFZ). We have examined new magnetic data over the Pelotas, Santos and Campos Basins, offshore Argentina and Brazil, acquired by ION-GXT in tandem with long-offset, long record seismic reflection data, and identified seafloor spreading anomalies M4, M3, M2 and M0 (˜131, ˜129, ˜128 and ˜125 Ma). Integrating these results with our earlier work, we have been able to correlate magnetochrons M4, M3, M2 and M0 north and south of the RGFZ on the South American margin, and north and south of the Walvis Ridge on the African side. Our results are therefore inconsistent with diachronous opening models that involve substantial continental strike-slip motion north of RGFZ during M4 to M0 time. Although the ocean basin may have opened from south to north, our results indicate that seafloor spreading began north of the RGFZ earlier than previously proposed.

  4. CERN's surveyors are pushing back the frontiers of precision

    CERN Multimedia

    2001-01-01

    Aiming at a target on the other side of the Alps, 730 kilometres from CERN, or controlling the positions of thousands of devices to a precision of one tenth of a millimetre, these are just some of the painstaking tasks undertaken by the surveyors in the Positioning Metrology and Surveying Group. These masters of measurement are pushing precision to its very limit.Go down into the LEP tunnel, walk about half a mile and then try to imagine how you could possibly take precise aim at something hundreds of kilometres away without any reference to the surface. Absurd, you might think? Not entirely, for that, in a nutshell, is the geodetic challenge of the Gran Sasso project. Indeed it is just one of the challenges faced by the surveyors in CERN's Positioning Metrology and Surveying Group, whose task it will be to aim a neutrino beam at a detector located in an underground cavern 732 kilometres away at INFN's Gran Sasso laboratory in Italy. The tools for solving such problems are provided by geodetics, the branch of...

  5. The Mars Surveyor '01 Rover and Robotic Arm

    Science.gov (United States)

    Bonitz, Robert G.; Nguyen, Tam T.; Kim, Won S.

    1999-01-01

    The Mars Surveyor 2001 Lander will carry with it both a Robotic Arm and Rover to support various science and technology experiments. The Marie Curie Rover, the twin sister to Sojourner Truth, is expected to explore the surface of Mars in early 2002. Scientific investigations to determine the elemental composition of surface rocks and soil using the Alpha Proton X-Ray Spectrometer (APXS) will be conducted along with several technology experiments including the Mars Experiment on Electrostatic Charging (MEEC) and the Wheel Abrasion Experiment (WAE). The Rover will follow uplinked operational sequences each day, but will be capable of autonomous reactions to the unpredictable features of the Martian environment. The Mars Surveyor 2001 Robotic Arm will perform rover deployment, and support various positioning, digging, and sample acquiring functions for MECA (Mars Environmental Compatibility Assessment) and Mossbauer Spectrometer experiments. The Robotic Arm will also collect its own sensor data for engineering data analysis. The Robotic Arm Camera (RAC) mounted on the forearm of the Robotic Arm will capture various images with a wide range of focal length adjustment during scientific experiments and rover deployment

  6. The X-Ray Surveyor Mission: A Concept Study

    Science.gov (United States)

    Gaskin, Jessica A.; Weisskopf, Martin C.; Vikhlinin, Alexey; Tananbaum, Harvey D.; Bandler, Simon R.; Bautz, Marshall W.; Burrows, David N.; Falcone, Abraham D.; Harrison, Fiona A.; Heilmann, Ralf K.; Heinz, Sebastian; Hopkins, Randall C.; Kilbourne, Caroline A.; Kouveliotou, Chryssa; Kraft, Ralph P.; Kravtsov, Andrey V.; McEntaffer, Randall L.; Natarajan, Priyamvada; O'Dell, Stephen L.; Petre, Robert; Prieskorn, Zachary R.; Ptak, Andrew F.; Ramsey, Brian D.; Reid, Paul B.; Schnell, Andrew R.; Schwartz, Daniel A.; Townsley, Leisa K.

    2015-01-01

    NASA's Chandra X-ray Observatory continues to provide an unparalleled means for exploring the high-energy universe. With its half-arcsecond angular resolution, Chandra studies have deepened our understanding of galaxy clusters, active galactic nuclei, galaxies, supernova remnants, neutron stars, black holes, and solar system objects. As we look beyond Chandra, it is clear that comparable or even better angular resolution with greatly increased photon throughput is essential to address ever more demanding science questions-such as the formation and growth of black hole seeds at very high redshifts; the emergence of the first galaxy groups; and details of feedback over a large range of scales from galaxies to galaxy clusters. Recently, we initiated a concept study for such a mission, dubbed X-ray Surveyor. The X-ray Surveyor strawman payload is comprised of a high-resolution mirror assembly and an instrument set, which may include an X-ray microcalorimeter, a high-definition imager, and a dispersive grating spectrometer and its readout. The mirror assembly will consist of highly nested, thin, grazing-incidence mirrors, for which a number of technical approaches are currently under development-including adjustable X-ray optics, differential deposition, and new polishing techniques applied to a variety of substrates. This study benefits from previous studies of large missions carried out over the past two decades and, in most areas, points to mission requirements no more stringent than those of Chandra.

  7. The Infrared Imaging Surveyor (Iris) Project: Astro-F

    Science.gov (United States)

    Shibai, H.

    IRIS (Infrared Imaging Surveyor) is the first Japanese satellite dedicated solely to infrared astronomy. The telescope has 70-cm aperture, and is cooled down to 6 K with super-fluid helium assisted by two-stage Stirling cycle coolers. On the focal plane, the two instruments, the InfraRed Camera (IRC) and the Far-Infrared Surveyor (FIS), are mounted. IRC is a near- and mid-infrared camera for deep imaging-surveys in the wavelength region from 2 to 25 microns. FIS is a far-infrared instrument for a whole sky survey in the wavelength region from 50 to 200 microns. The diffraction-limited spatial resolution is achieved except in the shortest waveband. The point source sensitivity and the survey coverage are significantly improved compared to previous missions. The primary scientific objective is to investigate birth and evolution of galaxies in the early universe by surveys of young normal galaxies and starburst galaxies. IRIS is thrown by a Japanese M-V rocket into a sun-synchronous orbit, in which the cooled telescope can avoid huge emissions from the Sun and the Earth. The expected holding time of the super-fluid helium is more than one year. After consumption of the helium, the near-infrared observation can be continued by the mechanical coolers

  8. ASTRO-F : Infrared Imaging Surveyor (IRIS) Mission

    Science.gov (United States)

    Onaka, T.

    The ASTRO-F (also known as Infrared Imaging Surveyor: IRIS) is the second infrared satellite mission of the Institute of Space and Astronautical Science, Japan to be launched early 2004 with the M-V rocket and is planned as a second generation infrared sky survey mission. It has a 67-cm aperture telescope and is cooled by 170-liter liquid helium and Stirling-cycle coolers. Two scientific instruments share the focal plane. The infrared camera (IRC) covers 2 to 26 μm range with large two-dimensional arrays in the imaging and low-resolution spectroscopic modes and will perform deep sky surveys of selected areas of the sky with a wide field of view (10' × 10') at unprecedented sensitivity. The far-infrared Surveyor (FIS), consisting of an imaging scanner and a Fourier transform spectrometer, covers 50 to 200 μm range and makes a whole sky survey in four far-infrared bands, which is higher by more than 10 in sensitivity (20 110 mJy), better by several in the spatial resolution (30'' 50''), and longer in the spectral coverage (200 μm) than IRAS. A brief description and the current status of the ASTRO-F mission are presented.

  9. The Digital Cadastral Databse and the Role of the Private Licensed Surveyors in Denmark

    DEFF Research Database (Denmark)

    Enemark, Stig

    2006-01-01

    This article presents the cadastral system and the role of the private licensed surveyors in Denmark as a basis for discussion of its relevance to Ireland......This article presents the cadastral system and the role of the private licensed surveyors in Denmark as a basis for discussion of its relevance to Ireland...

  10. Are Quantity Surveyors Competent to Value for Civil Engineering Works? Evaluating QSs' Competencies and Militating Factors

    Science.gov (United States)

    Olawumi, Timothy Oluwatosin; Ayegun, Olaleke Amos

    2016-01-01

    The role of the quantity surveyor is one that is often unclear amongst the general public. This study discussed the competencies of the quantity surveyor in measuring and managing civil engineering works and also carrying out the financial management for civil engineering construction projects; also outlined the various competencies and skills…

  11. The link between quality and accreditation of residency programs: the surveyors' perceptions.

    Science.gov (United States)

    Dos Santos, Renato Antunes; Snell, Linda; Tenorio Nunes, Maria do Patrocinio

    2017-01-01

    Accreditation of medical residency programs has become globally important. Currently it is moving from the goal of attaining minimal standards to a model of continuous improvement. In some countries, the accreditation system engages peers (physicians) to survey residency programs. The surveyors are sometimes volunteers, usually engaged in multiple clinical and education activities. Few studies have investigated the benefits of residency program evaluation and accreditation from the perspective of the surveyors. As peers they both conduct and receive accreditation surveys, which puts them in a privileged position in that it provides the surveyor with an opportunity to share experiences and knowledge and apply what is learned in their own context. The objective of this study is to obtain the perceptions of these surveyors about the impact of an accreditation system on residency programs. Surveyors participated in semi-structured interviews. A thematic analysis was performed on the interview data, and resulting topics were grouped into five themes: Burden (of documentation and of time needed); Efficiency and efficacy of the accreditation process; Training and experience of surveyors; Being a peer; Professional skills and recognition of surveyors. These categories were organized into two major themes: 'Structure and Process' and 'Human Resources'. The study participants proposed ways to improve efficiency including diminish the burden of documentation to the physicians involved in the process and to increase efforts on training programs and payment for surveyors and program directors. Based on the results we propose a conceptual framework to improve accreditation systems.

  12. Fracture Phenomena in Amorphous Selenium

    DEFF Research Database (Denmark)

    Lindegaard-Andersen, Asger; Dahle, Birgit

    1966-01-01

    the velocities of ultrasonic longitudinal and shear waves were measured to 1820 m/sec and 930 m/sec, respectively. Based on these results the two line systems in the transition zone can be interpreted as ``Wallner lines'' with sources within the zone. ©1966 The American Institute of Physics......Fracture surfaces of amorphous selenium broken in flexure at room temperature have been studied. The fracture velocity was found to vary in different regions of the fracture surface. Peculiar features were observed in a transition zone between fast and slower fracture. In this zone cleavage steps...

  13. Conceptual and numerical models of groundwater flow and solute transport in fracture zones: Application to the Aspo Island (Sweden); Modelos conceptuales y numericos de flujo y transporte de solutos en zonas de fractura: aplicacion a la isla de Aspo (Suecia)

    Energy Technology Data Exchange (ETDEWEB)

    Molinero, J.; Samper, J.

    2003-07-01

    Several countries around the world are considering the final disposal of high-level radioactive waste in deep repositories located in fractured granite formations. Evaluating the long term safety of such repositories requires sound conceptual and numerical models which must consider simultaneously groundwater flow, solute transport and chemical and radiological processes. These models are being developed from data and knowledge gained from in situ experiments carried out at deep underground laboratories such as that of Aspo, Sweden, constructed in fractured granite. The Redox Zone Experiment is one of such experiments performed at Aspo in order to evaluate the effects of the construction of the access tunnel on the hydrogeological and hydrochemical conditions of a fracture zone intersected by the tunnel. Previous authors interpreted hydrochemical and isotopic data of this experiment using a mass-balance approach based on a qualitative description of groundwater flow conditions. Such an interpretation, however, is subject to uncertainties related to an over-simplified conceptualization of groundwater flow. Here we present numerical models of groundwater flow and solute transport for this fracture zone. The first model is based on previously published conceptual model. It presents noticeable un consistencies and fails to match simultaneously observed draw downs and chloride breakthrough curves. To overcome its limitations, a revised flow and transport model is presented which relies directly on available hydrodynamic and transport parameters, is based on the identification of appropriate flow and transport boundary conditions and uses, when needed, solute data extrapolated from nearby fracture zones. A significant quantitative improvement is achieved with the revised model because its results match simultaneously drawdown and chloride data. Other improvements are qualitative and include: ensuring consistency of hydrodynamic and hydrochemical data and avoiding

  14. Brittle deformation in Southern Granulite Terrane (SGT): A study of pseudotachylyte bearing fractures along Gangavalli Shear Zone (GSZ), Tamil Nadu, India.

    Science.gov (United States)

    mohan Behera, Bhuban; Thirukumaran, Venugopal; Biswal, Tapas kumar

    2016-04-01

    High grade metamorphism and intense deformation have given a well recognition to the Southern Granulite Terrane (SGT) in India. TTG-Charnockite and basic granulites constitute the dominant lithoassociation of the area. Dunite-peridotite-anorthosite-shonkinite and syenites are the intrusives. TTG-charnockite-basic granulite have undergone F1 (isoclinal recumbent), F2 (NE-SW) and F3 (NW-SE) folds producing several interference pattern. E-W trending Neoarchean and Palaeoproterozoic Salem-Attur Shear Zone exhibits a low angle ductile thrust as well as some foot print of late stage brittle deformation near Gangavalli area of Tamil Nadu. The thrust causes exhumation of basic granulites to upper crust. Thrusting along the decollement has retrograded the granulite into amphibolite rock. Subsequently, deformation pattern of Gangavalli area has distinctly marked by numerous vertical to sub-vertical fractures mostly dominating along 0-15 and 270-300 degree within charnockite hills that creates a maximum stress (σ1) along NNW and minimum stress (σ3) along ENE. However, emplacement of pseudotachylyte vein along N-S dominating fracture indicates a post deformational seismic event. Extensive fractures produce anastomose vein with varying thickness from few millimeters to 10 centimeters on the outcrop. ICP-AES study results an isochemical composition of pseudotachylyte vein that derived from the host charnockitic rock where it occurs. But still some noticeable variation in FeO-MgO and Na2O-CaO are obtained from different parts within the single vein showing heterogeneity melt. Electron probe micro analysis of thin sections reveals the existence of melt immiscibility during its solidification. Under dry melting condition, albitic rich melts are considered to be the most favorable composition for microlites (e.g. sheaf and acicular micro crystal) re-crystallization. Especially, acicular microlites preserved tachylite texture that suggest its formation before the final coagulation

  15. Rock types and ductile structures on a rock domain basis, and fracture orientation and mineralogy on a deformation zone basis. Preliminary site description. Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, Michael [Geological Survey of Sweden, Uppsala (Sweden); Forssberg, Ola [Golder Associates AB, Uppsala (Sweden)

    2006-09-15

    This report presents the results of the analysis of base geological data in order to establish the dominant rock type, the subordinate rock types and the orientation of ductile mineral fabrics within each rock domain included in the regional geological model, version 1.2. An assessment of the degree of homogeneity of each domain is also provided. The analytical work has utilised the presentation of data in the form of histograms and stereographic projections. Fisher means and K values or best-fit great circles and corresponding pole values have been calculated for the ductile structural data. These values have been used in the geometric modelling of rock domains in the regional model, version 1.2. Furthermore, all analytical results have been used in the assignment of properties to rock domains in this model. A second analytical component reported here addresses the orientation and mineralogy of fractures in the deterministic deformation zones that are included in the regional geological model, version 1.2. The analytical work has once again utilised the presentation of data in the form of histograms and stereographic projections. Fisher means and K values are presented for the orientation of fracture sets in the deterministic deformation zones that have been identified with the help of new borehole data. The frequencies of occurrence of different minerals along the fractures in these deformation zones as well as the orientation of fractures in the zones, along which different minerals occur, are also presented. The results of the analyses have been used in the establishment of a conceptual structural model for the Forsmark site and in the assignment of properties to deterministic deformation zones in model version 1.2.

  16. A Map-Making for the Planck Surveyor

    CERN Document Server

    Natoli, P; Gheller, C; Vittorio, N

    2001-01-01

    We present a parallel implementation of a map-making algorithm for CMB anisotropy experiments which is both fast and efficient. We show for the first time a Maximum Likelihood, minimum variance map obtained by processing the entire data stream expected from the Planck Surveyor, under the assumption of a symmetric beam profile. Here we restrict ourselves to the case of the 30 GHz channel of the Planck Low Frequency Instrument. The extension to Planck higher frequency channels is straightforward. If the satellite pointing periodicity is good enough to average data that belong to the same sky circle, then the code runs very efficiently on workstations. The serial version of our code also runs on very competitive time-scales the map-making pipeline for current and forthcoming balloon borne experiments.

  17. Cosmology Large Angular Scale Surveyor (CLASS) Focal Plane Development

    CERN Document Server

    Chuss, D T; Amiri, M; Appel, J; Bennett, C L; Colazo, F; Denis, K L; Dünner, R; Essinger-Hileman, T; Eimer, J; Fluxa, P; Gothe, D; Halpern, M; Harrington, K; Hilton, G; Hinshaw, G; Hubmayr, J; Iuliano, J; Marriage, T A; Miller, N; Moseley, S H; Mumby, G; Petroff, M; Reintsema, C; Rostem, K; U-Yen, K; Watts, D; Wagner, E; Wollack, E J; Xu, Z; Zeng, L

    2015-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) will measure the polarization of the Cosmic Microwave Background to search for and characterize the polarized signature of inflation. CLASS will operate from the Atacama Desert and observe $\\sim$70% of the sky. A variable-delay polarization modulator (VPM) modulates the polarization at $\\sim$10 Hz to suppress the 1/f noise of the atmosphere and enable the measurement of the large angular scale polarization modes. The measurement of the inflationary signal across angular scales that span both the recombination and reionization features allows a test of the predicted shape of the polarized angular power spectra in addition to a measurement of the energy scale of inflation. CLASS is an array of telescopes covering frequencies of 38, 93, 148, and 217 GHz. These frequencies straddle the foreground minimum and thus allow the extraction of foregrounds from the primordial signal. Each focal plane contains feedhorn-coupled transition-edge sensors that simultaneously d...

  18. The Evaluation of Complex Borehole Geophysics and Corescanning: for Detailed Characterization of Oriented Fracture Sets, Zones, and Hydraulic Flow on Different Scales. A Case Study: Moragy Granite, Mecsek Mts., Hungary

    Science.gov (United States)

    Maros, G.; Zilahi-Sebess, L.; Dudko, A.; Koroknai, Z.

    2005-12-01

    Our presentation outlines the methodology to determine the relationship between fractures and flow systems, and it tries to homogenize the results deriving from methods of different resolutions in a geological model. The granite suffered multi-phase brittle deformation during the Alpine orogene, the fractures renewed several times and were filled with multi-generation infillings. The cores were scanned with the ImaGeo system, the fractures were oriented, characterized in detail from geological and geophysical point of views, and structurally evaluated. A structural model was sketched (Maros et al 2004). The results were refined by the information received from geophysical data, primarily from well-logging (Zilahi-Sebess et al 2003), but radar measurements, crosshole velocity tomography were also used (Toros et al 2004). Transmissivity in granite: 10-6-10-12, main fractures: 10-6-10-5 m2/s. Porous and fracture flow models were set up (Benedek et al 2003, Balla et al 2004). Correlations were found between the core-logging and the well-logging: acoustic openness, density, acoustic velocity, resistivity versus fracture frequency, fracture zones versus HPF influx places. The complex evaluation made the determination of the size and dip of fracture zones more precise. The flow characteristics of individual fractures and fracture zones, however, are influenced by their unique features; no parameter-group can be selected that definitely produces permeable or impermeable fractures. The interpretation of the observations carried out on different scales can be done in several ways. One method is to use methods of different resolutions densely enough to be representative. We examined the relation of information deriving from high resolution methods and the well-logging. On the basis of the depth-trends it is possible to extrapolate the information around the borehole. The relationship with the geophysical surveys is possible through the resistivity and acoustic measurements

  19. Bathyal demersal fishes of Charlie Gibbs Fracture Zone region (49-54°N) of the Mid-Atlantic Ridge, I: Results from trawl surveys

    Science.gov (United States)

    Cousins, Nicola J.; Shields, Mark A.; Crockard, Deborah; Priede, Imants G.

    2013-12-01

    Demersal fishes were sampled by single-warp otter trawl (OTSB) at three sites on the Mid-Atlantic Ridge (MAR), to the northeast (NE), northwest (NW) and southeast (SE) of the Charlie-Gibbs Fracture Zone at approximately 2500 m depth. The mean abundance was 4109 fish km-2 (SD 3714) and biomass 897.1 kg km-2 (SD 842.9) compared with 1996 fish km-2 (SD 1497) and 721.2 kg km-2 (SD 387) at the same depth on the Porcupine Seabight (PSB) segment of the NE Atlantic Ocean margin from previous studies. There was no significant difference in biomass or abundance between the three sites on the MAR, nor in comparison with the ocean margin. A total of fish 22 species were recorded at the three MAR sites with evidence of highest species richness at the SE site. No unique species were found on the ridge; but there were differences in species composition between the PSB and the MAR. Coryphaenoides brevibarbis and Antimora rostrata were important at both the NE and NW trawl sites on the MAR whereas Halosauropsis macrochir was most important in the SE. We conclude that the MAR is an important habitat for species otherwise confined to narrow strips of appropriate depth around the North Atlantic Ocean margins. The MAR supports similar population densities to ocean margin settings but with differences in relative importance of different species between regions.

  20. A ~400 ka supra-Milankovitch cycle in the Na, Mg, Pb, Ni, and Co records of a ferromanganese crust from the Vityaz fracture zone, central Indian ridge

    Directory of Open Access Journals (Sweden)

    R. Banerjee

    2010-07-01

    Full Text Available A ~400 ka (kilo years supra-Milankovitch cycle, recorded in the sodium, magnesium, lead, nickel and cobalt contents of a 32 mm thick ferromanganese crust from Vityaz fracture zone, central Indian ridge is reported here. To arrive at the geological ages, we used both 230Thexeccs and Co-chronometric datings. The correlation coefficient between the 230Thexeccs based dates and Co-chronometric dates for the top 0–8 mm is very high (r=0.9734, at 99.9% significance. The cobalt chronometric age for the bottom most oxide layer of this crust is computed as 3.5 Ma. Red-fit and multi-taper spectral analyses of time series data revealed the existence of the significant ~400 ka cycle, representing the changes in the hydrogeochemical conditions in the ocean due to the Earth's orbital eccentricity related summer insolation at the equator. This is the first report of such cycle from a hydrogenous ferromanganese crust from equatorial Indian ocean.

  1. Evolution of Crack-Tip Transformation Zones in Superelastic Nitinol Subjected to in Situ Fatigue. a Fracture Mechanics And Synchrotron X-Ray Microdiffraction Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, S.W.; Mehta, A.; Pelton, A.R.; Ritchie, R.O.; /UC, Berkeley /SLAC, SSRL

    2009-04-29

    The ultrahigh spatial resolution ({approx}1 {micro}m{sup 2}) of synchrotron X-ray microdiffraction is combined with fracture mechanics techniques to directly measure in situ three-dimensional strains, phases and crystallographic alignment ahead of a growing fatigue crack (100 cycles in situ) in superelastic Nitinol. The results provide some surprising insights into the growth of cracks in phase-transforming material at the microscale. Specifically, despite a macroscopic superelastic strain recovery of 6-8% associated with the phase transformation, individual austenite grains experience local strains of less than 1.5%. This observation indicates that it is the localized process of the accommodation of the transformation and subsequent loading of the martensite that provide the main source of the large recoverable strains. Furthermore, the plastic region ahead of the crack is composed of deformed martensite. This micromechanical transformation process is dependent upon the material texture, and directly influences the transformation zone size/shape as well as the crack path.

  2. Zoogeography of the San Andreas Fault system: Great Pacific Fracture Zones correspond with spatially concordant phylogeographic boundaries in western North America.

    Science.gov (United States)

    Gottscho, Andrew D

    2016-02-01

    The purpose of this article is to provide an ultimate tectonic explanation for several well-studied zoogeographic boundaries along the west coast of North America, specifically, along the boundary of the North American and Pacific plates (the San Andreas Fault system). By reviewing 177 references from the plate tectonics and zoogeography literature, I demonstrate that four Great Pacific Fracture Zones (GPFZs) in the Pacific plate correspond with distributional limits and spatially concordant phylogeographic breaks for a wide variety of marine and terrestrial animals, including invertebrates, fish, amphibians, reptiles, birds, and mammals. These boundaries are: (1) Cape Mendocino and the North Coast Divide, (2) Point Conception and the Transverse Ranges, (3) Punta Eugenia and the Vizcaíno Desert, and (4) Cabo Corrientes and the Sierra Transvolcanica. However, discussion of the GPFZs is mostly absent from the zoogeography and phylogeography literature likely due to a disconnect between biologists and geologists. I argue that the four zoogeographic boundaries reviewed here ultimately originated via the same geological process (triple junction evolution). Finally, I suggest how a comparative phylogeographic approach can be used to test the hypothesis presented here.

  3. Characterization and monitoring of the excavation damaged zone in fractured gneisses of the Roselend tunnel, French Alps

    Science.gov (United States)

    Wassermann, J.; Sabroux, J. C.; Pontreau, S.; Bondiguel, S.; Guillon, S.; Richon, P.; Pili, E.

    2011-04-01

    The Roselend dead-end tunnel was excavated in the last fifties by blasting in the Méraillet crystalline rock mass located on the shore of an artificial reservoir lake in the French Alps. Successive emptying and filling of the reservoir lake induce mechanical deformation of the rock mass. Thus, this tunnel is an exceptional place to study the evolution of the damaged zone (due to the excavation, and named EDZ) under a periodic mechanical or hydraulic loading. From the perspective of radioactive waste isolation in deep geological strata, the EDZ transport properties, and their evolution with time, are of major importance. The purpose of this study is, on the one hand, to quantify the transport properties of the EDZ of the Roselend tunnel through permeability measurements and drill core observations; on the other hand, to monitor the response of the EDZ to external solicitations via borehole pressure measurements. The air permeability has been deduced from pneumatic tests performed along several boreholes. The permeability profiles and the observation of drill cores lead to an estimation of the extent of the EDZ, of about 1 m around the tunnel. The response of the EDZ to barometric pumping has been observed through borehole pressure monitoring. Time-lag and attenuation of the barometric signal that propagates into the EDZ have been measured at a metric scale. The identification of potential time-lag and attenuation variations needs further investigations, the long time series of borehole pressure monitoring shows pressure increase probably due to percolating water during successive snow cover and thawing periods as observed in the Roselend area during winter.

  4. Bridging the Gap Between Surveyors and the Geo-Spatial Society

    Science.gov (United States)

    Müller, H.

    2016-06-01

    For many years FIG, the International Association of Surveyors, has been trying to bridge the gap between surveyors and the geospatial society as a whole, with the geospatial industries in particular. Traditionally the surveying profession contributed to the good of society by creating and maintaining highly precise and accurate geospatial data bases, based on an in-depth knowledge of spatial reference frameworks. Furthermore in many countries surveyors may be entitled to make decisions about land divisions and boundaries. By managing information spatially surveyors today develop into the role of geo-data managers, the longer the more. Job assignments in this context include data entry management, data and process quality management, design of formal and informal systems, information management, consultancy, land management, all that in close cooperation with many different stakeholders. Future tasks will include the integration of geospatial information into e-government and e-commerce systems. The list of professional tasks underpins the capabilities of surveyors to contribute to a high quality geospatial data and information management. In that way modern surveyors support the needs of a geo-spatial society. The paper discusses several approaches to define the role of the surveyor within the modern geospatial society.

  5. 岩巷过断层破碎带联合支护技术的应用%Application of Combined Support Technology of Crossing Fault Fracture Zone in Rock Roadway

    Institute of Scientific and Technical Information of China (English)

    彭荣; 彭斌武

    2014-01-01

    The characteristic of loose ,soft ,low strength ,easy expansion and plasticity rheology of fault fracture zone surrounding rock increased the difficulty of rock roadway driving and supporting .Combined supporting tech-nology of arching + support arch + floor ram + grouting behind segment was used while crossing geological fracture zone at -380 m level east roadway in Xifenglun Colliery ,according to one year of observation ,the big-gest level displacement of roadway wall was 20 mm ,the largest convergence of roof and floor was 4 mm ,which effectively controlled the roadway deformation of fracture zone .%断层破碎带围岩具有松散、软弱等特征,强度低,易膨胀和发生塑性流变,增加了岩巷掘进与支护的困难。西峰仑煤矿-380 m水平东大巷过地质破碎带时采用砌碹+拱形支架+底板捣制+壁后注浆联合支护技术,根据1年的观测,巷道帮部最大水平位移20mm,顶底板最大移近量4mm,有效地控制了破碎带巷道的变形。

  6. Effects of alloying elements on fracture toughness in the transition temperature region of base metals and simulated heat-affected zones of Mn-Mo-Ni low-alloy steels

    Science.gov (United States)

    Kim, Sangho; Im, Young-Roc; Lee, Sunghak; Lee, Hu-Chul; Kim, Sung-Joon; Hong, Jun Hwa

    2004-07-01

    This study is concerned with the effects of alloying elements on fracture toughness in the transition temperature region of base metals and heat-affected zones (HAZs) of Mn-Mo-Ni low-alloy steels. Three kinds of steels whose compositions were varied from the composition specification of SA 508 steel (grade 3) were fabricated by vacuum-induction melting and heat treatment, and their fracture toughness was examined using an ASTM E1921 standard test method. In the steels that have decreased C and increased Mo and Ni content, the number of fine M2C carbides was greatly increased and the number of coarse M3C carbides was decreased, thereby leading to the simultaneous improvement of tensile properties and fracture toughness. Brittle martensite-austenite (M-A) constituents were also formed in these steels during cooling, but did not deteriorate fracture toughness because they were decomposed to ferrite and fine carbides after tempering. Their simulated HAZs also had sufficient impact toughness after postweld heat treatment. These findings indicated that the reduction in C content to inhibit the formation of coarse cementite and to improve toughness and the increase in Mo and Ni to prevent the reduction in hardenability and to precipitate fine M2C carbides were useful ways to improve simultaneously the tensile and fracture properties of the HAZs as well as the base metals.

  7. CHISL: The Combined High-resolution and Imaging Spectrograph for the LUVOIR Surveyor

    CERN Document Server

    France, Kevin; Hoadley, Keri

    2016-01-01

    NASA is currently carrying out science and technical studies to identify its next astronomy flagship mission, slated to begin development in the 2020s. It has become clear that a Large Ultraviolet/Optical/IR (LUVOIR) Surveyor mission (primary diameter 12 m, 1000 Ang - 2 micron spectroscopic bandpass) can carry out the largest number of NASA's exoplanet and astrophysics science goals over the coming decades. There are technical challenges for several aspects of the LUVOIR Surveyor concept, including component level technology readiness maturation and science instrument concepts for a broadly capable ultraviolet spectrograph. We present the scientific motivation for, and a preliminary design of, a multiplexed ultraviolet spectrograph to support both the exoplanet and astrophysics goals of the LUVOIR Surveyor mission concept, the Combined High-resolution and Imaging Spectrograph for the LUVOIR Surveyor (CHISL). CHISL includes a high-resolution (R 120,000; 1000 - 1700 Ang) point-source spectroscopy channel and a ...

  8. Mode of opening of an oceanic pull-apart: The 20°N Basin along the Owen Fracture Zone (NW Indian Ocean)

    Science.gov (United States)

    Rodriguez, Mathieu; Chamot-Rooke, Nicolas; Fournier, Marc; Huchon, Philippe; Delescluse, Matthias

    2013-09-01

    basins are common features observed at releasing bends along major strike-slip faults. The formation and structural evolution of such basins have mostly been investigated in the continental domain and by sandbox laboratory experiments or numerical models. Here we present recently acquired multibeam bathymetry, 3.5 kHz echo sounder, and seismic profiles across the 20°N pull-apart Basin along the India-Arabia transform boundary, known as the Owen Fracture Zone (OFZ). Using nearby oceanic drilling (Deep Sea Drilling Project 222), we constrain the structural evolution of the basin since opening some 3 Myr ago. The 20°N Basin is large (90 km long and 35 km wide) despite limited transcurrent motion (~10 km). The first stage involved the formation of a step over along the OFZ and the subsequent isolation of a subsiding half graben. Extension and subsidence were further partitioned over three distinct subbasins separated by complex sets of transverse faults. The size of the basin was enhanced by gravity-driven collapse. The 20°N Basin has been a catchment for Indus turbidites since its opening, which provide a good record of syn-sedimentary deformation. The deformation related to the subsidence of the half graben mimics rollover structures commonly encountered in salt tectonics, suggesting that subsidence was accommodated by one or several décollement layers at depth. Despite a different rheological context, the subsurface structure of the nascent oceanic 20°N Basin is very similar to the more mature continental Dead Sea Basin along the Levant Fault, which also displays subbasins separated by transverse faults.

  9. New direct estimates of Iceland-Scotland Overflow Water transport through the Charlie-Gibbs Fracture Zone and its relationship to the North Atlantic Current

    Science.gov (United States)

    Bower, Amy; Furey, Heather; Xu, Xiaobiao

    2015-04-01

    Detailed observations of the pathways, transports and water properties of dense overflows associated with the Atlantic Meridional Overturning Circulation (AMOC) provide critical benchmarks for climate models and mixing parameterizations. A recent two-year time series from eight moorings offers the first long-term simultaneous observations of the hydrographic properties and transport of Iceland-Scotland Overflow Water (ISOW) flowing westward through the Charlie-Gibbs Fracture Zone (CGFZ), a major deep gap in the Mid-Atlantic Ridge (MAR) connecting the eastern and western basins of the North Atlantic. In addition, current meters up to 500-m depth and satellite altimetry allow us to investigate the overlying North Atlantic Current (NAC) as a source of ISOW transport variability. Using the isohaline 34.94 to define the ISOW layer, the two year mean and standard deviation of ISOW transport was -1.7 ± 1.5 Sv, compared to -2.4 ± 3.0 Sv reported by Saunders for a 13-month period in 1988-1989 using the same isohaline. Differences in the two estimates are partly explained by limitations of the Saunders array, but more importantly reflect the strong low-frequency variability in ISOW transport through CGFZ (which includes complete reversals). Both the observations and output from a multi-decadal simulation of the North Atlantic using the Hybrid Coordinate Ocean Model (HYCOM) forced with interannually varying wind and buoyancy fields indicate a strong positive correlation between ISOW transport and the strength of the NAC through the CGFZ. This result raises new questions regarding the interaction of the upper and lower limbs of the AMOC, downstream propagation of ISOW transport variability in the Deep Western Boundary Current and alternative pathways of ISOW across the MAR.

  10. The Far-Infrared Surveyor Mission Study: Paper I, the Genesis

    Science.gov (United States)

    Meixner, M.; Cooray, A.; Carter, R.; DiPirro, M.; Flores, A.; Leisawitz, D.; Armus, L.; Battersby, C.; Bergin, E.; Bradford, C. M.; hide

    2017-01-01

    This paper describes the beginning of the Far-Infrared Surveyor mission study for NASA's Astrophysics Decadal 2020. We describe the scope of the study, and the open process approach of the Science and Technology Definition Team. We are currently developing the science cases and provide some preliminary highlights here. We note key areas for technological innovation and improvements necessary to make a Far-Infrared Surveyor mission a reality.

  11. The Far-Infrared Surveyor Mission study: paper I, the genesis

    Science.gov (United States)

    Meixner, M.; Cooray, A.; Carter, R.; DiPirro, M.; Flores, A.; Leisawitz, D.; Armus, L.; Battersby, C.; Bergin, E.; Bradford, C. M.; Ennico, K.; Melnick, G. J.; Milam, S.; Narayanan, D.; Pontoppidan, K.; Pope, A.; Roellig, T.; Sandstrom, K.; Su, K. Y. L.; Vieira, J.; Wright, E.; Zmuidzinas, J.; Alato, S.; Carey, S.; Gerin, M.; Helmich, F.; Menten, K.; Scott, D.; Sakon, I.; Vavrek, R.

    2016-07-01

    This paper describes the beginning of the Far-Infrared Surveyor mission study for NASA's Astrophysics Decadal 2020. We describe the scope of the study, and the open process approach of the Science and Technology Definition Team. We are currently developing the science cases and provide some preliminary highlights here. We note key areas for technological innovation and improvements necessary to make a Far-Infrared Surveyor mission a reality.

  12. The Far-Infrared Surveyor Mission Study: Paper I, the Genesis

    CERN Document Server

    Meixner, M; Carter, R; DiPirro, M; Flores, A; Leisawitz, D; Armus, L; Battersby, C; Bergin, E; Bradford, C M; Ennico, K; Melnick, G J; Milam, S; Narayanan, D; Pontoppidan, K; Pope, A; Roellig, T; Sandstrom, K; Su, K Y L; Vieira, J; Wright, E; Zmuidzinas, J; Alato, S; Carey, S; Gerin, M; Helmich, F; Menten, K; Scott, D; Sakon, I; Vavrek, R

    2016-01-01

    This paper describes the beginning of the Far-Infrared Surveyor mission study for NASA's Astrophysics Decadal 2020. We describe the scope of the study, and the open process approach of the Science and Technology Definition Team. We are currently developing the science cases and provide some preliminary highlights here. We note key areas for technological innovation and improvements necessary to make a Far-Infrared Surveyor mission a reality.

  13. Screening for Mutations in Kidney-Related Genes Using SURVEYOR Nuclease for Cleavage at Heteroduplex Mismatches

    OpenAIRE

    Voskarides, Konstantinos; DELTAS, Constantinos

    2009-01-01

    SURVEYOR is a new mismatch-specific plant DNA endonuclease that is very efficient for mutation scanning in heteroduplex DNA. It is much faster, cheaper, more sensitive, and easier to perform than other “traditional” mutation detection methods such as single-strand conformation polymorphism analysis, denaturing high-performance liquid chromatography, heteroduplex analysis, and phage resolvases. This is the first comprehensive report on the use of SURVEYOR for screening genes implicated in a sp...

  14. Schmidt Crater: Using Data from the Mars Global Surveyor

    Science.gov (United States)

    Thomas, Fred

    2001-10-01

    In the Physics Department at Sinclair Community College in Dayton, the most popular general-education course is a three-quarter astronomy sequence. The course is designed to incorporate significant elements of conceptual physics, scientific methods, and quantitative reasoning, along with the content of astronomy. In cooperation with faculty from mathematics and sociology, the author developed new lab activities that engage students in making "practical" plans for the colonization of Mars. The activities are intended to be low-cost, to be suitable for either on-campus or distance-learning environments, and to be fun for both students and instructors. The Schmidt Crater region, an Ohio-sized area near the South Pole of Mars, was selected as a potential site for obtaining large quantities of water. Topographic data for the region was extracted from the 36 CD's of laser altimeter data obtained by the Mars Global Surveyor, and ArcView was used to produce detailed maps. Wide and narrow angle photos of the region from the Mars Orbiter Camera were integrated with the topographic maps. Both the maps and the photographs were therefore made accessible to students who can use free software packages, such as ArcExplorer and Scion Image With access to up-to-date data for this region, students complete a series of "authentic learning tasks" that include calculating water needs for a Martian city, identifying likely water sources, planning transportation methods, and selecting a "homestead" for their own personal use.

  15. The Far-Infrared Surveyor (FIS) for AKARI

    CERN Document Server

    Kawada, Mitsunobu; Barthel, Peter D; Clements, David; Cohen, Martin; Doi, Yasuo; Figueredo, Elysandra; Fujiwara, Mikio; Goto, Tomotsugu; Hasegawa, Sunao; Hibi, Yasunori; Hirao, Takanori; Hiromoto, Norihisa; Jeong, Woong-Seob; Kaneda, Hidehiro; Kawai, Toshihide; Kawamura, Akiko; Kester, Do; Kii, Tsuneo; Kobayashi, Hisato; Kwon, Suk Minn; Lee, Hyung Mok; Makiuti, Sin'itirou; Matsuo, Hiroshi; Matsuura, Shuji; Müller, Thomas G; Murakami, Noriko; Nagata, Hirohisa; Nakagawa, Takao; Narita, Masanao; Noda, Manabu; Oh, Sang Hoon; Okada, Yoko; Okuda, Haruyuki; Oliver, Sebastian; Ootsubo, Takafumi; Pak, Soojong; Park, Yong-Sun; Pearson, Chris P; Rowan-Robinson, Michael; Saito, Toshinobu; Salama, Alberto; Sato, Shinji; Savage, Richard S; Serjeant, Stephen; Shibai, Hiroshi; Shirahata, Mai; Sohn, Jungjoo; Suzuki, Toyoaki; Takagi, Toshinobu; Takahashi, Hidenori; Thomson, Matthew; Usui, Fumihiko; Verdugo, Eva; Watabe, Toyoki; White, Glenn J; Wang, Lingyu; Yamamura, Issei; Yamamuchi, Chisato; Yasuda, Akiko

    2007-01-01

    The Far-Infrared Surveyor (FIS) is one of two focal plane instruments on the AKARI satellite. FIS has four photometric bands at 65, 90, 140, and 160 um, and uses two kinds of array detectors. The FIS arrays and optics are designed to sweep the sky with high spatial resolution and redundancy. The actual scan width is more than eight arcmin, and the pixel pitch is matches the diffraction limit of the telescope. Derived point spread functions (PSFs) from observations of asteroids are similar to the optical model. Significant excesses, however, are clearly seen around tails of the PSFs, whose contributions are about 30% of the total power. All FIS functions are operating well in orbit, and its performance meets the laboratory characterizations, except for the two longer wavelength bands, which are not performing as well as characterized. Furthermore, the FIS has a spectroscopic capability using a Fourier transform spectrometer (FTS). Because the FTS takes advantage of the optics and detectors of the photometer, i...

  16. Cosmology Large Angular Scale Surveyor (CLASS) Focal Plane Development

    Science.gov (United States)

    Chuss, D. T.; Ali, A.; Amiri, M.; Appel, J.; Bennett, C. L.; Colazo, F.; Denis, K. L.; Dunner, R.; Essinger-Hileman, T.; Eimer, J.; Fluxa, P.; Gothe, D.; Halpern, M.; Harrington, K.; Hilton, G.; Hinshaw, G.; Hubmayr, J.; Iuliano, J.; Marriage, T. A.; Miller, N.; Moseley, S. H.; Mumby, G.; Petroff, M.; Reintsema, C.; Rostem, K.; U-yen, K.; Watts, D.; Wagner, E.; Wollack, E. J.; Xu, Z.; Zeng, L.

    2015-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) will measure the polarization of the Cosmic Microwave Background to search for and characterize the polarized signature of inflation. CLASS will operate from the Atacama Desert and observe approx.70% of the sky. A variable-delay polarization modulator provides modulation of the polarization at approx.10Hz to suppress the 1/f noise of the atmosphere and enable the measurement of the large angular scale polarization modes. The measurement of the inflationary signal across angular scales that spans both the recombination and reionization features allows a test of the predicted shape of the polarized angular power spectra in addition to a measurement of the energy scale of inflation. CLASS is an array of telescopes covering frequencies of 38, 93, 148, and 217 GHz. These frequencies straddle the foreground minimum and thus allow the extraction of foregrounds from the primordial signal. Each focal plane contains feedhorn-coupled transition-edge sensors that simultaneously detect two orthogonal linear polarizations. The use of single-crystal silicon as the dielectric for the on-chip transmission lines enables both high efficiency and uniformity in fabrication. Integrated band definition has been implemented that both controls the bandpass of the single-mode transmission on the chip and prevents stray light from coupling to the detectors.

  17. The Transient High Energy Sky and Early Universe Surveyor (THESEUS)

    Science.gov (United States)

    Amati, Lorenzo; O'Brien, Paul T.; Götz, Diego

    2016-07-01

    The Transient High Energy Sky and Early Universe Surveyor (THESEUS) is a mission concept under development by a large international collaboration aimed at exploiting gamma-ray bursts for investigating the early Universe. The main scientific objectives of THESEUS include: investigating the star formation rate and metallicity evolution of the ISM and IGM up to redshift 9-10, detecting the first generation (pop III) of stars, studying the sources and physics of re-ionization, detecting the faint end of galaxies luminosity function. These goals will be achieved through a unique combination of instruments allowing GRB detection and arcmin localization over a broad FOV (more than 1sr) and an energy band extending from several MeVs down to 0.3 keV with unprecedented sensitivity, as well as on-board prompt (few minutes) follow-up with a 0.6m class IR telescope with both imaging and spectroscopic capabilities. Such instrumentation will also allow THESEUS to unveil and study the population of soft and sub-energetic GRBs, and, more in general, to perform monitoring and survey of the X-ray sky with unprecedented sensitivity.

  18. Cosmology Large Angular Scale Surveyor (CLASS) Focal Plane Development

    Science.gov (United States)

    Chuss, D. T.; Ali, A.; Amiri, M.; Appel, J.; Bennett, C. L.; Colazo, F.; Denis, K. L.; Dünner, R.; Essinger-Hileman, T.; Eimer, J.; Fluxa, P.; Gothe, D.; Halpern, M.; Harrington, K.; Hilton, G.; Hinshaw, G.; Hubmayr, J.; Iuliano, J.; Marriage, T. A.; Miller, N.; Moseley, S. H.; Mumby, G.; Petroff, M.; Reintsema, C.; Rostem, K.; U-Yen, K.; Watts, D.; Wagner, E.; Wollack, E. J.; Xu, Z.; Zeng, L.

    2016-08-01

    The Cosmology Large Angular Scale Surveyor (CLASS) will measure the polarization of the Cosmic Microwave Background to search for and characterize the polarized signature of inflation. CLASS will operate from the Atacama Desert and observe ˜ 70 % of the sky. A variable-delay polarization modulator provides modulation of the polarization at ˜ 10 Hz to suppress the 1/ f noise of the atmosphere and enable the measurement of the large angular scale polarization modes. The measurement of the inflationary signal across angular scales that spans both the recombination and reionization features allows a test of the predicted shape of the polarized angular power spectra in addition to a measurement of the energy scale of inflation. CLASS is an array of telescopes covering frequencies of 38, 93, 148, and 217 GHz. These frequencies straddle the foreground minimum and thus allow the extraction of foregrounds from the primordial signal. Each focal plane contains feedhorn-coupled transition-edge sensors that simultaneously detect two orthogonal linear polarizations. The use of single-crystal silicon as the dielectric for the on-chip transmission lines enables both high efficiency and uniformity in fabrication. Integrated band definition has been implemented that both controls the bandpass of the single-mode transmission on the chip and prevents stray light from coupling to the detectors.

  19. Detector architecture of the cosmology large angular scale surveyor

    Science.gov (United States)

    Rostem, K.; Bennett, C. L.; Chuss, D. T.; Costen, N.; Crowe, E.; Denis, K. L.; Eimer, J. R.; Lourie, N.; Essinger-Hileman, T.; Marriage, T. A.; Moseley, S. H.; Stevenson, T. R.; Towner, D. W.; Voellmer, G.; Wollack, E. J.; Zeng, L.

    2012-09-01

    The cosmic microwave background (CMB) provides a powerful tool for testing modern cosmology. In particular, if inflation has occurred, the associated gravitational waves would have imprinted a specific polarized pattern on the CMB. Measurement of this faint polarized signature requires large arrays of polarization-sensitive, background- limited detectors, and an unprecedented control over systematic effects associated with instrument design. To this end, the ground-based Cosmology Large Angular Scale Surveyor (CLASS) employs large-format, feedhorn- coupled, background-limited Transition-Edge Sensor (TES) bolometer arrays operating at 40, 90, and 150 GHz bands. The detector architecture has several enabling technologies. An on-chip symmetric planar orthomode transducer (OMT) is employed that allows for highly symmetric beams and low cross-polarization over a wide bandwidth. Furthermore, the quarter-wave backshort of the OMT is integrated using an innovative indium bump bonding process at the chip level that ensures minimum loss, maximum repeatability and performance uniformity across an array. Care has been taken to reduce stray light and on-chip leakage. In this paper, we report on the architecture and performance of the first prototype detectors for the 40 GHz focal plane.

  20. Screening for mutations in kidney-related genes using SURVEYOR nuclease for cleavage at heteroduplex mismatches.

    Science.gov (United States)

    Voskarides, Konstantinos; Deltas, Constantinos

    2009-07-01

    SURVEYOR is a new mismatch-specific plant DNA endonuclease that is very efficient for mutation scanning in heteroduplex DNA. It is much faster, cheaper, more sensitive, and easier to perform than other "traditional" mutation detection methods such as single-strand conformation polymorphism analysis, denaturing high-performance liquid chromatography, heteroduplex analysis, and phage resolvases. This is the first comprehensive report on the use of SURVEYOR for screening genes implicated in a spectrum of inherited renal diseases. Of the 48.2 kb screened, 44 variations were identified, accounting for one variation per 1.1 kb. The re-sequencing of multiple samples did not reveal any variation that had not been identified by SURVEYOR, attesting to its high fidelity. Additionally, we tested this enzyme against 15 known variants, 14 of which it identified, thus showing a sensitivity of 93%. We showed that the genetic heterogeneity of renal diseases can be easily overcome using this enzyme with a high degree of confidence and no bias for any specific variations. We also showed for the first time that SURVEYOR does not demonstrate any preference regarding mismatch cleavage at specific positions. Disadvantages of using SURVEYOR include enhanced exonucleolytic activity for some polymerase chain reaction products and less than 100% sensitivity. We report that SURVEYOR can be used as a mutation detection method with a high degree of confidence, offering an excellent alternative for low-budget laboratories and for the rapid manipulation of multiple genes.

  1. Mars Global Surveyor measurements of solar storms and their effects

    Science.gov (United States)

    Brain, D. A.; Delory, G. T.; Lillis, R. J.; Ulusen, D.; Mitchell, D.; Luhmann, J. G.; Falkenberg, T. V.

    2010-12-01

    Space weather events in the form of solar photons and energetic charged particles provide brief but relatively intense periods of energy input to the Martian plasma environment and atmosphere, with implications for a number of science and exploration-related issues. The Mars Global Surveyor (MGS) spacecraft orbited Mars for more than 9 years, and was capable of indirectly detecting space weather events and their effects. Shocks associated with passing coronal mass ejections are evident in MGS magnetometer data, and in proxies for upstream solar wind pressure at 1.5 AU derived from magnetometer measurements. Fluxes of solar energetic particles with energies greater than ˜30 MeV are sometimes evident in the background count rates of the MGS electron instrument. Measurements of the background count rates at altitudes of ˜400 km over a seven year period provide an unprecedented long-baseline data set of the energetic particle environment at Mars over a significant fraction of a solar cycle. We will present results of analyses pertaining to three main uses of MGS observations of solar storms. First, by combining MGS measurements of solar storms with terrestrial and solar measurements, we have analyzed the propagation of individual solar storm events from the Sun throughout the inner heliosphere. Next, we have used MGS particle and field measurements to study the effect of solar storms on the Martian plasma environment - including increased fluxes of 10-20 keV electrons close to the planet and influences on auroral activity. Finally, we have studied the influence of solar storms on the Martian upper atmosphere - including suprathermal electrons produced in the atmosphere via impact ionization and a correlation of solar storm periods with ionospheric electron density profiles.

  2. Enhancement of Seismic Data Processing and Interpretation of Fracture Zones on the Upper Part of Granitic Basement in Cuu Long Basin, Vietnam

    Directory of Open Access Journals (Sweden)

    Tan Mai Thanh

    2016-12-01

    Full Text Available The fractured granite basement is the primary oil and gas reservoir in the Cuu Long Basin, Vietnam. Due to the complexity of this non-layered unconventional target, combined with complicated fault and fracture systems, the seismic data quality near and within the basement section is very low. For this reason, it is important to apply improved seismic data processing workflows, filtering and migration techniques, as wells as attribute processing methods to enhance the imaging quality.

  3. Perancangan Aplikasi Komputer Berbasis Android untuk Survei Kondisi Kapal oleh Owner Surveyor

    Directory of Open Access Journals (Sweden)

    Paul Stevan Haloho

    2017-01-01

    Full Text Available Survei kondisi kapal adalah survei yang dilakukan oleh seorang Owner Surveyor untuk melaporkan kondisi aktual kapal beserta bagian-bagiannya. Proses survei yang dilakukan saat ini masih dilakukan secara manual dimana seorang Owner Surveyor melakukan survei berdasarkan daftar survei yang diterbitkan oleh perusahaan pemilik kapal. Hasil survei kondisi akan disajikan dalam bentuk laporan yang nantinya akan diserahkan kepada pemilik kapal sebagai bahan pertimbangan untuk dilakukannya “repair” dan “maintenance”. Proses survei yang dilakukan saat ini tentu saja kurang efektif untuk dilakukan, mengingat tidak semua Owner Surveyor memiliki pengetahuan dan pengalaman yang sama serta proses pembuatan laporan hasil survei yang sering memakan waktu lama. Penelitian ini bertujuan untuk merancang sebuah aplikasi komputer berbasis android yang dapat membantu seorang Owner Surveyor dalam melakukan proses survei kondisi. Dalam aplikasi ini memuat fasilitas daftar survei, review survei, updating survei, dan menu untuk menambahkan Owner Surveyor. Aplikasi ini telah diujicobakan kepada beberapa responden yang memiliki pengalaman survei kapal dan pihak-pihak yang memiliki latar belakang pendidikan di bidang perkapalan. Pengujian ini dilakukan dalam bentuk kuisioner yang bertujuan untuk mengetahui penilaian para responden terhadap aplikasi ini. Dari hasil kuisioner dapat disimpulkan bahwa aplikasi ini sangat diperlukan dalam mendukung kegiatan survei kondisi kapal.

  4. The Transient High Energy Sky and Early Universe Surveyor

    Science.gov (United States)

    O'Brien, P. T.

    2016-04-01

    The Transient High Energy Sky and Early Universe Surveyor is a mission which will be proposed for the ESA M5 call. THESEUS will address multiple components in the Early Universe ESA Cosmic Vision theme:4.1 Early Universe,4.2 The Universe taking shape, and4.3 The evolving violent Universe.THESEUS aims at vastly increasing the discovery space of the high energy transient phenomena over the entire cosmic history. This is achieved via a unique payload providing an unprecedented combination of: (i) wide and deep sky monitoring in a broad energy band(0.3 keV-20 MeV; (ii) focusing capabilities in the soft X-ray band granting large grasp and high angular resolution; and (iii) on board near-IR capabilities for immediate transient identification and first redshift estimate.The THESEUS payload consists of: (i) the Soft X--ray Imager (SXI), a set of Lobster Eye (0.3--6 keV) telescopes with CCD detectors covering a total FOV of 1 sr; (ii) the X--Gamma-rays spectrometer (XGS), a non-imaging spectrometer (XGS) based on SDD+CsI, covering the same FOV than the Lobster telescope extending the THESEUS energy band up to 20 MeV; and (iii) a 70cm class InfraRed Telescope (IRT) observing up to 2 microns with imaging and moderate spectral capabilities.The main scientific goals of THESEUS are to:(a) Explore the Early Universe (cosmic dawn and reionization era) by unveiling the Gamma--Ray Burst (GRBs) population in the first billion years}, determining when did the first stars form, and investigating the re-ionization epoch, the interstellar medium (ISM) and the intergalactic medium (IGM) at high redshifts.(b) Perform an unprecedented deep survey of the soft X-ray transient Universe in order to fill the present gap in the discovery space of new classes of transient; provide a fundamental step forward in the comprehension of the physics of various classes of Galactic and extra--Galactic transients, and provide real time trigger and accurate locations of transients for follow-up with next

  5. Ground fracturing at the southern end of Summit Ridge caused by October 17, 1989 Loma Prieta, California, earthquake sequence (maps of Summit Ridge Shear Zones, en echelon tension cracks, complex and compound fractures, and small faults that formed coactively with the earthquake sequence)

    Energy Technology Data Exchange (ETDEWEB)

    Martosudarmo, S.Y. [BPP Technologi, Jakarta (Indonesia); Johnson, A.M. [Purdue Univ., West Lafayette, IN (United States). Harry Fielding Reid Earthquake Research Lab.; Fleming, R.W. [Geological Survey, Denver, CO (United States)

    1997-12-31

    The Loma Prieta earthquake of 17 October 1989 was the first of three large earthquakes that occurred in California in less than 5 years. The main shock of the Loma Prieta earthquake was deep-seated, the rupture zones of the main shock did not reach the surface, and the earthquake produced enigmatic surface ruptures along the frontal faults of the Coast Range and in the epicentral area that were explained in several quite different ways. The Landers earthquake of 28 June 1992 was near surface and produced more than 80 km of spectacular surface rupture of many different kinematic expressions. Detailed study of fractures at Landers has provided a basis for re-evaluating earlier work on fractures produced by the Loma Prieta earthquake. This paper is a description of some of the fractures produced by the Loma Prieta earthquake and a discussion of their causes. Detailed mapping (scale of 1:250) in an area on either side of Summit Road and between Morrell Cutoff Road in the northwest and the intersection of Summit Road and San Jose-Soquel Road in the southeast has provided documentation of fracture orientations and differential displacements required to decipher the ground deformation in that area during the Loma Prieta earthquake.

  6. Further Analysis on the Mystery of the Surveyor III Dust Deposits

    Science.gov (United States)

    Metzger, Philip; Hintze, Paul; Trigwell, Steven; Lane, John

    2011-01-01

    The Apollo 12 lunar module (LM) landing near the Surveyor 1lI spacecraft at the end of 1969 has remained the primary experimental verification of the predicted physics of plume ejecta effects from a rocket engine interacting with the surface of the moon. This was made possible by the return of the Surveyor 1lI camera housing by the Apollo 12 astronauts, allowing detailed analysis of the composition of dust deposited by the Apollo 12 LM plume. It was soon realized after the initial analysis of the camera housing that the LM plume tended to remove more dust than it had deposited. In the present study, coupons from the camera housing were reexamined by a KSC research team using SEM/EDS and XPS analysis. In addition, plume effects recorded in landing videos from each Apollo mission have been studied for possible clues. Several likely scenarios are proposed to explain the Surveyor III dust observations. These include electrostatic attraction of the dust to the surface of the Surveyor as a result of electrostatic charging of the jet gas exiting the engine nozzle during descent; dust blown by the Apollo 12 LM fly-by while on its descent trajectory; dust ejected from the lunar surface due to gas forced into the soil by the Surveyor 1lI rocket nozzle, based on Darcy's law; and mechanical movement of dust during the Surveyor landing. Even though an absolute answer is not possible based on available data and theory, various computational models are employed to estimate the feasibility of each of these proposed mechanisms. Scenarios are then discussed which combine multiple mechanisms to produce results consistent with observations.

  7. Effects of fracture reactivation and diagenesis on fracture network evolution: Cambrian Eriboll Formation, NW Scotland

    Science.gov (United States)

    Hooker, J. N.; Eichhubl, P.; Xu, G.; Ahn, H.; Fall, A.; Hargrove, P.; Laubach, S.; Ukar, E.

    2011-12-01

    The Cambrian Eriboll Formation quartzarenites contain abundant fractures with varying degrees of quartz cement infill. Fractures exist that are entirely sealed; are locally sealed by bridging cements but preserve pore space among bridges; are mostly open but lined with veneers of cement; or are devoid of cement. Fracture propagation in the Eriboll Formation is highly sensitive to the presence of pre-existing fractures. Fracture reactivation occurs in opening mode as individual fractures repeatedly open and are filled or bridged by syn-kinematic cements. As well, reactivation occurs in shear as opening of one fracture orientation coincides with shear displacement along pre-existing fractures of different orientations. The tendency for pre-existing fractures to slip varies in part by the extent of cement infill, yet we observe shear and opening-mode reactivation even among sealed fractures. Paleotemperature analysis of fluid inclusions within fracture cements suggests some fractures now in outcrop formed deep in the subsurface. Fractures within the Eriboll Formation may therefore affect later fracture propagation throughout geologic time. With progressive strain, fault zones develop within fracture networks by a sequence of opening-mode fracture formation, fracture reactivation and linkage, fragmentation, cataclasis, and the formation of slip surfaces. Cataclasite within fault zones is commonly more thoroughly cemented than fractures in the damage zone or outside the fault zone. This variance of cement abundance is likely the result of (1) continued exposure of freshly broken quartz surfaces within cataclasite, promoting quartz precipitation, and (2) possibly more interconnected pathways for mass transfer within the fault zone. Enhanced cementation of cataclasite results in strengthening or diagenetic strain hardening of the evolving fault zone. Further slip is accommodated by shear localization along discrete slip surfaces. With further linkage of fault segments

  8. Processes controlling the migration and biodegradation of non-aqueous phase liquids (NAPLs) within fractured rocks in the vadose zone. FY96 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Geller, J.T.; Holman, H.Y.; Conrad, M.; Pruess, K.; Hunter-Cevera, J.C. [Lawrence Berkeley National Lab., CA (United States). Earth Sciences Div.; Su, G. [Univ. of California, Berkeley, CA (United States). Dept. of Civil Engineering

    1997-02-01

    This project investigates both flow dynamics and microbial processes affecting NAPLs in fractured rock in a closely coupled, integrated manner. The objective is to develop a qualitative and quantitative understanding of the behavior of two and three immiscible fluid phases, microbial transformation and/or degradation, and to provide a scientific basis for field investigations, site characterization, and remedial action for NAPL contamination in fractured rocks. To achieve this, the program combines laboratory and theoretical investigations, coupled with the evaluation of conditions at relevant field sites. This report summarizes the work accomplished since inception of the project in April 1996.

  9. 超高水材料覆岩离层及冒落裂隙带注浆充填技术%Grouting Backfill Technology with Super High Water Material for Overburden Bed-separation and Falling Fractured Zone

    Institute of Scientific and Technical Information of China (English)

    王成真; 冯光明

    2011-01-01

    In order to the problems occurred by the great amount pressurized flowing water in the bed-separation after the traditional grouting and subsidence control technology conducted in the overburden bed-separation, in combination with the basic performances of the super water material, based on the key strata theory of the strata control as the guide, the grouting backfill technology with the super water material was provided for the overburden strata bed-separation and falling fractured zone.The technology would fully fill with the super water material in the bed-separation space, the space between the falling rocks of the falling zone and the cracks of the fractured zone.After the grouting material solidified, the filled material could control the activities of the overburden strata.The previous practical results of the overburden strata grouting and the application of the grouting and backfill technology to an imaginary coal mining face showed that the grouting and backfill with the super water material in the overburden strata bed-separation and falling fractured zone would have a subsidence reduction rate between 80% ~ 90% and would have a high production and high efficient coal mining in seam under the buildings,railway line and water body.%为了解决传统覆岩离层注浆减沉技术实施后离层区内大量承压可流动水体所带来的问题,结合超高水材料基本性能,以岩层控制的关键层理论为指导,提出了超高水材料覆岩离层及冒落裂隙带注浆充填技术.该技术将超高水材料浆液充满关键层下的离层空间、冒落带垮落矸石间缝隙以及裂缝带裂隙,凝固后的充填体控制上覆岩活动.根据以往覆岩离层注浆实践结果及超高水材料注浆充填技术在假想工作面的应用可知:超高水材料覆岩离层及冒落裂隙带注浆充填的减沉率在80%~90%,有助实现"三下"压煤开采的高产高效.

  10. Assessing the reactivation potential of pre-existing fractures in the southern Karoo, South Africa: Evaluating the potential for sustainable exploration across its Critical Zone

    Science.gov (United States)

    Dhansay, Taufeeq; Navabpour, Payman; de Wit, Maarten; Ustaszewski, Kamil

    2017-10-01

    Understanding the kinematics of pre-existing fractures under the present-day stress field is an indispensable prerequisite for hydraulically increasing fracture-induced rock permeability, i.e. through hydraulic stimulation, which forms the basis of economically viable exploitation of resources such as natural gas and geothermal energy. Predicting the likelihood of reactivating pre-existing fractures in a target reservoir at particular fluid injection pressures requires detailed knowledge of the orientations and magnitudes of the prevailing stresses as well as pore fluid pressures. In the absence of actual in-situ stress measurements, e.g. derived from boreholes, as is mostly the case in previously underexplored ;frontier areas;, such predictions are often difficult. In this study, the potential of reactivating pre-existing fractures in a likely exploration region of the southern Karoo of South Africa is investigated. The orientations of the present-day in-situ stresses were assessed from surrounding earthquake focal mechanisms, implying c. NW-SE oriented maximum horizontal stress and a stress regime changing between strike-slip and normal faulting. A comparison with paleo-stress axes derived from inverted fault-slip data suggests that the stress field very likely did not experience any significant reorientation since Cretaceous times. Maximum possible in-situ stress magnitudes are estimated by assuming that these are limited by frictional strength on pre-existing planes and subsequently, slip and dilation tendency calculations were performed, assuming hydrostatic pore fluid pressures of c. 32 MPa at targeted reservoir depth. The results suggest that prevalent E-W and NW-SE oriented sub-vertical fractures are likely to be reactivated at wellhead pressures exceeding hydrostatic pore fluid pressures by as little as 2-5 MPa, while less prevalent sub-horizontal and moderately inclined fractures require higher wellhead pressures that are still technically feasible

  11. COMPREHENSIVE GROUTING TREATMENT FOR WATER GUSHING ANALYSIS IN LIMESTONE BRECCIAS FRACTURE ZONE%灰岩角砾岩破碎带涌水综合注浆治理

    Institute of Scientific and Technical Information of China (English)

    张庆松; 韩伟伟; 李术才; 袁晏仁; 刘人太; 李金求; 孙怀凤

    2012-01-01

    Water gushing in limestone breccia fracture zone is a complex geological disaster often encountered in tunnel construction. Compared with the general water gushing in fracture rock mass, due to the poor stability of surrounding rock and rock heterogeneity, gushing treatment in limestone breccias fracture zone is very difficult. For controlling the water gushing in breccias fracture zone with high water pressure and quantity in Zhongliangshan tunnel, water analysis and transient electromagnetic detection were conducted; and groundwater source and channel were analyzed. Based on this, drainage was done first to reduce the water pressure in surrounding rock, then grouting was carried out to strengthen shallow layer. The shallow layer grouting was divided into two parts, i.e. upper part and lower part. Curtain in deep rock was done to plug water. Plugging and drainage were combined in water gushing control. Those four measures formed a comprehensive treatment method. A good control effect was achieved through choosing adaptive grouting materials and matched technology. Surrounding rock deformation and water quantity were measured and analyzed to avoid rock instability induced by grouting pressure. The comprehensive water gushing treatment method well solved the problems during grouting process in breccia fracture zone and realized informatization construction.%灰岩角砾岩破碎带涌水是岩溶隧道建设中经常遇到的地质灾害,由于破碎带围岩稳定性较差且具有较强的不均一性,与一般的裂隙岩体涌水相比,其治理难度较大.针对中梁山隧道角砾岩破碎带高压大流量涌水,进行涌水地质分析和含水区域的瞬变电磁探测,对地下水的来源和通道进行深入分析,在此基础上提出并实施先分流泄压后浅层加固、上下分区治理、深部帷幕和堵排结合的综合治理方案,通过选择适当的注浆材料和配套工艺,取得较好的治理效果.为避免注浆压力可能造

  12. The role of quantity surveyors in public–private partnerships in South Africa

    Directory of Open Access Journals (Sweden)

    Hoffie Cruywagen

    2017-05-01

    Full Text Available Background: Quantity surveyors play an important role in providing cost and contractual advice in the built environment. This article seeks to investigate the current extent of their involvement in public–private partnerships (PPPs in South Africa. Aim: The study intends to establish factors that influence quantity surveyors’ participation in PPPs. Methodology: A mixed-methods research approach was followed by firstly conducting a survey amongst South African quantity surveyors in order to determine their level of participation in PPPs. For triangulation purposes, a case study was also conducted. Results: The results of the research show that, although quantity surveyors have the corresponding skills and competencies required in a PPP project, their current involvement in PPPs in South Africa is limited and that there is a greater role they can play in future. Conclusion: Quantity surveyors are uniquely positioned to play a bigger role in the implementation of PPPs in South Africa.

  13. 120 Years of Education for Mine Surveyors in South Africa A ...

    African Journals Online (AJOL)

    Grobler, Hennie

    identified as the new centre of gravity of mining activities, where in 1903, it was ... 1The NQF level is stated as an approximate value as these qualifications have ..... in the survey department, …after obtaining his mine surveyors certificate, ...

  14. The Far-Infrared Surveyor Mission study: paper I, the genesis

    NARCIS (Netherlands)

    Meixner, M.; Cooray, A.; Carter, R.; DiPirro, M.; Flores, A.; Leisawitz, D.; Armus, L.; Battersby, C.; Bergin, E.; Bradford, C. M.; Ennico, K.; Melnick, G. J.; Milam, S.; Narayanan, D.; Pontoppidan, K.; Pope, A.; Roellig, T.; Sandstrom, K.; Su, K. Y. L.; Vieira, J.; Wright, E.; Zmuidzinas, J.; Alato, S.; Carey, S.; Gerin, M.; Helmich, F.; Menten, K.; Scott, D.; Sakon, I.; Vavrek, R.

    2016-01-01

    This paper describes the beginning of the Far-Infrared Surveyor mission study for NASA's Astrophysics Decadal 2020. We describe the scope of the study, and the open process approach of the Science and Technology Definition Team. We are currently developing the science cases and provide some prelimin

  15. The Far-Infrared Surveyor Mission study: paper I, the genesis

    NARCIS (Netherlands)

    Meixner, M.; Cooray, A.; Carter, R.; DiPirro, M.; Flores, A.; Leisawitz, D.; Armus, L.; Battersby, C.; Bergin, E.; Bradford, C. M.; Ennico, K.; Melnick, G. J.; Milam, S.; Narayanan, D.; Pontoppidan, K.; Pope, A.; Roellig, T.; Sandstrom, K.; Su, K. Y. L.; Vieira, J.; Wright, E.; Zmuidzinas, J.; Alato, S.; Carey, S.; Gerin, M.; Helmich, F.; Menten, K.; Scott, D.; Sakon, I.; Vavrek, R.

    2016-01-01

    This paper describes the beginning of the Far-Infrared Surveyor mission study for NASA's Astrophysics Decadal 2020. We describe the scope of the study, and the open process approach of the Science and Technology Definition Team. We are currently developing the science cases and provide some

  16. Identifying and Describing Tutor Archetypes: The Pragmatist, the Architect, and the Surveyor

    Science.gov (United States)

    Harootunian, Jeff A.; Quinn, Robert J.

    2008-01-01

    In this article, the authors identify and anecdotally describe three tutor archetypes: the pragmatist, the architect, and the surveyor. These descriptions, based on observations of remedial mathematics tutors at a land-grant university, shed light on a variety of philosophical beliefs regarding and pedagogical approaches to tutoring. An analysis…

  17. Modeling of fault activation and seismicity by injection directly into a fault zone associated with hydraulic fracturing of shale-gas reservoirs

    Science.gov (United States)

    LBNL, in consultation with the EPA, expanded upon a previous study by injecting directly into a 3D representation of a hypothetical fault zone located in the geologic units between the shale-gas reservoir and the drinking water aquifer.

  18. Hip Fracture

    Science.gov (United States)

    Diseases and Conditions Hip fracture By Mayo Clinic Staff A hip fracture is a serious injury, with complications that can be life-threatening. The risk of hip fracture rises with age. Older people are at a ...

  19. Mars Global Surveyor Ka-Band Frequency Data Analysis

    Science.gov (United States)

    Morabito, D.; Butman, S.; Shambayati, S.

    2000-01-01

    The Mars Global Surveyor (MGS) spacecraft, launched on November 7, 1996, carries an experimental space-to-ground telecommunications link at Ka-band (32 GHz) along with the primary X-band (8.4 GHz) downlink. The signals are simultaneously transmitted from a 1.5-in diameter parabolic high gain antenna (HGA) on MGS and received by a beam-waveguide (BWG) R&D 34-meter antenna located in NASA's Goldstone Deep Space Network (DSN) complex near Barstow, California. The projected 5-dB link advantage of Ka-band relative to X-band was confirmed in previous reports using measurements of MGS signal strength data acquired during the first two years of the link experiment from December 1996 to December 1998. Analysis of X-band and Ka-band frequency data and difference frequency (fx-fka)/3.8 data will be presented here. On board the spacecraft, a low-power sample of the X-band downlink from the transponder is upconverted to 32 GHz, the Ka-band frequency, amplified to I-W using a Solid State Power Amplifier, and radiated from the dual X/Ka HGA. The X-band signal is amplified by one of two 25 W TWTAs. An upconverter first downconverts the 8.42 GHz X-band signal to 8 GHz and then multiplies using a X4 multiplier producing the 32 GHz Ka-band frequency. The frequency source selection is performed by an RF switch which can be commanded to select a VCO (Voltage Controlled Oscillator) or USO (Ultra-Stable Oscillator) reference. The Ka-band frequency can be either coherent with the X-band downlink reference or a hybrid combination of the USO and VCO derived frequencies. The data in this study were chosen such that the Ka-band signal is purely coherent with the X-band signal, that is the downconverter is driven by the same frequency source as the X-band downlink). The ground station used to acquire the data is DSS-13, a 34-meter BWG antenna which incorporates a series of mirrors inside beam waveguide tubes which guide the energy to a subterranean pedestal room, providing a stable environment

  20. Study of Triaxial Creep Tests of Soil from Fracture Zone between the Slope Layer in Toppling Rock Slope%倾倒变形边坡层间破碎带土体三轴蠕变试验研究

    Institute of Scientific and Technical Information of China (English)

    张浴阳; 巨能攀; 周新

    2016-01-01

    倾倒变形是工程边坡变形中常见的一种形式。发生倾倒变形的影响因素很多,其中,层间破碎带的发育极大的促进了边坡倾倒变形的发生。从澜沧江某水电站的倾倒变形边坡中取样来进行三轴蠕变试验。首先,分析层间破碎带土体的蠕变特性;其次,优选出适合蠕变特征曲线的本构模型,该模型为Burgers模型,并确定该模型参数;最后,以实验的成果为依托确定了层间破碎带土体的长期强度为瞬时强度的0.47~0.58倍。这对评价倾倒变形边坡的长期稳定性有着重要的现实意义,同时也为以后类似工程提供借鉴。%Toppling deformation is a common form of slope deformation in hydraulic engineering , this phenome-non may be induced by many factors , in which the interlayer fracture zone greatly contributed to the development of slope toppling deformation .The samples to do the triaxial creep test were from toppling slope of Lancang River Hy-dropower Station .It has analyzed the creep properties of soil from interlayer fracture zone , selected the appropriate Burgers creep model and determined model parameters .Finally, based on the results of experiments , the value of the long-term strength of the interlayer fracture zone is 0.47~0.58 times that of the instantaneous intensity , which not only has important practical significance to evaluate the long-term stability of the toppling slope , but also has provided reference experience for future similar projects .

  1. Development of permeable fracture zones for exploitation of geothermal energy from hot dry rock systems; Erschliessung permeabler Risszonen fuer die Gewinnung geothermischer Energie aus heissen Tiefengesteinen

    Energy Technology Data Exchange (ETDEWEB)

    Jung, R. [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany); Baumgaertner, J. [SOCOMINE, Soultz-sous-Forets (France); Rummel, F. [Bochum Univ. (Germany); Tenzer, H. [Stadtwerke Bad Urach (Germany)

    1997-12-01

    The article describes the main results of the European Hot-Dry-Rock Project Soultz of the last 2 years. After a series of successful stimulation experiments and single-well hydraulic tests in the first deep well GPK1 (3590 m) in the previous project period the second deep well GPK2 (3876 m) was drilled during the winter 1994/95 in order to complete the doublet-system. Through the second well successfully penetrated the southern wing of the fracture system created in GPK1 the hydraulic connection was poor and a massive stimulation test had to be performed in GPK2 too. During this test a fracture system of about 1 km{sup 2} in size was stimulated in the depth range below 3200 m. This fracture system overlaps and penetrates the fracture system of borehole GPK1. (orig./AKF) [Deutsch] Der Artikel beschreibt die wesentlichen Ergebnisse des Hot-Dry-Rock Projekts Soultz der letzten beiden Jahre. Nach den erfolgreichen Einbohrloch-Tests in der Bohrung GPK1 in der vorangehenden Projektphase, bei denen ein ca. 1,5 km{sup 2} grosses kuenstliches Risssystem geschaffen wurde, aus dem infolge eines hydraulischen Anschlusses an grossraeumige permeable Stoerungszonen beachtliche Produktionsraten erzielt werden konnten, wurde im Winter 1994/95 die zweite Tiefbohrung GPK2 abgeteuft, um das Dublettensystem zu komplettieren. Trotz des erfolgreichen Abteufens der zweiten Bohrung in den Suedfluegel des bestehenden Risssystems, erwies sich der hydraulische Anschluss zunaechst als unzureichend, so dass ein massiver Stimulationstest in der neuen Bohrung angesetzt werden musste. Bei diesem Test wurden im Teufenbereich unterhalb 3200 m ein ca. 1 km{sup 2} grosses Risssystem erzeugt, das das Risssystem der Bohrung GPK1 ueberlappt und teilweise durchdringt. (orig./AKF)

  2. CHISL: the combined high-resolution and imaging spectrograph for the LUVOIR surveyor

    Science.gov (United States)

    France, Kevin; Fleming, Brian; Hoadley, Keri

    2016-07-01

    NASA is currently carrying out science and technical studies to identify its next astronomy flagship mission, slated to begin development in the 2020s. It has become clear that a Large Ultraviolet/Optical/IR (LUVOIR) Surveyor mission (dprimary ≍ 12 m, Δλ ≍ 1000 Å - 2 μm spectroscopic bandpass) can carry out the largest number of NASA's exoplanet and astrophysics science goals over the coming decades. The science grasp of a LUVOIR Surveyor is broad, ranging from the direct detection of potential biomarkers on rocky planets to the flow of matter into and out of galaxies and the history of star-formation across cosmic time. There are technical challenges for several aspects of the LUVOIR Surveyor concept, including component level technology readiness maturation and science instrument concepts for a broadly capable ultraviolet spectrograph. We present the scientific motivation for, and a preliminary design of, a multiplexed ultraviolet spectrograph to support both the exoplanet and astrophysics goals of the LUVOIR Surveyor mission concept, the Combined High-resolution and Imaging Spectrograph for the LUVOIR Surveyor (CHISL). CHISL includes a highresolution (R ≍ 120,000; 1000 - 1700Å) point-source spectroscopy channel and a medium resolution (R >= 14,000 from 1000 - 2000 Å in a single observation and R 24,000 - 35,000 in multiple grating settings) imaging spectroscopy channel. CHISL addresses topics ranging from characterizing the composition and structure of planet-forming disks to the feedback of matter between galaxies and the intergalactic medium. We present the CHISL concept, a small sample of representative science cases, and the primary technological hurdles. Technical challenges include high-efficiency ultraviolet coatings and high-quantum efficiency, large-format, photon counting detectors. We are actively engaged in laboratory and flight characterization efforts for all of these enabling technologies as components on sounding rocket payloads under

  3. The role of advection and dispersion in the rock matrix on the transport of leaking CO2-saturated brine along a fractured zone

    Science.gov (United States)

    Ahmad, Nawaz; Wörman, Anders; Sanchez-Vila, Xavier; Bottacin-Busolin, Andrea

    2016-12-01

    CO2 that is injected into a geological storage reservoir can leak in dissolved form because of brine displacement from the reservoir, which is caused by large-scale groundwater motion. Simulations of the reactive transport of leaking CO2aq along a conducting fracture in a clay-rich caprock are conducted to analyze the effect of various physical and geochemical processes. Whilst several modeling transport studies along rock fractures have considered diffusion as the only transport process in the surrounding rock matrix (diffusive transport), this study analyzes the combined role of advection and dispersion in the rock matrix in addition to diffusion (advection-dominated transport) on the migration of CO2aq along a leakage pathway and its conversion in geochemical reactions. A sensitivity analysis is performed to quantify the effect of fluid velocity and dispersivity. Variations in the porosity and permeability of the medium are found in response to calcite dissolution and precipitation along the leakage pathway. We observe that advection and dispersion in the rock matrix play a significant role in the overall transport process. For the parameters that were used in this study, advection-dominated transport increased the leakage of CO2aq from the reservoir by nearly 305%, caused faster transport and increased the mass conversion of CO2aq in geochemical reactions along the transport pathway by approximately 12.20% compared to diffusive transport.

  4. Classification of subtrochanteric femoral fractures.

    Science.gov (United States)

    Loizou, C L; McNamara, I; Ahmed, K; Pryor, G A; Parker, M J

    2010-07-01

    A review of the literature identified 15 different classification methods for subtrochanteric femoral fractures. Only eight of those classifications defined the area of bone, which constituted a subtrochanteric fracture. The actual length of femur defined as the subtrochanteric zone varied from 3 cm up to the level of the femoral isthmus. There was no agreement between the different classifications regarding the proximal and distal border or for those fractures, which traverse anatomical boundaries. In the various classifications, fractures were subdivided into 2-15 subgroups. The majority of the identified studies were unable to find the classifications useful in either determining treatment or predicting the outcome after treatment. We subdivided subtrochanteric fractures into three types based on the degree of fracture comminution. We examined the inter- and intra-observer agreement of our recommended classification. One orthopaedic consultant, one specialist hip fracture surgeon, two trainee registrar orthopaedic surgeons and one specialty trainee in orthopaedics, on two different occasions, 8 weeks apart, independently classified the radiographs of 20 patients with a subtrochanteric fracture. The mean kappa value for inter- and intra-observer variation was 0.71 and 0.79, respectively, with both showing substantial agreement and, therefore, this simpler classification is recommended. Based on the review of previous classification methods, we also recommend that the subtrochanteric zone be defined as the one in which the fracture line crossing the femur is predominantly within the area of bone extending 5 cm below the lower border of the lesser trochanter.

  5. Further Analysis on the Mystery of the Surveyor III Dust Deposits

    Science.gov (United States)

    Metzger, Philip; Hintze, Paul; Trigwell, Steven; Lane, John

    2012-01-01

    The Apollo 12 lunar module (LM) landing near the Surveyor III spacecraft at the end of 1969 has remained the primary experimental verification of the predicted physics of plume ejecta effects from a rocket engine interacting with the surface of the moon. This was made possible by the return of the Surveyor III camera housing by the Apollo 12 astronauts, allowing detailed analysis of the composition of dust deposited by the LM plume. It was soon realized after the initial analysis of the camera housing that the LM plume tended to remove more dust than it had deposited. In the present study, coupons from the camera housing have been reexamined. In addition, plume effects recorded in landing videos from each Apollo mission have been studied for possible clues.

  6. Solar wind rare gas analysis: Trapped solar wind helium and neon in Surveyor 3 material

    Science.gov (United States)

    Buehler, F.; Eberhardt, P.; Geiss, J.; Schwarzmueller, J.

    1972-01-01

    The He-4 and Ne-20 contents in sections of the Surveyor 3 support strut samples were determined by optical and scanning electron microscopy and are compared to the results of the Apollo solar wind composition (SWC) experiments. The He-4/Ne-20 ratio in the samples from the sunlit side of the strut was approximately 300; the ratios determined in Apollo 12 lunar fines and SWC foil were below 100. The He-4/He-3 ratios were also determined, and the ratio obtained from Surveyor 3 material is higher than those found with Apollo 11 and 12 SWC experiments. The effects of spallation by cosmic rays or solar protons, stripping by cosmic ray or energetic solar alpha particles, recycling of solar wind He and radiogenic Ne, He from terrestrial atmosphere, mass discrimination near the moon, mass dependence of trapping probability, diffusion, and contamination by lunar dust are considered.

  7. The Cosmology Large Angular Scale Surveyor (CLASS): 38 GHz detector array of bolometric polarimeters

    CERN Document Server

    Appel, John W; Amiri, Mandana; Araujo, Derek; Bennett, Charles L; Boone, Fletcher; Chan, Manwei; Cho, Hsiao-Mei; Chuss, David T; Colazo, Felipe; Crowe, Erik; Denis, Kevin; Dunner, Rolando; Eimer, Joseph; Essinger-Hileman, Thomas; Gothe, Dominik; Halpern, Mark; Harrington, Kathleen; Hilton, Gene; Hinshaw, Gary F; Huang, Caroline; Irwin, Kent; Jones, Glenn; Karakla, John; Kogut, Alan J; Larson, David; Limon, Michele; Lowry, Lindsay; Marriage, Tobias; Mehrle, Nicholas; Miller, Amber D; Miller, Nathan; Moseleyb, Samuel H; Novakh, Giles; Reintsemad, Carl; Rostemab, Karwan; Stevensonb, Thomas; Towner, Deborah; U-Yen, Kongpop; Wagner, Emily; Watts, Duncan; Wollack, Edward; Xu, Zhilei; Zeng, Lingzhen

    2014-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) experiment aims to map the polarization of the Cosmic Microwave Background (CMB) at angular scales larger than a few degrees. Operating from Cerro Toco in the Atacama Desert of Chile, it will observe over 65% of the sky at 38, 93, 148, and 217 GHz. In this paper we discuss the design, construction, and characterization of the CLASS 38 GHz detector focal plane, the first ever Q-band bolometric polarimeter array.

  8. The Cosmology Large Angular Scale Surveyor (CLASS): 38 GHz Detector Array of Bolometric Polarimeters

    Science.gov (United States)

    Appel, John W.; Ali, Aamir; Amiri, Mandana; Araujo, Derek; Bennett, Charles L.; Boone, Fletcher; Chan, Manwei; Cho, Hsiao-Mei; Chuss, David T.; Colazo, Felipe; Crowe, Erik; Denis, Kevin; Dunner, Rolando; Eimer, Joseph; Essinger-Hileman, Thomas; Gothe, Dominik; Halpern, Mark; Harrington, Kathleen; Kogut, Alan J..; Miller, Nathan; Moseley, Samuel H.; Stevenson, Thomas; Towner, Deborah; U-Yen, Kongpop; Wollack, Edward

    2014-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) experiment aims to map the polarization of the Cosmic Microwave Background (CMB) at angular scales larger than a few degrees. Operating from Cerro Toco in the Atacama Desert of Chile, it will observe over 65% of the sky at 38, 93, 148, and 217 GHz. In this paper we discuss the design, construction, and characterization of the CLASS 38 GHz detector focal plane, the first ever Q-band bolometric polarimeter array.

  9. Correlates of job satisfaction amongst quantity surveyors in consulting firms in Lagos, Nigeria

    Directory of Open Access Journals (Sweden)

    Henry Ndubuisi Onukwube

    2012-05-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE Job satisfaction is the sense of well- being, good feeling and positive mental state that emerge in an incumbent worker when his obtained reward consequent upon his performance is congruent with his equitable reward.The aim of this study is to ascertain the levels of job satisfaction amongst quantity surveyors in consulting firms in Lagos, Nigeria. Biographical and job descriptive index questionnaires (JDI were administered to gather the data. The JDI measures job satisfaction on five facets, namely, pay, promotions, supervision, co-workers and the work itself. A total of 100 questionnaires were collected and used for the study. The survey covered quantity surveyors in consulting firms in Lagos and the respondents were selected using stratified random sampling technique. Data collected were analysed using descriptive statistics, correlation matrix, t-test and one way anova. Findings of the study revealed that the respondents were satisfied with the relationship with co-workers, nature of work and the supervision they receive. Major sources of dissatisfaction are promotion and salaries of the respondents. This finding is a bold step and necessary benchmark for resolving major sources of dissatisfaction among quantity surveyors in consulting firms. The roles of other contextual factors on job satisfaction need to be contemplated for future research.

  10. Correlates of job satisfaction amongst quantity surveyors in consulting firms in Lagos, Nigeria

    Directory of Open Access Journals (Sweden)

    Henry Ndubuisi Onukwube

    2012-05-01

    Full Text Available Job satisfaction is the sense of well- being, good feeling and positive mental state that emerge in an incumbent worker when his obtained reward consequent upon his performance is congruent with his equitable reward.The aim of this study is to ascertain the levels of job satisfaction amongst quantity surveyors in consulting firms in Lagos, Nigeria. Biographical and job descriptive index questionnaires (JDI were administered to gather the data. The JDI measures job satisfaction on five facets, namely, pay, promotions, supervision, co-workers and the work itself. A total of 100 questionnaires were collected and used for the study. The survey covered quantity surveyors in consulting firms in Lagos and the respondents were selected using stratified random sampling technique. Data collected were analysed using descriptive statistics, correlation matrix, t-test and one way anova. Findings of the study revealed that the respondents were satisfied with the relationship with co-workers, nature of work and the supervision they receive. Major sources of dissatisfaction are promotion and salaries of the respondents. This finding is a bold step and necessary benchmark for resolving major sources of dissatisfaction among quantity surveyors in consulting firms. The roles of other contextual factors on job satisfaction need to be contemplated for future research.

  11. Assessment of Cost Management Functions of Quantity Surveyors with Lean Methodology

    Directory of Open Access Journals (Sweden)

    Maroof Opeyemi Anifowose

    2013-11-01

    Full Text Available The Construction industry in Nigeria is made up of a wide variety of activities which include the provision of professional and technical services to clients in the built environment. Despite the provision of these services to a large number of clients worldwide, the construction industry is still awash by the chronic problems of low productivity, insufficient quality, time over-runs, and poor safety, which hinder customer delivered value. The Just-In-Time phenomenon is a characteristic of lean production systems which operate with very little “fat” (e.g. excess inventory extra workers, wasted space.This study aimed at assessing the construction management function of the quantity surveyor in line with the principle of lean methodology (Just-In-Time. This was achieved by exploring the cost management function of the quantity surveyor, to investigate the current practice of cost management by quantity surveying firms. Data for the study were sourced primarily with the use of questionnaire and the subsequent data analysis, which employed the use of descriptive analysis of presenting the data as obtained on tables during the field survey and attempts a rudimentary establishment of patterns using percentages. The study concluded amongst others, that: all activities involved in the cost management function of the quantity surveyor are important, and value adding, corresponding to conversion activities in line with the Just-In-time/lean methodology

  12. Perancangan Aplikasi Komputer Berbasis Android untuk Panduan Pengawasan Pembangunan Kapal Baru oleh Owner Surveyor

    Directory of Open Access Journals (Sweden)

    Joshua Adrian Lasuardi

    2017-01-01

    Full Text Available Kegiatan pengawasan pembangunan kapal baru yang ada saat ini masih dilakukan secara manual dimana seorang owner surveyor melakukan pengawasan mengacu pada form pengawasan. Kegiatan pengawasan yang ada saat ini kurang efektif untuk dilakukan pada proses pembangunan kapal baru, hal ini dikarenakan tidak semua owner surveyor memiliki pengetahuan dan pengalaman yang sama. Tujuan dari tugas akhir ini adalah melakukan observasi sistem pengawasan pembangunan kapal baru yang ada saat ini, merancang aplikasi komputer berbasis android untuk panduan pengawasan pembangunan kapal baru, dan melakukan uji validitas aplikasi tersebut dalam meningkatkan efektivitas pengawasan pembangunan kapal baru. Perancangan aplikasi dilakukan dengan pembuatan mock up aplikasi, desain interface, perancangan database, dan pengkodingan aplikasi tersebut. Aplikasi ini memiliki fitur daftar proses pengawasan, review hasil pengawasan, progress pembangunan kapal, dan menu untuk menambahkan owner surveyor. Uji coba aplikasi ini dilakukan kepada beberapa responden yang memiliki pengalaman pengawasan pembangunan kapal baru dan pihak-pihak yang memiliki latar belakang pendidikan di bidang perkapalan. Dari hasil pengujian menggunakan kuisoner tersebut diperoleh kesimpulan bahwa aplikasi ini perlu diaplikasikan dalam mendukung proses pengawasan pembangunan kapal baru.

  13. [Atlas fractures].

    Science.gov (United States)

    Schären, S; Jeanneret, B

    1999-05-01

    Fractures of the atlas account for 1-2% of all vertebral fractures. We divide atlas fractures into 5 groups: isolated fractures of the anterior arch of the atlas, isolated fractures of the posterior arch, combined fractures of the anterior and posterior arch (so-called Jefferson fractures), isolated fractures of the lateral mass and fractures of the transverse process. Isolated fractures of the anterior or posterior arch are benign and are treated conservatively with a soft collar until the neck pain has disappeared. Jefferson fractures are divided into stable and unstable fracture depending on the integrity of the transverse ligament. Stable Jefferson fractures are treated conservatively with good outcome while unstable Jefferson fractures are probably best treated operatively with a posterior atlanto-axial or occipito-axial stabilization and fusion. The authors preferred treatment modality is the immediate open reduction of the dislocated lateral masses combined with a stabilization in the reduced position using a transarticular screw fixation C1/C2 according to Magerl. This has the advantage of saving the atlanto-occipital joints and offering an immediate stability which makes immobilization in an halo or Minerva cast superfluous. In late instabilities C1/2 with incongruency of the lateral masses occurring after primary conservative treatment, an occipito-cervical fusion is indicated. Isolated fractures of the lateral masses are very rare and may, if the lateral mass is totally destroyed, be a reason for an occipito-cervical fusion. Fractures of the transverse processes may be the cause for a thrombosis of the vertebral artery. No treatment is necessary for the fracture itself.

  14. Root fractures

    DEFF Research Database (Denmark)

    Andreasen, Jens Ove; Christensen, Søren Steno Ahrensburg; Tsilingaridis, Georgios

    2012-01-01

    The purpose of this study was to analyze tooth loss after root fractures and to assess the influence of the type of healing and the location of the root fracture. Furthermore, the actual cause of tooth loss was analyzed.......The purpose of this study was to analyze tooth loss after root fractures and to assess the influence of the type of healing and the location of the root fracture. Furthermore, the actual cause of tooth loss was analyzed....

  15. Stress Fractures

    Science.gov (United States)

    Stress fractures Overview Stress fractures are tiny cracks in a bone. They're caused by repetitive force, often from overuse — such as repeatedly jumping up and down or running long distances. Stress fractures can also arise from normal use of ...

  16. Probe into Crossing Roof Caved Goaf in Fault Fracture Zone with Conduit Pre-Grouting%超前导管注浆过断层破碎带顶板冒落区的实践

    Institute of Scientific and Technical Information of China (English)

    李国福; 皮云生

    2011-01-01

    曲江井-822m总回石门在深部掘进,压力大,巷道还需要穿过F1、F4大断层,围岩以炭质页岩为主,断层附近及断层破碎带中顶板压力特别明显,顶板岩石随掘随冒,结合施工现场特殊的地质条件,采用具有针对性的支护方式,实现安全生产。%In view of the geological conditions in construction site of deep heading at-822 m general return crosscut,such as need of crossing F1 and F4 fault,obvious roof pressure near or in fault fracture zone,and breakage of roof rock at all times because of carbonaceous shale-oriented adjoining rock,the authors probe into adopting focused support patterns to realize production safety.

  17. Tracking a northern fulmar from a Scottish nesting site to the Charlie-Gibbs Fracture Zone: Evidence of linkage between coastal breeding seabirds and Mid-Atlantic Ridge feeding sites

    Science.gov (United States)

    Edwards, Ewan W. J.; Quinn, Lucy R.; Wakefield, Ewan D.; Miller, Peter I.; Thompson, Paul M.

    2013-12-01

    The seas above mid-ocean ridges are biodiversity hotspots in an otherwise largely oligotrophic environment, but the nature and extent of linkage between these offshore regimes and coastal ecosystems remains uncertain. Using a combination of GPS and geolocation tracking data, we show that a male fulmar, breeding on the Scottish coast, foraged over areas of persistent thermal fronts along the Charlie-Gibbs Fracture Zone (CGFZ) of the Mid-Atlantic Ridge during the incubation period. The bird travelled over 6200 km in 14.9 days. First-passage time analysis identified seven areas of restricted search, four on the shelf and three in the vicinity of the Mid-Atlantic Ridge. Previous studies of incubation foraging trip durations at this site suggest that a trip of this duration is unusual, and further work is required to assess the extent to which different individuals use these offshore resources. Nevertheless, these data highlight the potential importance of high sea areas beyond the limits of national jurisdiction when considering the management and conservation of seabirds breeding in NW Europe, and raises the potential for even greater linkage between the CGFZ and seabirds breeding colonies in other regions.

  18. Tissue and size-related changes in the fatty acid and stable isotope signatures of the deep sea grenadier fish Coryphaenoides armatus from the Charlie-Gibbs Fracture Zone region of the Mid-Atlantic Ridge

    Science.gov (United States)

    Mayor, Daniel J.; Sharples, Caroline J.; Webster, Lynda; Walsham, Pamela; Lacaze, Jean-Pierre; Cousins, Nicola J.

    2013-12-01

    Coryphaenoides armatus is a cosmopolitan deep-sea fish that plays a major role in the ecology of abyssal ecosystems. We investigated the trophic ecology and physiology of this species by determining the δ13C, δ15N and fatty acid signatures of muscle, liver and ovary tissues of individuals collected from ∼2700 m to the north and south of the Charlie-Gibbs Fracture Zone (CGFZ) of the Mid-Atlantic Ridge, NE Atlantic. Fatty acid and δ13C data both suggested that C. armatus shows an ontogenetic dietary shift, with the relative contributions of benthic and pelagic prey decreasing and increasing respectively as the animals grow. They also indicated that dietary overlap between animals living to the north and south of the CGFZ increases as they grow, suggesting that larger animals forage over greater distances and are not hindered by the presence of the CGFZ. Comparison of tissue-specific fatty acid signatures with previously published data suggests compositional homeostasis of the fatty acids 20:5(n-3) and 22:6(n-3) in the muscle, and 18:1(n-9) in the liver tissues. We ascribe this primarily to strict physiological requirements for these compounds, rather than simply to their abundance in the diet. We pose several speculative mechanisms to explain the observed trends in tissue-specific δ13C and δ15N values, illustrating some of the numerous processes that can influence the isotopic signatures of bulk tissues.

  19. Analysis of Surveyor 3 television cable after residence on the moon

    Science.gov (United States)

    Gross, F. C.; Park, J. J.

    1972-01-01

    The Apollo 12 astronauts brought the Surveyor III television camera back from the moon in November 1969. Chemical analyses of a portion of television cable revealed changes in the glass fabric sleeve and in the wire insulation as a result of exposure to the lunar environment. Loss of volatile constituents from the glass fabric and a discoloration of the glass occurred. The Teflon layer on the wire showed a slight discoloration and possibly a slight change in its infrared spectrum. Both the polyimide layer and the Teflon layer of the wire insulation showed changes in tensile strength and elongation.

  20. Solar wind modulation of the Martian ionosphere observed by Mars Global Surveyor

    Directory of Open Access Journals (Sweden)

    J.-S. Wang

    2004-06-01

    Full Text Available Electron density profiles in the Martian ionosphere observed by the radio occultation experiment on board Mars Global Surveyor have been analyzed to determine if the densities are influenced by the solar wind. Evidence is presented that the altitude of the maximum ionospheric electron density shows a positive correlation to the energetic proton flux in the solar wind. The solar wind modulation of the Martian ionosphere can be attributed to heating of the neutral atmosphere by the solar wind energetic proton precipitation. The modulation is observed to be most prominent at high solar zenith angles. It is argued that this is consistent with the proposed modulation mechanism.

  1. Different multidisciplinary approaches of two traumatic teeth fractures in the esthetic zone:a case report%运用改良牙冠延长术及种植术处理美学区外伤所致残根残冠1例

    Institute of Scientific and Technical Information of China (English)

    贾雪婷; 甄敏; 胡文杰; 刘云松

    2015-01-01

    SUMMARY In this article , different methods to deal with teeth fractures were discussed by presenting a case of traumatic crown-root fracture in the anterior esthetic zone .The traumatic crown-root fracture is a common problem in clinic .When a fracture line locates in close proximity to or below the alveolar bone crest , the fracture most likely involve the junctional epithelium and the connective tissue attachment .This type of fracture becomes a challenge for restorative dentists because it involves biologic , functional , and es-thetic considerations , especially when the fracture occurs in an esthetic area .In this case , a young patient presented with two fractured upper anterior teeth to the Department of Periodontics , Peking University School and Hospital of Stomatology .After the comprehensive clinical evaluation , the right central incisor was decided to extract for implant therapy and the right lateral incisor was decided to retain by one modified crown lengthening surgery .The most common technique applied to save a retained root is a clinical crown lengthening procedure .However , the aggressive alveolar bone resection of both target and adjacent teeth to reestablish the bone width and periodontal health may compromise functional and esthetic outcomes .To re-duce loss of excessive osseous tissue during osteotomy procedure , the modified crown lengthening of the right lateral incisor was performed , including minor bone resection and root reshaping .Regarding the right central incisor , the retained root was all located below the alveolar bone crest .The extraction and implant procedure , combined with guided bone graft were performed to avoid the damage to neighbor teeth during traditional restorative therapy and to reshape a preferable buccal contour .At the last visit , the patient was recalled with healthy periodontium , normal tooth function and favorable esthetic results .

  2. Surveyor Manual

    DEFF Research Database (Denmark)

    Blyt, Henrik; Hessellund, Regner Bæk

    providing the qualification of ‘building maintenance technician’. Being addressed to people seeking jobs, but also to professionals already working in domains connected to the administration and maintenance of building stock, such as local administration, public and private companies owning buildings, SMEs...

  3. Discussion on the Methods for Determining the Height of Fractured Water-conducting Zone%采动覆岩导水断裂带发育高度研究方法探讨

    Institute of Scientific and Technical Information of China (English)

    李宏杰; 黎灵; 李健; 姜鹏; 舒宗运

    2015-01-01

    导水断裂带高度是留设防隔水煤(岩)柱和水体下采煤安全性评估的重要参数,对矿井安全生产、保水采煤和生态保护具有重要实用价值。对经验法、现场实测、物理模法和数值模拟法等导水断裂带确定方法进行了总结、对比和实例分析,总结了各种方法的实用条件、优缺点,建议采用2种及以上综合观测和探测方法,以相互验证。以现场钻孔漏失液观测和钻孔电视观测为主,物探探测方法为辅来确定导水断裂带高度,采用物理模拟或数值模拟方法作为辅助研究方法从面和立体角度进行覆岩破坏规律动态研究,形成以点到面再到空间的全方位综合探测与分析技术方法体系,为煤(岩)柱合理留设、水体下安全采煤提供了重要依据和技术支撑。%The height of fractured water-conducting zone is the important parameter for determining waterproof coal pillar and evaluating the coal mining safety under the water,and has the important practical value for the safety in production of coal mine,water preserved mining and ecological protection. The empirical formula method,field measurement method,physical sim-ulation and numerical simulation method of fractured water-conducting zone determination is summarized and compared. The practical conditions,advantages and disadvantages of various methods were summarized. The comprehensive observation and detection of two methods or more is recommended to verify each other. The field water leakage observation and borehole TV are used as the main methods,and the geophysical detection method as auxiliary means are determined the height of water-conduc-ting zone. The physical simulation or numerical simulation method are also as the auxiliary to make the dynamic study on over-burden strata failure law from the plane and three-dimensional perspective, forming the integrated exploration and analysis methodology from point to plane and to space

  4. Interface Fracture in Adhesively Bonded Shell Structures

    DEFF Research Database (Denmark)

    Jensen, Henrik Myhre

    2007-01-01

    Two methods for the prediction of crack propagation through the interface of adhesively bonded shells are discussed. One is based on a fracture mechanics approach; the other is based on a cohesive zone approach. Attention is focussed on predicting the shape of the crack front and the critical...... stress required to propagate the crack under quasi-static conditions. The fracture mechanical model is theoretically sound and it is accurate and numerically stable. The cohesive zone model has some advantages over the fracture mechanics based model. It is easier to generalise the cohesive zone model...... to take into account effects such as plastic deformation in the adhering shells, and to take into account effects of large local curvatures of the interface crack front. The comparison shows a convergence of the results based on the cohesive zone model towards the results based on a fracture mechanics...

  5. [Acetabular fractures].

    Science.gov (United States)

    Gänsslen, A; Oestern, H J

    2011-12-01

    Treatment of acetabular fractures requires extensive knowledge of the bony anatomy, the amount of possible exposure of the bone with the selected approaches and fracture type-dependent indications of operative treatment. Classification of the fracture with detailed analysis of the fracture morphology is the basis for decision making and planning. The primary treatment aim is the anatomic reconstruction of the acetabulum which results in optimal long-term results.The basis of this overview is the presentation of standard treatment concepts in acetabular fracture surgery. Beside characteristics of the acetabular bony anatomy, biomechanical and pathomechanical principles and the relevant radiological anatomy, the treatment options, both conservative and operative and basic principles of the indications for standard surgical approaches will be discussed.The special fracture type is discussed in detail regarding incidence, injury mechanism, concomitant injuries, options for conservative and operative treatment, quality of operative reduction and long-term results.Furthermore, epidemiological data on typical postoperative complications are evaluated.

  6. The X-Ray Surveyor mission concept study: forging the path to NASA astrophysics 2020 decadal survey prioritization

    Science.gov (United States)

    Gaskin, Jessica; Özel, Feryal; Vikhlinin, Alexey

    2016-07-01

    The X-Ray Surveyor mission concept is unique among those being studied for prioritization in the NASA Astrophysics 2020 Decadal Survey. The X-Ray Surveyor mission will explore the high-energy Universe; providing essential and complimentary observations to the Astronomy Community. The NASA Astrophysics Roadmap (Enduring Quests, Daring Visions) describes the need for an X-Ray Observatory that is capable of addressing topics such as the origin and growth of the first supermassive black holes, galaxy evolution and growth of the cosmic structure, and the origin and evolution of the stars that make up our Universe. To address these scientifically compelling topics and more, an Observatory that exhibits leaps in capability over that of previous X-Ray Observatories in needed. This paper describes the current status of the X-Ray Surveyor Mission Concept Study and the path forward, which includes scientific investigations, technology development, and community participation.

  7. The X-Ray Surveyor Mission Concept Study: Forging the Path to NASA Astrophysics 2020 Decadal Survey Prioritization

    Science.gov (United States)

    Gaskin, Jessica; Ozel, Feryal; Vikhlinin, Alexey

    2016-01-01

    The X-Ray Surveyor mission concept is unique among those being studied for prioritization in the NASA Astrophysics 2020 Decadal Survey. The X-Ray Surveyor mission will explore the high-energy Universe; providing essential and complimentary observations to the Astronomy Community. The NASA Astrophysics Roadmap (Enduring Quests, Daring Visions) describes the need for an X-Ray Observatory that is capable of addressing topics such as the origin and growth of the first supermassive black holes, galaxy evolution and growth of the cosmic structure, and the origin and evolution of the stars that make up our Universe. To address these scientifically compelling topics and more, an Observatory that exhibits leaps in capability over that of previous X-Ray Observatories in needed. This paper describes the current status of the X-Ray Surveyor Mission Concept Study and the path forward, which includes scientific investigations, technology development, and community participation.

  8. Application of geophysical methods for fracture characterization

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K.H.; Majer, E.L. [Lawrence Berkeley Lab., CA (USA); McEvilly, T.V. [Lawrence Berkeley Lab., CA (USA)]|[California Univ., Berkeley, CA (USA). Dept. of Geology and Geophysics; Morrison, H.F. [Lawrence Berkeley Lab., CA (USA)]|[California Univ., Berkeley, CA (USA). Dept. of Materials Science and Mineral Engineering

    1990-01-01

    One of the most crucial needs in the design and implementation of an underground waste isolation facility is a reliable method for the detection and characterization of fractures in zones away from boreholes or subsurface workings. Geophysical methods may represent a solution to this problem. If fractures represent anomalies in the elastic properties or conductive properties of the rocks, then the seismic and electrical techniques may be useful in detecting and characterizing fracture properties. 7 refs., 3 figs.

  9. Sports fractures.

    OpenAIRE

    DeCoster, T. A.; Stevens, M. A.; Albright, J. P.

    1994-01-01

    Fractures occur in athletes and dramatically influence performance during competitive and recreational activities. Fractures occur in athletes as the result of repetitive stress, acute sports-related trauma and trauma outside of athletics. The literature provides general guidelines for treatment as well as a variety of statistics on the epidemiology of fractures by sport and level of participation. Athletes are healthy and motivated patients, and have high expectations regarding their level o...

  10. Surveyor nuclease detection of mutations and polymorphisms of mtDNA in children.

    Science.gov (United States)

    Pilch, Jacek; Asman, Marek; Jamroz, Ewa; Kajor, Maciej; Kotrys-Puchalska, Elżbieta; Goss, Małgorzata; Krzak, Maria; Witecka, Joanna; Gmiński, Jan; Sieroń, Aleksander L

    2010-11-01

    Mitochondrial encephalomyopathies are complex disorders with wide range of clinical manifestations. Particularly time-consuming is the identification of mutations in mitochondrial DNA. A group of 20 children with clinical manifestations of mitochondrial encephalomyopathies was selected for molecular studies. The aims were (a) to identify mutations in mtDNA isolated from muscle and (b) to verify detected mutations in DNA isolated from blood, in order to assess the utility of a Surveyor nuclease assay kit for patient screening. The most common changes found were polymorphisms, including a few missense mutations altering the amino acid sequence of mitochondrial proteins. In two boys with MELAS (i.e., mitochondrial myopathy, encephalopathy, lactic acidosis, and stroke-like episodes), a mutation A→G3243 was detected in the tRNALeu gene of mtDNA isolated from muscle and blood. In one boy, the carrier status of his mother was confirmed, based on molecular analysis of DNA isolated from blood. A method using Surveyor nuclease allows systematic screening for small mutations in mtDNA, using as its source blood of the patients and asymptomatic carriers. The method still requires confirmation studying a larger group. In some patients, the use of this method should precede and might limit indications for traumatic muscle and skin biopsy.

  11. Hamate fractures.

    Science.gov (United States)

    Sarabia Condés, J M; Ibañez Martínez, L; Sánchez Carrasco, M A; Carrillo Julia, F J; Salmerón Martínez, E L

    2015-01-01

    The purpose of this paper is to present our experience in the treatment of the fractures of the hamate and to make a review of the literature on this topic. We retrospectively reviewed 10 patients treated in our clinic between 2005-2012 suffering from fractures of the hamate. Six cases were fractures of the body and four were fractures of the hamate. Five cases were of associated injuries. Diagnostic delay ranged from 30 days to 2 years. Patient follow-up ranged from 1 to 10 years. Patient satisfaction was evaluated using the DASH questionnaire. Five patients with a fracture of the body underwent surgery, and one was treated conservatively. Two patients with fracture of the hook of the hamate were treated with immobilization, and two more patients had the fragment removed. The grip strength and the digital clip were reduced in 2 cases. Flexion and extension of the wrist was limited in 3 cases. The mobility of the fingers was normal in all the cases, except in one. The results obtained from the DASH questionnaire were normal in all the cases, except in one case of fracture of the hamate, and in two cases of fracture of the body. The surgical treatment should reduce the dislocation and stabilize the injuries with osteosynthesis. The fractures of the hamate are usually diagnosed late, and the most recommended treatment is removal of the fragment, although it cannot be deduced from this study. Copyright © 2014 SECOT. Published by Elsevier Espana. All rights reserved.

  12. Colles Fracture

    OpenAIRE

    Sánchez León, Belisario; Facultad de Medicina, Universidad Nacional Mayor de San Marcos, Lima, Perú

    2014-01-01

    Our expertise is the study of more than 2,000 cases of Colles' fractures. Colles name should in this case to synthesize the type of fractures of the lower end of the radius. There have been various proposed classifications according to the different fracture lines can be demonstrated radiologically in the region of the wrist. We believe that these ratings should only be retained if the concept of the articular fracture or not in the classical sense, since it has great value in the functional ...

  13. Complex ridge-transform evolution and mantle exhumation at the St. Paul fracture zone system, Equatorial Alantic. Preliminary results from the COLMEIA cruise

    Science.gov (United States)

    Maia, M.; Sichel, S. E.; Santos, R.; Birot, D.; Brachet, C.; Brehme, I.; Briais, A.; Brunelli, D.; Campos, T.; Colosio, A.; de Moraes, E.; Donval, J.; Fontes, F.; Gaspar, F.; Guyader, V.; Hemond, C.; Konn, C.; Marcondes, M.; Motoki, A.; berengere, M.; Moura, D.; Pessanha, I.; Scalabrin, C.; Vale, E.

    2013-12-01

    peridotitic ridges as attested by sampling. The southern segment shows few short, symmetric ridges made of peridotite and gabbros. Both the central and the southern segments display asymmetric core complexes nucleating at segments ends. This variety of off-axis morphologies suggest that accretionary processes along the intra-transform segments are unstable and highly variable in space and time. Thus, significant variations in the spreading style were recognized, with a more magmatic northern segment and comparatively less magmatic central and southern segments. However, the existence of long-lived, gabbro cored, core complexes at the western flanks of these later segments suggests that lacking of magma extrusion and presence of mantle-derived rocks at ridge axis, is possibly generated by a reduced efficiency of melt extraction, instead of a reduced magma primary production. We postulate this regime to be controlled by a cold, thick lithosphere where magma is preferentially retained in the crust to create large gabbro bodies. Another striking result is the evidence for compressive stresses across the area, which can be linked to the uplift of the Saint Paul massif. An intense tectonic deformation is attested by the large presence of ultramafic and mafic-derived mylonites associated to km-large shear and thrust zones.

  14. Imaging hydraulic fractures by microseismic migration for downhole monitoring system

    Science.gov (United States)

    Lin, Ye; Zhang, Haijiang

    2016-12-01

    It has been a challenge to accurately characterize fracture zones created by hydraulic fracturing from microseismic event locations. This is because generally detected events are not complete due to the associated low signal to noise ratio and some fracturing stages may not produce microseismic events even if fractures are well developed. As a result, spatial distribution of microseismic events may not well represent fractured zones by hydraulic fracturing. Here, we propose a new way to characterize the fractured zones by reverse time migration (RTM) of microseismic waveforms from some events. This is based on the fact that fractures filled with proppants and other fluids can act as strong scatterers for seismic waves. Therefore, for multi-stage hydraulic fracturing, recorded waveforms from microseismic events induced in a more recent stage may be scattered by fractured zones from previous stages. Through RTM of microseismic waveforms in the current stage, we can determine fractured zones created in previous stages by imaging area of strong scattering. We test the feasibility of this method using synthetic models with different configurations of microseismic event locations and borehole sensor positions for a 2D downhole microseismic monitoring system. Synthetic tests show that with a few events fractured zones can be directly imaged and thus the stimulated reservoir volume (SRV) can be estimated. Compared to the conventional location-based SRV estimation method, the proposed new method does not depend on the completeness of detected events and only a limited number of detected and located events are necessary for characterizing fracture distribution. For simplicity, the 2D model is used for illustrating the concept of microseismic RTM for imaging the fracture zone but the method can be adapted to real cases in the future.

  15. On the Fictitious Crack Model of Concrete Fracture

    DEFF Research Database (Denmark)

    Brincker, Rune; Dahl, Henrik

    in the fracture zone is discussed, and an alternative energy formulation is given and males it possible to distinguish between stable and unstable situations. The reformulated sub-structure method is implemented on computer in a way that makes it possible to use a multilinear stress......-crack-opening-displacement relation for the material in the fracture zone, and some qualitative results are given....

  16. 高地应力断层破碎带衬砌力学特性对比与分析%Comparison and Analysis of Mechanical Properties of Lining in Fault Fracture Zone with High Geostress

    Institute of Scientific and Technical Information of China (English)

    刘凯; 孔超; 唐浚哲; 徐雨平

    2014-01-01

    On the basis of a given tunnel through fault fracture zone with high ground stress, the paper analyzes the spatial distribution of stress field of rock mass by simulation with 3D numerals. First, the lining structure in elastic state is determined based on the calculation results of elastic lining model. Second, lining structure as elastic-plastic one is assumed to simulate the excavation with Finite Difference Software FLAC3D. The results show that elastic-plastic lining structure should be used when a tunnel running through high ground stress and fault fracture zone is simulated;there is a big difference between elastic lining structure and elastic-plastic lining structure when they are applied to simulate the dynamic process of excavation respectively and displacement at the key-points in the elastic model;approximately 50% of key-points displacement in Mohr-Coulomb model is smaller than that in Mohr-Coulomb model;the disturbance range of principal stress at crown and at side is 0. 5 B ( B is the width of tunnel ) before z=-50 m ( central plane) plane and 1. 5B after z=-50 m; the disturbance range of principal stress at side foot is 1 B before z=-50 m and 0. 5 B after z=-50 m; the principal stress of elastic-plastic lining structure is higher than that of elastic lining structure;and the research reveals failure mode and potential failure surface.%以高地应力区某穿越断层破碎带隧道为工程依托,通过三维数值模拟来分析随着掌子面推进过程中的围岩空间应力场的状态及其变化趋势。首先,根据弹性衬砌模型计算结果判断衬砌结构是否还处于弹性状态;其次,按照弹塑性衬砌模型进行某穿越高地应力断层破碎带隧道三维数值模拟。计算结果表明:高地应力区穿越断层破碎带隧道三维数值模拟应该采用弹塑性衬砌结构;弹性计算模型与摩尔—伦计算模型分别计算所得衬砌结构关键点位移量差别较大,弹性衬砌模型

  17. Monitoring percolation of a conductive tracer, as a proxy for nitrate transport, through glacial till and fractured sandstone in the vadose zone underlying a potato field, using 3D cross-hole electrical resistivity imaging

    Science.gov (United States)

    Wang, S.; Butler, K. E.; Serban, D.; Petersen, B.; Grimmett, M.

    2016-12-01

    Nitrate is a necessary nutrient for crops, but high surface water and groundwater concentrations can negatively affect aquatic ecosystem and human health. At AAFC-AAC Harrington Research Farm (PEI, Canada), 3D cross-hole electrical resistivity imaging (ERI) is being used to investigate the percolation of a conductive tracer (KCl) through a 17 m thick vadose zone as a proxy for the transport of nitrate under natural recharge conditions. The objectives are to investigate the effect of heterogeneity on transport pathways and infer how long it would take for changes in farming practices at the surface to affect nitrate loading to the underlying aquifer. The resistivity array consists of 96 permanently installed electrodes - 24 at 0.68 m spacing in each of three 16 m deep boreholes arranged in a triangle with 9 m sides, and 24 at 1 m spacing buried in shallow trenches connecting the boreholes. A background survey revealed five sub-horizontal layers of alternating resistivity in general agreement with the geology of 6 m soil and glacial till overburden overlying interbedded sandstone and shaley sandstone layers. On March 27th, 2015, 1.1 m of snow was removed from a 15.2 m2 area positioned symmetrically inside the triangular array and 100 kg of granular KCl was distributed on the ground surface. The removed snow was immediately replaced to await the spring thaw. Post-tracer surveys indicate tracer had percolated to depths of 1 m, 1.2 m, 3.0 m and 3.5 m by the 4th, 26th, 30th, and 46th days after tracer application. Its movement slowed significantly by early May, 2015, with the end of snow melt. Tracer spread laterally very slowly through the summer and early fall, 2015, but has remained within the triangular array. The shallow conductivity anomaly produced by the tracer diminished significantly over the winter and spring of 2016 but showed little evidence of bulk matrix flow below 3.5 m depth. It is speculated that fractures in the glacial till, too thin to be resolved by

  18. Fracture Mechanics

    CERN Document Server

    Zehnder, Alan T

    2012-01-01

    Fracture mechanics is a vast and growing field. This book develops the basic elements needed for both fracture research and engineering practice. The emphasis is on continuum mechanics models for energy flows and crack-tip stress- and deformation fields in elastic and elastic-plastic materials. In addition to a brief discussion of computational fracture methods, the text includes practical sections on fracture criteria, fracture toughness testing, and methods for measuring stress intensity factors and energy release rates. Class-tested at Cornell, this book is designed for students, researchers and practitioners interested in understanding and contributing to a diverse and vital field of knowledge. Alan Zehnder joined the faculty at Cornell University in 1988. Since then he has served in a number of leadership roles including Chair of the Department of Theoretical and Applied Mechanics, and Director of the Sibley School of Mechanical and Aerospace Engineering.  He teaches applied mechanics and his research t...

  19. The ecosystem of the Mid-Atlantic Ridge at the sub-polar front and Charlie-Gibbs Fracture Zone; ECO-MAR project strategy and description of the sampling programme 2007-2010

    Science.gov (United States)

    Priede, Imants G.; Billett, David S. M.; Brierley, Andrew S.; Hoelzel, A. Rus; Inall, Mark; Miller, Peter I.; Cousins, Nicola J.; Shields, Mark A.; Fujii, Toyonobu

    2013-12-01

    The ECOMAR project investigated photosynthetically-supported life on the North Mid-Atlantic Ridge (MAR) between the Azores and Iceland focussing on the Charlie-Gibbs Fracture Zone area in the vicinity of the sub-polar front where the North Atlantic Current crosses the MAR. Repeat visits were made to four stations at 2500 m depth on the flanks of the MAR in the years 2007-2010; a pair of northern stations at 54°N in cold water north of the sub-polar front and southern stations at 49°N in warmer water influenced by eddies from the North Atlantic Current. At each station an instrumented mooring was deployed with current meters and sediment traps (100 and 1000 m above the sea floor) to sample downward flux of particulate matter. The patterns of water flow, fronts, primary production and export flux in the region were studied by a combination of remote sensing and in situ measurements. Sonar, tow nets and profilers sampled pelagic fauna over the MAR. Swath bathymetry surveys across the ridge revealed sediment-covered flat terraces parallel to the axis of the MAR with intervening steep rocky slopes. Otter trawls, megacores, baited traps and a suite of tools carried by the R.O.V. Isis including push cores, grabs and a suction device collected benthic fauna. Video and photo surveys were also conducted using the SHRIMP towed vehicle and the R.O.V. Isis. Additional surveying and sampling by landers and R.O.V. focussed on the summit of a seamount (48°44‧N, 28°10‧W) on the western crest of the MAR between the two southern stations.

  20. On the Characteristics of Rheological Fracture of Rock%岩石的蠕变断裂特性分析

    Institute of Scientific and Technical Information of China (English)

    陈有亮; 秦爱芳; 金孝杰

    2000-01-01

    Based on the traditional theory of fracture, time-dependence of rock fracture is taken into account and the creep fracture criteria are given. The effect of the microcrack zone on fracture toughness is analyzed. Finally, a model for time prediction of rheological fracture is derived and its feasibility is proven.

  1. Knowledge and Attitudes of Nursing Home Staff and Surveyors about the Revised Federal Guidance for Incontinence Care

    Science.gov (United States)

    DuBeau, Catherine E.; Ouslander, Joseph G.; Palmer, Mary H.

    2007-01-01

    Purpose: We assessed nursing home staff and state nursing home surveyors regarding their knowledge and attitudes about urinary incontinence, its management, and the revised federal Tag F315 guidance for urinary incontinence. Design and Methods: We conducted a questionnaire survey of a convenience sample of nursing home staff and state nursing home…

  2. Comparison of T7E1 and surveyor mismatch cleavage assays to detect mutations triggered by engineered nucleases.

    Science.gov (United States)

    Vouillot, Léna; Thélie, Aurore; Pollet, Nicolas

    2015-01-07

    Genome editing using engineered nucleases is used for targeted mutagenesis. But because genome editing does not target all loci with similar efficiencies, the mutation hit-rate at a given locus needs to be evaluated. The analysis of mutants obtained using engineered nucleases requires specific methods for mutation detection, and the enzyme mismatch cleavage method is used commonly for this purpose. This method uses enzymes that cleave heteroduplex DNA at mismatches and extrahelical loops formed by single or multiple nucleotides. Bacteriophage resolvases and single-stranded nucleases are used commonly in the assay but have not been compared side-by-side on mutations obtained by engineered nucleases. We present the first comparison of the sensitivity of T7E1 and Surveyor EMC assays on deletions and point mutations obtained by zinc finger nuclease targeting in frog embryos. We report the mutation detection limits and efficiencies of T7E1 and Surveyor. In addition, we find that T7E1 outperforms the Surveyor nuclease in terms of sensitivity with deletion substrates, whereas Surveyor is better for detecting single nucleotide changes. We conclude that T7E1 is the preferred enzyme to scan mutations triggered by engineered nucleases.

  3. Energetic particles detected by the Electron Reflectometer instrument on the Mars Global Surveyor, 1999-2006

    DEFF Research Database (Denmark)

    Delory, Gregory T.; Luhmann, Janet G.; Brain, David

    2012-01-01

    We report the observation of galactic cosmic rays and solar energetic particles by the Electron Reflectometer instrument aboard the Mars Global Surveyor (MGS) spacecraft from May of 1999 to the mission conclusion in November 2006. Originally designed to detect low-energy electrons, the Electron...... Reflectometer also measured particles with energies >30 MeV that penetrated the aluminum housing of the instrument and were detected directly by microchannel plates in the instrument interior. Using a combination of theoretical and experimental results, we show how the Electron Reflectometer microchannel plates...... recorded high energy galactic cosmic rays with similar to 45% efficiency. Comparisons of this data to galactic cosmic ray proton fluxes obtained from the Advanced Composition Explorer yield agreement to within 10% and reveal the expected solar cycle modulation as well as shorter timescale variations. Solar...

  4. Proton Cyclotron Waves Upstream from Mars: Observations from Mars Global Surveyor

    CERN Document Server

    Romanelli, Norberto; Gomez, Daniel; Mazelle, Christian; Delva, Magda

    2013-01-01

    We present a study on the properties of electromagnetic plasma waves in the region upstream of the Martian bow shock, detected by the magnetometer and electron reflectometer (MAG / ER) onboard the Mars Global Surveyor (MGS) spacecraft during the period known as Science Phasing Orbits (SPO). The frequency of these waves, measured in the MGS reference frame (SC), is close to the local proton cyclotron frequency. Minimum variance analysis (MVA) shows that these 'proton cyclotron frequency' waves (PCWs) are characterized - in the SC frame - by a left-hand, elliptical polarization and propagate almost parallel to the background magnetic field. They also have a small degree of compressibility and an amplitude that decreases with the increase of the interplanetary magnetic field (IMF) cone angle and radial distance from the planet. The latter result supports the idea that the source of these waves is Mars. In addition, we find that these waves are not associated with the foreshock . Empirical evidence and theoretica...

  5. Lybia Montes: A Safe, Ancient Cratered Terrain, Mars Surveyor Landing Site at the Isidis Basin Rim

    Science.gov (United States)

    Haldemann, A. F. C.; Anderson, R. C.; Harbert, W.

    2000-01-01

    The Isidis basin rim may be key to understanding Mars' past with future lander missions: this area enables the mission objective to explore Mars' climatic and geologic history, including the search for liquid water and evidence of prior or extant life in ancient terrains. While two safe candidate landIng sites for Mars Pathfinder were identified in Isidis Planitia, and one is being pursued for the Mars Surveyor 2001 Lander, the region around Isidis Planitia. in contrast to Tharsis for example, has only been lightly studied. The advent of new high resolution data sets provides an opportunity to re-assess the geologic context of this Impact basin and its rim within the Martian geologic sequence as a candidate site for studying Mars' ancient cratered terrain and ancient hydrosphere. This reexamination is warranted by the various hypotheses that Isidis was once filled with ice or water.

  6. Fracture mechanics

    CERN Document Server

    Perez, Nestor

    2017-01-01

    The second edition of this textbook includes a refined presentation of concepts in each chapter, additional examples; new problems and sections, such as conformal mapping and mechanical behavior of wood; while retaining all the features of the original book. The material included in this book is based upon the development of analytical and numerical procedures pertinent to particular fields of linear elastic fracture mechanics (LEFM) and plastic fracture mechanics (PFM), including mixed-mode-loading interaction. The mathematical approach undertaken herein is coupled with a brief review of several fracture theories available in cited references, along with many color images and figures. Dynamic fracture mechanics is included through the field of fatigue and Charpy impact testing. Explains computational and engineering approaches for solving crack-related problems using straightforward mathematics that facilitate comprehension of the physical meaning of crack growth processes; Expands computational understandin...

  7. Fracture mechanics

    Science.gov (United States)

    Shannon, John L., Jr.

    1986-01-01

    The application of fracture mechanics to the design of ceramic structures will require the precise measurement of crack growth and fracture resistance of these materials over their entire range of anticipated service temperatures and standardized test methods for making such measurements. The development of a standard test for measuring the plane strain fracture toughness is sought. Stress intensity factor coefficients were determined for three varieties of chevron-notch specimens, and fracture toughness measurements were made on silicon nitrides, silicon carbides, and aluminum oxides to assess the performance of each specimen variety. It was determined that silicon nitride and silicon carbides have flat crack growth resistance curves, but aluminum oxide does not. Additionally, batch-to-batch differences were noticed for the aluminum oxide. Experiments are continuing to explain the rising crack growth resistance and batch-to-batch variations for the aluminum oxide.

  8. Research into the Safety Zone in Treatment of Radial Neck Fracture with Titanium Plate%钛板治疗桡骨颈骨折置入安全区方法的研究

    Institute of Scientific and Technical Information of China (English)

    郭家全; 许光耀; 李玲; 牛志强; 郭振中; 索赛; 于景川; 史瑞超; 褚会军; 焦弘升

    2015-01-01

    目的:研究桡骨颈骨折置入钛板时安全区位置和置入安全区方法,避免影响前臂旋转范围,减少对神经和血运损伤,最大程度恢复前臂功能。方法回顾性研究我院自2010年7月至2014年7月收治32例无合并伤的单纯桡骨颈骨折,其中男26例,女6例,年龄15~60岁,平均(35.4±0.5)岁。致伤原因:摔伤25例,车祸伤4例,高处坠落伤2例,打架伤1例。根据 Steele 和 Gtrham 方法把桡骨颈骨折的严重程度分为四级,本次研究病例中,其中2级24例,3级5例,4级3例。桡骨颈骨折均行钛板固定治疗,采取 Kocher 入路切开复位,术中采用前臂旋后法标记安全区后缘,然后旋前前臂,根据后缘预放置钛板,找到钛板固定位置,经该处切开关节囊,放置钛板固定,钛板长度不超过3 cm,术后行康复锻炼。根据 Steele 和 Gtrham 评价标准来评价结果。结果32例患者均获随访,随访时间12~24个月,平均16个月。结果示骨折愈合时间3~6个月,平均4个月。本组病例未发现感染、神经损伤,未发现桡骨头坏死和骨折不愈合病例。仅1例患者因术后恐惧疼痛,不行锻炼,制动时间较长,导致关节僵硬,后经康复治疗,功能好转,但仍部分受限。根据 Steele 和 Gtrham 评价标准进行评价,优27例,良4例,一般1例,优良率为96.8%。结论经该法切开复位钛板固定桡骨颈骨折,术后肘关节及前臂功能恢复良好。通过寻找安全区置入钛板,配合手术技巧减少神经和血运损伤,可最大程度恢复肘关节和前臂功能。%Objective To study the position of the safety zone to put the titanium plate and placement methods,and avoid side effects on the forearm's rotating range and reducing damages of nerve and blood supply system,so as to realize maximum function recovery of the forearm. Methods 32 cases of simple radial neck fracture without

  9. Thanks to CERN's team of surveyors, the Organization's stand at the Night of Science attracted a large number of visitors : the technology and tools used by the surveyors, such as the Terrameter shown here, attracted many visitors to the CERN stand

    CERN Multimedia

    2004-01-01

    Thanks to CERN's team of surveyors, the Organization's stand at the Night of Science attracted a large number of visitors : the technology and tools used by the surveyors, such as the Terrameter shown here, attracted many visitors to the CERN stand

  10. McMC-based AVAZ direct inversion for fracture weaknesses

    Science.gov (United States)

    Pan, Xinpeng; Zhang, Guangzhi; Chen, Huaizhen; Yin, Xingyao

    2017-03-01

    more stably, and it turns out that fracture-developed zones can be identified using the estimated fracture weaknesses.

  11. Natural thermal convection in fractured porous media

    Science.gov (United States)

    Adler, P. M.; Mezon, C.; Mourzenko, V.; Thovert, J. F.; Antoine, R.; Finizola, A.

    2015-12-01

    In the crust, fractures/faults can provide preferential pathways for fluid flow or act as barriers preventing the flow across these structures. In hydrothermal systems (usually found in fractured rock masses), these discontinuities may play a critical role at various scales, controlling fluid flows and heat transfer. The thermal convection is numerically computed in 3D fluid satured fractured porous media. Fractures are inserted as discrete objects, randomly distributed over a damaged volume, which is a fraction of the total volume. The fluid is assumed to satisfy Darcy's law in the fractures and in the porous medium with exchanges between them. All simulations were made for Rayleigh numbers (Ra) equilibrium with the medium), cubic boxes and closed-top conditions. Checks were performed on an unfractured porous medium and the convection cells do start for the theoretical value of Ra, namely 4p². 2D convection was verified up to Ra=800. The influence of parameters such as fracture aperture (or fracture transmissivity), fracture density and fracture length is studied. Moreover, these models are compared to porous media with the same macroscopic permeability. Preliminary results show that the non-uniqueness associated with initial conditions which makes possible either 2D or 3D convection in porous media (Schubert & Straus 1979) is no longer true for fractured porous media (at least for 50fracture density and fracture aperture on the Nusselt number (Nu) is highly Ra dependent. The effect of the damaged zone on Nu is roughly proportional to its size. All these models also allows us to determine for which range of fracture density the fractured porous medium is in good agreement with an unfractured porous medium of the same bulk permeability.

  12. When do fractured media become seismically anisotropic? Some implications on quantifying fracture properties

    Science.gov (United States)

    Yousef, B. M.; Angus, D. A.

    2016-06-01

    Fractures are pervasive features within the Earth's crust and they have a significant influence on the multi-physical response of the subsurface. The presence of coherent fracture sets often leads to observable seismic anisotropy enabling seismic techniques to remotely locate and characterise fracture systems. In this study, we confirm the general scale-dependence of seismic anisotropy and provide new results specific to shear-wave splitting (SWS). We find that SWS develops under conditions when the ratio of wavelength to fracture size (λS / d) is greater than 3, where Rayleigh scattering from coherent fractures leads to an effective anisotropy such that effective medium model (EMM) theory is qualitatively valid. When 1 scattering, where no effective anisotropy develops and hence the SWS measurements are unstable. When λS / d scattering and begin to see behaviour similar to transverse isotropy. We find that seismic anisotropy is more sensitive to fracture density than fracture compliance ratio. More importantly, we observe that the transition from scattering to an effective anisotropic regime occurs over a propagation distance between 1 and 2 wavelengths depending on the fracture density and compliance ratio. The existence of a transition zone means that inversion of seismic anisotropy parameters based on EMM will be fundamentally biased. More importantly, we observe that linear slip EMM commonly used in inverting fracture properties is inconsistent with our results and leads to errors of approximately 400% in fracture spacing (equivalent to fracture density) and 60% in fracture compliance. Although EMM representations can yield reliable estimates of fracture orientation and spatial location, our results show that EMM representations will systematically fail in providing quantitatively accurate estimates of other physical fracture properties, such as fracture density and compliance. Thus more robust and accurate quantitative estimates of in situ fracture

  13. Galeazzi fracture.

    Science.gov (United States)

    Atesok, Kivanc I; Jupiter, Jesse B; Weiss, Arnold-Peter C

    2011-10-01

    Galeazzi fracture is a fracture of the radial diaphysis with disruption at the distal radioulnar joint (DRUJ). Typically, the mechanism of injury is forceful axial loading and torsion of the forearm. Diagnosis is established on radiographic evaluation. Underdiagnosis is common because disruption of the ligamentous restraints of the DRUJ may be overlooked. Nonsurgical management with anatomic reduction and immobilization in a long-arm cast has been successful in children. In adults, nonsurgical treatment typically fails because of deforming forces acting on the distal radius and DRUJ. Open reduction and internal fixation is the preferred surgical option. Anatomic reduction and rigid fixation should be followed by intraoperative assessment of the DRUJ. Further intraoperative interventions are based on the reducibility and postreduction stability of the DRUJ. Misdiagnosis or inadequate management of Galeazzi fracture may result in disabling complications, such as DRUJ instability, malunion, limited forearm range of motion, chronic wrist pain, and osteoarthritis.

  14. Fracture Detection and Mapping

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, Norman E.; Iovenitti, Joseph L.

    1986-01-21

    Because the costs of drilling, completing, and testing a well can be extremely high, it is important to develop better tools and methods for locating high permeability zones prior to drilling, and to develop better tools and methods for identifying and characterizing major fracture zones during the drilling and well testing stages. At the recommendation of the LBL Industry Review Panel on Geothermal Reservoir Technology, we organized and convened a one-day workshop this past July to discuss various aspects of DOE's current and planned activities in fracture detection, to review the geothermal industry's near-term and long-term research needs, to determine the priority of those needs, to disseminate to industry the status of research in progress, and to discuss the possibility of future joint research between industry and DOE. In this paper we present a brief overview of the workshop from the perspective of those who participated in it and provided us with written comments to a questionnaire that was distributed.

  15. Fracture detection and mapping

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, N.E.; Iovenitti, J.L.

    1986-03-01

    Because the costs of drilling, completing, and testing a well can be extremely high, it is important to develop better tools and methods for locating high permeability zones prior to drilling, and to develop better tools and methods for identifying and characterizing major fracture zones during the drilling and well testing stages. At the recommendation of the LBL Industry Review Panel on Geothermal Reservoir Technology, we organized and convened a one-day workshop this past July to discuss various aspects of DOE's current and planned activities in fracture detection, to review the geothermal industry's near-term and long-term research needs, to determine the priority of those needs, to disseminate to industry the status of research in progress, and to discuss the possibility of future joint research between industry and DOE. In this paper we present a brief overview of the workshop from the perspective of those who participated in it and provided us with written comments to a questionnaire that was distributed.

  16. Application of borehole geophysics to fracture identification and characterization in low porosity limestones and dolostones

    Energy Technology Data Exchange (ETDEWEB)

    Haase, C.S.; King, H.L.

    1986-01-01

    Geophysical logging was conducted in exploratory core holes drilled for geohydrological investigations at three sites used for waste disposal on the US Department of Energy's Oak Ridge Reservation. Geophysical log response was calibrated to borehole geology using the drill core. Subsequently, the logs were used to identify fractures and fractured zones and to characterize the hydrologic activity of such zones. Results of the study were used to identify zones of ground water movement and to select targets for subsequent piezometer and monitoring well installation. Neutron porosity, long- and short-normal resistivity, and density logs exhibit anomalies only adjacent to pervasively fractured zones and rarely exhibit anomalies adjacent to individual fractures, suggesting that such logs have insufficient resolution to detect individual fractures. Spontaneous potential, single point resistance, acoustic velocity, and acoustic variable density logs, however, typically exhibit anomalies adjacent to both individual fractures and fracture zones. Correlation is excellent between fracture density logs prepared from the examination of drill core and fractures identified by the analysis of a suite of geophysical logs that have differing spatial resolution characteristics. Results of the study demonstrate the importance of (1) calibrating geophysical log response to drill core from a site, and (2) running a comprehensive suite of geophysical logs that can evaluate both large- and small-scale rock features. Once geophysical log responses to site-specific geological features have been established, logs provide a means of identifying fracture zones and discriminating between hydrologically active and inactive fracture zones. 9 figs.

  17. Fracture Blisters

    Directory of Open Access Journals (Sweden)

    Uebbing, Claire M

    2011-02-01

    Full Text Available Fracture blisters are a relatively uncommon complication of fractures in locations of the body, such as the ankle, wrist elbow and foot, where skin adheres tightly to bone with little subcutaneous fat cushioning. The blister that results resembles that of a second degree burn.These blisters significantly alter treatment, making it difficult to splint or cast and often overlying ideal surgical incision sites. Review of the literature reveals no consensus on management; however, most authors agree on early treatment prior to blister formation or delay until blister resolution before attempting surgical correction or stabilization. [West J Emerg Med. 2011;12(1;131-133.

  18. The stretch zone of automotive steel sheets

    Indian Academy of Sciences (India)

    Ľ Ambriško; L Pešek

    2014-04-01

    The paper deals with an experimental determination of the stretch zone dimensions in the notch tip in thin steel sheets. The stretch zone dimensions depend on steel grade, on the rolling direction as well as on the loading rate. Stretch zones were observed and measured on three steel grades. Fracture area and stretch zones were analysed by SEM. Stable crack growth was monitored by videoextensometry techniques on CT (Compact Tension) specimens. Specimens were loaded under two loading rates by eccentric tension, whereby the deformation in the notch surrounding area was recorded using a non-contact measurement–videoextensometry technique. Linear relation between the stretch zone dimensions was determined.

  19. The MESSIER surveyor: unveiling the ultra-low surface brightness universe

    Science.gov (United States)

    Valls-Gabaud, David; MESSIER Collaboration

    2017-03-01

    The MESSIER surveyor is a small mission designed at exploring the very low surface brightness universe. The satellite will drift-scan the entire sky in 6 filters covering the 200-1000 nm range, reaching unprecedented surface brightness levels of 34 and 37 mag arcsec-2 in the optical and UV, respectively. These levels are required to achieve the two main science goals of the mission: to critically test the ΛCDM paradigm of structure formation through (1) the detection and characterisation of ultra-faint dwarf galaxies, which are predicted to be extremely abundant around normal galaxies, but which remain elusive; and (2) tracing the cosmic web, which feeds dark matter and baryons into galactic haloes, and which may contain the reservoir of missing baryons at low redshifts. A large number of science cases, ranging from stellar mass loss episodes to intracluster light through fluctuations in the cosmological UV-optical background radiation are free by-products of the full-sky maps produced.

  20. Status and path forward for the large ultraviolet/optical/infrared surveyor (LUVOIR) mission concept study

    Science.gov (United States)

    Crooke, Julie A.; Roberge, Aki; Domagal-Goldman, Shawn D.; Mandell, Avi M.; Bolcar, Matthew R.; Rioux, Norman M.; Perez, Mario R.; Smith, Erin C.

    2016-07-01

    In preparation of the 2020 Astrophysics Decadal Survey, National Aeronautics and Space Administration (NASA) has commenced a process for the astronomical community to study several large mission concepts leveraging the lessons learned from past Decadal Surveys. This will enable the Decadal Survey committee to make more informed recommendations to NASA on its astrophysics science and mission priorities with respect to cost and risk. Four astrophysics large mission concepts were identified. Each of them had a Science and Technology Definition Teem (STDT) chartered to produce scientifically compelling, feasible, and executable design reference mission (DRM) concepts to present to the 2020 Decadal Survey. In addition, The Aerospace Corporation will perform an independent cost and technical evaluation (CATE) of each of these mission concept studies in advance of the 2020 Decadal Survey, by interacting with the STDTs to provide detailed technical details on certain areas for which "deep dives" are appropriate. This paper presents the status and path forward for one of the four large mission concepts, namely, the Large UltraViolet, Optical, InfraRed surveyor (LUVOIR).

  1. The Role of County Surveyors and County Drainage Boards in Addressing Water Quality

    Science.gov (United States)

    Dunn, Mike; Mullendore, Nathan; de Jalon, Silvestre Garcia; Prokopy, Linda Stalker

    2016-06-01

    Water quality problems stemming from the Midwestern U.S. agricultural landscape have been widely recognized and documented. The Midwestern state of Indiana contains tens of thousands of miles of regulated drains that represent biotic communities that comprise the headwaters of the state's many rivers and creeks. Traditional management, however, reduces these waterways to their most basic function as conveyances, ignoring their role in the ecosystem as hosts for biotic and abiotic processes that actively regulate the fate and transport of nutrients and farm chemicals. Novel techniques and practices such as the two-stage ditch, denitrifying bioreactor, and constructed wetlands represent promising alternatives to traditional management approaches, yet many of these tools remain underutilized. To date, conservation efforts and research have focused on increasing the voluntary adoption of practices among agricultural producers. Comparatively little attention has been paid to the roles of the drainage professionals responsible for the management of waterways and regulated drains. To address this gap, we draw on survey responses from 39 county surveyors and 85 drainage board members operating in Indiana. By examining the backgrounds, attitudes, and actions of these individuals, we consider their role in advocating and implementing novel conservation practices.

  2. The Cosmology Large Angular Scale Surveyor (CLASS): 40 GHz Optical Design

    Science.gov (United States)

    Eimer, Joseph R.; Bennett, Charles L.; Chuss, David T.; Marriage, Tobias; Wollack, Edward J.; Zeng, Lingzhen

    2012-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) instrument will measure the polarization of the cosmic microwave background at 40, 90, and 150 GHz from Cerro Toco in the Atacama desert of northern Chile. In this paper, we describe the optical design of the 40 GHz telescope system. The telescope is a diffraction limited catadioptric design consisting of a front-end Variable-delay Polarization Modulator (VPM), two ambient temperature mirrors, two cryogenic dielectric lenses, thermal blocking filters, and an array of 36 smooth-wall scalar feedhorn antennas. The feed horns guide the signal to antenna-coupled transition-edge sensor (TES) bolometers. Polarization diplexing and bandpass definition are handled on the same microchip as the TES. The feed horn beams are truncated with 10 dB edge taper by a 4 K Lyot-stop to limit detector loading from stray light and control the edge illumination of the front-end VPM. The field-of-view is 19 deg x 14 deg with a resolution for each beam on the sky of 1.5 deg. FWHM.

  3. Long-Term Cryogenic Propellant Storage for the Titan Orbiter Polar Surveyor (TOPS) Mission

    Science.gov (United States)

    Mustafi, Shuvo; Francis, John; Li, Xiaoyi; DeLee, Hudson; Purves, Lloyd; Willis, Dewey; Nixon, Conor; Mcguinness, Dan; Riall, Sara; Devine, Matt; hide

    2015-01-01

    Cryogenic propellants such as liquid hydrogen (LH2) and liquid oxygen (LOX) can dramatically enhance NASAs ability to explore the solar system because of their superior specific impulse (Isp) capability. Although these cryogenic propellants can be challenging to manage and store, they allow significant mass advantages over traditional hypergolic propulsion systems and are therefore technically enabling for many planetary science missions. New cryogenic storage techniques such as subcooling and the use of advanced insulation and low thermal conductivity support structures will allow for the long term storage and use of cryogenic propellants for solar system exploration and hence allow NASA to deliver more payloads to targets of interest, launch on smaller and less expensive launch vehicles, or both. Employing cryogenic propellants will allow NASA to perform missions to planetary destinations that would not be possible with the use of traditional hypergolic propellants. These new cryogenic storage technologies were implemented in a design study for the Titan Orbiter Polar Surveyor (TOPS) mission, with LH2 and LOX as propellants, and the resulting spacecraft design was able to achieve a 43 launch mass reduction over a TOPS mission, that utilized a conventional hypergolic propulsion system with mono-methyl hydrazine (MMH) and nitrogen tetroxide (NTO) propellants. This paper describes the cryogenic propellant storage design for the TOPS mission and demonstrates how these cryogenic propellants are stored passively for a decade-long Titan mission.

  4. Development of x-ray microcalorimeter imaging spectrometers for the X-ray Surveyor mission concept

    Science.gov (United States)

    Bandler, Simon R.; Adams, Joseph S.; Chervenak, James A.; Datesman, Aaron M.; Eckart, Megan E.; Finkbeiner, Fred M.; Kelley, Richard L.; Kilbourne, Caroline A.; Betancourt-Martinez, Gabriele; Miniussi, Antoine R.; Porter, Frederick S.; Sadleir, John E.; Sakai, Kazuhiro; Smith, Stephen J.; Stevenson, Thomas R.; Wakeham, Nicholas A.; Wassell, Edward J.; Yoon, Wonsik; Becker, Dan; Bennett, Douglas; Doriese, William B.; Fowler, Joseph W.; Gard, Johnathan D.; Hilton, Gene C.; Mates, Benjamin; Morgan, Kelsey M.; Reintsema, Carl D.; Swetz, Daniel; Ullom, Joel N.; Chaudhuri, Saptarshi; Irwin, Kent D.; Lee, Sang-Jun; Vikhlinin, Alexey

    2016-07-01

    Four astrophysics missions are currently being studied by NASA as candidate large missions to be chosen in the 2020 astrophysics decadal survey.1 One of these missions is the "X-Ray Surveyor" (XRS), and possible configurations of this mission are currently under study by a science and technology definition team (STDT). One of the key instruments under study is an X-ray microcalorimeter, and the requirements for such an instrument are currently under discussion. In this paper we review some different detector options that exist for this instrument, and discuss what array formats might be possible. We have developed one design option that utilizes either transition-edge sensor (TES) or magnetically coupled calorimeters (MCC) in pixel array-sizes approaching 100 kilo-pixels. To reduce the number of sensors read out to a plausible scale, we have assumed detector geometries in which a thermal sensor such a TES or MCC can read out a sub-array of 20-25 individual 1" pixels. In this paper we describe the development status of these detectors, and also discuss the different options that exist for reading out the very large number of pixels.

  5. The Cosmology Large Angular Scale Surveyor (CLASS): 40 GHz optical design

    CERN Document Server

    Eimer, Joseph R; Chuss, David T; Marriage, Tobias A; Wollack, Edward J; Zeng, Lingzhen; 10.1117/12.925464

    2012-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) instrument will measure the polarization of the cosmic microwave background at 40, 90, and 150 GHz from Cerro Toco in the Atacama desert of northern Chile. In this paper, we describe the optical design of the 40 GHz telescope system. The telescope is a diffraction limited catadioptric design consisting of a front-end Variable-delay Polarization Modulator (VPM), two ambient temperature mirrors, two cryogenic dielectric lenses, thermal blocking filters, and an array of 36 smooth-wall scalar feedhorn antennas. The feed horns guide the signal to antenna-coupled transition-edge sensor (TES) bolometers. Polarization diplexing and bandpass definition are handled on the same microchip as the TES. The feed horn beams are truncated with 10 dB edge taper by a 4 K Lyot-stop to limit detector loading from stray light and control the edge illumination of the front-end VPM. The field-of-view is 19deg x 14deg with a resolution for each beam on the sky of 1.5deg FWHM.

  6. Future Japanese X-ray TES Calorimeter Satellite: DIOS (Diffuse Intergalactic Oxygen Surveyor)

    Science.gov (United States)

    Yamada, S.; Ohashi, T.; Ishisaki, Y.; Ezoe, Y.; Miyazaki, N.; Kuwabara, K.; Kuromaru, G.; Suzuki, S.; Mitsuda, K.; Yamasaki, N. Y.; Takei, Y.; Sakai, K.; Nagayoshi, K.; Yamamoto, R.; Hayashi, T.; Muramatsu, H.; Tawara, Y.; Mitsuishi, I.; Babazaki, Y.; Nakamichi, R.; Bandai, A.; Yuasa, T.; Ota, N.

    2016-08-01

    We present the latest update and progress on the future Japanese X-ray satellite mission Diffuse Intergalactic Oxygen Surveyor (DIOS). DIOS is proposed to JAXA as a small satellite mission, and would be launched with an Epsilon rocket. DIOS would carry on the legacy of ASTRO-H, which carries semiconductor-based microcalorimeters and is scheduled to be launched in 2016, in high-resolution X-ray spectroscopy. A 400-pixel array of transition-edge sensors (TESs) would be employed, so DIOS would also provide valuable lessons for the next ESA X-ray mission ATHENA on TES operation and cryogen-free cooling in space. We have been sophisticating the entire design of the satellite to meet the requirement for the Epsilon payload for the next call. The primary goal of the mission is to search for warm-hot intergalactic medium with high-resolution X-ray spectroscopy by detecting redshifted emission lines from OVII and OVIII ions. The results would have significant impacts on our understanding of the nature of "dark baryons," their total amount and spatial distribution, as well as their evolution over cosmological timescales.

  7. The cosmology large angular scale surveyor (CLASS): 40 GHz optical design

    Science.gov (United States)

    Eimer, Joseph R.; Bennett, Charles L.; Chuss, David T.; Marriage, Tobias; Wollack, Edward J.; Zeng, Lingzhen

    2012-09-01

    The Cosmology Large Angular Scale Surveyor (CLASS) instrument will measure the polarization of the cosmic microwave background at 40, 90, and 150 GHz from Cerro Toco in the Atacama desert of northern Chile. In this paper, we describe the optical design of the 40 GHz telescope system. The telescope is a diffraction limited catadioptric design consisting of a front-end Variable-delay Polarization Modulator (VPM), two ambient temperature mirrors, two cryogenic dielectric lenses, thermal blocking filters, and an array of 36 smooth-wall scalar feedhorn antennas. The feed horns guide the signal to antenna-coupled transition-edge sensor (TES) bolometers. Polarization diplexing and bandpass definition are handled on the same microchip as the TES. The feed horn beams are truncated with 10 dB edge taper by a 4 K Lyot-stop to limit detector loading from stray light and control the edge illumination of the front-end VPM. The field-of-view is 19° x 14° with a resolution for each beam on the sky of 1.5° FWHM.

  8. Hand Fractures

    Science.gov (United States)

    ... Z Videos Infographics Symptom Picker Anatomy Bones Joints Muscles Nerves Vessels Tendons About Hand Surgery What is a Hand Surgeon? What is ... serve as a framework. This framework supports the muscles that make the wrist ... When one of these hand bones is broken (fractured), it can prevent you ...

  9. Fracture source

    Directory of Open Access Journals (Sweden)

    2003-07-01

    Full Text Available The fracture properties of many different types of fibers are covered in a timely new book that will prove to be a tremendous source of information and references for researchers in the wide and diverse field of fibers and composites, says Bill Clegg.

  10. Rib Fractures

    Science.gov (United States)

    ... Commentary Recent News Scientists Working on Solar-Powered Prosthetic Limbs Exercise a Great Prescription to Help Older Hearts Bavencio Approved for Rare Skin Cancer Older Mothers May Raise Better-Behaved Kids, Study ... or a collapsed lung (pneumothorax—see Traumatic Pneumothorax ). An injury that fractures the lower ribs sometimes also damages the liver (see Liver ...

  11. [Thoracolumbar fractures].

    Science.gov (United States)

    Freslon, M; Bouaka, D; Coipeau, P; Defossez, G; Leclercq, N; Nebout, J; Marteau, E; Poilbout, N; Prebet, R

    2008-06-01

    Thoracolumbar fractures are frequent and the functional outcomes are sometimes severe. This multicentric study, including five medical centers, was performed to evaluate the long-term outcomes of the patients. One hundred and thirty six patients with thoracolumbar fracture (T11 to L2) was evaluated with a minimal follow-up of two years. Every one had a clinical exam with a score of Oswestry and an X-Ray study (before and after treatment and at revision). Most of them presented compression fractures, the most often at L1 level. On X-rays, a gain was noted on the vertebral kyphosis immediately after surgery, but there is a loss of correction over time whatever the treatment. The clinical outcomes for the patients were great, with an Oswestry average score of 6,4. A correlation was noted between this functional score and vertebral kyphosis. So, an anterior column strengthening (isolated or performed during the surgery) could improve these functional outcomes. Moreover, the Thoraco Lumbar Injury Severity Score (TLISS) seems to be a simple organigram to determine the most appropriate treatment of these fractures, with particular attention to the distraction mechanism or posterior ligamentous complex lesions. However, RMI before surgery is necessary to evaluate these lesions.

  12. Ultrasound attenuation as a quantitative measure of fracture healing

    Science.gov (United States)

    Gheduzzi, Sabina; Humphrey, Victor F.; Dodd, Simon P.; Cunningham, James L.; Miles, Anthony W.

    2004-10-01

    The monitoring of fracture healing still relies upon the judgment of callus formation and on the manual assessment of the stiffness of the fracture. A diagnostic tool capable of quantitatively measuring healing progression of a fracture would allow the fine-tuning of the treatment regime. Ultrasound attenuation measurements were adopted as a possible method of assessing the healing process in human long bones. The method involves exciting ultrasonic waves at 200 kHz in the bone and measuring the reradiation along the bone and across the fracture zone. Seven cadaveric femora were tested in vitro in intact form and after creating a transverse fracture by sawing through the cortex. The effects of five different fracture types were investigated. A partial fracture, corresponding to a 50% cut through the cortex, a closed fracture, and fractures of widths varying between 1, 2, and 4 mm were investigated. The introduction of a fracture was found to produce a dramatic effect on the amplitude of the signal. Ultrasound attenuation was found to be sensitive to the presence of a fracture, even when the fracture was well reduced. It would therefore appear feasible to adopt attenuation across a fracture as a quantitative measurement of fracture healing.

  13. Rapid imbibition of water in fractures within unsaturated sedimentary rock

    Science.gov (United States)

    Cheng, C.-L.; Perfect, E.; Donnelly, B.; Bilheux, H. Z.; Tremsin, A. S.; McKay, L. D.; DiStefano, V. H.; Cai, J. C.; Santodonato, L. J.

    2015-03-01

    The spontaneous imbibition of water and other liquids into gas-filled fractures in variably-saturated porous media is important in a variety of engineering and geological contexts. However, surprisingly few studies have investigated this phenomenon. We present a theoretical framework for predicting the 1-dimensional movement of water into air-filled fractures within a porous medium based on early-time capillary dynamics and spreading over the rough surfaces of fracture faces. The theory permits estimation of sorptivity values for the matrix and fracture zone, as well as a dispersion parameter which quantifies the extent of spreading of the wetting front. Quantitative data on spontaneous imbibition of water in unsaturated Berea sandstone cores were acquired to evaluate the proposed model. The cores with different permeability classes ranging from 50 to 500 mD and were fractured using the Brazilian method. Spontaneous imbibition in the fractured cores was measured by dynamic neutron radiography at the Neutron Imaging Prototype Facility (beam line CG-1D, HFIR), Oak Ridge National Laboratory. Water uptake into both the matrix and the fracture zone exhibited square-root-of-time behavior. The matrix sorptivities ranged from 2.9 to 4.6 mm s-0.5, and increased linearly as the permeability class increased. The sorptivities of the fracture zones ranged from 17.9 to 27.1 mm s-0.5, and increased linearly with increasing fracture aperture width. The dispersion coefficients ranged from 23.7 to 66.7 mm2 s-1 and increased linearly with increasing fracture aperture width and damage zone width. Both theory and observations indicate that fractures can significantly increase spontaneous imbibition in unsaturated sedimentary rock by capillary action and surface spreading on rough fracture faces. Fractures also increase the dispersion of the wetting front. Further research is needed to investigate this phenomenon in other natural and engineered porous media.

  14. Fictitious Crack Model of Concrete Fracture

    DEFF Research Database (Denmark)

    Brincker, Rune; Dahl, H.

    1989-01-01

    The substructure method introduced by Petersson is reformulated for the three-point bending specimen in order to obtain complete load-displacement relations without significant truncation. The problem of instability caused by the linearization of the softening in the fracture zone is discussed......, and an alternative energy formulation is given so that it is possible to distinguish between stable and unstable situations. The reformulated substructure method is implemented on computer to give a multilinear stress crack opening displacement relation for the material in the fracture zone, and some qualitative...

  15. Mirko Danijel Bogdanić (1760-1802, Astronomer, Mathematician, Surveyor and Croatian Educator

    Directory of Open Access Journals (Sweden)

    Tatjana Kren

    2010-12-01

    Full Text Available This article provides valuable information about the life and work of Mirko Danijel Bogdanić (Bogdanić Imre Dániel (Virovitica, 1762 – Buda, 1802 who was an astronomer, mathematician, surveyor and the author of a book on world history in Croatian. This article observes his life and work from the historical perspective of the time of Emperor Joseph II in Austria. From 1782 to 1785, Bogdanić studied mathematics, physics and astronomy in Buda and Pešt. He often worked with famous Croatian scientists such as Ivan Paskvić (János Pasquich, Franjo Bruna (Ferenc Bruna, Josip Mitterpacher (József Mitterpacher and others. Particular attention is paid to the period between approximately 1791 and 1796, which he spent in Vienna. At first, he focused on publishing the first volume of his history of the world in Croatian (Dogodjaji svieta (World events, 1792 in which he paid particular attention to astronomy and Croatian astronomical terminology. From 1793 to 1795, he studied astronomy at the University of Vienna. The following period was the most important in his life. He was second, then first assistant at the Buda Observatory (1796–1802 and also (1798–1802 appointed Imperial Assistant Astronomer to the cartographer János Lipszky, charged with conducting precise astronomical observations to determine the geographical coordinates for the geographical map of Hungary (Mappa Generalis Regni Hungariae. His observations, especially of latitudes, were considered excellent. He spent many long, hard hours working in the field under adverse weather conditions, leading to extreme exhaustion, which resulted in serious illness and his premature death.

  16. Global-scale external magnetic fields at Mars from Mars Global Surveyor data

    Science.gov (United States)

    Mittelholz, A.; Johnson, C. L.

    2015-12-01

    The martian magnetic field is unique among those of the terrestrial planets. It is the net result of the interaction of the solar wind and interplanetary magnetic field (IMF) with crustal remnant magnetization and a planetary ionosphere. Internal fields of crustal origin have been the subject of extensive studies; the focus of our work is identification and characterization of contributions from external magnetic fields using the Mars Global Surveyor (MGS) vector magnetic field data. We investigate the magnitude, average spatial structure and temporal variability of the external magnetic field at the MGS mapping altitude of 400 km by first subtracting expected contributions from crustal fields using existing global crustal field models. We identify contributions to the residual dayside fields from two sources: the draped IMF and a source that we interpret to be of ionospheric origin. As observed in previous work, nightside external fields are minimal at mapping orbit altitudes. The IMF contribution changes polarity every 13 days due to the geometry of the heliospheric magnetic field and Mars' orbit. This allows us to calculate the amplitude of the IMF at mapping orbit altitudes. The ionospheric contribution results in a quasi-steady dayside signal in the MGS observations because of the limited local time sampling of the MGS mapping orbit. The ionospheric contribution can be isolated by averaging the external fields over timescales longer than several Carrington rotations, to average out the IMF contribution. We present a global average of the ionopsheric field for the duration of the mapping orbit (2000-2006) and analyze daytime and nightime fields separately. We show that some structure in the time-averaged ionospheric field is organized in the Mars body-fixed frame, due for example, to the influence of crustal fields. We also show that the ionospheric fields vary in amplitude and geometry with martian season. Broader local time coverage over a restricted latitude

  17. Quantitative studies of volcanic processes on Mars using data from the Mars Global Surveyor

    Science.gov (United States)

    Bishop, Louise Jane

    Volcanic processes on Mars were investigated using topographic profiles derived with the help of IDL software from data collected by the Mars Orbiter Laser Altimeter (MOLA) on the Mars Global Surveyor Mission (MGS) in 1997-2001 and images obtained by the MGS Mars Orbiter Camera (MOC) and by the earlier Viking mission. Thickness and slope values for lava flows at both Elysium Mons and Alba Patera made it possible to compute flow emplacement times and effusion rates using the flow growth model proposed by C. R. J. Kilburn and R. M. C Lopes in 1990. Geological mapping of the Elysium volcanic region showed that Elysium Mons was emplaced as a result of a single shift in vent position on top of an older volcanic edifice, here termed the Ancient Volcanic Edifice (AVE). This implies that there have been substantial variations in both position and time for the magma supply. Calculations suggest that the flows at Alba Patera were emplaced more quickly than those at Elysium Mons, possibly owing to differences in fissure width and lava composition. There is evidence for both aa and pahoehoe on the summit areas of Elysium Mons and Alba Patera. The presence of aa is consistent with the view that long lava flows on Mars are emplaced quickly. Pahoehoe flows imply slow emplacement, and their inferred presence on Mars provides support for the theory that long terrestrial lavas are often emplaced as sheets of inflated pahoehoe. MOC image analysis indicated that late-stage explosive activity has occurred at several Martian volcanoes where it was previously undetected, contrary to the prevalent view that Martian volcanism evolves from explosive to effusive activity. To resolve the many ambiguities inherent in morphological data and imagery the need remains for ground truthing by experienced observers and detailed geochemical analyses in situ or by means of a sample return mission

  18. The Cosmology Large Angular Scale Surveyor (CLASS): In search of the energy scale of inflation

    Science.gov (United States)

    Eimer, Joseph R.

    The hypothesis that the early universe underwent a period of accelerating expansion, called inflation, has become an essential mechanism for explaining the flatness and homogeneity of the universe and explaining the fluctuations found in the cosmic microwave background (CMB). Inflation predicts the existence of primordial gravitational waves that would have produced a unique polarization pattern on the CMB. Measurement of the amplitude of these gravitational waves can be used to infer the energy scale of the potential driving the expansion. Detection of this signal would be a dramatic confirmation of the inflation paradigm and significantly tighten constraints on inflationary models. The Cosmology Large Angular Scale Surveyor (CLASS) is a new ground-based instrument designed to search for the inflationary B-mode signal from the Atacama Desert in northern Chile (elevation ~ 5200 m). The CLASS instrument will observe over 60% of the sky to target the large scale polarization signal (> 10 deg), and consist of four separate telescopes: one observing at 40 GHz, two observing at 90 GHz and one observing at 150 GHz. The detectors for each band will be background limited antenna-coupled transition edge sensor bolometers. A variable-delay polarization modulator (VPM) will be placed as the first optical element in each of the telescopes. The front-end polarization modulator will mitigate many systematic effects and provide a powerful means of distinguishing the instrument response from the input signal. This dissertation contains an overview of the CLASS instrument. Specific emphasis is placed on the connection between the science goals and the instrument architecture. A description of the optical design of the 40 GHz telescope is given, and the application of the VPM technology to the CLASS instrument is described. We end with an overview of the detectors.

  19. Fatigue fracture of high-strength Al-Zn-Mg-Cu alloy

    Institute of Scientific and Technical Information of China (English)

    JIAN Hai-gen; JIANG Feng; WEN Kang; JIANG Long; HUANG Hong-feng; WEI Li-li

    2009-01-01

    X-ray diffractometry(XRD), optical microscopy(OM), scanning electron microscopy(SEM) were used to study the fatigue fracture of the T7451 Al-Zn-Mg-Cu alloy (470 ℃, 60 min+115 ℃, 8 h+165 ℃, 16 h). The study reveals mainly the microscopic structure of the alloy in the process of crack formation and crack growth. The fatigue fracture is characterized by three zones: fatigue crack source zone, fatigue crack propagation zone and fatigue fracture zone. The fatigue damage preferably incubates at the fractured inclusion particles at or near (about 25 μm) the specimen free surfaces, and these brittle Fe-rich intermetallic inclusion particles are (7-10) μm×(11-14) μm in size. Some features such as "feather-like", "river and range" and boundary extrusions can be observed in the fatigue propagation zone, and in the fatigue fracture zone the surface is rough and uneven.

  20. Study on Control Technology for Fractured Karst Zone Containing High-concentration H2 S and High-pressure Karst Water in Longtan Coal Mine%龙滩煤矿高浓度H2S气体高压岩溶破碎区治理技术

    Institute of Scientific and Technical Information of China (English)

    庞成

    2015-01-01

    The fractured karst zone containing high-pressure water and high-concentrated H2 S was exposed in the drivage process of the main adit in Longtan Coal Mine, which seriously affected the construction progress and threatened the safety of the mine workers. To aim at the characteristics of solid-liquid-gas phase flow, a comprehensive control technology consisted of pressurized drilling, safe support of the fractured zone, controllable drainage of high-pressure water and the prevention and control of H2 S was proposed and applied at the site, the structured karst zone was successfully passed through, which not only ensured the safe drivage of the main adit, but also produced significant economic benefit.%龙滩煤矿主平硐在掘进过程中揭露了含有高压水和高浓度H2 S气体的岩溶破碎带,严重影响掘进施工进度和威胁作业人员的安全. 针对岩溶破碎区的固—液—气三相流特征,提出了由带压钻井、破碎区安全支护、高压水可控排放和H2 S气体防治组成的综合防治技术,并在现场实施,成功通过了岩溶破碎区,不仅保证了主平硐的安全掘进,还产生了明显的经济效益.

  1. Laboratory testing on infiltration in single synthetic fractures

    Science.gov (United States)

    Cherubini, Claudia; Pastore, Nicola; Li, Jiawei; Giasi, Concetta I.; Li, Ling

    2017-04-01

    An understanding of infiltration phenomena in unsaturated rock fractures is extremely important in many branches of engineering for numerous reasons. Sectors such as the oil, gas and water industries are regularly interacting with water seepage through rock fractures, yet the understanding of the mechanics and behaviour associated with this sort of flow is still incomplete. An apparatus has been set up to test infiltration in single synthetic fractures in both dry and wet conditions. To simulate the two fracture planes, concrete fractures have been moulded from 3D printed fractures with varying geometrical configurations, in order to analyse the influence of aperture and roughness on infiltration. Water flows through the single fractures by means of a hydraulic system composed by an upstream and a downstream reservoir, the latter being subdivided into five equal sections in order to measure the flow rate in each part to detect zones of preferential flow. The fractures have been set at various angles of inclination to investigate the effect of this parameter on infiltration dynamics. The results obtained identified that altering certain fracture parameters and conditions produces relevant effects on the infiltration process through the fractures. The main variables influencing the formation of preferential flow are: the inclination angle of the fracture, the saturation level of the fracture and the mismatch wavelength of the fracture.

  2. FRACTURE LIMIT LOAD OF CONE SHAPE PART IN DRAWING PROCESS

    Institute of Scientific and Technical Information of China (English)

    Xu Jisheng; Gao Shiyou

    2005-01-01

    The deformation characters and load status of the blank's potential fracture zone are analyzed at the moment when blank is approaching to punch corner in drawing process of cone shape part. Based on tension instability theory, the formula for calculating fracture limit load of cone shape part in drawing process is derived. Also, the formula is analyzed and verified by experiment.

  3. 腓总神经安全区定位在MIPPO治疗胫骨近端骨折中的价值%Identification of peroneal nerve’ s safety zone and its clinical value in treatment of MIPPO for proximal tibia fracture

    Institute of Scientific and Technical Information of China (English)

    刘融; 张勇; 张国华; 陈令斌

    2015-01-01

    Objective To define the peroneal nerve’ s safety zone and study its clinical value in treatment of MIPPO for proximal tibia fracture. Methods The peroneal nerve’ s safety zone was defined according to dead body anatomy. Patients with proximal tibia fracture were divided into traditional therapy group ( control group) and peroneal nerve’ s safety zone therapy ( observation group) . The curative effects and complications were compared. Results The peroneal nerve’s safety zone of R1 was (45. 30 ± 1. 55) mm,R2 was (45. 61 ± 1. 40) mm,R3 was(45. 42 ± 1. 62) mm,angle A was(33 ± 2. 1)°,angle B was(97 ± 2. 3)°. The operating time,bleeding volume,hospitalization time and fracture time in observation group were significantly lower than those in the control group,but there was no siginificant difference in post-ther-apy infection,delayed healing and other complications. Conclusion The curative effects according to peroneal nerve’ s safety zone are better than traditional MIPPO in proximal tibia fracture.%目的:探讨腓总神经安全区定位在微创经皮钢板内固定( MIPPO)治疗胫骨近端骨折中的价值。方法解剖并测量国人尸体腓总神经安全区数据;将2013年1月至2014年1月60例胫骨近端骨折患者分为MIPPO常规经验治疗组(对照组)和基于腓总神经安全区的MIPPO治疗组(观察组),各30例,比较2组患者疗效及并发症的发生情况。结果腓总神经安全区R1为(45.30±1.55) mm,R2为(45.61±1.40) mm,R3为(45.42±1.62) mm,角A为(33±2.1)°,角B为(97±2.3)°。观察组患者手术时间、术中出血量、住院时间和骨折愈合时间显著低于对照组(P0.05)。结论 MIPPO技术在腓总神经安全区内操作安全可靠,治疗胫骨近端骨折疗效显著高于传统的基于经验型MIPPO技术,可显著降低腓总神经损伤发生率。

  4. Fluid driven fracture mechanics in highly anisotropic shale: a laboratory study with application to hydraulic fracturing

    Science.gov (United States)

    Gehne, Stephan; Benson, Philip; Koor, Nick; Enfield, Mark

    2017-04-01

    The finding of considerable volumes of hydrocarbon resources within tight sedimentary rock formations in the UK led to focused attention on the fundamental fracture properties of low permeability rock types and hydraulic fracturing. Despite much research in these fields, there remains a scarcity of available experimental data concerning the fracture mechanics of fluid driven fracturing and the fracture properties of anisotropic, low permeability rock types. In this study, hydraulic fracturing is simulated in a controlled laboratory environment to track fracture nucleation (location) and propagation (velocity) in space and time and assess how environmental factors and rock properties influence the fracture process and the developing fracture network. Here we report data on employing fluid overpressure to generate a permeable network of micro tensile fractures in a highly anisotropic shale ( 50% P-wave velocity anisotropy). Experiments are carried out in a triaxial deformation apparatus using cylindrical samples. The bedding planes are orientated either parallel or normal to the major principal stress direction (σ1). A newly developed technique, using a steel guide arrangement to direct pressurised fluid into a sealed section of an axially drilled conduit, allows the pore fluid to contact the rock directly and to initiate tensile fractures from the pre-defined zone inside the sample. Acoustic Emission location is used to record and map the nucleation and development of the micro-fracture network. Indirect tensile strength measurements at atmospheric pressure show a high tensile strength anisotropy ( 60%) of the shale. Depending on the relative bedding orientation within the stress field, we find that fluid induced fractures in the sample propagate in two of the three principal fracture orientations: Divider and Short-Transverse. The fracture progresses parallel to the bedding plane (Short-Transverse orientation) if the bedding plane is aligned (parallel) with the

  5. Preferential Flow in Fractured Welded Tuffs

    Energy Technology Data Exchange (ETDEWEB)

    Salve, Rohit

    2004-08-15

    To better understand preferential flow in fractured rock, we carried out an in situ field experiment in the Exploratory Studies Facility at Yucca Mountain, Nevada. This experiment involved the release of {approx} 22 m3 of ponded water (at a pressure head of {approx} 0.04 m) over a period of 7 months, directly onto a 12 m2 infiltration plot located on a fractured welded tuff surface. As water was released, changes in moisture content were monitored along horizontal boreholes located in the formation {approx} 19-22 m below. Distinct flow zones, varying in flow velocity, wetted cross-sectional area, and extent of lateral movement, intercepted the monitoring boreholes. There was also evidence of water being diverted above the ceiling of a cavity in the immediate vicinity of the monitoring boreholes. Observations from this field experiment suggest that isolated conduits, each encompassing a large number of fractures, develop within the fractured rock formation to form preferential flow paths that persist if there is a continuous supply of water. In addition, in fractured welded tuffs the propensity for fracture-matrix interactions is significantly greater than that suggested by existing conceptual models,in which flow occurs along a section of fracture surfaces. An overriding conclusion is that field investigations at spatial scales of tens of meters provide data critical to the fundamental understanding of flow in fractured rock.

  6. Growth Plate Fractures

    Science.gov (United States)

    ... the most widely used by doctors is the Salter-Harris system, described below. Type I Fractures These ... incidence of growth plate fractures peaks in adolescence. Salter-Harris classification of growth plate fractures. AAOS does ...

  7. The Strategy for the Second Phase of Aerobraking Mars Global Surveyor

    Science.gov (United States)

    Johnston, M. D.; Esposito, P. B.; Alwar, V.; Demcak, S. W.; Graat, E. J.; Burkhart, P. D.; Portock, B. M.

    2000-01-01

    On February 19, 1999, the Mars Global Surveyor (MGS) spacecraft was able to propulsively establish its mapping orbit. This event followed the completion of the second phase of aerobraking for the MGS spacecraft on February 4, 1999. For the first time, a spacecraft at Mars had successfully employed aerobraking methods in order to reach its desired pre-launch mapping orbit. This was accomplished despite a damaged spacecraft solar array. The MGS spacecraft was launched on November 7, 1996, and after a ten month interplanetary transit was inserted into a highly elliptical capture orbit at Mars on September 12, 1997. Unlike other interplanetary missions, the MGS spacecraft was launched with a planned mission delta-V ((Delta)V) deficit of nearly 1250 m/s. To overcome this AV deficit, aerobraking techniques were employed. However, damage discovered to one of the spacecraft's two solar arrays after launch forced major revisions to the original aerobraking planning of the MGS mission. In order to avoid a complete structural failure of the array, peak dynamic pressure levels for the spacecraft were established at a major spacecraft health review in November 1997. These peak dynamic pressure levels were roughly one-third of the original mission design values. Incorporating the new dynamic pressure limitations into mission replanning efforts resulted in an 'extended' orbit insertion phase for the mission. This 'extended' orbit insertion phase was characterized by two distinct periods of aerobraking separated by an aerobraking hiatus that would last for several months in an intermediate orbit called the "Science Phasing Orbit" (SPO). This paper describes and focuses on the strategy for the second phase of aerobraking for the MGS mission called "Aerobraking Phase 2." This description will include the baseline aerobraking flight profile, the trajectory control methodology, as well as the key trajectory metrics that were monitored in order to successfully "guide' the spacecraft to

  8. HUBBLE WATCHES THE RED PLANET AS MARS GLOBAL SURVEYOR BEGINS AEROBRAKING

    Science.gov (United States)

    2002-01-01

    his NASA Hubble Space Telescope picture of Mars was taken on Sept. 12, one day after the arrival of the Mars Global Surveyor (MGS) spacecraft and only five hours before the beginning of autumn in the Martian northern hemisphere. (Mars is tilted on its axis like Earth, so it has similar seasonal changes, including an autumnal equinox when the Sun crosses Mars' equator from the northern to the southern hemisphere). This Hubble picture was taken in support of the MGS mission. Hubble is monitoring the Martian weather conditions during the early phases of MGS aerobraking; in particular, the detection of large dust storms are important inputs into the atmospheric models used by the MGS mission to plan aerobraking operations. Though a dusty haze fills the giant Hellas impact basin south of the dark fin-shaped feature Syrtis Major, the dust appears to be localized within Hellas. Unless the region covered expands significantly, the dust will not be of concern for MGS aerobraking. Other early signs of seasonal transitions on Mars are apparent in the Hubble picture. The northern polar ice cap is blanketed under a polar hood of clouds that typically start forming in late northern summer. As fall progresses, sunlight will dwindle in the north polar region and the seasonal polar cap of frozen carbon dioxide will start condensing onto the surface under these clouds. Hubble observations will continue until October 13, as MGS carefully uses the drag of the Martian atmosphere to circularize its orbit about the Red Planet. After mid-October, Mars will be too close to the Sun, in angular separation, for Hubble to safely view. The image is a composite of three separately filtered colored images taken with the Wide Field Planetary Camera 2 (WFPC2). Resolution is 35 miles (57 kilometers) per pixel (picture element). The Pathfinder landing site near Ares Valles is about 2200 miles (3600 kilometers) west of the center of this image, so was not visible during this observation. Mars was 158

  9. The Mars Global Surveyor Ka-Band Link Experiment (MGS/KaBLE-II)

    Science.gov (United States)

    Morabito, D.; Butman, S.; Shambayati, S.

    1999-01-01

    The Mars Global Surveyor (MGS) spacecraft, launched on November 7, 1996, carries an experimental space-to-ground telecommunications link at Ka-band (32 GHz) along with the primary X-band (8.4-GHz) downlink. The signals are simultaneously transmitted from a 1.5-m-diameter parabolic antenna on MGS and received by a beam-waveguide (BWG) research and development (R&D) 34-meter a ntenna located in NASA's Goldstone Deep Space Network (DSN) complex near Barstow, California. This Ka-band link experiment (KaBLE-II) allows the performances of the Ka-band and X-band signals to be compared under nearly identical conditions. The two signals have been regularly tracked during the past 2 years. This article presents carrier-signal-level data (P_c/N_o) for both X-band and Ka-band acquired over a wide range of station elevation angles, weather conditions, and solar elongation angles. The cruise phase of the mission covered the period from launch (November 7, 1996) to Mars orbit capture (September 12, 1997). Since September 12, 1997, MGS has been in orbit around Mars. The measurements confirm that Ka-band could increase data capacity by at least a factor of three (5 dB) as compared with X-band. During May 1998, the solar corona experiment, in which the effects of solar plasma on the X-band and Ka-band links were studied, was conducted. In addition, frequency and difference frequency (f_x - f_(Ka)/3.8), ranging, and telemetry data results are presented. MGS/KaBLE-II measured signal strengths (for 54 percent of the experiments conducted) that were in reasonable agreement with predicted values based on preflight knowledge, and frequency residuals that agreed between bands and whose statistics were consistent with expected noise sources. For passes in which measured signal strengths disagreed with predicted values, the problems were traced to known deficiencies, for example, equipment operating under certain conditions, such as a cold Ka-band solid-state power amplifier (SSPA

  10. A reservoir simulation approach for modeling of naturally fractured reservoirs

    Directory of Open Access Journals (Sweden)

    H. Mohammadi

    2012-12-01

    Full Text Available In this investigation, the Warren and Root model proposed for the simulation of naturally fractured reservoir was improved. A reservoir simulation approach was used to develop a 2D model of a synthetic oil reservoir. Main rock properties of each gridblock were defined for two different types of gridblocks called matrix and fracture gridblocks. These two gridblocks were different in porosity and permeability values which were higher for fracture gridblocks compared to the matrix gridblocks. This model was solved using the implicit finite difference method. Results showed an improvement in the Warren and Root model especially in region 2 of the semilog plot of pressure drop versus time, which indicated a linear transition zone with no inflection point as predicted by other investigators. Effects of fracture spacing, fracture permeability, fracture porosity, matrix permeability and matrix porosity on the behavior of a typical naturally fractured reservoir were also presented.

  11. Chopart fractures.

    Science.gov (United States)

    Klaue, Kaj

    2004-09-01

    The Chopart articular space was described by François Chopart (1743-1795) as a practical space for amputations in cases of distal foot necrosis. It corresponds to the limit between the anatomical hind-foot and the mid-foot. The bones involved are the talus and the calcaneus proximally, and the navicular and the cuboid distally. This space thus holds two functionally distinct entities, the anterior part of the coxa pedis (an essential functional joint) and the calcaneo-cuboidal joint,which can be considered to be an "adaptive joint" within a normal foot. Trauma to this region may cause fractures and/or dislocations and, in high energy trauma,compartment syndromes. Principles of treatment are immediate reduction of dislocations and realignment of the medial and lateral column of the foot in length and orientation. Open reduction and internal fixation of talus and navicular fractures are often indicated to restore the "coxa pedis". Open reconstruction or fusion in correct length of the calcaneo-cuboidal joint is occasionally indicated. Salvage procedures in malunions include navicular osteotomies and calcaneo-cuboidal bone block fusions. Treatment of joint destructions, especially involving the talo-navicular joint, include triple arthrodesis.

  12. Fatigue zones in metals identified by polarized light photography

    Science.gov (United States)

    Walsh, F. D.

    1967-01-01

    Polarized light technique clearly defines the fatigue zones in metal for measuring and photographing. White light is passed through a vertical polarizing filter and then is reflected onto the surface of the fracture specimen.

  13. Fractures of the distal radius (Colles' fracture)

    National Research Council Canada - National Science Library

    João Carlos Belloti; João Baptista Gomes dos Santos; Álvaro Nagib Atallah; Walter Manna Albertoni; Flavio Faloppa

    2007-01-01

    CONTEXT AND OBJECTIVE: Although Colles' fracture is a common clinical situation for the orthopedist, we did not find any information in the literature that would allow safe decision-making on the best treatment for each fracture type...

  14. Characterization of reservoir fractures using conventional geophysical logging

    Directory of Open Access Journals (Sweden)

    Paitoon Laongsakul

    2011-04-01

    Full Text Available In hydrocarbon exploration fractures play an important role as possible pathways for the hydrocarbon flow and bythis enhancing the overall formation’s permeability. Advanced logging methods for fracture analysis, like the boreholeacoustic televiewer and Formation Microscanner (FMS are available, but these are additional and expensive tools. However,open and with water or hydrocarbon filled fractures are also sensitive to electrical and other conventional logging methods.For this study conventional logging data (electric, seismic, etc were available plus additional fracture information from FMS.Taking into account the borehole environment the results show that the micro-spherically focused log indicates fractures byshowing low resistivity spikes opposite open fractures, and high resistivity spikes opposite sealed ones. Compressional andshear wave velocities are reduced when passing trough the fracture zone, which are assumed to be more or less perpendicularto borehole axis. The photoelectric absorption curve exhibit a very sharp peak in front of a fracture filled with bariteloaded mud cake. The density log shows low density spikes that are not seen by the neutron log, usually where fractures,large vugs, or caverns exist. Borehole breakouts can cause a similar effect on the logging response than fractures, but fracturesare often present when this occurs. The fracture index calculation by using threshold and input weight was calculatedand there was in general a good agreement with the fracture data from FMS especially in fracture zones, which mainlycontribute to the hydraulic system of the reservoir. Finally, the overall results from this study using one well are promising,however further research in the combination of different tools for fracture identification is recommended as well as the useof core for further validation.

  15. 向家坝水电站挠曲核部破碎带水泥-环氧树脂复合灌浆试验研究%Cement-epoxy Resin Grouting Treatment for the Flexural Fracture Zone in Xiangjiaba Hydropower Station

    Institute of Scientific and Technical Information of China (English)

    魏涛; 张健; 陈亮; 肖承京

    2015-01-01

    向家坝水电站坝址岩性岩相多变,地质条件非常复杂,坝右岸存在挠曲核部破碎带,对大坝的渗透稳定非常不利。现场施工发现水泥灌浆难以对坝基存在的挠曲核部破碎带进行有效处理,为解决挠曲核部破碎带地质缺陷,长江科学院在右岸二期基坑高程257 m 平台进行了水泥-环氧树脂复合灌浆试验。灌后检查显示:透水率由复合灌浆前的平均透水率3.05 Lu降为0.075 Lu,做全压力为2.265 MPa的疲劳压水试验,经72 h 透水率为0 Lu;水力破坏坡降比灌前提高了11.54倍;灌浆后平均波速比灌前提高16.8%。试验结果表明:湿磨细水泥-环氧树脂同孔复合灌浆的工艺是可行的,CW510环氧树脂灌浆材料能够浸润和渗透到挠曲核部破碎带不良地质体中,试验中所获得的工艺参数可以在向家坝水电站挠曲核部破碎处理中推广应用,并可为其他水工建筑物基础处理借鉴。%The geological conditions of Xiangjiaba hydropower station is very complicated with a flexural core frac-ture zone at the right side of dam foundation,detrimental to the seepage stability of the dam.It’s hard to mend these geological defects such as siltstone and argillaceous siltstone with cement grouting .In view of this we conduc-ted test on platform at elevation 257m on the right bank of second-stage foundation pit using cement-epoxy resin grouting to mend the geological defects.The quality inspection results after grouting are as follows:water permea-bility reduced from 3.05 Lu to 0.075 Lu;the water permeability of fatigue water pressure test with full pressure of 2.265 MPa is 0 Lu after 72h;the gradient of hydraulic damage is 11.54 times higher than that before grouting;the average wave velocity improved by 16.8% over the previous grouting.The test results indicate that the treatment of cement-epoxy resin compound grouting for flexural core fracture zone in Xiangjiaba

  16. Multi-scale approach to invasion percolation of rock fracture networks

    CERN Document Server

    Ebrahimi, Ali N; Araújo, Nuno A M; Herrmann, Hans J

    2014-01-01

    A multi-scale scheme for the invasion percolation of rock fracture networks with heterogeneous fracture aperture fields is proposed. Inside fractures, fluid transport is calculated on the finest scale and found to be localized in channels as a consequence of the aperture field. The channel network is characterized and reduced to a vectorized artificial channel network (ACN). Different realizations of ACNs are used to systematically calculate efficient apertures for fluid transport inside differently sized fractures as well as fracture intersection and entry properties. Typical situations in fracture networks are parameterized by fracture inclination, flow path length along the fracture and intersection lengths in the entrance and outlet zones of fractures. Using these scaling relations obtained from the finer scales, we simulate the invasion process of immiscible fluids into saturated discrete fracture networks, which were studied in previous works.

  17. Improvement of job satisfaction and organisational commitment through work group identification: an examination of the quantity surveyors in Hong Kong

    Directory of Open Access Journals (Sweden)

    Wai Yee Betty Chiu

    2013-09-01

    Full Text Available Though extant literatures in other sectors indicatethat job satisfaction and organizational commitment are important fordetermining individual and organisational outcomes, limited related researchhas been conducted amongst quantity surveyors in Hong Kong. Given cooperativeworking arrangement in the quantity surveying profession, work groupidentification is regarded as an important antecedent for determining jobsatisfaction and organisational commitment. The aim of this study is to examinewhether work group identification improves job satisfaction and organisationalcommitment. A questionnaire survey is conducted to collect data from quantitysurveyors working in private sector. A total of 71 valid responses are obtainedfrom 509 contacted quantity surveyors in Hong Kong. Bivariate correlation andmultiple regression analyses are performed to find the significance ofrelationships among the variables. Data analysis results support mosthypotheses. Work group identification is found to have significant positiveeffect on job satisfaction, affective and normative commitment. The finding isa bold step for quantity surveying companies to improve their quantity surveyors’job satisfaction and commitment level. The role of other contextual and organisationalfactors on job satisfaction and organisational commitment needs to becomplemented for future research.

  18. A simple, high sensitivity mutation screening using Ampligase mediated T7 endonuclease I and Surveyor nuclease with microfluidic capillary electrophoresis.

    Science.gov (United States)

    Huang, Mo Chao; Cheong, Wai Chye; Lim, Li Shi; Li, Mo-Huang

    2012-03-01

    Mutation and polymorphism detection is of increasing importance for a variety of medical applications, including identification of cancer biomarkers and genotyping for inherited genetic disorders. Among various mutation-screening technologies, enzyme mismatch cleavage (EMC) represents a great potential as an ideal scanning method for its simplicity and high efficiency, where the heteroduplex DNAs are recognized and cleaved into DNA fragments by mismatch-recognizing nucleases. Thereby, the enzymatic cleavage activities of the resolving nucleases play a critical role for the EMC sensitivity. In this study, we utilized the unique features of microfluidic capillary electrophoresis and de novo gene synthesis to explore the enzymatic properties of T7 endonuclease I and Surveyor nuclease for EMC. Homoduplex and HE DNAs with specific mismatches at desired positions were synthesized using PCR (polymerase chain reaction) gene synthesis. The effects of nonspecific cleavage, preference of mismatches, exonuclease activity, incubation time, and DNA loading capability were systematically examined. In addition, the utilization of a thermostable DNA ligase for real-time ligase mediation was investigated. Analysis of the experimental results has led to new insights into the enzymatic cleavage activities of T7 endonuclease I and Surveyor nuclease, and aided in optimizing EMC conditions, which enhance the sensitivity and efficiency in screening of unknown DNA variations.

  19. Mode I fracture of sheet metal

    Science.gov (United States)

    Pardoen, T.; Hachez, F.; Marchioni, B.; Blyth, P. H.; Atkins, A. G.

    2004-02-01

    The perceived wisdom about thin sheet fracture is that (i) the crack propagates under mixed mode I & III giving rise to a slant through-thickness fracture profile and (ii) the fracture toughness remains constant at low thickness and eventually decreases with increasing thickness. In the present study, fracture tests performed on thin DENT plates of various thicknesses made of stainless steel, mild steel, 6082-O and NS4 aluminium alloys, brass, bronze, lead, and zinc systematically exhibit (i) mode I "bath-tub", i.e. "cup & cup", fracture profiles with limited shear lips and significant localized necking (more than 50% thickness reduction), (ii) a fracture toughness that linearly increases with increasing thickness (in the range of 0.5- 5 mm). The different contributions to the work expended during fracture of these materials are separated based on dimensional considerations. The paper emphasises the two parts of the work spent in the fracture process zone: the necking work and the "fracture" work. Experiments show that, as expected, the work of necking per unit area linearly increases with thickness. For a typical thickness of 1 mm, both fracture and necking contributions have the same order of magnitude in most of the metals investigated. A model is developed in order to independently evaluate the work of necking, which successfully predicts the experimental values. Furthermore, it enables the fracture energy to be derived from tests performed with only one specimen thickness. In a second modelling step, the work of fracture is computed using an enhanced void growth model valid in the quasi plane stress regime. The fracture energy varies linearly with the yield stress and void spacing and is a strong function of the hardening exponent and initial void volume fraction. The coupling of the two models allows the relative contributions of necking versus fracture to be quantified with respect to (i) the two length scales involved in this problem, i.e. the void spacing

  20. Fracture-correlated lineaments at Great Bay, southeastern New Hampshire

    Science.gov (United States)

    Degnan, James R.; Clark, Stewart F.

    2002-01-01

    Analysis by remote-sensing techniques and observations of exposed bedrock structure were preliminary steps taken in a study to locate potential bedrock-fracture zones that may store and transmit ground water near Great Bay, N.H. To help correlate lineaments on the surface with fractures, structural measurements were made at exposed bedrock, largely along the shoreline of the bay, and analyzed to identify fracture trends and fracture characteristics. With these fracture data, lineament-filtering techniques, such as (1) buffer analysis around individual lineaments, (2) discrete-measurement analysis by domain, and (3) spacing-normalized analysis by domain, identified 'fracture-correlated lineaments.' Of the 927 lineaments identified in the study area (180 square kilometers), 406 (44 percent) were evaluated because they either were located within 305 meters of an outcrop with fracture data or intersected one of five 3,300-meter-square grid domain cells that encompassed the fracture data. Of the 406 lineaments, 190 (47 percent) are fracture correlated, although only 15 percent were correlated by more than one filtering technique. The large number of lineaments found in areas of thin glacial overburden and high densities of fractured outcrops suggests that filtering techniques are useful in these areas to selectively identify fracture-correlated lineaments. Fractures parallel to bedding in the Kittery Formation are open locally and often associated with vugs, with up to 1-centimeter aperture, and may provide appreciable secondary porosity in this rock unit. Discrete-measurement analysis by domain identified fracture-correlated lineaments with orientations parallel to these open and vug-filled fractures. Fracture-correlated lineaments related to closely spaced fractures were identified by the spacing-normalized analysis by domain. Analysis results may be used to indicate the potential bedrock pathways for ground-water-discharge points along the shoreline of Great Bay.

  1. Challenges in Continuum Modelling of Intergranular Fracture

    DEFF Research Database (Denmark)

    Coffman, Valerie; Sethna, James P.; Ingraffea, A. R.;

    2011-01-01

    Intergranular fracture in polycrystals is often simulated by finite elements coupled to a cohesive zone model for the interfaces, requiring cohesive laws for grain boundaries as a function of their geometry. We discuss three challenges in understanding intergranular fracture in polycrystals. First......, 3D grain boundary geometries comprise a five-dimensional space. Second, the energy and peak stress of grain boundaries have singularities for all commensurate grain boundaries, especially those with short repeat distances. Thirdly, fracture nucleation and growth depend not only upon the properties...... properties. To address the last challenge, we demonstrate a method for atomistically extracting the fracture properties of geometrically complex local regions on the fly from within a finite element simulation....

  2. Self-potential observations during hydraulic fracturing

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Jeffrey R.; Glaser, Steven D.

    2007-09-13

    The self-potential (SP) response during hydraulic fracturing of intact Sierra granite was investigated in the laboratory. Excellent correlation of pressure drop and SP suggests that the SP response is created primarily by electrokinetic coupling. For low pressures, the variation of SP with pressure drop is linear, indicating a constant coupling coefficient (Cc) of -200 mV/MPa. However for pressure drops >2 MPa, the magnitude of the Cc increases by 80% in an exponential trend. This increasing Cc is related to increasing permeability at high pore pressures caused by dilatancy of micro-cracks, and is explained by a decrease in the hydraulic tortuosity. Resistivity measurements reveal a decrease of 2% prior to hydraulic fracturing and a decrease of {approx}35% after fracturing. An asymmetric spatial SP response created by injectate diffusion into dilatant zones is observed prior to hydraulic fracturing, and in most cases this SP variation revealed the impending crack geometry seconds before failure. At rupture, injectate rushes into the new fracture area where the zeta potential is different than in the rock porosity, and an anomalous SP spike is observed. After fracturing, the spatial SP distribution reveals the direction of fracture propagation. Finally, during tensile cracking in a point load device with no water flow, a SP spike is observed that is caused by contact electrification. However, the time constant of this event is much less than that for transients observed during hydraulic fracturing, suggesting that SP created solely from material fracture does not contribute to the SP response during hydraulic fracturing.

  3. Fracture Mechanics of an Elastic Softening Material like Concrete

    NARCIS (Netherlands)

    Reinhardt, H.W.

    1984-01-01

    Concrete is modelled as a linear elastic softening material and introduced into fracture mechanics. A discrete crack is considered with softening zones at the crack tips. Following the approach of Dugdale/Barenblatt, closing stresses are applied to the crack faces in the softening zone. The stresses

  4. In-situ fracture mapping using geotomography and brine tracers

    Energy Technology Data Exchange (ETDEWEB)

    Deadrick, F.J.; Ramirez, A.L.; Lytle, R.J.

    1981-01-01

    The Lawrence Livermore National Laboratory is currently assessing the capabilities of high resolution geophysical methods to characterize geologic sites for the disposal of high level nuclear waste. A successful experiment has recently been performed in which salt water tracers and high frequency electromagnetic waves were utilized to map rock mass fracture zones in-situ. Multiple cross-borehole EM transmissions were used to generate a tomographic image of the fractured rock region between two boreholes. The tomographs obtained correlate well with conventional wireline geophysical logs which can be used to infer the location of fractured zones in the rock mass. This indirect data suggests that the geotomography and brine tracer technique may have merit in mapping fractured zones between boreholes.

  5. Effect of Natural Fractures on Hydraulic Fracturing

    Science.gov (United States)

    Ben, Y.; Wang, Y.; Shi, G.

    2012-12-01

    Hydraulic Fracturing has been used successfully in the oil and gas industry to enhance oil and gas production in the past few decades. Recent years have seen the great development of tight gas, coal bed methane and shale gas. Natural fractures are believed to play an important role in the hydraulic fracturing of such formations. Whether natural fractures can benefit the fracture propagation and enhance final production needs to be studied. Various methods have been used to study the effect of natural fractures on hydraulic fracturing. Discontinuous Deformation Analysis (DDA) is a numerical method which belongs to the family of discrete element methods. In this paper, DDA is coupled with a fluid pipe network model to simulate the pressure response in the formation during hydraulic fracturing. The focus is to study the effect of natural fractures on hydraulic fracturing. In particular, the effect of rock joint properties, joint orientations and rock properties on fracture initiation and propagation will be analyzed. The result shows that DDA is a promising tool to study such complex behavior of rocks. Finally, the advantages of disadvantages of our current model and future research directions will be discussed.

  6. Fracture channel waves

    Science.gov (United States)

    Nihei, Kurt T.; Yi, Weidong; Myer, Larry R.; Cook, Neville G. W.; Schoenberg, Michael

    1999-03-01

    The properties of guided waves which propagate between two parallel fractures are examined. Plane wave analysis is used to obtain a dispersion equation for the velocities of fracture channel waves. Analysis of this equation demonstrates that parallel fractures form an elastic waveguide that supports two symmetric and two antisymmetric dispersive Rayleigh channel waves, each with particle motions and velocities that are sensitive to the normal and tangential stiffnesses of the fractures. These fracture channel waves degenerate to shear waves when the fracture stiffnesses are large, to Rayleigh waves and Rayleigh-Lamb plate waves when the fracture stiffnesses are low, and to fracture interface waves when the fractures are either very closely spaced or widely separated. For intermediate fracture stiffnesses typical of fractured rock masses, fracture channel waves are dispersive and exhibit moderate to strong localization of guided wave energy between the fractures. The existence of these waves is examined using laboratory acoustic measurements on a fractured marble plate. This experiment confirms the distinct particle motion of the fundamental antisymmetric fracture channel wave (A0 mode) and demonstrates the ease with which a fracture channel wave can be generated and detected.

  7. Traumatic thoracolumbar spine fractures

    NARCIS (Netherlands)

    J. Siebenga (Jan)

    2013-01-01

    textabstractTraumatic spinal fractures have the lowest functional outcomes and the lowest rates of return to work after injury of all major organ systems.1 This thesis will cover traumatic thoracolumbar spine fractures and not osteoporotic spine fractures because of the difference in fracture

  8. Assessment of fracture risk

    Energy Technology Data Exchange (ETDEWEB)

    Kanis, John A. [WHO Collaborating Centre for Metabolic Bone Diseases, University of Sheffield Medical School, Beech Hill Road, Sheffield S10 2RX (United Kingdom)], E-mail: w.j.pontefract@sheffield.ac.uk; Johansson, Helena; Oden, Anders [WHO Collaborating Centre for Metabolic Bone Diseases, University of Sheffield Medical School, Beech Hill Road, Sheffield S10 2RX (United Kingdom); McCloskey, Eugene V. [WHO Collaborating Centre for Metabolic Bone Diseases, University of Sheffield Medical School, Beech Hill Road, Sheffield S10 2RX (United Kingdom); Osteoporosis Centre, Northern General Hospital, Sheffield (United Kingdom)

    2009-09-15

    Fractures are a common complication of osteoporosis. Although osteoporosis is defined by bone mineral density at the femoral neck, other sites and validated techniques can be used for fracture prediction. Several clinical risk factors contribute to fracture risk independently of BMD. These include age, prior fragility fracture, smoking, excess alcohol, family history of hip fracture, rheumatoid arthritis and the use of oral glucocorticoids. These risk factors in conjunction with BMD can be integrated to provide estimates of fracture probability using the FRAX tool. Fracture probability rather than BMD alone can be used to fashion strategies for the assessment and treatment of osteoporosis.

  9. [Periprosthetic Acetabulum Fractures].

    Science.gov (United States)

    Schreiner, A J; Stuby, F; de Zwart, P M; Ochs, B G

    2016-12-01

    In contrast to periprosthetic fractures of the femur, periprosthetic fractures of the acetabulum are rare complications - both primary fractures and fractures in revision surgery. This topic is largely under-reported in the literature; there are a few case reports and no long term results. Due to an increase in life expectancy, the level of patients' activity and the number of primary joint replacements, one has to expect a rise in periprosthetic complications in general and periprosthetic acetabular fractures in particular. This kind of fracture can be intra-, peri- or postoperative. Intraoperative fractures are especially associated with insertion of cementless press-fit acetabular components or revision surgery. Postoperative periprosthetic fractures of the acetabulum are usually related to osteolysis, for example, due to polyethylene wear. There are also traumatic fractures and fractures missed intraoperatively that lead to some kind of insufficiency fracture. Periprosthetic fractures of the acetabulum are treated conservatively if the implant is stable and the fracture is not dislocated. If surgery is needed, there are many possible different surgical techniques and challenging approaches. That is why periprosthetic fractures of the acetabulum should be treated by experts in pelvic surgery as well as revision arthroplasty and the features specific to the patient, fracture and prosthetic must always be considered. Georg Thieme Verlag KG Stuttgart · New York.

  10. Facial fractures with concomitant open globe injury: mechanisms and fracture patterns associated with blindness.

    Science.gov (United States)

    Vaca, Elbert E; Mundinger, Gerhard S; Kelamis, Joseph A; Dorafshar, Amir H; Christy, Michael R; Manson, Paul N; Rodriguez, Eduardo D

    2013-06-01

    Treatment of facial fractures in the setting of open-globe injuries poses a management dilemma because of the often disparate treatment priorities of multidisciplinary trauma teams and the lack of prognostic data regarding visual outcomes. Patients in the University of Maryland Shock Trauma Registry sustaining facial fractures with concomitant open-globe injuries from January of 1998 to August of 2010 were identified. Odds ratios were calculated to identify demographic and clinical variables associated with blindness, and multivariate regression analysis was performed. A total of 99 patients were identified with 105 open-globe injuries. Seventy-nine percent of injuries were blinding, whereas 4.8 percent of globes achieved a final visual acuity greater than or equal to 20/400. Blindness was associated with penetrating injury, increasing number of facial fractures, zygomaticomaxillary complex fracture, admission Glasgow Coma Scale score less than or equal to 8, and globe injury spanning all three eye zones. Fracture repair was performed more frequently (62.5 percent) and more quickly (average time to fracture repair, 4.5 days) in cases of primary globe enucleation/evisceration when compared with complete (21.2 percent; 8 days; p=0.35) or incomplete (42.9 percent; 11 days; p=0.058) primary globe repair. Penetrating injury mechanism and zone of eye injury appear to be better indicators of visual prognosis than facial fracture patterns. Given the high rates of blindness, secondary enucleation, and delay of fracture repair in patients that were not primarily enucleated, the authors recommend that orbital fracture repair not be delayed in the hopes of eventual visual recovery in cases of high-velocity projectile trauma. Risk, III.

  11. DHPLC/SURVEYOR nuclease: a sensitive, rapid and affordable method to analyze BRCA1 and BRCA2 mutations in breast cancer families.

    Science.gov (United States)

    Pilato, Brunella; De Summa, Simona; Danza, Katia; Papadimitriou, Stavros; Zaccagna, Paolo; Paradiso, Angelo; Tommasi, Stefania

    2012-09-01

    Hereditary breast cancer accounts for about 10% of all breast cancers and BRCA1 and BRCA2 genes have been identified as validated susceptibility genes for this pathology. Testing for BRCA gene mutations is usually based on a pre-screening approach, such as the partial denaturation DHPLC method, and capillary direct sequencing. However, this approach is time consuming due to the large size of BRCA1 and BRCA2 genes. Recently, a new low cost and time saving DHPLC protocol has been developed to analyze gene mutations by using SURVEYOR(®) Nuclease digestion and DHPLC analysis. A subset of 90 patients, enrolled in the Genetic Counseling Program of the National Cancer Centre of Bari (Italy), was performed to validate this approach. Previous retrospective analysis showed that 9/90 patients (10%) were mutated in BRCA1 and BRCA2 genes and these data were confirmed by the present approach. DNA samples underwent touchdown PCR and, subsequently, SURVEYOR(®) nuclease digestion. BRCA1 and BRCA2 amplicons were divided into groups depending on amplicon size to allow multiamplicon digestion. The product of this reaction were analyzed on Transgenomic WAVE Nucleic Acid High Sensitivity Fragment Analysis System. The operator who performed the DHPLC surveyor approach did not know the sequencing results at that time. The SURVEYOR(®) Nuclease DHPLC approach was able to detect all alterations with a sensitivity of 95%. Furthermore, in order to save time and reagents, a multiamplicon setting preparation was validated.

  12. Sacral Fracture Causing Neurogenic Bladder: A Case Report

    Directory of Open Access Journals (Sweden)

    Tatsuro Sasaji

    2012-01-01

    Full Text Available A 76-year-old man presented with a Denis Zone III sacral fracture after a traffic accident. He also developed urinary retention and perineal numbness. The patient was diagnosed with neurogenic bladder dysfunction caused by the sacral fracture. A computed tomogram (CT revealed that third sacral lamina was fractured and displaced into the spinal canal, but vertebral body did not displace. The fracture lines began at the center of lamina and extended bilateraly. The fracture pattern was unique. The sacrum was osteoporosis, and this fracture may be based on osteoporosis. We performed laminectomy to decompress sacral nerve roots. One month after surgery, the patient was able to urinate. Three months after surgery, his bladder function recovered normally. One year after surgery, he returned to a normal daily life and had no complaints regarding urination. One-year postoperative CT showed the decompressed third sacrum without displacement.

  13. Excavation damaged zone

    Energy Technology Data Exchange (ETDEWEB)

    Poulain, S.; Sergeant, C.; Vesvres, M.H.; Simonoff, M.; Lavielle, B.; Thomas, B.; Gilabert, E. [Bordeaux-1 Univ., I and 2/CNRS and GdR FORPRO 0788, Nuclear Analytical and Bioenvironmental Chemistry 33 - Gradignan (France); Poulain, S.; Altmann, S.; Lenoir, N.; Barnichon, J.D.; Wileveau, Y.; Lebon, P. [ANDRA - Agence Nationale pour la Gestion des Dechets Radioactifs, 92 - Chatenay Malabry (France); Le Marrec, C. [Bordeaux-1 Univ., ISTAB, INRA, UMR Oenologie - ISVV, 33 - Talence (France); Vinsot, A.; Dewonck, S.; Wileveau, Y.; Armand, G.; Cruchaudet, P.; Rebours, H.; Morel, J. [Agence Nationale pour la Gestion des Dechets Radioactifs, Lab. de Souterrain de Meuse/Haute-Marne, 55 - Bure (France); Lanyon, G.W. [Fracture Systems Ltd, Tregurrian, Ayr, St Ives, Cornwall (United Kingdom); Marschall, P.; Vietor, T. [NAGRA - National Cooperative for the Disposal of Radioactive Waste, Wettingen (Switzerland); Bourdeau, C.; Dedecker, F.; Billaux, D. [ITASCA Consultants, S.A.S., 69 - Ecully (France); Lenoir, N.; Desrues, J.; Viggiani, G.; Besuelle, P. [Laboratoire 3S-R - Sols Solides Structures-Risques, 38 - Grenoble (France); Bornert, M. [Ecole Polytechnique, LMS - Lab. de Mecanique des Solides, 91 - Palaiseau (France); Arson, C.; Gatmiri, B. [CERMES, Ecole Nationale des Ponts et Chaussees, 77 - Marne-la-Vallee (France); Gatmiri, B. [University of Tehran (Iran, Islamic Republic of); Bernier, F. [ESV EURIDICE GIE - European Underground Research Infrastructure for Disposal of Nuclear Waste in Clay Environment (Belgium); Nussbaum, C.; Mori, O. [Geotechnical Institute Ltd., Fabrique de Chaux, St-Ursanne (Switzerland); Bossart, P. [Swisstopo - Federal Office of Topography, Wabern (Switzerland); Schuster, K.; Alheid, H.J. [BGR - Bundesanstalt fur Geowissenschaften und Rohstoffe, Hannover (Germany); Lavanchy, J.M.; Croise, J.; Schwarz, R. [Colenco Power Engineering AG, Groundwater Protection and Waste Disposal, Baden (Switzerland)] [and others

    2007-07-01

    This session gathers 13 articles dealing with: autochthonous and colonizing microorganisms in argillaceous underground environments (S. Poulain, C. Sergeant, C. Le Marrec, M.H. Vesvres, A. Vinsot, S. Dewonck, M. Simonoff, S. Altmann); the discrete fracture network modelling of the Hg-a experiment at the Mont Terri rock Laboratory (G.W. Lanyon, P. Marschall, T. Vietor); the discrete modelling of drift behaviour in the Meuse/Haute-Marne URL, France (C. Bourdeau, F. Dedecker, D. Billaux); the fracturing in Callovo-Oxfordian argillite under triaxial compression studied by X-ray microtomography (N. Lenoir, J. Desrues, G. Viggiani, P. Besuelle, M. Bornert, J.D. Barnichon); a general review of the damage models for the EDZ creation (C. Arson, B. Gatmiri); similarities in the Hydro-Mechanical response of Callovo-Oxfordian clay and Boom clay during gallery excavation (Y. Wileveau, F. Bernier); the different geometries of the EDZ fracture networks in the Mont Terri and Meuse/Haute-Marne rock laboratories: Structural approach (C. Nussbaum, Y. Wileveau, P. Bossart, A. Moeri, G. Armand); the characterisation of the Excavation-Damaged Zone in the Meuse/Haute-Marne Underground Research Laboratory (G. Armand, P. Lebon, M. Cruchaudet, H. Rebours, J. Morel, Y. Wileveau); the EDZ characterisation with ultrasonic interval velocity measurements in the Meuse/Haute-Marne URL, performed between depth of 85 m and 504 m (K. Schuster, H.J. Alheid); the clay formation at the Meuse Haute Marne URL: evaluation of the impact of resin filled slots on flow paths characteristics within the EDZ (J.M. Lavanchy, J. Croise, R. Schwarz, G. Armand, M. Cruchaudet); the characterisation and evolution of EDZ by extraction and analyse of noble gases in pore waters in the Meuse/Haute Marne URL site (B. Lavielle, B. Thomas, E. Gilabert); in-situ gas test for the characterisation of Excavation Disturbed Zone at the Meuse/Haute Marne URL (H. Shao, K. Schuster, J. Soennke, V. Braeuer); and the flow and reactive

  14. Imaging of vertebral fractures

    Directory of Open Access Journals (Sweden)

    Ananya Panda

    2014-01-01

    Full Text Available Vertebral fracture is a common clinical problem. Osteoporosis is the leading cause of non-traumatic vertebral fracture. Often, vertebral fractures are not clinically suspected due to nonspecific presentation and are overlooked during routine interpretation of radiologic investigations. Moreover, once detected, many a times the radiologist fails to convey to the clinician in a meaningful way. Hence, vertebral fractures are a constant cause of morbidity and mortality. Presence of vertebral fracture increases the chance of fracture in another vertebra and also increases the risk of subsequent hip fracture. Early detection can lead to immediate therapeutic intervention improving further the quality of life. So, in this review, we wish to present a comprehensive overview of vertebral fracture imaging along with an algorithm of evaluation of vertebral fractures.

  15. Failure Engineering Study and Accelerated Stress Test Results for the Mars Global Surveyor Spacecraft's Power Shunt Assemblies

    Science.gov (United States)

    Gibbel, Mark; Larson, Timothy

    2000-01-01

    An Engineering-of-Failure approach to designing and executing an accelerated product qualification test was performed to support a risk assessment of a "work-around" necessitated by an on-orbit failure of another piece of hardware on the Mars Global Surveyor spacecraft. The proposed work-around involved exceeding the previous qualification experience both in terms of extreme cold exposure level and in terms of demonstrated low cycle fatigue life for the power shunt assemblies. An analysis was performed to identify potential failure sites, modes and associated failure mechanisms consistent with the new use conditions. A test was then designed and executed which accelerated the failure mechanisms identified by analysis. Verification of the resulting failure mechanism concluded the effort.

  16. Evaluation of Cast Re-Orientation on a Dental Surveyor Using Three Tripod Techniques: A Survey and In Vitro Study.

    Science.gov (United States)

    Sayed, Mohammed E; Busaily, Idris A; Nahari, Rana J; Hakami, Ruaa O; Maashi, Sami M; Ramireddy, Naveen R

    2017-01-18

    To survey different educational levels (i.e., students, interns, technicians, and prosthodontic faculty) with regard to their opinions, attitudes, and adoption of three selected tripod techniques. The study will also investigate the accuracy of these techniques to reposition casts on the dental surveyor in anterio-posterior (AP) and lateral directions at both technique and educational levels. Tripod points, scored lines, and cemented post tripod techniques were used in this study. Three Kennedy class II modification I stone casts, duplicated from a standard cast, were assigned to each of the tripod techniques. The tilt angles of all casts were set on the dental surveyor to 10° (control angle) in AP and lateral directions using a digital angle gauge with an accuracy of 0.2°. The casts were tripoded accordingly. A total of 243 participants were involved in this study. Participants were first asked to remount the three casts on three different dental surveyors using the tripod technique noted on each cast. Questionnaires were then given to each participant in an individual interview setting; this assured a 100% response rate. The angle differences were calculated. All data were coded and entered into an Excel Spreadsheet file. Statistical analyses were performed using a paired Chi-square, Wilcoxon Matched-pairs, ANOVA, and Tukey post hoc tests at 5% level of significance. No significant difference was found between the educational levels relative to the responses to technique demands, sensitivity, and time required for reorientation (p = 0.08202, 0.8108, 0.6874, respectively); however, the majority of respondents reported low technique demands, low sensitivity, and time saving for technique C in comparison to techniques A and B. Significant differences were noted among the educational levels in response to preference and adoption questions (p = 0.0035 and 0.0015, respectively). The highest percentage of faculty chose technique A for inclusion into the academic

  17. Fracture Criterion for Fracture Mechanics of Magnets

    Institute of Scientific and Technical Information of China (English)

    潘灏; 杨文涛

    2003-01-01

    The applicability and limitation of some fracture criteria in the fracture mechanics of magnets are studied.It is shown that the magnetic field intensity factor can be used as a fracture criterion when the crack in a magnet is only affected by a magnetic field. For some magnetostrictive materials in which the components of magnetostriction strain do not satisfy the compatibility equation of deformation, the stress intensity factor can no longer be effectively applicable as a fracture criterion when the crack in a magnet is affected by a magnetic field and mechanical loads simultaneously.

  18. Seismic signatures of the Lodgepole fractured reservoir in Utah-Wyoming overthrust belt

    Energy Technology Data Exchange (ETDEWEB)

    Parra, J.; Collier, H.; Angstman, B.

    1997-08-01

    In low porosity, low permeability zones, natural fractures are the primary source of permeability which affect both production and injection of fluids. The open fractures do not contribute much to porosity, but they provide an increased drainage network to any porosity. An important approach to characterizing the fracture orientation and fracture permeability of reservoir formations is one based upon the effects of such conditions on the propagation of acoustic and seismic waves in the rock. We present the feasibility of using seismic measurement techniques to map the fracture zones between wells spaced 2400 ft at depths of about 1000 ft. For this purpose we constructed computer models (which include azimuthal anisotropy) using Lodgepole reservoir parameters to predict seismic signatures recorded at the borehole scale, crosswell scale, and 3 D seismic scale. We have integrated well logs with existing 2D surfaces seismic to produce petrophysical and geological cross sections to determine the reservoir parameters and geometry for the computer models. In particular, the model responses are used to evaluate if surface seismic and crosswell seismic measurements can capture the anisotropy due to vertical fractures. Preliminary results suggested that seismic waves transmitted between two wells will propagate in carbonate fracture reservoirs, and the signal can be received above the noise level at the distance of 2400 ft. In addition, the large velocities contrast between the main fracture zone and the underlying unfractured Boundary Ridge Member, suggested that borehole reflection imaging may be appropriate to map and fracture zone thickness variation and fracture distributions in the reservoir.

  19. Hydraulic structure of a fault zone at seismogenic depths (Gole Larghe Fault Zone, Italian Southern Alps)

    Science.gov (United States)

    Bistacchi, Andrea; Mittempergher, Silvia; Di Toro, Giulio; Smith, Steve; Garofalo, Paolo; Vho, Alice

    2016-04-01

    The Gole Larghe Fault Zone (GLFZ, Italian Southern Alps) was exhumed from c. 8 km depth, where it was characterized by seismic activity (pseudotachylytes), but also by hydrous fluid flow (alteration halos and precipitation of hydrothermal minerals in veins and cataclasites). Thanks to glacier-polished outcrops exposing the fault zone over a continuous area > 1 km2, the fault zone architecture has been quantitatively described with an unprecedented detail (Bistacchi 2011, PAGEOPH; Smith 2013, JSG; Mittempergher 2016, this meeting), providing a rich dataset to generate 3D Discrete Fracture Network (DFN) models and simulate the fault zone hydraulic properties. Based on field and microstructural evidence, we infer that the opening and closing of fractures resulted in a toggle-switch mechanism for fluid flow during the seismic cycle: higher permeability was obtained in the syn- to early post-seismic period, when the largest number of fractures was (re)opened by off-fault deformation, then permeability dropped due to hydrothermal mineral precipitation and fracture sealing. Since the fracture network that we observe now in the field is the result of the cumulative deformation history of the fault zone, which probably includes thousands of earthquakes, a fundamental parameter that cannot be directly evaluated in the field is the fraction of fractures-faults that were open immediately after a single earthquake. Postseismic permeability has been evaluated in a few cases in the world thanks to seismological evidences of fluid migration along active fault systems. Therefore, we were able to develop a parametric hydraulic model of the GLFZ and calibrate it, varying the fraction of faults/fractures that were open in the postseismic period, to obtain on one side realistic fluid flow and permeability values, and on the other side a flow pattern consistent with the observed alteration/mineralization pattern. The fraction of open fractures is very close to the percolation threshold

  20. Numerical modeling of the effects of roughness on flow and eddy formation in fractures

    Directory of Open Access Journals (Sweden)

    Scott Briggs

    2017-02-01

    Full Text Available The effect of roughness on flow in fractures was investigated using lattice Boltzmann method (LBM. Simulations were conducted for both statistically generated hypothetical fractures and a natural dolomite fracture. The effect of increasing roughness on effective hydraulic aperture, Izbash and Forchheimer parameters with increasing Reynolds number (Re ranging from 0.01 to 500 was examined. The growth of complex flow features, such as eddies arising near the fracture surface, was directly associated with changes in surface roughness. Rapid eddy growth above Re values of 1, followed by less rapid growth at higher Re values, suggested a three-zone nonlinear model for flow in rough fractures. This three-zone model, relating effective hydraulic conductivity to Re, was also found to be appropriate for the simulation of water flow in the natural dolomite fracture. Increasing fracture roughness led to greater eddy volumes and lower effective hydraulic conductivities for the same Re values.

  1. 梁山隧道深埋富水陡倾软弱带突水涌泥机制分析及旋喷技术%Analysis on Mechanism of Water Gushing and Mud Inflow When Tunneling through Deep-covered Steep Water-rich Fracture Zone and Application of Horizontal Jet Grouting Piles:Case Study on Liangshan Tunnel

    Institute of Scientific and Technical Information of China (English)

    吴培荣

    2015-01-01

    Liangshan tunnel is one of the key works on Xiamen-Shenzhen railway.During the construction of the tunnel, water gushing and mud inflow often occur,due to the deep-covered water-rich steep soft fracture zone met.In the paper, the characteristics of the water gushing,mud inflow and ground surface collapse are studied,and the water gushing and mud inflow mechanism is analyzed.It is concluded that fully-weathered materials and ground water under the effect of high seepage pressure difference induced by tunnel excavation are the main causes for the water gushing and mud inflow, and that the ground surface collapse is induced by the sudden drop of the ground water level.After investigation, theoretical analysis and tests,it is determined that long-distance horizontal jet grouting piles be used to reinforce the fracture zone.The layout,construction process and inspection standard of the jet grouting piles are also presented in the paper.The practice shows that the long-distance horizontal jet grouting piles mentioned are feasible and effective in the consolidation of the fracture zone.%梁山隧道是厦深铁路福建段的控制工程之一,施工中遇到深埋富水陡倾软弱带,多次导致突水涌泥及洞顶塌陷情况。通过研究突水涌泥及洞顶塌陷的灾害特征,分析得到突水涌泥机制,即:在这种多因素复杂地质条件下,隧道开挖导致形成极高的渗透压力差,并产生新的地下临空通道,在地下水渗透压力作用和自身重力作用下,全风化物质涌入隧道,形成突水涌泥;而软弱构造带塌陷的主要原因为地下水位的急剧下降。通过调研、理论分析及试验等方法,确定采用长距离水平旋喷桩通过软弱带,并提出其布置形式、施工工艺及检验标准。工程实践证明,采用长距离水平旋喷桩作为预加固手段是可行且有效的。

  2. Tibia (Shinbone) Shaft Fractures

    Science.gov (United States)

    ... energy collisions, such as an automobile or motorcycle crash, are common causes of tibial sha fractures. In cases like these, the bone can be broken into several pieces (comminuted fracture). Sports injuries, such as a fall while skiing or running ...

  3. Fractures in anisotropic media

    Science.gov (United States)

    Shao, Siyi

    Rocks may be composed of layers and contain fracture sets that cause the hydraulic, mechanical and seismic properties of a rock to be anisotropic. Coexisting fractures and layers in rock give rise to competing mechanisms of anisotropy. For example: (1) at low fracture stiffness, apparent shear-wave anisotropy induced by matrix layering can be masked or enhanced by the presence of a fracture, depending on the fracture orientation with respect to layering, and (2) compressional-wave guided modes generated by parallel fractures can also mask the presence of matrix layerings for particular fracture orientations and fracture specific stiffness. This report focuses on two anisotropic sources that are widely encountered in rock engineering: fractures (mechanical discontinuity) and matrix layering (impedance discontinuity), by investigating: (1) matrix property characterization, i.e., to determine elastic constants in anisotropic solids, (2) interface wave behavior in single-fractured anisotropic media, (3) compressional wave guided modes in parallel-fractured anisotropic media (single fracture orientation) and (4) the elastic response of orthogonal fracture networks. Elastic constants of a medium are required to understand and quantify wave propagation in anisotropic media but are affected by fractures and matrix properties. Experimental observations and analytical analysis demonstrate that behaviors of both fracture interface waves and compressional-wave guided modes for fractures in anisotropic media, are affected by fracture specific stiffness (controlled by external stresses), signal frequency and relative orientation between layerings in the matrix and fractures. A fractured layered medium exhibits: (1) fracture-dominated anisotropy when the fractures are weakly coupled; (2) isotropic behavior when fractures delay waves that are usually fast in a layered medium; and (3) matrix-dominated anisotropy when the fractures are closed and no longer delay the signal. The

  4. Sprains, Strains and Fractures

    Science.gov (United States)

    ... Young Physicians Annual Scientific Meeting Webinars Careers in Podiatry APMA 2040 Student Profiles CPME REdRC Manage Your ... and fractures. Many fractures and sprains occur during sports. Football players are particularly vulnerable to foot and ...

  5. Hip fracture - discharge

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000168.htm Hip fracture - discharge To use the sharing features on this page, please enable JavaScript. Hip fracture surgery is done to repair a break in ...

  6. Hip fracture surgery

    Science.gov (United States)

    ... neck fracture repair; Trochanteric fracture repair; Hip pinning surgery; Osteoarthritis - hip ... You may receive general anesthesia for this surgery. This means you ... spinal anesthesia . With this kind of anesthesia, medicine is ...

  7. Metatarsal stress fractures - aftercare

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000553.htm Metatarsal stress fractures - aftercare To use the sharing features on ... that connect your ankle to your toes. A stress fracture is a break in the bone that ...

  8. Periprosthetic acetabular fractures.

    Science.gov (United States)

    Benazzo, Francesco; Formagnana, Mario; Bargagliotti, Marco; Perticarini, Loris

    2015-10-01

    The aim of this article is to propose a diagnostic and therapeutic algorithm for the acetabular periprosthetic fractures. This article explores the current literature on the epidemiology, causes and classification of periprosthetic acetabular fractures. Integrating data with the experience of the authors, it offers a guide to diagnosis and possible therapeutic strategies. Intra-operative fractures can occur during rasping, reaming or implant impaction, and they must be treated immediately if the component(s) is (are) unstable. Post-operative fractures can be due to major trauma (acute fractures) or minor forces in bone osteolysis; it is possible to plan reconstruction and fixation according to fracture characteristics. Treatment choice depends upon fracture site and implant stability. Periprosthetic acetabular fractures are uncommon complications that can occur intra-operatively or post-operatively, and a reconstructive surgeon must be able to manage the procedure. Accurate planning and reconstruction implant are necessary to achieve good cup stability.

  9. Study of fractures in Precambrian crystalline rocks using field technique in and around Balarampur, Purulia district, West Bengal, India

    Indian Academy of Sciences (India)

    Monalisa Mitra; Tapas Acharya

    2015-12-01

    Location of recharge zone in Precambrian crystalline rock is still unclear. The present study attempts to perform a detailed analysis of the joints/fractures developed in a Precambrian metamorphic terrain in and around Balarampur in Purulia district of West Bengal, India using bedrock data. The analysis shows that the orientations of major fracture trends are variable along with varying lithological units and structural affinities. The application of lithology-based analysis technique identifies highly predominant fracture frequency and fracture aperture in mica schist and phyllite in the area. This property is not evident in the granite gneiss and epidiorite. The moderate to high fracture permeability value is also associated with the fractures occurring in the shear zone. Mica schist and phyllite associated with the shear zone may represent a permeable recharge zone in the region.

  10. Identifying osteoporotic vertebral fracture

    OpenAIRE

    Griffith, James F.

    2015-01-01

    Osteoporosis per se is not a harmful disease. It is the sequela of osteoporosis and most particularly the occurrence of osteoporotic fracture that makes osteoporosis a serious medical condition. All of the preventative measures, investigations, treatment and research into osteoporosis have one primary goal and that is to prevent the occurrence of osteoporotic fracture. Vertebral fracture is by far and away the most prevalent osteoporotic fracture. The significance and diagnosis of vertebral f...

  11. RESEARCH ON COUNTERMEASURE OF WATER GUSHING WITH COLLAPSE IN PROCESS OF WUSHAOLING HIGHWAY TUNNEL CROSSING F4 FAULT FRACTURE ZONE%高速公路乌鞘岭隧道穿越F4断层破碎带涌水塌方工程对策研究

    Institute of Scientific and Technical Information of China (English)

    李生杰; 谢永利; 朱小明

    2013-01-01

    针对高速公路乌鞘岭隧道穿越 F4断层破碎带发生的涌水塌方事故,结合地质情况和涌水塌方特征,采用地质勘察、现场实测、理论分析等研究方法,探讨乌鞘岭隧道涌水塌方机制及其导致的初期支护破坏的原因,分析其与断层破碎带围岩、地下水、地质构造之间的联系。本段涌水塌方属于断层破碎带引发的泥砾石型突涌灾害。在此基础上,研究涌水段和掌子面的支护设计及施工组织方案,提出相应的工程对策。现场监测结果显示,处治措施实施后,取得较为满意的效果,保证了复杂地质条件下隧道施工的安全。对类似条件下的隧道修建具有重要的指导作用和参考价值。%The water gushing with collapse in process of Wushaoling highway tunnel crossing F4 fault fracture zone is introduced. Combining with geological conditions of F4 fault fracture zone and features of water gushing with collapse,according to the methods of geological survey,field measurement and theoretical analysis,the mechanism of water gushing with collapse and the reasons of initial support failure caused by water gushing and collapse are investigated,and the inner links of which with the surrounding rocks,underground water and geologic structure are analyzed. The water crushing collapse is a kind of the gravel inrush hazard caused by the crushed belts of fault. The support design and construction organization scheme for segments with water gushing and tunnel face are researched,and treatment measures are proposed. According to the measurement results,it is shown that the treatment measures can achieve satisfying results and can ensure the safety of tunnel construction under complicated geological conditions. This research could play an important guiding role and provides a significant reference value for tunnel construction under similar conditions.

  12. Macrofouling of deep-sea instrumentation after three years at 3690 m depth in the Charlie Gibbs fracture zone, mid-Atlantic ridge, with emphasis on hydroids (Cnidaria: Hydrozoa)

    Science.gov (United States)

    Blanco, R.; Shields, M. A.; Jamieson, A. J.

    2013-12-01

    Macrofouling is a common problem when deploying underwater instrumentation for long periods of time. It is a problem which can effect scientific experiments and monitoring missions though the creation of artificial reefs (thus increasing local biological activity) and reduce the quality of scientific data. Macrofouling is an issue typically considered to be restricted to the photic zones and is absent or negligible in the deep sea. To the contrary, the recovery of an accidentally lost deep-sea lander after 3 years submergence at 3960 m on the Mid-Atlantic Ridge (North Atlantic) revealed dense colonisation of macrofouling organisms. These organisms were found attached to all surfaces of the lander regardless of orientation and materials. The occurrence of such deep-sea macrofouling should be carefully investigated given the recent developments in long-term deep-sea observatory networks.

  13. Fractured-basement reservoir modeling using continuous fracture modeling (CFM) method

    Science.gov (United States)

    Isniarny, Nadya; Haris, Abdul; Nurdin, Safrizal

    2016-02-01

    The challenge in oil and gas exploration has now shifted due to increasingly difficult to get back up economic value in a conventional reservoir. Explorationist are developing various drilling technology, optimizing conventional reserves and unconventional reserve in reservoirs. One of the unconventional reservoir that has been developed is the basement reservoir. This rock type has no primary porosity and the permeability of the rocks of this type are generally influenced by the naturally fracture networks. The purpose of this study is to map the fracture intensity distribution in the basement reservoir using Continuous Fracture Modeling (CFM) method. CFM method applies the basic concepts of neural network in finding a relationship between well data with seismic data in order to build a model of fracture intensity. The Formation Micro Imager (FMI) interpretation data is used to identify the presence of fracture along the well as dip angle and dip azimuth. This indicator will be laterally populated in 3D grid model. Several seismic attribute which are generated from seismic data is used as a guidance to populate fracture intensity in the model. The results from the model were validated with Drill Stem Test (DST) data. Zones of high fracture intensity on the model correlates positively with the presence of fluid in accordance with DST data.

  14. Fracture prevention in men

    NARCIS (Netherlands)

    Geusens, PP; Sambrook, P.N.; Lems, W.F.

    2009-01-01

    The lifetime risk of experiencing a fracture in 50-year-old men is lower (20%) than the risk in women (50%). Consequently, much less research has been carried out on osteoporosis and fracture risk in men. Differences in the risk and incidence of fractures between men and women are related to differe

  15. Imaging of insufficiency fractures

    Energy Technology Data Exchange (ETDEWEB)

    Krestan, Christian [Department of Radiology, Medical University of Vienna, Vienna General Hospital, Waehringerstr. 18-20, 1090 Vienna (Austria)], E-mail: christian.krestan@meduniwien.ac.at; Hojreh, Azadeh [Department of Radiology, Medical University of Vienna, Vienna General Hospital, Waehringerstr. 18-20, 1090 Vienna (Austria)

    2009-09-15

    This review focuses on the occurrence, imaging and differential diagnosis of insufficiency fractures. Prevalence, the most common sites of insufficiency fractures and their clinical implications are discussed. Insufficiency fractures occur with normal stress exerted on weakened bone. Postmenopausal osteoporosis is the most common cause of insufficiency fractures. Other conditions which affect bone turnover include osteomalacia, hyperparathyroidism, chronic renal failure and high-dose glucocorticoid therapy. It is a challenge for the radiologist to detect and diagnose insufficiency fractures, and to differentiate them from other bone lesions. Radiographs are still the most widely used imaging method for identification of insufficiency fractures, but sensitivity is limited, depending on the location of the fractures. Magnetic resonance imaging (MRI) is a very sensitive tool to visualize bone marrow abnormalities associated with insufficiency fractures. Thin section, multi-detector computed tomography (MDCT) depicts subtle fracture lines allowing direct visualization of cortical and trabecular bone. Bone scintigraphy still plays a role in detecting fractures, with good sensitivity but limited specificity. The most important differential diagnosis is underlying malignant disease leading to pathologic fractures. Bone densitometry and clinical history may also be helpful in confirming the diagnosis of insufficiency fractures.

  16. Fracture properties from tight reservoir outcrop analogues with application to geothermal exploration

    Science.gov (United States)

    Philipp, Sonja L.; Reyer, Dorothea; Afsar, Filiz; Bauer, Johanna F.; Meier, Silke; Reinecker, John

    2015-04-01

    In geothermal reservoirs, similar to other tight reservoirs, fluid flow may be intensely affected by fracture systems, in particular those associated with fault zones. When active (slipping) the fault core, that is, the inner part of a fault zone, which commonly consists of breccia or gouge, can suddenly develop high permeability. Fault cores of inactive fault zones, however, may have low permeabilities and even act as flow barriers. In the outer part of a fault zone, the damage zone, permeability depends mainly on the fracture properties, that is, the geometry (orientation, aperture, density, connectivity, etc.) of the fault-associated fracture system. Mineral vein networks in damage zones of deeply eroded fault zones in palaeogeothermal fields demonstrate their permeability. In geothermal exploration, particularly for hydrothermal reservoirs, the orientation of fault zones in relation to the current stress field as well as their internal structure, in particular the properties of the associated fracture system, must be known as accurately as possible for wellpath planning and reservoir engineering. Here we present results of detailed field studies and numerical models of fault zones and associated fracture systems in palaeogeo¬thermal fields and host rocks for geothermal reservoirs from various stratigraphies, lithologies and tectonic settings: (1) 74 fault zones in three coastal sections of Upper Triassic and Lower Jurassic age (mudstones and limestone-marl alternations) in the Bristol Channel Basin, UK. (2) 58 fault zones in 22 outcrops from Upper Carboniferous to Upper Cretaceous in the Northwest German Basin (siliciclastic, carbonate and volcanic rocks); and (3) 16 fault zones in 9 outcrops in Lower Permian to Middle Triassic (mainly sandstone and limestone) in the Upper Rhine Graben shoulders. Whereas (1) represent palaeogeothermal fields with mineral veins, (2) and (3) are outcrop analogues of reservoir horizons from geothermal exploration. In the study

  17. Non-local plasticity effects on fracture toughness

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof

    2002-01-01

    The Mode I fracture strength in a nonlocal elastic-plastic material is analyzed under quasi-static steady crack growth. The plastic deformations are modelled using a constitutive model, where nonlocal plasticity effects are included in the instantaneous hardening moduli through a gradient measure...... of the effective plastic strain. Fracture is modelled by a cohesive zone criterion. Results on the numerically obtained stress fields are presented, as well as results on the steady-state fracture toughness. It is shown that the nonlocal theory predicts lower steady-state fracture toughness compared to predictions...... by conventional J2-flow theory, since higher normal stresses in front of the crack tip are predicted. Furthermore, the nonlocal material description increases the range of applicability of the cohesive zone model, since steady-state crack growth is possible for significantly larger values of the maximum stress...

  18. Non-local plasticity effects on fracture toughness

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof

    2002-01-01

    The Mode I fracture strength in a nonlocal elastic-plastic material is analyzed under quasi-static steady crack growth. The plastic deformations are modelled using a constitutive model, where nonlocal plasticity effects are included in the instantaneous hardening moduli through a gradient measure...... of the effective plastic strain. Fracture is modelled by a cohesive zone criterion. Results on the numerically obtained stress fields are presented, as well as results on the steady-state fracture toughness. It is shown that the nonlocal theory predicts lower steady-state fracture toughness compared to predictions...... by conventional J2-flow theory, since higher normal stresses in front of the crack tip are predicted. Furthermore, the nonlocal material description increases the range of applicability of the cohesive zone model, since steady-state crack growth is possible for significantly larger values of the maximum stress...

  19. Development of fractures in soft rock surrounding a roadway and their control

    Institute of Scientific and Technical Information of China (English)

    Li Xuehua; Yao Qiangling; Man Jiankang; Chen Chaoqun; He Lihui

    2011-01-01

    As the excavation of roadway,new fractures will be formed and the pre-existing fractures extend with the redistribution of stress in surrounding rocks.Eventually,fracture zone and bed separation are formed in rocks because of the developed fractures.Therefore,mastering the fracture evolution of surrounding rocks is very important to maintain the stability of roadway.The surrounding rocks of main haulage roadway in a certain coal mine is so broken and loose that the supporting is very difficult.Based on comprehensive analysis of the engineering geological conditions,a sight instrument was used to observe the fractures of internal surrounding rocks.Four indices,i.e.,the width of fracture zone W,the number of fractures n,the width of fractures d and rock fracture designation RFD,are put forward to evaluate the fracture development.According to the evolution rules of the soft rock roadway from this paper,control principles by stages and by regions are presented through the research.At the same time,the best time of grouting reinforcement is determined on the basis of fracture saturation.Field practice shows that the roadway can satisfy normal production during service periods by suitable first support and grouting reinforcement.

  20. Scale and Time Effects in Hydraulic Fracturing.

    Science.gov (United States)

    1984-07-01

    Results on Teton Dam Silt Test Groove Dry Water Fracturing No. Size Density Content Pressure b d t/m 3 %kg/cm 2 in. in. - IG2 3. 1.51.5920.43.2 G3 2.0...a loose zone through which water pressures were applied. • 111 Table 5.2 Summary of Type IV Test Results on Teton Dam Silt Series Test Slot Dry Water Fracturing...Series Test Slot Dry Water Fracturing No. No. Width Density Content Pressure in. t/m 3 % kg/cm 2 S12 0.125 1.60 19.1 3.6 S13 0.25 1.60 19.5 3.9 I S14

  1. Fracture mineralogy of the Forsmark site. SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Sandstroem, Bjoern (Dept. of Earth Sciences, Univ. of Goeteborg (Sweden)); Tullborg, Eva-Lena (Terralogica AB, Graabo (Sweden)); Smellie, John (Conterra AB, Luleaa (Sweden)); MacKenzie, Angus B. (SUERC, Scottish Enterprise Technology Park, East Kilbride (United Kingdom)); Suksi, Juhani (Dept. of Chemistry, Univ. of Helsinki, Helsinki (Finland))

    2008-08-15

    Detailed investigations of the fracture mineralogy and altered wall rock have been carried out as part of the site characterisation programme between 2003 and 2007 at Forsmark. The results have been published in a number of P-reports and in contributions to scientific journals. This report summarises and evaluates the data obtained during the detailed fracture mineralogical studies. The report includes descriptions of the identified fracture minerals and their chemical composition. A sequence of fracture mineralisations has been distinguished and provides information of the low to moderate temperature (brittle) geological and hydrogeological evolution at the site. Special focus has been paid to the chemical and stable isotopic composition of calcite to obtain palaeohydrogeological information. Chemical analyses of bulk fracture filling material have been carried out to identify possible sinks for certain elements and also to reveal the presence of minor phases rich in certain elements which have not been possible to detect by X-ray diffraction (XRD). Statistical analysis of the mineralogy in fractures outside deformation zones (i.e. within fracture domains FFM01, FFM02, FFM03 and FFM06) have been carried out concerning variation of fracture mineral distribution at depth and in different fracture domains. Uranium contents and uranium-series isotopes have been analysed on fracture coating material from hydraulically conductive fractures. Such analyses are also available from the groundwaters and the results are combined in order to reveal recent (< 1 Ma) removal/deposition of uranium in the fracture system. The redox conditions in the fracture system have been evaluated based on mineralogical and chemical indicators as well as Moessbauer analyses

  2. Proximal humerus fractures.

    Science.gov (United States)

    Price, Matthew C; Horn, Pamela L; Latshaw, James C

    2013-01-01

    Proximal humerus fractures are among the most common fractures associated with osteoporosis. With an aging population, incidence of these fractures will only increase. The proximal humerus not only forms the lateral portion of the shoulder articulation but also has significant associations with musculoskeletal and neurovascular structures. As a result, fractures of the proximal humerus can significantly impact not only the function of the shoulder joint, but the health and function of the entire upper extremity as well. Understanding of these fractures, the management options, and associated nursing care, can help reduce morbidity rate and improve functional outcomes.

  3. Stress fractures in runners.

    Science.gov (United States)

    McCormick, Frank; Nwachukwu, Benedict U; Provencher, Matthew T

    2012-04-01

    Stress fractures are a relatively common entity in athletes, in particular, runners. Physicians and health care providers should maintain a high index of suspicion for stress fractures in runners presenting with insidious onset of focal bone tenderness associated with recent changes in training intensity or regimen. It is particularly important to recognize “high-risk” fractures, as these are associated with an increased risk of complication. A patient with confirmed radiographic evidence of a high-risk stress fracture should be evaluated by an orthopedic surgeon. Runners may benefit from orthotics, cushioned sneakers, interval training, and vitamin/calcium supplementation as a means of stress fracture prevention.

  4. Role of MRI in hip fractures, including stress fractures, occult fractures, avulsion fractures

    Energy Technology Data Exchange (ETDEWEB)

    Nachtrab, O. [Department of Radiology, The Robert Jones and Agnes Hunt Orthopaedic Hospital, Gobowen, Oswestry Shropshire SY10 7AG (United Kingdom); Cassar-Pullicino, V.N., E-mail: Victor.Pullicino@rjah.nhs.uk [Department of Radiology, The Robert Jones and Agnes Hunt Orthopaedic Hospital, Gobowen, Oswestry Shropshire SY10 7AG (United Kingdom); Lalam, R.; Tins, B.; Tyrrell, P.N.M.; Singh, J. [Department of Radiology, The Robert Jones and Agnes Hunt Orthopaedic Hospital, Gobowen, Oswestry Shropshire SY10 7AG (United Kingdom)

    2012-12-15

    MR imaging plays a vital role in the diagnosis and management of hip fractures in all age groups, in a large spectrum of patient groups spanning the elderly and sporting population. It allows a confident exclusion of fracture, differentiation of bony from soft tissue injury and an early confident detection of fractures. There is a spectrum of MR findings which in part is dictated by the type and cause of the fracture which the radiologist needs to be familiar with. Judicious but prompt utilisation of MR in patients with suspected hip fractures has a positive therapeutic impact with healthcare cost benefits as well as social care benefits.

  5. Fractures in multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Jensen, K

    1991-01-01

    In a cross-sectional study of 299 MS patients 22 have had fractures and of these 17 after onset of MS. The fractures most frequently involved the femoral neck and trochanter (41%). Three patients had had more than one fracture. Only 1 patient had osteoporosis. The percentage of fractures increased...... with increasing age and disease duration. Among 34 deceased MS patients 4 had had fractures. These findings are discussed in relation to physical and cognitive impairment in MS. A case-control study is recommended....

  6. Heterogeneous alternation of fractured rock driven by preferential carbonate dissolution

    Science.gov (United States)

    Wen, H.; Zhi, W.; Li, L.

    2016-12-01

    Understanding the alternation of fractured rock induced by geochemical reactions is critical for predicting the flow, solute transport and energy production in geosystems. Most existing studies on fracture alterations focus on rocks with single minerals where reactions occur at the fracture wall resulting in fracture aperture alteration while ignoring rock matrix properties (e.g. the formation and development of altered zones). In this work, we aimed to mechanistically understand the role of preferential calcite dissolution in the long-term evolution of fracture and rock matrix. We use direct simulation of physics-based reactive transport processes in an image of fractured rock at the resolution of tens of micrometers. Three numerical experiments were carried out with the same initial physical properties however different calcite content. Simulation results show that the formation and development of altered zones in the rock matrix is highly related to the abundance of fast-dissolving calcite. Abundant calcite (50% (v/v), calcite50) leads to a localized, thick zone of large porosity increase while low calcite content (10% (v/v), calcite10) creates an extended and narrow zone of small porosity increase resulting in surprisingly larger change in effective transport property. After 300 days of dissolution, although with relatively similar dissolved calcite mass and matrix porosity increase, effective matrix diffusion coefficients increase by 9.9 and 19.6 times in calcite50 and calcite10, respectively. In turn, calcite dissolution rates are directly limited by diffusive transport in the altered matrix and the shape of the altered zone. This work sheds light on the unique characteristics of reactive transport in fractured, mineralogically complex rocks that are different from those with single minerals (Wen et al., 2016). Reference: Wen, H., Li, L., Crandall, D. and Hakala, J.A. (2016) Where Lower Calcite Abundance Creates More Alteration: Enhanced Rock Matrix

  7. [Fractures of carpal bones].

    Science.gov (United States)

    Lögters, T; Windolf, J

    2016-10-01

    Fractures of the carpal bones are uncommon. On standard radiographs fractures are often not recognized and a computed tomography (CT) scan is the diagnostic method of choice. The aim of treatment is to restore pain-free and full functioning of the hand. A distinction is made between stable and unstable carpal fractures. Stable non-displaced fractures can be treated conservatively. Unstable and displaced fractures have an increased risk of arthritis and non-union and should be stabilized by screws or k‑wires. If treated adequately, fractures of the carpal bones have a good prognosis. Unstable and dislocated fractures have an increased risk for non-union. The subsequent development of carpal collapse with arthrosis is a severe consequence of non-union, which has a heterogeneous prognosis.

  8. Orbital fractures: a review

    Directory of Open Access Journals (Sweden)

    Jeffrey M Joseph

    2011-01-01

    Full Text Available Jeffrey M Joseph, Ioannis P GlavasDivision of Ophthalmic Plastic and Reconstructive Surgery, Department of Ophthalmology, School of Medicine, New York University, New York, NY, USA; Manhattan Eye, Ear, and Throat Hospital, New York, NY, USAAbstract: This review of orbital fractures has three goals: 1 to understand the clinically relevant orbital anatomy with regard to periorbital trauma and orbital fractures, 2 to explain how to assess and examine a patient after periorbital trauma, and 3 to understand the medical and surgical management of orbital fractures. The article aims to summarize the evaluation and management of commonly encountered orbital fractures from the ophthalmologic perspective and to provide an overview for all practicing ophthalmologists and ophthalmologists in training.Keywords: orbit, trauma, fracture, orbital floor, medial wall, zygomatic, zygomatic complex, zmc fracture, zygomaticomaxillary complex fractures 

  9. Oblique Axis Body Fracture

    DEFF Research Database (Denmark)

    Takai, Hirokazu; Konstantinidis, Lukas; Schmal, Hagen

    2016-01-01

    Purpose. Anderson type III odontoid fractures have traditionally been considered stable and treated conservatively. However, unstable cases with unfavorable results following conservative treatment have been reported. Methods. We present the cases of two patients who sustained minimally displaced...... Anderson type III fractures with a characteristic fracture pattern that we refer to as "oblique type axis body fracture." Results. The female patients aged 90 and 72 years, respectively, were both diagnosed with minimally displaced Anderson type III fractures. Both fractures had a characteristic "oblique...... type" fracture pattern. The first patient was treated conservatively with cervical spine immobilization in a semirigid collar. However, gross displacement was noted at the 6-week follow-up visit. The second patient was therefore treated operatively by C1-C3/4 posterior fusion and the course...

  10. Simultaneous mutation detection of three homoeologous genes in wheat by High Resolution Melting analysis and Mutation Surveyor®

    Directory of Open Access Journals (Sweden)

    Vincent Kate

    2009-12-01

    Full Text Available Abstract Background TILLING (Targeting Induced Local Lesions IN Genomes is a powerful tool for reverse genetics, combining traditional chemical mutagenesis with high-throughput PCR-based mutation detection to discover induced mutations that alter protein function. The most popular mutation detection method for TILLING is a mismatch cleavage assay using the endonuclease CelI. For this method, locus-specific PCR is essential. Most wheat genes are present as three similar sequences with high homology in exons and low homology in introns. Locus-specific primers can usually be designed in introns. However, it is sometimes difficult to design locus-specific PCR primers in a conserved region with high homology among the three homoeologous genes, or in a gene lacking introns, or if information on introns is not available. Here we describe a mutation detection method which combines High Resolution Melting (HRM analysis of mixed PCR amplicons containing three homoeologous gene fragments and sequence analysis using Mutation Surveyor® software, aimed at simultaneous detection of mutations in three homoeologous genes. Results We demonstrate that High Resolution Melting (HRM analysis can be used in mutation scans in mixed PCR amplicons containing three homoeologous gene fragments. Combining HRM scanning with sequence analysis using Mutation Surveyor® is sensitive enough to detect a single nucleotide mutation in the heterozygous state in a mixed PCR amplicon containing three homoeoloci. The method was tested and validated in an EMS (ethylmethane sulfonate-treated wheat TILLING population, screening mutations in the carboxyl terminal domain of the Starch Synthase II (SSII gene. Selected identified mutations of interest can be further analysed by cloning to confirm the mutation and determine the genomic origin of the mutation. Conclusion Polyploidy is common in plants. Conserved regions of a gene often represent functional domains and have high sequence

  11. Fracture development in shale and its relationship to gas accumulation

    Directory of Open Access Journals (Sweden)

    Wenlong Ding

    2012-01-01

    Full Text Available Shale with high quartz, feldspar and carbonate, will have low Poisson’s ratio, high Young’s modulus and high brittleness. As a result, the shale is conducive to produce natural and induced fractures under external forces. In general, there is a good correlation between fracture development in shale and the volume of brittle minerals present. Shale with high TOC or abnormally high pressure has well-developed fractures. Shale fracture development also shows a positive correlation with total gas accumulation and free gas volume, i.e., the better shale fractures are developed, the greater the gas accumulation and therefore the higher the gas production. Fractures provide migration conduits and accumulation spaces for natural gas and formation water, which are favorable for the volumetric increase of free natural gas. Wider fractures in shale result in gas loss. In North America, there is a high success ratio of shale gas exploration and high gas production from high-angle fracture zones in shale. Good natural gas shows or low yield producers in the Lower Paleozoic marine organic matter-rich rocks in the Sichuan Basin are closely related to the degree of fracture development in brittle shales.

  12. Research on fracture analysis, groundwater flow and sorption processes in fractured rocks

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dae Ha [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    Due to increasing demand for numerous industrial facilities including nuclear power plants and waste repositories, the feasibility of rocks masses as sites for the facilities has been a geological issue of concern. Rock masses, in general, comprises systems of fractures which can provide pathways for groundwater flow and may also affect the stability of engineered structures. such properties of fractures stimulate a synthetic study on (1) analyses of fracture systems, and (2) characterization of groundwater flow and sorption processes in fractured rocks to establish a preliminary model for assessing suitable sites for industrial facilities. The analyses of fracture systems cover (1) reconstruction of the Cenozoic tectonic movements and estimation of frequency indices for the Holocene tectonic movements, (2) determination of distributions and block movements of the Quaternary marine terraces, (3) investigation of lithologic and geotechnical nature of study area, and (4) examination of the Cenozoic volcanic activities and determination of age of the dike swarms. Using data obtained from above mentioned analyses along with data related to earthquakes and active faults, probabilistic approach is performed to determine various potential hazards which may result from the Quaternary or the Holocene tectonic movements. In addition, stepwise and careful integration of various data obtained from field works and laboratory experiments are carried out to analyze groundwater flow in fractures rocks as follows; (1) investigation of geological feature of the site, (2) identification and characterization of fracture systems using core and televiewer logs, (3) determination of conductive fractures using electrical conductivity, temperature, and flow logs, (4) identification of hydraulic connections between fractures using televiewer logs with tracer tests within specific zones. The results obtained from these processes allow a qualitative interpretation of groundwater flow patterns

  13. Research on fracture analysis, groundwater flow and sorption processes in fractured rocks

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dae Ha [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    Due to increasing demand for numerous industrial facilities including nuclear power plants and waste repositories, the feasibility of rocks masses as sites for the facilities has been a geological issue of concern. Rock masses, in general, comprises systems of fractures which can provide pathways for groundwater flow and may also affect the stability of engineered structures. such properties of fractures stimulate a synthetic study on (1) analyses of fracture systems, and (2) characterization of groundwater flow and sorption processes in fractured rocks to establish a preliminary model for assessing suitable sites for industrial facilities. The analyses of fracture systems cover (1) reconstruction of the Cenozoic tectonic movements and estimation of frequency indices for the Holocene tectonic movements, (2) determination of distributions and block movements of the Quaternary marine terraces, (3) investigation of lithologic and geotechnical nature of study area, and (4) examination of the Cenozoic volcanic activities and determination of age of the dike swarms. Using data obtained from above mentioned analyses along with data related to earthquakes and active faults, probabilistic approach is performed to determine various potential hazards which may result from the Quaternary or the Holocene tectonic movements. In addition, stepwise and careful integration of various data obtained from field works and laboratory experiments are carried out to analyze groundwater flow in fractures rocks as follows; (1) investigation of geological feature of the site, (2) identification and characterization of fracture systems using core and televiewer logs, (3) determination of conductive fractures using electrical conductivity, temperature, and flow logs, (4) identification of hydraulic connections between fractures using televiewer logs with tracer tests within specific zones. The results obtained from these processes allow a qualitative interpretation of groundwater flow patterns

  14. Emergence of anomalous transport in stressed rough fractures

    Science.gov (United States)

    Kang, Peter K.; Brown, Stephen; Juanes, Ruben

    2016-11-01

    We report the emergence of anomalous (non-Fickian) transport through a rough-walled fracture as a result of increasing normal stress on the fracture. We show that the origin of this anomalous transport behavior can be traced to the emergence of a heterogeneous flow field dominated by preferential channels and stagnation zones, as a result of the larger number of contacts in a highly stressed fracture. We show that the velocity distribution determines the late-time scaling of particle spreading, and velocity correlation determines the magnitude of spreading and the transition time from the initial ballistic regime to the asymptotic anomalous behavior. We also propose a spatial Markov model that reproduces the transport behavior at the scale of the entire fracture with only three physical parameters. Our results point to a heretofore unrecognized link between geomechanics and particle transport in fractured media.

  15. Three-point bending fracture characteristics of bulk metallic glasses

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    This paper presents the SEM micrographs for the three-point bending fracture surfaces of Zr-based, Ce-based and Mg-based bulk metallic glasses (BMGs), which show the dimple structures in the three kinds of BMGs. The shapes of the giant plastic deformation domain on the fracture surface are similar but the sizes are different. The fracture toughness KC and the dimple structure size of the Zr-based BMG are both the largest, and those of the Mg-based BMG are the smallest. The fracture toughness KC and the dimple structure size of the Ce-based BMG are between those of the Zr-based and the Mg-based BMG. Through analyzing the data of different fracture toughnesses of the BMGs, we find that the plastic zone width follows w = (KC/σY)2/(6π).

  16. Marine bird specimen, marine bird sighting, and other data from the NOAA Ship SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 24 July 1979 to 19 November 1982 (NODC Accession 8300058)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird specimen, marine bird sighting, and other data were collected from the NOAA Ship SURVEYOR from 24 July 1979 to 19 November 1982. Data were collected by...

  17. Temperature profiles from expendable bathythermograph (XBT) casts from NOAA Ship SURVEYOR in the North Pacific Ocean in support of the Integrated Global Ocean Services System (IGOSS) project from 1976-09-27 to 1976-10-22 (NCEI Accession 7601473)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — XBT data were collected from NOAA Ship SURVEYOR in support of the Integrated Global Ocean Services System (IGOSS) project. Data were collected by the National Ocean...

  18. Delayed XBT data from the Southern Surveyor, collected by Commonwealth Scientific Industrial Research Organization (CSIRO), and submitted to the Global Temperature-Salinity Profile Program (GTSPP), date range from 02/07/2009 - 03/14/2009 (NODC Accession 0059379)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — XBT data were collected in the Pacific Ocean aboard the Southern Surveyor from 07 February to 14 March 2009. Data were submitted by the CommonWealth Scientific...

  19. Temperature profiles from expendable bathythermograph (XBT) casts from the NOAA Ship SURVEYOR in the North Pacific Ocean in support of the Integrated Global Ocean Services System (IGOSS) project from 14 November 1986 to 23 November 1986 (NODC Accession 8600384)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — XBT data were collected from the NOAA Ship SURVEYOR in support of the Integrated Global Ocean Services System (IGOSS) project. Data were collected by the National...

  20. Marine animal sighting and census data from the NOAA Ship SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 11 May 1982 to 19 March 1983 (NODC Accession 8400150)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine animal sighting and census data were collected from the NOAA Ship SURVEYOR from 11 May 1982 to 19 March 1983. Data were collected by the Envirosphere Co. as...

  1. Marine toxic substance and other data from bottle casts from the NOAA Ship SURVEYOR as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 13 August 1980 to 21 February 1981 (NODC Accession 8100531)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine toxic substance and other data were collected from bottle casts from the NOAA Ship SURVEYOR from 13 August 1980 to 21 February 1981. Data were collected by...

  2. Physical, meteorological, and other data from surface sensors and CTD casts from the SURVEYOR and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 23 February 1981 to 30 April 1983 (NODC Accession 8300167)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, and other data were collected from surface sensors and CTD casts from the SURVEYOR and other platforms from 23 February 1981 to 30 April...

  3. Zooplankton and other data from net casts in Prince William Sound from NOAA Ship SURVEYOR as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 1975-10-03 to 1975-10-10 (NCEI Accession 7601873)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton and other data were collected from net casts in Prince William Sound from the SURVEYOR from 03 October 1975 to 10 October 1975. Data were collected by...

  4. Zooplankton and other data from net casts in the Gulf of Alaska from the SURVEYOR as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 30 September 1975 to 24 October 1975 (NODC Accession 7601809)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton and other data were collected from net casts in the Gulf of Alaska from the SURVEYOR from 30 September 1975 to 24 October 1975. Data were collected by...

  5. Zooplankton and other data from net casts from NOAA Ship SURVEYOR as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 1977-06-28 to 1977-07-04 (NCEI Accession 7900066)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton and other data were collected from net casts from NOAA Ship SURVEYOR from 28 June 1977 to 04 July 1977. Data were collected by the University of Alaska,...

  6. Zooplankton and other data from net casts from NOAA Ship SURVEYOR as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 1976-03-17 to 1976-04-26 (NCEI Accession 7601628)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton and other data were collected from net casts from NOAA Ship SURVEYOR from 17 March 1976 to 26 April 1976. Data were collected by the University of Alaska...

  7. Physical, meteorological, and other data from surface sensors and CTD casts from SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 16 August 1977 to 15 September 1977 (NODC Accession 7800013)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, and other data were collected from surface sensors and CTD casts from the SURVEYOR. Data were collected by the Pacific Marine Environmental...

  8. Physical, meteorological, and other data from surface sensors, bottle casts, and CTD casts from SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 15 April 1976 to 26 April 1976 (NODC Accession 7601823)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, and other data were collected from surface sensors, bottle casts, and CTD casts from the SURVEYOR. Data were collected by the University of...

  9. Temperature, salinity and other measurements found in dataset CTD taken from the SOUTHERN SURVEYOR (VLHJ) in the Coastal S Pacific, Equatorial Pacific and other locations from 2003 to 2006 (NODC Accession 0043461)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, salinity, chemical, and other data were collected using CTD casts from the SOUTHERN SURVEYOR in the Iceland Sea and North / South Pacific Ocean. Data...

  10. Temperature and salinity profiles from surface sensors and CTD casts in the Gulf of Alaska from the SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 21 September 1975 to 22 September 1975 (NODC Accession 7601224)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profiles were collected from surface sensors and CTD casts in the Gulf of Alaska from the SURVEYOR. Data were collected by the Pacific...

  11. Physical and other data from surface sensors and CTD casts in the Gulf of Alaska from the SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 05 June 1975 to 12 June 1975 (NODC Accession 7601225)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical and other data were collected from surface sensors and CTD casts in the Gulf of Alaska from the SURVEYOR. Data were collected by the Pacific Marine...

  12. Marine animal sighting and census data from NOAA Ship SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 17 May 1975 to 13 October 1977 (NODC Accession 8000349)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine animal sighting and census data were collected from the NOAA Ship SURVEYOR from 17 May 1975 to 13 October 1977. Data were collected by the U.S. National...

  13. Marine bird sighting and other data from the SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 01 September 1976 to 02 September 1976 (NODC Accession 7800704)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the SURVEYOR as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP). Data were...

  14. Physical, meteorological, and other data from surface sensors and CTD casts from the NOAA Ship SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 15 August 1980 to 05 September 1980 (NODC Accession 8200116)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, and other data were collected from surface sensors and CTD casts from the NOAA Ship SURVEYOR from 15 August 1980 to 05 September 1980. Data...

  15. Oceanographic profile data collected aboard Atlantic Surveyor as part of project OPR-D302-KR-12 in the North Atlantic Ocean from 2012-07-05 to 2012-09-05 (NCEI Accession 0130622)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0130622 includes physical and profile data collected aboard the Atlantic Surveyor during project OPR-D302-KR-12 in the North Atlantic Ocean from...

  16. Marine mammal specimen and other data from the NOAA Ship SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 22 July 1975 to 28 August 1979 (NODC Accession 8100349)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine mammal specimen and other data were collected from the NOAA Ship SURVEYOR from 22 July 1975 to 28 August 1979. Data were collected by the University of...

  17. Marine mammal specimen and other data from the SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 10 February 1977 to 19 November 1977 (NODC Accession 7900320)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine mammal specimen and other data were collected from the SURVEYOR and other platforms from 10 February 1977 to 19 November 1977. Data were collected by the...

  18. Marine mammal specimen and other data from the SURVEYOR and other platforms as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 20 March 1977 to 02 November 1977 (NODC Accession 7900319)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine mammal specimen and other data were collected from the SURVEYOR and other platforms from 20 March 1977 to 02 November 1977. Data were collected by the Alaska...

  19. Marine bird sighting and other data from the NOAA Ship SURVEYOR as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 16 August 1980 to 05 September 1980 (NODC Accession 8100473)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine bird sighting and other data were collected from the NOAA Ship SURVEYOR from 16 August 1980 to 05 September 1980. Data were collected by the University of...

  20. Fracture resistance enhancement of layered structures by multiple cracks

    DEFF Research Database (Denmark)

    Goutianos, Stergios; Sørensen, Bent F.

    2016-01-01

    A theoretical model is developed to test if the fracture resistance of a layered structure can be increased by introducing weak layers changing the cracking mechanism. An analytical model, based on the J integral, predicts a linear dependency between the number of cracks and the steady state...... fracture resistance. A finite element cohesive zone model, containing two cracking planes for simplicity, is used to check the theoretical model and its predictions. It is shown that for a wide range of cohesive law parameters, the numerical predictions agree well quantitatively with the theoretical model....... Thus, it is possible to enhance considerably the fracture resistance of a structure by adding weak layers....

  1. Saturated Zone Colloid Transport

    Energy Technology Data Exchange (ETDEWEB)

    H. S. Viswanathan

    2004-10-07

    This scientific analysis provides retardation factors for colloids transporting in the saturated zone (SZ) and the unsaturated zone (UZ). These retardation factors represent the reversible chemical and physical filtration of colloids in the SZ. The value of the colloid retardation factor, R{sub col} is dependent on several factors, such as colloid size, colloid type, and geochemical conditions (e.g., pH, Eh, and ionic strength). These factors are folded into the distributions of R{sub col} that have been developed from field and experimental data collected under varying geochemical conditions with different colloid types and sizes. Attachment rate constants, k{sub att}, and detachment rate constants, k{sub det}, of colloids to the fracture surface have been measured for the fractured volcanics, and separate R{sub col} uncertainty distributions have been developed for attachment and detachment to clastic material and mineral grains in the alluvium. Radionuclides such as plutonium and americium sorb mostly (90 to 99 percent) irreversibly to colloids (BSC 2004 [DIRS 170025], Section 6.3.3.2). The colloid retardation factors developed in this analysis are needed to simulate the transport of radionuclides that are irreversibly sorbed onto colloids; this transport is discussed in the model report ''Site-Scale Saturated Zone Transport'' (BSC 2004 [DIRS 170036]). Although it is not exclusive to any particular radionuclide release scenario, this scientific analysis especially addresses those scenarios pertaining to evidence from waste-degradation experiments, which indicate that plutonium and americium may be irreversibly attached to colloids for the time scales of interest. A section of this report will also discuss the validity of using microspheres as analogs to colloids in some of the lab and field experiments used to obtain the colloid retardation factors. In addition, a small fraction of colloids travels with the groundwater without any significant

  2. Effect of isolated fractures on accelerated flow in unsaturated porous rock

    Science.gov (United States)

    Su, G.W.; Nimmo, J.R.; Dragila, M.I.

    2003-01-01

    Fractures that begin and end in the unsaturated zone, or isolated fractures, have been ignored in previous studies because they were generally assumed to behave as capillary barriers and remain nonconductive. We conducted a series of experiments using Berea sandstone samples to examine the physical mechanisms controlling flow in a rock containing a single isolated fracture. The input fluxes and fracture orientation were varied in these experiments. Visualization experiments using dyed water in a thin vertical slab of rock were conducted to identify flow mechanisms occurring due to the presence of the isolated fracture. Two mechanisms occurred: (1) localized flow through the rock matrix in the vicinity of the isolated fracture and (2) pooling of water at the bottom of the fracture, indicating the occurrence of film flow along the isolated fracture wall. These mechanisms were observed at fracture angles of 20 and 60 degrees from the horizontal, but not at 90 degrees. Pooling along the bottom of the fracture was observed over a wider range of input fluxes for low-angled isolated fractures compared to high-angled ones. Measurements of matrix water pressures in the samples with the 20 and 60 degree fractures also demonstrated that preferential flow occurred through the matrix in the fracture vicinity, where higher pressures occurred in the regions where faster flow was observed in the visualization experiments. The pooling length at the terminus of a 20 degree isolated fracture was measured as a function of input flux. Calculations of the film flow rate along the fracture were made using these measurements and indicated that up to 22% of the flow occurred as film flow. These experiments, apparently the first to consider isolated fractures, demonstrate that such features can accelerate flow through the unsaturated zone and should be considered when developing conceptual models.

  3. Deuterium distributions on delayed hydride crack fracture surfaces of Zr-2.5Nb

    Energy Technology Data Exchange (ETDEWEB)

    Laursen, T. [Queen`s Univ., Kingston, ON (Canada); Palmer, G.R. [Queen`s Univ., Kingston, ON (Canada); Shek, G.K. [Ontario Hydro Technologies, Toronto, Ontario (Canada)

    1995-02-01

    Delayed hydride cracking (DHC) fracture surfaces on unirradiated Zr-2.5Nb pressure tube material have been characterized by nuclear reaction analysis (NRA). Although the fracture surface is rough and oxidized, NRA was able to detect the deuteride on the surface and to determine an average deuteride thickness. This thickness, which represents half of the fractured hydride thickness, was 1 {mu}m in the case of a specimen containing an average D concentration of 68 wppm and fractured at 517-525 K. On a specimen selected for its large ligament zones, D distributions on a tunnelled DHC crack was compared to those on the adjacent ligament zones. The hydriding of these ligament zones - in spite of their different appearance - is consistent with fracture by a DHC mechanism. ((orig.))

  4. [Fracture endoprosthesis of distal humerus fractures].

    Science.gov (United States)

    Müller, L P; Wegmann, K; Burkhart, K J

    2013-08-01

    The treatment of choice for fractures of the distal humerus is double plate osteosynthesis. Due to anatomical preshaped angle stable plates the primary stability and management of soft tissues has been improved. However, osteoporotic comminuted fractures in the elderly are often not amenable to stable osteosynthesis and total elbow arthroplasty has been established as an alternative therapy. Although complication rates have been reduced, complications of total elbow arthroplasty are still much more frequent than in total hip replacement. Furthermore, patients are advised not to exceed a weight bearing of 5 kg. Therefore, the indications for elbow arthroplasty must be evaluated very strictly and should be reserved for comminuted distal humeral fractures in the elderly with poor bone quality that are not amenable to stable osteosynthesis or for simple fractures in cases of preexisting symptomatic osteoarthritis. This article introduces and discusses modern concepts of elbow arthroplasty, such as modular convertible prosthesis systems, hemiarthroplasty and radial head replacement in total elbow arthroplasty.

  5. Interference of Co-Amplified Nuclear Mitochondrial DNA Sequences on the Determination of Human mtDNA Heteroplasmy by Using the SURVEYOR Nuclease and the WAVE HS System

    OpenAIRE

    Hsiu-Chuan Yen; Shiue-Li Li; Wei-Chien Hsu; Petrus Tang

    2014-01-01

    High-sensitivity and high-throughput mutation detection techniques are useful for screening the homoplasmy or heteroplasmy status of mitochondrial DNA (mtDNA), but might be susceptible to interference from nuclear mitochondrial DNA sequences (NUMTs) co-amplified during polymerase chain reaction (PCR). In this study, we first evaluated the platform of SURVEYOR Nuclease digestion of heteroduplexed DNA followed by the detection of cleaved DNA by using the WAVE HS System (SN/WAVE-HS) for detectin...

  6. Quantitative geometric description of fracture systems in an andesite lava flow using terrestrial laser scanner data

    Science.gov (United States)

    Massiot, Cécile; Nicol, Andrew; Townend, John; McNamara, David D.; Garcia-Sellés, David; Conway, Chris E.; Archibald, Garth

    2017-07-01

    Permeability hosted in andesitic lava flows is dominantly controlled by fracture systems, with geometries that are often poorly constrained. This paper explores the fracture system geometry of an andesitic lava flow formed during its emplacement and cooling over gentle paleo-topography, on the active Ruapehu volcano, New Zealand. The fracture system comprises column-forming and platy fractures within the blocky interior of the lava flow, bounded by autobreccias partially observed at the base and top of the outcrop. We use a terrestrial laser scanner (TLS) dataset to extract column-forming fractures directly from the point-cloud shape over an outcrop area of ∼3090 m2. Fracture processing is validated using manual scanlines and high-resolution panoramic photographs. Column-forming fractures are either steeply or gently dipping with no preferred strike orientation. Geometric analysis of fractures derived from the TLS, in combination with virtual scanlines and trace maps, reveals that: (1) steeply dipping column-forming fracture lengths follow a scale-dependent exponential or log-normal distribution rather than a scale-independent power-law; (2) fracture intensities (combining density and size) vary throughout the blocky zone but have similar mean values up and along the lava flow; and (3) the areal fracture intensity is higher in the autobreccia than in the blocky zone. The inter-connected fracture network has a connected porosity of ∼0.5 % that promote fluid flow vertically and laterally within the blocky zone, and is partially connected to the autobreccias. Autobreccias may act either as lateral permeability connections or barriers in reservoirs, depending on burial and alteration history. A discrete fracture network model generated from these geometrical parameters yields a highly connected fracture network, consistent with outcrop observations.

  7. Fractures and Rock Mechanics, Phase 1

    DEFF Research Database (Denmark)

    Havmøller, Ole; Krogsbøll, Anette

    1997-01-01

    The main objectives of the project are to combine geological description of fractures, chalk types and rock mechanical properties, and to investigate whether the chosen outcrops can be used as analogues to reservoir chalks. Five chalk types, representing two outcrop localities: Stevns and Hillers......The main objectives of the project are to combine geological description of fractures, chalk types and rock mechanical properties, and to investigate whether the chosen outcrops can be used as analogues to reservoir chalks. Five chalk types, representing two outcrop localities: Stevns...... and Hillerslev, and three reservoir zones: Tyra Maastrictian, Valhall Tor and Valhall Hod are investigated. Different test types are applied in small and large scale in order to investigate the influence on stiffness and strength from natural and induced fractures, stylolites, bedding planes and healed fractures....... The main conclusions are: that Hillerslev and Stevns can be regarded as close analogues to the Valhall Tor formation, but neither to Valhall Hod nor to Tyra formations; and that compressive strength is reduced by initial fractures, whereas stifness seems to be unaffected; and that large test specimens have...

  8. Feedhorn-coupled Bolometer Detectors at 40 GHz Implemented on the Cosmology Large Angular Scale Surveyor (CLASS)

    Science.gov (United States)

    Chuss, David T.; Ali, A.; Appel, J. W.; Bennett, C. L.; Colazo, F.; Crowe, E.; Denis, K.; Eimer, J.; Essinger-Hileman, T.; Marriage, T.; Moseley, S. H.; Rostem, K.; Stevenson, T.; Towner, D.; U-Yen, K.; Wollack, E.; Zeng, L.

    2014-01-01

    We have designed, produced, and tested 40 GHz feedhorn-coupled transition-edge sensor (TES) detectors using microstrip circuits on monocrystalline silicon dielectric substrates. Symmetric planar orthomode transducers (OMTs) couple two independent orthogonal linear polarization modes from feedhorns onto planar transmission lines over a broad (60 %) bandwidth. The 33-43 GHz band is defined by a combination of on-chip planar filtering and effective integrated shielding of stray light (blue leaks). The integrated stray light control is achieved over a frequency range of > 10:1. The monocrystalline silicon substrate provides a highly uniform dielectric constant that results in reliable circuit uniformity and performance. In addition, the monocrystalline silicon enables high efficiency due to its extremely low loss. The efficiency of the devices, including all integrated filtering, has been measured to be ~90 % for each polarization. The Cosmology Large Angular Scale Surveyor (CLASS) cosmic microwave background B-mode experiment is employing a 36-element focal plane of these detectors, along with similar detectors at higher frequencies, to map a large fraction of the sky.

  9. A triple-continuum approach for modeling flow and transportprocesses in fractured rock

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Yu-Shu; Liu, H.H.; Bodvarsson, G.S; Zellmer, K .E.

    2001-08-31

    This paper presents a triple-continuum conceptual model forsimulating flow and transport processes in fractured rock. Field datacollected from the unsaturated zone of Yucca Mountain, a repository siteof high-level nuclear waste, show a large number of small-scalefractures. The effect of these small fractures has not been considered inprevious modeling investigations within the context of a continuumapproach. A new triple-continuum model (consisting of matrix,small-fracture, and large-fracture continua) has been developed toinvestigate the effect of these small fractures. This paper derives themodel formulation and discusses the basic triple-continuum behavior offlow and transport processes under different conditions, using bothanalytical solutions and numerical approaches. The simulation resultsfrom the site-scale model of the unsaturated zone of Yucca Mountainindicate that these small fractures may have an important effect onradionuclide transport within the mountain

  10. Design and Implementation of Energized Fracture Treatment in Tight Gas Sands

    Energy Technology Data Exchange (ETDEWEB)

    Mukul Sharma; Kyle Friehauf

    2009-12-31

    Hydraulic fracturing is essential for producing gas and oil at an economic rate from low permeability sands. Most fracturing treatments use water and polymers with a gelling agent as a fracturing fluid. The water is held in the small pore spaces by capillary pressure and is not recovered when drawdown pressures are low. The un-recovered water leaves a water saturated zone around the fracture face that stops the flow of gas into the fracture. This is a particularly acute problem in low permeability formations where capillary pressures are high. Depletion (lower reservoir pressures) causes a limitation on the drawdown pressure that can be applied. A hydraulic fracturing process can be energized by the addition of a compressible, sometimes soluble, gas phase into the treatment fluid. When the well is produced, the energized fluid expands and gas comes out of solution. Energizing the fluid creates high gas saturation in the invaded zone, thereby facilitating gas flowback. A new compositional hydraulic fracturing model has been created (EFRAC). This is the first model to include changes in composition, temperature, and phase behavior of the fluid inside the fracture. An equation of state is used to evaluate the phase behavior of the fluid. These compositional effects are coupled with the fluid rheology, proppant transport, and mechanics of fracture growth to create a general model for fracture creation when energized fluids are used. In addition to the fracture propagation model, we have also introduced another new model for hydraulically fractured well productivity. This is the first and only model that takes into account both finite fracture conductivity and damage in the invaded zone in a simple analytical way. EFRAC was successfully used to simulate several fracture treatments in a gas field in South Texas. Based on production estimates, energized fluids may be required when drawdown pressures are smaller than the capillary forces in the formation. For this field

  11. Jaw fractures in children.

    Science.gov (United States)

    Kotilainen, R; Kärjä, J; Kullaa-Mikkonen, A

    1990-03-01

    From a total of 350 jaw fractures treated in 1980-1984 at Kuopio University Central Hospital, 20% were in children. These injuries were evaluated retrospectively regarding age, sex, incidence and etiology. Forty-five of the patients were boys and 25 girls. The frequency of maxillary and mandibular fractures in 70 young patients was 28.6%. The most common type of bone fractures was fracture of the alveolar process, which was prevalent in persons with mixed dentition. Before the age of 7 years, falls from height were the common causes of jaw fractures. The major cause of the jaw fractures in children from 7 to 15 years old was road accidents (47.1%), especially in boys. Most of these were cycling accidents, only a few patients were victims of automobile accidents. In addition, about one third (25.7%) of the patients were treated in the hospital because of multiple injuries to other organs.

  12. Growing skull fracture

    Directory of Open Access Journals (Sweden)

    Mihajlović Miljan H.

    2006-01-01

    Full Text Available Background. Growing skull fracture or craniocerebral erosion is a rare complication of linear skull fracture in childhood. It is characterized by progressive diastatic enlargement of the fracture line, which leads to a cranial defect, dural cleft, and cerebral herniation. It is presented as a soft pulsabile scalp swelling above the fracture, with a clear cranial defect. Case report. In this paper we presented a patient, an 8-month-old boy with the growing skull fracture revealed four weeks after the injury. After the surgical treatment, the boy was in a good general condition without the presence of neurologic impairment. Conclusion. Early recognition of craniocerebral erosion is very important. Timely detection prevents further progression of the disease and the evolution of neurological impairment. Surgery is the method of choice for treating a growing skull fracture .

  13. A new device for characterizing fracture networks and measuring groundwater and contaminant fluxes in fractured rock aquifers

    Science.gov (United States)

    Klammler, Harald; Hatfield, Kirk; Newman, Mark A.; Cho, Jaehyun; Annable, Michael D.; Parker, Beth L.; Cherry, John A.; Perminova, Irina

    2016-07-01

    This paper presents the fundamental theory and laboratory test results on a new device that is deployed in boreholes in fractured rock aquifers to characterize vertical distributions of water and contaminant fluxes, aquifer hydraulic properties, and fracture network properties (e.g., active fracture density and orientation). The device, a fractured rock passive flux meter (FRPFM), consists of an inflatable core assembled with upper and lower packers that isolate the zone of interest from vertical gradients within the borehole. The outer layer of the core consists of an elastic fabric mesh equilibrated with a visible dye which is used to provide visual indications of active fractures and measures of fracture location, orientation, groundwater flux, and the direction of that flux. Beneath the outer layer is a permeable sorbent that is preloaded with known amounts of water soluble tracers which are eluted at rates proportional to groundwater flow. This sorbent also captures target contaminants present in intercepted groundwater. The mass of contaminant sorbed is used to quantify cumulative contaminant flux; whereas, the mass fractions of resident tracers lost are used to provide measures of water flux. In this paper, the FRPFM is bench tested over a range of fracture velocities (2-20 m/day) using a single fracture flow apparatus (fracture aperture = 0.5 mm). Test results show a discoloration in visible dye corresponding to the location of the active fracture. The geometry of the discoloration can be used to discern fracture orientation as well as direction and magnitude of flow in the fracture. Average contaminant fluxes were measured within 16% and water fluxes within 25% of known imposed fluxes.

  14. Pelvic fractures and mortality.

    OpenAIRE

    K.H. Chong; DeCoster, T.; Osler, T.; Robinson, B.

    1997-01-01

    A retrospective study of all patients (N = 343) with pelvic fractures admitted to our trauma service was conducted to evaluate the impact of pelvic fractures on mortality. All patients sustained additional injuries with an average Injury Severity Score (ISS) of twenty. Thirty-six patients died. This group had more severe pelvic fractures as graded by the Tile classification as well as a greater number and severity of associated injuries. Six patients died as a direct result of pelvic hemorrha...

  15. Oblique Axis Body Fracture

    DEFF Research Database (Denmark)

    Takai, Hirokazu; Konstantinidis, Lukas; Schmal, Hagen;

    2016-01-01

    was uneventful. Conclusions. Oblique type axis body fractures resemble a highly unstable subtype of Anderson type III fractures with the potential of severe secondary deformity following conservative treatment, irrespective of initial grade of displacement. The authors therefore warrant a high index of suspicion......Purpose. Anderson type III odontoid fractures have traditionally been considered stable and treated conservatively. However, unstable cases with unfavorable results following conservative treatment have been reported. Methods. We present the cases of two patients who sustained minimally displaced...

  16. Comparison of fracture properties of cellulose nanopaper, printing paper and buckypaper

    DEFF Research Database (Denmark)

    Mao, Rui; Goutianos, Stergios; Tu, Wei-Chen

    2017-01-01

    -fibre bonding. The aim of this paper is to investigate the fracture properties of cellulose nanopaper using double edge notch tensile tests on samples with different notch lengths. It was found that strength is insensitive to notch length. A cohesive zone model was used to describe the fracture behaviour...

  17. Determination of density pattern of fracture in Asmari Formation in Marun oilfield

    Directory of Open Access Journals (Sweden)

    Kheyrollah Noraeinezhad

    2015-05-01

    Full Text Available Marun oilfield is located in the middle part of Dezful Embayment and is situated along the Aghajari, Ahvaz and Ramin anticline. Given the important role of fracture characteristics for improving production, so the aim of this research is to investigate the density pattern of fracture in Asmari formation in Marun oilfield. For this purpose, results of image log, core data, graphic well log, methods of inscribed circle analysis and curvature changes geometry of anticline were analyzed. Asmari formation is the main reservoir rock in Marun oilfield that divided into five zones. Limestone and dolomite are the main lithology of zones 1, 2 and 3 which has a high density of fractures (especially in zones with 90% dolomite. Also there is less fracture density (micro fracture in the 4 and 5 Asmari zone due to an increase of shale and marl layers and due to less break ablity has a less distribution of fractures. The result show that there are a good conformity existed between the results of inscribed circle analysis, image log, core data, curvature and the presence of fractures in Marun anticline. The data indicate that highest density of fracture density concentrates in the southern limb in the central region of anticline and also in the north limb in the northeast region of the anticline. So, finally using these parameters, it is recommended that further development and production wells be drilled in the north eastern part of the oil filed as well as center part of southern flank of the anticline.

  18. Discrete fracture network for the Forsmark site

    Energy Technology Data Exchange (ETDEWEB)

    Darcel, C. [Itasca Consultants, Ecully (France); Davy, P.; Bour, O.; Dreuzy, J.R. de [Geosciences, Rennes (France)

    2006-08-15

    depth (based on boreholes KFM02A, KFM05A, HFM04 and HFM05) and outcrop DFN models. The main conclusions drawn from the consistency analysis are the following: There exists an important sub horizontal fracturing that occurs close to surface, which makes outcrop fracturing different, in term of density, from the fracturing observed in deep geological units from boreholes. The difference between surface and deep units does not exist for fractures dipping more than 30-40 deg. The rock units are remarkably consistent with outcrops for dips larger than 30-40 deg, and for Model A (a{sub 3d}=3.5). Model B tends to predict larger fracture densities in outcrops than in rock units defined in boreholes (in the dip range of 30-40 deg). There is no equivalence, in the outcrops, of the Deformation Zones, identified at depth. The best-fitting model is defined for l{sub min} (the smallest fracture diameter consistent with the power law model; l{sub min}=2r{sub 0} with r{sub 0} the location parameter) smaller than the borehole diameter. With this method, it is not possible to say more about l{sub min}. Models that consider larger values of l{sub min} do not ensure the consistency between outcrops and boreholes. The shear zones, as well as the lineaments, may belong to a different global scaling model than rock units. Further investigations and more data are necessary to characterize this additional GSM. Along the project, the issue of DFN model and of the fracture definition consistency across scales is often raised. It should be further investigated, together with a more complete description of the model variability.

  19. [(Impending) pathological fracture].

    Science.gov (United States)

    Sutter, P M; Regazzoni, P

    2002-01-01

    Pathological fractures will be encountered in increasing frequency due to more patients with cancer, surviving a longer period. The skeleton is the third most frequent localization for metastases. Breast cancer is still the most common primary tumor, but bone metastases from lung cancer seem to be diagnosed more and more. Despite of finding metastases most often in the spinal column, fractures are seen mostly at the femoral site. A pathological fracture and, in almost all cases, an impending fracture are absolute indication for operation. An exact definition of an "impending fracture" is still lacking; it is widely accepted, that 50 per cent of bone mass must be destroyed before visualization in X-ray is possible, thus defining an impending fracture. The score system by Mirels estimates the fracture risk by means of four parameters (localization, per cent of destructed bone mass, type of metastasis, pain). Improving quality of life, relieving pain, preferably with a single operation and a short length of stay are the goals of (operative) treatment. For fractures of the proximal femur, prosthetic replacement, for fractures of the subtrochanteric region or the shaft, intramedullary nails are recommended. Postoperative radiation therapy possibly avoids tumor progression. In patient with a good long term prognosis, tumor should be removed locally aggressive.

  20. Fracture mechanics safety approaches

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E.; Schuler, X.; Eisele, U. [Materials Testing Inst. (MPA), Univ. of Stuttgart (Germany)

    2004-07-01

    Component integrity assessments require the knowledge of reliable fracture toughness parameters characterising the initiation of the failure process in the whole relevant temperature range. From a large number of fracture mechanics tests a statistically based procedure was derived allowing to quantify the initiation of fracture toughness as a function of temperature as a closed function as well as the temperature dependence of the cleavage instability parameters. Alternatively to the direct experimental determination one also can use a correlation between fracture toughness and notch impact energy. (orig.)

  1. Scaphoid fractures in children

    Directory of Open Access Journals (Sweden)

    Gajdobranski Đorđe

    2014-01-01

    Full Text Available Introduction. Scaphoid fractures are rare in childhood. Diagnosis is very difficult to establish because carpal bones are not fully ossified. In suspected cases comparative or delayed radiography is used, as well as computerized tomography, magnetic resonance imaging, ultrasound and bone scintigraphy. Majority of scaphoid fractures are treated conservatively with good results. In case of delayed fracture healing various types of treatment are available. Objective. To determine the mechanism of injury, clinical healing process, types and outcome of treatment of scaphoid fractures in children. Methods. We retrospectively analyzed patients with traumatic closed fracture of the scaphoid bone over a ten-year period (2002-2011. The outcome of the treatment of “acute” scaphoid fracture was evaluated using the Mayo Wrist Score. Results. There were in total 34 patients, of mean age 13.8 years, with traumatic closed fracture of the scaphoid bone, whose bone growth was not finished yet. Most common injury mechanism was fall on outstretched arm - 76% of patients. During the examined period 31 children with “acute” fracture underwent conservative treatment, with average immobilization period of 51 days. Six patients were lost to follow-up. In the remaining 25 patients, after completed rehabilitation, functional results determined by the Mayo Wrist Score were excellent. Conclusion. Conservative therapy of “acute” scaphoid fractures is an acceptable treatment option for pediatric patients with excellent functional results.

  2. Atraumatic First Rib Fracture

    Directory of Open Access Journals (Sweden)

    Koray Aydogdu

    2014-12-01

    Full Text Available Rib fractures are usually seen after a trauma, while atraumatic spontaneous rib fractures are quite rare. A first rib fracture identified in our 17 years old female patient who had not a history of trauma except lifting a heavy weight was examined in details in terms of the potential complications and followed-up for a long time. We presented our experience on this case with atraumatic first rib fracture that has different views for the etiology in light of the literature.

  3. Fracture of the styloid process associated with the mandible fracture

    Directory of Open Access Journals (Sweden)

    K N Dubey

    2013-01-01

    Full Text Available Fracture of the styloid process (SP of temporal bone is an uncommon injuries. Fracture of the SP can be associated with the facial injuries including mandible fracture. However, injury to the SP may be concealed and missed diagnosis may lead to the improper or various unnecessary treatments. A rare case of SP fracture associated with the ipsilateral mandibular fracture and also the diagnostic and management considerations of the SP fracture are discussed.

  4. Hydrologic Mechanisms Governing Fluid Flow in a Partially Saturated, Fractured, Porous Medium

    Science.gov (United States)

    Wang, J. S. Y.; Narasimhan, T. N.

    1985-12-01

    In contrast to the saturated zone within which fluid moves rapidly along fractures, the fractures (with apertures large relative to the size of matrix pores) will desaturate first during the drainage process, and the bulk of fluid flow would be through interconnected pores in the matrix. Within a partially drained fracture, the presence of a relatively continuous air phase will produce practically an infinite resistance to liquid flow in the direction parallel to the fracture. The residual liquid will be held by capillary force, in regions around fracture contact areas where the apertures are small. Normal to the fracture surfaces, the drained portion of the fractures will reduce the effective area for liquid flow from one matrix block to another matrix block. A general statistical theory is constructed for flow along the fracture and for flow between the matrix blocks to the fractures under partially saturated conditions. Results are obtained from an aperture distribution model for fracture saturation, hydraulic conductivity, and effective matrix-fracture flow areas as functions of pressure. The effects of distortion of flow paths by the air pockets are taken into account by a phase-separation constriction factor in a generalized cubic law for fracture flow under a partially saturated condition. The reduction of matrix-fracture flow area is taken into account by summing the aperture distribution function to a saturation cutoff aperture, which is inversely proportional to the suction head. Drainage from a column of fractured tuff is simulated using available parameters for the densely welded tuff of the Topopah Spring Member at Yucca Mountain, southern Nevada. The column is bounded by discrete vertical fractures and dissected by horizontal fractures with the fracture spacings determined by the frequencies and orientations of fractured cores. The fraction of fracture surfaces with coatings is assumed to correspond to the fraction of in situ fracture contact area

  5. EVALUATION OF ENHANCED VOC REMOVAL WITH SOIL FRACTURING IN THE SRS UPLAND UNIT

    Energy Technology Data Exchange (ETDEWEB)

    Riha, B

    2005-10-31

    The Environmental Restoration Technology Section (ERTS) of the Savannah River National Laboratory (SRNL) conducted pilot scale testing to evaluate the effectiveness of using hydraulic fracturing as a means to improve soil vapor extraction (SVE) system performance. Laboratory and field research has shown that significant amounts of solvents can be entrapped in low permeability zones by capillary forces and removal by SVE can be severely limited due to low flow rates, mass transfer resistance of the hydrophobic compounds by trapped interparticle water, and diffusion resistance. Introducing sand-filled fractures into these tight zones improves the performance of SVE by (1) increasing the overall permeability of the formation and thereby increasing SVE flow rates, (2) shortening diffusion pathways, and (3) increasing air permeability by improving pore water removal. The synergistic effect of the fracture well completion methods, fracture and flow geometry, and pore water removal appears to increase the rate of solvent mass removal over that of increasing flow rate alone. A field test was conducted where a conventional well in the SRS Upland Unit was tested before and after hydraulic fracturing. ERTS teamed with Clemson University through the South Carolina University and Education Foundation (SCUREF) program utilizing their expertise in fracturing and fracture modeling. The goals of the fracturing pilot testing were to evaluate the following: (1) The effect of hydraulic fractures on the performance of a conventional well. This was the most reliable way to remove the effects of spatial variations in permeability and contaminant distribution on relative well performance. It also provided data on the option of improving the performance of existing wells using hydraulic fractures. (2) The relative performance of a conventional SVE well and isolated hydraulic fractures. This was the most reliable indicator of the performance of hydraulic fractures that could be created in a

  6. Lithostratigraphic contact – a significant site for hydrogeological investigation in crystalline fractured-rock terrains

    Indian Academy of Sciences (India)

    Tapas Acharya; Rajesh Prasad

    2017-02-01

    Estimating the hydrogeologic control of fractured aquifers in hard crystalline and metamorphosed rocks is challenging due to complexity in the development of secondary porosity. The present study in the Precambrian metamorphic terrain in and around the Balarampur of Purulia district, West Bengal, India, aims to estimate the hydrogeologic significance of lithostratigraphic contacts using fracture characteristics obtained from surface bedrock exposures supported by hydrological data from the existing dugwells. This study involves the domain-wise analysis of the frequencies of fractures that control the fractureporosity.The domain-wise study reveals higher fracture-frequencies adjacent to the lithostratigraphic contacts. The concurrence of lithostratigraphic contacts with the occurrences of high-discharging wells and also with the deep weathered zone in low-lying areas is clearly established, thus assigning the lithostratigraphic contact as hydrogeologically significant. An increase in frequencies of the fractures within the ‘influence zone’ of the lithocontact, is clearly visible. Among those fractures, particularly, which make the angle greater than the ‘limiting angle’ with the lithocontact are characterised by increased frequencies. However, brittle rocks like quartz biotite granite gneisses, phyllite and epidiorite show high porosity of fracture, within the ‘influence zone’ of the lithostratigraphic contact. Enhanced deepening of the weathered-zone at lower topographic region may perhaps be a plausible explanation for this increased fracture-porosity at lithocontact to assign it as a hydrogeologically significant transmissive zone within fractured rocks.

  7. Origin of Permeability and Structure of Flows in Fractured Media

    Science.gov (United States)

    De Dreuzy, J.; Darcel, C.; Davy, P.; Erhel, J.; Le Goc, R.; Maillot, J.; Meheust, Y.; Pichot, G.; Poirriez, B.

    2013-12-01

    After more than three decades of research, flows in fractured media have been shown to result from multi-scale geological structures. Flows result non-exclusively from the damage zone of the large faults, from the percolation within denser networks of smaller fractures, from the aperture heterogeneity within the fracture planes and from some remaining permeability within the matrix. While the effect of each of these causes has been studied independently, global assessments of the main determinisms is still needed. We propose a general approach to determine the geological structures responsible for flows, their permeability and their organization based on field data and numerical modeling [de Dreuzy et al., 2012b]. Multi-scale synthetic networks are reconstructed from field data and simplified mechanical modeling [Davy et al., 2010]. High-performance numerical methods are developed to comply with the specificities of the geometry and physical properties of the fractured media [Pichot et al., 2010; Pichot et al., 2012]. And, based on a large Monte-Carlo sampling, we determine the key determinisms of fractured permeability and flows (Figure). We illustrate our approach on the respective influence of fracture apertures and fracture correlation patterns at large scale. We show the potential role of fracture intersections, so far overlooked between the fracture and the network scales. We also demonstrate how fracture correlations reduce the bulk fracture permeability. Using this analysis, we highlight the need for more specific in-situ characterization of fracture flow structures. Fracture modeling and characterization are necessary to meet the new requirements of a growing number of applications where fractures appear both as potential advantages to enhance permeability and drawbacks for safety, e.g. in energy storage, stimulated geothermal energy and non-conventional gas productions. References Davy, P., et al. (2010), A likely universal model of fracture scaling and

  8. Modifications of Carbonate Fracture Hydrodynamic Properties by CO 2 -Acidified Brine Flow

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Hang; Ellis, Brian R.; Peters, Catherine A.; Fitts, Jeffrey P.; Crandall, Dustin; Bromhal, Grant S.

    2013-08-15

    Acidic reactive flow in fractures is relevant in subsurface activities such as CO{sub 2} geological storage and hydraulic fracturing. Understanding reaction-induced changes in fracture hydrodynamic properties is essential for predicting subsurface flows such as leakage, injectability, and fluid production. In this study, x-ray computed tomography scans of a fractured carbonate caprock were used to create three dimensional reconstructions of the fracture before and after reaction with CO{sub 2}-acidified brine (Ellis et al., 2011, Greenhouse Gases: Sci. Technol., 1:248-260). As expected, mechanical apertures were found to increase substantially, doubling and even tripling in some places. However, the surface geometry evolved in complex ways including ‘comb-tooth’ structures created from preferential dissolution of calcite in transverse sedimentary bands, and the creation of degraded zones, i.e. porous calcite-depleted areas on reacted fracture surfaces. These geometric alterations resulted in increased fracture roughness, as measured by surface Z{sub 2} parameters and fractal dimensions D{sub f}. Computational fluid dynamics (CFD) simulations were conducted to quantify the changes in hydraulic aperture, fracture transmissivity and permeability. The results show that the effective hydraulic apertures are smaller than the mechanical apertures, and the changes in hydraulic apertures are nonlinear. Overestimation of flow rate by a factor of two or more would be introduced if fracture hydrodynamic properties were based on mechanical apertures, or if hydraulic aperture is assumed to change proportionally with mechanical aperture. The differences can be attributed, in part, to the increase in roughness after reaction, and is likely affected by contiguous transverse sedimentary features. Hydraulic apertures estimated by the 1D statistical model and 2D local cubic law (LCL) model are consistently larger than those calculated from the CFD simulations. In addition, a novel

  9. Modifications of Carbonate Fracture Hydrodynamic Properties by CO{sub 2}-Acidified Brine Flow

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Hang; Ellis, Brian R.; Peters, Catherine A.; Fitts, Jeffrey P.; Crandall, Dustin; Bromhal, Grant S.

    2013-08-01

    Acidic reactive flow in fractures is relevant in subsurface activities such as CO{sub 2} geological storage and hydraulic fracturing. Understanding reaction-induced changes in fracture hydrodynamic properties is essential for predicting subsurface flows such as leakage, injectability, and fluid production. In this study, x-ray computed tomography scans of a fractured carbonate caprock were used to create three dimensional reconstructions of the fracture before and after reaction with CO{sub 2}-acidified brine (Ellis et al., 2011, Greenhouse Gases: Sci. Technol., 1:248-260). As expected, mechanical apertures were found to increase substantially, doubling and even tripling in some places. However, the surface geometry evolved in complex ways including ‘comb-tooth’ structures created from preferential dissolution of calcite in transverse sedimentary bands, and the creation of degraded zones, i.e. porous calcite-depleted areas on reacted fracture surfaces. These geometric alterations resulted in increased fracture roughness, as measured by surface Z{sub 2} parameters and fractal dimensions D{sub f}. Computational fluid dynamics (CFD) simulations were conducted to quantify the changes in hydraulic aperture, fracture transmissivity and permeability. The results show that the effective hydraulic apertures are smaller than the mechanical apertures, and the changes in hydraulic apertures are nonlinear. Overestimation of flow rate by a factor of two or more would be introduced if fracture hydrodynamic properties were based on mechanical apertures, or if hydraulic aperture is assumed to change proportionally with mechanical aperture. The differences can be attributed, in part, to the increase in roughness after reaction, and is likely affected by contiguous transverse sedimentary features. Hydraulic apertures estimated by the 1D statistical model and 2D local cubic law (LCL) model are consistently larger than those calculated from the CFD simulations. In addition, a novel

  10. Hip Fractures among Older Adults

    Science.gov (United States)

    ... online training for health care providers. Learn More Hip Fractures Among Older Adults Recommend on Facebook Tweet Share ... get older. What You Can Do to Prevent Hip Fractures You can prevent hip fractures by taking steps ...

  11. 3D finite element analysis on crack-tip plastic zone

    African Journals Online (AJOL)

    user

    International Journal of Engineering, Science and Technology ... 1* Research Centre, Department of Mechanical Engineering, SDM College of ... studies related to crack-tip plastic zones are of fundamental importance for assessing fracture ...

  12. Zoning Districts, Zoning, Published in 2002, Freelance.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Zoning Districts dataset, was produced all or in part from Hardcopy Maps information as of 2002. It is described as 'Zoning'. Data by this publisher are often...

  13. Open segmental fractures of the tibia treated by external fixation

    Directory of Open Access Journals (Sweden)

    Golubović Ivan

    2012-01-01

    Full Text Available Introduction. Open segmental fractures of the tibia are rare but severe injuries. In these fractures the wide zone of injury (damage of all structures of the lower leg creates very unsuitable biological conditions for healing of the fracture. Objective. The aim of our work was to present the results of treatment of patients with segmental open fractures of the tibia treated by external fixation. Methods. We analyzed treatment results of 21 patients with open segmental tibial fractures who were treated using the method of external fixation at the Clinical Center Niš from January 1, 1995 to July 31, 2010. The average age of the patients was 53 years; the youngest patient was 27 years and the oldest one 80 years. According to the Gustilo open fracture classification, there were 3 (14.3% type I, 6 (28.6% type II, 8 (38.1% type IIIA, and 4 (19.0% type IIIB. All the patients were treated by a unilateral type Mitković external fixator by Traffix Company. Results. Union was attained in 16 (76.2% fractures without severe complications (pseudoarthrosis, chronic osteitis and angular deformities of over 10 degrees. Among severe complications associated with open segmental tibial fractures, in two cases we registered septic pseudoarthrosis, in one aseptic pseudoarthrosis and in two large angular deformities of the tibia after union, with a valgus of over 10 degrees and extremity shortening of over 2 cm which required additional surgery. Conclusion. External fixation by the use of Mitković external fixator is one of the methods of choice in the treatment of open segmental tibial fractures, which incorporated with antibiotic therapy provides good biomehanical conditions for segmental fracture healing that enables good stability of the segmental tibial fracture and decreases the risk of deep infections. [Projekat Ministarstva nauke Republike Srbije, br. 41017: Virtuelni koštano­zglobni sistem čoveka i njegova primena u pretkliničkoj i kliničkoj praksi

  14. The Reliability of Classifications of Proximal Femoral Fractures with 3-Dimensional Computed Tomography: The New Concept of Comprehensive Classification

    Directory of Open Access Journals (Sweden)

    Hiroaki Kijima

    2014-01-01

    Full Text Available The reliability of proximal femoral fracture classifications using 3DCT was evaluated, and a comprehensive “area classification” was developed. Eleven orthopedists (5–26 years from graduation classified 27 proximal femoral fractures at one hospital from June 2013 to July 2014 based on preoperative images. Various classifications were compared to “area classification.” In “area classification,” the proximal femur is divided into 4 areas with 3 boundary lines: Line-1 is the center of the neck, Line-2 is the border between the neck and the trochanteric zone, and Line-3 links the inferior borders of the greater and lesser trochanters. A fracture only in the first area was classified as a pure first area fracture; one in the first and second area was classified as a 1-2 type fracture. In the same way, fractures were classified as pure 2, 3-4, 1-2-3, and so on. “Area classification” reliability was highest when orthopedists with varying experience classified proximal femoral fractures using 3DCT. Other classifications cannot classify proximal femoral fractures if they exceed each classification’s particular zones. However, fractures that exceed the target zones are “dangerous” fractures. “Area classification” can classify such fractures, and it is therefore useful for selecting osteosynthesis methods.

  15. Pneumothorax complicating isolated clavicle fracture.

    Science.gov (United States)

    Hani, Redouane; Ennaciri, Badr; Jeddi, Idriss; El Bardouni, Ahmed; Mahfoud, Mustapha; Berrada, Mohamed Saleh

    2015-01-01

    Isolated clavicle fractures are among the commonest of traumatic fractures in the emergency department. Complications of isolated clavicle fractures are rare. Pneumothorax has been described as a complication of a fractured clavicle only rarely in English literature. In all the reported cases, the pneumothorax was treated by a thoracostomy and the clavicle fracture was treated conservatively. In our case, the pneumothorax required a chest drain insertion and the clavicle fracture was treated surgically with good result.

  16. Ray-tracing critical-angle transmission gratings for the X-ray Surveyor and Explorer-size missions

    Science.gov (United States)

    Günther, Hans M.; Bautz, Marshall W.; Heilmann, Ralf K.; Huenemoerder, David P.; Marshall, Herman L.; Nowak, Michael A.; Schulz, Norbert S.

    2016-07-01

    We study a critical angle transmission (CAT) grating spectrograph that delivers a spectral resolution significantly above any X-ray spectrograph ever own. This new technology will allow us to resolve kinematic components in absorption and emission lines of galactic and extragalactic matter down to unprecedented dispersion levels. We perform ray-trace simulations to characterize the performance of the spectrograph in the context of an X-ray Surveyor or Arcus like layout (two mission concepts currently under study). Our newly developed ray-trace code is a tool suite to simulate the performance of X-ray observatories. The simulator code is written in Python, because the use of a high-level scripting language allows modifications of the simulated instrument design in very few lines of code. This is especially important in the early phase of mission development, when the performances of different configurations are contrasted. To reduce the run-time and allow for simulations of a few million photons in a few minutes on a desktop computer, the simulator code uses tabulated input (from theoretical models or laboratory measurements of samples) for grating efficiencies and mirror reflectivities. We find that the grating facet alignment tolerances to maintain at least 90% of resolving power that the spectrometer has with perfect alignment are (i) translation parallel to the optical axis below 0.5 mm, (ii) rotation around the optical axis or the groove direction below a few arcminutes, and (iii) constancy of the grating period to 1:105. Translations along and rotations around the remaining axes can be significantly larger than this without impacting the performance.

  17. Observing Magnetic and Current Profiles of the Night side and Terminator of Mars through the Mars Global Surveyor Data

    Science.gov (United States)

    Ponce, N.; Fillingim, M. O.; Fogle, A. L.

    2014-12-01

    Mars has no global magnetic field. Changes in the solar wind and interplanetary magnetic field can impact the upper atmosphere and induce currents in the ionosphere of Mars. During aerobraking maneuvers, Mars Global Surveyor (MGS) made over 1000 passes through Mars's ionosphere. During these passes, MGS measured the local magnetic field. From these measurements, we can determine the ionospheric currents. We restrict our analysis to passes where the radial component of the magnetic field is nearly zero. This restriction, along with some assumptions about the gradients in the magnetic field, allows us to estimate the horizontal ionospheric currents. Additionally, we focus on the magnetic field data acquired over regions above negligible crustal magnetic fields in order to simplify the analysis. At a maximum altitude of 250 km, the Mars map was segmented to 30 by 30 degrees east longitude and latitude for analysis. We find that on the night side, where the solar zenith angle (SZA) lies between 130 to 180 degrees, only 4% of the data (out of a total of 52 profiles) is usable for computing currents, that is the radial component of the magnetic field is nearly zero. We also find that near the terminator, where the SZA lies between 50 to 130 degrees, an average of 2% of the magnetic field profiles (out of 1905) are usable to compute currents. This implies that currents are rarely horizontal (as required by our assumptions) in these regions. The currents computed from these profiles can give us insights into how the changing solar wind and interplanetary magnetic field can affect the upper atmosphere of Mars. For example, induced currents can lead to Joule heating of the atmosphere potentially modifying the neutral dynamics.

  18. Characterization of overwintering sites of the invasive brown marmorated stink bug in natural landscapes using human surveyors and detector canines.

    Directory of Open Access Journals (Sweden)

    Doo-Hyung Lee

    Full Text Available Halyomorpha halys is an invasive species from Asia causing major economic losses in agricultural production in the mid-Atlantic region of the United States. Unlike other crop pests, H. halys is also well-known for nuisance problems in urban, suburban, and rural areas, as massive numbers of adults often invade human-made structures to overwinter inside protected environments. Research efforts have focused on populations in human-made structures while overwintering ecology of H. halys in natural landscapes is virtually unknown. We explored forested landscapes in the mid-Atlantic region to locate and characterize natural overwintering structures used by H. halys. We also evaluated the use of detector canines to locate overwintering H. halys to enhance the accuracy and efficiency of surveys. From these studies, we indentified shared characteristics of overwintering sites used by H. halys in natural landscapes. Overwintering H. halys were recovered from dry crevices in dead, standing trees with thick bark, particularly oak (Quercus spp. and locust (Robinia spp.; these characteristics were shared by 11.8% of all dead trees in surveyed landscapes. For trees with favorable characteristics, we sampled ∼20% of the total above-ground tree area and recovered 5.9 adults per tree from the trees with H. halys present. Two detector canines were successfully trained to recognize and detect the odor of adult H. halys yielding >84% accuracy in laboratory and semi-field trials. Detector canines also found overwintering H. halys under field conditions. In particular, overwintering H. halys were recovered only from dead trees that yielded positive indications from the canines and shared key tree characteristics established by human surveyors. The identified characteristics of natural overwintering sites of H. halys will serve as baseline information to establish crop economic risk levels posed by overwintering populations, and accordingly develop sustainable

  19. Surveyor Nuclease: a new strategy for a rapid identification of heteroplasmic mitochondrial DNA mutations in patients with respiratory chain defects.

    Science.gov (United States)

    Bannwarth, Sylvie; Procaccio, Vincent; Paquis-Flucklinger, Veronique

    2005-06-01

    Molecular analysis of mitochondrial DNA (mtDNA) is a critical step in diagnosis and genetic counseling of respiratory chain defects. No fast method is currently available for the identification of unknown mtDNA point mutations. We have developed a new strategy based on complete mtDNA PCR amplification followed by digestion with a mismatch-specific DNA endonuclease, Surveyor Nuclease. This enzyme, a member of the CEL nuclease family of plant DNA endonucleases, cleaves double-strand DNA at any mismatch site including base substitutions and small insertions/deletions. After digestion, cleavage products are separated and analyzed by agarose gel electrophoresis. The size of the digestion products indicates the location of the mutation, which is then confirmed and characterized by sequencing. Although this method allows the analysis of 2 kb mtDNA amplicons and the detection of multiple mutations within the same fragment, it does not lead to the identification of homoplasmic base substitutions. Homoplasmic pathogenic mutations have been described. Nevertheless, most homoplasmic base substitutions are neutral polymorphisms while deleterious mutations are typically heteroplasmic. Here, we report that this method can be used to detect mtDNA mutations such as m.3243A>G tRNA(Leu) and m.14709T>C tRNA(Glu) even when they are present at levels as low as 3% in DNA samples derived from patients with respiratory chain defects. Then, we tested five patients suffering from a mitochondrial respiratory chain defect and we identified a variant (m.16189T>C) in two of them, which was previously associated with susceptibility to diabetes and cardiomyopathy. In conclusion, this method can be effectively used to rapidly and completely screen the entire human mitochondrial genome for heteroplasmic mutations and in this context represents an important advance for the diagnosis of mitochondrial diseases.

  20. Vertebral Fracture Prediction

    DEFF Research Database (Denmark)

    2008-01-01

    Vertebral Fracture Prediction A method of processing data derived from an image of at least part of a spine is provided for estimating the risk of a future fracture in vertebraeof the spine. Position data relating to at least four neighbouring vertebrae of the spine is processed. The curvature...

  1. Radial head fracture - aftercare

    Science.gov (United States)

    ... Philadelphia, PA: Elsevier Saunders; 2015:chap 6. Prawer A. Radius and ulna fractures. In: Eiff M, Hatch R, eds. Fracture Management for Primary Care . 3rd ed. Philadelphia, PA: Elsevier Saunders; 2012:chap ... PhD, and the A.D.A.M. Editorial team. Related MedlinePlus Health ...

  2. Displaced patella fractures.

    Science.gov (United States)

    Della Rocca, Gregory J

    2013-10-01

    Displaced patella fractures often result in disruption of the extensor mechanism of the knee. An intact extensor mechanism is a requirement for unassisted gait. Therefore, operative treatment of the displaced patella fracture is generally recommended. The evaluation of the patella fracture patient includes examination of extensor mechanism integrity. Operative management of patella fractures normally includes open reduction with internal fixation, although partial patellectomy is occasionally performed, with advancement of quadriceps tendon or patellar ligament to the fracture bed. Open reduction with internal fixation has historically been performed utilizing anterior tension band wiring, although comminution of the fracture occasionally makes this fixation construct inadequate. Supplementation or replacement of the tension band wire construct with interfragmentary screws, cerclage wire or suture, and/or plate-and-screw constructs may add to the stability of the fixation construct. Arthrosis of the patellofemoral joint is very common after healing of patella fractures, and substantial functional deficits may persist long after fracture healing has occurred. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  3. THORACIC SPINE FRACTURES

    Institute of Scientific and Technical Information of China (English)

    戴力扬

    2001-01-01

    Objective. To investigate the unique characteristics and treatment of thoracic spine fractures.Methods. Severty-seven patients with thoracic spine fractures were retrospectively reviewed. Of these, therewere 37 compressior fractures, 34 fracture-dislocations, 3 burst fractures and 3 burst-dislocations. Twenty-six pa-tients had a complete lesion of the spinal cord, 14 sustained a neurologically incomplete injury, and 37 wereneurologically intact. Fifty-three patients were treated nonoperatively and 24 treated operatively.Results. All patients were followed up for 2 ~ 15 years. None of the 26 patients with a complete lesion recov-ered any significant function. Of 37 neurologically intact patients, 13 had local pain although all of them re-mained normal function. Two of 14 patients with incomplete paraplegia returned to normal, 7 recovered some func-tion and 5 did not recovered.Conclusions. E ecause of the unique anatomy and biomechanics of the thoracic spine, the classification common-ly applied to thoracolumbar fractures is not suitable for thoracic fractures. Fusion and instrumentation are indicat-ed when the fractures are unstable, while patients with incomplete lesion of the spinal cord may be the candidatesfor supplemented decompression.

  4. Veining Failure and Hydraulic Fracturing in Shales

    Science.gov (United States)

    Mighani, S.; Sondergeld, C. H.; Rai, C. S.

    2014-12-01

    During the hydraulic fracturing, the pressurized fluid creates new fractures and reactivates existing natural fractures forming a highly conductive Stimulated Reservoir Volume (SRV) around the borehole. We extend the previous work on Lyons sandstone and pyrophyllite to anisotropic shale from the Wolfcamp formation. We divide the rock anisotropy into two groups: a) conventional and b) unconventional (shaly) anisotropy. X-ray Computed Tomography (CT), compressional velocity anisotropy, and SEM analysis are used to identify three causes of anisotropy: bedding planes, clay lamination, and calcite veins. Calcite vein is a subsequently filled with calcite bonded weakly to the matrix. Velocity anisotropy and visual observations demonstrate the calcite filled veins to be mostly subparallel to the fabric direction. Brazilian tests are carried out to observe the fracture initiation and propagation under tension. High speed photography (frame rate 300,000 frame/sec) was used to capture the failure. Strain gauges and Acoustic Emission (AE) sensors recorded the deformation leading up to and during failure. SEM imaging and surface profilometry were employed to study the post-failure fracture system and failed surface topology. Fracture permeability was measured as a function of effective stress. Brazilian tests on small disks containing a centered single vein revealed the shear strength of the veins. We interpret the strain data and number, frequency, and amplitude of AE events which are correlated well with the observed fracture process zone, surface roughness, and permeability. The unpropped fracture has enhanced permeability by two orders of magnitude. The observed anisotropic tensile failure seems to have a universal trend with a minimum str