Nuclear Engineering Enrollments and Degrees Survey, 2007 Data

International Nuclear Information System (INIS)

Analysis and Evaluation, Science Education Programs

2008-01-01

The survey includes degrees granted between September 1, 2006, and August 1, 2007, and fall 2007 enrollments. Thirty-one academic programs reported having nuclear engineering programs during 2007, and data was obtained for all thirty-one

Nuclear Engineering Enrollments and Degrees Survey, 2008 Data

International Nuclear Information System (INIS)

2009-01-01

The survey includes degrees granted between September 1, 2007, and August 31, 2008, and fall 2008 enrollments. Thirty-one academic programs reported having nuclear engineering programs during 2008, and data was provided by all thirty-one programs

A Survey of Gender Biases of Freshman Students toward Engineering.

Science.gov (United States)

Schaer, Barbara; And Others

1991-01-01

A survey of 724 freshman engineering orientation students investigated the significance of 5 literature-cited barriers to women's success in engineering--sexual discrimination, financial concerns, academic comfort, career awareness, and locus of control. Significant main effects were found for gender but not ethnic group. The instrument is…

Engineers as Information Processors: A Survey of US Aerospace Engineering Faculty and Students.

Science.gov (United States)

Holland, Maurita Peterson; And Others

1991-01-01

Reports on survey results from 275 faculty and 640 students, predominantly in the aerospace engineering field, concerning their behaviors about the appropriation and dissemination of information. Indicates that, as information processors, aerospace faculty and students are "information naive." Raises questions about the efficacy of…

Results of the 2010 Survey on Teaching Chemical Reaction Engineering

Science.gov (United States)

Silverstein, David L.; Vigeant, Margot A. S.

2012-01-01

A survey of faculty teaching the chemical reaction engineering course or sequence during the 2009-2010 academic year at chemical engineering programs in the United States and Canada reveals change in terms of content, timing, and approaches to teaching. The report consists of two parts: first, a statistical and demographic characterization of the…

A Survey of Various Object Oriented Requirement Engineering Methods

OpenAIRE

Anandi Mahajan; Dr. Anurag Dixit

2013-01-01

In current years many industries have been moving to the use of object-oriented methods for the development of large scale information systems The requirement of Object Oriented approach in the development of software systems is increasing day by day. This paper is basically a survey paper on various Object-oriented requirement engineering methods. This paper contains a summary of the available Object-oriented requirement engineering methods with their relative advantages and disadvantages...

INTELLECTUAL AUTOMATION OF ENGINEERING SURVEY OF BUILDING OBJECTS

Directory of Open Access Journals (Sweden)

Galina G. Kashevarova

2017-09-01

Full Text Available The engineering survey of construction objects is characterized by nonclassical situations in setting tasks. The reasons for this are poor formalizability, complexity of the construction system, non-standard, contradictory description of the situation, the difficulty of accurately measuring controlled quantities, inaccurate performance, etc. Thus, the decision on the technical condition is associated with the solution of the problem with fuzzy initial data, approximate "linguistic" characteristics of the input parameters (for example, structural defects and with the vagueness of formulations of categories of technical condition. Due to the fact that a person is included in the process of preparing decisions, he can not help but dilute this process with a noticeable share of subjectivity. The introduction of intelligent automation in the form of expert systems in assessing the technical condition of the structures of operated buildings and structures built on the basis of knowledge as a result of summarizing expert assessments represents a transition to a new, higher-quality and cost-effective technological level for survey of construction sites. Perhaps already in the near future, the products of intellectualization of the stages of engineering survey and monitoring of construction sites will be mandatory tools of this field of activity, as an integral part of guaranteeing the reliability of the issued results.

A 2009 survey of the Australasian clinical medical physics and biomedical engineering workforce.

Science.gov (United States)

Round, W Howell

2010-06-01

A survey of the Australasian clinical medical physics and biomedical engineering workforce was carried out in 2009 following on from a similar survey in 2006. 621 positions (equivalent to 575 equivalent full time (EFT) positions) were captured by the survey. Of these 330 EFT were in radiation oncology physics, 45 EFT were in radiology physics, 42 EFT were in nuclear medicine physics, 159 EFT were in biomedical engineering and 29 EFT were attributed to other activities. The survey reviewed the experience profile, the salary levels and the number of vacant positions in the workforce for the different disciplines in each Australian state and in New Zealand. Analysis of the data shows the changes to the workforce over the preceding 3 years and identifies shortfalls in the workforce.

Brief 66 Nuclear Engineering Enrollments and Degrees Survey, 2009 Data

International Nuclear Information System (INIS)

Blair, Larry M.

2010-01-01

The survey includes degrees granted between September 1, 2008 and August 31, 2009, and fall 2009 enrollments. Thirty-two academic programs reported having nuclear engineering programs during 2009, and data was obtained from all thirty-two.

A 2012 survey of the Australasian clinical medical physics and biomedical engineering workforce.

Science.gov (United States)

Round, W H

2013-06-01

A survey of the medical physics and biomedical engineering workforce in Australia and New Zealand was carried out in 2012 following on from similar surveys in 2009 and 2006. 761 positions (equivalent to 736 equivalent full time (EFT) positions) were captured by the survey. Of these, 428 EFT were in radiation oncology physics, 63 EFT were in radiology physics, 49 EFT were in nuclear medicine physics, 150 EFT were in biomedical engineering and 46 EFT were attributed to other activities. The survey reviewed the experience profile, the salary levels and the number of vacant positions in the workforce for the different disciplines in each Australian state and in New Zealand. Analysis of the data shows the changes to the workforce over the preceding 6 years and identifies shortfalls in the workforce.

Exploring differences between average and critical engineering changes: Survey results from Denmark

DEFF Research Database (Denmark)

Langer, Stefan; Maier, Anja; Wilberg, J.

2012-01-01

, such as characterisations of changes, causes, initiators, objectives, effects, and potential strategies, and software support to anticipate and handle changes. Studying characterisations of changes, some investigate late engineering changes (e.g. [Coughlan 1992]), others describe strategies to detect avoidable and to cope...... is structured as follows: Section 2 describes in brief what motivated criticality of engineering changes as the research focus of this paper and outlines the data acquisition and analysis procedure. We present results of this study in Section 3. Section 4 summarises contributions and concludes with suggestions...

Influence of gender in choosing a career amongst engineering fields: a survey study from Turkey

Science.gov (United States)

Bucak, Seyda; Kadirgan, Neset

2011-10-01

The aim of this study is to understand the motivating factors behind students' choices in their decision-making process and also get an insight on their perception of different engineering branches. A survey was prepared and the results were evaluated amongst 1163 answers. Two major influences on student's decision in their professional choices are shown to be career services and family members. Generally, students have claimed to choose a profession based on 'finding a job' and 'being happy'. Some engineering branches such as Genetic and Bioengineering, Chemical Engineering, Environmental Engineering and Industrial Engineering, are shown to be distinctly preferred by female students, whereas mechanical, civil and electronic engineering are favourites for male students. The survey results were also compared with the distribution of male and female students in various engineering departments. This study clearly shows that certain engineering branches are perceived as more appropriate for women and are thus favoured by female students, while those perceived as more appropriate for men are favoured by male students.

Offshore petroleum engineering task force report

International Nuclear Information System (INIS)

Ruelokke, M.

1999-05-01

The Offshore Petroleum Engineering Task Force was established in July 1998 in response to concerns about Newfoundland and Labrador's share of offshore petroleum engineering activity, with the aim of determining the current capability of the local sector, the demand for such companies and individuals until the year 2010, their capability to grow over that time-frame, and requirements in order to achieve that growth. The report summarizes the analysis undertaken by the Task Force as well as the conclusions it reached and associated recommendations. Section two provides an overview of the offshore engineering activity, including its origins, structure, and key success factors, and its also provides a profile of the industry, internationally, in Canada and in Newfoundland. Section three presents an analysis of the future demand for offshore engineering in Newfoundland until 2010, based on three development scenarios. Section four based on a Consulting Engineers of Newfoundland and Labrador (CENL) survey, establishes the present offshore engineering capacity and capabilities within the province. Section five examines current education and training programs and their ability to respond to future demands. Section six summarizes the conclusions of the analysis and presents recommendations designed to facilitate and promote the development of the local offshore engineering industry. 6 figs

Environmental Field Surveys, EMF Rapid Program, Engineering Project No.3

Energy Technology Data Exchange (ETDEWEB)

Enertech Consultants

1996-04-01

The EMF Research and Public Information Dissemination Program (RAPID) includes several engineering research in the area of exposure assessment and source characterization. RAPID engineering project No. 3: ''Environmental Field Surveys'' was performed to obtain information on the levels and characteristics of different environments, for which only limited data were available, especially in comparison to magnetic field data for the residential environment and for electric utility facilities, such as power lines and substations. This project was also to provide information on the contribution of various field sources in the surveyed environments. Magnetic field surveys were performed at four sites for each of five environments: schools, hospitals, office buildings, machine shops, and grocery stores. Of the twenty sites surveyed, 11 were located in the San Francisco Bay Area and 9 in Massachusetts. The surveys used a protocol based on magnetic field measurements and observation of activity patterns, designed to provide estimates of magnetic field exposure by type of people and by type of sources. The magnetic field surveys conducted by this project produced a large amount of data which will form a part of the EMF measurement database Field and exposure data were obtained separately for ''area exposure'' and ''at exposure points''. An exposure point is a location where persons engage in fixed, site specific activities near a local source that creates a significant increase in the area field. The area field is produced by ''area sources'', whose location and field distribution is in general not related to the location of the people in the area.

Corporate Social Responsibility in Engineering Education. A French Survey

Science.gov (United States)

Didier, C.; Huet, R.

2008-01-01

In this paper, we present and discuss the results of a survey of how corporate social responsibility (CSR) is being discussed and taught in engineering education in France. We shall first describe how those questions have been recently tackled in various programmes of higher education in France. We shall also analyse what faculty members have to…

Metamodels for Computer-Based Engineering Design: Survey and Recommendations

Science.gov (United States)

Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

1997-01-01

The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

Survey of materials and other problems of relevance in safety engineering, and an assessment of their reflection in regulatory guides for conventional and nuclear engineering (1. technical report)

International Nuclear Information System (INIS)

Trunk, M.; Herter, K.H.

1984-01-01

Survey and assessment of nuclear engineering specifications and regulatory guides (ASME-BPVC Section III, division 1,2 and KTA, BS 5500) with regard to materials, dimensioning and testing for the purpose of showing to what extent available technical codes, regulatory guides and safety codes are useful in preventing failures and defining the safe limit. The other question examined is that of how these codes ought to be brought up to date in order to reflect the latest state of the art in science and technology. (orig./HP) [de

STEM Career Cluster Engineering and Technology Education pathway in Georgia: Perceptions of Georgia engineering and technology education high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education survey

Science.gov (United States)

Crenshaw, Mark VanBuren

This study examined the perceptions held by Georgia Science, Technology, Engineering, and Mathematics (STEM) Career Cluster Engineering and Technology Education (ETE) high school pathway teachers and Georgia's Career, Technical and Agriculture Education (CTAE) administrators regarding the ETE pathway and its effect on implementation within their district and schools. It provides strategies for ETE teaching methods, curriculum content, STEM integration, and how to improve the ETE pathway program of study. Current teaching and curricular trends were examined in ETE as well as the role ETE should play as related to STEM education. The study, using the Characteristics of Engineering and Technology Education Survey, was conducted to answer the following research questions: (a) Is there a significant difference in the perception of ETE teaching methodology between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (b) Is there a significant difference in the perception of ETE curriculum content between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (c) Is there a significant difference in the perception of STEM integration in the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? and (d) Is there a significant difference in the perception of how to improve the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? Suggestions for further research also were offered.

7 CFR 1737.31 - Area Coverage Survey (ACS).

Science.gov (United States)

2010-01-01

... an ACS are provided in RUS Telecommunications Engineering and Construction Manual section 205. (e... Studies-Area Coverage Survey and Loan Design § 1737.31 Area Coverage Survey (ACS). (a) The Area Coverage... the borrower's records contain sufficient information as to subscriber development to enable cost...

A cross-sectional survey of parental care-seeking behavior for ...

African Journals Online (AJOL)

Mohammed Baba Abdulkadir

2016-03-11

Mar 11, 2016 ... Material and methods: The study is a secondary analysis of 2013 Demographic ... data for Nigeria, which was a cross-sectional survey conducted nationwide to .... excludes no medical care, pharmacies, shops and traditional.

5th International Conference on Engineering Surveying Brijuni, September 22-24, 2011

Directory of Open Access Journals (Sweden)

Rinaldo Paar

2011-12-01

Full Text Available 5th International Conference on Engineering Surveying was held on the Brijuni Islands from 22 to 24 September 2011. The conference organizers were the Department of Surveying Faculty of Civil Engineering at the Slovak University of Technology in Bratislava and the Institute for Applied Geodesy at the Faculty of Geodesy, University of Zagreb, with the FIG Commission 6. The conference was held under the patronage of the Ministry of Environmental Protection, Physical Planning and Construction of the Republic of Croatia. The conference took place in the Castrum Congress Hall of Hotel Neptun-Istra. The official language of the conference was English. The conference was attended by 70 representatives from Croatia, Slovenia, Serbia, Kosovo, Austria, Germany, Hungary, Greece, Czech Republic and Slovakia, and a total of 40 papers were presented.

Feasibility online survey to estimate physical activity level among the students studying professional courses: a cross-sectional online survey.

Science.gov (United States)

Sudha, Bhumika; Samuel, Asir John; Narkeesh, Kanimozhi

2018-02-01

The aim of the study was to estimate the physical activity (PA) level among the professional college students in North India. One hundred three professional college students in the age group of 18-25 years were recruited by simple random sampling for this cross-sectional online survey. The survey was advertised on the social networking sites (Facebook, WhatsApp) through a link www.surveymonkey.com/r/MG-588BY. A Short Form of International Physical Activity Questionnaire was used for this survey study. The questionnaire included total 8 questions on the basis of previous 7 days. The questionnaire consists of 3 main categories which were vigorous, moderate and high PA. Time spent in each activity level was multiplied with the metabolic equivalent of task (MET), which has previously set to 8.0 for vigorous activity, 4.0 for moderate activity, 3.3 for walking, and 1.5 for sitting. By multiplying MET with number of days and minutes performed weekly, amount of each activity level was calculated and measured as MET-min/wk. Further by adding MET minutes for each activity level, total MET-min/wk was calculated. Total number of 100 students participated in this study, and it was shown that all professional course students show different levels in PA. The total PA level among professional college students, which includes, physiotherapy, dental, medical, nursing, lab technician, pharmacy, management, law, engineering, were 434.4 (0-7,866), 170.3 (0-1,129), 87.7 (0-445), 102.8 (0-180), 469 (0-1,164), 0 (0-0), 645 (0-1,836), 337 (0-1,890), 396 (0-968) MET-min/wk respectively. PA levels among professional college students in North India have been established.

Aerial radiological survey of the Idaho National Engineering Laboratory, Idaho Falls, Idaho. Date of survey: June 1982

International Nuclear Information System (INIS)

1984-02-01

An aerial radiological survey of the Idaho National Engineering Laboratory (INEL) was conducted during June 1982 by EG and G Energy Measurements, Inc. for the United States Department of Energy (DOE). The survey consisted of airborne measurements of both natural and man-made gamma radiation from the terrain surface in and around the INEL site. These measurements allowed an estimate of the distribution of isotopic concentrations in the survey area. Results are reported as isopleths superimposed on maps and photographs of the area. Gamma ray energy spectra are also presented for the net man-made radionuclides. The survey was designed to cover all of the area within a 2 mile radius of any facility at the INEL. Several areas of man-made activity were detected. These areas are all known working or storage areas which are associated with normal operations at the INEL. 3 references, 48 figures, 5 tables

Experimental Engineering Section semiannual progress report (excluding reactor programs), March 1, 1975--August 31, 1975

Energy Technology Data Exchange (ETDEWEB)

Scott, C.D.; Burtis, C.A.; Groenier, W.S.; Pitt, W.W.; Ryon, A.D.; Watson, C.D.; Watson, J.S. (comps.)

1976-09-01

Sections are included on centrifugal analyzer development, advanced analytical techniques, bioengineering research and development, environmental studies, chemical engineering research, controlled thermonuclear processing, and coal conversion process development. A separate abstract was prepared for each section. (JRD)

Sample size methods for estimating HIV incidence from cross-sectional surveys.

Science.gov (United States)

Konikoff, Jacob; Brookmeyer, Ron

2015-12-01

Understanding HIV incidence, the rate at which new infections occur in populations, is critical for tracking and surveillance of the epidemic. In this article, we derive methods for determining sample sizes for cross-sectional surveys to estimate incidence with sufficient precision. We further show how to specify sample sizes for two successive cross-sectional surveys to detect changes in incidence with adequate power. In these surveys biomarkers such as CD4 cell count, viral load, and recently developed serological assays are used to determine which individuals are in an early disease stage of infection. The total number of individuals in this stage, divided by the number of people who are uninfected, is used to approximate the incidence rate. Our methods account for uncertainty in the durations of time spent in the biomarker defined early disease stage. We find that failure to account for this uncertainty when designing surveys can lead to imprecise estimates of incidence and underpowered studies. We evaluated our sample size methods in simulations and found that they performed well in a variety of underlying epidemics. Code for implementing our methods in R is available with this article at the Biometrics website on Wiley Online Library. © 2015, The International Biometric Society.

Special Section on Synchronization in Nonlinear Science and Engineering

Science.gov (United States)

Ikeguchi, Tohru; Tokuda, Isao

Synchronization is a ubiquitous phenomenon of coupled nonlinear oscillators, commonly found in physics, engineering, biology, and other diverse disciplines. It has a long research history back to Christiaan Huygens, who discovered synchronized motion of two pendulum clocks in 1673. It is very easy to observe synchronization in our daily life: e.g., metronomes, candle fires, pet-bottle oscillators, saltwater oscillators, and so on(See, for example, experimental movies at http://www.youtube.com/user/IkeguchiLab?feature=watch). For the last few decades, significant development has been made from both theories and experiments on synchronization of coupled limit cycle oscillators as well as coupled chaotic oscillators. Applications have been also developed to communication technologies, controlling techniques, and data analysis. Combined with the idea from complex network theory, neuroscience, and systems biology, the research speed of synchronization has been even accelerated. This Special Section of NOLTA is primarily dedicated to the recent advanced development of basics and applications of synchronization in science and engineering. A number of qualified works is included, ranging from experimental study on synchronization of Huygens' system, analog circuits, and singing voice to applied study of synchronization in communication networks. One invited paper is devoted to comprehensive reviews on generalized synchronization of chaotic oscillators. On behalf of the editorial committee of the special section, the guest editors would like to express their sincere thanks to all the authors for their excellent contributions. In particular, they are grateful to Prof. Dr. Ulrich Parlitz for contributing his distinguished review article. They would also like to thank the reviewers and the members of the guest editorial committee, especially Prof. Hiroo Sekiya of Chiba University and the editorial staffs of the NOLTA journal, for their supports on publishing this Special

Comprehensive engineering and radiological survey of the Bochvar VNIINM site

International Nuclear Information System (INIS)

Bazhanov, M.S.; Belousov, S.V.; Grishin, E.Zh.; Kotov, A.L.; Kuznetsov, A.Yu.; Savin, S.K.; Sukhanov, L.P.; Chernikov, M.A.; Utrobin, D.V.

2012-01-01

The comprehensive engineering and radiological survey (CERS) of Bochvar VNIINM war performed in 2010-2012. During the performance of the survey, radiometric measurements were taken to determine the total activity of α-emitting radionuclides in the air of work rooms, gas releases and in the environment, α- and β-emitting radionuclides in the air of work rooms, air releases from the site, waste waters, samples of snow, soil and vegetation, and in process oils. As a result of the work, experience was obtained in performing CERS of buildings and territory, standardized CERS programmes were developed, essential information was collected about radioactive contamination of both buildings and territory of the Bochvar VNIINM [ru

Introducing Principles of Land Surveying by Assigning a Practical Project

OpenAIRE

Introducing Principles of Land Surveying by Assigning a Practical Project

2016-01-01

A practical project is used in an engineering surveying course to expose sophomore and junior civil engineering students to several important issues related to the use of basic principles of land surveying. The project, which is the design of a two-lane rural highway to connect between two arbitrary points, requires students to draw the profile of the proposed highway along with the existing ground level. Areas of all cross-sections are then computed to enable quantity computations between th...

A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

Science.gov (United States)

Glyer-Culver, Betty

In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

An investigation of volute cross-sectional shape on turbocharger turbine under pulsating conditions in internal combustion engine

International Nuclear Information System (INIS)

Yang, Mingyang; Martinez-Botas, Ricardo; Rajoo, Srithar; Yokoyama, Takao; Ibaraki, Seiichi

2015-01-01

Highlights: • Cycle averaged efficiency is higher for the volute A (low aspect ratio). • More distorted flow in volute B is the reason for performance deterioration. • Flow in volute B (high aspect ratio) is more sensitive to pulsating flow. - Abstract: Engine downsizing is a proven method for CO_2 reduction in Internal Combustion Engine (ICE). A turbocharger, which reclaims the energy from the exhaust gas to boost the intake air, can effectively improve the power density of the engine thus is one of the key enablers to achieve the engine downsizing. Acknowledging its importance, many research efforts have gone into improving a turbocharger performance, which includes turbine volute. The cross-section design of a turbine volute in a turbocharger is usually a compromise between the engine level packaging and desired performance. Thus, it is beneficial to evaluate the effects of cross-sectional shape on a turbine performance. This paper presents experimental and computational investigation of the influence of volute cross-sectional shape on the performance of a radial turbocharger turbine under pulsating conditions. The cross-sectional shape of the baseline volute (denoted as Volute B) was optimized (Volute A) while the annulus distribution of area-to-radius ratio (A/R) for the two volute configurations are kept the same. Experimental results show that the turbine with the optimized volute A has better cycle averaged efficiency under pulsating flow conditions, for different loadings and frequencies. The advantage of performance is influenced by the operational conditions. After the experiment, a validated unsteady computational fluid dynamics (CFD) modeling was employed to investigate the mechanism by which performance differs between the baseline volute and the optimized version. Computational results show a stronger flow distortion in spanwise direction at the rotor inlet with the baseline volute. Furthermore, compared with the optimized volute, the flow

1990 National Compensation Survey of Research and Development Scientists and Engineers

Energy Technology Data Exchange (ETDEWEB)

1990-11-01

This report presents the results of the fourth in a new series of surveys of compensation and benefits for research and development (R D) scientists and engineers (S Es). The 1990 Survey represents the largest nationwide database of its kind, covering 104 establishments which provided data on almost 41,000 degreed researchers in the hard'' sciences. The fundamental nature of the survey has not changed: the focus is still on medium- and large-sized establishments which employ at least 100 degreed S Es in R D. The 1990 Survey contains data which cover about 18% of all establishments eligible to participate, encompassing approximately 18% of all eligible employees. As in the last three years, the survey sample constitutes a fairly good representation of the entire population of eligible establishments on the basis of business sector, geographic location, and size. Maturity-based analyses of salaries for some 34,000 nonsupervisory researchers are provided, as are job content-based analyses of more than 27,000 individual contributors and almost 5000 first level supervisors and division directors. Compensation policies and practices data are provided for 102 establishments, and benefits plans for 62 establishments are analyzed.

Surveys suck: Consumer preferences when purchasing genetically engineered foods.

Science.gov (United States)

Powell, Douglas A

2013-01-01

Many studies have attempted to gauge consumers' acceptance of genetically engineered or modified (GM) foods. Surveys, asking people about attitudes and intentions, are easy-to-collect proxies of consumer behavior. However, participants tend to respond as citizens of society, not discrete individuals, thereby inaccurately portraying their potential behavior. The Theory of Planned Behavior improved the accuracy of self-reported information, but its limited capacity to account for intention variance has been attributed to the hypothetical scenarios to which survey participants must respond. Valuation methods, asking how much consumers may be willing to pay or accept for GM foods, have revealed that consumers are usually willing to accept them at some price, or in some cases willing to pay a premium. Ultimately, it's consumers' actual--not intended--behavior that is of most interest to policy makers and business decision-makers. Real choice experiments offer the best avenue for revealing consumers' food choices in normal life.

Authors' perceptions of electronic publishing: two cross sectional surveys.

Science.gov (United States)

Schroter, Sara; Barratt, Helen; Smith, Jane

2004-06-05

To evaluate how acceptable authors find the BMJ's current practice of publishing short versions of research articles in the paper journal and a longer version on the web and to determine authors' attitudes towards publishing only abstracts in the paper journal and publishing unedited versions on bmj.com once papers have been accepted for publication. Two cross sectional surveys. General medical journal. Survey 1: corresponding authors of a consecutive sample of published BMJ research articles that had undergone the ELPS (electronic long, paper short) process. Survey 2: corresponding authors of consecutive research articles submitted to BMJ. Response rates were 90% (104/115) in survey 1 and 75% (213/283) in survey 2. ELPS is largely acceptable to BMJ authors, but there is some concern that electronic information is not permanent and uncertainty about how versions are referenced. While authors who had experienced ELPS reported some problems with editors shortening papers, most were able to rectify these. Overall, 70% thought that the BMJ should continue to use ELPS; 49% thought that publishing just the abstract in the printed journal with the full version only on bmj.com was unacceptable; and 23% thought it unacceptable to post unedited versions on bmj.com once a paper had been accepted for publication. It is acceptable to authors to publish short versions of research articles in the printed version of a general medical journal with longer versions on the website. Authors dislike the idea of publishing only abstracts in the printed journal but are in favour of posting accepted articles on the website ahead of the printed version.

The Tsunami Project: Integrating engineering, natural and social sciences into post-tsunami surveys

Science.gov (United States)

McAdoo, B. G.; Goff, J. R.; Fritz, H. M.; Cochard, R.; Kong, L. S.

2009-12-01

Complexities resulting from recent tsunamis in the Solomon Islands (2007), Java (2006) and Sumatra (2004, 2005) have demonstrated the need for an integrated, interdisciplinary team of engineers, natural and social scientists to better understand the nature of the disaster. Documenting the complex interactions in the coupled human-environment system necessitate a coordinated, interdisciplinary approach that combines the strengths of engineering, geoscience, ecology and social science. Engineers, modelers and geoscientists untangle the forces required to leave an imprint of a tsunami in the geologic record. These same forces affect ecosystems that provide services from buffers to food security; therefore coastal ecologists play a vital role. It is also crucial to understand the social structures that contribute to disasters, so local or regional policy experts, planners, economists, etc. should be included. When these experts arrive in a disaster area as part of an Interdisciplinary Tsunami Survey Team, the interactions between the systems can be discussed in the field, and site-specific data can be collected. A diverse team in the field following a tsunami shares critical resources and discoveries in real-time, making the survey more efficient. Following the 2006 Central Java earthquake and tsunami, civil engineers covered broad areas quickly, collecting ephemeral water level data and communicating areas of interest to the geologists, who would follow to do the slower sediment data collection. The 2007 Solomon Islands earthquake and tsunami caused extensive damage to the coral reef, which highlighting the need to have an ecologist on the team who was able to identify species and their energy tolerance. Rather than diluting the quality of post-tsunami data collection, this approach in fact strengthens it- engineers and geoscientists no longer have to indentify coral or mangrove species, nor do ecologists evaluate the velocity of a wave as it impacted a forested

Wetlands Research Program. Corps of Engineers Wetlands Delineation Manual. Appendix C. Sections 1 and 2. Region 2 - Southeast.

Science.gov (United States)

1987-01-01

22 7.V.: 14 -1b Jil -7 1 N.- .- WETLANDS RESEARCH PROGRAM TECHNICAL REPORT Y-87-1 CORPS OF ENGINEERS WETLANDS DELINEATION MANUAL APPENDIX C SECTIONS ...ARMYLA- US Army Corps of Engineers Washington, DC 20314-1000 B , , , -I *. 4 -w *" APPENDIX C SECTION 1 NATIONAL LIST OF PLANT SPECIES THAT OCCUR IN...Redtop FACW A. hiernalia (Walter) B.S.P. Winter bent FAC A. scabra Wilid. Rough bentgrass FAC A. st~nfyaL. Carpet bentgrass FACW Aletris aurea

Cross-sectional serological survey of human fascioliasis in haiti.

Science.gov (United States)

Agnamey, P; Fortes-Lopes, E; Raccurt, C P; Boncy, J; Totet, A

2012-01-01

Fasciola hepatica, the aetiological agent of fascioliasis in the Caribbean region, occurs throughout the major islands of the Greater Antilles and in localised zones on two islands (Martinique and Saint Lucia) of the Lesser Antilles. However, apart from Puerto Rico, information regarding human fascioliasis in islands of the Caribbean is out of date or unavailable, or even nonexistent as in Haiti. The authors conducted a retrospective, cross-sectional serological survey in Port-au-Prince using a Western blotting test (LDBIO Diagnostics) on human fascioliasis in Haiti. A total of 216 serum samples obtained from apparently healthy adults were tested. The frequency of antibodies in serum samples of the study population was 6.5% (14/216). The immunodominant bands recognised in Western blots were 27-28 kDa (100%), 42 kDa (64%), 60 kDa, and 8-9 kDa (28%). This is the first survey to reveal a relatively low proportion of asymptomatic F. hepatica-infected humans in Haiti.

Cross-Sectional Serological Survey of Human Fascioliasis in Haiti

Directory of Open Access Journals (Sweden)

P. Agnamey

2012-01-01

Full Text Available Fasciola hepatica, the aetiological agent of fascioliasis in the Caribbean region, occurs throughout the major islands of the Greater Antilles and in localised zones on two islands (Martinique and Saint Lucia of the Lesser Antilles. However, apart from Puerto Rico, information regarding human fascioliasis in islands of the Caribbean is out of date or unavailable, or even nonexistent as in Haiti. The authors conducted a retrospective, cross-sectional serological survey in Port-au-Prince using a Western blotting test (LDBIO Diagnostics on human fascioliasis in Haiti. A total of 216 serum samples obtained from apparently healthy adults were tested. The frequency of antibodies in serum samples of the study population was 6.5% (14/216. The immunodominant bands recognised in Western blots were 27-28 kDa (100%, 42 kDa (64%, 60 kDa, and 8-9 kDa (28%. This is the first survey to reveal a relatively low proportion of asymptomatic F. hepatica-infected humans in Haiti.

Survey on the technological development issues for large-scale methanol engine power generation plant; Ogata methanol engine hatsuden plant ni kansuru gijutsu kaihatsu kadai chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Based on the result of `Survey on the feasibility of large-scale methanol engine power generation plant` in fiscal 1992, concrete technological development issues were studied for its practical use, and the technological R & D scheme was prepared for large-scale methanol engine power plant featured by low NOx and high efficiency. Technological development issues of this plant were as follows: improvement of thermal efficiency, reduction of NOx emission, improvement of the reliability and durability of ignition and fuel injection systems, and reduction of vibration. As the economical effect of the technological development, the profitability of NOx control measures was compared between this methanol engine and conventional heavy oil diesel engines or gas engines. As a result, this engine was more economical than conventional engines. It was suggested that development of the equipment will be completed in nearly 4 years through every component study, single-cylinder model experiment and real engine test. 21 refs., 43 figs., 19 tabs.

Musculoskeletal impairment survey in Rwanda: Design of survey tool, survey methodology, and results of the pilot study (a cross sectional survey

Directory of Open Access Journals (Sweden)

Simms Victoria

2007-03-01

Full Text Available Abstract Background Musculoskeletal impairment (MSI is an important cause of morbidity and mortality worldwide, especially in developing countries. Prevalence studies for MSI in the developing world have used varying methodologies and are seldom directly comparable. This study aimed to develop a new tool to screen for and diagnose MSI and to pilot test the methodology for a national survey in Rwanda. Methods A 7 question screening tool to identify cases of MSI was developed through literature review and discussions with healthcare professionals. To validate the tool, trained rehabilitation technicians screened 93 previously identified gold standard 'cases' and 86 'non cases'. Sensitivity, specificity and positive predictive value were calculated. A standardised examination protocol was developed to determine the aetiology and diagnosis of MSI for those who fail the screening test. For the national survey in Rwanda, multistage cluster random sampling, with probability proportional to size procedures will be used for selection of a cross-sectional, nationally representative sample of the population. Households to be surveyed will be chosen through compact segment sampling and all individuals within chosen households will be screened. A pilot survey of 680 individuals was conducted using the protocol. Results: The screening tool demonstrated 99% sensitivity and 97% specificity for MSI, and a positive predictive value of 98%. During the pilot study 468 out of 680 eligible subjects (69% were screened. 45 diagnoses were identified in 38 persons who were cases of MSI. The subjects were grouped into categories based on diagnostic subgroups of congenital (1, traumatic (17, infective (2 neurological (6 and other acquired(19. They were also separated into mild (42.1%, moderate (42.1% and severe (15.8% cases, using an operational definition derived from the World Health Organisation's International Classification of Functioning, Disability and Health

Survey report for fiscal 2000. Survey on lifelong education system for chemical engineers; 2000 nendo chosa hokokusho. Kagaku gijutsusha shogai kyoiku system chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to identify social needs for continuous education of chemical engineers, a questionnaire survey was performed on member corporations and research institutes in chemical industries. The result of the survey revealed that, among the 1,032 replies, about 60% of the corporations are conducting the continuous education systematically, and 73% is planning to continue it into the future. With regard to its implementation, about 70% of them use the combination of in-house and outside educational organizations, while in using the outside organizations, expectation toward academic societies is as overwhelmingly high as about 60%. Themes of the seminars include the 'latest waste water treatment', 'latest air pollution preventing technologies', and 'latest industrial wastes recovery and treatment technologies' occupying the top three ranks, followed by the 'safety evaluation' and 'safe design' indicating high interest in environment and safety. For engineer ethics, planning and personnel departments showed as high interest as about 80% or higher, but it is about 60% in manufacturing departments. It was revealed that academic societies in Europe and America are paying efforts in the continuous education of member engineers, which, in turn, contribute to financial bases of the academic societies. (NEDO)

Survey of modern power plants driven by diesel and gas engines

Energy Technology Data Exchange (ETDEWEB)

Niemi, S. [Turku Polytechnic, Turku (Finland)

1997-12-31

This report surveys the latest technology of power plants driven by reciprocating internal combustion (IC) engines, from information collected from publications made mainly during the 1990`s. Diesel and gas engines are considered competitive prime movers in power production due mainly to their high full- and part-load brake thermal efficiency, ability to burn different fuels, short construction time and fast start-ups. The market for engine power plants has grown rapidly, with estimated total orders for reciprocating engines of 1 MW output and more reaching the 5000 unit level, (10 GW), between June 1995 and May 1996. Industrialized countries much prefer combined heat and power (CHP) production. Intense interest has been shown in recent years in alternative gas fuels; natural gas appears to be the most promising, but liquid petroleum gas, gas from sewage disposal plants, landfill gas and other biogases, as well as wood gas have also been recognized as other alternatives. Liquid alternatives such as fuels and pyrolysis oil have also been mentioned, in addition to information on coal burning engines. The percentage of gas engines used has increased and different ones are being developed, based on either the traditional spark ignition (SI), dual-fuel technology or the more recent high pressure gas injection system. In cold climates, energy production is largely based on CHP plants. Waste heat is utilized for local, regional or district heating or for industrial uses like drying, heating, cooling etc. Even radiative and convective heat from gen-set surfaces are employed, and boilers are used with exhaust outlet temperatures of below dew point. Combined cycle schemes, including turbo compound systems and steam turbines, are also incorporated into engine power plants in order to increase output and efficiency. Two-stroke, low-speed diesel engine plants show the highest electric efficiencies, with combined cycle plants reaching up to 54 %, while gas engine plants achieved

Survey of modern power plants driven by diesel and gas engines

Energy Technology Data Exchange (ETDEWEB)

Niemi, S [Turku Polytechnic, Turku (Finland)

1998-12-31

This report surveys the latest technology of power plants driven by reciprocating internal combustion (IC) engines, from information collected from publications made mainly during the 1990`s. Diesel and gas engines are considered competitive prime movers in power production due mainly to their high full- and part-load brake thermal efficiency, ability to burn different fuels, short construction time and fast start-ups. The market for engine power plants has grown rapidly, with estimated total orders for reciprocating engines of 1 MW output and more reaching the 5000 unit level, (10 GW), between June 1995 and May 1996. Industrialized countries much prefer combined heat and power (CHP) production. Intense interest has been shown in recent years in alternative gas fuels; natural gas appears to be the most promising, but liquid petroleum gas, gas from sewage disposal plants, landfill gas and other biogases, as well as wood gas have also been recognized as other alternatives. Liquid alternatives such as fuels and pyrolysis oil have also been mentioned, in addition to information on coal burning engines. The percentage of gas engines used has increased and different ones are being developed, based on either the traditional spark ignition (SI), dual-fuel technology or the more recent high pressure gas injection system. In cold climates, energy production is largely based on CHP plants. Waste heat is utilized for local, regional or district heating or for industrial uses like drying, heating, cooling etc. Even radiative and convective heat from gen-set surfaces are employed, and boilers are used with exhaust outlet temperatures of below dew point. Combined cycle schemes, including turbo compound systems and steam turbines, are also incorporated into engine power plants in order to increase output and efficiency. Two-stroke, low-speed diesel engine plants show the highest electric efficiencies, with combined cycle plants reaching up to 54 %, while gas engine plants achieved

A cross-sectional survey of essential surgical capacity in Somalia.

Science.gov (United States)

Elkheir, Natalie; Sharma, Akshay; Cherian, Meena; Saleh, Omar Abdelrahman; Everard, Marthe; Popal, Ghulam Rabani; Ibrahim, Abdi Awad

2014-05-07

To assess life-saving and disability-preventing surgical services (including emergency, trauma, obstetrics, anaesthesia) of health facilities in Somalia and to assist in the planning of strategies for strengthening surgical care systems. Cross-sectional survey. Health facilities in all 3 administrative zones of Somalia; northwest Somalia (NWS), known as Somaliland; northeast Somalia (NES), known as Puntland; and south/central Somalia (SCS). 14 health facilities. The WHO Tool for Situational Analysis to Assess Emergency and Essential Surgical Care was employed to capture a health facility's capacity to deliver surgical and anaesthesia services by investigating four categories of data: infrastructure, human resources, interventions available and equipment. The 14 facilities surveyed in Somalia represent 10 of the 18 districts throughout the country. The facilities serve an average patient population of 331 250 people, and 12 of the 14 identify as hospitals. While major surgical procedures were provided at many facilities (caesarean section, laparotomy, appendicectomy, etc), only 22% had fully available oxygen access, 50% fully available electricity and less than 30% had any management guidelines for emergency and surgical care. Furthermore, only 36% were able to provide general anaesthesia inhalation due to lack of skills, supplies and equipment. Basic supplies for airway management and the prevention of infection transmission were severely lacking in most facilities. According to the results of the WHO Tool for Situational Analysis to Assess Emergency and Essential Surgical Care survey, there exist significant gaps in the capacity of emergency and essential surgical services in Somalia including inadequacies in essential equipment, service provision and infrastructure. The information provided by the WHO tool can serve as a basis for evidence-based decisions on country-level policy regarding the allocation of resources and provision of emergency and essential

Special Section on Fusion Laser Engineering

International Nuclear Information System (INIS)

Murray, J. R.; Soures, J. M.

2004-01-01

The National Ignition Facility (NIF) now under construction at Lawrence Livermore National Laboratory contains a large frequency-tripled neodymium glass laser system designed to deliver approximately 2 megajoules of ultraviolet laser light in nanosecond pulses to targets for the study of high-energy-density physics and inertial confinement fusion. When all 192 laser beams are operational in 2008 it will dwarf any currently operating laser system, and even with only four beams now operating it is among the largest and most energetic of such systems. This special section is a collection of papers covering important issues in the optical engineering of large lasers such as NIF. A number of other papers on NIF engineering issues can be found in the Proceedings of SPIE, volume 5341. The first paper by Miller, Moses, and Wuest is an overview of the NIF project and the applications for which the facility was designed. The following papers discuss specific issues in greater depth. Spaeth, et al., discuss the NIF laser architecture, the effect of optical performance specifications on the focal spot size, and some aspects of cleanliness in large laser systems. Bonnano discusses the strategy for assembling NIF from ''line-replaceable units'' (LRU) that are assembled in a cleanroom and transported to the laser system in sealed containers that mate with the laser enclosures and allow clean installations without maintaining cleanroom standards throughout the facility. Zacharias, et al., discuss the alignment and wavefront control systems that allow beams to strike the target within ±50 microns after a beam path of about 350 meters. Shaw, et al., discuss a laser performance operations model that is used to set up the laser for a shot, and compare the predictions of the model to data from the first four operating beams. Ermolaeva, et al. discuss the design and performance of a custom optical fiber that was developed for use in NIF ultraviolet diagnostics. Finally, Honig discusses

Nuclear Engineering Academic Programs Survey, 2004

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2005-01-01

This annual report details the number of nuclear engineering bachelor's, master's, and doctoral degrees awarded at a sampling of academic programs from 1998-2004. It also looks at nuclear engineering degrees by curriculum and the number of students enrolled in nuclear engineering degree programs at 31 U.S. universities in 2004

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 20: Engineers as information processors: A survey of US aerospace engineering faculty and students

Science.gov (United States)

Holland, Maurita Peterson; Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1991-01-01

U.S. aerospace engineering faculty and students were surveyed as part of the NASA/DoD Aerospace Knowledge Research Project. Faculty and students were viewed as information processors within a conceptual framework of information seeking behavior. Questionnaires were received from 275 faculty members and 640 students, which were used to determine: (1) use and importance of information sources; (2) use of specific print sources and electronic data bases; (3) use of information technology; and (4) the influence of instruction on the use of information sources and the products of faculty and students. Little evidence was found to support the belief that instruction in library or engineering information use has significant impact either on broadening the frequency or range of information products and sources used by U.S. aerospace engineering students.

Decision Analysis on Survey and SOil Investigation Problem in Power Engineering Consultant

OpenAIRE

Setyaman, Amy Maulany; Sunitiyoso, Yos

2013-01-01

The study aims to gather and organize information for decision making against the problems arising in Power Engineering Consultant's survey and soil investigation product due to new policy in production cost efficiency that is implemented in 2012. The study conducted using Kepner and Tragoe's analytical process that consisted of four stages analytical process such as situation analysis, problem analysis, decision making analysis and potential problem analysis. As for the decision making analy...

Quality Assessment Survey at the School of Civil Engineering at Aalborg University

DEFF Research Database (Denmark)

Brohus, Henrik

2008-01-01

the study board of civil engineering. The questionnaire was jointly developed for all study boards at Aalborg University. The questionnaire forms an investigation of students' satisfaction and evaluation of the overall structure of the education including self-reported performance assessment. The paper......As part of an improved quality assessment procedure at the School of Civil Engineering at Aalborg University, an online survey has been undertaken among all students. Due to external requirements and a wish for more structured feedback, an online questionnaire was presented to all students under...... discusses the structure of the questionnaire and presents the results. Finally, suggestions for improvements regarding the questionnaire and further quality assessment are included. The response rate was 40%. Overall, the results showed a general satisfaction with the studies although substantial variance...

Why medical students choose psychiatry - a 20 country cross-sectional survey

OpenAIRE

Farooq, Kitty; Lydall, Gregory J; Malik, Amit; Ndetei, David M; Bhugra, Dinesh

2014-01-01

BACKGROUND: Recruitment to psychiatry is insufficient to meet projected mental health service needs world-wide. We report on the career plans of final year medical students from 20 countries, investigating factors identified from the literature which influence psychiatric career choice. METHODS: Cross sectional electronic or paper survey. Subjects were final year medical students at 46 medical schools in participating countries. We assessed students' career intentions, motivations, medical sc...

Survey report for fiscal 2000. Survey on lifelong education system for chemical engineers; 2000 nendo chosa hokokusho. Kagaku gijutsusha shogai kyoiku system chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to identify social needs for continuous education of chemical engineers, a questionnaire survey was performed on member corporations and research institutes in chemical industries. The result of the survey revealed that, among the 1,032 replies, about 60% of the corporations are conducting the continuous education systematically, and 73% is planning to continue it into the future. With regard to its implementation, about 70% of them use the combination of in-house and outside educational organizations, while in using the outside organizations, expectation toward academic societies is as overwhelmingly high as about 60%. Themes of the seminars include the 'latest waste water treatment', 'latest air pollution preventing technologies', and 'latest industrial wastes recovery and treatment technologies' occupying the top three ranks, followed by the 'safety evaluation' and 'safe design' indicating high interest in environment and safety. For engineer ethics, planning and personnel departments showed as high interest as about 80% or higher, but it is about 60% in manufacturing departments. It was revealed that academic societies in Europe and America are paying efforts in the continuous education of member engineers, which, in turn, contribute to financial bases of the academic societies. (NEDO)

Orthopaedic nurses' perception of research utilization - A cross sectional survey

DEFF Research Database (Denmark)

Berthelsen, Connie Bøttcher; Hølge-Hazelton, Bibi

2015-01-01

The call for evidence-based knowledge in clinical nursing practice has increased during recent decades and research in orthopaedic nursing is needed to improve patients' conditions, care and treatment. A descriptive cross-sectional survey was conducted to determine the self-perceived theoretical....... The results indicated that despite the majority of orthopaedic nurses having low self-perceived theoretical knowledge and practical research competencies, their interest and motivation to improve these were high, especially their inner motivation. However, the nurses' inner motivation was inhibited by a lack...

Geometric procedures for civil engineers

CERN Document Server

Tonias, Elias C

2016-01-01

This book provides a multitude of geometric constructions usually encountered in civil engineering and surveying practice.  A detailed geometric solution is provided to each construction as well as a step-by-step set of programming instructions for incorporation into a computing system. The volume is comprised of 12 chapters and appendices that may be grouped in three major parts: the first is intended for those who love geometry for its own sake and its evolution through the ages, in general, and, more specifically, with the introduction of the computer. The second section addresses geometric features used in the book and provides support procedures used by the constructions presented. The remaining chapters and the appendices contain the various constructions. The volume is ideal for engineering practitioners in civil and construction engineering and allied areas.

Nearshore Survey System Evaluation

Science.gov (United States)

2017-12-01

environmental challenges. ERDC develops innovative solutions in civil and military engineering , geospatial sciences, water resources, and environmental...CRAB: A Unique Nearshore Surveying Vehicle.” American Society of Civil Engineers , Journal of Surveying Engineering 110(1): 1–7. Clausner, J. E., W...unlimited. The U.S. Army Engineer Research and Development Center (ERDC) solves the nation’s toughest engineering and

Estimating health expectancies from two cross-sectional surveys: The intercensal method

Directory of Open Access Journals (Sweden)

Michel Guillot

2009-10-01

Full Text Available Health expectancies are key indicators for monitoring the health of populations, as well as for informing debates about compression or expansion of morbidity. However, current methodologies for estimating them are not entirely satisfactory. They are either of limited applicability because of high data requirements (the multistate method or based on questionable assumptions (the Sullivan method. This paper proposes a new method, called the "intercensal" method, which relies on the multistate framework but uses widely available data. The method uses age-specific proportions "healthy" at two successive, independent cross-sectional health surveys, and, together with information on general mortality, solves for the set of transition probabilities that produces the observed sequence of proportions healthy. The system is solved by making realistic parametric assumptions about the age patterns of transition probabilities. Using data from the Health and Retirement Survey (HRS and from the National Health Interview Survey (NHIS, the method is tested against both the multistate method and the Sullivan method. We conclude that the intercensal approach is a promising framework for the indirect estimation of health expectancies.

Chemical Engineering Students: A Distinct Group among Engineers

Science.gov (United States)

Godwin, Allison; Potvin, Geoff

2013-01-01

This paper explores differences between chemical engineering students and students of other engineering disciplines, as identified by their intended college major. The data used in this analysis was taken from the nationally representative Sustainability and Gender in Engineering (SaGE) survey. Chemical engineering students differ significantly…

Rising trends and inequalities in cesarean section rates in Pakistan: Evidence from Pakistan Demographic and Health Surveys, 1990-2013.

Science.gov (United States)

Mumtaz, Sarwat; Bahk, Jinwook; Khang, Young-Ho

2017-01-01

Despite global efforts to improve maternal health, many developing countries including Pakistan have failed to achieve the target of a 75% reduction in maternal deaths by 2015. Addressing socioeconomic inequalities in access to emergency obstetric care is crucial for reducing the maternal mortality rate. This study was done to examine the time trends and socioeconomic inequalities in the utilization of cesarean section (C-section) in Pakistan during 1990-2013. We used data from the Pakistan Demographic and Health Surveys (PDHS) conducted during 1990 to 2013. All these surveys are nationally representative surveys of ever-married women aged 15-49 years with a sample size of 6611, 10,023, and 13,558 women in 1990-1991, 2006-2007, and 2012-2013, respectively, with an overall response rate of over 90%. The unit of analysis for this study was women with their most recent live birth in the five years preceding the surveys. Bivariate analyses and multivariable logistic regression models were employed to investigate the prevalence of cesarean sections according to selected sociodemographic characteristics of women. C-section rates were found to have increased during this period, with an especially significant rise from 2.7% in 1990-1991 to 15.8% in 2012-2013 with lower utilization among the non-educated women (7.5%), compared with the women with higher education (40.3%). C-section rates ranged from 5.5% in the poorest women to 35.3% in the richest women. Only 11.5% of the rural women had a C-section compared to 25.6% of the urban women. A greater likelihood of having a cesarean section was observed in the richest, highly educated, and urban-living women while there was no significant difference observed in cesarean section rates between the private and public sectors in all three surveys. To improve maternal health, routine monitoring and evaluation of the provision of emergency obstetric services are needed to address the underuse of C-section in poor and rural areas and

Rising trends and inequalities in cesarean section rates in Pakistan: Evidence from Pakistan Demographic and Health Surveys, 1990-2013.

Directory of Open Access Journals (Sweden)

Sarwat Mumtaz

Full Text Available Despite global efforts to improve maternal health, many developing countries including Pakistan have failed to achieve the target of a 75% reduction in maternal deaths by 2015. Addressing socioeconomic inequalities in access to emergency obstetric care is crucial for reducing the maternal mortality rate. This study was done to examine the time trends and socioeconomic inequalities in the utilization of cesarean section (C-section in Pakistan during 1990-2013. We used data from the Pakistan Demographic and Health Surveys (PDHS conducted during 1990 to 2013. All these surveys are nationally representative surveys of ever-married women aged 15-49 years with a sample size of 6611, 10,023, and 13,558 women in 1990-1991, 2006-2007, and 2012-2013, respectively, with an overall response rate of over 90%. The unit of analysis for this study was women with their most recent live birth in the five years preceding the surveys. Bivariate analyses and multivariable logistic regression models were employed to investigate the prevalence of cesarean sections according to selected sociodemographic characteristics of women. C-section rates were found to have increased during this period, with an especially significant rise from 2.7% in 1990-1991 to 15.8% in 2012-2013 with lower utilization among the non-educated women (7.5%, compared with the women with higher education (40.3%. C-section rates ranged from 5.5% in the poorest women to 35.3% in the richest women. Only 11.5% of the rural women had a C-section compared to 25.6% of the urban women. A greater likelihood of having a cesarean section was observed in the richest, highly educated, and urban-living women while there was no significant difference observed in cesarean section rates between the private and public sectors in all three surveys. To improve maternal health, routine monitoring and evaluation of the provision of emergency obstetric services are needed to address the underuse of C-section in poor and

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 14: Engineering work and information use in aerospace: Results of a telephone survey

Science.gov (United States)

Pinelli, Thomas E.; Kennedy, John M.; White, Terry F.

1992-01-01

A telephone survey of U.S. aerospace engineers and scientists who were on the Society of Automotive Engineers (SAE) mailing list was conducted between August 14-26, 1991. The survey was undertaken to obtain information on the daily work activities of aerospace engineers and scientists, to measure various practices used by aerospace engineers and scientists to obtain STI, and to ask aerospace engineers and scientists about their use of electronic networks. Co-workers were found important sources of information. Co-workers are used to obtain technical information because the information they have is relevant, not because co-workers are accessible. As technical uncertainty increases, so does the need for information internal and external to the organization. Electronic networks enjoy widespread use within the aerospace community. These networks are accessible and they are used to contact people at remote sites. About 80 percent of the respondents used electronic mail, file transfer, and information or data retrieval to commercial or in-house data bases.

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Science.gov (United States)

2010-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment...-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Standards and Certification Provisions § 90.116 Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine...

40 CFR 91.115 - Certification procedure-determining engine power and engine families.

Science.gov (United States)

2010-07-01

... engine power and engine families. 91.115 Section 91.115 Protection of Environment ENVIRONMENTAL... engine power and engine families. (a) Engine power must be calculated using SAE J1228. This procedure has... engine families as specified by paragraph (c) of this section, comprised of engines expected to have...

Geophysical surveys for buried waste detection at the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Sandness, G.A.; Rising, J.L.; Kimbrough, J.R.

1979-12-01

This report describes a series of geophysical surveys performed at the Idaho National Engineering Laboratory (INEL). The main purpose of the surveys was to evaluate techniques, principally ground-penetrating radar, for detecting and mapping radioactive wastes buried in shallow trenches and pits. A second purpose was to determine the feasibility of using ground-penetrating radar to measure the depth of basalt bedrock. A prototype geophyscal survey system developed by the US Department of Energy's Pacific Northwest Laboratory was used for this study. Radar, magnetometer, and metal detector measurements were made at three sites in the Radioactive Waste Management Complex (RWMC) at INEL. Radar measurements were made at fourth site adjacent to the RWMC. The combination of three geophysical methods was shown to provide considerable information about the distribution of buried waste materials. The tests confirmed the potential effectiveness of the radar method, but they also pointed out the need for continued research and development in ground-penetrating radar technology. The radar system tested in this study appears to be capable of measuring the depth to basalt in the vicinity of the RWMC

Mid-section of a can-annular gas turbine engine with a cooling system for the transition

Science.gov (United States)

Wiebe, David J.; Rodriguez, Jose L.

2015-12-08

A cooling system is provided for a transition (420) of a gas turbine engine (410). The cooling system includes a cowling (460) configured to receive an air flow (111) from an outlet of a compressor section of the gas turbine engine (410). The cowling (460) is positioned adjacent to a region of the transition (420) to cool the transition region upon circulation of the air flow within the cowling (460). The cooling system further includes a manifold (121) to directly couple the air flow (111) from the compressor section outlet to an inlet (462) of the cowling (460). The cowling (460) is configured to circulate the air flow (111) within an interior space (426) of the cowling (460) that extends radially outward from an inner diameter (423) of the cowling to an outer diameter (424) of the cowling at an outer surface.

Conducting Sanitary Surveys of Water Supply Systems. Student Workbook.

Science.gov (United States)

1976

This workbook is utilized in connection with a 40-hour course on sanitary surveys of water supply systems for biologists, chemists, and engineers with experience as a water supply evaluator. Practical training is provided in each of the 21 self-contained modules. Each module outlines the purpose, objectives and content for that section. The course…

Engineering Geology | Alaska Division of Geological & Geophysical Surveys

Science.gov (United States)

Alaska's Mineral Industry Reports AKGeology.info Rare Earth Elements WebGeochem Engineering Geology Alaska content Engineering Geology Additional information Engineering Geology Posters and Presentations Alaska Alaska MAPTEACH Tsunami Inundation Mapping Engineering Geology Staff Projects The Engineering Geology

Transportation assimilation revisited: New evidence from repeated cross-sectional survey data

Science.gov (United States)

2018-01-01

Background Based on single cross-sectional data, prior research finds evidence of “transportation assimilation” among U.S. immigrants: the length of stay in the U.S. is negatively correlated with public transit use. This paper revisits this question by using repeated cross-sectional data, and examines the trend of transportation assimilation over time. Methods and results Using 1980, 1990, 2000 1% census and 2010 (1%) American Community Survey, I examine the relationship between the length of stay in the U.S. and public transit ridership among immigrants. I first run regressions separately in four data sets: I regress public transit ridership on the length of stay, controlling for other individual and geographic variables. I then compare the magnitudes of the relationship in four regressions. To study how the rate of transportation assimilation changes over time, I pool the data set and regress public transit ridership on the length of stay and its interactions with year dummies to compare the coefficients across surveys. Results confirm the conclusion of transportation assimilation: as the length of stay in the U.S. increases, an immigrant’s public transit use decreases. However, the repeated cross-section analysis suggests the assimilation rate has been decreasing in the past few decades. Conclusions This paper finds evidence of transportation assimilation: immigrants become less likely to ride public transit as the length of stay in the U.S. increases. The assimilation rate, however, has been decreasing over time. This paper finds that the rate of public transit ridership among new immigrants upon arrival, the geographic distribution of immigrants, and the changing demographics of the U.S. immigrants play roles in affecting the trend of transportation assimilation. PMID:29668676

Tuberculosis burden in an urban population: a cross sectional tuberculosis survey from Guinea Bissau

DEFF Research Database (Denmark)

Bjerregaard-Andersen, Morten; da Silva, Zacarias J; Ravn, Pernille

2010-01-01

BACKGROUND: Little is known about the prevalence of pulmonary tuberculosis (TB) in low income countries. We conducted a cross sectional survey for pulmonary TB and TB symptoms in Bissau, Guinea-Bissau, in an urban cohort with known HIV prevalence. TB surveillance in the area is routinely based...

Tuberculosis burden in an urban population: a cross sectional tuberculosis survey from Guinea-Bissau

DEFF Research Database (Denmark)

Bjerregaard-Andersen, Morten; da Silva, Zacarias J; Ravn, Pernille

2010-01-01

ABSTRACT: BACKGROUND: Little is known about the prevalence of pulmonary tuberculosis (TB) in low income countries. We conducted a cross sectional survey for pulmonary TB and TB symptoms in Bissau, Guinea-Bissau, in an urban cohort with known HIV prevalence. TB surveillance in the area is routinely...

A Physics-Based Engineering Approach to Predict the Cross Section for Advanced SRAMs

Science.gov (United States)

Li, Lei; Zhou, Wanting; Liu, Huihua

2012-12-01

This paper presents a physics-based engineering approach to estimate the heavy ion induced upset cross section for 6T SRAM cells from layout and technology parameters. The new approach calculates the effects of radiation with junction photocurrent, which is derived based on device physics. The new and simple approach handles the problem by using simple SPICE simulations. At first, the approach uses a standard SPICE program on a typical PC to predict the SPICE-simulated curve of the collected charge vs. its affected distance from the drain-body junction with the derived junction photocurrent. And then, the SPICE-simulated curve is used to calculate the heavy ion induced upset cross section with a simple model, which considers that the SEU cross section of a SRAM cell is more related to a “radius of influence” around a heavy ion strike than to the physical size of a diffusion node in the layout for advanced SRAMs in nano-scale process technologies. The calculated upset cross section based on this method is in good agreement with the test results for 6T SRAM cells processed using 90 nm process technology.

Using model based systems engineering for the development of the Large Synoptic Survey Telescope's operational plan

Science.gov (United States)

Selvy, Brian M.; Claver, Charles; Willman, Beth; Petravick, Don; Johnson, Margaret; Reil, Kevin; Marshall, Stuart; Thomas, Sandrine; Lotz, Paul; Schumacher, German; Lim, Kian-Tat; Jenness, Tim; Jacoby, Suzanne; Emmons, Ben; Axelrod, Tim

2016-08-01

We† provide an overview of the Model Based Systems Engineering (MBSE) language, tool, and methodology being used in our development of the Operational Plan for Large Synoptic Survey Telescope (LSST) operations. LSST's Systems Engineering (SE) team is using a model-based approach to operational plan development to: 1) capture the topdown stakeholders' needs and functional allocations defining the scope, required tasks, and personnel needed for operations, and 2) capture the bottom-up operations and maintenance activities required to conduct the LSST survey across its distributed operations sites for the full ten year survey duration. To accomplish these complimentary goals and ensure that they result in self-consistent results, we have developed a holistic approach using the Sparx Enterprise Architect modeling tool and Systems Modeling Language (SysML). This approach utilizes SysML Use Cases, Actors, associated relationships, and Activity Diagrams to document and refine all of the major operations and maintenance activities that will be required to successfully operate the observatory and meet stakeholder expectations. We have developed several customized extensions of the SysML language including the creation of a custom stereotyped Use Case element with unique tagged values, as well as unique association connectors and Actor stereotypes. We demonstrate this customized MBSE methodology enables us to define: 1) the rolls each human Actor must take on to successfully carry out the activities associated with the Use Cases; 2) the skills each Actor must possess; 3) the functional allocation of all required stakeholder activities and Use Cases to organizational entities tasked with carrying them out; and 4) the organization structure required to successfully execute the operational survey. Our approach allows for continual refinement utilizing the systems engineering spiral method to expose finer levels of detail as necessary. For example, the bottom-up, Use Case

Antibiotic use in dentistry: A cross-sectional survey from a developing country

OpenAIRE

Sivaramakrishnan Gowri; Deeksha Mehta; Sridharan Kannan

2015-01-01

Introduction: Antimicrobial resistance is a well-known entity and the most common factor leading to this is the irrational use of antibiotics. Several studies from the West have substantiated the irrational use of antibiotics in dentistry. Aims: The aim was to assess the knowledge, attitude, and practice (KAP) of antimicrobial drug use among dental fraternity in a tertiary care teaching dental college and hospital. Materials and methods: A cross-sectional survey of various dental fraternities...

A Survey of the Role of Thermodynamics and Transport Properties in Chemical Engineering University Education in Europe and the USA

Science.gov (United States)

Ahlstrom, Peter; Aim, Karel; Dohrn, Ralf; Elliott, J. Richard; Jackson, George; Jaubert, Jean-Noel; Macedo, Eugenia A.; Pokki, Juha-Pekka; Reczey, Kati; Victorov, Alexey; Zilnik, Ljudmila Fele; Economou, Ioannis G.

2010-01-01

A survey on the teaching of thermodynamics and transport phenomena in chemical engineering curricula in European and US Universities was performed and results are presented here. Overall, 136 universities and colleges responded to the survey, out of which 81 from Europe and 55 from the USA. In most of the institutions responding at least two…

A Survey of Physical Sciences, Engineering and Mathematics Faculty Regarding Author Fees in Open Access Journals

Science.gov (United States)

Cusker, Jeremy; Rauh, Anne E.

2014-01-01

Discussions of the potential of open access publishing frequently must contend with the skepticism of research authors regarding the need to pay author fees (also known as publication fees). With that in mind, the authors undertook a survey of faculty, postdocs, and graduate students in physical science, mathematics, and engineering fields at two…

Two-dimensional cross-section and SED uncertainty analysis for the Fusion Engineering Device (FED)

International Nuclear Information System (INIS)

Embrechts, M.J.; Urban, W.T.; Dudziak, D.J.

1982-01-01

The theory of two-dimensional cross-section and secondary-energy-distribution (SED) sensitivity was implemented by developing a two-dimensional sensitivity and uncertainty analysis code, SENSIT-2D. Analyses of the Fusion Engineering Design (FED) conceptual inboard shield indicate that, although the calculated uncertainties in the 2-D model are of the same order of magnitude as those resulting from the 1-D model, there might be severe differences. The more complex the geometry, the more compulsory a 2-D analysis becomes. Specific results show that the uncertainty for the integral heating of the toroidal field (TF) coil for the FED is 114.6%. The main contributors to the cross-section uncertainty are chromium and iron. Contributions to the total uncertainty were smaller for nickel, copper, hydrogen and carbon. All analyses were performed with the Los Alamos 42-group cross-section library generated from ENDF/B-V data, and the COVFILS covariance matrix library. The large uncertainties due to chromium result mainly from large convariances for the chromium total and elastic scattering cross sections

Surveys on awareness and needs of industries to external accreditation system in engineer education; Gijutsusha kyoiku no gaibu ninteiseido donyu ni taisuru sangyo kai no ioshiki to needs ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In certifying the engineer educational programs at advanced educational organizations, questionnaire and visiting surveys were performed to identify the awareness and needs of industries, and reflect the results to the external accreditation system. The questionnaire survey was conducted on 1,100 engineers acting in the wide technical areas. Effective replies were obtained from 528 engineers. The visiting survey was executed on different business areas and operations. The result of the survey revealed that, in the awareness related to international universality of the engineer education and engineer qualification, 87% answered that they feel they need them, but the cognition rate on the accreditation system has not reached even 50%. In hearing the opinions from representatives in the industries, they indicated that it is not correct to link the certification course of JABEE directly to the engineer qualification; international applicability of JABEE with America is fine, but defining the engineers who desire to come from Asian countries and work in Japan is necessary; the engineer education has its importance shifting from quantity to quality and specialization, but on the other hand diversity is also demanded; and criteria would be necessary to guarantee the minimum required knowledge and capability. (NEDO)

Engineering change management report 2012: Survey results on causes and effects, current practice, problems, and strategies in Brazil

DEFF Research Database (Denmark)

Chucholowski, Nepomuk; Langer, Stefan; Ferreira, Marcelo Gitirana Gomes

Engineering changes (ECs) are well known for generating additional costs and decreasing de-velopment efficiency. Yet, they are a fundamental part of product and service development and they are necessary to keep up with, for example, competitors, market trends or new technolo-gies. The effective...... management of engineering changes is a crucial precondition for Brazilian companies to successfully compete not only on the fast growing Brazilian market, but also on the world market which becomes more interesting due to the rising industrial power of Brazil. To achieve improvements in engineering change...... management practice, industry and universities need to work together. In this report the main findings of our study on Engineering Change Management (ECM) in Brazilian companies are presented, which indicate possible solution strategies and further research needs. Our survey aimed on the investigation...

Application of engineering surveying in engineering industry

Directory of Open Access Journals (Sweden)

Lucia Forgáčová

2005-11-01

Full Text Available This is a presentation of the application of surveying principles used in a process of building the electrolytic tinning line at the U.S.Steel s.r.o. Kosice. The work involved is setting up a new network of measuring points, as well as the effective implementation of suitable methodologies, instruments and measuring tools. All of these were focal points for the survey, required during the installation of machinery units for the new tinning line. The coil producing technology utilised on the line entails a high speed movement. In this context all methods and final measurements were adapted to a very high standard of precision in order to ensure a safe working environment and exclude the risk of malfunctions in the final production stage. The smallest variations in the positioning of machinery units, compared with technical drawings, could rise a danger of coil breakdown, line malfunction or personal injury.

FEED BACK ON STUDENTS INDUSTRIAL TRAINING FOR ENHANCING ENGINEERING EDUCATION QUALITY: A SURVEY BASED ANALYSIS

OpenAIRE

V. K. BANSAL,; SANDEEP GROVER; ASHOK KUMAR

2010-01-01

Indian industrial sector is passing through highly competitive phase due to globalization. Cut throat competition is predominant and quality is one of the decisive factors for sustainability. The role of industrial training in the engineering curricula of different universities is unarguable. Industrial training which is pre-existing in every technical institute is being reassessed through survey based questionnaires. The industrial feed back provides information’s on effective duration and a...

IT Barometer survey, Denmark

DEFF Research Database (Denmark)

Howard, Rob

1998-01-01

Survey results from Danish architects, engineers, contractors and property managers in the construction industry concerning their use of computers, communications, problems and needs.......Survey results from Danish architects, engineers, contractors and property managers in the construction industry concerning their use of computers, communications, problems and needs....

Nuclear engineering enrollments and degrees, 1994: Appendixes

International Nuclear Information System (INIS)

1995-05-01

This survey is designed to include those programs sponsored by the Department of Energy. The survey is designed to include those programs offering a major in nuclear engineering or course work equivalent to a major in other engineering disciplines that prepare the graduates to perform as nuclear engineers. This survey provides data on nuclear engineering enrollments and degrees for use in labor market analyses, information on education programs for students, and information on new graduates to employers, government agencies, academia and professional societies

From Ethnography to Items: A Mixed Methods Approach to Developing a Survey to Examine Graduate Engineering Student Retention

Science.gov (United States)

Crede, Erin; Borrego, Maura

2013-01-01

As part of a sequential exploratory mixed methods study, 9 months of ethnographically guided observations and interviews were used to develop a survey examining graduate engineering student retention. Findings from the ethnographic fieldwork yielded several themes, including international diversity, research group organization and climate,…

Triatoma dimidiata infestation in Chagas disease endemic regions of Guatemala: comparison of random and targeted cross-sectional surveys.

Directory of Open Access Journals (Sweden)

Raymond J King

Full Text Available BACKGROUND: Guatemala is presently engaged in the Central America Initiative to interrupt Chagas disease transmission by reducing intradomiciliary prevalence of Triatoma dimidiata, using targeted cross-sectional surveys to direct control measures to villages exceeding the 5% control threshold. The use of targeted surveys to guide disease control programs has not been evaluated. Here, we compare the findings from the targeted surveys to concurrent random cross-sectional surveys in two primary foci of Chagas disease transmission in central and southeastern Guatemala. METHODOLOGY/PRINCIPAL FINDINGS: Survey prevalences of T. dimidiata intradomiciliary infestation by village and region were compared. Univariate logistic regression was used to assess the use of risk factors to target surveys and to evaluate indicators associated with village level intradomiciliary prevalences >5% by survey and region. Multivariate logistic regression models were developed to assess the ability of random and targeted surveys to target villages with intradomiciliary prevalence exceeding the control threshold within each region. Regional prevalences did not vary by survey; however, village prevalences were significantly greater in random surveys in central (13.0% versus 8.7% and southeastern (22.7% versus 6.9% Guatemala. The number of significant risk factors detected did not vary by survey in central Guatemala but differed considerably in the southeast with a greater number of significant risk factors in the random survey (e.g. land surface temperature, relative humidity, cropland, grassland, tile flooring, and stick and mud and palm and straw walls. Differences in the direction of risk factor associations were observed between regions in both survey types. The overall discriminative capacity was significantly greater in the random surveys in central and southeastern Guatemala, with an area under the receiver-operator curve (AUC of 0.84 in the random surveys and

Altitude Performance Characteristics of Tail-pipe Burner with Convergingconical Burner Section on J47 Turbojet Engine

Science.gov (United States)

Prince, William R; Mcaulay, John E

1950-01-01

An investigation of turbojet-engine thrust augmentation by means of tail-pipe burning was conducted in the NACA Lewis altitude wind tunnel. Performance data were obtained with a tail-pipe burner having a converging conical burner section installed on an axial-flow-compressor type turbojet engine over a range of simulated flight conditions and tail-pipe fuel-air ratios with a fixed-area exhaust nozzle. A maximum tail-pipe combustion efficiency of 0.86 was obtained at an altitude of 15,000 feet and a flight Mach number of 0.23. Tail-pipe burner operation was possible up to an altitude of 45,000 feet at a flight Mach number of 0.23.

Changes in Hypertension Treatment in the Yaroslavl Region of Russia: Improvements Observed Between 2 Cross-Sectional Surveys

OpenAIRE

Mozheyko, Maria; Eregin, Sergey; Vigdorchik, Alexey; Tobe, Sheldon; Campbell, Norman; Riahi, Farhad; Hughes, David

2013-01-01

This prospective before-and-after survey of hypertensive patients visiting government-run outpatient health facilities in the Yaroslavl Region of Russia assessed blood pressure (BP)–related endpoints following initiation of a comprehensive health system improvement program for hypertension. Two cross-sectional surveys, one at baseline and the other approximately 1 year after program initiation, evaluated the primary measure of BP control rate. Secondary measures included mean BP levels and di...

Handbook of Software Engineering and Knowledge Engineering

CERN Document Server

2001-01-01

This is the first handbook to cover comprehensively both software engineering and knowledge engineering - two important fields that have become interwoven in recent years. Over 60 international experts have contributed to the book. Each chapter has been written in such a way that a practitioner of software engineering and knowledge engineering can easily understand and obtain useful information. Each chapter covers one topic and can be read independently of other chapters, providing both a general survey of the topic and an in-depth exposition of the state of the art.

Precision and accuracy of the static GNSS system for surveying networks used in Civil Engineering

Directory of Open Access Journals (Sweden)

Nixon Alexander Correa Muñoz

2018-01-01

Full Text Available A field check was implemented for calibrating surveying equipment. It was geo-referenced with a Total Station Theodolite and by implementing procedures concerning repeatability and reproducibility. We carried out GNSS (Global Navigation Satellite System static positioning with double frequency equipment, sensitizing occupation times, day times, uncorrected coordinates subjected to a differential correction procedure and type of coordinates obtained. This facilitated an evaluation of precision and accuracy for the GNSS positioning with the static method, which gave a global RMSE (root mean square error of 1 cm for conditions with no multipath effect and 4 cm for field calibration points close to buildings. Additionally, optimal results for occupation times of 30 minutes were found, and the need to use planar Cartesian coordinates to ensure compatibility with the surveys using electronic measurement of distances, which allows the use of the static GNSS positioning for geo-referencing precise surveying networks, and can be used in different applications in Civil Engineering.

The organisation and needs of young sections belonging to UEG National Societies: Results of a Europe-wide survey.

Science.gov (United States)

Ianiro, Gianluca; Castro, Valeria; Dolak, Werner; Ilie, Mădălina; Holleran, Grainne; Salaga, Maciej; van Herwaarden, Yasmijn; Burisch, Johan

2017-08-01

One of the aims of the Young Talent Group (YTG) is to make United European Gastroenterology (UEG) more attractive for young fellows interested in gastroenterology, and to involve them actively in UEG activities, by collaborating with young GI sections (YGIS) across Europe. Therefore, the YTG launched a survey to collect up-to-date information on YGISs belonging to UEG National Societies. The Friends of YTG were chosen as the target population and received a web-based questionnaire concerning their personal information, the structure of YGIS in their respective country, the YGIS' support mechanisms for young trainees, and ideas on how to improve them. Overall, 24 of 29 Friends answered the survey (83%). Among the Societies surveyed, only half have a young section. Typically, YGIS are supported, but not influenced, by National Societies through several initiatives. Results of the survey suggest that a lack of funding, of harmonised education, and of active roles available within National Societies, were the concerns most prevalent among young fellows. Our survey shows that the development of YGIS is being hindered by organisational, financial, and political issues. The YTG believes that a close collaboration between National Societies, UEG, and the YTG is necessary in order to offer young fellows the most productive and professionally satisfying future possible.

Nuclear Engineering Enrollments and Degrees Survey, 2005 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2006-01-01

This annual report details the number of nuclear engineering bachelor's, master's, and doctoral degrees awarded at a sampling of academic programs from 1998-2005. it also looks at nuclear engineering degrees by curriculum and the number of students enrolled in nuclear engineering degree programs at 30 U.S. universities in 2005

Engineering Faculty Attitudes to General Chemistry Courses in Engineering Curricula

Science.gov (United States)

Garip, Mehmet; Erdil, Erzat; Bilsel, Ayhan

2006-01-01

A survey on the attitudes of engineering faculty to chemistry, physics, and mathematics was conducted with the aim of clarifying the attitudes of engineering faculty to chemistry courses in relation to engineering education or curricula and assessing their expectations. The results confirm that on the whole chemistry is perceived as having a…

Catastrophic household expenditure on health in Nepal: a cross-sectional survey.

Science.gov (United States)

Saito, Eiko; Gilmour, Stuart; Rahman, Md Mizanur; Gautam, Ghan Shyam; Shrestha, Pradeep Krishna; Shibuya, Kenji

2014-10-01

To determine the incidence of - and illnesses commonly associated with - catastrophic household expenditure on health in Nepal. We did a cross-sectional population-based survey in five municipalities of Kathmandu Valley between November 2011 and January 2012. For each household surveyed, out-of-pocket spending on health in the previous 30 days that exceeded 10% of the household's total expenditure over the same period was considered to be catastrophic. We estimated the incidence and intensity of catastrophic health expenditure. We identified the illnesses most commonly associated with such expenditure using a Poisson regression model and assessed the distribution of expenditure by economic quintile of households using the concentration index. Overall, 284 of the 1997 households studied in Kathmandu, i.e. 13.8% after adjustment by sampling weight, reported catastrophic health expenditure in the 30 days before the survey. After adjusting for confounders, this expenditure was found to be associated with injuries, particularly those resulting from road traffic accidents. Catastrophic expenditure by households in the poorest quintile were associated with at least one episode of diabetes, asthma or heart disease. In an urban area of Nepal, catastrophic household expenditure on health was mostly associated with injuries and noncommunicable diseases such as diabetes and asthma. Throughout Nepal, interventions for the control and management of noncommunicable diseases and the prevention of road traffic accidents should be promoted. A phased introduction of health insurance should also reduce the incidence of catastrophic household expenditure.

Engineering students' sustainability approaches

Science.gov (United States)

Haase, S.

2014-05-01

Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The empirical base of the article is a nation-wide, web-based survey sent to all newly enrolled engineering students in Denmark commencing their education in the fall term 2010. The response rate was 46%. The survey focused on a variety of different aspects of what can be conceived as sustainability. By means of cluster analysis, three engineering student approaches to sustainability are identified and described. The article provides knowledge on the different prerequisites of engineering students in relation to the role of sustainability in engineering. This information is important input to educators trying to target new engineering students and contribute to the provision of engineers equipped to meet sustainability challenges.

A nationwide population-based cross-sectional survey of health-related quality of life in patients with myeloproliferative neoplasms in Denmark (MPNhealthSurvey: survey design and characteristics of respondents and nonrespondents

Directory of Open Access Journals (Sweden)

Brochmann N

2017-03-01

Full Text Available Nana Brochmann,1 Esben Meulengracht Flachs,2 Anne Illemann Christensen,3 Christen Lykkegaard Andersen,1 Knud Juel,3 Hans Carl Hasselbalch,1 Ann-Dorthe Zwisler4 1Department of Hematology, Zealand University Hospital, University of Copenhagen, Roskilde, 2Department of Occupational and Environmental Medicine, Bispebjerg University Hospital, Copenhagen, 3National Institute of Public Health, University of Southern Denmark, Copenhagen, 4Danish Knowledge Centre for Rehabilitation and Palliative Care, University of Southern Denmark and Odense University Hospital, Odense, Denmark Objective: The Department of Hematology, Zealand University Hospital, Denmark, and the National Institute of Public Health, University of Southern Denmark, created the first nationwide, population-based, and the most comprehensive cross-sectional health-related quality of life (HRQoL survey of patients with myeloproliferative neoplasms (MPNs. In Denmark, all MPN patients are treated in public hospitals and treatments received are free of charge for these patients. Therefore, MPN patients receive the best available treatment to the extent of its suitability for them and if they wish to receive the treatment. The aims of this article are to describe the survey design and the characteristics of respondents and nonrespondents. Material and methods: Individuals with MPN diagnoses registered in the Danish National Patient Register (NPR were invited to participate. The registers of the Danish Civil Registration System and Statistics Denmark provided information regarding demographics. The survey contained 120 questions: validated patient-reported outcome (PRO questionnaires and additional questions addressing lifestyle. Results: A total of 4,704 individuals were registered with MPN diagnoses in the NPR of whom 4,236 were eligible for participation and 2,613 (62% responded. Overall, the respondents covered the broad spectrum of MPN patients, but patients 70–79 years old, living with

Report on surveys in fiscal 2000 on the survey on foundation to establish industrial technology strategy. Survey on lifetime education for mechanical engineers; 2000 nendo sangyo gijutsu senryaku sakusei kiban chosa hokokusho. Kikai gijutsusha shogai kyoiku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to set up a system for full-scale lifetime education, a feasibility study has been performed on preparing new educational materials and performing seminars. The continuing education program developed by the Japan Society of Mechanical Engineers is intended to assist engineers studied under the new engineer system to accumulate actual work experience after having acquired the qualification, and motivate ability maintenance and self-enlightenment after having acquired the engineer qualification, mainly through the training meetings and lecture meetings held by the Japan Society of Mechanical Engineers. The education items in the major field course include dynamics of materials and machines, energy and flow, information and control, and design and production. The items in the general common course include presentation and communication, kinetics learned from actual cases, engineer ethics, product liability and product safety. The seminar was held for two days for engineers graduated from undergraduate departments and experienced in actual works for two years or longer as the object. The actual status survey related to the continuing education by corporations revealed that 83% of the corporations has implemented intra-corporation training, and encouraged positive participation to outside seminars. (NEDO)

A preliminary survey of the National Wetlands Inventory as mapped for the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Hampton, N.L.; Rope, R.C.; Glennon, J.M.; Moor, K.S.

1995-02-01

Approximately 135 areas within the boundaries of the Idaho National Engineering Laboratory (INEL) have been mapped as wetland habitat as part of the United States Fish and Wildlife Service (FWS) National Wetlands Inventory (NWI). A preliminary survey of these wetlands was conducted to examine their general characteristics and status, to provide an estimation of relative ecological importance, to identify additional information needed to complete ecological characterization of important INEL wetlands, and to identify high priority wetland areas on the INEL. The purpose of the survey was to provide information to support the preparation of the Environmental Restoration and Waste Management (ER ampersand WM) Environmental Impact Statement (EIS). Information characterizing general vegetation, hydrology, wildlife use, and archaeology was collected at 105 sample sites on the INEL. Sites representing NWI palustrine, lacustrine, and riverine wetlands (including manmade), and areas unmapped or unclassified by the NWI were included in the sample. The field information was used to develop a preliminary ranking of relative ecological importance for each wetland visited during this survey. Survey limitations are identified

Perspectives on Oral Communication Skills for Engineers in Engineering Profession of Pakistan

Directory of Open Access Journals (Sweden)

Inayatullah Kakepoto

2012-09-01

Full Text Available Communication plays paramount role for engineers to perform workplace jobs effectively in this modern age of industrialization. The purpose of this research paper was to determine importance of oral communication for engineers at workplace. Thirty engineers from 2 engineering organizations participated in this study. Purposive sampling method was used for data collection since respondents were drawn on specific criteria of engineers with minimum 5 years work experience. Quantitative survey based on questionnaire survey was used for data collection purpose. Data were analyzed using Statistical Package for Social Sciences (SPSS 15.0. The results of the study indicated that oral communication skills such as oral presentation, participation in meetings, conversation, discussion, and negotiation skill play significant role for engineers at workplace. Thus, quantitative data analysis results indicate that oral communication skills play significant role for engineers to perform workplace jobs efficiently in this competitive work environment of organizations. However, the results of this study are consistent with other literature review findings on importance of oral communication skills for engineers at workplace.

Experimental engineering section off-gas decontamination facility's fractionator column: installation and performance

International Nuclear Information System (INIS)

Gilliam, T.M.; Fowler, V.L.; Inman, D.J.

1978-03-01

A detailed description of the third column recently installed in the Experimental Engineering Section Off-Gas Decontamination Facility (EES-ODF) is presented. The EES-ODF is being used to provide engineering-scale experiments (nominal gas and liquid flows of 5 scfm and 0.5 gpm, respectively) in the development of the Krypton Absorption in Liquid CO 2 (KALC) process. A detailed discussion of the column's construction is provided. This discussion includes the peripherals associated with the column, such as refrigeration, heat exchangers, instrumentation, etc. The compressibility of Goodloe packing (the packing in the other columns) and the possible reduced throughput due to this compression have revealed the desirablility of a random (i.e., noncompressible) packing. Toward this end, the third column is packed with a new random packing (PRO-PAK). A preliminary comparison between this packing and the woven wire mesh packing (Goodloe) used in the other two columns has been made. Experiments comparing the throughput capacity indicate that the PRO-PAK packing has approximately 60% the capacity of Goodloe for a CO 2 system. When used as a fractionator or stripper with the basic O 2 -Kr-CO 2 KALC system, the PRO-PAK column produced HTU values less than or equal to the GOODLOE columns under similar operating conditions

Burnout among public doctors in Hong Kong: cross-sectional survey.

Science.gov (United States)

Siu, Christina F Y; Yuen, S K; Cheung, Andy

2012-06-01

The stressful life of doctors makes them prone to burnout. We evaluated the prevalence of burnout among Hong Kong public hospital doctors and correlated burnout with job characteristics, working hours, stressors, and stress-relieving strategies. Cross-sectional survey. Hong Kong. One thousand doctors were randomly sampled from the Hong Kong Public Doctors' Association registry. Self-administered, anonymous questionnaires with postage-paid envelopes were mailed twice in early 2009. The Maslach Burnout Inventory-Human Services Survey was used for burnout assessment. According to this scale, burnout is defined as emotional exhaustion, depersonalisation, and a reduced sense of personal accomplishment. Correlation analysis, as well as univariate and multivariate analyses, were performed to assess factors associated with high degrees of burnout. RESULTS. A total of 226 questionnaires were analysed, of which 31.4% of the respondents satisfied the criteria for high burnout. They were younger and needed to work shifts, and their median year of practice was 8.5. High-burnout doctors worked similar hours per week to non-high-burnout doctors (mean ± standard deviation, 56.2 ± 12.7 vs 54.7 ± 10.9; P=0.413) and reported suicidal thoughts more often (9.9% vs 2.6%; P=0.033). Moreover, 52.2% of high-burnout doctors were dissatisfied or very dissatisfied with their jobs. 'Excessive stress due to global workload' and 'feeling that their own work was not valued by others' were the most significant stressors associated with high emotional exhaustion and depersonalisation, while 'feeling that their own work was not valued by others' and 'poor job security' correlated with low personal accomplishment. A high proportion of public doctors who responded to our survey endured high burnout. Trainees with some experience were at heightened risk. Stressors identified in this study should be addressed, so as to improve job satisfaction.

40 CFR 1054.140 - What is my engine's maximum engine power and displacement?

Science.gov (United States)

2010-07-01

... internal diameter of 6.00 cm and a 6.25 cm stroke length, the rounded displacement would be: (1) × (6.00/2... power and displacement? 1054.140 Section 1054.140 Protection of Environment ENVIRONMENTAL PROTECTION... engine power and displacement? This section describes how to quantify your engine's maximum engine power...

Report on the Results of the 1988 Survey of Former Biomedical Engineering Technology Students. Research Report Number 56.

Science.gov (United States)

Livieratos, Barbara B.

In spring 1988, a telephone survey was conducted of students who had been enrolled in Howard Community College's (HCC's) Biomedical Engineering Technology (BMET) program between 1972 and 1987. The study sought to gather information for future student recruitment and program planning efforts. Responses were obtained from 43 (35%) of a potential…

Do teachers have more health problems? Results from a French cross-sectional survey

OpenAIRE

Kovess-Masféty, Viviane; Sevilla-Dedieu, Christine; Rios-Seidel, Carmen; Nerrière, Eléna; Chan Chee, Christine

2006-01-01

Abstract Background Although only a few studies have been published on teachers' health, certain ideas are widely accepted, such as for example, the preconceived notion that teachers suffer from an excessively high rate of mental health problems. The objective of this study is to compare teachers' mental and physical health to that of a control group. Methods A cross-sectional postal survey was conducted among a sample of 3,679 teachers and 1,817 non-teachers aged 20 to 60 years old. Results ...

Bullying in the American Graduate Medical Education System: A National Cross-Sectional Survey

Science.gov (United States)

2016-01-01

Objectives To deliver an estimate of bullying among residents and fellows in the United States graduate medical education system and to explore its prevalence within unique subgroups. Design/Setting/Participants A national cross-sectional survey from a sample of residents and fellows who completed an online bullying survey conducted in June 2015. The survey was distributed using a chain sampling method that relied on electronic referrals from 4,055 training programs, with 1,791 residents and fellows completing the survey in its entirety. Survey respondents completed basic demographic and programmatic information plus four general bullying and 20 specific bullying behavior questions. Between-group differences were compared for demographic and programmatic stratifications. Main Outcomes/Measures Self-reported subjected to workplace bullying from peers, attendings, nurses, ancillary staff, or patients in the past 12 months. Results Almost half of the respondents (48%) reported being subjected to bullying although both those subjected and not subjected reported experiencing ≥ 1 bullying behaviors (95% and 39% respectively). Attendings (29%) and nurses (27%) were the most frequently identified source of bullying, followed by patients, peers, consultants and staff. Attempts to belittle and undermine work and unjustified criticism and monitoring of work were the most frequently reported bullying behaviors (44% each), followed by destructive innuendo and sarcasm (37%) and attempts to humiliate (32%). Specific bullying behaviors were more frequently reported by female, non-white, shorter than bullying in the United States graduate medical education programs. Including specific questions on bullying in the Accreditation Council for Graduate Medical Education annual resident/fellow survey, implementation of anti-bullying policies, and a multidisciplinary approach engaging all stakeholders may be of great value to eliminate these pervasive behaviors in the field of

Bullying in the American Graduate Medical Education System: A National Cross-Sectional Survey.

Directory of Open Access Journals (Sweden)

Amar R Chadaga

Full Text Available To deliver an estimate of bullying among residents and fellows in the United States graduate medical education system and to explore its prevalence within unique subgroups.A national cross-sectional survey from a sample of residents and fellows who completed an online bullying survey conducted in June 2015. The survey was distributed using a chain sampling method that relied on electronic referrals from 4,055 training programs, with 1,791 residents and fellows completing the survey in its entirety. Survey respondents completed basic demographic and programmatic information plus four general bullying and 20 specific bullying behavior questions. Between-group differences were compared for demographic and programmatic stratifications.Self-reported subjected to workplace bullying from peers, attendings, nurses, ancillary staff, or patients in the past 12 months.Almost half of the respondents (48% reported being subjected to bullying although both those subjected and not subjected reported experiencing ≥ 1 bullying behaviors (95% and 39% respectively. Attendings (29% and nurses (27% were the most frequently identified source of bullying, followed by patients, peers, consultants and staff. Attempts to belittle and undermine work and unjustified criticism and monitoring of work were the most frequently reported bullying behaviors (44% each, followed by destructive innuendo and sarcasm (37% and attempts to humiliate (32%. Specific bullying behaviors were more frequently reported by female, non-white, shorter than < 5'8 and BMI ≥ 25 individuals.Many trainees report experiencing bullying in the United States graduate medical education programs. Including specific questions on bullying in the Accreditation Council for Graduate Medical Education annual resident/fellow survey, implementation of anti-bullying policies, and a multidisciplinary approach engaging all stakeholders may be of great value to eliminate these pervasive behaviors in the field of

A survey of visual preprocessing and shape representation techniques

Science.gov (United States)

Olshausen, Bruno A.

1988-01-01

Many recent theories and methods proposed for visual preprocessing and shape representation are summarized. The survey brings together research from the fields of biology, psychology, computer science, electrical engineering, and most recently, neural networks. It was motivated by the need to preprocess images for a sparse distributed memory (SDM), but the techniques presented may also prove useful for applying other associative memories to visual pattern recognition. The material of this survey is divided into three sections: an overview of biological visual processing; methods of preprocessing (extracting parts of shape, texture, motion, and depth); and shape representation and recognition (form invariance, primitives and structural descriptions, and theories of attention).

Report on survey in fiscal 2000. Survey on introduction of external accreditation system in engineer education - iron and steel (Survey on education accreditation in material field); 2000 nendo chosa hokokusho. Gijutsusha kyoiku no gaibu ninteiseido donyu ni kansuru chosa (tekko) -Zairyo bunya ni okeru kyoiku nintei ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In order to ensure international applicability of engineer education such as in universities and other organizations, and to improve the environment to supply human resources demanded by economic societies, a survey was performed on external accreditation systems for engineer education such as in universities and other organizations in the material field. In the survey, discussions were given on whether or not the education program accreditation system for the material field being structured has any problem in the actual operation of the accreditation through trials at Chiba Engineering University and Tokai University. As a result, it was revealed that the criteria are too general, requiring more detailed description on the guideline, and criteria should be so considered that assessment at higher levels can be given to the graduation research, which is a Japan's particular education system. In addition, it was made clear as a problem in the education programming side that a room for improvement remains in the education methods for the engineering ethics, communication skills, and the method for evaluating the students' achievements. In the survey on the methods for examination and accreditation in the U.S.A. it was found out that education organizations are perplexed with the new criteria of EC 2000. (NEDO)

Cross-sectional prospective survey to study indication-based usage of antimicrobials in animals: Results of use in cattle

OpenAIRE

Thomson, Katariina; Rantala, Merja; Hautala, Maria; Pyörälä, Satu; Kaartinen, Liisa

2008-01-01

Abstract Background Indication-based data on the use of antimicrobials in animals were collected using a prospective cross-sectional survey, similarly as for surveys carried out in human medicine, but adapting the questionnaire to include veterinary-specific issues. The participating veterinarians were randomly selected from a sample population of practising veterinarians. The sampling was stratified to take into account the proportions of different types of veterinary practice in the country...

Perspectives on Oral Communication Skills for Engineers in Engineering Profession of Pakistan

OpenAIRE

Inayatullah Kakepoto; Noor Abidah Mohd Omar; Yusuf Boon; S M Zafar Iqbal

2012-01-01

Communication plays paramount role for engineers to perform workplace jobs effectively in this modern age of industrialization. The purpose of this research paper was to determine importance of oral communication for engineers at workplace. Thirty engineers from 2 engineering organizations participated in this study. Purposive sampling method was used for data collection since respondents were drawn on specific criteria of engineers with minimum 5 years work experience. Quantitative survey ba...

The Generalized Principle of the Golden Section and its applications in mathematics, science, and engineering

International Nuclear Information System (INIS)

Stakhov, A.P.

2005-01-01

The 'Dichotomy Principle' and the classical 'Golden Section Principle' are two of the most important principles of Nature, Science and also Art. The Generalized Principle of the Golden Section that follows from studying the diagonal sums of the Pascal triangle is a sweeping generalization of these important principles. This underlies the foundation of 'Harmony Mathematics', a new proposed mathematical direction. Harmony Mathematics includes a number of new mathematical theories: an algorithmic measurement theory, a new number theory, a new theory of hyperbolic functions based on Fibonacci and Lucas numbers, and a theory of the Fibonacci and 'Golden' matrices. These mathematical theories are the source of many new ideas in mathematics, philosophy, botanic and biology, electrical and computer science and engineering, communication systems, mathematical education as well as theoretical physics and physics of high energy particles

Sandia National Laboratories, California proposed CREATE facility environmental baseline survey.

Energy Technology Data Exchange (ETDEWEB)

Catechis, Christopher Spyros

2013-10-01

Sandia National Laboratories, Environmental Programs completed an environmental baseline survey (EBS) of 12.6 acres located at Sandia National Laboratories/California (SNL/CA) in support of the proposed Collaboration in Research and Engineering for Advanced Technology and Education (CREATE) Facility. The survey area is comprised of several parcels of land within SNL/CA, County of Alameda, California. The survey area is located within T 3S, R 2E, Section 13. The purpose of this EBS is to document the nature, magnitude, and extent of any environmental contamination of the property; identify potential environmental contamination liabilities associated with the property; develop sufficient information to assess the health and safety risks; and ensure adequate protection for human health and the environment related to a specific property.

40 CFR 1033.130 - Instructions for engine remanufacturing or engine installation.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Instructions for engine remanufacturing or engine installation. 1033.130 Section 1033.130 Protection of Environment ENVIRONMENTAL... and Related Requirements § 1033.130 Instructions for engine remanufacturing or engine installation. (a...

CHEMICAL ENGINEERING DIVISION BURNUP, CROSS SECTIONS, AND DOSIMETRY SEMIANNUAL REPORT, JANUARY--JUNE 1972.

Energy Technology Data Exchange (ETDEWEB)

Larsen, R P; Dudey, N D; Crouthamel, C E; Tevebaugh, A D; Levenson, M; Vogel, R C

1972-09-01

Research and development efforts of the burnup, cross sections and dosimetry programs in the Chemical Engineering Division of Argonne National Laboratory are reported for the period January to June 1972. Work is reported in the following areas: (1) development of an X-ray spectrometric method for the determination of the rare-earth fission products and application of this method to the determinations of burnup in nuclear fuels; (2) determination of fast ·fission yields of bum up monitors and other fission products; (3) a search for a spon~aneously fissioning isomer of {sup 241}Pu; (4) measurements of the tritium and alpha particle yields in fast-neutron fission of {sup 235}U and {sup 239}Pu; (5) evaluations of available data on the differential cross sections for the {sup 56}Fe(n,p){sup 56}Mn and {sup 32}S(n,p){sup 32}P reactions; and (6) measurements of both fission rates by solid-state track recorders and reaction rates by foil activation, in the Coupled Fast Reactivity Measurement Facility.

Attitudes toward plagiarism among pharmacy and medical biochemistry students – cross-sectional survey study

OpenAIRE

Pupovac, Vanja; Bilic-Zulle, Lidija; Mavrinac, Martina; Petrovecki, Mladen

2010-01-01

Introduction: Plagiarism is one of the most frequent and serious forms of misconduct in academic environment. The cross-sectional survey study was done with aim to explore the attitudes toward plagiarism. Materials and methods: First year students of Faculty of Pharmacy and Medical Biochemistry, University of Zagreb, Croatia (N = 146) were anonymously tested using Attitude toward Plagiarism (ATP) questionnaire. The questionnaire is composed of 29 statements on a 5 point Likert scale, (1 - ...

Report on survey in fiscal 2000. Survey on introduction of external accreditation system in engineer education (information); 2000 nendo chosa hokokusho. Gijutsusha kyoiku no gaibu ninteiseido donyu ni kansuru chosa (Joho)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In order to ensure international applicability of engineer education such as in universities and other organizations, and to improve the environment to supply human resources demanded by economic societies, surveys and discussions were performed on the external accreditation system for engineer education such as in universities and other organizations. In the survey on the information field, a trial was attempted on the information related course at Kyoto University and Osaka University based on the accreditation criteria discussed with an objective of establishing the external accreditation system. The trial was performed on computer science for Kyoto University and software engineering for Osaka University. The activity has provided the examiner side with an opportunity to actually experience the accreditation work, and the examiners had a feeling that the work can help improve the education. The side receiving the accreditation indicated problems in the present system including the concern about the system becoming a mere shell. In addition, participation in the accreditation examiner training work for the information field in the U.S.A. has provided useful information such as thoroughgoing observation of the duty of confidentiality. (NEDO)

A method of encountering the ratio of adjacent sides and its applied study in nuclear engineering survey

International Nuclear Information System (INIS)

Wu Jingqin

1996-01-01

The cross side or range net survey method is to compute the average error of the measured lengths of sides. With the increment of the side length, the viewing variance increases greatly. Generally the photo-electrical distance survey equipment has a high inside precision, but it is affected by typical weather error so that the outside precision is decreased, and this weather error similar to systematic error greatly decreases the viewing side precision. To solve this problem, theoretical study and field test were carried out for the correlation of ratios among short sides by photo-electrical survey, and the stability degree of the ratios of sides, a new method of ratio encountering of adjacent sides is put forward. Because of the weights of the ration variance σ γ 2 = 2η 2 γ 2 and the angular variance σ β 2 = 2J 2 ρ 2 match each other, so the systematic error can be eliminated completely, and a survey point co-ordinate of high precision can be obtained. It is easy to operate, as it does not require multi-photo-band survey or to operate at the optimal observation time, and is especially suitable to nuclear engineering survey applications. (3 tabs.)

Survey of control-room design practices with respect to human factors engineering

International Nuclear Information System (INIS)

Seminara, J.L.; Parsons, S.O.

1980-01-01

Human factors engineering is an interdisciplinary speciality concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. This emphasis has been applied to most military and space systems in the past 30 y. A review of five nuclear power-plant control rooms, reported in the November-December 1977 issue of Nuclear Safety, revealed that human factors principles of design have generally not been incorporated in present-generation control rooms. This article summarizes the findings of a survey of 20 control-board designers from a mix of nuclear steam-supply system and architect-engineering firms. The interviews with these designers probed design methods currently used in developing control rooms. From these data it was concluded that there is currently no consistent, formal, uniform concern for the human factors aspects of control-room design on the part of the design organizations, the utilities, or the Nuclear Regulatory Commission. Although all the parties involved are concerned with human factors issues, this responsibility is not focused, and human factors yardsticks, or design standards, specific to power plants have not been evolved and applied in the development and verification of control-room designs from the standpoint of the man-machine interface

[Attendance for Using Internet-Based Support After Inpatient Treatment - A Cross-Sectional Survey].

Science.gov (United States)

Frank, Fabian; Gräder, Nicola; Dahlmann, Hannah; Berger, Mathias; Hölzel, Lars

2018-05-01

Examination of the attendance for using internet-based measures after inpatient treatment. Cross-sectional-survey in former inpatients (N = 247). 44.9 % are willing to use measures via videoconference, 34.7 % via Chat, 50.0 % via E-Mail and 38.0 % as onlinetherapy. Attendance is lower in older age groups. Benefits regarding the introduced measures are seen mainly in the flexibility and disadvantages in the impersonal character. A relevant share of especially younger patients is willing to use internet-based measures. © Georg Thieme Verlag KG Stuttgart · New York.

A survey investigation of UK physiotherapists' use of online search engines for continuing professional development.

Science.gov (United States)

Harland, Nicholas; Drew, Benjamin T

2013-09-01

The purpose of this study was to discover the frequency and type of use of online resources for continuing professional development displayed by physiotherapists in the UK. Therapists' skills, needs and frustrations using these resources were explored. With the relatively recent release and saturated use of the internet the potential presence of a skills gap between therapists at different stages of their career was also investigated. National online survey study. The online survey was carried out using the international online service 'Survey Monkey'. 774 physiotherapists from students to band 8c completed the survey. The online survey was advertised through Frontline, the Interactive Chartered Society of Physiotherapy, Journal of Physiotherapy Pain Association and cascade email through research and other networks. Most physiotherapists reported using the internet for professional purposes daily (40%) or 2 to 4 times a week (37%), with only 8% of respondents using it less than once a week. Overall the results suggest band 6 and 7 physiotherapists had the least skills and most frustrations when using online search engines. History and the nature of rapid technological advancement, specifically of the internet, appears to have created a generational skills gap within the largest group of the physiotherapy workforce band 6 and 7 therapists. Students, band 5 and band 8a therapists appear to most successfully use online resources and the reasons for this are explored. Copyright © 2012 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

GP registrar well-being: a cross-sectional survey.

Science.gov (United States)

Schattner, Peter; Mazalin, Dennis; Pier, Ciaran; Wainer, Jo; Ling, Mee Yoke

2010-02-09

To investigate the major stressors affecting GP registrars, how those at risk can be best identified and the most useful methods of managing or reducing their stress. Cross-sectional postal questionnaire of all GP registrars in one large regional training provider's catchment area. The Depression, Anxiety and Stress Scale (DASS), a specifically developed Registrar Stressor Scale consisting of five subscales of potential stressors, plus closed questions on how to identify and manage stress in GP registrars. Survey response rate of 51% (102/199). Rural difficulties followed by achieving a work/life balance were the principal stressors. Ten percent of registrars were mildly or moderately depressed or anxious (DASS) and 7% mild to moderately anxious (DASS). Registrars preferred informal means of identifying those under stress (a buddy system and talks with their supervisors); similarly, they preferred to manage stress by discussions with family and friends, debriefing with peers and colleagues, or undertaking sport and leisure activities. This study supports research which confirms that poor psychological well-being is an important issue for a significant minority of GP trainees. Regional training providers should ensure that they facilitate formal and informal strategies to identify those at risk and assist them to cope with their stress.

Nuclear Engineering Academic Programs Survey, 2002 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2003-01-01

The survey includes degrees granted between July 1, 2001 and June 30, 2002. Enrollment information refers to the fall term 2002. Thirty-five academic programs were in the survey universe and all responded (100% response rate). One of the 35 programs reported that it was discontinued after the 2001-2002 academic year. Also, two programs were discontinued after the previous academic year (2000-2001) and were not included in 2002 survey

Experimental Engineering Section semiannual progress report, March 1-August 31, 1976. Volume 2. Biotechnology and environmental programs

Energy Technology Data Exchange (ETDEWEB)

Pitt, Jr., W. W.; Mrochek, J. E. [comps.

1978-03-01

This volume contains the progress report of the biotechnology and environmental programs in the Experimental Engineering Section of the Chemical Technology Division. Research efforts in these programs during this report period have been in five areas: (1) environmental research; (2) centrifugal analyzer development; (3) advanced analytical systems development; (4) bioengineering research; and (5) bioengineering development. Summaries of these programmatic areas are contained in Volume I.

14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

Science.gov (United States)

2010-01-01

... section, may have a flight engineer certificate issued to him for the operation of civil aircraft of U.S... engineer certificate issued under this section may act as a flight engineer of a civil aircraft of U.S... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight engineer certificate issued on basis...

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 13: Source selection and information use by US aerospace engineers and scientists: Results of a telephone survey

Science.gov (United States)

Pinelli, Thomas E.; Glassman, Nanci A.

1992-01-01

A telephone survey of U.S. aerospace engineers and scientists belonging to the Society of Automotive Engineers (SAE) was conducted between December 4, 1991 and January 5, 1992. The survey was undertaken to (1) validate the telephone survey as an appropriate technique for collecting data from U.S. aerospace engineers and scientists; (2) collect information about how the results of NASA/DoD aerospace research are used in the R&D process; (3) identify those selection criteria which affect the use of federally-funded aerospace R&D; and (4) obtain information that could be used to develop a self-administered mail questionnaire for use with the same population. The average rating of importance of U.S. government technical reports was 2.5 (on a 4-point scale); The mean/median number of times U.S. government technical reports were used per 6 months was 8/2. Factors scoring highest for U.S. government technical reports were technical accuracy (2.9), reliable data and technical information (2.8), and contains comprehensive data and information (2.7) on a 4-point system. The factors scoring highest for influencing the use of U.S. government technical reports were relevance (3.1), technical accuracy (3.06), and reliable data/information (3.02). Ease of use, familiarity, technical accuracy, and relevance correlated with use of U.S. government technical reports. Survey demographics, survey questionnaire, and the NASA/DoD Aerospace Knowledge Diffusion Research Project publications list are included.

The Generalized Principle of the Golden Section and its applications in mathematics, science, and engineering

Energy Technology Data Exchange (ETDEWEB)

Stakhov, A.P. [International Club of the Golden Section, 6 McCreary Trail, Bolton, ON, L7E 2C8 (Canada)] e-mail: goldenmuseum@rogers.com

2005-10-01

The 'Dichotomy Principle' and the classical 'Golden Section Principle' are two of the most important principles of Nature, Science and also Art. The Generalized Principle of the Golden Section that follows from studying the diagonal sums of the Pascal triangle is a sweeping generalization of these important principles. This underlies the foundation of 'Harmony Mathematics', a new proposed mathematical direction. Harmony Mathematics includes a number of new mathematical theories: an algorithmic measurement theory, a new number theory, a new theory of hyperbolic functions based on Fibonacci and Lucas numbers, and a theory of the Fibonacci and 'Golden' matrices. These mathematical theories are the source of many new ideas in mathematics, philosophy, botanic and biology, electrical and computer science and engineering, communication systems, mathematical education as well as theoretical physics and physics of high energy particles.

MATERNAL AND INFANT HEALTH SECTION OF THE DEMOGRAPHIC AND HEALTH SURVEY REPORT OF GHANA

Directory of Open Access Journals (Sweden)

Samuel adu Gyamfi

2017-02-01

Full Text Available This article is basically a commentary on some sections on infant and maternal healthcare of the 2008 demographic and health survey of Ghana. The attention of both policy makers and academics are drawn to the need to ensure the expansion of the maternal and infant healthcare in Ghana. In same commentary, attention of readers have been drawn to the proclivity of the free maternal health policy to positively shape maternal and infant care in Ghana

Understanding the leaky engineering pipeline: Motivation and job adaptability of female engineers

Science.gov (United States)

Saraswathiamma, Manjusha Thekkedathu

This dissertation is a mixed-method study conducted using qualitative grounded theory and quantitative survey and correlation approaches. This study aims to explore the motivation and adaptability of females in the engineering profession and to develop a theoretical framework for both motivation and adaptability issues. As a result, this study endeavors to design solutions for the low enrollment and attenuation of female engineers in the engineering profession, often referred to as the "leaky female engineering pipeline." Profiles of 123 female engineers were studied for the qualitative approach, and 98 completed survey responses were analyzed for the quantitative approach. The qualitative, grounded-theory approach applied the constant comparison method; open, axial, and selective coding was used to classify the information in categories, sub-categories, and themes for both motivation and adaptability. The emergent themes for decisions motivating female enrollment include cognitive, emotional, and environmental factors. The themes identified for adaptability include the seven job adaptability factors: job satisfaction, risk- taking attitude, career/skill development, family, gender stereotyping, interpersonal skills, and personal benefit, as well as the self-perceived job adaptability factor. Illeris' Three-dimensional Learning Theory was modified as a model for decisions motivating female enrollment. This study suggests a firsthand conceptual parallelism of McClusky's Theory of Margin for the adaptability of female engineers in the profession. Also, this study attempted to design a survey instrument to measure job adaptability of female engineers. The study identifies two factors that are significantly related to job adaptability: interpersonal skills (related.

Environmental Restoration Project - Systems Engineering Management Plan

International Nuclear Information System (INIS)

Anderson, T.D.

1998-06-01

This Environmental Restoration (ER) Project Systems Engineering Management Plan (SEMP) describes relevant Environmental Restoration Contractor (ERC) management processes and shows how they implement systems engineering. The objective of this SEMP is to explain and demonstrate how systems engineering is being approached and implemented in the ER Project. The application of systems engineering appropriate to the general nature and scope of the project is summarized in Section 2.0. The basic ER Project management approach is described in Section 3.0. The interrelation and integration of project practices and systems engineering are outlined in Section 4.0. Integration with sitewide systems engineering under the Project Hanford Management Contract is described in Section 5.0

46 CFR 11.555 - Engineer (OSV).

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Engineer (OSV). 11.555 Section 11.555 Shipping COAST... ENDORSEMENTS Professional Requirements for Engineer Officer § 11.555 Engineer (OSV). (a) Except as provided by paragraph (b) of this section, to qualify for an endorsement as Engineer (OSV), an applicant shall present...

Engineering derivatives from biological systems for advanced aerospace applications

Science.gov (United States)

Winfield, Daniel L.; Hering, Dean H.; Cole, David

1991-01-01

The present study consisted of a literature survey, a survey of researchers, and a workshop on bionics. These tasks produced an extensive annotated bibliography of bionics research (282 citations), a directory of bionics researchers, and a workshop report on specific bionics research topics applicable to space technology. These deliverables are included as Appendix A, Appendix B, and Section 5.0, respectively. To provide organization to this highly interdisciplinary field and to serve as a guide for interested researchers, we have also prepared a taxonomy or classification of the various subelements of natural engineering systems. Finally, we have synthesized the results of the various components of this study into a discussion of the most promising opportunities for accelerated research, seeking solutions which apply engineering principles from natural systems to advanced aerospace problems. A discussion of opportunities within the areas of materials, structures, sensors, information processing, robotics, autonomous systems, life support systems, and aeronautics is given. Following the conclusions are six discipline summaries that highlight the potential benefits of research in these areas for NASA's space technology programs.

An Exploratory Survey of Student Perspectives Regarding Search Engines

Science.gov (United States)

Alshare, Khaled; Miller, Don; Wenger, James

2005-01-01

This study explored college students' perceptions regarding their use of search engines. The main objective was to determine how frequently students used various search engines, whether advanced search features were used, and how many search engines were used. Various factors that might influence student responses were examined. Results showed…

46 CFR 119.420 - Engine cooling.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Engine cooling. 119.420 Section 119.420 Shipping COAST... Machinery Requirements § 119.420 Engine cooling. (a) Except as otherwise provided in paragraph (b) of this section, all engines must be water cooled and meet the requirements of this paragraph. (1) The engine head...

The relevance of surveying content in mining engineering education ...

African Journals Online (AJOL)

The University of the Witwatersrand School of Mining Engineering (Wits Mining) has its origins in the South African School of Mines, which was established in 1896. It is currently recognised as one of the world's top mining engineering schools that educate mining engineering candidates to become qualified to specialise in ...

Occupational exposure to diesel engine exhaust and alterations in immune/inflammatory markers : a cross-sectional molecular epidemiology study in China

NARCIS (Netherlands)

Bassig, Bryan A.; Dai, Yufei; Vermeulen, Roel; Ren, Dianzhi; Hu, Wei; Duan, Huawei; Niu, Yong; Xu, Jun; Shiels, Meredith S; Kemp, Troy J; Pinto, Ligia A; Fu, Wei; Meliefste, Kees; Zhou, Baosen; Yang, Jufang; Ye, Meng; Jia, Xiaowei; Meng, Tao; Wong, Jason Y Y; Li, Ping; Hosgood, H. Dean; Hildesheim, Allan; Silverman, Debra T.; Rothman, Nathaniel; Zheng, Yuxin; Lan, Qing

2017-01-01

The relationship between diesel engine exhaust (DEE), a known lung carcinogen, and immune/inflammatory markers that have been prospectively associated with lung cancer risk is not well understood. To provide insight into these associations, we conducted a cross-sectional molecular epidemiology study

WHO Global Survey on Maternal and Perinatal Health in Latin America: classifying caesarean sections

Directory of Open Access Journals (Sweden)

Faúndes Anibal

2009-10-01

Full Text Available Abstract Background Caesarean section rates continue to increase worldwide with uncertain medical consequences. Auditing and analysing caesarean section rates and other perinatal outcomes in a reliable and continuous manner is critical for understanding reasons caesarean section changes over time. Methods We analyzed data on 97,095 women delivering in 120 facilities in 8 countries, collected as part of the 2004-2005 Global Survey on Maternal and Perinatal Health in Latin America. The objective of this analysis was to test if the "10-group" or "Robson" classification could help identify which groups of women are contributing most to the high caesarean section rates in Latin America, and if it could provide information useful for health care providers in monitoring and planning effective actions to reduce these rates. Results The overall rate of caesarean section was 35.4%. Women with single cephalic pregnancy at term without previous caesarean section who entered into labour spontaneously (groups 1 and 3 represented 60% of the total obstetric population. Although women with a term singleton cephalic pregnancy with a previous caesarean section (group 5 represented only 11.4% of the obstetric population, this group was the largest contributor to the overall caesarean section rate (26.7% of all the caesarean sections. The second and third largest contributors to the overall caesarean section rate were nulliparous women with single cephalic pregnancy at term either in spontaneous labour (group 1 or induced or delivered by caesarean section before labour (group 2, which were responsible for 18.3% and 15.3% of all caesarean deliveries, respectively. Conclusion The 10-group classification could be easily applied to a multicountry dataset without problems of inconsistencies or misclassification. Specific groups of women were clearly identified as the main contributors to the overall caesarean section rate. This classification could help health care

Construction engineering inspection direct cost survey.

Science.gov (United States)

2014-07-01

The objective of the study was to provide a rationale to Georgia Department of Transportation : (GDOT) for Direct Costs in terms of salary and wages charged by qualified independent : contractors performing Construction Engineering Inspection (CEI) s...

Industrial Education. "Small Engines".

Science.gov (United States)

Parma City School District, OH.

Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

Combustion engineering

CERN Document Server

Ragland, Kenneth W

2011-01-01

Introduction to Combustion Engineering The Nature of Combustion Combustion Emissions Global Climate Change Sustainability World Energy Production Structure of the Book   Section I: Basic Concepts Fuels Gaseous Fuels Liquid Fuels Solid Fuels Problems Thermodynamics of Combustion Review of First Law Concepts Properties of Mixtures Combustion StoichiometryChemical EnergyChemical EquilibriumAdiabatic Flame TemperatureChemical Kinetics of CombustionElementary ReactionsChain ReactionsGlobal ReactionsNitric Oxide KineticsReactions at a Solid SurfaceProblemsReferences  Section II: Combustion of Gaseous and Vaporized FuelsFlamesLaminar Premixed FlamesLaminar Flame TheoryTurbulent Premixed FlamesExplosion LimitsDiffusion FlamesGas-Fired Furnaces and BoilersEnergy Balance and EfficiencyFuel SubstitutionResidential Gas BurnersIndustrial Gas BurnersUtility Gas BurnersLow Swirl Gas BurnersPremixed-Charge Engine CombustionIntroduction to the Spark Ignition EngineEngine EfficiencyOne-Zone Model of Combustion in a Piston-...

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 27: The technical communication practices of engineering and science students: Results of the phase 3 academic surveys

Science.gov (United States)

Pinelli, Thomas E.; Barclay, Rebecca O.; Hecht, Laura M.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of engineers and science (Physics) students. The reported data were obtained from a survey of students enrolled in the College of Engineering at the University of Illinois at Urbana-Champaign, Bowling Green State University, and Texas A&M University. The survey was undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign technical reports; and foreign language (reading and speaking) skills.

BS degree in nuclear engineering or a nuclear option

International Nuclear Information System (INIS)

Williams on, T.G.

1988-01-01

Many nuclear engineering educators are concerned about the health of nuclear engineering academic departments. As part of a review of the BS nuclear engineering degree program at the University of Virginia, the authors surveyed several local utilities with operating nuclear plants about their needs for nuclear engineering graduates. The perception of many of the utility executives about a nuclear engineering degree and about a nuclear option in another engineering curriculum does not agree with the way the authors view these two degrees. The responses to two of the survey questions were of particular interest: (1) does your company have a preference between nuclear engineering graduates and graduates in other fields with a nuclear option? (2) what do you consider to be a minimum level of education in nuclear engineering for a nuclear option in mechanical engineering? All of the four utilities that were surveyed stated a preference for mechanical or electrical engineers with a nuclear option, although two indicated that there are certain jobs for which a nuclear engineering graduate is desired

GP registrar well-being: a cross-sectional survey

Directory of Open Access Journals (Sweden)

Schattner Peter

2010-02-01

Full Text Available Abstract Objectives To investigate the major stressors affecting GP registrars, how those at risk can be best identified and the most useful methods of managing or reducing their stress. Design, setting and participants Cross-sectional postal questionnaire of all GP registrars in one large regional training provider's catchment area. Main outcome measures The Depression, Anxiety and Stress Scale (DASS, a specifically developed Registrar Stressor Scale consisting of five subscales of potential stressors, plus closed questions on how to identify and manage stress in GP registrars. Results Survey response rate of 51% (102/199. Rural difficulties followed by achieving a work/life balance were the principal stressors. Ten percent of registrars were mildly or moderately depressed or anxious (DASS and 7% mild to moderately anxious (DASS. Registrars preferred informal means of identifying those under stress (a buddy system and talks with their supervisors; similarly, they preferred to manage stress by discussions with family and friends, debriefing with peers and colleagues, or undertaking sport and leisure activities. Conclusions This study supports research which confirms that poor psychological well-being is an important issue for a significant minority of GP trainees. Regional training providers should ensure that they facilitate formal and informal strategies to identify those at risk and assist them to cope with their stress.

Environmental Survey preliminary report, Idaho National Engineering Laboratory, Idaho Falls, Idaho and Component Development and Integration Facility, Butte, Montana

International Nuclear Information System (INIS)

1988-09-01

This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Idaho National Engineering Laboratory (INEL) and Component Development and Integration Facility (CDIF), conducted September 14 through October 2, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the INEL and CDIF. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations' carried on at the INEL and the CDIF, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S ampersand A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S ampersand A Plan will be executed by the Oak Ridge National Laboratory. When completed, the S ampersand A results will be incorporated into the INEL/CDIF Survey findings for inclusion into the Environmental Survey Summary Report. 90 refs., 95 figs., 77 tabs

Environmental Survey preliminary report, Idaho National Engineering Laboratory, Idaho Falls, Idaho and Component Development and Integration Facility, Butte, Montana

Energy Technology Data Exchange (ETDEWEB)

1988-09-01

This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Idaho National Engineering Laboratory (INEL) and Component Development and Integration Facility (CDIF), conducted September 14 through October 2, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the INEL and CDIF. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations' carried on at the INEL and the CDIF, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S A Plan will be executed by the Oak Ridge National Laboratory. When completed, the S A results will be incorporated into the INEL/CDIF Survey findings for inclusion into the Environmental Survey Summary Report. 90 refs., 95 figs., 77 tabs.

Three-Dimensional Human Cardiac Tissue Engineered by Centrifugation of Stacked Cell Sheets and Cross-Sectional Observation of Its Synchronous Beatings by Optical Coherence Tomography.

Science.gov (United States)

Haraguchi, Yuji; Hasegawa, Akiyuki; Matsuura, Katsuhisa; Kobayashi, Mari; Iwana, Shin-Ichi; Kabetani, Yasuhiro; Shimizu, Tatsuya

2017-01-01

Three-dimensional (3D) tissues are engineered by stacking cell sheets, and these tissues have been applied in clinical regenerative therapies. The optimal fabrication technique of 3D human tissues and the real-time observation system for these tissues are important in tissue engineering, regenerative medicine, cardiac physiology, and the safety testing of candidate chemicals. In this study, for aiming the clinical application, 3D human cardiac tissues were rapidly fabricated by human induced pluripotent stem (iPS) cell-derived cardiac cell sheets with centrifugation, and the structures and beatings in the cardiac tissues were observed cross-sectionally and noninvasively by two optical coherence tomography (OCT) systems. The fabrication time was reduced to approximately one-quarter by centrifugation. The cross-sectional observation showed that multilayered cardiac cell sheets adhered tightly just after centrifugation. Additionally, the cross-sectional transmissions of beatings within multilayered human cardiac tissues were clearly detected by OCT. The observation showed the synchronous beatings of the thicker 3D human cardiac tissues, which were fabricated rapidly by cell sheet technology and centrifugation. The rapid tissue-fabrication technique and OCT technology will show a powerful potential in cardiac tissue engineering, regenerative medicine, and drug discovery research.

46 CFR 11.553 - Chief Engineer (OSV).

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Chief Engineer (OSV). 11.553 Section 11.553 Shipping... OFFICER ENDORSEMENTS Professional Requirements for Engineer Officer § 11.553 Chief Engineer (OSV). (a) Except as provided by paragraph (b) of this section, to qualify for an endorsement as Chief engineer (OSV...

Engineering mathematics

CERN Document Server

Stroud, K A

2013-01-01

A groundbreaking and comprehensive reference that's been a bestseller since it first debuted in 1970, the new seventh edition of Engineering Mathematics has been thoroughly revised and expanded. Providing a broad mathematical survey, this innovative volume covers a full range of topics from the very basic to the advanced. Whether you're an engineer looking for a useful on-the-job reference or want to improve your mathematical skills, or you are a student who needs an in-depth self-study guide, Engineering Mathematics is sure to come in handy time and time again.

Precision surveying the principles and geomatics practice

CERN Document Server

Ogundare, John Olusegun

2016-01-01

A comprehensive overview of high precision surveying, including recent developments in geomatics and their applications This book covers advanced precision surveying techniques, their proper use in engineering and geoscience projects, and their importance in the detailed analysis and evaluation of surveying projects. The early chapters review the fundamentals of precision surveying: the types of surveys; survey observations; standards and specifications; and accuracy assessments for angle, distance and position difference measurement systems. The book also covers network design and 3-D coordinating systems before discussing specialized topics such as structural and ground deformation monitoring techniques and analysis, mining surveys, tunneling surveys, and alignment surveys. Precision Surveying: The Principles and Geomatics Practice: * Covers structural and ground deformation monitoring analysis, advanced techniques in mining and tunneling surveys, and high precision alignment of engineering structures *...

The surveys to the companies: A tool for the improvement of degrees

Directory of Open Access Journals (Sweden)

Montserrat Cruells Cadevall

2017-03-01

Full Text Available In scientific and technical degrees, the opinion of the final employers on the given subjects is really important. For this reason, the Quality Committee (CQ of the Faculty of Chemistry of the University of Barcelona prepared a survey for chemical, engineering and pharmaceutical companies asking about the academic training required by the companies. The survey consists of nine sections including items related to laboratory operations, chemical processes, calculation methods, management systems (quality, environment and safety or general management information. In addition, at the end of each section, a question inquires the companies about the competences shown by students in the items of the section. The results were compared with that of a similar survey carried out in 2007. The scores obtained, between 2 and 3, for all the items (score: 1, not important; 2, unimportant; 3, important; 4, very important, show that companies accept the training given to our students and the competences achieved by them. However, according to their opinion, it is possible to improve this training, especially in the subjects related to management (time, information, environment, quality, safety, etc.. Therefore, surveys are a good tool for the evaluation of the training achieved in our degrees and, consequently, for improving degrees and the teaching task, according the Quality Management System implemented in the Faculty of Chemistry.

46 CFR 182.420 - Engine cooling.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Engine cooling. 182.420 Section 182.420 Shipping COAST...) MACHINERY INSTALLATION Specific Machinery Requirements § 182.420 Engine cooling. (a) Except as otherwise provided in paragraphs (b), (c), (d), and (e) of this section, all engines must be water cooled and meet...

The relationship between gambling expenditure, socio-demographics, health-related correlates and gambling behavioura cross-sectional population-based survey in Finland

OpenAIRE

Castren, Sari; Kontto, Jukka; Alho, Hannu; Salonen, Anne H.

2018-01-01

Abstract Aims To investigate gambling expenditure and its relationship with socio‐demographics, health‐related correlates and past‐year gambling behaviour. Design Cross‐sectional population survey. Setting Population‐based survey in Finland. Participants Finnish people aged 15–74 years drawn randomly from the Population Information System. The participants in this study were past‐year gamblers with gambling expenditure data available (n = 3251, 1418 women and 1833 men). Measurements Expenditu...

Mental health associations with eczema, asthma and hay fever in children:a cross-sectional survey

OpenAIRE

Hammer-Helmich, Lene; Linneberg, Allan; Obel, Carsten; Thomsen, Simon Francis; Tang Møllehave, Line; Glümer, Charlotte

2016-01-01

Objective This study aimed to examine the association of eczema, asthma and hay fever with mental health in a general child population and to assess the influence of parental socioeconomic position on these associations. Methods We conducted a cross-sectional health survey of children aged 3, 6, 11 and 15?years in the City of Copenhagen, Denmark. Individual questionnaire data on eczema, asthma, and hay fever and mental health problems assessed using the Strengths and Difficulties Questionnair...

An Experiment in Integrating an Engineering Communication Toolkit into the Industrial Engineering Curriculum

Science.gov (United States)

2011-01-31

A recent survey on the working habits of professional engineers found that nearly 2/3 of their day is spent communicating with others, while only 1/3 is spent on tasks commonly associated with engineering (Sageev & Romanowski, 2001). Whether it is fa...

1993 US petroleum engineering manpower supply and demand

International Nuclear Information System (INIS)

Wattenbarger, R.A.; Morriss, S.

1994-01-01

Each year, the SPE Manpower Committee reports on the results of petroleum engineering manpower supply and demand surveys to inform SPE members about hiring patterns of engineers in the petroleum industry and the supply of graduates from US petroleum engineering schools. The SPE Manpower Committee's US surveys show that large companies will decrease their hiring while small companies and service companies will increase their hiring of engineers. During 1992--93, only about 65% of graduating petroleum engineering students were known to have jobs. Another finding is that, overall, new US SPE membership is decreasing while non-US membership is increasing

Queer in STEM: Workplace Experiences Reported in a National Survey of LGBTQA Individuals in Science, Technology, Engineering, and Mathematics Careers.

Science.gov (United States)

Yoder, Jeremy B; Mattheis, Allison

2016-01-01

A survey of individuals working in science, technology, engineering, and mathematics (STEM) fields who identify as lesbian, gay, bisexual, trans*, queer, or asexual (LGTBQA) was administered online in 2013. Participants completed a 58-item questionnaire to report their professional areas of expertise, levels of education, geographic location, and gender and sexual identities and rated their work and social communities as welcoming or hostile to queer identities. An analysis of 1,427 responses to this survey provided the first broad portrait of this population, and it revealed trends related to workplace practices that can inform efforts to improve queer inclusivity in STEM workplaces.

Cumulative abstracts of Cryogenic Technology Section proceedings of the Meeting on Engineering and Technology in Basic Research 1982-2003

International Nuclear Information System (INIS)

Ikeda, Hiroshi

2005-01-01

The Cryogenic Technology Section in the Meeting on Engineering and Technology in Basic Research had been held by Institute of Molecular Science, Plasma Research Center and KEK since 1976. The abstracts of papers and reports read in the meeting on engineering and technology in basic research from 1982 to 2003 are classified by five parts. The first part includes 22 papers on automation system; the second part contains 17 papers on cryostat production; the third part 31 papers on peripheral device; the forth 23 papers on production of cryogenic device and the fifth 18 papers on repair and management of cryogenic device. Further information is able to be obtained by each homepage. (S.Y.)

Ecological Engineering and Civil Engineering works

NARCIS (Netherlands)

Van Bohemen, H.D.

2004-01-01

This thesis provides a survey of the research results of the relationship between on the one hand the construction, management and maintenance of civil engineering works, and on the other hand the environment, nature and landscape, with the main focus on motorways and coastal protection. The growing

Riser equipment decontamination engineering task plan

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

On October 15, 1998, two Characterization Project Operations (CPO) employees were found to have contaminated clothing. An operator had 300,000-dpm/100cm2 beta/gamma, no alpha, contamination on his coat sleeve and a Radiation Control Technician (RCT) had 10,000 dpm/100cm2 beta/gamma, no alpha, on his shirt sleeve. The CPO swing shift crew was working in TX tank farm, performing sampling activities at 241-TX-113. TX tank farm is a ''clean farm'' and does not require anti-contamination clothing for entry. The CPO personnel were dressed in normal work clothes. An operator and an RCT were performing a pre-job survey that involved removing bagging around the riser equipment. When the RCT saw that the contamination readings from smear samples of the riser equipment were greater than expected, the job was suspended. Crew members were then directed to areas of lower background radiation for personnel surveys. During personnel surveys, reportable contamination was found on the coat sleeve of the operator who had been involved in the pre-job survey and on the shirt sleeve of the RCT who had been involved in the pre-job survey. No other personnel were found to be contaminated. Because of this off normal event Characterization Engineering was given the following corrective action: Examine the process methodology used for core sampling operations to determine practicality and potential long-term advantages of reducing personnel contact with contaminated equipment. This Engineering Task Plan ensures that LMHC 1998a, Corrective Action No.7 is completely addressed by Characterization Engineering. The deliverable is an Engineering Study that evaluates decontamination of riser equipment components and considers additional engineered features to reduce potential exposure to workers operating the riser equipment. This engineering study shall also address any released design features that have failed to be implemented

Difficulties of Student Teachers in the Engineering Graphics and Design Course at a South African University: Snapshot on Sectional Drawing

Science.gov (United States)

Makgato, Moses; Khoza, Samuel D.

2016-01-01

Engineering Graphics and Design (EGD) is a university course that teaches a medium of communication in the form of drawings. This study was undertaken to investigate factors associated with the difficulties experienced by student teachers in the sectional drawing component of the EGD course. Purposive sampling was used to select 40 students…

Perceptions of genetic discrimination among people at risk for Huntington?s disease: a cross sectional survey

OpenAIRE

Bombard, Yvonne; Veenstra, Gerry; Friedman, Jan M; Creighton, Susan; Currie, Lauren; Paulsen, Jane S; Bottorff, Joan L; Hayden, Michael R

2009-01-01

Objective To assess the nature and prevalence of genetic discrimination experienced by people at risk for Huntington?s disease who had undergone genetic testing or remained untested. Design Cross sectional, self reported survey. Setting Seven genetics and movement disorders clinics servicing rural and urban communities in Canada. Participants 233 genetically tested and untested asymptomatic people at risk for Huntington?s disease (response rate 80%): 167 underwent testing (83 had the Huntingt...

Outline of scientific and research activities of the Faculty of Nuclear Science and Physical Engineering

International Nuclear Information System (INIS)

Loncar, G.

1982-01-01

A survey is presented of scientific and research activities carried out in the departments of the Faculty of Nuclear Science and Physical Engineering of the Czech Technical University in Prague. The first section lists the principal results achieved in the course of the 6th Five-Year Plan in Physical Electronics, Solid State Engineering, Materials Structure and Properties, Nuclear Physics, Theory and Technology of Nuclear Reactors, Dosimetry and Application of Ionizing Radiation and Nuclear Chemistry. The second part gives a summary of scientific and research work carried out in the Faculty of Nuclear Science and Physical Engineering in the 7th Five-Year Plan in all branches of science represented. The Faculty's achievements in international scientific cooperation are assessed. (author)

Integrated surgical academic training in the UK: a cross-sectional survey.

Science.gov (United States)

Blencowe, Natalie S; Glasbey, James C; McElnay, Philip J; Bhangu, Aneel; Gokani, Vimal J; Harries, Rhiannon L

2017-10-01

This study aimed to explore variations in the provision of integrated academic surgical training across the UK. This is an online cross-sectional survey (consisting of 44 items with a range of free-text, binomial and 5-point Likert scale responses) developed by the Association of Surgeons in Training. A self-reported survey instrument was distributed to academic surgical trainees across the UK (n=276). 143 (51.9%) responses were received (81% male, median age: 34 years), spanning all UK regions and surgical specialties. Of the 143 trainees, 29 were core trainees (20.3%), 99 were specialty trainees (69.2%) and 15 (10.5%) described themselves as research fellows. The structure of academic training varied considerably, with under a third of trainees receiving guaranteed protected time for research. Despite this, however, 53.1% of the respondents reported to be satisfied with how their academic training was organised. Covering clinical duties during academic time occurred commonly (72.7%). Although most trainees (n=88, 61.5%) met with their academic supervisor at least once a month, six (4.2%) never had an academic supervisory meeting. Most trainees (n=90, 62.9%) occupied a full-time rota slot and only 9.1% (n=13) described their role as 'supernumerary'. Although 58.7% (n=84) of the trainees were satisfied with their clinical competence, 37.8% (n=54) felt that clinical time focused more on service provision than the acquisition of technical skills. 58 (40.6%) had experienced some form of negative sentiment relating to their status as an academic trainee. Integrated academic training presents unique challenges and opportunities within surgery. This survey has identified variation in the quality of current programmes, meaning that the future provision of integrated surgical academic training should be carefully considered. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is

A Profile of the Woman Engineer, 1984.

Science.gov (United States)

Hetrick, Haydee; And Others

This biennial report is based on responses from 2,112 of the 4,453 non-student members of the Society of Women Engineers (SWE) who were surveyed during the winter of 1983-84. All responses to the survey questionnaire (included in an appendix) were considered in the data analysis. Any woman with an engineering degree, holding state engineering…

Biology: An Important Agricultural Engineering Mechanism

Science.gov (United States)

Henderson, S. M.

1974-01-01

Describes the field of bioengineering with particular emphasis on agricultural engineering, and presents the results of a survey of schools that combine biology and engineering in their curricula. (JR)

Sleep Bruxism-Tooth Grinding Prevalence, Characteristics and Familial Aggregation: A Large Cross-Sectional Survey and Polysomnographic Validation

Science.gov (United States)

Khoury, Samar; Carra, Maria Clotilde; Huynh, Nelly; Montplaisir, Jacques; Lavigne, Gilles J.

2016-01-01

Study Objectives: Sleep bruxism (SB) is characterized by tooth grinding and jaw clenching during sleep. Familial factors may contribute to the occurrence of SB. This study aims are: (1) revisit the prevalence and characteristics of SB in a large cross-sectional survey and assess familial aggregation of SB, (2) assess comorbidity such as insomnia and pain, (3) compare survey data in a subset of subjects diagnosed using polysomnography research criteria. Methods: A sample of 6,357 individuals from the general population in Quebec, Canada, undertook an online survey to assess the prevalence of SB, comorbidities, and familial aggregation. Data on familial aggregation were compared to 111 SB subjects diagnosed using polysomnography. Results: Regularly occurring SB was reported by 8.6% of the general population, decreases with age, without any gender difference. SB awareness is concomitant with complaints of difficulties maintaining sleep in 47.6% of the cases. A third of SB positive probands reported pain. A 2.5 risk ratio of having a first-degree family member with SB was found in SB positive probands. The risk of reporting SB in first-degree family ranges from 1.4 to 2.9 with increasing severity of reported SB. Polysomnographic data shows that 37% of SB subjects had at least one first-degree relative with reported SB with a relative risk ratio of 4.625. Conclusions: Our results support the heritability of SB-tooth grinding and that sleep quality and pain are concomitant in a significant number of SB subjects. Citation: Khoury S, Carra MC, Huynh N, Montplaisir J, Lavigne GJ. Sleep bruxism-tooth grinding prevalence, characteristics and familial aggregation: a large cross-sectional survey and polysomnographic validation. SLEEP 2016;39(11):2049–2056. PMID:27568807

Interests and attitudes of engineering students

Science.gov (United States)

Rutherford, Brian

2007-12-01

Engineering programs have been less successful than other professions in achieving gender equity. Analyses of gender differences in the attitudes and interests of engineering students may help illuminate ways to combat the underrepresentation of women in engineering. This study examined data collected from 863 engineering students who attended 15 American universities from fall 2005 through spring 2006 using an online survey. The survey was designed to understand the backgrounds, academic preparation, motivation, interests, and attitudes of engineering students. To determine whether males and females received different academic preparation prior to entering engineering, the survey examined participants' mathematics, science, and technical coursework taken in high school. The questions probed students' comfort and interest level in mathematics, science, and technology/engineering and investigated student interest in the three fundamental engineering activities by asking 49 design, build, and analyze questions on topics covering a variety of engineering disciplines. A combination of question formats was used including pre-categorized demographic information, 5-point Likert scales, and open-ended responses. Gender similarities and differences were identified and their implications were considered for the recruitment and retention of engineers. Female engineering students in this study were equally or better prepared than males to major in engineering based on the number and types of science and mathematics classes taken in high school. However, statistically significant gender differences were found in the attitudes and interests of engineering students. The difference in the comfort level, interest in learning, being able to demonstrate, or in performing stem skills depended on the question topic rather than gender. The areas with the highest comfort and interest level were often different for females and males. Several topics and curriculum areas of high interest to

Back pain online: a cross-sectional survey of the quality of web-based information on low back pain.

Science.gov (United States)

Butler, Laura; Foster, Nadine E

2003-02-15

A cross section of Web sites accessible to the general public was surveyed. To evaluate the quality of information on low back pain and its treatment that a "typical" patient user might access on the Internet. Individuals with back pain have a desire to learn about their condition, what to expect, and what they can do about it. Web sites play a potentially useful role in providing information to help people learn about their low back pain and select the most appropriate methods of management. A general search using popular search engines located 60 Web sites about back pain for review. A list of criteria for evaluating and scoring back pain Web sites was established using available literature and current clinical guidelines for the management of acute low back pain. The total quality score (maximum score, 38) was composed of two separate scores: one for general quality of the site (maximum score, 14) and one for site content specific to low back pain (maximum score, 24). Statistical tests, as appropriate, were used to investigate the relation between general indicators of Web site quality and total scores obtained. The quality of the Web sites surveyed was poor, most of them (n = 58, 97%) scoring less than half the maximum available score. The mean total score was 7.4 (range, 2-25). The mean score was 4.9 (range, 1-12) for general Web site quality and 2.4 (range, 1-13) for content specific to low back pain. Web sites providing references, sites created more recently, and sites not created for advertising purposes tended to be of better quality. This study highlighted the poor quality of information, particularly information about low back pain, available to "typical" patient users on the Internet. Health care professionals must have a role in evaluating existing information and in developing good-quality evidence-based Web sites. Patients with back pain should be discouraged from using the Internet as a source of information unless the Web sites they access have

GPs' mental wellbeing and psychological resources: a cross-sectional survey.

Science.gov (United States)

Murray, Marylou Anna; Cardwell, Chris; Donnelly, Michael

2017-08-01

The negative impact of work has been the traditional focus of GP surveys. We know little about GP positive mental health and psychological resources. To profile and contextualise GP positive mental health and personal psychological resources. Cross-sectional survey of GPs working in Northern Ireland (NI). A questionnaire comprising the Warwick Edinburgh Mental Wellbeing Scale (WEMWBS) and measures of resilience, optimism, self-efficacy, and hope, and sociodemographic information was posted to 400 GPs randomly selected from a publicly available GP register. The response rate was 55% (n = 221 out of 400). Mean value for GP wellbeing (WEMWBS) was 50.2 (standard deviation [SD] 8) compared to UK vets 48.8 (SD 9), UK teachers 47.2 (SD 9), and the population of NI 50.8 (SD 9). After adjustment for confounding, mean WEMWBS was 2.4 units (95% CI = 0.02 to 4.7) higher in female GPs than males ( P = 0.05), and 4.0 units (95% CI = 0.8 to 7.3) higher in GPs ≥55 years than GPs ≤44 years ( P = 0.02). Optimism was 1.1 units higher in female GPs than male GPs (95% CI = 0.1 to 2.0), and 1.56 units higher in GPs ≥55 years (95% CI = 0.2 to 2.9) than in those ≤44 years. Hope was 3 units higher in GPs ≥55 years (95% CI = 0.4 to 5.7) than in those aged 45-54 years. Correlation between WEMWBS and psychological resources was highest with hope ( r = 0.65, P mental health that are comparable to the local population and better than other occupational groups, such as vets and teachers. Male and younger GPs may have most to gain from wellbeing interventions. © British Journal of General Practice 2017.

Frequency and Perceptions of Herbal Medicine use Among Hmong Americans: a Cross Sectional Survey.

Science.gov (United States)

Lor, Kajua B; Moua, Sakura; Ip, Eric J

2016-04-01

To determine the frequency and perceptions of herbal medicine use among Hmong Americans. Cross-sectional telephone survey. Sacramento, California Hmong community. Out of 118 subjects reached, 77 (65.3 %) reported lifetime use of herbal medicines. A majority of respondents agreed that herbal medicines were able to treat the body as a whole. Respondents felt that a leaflet of information indicating uses/side effects would be important to include for herbal medicines. Herbal medicine use was commonly reported among Hmong Americans. Thus, health care providers should be encouraged to discuss these alternative medicines with their Hmong American patients.

Void detection beneath reinforced concrete sections: The practical application of ground-penetrating radar and ultrasonic techniques

Science.gov (United States)

Cassidy, Nigel J.; Eddies, Rod; Dods, Sam

2011-08-01

Ground-penetrating radar (GPR) and ultrasonic 'pulse echo' techniques are well-established methods for the imaging, investigation and analysis of steel reinforced concrete structures and are important civil engineering survey tools. GPR is, arguably, the more widely-used technique as it is suitable for a greater range of problem scenarios (i.e., from rebar mapping to moisture content determination). Ultrasonic techniques are traditionally associated with the engineering-based, non-destructive testing of concrete structures and their integrity analyses (e.g., flaw detection, shear/longitudinal velocity determination, etc). However, when used in an appropriate manner, both techniques can be considered complementary and provide a unique way of imaging the sub-surface that is suited to a range of geotechnical problems. In this paper, we present a comparative study between mid-to-high frequency GPR (450 MHz and 900 MHz) and array-based, shear wave, pulse-echo ultrasonic surveys using proprietary instruments and conventional GPR data processing and visualisation techniques. Our focus is the practical detection of sub-metre scale voids located under steel reinforced concrete sections in realistic survey conditions (e.g., a capped, relict mine shaft or vent). Representative two-dimensional (2D) sections are presented for both methods illustrating the similarities/differences in signal response and the temporal-spatial target resolutions achieved with each technique. The use of three-dimensional data volumes and time slices (or 'C-scans') for advanced interpretation is also demonstrated, which although common in GPR applications is under-utilised as a technique in general ultrasonic surveys. The results show that ultrasonic methods can perform as well as GPR for this specific investigation scenario and that they have the potential of overcoming some of the inherent limitations of GPR investigations (i.e., the need for careful antenna frequency selection and survey design in

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 28: The technical communication practices of aerospace engineering and science students: Results of the phase 4 cross-national surveys

Science.gov (United States)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate aerospace engineering and science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an aerospace engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication skills, practices, habits, and training of aerospace engineering and science students. The reported data were obtained from a survey of students enrolled in aerospace engineering and science programs at universities in India, Japan, Russia, and the United Kingdom. The surveys were undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

Burden of Surgical Conditions in Uganda: A Cross-sectional Nationwide Household Survey.

Science.gov (United States)

Tran, Tu M; Fuller, Anthony T; Butler, Elissa K; Makumbi, Fredrick; Luboga, Samuel; Muhumuza, Christine; Ssennono, Vincent F; Chipman, Jeffrey G; Galukande, Moses; Haglund, Michael M

2017-08-01

To quantify the burden of surgical conditions in Uganda. Data on the burden of disease have long served as a cornerstone to health policymaking, planning, and resource allocation. Population-based data are the gold standard, but no data on surgical burden at a national scale exist; therefore, we adapted the Surgeons OverSeas Assessment of Surgical Need survey and conducted a nation-wide, cross-sectional survey of Uganda to quantify the burden of surgically treatable conditions. The 2-stage cluster sample included 105 enumeration areas, representing 74 districts and Kampala Capital City Authority. Enumeration occurred from August 20 to September 12, 2014. In each enumeration area, 24 households were randomly selected; the head of the household provided details regarding any household deaths within the previous 12 months. Two household members were randomly selected for a head-to-toe verbal interview to determine existing untreated and treated surgical conditions. In 2315 households, we surveyed 4248 individuals: 461 (10.6%) reported 1 or more conditions requiring at least surgical consultation [95% confidence interval (CI) 8.9%-12.4%]. The most frequent barrier to surgical care was the lack of financial resources for the direct cost of care. Of the 153 household deaths recalled, 53 deaths (34.2%; 95% CI 22.1%-46.3%) were associated with surgically treatable signs/symptoms. Shortage of time was the most frequently cited reason (25.8%) among the 11.6% household deaths that should have, but did not, receive surgical care (95% CI 6.4%-16.8%). Unmet surgical need is prevalent in Uganda. There is an urgent need to expand the surgical care delivery system starting with the district-level hospitals. Routine surgical data collection at both the health facility and household level should be implemented.

A cross-sectional survey to assess the effect of socioeconomic status on the oral hygiene habits

OpenAIRE

Sukhvinder Singh Oberoi; Gaurav Sharma; Avneet Oberoi

2016-01-01

Background: It is widely accepted that there are socioeconomic inequalities in oral health. A socioeconomic gradient is found in a range of clinical and self-reported oral health outcomes. Aim: The present study was conducted to assess the differences in oral hygiene practices among patients from different socioeconomic status (SES) visiting the Outpatient Department of the Sudha Rustagi College of Dental Sciences. Materials and Methods: A cross-sectional survey was conducted from June to Oct...

Several aspects of the effect of nuclear power engineering and thermal power engineering on the environment

Energy Technology Data Exchange (ETDEWEB)

Malenchenko, A F

1979-01-01

A survey is made of the comparative effect of nuclear power engineering and thermal power engineering on environment and man. The most significant approaches to solution of radio-ecological problems of APS are found.

Employment after Spinal Cord Injury in Norway: A Cross-Sectional Survey

Directory of Open Access Journals (Sweden)

Erling F. Solheim

2018-04-01

Full Text Available Two research questions are addressed: 1 What predicts employment among persons with spinal cord injury (SCI in Norway? 2 How do the employed compare with the non-employed in their job motivation, labour discrimination, quality of life, everyday coping, health and pain suffering? We use a cross-sectional survey from 2012. With a 51% response rate, 320 Norwegians aged 21–66 years with SCI participated. After injury, 69.5% were employed, and 44.5% remained employed at the time of the interview. There was no gender difference in employment. Among men and women, age at onset of SCI, ability to continue working in the same organisation and education was associated with employment. For men paraplegia and vocational rehabilitation were also significant. Occupational class was non-significant among both men and women. Job motivation and work ability could have affected past employment, and both the employed and non-employed supported the statement that employers discriminate against wheelchair users.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 26: The technical communication practices of aerospace engineering students: Results of the phase 3 AIAA National Student Survey

Science.gov (United States)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of aerospace engineering students. The reported data were obtained from a survey of student members of the American Institute of Aeronautics and Astronautics (AIAA). The survey was undertaken as a phase 3 activity of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance; use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

Selective Guide to Literature on Engineering Geology. Engineering Literature Guides, Number 7.

Science.gov (United States)

Mullen, Cecilia P., Comp.

This guide has been prepared for use by the undergraduate or graduate student in engineering geology. Because of the broad scope of the field, the major disciplines of soil mechanics, rock mechanics, and foundations are primarily emphasized. This document is a survey of information sources in engineering geology and is intended to identify those…

Career Issues and Laboratory Climates: Different Challenges and Opportunities for Women Engineers and Scientists (survey of Fiscal Year 1997 Powre Awardees)

Science.gov (United States)

Rosser, Sue V.; Zieseniss, Mireille

A survey of fiscal year 1997 POWRE (Professional Opportunities for Women in Research and Education) awardees from the National Science Foundation revealed that women engineers and scientists face similar issues, challenges, and opportunities and think that the laboratory climate has similar impacts on their careers. Separating responses of women scientists from those of women engineers revealed that 70% of both groups listed balancing work with family responsibilities as the most difficult issue. Discrepancies in percentages of women, coupled with differences among disciplinary and subdisciplinary cultures within science, engineering, mathematics, and technology fields, complicate work climates and their impact on women's careers. More frequently than women scientists, women engineers listed issues such as (a) low numbers of women leading to isolation, (b) lack of camaraderie and mentoring, (c) gaining credibility/respect from peers and administrators, (d) time management, (e) prioritizing responsibilities due to disproportionate demands, and (f) learning the rules of the game to survive in a male-dominated environment. Women engineers also listed two positive issues more frequently than women scientists: active recruitment/more opportunities for women and impact of successful women in the profession. The small number of women engineers may explain these results and suggests that it may be inappropriate to group them with other women scientists for analysis, programs, and policies.

Tank waste remediation system process engineering instruction manual

International Nuclear Information System (INIS)

ADAMS, M.R.

1998-01-01

The purpose of the Tank Waste Remediation System (TWRS) Process Engineering Instruction Manual is to provide guidance and direction to TWRS Process Engineering staff regarding conduct of business. The objective is to establish a disciplined and consistent approach to business such that the work processes within TWRS Process Engineering are safe, high quality, disciplined, efficient, and consistent with Lockheed Martin Hanford Corporation Policies and Procedures. The sections within this manual are of two types: for compliance and for guidance. For compliance sections are intended to be followed per-the-letter until such time as they are formally changed per Section 2.0 of this manual. For guidance sections are intended to be used by the staff for guidance in the conduct of work where technical judgment and discernment are required. The guidance sections shall also be changed per Section 2.0 of this manual. The required header for each manual section is illustrated in Section 2.0, Manual Change Control procedure. It is intended that this manual be used as a training and indoctrination resource for employees of the TWRS Process Engineering organization. The manual shall be required reading for all TWRS Process Engineering staff, matrixed, and subcontracted employees

Survey of engineering computational methods and experimental programs for estimating supersonic missile aerodynamic characteristics

Science.gov (United States)

Sawyer, W. C.; Allen, J. M.; Hernandez, G.; Dillenius, M. F. E.; Hemsch, M. J.

1982-01-01

This paper presents a survey of engineering computational methods and experimental programs used for estimating the aerodynamic characteristics of missile configurations. Emphasis is placed on those methods which are suitable for preliminary design of conventional and advanced concepts. An analysis of the technical approaches of the various methods is made in order to assess their suitability to estimate longitudinal and/or lateral-directional characteristics for different classes of missile configurations. Some comparisons between the predicted characteristics and experimental data are presented. These comparisons are made for a large variation in flow conditions and model attitude parameters. The paper also presents known experimental research programs developed for the specific purpose of validating analytical methods and extending the capability of data-base programs.

A multispectral scanner survey of the Idaho National Engineering Laboratory and the Hanford Reservation

International Nuclear Information System (INIS)

Brewster, S.B. Jr.; Howard, M.E.; Shines, J.E.

1994-09-01

An airborne multispectral scanner survey of selected sites on the Idaho National Engineering Laboratory and the Hanford Reservation was performed in mid-November 1993. Aerial multispectral scanner and photography data were acquired coincidentally with the Big O experiment at both locations. To illustrate two potential applications, the multispectral scanner data were digitally enhanced to facilitate the detection of soil disturbance and evidence of surface water transport. The main conclusion of this study was that multispectral data acquired under these conditions can be useful for soil disturbance detection. The imagery did not prove as useful, however, for direct indications of surface water transport. It was possible to infer some water transport patterns from dry water beds, but only if surface indications were present

Schizophrenia through the carers' eyes: results of a European cross-sectional survey.

Science.gov (United States)

Svettini, A; Johnson, B; Magro, C; Saunders, J; Jones, K; Silk, S; Hargarter, L; Schreiner, A

2015-09-01

adherence to medication. A questionnaire-based cross-sectional survey of 138 carers across 16 European countries. Interpretation of results was based on a descriptive comparison of responses. Carers recognized the importance of medication to help patients get better (76%) and improve their quality of life (76%) and relationships (74%). Sixty-seven per cent believed medication damages general health. Sixty-five per cent reported that treatment adherence was a burden for patients. Thirty-eight per cent indicated that it was a daily struggle to get patients to take their medication. Fifty per cent perceived that medication administered every few weeks rather than daily was quite/very important. Ninety-three per cent agreed on the importance of family support to boost adherence, with education and information deemed important for families and patients. Carers rely less on the patient themselves when assessing adherence than psychiatrists. The burden faced by carers and patients in taking medication provides an opportunity for healthcare professionals to provide support in a multidisciplinary 'team' involving psychiatrists, nurses and carers. © 2015 The Authors. Journal of Psychiatric and Mental Health Nursing published by John Wiley & Sons Ltd.

A cross-sectional internet-based patient survey of the management strategies for gout.

Science.gov (United States)

Singh, Jasvinder A; Shah, Nipam; Edwards, N Lawrence

2016-03-01

Almost half of the patients with gout are not prescribed urate-lowering therapy (ULT) by their health care provider and >50 % use complementary and alternative therapies. Diet modification is popular among gout patients due to known associations of certain foods with gout flares. The interplay of the use of dietary supplements, diet modification, and ULT adherence in gout patients is not known. Despite the recent interest in diet and supplements, there are limited data on their use. Our objective was to assess ULT use and adherence and patient preference for non-pharmacological interventions by patients with gout, using a cross-sectional survey. People who self-reported physician-diagnosed gout during their visit to a gout website ( http://gouteducation.org ) were invited to participate in a brief anonymous cross-sectional Internet survey between 08/11/2014 to 04/14/2015 about the management of their gout. The survey queried ULT prescription, ULT adherence, the use of non-pharmacological interventions (cherry extract, diet modification) and the likelihood of making a lifelong diet modification for gout management. A total of 499 respondents with a mean age 56.3 years were included; 74% were males and 74% were White. Of these, 57% (285/499) participants were prescribed a ULT for gout, of whom 88% (251/285) were currently taking ULT. Of those using ULT, 78% (97/251) reported ULT adherence >80%. Gender, race, and age were not significantly associated with the likelihood of receiving a ULT prescription or ULT adherence >80%. Fifty-six percent of patients with gout preferred ULT as a lifelong treatment for gout, 24% preferred cherry extract and 16% preferred diet modification (4% preferred none). Men had significantly lower odds of preferring ULT as the lifelong treatment choice for gout vs. other choices (p = 0.03). We found that 38.3% participants were highly motivated to make a lifelong dietary modification to improve their gout (score of 9-10 on a 0

The Maritime Engineering Education

DEFF Research Database (Denmark)

Andersen, Ingrid Marie Vincent; Nielsen, Ulrik Dam; Lützen, Marie

2012-01-01

This article describes the outcome of a survey initiated by the Danish Maritime Fund (DMF). The survey resulted in a report that describes the engineering competencies requested by the Danish maritime industry. This is of interest since the desired competencies have changed in the past one to two...... decades, where Denmark no longer has a considerable ship-building industry. Furthermore, the DMF initiated report concludes that the demand for maritime engineers in the industry is larger than the output. The report sets forth a series of recommendations to the industry as well as the universities...... to enable meeting the demand for maritime engineers in Denmark. The recommendations are outlined together with the work commenced at the Technical University of Denmark (DTU) and the University of Southern Denmark (SDU) to follow up on the recommendations in the report....

Nationwide cross-sectional survey of schistosomiasis and soil-transmitted helminthiasis in Sudan: study protocol.

Science.gov (United States)

Cha, Seungman; Hong, Sung-Tae; Lee, Young-Ha; Lee, Keon Hoon; Cho, Dae Seong; Lee, Jinmoo; Chai, Jong-Yil; Elhag, Mousab Siddig; Khaled, Soheir Gabralla Ahmad; Elnimeiri, Mustafa Khidir Mustafa; Siddig, Nahid Abdelgadeir Ali; Abdelrazig, Hana; Awadelkareem, Sarah; Elshafie, Azza Tag Eldin; Ismail, Hassan Ahmed Hassan Ahmed; Amin, Mutamad

2017-09-12

Schistosomiasis and soil-transmitted helminthiasis (STHs) are target neglected tropical diseases (NTDs) of preventive chemotherapy, but the control and elimination of these diseases have been impeded due to resource constraints. Few reports have described study protocol to draw on when conducting a nationwide survey. We present a detailed methodological description of the integrated mapping of schistosomiasis and STHs on the basis of our experiences, hoping that this protocol can be applied to future surveys in similar settings. In addition to determining the ecological zones requiring mass drug administration interventions, we aim to provide precise estimates of the prevalence of these diseases. A school-based cross-sectional design will be applied for the nationwide survey across Sudan. The survey is designed to cover all districts in every state. We have divided each district into 3 different ecological zones depending on proximity to bodies of water. We will employ a probability-proportional-to-size sampling method for schools and systematic sampling for student selection to provide adequate data regarding the prevalence for schistosomiasis and STHs in Sudan at the state level. A total of 108,660 students will be selected from 1811 schools across Sudan. After the survey is completed, 391 ecological zones will be mapped out. To carry out the survey, 655 staff members were recruited. The feces and urine samples are microscopically examined by the Kato-Katz method and the sediment smears for helminth eggs respectively. For quality control, a minimum of 10% of the slides will be rechecked by the federal supervisors in each state and also 5% of the smears are validated again within one day by independent supervisors. This nationwide mapping is expected to generate important epidemiological information and indicators about schistosomiasis and STHs that will be useful for monitoring and evaluating the control program. The mapping data will also be used for overviewing

Full hoop casing for midframe of industrial gas turbine engine

Science.gov (United States)

Myers, Gerald A.; Charron, Richard C.

2015-12-01

A can annular industrial gas turbine engine, including: a single-piece rotor shaft spanning a compressor section (82), a combustion section (84), a turbine section (86); and a combustion section casing (10) having a section (28) configured as a full hoop. When the combustion section casing is detached from the engine and moved to a maintenance position to allow access to an interior of the engine, a positioning jig (98) is used to support the compressor section casing (83) and turbine section casing (87).

Tissue engineering

CERN Document Server

Fisher, John P; Bronzino, Joseph D

2007-01-01

Increasingly viewed as the future of medicine, the field of tissue engineering is still in its infancy. As evidenced in both the scientific and popular press, there exists considerable excitement surrounding the strategy of regenerative medicine. To achieve its highest potential, a series of technological advances must be made. Putting the numerous breakthroughs made in this field into a broad context, Tissue Engineering disseminates current thinking on the development of engineered tissues. Divided into three sections, the book covers the fundamentals of tissue engineering, enabling technologies, and tissue engineering applications. It examines the properties of stem cells, primary cells, growth factors, and extracellular matrix as well as their impact on the development of tissue engineered devices. Contributions focus on those strategies typically incorporated into tissue engineered devices or utilized in their development, including scaffolds, nanocomposites, bioreactors, drug delivery systems, and gene t...

Polymer reaction engineering, an integrated approach

NARCIS (Netherlands)

Meyer, T.; Keurentjes, J.T.F.; Meyer, T.; Keurentjes, J.T.F.

2005-01-01

Summary This chapter contains sections titled: Polymer Materials A Short History of Polymer Reaction Engineering The Position of Polymer Reaction Engineering Toward Integrated Polymer Reaction Engineering The Disciplines in Polymer Reaction Engineering The Future: Product-inspired Polymer Reaction

48 CFR 227.7107 - Contracts for architect-engineer services.

Science.gov (United States)

2010-10-01

...-engineer services. 227.7107 Section 227.7107 Federal Acquisition Regulations System DEFENSE ACQUISITION... Rights in Technical Data 227.7107 Contracts for architect-engineer services. This section sets forth... of construction and architect-engineer services. ...

Riser equipment decontamination engineering task plan; TOPICAL

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

On October 15, 1998, two Characterization Project Operations (CPO) employees were found to have contaminated clothing. An operator had 300,000-dpm/100cm2 beta/gamma, no alpha, contamination on his coat sleeve and a Radiation Control Technician (RCT) had 10,000 dpm/100cm2 beta/gamma, no alpha, on his shirt sleeve. The CPO swing shift crew was working in TX tank farm, performing sampling activities at 241-TX-113. TX tank farm is a ''clean farm'' and does not require anti-contamination clothing for entry. The CPO personnel were dressed in normal work clothes. An operator and an RCT were performing a pre-job survey that involved removing bagging around the riser equipment. When the RCT saw that the contamination readings from smear samples of the riser equipment were greater than expected, the job was suspended. Crew members were then directed to areas of lower background radiation for personnel surveys. During personnel surveys, reportable contamination was found on the coat sleeve of the operator who had been involved in the pre-job survey and on the shirt sleeve of the RCT who had been involved in the pre-job survey. No other personnel were found to be contaminated. Because of this off normal event Characterization Engineering was given the following corrective action: Examine the process methodology used for core sampling operations to determine practicality and potential long-term advantages of reducing personnel contact with contaminated equipment. This Engineering Task Plan ensures that LMHC 1998a, Corrective Action No.7 is completely addressed by Characterization Engineering. The deliverable is an Engineering Study that evaluates decontamination of riser equipment components and considers additional engineered features to reduce potential exposure to workers operating the riser equipment. This engineering study shall also address any released design features that have failed to be implemented

40 CFR 89.410 - Engine test cycle.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine test cycle. 89.410 Section 89... Procedures § 89.410 Engine test cycle. (a) Emissions shall be measured using one of the test cycles specified...) through (a)(4) of this section. These cycles shall be used to test engines on a dynamometer. (1) The 8...

Environmental engineering of navigation infrastructure: a survey of existing practices, challenges, and potential opportunities.

Science.gov (United States)

Fredette, Thomas J; Foran, Christy M; Brasfield, Sandra M; Suedel, Burton C

2012-01-01

Navigation infrastructure such as channels, jetties, river training structures, and lock-and-dam facilities are primary components of a safe and efficient water transportation system. Planning for such infrastructure has until recently involved efforts to minimize impacts on the environment through a standardized environmental assessment process. More recently, consistent with environmental sustainability concepts, planners have begun to consider how such projects can also be constructed with environmental enhancements. This study examined the existing institutional conditions within the US Army Corps of Engineers and cooperating federal agencies relative to incorporating environmental enhancements into navigation infrastructure projects. The study sought to (1) investigate institutional attitudes towards the environmental enhancement of navigation infrastructure (EENI) concept, (2) identify potential impediments to implementation and solutions to such impediments, (3) identify existing navigation projects designed with the express intent of enhancing environmental benefit in addition to the primary project purpose, (4) identify innovative ideas for increasing environmental benefits for navigation projects, (5) identify needs for additional technical information or research, and (6) identify laws, regulations, and policies that both support and hinder such design features. The principal investigation tool was an Internet-based survey with 53 questions. The survey captured a wide range of perspectives on the EENI concept including ideas, concerns, research needs, and relevant laws and policies. Study recommendations included further promotion of the concept of EENI to planners and designers, documentation of existing projects, initiation of pilot studies on some of the innovative ideas provided through the survey, and development of national goals and interagency agreements to facilitate implementation. Copyright © 2011 SETAC.

Developing excellence awareness at Davis-Besse through engineering quality management

International Nuclear Information System (INIS)

Gaudette, M.R.; Lash, J.H.; Haiman, D.L.

1989-01-01

At Davis-Besse nuclear power station engineering quality management includes a variety of chartered functions whose ultimate objective is to improve product and service quality and process efficiency. These functions were assigned in late 1988 to engineering assurance personnel, a section of the engineering department which reports directly to the engineering director but is independent of design activities. This independence ensures objectivity and allows the improvement process to span functional areas so that changes made in one engineering section do not negatively impact the activities of another section. The engineering quality management functions performed by the engineering assurance group are summarized. Engineering quality management at Davis-Besse has increased the degree of excellence evident in engineering products and services

A survey of characteristic engine features for technology-sustained pervasive games

CERN Document Server

Nevelsteen, Kim JL

2015-01-01

This book scrutinizes pervasive games from a technological perspective, focusing on the sub-domain of games that satisfy the criteria that they make use of virtual game elements. In the computer game industry, the use of a game engine to build games is common, but current game engines do not support pervasive games. Since the computer game industry is already rich with game engines, this book investigates: (i) if a game engine can be repurposed to stage pervasive games; (ii) if features describing a would-be pervasive game engine can be identified; (iii) using those features, if an architectu

Professional satisfaction of family physicians in Pakistan--results of a cross-sectional postal survey.

Science.gov (United States)

Ashraf, Hiba; Shah, Nasir; Anwer, Fahad; Akhtar, Hina; Abro, Mairaj Anwar; Khan, Asma

2014-04-01

To assess the level of professional satisfaction amongst family physicians of Pakistan and to identify the factors associated with professional dissatisfaction. The study was part of a larger national survey for "Status of PostgraduateTraining and Continuing Medical Education of Family Physicians in Pakistan" which was a cross-sectional, postal survey of family physicians conducted over 10 months between November 2009 and September 2010. The main outcome variables were professional satisfaction, as well as reasons for professional satisfaction and dissatisfaction. SPSS 17 was used for data analysis. Multivariable logistic regression was used to determine factors associated with professional dissatisfaction. Of the total 1200 survey forms distributed, 288 (24%) were received back. The mean age of the participants was 37 +/- 9 years with a range between 26 and 72 years. Of the total, 226 (78.5%) were males. Overall, 213 (74%) family physicians were satisfied with their profession. The factors significantly associated with professional dissatisfaction included the participants opinion that they were not respected by the public (OR: 11.6, C.I: 1.9-71.5); as well as regretting being a doctor (OR:62.9, C.I: 8.4-469.8). Most of the family physicians had professional satisfaction, but a minority had regrets about being a doctor and were dissatisfied over how their profession affected their family life. Further research may be needed to study work-life balance amongst family physicians of Pakistan.

Interviews held with engineers who have graduated from the Faculty of Engineering

OpenAIRE

Antonio Mejía; Marcelo Riveros; Alberto Mayor

2012-01-01

This section presents interviews held with two eminent engineers who have graduated from the Faculty of Engineering. Marcelo Riveros and Alberto Mayor interviewed the distinguished engineer Guillermina Uribe who was the first woman to graduate from the Universidad Nacional de Colombia’s Faculty of Engineering whilst Antonio Mejía and Alberto Mayor interviewed José Fernando Isaza Delgado, mathematician, businessman, columnist, teacher and rector of Universidad Jorge Tadeo Lozano, who graduated...

Diesel Engine Mechanics.

Science.gov (United States)

Foutes, William A.

Written in student performance terms, this curriculum guide on diesel engine repair is divided into the following eight sections: an orientation to the occupational field and instructional program; instruction in operating principles; instruction in engine components; instruction in auxiliary systems; instruction in fuel systems; instruction in…

Standard technical specifications: Combustion engineering plants. Volume 3, Revision 1: Bases (Sections 3.4--3.9)

International Nuclear Information System (INIS)

1995-04-01

This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for Combustion Engineering Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS Volume 3 contains the Bases for Sections 3.4--3.9 of the improved STS

Impacts of Innovativeness and Attitude on Entrepreneurial Intention: Among Engineering and Non-Engineering Students

Science.gov (United States)

Law, Kris M. Y.; Breznik, Kristijan

2017-01-01

This study attempted to explore the impacts of attitudinal antecedents on students' entrepreneurial intention. Comparisons between students of engineering and non-engineering backgrounds and gender groups were made. Total of 998 students from universities in Hong Kong were surveyed, leading to a number of highlights in the study. First, it is…

47 CFR 73.333 - Engineering charts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

Survey of formal and informal citation in Google search engine

Directory of Open Access Journals (Sweden)

Afsaneh Teymourikhani

2016-03-01

Full Text Available Aim: Informal citations is bibliographic information (title or Internet address, citing sources of information resources for informal scholarly communication and always neglected in traditional citation databases. This study is done, in order to answer the question of whether informal citations in the web environment are traceable. The present research aims to determine what proportion of web citations of Google search engine is related to formal and informal citation. Research method: Webometrics is the method used. The study is done on 1344 research articles of 98 open access journal, and the method that is used to extract the web citation from Google search engine is “Web / URL citation extraction". Findings: The findings showed that ten percent of the web citations of Google search engine are formal and informal citations. The highest formal citation in the Google search engine with 19/27% is in the field of library and information science and the lowest official citation by 1/54% is devoted to the field of civil engineering. The highest percentage of informal citations with 3/57% is devoted to sociology and the lowest percentage of informal citations by 0/39% is devoted to the field of civil engineering. Journal Citation is highest with 94/12% in the surgical field and lowest with 5/26 percent in the philosophy filed. Result: Due to formal and informal citations in the Google search engine which is about 10 percent and the reduction of this amount compared to previous research, it seems that track citations by this engine should be treated with more caution. We see that the amount of formal citation is variable in different disciplines. Cited journals in the field of surgery, is highest and in the filed of philosophy is lowest, this indicates that in the filed of philosophy, that is a subset of the social sciences, journals in scientific communication do not play a significant role. On the other hand, book has a key role in this filed

Gauging Workplace Readiness: Assessing the Information Needs of Engineering Co-op Students

Science.gov (United States)

Jeffryes, Jon; Lafferty, Meghan

2012-01-01

Librarians at the Science and Engineering Library at the University of Minnesota surveyed engineering students participating in a work placement as part of the cooperative education program. The survey asked about students' on-the-job information usage, comfort level accessing different types of engineering literature, and experience learning to…

14 CFR 33.21 - Engine cooling.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine cooling. 33.21 Section 33.21 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; General § 33.21 Engine cooling. Engine design and...

MATERNAL AND INFANT HEALTH SECTION OF THE DEMOGRAPHIC AND HEALTH SURVEY REPORT OF GHANA, 2008: A COMMENTARY

Directory of Open Access Journals (Sweden)

Samuel Adu-gyamfi

2016-02-01

Full Text Available This article is basically a commentary on some sections on infant and maternalhealthcare of the 2008 demographic and health survey of Ghana. The attention of bothpolicy makers and academics are drawn to the need to ensure the expansion of thematernal and infant healthcare in Ghana. In same commentary, attention of readershave been drawn to the proclivity of the free maternal health policy to positively shapematernal and infant care in Ghana.

Health-state utilities in a prisoner population: a cross-sectional survey

Directory of Open Access Journals (Sweden)

Levy Michael H

2009-08-01

Full Text Available Abstract Background Health-state utilities for prisoners have not been described. Methods We used data from a 1996 cross-sectional survey of Australian prisoners (n = 734. Respondent-level SF-36 data was transformed into utility scores by both the SF-6D and Nichol's method. Socio-demographic and clinical predictors of SF-6D utility were assessed in univariate analyses and a multivariate general linear model. Results The overall mean SF-6D utility was 0.725 (SD 0.119. When subdivided by various medical conditions, prisoner SF-6D utilities ranged from 0.620 for angina to 0.764 for those with none/mild depressive symptoms. Utilities derived by the Nichol's method were higher than SF-6D scores, often by more than 0.1. In multivariate analysis, significant independent predictors of worse utility included female gender, increasing age, increasing number of comorbidities and more severe depressive symptoms. Conclusion The utilities presented may prove useful for future economic and decision models evaluating prison-based health programs.

14 CFR 121.279 - Control of engine rotation.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Control of engine rotation. 121.279 Section... of engine rotation. (a) Except as provided in paragraph (b) of this section, each airplane must have a means of individually stopping and restarting the rotation of any engine in flight. (b) In the...

40 CFR 1042.330 - Selling engines from an engine family with a suspended certificate of conformity.

Science.gov (United States)

2010-07-01

... with a suspended certificate of conformity. 1042.330 Section 1042.330 Protection of Environment... engines from an engine family with a suspended certificate of conformity. You may sell engines that you produce after we suspend the engine family's certificate of conformity under § 1042.315 only if one of the...

40 CFR 205.153 - Engine displacement.

Science.gov (United States)

2010-07-01

..., in accordance with American Society for Testing Materials (ASTM) E 29-67. (b) For rotary engines... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Engine displacement. 205.153 Section... TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycles § 205.153 Engine displacement. (a) Engine...

14 CFR 125.177 - Control of engine rotation.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Control of engine rotation. 125.177 Section... Requirements § 125.177 Control of engine rotation. (a) Except as provided in paragraph (b) of this section, each airplane must have a means of individually stopping and restarting the rotation of any engine in...

Model-Based Systems Engineering in Concurrent Engineering Centers

Science.gov (United States)

Iwata, Curtis; Infeld, Samantha; Bracken, Jennifer Medlin; McGuire, Melissa; McQuirk, Christina; Kisdi, Aron; Murphy, Jonathan; Cole, Bjorn; Zarifian, Pezhman

2015-01-01

Concurrent Engineering Centers (CECs) are specialized facilities with a goal of generating and maturing engineering designs by enabling rapid design iterations. This is accomplished by co-locating a team of experts (either physically or virtually) in a room with a narrow design goal and a limited timeline of a week or less. The systems engineer uses a model of the system to capture the relevant interfaces and manage the overall architecture. A single model that integrates other design information and modeling allows the entire team to visualize the concurrent activity and identify conflicts more efficiently, potentially resulting in a systems model that will continue to be used throughout the project lifecycle. Performing systems engineering using such a system model is the definition of model-based systems engineering (MBSE); therefore, CECs evolving their approach to incorporate advances in MBSE are more successful in reducing time and cost needed to meet study goals. This paper surveys space mission CECs that are in the middle of this evolution, and the authors share their experiences in order to promote discussion within the community.

Software Engineering Frameworks: Textbooks vs. Student Perceptions

Science.gov (United States)

McMaster, Kirby; Hadfield, Steven; Wolthuis, Stuart; Sambasivam, Samuel

2012-01-01

This research examines the frameworks used by Computer Science and Information Systems students at the conclusion of their first semester of study of Software Engineering. A questionnaire listing 64 Software Engineering concepts was given to students upon completion of their first Software Engineering course. This survey was given to samples of…

Engineering qualifications for competence

International Nuclear Information System (INIS)

Levy, J.C.

1990-01-01

The Engineering Council has a responsibility across all fields of engineering to set standards for those who are registered as Chartered Engineers, Incorporated Engineers or Engineering Technicians. These standards amount to a basic specification of professional competence to which must be added the features needed in each different branch of engineering, such as nuclear, and each particular occupation, such as quality assurance. This article describes The Engineering Council's general standards and includes a guide to the roles and responsibilities which should lie within the domain of those who are registered with the Council. The concluding section describes the title of European Engineer and its relationship to the European Community directive governing the movement of professionals across community frontiers. (author)

40 CFR 1065.130 - Engine exhaust.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Engine exhaust. 1065.130 Section 1065... ENGINE-TESTING PROCEDURES Equipment Specifications § 1065.130 Engine exhaust. (a) General. Use the exhaust system installed with the engine or one that represents a typical in-use configuration. This...

Nutritional situation among Syrian refugees hosted in Iraq, Jordan, and Lebanon: cross sectional surveys.

Science.gov (United States)

Hossain, S M Moazzem; Leidman, Eva; Kingori, James; Al Harun, Abdullah; Bilukha, Oleg O

2016-01-01

Ongoing armed conflict in Syria has caused large scale displacement. Approximately half of the population of Syria have been displaced including the millions living as refugees in neighboring countries. We sought to assess the health and nutrition of Syrian refugees affected by the conflict. Representative cross-sectional surveys of Syrian refugees were conducted between October 2 and November 30, 2013 in Lebanon, April 12 and May 1, 2014 in Jordan, and May 20 and 31, 2013 in Iraq. Surveys in Lebanon were organized in four geographical regions (North, South, Beirut/Mount Lebanon and Bekaa). In Jordan, independent surveys assessed refugees residing in Za'atri refugee camp and refugees residing among host community nationwide. In Iraq, refugees residing in Domiz refugee camp in the Kurdistan region were assessed. Data collected on children aged 6 to 59 months included anthropometric indicators, morbidity and feeding practices. In Jordan and Lebanon, data collection also included hemoglobin concentration for children and non-pregnant women aged 15 to 49 years, anthropometric indicators for both pregnant and non-pregnant women, and household level indicators such as access to safe water and sanitation. The prevalence of global acute malnutrition among children 6 to 59 months of age was less than 5 % in all samples (range 0.3-4.4 %). Prevalence of acute malnutrition among women 15 to 49 years of age, defined as mid-upper arm circumference less than 23.0 cm, was also relatively low in all surveys (range 3.5-6.5 %). For both children and non-pregnant women, anemia prevalence was highest in Za'atri camp in Jordan (48.4 % and 44.8 %, respectively). Most anemia was mild or moderate; prevalence of severe anemia was less than or equal to 1.1 % in all samples of children and women. Despite the ongoing conflict, results from all surveys indicate that global acute malnutrition is relatively low in the assessed Syrian refugee populations. However, prevalence of anemia

Psychological consequences of aggression in pre-hospital emergency care: cross sectional survey.

Science.gov (United States)

Bernaldo-De-Quirós, Mónica; Piccini, Ana T; Gómez, M Mar; Cerdeira, Jose C

2015-01-01

Pre-hospital emergency care is a particularly vulnerable setting for workplace violence. However, there is no literature available to date on the psychological consequences of violence in pre-hospital emergency care. To evaluate the psychological consequences of exposure to workplace violence from patients and those accompanying them in pre-hospital emergency care. A retrospective cross-sectional study. 70 pre-hospital emergency care services located in Madrid region. A randomized sample of 441 health care workers (135 physicians, 127 nurses and 179 emergency care assistants). Data were collected from February to May 2012. The survey was divided into four sections: demographic/professional information, level of burnout determined by Maslach Burnout Inventory (MBI), mental health status using General Health Questionnaire (GHQ-28) and frequency and type of violent behaviour experienced by staff members. The health care professionals who had been exposed to physical and verbal violence presented a significantly higher percentage of anxiety, emotional exhaustion, depersonalization and burnout syndrome compared with those who had not been subjected to any aggression. Frequency of verbal violence (more than five times) was related to emotional exhaustion and depersonalization. Type of violence (i.e. physical aggression) is especially related to high anxiety levels and frequency of verbal aggression is associated with burnout (emotional exhaustion and depersonalization). Psychological counselling should be made available to professional staff who have been subjected to physical aggression or frequent verbal violence. Copyright © 2014 Elsevier Ltd. All rights reserved.

47 CFR 73.699 - TV engineering charts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

14 CFR 23.361 - Engine torque.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine torque. 23.361 Section 23.361... Engine torque. (a) Each engine mount and its supporting structure must be designed for the effects of— (1) A limit engine torque corresponding to takeoff power and propeller speed acting simultaneously with...

14 CFR 25.361 - Engine torque.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine torque. 25.361 Section 25.361... STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Supplementary Conditions § 25.361 Engine torque. (a) Each engine mount and its supporting structure must be designed for the effects of— (1) A limit engine torque...

Factors relating to adolescent suicidal behavior: a cross-sectional Malaysian school survey.

Science.gov (United States)

Chen, Paul C Y; Lee, Lai Kah; Wong, Kam Cheong; Kaur, Jagmohni

2005-10-01

This study was undertaken to examine factors relating to adolescent suicide behavior. This was a cross-sectional school survey of 4,500 adolescent students based on a structured questionnaire. Data were collected using the supervised self-administered questionnaire (modified version of the Youth Risk Behavior Surveillance in the Malaysian National Language, Bahasa Malaysia). Seven percent (312 of 4,454) of the adolescent students had seriously considered attempting suicide. Among the adolescents, 4.6% had attempted suicide at least once during the 12 months preceding the survey. Female adolescents were more likely to put their suicidal thoughts into suicidal action than were male adolescents. Malay and Indian people are more likely than the Chinese to respond, "Felt sad and hopeless." However, Malay adolescents had the lowest rate of attempted suicide. Based on multiple logistic regression, factors significantly related to urban adolescents' suicide behavior are "Felt sad or hopeless," "Number of days felt unsafe to go to school," "Riding with a driver who had been drinking alcohol," "Physical fight," and "Number of days absent from school." In comparison, factors relating to rural adolescents' suicide behavior are "Felt sad or hopeless," "Physical fight," "Physical fight resulting in injury," and "Drive a vehicle after drinking alcohol." Adolescent suicide behavior should be viewed as a serious problem. Measures can be taken to prevent suicide by looking at the factors significantly linked to suicidal behavior among adolescents. Steps can then be taken to identify adolescents who have serious suicidal ideation so that intervention can be taken to reduce the suicidal rate.

Cultural Resources Survey of Smithville Lake, Missouri. Volume 1: Archeology

Science.gov (United States)

1977-11-01

archaeology ; the engineering and building technology of the Maya ; the origin and spread of domesticated plants; and cultural classification...INTRODUCTION 1 2. ENVIRONMENTAL SETTING 1 3. PROBLEM 3 4. SURVEY: 4 Previous Survey Work. , 4 Archaeological Background 5 Survey Methods and Tracts... Archaeological Research Design, pp. 11-55. Ms. submitted to U.S. Army Corps of Engineers, Kansas City District. "Spatial and Temporal Variability

Use of Dynamic Visualizations for Engineering Technology, Industrial Technology, and Science Education Students: Implications on Ability to Correctly Create a Sectional View Sketch

Science.gov (United States)

Katsioloudis, Petros; Dickerson, Daniel; Jovanovic, Vukica; Jones, Mildred V.

2016-01-01

Spatial abilities, specifically visualization, play a significant role in the achievement in a wide array of professions including, but not limited to, engineering, technical, mathematical, and scientific professions. However, there is little correlation between the advantages of spatial ability as measured through the creation of a sectional-view…

14 CFR 25.903 - Engines.

Science.gov (United States)

2010-01-01

... chapter. (2) Each turbine engine must comply with one of the following: (i) Sections 33.76, 33.77 and 33... any engine individually in flight, except that, for turbine engine installations, the means for... might be exposed to fire must be at least fire-resistant. If hydraulic propeller feathering systems are...

Engineering and Sustainability: Attitudes and Actions

Directory of Open Access Journals (Sweden)

Marc A. Rosen

2013-01-01

Full Text Available The results of an extensive survey of engineers and engineering students suggest there is a strong focus on the implementation of sustainability concepts, actions and measures in engineering. The main sustainable technology priorities are using less energy and natural resources, reducing emissions and material wastes, and utilizing renewable, recyclable and recycled materials. Sustainable engineering within organizations is mainly driven by regulatory requirements, rising energy costs and client demand, but challenges to sustainable engineering like economics need to be addressed to increase the incorporation of sustainability in engineering. Nonetheless, about two-thirds of practicing engineers have worked on sustainable products and processes, and over half of engineering students are involved with sustainable design in their studies.

Cross-sectional prospective survey to study indication-based usage of antimicrobials in animals: Results of use in cattle

Directory of Open Access Journals (Sweden)

Pyörälä Satu

2008-04-01

Full Text Available Abstract Background Indication-based data on the use of antimicrobials in animals were collected using a prospective cross-sectional survey, similarly as for surveys carried out in human medicine, but adapting the questionnaire to include veterinary-specific issues. The participating veterinarians were randomly selected from a sample population of practising veterinarians. The sampling was stratified to take into account the proportions of different types of veterinary practice in the country. All patients consulting the veterinary practice during a 1-week period were included in the study and veterinarians returned a completed questionnaire for each patient receiving antimicrobial treatment. As cattle received most of the treatments, results from the survey are given using cattle as an example species. Results The survey was sent to 681 veterinarians, of whom 262 (39% responded. In total 2850 questionnaires were completed. The largest quantities of antimicrobials, measured in kilograms, were used for cattle, followed by pigs, dogs and horses. The species that were treated most were cattle (n = 1308, dogs (n = 989 and cats (n = 311. For cattle, the most common reason for treatment was acute mastitis (52%, followed by dry-cow therapy (21%, subclinical mastitis (6% and treatment for acute enteritis (4%. The remaining treatments covered 17% of cattle patients and 15 different indications. For acute mastitis, parenteral or intramammary treatment was used in 36% and 34% of the cases, respectively. The remaining 30% received both treatments simultaneously. Of the parenteral treatments (n = 459, benzyl penicillin was used in 83% of the treated animals (n = 379, while fluoroquinolones were used in 49 cases (11%. Of the 433 cows receiving intramammary treatment, ampicillin combined with cloxacillin was most commonly used (n = 157; 36%, followed by cephalexin+streptomycin (n = 113; 26%. Conclusion This cross-sectional prospective survey provided a useful

Cross-sectional prospective survey to study indication-based usage of antimicrobials in animals: results of use in cattle.

Science.gov (United States)

Thomson, Katariina; Rantala, Merja; Hautala, Maria; Pyörälä, Satu; Kaartinen, Liisa

2008-04-14

Indication-based data on the use of antimicrobials in animals were collected using a prospective cross-sectional survey, similarly as for surveys carried out in human medicine, but adapting the questionnaire to include veterinary-specific issues. The participating veterinarians were randomly selected from a sample population of practising veterinarians. The sampling was stratified to take into account the proportions of different types of veterinary practice in the country. All patients consulting the veterinary practice during a 1-week period were included in the study and veterinarians returned a completed questionnaire for each patient receiving antimicrobial treatment. As cattle received most of the treatments, results from the survey are given using cattle as an example species. The survey was sent to 681 veterinarians, of whom 262 (39%) responded. In total 2850 questionnaires were completed. The largest quantities of antimicrobials, measured in kilograms, were used for cattle, followed by pigs, dogs and horses. The species that were treated most were cattle (n = 1308), dogs (n = 989) and cats (n = 311). For cattle, the most common reason for treatment was acute mastitis (52%), followed by dry-cow therapy (21%), subclinical mastitis (6%) and treatment for acute enteritis (4%). The remaining treatments covered 17% of cattle patients and 15 different indications. For acute mastitis, parenteral or intramammary treatment was used in 36% and 34% of the cases, respectively. The remaining 30% received both treatments simultaneously. Of the parenteral treatments (n = 459), benzyl penicillin was used in 83% of the treated animals (n = 379), while fluoroquinolones were used in 49 cases (11%). Of the 433 cows receiving intramammary treatment, ampicillin combined with cloxacillin was most commonly used (n = 157; 36%), followed by cephalexin+streptomycin (n = 113; 26%). This cross-sectional prospective survey provided a useful method for the collection of information on

Pipeline or Personal Preference: Women in Engineering

Science.gov (United States)

Schreuders, P. D.; Mannon, S. E.; Rutherford, B.

2009-01-01

Although the number of women in the engineering field has increased since the 1960s, those increases have largely stagnated over the last few years. This paper re-examines the pipeline for bringing women into engineering and, based on survey data, examines the attitudes, motivations, and interests of 969 male and female engineering students.…

Turbofan gas turbine engine with variable fan outlet guide vanes

Science.gov (United States)

Wood, Peter John (Inventor); LaChapelle, Donald George (Inventor); Grant, Carl (Inventor); Zenon, Ruby Lasandra (Inventor); Mielke, Mark Joseph (Inventor)

2010-01-01

A turbofan gas turbine engine includes a forward fan section with a row of fan rotor blades, a core engine, and a fan bypass duct downstream of the forward fan section and radially outwardly of the core engine. The forward fan section has only a single stage of variable fan guide vanes which are variable fan outlet guide vanes downstream of the forward fan rotor blades. An exemplary embodiment of the engine includes an afterburner downstream of the fan bypass duct between the core engine and an exhaust nozzle. The variable fan outlet guide vanes are operable to pivot from a nominal OGV position at take-off to an open OGV position at a high flight Mach Number which may be in a range of between about 2.5-4+. Struts extend radially across a radially inwardly curved portion of a flowpath of the engine between the forward fan section and the core engine.

23 CFR 645.109 - Preliminary engineering.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Preliminary engineering. 645.109 Section 645.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS UTILITIES Utility Relocations, Adjustments, and Reimbursement § 645.109 Preliminary engineering. (a) As...

14 CFR 29.361 - Engine torque.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine torque. 29.361 Section 29.361... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements Flight Loads § 29.361 Engine torque. The limit engine torque may not be less than the following: (a) For turbine engines, the highest of— (1) The...

46 CFR 15.820 - Chief engineer.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Chief engineer. 15.820 Section 15.820 Shipping COAST... Computations § 15.820 Chief engineer. (a) There must be an individual holding an MMC or license endorsed as chief engineer or other credential authorizing service as chief engineer employed on board the following...

Use of radar survey data for engineering-geological studies

Energy Technology Data Exchange (ETDEWEB)

Valyakh, V M; Grafskii, B V

1979-01-01

A description is given of the basic methodical principles underlying the use of aerial survey radar data in regional studies. The basic characteristics of deciphering indicators on the surveys are identified.

Are women engineers in Lebanon prepared for the challenges of an engineering profession?

Science.gov (United States)

Baytiyeh, Hoda

2013-08-01

This study investigates the status of women engineers in the Middle East, considering women engineers in Lebanon as a case study. The author investigated the following questions: What are the influences behind females' decisions to choose engineering as their major course of study? What are the motives behind this decision? What are the perceptions of females regarding the essential skills for a successful engineering career? An online survey consisting of Likert-scale items was completed by 327 female engineers who graduated from universities in Lebanon and now work in various locations around the world. A genuine interest in the field appeared to be the main influence in the participants' decisions to choose engineering profession. The potential for professional growth was the leading motivator for choosing engineering. Although participants reported that they possessed adequate theoretical knowledge and technical skills before graduation, in the actual practice of engineering, they noted weaknesses in creativity and innovation.

46 CFR 11.505 - Engineer officer structure.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Engineer officer structure. 11.505 Section 11.505... OFFICER ENDORSEMENTS Professional Requirements for Engineer Officer § 11.505 Engineer officer structure. The following diagram illustrates the engineering endorsement structure including cross over points...

Patient safety in practical nurses' education: A cross-sectional survey of newly registered practical nurses in Canada.

Science.gov (United States)

VanDenKerkhof, Elizabeth; Sears, Nancy; Edge, Dana S; Tregunno, Deborah; Ginsburg, Liane

2017-04-01

Practical nurses have experienced an increasing scope of practice, including an expectation to care for complex patients and function on interdisciplinary teams. Little is known about the degree to which patient safety principles are addressed in practical nursing education. To examine self-reported patient safety competencies of practical nurses. A cross-sectional online survey (July 2014) and face-to-face interviews (June 2015). Ontario, Canada. Survey participants were practical nurses newly registered with the College of Nurses of Ontario between January 2012 and December 2013. Interview participants were faculty and students in a practical nursing program in Ontario. Survey respondents completed the Health Professional Education in Patient Safety Survey online. Self-reported competencies in various patient safety domains were compared between classroom and clinical settings. Faculty members were interviewed about educational preparation of practical nurses and students were interviewed to provide insight into interpretation of survey questions. The survey response rate was 28.4% (n=1104/3883). Mean domain scores indicated a high level of confidence in patient safety competence (Nurses of Ontario >2years and in those who obtained their education outside of Canada. Faculty believed their approach to teaching and learning instilled a deep understanding of the limits to practical nurse autonomous practice. Practical nurses were confident in what they learned about patient safety in their educational programs. The high degree of patient safety competence may be a true reflection of practical nurses understanding of, and comfort with, the limits of their knowledge and, ultimately, the limits of their individual autonomous practice. Further exploration as to whether the questionnaire requires additional modification for use with practical nurse populations is warranted. However, this study provides the first examination of practical nurses' perspectives and

14 CFR 23.1143 - Engine controls.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine controls. 23.1143 Section 23.1143... Accessories § 23.1143 Engine controls. (a) There must be a separate power or thrust control for each engine... supercharger controls must be arranged to allow— (1) Separate control of each engine and each supercharger; and...

CERN survey team at KHI for photogrammetry of magnetic endcaps.Raphaël Goudard (CERN), Farshid Feyzi (from PSL) and Céline Humbertclaude (CERN) with KHI engineers.

CERN Multimedia

R. Loveless/U. of Wisconsin

2000-01-01

The endcap disk are surveyed by photogrammetric techniques at KHI during trial assembly. A CERN suvey team (Raphaël Goudard & Céline Humbertclaude) has instructed KHI engineers, how to proceed with the forthcoming disks.

An economic survey of the emerging tissue engineering industry.

Science.gov (United States)

Lysaght, M J; Nguy, N A; Sullivan, K

1998-01-01

The contemporary scope of worldwide tissue engineering research and development was estimated by totaling the relevant annual spending and other economic parameters of firms involved the field. Operating expenses allocated to tissue engineering in 1997 exceed $450 million and fund the activities of nearly 2,500 scientists and support personnel. Growth rate is 22.5% per annum. Most activity is centered in the United States. Government spending in this field represents investment and valuation represents a remarkable act of faith in the future of a technology yet to produce its first significant revenue-generating product.

Mid-section of a can-annular gas turbine engine with an improved rotation of air flow from the compressor to the turbine

Science.gov (United States)

Little, David A.; Schilp, Reinhard; Ross, Christopher W.

2016-03-22

A midframe portion (313) of a gas turbine engine (310) is presented and includes a compressor section with a last stage blade to orient an air flow (311) at a first angle (372). The midframe portion (313) further includes a turbine section with a first stage blade to receive the air flow (311) oriented at a second angle (374). The midframe portion (313) further includes a manifold (314) to directly couple the air flow (311) from the compressor section to a combustor head (318) upstream of the turbine section. The combustor head (318) introduces an offset angle in the air flow (311) from the first angle (372) to the second angle (374) to discharge the air flow (311) from the combustor head (318) at the second angle (374). While introducing the offset angle, the combustor head (318) at least maintains or augments the first angle (372).

End-of-life care in general practice: A cross-sectional, retrospective survey of 'cancer', 'organ failure' and 'old-age/dementia' patients

NARCIS (Netherlands)

Evans, N.C.; Pasman, H.R.W.; Donker, G.A.; Deliens, L.; Block, L.; Onwuteaka-Philipsen, B.D.

2014-01-01

Background: End-of-life care is often provided in primary care settings. Aim: To describe and compare general-practitioner end-of-life care for Dutch patients who died from 'cancer', 'organ failure' and 'old-age or dementia'. Design: A cross-sectional, retrospective survey was conducted within a

Refractometry in process engineering

Energy Technology Data Exchange (ETDEWEB)

Roepscher, H

1980-02-01

Following a brief historical introduction into general refractometry, the limiting angle refractometer is dealt with in the first section and the differential refractometer in the second section, as well as process engineering information on this measuring method being given. An attempt is made with an extensive close-to-practice description to introduce the planner and technician to this physical measuring method in process engineering in order that they be able to use it themselves if necessary. When properly applied, it can be a valuable help to process control in compliance with process automization.

Phosphonic Acids for Interfacial Engineering of Transparent Conductive Oxides

KAUST Repository

Paniagua, Sergio A.; Giordano, Anthony J.; Smith, O’ Neil L.; Barlow, Stephen; Li, Hong; Armstrong, Neal R.; Pemberton, Jeanne E.; Bredas, Jean-Luc; Ginger, David; Marder, Seth R.

2016-01-01

Transparent conducting oxides (TCOs), such as indium tin oxide and zinc oxide, play an important role as electrode materials in organic-semiconductor devices. The properties of the inorganic-organic interface - the offset between the TCO Fermi level and the relevant transport level, the extent to which the organic semiconductor can wet the oxide surface, and the influence of the surface on semiconductor morphology - significantly affect device performance. This review surveys the literature on TCO modification with phosphonic acids (PAs), which has increasingly been used to engineer these interfacial properties. The first part outlines the relevance of TCO surface modification to organic electronics, surveys methods for the synthesis of PAs, discusses the modes by which they can bind to TCO surfaces, and compares PAs to alternative organic surface modifiers. The next section discusses methods of PA monolayer deposition, the kinetics of monolayer formation, and structural evidence regarding molecular orientation on TCOs. The next sections discuss TCO work-function modification using PAs, tuning of TCO surface energy using PAs, and initiation of polymerizations from TCO-tethered PAs. Finally, studies that examine the use of PA-modified TCOs in organic light-emitting diodes and organic photovoltaics are compared. © 2016 American Chemical Society.

Phosphonic Acids for Interfacial Engineering of Transparent Conductive Oxides

KAUST Repository

Paniagua, Sergio A.

2016-05-26

Transparent conducting oxides (TCOs), such as indium tin oxide and zinc oxide, play an important role as electrode materials in organic-semiconductor devices. The properties of the inorganic-organic interface - the offset between the TCO Fermi level and the relevant transport level, the extent to which the organic semiconductor can wet the oxide surface, and the influence of the surface on semiconductor morphology - significantly affect device performance. This review surveys the literature on TCO modification with phosphonic acids (PAs), which has increasingly been used to engineer these interfacial properties. The first part outlines the relevance of TCO surface modification to organic electronics, surveys methods for the synthesis of PAs, discusses the modes by which they can bind to TCO surfaces, and compares PAs to alternative organic surface modifiers. The next section discusses methods of PA monolayer deposition, the kinetics of monolayer formation, and structural evidence regarding molecular orientation on TCOs. The next sections discuss TCO work-function modification using PAs, tuning of TCO surface energy using PAs, and initiation of polymerizations from TCO-tethered PAs. Finally, studies that examine the use of PA-modified TCOs in organic light-emitting diodes and organic photovoltaics are compared. © 2016 American Chemical Society.

Stirling engine application study

Science.gov (United States)

Teagan, W. P.; Cunningham, D.

1983-01-01

A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

Engineering Geological Conditions of the Ignalina NPP Region

International Nuclear Information System (INIS)

Buceviciute, S.

1996-01-01

During engineering geological mapping, the upper part (to 15-20 m depths) of the lithosphere was investigated at the Ignalina Nuclear Power Plant (INPP) for physical rock characteristics and recent exogenic geological processes and phenomena. The final result of engineering geological mapping was the division of the area into engineering geological regions. In this case five engineering geological regions have been distinguished. The Fig. shows a scheme of engineering geological regionalization of the area and the typical sections of the engineering geological regions. The sections show genesis, age, soil type, thickness of stratigraphic genetical complex for the rocks occurring in the zone of active effect of engineering buildings, as well as the conical strength and density of the distinguished soils. 1 fig., 1 tab

Creative Engineering for 2020

Directory of Open Access Journals (Sweden)

Sami Khorbotly

2014-02-01

Full Text Available The United States National Academy of Engineering's seminal work, The Engineer of 2020 – Visions of Engineering in the New Century, was written to prepare industrial, governmental, and academic institutions for the future of engineering. The authors of the report state, "Emphasis on the creative process will allow more effective leadership in the development and application of next-generation technologies to problems of the future." In 2011, 2012, and 2013, engineering undergraduates from the Valparaiso University College of Engineering (Valparaiso, Indiana, USA participated in a four-day off-site course focused on creativity, innovation, teamwork, and leading the creative process. The course was taught by members of the engineering faculty and included sessions and on-location tours (near Orlando, Florida that were led by instructors from an external training organization. Pre- and post-course surveys identify a significant improvement in the students' understanding of the roles of creativity, innovation, and the roles of leadership, communication, and teamwork in the creative process.

Welding engineering manual for constructing engineers. Pt. 2

International Nuclear Information System (INIS)

Neumann, A.

1986-01-01

The manual is a real treasure trove of knowledge and experience for the statics expert, the constructing engineer, and the welding engineer, who have to do with design and dimensioning of welding engineering work for steel structures, bridges, boilers, vessels, and pipes. Many practical examples are given together with numerous data that provide helpful information for the task of technical and economic design and dimensioning. Determination of efficient and appropriate cross-sectional dimensions and materials is the main goal of the manual. Structural steel engineering and installations subject to monitoring and inspection such as boilers, pipings, pressure vessels, and nuclear installations are the subject fields dealt with in separate chapters. The dimensioning rules presented are based on the regulations and technical codes valid in the GDR and the FRG. The catalogue of technical rules of the FRG concerning structural steel engineering and installations as above are given in supplementary chapters. (orig./HP) [de

46 CFR 15.915 - Engineer Officer Endorsements.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Engineer Officer Endorsements. 15.915 Section 15.915... REQUIREMENTS Equivalents § 15.915 Engineer Officer Endorsements. The following licenses and MMC officer... designated duty engineer license or endorsement authorizes service as chief or assistant engineer on vessels...

46 CFR 11.950 - Subjects for engineer endorsements.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Subjects for engineer endorsements. 11.950 Section 11....950 Subjects for engineer endorsements. Table 11.950—Subjects for Engineer Endorsements Unlimited chief engineer STM MTR Unlimited 1st asst. engineer STM MTR Unlimited 2nd asst. engineer STM MTR...

The magnitude of diabetes and its association with obesity in the slums of Nairobi, Kenya: results from a cross-sectional survey

NARCIS (Netherlands)

Oti, Samuel O.; van de Vijver, Steven J. M.; Agyemang, Charles; Kyobutungi, Catherine

2013-01-01

To assess the prevalence, awareness, treatment and control of diabetes and to examine the relationship of obesity with raised blood glucose in the slums of Nairobi, Kenya. We used data from a cross-sectional population-based survey, conducted in 2008-2009, involving a random sample of 5190 (2794 men

Electron microscopy for Engineers

International Nuclear Information System (INIS)

Jones, I P

2009-01-01

This paper reviews the application of (mainly) Transmission Electron Microscopy (TEM) in an engineering context. The first two sections are TEM and chemical in nature; the final three sections are more general and include aspects of Scanning Electron Microscopy (SEM).

40 CFR 1042.140 - Maximum engine power, displacement, power density, and maximum in-use engine speed.

Science.gov (United States)

2010-07-01

... cylinders having an internal diameter of 13.0 cm and a 15.5 cm stroke length, the rounded displacement would... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Maximum engine power, displacement... Maximum engine power, displacement, power density, and maximum in-use engine speed. This section describes...

Damage energy and displacement cross sections: survey and sensitivity

International Nuclear Information System (INIS)

Doran, D.G.; Parkin, D.M.; Robinson, M.T.

1976-10-01

Calculations of damage energy and displacement cross sections using the recommendations of a 1972 IAEA Specialists' Meeting are reviewed. The sensitivity of the results to assumptions about electronic energy losses in cascade development and to different choices respecting the nuclear cross sections is indicated. For many metals, relative uncertainties and sensitivities in these areas are sufficiently small that adoption of standard displacement cross sections for neutron irradiations can be recommended

40 CFR 35.926 - Value engineering (VE).

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Value engineering (VE). 35.926 Section... engineering (VE). (a) Value engineering proposal. All step 2 grant applications for projects having a... completion of VE analysis and submittal of VE summary reports). (b) Value engineering analysis. For projects...

Teen smoking cessation help via the Internet: a survey of search engines.

Science.gov (United States)

Edwards, Christine C; Elliott, Sean P; Conway, Terry L; Woodruff, Susan I

2003-07-01

The objective of this study was to assess Web sites related to teen smoking cessation on the Internet. Seven Internet search engines were searched using the keywords teen quit smoking. The top 20 hits from each search engine were reviewed and categorized. The keywords teen quit smoking produced between 35 and 400,000 hits depending on the search engine. Of 140 potential hits, 62% were active, unique sites; 85% were listed by only one search engine; and 40% focused on cessation. Findings suggest that legitimate on-line smoking cessation help for teens is constrained by search engine choice and the amount of time teens spend looking through potential sites. Resource listings should be updated regularly. Smoking cessation Web sites need to be picked up on multiple search engine searches. Further evaluation of smoking cessation Web sites need to be conducted to identify the most effective help for teens.

Encouraging the learning of hydraulic engineering subjects in agricultural engineering schools

Science.gov (United States)

Rodríguez Sinobas, Leonor; Sánchez Calvo, Raúl

2014-09-01

Several methodological approaches to improve the understanding and motivation of students in Hydraulic Engineering courses have been adopted in the Agricultural Engineering School at Technical University of Madrid. During three years student's progress and satisfaction have been assessed by continuous monitoring and the use of 'online' and web tools in two undergraduate courses. Results from their application to encourage learning and communication skills in Hydraulic Engineering subjects are analysed and compared to the initial situation. Student's academic performance has improved since their application, but surveys made among students showed that not all the methodological proposals were perceived as beneficial. Their participation in the 'online', classroom and reading activities was low although they were well assessed.

14 CFR 121.387 - Flight engineer.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Flight engineer. 121.387 Section 121.387..., FLAG, AND SUPPLEMENTAL OPERATIONS Airman and Crewmember Requirements § 121.387 Flight engineer. No... holding a current flight engineer certificate. For each airplane type certificated after January 1, 1964...

Parcels and Land Ownership, Parcels derived from legal descriptions and surveys. Tied to section monuments with coordinates derived from traditional survey and GPS., Published in 2013, 1:1200 (1in=100ft) scale, Portage County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Parcels and Land Ownership dataset current as of 2013. Parcels derived from legal descriptions and surveys. Tied to section monuments with coordinates derived from...

Honorary and ghost authorship in high impact biomedical journals: a cross sectional survey.

Science.gov (United States)

Wislar, Joseph S; Flanagin, Annette; Fontanarosa, Phil B; Deangelis, Catherine D

2011-10-25

To assess the prevalence of honorary and ghost authors in six leading general medical journals in 2008 and compare this with the prevalence reported by authors of articles published in 1996. Cross sectional survey using a web based questionnaire. International survey of journal authors. Sample of corresponding authors of 896 research articles, review articles, and editorial/opinion articles published in six general medical journals with high impact factors in 2008: Annals of Internal Medicine, JAMA, Lancet, Nature Medicine, New England Journal of Medicine, and PLoS Medicine. Self reported compliance with International Committee of Medical Journal Editors (ICMJE) criteria for authorship for all authors on the selected articles. A total of 630/896 (70.3%) corresponding authors responded to the survey. The prevalence of articles with honorary authorship or ghost authorship, or both, was 21.0% (95% CI 18.0% to 24.3%), a decrease from 29.2% reported in 1996 (P = 0.004). Based on 545 responses on honorary authorship, 96 articles (17.6% (95% CI 14.6% to 21.0%)) had honorary authors (range by journal 12.2% to 29.3%), a non-significant change from 1996 (19.3%; P = 0.439). Based on 622 responses on ghost authorship, 49 articles (7.9% (6.0% to 10.3%)) had ghost authors (range by journal 2.1% to 11.0%), a significant decline from 1996 (11.5%; P = 0.023). The prevalence of honorary authorship was 25.0% in original research reports, 15.0% in reviews, and 11.2% in editorials, whereas the prevalence of ghost authorship was 11.9% in research articles, 6.0% in reviews, and 5.3% in editorials. Evidence of honorary and ghost authorship in 21% of articles published in major medical journals in 2008 suggests that increased efforts by scientific journals, individual authors, and academic institutions are essential to promote responsibility, accountability, and transparency in authorship, and to maintain integrity in scientific publication.

Chinese Anesthesiologists Have High Burnout and Low Job Satisfaction: A Cross-Sectional Survey.

Science.gov (United States)

Li, Hange; Zuo, Mingzhang; Gelb, Adrian W; Zhang, Biao; Zhao, Xiaohui; Yao, Dongdong; Xia, Di; Huang, Yuguang

2018-03-01

The Chinese health care system must meet the needs of 19% of the world's population. Despite recent economic growth, health care resources are unevenly distributed. This creates the potential for job stress and burnout. We therefore conducted a survey among anesthesiologists in the Beijing-Tianjin-Hebei region focusing on job satisfaction and burnout to determine the incidence and associated factors. A large cross-sectional study was performed in the Beijing-Tianjin-Hebei region of China. The anonymous questionnaire was designed to collect and analyze the following information: (1) demographic characteristics and employer information; (2) job satisfaction assessed by Minnesota Satisfaction Questionnaire; (3) burnout assessed by Maslach Burnout Inventory-Human Service Survey; and (4) sleep pattern and physician-patient communication. Surveys were completed and returned from 211 hospitals (response rate 74%) and 2873 anesthesiologists (response rate 70%) during the period of June to August 2015. The overall job satisfaction score of Minnesota Satisfaction Questionnaire was 65.3 ± 11.5. Among the participants, 69% (95% confidence interval [CI], 67%-71%) met the criteria for burnout. The prevalence of high emotional exhaustion, high depersonalization, and low personal accomplishment was 57% (95% CI, 55%-59%), 49% (95% CI, 47%-51%), and 57% (95% CI, 55%-58%), respectively. Using multivariable logistic regression analysis, we found that age, hospital category, working hours per week, caseload per day, frequency of perceived challenging cases, income, and sleep quality were independent variables associated with burnout. Anesthesiologists with a high level of depersonalization tended to engage in shorter preoperative conversations with patients, provide less information about pain or the procedure, and to have less empathy with them. The anesthesiologists in the Beijing-Tianjin-Hebei region of China expressed a below-average level of job satisfaction, and suffered a

Antiretroviral Drug Use in a Cross-Sectional Population Survey in Africa: NIMH Project Accept (HPTN 043).

Science.gov (United States)

Fogel, Jessica M; Clarke, William; Kulich, Michal; Piwowar-Manning, Estelle; Breaud, Autumn; Olson, Matthew T; Marzinke, Mark A; Laeyendecker, Oliver; Fiamma, Agnès; Donnell, Deborah; Mbwambo, Jessie K K; Richter, Linda; Gray, Glenda; Sweat, Michael; Coates, Thomas J; Eshleman, Susan H

2017-02-01

Antiretroviral (ARV) drug treatment benefits the treated individual and can prevent HIV transmission. We assessed ARV drug use in a community-randomized trial that evaluated the impact of behavioral interventions on HIV incidence. Samples were collected in a cross-sectional survey after a 3-year intervention period. ARV drug testing was performed using samples from HIV-infected adults at 4 study sites (Zimbabwe; Tanzania; KwaZulu-Natal and Soweto, South Africa; survey period 2009-2011) using an assay that detects 20 ARV drugs (6 nucleoside/nucleotide reverse transcriptase inhibitors, 3 nonnucleoside reverse transcriptase inhibitors, and 9 protease inhibitors; maraviroc; raltegravir). ARV drugs were detected in 2011 (27.4%) of 7347 samples; 88.1% had 1 nonnucleoside reverse transcriptase inhibitors ± 1-2 nucleoside/nucleotide reverse transcriptase inhibitors. ARV drug detection was associated with sex (women>men), pregnancy, older age (>24 years), and study site (P < 0.0001 for all 4 variables). ARV drugs were also more frequently detected in adults who were widowed (P = 0.006) or unemployed (P = 0.02). ARV drug use was more frequent in intervention versus control communities early in the survey (P = 0.01), with a significant increase in control (P = 0.004) but not in intervention communities during the survey period. In KwaZulu-Natal, a 1% increase in ARV drug use was associated with a 0.14% absolute decrease in HIV incidence (P = 0.018). This study used an objective, biomedical approach to assess ARV drug use on a population level. This analysis identified factors associated with ARV drug use and provided information on ARV drug use over time. ARV drug use was associated with lower HIV incidence at 1 study site.

Motivational Factors, Gender and Engineering Education

Science.gov (United States)

Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne; Holgaard, Jette Egelund

2013-01-01

Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students reasons for choosing a career in engineering. We find that women are significantly more influenced by…

Brief 75 Health Physics Enrollments and Degrees Survey, 2014 Data

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-03-05

The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014. Enrollment information refers to the fall term 2014. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program equivalent to a major.

14 CFR 63.43 - Flight engineer courses.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight engineer courses. 63.43 Section 63...) AIRMEN CERTIFICATION: FLIGHT CREWMEMBERS OTHER THAN PILOTS Flight Engineers § 63.43 Flight engineer courses. An applicant for approval of a flight engineer course must submit a letter to the Administrator...

40 CFR 86.420-78 - Engine families.

Science.gov (United States)

2010-07-01

...) Rotary families. To be classed in the same engine family, rotary combustion cycle engines must be... characteristics. (e) At the manufacturer's option, rotary combustion cycle engines identical in all the respects... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Engine families. 86.420-78 Section 86...

46 CFR 121.620 - Propulsion engine control systems.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Propulsion engine control systems. 121.620 Section 121... Propulsion engine control systems. (a) A vessel must have two independent means of controlling each propulsion engine. Control must be provided for the engine speed, direction of shaft rotation, and engine...

40 CFR 90.410 - Engine test cycle.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine test cycle. 90.410 Section 90... Procedures § 90.410 Engine test cycle. (a) Follow the appropriate 6-mode test cycle for Class I, I-B and II engines and 2-mode test cycle for Class I-A, III, IV, and V engines when testing spark-ignition engines...

International Linear Collider Project and civil engineering technology

International Nuclear Information System (INIS)

2007-01-01

The objectives, activities and members of the Linear Collider Subcommittee of Japan Society of Civil Engineers (LC subcommittee) are described. The LC subcommittee consisted of five working groups such as the working group on planning and project and management, working group on geological survey, test, and environmental design, working group on structural and environmental design, working group on construction and maintenance and working group on information investigation of ILC. The policy of activities, work schedule, and report of each working group are described. Construction of ILC research facilities, standard cross section of tunnel, measurement results of long-term displacement of large underground cavities, the tunnel damages by earthquake in the south part of Hyogo prefecture in Japan, TBM method, collection of information are reported. (S.Y.)

Filipino therapists' experiences and attitudes of interprofessional education and collaboration: A cross-sectional survey.

Science.gov (United States)

Sy, Michael Palapal

2017-11-01

For the past more than 50 years, the World Health Organisation has acknowledged through empirical findings that health workers that learn together work together effectively to provide the best care for their patients. This study aimed to: (1) describe the perceived extent of interprofessional education (IPE) experience among Filipino occupational therapists (OTs), physical therapists (PTs), and speech-language-pathologists (SLPs); (2) identify their attitudes towards interprofessional collaboration (IPC); and (3) compare their attitudes towards IPC according to: prior IPE experience, classification of IPE experience, profession, years of practice, and practice setting. Using a cross-sectional survey design, a two-part questionnaire was sent to Filipino OTs, PTs, and SLPs working in the Philippines via an online survey application. The first part of the survey contained eight items of demographic information and the second part contained the 14-item Attitudes Towards Health Care Teams Scale (ATHCTS). Findings revealed that among the Filipino OT, PT and SLP respondents (n = 189), 70.9% had prior experience on IPE. Moreover, the three most commonly used IPE teaching-learning strategies were case discussion (clinical setting), small group discussion, didactics, and case discussion (community setting), while the use of didactics and case discussion (community setting) yielded more agreeable attitudes towards IPC. Among the 14 items in the ATHCTS, 11 were rated with agreeability and three items with neutrality. For professional variables, only the practice setting variable yielded a statistically significant finding confirming those working in the academia to be more agreeable towards IPC compared to other settings. However, years of practice and professional background variables both yielded no statistically significant difference implying no association between years of practice and attitude towards IPC and a homogenous composition among respondents, respectively

Competences in Demand within the Spanish Agricultural Engineering Sector

Science.gov (United States)

Perdigones, Alicia; Valera, Diego Luis; Moreda, Guillermo Pedro; García, Jose Luis

2014-01-01

The Rural Engineering Department (Technical University of Madrid) ran three competence surveys during the 2006-2007 and 2007-2008 academic years and evaluated: (1) the competences gained by agricultural engineer's degree and agricultural technical engineer's degree students (360 respondents); (2) the competences demanded by agricultural employers…

Relative Importance of Professional Practice and Engineering Management Competencies

Science.gov (United States)

Pons, Dirk

2016-01-01

Problem: The professional practice of engineering always involves engineering management, but it is difficult to know what specifically to include in the undergraduate curriculum. Approach: The population of New Zealand practising engineers was surveyed to determine the importance they placed on specific professional practice and engineering…

Report on survey in fiscal 2000. Survey on introduction of external accreditation system in engineer education (electronic information communications); 2000 nendo chosa hokokusho. Gijutsusha kyoiku no gaibu ninteiseido donyu ni kansuru chosa (Denshi joho tsushin)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In order to ensure international applicability of engineer education such as in universities and other organizations, and to improve the environment to supply human resources demanded by economic societies, surveys were performed on the external accreditation system for engineer education such as in universities and other organizations. In the field of electronic information communications, a committee to correspond to JABEE was established to perform system build-up, where the discussions were advanced. This field was classified into the following four specified areas: general aspect of electric/electronic/information communication engineering, electronics, information communications, and information systems. A supplementary explanation was given on the educational contents except for the information systems, based on which the self-assessment criteria and the evaluation table (for trial use) were prepared. For the examiner training, instructors were invited from ABET in the U.S.A., and training meetings were held. In addition, two committee members were sent as observers to the examinations being carried out at ABET. The trial experiments were conducted for the information communications program at the engineering department of Niigata University, and the electronic system engineering class at Sendai Radio Wave Industrial College. This paper summarizes the results of the examinations. (NEDO)

40 CFR 35.2114 - Value engineering.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Value engineering. 35.2114 Section 35... STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2114 Value engineering. (a) If the project has not received Step 2 grant assistance the applicant shall conduct value engineering...

14 CFR 25.1143 - Engine controls.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine controls. 25.1143 Section 25.1143... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Powerplant Controls and Accessories § 25.1143 Engine controls. (a) There must be a separate power or thrust control for each engine. (b) Power and thrust...

14 CFR 29.1143 - Engine controls.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine controls. 29.1143 Section 29.1143... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Powerplant Controls and Accessories § 29.1143 Engine controls. (a) There must be a separate power control for each engine. (b) Power controls must be arranged...

14 CFR 27.1143 - Engine controls.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine controls. 27.1143 Section 27.1143... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Powerplant Controls and Accessories § 27.1143 Engine controls. (a) There must be a separate power control for each engine. (b) Power controls must be grouped...

The association between patients? beliefs about medicines and adherence to drug treatment after stroke: a cross-sectional questionnaire survey

OpenAIRE

Sj?lander, Maria; Eriksson, Marie; Glader, Eva-Lotta

2013-01-01

OBJECTIVES: Adherence to preventive drug treatment is a clinical problem and we hypothesised that patients' beliefs about medicines and stroke are associated with adherence. The objective was to examine associations between beliefs of patients with stroke about stroke and drug treatment and their adherence to drug treatment. DESIGN: Cross-sectional questionnaire survey. SETTING: Patients with stroke from 25 Swedish hospitals were included. MEASUREMENTS: Questionnaires were sent to 989 patient...

Comparative survey of dynamic analyses of free-piston Stirling engines

Science.gov (United States)

Kankam, M. D.; Rauch, J. S.

1991-01-01

Reported dynamics analyses for evaluating the steady-state response and stability of free-piston Stirling engine (FPSE) systems are compared. Various analytical approaches are discussed to provide guidance on their salient features. Recommendations are made in the recommendations remarks for an approach which captures most of the inherent properties of the engine. Such an approach has the potential for yielding results which will closely match practical FPSE-load systems.

Turbine airfoil having outboard and inboard sections

Science.gov (United States)

Mazzola, Stefan; Marra, John J

2015-03-17

A turbine airfoil usable in a turbine engine and formed from at least an outboard section and an inboard section such that an inner end of the outboard section is attached to an outer end of the inboard section. The outboard section may be configured to provide a tip having adequate thickness and may extend radially inward from the tip with a generally constant cross-sectional area. The inboard section may be configured with a tapered cross-sectional area to support the outboard section.

Application of GPS in a high precision engineering survey network

International Nuclear Information System (INIS)

Ruland, R.; Leick, A.

1985-04-01

A GPS satellite survey was carried out with the Macrometer to support construction at the Stanford Linear Accelerator Center (SLAC). The network consists of 16 stations of which 9 stations were part of the Macrometer network. The horizontal and vertical accuracy of the GPS survey is estimated to be 1 to 2 mm and 2 to 3 mm respectively. The horizontal accuracy of the terrestrial survey, consisting of angles and distances, equals that of the GPS survey only in the ''loop'' portion of the network. All stations are part of a precise level network. The ellipsoidal heights obtained from the GPS survey and the orthometric heights of the level network are used to compute geoid undulations. A geoid profile along the linac was computed by the National Geodetic Survey in 1963. This profile agreed with the observed geoid within the standard deviation of the GPS survey. Angles and distances were adjusted together (TERRA), and all terrestrial observations were combined with the GPS vector observations in a combination adjustment (COMB). A comparison of COMB and TERRA revealed systematic errors in the terrestrial solution. A scale factor of 1.5 ppM +- .8 ppM was estimated. This value is of the same magnitude as the over-all horizontal accuracy of both networks. 10 refs., 3 figs., 5 tabs

Confirmatory radiological survey of the BORAX-V turbine building Idaho National Engineering Laboratory, Idaho Falls, Idaho

International Nuclear Information System (INIS)

Stevens, G.H.; Coleman, R.L.; Jensen, M.K.; Pierce, G.A.; Egidi, P.V.; Mather, S.K.

1993-01-01

An independent assessment of the remediation of the BORAX-V (Boiling Water Reactor Experiment) turbine building at the Idaho National Engineering Laboratory (INEL), Idaho Falls, Idaho, was accomplished by the Oak Ridge National Laboratory Pollutant Assessments Group (ORNL/PAG). The purpose of the assessment was to confirm the site's compliance with applicable Department of Energy guidelines. The assessment included reviews of both the decontamination and decommissioning Plan and data provided from the pre- and post-remedial action surveys and an independent verification survey of the facility. The independent verification survey included determination of background exposure rates and soil concentrations, beta-gamma and gamma radiation scans, smears for detection of removable contamination, and direct measurements for alpha and beta-gamma radiation activity on the basement and mezzanine floors and the building's interior and exterior walls. Soil samples were taken, and beta-gamma and gamma radiation exposure rates were measured on areas adjacent to the building. Results of measurements on building surfaces at this facility were within established contamination guidelines except for elevated beta-gamma radiation levels located on three isolated areas of the basement floor. Following remediation of these areas, ORNL/PAG reviewed the remedial action contractor's report and agreed that remediation was effective in removing the source of the elevated direct radiation. Results of all independent soil analyses for 60 Co were below the detection limit. The highest 137 Cs analysis result was 4.6 pCi/g; this value is below the INEL site-specific guideline of 10 pCi/g

Awareness about medical research among resident doctors in a tertiary care hospital: A cross-sectional survey

Directory of Open Access Journals (Sweden)

Dattatray B Pawar

2012-01-01

Full Text Available Context: Every medical practitioner should strive to contribute to the generation of evidence by conducting research. For carrying out research, adequate knowledge, practical skills, and development of the right attitude are crucial. A literature review shows that data regarding knowledge, attitude, and practices toward medical research, among resident doctors in India, is lacking. Aims: This study was conducted to assess research-related knowledge, attitude, and practices among resident doctors. Settings and Design: A cross-sectional survey was conducted using a pretested, structured, and pre-validated questionnaire. Materials and Methods: With approval of the Institutional Ethics Committee and a verbal consent, a cross-sectional survey among 100 resident doctors pursuing their second and third years in the MD and MS courses was conducted using a structured and pre-validated questionnaire. Statistical Analysis: Descriptive statistics were used to analyze the results. Results: The concept of research hypothesis was known to 58% of the residents. Ninety-eight percent of the residents were aware of the procedure to obtain informed consent. Seventy-six percent agreed that research training should be mandatory. Although 88% of the residents were interested in conducting research in future, 50% had participated in research other than a dissertation project, 28% had made scientific presentations, and only 4% had publications. Lack of time (74%, lack of research curriculum (42%, and inadequate facilities (38% were stated as major obstacles for pursuing research. Conclusions: Although resident doctors demonstrated a fairly good knowledge and positive attitude toward research, it did not translate into practice for most of them. There is a need to improve the existing medical education system to foster research culture among resident doctors

14 CFR 27.361 - Engine torque.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine torque. 27.361 Section 27.361... STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements Flight Loads § 27.361 Engine torque. (a) For turbine engines, the limit torque may not be less than the highest of— (1) The mean torque for maximum...

Nine-year comparison of presentation and management of acute coronary syndromes in Ireland: a national cross-sectional survey

Directory of Open Access Journals (Sweden)

Shelley Emer

2005-02-01

Full Text Available Abstract Background Shorter time to treatment is associated with lower mortality in acute coronary syndromes (ACS. A previous (1994 survey showed substantial delays for acute myocardial infarction (AMI in Ireland. The present study compared current practice with 1994 and surveyed acute coronary syndromes as a more complete contemporary evaluation of critical cardiac care than assessing AMI alone. Methods Following ethics committee approval, all centres (N = 39 admitting acute cardiac patients to intensive/coronary care unit provided information on 1365 episodes. A cross-sectional survey design was employed. Results Since 1994, median hospital arrival to thrombolysis time was reduced by 41% (76 to 45 minutes. Thrombolysis was delivered more often in the emergency department in 2003 (48% vs 2%. Thrombolysis when delivered in the emergency department was achieved faster than thrombolysis delivered in intensive/coronary care (35 mins v 60 mins; z = 5.62, p Conclusions Substantial improvements in time to thrombolysis have occurred since 1994, probably relating to treatment provision in emergency departments. Patient delay pre-hospital is still the principal impediment to effective treatment of ACS. A recent change of definition of AMI may have precluded an exact comparison between 1994 and 2003 data.

Adaptive geostatistical sampling enables efficient identification of malaria hotspots in repeated cross-sectional surveys in rural Malawi.

Directory of Open Access Journals (Sweden)

Alinune N Kabaghe

Full Text Available In the context of malaria elimination, interventions will need to target high burden areas to further reduce transmission. Current tools to monitor and report disease burden lack the capacity to continuously detect fine-scale spatial and temporal variations of disease distribution exhibited by malaria. These tools use random sampling techniques that are inefficient for capturing underlying heterogeneity while health facility data in resource-limited settings are inaccurate. Continuous community surveys of malaria burden provide real-time results of local spatio-temporal variation. Adaptive geostatistical design (AGD improves prediction of outcome of interest compared to current random sampling techniques. We present findings of continuous malaria prevalence surveys using an adaptive sampling design.We conducted repeated cross sectional surveys guided by an adaptive sampling design to monitor the prevalence of malaria parasitaemia and anaemia in children below five years old in the communities living around Majete Wildlife Reserve in Chikwawa district, Southern Malawi. AGD sampling uses previously collected data to sample new locations of high prediction variance or, where prediction exceeds a set threshold. We fitted a geostatistical model to predict malaria prevalence in the area.We conducted five rounds of sampling, and tested 876 children aged 6-59 months from 1377 households over a 12-month period. Malaria prevalence prediction maps showed spatial heterogeneity and presence of hotspots-where predicted malaria prevalence was above 30%; predictors of malaria included age, socio-economic status and ownership of insecticide-treated mosquito nets.Continuous malaria prevalence surveys using adaptive sampling increased malaria prevalence prediction accuracy. Results from the surveys were readily available after data collection. The tool can assist local managers to target malaria control interventions in areas with the greatest health impact and is

Job dissatisfaction and burnout of nurses in Hunan, China: A cross-sectional survey.

Science.gov (United States)

Zhou, Wenjuan; He, Guoping; Wang, Honghong; He, Ying; Yuan, Qun; Liu, Dan

2015-12-01

In this study, we focused on measuring levels of nurse burnout and job dissatisfaction in the daily practice of nurses in Hunan province, China, analyzed factors related to nurse burnout and job dissatisfaction, and explored the relationship between them. Previous studies have shown a high level of burnout and job dissatisfaction among nurses worldwide. A cross-sectional survey of 1100 nurses was conducted. The nurses worked at 20 hospitals in 11 cities and counties throughout China's Hunan province. Nurse burnout was measured by the Maslach Burnout Inventory. Nurse-rated job dissatisfaction was described using a four point scale, and work environment was measured using the Nursing Work Index - Practice Environment Scale. The results showed that nurses had high burnout scores and were dissatisfied with their jobs. Staffing, work environment, and work hours were all significantly associated with nurse burnout and job dissatisfaction. Adequate staffing, improved work environment, and reasonable work hours are related to decreasing nurse burnout and job dissatisfaction. © 2015 Wiley Publishing Asia Pty Ltd.

Productivity loss of caregivers of schizophrenia patients: a cross-sectional survey in Japan.

Science.gov (United States)

Sruamsiri, Rosarin; Mori, Yasuhiro; Mahlich, Jörg

2018-04-27

When a family member is diagnosed with schizophrenia, it causes stress to the caregiver that can eventually result in missed work days and lower work performance. This study aims at revealing productivity costs for caregivers of schizophrenia patients in Japan. A cross-sectional survey of caregivers was conducted and resulted in 171 respondents. The assessment of work productivity included calculating the costs of absenteeism, presenteeism and total productivity costs. This was accomplished using the "Work Productivity and Activity Impairment Questionnaire" (WPAI). A relative majority of caregivers in the sample provided care for their spouse (47%), 18% cared for their brother or sister and 16% provided care for their child. Per capita productivity costs totaled JPY 2.42 million, with JPY 2.36 million (97%) of that amount being due to presenteeism. The burden on caregivers is substantial enough to warrant structured support programs aimed at maintaining careers' physical and mental health, helping them provide more effective care to schizophrenia patients and eventually increase productivity at work.

30 CFR 250.510 - Diesel engine air intakes.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Diesel engine air intakes. 250.510 Section 250... engine air intakes. Diesel engine air intakes must be equipped with a device to shut down the diesel engine in the event of runaway. Diesel engines that are continuously attended must be equipped with...

Engineering students and their entrepreneurial intentions

Directory of Open Access Journals (Sweden)

Filipa Dionísio Vieira

2014-02-01

Full Text Available Promoting entrepreneurship is a key opportunity in the current environment, and engineering have recognized this criticism by including in their curricula basic financial disciplines. Given the current economic situation, provide the future engineer with concepts and techniques to move from knowledge to action, can improve the value perception of entrepreneurship as an alternative to employability on behalf of others. The aim of this paper is to present the preliminary results of the ENGEmpreende survey developed to measure the perceived attitudes and values of entrepreneurship by engineering students. Our sample involves 387 students of engineering courses from University of Minho. Portuguese engineering students report good levels of thoughts about entrepreneurship. Our study also found that their entrepreneurship predisposition has dependency relationships with gender, thoughts about entrepreneurship and entrepreneurial activities. The results of the perceived image of the entrepreneur suggest that students recognize the positive image of the entrepreneur in society, but have doubts about what is best: entrepreneur or employee in a large company? As perceived barriers, engineering students perceive as difficult to find a business idea or access to bank loans. Students’ perceived skills and competence suggest a perceived high adaptability, perseverance, technical confidence and orientation to results. The results of ENGEmpreende survey give an additional contribution to the theme of engineering entrepreneurship intentions through the identification of entrepreneurship predisposition, attitude to self-employment, entrepreneurial image, barriers to entrepreneurship, risk perception and technical confidence.

Fuels for homogeneous charge compression ignition (HCCI) engines. Automotive fuels survey. Part 6

Energy Technology Data Exchange (ETDEWEB)

Van Walwijk, M.

2001-01-01

Homogeneous charge compression ignition (HCCI) is a third mode of operation for internal combustion engines, beside spark ignition and conventional compression ignition. This report concentrates on the requirements that HCCI operation puts on fuels for these engines. For readers with limited time available, this summary describes the main findings. Policy makers that need some more background information may turn directly to chapter 7, 'Fuels for HCCI engines'. The rest of this report can be considered as a reference guide for more detailed information. The driving force to investigate HCCI engines is the potential of low emissions and simultaneously high energy efficiency. HCCI is gaining attention the last few years. However, HCCI engines are still in the research phase. After many experiments with prototype engines, people have now started working on computer simulations of the combustion process, to obtain a fundamental understanding of HCCI combustion and to steer future engine developments. In HCCI engines, an air/fuel mixture is prepared before it enters the combustion chamber. The homogeneous mixture is in the combustion chamber compressed to auto-ignition. Unlike in conventional engines, combustion starts at many different locations simultaneously and the speed of combustion is very high, so there is no flame front. Lean air/fuel mixtures (excess air) are used to control combustion speed. Because of the excess air, combustion temperature is relatively low, resulting in low NOx emissions. When the fuel is vaporised to a truly homogeneous mixture, complete combustion results in low particulate emissions. The most important advantages of HCCI engines are: - Emissions of NOx and particulates are very low. - Energy efficiency is high. It is comparable to diesel engines. - Many different fuels (one at a time) can be used in the HCCI concept. There are also some hurdles to overcome: - Controlling combustion is difficult, it complicates engine design

Domain Engineering, A Software Engineering Discipline in Need of Research

DEFF Research Database (Denmark)

Bjørner, Dines

2000-01-01

. The aim of this paper is to advocate: that researchers study these development method components, and that universities focus their education on basing well-nigh any course on the use of formal techniques: Specification and verification, and that software engineers take heed: Start applying formal......, and these again seem more stable than software designs. Thus, almost like the universal laws of physics, it pays off to first develop theories of domains. But domain engineering, as in fact also requirements engineering, really is in need of thoroughly researched development principles, techniques and tools...... techniques. A brief example of describing stake-holder perspectives will be given - on the background of which we then proceed to survey the notions of domain intrinsics, domain support technologies, domain management & organisation, domain rules & regulations, domain human behaviour, etc. We show elsewhere...

30 CFR 36.24 - Engine joints.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Engine joints. 36.24 Section 36.24 Mineral... Construction and Design Requirements § 36.24 Engine joints. (a) Cylinder head. The joint between the cylinder head and block of the engine shall be fitted with a metal or metal-clad gasket satisfactory to MSHA...

30 CFR 250.610 - Diesel engine air intakes.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Diesel engine air intakes. 250.610 Section 250... engine air intakes. No later than May 31, 1989, diesel engine air intakes shall be equipped with a device to shut down the diesel engine in the event of runaway. Diesel engines which are continuously...

Site study plan for EDBH [Engineering Design Boreholes] seismic surveys, Deaf Smith County site, Texas: Revision 1

International Nuclear Information System (INIS)

Hume, H.

1987-12-01

This site study plan describes seismic reflection surveys to run north-south and east-west across the Deaf Smith County site, and intersecting near the Engineering Design Boreholes (EDBH). Both conventional and shallow high-resolution surveys will be run. The field program has been designed to acquire subsurface geologic and stratigraphic data to address information/data needs resulting from Federal and State regulations and Repository program requirements. The data acquired by the conventional surveys will be common-depth- point, seismic reflection data optimized for reflection events that indicate geologic structure near the repository horizon. The data will also resolve the basement structure and shallow reflection events up to about the top of the evaporite sequence. Field acquisition includes a testing phase to check/select parameters and a production phase. The field data will be subjected immediately to conventional data processing and interpretation to determine if there are any anamolous structural for stratigraphic conditions that could affect the choice of the EDBH sites. After the EDBH's have been drilled and logged, including vertical seismic profiling, the data will be reprocessed and reinterpreted for detailed structural and stratigraphic information to guide shaft development. The shallow high-resulition seismic reflection lines will be run along the same alignments, but the lines will be shorter and limited to immediate vicinity of the EDBH sites. These lines are planned to detect faults or thick channel sands that may be present at the EDBH sites. 23 refs. , 7 figs., 5 tabs

18 CFR 367.80 - Supervision and engineering.

Science.gov (United States)

2010-04-01

... engineering. 367.80 Section 367.80 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... ACT Operating Expense Instructions § 367.80 Supervision and engineering. (a) The supervision and engineering includible in the operating expense accounts must consist of the pay and expenses of...

Applications of Systems Engineering to the Research, Design, and Development of Wind Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Dykes, K.; Meadows, R.; Felker, F.; Graf, P.; Hand, M.; Lunacek, M.; Michalakes, J.; Moriarty, P.; Musial, W.; Veers, P.

2011-12-01

This paper surveys the landscape of systems engineering methods and current wind modeling capabilities to assess the potential for development of a systems engineering to wind energy research, design, and development. Wind energy has evolved from a small industry in a few countries to a large international industry involving major organizations in the manufacturing, development, and utility sectors. Along with this growth, significant technology innovation has led to larger turbines with lower associated costs of energy and ever more complex designs for all major subsystems - from the rotor, hub, and tower to the drivetrain, electronics, and controls. However, as large-scale deployment of the technology continues and its contribution to electricity generation becomes more prominent, so have the expectations of the technology in terms of performance and cost. For the industry to become a sustainable source of electricity, innovation in wind energy technology must continue to improve performance and lower the cost of energy while supporting seamless integration of wind generation into the electric grid without significant negative impacts on local communities and environments. At the same time, issues associated with wind energy research, design, and development are noticeably increasing in complexity. The industry would benefit from an integrated approach that simultaneously addresses turbine design, plant design and development, grid interaction and operation, and mitigation of adverse community and environmental impacts. These activities must be integrated in order to meet this diverse set of goals while recognizing trade-offs that exist between them. While potential exists today to integrate across different domains within the wind energy system design process, organizational barriers such as different institutional objectives and the importance of proprietary information have previously limited a system level approach to wind energy research, design, and

Measuring the performance of vaccination programs using cross-sectional surveys: a likelihood framework and retrospective analysis.

Directory of Open Access Journals (Sweden)

Justin Lessler

2011-10-01

Full Text Available The performance of routine and supplemental immunization activities is usually measured by the administrative method: dividing the number of doses distributed by the size of the target population. This method leads to coverage estimates that are sometimes impossible (e.g., vaccination of 102% of the target population, and are generally inconsistent with the proportion found to be vaccinated in Demographic and Health Surveys (DHS. We describe a method that estimates the fraction of the population accessible to vaccination activities, as well as within-campaign inefficiencies, thus providing a consistent estimate of vaccination coverage.We developed a likelihood framework for estimating the effective coverage of vaccination programs using cross-sectional surveys of vaccine coverage combined with administrative data. We applied our method to measles vaccination in three African countries: Ghana, Madagascar, and Sierra Leone, using data from each country's most recent DHS survey and administrative coverage data reported to the World Health Organization. We estimate that 93% (95% CI: 91, 94 of the population in Ghana was ever covered by any measles vaccination activity, 77% (95% CI: 78, 81 in Madagascar, and 69% (95% CI: 67, 70 in Sierra Leone. "Within-activity" inefficiencies were estimated to be low in Ghana, and higher in Sierra Leone and Madagascar. Our model successfully fits age-specific vaccination coverage levels seen in DHS data, which differ markedly from those predicted by naïve extrapolation from country-reported and World Health Organization-adjusted vaccination coverage.Combining administrative data with survey data substantially improves estimates of vaccination coverage. Estimates of the inefficiency of past vaccination activities and the proportion not covered by any activity allow us to more accurately predict the results of future activities and provide insight into the ways in which vaccination programs are failing to meet their

Socio-demographic and clinical features of Irish iatrogenic hepatitis C patients: a cross-sectional survey.

LENUS (Irish Health Repository)

McKenna, Olivia

2009-01-01

BACKGROUND: A discrete sub-group of iatrogenically-acquired hepatitis C virus (HCV)-infected individuals exists in the Irish population on whom limited current research data is available. The aim of this study was to establish a current profile of the socio-demographic and clinical characteristics of the Irish iatrogenic hepatitis C population and to determine factors predicting symptoms experienced. METHODS: An anonymous, national, cross-sectional survey was conducted to explore this populations\\' self-reported health and social attributes. Data were collected on 290 respondents. RESULTS: Mean time since infection was 26 years. Eighty-four percent (n = 237) of respondents were female (mean age = 55.9 +\\/- 9.6 years). Hepatic and extra-hepatic symptoms were common (62% and 99% respectively). Fatigue and pain were frequent complaints while 89% reported diagnosed co-morbid disease. On logistic regression, female gender, age and co-morbid disease emerged as independent predictors of self-reported symptoms. CONCLUSION: This study describes the current status of the iatrogenically infected patient cohort in Ireland, adding to existing knowledge regarding the clinical course and consequences of HCV infection. Changing healthcare needs were shown by comparison with earlier surveys in this same population, in terms of disease progression, development of co-morbid disease and ageing.

Repeat participation in annual cross-sectional surveys of drug users and its implications for analysis.

Science.gov (United States)

Agius, P A; Aitken, C K; Breen, C; Dietze, P M

2018-06-04

We sought to establish the extent of repeat participation in a large annual cross-sectional survey of people who inject drugs and assess its implications for analysis. We used "porn star names" (the name of each participant's first pet followed by the name of the first street in which they lived) to identify repeat participation in three Australian Illicit Drug Reporting System surveys. Over 2013-2015, 2468 porn star names (96.2%) appeared only once, 88 (3.4%) twice, and nine (0.4%) in all 3 years. We measured design effects, based on the between-cluster variability for selected estimates, of 1.01-1.07 for seven key variables. These values indicate that the complex sample is (e.g.) 7% less efficient in estimating prevalence of heroin use (ever) than a simple random sample, and 1% less efficient in estimating number of heroin overdoses (ever). Porn star names are a useful means of tracking research participants longitudinally while maintaining their anonymity. Repeat participation in the Australian Illicit Drug Reporting System is low (less than 5% per annum), meaning point-prevalence and effect estimation without correction for the lack of independence in observations is unlikely to seriously affect population inference.

Engineering tribology

CERN Document Server

Stachowiak, Gwidon

2014-01-01

Engineering Tribology, 4th Edition is an established introductory reference focusing on the key concepts and engineering implications of tribology. Taking an interdisciplinary view, the book brings together the relevant knowledge from different fields needed to achieve effective analysis and control of friction and wear. Updated to cover recent advances in tribology, this new edition includes new sections on ionic and mesogenic lubricants, surface texturing, and multiscale characterization of 3D surfaces and coatings. Current trends in nanotribology are discussed, such as those relating to

Optimization and control methods in industrial engineering and construction

CERN Document Server

Wang, Xiangyu

2014-01-01

This book presents recent advances in optimization and control methods with applications to industrial engineering and construction management. It consists of 15 chapters authored by recognized experts in a variety of fields including control and operation research, industrial engineering, and project management. Topics include numerical methods in unconstrained optimization, robust optimal control problems, set splitting problems, optimum confidence interval analysis, a monitoring networks optimization survey, distributed fault detection, nonferrous industrial optimization approaches, neural networks in traffic flows, economic scheduling of CCHP systems, a project scheduling optimization survey, lean and agile construction project management, practical construction projects in Hong Kong, dynamic project management, production control in PC4P, and target contracts optimization.   The book offers a valuable reference work for scientists, engineers, researchers and practitioners in industrial engineering and c...

46 CFR 12.15-13 - Deck engine mechanic.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Deck engine mechanic. 12.15-13 Section 12.15-13 Shipping... ENDORSEMENTS Qualified Member of the Engine Department § 12.15-13 Deck engine mechanic. (a) An applicant for an endorsement as deck engine mechanic shall be a person holding an MMC or MMD endorsed as junior engineer. The...

Reactor engineering and engineered reactor safety in France

International Nuclear Information System (INIS)

1987-01-01

The proceedings give the full text of the lectures held by acknowledged French experts at the KTG Seminar in Mainz on March 10, 1987, all dealing with the leading topic of the current status of reactor engineering and development in France. Although the basic engineering principles and construction lines as well as the safety philosophy are the same in France as in West Germany, there have been distinctive developments over many years in the two countries that by now are not well known even among experts in this field, and hence cannot be properly assessed. Non-availability of relevant surveys or other type of literature in the German language reviewing the French developments is another factor that hitherto was a handicap to mutual exchange of information. The seminar was intended to close this gap. The proceedings should be read by all those in West Germany who wish to be informed about the developments in reactor engineering and reactor safety in France. (orig./DG) [de

Nursing and midwifery use, perceptions and barriers to evidence-based practice: a cross-sectional survey.

Science.gov (United States)

Fry, Margaret; Attawet, Jutharat

2018-03-01

The study aimed to explore how nurses and midwives obtain, use and embed evidence in everyday practice. The study design was cross-sectional survey method. The setting was one local health district in metropolitan Sydney, Australia. All nurses and midwives working within the local health district, with access to an email account, were invited to participate in the study. An online survey questionnaire was distributed to explore how evidence is obtained, used and embedded within the clinical setting. The data were analysed using descriptive statistics (frequency and percentages). Pearson's Chi-square tests were used for comparison between groups. There were 204 survey respondents. The findings identified that the majority (n = 157; 76.96%) of respondents obtained evidence primarily from clinical practice guidelines. The majority (n = 149; 73.04%) of respondents reportedly searched databases and used evidence related to general clinical practice. There was a statistical difference (χ = 17.069; df = 8; P = 0.029) when comparing leadership positions and other registered practitioner groups in the frequency of searching for evidence. Most respondents (n = 138; 67.65%) were confident in their ability to change practice on the basis of available evidence. Thematic analysis identified four barriers to sustaining evidence-based practice, which included: the need for time; the need for organizational and management support; the need for educational opportunities and challenges to accessing evidence. The study provided an understanding of how nurses and midwives obtain, use and embed evidence into everyday practice. More importantly, the role of leadership is significant to support a process of knowledge generation, research translation and the implementation of evidence into clinical settings.

40 CFR 1048.140 - What are the provisions for certifying Blue Sky Series engines?

Science.gov (United States)

2010-07-01

... Blue Sky Series engines? 1048.140 Section 1048.140 Protection of Environment ENVIRONMENTAL PROTECTION... Sky Series engines? This section defines voluntary standards for a recognized level of superior emission control for engines designated as “Blue Sky Series” engines. If you certify an engine family under...

Motivational factors, gender and engineering education

DEFF Research Database (Denmark)

Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne Schioldann

2013-01-01

Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students1 reasons for choosing a career in engineering. We find...... that women are significantly more influenced by mentors than men, while men tend to be more motivated by intrinsic and financial factors, and by the social importance of the engineering profession. Parental influence is low across all programmes and by differentiating between specific clusters of engineering......; however, gender and programme differentiation needs to be taken into account, and points towards diverse future strategies for attracting students to engineering education....

40 CFR 35.935-18 - Value engineering.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Value engineering. 35.935-18 Section 35.935-18 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... engineering. A grantee must comply with the applicable value engineering requirements of § 35.926. ...

Contributions to a shallow aquifer study by reprocessed seismic sections from petroleum exploration surveys, eastern Abu Dhabi, United Arab Emirates

Science.gov (United States)

Woodward, D.

1994-01-01

The US Geological Survey, in cooperation with the National Drilling Company of Abu Dhabi, is conducting a 4-year study of the fresh and slightly saline groundwater resources of the eastern Abu Dhabi Emirate. Most of this water occurs in a shallow aquifer, generally less than 150 m deep, in the Al Ain area. A critical part of the Al Ain area coincides with a former petroleum concession area where about 2780 km of vibroseis data were collected along 94 seismic lines during 1981-1983. Field methods, acquistion parameters, and section processing were originally designed to enhance reflections expected at depths ranging from 5000 to 6000 m, and subsurface features directly associated with the shallow aquifer system were deleted from the original seismic sections. The original field tapes from the vibroseis survey were reprocessed in an attempt to extract shallow subsurface information (depths less than 550 m) for investigating the shallow aquifer. A unique sequence of reproccessing parameters was established after reviewing the results from many experimental tests. Many enhancements to the resolution of shallow seismic reflections resulted from: (1) application of a 20-Hz, low-cut filter; (2) recomputation of static corrections to a datum nearer the land surface; (3) intensive velocity analyses; and (4) near-trace muting analyses. The number, resolution, and lateral continuity of shallow reflections were greatly enhanced on the reprocessed sections, as was the delineation of shallow, major faults. Reflections on a synthetic seismogram, created from a borehole drilled to a depth of 786 m on seismic line IQS-11, matcheddprecisely with shallow reflections on the reprocessed section. The 33 reprocessed sections were instrumental in preparing a map showing the major structural features that affect the shallow aquifer system. Analysis of the map provides a better understanding of the effect of these shallow features on the regional occurrence, movement, and quality of

Roadmapping towards Sustainability Proficiency in Engineering Education

Science.gov (United States)

Rodriguez-Andara, Alejandro; Río-Belver, Rosa María; Rodríguez-Salvador, Marisela; Lezama-Nicolás, René

2018-01-01

Purpose: The purpose of this paper is to deliver a roadmap that displays pathways to develop sustainability skills in the engineering curricula. Design/methodology/approach: The selected approach to enrich engineering students with sustainability skills was active learning methodologies. First, a survey was carried out on a sample of 189 students…

Aircraft Wing for Over-The-Wing Mounting of Engine Nacelle

Science.gov (United States)

Hahn, Andrew S. (Inventor); Kinney, David J. (Inventor)

2011-01-01

An aircraft wing has an inboard section and an outboard section. The inboard section is attached (i) on one side thereof to the aircraft's fuselage, and (ii) on an opposing side thereof to an inboard side of a turbofan engine nacelle in an over-the-wing mounting position. The outboard section's leading edge has a sweep of at least 20 degrees. The inboard section's leading edge has a sweep between -15 and +15 degrees, and extends from the fuselage to an attachment position on the nacelle that is forward of an index position defined as an imaginary intersection between the sweep of the outboard section's leading edge and the inboard side of the nacelle. In an alternate embodiment, the turbofan engine nacelle is replaced with an open rotor engine nacelle.

Effects of Cross-Border Engineer Exchange on Innovation

DEFF Research Database (Denmark)

Machikita, Tomohiro

2012-01-01

Using data from a survey to manufacturing firms, this paper attempts to detect sources of new technologies transferred to a well-established industrial district in Calabarzon, the Philippines, and a rapidly growing agglomeration in Hanoi, Vietnam. We find significant effects of exchange of engine...... engineers between the two industrial districts indicates difference in the stages of industrial development.......Using data from a survey to manufacturing firms, this paper attempts to detect sources of new technologies transferred to a well-established industrial district in Calabarzon, the Philippines, and a rapidly growing agglomeration in Hanoi, Vietnam. We find significant effects of exchange...... of engineers with customer or supplier on improvements in fundamental processes by firms in Hanoi. On the other hand, exchange of engineers significantly affects improvements in production and quality control of products newly introduced by firms in Calabarzon. The difference in the effects of exchanging...

Phase I: the pipeline-gas demonstration plant. Demonstration plant engineering and design. Volume 18. Plant Section 2700 - Waste Water Treatment

Energy Technology Data Exchange (ETDEWEB)

None

1981-05-01

Contract No. EF-77-C-01-2542 between Conoco Inc. and the US Department of Energy provides for the design, construction, and operation of a demonstration plant capable of processing bituminous caking coals into clean pipeline quality gas. The project is currently in the design phase (Phase I). This phase is scheduled to be completed in June 1981. One of the major efforts of Phase I is the process and project engineering design of the Demonstration Plant. The design has been completed and is being reported in 24 volumes. This is Volume 18 which reports the design of Plant Section 2700 - Waste Water Treatment. The objective of the Waste Water Treatment system is to collect and treat all plant liquid effluent streams. The system is designed to permit recycle and reuse of the treated waste water. Plant Section 2700 is composed of primary, secondary, and tertiary waste water treatment methods plus an evaporation system which eliminates liquid discharge from the plant. The Waste Water Treatment Section is designed to produce 130 pounds per hour of sludge that is buried in a landfill on the plant site. The evaporated water is condensed and provides a portion of the make-up water to Plant Section 2400 - Cooling Water.

Human Genetic Engineering: A Survey of Student Value Stances

Science.gov (United States)

Wilson, Sara McCormack; And Others

1975-01-01

Assesses the values of high school and college students relative to human genetic engineering and recommends that biology educators explore instructional strategies merging human genetic information with value clarification techniques. (LS)

Reliable and adequateengineering surveys for construction: the rule of two D

Directory of Open Access Journals (Sweden)

Rakitina Natal'ya Nikolaevna

2014-01-01

Full Text Available In the article the current state of quality supply of engineering surveys for construction is discussed. The main criteria for improving the design quality of buildings and structures for industrial, civil and other purposes is the reliability and adequacy of the results of engineering-geological surveys. The authors show the examples of inadequate study of engineering-geological conditions in the design of structures that led to emergency situations. Consideration of the reasons of accidents in structures showed that they are caused by lack of research conducted, the underestimation of the complexity of geological conditions. In the process of conducting geotechnical investigations the works were focused directly in the enclosure of a designed building, and the features of geological and hydrogeological conditions of the off-site were much more complex. In the process of construction during the sinking of the pit activation suffusion processes occurred, which led to an accident. Underestimation of the use of these geological funds in this example shows that even in the presence of fund materials, which are currently almost not increased, errors may occur due to the notorious savings for research. The requirements to ensuring the reliability and adequacy of engineering-geological surveys, which the authors call "The Rule of two D" (in Russian — Reliability and Adequacy, lie in the existing legal acts. The practice of fulfilling requirements to a large extend shows that the desire to save money at the stage of design and exploration works results in additional costs for additional design, recovery from accidents and works on a new project. The authors critically evaluated the development of engineering and geotechnical engineering instead of geological survey, which is not methodologically and theoretically substantiated and leads to the excluding from engineering surveys the consideration of the off-site geotechnical conditions directly below

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 21: Technological innovation and technical communications: Their place in aerospace engineering curricula. A survey of European, Japanese, and US Aerospace Engineers and Scientists

Science.gov (United States)

Pinelli, Thomas E.; Barclay, Rebecca O.; Holland, Maurita Peterson; Keene, Michael L.; Kennedy, John M.

1991-01-01

Aerospace engineers and scientists from Western Europe, Japan, and the United States were surveyed as part of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Questionnaires were used to solicit their opinions regarding the following: (1) the importance of technical communications to their profession; (2) the use and production of technical communications; and (3) their views about the appropriate content of an undergraduate course in technical communications. The ability to communicate technical information effectively was very important to the aerospace engineers and scientists who participated in the study. A considerable portion of their working week is devoted to using and producing technical information. The types of technical communications used and produced varied within and among the three groups. The type of technical communication product used and produced appears to be related to respondents' professional duties. Respondents from the three groups made similar recommendations regarding the principles, mechanics, and on-the-job communications to be included in an undergraduate technical communications course for aerospace majors.

46 CFR 184.620 - Propulsion engine control systems.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Propulsion engine control systems. 184.620 Section 184... Communications Systems § 184.620 Propulsion engine control systems. (a) A vessel must have two independent means of controlling each propulsion engine. Control must be provided for the engine speed, direction of...

Discounting of quantity surveying fees in South Africa

African Journals Online (AJOL)

by clients have forced Quantity Surveying firms into competition with ... Furthermore, 43% of consulting engineering firms were discounting their fees at a rate of .... Quantity. Surveying services are also offered in the fields of dispute resolution,.

Engineering Optics

CERN Document Server

Iizuka, Keigo

2008-01-01

Engineering Optics is a book for students who want to apply their knowledge of optics to engineering problems, as well as for engineering students who want to acquire the basic principles of optics. It covers such important topics as optical signal processing, holography, tomography, holographic radars, fiber optical communication, electro- and acousto-optic devices, and integrated optics (including optical bistability). As a basis for understanding these topics, the first few chapters give easy-to-follow explanations of diffraction theory, Fourier transforms, and geometrical optics. Practical examples, such as the video disk, the Fresnel zone plate, and many more, appear throughout the text, together with numerous solved exercises. There is an entirely new section in this updated edition on 3-D imaging.

Social capital and antenatal depression among Chinese primiparas: A cross-sectional survey.

Science.gov (United States)

Zhou, Chi; Ogihara, Atsushi; Chen, Hao; Wang, Weijue; Huang, Liu; Zhang, Baodan; Zhang, Xueni; Xu, Liangwen; Yang, Lei

2017-11-01

The aim of this study is to investigate the associations between social capital and antenatal depression among Chinese primiparas. A cross-sectional design was used and a questionnaire survey was conducted with 1471 participants using the intercept method at the provincial hospital in Zhejiang in 2016. Antenatal depression was evaluated using the Edinburgh Postnatal Depression Scale (EPDS) and social capital was assessed by the Chinese version of Social Capital Assessment Questionnaire (C-SCAQ). The prevalence of antenatal depression was assessed among Chinese primiparas in their third trimesters. The antenatal depression prevalence among sub-groups with lower social trust (ST), social reciprocity (SR), social network (SN), and social participation (SP) were significantly higher than those among higher score sub-groups. In the fully adjusted model, primiparas' antenatal depression was significantly associated with ST, SR, SN, and SP. Compared to the structural social capital, the cognitive social capital was a more crucial dimension to the prevalence of antenatal depression. For future community pregnancy health care management programs in China, it might be beneficial to add more social capital related intervention. Copyright © 2017 Elsevier B.V. All rights reserved.

A cross-sectional survey to assess community attitudes to introduction of Human papillomavirus vaccine.

Science.gov (United States)

Marshall, Helen; Ryan, Philip; Roberton, Don; Baghurst, Peter

2007-06-01

A vaccine to prevent human papilloma virus (HPV) infection has been licensed recently in the United States of America and Australia. The aim of this study was to assess community attitudes to the introduction of HPV vaccine in the State of South Australia. A cross-sectional survey was conducted by computer-aided telephone interviews in February 2006. The survey assessed adult and parental attitudes to the introduction of HPV vaccine to provide protection against a sexually transmitted disease caused by HPV and against cervical cancer. Two thousand interviews were conducted in metropolitan and rural households. Two per cent of respondents knew that persistent HPV infection caused cervical cancer and a further 7% were aware that the cause was viral. The majority of adults interviewed (83%) considered that both men and women should receive HPV vaccine and 77% of parents agreed that they would have their child/children immunised. Parents were mainly concerned about possible side effects of the vaccine (66%), with only 0.2% being concerned about discussing a sexually transmitted disease with their children and 5% being concerned that use of the vaccine may lead to promiscuity. Our findings suggest that public health education campaigns for HPV vaccination will find a majority of parents receptive to their children being vaccinated, but attention must be paid to appropriate explanation about HPV infection as the cause of cervical cancer and education about the safety of the HPV vaccine.

Knowledge, attitude and practice of therapeutic fasting among naturopathy physicians: across sectional national survey

Directory of Open Access Journals (Sweden)

Pradeep Nair

2015-12-01

Full Text Available Introduction: Fasting is a common ingredient of naturopathic prescription in India. However no studies have been conducted to establish the use, approach of naturopathy physicians towards fasting.The present study, a cross sectional survey was conducted to assess the attitude, use, belief and understanding about therapeutic fasting among the naturopathy physicians in India.Methods: A 12 item e-mail based questionnaire was sent among 334 naturopathy physicians, whichwere designed to obtain demographic data, practice characteristics and multiple choice and multipleresponse close-ended questions along with an open-response final question. Survey questionnaire datawas analyzed using descriptive statistics via frequency distribution and cross tabulations. Results: A convenient sample of total 257 participants was collected. Majority of the respondents wereprivate practitioners with an average experience of 5 years. 50% of the total population confirms theuse of fasting in their daily prescription which is mostly for 1-5 days (54% and for all diseases (38.5%.Physicians mostly prescribe short term mono fasting with fruits or juices (42.8% along with all othermodalities (61.5% to get desired effect. The end results of fasting therapy was quoted as satisfactory(51.7% whereas the misconceptions of the patients was a challenge for 1/3 and  most of them find it easy to administer in adults (85%. Conclusion:Naturopathy physicians use fasting as a first line management in almost all chronic andacute diseases. However there is a need for strengthening the evidence based practice to bestow bettercare.

Corrosion engineering

Energy Technology Data Exchange (ETDEWEB)

Fontana, M.G.

1986-01-01

This book emphasizes the engineering approach to handling corrosion. It presents corrosion data by corrosives or environments rather than by materials. It discusses the corrosion engineering of noble metals, ''exotic'' metals, non-metallics, coatings, mechanical properties, and corrosion testing, as well as modern concepts. New sections have been added on fracture mechanics, laser alloying, nuclear waste isolation, solar energy, geothermal energy, and the Statue of Liberty. Special isocorrosion charts, developed by the author, are introduced as a quick way to look at candidates for a particular corrosive.

Preparedness of HIV care and treatment clinics for the management of concomitant non–communicable diseases: a cross–sectional survey

OpenAIRE

Leung, Claudia; Aris, Eric; Mhalu, Aisa; Siril, Hellen; Christian, Beatrice; Koda, Happiness; Samatta, Talumba; Maghimbi, Martha Tsere; Hirschhorn, Lisa R.; Chalamilla, Guerino; Hawkins, Claudia

2016-01-01

Abstract Background In Sub-Saharan Africa, epidemiological studies have reported an increasing burden of non-communicable diseases (NCD) among people living with HIV. NCD management can be feasibly integrated into HIV care; however, clinic readiness to provide NCD services in these settings should first be assessed and gaps in care identified. Methods A cross-sectional survey conducted in July 2013 assessed the resources available for NCD care at 14 HIV clinics in Dar es Salaam, Tanzania. Sur...

Microwave and pulsed power engineering

International Nuclear Information System (INIS)

Hofer, W.W.

1984-01-01

The Microwave and Pulsed Power Engineering Thrust Area is responsible for developing the short-term and long-term engineering resources required to support the growing microwave and pulsed power engineering requirements of several LLNL Programs. The responsibility of this Thrust Area is to initiate applicable research and development projects and to provide capabilities and facilities to permit engineers involved in these and other programs to make significant contributions. In this section, the principal projects are described: dielectric failure prediction using partial discharge analysis, coating dielectrics to increase surface flashover potential, and the microwave generator experiment

Abstracts of the 17. world congress of the International Commission of Agriculture and Biosystems Engineering (CIGR) : sustainable biosystems through engineering

Energy Technology Data Exchange (ETDEWEB)

Savoie, P.; Villeneuve, J.; Morisette, R. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada). Soils and Crops Research and Development Centre] (eds.)

2010-07-01

This international conference provided a forum to discuss methods to produce agricultural products more efficiently through improvements in engineering and technology. It was attended by engineers and scientists working from different perspectives on biosystems. Beyond food, farms and forests can provide fibre, bio-products and renewable energy. Seven sections of CIGR were organized in the following technical sessions: (1) land and water engineering, (2) farm buildings, equipment, structures and environment, (3) equipment engineering for plants, (4) energy in agriculture, (5) management, ergonomics and systems engineering, (6) post harvest technology and process engineering, and (7) information systems. The Canadian Society of Bioengineering (CSBE) merged its technical program within the 7 sections of CIGR. Four other groups also held their activities during the conference. The American Society of Agricultural and Biological Engineers (ASABE) organized its 9th international drainage symposium and the American Ecological Engineering Society (AEES) held its 10th annual meeting. The International Network for Information Technology in Agriculture (INFITA), and the 8th world congress on computers in agriculture also joined CIGR 2010.

Relative importance of professional practice and engineering management competencies

Science.gov (United States)

Pons, Dirk

2016-09-01

Problem: The professional practice of engineering always involves engineering management, but it is difficult to know what specifically to include in the undergraduate curriculum. Approach: The population of New Zealand practising engineers was surveyed to determine the importance they placed on specific professional practice and engineering management competencies. Findings: Results show that communication and project planning were the two most important topics, followed by others as identified. The context in which practitioners use communication skills was found to be primarily with project management, with secondary contexts identified. The necessity for engineers to develop the ability to use multiple soft skills in an integrative manner is strongly supported by the data. Originality: This paper is one of only a few large-scale surveys of practising engineers to have explored the soft skill attributes. It makes a didactic contribution of providing a ranked list of topics which can be used for designing the curriculum and prioritising teaching effort, which has not previously been achieved. It yields the new insight that combinations of topics are sometimes more important than individual topics.

Poor stroke risk perception despite moderate public stroke awareness: insight from a cross-sectional national survey in Greece.

Science.gov (United States)

Ntaios, George; Melikoki, Vasiliki; Perifanos, George; Perlepe, Kalliopi; Gioulekas, Fotios; Karagiannaki, Anastasia; Tsantzali, Ioanna; Lazarou, Chrysanthi; Beradze, Nikolaos; Poulianiti, Evdoxia; Poulikakou, Matina; Palantzas, Theofanis; Kaditi, Stavrina; Perlepe, Fay; Sidiropoulos, George; Papageorgiou, Kyriaki; Papavasileiou, Vasileios; Vemmos, Konstantinos; Makaritsis, Konstantinos; Dalekos, George N

2015-04-01

Although stroke is the fourth cause of death in Western societies, public stroke awareness remains suboptimal. The aim of this study was to estimate stroke risk perception and stroke awareness in Greece through a cross-sectional telephone survey. A trained interview team conducted this cross-sectional telephone survey between February and April 2014 using an online structured questionnaire. Participants were selected using random digit dialing of landline and mobile telephone numbers with quota sampling weighted for geographical region based on the most recent General Population Census (2011). Between February and April 2014, 723 individuals (418 women [58%], 47.4 ± 17.8 years) agreed to respond. Among all respondents, 642 (88.8%) were able to provide at least 1 stroke risk factor; 673 respondents (93.08%) were able to provide correctly at least 1 stroke symptom or sign. When asked what would they do in case of acute onset of stroke symptoms, 497 (68.7%) responded that they would either call the ambulance or visit the closest emergency department. Only 35.3%, 18.9%, 17.2%, 20.7%, and 15.0% of respondents with atrial fibrillation, arterial hypertension, dyslipidemia, diabetes mellitus, and current smoking, respectively, considered themselves as being in high risk for stroke. Stroke risk perception in Greece is low despite moderate public stroke awareness. Copyright © 2015 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Premarital sexual intercourse among adolescents in Malaysia: a cross-sectional Malaysian school survey.

Science.gov (United States)

Lee, L K; Chen, P C Y; Lee, K K; Kaur, J

2006-06-01

Sexual intercourse among Malaysian adolescents is a major concern, especially with the worry of HIV/AIDS. This study was done to determine the prevalence of sexual intercourse among secondary school students aged 12 to 19 years in Negeri Sembilan, Malaysia. This is a cross-sectional school survey conducted on 4,500 adolescent students based on a structured questionnaire. Data were collected using the self-administered questionnaire (translated version of the Youth Risk Behaviour Surveillance in Bahasa Malaysia). The study showed that 5.4 percent of the total sample were reported to have had sexual intercourse. The proportion among male students who had had sex was higher (8.3 percent) compared with female students (2.9 percent). The mean age at first sexual intercourse was 15 years. One percent of students reported that they had been pregnant or had made someone else pregnant. Adolescent sexual intercourse was significantly associated with (1) socio-demographical factors (age, gender); (2) environmental factors (staying with parents); and (3) substance use (alcohol use, cigarette smoking, drug use), even after adjustment for demographical factors. The survey showed that 20.8 percent of respondents had taken alcohol, 14.0 percent had smoked cigarettes, 2.5 percent had tried marijuana, 1.2 percent had tried ecstasy pills, 2.6 percent had tried glue sniffing, 0.7 percent had tried heroin, and 0.7 percent had intravenous drugs. Prevalence of sexual intercourse among Malaysian adolescents was relatively low compared to developed countries. However, certain groups of adolescents tend to be at higher risk of engaging in sexual intercourse. This problem should be addressed early by targeting these groups of high-risk adolescents.

46 CFR 58.10-10 - Diesel engine installations.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Diesel engine installations. 58.10-10 Section 58.10-10... MACHINERY AND RELATED SYSTEMS Internal Combustion Engine Installations § 58.10-10 Diesel engine installations. (a) The requirements of § 58.10-5 (a), (c), and (d) shall apply to diesel engine installations...

Prevalence of HTLV-1/2 infections in Spain: A cross-sectional hospital-based survey.

Science.gov (United States)

Treviño, Ana; García, Juan; de Mendoza, Carmen; Benito, Rafael; Aguilera, Antonio; Ortíz de Lejarazu, Raul; Ramos, José M; Trigo, Matilde; Eirós, Jose M; Rodríguez-Iglesias, Manuel; Torres, Alvaro; Calderón, Enrique; Hernandez, Araceli; Gomez, Cesar; Marcaida, Goizane; Soriano, Vincent

2010-08-01

The presence of antibodies to human T-lymphotropic virus (HTLV) types 1 and 2 was examined in 5742 sera belonging to consecutive adult outpatients attended during June 2008 at 13 different hospitals across Spain. Overall, 58.8% were female. Foreigners represented 8% of the study population. Seven individuals were seropositive for HTLV-2 (overall prevalence 0.12%). No cases of HTLV-1 infection were found. All HTLV-2(+) subjects were Spanish natives, of whom six were coinfected with HIV-1 and five with hepatitis C virus (HCV). Moreover, all but one of the HTLV-2(+) subjects had been intravenous drug users. In summary, this cross-sectional survey suggests that the rate of HTLV infection in Spain is low, and is mostly represented by HTLV-2. Infected individuals are generally Spanish natives with a prior history of intravenous drug use and are coinfected with HIV-1 and/or HCV.

25 CFR 173.2 - Project engineer's authority.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Project engineer's authority. 173.2 Section 173.2 Indians... LANDS WITHDRAWN OR ACQUIRED IN CONNECTION WITH INDIAN IRRIGATION PROJECTS § 173.2 Project engineer's authority. The project engineer is the official charged with the responsibility for the enforcement of this...

Stress and psychosomatic symptoms in Chinese school children: cross-sectional survey.

Science.gov (United States)

Hesketh, Therese; Zhen, Yan; Lu, Li; Dong, Zhou Xu; Jun, Ye Xu; Xing, Zhu Wei

2010-02-01

The Chinese educational system is highly competitive from the start of primary school with great emphasis on academic performance and intolerance of failure. This study aimed to explore the pressures on primary schoolchildren, and to determine the relationship between these pressures and psychosomatic symptoms: abdominal pain and headache. Cross-sectional survey using self-completion questionnaires. 9- to 12-year-olds in primary schools in urban and rural areas of Zhejiang Province, eastern China. Proportion of children with defined school-related stressors and frequency of psychosomatic illness. Completed questionnaires were obtained from 2191 children. All stressors were common in boys and girls and in urban and rural schools. Eighty-one per cent worry 'a lot' about exams, 63% are afraid of the punishment of teachers, 44% had been physically bullied at least sometimes, with boys more often victims of bullying, and 73% of children are physically punished by parents. Over one-third of children reported psychosomatic symptoms at least once per week, 37% headache and 36% abdominal pain. All individual stressors were highly significantly associated with psychosomatic symptoms. Children identified as highly stressed (in the highest quartile of the stress score) were four times as likely to have psychosomatic symptoms. The competitive and punitive educational environment leads to high levels of stress and psychosomatic symptoms in Chinese primary schoolchildren. Measures to reduce unnecessary stress on children in schools should be introduced urgently.

Leadership training in a family medicine residency program: Cross-sectional quantitative survey to inform curriculum development.

Science.gov (United States)

Gallagher, Erin; Moore, Ainsley; Schabort, Inge

2017-03-01

To assess the current status of leadership training as perceived by family medicine residents to inform the development of a formal leadership curriculum. Cross-sectional quantitative survey. Department of Family Medicine at McMaster University in Hamilton, Ont, in December 2013. A total of 152 first- and second-year family medicine residents. Family medicine residents' attitudes toward leadership, perceived level of training in various leadership domains, and identified opportunities for leadership training. Overall, 80% (152 of 190) of residents completed the survey. On a Likert scale (1 = strongly disagree, 4 = neutral, 7 = strongly agree), residents rated the importance of physician leadership in the clinical setting as high (6.23 of 7), whereas agreement with the statement "I am a leader" received the lowest rating (5.28 of 7). At least 50% of residents desired more training in the leadership domains of personal mastery, mentorship and coaching, conflict resolution, teaching, effective teamwork, administration, ideals of a healthy workplace, coalitions, and system transformation. At least 50% of residents identified behavioural sciences seminars, a lecture and workshop series, and a retreat as opportunities to expand leadership training. The concept of family physicians as leaders resonated highly with residents. Residents desired more personal and system-level leadership training. They also identified ways that leadership training could be expanded in the current curriculum and developed in other areas. The information gained from this survey might facilitate leadership development among residents through application of its results in a formal leadership curriculum. Copyright© the College of Family Physicians of Canada.

13th New Mexico Analysis Seminar & Western Spring Sectional Meeting of the AMS

CERN Document Server

Marcantognini, Stefania; Stokolos, Alexander; Urbina, Wilfredo; Harmonic analysis, partial differential equations, complex analysis, Banach spaces, and operator theory : celebrating Cora Sadosky's life

2016-01-01

Covering a range of subjects from operator theory and classical harmonic analysis to Banach space theory, this book contains survey and expository articles by leading experts in their corresponding fields, and features fully-refereed, high-quality papers exploring new results and trends in spectral theory, mathematical physics, geometric function theory, and partial differential equations. Graduate students and researchers in analysis will find inspiration in the articles collected in this volume, which emphasize the remarkable connections between harmonic analysis and operator theory. Another shared research interest of the contributors of this volume lies in the area of applied harmonic analysis, where a new notion called chromatic derivatives has recently been introduced in communication engineering. The material for this volume is based on the 13th New Mexico Analysis Seminar held at the University of New Mexico, April 3-4, 2014 and on several special sections of the Western Spring Sectional Meeting at th...

Computer-Aided Engineering Education at the K.U. Leuven.

Science.gov (United States)

Snoeys, R.; Gobin, R.

1987-01-01

Describes some recent initiatives and developments in the computer-aided design program in the engineering faculty of the Katholieke Universiteit Leuven (Belgium). Provides a survey of the engineering curriculum, the computer facilities, and the main software packages available. (TW)

APPRAISAL OF INFORMATION NEEDS OF ENGINEERS IN INDONESIA

Directory of Open Access Journals (Sweden)

Utari Budihardjo

2011-12-01

Full Text Available This paper discusses reports of the surveys on information needs of engineers which have been conducted in Indonesia in the last ten years. It also covers technological transformation in Indonesia, such as micro level technology indicator within 10 strategic industries. Various data centers! iriformation centres of different subjects are included in this paper. Based on the above mention surveys, it is concluded that: 1. Communication among information providers and engineers, especially those who are dealing with research and development is still weak. 2. Most engineers in Indonesia are lacking ofiriformation about the availability of S&T information sources in the country.3. Information/data centers are seattered diverse in various subjects and they haven't been linked each other yet. 4. So far, the qualitiy of S&T data/information provided has not met with the industrial development needs in the country. 5 Promotion on information sources haven't reached all engineers especially those who are dealing with R&D activities.

7 CFR 2902.25 - 2-Cycle engine oils.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false 2-Cycle engine oils. 2902.25 Section 2902.25... Items § 2902.25 2-Cycle engine oils. (a) Definition. Lubricants designed for use in 2-cycle engines to... procurement preference for qualifying biobased 2-cycle engine oils. By that date, Federal agencies that have...

Education of nuclear engineering in Japan

International Nuclear Information System (INIS)

Ozawa, Yasutomo; Yamamuro, Nobuhiro

1979-01-01

The research Committee of Nuclear Engineering Education has two working groups. One group has carried out surveyes on the curriculums of nuclear engineering course of universities in Japan and the activities of graduates in the industrial worlds. The other group conducted an investigation on the present status of energy education in senior high schools. This is an interim report on the activity of the research committee. (author)

CDS User survey

CERN Multimedia

CERN Document Service

2011-01-01

  The CERN Document Server is launching a user survey in order to collect information relative to its search engine, submission interfaces, collaborative features and content organisation. With the view of re-shaping its collections and interfaces and to better integrate with the new INSPIRE platform that serves all HEP literature, CERN Document Server team invites you to take part in the survey. Your input is essential to provide us with useful information before setting up the new service and improve your interactions with CDS. Thanks for participating !  

Rehabilitation Engineering Sourcebook [and] Rehabilitation Engineering Sourcebook Supplement I.

Science.gov (United States)

Institute for Information Studies, Falls Church, VA.

Intended for use by rehabilitation counselors and work supervisors, the sourcebook contains 173 problems and solutions provided by rehabilitation engineering. A section titled "Guidelines for Formulating Problem Statements" is intended to summarize the most effective ways for either disabled individuals or rehabilitation practitioners to…

Training practitioners in preparing systematic reviews: a cross-sectional survey of participants in the Australasian Cochrane Centre training program

Directory of Open Access Journals (Sweden)

Silagy Chris

2002-06-01

Full Text Available Abstract Background Although systematic reviews of health care interventions are an invaluable tool for health care providers and researchers, many potential authors never publish reviews. This study attempts to determine why some people with interest in performing systematic reviews do not subsequently publish a review; and what steps could possibly increase review completion. Methods Cross-sectional survey by email and facsimile of the 179 participants in Australasian Cochrane Centre training events between 1998 and 2000. Results Ninety-two participants responded to the survey (51 percent. Response rate of deliverable surveys was 82 percent (92/112. The remainder of the participants had invalid or no contact information on file. More than 75 percent of respondents felt that the current workshops met their needs for training. The most critical barriers to completion of a Cochrane review were: lack of time (80 percent, lack of financial support (36 percent, methodological problems (23 percent and problems with group dynamics (10 percent. Conclusions Strategies to protect reviewer time and increase the efficiency of the review process may increase the numbers of trained reviewers completing a systematic review.

Doctors' personal health care choices: A cross-sectional survey in a mixed public/private setting

Directory of Open Access Journals (Sweden)

Chao David VK

2008-05-01

Full Text Available Abstract Background Among Western countries, it has been found that physicians tend to manage their own illnesses and tend not have their own independent family physicians. This is recognized as a significant issue for both physicians and, by extension, the patients under their care, resulting in initiatives seeking to address this. Physicians' personal health care practices in Asia have yet to be documented. Methods An anonymous cross-sectional postal questionnaire survey was conducted in Hong Kong, China. All 9570 medical practitioners in Hong Kong registered with the Hong Kong Medical Council in 2003 were surveyed. Chi-square tests and logistic regression models were applied. Results There were 4198 respondents to the survey; a response rate of 44%. Two-thirds of respondents took care of themselves when they were last ill, with 62% of these self-medicating with prescription medication. Physicians who were graduates of Hong Kong medical schools, those working in general practice and non-members of the Hong Kong College of Family Physicians were more likely to do so. Physician specialty was found to be the most influential reason in the choice of caregiver by those who had ever consulted another medical practitioner. Only 14% chose consultation with a FM/GP with younger physians and non-Hong Kong medical graduates having a higher likelihood of doing so. Seventy percent of all respondents believed that having their own personal physician was unnecessary. Conclusion Similar to the practice of colleagues in other countries, a large proportion of Hong Kong physicians self-manage their illnesses, take self-obtained prescription drugs and believe they do not need a personal physician. Future strategies to benefit the medical care of Hong Kong physicians will have to take these practices and beliefs into consideration.

Nurses' perceptions of medication adherence in schizophrenia: results of the ADHES cross-sectional questionnaire survey.

Science.gov (United States)

Emsley, Robin; Alptekin, Koksal; Azorin, Jean-Michel; Cañas, Fernando; Dubois, Vincent; Gorwood, Philip; Haddad, Peter M; Naber, Dieter; Olivares, José Manuel; Papageorgiou, Georgios; Roca, Miguel; Thomas, Pierre; Hargarter, Ludger; Schreiner, Andreas

2015-12-01

Poor adherence to antipsychotic treatment is a widespread problem within schizophrenia therapy with serious consequences including increased risks of relapse and rehospitalization. Mounting evidence supports the key roles that nurses play in monitoring patient progress and facilitating long-term treatment adherence. The Adherencia Terapéutica en la Esquizofrenia (ADHES) nurses' survey was designed to assess the opinions of nurses on the causes and management of partial/nonadherence to antipsychotic medication. A questionnaire-based cross-sectional survey of 4120 nurses from Europe, the Middle East and Africa. Interpretation of results was based on a descriptive comparison of responses. Nurses perceived 54% of patients seen in the preceding month to be partially/nonadherent to treatment. Most nurses (90%) reported some level of experience with administration of long-acting injectable (LAI) antipsychotics, with 24% of nurses administering >10 injections per month. The majority (85%) of nurses surveyed believed that improving adherence would improve patient outcomes. Nearly half (49%) reported that most of their patients depend on a family member or other nonprofessional carer to remind them to take their medication as prescribed. A similar proportion of nurses (43%) reported that most of their patients relied on a professional to remind them to take medication. Most nurses (92%) felt that ensuring continuous medication with LAI antipsychotics would yield long-term benefits for patients, but their opinion was that over a third of patients were unaware of LAI antipsychotic treatments. In a series of forced options, the strategy used most often by respondents (89%) to promote medication adherence was to build trusting relationships with patients while listening to and interpreting their needs and concerns. Respondents also rated this as the most effective strategy that they used (48%). Nurses are highly aware of adherence issues faced by their patients; further patient

Nurses’ perceptions of medication adherence in schizophrenia: results of the ADHES cross-sectional questionnaire survey

Science.gov (United States)

Emsley, Robin; Alptekin, Koksal; Azorin, Jean-Michel; Cañas, Fernando; Dubois, Vincent; Gorwood, Philip; Haddad, Peter M.; Naber, Dieter; Olivares, José Manuel; Papageorgiou, Georgios; Roca, Miguel; Thomas, Pierre; Hargarter, Ludger; Schreiner, Andreas

2015-01-01

Objectives: Poor adherence to antipsychotic treatment is a widespread problem within schizophrenia therapy with serious consequences including increased risks of relapse and rehospitalization. Mounting evidence supports the key roles that nurses play in monitoring patient progress and facilitating long-term treatment adherence. The Adherencia Terapéutica en la Esquizofrenia (ADHES) nurses’ survey was designed to assess the opinions of nurses on the causes and management of partial/nonadherence to antipsychotic medication. Methods: A questionnaire-based cross-sectional survey of 4120 nurses from Europe, the Middle East and Africa. Interpretation of results was based on a descriptive comparison of responses. Results: Nurses perceived 54% of patients seen in the preceding month to be partially/nonadherent to treatment. Most nurses (90%) reported some level of experience with administration of long-acting injectable (LAI) antipsychotics, with 24% of nurses administering >10 injections per month. The majority (85%) of nurses surveyed believed that improving adherence would improve patient outcomes. Nearly half (49%) reported that most of their patients depend on a family member or other nonprofessional carer to remind them to take their medication as prescribed. A similar proportion of nurses (43%) reported that most of their patients relied on a professional to remind them to take medication. Most nurses (92%) felt that ensuring continuous medication with LAI antipsychotics would yield long-term benefits for patients, but their opinion was that over a third of patients were unaware of LAI antipsychotic treatments. In a series of forced options, the strategy used most often by respondents (89%) to promote medication adherence was to build trusting relationships with patients while listening to and interpreting their needs and concerns. Respondents also rated this as the most effective strategy that they used (48%). Conclusion: Nurses are highly aware of adherence

A survey and experimental comparison of distributed SPARQL engines for very large RDF data

KAUST Repository

Abdelaziz, Ibrahim; Harbi, Razen; Khayyat, Zuhair; Kalnis, Panos

2017-01-01

Distributed SPARQL engines promise to support very large RDF datasets by utilizing shared-nothing computer clusters. Some are based on distributed frameworks such as MapReduce; others implement proprietary distributed processing; and some rely on expensive preprocessing for data partitioning. These systems exhibit a variety of trade-offs that are not well-understood, due to the lack of any comprehensive quantitative and qualitative evaluation. In this paper, we present a survey of 22 state-of-the-art systems that cover the entire spectrum of distributed RDF data processing and categorize them by several characteristics. Then, we select 12 representative systems and perform extensive experimental evaluation with respect to preprocessing cost, query performance, scalability and workload adaptability, using a variety of synthetic and real large datasets with up to 4.3 billion triples. Our results provide valuable insights for practitioners to understand the trade-offs for their usage scenarios. Finally, we publish online our evaluation framework, including all datasets and workloads, for researchers to compare their novel systems against the existing ones.

A survey and experimental comparison of distributed SPARQL engines for very large RDF data

KAUST Repository

Abdelaziz, Ibrahim

2017-10-19

Distributed SPARQL engines promise to support very large RDF datasets by utilizing shared-nothing computer clusters. Some are based on distributed frameworks such as MapReduce; others implement proprietary distributed processing; and some rely on expensive preprocessing for data partitioning. These systems exhibit a variety of trade-offs that are not well-understood, due to the lack of any comprehensive quantitative and qualitative evaluation. In this paper, we present a survey of 22 state-of-the-art systems that cover the entire spectrum of distributed RDF data processing and categorize them by several characteristics. Then, we select 12 representative systems and perform extensive experimental evaluation with respect to preprocessing cost, query performance, scalability and workload adaptability, using a variety of synthetic and real large datasets with up to 4.3 billion triples. Our results provide valuable insights for practitioners to understand the trade-offs for their usage scenarios. Finally, we publish online our evaluation framework, including all datasets and workloads, for researchers to compare their novel systems against the existing ones.

Organizational aspects of an experimental program for physical education with a strengthened course in professional and applied physical training of future electrical engineers in the railway sector

Directory of Open Access Journals (Sweden)

Anzhelika Yefremova

2017-06-01

Full Text Available Purpose: to develop an optimized program for physical education with a strengthened course in professional and applied physical training (PAPT for students of railway universities. Material & Methods: analysis and generalization of scientific sources and program-normative documentation on physical education of the higher educational institution of railway transport, survey. Results: the results of the survey of railroad specialists are given. Pilot studies have determined the nature and conditions of professional activity of electrical engineers of railway transport. The experimental program on physical education with the strengthened course of the PAPT of students of railway universities was developed and theoretically justified. Conclusion: structure of the experimental program on physical education with the strengthened course of the PAPT included a theoretical section (8 hours, methodical and practical exercises (6 hours, a practical section (114 hours and a control section (12 hours. The program focuses on improving professionally important physical and psycho-physiological qualities and functions, psychomotor skills and physical performance. The basis of the practical section was the physical exercises from different sections of the current basic curriculum.

Enhancing the role of nutrition professionals in weight management: A cross-sectional survey.

Science.gov (United States)

Bleich, Sara N; Bandara, Sachini; Bennett, Wendy; Cooper, Lisa A; Gudzune, Kimberly A

2015-02-01

(1) To determine the nonphysician health profession perceived as best qualified to provide weight management. (2) To examine nutrition professionals' current practice characteristics and perceived challenges and solutions for obesity care. (3) To examine the association between nutrition professionals' quality of training and self-efficacy in weight management. A 2014 national cross-sectional online survey of 500 U.S. nonphysician health professionals (100 from each: nutrition, nursing, behavioral/mental health, exercise, pharmacy) was analyzed. Nutrition professionals most commonly self-identified as the most qualified group to help patients lose weight (92%), sentiments supported by other health professionals (57%). The most often cited challenge was lack of patient adherence (87%). Among nutrition professionals, 77% reported receiving high-quality training in weight loss counseling. Nutrition professionals who reported high-quality training were significantly more likely to report confidence (95% vs. 48%) and success (74 vs. 50%) in helping obese patients lose weight (Pweight management counseling to obese patients. Yet nutrition professionals' receipt of high-quality weight management training appears critical to their success in helping patients lose weight. © 2014 The Obesity Society.

Mechanical Engineering Department Technical Review

International Nuclear Information System (INIS)

Carr, R.B.; Denney, R.M.

1981-01-01

The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication

Optimal control in thermal engineering

CERN Document Server

Badescu, Viorel

2017-01-01

This book is the first major work covering applications in thermal engineering and offering a comprehensive introduction to optimal control theory, which has applications in mechanical engineering, particularly aircraft and missile trajectory optimization. The book is organized in three parts: The first part includes a brief presentation of function optimization and variational calculus, while the second part presents a summary of the optimal control theory. Lastly, the third part describes several applications of optimal control theory in solving various thermal engineering problems. These applications are grouped in four sections: heat transfer and thermal energy storage, solar thermal engineering, heat engines and lubrication.Clearly presented and easy-to-use, it is a valuable resource for thermal engineers and thermal-system designers as well as postgraduate students.

A Study of the Relationship Between the Practice of Civil Engineering and Student Courses: Volume 1.

Science.gov (United States)

Bull, A. J. U.; Richardson, E.

Australian civil engineers were surveyed for a study intended to establish a model for development based on a list of the basic stock of knowledge and techniques that need to be mastered by the graduate civil engineer. Following a brief introduction and summary, chapters 3-7 review the survey objectives, civil engineering definitions and…

Undergraduate Engineers and Teachers: Can Students Be Both?

OpenAIRE

Zarske, Malinda S; Vadeen, Maia L; Tsai, Janet Y; Sullivan, Jacquelyn F; Carlson, Denise W

2017-01-01

Today’s college-aged students are graduating into a world that relies on multidisciplinary talents to succeed. Engineering college majors are more likely to find jobs after college that are outside of STEM (science, technology, engineering, and mathematics) fields, including jobs in healthcare, management, and social services. A survey of engineering undergraduate students at the University of Colorado Boulder in November 2012 indicated a desire by students to simultaneously pursue secondary ...

Characteristics of service users and provider organisations associated with experience of out of hours general practitioner care in England: population based cross sectional postal questionnaire survey

OpenAIRE

Warren, Fiona C; Abel, Gary; Lyratzopoulos, Georgios; Elliott, Marc N; Richards, Suzanne; Barry, Heather E; Roland, Martin; Campbell, John L

2015-01-01

Objective: To investigate the experience of users of out of hours general practitioner services in England, UK. Design: Population based cross sectional postal questionnaire survey. Setting: General Practice Patient Survey 2012-13. Main outcome measures: Potential associations between sociodemographic factors (including ethnicity and ability to take time away from work during working hours to attend a healthcare consultation) and provider organisation type (not for profit, NHS, or commercial)...

29 CFR 793.9 - “Chief engineer.”

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false âChief engineer.â 793.9 Section 793.9 Labor Regulations... Exemption § 793.9 “Chief engineer.” A chief engineer is an employee who primarily supervises the operation... such engineer may be employed, and in some cases he may be assisted by part-time workers from other...

Undergraduate Engineers and Teachers: Can Students Be Both?

Science.gov (United States)

Zarske, Malinda S.; Vadeen, Maia L.; Tsai, Janet Y.; Sullivan, Jacquelyn F.; Carlson, Denise W.

2017-01-01

Today's college-aged students are graduating into a world that relies on multidisciplinary talents to succeed. Engineering college majors are more likely to find jobs after college that are outside of STEM (science, technology, engineering, and mathematics) fields, including jobs in healthcare, management, and social services. A survey of…

Damage energy and displacement cross sections: survey and sensitivity. [Neutrons

Energy Technology Data Exchange (ETDEWEB)

Doran, D.G.; Parkin, D.M.; Robinson, M.T.

1976-10-01

Calculations of damage energy and displacement cross sections using the recommendations of a 1972 IAEA Specialists' Meeting are reviewed. The sensitivity of the results to assumptions about electronic energy losses in cascade development and to different choices respecting the nuclear cross sections is indicated. For many metals, relative uncertainties and sensitivities in these areas are sufficiently small that adoption of standard displacement cross sections for neutron irradiations can be recommended.

40 CFR 91.506 - Engine sample selection.

Science.gov (United States)

2010-07-01

... paragraph (b)(2) of this section. It defines one-tail, 95 percent confidence intervals. σ=actual test sample... individual engine x=mean of emission test results of the actual sample FEL=Family Emission Limit n=The actual... carry-over engine families: After one engine is tested, the manufacturer will combine the test with the...

40 CFR 91.410 - Engine test cycle.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine test cycle. 91.410 Section 91...) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test Procedures § 91.410 Engine test cycle. (a) The 5-mode cycle specified in Table 2 in appendix A to this subpart shall be followed...

Design and analysis of questionnaires for survey skills in chemical engineering

Directory of Open Access Journals (Sweden)

Susana Lucas

2011-09-01

Full Text Available 800x600 Normal 0 21 false false false CA X-NONE X-NONE The new reorganization of university education has involved relevant changes in teaching and learning methodologies in order to help students to learn more effectively and to develop important skills and competences demanded by the professional world. In this sense the new configuration of the degree in Chemical Engineering required the identification of the main general and transferable skills, the implementation of the new teaching and learning strategies necessary to achieve them and, in addition, an evaluation procedure for determining the importance and the degree of development of a student´s skills and competences. In this exercise, two obligatory chemical reactor engineering subjects of the still in effect Chemical Engineering degree were chosen as examples of competence-based learning disciplines. For each one, a significant group of transferable and specific skills were selected to be developed. The identification and selection of skills was made according to the recommendations of the European Federation of Chemical Engineering (EFCE together with the established requirements in the ministerial order for the new Chemical Engineering Degree (Ministerial order CIN/351/2009. In order to check the effectiveness of teaching strategies in helping students to acquire these abilities, specific questionnaires were designed. These tests allowed for the utility of the competences in question to be evaluated in terms of the students´ professional work as future chemical engineering graduates and also facilitated the perception of skill development acquired through the methodology implemented in these subjects. The results of the skill evaluation questionnaires revealed the importance that both university collectives (students and professors give to the development of transferable skills. These skills included the ability to communicate effectively (including in English, to work in

Are activity limitations associated with lower urinary tract symptoms in stroke patients? A cross-sectional, clinical survey

DEFF Research Database (Denmark)

Tibaek, Sigrid; Gard, Gunvor; Klarskov, Peter

2009-01-01

stroke patients were invited to complete four activity limitations measurements: Barthel Index, mobility velocity, mobility distance, mobility aids and one LUTS measurement: the Danish Prostatic Symptom Score (DAN-PSS-1) questionnaire. Of 519 stroke patients, 482 subjects were eligible. Results......Objective. To assess self-reported activity limitations in a clinical sample of stroke patients and to identify their association with prevalence, severity and impact on daily life of lower urinary tract symptoms (LUTS). Material and methods. A cross-sectional, clinical survey was initiated whereby...... time that activity limitations are closely related to LUTS in stroke patients and that rehabilitation should also be directed towards the treatment of LUTS....

Probabilistic Structural Analysis Methods for select space propulsion system components (PSAM). Volume 2: Literature surveys of critical Space Shuttle main engine components

Science.gov (United States)

Rajagopal, K. R.

1992-01-01

The technical effort and computer code development is summarized. Several formulations for Probabilistic Finite Element Analysis (PFEA) are described with emphasis on the selected formulation. The strategies being implemented in the first-version computer code to perform linear, elastic PFEA is described. The results of a series of select Space Shuttle Main Engine (SSME) component surveys are presented. These results identify the critical components and provide the information necessary for probabilistic structural analysis. Volume 2 is a summary of critical SSME components.

[Cross-sectional surveys on the use of recreational drug nitrous-acid-ester rush-poppers in men who have sex with men, Nanjing].

Science.gov (United States)

Zhu, Z P; Zhang, M; Xu, Y Y; Xu, W J; Liu, L; Wu, S S; Guo, L; Li, X

2017-02-10

Objective: To investigate the situation of recreational drug nitrous acid ester inhaler-rush poppers use in men who have sex with men (MSM). Methods: From April to June in 2014, October to December in 2014, April to June in 2015, three round cross-sectional surveys were conducted in MSM recruited in Nanjing by means of serum test and questionnaire survey. Results: Of the 1 721 MSM surveyed in three round, 19.3% (332/1 721) had ever used rush poppers, the proportions of MSM who used rush poppers in three round surveys showed an increasing trend (liner by liner χ (2)= 14.879, P =0.000), which was 12.6% (86/681), 27.6% (121/439) and 20.8% (125/601) respectively. Rush poppers use was associated with HIV infection significantly ( OR =1.676, 95 %CI : 1.201-2.339, P =0.002). Compared with MSM without rush poppers use, the MSM with rush poppers use were mainly aged poppers use. Conclusion: Rush poppers use was related with HIV infection in MSM in Nanjing.

40 CFR 90.1204 - Maintenance, aging and testing of engines.

Science.gov (United States)

2010-07-01

... engines. 90.1204 Section 90.1204 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... sample unless that engine experiences catastrophic mechanical failure or safety concerns requiring major... for engines with the amount of service and age of the test engine. (d) After aging each engine to at...

77 FR 50500 - California State Nonroad Engine Pollution Control Standards; California Nonroad Compression...

Science.gov (United States)

2012-08-21

... ENVIRONMENTAL PROTECTION AGENCY [AMS-FRL 9716-8] California State Nonroad Engine Pollution Control Standards; California Nonroad Compression Ignition Engines--In-Use Fleets; Authorization Request... emissions control of new engines not listed under section 209(e)(1). The section 209(e) rule and its...

Why Do Women Leave Science and Engineering?

OpenAIRE

Hunt, Jennifer

2012-01-01

I use the 1993 and 2003 National Surveys of College Graduates to examine the higher exit rate of women compared to men from science and engineering relative to other fields. I find that the higher relative exit rate is driven by engineering rather than science, and show that 60\\% of the gap can be explained by the relatively greater exit rate from engineering of women dissatisfied with pay and promotion opportunities. Contrary to the existing literature, I find that family--related constraint...

International travel in the immunocompromised patient: a cross-sectional survey of travel advice in 254 consecutive patients.

Science.gov (United States)

Bialy, C; Horne, K; Dendle, C; Kanellis, J; Littlejohn, G; Ratnam, I; Woolley, I

2015-06-01

Our primary aim was to determine the rate of overseas travel in immunocompromised individuals attending appropriate clinics at an Australian tertiary care hospital. We also aimed to characterise health-seeking behaviour prior to travel and investigated sources of pre-travel advice, compared travel patterns and activities between three specific immunosuppressed groups, and examined pre-immunosuppression patient serology. We implemented a cross-sectional survey of patients between February and August 2012. This survey was implemented among three outpatient populations at Monash Medical Centre, an Australian tertiary care hospital. We recruited 254 immunosuppressed adults from three patient populations: human immunodeficiency virus-positive individuals, renal transplant patients and rheumatology patients requiring immunosuppressive therapy. No clinical intervention was performed. In the 10 years preceding the survey, 153 (60.2%) participants reported international travel. Of these, 105 (68.6%) were immunosuppressed at the time of travel. These patients were 47.6% male and 60% Australian born. Forty per cent were visiting friends and relatives as part of their travel. Fifty-four per cent of those immunocompromised at the time of travel were going to high-risk destinations. Pathology files indicated that serological screening was frequently not performed prior to immunosuppression in the renal transplant and rheumatology groups. Immunocompromised patients often travel to high-risk destinations with limited or inadequate pre-travel preparations. Doctors caring for the immunocompromised should be aware of travel risks, suitable vaccination protocols and when to refer to specialist travel clinics. © 2015 Royal Australasian College of Physicians.

46 CFR 11.542 - Endorsement as chief engineer (MODU).

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Endorsement as chief engineer (MODU). 11.542 Section 11... REQUIREMENTS FOR OFFICER ENDORSEMENTS Professional Requirements for Engineer Officer § 11.542 Endorsement as chief engineer (MODU). To qualify for an endorsement as chief engineer (MODU) an applicant must: (a...

46 CFR 11.544 - Endorsement as assistant engineer (MODU).

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Endorsement as assistant engineer (MODU). 11.544 Section... REQUIREMENTS FOR OFFICER ENDORSEMENTS Professional Requirements for Engineer Officer § 11.544 Endorsement as assistant engineer (MODU). To qualify for an endorsement as assistant engineer (MODU) an applicant must: (a...

48 CFR 227.7206 - Contracts for architect-engineer services.

Science.gov (United States)

2010-10-01

... Rights in Computer Software and Computer Software Documentation 227.7206 Contracts for architect-engineer services. Follow 227.7107 when contracting for architect-engineer services. ...-engineer services. 227.7206 Section 227.7206 Federal Acquisition Regulations System DEFENSE ACQUISITION...

Mental Health Status of Double Minority Adolescents: Findings from National Cross-Sectional Health Surveys.

Science.gov (United States)

Chiang, Szu-Ying; Fleming, Theresa; Lucassen, Mathijs; Fenaughty, John; Clark, Terryann; Denny, Simon

2017-06-01

Little population-based work has been published about the mental health of adolescents with both sexual/gender (SG) and ethnic minority (i.e. double minority) status. This study aimed to provide an overview on their mental health. Analysis of data from a total of 17,607 high school students from New Zealand's 2007 and 2012 cross-sectional nationally representative Adolescent Health Surveys, including a total of 1306 (7.4%) SG minority participants, of whom 581 (3.3%) were also an ethnic minority. SG minority status, minority ethnicity, and female sex were associated with higher mental distress and poorer well-being. Generally speaking, double minority students reported poorer mental health than SG majority students of the same ethnicity, but reported better mental health than SG minority New Zealand European students. Explanations and future directions for research were suggested to further explore how double minority students negotiate mental health in the context of their communities/cultures in New Zealand.

30 CFR 77.1105 - Internal combustion engines; fueling.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Internal combustion engines; fueling. 77.1105 Section 77.1105 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE... COAL MINES Fire Protection § 77.1105 Internal combustion engines; fueling. Internal combustion engines...

Improving immunization in Afghanistan: results from a cross-sectional community-based survey to assess routine immunization coverage

Directory of Open Access Journals (Sweden)

Raveesha R. Mugali

2017-04-01

Full Text Available Abstract Background Despite progress in recent years, Afghanistan is lagging behind in realizing the full potential of immunization. The country is still endemic for polio transmission and measles outbreaks continue to occur. In spite of significant reductions over the past decade, the mortality rate of children under 5 years of age continues to remain high at 91 per 1000 live births. Methods The study was a descriptive community-based cross sectional household survey. The survey aimed to estimate the levels of immunization coverage at national and province levels. Specific objectives are to: establish valid baseline information to monitor progress of the immunization program; identify reasons why children are not immunized; and make recommendations to enhance access and quality of immunization services in Afghanistan. The survey was carried out in all 34 provinces of the country, with a sample of 6125 mothers of children aged 12–23 months. Results Nationally, 51% of children participating in the survey received all doses of each antigen irrespective of the recommended date of immunization or recommended interval between doses. About 31% of children were found to be partially vaccinated. Reasons for partial vaccination included: place to vaccinate child too far (23%, not aware of the need of vaccination (17%, no faith in vaccination (16%, mother was too busy (15%, and fear of side effects (11%. Conclusion The innovative mechanism of contracting out delivery of primary health care services in Afghanistan, including immunization, to non-governmental organizations is showing some positive results in quickly increasing coverage of essential interventions, including routine immunization. Much ground still needs to be covered with proper planning and management of resources in order to improve the immunization coverage in Afghanistan and increase survival and health status of its children.

Understanding the Leaky Engineering Pipeline: Motivation and Job Adaptability of Female Engineers

Science.gov (United States)

Saraswathiamma, Manjusha Thekkedathu

2010-01-01

This dissertation is a mixed-method study conducted using qualitative grounded theory and quantitative survey and correlation approaches. This study aims to explore the motivation and adaptability of females in the engineering profession and to develop a theoretical framework for both motivation and adaptability issues. As a result, this study…

Engineering department annual progress report 1 January -31 December 1978

International Nuclear Information System (INIS)

1979-07-01

A representative survey of the activities of the Engineering Department during 1978 is given followed by brief presentation of selected activities. Main activity areas are structural mechanics, engineering services, and technical support service and logistics. (author)

The Sooner Lunar Schooner: Lunar engineering education

Science.gov (United States)

Miller, D. P.; Hougen, D. F.; Shirley, D.

2003-06-01

The Sooner Lunar Schooner is a multi-disciplinary ongoing project at the University of Oklahoma to plan, design, prototype, cost and (when funds become available) build/contract and fly a robotic mission to the Moon. The goal of the flight will be to explore a small section of the Moon; conduct a materials analysis of the materials left there by an Apollo mission thirty years earlier; and to perform a selenographic survey of areas that were too distant or considered too dangerous to be done by the Apollo crew. The goal of the Sooner Lunar Schooner Project is to improve the science and engineering educations of the hundreds of undergraduate and graduate students working on the project. The participants, while primarily from engineering and physics, will also include representatives from business, art, journalism, law and education. This project ties together numerous existing research programs at the University, and provides a framework for the creation of many new research proposals. The authors were excited and motivated by the Apollo missions to the Moon. When we asked what we could do to similarly motivate students we realized that nothing is as exciting as going to the Moon. The students seem to agree.

40 CFR 86.347-79 - Alternative calculations for diesel engines.

Science.gov (United States)

2010-07-01

... Emission Regulations for New Gasoline-Fueled and Diesel-Fueled Heavy-Duty Engines; Gaseous Exhaust Test Procedures § 86.347-79 Alternative calculations for diesel engines. (a) This section applies to Diesel engines only. Gasoline-fueled engines must use the calculations in § 86.345. (b) For Diesel engines, the...

Sleep Duration and Quality in Pregnant Women: A Cross-Sectional Survey in China

Directory of Open Access Journals (Sweden)

Xianglong Xu

2017-07-01

Full Text Available Objectives: Good maternal health and fetal development require sufficient and good quality of sleep during pregnancy. This study investigated sleep duration and quality in pregnant women, assessing factors with possibly influence on sleep. Method: A cross-sectional survey was conducted on pregnant women between June and August in 2015 in 16 hospitals in five provinces in China. A total of 2345 pregnant women aged 18 years and older were surveyed. Insufficient sleeping duration was defined as sleeping of less than 7 h per day. Excessive sleep duration was defined as sleeping of more than 9 h per day. Results: A total of 561 (23.9% participants reported insufficient sleeping duration, whereas 485 (20.9% claimed excessive sleep duration. A total of 358 (15.2% of pregnant women reported problems regarding sleep quality. Compared to pregnant women with sufficient sleeping duration, those with insufficient sleeping duration were prone to have poor sleep quality, whereas those with excessive sleeping duration featured low possibility of poor sleep quality. High-risk groups of insufficient sleep duration include women of Han nationality, with siblings, in their first trimester of pregnancy, receiving care in low-capacity/quality hospital settings, and with daily or 1–3 days of secondhand smoke exposure. High-risk groups of excessive sleep duration include women living in rural areas, unemployed, in their third trimester of pregnancy, and receiving care in medium-capacity/quality hospital settings. High-risk groups of poor sleep quality include women of non-Han nationality, low income level, in their third trimester of pregnancy, and with insufficient sleep duration. Conclusions: Insufficient/excessive sleep duration and poor sleep quality commonly occur during pregnancy in China. Findings provide a better understanding of the influencing factors of insufficient/excessive sleep duration and poor quality of sleep. These findings have some implications

Engineering Ethics : The Second Report on Student Awareness and Course Methodology

Science.gov (United States)

Abe, Takao; Hachimori, Akira; Honywood, Michael

This paper is the second one detailing the findings of a questionnaire survey administered to gauge respondents' awareness of engineering ethics. The survey was carried out with the cooperation of Japanese, South Korean, and Chinese universities as well as a number of Japanese corporations. Our findings indicate that while students and company employees alike generally exhibit an appetite for learning about engineering ethics, South Korean and Chinese students have adopted a posture that is more conducive to such study than their Japanese counterparts. We also discovered a number of other differences rooted in students' nationality. Engineering ethics content seems to receive little attention in corporate training programs. Small and medium size companies in particular may not be addressing questions of engineering ethics in an aggressive manner.

Software engineering from a Langley perspective

Science.gov (United States)

Voigt, Susan

1994-01-01

A brief introduction to software engineering is presented. The talk is divided into four sections beginning with the question 'What is software engineering', followed by a brief history of the progression of software engineering at the Langley Research Center in the context of an expanding computing environment. Several basic concepts and terms are introduced, including software development life cycles and maturity levels. Finally, comments are offered on what software engineering means for the Langley Research Center and where to find more information on the subject.

Restaurant smoking sections in South Africa and the perceived impact of the proposed smokefree laws: Evidence from a nationally representative survey

Directory of Open Access Journals (Sweden)

M Little

2018-03-01

Full Text Available Background. The South African Minister of Health announced in 2016 that he intends to introduce tobacco control legislation that will prohibit smoking in restaurants. This will substantially strengthen the Tobacco Products Control Act (1993, as amended, which currently allows restaurants to have a dedicated, enclosed indoor smoking area.Objectives. To analyse current smoking policies of restaurants, whether and how these policies have changed over the past decade, and restaurateurs’ attitudes to the proposed legislative changes.Methods. From a population of nearly 12 000 restaurants, derived from four websites, we sampled 2 000 restaurants, stratifying by province and type (independent v. chain and disproportionately sampling small strata to ensure meaningful analysis. We successfully surveyed 741 restaurants, mostly by phone. We also surveyed 60 franchisors from a population of 82 franchisors.Results. Of the restaurants sampled, 44% were 100% smoke-free, 44% had smoking sections outside, 11% had smoking sections inside, and 1% allowed smoking anywhere. Smoking areas were more common in independent restaurants (62% than franchised restaurants (43%. Of the restaurants with a smoking section, 33% reported that the smoking sections were busier than the non-smoking sections. Twenty-three percent of restaurants had made changes to their smoking policies in the past 10 years, mostly removing or reducing the size of the smoking sections. Customer requests (39%, compliance with the law (35% and cost and revenue pressures (14% were the main reasons for changing smoking policies. Of the restaurant respondents 91% supported the current legislation, while 63% supported the proposed legislative changes; 68% of respondents who were aware of the proposed legislation supported it, compared with 58% of respondents who were not aware of the proposed legislation.Conclusions. In contrast to the vehement opposition to the 1999 legislation, which resulted

Implementation of the surgical safety checklist in Switzerland and perceptions of its benefits: cross-sectional survey.

Directory of Open Access Journals (Sweden)

Stéphane Cullati

Full Text Available OBJECTIVES: To examine the implementation of the Surgical Safety Checklist (SSC among surgeons and anaesthetists working in Swiss hospitals and clinics and their perceptions of the SSC. METHODS: Cross-sectional survey at the 97th Annual Meeting of the Swiss Society of Surgery, Switzerland, 2010. Opinions of the SSC were assessed with a 6-item questionnaire. RESULTS: 152 respondents answered the questionnaire (participation rate 35.1%. 64.7% respondents acknowledged having a checklist in their hospital or their clinic. Median implementation year was 2009. More than 8 out of 10 respondents reported their team applied the Sign In and the Time Out very often or quasi systematically, whereas almost half of respondents acknowledged the Sign Out was applied never or rarely. The majority of respondents agreed that the checklist improves safety and team communication, and helps to develop a safety culture. However, they were less supportive about the opinion that the checklist facilitates teamwork and eliminates social hierarchy between caregivers. CONCLUSIONS: This survey indicates that the SSC has been largely implemented in many Swiss hospitals and clinics. Both surgeons and anaesthetists perceived the SSC as a valuable tool in improving intraoperative patient safety and communication among health care professionals, with lesser importance in facilitating teamwork (and eliminating hierarchical categories.

Patient satisfaction between primary care providers and hospitals: a cross-sectional survey in Jilin province, China.

Science.gov (United States)

Li, Jinghua; Wang, Pingping; Kong, Xuan; Liang, Hailun; Zhang, Xiumin; Shi, Leiyu

2016-06-01

To assess patient satisfaction with outpatient and inpatient care between primary care providers and secondary/tertiary hospitals, and to examine its association with socio-demographic characteristics and type of institution, based on self-reported survey data. Cross-sectional survey. Healthcare facilities within Jilin province, China. In total, 993 outpatients and 925 inpatients aged ≥15 years old were recruited. Patient satisfaction with the care experience. Patient satisfaction with outpatient and inpatient care was significantly associated with type of healthcare delivery setting in Jilin, China. Seeking outpatient care from community health centers (CHCs) was significantly associated with a higher ratio of patient satisfaction. Patients of county and tertiary hospitals complained about long-waiting times, bad attitudes of health workers, high expense of treatment, and their overall satisfaction towards outpatient care was lower. In the terms of inpatient care, patients were more satisfied with treatment expense in CHCs compared with county hospitals. CHCs and hospitals face different challenges regarding patient satisfaction. Further healthcare reform in China need to adopt more measures (e.g. increasing quality of primary care, setting up a referral medical system etc.) to improve patient satisfaction. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

From Learning to Decision-Making: A Cross-Sectional Survey of a Clinical Pharmacist-Steered Journal Club

Directory of Open Access Journals (Sweden)

Sherine Ismail

2017-01-01

Full Text Available Journal clubs have been traditionally incorporated into academic training programs to enhance competency in the interpretation of literature. We designed a structured journal club (JC to improve skills in the interpretation of literature; however, we were not aware of how learners (interns, residents, clinical pharmacists, etc. would perceive it. We aimed to assess the perception of learners at different levels of pharmacy training. A cross-sectional design was used. A self-administered online survey was emailed to JC attendees from 2010–2014 at King Abdulaziz Medical City, Jeddah, Saudi Arabia. The survey questions included: introduction sessions, topic selection, JC layout, interaction with the moderator, and decision-making skills by clinical pharmacists. The response rate was 58/89 (65%; 52/54 (96% respondents believed that JC adds to their knowledge in interpreting literature. Topic selection met the core curriculum requirements for credentials exams for 16/36 (44.4%, while 16/22 (73% presenters had good to excellent interaction with the moderator. JC facilitated decision-making for 10/12 (83% of clinical pharmacists. The results suggest that clinical pharmacist-steered JC may serve as an effective tool to empower learners at different levels of pharmacy practice, with evidence-based principles for interpretation of literature and guide informed decision-making.

Attitudes towards mental illness in Malawi: a cross-sectional survey

Directory of Open Access Journals (Sweden)

Crabb Jim

2012-07-01

Full Text Available Abstract Background Stigma and discrimination associated with mental illness are strongly linked to suffering, disability and poverty. In order to protect the rights of those with mental disorders and to sensitively develop services, it is vital to gain a more accurate understanding of the frequency and nature of stigma against people with mental illness. Little research about this issue has been conducted in Sub- Saharan Africa. Our study aimed to describe levels of stigma in Malawi. Methods A cross-sectional survey of patients and carers attending mental health and non-mental health related clinics in a general hospital in Blantyre, Malawi. Participants were interviewed using an adapted version of the questionnaire developed for the “World Psychiatric Association Program to Reduce Stigma and Discrimination Because of Schizophrenia”. Results 210 participants participated in our study. Most attributed mental disorder to alcohol and illicit drug abuse (95.7%. This was closely followed by brain disease (92.8%, spirit possession (82.8% and psychological trauma (76.1%. There were some associations found between demographic variables and single question responses, however no consistent trends were observed in stigmatising beliefs. These results should be interpreted with caution and in the context of existing research. Contrary to the international literature, having direct personal experience of mental illness seemed to have no positive effect on stigmatising beliefs in our sample. Conclusions Our study contributes to an emerging picture that individuals in Sub-Saharan Africa most commonly attribute mental illness to alcohol/ illicit drug use and spirit possession. Our work adds weight to the argument that stigma towards mental illness is an important global health and human rights issue.

Transfusion practice in anemic, non-bleeding patients: Cross-sectional survey of physicians working in general internal medicine teaching hospitals in Switzerland.

Science.gov (United States)

von Babo, Michelle; Chmiel, Corinne; Müggler, Simon Andreas; Rakusa, Julia; Schuppli, Caroline; Meier, Philipp; Fischler, Manuel; Urner, Martin

2018-01-01

Transfusion practice might significantly influence patient morbidity and mortality. Between European countries, transfusion practice of red blood cells (RBC) greatly differs. Only sparse data are available on transfusion practice of general internal medicine physicians in Switzerland. In this cross-sectional survey, physicians working in general medicine teaching hospitals in Switzerland were investigated regarding their self-reported transfusion practice in anemic patients without acute bleeding. The definition of anemia, transfusion triggers, knowledge on RBC transfusion, and implementation of guidelines were assessed. 560 physicians of 71 hospitals (64%) responded to the survey. Anemia was defined at very diverging hemoglobin values (by 38% at a hemoglobin Switzerland. Identifying and subsequently correcting this deficit in knowledge translation may have a significant impact on patient care.

Teaching Engineering Students Team Work

Science.gov (United States)

Levi, Daniel

1998-01-01

The purpose of this manual is to provide professor's in engineering classes which the background necessary to use student team projects effectively. This manual describes some of the characteristics of student teams and how to use them in class. It provides a set of class activities and films which can be used to introduce and support student teams. Finally, a set of teaching modules used in freshmen, sophomore, and senior aeronautical engineering classes are presented. This manual was developed as part of a NASA sponsored project to improve the undergraduate education of aeronautical engineers. The project has helped to purchase a set of team work films which can be checked out from Cal Poly's Learning Resources Center in the Kennedy Library. Research for this project has included literature reviews on team work and cooperative learning; interviews, observations, and surveys of Cal Poly students from Industrial and Manufacturing Engineering, Aeronautical Engineering and Psychology; participation in the Aeronautical Engineering senior design lab; and interviews with engineering faculty. In addition to this faculty manual, there is a student team work manual which has been designed to help engineering students work better in teams.

Linking young men who have sex with men (YMSM) to STI physicians: a nationwide cross-sectional survey in China.

Science.gov (United States)

Cao, Bolin; Zhao, Peipei; Bien, Cedric; Pan, Stephen; Tang, Weiming; Watson, Julia; Mi, Guodong; Ding, Yi; Luo, Zhenzhou; Tucker, Joseph D

2018-05-18

Many young men who have sex with men (YMSM) are reluctant to seek health services and trust local physicians. Online information seeking may encourage YMSM to identify and see trustworthy physicians, obtain sexual health services, and obtain testing for sexually transmitted infections (STIs). This study examined online STI information seeking behaviors among Chinese YMSM and its association with offline physician visits. We conducted a nationwide online survey among YMSM through WeChat, the largest social media platform in China. We collected information on individual demographics, sexual behaviors, online STI information seeking, offline STI testing, and STI physician visits. We examined the most commonly used platforms (search engines, governmental websites, counseling websites, generic social media, gay mobile apps, and mobile medical apps) and their trustworthiness. We assessed interest and willingness to use an MSM-friendly physician finder function embedded within a gay mobile app. Logistic regression models were used to examine the correlation between online STI information searching and offline physician visits. A total of 503 men completed the survey. Most men (425/503, 84.5%) searched for STI information online. The most commonly used platform to obtain STI information were search engines (402/425, 94.5%), followed by gay mobile apps (201/425, 47.3%). Men reported high trustworthiness of information received from gay mobile apps. Men also reported high interest (465/503, 92.4%) and willingness (463/503, 92.0%) to use a MSM-friendly physician finder function within such apps. Both using general social media (aOR =1.14, 95%CI: 1.04-1.26) and mobile medical apps (aOR =1.16, 95%CI: 1.01-1.34) for online information seeking were associated with visiting a physician. Online STI information seeking is common and correlated with visiting a physician among YMSM. Cultivating partnerships with the emerging mobile medical apps may be useful for disseminating STI

Construction of In-core Structure Test Section in HENDEL, (1)

International Nuclear Information System (INIS)

Kunitomi, Kazuhiko; Inagaki, Yoshiyuki; Ioka, Ikuo; Kondoh, Yasuo; Nekoya, Shinichi; Miyamoto, Yoshiaki; Akisada, Toshihiro; Yamaguchi, Shigeru.

1988-01-01

An In-core Structure Test Section (T 2 ) in Helium Engineering Demonstration Loop (HENDEL) simulates a part of the core bottom structure with the same scale as that of a high temperature engineering test reactor (HTTR) designed in Japan Atomic Energy Research Institute. The design and construction of T 2 test section were started in March 1983, and completed in June 1986. The main objectives of the T 2 test section are to verify thermal-hydraulic performance and integrity of the core bottom structure. The report describes the general outline of T 2 test section, and experience gained from construction and preliminary test with regard to the simulated core bottom structure. (author)

Workplace violence against physicians in Turkey's emergency departments: a cross-sectional survey.

Science.gov (United States)

Bayram, Başak; Çetin, Murat; Çolak Oray, Neşe; Can, İsmail Özgür

2017-06-29

We aimed to determine the prevalence of violence directed at emergency department (ED) physicians in Turkey and confirm the factors influencing such violence. Cross-sectional survey study. Country of Turkey. Physicians currently practising in EDs in Turkey. The prevalence of violence directed at physicians and factors that may influence it, such as physicians' personal characteristics, ED characteristics and physicians' opinions regarding the causes of and suggested methods of preventing violence. A total of 713 physicians participated. Of these, 78.1% reported being subjected to violence in the past year and 65.9% reported more than one such incident. Being subjected to violence was related to age (p=0.008), working in an ED with a high patient admission rate (p=0.018), current position (pviolence. The present safety precautions against violence do not appear to influence the prevalence of violence. Our results indicated that ED physicians' experience of violence is related to personal characteristics such as age and level of expertise, and hospital and ED characteristics such as high patient admission rates. Presently, no measures taken to reduce this violence have been proven effective. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Cross-sectional survey of patients' need for information and support with medicines after discharge from hospital.

Science.gov (United States)

Mackridge, Adam J; Rodgers, Ruth; Lee, Dan; Morecroft, Charles W; Krska, Janet

2017-11-20

Most patients experience changes to prescribed medicines during a hospital stay. Ensuring they understand such changes is important for preventing adverse events post-discharge and optimising patient understanding. However, little work has explored the information that patients receive about medicines or their perceived needs for information and support after discharge. To determine information that hospital inpatients who experience medicine changes receive about their medicines during admission and their needs and preferences for, and use of, post-discharge support. Cross-sectional survey with adult medical inpatients experiencing medicine changes in six English hospitals, with telephone follow-up 2-3 weeks post-discharge. A total of 444 inpatients completed surveys, and 99 of these were followed up post-discharge. Of the 444, 44 (10%) were unaware of changes to medicines and 65 (16%) did not recall discussing them with a health professional, but 305 (77%) reported understanding the changes. Type of information provided and patients' perceived need for post-discharge support differed between hospitals. Information about changes was most frequently provided by consultant medical staff (157; 39%) with pharmacists providing information least often (71; 17%). One third of patients surveyed considered community pharmacists as potential sources of information about medicines and associated support post-discharge. Post-discharge, just 5% had spoken to a pharmacist, although 35% reported medicine-related problems. In north-west England, patient inclusion in treatment decisions could be improved, but provision of information prior to discharge is reasonable. There is scope to develop hospital and community pharmacists' role in medicine optimisation to maximise safety and effectiveness of care. © 2017 Royal Pharmaceutical Society.

Behavior of Engineering Students in Kuwait University

OpenAIRE

M. A. Al-Ajmi; R. S. Al-Kandari

2015-01-01

This initial study is concerned with the behavior of engineering students in Kuwait University which became a concern due to the global issues of education in all levels. A survey has been conducted to identify academic and societal issues affecting the engineering student performance. The study is drawing major conclusions with regard to private tutoring and the online availability of textbooks’ solution manuals.

Using decision pathway surveys to inform climate engineering policy choices.

Science.gov (United States)

Gregory, Robin; Satterfield, Terre; Hasell, Ariel

2016-01-19

Over the coming decades citizens living in North America and Europe will be asked about a variety of new technological and behavioral initiatives intended to mitigate the worst impacts of climate change. A common approach to public input has been surveys whereby respondents' attitudes about climate change are explained by individuals' demographic background, values, and beliefs. In parallel, recent deliberative research seeks to more fully address the complex value tradeoffs linked to novel technologies and difficult ethical questions that characterize leading climate mitigation alternatives. New methods such as decision pathway surveys may offer important insights for policy makers by capturing much of the depth and reasoning of small-group deliberations while meeting standard survey goals including large-sample stakeholder engagement. Pathway surveys also can help participants to deepen their factual knowledge base and arrive at a more complete understanding of their own values as they apply to proposed policy alternatives. The pathway results indicate more fully the conditional and context-specific nature of support for several "upstream" climate interventions, including solar radiation management techniques and carbon dioxide removal technologies.

Eating patterns of Turkish adolescents: a cross-sectional survey

Directory of Open Access Journals (Sweden)

Hayran Osman

2010-12-01

Full Text Available Abstract Background Adolescence is a crucial period for development of dietary behaviors that continue into adulthood and influence the risk of chronic diseases later in life. The aim of this study was to determine the eating patterns of adolescents' and their compliance with the Food Guide Pyramid. Methods 625 students, aged between 11-15 years, from an elementary school in Istanbul, Turkey were enrolled in this cross-sectional survey. A questionnaire of eating patterns (QEP was administered to all participants. QEP is consisted of questions assessing the knowledge and behaviors on healthy eating, factors affecting food choice, physical activity status and demographical variables. Height and weight of all participants were measured. Physical activity status was determined by questioning about participation in regular sport activities, how much time spent watching TV, playing computer games or doing homework. Results The mean age of the participants was 12.15 ± 1.15 and 50.5% were female. According to body mass index (BMI percentiles, 8.3% (52 were obese and 10.2% were overweight. 51% had breakfast every day and only 1.9% met all the recommendations of the Food Guide Pyramid. Among the participants, 31% have fast food at least once every day and 60.8% skip meals. When participants were asked to rate the factors effecting their food choice according to a 10 point Likert scale, the highest mean scores (high impact on food choice were for the factors; family, health, body perception, teachers and friends; 7.5 ± 3.1, 7.4 ± 3.1, 6.1 ± 3.2, 4.8 ± 3.3 and 4.2 ± 3.0 respectively. Total mean time spent on all passive activities (TV, computer, reading homework etc per day was 9.8 ± 4.7 hours. Conclusions In this study we have demonstrated that, adolescents do not have healthy eating patterns. Educational interventions should be planned to decrease the health risks attributable to their eating behaviors.

Eating patterns of Turkish adolescents: a cross-sectional survey.

Science.gov (United States)

Akman, Mehmet; Akan, Hülya; Izbirak, Güldal; Tanriöver, Özlem; Tilev, Sırma Mine; Yildiz, Anil; Tektaş, Simge; Vitrinel, Ayça; Hayran, Osman

2010-12-19

Adolescence is a crucial period for development of dietary behaviors that continue into adulthood and influence the risk of chronic diseases later in life. The aim of this study was to determine the eating patterns of adolescents' and their compliance with the Food Guide Pyramid. 625 students, aged between 11-15 years, from an elementary school in Istanbul, Turkey were enrolled in this cross-sectional survey. A questionnaire of eating patterns (QEP) was administered to all participants. QEP is consisted of questions assessing the knowledge and behaviors on healthy eating, factors affecting food choice, physical activity status and demographical variables. Height and weight of all participants were measured. Physical activity status was determined by questioning about participation in regular sport activities, how much time spent watching TV, playing computer games or doing homework. The mean age of the participants was 12.15 ± 1.15 and 50.5% were female. According to body mass index (BMI) percentiles, 8.3% (52) were obese and 10.2% were overweight. 51% had breakfast every day and only 1.9% met all the recommendations of the Food Guide Pyramid. Among the participants, 31% have fast food at least once every day and 60.8% skip meals. When participants were asked to rate the factors effecting their food choice according to a 10 point Likert scale, the highest mean scores (high impact on food choice) were for the factors; family, health, body perception, teachers and friends; 7.5 ± 3.1, 7.4 ± 3.1, 6.1 ± 3.2, 4.8 ± 3.3 and 4.2 ± 3.0 respectively. Total mean time spent on all passive activities (TV, computer, reading homework etc) per day was 9.8 ± 4.7 hours. In this study we have demonstrated that, adolescents do not have healthy eating patterns. Educational interventions should be planned to decrease the health risks attributable to their eating behaviors.

A nuclear power plant system engineering workstation

International Nuclear Information System (INIS)

Mason, J.H.; Crosby, J.W.

1989-01-01

System engineers offer an approach for effective technical support for operation and maintenance of nuclear power plants. System engineer groups are being set up by most utilities in the United States. Institute of Nuclear Power operations (INPO) and U.S. Nuclear Regulatory Commission (NRC) have endorsed the concept. The INPO Good Practice and a survey of system engineer programs in the southeastern United States provide descriptions of system engineering programs. The purpose of this paper is to describe a process for developing a design for a department-level information network of workstations for system engineering groups. The process includes the following: (1) application of a formal information engineering methodology, (2) analysis of system engineer functions and activities; (3) use of Electric Power Research Institute (EPRI) Plant Information Network (PIN) data; (4) application of the Information Engineering Workbench. The resulting design for this system engineer workstation can provide a reference for design of plant-specific systems

Geological survey by high resolution electrical survey on granite areas

International Nuclear Information System (INIS)

Sugimoto, Yoshihiro; Yamada, Naoyuki

2002-03-01

As an Integral part of the geological survey in 'The study of the regions ground water flow system' that we are carrying out with Tono Geoscience Center, we proved the relation between the uncontinuation structure such as lineament in the base rock and resistivity structure (resistivity distribution), for the purpose of that confirms the efficacy of the high resolution electrical survey as geological survey, we carried out high resolution electrical survey on granite area. We obtained the following result, by the comparison of resistivity distribution with established geological survey, lineament analysis and investigative drilling. 1. The resistivity structure of this survey area is almost able to classify it into the following four range. 1) the low resistivity range of 50-800 Ωm, 2) The resistivity range like the middle of 200-2000 Ωm, 3) The high resistivity range of 2000 Ωm over, 4) The low resistivity range of depth of the survey line 400-550 section. 2. The low resistivity range of 4) that correspond with the established geological data is not admitted. 3. It was confirmed that resistivity structure almost correspond to geological structure by the comparison with the established data. 4. The small-scale low resistivity area is admitted in the point equivalent to the lineament position of established. 5. We carried out it with the simulation method about the low resistivity range of 4). As a result, it understood that it has the possibility that the narrow ratio low resistivity area is shown as the wide ratio resistivity range in the analysis section. In the survey in this time, it is conceivable that the resistivity distribution with the possibility of the unhomogeneous and uncontinuation structure of the base rock is being shown conspicuously, the efficacy of the high resolution resistivity survey as geological survey on granite was shown. (author)

48 CFR 2936.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 2936.602 Section 2936.602 Federal Acquisition Regulations System DEPARTMENT OF LABOR GENERAL CONTRACTING REQUIREMENTS CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 2936.602 Selection of firms for architect-engineer contracts. ...

Codeine use, dependence and help-seeking behaviour in the UK and Ireland: an online cross-sectional survey.

Science.gov (United States)

Kimergård, A; Foley, M; Davey, Z; Dunne, J; Drummond, C; Deluca, P

2017-09-01

Codeine misuse and dependence poses a clinical and public health challenge. However, little is known about dependence and treatment needs in the UK and Ireland. To characterize codeine use, dependence and help-seeking behaviour. An online cross-sectional survey advertised on Facebook, Twitter, health and drug websites and e-mail circulars. The survey collected data on demographics and codeine use amongst adults from the UK and Ireland. The Severity of Dependence Scale measured the level of codeine dependence. The sample of 316 respondents had a mean age of 35.3 years (SD = 12.3) and 67% were women. Of the 316 respondents, 54 scored ≥5 on the Severity of Dependence Scale indicating codeine dependence (17.1%). Our study found that codeine dependence is a problem with both prescribed and 'over-the-counter' codeine. Codeine dependence was associated with daily use of codeine, faking or exaggerating symptoms to get a prescription for codeine and 'pharmacy shopping' ( P addiction treatment demand through increased identification and referrals in primary care. © The Author 2017. Published by Oxford University Press on behalf of the Association of Physicians. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Guide to advanced empirical software engineering

National Research Council Canada - National Science Library

Shull, Forrest; Singer, Janice; Sjøberg, Dag I. K

2008-01-01

... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Section I Research Methods and Techniques Chapter 1 Software Engineering Data Collection for Field Studies...

Public Opinion Survey - Energy, The Present and The Future, 2015

International Nuclear Information System (INIS)

Trontl, K.; Pevec, D.; Matijevic, M.; Jecmenica, R.; Duckic, P.; Lebegner, J.

2016-01-01

During the year 2015 the Department of Applied Physics of the Faculty of Electrical Engineering and Computing, University of Zagreb conducted a public opinion survey entitled 'Energy - The Present and the Future' among student population of 1115 individuals. The tested population consisted of the University of Zagreb six faculties' students: the Faculty of Electrical Engineering and Computing, the Faculty of Food Technology and Biotechnology, the Faculty of Chemical Engineering and Technology, the Faculty of Mining, Geology and Petroleum Engineering, the Faculty of Science, and the Faculty of Humanities and Social Sciences. The questions in the survey covered several different energy issues, including the present and the future energy resources, the acceptability of different fuel type power plants, the environmental protection and global warming, the radioactivity, the radioactive waste issues, reliable information sources, and position of participants towards climate change issues, as well as European Union and Croatian goals set for the year 2020. The basic results of survey analysis for nuclear oriented questions, as well as the comparison of results of the current survey with the results of the similar surveys conducted in the academic years 2007/08, and 2012/2013, are reported in this paper. Participants generally express high level of formal environmental awareness. However, their choices and attitudes are in a contradiction to claimed eco-orientation, as well as to the scientific facts. The discrepancies are particularly noticeable in parts of the survey dealing with the nuclear energy and the nuclear power plants. The participants are also demonstrating lack of knowledge on nuclear issues especially regarding radioactive waste management, as well as economics and operational safety of nuclear power plants. (author).

Global Journal of Engineering Research: Editorial Policies

African Journals Online (AJOL)

Focus and Scope. The Global Journal of Engineering Research is aimed at promoting research in all areas of Engineering Research including Mechanical, Civil, Electrical, Chemical, Electronics, Geological etc. Section Policies. Articles. Checked Open Submissions, Checked Indexed, Checked Peer Reviewed. Publication ...

Kempe's engineers year-book for 1977. Volume II

Energy Technology Data Exchange (ETDEWEB)

Prockter, C.E. (ed.)

1977-01-01

The second volume of this two-volume yearbook contains data on: electrical and electronic engineering; aerodynamics and aircraft propulsion; gas turbines; internal combustion engines; motor vehicles; fuels; fluidics; nuclear energy; gas and gas engineering; steam engineering and steam turbines; marine diesel engines; naval architecture; mining engineering; industrial explosives; air compression, pneumatic equipment, etc.; refrigeration, heating, ventilation and air conditioning; lighting; industrial safety and protection; fire protection; highway engineering; surveying; foundation and earthwork; cements, mortars and clay products; buildings; public health engineering; concretes; design of steel structures; bridges and bridgework; paints and coatings; patents, designs and trade marks; depreciation; legal notes for engineers; factory planning and layout; and agricultural engineering. (1325p.) A subject index is provided. (LCL)

48 CFR 536.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 536.602 Section 536.602 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 536.602 Selection of firms for architect-engineer contracts. ...

48 CFR 1336.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 1336.602 Section 1336.602 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1336.602 Selection of firms for architect-engineer contracts. ...

48 CFR 636.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 636.602 Section 636.602 Federal Acquisition Regulations System DEPARTMENT OF STATE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 636.602 Selection of firms for architect-engineer contracts. ...

48 CFR 436.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 436.602 Section 436.602 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Service 436.602 Selection of firms for architect-engineer contracts. ...

48 CFR 1536.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 1536.602 Section 1536.602 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1536.602 Selection of firms for architect-engineer contracts. ...

48 CFR 36.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 36.602 Section 36.602 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.602 Selection of firms for architect-engineer contracts. ...

The Role of Computer Networks in Aerospace Engineering.

Science.gov (United States)

Bishop, Ann Peterson

1994-01-01

Presents selected results from an empirical investigation into the use of computer networks in aerospace engineering based on data from a national mail survey. The need for user-based studies of electronic networking is discussed, and a copy of the questionnaire used in the survey is appended. (Contains 46 references.) (LRW)

Final Technical Report; NUCLEAR ENGINEERING RECRUITMENT EFFORT

Energy Technology Data Exchange (ETDEWEB)

Kerrick, Sharon S.; Vincent, Charles D.

2007-07-02

This report provides the summary of a project whose purpose was to support the costs of developing a nuclear engineering awareness program, an instruction program for teachers to integrate lessons on nuclear science and technology into their existing curricula, and web sites for the exchange of nuclear engineering career information and classroom materials. The specific objectives of the program were as follows: OBJECTIVE 1: INCREASE AWARENESS AND INTEREST OF NUCLEAR ENGINEERING; OBJECTIVE 2: INSTRUCT TEACHERS ON NUCLEAR TOPICS; OBJECTIVE 3: NUCLEAR EDUCATION PROGRAMS WEB-SITE; OBJECTIVE 4: SUPPORT TO UNIVERSITY/INDUSTRY MATCHING GRANTS AND REACTOR SHARING; OBJECTIVE 5: PILOT PROJECT; OBJECTIVE 6: NUCLEAR ENGINEERING ENROLLMENT SURVEY AT UNIVERSITIES

Vibration survey of internal combustion engines for use on unmanned air vehicles

International Nuclear Information System (INIS)

Duanis, B.

1998-01-01

This paper describes the method, the procedure and data results of engine vibration test which is carried out on engines for use on unmanned air vehicles. The paper focuses on the testing of rotating propulsion systems powered by an internal combustion engine which is composed of main rotating components such as the alternator, gearbox, propeller , dampers and couplings. Three measurement methods for measuring torsional and lateral vibrations are presented: a. Gear tooth pulse signal. b. Shaft Strain Gage. c. Laser Displacement Sensors The paper also presents data from tests which were performed using each method and discusses the applications, the advantages and disadvantages of each method

Report on a survey in fiscal 1999. Survey on energy use evaluation systems; 1999 nendo energy shiyo hyoka system chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The present survey and study relate to the medium to long term policies for technological development of energy and environment related technologies, and are intended to develop a system that can evaluate the importance, feasibility, expected realization time, and expected cost of the technologies, including their synergetic effects. The survey and study are intended to provide clear guidelines for planning the technological development policies on which of the technological development should be promoted in what ways, based on the evaluation given by the use of the system. The report describes in Section 1 to adopt two types of approaches of a 'technology map' and a 'network chart evaluation system' to achieve the goal. Section 2, after describing the results of surveys on the past study cases of technology evaluation, describes that the present approach has new features that are different from conventional ones. Section 3 states the results of surveys on the basic technologies to prevent global warming, and shows cases of preparing maps that notice on energy flows. Section 4 relates to network chart evaluating methods. Section 5 describes the results of surveys that have been made in relation with chronological progress of the technological development, in preparation for surveys to be made in the coming fiscal years. (NEDO)

Detection and management of depression in adult primary care patients in Hong Kong: a cross-sectional survey conducted by a primary care practice-based research network

OpenAIRE

Chan, KTY; Wong, SYS; Chiu, BCF; Chin, WY; Lam, TP; Lam, CLK; Fong, DYT; Lo, YCY

2014-01-01

Background This study aimed to examine the prevalence, risk factors, detection rates and management of primary care depression in Hong Kong. Methods A cross-sectional survey containing the PHQ-9 instrument was conducted on waiting room patients of 59 primary care doctors. Doctors blinded to the PHQ-9 scores reported whether they thought their patients had depression and their management. Results 10,179 patients completed the survey (response rate 81%). The prevalence of PHQ-9 positive screeni...

Public Opinion Survey - Energy - The Present and the Future - 2009/10

International Nuclear Information System (INIS)

Trontl, K.; Jecmenica, R.; Pevec, D.

2010-01-01

During the academic year 2009/10 the Department of Applied Physics of the Faculty of Electrical Engineering and Computing conducted a public opinion survey entitled 'Energy - The Present and the Future' among student population of 622 individuals age 18-20 (413 male students, 202 female students, and 7 students without the answer on gender question). The tested population consisted of the University of Zagreb four faculties' students: the Faculty of Electrical Engineering and Computing, the Faculty of Food Technology and Biotechnology, the Faculty of Chemical Engineering and Technology, the Faculty of Civil Engineering. The questions in the survey covered several different energy issues, including the present and the future energy resources, the acceptability of different fuel type power plants, the environmental protection and global warming, the radioactivity, the waste issues, as well as reliable information sources. The basic results of survey analysis for nuclear oriented questions, as well as the comparison of results of the current survey with the results of the similar survey conducted in the academic year 2007/08, are reported in this paper. Participants generally express high level of formal environmental awareness. However, their choices and attitudes are in a contradiction to claimed eco-orientation, as well as to the scientific facts. The discrepancies are particularly noticeable in parts of the survey dealing with the nuclear energy and the nuclear power plants. The participants are also demonstrating lack of knowledge on nuclear issues especially regarding radioactive waste management, as well as economics and operational safety of nuclear power plants.(author).

48 CFR 1436.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 1436.602 Section 1436.602 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1436.602 Selection of firms for architect-engineer contracts. ...

48 CFR 836.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 836.602 Section 836.602 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 836.602 Selection of firms for architect-engineer contracts. ...

[Master course in biomedical engineering].

Science.gov (United States)

Jobbágy, Akos; Benyó, Zoltán; Monos, Emil

2009-11-22

The Bologna Declaration aims at harmonizing the European higher education structure. In accordance with the Declaration, biomedical engineering will be offered as a master (MSc) course also in Hungary, from year 2009. Since 1995 biomedical engineering course has been held in cooperation of three universities: Semmelweis University, Budapest Veterinary University, and Budapest University of Technology and Economics. One of the latter's faculties, Faculty of Electrical Engineering and Informatics, has been responsible for the course. Students could start their biomedical engineering studies - usually in parallel with their first degree course - after they collected at least 180 ECTS credits. Consequently, the biomedical engineering course could have been considered as a master course even before the Bologna Declaration. Students had to collect 130 ECTS credits during the six-semester course. This is equivalent to four-semester full-time studies, because during the first three semesters the curriculum required to gain only one third of the usual ECTS credits. The paper gives a survey on the new biomedical engineering master course, briefly summing up also the subjects in the curriculum.

Software Engineering Research/Developer Collaborations in 2004 (C104)

Science.gov (United States)

Pressburger, Tom; Markosian, Lawrance

2005-01-01

In 2004, six collaborations between software engineering technology providers and NASA software development personnel deployed a total of five software engineering technologies (for references, see Section 7.2) on the NASA projects. The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report (for references, see Section 7.1). Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Section 6 lists the acronyms used in this report.

An algorithm to assess methodological quality of nutrition and mortality cross-sectional surveys: development and application to surveys conducted in Darfur, Sudan.

Science.gov (United States)

Prudhon, Claudine; de Radiguès, Xavier; Dale, Nancy; Checchi, Francesco

2011-11-09

Nutrition and mortality surveys are the main tools whereby evidence on the health status of populations affected by disasters and armed conflict is quantified and monitored over time. Several reviews have consistently revealed a lack of rigor in many surveys. We describe an algorithm for analyzing nutritional and mortality survey reports to identify a comprehensive range of errors that may result in sampling, response, or measurement biases and score quality. We apply the algorithm to surveys conducted in Darfur, Sudan. We developed an algorithm based on internationally agreed upon methods and best practices. Penalties are attributed for a list of errors, and an overall score is built from the summation of penalties accrued by the survey as a whole. To test the algorithm reproducibility, it was independently applied by three raters on 30 randomly selected survey reports. The algorithm was further applied to more than 100 surveys conducted in Darfur, Sudan. The Intra Class Correlation coefficient was 0.79 for mortality surveys and 0.78 for nutrition surveys. The overall median quality score and range of about 100 surveys conducted in Darfur were 0.60 (0.12-0.93) and 0.675 (0.23-0.86) for mortality and nutrition surveys, respectively. They varied between the organizations conducting the surveys, with no major trend over time. Our study suggests that it is possible to systematically assess quality of surveys and reveals considerable problems with the quality of nutritional and particularly mortality surveys conducted in the Darfur crisis.

Software Engineering Improvement Plan

Science.gov (United States)

2006-01-01

In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

Knowledge and attitudes toward vaccination: A survey of Serbian students.

Science.gov (United States)

Cvjetkovic, Smiljana J; Jeremic, Vida Lj; Tiosavljevic, Danijela V

Since vaccination coverage in Serbia has been decreasing and health professionals have been identified as the most important factor in making decisions about immunization, vaccination knowledge and attitudes of students, especially medical students, are of particular interest. A cross-sectional survey was carried out on three groups of 509 Belgrade University students (medical, law and engineering students). The data were collected using an on-line questionnaire posted to student groups and included the Vaccine Knowledge Questionnaire and Attitudes Toward Vaccination Scale. This survey also included questions about demographic characteristics and perceived negative experiences. Multiple linear regression analysis was performed. There was a significant difference in the Vaccine Knowledge score (F=40.48, pstudents. Medical students (N=251, Mean=4.47, SD=1.71) had significantly higher mean knowledge scores than did law (N=128, Mean=2.80, SD=1.56) or engineering students (N=130, Mean=3.98, SD=1.81). Compared with the law (Mean=49.77, SD=10.23) and engineering students (Mean=57.62, SD=12.21), medical students (Mean=59.52, SD=9.62) also had significantly higher attitude scores (F=37.56, pstudents toward immunization. However, some knowledge gaps were identified. Multivariate analysis showed that those who had better vaccine knowledge, those who studies medicine, those who attended at university for more years, and those who do not know someone who had a negative experience with vaccines were more likely to have positive attitudes toward vaccination. Considering the growing vaccination hesitance in the general population, this is an important result that indicates that medical students are possible important participants in future public health campaigns. A strong association between vaccine knowledge and attitudes implies recommendations to introduce a specialized vaccination curriculum at both the undergraduate and graduate levels of medical study. Copyright © 2017 The

A survey of tests for protection against non-ductile failure

International Nuclear Information System (INIS)

Girotra, C.C.

1975-01-01

A study of the various tests available to test susceptibility to brittle fracture - their advantages, limitations has been made and the present status of data available to engineers has been surveyed. Due to the limitations of the charpy V-notch impact testing method - LEFM based Ksub(Ic) test and GYFM based COD test have been receiving recognition. ASME Section III has recently recommended Ksub(Ic) test as an alternative test for the selection of (ferritic) materials for class 1 pressure vessels. COD test proposed by British research workers, however, is yet to gain recognition for pressure vessel code particles, although it has existed as a tentative specification for more than 2 years and is more relevant to the materials with average strength. (author)

29 CFR 1926.758 - Systems-engineered metal buildings.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Systems-engineered metal buildings. 1926.758 Section 1926... Systems-engineered metal buildings. (a) All of the requirements of this subpart apply to the erection of systems-engineered metal buildings except §§ 1926.755 (column anchorage) and 1926.757 (open web steel...

An Academic Survey of Engineering Student Athletes at a Division I University

Science.gov (United States)

Pierce, Charles E.

2007-01-01

This paper explores the academic success of NCAA Division I collegiate student athletes that enroll in engineering majors. At the University of South Carolina, which is a member of the NCAA Division I Southeastern Conference, nineteen engineering students were on an active athletic roster during the spring semester of 2005. The mean cumulative…

Engaging Community College Students Using an Engineering Learning Community

Science.gov (United States)

Maccariella, James, Jr.

The study investigated whether community college engineering student success was tied to a learning community. Three separate data collection sources were utilized: surveys, interviews, and existing student records. Mann-Whitney tests were used to assess survey data, independent t-tests were used to examine pre-test data, and independent t-tests, analyses of covariance (ANCOVA), chi-square tests, and logistic regression were used to examine post-test data. The study found students that participated in the Engineering TLC program experienced a significant improvement in grade point values for one of the three post-test courses studied. In addition, the analysis revealed the odds of fall-to-spring retention were 5.02 times higher for students that participated in the Engineering TLC program, and the odds of graduating or transferring were 4.9 times higher for students that participated in the Engineering TLC program. However, when confounding variables were considered in the study (engineering major, age, Pell Grant participation, gender, ethnicity, and full-time/part-time status), the analyses revealed no significant relationship between participation in the Engineering TLC program and course success, fall-to-spring retention, and graduation/transfer. Thus, the confounding variables provided alternative explanations for results. The Engineering TLC program was also found to be effective in providing mentoring opportunities, engagement and motivation opportunities, improved self confidence, and a sense of community. It is believed the Engineering TLC program can serve as a model for other community college engineering programs, by striving to build a supportive environment, and provide guidance and encouragement throughout an engineering student's program of study.

48 CFR 1836.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 1836.602 Section 1836.602 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1836.602 Selection of firms for architect-engineer contracts. ...

Identifying Professional Competencies of the Flip-Chip Packaging Engineer in Taiwan

Science.gov (United States)

Guu, Y. H.; Lin, Kuen-Yi; Lee, Lung-Sheng

2014-01-01

This study employed a literature review, expert interviews, and a questionnaire survey to construct a set of two-tier competencies for a flip-chip packaging engineer. The fuzzy Delphi questionnaire was sent to 12 flip-chip engineering experts to identify professional competencies that a flip-chip packaging engineer must have. Four competencies,…

Diagnosis and management practices for gestational diabetes mellitus in Australia: Cross-sectional survey of the multidisciplinary team.

Science.gov (United States)

Meloncelli, Nina; Barnett, Adrian; Pelly, Fiona; de Jersey, Susan

2018-04-18

Gestational diabetes mellitus (GDM) is one of the most common pregnancy disorders; however, if well managed, women with GDM experience similar pregnancy outcomes to those without. Currently, there is limited evidence on actual management practices across Australia or how multidisciplinary teams interact to optimise care. To examine the current screening, diagnostic, task and role perceptions and management practices, as reported by members of the GDM multidisciplinary team. A 64-item electronic survey containing multiple choice, Likert scale and open-ended questions was developed for this cross-sectional observational study and advertised through health professional organisations and Queensland Health facilities in May and June, 2017. The 183 survey respondents included 45 diabetes educators, 43 dietitians, 21 endocrinologists/diabetes specialists, 14 obstetricians and 21 midwives. Although almost 90% reported using updated diagnostic guidelines, less than two-thirds used GDM management guidelines. While 68% reported using the same blood glucose targets for GDM management, there was variation to what criteria prompted the commencement of medication to control blood glucose levels. There was a good consensus concerning the health professional responsible for tasks such as medical nutrition therapy, gestational weight gain and self-blood glucose monitoring education and ultrasound use. Other tasks appeared to be the role of almost any member of the GDM multidisciplinary team. The survey results indicate there is a need for consistent evidence on how to best manage GDM and that role identity, access to specialist knowledge and best practice need to be clearly defined within GDM models of care. © 2018 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

Workplace violence against physicians in Turkey’s emergency departments: a cross-sectional survey

Science.gov (United States)

Bayram, Başak; Çetin, Murat; Çolak Oray, Neşe; Can, İsmail Özgür

2017-01-01

Objective We aimed to determine the prevalence of violence directed at emergency department (ED) physicians in Turkey and confirm the factors influencing such violence. Design Cross-sectional survey study. Setting Country of Turkey. Participants Physicians currently practising in EDs in Turkey. Main outcome measures The prevalence of violence directed at physicians and factors that may influence it, such as physicians’ personal characteristics, ED characteristics and physicians’ opinions regarding the causes of and suggested methods of preventing violence. Results A total of 713 physicians participated. Of these, 78.1% reported being subjected to violence in the past year and 65.9% reported more than one such incident. Being subjected to violence was related to age (p=0.008), working in an ED with a high patient admission rate (p=0.018), current position (pviolence. The present safety precautions against violence do not appear to influence the prevalence of violence. Conclusions Our results indicated that ED physicians’ experience of violence is related to personal characteristics such as age and level of expertise, and hospital and ED characteristics such as high patient admission rates. Presently, no measures taken to reduce this violence have been proven effective. PMID:28663323

Engineering issues of a 1000 S neutral beam ion source

International Nuclear Information System (INIS)

Jayakumar, P.K.; Jana, M.R.; Bisai, N.; Bajpai, M.; Singh, N.P.; Baruah, U.K.; Chakraborty, A.K.; Bandyopadhyay, M.; Chakrapani, C.; Patel, D.; Patel, G.B.; Patel, P.J.; Prahlad, V.; Rao, N.V.M.; Rotti, C.; Sreedhar, V.; Mattoo, S.K.

1998-01-01

This paper presents the engineering features incorporated in the mechanical and the electrical design of the ion source for 1000 S pulse length operation. The design has made extensive use of the finite element analysis code ANSYS, for simulating the thermal and electrical features. In this paper, erosion of the grids is discussed in Section II, the new engineering features of the back panel in Section III, the electric design of the stress shields in Section IV and a summary recommendation for the operational parameters in Section V. (author)

40 CFR 89.325 - Engine intake air temperature measurement.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine intake air temperature measurement. 89.325 Section 89.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Test Equipment Provisions § 89.325 Engine intake air temperature measurement. (a) Engine intake air...

An algorithm to assess methodological quality of nutrition and mortality cross-sectional surveys: development and application to surveys conducted in Darfur, Sudan

Directory of Open Access Journals (Sweden)

Prudhon Claudine

2011-11-01

Full Text Available Abstract Background Nutrition and mortality surveys are the main tools whereby evidence on the health status of populations affected by disasters and armed conflict is quantified and monitored over time. Several reviews have consistently revealed a lack of rigor in many surveys. We describe an algorithm for analyzing nutritional and mortality survey reports to identify a comprehensive range of errors that may result in sampling, response, or measurement biases and score quality. We apply the algorithm to surveys conducted in Darfur, Sudan. Methods We developed an algorithm based on internationally agreed upon methods and best practices. Penalties are attributed for a list of errors, and an overall score is built from the summation of penalties accrued by the survey as a whole. To test the algorithm reproducibility, it was independently applied by three raters on 30 randomly selected survey reports. The algorithm was further applied to more than 100 surveys conducted in Darfur, Sudan. Results The Intra Class Correlation coefficient was 0.79 for mortality surveys and 0.78 for nutrition surveys. The overall median quality score and range of about 100 surveys conducted in Darfur were 0.60 (0.12-0.93 and 0.675 (0.23-0.86 for mortality and nutrition surveys, respectively. They varied between the organizations conducting the surveys, with no major trend over time. Conclusion Our study suggests that it is possible to systematically assess quality of surveys and reveals considerable problems with the quality of nutritional and particularly mortality surveys conducted in the Darfur crisis.

Guest Editorial: The Professional Status of European Chemists and Chemical Engineers.

Science.gov (United States)

Salzer, Reiner; Taylor, Philip; Majcen, Nineta H; De Angelis, Francesco; Wilmet, Sophie; Varella, Evangelia; Kozaris, Ioannis

2015-07-06

Which country pays its chemists and chemical engineers the highest salaries? Where can I find a new job quickest? Which chemical sub-discipline offers most jobs? Reliable answers for these and other questions have been derived from the first European employment survey for chemists and chemical engineers, which was carried out in 2013. Here we publish the first general evaluation of the results of this survey. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Association of engineering geologists 32nd annual meeting

International Nuclear Information System (INIS)

Anon.

1989-01-01

This book contains the proceedings of the 32nd Annual Meeting of the Association of Engineering Geologists. Included are the following articles: Engineering geology---a tool in petroleum exploration ventures font, The soil headspace survey method as an indicator of soil and groundwater contamination by petroleum products, Determination of compressive strength of coal for pillar design hirt

The mental health of nurses in acute teaching hospital settings: a cross-sectional survey.

Science.gov (United States)

Perry, Lin; Lamont, Scott; Brunero, Scott; Gallagher, Robyn; Duffield, Christine

2015-01-01

Nursing is an emotionally demanding profession and deficiencies in nurses' mental wellbeing, characterised by low vitality and common mental disorders, have been linked to low productivity, absenteeism and presenteeism. Part of a larger study of nurses' health, the aim of this paper was to describe the mental health status and related characteristics of nurses working in two acute metropolitan teaching hospitals. A cross sectional survey design was used. The Registered and Enrolled Nurse workforce, employed on any form of contract, at two teaching hospitals in Sydney Australia were invited to participate. The survey tool was compiled of validated tools and questions. Family and medical history and health risk-related characteristics, current psycho-active medications, smoking status, alcohol intake, eating disorders, self-perceived general health, mental health and vitality, demographic, social and occupational details were collected. A total of 1215 surveys were distributed with a usable response rate of 382 (31.4%). Altogether 53 nurses (14%) reported a history of mental health disorders, of which n = 49 (13%) listed diagnoses of anxiety and/or depression; 22 (6%) were currently taking psychoactive medication. Symptoms that could potentially indicate a mental health issue were more common, with 248 (65.1%) reporting they had experienced symptoms sometimes or often in the last 12 month. Nurses had better mental health if they had better general health, lived with a spouse/ partner rather than alone, had fewer symptoms, sleep problems or disordered eating behaviours, were not an informal carer and did not work nights. Nurses had greater vitality if they were male, had better general health, fewer sleep problems or symptoms generally and lived with a spouse/ partner rather than alone; less vitality if they were an informal carer or had disordered eating. Nurses and their managers should strive to create workplaces where working practices promote nurses' health

Tobacco use in 3 billion individuals from 16 countries: an analysis of nationally representative cross-sectional household surveys.

Science.gov (United States)

Giovino, Gary A; Mirza, Sara A; Samet, Jonathan M; Gupta, Prakash C; Jarvis, Martin J; Bhala, Neeraj; Peto, Richard; Zatonski, Witold; Hsia, Jason; Morton, Jeremy; Palipudi, Krishna M; Asma, Samira

2012-08-18

Despite the high global burden of diseases caused by tobacco, valid and comparable prevalence data for patterns of adult tobacco use and factors influencing use are absent for many low-income and middle-income countries. We assess these patterns through analysis of data from the Global Adult Tobacco Survey (GATS). Between Oct 1, 2008, and March 15, 2010, GATS used nationally representative household surveys with comparable methods to obtain relevant information from individuals aged 15 years or older in 14 low-income and middle-income countries (Bangladesh, Brazil, China, Egypt, India, Mexico, Philippines, Poland, Russia, Thailand, Turkey, Ukraine, Uruguay, and Vietnam). We compared weighted point estimates and 95% CIs of tobacco use between these 14 countries and with data from the 2008 UK General Lifestyle Survey and the 2006-07 US Tobacco Use Supplement to the Current Population Survey. All these surveys had cross-sectional study designs. In countries participating in GATS, 48·6% (95% CI 47·6-49·6) of men and 11·3% (10·7-12·0) of women were tobacco users. 40·7% of men (ranging from 21·6% in Brazil to 60·2% in Russia) and 5·0% of women (0·5% in Egypt to 24·4% in Poland) in GATS countries smoked a tobacco product. Manufactured cigarettes were favoured by most smokers (82%) overall, but smokeless tobacco and bidis were commonly used in India and Bangladesh. For individuals who had ever smoked daily, women aged 55-64 years at the time of the survey began smoking at an older age than did equivalently aged men in most GATS countries. However, those individuals who had ever smoked daily and were aged 25-34-years when surveyed started to do so at much the same age in both sexes. Quit ratios were very low (<20% overall) in China, India, Russia, Egypt, and Bangladesh. The first wave of GATS showed high rates of smoking in men, early initiation of smoking in women, and low quit ratios, reinforcing the view that efforts to prevent initiation and promote

48 CFR 436.605 - Government cost estimate for architect-engineer work.

Science.gov (United States)

2010-10-01

... for architect-engineer work. 436.605 Section 436.605 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Service 436.605 Government cost estimate for architect-engineer work. The contracting...

48 CFR 2436.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 2436.602 Section 2436.602 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 2436.602 Selection of firms for architect-engineer contracts. ...

Emotional engineering – the story of Robots vs Animals

OpenAIRE

Fogg-Rogers, L. A.; Sardo, M.; Boushel, C.

2015-01-01

We are told that engineering is in crisis, with double the number of engineers needed by 2020. Only 7% of the UK’s engineering workforce is female, so many outreach programmes now focus on girls as the next generation. However, engineering is portrayed as a male world in the media; with surveys conjuring images of men in yellow hardhats and overalls. ‘Robots vs Animals’ is a project which set out to challenge these media portrayals using the media technique of storytelling. Stories combine em...

Airplane pilot mental health and suicidal thoughts: a cross-sectional descriptive study via anonymous web-based survey.

Science.gov (United States)

Wu, Alexander C; Donnelly-McLay, Deborah; Weisskopf, Marc G; McNeely, Eileen; Betancourt, Theresa S; Allen, Joseph G

2016-12-15

The Germanwings Flight 9525 crash has brought the sensitive subject of airline pilot mental health to the forefront in aviation. Globally, 350 million people suffer from depression-a common mental disorder. This study provides further information on this important topic regarding mental health especially among female airline pilots. This is the first study to describe airline pilot mental health-with a focus on depression and suicidal thoughts-outside of the information derived from aircraft accident investigations, regulated health examinations, or identifiable self-reports, which are records protected by civil aviation authorities and airline companies. This is a descriptive cross-sectional study via an anonymous web-based survey administered between April and December 2015. Pilots were recruited from unions, airline companies, and airports via convenience sampling. Data analysis included calculating absolute number and prevalence of health characteristics and depression scores. One thousand eight hundred thirty seven (52.7%) of the 3485 surveyed pilots completed the survey, with 1866 (53.5%) completing at least half of the survey. 233 (12.6%) of 1848 airline pilots responding to the Patient Health Questionnaire 9 (PHQ-9), and 193 (13.5%) of 1430 pilots who reported working as an airline pilot in the last seven days at time of survey, met depression threshold-PHQ-9 total score ≥ 10. Seventy-five participants (4.1%) reported having suicidal thoughts within the past two weeks. We found a significant trend in proportions of depression at higher levels of use of sleep-aid medication (trend test z = 6.74, p sexual harassment (z = 3.18, p = 0.001) or verbal harassment (z = 6.13, p < 0.001). Hundreds of pilots currently flying are managing depressive symptoms perhaps without the possibility of treatment due to the fear of negative career impacts. This study found 233 (12.6%) airline pilots meeting depression threshold and 75 (4.1%) pilots