Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

Energy Technology Data Exchange (ETDEWEB)

Sutton, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhao, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-03-24

Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energy Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.

Survey of intravitreal injection techniques among retina specialists in Israel

Directory of Open Access Journals (Sweden)

Segal O

2016-06-01

Full Text Available Ori Segal,1,2 Yael Segal-Trivitz,1,3 Arie Y Nemet,1,2 Noa Geffen,1,2 Ronit Nesher,1,2 Michael Mimouni4 1Department of Ophthalmology, Meir Medical Center, Kfar Saba, 2The Sackler School of Medicine, Tel Aviv University, Tel Aviv, 3Department of Psychiatry, Geha Psychiatric Hospital, Petah Tikva, 4Department of Ophthalmology, Rambam Health Care Campus, Haifa, Israel Purpose: The purpose of this study was to describe antivascular endothelial growth factor intravitreal injection techniques of retinal specialists in order to establish a cornerstone for future practice guidelines. Methods: All members of the Israeli Retina Society were contacted by email to complete an anonymous, 19-question, Internet-based survey regarding their intravitreal injection techniques. Results: Overall, 66% (52/79 completed the survey. Most (98% do not instruct patients to discontinue anticoagulant therapy and 92% prescribe treatment for patients in the waiting room. Three quarters wear sterile gloves and prepare the patient in the supine position. A majority (71% use sterile surgical draping. All respondents apply topical analgesics and a majority (69% measure the distance from the limbus to the injection site. A minority (21% displace the conjunctiva prior to injection. A majority of the survey participants use a 30-gauge needle and the most common quadrant for injection is superotemporal (33%. Less than half routinely assess postinjection optic nerve perfusion (44%. A majority (92% apply prophylactic antibiotics immediately after the injection. Conclusion: The majority of retina specialists perform intravitreal injections similarly. However, a relatively large minority performs this procedure differently. Due to the extremely low percentage of complications, it seems as though such differences do not increase the risk. However, more evidence-based medicine, a cornerstone for practice guidelines, is required in order to identify the intravitreal injection techniques

Complete Denture Impression Techniques Practiced by Private Dental Practitioners: A Survey

OpenAIRE

Kakatkar, Vinay R.

2012-01-01

Impression making is an important step in fabricating complete dentures. A survey to know the materials used and techniques practiced while recording complete denture impressions was conducted. It is disheartening to know that 33 % practitioners still use base plate custom trays to record final impressions. 8 % still use alginate for making final impressions. An acceptable technique for recording CD impressions is suggested.

Use of structured personality survey techniques to indicate operator response to stressful situations

International Nuclear Information System (INIS)

Waller, M.A.

1990-01-01

Under given circumstances, a person will tend to operate in one of four dominant orientations: (1) to perform tasks; (2) to achieve consensus; (3) to achieve understanding, or (4) to maintain structure. Historically, personality survey techniques, such as the Myers-Briggs type indicator, have been used to determine these tendencies. While these techniques can accurately reflect a person's orientation under normal social situations, under different sets of conditions, the same person may exhibit other tendencies, displaying a similar or entirely different orientation. While most do not exhibit extreme tendencies or changes of orientation, the shift in personality from normal to stressful conditions can be rather dramatic, depending on the individual. Structured personality survey techniques have been used to indicate operator response to stressful situations. These techniques have been extended to indicate the balance between orientations that the control room team has through the various levels of cognizance

Investigation of background acoustical effect on online surveys: A case study of a farmers' market customer survey

Science.gov (United States)

Tang, Xingdi

Since the middle of 1990s, internet has become a new platform for surveys. Previous studies have discussed the visual design features of internet surveys. However, the application of acoustics as a design characteristic of online surveys has been rarely investigated. The present study aimed to fill that research gap. The purpose of the study was to assess the impact of background sound on respondents' engagement and satisfaction with online surveys. Two forms of background sound were evaluated; audio recorded in studios and audio edited with convolution reverb technique. The author recruited 80 undergraduate students for the experiment. These students were assigned to one of three groups. Each of the three groups was asked to evaluate their engagement and satisfaction with a specific online survey. The content of the online survey was the same. However, the three groups was exposed to the online survey with no background sound, with background sound recorded in studios; and with background sound edited with convolution reverb technique. The results showed no significant difference in engagement and satisfaction in the three groups of online surveys; without background sound, background sound recorded in studios, and background sound edited with convolution reverb technique. The author suggests that background sound does not contribute to online surveys in all the contexts. The industry practitioners should be careful to evaluate the survey context to decide whether the background sound should be added. Particularly, ear-piercing noise or acoustics which may link to respondents' unpleasant experience should be avoided. Moreover, although the results did not support the advantage of the revolution reverb technique in improving respondents' engagement and satisfaction, the author suggests that the potential of the revolution reverb technique in the applications of online surveys can't be totally denied, since it may be useful for some contexts which need further

Web survey methodology

CERN Document Server

Callegaro, Mario; Vehovar, Asja

2015-01-01

Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

Using Intelligent Techniques in Construction Project Cost Estimation: 10-Year Survey

Directory of Open Access Journals (Sweden)

Abdelrahman Osman Elfaki

2014-01-01

Full Text Available Cost estimation is the most important preliminary process in any construction project. Therefore, construction cost estimation has the lion’s share of the research effort in construction management. In this paper, we have analysed and studied proposals for construction cost estimation for the last 10 years. To implement this survey, we have proposed and applied a methodology that consists of two parts. The first part concerns data collection, for which we have chosen special journals as sources for the surveyed proposals. The second part concerns the analysis of the proposals. To analyse each proposal, the following four questions have been set. Which intelligent technique is used? How have data been collected? How are the results validated? And which construction cost estimation factors have been used? From the results of this survey, two main contributions have been produced. The first contribution is the defining of the research gap in this area, which has not been fully covered by previous proposals of construction cost estimation. The second contribution of this survey is the proposal and highlighting of future directions for forthcoming proposals, aimed ultimately at finding the optimal construction cost estimation. Moreover, we consider the second part of our methodology as one of our contributions in this paper. This methodology has been proposed as a standard benchmark for construction cost estimation proposals.

Surveying Future Surveys

Science.gov (United States)

Carlstrom, John E.

2016-06-01

The now standard model of cosmology has been tested and refined by the analysis of increasingly sensitive, large astronomical surveys, especially with statistically significant millimeter-wave surveys of the cosmic microwave background and optical surveys of the distribution of galaxies. This talk will offer a glimpse of the future, which promises an acceleration of this trend with cosmological information coming from new surveys across the electromagnetic spectrum as well as particles and even gravitational waves.

Fuzzy Bi-level Decision-Making Techniques: A Survey

Directory of Open Access Journals (Sweden)

Guangquan Zhang

2016-04-01

Full Text Available Bi-level decision-making techniques aim to deal with decentralized management problems that feature interactive decision entities distributed throughout a bi-level hierarchy. A challenge in handling bi-level decision problems is that various uncertainties naturally appear in decision-making process. Significant efforts have been devoted that fuzzy set techniques can be used to effectively deal with uncertain issues in bi-level decision-making, known as fuzzy bi-level decision-making techniques, and researchers have successfully gained experience in this area. It is thus vital that an instructive review of current trends in this area should be conducted, not only of the theoretical research but also the practical developments. This paper systematically reviews up-to-date fuzzy bi-level decisionmaking techniques, including models, approaches, algorithms and systems. It also clusters related technique developments into four main categories: basic fuzzy bi-level decision-making, fuzzy bi-level decision-making with multiple optima, fuzzy random bi-level decision-making, and the applications of bi-level decision-making techniques in different domains. By providing state-of-the-art knowledge, this survey paper will directly support researchers and practitioners in their understanding of developments in theoretical research results and applications in relation to fuzzy bi-level decision-making techniques.

Embryo transfer techniques: an American Society for Reproductive Medicine survey of current Society for Assisted Reproductive Technology practices.

Science.gov (United States)

Toth, Thomas L; Lee, Malinda S; Bendikson, Kristin A; Reindollar, Richard H

2017-04-01

To better understand practice patterns and opportunities for standardization of ET. Cross-sectional survey. Not applicable. Not applicable. An anonymous 82-question survey was emailed to the medical directors of 286 Society for Assisted Reproductive Technology member IVF practices. A follow-up survey composed of three questions specific to ET technique was emailed to the same medical directors. Descriptive statistics of the results were compiled. The survey assessed policies, protocols, restrictions, and specifics pertinent to the technique of ET. There were 117 (41%) responses; 32% practice in academic settings and 68% in private practice. Responders were experienced clinicians, half of whom had performed Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Comparison of Satellite Surveying to Traditional Surveying Methods for the Resources Industry

Science.gov (United States)

Osborne, B. P.; Osborne, V. J.; Kruger, M. L.

Modern ground-based survey methods involve detailed survey, which provides three-space co-ordinates for surveyed points, to a high level of accuracy. The instruments are operated by surveyors, who process the raw results to create survey location maps for the subject of the survey. Such surveys are conducted for a location or region and referenced to the earth global co- ordinate system with global positioning system (GPS) positioning. Due to this referencing the survey is only as accurate as the GPS reference system. Satellite survey remote sensing utilise satellite imagery which have been processed using commercial geographic information system software. Three-space co-ordinate maps are generated, with an accuracy determined by the datum position accuracy and optical resolution of the satellite platform.This paper presents a case study, which compares topographic surveying undertaken by traditional survey methods with satellite surveying, for the same location. The purpose of this study is to assess the viability of satellite remote sensing for surveying in the resources industry. The case study involves a topographic survey of a dune field for a prospective mining project area in Pakistan. This site has been surveyed using modern surveying techniques and the results are compared to a satellite survey performed on the same area.Analysis of the results from traditional survey and from the satellite survey involved a comparison of the derived spatial co- ordinates from each method. In addition, comparisons have been made of costs and turnaround time for both methods.The results of this application of remote sensing is of particular interest for survey in areas with remote and extreme environments, weather extremes, political unrest, poor travel links, which are commonly associated with mining projects. Such areas frequently suffer language barriers, poor onsite technical support and resources.

Geothermal survey handbook

Energy Technology Data Exchange (ETDEWEB)

1974-01-01

The objective of this handbook is to publicize widely the nature of geothermal surveys. It covers geothermal survey planning and measurement as well as measurement of thermal conductivity. Methods for the detection of eruptive areas, the measurement of radiative heat using snowfall, the measurement of surface temperature using infrared radiation and the measurement of thermal flow are described. The book also contains information on physical detection of geothermal reservoirs, the measurement of spring wells, thermographic measurement of surface heat, irregular layer surveying, air thermographics and aerial photography. Isotope measurement techniques are included.

National and Regional Surveys of Radon Concentration in Dwellings. Review of Methodology and Measurement Techniques

International Nuclear Information System (INIS)

2013-01-01

Reliable, comparable and 'fit for purpose' results are essential requirements for any decision based on analytical measurements. For the analyst, the availability of tested and validated sampling and analytical procedures is an extremely important tool for carrying out such measurements. For maximum utility, such procedures should be comprehensive, clearly formulated and readily available to both the analyst and the customer for reference. In the specific case of radon surveys, it is very important to design a survey in such a way as to obtain results that can reasonably be considered representative of a population. Since 2004, the Environment Programme of the IAEA has included activities aimed at the development of a set of procedures for the measurement of radionuclides in terrestrial environmental samples. The development of radon measurement procedures for national and regional surveys started with the collection and review of more than 160 relevant scientific papers. On the basis of this review, this publication summarizes the methodology and the measurement techniques suitable for a population representative national or regional survey on radon concentration in the indoor air of dwellings. The main elements of the survey design are described and discussed, such as the sampling scheme, the protocols, the questionnaire and the data analysis, with particular attention to the potential biases that can affect the representativeness of the results. Moreover, the main measurement techniques suitable for national surveys on indoor radon are reviewed, with particular attention to the elements that can affect the precision and accuracy of the results

National and Regional Surveys of Radon Concentration in Dwellings. Review of Methodology and Measurement Techniques

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-12-15

Reliable, comparable and 'fit for purpose' results are essential requirements for any decision based on analytical measurements. For the analyst, the availability of tested and validated sampling and analytical procedures is an extremely important tool for carrying out such measurements. For maximum utility, such procedures should be comprehensive, clearly formulated and readily available to both the analyst and the customer for reference. In the specific case of radon surveys, it is very important to design a survey in such a way as to obtain results that can reasonably be considered representative of a population. Since 2004, the Environment Programme of the IAEA has included activities aimed at the development of a set of procedures for the measurement of radionuclides in terrestrial environmental samples. The development of radon measurement procedures for national and regional surveys started with the collection and review of more than 160 relevant scientific papers. On the basis of this review, this publication summarizes the methodology and the measurement techniques suitable for a population representative national or regional survey on radon concentration in the indoor air of dwellings. The main elements of the survey design are described and discussed, such as the sampling scheme, the protocols, the questionnaire and the data analysis, with particular attention to the potential biases that can affect the representativeness of the results. Moreover, the main measurement techniques suitable for national surveys on indoor radon are reviewed, with particular attention to the elements that can affect the precision and accuracy of the results.

Multiagency radiation survey and site investigation manual (MARSSIM): Survey design

International Nuclear Information System (INIS)

Abelquist, E.W.; Berger, J.D.

1996-01-01

This paper describes the MultiAgency Radiation Survey and Site Investigation Manual (MARSSIM) strategy for designing a final status survey. The purpose of the final status survey is to demonstrate that release criteria established by the regulatory agency have been met. Survey design begins with identification of the contaminants and determination of whether the radionuclides of concern exist in background. The decommissioned site is segregated into Class 1, Class 2, and Class 3 areas, based on contamination potential, and each area is further divided into survey units. Appropriate reference areas for indoor and outdoor background measurements are selected. Survey instrumentation and techniques are selected in order to assure that the instrumentation is capable of detecting the contamination at the derived concentration guideline level (DCGL). Survey reference systems are established and the number of survey data points is determined-with the required number of data points distributed on a triangular grid Pattern. Two suitistical tests are used to evaluate data from final status surveys. For contaminants that are b, present in background, the Wilcoxon Rank Sum test is used; for contaminants that are not present in background, the Wilcoxon Signed Rank (or Sign) test is used. The number of data points needed to satisfy these nonparametric tests is based on the contaminant DCGL value, the expected Standard deviation of the contaminant in background and in the survey unit, and the acceptable probability of making Type I and Type II decision errors. The MARSSIM also requires a reasonable level of assurance that any small areas of elevated residual radioactivity that could be significant relative to regulatory limits are not missed during the final status survey. Measurements and sampling on a specified grid size are used to obtain an adequate assurance level that small locations of elevated radioactivity will Still satisfy DCGLs-applicable to small areas

Plane and geodetic surveying

CERN Document Server

Johnson, Aylmer

2014-01-01

IntroductionAim And ScopeClassification Of SurveysThe Structure Of This BookGeneral Principles Of SurveyingErrorsRedundancyStiffnessAdjustmentPlanning And Record KeepingPrincipal Surveying ActivitiesEstablishing Control NetworksMappingSetting OutResectioningDeformation MonitoringAngle MeasurementThe Surveyor's CompassThe ClinometerThe Total StationMaking ObservationsChecks On Permanent AdjustmentsDistance MeasurementGeneralTape MeasurementsOptical Methods (Tachymetry)Electromagnetic Distance Measurement (EDM)Ultrasonic MethodsGNSSLevellingTheoryThe InstrumentTechniqueBookingPermanent Adjustmen

A Survey of Soft-Error Mitigation Techniques for Non-Volatile Memories

Directory of Open Access Journals (Sweden)

Sparsh Mittal

2017-02-01

Full Text Available Non-volatile memories (NVMs offer superior density and energy characteristics compared to the conventional memories; however, NVMs suffer from severe reliability issues that can easily eclipse their energy efficiency advantages. In this paper, we survey architectural techniques for improving the soft-error reliability of NVMs, specifically PCM (phase change memory and STT-RAM (spin transfer torque RAM. We focus on soft-errors, such as resistance drift and write disturbance, in PCM and read disturbance and write failures in STT-RAM. By classifying the research works based on key parameters, we highlight their similarities and distinctions. We hope that this survey will underline the crucial importance of addressing NVM reliability for ensuring their system integration and will be useful for researchers, computer architects and processor designers.

Chapter 6. Dwarf mistletoe surveys

Science.gov (United States)

J.A. Muir; B. Moody

2002-01-01

Dwarf mistletoe surveys are conducted for a variety of vegetation management objectives. Various survey and sampling techniques are used either at a broad, landscape scale in forest planning or program review, or at an individual, stand, site level for specific project implementation. Standard and special surveys provide data to map mistletoe distributions and quantify...

Conducting Web-based Surveys.

OpenAIRE

David J. Solomon

2001-01-01

Web-based surveying is becoming widely used in social science and educational research. The Web offers significant advantages over more traditional survey techniques however there are still serious methodological challenges with using this approach. Currently coverage bias or the fact significant numbers of people do not have access, or choose not to use the Internet is of most concern to researchers. Survey researchers also have much to learn concerning the most effective ways to conduct s...

Survey of technology for decommissioning of nuclear fuel cycle facilities. 8. Remote handling and cutting techniques

Energy Technology Data Exchange (ETDEWEB)

Ogawa, Ryuichiro; Ishijima, Noboru [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

1999-03-01

In nuclear fuel cycle facility decommissioning and refurbishment, the remote handling techniques such as dismantling, waste handling and decontamination are needed to reduce personnel radiation exposure. The survey research for the status of R and D activities on remote handling tools suitable for nuclear facilities in the world and domestic existing commercial cutting tools applicable to decommissioning of the facilities was conducted. In addition, the drive mechanism, sensing element and control system applicable to the remote handling devices were also surveyed. This report presents brief surveyed summaries. (H. Itami)

UAS Mapping as an alternative for land surveying techniques?

Directory of Open Access Journals (Sweden)

L. Devriendt

2014-03-01

Full Text Available Can a UAS mapping technique compete with standard surveying techniques? Since the boom in different RPAS (remotely piloted air system, UAV (unmanned aerial vehicle, or UAS (unmanned aerial system, this is one of the crucial questions when it comes to UAS mappings. Not the looks and feels are important but the reliability, ease-to-use, and accuracy that you get with a system based on hardware and corresponding software. This was also one of the issues that the Dutch Land Registry asked a few months ago aimed at achieving an effective and usable system for updating property boundaries in new-build districts. Orbit GT gave them a ready-made answer: a definitive outcome based on years of research and development in UAS mapping technology and software.

Total Survey Error for Longitudinal Surveys

NARCIS (Netherlands)

Lynn, Peter; Lugtig, P.J.

2016-01-01

This article describes the application of the total survey error paradigm to longitudinal surveys. Several aspects of survey error, and of the interactions between different types of error, are distinct in the longitudinal survey context. Furthermore, error trade-off decisions in survey design and

Web-based Surveys: Changing the Survey Process

OpenAIRE

Gunn, Holly

2002-01-01

Web-based surveys are having a profound influence on the survey process. Unlike other types of surveys, Web page design skills and computer programming expertise play a significant role in the design of Web-based surveys. Survey respondents face new and different challenges in completing a Web-based survey. This paper examines the different types of Web-based surveys, the advantages and challenges of using Web-based surveys, the design of Web-based surveys, and the issues of validity, error, ...

Technical errors in complete mouth radiographic survey according to radiographic techniques and film holding methods

International Nuclear Information System (INIS)

Choi, Karp Sik; Byun, Chong Soo; Choi, Soon Chul

1986-01-01

The purpose of this study was to investigate the numbers and causes of retakes in 300 complete mouth radiographic surveys made by 75 senior dental students. According to radiographic techniques and film holding methods, they were divided into 4 groups: Group I: Bisecting-angle technique with patient's fingers. Group II: Bisecting-angle technique with Rinn Snap-A-Ray device. Group III: Bisecting-angle technique with Rinn XCP instrument (short cone) Group IV: Bisecting-angle technique with Rinn XCP instrument (long cone). The most frequent cases of retakes, the most frequent tooth area examined, of retakes and average number of retakes per complete mouth survey were evaluated. The obtained results were as follows: Group I: Incorrect film placement (47.8), upper canine region, and 0.89. Group II: Incorrect film placement (44.0), upper canine region, and 1.12. Group III: Incorrect film placement (79.2), upper canine region, and 2.05. Group IV: Incorrect film placement (67.7), upper canine region, and 1.69.

Electronic surveys: how to maximise success.

Science.gov (United States)

McPeake, Joanne; Bateson, Meghan; O'Neill, Anna

2014-01-01

To draw on the researchers' experience of developing and distributing a UK-wide electronic survey. The evolution of electronic surveys in healthcare research will be discussed, as well as simple techniques that can be used to improve response rates for this type of data collection. There is an increasing use of electronic survey methods in healthcare research. However, in recent published research, electronic surveys have had lower response rates than traditional survey methods, such as postal and telephone surveys. This is a methodology paper. Electronic surveys have many advantages over traditional surveys, including a reduction in cost and ease of analysis. Drawbacks to this type of data collection include the potential for selection bias and poorer response rates. However, research teams can use a range of simple strategies to boost response rates. These approaches target the different stages of achieving a complete response: initial attraction through personalisation, engagement by having an easily accessible link to the survey, and transparency of survey length and completion though targeting the correct, and thereby interested, population. The fast, efficient and often 'free' electronic survey has many advantages over the traditional postal data collection method, including ease of analysis for what can be vast amounts of data. However, to capitalise on these benefits, researchers must carefully consider techniques to maximise response rates and minimise selection bias for their target population. Researchers can use a range of strategies to improve responses from electronic surveys, including sending up to three reminders, personalising each email, adding the updated response rate to reminder emails, and stating the average time it would take to complete the survey in the title of the email.

Lot quality assurance sampling techniques in health surveys in developing countries: advantages and current constraints.

Science.gov (United States)

Lanata, C F; Black, R E

1991-01-01

Traditional survey methods, which are generally costly and time-consuming, usually provide information at the regional or national level only. The utilization of lot quality assurance sampling (LQAS) methodology, developed in industry for quality control, makes it possible to use small sample sizes when conducting surveys in small geographical or population-based areas (lots). This article describes the practical use of LQAS for conducting health surveys to monitor health programmes in developing countries. Following a brief description of the method, the article explains how to build a sample frame and conduct the sampling to apply LQAS under field conditions. A detailed description of the procedure for selecting a sampling unit to monitor the health programme and a sample size is given. The sampling schemes utilizing LQAS applicable to health surveys, such as simple- and double-sampling schemes, are discussed. The interpretation of the survey results and the planning of subsequent rounds of LQAS surveys are also discussed. When describing the applicability of LQAS in health surveys in developing countries, the article considers current limitations for its use by health planners in charge of health programmes, and suggests ways to overcome these limitations through future research. It is hoped that with increasing attention being given to industrial sampling plans in general, and LQAS in particular, their utilization to monitor health programmes will provide health planners in developing countries with powerful techniques to help them achieve their health programme targets.

Nuclear assay of coal. Volume 4. Moisture determination in coal: survey of electromagnetic techniques. Final report

International Nuclear Information System (INIS)

Bevan, R.; Luckie, P.; Gozani, T.; Brown, D.R.; Bozorgmanesh, H.; Elias, E.

1979-01-01

This survey consists of two basic parts. The first consists of a survey of various non-nuclear moisture determination techniques. Three techniques are identified as promising for eventual on-line application with coal; these are the capacitance, microwave attenuation, and nuclear magnetic resonance (NMR) techniques. The second part is devoted to an in-depth analysis of these three techniques and the current extent to which they have been applied to coal. With a given coal type, accuracies of +- 1% absolute in moisture content are achievable with all three techniques. The accuracy of the two electromagnetic techniques has been demonstrated in the laboratory and on-line in coal burning plants, whereas only small samples have been analyzed with NMR. The current shortcoming of the simple electromagnetic techniques is the sensitivity of calibrations to physical parameters and coal type. NMR is currently limited by small sample sizes and non-rugged design. These findings are summarized and a list of manufacturers of moisture analyzers is given in the Appendix

Improving Standard Poststratification Techniques For Random-Digit-Dialing Telephone Surveys

Directory of Open Access Journals (Sweden)

Michael P. Battaglia

2008-03-01

Full Text Available Random-digit-dialing surveys in the United States such as the Behavioral Risk Factor Surveillance System (BRFSS typically poststratify on age, gender and race/ethnicity using control totals from an appropriate source such as the 2000 Census, the Current Population Survey, or the American Community Survey. Using logistic regression and interaction detection software we identified key "main effect" socio-demographic variables and important two-factor interactions associated with several health risk factor outcomes measured in the BRFSS, one of the largest annual RDD surveys in the United States. A procedure was developed to construct control totals, which were consistent with estimates of age, gender, and race/ethnicity obtained from a commercial source and distributions of other demographic variables from the Current Population Survey. Raking was used to incorporate main effects and two-factor interaction margins into the weighting of the BRFSS survey data. The resulting risk factor estimates were then compared with those based on the current BRFSS weighting methodology and mean squared error estimates were developed. The research demonstrates that by identifying socio-demographic variables associated with key outcome variables and including these variables in the weighting methodology, nonresponse bias can be substantially reduced.

Visual servoing in medical robotics: a survey. Part II: tomographic imaging modalities--techniques and applications.

Science.gov (United States)

Azizian, Mahdi; Najmaei, Nima; Khoshnam, Mahta; Patel, Rajni

2015-03-01

Intraoperative application of tomographic imaging techniques provides a means of visual servoing for objects beneath the surface of organs. The focus of this survey is on therapeutic and diagnostic medical applications where tomographic imaging is used in visual servoing. To this end, a comprehensive search of the electronic databases was completed for the period 2000-2013. Existing techniques and products are categorized and studied, based on the imaging modality and their medical applications. This part complements Part I of the survey, which covers visual servoing techniques using endoscopic imaging and direct vision. The main challenges in using visual servoing based on tomographic images have been identified. 'Supervised automation of medical robotics' is found to be a major trend in this field and ultrasound is the most commonly used tomographic modality for visual servoing. Copyright © 2014 John Wiley & Sons, Ltd.

Terminating Sequential Delphi Survey Data Collection

Science.gov (United States)

Kalaian, Sema A.; Kasim, Rafa M.

2012-01-01

The Delphi survey technique is an iterative mail or electronic (e-mail or web-based) survey method used to obtain agreement or consensus among a group of experts in a specific field on a particular issue through a well-designed and systematic multiple sequential rounds of survey administrations. Each of the multiple rounds of the Delphi survey…

[Abortion in Brazil: a household survey using the ballot box technique].

Science.gov (United States)

Diniz, Debora; Medeiros, Marcelo

2010-06-01

This study presents the first results of the National Abortion Survey (PNA, Pesquisa Nacional de Aborto), a household random sample survey fielded in 2010 covering urban women in Brazil aged 18 to 39 years. The PNA combined two techniques, interviewer-administered questionnaires and self-administered ballot box questionnaires. The results of PNA show that at the end of their reproductive health one in five women has performed an abortion, with abortions being more frequent in the main reproductive ages, that is, from 18 to 29 years old. No relevant differentiation was observed in the practice of abortion among religious groups, but abortion was found to be more common among people with lower education. The use of medical drugs to induce abortion occurred in half of the abortions, and post-abortion hospitalization was observed among approximately half of the women who aborted. Such results lead to conclude that abortion is a priority in the Brazilian public health agenda.

A Survey of 2D Face Recognition Techniques

Directory of Open Access Journals (Sweden)

Mejda Chihaoui

2016-09-01

Full Text Available Despite the existence of various biometric techniques, like fingerprints, iris scan, as well as hand geometry, the most efficient and more widely-used one is face recognition. This is because it is inexpensive, non-intrusive and natural. Therefore, researchers have developed dozens of face recognition techniques over the last few years. These techniques can generally be divided into three categories, based on the face data processing methodology. There are methods that use the entire face as input data for the proposed recognition system, methods that do not consider the whole face, but only some features or areas of the face and methods that use global and local face characteristics simultaneously. In this paper, we present an overview of some well-known methods in each of these categories. First, we expose the benefits of, as well as the challenges to the use of face recognition as a biometric tool. Then, we present a detailed survey of the well-known methods by expressing each method’s principle. After that, a comparison between the three categories of face recognition techniques is provided. Furthermore, the databases used in face recognition are mentioned, and some results of the applications of these methods on face recognition databases are presented. Finally, we highlight some new promising research directions that have recently appeared.

A survey on OFDM channel estimation techniques based on denoising strategies

Directory of Open Access Journals (Sweden)

Pallaviram Sure

2017-04-01

Full Text Available Channel estimation forms the heart of any orthogonal frequency division multiplexing (OFDM based wireless communication receiver. Frequency domain pilot aided channel estimation techniques are either least squares (LS based or minimum mean square error (MMSE based. LS based techniques are computationally less complex. Unlike MMSE ones, they do not require a priori knowledge of channel statistics (KCS. However, the mean square error (MSE performance of the channel estimator incorporating MMSE based techniques is better compared to that obtained with the incorporation of LS based techniques. To enhance the MSE performance using LS based techniques, a variety of denoising strategies have been developed in the literature, which are applied on the LS estimated channel impulse response (CIR. The advantage of denoising threshold based LS techniques is that, they do not require KCS but still render near optimal MMSE performance similar to MMSE based techniques. In this paper, a detailed survey on various existing denoising strategies, with a comparative discussion of these strategies is presented.

Solid state semiconductor detectorized survey meter

International Nuclear Information System (INIS)

Okamoto, Eisuke; Nagase, Yoshiyuki; Furuhashi, Masato

1987-01-01

Survey meters are used for measurement of gamma ray dose rate of the space and the surface contamination dencity that the atomic energy plant and the radiation facility etc. We have recently developed semiconductor type survey meter (Commercial name: Compact Survey Meter). This survey meter is a small-sized dose rate meter with excellent function. The special features are using semiconductor type detector which we have developed by our own technique, stablar wide range than the old type, long life, and easy to carry. Now we introduce the efficiency and the function of the survey meter. (author)

Survey on development of brown coal liquefaction techniques; Kattan ekika gijutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-09-01

Described herein are results of literature survey on brown coal liquefaction reactions and elementary techniques. Liquefaction of brown coal in the presence of CO and steam, or CO, H{sub 2} and steam has been investigated. It is not clear by the literature survey whether it is superior to the normal process which uses hydrogen. Brown coal contains moisture at high contents, and the drying techniques are necessary to be developed for its liquefaction. The future coal liquefaction plant will be much larger than the past one, and there are a number of problems to be solved, such as those involved in the designs of large-sized high-pressure slurry pumps, heat exchangers and preheaters. It is also necessary to develop the materials of and production techniques for large reactors which are serviceable under severe conditions. The solid-liquid separation for liquefaction products involves a number of the elementary techniques characteristic of coal liquefaction processes, and needs many technological developments. The one-stage brown coal liquefaction process is compared with the two-stage process for the secondary hydrogenation of SCR, but no clear conclusions are reached. (NEDO)

Australian survey on current practices for breast radiotherapy.

Science.gov (United States)

Dundas, Kylie L; Pogson, Elise M; Batumalai, Vikneswary; Boxer, Miriam M; Yap, Mei Ling; Delaney, Geoff P; Metcalfe, Peter; Holloway, Lois

2015-12-01

Detailed, published surveys specific to Australian breast radiotherapy practice were last conducted in 2002. More recent international surveys specific to breast radiotherapy practice include a European survey conducted in 2008/2009 and a Spanish survey conducted in 2009. Radiotherapy techniques continue to evolve, and the utilisation of new techniques, such as intensity-modulated radiation therapy (IMRT), is increasing. This survey aimed to determine current breast radiotherapy practices across Australia. An online survey was completed by 50 of the 69 Australian radiation therapy treatment centres. Supine tangential beam whole breast irradiation remains the standard of care for breast radiotherapy in Australia. A growing number of institutions are exploring prone positioning and IMRT utilisation. This survey demonstrated a wide variation in the benchmarks used to limit and report organ at risk doses, prescribed dose regimen, and post-mastectomy bolus practices. This survey also indicated, when compared with international literature, that there may be less interest in or uptake of external beam partial breast irradiation, prone positioning, simultaneous integrated boost and breath hold techniques. These are areas where further review and research may be warranted to ensure Australian patients are receiving the best care possible based on the best evidence available. This survey provides insight into the current radiotherapy practice for breast cancer in Australia. © 2015 The Royal Australian and New Zealand College of Radiologists.

Prenotification, Incentives, and Survey Modality: An Experimental Test of Methods to Increase Survey Response Rates of School Principals

Science.gov (United States)

Jacob, Robin Tepper; Jacob, Brian

2012-01-01

Teacher and principal surveys are among the most common data collection techniques employed in education research. Yet there is remarkably little research on survey methods in education, or about the most cost-effective way to raise response rates among teachers and principals. In an effort to explore various methods for increasing survey response…

The mobile image quality survey game

Science.gov (United States)

Rasmussen, D. René

2012-01-01

In this paper we discuss human assessment of the quality of photographic still images, that are degraded in various manners relative to an original, for example due to compression or noise. In particular, we examine and present results from a technique where observers view images on a mobile device, perform pairwise comparisons, identify defects in the images, and interact with the display to indicate the location of the defects. The technique measures the response time and accuracy of the responses. By posing the survey in a form similar to a game, providing performance feedback to the observer, the technique attempts to increase the engagement of the observers, and to avoid exhausting observers, a factor that is often a problem for subjective surveys. The results are compared with the known physical magnitudes of the defects and with results from similar web-based surveys. The strengths and weaknesses of the technique are discussed. Possible extensions of the technique to video quality assessment are also discussed.

Discussion on emergency aerial survey system for practical use

International Nuclear Information System (INIS)

Moriuchi, Shigeru; Nagaoka, Toshi; Sakamoto, Ryuichi; Tsutsumi, Masahiro; Satio, Kimiaki; Amano, Hikaru; Matsunaga, Takeshi; Yanase, Nobuyuki; Kasai, Atsushi

1989-02-01

In 1980, after the occurrence of the TMI-2 accident in the United States, JAERI started the research and development of aerial survey techniques, and completed two prototype aerial survey systems in 1985 for gamma ray survey and for radioactivity monitoring. Following the Chernobyl reactor accident which occured in Soviet Union in 1986, European countries experienced environmental radiological monitoring using their aerial survey systems, and proved the effectiveness of aerial survey in the emergency. This report describes the outline of the prototype survey systems developed at JAERI, and showed the practical survey systems data processing, data analysis and the techniques including data processing, data analysis and the example outputs. Also, this report made some proposals concerning practical construction and the arrangement of the aerial survey equipments and the establishment of organization which takes charge of the practical emergency survey and the routine maintenance, based on our past experience. (author)

Comparative cost assessment of the Kato-Katz and FLOTAC techniques for soil-transmitted helminth diagnosis in epidemiological surveys

Directory of Open Access Journals (Sweden)

Speich Benjamin

2010-08-01

Full Text Available Abstract Background The Kato-Katz technique is widely used for the diagnosis of soil-transmitted helminthiasis in epidemiological surveys and is believed to be an inexpensive method. The FLOTAC technique shows a higher sensitivity for the diagnosis of light-intensity soil-transmitted helminth infections but is reported to be more complex and expensive. We assessed the costs related to the collection, processing and microscopic examination of stool samples using the Kato-Katz and FLOTAC techniques in an epidemiological survey carried out in Zanzibar, Tanzania. Methods We measured the time for the collection of a single stool specimen in the field, transfer to a laboratory, preparation and microscopic examination using standard protocols for the Kato-Katz and FLOTAC techniques. Salaries of health workers, life expectancy and asset costs of materials, and infrastructure costs were determined. The average cost for a single or duplicate Kato-Katz thick smears and the FLOTAC dual or double technique were calculated. Results The average time needed to collect a stool specimen and perform a single or duplicate Kato-Katz thick smears or the FLOTAC dual or double technique was 20 min and 34 sec (20:34 min, 27:21 min, 28:14 min and 36:44 min, respectively. The total costs for a single and duplicate Kato-Katz thick smears were US$ 1.73 and US$ 2.06, respectively, and for the FLOTAC double and dual technique US$ 2.35 and US$ 2.83, respectively. Salaries impacted most on the total costs of either method. Conclusions The time and cost for soil-transmitted helminth diagnosis using either the Kato-Katz or FLOTAC method in epidemiological surveys are considerable. Our results can help to guide healthcare decision makers and scientists in budget planning and funding for epidemiological surveys, anthelminthic drug efficacy trials and monitoring of control interventions.

A SURVEY OF AUTOMATION TECHNIQUES COMING FORTH IN SHEET-FED OFFSET PRINTING ORGANIZATIONS

OpenAIRE

Mr. Ramesh Kumar*, Mr. Bijender & Mr. Sandeep Boora

2017-01-01

Sheet-Fed offset is one of the premier processes in India as well as abroad. To cope up with customers large quantity demands automation has become mandatory. From prepress to post press a wide range of automation techniques exist and coming forth for sheet fed offset presses. Objective of this paper is to throw light on various sheet-fed offset automation techniques existing today and their futuristic implications. The data related to automation was collected with the help of survey conducte...

Farmer survey in the hinterland of Kisangani (Democratic Republic of Congo) on rodent crop damage and rodent control techniques used

DEFF Research Database (Denmark)

Drazo, Nicaise Amundala; Kennis, Jan; Leirs, Herwig

2008-01-01

We conducted a survey on rodent crop damage among farmers in the hinterland of Kisangani (Democratic Republic of Congo). We studied the amount of crop damage, the rodent groups causing crop damage, the growth stages affected and the control techniques used. We conducted this survey in three...... municipalities using a standard questionnaire form translated into local languages, between November 2005 and June 2006 and during July 2007. We used the Quotas method and interviewed 70 households per municipality. Farmers indicated rodent groups implicated in crop damage on color photographs. Two types...... of survey techniques were used: individual and focus-group surveys. The sugar cane rat, Thryonomys sp. and Lemniscomys striatus caused most damage to crops, but inside granaries, Rattus rattus was the primary pest species eating stored food supplies and causing damage to stored goods. Cassava and maize were...

A survey on the application of robot techniques to an atomic power plant

International Nuclear Information System (INIS)

Hasegawa, Tsutomu; Sato, Tomomasa; Hirai, Shigeoki; Suehiro, Takashi; Okada, Tokuji

1982-01-01

Tasks of workers in atomic power plants have been surveyed from the viewpoint of necessity and possibility of their robotization. The daily tasks are classified into the following: (1) plant operation; (2) periodical examination; (3) patrol and inspection; (4) in-service inspection; (5) maintenance and repaire; (6) examination and production of the fuel; (7) waste disposal; (8) decommission of the plant. The necessity and present status of the robotization in atomic power plants are investigated according to the following classification: (1) inspection robots; (2) patrol inspection/maintenance robots; (3) hot cell robots; (4) plant decommission robots. The following have been made clear through the survey: (1) Various kinds of tasks are necessary for an atomic power plant: (2) Because of most of the tasks taking place in intense radiation environments, it is necessary to introduce robots into atomic power plants: (3) In application of robots in atomic power plant systems, it is necessary to take account of various severe conditions concerning spatial restrictions, radioactive endurance and reliability. Lastly wide applicability of the techniques of knowledge robots, which operate interactively with men, has been confirmed as a result of the survey. (author)

Survey of agents and techniques applicable to the solidification of low-level radioactive wastes

International Nuclear Information System (INIS)

Fuhrmann, M.; Neilson, R.M. Jr.; Colombo, P.

1981-12-01

A review of the various solidification agents and techniques that are currently available or potentially applicable for the solidification of low-level radioactive wastes is presented. An overview of the types and quantities of low-level wastes produced is presented. Descriptions of waste form matrix materials, the wastes types for which they have been or may be applied and available information concerning relevant waste form properties and characteristics follow. Also included are descriptions of the processing techniques themselves with an emphasis on those operating parameters which impact upon waste form properties. The solidification agents considered in this survey include: hydraulic cements, thermoplastic materials, thermosetting polymers, glasses, synthetic minerals and composite materials. This survey is part of a program supported by the United States Department of Energy's Low-Level Waste Management Program (LLWMP). This work provides input into LLWMP efforts to develop and compile information relevant to the treatment and processing of low-level wastes and their disposal by shallow land burial

Survey of agents and techniques applicable to the solidification of low-level radioactive wastes

Energy Technology Data Exchange (ETDEWEB)

Fuhrmann, M.; Neilson, R.M. Jr.; Colombo, P.

1981-12-01

A review of the various solidification agents and techniques that are currently available or potentially applicable for the solidification of low-level radioactive wastes is presented. An overview of the types and quantities of low-level wastes produced is presented. Descriptions of waste form matrix materials, the wastes types for which they have been or may be applied and available information concerning relevant waste form properties and characteristics follow. Also included are descriptions of the processing techniques themselves with an emphasis on those operating parameters which impact upon waste form properties. The solidification agents considered in this survey include: hydraulic cements, thermoplastic materials, thermosetting polymers, glasses, synthetic minerals and composite materials. This survey is part of a program supported by the United States Department of Energy's Low-Level Waste Management Program (LLWMP). This work provides input into LLWMP efforts to develop and compile information relevant to the treatment and processing of low-level wastes and their disposal by shallow land burial.

Arecibo pulsar survey using ALFA. III. Precursor survey and population synthesis

Energy Technology Data Exchange (ETDEWEB)

Swiggum, J. K.; Lorimer, D. R.; McLaughlin, M. A.; Bates, S. D.; Senty, T. R. [Department of Physics and Astronomy, West Virginia University, Morgantown, WV 26506 (United States); Champion, D. J.; Lazarus, P. [Max-Planck-Institut für Radioastronomie, D-53121 Bonn (Germany); Ransom, S. M. [NRAO, Charlottesville, VA 22903 (United States); Brazier, A.; Chatterjee, S.; Cordes, J. M. [Astronomy Department, Cornell University, Ithaca, NY 14853 (United States); Hessels, J. W. T. [ASTRON, Netherlands Institute for Radio Astronomy, Postbus 2, 7990 AA, Dwingeloo (Netherlands); Nice, D. J. [Department of Physics, Lafayette College, Easton, PA 18042 (United States); Ellis, J.; Allen, B. [Physics Department, University of Wisconsin-Milwaukee, Milwaukee WI 53211 (United States); Bhat, N. D. R. [Center for Astrophysics and Supercomputing, Swinburne University, Hawthorn, Victoria 3122 (Australia); Bogdanov, S.; Camilo, F. [Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027 (United States); Crawford, F. [Department of Physics and Astronomy, Franklin and Marshall College, Lancaster, PA 17604-3003 (United States); Deneva, J. S. [Arecibo Observatory, HC3 Box 53995, Arecibo, PR 00612 (United States); and others

2014-06-01

The Pulsar Arecibo L-band Feed Array (PALFA) Survey uses the ALFA 7-beam receiver to search both inner and outer Galactic sectors visible from Arecibo (32° ≲ ℓ ≲ 77° and 168° ≲ ℓ ≲ 214°) close to the Galactic plane (|b| ≲ 5°) for pulsars. The PALFA survey is sensitive to sources fainter and more distant than have previously been seen because of Arecibo's unrivaled sensitivity. In this paper we detail a precursor survey of this region with PALFA, which observed a subset of the full region (slightly more restrictive in ℓ and |b| ≲ 1°) and detected 45 pulsars. Detections included 1 known millisecond pulsar and 11 previously unknown, long-period pulsars. In the surveyed part of the sky that overlaps with the Parkes Multibeam Pulsar Survey (36° ≲ ℓ ≲ 50°), PALFA is probing deeper than the Parkes survey, with four discoveries in this region. For both Galactic millisecond and normal pulsar populations, we compare the survey's detections with simulations to model these populations and, in particular, to estimate the number of observable pulsars in the Galaxy. We place 95% confidence intervals of 82,000 to 143,000 on the number of detectable normal pulsars and 9000 to 100,000 on the number of detectable millisecond pulsars in the Galactic disk. These are consistent with previous estimates. Given the most likely population size in each case (107,000 and 15,000 for normal and millisecond pulsars, respectively), we extend survey detection simulations to predict that, when complete, the full PALFA survey should have detected 1000{sub −230}{sup +330} normal pulsars and 30{sub −20}{sup +200} millisecond pulsars. Identical estimation techniques predict that 490{sub −115}{sup +160} normal pulsars and 12{sub −5}{sup +70} millisecond pulsars would be detected by the beginning of 2014; at the time, the PALFA survey had detected 283 normal pulsars and 31 millisecond pulsars, respectively. We attribute the deficiency in normal pulsar

Sci-Fri PM: Radiation Therapy, Planning, Imaging, and Special Techniques - 10: Results from Canada Wide Survey on Total Body Irradiation Practice

Energy Technology Data Exchange (ETDEWEB)

Studinski, Ryan; Fraser, Danielle; Samant, Rajiv; MacPherson, Miller [The Ottawa Hospital Cancer Centre, The Ottawa Hospital Cancer Centre, The Ottawa Hospital Cancer Centre, The Ottawa Hospital Cancer Centre (Canada)

2016-08-15

Purpose: Total Body Irradiation (TBI) is delivered to a relatively small number of patients with a variety of techniques; it has been a challenge to develop consensus studies for best practice. This survey was created to assess the current state of TBI in Canada. Methods: The survey was created with questions focusing on the radiation prescription, delivery technique and resources involved. The survey was circulated electronically to the heads of every clinical medical physics department in Canada. Responses were gathered and collated, and centres that were known to deliver TBI were urged to respond. Results: Responses from 20 centres were received, including 12 from centres that perform TBI. Although a variety of TBI dose prescriptions were reported, 12 Gy in 6 fractions was used in 11 centres while 5 centres use unique prescriptions. For dose rate, a range of 9 to 51 cGy/min was reported. Most centres use an extended SSD technique, with the patient standing or lying down against a wall. The rest use either a “sweeping” technique or a more complicated multi-field technique. All centres but one indicated that they shield the lungs, and only a minority shield other organs. The survey also showed that considerable resources are used for TBI including extra staffing, extended planning and treatment times and the use of locally developed hardware or software. Conclusions: This survey highlights that both similarities and important discrepancies exist between TBI techniques across the country, and is an opportunity to prompt more collaboration between centres.

Aerial surveys adjusted by ground surveys to estimate area occupied by black-tailed prairie dog colonies

Science.gov (United States)

Sidle, John G.; Augustine, David J.; Johnson, Douglas H.; Miller, Sterling D.; Cully, Jack F.; Reading, Richard P.

2012-01-01

Aerial surveys using line-intercept methods are one approach to estimate the extent of prairie dog colonies in a large geographic area. Although black-tailed prairie dogs (Cynomys ludovicianus) construct conspicuous mounds at burrow openings, aerial observers have difficulty discriminating between areas with burrows occupied by prairie dogs (colonies) versus areas of uninhabited burrows (uninhabited colony sites). Consequently, aerial line-intercept surveys may overestimate prairie dog colony extent unless adjusted by an on-the-ground inspection of a sample of intercepts. We compared aerial line-intercept surveys conducted over 2 National Grasslands in Colorado, USA, with independent ground-mapping of known black-tailed prairie dog colonies. Aerial line-intercepts adjusted by ground surveys using a single activity category adjustment overestimated colonies by ≥94% on the Comanche National Grassland and ≥58% on the Pawnee National Grassland. We present a ground-survey technique that involves 1) visiting on the ground a subset of aerial intercepts classified as occupied colonies plus a subset of intercepts classified as uninhabited colony sites, and 2) based on these ground observations, recording the proportion of each aerial intercept that intersects a colony and the proportion that intersects an uninhabited colony site. Where line-intercept techniques are applied to aerial surveys or remotely sensed imagery, this method can provide more accurate estimates of black-tailed prairie dog abundance and trends

Web-Based Surveys: Not Your Basic Survey Anymore

Science.gov (United States)

Bertot, John Carlo

2009-01-01

Web-based surveys are not new to the library environment. Although such surveys began as extensions of print surveys, the Web-based environment offers a number of approaches to conducting a survey that the print environment cannot duplicate easily. Since 1994, the author and others have conducted national surveys of public library Internet…

Geophex Airborne Unmanned Survey System

International Nuclear Information System (INIS)

Won, I.L.; Keiswetter, D.

1995-01-01

Ground-based surveys place personnel at risk due to the proximity of buried unexploded ordnance (UXO) items or by exposure to radioactive materials and hazardous chemicals. The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide stand-off capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected. The Geophex Airborne Unmanned Survey System (GAUSS) is designed to detect and locate small-scale anomalies at hazardous sites using magnetic and electromagnetic survey techniques. The system consists of a remotely-piloted, radio-controlled, model helicopter (RCH) with flight computer, light-weight geophysical sensors, an electronic positioning system, a data telemetry system, and a computer base-station. The report describes GAUSS and its test results

Geophex Airborne Unmanned Survey System

Energy Technology Data Exchange (ETDEWEB)

Won, I.L.; Keiswetter, D.

1995-12-31

Ground-based surveys place personnel at risk due to the proximity of buried unexploded ordnance (UXO) items or by exposure to radioactive materials and hazardous chemicals. The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide stand-off capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected. The Geophex Airborne Unmanned Survey System (GAUSS) is designed to detect and locate small-scale anomalies at hazardous sites using magnetic and electromagnetic survey techniques. The system consists of a remotely-piloted, radio-controlled, model helicopter (RCH) with flight computer, light-weight geophysical sensors, an electronic positioning system, a data telemetry system, and a computer base-station. The report describes GAUSS and its test results.

A SUCCESSFUL BROADBAND SURVEY FOR GIANT Ly{alpha} NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

Energy Technology Data Exchange (ETDEWEB)

Prescott, Moire K. M. [Department of Physics, Broida Hall, Mail Code 9530, University of California, Santa Barbara, CA 93106 (United States); Dey, Arjun; Jannuzi, Buell T., E-mail: mkpresco@physics.ucsb.edu [National Optical Astronomy Observatory, 950 North Cherry Avenue, Tucson, AZ 85719 (United States)

2012-04-01

Giant Ly{alpha} nebulae (or Ly{alpha} 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Ly{alpha} nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Ly{alpha} nebulae at 2 {approx}< z {approx}< 3 within deep broadband imaging and have carried out a survey of the 9.4 deg{sup 2} NOAO Deep Wide-Field Survey Booetes field. With a total survey comoving volume of Almost-Equal-To 10{sup 8} h{sup -3}{sub 70} Mpc{sup 3}, this is the largest volume survey for Ly{alpha} nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Ly{alpha} nebula.

A SUCCESSFUL BROADBAND SURVEY FOR GIANT Lyα NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

International Nuclear Information System (INIS)

Prescott, Moire K. M.; Dey, Arjun; Jannuzi, Buell T.

2012-01-01

Giant Lyα nebulae (or Lyα 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Lyα nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Lyα nebulae at 2 ∼ 2 NOAO Deep Wide-Field Survey Boötes field. With a total survey comoving volume of ≈10 8 h –3 70 Mpc 3 , this is the largest volume survey for Lyα nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Lyα nebula.

Alumni Perspectives Survey, 2010. Survey Report

Science.gov (United States)

Sheikh, Sabeen

2010-01-01

During the months of April and September of 2009, the Graduate Management Admission Council[R] (GMAC[R]) conducted the Alumni Perspectives Survey, a longitudinal study of prior respondents to the Global Management Education Graduate Survey of management students nearing graduation. A total of 3,708 alumni responded to the April 2009 survey,…

Knowledge based systems: A critical survey of major concepts, issues and techniques. Visuals

Science.gov (United States)

Dominick, Wayne D. (Editor); Kavi, Srinu

1984-01-01

This Working Paper Series entry represents a collection of presentation visuals associated with the companion report entitled, Knowledge Based Systems: A Critical Survey of Major Concepts, Issues, and Techniques, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-9. The objectives of the report are to: examine various techniques used to build the KBS; to examine at least one KBS in detail, i.e., a case study; to list and identify limitations and problems with the KBS; to suggest future areas of research; and to provide extensive reference materials.

Engineering surveying theory and examination problems for students

CERN Document Server

Schofield, W

2013-01-01

Engineering Surveying: Theory and Examination Problems for Students, Volume 1, Third Edition discusses topics concerning engineering surveying techniques and instrumentations. The book is comprised of eight chapters that cover several concerns in engineering survey. Chapter 1 discusses the basic concepts of surveying. Chapter 2 deals with simple and precise leveling, while Chapter 3 covers earthworks. The book also talks about the theodolite and its applications, and then discusses optical distance measurement. Curves, underground and hydrographic surveying, and aspects of dimensional control

Multiple Surveys of Students and Survey Fatigue

Science.gov (United States)

Porter, Stephen R.; Whitcomb, Michael E.; Weitzer, William H.

2004-01-01

This chapter reviews the literature on survey fatigue and summarizes a research project that indicates that administering multiple surveys in one academic year can significantly suppress response rates in later surveys. (Contains 4 tables.)

Using Electronic Surveys: Advice from Survey Professionals.

Directory of Open Access Journals (Sweden)

David M. Shannon

2002-01-01

Full Text Available The study reports the perceptions and recommendations of sixty-two experienced survey..researchers from the American Educational Research Association regarding the use of..electronic surveys. The most positive aspects cited for the use of electronic surveys were..reduction of costs (i.e., postage, phone charges, the use of electronic mail for pre-notification or..follow-up purposes, and the compatibility of data with existing software programs. These..professionals expressed limitations in using electronic surveys pertaining to the limited..sampling frame as well as issues of confidentiality, privacy, and the credibility of the sample...They advised that electronic surveys designed with the varied technological background and..capabilities of the respondent in mind, follow sound principles of survey construction, and be..administered to pre-notified, targeted populations with published email addresses.

Evaluating autonomous acoustic surveying techniques for rails in tidal marshes

Science.gov (United States)

Stiffler, Lydia L.; Anderson, James T.; Katzner, Todd

2018-01-01

There is a growing interest toward the use of autonomous recording units (ARUs) for acoustic surveying of secretive marsh bird populations. However, there is little information on how ARUs compare to human surveyors or how best to use ARU data that can be collected continuously throughout the day. We used ARUs to conduct 2 acoustic surveys for king (Rallus elegans) and clapper rails (R. crepitans) within a tidal marsh complex along the Pamunkey River, Virginia, USA, during May–July 2015. To determine the effectiveness of an ARU in replacing human personnel, we compared results of callback point‐count surveys with concurrent acoustic recordings and calculated estimates of detection probability for both rail species combined. The success of ARUs at detecting rails that human observers recorded decreased with distance (P ≤ 0.001), such that at 75 m, only 34.0% of human‐detected rails were detected by the ARU. To determine a subsampling scheme for continuous ARU data that allows for effective surveying of presence and call rates of rails, we used ARUs to conduct 15 continuous 48‐hr passive surveys, generating 720 hr of recordings. We established 5 subsampling periods of 5, 10, 15, 30, and 45 min to evaluate ARU‐based presence and vocalization detections of rails compared with each of the full 60‐min sampling of ARU‐based detection of rails. All subsampling periods resulted in different (P ≤ 0.001) detection rates and unstandardized vocalization rates compared with the hourly sampling period. However, standardized vocalization counts from the 30‐min subsampling period were not different from vocalization counts of the full hourly sampling period. When surveying rail species in estuarine environments, species‐, habitat‐, and ARU‐specific limitations to ARU sampling should be considered when making inferences about abundances and distributions from ARU data. 

Technical basis for tumbleweed survey requirements and disposal criteria

International Nuclear Information System (INIS)

J. D. Arana

2000-01-01

This technical basis document describes the technique for surveying potentially contaminated tumbleweeds in areas where the Environmental Restoration Contractor has jurisdiction and the disposal criteria based on these survey results. The report also discusses the statistical basis for surveys and the historical basis for the assumptions that are used to interpret the surveys

Technical Basis for Tumbleweed Survey Requirements and Disposal Criteria

International Nuclear Information System (INIS)

Arana, J.D.

2000-01-01

This technical basis document describes the technique for surveying potentially contaminated tumbleweeds in areas where the Environmental Restoration Contractor has jurisdiction and the disposal criteria based on these survey results. The report also discusses the statistical basis for surveys and the historical basis for the assumptions that are used to interpret the surveys

Designing and conducting survey research a comprehensive guide

CERN Document Server

Rea, Louis M

2014-01-01

The industry standard guide, updated with new ideas and SPSS analysis techniques Designing and Conducting Survey Research: A Comprehensive Guide Fourth Edition is the industry standard resource that covers all major components of the survey process, updated to include new data analysis techniques and SPSS procedures with sample data sets online. The book offers practical, actionable guidance on constructing the instrument, administrating the process, and analyzing and reporting the results, providing extensive examples and worksheets that demonstrate the appropriate use of survey and data tech

Recent high precision surveys at PEP

International Nuclear Information System (INIS)

Sah, R.C.

1980-12-01

The task of surveying and aligning the components of PEP has provided an opportunity to develop new instruments and techniques for the purpose of high precision surveys. The new instruments are quick and easy to use, and they automatically encode survey data and read them into the memory of an on-line computer. When measurements of several beam elements have been taken, the on-line computer analyzes the measured data, compares them with desired parameters, and calculates the required adjustments to beam element support stands

Medical Simulation Practices 2010 Survey Results

Science.gov (United States)

McCrindle, Jeffrey J.

2011-01-01

Medical Simulation Centers are an essential component of our learning infrastructure to prepare doctors and nurses for their careers. Unlike the military and aerospace simulation industry, very little has been published regarding the best practices currently in use within medical simulation centers. This survey attempts to provide insight into the current simulation practices at medical schools, hospitals, university nursing programs and community college nursing programs. Students within the MBA program at Saint Joseph's University conducted a survey of medical simulation practices during the summer 2010 semester. A total of 115 institutions responded to the survey. The survey resus discuss overall effectiveness of current simulation centers as well as the tools and techniques used to conduct the simulation activity

Trends in Orbital Decompression Techniques of Surveyed American Society of Ophthalmic Plastic and Reconstructive Surgery Members.

Science.gov (United States)

Reich, Shani S; Null, Robert C; Timoney, Peter J; Sokol, Jason A

To assess current members of the American Society of Ophthalmic Plastic and Reconstructive Surgery (ASOPRS) regarding preference in surgical techniques for orbital decompression in Graves' disease. A 10-question web-based, anonymous survey was distributed to oculoplastic surgeons utilizing the ASOPRS listserv. The questions addressed the number of years of experience performing orbital decompression surgery, preferred surgical techniques, and whether orbital decompression was performed in collaboration with an ENT surgeon. Ninety ASOPRS members participated in the study. Most that completed the survey have performed orbital decompression surgery for >15 years. The majority of responders preferred a combined approach of floor and medial wall decompression or balanced lateral and medial wall decompression; only a minority selected a technique limited to 1 wall. Those surgeons who perform fat decompression were more likely to operate in collaboration with ENT. Most surgeons rarely remove the orbital strut, citing risk of worsening diplopia or orbital dystopia except in cases of optic nerve compression or severe proptosis. The most common reason given for performing orbital decompression was exposure keratopathy. The majority of surgeons perform the surgery without ENT involvement, and number of years of experience did not correlate significantly with collaboration with ENT. The majority of surveyed ASOPRS surgeons prefer a combined wall approach over single wall approach to initial orbital decompression. Despite the technological advances made in the field of modern endoscopic surgery, no single approach has been adopted by the ASOPRS community as the gold standard.

Isotope techniques in a water survey

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-10-15

The circulation of water is one of the most interesting of natural phenomena. Exact knowledge of fluctuations in precipitation and other factors in water circulation is extremely important for areas which have a very limited water supply. The information about the circulation of water is also important for the disposal of radioactive wastes on land and in the sea. Before satisfactory methods of disposal can be devised, it is essential to know precisely whether and to what extent the wastes can be transferred from one place to another as a result of the circulation of water. One of the most efficient ways of gathering such information is to study the isotopic ratios of hydrogen and oxygen in water in different areas. Tritium can serve a s a tracer in the study of water circulation. A variety of information can be obtained by measurements of isotopic composition of water, e.g. the average age of the water molecule in a lake or age, size, storage time and flow rate of a groundwater body. The modern tools of hydrological research cannot be employed by every country, because measurements of the isotopic composition of water require great technical skill and scientific knowledge. Besides, interpretation of isotope data in terms of hydrology and climatology requires the knowledge of certain basic data for the whole world or at least for large areas. A more complete knowledge of the worldwide variations in the isotopic composition of water would greatly facilitate the interpretation of local conditions. Guided by these considerations, the International Atomic Energy Agency has decided to initiate a study to determine the world-wide distribution of hydrogen and oxygen isotopes in water. On the basis of this study, it will be possible to make available basic data for the use of any country that wishes to apply isotope techniques for hydrological and climatological research. Under this project, it is proposed to collect samples of rain, river and ocean water in different

Test description and preliminary pitot-pressure surveys for Langley Test Technique Demonstrator at Mach 6

Science.gov (United States)

Everhart, Joel L.; Ashby, George C., Jr.; Monta, William J.

1992-01-01

A propulsion/airframe integration experiment conducted in the NASA Langley 20-Inch Mach 6 Tunnel using a 16.8-in.-long version of the Langley Test Technique Demonstrator configuration with simulated scramjet propulsion is described. Schlieren and vapor screen visualization of the nozzle flow field is presented and correlated with pitot-pressure flow-field surveys. The data were obtained at nominal free-stream conditions of Re = 2.8 x 10 exp 6 and a nominal engine total pressure of 100 psia. It is concluded that pitot-pressure surveys coupled to schlieren and vapor-screen photographs, and oil flows have revealed flow features including vortices, free shear layers, and shock waves occurring in the model flow field.

Evaluating autonomous acoustic surveying techniques for rails in tidal marshes

Science.gov (United States)

Stiffler, Lydia L.; Anderson, James T.; Katzner, Todd

2018-01-01

There is a growing interest toward the use of autonomous recording units (ARUs) for acoustic surveying of secretive marsh bird populations. However, there is little information on how ARUs compare to human surveyors or how best to use ARU data that can be collected continuously throughout the day. We used ARUs to conduct 2 acoustic surveys for king (Rallus elegans) and clapper rails (R. crepitans) within a tidal marsh complex along the Pamunkey River, Virginia, USA, during May–July 2015. To determine the effectiveness of an ARU in replacing human personnel, we compared results of callback point‐count surveys with concurrent acoustic recordings and calculated estimates of detection probability for both rail species combined. The success of ARUs at detecting rails that human observers recorded decreased with distance (P ≤ 0.001), such that at of human‐recorded rails also were detected by the ARU, but at >75 m, only 34.0% of human‐detected rails were detected by the ARU. To determine a subsampling scheme for continuous ARU data that allows for effective surveying of presence and call rates of rails, we used ARUs to conduct 15 continuous 48‐hr passive surveys, generating 720 hr of recordings. We established 5 subsampling periods of 5, 10, 15, 30, and 45 min to evaluate ARU‐based presence and vocalization detections of rails compared with each of the full 60‐min sampling of ARU‐based detection of rails. All subsampling periods resulted in different (P ≤ 0.001) detection rates and unstandardized vocalization rates compared with the hourly sampling period. However, standardized vocalization counts from the 30‐min subsampling period were not different from vocalization counts of the full hourly sampling period. When surveying rail species in estuarine environments, species‐, habitat‐, and ARU‐specific limitations to ARU sampling should be considered when making inferences about abundances and distributions from ARU data. 

The History of Electromagnetic Induction Techniques in Soil Survey

Science.gov (United States)

Brevik, Eric C.; Doolittle, Jim

2014-05-01

Electromagnetic induction (EMI) has been used to characterize the spatial variability of soil properties since the late 1970s. Initially used to assess soil salinity, the use of EMI in soil studies has expanded to include: mapping soil types; characterizing soil water content and flow patterns; assessing variations in soil texture, compaction, organic matter content, and pH; and determining the depth to subsurface horizons, stratigraphic layers or bedrock, among other uses. In all cases the soil property being investigated must influence soil apparent electrical conductivity (ECa) either directly or indirectly for EMI techniques to be effective. An increasing number and diversity of EMI sensors have been developed in response to users' needs and the availability of allied technologies, which have greatly improved the functionality of these tools. EMI investigations provide several benefits for soil studies. The large amount of georeferenced data that can be rapidly and inexpensively collected with EMI provides more complete characterization of the spatial variations in soil properties than traditional sampling techniques. In addition, compared to traditional soil survey methods, EMI can more effectively characterize diffuse soil boundaries and identify included areas of dissimilar soils within mapped soil units, giving soil scientists greater confidence when collecting spatial soil information. EMI techniques do have limitations; results are site-specific and can vary depending on the complex interactions among multiple and variable soil properties. Despite this, EMI techniques are increasingly being used to investigate the spatial variability of soil properties at field and landscape scales.

Design of a statewide radiation survey

International Nuclear Information System (INIS)

Nagda, N.L.; Koontz, M.D.; Rector, H.E.; Nifong, G.D.

1989-01-01

The Florida Institute of Phosphate Research (FIPR) recently sponsored a statewide survey to identify all significant land areas in Florida where the state's environmental radiation rule should be applied. Under this rule, newly constructed buildings must be tested for radiation levels unless approved construction techniques are used. Two parallel surveys - a land-based survey and a population-based survey - were designed and conducted to address the objective. Each survey included measurements in more than 3000 residences throughout the state. Other information sources that existed at the outset of the study, such as geologic profiles mapped by previous investigators and terrestrial uranium levels characterized through aerial gamma radiation surveys, were also examined. Initial data analysis efforts focused on determining the extent of evidence of radon potential for each of 67 counties in the state. Within 18 countries that were determined to have definite evidence of elevated radon potential, more detailed spatial analyses were conducted to identify areas of which the rule should apply. A total of 74 quadrangles delineated by the U.S. Geological Survey, representing about 7% of those constituting the state, were identified as having elevated radon potential and being subject to the rule

Timing and technique impact the effectiveness of road-based, mobile acoustic surveys of bats.

Science.gov (United States)

D'Acunto, Laura E; Pauli, Benjamin P; Moy, Mikko; Johnson, Kiara; Abu-Omar, Jasmine; Zollner, Patrick A

2018-03-01

Mobile acoustic surveys are a common method of surveying bat communities. However, there is a paucity of empirical studies exploring different methods for conducting mobile road surveys of bats. During 2013, we conducted acoustic mobile surveys on three routes in north-central Indiana, U.S.A., using (1) a standard road survey, (2) a road survey where the vehicle stopped for 1 min at every half mile of the survey route (called a "start-stop method"), and (3) a road survey with an individual using a bicycle. Linear mixed models with multiple comparison procedures revealed that when all bat passes were analyzed, using a bike to conduct mobile surveys detected significantly more bat passes per unit time compared to other methods. However, incorporating genus-level comparisons revealed no advantage to using a bike over vehicle-based methods. We also found that survey method had a significant effect when analyses were limited to those bat passes that could be identified to genus, with the start-stop method generally detecting more identifiable passes than the standard protocol or bike survey. Additionally, we found that significantly more identifiable bat passes (particularly those of the Eptesicus and Lasiurus genera) were detected in surveys conducted immediately following sunset. As governing agencies, particularly in North America, implement vehicle-based bat monitoring programs, it is important for researchers to understand how variations on protocols influence the inference that can be gained from different monitoring schemes.

Literature survey of heat transfer enhancement techniques in refrigeration applications

Energy Technology Data Exchange (ETDEWEB)

Jensen, M.K.; Shome, B. [Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Mechanical Engineering, Aeronautical Engineering and Mechanics

1994-05-01

A survey has been performed of the technical and patent literature on enhanced heat transfer of refrigerants in pool boiling, forced convection evaporation, and condensation. Extensive bibliographies of the technical literature and patents are given. Many passive and active techniques were examined for pure refrigerants, refrigerant-oil mixtures, and refrigerant mixtures. The citations were categorized according to enhancement technique, heat transfer mode, and tube or shell side focus. The effects of the enhancement techniques relative to smooth and/or pure refrigerants were illustrated through the discussion of selected papers. Patented enhancement techniques also are discussed. Enhanced heat transfer has demonstrated significant improvements in performance in many refrigerant applications. However, refrigerant mixtures and refrigerant-oil mixtures have not been studied extensively; no research has been performed with enhanced refrigerant mixtures with oil. Most studies have been of the parametric type; there has been inadequate examination of the fundamental processes governing enhanced refrigerant heat transfer, but some modeling is being done and correlations developed. It is clear that an enhancement technique must be optimized for the refrigerant and operating condition. Fundamental processes governing the heat transfer must be examined if models for enhancement techniques are to be developed; these models could provide the method to optimize a surface. Refrigerant mixtures, with and without oil present, must be studied with enhancement devices; there is too little known to be able to estimate the effects of mixtures (particularly NARMs) with enhanced heat transfer. Other conclusions and recommendations are offered.

Statistical techniques applied to aerial radiometric surveys (STAARS): series introduction and the principal-components-analysis method

International Nuclear Information System (INIS)

Pirkle, F.L.

1981-04-01

STAARS is a new series which is being published to disseminate information concerning statistical procedures for interpreting aerial radiometric data. The application of a particular data interpretation technique to geologic understanding for delineating regions favorable to uranium deposition is the primary concern of STAARS. Statements concerning the utility of a technique on aerial reconnaissance data as well as detailed aerial survey data will be included

Supply chain simulation tools and techniques: a survey

NARCIS (Netherlands)

Kleijnen, J.P.C.

2005-01-01

The main contribution of this paper is twofold: it surveys different types of simulation for supply chain management; it discusses several methodological issues. These different types of simulation are spreadsheet simulation, system dynamics, discrete-event simulation and business games. Which

Survey of Water Chemistry and Corrosion of NPP

Energy Technology Data Exchange (ETDEWEB)

Jung, Ki Sok; Hong, Bong Geon

2008-06-15

Status of water chemistry of nuclear power plant and materials corrosion has been surveyed. For PWR, system chemistry of primary coolant and secondary coolant as well as the related corrosion of materials was surveyed. For BWR, system chemistry as whole has been surveyed with its accompanying corrosion problems. Radiolysis of coolant water and activation of corrosion products also was surveyed. Future NPP such as supercritical water cooled reactor and fusion reactor has also been surveyed for their water chemistry and corrosion problems. As a result, proposal for some research items has been suggested. Some related corrosion research techniques and electrochemical fundamentals are also presented.

Survey of Water Chemistry and Corrosion of NPP

International Nuclear Information System (INIS)

Jung, Ki Sok; Hong, Bong Geon

2008-06-01

Status of water chemistry of nuclear power plant and materials corrosion has been surveyed. For PWR, system chemistry of primary coolant and secondary coolant as well as the related corrosion of materials was surveyed. For BWR, system chemistry as whole has been surveyed with its accompanying corrosion problems. Radiolysis of coolant water and activation of corrosion products also was surveyed. Future NPP such as supercritical water cooled reactor and fusion reactor has also been surveyed for their water chemistry and corrosion problems. As a result, proposal for some research items has been suggested. Some related corrosion research techniques and electrochemical fundamentals are also presented

Annual Omnibus Survey: A survey of life in Qatar 2014

OpenAIRE

Diop, Abdoulaye; Gengler, Justin John; Khan, Mohammad N.; Traugott, Michael; Elawad, Elmogiera Fadlallh; Al Ansari, Majed; Le, Kien T.; El-Maghraby, Engi; Elkassem, Rima Charbaji; Qutteina, Yara; Al Khulaifi, Buthaina; Nasrallah, Catherine; Al Subaey, Mohammed; Mustafa, Semsia Al-Ali; Alqassass, Haneen

2015-01-01

This Executive Summary presents the highlights of the 2014 Omnibus survey, the fourth in a series of Omnibus surveys since 2010. The surveys were carried out by the Social and Economic Survey Research Institute (SESRI) of Qatar University. Each Omnibus survey interviews a large and representative sample of Qatari citizens, resident expatriates and laborers. In these surveys, we asked a number of questions covering several topics of importance to Qatari society, including their ...

Use of cognitive interview techniques in the development of nutrition surveys and interactive nutrition messages for low-income populations.

Science.gov (United States)

Carbone, Elena T; Campbell, Marci K; Honess-Morreale, Lauren

2002-05-01

The effectiveness of dietary surveys and educational messages is dependent in part on how well the target audience's information processing needs and abilities are addressed. Use of pilot testing is helpful; however, problems with wording and language are often not revealed. Cognitive interview techniques offer 1 approach to assist dietitians in understanding how audiences process information. With this method, respondents are led through a survey or message and asked to paraphrase items; discuss thoughts, feelings, and ideas that come to mind; and suggest alternative wording. As part of a US Department of Agriculture-funded nutrition education project, 23 cognitive interviews were conducted among technical community college students in North Carolina. Interview findings informed the development of tailored computer messages and survey questions. Better understanding of respondents' cognitive processes significantly improved the language and approach used in this intervention. Interview data indicated 4 problem areas: vague or ineffective instructions, confusing questions and response options, variable interpretation of terms, and misinterpretation of dietary recommendations. Interviews also provided insight into the meaning of diet-related stages of change. These findings concur with previous research suggesting that cognitive interview techniques are a valuable tool in the formative evaluation and development of nutrition surveys and materials.

Arduino based radiation survey meter

International Nuclear Information System (INIS)

Rahman, Nur Aira Abd; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee; Muzakkir, Amir

2016-01-01

This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr −1 ). Conversion factor (CF) value for conversion of CPM to μSvhr −1 determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr

EBR Strengthening Technique for Concrete, Long-Term Behaviour and Historical Survey

Directory of Open Access Journals (Sweden)

Christoph Czaderski

2018-01-01

Full Text Available Epoxy bonded steel plates (externally bonded reinforcemen: EBR for the strengthening of concrete structures were introduced to the construction industry in the late 1960s, and the use of fibre reinforced polymers (FRPs was introduced in the 1990s, which means that these techniques have already been used in construction for 50 and 25 years, respectively. In the first part of the paper, a historical survey of the development and introduction of these strengthening techniques into the construction industry are presented. The monitoring of such applications in construction is very important and gives more confidence to this strengthening technique. Therefore, in the second part of the paper, two long-term monitoring campaigns over an extraordinarily long duration will be presented. Firstly, a 47-year monitoring campaign on a concrete beam with an epoxy bonded steel plate and, secondly, a 20-year monitoring campaign on a road bridge with epoxy bonded CFRP (carbon fibre reinforced polymers strips are described. The paper is an expanded version of the paper presented at the SMAR2017 Conference.

Cluster cosmology with next-generation surveys.

Science.gov (United States)

Ascaso, B.

2017-03-01

The advent of next-generation surveys will provide a large number of cluster detections that will serve the basis for constraining cos mological parameters using cluster counts. The main two observational ingredients needed are the cluster selection function and the calibration of the mass-observable relation. In this talk, we present the methodology designed to obtain robust predictions of both ingredients based on realistic cosmological simulations mimicking the following next-generation surveys: J-PAS, LSST and Euclid. We display recent results on the selection functions for these mentioned surveys together with others coming from other next-generation surveys such as eROSITA, ACTpol and SPTpol. We notice that the optical and IR surveys will reach the lowest masses between 0.3technique that we are developing to perform a Fisher Matrix analysis to provide cosmological constraints for the considered next-generation surveys and introduce very preliminary results.

A survey of temperature measurement

International Nuclear Information System (INIS)

Saltvold, J.R.

1976-03-01

Many different techniques for measuring temperature have been surveyed and are discussed. The concept of temperature and the physical phenomena used in temperature measurement are also discussed. Extensive tables are presented in which the range and accuracy of the various techniques and other related data are included. (author)

What Are Probability Surveys used by the National Aquatic Resource Surveys?

Science.gov (United States)

The National Aquatic Resource Surveys (NARS) use probability-survey designs to assess the condition of the nation’s waters. In probability surveys (also known as sample-surveys or statistical surveys), sampling sites are selected randomly.

Survey research.

Science.gov (United States)

Alderman, Amy K; Salem, Barbara

2010-10-01

Survey research is a unique methodology that can provide insight into individuals' perspectives and experiences and can be collected on a large population-based sample. Specifically, in plastic surgery, survey research can provide patients and providers with accurate and reproducible information to assist with medical decision-making. When using survey methods in research, researchers should develop a conceptual model that explains the relationships of the independent and dependent variables. The items of the survey are of primary importance. Collected data are only useful if they accurately measure the concepts of interest. In addition, administration of the survey must follow basic principles to ensure an adequate response rate and representation of the intended target sample. In this article, the authors review some general concepts important for successful survey research and discuss the many advantages this methodology has for obtaining limitless amounts of valuable information.

SELF-ASSEMBLED ROV AND PHOTOGRAMMETRIC SURVEYS WITH LOW COST TECHNIQUES

Directory of Open Access Journals (Sweden)

E. Costa

2018-05-01

Full Text Available In last years, ROVs, have been employed to explore underwater environments and have played an important role for documentation and surveys in different fields of scientific application. In 2017, the Laboratorio di Fotogrammetria of Iuav University of Venice has decided to buy an OpenRov, a low cost ROV that could be assembled by ourselves to add some external components for our necessities, to document archaeological sites. The paper is related to the photogrammetric survey for the documentation of underwater environments and to the comparison between different solutions applied on a case studio, five marble columns on a sandy bottom at 5 meters deep. On the lateral sides of the ROV, we have applied two GoPro Hero4 Session, which have documented the items both with a series of images and with a video. The geometric accuracy of the obtained 3D model has been evaluated through comparison with a photogrammetric model realized with a professional reflex camera, Nikon D610. Some targets have been topographically surveyed with a trilateration and have been used to connected in the same reference system the different models, allowing the comparisons of the point clouds. Remote Operating Vehicles offer not only safety for their operators, but are also a relatively low cost alternative. The employment of a low-cost vehicle adapted to the necessities of surveys support a request for safer, cheaper and efficient methods for exploring underwater environments.

Advancing US GHG Inventory by Incorporating Survey Data using Machine-Learning Techniques

Science.gov (United States)

Alsaker, C.; Ogle, S. M.; Breidt, J.

2017-12-01

Crop management data are used in the National Greenhouse Gas Inventory that is compiled annually and reported to the United Nations Framework Convention on Climate Change. Emissions for carbon stock change and N2O emissions for US agricultural soils are estimated using the USDA National Resources Inventory (NRI). NRI provides basic information on land use and cropping histories, but it does not provide much detail on other management practices. In contrast, the Conservation Effects Assessment Project (CEAP) survey collects detailed crop management data that could be used in the GHG Inventory. The survey data were collected from NRI survey locations that are a subset of the NRI every 10 years. Therefore, imputation of the CEAP are needed to represent the management practices across all NRI survey locations both spatially and temporally. Predictive mean matching and an artificial neural network methods have been applied to develop imputation model under a multiple imputation framework. Temporal imputation involves adjusting the imputation model using state-level USDA Agricultural Resource Management Survey data. Distributional and predictive accuracy is assessed for the imputed data, providing not only management data needed for the inventory but also rigorous estimates of uncertainty.

Arduino based radiation survey meter

Energy Technology Data Exchange (ETDEWEB)

Rahman, Nur Aira Abd, E-mail: nur-aira@nm.gov.my; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee [Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Muzakkir, Amir [Sinaran Utama Teknologi Sdn Bhd, 43650, Bandar Baru Bangi, Selangor (Malaysia)

2016-01-22

This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr{sup −1}). Conversion factor (CF) value for conversion of CPM to μSvhr{sup −1} determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr.

A two-phase sampling survey for nonresponse and its paradata to correct nonresponse bias in a health surveillance survey.

Science.gov (United States)

Santin, G; Bénézet, L; Geoffroy-Perez, B; Bouyer, J; Guéguen, A

2017-02-01

The decline in participation rates in surveys, including epidemiological surveillance surveys, has become a real concern since it may increase nonresponse bias. The aim of this study is to estimate the contribution of a complementary survey among a subsample of nonrespondents, and the additional contribution of paradata in correcting for nonresponse bias in an occupational health surveillance survey. In 2010, 10,000 workers were randomly selected and sent a postal questionnaire. Sociodemographic data were available for the whole sample. After data collection of the questionnaires, a complementary survey among a random subsample of 500 nonrespondents was performed using a questionnaire administered by an interviewer. Paradata were collected for the complete subsample of the complementary survey. Nonresponse bias in the initial sample and in the combined samples were assessed using variables from administrative databases available for the whole sample, not subject to differential measurement errors. Corrected prevalences by reweighting technique were estimated by first using the initial survey alone and then the initial and complementary surveys combined, under several assumptions regarding the missing data process. Results were compared by computing relative errors. The response rates of the initial and complementary surveys were 23.6% and 62.6%, respectively. For the initial and the combined surveys, the relative errors decreased after correction for nonresponse on sociodemographic variables. For the combined surveys without paradata, relative errors decreased compared with the initial survey. The contribution of the paradata was weak. When a complex descriptive survey has a low response rate, a short complementary survey among nonrespondents with a protocol which aims to maximize the response rates, is useful. The contribution of sociodemographic variables in correcting for nonresponse bias is important whereas the additional contribution of paradata in

77 FR 49721 - International Services Surveys and Direct Investment Surveys Reporting

Science.gov (United States)

2012-08-17

.... See, e.g., Direct Investment Surveys: BE-12, Benchmark Survey of Foreign Direct Investment in the...] RIN 0691-AA81 International Services Surveys and Direct Investment Surveys Reporting AGENCY: Bureau of... BEA will follow to collect data on international trade in services and direct investment surveys. The...

TESTING GROUND BASED GEOPHYSICAL TECHNIQUES TO REFINE ELECTROMAGNETIC SURVEYS NORTH OF THE 300 AREA, HANFORD, WASHINGTON

International Nuclear Information System (INIS)

Petersen, S.W.

2010-01-01

Airborne electromagnetic (AEM) surveys were flown during fiscal year (FY) 2008 within the 600 Area in an attempt to characterize the underlying subsurface and to aid in the closure and remediation design study goals for the 200-PO-1 Groundwater Operable Unit (OU). The rationale for using the AEM surveys was that airborne surveys can cover large areas rapidly at relatively low costs with minimal cultural impact, and observed geo-electrical anomalies could be correlated with important subsurface geologic and hydrogeologic features. Initial interpretation of the AEM surveys indicated a tenuous correlation with the underlying geology, from which several anomalous zones likely associated with channels/erosional features incised into the Ringold units were identified near the River Corridor. Preliminary modeling resulted in a slightly improved correlation but revealed that more information was required to constrain the modeling (SGW-39674, Airborne Electromagnetic Survey Report, 200-PO-1 Groundwater Operable Unit, 600 Area, Hanford Site). Both time-and frequency domain AEM surveys were collected with the densest coverage occurring adjacent to the Columbia River Corridor. Time domain surveys targeted deeper subsurface features (e.g., top-of-basalt) and were acquired using the HeliGEOTEM(reg s ign) system along north-south flight lines with a nominal 400 m (1,312 ft) spacing. The frequency domain RESOLVE system acquired electromagnetic (EM) data along tighter spaced (100 m (328 ft) and 200 m (656 ft)) north-south profiles in the eastern fifth of the 200-PO-1 Groundwater OU (immediately adjacent to the River Corridor). The overall goal of this study is to provide further quantification of the AEM survey results, using ground based geophysical methods, and to link results to the underlying geology and/or hydrogeology. Specific goals of this project are as follows: (1) Test ground based geophysical techniques for the efficacy in delineating underlying geology; (2) Use ground

TESTING GROUND BASED GEOPHYSICAL TECHNIQUES TO REFINE ELECTROMAGNETIC SURVEYS NORTH OF THE 300 AREA HANFORD WASHINGTON

Energy Technology Data Exchange (ETDEWEB)

PETERSEN SW

2010-12-02

Airborne electromagnetic (AEM) surveys were flown during fiscal year (FY) 2008 within the 600 Area in an attempt to characterize the underlying subsurface and to aid in the closure and remediation design study goals for the 200-PO-1 Groundwater Operable Unit (OU). The rationale for using the AEM surveys was that airborne surveys can cover large areas rapidly at relatively low costs with minimal cultural impact, and observed geo-electrical anomalies could be correlated with important subsurface geologic and hydrogeologic features. Initial interpretation of the AEM surveys indicated a tenuous correlation with the underlying geology, from which several anomalous zones likely associated with channels/erosional features incised into the Ringold units were identified near the River Corridor. Preliminary modeling resulted in a slightly improved correlation but revealed that more information was required to constrain the modeling (SGW-39674, Airborne Electromagnetic Survey Report, 200-PO-1 Groundwater Operable Unit, 600 Area, Hanford Site). Both time-and frequency domain AEM surveys were collected with the densest coverage occurring adjacent to the Columbia River Corridor. Time domain surveys targeted deeper subsurface features (e.g., top-of-basalt) and were acquired using the HeliGEOTEM{reg_sign} system along north-south flight lines with a nominal 400 m (1,312 ft) spacing. The frequency domain RESOLVE system acquired electromagnetic (EM) data along tighter spaced (100 m [328 ft] and 200 m [656 ft]) north-south profiles in the eastern fifth of the 200-PO-1 Groundwater OU (immediately adjacent to the River Corridor). The overall goal of this study is to provide further quantification of the AEM survey results, using ground based geophysical methods, and to link results to the underlying geology and/or hydrogeology. Specific goals of this project are as follows: (1) Test ground based geophysical techniques for the efficacy in delineating underlying geology; (2) Use ground

The survey of the Omagari fault using electric survey

International Nuclear Information System (INIS)

Matsuo, Koichi; Kishimoto, Munemaru; Negi, Tateyuki; Teshima, Minoru

2005-08-01

The present document is to report the results of geophysical survey by electric survey around a site proposed for the Horonobe Underground Research Program at Horonobe-cho, Hokkaido by the Japan Nuclear Cycle Development Institute. Electric survey using dipole-dipole array was carried out at 2,061 points using 101 electrodes over 1 km survey line in the area of Hokushin in Horonobe-cho near presumed Omagari-fault. Two dimensional resistivity inversion analysis was carried out and the resistivity structure from the surface to 250 m below sea level became clear. The resistivity structure was studied by comparing structure presumed from existing geological and geophysical informations. Resistivity distribution near surface was about 100 ohm-m and it became from 10 to 2 ohm-m as the depth increasing. Resistivity near presumed Omagari-fault was relatively lower than around that fault. Resistivity distribution was good agreement with two dimensional resistivity structure perfumed by AMT survey (2003) and existing electrical resistivity log data. Resistivity distribution of shallow zone at survey area was clear because the density of survey points were very high. (author)

Research on polonium-218 survey technique for uranium

International Nuclear Information System (INIS)

Zhou, R.

1985-01-01

This article makes an exposition of the principles and procedures of 218 Po survey technique for uranium. The experiments done with 218 Po method on a large scale on the deposits of granite, volcanic rock and carbon-silliceous slate types showed that the method of not only as effective as track method and 210 Po method, but also has the characteristics of its own. The device has higher working efficiency with only 5 minutes needed at each measurement point, and its sensitivity is higher, about 0.7 pulse/136.S (P ci /L). The results of measurement by 218 Po method will not be affected by thorium emanation and there will be no contamination of the scintillation chamber by radon daughter. The ratio of anomalous peak value to the bottom for 218 Po method is proved to be higher than that for track method and 210 Po method. In order to avoid the influence of moisture, the measurement by 218 Po method should be planned to do when it is not a rainy day and the holes must be dug some distance off the ditches and rice fields, thus ensuring the success in applying the method

Survey of the ATLAS Pixel Detector Components

International Nuclear Information System (INIS)

Andreazza, A.; Kostyukhim, V.; Madaras, R.

2008-01-01

This document provides a description of the survey performed on different components of the ATLAS Pixel Detector at different stages of its assembly. During the production of the ATLAS pixel detector great care was put in the geometrical survey of the location of the sensitive area of modules. This had a double purpose: (1) to provide a check of the quality of the assembly procedure and assure tolerances in the geometrical assembly were met; and (2) to provide an initial point for the alignment (the so called 'as-built detector'), better than the ideal geometry. Since direct access to the sensitive area becomes more and more difficult with the progress of the assembly, the survey needed to be performed at different stages: after module loading on the local supports (sectors and staves) and after assembly of the local supports in disks or halfshells. Different techniques were used, including both optical 2D and 3D surveys and mechanical survey. This document summarizes the survey procedures, the analysis done on the collected data and how survey data are stored in case they will need to be accessed in the future

Reconstructive techniques in transoral robotic surgery for head and neck cancer: a North American survey.

Science.gov (United States)

Konofaos, Petros; Hammond, Sarah; Ver Halen, Jon P; Samant, Sandeep

2013-02-01

Although the use of transoral robotic surgery for tumor extirpation is expanding, little is known about national trends in the reconstruction of resultant defects. An 18-question electronic survey was created by an expert panel of surgeons from the Department of Otolaryngology-Head and Neck Surgery and the Department of Plastic and Reconstructive Surgery at the University of Tennessee. Eligible participants were identified by the American Head and Neck Society Web site and from the Intuitive Surgical, Inc., Web site after review of surgeons trained in transoral robotic surgery techniques. Twenty-three of 27 preselected head and neck surgeons (85.18 percent) completed the survey. All respondents use transoral robotic surgery for head and neck tumor extirpation. The majority of the respondents [n = 17 (77.3 percent)] did not use any means of reconstruction. With respect to methods of reconstruction following transoral robotic surgery defects, the majority [n = 4 (80.0 percent)] used a free flap, a pedicled local flap [n = 3 (60.0 percent)], or a distant flap [n = 3 (60.0 percent)]. The radial forearm flap was the most commonly used free flap by all respondents. In general, the majority of survey respondents allow defects to heal secondarily or close primarily. Based on this survey, consensus indications for pedicled or free tissue transfer following transoral robotic surgery defects were primary head and neck tumors (stage T3 and T4a), pharyngeal defects with exposure of vital structures, and prior irradiation or chemoradiation to the operative site and neck.

The Hannibal Community Survey; A Case Study in a Community Development Technique.

Science.gov (United States)

Croll, John A.

Disturbed by the community's negative attitude toward its prospects for progress, the Hannibal (Missouri) Chamber of Commerce initiated a community self-survey to improve the situation. The questionnaire survey concentrated on felt needs relationg to city government, retail facilities and services, recreation, religion, education, industrial…

Vertical Cable Seismic Survey for Hydrothermal Deposit

Science.gov (United States)

Asakawa, E.; Murakami, F.; Sekino, Y.; Okamoto, T.; Ishikawa, K.; Tsukahara, H.; Shimura, T.

2012-04-01

The vertical cable seismic is one of the reflection seismic methods. It uses hydrophone arrays vertically moored from the seafloor to record acoustic waves generated by surface, deep-towed or ocean bottom sources. Analyzing the reflections from the sub-seabed, we could look into the subsurface structure. This type of survey is generally called VCS (Vertical Cable Seismic). Because VCS is an efficient high-resolution 3D seismic survey method for a spatially-bounded area, we proposed the method for the hydrothermal deposit survey tool development program that the Ministry of Education, Culture, Sports, Science and Technology (MEXT) started in 2009. We are now developing a VCS system, including not only data acquisition hardware but data processing and analysis technique. Our first experiment of VCS surveys has been carried out in Lake Biwa, JAPAN in November 2009 for a feasibility study. Prestack depth migration is applied to the 3D VCS data to obtain a high quality 3D depth volume. Based on the results from the feasibility study, we have developed two autonomous recording VCS systems. After we carried out a trial experiment in the actual ocean at a water depth of about 400m and we carried out the second VCS survey at Iheya Knoll with a deep-towed source. In this survey, we could establish the procedures for the deployment/recovery of the system and could examine the locations and the fluctuations of the vertical cables at a water depth of around 1000m. The acquired VCS data clearly shows the reflections from the sub-seafloor. Through the experiment, we could confirm that our VCS system works well even in the severe circumstances around the locations of seafloor hydrothermal deposits. We have, however, also confirmed that the uncertainty in the locations of the source and of the hydrophones could lower the quality of subsurface image. It is, therefore, strongly necessary to develop a total survey system that assures a accurate positioning and a deployment techniques

MCNP Techniques for Modeling Sodium Iodide Spectra of Kiwi Surveys

International Nuclear Information System (INIS)

Robert B Hayes

2007-01-01

This work demonstrates how MCNP can be used to predict the response of mobile search and survey equipment from base principles. The instrumentation evaluated comes from the U.S. Department of Energy's Aerial Measurement Systems. Through reconstructing detector responses to various point-source measurements, detector responses to distributed sources can be estimated through superposition. Use of this methodology for currently deployed systems allows predictive determinations of activity levels and distributions for common configurations of interest. This work helps determine the quality and efficacy of certain surveys in fully characterizing an effected site following a radiological event of national interest

Searching for millisecond pulsars: surveys, techniques and prospects

International Nuclear Information System (INIS)

Stovall, K; Lorimer, D R; Lynch, R S

2013-01-01

Searches for millisecond pulsars (which we here loosely define as those with periods < 20 ms) in the galactic field have undergone a renaissance in the past five years. New or recently refurbished radio telescopes utilizing cooled receivers and state-of-the art digital data acquisition systems are carrying out surveys of the entire sky at a variety of radio frequencies. Targeted searches for millisecond pulsars in point sources identified by the Fermi Gamma-ray Space Telescope have proved phenomenally successful, with over 50 discoveries in the past five years. The current sample of millisecond pulsars now numbers almost 200 and, for the first time in 25 years, now outnumbers their counterparts in galactic globular clusters. While many of these searches are motivated to find pulsars which form part of pulsar timing arrays, a wide variety of interesting systems are now being found. Following a brief overview of the millisecond pulsar phenomenon, we describe these searches and present some of the highlights of the new discoveries in the past decade. We conclude with predictions and prospects for ongoing and future surveys. (paper)

A Subaru galaxy redshift survey: WFMOS survey

International Nuclear Information System (INIS)

Takada, M

2008-01-01

A planned galaxy redshift survey with the Subaru 8.2m telescope, the WFMOS survey, offers a unique opportunity for probing detailed properties of large-scale structure formation in the expanding universe by measuring clustering strength of galaxy distribution as a function of distance scale and redshift. In particular, the precise measurement of the galaxy power spectrum, combined with the cosmic microwave background experiments, allows us to obtain stringent constraints on or even determine absolute mass scales of the Big-Bang relic neutrinos as the neutrinos imprint characteristic scale- and redshift-dependent modifications onto the galaxy power spectrum shape. Here we describe the basic concept of how the galaxy clustering measurement can be used to explore the neutrino masses, with particular emphasis on advantages of the WFMOS survey over the existing low-redshift surveys such as SDSS

System reliability worth assessment at a midwest utility-survey results for residential customers

Energy Technology Data Exchange (ETDEWEB)

Chowdhury, A.A.; Mielnik, T.C. [Electric System Planning, MidAmerican Energy Company, Davenport, Iowa (United States); Lawton, L.E.; Sullivan, M.J.; Katz, A. [Population Research Systems, San Francisco, CA (United States)

2005-12-01

This paper presents the overall results of a residential customer survey conducted in service areas of MidAmerican Energy Company, a Midwest utility. A similar survey was conducted concurrently in the industrial, commercial and institutional sectors and the survey results are presented in a companion paper. The results of this study are compared with the results of other studies performed in the high cost areas of the US east and west coasts. This is the first ever study of this nature performed for the residential customers in the US Midwest region. Methodological differences in the study design compared to coastal surveys are discussed. Customer survey costing techniques can be categorized into three main groups: contingent valuation techniques, direct costing techniques and indirect costing techniques. Most customer surveys conducted by different organizations in the last two decades used a combination of all three techniques. The selection of a technique is mainly dependent on the type of customer being surveyed. In this MidAmerican study, contingent valuation techniques and an indirect costing technique have been used, as most consequences of power outages to residential users are related to inconvenience or disruption of housekeeping and leisure activities that are intangible in nature. The major contribution of this paper is that particulars of Midwest residential customers compared to residential customers of coastal utilities are noted and customer responses on power quality issues that are important to customers are summarized. (author)

Survey of Analysis of Crime Detection Techniques Using Data Mining and Machine Learning

Science.gov (United States)

Prabakaran, S.; Mitra, Shilpa

2018-04-01

Data mining is the field containing procedures for finding designs or patterns in a huge dataset, it includes strategies at the convergence of machine learning and database framework. It can be applied to various fields like future healthcare, market basket analysis, education, manufacturing engineering, crime investigation etc. Among these, crime investigation is an interesting application to process crime characteristics to help the society for a better living. This paper survey various data mining techniques used in this domain. This study may be helpful in designing new strategies for crime prediction and analysis.

Survey of subsurface geophysical exploration technologies adaptable to an airborne platform

International Nuclear Information System (INIS)

Taylor, K.A.

1992-12-01

This report has been prepared by the US Department of Energy (DOE) as part of a Research Development Demonstration Testing and Evaluation (RDDT ampersand E) project by EG ampersand G Energy Measurement's (EG ampersand G/EM) Remote Sensing Laboratory. It examines geophysical detection techniques which may be used in Environmental Restoration/Waste Management (ER/WM) surveys to locate buried waste, waste containers, potential waste migratory paths, and aquifer depths. Because of the Remote Sensing Laboratory's unique survey capabilities, only those technologies which have been adapted or are capable of being adapted to an airborne platform were studied. This survey describes several of the available subsurface survey technologies and discusses the basic capabilities of each: the target detectability, required geologic conditions, and associated survey methods. Because the airborne capabilities of these survey techniques have not been fully developed, the chapters deal mostly with the ground-based capabilities of each of the technologies, with reference made to the airborne capabilities where applicable. The information about each survey technique came from various contractors whose companies employ these specific technologies. EG ampersand G/EM cannot guarantee or verify the accuracy of the contractor information; however, the data given is an indication of the technologies that are available

The role and importance of victim surveys in criminal research

OpenAIRE

Ahmet Polat; Serdar Kenan Gül

2010-01-01

Due to increasing crime rates, insufficient policies and the limitations of the official statistics, victim surveys are being used as an alternative crime measurement technique. These types of surveys are inspired most of the criminological theories and regarded as a data source especially in shaping the crime policies of the Anglo-Saxon countries. Even though they have developed over time, victim surveys have limitations which create an obstacle in measuring crime. However, these surveys cou...

Thermographic survey of two rural buildings in Spain

Energy Technology Data Exchange (ETDEWEB)

Martin Ocana, S.; Canas Guerrero, I. [Departamento de Construccion y Vias Rurales, Escuela Tecnica Superior de Ingenieros Agronomos, Universidad Politecnica de Madrid, Madrid (Spain); Gonzalez Requena, I. [Departamento de Materiales y Produccion Aeroespacial, Escuela Tecnica Superior de Ingenieros Aeronauticos, Universidad Politecnica de Madrid, Madrid (Spain)

2004-07-01

Two common housing prototypes of existing buildings in Spanish rural areas were surveyed by infrared inspection. The aim of the study is to assess the usefulness of infrared thermography as a technique for the detection of the thermal performance of rural buildings. For the traditional house the best results were obtained in the thermographic survey carried out in the evening. Contrarily, for the modern house the thermographic survey at daybreak provided more information. Infrared thermography allowed the comparison of the thermal performance of two buildings. (author)

77 FR 772 - International Services Surveys and Direct Investment Surveys Reporting

Science.gov (United States)

2012-01-06

... and publish in the Federal Register notices of future surveys of foreign and direct investment in the....: 111012619-1619-01] RIN 0691-AA81 International Services Surveys and Direct Investment Surveys Reporting... international trade in services and direct investment surveys provided for by the International Investment and...

The Winfrith district gamma survey

International Nuclear Information System (INIS)

Cavell, I.W.; Peabody, C.O.

1961-09-01

This report describes the District Gamma Survey carried out around the A.E.E., Winfrith since June, 1959. Its organisation, equipment and techniques are described, and the results obtained up to the 31st December, 1960 are given. (author)

Position fixing and surveying techniques for marine archaeological studies

Digital Repository Service at National Institute of Oceanography (India)

Ganesan, P.

. This technical report is going to be of great help to marine archaeologists, who wants to know the capabilities of some of the most common available tools for position fixing, their accuracies and method of surveying, which in turn will help in selecting...

Aerial radiation surveys

International Nuclear Information System (INIS)

Jobst, J.

1980-01-01

A recent aerial radiation survey of the surroundings of the Vitro mill in Salt Lake City shows that uranium mill tailings have been removed to many locations outside their original boundary. To date, 52 remote sites have been discovered within a 100 square kilometer aerial survey perimeter surrounding the mill; 9 of these were discovered with the recent aerial survey map. Five additional sites, also discovered by aerial survey, contained uranium ore, milling equipment, or radioactive slag. Because of the success of this survey, plans are being made to extend the aerial survey program to other parts of the Salt Lake valley where diversions of Vitro tailings are also known to exist

Coral reef surveys in India

Digital Repository Service at National Institute of Oceanography (India)

Wafar, M.V.M.

and in persuading the Government agencies to take protective and conservational measures. The current approach is towards establishing a monitoring design to detect changes in reef ecology in the long-term, and to standardize the survey techniques to be compatible...

Application of ranging technique of radar level meter for draft survey

Directory of Open Access Journals (Sweden)

SHEN Yijun

2017-12-01

Full Text Available [Objectives] This paper aims to solve the problems of the high subjectivity and low accuracy and efficiency of draft surveying relying on human visual inspection.[Methods] Radar-level oil and liquid measurement technology products are widely used in the petrochemical industry. A device is developed that uses radar to survey the draft of a boat, designed with data series optimization formulae to ensure that the data results are true and correct. At the same time, a test is designed to prove the accuracy of the results.[Results] According to the conditions of the ship,the device is composed of a radar sensor, triangular bracket and display,and is put to use in the test.[Conclusions] With 15 vessels as the research objects,the comparison experiment shows a difference in range between 0.001-0.022 meters, with an average difference rate of 0.028%, which meets the requirements for ship draft survey accuracy.

Practical boundary surveying legal and technical principles

CERN Document Server

Gay, Paul

2015-01-01

This guide to boundary surveying provides landowners, land surveyors, students and others with the necessary foundation to understand boundary surveying techniques and the common legal issues that govern boundary establishment.  Boundary surveying is sometimes mistakenly considered a strictly technical discipline with simple and straightforward technical solutions.  In reality, boundary establishment is often a difficult and complex matter, requiring years of experience and a thorough understanding of boundary law.  This book helps readers to understand the challenges often encountered by boundary surveyors and some of the available solutions. Using only simple and logically explained mathematics, the principles and practice of boundary surveying are demystified for those without prior experience, and the focused coverage of pivotal issues such as easements and setting lot corners will aid even licensed practitioners in untangling thorny cases. Practical advice on using both basic and advanced instruments ...

A Survey of Privacy on Data Integration

OpenAIRE

Do Son, Thanh

2015-01-01

This survey is an integrated view of other surveys on privacy preserving for data integration. First, we review the database context and challenges and research questions. Second, we formulate the privacy problems for schema matching and data matching. Next, we introduce the elements of privacy models. Then, we summarize the existing privacy techniques and the analysis (proofs) of privacy guarantees. Finally, we describe the privacy frameworks and their applications.

A survey of intrusion detection techniques in Cloud

OpenAIRE

Modi, C.; Patel, D.; Patel, H.; Borisaniya, B.; Patel, A.; Rajarajan, M.

2013-01-01

Cloud computing provides scalable, virtualized on-demand services to the end users with greater flexibility and lesser infrastructural investment. These services are provided over the Internet using known networking protocols, standards and formats under the supervision of different managements. Existing bugs and vulnerabilities in underlying technologies and legacy protocols tend to open doors for intrusion. This paper, surveys different intrusions affecting availability, confidentiality and...

Geological survey by high resolution electrical survey on granite areas

International Nuclear Information System (INIS)

Sugimoto, Yoshihiro; Yamada, Naoyuki

2002-03-01

As an Integral part of the geological survey in 'The study of the regions ground water flow system' that we are carrying out with Tono Geoscience Center, we proved the relation between the uncontinuation structure such as lineament in the base rock and resistivity structure (resistivity distribution), for the purpose of that confirms the efficacy of the high resolution electrical survey as geological survey, we carried out high resolution electrical survey on granite area. We obtained the following result, by the comparison of resistivity distribution with established geological survey, lineament analysis and investigative drilling. 1. The resistivity structure of this survey area is almost able to classify it into the following four range. 1) the low resistivity range of 50-800 Ωm, 2) The resistivity range like the middle of 200-2000 Ωm, 3) The high resistivity range of 2000 Ωm over, 4) The low resistivity range of depth of the survey line 400-550 section. 2. The low resistivity range of 4) that correspond with the established geological data is not admitted. 3. It was confirmed that resistivity structure almost correspond to geological structure by the comparison with the established data. 4. The small-scale low resistivity area is admitted in the point equivalent to the lineament position of established. 5. We carried out it with the simulation method about the low resistivity range of 4). As a result, it understood that it has the possibility that the narrow ratio low resistivity area is shown as the wide ratio resistivity range in the analysis section. In the survey in this time, it is conceivable that the resistivity distribution with the possibility of the unhomogeneous and uncontinuation structure of the base rock is being shown conspicuously, the efficacy of the high resolution resistivity survey as geological survey on granite was shown. (author)

Aerial radiation survey techniques for efficient characterization of large areas

International Nuclear Information System (INIS)

Sydelko, T.; Riedhauser, S.

2006-01-01

Full text: Accidental or intentional releases of radioactive isotopes over potentially very large surface areas can pose serious health risks to humans and ecological receptors. Timely and appropriate responses to these releases depend upon rapid and accurate characterization of impacted areas. These characterization efforts can be adversely impacted by heavy vegetation, rugged terrain, urban environments, and the presence of unknown levels of radioactivity. Aerial survey techniques have proven highly successful in measuring gamma emissions from radiological contaminates of concern quickly, efficiently, and safely. Examples of accidental releases include the unintentional distribution of uranium mining ores during transportation, the loss of uranium processing and waste materials, unintentional nuclear power plant emissions into the atmosphere, and the distribution of isotopes during major flooding events such as the one recently occurring in New Orleans. Intentional releases have occurred during the use of deleted uranium ammunition test firing and war time use by military organizations. The threat of radiological dispersion device (dirty bomb) use by terrorists is currently a major concern of many major cities worldwide. The U.S. Department of Energy, in cooperation with its Remote Sensing Laboratory and Argonne National Laboratory, has developed a sophisticated aerial measurement system for identifying the locations, types, and quantities of gamma emitting radionuclides over extremely large areas. Helicopter mounted Nal detectors are flown at low altitude and constant speed along parallel paths measuring the full spectrum of gamma activity. Analytical procedures are capable of distinguishing between radiological contamination and changes in natural background emissions. Mapped and tabular results of these accurate, timely and cost effective aerial gamma radiation surveys can be used to assist with emergency response actions, if necessary, and to focus more

A Survey on Anomaly Based Host Intrusion Detection System

Science.gov (United States)

Jose, Shijoe; Malathi, D.; Reddy, Bharath; Jayaseeli, Dorathi

2018-04-01

An intrusion detection system (IDS) is hardware, software or a combination of two, for monitoring network or system activities to detect malicious signs. In computer security, designing a robust intrusion detection system is one of the most fundamental and important problems. The primary function of system is detecting intrusion and gives alerts when user tries to intrusion on timely manner. In these techniques when IDS find out intrusion it will send alert massage to the system administrator. Anomaly detection is an important problem that has been researched within diverse research areas and application domains. This survey tries to provide a structured and comprehensive overview of the research on anomaly detection. From the existing anomaly detection techniques, each technique has relative strengths and weaknesses. The current state of the experiment practice in the field of anomaly-based intrusion detection is reviewed and survey recent studies in this. This survey provides a study of existing anomaly detection techniques, and how the techniques used in one area can be applied in another application domain.

Lesotho - Enterprise Survey

Data.gov (United States)

Millennium Challenge Corporation — The 2011 MCA-Lesotho baseline enterprise survey is a national survey of enterprises. The main objective of the survey was to assess the current status of businesses...

Comprehensive geophysical survey technique in exploration for deep-buried hydrothermal type uranium deposits in Xiangshan volcanic basin, China

International Nuclear Information System (INIS)

Ke, D.

2014-01-01

According to recent drilling results, uranium mineralization has been found underground more than 1000 m deep in the Xiangshan volcanic basin, in where uranium exploration has been carried out for over 50 years. This paper presents a comprehensive geophysical survey technique, including audio magnetotelluric method (AMT), high resolution ground magnetic and radon survey, which aim to prospect deep-buried and concealed uranium deposits in Xiangshan volcanic basin. Based on research and application, a comprehensive geophysical technique consisting of data acquisition, processing and interpretation has been established. Concealed rock and ore-controlling structure buried deeper than 1000 m can be detected by using this technique. Moreover, one kind of anti-interference technique of AMT survey is presented, which can eliminate the interference induced by the high-voltage power lines. Result of AMT in Xiangshan volcanic basin is demonstrated as high-low-high mode, which indicates there are three layers in geology. The upper layer with high resistivity is mainly the react of porphyroclastic lava. The middle layer with low resistivity is metamorphic schists or dellenite whereas the lower layer with high resistivity is inferred as granite. The interface between middle and lower layer is recognized as the potential zone for occurrence of uranium deposits. According to the corresponding relation of the resistivity and magnetic anomaly with uranium ore bodies, the tracing model of faults and interfaces between the different rocks, and the forecasting model of advantageous area for uranium deposits have been established. In terms of the forecasting model, some significant sections for uranium deposits were delineated in the west of the Xiangshan volcanic basin. As a result, some achievements on uranium prospecting have been acquired. High grade economic uranium ore bodies have been found in several boreholes, which are located in the forecasted zones. (author)

Vertical Cable Seismic Survey for SMS exploration

Science.gov (United States)

Asakawa, Eiichi; Murakami, Fumitoshi; Tsukahara, Hotoshi; Mizohata, Shigeharu

2014-05-01

The Vertical Cable Seismic (VCS) survey is one of the reflection seismic methods. It uses hydrophone arrays vertically moored from the seafloor to record acoustic waves generated by sea-surface, deep-towed or ocean bottom sources. Analyzing the reflections from the sub-seabed, we could look into the subsurface structure. Because the VCS is an efficient high-resolution 3D seismic survey method for a spatially-bounded area, we proposed it for the SMS survey tool development program that the Ministry of Education, Culture, Sports, Science and Technology (MEXT) started in 2009. We have been developing the VCS survey system, including not only data acquisition hardware but data processing and analysis technique. We carried out several VCS surveys combining with surface towed source, deep towed source and ocean bottom source. The water depths of these surveys are from 100m up to 2100 m. Through these experiments, our VCS data acquisition system has been also completed. But the data processing techniques are still on the way. One of the most critical issues is the positioning in the water. The uncertainty in the positions of the source and of the hydrophones in water degraded the quality of subsurface image. GPS navigation system is available on sea surface, but in case of deep-towed source or ocean bottom source, the accuracy of shot position with SSBL/USBL is not sufficient for the very high-resolution imaging. We have developed a new approach to determine the positions in water using the travel time data from the source to VCS hydrophones. In 2013, we have carried out the second VCS survey using the surface-towed high-voltage sparker and ocean bottom source in the Izena Cauldron, which is one of the most promising SMS areas around Japan. The positions of ocean bottom source estimated by this method are consistent with the VCS field records. The VCS data with the sparker have been processed with 3D PSTM. It gives the very high resolution 3D volume deeper than two

A multispectral scanner survey of the Tonopah Test Range, Nevada. Date of survey: August 1993

International Nuclear Information System (INIS)

Brewster, S.B. Jr.; Howard, M.E.; Shines, J.E.

1994-08-01

The Multispectral Remote Sensing Department of the Remote Sensing Laboratory conducted an airborne multispectral scanner survey of a portion of the Tonopah Test Range, Nevada. The survey was conducted on August 21 and 22, 1993, using a Daedalus AADS1268 scanner and coincident aerial color photography. Flight altitudes were 5,000 feet (1,524 meters) above ground level for systematic coverage and 1,000 feet (304 meters) for selected areas of special interest. The multispectral scanner survey was initiated as part of an interim and limited investigation conducted to gather preliminary information regarding historical hazardous material release sites which could have environmental impacts. The overall investigation also includes an inventory of environmental restoration sites, a ground-based geophysical survey, and an aerial radiological survey. The multispectral scanner imagery and coincident aerial photography were analyzed for the detection, identification, and mapping of man-made soil disturbances. Several standard image enhancement techniques were applied to the data to assist image interpretation. A geologic ratio enhancement and a color composite consisting of AADS1268 channels 10, 7, and 9 (mid-infrared, red, and near-infrared spectral bands) proved most useful for detecting soil disturbances. A total of 358 disturbance sites were identified on the imagery and mapped using a geographic information system. Of these sites, 326 were located within the Tonopah Test Range while the remaining sites were present on the imagery but outside the site boundary. The mapped site locations are being used to support ongoing field investigations

FY 1992 Report on results of the survey/research project commissioned by Sunshine Project. Surveys on hydrogen-fired turbines; 1992 nendo suiso nensho turbine no chosa seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

Summarized herein are results of comprehensive surveys on hydrogen energy supply/utilization systems, centered by hydrogen-fired turbines for power generation. The surveyed items include hydrogen energy supply/utilization systems on an international scale, current state of power generation techniques and utilization of hydrogen, hydrogen-fired turbines for power generation, materials techniques for hydrogen-fired turbines, studies on and evaluation of economic viability of each system, expected effects, and problems involved in development. The surveys on the hydrogen production techniques pick up electrolysis with a solid polymer electrolyte as a promising candidate, and extract the scaling-up techniques, improvement of membrane durability, etc. as the research themes. The surveys on the hydrogen storage/transportation techniques indicate that hydrogen can be carried by a chemical medium for transportation/storage at normal temperature and pressure, for which the problems associated with medium loss and safety must be studied, and that the research themes for hydrogen-occluding alloys should include increasing quantities of hydrogen occluded for bulk transportation/storage at low energy, and decreasing cost. The surveys on hydrogen-fired turbines extract a number of problems to be solved, e.g., controlling hydrogen combustion, turbine designs, materials withstanding superhigh temperature for high-temperature combustion of hydrogen, and optimization of the power generation systems. (NEDO)

Survey on peripheral techniques of brown coal liquefaction techniques; Kattan ekika gijutsu ni kansuru shuhen gijutsu no chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-09-01

Described herein are results of survey on brown coal liquefaction techniques and peripheral techniques, centered by COSTEAM process under development in USA, solubilization by alcohol and liquefaction and cracking with the aid of tetrahydroquinoline as the hydrogen donor under development in Japan, and low-temperature carbonization and new promising techniques. The COSTEAM process shows higher reaction rates, conversions and oil yields for brown coal liquefaction than the one using hydrogen gas. Some of the problems involved in this process high viscosity and oxygenated compound content of the product oil. The product oil is acceptable as fuel for power generating plants and can be produced at a moderate cost, but may be unsuitable as vehicle fuel. Coal liquefaction and solubilization processes are mainly represented by those which use hydrogen. The hydrogen cost, which is high, determines the product price. The processes which use alcohol or tetrahydroquinoline are still in the experimental stage. (NEDO)

Survey of industrial radioisotope savings

International Nuclear Information System (INIS)

1965-01-01

Only three decades after the discovery of artificial radioactivity and two after radioisotopes became available in quantity, methods employing these as sources or tracers have found widespread use, not only in scientific research, but also in industrial process and product control. The sums spent by industry on these new techniques amount to millions of dollars a year. Realizing the overall attitude of industry to scientific progress - to accept only methods that pay relatively quickly - one can assume that the economic benefits must be of a still larger order of magnitude. In order to determine the extent to which radioisotopes are in daily use and to evaluate the economic benefits derived from such use, IAEA decided to make an 'International Survey on the Use of Radioisotopes in Industry'. In 1962, the Agency invited a number of its highly industrialized Member States to participate in this Survey. Similar surveys had been performed in various countries in the 1950's. However, the approaches and also the definition of the economic benefits differed greatly from one survey to another. Hence, the Agency's approach was to try to persuade all countries to conduct surveys at the same time, concerning the same categories of industries and using the same terms of costs, savings, etc. In total, 24 Member States of the Agency agreed to participate in the survey and in due course they submitted contributions. The national reports were discussed at a 'Study Group Meeting on Radioisotope Economics', convened in Vienna in March 1964. Based upon these discussions, the national reports have been edited and summarized. A publication showing the administration of the Survey and providing all details is now published by the Agency. From the publication it is evident that in general the return of technical information was quite high, of the order of 90%, but, unfortunately the economic response was much lower. However, most of the reports had some bearing on the economic aspects

Stereoscopic Visualization of Diffusion Tensor Imaging Data: A Comparative Survey of Visualization Techniques

International Nuclear Information System (INIS)

Raslan, O.; Debnam, J.M.; Ketonen, L.; Kumar, A.J.; Schellingerhout, D.; Wang, J.

2013-01-01

Diffusion tensor imaging (DTI) data has traditionally been displayed as a gray scale functional anisotropy map (GSFM) or color coded orientation map (CCOM). These methods use black and white or color with intensity values to map the complex multidimensional DTI data to a two-dimensional image. Alternative visualization techniques, such as V m ax maps utilize enhanced graphical representation of the principal eigenvector by means of a headless arrow on regular non stereoscopic (VM) or stereoscopic display (VMS). A survey of clinical utility of patients with intracranial neoplasms was carried out by 8 neuro radiologists using traditional and nontraditional methods of DTI display. Pairwise comparison studies of 5 intracranial neoplasms were performed with a structured questionnaire comparing GSFM, CCOM, VM, and VMS. Six of 8 neuro radiologists favored V m ax maps over traditional methods of display (GSFM and CCOM). When comparing the stereoscopic (VMS) and the non-stereoscopic (VM) modes, 4 favored VMS, 2 favored VM, and 2 had no preference. In conclusion, processing and visualizing DTI data stereoscopically is technically feasible. An initial survey of users indicated that V m ax based display methodology with or without stereoscopic visualization seems to be preferred over traditional methods to display DTI data.

A Survey of Librarian Perceptions of Information Literacy Techniques

Science.gov (United States)

Yearwood, Simone L.; Foasberg, Nancy M.; Rosenberg, Kenneth D.

2015-01-01

Teaching research competencies and information literacy is an integral part of the academic librarian's role. There has long been debate among librarians over what are the most effective methods of instruction for college students. Library Faculty members at a large urban university system were surveyed to determine their perceptions of the…

THE HETDEX PILOT SURVEY. I. SURVEY DESIGN, PERFORMANCE, AND CATALOG OF EMISSION-LINE GALAXIES

International Nuclear Information System (INIS)

Adams, Joshua J.; Blanc, Guillermo A.; Gebhardt, Karl; Hao, Lei; Byun, Joyce; Fry, Alex; Jeong, Donghui; Komatsu, Eiichiro; Hill, Gary J.; Cornell, Mark E.; MacQueen, Phillip J.; Drory, Niv; Bender, Ralf; Hopp, Ulrich; Kelzenberg, Ralf; Ciardullo, Robin; Gronwall, Caryl; Finkelstein, Steven L.; Gawiser, Eric; Kelz, Andreas

2011-01-01

We present a catalog of emission-line galaxies selected solely by their emission-line fluxes using a wide-field integral field spectrograph. This work is partially motivated as a pilot survey for the upcoming Hobby-Eberly Telescope Dark Energy Experiment. We describe the observations, reductions, detections, redshift classifications, line fluxes, and counterpart information for 397 emission-line galaxies detected over 169 □' with a 3500-5800 A bandpass under 5 A full-width-half-maximum (FWHM) spectral resolution. The survey's best sensitivity for unresolved objects under photometric conditions is between 4 and 20x 10 -17 erg s -1 cm -2 depending on the wavelength, and Lyα luminosities between 3 x 10 42 and 6 x 10 42 erg s -1 are detectable. This survey method complements narrowband and color-selection techniques in the search of high-redshift galaxies with its different selection properties and large volume probed. The four survey fields within the COSMOS, GOODS-N, MUNICS, and XMM-LSS areas are rich with existing, complementary data. We find 105 galaxies via their high-redshift Lyα emission at 1.9 44 □' which appear to be extended Lyα nebulae. We also find three high-z objects with rest-frame Lyα EW above the level believed to be achievable with normal star formation, EW 0 >240 A. Future papers will investigate the physical properties of this sample.

Optimal power flow: a bibliographic survey I. Formulations and deterministic methods

Energy Technology Data Exchange (ETDEWEB)

Frank, Stephen [Colorado School of Mines, Department of Electrical Engineering and Computer Science, Golden, CO (United States); Steponavice, Ingrida [University of Jyvaskyla, Department of Mathematical Information Technology, Agora (Finland); Rebennack, Steffen [Colorado School of Mines, Division of Economics and Business, Golden, CO (United States)

2012-09-15

Over the past half-century, optimal power flow (OPF) has become one of the most important and widely studied nonlinear optimization problems. In general, OPF seeks to optimize the operation of electric power generation, transmission, and distribution networks subject to system constraints and control limits. Within this framework, however, there is an extremely wide variety of OPF formulations and solution methods. Moreover, the nature of OPF continues to evolve due to modern electricity markets and renewable resource integration. In this two-part survey, we survey both the classical and recent OPF literature in order to provide a sound context for the state of the art in OPF formulation and solution methods. The survey contributes a comprehensive discussion of specific optimization techniques that have been applied to OPF, with an emphasis on the advantages, disadvantages, and computational characteristics of each. Part I of the survey (this article) provides an introduction and surveys the deterministic optimization methods that have been applied to OPF. Part II of the survey examines the recent trend towards stochastic, or non-deterministic, search techniques and hybrid methods for OPF. (orig.)

The environmental survey manual

International Nuclear Information System (INIS)

1987-08-01

The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

Survey of Machine Learning Methods for Database Security

Science.gov (United States)

Kamra, Ashish; Ber, Elisa

Application of machine learning techniques to database security is an emerging area of research. In this chapter, we present a survey of various approaches that use machine learning/data mining techniques to enhance the traditional security mechanisms of databases. There are two key database security areas in which these techniques have found applications, namely, detection of SQL Injection attacks and anomaly detection for defending against insider threats. Apart from the research prototypes and tools, various third-party commercial products are also available that provide database activity monitoring solutions by profiling database users and applications. We present a survey of such products. We end the chapter with a primer on mechanisms for responding to database anomalies.

Environmental monitoring using autonomous vehicles: a survey of recent searching techniques.

Science.gov (United States)

Bayat, Behzad; Crasta, Naveena; Crespi, Alessandro; Pascoal, António M; Ijspeert, Auke

2017-06-01

Autonomous vehicles are becoming an essential tool in a wide range of environmental applications that include ambient data acquisition, remote sensing, and mapping of the spatial extent of pollutant spills. Among these applications, pollution source localization has drawn increasing interest due to its scientific and commercial interest and the emergence of a new breed of robotic vehicles capable of operating in harsh environments without human supervision. The aim is to find the location of a region that is the source of a given substance of interest (e.g. a chemical pollutant at sea or a gas leakage in air) using a group of cooperative autonomous vehicles. Motivated by fast paced advances in this challenging area, this paper surveys recent advances in searching techniques that are at the core of environmental monitoring strategies using autonomous vehicles. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparison of passive soil vapor survey techniques at a Tijeras Arroyo site, Sandia National Laboratories, Albuquerque, New Mexico

International Nuclear Information System (INIS)

Eberle, C.S.; Wade, W.M.; Tharp, T.; Brinkman, J.

1996-01-01

Soil vapor surveys were performed to characterize the approximate location of soil contaminants at a hazardous waste site. The samplers were from two separate companies and a comparison was made between the results of the two techniques. These results will be used to design further investigations at the site

"Suntelligence" Survey

Science.gov (United States)

... to the American Academy of Dermatology's "Suntelligence" sun-smart survey. Please answer the following questions to measure ... be able to view a ranking of major cities suntelligence based on residents' responses to this survey. ...

Follow-up skeletal surveys for nonaccidental trauma: can a more limited survey be performed?

Energy Technology Data Exchange (ETDEWEB)

Harlan, Susan R. [University of Utah School of Medicine, Department of Radiology, Salt Lake City, UT (United States); Nixon, G.W.; Prince, Jeffrey S. [Primary Children' s Medical Center, Department of Medical Imaging, Salt Lake City, UT (United States); Campbell, Kristine A.; Hansen, Karen [University of Utah School of Medicine, Department of Pediatrics, Salt Lake City, UT (United States)

2009-09-15

Studies have demonstrated the value of the follow-up skeletal survey in identifying additional fractures, clarifying indeterminate findings, and improving dating of skeletal injuries in victims of physical abuse. To determine whether a more limited follow-up survey could yield the same radiologic data as a full follow-up survey. The study cohort comprised 101 children who had follow-up surveys that met our inclusion criteria. Consensus readings of both original and follow-up surveys were performed by two pediatric radiologists. These results were compared to determine additional findings from the follow-up surveys. Limited skeletal survey protocols were evaluated to determine whether they would detect the same fractures seen with a complete osseous survey. In the 101 children 244 fractures were identified on the initial osseous survey. Follow-up surveys demonstrated new information in 38 children (37.6%). A 15-view limited follow-up survey identified all additional information seen on the complete follow-up survey. Our data demonstrate that a 15-view limited follow-up skeletal survey could be performed without missing clinically significant new fractures and still allow proper identification of confirmed fractures or normal findings. A limited survey would decrease radiation dose in children. (orig.)

Follow-up skeletal surveys for nonaccidental trauma: can a more limited survey be performed?

International Nuclear Information System (INIS)

Harlan, Susan R.; Nixon, G.W.; Prince, Jeffrey S.; Campbell, Kristine A.; Hansen, Karen

2009-01-01

Studies have demonstrated the value of the follow-up skeletal survey in identifying additional fractures, clarifying indeterminate findings, and improving dating of skeletal injuries in victims of physical abuse. To determine whether a more limited follow-up survey could yield the same radiologic data as a full follow-up survey. The study cohort comprised 101 children who had follow-up surveys that met our inclusion criteria. Consensus readings of both original and follow-up surveys were performed by two pediatric radiologists. These results were compared to determine additional findings from the follow-up surveys. Limited skeletal survey protocols were evaluated to determine whether they would detect the same fractures seen with a complete osseous survey. In the 101 children 244 fractures were identified on the initial osseous survey. Follow-up surveys demonstrated new information in 38 children (37.6%). A 15-view limited follow-up survey identified all additional information seen on the complete follow-up survey. Our data demonstrate that a 15-view limited follow-up skeletal survey could be performed without missing clinically significant new fractures and still allow proper identification of confirmed fractures or normal findings. A limited survey would decrease radiation dose in children. (orig.)

A critical survey of live virtual machine migration techniques

Directory of Open Access Journals (Sweden)

Anita Choudhary

2017-11-01

Full Text Available Abstract Virtualization techniques effectively handle the growing demand for computing, storage, and communication resources in large-scale Cloud Data Centers (CDC. It helps to achieve different resource management objectives like load balancing, online system maintenance, proactive fault tolerance, power management, and resource sharing through Virtual Machine (VM migration. VM migration is a resource-intensive procedure as VM’s continuously demand appropriate CPU cycles, cache memory, memory capacity, and communication bandwidth. Therefore, this process degrades the performance of running applications and adversely affects efficiency of the data centers, particularly when Service Level Agreements (SLA and critical business objectives are to be met. Live VM migration is frequently used because it allows the availability of application service, while migration is performed. In this paper, we make an exhaustive survey of the literature on live VM migration and analyze the various proposed mechanisms. We first classify the types of Live VM migration (single, multiple and hybrid. Next, we categorize VM migration techniques based on duplication mechanisms (replication, de-duplication, redundancy, and compression and awareness of context (dependency, soft page, dirty page, and page fault and evaluate the various Live VM migration techniques. We discuss various performance metrics like application service downtime, total migration time and amount of data transferred. CPU, memory and storage data is transferred during the process of VM migration and we identify the category of data that needs to be transferred in each case. We present a brief discussion on security threats in live VM migration and categories them in three different classes (control plane, data plane, and migration module. We also explain the security requirements and existing solutions to mitigate possible attacks. Specific gaps are identified and the research challenges in improving

Responsive survey design, demographic data collection, and models of demographic behavior.

Science.gov (United States)

Axinn, William G; Link, Cynthia F; Groves, Robert M

2011-08-01

To address declining response rates and rising data-collection costs, survey methodologists have devised new techniques for using process data ("paradata") to address nonresponse by altering the survey design dynamically during data collection. We investigate the substantive consequences of responsive survey design-tools that use paradata to improve the representative qualities of surveys and control costs. By improving representation of reluctant respondents, responsive design can change our understanding of the topic being studied. Using the National Survey of Family Growth Cycle 6, we illustrate how responsive survey design can shape both demographic estimates and models of demographic behaviors based on survey data. By juxtaposing measures from regular and responsive data collection phases, we document how special efforts to interview reluctant respondents may affect demographic estimates. Results demonstrate the potential of responsive survey design to change the quality of demographic research based on survey data.

Regional anesthesia practice in China: a survey.

Science.gov (United States)

Huang, Jeffrey; Gao, Huan

2016-11-01

Neuraxial anesthesia has been widely used in China. Recently, Chinese anesthesiologists have applied nerve stimulator and ultrasound guidance for peripheral nerve blocks. Nationwide surveys about regional anesthesia practices in China are lacking. We surveyed Chinese anesthesiologists about regional anesthesia techniques, preference, drug selections, complications, and treatments. A survey was sent to all anesthesiologist members by WeChat. The respondents can choose mobile device or desktop to complete the survey. Each IP address is allowed to complete the survey once. A total of 6589 members read invitations. A total of 2654 responses were received with fully completed questionnaires, which represented an overall response rate of 40%. Forty-one percent of the respondents reported that more than 50% of surgeries in their hospitals were done under regional anesthesia. Most of the participants used test dose after epidural catheter insertion. The most common drug for test dose was 3-mL 1.5% lidocaine; 2.6% of the participants reported that they had treated a patient with epidural hematoma after neuraxial anesthesia. Most anesthesiologists (68.2%) performed peripheral nerve blocks as blind procedures based on the knowledge of anatomical landmarks. A majority of hospitals (80%) did not stock Intralipid; 61% of the respondents did not receive peripheral nerve block training. The current survey can serve as a benchmark for future comparisons and evaluation of regional anesthesia practices in China. This survey revealed potential regional anesthesia safety issues in China. Copyright © 2016 Elsevier Inc. All rights reserved.

The Aalborg Survey / Part 1 - Web Based Survey

DEFF Research Database (Denmark)

Harder, Henrik; Christensen, Cecilie Breinholm

Background and purpose The Aalborg Survey consists of four independent parts: a web, GPS and an interview based survey and a literature study, which together form a consistent investigation and research into use of urban space, and specifically into young people’s use of urban space: what young......) and the research focus within the cluster of Mobility and Tracking Technologies (MoTT), AAU. Summary / Part 1 Web Base Survey The 1st part of the research project Diverse Urban Spaces (DUS) has been carried out during the period from December 1st 2007 to February 1st 2008 as a Web Based Survey of the 27.040 gross...... [statistikbanken.dk, a] young people aged 14-23 living in Aalborg Municipality in 2008. The web based questionnaire has been distributed among the group of young people studying at upper secondary schools in Aalborg, i.e. 7.680 young people [statistikbanken.dk, b]. The resulting data from those respondents who...

The Aalborg Survey / Part 3 - Interview Based Survey

DEFF Research Database (Denmark)

Harder, Henrik; Christensen, Cecilie Breinholm; Jensen, Maria Vestergaard

Background and purpose The Aalborg Survey consists of four independent parts: a web, GPS and an interview based survey and a literature study, which together form a consistent investigation and research into use of urban space, and specifically into young people’s use of urban space: what young...... people do in urban spaces, where they are in the urban spaces and when the young people are in the urban spaces. The answers to these questions form the framework and enable further academic discussions and conclusions in relation to the overall research project Diverse Urban Spaces (DUS). The primary......) and the research focus within the cluster of Mobility and Tracking Technologies (MoTT), AAU. Summary / Part 3 - Interview Based Survey The 3rd part of the DUS research project has been carried out during the fall of 2009 and the summer and fall of 2010 as an interview based survey of 18 selected participants (nine...

Monitoring beach changes using GPS surveying techniques

Science.gov (United States)

Morton, Robert; Leach, Mark P.; Paine, Jeffrey G.; Cardoza, Michael A.

1993-01-01

A need exists for frequent and prompt updating of shoreline positions, rates of shoreline movement, and volumetric nearshore changes. To effectively monitor and predict these beach changes, accurate measurements of beach morphology incorporating both shore-parallel and shore-normal transects are required. Although it is possible to monitor beach dynamics using land-based surveying methods, it is generally not practical to collect data of sufficient density and resolution to satisfy a three-dimensional beach-change model of long segments of the coast. The challenge to coastal scientists is to devise new beach monitoring methods that address these needs and are rapid, reliable, relatively inexpensive, and maintain or improve measurement accuracy.

Developing the online survey.

Science.gov (United States)

Gordon, Jeffry S; McNew, Ryan

2008-12-01

Institutions of higher education are now using Internet-based technology tools to conduct surveys for data collection. Research shows that the type and quality of responses one receives with online surveys are comparable with what one receives in paper-based surveys. Data collection can take place on Web-based surveys, e-mail-based surveys, and personal digital assistants/Smartphone devices. Web surveys can be subscription templates, software packages installed on one's own server, or created from scratch using Web programming development tools. All of these approaches have their advantages and disadvantages. The survey owner must make informed decisions as to the right technology to implement. The correct choice can save hours of work in sorting, organizing, and analyzing data.

Basin Visual Estimation Technique (BVET) and Representative Reach Approaches to Wadeable Stream Surveys: Methodological Limitations and Future Directions

Science.gov (United States)

Lance R. Williams; Melvin L. Warren; Susan B. Adams; Joseph L. Arvai; Christopher M. Taylor

2004-01-01

Basin Visual Estimation Techniques (BVET) are used to estimate abundance for fish populations in small streams. With BVET, independent samples are drawn from natural habitat units in the stream rather than sampling "representative reaches." This sampling protocol provides an alternative to traditional reach-level surveys, which are criticized for their lack...

Anesthesia for thoracic surgery: A survey of middle eastern practice

Science.gov (United States)

Eldawlatly, Abdelazeem; Turkistani, Ahmed; Shelley, Ben; El-Tahan, Mohamed; Macfie, Alistair; Kinsella, John

2012-01-01

Purpose: The main objective of this survey is to describe the current practice of thoracic anesthesia in the Middle Eastern (ME) region. Methods: A prospective online survey. An invitation to participate was e-mailed to all members of the ME thoracic-anaesthesia group. A total of 58 members participated in the survey from 19 institutions in the Middle East. Questions concerned ventilation strategies during one-lung ventilation (OLV), anesthesia regimen, mode of postoperative analgesia, use of lung isolation techniques, and use of i.v. fluids. Results: Volume-controlled ventilation was favored over pressure-controlled ventilation (62% vs 38% of respondents, Panesthesia practice. Failure to pass a DLT and difficult airway are the most commonly cited indications for BB use. Regarding postoperative analgesia, the majority 61.8% favor thoracic epidural analgesia over other techniques (P<0.05). Conclusions: Our survey provides a contemporary snapshot of the ME thoracic anesthetic practice. PMID:23162388

Surveying ethnic minorities

NARCIS (Netherlands)

Joost Kappelhof

2015-01-01

Obtaining accurate survey data on ethnic minorities is not easy. Ethnic minorities are usually underrepresented in surveys, and it is moreover not certain that those who do take part in surveys are representative of the group the researcher is interested in. For example, is it only people with

A Survey on Nickel Titanium Rotary Instruments and their Usage Techniques by Endodontists in India.

Science.gov (United States)

Patil, Thimmanagowda N; Saraf, Prahlad A; Penukonda, Raghavendra; Vanaki, Sneha S; Kamatagi, Laxmikant

2017-05-01

The preference and usage of nickel titanium rotary instruments varies from individual to individual based on their technique, experience with the rotary systems and the clinical situation. Very limited information is available to explain the adoption of changing concepts with respect to nickel titanium rotary instruments pertaining to the endodontists in India. The aim of this study was to conduct a questionnaire survey to acquire the knowledge concerning different NiTi rotary instruments and their usage techniques by endodontists in India. A Survey questionnaire was designed which consisted of 32 questions regarding designation, demographics, experience with rotary instruments, usage of different file systems, usage techniques, frequency of reuse, occurrence of file fracture, reasons and their management was distributed by hand in the national postgraduate convention and also disseminated via electronic medium to 400 and 600 endodontists respectively. Information was collected from each individual to gain insight into the experiences and beliefs of endodontists concerning the new endodontic technology of rotary NiTi instrumentation based on their clinical experience with the rotary systems. The questions were designed to ascertain the problems, patterns of use and to identify areas of perceived or potential concern regarding the rotary instruments and the data acquired was statistically evaluated using Fisher's-exact test and the Chi-Square test. Overall 63.8% (638) endodontists responded. ProTaper was one of the most commonly used file system followed by M two and ProTaper Next. There was a significant co relation between the years of experience and the file re use frequency, preparation technique, file separation, management of file separation. A large number of Endodontists prefer to reuse the rotary NiTi instruments. As there was an increase in the experience, the incidence of file separation reduced with increasing number of re use frequency and with

The linear collider alignment and survey (LiCAS) project

International Nuclear Information System (INIS)

Bingham, Richard; Botcherby, Edward; Coe, Paul; Grzelak, Grzegorz; Mitra, Ankush; Reichold, Armin; Prenting, Johannes

2003-01-01

For the next generation of Linear Colliders (LC) the precision alignment of accelerator components will be critical. The DESY applied geodesy group has developed the concept of an automated 'survey train'. The train runs along the accelerator wall measuring the 3D position of a set of equispaced reference markers. This reference structure is then used to align the accelerator components. The LiCAS group is developing a measurement system for the survey train. It will use a combination of Laser Straightness Monitors (SM) and Frequency Scanning Interferometry (FSI). FSI is an interferometric length measurement technique originally developed for the online alignment of the ATLAS Inner Detector. This novel combination of optical techniques is expected to overcome the limitations of traditional open air survey. The authors describe the LiCAS project, the measurement systems and their integration into the survey train. The technical parameters and constraints will be mentioned. There will also be brief discussion of the second phase of the project to allow on-line monitoring of the LC alignment. (author)

Conducting online surveys

NARCIS (Netherlands)

Selm, M. van; Jankowski, N.W.

2006-01-01

The World Wide Web (WWW) is increasingly being used as a tool and platform for survey research. Two types of electronic or online surveys available for data collection are the email and Web based survey, and they constitute the focus of this paper. We address a multitude of issues researchers should

Guidelines for a Training Course in Noise Survey Techniques.

Science.gov (United States)

Shadley, John; And Others

The course is designed to train noise survey technicians during a 3-5 day period to make reliable measurements of 75 percent of the noise problems encountered in the community. The more complex noise problems remaining will continue to be handled by experienced specialists. These technicians will be trained to assist State and local governments in…

Plans for PEP survey and alignment: Status report

International Nuclear Information System (INIS)

Gunn, J.; Sah, R.

1975-01-01

This note discusses the current state of survey and alignment plans for PEP Stage I. Several surveying techniques are described; one is described in considerable detail. The survey and alignment task for PEP consists of positioning approximately 700 ring magnets, 100 injection line magnets, and 100 miscellaneous components. The alignment tolerances are tight and they are set by the requirement that closed orbit distortions must be small for proper storage ring operation. The alignment problem is aggravated by the circumstance that the storage ring components are placed in tunnels which span a large area (over 700 meters across) and which do not permit long lines of sight. 6 ref., 1 fig

INTEGRATED SURVEY FOR ARCHITECTURAL RESTORATION: A METHODOLOGICAL COMPARISON OF TWO CASE STUDIES

Directory of Open Access Journals (Sweden)

G. Bianchi

2016-06-01

Full Text Available A preliminary survey campaign is essential in projects of restoration, urban renewal, rebuilding or promotion of architectural heritage. Today several survey techniques allow full 3D object restitution and modelling that provides a richer description than simple 2D representations. However, the amount of data to collect increases dramatically and a trade-off between efficiency and productivity from one side and assuring accuracy and completeness of the results on the other must be found. Depending on the extent and the complexity of the task, a single technique or a combination of several ones might be employed. Especially when documentation at different scales and with different levels of detail are foreseen, the latter will likely be necessary. The paper describes two architectural surveys in Italy: the old village of Navelli (AQ, affected by the earthquake in 2009, and the two most relevant remains in Codiponte (MS, damaged by the earthquake in 2013, both in the context of a project of restoration and conservation. In both sites, a 3D survey was necessary to represent effectively the objects. An integrated survey campaign was performed in both cases, which consists of a GPS network as support for georeferencing, an aerial survey and a field survey made by laser scanner and close range photogrammetry. The two case studies, thanks to their peculiarities, can be taken as exemplar to wonder if the integration of different surveying techniques is today still mandatory or, considering the technical advances of each technology, it is in fact just optional.

Roof Moisture Surveys: Current State Of The Technology

Science.gov (United States)

Tobiasson, Wayne

1983-03-01

Moisture is the big enemy of compact roofing systems. Non-destructive nuclear, capacitance and infrared methods can all find wet insulation in such roofs but a few core samples are needed for verification. Nuclear and capacitance surveys generate quantitative results at grid points but examine only a small portion of the roof. Quantitative results are not usually provided by infrared scanners but they can rapidly examine every square inch of the roof. Being able to find wet areas when they are small is an important advantage. Prices vary with the scope of the investigation. For a particular scope, the three techniques are often cost-competitive. The limitations of each technique are related to the people involved as well as the equipment. When the right people are involved, non-destructive surveys are a very effective method for improving the long-term performance and reducing the life-cycle costs of roofing systems. Plans for the maintenance, repair or replacement of a roof should include a roof moisture survey.

Surveying Humaness

DEFF Research Database (Denmark)

Markussen, Randi; Gad, Christopher

carried out in a Danish county in order to improve treatment of people who have suffered from long-term illnesses. The surveys concern not only feed back on how people experience their present and past interaction with the social services and health care system; they also ask people to indicate the state......Christopher Gad. Ph.d. Dept. of Information and Media Studies Randi Markussen. Associate Professor, Dept. of Information and Media Studies. rmark@imv.au.dk   Abstract:   Surveying humanness -politics of care improvement   For various reasons we both were subjected to a specific survey procedure...... and development of a large collection of biological and psychological symptoms and psycho-social problems. However, the surveys say nothing about how the information will be of use to the people who answer the procedure or how this scientific intervention will be put to use more specifically within the public...

Indexing contamination surveys

International Nuclear Information System (INIS)

Brown, R.L.

1998-01-01

The responsibility for safely managing the Tank Farms at Hanford belongs to Lockheed Martin Hanford Corporation which is part of the six company Project Hanford Management Team led by Fluor Daniel Hanford, Inc.. These Tank Farm Facilities contain numerous outdoor contamination areas which are surveyed at a periodicity consistent with the potential radiological conditions, occupancy, and risk of changes in radiological conditions. This document describes the survey documentation and data tracking method devised to track the results of contamination surveys this process is referred to as indexing. The indexing process takes a representative data set as an indicator for the contamination status of the facility. The data are further manipulated into a single value that can be tracked and trended using standard statistical methodology. To report meaningful data, the routine contamination surveys must be performed in a manner that allows the survey method and the data collection process to be recreated. Three key criteria are necessary to accomplish this goal: Accurate maps, consistent documentation, and consistent consolidation of data meeting these criteria provides data of sufficient quality to be tracked. Tracking of survey data is accomplished by converting the individual survey results into a weighted value, corrected for the actual number of survey points. This information can be compared over time using standard statistical analysis to identify trends. At the Tank Farms, the need to track and trend the facility's radiological status presents unique challenges. Many of these Tank Farm facilities date back to the second world war. The Tank Farm Facilities are exposed to weather extremes, plant and animal intrusion, as well as all of the normal challenges associated with handling radiological waste streams. Routine radiological surveys did not provide a radiological status adequate for continuing comparisons

Surveys & Programs

Science.gov (United States)

Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My residential construction. Business Dynamics Statistics (BDS) Provides measures of openings and closings, job

The sloan digital sky survey-II supernova survey

DEFF Research Database (Denmark)

Frieman, Joshua A.; Bassett, Bruce; Becker, Andrew

2008-01-01

The Sloan Digital Sky Survey-II (SDSS-II) has embarked on a multi-year project to identify and measure light curves for intermediate-redshift (0.05 < z < 0.35) Type Ia supernovae (SNe Ia) using repeated five-band (ugriz) imaging over an area of 300 sq. deg. The survey region is a stripe 2.5° wide...

Physics Survey Overview

International Nuclear Information System (INIS)

2002-01-01

An overview of a series of assignments of the branches of physics carried out by the Board on Physics and Astronomy of the National Research Council. It identifies further theories in physics and makes recommendations on preventive priorities. The Board on Physics and Astronomy (BPA) has conducted a new decadal survey of physics entitled ''Physics in a New Era''. The survey includes assessments of the main branches of physics as well as certain selected emerging areas. The various elements of the survey were prepared by separately-appointed National Research Council (NRC) committees. The BPA formed the Physics Survey Overview Committee (PSOVC) to complete the survey by preparing an overview of the field of physics to summarize and synthesize the results of the various assessments and to address cross-cutting issues that concern physics as a whole

Musculoskeletal impairment survey in Rwanda: Design of survey tool, survey methodology, and results of the pilot study (a cross sectional survey

Directory of Open Access Journals (Sweden)

Simms Victoria

2007-03-01

Full Text Available Abstract Background Musculoskeletal impairment (MSI is an important cause of morbidity and mortality worldwide, especially in developing countries. Prevalence studies for MSI in the developing world have used varying methodologies and are seldom directly comparable. This study aimed to develop a new tool to screen for and diagnose MSI and to pilot test the methodology for a national survey in Rwanda. Methods A 7 question screening tool to identify cases of MSI was developed through literature review and discussions with healthcare professionals. To validate the tool, trained rehabilitation technicians screened 93 previously identified gold standard 'cases' and 86 'non cases'. Sensitivity, specificity and positive predictive value were calculated. A standardised examination protocol was developed to determine the aetiology and diagnosis of MSI for those who fail the screening test. For the national survey in Rwanda, multistage cluster random sampling, with probability proportional to size procedures will be used for selection of a cross-sectional, nationally representative sample of the population. Households to be surveyed will be chosen through compact segment sampling and all individuals within chosen households will be screened. A pilot survey of 680 individuals was conducted using the protocol. Results: The screening tool demonstrated 99% sensitivity and 97% specificity for MSI, and a positive predictive value of 98%. During the pilot study 468 out of 680 eligible subjects (69% were screened. 45 diagnoses were identified in 38 persons who were cases of MSI. The subjects were grouped into categories based on diagnostic subgroups of congenital (1, traumatic (17, infective (2 neurological (6 and other acquired(19. They were also separated into mild (42.1%, moderate (42.1% and severe (15.8% cases, using an operational definition derived from the World Health Organisation's International Classification of Functioning, Disability and Health

The Kilo-Degree Survey

NARCIS (Netherlands)

de Jong, J. T. A.; Kuijken, K.; Applegate, D.; Begeman, K.; Belikov, A.; Blake, C.; Bout, J.; Boxhoorn, D.; Buddelmeijer, H.; Buddendiek, A.; Cacciato, M.; Capaccioli, M.; Choi, A.; Cordes, O.; Covone, G.; Dall'Ora, M.; Edge, A.; Erben, T.; Franse, J.; Getman, F.; Grado, A.; Harnois-Deraps, J.; Helmich, E.; Herbonnet, R.; Heymans, C.; Hildebrandt, H.; Hoekstra, H.; Huang, Z.; Irisarri, N.; Joachimi, B.; Köhlinger, F.; Kitching, T.; La Barbera, F.; Lacerda, P.; McFarland, J.; Miller, L.; Nakajima, R.; Napolitano, N. R.; Paolillo, M.; Peacock, J.; Pila-Diez, B.; Puddu, E.; Radovich, M.; Rifatto, A.; Schneider, P.; Schrabback, T.; Sifon, C.; Sikkema, G.; Simon, P.; Sutherland, W.; Tudorica, A.; Valentijn, E.; van der Burg, R.; van Uitert, E.; van Waerbeke, L.; Velander, M.; Kleijn, G. V.; Viola, M.; Vriend, W.-J.

2013-01-01

The Kilo-Degree Survey (KiDS), a 1500-square-degree optical imaging survey with the recently commissioned OmegaCAM wide-field imager on the VLT Survey Telescope (VST), is described. KiDS will image two fields in u-,g-,r- and i-bands and, together with the VIKING survey, produce nine-band (u- to

Optimal power flow: a bibliographic survey II. Non-deterministic and hybrid methods

Energy Technology Data Exchange (ETDEWEB)

Frank, Stephen [Colorado School of Mines, Department of Electrical Engineering and Computer Science, Golden, CO (United States); Steponavice, Ingrida [Univ. of Jyvaskyla, Dept. of Mathematical Information Technology, Agora (Finland); Rebennack, Steffen [Colorado School of Mines, Division of Economics and Business, Golden, CO (United States)

2012-09-15

Over the past half-century, optimal power flow (OPF) has become one of the most important and widely studied nonlinear optimization problems. In general, OPF seeks to optimize the operation of electric power generation, transmission, and distribution networks subject to system constraints and control limits. Within this framework, however, there is an extremely wide variety of OPF formulations and solution methods. Moreover, the nature of OPF continues to evolve due to modern electricity markets and renewable resource integration. In this two-part survey, we survey both the classical and recent OPF literature in order to provide a sound context for the state of the art in OPF formulation and solution methods. The survey contributes a comprehensive discussion of specific optimization techniques that have been applied to OPF, with an emphasis on the advantages, disadvantages, and computational characteristics of each. Part I of the survey provides an introduction and surveys the deterministic optimization methods that have been applied to OPF. Part II of the survey (this article) examines the recent trend towards stochastic, or non-deterministic, search techniques and hybrid methods for OPF. (orig.)

Groundwater discharge mapping at Altnabreac by thermal infrared linescan surveying

International Nuclear Information System (INIS)

Brereton, N.R.; Hall, D.H.

1983-07-01

A thermal infra-red linescan survey has been carried out of the area around Altnabreac, Caithness. The objectives of the survey were: to assess the applicability of the technique to the location of springs discharging from peat covered crystalline rocks; to provide the locations of springs for a subsequent geochemical sampling programme; and to gain clearer understanding of the ground water circulation patterns in the area. The number and distribution of springs located by the survey has proved to be far greater than had been previously anticipated and the capabilities of the technique have been clearly demonstrated. The results, together with other geochemical and hydrogeological data, indicate that the majority of the springs represent near surface recent groundwaters circulating within the moraine deposits and weathered granite. (author)

Survey on Ranging Sensors and Cooperative Techniques for Relative Positioning of Vehicles

Directory of Open Access Journals (Sweden)

Fabian de Ponte Müller

2017-01-01

Full Text Available Future driver assistance systems will rely on accurate, reliable and continuous knowledge on the position of other road participants, including pedestrians, bicycles and other vehicles. The usual approach to tackle this requirement is to use on-board ranging sensors inside the vehicle. Radar, laser scanners or vision-based systems are able to detect objects in their line-of-sight. In contrast to these non-cooperative ranging sensors, cooperative approaches follow a strategy in which other road participants actively support the estimation of the relative position. The limitations of on-board ranging sensors regarding their detection range and angle of view and the facility of blockage can be approached by using a cooperative approach based on vehicle-to-vehicle communication. The fusion of both, cooperative and non-cooperative strategies, seems to offer the largest benefits regarding accuracy, availability and robustness. This survey offers the reader a comprehensive review on different techniques for vehicle relative positioning. The reader will learn the important performance indicators when it comes to relative positioning of vehicles, the different technologies that are both commercially available and currently under research, their expected performance and their intrinsic limitations. Moreover, the latest research in the area of vision-based systems for vehicle detection, as well as the latest work on GNSS-based vehicle localization and vehicular communication for relative positioning of vehicles, are reviewed. The survey also includes the research work on the fusion of cooperative and non-cooperative approaches to increase the reliability and the availability.

A survey of fault diagnosis technology

Science.gov (United States)

Riedesel, Joel

1989-01-01

Existing techniques and methodologies for fault diagnosis are surveyed. The techniques run the gamut from theoretical artificial intelligence work to conventional software engineering applications. They are shown to define a spectrum of implementation alternatives where tradeoffs determine their position on the spectrum. Various tradeoffs include execution time limitations and memory requirements of the algorithms as well as their effectiveness in addressing the fault diagnosis problem.

Analgesic techniques in minor painful procedures in neonatal units: a survey in northern Italy.

Science.gov (United States)

Codipietro, Luigi; Bailo, Elena; Nangeroni, Marco; Ponzone, Alberto; Grazia, Giuseppe

2011-01-01

The aim of this survey was to evaluate the current practice regarding pain assessment and pain management strategies adopted in commonly performed minor painful procedures in Northern Italian Neonatal Intensive Care Units (NICUs). A multicenter survey was conducted between 2008 and 2009 in 35 NICUs. The first part of the survey form covered pain assessment tools, the timing of analgesics, and the availability of written guidelines. A second section evaluated the analgesic strategies adopted in commonly performed painful procedures. The listed analgesic procedures were as follows: oral sweet solutions alone, non-nutritive sucking (NNS) alone, a combination of sweet solutions and NNS, breast-feeding where available, and topical anesthetics. Completed questionnaires were returned from 30 neonatal units (85.7% response rate). Ten of the 30 NICUs reported using pain assessment tools for minor invasive procedures. Neonatal Infant Pain Scale was the most frequently used pain scale (60%). Twenty neonatal units had written guidelines directing pain management practices. The most frequently used procedures were pacifiers alone (69%), followed by sweet-tasting solutions (58%). A 5% glucose solution was the most frequently utilized sweet-tasting solution (76.7%). A minority of NICUs (16.7%) administered 12% sucrose solutions for analgesia and the application of topical anesthetics was found in 27% of NICUs while breast-feeding was performed in 7% of NICUs. This study found a low adherence to national and international guidelines for analgesia in minor procedures: the underuse of neonatal pain scales (33%), sucrose solution administration before heel lance (23.3%), topical anesthetics before venipuncture, or other analgesic techniques. The presence of written pain control guidelines in these regions of Northern Italy increased in recent years (from 25% to 66%). © 2010 World Institute of Pain.

Survey of radiological safety in dental practice

Energy Technology Data Exchange (ETDEWEB)

Gill, J R [UKAEA Health and Safety Branch, London; Hudson, A P

1977-01-01

A pilot survey of radiological protection in dental practice in Great Britain has been requested by the Health and Safety Executive and is now in progress. The survey should provide more precise data on the use of X-ray equipment. There are approximately 13,000 dentists in Great Britain using X-ray apparatus, and some 600 of these have been selected, on a statistical basis, to be invited to make use of a postal survey over a six month period. The postal survey technique to be used has already been developed as a service following requests from individual dentists. The dentist receives a questionnaire and three initial films to test the timer, then two special cassettes incorporating film and filters. Film badges are worn over a 12 week period by the dentist and by any staff who assist in radiography. Follow-up visits to discuss the survey will be made to one in ten of the selected dentists. The results will give the individual dentists, without cost, assurance of the efficient functioning of their equipment, and advice, should any remedial measures be necessary. Concurrently, the resulting statistics will give an indication of how many, if any, practices fall short of the recommendations of the Code of Practice for the Protection of Persons against Ionizing Radiations arising from Medical and Dental Use. Further action in respect of the Health and Safety at Work Act will be determined in the light of the survey.

The Hyper Suprime-Cam SSP Survey: Overview and survey design

Science.gov (United States)

Aihara, Hiroaki; Arimoto, Nobuo; Armstrong, Robert; Arnouts, Stéphane; Bahcall, Neta A.; Bickerton, Steven; Bosch, James; Bundy, Kevin; Capak, Peter L.; Chan, James H. H.; Chiba, Masashi; Coupon, Jean; Egami, Eiichi; Enoki, Motohiro; Finet, Francois; Fujimori, Hiroki; Fujimoto, Seiji; Furusawa, Hisanori; Furusawa, Junko; Goto, Tomotsugu; Goulding, Andy; Greco, Johnny P.; Greene, Jenny E.; Gunn, James E.; Hamana, Takashi; Harikane, Yuichi; Hashimoto, Yasuhiro; Hattori, Takashi; Hayashi, Masao; Hayashi, Yusuke; Hełminiak, Krzysztof G.; Higuchi, Ryo; Hikage, Chiaki; Ho, Paul T. P.; Hsieh, Bau-Ching; Huang, Kuiyun; Huang, Song; Ikeda, Hiroyuki; Imanishi, Masatoshi; Inoue, Akio K.; Iwasawa, Kazushi; Iwata, Ikuru; Jaelani, Anton T.; Jian, Hung-Yu; Kamata, Yukiko; Karoji, Hiroshi; Kashikawa, Nobunari; Katayama, Nobuhiko; Kawanomoto, Satoshi; Kayo, Issha; Koda, Jin; Koike, Michitaro; Kojima, Takashi; Komiyama, Yutaka; Konno, Akira; Koshida, Shintaro; Koyama, Yusei; Kusakabe, Haruka; Leauthaud, Alexie; Lee, Chien-Hsiu; Lin, Lihwai; Lin, Yen-Ting; Lupton, Robert H.; Mandelbaum, Rachel; Matsuoka, Yoshiki; Medezinski, Elinor; Mineo, Sogo; Miyama, Shoken; Miyatake, Hironao; Miyazaki, Satoshi; Momose, Rieko; More, Anupreeta; More, Surhud; Moritani, Yuki; Moriya, Takashi J.; Morokuma, Tomoki; Mukae, Shiro; Murata, Ryoma; Murayama, Hitoshi; Nagao, Tohru; Nakata, Fumiaki; Niida, Mana; Niikura, Hiroko; Nishizawa, Atsushi J.; Obuchi, Yoshiyuki; Oguri, Masamune; Oishi, Yukie; Okabe, Nobuhiro; Okamoto, Sakurako; Okura, Yuki; Ono, Yoshiaki; Onodera, Masato; Onoue, Masafusa; Osato, Ken; Ouchi, Masami; Price, Paul A.; Pyo, Tae-Soo; Sako, Masao; Sawicki, Marcin; Shibuya, Takatoshi; Shimasaku, Kazuhiro; Shimono, Atsushi; Shirasaki, Masato; Silverman, John D.; Simet, Melanie; Speagle, Joshua; Spergel, David N.; Strauss, Michael A.; Sugahara, Yuma; Sugiyama, Naoshi; Suto, Yasushi; Suyu, Sherry H.; Suzuki, Nao; Tait, Philip J.; Takada, Masahiro; Takata, Tadafumi; Tamura, Naoyuki; Tanaka, Manobu M.; Tanaka, Masaomi; Tanaka, Masayuki; Tanaka, Yoko; Terai, Tsuyoshi; Terashima, Yuichi; Toba, Yoshiki; Tominaga, Nozomu; Toshikawa, Jun; Turner, Edwin L.; Uchida, Tomohisa; Uchiyama, Hisakazu; Umetsu, Keiichi; Uraguchi, Fumihiro; Urata, Yuji; Usuda, Tomonori; Utsumi, Yousuke; Wang, Shiang-Yu; Wang, Wei-Hao; Wong, Kenneth C.; Yabe, Kiyoto; Yamada, Yoshihiko; Yamanoi, Hitomi; Yasuda, Naoki; Yeh, Sherry; Yonehara, Atsunori; Yuma, Suraphong

2018-01-01

Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2-m Subaru telescope on the summit of Mauna Kea in Hawaii. A team of scientists from Japan, Taiwan, and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg2 in five broad bands (grizy), with a 5 σ point-source depth of r ≈ 26. The Deep layer covers a total of 26 deg2 in four fields, going roughly a magnitude fainter, while the UltraDeep layer goes almost a magnitude fainter still in two pointings of HSC (a total of 3.5 deg2). Here we describe the instrument, the science goals of the survey, and the survey strategy and data processing. This paper serves as an introduction to a special issue of the Publications of the Astronomical Society of Japan, which includes a large number of technical and scientific papers describing results from the early phases of this survey.

Predicting survey responses: how and why semantics shape survey statistics on organizational behaviour.

Directory of Open Access Journals (Sweden)

Jan Ketil Arnulf

Full Text Available Some disciplines in the social sciences rely heavily on collecting survey responses to detect empirical relationships among variables. We explored whether these relationships were a priori predictable from the semantic properties of the survey items, using language processing algorithms which are now available as new research methods. Language processing algorithms were used to calculate the semantic similarity among all items in state-of-the-art surveys from Organisational Behaviour research. These surveys covered areas such as transformational leadership, work motivation and work outcomes. This information was used to explain and predict the response patterns from real subjects. Semantic algorithms explained 60-86% of the variance in the response patterns and allowed remarkably precise prediction of survey responses from humans, except in a personality test. Even the relationships between independent and their purported dependent variables were accurately predicted. This raises concern about the empirical nature of data collected through some surveys if results are already given a priori through the way subjects are being asked. Survey response patterns seem heavily determined by semantics. Language algorithms may suggest these prior to administering a survey. This study suggests that semantic algorithms are becoming new tools for the social sciences, opening perspectives on survey responses that prevalent psychometric theory cannot explain.

Scala tympani cochleostomy survey: a follow-up study.

Science.gov (United States)

Iseli, Claire; Adunka, Oliver F; Buchman, Craig A

2014-08-01

To reassess cochleostomy techniques among North American cochlear implant surgeons after a 6-year period of widespread education and research on the topic. Prospective cohort study. A multiple-choice survey of cochlear implant techniques was distributed to surgeons attending the William House Cochlear Implant Study Group in 2006 and 2012. This survey contained questions regarding routine surgical access and cochleostomy techniques. Responses were anonymous, and >50% were repeat respondents. Statistical analysis sought changes in technique in the past 6 years. Comparisons between 2006 and 2012 responses revealed no significant changes in the proportion of surgeons identifying the facial nerve or chorda tympani. By contrast, respondents in 2012 were more likely to drill off the round window niche overhang (P < .001), use a round window insertion (P < .001), or make a smaller cochleostomy (P = .003). In two images of a transfacial recess approach, there was a significant increase in the proportion choosing an inferior or anterior cochleostomy site over a superior location (image 1, 76% in 2006 to 92% in 2012, P = .003; image 3, 78% to 90%, respectively, P = .044). This repeat survey documents a change in practice among cochlear implant surgeons. Specifically, scala tympani access techniques now appear to be more consistent with known anatomical relationships in the round window region. These findings may have resulted from the concerted education and research efforts over the past 6 years. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

Identifying Careless Responses in Survey Data

Science.gov (United States)

Meade, Adam W.; Craig, S. Bartholomew

2012-01-01

When data are collected via anonymous Internet surveys, particularly under conditions of obligatory participation (such as with student samples), data quality can be a concern. However, little guidance exists in the published literature regarding techniques for detecting careless responses. Previously several potential approaches have been…

Detection probability in aerial surveys of feral horses

Science.gov (United States)

Ransom, Jason I.

2011-01-01

Observation bias pervades data collected during aerial surveys of large animals, and although some sources can be mitigated with informed planning, others must be addressed using valid sampling techniques that carefully model detection probability. Nonetheless, aerial surveys are frequently employed to count large mammals without applying such methods to account for heterogeneity in visibility of animal groups on the landscape. This often leaves managers and interest groups at odds over decisions that are not adequately informed. I analyzed detection of feral horse (Equus caballus) groups by dual independent observers from 24 fixed-wing and 16 helicopter flights using mixed-effect logistic regression models to investigate potential sources of observation bias. I accounted for observer skill, population location, and aircraft type in the model structure and analyzed the effects of group size, sun effect (position related to observer), vegetation type, topography, cloud cover, percent snow cover, and observer fatigue on detection of horse groups. The most important model-averaged effects for both fixed-wing and helicopter surveys included group size (fixed-wing: odds ratio = 0.891, 95% CI = 0.850–0.935; helicopter: odds ratio = 0.640, 95% CI = 0.587–0.698) and sun effect (fixed-wing: odds ratio = 0.632, 95% CI = 0.350–1.141; helicopter: odds ratio = 0.194, 95% CI = 0.080–0.470). Observer fatigue was also an important effect in the best model for helicopter surveys, with detection probability declining after 3 hr of survey time (odds ratio = 0.278, 95% CI = 0.144–0.537). Biases arising from sun effect and observer fatigue can be mitigated by pre-flight survey design. Other sources of bias, such as those arising from group size, topography, and vegetation can only be addressed by employing valid sampling techniques such as double sampling, mark–resight (batch-marked animals), mark–recapture (uniquely marked and

Research progress in airborne surveys of terrestrial gamma radiation

International Nuclear Information System (INIS)

Burson, Z.G.

1974-01-01

Progress during the last few years in airborne surveys of terrestrial gamma radiation, i.e. in the measuring, recording, and interpreting of gamma ray signals in NaI(Tl) crystals, is discussed. Non-terrestrial background contributions have been accurately characterized. The feasibility of determining the water equivalent of snow cover by aerial survey techniques has been demonstrated. Repeat surveys over areas surrounding reactor sites can now be used to detect average differences of less than 1.0 μR/hr in terrestrial gamma radiation levels. New data acquisition and recording systems allow isotope concentrations and total inventories to be measured in spatial resolutions of a few hundred feet. Aerial survey data have been combined with population distribution data to obtain population exposure values from natural terrestrial gamma radiation around reactor sites

Pilot pulsar surveys with LOFAR

NARCIS (Netherlands)

Coenen, T.

2013-01-01

We are performing two complementary pilot pulsar surveys as part of LOFAR commissioning. The LOFAR Pilot Pulsar Survey (LPPS) is a shallow all-sky survey using an incoherent combination of LOFAR stations. The LOFAR Tied-Array Survey (LOTAS) is a deeper pilot survey using 19 simultaneous tied-array

2015 Community Survey Data

Data.gov (United States)

Town of Chapel Hill, North Carolina — These are the answers to the 2015 Community Survey.A comprehensive summary of the survey results can be found here.The survey asked town members to address their...

Issues in environmental survey design

International Nuclear Information System (INIS)

Iachan, R.

1989-01-01

Several environmental survey design issues are discussed and illustrated with surveys designed by Research Triangle Institute statisticians. Issues related to sampling and nonsampling errors are illustrated for indoor air quality surveys, radon surveys, pesticide surveys, and occupational and personal exposure surveys. Sample design issues include the use of auxiliary information (e.g. for stratification), and sampling in time. We also discuss the reduction and estimation of nonsampling errors, including nonresponse and measurement bias

USING SURVEY OF SERIES IN AUDIT

Directory of Open Access Journals (Sweden)

OFILEANU DIMI

2014-12-01

Full Text Available The efficiency of financial audit within an entity can be made by applying sampling statistical techniques. International auditing standards offer the possibility to test only part of financial information of an entity by means of different sampling techniques. The article is a rhetorical and practical speculation regarding the methodology and the possibility to apply a statistical survey of series in the research of documents and accounting records.

A novel approach for detail surveys by the motorized GPSSIT concept in residentials areas and its application

Directory of Open Access Journals (Sweden)

Ibrahim Kalayci

Full Text Available This paper introduces the usage and reliability of Motorized GPSSIT technique which is a novel approach for surveying. It reviews the advantages of Motorized GPSSIT concept and also considers to provide GNSS accuracy in the process of surveying especially for the cases which cannot be surveyed directly by the satellite navigation systems (GPS-GNSS, such as closely packed residential areas, tall buildings, trees, etc., and also places which GNSS receivers cannot be work efficiently due to signal interferences. In this technique, all the survey instruments are installed on a bed of a pick-up truck whereas in present techniques they are installed on the ground, therefore it is called Motorized GPSSIT. Study area was chosen within the housing area of our campus. In this area, classical surveying, GPSSIT and Motorized GPSSIT were performed to collect data for comparison and for the analysis of this technique's usability and reliability. Stop and Go and RTK surveying techniques were performed with GPSSIT and Motorized GPSSIT concepts. It is shown that the Motorized GPSSIT technique is applicable as other present techniques in terms of accuracy and reliability.

Redshift Survey Strategies

Science.gov (United States)

Jones, A. W.; Bland-Hawthorn, J.; Kaiser, N.

1994-12-01

In the first half of 1995, the Anglo-Australian Observatory is due to commission a wide field (2.1(deg) ), 400-fiber, double spectrograph system (2dF) at the f/3.3 prime focus of the AAT 3.9m bi-national facility. The instrument should be able to measure ~ 4000 galaxy redshifts (assuming a magnitude limit of b_J ~\\ 20) in a single dark night and is therefore ideally suited to studies of large-scale structure. We have carried out simple 3D numerical simulations to judge the relative merits of sparse surveys and contiguous surveys. We generate a survey volume and fill it randomly with particles according to a selection function which mimics a magnitude-limited survey at b_J = 19.7. Each of the particles is perturbed by a gaussian random field according to the dimensionless power spectrum k(3) P(k) / 2pi (2) determined by Feldman, Kaiser & Peacock (1994) from the IRAS QDOT survey. We introduce some redshift-space distortion as described by Kaiser (1987), a `thermal' component measured from pairwise velocities (Davis & Peebles 1983), and `fingers of god' due to rich clusters at random density enhancements. Our particular concern is to understand how the window function W(2(k)) of the survey geometry compromises the accuracy of statistical measures [e.g., P(k), xi (r), xi (r_sigma ,r_pi )] commonly used in the study of large-scale structure. We also examine the reliability of various tools (e.g. genus) for describing the topological structure within a contiguous region of the survey.

Regulatory and licensee surveys

International Nuclear Information System (INIS)

2009-01-01

Prior to the workshop two CSNI/WGHOF surveys were distributed. One survey was directed at regulatory bodies and the other was directed at plant licensees. The surveys were: 1 - Regulatory Expectations of Licensees' Arrangements to Ensure Suitable Organisational Structure, Resources and Competencies to Manage Safety (sent to WGHOF regulatory members). The survey requested that the respondents provide a brief overview of the situation related to plant organisations in their country, their regulatory expectations and their formal requirements. The survey addressed three subjects: the demonstration and documentation of organisational structures, resources and competencies, organisational changes, issues for improvement (for both current and new plants). Responses were received from eleven regulatory bodies. 2 - Approaches to Justify Organisational Suitability (sent to selected licensees). The purpose of the survey to was to gain an understanding of how licensees ensure organisational suitability, resources and competencies. This information was used to assist in the development of the issues and subjects that were addressed at the group discussion sessions. Responses were received from over fifteen licensees from nine countries. The survey requested that the licensees provide information on how they ensure effective organisational structures at their plants. The survey grouped the questions into the following four categories: organisational safety functions, resource and competence, decision-making and communication, good examples and improvement needs. The findings from these surveys were used in conjunction with other factors to identify the key issues for the workshop discussion sessions. The responses from these two surveys are discussed briefly in Sections 4 and 5 of this report. More extensive reviews of the regulatory and licensee responses are provided in Appendix 1

The Southern H ii Region Discovery Survey (SHRDS): Pilot Survey

Energy Technology Data Exchange (ETDEWEB)

Brown, C.; Dickey, John M. [School of Physical Sciences, Private Bag 37, University of Tasmania, Hobart, TAS, 7001 (Australia); Jordan, C. [International Centre for Radio Astronomy Research, Curtin University, Perth, WA, 6845 (Australia); Anderson, L. D.; Armentrout, W. P. [Department of Physics and Astronomy, West Virginia University, P.O. Box 6315, Morgantown, WV 26506 (United States); Balser, Dana S.; Wenger, Trey V. [National Radio Astronomy Observatory, 520 Edgemont Road, Charlottesville, VA 22904 (United States); Bania, T. M. [Institute for Astrophysical Research, Department of Astronomy, Boston University, 725 Commonwealth Avenue, Boston, MA 02215 (United States); Dawson, J. R. [Department of Physics and Astronomy and MQ Research Centre in Astronomy, Astrophysics and Astrophotonics, Macquarie University, NSW, 2109 (Australia); Mc Clure-Griffiths, N. M. [Research School of Astronomy and Astrophysics, The Australian National University, Canberra ACT 2611 (Australia)

2017-07-01

The Southern H ii Region Discovery Survey is a survey of the third and fourth quadrants of the Galactic plane that will detect radio recombination line (RRL) and continuum emission at cm-wavelengths from several hundred H ii region candidates using the Australia Telescope Compact Array. The targets for this survey come from the WISE Catalog of Galactic H ii Regions and were identified based on mid-infrared and radio continuum emission. In this pilot project, two different configurations of the Compact Array Broad Band receiver and spectrometer system were used for short test observations. The pilot surveys detected RRL emission from 36 of 53 H ii region candidates, as well as seven known H ii regions that were included for calibration. These 36 recombination line detections confirm that the candidates are true H ii regions and allow us to estimate their distances.

The Southern H ii Region Discovery Survey (SHRDS): Pilot Survey

International Nuclear Information System (INIS)

Brown, C.; Dickey, John M.; Jordan, C.; Anderson, L. D.; Armentrout, W. P.; Balser, Dana S.; Wenger, Trey V.; Bania, T. M.; Dawson, J. R.; Mc Clure-Griffiths, N. M.

2017-01-01

The Southern H ii Region Discovery Survey is a survey of the third and fourth quadrants of the Galactic plane that will detect radio recombination line (RRL) and continuum emission at cm-wavelengths from several hundred H ii region candidates using the Australia Telescope Compact Array. The targets for this survey come from the WISE Catalog of Galactic H ii Regions and were identified based on mid-infrared and radio continuum emission. In this pilot project, two different configurations of the Compact Array Broad Band receiver and spectrometer system were used for short test observations. The pilot surveys detected RRL emission from 36 of 53 H ii region candidates, as well as seven known H ii regions that were included for calibration. These 36 recombination line detections confirm that the candidates are true H ii regions and allow us to estimate their distances.

Strategic survey framework for the Northwest Forest Plan survey and manage program.

Science.gov (United States)

Randy Molina; Dan McKenzie; Robin Lesher; Jan Ford; Jim Alegria; Richard Cutler

2003-01-01

This document outlines an iterative process for assessing the information needs for all Northwest Forest Plan (NWFP) survey and manage species, designing and implementing strategic surveys (including field surveys and other information-gathering processes), and analyzing that information for use in the NWFP annual species review and adaptive-management processes. The...

An assessment of incentive versus survey length trade-offs in a Web survey of radiologists.

Science.gov (United States)

Ziegenfuss, Jeanette Y; Niederhauser, Blake D; Kallmes, David; Beebe, Timothy J

2013-03-20

It is generally understood that shorter Web surveys and use of incentives result in higher response rates in Web surveys directed to health care providers. Less is known about potential respondent preference for reduced burden as compared to increased reward. To help elicit preference for minimized burden compared to reward for completion of a survey, we observed physician preferences for shorter Web surveys compared to incentives as well as incentive preference (small guaranteed incentive compared to larger lottery incentive) accompanying an electronic request to complete a survey. This was an observational study that accompanied a large Web survey study of radiology staff, fellows, and residents at select academic medical centers in the United States. With the request to complete the survey, potential respondents were offered three options: (1) a 10-minute Web survey with the chance to win an iPad, (2) a 10-minute Web survey with a guaranteed nominal incentive ($5 amazon.com gift card), or (3) a shorter (5-7 minute) Web survey with no incentive. A total of 254 individuals responded to the Web survey request. Overwhelmingly, individuals chose a longer survey accompanied by an incentive compared to a shorter survey with no incentive (85% compared to 15%, P<.001). Of those opting for an incentive, a small, but not significant majority chose the chance to win an iPad over a guaranteed $5 gift card (56% compared to 44%). When given the choice, radiologists preferred a reward (either guaranteed or based on a lottery) to a less burdensome survey, indicating that researchers should focus more attention at increasing perceived benefits of completing a Web survey compared to decreasing perceived burden.

Environmental Survey preliminary report

Energy Technology Data Exchange (ETDEWEB)

1988-04-01

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

Primer on Health Surveys

Directory of Open Access Journals (Sweden)

David L Nordstrom

2012-06-01

Full Text Available The aim of this paper is to introduce novice researchers to surveys as a method of data collection. It starts with the definition of a survey, its major purposes and types as well as changes in the goals surveys have helped to achieve over time. Advantages and disadvantages of surveys over population censuses and medical examinations are discussed. Approaches to questionnaire construction are introduced along with properties that questionnaires are evaluated for. Modes of administration, sample size issues, and data analysis approaches are also introduced. The primer is illustrated with examples of surveys conducted in different countries with various public health purposes.

Infrared Sky Surveys

Science.gov (United States)

Price, Stephan D.

2009-02-01

A retrospective is given on infrared sky surveys from Thomas Edison’s proposal in the late 1870s to IRAS, the first sensitive mid- to far-infrared all-sky survey, and the mid-1990s experiments that filled in the IRAS deficiencies. The emerging technology for space-based surveys is highlighted, as is the prominent role the US Defense Department, particularly the Air Force, played in developing and applying detector and cryogenic sensor advances to early mid-infrared probe-rocket and satellite-based surveys. This technology was transitioned to the infrared astronomical community in relatively short order and was essential to the success of IRAS, COBE and ISO. Mention is made of several of the little known early observational programs that were superseded by more successful efforts.

Mapping neighborhood scale survey responses with uncertainty metrics

Directory of Open Access Journals (Sweden)

Charles Robert Ehlschlaeger

2016-12-01

Full Text Available This paper presents a methodology of mapping population-centric social, infrastructural, and environmental metrics at neighborhood scale. This methodology extends traditional survey analysis methods to create cartographic products useful in agent-based modeling and geographic information analysis. It utilizes and synthesizes survey microdata, sub-upazila attributes, land use information, and ground truth locations of attributes to create neighborhood scale multi-attribute maps. Monte Carlo methods are employed to combine any number of survey responses to stochastically weight survey cases and to simulate survey cases' locations in a study area. Through such Monte Carlo methods, known errors from each of the input sources can be retained. By keeping individual survey cases as the atomic unit of data representation, this methodology ensures that important covariates are retained and that ecological inference fallacy is eliminated. These techniques are demonstrated with a case study from the Chittagong Division in Bangladesh. The results provide a population-centric understanding of many social, infrastructural, and environmental metrics desired in humanitarian aid and disaster relief planning and operations wherever long term familiarity is lacking. Of critical importance is that the resulting products have easy to use explicit representation of the errors and uncertainties of each of the input sources via the automatically generated summary statistics created at the application's geographic scale.

Evaluating integration of inland bathymetry in the U.S. Geological Survey 3D Elevation Program, 2014

Science.gov (United States)

Miller-Corbett, Cynthia

2016-09-01

Inland bathymetry survey collections, survey data types, features, sources, availability, and the effort required to integrate inland bathymetric data into the U.S. Geological Survey 3D Elevation Program are assessed to help determine the feasibility of integrating three-dimensional water feature elevation data into The National Map. Available data from wading, acoustic, light detection and ranging, and combined technique surveys are provided by the U.S. Geological Survey, National Oceanic and Atmospheric Administration, U.S. Army Corps of Engineers, and other sources. Inland bathymetric data accessed through Web-hosted resources or contacts provide useful baseline parameters for evaluating survey types and techniques used for collection and processing, and serve as a basis for comparing survey methods and the quality of results. Historically, boat-mounted acoustic surveys have provided most inland bathymetry data. Light detection and ranging techniques that are beneficial in areas hard to reach by boat, that can collect dense data in shallow water to provide comprehensive coverage, and that can be cost effective for surveying large areas with good water clarity are becoming more common; however, optimal conditions and techniques for collecting and processing light detection and ranging inland bathymetry surveys are not yet well defined.Assessment of site condition parameters important for understanding inland bathymetry survey issues and results, and an evaluation of existing inland bathymetry survey coverage are proposed as steps to develop criteria for implementing a useful and successful inland bathymetry survey plan in the 3D Elevation Program. These survey parameters would also serve as input for an inland bathymetry survey data baseline. Integration and interpolation techniques are important factors to consider in developing a robust plan; however, available survey data are usually in a triangulated irregular network format or other format compatible with

Using Linked Survey Paradata to Improve Sampling Strategies in the Medical Expenditure Panel Survey

Directory of Open Access Journals (Sweden)

Mirel Lisa B.

2017-06-01

Full Text Available Using paradata from a prior survey that is linked to a new survey can help a survey organization develop more effective sampling strategies. One example of this type of linkage or subsampling is between the National Health Interview Survey (NHIS and the Medical Expenditure Panel Survey (MEPS. MEPS is a nationally representative sample of the U.S. civilian, noninstitutionalized population based on a complex multi-stage sample design. Each year a new sample is drawn as a subsample of households from the prior year’s NHIS. The main objective of this article is to examine how paradata from a prior survey can be used in developing a sampling scheme in a subsequent survey. A framework for optimal allocation of the sample in substrata formed for this purpose is presented and evaluated for the relative effectiveness of alternative substratification schemes. The framework is applied, using real MEPS data, to illustrate how utilizing paradata from the linked survey offers the possibility of making improvements to the sampling scheme for the subsequent survey. The improvements aim to reduce the data collection costs while maintaining or increasing effective responding sample sizes and response rates for a harder to reach population.

75 FR 57263 - New Policy Announcing That Traditional Horizontal Survey Projects Performed With Terrestrial...

Science.gov (United States)

2010-09-20

... Traditional Horizontal Survey Projects Performed With Terrestrial Survey Techniques Will No Longer Be Accepted... for additional information should be directed to Mr. Mark Eckl, Observation and Analysis Division... horizontal surveys requires use of resources that are limited and will be used more appropriately elsewhere...

Primer on Health Surveys

OpenAIRE

David L Nordstrom; David L Nordstrom

2012-01-01

The aim of this paper is to introduce novice researchers to surveys as a method of data collection. It starts with the definition of a survey, its major purposes and types as well as changes in the goals surveys have helped to achieve over time. Advantages and disadvantages of surveys over population censuses and medical examinations are discussed. Approaches to questionnaire construction are introduced along with properties that questionnaires are evaluated for. Modes of administration, sam...

Recommendations for abortion surveys using the ballot-box technique Recomendações para inquéritos sobre aborto usando a técnica de urna

Directory of Open Access Journals (Sweden)

Marcelo Medeiros

2012-07-01

Full Text Available The article lists recommendations for dealing with methodological aspects of an abortion survey and makes suggestions for testing and validating the survey questionnaire. The recommendations are based on the experience of the Brazilian Abortion Survey (PNA, a random sample household survey that used the ballot-box technique and covered adult women in all urban areas of the country.O artigo lista recomendações para lidar com aspectos metodológicos de um inquérito sobre aborto e faz sugestões para testar e validar o questionário do levantamento. As recomendações baseiam-se na experiência da Pesquisa Nacional de Aborto (PNA, uma pesquisa domiciliar baseada em amostra aleatória da população urbana do Brasil que utilizou a técnica de urna.

Interpretation of aeromagnetic survey in Eurajoensalmi, Olkiluoto (2008)

International Nuclear Information System (INIS)

Oehman, I.; Ahokas, T.; Lahti, M.

2009-06-01

In 2001, Olkiluoto was selected as the site for the final disposal of spent nuclear waste in Finland. Current construction of the underground research facility, ONKALO, is occurring at the Olkiluoto site. During the past three decades, detailed geological and geophysical investigations have been carried out on Olkiluoto Island and in the Olkiluoto vicinity in order to define its bedrock properties and structures that affect the final nuclear waste disposal. In April 2008, a high resolution aeromagnetic survey was carried out in the Eurajoensalmi inlet in order to investigate the sea and coastal areas north and west of Eurajoensalmi. Measured parameter was total magnetic field. The main goal of the survey was to improve the magnetic image of Eurajoensalmi area, to locate the area's most significant magnetic features, and by magnetic modelling find the best geological explanations for them. Some preliminary lineament interpretations were also performed to compare the accuracy of location data between lineaments interpreted in earlier surveys versus the new 2008 data. Data acquired during earlier magnetic surveys was used as reference data. Interpretation was conducted using measured total magnetic field, derivatives computed from the total field and various visualisation techniques. Comparison of data from the 1988 aeromagnetic survey conducted by GTK and the 2008 survey proves that a more detailed survey configuration sharpens anomalies and increases reliability in the interpretation of subtle features. Positioning techniques have improved significantly since the 1980's, which improves positioning accuracy and increases consistency. It can be concluded that the 2008 data is significantly more detailed and brings interpretation to a new level. Four areas, including well known bedrock structures HZ21, which corresponds to brittle deformation zone OL-BFZ002, and Liikla and Selkaenummi shear zones, were modelled. Modelling was intentionally kept relatively simple using

Semi-customizing patient surveys

DEFF Research Database (Denmark)

Riiskjær, Erik; Ammentorp, Jette; Nielsen, Jørn Flohr

2011-01-01

Objective. The study investigated the needs and consequences of semi-customizing patient satisfaction surveys to low organizational levels and explored whether patient satisfaction was correlated with local organizational conditions. Design. From 1999 to 2006, the County of Aarhus carried out 398....... Establishing a link between patient satisfaction and organizational variables broadens the quality development focus to include more than simply analysis of specific questions. Semi-customizing patient surveys are recommended....... surveys during four rounds in eight hospitals. To explain differences between the wards, data on the 40 wards with the best and the 40 wards with the worst evaluations (identified by patient surveys) were compared with the data from job satisfaction surveys and management information systems. Setting...

Fiscal 1999 survey report. Survey of international cooperation over energy use rationalization techniques; 1999 nendo energy shiyo gorika shuho kokusai kyoryoku chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In the past, studies have been conducted involving the possibility of development of information offering techniques for the realization of sustainable society, for which LCA (life cycle assessment) as a tool for reducing energy consumption and environmental impact is investigated and case studies are conducted in this connection. In this fiscal year, for the purpose of deliberating how to utilize the LCA results, a survey is conducted of how LCA is being used as a tool for constructing an environmental management system set forth in the ISO14000 series, by holding conferences with LCA researchers representing the respective countries involved. Investigations are conducted into the actualities of the environmental management system, environmental performance assessment, and environmental labelling whose standardization has been under way in compliance with the ISO14000 series, into the actualities of matters relating to assessment techniques and decision making such as environmentally-friendly designing, supply chain management, reports on environments, etc., which are becoming established in enterprises, and into the actualities of access to and disclosure of information. International cooperative researches are conducted, participated in by five leading organizations of Sweden, Germany, Denmark, and Canada, and Japan's National Institute for Resources and Development, where actual states of LCA utilization are introduced and improvement on LCA techniques are discussed. (NEDO)

Fiscal 1999 survey report. Survey of international cooperation over energy use rationalization techniques; 1999 nendo energy shiyo gorika shuho kokusai kyoryoku chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In the past, studies have been conducted involving the possibility of development of information offering techniques for the realization of sustainable society, for which LCA (life cycle assessment) as a tool for reducing energy consumption and environmental impact is investigated and case studies are conducted in this connection. In this fiscal year, for the purpose of deliberating how to utilize the LCA results, a survey is conducted of how LCA is being used as a tool for constructing an environmental management system set forth in the ISO14000 series, by holding conferences with LCA researchers representing the respective countries involved. Investigations are conducted into the actualities of the environmental management system, environmental performance assessment, and environmental labelling whose standardization has been under way in compliance with the ISO14000 series, into the actualities of matters relating to assessment techniques and decision making such as environmentally-friendly designing, supply chain management, reports on environments, etc., which are becoming established in enterprises, and into the actualities of access to and disclosure of information. International cooperative researches are conducted, participated in by five leading organizations of Sweden, Germany, Denmark, and Canada, and Japan's National Institute for Resources and Development, where actual states of LCA utilization are introduced and improvement on LCA techniques are discussed. (NEDO)

Aerogeophysical survey in Olkiluoto 2009

International Nuclear Information System (INIS)

Kurimo, M.

2009-08-01

This report describes the survey operation, survey and processing methods and the deliverables of an aerogeophysical survey in Olkiluoto area in May 2009. The survey was conducted by Geological Survey of Finland (GTK). The survey aircraft was a twin-engine Twin Otter operated by Finnish Aviation Academy (SIO) and owned by Natural Environment Research Council / British Geological Survey (NERC / BGS), with whom GTK has established a joint venture called Joint Airborne-geoscience Capability (JAC). The survey was conducted in May 2009 between May 5th and May 18th. The survey consists of ten separate survey flights and two magnetic calibration flights. The survey was based in Pori airport. Survey line spacing was 50 meters and nominal survey altitude was 30 meters. Measurements were completed in May 2009, and data processing and reporting was done in June 2009. Two cesium magnetometers installed onboard the aircraft (at the left wingtip and in a nose cone) were measuring the magnetic total field intensity during the survey flights. An automatic compensation unit corrected the aircraft attitude errors in the magnetic data in real time. The four-frequency electromagnetic (EM) unit included four transmitter coils with amplifiers in right wingtip and four receiver coils in left wingtip. Frequencies were 900 Hz, 3 kHz, 14 kHz and 24.5 kHz. The gamma spectrometer with two crystal packages (total volume 42 litres) measured the 256 channel energy spectra. In addition, auxiliary parameters such as flight altitude and aircraft attitude were also recorded simultaneously. Reference ground base station was used for recording the temporal variations in the magnetic field and also reference data for post-positioning of coordinate information. In the post-processing phase, heading correction, base station correction and microlevelling procedures were applied to the magnetic data. The EM data and radiometric data were corrected with calibration coefficients and levelled. The data was

GPS satellite surveying

CERN Document Server

Leick, Alfred; Tatarnikov, Dmitry

2015-01-01

THE MOST COMPREHENSIVE, UP-TO-DATE GUIDE ON GPS TECHNOLOGY FOR SURVEYING Three previous editions have established GPS Satellite Surveying as the definitive industry reference. Now fully updated and expanded to reflect the newest developments in the field, this Fourth Edition features cutting-edge information on GNSS antennas, precise point positioning, real-time relative positioning, lattice reduction, and much more. Expert authors examine additional tools and applications, offering complete coverage of geodetic surveying using satellite technologies. The past decade has seen a major evolut

Global Positioning System (GPS) survey of Augustine Volcano, Alaska, August 3-8, 2000: data processing, geodetic coordinates and comparison with prior geodetic surveys

Science.gov (United States)

Pauk, Benjamin A.; Power, John A.; Lisowski, Mike; Dzurisin, Daniel; Iwatsubo, Eugene Y.; Melbourne, Tim

2001-01-01

Between August 3 and 8,2000,the Alaska Volcano Observatory completed a Global Positioning System (GPS) survey at Augustine Volcano, Alaska. Augustine is a frequently active calcalkaline volcano located in the lower portion of Cook Inlet (fig. 1), with reported eruptions in 1812, 1882, 1909?, 1935, 1964, 1976, and 1986 (Miller et al., 1998). Geodetic measurements using electronic and optical surveying techniques (EDM and theodolite) were begun at Augustine Volcano in 1986. In 1988 and 1989, an island-wide trilateration network comprising 19 benchmarks was completed and measured in its entirety (Power and Iwatsubo, 1998). Partial GPS surveys of the Augustine Island geodetic network were completed in 1992 and 1995; however, neither of these surveys included all marks on the island.Additional GPS measurements of benchmarks A5 and A15 (fig. 2) were made during the summers of 1992, 1993, 1994, and 1996. The goals of the 2000 GPS survey were to:1) re-measure all existing benchmarks on Augustine Island using a homogeneous set of GPS equipment operated in a consistent manner, 2) add measurements at benchmarks on the western shore of Cook Inlet at distances of 15 to 25 km, 3) add measurements at an existing benchmark (BURR) on Augustine Island that was not previously surveyed, and 4) add additional marks in areas of the island thought to be actively deforming. The entire survey resulted in collection of GPS data at a total of 24 sites (fig. 1 and 2). In this report we describe the methods of GPS data collection and processing used at Augustine during the 2000 survey. We use this data to calculate coordinates and elevations for all 24 sites surveyed. Data from the 2000 survey is then compared toelectronic and optical measurements made in 1988 and 1989. This report also contains a general description of all marks surveyed in 2000 and photographs of all new marks established during the 2000 survey (Appendix A).

UltraVISTA : a new ultra-deep near-infrared survey in COSMOS

NARCIS (Netherlands)

McCracken, H. J.; Milvang-Jensen, B.; Dunlop, J.; Franx, M.; Fynbo, J. P. U.; Le Fevre, O.; Holt, J.; Caputi, K. I.; Goranova, Y.; Buitrago, F.; Emerson, J. P.; Freudling, W.; Hudelot, P.; Lopez-Sanjuan, C.; Magnard, F.; Mellier, Y.; Moller, P.; Nilsson, K. K.; Sutherland, W.; Tasca, L.; Zabl, J.

In this paper we describe the first data release of the UltraVISTA near-infrared imaging survey of the COSMOS field. We summarise the key goals and design of the survey and provide a detailed description of our data reduction techniques. We provide stacked, sky-subtracted images in YJHK(s) and

Availability and accessibility of e-books in Nigerian libraries: a survey

African Journals Online (AJOL)

This paper investigates availability and accessibility of e-books in Nigeria Libraries. A social survey method of research was adopted for the study and the questionnaire as a research instrument was used. A systematic random sampling technique was used to determine respondents in the survey. The result shows that ...

Sea Scallop Survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The standardized NEFSC Sea Scallop Survey began in 1980 and has covered an area from Cape Hatteras to Georges Bank. The survey aims to determine the distribution and...

GIS Readiness Survey 2014

DEFF Research Database (Denmark)

Schrøder, Lise; Hvingel, Line Træholt; Hansen, Henning Sten

2014-01-01

The GIS Readiness Survey 2014 is a follow-up to the corresponding survey that was carried out among public institutions in Denmark in 2009. The present survey thus provides an updated image of status and challenges in relation to the use of spatial information, the construction of the com- mon...

Comparative Study of Complex Survey Estimation Software in ONS

Directory of Open Access Journals (Sweden)

Andy Fallows

2015-09-01

Full Text Available Many official statistics across the UK Government Statistical Service (GSS are produced using data collected from sample surveys. These survey data are used to estimate population statistics through weighting and calibration techniques. For surveys with complex or unusual sample designs, the weighting can be fairly complicated. Even in more simple cases, appropriate software is required to implement survey weighting and estimation. As with other stages of the survey process, it is preferable to use a standard, generic calibration tool wherever possible. Standard tools allow for efficient use of resources and assist with the harmonisation of methods. In the case of calibration, the Office for National Statistics (ONS has experience of using the Statistics Canada Generalized Estimation System (GES across a range of business and social surveys. GES is a SAS-based system and so is only available in conjunction with an appropriate SAS licence. Given recent initiatives and encouragement to investigate open source solutions across government, it is appropriate to determine whether there are any open source calibration tools available that can provide the same service as GES. This study compares the use of GES with the calibration tool ‘R evolved Generalized software for sampling estimates and errors in surveys’ (ReGenesees available in R, an open source statistical programming language which is beginning to be used in many statistical offices. ReGenesees is a free R package which has been developed by the Italian statistics office (Istat and includes functionality to calibrate survey estimates using similar techniques to GES. This report describes analysis of the performance of ReGenesees in comparison to GES to calibrate a representative selection of ONS surveys. Section 1.1 provides a brief introduction to the current use of SAS and R in ONS. Section 2 describes GES and ReGenesees in more detail. Sections 3.1 and 3.2 consider methods for

Statistical problems raised by data processing of food surveys

International Nuclear Information System (INIS)

Lacourly, Nancy

1974-01-01

The methods used for the analysis of dietary habits of national populations - food surveys - have been studied. S. Lederman's linear model for the estimation of the average individual consumptions from the total family diets was in the light of a food survey carried on with 250 Roman families in 1969. An important bias in the estimates thus obtained was shown out by a simulation assuming 'housewife's dictatorship'; these assumptions should contribute to set up an unbiased model. Several techniques of multidimensional analysis were therefore used and the theoretical aspect of linear regression for some particular situations had to be investigated: quasi-colinear 'independent variables', measurements with errors, positive constraints on regression coefficients. A new survey methodology was developed taking account of the new 'Integrated Information Systems', which have incidence on all the stages of a consumption survey: organization, data collection, constitution of an information bank and data processing. (author) [fr

Light Field Photography A Survey

Directory of Open Access Journals (Sweden)

M Zulkifl Hasan

2017-01-01

Full Text Available In this survey author will be discussing about light field photography its importance techniques used in it to have an excellent output from the normal cameras. Light field photography has become an emerging area due to its refocusing of digital image and 3D reconstruction. Reconstruction of image tells us about its high resolution and refocusing is used to clear the blur image.1

GDOT employee survey.

Science.gov (United States)

2017-07-04

The research team worked in collaboration with GDOT to conduct the 2016 GDOT Employee Survey. This research study aimed to increase the response rate and the usefulness of the feedback from the GDOT employee survey to support organizational decisions...

Do patient surveys work? The influence of a national survey programme on local quality-improvement initiatives.

Science.gov (United States)

Reeves, R; Seccombe, I

2008-12-01

To assess current attitudes towards the national patient survey programme in England, establish the extent to which survey results are used and identify barriers and incentives for using them. Qualitative interviews with hospital staff responsible for implementing the patient surveys (survey leads). National Health Service (NHS) hospital organisations (trusts) in England. Twenty-four patient survey leads for NHS trusts. Perceptions of the patient surveys were mainly positive and were reported to be improving. Interviewees welcomed the surveys' regular repetition and thought the questionnaires, survey methods and reporting of results, particularly inter-organisational benchmark charts, were of a good standard. The survey results were widely used in action planning and were thought to support organisational patient-centredness. There was variation in the extent to which trusts disseminated survey findings to patients, the public, staff and their board members. The most common barrier to using results was difficulty engaging clinicians because survey findings were not sufficiently specific to specialties, departments or wards. Limited statistical expertise and concerns that the surveys only covered a short time frame also contributed to some scepticism. Other perceived barriers included a lack of knowledge of effective interventions, and limited time and resources. Actual and potential incentives for using survey findings included giving the results higher weightings in the performance management system, financial targets, Payment by Results (PbR), Patient Choice, a patient-centred culture, leadership by senior members of the organisation, and boosting staff morale by disseminating positive survey findings. The national patient surveys are viewed positively, their repetition being an important factor in their success. The results could be used more effectively if they were more specific to smaller units.

Automated transient identification in the Dark Energy Survey

Energy Technology Data Exchange (ETDEWEB)

Goldstein, D. A. [Univ. of California, Berkeley, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). et al.

2015-08-20

We describe an algorithm for identifying point-source transients and moving objects on reference-subtracted optical images containing artifacts of processing and instrumentation. The algorithm makes use of the supervised machine learning technique known as Random Forest. We present results from its use in the Dark Energy Survey Supernova program (DES-SN), where it was trained using a sample of 898,963 signal and background events generated by the transient detection pipeline. After reprocessing the data collected during the first DES-SN observing season (2013 September through 2014 February) using the algorithm, the number of transient candidates eligible for human scanning decreased by a factor of 13.4, while only 1.0 percent of the artificial Type Ia supernovae (SNe) injected into search images to monitor survey efficiency were lost, most of which were very faint events. Here we characterize the algorithm's performance in detail, and we discuss how it can inform pipeline design decisions for future time-domain imaging surveys, such as the Large Synoptic Survey Telescope and the Zwicky Transient Facility.

The VLA Sky Survey

Science.gov (United States)

Lacy, Mark; VLASS Survey Team, VLASS Survey Science Group

2018-01-01

The VLA Sky Survey (VLASS), which began in September 2017, is a seven year project to image the entire sky north of Declination -40 degrees in three epochs. The survey is being carried out in I,Q and U polarization at a frequency of 2-4GHz, and a resolution of 2.5 arcseconds, with each epoch being separated by 32 months. Raw data from the survey, along with basic "quicklook" images are made freely available shortly after observation. Within a few months, NRAO will begin making available further basic data products, including refined images and source lists. In this talk I shall describe the science goals and methodology of the survey, the current survey status, and some early results, along with plans for collaborations with external groups to produce enhanced, high level data products.

Scala tympani cochleostomy I: results of a survey.

Science.gov (United States)

Adunka, Oliver F; Buchman, Craig A

2007-12-01

To assess current surgical techniques for scala tympani cochlear implantation among North American surgeons. A survey was distributed to all cochlear implant surgeons participating in the 2006 William House Cochlear Implant Study Group in Toronto, Canada. Participants were asked to anonymously identify their routine surgical practices. Images of trans-facial recess approaches to the round window and cochlear promontory were used in a multiple-choice fashion to assess the surgeon's typical exposure and cochleostomy location. Returned questionnaires were electronically processed and evaluated. Fifty-five (75%) of 73 returned surveys had adequate data validity and availability. Landmark identification and preferred cochleostomy locations varied greatly. About 20% of surgeons selected cochleostomy locations superior to the round window membrane. Cochleostomy size and location appeared to be influenced by surgical experience and whether or not the round window overhang was drilled off. This survey clearly documents marked variations in surgical techniques for scala tympani cochlear implantation. Future studies should more clearly define the surgical anatomy of this region for appropriate placement of a scala tympani cochleostomy. These findings may ultimately have an impact on hearing and neural preservation cochlear implant surgeries.

Lupus anticoagulants: first French interlaboratory Etalonorme survey.

Science.gov (United States)

Roussi, J; Roisin, J P; Goguel, A

1996-06-01

In 1994, the, French National Quality Control Group for Hematology, Etalonorme, conducted a large-scale interlaboratory survey concerning the detection of lupus anticoagulants (LA) involving all the 4,500 French laboratories. Each laboratory received the same batch of a lyophilized citrated plasma (94B3) prepared from a patient with LA that had been confirmed by all the techniques used in the intralaboratory study. In the interlaboratory survey, the screening test was activated partial thromboplastin time (APTT); mean APTT calculated from the results reported by 4,029 labs was prolonged (clotting ratio = 1.44) with a large dispersion (coefficients of variation = 18.8%). APTT of the mixture 94B3 + normal plasma were performed by 2,698 laboratories. No correction of APTT was obtained (R = 1.36, Rosner index = 24) with a wide variation between reagents (17 kaolin. This survey allowed Etalonorme to inform French biologists and draft an educational program for the biologic detection of LA and the identification of its mechanism of action.

Long-Period Exoplanets from Photometric Transit Surveys

Science.gov (United States)

Osborn, Hugh

2017-10-01

Photometric transit surveys on the ground & in space have detected thousands of transiting exoplanets, typically by analytically combining the signals from multiple transits. This technique of exoplanet detection was exploited in K2 to detect nearly 200 candidate planets, and extensive follow-up was able to confirm the planet K2-110b as a 2.6±0.1R⊕, 16.7±3.2M⊙ planet on a 14d orbit around a K-dwarf. The ability to push beyond the time limit set by transit surveys to detect long-period transiting objects from a single eclipse was also studied. This was performed by developing a search technique to search for planets around bright stars in WASP and NGTS photometry, finding NGTS to be marginally better than WASP at detecting such planets with 4.14±0.16 per year compared to 1.43±0.15, and detecting many planet candidates for which follow-up is on-going. This search was then adapted to search for deep, long-duration eclipses in all WASP targets. The results of this survey are described in this thesis, as well as detailed results for the candidate PDS-110, a young T-Tauri star which exhibited ∼20d-long, 30%-deep eclipses in 2008 and 2011. Space-based photometers such as Kepler have the precision to identify small exoplanets and eclipsing binary candidates from only a single eclipse. K2, with its 75d campaign duration and high-precision photometry, is not only ideally suited to detect significant numbers of single-eclipsing objects, but also to characterise them from a single event. The Bayesian transit-fitting tool ("Namaste: An MCMC Analysis of Single Transit Exoplanets") was developed to extract planetary and orbital information from single transits, and was applied to 71 candidate events detected in K2 photometry. The techniques developed in this thesis are highly applicable to future transit surveys such as TESS & PLATO, which will be able to discover & characterise large numbers of long period planets in this way

Survey on Multimedia Technologies for Mobile Learning Applications

Directory of Open Access Journals (Sweden)

Paul POCATILU

2009-01-01

Full Text Available Mobile technologies are developing very fast. This paper presents a survey on multimedia technologies for mobile learning applications, focusing on multimedia programming techniques for Windows Mobile, Symbian, and Java ME.

Aerial radiological survey of the Brookhaven National Laboratory and surrounding area, Upton, New York. Date of survey: June 1983

International Nuclear Information System (INIS)

Hobaugh, J.L.

1985-02-01

An aerial radiological survey was performed from 11 to 13 June 1983, over approximately a 64-square-kilometer (25-square-mile) area surrounding the Brookhaven National Laboratory (BNL). BNL is located in the center of Suffolk County, Long Island, New York. All gamma radiation data were collected by flying east-west lines spaced 76 meters (250 feet) apart at an altitude of 46 meters (150 feet) above ground level. Count rates obtained from the aerial platform were converted to exposure rates at 1 meter above the ground. The average background exposure rate in the survey area ranged from 5 to 10 microroentgens per hour (μR/h). The reported exposure rate values include an estimated cosmic ray contribution of 4.0 μR/h. Ground-based measurements made during the same time period were compared to the aerial survey results. Pressurized ion chamber readings and soil samples were taken from two locations within the aerial survey boundaries. Exposure rate values obtained from these measurement techniques were in agreement with those obtained from the aerial data. A total of 23 areas of man-made radioactivity were identified. The dominant isotopes found over these areas were cesium-137, sodium-22, manganese-54, and cobalt-60. A similar survey was conducted in May 1980. The 1983 survey results were similar to the 1980 results. Three areas of low level man-made activity were not reproduced by the 1983 data. Ten new areas were detected. The major difference occurred because of the increased sensitivity and spatial reduction brought on by lowering the altitude and decreasing the line spacing. 8 refs., 28 figs., 4 tabs

Conducting Surveys and Data Collection: From Traditional to Mobile and SMS-based Surveys

Directory of Open Access Journals (Sweden)

Iftikhar Alam

2014-08-01

Full Text Available Fresh, bias-free and valid data collected using different survey modes is considered an essential requirement for smooth functioning and evolution of an organization. Surveys play a major role in making in-time correct decisions and generating reports. The aim of this study is to compare and investigate state-of-the-art in different survey modes including print, email, online, mobile and SMS-based surveys. Results indicated that existing methods are neither complete nor sufficient to fulfil the overall requirements of an organization which primarily rely on surveys. Also, it shows that SMS is a dominant method for data collection due to its pervasiveness. However, existing SMS-based data collection has limitations like limited number of characters per SMS, single question per SMS and lake of multimedia support. Recent trends in data collection emphasis on data collection applications for smart phones. However, in developing countries low-end mobile devices are still extensively used which makes the data collection difficult from man in the street. The paper conclude that existing survey modes and methods should be improved to get maximum responses quickly in low cost manner. The study has contributed to the area of surveying and data collection by analysing different factors such as cost, time and response rate. The results of this study can help practitioners in creating a more successful surveying method for data collection that can be effectively used for low budget projects in developed as well as developing countries.

School Leavers' Survey Report 2007

OpenAIRE

Byrne, Delma; McCoy, Selina; Watson, Dorothy

2008-01-01

Since the late 1970s the Economic and Social Research Institute has conduced research on recent school leavers in the Republic of Ireland on behalf of various government departments. The School Leavers’ Survey has been in existence since it first surveyed young people who left the second-level education system in the academic year 1978/1979. Since its inception, 24 surveys in all have been carried out either on a yearly or bi-yearly basis, until the most recent survey which survey...

Assessment of health surveys: fitting a multidimensional graded response model.

Science.gov (United States)

Depaoli, Sarah; Tiemensma, Jitske; Felt, John M

The multidimensional graded response model, an item response theory (IRT) model, can be used to improve the assessment of surveys, even when sample sizes are restricted. Typically, health-based survey development utilizes classical statistical techniques (e.g. reliability and factor analysis). In a review of four prominent journals within the field of Health Psychology, we found that IRT-based models were used in less than 10% of the studies examining scale development or assessment. However, implementing IRT-based methods can provide more details about individual survey items, which is useful when determining the final item content of surveys. An example using a quality of life survey for Cushing's syndrome (CushingQoL) highlights the main components for implementing the multidimensional graded response model. Patients with Cushing's syndrome (n = 397) completed the CushingQoL. Results from the multidimensional graded response model supported a 2-subscale scoring process for the survey. All items were deemed as worthy contributors to the survey. The graded response model can accommodate unidimensional or multidimensional scales, be used with relatively lower sample sizes, and is implemented in free software (example code provided in online Appendix). Use of this model can help to improve the quality of health-based scales being developed within the Health Sciences.

The Gemini Planet Imager Exoplanet Survey

Science.gov (United States)

Macintosh, Bruce

The Gemini Planet Imager (GPI) is a next-generation coronagraph constructed for the Gemini Observatory. GPI will see first light this fall. It will be the most advanced planet-imaging system in operation - an order of magnitude more sensitive than any current instrument, capable of detecting and spectroscopically characterizing young Jovian planets 107 times fainter than their parent star at separations of 0.2 arcseconds. GPI was built from the beginning as a facility-class survey instrument, and the observatory will employ it that way. Our team has been selected by Gemini Observatory to carry out an 890-hour program - the GPI Exoplanet Survey (GPIES) campaign from 2014-2017. We will observe 600 stars spanning spectral types A-M. We will use published young association catalogs and a proprietary list in preparation that adds several hundred new young (pc) and adolescent (pc) stars. The range of separations studied by GPI is completely inaccessible to Doppler and transit techniques (even with Kepler or TESS)— GPI offers a new window into planet formation. We will use GPI to produce the first-ever robust census of giant planet populations in the 5-50 AU range, allowing us to: 1) illuminate the formation pathways of Jovian planets; 2) reconstruct the early dynamical evolution of systems, including migration mechanisms and the interaction with disks and belts of debris; and 3) bridge the gap between Jupiter and the brown dwarfs with the first examples of cool low- gravity planetary atmospheres. Simulations predict this survey will discover approximately 50 exoplanets, increasing the number of exoplanet images by an order of magnitude, enough for statistical investigation. This Origins of Solar Systems proposal will support the execution of the GPI Exoplanet Survey campaign. We will develop tools needed to execute the survey efficiently. We will refine the existing GPI data pipeline to a final version that robustly removes residual speckle artifacts and provides

Analysis of Employee's Survey for Preventing Human-Errors

International Nuclear Information System (INIS)

Sung, Chanho; Kim, Younggab; Joung, Sanghoun

2013-01-01

Human errors in nuclear power plant can cause large and small events or incidents. These events or incidents are one of main contributors of reactor trip and might threaten the safety of nuclear plants. To prevent human-errors, KHNP(nuclear power plants) introduced 'Human-error prevention techniques' and have applied the techniques to main parts such as plant operation, operation support, and maintenance and engineering. This paper proposes the methods to prevent and reduce human-errors in nuclear power plants through analyzing survey results which includes the utilization of the human-error prevention techniques and the employees' awareness of preventing human-errors. With regard to human-error prevention, this survey analysis presented the status of the human-error prevention techniques and the employees' awareness of preventing human-errors. Employees' understanding and utilization of the techniques was generally high and training level of employee and training effect on actual works were in good condition. Also, employees answered that the root causes of human-error were due to working environment including tight process, manpower shortage, and excessive mission rather than personal negligence or lack of personal knowledge. Consideration of working environment is certainly needed. At the present time, based on analyzing this survey, the best methods of preventing human-error are personal equipment, training/education substantiality, private mental health check before starting work, prohibit of multiple task performing, compliance with procedures, and enhancement of job site review. However, the most important and basic things for preventing human-error are interests of workers and organizational atmosphere such as communication between managers and workers, and communication between employees and bosses

Borehole television survey

International Nuclear Information System (INIS)

Lau, J.S.O.

1980-01-01

The borehole television survey can provide a measure of the orientation, depth, width and aperture of any planar discontinuity intersected by a borehole and a technique is in an advanced stage of development by the Geological Survey of Canada (GSC) to make such measurements. Much of its practical application to date has been in crystalline rocks (plutons) at research areas pertaining to the Nuclear Waste Disposal Program in Canada. It also has many other engineering applications where bedrock stability is of particular concern. The equipment required to carry out the survey can be readily transported by two panel trucks with trailers. The components consist of a camera probe, control unit, cable storage reel, cable drive, video-tape recorder, TV monitor and two electrical generators. An inclined planar structure intersected by a borehole appears as an elliptical trace on the wall of the borehole. Such an intersection line shows on the TV monitor as a sinusoidal curve with a high point and a low point as the camera rotates through an angle of 360 degrees. The azimuth of the low point, measured by a compass in the camera probe, represents the direction of the dip of the planar structure. The angle of dip is measured midway between the high and low points or is computed from the maximum-to-minimum distance of the sinusoid and the hole diameter. These observations provide the true orientation of the planar structure if the borehole is vertical. However, if the borehole is inclined, direct observations will only provide the apparent orientation. The true orientation must thus be obtained either by means of stereographic projection or spherical trigonometry. A computer program has been written to calculate the true orientation from the apparent orientation. In the field, observation data are recorded directly on a data record sheet for keypunching and input into the computer

Quarry Haul Road Ecological Survey

International Nuclear Information System (INIS)

1992-09-01

This biological survey was performed to document the summer flora and fauna found along the haul road constructed as part of the remedial action for the quarry bulk waste. State and Federal species listed as threatened or endangered were noted if encountered while surveying. Sampling locations were equally spaced along the quarry haul road, and a survey for vegetation and birds conducted at each location. Bird observations were conducted as breeding bird surveys once in June of 1991, and again in June of 1992. Each year's survey includes two observations in the early morning and one late in the evening. Vegetation surveys were conducted in 1991 using quadrants and transects. mammal, reptile, and amphibian sightings were noted as encountered

GPR as a Low Impact Paleontogical Survey Technique

Science.gov (United States)

Sturdevant, G. C.; Leverence, R.; Stewart, R.

2013-12-01

The Deweyville Formation, a Pleistocene fluvial sandstone, is a prolific source of megafaunal fossils from periods of low stand environmental conditions. GPR was employed in an environmentally sensitive area in close proximity to a salt dome in Northwest Harris County, Texas as a method of evaluating the probable paleo-depositional environment and to prospect for potential further site development of two distinct fossiliferous zones. The primary zone of interest is a lag gravel bounded sand responsible for producing a regionally unique fossil assemblage including South American megafauna (Lundelius et al, 2013). The secondary zone of interest contains undisturbed mammoth remains housed in coarse white sand emplaced on top of a clay drape which has been hypothesized to represent an oxbow lake formed by the meandering paleo-Brazos river. With an accurate map of the paleo-channel planning future activity can focus on maximizing fossil recovery and minimizing site impact. Pulse EKKO 250 MHz, 400MHz, and 1GHz system was employed in a prospect area proximal to the secondary site to calibrate and evaluate these systems for their resolution and penetration depth in the modern sediments. The data was processed using EKKO Mapper and EKKO View Deluxe software packages, 3d volumes were produced and sliced. Preliminary results from the 250 MHz demonstrate successful imaging of the sand-clay interface. After these surveys were run a small portion of the site was excavated to confirm the estimated velocities, the observed anomalies, and refine our modeling and interpretation, and improve grid design for further surveys. It was confirmed that the sand-clay interface was easily observable using GPR, however the grid spacing proved to be too wide, leading to artifacts in the 3d volume produced.

Explaining discrepancies in reproductive health indicators from population-based surveys and exit surveys: a case from Rwanda.

Science.gov (United States)

Meekers, D; Ogada, E A

2001-06-01

Reproductive health programmes often need exit surveys and population-based surveys for monitoring and evaluation. This study investigates why such studies produce discrepant estimates of condom use, sexual behaviour and condom brand knowledge, and discusses the implications for future use of exit surveys for programme monitoring. Logistic regression is used to explain differences between a household survey of 1295 persons and an exit survey among a random sample of 2550 consumers at retail outlets in RWANDA: Discrepancies in ever use of condoms and risky sexual behaviours are due to differences in socioeconomic status of the two samples. After controls, exit surveys at most outlet types have the same results as the household survey. Only exit surveys at bars, nightclubs and hotels yield significantly different estimates. However, the above-average knowledge of Prudence Plus condoms in the exit interviews is not attributable to socioeconomic or demographic variables, most likely because respondents have seen the product at the outlets. Information about condom use and sexual behaviour obtained from exit surveys appears as accurate as that obtained through household surveys. Nevertheless, exit surveys must be used cautiously. Because exit surveys may include wealthier and better-educated respondents, they are not representative of the general population. The composition of exit survey samples should be validated through existing household surveys. Comparisons across survey types are generally unadvisable, unless they control for sample differences. When generalizing to the population at large is not needed (e.g. for studies aimed at identifying the characteristics and behaviour of users of particular products or services), exit surveys can provide an appropriate alternative to household surveys.

Aerial radiological surveys of Steed Pond, Savannah River Site: Dates of surveys, 1984--1989

International Nuclear Information System (INIS)

Fritzsche, A.E.; Jobst, J.E.

1993-09-01

From June 1984 to August 1985, three aerial radiological surveys were conducted over Steed Pond at the Savannah River Site in South Carolina. In addition, Steed Pond was included in larger-area surveys of the Savannah River Site in subsequent years. The surveys were conducted by the Remote Sensing Laboratory of EG ampersand G Energy Measurements, Inc., Las Vegas, Nevada, for the US Department of Energy. Airborne measurements were obtained for both natural and man-made gamma radiation over Steed Pond and surrounding areas. The first survey was conducted when the pond was filled to normal capacity for the time of the year. On September 1, 1984, the Steed Pond dam spillway failed causing the pond to drain. The four subsequent surveys were conducted with the pond drained. The second survey and the third were conducted to study silt deposits exposed by the drop in water level after the spillway's opening. Steed Pond data from the February 1987 and April 1989 Savannah River Site surveys have been included to bring this study up to date

Our Surveys & Programs

Science.gov (United States)

Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

Pseudo-populations a basic concept in statistical surveys

CERN Document Server

Quatember, Andreas

2015-01-01

This book emphasizes that artificial or pseudo-populations play an important role in statistical surveys from finite universes in two manners: firstly, the concept of pseudo-populations may substantially improve users’ understanding of various aspects in the sampling theory and survey methodology; an example of this scenario is the Horvitz-Thompson estimator. Secondly, statistical procedures exist in which pseudo-populations actually have to be generated. An example of such a scenario can be found in simulation studies in the field of survey sampling, where close-to-reality pseudo-populations are generated from known sample and population data to form the basis for the simulation process. The chapters focus on estimation methods, sampling techniques, nonresponse, questioning designs and statistical disclosure control.This book is a valuable reference in understanding the importance of the pseudo-population concept and applying it in teaching and research.

Galaxy morphologies in the era of big-data surveys

Science.gov (United States)

Huertas-Company, M.

Galaxy morphology is a first-order descriptor of a galaxy and a useful proxy to identify physical processes. The 100 years old Hubble fork describes the structural diversity of galaxies in the local universe. Unveiling the origins of this galaxy zoology is a key challenge in galaxy evolution. In this review talk, I first summarized some key advances in our understanding of the morphological evolution of galaxies from z ~ 0 to z ~ 3, thank you in particular to the SDSS and HST legacies. In the second part, I focused on the classification techniques. With the emergence in the last years of large surveys the samples of study have increased by several orders of magnitude going from a few tens to several millions of objects. This trend will clearly continue in the next decade with coming surveys/missions such as EUCLID and WFIRST. While galaxy classification is still a required step in any survey, visual inspection of galaxies is becoming prohibitively time-consuming. Under these circumstances, the techniques used to estimate galaxy morphologies need to be updated.

75 FR 35289 - International Services Surveys: BE-180, Benchmark Survey of Financial Services Transactions...

Science.gov (United States)

2010-06-22

...-AA73 International Services Surveys: BE-180, Benchmark Survey of Financial Services Transactions Between U.S. Financial Services Providers and Foreign Persons AGENCY: Bureau of Economic Analysis... Survey of Financial Services Transactions between U.S. Financial Services Providers and Foreign Persons...

Residential Energy Consumption Survey: Quality Profile

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

75 FR 10704 - International Services Surveys: BE-180, Benchmark Survey of Financial Services Transactions...

Science.gov (United States)

2010-03-09

...] RIN 0691-AA73 International Services Surveys: BE-180, Benchmark Survey of Financial Services Transactions Between U.S. Financial Services Providers and Foreign Persons AGENCY: Bureau of Economic Analysis... BE-180, Benchmark Survey of Financial Services Transactions between U.S. Financial Services Providers...

Survey of Tokamak experiments

International Nuclear Information System (INIS)

Bickerton, R.J.

1977-01-01

The survey covers the following topics:- Introduction and history of tokamak research; review of tokamak apparatus, existing and planned; remarks on measurement techniques and their limitations; main results in terms of electron and ion temperatures, plasma density, containment times, etc. Empirical scaling; range of operating densities; impurities, origin, behaviour and control (including divertors); data on fluctuations and instabilities in tokamak plasmas; data on disruptive instabilities; experiments on shaped cross-sections; present experimental evidence on β limits; auxiliary heating; experimental and theoretical problems for the future. (author)

Survey of photovoltaic systems

Energy Technology Data Exchange (ETDEWEB)

1979-08-01

In developing this survey of photovoltaic systems, the University of Alabama in Huntsville assembled a task team to perform an extensive telephone survey of all known photovoltaic manufacturers. Three US companies accounted for 77% of the total domestic sales in 1978. They are Solarex Corporation, Solar Power Croporation, and ARCO Solar, Inc. This survey of solar photovoltaic (P/V) manufacturers and suppliers consists of three parts: a catalog of suppliers arranged alphabetically, data sheets on specific products, and typical operating, installation, or maintenance instructions and procedures. This report does not recommend or endorse any company product or information presented within as the results of this survey.

Search Techniques for the Web of Things: A Taxonomy and Survey

Science.gov (United States)

Zhou, Yuchao; De, Suparna; Wang, Wei; Moessner, Klaus

2016-01-01

The Web of Things aims to make physical world objects and their data accessible through standard Web technologies to enable intelligent applications and sophisticated data analytics. Due to the amount and heterogeneity of the data, it is challenging to perform data analysis directly; especially when the data is captured from a large number of distributed sources. However, the size and scope of the data can be reduced and narrowed down with search techniques, so that only the most relevant and useful data items are selected according to the application requirements. Search is fundamental to the Web of Things while challenging by nature in this context, e.g., mobility of the objects, opportunistic presence and sensing, continuous data streams with changing spatial and temporal properties, efficient indexing for historical and real time data. The research community has developed numerous techniques and methods to tackle these problems as reported by a large body of literature in the last few years. A comprehensive investigation of the current and past studies is necessary to gain a clear view of the research landscape and to identify promising future directions. This survey reviews the state-of-the-art search methods for the Web of Things, which are classified according to three different viewpoints: basic principles, data/knowledge representation, and contents being searched. Experiences and lessons learned from the existing work and some EU research projects related to Web of Things are discussed, and an outlook to the future research is presented. PMID:27128918

A Survey of Provably Secure Searchable Encryption

NARCIS (Netherlands)

Bösch, C.T.; Hartel, Pieter H.; Jonker, Willem; Peter, Andreas

We survey the notion of provably secure Searchable Encryption (SE) by giving a complete and comprehensive overview of the two main SE techniques: Searchable Symmetric Encryption (SSE) and Public Key Encryption with Keyword Search (PEKS). Since the pioneering work of Song, Wagner and Perrig (IEEE S&P

Aeromagnetic survey in Eurajoensalmi, Olkiluoto 2008

International Nuclear Information System (INIS)

Levaeniemi, H.

2008-08-01

This report describes the survey operation, survey and processing methods and the deliverables of an aerogeophysical survey in Olkiluoto area in April 2008. The survey was conducted by Geological Survey of Finland (GTK). The survey aircraft was a twin-engine Twin Otter operated by Finnish Aviation Academy (SIO) and owned by Natural Environment Research Council / British Geological Survey (NERC / BGS), with whom GTK has established a joint venture called Joint Airborne-geoscience Capability (JAC). The survey was conducted in April 2008 during six days. The survey consists of six separate survey flights, one of which was a magnetic calibration flight. The survey was based in Pori airport. Survey line spacing was 50 meters and nominal survey altitude was 30 meters. Measurements were completed in April 2008, and data processing and reporting was done in June 2008. Two cesium magnetometers installed onboard the aircraft (at the left wingtip and in a nose cone) were measuring the magnetic total field intensity during the survey flights. An automatic compensation unit corrected the aircraft attitude errors in the magnetic data in real time. In addition to magnetic measurement, auxiliary parameters such as flight altitude and aircraft attitude were also recorded simultaneously. Reference ground base station was used for recording the temporal variations in the magnetic field and also reference data for post-positioning of coordinate information. In the post-processing phase, heading correction, base station correction and microlevelling procedures were applied to the magnetic data. The data was exported to numeric XYZ files and interpolated into grid data file. A noteworthy local detail present in the survey and in the processing was the massive power line. For safety reasons, flight altitude had to be increased and survey lines had to be cut short in the vicinity of the powerline. However, due to reasonable planning of the survey area boundaries, this caused no great

Vehicle-borne survey techniques for background radiations

International Nuclear Information System (INIS)

Minato, Susumu

1995-01-01

This paper presented methods for converting count rates measured inside cars and trains in the natural environment into outdoor terrestrial gamma-ray dose rates. First, (1) the method of calibration for a survey meter is described to be applicable to various geological terrains. Next, the regression formulas were acquired experimentally to correct (2) the shielding effects of cars and trains, and (3) the influence of pavements and ballasts. Furthermore, (4) a new method for removing interfering radiation components emitted from cliffs and tunnels was proposed, and the errors in the calculations were evaluated with numerical experiments. In addition, the degree of influence from the cliff was represented with the angle of elevation subtended to the detector. For the items (2)-(4), in particular, it could be explained with simple models that those methods are reasonable. The method for evaluating simply and accurately cosmic-ray dose rates by means of a portable barometer was also described. (author)

Democratic Values and Support for Militancy: Evidence from a National Survey of Pakistan

Science.gov (United States)

2011-06-14

our survey provides prima facie evidence that this technique reduced respondents’ concerns about reporting sensitive information.18 That the...the empirical underpinnings of popular support for militancy, researchers have a duty to minimize risk to all survey participants and enumerators

The Study of Aeromagnetic Surveys in Taiwan

Science.gov (United States)

Li, P. T.; Tong, L. T.; Lin, W.; Chang, S. F.

2016-12-01

The airborne magnetic survey is a cost-effective method for regional geological investigation. Most of developed countries use aeromagnetic data as important fundamental information for resources development. The first aeromagnetic survey was conducted in the offshore areas of west and southern Taiwan in 1968 by U.S. Naval Oceanographic Office to help Taiwan finding oil. Later, in 2007, a helicopter-borne magnetic survey was proceed in east Taiwan for underground granite bodies. In order to improve better understanding of deep geological structures associated with the Holocene volcanism in Taiwan, we applied helicopter-borne magnetic technique in northern Taiwan include Tatun Volcano Group (TVG) and Kueishan island in 2013 and 2014 to obtain the distribution information of potential magma chamber as well as hydrothermal pathways along regional geological structures. The most important findings of the high-resolution aeromagnetic dataset since 1960's to 2014 acquired include: (1) the distribution of subsurface igneous rocks and the Curie point depth in Tatun Volcano Group, Keelung Volcano Group, and Kueishantao Volcano; (2) the widely distributed NE high-magnetic belts in northern Taiwan may be associated with NE fractures created by long-term subsidence in this area; (3) the high-magnetic belts in south of Lanyang River which is very different from the magnetic characteristics of the Central Range may imply paleo oceanic plate; (4) the NE high-magnetic belts in Penghu area formed by magma intrusion along NE fractures and the dense and high-magnetic anomalies may be associated with the Miocene basaltic lava overlying on the pre-Tertiary igneous dykes and are widely spread in northern Penghu area. The new aeromagnetic survey techniques help us to investigate the areas with steep terrain or covered by dense vegetation which was difficult to obtain reasonable geological understanding, and also provide an opportunity for us to apply the geothermal energy prospecting.

PEP surveying procedures and equipment

International Nuclear Information System (INIS)

Linker, F.

1982-06-01

The PEP Survey and Alignment System, which employs both laser-based and optical survey methods, is described. The laser is operated in conjunction with the Tektronix 4051 computer and surveying instruments such as ARM and SAM, system which is designed to automate data input, reduction, and production of alignment instructions. The laser system is used when surveying ring quadrupoles, main bend magnets, sextupoles, and is optional when surveying RF cavities and insertion quadrupoles. Optical methods usually require that data be manually entered into the computer for alignment, but in some cases, an element can be aligned using nominal values of fiducial locations without use of the computer. Optical surveying is used in the alignment of NIT and SIT, low field bend magnets, wigglers, RF cavities, and insertion quadrupoles

Telephony user survey

CERN Multimedia

IT Department

2016-01-01

Let us know your needs to better plan the transition to a new CERN telephony system.   CERN is planning to upgrade its telephony network and replace the system with a new and modern VoIP infrastructure. We strive to make this transition as beneficial and smooth as possible for you. Please let us know more about your current working environment, expectations and suggestions by responding to this survey: https://cern.ch/tel-survey. The more answers we get, the better the new system will serve everyone in the future. The survey will take you about five minutes to complete; we are counting on your feedback!

AERIAL RADIOLOGICAL SURVEYS

International Nuclear Information System (INIS)

Proctor, A.E.

1997-01-01

Measuring terrestrial gamma radiation from airborne platforms has proved to be a useful method for characterizing radiation levels over large areas. Over 300 aerial radiological surveys have been carried out over the past 25 years including U.S. Department of Energy (DOE) sites, commercial nuclear power plants, Formerly Utilized Sites Remedial Action Program/Uranium Mine Tailing Remedial Action Program (FUSRAP/UMTRAP) sites, nuclear weapons test sites, contaminated industrial areas, and nuclear accident sites. This paper describes the aerial measurement technology currently in use by the Remote Sensing Laboratory (RSL) for routine environmental surveys and emergency response activities. Equipment, data-collection and -analysis methods, and examples of survey results are described

Benthic Photo Survey: Software for Geotagging, Depth-tagging, and Classifying Photos from Survey Data and Producing Shapefiles for Habitat Mapping in GIS

Directory of Open Access Journals (Sweden)

Jared Kibele

2016-03-01

Full Text Available Photo survey techniques are common for resource management, ecological research, and ground truthing for remote sensing but current data processing methods are cumbersome and inefficient. The Benthic Photo Survey (BPS software described here was created to simplify the data processing and management tasks associated with photo surveys of underwater habitats. BPS is free and open source software written in Python with a QT graphical user interface. BPS takes a GPS log and jpeg images acquired by a diver or drop camera and assigns the GPS position to each photo based on time-stamps (i.e. geotagging. Depth and temperature can be assigned in a similar fashion (i.e. depth-tagging using log files from an inexpensive consumer grade depth / temperature logger that can be attached to the camera. BPS provides the user with a simple interface to assign quantitative habitat and substrate classifications to each photo. Location, depth, temperature, habitat, and substrate data are all stored with the jpeg metadata in Exchangeable image file format (Exif. BPS can then export all of these data in a spatially explicit point shapefile format for use in GIS. BPS greatly reduces the time and skill required to turn photos into usable data thereby making photo survey methods more efficient and cost effective. BPS can also be used, as is, for other photo sampling techniques in terrestrial and aquatic environments and the open source code base offers numerous opportunities for expansion and customization.

An automated radiological survey method for performing site remediation and decommissioning

International Nuclear Information System (INIS)

Handy, R.G.; Bolch, W.E.; Harder, G.F.; Tolaymat, T.M.

1994-01-01

A portable, computer-based method of performing environmental monitoring and assessment for site remediation and decommissioning has been developed. The integrated system has been developed to provide for survey time reductions and real-time data analysis. The technique utilizes a notebook 486 computer with the necessary hardware and software components that makes it possible to be used in an almost unlimited number of environmental monitoring and assessment scenarios. The results from a pilot, open-quotes hide-and-seekclose quotes gamma survey and an actual alpha decontamination survey were elucidated. It was found that a open-quotes hide-and-seekclose quotes survey could come up with timely and accurate conclusions about the position of the source. The use of the automated system in a Th-232 alpha survey resulted in a reduction in the standard time necessary to do a radiological survey. In addition, the ability to analyze the data on-site allowed for identification and location of areas which needed further decontamination. Finally, a discussion on possible future improvements and field conclusions was made

2012 Mask Industry Survey

Science.gov (United States)

Malloy, Matt; Litt, Lloyd C.

2012-11-01

A survey supported by SEMATECH and administered by David Powell Consulting was sent to semiconductor industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. 2012 marks the 11th consecutive year for the mask industry survey. This year's survey and reporting structure are similar to those of the previous years with minor modifications based on feedback from past years and the need to collect additional data on key topics. Categories include general mask information, mask processing, data and write time, yield and yield loss, delivery times, and maintenance and returns. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. Results, initial observations, and key comparisons between the 2011 and 2012 survey responses are shown here, including multiple indications of a shift towards the manufacturing of higher end photomasks.

Engineering surveying

CERN Document Server

Schofield, W

2007-01-01

Engineering surveying involves determining the position of natural and man-made features on or beneath the Earth's surface and utilizing these features in the planning, design and construction of works. It is a critical part of any engineering project. Without an accurate understanding of the size, shape and nature of the site the project risks expensive and time-consuming errors or even catastrophic failure.Engineering Surveying 6th edition covers all the basic principles and practice of this complex subject and the authors bring expertise and clarity. Previous editions of this classic text have given readers a clear understanding of fundamentals such as vertical control, distance, angles and position right through to the most modern technologies, and this fully updated edition continues that tradition.This sixth edition includes:* An introduction to geodesy to facilitate greater understanding of satellite systems* A fully updated chapter on GPS, GLONASS and GALILEO for satellite positioning in surveying* Al...

IT User Community Survey

CERN Document Server

Peter Jones (IT-CDA-WF)

2016-01-01

IT-CDA is gathering information to more accurately form a snapshot of the CERN IT user community and we would appreciate you taking time to complete the following survey.   We want to use this survey to better understand how the user community uses their devices and our services, and how the delivery of those services could be improved. You will need to authenticate to complete the survey. However please note that your responses are confidential and will be compiled together and analysed as a group. You can also volunteer to offer additional information if you so wish. This survey should take no longer than 5 minutes. Thanks in advance for your collaboration.

GASS: THE PARKES GALACTIC ALL-SKY SURVEY. I. SURVEY DESCRIPTION, GOALS, AND INITIAL DATA RELEASE

International Nuclear Information System (INIS)

McClure-Griffiths, N. M.; Calabretta, M. R.; Ford, H. Alyson; Newton-McGee, K.

2009-01-01

The Parkes Galactic All-Sky Survey (GASS) is a survey of Galactic atomic hydrogen (H I) emission in the Southern sky covering declinations δ ≤ 1 0 using the Parkes Radio Telescope. The survey covers 2π steradians with an effective angular resolution of ∼16', at a velocity resolution of 1.0 km s -1 , and with an rms brightness temperature noise of 57 mK. GASS is the most sensitive, highest angular resolution survey of Galactic H I emission ever made in the Southern sky. In this paper, we outline the survey goals, describe the observations and data analysis, and present the first-stage data release. The data product is a single cube at full resolution, not corrected for stray radiation. Spectra from the survey and other data products are publicly available online.

Remote sensing, airborne radiometric survey and aeromagnetic survey data processing and analysis

International Nuclear Information System (INIS)

Dong Xiuzhen; Liu Dechang; Ye Fawang; Xuan Yanxiu

2009-01-01

Taking remote sensing data, airborne radiometric data and aero magnetic survey data as an example, the authors elaborate about basic thinking of remote sensing data processing methods, spectral feature analysis and adopted processing methods, also explore the remote sensing data combining with the processing of airborne radiometric survey and aero magnetic survey data, and analyze geological significance of processed image. It is not only useful for geological environment research and uranium prospecting in the study area, but also reference to applications in another area. (authors)

Interim status of the Texas uranium survey experiment

International Nuclear Information System (INIS)

Jupiter, C.; Wollenberg, H.

1974-01-01

The objective of the Texas uranium survey experiment is to evaluate an improved method for prospecting for uranium by determining correlations among (a) geologic analysis, (b) soil sample radiochemical analysis, (c) aerial radiometric data, (d) aerial infrared scans, and (e) aerophotographic data. Although aerial radiometric measurements have been used previously in mineral prospecting, the development of useful correlative techniques based on analysis of data from large terrestrial areas employing the five parameters (a through e, above) remains to be evaluated, and could be of significant value to the need for establishing uranium resource pools to meet the nation's energy crisis. The Texas uranium survey field experiment began on June 13, 1973, employing a Martin-404 aircraft to fly gamma-ray recording equipment at a 500-ft altitude over two areas in southeast Texas. The areas surveyed are referred to as the Dubose area (approximately 120 sq. miles) and the Clay West area (approximately 24 sq. miles). This document briefly summarizes the work which has been done, describes the kind and quality of calibrations and data analysis carried out thus far and outlines recommended additional work which would bring the experiment to some degree of completion, providing a basis for evaluating the techniques

Assessing Caribbean Shallow and Mesophotic Reef Fish Communities Using Baited-Remote Underwater Video (BRUV) and Diver-Operated Video (DOV) Survey Techniques

Science.gov (United States)

Macaya-Solis, Consuelo; Exton, Dan A.; Gress, Erika; Wright, Georgina; Rogers, Alex D.

2016-01-01

Fish surveys form the backbone of reef monitoring and management initiatives throughout the tropics, and understanding patterns in biases between techniques is crucial if outputs are to address key objectives optimally. Often biases are not consistent across natural environmental gradients such as depth, leading to uncertainty in interpretation of results. Recently there has been much interest in mesophotic reefs (reefs from 30–150 m depth) as refuge habitats from fishing pressure, leading to many comparisons of reef fish communities over depth gradients. Here we compare fish communities using stereo-video footage recorded via baited remote underwater video (BRUV) and diver-operated video (DOV) systems on shallow and mesophotic reefs in the Mesoamerican Barrier Reef, Caribbean. We show inconsistent responses across families, species and trophic groups between methods across the depth gradient. Fish species and family richness were higher using BRUV at both depth ranges, suggesting that BRUV is more appropriate for recording all components of the fish community. Fish length distributions were not different between methods on shallow reefs, yet BRUV recorded more small fish on mesophotic reefs. However, DOV consistently recorded greater relative fish community biomass of herbivores, suggesting that studies focusing on herbivores should consider using DOV. Our results highlight the importance of considering what component of reef fish community researchers and managers are most interested in surveying when deciding which survey technique to use across natural gradients such as depth. PMID:27959907

Precision surveying system for PEP

International Nuclear Information System (INIS)

Gunn, J.; Lauritzen, T.; Sah, R.; Pellisier, P.F.

1977-01-01

A semi-automatic precision surveying system is being developed for PEP. Reference elevations for vertical alignment will be provided by a liquid level. The short range surveying will be accomplished using a Laser Surveying System featuring automatic data acquisition and analysis

75 FR 57217 - Direct Investment Surveys: BE-11, Annual Survey of U.S. Direct Investment Abroad

Science.gov (United States)

2010-09-20

... both U.S. and international definitions for foreign direct investment and must be represented in the...] RIN 0691-AA74 Direct Investment Surveys: BE-11, Annual Survey of U.S. Direct Investment Abroad AGENCY... the reporting requirements for the BE-11, Annual Survey of U.S. Direct Investment Abroad. The survey...

A Survey on Principal Aspects of Secure Image Transmission

OpenAIRE

Ali Soleymani; Zulkarnain Md Ali; Md Jan Nordin

2012-01-01

This paper is a review on the aspects and approaches of design an image cryptosystem. First a general introduction given for cryptography and images encryption and followed by different techniques in image encryption and related works for each technique surveyed. Finally, general security analysis methods for encrypted images are mentioned.

Designing an Effective Survey

National Research Council Canada - National Science Library

Kasunic, Mark

2005-01-01

... of them. However, to protect the validity of conclusions drawn from a survey, certain procedures must be followed throughout the process of designing, developing, and distributing the survey questionnaire...

77 FR 19032 - Geological Survey

Science.gov (United States)

2012-03-29

... DEPARTMENT OF THE INTERIOR Geological Survey Announcement of National Geospatial Advisory Committee Meeting AGENCY: U.S. Geological Survey, Interior. ACTION: Notice of meeting. SUMMARY: The National.... Geological Survey (703-648-6283, [email protected] ). Registrations are due by April 13, 2012. While the...

A Survey of the Innovation Surveys

NARCIS (Netherlands)

Hong, Shangqin; Oxley, Les; McCann, Philip

Both theoretical and conceptual understanding of innovation has developed significantly since the early 1980s. More noticeable, however, are the major changes that have been experienced in empirically-oriented innovation research as a result of the introduction of firm level innovation surveys.

Patient survey (HCAHPS) - National

Data.gov (United States)

U.S. Department of Health & Human Services — The national average for the HCAHPS survey categories. HCAHPS is a national, standardized survey of hospital patients about their experiences during a recent...

Construction practices: Pulse builder survey results

Energy Technology Data Exchange (ETDEWEB)

Kadulski, R

This paper discusses the results of a nationwide builder survey on common building techniques, such as framing, insulation, airtight construction practices, testing for airtightness, windows, furnaces and water heaters, and ventilation. Results indicate that changes in construction were mainly influenced by the R-2000 program. The spread of R-2000 technology is reflected in the use of higher insulation levels than are called for by codes or than is normal practice, sealing of joints, and attention to air and vapour retarders as well as air tight drywall techniques combined with mechanical ventilation systems.

Application of new technologies in surveying. Einsatz von neuen Technologien im Vermessungswesen

Energy Technology Data Exchange (ETDEWEB)

Sperling, D [Rheinisch-Westfaelisches Elektrizitaetswerk AG, Essen (Germany, F.R.). Hauptverwaltung

1990-07-01

The 'tools' of the surveyor have changed considerably in the last few years. New technologies dominate the work scene, but also require many times higher capital expenditure, associated with increased economic risk. Site definition is undertaken from three fields of engineering surveying: Electronic 3D measuring technique, photogrammetric measuring procedure and surveying by satellite. (orig.).

MMT hypervelocity star survey. III. The complete survey

Energy Technology Data Exchange (ETDEWEB)

Brown, Warren R.; Geller, Margaret J.; Kenyon, Scott J., E-mail: wbrown@cfa.harvard.edu, E-mail: mgeller@cfa.harvard.edu, E-mail: skenyon@cfa.harvard.edu [Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138 (United States)

2014-05-20

We describe our completed spectroscopic survey for unbound hypervelocity stars (HVSs) ejected from the Milky Way. Three new discoveries bring the total number of unbound late B-type stars to 21. We place new constraints on the nature of the stars and on their distances using moderate resolution MMT spectroscopy. Half of the stars are fast rotators; they are certain 2.5-4 M {sub ☉} main sequence stars at 50-120 kpc distances. Correcting for stellar lifetime, our survey implies that unbound 2.5-4 M {sub ☉} stars are ejected from the Milky Way at a rate of 1.5 × 10{sup –6} yr{sup –1}. These unbound HVSs are likely ejected continuously over the past 200 Myr and do not share a common flight time. The anisotropic spatial distribution of HVSs on the sky remains puzzling. Southern hemisphere surveys like SkyMapper will soon allow us to map the all-sky distribution of HVSs. Future proper motion measurements with Hubble Space Telescope and Gaia will provide strong constraints on origin. Existing observations are all consistent with HVS ejections from encounters with the massive black hole in the Galactic center.

MMT hypervelocity star survey. III. The complete survey

International Nuclear Information System (INIS)

Brown, Warren R.; Geller, Margaret J.; Kenyon, Scott J.

2014-01-01

We describe our completed spectroscopic survey for unbound hypervelocity stars (HVSs) ejected from the Milky Way. Three new discoveries bring the total number of unbound late B-type stars to 21. We place new constraints on the nature of the stars and on their distances using moderate resolution MMT spectroscopy. Half of the stars are fast rotators; they are certain 2.5-4 M ☉ main sequence stars at 50-120 kpc distances. Correcting for stellar lifetime, our survey implies that unbound 2.5-4 M ☉ stars are ejected from the Milky Way at a rate of 1.5 × 10 –6 yr –1 . These unbound HVSs are likely ejected continuously over the past 200 Myr and do not share a common flight time. The anisotropic spatial distribution of HVSs on the sky remains puzzling. Southern hemisphere surveys like SkyMapper will soon allow us to map the all-sky distribution of HVSs. Future proper motion measurements with Hubble Space Telescope and Gaia will provide strong constraints on origin. Existing observations are all consistent with HVS ejections from encounters with the massive black hole in the Galactic center.

Mobile-Only Web Survey Respondents

NARCIS (Netherlands)

Lugtig, P.J.|info:eu-repo/dai/nl/304824658; Toepoel, V.|info:eu-repo/dai/nl/304576034; amin, alerk

2016-01-01

Web surveys are no longer completed on just a desktop or laptop computer. Respondents increasingly use mobile devices, such as tablets and smartphones to complete web surveys. In this article, we study how respondents in the American Life Panel complete surveys using varying devices. We show that

77 FR 21086 - Patents External Quality Survey (formerly Customer Panel Quality Survey)

Science.gov (United States)

2012-04-09

... corporations (including those with 500+ employees), small and medium-size businesses, and universities and... DEPARTMENT OF COMMERCE United States Patent and Trademark Office Patents External Quality Survey... their name, address, or Social Security Number. In order to access and complete the online survey...

Worldwide enucleation techniques and materials for treatment of retinoblastoma: an international survey.

Directory of Open Access Journals (Sweden)

Daphne L Mourits

Full Text Available To investigate the current practice of enucleation with or without orbital implant for retinoblastoma in countries across the world.A digital survey identifying operation techniques and material used for orbital implants after enucleation in patients with retinoblastoma.We received a response of 58 surgeons in 32 different countries. A primary artificial implant is routinely inserted by 42 (72.4% surgeons. Ten (17.2% surgeons leave the socket empty, three (5.2% decide per case. Other surgeons insert a dermis fat graft as a standard primary implant (n=1, or fill the socket in a standard secondary procedure (n=2; one uses dermis fat grafts and one artificial implants. The choice for porous implants was more frequent than for non-porous implants: 27 (58.7% and 15 (32.6%, respectively. Both porous and non-porous implant types are used by 4 (8.7% surgeons. Twenty-five surgeons (54.3% insert bare implants, 11 (23.9% use separate wrappings, eight (17.4% use implants with prefab wrapping and two insert implants with and without wrapping depending on type of implant. Attachment of the muscles to the wrapping or implant (at various locations is done by 31 (53.4% surgeons. Eleven (19.0% use a myoconjunctival technique, nine (15.5% suture the muscles to each other and seven (12.1% do not reattach the muscles. Measures to improve volume are implant exchange at an older age (n=4, the use of Restylane SQ (n=1 and osmotic expanders (n=1. Pegging is done by two surgeons.No (worldwide consensus exists about the use of material and techniques for enucleation for the treatment of retinoblastoma. Considerations for the use of different techniques are discussed.

Integrating Geological and Geodetic Surveying Techniques for Landslide Deformation Monitoring: Istanbul Case

Science.gov (United States)

Menteşe, E. Y.; Kilic, O.; BAS, M.; Tarih, A.; Duran, K.; Gumus, S.; Yapar, E. R.; Karasu, M. E.; Mehmetoğlu, H.; Karaman, A.; Edi˙ger, V.; Kosma, R. C.; Ozalaybey, S.; Zor, E.; Arpat, E.; Polat, F.; Dogan, U.; Cakir, Z.; Erkan, B.

2017-12-01

There are several methods that can be utilized for describing the landslide mechanisms. While some of them are commonly used, there are relatively new methods that have been proven to be useful. Obviously, each method has its own limitations and thus integrated use of these methods contributes to obtaining a realistic landslide model. The slopes of Küçükçekmece and Büyükçekmece Lagoons located at the Marmara Sea coast of İstanbul, Turkey, are among most specific examples of complex type landslides. The landslides in the area started developing at low sea level, and appears to ceased or at least slowed down to be at minimum after the sea level rise, as oppose to the still-active landslides that continue to cause damage especially in the valley slopes above the recent sea level between the two lagoons. To clarify the characteristics of these slope movements and classify them in most accurate way, Directorate of Earthquake and Ground Research of Istanbul Metropolitan Municipality launched a project in cooperation with Marmara Research Center of The Scientific and Technological Research Council of Turkey (TÜBİTAK). The project benefits the utility of the techniques of different disciplines such as geology, geophysics, geomorphology, hydrogeology, geotechnics, geodesy, remote sensing and meteorology. Specifically, this study focuses on two main axes of these techniques, namely: geological and geodetic. The reason for selecting these disciplines is because of their efficiency and power to understand the landslide mechanism in the area. Main approaches used in these studies are comprised of geological drills, inclinometer measurements, GPS surveys and SAR (both satellite and ground based) techniques. Integration of the results gathered from these techniques led the project team to comprehend critical aspects of landslide phenomenon in the area and produce precise landslide hazard maps that are basic instruments for a resilient urban development.

MAX and Survey Linkages

Data.gov (United States)

U.S. Department of Health & Human Services — CMS is interested in linking MAX files with survey data, including four surveys conducted by the National Center for Health Statistics (NCHS) - the National Health...

The Extended Northern ROSAT Galaxy Cluster Survey (NORAS II). I. Survey Construction and First Results

International Nuclear Information System (INIS)

Böhringer, Hans; Chon, Gayoung; Trümper, Joachim; Retzlaff, Jörg; Meisenheimer, Klaus; Schartel, Norbert

2017-01-01

As the largest, clearly defined building blocks of our universe, galaxy clusters are interesting astrophysical laboratories and important probes for cosmology. X-ray surveys for galaxy clusters provide one of the best ways to characterize the population of galaxy clusters. We provide a description of the construction of the NORAS II galaxy cluster survey based on X-ray data from the northern part of the ROSAT All-Sky Survey. NORAS II extends the NORAS survey down to a flux limit of 1.8 × 10 −12 erg s −1 cm −2 (0.1–2.4 keV), increasing the sample size by about a factor of two. The NORAS II cluster survey now reaches the same quality and depth as its counterpart, the southern REFLEX II survey, allowing us to combine the two complementary surveys. The paper provides information on the determination of the cluster X-ray parameters, the identification process of the X-ray sources, the statistics of the survey, and the construction of the survey selection function, which we provide in numerical format. Currently NORAS II contains 860 clusters with a median redshift of z  = 0.102. We provide a number of statistical functions, including the log N –log S and the X-ray luminosity function and compare these to the results from the complementary REFLEX II survey. Using the NORAS II sample to constrain the cosmological parameters, σ 8 and Ω m , yields results perfectly consistent with those of REFLEX II. Overall, the results show that the two hemisphere samples, NORAS II and REFLEX II, can be combined without problems into an all-sky sample, just excluding the zone of avoidance.

The Extended Northern ROSAT Galaxy Cluster Survey (NORAS II). I. Survey Construction and First Results

Energy Technology Data Exchange (ETDEWEB)

Böhringer, Hans; Chon, Gayoung; Trümper, Joachim [Max-Planck-Institut für Extraterrestrische Physik, D-85748 Garching (Germany); Retzlaff, Jörg [ESO, D-85748 Garching (Germany); Meisenheimer, Klaus [Max-Planck-Institut für Astronomy, Königstuhl 17, D-69117 Heidelberg (Germany); Schartel, Norbert [ESAC, Camino Bajo del Castillo, Villanueva de la Cañada, E-28692 Madrid (Spain)

2017-05-01

As the largest, clearly defined building blocks of our universe, galaxy clusters are interesting astrophysical laboratories and important probes for cosmology. X-ray surveys for galaxy clusters provide one of the best ways to characterize the population of galaxy clusters. We provide a description of the construction of the NORAS II galaxy cluster survey based on X-ray data from the northern part of the ROSAT All-Sky Survey. NORAS II extends the NORAS survey down to a flux limit of 1.8 × 10{sup −12} erg s{sup −1} cm{sup −2} (0.1–2.4 keV), increasing the sample size by about a factor of two. The NORAS II cluster survey now reaches the same quality and depth as its counterpart, the southern REFLEX II survey, allowing us to combine the two complementary surveys. The paper provides information on the determination of the cluster X-ray parameters, the identification process of the X-ray sources, the statistics of the survey, and the construction of the survey selection function, which we provide in numerical format. Currently NORAS II contains 860 clusters with a median redshift of z  = 0.102. We provide a number of statistical functions, including the log N –log S and the X-ray luminosity function and compare these to the results from the complementary REFLEX II survey. Using the NORAS II sample to constrain the cosmological parameters, σ {sub 8} and Ω{sub m}, yields results perfectly consistent with those of REFLEX II. Overall, the results show that the two hemisphere samples, NORAS II and REFLEX II, can be combined without problems into an all-sky sample, just excluding the zone of avoidance.

Search Techniques for the Web of Things: A Taxonomy and Survey

Directory of Open Access Journals (Sweden)

Yuchao Zhou

2016-04-01

Full Text Available The Web of Things aims to make physical world objects and their data accessible through standard Web technologies to enable intelligent applications and sophisticated data analytics. Due to the amount and heterogeneity of the data, it is challenging to perform data analysis directly; especially when the data is captured from a large number of distributed sources. However, the size and scope of the data can be reduced and narrowed down with search techniques, so that only the most relevant and useful data items are selected according to the application requirements. Search is fundamental to the Web of Things while challenging by nature in this context, e.g., mobility of the objects, opportunistic presence and sensing, continuous data streams with changing spatial and temporal properties, efficient indexing for historical and real time data. The research community has developed numerous techniques and methods to tackle these problems as reported by a large body of literature in the last few years. A comprehensive investigation of the current and past studies is necessary to gain a clear view of the research landscape and to identify promising future directions. This survey reviews the state-of-the-art search methods for the Web of Things, which are classified according to three different viewpoints: basic principles, data/knowledge representation, and contents being searched. Experiences and lessons learned from the existing work and some EU research projects related to Web of Things are discussed, and an outlook to the future research is presented.

76 FR 58420 - Direct Investment Surveys: BE-12, Benchmark Survey of Foreign Direct Investment in the United States

Science.gov (United States)

2011-09-21

...] RIN 0691-AA80 Direct Investment Surveys: BE-12, Benchmark Survey of Foreign Direct Investment in the... of Foreign Direct Investment in the United States. Benchmark surveys are conducted every five years; the prior survey covered 2007. The benchmark survey covers the universe of foreign direct investment...

EPRINT ARCHIVE USER SURVEY

CERN Multimedia

2001-01-01

University of Southampton invites the CERN community to participate in a survey Professor Stevan Harnad is conducting on current users and non-users of Eprint Archives. http://www.eprints.org/survey/ The findings will be used to suggest potential enhancements of the services as well as to get a deeper understanding of the very rapid developments in the on-line dissemination and use of scientific and scholarly research. (The survey is anonymous. Revealing your identity is optional and it will be kept confidential.)

SURVEY, Lowndes County, MS

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, REFUGIO COUNTY, TEXAS

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, FAIRFIELD COUNTY, CT

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, POTTAWATTAMIE COUNTY, IA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

Survey, OCONEE COUNTY, SC

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, DOUGLAS COUNTY, MN

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, MISSOULA COUNTY, MT

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, LAKE COUNTY, MT

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, BUFFALO COUNTY, NE

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, BARNSTABLE COUNTY, MA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, NATCHITOCHES PARISH, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, CASCADE COUNTY, MT

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

Large Pelagics Intercept Survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Large Pelagics Intercept Survey (LPIS) is a dockside survey of private and charterboat captains who have just completed fishing trips directed at large pelagic...

SURVEY, HOLMES COUNTY, MS

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, KENAI PENINSULSA, AK

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, OSCEOLA COUNTY, FLORIDA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, BROADWATER COUNTY, MT

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, MONO COUNTY, CALIFORNIA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

Survey and Restoration

Science.gov (United States)

Mileto, C.; Vegas, F.

2017-05-01

In addition to the technological evolution over the last two centuries, survey has experienced two main conceptual leaps: the introduction of photography as a tool for an indiscriminate register for reality, and the shift from autographic to allographic survey, phenomena which can generate a distancing effect within the restoration process. Besides, this text presents the relationship between survey in its numerous forms and technologies (manual and semi-manual to more complex ones like scanner-laser) and the restoration of the building, either for establishing a diagnosis, operating or valorizating, illustrating it with examples developed by the authors, as well as the criteria to be applied when documenting a building to be restored, irrespective of the means and technology available in each case.

SURVEY AND RESTORATION

Directory of Open Access Journals (Sweden)

C. Mileto

2017-05-01

Full Text Available In addition to the technological evolution over the last two centuries, survey has experienced two main conceptual leaps: the introduction of photography as a tool for an indiscriminate register for reality, and the shift from autographic to allographic survey, phenomena which can generate a distancing effect within the restoration process. Besides, this text presents the relationship between survey in its numerous forms and technologies (manual and semi-manual to more complex ones like scanner-laser and the restoration of the building, either for establishing a diagnosis, operating or valorizating, illustrating it with examples developed by the authors, as well as the criteria to be applied when documenting a building to be restored, irrespective of the means and technology available in each case.

Primordial non-Gaussianity from LAMOST surveys

International Nuclear Information System (INIS)

Gong Yan; Wang Xin; Chen Xuelei; Zheng Zheng

2010-01-01

The primordial non-Gaussianity (PNG) in the matter density perturbation is a very powerful probe of the physics of the very early Universe. The local PNG can induce a distinct scale-dependent bias on the large scale structure distribution of galaxies and quasars, which could be used for constraining it. We study the detection limits of PNG from the surveys of the LAMOST telescope. The cases of the main galaxy survey, the luminous red galaxy (LRG) survey, and the quasar survey of different magnitude limits are considered. We find that the Main1 sample (i.e. the main galaxy survey which is one magnitude deeper than the SDSS main galaxy survey, or r NL are |f NL | NL | NL | is between 50 and 103, depending on the magnitude limit of the survey. With Planck-like priors on cosmological parameters, the quasar survey with g NL | < 43 (2σ). We also discuss the possibility of further tightening the constraint by using the relative bias method proposed by Seljak.

A survey of numerical cubature over triangles

Energy Technology Data Exchange (ETDEWEB)

Lyness, J.N.; Cools, R.

1993-12-31

This survey collects together theoretical results in the area of numerical cubature over triangles and is a vehicle for a current bibliography. We treat first the theory relating to regular integrands and then the corresponding theory for singular integrands with emphasis on the ``full comer singularity.`` Within these two sections we treat successively approaches based on transforming the triangle into a square, formulas based on polynomial moment fitting, and extrapolation techniques. Within each category we quote key theoretical results without proof, and relate other results and references to these. Nearly all the references we have found may be readily placed in one of these categories. This survey is theoretical in character and does not include recent work in adaptive and automatic integration.

Precision in systematic trawl surveys as assessed from replicate ...

African Journals Online (AJOL)

Local variability was analysed as random noise, modelled and later reapplied ... The main statistical techniques applied were less susceptible to outlier catches ... be used to estimate the vessel factor when intercalibrating trawl survey vessels.

(Re)surveying Mediterranean rural landscapes : GIS and legacy survey data.

OpenAIRE

Witcher, R. E.

2008-01-01

Legacy data have always been important for Mediterranean archaeologists. Over the past decade, one specific category of legacy data, that deriving from regional survey, has become particularly important. Not only has the scale of research questions become larger (requiring greater reliance on others' data), but the surface archaeological record is deteriorating (diminishing the ability to recover good data). The legacy data from many individual surveys have now been subject to digitisation an...

Performance Analysis of Low-Cost Single-Frequency GPS Receivers in Hydrographic Surveying

Science.gov (United States)

Elsobeiey, M.

2017-10-01

The International Hydrographic Organization (IHO) has issued standards that provide the minimum requirements for different types of hydrographic surveys execution to collect data to be used to compile navigational charts. Such standards are usually updated from time to time to reflect new survey techniques and practices and must be achieved to assure both surface navigation safety and marine environment protection. Hydrographic surveys can be classified to four orders namely, special order, order 1a, order 1b, and order 2. The order of hydrographic surveys to use should be determined in accordance with the importance to the safety of navigation in the surveyed area. Typically, geodetic-grade dual-frequency GPS receivers are utilized for position determination during data collection in hydrographic surveys. However, with the evolution of high-sensitivity low-cost single-frequency receivers, it is very important to evaluate the performance of such receivers. This paper investigates the performance of low-cost single-frequency GPS receivers in hydrographic surveying applications. The main objective is to examine whether low-cost single-frequency receivers fulfil the IHO standards for hydrographic surveys. It is shown that the low-cost single-frequency receivers meet the IHO horizontal accuracy for all hydrographic surveys orders at any depth. However, the single-frequency receivers meet only order 2 requirements for vertical accuracy at depth more than or equal 100 m.

Iowa Intensive Archaeological Survey

Data.gov (United States)

Iowa State University GIS Support and Research Facility — This shape file contains intensive level archaeological survey areas for the state of Iowa. All intensive Phase I surveys that are submitted to the State Historic...

78 FR 41031 - Proposed Information Collection; Comment Request; Direct Investment Surveys: BE-11, Annual Survey...

Science.gov (United States)

2013-07-09

... owning foreign business enterprises in the 2009 benchmark survey of U.S. direct investment abroad, along... Request; Direct Investment Surveys: BE-11, Annual Survey of U.S. Direct Investment Abroad AGENCY: Bureau... to Sarahelen Thompson, Acting Chief, Direct Investment Division (BE-50), Bureau of Economic Analysis...

The VANDELS ESO spectroscopic survey

Science.gov (United States)

McLure, R. J.; Pentericci, L.; Cimatti, A.; Dunlop, J. S.; Elbaz, D.; Fontana, A.; Nandra, K.; Amorin, R.; Bolzonella, M.; Bongiorno, A.; Carnall, A. C.; Castellano, M.; Cirasuolo, M.; Cucciati, O.; Cullen, F.; De Barros, S.; Finkelstein, S. L.; Fontanot, F.; Franzetti, P.; Fumana, M.; Gargiulo, A.; Garilli, B.; Guaita, L.; Hartley, W. G.; Iovino, A.; Jarvis, M. J.; Juneau, S.; Karman, W.; Maccagni, D.; Marchi, F.; Mármol-Queraltó, E.; Pompei, E.; Pozzetti, L.; Scodeggio, M.; Sommariva, V.; Talia, M.; Almaini, O.; Balestra, I.; Bardelli, S.; Bell, E. F.; Bourne, N.; Bowler, R. A. A.; Brusa, M.; Buitrago, F.; Caputi, K. I.; Cassata, P.; Charlot, S.; Citro, A.; Cresci, G.; Cristiani, S.; Curtis-Lake, E.; Dickinson, M.; Fazio, G. G.; Ferguson, H. C.; Fiore, F.; Franco, M.; Fynbo, J. P. U.; Galametz, A.; Georgakakis, A.; Giavalisco, M.; Grazian, A.; Hathi, N. P.; Jung, I.; Kim, S.; Koekemoer, A. M.; Khusanova, Y.; Le Fèvre, O.; Lotz, J. M.; Mannucci, F.; Maltby, D. T.; Matsuoka, K.; McLeod, D. J.; Mendez-Hernandez, H.; Mendez-Abreu, J.; Mignoli, M.; Moresco, M.; Mortlock, A.; Nonino, M.; Pannella, M.; Papovich, C.; Popesso, P.; Rosario, D. P.; Salvato, M.; Santini, P.; Schaerer, D.; Schreiber, C.; Stark, D. P.; Tasca, L. A. M.; Thomas, R.; Treu, T.; Vanzella, E.; Wild, V.; Williams, C. C.; Zamorani, G.; Zucca, E.

2018-05-01

VANDELS is a uniquely-deep spectroscopic survey of high-redshift galaxies with the VIMOS spectrograph on ESO's Very Large Telescope (VLT). The survey has obtained ultra-deep optical (0.48 studies. Using integration times calculated to produce an approximately constant signal-to-noise ratio (20 motivation, survey design and target selection.

Environmental Survey Report for ORNL: Small Mammal Abundance and Distribution Survey Oak Ridge National Environmental Research Park 2009 - 2010

Energy Technology Data Exchange (ETDEWEB)

Giffen, Neil R [ORNL; Reasor, R. Scott [Oak Ridge Institute for Science and Education (ORISE); Campbell, Claire L. [Oak Ridge Institute for Science and Education (ORISE)

2009-12-01

This report summarizes a 1-year small mammal biodiversity survey conducted on the Oak Ridge National Environmental Research Park (OR Research Park). The task was implemented through the Oak Ridge National Laboratory (ORNL) Natural Resources Management Program and included researchers from the ORNL Environmental Sciences Division, interns in the Oak Ridge Institute for Science and Education Higher Education Research Experiences Program, and ORNL Environmental Protection Services staff. Eight sites were surveyed reservation wide. The survey was conducted in an effort to determine species abundance and diversity of small mammal populations throughout the reservation and to continue the historical inventory of small mammal presence for biodiversity records. This data collection effort was in support of the approved Wildlife Management Plan for the Oak Ridge Reservation, a major goal of which is to maintain and enhance wildlife biodiversity on the Reservation. Three of the sites (Poplar Creek, McNew Hollow, and Deer Check Station Field) were previously surveyed during a major natural resources inventory conducted in 1996. Five new sites were included in this study: Bearden Creek, Rainy Knob (Natural Area 21), Gum Hollow, White Oak Creek and Melton Branch. The 2009-2010 small mammal surveys were conducted from June 2009 to July 2010 on the Oak Ridge National Environmental Research Park (OR Research Park). The survey had two main goals: (1) to determine species abundance and diversity and (2) to update historical records on the OR Research Park. The park is located on the Department of Energy-owned Oak Ridge Reservation, which encompasses 13,580 ha. The primary focus of the study was riparian zones. In addition to small mammal sampling, vegetation and coarse woody debris samples were taken at certain sites to determine any correlations between habitat and species presence. During the survey all specimens were captured and released using live trapping techniques including

SURVEY, Northumberland County, VA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — The field survey data for this coastal study includes a field report that exhibits photos and transect information collected in the field survey phase of the study....

A Meta-Analysis of Experiments on the Effectiveness of Incentives in Organizational Surveys

NARCIS (Netherlands)

Torres van Grinsven, Vanessa; Hox, Joop

2014-01-01

The use of monetary and non-monetary incentives for increasing response is considered a proven and widely used method in surveys of individuals or households. This applies not only to mail, but also to face-to-face and telephone surveys. Experimental research shows that the technique is also

78 FR 4983 - Proposed Information Collection; Women Veterans Healthcare Barriers Survey Activity: Comment Request

Science.gov (United States)

2013-01-23

... Veterans Healthcare Barriers Survey Activity: Comment Request AGENCY: Veterans Health Administration... Healthcare Barriers Survey'' in any correspondence. During the comment period, comments may be viewed online... of automated collection techniques or the use of other forms of information technology. Title: Women...

Low-dose biplanar skeletal survey versus digital skeletal survey in multiple myeloma

International Nuclear Information System (INIS)

Boutry, Nathalie; Dutouquet, Bastien; Cotten, Anne; Leleu, Xavier; Vieillard, Marie-Helene; Duhamel, Alain

2013-01-01

To evaluate the low-dose biplanar (LDB) skeletal survey (SS) for the assessment of focal bone involvement in patients with multiple myeloma (MM) as compared with digital SS and to compare the two techniques in terms of image quality, patient comfort and radiation exposure. Fifty-six consecutive patients with newly diagnosed or first relapsed MM underwent LDB and digital SS on the same day. These were assessed by two radiologists for the detection of focal bone lesions. In the case of discordance, whole-body MR imaging was performed. Image quality, patient comfort and radiation dose were also assessed. Fifty-six patients (M:30, F:26, mean age, 62 years) with newly diagnosed (n = 21) or first relapse MM (n = 35) were enrolled. A total of 473 bone lesions in 46 patients (82 %) were detected. Out of that total, digital SS detected significantly more lesions than LDB SS (451 [95.35 %] versus 467 [98.73 %]), especially in osteopenic and obese patients. Overall patient satisfaction was greater with LDB SS (48.6 %) compared with digital SS (2.7 %). The radiation dose was significantly reduced (by a factor of 7.8) with the LDB X-ray device. Low-dose biplanar skeletal surveys cannot replace digital SS in all patients suffering from multiple myeloma. (orig.)

Low-dose biplanar skeletal survey versus digital skeletal survey in multiple myeloma

Energy Technology Data Exchange (ETDEWEB)

Boutry, Nathalie [University Hospital of Jeanne de Flandre and University of Lille 2, Departments of Pediatric and Musculoskeletal Imaging, Lille (France); University Hospital of Jeanne de Flandre and University of Lille 2, Department of Pediatric Imaging, Lille (France); Hopital Jeanne de Flandre, Service de Radiopediatrie, Lille (France); Dutouquet, Bastien; Cotten, Anne [University Hospital of Roger Salengro and University of Lille 2, Department of Musculoskeletal Imaging, Lille (France); Leleu, Xavier [University Hospital of Claude Huriez and University of Lille 2, Clinical Hematology Department, Lille (France); Vieillard, Marie-Helene [University Hospital of Roger Salengro and University of Lille 2, Rheumatology Department, Lille (France); Duhamel, Alain [University of Lille 2, Department of Medical Statistics, Lille (France)

2013-08-15

To evaluate the low-dose biplanar (LDB) skeletal survey (SS) for the assessment of focal bone involvement in patients with multiple myeloma (MM) as compared with digital SS and to compare the two techniques in terms of image quality, patient comfort and radiation exposure. Fifty-six consecutive patients with newly diagnosed or first relapsed MM underwent LDB and digital SS on the same day. These were assessed by two radiologists for the detection of focal bone lesions. In the case of discordance, whole-body MR imaging was performed. Image quality, patient comfort and radiation dose were also assessed. Fifty-six patients (M:30, F:26, mean age, 62 years) with newly diagnosed (n = 21) or first relapse MM (n = 35) were enrolled. A total of 473 bone lesions in 46 patients (82 %) were detected. Out of that total, digital SS detected significantly more lesions than LDB SS (451 [95.35 %] versus 467 [98.73 %]), especially in osteopenic and obese patients. Overall patient satisfaction was greater with LDB SS (48.6 %) compared with digital SS (2.7 %). The radiation dose was significantly reduced (by a factor of 7.8) with the LDB X-ray device. Low-dose biplanar skeletal surveys cannot replace digital SS in all patients suffering from multiple myeloma. (orig.)

Motivation in Business Survey Response Behavior : Influencing motivation to improve survey outcome

NARCIS (Netherlands)

Torres van Grinsven, V.|info:eu-repo/dai/nl/355608510

2015-01-01

In this dissertation we show theoretical and empirical insights into the concept of motivation in the context of the business and organizational survey task. The research has led to a number of recommendations on how to improve organizational survey and communication design to enhance motivation and

The Data Release of the Sloan Digital Sky Survey-II Supernova Survey

DEFF Research Database (Denmark)

Sako, Masao; Bassett, Bruce; C. Becker, Andrew

2014-01-01

This paper describes the data release of the Sloan Digital Sky Survey-II (SDSS-II) Supernova Survey conducted between 2005 and 2007. Light curves, spectra, classifications, and ancillary data are presented for 10,258 variable and transient sources discovered through repeat ugriz imaging of SDSS S...

Wide Field Radio Transient Surveys

Science.gov (United States)

Bower, Geoffrey

2011-04-01

The time domain of the radio wavelength sky has been only sparsely explored. Nevertheless, serendipitous discovery and results from limited surveys indicate that there is much to be found on timescales from nanoseconds to years and at wavelengths from meters to millimeters. These observations have revealed unexpected phenomena such as rotating radio transients and coherent pulses from brown dwarfs. Additionally, archival studies have revealed an unknown class of radio transients without radio, optical, or high-energy hosts. The new generation of centimeter-wave radio telescopes such as the Allen Telescope Array (ATA) will exploit wide fields of view and flexible digital signal processing to systematically explore radio transient parameter space, as well as lay the scientific and technical foundation for the Square Kilometer Array. Known unknowns that will be the target of future transient surveys include orphan gamma-ray burst afterglows, radio supernovae, tidally-disrupted stars, flare stars, and magnetars. While probing the variable sky, these surveys will also provide unprecedented information on the static radio sky. I will present results from three large ATA surveys (the Fly's Eye survey, the ATA Twenty CM Survey (ATATS), and the Pi GHz Survey (PiGSS)) and several small ATA transient searches. Finally, I will discuss the landscape and opportunities for future instruments at centimeter wavelengths.

76 FR 17819 - Proposed Information Collection; Comment Request; Direct Investment Surveys: BE-15, Annual Survey...

Science.gov (United States)

2011-03-31

... Request; Direct Investment Surveys: BE-15, Annual Survey of Foreign Direct Investment in the United States... INFORMATION: I. Abstract The Annual Survey of Foreign Direct Investment in the United States (Form BE-15... data are needed to provide reliable, useful, and timely measures of foreign direct investment in the...

A Comparison of Web-Based and Paper-Based Survey Methods: Testing Assumptions of Survey Mode and Response Cost

Science.gov (United States)

Greenlaw, Corey; Brown-Welty, Sharon

2009-01-01

Web-based surveys have become more prevalent in areas such as evaluation, research, and marketing research to name a few. The proliferation of these online surveys raises the question, how do response rates compare with traditional surveys and at what cost? This research explored response rates and costs for Web-based surveys, paper surveys, and…

Survey on visualization and analysis techniques based on diffusion MRI for in-vivo anisotropic diffusion structures

International Nuclear Information System (INIS)

Masutani, Yoshitaka; Sato, Tetsuo; Urayama, Shin-ichi; Bihan, D.L.

2008-01-01

In association with development of diffusion MR imaging technologies for anisotropic diffusion measurement in living body, related research is explosively increasing including research fields of applied mathematics and visualization in addition to MR imaging, biomedical image technology, and medical science. One of the reasons is that the diffusion MRI data set is a set of high dimensional image information beyond conventional scalar or vector images, and is attractive for the researchers in the related fields. This survey paper is mainly aimed at introducing state-of-the-art of post processing techniques reported in the literature for diffusion MRI data, such as analysis and visualization. (author)

A technique for reducing diverse habits survey data and its application to seafood consumption near Winfrith

International Nuclear Information System (INIS)

Smith, B.D.; Hunt, G.J.

1989-01-01

Habits surveys provide basic information to enable doses to appropriate critical groups of members of the public to be assessed. In some cases, the relevant habits of those to be included in the critical group can be quite diverse, and a simplifying method may be needed. A technique for this is described, and exemplified in relation to liquid radioactive waste discharges from AEE Winfrith, an area where the range of seafoods and radionuclide concentrations in them result in a wide variation of doses. Weighted mean consumption rates are derived for the critical group, and an example of their application in setting a revised liquid discharge authorisation is given. (author)

75 FR 53611 - Direct Investment Surveys: BE-577, Quarterly Survey of U.S. Direct Investment Abroad-Direct...

Science.gov (United States)

2010-09-01

...] RIN 0691-AA75 Direct Investment Surveys: BE-577, Quarterly Survey of U.S. Direct Investment Abroad--Direct Transactions of U.S. Reporter With Foreign Affiliate AGENCY: Bureau of Economic Analysis, Commerce...-577 quarterly survey of U.S. direct investment abroad. The survey is conducted quarterly and obtains...

A Survey of Phase Change Memory Systems

Institute of Scientific and Technical Information of China (English)

夏飞; 蒋德钧; 熊劲; 孙凝晖

2015-01-01

As the scaling of applications increases, the demand of main memory capacity increases in order to serve large working set. It is difficult for DRAM (dynamic random access memory) based memory system to satisfy the memory capacity requirement due to its limited scalability and high energy consumption. Compared to DRAM, PCM (phase change memory) has better scalability, lower energy leakage, and non-volatility. PCM memory systems have become a hot topic of academic and industrial research. However, PCM technology has the following three drawbacks: long write latency, limited write endurance, and high write energy, which raises challenges to its adoption in practice. This paper surveys architectural research work to optimize PCM memory systems. First, this paper introduces the background of PCM. Then, it surveys research efforts on PCM memory systems in performance optimization, lifetime improving, and energy saving in detail, respectively. This paper also compares and summarizes these techniques from multiple dimensions. Finally, it concludes these optimization techniques and discusses possible research directions of PCM memory systems in future.

NGS Survey Control Map

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The NGS Survey Control Map provides a map of the US which allows you to find and display geodetic survey control points stored in the database of the National...

The Value Of Enhanced Neo Surveys

Science.gov (United States)

Harris, Alan W.

2012-10-01

NEO surveys have now achieved, more or less, the “Spaceguard Goal” of cataloging 90% of NEAs larger than 1 km in diameter, and thereby have reduced the short-term hazard from cosmic impacts by about an order of magnitude, from an actuarial estimate of 1,000 deaths per year (actually about a billion every million years, with very little in between), to about 100 deaths per year, with a shift toward smaller but more frequent events accounting for the remaining risk. It is fair to ask, then, what is the value of a next-generation accelerated survey to “retire” much of the remaining risk. The curve of completion of survey versus size of NEA is remarkably similar for any survey, ground or space based, visible light or thermal IR, so it is possible to integrate risk over all sizes, with a time variable curve of completion to evaluate the actuarial value of speeding up survey completion. I will present my latest estimate of NEA population and completion of surveys. From those I will estimate the “value” of accelerated surveys such as Pan-STARRS, LSST, or space-based surveys, versus continuing with current surveys. My tentative conclusion is that we may have already reached the point in terms of cost-benefit where accelerated surveys are not cost-effective in terms of reducing impact risk. If not yet, we soon will. On the other hand, the surveys, which find and catalog main-belt and other classes of small bodies as well as NEOs, have provided a gold mine of good science. The scientific value of continued or accelerated surveys needs to be emphasized as the impact risk is increasingly “retired.”

Improving the design of amphibian surveys using soil data: A case study in two wilderness areas

Science.gov (United States)

Bowen, K.D.; Beever, E.A.; Gafvert, U.B.

2009-01-01

Amphibian populations are known, or thought to be, declining worldwide. Although protected natural areas may act as reservoirs of biological integrity and serve as benchmarks for comparison with unprotected areas, they are not immune from population declines and extinctions and should be monitored. Unfortunately, identifying survey sites and performing long-term fieldwork within such (often remote) areas involves a special set of problems. We used the USDA Natural Resource Conservation Service Soil Survey Geographic (SSURGO) Database to identify, a priori, potential habitat for aquatic-breeding amphibians on North and South Manitou Islands, Sleeping Bear Dunes National Lakeshore, Michigan, and compared the results to those obtained using National Wetland Inventory (NWI) data. The SSURGO approach identified more target sites for surveys than the NWI approach, and it identified more small and ephemeral wetlands. Field surveys used a combination of daytime call surveys, night-time call surveys, and perimeter surveys. We found that sites that would not have been identified with NWI data often contained amphibians and, in one case, contained wetland-breeding species that would not have been found using NWI data. Our technique allows for easy a priori identification of numerous survey sites that might not be identified using other sources of spatial information. We recognize, however, that the most effective site identification and survey techniques will likely use a combination of methods in addition to those described here.

Exploiting stock data: a survey of state of the art computational techniques aimed at producing beliefs regarding investment portfolios

Directory of Open Access Journals (Sweden)

Mario Linares Vásquez

2008-01-01

Full Text Available Selecting an investment portfolio has inspired several models aimed at optimising the set of securities which an in-vesttor may select according to a number of specific decision criteria such as risk, expected return and planning hori-zon. The classical approach has been developed for supporting the two stages of portfolio selection and is supported by disciplines such as econometrics, technical analysis and corporative finance. However, with the emerging field of computational finance, new and interesting techniques have arisen in line with the need for the automatic processing of vast volumes of information. This paper surveys such new techniques which belong to the body of knowledge con-cerning computing and systems engineering, focusing on techniques particularly aimed at producing beliefs regar-ding investment portfolios.

Survey of NDT techniques, services, qualifications and certification of NDT personnel-preliminary results

International Nuclear Information System (INIS)

Aleta, C.R.; Kinilitan, V.E.; Lailo, R.M.

1987-01-01

This paper presented the results of a survey conducted to determine the profile of the NDT industry including its problems. A questionnaire designed in three parts 1) present practices on qualification and certification, 2) NDT equipment and 3) services and problems in NDT. Of the 36 firms contacted only 20 responded. Results indicated the following: a) most firms are engaged in four (4) main techniques, RT, UT, MT and PT. Only 2 indicated capability of ET. b) level III personnel are relatively few in number, c) most firms allow the ASNT recommendation as a basis for their qualifications and certification and are in favor of standardization of the qualification and certification process and supportive of a national center for training of NDT personnel and d) most firms perceived the lack of adequate repair/maintenance skills/facilities, followed by high cost of equipment and the lack of national standard for qualification and certification. (ELC)

Instrument and Survey Analysis Technical Report: Program Implementation Survey. Technical Report #1112

Science.gov (United States)

Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical document provides guidance to educators on the creation and interpretation of survey instruments, particularly as they relate to an analysis of program implementation. Illustrative examples are drawn from a survey of educators related to the use of the easyCBM learning system. This document includes specific sections on…

Ninth Triennial Toxicology Salary Survey.

Science.gov (United States)

Gad, Shayne Cox; Sullivan, Dexter Wayne

2016-01-01

This survey serves as the ninth in a series of toxicology salary surveys conducted at 3-year intervals and beginning in 1988. An electronic survey instrument was distributed to 5919 individuals including members of the Society of Toxicology, American College of Toxicology, and 23 additional professional organizations. Question items inquired about gender, age, degree, years of experience, certifications held, areas of specialization, society membership, employment and income. Overall, 1293 responses were received (response rate 21.8%). The results of the 2014 survey provide insight into the job market and career path for current and future toxicologists. © The Author(s) 2016.

Storytelling and Visualization: An Extended Survey

OpenAIRE

Chao Tong; Richard Roberts; Rita Borgo; Sean Walton; Robert S. Laramee; Kodzo Wegba; Aidong Lu; Yun Wang; Huamin Qu; Qiong Luo; Xiaojuan Ma

2018-01-01

Throughout history, storytelling has been an effective way of conveying information and knowledge. In the field of visualization, storytelling is rapidly gaining momentum and evolving cutting-edge techniques that enhance understanding. Many communities have commented on the importance of storytelling in data visualization. Storytellers tend to be integrating complex visualizations into their narratives in growing numbers. In this paper, we present a survey of storytelling literature in visual...

Mining survey data for SWOT analysis

OpenAIRE

Phadermrod, Boonyarat

2016-01-01

Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis is one of the most important tools for strategic planning. The traditional method of conducting SWOT analysis does not prioritize and is likely to hold subjective views that may result in an improper strategic action. Accordingly, this research exploits Importance-Performance Analysis (IPA), a technique for measuring customers’ satisfaction based on survey data, to systematically generate prioritized SWOT factors based on custom...

Galaxy redshift surveys with sparse sampling

International Nuclear Information System (INIS)

Chiang, Chi-Ting; Wullstein, Philipp; Komatsu, Eiichiro; Jee, Inh; Jeong, Donghui; Blanc, Guillermo A.; Ciardullo, Robin; Gronwall, Caryl; Hagen, Alex; Schneider, Donald P.; Drory, Niv; Fabricius, Maximilian; Landriau, Martin; Finkelstein, Steven; Jogee, Shardha; Cooper, Erin Mentuch; Tuttle, Sarah; Gebhardt, Karl; Hill, Gary J.

2013-01-01

Survey observations of the three-dimensional locations of galaxies are a powerful approach to measure the distribution of matter in the universe, which can be used to learn about the nature of dark energy, physics of inflation, neutrino masses, etc. A competitive survey, however, requires a large volume (e.g., V survey ∼ 10Gpc 3 ) to be covered, and thus tends to be expensive. A ''sparse sampling'' method offers a more affordable solution to this problem: within a survey footprint covering a given survey volume, V survey , we observe only a fraction of the volume. The distribution of observed regions should be chosen such that their separation is smaller than the length scale corresponding to the wavenumber of interest. Then one can recover the power spectrum of galaxies with precision expected for a survey covering a volume of V survey (rather than the volume of the sum of observed regions) with the number density of galaxies given by the total number of observed galaxies divided by V survey (rather than the number density of galaxies within an observed region). We find that regularly-spaced sampling yields an unbiased power spectrum with no window function effect, and deviations from regularly-spaced sampling, which are unavoidable in realistic surveys, introduce calculable window function effects and increase the uncertainties of the recovered power spectrum. On the other hand, we show that the two-point correlation function (pair counting) is not affected by sparse sampling. While we discuss the sparse sampling method within the context of the forthcoming Hobby-Eberly Telescope Dark Energy Experiment, the method is general and can be applied to other galaxy surveys

PTAC driving safety survey results

Energy Technology Data Exchange (ETDEWEB)

Lloyd, E. [Petroleum Technology Alliance Canada, Calgary, AB (Canada)

2005-07-01

The results of a survey conducted by the Petroleum Technology Alliance Canada were presented. The survey identified ways in which companies in the oil and gas industry can reduce the potential for vehicle incidents, as well as improve fleet management techniques. Respondents provided a list of over 60 relevant technologies with high potential for application. Top driving safety challenges included adverse weather and road conditions, as well as driver attitude and awareness. Driver speed and fatigue were also seen as significant challenges, as well as encounters with wildlife and road conditions. Poor site conditions were also identified as a challenge, along with poor hazard recognition training, and lack of experience. A total of 157 representatives responded, whose fleets collectively drive approximately 136,500,000 km per year. The fleets totalled 15,800 vehicles. Respondents' affiliations with the oil and gas industry were included, as well as ownership classifications and company fleet sizes. Total annual fleet kilometers were presented, as well as the number of incidents per company per year, along with the number of respondents' animal strikes per year. tabs, figs.

Pilot study for natural radiation survey

International Nuclear Information System (INIS)

Brown, L.; Driscoll, C.M.H.; Green, B.M.R.; Miles, J.C.H.

1983-01-01

NRPB's national survey of natural radiation exposure in homes commenced in 1982 and will run until 1984. A pilot survey was undertaken in over 100 homes for one year, using passive thermoluminescent dosemeters to measure external radiation from terrestrial and cosmic sources and passive radon dosemeters to measure the radon-222 gas concentration. A preliminary analysis of the results obtained from the pilot survey is given. The main value of the pilot survey was in providing experience and various administrative and scientific procedures have been simplified or automated for the national survey. (U.K.)

Nurse Practitioners' Use of Communication Techniques: Results of a Maryland Oral Health Literacy Survey.

Science.gov (United States)

Koo, Laura W; Horowitz, Alice M; Radice, Sarah D; Wang, Min Q; Kleinman, Dushanka V

2016-01-01

We examined nurse practitioners' use and opinions of recommended communication techniques for the promotion of oral health as part of a Maryland state-wide oral health literacy assessment. Use of recommended health-literate and patient-centered communication techniques have demonstrated improved health outcomes. A 27-item self-report survey, containing 17 communication technique items, across 5 domains, was mailed to 1,410 licensed nurse practitioners (NPs) in Maryland in 2010. Use of communication techniques and opinions about their effectiveness were analyzed using descriptive statistics. General linear models explored provider and practice characteristics to predict differences in the total number and the mean number of communication techniques routinely used in a week. More than 80% of NPs (N = 194) routinely used 3 of the 7 basic communication techniques: simple language, limiting teaching to 2-3 concepts, and speaking slowly. More than 75% of respondents believed that 6 of the 7 basic communication techniques are effective. Sociodemographic provider characteristics and practice characteristics were not significant predictors of the mean number or the total number of communication techniques routinely used by NPs in a week. Potential predictors for using more of the 7 basic communication techniques, demonstrating significance in one general linear model each, were: assessing the office for user-friendliness and ever taking a communication course in addition to nursing school. NPs in Maryland self-reported routinely using some recommended health-literate communication techniques, with belief in their effectiveness. Our findings suggest that NPs who had assessed the office for patient-friendliness or who had taken a communication course beyond their initial education may be predictors for using more of the 7 basic communication techniques. These self-reported findings should be validated with observational studies. Graduate and continuing education for NPs

Critical review of directional neutron survey meters

International Nuclear Information System (INIS)

Balmer, Matthew J.I.; Gamage, Kelum A.A.; Taylor, Graeme C.

2014-01-01

Having been overlooked for many years, research is now starting to take into account the directional distribution of the neutron work place field. The impact of not taking this into account has led to overly conservative estimates of dose in neutron workplace fields. This paper provides a critical review of this existing research into directional survey meters which could improve these estimates of dose. Instruments which could be adapted for use as directional neutron survey meters are also considered within this review. Using Monte-Carlo techniques, two of the most promising existing designs are evaluated; a boron-doped liquid scintillator and a multi-detector directional spectrometer. As an outcome of these simulations, possible adaptations to these instruments are suggested with a view to improving the portability of the instrument. -- Highlights: • We critically review the existing literature into directional survey meters. • Instruments which could be adapted for this purpose are also reviewed. • Investigate the potential of much lighter portable real-time instrument. • Improvements to existing instruments are suggested to improve their design. • Boron-Doped liquid scintillator design is the most promising, but needs further work

Benign disease in radiation therapy: a survey in Belgium

International Nuclear Information System (INIS)

Beauduin, M.; Deneufbourg, J.M.; Deneve, W.; Hermans, J.; Hoornaert, M.T.; Scalliet, P.; Spaas, P.; Vanderick, J.; Dijcke, V.; Van Houtte, P.; Vynckier, S.; Weltens, C.

2001-01-01

In 1996 and 2000, a survey of radiation practice in Belgium was performed by sending a questionnaire to the different centers asking their opinion and number of patients treated. There was a great similarity between the two surveys both for indications and total number of patients irradiated. For the most common indications (prevention of cheloids, heterotopic bone formation, hyperthyroid ophthalmopathy), there was a trend to use similar radiation technique following recent publications. In contrast, if the number of cases of macular degeneration is declining, the prevention of vessels restenosis is becoming more and more an indication. (authors)

An inquiry into chiropractors' intention to treat adolescent idiopathic scoliosis: a telephone survey.

Science.gov (United States)

Feise, R J

2001-01-01

The primary aim of this study was to (1) determine the clinical management approach of practicing chiropractors with regard to patients with adolescent idiopathic scoliosis and (2) measure the response rate of a telephone survey. A survey instrument was developed and pretested, and a case-specific clinical vignette was generated for a hypothetical typical 12-year-old girl with adolescent idiopathic scoliosis. The instrument addressed 3 domains: the specific management of idiopathic scoliosis, elements guiding the general selection of treatment recommendations, and demographics of respondents. The sample frame consisted of 62,000 US chiropractors, of whom 165 were randomly selected for the survey sample. Interviews were conducted by telephone through use of the tested survey instrument. The response rate was 69% (114/165). Of the 51 nonrespondents, 15 did not have a listed business telephone number and 24 were not in active practice. The response rate of those who met the inclusion criteria (practicing chiropractor with a listed telephone number) was 90% (114/126). The gender, chiropractic college, and years in practice of respondents in this survey were similar to those of respondents in 3 other national surveys. In general, the respondents would provide 6 months of "intensive" chiropractic therapy, then follow the patient for 4 years (near skeletal maturity). Eighty-two percent of respondents named diversified technique as their primary adjustive treatment, 87% would use exercise, and 30% would use electric muscle stimulation as an adjunct to manual therapy. Most surveyed chiropractors would use similar methods (frequency and length of treatment, manipulation technique, and exercise) in the treatment of patients with adolescent idiopathic scoliosis. A high response rate to a national survey can be achieved through use of telephone contact.

Complex surveys analysis of categorical data

CERN Document Server

Mukhopadhyay, Parimal

2016-01-01

The primary objective of this book is to study some of the research topics in the area of analysis of complex surveys which have not been covered in any book yet. It discusses the analysis of categorical data using three models: a full model, a log-linear model and a logistic regression model. It is a valuable resource for survey statisticians and practitioners in the field of sociology, biology, economics, psychology and other areas who have to use these procedures in their day-to-day work. It is also useful for courses on sampling and complex surveys at the upper-undergraduate and graduate levels. The importance of sample surveys today cannot be overstated. From voters’ behaviour to fields such as industry, agriculture, economics, sociology, psychology, investigators generally resort to survey sampling to obtain an assessment of the behaviour of the population they are interested in. Many large-scale sample surveys collect data using complex survey designs like multistage stratified cluster designs. The o...

Critical review of directional neutron survey meters

Science.gov (United States)

Balmer, Matthew J. I.; Gamage, Kelum A. A.; Taylor, Graeme C.

2014-01-01

Having been overlooked for many years, research is now starting to take into account the directional distribution of the neutron work place field. The impact of not taking this into account has led to overly conservative estimates of dose in neutron workplace fields. This paper provides a critical review of this existing research into directional survey meters which could improve these estimates of dose. Instruments which could be adapted for use as directional neutron survey meters are also considered within this review. Using Monte-Carlo techniques, two of the most promising existing designs are evaluated; a boron-doped liquid scintillator and a multi-detector directional spectrometer. As an outcome of these simulations, possible adaptations to these instruments are suggested with a view to improving the portability of the instrument.

Critical Review of Directional Neutron Survey Meters

International Nuclear Information System (INIS)

Balmer, M.J.I.; Gamage, K.A.A.; Taylor, G.C.

2013-06-01

Having been overlooked for many years, research is now starting to take into account the directional distribution of the neutron work place field. The impact of not taking this into account has led to overly conservative estimates of dose in neutron workplace fields. This paper provides a critical review of this existing research into directional survey meters which could improve these estimates of dose. Instruments which could be adapted for use as directional neutron survey meters are also considered within this review. Using Monte-Carlo techniques, two of the most promising existing designs are evaluated; a boron-doped liquid scintillator and a multi-detector directional spectrometer. As an outcome of these simulations, possible adaptations to these instruments are suggested with a view to improving the portability of the instrument. (authors)

Surveying Education

DEFF Research Database (Denmark)

Enemark, Stig

2009-01-01

In relation to surveying education there is one big question to be asked: Is the role of the surveyors changing? In a global perspective the answer will be "Yes". There is a big swing that could be entitled "From Measurement to Management". This does not imply that measurement is no longer....... In surveying education there are a range of other challenges to be faced. These relate to the focus on learning to learn; the need for flexible curriculum to deal with constant change; the move towards introducing virtual academy; the demand for creating a quality culture; and the perspective of lifelong...... on an efficient interaction between education, research, and professional practice....

[Formulation of technical specification for national survey of Chinese materia medica resources].

Science.gov (United States)

Guo, Lan-Ping; Lu, Jian-Wei; Zhang, Xiao-Bo; Zhao, Run-Huai; Zhang, Ben-Gang; Sun, Li-Ying; Huang, Lu-Qi

2013-04-01

According to the process of the technical specification (TS) design for the fourth national survey of the Chinese materia medica resources (CMMR), we analyzed the assignment and objectives of the national survey and pointed out that the differences about CMMR management around China, the distribution of CMMR and their habitat, the economic and technological level, and even enthusiasm and initiative of the staff, etc. are the most difficult points for TS design. And we adopt the principle of combination of the mandatory and flexibility in TS design. We fixed the key points which would affect the quality of national survey first, then proposed the framework of TS which including 3 parts of organization and 11 parts of technique itself. The framework will serve and lead the TS preparation, which will not only provide an action standard to the national survey but will also have a profound influence to the popularization and application of the survey technology of CMMR. [Key words

Is integrative use of techniques in psychotherapy the exception or the rule? Results of a national survey of doctoral-level practitioners.

Science.gov (United States)

Thoma, Nathan C; Cecero, John J

2009-12-01

This study sought to investigate the extent to which therapists endorse techniques outside of their self-identified orientation and which techniques are endorsed across orientations. A survey consisting of 127 techniques from 8 major theories of psychotherapy was administered via U.S. mail to a national random sample of doctoral-level psychotherapy practitioners. The 201 participants endorsed substantial numbers of techniques from outside their respective orientations. Many of these techniques were quite different from those of the core theories of the respective orientations. Further examining when and why experienced practitioners switch to techniques outside their primary orientation may help reveal where certain techniques fall short and where others excel, indicating a need for further research that taps the collective experience of practitioners. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

American Housing Survey (AHS)

Science.gov (United States)

Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

Cosmology with weak lensing surveys

International Nuclear Information System (INIS)

Munshi, Dipak; Valageas, Patrick; Waerbeke, Ludovic van; Heavens, Alan

2008-01-01

Weak gravitational lensing is responsible for the shearing and magnification of the images of high-redshift sources due to the presence of intervening matter. The distortions are due to fluctuations in the gravitational potential, and are directly related to the distribution of matter and to the geometry and dynamics of the Universe. As a consequence, weak gravitational lensing offers unique possibilities for probing the Dark Matter and Dark Energy in the Universe. In this review, we summarise the theoretical and observational state of the subject, focussing on the statistical aspects of weak lensing, and consider the prospects for weak lensing surveys in the future. Weak gravitational lensing surveys are complementary to both galaxy surveys and cosmic microwave background (CMB) observations as they probe the unbiased non-linear matter power spectrum at modest redshifts. Most of the cosmological parameters are accurately estimated from CMB and large-scale galaxy surveys, so the focus of attention is shifting to understanding the nature of Dark Matter and Dark Energy. On the theoretical side, recent advances in the use of 3D information of the sources from photometric redshifts promise greater statistical power, and these are further enhanced by the use of statistics beyond two-point quantities such as the power spectrum. The use of 3D information also alleviates difficulties arising from physical effects such as the intrinsic alignment of galaxies, which can mimic weak lensing to some extent. On the observational side, in the next few years weak lensing surveys such as CFHTLS, VST-KIDS and Pan-STARRS, and the planned Dark Energy Survey, will provide the first weak lensing surveys covering very large sky areas and depth. In the long run even more ambitious programmes such as DUNE, the Supernova Anisotropy Probe (SNAP) and Large-aperture Synoptic Survey Telescope (LSST) are planned. Weak lensing of diffuse components such as the CMB and 21 cm emission can also

Cosmology with weak lensing surveys

Energy Technology Data Exchange (ETDEWEB)

Munshi, Dipak [Institute of Astronomy, Madingley Road, Cambridge, CB3 OHA (United Kingdom); Astrophysics Group, Cavendish Laboratory, Madingley Road, Cambridge CB3 OHE (United Kingdom)], E-mail: munshi@ast.cam.ac.uk; Valageas, Patrick [Service de Physique Theorique, CEA Saclay, 91191 Gif-sur-Yvette (France); Waerbeke, Ludovic van [University of British Columbia, Department of Physics and Astronomy, 6224 Agricultural Road, Vancouver, BC V6T 1Z1 (Canada); Heavens, Alan [SUPA - Scottish Universities Physics Alliance, Institute for Astronomy, University of Edinburgh, Blackford Hill, Edinburgh EH9 3HJ (United Kingdom)

2008-06-15

Weak gravitational lensing is responsible for the shearing and magnification of the images of high-redshift sources due to the presence of intervening matter. The distortions are due to fluctuations in the gravitational potential, and are directly related to the distribution of matter and to the geometry and dynamics of the Universe. As a consequence, weak gravitational lensing offers unique possibilities for probing the Dark Matter and Dark Energy in the Universe. In this review, we summarise the theoretical and observational state of the subject, focussing on the statistical aspects of weak lensing, and consider the prospects for weak lensing surveys in the future. Weak gravitational lensing surveys are complementary to both galaxy surveys and cosmic microwave background (CMB) observations as they probe the unbiased non-linear matter power spectrum at modest redshifts. Most of the cosmological parameters are accurately estimated from CMB and large-scale galaxy surveys, so the focus of attention is shifting to understanding the nature of Dark Matter and Dark Energy. On the theoretical side, recent advances in the use of 3D information of the sources from photometric redshifts promise greater statistical power, and these are further enhanced by the use of statistics beyond two-point quantities such as the power spectrum. The use of 3D information also alleviates difficulties arising from physical effects such as the intrinsic alignment of galaxies, which can mimic weak lensing to some extent. On the observational side, in the next few years weak lensing surveys such as CFHTLS, VST-KIDS and Pan-STARRS, and the planned Dark Energy Survey, will provide the first weak lensing surveys covering very large sky areas and depth. In the long run even more ambitious programmes such as DUNE, the Supernova Anisotropy Probe (SNAP) and Large-aperture Synoptic Survey Telescope (LSST) are planned. Weak lensing of diffuse components such as the CMB and 21 cm emission can also

Minerals industry survey, 1984

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

This is the seventh edition of the statistical survey commissioned by the Australian Mining Industry Council. It represents the most comprehensive review of the financial position of the Australian minerals industry and provides timely financial data on the minerals industry. The tables of this survey have been prepared for AMIC by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies. For the purpose of the survey, the minerals industry has been defined as including exploration for, and extraction and primary processing of, minerals in Australia. The oil and gas industry is not included.

Scenario Evaluator for Electrical Resistivity survey pre-modeling tool

Science.gov (United States)

Terry, Neil; Day-Lewis, Frederick D.; Robinson, Judith L.; Slater, Lee D.; Halford, Keith J.; Binley, Andrew; Lane, John W.; Werkema, Dale D.

2017-01-01

Geophysical tools have much to offer users in environmental, water resource, and geotechnical fields; however, techniques such as electrical resistivity imaging (ERI) are often oversold and/or overinterpreted due to a lack of understanding of the limitations of the techniques, such as the appropriate depth intervals or resolution of the methods. The relationship between ERI data and resistivity is nonlinear; therefore, these limitations depend on site conditions and survey design and are best assessed through forward and inverse modeling exercises prior to field investigations. In this approach, proposed field surveys are first numerically simulated given the expected electrical properties of the site, and the resulting hypothetical data are then analyzed using inverse models. Performing ERI forward/inverse modeling, however, requires substantial expertise and can take many hours to implement. We present a new spreadsheet-based tool, the Scenario Evaluator for Electrical Resistivity (SEER), which features a graphical user interface that allows users to manipulate a resistivity model and instantly view how that model would likely be interpreted by an ERI survey. The SEER tool is intended for use by those who wish to determine the value of including ERI to achieve project goals, and is designed to have broad utility in industry, teaching, and research.

The Pan-STARRS1 Surveys

Science.gov (United States)

Chambers, Kenneth; Pan-STARRS Team

2018-01-01

The Pan-STARRS1 Surveys are complete and the first data release, DR1, is available from the Mikulski Archive for Space Telescopes (MAST) at the Space Telescope Science Institute. The data include a database of measured attributes of 3 billion objects, stacked images, and metadata of the 3pi Steradian Survey. The DR1 contains all stationary objects with mean and stack photometry registered on the GAIA astrometric frame. DR2 is in preparation and will be released this winter with all the individual epoch images and time domain photometry and forced photometry on the individual epoch images. The characteristics of the Pan-STARRS1 Surveys will be presented, including image quality, depth, cadence, and coverage. Measured attributes include PSF model magnitudes, aperture magnitudes, Kron Magnitudes, radial moments, Petrosian magnitudes, DeVaucoulers, Exponential, and Sersic magnitudes for extended objects. Images include total intensity, variance, and masks.An overview of the Pan-STARRS1 Surveys and data releases will be presented together with a brief description of the data collected since the end of the PS1 Science Consortium surveys, and the plans for the upcoming survey with PS1 and PS2 begining in February 2018.

Recent Trends in Veteran Unemployment as Measured in the Current Population Survey and the American Community Survey

National Research Council Canada - National Science Library

Savych, Bogdan; Klerman, Jacob A; Loughran, David S

2008-01-01

This technical report explores recent trends in the unemployment of recent veterans as estimated from two nationally representative surveys, the Current Population Survey "CPS" and the American Community Survey "ACS...

A Survey on Optimal Signal Processing Techniques Applied to Improve the Performance of Mechanical Sensors in Automotive Applications

Science.gov (United States)

Hernandez, Wilmar

2007-01-01

In this paper a survey on recent applications of optimal signal processing techniques to improve the performance of mechanical sensors is made. Here, a comparison between classical filters and optimal filters for automotive sensors is made, and the current state of the art of the application of robust and optimal control and signal processing techniques to the design of the intelligent (or smart) sensors that today's cars need is presented through several experimental results that show that the fusion of intelligent sensors and optimal signal processing techniques is the clear way to go. However, the switch between the traditional methods of designing automotive sensors and the new ones cannot be done overnight because there are some open research issues that have to be solved. This paper draws attention to one of the open research issues and tries to arouse researcher's interest in the fusion of intelligent sensors and optimal signal processing techniques.

A comparison of a postal survey and mixed-mode survey using a questionnaire on patients' experiences with breast care.

Science.gov (United States)

Zuidgeest, Marloes; Hendriks, Michelle; Koopman, Laura; Spreeuwenberg, Peter; Rademakers, Jany

2011-09-27

The Internet is increasingly considered to be an efficient medium for assessing the quality of health care seen from the patients' perspective. Potential benefits of Internet surveys such as time efficiency, reduced effort, and lower costs should be balanced against potential weaknesses such as low response rates and accessibility for only a subset of potential participants. Combining an Internet questionnaire with a traditional paper follow-up questionnaire (mixed-mode survey) can possibly compensate for these weaknesses and provide an alternative to a postal survey. To examine whether there are differences between a mixed-mode survey and a postal survey in terms of respondent characteristics, response rate and time, quality of data, costs, and global ratings of health care or health care providers (general practitioner, hospital care in the diagnostic phase, surgeon, nurses, radiotherapy, chemotherapy, and hospital care in general). Differences between the two surveys were examined in a sample of breast care patients using the Consumer Quality Index Breast Care questionnaire. We selected 800 breast care patients from the reimbursement files of Dutch health insurance companies. We asked 400 patients to fill out the questionnaire online followed by a paper reminder (mixed-mode survey) and 400 patients, matched by age and gender, received the questionnaire by mail only (postal survey). Both groups received three reminders. The respondents to the two surveys did not differ in age, gender, level of education, or self-reported physical and psychological health (all Ps > .05). In the postal survey, the questionnaires were returned 20 days earlier than in the mixed-mode survey (median 12 and 32 days, respectively; P survey (€2 per questionnaire). Moreover, there were fewer missing items (3.4% versus 4.4%, P = .002) and fewer invalid answers (3.2% versus 6.2%, P survey than in the postal survey. The answers of the two respondent groups on the global ratings did not

A Comparison of a Postal Survey and Mixed-Mode Survey Using a Questionnaire on Patients’ Experiences With Breast Care

Science.gov (United States)

Hendriks, Michelle; Koopman, Laura; Spreeuwenberg, Peter; Rademakers, Jany

2011-01-01

Background The Internet is increasingly considered to be an efficient medium for assessing the quality of health care seen from the patients’ perspective. Potential benefits of Internet surveys such as time efficiency, reduced effort, and lower costs should be balanced against potential weaknesses such as low response rates and accessibility for only a subset of potential participants. Combining an Internet questionnaire with a traditional paper follow-up questionnaire (mixed-mode survey) can possibly compensate for these weaknesses and provide an alternative to a postal survey. Objective To examine whether there are differences between a mixed-mode survey and a postal survey in terms of respondent characteristics, response rate and time, quality of data, costs, and global ratings of health care or health care providers (general practitioner, hospital care in the diagnostic phase, surgeon, nurses, radiotherapy, chemotherapy, and hospital care in general). Methods Differences between the two surveys were examined in a sample of breast care patients using the Consumer Quality Index Breast Care questionnaire. We selected 800 breast care patients from the reimbursement files of Dutch health insurance companies. We asked 400 patients to fill out the questionnaire online followed by a paper reminder (mixed-mode survey) and 400 patients, matched by age and gender, received the questionnaire by mail only (postal survey). Both groups received three reminders. Results The respondents to the two surveys did not differ in age, gender, level of education, or self-reported physical and psychological health (all Ps > .05). In the postal survey, the questionnaires were returned 20 days earlier than in the mixed-mode survey (median 12 and 32 days, respectively; P survey (€2 per questionnaire). Moreover, there were fewer missing items (3.4% versus 4.4%, P = .002) and fewer invalid answers (3.2% versus 6.2%, P survey than in the postal survey. The answers of the two respondent

Motion Transplantation Techniques: A Survey

NARCIS (Netherlands)

van Basten, Ben; Egges, Arjan

2012-01-01

During the past decade, researchers have developed several techniques for transplanting motions. These techniques transplant a partial auxiliary motion, possibly defined for a small set of degrees of freedom, on a base motion. Motion transplantation improves motion databases' expressiveness and

Biological variables for the site survey of surface ecosystems - existing data and survey methods

International Nuclear Information System (INIS)

Kylaekorpi, Lasse; Berggren, Jens; Larsson, Mats; Liberg, Maria; Rydgren, Bernt

2000-06-01

In the process of selecting a safe and environmentally acceptable location for the deep level repository of nuclear waste, site surveys will be carried out. These site surveys will also include studies of the biota at the site, in order to assure that the chosen site will not conflict with important ecological interests, and to establish a thorough baseline for future impact assessments and monitoring programmes. As a preparation to the site survey programme, a review of the variables that need to be surveyed is conducted. This report contains the review for some of those variables. For each variable, existing data sources and their characteristics are listed. For those variables for which existing data sources are inadequate, suggestions are made for appropriate methods that will enable the establishment of an acceptable baseline. In this report the following variables are reviewed: Fishery, Landscape, Vegetation types, Key biotopes, Species (flora and fauna), Red-listed species (flora and fauna), Biomass (flora and fauna), Water level, water retention time (incl. water body and flow), Nutrients/toxins, Oxygen concentration, Layering, stratification, Light conditions/transparency, Temperature, Sediment transport, (Marine environments are excluded from this review). For a major part of the variables, the existing data coverage is most likely insufficient. Both the temporal and/or the geographical resolution is often limited, which means that complementary surveys must be performed during (or before) the site surveys. It is, however, in general difficult to make exact judgements on the extent of existing data, and also to give suggestions for relevant methods to use in the site surveys. This can be finally decided only when the locations for the sites are decided upon. The relevance of the different variables also depends on the environmental characteristics of the sites. Therefore, we suggest that when the survey sites are selected, an additional review is

Biological variables for the site survey of surface ecosystems - existing data and survey methods

Energy Technology Data Exchange (ETDEWEB)

Kylaekorpi, Lasse; Berggren, Jens; Larsson, Mats; Liberg, Maria; Rydgren, Bernt [SwedPower AB, Stockholm (Sweden)

2000-06-01

In the process of selecting a safe and environmentally acceptable location for the deep level repository of nuclear waste, site surveys will be carried out. These site surveys will also include studies of the biota at the site, in order to assure that the chosen site will not conflict with important ecological interests, and to establish a thorough baseline for future impact assessments and monitoring programmes. As a preparation to the site survey programme, a review of the variables that need to be surveyed is conducted. This report contains the review for some of those variables. For each variable, existing data sources and their characteristics are listed. For those variables for which existing data sources are inadequate, suggestions are made for appropriate methods that will enable the establishment of an acceptable baseline. In this report the following variables are reviewed: Fishery, Landscape, Vegetation types, Key biotopes, Species (flora and fauna), Red-listed species (flora and fauna), Biomass (flora and fauna), Water level, water retention time (incl. water body and flow), Nutrients/toxins, Oxygen concentration, Layering, stratification, Light conditions/transparency, Temperature, Sediment transport, (Marine environments are excluded from this review). For a major part of the variables, the existing data coverage is most likely insufficient. Both the temporal and/or the geographical resolution is often limited, which means that complementary surveys must be performed during (or before) the site surveys. It is, however, in general difficult to make exact judgements on the extent of existing data, and also to give suggestions for relevant methods to use in the site surveys. This can be finally decided only when the locations for the sites are decided upon. The relevance of the different variables also depends on the environmental characteristics of the sites. Therefore, we suggest that when the survey sites are selected, an additional review is

The Effects of Halo Assembly Bias on Self-Calibration in Galaxy Cluster Surveys

Energy Technology Data Exchange (ETDEWEB)

Wu, Hao-Yi; Rozo, Eduardo; Wechsler, Risa H.

2008-08-07

Self-calibration techniques for analyzing galaxy cluster counts utilize the abundance and the clustering amplitude of dark matter halos. These properties simultaneously constrain cosmological parameters and the cluster observable-mass relation. It was recently discovered that the clustering amplitude of halos depends not only on the halo mass, but also on various secondary variables, such as the halo formation time and the concentration; these dependences are collectively termed 'assembly bias'. Applying modified Fisher matrix formalism, we explore whether these secondary variables have a significant impact on the study of dark energy properties using the self-calibration technique in current (SDSS) and the near future (DES, SPT, and LSST) cluster surveys. The impact of the secondary dependence is determined by (1) the scatter in the observable-mass relation and (2) the correlation between observable and secondary variables. We find that for optical surveys, the secondary dependence does not significantly influence an SDSS-like survey; however, it may affect a DES-like survey (given the high scatter currently expected from optical clusters) and an LSST-like survey (even for low scatter values and low correlations). For an SZ survey such as SPT, the impact of secondary dependence is insignificant if the scatter is 20% or lower but can be enhanced by the potential high scatter values introduced by a highly-correlated background. Accurate modeling of the assembly bias is necessary for cluster self-calibration in the era of precision cosmology.

Precise Detection of Buried Underground Utilities by Non-destructive Electromagnetic Survey

International Nuclear Information System (INIS)

Shon, Ho Woong; Lee, Seung Hee; Lee, Kang Won

2002-01-01

To detect the position and depth of buried underground utilities, method of Ground Penetrating Radar(GPR) survey is the most commonly used. However, the skin-depth of GPR is very shallow, and in the places where subsurface materials are not homogeneous and are compose of clays and/or salts and gravels, GPR method has limitations in application and interpretation. The aim of this study is to overcome these limitations of GPR survey. For this purpose the site where the GPR survey is unsuccessful to detect the underground big pipes is selected, and soil tests were conducted to confirm the reason why GPR method was not applicable. Non-destructive high-frequency electromagnetic (HFEM) survey was newly developed and was applied in the study area to prove the effectiveness of this new technique. The frequency ranges 2kHz∼4MHz and the skin depth is about 30m. The HFEM measures the electric field and magnetic field perpendicular to each other to get the impedance from which vertical electric resistivity distribution at the measured point can be deduced. By adopting the capacitive coupled electrodes, it can make the measuring time shorter, and can be applied to the places covered by asphalt an and/or concrete. In addition to the above mentioned advantages, noise due to high-voltage power line is much reduced by stacking the signals. As a result, the HFEM was successful in detecting the buried underground objects. Therefore this method is a promising new technique that can be applied in the lots of fields, such as geotechnical and archaeological surveys

Land Survey from Unmaned Aerial Veichle

Science.gov (United States)

Peterman, V.; Mesarič, M.

2012-07-01

In this paper we present, how we use a quadrocopter unmanned aerial vehicle with a camera attached to it, to do low altitude photogrammetric land survey. We use the quadrocopter to take highly overlapping photos of the area of interest. A "structure from motion" algorithm is implemented to get parameters of camera orientations and to generate a sparse point cloud representation of objects in photos. Than a patch based multi view stereo algorithm is applied to generate a dense point cloud. Ground control points are used to georeference the data. Further processing is applied to generate digital orthophoto maps, digital surface models, digital terrain models and assess volumes of various types of material. Practical examples of land survey from a UAV are presented in the paper. We explain how we used our system to monitor the reconstruction of commercial building, then how our UAV was used to assess the volume of coal supply for Ljubljana heating plant. Further example shows the usefulness of low altitude photogrammetry for documentation of archaeological excavations. In the final example we present how we used our UAV to prepare an underlay map for natural gas pipeline's route planning. In the final analysis we conclude that low altitude photogrammetry can help bridge the gap between laser scanning and classic tachymetric survey, since it offers advantages of both techniques.

Implementation of Department of Defense Survey Burden Action Plan - Reducing Survey Burden, Cost and Duplication

Science.gov (United States)

2017-08-23

vulnerable populations (e.g., minors); or 3) sensitive topics (e.g., gender relations, discrimination , UCMJ violations) to improve tracking of survey...e.g., gender relations, discrimination , UCMJ violations) to improve tracking of survey burden. The applicable ISSCC-member Survey Office will...their families per year; or 2) vulnerable populations (e.g., minors); or 3) sensitive topics (e.g., gender relations, discrimination , UCMJ violations

National Geodetic Survey's Airport Aerial Photography

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The National Geodetic Survey (NGS), formerly part of the U.S. Coast and Geodetic Survey, has been performing Aeronautical surveys since the 1920's. NGS, in...

National Sample Survey of Registered Nurses

Data.gov (United States)

U.S. Department of Health & Human Services — The National Sample Survey of Registered Nurses (NSSRN) Download makes data from the survey readily available to users in a one-stop download. The Survey has been...

IT Barometer survey, Denmark

DEFF Research Database (Denmark)

Howard, Rob

1998-01-01

Survey results from Danish architects, engineers, contractors and property managers in the construction industry concerning their use of computers, communications, problems and needs.......Survey results from Danish architects, engineers, contractors and property managers in the construction industry concerning their use of computers, communications, problems and needs....

The Modular Optical Underwater Survey System

Directory of Open Access Journals (Sweden)

Ruhul Amin

2017-10-01

Full Text Available The Pacific Islands Fisheries Science Center deploys the Modular Optical Underwater Survey System (MOUSS to estimate the species-specific, size-structured abundance of commercially-important fish species in Hawaii and the Pacific Islands. The MOUSS is an autonomous stereo-video camera system designed for the in situ visual sampling of fish assemblages. This system is rated to 500 m and its low-light, stereo-video cameras enable identification, counting, and sizing of individuals at a range of 0.5–10 m. The modular nature of MOUSS allows for the efficient and cost-effective use of various imaging sensors, power systems, and deployment platforms. The MOUSS is in use for surveys in Hawaii, the Gulf of Mexico, and Southern California. In Hawaiian waters, the system can effectively identify individuals to a depth of 250 m using only ambient light. In this paper, we describe the MOUSS’s application in fisheries research, including the design, calibration, analysis techniques, and deployment mechanism.

Using decision pathway surveys to inform climate engineering policy choices.

Science.gov (United States)

Gregory, Robin; Satterfield, Terre; Hasell, Ariel

2016-01-19

Over the coming decades citizens living in North America and Europe will be asked about a variety of new technological and behavioral initiatives intended to mitigate the worst impacts of climate change. A common approach to public input has been surveys whereby respondents' attitudes about climate change are explained by individuals' demographic background, values, and beliefs. In parallel, recent deliberative research seeks to more fully address the complex value tradeoffs linked to novel technologies and difficult ethical questions that characterize leading climate mitigation alternatives. New methods such as decision pathway surveys may offer important insights for policy makers by capturing much of the depth and reasoning of small-group deliberations while meeting standard survey goals including large-sample stakeholder engagement. Pathway surveys also can help participants to deepen their factual knowledge base and arrive at a more complete understanding of their own values as they apply to proposed policy alternatives. The pathway results indicate more fully the conditional and context-specific nature of support for several "upstream" climate interventions, including solar radiation management techniques and carbon dioxide removal technologies.

Retirement Applicant Satisfaction Survey Results

Data.gov (United States)

Social Security Administration — This dataset contains information about the Retirement Applicant Survey (RAS). The survey measured satisfaction results with the retirement application process. The...

SuML: A Survey Markup Language for Generalized Survey Encoding

Science.gov (United States)

Barclay, MW; Lober, WB; Karras, BT

2002-01-01

There is a need in clinical and research settings for a sophisticated, generalized, web based survey tool that supports complex logic, separation of content and presentation, and computable guidelines. There are many commercial and open source survey packages available that provide simple logic; few provide sophistication beyond “goto” statements; none support the use of guidelines. These tools are driven by databases, static web pages, and structured documents using markup languages such as eXtensible Markup Language (XML). We propose a generalized, guideline aware language and an implementation architecture using open source standards.

Heavy mineral survey for uranium in the Philippines

International Nuclear Information System (INIS)

Tauchid, M.; Santos, G. Jr.; Hernandez, E.; Bernido, C.

1983-01-01

A reconnaissance geochemical survey for uranium was carried out in the island of Samar in the Philippines covering an area of about 13,000 km 2 . The survey represents the first practical demonstration in the country of the use of geochemical techniques to outline large possibly interesting areas within a short period and with modest monetary expenditure. The survey entailed the systematic collection of 1530 heavy mineral concentrates, stream sediments and water samples, and the measurement of radioactivity at 510 stations along the major drainage system of Samar. The average sampling density was 1/20-25 km 2 . All solid samples were analysed for U, Cu, Pb, Zn, Mn, Ag, Co and Ni. Uranium, radon, conductivity and pH were measured in most of the water samples collected. More than 9000 chemical determinations were made. Results of the survey clearly point to the usefulness of heavy mineral sampling at the low density level of observation. The non-magnetic fraction of the heavy mineral concentrates outlined strong and well defined areas of interest for most of the elements analysed. Stream sediment sampling at this sampling density indicated weaker, less clearly defined anomalies. Uranium and radon analyses performed on stream water samples and ground scintillometer readings provided invaluable complementary information relevant to the evaluation of the island's uranium potential. (author)

Biodiversity surveys in the East Usambara Mountains: Preliminary ...

African Journals Online (AJOL)

Biodiversity surveys were initiated in the East Usambara Mountains in 1995 to provide baseline information on the biological values of the forests for management planning and monitoring, and to train field staff in the use of biological inventory techniques. They were conducted in ten-week field phases. Vegetation plots ...

Survey Methods, Traditional, Public Opinion Polling

DEFF Research Database (Denmark)

Elmelund-Præstekær, Christian; Hopmann, David Nicolas; Pedersen, Rasmus Tue

2017-01-01

Traditional public opinion polls are surveys in which a random sample of a given population is asked questions about their attitudes, knowledge, or behavior. If conducted properly, the answers from such surveys are approximately representative of the entire population. Traditional public opinion...... polling is typically based on four different methods of data gathering, or combinations hereof: face-to-face, postal surveys, phone surveys, and web surveys. Given that opinion polls are based on a sample, we cannot be sure that the sample reflects public opinion perfectly, however—even if randomness...... is perfect. Moreover, responses may be highly dependent on the contextual information provided with the question. Also, it may be difficult to capture past or complex causes of attitudes or behavior. In short, surveys are a precise way of measuring public opinion, but they do not come without challenges....

Survey of public participation potential regarding the Muria NPP program

International Nuclear Information System (INIS)

Yarianto-SBS; Sri Hariani Syarif; Heni Susiati; Imam Hamzah; Fepriadi

2003-01-01

Socio-culture aspect is a part of site feasibility evaluation of Nuclear Power Plant (NPP)program. Indonesia is under going democratization, therefore the paradigm of development has also been changed where the people have freedom or liberty and they can express their opinion independently. The people are significant factor that involving in the decision making of regional development.Even the socio-culture, such as social riot can reject the site. Therefore socio-culture aspect should be considered in the NPP site evaluation. The first step of the study,mapping of public participation potential should be conducted by field survey. The method used in there search is quantitative approach with field survey guided by questioner without any treatment of object sampled. Qualitative approach was also conducted by in-depth interview technique to collect more detailed information. Information were collected from general public without any stratification in the 10 km radius from NPP site. Sampling method used was full random sampling technique. The results of survey show that the most of the people have significant potential for participating in the NPP Program. Conducive atmosphere should be maintained by social setting, therefore the present good momentum will not be lost. (author)

Organizational and leadership perceptions assessment: opportunities and challenges using the Baldrige companion surveys.

Science.gov (United States)

Colombo, Lisa M; Perla, Rocco J; Carifio, James; Bernhardt, Jean M; Slayton, Val W

2011-01-01

Combining the use of employee perception surveys with sound analytical techniques and models is critical to capturing high quality data from which effective decisions can be made in complex healthcare settings. This study used the Baldrige Award companion surveys with an analysis of variance (ANOVA) framework to identify discordant perceptions of hospital staff and leadership in the areas of customer focus, knowledge management, and results that were significant at the 0.05 and 0.01 levels. Senior leaders in the organization found the ANOVA framework helpful as they interpreted results from the Baldrige companion surveys and planned future improvement activities. During the execution of our study a number of difficulties and challenges arose that are not uncommon to survey administration in smaller settings, such as community hospitals, or in larger hospital settings with no research staff or research staff with relevant psychometric expertise. Our experience suggests that the Baldrige companion survey process would be enhanced by providing organizations with general guidance and protocols for optimal survey administration and data analysis. The purpose of this article is to outline the ANOVA model we used with the Baldrige companion surveys and to provide guidance related to the administration and analysis of these companion surveys for those that use them. © 2010 National Association for Healthcare Quality.

76 FR 79054 - Direct Investment Surveys: BE-12, Benchmark Survey of Foreign Direct Investment in the United States

Science.gov (United States)

2011-12-21

...] RIN 0691-AA80 Direct Investment Surveys: BE-12, Benchmark Survey of Foreign Direct Investment in the... reporting requirements for the 2012 BE-12, Benchmark Survey of Foreign Direct Investment in the United... survey covers the universe of foreign direct investment in the United States, and is BEA's most detailed...

Methodology for performing surveys for fixed contamination

International Nuclear Information System (INIS)

Durham, J.S.; Gardner, D.L.

1994-10-01

This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

Minerals industry survey 1987

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

This is the eleventh Minerals Industry Survey produced by the Australian Mining Industry Council. It represents an invaluable time series on the minerals industry's financial performance, as well as an up to date description of the industry for the latest financial year. The survey has been conceived as a supplement to and expansion of the various Australian Bureau of Statistics and Bureau of Mineral Resources, Geology and Geophysics publications which describe the exploration, mining and smelting and refining industries in Australia. The tables in this survey have been prepared by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies.

Cosmological analysis of galaxy clusters surveys in X-rays

International Nuclear Information System (INIS)

Clerc, N.

2012-01-01

Clusters of galaxies are the most massive objects in equilibrium in our Universe. Their study allows to test cosmological scenarios of structure formation with precision, bringing constraints complementary to those stemming from the cosmological background radiation, supernovae or galaxies. They are identified through the X-ray emission of their heated gas, thus facilitating their mapping at different epochs of the Universe. This report presents two surveys of galaxy clusters detected in X-rays and puts forward a method for their cosmological interpretation. Thanks to its multi-wavelength coverage extending over 10 sq. deg. and after one decade of expertise, the XMM-LSS allows a systematic census of clusters in a large volume of the Universe. In the framework of this survey, the first part of this report describes the techniques developed to the purpose of characterizing the detected objects. A particular emphasis is placed on the most distant ones (z ≥ 1) through the complementarity of observations in X-ray, optical and infrared bands. Then the X-CLASS survey is fully described. Based on XMM archival data, it provides a new catalogue of 800 clusters detected in X-rays. A cosmological analysis of this survey is performed thanks to 'CR-HR' diagrams. This new method self-consistently includes selection effects and scaling relations and provides a means to bypass the computation of individual cluster masses. Propositions are made for applying this method to future surveys as XMM-XXL and eRosita. (author) [fr

A survey on the task analysis methods and techniques for nuclear power plant operators

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Heui; Chun, Se Woo; Suh, Sang Moon; Lee, Jung Woon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-04-01

We have surveyed techniques and methods of task analysis from very traditional ones to recently developed ones that are being applicated to various industrial fields. We compare each other and analyse their fundamental characteristics and methodological specification in order to find a proper one enough to apply to nuclear power plant operators tasks. Generally, the fundamental process of task analyses has well been understandable, but its process of application in practice has not been so simple due to the wide and varying range of applications according to specific domain. Operators` tasks in NPPs are supposed to be performed strictly according to operational procedures written in a text and well trained, so the method of task analysis for operators` tasks in NPPs can be established to have its unique characteristics of task analysis based on the operational procedures. 8 figs., 10 tabs., 18 refs. (Author).

A survey on the task analysis methods and techniques for nuclear power plant operators

International Nuclear Information System (INIS)

Lee, Yong Heui; Chun, Se Woo; Suh, Sang Moon; Lee, Jung Woon

1994-04-01

We have surveyed techniques and methods of task analysis from very traditional ones to recently developed ones that are being applicated to various industrial fields. We compare each other and analyse their fundamental characteristics and methodological specification in order to find a proper one enough to apply to nuclear power plant operators tasks. Generally, the fundamental process of task analyses has well been understandable, but its process of application in practice has not been so simple due to the wide and varying range of applications according to specific domain. Operators' tasks in NPPs are supposed to be performed strictly according to operational procedures written in a text and well trained, so the method of task analysis for operators' tasks in NPPs can be established to have its unique characteristics of task analysis based on the operational procedures. 8 figs., 10 tabs., 18 refs. (Author)

Applications of Calendar Instruments in Social Surveys: a review

NARCIS (Netherlands)

Glasner, T.J.; Vaart, van der W.

2009-01-01

Retrospective reports in survey interviews and questionnaires are subject to many types of recall error, which affect completeness, consistency, and dating accuracy. Concerns about this problem have led to the development of so-called calendar instruments, or timeline techniques. These aided recall

Analysis of Employee's Survey for Preventing Human-Errors

Energy Technology Data Exchange (ETDEWEB)

Sung, Chanho; Kim, Younggab; Joung, Sanghoun [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2013-10-15

Human errors in nuclear power plant can cause large and small events or incidents. These events or incidents are one of main contributors of reactor trip and might threaten the safety of nuclear plants. To prevent human-errors, KHNP(nuclear power plants) introduced 'Human-error prevention techniques' and have applied the techniques to main parts such as plant operation, operation support, and maintenance and engineering. This paper proposes the methods to prevent and reduce human-errors in nuclear power plants through analyzing survey results which includes the utilization of the human-error prevention techniques and the employees' awareness of preventing human-errors. With regard to human-error prevention, this survey analysis presented the status of the human-error prevention techniques and the employees' awareness of preventing human-errors. Employees' understanding and utilization of the techniques was generally high and training level of employee and training effect on actual works were in good condition. Also, employees answered that the root causes of human-error were due to working environment including tight process, manpower shortage, and excessive mission rather than personal negligence or lack of personal knowledge. Consideration of working environment is certainly needed. At the present time, based on analyzing this survey, the best methods of preventing human-error are personal equipment, training/education substantiality, private mental health check before starting work, prohibit of multiple task performing, compliance with procedures, and enhancement of job site review. However, the most important and basic things for preventing human-error are interests of workers and organizational atmosphere such as communication between managers and workers, and communication between employees and bosses.

Telephone survey to investigate relationships between onychectomy or onychectomy technique and house soiling in cats.

Science.gov (United States)

Gerard, Amanda F; Larson, Mandy; Baldwin, Claudia J; Petersen, Christine

2016-09-15

OBJECTIVE To determine whether associations existed between onychectomy or onychectomy technique and house soiling in cats. DESIGN Cross-sectional study. SAMPLE 281 owners of 455 cats in Polk County, Iowa, identified via a list of randomly selected residential phone numbers of cat owners in that region. PROCEDURES A telephone survey was conducted to collect information from cat owners on factors hypothesized a priori to be associated with house soiling, including cat sex, reproductive status, medical history, and onychectomy history. When cats that had undergone onychectomy were identified, data were collected regarding the cat's age at the time of the procedure and whether a carbon dioxide laser (CDL) had been used. Information on history of house soiling behavior (urinating or defecating outside the litter box) was also collected. RESULTS Onychectomy technique was identified as a risk factor for house soiling. Cats for which a non-CDL technique was used had a higher risk of house soiling than cats for which the CDL technique was used. Cats that had undergone onychectomy and that lived in a multicat (3 to 5 cats) household were more than 3 times as likely to have house soiled as were single-housed cats with intact claws. CONCLUSIONS AND CLINICAL RELEVANCE Results of this cross-sectional study suggested that use of the CDL technique for onychectomy could decrease the risk of house soiling by cats relative to the risk associated with other techniques. This and other findings can be used to inform the decisions of owners and veterinarians when considering elective onychectomy for cats.

Monitoring the Future 2014 Survey Results

Science.gov (United States)

... Statistics » Infographics » Monitoring the Future 2014 Survey Results Monitoring the Future 2014 Survey Results Email Facebook Twitter ... embed/iQDhYlYp81c?rel=0 Text Description of Infographic Monitoring the Future is an annual survey of 8th, ...

Tuberculosis prevalence surveys: rationale and cost

NARCIS (Netherlands)

Glaziou, P.; van der Werf, M. J.; Onozaki, I.; Dye, C.; Borgdorff, M. W.; Chiang, C.-Y.; Cobelens, F.; Enarson, D. A.; Gopi, P. G.; Holtz, T. H.; Kim, S. J.; van Leth, F.; Lew, W.-J.; Lonnroth, K.; van Maaren, P.; Narayanan, P. R.; Williams, B.

2008-01-01

This article is the first of the educational series 'Assessing tuberculosis (TB) prevalence through population-based surveys'. The series will give overall guidance in conducting cross-sectional surveys of pulmonary TB (PTB) disease. TB prevalence surveys are most valuable in areas where

A Survey of Civilian Employee Attitudes

Science.gov (United States)

1989-06-01

U.S. Army Troop Support Command. The survey was conducted as part of an organizational diagnosis in preparation for the implementation of a civilian...survey as part of the program evaluation is recommended. Keywords: Surveys; Questionnaires; Employee attitudes; Attitude measurement; Organizational diagnosis .

Liquid scintillation spectrometer survey 155Eu liquid activity

International Nuclear Information System (INIS)

Zhang Zuhua

2002-01-01

In the countrywide contrasting survey of 155 Eu activity, 155 Eu liquid activity was determined for the first time through using liquid scintillation spectrometer survey 155 Eu β ray. In survey total uncertainty, determining activity accord with determining activity average value of all a wide variety of survey instrument entering into contrasting survey. But using liquid scintillation spectrometer survey, it is simple and save time, is beyond compare for other survey method. It indicate liquid scintillation spectrometer survey β-γ nuclide activity is effective as well

Autonomous Sea-Ice Thickness Survey

Science.gov (United States)

2016-06-01

the conductivity of an infinitely thick slab of sea ice. Ice thickness, Hice, is then obtained by subtracting the height of the ...Thickness Survey of Sea Ice Runway” ERDC/CRREL SR-16-4 ii Abstract We conducted an autonomous survey of sea -ice thickness using the Polar rover Yeti...efficiency relative to manual surveys routinely con- ducted to assess the safety of roads and runways constructed on the sea ice. Yeti executed the

Spatial housing economics: a survey

OpenAIRE

Meen, Geoff

2016-01-01

This introduction to the Virtual Special Issue surveys the development of spatial housing economics from its roots in neo-classical theory, through more recent developments in social interactions modelling, and touching on the role of institutions, path dependence and economic history. The survey also points to some of the more promising future directions for the subject that are beginning to appear in the literature. The survey covers elements hedonic models, spatial econometrics, neighbourh...

On Survey Data Analysis in Corporate Finance

OpenAIRE

Serita, Toshio

2008-01-01

Recently, survey data analysis has emerged as a new method for testing hypotheses andfor clarifying the relative importance of different factors in corporate finance decisions. This paper investigates the advantages and drawbacks of survey data analysis, methodology of survey data analysis such as questionnaire design, and analytical methods for survey data, incomparison with traditional large sample analysis. We show that survey data analysis does not replace traditional large sample analysi...

Transit and radial velocity survey efficiency comparison for a habitable zone Earth

International Nuclear Information System (INIS)

Burke, Christopher J.; McCullough, P. R.

2014-01-01

Transit and radial velocity searches are two techniques for identifying nearby extrasolar planets to Earth that transit bright stars. Identifying a robust sample of these exoplanets around bright stars for detailed atmospheric characterization is a major observational undertaking. In this study we describe a framework that answers the question of whether a transit or radial velocity survey is more efficient at finding transiting exoplanets given the same amount of observing time. Within the framework we show that a transit survey's window function can be approximated using the hypergeometric probability distribution. We estimate the observing time required for a transit survey to find a transiting Earth-sized exoplanet in the habitable zone (HZ) with an emphasis on late-type stars. We also estimate the radial velocity precision necessary to detect the equivalent HZ Earth-mass exoplanet that also transits when using an equal amount of observing time as the transit survey. We find that a radial velocity survey with σ rv ∼ 0.6 m s –1 precision has comparable efficiency in terms of observing time to a transit survey with the requisite photometric precision σ phot ∼ 300 ppm to find a transiting Earth-sized exoplanet in the HZ of late M dwarfs. For super-Earths, a σ rv ∼ 2.0 m s –1 precision radial velocity survey has comparable efficiency to a transit survey with σ phot ∼ 2300 ppm.

Surveying for architectural students: as simple as possible - as much as necessary

Science.gov (United States)

Mayer, I.; Mitterecker, T.

2017-08-01

More and more, existing buildings - and particularly historic buildings - are becoming part of the daily business of every architect. Planning and designing in the field of architectural heritage requires not only knowledge of contemporary building techniques, design processes and national and international guidelines, but also a deep understanding of architectural heritage, its evolution and genesis, the building techniques that have been applied, materials used, traditions, etc. In many cases, it is indispensable to perform a detailed building survey and building research to achieve an adequate design concept. The Department of History of Architecture and Building Archaeology of TU Wien has an extensive tradition of building research and over the course of the past 10 years, has developed a teaching workflow to introduce architectural students to building archaeology und surveying methods for building research. A sophisticated, temporally interwoven combination of courses and lectures on different topics related to building archaeology and surveying rapidly gives the architectural students the right tools for this important but often neglected task.

78 FR 64911 - 2013 Company Organization Survey

Science.gov (United States)

2013-10-30

... Organization Survey AGENCY: Bureau of the Census, Commerce. ACTION: Notice of Determination. SUMMARY: The Bureau of the Census (Census Bureau) is conducting the 2013 Company Organization Survey. The survey's... organizations included in the survey, and additional copies are available upon written request to the Director...

78 FR 20119 - Broad Stakeholder Survey

Science.gov (United States)

2013-04-03

... DEPARTMENT OF HOMELAND SECURITY [Docket No. DHS-2012-0042] Broad Stakeholder Survey AGENCY... concerning the Broad Stakeholder Survey. DHS previously published this ICR in the Federal Register on August... across the Nation. The Broad Stakeholder Survey is designed to gather stakeholder feedback on the...

Implementation Of Carlson Survey Software2009 In Survey Works And Comparison With CDS Software

Directory of Open Access Journals (Sweden)

Mohamed Faraj EL Megrahi

2017-02-01

Full Text Available The automation surveying is one of the most influential changes to surveying concept and profession has had to go through, this has taken effect in two major courses, hardware (instrumentation used in data collection and presentation, and the software (the applications used in data processing and manipulation. Automation is majorly computer based and just like all such systems is subject to improvement often; this is manifested in the new kinds of instrumentation models every few years such as total station and newer versions of software’s. The software that has the potential to completely affect survey automation is Carlson Surveying Software. This when coupled with total station as data processing and collection methods respectively; is capable of greatly improving productivity while reducing time and cost required in the long run. However, it is only natural for users to desire a competent software and be able to choose from what is available on the market based on guided research and credible information from previous researches. Such studies not only help in choice of software but are also handy when it comes to testing approaches and recommending improvements based on advantages and disadvantages to the manufacturers to help in advancement in the software industry for better and more comfortable use. The expected outcome of the research is a successful implementation of Carlson survey 2009 software in survey works and a comparison with other existing software like Civil Design Software (CDS was highlighted its advantages and disadvantages.

Verification Survey of Uranium Mine Remediation

International Nuclear Information System (INIS)

Ron, Stager

2009-01-01

The Canadian Nuclear Safety Commission (CNSC) contracted an independent verification of an intensive gamma radiation survey conducted by a mining company to demonstrate that remediation of disturbed areas was complete. This site was the first of the recent mines being decommissioned in Canada and experience gained here may be applied to other mines being decommissioned in the future. The review included examination of the site-specific basis for clean-up criteria and ALARA as required by CNSC guidance. A paper review of the company report was conducted to determine if protocols were followed and that the summarized results could be independently reproduced. An independent verification survey was conducted on parts of the site and comparisons were made between gamma radiation measurements from the verification survey and the original company survey. Some aspects of data collection using rate meters linked to GPS data loggers are discussed as are aspects for data management and analyses methods required for the large amount of data collected during these surveys. Recommendations were made for implementation of future surveys and reporting the data from those surveys in order to ensure that remediation was complete. (authors)

Western states uranium resource survey

International Nuclear Information System (INIS)

Tinney, J.F.

1977-01-01

ERDA's National Uranium Resource Evaluation (NURE) program was established to provide a comprehensive description of uranium resources in the United States. To carry out this task, ERDA has contracted with various facilities, including universities, private companies, and state agencies, to undertake projects such as airborne radiometric surveys, geological and geochemical studies, and the development of advanced geophysical technology. LLL is one of four ERDA laboratories systematically studying uranium distribution in surface water, groundwater, and lake and stream sediments. We are specifically responsible for surveying seven western states. This past year we have designed and installed facilities for delayed-neutron counting and neutron-activation analysis, completed seven orientation surveys, and analyzed several thousand field samples. Full-scale reconnaissance surveys began last fall

A SURVEY OF RETINA BASED DISEASE IDENTIFICATION USING BLOOD VESSEL SEGMENTATION

Directory of Open Access Journals (Sweden)

P Kuppusamy

2016-11-01

Full Text Available The colour retinal photography is one of the most essential features to identify the confirmation of various eye diseases. The iris is primary attribute to authenticate the human. This research work presents the survey and comparison of various blood vessel related feature identification, segmentation, extraction and enhancement methods. Additionally, this study is observed the various databases performance for storing the images and testing in minimal time. This paper is also provides the better performance techniques based on the survey.

75 FR 71417 - 2010 Company Organization Survey

Science.gov (United States)

2010-11-23

... Organization Survey AGENCY: Bureau of the Census, Commerce. ACTION: Notice of determination. SUMMARY: The Bureau of the Census (Census Bureau) is conducting the 2010 Company Organization Survey. The survey's... organizations included in the survey, and additional copies are available on written request to the Director, U...

76 FR 62759 - 2011 Company Organization Survey

Science.gov (United States)

2011-10-11

... Organization Survey AGENCY: Bureau of the Census, Commerce. ACTION: Notice of determination. SUMMARY: The Bureau of the Census (Census Bureau) is conducting the 2011 Company Organization Survey. The survey's... organizations included in the survey, and additional copies are available by written request to the Director, U...

Using electronic surveys in nursing research.

Science.gov (United States)

Cope, Diane G

2014-11-01

Computer and Internet use in businesses and homes in the United States has dramatically increased since the early 1980s. In 2011, 76% of households reported having a computer, compared with only 8% in 1984 (File, 2013). A similar increase in Internet use has also been seen, with 72% of households reporting access of the Internet in 2011 compared with 18% in 1997 (File, 2013). This emerging trend in technology has prompted use of electronic surveys in the research community as an alternative to previous telephone and postal surveys. Electronic surveys can offer an efficient, cost-effective method for data collection; however, challenges exist. An awareness of the issues and strategies to optimize data collection using web-based surveys is critical when designing research studies. This column will discuss the different types and advantages and disadvantages of using electronic surveys in nursing research, as well as methods to optimize the quality and quantity of survey responses.

Survey team on

DEFF Research Database (Denmark)

Niss, Mogens Allan; Bruder, Regina; Planas, Núria

2016-01-01

This paper presents the outcomes of the work of the ICME 13 Survey Team on ‘Conceptualisation and the role of competencies, knowing and knowledge in mathematics education research’. It surveys a variety of historical and contemporary views and conceptualisations of what it means to master...... mathematics, focusing on notions such as mathematical competence and competencies, mathematical proficiency, and mathematical practices, amongst others. The paper provides theoretical analyses of these notions—under the generic heading of mathematical competencies—and gives an overview of selected research...

THE PRISM MULTI-OBJECT SURVEY (PRIMUS). II. DATA REDUCTION AND REDSHIFT FITTING

Energy Technology Data Exchange (ETDEWEB)

Cool, Richard J. [MMT Observatory, Tucson, AZ 85721 (United States); Moustakas, John [Department of Physics, Siena College, 515 Loudon Rd., Loudonville, NY 12211 (United States); Blanton, Michael R.; Hogg, David W. [Center for Cosmology and Particle Physics, Department of Physics, New York University, 4 Washington Place, New York, NY 10003 (United States); Burles, Scott M. [D.E. Shaw and Co. L.P, 20400 Stevens Creek Blvd., Suite 850, Cupertino, CA 95014 (United States); Coil, Alison L.; Aird, James; Mendez, Alexander J. [Department of Physics, Center for Astrophysics and Space Sciences, University of California, 9500 Gilman Dr., La Jolla, San Diego, CA 92093 (United States); Eisenstein, Daniel J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St, MS 20, Cambridge, MA 02138 (United States); Wong, Kenneth C. [Steward Observatory, The University of Arizona, 933 N. Cherry Ave., Tucson, AZ 85721 (United States); Zhu, Guangtun [Center for Astrophysical Sciences, Department of Physics and Astronomy, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218 (United States); Bernstein, Rebecca A. [Department of Astronomy and Astrophysics, UCA/Lick Observatory, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Bolton, Adam S. [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States)

2013-04-20

The PRIsm MUlti-object Survey (PRIMUS) is a spectroscopic galaxy redshift survey to z {approx} 1 completed with a low-dispersion prism and slitmasks allowing for simultaneous observations of {approx}2500 objects over 0.18 deg{sup 2}. The final PRIMUS catalog includes {approx}130,000 robust redshifts over 9.1 deg{sup 2}. In this paper, we summarize the PRIMUS observational strategy and present the data reduction details used to measure redshifts, redshift precision, and survey completeness. The survey motivation, observational techniques, fields, target selection, slitmask design, and observations are presented in Coil et al. Comparisons to existing higher-resolution spectroscopic measurements show a typical precision of {sigma}{sub z}/(1 + z) = 0.005. PRIMUS, both in area and number of redshifts, is the largest faint galaxy redshift survey completed to date and is allowing for precise measurements of the relationship between active galactic nuclei and their hosts, the effects of environment on galaxy evolution, and the build up of galactic systems over the latter half of cosmic history.

7 CFR 611.11 - Soil survey information.

Science.gov (United States)

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Soil survey information. 611.11 Section 611.11 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS SOIL SURVEYS Soil Survey Operations § 611.11 Soil survey information. (a) Availability. NRCS...

Collecting marine litter during regular fish surveys

NARCIS (Netherlands)

Sluis, van der M.T.; Hal, van R.

2014-01-01

This report presents the results of the marine litter monitoring on the IBTS survey of 2014 and the BTS survey of 2013. Since 2013 marine litter is collected during the International Bottom Trawl Survey (IBTS) and Dutch Beam Trawl Survey (BTS) following a protocol developed by ICES. The composition

A survey of current practices in management of Hirschsprung′s disease in Nigeria

Directory of Open Access Journals (Sweden)

Abdulrasheed A. Nasir

2014-01-01

Full Text Available Background: Although there are several modalities of treatment for Hirschsprung′s disease (HD, there are presently no clear guidelines on treatment of the condition by paediatric surgeons in Nigeria. This survey determines the current approach to treatment among Nigerian paediatric surgeons and should help in establishing a consensus and guidelines for care in this and similar setting. Materials and Methods: An online questionnaire was designed using survey Monkey ® to determine current clinical and operative management of patients with HD by consultant paediatric surgeons practicing in the Nigeria. The paediatric surgeons were notified by E-mail, which included a link to the survey on survey Monkey ® . The survey was also administered at the 12 th annual meeting of Association of Paediatric Surgeons of Nigeria in September, 2013, to capture those who did not complete the online survey. Thirty-one paediatric surgeons from 21 different tertiary paediatric surgery centres completed the survey. Results: Sixteen (52% respondents see up to 20% of their patients with HD in the neonatal period. Twenty-six (84% respondents do routine barium enema. Twenty six (84% respondents do full thickness rectal biopsy under general anaesthesia (GA. There was no consistency in operative techniques, with transabominal Swenson′s operation being practiced by 17 (57% respondents and 11 (37% transanal endorectal pull through. 14 (45% do pull through at any age. 12 (39% respondents do more than half of their patient as primary pull through. Conclusion: Full thickness rectal biopsy under GA is still the vogue with variations in the surgical technique for management of Hirshsprung′s disease in Nigeria. Primary pull through procedures is becoming increasingly popular. There′s a need for Paediatric Surgeons in Nigeria to come up with a guideline on management of HD, to guide trainees and other surgeons in the care of these patients.

Geodetic Survey Water Level Observations

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Over one million images of National Coast & Geodetic Survey (now NOAA's National Geodetic Survey/NGS) forms captured from microfiche. Tabular forms and charts...

Cosmology with cluster surveys

Indian Academy of Sciences (India)

Abstract. Surveys of clusters of galaxies provide us with a powerful probe of the den- sity and nature of the dark energy. The red-shift distribution of detected clusters is highly sensitive to the dark energy equation of state parameter w. Upcoming Sunyaev–. Zel'dovich (SZ) surveys would provide us large yields of clusters to ...

Big Surveys, Big Data Centres

Science.gov (United States)

Schade, D.

2016-06-01

Well-designed astronomical surveys are powerful and have consistently been keystones of scientific progress. The Byurakan Surveys using a Schmidt telescope with an objective prism produced a list of about 3000 UV-excess Markarian galaxies but these objects have stimulated an enormous amount of further study and appear in over 16,000 publications. The CFHT Legacy Surveys used a wide-field imager to cover thousands of square degrees and those surveys are mentioned in over 1100 publications since 2002. Both ground and space-based astronomy have been increasing their investments in survey work. Survey instrumentation strives toward fair samples and large sky coverage and therefore strives to produce massive datasets. Thus we are faced with the "big data" problem in astronomy. Survey datasets require specialized approaches to data management. Big data places additional challenging requirements for data management. If the term "big data" is defined as data collections that are too large to move then there are profound implications for the infrastructure that supports big data science. The current model of data centres is obsolete. In the era of big data the central problem is how to create architectures that effectively manage the relationship between data collections, networks, processing capabilities, and software, given the science requirements of the projects that need to be executed. A stand alone data silo cannot support big data science. I'll describe the current efforts of the Canadian community to deal with this situation and our successes and failures. I'll talk about how we are planning in the next decade to try to create a workable and adaptable solution to support big data science.

ESR teleradiology survey: results.

Science.gov (United States)

2016-08-01

With recent developments of teleradiology technology and services, it has become necessary to better evaluate its extent and use among different countries in Europe. With this goal in mind, the ESR launched two specific surveys intended to gather the current state of adoption and implementation of teleradiology in clinical practice. A special focus on differentiating between insourcing teleradiology services among partners of the same organisation and outsourcing to external services was an essential part of the design of these surveys. The first survey was addressed to 44 national societies of different countries in Europe, while the second survey was intended for all practicing radiologist ESR members. While the results of these surveys reported here may provide a wealth of information to better understand the trends in adoption of teleradiology in Europe, they only represent a snapshot at a certain point in time. The rapid development of telecommunication tools as well as a fundamental change in practice and healthcare economics will certainly influence these observations in the upcoming years. These data, however, will provide objective and relevant parameters for supporting the efforts of experts and policy makers in promoting appropriate criteria and guidelines for adequate use of teleradiology in clinical practice. Main Messages • Understand concepts and challenges of teleradiology • Provide insight into current trends and solutions for teleradiology • Compare differences in teleradiolgy strategies between countries in Europe • Establish a reference on statistical data of usage of teleradiology in Europe.

75 FR 76630 - Direct Investment Surveys: BE-577, Quarterly Survey of U.S. Direct Investment Abroad-Direct...

Science.gov (United States)

2010-12-09

....S. Direct Investment Abroad--Direct Transactions of U.S. Reporter With Foreign Affiliate.'' The..., Quarterly Survey of U.S. Direct Investment Abroad--Direct Transactions of U.S. Reporter With Foreign...] RIN 0691--AA75 Direct Investment Surveys: BE-577, Quarterly Survey of U.S. Direct Investment Abroad...

All-weather calibration of wide-field optical and NIR surveys

Energy Technology Data Exchange (ETDEWEB)

Burke, David L. [SLAC National Accelerator Laboratory, Menlo Park, CA 94025 (United States); Saha, Abhijit; Claver, Jenna; Claver, Chuck [National Optical Astronomy Observatory, Tucson, AZ 85718 (United States); Axelrod, T. [Steward Observatory, University of Arizona, Tucson, AZ 85718 (United States); DePoy, Darren [Texas A and M University, College Station, TX 77843 (United States); Ivezić, Željko; Jones, Lynne [Department of Astronomy, University of Washington, Seattle, WA 98195 (United States); Smith, R. Chris [Cerro Tololo Inter-American Observatory, Casilla 603, La Serena (Chile); Stubbs, Christopher W., E-mail: daveb@slac.stanford.edu [Harvard Smithsonian Center for Astrophysics, Harvard University, Cambridge, MA 02138 (United States)

2014-01-01

The science goals for ground-based large-area surveys, such as the Dark Energy Survey, Pan-STARRS, and the Large Synoptic Survey Telescope, require calibration of broadband photometry that is stable in time and uniform over the sky to precisions of a percent or better. This performance will need to be achieved with data taken over the course of many years, and often in less than ideal conditions. This paper describes a strategy to achieve precise internal calibration of imaging survey data taken in less than 'photometric' conditions, and reports results of an observational study of the techniques needed to implement this strategy. We find that images of celestial fields used in this case study with stellar densities ∼1 arcmin{sup –2} and taken through cloudless skies can be calibrated with relative precision ∼0.5% (reproducibility). We report measurements of spatial structure functions of cloud absorption observed over a range of atmospheric conditions, and find it possible to achieve photometric measurements that are reproducible to 1% in images that were taken through cloud layers that transmit as little as 25% of the incident optical flux (1.5 magnitudes of extinction). We find, however, that photometric precision below 1% is impeded by the thinnest detectable cloud layers. We comment on implications of these results for the observing strategies of future surveys.

A Survey of Model-based Sensor Data Acquisition and Management

OpenAIRE

Aggarwal, Charu C.; Sathe, Saket; Papaioannou, Thanasis; Jeung, Hoyoung; Aberer, Karl

2013-01-01

In recent years, due to the proliferation of sensor networks, there has been a genuine need of researching techniques for sensor data acquisition and management. To this end, a large number of techniques have emerged that advocate model-based sensor data acquisition and management. These techniques use mathematical models for performing various, day-to-day tasks involved in managing sensor data. In this chapter, we survey the state-of-the-art techniques for model-based sensor data acquisition...

The VANDELS ESO public spectroscopic survey

Science.gov (United States)

McLure, R. J.; Pentericci, L.; Cimatti, A.; Dunlop, J. S.; Elbaz, D.; Fontana, A.; Nandra, K.; Amorin, R.; Bolzonella, M.; Bongiorno, A.; Carnall, A. C.; Castellano, M.; Cirasuolo, M.; Cucciati, O.; Cullen, F.; De Barros, S.; Finkelstein, S. L.; Fontanot, F.; Franzetti, P.; Fumana, M.; Gargiulo, A.; Garilli, B.; Guaita, L.; Hartley, W. G.; Iovino, A.; Jarvis, M. J.; Juneau, S.; Karman, W.; Maccagni, D.; Marchi, F.; Mármol-Queraltó, E.; Pompei, E.; Pozzetti, L.; Scodeggio, M.; Sommariva, V.; Talia, M.; Almaini, O.; Balestra, I.; Bardelli, S.; Bell, E. F.; Bourne, N.; Bowler, R. A. A.; Brusa, M.; Buitrago, F.; Caputi, K. I.; Cassata, P.; Charlot, S.; Citro, A.; Cresci, G.; Cristiani, S.; Curtis-Lake, E.; Dickinson, M.; Fazio, G. G.; Ferguson, H. C.; Fiore, F.; Franco, M.; Fynbo, J. P. U.; Galametz, A.; Georgakakis, A.; Giavalisco, M.; Grazian, A.; Hathi, N. P.; Jung, I.; Kim, S.; Koekemoer, A. M.; Khusanova, Y.; Fèvre, O. Le; Lotz, J. M.; Mannucci, F.; Maltby, D. T.; Matsuoka, K.; McLeod, D. J.; Mendez-Hernandez, H.; Mendez-Abreu, J.; Mignoli, M.; Moresco, M.; Mortlock, A.; Nonino, M.; Pannella, M.; Papovich, C.; Popesso, P.; Rosario, D. P.; Salvato, M.; Santini, P.; Schaerer, D.; Schreiber, C.; Stark, D. P.; Tasca, L. A. M.; Thomas, R.; Treu, T.; Vanzella, E.; Wild, V.; Williams, C. C.; Zamorani, G.; Zucca, E.

2018-05-01

VANDELS is a uniquely-deep spectroscopic survey of high-redshift galaxies with the VIMOS spectrograph on ESO's Very Large Telescope (VLT). The survey has obtained ultra-deep optical (0.48 studies. Using integration times calculated to produce an approximately constant signal-to-noise ratio (20 motivation, survey design and target selection.

Survey commission of the Manche center

International Nuclear Information System (INIS)

2002-01-01

The subjects discussed during the Survey commission of the storage center of the Manche CSCM, held in october 2001, are presented in this document. They deal with the site survey, the maintenance facilities realized on this installations, the tritium survey in the water and the CSCM operating. (A.L.B.)

SURVEY, MILLE LACS COUNTY, MN

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, MAGOFFIN COUNTY, KY, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, JEFFERSON DAVIS COUNTY, MS

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

FIELD SURVEY, Androscoggin, MAINE USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, HAMILTON COUNTY, FL, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, LA PAZ COUNTY, ARIZONA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, PIKE COUNTY, KY, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, LOS ANGELES COUNTY, CALIFORNIA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, WASHINGTON COUNTY, FL, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, GADSDEN COUNTY, FL, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, St Lucie County, FL

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, SILVER BOW COUNTY, MT

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, KNOX COUNTY, TN, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

FIELD SURVEY, SUSQUEHANNA COUNTY, PENNSYLVANIA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

SURVEY, LEVY COUNTY, FL, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

Ethical Considerations for Data Collection Using Surveys.

Science.gov (United States)

Hammer, Marilyn J

2017-03-01

Surveys are widely used instruments to collect research data. Although surveys may appear relatively benign and easily unlinked to participants, considerations for the ethical conduct of research with surveys are important. Maintaining scientific rigor is essential. This article explores ethical tenets in relation to informed consent and scientific consent when using surveys.

618-11 Burial Ground USRADS radiological surveys

International Nuclear Information System (INIS)

Wendling, M.A.

1994-01-01

This report summarizes and documents the results of the radiological surveys conducted from February 4 through February 10, 1993 over the 618-11 Burial Ground, Hanford Site, Richland, Washington. In addition, this report explains the survey methodology using the Ultrasonic Ranging and Data System (USRADS). The 618-11 Burial Ground radiological survey field task consisted of two activities: characterization of the specific background conditions and the radiological survey of the area. The radiological survey of the 618-11 Burial Ground, along with the background study, were conducted by Site Investigative Surveys Environmental Restoration Health Physics Organization of the Westinghouse Hanford Company. The survey methodology was based on utilization of the Ultrasonic Ranging and Data System (USRADS) for automated recording of the gross gamma radiation levels at or near six (6) inches and at three (3) feet from the surface soil

CDS User survey

CERN Multimedia

CERN Document Service

2011-01-01

  The CERN Document Server is launching a user survey in order to collect information relative to its search engine, submission interfaces, collaborative features and content organisation. With the view of re-shaping its collections and interfaces and to better integrate with the new INSPIRE platform that serves all HEP literature, CERN Document Server team invites you to take part in the survey. Your input is essential to provide us with useful information before setting up the new service and improve your interactions with CDS. Thanks for participating !  

NEFSC Survey Indices of Abundance

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Northeast Fisheries Survey Bottom trawl survey indices of abundance such as stratified mean number per tow or mean weight per tow by species stock. Includes indices...

Dynamic Question Ordering in Online Surveys

Directory of Open Access Journals (Sweden)

Early Kirstin

2017-09-01

Full Text Available Online surveys have the potential to support adaptive questions, where later questions depend on earlier responses. Past work has taken a rule-based approach, uniformly across all respondents. We envision a richer interpretation of adaptive questions, which we call Dynamic Question Ordering (DQO, where question order is personalized. Such an approach could increase engagement, and therefore response rate, as well as imputation quality. We present a DQO framework to improve survey completion and imputation. In the general survey-taking setting, we want to maximize survey completion, and so we focus on ordering questions to engage the respondent and collect hopefully all information, or at least the information that most characterizes the respondent, for accurate imputations. In another scenario, our goal is to provide a personalized prediction. Since it is possible to give reasonable predictions with only a subset of questions, we are not concerned with motivating users to answer all questions. Instead, we want to order questions to get information that reduces prediction uncertainty, while not being too burdensome. We illustrate this framework with two case studies, for the prediction and survey-taking settings. We also discuss DQO for national surveys and consider connections between our statistics-based question-ordering approach and cognitive survey methodology.

Discovering Interacting Binaries with Halpha Surveys

NARCIS (Netherlands)

Witham, A.; Knigge, C.; Drew, J.; Groot, P.J.; Greimel, R.; Parker, Q.

2005-01-01

A deep (R ~ 19.5) photographic Halpha Survey of the southern Galactic Plane was recently completed using the UK Schmidt Telescope at the AAO. In addition, we have recently started a similar, CCD-based survey of the northern Galactic Plane using the Wide Field Camera on the INT. Both surveys aim to

Environmentally Sensitive Areas Surveys Program threatened and endangered species survey: Progress report. Environmental Restoration Program

Energy Technology Data Exchange (ETDEWEB)

King, A.L.; Awl, D.J.; Gabrielsen, C.A.

1994-09-01

The Endangered Species Act (originally passed in 1973) is a Federal statute that protects both animal and plant species. The Endangered Species Act identifies species which are, without careful management, in danger of becoming extinct and species that are considered threatened. Along with the designation of threatened or endangered, the Endangered Species Act provides for the identification of appropriate habitat for these species. Since 1993, the United States Department of Energy`s (DOE) Environmental Restoration (ER) Program has supported a program to survey the Oak Ridge Reservation (ORR) for threatened and endangered species. The Environmentally Sensitive Areas Surveys Program initiated vascular plant surveys during fiscal year 1993 and vertebrate animal surveys during fiscal year 1994 to determine the baseline condition of threatened and endangered species on the ORR at the present time. Data collected during these surveys are currently aiding Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Remedial Investigations on the ORR. They also provide data for ER and Waste Management decision documents, ensure that decisions have technical and legal defensibility, provide a baseline for ensuring compliance with principal legal requirements and will increase public confidence in DOE`s adherence to all related environmental resources rules, laws, regulations, and instructions. This report discusses the progress to date of the threatened and endangered species surveys of the ORR.

Principles of survey development for telemedicine applications.

Science.gov (United States)

Demiris, George

2006-01-01

Surveys can be used in the evaluation of telemedicine applications but they must be properly designed, consistent and accurate. The purpose of the survey and the resources available will determine the extent of testing that a survey instrument should undergo prior to its use. The validity of an instrument is the correspondence between what is being measured and what was intended to be measured. The reliability of an instrument describes the 'consistency' or 'repeatability' of the measurements made with it. Survey instruments should be designed and tested following basic principles of survey development. The actual survey administration also requires consideration, for example data collection and processing, as well as the interpretation of the findings. Surveys are of two different types. Either they are self-administered, or they are administered by interview. In the latter case, they may be administered by telephone or in a face-to-face meeting. It is important to design a survey instrument based on a detailed definition of what it intends to measure and to test it before administering it to the larger sample.

Teachers of the Alexander Technique in the UK and the people who take their lessons: A national cross-sectional survey.

Science.gov (United States)

Eldred, J; Hopton, A; Donnison, E; Woodman, J; MacPherson, H

2015-06-01

Given the rising profile of the Alexander Technique in the UK, there is a need for a comprehensive description of its teachers and of those who currently take lessons. In a national survey of Alexander teachers, we set out to address this information gap. A cross-sectional survey of 871 UK members of three main Alexander Technique teachers' professional associations was conducted. A questionnaire requested information about their professional background, teaching practice and methods, and about the people who attend lessons and their reasons for seeking help. With an overall response rate of 61%, 534 teachers responded; 74% were female with median age of 58 years, 60% had a higher education qualification, and 95% were self-employed, many with additional non-Alexander paid employment. The majority (87%) offered lessons on their own premises or in a privately rented room, and 19% provided home visits; both individual and group lessons were provided. People who took lessons were predominantly female (66%) with a median age of 48 years, and 91% paid for their lessons privately. Nearly two-thirds (62%) began lessons for reasons related to musculoskeletal conditions, including back symptoms, posture, neck pain, and shoulder pain. Other reasons were general (18%, including well-being), performance-related (10%, including voice-, music-, and sport-related), psychological (5%) and neurological (3%). We estimate that Alexander teachers in the UK provide approximately 400,000 lessons per year. This study provides an overview of Alexander Technique teaching in the UK today and data that may be useful when planning future research. Copyright © 2015 Elsevier Ltd. All rights reserved.

Nearshore Survey System Evaluation

Science.gov (United States)

2017-12-01

environmental challenges. ERDC develops innovative solutions in civil and military engineering , geospatial sciences, water resources, and environmental...CRAB: A Unique Nearshore Surveying Vehicle.” American Society of Civil Engineers , Journal of Surveying Engineering 110(1): 1–7. Clausner, J. E., W...unlimited. The U.S. Army Engineer Research and Development Center (ERDC) solves the nation’s toughest engineering and

Marine gamma spectrometric survey

International Nuclear Information System (INIS)

Kostoglodov, V.V.

1979-01-01

Presented are theoretical problems physical and geochemical prerequisites and possibilities of practical application of the method of continuous submarine gamma-spectrometric survey and radiometric survey destined for rapid study of the surface layer of marine sediments. Shown is high efficiency and advantages of this method in comparison with traditional and widely spread in marine geology methods of bottom sediments investigation

A Survey on Optimal Signal Processing Techniques Applied to Improve the Performance of Mechanical Sensors in Automotive Applications

Directory of Open Access Journals (Sweden)

Wilmar Hernandez

2007-01-01

Full Text Available In this paper a survey on recent applications of optimal signal processing techniques to improve the performance of mechanical sensors is made. Here, a comparison between classical filters and optimal filters for automotive sensors is made, and the current state of the art of the application of robust and optimal control and signal processing techniques to the design of the intelligent (or smart sensors that today’s cars need is presented through several experimental results that show that the fusion of intelligent sensors and optimal signal processing techniques is the clear way to go. However, the switch between the traditional methods of designing automotive sensors and the new ones cannot be done overnight because there are some open research issues that have to be solved. This paper draws attention to one of the open research issues and tries to arouse researcher’s interest in the fusion of intelligent sensors and optimal signal processing techniques.

Methods of practice and guidelines for using survey-grade global navigation satellite systems (GNSS) to establish vertical datum in the United States Geological Survey

Science.gov (United States)

Rydlund, Jr., Paul H.; Densmore, Brenda K.

2012-01-01

flexibility regarding efficiency and quality of data collection. Quality assurance of survey-grade global positioning is often overlooked or not understood and perceived uncertainties can be misleading. GNSS users can benefit from a blueprint of data collection standards used to ensure consistency among USGS mission areas. A classification of GNSS survey qualities provide the user with the ability to choose from the highest quality survey used to establish objective points with low uncertainties, identified as a Level I, to a GNSS survey for general topographic control without quality assurance, identified as a Level IV. A Level I survey is strictly limited to post-processed methods, whereas Level II, Level III, and Level IV surveys integrate variations of a RT approach. Among these classifications, techniques involving blunder checks and redundancy are important, and planning that involves the assessment of the overall satellite configuration, as well as terrestrial and space weather, are necessary to ensure an efficient and quality campaign. Although quality indicators and uncertainties are identified in post-processed methods using CORS, the accuracy of a GNSS survey is most effectively expressed as a comparison to a local benchmark that has a high degree of confidence. Real-time and post-processed methods should incorporate these "trusted" benchmarks as a check during any campaign. Global positioning surveys are expected to change rapidly in the future. The expansion of continuously operating reference stations, combined with newly available satellite signals, and enhancements to the conterminous geoid, are all sufficient indicators for substantial growth in real-time positioning and quality thereof.

Comparison of Survey Data Collection Methods

Directory of Open Access Journals (Sweden)

VIDAL DÍAZ DE RADA

2017-01-01

Full Text Available This paper presents the results of a mixed-mode survey of the general population using a combination of postal, telephone, and Internet survey protocols. Potential respondents were invited to participate by ordinary mail and were allowed to choose their preferred response mode. The paper focuses on response quality (taking non-responses into consideration, fieldwork time and data collection cost. The results reveal that the Internet survey produces the lowest rate of non-responses and requires significantly less fieldwork time, although it is slightly more costly than the postal survey. However, when differences in cost structure are taken into account, we find that the same number of completed questionnaires could have been obtained through the Internet alone at a cost that is 18.2% lower than the mixed-mode survey.

The all-sky 408 MHz survey

International Nuclear Information System (INIS)

Haslam, C.G.T.; Salter, C.J.; Stoffel, H.

1981-01-01

A brief outline of the results of this survey is presented. The 408 MHz All-sky Survey has been made from four radio continuum surveys observed between 1965 and 1978, using the Jodrell Bank MKI telescope (Haslam et al., 1970), the Effelsberg 100 metre telescope (Haslam et al., 1974) and the Parkes 64 metre telescope (Haslam et al., 1975). A detailed description of the survey data reduction and calibration methods, with preliminary astronomical results will soon be published (Haslam et al., 1980a) and a second paper will give an atlas of maps at the full survey resolution of 51' arc between half power points (Haslam et al., 1980b). A map, smoothed to a gaussian beam with resolution between half power poitns of 3 0 , is presented. (Auth.)

Potential Theory Surveys and Problems

CERN Document Server

Lukeš, Jaroslav; Netuka, Ivan; Veselý, Jiří

1988-01-01

The volume comprises eleven survey papers based on survey lectures delivered at the Conference in Prague in July 1987, which covered various facets of potential theory, including its applications in other areas. The survey papers deal with both classical and abstract potential theory and its relations to partial differential equations, stochastic processes and other branches such as numerical analysis and topology. A collection of problems from potential theory, compiled on the occasion of the conference, is included, with additional commentaries, in the second part of this volume.

Spectrometric aerial survey as a new tool for geological survey and mining prospecting

International Nuclear Information System (INIS)

Cambon, R.

1997-01-01

Airborne survey for radioactive minerals started around 1945. The limited sensitivity of the tools used, the difficulties found for the topographic and training effect corrections, made difficult the evaluation of the results. The technical progresses realized in the recent past years in electronic and computer sciences allowed to overcome these difficulties and gave to the method all its potentialities. With the aerial spectrometric survey, a new step was made, because this method can be used for other topics than radioactive prospection such as geological survey and mining prospection for metallic and industrial minerals. The spectrometric method is based on the possibility to measure photopeak energies (gamma radiation) emitted by radioactive minerals and discriminate between them those emitted by U238, TI 208 and K40 respectively daughter products of uranium, thorium and potassium. For airborne survey, one consider that measuring instruments will allow to pick-up 80% of the radioactive emission concerning the first 15 to 30 centimetres of ground (1 metre maximum). The use of this method for geological and mineral exploration is based on the assumption that different rock types or ore bearing rock types are composed of certain amounts of rock forming minerals which comprise specific quantities of radioactive elements such as potassium, uranium and thorium (cf: Gabelman 77). To be able to evaluate the results of the spectrometric survey it will be necessary to know roughly the behaviour of the different radioactive elements through a complete geological cycle. (author)

Disclosure Control using Partially Synthetic Data for Large-Scale Health Surveys, with Applications to CanCORS

OpenAIRE

Loong, Bronwyn; Zaslavsky, Alan M.; He, Yulei; Harrington, David P.

2013-01-01

Statistical agencies have begun to partially synthesize public-use data for major surveys to protect the confidentiality of respondents’ identities and sensitive attributes, by replacing high disclosure risk and sensitive variables with multiple imputations. To date, there are few applications of synthetic data techniques to large-scale healthcare survey data. Here, we describe partial synthesis of survey data collected by CanCORS, a comprehensive observational study of the experiences, treat...

Methodological Issues in Survey Research: A Historical Review