WorldWideScience

Sample records for survey questions designed

  1. Dynamic Question Ordering in Online Surveys

    Directory of Open Access Journals (Sweden)

    Early Kirstin

    2017-09-01

    Full Text Available Online surveys have the potential to support adaptive questions, where later questions depend on earlier responses. Past work has taken a rule-based approach, uniformly across all respondents. We envision a richer interpretation of adaptive questions, which we call Dynamic Question Ordering (DQO, where question order is personalized. Such an approach could increase engagement, and therefore response rate, as well as imputation quality. We present a DQO framework to improve survey completion and imputation. In the general survey-taking setting, we want to maximize survey completion, and so we focus on ordering questions to engage the respondent and collect hopefully all information, or at least the information that most characterizes the respondent, for accurate imputations. In another scenario, our goal is to provide a personalized prediction. Since it is possible to give reasonable predictions with only a subset of questions, we are not concerned with motivating users to answer all questions. Instead, we want to order questions to get information that reduces prediction uncertainty, while not being too burdensome. We illustrate this framework with two case studies, for the prediction and survey-taking settings. We also discuss DQO for national surveys and consider connections between our statistics-based question-ordering approach and cognitive survey methodology.

  2. Question-answer sequences in survey interviews

    NARCIS (Netherlands)

    Dijkstra, W.; Ongena, Y.P.

    2006-01-01

    Interaction analysis was used to analyze a total of 14,265 question-answer sequences of (Q-A Sequences) 80 questions that originated from two face-to-face and three telephone surveys. The analysis was directed towards the causes and effects of particular interactional problems. Our results showed

  3. IMS Learning Design Frequently Asked Questions

    NARCIS (Netherlands)

    Tattersall, Colin; Manderveld, Jocelyn; Hummel, Hans; Sloep, Peter; Koper, Rob; De Vries, Fred

    2004-01-01

    This list of frequently asked questions was composed on the basis of questions asked of the Educational Technology Expertise Centrum. The questions addessed are: Where can I find the IMS Learning Design Specification? What is meant by the phrase “Learning Design”? What is the IMS LD Specification

  4. Supply chain design: Some critical questions

    Directory of Open Access Journals (Sweden)

    J. D. Nel

    2010-11-01

    Full Text Available Effective supply chain management (SCM requires organisations to work together in order to satisfy the needs of their end customers. Since organisations have to determine which processes and relationships will best achieve this aim, the design of their supply chains is important. Supply chain design thus forms an integral part of SCM and embodies the supply chain's structure. Unfortunately, too many organisations allow the design of their supply chain to evolve into its current form instead of planning their supply chain design (SCD efforts. The literature is vague on what SCD efforts constitute. This article consists of a comprehensive literature study in which an effort was made to bring more clarity on exactly what purposeful SCD efforts consist of, and some key questions were formulated that organisations could use as a guide in their SCD practices. From these critical questions a conceptual framework has been developed that can be used to determine whether organisations' SCD practices are aligned with organisational objectives. The conceptual framework was tested at two South African organisations to determine if it indeed can be be used to analyse the SCD practices of organisations.

  5. Comparing Traditional and Crowdsourcing Methods for Pretesting Survey Questions

    Directory of Open Access Journals (Sweden)

    Jennifer Edgar

    2016-10-01

    Full Text Available Cognitive interviewing is a common method used to evaluate survey questions. This study compares traditional cognitive interviewing methods with crowdsourcing, or “tapping into the collective intelligence of the public to complete a task.” Crowdsourcing may provide researchers with access to a diverse pool of potential participants in a very timely and cost-efficient way. Exploratory work found that crowdsourcing participants, with self-administered data collection, may be a viable alternative, or addition, to traditional pretesting methods. Using three crowdsourcing designs (TryMyUI, Amazon Mechanical Turk, and Facebook, we compared the participant characteristics, costs, and quantity and quality of data with traditional laboratory-based cognitive interviews. Results suggest that crowdsourcing and self-administered protocols may be a viable way to collect survey pretesting information, as participants were able to complete the tasks and provide useful information; however, complex tasks may require the skills of an interviewer to administer unscripted probes.

  6. Designing an Effective Survey

    National Research Council Canada - National Science Library

    Kasunic, Mark

    2005-01-01

    ... of them. However, to protect the validity of conclusions drawn from a survey, certain procedures must be followed throughout the process of designing, developing, and distributing the survey questionnaire...

  7. "I didn't write the questions!" - Negotiating telephone-survey questions on birth timing

    Directory of Open Access Journals (Sweden)

    Marian May

    2008-06-01

    Full Text Available This paper examines interviewer-respondent interaction in the collection of demographic data. Conversation analysis (CA makes transparent the interaction between an interviewer and 25 respondents on a question about pregnancy and birth timing in an Australian telephone survey, Negotiating the Life Course. The analysis focuses on the troubles that occur and the work interviewers do to fit respondents' answers to the survey researcher's categories. Interviewers are shown to act as mediators in difficult interaction, with responses often distorted by question format, the imperative of achieving an allowed response, and the need to keep the respondent in the survey.

  8. Surveying problem solution with theory and objective type questions

    CERN Document Server

    Chandra, AM

    2005-01-01

    The book provides a lucid and step-by-step treatment of the various principles and methods for solving problems in land surveying. Each chapter starts with basic concepts and definitions, then solution of typical field problems and ends with objective type questions. The book explains errors in survey measurements and their propagation. Survey measurements are detailed next. These include horizontal and vertical distance, slope, elevation, angle, and direction. Measurement using stadia tacheometry and EDM are then highlighted, followed by various types of levelling problems. Traversing is then explained, followed by a detailed discussion on adjustment of survey observations and then triangulation and trilateration.

  9. Seismic-design questions typify nuclear obstacles

    International Nuclear Information System (INIS)

    Strauss, S.D.

    1979-01-01

    The trade-off between safe design of nuclear power plants and cost is considered. As an example, seismic protection problems at the Beaver Valley station of Duquesne Light Co. and their resolution by Stone and Webster Engineering are discussed

  10. Design and the question of aesthetics

    DEFF Research Database (Denmark)

    Friberg, Carsten

    2014-01-01

    In the article an approach to aesthetics is suggested with the focus on the education of the designer rather than on the outcome of the design. Design is taken to be an interpretative intervention into a social context which requires a sensibility for the context. The forming of this sensibility...... in the social context a central issue of aesthetics. Here, is the argument, is the link to an aesthetic education understood as an education of our senses through cultural products which is also a link to a perspective that appears to be absent in present debates on aesthetics in relation to design. Taking up...... is the goal of an aesthetic education. Through discussions of different approaches to aesthetics like Grant Kester’s dialogical aesthetics and Kant’s critique of the faculty of judgement, it is emphasized how sensibility as the key focus of aesthetics rather than art and beauty makes the ability to manoeuvre...

  11. Measuring Workplace Travel Behaviour: Validity and Reliability of Survey Questions

    Directory of Open Access Journals (Sweden)

    Nicholas A. Petrunoff

    2013-01-01

    Full Text Available Background. The purpose of this study was to assess the (previously untested reliability and validity of survey questions commonly used to assess travel mode and travel time. Methods. Sixty-five respondents from a staff survey of travel behaviour conducted in a south-western Sydney hospital agreed to complete a travel diary for a week, wear an accelerometer over the same period, and twice complete an online travel survey an average of 21 days apart. The agreement in travel modes between the self-reported online survey and travel diary was examined with the kappa statistic. Spearman’s correlation coefficient was used to examine agreement of travel time from home to workplace measured between the self-reported online survey and four-day travel diary. Moderate-to-vigorous physical activity (MVPA time of active and nonactive travellers was compared by t-test. Results. There was substantial agreement between travel modes (K=0.62, P<0.0001 and a moderate correlation for travel time (ρ=0.75, P<0.0001 reported in the travel diary and online survey. There was a high level of agreement for travel mode (K=0.82, P<0.0001 and travel time (ρ=0.83, P<0.0001 between the two travel surveys. Accelerometer data indicated that for active travellers, 16% of the journey-to-work time is MVPA, compared with 6% for car drivers. Active travellers were significantly more active across the whole workday. Conclusions. The survey question “How did you travel to work this week? If you used more than one transport mode specify the one you used for the longest (distance portion of your journey” is reliable over 21 days and agrees well with a travel diary.

  12. Cables - a question of custom-design

    International Nuclear Information System (INIS)

    Doig, Tom

    1994-01-01

    Electrical equipment such as cabling can often be the limiting factor as far as machine operations in radioactive environments are concerned. Electronic and electrical equipment will degrade if exposed to ionising radiation, affecting equipment reliability, or causing complete failure. However, several companies provide custom-designed products directed specifically at the nuclear industry. One such company is Habia Cable which has built up its business in submarine cables, internal engine cables, and cables for high fire risk situations. It began supplying custom-designed cables to the nuclear industry in 1986, and has since then supplied cables throughout Europe from its plant in Sweden. (Author)

  13. Some Big Questions about Design in Educational Technology

    Science.gov (United States)

    Gibbons, Andrew S.

    2016-01-01

    This article asks five questions that lead us to the foundations of design practice in educational technology. Design processes structure time, space, place, activity, role, goal, and resource. For educational technology to advance in its understanding of design practice, it must question whether we have clear conceptions of how abstract…

  14. Attitudes towards assisted dying are influenced by question wording and order: a survey experiment.

    Science.gov (United States)

    Magelssen, Morten; Supphellen, Magne; Nortvedt, Per; Materstvedt, Lars Johan

    2016-04-27

    Surveys on attitudes towards assisted dying play an important role in informing public debate, policy and legislation. Unfortunately, surveys are often designed with insufficient attention to framing effects; that is, effects on the respondents' stated attitudes caused by question wording and context. The purpose of this study was to demonstrate and measure such framing effects. Survey experiment in which an eight-question survey on attitudes towards assisted dying was distributed to Norwegian citizens through a web-based panel. Two variations of question wording as well as two variations of question order were employed. Respondents were randomized to receive one of four questionnaire versions. Three thousand and fifty responses were received. There were moderate to large question wording and question order effects. A majority of Norwegian citizens favour the legalization of assisted dying for patients with terminal or chronic disease. Stakeholders in the assisted dying debate need to acknowledge potential framing effects, and accordingly should interpret survey results with caution. The same holds for researchers who conduct attitude surveys in the field of bioethics.

  15. Issues in environmental survey design

    International Nuclear Information System (INIS)

    Iachan, R.

    1989-01-01

    Several environmental survey design issues are discussed and illustrated with surveys designed by Research Triangle Institute statisticians. Issues related to sampling and nonsampling errors are illustrated for indoor air quality surveys, radon surveys, pesticide surveys, and occupational and personal exposure surveys. Sample design issues include the use of auxiliary information (e.g. for stratification), and sampling in time. We also discuss the reduction and estimation of nonsampling errors, including nonresponse and measurement bias

  16. Survey process quality: a question of healthcare manager approach.

    Science.gov (United States)

    Nilsson, Petra; Blomqvist, Kerstin

    2017-08-14

    Purpose The purpose of this paper is to explore how healthcare first-line managers think about and act regarding workplace survey processes. Design/methodology/approach This interview study was performed at a hospital in south Sweden. First-line healthcare managers ( n=24) volunteered. The analysis was inspired by phenomenography, which aims to describe the ways in which different people experience a phenomenon. The phenomenon was a workplace health promotion (WHP) survey processes. Findings Four main WHP survey process approaches were identified among the managers: as a possibility, as a competition, as a work task among others and as an imposition. For each, three common subcategories emerged; how managers: stated challenges and support from hospital management; described their own work group and collaboration with other managers; and expressed themselves and their situation in their roles as first-line managers. Practical implications Insights into how hospital management can understand their first-line managers' motivation for survey processes and practical suggestions and how managers can work proactively at organizational, group and individual level are presented. Originality/value Usually these studies focus on those who should respond to a survey; not those who should run the survey process. Focusing on managers and not co-workers can lead to more committed and empowered managers and thereby success in survey processes.

  17. Designing effective questions for classroom response system teaching

    Science.gov (United States)

    Beatty, Ian D.; Gerace, William J.; Leonard, William J.; Dufresne, Robert J.

    2006-01-01

    Classroom response systems can be powerful tools for teaching physics. Their efficacy depends strongly on the quality of the questions. Creating effective questions is difficult and differs from creating exam and homework problems. Each classroom response system question should have an explicit pedagogic purpose consisting of a content goal, a process goal, and a metacognitive goal. Questions can be designed to fulfill their purpose through four complementary mechanisms: directing students' attention, stimulating specific cognitive processes, communicating information to the instructor and students via classroom response system-tabulated answer counts, and facilitating the articulation and confrontation of ideas. We identify several tactics that are useful for designing potent questions and present four "makeovers" to show how these tactics can be used to convert traditional physics questions into more powerful questions for a classroom response system.

  18. Poisson and negative binomial item count techniques for surveys with sensitive question.

    Science.gov (United States)

    Tian, Guo-Liang; Tang, Man-Lai; Wu, Qin; Liu, Yin

    2017-04-01

    Although the item count technique is useful in surveys with sensitive questions, privacy of those respondents who possess the sensitive characteristic of interest may not be well protected due to a defect in its original design. In this article, we propose two new survey designs (namely the Poisson item count technique and negative binomial item count technique) which replace several independent Bernoulli random variables required by the original item count technique with a single Poisson or negative binomial random variable, respectively. The proposed models not only provide closed form variance estimate and confidence interval within [0, 1] for the sensitive proportion, but also simplify the survey design of the original item count technique. Most importantly, the new designs do not leak respondents' privacy. Empirical results show that the proposed techniques perform satisfactorily in the sense that it yields accurate parameter estimate and confidence interval.

  19. Ten Questions about the Future of Art and Design Education.

    Science.gov (United States)

    Steers, John

    1997-01-01

    Asks ten questions about the future of art, crafts, and design education. Focuses on why art, crafts, and design education should be included in the curriculum; how the curriculum should be defined; and how art educators should respond to conflicting calls for cultural relativism and for cultural nationalism. (DSK)

  20. Justification of Intimate Partner Violence in Rural Bangladesh: What Survey Questions Fail to Capture

    OpenAIRE

    Schuler, Sidney Ruth; Lenzi, Rachel; Yount, Kathryn M.

    2011-01-01

    This article presents qualitative findings from a project designed to develop better methodological tools for clarifying women’s and men’s attitudes about intimate partner violence (IPV) in rural Bangladesh and their perceptions of norms about IPV in their communities. Cognitive interviews and focus-group discussions were used to explore respondents’ subjective understanding of standard survey questions meant to elicit attitudes about IPV. We find that the proportion of participants who justi...

  1. Question Sets and Profiles: A Technique for Evaluating Building Design.

    Science.gov (United States)

    Scoffham, Stephen

    1982-01-01

    A questionnaire (survey sheet) has been developed focusing on some of the factors an architect has to consider in designing a house (site, appearance, suitability, and building maintenance). The use of the questionnaire by students and "spin off" activities are discussed. (Author/JN)

  2. Analysis of Quality of Proxy Questions in Health Surveys by Behavior Coding

    NARCIS (Netherlands)

    Benitez, I.; Padilla, J.L.; Ongena, Yfke

    2012-01-01

    The aim of this study is to show how to analyze the quality of questions for proxy informants by means of behavior coding. Proxy questions can undermine survey data quality because of the fact that proxies respond to questions on behalf of other people. Behavior coding can improve questions by

  3. Surveying Parental Mediation: Connections, Challenges and Questions for Media Literacy

    Science.gov (United States)

    Mendoza, Kelly

    2009-01-01

    This paper examines three strategies of parental mediation--coviewing, restrictive mediation, and active mediation--in order to make connections, challenge, and raise questions for media literacy. Coviewing, whether it is intentional practice, or whether it functions to promote media literacy, is explored. Restrictive mediation, how it connects to…

  4. Design and Validation of the Quantum Mechanics Conceptual Survey

    Science.gov (United States)

    McKagan, S. B.; Perkins, K. K.; Wieman, C. E.

    2010-01-01

    The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students' conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included…

  5. Questions raised in developing fast reactor steam generator designs

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, P A; Hayden, O

    1975-07-01

    The most important component in the achievement of satisfactory LMFBR reliability is the steam generator. When the failure statistics of other nuclear steam generators and the implications of a sodium water reaction are considered, there is some cause for concern. It is apparent that considerable improvement in technology is necessary and until more experience on operating plant is available a conservative design approach must be taken. Many solutions have been proposed, varying from forced circulation straight tube modular to large single vessel once through helical designs. The paper poses what are considered to be the main questions which arise when making a choice of fast reactor steam generator type and tube configuration. The aim is to promote discussion amongst the assembled experts on their relative design approaches and the importance placed upon the various factors in reaching our common goal of ensuring the success of the LMFBR in its essential role of conserving world energy resources. (author)

  6. Questions raised in developing fast reactor steam generator designs

    International Nuclear Information System (INIS)

    Taylor, P.A.; Hayden, O.

    1975-01-01

    The most important component in the achievement of satisfactory LMFBR reliability is the steam generator. When the failure statistics of other nuclear steam generators and the implications of a sodium water reaction are considered, there is some cause for concern. It is apparent that considerable improvement in technology is necessary and until more experience on operating plant is available a conservative design approach must be taken. Many solutions have been proposed, varying from forced circulation straight tube modular to large single vessel once through helical designs. The paper poses what are considered to be the main questions which arise when making a choice of fast reactor steam generator type and tube configuration. The aim is to promote discussion amongst the assembled experts on their relative design approaches and the importance placed upon the various factors in reaching our common goal of ensuring the success of the LMFBR in its essential role of conserving world energy resources. (author)

  7. Design and the question of contemporary aesthetic experiences

    DEFF Research Database (Denmark)

    Folkmann, Mads Nygaard; Jensen, Hans-Christian

    2017-01-01

    The article raises the question of the historical relativism of aesthetic experiences and argues that aesthetic experiences have changed according to new conditions in the contemporary age of globalization, mediatization and consumer culture. In this context, design gains attention as a primary...... case for aesthetic evaluation as design objects are, more than ever, framed and staged to be experienced aesthetically. Basing on this starting point, the article argues that an understanding of contemporary aesthetic experiences requires a meeting of cultural theory and philosophical approaches....... On the one hand, cultural theory is required to understand the changed conditions of the production, circulation and consumption of aesthetic meaning in cultural forms of art and design. On the other, philosophical aesthetics gives access to understanding the mechanisms of aesthetic judgments and how...

  8. The Impact of Question Format, Context, and Content on Survey Answers in Early and Late Adolescence

    Directory of Open Access Journals (Sweden)

    Diersch Nadine

    2016-06-01

    Full Text Available Self-reports in surveys are often influenced by the presented question format and question context. Much less is known about how these effects influence the answers of younger survey respondents. The present study investigated how variations in response format, answer scale frequency, and question order influence self-reports of two age groups: younger (11–13 years old and older (16–18 years old adolescents. In addition, the impact of the respondents’ level of familiarity with the question content was taken into account. Results indicated that younger adolescents are more strongly influenced by the presented question format and context than older adolescents. This, however, was dependent on the particular question content, implying that response effects are more pronounced when questions deal with issues that lie outside of the respondents’ field of experience. Implications of these findings in survey research with younger respondents are discussed.

  9. Framing violence: the effect of survey context and question framing on reported rates of partner violence

    OpenAIRE

    Regan, Katherine V.

    2008-01-01

    In this dissertation, I investigated two explanations for the variability in levels of partner violence found by large community surveys. In Study 1, I examined the effect of how questions about partner violence are introduced (question framing: conflict, violence-in-relationships, or attacks) on reports of partner violence. Although there was not a reliable effect of question framing, the pattern of findings was consistent across 3 of 4 analyses. Counter to predictions, an attacks question f...

  10. Positive versus Negative. A cognitive perspective on wording effects for contrastive questions in attitude surveys

    OpenAIRE

    Kamoen, N.

    2012-01-01

    Standardized surveys are used in many contexts to measure people’s opinions and attitudes. Although it is widely assumed that survey answers represent the ‘true values’ of the concepts measured, a large body of research has shown that seemingly irrelevant question characteristics influence how respondents report their attitudes. The research presented in this dissertation revolved around on one of these characteristics: whether the question is worded positively (This is an interesting book. Y...

  11. Watershed-based survey designs

    Science.gov (United States)

    Detenbeck, N.E.; Cincotta, D.; Denver, J.M.; Greenlee, S.K.; Olsen, A.R.; Pitchford, A.M.

    2005-01-01

    Watershed-based sampling design and assessment tools help serve the multiple goals for water quality monitoring required under the Clean Water Act, including assessment of regional conditions to meet Section 305(b), identification of impaired water bodies or watersheds to meet Section 303(d), and development of empirical relationships between causes or sources of impairment and biological responses. Creation of GIS databases for hydrography, hydrologically corrected digital elevation models, and hydrologic derivatives such as watershed boundaries and upstream–downstream topology of subcatchments would provide a consistent seamless nationwide framework for these designs. The elements of a watershed-based sample framework can be represented either as a continuous infinite set defined by points along a linear stream network, or as a discrete set of watershed polygons. Watershed-based designs can be developed with existing probabilistic survey methods, including the use of unequal probability weighting, stratification, and two-stage frames for sampling. Case studies for monitoring of Atlantic Coastal Plain streams, West Virginia wadeable streams, and coastal Oregon streams illustrate three different approaches for selecting sites for watershed-based survey designs.

  12. On the interpretation of World Values Survey trust question - global expectations vs. local beliefs

    DEFF Research Database (Denmark)

    Banerjee, Ritwik

    How should we interpret the World Values Survey (WVS) trust question? We conduct an experiment in India - a low trust country, to correlate the WVS trust question with trust decisions in an incentivized Trust Game. Evidence supports findings from one strand of the fractured literature - the WVS t...

  13. The International scale interval study: improving the comparability of responses to survey questions about happiness

    NARCIS (Netherlands)

    Veenhoven, R.

    2009-01-01

    This study is about survey questions on happiness using verbal response options, such as ‘very happy’ and ‘fairly happy’. The aim is to estimate what degrees of happiness are denoted by such terms in different questions and Languages. These degrees are expressed in numerical values on a 0 to 10

  14. Reincarnation Revisited: Question format and the distribution of belief in reincarnation in survey research

    OpenAIRE

    Siegers, Pascal

    2013-01-01

    Comparing frequency of belief in reincarnation from different international survey projects (RAMP, EVS, ISSP) reveals differences of about 15 to 20 percent depending on the specific question format. If single binary questions are used, then belief in reincarnation is more often reported than if a forced-choice question is used which offers respondents alternatives to belief in reincarnation (e.g. resurrection). One possible explanation for this result is that respondents confuse reincarnation...

  15. Positive versus Negative. A cognitive perspective on wording effects for contrastive questions in attitude surveys

    NARCIS (Netherlands)

    Kamoen, N.

    2012-01-01

    Standardized surveys are used in many contexts to measure people’s opinions and attitudes. Although it is widely assumed that survey answers represent the ‘true values’ of the concepts measured, a large body of research has shown that seemingly irrelevant question characteristics influence how

  16. A Review of What Instructional Designers Do: Questions Answered and Questions Not Asked

    Directory of Open Access Journals (Sweden)

    Richard Kenny

    2005-02-01

    Full Text Available The purpose of this literature review was to determine what evidence there is that instructional designers apply ID Models, as well as to establish what other activities and processes they might use in their professional activities. Only ten articles were located that directly pertained to this topic: seven reporting on empirical research and three case descriptions recounting development experiences. All ten papers pertained to process-based ID models. Results showed that, while instructional designers apparently do make use of process-based ID models, they do not spend the majority of their time working with them nor do they follow them in a rigid fashion. They also engage in a wide variety of other tasks that are not reflected in ID models.

  17. Simulation in the Service of Design - Asking the Right Questions

    Energy Technology Data Exchange (ETDEWEB)

    Donn, Michael; Selkowitz, Stephen; Bordass, Bill

    2009-03-01

    This paper proposes an approach to the creation of design tools that address the real information needs of designers in the early stages of design of nonresidential buildings. Traditional simplified design tools are typically too limited to be of much use, even in conceptual design. The proposal is to provide access to the power of detailed simulation tools, at a stage in design when little is known about the final building, but at a stage also when the freedom to explore options is greatest. The proposed approach to tool design has been derived from consultation with design analysis teams as part of the COMFEN tool development. The paper explores how tools like COMFEN have been shaped by this consultation and how requests from these teams for real-world relevance might shape such tools in the future, drawing into the simulation process the lessons from Post Occupancy Evaluation (POE) of buildings.

  18. A comprehensive survey of brain interface technology designs.

    Science.gov (United States)

    Mason, S G; Bashashati, A; Fatourechi, M; Navarro, K F; Birch, G E

    2007-02-01

    In this work we present the first comprehensive survey of Brain Interface (BI) technology designs published prior to January 2006. Detailed results from this survey, which was based on the Brain Interface Design Framework proposed by Mason and Birch, are presented and discussed to address the following research questions: (1) which BI technologies are directly comparable, (2) what technology designs exist, (3) which application areas (users, activities and environments) have been targeted in these designs, (4) which design approaches have received little or no research and are possible opportunities for new technology, and (5) how well are designs reported. The results of this work demonstrate that meta-analysis of high-level BI design attributes is possible and informative. The survey also produced a valuable, historical cross-reference where BI technology designers can identify what types of technology have been proposed and by whom.

  19. 2016 Workplace and Gender Relations Survey of Active Duty Members: Frequently Asked Questions

    Science.gov (United States)

    2017-05-01

    outstanding research that has had a clear impact on improving policy decisions practice or discourse, either in the public or private sectors .” 6. What...2017 2016 Workplace and Gender Relations Survey of Active Duty Members 433 | OPA Frequently Asked Questions 2016 Workplace and Gender Relations...OPA), has been conducting surveys of gender issues for the active duty military since 1988. RSSC uses scientific state of the art statistical

  20. A beautiful question finding nature’s deep design

    CERN Document Server

    Wilczek, Frank

    2015-01-01

    Artists as well as scientists throughout human history have pondered this “beautiful question.” With Nobel laureate Frank Wilczek as your guide, embark on a voyage of related discoveries, from Plato and Pythagoras up to the present. Wilczek’s groundbreaking work in quantum physics was inspired by his intuition to look for a deeper order of beauty in nature. In fact, every major advance in his career came from this intuition: to assume that the universe embodies beautiful forms, forms whose hallmarks are symmetry—harmony, balance, proportion—and economy. There are other meanings of “beauty,” but this is the deep logic of the universe—and it is no accident that it is also at the heart of what we find aesthetically pleasing and inspiring. Wilczek is hardly alone among great scientists in charting his course using beauty as his compass. As he reveals in A Beautiful Question, this has been the heart of scientific pursuit from Pythagoras, the ancient Greek who was the first to argue that “all thi...

  1. 76 FR 54283 - 30-Day Notice of Proposed Information Collections: Language Learning Survey Questions

    Science.gov (United States)

    2011-08-31

    ...: Language Learning Survey Questions ACTION: Notice of request for public comment and submission to OMB of... the Paperwork Reduction Act of 1995. Title of Information Collection: Language Learning Programs: Pre... critical language learning instruction. Estimated Number of Respondents: 1,400 annually Estimated Number of...

  2. Can i just check...? Effects of edit check questions on measurement error and survey estimates

    NARCIS (Netherlands)

    Lugtig, Peter; Jäckle, Annette

    2014-01-01

    Household income is difficult to measure, since it requires the collection of information about all potential income sources for each member of a household.Weassess the effects of two types of edit check questions on measurement error and survey estimates: within-wave edit checks use responses to

  3. Improving English Reading Comprehension Ability through Survey, Questions, Read, Record, Recite, Review Strategy (SQ4R)

    Science.gov (United States)

    Khusniyah, Nurul Lailatul; Lustyantie, Ninuk

    2017-01-01

    The aim of this study is to examine the effect of the survey, questions, read, record, recite, review (SQ4R) strategy of the reading comprehension ability students of 2nd semester. The research study was used action research method. The sampling was taken by 34 students. The validity of data used credibility, transferability, dependability, and…

  4. Using Text Message Surveys to Evaluate a Mobile Sexual Health Question-and-Answer Service.

    Science.gov (United States)

    Willoughby, Jessica Fitts; L'Engle, Kelly Ladin; Jackson, Kennon; Brickman, Jared

    2018-01-01

    Text message programs for sexual health are becoming increasingly popular as practitioners aim to meet youth on media they use frequently. Two-way mobile health (mHealth) interventions allow for feedback solicitation from participants. This study explores the use of a text message survey to assess demographics and program feedback from users of an adolescent sexual health text message question-and-answer service. Development and feasibility of the short-message service survey are discussed. The text message survey achieved a 43.9% response rate, which is comparable to response rates of surveys conducted via other methods. When compared to respondents who used the service and completed an online in-school questionnaire, text survey respondents were more likely to be female and older. They also reported higher service satisfaction. Results have implications for text message service providers and researchers. This article examines a community application of a new intervention strategy and research methodology.

  5. New tools for evaluating LQAS survey designs

    OpenAIRE

    Hund, Lauren

    2014-01-01

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are pr...

  6. Who Justifies Questionable Reporting Practices? Answers from a Representative Survey of Journalists in Germany

    Directory of Open Access Journals (Sweden)

    Philip Baugut

    2017-07-01

    Full Text Available Based on a secondary analysis of representative survey data of journalists in Germany (n= 1536, this paper draws attention to two variables that are important when it comes to explain whether journalists accept questionable reporting practices, such as paying people to obtain information or using confidential government documents without permission. First, perceived role achievement is important, as journalists who do not feel able to achieve an active role tend to accept questionable reporting practices more often. Second, however, this relationship is only true for journalists having a moderate tendency to the political left. Findings are explained by means of the theory of cognitive dissonance.

  7. Designing Surveys for Language Programs.

    Science.gov (United States)

    Brown, James Dean

    A discussion of survey methodology for investigating second language programs and instruction examines two methods: oral interviews and written questionnaires. Each method is defined, and variations are explored. For interviews, this includes individual, group, and telephone interviews. For questionnaires, this includes self-administered and…

  8. 76 FR 39966 - 30-Day Notice of Proposed Information Collections: ECA/P/V Youth and Leadership Survey Questions

    Science.gov (United States)

    2011-07-07

    .../V Youth and Leadership Survey Questions ACTION: Notice of request for public comment and submission... following information collection requests to the Office of Management and Budget (OMB) for approval in... Leadership Programs: Pre Program Survey Questions. OMB Control Number: None. Type of Request: New Collection...

  9. Multiagency radiation survey and site investigation manual (MARSSIM): Survey design

    International Nuclear Information System (INIS)

    Abelquist, E.W.; Berger, J.D.

    1996-01-01

    This paper describes the MultiAgency Radiation Survey and Site Investigation Manual (MARSSIM) strategy for designing a final status survey. The purpose of the final status survey is to demonstrate that release criteria established by the regulatory agency have been met. Survey design begins with identification of the contaminants and determination of whether the radionuclides of concern exist in background. The decommissioned site is segregated into Class 1, Class 2, and Class 3 areas, based on contamination potential, and each area is further divided into survey units. Appropriate reference areas for indoor and outdoor background measurements are selected. Survey instrumentation and techniques are selected in order to assure that the instrumentation is capable of detecting the contamination at the derived concentration guideline level (DCGL). Survey reference systems are established and the number of survey data points is determined-with the required number of data points distributed on a triangular grid Pattern. Two suitistical tests are used to evaluate data from final status surveys. For contaminants that are b, present in background, the Wilcoxon Rank Sum test is used; for contaminants that are not present in background, the Wilcoxon Signed Rank (or Sign) test is used. The number of data points needed to satisfy these nonparametric tests is based on the contaminant DCGL value, the expected Standard deviation of the contaminant in background and in the survey unit, and the acceptable probability of making Type I and Type II decision errors. The MARSSIM also requires a reasonable level of assurance that any small areas of elevated residual radioactivity that could be significant relative to regulatory limits are not missed during the final status survey. Measurements and sampling on a specified grid size are used to obtain an adequate assurance level that small locations of elevated radioactivity will Still satisfy DCGLs-applicable to small areas

  10. Simple neck pain questions used in surveys, evaluated in relation to health outcomes: a cohort study

    Science.gov (United States)

    2012-01-01

    Background The high prevalence of pain reported in many epidemiological studies, and the degree to which this prevalence reflects severe pain is under discussion in the literature. The aim of the present study was to evaluate use of the simple neck pain questions commonly included in large epidemiological survey studies with respect to aspects of health. We investigated if and how an increase in number of days with pain is associated with reduction in health outcomes. Methods A cohort of university students (baseline age 19–25 years) were recruited in 2002 and followed annually for 4 years. The baseline response rate was 69% which resulted in 1200 respondents (627 women, 573 men). Participants were asked about present and past pain and perceptions of their general health, sleep disturbance, stress and energy levels, and general performance. The data were analyzed using a mixed model for repeated measurements and a random intercept logistic model. Results When reporting present pain, participants also reported lower prevalence of very good health, higher stress and sleep disturbance scores and lower energy score. Among those with current neck pain, additional questions characterizing the pain such as duration (categorized), additional pain sites and decreased general performance were associated with lower probability of very good health and higher amounts of sleep disturbance. Knowing about the presence or not of pain explains more of the variation in health between individuals, than within individuals. Conclusion This study of young university students has demonstrated that simple neck pain survey questions capture features of pain that affect aspects of health such as perceived general health, sleep disturbance, mood in terms of stress and energy. Simple pain questions are more useful for group descriptions than for describing or following pain in an individual. PMID:23102060

  11. Simple neck pain questions used in surveys, evaluated in relation to health outcomes: a cohort study

    Directory of Open Access Journals (Sweden)

    Grimby-Ekman Anna

    2012-10-01

    Full Text Available Abstract Background The high prevalence of pain reported in many epidemiological studies, and the degree to which this prevalence reflects severe pain is under discussion in the literature. The aim of the present study was to evaluate use of the simple neck pain questions commonly included in large epidemiological survey studies with respect to aspects of health. We investigated if and how an increase in number of days with pain is associated with reduction in health outcomes. Methods A cohort of university students (baseline age 19–25 years were recruited in 2002 and followed annually for 4 years. The baseline response rate was 69% which resulted in 1200 respondents (627 women, 573 men. Participants were asked about present and past pain and perceptions of their general health, sleep disturbance, stress and energy levels, and general performance. The data were analyzed using a mixed model for repeated measurements and a random intercept logistic model. Results When reporting present pain, participants also reported lower prevalence of very good health, higher stress and sleep disturbance scores and lower energy score. Among those with current neck pain, additional questions characterizing the pain such as duration (categorized, additional pain sites and decreased general performance were associated with lower probability of very good health and higher amounts of sleep disturbance. Knowing about the presence or not of pain explains more of the variation in health between individuals, than within individuals. Conclusion This study of young university students has demonstrated that simple neck pain survey questions capture features of pain that affect aspects of health such as perceived general health, sleep disturbance, mood in terms of stress and energy. Simple pain questions are more useful for group descriptions than for describing or following pain in an individual.

  12. New tools for evaluating LQAS survey designs.

    Science.gov (United States)

    Hund, Lauren

    2014-02-15

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

  13. Explaining topic prevalence in answers to open-ended survey questions about climate change

    Science.gov (United States)

    Tvinnereim, Endre; Fløttum, Kjersti

    2015-08-01

    Citizens’ opinions are crucial for action on climate change, but are, owing to the complexity of the issue, diverse and potentially unformed. We contribute to the understanding of public views on climate change and to knowledge needed by decision-makers by using a new approach to analyse answers to the open survey question `what comes to mind when you hear the words `climate change’?’. We apply automated text analysis, specifically structural topic modelling, which induces distinct topics based on the relative frequencies of the words used in 2,115 responses. From these data, originating from the new, nationally representative Norwegian Citizen Panel, four distinct topics emerge: Weather/Ice, Future/Impact, Money/Consumption and Attribution. We find that Norwegians emphasize societal aspects of climate change more than do respondents in previous US and UK studies. Furthermore, variables that explain variation in closed questions, such as gender and education, yield different and surprising results when employed to explain variation in what respondents emphasize. Finally, the sharp distinction between scepticism and acceptance of conventional climate science, often seen in previous studies, blurs in many textual responses as scepticism frequently turns into ambivalence.

  14. Design of a statewide radiation survey

    International Nuclear Information System (INIS)

    Nagda, N.L.; Koontz, M.D.; Rector, H.E.; Nifong, G.D.

    1989-01-01

    The Florida Institute of Phosphate Research (FIPR) recently sponsored a statewide survey to identify all significant land areas in Florida where the state's environmental radiation rule should be applied. Under this rule, newly constructed buildings must be tested for radiation levels unless approved construction techniques are used. Two parallel surveys - a land-based survey and a population-based survey - were designed and conducted to address the objective. Each survey included measurements in more than 3000 residences throughout the state. Other information sources that existed at the outset of the study, such as geologic profiles mapped by previous investigators and terrestrial uranium levels characterized through aerial gamma radiation surveys, were also examined. Initial data analysis efforts focused on determining the extent of evidence of radon potential for each of 67 counties in the state. Within 18 countries that were determined to have definite evidence of elevated radon potential, more detailed spatial analyses were conducted to identify areas of which the rule should apply. A total of 74 quadrangles delineated by the U.S. Geological Survey, representing about 7% of those constituting the state, were identified as having elevated radon potential and being subject to the rule

  15. Interviewer and respondent interaction in survey interviews : Empirical evidence from behavior coding studies and question wording experiments

    NARCIS (Netherlands)

    Ongena, Yfke

    2010-01-01

    This book sheds light on verbal interaction problems in survey interviews. It is shown how behavior coding, i.e., coding the utterances of interviewer and respondent while they are answering survey questions, can be used to detect interactional problems. Several empirical studies using behavior

  16. Technology, design and dementia: an exploratory survey of developers.

    Science.gov (United States)

    Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

    2017-08-01

    Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

  17. Design and validation of the Quantum Mechanics Conceptual Survey

    Directory of Open Access Journals (Sweden)

    S. B. McKagan

    2010-11-01

    Full Text Available The Quantum Mechanics Conceptual Survey (QMCS is a 12-question survey of students’ conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included observations of students, a review of previous literature and textbooks and syllabi, faculty and student interviews, and statistical analysis. We also discuss issues in the development of specific questions, which may be useful both for instructors who wish to use the QMCS in their classes and for researchers who wish to conduct further research of student understanding of quantum mechanics. The QMCS has been most thoroughly tested in, and is most appropriate for assessment of (as a posttest only, sophomore-level modern physics courses. We also describe testing with students in junior quantum courses and graduate quantum courses, from which we conclude that the QMCS may be appropriate for assessing junior quantum courses, but is not appropriate for assessing graduate courses. One surprising result of our faculty interviews is a lack of faculty consensus on what topics should be taught in modern physics, which has made designing a test that is valued by a majority of physics faculty more difficult than expected.

  18. The effect of changes to question order on the prevalence of 'sufficient' physical activity in an Australian population survey.

    Science.gov (United States)

    Hanley, Christine; Duncan, Mitch J; Mummery, W Kerry

    2013-03-01

    Population surveys are frequently used to assess prevalence, correlates and health benefits of physical activity. However, nonsampling errors, such as question order effects, in surveys may lead to imprecision in self reported physical activity. This study examined the impact of modified question order in a commonly used physical activity questionnaire on the prevalence of sufficient physical activity. Data were obtained from a telephone survey of adults living in Queensland, Australia. A total of 1243 adults participated in the computer-assisted telephone interview (CATI) survey conducted in July 2008 which included the Active Australia Questionnaire (AAQ) presented in traditional or modified order. Binary logistic regression analyses was used to examine relationships between question order and physical activity outcomes. Significant relationships were found between question order and sufficient activity, recreational walking, moderate activity, vigorous activity, and total activity. Respondents who received the AAQ in modified order were more likely to be categorized as sufficiently active (OR = 1.28, 95% CI 1.01-1.60). This study highlights the importance of question order on estimates of self reported physical activity. This study has shown that changes in question order can lead to an increase in the proportion of participants classified as sufficiently active.

  19. Exploring the Learning Mechanism of Web-Based Question-Answering Systems and Their Design

    Science.gov (United States)

    Zhang, Yin

    2010-01-01

    In recent years, a number of models concerning question-answering (QA) systems have been put forward. But many of them stress technology and neglect the research of QA itself. In this paper, we analyse the essence of QA and discuss the relationship between technology and QA. On that basis, we propose that when designing web-based QA systems, more…

  20. CopperCore Service Integration, Integrating IMS Learning Design and IMS Question and Test Interoperability

    NARCIS (Netherlands)

    Vogten, Hubert; Martens, Harrie; Nadolski, Rob; Tattersall, Colin; Van Rosmalen, Peter; Koper, Rob

    2006-01-01

    Vogten, H., Martens, H., Nadolski, R., Tattersall, C., Rosmalen, van, P., Koper, R., (2006). CopperCore Service Integration, Integrating IMS Learning Design and IMS Question and Test Interoperability. Proceedings of the 6th IEEE International Conference on Advanced Learning Technologies (pp.

  1. Integrating IMS Learning Design and IMS Question and Test Interoperability using CopperCore Service Integration

    NARCIS (Netherlands)

    Vogten, Hubert; Martens, Harrie; Nadolski, Rob; Tattersall, Colin; Van Rosmalen, Peter; Koper, Rob

    2006-01-01

    Please, cite this publication as: Vogten, H., Martens, H., Nadolski, R., Tattersall, C., van Rosmalen, P., & Koper, R. (2006). Integrating IMS Learning Design and IMS Question and Test Interoperability using CopperCore Service Integration. Proceedings of International Workshop in Learning Networks

  2. Robustness of Adaptive Survey Designs to Inaccuracy of Design Parameters

    Directory of Open Access Journals (Sweden)

    Burger Joep

    2017-09-01

    Full Text Available Adaptive survey designs (ASDs optimize design features, given 1 the interactions between the design features and characteristics of sampling units and 2 a set of constraints, such as a budget and a minimum number of respondents. Estimation of the interactions is subject to both random and systematic error. In this article, we propose and evaluate four viewpoints to assess robustness of ASDs to inaccuracy of design parameter estimates: the effect of both imprecision and bias on both ASD structure and ASD performance. We additionally propose three distance measures to compare the structure of ASDs. The methodology is illustrated using a simple simulation study and a more complex but realistic case study on the Dutch Travel Survey. The proposed methodology can be applied to other ASD optimization problems. In our simulation study and case study, the ASD was fairly robust to imprecision, but not to realistic dynamics in the design parameters. To deal with the sensitivity of ASDs to changing design parameters, we recommend to learn and update the design parameters.

  3. Investigating Cognitive Effort and Response Quality of Question Formats in Web Surveys Using Paradata

    Science.gov (United States)

    Höhne, Jan Karem; Schlosser, Stephan; Krebs, Dagmar

    2017-01-01

    Measuring attitudes and opinions employing agree/disagree (A/D) questions is a common method in social research because it appears to be possible to measure different constructs with identical response scales. However, theoretical considerations suggest that A/D questions require a considerable cognitive processing. Item-specific (IS) questions,…

  4. Series: Practical guidance to qualitative research. Part 2: Context, research questions and designs.

    Science.gov (United States)

    Korstjens, Irene; Moser, Albine

    2017-12-01

    In the course of our supervisory work over the years, we have noticed that qualitative research tends to evoke a lot of questions and worries, so-called frequently asked questions (FAQs). This series of four articles intends to provide novice researchers with practical guidance for conducting high-quality qualitative research in primary care. By 'novice' we mean Master's students and junior researchers, as well as experienced quantitative researchers who are engaging in qualitative research for the first time. This series addresses their questions and provides researchers, readers, reviewers and editors with references to criteria and tools for judging the quality of qualitative research papers. This second article addresses FAQs about context, research questions and designs. Qualitative research takes into account the natural contexts in which individuals or groups function to provide an in-depth understanding of real-world problems. The research questions are generally broad and open to unexpected findings. The choice of a qualitative design primarily depends on the nature of the research problem, the research question(s) and the scientific knowledge one seeks. Ethnography, phenomenology and grounded theory are considered to represent the 'big three' qualitative approaches. Theory guides the researcher through the research process by providing a 'lens' to look at the phenomenon under study. Since qualitative researchers and the participants of their studies interact in a social process, researchers influence the research process. The first article described the key features of qualitative research, the third article will focus on sampling, data collection and analysis, while the last article focuses on trustworthiness and publishing.

  5. Research Designs and Special Education Research: Different Designs Address Different Questions

    Science.gov (United States)

    Cook, Bryan G.; Cook, Lysandra

    2016-01-01

    The aim of this article is to provide practitioners and other nonresearchers a basic understanding of research designs to aid in appropriately interpreting and applying research findings in special education. Research design provides the blueprint for conducting a research study and shapes what kind of knowledge is generated by the study. We…

  6. On framing the research question and choosing the appropriate research design.

    Science.gov (United States)

    Parfrey, Patrick S; Ravani, Pietro

    2015-01-01

    Clinical epidemiology is the science of human disease investigation with a focus on diagnosis, prognosis, and treatment. The generation of a reasonable question requires definition of patients, interventions, controls, and outcomes. The goal of research design is to minimize error, to ensure adequate samples, to measure input and output variables appropriately, to consider external and internal validities, to limit bias, and to address clinical as well as statistical relevance. The hierarchy of evidence for clinical decision-making places randomized controlled trials (RCT) or systematic review of good quality RCTs at the top of the evidence pyramid. Prognostic and etiologic questions are best addressed with longitudinal cohort studies.

  7. A new design of neutron survey instrument

    International Nuclear Information System (INIS)

    Tanner, R.J.; Eakins, J.S.; Hager, L.G.

    2010-01-01

    A novel design of neutron survey instrument has been developed. The moderator has been modified via the use of 'neutron guides', which help thermal neutrons reach the central proportional counter. This innovation has allowed the variations in the energy dependence of ambient dose equivalent response to be reduced compared to prior single-detector designs, whilst maintaining a relatively light moderator and simple construction. In particular, the design has a relatively small over-response to neutrons with energies around 5 keV, when compared to prior designs. The final optimized design has been verified using MCNP5 calculations to ensure that the response is relatively independent of the energy and direction of the incident neutron. This has required the ends of the guides to be structured so that unidirectional and isotropic neutron fields have closely matched responses, as is necessary in the workplace. The reading of the instrument in workplace fields is calculated via folding and the suitability of the design for use in the workplace discussed.

  8. Eksperimentasi Model Pembelajaran Survey, Question, Read, Recite, Review (Sq3r) Dan Survey, Question, Read, Reflect, Recite, Review (Sq4r) Ditinjau Dari Jenis Kelamin Dan Gaya Belajar

    OpenAIRE

    Wulandari, Septi; Budiyono, Budiyono; Iswahyudi, Gatut

    2016-01-01

    The aims of the research was to determine the effect of learning models on mathematics learning achievement viewed from gender and the student learning styles. The learning models compared were SQ3R, SQ4R, and direct instruction. This was a quasi experimental research using 3x2x3 factorial designs. The hypotheses testing used three ways ANOVA with unbalance cell. This research concludes that: (1) SQ4R learning provided better mathematics learning achievement than SQ3R and direct instruction, ...

  9. Unanswered clinical questions: a survey of specialists and primary care providers

    Directory of Open Access Journals (Sweden)

    Ellen Brassil, MSLS, MAT, AHIP

    2017-01-01

    Conclusions: While the reasons for unanswered clinical questions varied, thoughtful review of the responses suggested that a combination of educational strategies, embedded librarian services, and technology applications could help providers pursue answers to their clinical questions, enhance patient safety, and contribute to patient-based, self-directed learning.

  10. What do Americans think about public transit? A review of U.S. public opinion polling survey questions.

    Science.gov (United States)

    2015-07-01

    This seed grant research project compiled a set of 56 US public opinion polls that asked respondents their opinions about public : transit. The first and primary goal of the project was to assemble a large set of transit-related survey question...

  11. Visual Design, Order Effects, and Respondent Characteristics in a Self-Administered Survey

    Directory of Open Access Journals (Sweden)

    Michael Stern

    2007-12-01

    Full Text Available Recent survey design research has shown that small changes in the structure and visual layout of questions can affect respondents' answers. While the findings have provided strong evidence of such effects, they are limited by the homogeneity of their samples, in that many of these studies have used random samples of college students. In this paper, we examine the effects of seven experimental alterations in question format and visual design using data from a general population survey that allows us to examine the effects of demographic differences among respondents. Results from a 2005 random sample mail survey of 1,315 households in a small metropolitan region of the United States suggest that the visual layout of survey questions affects different demographic groups in similar ways.

  12. A cross-cultural survey of residents' perceived barriers in questioning/challenging authority.

    Science.gov (United States)

    Kobayashi, H; Pian-Smith, M; Sato, M; Sawa, R; Takeshita, T; Raemer, D

    2006-08-01

    To identify perceived barriers to residents' questioning or challenging their seniors, to determine how these barriers affect decisions, and to assess how these barriers differ across cultures. A written questionnaire was administered to residents in teaching hospitals in the US and Japan to assess factors affecting residents' willingness to question or challenge their superiors. The responses were analyzed for statistical significance of differences between the two cultures and to determine the importance of issues affecting decisions. Questionnaires were completed by 175 US and 65 Japanese residents, with an overall response rate of 71%. Trainees from both countries believe that questioning and challenging contribute to safety. The perceived importance of specific beliefs about the workplace differed across cultures in seven out of 22 questions. Residents' decisions to make a challenge were related to the relationships and perceived response of the superiors. There was no statistical difference between the US and Japanese residents in terms of the threshold for challenging their seniors. We have identified attributes of residents' beliefs of communication, including several cross-cultural differences in the importance of values and issues affecting one's decision to question or challenge. In contrast, there was no difference in the threshold for challenging seniors by the Japanese and US residents studied. Changes in organizational and professional culture may be as important, if not more so, than national culture to encourage "speaking up". Residents should be encouraged to overcome barriers to challenging, and training programs should foster improved relationships and communication between trainers and trainees.

  13. Design for Restoration: beyond the survey

    Directory of Open Access Journals (Sweden)

    Giovanni Carbonara

    2015-01-01

    Full Text Available  This new issue, that we can define special, marks an important change for DISEGNARECON (its transfer from the University of Bologna to the University of L’Aquila facing the topic of the Design for the Restoration in a way that is special too. Treated in fact - beside the outgoing editor in chief, Roberto Mingucci - by Mario Centofanti, who now assumes the responsibility for the magazine, and Giovanni Carbonara, which is definitely authoritative reference in the field. Sharing a strong interest for communicating the Restoration Project, they intended to indicate the substantial union of methods and objectives between the disciplines of architectural survey and of restoration, which makes the meaning of an aggregation now also institutionally formalized and particularly significant for the project on the existing architecture. 

  14. Southeast Region Headboat Survey-PPS Survey Design Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset is a record of trips selected during pilot procedures for the PPS design project designed to track the port agents ability to follow the PPS design and...

  15. Clinimetrics corner: choosing appropriate study designs for particular questions about treatment subgroups

    DEFF Research Database (Denmark)

    Kent, Peter; Hancock, Mark; Petersen, Ditte H.D

    2010-01-01

    that are inappropriate given the randomized controlled trial design used. The research design to choose, when developing a study protocol that investigates the effect of treatment subgroups, depends on the particular research question. Similarly, the inferences that can be drawn from an existing study will vary...... receive the same treatment?'; and (4) 'Are outcomes for a number of treatments better if those treatments are matched to patients in specific subgroups, than if the SAME treatments are randomly given to patients?'. Illustrative examples of these studies are provided. Conclusion: If the clinical usefulness......Background: Many clinicians and researchers believe that there are subgroups of people with spinal pain who respond differently to treatment and have different prognoses. There has been considerable interest in this topic recently. However, problems occur when conclusions about subgroups are made...

  16. Questionnaire design: carry-over effects of overall acceptance question placement and pre-evaluation instructions on overall acceptance scores in central location tests.

    Science.gov (United States)

    Bastian, Mauresa; Eggett, Dennis L; Jefferies, Laura K

    2015-02-01

    Question placement and usage of pre-evaluation instructions (PEI) in questionnaires for food sensory analysis may bias consumers' scores via carry-over effects. Data from consumer sensory panels previously conducted at a central location, spanning 11 years and covering a broad range of food product categories, were compiled. Overall acceptance (OA) question placement was studied with categories designated as first (the first evaluation question following demographic questions), after nongustation questions (immediately following questions that do not require panelists to taste the product), and later (following all other hedonic and just-about-right [JAR] questions, but occasionally before ranking, open-ended comments, and/or intent to purchase questions). Each panel was categorized as having or not having PEI in the questionnaire; PEI are instructions that appear immediately before the first evaluation question and show panelists all attributes they will evaluate before receiving test samples. Postpanel surveys were administered regarding the self-reported effect of PEI on panelists' evaluation experience. OA scores were analyzed and compared (1) between OA question placement categories and (2) between panels with and without PEI. For most product categories, OA scores tended to be lower when asked later in the questionnaire, suggesting evidence of a carry-over effect. Usage of PEI increased OA scores by 0.10 of a 9-point hedonic scale point, which is not practically significant. Postpanel survey data showed that presence of PEI typically improved the panelists' experience. Using PEI does not appear to introduce a meaningful carry-over effect. © 2015 Institute of Food Technologists®

  17. Designing web surveys for the multi-device internet

    NARCIS (Netherlands)

    de Bruijne, M.A.

    2015-01-01

    The rise of the mobile internet has rapidly changed the landscape for fielding web surveys. The devices that respondents use to take a web survey vary greatly in size and user interface. This diversity in the interaction between survey and respondent makes it challenging to design a web survey for

  18. Harriet Martineau and Her Contemporaries: Past Studies and Methodological Questions on Historical Surveys of Women.

    Science.gov (United States)

    Weiner, Gaby

    2000-01-01

    Presents the results of a historical survey of the contemporaries of Harriet Martineau who were born in the United Kingdom between 1792 and 1812. Focuses on the length of life, marital status, number of children, women's occupations, husbands' occupations (of married women), and fathers' occupations (of unmarried women). (CMK)

  19. Influence of English-Language Proficiency on the Cognitive Processing of Survey Questions

    Science.gov (United States)

    Park, Hyunjoo; Sha, M. Mandy; Willis, Gordon

    2016-01-01

    When recruiting respondents for cognitive interviews testing translated survey questionnaires, researchers often recommend interviewing monolingual non-English speakers because they are the likely users of the translations. However, these individuals are hard to recruit, and there is no standard definition of monolingual. Using cognitive interview…

  20. Aligning the Quantum Perspective of Learning to Instructional Design: Exploring the Seven Definitive Questions

    Directory of Open Access Journals (Sweden)

    Katherine J. Janzen

    2011-11-01

    Full Text Available This paper builds upon a foundational paper (under review which explores the rudiments of the quantum perspective of learning. The quantum perspective of learning uses the principles of exchange theory or borrowed theory from the field of quantum holism pioneered by quantum physicist David Bohm (1971, 1973 to understand learning in a new way. Bohm proposes that everything exists as wholes, rather than as parts, and that everything is connected. Similarly, the quantum perspective of learning proposes that individuals learn in holistic ways as they interact with temporal and in infinitely extending virtual worlds. Further, according to the quantum perspective of learning, learners have infinite potential. In this paper, the quantum perspective of learning is examined utilizing a combination of Schunk’s (1991 and Ertmer and Newby’s (1993 definitive questions for aligning learning theory with instructional design. These seven definitive questions focus on how learning happens, influential factors in learning, the role of memory, transfer of knowledge, modalities of learning that can best explain the quantum perspective of learning, applicable assumptions, and a discussion of how instruction can be organized to optimize learning. Examples of strategies that facilitate the quantum perspective of learning are provided.

  1. [The mixed design in nursing sciences or when a question of research calls for qualitative and quantitative strategies].

    Science.gov (United States)

    Bourgault, Patricia; Gallagher, Frances; Michaud, Cécile; Saint-Cyr-Tribble, Denise

    2010-12-01

    The use of a mixed method research design raises many questions, especially regarding the paradigmatic position. With this paradigm, we may consider the mixed method design as the best way of answering a research question and the latter orients to one of the different subtypes of mixed method design. To illustrate the use of this kind of design, we propose a study such as conducted in nursing sciences. In this article, the challenges raised by the mixed method design, and the place of this type of research in nursing sciences is discussed.

  2. [Dentists' Knowledge of Ethical Questions Regarding Dental Medicine - A Survey of Dentists from Saxony, Saxony-Anhalt and Thuringia (Germany)].

    Science.gov (United States)

    Schochow, M; Christel, A; Lautenschläger, C; Steger, F

    2016-12-01

    Background: Subjects regarding ethical questions in dental medicine are only slightly touched in the study of dental medicine or in the working regulations of the dentists' association. However, dentists are confronted with these matters in everyday working life. The empirical study at hand collects current data regarding the ethical knowledge about dental medicine in the practical experience of dentists in Saxony, Saxony-Anhalt, and Thuringia. Methods: The tool used in the survey was a structured questionnaire. Out of 600 randomly chosen and contacted dentists from Saxony, Saxony-Anhalt, and Thuringia, 290 replied (response rate: 48.3%). The anonymised assessment took place between June and November 2013. Results: Dentists frequently encounter ethical questions regarding dental matters. The dentists interviewed in the study are in favour of a participative relationship between patient and dentist. Simultaneously, the patient's health is predominantly seen as the good of higher value than his or her self-determination. The dentists show competent knowledge of ethical dental subjects, although increased uncertainties could be observed in more complex situations, e. g. considering contact with patients who are HIV-positive. Conclusions: Questions dealing with dental ethical questions do play a major role in the daily professional life of dentists. In order to further support and strengthen dentists in their individual dental ethical competence, we see a need for advanced training and further education regarding questions and problems in the area of ethics in dental medicine. Also, these topics should become a component in the curriculum of the study of dental medicine. © Georg Thieme Verlag KG Stuttgart · New York.

  3. Tackling the Survey: A Learning-by-Induction Design

    Science.gov (United States)

    Witte, Anne E.

    2017-01-01

    Free online survey tools provide a practical learning-by-induction platform for business communication instructors interested in trying out an advanced multidisciplinary survey activity coupled with an innovative teaching design. More than just building skills in marketing, survey projects marshal a wider set of thinking and doing activities that…

  4. Sample design considerations of indoor air exposure surveys

    International Nuclear Information System (INIS)

    Cox, B.G.; Mage, D.T.; Immerman, F.W.

    1988-01-01

    Concern about the potential for indoor air pollution has prompted recent surveys of radon and NO 2 concentrations in homes and personal exposure studies of volatile organics, carbon monoxide and pesticides, to name a few. The statistical problems in designing sample surveys that measure the physical environment are diverse and more complicated than those encountered in traditional surveys of human attitudes and attributes. This paper addresses issues encountered when designing indoor air quality (IAQ) studies. General statistical concepts related to target population definition, frame creation, and sample selection for area household surveys and telephone surveys are presented. The implications of different measurement approaches are discussed, and response rate considerations are described

  5. The 2003 Australian Breast Health Survey: survey design and preliminary results

    Directory of Open Access Journals (Sweden)

    Favelle Simone

    2008-01-01

    Full Text Available Abstract Background The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. Methods The 2003 BHS surveyed English-speaking Australian women aged 30–69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Results Of the 3,144 respondents who consented to being interviewed, 138 (4.4% had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1% reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9% had heard of the BreastScreen Australia (BSA program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. Conclusion The

  6. The 2003 Australian Breast Health Survey: survey design and preliminary results.

    Science.gov (United States)

    Villanueva, Elmer V; Jones, Sandra; Nehill, Caroline; Favelle, Simone; Steel, David; Iverson, Donald; Zorbas, Helen

    2008-01-14

    The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC) in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. The 2003 BHS surveyed English-speaking Australian women aged 30-69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Of the 3,144 respondents who consented to being interviewed, 138 (4.4%) had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1%) reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9%) had heard of the BreastScreen Australia (BSA) program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. The NBCC Breast Health Surveys provide a valuable picture of the

  7. Learning Physics Teaching through Collaborative Design of Conceptual Multiple-Choice Questions

    Science.gov (United States)

    Milner-Bolotin, Marina

    2015-01-01

    Increasing student engagement through Electronic Response Systems (clickers) has been widely researched. Its success largely depends on the quality of multiple-choice questions used by instructors. This paper describes a pilot project that focused on the implementation of online collaborative multiple-choice question repository, PeerWise, in a…

  8. Series: Practical guidance to qualitative research : part 2: context, research questions and designs

    NARCIS (Netherlands)

    Albine Moser; Irene Korstjens

    2017-01-01

    In the course of our supervisory work over the years, we have noticed that qualitative research tends to evoke a lot of questions and worries, so-called frequently asked questions (FAQs). This series of four articles intends to provide novice researchers with practical guidance for conducting

  9. Questioning the Questions

    Science.gov (United States)

    Tienken, Christopher H.; Goldberg, Stephanie; DiRocco, Dominic

    2010-01-01

    Historical accounts of questioning used in the education process trace back to Socrates. One of the best examples of his use of questioning is found in Plato's "The Republic." Socrates used a series of strategic questions to help his student Glaucon come to understand the concept of justice. Socrates purposefully posed a series of…

  10. Design-Build Partnership Attributes Survey Analysis

    National Research Council Canada - National Science Library

    Pyle, Raymond

    1998-01-01

    Two basic hypotheses were investigated: 1. Finding these attributes for success for a design-build partnership may be accomplished by transferring concepts and ideas from business research on partnership formation. 2...

  11. Series: Practical guidance to qualitative research: part 2: context, research questions and designs

    OpenAIRE

    Moser, Albine; Korstjens, Irene

    2017-01-01

    In the course of our supervisory work over the years, we have noticed that qualitative research tends to evoke a lot of questions and worries, so-called frequently asked questions (FAQs). This series of four articles intends to provide novice researchers with practical guidance for conducting high-quality qualitative research in primary care. By ‘novice’ we mean Master’s students and junior researchers, as well as experienced quantitative researchers who are engaging in qualitative research f...

  12. The Dark Energy Survey instrument design

    International Nuclear Information System (INIS)

    Flaugher, B.; Fermilab

    2006-01-01

    We describe a new project, the Dark Energy Survey (DES), aimed at measuring the dark energy equation of state parameter, w, to a statistical precision of ∼5%, with four complementary techniques. The survey will use a new 3 sq. deg. mosaic camera (DECam) mounted at the prime focus of the Blanco 4m telescope at the Cerro-Tololo International Observatory (CTIO). DECam includes a large mosaic camera, a five element optical corrector, four filters (g,r,i,z), and the associated infrastructure for operation in the prime focus cage. The focal plane consists of 62 2K x 4K CCD modules (0.27''/pixel) arranged in a hexagon inscribed within the 2.2 deg. diameter field of view. We plan to use the 250 micron thick fully-depleted CCDs that have been developed at the Lawrence Berkeley National Laboratory (LBNL). At Fermilab, we will establish a packaging factory to produce four-side buttable modules for the LBNL devices, as well as to test and grade the CCDs. R and D is underway and delivery of DECam to CTIO is scheduled for 2009

  13. Ubiquitous Surveys Reveal Shallow Research Designs (Commentary).

    Science.gov (United States)

    McDaniel, Charles-Gene

    1990-01-01

    Criticizes the large amount of often irrelevant, poorly designed, and poorly written quantitative journalism research. Notes that journalism education and mass communication education research published in scholarly journals is largely ignored by professional journalists, who find more value in the qualitative research reported in the journalism…

  14. Importance of Survey Design for Studying the Epidemiology of Emerging Tobacco Product Use Among Youth.

    Science.gov (United States)

    Delnevo, Cristine D; Gundersen, Daniel A; Manderski, Michelle T B; Giovenco, Daniel P; Giovino, Gary A

    2017-08-15

    Accurate surveillance is critical for monitoring the epidemiology of emerging tobacco products in the United States, and survey science suggests that survey response format can impact prevalence estimates. We utilized data from the 2014 New Jersey Youth Tobacco Survey (n = 3,909) to compare estimates of the prevalence of 4 behaviors (ever hookah use, current hookah use, ever e-cigarette use, and current e-cigarette use) among New Jersey high school students, as assessed using "check-all-that-apply" questions, with estimates measured by means of "forced-choice" questions. Measurement discrepancies were apparent for all 4 outcomes, with the forced-choice questions yielding prevalence estimates approximately twice those of the check-all-that-apply questions, and agreement was fair to moderate. The sensitivity of the check-all-that-apply questions, treating the forced-choice format as the "gold standard," ranged from 38.1% (current hookah use) to 58.3% (ever e-cigarette use), indicating substantial false-negative rates. These findings highlight the impact of question response format on prevalence estimates of emerging tobacco products among youth and suggest that estimates generated by means of check-all-that-apply questions may be biased downward. Alternative survey designs should be considered to avoid check-all-that-apply response formats, and researchers should use caution when interpreting tobacco use data obtained from check-all-that-apply formats. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  15. Methodological design of the National Health and Nutrition Survey 2016

    OpenAIRE

    Martín Romero-Martínez; Teresa Shamah-Levy; Lucia Cuevas-Nasu; Ignacio Méndez Gómez-Humarán; Elsa Berenice Gaona-Pineda; Luz María Gómez-Acosta; Juan Ángel Rivera-Dommarco; Mauricio Hernández-Ávila

    2017-01-01

    Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organizat...

  16. Translating Answers to Open-Ended Survey Questions in Cross-Cultural Research: A Case Study on the Interplay between Translation, Coding, and Analysis

    Science.gov (United States)

    Behr, Dorothée

    2015-01-01

    Open-ended probing questions in cross-cultural surveys help uncover equivalence problems in cross-cultural survey research. For languages that a project team does not understand, probe answers need to be translated into a common project language. This article presents a case study on translating open-ended, that is, narrative answers. It describes…

  17. Sample design for the residential energy consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    The purpose of this report is to provide detailed information about the multistage area-probability sample design used for the Residential Energy Consumption Survey (RECS). It is intended as a technical report, for use by statisticians, to better understand the theory and procedures followed in the creation of the RECS sample frame. For a more cursory overview of the RECS sample design, refer to the appendix entitled ``How the Survey was Conducted,`` which is included in the statistical reports produced for each RECS survey year.

  18. Optical Design for a Survey X-Ray Telescope

    Science.gov (United States)

    Saha, Timo T.; Zhang, William W.; McClelland, Ryan S.

    2014-01-01

    Optical design trades are underway at the Goddard Space Flight Center to define a telescope for an x-ray survey mission. Top-level science objectives of the mission include the study of x-ray transients, surveying and long-term monitoring of compact objects in nearby galaxies, as well as both deep and wide-field x-ray surveys. In this paper we consider Wolter, Wolter-Schwarzschild, and modified Wolter-Schwarzschild telescope designs as basic building blocks for the tightly nested survey telescope. Design principles and dominating aberrations of individual telescopes and nested telescopes are discussed and we compare the off-axis optical performance at 1.0 KeV and 4.0 KeV across a 1.0-degree full field-of-view.

  19. ACT-CCREC Core Research Program: Study Questions and Design. ACT Working Paper Series. WP-2015-01

    Science.gov (United States)

    Cruce, Ty M.

    2015-01-01

    This report provides a non-technical overview of the guiding research questions and research design for the ACT-led core research program conducted on behalf of the GEAR UP College and Career Readiness Evaluation Consortium (CCREC). The core research program is a longitudinal study of the effectiveness of 14 GEAR UP state grants on the academic…

  20. Optimising cluster survey design for planning schistosomiasis preventive chemotherapy.

    Directory of Open Access Journals (Sweden)

    Sarah C L Knowles

    2017-05-01

    Full Text Available The cornerstone of current schistosomiasis control programmes is delivery of praziquantel to at-risk populations. Such preventive chemotherapy requires accurate information on the geographic distribution of infection, yet the performance of alternative survey designs for estimating prevalence and converting this into treatment decisions has not been thoroughly evaluated.We used baseline schistosomiasis mapping surveys from three countries (Malawi, Côte d'Ivoire and Liberia to generate spatially realistic gold standard datasets, against which we tested alternative two-stage cluster survey designs. We assessed how sampling different numbers of schools per district (2-20 and children per school (10-50 influences the accuracy of prevalence estimates and treatment class assignment, and we compared survey cost-efficiency using data from Malawi. Due to the focal nature of schistosomiasis, up to 53% simulated surveys involving 2-5 schools per district failed to detect schistosomiasis in low endemicity areas (1-10% prevalence. Increasing the number of schools surveyed per district improved treatment class assignment far more than increasing the number of children sampled per school. For Malawi, surveys of 15 schools per district and 20-30 children per school reliably detected endemic schistosomiasis and maximised cost-efficiency. In sensitivity analyses where treatment costs and the country considered were varied, optimal survey size was remarkably consistent, with cost-efficiency maximised at 15-20 schools per district.Among two-stage cluster surveys for schistosomiasis, our simulations indicated that surveying 15-20 schools per district and 20-30 children per school optimised cost-efficiency and minimised the risk of under-treatment, with surveys involving more schools of greater cost-efficiency as treatment costs rose.

  1. When is a research question not a research question?

    Science.gov (United States)

    Mayo, Nancy E; Asano, Miho; Barbic, Skye Pamela

    2013-06-01

    Research is undertaken to answer important questions yet often the question is poorly expressed and lacks information on the population, the exposure or intervention, the comparison, and the outcome. An optimal research question sets out what the investigator wants to know, not what the investigator might do, nor what the results of the study might ultimately contribute. The purpose of this paper is to estimate the extent to which rehabilitation scientists optimally define their research questions. A cross-sectional survey of the rehabilitation research articles published during 2008. Two raters independently rated each question according to pre-specified criteria; a third rater adjudicated all discrepant ratings. The proportion of the 258 articles with a question formulated as methods or expected contribution and not as what knowledge was being sought was 65%; 30% of questions required reworking. The designs which most often had poorly formulated research questions were randomized trials, cross-sectional and measurement studies. Formulating the research question is not purely a semantic concern. When the question is poorly formulated, the design, analysis, sample size calculations, and presentation of results may not be optimal. The gap between research and clinical practice could be bridged by a clear, complete, and informative research question.

  2. Designing and conducting survey research a comprehensive guide

    CERN Document Server

    Rea, Louis M

    2014-01-01

    The industry standard guide, updated with new ideas and SPSS analysis techniques Designing and Conducting Survey Research: A Comprehensive Guide Fourth Edition is the industry standard resource that covers all major components of the survey process, updated to include new data analysis techniques and SPSS procedures with sample data sets online. The book offers practical, actionable guidance on constructing the instrument, administrating the process, and analyzing and reporting the results, providing extensive examples and worksheets that demonstrate the appropriate use of survey and data tech

  3. Variation in choice of study design: findings from the Epidemiology Design Decision Inventory and Evaluation (EDDIE) survey.

    Science.gov (United States)

    Stang, Paul E; Ryan, Patrick B; Overhage, J Marc; Schuemie, Martijn J; Hartzema, Abraham G; Welebob, Emily

    2013-10-01

    Researchers using observational data to understand drug effects must make a number of analytic design choices that suit the characteristics of the data and the subject of the study. Review of the published literature suggests that there is a lack of consistency even when addressing the same research question in the same database. To characterize the degree of similarity or difference in the method and analysis choices made by observational database research experts when presented with research study scenarios. On-line survey using research scenarios on drug-effect studies to capture method selection and analysis choices that follow a dependency branching based on response to key questions. Voluntary participants experienced in epidemiological study design solicited for participation through registration on the Observational Medical Outcomes Partnership website, membership in particular professional organizations, or links in relevant newsletters. Description (proportion) of respondents selecting particular methods and making specific analysis choices based on individual drug-outcome scenario pairs. The number of questions/decisions differed based on stem questions of study design, time-at-risk, outcome definition, and comparator. There is little consistency across scenarios, by drug or by outcome of interest, in the decisions made for design and analyses in scenarios using large healthcare databases. The most consistent choice was the cohort study design but variability in the other critical decisions was common. There is great variation among epidemiologists in the design and analytical choices that they make when implementing analyses in observational healthcare databases. These findings confirm that it will be important to generate empiric evidence to inform these decisions and to promote a better understanding of the impact of standardization on research implementation.

  4. Discussion and group work design in O2O teaching of applied optics: questions, strategies and extending

    Science.gov (United States)

    Li, Xiaotong; Cen, Zhaofeng; Liu, Xiangdong; Zheng, Zhenrong

    2017-08-01

    Applied optics course in Zhejiang University is a National Excellent Resource Sharing Course in China, and the online to offline teaching strategies have been implemented and shared with dozens of universities and colleges in China. Discussion is an important activity in teaching. In this paper our main consideration is designing the discussion questions and group works so as to develop the students' critical thinking, cooperative and sharing spirits, and communication abilities in the cosmopolitan era. Typical questions that connect different chapters and help the students to understand the relationship between each sub-system in both field of view and aperture are given for discussion. We inspire the students to complete group works such as ray trace programming by cooperation and then make presentations. All of these create a circumstance for sharing thoughts and developing intelligence and knowledge. A poll shows that the students pay more attention to optical design than before and have made progress in conversation and cooperation.

  5. Finite Element Analysis as a response to frequently asked questions of machine tool mechanical design-engineers

    Directory of Open Access Journals (Sweden)

    Kehl Gerhard

    2017-01-01

    Full Text Available The finite element analysis (FEA nowadays is indispensable in the product development of machining centres and production machinery for metal cutting processes. It enables extensive static, dynamic and thermal simulation of digital prototypes of machine tools before production start-up. But until now less reflection has been made about what are the most pressing questions to be answered in this application field, with the intention to align the modelling and simulation methods with substantial requirements. Based on 3D CAD geometry data for a modern machining centre (Deckel-Maho-Gildemeister DMG 635 V eco merely the basic steps of a static analysis are reconstructed by FEA. Particularly the two most frequently asked questions by the design departments of machine tool manufacturers are discussed and highlighted. For this authentic simulation results are used, at which their selection is a consequence of long lasting experience in the industrial application of FEA in the design process chain. Noticing that such machine tools are mechatronic systems applying a considerable number of actuators, sensors and controllers in addition to mechanical structures, the answers to those core questions are required for design enhancement, to save costs and to improve the productivity and the quality of machined workpieces.

  6. : Urban design, urban project, urban art, urban composition ... a question of vocabulary?

    OpenAIRE

    Pinson , Daniel

    2014-01-01

    Actes à paraître; International audience; The term "urbanism" of Pierre Clerget (1910) put the mess in the practice and the formations in France. Urban planning is thus, on the academic level, a coexistence of disciplinary approaches, which does not help to a multidisciplinary urban training. Thinking about "urban design", after beautifull city, urban composition, or alongside the urban project and other territorial approaches can help to see more clearly in town planning.; Le terme « urbanis...

  7. Quality Control in Survey Design: Evaluating a Survey of Educators’ Attitudes Concerning Differentiated Compensation

    OpenAIRE

    Kelly D. Bradley; Michael Peabody; Shannon O. Sampson

    2015-01-01

    This study utilized the Rasch model to assess the quality of a survey instrument designed to measure attitudes of administrators and teachers concerning a differentiated teacher compensation program piloted in Kentucky.  Researchers addressing potentially contentious issues should ensure their methods stand up to rigorous criticism.  The results indicate that the rating scale does not function as expected, with items being too easy to endorse.  Future iterations of this survey should be revis...

  8. A GOAL QUESTION METRIC (GQM APPROACH FOR EVALUATING INTERACTION DESIGN PATTERNS IN DRAWING GAMES FOR PRESCHOOL CHILDREN

    Directory of Open Access Journals (Sweden)

    Dana Sulistiyo Kusumo

    2017-06-01

    Full Text Available In recent years, there has been an increasing interest to use smart devices’ drawing games for educational benefit. In Indonesia, our government classifies children age four to six years old as preschool children. Not all preschool children can use drawing games easily. Further, drawing games may not fulfill all Indonesia's preschool children’s drawing competencies. This research proposes to use Goal-Question Metric (GQM to investigate and evaluate interaction design patterns of preschool children in order to achieve the drawing competencies for preschool children in two drawing Android-based games: Belajar Menggambar (in English: Learn to Draw and Coret: Belajar Menggambar (in English: Scratch: Learn to Draw. We collected data from nine students of a preschool children education in a user research. The results show that GQM can assist to evaluate interaction design patterns in achieving the drawing competencies. Our approach can also yield interaction design patterns by comparing interaction design patterns in two drawing games used.

  9. Farm survey design in the Sahel : Experiences from Burkina Faso

    NARCIS (Netherlands)

    Graaff, de J.; Mijl, van der J.P.; Nibbering, J.W.

    1999-01-01

    In designing farm household surveys in the Sahel in West Africa much attention should be paid to various specific features of the farming systems. These features relate in particular to the social organisation of the farming communities. Within households, kinship relations have a strong bearing on

  10. Survey, design, development, and installation of micro hydel power generation

    International Nuclear Information System (INIS)

    Ijaz, M.

    2011-01-01

    This paper presents the survey, design, development and installation Of micro hydel power generation using low head Kaplan water turbine. Electricity production from hydro power has been and still is today, the first renewable source used to generate electricity. The development of energy from renewable is very important step in reduction of carbon emissions(CO/sub 2/).

  11. A SUCCESSFUL BROADBAND SURVEY FOR GIANT Ly{alpha} NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

    Energy Technology Data Exchange (ETDEWEB)

    Prescott, Moire K. M. [Department of Physics, Broida Hall, Mail Code 9530, University of California, Santa Barbara, CA 93106 (United States); Dey, Arjun; Jannuzi, Buell T., E-mail: mkpresco@physics.ucsb.edu [National Optical Astronomy Observatory, 950 North Cherry Avenue, Tucson, AZ 85719 (United States)

    2012-04-01

    Giant Ly{alpha} nebulae (or Ly{alpha} 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Ly{alpha} nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Ly{alpha} nebulae at 2 {approx}< z {approx}< 3 within deep broadband imaging and have carried out a survey of the 9.4 deg{sup 2} NOAO Deep Wide-Field Survey Booetes field. With a total survey comoving volume of Almost-Equal-To 10{sup 8} h{sup -3}{sub 70} Mpc{sup 3}, this is the largest volume survey for Ly{alpha} nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Ly{alpha} nebula.

  12. Exploring cosmic origins with CORE: Survey requirements and mission design

    Science.gov (United States)

    Delabrouille, J.; de Bernardis, P.; Bouchet, F. R.; Achúcarro, A.; Ade, P. A. R.; Allison, R.; Arroja, F.; Artal, E.; Ashdown, M.; Baccigalupi, C.; Ballardini, M.; Banday, A. J.; Banerji, R.; Barbosa, D.; Bartlett, J.; Bartolo, N.; Basak, S.; Baselmans, J. J. A.; Basu, K.; Battistelli, E. S.; Battye, R.; Baumann, D.; Benoít, A.; Bersanelli, M.; Bideaud, A.; Biesiada, M.; Bilicki, M.; Bonaldi, A.; Bonato, M.; Borrill, J.; Boulanger, F.; Brinckmann, T.; Brown, M. L.; Bucher, M.; Burigana, C.; Buzzelli, A.; Cabass, G.; Cai, Z.-Y.; Calvo, M.; Caputo, A.; Carvalho, C.-S.; Casas, F. J.; Castellano, G.; Catalano, A.; Challinor, A.; Charles, I.; Chluba, J.; Clements, D. L.; Clesse, S.; Colafrancesco, S.; Colantoni, I.; Contreras, D.; Coppolecchia, A.; Crook, M.; D'Alessandro, G.; D'Amico, G.; da Silva, A.; de Avillez, M.; de Gasperis, G.; De Petris, M.; de Zotti, G.; Danese, L.; Désert, F.-X.; Desjacques, V.; Di Valentino, E.; Dickinson, C.; Diego, J. M.; Doyle, S.; Durrer, R.; Dvorkin, C.; Eriksen, H. K.; Errard, J.; Feeney, S.; Fernández-Cobos, R.; Finelli, F.; Forastieri, F.; Franceschet, C.; Fuskeland, U.; Galli, S.; Génova-Santos, R. T.; Gerbino, M.; Giusarma, E.; Gomez, A.; González-Nuevo, J.; Grandis, S.; Greenslade, J.; Goupy, J.; Hagstotz, S.; Hanany, S.; Handley, W.; Henrot-Versillé, S.; Hernández-Monteagudo, C.; Hervias-Caimapo, C.; Hills, M.; Hindmarsh, M.; Hivon, E.; Hoang, D. T.; Hooper, D. C.; Hu, B.; Keihänen, E.; Keskitalo, R.; Kiiveri, K.; Kisner, T.; Kitching, T.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lamagna, L.; Lapi, A.; Lasenby, A.; Lattanzi, M.; Le Brun, A. M. C.; Lesgourgues, J.; Liguori, M.; Lindholm, V.; Lizarraga, J.; Luzzi, G.; Macìas-P{érez, J. F.; Maffei, B.; Mandolesi, N.; Martin, S.; Martinez-Gonzalez, E.; Martins, C. J. A. P.; Masi, S.; Massardi, M.; Matarrese, S.; Mazzotta, P.; McCarthy, D.; Melchiorri, A.; Melin, J.-B.; Mennella, A.; Mohr, J.; Molinari, D.; Monfardini, A.; Montier, L.; Natoli, P.; Negrello, M.; Notari, A.; Noviello, F.; Oppizzi, F.; O'Sullivan, C.; Pagano, L.; Paiella, A.; Pajer, E.; Paoletti, D.; Paradiso, S.; Partridge, R. B.; Patanchon, G.; Patil, S. P.; Perdereau, O.; Piacentini, F.; Piat, M.; Pisano, G.; Polastri, L.; Polenta, G.; Pollo, A.; Ponthieu, N.; Poulin, V.; Prêle, D.; Quartin, M.; Ravenni, A.; Remazeilles, M.; Renzi, A.; Ringeval, C.; Roest, D.; Roman, M.; Roukema, B. F.; Rubiño-Martin, J.-A.; Salvati, L.; Scott, D.; Serjeant, S.; Signorelli, G.; Starobinsky, A. A.; Sunyaev, R.; Tan, C. Y.; Tartari, A.; Tasinato, G.; Toffolatti, L.; Tomasi, M.; Torrado, J.; Tramonte, D.; Trappe, N.; Triqueneaux, S.; Tristram, M.; Trombetti, T.; Tucci, M.; Tucker, C.; Urrestilla, J.; Väliviita, J.; Van de Weygaert, R.; Van Tent, B.; Vennin, V.; Verde, L.; Vermeulen, G.; Vielva, P.; Vittorio, N.; Voisin, F.; Wallis, C.; Wandelt, B.; Wehus, I. K.; Weller, J.; Young, K.; Zannoni, M.

    2018-04-01

    Future observations of cosmic microwave background (CMB) polarisation have the potential to answer some of the most fundamental questions of modern physics and cosmology, including: what physical process gave birth to the Universe we see today? What are the dark matter and dark energy that seem to constitute 95% of the energy density of the Universe? Do we need extensions to the standard model of particle physics and fundamental interactions? Is the ΛCDM cosmological scenario correct, or are we missing an essential piece of the puzzle? In this paper, we list the requirements for a future CMB polarisation survey addressing these scientific objectives, and discuss the design drivers of the COREmfive space mission proposed to ESA in answer to the "M5" call for a medium-sized mission. The rationale and options, and the methodologies used to assess the mission's performance, are of interest to other future CMB mission design studies. COREmfive has 19 frequency channels, distributed over a broad frequency range, spanning the 60–600 GHz interval, to control astrophysical foreground emission. The angular resolution ranges from 2' to 18', and the aggregate CMB sensitivity is about 2 μKṡarcmin. The observations are made with a single integrated focal-plane instrument, consisting of an array of 2100 cryogenically-cooled, linearly-polarised detectors at the focus of a 1.2-m aperture cross-Dragone telescope. The mission is designed to minimise all sources of systematic effects, which must be controlled so that no more than 10‑4 of the intensity leaks into polarisation maps, and no more than about 1% of E-type polarisation leaks into B-type modes. COREmfive observes the sky from a large Lissajous orbit around the Sun-Earth L2 point on an orbit that offers stable observing conditions and avoids contamination from sidelobe pick-up of stray radiation originating from the Sun, Earth, and Moon. The entire sky is observed repeatedly during four years of continuous scanning

  13. The influence of question design on the response to self-assessment in www.elearnSCI.org

    DEFF Research Database (Denmark)

    Liu, N; Li, X-W; Zhou, M-W

    2015-01-01

    STUDY DESIGN: This is an interventional training session. OBJECTIVE: The objective of this study was to investigate the difference in response to self-assessment questions in the original and an adjusted version for a submodule of www.elearnSCI.org for student nurses. SETTING: The study was condu......STUDY DESIGN: This is an interventional training session. OBJECTIVE: The objective of this study was to investigate the difference in response to self-assessment questions in the original and an adjusted version for a submodule of www.elearnSCI.org for student nurses. SETTING: The study...... was conducted in a teaching hospital affiliated to Peking University, China. METHODS: In all, 28 student nurses divided into two groups (groups A and B; 14 in each) received a print-out of a Chinese translation of the slides from the 'Maintaining skin integrity following spinal cord injury' submodule in www.elearnSCI...... be avoided because it would increase the number of correct answers arrived at by guessing. When using multiple-answer MCQs, it is recommended that the questions asked should be in accordance with the content within the www.elearnSCI.org....

  14. Designing questionnaires: healthcare survey to compare two different response scales

    Science.gov (United States)

    2014-01-01

    Background A widely discussed design issue in patient satisfaction questionnaires is the optimal length and labelling of the answering scale. The aim of the present study was to compare intra-individually the answers on two response scales to five general questions evaluating patients’ perception of hospital care. Methods Between November 2011 and January 2012, all in-hospital patients at a Swiss University Hospital received a patient satisfaction questionnaire on an adjectival scale with three to four labelled categories (LS) and five redundant questions displayed on an 11-point end-anchored numeric scale (NS). The scales were compared concerning ceiling effect, internal consistency (Cronbach’s alpha), individual item answers (Spearman’s rank correlation), and concerning overall satisfaction by calculating an overall percentage score (sum of all answers related to the maximum possible sum). Results The response rate was 41% (2957/7158), of which 2400 (81%) completely filled out all questions. Baseline characteristics of the responders and non-responders were similar. Floor and ceiling effect were high on both response scales, but more pronounced on the LS than on the NS. Cronbach’s alpha was higher on the NS than on the LS. There was a strong individual item correlation between both answering scales in questions regarding the intent to return, quality of treatment and the judgement whether the patient was treated with respect and dignity, but a lower correlation concerning satisfactory information transfer by physicians or nurses, where only three categories were available in the LS. The overall percentage score showed a comparable distribution, but with a wider spread of lower satisfaction in the NS. Conclusions Since the longer scale did not substantially reduce the ceiling effect, the type of questions rather than the type of answering scale could be addressed with a focus on specific questions about concrete situations instead of general questions

  15. Metamodels for Computer-Based Engineering Design: Survey and Recommendations

    Science.gov (United States)

    Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

    1997-01-01

    The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

  16. [Methodological design of the National Health and Nutrition Survey 2016].

    Science.gov (United States)

    Romero-Martínez, Martín; Shamah-Levy, Teresa; Cuevas-Nasu, Lucía; Gómez-Humarán, Ignacio Méndez; Gaona-Pineda, Elsa Berenice; Gómez-Acosta, Luz María; Rivera-Dommarco, Juan Ángel; Hernández-Ávila, Mauricio

    2017-01-01

    Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. The Ensanut-MC is a national probabilistic survey whose objective population are the inhabitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on overweight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

  17. Guide to the design and application of online questionnaire surveys.

    Science.gov (United States)

    Regmi, Pramod R; Waithaka, Elizabeth; Paudyal, Anjana; Simkhada, Padam; van Teijlingen, Edwin

    2016-12-01

    Collecting research data through traditional approaches (face-to-face, postal or telephone survey) can be costly and time consuming. The emerging data collection approach based on internet/e-based technologies (e.g. online platforms and email), is a relatively cost effective survey alternative. These novel data collection strategies can collect large amounts of data from participants in a short time frame. Similarly, they also seem to be feasible and effective in collecting data on sensitive issues or with samples they are generally hard to reach, for example, men who have sex with men (MSM) or migrants. As a significant proportion of the population currently in the world are digitally connected, the shift from postal (paper-pencil) or telephone towards online survey use in research is in the interests of researchers in academia as well as in the commercial world. However, compared to designing and executing paper version of the questionnaire, there is limited literature to help a starting researcher with the design and a use of online questionnaires. This short paper highlights issues around: a) methodological aspect of online questionnaire survey; b) online survey planning and management; and c) ethical concerns that may arise while using this option. We believe that this paper will be useful for researchers who want to gain knowledge or apply this approach in their research.

  18. Justification of wife beating in rural Bangladesh: a qualitative analysis of gender differences in responses to survey questions.

    Science.gov (United States)

    Schuler, Sidney Ruth; Yount, Kathryn M; Lenzi, Rachel

    2012-10-01

    Understanding attitudes about intimate partner violence (IPV) in cultural context is important for developing interventions to reduce it or mitigate its effects. This article presents qualitative findings from research conducted in rural Bangladesh to understand men's and women's responses to attitudinal questions about IPV. Both men and women often responded as if the questions were about their personal behavior. A few women said that their opinion did not matter. Women's responses were more sensitive than men's to contextual nuances in the questions, and men more often than women described their own attitudes as consistent with community norms.

  19. Large Synoptic Survey Telescope: From Science Drivers to Reference Design

    Energy Technology Data Exchange (ETDEWEB)

    Ivezic, Z.; Axelrod, T.; Brandt, W.N.; Burke, D.L.; Claver, C.F.; Connolly, A.; Cook, K.H.; Gee, P.; Gilmore, D.K.; Jacoby, S.H.; Jones, R.L.; Kahn, S.M.; Kantor, J.P.; Krabbendam, V.; Lupton, R.H.; Monet, D.G.; Pinto, P.A.; Saha, A.; Schalk, T.L.; Schneider, D.P.; Strauss, Michael A.; /Washington U., Seattle, Astron. Dept. /LSST Corp. /Penn State U., Astron. Astrophys. /KIPAC, Menlo Park /NOAO, Tucson /LLNL, Livermore /UC, Davis /Princeton U., Astrophys. Sci. Dept. /Naval Observ., Flagstaff /Arizona U., Astron. Dept. - Steward Observ. /UC, Santa Cruz /Harvard U. /Johns Hopkins U. /Illinois U., Urbana

    2011-10-14

    In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST). LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg{sup 2} field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg{sup 2} with {delta} < +34.5{sup o}, and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg{sup 2} region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the

  20. Large Synoptic Survey Telescope: From science drivers to reference design

    Directory of Open Access Journals (Sweden)

    Ivezić Ž.

    2008-01-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next- generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective primary mirror, a 9.6 deg2 field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg2 with δ < +34.5◦ , and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep- wide-fast survey mode which will observe a 20,000 deg2 region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the LSST

  1. Large Synoptic Survey Telescope: From Science Drivers To Reference Design

    Directory of Open Access Journals (Sweden)

    Ivezić, Ž.

    2008-06-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pach'{o}n in Northern Chile. The current baseline design, with an 8.4, m (6.5, m effective primary mirror, a 9.6 deg$^2$ field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg$^2$ with $delta<+34.5^circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\\% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg$^2$ region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10\\% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We

  2. A SUCCESSFUL BROADBAND SURVEY FOR GIANT Lyα NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

    International Nuclear Information System (INIS)

    Prescott, Moire K. M.; Dey, Arjun; Jannuzi, Buell T.

    2012-01-01

    Giant Lyα nebulae (or Lyα 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Lyα nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Lyα nebulae at 2 ∼ 2 NOAO Deep Wide-Field Survey Boötes field. With a total survey comoving volume of ≈10 8 h –3 70 Mpc 3 , this is the largest volume survey for Lyα nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Lyα nebula.

  3. Some questions of material inelasticity and failure in the design of concrete structures for nuclear reactors

    International Nuclear Information System (INIS)

    Bazant, Z.P.

    1975-01-01

    Several aspects of inelasticity of concrete which are particularly important for the safety analysis and failure predictions of concrete pressure vessels and containments are analyzed. An entirely new type of constitutive law is developed and it is demonstrated that this stress-strain law correctly predicts uniaxial, biaxial and triaxial stress-strain diagrams and failure envelopes, shear-compression failure envelopes, unloading behavior, hysteresis loops, cyclic creep up to 10 6 cycles, as well as low stress static creep and decrease of strength with load duration. Furthermore, development of a mathematical model for coupled heat and moisture diffusion, based on irreversible thermodynamics, is outlined. Of particular concern for various postulated accidents is the phenomenon of explosive spalling, which is discussed as a consequence of both instability under compressive thermal stress and tensile failure induced by pore stream pressure. Further it is shown that even when the constitutive law is known, the finite element method as currently used does not reliably predict failure loads, because it cannot model unstable strain localization (due to cracking and drop in tangent modulus) and the inherent size effect in strength and ductility. A method of approximate treatment is suggested. For extrapolation of short-time creep data and prediction of 5% confidence limits for long-time creep, a stochastic model of creep is needed. A new approach in which creep is modeled as a two-dimensional random process in creep duration and age is outlined. Finally, the nonuniformity of shrinkage and creep throughout the thickness of a containment wall (neglected in current design practice) is shown to produce higher stresses than the sustained operating temperature gradient

  4. JUSTIFICATION OF WIFE BEATING IN RURAL BANGLADESH: A QUALITATIVE ANALYSIS OF GENDER DIFFERENCES IN RESPONSES TO SURVEY QUESTIONS

    OpenAIRE

    Schuler, Sidney Ruth; Yount, Kathryn M.; Lenzi, Rachel

    2012-01-01

    Understanding attitudes about intimate partner violence (IPV) in cultural context is important for developing interventions to reduce IPV and its effects. This paper presents qualitative findings from research conducted in rural Bangladesh to understand men’s and women’s responses to attitudinal questions about IPV. Both men and women often responded as if the questions were about their personal behavior. A few women said that their opinion did not matter. Women’s responses were more sensitiv...

  5. Spouses of Military Members' Experiences and Insights: Qualitative Analysis of Responses to an Open-Ended Question in a Survey of Health and Wellbeing

    Science.gov (United States)

    Runge, Catherine E.; Waller, Michael; MacKenzie, Alison; McGuire, Annabel C. L.

    2014-01-01

    Introduction There are few studies on the experiences of spouses of military members, with most focused on adverse impacts of deployment. Responses to an open-ended question in a survey of spouses' health and wellbeing enabled access to perceptions and insights on a broad range of topics. The objective of this investigation was to examine how respondents used the open-ended question and what they discussed, in aim of informing support service agencies and spouses of military members. Methods Thematic analysis was conducted on responses to the open-ended question. Descriptive analysis was performed on the demographics, military member characteristics and self-reported health of respondents and non-respondents to the open-ended question. Findings Over a quarter (28.5%) of the 1,332 survey participants answered the open-ended question, with respondents having a significantly higher level of education than non–respondents. Respondents expressed negative and positive experiences and insights on military life, provided personal information, commented on the survey, and qualified their responses to closed-ended questions. Topics included ‘inadequate support’, ‘deployment impacts’, ‘suggestions for supporting agencies’, ‘appraisal of experiences’ and ‘coping strategies’. Conclusions This investigation uncovered issues of importance to spouses of military members that were not included or identified in a quantitative study. The findings provide a platform from which to explore these issues further, particularly the impact of military life on the non-serving spouse's career. The findings also provide support agencies with evidence to strengthen their services and they give spouses an opportunity to reflect on their own and others' feelings and evaluations of military life. PMID:25479135

  6. The Army Communications Objectives Measurement System (ACOMS): Survey Design

    Science.gov (United States)

    1988-04-01

    tiveness, assessments of advertising strategy efficiencies, management of the advertising program, and planning and development of new marketing strategies... advertising strategy and market segmentation. The ACOMS development effort has focused on specifying the design and analysis plan for the survey...second set of goals involves the use of ACOMS data to assess the Army’s advertising strategy . ACOMS is examining the extent to which the Army’s in

  7. Survey of research on the optimal design of sea harbours

    Directory of Open Access Journals (Sweden)

    Hassan Diab

    2017-07-01

    Full Text Available The design of harbours, as with any other system design, must be an optimization process. In this study, a global examination of the different constraints in coastal engineering was performed and an optimization problem was defined. The problem has multiple objectives, and the criteria to be minimized are the structure cost and wave height disturbance inside a harbour. As concluded in this survey, the constraints are predefined parameters, mandatory constraints or optional constraints. All of these constraints are categorized into four categories: environmental, fluid mechanical, structural and manoeuvring.

  8. The Influence of the Design of Web Survey Questionnaires on the Quality of Responses

    Directory of Open Access Journals (Sweden)

    Stéphane Ganassali

    2008-03-01

    Full Text Available he first objective of this article is to propose a conceptual framework of the effects of on-line questionnaire design on the quality of collected responses. Secondly, we present the results of an experiment where different protocols have been tested and compared in a randomised design using the basis of several quality indexes. Starting from some previous categorizations, and from the main factors identified in the literature, we first propose an initial global framework of the questionnaire and question characteristics in a web survey, divided into five groups of factors. Our framework was built to follow the response process successive stages of the contact between the respondent and the questionnaire itself. Then, because it has been studied in the survey methodology literature in a very restricted way, the concept of `response quality' is discussed and extended with some more `qualitative' criteria that could be helpful for researchers and practitioners, in order to obtain a deeper assessment of the survey output. As an experiment, on the basis of the factors chosen as major characteristics of the questionnaire design, eight versions of a questionnaire related to young people's consumption patterns were created. The links to these on-line questionnaires were sent in November 2005 to a target of 10,000 young people. The article finally presents the results of our study and discusses the conclusions. Very interesting results come to light; especially regarding the influence of length, interaction and question wording dimensions on response quality. We discuss the effects of Web-questionnaire design characteristics on the quality of data.

  9. An Assessment of FY2016 Locally Developed Questions from the DEOMI Organizational Climate Survey: Recommendations and Potential Implications

    Science.gov (United States)

    2017-07-11

    management / leadership to handle complaints, problems, or issues seriously 3,232 1.8% 4 Interpersonal Relations/ Social Interactions My work environment...all Services, one question from the leadership effectiveness factor that was asked across all Services was: ‘I trust management / leadership to handle...Table 3. Breakdown by Service of ‘I trust management / leadership to handle complaints, problems, or issues seriously’ Military Service

  10. Design Considerations: Falcon M Dwarf Habitable Exoplanet Survey

    Science.gov (United States)

    Polsgrove, Daniel; Novotny, Steven; Della-Rose, Devin J.; Chun, Francis; Tippets, Roger; O'Shea, Patrick; Miller, Matthew

    2016-01-01

    The Falcon Telescope Network (FTN) is an assemblage of twelve automated 20-inch telescopes positioned around the globe, controlled from the Cadet Space Operations Center (CSOC) at the US Air Force Academy (USAFA) in Colorado Springs, Colorado. Five of the 12 sites are currently installed, with full operational capability expected by the end of 2016. Though optimized for studying near-earth objects to accomplish its primary mission of Space Situational Awareness (SSA), the Falcon telescopes are in many ways similar to those used by ongoing and planned exoplanet transit surveys targeting individual M dwarf stars (e.g., MEarth, APACHE, SPECULOOS). The network's worldwide geographic distribution provides additional potential advantages. We have performed analytical and empirical studies exploring the viability of employing the FTN for a future survey of nearby late-type M dwarfs tailored to detect transits of 1-2REarth exoplanets in habitable-zone orbits . We present empirical results on photometric precision derived from data collected with multiple Falcon telescopes on a set of nearby (survey design parameters is also described, including an analysis of site-specific weather data, anticipated telescope time allocation and the percentage of nearby M dwarfs with sufficient check stars within the Falcons' 11' x 11' field-of-view required to perform effective differential photometry. The results of this ongoing effort will inform the likelihood of discovering one (or more) habitable-zone exoplanets given current occurrence rate estimates over a nominal five-year campaign, and will dictate specific survey design features in preparation for initiating project execution when the FTN begins full-scale automated operations.

  11. Methodological design of the National Health and Nutrition Survey 2016

    Directory of Open Access Journals (Sweden)

    Martín Romero-Martínez

    2017-05-01

    Full Text Available Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. Results. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. Conclusions. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on over­weight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

  12. SEDS: THE SPITZER EXTENDED DEEP SURVEY. SURVEY DESIGN, PHOTOMETRY, AND DEEP IRAC SOURCE COUNTS

    International Nuclear Information System (INIS)

    Ashby, M. L. N.; Willner, S. P.; Fazio, G. G.; Huang, J.-S.; Hernquist, L.; Hora, J. L.; Arendt, R.; Barmby, P.; Barro, G.; Faber, S.; Guhathakurta, P.; Bell, E. F.; Bouwens, R.; Cattaneo, A.; Croton, D.; Davé, R.; Dunlop, J. S.; Egami, E.; Finlator, K.; Grogin, N. A.

    2013-01-01

    The Spitzer Extended Deep Survey (SEDS) is a very deep infrared survey within five well-known extragalactic science fields: the UKIDSS Ultra-Deep Survey, the Extended Chandra Deep Field South, COSMOS, the Hubble Deep Field North, and the Extended Groth Strip. SEDS covers a total area of 1.46 deg 2 to a depth of 26 AB mag (3σ) in both of the warm Infrared Array Camera (IRAC) bands at 3.6 and 4.5 μm. Because of its uniform depth of coverage in so many widely-separated fields, SEDS is subject to roughly 25% smaller errors due to cosmic variance than a single-field survey of the same size. SEDS was designed to detect and characterize galaxies from intermediate to high redshifts (z = 2-7) with a built-in means of assessing the impact of cosmic variance on the individual fields. Because the full SEDS depth was accumulated in at least three separate visits to each field, typically with six-month intervals between visits, SEDS also furnishes an opportunity to assess the infrared variability of faint objects. This paper describes the SEDS survey design, processing, and publicly-available data products. Deep IRAC counts for the more than 300,000 galaxies detected by SEDS are consistent with models based on known galaxy populations. Discrete IRAC sources contribute 5.6 ± 1.0 and 4.4 ± 0.8 nW m –2 sr –1 at 3.6 and 4.5 μm to the diffuse cosmic infrared background (CIB). IRAC sources cannot contribute more than half of the total CIB flux estimated from DIRBE data. Barring an unexpected error in the DIRBE flux estimates, half the CIB flux must therefore come from a diffuse component.

  13. Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

    Energy Technology Data Exchange (ETDEWEB)

    Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baumgartner, Robert [Tetra Tech, Madison, WI (United States)

    2017-10-05

    This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savings from energy efficiency programs.

  14. Probability sampling design in ethnobotanical surveys of medicinal plants

    Directory of Open Access Journals (Sweden)

    Mariano Martinez Espinosa

    2012-07-01

    Full Text Available Non-probability sampling design can be used in ethnobotanical surveys of medicinal plants. However, this method does not allow statistical inferences to be made from the data generated. The aim of this paper is to present a probability sampling design that is applicable in ethnobotanical studies of medicinal plants. The sampling design employed in the research titled "Ethnobotanical knowledge of medicinal plants used by traditional communities of Nossa Senhora Aparecida do Chumbo district (NSACD, Poconé, Mato Grosso, Brazil" was used as a case study. Probability sampling methods (simple random and stratified sampling were used in this study. In order to determine the sample size, the following data were considered: population size (N of 1179 families; confidence coefficient, 95%; sample error (d, 0.05; and a proportion (p, 0.5. The application of this sampling method resulted in a sample size (n of at least 290 families in the district. The present study concludes that probability sampling methods necessarily have to be employed in ethnobotanical studies of medicinal plants, particularly where statistical inferences have to be made using data obtained. This can be achieved by applying different existing probability sampling methods, or better still, a combination of such methods.

  15. Telemedicine for Developing Countries. A Survey and Some Design Issues.

    Science.gov (United States)

    Combi, Carlo; Pozzani, Gabriele; Pozzi, Giuseppe

    2016-11-02

    Developing countries need telemedicine applications that help in many situations, when physicians are a small number with respect to the population, when specialized physicians are not available, when patients and physicians in rural villages need assistance in the delivery of health care. Moreover, the requirements of telemedicine applications for developing countries are somewhat more demanding than for developed countries. Indeed, further social, organizational, and technical aspects need to be considered for successful telemedicine applications in developing countries. We consider all the major projects in telemedicine, devoted to developing countries, as described by the proper scientific literature. On the basis of such literature, we want to define a specific taxonomy that allows a proper classification and a fast overview of telemedicine projects in developing countries. Moreover, by considering both the literature and some recent direct experiences, we want to complete such overview by discussing some design issues to be taken into consideration when developing telemedicine software systems. We considered and reviewed the major conferences and journals in depth, and looked for reports on the telemedicine projects. We provide the reader with a survey of the main projects and systems, from which we derived a taxonomy of features of telemedicine systems for developing countries. We also propose and discuss some classification criteria for design issues, based on the lessons learned in this research area. We highlight some challenges and recommendations to be considered when designing a telemedicine system for developing countries.

  16. Four Questions

    Science.gov (United States)

    Hark-Weber, Amara G., Ed.

    2013-01-01

    The author is pleased to introduce a new section in "TAJ," Four Questions. The structure is simple: four questions are asked to teaching artists working in various media and locations. The questions are always the same, but because each teaching artist's approach is unique, their answers will provide an insight into particular methodologies that…

  17. Iranian mental health survey: design and field proced.

    Directory of Open Access Journals (Sweden)

    Afarin Rahimi-Movaghar

    2014-06-01

    Full Text Available Iranian Mental Health Survey (IranMHS was conducted to assess the twelve-month prevalence and severity of psychiatric disorders in the Iranian adult population and to determine the pattern of health care utilization and cost of services. IranMHS is a cross-sectional national household survey with face-to-face interviews as the main data collection method. The study was carried out between January and June 2011. A three-stage probability sampling was applied for the selection of a representative sample from the non-institutionalized population aged 15 to 64. The primary instrument utilized for assessing the prevalence of mental disorders was the Persian version of Composite International Diagnosis Interview, version 2.1. The instruments for assessing the service and cost of mental illness were developed by the research team. The response rate was 86.2%, and a total of 7886 individuals participated in the study. Sampling weights were the joint product of inverse probability of unit selection, non-response weights and post-stratification weights. This paper presents an overview of the study design, fieldwork organization and procedures, weightings and analysis. The strengths and limitations of the study are also discussed.

  18. A Mapping of Tools for Informing Water Sensitive Urban Design Planning Decisions—Questions, Aspects and Context Sensitivity

    Directory of Open Access Journals (Sweden)

    Sara Maria Lerer

    2015-03-01

    Full Text Available Water Sensitive Urban Design (WSUD poses new challenges for decision makers compared with traditional stormwater management, e.g., because WSUD offers a larger selection of measures and because many measures are multifunctional. These challenges have motivated the development of many decision support tools. This review shows that the tools differ in terms of the types of questions they can assist in answering. We identified three main groups: “How Much”-tools, “Where”-tools and “Which”-tools. The “How Much”-tools can further be grouped into tools quantifying hydraulic impacts, hydrologic impacts, water quality impacts, non-flow-related impacts and economic impacts. Additionally, the tools differ in terms of how many aspects of water they address, from those focused only on bio-physical aspects to those attempting to find the best WSUD based on multiple criteria. Finally, we suggest that variability among the tools can partly be explained by variability in local context including conditions such as type of existing stormwater systems, groundwater conditions and legislative frameworks.

  19. Responsive survey design, demographic data collection, and models of demographic behavior.

    Science.gov (United States)

    Axinn, William G; Link, Cynthia F; Groves, Robert M

    2011-08-01

    To address declining response rates and rising data-collection costs, survey methodologists have devised new techniques for using process data ("paradata") to address nonresponse by altering the survey design dynamically during data collection. We investigate the substantive consequences of responsive survey design-tools that use paradata to improve the representative qualities of surveys and control costs. By improving representation of reluctant respondents, responsive design can change our understanding of the topic being studied. Using the National Survey of Family Growth Cycle 6, we illustrate how responsive survey design can shape both demographic estimates and models of demographic behaviors based on survey data. By juxtaposing measures from regular and responsive data collection phases, we document how special efforts to interview reluctant respondents may affect demographic estimates. Results demonstrate the potential of responsive survey design to change the quality of demographic research based on survey data.

  20. Induced Polarization Surveying for Acid Rock Screening in Highway Design

    Science.gov (United States)

    Butler, K. E.; Al, T.; Bishop, T.

    2004-05-01

    Highway and pipeline construction agencies have become increasingly vigilant in their efforts to avoid cutting through sulphide-bearing bedrock that has potential to produce acid rock drainage. Blasting and fragmentation of such rock increases the surface area available for sulphide oxidation and hence increases the risk of acid rock drainage unless the rock contains enough natural buffering capacity to neutralize the pH. In December, 2001, the New Brunswick Department of Transportation (NBOT) sponsored a field trial of geophysical surveying in order to assess its suitability as a screening tool for locating near-surface sulphides along proposed highway alignments. The goal was to develop a protocol that would allow existing programs of drilling and geochemical testing to be targeted more effectively, and provide design engineers with the information needed to reduce rock cuts where necessary and dispose of blasted material in a responsible fashion. Induced polarization (IP) was chosen as the primary geophysical method given its ability to detect low-grade disseminated mineralization. The survey was conducted in dipole-dipole mode using an exploration-style time domain IP system, dipoles 8 to 25 m in length, and six potential dipoles for each current dipole location (i.e. n = 1 - 6). Supplementary information was provided by resistivity and VLF-EM surveys sensitive to lateral changes in electrical conductivity, and by magnetic field surveying chosen for its sensitivity to the magnetic susceptibility of pyrrhotite. Geological and geochemical analyses of samples taken from several IP anomalies located along 4.3 line-km of proposed highway confirmed the effectiveness of the screening technique. IP pseudosections from a region of metamorphosed shales and volcaniclastic rocks identified discrete, well-defined mineralized zones. Stronger, overlapping, and more laterally extensive IP anomalies were observed over a section of graphitic and sulphide-bearing metasedimentary

  1. Designing Your Community-Based Learning Project: Five Questions To Ask about Your Pedagogical and Participatory Goals.

    Science.gov (United States)

    Carter, Marion; Cadge, Wendy; Rivero, Estela; Curran, Sara

    2002-01-01

    Presents a set of five questions to be considered in the preliminary planning of a community-based learning (CBL) project. Discusses each question and outlines advantages and disadvantages of decisions, focusing on competing interests of students, instructors, and partner organizations. (Author/KDR)

  2. Current State of Agile User-Centered Design: A Survey

    Science.gov (United States)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

  3. Design and methodology of a mixed methods follow-up study to the 2014 Ghana Demographic and Health Survey.

    Science.gov (United States)

    Staveteig, Sarah; Aryeetey, Richmond; Anie-Ansah, Michael; Ahiadeke, Clement; Ortiz, Ladys

    2017-01-01

    The intended meaning behind responses to standard questions posed in large-scale health surveys are not always well understood. Systematic follow-up studies, particularly those which pose a few repeated questions followed by open-ended discussions, are well positioned to gauge stability and consistency of data and to shed light on the intended meaning behind survey responses. Such follow-up studies require extensive coordination and face challenges in protecting respondent confidentiality during the process of recontacting and reinterviewing participants. We describe practical field strategies for undertaking a mixed methods follow-up study during a large-scale health survey. The study was designed as a mixed methods follow-up study embedded within the 2014 Ghana Demographic and Health Survey (GDHS). The study was implemented in 13 clusters. Android tablets were used to import reference data from the parent survey and to administer the questionnaire, which asked a mixture of closed- and open-ended questions on reproductive intentions, decision-making, and family planning. Despite a number of obstacles related to recontacting respondents and concern about respondent fatigue, over 92 percent of the selected sub-sample were successfully recontacted and reinterviewed; all consented to audio recording. A confidential linkage between GDHS data, follow-up tablet data, and audio transcripts was successfully created for the purpose of analysis. We summarize the challenges in follow-up study design, including ethical considerations, sample size, auditing, filtering, successful use of tablets, and share lessons learned for future such follow-up surveys.

  4. Question order sensitivity of subjective well-being measures: focus on life satisfaction, self-rated health, and subjective life expectancy in survey instruments.

    Science.gov (United States)

    Lee, Sunghee; McClain, Colleen; Webster, Noah; Han, Saram

    2016-10-01

    This study examines the effect of question context created by order in questionnaires on three subjective well-being measures: life satisfaction, self-rated health, and subjective life expectancy. We conducted two Web survey experiments. The first experiment (n = 648) altered the order of life satisfaction and self-rated health: (1) life satisfaction asked immediately after self-rated health; (2) self-rated health immediately after life satisfaction; and (3) two items placed apart. We examined their correlation coefficient by experimental condition and further examined its interaction with objective health. The second experiment (n = 479) asked life expectancy before and after parental mortality questions. Responses to life expectancy were compared by order using ANOVA, and we examined interaction with parental mortality status using ANCOVA. Additionally, response time and probes were examined. Correlation coefficients between self-rated health and life satisfaction differed significantly by order: 0.313 (life satisfaction first), 0.508 (apart), and 0.643 (self-rated health first). Differences were larger among respondents with chronic conditions. Response times were the shortest when self-rated health was asked first. When life expectancy asked after parental mortality questions, respondents reported considering parents more for answering life expectancy; and respondents with deceased parents reported significantly lower expectancy, but not those whose parents were alive. Question context effects exist. Findings suggest placing life satisfaction and self-rated health apart to avoid artificial attenuation or inflation in their association. Asking about parental mortality prior to life expectancy appears advantageous as this leads respondents to consider parental longevity more, an important factor for true longevity.

  5. Musculoskeletal impairment survey in Rwanda: Design of survey tool, survey methodology, and results of the pilot study (a cross sectional survey

    Directory of Open Access Journals (Sweden)

    Simms Victoria

    2007-03-01

    Full Text Available Abstract Background Musculoskeletal impairment (MSI is an important cause of morbidity and mortality worldwide, especially in developing countries. Prevalence studies for MSI in the developing world have used varying methodologies and are seldom directly comparable. This study aimed to develop a new tool to screen for and diagnose MSI and to pilot test the methodology for a national survey in Rwanda. Methods A 7 question screening tool to identify cases of MSI was developed through literature review and discussions with healthcare professionals. To validate the tool, trained rehabilitation technicians screened 93 previously identified gold standard 'cases' and 86 'non cases'. Sensitivity, specificity and positive predictive value were calculated. A standardised examination protocol was developed to determine the aetiology and diagnosis of MSI for those who fail the screening test. For the national survey in Rwanda, multistage cluster random sampling, with probability proportional to size procedures will be used for selection of a cross-sectional, nationally representative sample of the population. Households to be surveyed will be chosen through compact segment sampling and all individuals within chosen households will be screened. A pilot survey of 680 individuals was conducted using the protocol. Results: The screening tool demonstrated 99% sensitivity and 97% specificity for MSI, and a positive predictive value of 98%. During the pilot study 468 out of 680 eligible subjects (69% were screened. 45 diagnoses were identified in 38 persons who were cases of MSI. The subjects were grouped into categories based on diagnostic subgroups of congenital (1, traumatic (17, infective (2 neurological (6 and other acquired(19. They were also separated into mild (42.1%, moderate (42.1% and severe (15.8% cases, using an operational definition derived from the World Health Organisation's International Classification of Functioning, Disability and Health

  6. Curiosity Questions

    Science.gov (United States)

    Nelsen, Jane; DeLorenzo, Chip

    2010-01-01

    Have you ever found yourself lecturing a child, with the best of intentions, in an attempt to help him or her learn a lesson or process a situation in a manner that you feel will be productive? Curiosity questions, which the authors also call What and How questions, help children process an experience, event, or natural consequence so that they…

  7. Nuclear questions

    International Nuclear Information System (INIS)

    Berg, Eugene

    2012-01-01

    Civilian and military nuclear questions fill a multitude of publications these days, especially after the Japanese tsunami and the Fukushima disaster. The author analyses some of them and highlights the links between civil and military nuclear industries, the realities of the nuclear cycle and related industrial questions before concluding on the controversial issue of weapons and their proliferation potential

  8. Student Engagement with a Flipped Classroom Teaching Design Affects Pharmacology Examination Performance in a Manner Dependent on Question Type

    Science.gov (United States)

    Naidu, Som; Yuriev, Elizabeth; Short, Jennifer L.; McLaughlin, Jacqueline E.; Larson, Ian C.

    2017-01-01

    Objective: To investigate the relationship between student engagement with the key elements of a flipped classroom approach (preparation and attendance), their attitudes to learning, including strategy development, and their performance on two types of examination questions (knowledge recall and providing rational predictions when faced with novel scenarios). Methods. This study correlated student engagement with the flipped classroom and student disposition to learning with student ability to solve novel scenarios in examinations. Results. Students who both prepared for and attended classes performed significantly better on examination questions that required analysis of novel scenarios compared to students who did not prepare and missed classes. However, there was no difference for both groups of students on examination questions that required knowledge and comprehension. Student motivation and use of strategies correlated with higher examination scores on questions requiring novel scenario analysis. Conclusion. There is a synergistic relationship between class preparation and attendance. The combination of preparation and attendance was positively correlated to assessment type; the relationship was apparent for questions requiring students to solve novel problems but not for questions requiring knowledge or comprehension. PMID:29302082

  9. Student Engagement with a Flipped Classroom Teaching Design Affects Pharmacology Examination Performance in a Manner Dependent on Question Type.

    Science.gov (United States)

    White, Paul J; Naidu, Som; Yuriev, Elizabeth; Short, Jennifer L; McLaughlin, Jacqueline E; Larson, Ian C

    2017-11-01

    Objective: To investigate the relationship between student engagement with the key elements of a flipped classroom approach (preparation and attendance), their attitudes to learning, including strategy development, and their performance on two types of examination questions (knowledge recall and providing rational predictions when faced with novel scenarios). Methods. This study correlated student engagement with the flipped classroom and student disposition to learning with student ability to solve novel scenarios in examinations. Results. Students who both prepared for and attended classes performed significantly better on examination questions that required analysis of novel scenarios compared to students who did not prepare and missed classes. However, there was no difference for both groups of students on examination questions that required knowledge and comprehension. Student motivation and use of strategies correlated with higher examination scores on questions requiring novel scenario analysis. Conclusion. There is a synergistic relationship between class preparation and attendance. The combination of preparation and attendance was positively correlated to assessment type; the relationship was apparent for questions requiring students to solve novel problems but not for questions requiring knowledge or comprehension.

  10. Design and evaluation of representative indoor radon surveys

    International Nuclear Information System (INIS)

    Csige, I.; Csegzi, S.

    2004-01-01

    We have developed a procedure to design and evaluate representative indoor radon surveys. The procedure is based on random sampling of a population of houses and careful statistical analysis of measured indoor radon concentrations. The method is designed to estimate the fraction of houses in which annual average 222 Rn activity concentration may exceed a certain reference level. Measurements of annual average indoor 222 Rn activity concentration were done in sleeping rooms at pillow level using etched track type radon detectors. We applied the above procedure in an old fashioned village and in a fast developing small city in Transylvania, Romania. In the village almost all houses were single floor wooden made houses without cellar built with traditional technology on a geologically uniform area. The distribution of indoor 222 Rn activity concentration in a sample of 115 houses can almost perfectly be fitted with log-normal probability density function. The correlation coefficient of linear fitting on linearized scales was k = -0.9980. The percentages of houses expected to have annual average 222 Rn activity concentration higher than 400 Bq m -3 is less than 1 %, and of those higher than 600 Bq m -3 can be estimated to be around 0.1 %. The small city, on the other hand lies on a geologically inhomogeneous area, and house construction technology has also changed dramatically in past decades. The resulting distribution of measured indoor 222 Rn activity concentration in a sample of 116 houses cannot be fitted with any simple probability density function. Therefore the prediction of the fraction of houses in which the annual average 222 Rn activity concentration may exceed a certain reference level could not be done adequately. With certain assumptions we estimated that the percentages of houses expected to have annual average 222 Rn activity concentration higher than 400 Bq m -3 is between 3 and 7 %, and of those higher than 600 Bq m -3 can be estimated to be between

  11. Trajectory Design for the Transiting Exoplanet Survey Satellite (TESS)

    Science.gov (United States)

    Dichmann, Donald J.; Parker, Joel; Williams, Trevor; Mendelsohn, Chad

    2014-01-01

    The Transiting Exoplanet Survey Satellite (TESS) is a National Aeronautics and Space Administration (NASA) mission launching in 2017. TESS will travel in a highly eccentric orbit around Earth, with initial perigee radius near 17 Earth radii (Re) and apogee radius near 59 Re. The orbit period is near 2:1 resonance with the Moon, with apogee nearly 90 degrees out-of-phase with the Moon, in a configuration that has been shown to be operationally stable. TESS will execute phasing loops followed by a lunar flyby, with a final maneuver to achieve 2:1 resonance with the Moon. The goals of a resonant orbit with long-term stability, short eclipses and limited oscillations of perigee present significant challenges to the trajectory design. To rapidly assess launch opportunities, we adapted the SWM76 launch window tool to assess the TESS mission constraints. To understand the long-term dynamics of such a resonant orbit in the Earth-Moon system we employed Dynamical Systems Theory in the Circular Restricted 3-Body Problem (CR3BP). For precise trajectory analysis we use a high-fidelity model and multiple shooting in the General Mission Analysis Tool (GMAT) to optimize the maneuver delta-V and meet mission constraints. Finally we describe how the techniques we have developed can be applied to missions with similar requirements.

  12. Legacy question

    International Nuclear Information System (INIS)

    Healy, J.W.

    1977-01-01

    The legacy question discussed refers to the definition of appropriate actions in this generation to provide a world that will allow future generations to use the earth without excessive limitations caused by our use and disposal of potentially hazardous materials

  13. Sport Management Survey. Employment Perspectives.

    Science.gov (United States)

    Quain, Richard J.; Parks, Janet B.

    1986-01-01

    A survey of sport management positions was designed to determine projected vacancy rates in six sport management career areas. Respondents to the survey were also questioned regarding their awareness of college professional preparation programs. Results are presented. (MT)

  14. Scholar-Craftsmanship: Question-Type, Epistemology, Culture of Inquiry, and Personality-Type in Dissertation Research Design

    Science.gov (United States)

    Werner, Thomas P.; Rogers, Katrina S.

    2013-01-01

    "Scholar-Craftsmanship" (SC) is a quadrant methodological framework created to help social science doctoral students construct first-time dissertation research. The framework brackets and predicts how epistemological domains, cultures of inquiries, personality indicators, and research question--types can be correlated in dissertation…

  15. A Comparison of the Cheater Detection and the Unrelated Question Models: A Randomized Response Survey on Physical and Cognitive Doping in Recreational Triathletes

    Science.gov (United States)

    Schröter, Hannes; Studzinski, Beatrix; Dietz, Pavel; Ulrich, Rolf; Striegel, Heiko; Simon, Perikles

    2016-01-01

    Purpose This study assessed the prevalence of physical and cognitive doping in recreational triathletes with two different randomized response models, that is, the Cheater Detection Model (CDM) and the Unrelated Question Model (UQM). Since both models have been employed in assessing doping, the major objective of this study was to investigate whether the estimates of these two models converge. Material and Methods An anonymous questionnaire was distributed to 2,967 athletes at two triathlon events (Frankfurt and Wiesbaden, Germany). Doping behavior was assessed either with the CDM (Frankfurt sample, one Wiesbaden subsample) or the UQM (one Wiesbaden subsample). A generalized likelihood-ratio test was employed to check whether the prevalence estimates differed significantly between models. In addition, we compared the prevalence rates of the present survey with those of a previous study on a comparable sample. Results After exclusion of incomplete questionnaires and outliers, the data of 2,017 athletes entered the final data analysis. Twelve-month prevalence for physical doping ranged from 4% (Wiesbaden, CDM and UQM) to 12% (Frankfurt CDM), and for cognitive doping from 1% (Wiesbaden, CDM) to 9% (Frankfurt CDM). The generalized likelihood-ratio test indicated no differences in prevalence rates between the two methods. Furthermore, there were no significant differences in prevalences between the present (undertaken in 2014) and the previous survey (undertaken in 2011), although the estimates tended to be smaller in the present survey. Discussion The results suggest that the two models can provide converging prevalence estimates. The high rate of cheaters estimated by the CDM, however, suggests that the present results must be seen as a lower bound and that the true prevalence of doping might be considerably higher. PMID:27218830

  16. A Novel Simulation Technician Laboratory Design: Results of a Survey-Based Study.

    Science.gov (United States)

    Ahmed, Rami; Hughes, Patrick G; Friedl, Ed; Ortiz Figueroa, Fabiana; Cepeda Brito, Jose R; Frey, Jennifer; Birmingham, Lauren E; Atkinson, Steven Scott

    2016-03-16

    OBJECTIVE : The purpose of this study was to elicit feedback from simulation technicians prior to developing the first simulation technician-specific simulation laboratory in Akron, OH. Simulation technicians serve a vital role in simulation centers within hospitals/health centers around the world. The first simulation technician degree program in the US has been approved in Akron, OH. To satisfy the requirements of this program and to meet the needs of this special audience of learners, a customized simulation lab is essential. A web-based survey was circulated to simulation technicians prior to completion of the lab for the new program. The survey consisted of questions aimed at identifying structural and functional design elements of a novel simulation center for the training of simulation technicians. Quantitative methods were utilized to analyze data. Over 90% of technicians (n=65) think that a lab designed explicitly for the training of technicians is novel and beneficial. Approximately 75% of respondents think that the space provided appropriate audiovisual (AV) infrastructure and space to evaluate the ability of technicians to be independent. The respondents think that the lab needed more storage space, visualization space for a large number of students, and more space in the technical/repair area. CONCLUSIONS : A space designed for the training of simulation technicians was considered to be beneficial. This laboratory requires distinct space for technical repair, adequate bench space for the maintenance and repair of simulators, an appropriate AV infrastructure, and space to evaluate the ability of technicians to be independent.

  17. Utilizing the Total Design Method in medicine: maximizing response rates in long, non-incentivized, personal questionnaire postal surveys.

    Science.gov (United States)

    Kazzazi, Fawz; Haggie, Rebecca; Forouhi, Parto; Kazzazi, Nazar; Malata, Charles M

    2018-01-01

    Maximizing response rates in questionnaires can improve their validity and quality by reducing non-response bias. A comprehensive analysis is essential for producing reasonable conclusions in patient-reported outcome research particularly for topics of a sensitive nature. This often makes long (≥7 pages) questionnaires necessary but these have been shown to reduce response rates in mail surveys. Our work adapted the "Total Design Method," initially produced for commercial markets, to raise response rates in a long (total: 11 pages, 116 questions), non-incentivized, very personal postal survey sent to almost 350 women. A total of 346 women who had undergone mastectomy and immediate breast reconstruction from 2008-2014 (inclusive) at Addenbrooke's University Hospital were sent our study pack (Breast-Q satisfaction questionnaire and support documents) using our modified "Total Design Method." Participants were sent packs and reminders according to our designed schedule. Of the 346 participants, we received 258 responses, an overall response rate of 74.5% with a useable response rate of 72.3%. One hundred and six responses were received before the week 1 reminder (30.6%), 120 before week 3 (34.6%), 225 before the week 7 reminder (64.6%) and the remainder within 3 weeks of the final pack being sent. The median age of patients that the survey was sent to, and the median age of the respondents, was 54 years. In this study, we have demonstrated the successful implementation of a novel approach to postal surveys. Despite the length of the questionnaire (nine pages, 116 questions) and limitations of expenses to mail a survey to ~350 women, we were able to attain a response rate of 74.6%.

  18. Designing and conducting health surveys: a comprehensive guide

    National Research Council Canada - National Science Library

    Aday, Lu Ann; Cornelius, Llewellyn Joseph

    2006-01-01

    ... and Carrying Out the Survey 311 14 Preparing the Data for Analysis 340 15 Planning and Implementing the Analysis of the Data 360 16 Writing the Research Report 391 Resource A: Personal Interview Sur...

  19. Informed Design of Mixed-Mode Surveys : Evaluating mode effects on measurement and selection error

    NARCIS (Netherlands)

    Klausch, Thomas|info:eu-repo/dai/nl/341427306

    2014-01-01

    “Mixed-mode designs” are innovative types of surveys which combine more than one mode of administration in the same project, such as surveys administered partly on the web (online), on paper, by telephone, or face-to-face. Mixed-mode designs have become increasingly popular in international survey

  20. Internet, Phone, Mail, and Mixed-Mode Surveys: The Tailored Design Method, 4th Edition

    Science.gov (United States)

    Dillman, Don A.; Smyth, Jolene D.; Christian, Lean Melani

    2014-01-01

    For over two decades, Dillman's classic text on survey design has aided both students and professionals in effectively planning and conducting mail, telephone, and, more recently, Internet surveys. The new edition is thoroughly updated and revised, and covers all aspects of survey research. It features expanded coverage of mobile phones, tablets,…

  1. A survey of diagnostic ultrasound within the physiotherapy profession for the design of future training tools

    International Nuclear Information System (INIS)

    McKiernan, Sharmaine; Chiarelli, Pauline; Warren-Forward, Helen

    2011-01-01

    The expansion of diagnostic ultrasound outside of the traditional radiology profession into the physiotherapy profession is occurring. The purpose of this study was to determine if physiotherapists are purchasing diagnostic ultrasound machines, receiving training in the modality and what imaging procedures they are performing. For the design of future training tools, also investigated were the methods of training that physiotherapists might find most beneficial and what content they deem necessary to be covered during such training for the use of diagnostic ultrasound for their profession. An e-mail invitation was sent to physiotherapists throughout Australian who were registered on two databases, asking them to complete a web based survey. The survey was comprised of 18 questions including open and closed items. The data was then categorised into themes in accordance with the purpose of the study. Of the respondents, 39% did not own a diagnostic ultrasound machine, 33% had access to a machine that was owned by their employer and 18% actually owned a machine themselves. Training in diagnostic ultrasound had been received by 61% of the respondents however for 67% of those who had been trained, this training had only lasted for several hours, not days or weeks. For future training in ultrasound the majority of respondents would prefer either a workshop or DVD to cover imaging anatomy, the use of machine controls and scanning the pelvic floor, abdominal muscles and shoulder. From this survey it can be concluded that physiotherapists have an interest in or are using diagnostic ultrasound in their practice. While some form of training is being provided, further training is considered necessary and wanted by the physiotherapists so training tools need to be developed.

  2. A survey of diagnostic ultrasound within the physiotherapy profession for the design of future training tools

    Energy Technology Data Exchange (ETDEWEB)

    McKiernan, Sharmaine, E-mail: sharmaine.mckiernan@newcastle.edu.a [School of Health Sciences, University of Newcastle, Callaghan, NSW (Australia); Chiarelli, Pauline; Warren-Forward, Helen [School of Health Sciences, University of Newcastle, Callaghan, NSW (Australia)

    2011-05-15

    The expansion of diagnostic ultrasound outside of the traditional radiology profession into the physiotherapy profession is occurring. The purpose of this study was to determine if physiotherapists are purchasing diagnostic ultrasound machines, receiving training in the modality and what imaging procedures they are performing. For the design of future training tools, also investigated were the methods of training that physiotherapists might find most beneficial and what content they deem necessary to be covered during such training for the use of diagnostic ultrasound for their profession. An e-mail invitation was sent to physiotherapists throughout Australian who were registered on two databases, asking them to complete a web based survey. The survey was comprised of 18 questions including open and closed items. The data was then categorised into themes in accordance with the purpose of the study. Of the respondents, 39% did not own a diagnostic ultrasound machine, 33% had access to a machine that was owned by their employer and 18% actually owned a machine themselves. Training in diagnostic ultrasound had been received by 61% of the respondents however for 67% of those who had been trained, this training had only lasted for several hours, not days or weeks. For future training in ultrasound the majority of respondents would prefer either a workshop or DVD to cover imaging anatomy, the use of machine controls and scanning the pelvic floor, abdominal muscles and shoulder. From this survey it can be concluded that physiotherapists have an interest in or are using diagnostic ultrasound in their practice. While some form of training is being provided, further training is considered necessary and wanted by the physiotherapists so training tools need to be developed.

  3. A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

    Science.gov (United States)

    Glyer-Culver, Betty

    In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

  4. Ergonomic Based Design and Survey of Elementary School Furniture

    Science.gov (United States)

    Maheshwar; Jawalkar, Chandrashekhar S.

    2014-01-01

    This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

  5. A nationwide population-based cross-sectional survey of health-related quality of life in patients with myeloproliferative neoplasms in Denmark (MPNhealthSurvey: survey design and characteristics of respondents and nonrespondents

    Directory of Open Access Journals (Sweden)

    Brochmann N

    2017-03-01

    Full Text Available Nana Brochmann,1 Esben Meulengracht Flachs,2 Anne Illemann Christensen,3 Christen Lykkegaard Andersen,1 Knud Juel,3 Hans Carl Hasselbalch,1 Ann-Dorthe Zwisler4 1Department of Hematology, Zealand University Hospital, University of Copenhagen, Roskilde, 2Department of Occupational and Environmental Medicine, Bispebjerg University Hospital, Copenhagen, 3National Institute of Public Health, University of Southern Denmark, Copenhagen, 4Danish Knowledge Centre for Rehabilitation and Palliative Care, University of Southern Denmark and Odense University Hospital, Odense, Denmark Objective: The Department of Hematology, Zealand University Hospital, Denmark, and the National Institute of Public Health, University of Southern Denmark, created the first nationwide, population-based, and the most comprehensive cross-sectional health-related quality of life (HRQoL survey of patients with myeloproliferative neoplasms (MPNs. In Denmark, all MPN patients are treated in public hospitals and treatments received are free of charge for these patients. Therefore, MPN patients receive the best available treatment to the extent of its suitability for them and if they wish to receive the treatment. The aims of this article are to describe the survey design and the characteristics of respondents and nonrespondents. Material and methods: Individuals with MPN diagnoses registered in the Danish National Patient Register (NPR were invited to participate. The registers of the Danish Civil Registration System and Statistics Denmark provided information regarding demographics. The survey contained 120 questions: validated patient-reported outcome (PRO questionnaires and additional questions addressing lifestyle. Results: A total of 4,704 individuals were registered with MPN diagnoses in the NPR of whom 4,236 were eligible for participation and 2,613 (62% responded. Overall, the respondents covered the broad spectrum of MPN patients, but patients 70–79 years old, living with

  6. Thousand Questions

    DEFF Research Database (Denmark)

    2012-01-01

    (perhaps as an expanded Turing test) on its listeners. These questions are extracted in real-time from Twitter with the keyword search of the ‘?’ symbol to create a spatio-temporal experience. The computerized voice the audience hears is a collective one, an entanglement of humans and non-humans......In this work the network asks “If I wrote you a love letter would you write back?” Like the love letters which appeared mysteriously on the noticeboards of Manchester University’s Computer Department in the 1950s, thousands of texts circulate as computational processes perform the questions......, that circulates across networks. If I wrote you a love letter would you write back? (and thousands of other questions’ ) (封不回的情書?千言萬語無人回 was commissioned by the Microwave International New Media Festival 2012....

  7. Traveling questions

    DEFF Research Database (Denmark)

    Hoeyer, Klaus

    2016-01-01

    In this paper, I argue that uncertainty and nonknowledge, and not just research results, can be important vehicles of translation through which genetic research participation comes to affect the lives of research participants. Based on interviews with participants in a genetic research project, I....... Research questions, and not just results, may serve as a generative form of knowledge that can travel as fast as any answer....

  8. Single-Phase Mail Survey Design for Rare Population Subgroups

    Science.gov (United States)

    Brick, J. Michael; Andrews, William R.; Mathiowetz, Nancy A.

    2016-01-01

    Although using random digit dialing (RDD) telephone samples was the preferred method for conducting surveys of households for many years, declining response and coverage rates have led researchers to explore alternative approaches. The use of address-based sampling (ABS) has been examined for sampling the general population and subgroups, most…

  9. The influence of question design on the response to self-assessment in www.elearnSCI.org: a submodule pilot study.

    Science.gov (United States)

    Liu, N; Li, X-W; Zhou, M-W; Biering-Sørensen, F

    2015-08-01

    This is an interventional training session. The objective of this study was to investigate the difference in response to self-assessment questions in the original and an adjusted version for a submodule of www.elearnSCI.org for student nurses. The study was conducted in a teaching hospital affiliated to Peking University, China. In all, 28 student nurses divided into two groups (groups A and B; 14 in each) received a print-out of a Chinese translation of the slides from the 'Maintaining skin integrity following spinal cord injury' submodule in www.elearnSCI.org for self-study. Both groups were then tested using the 10 self-assessment multiple-choice questions (MCQs) related to the same submodule. Group A used the original questions, whereas group B received an adjusted questionnaire. The responses to four conventional single-answer MCQs were nearly all correct in both groups. However, in three questions, group A, with the option 'All of the above', had a higher number of correct answers than group B, with multiple-answer MCQs. In addition, in another three questions, group A, using the original multiple-answer MCQs, had fewer correct answers than group B, where it was only necessary to tick a single incorrect answer. Variations in design influence the response to questions. The use of conventional single-answer MCQs should be reconsidered, as they only examine the recall of isolated knowledge facts. The 'All of the above' option should be avoided because it would increase the number of correct answers arrived at by guessing. When using multiple-answer MCQs, it is recommended that the questions asked should be in accordance with the content within the www.elearnSCI.org.

  10. Joint NRC/EPA Sewage Sludge Radiological Survey: Survey Design & Test Site Results

    Science.gov (United States)

    This report contains the results of a radiological survey of nine publicly POTWs around the country, which was commissioned by the Sewage Sludge Subcommittee, to determine whether and to what extent radionuclides concentrate in sewage treatment wastes.

  11. A survey of snake-inspired robot designs

    International Nuclear Information System (INIS)

    Hopkins, James K; Spranklin, Brent W; Gupta, Satyandra K

    2009-01-01

    Body undulation used by snakes and the physical architecture of a snake body may offer significant benefits over typical legged or wheeled locomotion designs in certain types of scenarios. A large number of research groups have developed snake-inspired robots to exploit these benefits. The purpose of this review is to report different types of snake-inspired robot designs and categorize them based on their main characteristics. For each category, we discuss their relative advantages and disadvantages. This review will assist in familiarizing a newcomer to the field with the existing designs and their distinguishing features. We hope that by studying existing robots, future designers will be able to create new designs by adopting features from successful robots. The review also summarizes the design challenges associated with the further advancement of the field and deploying snake-inspired robots in practice. (topical review)

  12. Survey of editors and reviewers of high-impact psychology journals: statistical and research design problems in submitted manuscripts.

    Science.gov (United States)

    Harris, Alex; Reeder, Rachelle; Hyun, Jenny

    2011-01-01

    The authors surveyed 21 editors and reviewers from major psychology journals to identify and describe the statistical and design errors they encounter most often and to get their advice regarding prevention of these problems. Content analysis of the text responses revealed themes in 3 major areas: (a) problems with research design and reporting (e.g., lack of an a priori power analysis, lack of congruence between research questions and study design/analysis, failure to adequately describe statistical procedures); (b) inappropriate data analysis (e.g., improper use of analysis of variance, too many statistical tests without adjustments, inadequate strategy for addressing missing data); and (c) misinterpretation of results. If researchers attended to these common methodological and analytic issues, the scientific quality of manuscripts submitted to high-impact psychology journals might be significantly improved.

  13. A question of trust: user-centered design requirements for an informatics intervention to promote the sexual health of African-American youth.

    Science.gov (United States)

    Veinot, Tiffany C; Campbell, Terrance R; Kruger, Daniel J; Grodzinski, Alison

    2013-01-01

    We investigated the user requirements of African-American youth (aged 14-24 years) to inform the design of a culturally appropriate, network-based informatics intervention for the prevention of HIV and other sexually transmitted infections (STI). We conducted 10 focus groups with 75 African-American youth from a city with high HIV/STI prevalence. Data analyses involved coding using qualitative content analysis procedures and memo writing. Unexpectedly, the majority of participants' design recommendations concerned trust. Youth expressed distrust towards people and groups, which was amplified within the context of information technology-mediated interactions about HIV/STI. Participants expressed distrust in the reliability of condoms and the accuracy of HIV tests. They questioned the benevolence of many institutions, and some rejected authoritative HIV/STI information. Therefore, reputational information, including rumor, influenced HIV/STI-related decision making. Participants' design requirements also focused on trust-related concerns. Accordingly, we developed a novel trust-centered design framework to guide intervention design. Current approaches to online trust for health informatics do not consider group-level trusting patterns. Yet, trust was the central intervention-relevant issue among African-American youth, suggesting an important focus for culturally informed design. Our design framework incorporates: intervention objectives (eg, network embeddedness, participation); functional specifications (eg, decision support, collective action, credible question and answer services); and interaction design (eg, member control, offline network linkages, optional anonymity). Trust is a critical focus for HIV/STI informatics interventions for young African Americans. Our design framework offers practical, culturally relevant, and systematic guidance to designers to reach this underserved group better.

  14. A survey of bio-inspired compliant legged robot designs

    International Nuclear Information System (INIS)

    Zhou Xiaodong; Bi Shusheng

    2012-01-01

    The roles of biological springs in vertebrate animals and their implementations in compliant legged robots offer significant advantages over the rigid legged ones in certain types of scenarios. A large number of robotics institutes have been attempting to work in conjunction with biologists and incorporated these principles into the design of biologically inspired robots. The motivation of this review is to investigate the most published compliant legged robots and categorize them according to the types of compliant elements adopted in their mechanical structures. Based on the typical robots investigated, the trade-off between each category is summarized. In addition, the most significant performances of these robots are compared quantitatively, and multiple available solutions for the future compliant legged robot design are suggested. Finally, the design challenges for compliant legged robots are analysed. This review will provide useful guidance for robotic designers in creating new designs by inheriting the virtues of those successful robots according to the specific tasks. (topical review)

  15. An affordable proxy of representative national survey on radon concentration in dwellings: Design, organisation and preliminary evaluation of representativeness

    International Nuclear Information System (INIS)

    Antignani, Sara; Carelli, Vinicio; Cordedda, Carlo; Zonno, Fedele; Ampollini, Marco; Carpentieri, Carmela; Venoso, Gennaro; Bochicchio, Francesco

    2013-01-01

    Representative national surveys in dwellings are important to unbiasedly evaluate the exposure of the general population to radon. In Italy, a representative national survey was conducted from 1989 to 1996, which involved about 5600 dwellings in 232 towns. Later on, some Regions carried out more detailed surveys, but a new national survey in dwellings is necessary in order to obtain a more thorough estimate of radon concentration distribution over the Italian territory. The need to make this survey in an affordable way led to implement a new approach based on the collaboration between the Istituto Superiore di Sanità and a national company with workplaces and employees' homes throughout the country. The intent is to carry out a proxy of a population representative survey by measuring radon concentration in the homes of a random sample of the company employees. The realisation of this survey was affordable, thanks to the availability of corporate e-mail for each employee, intranet service, and company internal mail service. A dedicated web procedure and e-questionnaires allowed to automatically manage the contact with employees and to collect their data, which were both cost- and time-saving. Using this e-mail contact approach, 53% of contacted employees consented to participate in the survey. Radon concentration passive measuring devices were distributed to about 7000 dwellings, using about 14000 CR-39 detectors (two measured rooms per dwelling). In order to reduce costs, the devices were exposed for 12 months instead of two consecutive 6-month periods (as with the former national survey). A first checking of the actual representativeness of the sample was done by comparing characteristics of dwellings and occupants in the sample with corresponding data from the latest National Census. This was accomplished thanks to the fact that the questions in the survey questionnaire were tailored to the categories adopted for the Census questionnaire. A preliminary

  16. A Mapping of Tools for Informing Water Sensitive Urban Design Planning Decisions—Questions, Aspects and Context Sensitivity

    DEFF Research Database (Denmark)

    Lerer, Sara Maria; Arnbjerg-Nielsen, Karsten; Mikkelsen, Peter Steen

    2015-01-01

    Water Sensitive Urban Design (WSUD) poses new challenges for decision makers compared with traditional stormwater management, e.g., because WSUD offers a larger selection of measures and because many measures are multifunctional. These challenges have motivated the development of many decision...

  17. The Hyper Suprime-Cam SSP Survey: Overview and survey design

    Science.gov (United States)

    Aihara, Hiroaki; Arimoto, Nobuo; Armstrong, Robert; Arnouts, Stéphane; Bahcall, Neta A.; Bickerton, Steven; Bosch, James; Bundy, Kevin; Capak, Peter L.; Chan, James H. H.; Chiba, Masashi; Coupon, Jean; Egami, Eiichi; Enoki, Motohiro; Finet, Francois; Fujimori, Hiroki; Fujimoto, Seiji; Furusawa, Hisanori; Furusawa, Junko; Goto, Tomotsugu; Goulding, Andy; Greco, Johnny P.; Greene, Jenny E.; Gunn, James E.; Hamana, Takashi; Harikane, Yuichi; Hashimoto, Yasuhiro; Hattori, Takashi; Hayashi, Masao; Hayashi, Yusuke; Hełminiak, Krzysztof G.; Higuchi, Ryo; Hikage, Chiaki; Ho, Paul T. P.; Hsieh, Bau-Ching; Huang, Kuiyun; Huang, Song; Ikeda, Hiroyuki; Imanishi, Masatoshi; Inoue, Akio K.; Iwasawa, Kazushi; Iwata, Ikuru; Jaelani, Anton T.; Jian, Hung-Yu; Kamata, Yukiko; Karoji, Hiroshi; Kashikawa, Nobunari; Katayama, Nobuhiko; Kawanomoto, Satoshi; Kayo, Issha; Koda, Jin; Koike, Michitaro; Kojima, Takashi; Komiyama, Yutaka; Konno, Akira; Koshida, Shintaro; Koyama, Yusei; Kusakabe, Haruka; Leauthaud, Alexie; Lee, Chien-Hsiu; Lin, Lihwai; Lin, Yen-Ting; Lupton, Robert H.; Mandelbaum, Rachel; Matsuoka, Yoshiki; Medezinski, Elinor; Mineo, Sogo; Miyama, Shoken; Miyatake, Hironao; Miyazaki, Satoshi; Momose, Rieko; More, Anupreeta; More, Surhud; Moritani, Yuki; Moriya, Takashi J.; Morokuma, Tomoki; Mukae, Shiro; Murata, Ryoma; Murayama, Hitoshi; Nagao, Tohru; Nakata, Fumiaki; Niida, Mana; Niikura, Hiroko; Nishizawa, Atsushi J.; Obuchi, Yoshiyuki; Oguri, Masamune; Oishi, Yukie; Okabe, Nobuhiro; Okamoto, Sakurako; Okura, Yuki; Ono, Yoshiaki; Onodera, Masato; Onoue, Masafusa; Osato, Ken; Ouchi, Masami; Price, Paul A.; Pyo, Tae-Soo; Sako, Masao; Sawicki, Marcin; Shibuya, Takatoshi; Shimasaku, Kazuhiro; Shimono, Atsushi; Shirasaki, Masato; Silverman, John D.; Simet, Melanie; Speagle, Joshua; Spergel, David N.; Strauss, Michael A.; Sugahara, Yuma; Sugiyama, Naoshi; Suto, Yasushi; Suyu, Sherry H.; Suzuki, Nao; Tait, Philip J.; Takada, Masahiro; Takata, Tadafumi; Tamura, Naoyuki; Tanaka, Manobu M.; Tanaka, Masaomi; Tanaka, Masayuki; Tanaka, Yoko; Terai, Tsuyoshi; Terashima, Yuichi; Toba, Yoshiki; Tominaga, Nozomu; Toshikawa, Jun; Turner, Edwin L.; Uchida, Tomohisa; Uchiyama, Hisakazu; Umetsu, Keiichi; Uraguchi, Fumihiro; Urata, Yuji; Usuda, Tomonori; Utsumi, Yousuke; Wang, Shiang-Yu; Wang, Wei-Hao; Wong, Kenneth C.; Yabe, Kiyoto; Yamada, Yoshihiko; Yamanoi, Hitomi; Yasuda, Naoki; Yeh, Sherry; Yonehara, Atsunori; Yuma, Suraphong

    2018-01-01

    Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2-m Subaru telescope on the summit of Mauna Kea in Hawaii. A team of scientists from Japan, Taiwan, and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg2 in five broad bands (grizy), with a 5 σ point-source depth of r ≈ 26. The Deep layer covers a total of 26 deg2 in four fields, going roughly a magnitude fainter, while the UltraDeep layer goes almost a magnitude fainter still in two pointings of HSC (a total of 3.5 deg2). Here we describe the instrument, the science goals of the survey, and the survey strategy and data processing. This paper serves as an introduction to a special issue of the Publications of the Astronomical Society of Japan, which includes a large number of technical and scientific papers describing results from the early phases of this survey.

  18. Blade root design a state of the art survey

    Energy Technology Data Exchange (ETDEWEB)

    Sandberg, O

    1988-06-01

    This report was conceived in the wake of recent blade root failures in several horizontal axis turbines. Ten blade root designs are presented. They are considered to represent the state of the art. The information was obtained partly from literature partly from a few important projects with little or no documentation. Suggestions are made how to proceed in the development of the bonded bolt type of root retention. Presently the conclusion is that this type of arrangement seems the most promising. Developments in this field should be closely monitored, however. For this type of very high cycle fatigue designs there is a need for two redundant design principles. (author).

  19. THE HETDEX PILOT SURVEY. I. SURVEY DESIGN, PERFORMANCE, AND CATALOG OF EMISSION-LINE GALAXIES

    International Nuclear Information System (INIS)

    Adams, Joshua J.; Blanc, Guillermo A.; Gebhardt, Karl; Hao, Lei; Byun, Joyce; Fry, Alex; Jeong, Donghui; Komatsu, Eiichiro; Hill, Gary J.; Cornell, Mark E.; MacQueen, Phillip J.; Drory, Niv; Bender, Ralf; Hopp, Ulrich; Kelzenberg, Ralf; Ciardullo, Robin; Gronwall, Caryl; Finkelstein, Steven L.; Gawiser, Eric; Kelz, Andreas

    2011-01-01

    We present a catalog of emission-line galaxies selected solely by their emission-line fluxes using a wide-field integral field spectrograph. This work is partially motivated as a pilot survey for the upcoming Hobby-Eberly Telescope Dark Energy Experiment. We describe the observations, reductions, detections, redshift classifications, line fluxes, and counterpart information for 397 emission-line galaxies detected over 169 □' with a 3500-5800 A bandpass under 5 A full-width-half-maximum (FWHM) spectral resolution. The survey's best sensitivity for unresolved objects under photometric conditions is between 4 and 20x 10 -17 erg s -1 cm -2 depending on the wavelength, and Lyα luminosities between 3 x 10 42 and 6 x 10 42 erg s -1 are detectable. This survey method complements narrowband and color-selection techniques in the search of high-redshift galaxies with its different selection properties and large volume probed. The four survey fields within the COSMOS, GOODS-N, MUNICS, and XMM-LSS areas are rich with existing, complementary data. We find 105 galaxies via their high-redshift Lyα emission at 1.9 44 □' which appear to be extended Lyα nebulae. We also find three high-z objects with rest-frame Lyα EW above the level believed to be achievable with normal star formation, EW 0 >240 A. Future papers will investigate the physical properties of this sample.

  20. Child-care attendance and common morbidity: evidence of association in the literature and questions of design

    Directory of Open Access Journals (Sweden)

    Barros Aluísio J. D.

    1999-01-01

    Full Text Available Papers on child-care attendance as a risk factor for acute respiratory infections and diarrhea were reviewed. There was great variety among the studies with regard to the design, definition of exposure and definition of outcomes. All the traditional epidemiological study designs have been used. The studies varied in terms of how child-care attendance in general was defined, and for different settings. These definitions differed especially in relation to the minimum time of attendance required. The outcomes were also defined and measured in several different ways. The analyses performed were not always appropriate, leading to sets of results of uneven quality, and composed of different measures of association relating different exposures and outcomes, that made summarizing difficult. Despite that, the results reported were remarkably consistent. Only two of the papers reviewed failed to show some association between child-care attendance and increased acute respiratory infections, or diarrhea. On the other hand, the magnitude of the associations reported varied widely, especially for lower respiratory infections. Taken together, the studies so far published provide evidence that children attending child-care centers, especially those under three years of age, are at a higher risk of upper respiratory infections, lower respiratory infections, and diarrhea. The studies were not consistent, however, in relation to attendance at child-care homes. Children in such settings were sometimes similar to those in child-care centers, sometimes similar to those cared for at home, and sometimes presented an intermediate risk.

  1. Net Survey: "Top Ten Mistakes" in Academic Web Design.

    Science.gov (United States)

    Petrik, Paula

    2000-01-01

    Highlights the top ten mistakes in academic Web design: (1) bloated graphics; (2) scaling images; (3) dense text; (4) lack of contrast; (5) font size; (6) looping animations; (7) courseware authoring software; (8) scrolling/long pages; (9) excessive download; and (10) the nothing site. Includes resources. (CMK)

  2. Assessing Online Faculty: More than Student Surveys and Design Rubrics

    Science.gov (United States)

    Piña, Anthony A.; Bohn, Larry

    2014-01-01

    As online education continues to grow, so do the number of online courses being taught by those who did not develop the courses. However, the most popular rubrics for evaluating the quality of online courses tend to focus upon the course's design, not upon the actions of the instructor teaching the course. In this study, 140 distance education…

  3. Multivariable control in nuclear power stations -survey of design methods

    International Nuclear Information System (INIS)

    Mcmorran, P.D.

    1979-12-01

    The development of larger nuclear generating stations increases the importance of dynamic interaction between controllers, because each control action may affect several plant outputs. Multivariable control provides the techniques to design controllers which perform well under these conditions. This report is a foundation for further work on the application of multivariable control in AECL. It covers the requirements of control and the fundamental mathematics used, then reviews the most important linear methods, based on both state-space and frequency-response concepts. State-space methods are derived from analysis of the system differential equations, while frequency-response methods use the input-output transfer function. State-space methods covered include linear-quadratic optimal control, pole shifting, and the theory of state observers and estimators. Frequency-response methods include the inverse Nyquist array method, and classical non-interactive techniques. Transfer-function methods are particularly emphasized since they can incorporate ill-defined design criteria. The underlying concepts, and the application strengths and weaknesses of each design method are presented. A review of significant applications is also given. It is concluded that the inverse Nyquist array method, a frequency-response technique based on inverse transfer-function matrices, is preferred for the design of multivariable controllers for nuclear power plants. This method may be supplemented by information obtained from a modal analysis of the plant model. (auth)

  4. A Survey study on design procedure of Seismic Base Isolation ...

    African Journals Online (AJOL)

    Adding shear walls or braced frames can decrease the potential damage caused by earthquakes.We can isolate the structures from the ground using the Seismic Base Isolation Systems that is flexible approach to decrease the potential damage. In this research we present information on the design procedure of seismic ...

  5. The Brightest of Reionizing Galaxies Survey: Design and Preliminary Results

    Science.gov (United States)

    Trenti, M.; Bradley, L. D.; Stiavelli, M.; Oesch, P.; Treu, T.; Bouwens, R. J.; Shull, J. M.; MacKenty, J. W.; Carollo, C. M.; Illingworth, G. D.

    2011-02-01

    We present the first results on the search for very bright (M AB ≈ -21) galaxies at redshift z ~ 8 from the Brightest of Reionizing Galaxies (BoRG) survey. BoRG is a Hubble Space Telescope Wide Field Camera 3 (WFC3) pure-parallel survey that is obtaining images on random lines of sight at high Galactic latitudes in four filters (F606W, F098M, F125W, and F160W), with integration times optimized to identify galaxies at z >~ 7.5 as F098M dropouts. We discuss here results from a search area of approximately 130 arcmin2 over 23 BoRG fields, complemented by six other pure-parallel WFC3 fields with similar filters. This new search area is more than two times wider than previous WFC3 observations at z ~ 8. We identify four F098M-dropout candidates with high statistical confidence (detected at greater than 8σ confidence in F125W). These sources are among the brightest candidates currently known at z ~ 8 and approximately 10 times brighter than the z = 8.56 galaxy UDFy-38135539. They thus represent ideal targets for spectroscopic follow-up observations and could potentially lead to a redshift record, as our color selection includes objects up to z ~ 9. However, the expected contamination rate of our sample is about 30% higher than typical searches for dropout galaxies in legacy fields, such as the GOODS and HUDF, where deeper data and additional optical filters are available to reject contaminants. Based on observations made with the NASA/ESA Hubble Space Telescope, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with Programs 11700, 11702.

  6. THE BRIGHTEST OF REIONIZING GALAXIES SURVEY: DESIGN AND PRELIMINARY RESULTS

    International Nuclear Information System (INIS)

    Trenti, M.; Bradley, L. D.; Stiavelli, M.; MacKenty, J. W.; Oesch, P.; Carollo, C. M.; Treu, T.; Bouwens, R. J.; Illingworth, G. D.; Shull, J. M.

    2011-01-01

    We present the first results on the search for very bright (M AB ∼ -21) galaxies at redshift z ∼ 8 from the Brightest of Reionizing Galaxies (BoRG) survey. BoRG is a Hubble Space Telescope Wide Field Camera 3 (WFC3) pure-parallel survey that is obtaining images on random lines of sight at high Galactic latitudes in four filters (F606W, F098M, F125W, and F160W), with integration times optimized to identify galaxies at z ∼> 7.5 as F098M dropouts. We discuss here results from a search area of approximately 130 arcmin 2 over 23 BoRG fields, complemented by six other pure-parallel WFC3 fields with similar filters. This new search area is more than two times wider than previous WFC3 observations at z ∼ 8. We identify four F098M-dropout candidates with high statistical confidence (detected at greater than 8σ confidence in F125W). These sources are among the brightest candidates currently known at z ∼ 8 and approximately 10 times brighter than the z = 8.56 galaxy UDFy-38135539. They thus represent ideal targets for spectroscopic follow-up observations and could potentially lead to a redshift record, as our color selection includes objects up to z ∼ 9. However, the expected contamination rate of our sample is about 30% higher than typical searches for dropout galaxies in legacy fields, such as the GOODS and HUDF, where deeper data and additional optical filters are available to reject contaminants.

  7. Effects of sample survey design on the accuracy of classification tree models in species distribution models

    Science.gov (United States)

    Thomas C. Edwards; D. Richard Cutler; Niklaus E. Zimmermann; Linda Geiser; Gretchen G. Moisen

    2006-01-01

    We evaluated the effects of probabilistic (hereafter DESIGN) and non-probabilistic (PURPOSIVE) sample surveys on resultant classification tree models for predicting the presence of four lichen species in the Pacific Northwest, USA. Models derived from both survey forms were assessed using an independent data set (EVALUATION). Measures of accuracy as gauged by...

  8. Survey on Chatbot Design Techniques in Speech Conversation Systems

    OpenAIRE

    Sameera A. Abdul-Kader; Dr. John Woods

    2015-01-01

    Human-Computer Speech is gaining momentum as a technique of computer interaction. There has been a recent upsurge in speech based search engines and assistants such as Siri, Google Chrome and Cortana. Natural Language Processing (NLP) techniques such as NLTK for Python can be applied to analyse speech, and intelligent responses can be found by designing an engine to provide appropriate human like responses. This type of programme is called a Chatbot, which is the focus of this study. This pap...

  9. A Survey on the Color of Interior Design for University Students

    OpenAIRE

    Takata, Hiroshi

    2008-01-01

    The purpose of this study is to clarify the actual conditions of the color on interior design for university students. At first, the author carried out the questionnaire survey in order to grasp the characteristics of respondents and their consciousness of interior and color design. Based on the results of the questionnaire survey, the relationship between the characteristics of respondents and their consciousness was studied. Especially, the influence of the respondents' academic grade and t...

  10. Effect of survey design and catch rate estimation on total catch estimates in Chinook salmon fisheries

    Science.gov (United States)

    McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

    2012-01-01

    Roving–roving and roving–access creel surveys are the primary techniques used to obtain information on harvest of Chinook salmon Oncorhynchus tshawytscha in Idaho sport fisheries. Once interviews are conducted using roving–roving or roving–access survey designs, mean catch rate can be estimated with the ratio-of-means (ROM) estimator, the mean-of-ratios (MOR) estimator, or the MOR estimator with exclusion of short-duration (≤0.5 h) trips. Our objective was to examine the relative bias and precision of total catch estimates obtained from use of the two survey designs and three catch rate estimators for Idaho Chinook salmon fisheries. Information on angling populations was obtained by direct visual observation of portions of Chinook salmon fisheries in three Idaho river systems over an 18-d period. Based on data from the angling populations, Monte Carlo simulations were performed to evaluate the properties of the catch rate estimators and survey designs. Among the three estimators, the ROM estimator provided the most accurate and precise estimates of mean catch rate and total catch for both roving–roving and roving–access surveys. On average, the root mean square error of simulated total catch estimates was 1.42 times greater and relative bias was 160.13 times greater for roving–roving surveys than for roving–access surveys. Length-of-stay bias and nonstationary catch rates in roving–roving surveys both appeared to affect catch rate and total catch estimates. Our results suggest that use of the ROM estimator in combination with an estimate of angler effort provided the least biased and most precise estimates of total catch for both survey designs. However, roving–access surveys were more accurate than roving–roving surveys for Chinook salmon fisheries in Idaho.

  11. The renewable portfolio standard: design considerations and an implementation survey

    International Nuclear Information System (INIS)

    Berry, T.; Jaccard, M.

    2001-01-01

    Renewables have social and environmental benefits compared to conventional electricity sources, but are rarely competitive on a strict financial cost basis. This is because conventional sources are sometimes subsidized, their full pollution costs are ignored, and renewables involve newer, higher-cost technologies whose relative costs will fall with commercialization. Governments use several mechanisms to support renewables, including direct financial support (grants, loans), indirect support (R and D, demonstrations), reform of financial costs of conventional sources (subsidy removal, pollution taxes), and the Renewable Portfolio Standard (RPS). The RPS requires a minimum share of electricity from renewable energy sources. Its use is spreading because it maintains an incentive for renewable producers to reduce costs, links the regulated market outcome to an environmental target, and reduces government involvement. Although it is too early to evaluate fully its effectiveness, the survey for this study explored implementation issues in three European countries, nine US states, and Australia, and found the following. The RPS target is usually set to have environmental benefits without causing significant price increases (cost caps are sometimes used). Most jurisdictions limit eligibility to grid-connected, domestic renewables. The RPS is usually applied to producers rather than consumers, and to energy output not capacity. Flexibility mechanisms are desired but a challenge to implement. Administration in the US and Australia is by government with delegation to independent utility regulators, while in Europe it is more the responsibility of government. Everywhere, the RPS is applied alongside other mechanisms of renewables support. (author)

  12. Questioning the causal link between maternal smoking during pregnancy and offspring use of psychotropic medication: a sibling design analysis.

    Directory of Open Access Journals (Sweden)

    Lovisa Söderström

    Full Text Available A recent population-based, longitudinal study from Finland observed a dose-response association between smoking during pregnancy (SDP and use of psychotropic medications in exposed children and young adults. However, this association may be confounded by unmeasured familial characteristics related to both SDP and offspring mental health. Consequently, we aim to investigate the effect of SDP by means of a sibling design that to some extent allows controlling for unknown environmental and genetic confounders. Using the Swedish Medical Birth Register (1987-1993, which was linked to the Swedish Prescribed Drugs Register (July 2005-December 2008, we investigated 579,543 children and among them 39, 007 were discordant for use of psychotropic medication and 4,021 siblings discordant for both use of psychotropic medication and for smoking exposure. Replicating the Finnish study using traditional logistic regression methods we found an association between exposure to ≥10 cigarettes per day during pregnancy and psychotropic drug use (odds ratio = 1.61, 95% confidence interval 1.56, 1.66. Similar in size to the association reported from Finland (odds ratio = 1.63; 95% confidence interval 1.53, 1.74. However, in the adjusted sibling analysis using conditional logistic regression, the association was considerably reduced (odds ratio 1.22; 95% confidence interval 1.08, 1.38. Preventing smoking is of major public health importance. However, SDP per se appears to have less influence on offspring psychotropic drug use than previously suggested.

  13. Feasibility planning study for a behavior database. Volume III Appendix B, Compendium of survey questions on drinking and driving and occupant restraints

    Science.gov (United States)

    1987-04-01

    The general objective of the project was to determine the feasibility of and the general requirements for a centralized database on driver behavior and attitudes related to drunk driving and occupant restraints. Volume III is a compendium of question...

  14. Hit by a Perfect Storm? Art & Design in the National Student Survey

    Science.gov (United States)

    Yorke, Mantz; Orr, Susan; Blair, Bernadette

    2014-01-01

    There has long been the suspicion amongst staff in Art & Design that the ratings given to their subject disciplines in the UK's National Student Survey are adversely affected by a combination of circumstances--a "perfect storm". The "perfect storm" proposition is tested by comparing ratings for Art & Design with those…

  15. Question Inventory on Tobacco (QIT)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 1965, 1966, 1970, 1974-2017. Centers for Disease Control and Prevention (CDC). Office on Smoking and Health (OSH). Tobacco-Related Survey Questions. The QIT is a...

  16. Pooling Time Series Based on Slightly Different Questions About the Same Topic Forty Years of Survey Research on Happiness and Life Satisfaction in The Netherlands

    NARCIS (Netherlands)

    T. DeJonge (Tineke); R. Veenhoven (Ruut); W.M. Kalmijn (Wim); L.R. Arends (Lidia)

    2016-01-01

    textabstractSurvey research on subjective wellbeing in The Netherlands started in the early 1970s. The time series happiness and life satisfaction that have emerged since then are unfortunately based on slightly different survey items of which one part uses verbal response scales and another part

  17. The diverse values and motivations of family forest owners in the United States: An analysis of an open-ended question in the National Woodland Owner Survey

    Science.gov (United States)

    David N. Bengston; Stanley T. Asah; Brett J. Butler

    2011-01-01

    The number of family forest owners in the USA has increased continuously in recent decades, and the fate of much of US forests lies in the hands of this diverse and dynamic group of people. The National Woodland Owner Survey (NWOS) is a recurring and comprehensive national survey of US private forest owners, including family forest owners. The NWOS includes an open-...

  18. Sensitivity of measuring the progress in financial risk protection to survey design and its socioeconomic and demographic determinants: A case study in Rwanda.

    Science.gov (United States)

    Lu, Chunling; Liu, Kai; Li, Lingling; Yang, Yuhong

    2017-04-01

    Reliable and comparable information on households with catastrophic health expenditure (HCHE) is crucial for monitoring and evaluating our progress towards achieving universal financial risk protection. This study aims to investigate the sensitivity of measuring the progress in financial risk protection to survey design and its socioeconomic and demographic determinants. Using the Rwanda Integrated Living Conditions Survey in 2005 and 2010/2011, we derived the level and trend of the percentage of the HCHE using out-of-pocket health spending data derived from (1) a health module with a two-week recall period and six (2005)/seven (2010/2011) survey questions (Method 1) and (2) a consumption module with a four-week/ten-/12-month recall period and 11(2005)/24 (2010/2011) questions (Method 2). Using multilevel logistic regression analysis, we investigated the household socioeconomic and demographic characteristics that affected the sensitivity of estimating the HCHE to survey design. We found that Method 1 generated a significantly higher HCHE estimate (9.2%, 95% confidence interval 8.4%-10.0%) than Method2 (7.4%, 6.6%-8.1%) in 2005 and lower estimate (5.6%, 5.2%-6.1%) than Method 2 (8.2%, 7.6%-8.7%) in 2010/2011. The estimated trends of the HCHE using the two methods were not consistent between the two years. A household's size, its income quintile, having no under-five children, and educational level of its head were positively associated with the consistency of its HCHE status when using the two survey methods. Estimates of the progress in financial risk protection, especially among the most vulnerable households, are sensitive to survey design. These results are robust to various thresholds of catastrophic health spending. Future work must focus on mitigating survey effects through the development of statistical tools. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Wide Field Infrared Survey Telescope [WFIRST]: telescope design and simulated performance

    Science.gov (United States)

    Goullioud, R.; Content, D. A.; Kuan, G. M.; Moore, J. D.; Chang, Z.; Sunada, E. T.; Villalvazo, J.; Hawk, J. P.; Armani, N. V.; Johnson, E. L.; Powell, C. A.

    2012-09-01

    The Wide Field Infrared Survey Telescope (WFIRST) mission concept was ranked first in new space astrophysics missions by the Astro2010 Decadal Survey, incorporating the Joint Dark Energy Mission payload concept and multiple science white papers. This mission is based on a space telescope at L2 studying exoplanets [via gravitational microlensing], probing dark energy, and surveying the near infrared sky. Since the release of the Astro2010 Decadal Survey, the team has been working with the WFIRST Science Definition Team to refine mission and payload concepts. We present the current interim reference mission point design of the payload, based on the use of a 1.3m unobscured aperture three mirror anastigmat form, with focal imaging and slit-less spectroscopy science channels. We also present the first results of Structural/Thermal/Optical performance modeling of the telescope point design.

  20. A Survey on Efficient Collaboration of Design and Simulation in Product Development

    OpenAIRE

    Kreimeyer, M.;Deubzer, F.;Herfeld, U..;Lindemann, U.

    2017-01-01

    Efficient collaboration is a popular topic in all kinds of industry with products evolving into evermore complex sytems and with taylorism in product development increasing. With the goal of satisfying the customer’s functional desires for the product, the cooperation of embodiment design, simulation and testing departments in a company plays an essential role. The results of a survey to explore problems and chances of the former two are layed out in the following. For the survey, about 50 qu...

  1. The Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS): survey design, data catalogue and GAMA/WiggleZ spectroscopy

    Science.gov (United States)

    Ching, John H. Y.; Sadler, Elaine M.; Croom, Scott M.; Johnston, Helen M.; Pracy, Michael B.; Couch, Warrick J.; Hopkins, A. M.; Jurek, Russell J.; Pimbblet, K. A.

    2017-01-01

    We present the Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS), a spectroscopic catalogue of radio sources designed to include the full range of radio AGN populations out to redshift z ˜ 0.8. The catalogue covers ˜800 deg2 of sky, and provides optical identifications for 19 179 radio sources from the 1.4 GHz Faint Images of the Radio Sky at Twenty-cm (FIRST) survey down to an optical magnitude limit of Imod point-like objects are included, and no colour cuts are applied. In collaboration with the WiggleZ and Galaxy And Mass Assembly (GAMA) spectroscopic survey teams, we have obtained new spectra for over 5000 objects in the LARGESS sample. Combining these new spectra with data from earlier surveys provides spectroscopic data for 12 329 radio sources in the survey area, of which 10 856 have reliable redshifts. 85 per cent of the LARGESS spectroscopic sample are radio AGN (median redshift z = 0.44), and 15 per cent are nearby star-forming galaxies (median z = 0.08). Low-excitation radio galaxies (LERGs) comprise the majority (83 per cent) of LARGESS radio AGN at z < 0.8, with 12 per cent being high-excitation radio galaxies (HERGs) and 5 per cent radio-loud QSOs. Unlike the more homogeneous LERG and QSO sub-populations, HERGs are a heterogeneous class of objects with relatively blue optical colours and a wide dispersion in mid-infrared colours. This is consistent with a picture in which most HERGs are hosted by galaxies with recent or ongoing star formation as well as a classical accretion disc.

  2. Can multiple-choice questions simulate free-response questions?

    OpenAIRE

    Lin, Shih-Yin; Singh, Chandralekha

    2016-01-01

    We discuss a study to evaluate the extent to which free-response questions could be approximated by multiple-choice equivalents. Two carefully designed research-based multiple-choice questions were transformed into a free-response format and administered on the final exam in a calculus-based introductory physics course. The original multiple-choice questions were administered in another similar introductory physics course on final exam. Findings suggest that carefully designed multiple-choice...

  3. VQABQ: Visual Question Answering by Basic Questions

    KAUST Repository

    Huang, Jia-Hong

    2017-03-19

    Taking an image and question as the input of our method, it can output the text-based answer of the query question about the given image, so called Visual Question Answering (VQA). There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the basic questions of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question. We formulate the basic questions generation problem as a LASSO optimization problem, and also propose a criterion about how to exploit these basic questions to help answer main question. Our method is evaluated on the challenging VQA dataset and yields state-of-the-art accuracy, 60.34% in open-ended task.

  4. VQABQ: Visual Question Answering by Basic Questions

    KAUST Repository

    Huang, Jia-Hong; Alfadly, Modar; Ghanem, Bernard

    2017-01-01

    Taking an image and question as the input of our method, it can output the text-based answer of the query question about the given image, so called Visual Question Answering (VQA). There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the basic questions of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question. We formulate the basic questions generation problem as a LASSO optimization problem, and also propose a criterion about how to exploit these basic questions to help answer main question. Our method is evaluated on the challenging VQA dataset and yields state-of-the-art accuracy, 60.34% in open-ended task.

  5. The use of SMIRP for the rapid design and implementation of pedagogical constructs: Case study of a question-answer-reference framework

    Directory of Open Access Journals (Sweden)

    Jeremy Boecker,

    2003-01-01

    Full Text Available The use of SMIRP, a web-based collaborative tool, for an application in an undergraduate and a graduate class is described. SMIRP was used to rapidly construct a collaborative space where students could work on their assignment, request assistance and view their grades. The pedagogical construct was based on a question-answer-reference model where students were required to answer a series of questions based only on the material present in references they selected from the open literature. The answers and grades of all students were visible to all students in real time, although pseudonyms were used to respect student privacy. Email alerts were provided to the teacher, teaching assistants and in the second class also to the students and a librarian. Based on the analysis of log files, overall student performance in the class was found to correlate positively with curiosity and negatively with procrastination. Student expectations of turnaround times for grades and general queries were also analyzed and compared to actual performance. At the end of both classes a questionnaire module was created and an analysis of student satisfaction and preferences is reported. The successful implementation of SMIRP in these two classes supports the contention that this collaborative tool is flexible enough for the rapid design and implementation of relatively complex pedagogical constructs, with the possibility of obtaining detailed metrics.

  6. Screen Design Guidelines for Motivation in Interactive Multimedia Instruction: A Survey and Framework for Designers.

    Science.gov (United States)

    Lee, Sung Heum; Boling, Elizabeth

    1999-01-01

    Identifies guidelines from the literature relating to screen design and design of interactive instructional materials. Describes two types of guidelines--those aimed at enhancing motivation and those aimed at preventing loss of motivation--for typography, graphics, color, and animation and audio. Proposes a framework for considering motivation in…

  7. [Design and implementation of data checking system for Chinese materia medica resources survey].

    Science.gov (United States)

    Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Jing, Zhi-Xian; Qi, Yuan-Hua; Wang, Ling; Zhao, Yu-Ping; Wang, Wei; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    The Chinese material medica resources (CMMR) national survey information management system has collected a large amount of data. To help dealing with data recheck, reduce the work of inside, improve the recheck of survey data from provincial and county level, National Resource Center for Chinese Materia Medical has designed a data checking system for Chinese material medica resources survey based on J2EE technology, Java language, Oracle data base in accordance with the SOA framework. It includes single data check, check score, content manage, check the survey data census data with manual checking and automatic checking about census implementation plan, key research information, general survey information, cultivation of medicinal materials information, germplasm resources information the medicine information, market research information, traditional knowledge information, specimen information of this 9 aspects 20 class 175 indicators in two aspects of the quantity and quality. The established system assists in the completion of the data consistency and accuracy, pushes the county survey team timely to complete the data entry arrangement work, so as to improve the integrity, consistency and accuracy of the survey data, and ensure effective and available data, which lay a foundation for providing accurate data support for national survey of the Chinese material medica resources (CMMR) results summary, and displaying results and sharing. Copyright© by the Chinese Pharmaceutical Association.

  8. Are They Climbing the Pyramid? Rating Student-Generated Questions in a Game Design Project / Grimpent-ils la pyramide? Évaluation des questions produites par les étudiants dans un projet de conception de jeux

    Directory of Open Access Journals (Sweden)

    Jason Paul Siko

    2013-02-01

    Full Text Available Researchers have examined the use of homemade PowerPoint games as an instructional technique to improve learning outcomes. However, test data have shown no significant difference in performance between high school chemistry students who created games and students who did not (Siko, Barbour, & Toker, 2011. One of the justifications for the use of the games is that students will, with practice, write higher-order questions when constructing the games. Two subject matter experts rated over 2,500 questions from games created by students in an environmental chemistry class through thematic analysis using Bloom’s taxonomy as a coding scheme. The students wrote primarily recall questions, and students who created games on two occasions did not write more questions than students who only created games once. This suggests that changes to the question-writing aspect of the game project may be necessary in order to see improvements in achievement when compared to control groups. Les chercheurs ont étudié l’usage de jeux PowerPoint maison en tant que technique pédagogique visant à améliorer les résultats d'apprentissage. Les données des tests n'ont toutefois révélé aucune différence significative quant au niveau de performance des étudiants du secondaire en chimie ayant créé des jeux et celui des étudiants n’en ayant pas conçus (Siko, Barbour, et Toker, 2011. L’utilisation des jeux est notamment justifiée par l’idée que, pratique aidant, les étudiants écrivent des questions plus complexes lorsqu’ils élaborent des jeux. Au moyen d’une analyse thématique utilisant la taxonomie de Bloom comme système de codification, deux experts chimistes ont évalué plus de 2500 questions provenant de jeux conçus par des étudiants d’une classe de chimie environnementale. Les étudiants ont rédigé principalement des questions faisant appel à la mémoire, et les étudiants ayant créé des jeux à deux reprises n’ont pas produit

  9. Design and operation of the national home health aide survey: 2007-2008.

    Science.gov (United States)

    Bercovitz, Anita; Moss, Abigail J; Sengupta, Manisha; Harris-Kojetin, Lauren D; Squillace, Marie R; Emily, Rosenoff; Branden, Laura

    2010-03-01

    This report provides an overview of the National Home Health Aide Survey (NHHAS), the first national probability survey of home health aides. NHHAS was designed to provide national estimates of home health aides who provided assistance in activities of daily living (ADLs) and were directly employed by agencies that provide home health and/or hospice care. This report discusses the need for and objectives of the survey, the design process, the survey methods, and data availability. METHODS NHHAS, a multistage probability sample survey, was conducted as a supplement to the 2007 National Home and Hospice Care Survey (NHHCS). Agencies providing home health and/or hospice care were sampled, and then aides employed by these agencies were sampled and interviewed by telephone. Survey topics included recruitment, training, job history, family life, client relations, work-related injuries, and demographics. NHHAS was virtually identical to the 2004 National Nursing Assistant Survey of certified nursing assistants employed in sampled nursing homes with minor changes to account for differences in workplace environment and responsibilities. RESULTS From September 2007 to April 2008, interviews were completed with 3,416 aides. A public-use data file that contains the interview responses, sampling weights, and design variables is available. The NHHAS overall response rate weighted by the inverse of the probability of selection was 41 percent. This rate is the product of the weighted first-stage agency response rate of 57 percent (i.e., weighted response rate of 59 percent for agency participation in NHHCS times the weighted response rate of 97 percent for agencies participating in NHHCS that also participated in NHHAS) and the weighted second-stage aide response rate of 72 percent to NHHAS.

  10. [Design and Implementation of the Data Collection Tools for National Mental Health Survey of Colombia, 2015].

    Science.gov (United States)

    Rodriguez, Viviana; Moreno, Socorro; Camacho, Jhon; Gómez-Restrepo, Carlos; de Santacruz, Cecilia; Rodriguez, Maria Nelcy; Tamayo Martínez, Nathalie

    2016-12-01

    Population surveys on mental health are performed as part of the inputs required for the creation, implementation and evaluation of policies related to mental health, worldwide, and as an initiative of the World Health Organisation (WHO). was held The fourth National Survey of Mental Health (ENSM 2015) was carried out during the first half of 2015 on a representative sample of 2,727 children between 7 and 11 years of age, 1,754 adolescents, and 10, 870 adults who were selected throughout the country. To describe the selection and definition of the tools used to measure mental health (including social cognition and violence), problems, mental disorders, and the evaluation of health states, as well as to describe the process used to develop the data collection tools finally used. The measurement of mental disorders in children was performed using the Diagnostic Interview Schedule for Children (DISC), and the Composite International Diagnostic Interview (CIDI) was used for adolescents and adults. For the remaining components evaluated in the survey, a search was conducted on the tools used at a national and international level. The selection of the toos used for the evaluation was based on the questions made by each tool, as well as the scientific validity that could be obtained from the results. In some cases the complete tool (as published) was used, in other cases the tools were constructed unifying parts of different ones, or questions were written based on the concepts or characteristics to be measured. Subsequently, a validation of content, concept and semantic of every tool was carried out, including the CIDI and DISC. The resulting tools were used on a group of people with different characteristics. It was noted that further clarification was necessary for some people to fully understand what was being asked. Because the collection of all the information in the survey would be computer assisted, a stream format was generated to guide the implementation in

  11. Simulating future uncertainty to guide the selection of survey designs for long-term monitoring

    Science.gov (United States)

    Garman, Steven L.; Schweiger, E. William; Manier, Daniel J.; Gitzen, Robert A.; Millspaugh, Joshua J.; Cooper, Andrew B.; Licht, Daniel S.

    2012-01-01

    A goal of environmental monitoring is to provide sound information on the status and trends of natural resources (Messer et al. 1991, Theobald et al. 2007, Fancy et al. 2009). When monitoring observations are acquired by measuring a subset of the population of interest, probability sampling as part of a well-constructed survey design provides the most reliable and legally defensible approach to achieve this goal (Cochran 1977, Olsen et al. 1999, Schreuder et al. 2004; see Chapters 2, 5, 6, 7). Previous works have described the fundamentals of sample surveys (e.g. Hansen et al. 1953, Kish 1965). Interest in survey designs and monitoring over the past 15 years has led to extensive evaluations and new developments of sample selection methods (Stevens and Olsen 2004), of strategies for allocating sample units in space and time (Urquhart et al. 1993, Overton and Stehman 1996, Urquhart and Kincaid 1999), and of estimation (Lesser and Overton 1994, Overton and Stehman 1995) and variance properties (Larsen et al. 1995, Stevens and Olsen 2003) of survey designs. Carefully planned, “scientific” (Chapter 5) survey designs have become a standard in contemporary monitoring of natural resources. Based on our experience with the long-term monitoring program of the US National Park Service (NPS; Fancy et al. 2009; Chapters 16, 22), operational survey designs tend to be selected using the following procedures. For a monitoring indicator (i.e. variable or response), a minimum detectable trend requirement is specified, based on the minimum level of change that would result in meaningful change (e.g. degradation). A probability of detecting this trend (statistical power) and an acceptable level of uncertainty (Type I error; see Chapter 2) within a specified time frame (e.g. 10 years) are specified to ensure timely detection. Explicit statements of the minimum detectable trend, the time frame for detecting the minimum trend, power, and acceptable probability of Type I error (

  12. How many hours do you usually work? An analysis of the working hours questions in 26 large-scale surveys in six countries and the European Union

    OpenAIRE

    Tijdens, K.; Dragstra, A.

    2007-01-01

    This article reviews how working hours are asked for in 26 large-scale surveys in six countries plus the European Union. Four dimensions of working time were investigated, notably number of working hours, timing of work, predictability and control over hours, and commuting time. Although almost all questionnaires ask for hours worked, the terminology varies greatly. In only half of the cases a reference period is taken into account and in half the reasons for working more/less in the survey w...

  13. How many hours do you usually work? An analysis of the working hours questions in 26 large-scale surveys in 6 countries and the European Union.

    OpenAIRE

    Dragstra, A.; Tijdens, K.

    2004-01-01

    This paper reviews how working hours are asked in 26 large-scale surveys in 6 countries plus the European Union. Four dimensions of working time were investigated, notably number of working hours, timing of work, predictability and control over hours, and commuting time. Although almost all questionnaires ask for hours worked, the terminology varies largely. In only half of the cases a reference period is taken into account and in half the reasons for working more/less in the survey week than...

  14. The Laboratory Course Assessment Survey: A Tool to Measure Three Dimensions of Research-Course Design

    Science.gov (United States)

    Corwin, Lisa A.; Runyon, Christopher; Robinson, Aspen; Dolan, Erin L.

    2015-01-01

    Course-based undergraduate research experiences (CUREs) are increasingly being offered as scalable ways to involve undergraduates in research. Yet few if any design features that make CUREs effective have been identified. We developed a 17-item survey instrument, the Laboratory Course Assessment Survey (LCAS), that measures students’ perceptions of three design features of biology lab courses: 1) collaboration, 2) discovery and relevance, and 3) iteration. We assessed the psychometric properties of the LCAS using established methods for instrument design and validation. We also assessed the ability of the LCAS to differentiate between CUREs and traditional laboratory courses, and found that the discovery and relevance and iteration scales differentiated between these groups. Our results indicate that the LCAS is suited for characterizing and comparing undergraduate biology lab courses and should be useful for determining the relative importance of the three design features for achieving student outcomes. PMID:26466990

  15. How many hours do you usually work? An analysis of the working hours questions in 26 large-scale surveys in 6 countries and the European Union.

    NARCIS (Netherlands)

    Dragstra, A.; Tijdens, K.

    2004-01-01

    This paper reviews how working hours are asked in 26 large-scale surveys in 6 countries plus the European Union. Four dimensions of working time were investigated, notably number of working hours, timing of work, predictability and control over hours, and commuting time. Although almost all

  16. How many hours do you usually work? An analysis of the working hours questions in 26 large-scale surveys in six countries and the European Union

    NARCIS (Netherlands)

    Tijdens, K.; Dragstra, A.

    2007-01-01

    This article reviews how working hours are asked for in 26 large-scale surveys in six countries plus the European Union. Four dimensions of working time were investigated, notably number of working hours, timing of work, predictability and control over hours, and commuting time. Although almost all

  17. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys

    OpenAIRE

    Hund, Lauren; Bedrick, Edward J.; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we comp...

  18. Final report on the radiological surveys of designated DX firing sites at Los Alamos National Laboratory

    International Nuclear Information System (INIS)

    1996-01-01

    CHEMRAD was contracted by Los Alamos National Laboratory to perform USRADS reg-sign (UltraSonic Ranging And Data System) radiation scanning surveys at designated DX Sites at the Los Alamos National Laboratory. The primary purpose of these scanning surveys was to identify the presence of Depleted Uranium (D-38) resulting from activities at the DX Firing Sites. This effort was conducted to update the most recent surveys of these areas. This current effort was initiated with site orientation on August 12, 1996. Surveys were completed in the field on September 4, 1996. This Executive Summary briefly presents the major findings of this work. The detail survey results are presented in the balance of this report and are organized by Technical Area and Site number in section 2. This organization is not in chronological order. USRADS and the related survey methods are described in section 3. Quality Control issues are addressed in section 4. Surveys were conducted with an array of radiation detectors either mounted on a backpack frame for man-carried use (Manual mode) or on a tricycle cart (RadCart mode). The array included radiation detectors for gamma and beta surface near surface contamination as well as dose rate at 1 meter above grade. The radiation detectors were interfaced directly to an USRADS 2100 Data Pack

  19. Progress in XRCS-Survey plant instrumentation and control design for ITER

    International Nuclear Information System (INIS)

    Varshney, Sanjeev; Jha, Shivakant; Simrock, Stefan; Barnsley, Robin; Martin, Vincent; Mishra, Sapna; Patil, Prabhakant; Patel, Shreyas; Kumar, Vinay

    2016-01-01

    Highlights: • An identification of the major process functions system compliant to Plant Control Design Handbook (PCDH) has been made for XRCS-Survey plant I&C. • I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using Enterprise architect (EA). • I&C architecture, interface with ITER networks and Plants, configuration of cubicles are discussed towards nine design review deliverables. - Abstract: A real time, plasma impurity survey system based on X-ray Crystal Spectroscopy (XRCS) has been designed for ITER and will be made available in the set of first plasma diagnostics for measuring impurity ion concentrations and their in-flux. For the purpose of developing a component level design of XRCS-Survey plant I&C system that is compliant to the rules and guidelines defined in the Plant Control Design Handbook (PCDH), firstly an identification of the major process functions has been made. The preliminary plant I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using a system engineering tool, Enterprise Architect (EA). Conceptual I&C architecture, interface with the ITER networks and other Plants have been discussed along with the basic configuration of I&C cubicles aiming towards nine I&C deliverables for the design review.

  20. Progress in XRCS-Survey plant instrumentation and control design for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Varshney, Sanjeev, E-mail: sanjeev.varshney@iter-india.org [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Jha, Shivakant [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Simrock, Stefan; Barnsley, Robin; Martin, Vincent [ITER-Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-Lez-Durance, Cedex (France); Mishra, Sapna [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Patil, Prabhakant [ITER-Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-Lez-Durance, Cedex (France); Patel, Shreyas; Kumar, Vinay [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India)

    2016-11-15

    Highlights: • An identification of the major process functions system compliant to Plant Control Design Handbook (PCDH) has been made for XRCS-Survey plant I&C. • I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using Enterprise architect (EA). • I&C architecture, interface with ITER networks and Plants, configuration of cubicles are discussed towards nine design review deliverables. - Abstract: A real time, plasma impurity survey system based on X-ray Crystal Spectroscopy (XRCS) has been designed for ITER and will be made available in the set of first plasma diagnostics for measuring impurity ion concentrations and their in-flux. For the purpose of developing a component level design of XRCS-Survey plant I&C system that is compliant to the rules and guidelines defined in the Plant Control Design Handbook (PCDH), firstly an identification of the major process functions has been made. The preliminary plant I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using a system engineering tool, Enterprise Architect (EA). Conceptual I&C architecture, interface with the ITER networks and other Plants have been discussed along with the basic configuration of I&C cubicles aiming towards nine I&C deliverables for the design review.

  1. Examining unanswered questions about the home environment and childhood obesity disparities using an incremental, mixed-methods, longitudinal study design: The Family Matters study.

    Science.gov (United States)

    Berge, Jerica M; Trofholz, Amanda; Tate, Allan D; Beebe, Maureen; Fertig, Angela; Miner, Michael H; Crow, Scott; Culhane-Pera, Kathleen A; Pergament, Shannon; Neumark-Sztainer, Dianne

    2017-11-01

    There are disparities in the prevalence of childhood obesity for children from low-income and minority households. Mixed-methods studies that examine home environments in an in-depth manner are needed to identify potential mechanisms driving childhood obesity disparities that have not been examined in prior research. The Family Matters study aims to identify risk and protective factors for childhood obesity in low-income and minority households through a two-phased incremental, mixed-methods, and longitudinal approach. Individual, dyadic (i.e., parent/child; siblings), and familial factors that are associated with, or moderate associations with childhood obesity will be examined. Phase I includes in-home observations of diverse families (n=150; 25 each of African American, American Indian, Hispanic/Latino, Hmong, Somali, and White families). In-home observations include: (1) an interactive observational family task; (2) ecological momentary assessment of parent stress, mood, and parenting practices; (3) child and parent accelerometry; (4) three 24-hour child dietary recalls; (5) home food inventory; (6) built environment audit; (7) anthropometry on all family members; (8) an online survey; and (9) a parent interview. Phase I data will be used for analyses and to inform development of a culturally appropriate survey for Phase II. The survey will be administered at two time points to diverse parents (n=1200) of children ages 5-9. The main aim of the current paper is to describe the Family Matters complex study design and protocol and to report Phase I feasibility data for participant recruitment and study completion. Results from this comprehensive study will inform the development of culturally-tailored interventions to reduce childhood obesity disparities. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. The Danish National Health Survey 2010. Study design and respondent characteristics

    DEFF Research Database (Denmark)

    Christensen, Anne Illemann; Ekholm, Ola; Glümer, Charlotte

    2012-01-01

    In 2010 the five Danish regions and the National Institute of Public Health at the University of Southern Denmark conducted a national representative health survey among the adult population in Denmark. This paper describes the study design and the sample and study population as well as the conte...

  3. "Is This Ethical?" A Survey of Opinion on Principles and Practices of Document Design.

    Science.gov (United States)

    Dragga, Sam

    1996-01-01

    Reprints a corrected version of an article originally published in the volume 43, number 1 issue of this journal. Presents results of a national survey of technical communicators and technical communication teachers assessing the ethics of seven document design cases involving manipulation of typography, illustrations, and photographs. Offers…

  4. A survey of the French creep-fatigue design rules for LMFBR

    International Nuclear Information System (INIS)

    Tribout, J.; Cordier, G.; Moulin, D.

    1987-01-01

    The paper provides a survey of the creep-fatigue design rules for the LMFBR in France. These rules are the ones currently implemented in French component manufacturing. The background of each item is discussed and the trends for improvements currently investigated are described. The creep-fatigue rules apply to elastic analysis only. (orig.)

  5. Report on the Survey of the Design Review of New Reactor Applications. Volume 3: Reactor

    International Nuclear Information System (INIS)

    Downey, Steven; Monninger, John; Nevalainen, Janne; Lorin, Aurelie; ); Webster, Philip; Joyer, Philippe; Kawamura, Tomonori; Lankin, Mikhail; Kubanyi, Jozef; Haluska, Ladislav; Persic, Andreja; Reierson, Craig; Kang, Kyungmin; Kim, Walter

    2016-01-01

    At the tenth meeting of the CNRA Working Group on the Regulation of New Reactors (WGRNR) in March 2013, the Working Group agreed to present the responses to the Second Phase, or Design Phase, of the Licensing Process Survey as a multi-volume text. As such, each report will focus on one of the eleven general technical categories covered in the survey. The general technical categories were selected to conform to the topics covered in the International Atomic Energy Agency (IAEA) Safety Guide GS-G-4.1. This document, which is the third report on the results of the Design Phase Survey, focuses on the Reactor. The Reactor category includes the following technical topics: fuel system design, reactor internals and core support, nuclear design and core nuclear performance, thermal and hydraulic design, reactor materials, and functional design of reactivity control system. For each technical topic, the member countries described the information provided by the applicant, the scope and level of detail of the technical review, the technical basis for granting regulatory authorisation, the skill sets required and the level of effort needed to perform the review. Based on a comparison of the information provided by the member countries in response to the survey, the following observations were made: - Although the description of the information provided by the applicant differs in scope and level of detail among the member countries that provided responses, there are similarities in the information that is required. - All of the technical topics covered in the survey are reviewed in some manner by all of the regulatory authorities that provided responses. - Design review strategies most commonly used to confirm that the regulatory requirements have been met include document review and independent verification of calculations, computer codes, or models used to describe the design and performance of the core and the fuel. - It is common to consider operating experience and

  6. When the Research Design Matters in EFL Context: A Case of Different Responses to Open-response and Closed-response Questions on Motivational Orientation

    Directory of Open Access Journals (Sweden)

    Ma‘ssoumeh Bemani Naeini

    2012-11-01

    Full Text Available This study aimed at investigating and exploring the degree of motivational orientation (i.e. instrumental and integrative motivation among sixty Iranian TEFL students. A survey research design was used to collect both quantitative and qualitative data, using a Likert-scale questionnaire containing six open-response items. Inferential analysis of quantitative data identified the subjects of the study with integrative orientation. However, descriptive analysis of open responses in terms of coded recurrent themes indicated contradictory results. In sum, the findings suggest a gap between Iranian TEFL students’ “desirable motivation” and “desired motivation”. The researcher attributes the contradictory results not only to the social context, but also to the type of questionnaire and the psychological status of respondents. Also, the findings provide support for other components of motivation other than just instrumentality and integrativeness, mainly “personal” aspects as proposed by Benson’s model of motivation.

  7. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Directory of Open Access Journals (Sweden)

    Lauren Hund

    Full Text Available Lot quality assurance sampling (LQAS surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  8. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Science.gov (United States)

    Hund, Lauren; Bedrick, Edward J; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes) depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  9. Marine radio-ecology, surveying and predicting: French coasts watched by the IRSN; In the search for finer predictions; Answering the questions of a city council before works

    International Nuclear Information System (INIS)

    Anon.

    2012-01-01

    A set of articles presents the activities and missions undertaken by the IRSN in order to control, understand and predict the behaviour of radionuclides in the sea. Twenty three measurement stations are located along the French coasts to survey the radioactivity of water, of sediments, and of sea flora and fauna. Through various programs and projects, researchers are developing always more refined models to simulate and predict the behaviour of radioactive releases in the sea, and their consequences. Beside, the IRSN intervenes as an expert, for example to assess whether there is radiological risk for workers and sea food when dredging sediments in the harbour of La Rochelle

  10. The Design and Implementation of the 2016 National Survey of Children's Health.

    Science.gov (United States)

    Ghandour, Reem M; Jones, Jessica R; Lebrun-Harris, Lydie A; Minnaert, Jessica; Blumberg, Stephen J; Fields, Jason; Bethell, Christina; Kogan, Michael D

    2018-05-09

    Introduction Since 2001, the Health Resources and Services Administration's Maternal and Child Health Bureau (HRSA MCHB) has funded and directed the National Survey of Children's Health (NSCH) and the National Survey of Children with Special Health Care Needs (NS-CSHCN), unique sources of national and state-level data on child health and health care. Between 2012 and 2015, HRSA MCHB redesigned the surveys, combining content into a single survey, and shifting from a periodic interviewer-assisted telephone survey to an annual self-administered web/paper-based survey utilizing an address-based sampling frame. Methods The U.S. Census Bureau fielded the redesigned NSCH using a random sample of addresses drawn from the Census Master Address File, supplemented with a unique administrative flag to identify households most likely to include children. Data were collected June 2016-February 2017 using a multi-mode design, encouraging web-based responses while allowing for paper mail-in responses. A parent/caregiver knowledgeable about the child's health completed an age-appropriate questionnaire. Experiments on incentives, branding, and contact strategies were conducted. Results Data were released in September 2017. The final sample size was 50,212 children; the overall weighted response rate was 40.7%. Comparison of 2016 estimates to those from previous survey iterations are not appropriate due to sampling and mode changes. Discussion The NSCH remains an invaluable data source for key measures of child health and attendant health care system, family, and community factors. The redesigned survey extended the utility of this resource while seeking a balance between previous strengths and innovations now possible.

  11. Corrosion at the head-neck interface of current designs of modular femoral components: essential questions and answers relating to corrosion in modular head-neck junctions.

    Science.gov (United States)

    Osman, K; Panagiotidou, A P; Khan, M; Blunn, G; Haddad, F S

    2016-05-01

    There is increasing global awareness of adverse reactions to metal debris and elevated serum metal ion concentrations following the use of second generation metal-on-metal total hip arthroplasties. The high incidence of these complications can be largely attributed to corrosion at the head-neck interface. Severe corrosion of the taper is identified most commonly in association with larger diameter femoral heads. However, there is emerging evidence of varying levels of corrosion observed in retrieved components with smaller diameter femoral heads. This same mechanism of galvanic and mechanically-assisted crevice corrosion has been observed in metal-on-polyethylene and ceramic components, suggesting an inherent biomechanical problem with current designs of the head-neck interface. We provide a review of the fundamental questions and answers clinicians and researchers must understand regarding corrosion of the taper, and its relevance to current orthopaedic practice. Cite this article: Bone Joint J 2016;98-B:579-84. ©2016 The British Editorial Society of Bone & Joint Surgery.

  12. Survey of control-room design practices with respect to human factors engineering

    International Nuclear Information System (INIS)

    Seminara, J.L.; Parsons, S.O.

    1980-01-01

    Human factors engineering is an interdisciplinary speciality concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. This emphasis has been applied to most military and space systems in the past 30 y. A review of five nuclear power-plant control rooms, reported in the November-December 1977 issue of Nuclear Safety, revealed that human factors principles of design have generally not been incorporated in present-generation control rooms. This article summarizes the findings of a survey of 20 control-board designers from a mix of nuclear steam-supply system and architect-engineering firms. The interviews with these designers probed design methods currently used in developing control rooms. From these data it was concluded that there is currently no consistent, formal, uniform concern for the human factors aspects of control-room design on the part of the design organizations, the utilities, or the Nuclear Regulatory Commission. Although all the parties involved are concerned with human factors issues, this responsibility is not focused, and human factors yardsticks, or design standards, specific to power plants have not been evolved and applied in the development and verification of control-room designs from the standpoint of the man-machine interface

  13. Creel survey sampling designs for estimating effort in short-duration Chinook salmon fisheries

    Science.gov (United States)

    McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

    2013-01-01

    Chinook Salmon Oncorhynchus tshawytscha sport fisheries in the Columbia River basin are commonly monitored using roving creel survey designs and require precise, unbiased catch estimates. The objective of this study was to examine the relative bias and precision of total catch estimates using various sampling designs to estimate angling effort under the assumption that mean catch rate was known. We obtained information on angling populations based on direct visual observations of portions of Chinook Salmon fisheries in three Idaho river systems over a 23-d period. Based on the angling population, Monte Carlo simulations were used to evaluate the properties of effort and catch estimates for each sampling design. All sampling designs evaluated were relatively unbiased. Systematic random sampling (SYS) resulted in the most precise estimates. The SYS and simple random sampling designs had mean square error (MSE) estimates that were generally half of those observed with cluster sampling designs. The SYS design was more efficient (i.e., higher accuracy per unit cost) than a two-cluster design. Increasing the number of clusters available for sampling within a day decreased the MSE of estimates of daily angling effort, but the MSE of total catch estimates was variable depending on the fishery. The results of our simulations provide guidelines on the relative influence of sample sizes and sampling designs on parameters of interest in short-duration Chinook Salmon fisheries.

  14. The Design and Validation of the Colorado Learning Attitudes about Science Survey

    Science.gov (United States)

    Adams, W. K.; Perkins, K. K.; Dubson, M.; Finkelstein, N. D.; Wieman, C. E.

    2005-09-01

    The Colorado Learning Attitudes about Science Survey (CLASS) is a new instrument designed to measure various facets of student attitudes and beliefs about learning physics. This instrument extends previous work by probing additional facets of student attitudes and beliefs. It has been written to be suitably worded for students in a variety of different courses. This paper introduces the CLASS and its design and validation studies, which include analyzing results from over 2400 students, interviews and factor analyses. Methodology used to determine categories and how to analyze the robustness of categories for probing various facets of student learning are also described. This paper serves as the foundation for the results and conclusions from the analysis of our survey data.

  15. Deep Extragalactic VIsible Legacy Survey (DEVILS): Motivation, Design and Target Catalogue

    Science.gov (United States)

    Davies, L. J. M.; Robotham, A. S. G.; Driver, S. P.; Lagos, C. P.; Cortese, L.; Mannering, E.; Foster, C.; Lidman, C.; Hashemizadeh, A.; Koushan, S.; O'Toole, S.; Baldry, I. K.; Bilicki, M.; Bland-Hawthorn, J.; Bremer, M. N.; Brown, M. J. I.; Bryant, J. J.; Catinella, B.; Croom, S. M.; Grootes, M. W.; Holwerda, B. W.; Jarvis, M. J.; Maddox, N.; Meyer, M.; Moffett, A. J.; Phillipps, S.; Taylor, E. N.; Windhorst, R. A.; Wolf, C.

    2018-06-01

    The Deep Extragalactic VIsible Legacy Survey (DEVILS) is a large spectroscopic campaign at the Anglo-Australian Telescope (AAT) aimed at bridging the near and distant Universe by producing the highest completeness survey of galaxies and groups at intermediate redshifts (0.3 < z < 1.0). Our sample consists of ˜60,000 galaxies to Y<21.2 mag, over ˜6 deg2 in three well-studied deep extragalactic fields (Cosmic Origins Survey field, COSMOS, Extended Chandra Deep Field South, ECDFS and the X-ray Multi-Mirror Mission Large-Scale Structure region, XMM-LSS - all Large Synoptic Survey Telescope deep-drill fields). This paper presents the broad experimental design of DEVILS. Our target sample has been selected from deep Visible and Infrared Survey Telescope for Astronomy (VISTA) Y-band imaging (VISTA Deep Extragalactic Observations, VIDEO and UltraVISTA), with photometry measured by PROFOUND. Photometric star/galaxy separation is done on the basis of NIR colours, and has been validated by visual inspection. To maximise our observing efficiency for faint targets we employ a redshift feedback strategy, which continually updates our target lists, feeding back the results from the previous night's observations. We also present an overview of the initial spectroscopic observations undertaken in late 2017 and early 2018.

  16. Survey of advanced radiation technologies used at designated cancer care hospitals in Japan

    International Nuclear Information System (INIS)

    Shikama, Naoto; Tsujino, Kayoko; Nakamura, Katsumasa; Ishikura, Satoshi

    2014-01-01

    Our survey assessed the use of advanced radiotherapy technologies at the designated cancer care hospitals in Japan, and we identified several issues to be addressed. We collected the data of 397 designated cancer care hospitals, including information on staffing in the department of radiation oncology (e.g. radiation oncologists, medical physicists and radiation therapists), the number of linear accelerators and the implementation of advanced radiotherapy technologies from the Center for Cancer Control and Information Services of the National Cancer Center, Japan. Only 53% prefectural designated cancer care hospitals and 16% regional designated cancer care hospitals have implemented intensity-modulated radiotherapy for head and neck cancers, and 62% prefectural designated cancer care hospitals and 23% regional designated cancer care hospitals use intensity-modulated radiotherapy for prostate cancer. Seventy-four percent prefectural designated cancer care hospitals and 40% regional designated cancer care hospitals employ stereotactic body radiotherapy for lung cancer. Our multivariate analysis of prefectural designated cancer care hospitals which satisfy the institute's qualifications for advanced technologies revealed the number of radiation oncologists (P=0.01) and that of radiation therapists (P=0.003) were significantly correlated with the implementation of intensity-modulated radiotherapy for prostate cancer, and the number of radiation oncologists (P=0.02) was correlated with the implementation of stereotactic body radiotherapy. There was a trend to correlate the number of medical physicists with the implementation of stereotactic body radiotherapy (P=0.07). Only 175 (51%) regional designated cancer care hospitals satisfy the institute's qualification of stereotactic body radiotherapy and 76 (22%) satisfy that of intensity-modulated radiotherapy. Seventeen percent prefectural designated cancer care hospitals and 13% regional designated cancer care hospitals

  17. Tools for Real-Time Control Systems Co-Design - A Survey

    OpenAIRE

    Henriksson, Dan; El-Khoury, Jad; Årzén, Karl-Erik; Törngren, Martin; Redell, Ola

    2005-01-01

    This report presents a survey of current simulation tools in the area of integrated control and real-time systems design. Each tool is presented with a quick overview followed by a more detailed section describing comparative aspects of the tool. These aspects describe the context and purpose of the tool (scenarios, development stages, activities, and qualities/constraints being addressed) and the actual tool technology (tool architecture, inputs, outputs, modeling content, extensibility and ...

  18. Robotic influence in the conceptual design of mechanical systems in space and vice versa - A survey

    Science.gov (United States)

    Sanger, George F.

    1988-01-01

    A survey of methods using robotic devices to construct structural elements in space is presented. Two approaches to robotic construction are considered: one in which the structural elements are designed using conventional aerospace techniques which tend to constrain the function aspects of robotics and one in which the structural elements are designed from the conceptual stage with built-in robotic features. Examples are presented of structural building concepts using robotics, including the construction of the SP-100 nuclear reactor power system, a multimirror large aperture IR space telescope concept, retrieval and repair in space, and the Flight Telerobotic Servicer.

  19. Trajectory Design to Mitigate Risk on the Transiting Exoplanet Survey Satellite (TESS) Mission

    Science.gov (United States)

    Dichmann, Donald

    2016-01-01

    The Transiting Exoplanet Survey Satellite (TESS) will employ a highly eccentric Earth orbit, in 2:1 lunar resonance, reached with a lunar flyby preceded by 3.5 phasing loops. The TESS mission has limited propellant and several orbit constraints. Based on analysis and simulation, we have designed the phasing loops to reduce delta-V and to mitigate risk due to maneuver execution errors. We have automated the trajectory design process and use distributed processing to generate and to optimize nominal trajectories, check constraint satisfaction, and finally model the effects of maneuver errors to identify trajectories that best meet the mission requirements.

  20. Structure analysis of designated hospitals for cancer control in Japan from JASTRO census survey database 2005

    International Nuclear Information System (INIS)

    Ikeda, Hiroshi; Kagami, Yoshikazu; Nishio, Masamichi; Kataoka, Masaaki; Matsumoto, Yasuo; Hatano, Kazuo; Ogino, Takashi

    2008-01-01

    The structures of 288 hospitals designated for cancer control and approved by Ministry of Health, Labour and Welfare in February 2006 were analyzed from radiotherapy aspects according to the Japanese Society for Therapeutic Radiology and Oncology (JASTRO) 2005 census survey data. The data were compiled from 266 hospitals. Overall 78,086 new patients were treated at these designated hospitals, which accounts for just a half the total number of patients in Japan. The structure of radiotherapy (RT) must be essential for cancer management, and our study showed the designated hospitals are insufficient in the RT requirement. No RT equipment is installed in 14 hospitals. Of 266, 109 hospitals treated less than 200 new patients, and 25 hospitals less than 100 in 2005. The data analysis revealed that academic hospitals, JACC hospitals and others are reasonable in terms of structures and capacity of radiotherapy. Moreover, both academic and JACC hospitals play similar roles to designated prefectural hospitals in cancer management by radiotherapy. (author)

  1. On a Modular Approach to the Design of Integrated Social Surveys

    Directory of Open Access Journals (Sweden)

    Ioannidis Evangelos

    2016-06-01

    Full Text Available This article considers a modular approach to the design of integrated social surveys. The approach consists of grouping variables into ‘modules’, each of which is then allocated to one or more ‘instruments’. Each instrument is then administered to a random sample of population units, and each sample unit responds to all modules of the instrument. This approach offers a way of designing a system of integrated social surveys that balances the need to limit the cost and the need to obtain sufficient information. The allocation of the modules to instruments draws on the methodology of split questionnaire designs. The composition of the instruments, that is, how the modules are allocated to instruments, and the corresponding sample sizes are obtained as a solution to an optimisation problem. This optimisation involves minimisation of respondent burden and data collection cost, while respecting certain design constraints usually encountered in practice. These constraints may include, for example, the level of precision required and dependencies between the variables. We propose using a random search algorithm to find approximate optimal solutions to this problem. The algorithm is proved to fulfil conditions that ensure convergence to the global optimum and can also produce an efficient design for a split questionnaire.

  2. Japanese structure survey of radiation oncology in 2007 with special reference to designated cancer care hospitals

    International Nuclear Information System (INIS)

    Numasaki, Hodaka; Shibuya, Hitoshi; Nishio, Masamichi

    2011-01-01

    Background and Purpose: The structure of radiation oncology in designated cancer care hospitals in Japan was investigated in terms of equipment, personnel, patient load, and geographic distribution. The effect of changes in the health care policy in Japan on radiotherapy structure was also examined. Material and Methods: The Japanese Society of Therapeutic Radiology and Oncology surveyed the national structure of radiation oncology in 2007. The structures of 349 designated cancer care hospitals and 372 other radiotherapy facilities were compared. Results: Respective findings for equipment and personnel at designated cancer care hospitals and other facilities included the following: linear accelerators/facility: 1.3 and 1.0; annual patients/linear accelerator: 296.5 and 175.0; and annual patient load/full-time equivalent radiation oncologist was 237.0 and 273.3, respectively. Geographically, the number of designated cancer care hospitals was associated with population size. Conclusion: The structure of radiation oncology in Japan in terms of equipment, especially for designated cancer care hospitals, was as mature as that in European countries and the United States, even though the medical costs in relation to GDP in Japan are lower. There is still a shortage of manpower. The survey data proved to be important to fully understand the radiation oncology medical care system in Japan. (orig.)

  3. Survey on Cooled-Vessel Designs in High Temperature Gas-Cooled Reactors

    International Nuclear Information System (INIS)

    Kim, Min-Hwan; Lee, Won-Jae

    2006-01-01

    The core outlet temperature of the coolant in the high temperature gas-cooled reactors (HTGR) has been increased to improve the overall efficiency of their electricity generation by using the Brayton cycle or their nuclear hydrogen production by using thermo-chemical processes. The increase of the outlet temperature accompanies an increase of the coolant inlet temperature. A high coolant inlet temperature results in an increase of the reactor pressure vessel (RPV) operation temperature. The conventional steels, proven vessel material in light water reactors, cannot be used as materials for the RPV in the elevated temperatures which necessitate its design to account for the creep effects. Some ferritic or martensitic steels like 2 1/4Cr-1Mo and 9Cr-1Mo-V are very well established creep resistant materials for a temperature range of 400 to 550 C. Although these materials have been used in a chemical plant, there is limited experience with using these materials in nuclear reactors. Even though the 2 1/4Cr-1Mo steel was used to manufacture the RPV for HTR-10 of Japan Atomic Energy Agency(JAEA), a large RPV has not been manufactured by using this material or 9Cr-1Mo-V steel. Due to not only its difficulties in manufacturing but also its high cost, the JAEA determined that they would exclude these materials from the GTHTR design. For the above reasons, KAERI has been considering a cooled-vessel design as an option for the RPV design of a NHDD plant (Nuclear Hydrogen Development and Demonstration). In this study, we surveyed several HTGRs, which adopt the cooled-vessel concept for their RPV design, and discussed their design characteristics. The survey results in design considerations for the NHDD cooled-vessel design

  4. Survey of customer expectation and satisfaction: preliminary research of a modular product design approach for sheep cage design

    Directory of Open Access Journals (Sweden)

    Rochman Yuli Agusti

    2018-01-01

    Full Text Available This study aims to produce a modular sheep cage design. Feeding, maintenance and integrated waste management are taking into account in the design. The modular and integrated product design provides advantages such as (1 easy way of making and modifying the product, (2 enabling the utilization of existing facilities such as shade, (3 giving the user a sense of convenience as the waste can be processed and not being a source of pollution. The Modular Quality Function Deployment (QFD method is applied to identify modules associated with the customer needs of the product. A survey about customer expectation and satisfaction was conducted in order to evaluate the gap of both. The highest value of gap between customer expectation and satisfaction of products indicates that the customer needs are the focus of the problems. The most important customer needs are considered in modification and improvement of design. These are (1 the cage is not easy to fall down, (2 the sheep cage can last for long time, (3 it uses a strong frame, (4 the roof section materials is not easy to leak, and (5 It can be used even if one part of the cage is damaged.

  5. On the comprehensibility and perceived privacy protection of indirect questioning techniques.

    Science.gov (United States)

    Hoffmann, Adrian; Waubert de Puiseau, Berenike; Schmidt, Alexander F; Musch, Jochen

    2017-08-01

    On surveys that assess sensitive personal attributes, indirect questioning aims at increasing respondents' willingness to answer truthfully by protecting confidentiality. However, the assumption that subjects understand questioning procedures fully and trust them to protect their privacy is rarely tested. In a scenario-based design, we compared four indirect questioning procedures in terms of their comprehensibility and perceived privacy protection. All indirect questioning techniques were found to be less comprehensible by respondents than a conventional direct question used for comparison. Less-educated respondents experienced more difficulties when confronted with any indirect questioning technique. Regardless of education, the crosswise model was found to be the most comprehensible among the four indirect methods. Indirect questioning in general was perceived to increase privacy protection in comparison to a direct question. Unexpectedly, comprehension and perceived privacy protection did not correlate. We recommend assessing these factors separately in future evaluations of indirect questioning.

  6. TEACHING DESCRIPTIVE READING BY USING SURVEY, QUESTION, READ, WRITE AND (SQRW STRATEGY TO THE TENTH GRADE STUDENTS OF SMA MUHAMMADIYAH 1 PALEMBANG

    Directory of Open Access Journals (Sweden)

    marlen rahmawati

    2017-05-01

    Full Text Available The objectives of this study are to find out whether or not there is a significant improvement before and after the treatment on the tenth grade students’ reading comprehension scores of SMA Muhammadiyah 1 Palembang by using SQRW strategy and to find out whether or not there is a significant difference on the tenth grade students’ reading comprehension scores of SMA Muhammadiyah 1 Palembang between the students who are taught by using SQRW strategy and those who are not. This study used quasi-experimental design using nonequivalent pretest-posttest design. There were 68 students from class X MIPA 4 and X MIPA 6 chosen as the sample. In collecting the data, test was used. The test was given twice to experimental and control groups, for pretest and posttest. To verify the hypotheses, the data of pretest and posttest were analyzed by using independent sample t-test and paired sample t-test in SPSS 18 program. The findings showed that the p-output from paired sample t-test (sig2-tailed was 0.000 which was lower than 0.05, and t-value 11.294 was higher than t-table (34-1 with df=33 (2.034. The result of p-output from independent sample t-test was 0.003 which was lower that 0.05 and the t-value 3.104 was higher than t-table (68-2 with df=66 (1.996. Therefore it could be stated that teaching reading descriptive text by using SQRW strategy had significant improvement and showed significant difference on the students’ reading comprehension scores.

  7. Rhetorical questions or rhetorical uses of questions?

    Directory of Open Access Journals (Sweden)

    Špago Džemal

    2016-12-01

    Full Text Available This paper aims to explore whether some rhetorical questions contain certain linguistic elements or forms which would differentiate them from answer-eliciting and action-eliciting questions, and thereby hint at their rhetorical nature even outside the context. Namely, despite the fact that the same questions can be rhetorical in one context, and answer-eliciting in another, some of them are more likely to be associated with rhetorical or non-rhetorical use. The analysis is based on extensive data (over 1200 examples of rhetorical questions taken from 30 plays by two British and two American writers, and the results are expected to give an insight into whether we can talk about rhetorical questions or just a rhetorical use of questions.

  8. Literature survey, numerical examples, and recommended design studies for main-coolant pumps. Final report

    International Nuclear Information System (INIS)

    Allaire, P.E.; Barrett, L.E.

    1982-06-01

    This report presents an up-to-date literature survey, examples of calculations of seal forces or other pump properties, and recommendations for future work pertaining to primary coolant pumps and primary recirculating pumps in the nuclear power industry. Five main areas are covered: pump impeller forces, fluid annuli, bearings, seals, and rotor calculations. The main conclusion is that forces in pump impellers is perhaps the least well understood area, seals have had some good design work done on them recently, fluid annuli effects are being discussed in the literature, bearing designs are fairly well known, and rotor calculations have been discussed widely in the literature. It should be noted, however, that usually the literature in a given area is not applied to pumps in nuclear power stations. The most immediate need for a combined theoretical and experimental design capability exists in mechanical face seals

  9. Listening to firms : how to use firm-level surveys to assess constraints on private sector development

    OpenAIRE

    Stone, Andrew H.W.

    1992-01-01

    Firm-level surveys elicit information important to formulating sound policy advice and designing projects to promote private sector development. Drawing on recent World Bank experience in eight countries, the author advises why and how to implement targeted field surveys by answering the following questions: Why use targeted field surveys? How should surveys be focused and designed? What types of questions work best in surveys? How can surveys be oriented toward their target population? How s...

  10. Design and Reproducibility of a Mini-Survey to Evaluate the Quality of Food Intake (Mini-ECCA in a Mexican Population

    Directory of Open Access Journals (Sweden)

    María Fernanda Bernal-Orozco

    2018-04-01

    Full Text Available Evaluating food intake quality may contribute to the development of nutrition programs. In Mexico, there are no screening tools that can be administered quickly for the evaluation of this variable. The aim was to determine the reproducibility of a mini-survey designed to evaluate the quality of food intake (Mini-ECCA in a Mexican population. Mini-ECCA consists of 12 questions that are based on Mexican and international recommendations for food and non-alcoholic beverage intake, with the support of photographs for food quantity estimation. Each question scores as 0 (unhealthy or 1 (healthy, and the final score undergoes a classification procedure. Through the framework of a nutritional study, 152 employees of the municipal water company in Guadalajara, Mexico (April–August 2016, were invited to participate. The survey was administered in two rounds (test and retest with a 15-day interval between them. We calculated the Spearman correlation coefficient, the intra-class correlation coefficient (ICC, and weighted kappa for score classification agreement (SPSS versus 14 p < 0.05 was considered statistically significant. The survey obtained a “good” reproducibility (ρ = 0.713, p < 0.001, and an excellent concordance (ICC = 0.841 Confidence Interval 95% 0.779, 0.885. It can thus be said that the Mini-ECCA displayed acceptable reproducibility and is suitable for the purpose of dietary assessment and guidance.

  11. Equity in Microscale Urban Design and Walkability: A Photographic Survey of Six Pittsburgh Streetscapes

    Directory of Open Access Journals (Sweden)

    Bradley Bereitschaft

    2017-07-01

    Full Text Available This paper explores inequity in neighborhood walkability at the micro-scale level by qualitatively examining six streetscapes in Pittsburgh, Pennsylvania. A photographic survey is used to highlight differences in the quality and design of the built environment among pairs of streetscapes with high or low social vulnerability but approximately equal quantitative Walk Scores®. The survey revealed discernable differences in the quality and maintenance of the built environment among those in more and less disadvantaged neighborhoods. This was true of several characteristics expected to affect walkability, including enclosure, transparency, complexity, and tidiness. Streetscapes in neighborhoods with high social vulnerability exhibited less contiguous street walls, fewer windows and less transparent storefronts, less well maintained infrastructure, fewer street cafés, and overall less complexity than those in neighborhoods with low social vulnerability. Implications for planning and policy are discussed.

  12. [Design and implementation of mobile terminal data acquisition for Chinese materia medica resources survey].

    Science.gov (United States)

    Qi, Yuan-Hua; Wang, Hui; Zhang, Xiao-Bo; Jin, Yan; Ge, Xiao-Guang; Jing, Zhi-Xian; Wang, Ling; Zhao, Yu-Ping; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    In this paper, a data acquisition system based on mobile terminal combining GPS, offset correction, automatic speech recognition and database networking technology was designed implemented with the function of locating the latitude and elevation information fast, taking conveniently various types of Chinese herbal plant photos, photos, samples habitat photos and so on. The mobile system realizes automatic association with Chinese medicine source information, through the voice recognition function it records the information of plant characteristics and environmental characteristics, and record relevant plant specimen information. The data processing platform based on Chinese medicine resources survey data reporting client can effectively assists in indoor data processing, derives the mobile terminal data to computer terminal. The established data acquisition system provides strong technical support for the fourth national survey of the Chinese materia medica resources (CMMR). Copyright© by the Chinese Pharmaceutical Association.

  13. Design of the South East Asian Nutrition Survey (SEANUTS): a four-country multistage cluster design study.

    Science.gov (United States)

    Schaafsma, Anne; Deurenberg, Paul; Calame, Wim; van den Heuvel, Ellen G H M; van Beusekom, Christien; Hautvast, Jo; Sandjaja; Bee Koon, Poh; Rojroongwasinkul, Nipa; Le Nguyen, Bao Khanh; Parikh, Panam; Khouw, Ilse

    2013-09-01

    Nutrition is a well-known factor in the growth, health and development of children. It is also acknowledged that worldwide many people have dietary imbalances resulting in over- or undernutrition. In 2009, the multinational food company FrieslandCampina initiated the South East Asian Nutrition Survey (SEANUTS), a combination of surveys carried out in Indonesia, Malaysia, Thailand and Vietnam, to get a better insight into these imbalances. The present study describes the general study design and methodology, as well as some problems and pitfalls encountered. In each of these countries, participants in the age range of 0·5-12 years were recruited according to a multistage cluster randomised or stratified random sampling methodology. Field teams took care of recruitment and data collection. For the health status of children, growth and body composition, physical activity, bone density, and development and cognition were measured. For nutrition, food intake and food habits were assessed by questionnaires, whereas in subpopulations blood and urine samples were collected to measure the biochemical status parameters of Fe, vitamins A and D, and DHA. In Thailand, the researchers additionally studied the lipid profile in blood, whereas in Indonesia iodine excretion in urine was analysed. Biochemical data were analysed in certified laboratories. Study protocols and methodology were aligned where practically possible. In December 2011, data collection was finalised. In total, 16,744 children participated in the present study. Information that will be very relevant for formulating nutritional health policies, as well as for designing innovative food and nutrition research and development programmes, has become available.

  14. Nuclear questions; Le nucleaire en questions

    Energy Technology Data Exchange (ETDEWEB)

    Berg, Eugene

    2012-02-15

    Civilian and military nuclear questions fill a multitude of publications these days, especially after the Japanese tsunami and the Fukushima disaster. The author analyses some of them and highlights the links between civil and military nuclear industries, the realities of the nuclear cycle and related industrial questions before concluding on the controversial issue of weapons and their proliferation potential

  15. Sampling effects on the identification of roadkill hotspots: Implications for survey design.

    Science.gov (United States)

    Santos, Sara M; Marques, J Tiago; Lourenço, André; Medinas, Denis; Barbosa, A Márcia; Beja, Pedro; Mira, António

    2015-10-01

    Although locating wildlife roadkill hotspots is essential to mitigate road impacts, the influence of study design on hotspot identification remains uncertain. We evaluated how sampling frequency affects the accuracy of hotspot identification, using a dataset of vertebrate roadkills (n = 4427) recorded over a year of daily surveys along 37 km of roads. "True" hotspots were identified using this baseline dataset, as the 500-m segments where the number of road-killed vertebrates exceeded the upper 95% confidence limit of the mean, assuming a Poisson distribution of road-kills per segment. "Estimated" hotspots were identified likewise, using datasets representing progressively lower sampling frequencies, which were produced by extracting data from the baseline dataset at appropriate time intervals (1-30 days). Overall, 24.3% of segments were "true" hotspots, concentrating 40.4% of roadkills. For different groups, "true" hotspots accounted from 6.8% (bats) to 29.7% (small birds) of road segments, concentrating from 60% (lizards, lagomorphs, carnivores) of roadkills. Spatial congruence between "true" and "estimated" hotspots declined rapidly with increasing time interval between surveys, due primarily to increasing false negatives (i.e., missing "true" hotspots). There were also false positives (i.e., wrong "estimated" hotspots), particularly at low sampling frequencies. Spatial accuracy decay with increasing time interval between surveys was higher for smaller-bodied (amphibians, reptiles, small birds, small mammals) than for larger-bodied species (birds of prey, hedgehogs, lagomorphs, carnivores). Results suggest that widely used surveys at weekly or longer intervals may produce poor estimates of roadkill hotspots, particularly for small-bodied species. Surveying daily or at two-day intervals may be required to achieve high accuracy in hotspot identification for multiple species. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Optimal sampling designs for large-scale fishery sample surveys in Greece

    Directory of Open Access Journals (Sweden)

    G. BAZIGOS

    2007-12-01

    The paper deals with the optimization of the following three large scale sample surveys: biological sample survey of commercial landings (BSCL, experimental fishing sample survey (EFSS, and commercial landings and effort sample survey (CLES.

  17. Survey of injury sources for a trampoline with equipment hazards designed out.

    Science.gov (United States)

    Eager, David; Scarrott, Carl; Nixon, Jim; Alexander, Keith

    2012-07-01

    In Australia, trampolines contribute approximately one-quarter of all childhood play-equipment injuries. The purpose of this study was to gather and evaluate injury data from a nontraditional, 'soft-edged', consumer trampoline in which the equipment injury sources have been designed out. A survey was undertaken in Queensland and New South Wales. The manufacturer of the nontraditional trampoline provided the University of Technology, Sydney, with their Australian customer database. Injury data were gathered in a pilot study by phone interview, then in a full study through an email survey. Results from 3817 respondents were compared with earlier Australian and US data from traditional trampolines gathered from emergency departments.   A significantly lower proportion of the injuries caused by falling off or striking the equipment was found for this new design when compared with traditional trampolines both in Australia and in the USA. The age of children being injured on trampolines in Australia was found to be markedly lower than in North America. This research indicates that with appropriate design the more severe injuries on traditional trampolines can be significantly reduced. © 2012 The Authors. Journal of Paediatrics and Child Health © 2012 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  18. Injury survey of a non-traditional 'soft-edged' trampoline designed to lower equipment hazards.

    Science.gov (United States)

    Eager, David B; Scarrott, Carl; Nixon, Jim; Alexander, Keith

    2013-01-01

    In Australia trampolines contribute one quarter of all childhood play equipment injuries. The objective of this study was to gather and evaluate injury data from a non-traditional, 'soft-edged', consumer trampoline, where the design aimed to minimise injuries from the equipment and from falling off. The manufacturer of the non-traditional trampoline provided the University of Technology Sydney with their Australian customer database. The study involved surveys in Queensland and New South Wales, between May 2007 and March 2010. Initially injury data was gathered by a phone interview pilot study, then in the full study, through an email survey. The 3817 respondents were the carers of child users of the 'soft-edge' trampolines. Responses were compared with Australian and US emergency department data. In both countries the proportion of injuries caused by the equipment and falling off was compared with the proportion caused by the jumpers to themselves or each other. The comparisons showed a significantly lower proportion resulted from falling-off or hitting the equipment for this design when compared to traditional trampolines, both in Australia and the US. This research concludes that equipment-induced and falling-off injuries, the more severe injuries on traditional trampolines, can be significantly reduced with appropriate trampoline design.

  19. A Life in the Universe Survey

    Science.gov (United States)

    LoPresto, Michael C.; Hubble-Zdanowski, Jennifer

    2012-01-01

    The "Life in the Universe Survey" is a twelve-question assessment instrument. Largely based on the factors of the Drake equation, it is designed to survey students' initial estimates of its factors and to gauge how estimates change with instruction. The survey was used in sections of a seminar course focusing specifically on life in the universe…

  20. Designing, Testing, and Validating an Attitudinal Survey on an Environmental Topic: A Groundwater Pollution Survey Instrument for Secondary School Students

    Science.gov (United States)

    Lacosta-Gabari, Idoya; Fernandez-Manzanal, Rosario; Sanchez-Gonzalez, Dolores

    2009-01-01

    Research in environmental attitudes' assessment has significantly increased in recent years. The development of specific attitude scales for specific environmental problems has often been proposed. This paper describes the Groundwater Pollution Test (GPT), a 19-item survey instrument using a Likert-type scale. The survey has been used with…

  1. Requirements and concept design for large earth survey telescope for SEOS

    Science.gov (United States)

    Mailhot, P.; Bisbee, J.

    1975-01-01

    The efforts of a one year program of Requirements Analysis and Conceptual Design for the Large Earth Survey Telescope for the Synchronous Earth Observatory Satellite is summarized. A 1.4 meter aperture Cassegrain telescope with 0.6 deg field of view is shown to do an excellent job in satisfying the observational requirements for a wide range of earth resources and meteorological applications. The telescope provides imagery or thermal mapping in ten spectral bands at one time in a field sharing grouping of linear detector arrays. Pushbroom scanning is accomplished by spacecraft slew.

  2. Questionnaire survey of customer satisfaction for product categories towards certification of ergonomic quality in design.

    Science.gov (United States)

    Mochimaru, Masaaki; Takahashi, Miwako; Hatakenaka, Nobuko; Horiuchi, Hitoshi

    2012-01-01

    Customer satisfaction was surveyed for 6 product categories (consumer electronics, daily commodities, home equipment, information systems, cars, and health appliances) by questionnaires based on the Analytic Hierarchy Process. Analyzing weight of evaluation factors, the 6 product categories were reorganized into 4 categories, those were related to 4 aspects in daily living that formed by two axes: home living - mobility life and healthy life - active communication. It was found that consumers were attracted by the actual user test by public institutes for all product categories. The certification based on the design process standard established by authorities, such as EQUID was the second best attractor for consumers.

  3. Recommended survey designs for occupancy modelling using motion-activated cameras: insights from empirical wildlife data

    Directory of Open Access Journals (Sweden)

    Graeme Shannon

    2014-08-01

    Full Text Available Motion-activated cameras are a versatile tool that wildlife biologists can use for sampling wild animal populations to estimate species occurrence. Occupancy modelling provides a flexible framework for the analysis of these data; explicitly recognizing that given a species occupies an area the probability of detecting it is often less than one. Despite the number of studies using camera data in an occupancy framework, there is only limited guidance from the scientific literature about survey design trade-offs when using motion-activated cameras. A fuller understanding of these trade-offs will allow researchers to maximise available resources and determine whether the objectives of a monitoring program or research study are achievable. We use an empirical dataset collected from 40 cameras deployed across 160 km2 of the Western Slope of Colorado, USA to explore how survey effort (number of cameras deployed and the length of sampling period affects the accuracy and precision (i.e., error of the occupancy estimate for ten mammal and three virtual species. We do this using a simulation approach where species occupancy and detection parameters were informed by empirical data from motion-activated cameras. A total of 54 survey designs were considered by varying combinations of sites (10–120 cameras and occasions (20–120 survey days. Our findings demonstrate that increasing total sampling effort generally decreases error associated with the occupancy estimate, but changing the number of sites or sampling duration can have very different results, depending on whether a species is spatially common or rare (occupancy = ψ and easy or hard to detect when available (detection probability = p. For rare species with a low probability of detection (i.e., raccoon and spotted skunk the required survey effort includes maximizing the number of sites and the number of survey days, often to a level that may be logistically unrealistic for many studies. For common

  4. A Survey of a System of Methods for Fire Safety Design of Traditional Concrete Constructions

    DEFF Research Database (Denmark)

    Hertz, Kristian

    2000-01-01

    constructions DS411. And the bases for many of the methods have been distributed by CIB W14 reports. But a survey of all the methods in coherence has never been presented, and much of this documentation and the additional documentation produced for the work with the codes needs still to be printed in papers......During the years since 1978 the author has been developing a series of calculation methods and sup-porting test methods for the fire safety design of concrete constructions. The basic methods have been adopted in the fire chapters of the Eurocode ENV1992-1-2 and the Danish code for concrete.......It is the aim of this paper to give a coherent presentation of the design methods, their degree of documentation and the available references in order to facilitate the application of them....

  5. Trajectory Design Enhancements to Mitigate Risk for the Transiting Exoplanet Survey Satellite (TESS)

    Science.gov (United States)

    Dichmann, Donald; Parker, Joel; Nickel, Craig; Lutz, Stephen

    2016-01-01

    The Transiting Exoplanet Survey Satellite (TESS) will employ a highly eccentric Earth orbit, in 2:1 lunar resonance, which will be reached with a lunar flyby preceded by 3.5 phasing loops. The TESS mission has limited propellant and several constraints on the science orbit and on the phasing loops. Based on analysis and simulation, we have designed the phasing loops to reduce delta-V (DV) and to mitigate risk due to maneuver execution errors. We have automated the trajectory design process and use distributed processing to generate and optimal nominal trajectories; to check constraint satisfaction; and finally to model the effects of maneuver errors to identify trajectories that best meet the mission requirements.

  6. Workshop Synthesis: Stated Preference Surveys and Experimental Design, an Audit of the Journey so far and Future Research Perspectives

    DEFF Research Database (Denmark)

    Cherchi, Elisabetta; Hensher, David A.

    2015-01-01

    This paper is a synthesis of the discussions and ideas that were generated during the workshop on “Stated preference surveys and experimental design” at the 2014 Travel Survey Methods Conference in Leura (Australia). The workshop addressed the challenges related to the design and implementation o...

  7. THE DEEP2 GALAXY REDSHIFT SURVEY: DESIGN, OBSERVATIONS, DATA REDUCTION, AND REDSHIFTS

    International Nuclear Information System (INIS)

    Newman, Jeffrey A.; Cooper, Michael C.; Davis, Marc; Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Harker, Justin J.; Lai, Kamson; Coil, Alison L.; Dutton, Aaron A.; Finkbeiner, Douglas P.; Gerke, Brian F.; Rosario, David J.; Weiner, Benjamin J.; Willmer, C. N. A.; Yan Renbin; Kassin, Susan A.; Konidaris, N. P.

    2013-01-01

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z ∼ 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude M B = –20 at z ∼ 1 via ∼90 nights of observation on the Keck telescope. The survey covers an area of 2.8 deg 2 divided into four separate fields observed to a limiting apparent magnitude of R AB = 24.1. Objects with z ∼ 0.7 to be targeted ∼2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z ∼ 1.45, where the [O II] 3727 Å doublet lies in the infrared. The DEIMOS 1200 line mm –1 grating used for the survey delivers high spectral resolution (R ∼ 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or other artifacts that in some cases remain after data reduction. Redshift errors and catastrophic failure rates are assessed through more than 2000 objects with duplicate

  8. Factors controlling volume errors through 2D gully erosion assessment: guidelines for optimal survey design

    Science.gov (United States)

    Castillo, Carlos; Pérez, Rafael

    2017-04-01

    The assessment of gully erosion volumes is essential for the quantification of soil losses derived from this relevant degradation process. Traditionally, 2D and 3D approaches has been applied for this purpose (Casalí et al., 2006). Although innovative 3D approaches have recently been proposed for gully volume quantification, a renewed interest can be found in literature regarding the useful information that cross-section analysis still provides in gully erosion research. Moreover, the application of methods based on 2D approaches can be the most cost-effective approach in many situations such as preliminary studies with low accuracy requirements or surveys under time or budget constraints. The main aim of this work is to examine the key factors controlling volume error variability in 2D gully assessment by means of a stochastic experiment involving a Monte Carlo analysis over synthetic gully profiles in order to 1) contribute to a better understanding of the drivers and magnitude of gully erosion 2D-surveys uncertainty and 2) provide guidelines for optimal survey designs. Owing to the stochastic properties of error generation in 2D volume assessment, a statistical approach was followed to generate a large and significant set of gully reach configurations to evaluate quantitatively the influence of the main factors controlling the uncertainty of the volume assessment. For this purpose, a simulation algorithm in Matlab® code was written, involving the following stages: - Generation of synthetic gully area profiles with different degrees of complexity (characterized by the cross-section variability) - Simulation of field measurements characterised by a survey intensity and the precision of the measurement method - Quantification of the volume error uncertainty as a function of the key factors In this communication we will present the relationships between volume error and the studied factors and propose guidelines for 2D field surveys based on the minimal survey

  9. The Foundation Supernova Survey: motivation, design, implementation, and first data release

    Science.gov (United States)

    Foley, Ryan J.; Scolnic, Daniel; Rest, Armin; Jha, S. W.; Pan, Y.-C.; Riess, A. G.; Challis, P.; Chambers, K. C.; Coulter, D. A.; Dettman, K. G.; Foley, M. M.; Fox, O. D.; Huber, M. E.; Jones, D. O.; Kilpatrick, C. D.; Kirshner, R. P.; Schultz, A. S. B.; Siebert, M. R.; Flewelling, H. A.; Gibson, B.; Magnier, E. A.; Miller, J. A.; Primak, N.; Smartt, S. J.; Smith, K. W.; Wainscoat, R. J.; Waters, C.; Willman, M.

    2018-03-01

    The Foundation Supernova Survey aims to provide a large, high-fidelity, homogeneous, and precisely calibrated low-redshift Type Ia supernova (SN Ia) sample for cosmology. The calibration of the current low-redshift SN sample is the largest component of systematic uncertainties for SN cosmology, and new data are necessary to make progress. We present the motivation, survey design, observation strategy, implementation, and first results for the Foundation Supernova Survey. We are using the Pan-STARRS telescope to obtain photometry for up to 800 SNe Ia at z ≲ 0.1. This strategy has several unique advantages: (1) the Pan-STARRS system is a superbly calibrated telescopic system, (2) Pan-STARRS has observed 3/4 of the sky in grizyP1 making future template observations unnecessary, (3) we have a well-tested data-reduction pipeline, and (4) we have observed ˜3000 high-redshift SNe Ia on this system. Here, we present our initial sample of 225 SN Ia grizP1 light curves, of which 180 pass all criteria for inclusion in a cosmological sample. The Foundation Supernova Survey already contains more cosmologically useful SNe Ia than all other published low-redshift SN Ia samples combined. We expect that the systematic uncertainties for the Foundation Supernova Sample will be two to three times smaller than other low-redshift samples. We find that our cosmologically useful sample has an intrinsic scatter of 0.111 mag, smaller than other low-redshift samples. We perform detailed simulations showing that simply replacing the current low-redshift SN Ia sample with an equally sized Foundation sample will improve the precision on the dark energy equation-of-state parameter by 35 per cent, and the dark energy figure of merit by 72 per cent.

  10. Dealing with trade-offs in destructive sampling designs for occupancy surveys.

    Directory of Open Access Journals (Sweden)

    Stefano Canessa

    Full Text Available Occupancy surveys should be designed to minimise false absences. This is commonly achieved by increasing replication or increasing the efficiency of surveys. In the case of destructive sampling designs, in which searches of individual microhabitats represent the repeat surveys, minimising false absences leads to an inherent trade-off. Surveyors can sample more low quality microhabitats, bearing the resultant financial costs and producing wider-spread impacts, or they can target high quality microhabitats were the focal species is more likely to be found and risk more severe impacts on local habitat quality. We show how this trade-off can be solved with a decision-theoretic approach, using the Millewa Skink Hemiergis millewae from southern Australia as a case study. Hemiergis millewae is an endangered reptile that is best detected using destructive sampling of grass hummocks. Within sites that were known to be occupied by H. millewae, logistic regression modelling revealed that lizards were more frequently detected in large hummocks. If this model is an accurate representation of the detection process, searching large hummocks is more efficient and requires less replication, but this strategy also entails destruction of the best microhabitats for the species. We developed an optimisation tool to calculate the minimum combination of the number and size of hummocks to search to achieve a given cumulative probability of detecting the species at a site, incorporating weights to reflect the sensitivity of the results to a surveyor's priorities. The optimisation showed that placing high weight on minimising volume necessitates impractical replication, whereas placing high weight on minimising replication requires searching very large hummocks which are less common and may be vital for H. millewae. While destructive sampling methods are sometimes necessary, surveyors must be conscious of the ecological impacts of these methods. This study provides a

  11. A question of emphasis

    DEFF Research Database (Denmark)

    Almarsdóttir, Anna Birna; Morgall, Janine Marie; Björnsdóttir, I

    2000-01-01

    of pharmaceuticals? Seven focus group discussions were conducted with pharmacy customers in different locations in May, August and October 1997. Widespread ignorance about the legislation was observed. Pharmacy customers preferred to discuss the role of physicians in 'irrational drug use' to discussing community...... pharmacies. A definite split was observed between urban and rural pharmacy customers; whereas definite changes were reported in the urban setting (lower prices and increased access), the rural population's perception is that it is being left out. Although the study design is not generalisable, it is clear......The reported results are part of the overall evaluation of the new drug distribution legislation that went into effect in March 1996, liberalising ownership of community pharmacies in Iceland. We addressed the following question: What impact did the legislation have on users' access to and costs...

  12. A survey on the human reliability analysis methods for the design of Korean next generation reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Hee; Lee, J. W.; Park, J. C.; Kwack, H. Y.; Lee, K. Y.; Park, J. K.; Kim, I. S.; Jung, K. W

    2000-03-01

    Enhanced features through applying recent domestic technologies may characterize the safety and efficiency of KNGR(Korea Next Generation Reactor). Human engineered interface and control room environment are expected to be beneficial to the human aspects of KNGR design. However, since the current method for human reliability analysis is not up to date after THERP/SHARP, it becomes hard to assess the potential of human errors due to both of the positive and negative effect of the design changes in KNGR. This is a state of the art report on the human reliability analysis methods that are potentially available for the application to the KNGR design. We surveyed every technical aspects of existing HRA methods, and compared them in order to obtain the requirements for the assessment of human error potentials within KNGR design. We categorized the more than 10 methods into the first and the second generation according to the suggestion of Dr. Hollnagel. THERP was revisited in detail. ATHEANA proposed by US NRC for an advanced design and CREAM proposed by Dr. Hollnagel were reviewed and compared. We conclude that the key requirements might include the enhancement in the early steps for human error identification and the quantification steps with considerations of more extended error shaping factors over PSFs(performance shaping factors). The utilization of the steps and approaches of ATHEANA and CREAM will be beneficial to the attainment of an appropriate HRA method for KNGR. However, the steps and data from THERP will be still maintained because of the continuity with previous PSA activities in KNGR design.

  13. A survey on the human reliability analysis methods for the design of Korean next generation reactor

    International Nuclear Information System (INIS)

    Lee, Yong Hee; Lee, J. W.; Park, J. C.; Kwack, H. Y.; Lee, K. Y.; Park, J. K.; Kim, I. S.; Jung, K. W.

    2000-03-01

    Enhanced features through applying recent domestic technologies may characterize the safety and efficiency of KNGR(Korea Next Generation Reactor). Human engineered interface and control room environment are expected to be beneficial to the human aspects of KNGR design. However, since the current method for human reliability analysis is not up to date after THERP/SHARP, it becomes hard to assess the potential of human errors due to both of the positive and negative effect of the design changes in KNGR. This is a state of the art report on the human reliability analysis methods that are potentially available for the application to the KNGR design. We surveyed every technical aspects of existing HRA methods, and compared them in order to obtain the requirements for the assessment of human error potentials within KNGR design. We categorized the more than 10 methods into the first and the second generation according to the suggestion of Dr. Hollnagel. THERP was revisited in detail. ATHEANA proposed by US NRC for an advanced design and CREAM proposed by Dr. Hollnagel were reviewed and compared. We conclude that the key requirements might include the enhancement in the early steps for human error identification and the quantification steps with considerations of more extended error shaping factors over PSFs(performance shaping factors). The utilization of the steps and approaches of ATHEANA and CREAM will be beneficial to the attainment of an appropriate HRA method for KNGR. However, the steps and data from THERP will be still maintained because of the continuity with previous PSA activities in KNGR design

  14. The Question Complexity Rubric: Development and Application for a National Archive of Astro 101 Multiple-Choice Questions

    Science.gov (United States)

    Cormier, Sebastien; Prather, E. E.; Brissenden, G.; Collaboration of Astronomy Teaching Scholars CATS

    2011-01-01

    For the last two years we have been developing an online national archive of multiple-choice questions for use in the Astro 101 classroom. These questions are intended to either supplement an instructor's implementation of Think-Pair-Share or be used for assessment purposes (i.e. exams and homework). In this talk we will describe the development, testing and implementation of the Question Complexity Rubric (QCR), which is designed to guide the ranking of questions in this archive based on their conceptual complexity. Using the QCR, a score is assigned to differentiate each question based on the cognitive steps necessary to comprehensively explain the reasoning pathway to the correct answer. The lowest QCR score is given to questions with a reasoning pathway requiring only declarative knowledge whereas the highest QCR score is given to questions that require multiple pathways of multi-step reasoning. When completed, the online question archive will provide users with the utility to 1) search for and download questions based on subject and average QCR score, 2) use the QCR to score questions, and 3) add their own questions to the archive. We will also discuss other potential applications of the QCR, such as how it informs our work in developing and testing of survey instruments by allowing us to calibrate the range of question complexity. This material is based upon work supported by the National Science Foundation under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation.

  15. "Suntelligence" Survey

    Science.gov (United States)

    ... to the American Academy of Dermatology's "Suntelligence" sun-smart survey. Please answer the following questions to measure ... be able to view a ranking of major cities suntelligence based on residents' responses to this survey. ...

  16. DESIGN AND PRACTICE ON METADATA SERVICE SYSTEM OF SURVEYING AND MAPPING RESULTS BASED ON GEONETWORK

    Directory of Open Access Journals (Sweden)

    Z. Zha

    2012-08-01

    Full Text Available Based on the analysis and research on the current geographic information sharing and metadata service,we design, develop and deploy a distributed metadata service system based on GeoNetwork covering more than 30 nodes in provincial units of China.. By identifying the advantages of GeoNetwork, we design a distributed metadata service system of national surveying and mapping results. It consists of 31 network nodes, a central node and a portal. Network nodes are the direct system metadata source, and are distributed arround the country. Each network node maintains a metadata service system, responsible for metadata uploading and management. The central node harvests metadata from network nodes using OGC CSW 2.0.2 standard interface. The portal shows all metadata in the central node, provides users with a variety of methods and interface for metadata search or querying. It also provides management capabilities on connecting the central node and the network nodes together. There are defects with GeoNetwork too. Accordingly, we made improvement and optimization on big-amount metadata uploading, synchronization and concurrent access. For metadata uploading and synchronization, by carefully analysis the database and index operation logs, we successfully avoid the performance bottlenecks. And with a batch operation and dynamic memory management solution, data throughput and system performance are significantly improved; For concurrent access, , through a request coding and results cache solution, query performance is greatly improved. To smoothly respond to huge concurrent requests, a web cluster solution is deployed. This paper also gives an experiment analysis and compares the system performance before and after improvement and optimization. Design and practical results have been applied in national metadata service system of surveying and mapping results. It proved that the improved GeoNetwork service architecture can effectively adaptive for

  17. Evaluation of Nine Consensus Indices in Delphi Foresight Research and Their Dependency on Delphi Survey Characteristics: A Simulation Study and Debate on Delphi Design and Interpretation.

    Science.gov (United States)

    Birko, Stanislav; Dove, Edward S; Özdemir, Vural

    2015-01-01

    The extent of consensus (or the lack thereof) among experts in emerging fields of innovation can serve as antecedents of scientific, societal, investor and stakeholder synergy or conflict. Naturally, how we measure consensus is of great importance to science and technology strategic foresight. The Delphi methodology is a widely used anonymous survey technique to evaluate consensus among a panel of experts. Surprisingly, there is little guidance on how indices of consensus can be influenced by parameters of the Delphi survey itself. We simulated a classic three-round Delphi survey building on the concept of clustered consensus/dissensus. We evaluated three study characteristics that are pertinent for design of Delphi foresight research: (1) the number of survey questions, (2) the sample size, and (3) the extent to which experts conform to group opinion (the Group Conformity Index) in a Delphi study. Their impacts on the following nine Delphi consensus indices were then examined in 1000 simulations: Clustered Mode, Clustered Pairwise Agreement, Conger's Kappa, De Moivre index, Extremities Version of the Clustered Pairwise Agreement, Fleiss' Kappa, Mode, the Interquartile Range and Pairwise Agreement. The dependency of a consensus index on the Delphi survey characteristics was expressed from 0.000 (no dependency) to 1.000 (full dependency). The number of questions (range: 6 to 40) in a survey did not have a notable impact whereby the dependency values remained below 0.030. The variation in sample size (range: 6 to 50) displayed the top three impacts for the Interquartile Range, the Clustered Mode and the Mode (dependency = 0.396, 0.130, 0.116, respectively). The Group Conformity Index, a construct akin to measuring stubbornness/flexibility of experts' opinions, greatly impacted all nine Delphi consensus indices (dependency = 0.200 to 0.504), except the Extremity CPWA and the Interquartile Range that were impacted only beyond the first decimal point (dependency = 0

  18. Can psychosocial and socio-demographic questions help identify sexual risk among heterosexually-active women of reproductive age? Evidence from Britain’s third National Survey of Sexual Attitudes and Lifestyles (Natsal-3

    Directory of Open Access Journals (Sweden)

    Natalie Edelman

    2017-01-01

    Full Text Available Abstract Background Contraceptive advice and supply (CAS and sexually transmitted infection (STI testing are increasingly provided in primary care. Most risk assessment tools are based on sexual risk behaviours and socio-demographics, for use online or in specialist services. Combining socio-demographic and psychosocial questions (e.g. religious belief and formative experience may generate an acceptable tool for targeting women in primary care who would benefit from intervention. We aimed to identify psychosocial and socio-demographic factors associated with reporting key sexual risk behaviours among women in the British general population. Methods We undertook complex survey analysis of data from 4911 hetero-sexually active women aged 16–44 years, who participated in Britain’s third National Survey of Sexual Attitudes and Lifestyles (Natsal-3, a national probability sample survey undertaken 2010–2012. We used multivariable regression to examine associations between the available psychosocial and socio-demographic variables in Natsal-3 and reports of three key sexual behaviours: a 2+ partners in the last year (2PP; b non-use of condoms with 2+ partners in the last year (2PPNC; c non-use of condoms at first sex with most recent sexual partner (FSNC. We adjusted for key socio-demographic factors: age, ethnicity and socio-economic status (measured by housing tenure. Results Weekly binge drinking (6+ units on one occasion, and first sex before age 16 were each positively associated with all three sexual behaviours after adjustment. Current relationship status, reporting drug use (ever, younger age and living in rented accommodation were also associated with 2+ partners and 2 + partners without condoms after adjustment. Currently being a smoker, older age and respondent ethnicity were associated with FSNC after adjustment for all other variables. Current smoking status, treatment for depression (last year, and living at home with both

  19. Frequent Questions on Recycling

    Science.gov (United States)

    This is a list of frequent questions on recycling, broken down into five categories. These are answers to common questions that EPA has received from press and web inquiries. This list is located on the Reduce, Reuse, Recycle website.

  20. Survey of extreme load design regulatory agency licensing requirements for nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, J D

    1976-04-01

    Since 1965, when extreme load requirements began to be considered explicitly in nuclear power plant design, there has been a gradual divergence in requirements imposed by national regulatory agencies. However, nuclear plant safety is an international problem because of the potential international effects of any postulated plant failure. For this reason this paper has been prepared in an attempt to highlight the differences in national criteria currently used in the extreme load design of nuclear plant facilities. No attempt has been made to evaluate the relative merit of the criteria established by the various national regulatory agencies. This paper presents the results of a recent survey made of national atomic energy regulatory agencies and major nuclear steam supply design agencies, which requested a summary of current licensing criteria associated with earthquake, extreme wind (tornado), flood, airplane crash and accident (pipe break) loads applicable within the various national jurisdictions. Also presented are a number of comparisons which are meant to illustrate the differences in national regulatory criteria.

  1. Survey of extreme load design regulatory agency licensing requirements for nuclear power plants

    International Nuclear Information System (INIS)

    Stevenson, J.D.

    1976-01-01

    Since 1965, when extreme load requirements began to be considered explicitly in nuclear power plant design, there has been a gradual divergence in requirements imposed by national regulatory agencies. However, nuclear plant safety is an international problem because of the potential international effects of any postulated plant failure. For this reason this paper has been prepared in an attempt to highlight the differences in national criteria currently used in the extreme load design of nuclear plant facilities. No attempt has been made to evaluate the relative merit of the criteria established by the various national regulatory agencies. This paper presents the results of a recent survey made of national atomic energy regulatory agencies and major nuclear steam supply design agencies, which requested a summary of current licensing criteria associated with earthquake, extreme wind (tornado), flood, airplane crash and accident (pipe break) loads applicable within the various national jurisdictions. Also presented are a number of comparisons which are meant to illustrate the differences in national regulatory criteria. (Auth.)

  2. Asking Questions in Academia

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    2014-01-01

    Motivation for the activity In academia the most important skill is to ask academically relevant and sound questions. This is not easy and students need to practice asking questions orally and in writing before they write research papers.......Motivation for the activity In academia the most important skill is to ask academically relevant and sound questions. This is not easy and students need to practice asking questions orally and in writing before they write research papers....

  3. The Unique Optical Design of the CTI-II Survey Telescope

    Science.gov (United States)

    Ackermann, Mark R.; McGraw, J. T.; MacFarlane, M.

    2006-12-01

    The CCD/Transit Instrument with Innovative Instrumentation (CTI-II) is being developed for precision ground-based astrometric and photometric astronomical observations. The 1.8m telescope will be stationary, near-zenith pointing and will feature a CCD-mosaic array operated in time-delay and integrate (TDI) mode to image a continuous strip of the sky in five bands. The heart of the telescope is a Nasmyth-like bent-Cassegrain optical system optimized to produce near diffraction-limited images with near zero distortion over a circular1.42 deg field. The optical design includes an f/2.2 parabolic ULE primary with no central hole salvaged from the original CTI telescope and adds the requisite hyperbolic secondary, a folding flat and a highly innovative all-spherical, five lens corrector which includes three plano surfaces. The reflective and refractive portions of the design have been optimized as individual but interdependent systems so that the same reflective system can be used with slightly different refractive correctors. At present, two nearly identical corrector designs are being evaluated, one fabricated from BK-7 glass and the other of fused silica. The five lens corrector consists of an air-spaced triplet separated from follow-on air-spaced doublet. Either design produces 0.25 arcsecond images at 83% encircled energy with a maximum of 0.0005% distortion. The innovative five lens corrector design has been applied to other current and planned Cassegrain, RC and super RC optical systems requiring correctors. The basic five lens approach always results in improved performance compared to the original designs. In some cases, the improvement in image quality is small but includes substantial reductions in distortion. In other cases, the improvement in image quality is substantial. Because the CTI-II corrector is designed for a parabolic primary, it might be especially useful for liquid mirror telescopes. We describe and discuss the CTI-II optical design with respect

  4. Changes in depth occupied by Great Lakes lake whitefish populations and the influence of survey design

    Science.gov (United States)

    Rennie, Michael D.; Weidel, Brian C.; Claramunt, Randall M.; Dunlob, Erin S.

    2015-01-01

    Understanding fish habitat use is important in determining conditions that ultimately affect fish energetics, growth and reproduction. Great Lakes lake whitefish (Coregonus clupeaformis) have demonstrated dramatic changes in growth and life history traits since the appearance of dreissenid mussels in the Great Lakes, but the role of habitat occupancy in driving these changes is poorly understood. To better understand temporal changes in lake whitefish depth of capture (Dw), we compiled a database of fishery-independent surveys representing multiple populations across all five Laurentian Great Lakes. By demonstrating the importance of survey design in estimating Dw, we describe a novel method for detecting survey-based bias in Dw and removing potentially biased data. Using unbiased Dw estimates, we show clear differences in the pattern and timing of changes in lake whitefish Dw between our reference sites (Lake Superior) and those that have experienced significant benthic food web changes (lakes Michigan, Huron, Erie and Ontario). Lake whitefish Dw in Lake Superior tended to gradually shift to shallower waters, but changed rapidly in other locations coincident with dreissenid establishment and declines in Diporeia densities. Almost all lake whitefish populations that were exposed to dreissenids demonstrated deeper Dw following benthic food web change, though a subset of these populations subsequently shifted to more shallow depths. In some cases in lakes Huron and Ontario, shifts towards more shallow Dw are occurring well after documented Diporeia collapse, suggesting the role of other drivers such as habitat availability or reliance on alternative prey sources.

  5. Pilates program design and health benefits for pregnant women: A practitioners' survey.

    Science.gov (United States)

    Mazzarino, Melissa; Kerr, Debra; Morris, Meg E

    2018-04-01

    Little is known about recommendations for safe and appropriate instruction of Pilates exercises to women during pregnancy. The aim of this study was to examine Pilates practitioners' perspectives regarding Pilates program design for pregnant women. We also sought to elucidate their views on the potential benefits, restrictions and contraindications on Pilates in pregnancy. A cross-sectional survey was performed. Pilates practitioners were invited to participate via email. Participants were surveyed about their experience and views on: screening processes in alignment with The American College of Obstetricians and Gynecologists (ACOG) (2002) guidelines; (ii) optimal exercise program features and (iii) physical and mental health benefits of Pilates for pregnant women. The survey was completed by 192 Pilates practitioners from a range of settings. Practitioners reported conducting formal screening (84%) for safety in pregnant women prior to commencing Pilates classes. Most did not routinely seek medical approval from the woman's general practitioner. Divergent views emerged regarding the safety and benefits of Pilates exercises in the supine position. Mixed opinions were also generated regarding the effects of spinal flexion exercises, single-leg stance exercises and breathing manoeuvres. There was little agreement on the optimal frequency or dosage of exercises. Views regarding absolute contraindications to exercise differed from The American College of Obstetricians and Gynecologists (ACOG) (2002) guidelines which cautioned about the dangers of persistent bleeding, premature labour, pre-eclampsia, placental praevia and incompetent cervix. The most frequent reported physical and psychological benefit of Pilates was improving pelvic floor strength (12%) and improved social wellbeing (23%). The study highlighted wide variations in practice for Pilates exercises with pregnant woman as well as low adherence to clinical practice guidelines. Further evidence is required to

  6. Improving Student Question Classification

    Science.gov (United States)

    Heiner, Cecily; Zachary, Joseph L.

    2009-01-01

    Students in introductory programming classes often articulate their questions and information needs incompletely. Consequently, the automatic classification of student questions to provide automated tutorial responses is a challenging problem. This paper analyzes 411 questions from an introductory Java programming course by reducing the natural…

  7. A survey of pulse shape options for a revised plastic ablator ignition design

    Energy Technology Data Exchange (ETDEWEB)

    Clark, D. S.; Milovich, J. L.; Hinkel, D. E.; Salmonson, J. D.; Peterson, J. L.; Berzak Hopkins, L. F.; Eder, D. C.; Haan, S. W.; Jones, O. S.; Marinak, M. M.; Robey, H. F.; Smalyuk, V. A.; Weber, C. R. [Lawrence Livermore National Laboratory Livermore, California 94550 (United States)

    2014-11-15

    Recent experimental results using the “high foot” pulse shape for inertial confinement fusion ignition experiments on the National Ignition Facility (NIF) [Moses et al., Phys. Plasmas 16, 041006 (2009)] have shown encouraging progress compared to earlier “low foot” experiments. These results strongly suggest that controlling ablation front instability growth can significantly improve implosion performance even in the presence of persistent, large, low-mode distortions. Simultaneously, hydrodynamic growth radiography experiments have confirmed that ablation front instability growth is being modeled fairly well in NIF experiments. It is timely then to combine these two results and ask how current ignition pulse shapes could be modified to improve one-dimensional implosion performance while maintaining the stability properties demonstrated with the high foot. This paper presents such a survey of pulse shapes intermediate between the low and high foot extremes in search of an intermediate foot optimum. Of the design space surveyed, it is found that a higher picket version of the low foot pulse shape shows the most promise for improved compression without loss of stability.

  8. SURVEY DESIGN FOR SPECTRAL ENERGY DISTRIBUTION FITTING: A FISHER MATRIX APPROACH

    International Nuclear Information System (INIS)

    Acquaviva, Viviana; Gawiser, Eric; Bickerton, Steven J.; Grogin, Norman A.; Guo Yicheng; Lee, Seong-Kook

    2012-01-01

    The spectral energy distribution (SED) of a galaxy contains information on the galaxy's physical properties, and multi-wavelength observations are needed in order to measure these properties via SED fitting. In planning these surveys, optimization of the resources is essential. The Fisher Matrix (FM) formalism can be used to quickly determine the best possible experimental setup to achieve the desired constraints on the SED-fitting parameters. However, because it relies on the assumption of a Gaussian likelihood function, it is in general less accurate than other slower techniques that reconstruct the probability distribution function (PDF) from the direct comparison between models and data. We compare the uncertainties on SED-fitting parameters predicted by the FM to the ones obtained using the more thorough PDF-fitting techniques. We use both simulated spectra and real data, and consider a large variety of target galaxies differing in redshift, mass, age, star formation history, dust content, and wavelength coverage. We find that the uncertainties reported by the two methods agree within a factor of two in the vast majority (∼90%) of cases. If the age determination is uncertain, the top-hat prior in age used in PDF fitting to prevent each galaxy from being older than the universe needs to be incorporated in the FM, at least approximately, before the two methods can be properly compared. We conclude that the FM is a useful tool for astronomical survey design.

  9. Hot rocket plume experiment - Survey and conceptual design. [of rhenium-iridium bipropellants

    Science.gov (United States)

    Millard, Jerry M.; Luan, Taylor W.; Dowdy, Mack W.

    1992-01-01

    Attention is given to a space-borne engine plume experiment study to fly an experiment which will both verify and quantify the reduced contamination from advanced rhenium-iridium earth-storable bipropellant rockets (hot rockets) and provide a correlation between high-fidelity, in-space measurements and theoretical plume and surface contamination models. The experiment conceptual design is based on survey results from plume and contamination technologists throughout the U.S. With respect to shuttle use, cursory investigations validate Hitchhiker availability and adaptability, adequate remote manipulator system (RMS) articulation and dynamic capability, acceptable RMS attachment capability, adequate power and telemetry capability, and adequate flight altitude and attitude/orbital capability.

  10. Subsurface Characterization using Geophysical Seismic Refraction Survey for Slope Stabilization Design with Soil Nailing

    Science.gov (United States)

    Ashraf Mohamad Ismail, Mohd; Ng, Soon Min; Hazreek Zainal Abidin, Mohd; Madun, Aziman

    2018-04-01

    The application of geophysical seismic refraction for slope stabilization design using soil nailing method was demonstrated in this study. The potential weak layer of the study area is first identify prior to determining the appropriate length and location of the soil nail. A total of 7 seismic refraction survey lines were conducted at the study area with standard procedures. The refraction data were then analyzed by using the Pickwin and Plotrefa computer software package to obtain the seismic velocity profiles distribution. These results were correlated with the complementary borehole data to interpret the subsurface profile of the study area. It has been identified that layer 1 to 3 is the potential weak zone susceptible to slope failure. Hence, soil nails should be installed to transfer the tensile load from the less stable layer 3 to the more stable layer 4. The soil-nail interaction will provide a reinforcing action to the soil mass thereby increasing the stability of the slope.

  11. Designing HIGH-COST medicine: hospital surveys, health planning, and the paradox of progressive reform.

    Science.gov (United States)

    Perkins, Barbara Bridgman

    2010-02-01

    Inspired by social medicine, some progressive US health reforms have paradoxically reinforced a business model of high-cost medical delivery that does not match social needs. In analyzing the financial status of their areas' hospitals, for example, city-wide hospital surveys of the 1910s through 1930s sought to direct capital investments and, in so doing, control competition and markets. The 2 national health planning programs that ran from the mid-1960s to the mid-1980s continued similar strategies of economic organization and management, as did the so-called market reforms that followed. Consequently, these reforms promoted large, extremely specialized, capital-intensive institutions and systems at the expense of less complex (and less costly) primary and chronic care. The current capital crisis may expose the lack of sustainability of such a model and open up new ideas and new ways to build health care designed to meet people's health needs.

  12. Monte Carlo Analysis as a Trajectory Design Driver for the Transiting Exoplanet Survey Satellite (TESS) Mission

    Science.gov (United States)

    Nickel, Craig; Parker, Joel; Dichmann, Don; Lebois, Ryan; Lutz, Stephen

    2016-01-01

    The Transiting Exoplanet Survey Satellite (TESS) will be injected into a highly eccentric Earth orbit and fly 3.5 phasing loops followed by a lunar flyby to enter a mission orbit with lunar 2:1 resonance. Through the phasing loops and mission orbit, the trajectory is significantly affected by lunar and solar gravity. We have developed a trajectory design to achieve the mission orbit and meet mission constraints, including eclipse avoidance and a 30-year geostationary orbit avoidance requirement. A parallelized Monte Carlo simulation was performed to validate the trajectory after injecting common perturbations, including launch dispersions, orbit determination errors, and maneuver execution errors. The Monte Carlo analysis helped identify mission risks and is used in the trajectory selection process.

  13. Three-dimensional seismic survey planning based on the newest data acquisition design technique; Saishin no data shutoku design ni motozuku sanjigen jishin tansa keikaku

    Energy Technology Data Exchange (ETDEWEB)

    Minehara, M; Nakagami, K; Tanaka, H [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1996-10-01

    Theory of parameter setting for data acquisition is arranged, mainly as to the seismic generating and receiving geometry. This paper also introduces an example of survey planning for three-dimensional land seismic exploration in progress. For the design of data acquisition, fundamental parameters are firstly determined on the basis of the characteristics of reflection records at a given district, and then, the layout of survey is determined. In this study, information through modeling based on the existing interpretation of geologic structures is also utilized, to reflect them for survey specifications. Land three-dimensional seismic survey was designed. Ground surface of the surveyed area consists of rice fields and hilly regions. The target was a nose-shaped structure in the depth about 2,500 m underground. A survey area of 4km{times}5km was set. Records in the shallow layers could not obtained when near offset was not ensured. Quality control of this distribution was important for grasping the shallow structure required. In this survey, the seismic generating point could be ensured more certainly than initially expected, which resulted in the sufficient security of near offset. 2 refs., 2 figs.

  14. Shortcomings of the written survey questionnaire for discovering ...

    African Journals Online (AJOL)

    The problems can be categorised as follows: poor survey design; not doing enough with the responses; questions which only scratch the surface; and, respondents not knowing how to answer questions appropriately. Example questions from the questionnaire are given to illustrate these shortcomings. Recommendations ...

  15. LH2 Target Design & Position Survey Techniques for the MUSE experiment for Precise Proton Radius Measurement

    Science.gov (United States)

    Le Pottier, Luc; Roy, Pryiashee; Lorenzon, Wolfgang; Raymond, Richard; Steinberg, Noah; Rossi de La Fuente, Erick; MUSE (MUon proton Scattering Experiment) Collaboration

    2017-09-01

    The proton radius puzzle is a currently unresolved problem which has intrigued the scientific community, dealing with a 7 σ discrepancy between the proton radii determined from muonic hydrogen spectroscopy and electron scattering measurements. The MUon Scattering Experiment (MUSE) aims to resolve this puzzle by performing the first simultaneous elastic scattering measurements of both electrons and muons on the proton, which will allow the comparison of the radii from the two interactions with reduced systematic uncertainties. The data from this experiment is expected to provide the best test of lepton universality to date. The experiment will take place at the Paul Scherrer Institute in Switzerland in 2018. An essential component of the experiment is a liquid hydrogen (LH2) cryotarget system. Our group at the University of Michigan is responsible for the design, fabrication and installation of this system. Here we present our LH2 target cell design and fabrication techniques for successful operation at 20 K and 1 atm, and our computer vision-based target position survey system which will determine the position of the target, installed inside a vacuum chamber, with 0.01 mm or better precision at the height of the liquid hydrogen target and along the beam direction during the experiment.

  16. A Polar Rover for Large-Scale Scientific Surveys: Design, Implementation and Field Test Results

    Directory of Open Access Journals (Sweden)

    Yuqing He

    2015-10-01

    Full Text Available Exploration of polar regions is of great importance to scientific research. Unfortunately, due to the harsh environment, most of the regions on the Antarctic continent are still unreachable for humankind. Therefore, in 2011, the Chinese National Antarctic Research Expedition (CHINARE launched a project to design a rover to conduct large-scale scientific surveys on the Antarctic. The main challenges for the rover are twofold: one is the mobility, i.e., how to make a rover that could survive the harsh environment and safely move on the uneven, icy and snowy terrain; the other is the autonomy, in that the robot should be able to move at a relatively high speed with little or no human intervention so that it can explore a large region in a limit time interval under the communication constraints. In this paper, the corresponding techniques, especially the polar rover's design and autonomous navigation algorithms, are introduced in detail. Subsequently, an experimental report of the fields tests on the Antarctic is given to show some preliminary evaluation of the rover. Finally, experiences and existing challenging problems are summarized.

  17. Mechanical Design of NESSI: New Mexico Tech Extrasolar Spectroscopic Survey Instrument

    Science.gov (United States)

    Santoro, Fernando G.; Olivares, Andres M.; Salcido, Christopher D.; Jimenez, Stephen R.; Jurgenson, Colby A.; Hrynevych, Michael A.; Creech-Eakman, Michelle J.; Boston, Penny J.; Schmidt, Luke M.; Bloemhard, Heather; hide

    2011-01-01

    NESSI: the New Mexico Tech Extrasolar Spectroscopic Survey Instrument is a ground-based multi-object spectrograph that operates in the near-infrared. It will be installed on one of the Nasmyth ports of the Magdalena Ridge Observatory (MRO) 2.4-meter Telescope sited in the Magdalena Mountains, about 48 km west of Socorro-NM. NESSI operates stationary to the telescope fork so as not to produce differential flexure between internal opto-mechanical components during or between observations. An appropriate mechanical design allows the instrument alignment to be highly repeatable and stable for both short and long observation timescales, within a wide-range of temperature variation. NESSI is optically composed of a field lens, a field de-rotator, re-imaging optics, an auto-guider and a Dewar spectrograph that operates at LN2 temperature. In this paper we report on NESSI's detailed mechanical and opto-mechanical design, and the planning for mechanical construction, assembly, integration and verification.

  18. Questions and Answers About Nuclear Power Plants.

    Science.gov (United States)

    Environmental Protection Agency, Washington, DC.

    This pamphlet is designed to answer many of the questions that have arisen about nuclear power plants and the environment. It is organized into a question and answer format, with the questions taken from those most often asked by the public. Topics include regulation of nuclear power sources, potential dangers to people's health, whether nuclear…

  19. Asking the Right Questions

    DEFF Research Database (Denmark)

    Richter, Line

    Based on fieldwork in Mali this paper discusses the role of anthropology (and the anthropologist) in a large public health research project on children's health. In the uncertainty and disquiet that comes with the battle to combat and avoid diseases in a setting where poverty and abysmal diseases......, is the ability to move beyond even the best hidden assumptions and question our own questions, thereby enabling us to ask the right questions....

  20. Live your questions now

    OpenAIRE

    Brownrigg, Jenny

    2016-01-01

    'Live Your Questions Now' is a case study for Cubitt Education's publication 'Aging in Public: creative practice in ageing and the public realm from across the UK', edited by Daniel Baker and published by Cubitt Gallery, Studios and Education, London in 2016. The publication was linked to Cubitt's programme 'Public Wisdom' (2011-2015). My case study is about 'Live your questions now', a group exhibition I curated in 2011 for Mackintosh Museum, The Glasgow School of Art. 'Live your questions n...

  1. Radiation survey of first Hi-Art II Tomotherapy vault design in India

    International Nuclear Information System (INIS)

    Kinhikar, Rajesh A.; Jamema, S.V.; Pai, Rajeshree; Sharma, P.K. Dash; Deshpande, Deepak D.

    2009-01-01

    A vault as per government-regulation compliance with adequate shielding needs was designed and constructed for Hi-Art II Tomotherapy machine being the first in India. Radiation measurements around this Tomotherapy treatment vault were carried out to check the shielding adequacy of the source housing and the vault. It was mandatory to get this un-conventional machine 'Type Approved' by Atomic Energy Regulatory Board (AERB) in India. The aim of this paper was to report on the radiation levels measured during the radiation survey carried out for this machine. The radiation levels in and around the vault were measured for stationary as well as rotational treatment procedures with the largest open field size (5 cm x 40 cm) at the isocenter with and without scattering medium. The survey was performed at three locations near each wall surrounding the vault as well. The leakage radiation from the source housing was measured both in the patient plane outside the treatment field and one meter distance from the source outside the patient plane. The radiation levels both for stationary as well as rotational procedures were within 1 mR/h. No significance difference was observed in the radiation levels measured for rotational procedures with and without scattering medium. The leakage radiation in the patient plane was found to be 0.04% (Tolerance 0.2%), while the head leakage was 0.007% (Tolerance 0.5%) of the dose rate at the isocenter. The treatment delivery with Tomotherapy does play safe radiation levels around the installation layout and also passes the leakage criteria as well.

  2. Is the Lack of Specific Lesbian, Gay, Bisexual, Transgender and Queer/Questioning (LGBTQ) Health Care Education in Medical School a Cause for Concern? Evidence From a Survey of Knowledge and Practice Among UK Medical Students.

    Science.gov (United States)

    Parameshwaran, Vishnu; Cockbain, Beatrice C; Hillyard, Miriam; Price, Jonathan R

    2017-01-01

    Lesbian, gay, bisexual, transgender and queer/questioning (LGBTQ) people frequently report negative health care encounters. Medical professionals may inadequately manage LGBTQ persons' health if they have not received training in this area. An anonymous survey measuring efficacy in health situations among LGBTQ persons was answered by 166 medical students across all years of a UK university. Results show that 84.9% of participants reported a lack of LGBTQ health care education, with deficits in confidence clarifying unfamiliar sexual and gender terms, deciding the ward in which to nurse transgender patients, finding support resources, and discussing domestic abuse with LGBTQ patients. Most participants reported that they would not clarify gender pronouns or ask about gender or sexual identity in mental health or reproductive health settings. Participants reported infrequently observing doctors making similar inquiries. Participants held positive attitudes toward LGBTQ patients, with attitude scores positively correlating with LGBTQ terminology knowledge scores (r s  = 0.5052, p LGBTQ patients.

  3. AHTD cracking protocol application with automated distress survey for design and management.

    Science.gov (United States)

    2011-03-09

    Manual surveys of pavement cracking have problems associated with variability, repeatability, processing : speed, and cost. If conducted in the field, safety and related liability of manual survey present challenges : to highway agencies. Therefore a...

  4. Optimal design of a lagrangian observing system for hydrodynamic surveys in coastal areas

    Science.gov (United States)

    Cucco, Andrea; Quattrocchi, Giovanni; Antognarelli, Fabio; Satta, Andrea; Maicu, Francesco; Ferrarin, Christian; Umgiesser, Georg

    2014-05-01

    The optimization of ocean observing systems is a pressing need for scientific research. In particular, the improvement of ocean short-term observing networks is achievable by reducing the cost-benefit ratio of the field campaigns and by increasing the quality of measurements. Numerical modeling is a powerful tool for determining the appropriateness of a specific observing system and for optimizing the sampling design. This is particularly true when observations are carried out in coastal areas and lagoons where, the use satellites is prohibitive due to the water shallowness. For such areas, numerical models are the most efficient tool both to provide a preliminary assess of the local physical environment and to make short -term predictions above its change. In this context, a test case experiment was carried out within an enclosed shallow water areas, the Cabras Lagoon (Sardinia, Italy). The aim of the experiment was to explore the optimal design for a field survey based on the use of coastal lagrangian buoys. A three-dimensional hydrodynamic model based on the finite element method (SHYFEM3D, Umgiesser et al., 2004) was implemented to simulate the lagoon water circulation. The model domain extent to the whole Cabras lagoon and to the whole Oristano Gulf, including the surrounding coastal area. Lateral open boundary conditions were provided by the operational ocean model system WMED and only wind forcing, provided by SKIRON atmospheric model (Kallos et al., 1997), was considered as surface boundary conditions. The model was applied to provide a number of ad hoc scenarios and to explore the efficiency of the short-term hydrodynamic survey. A first field campaign was carried out to investigate the lagrangian circulation inside the lagoon under the main wind forcing condition (Mistral wind from North-West). The trajectories followed by the lagrangian buoys and the estimated lagrangian velocities were used to calibrate the model parameters and to validate the

  5. Mode Equivalence of Health Indicators Between Data Collection Modes and Mixed-Mode Survey Designs in Population-Based Health Interview Surveys for Children and Adolescents: Methodological Study

    Science.gov (United States)

    Hoffmann, Robert; Houben, Robin; Krause, Laura; Kamtsiuris, Panagiotis; Gößwald, Antje

    2018-01-01

    Background The implementation of an Internet option in an existing public health interview survey using a mixed-mode design is attractive because of lower costs and faster data availability. Additionally, mixed-mode surveys can increase response rates and improve sample composition. However, mixed-mode designs can increase the risk of measurement error (mode effects). Objective This study aimed to determine whether the prevalence rates or mean values of self- and parent-reported health indicators for children and adolescents aged 0-17 years differ between self-administered paper-based questionnaires (SAQ-paper) and self-administered Web-based questionnaires (SAQ-Web), as well as between a single-mode control group and different mixed-mode groups. Methods Data were collected for a methodological pilot of the third wave of the "German Health Interview and Examination Survey for Children and Adolescents". Questionnaires were completed by parents or adolescents. A population-based sample of 11,140 children and adolescents aged 0-17 years was randomly allocated to 4 survey designs—a single-mode control group with paper-and-pencil questionnaires only (n=970 parents, n=343 adolescents)—and 3 mixed-mode designs, all of which offered Web-based questionnaire options. In the concurrent mixed-mode design, both questionnaires were offered at the same time (n=946 parents, n=290 adolescents); in the sequential mixed-mode design, the SAQ-Web was sent first, followed by the paper questionnaire along with a reminder (n=854 parents, n=269 adolescents); and in the preselect mixed-mode design, both options were offered and the respondents were asked to request the desired type of questionnaire (n=698 parents, n=292 adolescents). In total, 3468 questionnaires of parents of children aged 0-17 years (SAQ-Web: n=708; SAQ-paper: n=2760) and 1194 questionnaires of adolescents aged 11-17 years (SAQ-Web: n=299; SAQ-paper: n=895) were analyzed. Sociodemographic characteristics and a broad

  6. Utility FGD Survey, January--December 1989. Volume 2, Design performance data for operating FGD systems, Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. [IT Corp., Cincinnati, OH (United States)

    1992-03-01

    The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

  7. A single-question screen for rapid eye movement sleep behavior disorder

    DEFF Research Database (Denmark)

    Postuma, Ronald B; Arnulf, Isabelle; Hogl, Birgit

    2012-01-01

    Idiopathic rapid eye movement (REM) sleep behavior disorder (RBD) is a parasomnia that is an important risk factor for Parkinson's disease (PD) and Lewy body dementia. Its prevalence is unknown. One barrier to determining prevalence is that current screening tools are too long for large......-scale epidemiologic surveys. Therefore, we designed the REM Sleep Behavior Disorder Single-Question Screen (RBD1Q), a screening question for dream enactment with a simple yes/no response....

  8. The use of operator surveys by the CEGB to evaluate nuclear control room design and initiatives in the design of alarm systems and control room operating procedures

    International Nuclear Information System (INIS)

    Jackson, A.R.G.

    1988-01-01

    This paper reports on the use of operator surveys and trip report analysis methods which the Central Electricity Generating Board has developed to assess the extent and adequacy of operator support systems currently installed on its four twin-reactor, first generation Advanced Gas Cooled Reactor nuclear power plants. The survey consisted of a programme of structured interviews with control room engineers. The scope of the questions addressed; working environment, communications, man-machine interface, procedural information, and the diagnostic and predictive support system. The analysis of trip reports was targetted at identifying aspects of the performance of the operator support systems which might have been contributory to the cause of reactor trip. The results of this work are being used to assist in determining guidelines for the development of operator support systems, computerised controls and the structure of station operating procedures

  9. A two-phase sampling design for increasing detections of rare species in occupancy surveys

    Science.gov (United States)

    Pacifici, Krishna; Dorazio, Robert M.; Dorazio, Michael J.

    2012-01-01

    1. Occupancy estimation is a commonly used tool in ecological studies owing to the ease at which data can be collected and the large spatial extent that can be covered. One major obstacle to using an occupancy-based approach is the complications associated with designing and implementing an efficient survey. These logistical challenges become magnified when working with rare species when effort can be wasted in areas with none or very few individuals. 2. Here, we develop a two-phase sampling approach that mitigates these problems by using a design that places more effort in areas with higher predicted probability of occurrence. We compare our new sampling design to traditional single-season occupancy estimation under a range of conditions and population characteristics. We develop an intuitive measure of predictive error to compare the two approaches and use simulations to assess the relative accuracy of each approach. 3. Our two-phase approach exhibited lower predictive error rates compared to the traditional single-season approach in highly spatially correlated environments. The difference was greatest when detection probability was high (0·75) regardless of the habitat or sample size. When the true occupancy rate was below 0·4 (0·05-0·4), we found that allocating 25% of the sample to the first phase resulted in the lowest error rates. 4. In the majority of scenarios, the two-phase approach showed lower error rates compared to the traditional single-season approach suggesting our new approach is fairly robust to a broad range of conditions and design factors and merits use under a wide variety of settings. 5. Synthesis and applications. Conservation and management of rare species are a challenging task facing natural resource managers. It is critical for studies involving rare species to efficiently allocate effort and resources as they are usually of a finite nature. We believe our approach provides a framework for optimal allocation of effort while

  10. Legal Philosophy - Five Questions

    DEFF Research Database (Denmark)

    This collection gathers together a host of the most eminent contemporary legal philosophers, who writes about their take on legal philosophy, its fundamental questions and potential.......This collection gathers together a host of the most eminent contemporary legal philosophers, who writes about their take on legal philosophy, its fundamental questions and potential....

  11. Epistemology: 5 Questions

    DEFF Research Database (Denmark)

    Epistemology: 5 Questions is a collection of short interviews based on 5 questions presented to some of the most influential and prominent scholars in epistemology. We hear their views on epistemology with particular emphasis on the intersection between mainstream and formal approaches to the field...

  12. [Design and implementation of information management system for Chinese materia medica resources survey].

    Science.gov (United States)

    Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Jing, Zhi-Xian; Wang, Ling; Zhao, Yu-Ping; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    By means of the established Information Management System for Chinese materia medica resources survey, the national, provincial and county level organization, personnel and the implementation of the program of Chinese materia medica resources survey, and the survey team of medicinal plant investigation, photos, Chinese herbal medicine market survey, the traditional Chinese materia medica resources knowledge survey, germplasm resources investigation and the data collation and summary specimen have been realised. Throughout the whole working process of the fourth national Chinese materia medica resources survey, it is ensured that all data were no missing, no repeat, and well stored and managed. The Information Management System can improve the standardization degree of Chinese materia medica resources survey, and maintain the continuity. Copyright© by the Chinese Pharmaceutical Association.

  13. A Survey of Utopia—Creating Filmic Travelogues in Architectural Design Studio Education †

    Directory of Open Access Journals (Sweden)

    Johannes Müntinga

    2018-02-01

    Full Text Available This paper investigates the potential of the creation of filmic travelogues in architectural design studio education. It looks at student works from a studio conducted at RWTH Aachen University in the summer term of 2017 and explores how the works construct meaning from and reflect on architectural reference in an active creative process. The assignment of the studio was to create a travelogue of a 4-day excursion to Belgium and the South of England in the form of a short film. Inspired by Patrick Keiller’s film Robinson in Space, the students were invited to explore the Situationist techniques of Drifting and Psychogeography, and to use them in their visual storytelling. The studio´s title A Survey of Utopia makes reference to the architectural and urbanistic projects that were visited: visionary residential projects from the 1960s to 1980s, built by well-known architects of this period, such as Lucien Kroll, Walter Segal and Leon Krier. The term utopia hints at the projects shared interest in radical change and bold new architectural approaches, even though each pursues its own distinct kind of utopia.

  14. Evaluating the Needs of Patients Living With Solid Tumor Cancer: A Survey Design.

    Science.gov (United States)

    Schmidt, April L; Lorenz, Rebecca A; Buchanan, Paula M; McLaughlin, Laura

    2018-03-01

    To describe the unmet needs of adult patients living with solid tumor cancer. Survey design. Adult patients living with solid tumor cancer from two outpatient clinics were mailed the Sheffield Profile for Assessment and Referral to Care, a holistic screening questionnaire for assessing palliative care needs, and a demographics questionnaire. One hundred fifteen patients returned the instruments, corresponding to a 62% response rate. There were no significant differences by cancer type (breast, non-breast) or gender. However, Caucasians reported significantly more psychological issues, such as anxiety, than non-Caucasians ([ n = 101 (87.8%)] and [ n = 14 (12.2%)], respectively, p = .032). Older patients reported more concerns about loss of independence/activity ( p = .012) compared with younger age groups. Patients living with Stage III/IV cancer reported more distressed about independence/activity ( p = .034), family/social issues ( p = .007), and treatment side effects ( p = .027) than patients living with Stage I/II cancer. Patients living with solid tumor cancer have a myriad of unmet needs regardless of age, gender, cancer type, or cancer stage. There appears to be important differences by cancer stage. The Sheffield Profile for Assessment and Referral to Care questionnaire provides a holistic approach for nurses to identify unmet needs and concerns. Future research should explore the preferred methods of receiving support and information.

  15. Water data to answer urgent water policy questions: Monitoring design, available data, and filling data gaps for determining whether shale gas development activities contaminate surface water or groundwater in the Susquehanna River Basin

    Science.gov (United States)

    Betanzo, Elin A.; Hagen, Erik R.; Wilson, John T.; Reckhow, Kenneth H.; Hayes, Laura; Argue, Denise M.; Cangelosi, Allegra A.

    2016-01-01

    Throughout its history, the United States has made major investments in assessing natural resources, such as soils, timber, oil and gas, and water. These investments allow policy makers, the private sector and the American public to make informed decisions about cultivating, harvesting or conserving these resources to maximize their value for public welfare, environmental conservation and the economy. As policy issues evolve, new priorities and challenges arise for natural resource assessment, and new approaches to monitoring are needed. For example, new technologies for oil and gas development or alternative energy sources may present new risks for water resources both above and below ground. There is a need to evaluate whether today’s water monitoring programs are generating the information needed to answer questions surrounding these new policy priorities. The Northeast-Midwest Institute (NEMWI), in cooperation with the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program, initiated this project to explore the types and amounts of water data needed to address water-quality related policy questions of critical concern to today’s policy makers and whether those data are currently available. The collaborating entities identified two urgent water policy questions and conducted case studies in the Northeast-Midwest region to determine the water data needed, water data available, and the best ways to fill the data gaps relative to those questions. This report details the output from one case study and focuses on the Susquehanna River Basin, a data-rich area expected to be a best-case scenario in terms of water data availability.

  16. Water data to answer urgent water policy questions: Monitoring design, available data and filling data gaps for determining the effectiveness of agricultural management practices for reducing tributary nutrient loads to Lake Erie

    Science.gov (United States)

    Bentanzo, Elin A.; Choquette, Anne F.; Reckhow, Kenneth H.; Hayes, Laura; Hagan, Erik R; Argue, Denise M.; Cangelosi, A.A.

    2015-01-01

    Throughout its history, the United States has made major investments in assessing natural resources, such as soils, timber, oil and gas, and water. These investments allow policy makers, the private sector and the American public to make informed decisions about cultivating, harvesting or conserving these resources to maximize their value for public welfare, environmental conservation and the economy. As policy issues evolve, new priorities and challenges arise for natural resource assessment, and new approaches to monitoring are needed. For example, informed conservation and use of the nation’s finite fresh water resources in the context of increasingly intensive land development is a priority for today’s policy decisionmakers. There is a need to evaluate whether today’s water monitoring programs are generating the information needed to answer questions surrounding these new policy priorities. The Northeast-Midwest Institute (NEMWI), in cooperation with the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program, initiated this project to explore the types and amounts of water data needed to address water-quality related policy questions of critical concern to today’s policy makers. The collaborating entities identified two urgent water policy questions and conducted case studies in the Northeast-Midwest region to determine the water data needed, water data available, and the best ways to fill the data gaps relative to those questions. This report details the output from one case study and focuses on the Lake Erie drainage basin, a data-rich area expected to be a best-case scenario in terms of water data availability.

  17. Mode Equivalence of Health Indicators Between Data Collection Modes and Mixed-Mode Survey Designs in Population-Based Health Interview Surveys for Children and Adolescents: Methodological Study.

    Science.gov (United States)

    Mauz, Elvira; Hoffmann, Robert; Houben, Robin; Krause, Laura; Kamtsiuris, Panagiotis; Gößwald, Antje

    2018-03-05

    The implementation of an Internet option in an existing public health interview survey using a mixed-mode design is attractive because of lower costs and faster data availability. Additionally, mixed-mode surveys can increase response rates and improve sample composition. However, mixed-mode designs can increase the risk of measurement error (mode effects). This study aimed to determine whether the prevalence rates or mean values of self- and parent-reported health indicators for children and adolescents aged 0-17 years differ between self-administered paper-based questionnaires (SAQ-paper) and self-administered Web-based questionnaires (SAQ-Web), as well as between a single-mode control group and different mixed-mode groups. Data were collected for a methodological pilot of the third wave of the "German Health Interview and Examination Survey for Children and Adolescents". Questionnaires were completed by parents or adolescents. A population-based sample of 11,140 children and adolescents aged 0-17 years was randomly allocated to 4 survey designs-a single-mode control group with paper-and-pencil questionnaires only (n=970 parents, n=343 adolescents)-and 3 mixed-mode designs, all of which offered Web-based questionnaire options. In the concurrent mixed-mode design, both questionnaires were offered at the same time (n=946 parents, n=290 adolescents); in the sequential mixed-mode design, the SAQ-Web was sent first, followed by the paper questionnaire along with a reminder (n=854 parents, n=269 adolescents); and in the preselect mixed-mode design, both options were offered and the respondents were asked to request the desired type of questionnaire (n=698 parents, n=292 adolescents). In total, 3468 questionnaires of parents of children aged 0-17 years (SAQ-Web: n=708; SAQ-paper: n=2760) and 1194 questionnaires of adolescents aged 11-17 years (SAQ-Web: n=299; SAQ-paper: n=895) were analyzed. Sociodemographic characteristics and a broad range of health indicators for

  18. The use of advanced web-based survey design in Delphi research.

    Science.gov (United States)

    Helms, Christopher; Gardner, Anne; McInnes, Elizabeth

    2017-12-01

    A discussion of the application of metadata, paradata and embedded data in web-based survey research, using two completed Delphi surveys as examples. Metadata, paradata and embedded data use in web-based Delphi surveys has not been described in the literature. The rapid evolution and widespread use of online survey methods imply that paper-based Delphi methods will likely become obsolete. Commercially available web-based survey tools offer a convenient and affordable means of conducting Delphi research. Researchers and ethics committees may be unaware of the benefits and risks of using metadata in web-based surveys. Discussion paper. Two web-based, three-round Delphi surveys were conducted sequentially between August 2014 - January 2015 and April - May 2016. Their aims were to validate the Australian nurse practitioner metaspecialties and their respective clinical practice standards. Our discussion paper is supported by researcher experience and data obtained from conducting both web-based Delphi surveys. Researchers and ethics committees should consider the benefits and risks of metadata use in web-based survey methods. Web-based Delphi research using paradata and embedded data may introduce efficiencies that improve individual participant survey experiences and reduce attrition across iterations. Use of embedded data allows the efficient conduct of multiple simultaneous Delphi surveys across a shorter timeframe than traditional survey methods. The use of metadata, paradata and embedded data appears to improve response rates, identify bias and give possible explanation for apparent outlier responses, providing an efficient method of conducting web-based Delphi surveys. © 2017 John Wiley & Sons Ltd.

  19. Statistical properties of mean stand biomass estimators in a LIDAR-based double sampling forest survey design.

    Science.gov (United States)

    H.E. Anderson; J. Breidenbach

    2007-01-01

    Airborne laser scanning (LIDAR) can be a valuable tool in double-sampling forest survey designs. LIDAR-derived forest structure metrics are often highly correlated with important forest inventory variables, such as mean stand biomass, and LIDAR-based synthetic regression estimators have the potential to be highly efficient compared to single-stage estimators, which...

  20. Improving the design of amphibian surveys using soil data: A case study in two wilderness areas

    Science.gov (United States)

    Bowen, K.D.; Beever, E.A.; Gafvert, U.B.

    2009-01-01

    Amphibian populations are known, or thought to be, declining worldwide. Although protected natural areas may act as reservoirs of biological integrity and serve as benchmarks for comparison with unprotected areas, they are not immune from population declines and extinctions and should be monitored. Unfortunately, identifying survey sites and performing long-term fieldwork within such (often remote) areas involves a special set of problems. We used the USDA Natural Resource Conservation Service Soil Survey Geographic (SSURGO) Database to identify, a priori, potential habitat for aquatic-breeding amphibians on North and South Manitou Islands, Sleeping Bear Dunes National Lakeshore, Michigan, and compared the results to those obtained using National Wetland Inventory (NWI) data. The SSURGO approach identified more target sites for surveys than the NWI approach, and it identified more small and ephemeral wetlands. Field surveys used a combination of daytime call surveys, night-time call surveys, and perimeter surveys. We found that sites that would not have been identified with NWI data often contained amphibians and, in one case, contained wetland-breeding species that would not have been found using NWI data. Our technique allows for easy a priori identification of numerous survey sites that might not be identified using other sources of spatial information. We recognize, however, that the most effective site identification and survey techniques will likely use a combination of methods in addition to those described here.

  1. Cosmetic Procedure Questions

    Science.gov (United States)

    ... for Every Season How to Choose the Best Skin Care Products In This Section Dermatologic Surgery What is dermatologic ... for Every Season How to Choose the Best Skin Care Products Cosmetic Procedure Questions Want to look younger? Start ...

  2. Rabies: Questions and Answers

    Science.gov (United States)

    Rabies: Questions and Answers Information about the disease and vaccines What causes rabies? Rabies is caused by a virus. The virus invades ... nervous system and disrupts its functioning. How does rabies spread? The rabies virus is transmitted in the ...

  3. Repetitive Questioning Exasperates Caregivers

    Directory of Open Access Journals (Sweden)

    R. C. Hamdy MD

    2018-01-01

    Full Text Available Repetitive questioning is due to an impaired episodic memory and is a frequent, often presenting, problem in patients with Alzheimer’s disease (amnestic type. It is due to the patients’ difficulties learning new information, retaining it, and recalling it, and is often aggravated by a poor attention span and easy distractibility. A number of factors may trigger and maintain repetitive questioning. Caregivers should try to identify and address these triggers. In the case discussion presented, it is due to the patient’s concerns about her and her family’s safety triggered by watching a particularly violent movie aired on TV. What went wrong in the patient/caregiver interaction and how it could have been avoided or averted are explored. Also reviewed are the impact of repetitive questioning, the challenges it raises for caregivers, and some effective intervention strategies that may be useful to diffuse the angst that caregivers experience with repetitive questioning.

  4. CAT questions and answers

    International Nuclear Information System (INIS)

    1993-02-01

    This document, prepared in February 1993, addresses the most common questions asked by APS Collaborative Access Teams (CATs). The answers represent the best judgment on the part of the APS at this time. In some cases, details are provided in separate documents to be supplied by the APS. Some of the answers are brief because details are not yet available. The questions are separated into five categories representing different aspects of CAT interactions with the APS: (1) Memorandum of Understanding (MOU), (2) CAT Beamline Review and Construction, (3) CAT Beamline Safety, (4) CAT Beamline Operations, and (5) Miscellaneous. The APS plans to generate similar documents as needed to both address new questions and clarify answers to present questions

  5. Repetitive Questioning II

    Directory of Open Access Journals (Sweden)

    R. C. Hamdy MD

    2018-02-01

    Full Text Available Repetitive questioning is a major problem for caregivers, particularly taxing if they are unable to recognize and understand the reasons why their loved one keeps asking the same question over and over again. Caregivers may be tempted to believe that the patient does not even try to remember the answer given or is just getting obnoxious. This is incorrect. Repetitive questioning is due to the underlying disease: The patient’s short term memory is impaired and he is unable to register, encode, retain and retrieve the answer. If he is concerned about a particular topic, he will keep asking the same question over and over again. To the patient each time she asks the question, it is as if she asked it for the first time. Just answering repetitive questioning by providing repeatedly the same answer is not sufficient. Caregivers should try to identify the underlying cause for this repetitive questioning. In an earlier case study, the patient was concerned about her and her family’s safety and kept asking whether the doors are locked. In this present case study, the patient does not know how to handle the awkward situation he finds himself in. He just does not know what to do. He is not able to adjust to the new unexpected situation. So he repeatedly wants to reassure himself that he is not intruding by asking the same question over and over again. We discuss how the patient’s son-in-law could have avoided this situation and averted the catastrophic ending.

  6. User Needs in Green ITS : Results of a Questionnaire Survey and Proposal for Green ITS Design

    NARCIS (Netherlands)

    Man, W.Y.; Bie, J.; Van Arem, B.

    2012-01-01

    An internet survey has been conducted among drivers in the Netherlands and Japan to study their attitude towards Green ITS. The survey focuses on driving behavior and ITS experience, attitude towards environment, and Green ITS preferences. The results show that money-related information gives the

  7. A knowledge - based system to assist in the design of soil survey schemes

    NARCIS (Netherlands)

    Domburg, P.

    1994-01-01

    Soil survey information with quantified accuracy is relevant to decisions on land use and environmental problems. To obtain such information statistical strategies should be used for collecting and analysing data. A survey project based on a statistical sampling strategy requires a soil

  8. User needs in green ITS: results of a questionnaire survey and proposal for green ITS design

    NARCIS (Netherlands)

    Man, Wing Yan; Bie, Jing; van Arem, Bart

    2011-01-01

    An internet survey has been conducted among drivers in the Netherlands and Japan to study their attitude towards Green ITS. The survey focuses on driving behavior and ITS experience, attitude towards environment, and Green ITS preferences. The results show that money-related information gives the

  9. Design and analysis of questionnaires for survey skills in chemical engineering

    Directory of Open Access Journals (Sweden)

    Susana Lucas

    2011-09-01

    Full Text Available 800x600 Normal 0 21 false false false CA X-NONE X-NONE The new reorganization of university education has involved relevant changes in teaching and learning methodologies in order to help students to learn more effectively and to develop important skills and competences demanded by the professional world. In this sense the new configuration of the degree in Chemical Engineering required the identification of the main general and transferable skills, the implementation of the new teaching and learning strategies necessary to achieve them and, in addition, an evaluation procedure for determining the importance and the degree of development of a student´s skills and competences. In this exercise, two obligatory chemical reactor engineering subjects of the still in effect Chemical Engineering degree were chosen as examples of competence-based learning disciplines. For each one, a significant group of transferable and specific skills were selected to be developed. The identification and selection of skills was made according to the recommendations of the European Federation of Chemical Engineering (EFCE together with the established requirements in the ministerial order for the new Chemical Engineering Degree (Ministerial order CIN/351/2009. In order to check the effectiveness of teaching strategies in helping students to acquire these abilities, specific questionnaires were designed. These tests allowed for the utility of the competences in question to be evaluated in terms of the students´ professional work as future chemical engineering graduates and also facilitated the perception of skill development acquired through the methodology implemented in these subjects. The results of the skill evaluation questionnaires revealed the importance that both university collectives (students and professors give to the development of transferable skills. These skills included the ability to communicate effectively (including in English, to work in

  10. Report on the Survey of the Design Review of New Reactor Applications. Volume 4: Reactor Coolant and Associated Systems

    International Nuclear Information System (INIS)

    Downey, Steven; Monninger, John; Nevalainen, Janne; Joyer, Philippe; Koley, Jaharlal; Kawamura, Tomonori; Chung, Yeon-Ki; Haluska, Ladislav; Persic, Andreja; Reierson, Craig; Monninger, John; Choi, Young-Joon; )

    2017-01-01

    At the tenth meeting of the Committee on Nuclear Regulatory Activities (CNRA) Working Group on the Regulation of New Reactors (WGRNR) in March 2013, the Working Group agreed to present the responses to the Second Phase, or Design Phase, of the licensing process survey as a multi-volume text. As such, each report will focus on one of the eleven general technical categories covered in the survey. The general technical categories were selected to conform to the topics covered in the International Atomic Energy Agency (IAEA) Safety Guide GS-G-4.1. This report provides a discussion of the survey responses related to the Reactor Coolant and Associated Systems category. The Reactor Coolant and Associated Systems category includes the following technical topics: overpressure protection, reactor coolant pressure boundary, reactor vessel, and design of the reactor coolant system. For each technical topic, the member countries described the information provided by the applicant, the scope and level of detail of the technical review, the technical basis for granting regulatory authorisation, the skill sets required and the level of effort needed to perform the review. Based on a comparison of the information provided by the member countries in response to the survey, the following observations were made: - Although the description of the information provided by the applicant differs in scope and level of detail among the member countries that provided responses, there are similarities in the information that is required. - All of the technical topics covered in the survey are reviewed in some manner by all of the regulatory authorities that provided responses. - It is common to consider operating experience and lessons learnt from the current fleet during the review process. - The most commonly and consistently identified technical expertise needed to perform design reviews related to this category are mechanical engineering and materials engineering. The complete survey

  11. Human factors methods for nuclear control room design. Volume 2. Human factors survey of control room design practices

    International Nuclear Information System (INIS)

    Seminara, J.L.; Parsons, S.O.

    1979-11-01

    An earlier review of the control rooms of operating nuclear power plants identified many design problems having potential for degrading operator performance. As a result, the formal application of human factors principles was found to be needed. This report demonstrates the use of human factors in the design of power plant control rooms. The approaches shown in the report can be applied to operating power plants, as well as to those in the design stage. This study documents human factors techniques required to provide a sustained concern for the man-machine interface from control room concept definition to system implementation

  12. Design Evolution of the Wide Field Infrared Survey Telescope Using Astrophysics Focused Telescope Assets (WFIRST-AFTA) and Lessons Learned

    Science.gov (United States)

    Peabody, Hume L.; Peters, Carlton V.; Rodriguez-Ruiz, Juan E.; McDonald, Carson S.; Content, David A.; Jackson, Clifton E.

    2015-01-01

    The design of the Wide Field Infrared Survey Telescope using Astrophysics Focused Telescope Assets (WFIRST-AFTA) continues to evolve as each design cycle is analyzed. In 2012, two Hubble sized (2.4 m diameter) telescopes were donated to NASA from elsewhere in the Federal Government. NASA began investigating potential uses for these telescopes and identified WFIRST as a mission to benefit from these assets. With an updated, deeper, and sharper field of view than previous design iterations with a smaller telescope, the optical designs of the WFIRST instruments were updated and the mechanical and thermal designs evolved around the new optical layout. Beginning with Design Cycle 3, significant analysis efforts yielded a design and model that could be evaluated for Structural-Thermal-Optical-Performance (STOP) purposes for the Wide Field Imager (WFI) and provided the basis for evaluating the high level observatory requirements. Development of the Cycle 3 thermal model provided some valuable analysis lessons learned and established best practices for future design cycles. However, the Cycle 3 design did include some major liens and evolving requirements which were addressed in the Cycle 4 Design. Some of the design changes are driven by requirements changes, while others are optimizations or solutions to liens from previous cycles. Again in Cycle 4, STOP analysis was performed and further insights into the overall design were gained leading to the Cycle 5 design effort currently underway. This paper seeks to capture the thermal design evolution, with focus on major design drivers, key decisions and their rationale, and lessons learned as the design evolved.

  13. The Question Concerning Thinking

    DEFF Research Database (Denmark)

    Riis, Søren

    2008-01-01

    Martin Heidegger's thought-provoking essay "The Question Concerning Technology" (1977a) placed technology at the heart of philosophy. Heidegger tried to show that the essence of technology provokes humans to think about the world in a very dangerous way. Yet if we follow Heidegger's analysis...... of technology, what role does that ascribe to philosophy? To be able to understand the programmatic scope of Heidegger's question ‘concerning' technology, we need to see it as inseparable from his famous thesis about the end of philosophy (1977c) and what he considers to be the ideal kind of thinking. However......, by doing so, we will in the end realize two important things. First, that Heidegger's declaration of the end of philosophy in fact also means the end of anything we can meaningfully call thinking. Second, that Heidegger's own thinking is completely different from his own ideal of thinking. Our question...

  14. Generating ethnographic research questions

    DEFF Research Database (Denmark)

    Friberg, Torbjörn

    2015-01-01

    ? By drawing on the conceptual history of anthropology, the aim of this article is to generate ethnographic-oriented research questions concerned with higher education. The first part of the article provides an ethnographic background, while the second part focuses on Paul Willis's reasoning on ethnographic......As part of recent complex transformations, it seems that higher educational organisations are being forced to reorganise, standardise and streamline in order to survive in the new political and economic context. How are ethnographers in general going to approach these contemporary phenomena...... imagination, as a prerequisite for generating alternative research questions. The third part makes explicit anthropologist Maurice Godelier's theoretical imagination, carving out some specific theoretical parts which may be used in the generating process. The conclusion then suggests a number of questions...

  15. A comparison of GPR performance at various frequencies - a guide to improved survey design

    CSIR Research Space (South Africa)

    Kgarume, Thabang E

    2015-09-01

    Full Text Available This paper aims to demonstrate, through practical examples and numerical modelling, the trade-off between range and resolution in ground penetrating radar (GPR) prospecting. GPR surveys can easily fail when the target and host rock properties...

  16. More with thermal energy storage. Report 2. Literature survey. Overview of knowledge and research questions with regard to thermal energy storage. Final report; Meer met bodemenergie. Rapport 2. Literatuuronderzoek. Overzicht van kennis en onderzoeksvragen rondom bodemenergie. Eindrapport

    Energy Technology Data Exchange (ETDEWEB)

    Lieten, S.; De Vries, E. [Bioclear, Groningen (Netherlands); Van Baaren, E.; Bakr, M.; Oude Essink, G.; Hartog, N.; Meinderstma, W.; Van Nieuwkerk, E.; Van Oostrom, N.; Woning, M. [Deltares, Delft (Netherlands); Drijver, B.; Krajenbrink, H.; Mathijssen, H.; Wennekes, R. [IF Technology, Arnhem (Netherlands)

    2012-03-30

    The project More With Thermal Energy Storage (MMB, abbreviated in Dutch) focuses on knowledge gaps and potential opportunities regarding open systems. The main questions to be answered are: (1) What effects (hydrological, thermal, microbiological and chemical) occur in the soil system by application of thermal energy storage; (2) Which technical options are available for a sustainable integration of thermal energy storage in the water and energy chain?; (3) Is it possible to achieve multiple objectives by using smart combinations? The project is organized in different work packages. In work package 2, the effects of individual and collective thermal energy storage storage systems on subsoils and the environment are determined. In work package 3 the opportunities for thermal energy storage and soil remediation are examined, while in work package 4 the focus is on new sustainable combinations of heat and cold storage. Work package 1 is the umbrella part where communication and policy of and participation in MMB are the main subjects. The aim of this literature survey is to search for knowledge that is available worldwide on the effects of heat and cold storage and the possibilities to combine this technology with controlling contaminants in soil and groundwater [Dutch] Het project Meer Met Bodemenergie (MMB) richt zich op het invullen van kennisleemtes en mogelijke kansen ten aanzien van open systemen. De belangrijkste vragen waarop het onderzoeksprogramma MMB antwoord geeft zijn: (1) Welke effecten (hydrologisch, thermisch, microbiologisch en chemisch) treden op in het bodemsysteem bij toepassing van bodemenergie?; (2) Welke technische mogelijkheden zijn er voor het duurzaam inpassen van bodem-energie in de water- en energieketen?; (3) Is het mogelijk om meerdere doelstellingen tegelijk te verwezenlijken door slimme combinaties te maken? Het project is ingericht met verschillende werkpakketten. In werkpakket 2 worden de effecten van individuele en collectieve

  17. [Design and implementation of data reporting system for Chinese materia medica resources survey].

    Science.gov (United States)

    Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jing, Zhi-Xian; Wang, Ling; Zhao, Yu-Ping; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    The collection, summary and sharing of all kinds of survey data are one of the main tasks and achievements in the national census of Chinese materia medica resources organized and implemented by the State Administration of Traditional Chinese Medicine. It is a key link in the implementation of the national census of Chinese materia medica resources. Based on the client / server architecture, the data reporting system for Chinese materia medica resources survey has been established for reporting system application model of geospatial data service based on Web implementation, through the SOA framework, to achieve the data collection summary of the seven aspects of the local data configuration, data reporting, data verification, data reporting, PDA data import and export, APP data import, track instrument data import. The system services include the general investigation, the focus of investigation, specimen information, herbs sample information, market research, germplasm survey, traditional knowledge survey of these seven aspects of the 312 indicators of the report, serving the Chinese materia medica resource survey of field survey data collection and internal data collation. The system provides the technical support for the national census of Chinese materia medica resources, improves the efficiency of the census of Chinese materia medica resources, and is conducive to the long-term preservation of the data of Chinese materia medica resources census, the transformation and sharing of the results. Copyright© by the Chinese Pharmaceutical Association.

  18. Radiation protection in questions and answers

    International Nuclear Information System (INIS)

    Ewen, K.; Hoppe, G.

    1976-01-01

    An easily surveyable catalogue of questions is presented which is to make it easier for medical personnel to get acquainted with the basic knowledge according to the X-ray Ordinance and to acquire the expert knowledge in radiation protection. The catalogue is arranged according to different subjects. There are several alternative answers to every question. The right answer is given in the solution index (annex). (HP) [de

  19. The social question revisited

    DEFF Research Database (Denmark)

    Kenneth, Petersson; Olsson, Ulf; Krejsler, John B.

    2015-01-01

    The focus of this chapter is the re-installation of the social question as a historical practice. The purpose is to investigate how historic figures return and are applied in contemporary political discourses, more precisely in the context of education, education policy and teacher education...

  20. Questioning Danish Cartoon Images

    DEFF Research Database (Denmark)

    Bojsen, Heidi

    2007-01-01

    Danes today when it is considered demeaning and racist in most other countries. The conclusion does emphatically not plead in favour of law enforced limitations of the freedom of expression, but does question the prevalent "freedom of ignorance" concerning black identities which means...

  1. Survey Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Cleaned and QCd data for the Fishing Effort Survey. Questions on fishing and other out are asked on weather and outdoor activity, including fishing trips. Used for...

  2. A Survey of Structural Design of Diagnostic X-ray Imaging Facilities and Compliance to Shielding Design Goals in a Limited Resource Setting

    Directory of Open Access Journals (Sweden)

    Flavious B. Nkubli

    2017-11-01

    Full Text Available Purpose: To survey structural designs of x-ray rooms and compliance to shielding design goals of three x-ray imaging facilities. Methods and Materials: The survey was conducted in three radiodiagnostic centers in South East Nigeria, labeled X, Y and Z for anonymity. A stretchable non-elastic meter rule was used to measure x-ray room dimensions. A Vernier caliper was used to measure lead thickness while a calibrated digital survey meter Radalert 100x was used for radiation survey of controlled and uncontrolled areas. Simple statistical tools such as mean and standard deviation were used for analysis with the aid of Microsoft Excel version 2007. Results: Center X had a room dimension of 2.4 m × 2.1 m, Center Y had an x-ray room dimension of 3.6 m × 3.3 m, and Center Z had two x-ray rooms with identical dimensions of 6.3 m × 3.6 m. Measured exit radiation doses for controlled areas in all the centers were: 0.00152 mSv/wk; 0.00496 mSv/wk; 0.00168 mSv/wk; 0.00224 mSv/wk respectively. Lead was the common shielding material used. Conclusion: Based on the parameters studied, Center Z had the ideal room size and layout. Relative distances from the x-ray tubes to the nearest walls were not optimized in all the centers except in Center Z. Measured exit doses were within recommended limits except in Center Y. The location of the control consoles and measured doses were appropriate and within recommended design goals.

  3. [New design of the Health Survey of Catalonia (Spain, 2010-2014): a step forward in health planning and evaluation].

    Science.gov (United States)

    Alcañiz-Zanón, Manuela; Mompart-Penina, Anna; Guillén-Estany, Montserrat; Medina-Bustos, Antonia; Aragay-Barbany, Josep M; Brugulat-Guiteras, Pilar; Tresserras-Gaju, Ricard

    2014-01-01

    This article presents the genesis of the Health Survey of Catalonia (Spain, 2010-2014) with its semiannual subsamples and explains the basic characteristics of its multistage sampling design. In comparison with previous surveys, the organizational advantages of this new statistical operation include rapid data availability and the ability to continuously monitor the population. The main benefits are timeliness in the production of indicators and the possibility of introducing new topics through the supplemental questionnaire as a function of needs. Limitations consist of the complexity of the sample design and the lack of longitudinal follow-up of the sample. Suitable sampling weights for each specific subsample are necessary for any statistical analysis of micro-data. Accuracy in the analysis of territorial disaggregation or population subgroups increases if annual samples are accumulated. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

  4. Augmenting Fellow Education Through Spaced Multiple-Choice Questions.

    Science.gov (United States)

    Barsoumian, Alice E; Yun, Heather C

    2018-01-01

    The San Antonio Uniformed Services Health Education Consortium Infectious Disease Fellowship program historically included a monthly short-answer and multiple-choice quiz. The intent was to ensure medical knowledge in relevant content areas that may not be addressed through clinical rotations, such as operationally relevant infectious disease. After completion, it was discussed in a small group with faculty. Over time, faculty noted increasing dissatisfaction with the activity. Spaced interval education is useful in retention of medical knowledge and skills by medical students and residents. Its use in infectious disease fellow education has not been described. To improve the quiz experience, we assessed the introduction of spaced education curriculum in our program. A pre-intervention survey was distributed to assess the monthly quiz with Likert scale and open-ended questions. A multiple-choice question spaced education curriculum was created using the Qstream(R) platform in 2011. Faculty development on question writing was conducted. Two questions were delivered every 2 d. Incorrectly and correctly answered questions were repeated after 7 and 13 d, respectively. Questions needed to be answered correctly twice to be retired. Fellow satisfaction was assessed at semi-annual fellowship reviews over 5 yr and by a one-time repeat survey. Pre-intervention survey of six fellows indicated dissatisfaction with the time commitment of the monthly quiz (median Likert score of 2, mean 6.5 h to complete), neutral in perceived utility, but satisfaction with knowledge retention (Likert score 4). Eighteen fellows over 5 yr participated in the spaced education curriculum. Three quizzes with 20, 39, and 48 questions were designed. Seventeen percentage of questions addressed operationally relevant topics. Fifty-nine percentage of questions were answered correctly on first attempt, improving to 93% correct answer rate at the end of the analysis. Questions were attempted 2,999 times

  5. Design of a Mars Airplane Propulsion System for the Aerial Regional-Scale Environmental Survey (ARES) Mission Concept

    Science.gov (United States)

    Kuhl, Christopher A.

    2008-01-01

    The Aerial Regional-Scale Environmental Survey (ARES) is a Mars exploration mission concept that utilizes a rocket propelled airplane to take scientific measurements of atmospheric, surface, and subsurface phenomena. The liquid rocket propulsion system design has matured through several design cycles and trade studies since the inception of the ARES concept in 2002. This paper describes the process of selecting a bipropellant system over other propulsion system options, and provides details on the rocket system design, thrusters, propellant tank and PMD design, propellant isolation, and flow control hardware. The paper also summarizes computer model results of thruster plume interactions and simulated flight performance. The airplane has a 6.25 m wingspan with a total wet mass of 185 kg and has to ability to fly over 600 km through the atmosphere of Mars with 45 kg of MMH / MON3 propellant.

  6. A statistical evaluation of the design and precision of the shrimp trawl survey off West Greenland

    DEFF Research Database (Denmark)

    Folmer, Ole; Pennington, M.

    2000-01-01

    statistical techniques were used to estimate two indices of shrimp abundance and their precision, and to determine the effective sample sizes for estimates of length-frequency distributions. It is concluded that the surveys produce a fairly precise abundance index, and that given the relatively small...... effective sample size, reducing tow duration to 15 min would increase overall survey precision. An unexpected outcome of the analysis is that the density of shrimp appears to have been fairly stable over the last 11 years. (C) 2000 Elsevier Science B.V. All rights reserved....

  7. Designing future dark energy space missions. II. Photometric redshift of space weak lensing optimized surveys

    Science.gov (United States)

    Jouvel, S.; Kneib, J.-P.; Bernstein, G.; Ilbert, O.; Jelinsky, P.; Milliard, B.; Ealet, A.; Schimd, C.; Dahlen, T.; Arnouts, S.

    2011-08-01

    Context. With the discovery of the accelerated expansion of the universe, different observational probes have been proposed to investigate the presence of dark energy, including possible modifications to the gravitation laws by accurately measuring the expansion of the Universe and the growth of structures. We need to optimize the return from future dark energy surveys to obtain the best results from these probes. Aims: A high precision weak-lensing analysis requires not an only accurate measurement of galaxy shapes but also a precise and unbiased measurement of galaxy redshifts. The survey strategy has to be defined following both the photometric redshift and shape measurement accuracy. Methods: We define the key properties of the weak-lensing instrument and compute the effective PSF and the overall throughput and sensitivities. We then investigate the impact of the pixel scale on the sampling of the effective PSF, and place upper limits on the pixel scale. We then define the survey strategy computing the survey area including in particular both the Galactic absorption and Zodiacal light variation accross the sky. Using the Le Phare photometric redshift code and realistic galaxy mock catalog, we investigate the properties of different filter-sets and the importance of the u-band photometry quality to optimize the photometric redshift and the dark energy figure of merit (FoM). Results: Using the predicted photometric redshift quality, simple shape measurement requirements, and a proper sky model, we explore what could be an optimal weak-lensing dark energy mission based on FoM calculation. We find that we can derive the most accurate the photometric redshifts for the bulk of the faint galaxy population when filters have a resolution ℛ ~ 3.2. We show that an optimal mission would survey the sky through eight filters using two cameras (visible and near infrared). Assuming a five-year mission duration, a mirror size of 1.5 m and a 0.5 deg2 FOV with a visible pixel

  8. Questions about elastic waves

    CERN Document Server

    Engelbrecht, Jüri

    2015-01-01

    This book addresses the modelling of mechanical waves by asking the right questions about them and trying to find suitable answers. The questions follow the analytical sequence from elementary understandings to complicated cases, following a step-by-step path towards increased knowledge. The focus is on waves in elastic solids, although some examples also concern non-conservative cases for the sake of completeness. Special attention is paid to the understanding of the influence of microstructure, nonlinearity and internal variables in continua. With the help of many mathematical models for describing waves, physical phenomena concerning wave dispersion, nonlinear effects, emergence of solitary waves, scales and hierarchies of waves as well as the governing physical parameters are analysed. Also, the energy balance in waves and non-conservative models with energy influx are discussed. Finally, all answers are interwoven into the canvas of complexity.

  9. Ten Questions about Emergence

    OpenAIRE

    Fromm, Jochen

    2005-01-01

    Self-Organization is of growing importance for large distributed computing systems. In these systems, a central control and manual management is exceedingly difficult or even impossible. Emergence is widely recognized as the core principle behind self-organization. Therefore the idea to use both principles to control and organize large-scale distributed systems is very attractive and not so far off. Yet there are many open questions about emergence and self-organization, ranging from a clear ...

  10. 501 reading comprehension questions

    CERN Document Server

    2014-01-01

    This updated edition offers the most extensive and varied practice for all types of questions students might face on standardized and in-class tests. With this guide, students will learn to develop expert reading strategies, understand how to read faster and with greater comprehension, overcome reading anxiety, and increase appreciation of reading for pleasure. This book's step-by-step approach provides graduated coverage that moves from the basics to more advanced reading.

  11. Eight Questions about Corruption

    OpenAIRE

    Jakob Svensson

    2005-01-01

    This paper will discuss eight frequently asked questions about public corruption: (1) What is corruption? (2) Which countries are the most corrupt? (3) What are the common characteristics of countries with high corruption? (4) What is the magnitude of corruption? (5) Do higher wages for bureaucrats reduce corruption? (6) Can competition reduce corruption? (7) Why have there been so few (recent) successful attempts to fight corruption? (8) Does corruption adversely affect growth?

  12. Report of the Survey on the Design Review of New Reactor Applications. Volume 1 - Instrumentation and Control

    International Nuclear Information System (INIS)

    Downey, Steven

    2014-06-01

    At the tenth meeting of the CNRA Working Group on the Regulation of New Reactors (WGRNR) in March 2013, the members agreed to present the responses to the Second Phase, or Design Phase, of the Licensing Process Survey as a multi-volume text. As such, each report will focus on one of the eleven general technical categories covered in the survey. The general technical categories were selected to conform to the topics covered in the International Atomic Energy Agency (IAEA) Safety Guide GS-G-4.1. This report, which is the first volume, provides a discussion of the survey responses related to Instrumentation and Control (I and C). The Instrumentation and Control category includes the twelve following technical topics: Reactor trip system, actuation systems for Engineered Safety Features (ESF), safe shutdown system, safety-related display instrumentation, information and interlock systems important to safety, controls systems, main control room, supplementary control room, diverse I and C systems, data communication systems, software reliability and cyber-security. For each technical topic, the member countries described the information provided by the applicant, the scope and level of detail of the technical review, the technical basis for granting regulatory authorisation, the skill sets required and the Level of effort needed to perform the review. Based on a comparison of the information provided in response to the survey, the following observations were made: - Among the regulatory organisations that responded to the survey, there are similarities in the design information provided by an applicant. In most countries, the design information provided by an applicant includes, but is not limited to, a description of the I and C system design and functions, a description of the verification and validation programmes, and provisions for analysis, testing, and inspection of various I and C systems. - In addition to the regulations, it is a common practice for countries

  13. Web-based survey design for unravelling semi-compensatory choice in transport and urban planning

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Bekhor, Shlomo; Shiftan, Yoram

    2012-01-01

    The estimation of semi-compensatory models is gaining momentum in transport planning in recent years. However, traditional survey methodologies focus on collecting solely compensatory choice data, which leads to information loss when semi-compensatory models are estimated. The present study...

  14. The Outer Solar System Origins Survey. I. ; Design and First-Quarter Discoveries

    Science.gov (United States)

    Bannister, Michele T.; Kavelaars, J. J.; Petit, Jean-Marc; Gladman, Brett J.; Gwyn, Stephen D. J.; Chen, Ying-Tung; Volk, Kathryn; Alexandersen, Mike; Benecchi, Susan D.; Delsanti, Audrey; hide

    2016-01-01

    We report the discovery, tracking, and detection circumstances for 85 trans-Neptunian objects (TNOs) from the first 42 square degrees of the Outer Solar System Origins Survey. This ongoing r-band solar system survey uses the 0.9 square degree field of view MegaPrime camera on the 3.6 meter Canada-France-Hawaii Telescope. Our orbital elements for these TNOs are precise to a fractional semimajor axis uncertainty of less than 0.1 percent. We achieve this precision in just two oppositions, as compared to the normal three to five oppositions, via a dense observing cadence and innovative astrometric technique. These discoveries are free of ephemeris bias, a first for large trans-Neptunian surveys. We also provide the necessary information to enable models of TNO orbital distributions to be tested against our TNO sample. We confirm the existence of a cold "kernel" of objects within the main cold classical Kuiper Belt and infer the existence of an extension of the "stirred" cold classical Kuiper Belt to at least several au beyond the 2:1 mean motion resonance with Neptune. We find that the population model of Petit et al. remains a plausible representation of the Kuiper Belt. The full survey, to be completed in 2017, will provide an exquisitely characterized sample of important resonant TNO populations, ideal for testing models of giant planet migration during the early history of the solar system.

  15. The Tianjin Mental Health Survey (TJMHS) : study rationale, design and methods

    NARCIS (Netherlands)

    Yin, Huifang; Phillips, Michael R; Wardenaar, Klaas J; Xu, Guangming; Ormel, Johan; Tian, Hongjun; Schoevers, Robert A

    Mental health in China is of growing concern to both policy-makers and researchers. The Tianjin Mental Health Survey (TJMHS) was conducted between July 2011 and March 2012 to assess the prevalence and risk factors of mental disorders in the context of recent economic growth and other

  16. The TRacking Adolescents' Individual Lives Survey (TRAILS) : Design, Current Status, and Selected Findings

    NARCIS (Netherlands)

    Ormel, Johan; Oldehinkel, Albertine J; Sijtsema, Jelle; van Oort, Floor; Raven, Dennis; Veenstra, Rene; Vollebergh, Wilma A M; Verhulst, Frank C

    2012-01-01

    Objectives: The objectives of this study were as follows: to present a concise overview of the sample, outcomes, determinants, non-response and attrition of the ongoing TRacking Adolescents' Individual Lives Survey (TRAILS), which started in 2001; to summarize a selection of recent findings on

  17. A design of strategic alliance based on value chain of surveying and mapping enterprises in China

    Science.gov (United States)

    Duan, Hong; Huang, Xianfeng

    2007-06-01

    In this paper, we use value chain and strategic alliance theories to analyzing the surveying and mapping Industry and enterprises. The value chain of surveying and mapping enterprises is highly-contacted but split by administrative interference, the enterprises are common small scale. According to the above things, we consider that establishing a nonequity- Holding strategic alliance based on value chain is an available way, it can not only let the enterprises share the superior resources in different sectors of the whole value chain each other but avoid offending the interests of related administrative departments, by this way, the surveying and mapping enterprises gain development respectively and totally. Then, we give the method to building up the strategic alliance model through parting the value chain and the using advantage of companies in different value chain sectors. Finally, we analyze the internal rule of strategic alliance and prove it is a suitable way to realize the development of surveying and mapping enterprises through game theory.

  18. Design, implementation, and analysis methods for the National Woodland Owner Survey

    Science.gov (United States)

    Brett J. Butler; Earl C. Leatherberry; Michael S. Williams; Michael S. Williams

    2005-01-01

    The National Woodland Owner Survey (NWOS) is conducted by the USDA Forest Service, Forest Inventory and Analysis program to increase our understanding of private forest-land owners in the United States. The information is intended to help policy makers, resource managers, and others interested in the forest resources of the United States better understand the social...

  19. Coherent Power Analysis in Multi-Level Studies Using Design Parameters from Surveys

    Science.gov (United States)

    Rhoads, Christopher

    2016-01-01

    Current practice for conducting power analyses in hierarchical trials using survey based ICC and effect size estimates may be misestimating power because ICCs are not being adjusted to account for treatment effect heterogeneity. Results presented in Table 1 show that the necessary adjustments can be quite large or quite small. Furthermore, power…

  20. USDA Forest Service National Woodland Owner Survey, 2011-2013: design, implementation, and estimation methods

    Science.gov (United States)

    Brett J. Butler; Brenton J. Dickinson; Jaketon H. Hewes; Sarah M. Butler; Kyle Andrejczyk; Marla. Markowski-Lindsay

    2016-01-01

    The National Woodland Owner Survey (NWOS) is conducted by the U.S. Forest Service, Forest Inventory and Analysis program to increase the understanding of the attitudes, behaviors, and demographics of private forest and woodland ownerships across the United States. The information is intended to help policy makers, resource managers, educators, service providers, and...

  1. The TRacking Adolescents' Individual Lives Survey (TRAILS): Design, Current Status, and Selected Findings

    Science.gov (United States)

    Ormel, Johan; Oldehinkel, Albertine J.; Sijtsema, Jelle; van Oort, Floor; Raven, Dennis; Veenstra, Rene; Vollebergh, Wilma A. M.; Verhulst, Frank C.

    2012-01-01

    Objectives: The objectives of this study were as follows: to present a concise overview of the sample, outcomes, determinants, non-response and attrition of the ongoing TRacking Adolescents' Individual Lives Survey (TRAILS), which started in 2001; to summarize a selection of recent findings on continuity, discontinuity, risk, and protective…

  2. SDSS-IV MaNGA IFS GALAXY SURVEY—SURVEY DESIGN, EXECUTION, AND INITIAL DATA QUALITY

    International Nuclear Information System (INIS)

    Yan, Renbin; Zhang, Kai; Bundy, Kevin; Law, David R.; Bershady, Matthew A.; Diamond-Stanic, Aleksandar M.; Andrews, Brett; Cherinka, Brian; Drory, Niv; MacDonald, Nicholas; Sánchez-Gallego, José R.; Thomas, Daniel; Westfall, Kyle B.; Wake, David A.; Weijmans, Anne-Marie; Aragón-Salamanca, Alfonso; Belfiore, Francesco

    2016-01-01

    The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy for 10,000 nearby galaxies at a spectral resolution of R  ∼ 2000 from 3622 to 10354 Å. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star formation rate surface density, gas metallicity, stellar population age, metallicity, and abundance ratio, and their gradients; stellar and gas kinematics; and enclosed gravitational mass as a function of radius. We describe how these science requirements set the depth of the observations and dictate sample selection. The majority of targeted galaxies are selected to ensure uniform spatial coverage in units of effective radius (R e ) while maximizing spatial resolution. About two-thirds of the sample is covered out to 1.5 R e (Primary sample), and one-third of the sample is covered to 2.5 R e (Secondary sample). We describe the survey execution with details that would be useful in the design of similar future surveys. We also present statistics on the achieved data quality, specifically the point-spread function, sampling uniformity, spectral resolution, sky subtraction, and flux calibration. For our Primary sample, the median r -band signal-to-noise ratio is ∼70 per 1.4 Å pixel for spectra stacked between 1 R e and 1.5 R e . Measurements of various galaxy properties from the first-year data show that we are meeting or exceeding the defined requirements for the majority of our science goals.

  3. SDSS-IV MaNGA IFS GALAXY SURVEY—SURVEY DESIGN, EXECUTION, AND INITIAL DATA QUALITY

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Renbin; Zhang, Kai [Department of Physics and Astronomy, University of Kentucky, 505 Rose Street, Lexington, KY 40506-0057 (United States); Bundy, Kevin [Kavli IPMU (WPI), UTIAS, The University of Tokyo, Kashiwa, Chiba 277-8583 (Japan); Law, David R. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Bershady, Matthew A.; Diamond-Stanic, Aleksandar M. [Department of Astronomy, University of Winsconsin-Madison, 475 N. Charter Street, Madison, WI 53706-1582 (United States); Andrews, Brett [Department of Physics and Astronomy and Pittsburgh Particle Physics, Astrophysics and Cosmology Center (PITT PACC), University of Pittsburgh, 3941 OHara Street, Pittsburgh, PA 15260 (United States); Cherinka, Brian [Department of Physics and Astronomy, Johns Hopkins University, Bloomberg Center, 3400 N. Charles Street, Baltimore, MD 21218 (United States); Drory, Niv [McDonald Observatory, University of Texas at Austin, 1 University Station, Austin, TX 78712-0259 (United States); MacDonald, Nicholas; Sánchez-Gallego, José R. [Department of Astronomy, Box 351580, University of Washington, Seattle, WA 98195 (United States); Thomas, Daniel; Westfall, Kyle B. [Institute of Cosmology and Gravitation, University of Portsmouth, Portsmouth (United Kingdom); Wake, David A. [Department of Physical Sciences, The Open University, Milton Keynes, MK7 6AA (United Kingdom); Weijmans, Anne-Marie [School of Physics and Astronomy, University of St Andrews, North Haugh, St Andrews KY16 9SS (United Kingdom); Aragón-Salamanca, Alfonso [School of Physics and Astronomy, University of Nottingham, University Park, Nottingham NG7 2RD (United Kingdom); Belfiore, Francesco, E-mail: yanrenbin@uky.edu [Cavendish Laboratory, University of Cambridge, 19 J. J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom); and others

    2016-12-01

    The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy for 10,000 nearby galaxies at a spectral resolution of R  ∼ 2000 from 3622 to 10354 Å. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star formation rate surface density, gas metallicity, stellar population age, metallicity, and abundance ratio, and their gradients; stellar and gas kinematics; and enclosed gravitational mass as a function of radius. We describe how these science requirements set the depth of the observations and dictate sample selection. The majority of targeted galaxies are selected to ensure uniform spatial coverage in units of effective radius (R{sub e}) while maximizing spatial resolution. About two-thirds of the sample is covered out to 1.5 R{sub e} (Primary sample), and one-third of the sample is covered to 2.5 R{sub e} (Secondary sample). We describe the survey execution with details that would be useful in the design of similar future surveys. We also present statistics on the achieved data quality, specifically the point-spread function, sampling uniformity, spectral resolution, sky subtraction, and flux calibration. For our Primary sample, the median r -band signal-to-noise ratio is ∼70 per 1.4 Å pixel for spectra stacked between 1 R{sub e} and 1.5 R{sub e}. Measurements of various galaxy properties from the first-year data show that we are meeting or exceeding the defined requirements for the majority of our science goals.

  4. SDSS-IV MaNGA IFS Galaxy Survey—Survey Design, Execution, and Initial Data Quality

    Science.gov (United States)

    Yan, Renbin; Bundy, Kevin; Law, David R.; Bershady, Matthew A.; Andrews, Brett; Cherinka, Brian; Diamond-Stanic, Aleksandar M.; Drory, Niv; MacDonald, Nicholas; Sánchez-Gallego, José R.; Thomas, Daniel; Wake, David A.; Weijmans, Anne-Marie; Westfall, Kyle B.; Zhang, Kai; Aragón-Salamanca, Alfonso; Belfiore, Francesco; Bizyaev, Dmitry; Blanc, Guillermo A.; Blanton, Michael R.; Brownstein, Joel; Cappellari, Michele; D'Souza, Richard; Emsellem, Eric; Fu, Hai; Gaulme, Patrick; Graham, Mark T.; Goddard, Daniel; Gunn, James E.; Harding, Paul; Jones, Amy; Kinemuchi, Karen; Li, Cheng; Li, Hongyu; Maiolino, Roberto; Mao, Shude; Maraston, Claudia; Masters, Karen; Merrifield, Michael R.; Oravetz, Daniel; Pan, Kaike; Parejko, John K.; Sanchez, Sebastian F.; Schlegel, David; Simmons, Audrey; Thanjavur, Karun; Tinker, Jeremy; Tremonti, Christy; van den Bosch, Remco; Zheng, Zheng

    2016-12-01

    The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy for 10,000 nearby galaxies at a spectral resolution of R ˜ 2000 from 3622 to 10354 Å. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star formation rate surface density, gas metallicity, stellar population age, metallicity, and abundance ratio, and their gradients; stellar and gas kinematics; and enclosed gravitational mass as a function of radius. We describe how these science requirements set the depth of the observations and dictate sample selection. The majority of targeted galaxies are selected to ensure uniform spatial coverage in units of effective radius (R e ) while maximizing spatial resolution. About two-thirds of the sample is covered out to 1.5R e (Primary sample), and one-third of the sample is covered to 2.5R e (Secondary sample). We describe the survey execution with details that would be useful in the design of similar future surveys. We also present statistics on the achieved data quality, specifically the point-spread function, sampling uniformity, spectral resolution, sky subtraction, and flux calibration. For our Primary sample, the median r-band signal-to-noise ratio is ˜70 per 1.4 Å pixel for spectra stacked between 1R e and 1.5R e . Measurements of various galaxy properties from the first-year data show that we are meeting or exceeding the defined requirements for the majority of our science goals.

  5. Optical Design of the Camera for Transiting Exoplanet Survey Satellite (TESS)

    Science.gov (United States)

    Chrisp, Michael; Clark, Kristin; Primeau, Brian; Dalpiaz, Michael; Lennon, Joseph

    2015-01-01

    The optical design of the wide field of view refractive camera, 34 degrees diagonal field, for the TESS payload is described. This fast f/1.4 cryogenic camera, operating at -75 C, has no vignetting for maximum light gathering within the size and weight constraints. Four of these cameras capture full frames of star images for photometric searches of planet crossings. The optical design evolution, from the initial Petzval design, took advantage of Forbes aspheres to develop a hybrid design form. This maximized the correction from the two aspherics resulting in a reduction of average spot size by sixty percent in the final design. An external long wavelength pass filter was replaced by an internal filter coating on a lens to save weight, and has been fabricated to meet the specifications. The stray light requirements were met by an extended lens hood baffle design, giving the necessary off-axis attenuation.

  6. Survey of waste package designs for disposal of high-level waste/spent fuel in selected foreign countries

    International Nuclear Information System (INIS)

    Schneider, K.J.; Lakey, L.T.; Silviera, D.J.

    1989-09-01

    This report presents the results of a survey of the waste package strategies for seven western countries with active nuclear power programs that are pursuing disposal of spent nuclear fuel or high-level wastes in deep geologic rock formations. Information, current as of January 1989, is given on the leading waste package concepts for Belgium, Canada, France, Federal Republic of Germany, Sweden, Switzerland, and the United Kingdom. All but two of the countries surveyed (France and the UK) have developed design concepts for their repositories, but none of the countries has developed its final waste repository or package concept. Waste package concepts are under study in all the countries surveyed, except the UK. Most of the countries have not yet developed a reference concept and are considering several concepts. Most of the information presented in this report is for the current reference or leading concepts. All canisters for the wastes are cylindrical, and are made of metal (stainless steel, mild steel, titanium, or copper). The canister concepts have relatively thin walls, except those for spent fuel in Sweden and Germany. Diagrams are presented for the reference or leading concepts for canisters for the countries surveyed. The expected lifetimes of the conceptual canisters in their respective disposal environment are typically 500 to 1,000 years, with Sweden's copper canister expected to last as long as one million years. Overpack containers that would contain the canisters are being considered in some of the countries. All of the countries surveyed, except one (Germany) are currently planning to utilize a buffer material (typically bentonite) surrounding the disposal package in the repository. Most of the countries surveyed plan to limit the maximum temperature in the buffer material to about 100 degree C. 52 refs., 9 figs

  7. Sustainable building design in practice – survey among Danish DGNB consultants

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla; Bejder, Anne Kirkegaard

    2017-01-01

    and support the iterative design process in the initial design phases. Therefore, the objective of this paper is to investigate the design process on a more common level experienced by Danish DGNB consultants when designing sustainable buildings using the Danish DGNB certification scheme and thereby possibly......Sustainability certification schemes experience growing popularity. Denmark got its own sustainability certification scheme based on the German DGNB certification scheme. Previous work based on four case studies – DGNB certified healthcare centres, suggests further research on how to improve...

  8. Survey of perceived influence of the conceptual design model of interactive television advertising towards impulse purchase tendency

    Science.gov (United States)

    Sarif, Siti Mahfuzah; Omar, Azizah Che; Shiratuddin, Norshuhada

    2016-08-01

    With the proliferation of technology assisted shopping, there is growing evidence that impulse buying is an emerging phenomenon, which has been the focus of this study. Literatures indicate that studies related to impulse purchase for interactive television (iTV) advertising are highly scarce. It was found that most of the existing impulse purchase elements are mainly focusing on traditional retail store, website advertising, and traditional TV advertising, but not on iTV advertising. Due to that, through a systematic process, a design model for developing iTV advertising with influence towards impulse purchase tendency was developed and tested in this study. The design model is named as iTVAdIP and comprises of three main components; technology, impulse purchase components, and development process. This paper describes the survey, which measures the influence of iTVAdIP design model towards impulse purchase tendency. 37 potential advertising designers were involved in the survey. The results indicate that the iTVAdIP is practical and workable in developing iTV advertisement that could influence consumer to buy the advertised product.

  9. The question about paleoinformatics

    Science.gov (United States)

    Vartic, Andrei

    2006-12-01

    The author is treating questions about development of informatics in ancient Dacia during Y-th Century B.C. - 2-nd Century A.C. He is introducing a new terminology (paleoinformatics) in view of defining the interests of Daces in numbering, the elementary numbers theory and various aspects of numbers representation. A relation between elementary numbers theory and informatisation has been discussed. A particular interest has been given to calculation of the Circle length/Diameter ratio (number Pi), its calculation by Daces.

  10. Question of neutrino mass

    International Nuclear Information System (INIS)

    Branco, G.C.; Senjanovic, G.

    1978-01-01

    We investigate the question of neutrino mass in theories in which neutrinos are four-component Dirac particles. Our analysis is done in the framework of left-right--symmetric theories. The requirement of calculability and natural smallness of neutrino mass leads to the following constraints: (i) left and right charged weak currents must be ''orthogonal'' to each other, and (ii) there should be no W/sub L/-W/sub R/ mixing at the three level. Finally, we exhibit a model in which, due to the existence of an unbroken symmetry of the total Lagrangian, the electron and muon neutrinos remain massless to all orders in perturbation theory

  11. Social Epistemology: 5 Questions

    DEFF Research Database (Denmark)

    Social Epistemology: 5 Questions is a collection of interviews with some of the world’s most influential scholars working on social epistemology from a range of disciplinary perspectives. We hear their views on social epistemology; its aim, scope, use, broader intellectual environment, future...... direction, and how the work of the interviewees fits in these respects. Interviews with David Bloor, Cristina Bicchieri, Richard Bradley, Lorraine Code, Hans van Ditmarsch, Miranda Fricker, Steve Fuller, Sanford Goldberg, Alvin Goldman, Philip Kitcher, Martin Kusch, Jennifer Lackey, Helen E. Longino, Philip...

  12. Design Thinking in Integrated STEAM Learning: Surveying the Landscape and Exploring Exemplars in Elementary Grades

    Science.gov (United States)

    Cook, Kristin L.; Bush, Sarah B.

    2018-01-01

    Complementing the aims of problem-based inquiry, a pedagogical approach called design thinking (DT) has students grapple with issues that require a creative redefinition and reimagining of solutions akin to professional skills of designers, who consider conflicting priorities and complex negotiations to arrive at a solution to an ill-defined…

  13. Interviewers' question rewording: not always a bad thing

    NARCIS (Netherlands)

    Haan, Marieke; Ongena, Yfke; Huiskes, Mike

    2013-01-01

    Although correct question reading is a fundamental assumption of standardized interviewing, in surveys, interviewers will not always read all questions exactly as worded. In this study the deviations in question reading by interviewers were analyzed. In addition, we studied if these deviations were

  14. Safeguarding the User - Developing a Multimodal Design for Surveying and Raising Internet Safety and Security Awareness

    DEFF Research Database (Denmark)

    Gjedde, Lisa; Sharp, Robin; Andersen, Preben

    2009-01-01

    Internet safety and security for the user is an issue of great importance for the successful implementation of ICT, but since it is a complex field, with a specialist vocabulary that cannot immediately be understood by the common user, it is difficult to survey the field. The user may not underst......Internet safety and security for the user is an issue of great importance for the successful implementation of ICT, but since it is a complex field, with a specialist vocabulary that cannot immediately be understood by the common user, it is difficult to survey the field. The user may...... describes an ICT-based research method that combines a verbal mode of inquiry with a visual mode employing illustrations, animations and simulations to provide the user with a multimodal media experience. The rationale for this is that we are working in a complex technical field with a specialist vocabulary...

  15. Site study plan for EDBH [Engineering Design Boreholes] seismic surveys, Deaf Smith County site, Texas: Revision 1

    International Nuclear Information System (INIS)

    Hume, H.

    1987-12-01

    This site study plan describes seismic reflection surveys to run north-south and east-west across the Deaf Smith County site, and intersecting near the Engineering Design Boreholes (EDBH). Both conventional and shallow high-resolution surveys will be run. The field program has been designed to acquire subsurface geologic and stratigraphic data to address information/data needs resulting from Federal and State regulations and Repository program requirements. The data acquired by the conventional surveys will be common-depth- point, seismic reflection data optimized for reflection events that indicate geologic structure near the repository horizon. The data will also resolve the basement structure and shallow reflection events up to about the top of the evaporite sequence. Field acquisition includes a testing phase to check/select parameters and a production phase. The field data will be subjected immediately to conventional data processing and interpretation to determine if there are any anamolous structural for stratigraphic conditions that could affect the choice of the EDBH sites. After the EDBH's have been drilled and logged, including vertical seismic profiling, the data will be reprocessed and reinterpreted for detailed structural and stratigraphic information to guide shaft development. The shallow high-resulition seismic reflection lines will be run along the same alignments, but the lines will be shorter and limited to immediate vicinity of the EDBH sites. These lines are planned to detect faults or thick channel sands that may be present at the EDBH sites. 23 refs. , 7 figs., 5 tabs

  16. The DESI Experiment Part I: Science,Targeting, and Survey Design

    Energy Technology Data Exchange (ETDEWEB)

    Aghamousa, Amir; et al.

    2016-10-31

    DESI (Dark Energy Spectroscopic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. To trace the underlying dark matter distribution, spectroscopic targets will be selected in four classes from imaging data. We will measure luminous red galaxies up to $z=1.0$. To probe the Universe out to even higher redshift, DESI will target bright [O II] emission line galaxies up to $z=1.7$. Quasars will be targeted both as direct tracers of the underlying dark matter distribution and, at higher redshifts ($ 2.1 < z < 3.5$), for the Ly-$\\alpha$ forest absorption features in their spectra, which will be used to trace the distribution of neutral hydrogen. When moonlight prevents efficient observations of the faint targets of the baseline survey, DESI will conduct a magnitude-limited Bright Galaxy Survey comprising approximately 10 million galaxies with a median $z\\approx 0.2$. In total, more than 30 million galaxy and quasar redshifts will be obtained to measure the BAO feature and determine the matter power spectrum, including redshift space distortions.

  17. A Survey of Applications and Research in Integrated Design Systems Technology

    Science.gov (United States)

    1998-01-01

    The initial part of the study was begun with a combination of literature searches, World Wide Web searches, and contacts with individuals and companies who were known to members of our team to have an interest in topics that seemed to be related to our study. There is a long list of such topics, such as concurrent engineering, design for manufacture, life-cycle engineering, systems engineering, systems integration, systems design, design systems, integrated product and process approaches, enterprise integration, integrated product realization, and similar terms. These all capture, at least in part, the flavor of what we describe here as integrated design systems. An inhibiting factor in this inquiry was the absence of agreed terminology for the study of integrated design systems. It is common for the term to be applied to what are essentially augmented Computer-Aided Design (CAD) systems, which are integrated only to the extent that agreements have been reached to attach proprietary extensions to proprietary CAD programs. It is also common for some to use the term integrated design systems to mean a system that applies only, or mainly, to the design phase of a product life cycle. It is likewise common for many of the terms listed earlier to be used as synonyms for integrated design systems. We tried to avoid this ambiguity by adopting the definition of integrated design systems that is implied in the introductory notes that we provided to our contacts, cited earlier. We thus arrived at this definition: Integrated Design Systems refers to the integration of the different tools and processes that comprise the engineering, of complex systems. It takes a broad view of the engineering of systems, to include consideration of the entire product realization process and the product life cycle. An important aspect of integrated design systems is the extent to which they integrate existing, "islands of automation" into a comprehensive design and product realization

  18. Quantum theory from questions

    Energy Technology Data Exchange (ETDEWEB)

    Hoehn, Philipp [Institute for Quantum Optics and Quantum Information, Austrian Academy of Sciences, Vienna (Austria); Wever, Christopher [Institute for Theoretical Particle Physics, Karlsruhe (Germany)

    2016-07-01

    In contrast to relativity, quantum theory has evaded a commonly accepted apprehension, in part because of the lack of physical statements that fully characterize it. In an attempt to remedy the situation, we summarize a novel reconstruction of the explicit formalism of quantum theory (for arbitrarily many qubits) from elementary rules on an observer's information acquisition. Our approach is purely operational: we consider an observer O interrogating a system S with binary questions and define S's state as O's ''catalogue of knowledge'' about S; no ontic assumptions are necessary. From the rules, one can derive, among other things, the state spaces, the unitary group, the von Neumann evolution and show that the binary questions correspond to Pauli operators. The reconstruction also offers new structural insights in the form of novel informational charges and informational complementarity relations which define the state spaces and the unitary group. This reconstruction permits a new perspective on quantum theory.

  19. Trick questions: cosmopolitan hospitality

    Directory of Open Access Journals (Sweden)

    Eleanor Byrne

    2013-08-01

    Full Text Available Byrne’s paper consists of two parallel texts. The first explores the limits of cosmopolitanism in practice, taking as its subject the Life in the UK Citizenship Test, inaugurated under the Labour Government in 2005. It argues that the test exemplifies the predicament of all attempts at cosmopolitan hospitality as unconditional welcoming, through a discussion of the relation between questioning and welcoming the stranger. Establishing the relationship between cosmopolitanism and hospitality as envisaged in Derrida’s reading of Kant it asks what kind of cosmopolitan hospitality is either possible or desirable by exploring what Derrida calls the ‘perversions’ inherent in the structures of hospitality. It focuses on the concept of the ‘trick questions’ that the state asks the foreigner observed by Derrida in his reading of The Apology of Socrates; questions that seem to invite answers but foreclose the possibilities of a free response. The second text asks how this logic that Derrida identifies can be pushed or coaxed into new ways of addressing the perceived threats of ‘unconditional’ hospitality through a reading of ‘unconditional hospitality’ as queer in the work of Tove Jansson.

  20. The APACHE survey hardware and software design: Tools for an automatic search of small-size transiting exoplanets

    Directory of Open Access Journals (Sweden)

    Lattanzi M.G.

    2013-04-01

    Full Text Available Small-size ground-based telescopes can effectively be used to look for transiting rocky planets around nearby low-mass M stars using the photometric transit method, as recently demonstrated for example by the MEarth project. Since 2008 at the Astronomical Observatory of the Autonomous Region of Aosta Valley (OAVdA, we have been preparing for the long-term photometric survey APACHE, aimed at finding transiting small-size planets around thousands of nearby early and mid-M dwarfs. APACHE (A PAthway toward the Characterization of Habitable Earths is designed to use an array of five dedicated and identical 40-cm Ritchey-Chretien telescopes and its observations started at the beginning of summer 2012. The main characteristics of the survey final set up and the preliminary results from the first weeks of observations will be discussed.

  1. Does the sequence of data collection influence participants' responses to closed and open-ended questions? A methodological study.

    Science.gov (United States)

    Covell, Christine L; Sidani, Souraya; Ritchie, Judith A

    2012-06-01

    The sequence used for collecting quantitative and qualitative data in concurrent mixed-methods research may influence participants' responses. Empirical evidence is needed to determine if the order of data collection in concurrent mixed methods research biases participants' responses to closed and open-ended questions. To examine the influence of the quantitative-qualitative sequence on responses to closed and open-ended questions when assessing the same variables or aspects of a phenomenon simultaneously within the same study phase. A descriptive cross-sectional, concurrent mixed-methods design was used to collect quantitative (survey) and qualitative (interview) data. The setting was a large multi-site health care centre in Canada. A convenience sample of 50 registered nurses was selected and participated in the study. Participants were randomly assigned to one of two sequences for data collection, quantitative-qualitative or qualitative-quantitative. Independent t-tests were performed to compare the two groups' responses to the survey items. Directed content analysis was used to compare the participants' responses to the interview questions. The sequence of data collection did not greatly affect the participants' responses to the closed-ended questions (survey items) or the open-ended questions (interview questions). The sequencing of data collection, when using both survey and semi-structured interviews, may not bias participants' responses to closed or open-ended questions. Additional research is required to confirm these findings. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Positive, negative, and bipolar questions: The effect of question polarity on ratings of text readability

    Directory of Open Access Journals (Sweden)

    Naomi Kamoen

    2013-12-01

    Full Text Available For decades, survey researchers have known that respondents give different answers to attitude questions worded positively (X is good. Agree-Disagree, negatively (X is bad. Agree-Disagree or on a bipolar scale (X is bad-good. This makes survey answers hard to interpret, especially since findings on exactly how the answers are affected are conflicting. In the current paper, we present twelve studies in which the effect of question polarity was measured for a set of thirteen contrastive adjectives. In each study, the same adjectives were used so the generalizability of wording effects across studies could be examined for each word pair. Results show that for five of the word pairs an effect of question wording can be generalized. The direction of these effects are largely consistent: respondents generally give the same answers to positive and bipolar questions, but they are more likely to disagree with negative questions than to agree with positive questions or to choose the positive side of the bipolar scale. In other words, respondents express their opinions more positively when the question is worded negatively. Even though answers to the three wording alternatives sometimes differ, results also show that reliable answers can be obtained with all three wording alternatives. So, for survey practice, these results suggest that all three wording alternatives may be used for attitude measurement.

  3. Survey on Recent Designs of Compliant Micro-/Nano-Positioning Stages

    Directory of Open Access Journals (Sweden)

    Zeyi Wu

    2018-02-01

    Full Text Available Micromanipulation is a hot topic due to its enabling role in various research fields. In order to perform a high precision operation at a small scale, compliant mechanisms have been proposed and applied for decades. In microscale manipulation, micro-/nano-positioning is the most fundamental operation because a precision positioning is the premise of subsequent operations. This paper is concentrated on reviewing the state-of-the-art research on complaint micro-/nano-positioning stage design in recent years. It involves the major processes and components for designing a compliant positioning stage, e.g., actuator selection, stroke amplifier design, connecting scheme of the multi-DOF stage and structure optimization. The review provides a reference to design a compliant micro-/nano-positioning stage for pertinent applications.

  4. An exploratory survey of design science research amongst South African computing scholars

    CSIR Research Space (South Africa)

    Naidoo, R

    2012-10-01

    Full Text Available The debate ensues as to whether the traditional focus of computing research on theory development and verification and therefore has adequate immediate practical relevance. Despite increasing claims of the potential of design science research (DSR...

  5. The pregnancy question: a survey regarding the establishment of whether females of childbearing age are or may be pregnant prior to radiation exposures in diagnostic radiology and nuclear medicine departments in the UK

    International Nuclear Information System (INIS)

    Lewis, C.; Arscott, T.

    2008-01-01

    Full text: In the UK, the Ionising Radiation (Medical Exposure) Regulations 2000 state that 'the written procedure for medical exposures shall include...procedures for making enquiries of females of childbearing age to establish whether the individual is or may be pregnant...'. Despite the importance of this question and the potential for causing great distress and anxiety if an examination involving ionising radiation is performed on a pregnant patient, the guidance available is vague and there is no universally accepted procedure on when and how to ask this difficult question. Anecdotal evidence suggests that the procedure for enquiring about possible pregnancy varies from department to department. To investigate this further, we devised a questionnaire to send out to diagnostic radiology and nuclear medicine departments across the UK. Questions asked related to the department's written procedure, the examinations for which the question would be asked, the age of women asked and the recording of whether the question was asked and the outcome. Responses were received from over 300 individuals from 66 different hospitals. The majority (73.5%) were from X-ray departments, 14.0% were from nuclear medicine and the remaining 12.5% included computed tomography, neuroradiology, angiography and cardiac catheter labs. 97.0% have a written procedure, 1.2% do not, 0.9% do not know and 0.9% gave no response. Of the responses from X-ray departments, 17% ask the question for all examinations, while 83% ask for examinations of specific body regions. Several body regions were stated and were divided into 9 categories with the main one being diaphragm to knees (45%). Nuclear medicine departments ask for all examinations. With regard to establishing the 'childbearing age', 5% state that for younger and older patients they ascertain whether the female has started/stopped menstruation before asking the pregnancy question (no age range given), and 95% state an age range of the females

  6. Performance of small cluster surveys and the clustered LQAS design to estimate local-level vaccination coverage in Mali.

    Science.gov (United States)

    Minetti, Andrea; Riera-Montes, Margarita; Nackers, Fabienne; Roederer, Thomas; Koudika, Marie Hortense; Sekkenes, Johanne; Taconet, Aurore; Fermon, Florence; Touré, Albouhary; Grais, Rebecca F; Checchi, Francesco

    2012-10-12

    Estimation of vaccination coverage at the local level is essential to identify communities that may require additional support. Cluster surveys can be used in resource-poor settings, when population figures are inaccurate. To be feasible, cluster samples need to be small, without losing robustness of results. The clustered LQAS (CLQAS) approach has been proposed as an alternative, as smaller sample sizes are required. We explored (i) the efficiency of cluster surveys of decreasing sample size through bootstrapping analysis and (ii) the performance of CLQAS under three alternative sampling plans to classify local VC, using data from a survey carried out in Mali after mass vaccination against meningococcal meningitis group A. VC estimates provided by a 10 × 15 cluster survey design were reasonably robust. We used them to classify health areas in three categories and guide mop-up activities: i) health areas not requiring supplemental activities; ii) health areas requiring additional vaccination; iii) health areas requiring further evaluation. As sample size decreased (from 10 × 15 to 10 × 3), standard error of VC and ICC estimates were increasingly unstable. Results of CLQAS simulations were not accurate for most health areas, with an overall risk of misclassification greater than 0.25 in one health area out of three. It was greater than 0.50 in one health area out of two under two of the three sampling plans. Small sample cluster surveys (10 × 15) are acceptably robust for classification of VC at local level. We do not recommend the CLQAS method as currently formulated for evaluating vaccination programmes.

  7. Performance of small cluster surveys and the clustered LQAS design to estimate local-level vaccination coverage in Mali

    Directory of Open Access Journals (Sweden)

    Minetti Andrea

    2012-10-01

    Full Text Available Abstract Background Estimation of vaccination coverage at the local level is essential to identify communities that may require additional support. Cluster surveys can be used in resource-poor settings, when population figures are inaccurate. To be feasible, cluster samples need to be small, without losing robustness of results. The clustered LQAS (CLQAS approach has been proposed as an alternative, as smaller sample sizes are required. Methods We explored (i the efficiency of cluster surveys of decreasing sample size through bootstrapping analysis and (ii the performance of CLQAS under three alternative sampling plans to classify local VC, using data from a survey carried out in Mali after mass vaccination against meningococcal meningitis group A. Results VC estimates provided by a 10 × 15 cluster survey design were reasonably robust. We used them to classify health areas in three categories and guide mop-up activities: i health areas not requiring supplemental activities; ii health areas requiring additional vaccination; iii health areas requiring further evaluation. As sample size decreased (from 10 × 15 to 10 × 3, standard error of VC and ICC estimates were increasingly unstable. Results of CLQAS simulations were not accurate for most health areas, with an overall risk of misclassification greater than 0.25 in one health area out of three. It was greater than 0.50 in one health area out of two under two of the three sampling plans. Conclusions Small sample cluster surveys (10 × 15 are acceptably robust for classification of VC at local level. We do not recommend the CLQAS method as currently formulated for evaluating vaccination programmes.

  8. Collaborative Chat Reference Service Effectiveness Varies by Question Type for Public Library Patrons. A review of: Kwon, Nahyun. ʺPublic Library Patronsʹ Use of Collaborative Chat Reference Service: The Effectiveness of Question Answering by Question Type.ʺ Library & Information Science Research 29.1 (Mar. 2007: 70‐91.

    Directory of Open Access Journals (Sweden)

    Stephanie Hall

    2008-03-01

    Full Text Available Objective – To assess the effectiveness of a collaborative chat reference service in answering different types of question. Specifically, the study compares the degree of answer completion and the level of user satisfaction for simple factual questions vs. more in‐depth subject‐based reference questions, and for ‘local’ (pertaining to a particular library and non‐local questions.Design – Content analysis of 415 transcripts of reference transactions, which were also compared to corresponding user satisfaction survey results.Setting – An online collaborative reference service offered by a large public library system (33 branch and regional locations. This service is part of the Metropolitan Cooperative Library System: a virtual reference consortium of U.S. libraries (public, academic, special, and corporate that provides 24/7 service.Subjects – Reference librarians from around the U.S. (49 different libraries, and users logging into the service via the public library system’s portal (primarily patrons of the 49 libraries. Method – Content analysis was used to evaluate virtual reference transcripts recorded between January and June, 2004. Reliability was enhanced through triangulation, with researchers comparing the content analysis of each transcript against the results of a voluntary exit survey. Of 1,387 transactions that occurred during the period of study, 420 users completed the survey and these formed the basis of the study, apart from 5 transactions that were omitted because the questions were incomprehensible. Questions were examined and assigned to five categories: “simple, factual questions; subject‐based research questions; resource access questions; circulation‐related questions; and local library information inquiries” (80‐81. Answers were classed as either “completely answered, partially answered or unanswered, referred, and problematic endings” (82. Lastly, user satisfaction was surveyed on three

  9. From Questions to Queries

    Directory of Open Access Journals (Sweden)

    M. Drlík

    2007-12-01

    Full Text Available The extension of (Internet databases forceseveryone to become more familiar with techniques of datastorage and retrieval because users’ success often dependson their ability to pose right questions and to be able tointerpret their answers. University programs pay moreattention to developing database programming skills than todata exploitation skills. To educate our students to become“database users”, the authors intensively exploit supportivetools simplifying the production of database elements astables, queries, forms, reports, web pages, and macros.Videosequences demonstrating “standard operations” forcompleting them have been prepared to enhance out-ofclassroomlearning. The use of SQL and other professionaltools is reduced to the cases when the wizards are unable togenerate the intended construct.

  10. The Coding Question.

    Science.gov (United States)

    Gallistel, C R

    2017-07-01

    Recent electrophysiological results imply that the duration of the stimulus onset asynchrony in eyeblink conditioning is encoded by a mechanism intrinsic to the cerebellar Purkinje cell. This raises the general question - how is quantitative information (durations, distances, rates, probabilities, amounts, etc.) transmitted by spike trains and encoded into engrams? The usual assumption is that information is transmitted by firing rates. However, rate codes are energetically inefficient and computationally awkward. A combinatorial code is more plausible. If the engram consists of altered synaptic conductances (the usual assumption), then we must ask how numbers may be written to synapses. It is much easier to formulate a coding hypothesis if the engram is realized by a cell-intrinsic molecular mechanism. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Biofuels - 5 disturbing questions

    International Nuclear Information System (INIS)

    Legalland, J.P.; Lemarchand, J.L.

    2008-01-01

    Initially considered as the supreme weapon against greenhouse gas emissions, biofuels are today hold responsible to all harms of the Earth: leap of agriculture products price, deforestation, food crisis. Considered some time ago as the perfect clean substitute to petroleum, biofuels are now suspected to have harmful effects on the environment. Should it be just an enormous technical, environmental and human swindle? Should we abandon immediately biofuels to protect the earth and fight the threatening again starvation? Should we wait for the second generation of efficient biofuels, made from non food-derived products and cultivation wastes? This book analyses this delicate debate through 5 main questions: do they starve the world? Are they a clean energy source? Do they contribute to deforestation? Are they economically practicable? Is the second generation ready? (J.S.)

  12. Questions and Questioning Techniques: A View of Indonesian Students’ Preferences

    Directory of Open Access Journals (Sweden)

    Debora Tri Ragawanti

    2009-01-01

    Full Text Available This study investigated students’ preference on teacher’s questions and questionings techniques and more importantly on how they could facilitate or impede their learning. The results on teacher’s questioning techniques showed that random nomination was more preferred than pre-arranged format nomination. In addition, techniques of nominating volunteering students and of giving wait-time were disliked by most student-respondents. As for types of question, the yes/no question was favored by most of the respondents. Different from the yes/no question, the number of respondents leaning forward to the analysis question, questions about fact of life, and questions to state opinion did not show a significant difference from the number of those leaning against the same questions.

  13. THE FMOS-COSMOS SURVEY OF STAR-FORMING GALAXIES AT z ∼ 1.6. III. SURVEY DESIGN, PERFORMANCE, AND SAMPLE CHARACTERISTICS

    Energy Technology Data Exchange (ETDEWEB)

    Silverman, J. D.; Sugiyama, N. [Kavli Institute for the Physics and Mathematics of the Universe (WPI), The University of Tokyo Institutes for Advanced Study, The University of Tokyo, Kashiwa, 277-8583 (Japan); Kashino, D. [Division of Particle and Astrophysical Science, Graduate School of Science, Nagoya University, Nagoya, 464-8602 (Japan); Sanders, D.; Zahid, J.; Kewley, L. J.; Chu, J.; Hasinger, G. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI, 96822 (United States); Kartaltepe, J. S. [National Optical Astronomy Observatory, 950 N. Cherry Ave., Tucson, AZ, 85719 (United States); Arimoto, N. [Subaru Telescope, 650 North A’ohoku Place, Hilo, Hawaii, 96720 (United States); Renzini, A. [Instituto Nazionale de Astrofisica, Osservatorio Astronomico di Padova, vicolo dell’Osservatorio 5, I-35122, Padova, Italy, EU (Italy); Rodighiero, G.; Baronchelli, I. [Dipartimento di Fisica e Astronomia, Universita di Padova, vicolo Osservatorio, 3, I-35122, Padova (Italy); Daddi, E.; Juneau, S. [Laboratoire AIM, CEA/DSM-CNRS-Universite Paris Diderot, Irfu/Service d’Astrophysique, CEA Saclay (France); Nagao, T. [Graduate School of Science and Engineering, Ehime University, 2-5 Bunkyo-cho, Matsuyama 790-8577 (Japan); Lilly, S. J.; Carollo, C. M. [Institute of Astronomy, ETH Zürich, CH-8093, Zürich (Switzerland); Capak, P. [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); Ilbert, O., E-mail: john.silverman@ipmu.jp [Aix Marseille Université, CNRS, LAM (Laboratoire d’Astrophysique de Marseille) UMR 7326, F-13388, Marseille (France); and others

    2015-09-15

    We present a spectroscopic survey of galaxies in the COSMOS field using the Fiber Multi-object Spectrograph (FMOS), a near-infrared instrument on the Subaru Telescope. Our survey is specifically designed to detect the Hα emission line that falls within the H-band (1.6–1.8 μm) spectroscopic window from star-forming galaxies with 1.4 < z < 1.7 and M{sub stellar} ≳ 10{sup 10} M{sub ⊙}. With the high multiplex capability of FMOS, it is now feasible to construct samples of over 1000 galaxies having spectroscopic redshifts at epochs that were previously challenging. The high-resolution mode (R ∼ 2600) effectively separates Hα and [N ii]λ6585, thus enabling studies of the gas-phase metallicity and photoionization state of the interstellar medium. The primary aim of our program is to establish how star formation depends on stellar mass and environment, both recognized as drivers of galaxy evolution at lower redshifts. In addition to the main galaxy sample, our target selection places priority on those detected in the far-infrared by Herschel/PACS to assess the level of obscured star formation and investigate, in detail, outliers from the star formation rate (SFR)—stellar mass relation. Galaxies with Hα detections are followed up with FMOS observations at shorter wavelengths using the J-long (1.11–1.35 μm) grating to detect Hβ and [O iii]λ5008 which provides an assessment of the extinction required to measure SFRs not hampered by dust, and an indication of embedded active galactic nuclei. With 460 redshifts measured from 1153 spectra, we assess the performance of the instrument with respect to achieving our goals, discuss inherent biases in the sample, and detail the emission-line properties. Our higher-level data products, including catalogs and spectra, are available to the community.

  14. Design, validation, and reliability of survey to measure female athlete triad knowledge among coaches

    Directory of Open Access Journals (Sweden)

    Jillian E. Frideres

    2015-06-01

    Full Text Available The purpose of this study was to design and to test the validity and reliability of an instrument to evaluate coaches' knowledge about the female athlete triad syndrome and their confidence in this knowledge. The instrument collects information regarding: knowledge of the syndrome, components, prevention and intervention; confidence of the coaches in their answers; and coach's characteristics (gender, degree held, years of experience in coaching females, continuing education participation specific to the syndrome and its components, and sport coached. The process of designing the questionnaire and testing the validity and reliability of it was done in four phases: a design and development of the instrument, b content validity, c instrument reliability, and d concurrent validity. The results show that the instrument is suitable for measuring coaches' female athlete triad knowledge. The instrument can contribute to assessing the coaches' knowledge level in relation to this topic.

  15. [Design and implementation of field questionnaire survey system of taeniasis/cysticercosis].

    Science.gov (United States)

    Huan-Zhang, Li; Jing-Bo, Xue; Men-Bao, Qian; Xin-Zhong, Zang; Shang, Xia; Qiang, Wang; Ying-Dan, Chen; Shi-Zhu, Li

    2018-04-17

    A taeniasis/cysticercosis information management system was designed to achieve the dynamic monitoring of the epidemic situation of taeniasis/cysticercosis and improve the intelligence level of disease information management. The system includes three layer structures (application layer, technical core layer, and data storage layer) and designs a datum transmission and remote communication system of traffic information tube in Browser/Server architecture. The system is believed to promote disease datum collection. Additionally, the system may provide the standardized data for convenience of datum analysis.

  16. Quality of life and discriminating power of two questionnaires in fibromyalgia patients: fibromyalgia Impact Questionnaire and Medical Outcomes Study 36-Item Short-Form Health Survey A qualidade de vida e o poder de discriminação de dois questionários em pacientes com fibromialgia: fibromyalgia Impact Questionnaire e Medical Outcomes Study 36-Item Short-Form Health Survey

    Directory of Open Access Journals (Sweden)

    Ana Assumpção

    2010-08-01

    Full Text Available BACKGROUND: Fibromyalgia is a painful syndrome characterized by widespread chronic pain and associated symptoms with a negative impact on quality of life. OBJECTIVES: Considering the subjectivity of quality of life measurements, the aim of this study was to verify the discriminating power of two quality of life questionnaires in patients with fibromyalgia: the generic Medical Outcomes Study 36-Item Short-Form Health Survey (SF-36 and the specific Fibromyalgia Impact Questionnaire (FIQ. METHODS: A cross-sectional study was conducted on 150 participants divided into Fibromyalgia Group (FG and Control Group (CG (n=75 in each group. The participants were evaluated using the SF-36 and the FIQ. The data were analyzed by the Student t-test (α=0.05 and inferential analysis using the Receiver Operating Characteristics (ROC Curve - sensitivity, specificity and area under the curve (AUC. The significance level was 0.05. RESULTS: The sample was similar for age (CG: 47.8±8.1; FG: 47.0±7.7 years. A significant difference was observed in quality of life assessment in all aspects of both questionnaires (pCONTEXTUALIZAÇÃO: A fibromialgia é uma síndrome dolorosa caracterizada por dor espalhada e crônica e sintomas associados com um impacto negativo na qualidade de vida. OBJETIVOS: Considerando a subjetividade da mensuração de qualidade de vida, o objetivo deste estudo foi avaliar o poder de discriminação de dois questionários que avaliam a qualidade de vida de pacientes com fibromialgia: o genérico Medical Short Form Healthy Survey (SF-36 e o específico Questionário do Impacto da Fibromialgia (QIF. MÉTODOS: Foi conduzido um estudo transversal com 150 indivíduos, divididos em dois grupos: grupo fibromialgia (FM e grupo controle (GC (n=75 em ambos. Os pacientes foram avaliados pelo SF-36 e pelo QIF. Na análise dos dados, utilizou-se o teste "t de Student" com α=0,05 e a Curva ROC (Receiver Operating Characteristics Curve. RESULTADOS: As amostras

  17. Survey of Programs Designed to Improve Employee Morale in Seven Major American Shipyards

    National Research Council Canada - National Science Library

    1992-01-01

    ... and therefore his productivity. This study is purposely limited to those employee morale improvement programs which were designed to improve productivity and which in the opinion of management did, in fact, cause an increase in productivity whether or not that increase in productivity is quantifiable.

  18. Optimization in the design and control of robotic manipulators: A survey

    International Nuclear Information System (INIS)

    Rao, S.S.; Bhatti, P.K.

    1989-01-01

    Robotics is a relatively new and evolving technology being applied to manufacturing automation and is fast replacing the special-purpose machines or hard automation as it is often called. Demands for higher productivity, better and uniform quality products, and better working environments are primary reasons for its development. An industrial robot is a multifunctional and computer-controlled mechanical manipulator exhibiting a complex and highly nonlinear behavior. Even though most current robots have anthropomorphic configurations, they have far inferior manipulating abilities compared to humans. A great deal of research effort is presently being directed toward improving their overall performance by using optimal mechanical structures and control strategies. The optimal design of robot manipulators can include kinematic performance characteristics such as workspace, accuracy, repeatability, and redundancy. The static load capacity as well as dynamic criteria such as generalized inertia ellipsoid, dynamic manipulability, and vibratory response have also been considered in the design stages. The optimal control problems typically involve trajectory planning, time-optimal control, energy-optimal control, and mixed-optimal control. The constraints in a robot manipulator design problem usually involve link stresses, actuator torques, elastic deformation of links, and collision avoidance. This paper presents a review of the literature on the issues of optimum design and control of robotic manipulators and also the various optimization techniques currently available for application to robotics

  19. A Survey of Career Guidance Needs of Industrial Design Students in Taiwanese Universities

    Science.gov (United States)

    Yang, Ming-Ying; You, Manlai

    2010-01-01

    School pupils in Taiwan spend most of their time in studying and having examinations, and consequently many of them decide what major to study in universities rather hastily. Industrial design (ID) programs in universities nowadays recruit students from general and vocational senior high schools through a variety of channels. As a consequence, ID…

  20. Diagrams: A Visual Survey of Graphs, Maps, Charts and Diagrams for the Graphic Designer.

    Science.gov (United States)

    Lockwood, Arthur

    Since the ultimate success of any diagram rests in its clarity, it is important that the designer select a method of presentation which will achieve this aim. He should be aware of the various ways in which statistics can be shown diagrammatically, how information can be incorporated in maps, and how events can be plotted in chart or graph form.…

  1. A Survey of Educational Games as Interaction Design Tools for Affective Learning: Thematic Analysis Taxonomy

    Science.gov (United States)

    Yusoff, Zarwina; Kamsin, Amirrudin; Shamshirband, Shahaboddin; Chronopoulos, Anthony T.

    2018-01-01

    A Computer game is the new platform in generating learning experiences for educational purposes. There are many educational games that have been used as an interaction design tool in a learning environment to enhance students learning outcomes. However, research also claims that playing video games can have a negative impact on student behavior,…

  2. Computer Game Theories for Designing Motivating Educational Software: A Survey Study

    Science.gov (United States)

    Ang, Chee Siang; Rao, G. S. V. Radha Krishna

    2008-01-01

    The purpose of this study is to evaluate computer game theories for educational software. We propose a framework for designing engaging educational games based on contemporary game studies which includes ludology and narratology. Ludology focuses on the study of computer games as play and game activities, while narratology revolves around the…

  3. Surveying the Landscape of Professional Development Research: Suggestions for New Perspectives in Design and Research

    Science.gov (United States)

    Manduca, Cathryn A.

    2017-01-01

    Science, technology, engineering, and mathematics (STEM) higher education is in need of improved teaching methods to increase learning for all students. Faculty professional development programs are a widespread strategy for fostering this improvement. Studies of faculty development programs have focused on program design and the impact of…

  4. Literature Survey on Interaction Design and Existing Software Applications for Dyslectic Users

    DEFF Research Database (Denmark)

    Vangeli, Panagiota; Stage, Jan

    2017-01-01

    their reading skills. For the purpose of this research, we initially collected 175 studies, from which we selected, reviewed and made an overview table of 71 studies organized by areas of attention. The literature research on interaction design of systems for dyslectic users resulted in a presentation...

  5. Design and use of concrete pads for the calibration of radiometric survey instrumentation

    International Nuclear Information System (INIS)

    Loevborg, L.

    1984-10-01

    A gamma-ray spectrometer for use in geological exploration possesses four stripping ratios and three window sensitivities which must be determined to make the instrumentation applicable for field assay or airborne measurement of potassium, uranium, and thorium contents in the ground. Survey organizations in many parts of the world perform the instrument calibration using large pads of concrete which simulate a plane ground of known radioelement concentration. Calibration and monitoring trials with twelve facilities in ten countries prove that moisture absorption, radon exhalation, and particle-size effects can offset a radiometric grade assigned to concrete whose aggregate contains an embedded radioactive mineral. These and other calibration problems are discussed from a combined theoretical and practical viewpoint

  6. Une question interdite

    Directory of Open Access Journals (Sweden)

    Pierre Legendre

    2003-01-01

    Full Text Available Is legal history a left-over or is it waiting for a takeover bid (just like a company in serious trouble which would allow the expression of new analyses and outlines for a better understanding of the contemporary western world? Its propositions of erudition, are they just interesting for small academic circles, or could they open a new pathway for fundamental reflections on the phenomenon of norms in general and the structure of its evolution in the special case of norm-production coming from Roman Christianity? And what is the significance of the idea of »legal tradition«, an idea forged in Western Europe, within the framework of a presumed global westernization without any counter-balance? The essay discusses the illegibility of legal history in today’s culture. Under the well reflected motto »The Forbidden Question« it concludes firmly: To renovate itself, this discipline has to perform its work in a new way, guided by a very precise and distinct vision on theory. The author examines the conditions for this.

  7. Nanodesign: some basic questions

    CERN Document Server

    Schommers, Wolfram

    2013-01-01

    There is no doubt that nanoscience will be the dominant direction for technology in this century, and that this science will influence our lives to a large extent as well as open completely new perspectives on all scientific and technological disciplines. To be able to produce optimal nanosystems with tailor-made properties, it is necessary to analyze and construct such systems in advance by adequate theoretical and computational methods. Since we work in nanoscience and nanotechnology at the ultimate level, we have to apply the basic laws of physics. What methods and tools are relevant here? The book gives an answer to this question. The background of the theoretical methods and tools is critically discussed, and also the world view on which these physical laws are based. Such a debate is not only of academic interest but is of highly general concern, and this is because we constantly move in nanoscience and nanotechnology between two extreme poles, between infinite life and total destruction . On the one ...

  8. 101 questions about energy

    International Nuclear Information System (INIS)

    Furfari, S.

    2009-01-01

    Today, energy in the center of the world events. People get swamped with information about energy, environment, energy saving or renewable energy sources. However, the solutions proposed are still in the centre of debates and no consensus exists which allows to define a clear policy: nuclear energy or wind power? Solar energy or biomass fuels? And what about the meaning of the expression 'clean coal'? And why oil prices go up and down while it is said that the resource is close to exhaustion? Mass media are trying to tell us that 'urgency is here', mainly because of the climatic threat of greenhouse gases and because of a world economy totally dependent of politically unstable areas, like Middle East, Africa or Caucasus, but with huge oil and gas resources. And what about Europe, and what about all this gas in Russia? It is hard for a non-specialist to find his way in this complex domain. This is the aim of this book which has opted for the non-politically correct attitude to answer 101 key-questions about the energy topic: Europe's security of supply, energy geopolitics, oil future, energy crises, sustainable development etc. (J.S.)

  9. Methodological issues in the design of online surveys for measuring unethical work behavior: Recommendations on the basis of a split-ballot experiment

    NARCIS (Netherlands)

    Wouters, K.; Maesschalck, J.B.; Peeters, C.F.W.; Rosen, M.

    2014-01-01

    In recent years, there has been an increasing interest in unethical work behavior. Several types of survey instruments to collect information about unethical work behavior are available. Nevertheless, to date little attention has been paid to design issues of those surveys. There are, however,

  10. Increasing the quantity and quality of searching for current best evidence to answer clinical questions: protocol and intervention design of the MacPLUS FS Factorial Randomized Controlled Trials.

    Science.gov (United States)

    Agoritsas, Thomas; Iserman, Emma; Hobson, Nicholas; Cohen, Natasha; Cohen, Adam; Roshanov, Pavel S; Perez, Miguel; Cotoi, Chris; Parrish, Rick; Pullenayegum, Eleanor; Wilczynski, Nancy L; Iorio, Alfonso; Haynes, R Brian

    2014-09-20

    Finding current best evidence for clinical decisions remains challenging. With 3,000 new studies published every day, no single evidence-based resource provides all answers or is sufficiently updated. McMaster Premium LiteratUre Service--Federated Search (MacPLUS FS) addresses this issue by looking in multiple high quality resources simultaneously and displaying results in a one-page pyramid with the most clinically useful at the top. Yet, additional logistical and educational barriers need to be addressed to enhance point-of-care evidence retrieval. This trial seeks to test three innovative interventions, among clinicians registered to MacPLUS FS, to increase the quantity and quality of searching for current best evidence to answer clinical questions. In a user-centered approach, we designed three interventions embedded in MacPLUS FS: (A) a web-based Clinical Question Recorder; (B) an Evidence Retrieval Coach composed of eight short educational videos; (C) an Audit, Feedback and Gamification approach to evidence retrieval, based on the allocation of 'badges' and 'reputation scores.' We will conduct a randomized factorial controlled trial among all the 904 eligible medical doctors currently registered to MacPLUS FS at the hospitals affiliated with McMaster University, Canada. Postgraduate trainees (n=429) and clinical faculty/staff (n=475) will be randomized to each of the three following interventions in a factorial design (AxBxC). Utilization will be continuously recorded through clinicians’ accounts that track logins and usage, down to the level of individual keystrokes. The primary outcome is the rate of searches per month per user during the six months of follow-up. Secondary outcomes, measured through the validated Impact Assessment Method questionnaire, include: utility of answers found (meeting clinicians’ information needs), use (application in practice), and perceived usefulness on patient outcomes. Built on effective models for the point

  11. Mixed-Mode and Mixed-Device Surveys

    NARCIS (Netherlands)

    de Leeuw, E.D.; Toepoel, V.

    2018-01-01

    Online surveys are one of the most prominent data collection methods in Europe and the USA. Not only are they fast and cheap, data quality in well-designed online surveys is high, especially when sensitive questions are asked. Disadvantages are the threat of undercoverage, as not everyone has

  12. SABE Colombia: Survey on Health, Well-Being, and Aging in Colombia—Study Design and Protocol

    Science.gov (United States)

    Corchuelo, Jairo; Curcio, Carmen-Lucia; Calzada, Maria-Teresa; Mendez, Fabian

    2016-01-01

    Objective. To describe the design of the SABE Colombia study. The major health study of the old people in Latin America and the Caribbean (LAC) is the Survey on Health, Well-Being, and Aging in LAC, SABE (from initials in Spanish: SAlud, Bienestar & Envejecimiento). Methods. The SABE Colombia is a population-based cross-sectional study on health, aging, and well-being of elderly individuals aged at least 60 years focusing attention on social determinants of health inequities. Methods and design were similar to original LAC SABE. The total sample size of the study at the urban and rural research sites (244 municipalities) was 23.694 elderly Colombians representative of the total population. The study had three components: (1) a questionnaire covering active aging determinants including anthropometry, blood pressure measurement, physical function, and biochemical and hematological measures; (2) a subsample survey among family caregivers; (3) a qualitative study with gender and cultural perspectives of quality of life to understand different dimensions of people meanings. Conclusions. The SABE Colombia is a comprehensive, multidisciplinary study of the elderly with respect to active aging determinants. The results of this study are intended to inform public policies aimed at tackling health inequalities for the aging society in Colombia. PMID:27956896

  13. Advanced power generation systems for the 21st Century: Market survey and recommendations for a design philosophy

    Energy Technology Data Exchange (ETDEWEB)

    Andriulli, J.B.; Gates, A.E.; Haynes, H.D.; Klett, L.B.; Matthews, S.N.; Nawrocki, E.A.; Otaduy, P.J.; Scudiere, M.B.; Theiss, T.J.; Thomas, J.F.; Tolbert, L.M.; Yauss, M.L.; Voltz, C.A.

    1999-11-01

    The purpose of this report is to document the results of a study designed to enhance the performance of future military generator sets (gen-sets) in the medium power range. The study includes a market survey of the state of the art in several key component areas and recommendations comprising a design philosophy for future military gen-sets. The market survey revealed that the commercial market is in a state of flux, but it is currently or will soon be capable of providing the technologies recommended here in a cost-effective manner. The recommendations, if implemented, should result in future power generation systems that are much more functional than today's gen-sets. The number of differing units necessary (both family sizes and frequency modes) to cover the medium power range would be decreased significantly, while the weight and volume of each unit would decrease, improving the transportability of the power source. Improved fuel economy and overall performance would result from more effective utilization of the prime mover in the generator. The units would allow for more flexibility and control, improved reliability, and more effective power management in the field.

  14. Design and operation of the National Survey of Children with Special Health Care Needs, 2009-2010.

    Science.gov (United States)

    Bramlett, Matthew D; Blumberg, Stephen J; Ormson, A Elizabeth; George, Jacquelyn M; Williams, Kim L; Frasier, Alicia M; Skalland, Benjamin J; Santos, Kathleen B; Vsetecka, Danielle M; Morrison, Heather M; Pedlow, Steven; Wang, Fang

    2014-11-01

    This report presents the development, plan, and operation of the 2009-2010 National Survey of Children with Special Health Care Needs, a module of the State and Local Area Integrated Telephone Survey. The survey is conducted by the Centers for Disease Control and Prevention's National Center for Health Statistics. This survey was designed to produce national and state-specific prevalence estimates of children with special health care needs (CSHCN), to describe the types of services that they need and use, and to assess aspects of the system of care for CSHCN. A random-digit-dial sample of households with children under age 18 years was constructed for each of the 50 states and the District of Columbia. The sampling frame consisted of landline phone numbers and cellular(cell) phone numbers of households that reported a cell-phone-only or cell-phone-mainly status. Children in identified households were screened for special health care needs. If CSHCN were identified in the household, a detailed interview was conducted for one randomly selected child with special health care needs. Respondents were parents or guardians who knew about the children's health and health care. A total of 196,159 household screening interviews were completed from July 2009 through March 2011, resulting in 40,242 completed special-needs interviews, including 2,991 from cell-phone interviews. The weighted overall response rate was 43.7% for the landline sample, 15.2% for the cell-phone sample, and 25.5% overall. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source, however, is appreciated.

  15. A survey on the design of multiprocessing systems for artificial intelligence applications

    Science.gov (United States)

    Wah, Benjamin W.; Li, Guo Jie

    1989-01-01

    Some issues in designing computers for artificial intelligence (AI) processing are discussed. These issues are divided into three levels: the representation level, the control level, and the processor level. The representation level deals with the knowledge and methods used to solve the problem and the means to represent it. The control level is concerned with the detection of dependencies and parallelism in the algorithmic and program representations of the problem, and with the synchronization and sheduling of concurrent tasks. The processor level addresses the hardware and architectural components needed to evaluate the algorithmic and program representations. Solutions for the problems of each level are illustrated by a number of representative systems. Design decisions in existing projects on AI computers are classed into top-down, bottom-up, and middle-out approaches.

  16. Design and Calibration of a Flowfield Survey Rake for Inlet Flight Research

    Science.gov (United States)

    Flynn, Darin C.; Ratnayake, Nalin A.; Frederick, Michael

    2009-01-01

    Flowfield rake was designed to quantify the flowfield for inlet research underneath NASA DFRC s F-15B airplane. Detailed loads and stress analysis performed using CFD and empirical methods to assure structural integrity. Calibration data were generated through wind tunnel testing of the rake. Calibration algorithm was developed to determine the local Mach and flow angularity at each probe. RAGE was flown November, 2008. Data is currently being analyzed.

  17. Enhancing sampling design in mist-net bat surveys by accounting for sample size optimization

    OpenAIRE

    Trevelin, Leonardo Carreira; Novaes, Roberto Leonan Morim; Colas-Rosas, Paul François; Benathar, Thayse Cristhina Melo; Peres, Carlos A.

    2017-01-01

    The advantages of mist-netting, the main technique used in Neotropical bat community studies to date, include logistical implementation, standardization and sampling representativeness. Nonetheless, study designs still have to deal with issues of detectability related to how different species behave and use the environment. Yet there is considerable sampling heterogeneity across available studies in the literature. Here, we approach the problem of sample size optimization. We evaluated the co...

  18. Market Designs : A Survey and Analysis of Methods to Ensure Peak Capacity

    OpenAIRE

    Gullberg, Erik

    2008-01-01

    The production and consumption of electricity must be in balance in order to maintain the frequency in an electrical grid. During peak loads this may be troublesome to achieve due to lack of adequate production capabilities. Competitive electricity markets with price caps have a problem - insufficient revenues for peak production units which lead to mothballing or decommissioning of power plants. Inadequate production capability is solved through design of the electricity markets which render...

  19. Sociodemographic differences in dietary habits described by food frequency questions - results from Denmark

    DEFF Research Database (Denmark)

    Dynesen, Anja Weirsøe; Haraldsdóttir, J.; Holm, Karen Lotte

    2003-01-01

    OBJECTIVES: To investigate whether a modest number of food frequency questions are sufficient to describe sociodemographic differences in dietary habits, and to identify sociodemographic characteristics of subjects adhering to food-based dietary guidelines operationalised in a "healthy-diet index......". DESIGN: Cross-sectional population survey. SUBJECTS: A total of 480 men, 515 women, aged 15-90 y. Random sample of private telephone numbers drawn from regional telephone records, geographically stratified. Participation rate 62%. METHODS: Computer-assisted telephone interviews, including six food...... frequency questions, a question on type of fat spreads used on bread, questions on seven sociodemographic variables. RESULTS: The summary of the healthy-diet index showed that the subjects who adhered to food-based dietary guidelines (top quintile) compared to those who did not (bottom quintile) were most...

  20. Research design and statistical methods in Indian medical journals: a retrospective survey.

    Science.gov (United States)

    Hassan, Shabbeer; Yellur, Rajashree; Subramani, Pooventhan; Adiga, Poornima; Gokhale, Manoj; Iyer, Manasa S; Mayya, Shreemathi S

    2015-01-01

    Good quality medical research generally requires not only an expertise in the chosen medical field of interest but also a sound knowledge of statistical methodology. The number of medical research articles which have been published in Indian medical journals has increased quite substantially in the past decade. The aim of this study was to collate all evidence on study design quality and statistical analyses used in selected leading Indian medical journals. Ten (10) leading Indian medical journals were selected based on impact factors and all original research articles published in 2003 (N = 588) and 2013 (N = 774) were categorized and reviewed. A validated checklist on study design, statistical analyses, results presentation, and interpretation was used for review and evaluation of the articles. Main outcomes considered in the present study were - study design types and their frequencies, error/defects proportion in study design, statistical analyses, and implementation of CONSORT checklist in RCT (randomized clinical trials). From 2003 to 2013: The proportion of erroneous statistical analyses did not decrease (χ2=0.592, Φ=0.027, p=0.4418), 25% (80/320) in 2003 compared to 22.6% (111/490) in 2013. Compared with 2003, significant improvement was seen in 2013; the proportion of papers using statistical tests increased significantly (χ2=26.96, Φ=0.16, pdesign decreased significantly (χ2=16.783, Φ=0.12 pdesigns has remained very low (7.3%, 43/588) with majority showing some errors (41 papers, 95.3%). Majority of the published studies were retrospective in nature both in 2003 [79.1% (465/588)] and in 2013 [78.2% (605/774)]. Major decreases in error proportions were observed in both results presentation (χ2=24.477, Φ=0.17, presearch seems to have made no major progress regarding using correct statistical analyses, but error/defects in study designs have decreased significantly. Randomized clinical trials are quite rarely published and have high proportion of

  1. Questioning Questions: Elementary Teachers' Adaptations of Investigation Questions across the Inquiry Continuum

    Science.gov (United States)

    Biggers, Mandy

    2018-01-01

    Questioning is a central practice in science classrooms. However, not every question translates into a "good" science investigation. Questions that drive science investigations can be provided by many sources including the teacher, the curriculum, or the student. The variations in the source of investigation questions were explored in…

  2. Self-stigma by people diagnosed with schizophrenia, depression and anxiety: Cross-sectional survey design.

    Science.gov (United States)

    Hasan, Abd Al-Hadi; Musleh, Mahmoud

    2018-04-01

    This study investigated self-attitudes towards schizophrenia, depression and anxiety. A survey was conducted with 564 people with a schizophrenia, depression and anxiety who are currently being treated at a psychiatric clinic in Amman, Jordan. The research found that stigma towards schizophrenia, depression and anxiety was based around three factors: preconceived stereotypes, personal responsibility/blame and the perceived inability of a patient to recover. Schizophrenia, in particular, was linked more strongly to negative stereotypes and an inability to recover and less associated to personal responsibility/blame in comparison to depression and anxiety. Three identical stigma factors emerged for each diagnosis which reflected themes identified in previous literature. People with schizophrenia are seen as more dangerous and less likely to recover than those suffering from other mental illness. Anxiety was seen most favourably by the self; it was associated with less negative stereotypes and seen as more likely to cure. Interestingly, anxiety and depression were seen almost identically. The self-perception of mental health conditions, such as schizophrenia, depression and anxiety, have important implications for the planning of anti-stigma and awareness raising programmes. By gaining a thorough understanding of these perceptions and the rationale behind them, it may be possible to develop effective, tailor-made interventions. © 2017 Wiley Periodicals, Inc.

  3. [Sampling and measurement methods of the protocol design of the China Nine-Province Survey for blindness, visual impairment and cataract surgery].

    Science.gov (United States)

    Zhao, Jia-liang; Wang, Yu; Gao, Xue-cheng; Ellwein, Leon B; Liu, Hu

    2011-09-01

    To design the protocol of the China nine-province survey for blindness, visual impairment and cataract surgery to evaluate the prevalence and main causes of blindness and visual impairment, and the prevalence and outcomes of the cataract surgery. The protocol design was began after accepting the task for the national survey for blindness, visual impairment and cataract surgery from the Department of Medicine, Ministry of Health, China, in November, 2005. The protocol in Beijing Shunyi Eye Study in 1996 and Guangdong Doumen County Eye Study in 1997, both supported by World Health Organization, was taken as the basis for the protocol design. The relative experts were invited to discuss and prove the draft protocol. An international advisor committee was established to examine and approve the draft protocol. Finally, the survey protocol was checked and approved by the Department of Medicine, Ministry of Health, China and Prevention Program of Blindness and Deafness, WHO. The survey protocol was designed according to the characteristics and the scale of the survey. The contents of the protocol included determination of target population and survey sites, calculation of the sample size, design of the random sampling, composition and organization of the survey teams, determination of the examinee, the flowchart of the field work, survey items and methods, diagnostic criteria of blindness and moderate and sever visual impairment, the measures of the quality control, the methods of the data management. The designed protocol became the standard and practical protocol for the survey to evaluate the prevalence and main causes of blindness and visual impairment, and the prevalence and outcomes of the cataract surgery.

  4. A Survey of Utopia—Creating Filmic Travelogues in Architectural Design Studio Education †

    OpenAIRE

    Johannes Müntinga; Gerlinde Verhaeghe

    2018-01-01

    This paper investigates the potential of the creation of filmic travelogues in architectural design studio education. It looks at student works from a studio conducted at RWTH Aachen University in the summer term of 2017 and explores how the works construct meaning from and reflect on architectural reference in an active creative process. The assignment of the studio was to create a travelogue of a 4-day excursion to Belgium and the South of England in the form of a short film. Inspired by Pa...

  5. State of art survey for design of medium frequency high power transformer

    DEFF Research Database (Denmark)

    Vaisambhayana, Sriram; Dincan, Catalin; Shuyu, Cao

    2016-01-01

    Medium and high frequency, high power transformers play an important role in footprint reduction along with their functions of galvanic isolation, and voltage transformation in all high power converters typically used in traction power systems, offshore wind plant power converters, and solid state...... transformer based distribution system grids. This state of art report analysis the various materials and design tradeoffs that govern the electromagnetic behavior and loss mechanisms of the medium frequency transformer applications. Typical winding and core geometries that have been reported extensively...

  6. Petroleum question. Die Oelfrage

    Energy Technology Data Exchange (ETDEWEB)

    Mommer, B

    1983-01-01

    The author analyses the development of the world petroleum market and its pricing factors to the present on the basis of the theory of ground rent, in which the part played by absolute ground rent, differential rent, and free and national state property in the capitalist mode of production is determined. His investigation of economic policy traces the absorbing history of the petroleum production and policy of the United States of America, which for so long governed the world market, the development of Venezuela into a petroleum country (whose true history is here revealed for the first time), the penetration of the middle East by the international petroleum leaseholders' capital and their cartel, the formation of the OPEC, and finally the 'victory' of the lather over the petroleum combines in the international petroleum crisis of 1970-1973. The book closes with a survey at the start of the 80s and an outlook into the foreseeable future. What is really hidden behind the quarrels about prices, profit, taxes, royalties, franchise agreements, production quotas, nationalization and so forth and behind the economic, political, and even moral arguments of the parties concerned turns out to be the fight of the petroleum ground proprietors for the ground rent - but to win a victory in this fight means ultimately to face its limitations, too. Blindness to the economic and political importance of ground rent, right from the theoretical approach, also created a major cause of the false diagnoses and forecasts on the petroleum market western economic scientists were misled into, and thus of the surprise effect that came in the form of the petroleum crisis of the early 1970s.

  7. Question popularity analysis and prediction in community question answering services.

    Science.gov (United States)

    Liu, Ting; Zhang, Wei-Nan; Cao, Liujuan; Zhang, Yu

    2014-01-01

    With the blooming of online social media applications, Community Question Answering (CQA) services have become one of the most important online resources for information and knowledge seekers. A large number of high quality question and answer pairs have been accumulated, which allow users to not only share their knowledge with others, but also interact with each other. Accordingly, volumes of efforts have been taken to explore the questions and answers retrieval in CQA services so as to help users to finding the similar questions or the right answers. However, to our knowledge, less attention has been paid so far to question popularity in CQA. Question popularity can reflect the attention and interest of users. Hence, predicting question popularity can better capture the users' interest so as to improve the users' experience. Meanwhile, it can also promote the development of the community. In this paper, we investigate the problem of predicting question popularity in CQA. We first explore the factors that have impact on question popularity by employing statistical analysis. We then propose a supervised machine learning approach to model these factors for question popularity prediction. The experimental results show that our proposed approach can effectively distinguish the popular questions from unpopular ones in the Yahoo! Answers question and answer repository.

  8. Socratic Questioning-Guided Discovery

    Directory of Open Access Journals (Sweden)

    M. Hakan Türkçapar

    2012-04-01

    Full Text Available “Socratic Method” is a way of teaching philosophical thinking and knowledge by asking questions which was used by antique period greek philosopher Socrates. Socrates was teaching knowledge to his followers by asking questions and the conversation between them was named “Socratic Dialogues”. In this meaning, no novel knowledge is taught to the individual but only what is formerly known is reminded and rediscovered. The form of socratic questioning which is used during the process of cognitive behavioral therapy is known as Guided Discovery. In this method it is aimed to make the client notice the piece of knowledge which he could notice but is not aware with a series of questions. Socratic method or guided discovery consists of several steps which are: Identifying the problem by listening to the client and making reflections, finding alternatives by examining and evaluating, reidentification by using the newly found information and questioning the old distorted belief and reaching to a conclusion and applying it. Question types used during these procedures are, questions for gaining information, questions revealing the meanings, questions revealing the beliefs, questions about behaviours during the similar past experiences, analyse questions and analytic synthesis questions. In order to make the patient feel understood it is important to be empathetic and summarising the problem during the interview. In this text, steps of Socratic Questioning-Guided Discovery will be reviewed with sample dialogues after eachstep. [JCBPR 2012; 1(1.000: 15-20

  9. Semi-customizing patient surveys

    DEFF Research Database (Denmark)

    Riiskjær, Erik; Ammentorp, Jette; Nielsen, Jørn Flohr

    2011-01-01

    Objective. The study investigated the needs and consequences of semi-customizing patient satisfaction surveys to low organizational levels and explored whether patient satisfaction was correlated with local organizational conditions. Design. From 1999 to 2006, the County of Aarhus carried out 398....... Establishing a link between patient satisfaction and organizational variables broadens the quality development focus to include more than simply analysis of specific questions. Semi-customizing patient surveys are recommended....... surveys during four rounds in eight hospitals. To explain differences between the wards, data on the 40 wards with the best and the 40 wards with the worst evaluations (identified by patient surveys) were compared with the data from job satisfaction surveys and management information systems. Setting...

  10. A survey of Wien bridge-based chaotic oscillators: Design and experimental issues

    Energy Technology Data Exchange (ETDEWEB)

    Kilic, Recai [Erciyes University, Department of Electrical and Electronic Engineering, 38039 Kayseri (Turkey)], E-mail: kilic@erciyes.edu.tr; Yildirim, Fatma [Erciyes University, Civil Aviation School, 38039 Kayseri (Turkey)

    2008-12-15

    This paper presents a comparative study on design and implementation of Wien type chaotic oscillators. By making a collection of almost all Wien bridge-based chaotic circuits, we have investigated these oscillators in terms of chaotic dynamics, circuit structures, active building blocks, nonlinear element structures and operating frequency by using PSpice simulations and laboratory experiments. In addition to this comparative investigation, we present our two basic experimental contributions to referred implementations. While the first of our experimental contributions consists of the experimentally implementation of CFOA-based Chua's circuit modified for very high chaotic oscillations, the scope of the second is to experimentally implement a Wien type high frequency chaos generator, which has the diode-inductor composite, in the inductorless form by using CFOA-based synthetic inductor.

  11. A survey of Wien bridge-based chaotic oscillators: Design and experimental issues

    International Nuclear Information System (INIS)

    Kilic, Recai; Yildirim, Fatma

    2008-01-01

    This paper presents a comparative study on design and implementation of Wien type chaotic oscillators. By making a collection of almost all Wien bridge-based chaotic circuits, we have investigated these oscillators in terms of chaotic dynamics, circuit structures, active building blocks, nonlinear element structures and operating frequency by using PSpice simulations and laboratory experiments. In addition to this comparative investigation, we present our two basic experimental contributions to referred implementations. While the first of our experimental contributions consists of the experimentally implementation of CFOA-based Chua's circuit modified for very high chaotic oscillations, the scope of the second is to experimentally implement a Wien type high frequency chaos generator, which has the diode-inductor composite, in the inductorless form by using CFOA-based synthetic inductor

  12. Generic Drugs: Questions and Answers

    Science.gov (United States)

    ... Vaccines, Blood & Biologics Animal & Veterinary Cosmetics Tobacco Products Drugs Home Drugs Resources for You Information for Consumers (Drugs) Questions & Answers Generic Drugs: Questions & Answers Share Tweet Linkedin Pin it More ...

  13. Teacher's Questions in Reading Classes

    Directory of Open Access Journals (Sweden)

    Zuliati Rohmah

    2002-01-01

    Full Text Available Abstract: The present paper discusses an English teacher's questions in Reading classes at MAN Malang III. Types of questions, functions of teacher's questions, question levels and the strategies applied by the teacher were put as the research problems. Non-participant observa­tion was applied to collect the data with the researcher as the main in­strument aided by field-notes and a tape recorder. It was found that the distribution of the questions did not allow the students to talk longer and to think more analytically. Meanwhile, the strategies applied by the teacher helped the students to respond to the questions previously unanswered. The teacher is suggested to produce more open and refer­ential question as well as inference and evaluation questions as to give more chances for the students to think aloud more.

  14. Knee complaints and consequences on work status; a 10-year follow-up survey among floor layers and graphic designers.

    Science.gov (United States)

    Rytter, Søren; Jensen, Lilli Kirkeskov; Bonde, Jens Peter

    2007-09-18

    The purpose of the study was to examine if knee complaints among floor layers predict exclusion from the trade. In 1994/95 self-reported data were obtained from a cohort of floor layers and graphic designers with and without knee straining work activities, respectively. At follow-up in 2005 the questionnaire survey was repeated. The study population consisted of 81 floor layers and 173 graphic designers who were presently working in their trades at baseline (1995). All participants were men aged 36-70 years in 2005. We computed the risk of losing gainful employment in the trade according to occurrence of knee complaints at baseline, using Cox proportional hazard regression adjusted for a number of potential confounding variables. Moreover, the crude and adjusted odds risk ratio for knee complaints according to status of employment in the trade were computed, using graphic designers as reference. A positive but non-significant association between knee complaints lasting more than 30 days the past 12 months and exclusion from the trade was found among floor layers (Hazard Ratio = 1.4, 95% CI = 0.6-3.5).The frequency of self-reported knee complaints was lower among floor layers presently at work in the trade in year 2005 (26.3%) compared with baseline in 1995 (41.1%), while the opposite tendency was seen among graphic designers (20.7% vs. 10.7%). The study suggests that knee complaints are a risk factor for premature exclusion from a knee demanding trade. However, low power of the study precludes strong conclusions. The study also indicates a healthy worker effect among floor layers and a survivor effect among graphic designers.

  15. Can we share questions? Performance of questions from different question banks in a single medical school.

    Science.gov (United States)

    Freeman, Adrian; Nicholls, Anthony; Ricketts, Chris; Coombes, Lee

    2010-01-01

    To use progress testing, a large bank of questions is required, particularly when planning to deliver tests over a long period of time. The questions need not only to be of good quality but also balanced in subject coverage across the curriculum to allow appropriate sampling. Hence as well as creating its own questions, an institution could share questions. Both methods allow ownership and structuring of the test appropriate to the educational requirements of the institution. Peninsula Medical School (PMS) has developed a mechanism to validate questions written in house. That mechanism can be adapted to utilise questions from an International question bank International Digital Electronic Access Library (IDEAL) and another UK-based question bank Universities Medical Assessment Partnership (UMAP). These questions have been used in our progress tests and analysed for relative performance. Data are presented to show that questions from differing sources can have comparable performance in a progress testing format. There are difficulties in transferring questions from one institution to another. These include problems of curricula and cultural differences. Whilst many of these difficulties exist, our experience suggests that it only requires a relatively small amount of work to adapt questions from external question banks for effective use. The longitudinal aspect of progress testing (albeit summatively) may allow more flexibility in question usage than single high stakes exams.

  16. Robustness Analysis of Visual Question Answering Models by Basic Questions

    KAUST Repository

    Huang, Jia-Hong

    2017-11-01

    Visual Question Answering (VQA) models should have both high robustness and accuracy. Unfortunately, most of the current VQA research only focuses on accuracy because there is a lack of proper methods to measure the robustness of VQA models. There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the ranked basic questions, with similarity scores, of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question about the given image. We claim that a robust VQA model is one, whose performance is not changed much when related basic questions as also made available to it as input. We formulate the basic questions generation problem as a LASSO optimization, and also propose a large scale Basic Question Dataset (BQD) and Rscore (novel robustness measure), for analyzing the robustness of VQA models. We hope our BQD will be used as a benchmark for to evaluate the robustness of VQA models, so as to help the community build more robust and accurate VQA models.

  17. Robustness Analysis of Visual Question Answering Models by Basic Questions

    KAUST Repository

    Huang, Jia-Hong

    2017-01-01

    Visual Question Answering (VQA) models should have both high robustness and accuracy. Unfortunately, most of the current VQA research only focuses on accuracy because there is a lack of proper methods to measure the robustness of VQA models. There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the ranked basic questions, with similarity scores, of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question about the given image. We claim that a robust VQA model is one, whose performance is not changed much when related basic questions as also made available to it as input. We formulate the basic questions generation problem as a LASSO optimization, and also propose a large scale Basic Question Dataset (BQD) and Rscore (novel robustness measure), for analyzing the robustness of VQA models. We hope our BQD will be used as a benchmark for to evaluate the robustness of VQA models, so as to help the community build more robust and accurate VQA models.

  18. Mixing modes in a population-based interview survey: comparison of a sequential and a concurrent mixed-mode design for public health research.

    Science.gov (United States)

    Mauz, Elvira; von der Lippe, Elena; Allen, Jennifer; Schilling, Ralph; Müters, Stephan; Hoebel, Jens; Schmich, Patrick; Wetzstein, Matthias; Kamtsiuris, Panagiotis; Lange, Cornelia

    2018-01-01

    Population-based surveys currently face the problem of decreasing response rates. Mixed-mode designs are now being implemented more often to account for this, to improve sample composition and to reduce overall costs. This study examines whether a concurrent or sequential mixed-mode design achieves better results on a number of indicators of survey quality. Data were obtained from a population-based health interview survey of adults in Germany that was conducted as a methodological pilot study as part of the German Health Update (GEDA). Participants were randomly allocated to one of two surveys; each of the surveys had a different design. In the concurrent mixed-mode design ( n  = 617) two types of self-administered questionnaires (SAQ-Web and SAQ-Paper) and computer-assisted telephone interviewing were offered simultaneously to the respondents along with the invitation to participate. In the sequential mixed-mode design ( n  = 561), SAQ-Web was initially provided, followed by SAQ-Paper, with an option for a telephone interview being sent out together with the reminders at a later date. Finally, this study compared the response rates, sample composition, health indicators, item non-response, the scope of fieldwork and the costs of both designs. No systematic differences were identified between the two mixed-mode designs in terms of response rates, the socio-demographic characteristics of the achieved samples, or the prevalence rates of the health indicators under study. The sequential design gained a higher rate of online respondents. Very few telephone interviews were conducted for either design. With regard to data quality, the sequential design (which had more online respondents) showed less item non-response. There were minor differences between the designs in terms of their costs. Postage and printing costs were lower in the concurrent design, but labour costs were lower in the sequential design. No differences in health indicators were found between

  19. A survey of nicotine yields in small cigar smoke: influence of cigar design and smoking regimens.

    Science.gov (United States)

    Goel, Reema; Trushin, Neil; Reilly, Samantha M; Bitzer, Zachary; Muscat, Joshua; Foulds, Jonathan; Richie, John P

    2017-09-27

    While the popularity of small cigar brands that resemble cigarettes, including both little cigars (LC) and filtered cigars (FC), has been on the rise, little is known about the delivery of nicotine from these products. Our objective was to determine the nicotine yields of small cigars in comparison to cigarettes. Nicotine yields from LC, FC and 3R4F and 1R6F research cigarettes were determined from mainstream smoke generated on a smoking machine under the International Organization of Standardization (ISO) and Canadian Intense (CI) methods. Market characteristics (price and package label) and physical features (filter ventilation, product weight, and filter weight, product length and diameter) were also determined for 8 brands of small cigars. Nicotine yields in small cigars averaged 1.24 and 3.49 mg/unit on ISO and CI regimens, respectively, compared to 0.73 and 2.35 mg/unit, respectively, for the research cigarettes. Nicotine yields per puff were similar between small cigars and cigarettes. We also found that FC did not differ from LC in nicotine yields. FC and LC differ from each other in many physical design features (unit weight, filter weight, filter length), but are similar in others (unit length, diameter, filter ventilation). Nicotine delivery from small cigars is similar to or greater than that from cigarettes. Thus, for future research and regulatory purposes, standard definitions need to be developed for small cigars, and FC and LC should be evaluated as separate entities. Small cigars are similar to cigarettes in their design and use. While nicotine yields per puff were similar between products, small cigars delivered substantially higher amounts of nicotine per unit than cigarettes. These findings support the growing body of evidence to justify regulating all small cigars, including little and filtered cigars in a similar fashion as cigarettes. © The Author 2017. Published by Oxford University Press on behalf of the Society for Research on Nicotine

  20. Design and methods in a survey of living conditions in the Arctic - the SLiCA study.

    Science.gov (United States)

    Eliassen, Bent-Martin; Melhus, Marita; Kruse, Jack; Poppel, Birger; Broderstad, Ann Ragnhild

    2012-03-19

    The main objective of this study is to describe the methods and design of the survey of living conditions in the Arctic (SLiCA), relevant participation rates and the distribution of participants, as applicable to the survey data in Alaska, Greenland and Norway. This article briefly addresses possible selection bias in the data and also the ways to tackle it in future studies. Population-based cross-sectional survey. Indigenous individuals aged 16 years and older, living in Greenland, Alaska and in traditional settlement areas in Norway, were invited to participate. Random sampling methods were applied in Alaska and Greenland, while non-probability sampling methods were applied in Norway. Data were collected in 3 periods: in Alaska, from January 2002 to February 2003; in Greenland, from December 2003 to August 2006; and in Norway, in 2003 and from June 2006 to June 2008. The principal method in SLiCA was standardised face-to-face interviews using a questionnaire. A total of 663, 1,197 and 445 individuals were interviewed in Alaska, Greenland and Norway, respectively. Very high overall participation rates of 83% were obtained in Greenland and Alaska, while a more conventional rate of 57% was achieved in Norway. A predominance of female respondents was obtained in Alaska. Overall, the Sami cohort is older than the cohorts from Greenland and Alaska. Preliminary assessments suggest that selection bias in the Sami sample is plausible but not a major threat. Few or no threats to validity are detected in the data from Alaska and Greenland. Despite different sampling and recruitment methods, and sociocultural differences, a unique database has been generated, which shall be used to explore relationships between health and other living conditions variables.

  1. Questions for Music Education Research

    Science.gov (United States)

    Jorgensen, Estelle R.

    2008-01-01

    In addressing the question-set "What questions do music education researchers need to address?", an illustrative list of juxtaposed descriptive and normative questions is sketched as follows: What are and should be the dimensions of music education? What are and should be the institutional agencies of music education? What are and should be the…

  2. Designing and Testing a UAV Mapping System for Agricultural Field Surveying

    Directory of Open Access Journals (Sweden)

    Martin Peter Christiansen

    2017-11-01

    Full Text Available A Light Detection and Ranging (LiDAR sensor mounted on an Unmanned Aerial Vehicle (UAV can map the overflown environment in point clouds. Mapped canopy heights allow for the estimation of crop biomass in agriculture. The work presented in this paper contributes to sensory UAV setup design for mapping and textual analysis of agricultural fields. LiDAR data are combined with data from Global Navigation Satellite System (GNSS and Inertial Measurement Unit (IMU sensors to conduct environment mapping for point clouds. The proposed method facilitates LiDAR recordings in an experimental winter wheat field. Crop height estimates ranging from 0.35–0.58 m are correlated to the applied nitrogen treatments of 0–300 kg N ha . The LiDAR point clouds are recorded, mapped, and analysed using the functionalities of the Robot Operating System (ROS and the Point Cloud Library (PCL. Crop volume estimation is based on a voxel grid with a spatial resolution of 0.04 × 0.04 × 0.001 m. Two different flight patterns are evaluated at an altitude of 6 m to determine the impacts of the mapped LiDAR measurements on crop volume estimations.

  3. Designing and Testing a UAV Mapping System for Agricultural Field Surveying.

    Science.gov (United States)

    Christiansen, Martin Peter; Laursen, Morten Stigaard; Jørgensen, Rasmus Nyholm; Skovsen, Søren; Gislum, René

    2017-11-23

    A Light Detection and Ranging (LiDAR) sensor mounted on an Unmanned Aerial Vehicle (UAV) can map the overflown environment in point clouds. Mapped canopy heights allow for the estimation of crop biomass in agriculture. The work presented in this paper contributes to sensory UAV setup design for mapping and textual analysis of agricultural fields. LiDAR data are combined with data from Global Navigation Satellite System (GNSS) and Inertial Measurement Unit (IMU) sensors to conduct environment mapping for point clouds. The proposed method facilitates LiDAR recordings in an experimental winter wheat field. Crop height estimates ranging from 0.35-0.58 m are correlated to the applied nitrogen treatments of 0-300 kg N ha . The LiDAR point clouds are recorded, mapped, and analysed using the functionalities of the Robot Operating System (ROS) and the Point Cloud Library (PCL). Crop volume estimation is based on a voxel grid with a spatial resolution of 0.04 × 0.04 × 0.001 m. Two different flight patterns are evaluated at an altitude of 6 m to determine the impacts of the mapped LiDAR measurements on crop volume estimations.

  4. Nationwide survey, assessment, and replacement designs of tank systems at 430 emergency broadcast stations

    International Nuclear Information System (INIS)

    Maraj, R.; Whitaker-Sheppard, L.

    1994-01-01

    The Federal Emergency Management Agency (FEMA), acting on behalf of the Federal Communications Commission (FCC), undertook a program to bring into compliance federally-owned underground storage tanks (USTs) at radio and television stations, which are part of the Broadcast Station Protection Program (BSPP) of the Emergency Broadcast System (EBS). These USTs supply fuel (diesel and gasoline) to emergency generators and are located on private property. Woodward-Clyde Federal Services is under contract with FEMA to provide assistance in all phases of the program. The BSPP is designed to protect selected stations that are participants in the EBS, which support emergency preparedness and response operations. Technical standards for installation, spill and overfill protection, corrosion protection, and leak detection for underground storage tanks (UST) were promulgated by the EPA, as described in 53 Federal Register 37082 (September 23, 1988). December 1998 was established as a compliance data for corrosion protection and spill/overfill protection. A compliance period of December 1989 to December 1993 was established for leak detection devices, depending on the UST installation date. Several states have promulgated underground storage tank regulations that are more stringent than the federal requirements. Local agencies in several states may have additional UST requirements. All federal, state, and local UST requirements must be satisfied under a compliance program. The approach and methodology employed by FEMA are presented

  5. [Design and implementation of Chinese materia medica resources survey results display system].

    Science.gov (United States)

    Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Wang, Ling; Zhao, Yan-Ping; Jing, Zhi-Xian; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    From the beginning of the fourth national census of traditional Chinese medicine resources in 2011, a large amount of data have been collected and compiled, including wild medicinal plant resource data, cultivation of medicinal plant information, traditional knowledge, and specimen information. The traditional paper-based recording method is inconvenient for query and application. The B/S architecture, JavaWeb framework and SOA are used to design and develop the fourth national census results display platform. Through the data integration and sorting, the users are to provide with integrated data services and data query display solutions. The platform realizes the fine data classification, and has the simple data retrieval and the university statistical analysis function. The platform uses Echarts components, Geo Server, Open Layers and other technologies to provide a variety of data display forms such as charts, maps and other visualization forms, intuitive reflects the number, distribution and type of Chinese material medica resources. It meets the data mapping requirements of different levels of users, and provides support for management decision-making. Copyright© by the Chinese Pharmaceutical Association.

  6. The Norwegian Offender Mental Health and Addiction Study – Design and Implementation of a National Survey and Prospective Cohort Study

    Directory of Open Access Journals (Sweden)

    Anne Bukten

    2015-01-01

    Full Text Available The Norwegian prison inmates are burdened by problems before they enter prison. Few studies have managed to assess this burden and relate it to what occurs for the inmates once they leave the prison. The Norwegian Offender Mental Health and Addiction (NorMA study is a large-scale longitudinal cohort study that combines national survey and registry data in order to understand mental health, substance use, and criminal activity before, during, and after custody among prisoners in Norway. The main goal of the study is to describe the criminal and health-related trajectories based on both survey and registry linkage information. Data were collected from 1,499 inmates in Norwegian prison facilities during 2013–2014. Of these, 741 inmates provided a valid personal identification number and constitute a cohort that will be examined retrospectively and prospectively, along with data from nationwide Norwegian registries. This study describes the design, procedures, and implementation of the ongoing NorMA study and provides an outline of the initial data.

  7. A practical guide to surveys and questionnaires.

    Science.gov (United States)

    Slattery, Eric L; Voelker, Courtney C J; Nussenbaum, Brian; Rich, Jason T; Paniello, Randal C; Neely, J Gail

    2011-06-01

    Surveys with questionnaires play a vital role in decision and policy making in society. Within medicine, including otolaryngology, surveys with questionnaires may be the only method for gathering data on rare or unusual events. In addition, questionnaires can be developed and validated to be used as outcome measures in clinical trials and other clinical research architecture. Consequently, it is fundamentally important that such tools be properly developed and validated. Just asking questions that have not gone through rigorous design and development may be misleading and unfair at best; at worst, they can result in under- or overtreatment and unnecessary expense. Furthermore, it is important that consumers of the data produced by these instruments understand the principles of questionnaire design to interpret results in an optimal and meaningful way. This article presents a practical guide for understanding the methodologies of survey and questionnaire design, including the concepts of validity and reliability, how surveys are administered and implemented, and, finally, biases and pitfalls of surveys.

  8. Prevalence of coronary artery disease and coronary risk factors in Kerala, South India: A population surveyDesign and methods

    Directory of Open Access Journals (Sweden)

    Geevar Zachariah

    2013-05-01

    Methods: The design of the study was cross-sectional population survey. We estimated the sample size based on an anticipated prevalence of 7.4% of CAD for rural and 11% for urban Kerala. The derived sample sizes for rural and urban areas were 3000 and 2400, respectively. The urban areas for sampling constituted one ward each from three municipal corporations at different parts of the state. The rural sample was drawn from two panchayats each in the same districts as the urban sample. One adult from each household in the age group of 20–59 years was selected using Kish method. All subjects between 60 and 79 years were included from each household. A detailed questionnaire was administered to assess the risk factors, history of CAD, family history, educational status, socioeconomic status, dietary habits, physical activity and treatment for CAD; anthropometric measurements, blood pressure, electrocardiogram and fasting blood levels of glucose and lipids were recorded.

  9. Design of a Mars Airplane Propulsion System for the Aerial Regional-Scale Environmental Survey (ARES) Mission Concept

    Science.gov (United States)

    Kuhl. Christopher A.

    2009-01-01

    The Aerial Regional-Scale Environmental Survey (ARES) is a Mars exploration mission concept with the goal of taking scientific measurements of the atmosphere, surface, and subsurface of Mars by using an airplane as the payload platform. ARES team first conducted a Phase-A study for a 2007 launch opportunity, which was completed in May 2003. Following this study, significant efforts were undertaken to reduce the risk of the atmospheric flight system, under the NASA Langley Planetary Airplane Risk Reduction Project. The concept was then proposed to the Mars Scout program in 2006 for a 2011 launch opportunity. This paper summarizes the design and development of the ARES airplane propulsion subsystem beginning with the inception of the ARES project in 2002 through the submittal of the Mars Scout proposal in July 2006.

  10. Lecture Hall and Learning Design: A Survey of Variables, Parameters, Criteria and Interrelationships for Audio-Visual Presentation Systems and Audience Reception.

    Science.gov (United States)

    Justin, J. Karl

    Variables and parameters affecting architectural planning and audiovisual systems selection for lecture halls and other learning spaces are surveyed. Interrelationships of factors are discussed, including--(1) design requirements for modern educational techniques as differentiated from cinema, theater or auditorium design, (2) general hall…

  11. Exploring the Learning Problems and Resource Usage of Undergraduate Industrial Design Students in Design Studio Courses

    Science.gov (United States)

    Chen, Wenzhi

    2016-01-01

    Design is a powerful weapon for modern companies so it is important to have excellent designers in the industry. The purpose of this study is to explore the learning problems and the resources that students use to overcome problems in undergraduate industrial design studio courses. A survey with open-type questions was conducted to collect data.…

  12. Guided Discovery with Socratic Questioning

    Directory of Open Access Journals (Sweden)

    M. Hakan Türkçapar

    2015-04-01

    Full Text Available “The Socratic method” is a way of teaching philosophical thinking and knowledge by asking questions. It was first used by in ancient times by the Greek philosopher Socrates who taught his followers by asking questions; these conversations between them are known as “Socratic dialogues”. In this methodology, no new knowledge is taught to the individual; rather, the individual is guided to remember and rediscover what was formerly known through this process. The main method used in cognitive therapy is guided discovery. There are various methods of guided discovery in cognitive therapy. The form of verbal exchange between the therapist and client which is used during the process of cognitive behavioral therapy is known as “socratic questioning”. In this method the goal is to make the client rediscover, with a series of questions, a piece of knowledge which he could otherwise know but is not presently conscious of. The Socratic Questioning consists of several steps, including: identifying the problem by listening to the client and making reflections, finding alternatives by examining and evaluating, reidentification by using the newly rediscovered information and questioning the old distorted belief, and reaching a new conclusion and applying it. Question types used during these procedures are: questions for collecting information, questions revealing meanings, questions revealing beliefs, questions about behaviours during similar past experiences, analytic questions and analytic synthesis questions. In order to make the patient feel understood, it is important to be empathetic and summarize the problem during the interview. In this text, steps of Socratic Questioning-Guided Discovery will be reviewed with sample dialogues provided for each step. [JCBPR 2015; 4(1.000: 47-53

  13. Response to Questions on Presentation to NAS

    Energy Technology Data Exchange (ETDEWEB)

    Meier, W R

    2011-03-17

    Response to questions on the presentation 'Overview to Chamber and Power Plant Designs for IFE' made at the 1/29-31 meeting of the National Academies Committee on the Prospects for Inertial Confinement Fusion Energy Systems.

  14. Managerial Skills Teaching: Ten Questions and Answers.

    Science.gov (United States)

    McEnrue, Mary Pat

    2002-01-01

    Presents considerations for design and delivery of management skills courses as sets of questions in three categories: (1) preteaching (understanding and teaching skills, teacher qualities); (2) class (skills learning, learning barriers, cultural elements, learning assessment); and application/evaluation (lifelong learning, course evaluation,…

  15. Do clinicians use more question marks?

    NARCIS (Netherlands)

    Zijlmans, Maeike; Otte, Willem M; Van't Klooster, Maryse A; van Diessen, Eric; Leijten, Frans Ss; Sander, Josemir W

    2015-01-01

    OBJECTIVE: To quantify the use of question marks in titles of published studies. DESIGN AND SETTING: Literature review. PARTICIPANTS: All Pubmed publications between 1 January 2013 and 31 December 2013 with an available abstract. Papers were classified as being clinical when the search terms clin*,

  16. Comparison of Performance on Multiple-Choice Questions and Open-Ended Questions in an Introductory Astronomy Laboratory

    Science.gov (United States)

    Wooten, Michelle M.; Cool, Adrienne M.; Prather, Edward E.; Tanner, Kimberly D.

    2014-01-01

    When considering the variety of questions that can be used to measure students' learning, instructors may choose to use multiple-choice questions, which are easier to score than responses to open-ended questions. However, by design, analyses of multiple-choice responses cannot describe all of students' understanding. One method that can…

  17. Questioning Questions: Elementary Teachers' Adaptations of Investigation Questions Across the Inquiry Continuum

    Science.gov (United States)

    Biggers, Mandy

    2018-02-01

    Questioning is a central practice in science classrooms. However, not every question translates into a "good" science investigation. Questions that drive science investigations can be provided by many sources including the teacher, the curriculum, or the student. The variations in the source of investigation questions were explored in this study. A dataset of 120 elementary science classroom videos and associated lesson plans from 40 elementary teachers (K-5) across 21 elementary school campuses were scored on an instrument measuring the amount of teacher-direction or student-direction of the lessons' investigation questions. Results indicated that the investigation questions were overwhelmingly teacher directed in nature, with no opportunities for students to develop their own questions for investigation. This study has implications for researchers and practitioners alike, calling attention to the teacher-directed nature of investigation questions in existing science curriculum materials, and the need for teacher training in instructional strategies to adapt their existing curriculum materials across the continuum of teacher-directed and student-directed investigation questions. Teachers need strategies for adapting the teacher-directed questions provided in their existing curriculum materials in order to allow students the opportunity to engage in this essential scientific practice.

  18. Questioning care at the end of life.

    Science.gov (United States)

    Ruopp, Patricia; Good, Mary-Jo Delvecchio; Lakoma, Matthew; Gadmer, Nina M; Arnold, Robert M; Block, Susan D

    2005-06-01

    medical error and the culture of medicine. Physicians' questions about care can contribute to designing training experiences for residents and to improving the quality of systems that affect patients' experiences at life's end and physicians' experiences in caring for dying patients.

  19. Total Survey Error for Longitudinal Surveys

    NARCIS (Netherlands)

    Lynn, Peter; Lugtig, P.J.

    2016-01-01

    This article describes the application of the total survey error paradigm to longitudinal surveys. Several aspects of survey error, and of the interactions between different types of error, are distinct in the longitudinal survey context. Furthermore, error trade-off decisions in survey design and

  20. Leading survey and research report for fiscal 1999. Survey and research on advanced design technology for electronic system; 1999 nendo electronics kiki sekkeiryoku kyoka gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The efforts center on techniques for optimizing the designing process of the system-on-chip (SoC) which assumes the most important part in the technology involved. An SoC is a system in which most of the system-constituting functions are integrated on a single chip, whose design is growing increasingly difficult to prepare because its circuitry containing complicated functions is growing larger in scale at an annual rate of 58%. Its elements are growing microstructural at a sharp pace, and a very optimum designing technique is required to deal with the development. Under the circumstances, the numbers of engineers and man-hours required to cope with the situation are increasing exponentially. The improvement of design productivity at the present time stays at a low annual rate of 21%. Surveyed are the background, objective, and necessity of the research and development of technologies for the whole designing process consisting of the function designing stage which is of the highest level, the logical circuit designing stage, and the manufacturing process designing stage. Furthermore, the current status, research, and development of related technologies and the status of related patents in Japan and overseas are surveyed. Studies are also conducted about the goals of technologies to be developed and about breakthrough points before achieving the goals, and a development project is assumed and proposed. (NEDO)

  1. Some questions on small uranium open-pit mines

    International Nuclear Information System (INIS)

    Li Junyi

    1992-01-01

    The experiences of the existing uranium open pits are summarized and the questions in design, erection and production are analyzed. It is important helpful to develop and to design such economical and reasonable small uranium open pits

  2. The Value Question in Metaphysics

    Science.gov (United States)

    Kahane, Guy

    2012-01-01

    Much seems to be at stake in metaphysical questions about, for example, God, free will or morality. One thing that could be at stake is the value of the universe we inhabit—how good or bad it is. We can think of competing philosophical positions as describing possibilities, ways the world might turn out to be, and to which value can be assigned. When, for example, people hope that God exists, or fear that we do not possess free will, they express attitudes towards these possibilities, attitudes that presuppose answers to questions about their comparative value. My aim in this paper is to distinguish these evaluative questions from related questions with which they can be confused, to identify structural constraints on their proper pursuit, and to address objections to their very coherence. Answers to such evaluative questions offer one measure of the importance of philosophical disputes. PMID:23024399

  3. The Value Question in Metaphysics.

    Science.gov (United States)

    Kahane, Guy

    2012-07-01

    Much seems to be at stake in metaphysical questions about, for example, God, free will or morality. One thing that could be at stake is the value of the universe we inhabit-how good or bad it is. We can think of competing philosophical positions as describing possibilities, ways the world might turn out to be, and to which value can be assigned. When, for example, people hope that God exists, or fear that we do not possess free will, they express attitudes towards these possibilities, attitudes that presuppose answers to questions about their comparative value. My aim in this paper is to distinguish these evaluative questions from related questions with which they can be confused, to identify structural constraints on their proper pursuit, and to address objections to their very coherence. Answers to such evaluative questions offer one measure of the importance of philosophical disputes.

  4. SCIENTIFIC SUPPORT OF SURVEY, DESIGN, CONSTRUCTION AND OPERATION OF THE MOTHER OF GOD DITCH OF SERAPHIMO-DIVEEVSKY MONASTERY

    Directory of Open Access Journals (Sweden)

    Darchiya Valentina Ivanovna

    2018-02-01

    Full Text Available Subject: the article describes the structure, technologies of construction, gardening and exploitation of the Holy Trinity Seraphimo-Diveevsky Monastery - the ancient linear fortification consisting of a ditch and an earth embankment that is located directly above the ditch. Research objectives: ensure the stability of slopes, create a technique for gardening of steep slopes in difficult microclimatic conditions, ensure drainage of water. Materials and methods: the computational techniques were used to ensure stability of slopes, and experimental techniques were applied for their phyto-fixation; geosynthetics, rebar grids, varietal herbs, gooseberries and thuja were used. Results: for recreation of the unique structure, a special set of design, survey and construction works was developed, as well as works to maintain the structure during its exploitation. In particular, we have developed the method of detection of the recreated ditch based on the stratification of bulk soils by their age; the methods for fastening the slopes; lawn grass mixture formula for slopes with angles of 45° and 65°; drainage system. Conclusions: owing to the research work, for the first time this construction was completed with the required parameters, while the earlier recreation attempts failed due to erosion and landslide processes. The developed methods can be applied for recreation of other ancient defensive fortifications on the fields of great battles and for landscaping the territories with complex relief.

  5. The Cornella Health Interview Survey Follow-Up (CHIS.FU Study: design, methods, and response rate

    Directory of Open Access Journals (Sweden)

    Perez Gloria

    2003-03-01

    Full Text Available Abstract Background The aim of this report is to describe the main characteristics of the design, including response rates, of the Cornella Health Interview Survey Follow-up Study. Methods The original cohort consisted of 2,500 subjects (1,263 women and 1,237 men interviewed as part of the 1994 Cornella Health Interview Study. A record linkage to update the address and vital status of the cohort members was carried out using, first a deterministic method, and secondly a probabilistic one, based on each subject's first name and surnames. Subsequently, we attempted to locate the cohort members to conduct the phone follow-up interviews. A pilot study was carried out to test the overall feasibility and to modify some procedures before the field work began. Results After record linkage, 2,468 (98.7% subjects were successfully traced. Of these, 91 (3.6% were deceased, 259 (10.3% had moved to other towns, and 50 (2.0% had neither renewed their last municipal census documents nor declared having moved. After using different strategies to track and to retain cohort members, we traced 92% of the CHIS participants. From them, 1,605 subjects answered the follow-up questionnaire. Conclusion The computerized record linkage maximized the success of the follow-up that was carried out 7 years after the baseline interview. The pilot study was useful to increase the efficiency in tracing and interviewing the respondents.

  6. Efficient question answering with question decomposition and multiple answer streams

    OpenAIRE

    Hartrumpf, Sven; Glöckner, Ingo; Leveling, Johannes

    2009-01-01

    The German question answering (QA) system IRSAW (formerly: InSicht) participated in QA@CLEF for the fth time. IRSAW was introduced in 2007 by integrating the deep answer producer InSicht, several shallow answer producers, and a logical validator. InSicht builds on a deep QA approach: it transforms documents to semantic representations using a parser, draws inferences on semantic representations with rules, and matches semantic representations derived from questions and documents. InS...

  7. 2012 Mask Industry Survey

    Science.gov (United States)

    Malloy, Matt; Litt, Lloyd C.

    2012-11-01

    A survey supported by SEMATECH and administered by David Powell Consulting was sent to semiconductor industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. 2012 marks the 11th consecutive year for the mask industry survey. This year's survey and reporting structure are similar to those of the previous years with minor modifications based on feedback from past years and the need to collect additional data on key topics. Categories include general mask information, mask processing, data and write time, yield and yield loss, delivery times, and maintenance and returns. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. Results, initial observations, and key comparisons between the 2011 and 2012 survey responses are shown here, including multiple indications of a shift towards the manufacturing of higher end photomasks.

  8. Phrasal Paraphrase Based Question Reformulation for Archived Question Retrieval.

    Directory of Open Access Journals (Sweden)

    Yu Zhang

    Full Text Available Lexical gap in cQA search, resulted by the variability of languages, has been recognized as an important and widespread phenomenon. To address the problem, this paper presents a question reformulation scheme to enhance the question retrieval model by fully exploring the intelligence of paraphrase in phrase-level. It compensates for the existing paraphrasing research in a suitable granularity, which either falls into fine-grained lexical-level or coarse-grained sentence-level. Given a question in natural language, our scheme first detects the involved key-phrases by jointly integrating the corpus-dependent knowledge and question-aware cues. Next, it automatically extracts the paraphrases for each identified key-phrase utilizing multiple online translation engines, and then selects the most relevant reformulations from a large group of question rewrites, which is formed by full permutation and combination of the generated paraphrases. Extensive evaluations on a real world data set demonstrate that our model is able to characterize the complex questions and achieves promising performance as compared to the state-of-the-art methods.

  9. Questioning ORACLE: An Assessment of ORACLE's Analysis of Teachers' Questions and [A Comment on "Questioning ORACLE"].

    Science.gov (United States)

    Scarth, John; And Others

    1986-01-01

    Analysis of teachers' questions, part of the ORACLE (Observation Research and Classroom Learning Evaluation) project research, is examined in detail. Scarth and Hammersley argue that the rules ORACLE uses for identifying different types of questions involve levels of ambiguity and inference that threaten reliability and validity of the study's…

  10. From Question Answering to Visual Exploration

    Energy Technology Data Exchange (ETDEWEB)

    McColgin, Dave W.; Gregory, Michelle L.; Hetzler, Elizabeth G.; Turner, Alan E.

    2006-08-11

    Research in Question Answering has focused on the quality of information retrieval or extraction using the metrics of precision and recall to judge success; these metrics drive toward finding the specific best answer(s) and are best supportive of a lookup type of search. These do not address the opportunity that users? natural language questions present for exploratory interactions. In this paper, we present an integrated Question Answering environment that combines a visual analytics tool for unstructured text and a state-of-the-art query expansion tool designed to compliment the cognitive processes associated with an information analysts work flow. Analysts are seldom looking for factoid answers to simple questions; their information needs are much more complex in that they may be interested in patterns of answers over time, conflicting information, and even related non-answer data may be critical to learning about a problem or reaching prudent conclusions. In our visual analytics tool, questions result in a comprehensive answer space that allows users to explore the variety within the answers and spot related information in the rest of the data. The exploratory nature of the dialog between the user and this system requires tailored evaluation methods that better address the evolving user goals and counter cognitive biases inherent to exploratory search tasks.

  11. Management and design of hospital pens relative to behavior of the compromised dairy cow: A questionnaire survey of Iowa dairy farms

    DEFF Research Database (Denmark)

    Fogsgaard, Katrine Kop; Herskin, Mette S.; Gorden, Patrick J.

    2016-01-01

    on best prac-tices for housing and management of compromised cows. The purpose of this study was to providedescriptive information about management and husbandry practices of compromised cows on dairyfarms in Iowa. A questionnaire-based survey was designed to examine demographic information, designand...

  12. Climate Leadership Awards Frequent Questions

    Science.gov (United States)

    Provides answers to frequently asked questions regarding the Climate Leadership Awards, sponsored by EPA's Center for Corporate Climate Leadership with co-sponsorship from the Center for Climate and Energy Solutions and The Climate Registry.

  13. Interview Questions with Bentham Scientific

    Science.gov (United States)

    Mather, John C.

    2013-01-01

    John Mather answers questions for an interview for the Bentham Science Newsletter. He covers topics ranging from his childhood, his professional career and his thoughts on research, technology and today's scientists and engineers.

  14. RESULTS OF THE QUALITATIVE QUESTIONS

    International Development Research Centre (IDRC) Digital Library (Canada)

    Adam Graham

    In April of 2005, Governance, Equity and Health (GEH) held an all-partners' ... data collected – six respondents left a blank response for the question addressing level of ... Meeting participants were organized into five thematic working groups:.

  15. Instance-Based Question Answering

    Science.gov (United States)

    2006-12-01

    cluster-based query expan- sion, learning answering strategies, machine learning in NLP To my wife Monica Abstract During recent years, question...process is typically tedious and involves expertise in crafting and implement- ing these models (e.g. rule-based), utilizing NLP resources, and...questions. For languages that use capitalization (e.g. not Chinese or Arabic ) for named entities, IBQA can make use of NE classing (e.g. “Bob Marley

  16. User Acceptability of Design Concepts for a Life Sign Detection System

    National Research Council Canada - National Science Library

    Beidleman, Beth

    2003-01-01

    .... Over the next four days of testing (Days 2-5), each soldier wore each of the four design concepts for 24 h and completed a user acceptability survey containing yes/no and 9-point hedonic scale questions...

  17. Protein Electrochemistry: Questions and Answers.

    Science.gov (United States)

    Fourmond, V; Léger, C

    This chapter presents the fundamentals of electrochemistry in the context of protein electrochemistry. We discuss redox proteins and enzymes that are not photoactive. Of course, the principles described herein also apply to photobioelectrochemistry, as discussed in later chapters of this book. Depending on which experiment is considered, electron transfer between proteins and electrodes can be either direct or mediated, and achieved in a variety of configurations: with the protein and/or the mediator free to diffuse in solution, immobilized in a thick, hydrated film, or adsorbed as a sub-monolayer on the electrode. The experiments can be performed with the goal to study the protein or to use it. Here emphasis is on mechanistic studies, which are easier in the configuration where the protein is adsorbed and electron transfer is direct, but we also explain the interpretation of signals obtained when diffusion processes affect the response.This chapter is organized as a series of responses to questions. Questions 1-5 are related to the basics of electrochemistry: what does "potential" or "current" mean, what does an electrochemical set-up look like? Questions 6-9 are related to the distinction between adsorbed and diffusive redox species. The answers to questions 10-13 explain the interpretation of slow and fast scan voltammetry with redox proteins. Questions 14-19 deal with catalytic electrochemistry, when the protein studied is actually an enzyme. Questions 20, 21 and 22 are general.

  18. Participatory Design with Dyslectics

    DEFF Research Database (Denmark)

    Vangeli, Panagiota; Stage, Jan

    2017-01-01

    Participatory Design has been used successfully in many projects but the question is how participatory design works with people with a cognitive disorder like dyslexia. In this study, we analyzed observations of participatory design sessions with dyslectic participants for developing designs...... of a reading software application by applying two participatory design methods: the IDEAS and CI methods. Furthermore, we conducted online surveys to gather information on dyslectics participants’ and their special-education teachers’ opinion regarding the participatory design process, methods and final...... designs. The results indicate that participatory design works effectively with dyslectic people provided the participation of Proxy Users to represent dyslectics, when it is necessary, the participation of an experienced on dyslexia facilitator who has the knowledge to address incidents caused due...

  19. Design of Gravity Survey Network using Fractal Theory to Delineate Hydrocarbon bearing Jabera Structure, Vindhyan Basin, Central India

    Science.gov (United States)

    Dimri, V. P.; Srivastava, R. P.; Vedanti, N.

    2006-12-01

    A gravity survey network was designed using fractal dimension analysis to delineate a domal structure (Jabera dome) reported in southeastern part of the Vindhyan basin, Central India. This area is also regarded as a `high risk-high reward' frontier area for hydrocarbon exploration in previous studies, hence our aim was to delineate shape and lateral extent of the reported domal structure. Based on the synthetic grid, designed using the concept of fractal dimension, gravity data is collected in Jabera-Damoh area of Vindhyan basin. The collected data is random, but the data density is significant, hence the data points are sorted in a way so that they are close to the synthetic grid points of given grid interval. After sorting the data, again the fractal dimension analysis using box counting method has been carried out to avoid the aliasing in the data due to interpolation and also to know the optimum number of data points sufficient for desired quality of Bouguer anomaly maps. Optimization of number of stations takes care of time and cost involved in the survey and the detectibility limit ensures that the data collected is good enough to resolve the target body under study. The fractal dimension analysis gives clue to select these parameters. It showed that it is always preferable to have well distributed station locations instead of clustering the observation points at some geologically known feature because clustering of data points below required station spacing is not going to add much information where as equally distributed observation points add the information. The study area lies in a difficult terrain of Vindhayn basin, hence according to the accessibility, fractal dimension analysis of the real data sorted approximately at regular grid intervals on 2,3, and 4 km has been done and using the concept of optimum gridding interval Bouguer anomaly maps of the region are prepared. The preliminary depth values of the major interfaces in the area were obtained

  20. Geothermal energy as a source of electricity. A worldwide survey of the design and operation of geothermal power plants

    Energy Technology Data Exchange (ETDEWEB)

    DiPippo, R.

    1980-01-01

    An overview of geothermal power generation is presented. A survey of geothermal power plants is given for the following countries: China, El Salvador, Iceland, Italy, Japan, Mexico, New Zealand, Philippines, Turkey, USSR, and USA. A survey of countries planning geothermal power plants is included. (MHR)

  1. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    This publication is unique in its demystification and operationalization of the complex and elusive nature of the design process. The publication portrays the designer’s daily work and the creative process, which the designer is a part of. Apart from displaying the designer’s work methods...... and design parameters, the publication shows examples from renowned Danish design firms. Through these examples the reader gets an insight into the designer’s reality....

  2. Surveying Education

    DEFF Research Database (Denmark)

    Enemark, Stig

    2009-01-01

    In relation to surveying education there is one big question to be asked: Is the role of the surveyors changing? In a global perspective the answer will be "Yes". There is a big swing that could be entitled "From Measurement to Management". This does not imply that measurement is no longer....... In surveying education there are a range of other challenges to be faced. These relate to the focus on learning to learn; the need for flexible curriculum to deal with constant change; the move towards introducing virtual academy; the demand for creating a quality culture; and the perspective of lifelong...... on an efficient interaction between education, research, and professional practice....

  3. Melodic Dictation Instruction: A Survey of Advanced Placement Music Theory Teachers

    Science.gov (United States)

    Buonviri, Nathan O.; Paney, Andrew S.

    2015-01-01

    Based on relevant literature and recent qualitative findings, the purpose of this survey research was to identify pedagogical approaches to melodic dictation employed by Advanced Placement (AP) Music Theory teachers across the United States. The researcher-designed survey questions focused on pitch and rhythm skills, instructional resources,…

  4. Survey questions evidence of US female hiring bias

    Science.gov (United States)

    Gwynne, Peter

    2013-09-01

    An analysis by the American Institute of Physics (AIP) suggests that the complete absence of female faculty in more than a third of US university physics departments does not necessarily constitute evidence that they discriminate against women.

  5. Inclusion of mobile phone numbers into an ongoing population health survey in New South Wales, Australia: design, methods, call outcomes, costs and sample representativeness.

    Science.gov (United States)

    Barr, Margo L; van Ritten, Jason J; Steel, David G; Thackway, Sarah V

    2012-11-22

    In Australia telephone surveys have been the method of choice for ongoing jurisdictional population health surveys. Although it was estimated in 2011 that nearly 20% of the Australian population were mobile-only phone users, the inclusion of mobile phone numbers into these existing landline population health surveys has not occurred. This paper describes the methods used for the inclusion of mobile phone numbers into an existing ongoing landline random digit dialling (RDD) health survey in an Australian state, the New South Wales Population Health Survey (NSWPHS). This paper also compares the call outcomes, costs and the representativeness of the resultant sample to that of the previous landline sample. After examining several mobile phone pilot studies conducted in Australia and possible sample designs (screening dual-frame and overlapping dual-frame), mobile phone numbers were included into the NSWPHS using an overlapping dual-frame design. Data collection was consistent, where possible, with the previous years' landline RDD phone surveys and between frames. Survey operational data for the frames were compared and combined. Demographic information from the interview data for mobile-only phone users, both, and total were compared to the landline frame using χ2 tests. Demographic information for each frame, landline and the mobile-only (equivalent to a screening dual frame design), and the frames combined (with appropriate overlap adjustment) were compared to the NSW demographic profile from the 2011 census using χ2 tests. In the first quarter of 2012, 3395 interviews were completed with 2171 respondents (63.9%) from the landline frame (17.6% landline only) and 1224 (36.1%) from the mobile frame (25.8% mobile only). Overall combined response, contact and cooperation rates were 33.1%, 65.1% and 72.2% respectively. As expected from previous research, the demographic profile of the mobile-only phone respondents differed most (more that were young, males, Aboriginal

  6. Design of the Digital Sky Survey DA and online system: A case history in the use of computer aided tools for data acquisition system design

    Science.gov (United States)

    Petravick, D.; Berman, E.; Nicinski, T.; Rechenmacher, R.; Oleynik, G.; Pordes, R.; Stoughton, C.

    1991-06-01

    As part of its expanding Astrophysics program, Fermilab is participating in the Digital Sky Survey (DSS). Fermilab is part of a collaboration involving University of Chicago, Princeton University, and the Institute of Advanced Studies (at Princeton). The DSS main results will be a photometric imaging survey and a redshift survey of galaxies and color-selected quasars over pi steradians of the Northern Galactic Cap. This paper focuses on our use of Computer Aided Software Engineering (CASE) in specifying the data system for DSS. Extensions to standard methodologies were necessary to compensate for tool shortcomings and to improve communication amongst the collaboration members. One such important extension was the incorporation of CASE information into the specification document.

  7. Probability and Statistics: 5 Questions

    DEFF Research Database (Denmark)

    Probability and Statistics: 5 Questions is a collection of short interviews based on 5 questions presented to some of the most influential and prominent scholars in probability and statistics. We hear their views on the fields, aims, scopes, the future direction of research and how their work fits...... in these respects. Interviews with Nick Bingham, Luc Bovens, Terrence L. Fine, Haim Gaifman, Donald Gillies, James Hawthorne, Carl Hoefer, James M. Joyce, Joseph B. Kadane Isaac Levi, D.H. Mellor, Patrick Suppes, Jan von Plato, Carl Wagner, Sandy Zabell...

  8. Design-considerations For A Ground-based Transit Survey To Find Habitable Planets Around L And T Dwarfs

    Science.gov (United States)

    Tata, Ramarao; Martin, E.

    2011-09-01

    Detection of planets in the habitable zone is one of the key drivers of the exoplanet science community. We present a detailed strategy for such detection around L and T dwarfs. We plan to implement the outcome of the analysis as a transit survey to search for planets around known L and T dwarfs. Understanding of the variability of these cool objects will be a worth-while byproduct of such a survey.

  9. Understanding Bitcoins: Facts and Questions

    Directory of Open Access Journals (Sweden)

    Bruno Saboia de Albuquerque

    2015-03-01

    Full Text Available The objective of this work is to do a research challenge about the digital currency named Bitcoins, as well as exploit the general concept behind digital currencies and cryptocurrencies, and enumerate some of its current criticism and problems. Such currencies usage and public knowledge is increasing hastily on the last few months, and many questions arise with its popularity.

  10. What Children Learn from Questioning

    Science.gov (United States)

    Harris, Paul

    2015-01-01

    Research shows that young children ask a multitude of why and how questions. And when they do, they're not simply trying to get adult attention; instead, they're actively seeking information. In this article, Paul Harris describes the findings of a number of research analyses based on extensive transcripts of children's natural speech. Some of the…

  11. Allocation of expenditures within the household: A new Danish survey*

    DEFF Research Database (Denmark)

    Bonke, Jens; Browning, Martin

    We report on a new data initiative that is designed to address the question of “who gets what” within the household. The data consists of supplements to the Danish Expenditure Survey (DES) which is a traditional nationally representative, diary based survey of expenditures. We collect supplementary...... data of two kinds for all couples (with or without children) in the survey. The first addition is that respondents report on the intra-household allocation of each item of expenditure (‘joint’, ‘her’, ‘him’, ‘children’ and ‘outside’). The second addition is an extra set of ‘sociological’ questions...... concerning household management, autonomy and family background. These types of information for the same respondents may facilitate research bridging the divergent views of economist and sociologists concerning the allocation of resources within the household. The paper focuses on the survey design and gives...

  12. A framework for laboratory pre-work based on the concepts, tools and techniques questioning method

    International Nuclear Information System (INIS)

    Huntula, J; Sharma, M D; Johnston, I; Chitaree, R

    2011-01-01

    Learning in the laboratory is different from learning in other contexts because students have to engage with various aspects of the practice of science. They have to use many skills and knowledge in parallel-not only to understand the concepts of physics but also to use the tools and analyse the data. The question arises, how to best guide students' learning in the laboratory. This study is about creating and using questions with a specifically designed framework to aid learning in the laboratory. The concepts, tools and techniques questioning (CTTQ) method was initially designed and used at Mahidol University, Thailand, and was subsequently extended to laboratory pre-work at the University of Sydney. The CTTQ method was implemented in Sydney with 190 first-year students. Three pre-work exercises on a series of electrical experiments were created based on the CTTQ method. The pre-works were completed individually and submitted before the experiment started. Analysed pre-work, surveys and interviews were used to evaluate the pre-work questions in this study. The results indicated that the CTTQ method was successful and the flow in the experiments was better than that in the previous year. At the same time students had difficulty with the last experiment in the sequence and with techniques.

  13. Semi-automated categorization of open-ended questions

    Directory of Open Access Journals (Sweden)

    Matthias Schonlau

    2016-08-01

    Full Text Available Text data from open-ended questions in surveys are difficult to analyze and are frequently ignored. Yet open-ended questions are important because they do not constrain respondents’ answer choices. Where open-ended questions are necessary, sometimes multiple human coders hand-code answers into one of several categories. At the same time, computer scientists have made impressive advances in text mining that may allow automation of such coding. Automated algorithms do not achieve an overall accuracy high enough to entirely replace humans. We categorize open-ended questions soliciting narrative responses using text mining for easy-to-categorize answers and humans for the remainder using expected accuracies to guide the choice of the threshold delineating between “easy” and “hard”. Employing multinomial boosting avoids the common practice of converting machine learning “confidence scores” into pseudo-probabilities. This approach is illustrated with examples from open-ended questions related to respondents’ advice to a patient in a hypothetical dilemma, a follow-up probe related to respondents’ perception of disclosure/privacy risk, and from a question on reasons for quitting smoking from a follow-up survey from the Ontario Smoker’s Helpline. Targeting 80% combined accuracy, we found that 54%-80% of the data could be categorized automatically in research surveys.

  14. Enhancing Science Kits with the Driving Question Board

    Science.gov (United States)

    Nordine, Jeff; Torres, Ruben

    2013-01-01

    This article describes the driving question board (DQB), a visual organizer that supports inquiry-based instruction through the use of guiding questions. The DQB is a teaching aid designed to increase student engagement alongside science kits. Information is provided on its application to a lesson on buoyancy, highlighting how it improved…

  15. Multiple choice questions in electronics and electrical engineering

    CERN Document Server

    DAVIES, T J

    2013-01-01

    A unique compendium of over 2000 multiple choice questions for students of electronics and electrical engineering. This book is designed for the following City and Guilds courses: 2010, 2240, 2320, 2360. It can also be used as a resource for practice questions for any vocational course.

  16. Comparison of performance on multiple-choice questions and open-ended questions in an introductory astronomy laboratory

    OpenAIRE

    Michelle M. Wooten; Adrienne M. Cool; Edward E. Prather; Kimberly D. Tanner

    2014-01-01

    When considering the variety of questions that can be used to measure students’ learning, instructors may choose to use multiple-choice questions, which are easier to score than responses to open-ended questions. However, by design, analyses of multiple-choice responses cannot describe all of students’ understanding. One method that can be used to learn more about students’ learning is the analysis of the open-ended responses students’ provide when explaining their multiple-choice response. I...

  17. A survey of physicians' experience and awareness of institutional provisions designed to foster patient engagement in KSA

    Directory of Open Access Journals (Sweden)

    Bayan S. Shahahmad, MBA

    2018-06-01

    لممارسة وأولئك الذين يشغلون مناصب إدارية عليا هم أكثر من يقدم الدعم، ويقدر أهمية تعزيز مشاركة المريض في ممارستهم. Abstract: Objectives: To survey physicians' perceptions of their experience and awareness of institutional provisions that can potentially foster patient engagement (PE in KSA. Methods: In April 2017, an online survey was distributed to clinicians in KSA using Google Forms. The instrument contained questions about the physicians' awareness and experience of their institutions' provision of resources and support. Results: Three hundred and twenty-five clinicians responded to the survey The results showed that 18.5% claimed that their institutions allowed online scheduling of appointments; 8.9% reported the institutions permitted contact between patients and physicians through email; 24.0% reported they provided patients with online access to health records and test results; 55.7% claimed they provided educational multimedia programming; and 74.8% confirmed they encouraged joint decision-making between physicians and patients. Only 34.5% of respondents claimed their institutions provided home visits for high-risk patients. Six of 10 respondents thought that such provisions would have positive outcomes for them and for their patients. Conclusions: Clinicians are aware of and value provisions that foster PE. However, several institutions in KSA do not support or have provisions in place to foster PE. Male clinicians with longer durations of practice and those with higher administrative positions are more likely to value the importance of PE and support and use it in their practice. الكلمات المفتاحية: إشراك, المؤسسية, المريض, الأحكام, الدعم, Keywords: Foster, Institutional provision, Patient engagement

  18. Importance of questionnaire context for a physical activity question

    DEFF Research Database (Denmark)

    Jørgensen, M. E.; Sørensen, Mette Rosenlund; Ekholm, O.

    2013-01-01

    ; however, this has never been shown for physical activity questions. The aim was to study the influence of different formulations and question order on self-report physical activity in a population-based health interview survey. Four samples of each 1000 adults were drawn at random from the National Person......Adequate information about physical activity habits is essential for surveillance, implementing, and evaluating public health initiatives in this area. Previous studies have shown that question order and differences in wording result in systematic differences in people's responses to questionnaires...... Register. A new question about physical activity was included with minor differences in formulations in samples 1–3. Furthermore, the question in sample 2 was included in sample 4 but was placed in the end of the questionnaire. The mean time spent on moderate physical activity varied between the four...

  19. Question-asking behavior as a form of cognitive activity

    Directory of Open Access Journals (Sweden)

    Elvira A. Baranova

    2017-03-01

    Full Text Available Children’s questions are an indicator of active cognitive perception of reality. Questions but not answers are relevant in revealing a child’s mental life, consciousness and thinking. The lack of question-asking skills can hinder learning, searching and exploration in children. To determine in 7- and 8-year-old school children the common and variable peculiarities of designing a search process for necessary information concerning an unknown object by volitionally formulated questions, as well as the dynamics of the questioning process throughout a school year. The study was based on an experimental methodology, codenamed Guess what there is in the box, and was conducted in four schools in Cheboksary. The sample comprised 158 primary school first-graders who took part in a confirmatory experiment twice, once in September and once in May. The research showed that 96.3% of the questions asked were search questions. Only 30% of the first-graders initiated their searching activities of their own will without having to resort to the given search algorithm, while 70% did not begin asking questions without outside stimulation. The analysis of the dynamics of children’s question-asking behavior exhibited a tendency to decrease in a number of questions asked over the course of the school year. Primary school children need psychological and pedagogical scaffolding aimed at developing a question-asking behavior as a form of cognitive activity to achieve a possible age potential in development.

  20. An evaluation of the quality of statistical design and analysis of published medical research: results from a systematic survey of general orthopaedic journals.

    Science.gov (United States)

    Parsons, Nick R; Price, Charlotte L; Hiskens, Richard; Achten, Juul; Costa, Matthew L

    2012-04-25

    The application of statistics in reported research in trauma and orthopaedic surgery has become ever more important and complex. Despite the extensive use of statistical analysis, it is still a subject which is often not conceptually well understood, resulting in clear methodological flaws and inadequate reporting in many papers. A detailed statistical survey sampled 100 representative orthopaedic papers using a validated questionnaire that assessed the quality of the trial design and statistical analysis methods. The survey found evidence of failings in study design, statistical methodology and presentation of the results. Overall, in 17% (95% confidence interval; 10-26%) of the studies investigated the conclusions were not clearly justified by the results, in 39% (30-49%) of studies a different analysis should have been undertaken and in 17% (10-26%) a different analysis could have made a difference to the overall conclusions. It is only by an improved dialogue between statistician, clinician, reviewer and journal editor that the failings in design methodology and analysis highlighted by this survey can be addressed.