Modular transportation system with a three dimensional routeing
Directory of Open Access Journals (Sweden)
Löffler Christoph
2015-12-01
Full Text Available In intra-enterprise logistics and automation of manufacturing processes general a rising productivity by high flexibility is required. Existing transportation systems exclusively use two-dimensional track sections, because they can be served with standard drives. Because of these simple structures the transport speed is limited and thereby also the throughput. In this paper now a modular transportation system is presented which could reach higher speeds with a direct drive and the use of centrifugal force compensating curves. Simultaneously the system also can change the altitude. All this succeeds with the integration of three-dimensional track sections. Therefore a two piped guiding system with a long stator linear motor was designed. To combine the linear motor with the three dimensional track special stator elements were developed which allow a bending of the stator to follow the route course. The current work deals with the implementation of a mechanical passive switch, which is operated by the electromagnetic forces of the linear motor. So no additional mechanical actors or a separate electromagnetic system are necessary.
Three-dimensional survey of paint layer
Pampaloni, Enrico; Bellucci, Roberto; Carcagni, Pierluigi; Casaccia, Antonella; Fontana, Raffaella; Gambino, Maria Chiara; Piccolo, Roberta; Pingi, Paolo; Pezzati, Luca
2007-07-01
The quantitative morphological analysis of a painting surface allows to evidence form defects and to study, thus, their influence on the stability of the paint and preparatory layers, as well as of the support. Therefore a three-dimensional survey can be very useful in planning the restoration intervention of a painting. In this work we present the results of the surface analysis carried out on the painting "Ultima Cena" by Giorgio Vasari. This panel painting is severely affected by paint film wrinkling produced as a consequence of the flood that occurred in Florence in 1966. Our analysis, accomplished to quantify the lengthening of the paint layer with respect to the one of the support in order to plan the restoration intervention, was performed on 25 profiles separated each by 10 cm in order to cover the whole painting surface. A data analysis, based on morphological filtering named "Rolling Ball" transformation, was used to evaluate the length difference between the paint layer and the panel support along each profile.
Power Spectrum Analysis of Three-Dimensional Redshift Surveys
Feldman, H A; Peacock, J A; Feldman, Hume A.; Kaiser, Nick; Peacock, John A.
1994-01-01
We develop a general method for power spectrum analysis of three dimensional redshift surveys. We present rigorous analytical estimates for the statistical uncertainty in the power and we are able to derive a rigorous optimal weighting scheme under the reasonable (and largely empirically verified) assumption that the long wavelength Fourier components are Gaussian distributed. We apply the formalism to the updated 1-in-6 QDOT IRAS redshift survey, and compare our results to data from other probes: APM angular correlations; the CfA and the Berkeley 1.2Jy IRAS redshift surveys. Our results bear out and further quantify the impression from e.g.\\ counts-in-cells analysis that there is extra power on large scales as compared to the standard CDM model with $\\Omega h\\simeq 0.5$. We apply likelihood analysis using the CDM spectrum with $\\Omega h$ as a free parameter as a phenomenological family of models; we find the best fitting parameters in redshift space and transform the results to real space. Finally, we calcul...
Three-dimensional ocean sensor networks: A survey
Wang, Yu; Liu, Yingjian; Guo, Zhongwen
2012-12-01
The past decade has seen a growing interest in ocean sensor networks because of their wide applications in marine research, oceanography, ocean monitoring, offshore exploration, and defense or homeland security. Ocean sensor networks are generally formed with various ocean sensors, autonomous underwater vehicles, surface stations, and research vessels. To make ocean sensor network applications viable, efficient communication among all devices and components is crucial. Due to the unique characteristics of underwater acoustic channels and the complex deployment environment in three dimensional (3D) ocean spaces, new efficient and reliable communication and networking protocols are needed in design of ocean sensor networks. In this paper, we aim to provide an overview of the most recent advances in network design principles for 3D ocean sensor networks, with focuses on deployment, localization, topology design, and position-based routing in 3D ocean spaces.
Three-Dimensional Ocean Sensor Networks: A Survey
Institute of Scientific and Technical Information of China (English)
WANG Yu; LIU Yingjian; GUO Zhongwen
2012-01-01
The past decade has seen a growing interest in ocean sensor networks because of their wide applications in marine research,oceanography,ocean monitoring,offshore exploration,and defense or homeland security.Ocean sensor networks are generally formed with various ocean sensors,autonomous underwater vehicles,surface stations,and research vessels.To make ocean sensor network applications viable,efficient communication among all devices and components is crucial.Due to the unique characteristics of underwater acoustic channels and the complex deployment environment in three dimensional (3D) ocean spaces,new efficient and reliable communication and networking protocols are needed in design of ocean sensor networks.In this paper,we aim to provide an overview of the most recent advances in network design principles for 3D ocean sensor networks,with focuses on deployment,localization,topology design,and position-based routing in 3D ocean spaces.
Methods for Setting up a Three-Dimensional Industrial Surveying System of "Building Blocks Type"
Institute of Scientific and Technical Information of China (English)
FENG Wenhao
2004-01-01
This paper is to advance some relevant techniques to set up a three-dimensional industrial surveying system of "building blocks type", making use of the electronic theodolite, standard ruler and portable computer.
Institute of Scientific and Technical Information of China (English)
DING Wan; WU Jianxu; YAO Yan’an
2015-01-01
Lattice modular robots possess diversity actuation methods, such as electric telescopic rod, gear rack, magnet, robot arm, etc. The researches on lattice modular robots mainly focus on their hardware descriptions and reconfiguration algorithms. Meanwhile, their design architectures and actuation methods perform slow telescopic and moving speeds, relative low actuation force verse weight ratio, and without internal space to carry objects. To improve the mechanical performance and reveal the locomotion and reconfiguration binary essences of the lattice modular robots, a novel cube-shaped, frame-like, pneumatic-based reconfigurable robot module called pneumatic expandable cube(PE-Cube) is proposed. The three-dimensional(3D) expanding construction and omni-directional rolling analysis of the constructed robots are the main focuses. The PE-Cube with three degrees of freedom(DoFs) is assembled by replacing the twelve edges of a cube with pneumatic cylinders. The proposed symmetric construction condition makes the constructed robots possess the same properties in each supporting state, and a binary control strategy cooperated with binary actuator(pneumatic cylinder) is directly adopted to control the PE-Cube. Taking an eight PE-Cube modules’ construction as example, its dynamic rolling simulation, static rolling condition, and turning gait are illustrated and discussed. To testify telescopic synchronization, respond speed, locomotion feasibility, and repeatability and reliability of hardware system, an experimental pneumatic-based robotic system is built and the rolling and turning experiments of the eight PE-Cube modules’ construction are carried out. As an extension, the locomotion feasibility of a thirty-two PE-Cube modules’ construction is analyzed and proved, including dynamic rolling simulation, static rolling condition, and dynamic analysis in free tipping process. The proposed PE-Cube module, construction method, and locomotion analysis enrich the family of
Modularity and three-dimensional isostructurality of novel synthons in sulfonamide–lactam cocrystals
Directory of Open Access Journals (Sweden)
Geetha Bolla
2015-07-01
Full Text Available The design of novel supramolecular synthons for functional groups relevant to drugs is an essential prerequisite for applying crystal engineering in the development of novel pharmaceutical cocrystals. It has been convincingly shown over the past decade that molecular level control and modulation can influence the physicochemical properties of drug cocrystals. Whereas considerable advances have been reported on the design of cocrystals for carboxylic acids and carboxamide functional groups, the sulfonamide group, which is a cornerstone of sulfa drugs, is relatively unexplored for reproducible heterosynthon-directed crystal engineering. The occurrence of synthons and isostructurality in sulfonamide–lactam cocrystals (SO2NH2...CONH hydrogen bonding is analyzed to define a strategy for amide-type GRAS (generally recognized as safe coformers with sulfonamides. Three types of supramolecular synthons are identified for the N—H donor of sulfonamide hydrogen bonding to the C=O acceptor of amide. Synthon 1: catemer synthon C21(4 chain motif, synthon 2: dimer–cyclic ring synthon R22(8R42(8 motifs, and synthon 3: dimer–catemer synthon of R22(8C11(4D notation. These heterosynthons of the cocrystals observed in this study are compared with the N—H...O dimer R22(8 ring and C(4 chain motifs of the individual sulfonamide structures. The X-ray crystal structures of sulfonamide–lactam cocrystals exhibit interesting isostructurality trends with the same synthon being present. One-dimensional, two-dimensional and three-dimensional isostructurality in crystal structures is associated with isosynthons and due to their recurrence, novel heterosynthons for sulfonamide cocrystals are added to the crystal engineer's toolkit. With the predominance of sulfa drugs in medicine, these new synthons provide rational strategies for the design of binary and potentially ternary cocrystals of sulfonamides.
Energy Technology Data Exchange (ETDEWEB)
In, W. K.; Lee, S. W.; Lim, H. S.; Lee, W. J. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
2006-07-01
High temperature gas-cooled reactors(HTGR) have been reviewed as potential sources for future energy needs, particularly for a hydrogen production. Among the HTGRs, the pebble bed reactor(PBR) and a prismatic modular reactor(PMR) are considered as the nuclear heat source in Korea's nuclear hydrogen development and demonstration project. PBR uses coated fuel particles embedded in spherical graphite fuel pebbles. The fuel pebbles flow down through the core during an operation. PMR uses graphite fuel blocks which contain cylindrical fuel compacts consisting of the fuel particles. The fuel blocks also contain coolant passages and locations for absorber and control material. The maximum fuel temperature in the core hot spot is one of the important design parameters for both a PBR and a PMR. The objective of this study is to predict the hot-spot fuel temperature distributions in a PBR and a PMR at a steady state. The computational fluid dynamics(CFD) code, CFX-10 is used to perform the three-dimensional analysis. The latest design data was used here based on the reference reactor designs, PBMR400 and GTMHR60.
Three-dimensional resistivity modeling of GREATEM survey data from Ontake Volcano, northwest Japan
Abd Allah, Sabry; Mogi, Toru
2016-05-01
Ontake Volcano is located in central Japan, 200 km northwest of Tokyo and erupted on September 27, 2014. To study the structure of Ontake Volcano and discuss the process of its phreatic eruption, which can help in future eruptions mitigation, airborne electromagnetic (AEM) surveys using the grounded electrical-source airborne transient electromagnetic (GREATEM) system were conducted over Ontake Volcano. Field measurements and data analysis were done by OYO Company under the Sabo project managed by the Ministry of Land, Infrastructure, Transport and Tourism. Processed data and 1D resistivity models were provided by this project. We performed numerical forward modeling to generate a three-dimensional (3D) resistivity structure model that fits the GREATEM data where a composite of 1D resistivity models was used as the starting model. A 3D electromagnetic forward-modeling scheme based on a staggered-grid finite-difference method was modified and used to calculate the response of the 3D resistivity model along each survey line. We verified the model by examining the fit of magnetic-transient responses between the field data and 3D forward-model computed data. The preferred 3D resistivity models show that a moderately resistive structure (30-200 Ω m) is characteristic of most of the volcano, and were able to delineate a hydrothermal zone within the volcanic edifice. This hydrothermal zone may be caused by a previous large sector collapse.
Three-dimensional dynamic topographic survey of granular flows using photogrammetric techniques
Dallavalle, D.; Scotton, P.; Tecca, P. R.
2012-04-01
In order to better characterize the behavior of fast dry granular mass movements, such as dense snow or rock avalanches, laboratory analyses have been undertaken in a model scale (Froude similarity, geometrical scale of the order of 50:1 - 100:1). To this end, an experimental flume, consisting of two planes with adjustable inclination, has been used: the upstream plane, with slope varying from 15% to 60%, simulates the flowing zone and the downstream plane, with slopes ranging from 0% to 30%, simulates the deposition zone. The experimental apparatus has been completed in order to obtain a three-dimensional dynamic topographic survey of the sliding free surface, using photogrammetric techniques. The experiments are being performed using a maximum of eight industrial digital video-cameras. A full photogrammetric camera calibration process has been first conducted in order to define the parameters of inner orientation of the cameras and of the objective lenses distortion, in order to reduce the uncertainties in the collinearity equations. The recording time is digitally triggered at the same time to all the cameras. A dedicated acquisition code, based on LabView software, has been realized to achieve the best accuracy in the frames synchronization. The surface is reconstructed, at different times, using the frames taken at the same instant from the different video-cameras. The photogrammetric analysis has being performed by means of commercial dedicated software. As a final product of the research it is expected the tuning of an automatic procedure for the photogrammetric analysis of the series of frames taken in order to describe the dynamic evolution of the motion of a granular mass driven by the gravity and the limits of the proposed techniques. The dynamic three-dimensional reconstruction of the free surface of the sliding granular mass will be used in the calibration process of granular mathematical-numerical models. The comprehension and the estimation of the
Directory of Open Access Journals (Sweden)
Solimini Angelo G
2012-09-01
Full Text Available Abstract Background The increasing popularity of commercial movies showing three dimensional (3D computer generated images has raised concern about image safety and possible side effects on population health. This study aims to (1 quantify the occurrence of visually induced symptoms suffered by the spectators during and after viewing a commercial 3D movie and (2 to assess individual and environmental factors associated to those symptoms. Methods A cross-sectional survey was carried out using a paper based, self administered questionnaire. The questionnaire includes individual and movie characteristics and selected visually induced symptoms (tired eyes, double vision, headache, dizziness, nausea and palpitations. Symptoms were queried at 3 different times: during, right after and after 2 hours from the movie. Results We collected 953 questionnaires. In our sample, 539 (60.4% individuals reported 1 or more symptoms during the movie, 392 (43.2% right after and 139 (15.3% at 2 hours from the movie. The most frequently reported symptoms were tired eyes (during the movie by 34.8%, right after by 24.0%, after 2 hours by 5.7% of individuals and headache (during the movie by 13.7%, right after by 16.8%, after 2 hours by 8.3% of individuals. Individual history for frequent headache was associated with tired eyes (OR = 1.34, 95%CI = 1.01-1.79, double vision (OR = 1.96; 95%CI = 1.13-3.41, headache (OR = 2.09; 95%CI = 1.41-3.10 during the movie and of headache after the movie (OR = 1.64; 95%CI = 1.16-2.32. Individual susceptibility to car sickness, dizziness, anxiety level, movie show time, animation 3D movie were also associated to several other symptoms. Conclusions The high occurrence of visually induced symptoms resulting from this survey suggests the need of raising public awareness on possible discomfort that susceptible individuals may suffer during and after the vision of 3D movies.
Institute of Scientific and Technical Information of China (English)
Huang Runqiu; Dong Xiujun
2008-01-01
The appearance of 3D laser scanning technology is one of the most important technology revolutions in surveying and mapping field. It can be widely used in many interrelated fields, such as engineering constructions and 3D measurements, owing to its prominent characteristics of the high efficiency and high precision. At present its application is still in the initial state, and it is quite rarely used in China, especially in geotechnical engineering and geological engineering fields. Starting with a general introduction of 3D laser scanning technology, this article studies how to apply the technology to high rock slope investigations. By way of a case study, principles and methods of quick slope documentation and occurrence measurement of discontinuities are discussed and analyzed. Analysis results show that the application of 3D laser scanning technology to geotechnical and geological engineering has a great prospect and value.
U.S. Geological Survey: A synopsis of Three-dimensional Modeling
Jacobsen, Linda J.; Glynn, Pierre D.; Phelps, Geoff A.; Orndorff, Randall C.; Bawden, Gerald W.; Grauch, V.J.S.
2011-01-01
The U.S. Geological Survey (USGS) is a multidisciplinary agency that provides assessments of natural resources (geological, hydrological, biological), the disturbances that affect those resources, and the disturbances that affect the built environment, natural landscapes, and human society. Until now, USGS map products have been generated and distributed primarily as 2-D maps, occasionally providing cross sections or overlays, but rarely allowing the ability to characterize and understand 3-D systems, how they change over time (4-D), and how they interact. And yet, technological advances in monitoring natural resources and the environment, the ever-increasing diversity of information needed for holistic assessments, and the intrinsic 3-D/4-D nature of the information obtained increases our need to generate, verify, analyze, interpret, confirm, store, and distribute its scientific information and products using 3-D/4-D visualization, analysis, modeling tools, and information frameworks. Today, USGS scientists use 3-D/4-D tools to (1) visualize and interpret geological information, (2) verify the data, and (3) verify their interpretations and models. 3-D/4-D visualization can be a powerful quality control tool in the analysis of large, multidimensional data sets. USGS scientists use 3-D/4-D technology for 3-D surface (i.e., 2.5-D) visualization as well as for 3-D volumetric analyses. Examples of geological mapping in 3-D include characterization of the subsurface for resource assessments, such as aquifer characterization in the central United States, and for input into process models, such as seismic hazards in the western United States.
Iwata, M.; Mogi, T.; Okuma, S.; Nakatsuka, T.
2016-12-01
Tokachidake Volcano, central Hokkaido, Japan erupted in 1926, 1962 and 1988-1989 in the 20th century from the central part. In recent years, expansions of the edifice of the volcano at shallow depth and increases of the volcanic smoke in the Taisho crater were observed (Meteorological Agency of Japan, 2014). Magnetic changes were observed at the 62-2 crater by repeated magnetic measurements in 2008-2009, implying a demagnetization beneath the crater (Hashimoto at al., 2010). Moreover, a very low resistivity part was found right under the 62-2 crater from an AMT survey (Yamaya et al., 2010). However, since the station numbers of the survey are limited, the area coverage is not sufficient. In this study, we have re-analyzed high-resolution aeromagnetic data to delineate the three-dimensional magnetic structure of the volcano to understand the nature of other craters.A low altitude airborne magnetic survey was conducted in 2014 mainly over the active areas of the volcano by the Ministry of Land, Infrastructure, Transport and Tourism to manage land slide risk in the volcano. The survey was flown at an altitude of 60 m above ground by a helicopter with a Cesium magnetometer in the towed-bird 30m below the helicopter. The low altitude survey enables us to delineate the detailed magnetic structure. We calculated magnetic anomaly distribution on a smooth surface assuming equivalent anomalies below the observation surface. Then the 3D magnetic imaging method (Nakatsuka and Okuma, 2014) was applied to the magnetic anomalies to reveal the three-dimensional magnetic structure.As a result, magnetization highs were seen beneath the Ground crater, Suribachi crater and Kitamuki crater. This implies that magmatic activity occurred in the past at these craters. These magma should have already solidified and acquired strong remanent magnetization. Relative magnetization lows were seen beneath the 62-2 crater and the Taisho crater where fumarolic activity is active. However a
Poisson Manifolds, Lie Algebroids, Modular Classes: a Survey
Directory of Open Access Journals (Sweden)
Yvette Kosmann-Schwarzbach
2008-01-01
Full Text Available After a brief summary of the main properties of Poisson manifolds and Lie algebroids in general, we survey recent work on the modular classes of Poisson and twisted Poisson manifolds, of Lie algebroids with a Poisson or twisted Poisson structure, and of Poisson-Nijenhuis manifolds. A review of the spinor approach to the modular class concludes the paper.
Survey on research and development of reconfigurable modular robots
Directory of Open Access Journals (Sweden)
Jinguo Liu
2016-08-01
Full Text Available This article presents a comprehensive survey of reconfigurable modular robots, which covers the origin, history, the state of the art, key technologies, challenges, and applications of reconfigurable modular robots. An elaborative classification of typical reconfigurable modular robots is proposed based on the characteristics of the modules and the reconfiguration mechanism. As the system characteristics of reconfigurable modular robots are mainly dependent on the functions of modules, the mechanical and electrical design features of modules of typical reconfigurable modular robots are discussed in detail. Furthermore, an in-depth comparison analysis is conducted, which encompasses discussions of module shape, module degrees of freedom, module attribute, connection mechanisms, interface autonomy, locomotion modes, and workspace. Meanwhile, many reconfigurable modular robot researches focus on the study of self-X capabilities (i.e. self-reconfiguration, self-assembly, self-adaption, etc., which embodies autonomy performance of reconfigurable modular robots in certain extent. An evolutionary cobweb evaluation model is proposed in this article to evaluate the autonomy level of reconfigurable modular robots. Although various reconfigurable modular robots have been developed and some of them have been put into practical applications such as search and rescue missions, there still exist many open theoretical, technical, and practical challenges in this field. This work is hopefully to offer a reference for the further developments of reconfigurable modular robots.
Institute of Scientific and Technical Information of China (English)
吕伟娅; 陈吉
2012-01-01
In this paper,three test rooms having same environment conditions were taken as the study objects,and the energy-saving effects of modular three-dimensional greening were analyzed. The results indicated that the rooms with three-dimensional greening and roof greening had obvious insulation effects when compared with the room without these greening strategies. The corresponding temperatures of external wall surface, inner wall surface, indoor air could be lowered up to 21. 6 ℃ ,5.7 ℃ and 5. 2 ℃ , respectively. In addition,the air conditioner's energy consumption of the rooms with three-dimensional greening and roof greening could be saved by 39. 97% and 11. 04% .respectively.%本文以3栋环境条件基本相同的试验用房为研究对象,开展了模块式立体绿化节能效果试验研究.结果表明:在夏季,立体绿化建筑、屋顶绿化建筑和裸建筑相比较隔热效果明显；立体绿化建筑的墙体外表面温度、内表面温度和室内空气温度与裸建筑相比最多可降低21.6、5.7和5.2℃；立体绿化建筑和屋顶绿化建筑的空调节电率分别为39.97％和11.04％.
Energy Technology Data Exchange (ETDEWEB)
Minehara, M.; Nakagami, K.; Tanaka, H. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center
1996-10-01
Theory of parameter setting for data acquisition is arranged, mainly as to the seismic generating and receiving geometry. This paper also introduces an example of survey planning for three-dimensional land seismic exploration in progress. For the design of data acquisition, fundamental parameters are firstly determined on the basis of the characteristics of reflection records at a given district, and then, the layout of survey is determined. In this study, information through modeling based on the existing interpretation of geologic structures is also utilized, to reflect them for survey specifications. Land three-dimensional seismic survey was designed. Ground surface of the surveyed area consists of rice fields and hilly regions. The target was a nose-shaped structure in the depth about 2,500 m underground. A survey area of 4km{times}5km was set. Records in the shallow layers could not obtained when near offset was not ensured. Quality control of this distribution was important for grasping the shallow structure required. In this survey, the seismic generating point could be ensured more certainly than initially expected, which resulted in the sufficient security of near offset. 2 refs., 2 figs.
Three dimensional strained semiconductors
Energy Technology Data Exchange (ETDEWEB)
Voss, Lars; Conway, Adam; Nikolic, Rebecca J.; Leao, Cedric Rocha; Shao, Qinghui
2016-11-08
In one embodiment, an apparatus includes a three dimensional structure comprising a semiconductor material, and at least one thin film in contact with at least one exterior surface of the three dimensional structure for inducing a strain in the structure, the thin film being characterized as providing at least one of: an induced strain of at least 0.05%, and an induced strain in at least 5% of a volume of the three dimensional structure. In another embodiment, a method includes forming a three dimensional structure comprising a semiconductor material, and depositing at least one thin film on at least one surface of the three dimensional structure for inducing a strain in the structure, the thin film being characterized as providing at least one of: an induced strain of at least 0.05%, and an induced strain in at least 5% of a volume of the structure.
Directory of Open Access Journals (Sweden)
Zaira Peinado Checa
2014-05-01
Full Text Available Nowadays, one of the most used methods for the architectural survey is photogrammetry. The combination of terrestrial and aerial photogrammetry of low altitude is the ideal method for obtaining global geometric documentation of any building, as it collects information about concealed or inaccessible points. The UAV or drone is the device currently most used to capture aerial photographs. We used the example of the Church of San Miguel in Agreda to establish a methodology for data collection and the process for obtaining a textured three-dimensional model.
Three-dimensional photovoltaics
Myers, Bryan; Bernardi, Marco; Grossman, Jeffrey C.
2010-03-01
The concept of three-dimensional (3D) photovoltaics is explored computationally using a genetic algorithm to optimize the energy production in a day for arbitrarily shaped 3D solar cells confined to a given area footprint and total volume. Our simulations demonstrate that the performance of 3D photovoltaic structures scales linearly with height, leading to volumetric energy conversion, and provides power fairly evenly throughout the day. Furthermore, we show that optimal 3D shapes are not simple box-like shapes, and that design attributes such as reflectivity can be optimized in new ways using three-dimensionality.
Mignoli, M.; Zamorani, G.; Scodeggio, M.; Cimatti, A.; Halliday, C.; Lilly, S. J.; Pozzetti, L.; Vergani, D.; Carollo, C. M.; Contini, T.; Le Fevre, O.; Mainieri, V.; Renzini, A.; Bardelli, S.; Bolzonella, M.; Bongiorno, A.; Caputi, K.; Coppa, G.; Cucciati, O.; de la Torre, S.; de Ravel, L.; Franzetti, P.; Garilli, B.; Iovino, A.; Kampczyk, P.; Kneib, J. -P.; Knobel, C.; Kovac, K.; Lamareille, F.; Le Borgne, J. -F.; Le Brun, V.; Maier, C.; Pello, R.; Peng, Y.; Montero, E. Perez; Ricciardelli, E.; Scarlata, C.; Silverman, J. D.; Tanaka, M.; Tasca, L.; Tresse, L.; Zucca, E.; Abbas, U.; Bottini, D.; Capak, P.; Cappi, A.; Cassata, P.; Fumana, M.; Guzzo, L.; Leauthaud, A.; Maccagni, D.; Marinoni, C.; McCracken, H. J.; Memeo, P.; Meneux, B.; Oesch, P.; Porciani, C.; Scaramella, R.; Scoville, N.
2009-01-01
Aims: We investigate the relationships between three main optical galaxy observables (spectral properties, colors, and morphology), exploiting the data set provided by the COSMOS/zCOSMOS survey. The purpose of this paper is to define a simple galaxy classification cube, with a carefully selected sam
Mignoli, M; Scodeggio, M; Cimatti, A; Halliday, C; Lilly, S J; Pozzetti, L; Vergani, D; Carollo, C M; Contini, T; Le Fèvre, O; Mainieri, V; Renzini, A; Bardelli, S; Bolzonella, M; Bongiorno, A; Caputi, K; Coppa, G; Cucciati, O; De la Torre, S; de Ravel, L; Franzetti, P; Garilli, B; Iovino, A; Kampczyk, P; Kneib, J -P; Knobel, C; Kovac, K; Lamareille, F; Le Borgne, J F; Le Brun, V; Maier, C; Pellò, R; Peng, Y; Montero, E Perez; Ricciardelli, E; Scarlata, C; Silverman, J D; Tanaka, M; Tasca, L; Tresse, L; Zucca, E; Abbas, U; Bottini, D; Capak, P; Cappi, A; Cassata, P; Fumana, M; Guzzo, L; Leauthaud, A; MacCagni, D; Marinoni, C; McCracken, H J; Memeo, P; Meneux, B; Oesch, P; Porciani, C; Scaramella, R; Scoville, N
2008-01-01
Aims. We investigate the relationships between three main optical galaxy observables (spectral properties, colours, and morphology), exploiting the data set provided by the COSMOS/zCOSMOS survey. The purpose of this paper is to define a simple galaxy classification cube, using a carefully selected sample of around 1000 galaxies. Methods. Using medium resolution spectra of the first 1k zCOSMOS-bright sample, optical photometry from the Subaru/COSMOS observations, and morphological measurements derived from ACS imaging, we analyze the properties of the galaxy population out to z~1. Applying three straightforward classification schemes (spectral, photometric, and morphological), we identify two main galaxy types, which appear to be linked to the bimodality of galaxy population. The three parametric classifications constitute the axes of a "classification cube". Results. A very good agreement exists between the classification from spectral data (quiescent/star-forming galaxies) and that based on colours (red/blue...
Three-dimensional metamaterials
Burckel, David Bruce [Albuquerque, NM
2012-06-12
A fabrication method is capable of creating canonical metamaterial structures arrayed in a three-dimensional geometry. The method uses a membrane suspended over a cavity with predefined pattern as a directional evaporation mask. Metallic and/or dielectric material can be evaporated at high vacuum through the patterned membrane to deposit resonator structures on the interior walls of the cavity, thereby providing a unit cell of micron-scale dimension. The method can produce volumetric metamaterial structures comprising layers of such unit cells of resonator structures.
Three dimensional system integration
Papanikolaou, Antonis; Radojcic, Riko
2010-01-01
Three-dimensional (3D) integrated circuit (IC) stacking is the next big step in electronic system integration. It enables packing more functionality, as well as integration of heterogeneous materials, devices, and signals, in the same space (volume). This results in consumer electronics (e.g., mobile, handheld devices) which can run more powerful applications, such as full-length movies and 3D games, with longer battery life. This technology is so promising that it is expected to be a mainstream technology a few years from now, less than 10-15 years from its original conception. To achieve thi
Directory of Open Access Journals (Sweden)
Donatas Kaminskas
2015-02-01
Full Text Available Reefs and a barrier reef have been newly identified and mapped by three-dimensional (3D seismic survey in Lithuania. Seismic data analysis has allowed the size and geometry of these reefs to be determined. The largest reefs occur at Pavasaris and South Bliudziai. They have a similar shape and are about 1.5 km long and 1 km wide. A circle-shaped smaller patch reef at North Bliudziai is 1 km in diameter. The overall heights of the studied structures do not exceed 30–40 m. The reefs consist of coarse-grained bioclastic stromatoporoid limestone. A barrier reef rising structurally from SW to NE was established in the west of the mapped area. The stratigraphic position (early Minija Regional Stage and lateral distribution of the barrier reef suggest it started to form earlier than the group of patch reefs. The development of patch reefs was related to the transgression of the Silurian Baltic basin.
Three-Dimensional Complex Variables
Martin, E. Dale
1988-01-01
Report presents new theory of analytic functions of three-dimensional complex variables. While three-dimensional system subject to more limitations and more difficult to use than the two-dimensional system, useful in analysis of three-dimensional fluid flows, electrostatic potentials, and other phenomena involving harmonic functions.
Three-dimensional echocardiography
Energy Technology Data Exchange (ETDEWEB)
Buck, Thomas [University Hospital Essen (Germany). West German Heart Center; Franke, Andreas [Klinikum Region Hannover - Klinikum Siloah, Hannover (Germany). Dept. of Cardiology, Angiology and Intensive Care Medicine; Monaghan, Mark J. (eds.) [King' s College Hospital, London (United Kingdom)
2011-07-01
Presents tips and tricks for beginners and experts Provides educational material for 3D training courses Features comprehensively illustrated cases Includes an accompanying DVD with video clips of all sample cases Three-dimensional echocardiography is the most recent fundamental advancement in echocardiography. Since real-time 3D echocardiography became commercially available in 2002, it has rapidly been accepted in echo labs worldwide. This book covers all clinically relevant aspects of this fascinating new technology, including a comprehensive explanation of its basic principles, practical aspects of clinical application, and detailed descriptions of specific uses in the broad spectrum of clinically important heart disease. The book was written by a group of well-recognized international experts in the field, who have not only been involved in the scientific and clinical evolution of 3D echocardiography since its inception but are also intensively involved in expert training courses. As a result, the clear focus of this book is on the practical application of 3D echocardiography in daily clinical routine with tips and tricks for both beginners and experts, accompanied by more than 150 case examples comprehensively illustrated in more than 800 images and more than 500 videos provided on a DVD. In addition to an in-depth review of the most recent literature on real-time 3D echocardiography, this book represents an invaluable reference work for beginners and expert users of 3D echocardiography. - Tips and tricks for beginners and experts - Educational material for 3D training courses - Comprehensively illustrated cases - DVD with video clips of all sample cases.
Bass, Aaron Stuard
This study examined various practical and theoretical aspects of disturbance in a coastal wetland marsh in southern Louisiana. A literature review approached disturbance ecology from both practical and theoretical perspectives and assessed its applicability to developing broad predictive models. However, specific knowledge of environmental variables, competitive relationships, and the interactive effects of multiple disturbances are required for meaningful usage of these models. The Lacassine National Wildlife Refuge (LNWR) proved to be an ideal laboratory to test various aspects of ecological disturbance theory. I found that the primary disturbances affecting the LNWR have been hurricanes, droughts, water-level manipulations, prescribed burning, oil and gas recovery activities, grazing by Myocastor coypus (nutria), and managed cattle grazing. The 1990's application of three-dimensional (3-D) seismic technology used in the oil and gas recovery business challenged landowners, government regulators, and industry to develop ways to recover these resources without damaging surface features. I developed a conservative estimate that an area exceeding 2.5 times the area of Louisiana's coastal wetlands was covered by overlapping seismic surveys in southern Louisiana from 1997 through 2002, equal to 22.5 km2/year. I provided a general overview of 3-D seismic survey programs, potential adverse impacts, and management and restoration strategies. I also conducted a field study at the LNWR on vegetation in control and treatment transects before, and for two years after, a 3-D survey. I found vegetative cover and the amount of dead plant biomass were significantly lower in treatment plots, but live biomass was not different in treatment and control plots. Species richness was higher in treatment plots compared to control plots, but the live biomass and cover of the dominant species ( Panicum hemitomon) was lower. The live biomass and cover of Eleocharis spp., a colonizing
Three dimensional Dirac semimetals
Zaheer, Saad
We extend the physics of graphene to three dimensional systems by showing that Dirac points can exist on the Fermi surface of realistic materials in three dimensions. Many of the exotic electronic properties of graphene can be ascribed to the pseudorelativistic behavior of its charge carriers due to two dimensional Dirac points on the Fermi surface. We show that certain nonsymmorphic spacegroups exhibit Dirac points among the irreducible representations of the appropriate little group at high symmetry points on the surface of the Brillouin zone. We provide a list of all Brillouin zone momenta in the 230 spacegroups that can host Dirac points. We describe microscopic considerations necessary to design materials in one of the candidate spacegroups such that the Dirac point appears at the Fermi energy without any additional non-Dirac-like Fermi pockets. We use density functional theory based methods to propose six new Dirac semimetals: BiO 2 and SbO2 in the beta-cristobalite lattice (spacegroup 227), and BiCaSiO4, BiMgSiO4, BiAlInO 4, and BiZnSiO4 in the distorted spinels lattice (spacegroup 74). Additionally we derive effective Dirac Hamiltonians given group representative operators as well as tight binding models incorporating spin-orbit coupling. Finally we study the Fermi surface of zincblende (spacegroup 216) HgTe which is effectively point-like at Gamma in the Brillouin zone and exhibits accidental degeneracies along a threefold rotation axis. Whereas compressive strain gaps the band structure into a topological insulator, tensile strain shifts the accidental degeneracies away from Gamma and enlarges the Fermi surface. States on the Fermi surface exhibit nontrivial spin texture marked by winding of spins around the threefold rotation axis and by spin vortices indicating a change in the winding number. This is confirmed by microscopic calculations performed in tensile strained HgTe and Hg0.5Zn 0.5 Te as well as k.p theory. We conclude with a summary of recent
Three-dimensional ultrasound scanning.
Fenster, Aaron; Parraga, Grace; Bax, Jeff
2011-08-06
The past two decades have witnessed developments of new imaging techniques that provide three-dimensional images about the interior of the human body in a manner never before available. Ultrasound (US) imaging is an important cost-effective technique used routinely in the management of a number of diseases. However, two-dimensional viewing of three-dimensional anatomy, using conventional two-dimensional US, limits our ability to quantify and visualize the anatomy and guide therapy, because multiple two-dimensional images must be integrated mentally. This practice is inefficient, and may lead to variability and incorrect diagnoses. Investigators and companies have addressed these limitations by developing three-dimensional US techniques. Thus, in this paper, we review the various techniques that are in current use in three-dimensional US imaging systems, with a particular emphasis placed on the geometric accuracy of the generation of three-dimensional images. The principles involved in three-dimensional US imaging are then illustrated with a diagnostic and an interventional application: (i) three-dimensional carotid US imaging for quantification and monitoring of carotid atherosclerosis and (ii) three-dimensional US-guided prostate biopsy.
三维片上网络拓扑结构研究综述%Survey on Topologies of Three-Dimensional Network on Chip
Institute of Scientific and Technical Information of China (English)
张大坤; 宋国治; 王莲莲; 黄翠
2015-01-01
Three-dimensional network on chip (3D NoC) is developed based on three-dimensional integrated circuit (3D IC), system on chip (SoC) and two-dimensional network on chip (2D NoC). 3D NoC is mainly used to solve the problems such as communication bottleneck of highly integrated chips. It has attracted great attention from both aca-demia and industry at home and abroad. 3D NoC topology structure reflects the layout and connectivity of communi-cations node in the chip, which is crucial for the performance of 3D chip. This paper introduces 2D NoC, the evolu-tion from 2D NoC to 3D NoC, the advantages and problems of adopting 3D NoC and the key technical issues which can be solved by 3D NoC, and analyzes the overall development of 3D NoC. 3D topology is one of the key prob-lems in the design of 3D NoC. This paper mainly studies the different classification methods for 3D NoC topology and divides 3D NoC topologies into 9 categories in terms of communication, then gives a thorough study of 3D NoC topology structures with comparison and analysis of the characteristics for each topology structure. Finally, this paper indicates the possible future research development of 3D NoC topology.%三维片上网络（three-dimensional network on chip ，3D NoC）是在三维集成电路（three-dimensional integrated circuit，3D IC）、片上系统（system on chip，SoC）和二维片上网络（two-dimensional network on chip，2D NoC）的基础上发展起来的，主要解决高集成度芯片通信瓶颈等问题，已引起国内外学术界和产业界的高度重视。3D NoC拓扑结构体现了通信节点在芯片中的布局与连接，对三维芯片性能起决定性作用。简介了2D NoC、2D NoC到3D NoC的演变、3D NoC的优点与存在的问题以及3D NoC解决的关键技术问题，分析了3D NoC总体发展状况。三维拓扑结构是3D NoC设计中的关键问题之一，重点研究了3D NoC拓扑结构的分类方法，从通信角度将3D No
三维激光扫描技术在海岸线测绘中的应用%APPLICATION OF THREE-DIMENSIONAL LASER SCANNING TECHNOLOGY IN COASTLINE SURVEYING
Institute of Scientific and Technical Information of China (English)
李杰; 孙楠楠; 唐秋华; 刘森波; 周兴华
2012-01-01
Three-dimensional laser scanning technology for coastline surveying is studied in this paper. The application of this technology can solve the problems in areas where coastlines are difficult for people to distinguish or reach in traditional coastline surveying, therefore greatly improve accuracy and integrity of coastline surveying and mapping. In this paper, three-dimensional laser point cloud data are collected to build a high-precision digital elevation model and extract the coastline. The precision of the coastline model can meet the requirements in practical work. The operational efficiency and measurement accuracy are also improved Three-dimensional laser scanning technology can be applied to coastline surveying and mapping with broad prospects.%利用三维激光扫描技术对不易施测的海岸带进行激光扫描,可解决传统海岸线测绘中常出现的岸线难以分辨或者难以到达的问题,从而提高海岸线测绘的精确度和完整度.本文通过三维激光扫描技术采集激光点云数据构建高精度的数字高程模型来提取海岸线,并对数据结果进行精度分析比对,可获得符合要求的高精度海岸线和海岸带的三维模型,作业效率与测量精度也得到提高.该项技术完全可以应用于海岸线测绘,具有广阔的前景.
Creating Three-Dimensional Scenes
Krumpe, Norm
2005-01-01
Persistence of Vision Raytracer (POV-Ray), a free computer program for creating photo-realistic, three-dimensional scenes and a link for Mathematica users interested in generating POV-Ray files from within Mathematica, is discussed. POV-Ray has great potential in secondary mathematics classrooms and helps in strengthening students' visualization…
Reilly, Thomas E.; Harbaugh, Arlen W.
1993-01-01
Cylindrical (axisymmetric) flow to a well is an important specialized topic of ground-water hydraulics and has been applied by many investigators to determine aquifer properties and determine heads and flows in the vicinity of the well. A recent modification to the U.S. Geological Survey Modular Three-Dimensional Finite-Difference Ground-Water Flow Model provides the opportunity to simulate axisymmetric flow to a well. The theory involves the conceptualization of a system of concentric shells that are capable of reproducing the large variations in gradient in the vicinity of the well by decreasing their area in the direction of the well. The computer program presented serves as a preprocessor to the U.S. Geological Survey model by creating the input data file needed to implement the axisymmetric conceptualization. Data input requirements to this preprocessor are described, and a comparison with a known analytical solution indicates that the model functions appropriately.
Directory of Open Access Journals (Sweden)
Vincenzo De Novellis
2016-08-01
Full Text Available In this paper, we propose an advanced methodology to perform three-dimensional (3D Finite Element (FE modeling to investigate the kinematical evolution of a slow landslide phenomenon. Our approach benefits from the effective integration of the available geological, geotechnical and satellite datasets to perform an accurate simulation of the landslide process. More specifically, we fully exploit the capability of the advanced Differential Synthetic Aperture Radar Interferometry (DInSAR technique referred to as the Small BAseline Subset (SBAS approach to provide spatially dense surface displacement information. Subsequently, we analyze the physical behavior characterizing the observed landslide phenomenon by means of an inverse analysis based on an optimization procedure. We focus on the Ivancich landslide phenomenon, which affects a residential area outside the historical center of the town of Assisi (Central Italy. Thanks to the large amount of available information, we have selected this area as a representative case study highlighting the capability of advanced 3D FE modeling to perform effective risk analyses of slow landslide processes and accurate urban development planning. In particular, the FE modeling is constrained by using the data from 7 litho-stratigraphic cross-sections and 62 stratigraphic boreholes; and the optimization procedure is carried out using the SBAS-DInSAR retrieved results by processing 39 SAR images collected by the Cosmo-SkyMed (CSK constellation in the 2009–2012 time span. The achieved results allow us to explore the spatial and temporal evolution of the slow-moving phenomenon and via comparison with the geomorphological data, to derive a synoptic view of the kinematical activity of the urban area affected by the Ivancich landslide.
Facial three-dimensional morphometry.
Ferrario, V F; Sforza, C; Poggio, C E; Serrao, G
1996-01-01
Three-dimensional facial morphometry was investigated in a sample of 40 men and 40 women, with a new noninvasive computerized method. Subjects ranged in age between 19 and 32 years, had sound dentitions, and no craniocervical disorders. For each subject, 16 cutaneous facial landmarks were automatically collected by a system consisting of two infrared camera coupled device (CCD) cameras, real time hardware for the recognition of markers, and software for the three-dimensional reconstruction of landmarks' x, y, z coordinates. From these landmarks, 15 linear and 10 angular measurements, and four linear distance ratios were computed and averaged for sex. For all angular values, both samples showed a narrow variability and no significant gender differences were demonstrated. Conversely, all the linear measurements were significantly higher in men than in women. The highest intersample variability was observed for the measurements of facial height (prevalent vertical dimension), and the lowest for the measurements of facial depth (prevalent horizontal dimension). The proportions of upper and lower face height relative to the anterior face height showed a significant sex difference. Mean values were in good agreement with literature data collected with traditional methods. The described method allowed the direct and noninvasive calculation of three-dimensional linear and angular measurements that would be usefully applied in clinics as a supplement to the classic x-ray cephalometric analyses.
A dictionary of modular threefolds
Meyer, Christian
2005-01-01
The thesis deals with the modularity conjecture for three-dimensional Calabi-Yau varieties. This is a generalization of the work of A. Wiles and others on modularity of elliptic curves. Modularity connects the number of points on varieties with coefficients of certain modular forms. In chapter 1 we collect the basics on arithmetic on Calabi-Yau manifolds, including general modularity results and strategies for modularity proofs. In chapters 2, 3, 4 and 5 we investigate exa...
Quasicrystalline three-dimensional foams
Cox, S. J.; Graner, F.; Mosseri, R.; Sadoc, J.-F.
2017-03-01
We present a numerical study of quasiperiodic foams, in which the bubbles are generated as duals of quasiperiodic Frank–Kasper phases. These foams are investigated as potential candidates to the celebrated Kelvin problem for the partition of three-dimensional space with equal volume bubbles and minimal surface area. Interestingly, one of the computed structures falls close to (but still slightly above) the best known Weaire–Phelan periodic candidate. In addition we find a correlation between the normalized bubble surface area and the root mean squared deviation of the number of faces, giving an additional clue to understanding the main geometrical ingredients driving the Kelvin problem.
Van Oosterom, P.J.M.
2014-01-01
This report contains the results of the second phase of the 3D Cadastre and LADM investigations in context of possible future renewal of the Cadastral database at the Survey of Israel. This report sequels the report of phase 1 and complements the presentation given on 17 July 2014 ‘Towards an Israel
Morphological methods for design of modular systems (a survey)
Levin, Mark Sh
2012-01-01
The article addresses morphological approaches to design of modular systems. The following methods are briefly described: (i) basic version of morphological analysis (MA), (ii) modification of MA as method of closeness to ideal point(s), (iii reducing of MA to linear programming, (iv) multiple choice problem, (v) quadratic assignment problem, (vi) Pareto-based MA (i.e., revelation of Pareto-efficient solutions), (vii) Hierarchical Morphological Multicriteria Design (HMMD) approach, and (viii) Hierarchical Morphological Multicriteria Design (HMMD) approach based on fuzzy estimates. The above-mentioned methods are illustrated by schemes, models, and illustrative examples. An additional realistic example (design of GSM network) is presented to illustrate main considered methods.
Three-dimensional display technologies.
Geng, Jason
2013-01-01
The physical world around us is three-dimensional (3D), yet traditional display devices can show only two-dimensional (2D) flat images that lack depth (i.e., the third dimension) information. This fundamental restriction greatly limits our ability to perceive and to understand the complexity of real-world objects. Nearly 50% of the capability of the human brain is devoted to processing visual information [Human Anatomy & Physiology (Pearson, 2012)]. Flat images and 2D displays do not harness the brain's power effectively. With rapid advances in the electronics, optics, laser, and photonics fields, true 3D display technologies are making their way into the marketplace. 3D movies, 3D TV, 3D mobile devices, and 3D games have increasingly demanded true 3D display with no eyeglasses (autostereoscopic). Therefore, it would be very beneficial to readers of this journal to have a systematic review of state-of-the-art 3D display technologies.
Institute of Scientific and Technical Information of China (English)
ZHAO ZhiXin; XU JiRen
2009-01-01
The 3-D crustal structure of P-wave velocity in East China is studied based on the data obtained by wide-angle seismic reflection and refraction surveys.The results suggest that a deep Moho disconti-nuity exists in the western zone of the study region,being 35-48 thick.High-velocity structure zones exist in the upper crust shallower than 20 km beneath the Sulu and Dabie regions.The cause of high-velocity zones is attributable to high-pressure metamorphic (HPM) and ultra-high-pressure metamorphic (UHPM) terranes with high velocity and density exhuming up to the upper crust in the Sulu and Dabie orogenies.Anomalous zones of low velocity are in the lower crust,about 30 km beneath the Sulu and Dabie regions.The Moho discontinuity is as deep as 38 km beneath the Dabie region,deeper than those in the surrounding areas.The Moho discontinuity beneath the Sulu orogenic region is also a little deeper than those in its vicinity,being about 32 km.The deep Moho discontinuity zone implies that the low crustal velocity structure zone is in that region.The low-velocity characteristics in the lower crust are probably related to the remnant crustal root of the old mountains due to the orogeny in the Sulu and Dabie regions.The high-velocity anomalous zones in the upper crust and low-velocity anomalous zones in the lower crust beneath the Sulu region are all located northeast of the northern segment of the Tan-Lu fault.However,the high- and low-velocity anomalous zones beneath the Dabie region are located southwest of the southern segment of the Tan-Lu fault.Such a distribution of the velocity-anomalous zones looks to be attributable a left lateral slip motion along the Tan-Lu fault.The distribution pattern of the velocity-anomalous zones may show some evidence for the left strike-slip motion regime of the Tan-Lu fault.
Kornreich, Philipp; Farell, Bart
2013-01-01
An imager that can measure the distance from each pixel to the point on the object that is in focus at the pixel is described. This is accomplished by short photo-conducting lightguides at each pixel. In the eye the rods and cones are the fiber-like lightguides. The device uses ambient light that is only coherent in spherical shell-shaped light packets of thickness of one coherence length. Modern semiconductor technology permits the construction of lightguides shorter than a coherence length of ambient light. Each of the frequency components of the broad band light arriving at a pixel has a phase proportional to the distance from an object point to its image pixel. Light frequency components in the packet arriving at a pixel through a convex lens add constructively only if the light comes from the object point in focus at this pixel. The light in packets from all other object points cancels. Thus the pixel receives light from one object point only. The lightguide has contacts along its length. The lightguide charge carriers are generated by the light patterns. These light patterns, and thus the photocurrent, shift in response to the phase of the input signal. Thus, the photocurrent is a function of the distance from the pixel to its object point. Applications include autonomous vehicle navigation and robotic vision. Another application is a crude teleportation system consisting of a camera and a three-dimensional printer at a remote location.
Energy Technology Data Exchange (ETDEWEB)
Akasaka, Y.
1986-12-01
VLSI will be reaching to the limit of minimization in the 1990s, and after that, further increase of packing density or functions might depend on the vertical integration technology. Three-dimensional (3-D) integration is expected to provide several advantages, such as 1) parallel processing, 2) high-speed operation, 3) high packing density, and 4) multifunctional operation. Basic technologies of 3-D IC are to fabricate SOI layers and to stack them monolithically. Crystallinity of the recrystallized layer in SOI has increasingly become better, and very recently crystal-axis controlled, defect-free single-crystal areas has been obtained in chip size level by laser recystallization technology. Some basic functional models showing the concept or image of a future 3-D IC were fabricated in two or three stacked active layers. Some other proposals of subsystems in the application of 3-D structure, and the technical issues for realizing practical 3-D IC, i.e., the technology for fabricating high-quality SOI crystal on complicated surface topology, crosstalk of the signals between the stacked layers, total power consumption and cooling of the chip, are also discussed in this paper.
Three-dimensional colloidal lithography.
Nagai, Hironori; Poteet, Austen; Zhang, Xu A; Chang, Chih-Hao
2017-03-24
Light interactions with colloidal particles can generate a variety of complex three-dimensional (3D) intensity patterns, which can be utilized for nanolithography. The study of particle-light interactions can add more types of intensity patterns by manipulating key factors. Here we investigate a novel 3D nanolithography technique using colloidal particles under two-beam coherent illuminations. The fabricated 3D nanostructures are hollow, nested within periodic structures, and possess multiple chamber geometry. The effects of incident angles and particle size on the fabricated nanostructures were examined. The relative phase shift between particle position and interference pattern is identified as another significant parameter influencing the resultant nanostructures. A numerical model has been developed to show the evolution of nanostructure geometry with phase shifts, and experimental studies confirm the simulation results. Through the introduction of single colloidal particles, the fabrication capability of Lloyd's mirror interference can now be extended to fabrication of 3D nanostructure with complex shell geometry. The fabricated hollow nanostructures with grating background could find potential applications in the area of photonics, drug delivery, and nanofluidics.
Three dimensional magnetic abacus memory
Zhang, Shilei; Zhang, Jingyan; Baker, Alexander; Wang, Shouguo; Yu, Guanghua; Hesjedal, Thorsten
2015-03-01
Stacking nonvolatile memory cells into a three-dimensional matrix represents a powerful solution for the future of magnetic memory. However, it is technologically challenging to access the individual data in the storage medium if large numbers of bits are stacked on top of each other. Here we introduce a new type of multilevel, nonvolatile magnetic memory concept, the magnetic abacus. Instead of storing information in individual magnetic layers, thereby having to read out each magnetic layer separately, the magnetic abacus adopts a new encoding scheme which envisages a classical abacus with the beads operated by electron spins. It is inspired by the idea of second quantization, dealing with the memory state of the entire stack simultaneously. Direct read operations are implemented by measuring the artificially engineered `quantized' Hall voltage, representing a count of the spin-up and spin-down layers in the stack. This concept of `second quantization of memory' realizes the 3D memory architecture with superior reading and operation efficiency, thus is a promising approach for future nonvolatile magnetic random access memory.
Three-dimensional colloidal lithography
Nagai, Hironori; Poteet, Austen; Zhang, Xu A.; Chang, Chih-Hao
2017-03-01
Light interactions with colloidal particles can generate a variety of complex three-dimensional (3D) intensity patterns, which can be utilized for nanolithography. The study of particle–light interactions can add more types of intensity patterns by manipulating key factors. Here we investigate a novel 3D nanolithography technique using colloidal particles under two-beam coherent illuminations. The fabricated 3D nanostructures are hollow, nested within periodic structures, and possess multiple chamber geometry. The effects of incident angles and particle size on the fabricated nanostructures were examined. The relative phase shift between particle position and interference pattern is identified as another significant parameter influencing the resultant nanostructures. A numerical model has been developed to show the evolution of nanostructure geometry with phase shifts, and experimental studies confirm the simulation results. Through the introduction of single colloidal particles, the fabrication capability of Lloyd’s mirror interference can now be extended to fabrication of 3D nanostructure with complex shell geometry. The fabricated hollow nanostructures with grating background could find potential applications in the area of photonics, drug delivery, and nanofluidics.
Three-Dimensional Space to Assess Cloud Interoperability
2013-03-01
major cloud providers, OpenStack and OpeNebula, to demonstrate the usage of the three-dimensional space and its benefits . We start this chapter with a...documentation:rel4.0:external_auth. [68] X. Gao, P. Shah, A. Yoga , A. Kodgire and X. Ni. Cloud storage survey [Online]. Available: http
Elastocapillary fabrication of three-dimensional microstructures
Honschoten, van J.W.; Berenschot, J.W.; Ondarcuhu, T.; Sanders, R.G.P.; Sundaram, J.; Elwenspoek, M.; Tas, N.R.
2010-01-01
We describe the fabrication of three-dimensional microstructures by means of capillary forces. Using an origami-like technique, planar silicon nitride structures of various geometries are folded to produce three-dimensional objects of 50–100 m. Capillarity is a particularly effective mechanism since
Three-Dimensional Gravity and String Ghosts
Carlip, S.; Kogan, I. I.
1991-01-01
It is known that much of the structure of string theory can be derived from three-dimensional topological field theory and gravity. We show here that, at least for simple topologies, the string diffeomorphism ghosts can also be explained in terms of three-dimensional physics.
Three Dimensional Illustrating--Three-Dimensional Vision and Deception of Sensibility
Szállassy, Noémi; Gánóczy, Anita; Kriska, György
2009-01-01
The wide-spread digital photography and computer use gave the opportunity for everyone to make three-dimensional pictures and to make them public. The new opportunities with three-dimensional techniques give chance for the birth of new artistic photographs. We present in detail the biological roots of three-dimensional visualization, the phenomena…
Device fabrication: Three-dimensional printed electronics
Lewis, Jennifer A.; Ahn, Bok Y.
2015-02-01
Can three-dimensional printing enable the mass customization of electronic devices? A study that exploits this method to create light-emitting diodes based on 'quantum dots' provides a step towards this goal.
Three-Dimensional Icosahedral Phase Field Quasicrystal
Subramanian, P.; Archer, A. J.; Knobloch, E.; Rucklidge, A. M.
2016-08-01
We investigate the formation and stability of icosahedral quasicrystalline structures using a dynamic phase field crystal model. Nonlinear interactions between density waves at two length scales stabilize three-dimensional quasicrystals. We determine the phase diagram and parameter values required for the quasicrystal to be the global minimum free energy state. We demonstrate that traits that promote the formation of two-dimensional quasicrystals are extant in three dimensions, and highlight the characteristics required for three-dimensional soft matter quasicrystal formation.
Three-dimensional imaging modalities in endodontics
Mao, Teresa; NEELAKANTAN, Prasanna
2014-01-01
Recent research in endodontics has highlighted the need for three-dimensional imaging in the clinical arena as well as in research. Three-dimensional imaging using computed tomography (CT) has been used in endodontics over the past decade. Three types of CT scans have been studied in endodontics, namely cone-beam CT, spiral CT, and peripheral quantitative CT. Contemporary endodontics places an emphasis on the use of cone-beam CT for an accurate diagnosis of parameters that cannot be visualize...
Three-dimensional imaging modalities in endodontics
Mao, Teresa; Neelakantan, Prasanna
2014-01-01
Recent research in endodontics has highlighted the need for three-dimensional imaging in the clinical arena as well as in research. Three-dimensional imaging using computed tomography (CT) has been used in endodontics over the past decade. Three types of CT scans have been studied in endodontics, namely cone-beam CT, spiral CT, and peripheral quantitative CT. Contemporary endodontics places an emphasis on the use of cone-beam CT for an accurate diagnosis of parameters that cannot be visualize...
APPLICATIONS OF FRACTIONAL EXTERIOR DIFFERENTIAL IN THREE-DIMENSIONAL SPACE
Institute of Scientific and Technical Information of China (English)
陈勇; 闫振亚; 张鸿庆
2003-01-01
A brief survey of fractional calculus and fractional differential forms was firstly given. The fractional exterior transition to curvilinear coordinate at the origin were discussed and the two coordinate transformations for the fractional differentials for three-dimensional Cartesian coordinates to spherical and cylindrical coordinates are obtained, respectively. In particular, for v = m = 1 , the usual exterior transformations, between the spherical coordinate and Cartesian coordinate, as well as the cylindrical coordinate and Cartesian coordinate, are found respectively, from fractional exterior transformation.
Transferring color between three-dimensional objects
Shen, Hui-Liang; Xin, John H.
2005-04-01
A framework for transferring image-based color between three-dimensional objects by the use of a dichromatic reflection model is proposed. The framework addresses the following issues: (1) accurate recovery of an implicit geometric coefficient, (2) calculation of body color, (3) color transfer between different illuminants, and (4) segmentation of multicolored regions. The experimental results show that high color accuracy and photorealistic effects of the synthesized images can be achieved. The proposed technique has wide applications in image-based design and visualization of three-dimensional objects.
Two dimensional fermions in three dimensional YM
Narayanan, R
2010-01-01
Dirac fermions in the fundamental representation of $SU(N)$ live on the surface of a cylinder embedded in $R^3$ and interact with a three dimensional $SU(N)$ Yang Mills vector potential preserving a global chiral symmetry at finite $N$. As the circumference of the cylinder is varied from small to large, the chiral symmetry gets spontaneously broken in the infinite $N$ limit at a typical bulk scale. Replacing three dimensional YM by four dimensional YM introduces non-trivial renormalization effects.
Three-Dimensional Robotic Vision System
Nguyen, Thinh V.
1989-01-01
Stereoscopy and motion provide clues to outlines of objects. Digital image-processing system acts as "intelligent" automatic machine-vision system by processing views from stereoscopic television cameras into three-dimensional coordinates of moving object in view. Epipolar-line technique used to find corresponding points in stereoscopic views. Robotic vision system analyzes views from two television cameras to detect rigid three-dimensional objects and reconstruct numerically in terms of coordinates of corner points. Stereoscopy and effects of motion on two images complement each other in providing image-analyzing subsystem with clues to natures and locations of principal features.
Three dimensional dynamics of ferromagnetic swimmer
Energy Technology Data Exchange (ETDEWEB)
Erglis, K.; Livanovics, R. [Department of Physics, University of Latvia, Zellu 8, Ri-bar ga LV-1002 (Latvia); Cebers, A., E-mail: aceb@tesla.sal.l [Department of Physics, University of Latvia, Zellu 8, Ri-bar ga LV-1002 (Latvia)
2011-05-15
It is shown that a flexible ferromagnetic filament self-propels perpendicularly to the AC magnetic field during a limited period of time due to the instability of the planar motion with respect to three dimensional perturbations. The transition from the oscillating U-like shapes to the oscillating S-like shapes is characterized by the calculated Wr number. - Research Highlights: A ferromagnetic filament self-propels perpendicularly to the AC field. During the self-propulsion cycle the filament moves both forward and backward. The self-propulsion stops due to the three dimensional instability. The mechanism of the self-propulsion is similar to that used by some microorganisms.
Three dimensional electrochemical system for neurobiological studies
DEFF Research Database (Denmark)
Vazquez, Patricia; Dimaki, Maria; Svendsen, Winnie Edith
2009-01-01
In this work we report a novel three dimensional electrode array for electrochemical measurements in neuronal studies. The main advantage of working with these out-of-plane structures is the enhanced sensitivity of the system in terms of measuring electrochemical changes in the environment...
Electron crystallography of three dimensional protein crystals
Georgieva, Dilyana
2008-01-01
This thesis describes an investigation of the potential of electron diffraction for studying three dimensional sub-micro-crystals of proteins and pharmaceuticals. A prerequisite for using electron diffraction for structural studies is the predictable availability of tiny crystals. A method for grow
Three dimensional measurement of rhinoplasty results.
Heerbeek, N. van; Ingels, K.J.A.O.; Loon, B. van; Plooij, J.M.; Berge, S.J.
2009-01-01
BACKGROUND: Pre- and postoperative imaging is important and essential for evaluation of the results of rhinoplasty surgery. Two-dimensional photographs are used routinely for this purpose, but have several disadvantages as opposed to three-dimensional imaging techniques, such as
Three-dimensional patterning methods and related devices
Energy Technology Data Exchange (ETDEWEB)
Putnam, Morgan C.; Kelzenberg, Michael D.; Atwater, Harry A.; Boettcher, Shannon W.; Lewis, Nathan S.; Spurgeon, Joshua M.; Turner-Evans, Daniel B.; Warren, Emily L.
2016-12-27
Three-dimensional patterning methods of a three-dimensional microstructure, such as a semiconductor wire array, are described, in conjunction with etching and/or deposition steps to pattern the three-dimensional microstructure.
Three-dimensional audio-magnetotelluric sounding in monitoring coalbed methane reservoirs
Wang, Nan; Zhao, Shanshan; Hui, Jian; Qin, Qiming
2017-03-01
Audio-magnetotelluric (AMT) sounding is widely employed in rapid resistivity delineation of objective geometry in near surface exploration. According to reservoir patterns and electrical parameters obtained in Qinshui Basin, China, two-dimensional and three-dimensional synthetic "objective anomaly" models were designed and inverted with the availability of a modular system for electromagnetic inversion (ModEM). The results revealed that 3-D full impedance inversion yielded the subsurface models closest to synthetic models. One or more conductive targets were correctly recovered. Therefore, conductive aquifers in the study area, including hydrous coalbed methane (CBM) reservoirs, were suggested to be the interpretation signs for reservoir characterization. With the aim of dynamic monitoring of CBM reservoirs, the AMT surveys in continuous years (June 2013-May 2015) were carried out. 3-D inversion results demonstrated that conductive anomalies accumulated around the producing reservoirs at the corresponding depths if CBM reservoirs were in high water production rates. In contrast, smaller conductive anomalies were generally identical with rapid gas production or stopping production of reservoirs. These analyses were in accordance with actual production history of CBM wells. The dynamic traces of conductive anomalies revealed that reservoir water migrated deep or converged in axial parts and wings of folds, which contributed significantly to formations of CBM traps. Then the well spacing scenario was also evaluated based on the dynamic production analysis. Wells distributed near closed faults or flat folds, rather than open faults, had CBM production potential to ascertain stable gas production. Therefore, three-dimensional AMT sounding becomes an attractive option with the ability of dynamic monitoring of CBM reservoirs, and lays a solid foundation of quantitative evaluation of reservoir parameters.
Artifacts in three-dimensional transesophageal echocardiography.
Faletra, Francesco Fulvio; Ramamurthi, Alamelu; Dequarti, Maria Cristina; Leo, Laura Anna; Moccetti, Tiziano; Pandian, Natesa
2014-05-01
Three-dimensional (3D) transesophageal echocardiography (TEE) is subject to the same types of artifacts encountered on two-dimensional TEE. However, when displayed in a 3D format, some of the artifacts appear more "realistic," whereas others are unique to image acquisition and postprocessing. Three-dimensional TEE is increasingly used in the setting of percutaneous catheter-based interventions and ablation procedures, and 3D artifacts caused by the metallic components of catheters and devices are particularly frequent. Knowledge of these artifacts is of paramount relevance to avoid misinterpretation of 3D images. Although artifacts and pitfalls on two-dimensional echocardiography are well described and classified, a systematic description of artifacts in 3D transesophageal echocardiographic images and how they affect 3D imaging is still absent. The aim of this review is to describe the most relevant artifacts on 3D TEE, with particular emphasis on those occurring during percutaneous interventions for structural heart disease and ablation procedures.
Deformations of three-dimensional metrics
Pugliese, Daniela; Stornaiolo, Cosimo
2015-03-01
We examine three-dimensional metric deformations based on a tetrad transformation through the action the matrices of scalar field. We describe by this approach to deformation the results obtained by Coll et al. (Gen. Relativ. Gravit. 34:269, 2002), where it is stated that any three-dimensional metric was locally obtained as a deformation of a constant curvature metric parameterized by a 2-form. To this aim, we construct the corresponding deforming matrices and provide their classification according to the properties of the scalar and of the vector used in Coll et al. (Gen Relativ Gravit 34:269, 2002) to deform the initial metric. The resulting causal structure of the deformed geometries is examined, too. Finally we apply our results to a spherically symmetric three geometry and to a space sector of Kerr metric.
THREE DIMENSIONAL GRAPHICAL REPRESENTATION OF QUALITY
Directory of Open Access Journals (Sweden)
Vineet V. Kumar
2014-03-01
Full Text Available Quality is an important aspect for every firm in modern era of competition. Every product has tough competition in terms of market reach. The factor, which actually makes any product long run in market, is quality and hence quality is the stepping-stone for success of any firm. For everyone meaning of quality is different. We have seen several economists who have defined quality by considering different factors, but what all of them have common in them is Customer satisfaction. Customer satisfaction is the ultimate result of quality. In three-dimensional graphical representation of quality, optimum quality is obtained by using three-dimensional graph by considering some important factors governing quality of any product, limiting factor, and customer satisfaction.
Three-dimensional broadband tunable terahertz metamaterials
DEFF Research Database (Denmark)
Fan, Kebin; Strikwerda, Andrew; Zhang, Xin
2013-01-01
We present optically tunable magnetic three-dimensional (3D) metamaterials at terahertz (THz) frequencies which exhibit a tuning range of ~30% of the resonance frequency. This is accomplished by fabricating 3D array structures consisting of double-split-ring resonators (DSRRs) on silicon on sapph......We present optically tunable magnetic three-dimensional (3D) metamaterials at terahertz (THz) frequencies which exhibit a tuning range of ~30% of the resonance frequency. This is accomplished by fabricating 3D array structures consisting of double-split-ring resonators (DSRRs) on silicon...... as verified through electromagnetic simulations and parameter retrieval. Our approach extends dynamic metamaterial tuning to magnetic control, and may find applications in switching and modulation, polarization control, or tunable perfect absorbers....
Three-dimensional imaging modalities in endodontics
Energy Technology Data Exchange (ETDEWEB)
Mao, Teresa; Neelakantan, Prasanna [Dept. of Conservative Dentistry and Endodontics, Saveetha Dental College and Hospitals, Saveetha University, Chennai (India)
2014-09-15
Recent research in endodontics has highlighted the need for three-dimensional imaging in the clinical arena as well as in research. Three-dimensional imaging using computed tomography (CT) has been used in endodontics over the past decade. Three types of CT scans have been studied in endodontics, namely cone-beam CT, spiral CT, and peripheral quantitative CT. Contemporary endodontics places an emphasis on the use of cone-beam CT for an accurate diagnosis of parameters that cannot be visualized on a two-dimensional image. This review discusses the role of CT in endodontics, pertaining to its importance in the diagnosis of root canal anatomy, detection of peri-radicular lesions, diagnosis of trauma and resorption, presurgical assessment, and evaluation of the treatment outcome.
Three-dimensional imaging modalities in endodontics.
Mao, Teresa; Neelakantan, Prasanna
2014-09-01
Recent research in endodontics has highlighted the need for three-dimensional imaging in the clinical arena as well as in research. Three-dimensional imaging using computed tomography (CT) has been used in endodontics over the past decade. Three types of CT scans have been studied in endodontics, namely cone-beam CT, spiral CT, and peripheral quantitative CT. Contemporary endodontics places an emphasis on the use of cone-beam CT for an accurate diagnosis of parameters that cannot be visualized on a two-dimensional image. This review discusses the role of CT in endodontics, pertaining to its importance in the diagnosis of root canal anatomy, detection of peri-radicular lesions, diagnosis of trauma and resorption, presurgical assessment, and evaluation of the treatment outcome.
Three-dimensional Imaging, Visualization, and Display
Javidi, Bahram; Son, Jung-Young
2009-01-01
Three-Dimensional Imaging, Visualization, and Display describes recent developments, as well as the prospects and challenges facing 3D imaging, visualization, and display systems and devices. With the rapid advances in electronics, hardware, and software, 3D imaging techniques can now be implemented with commercially available components and can be used for many applications. This volume discusses the state-of-the-art in 3D display and visualization technologies, including binocular, multi-view, holographic, and image reproduction and capture techniques. It also covers 3D optical systems, 3D display instruments, 3D imaging applications, and details several attractive methods for producing 3D moving pictures. This book integrates the background material with new advances and applications in the field, and the available online supplement will include full color videos of 3D display systems. Three-Dimensional Imaging, Visualization, and Display is suitable for electrical engineers, computer scientists, optical e...
Three-Dimensional Printing in Orthopedic Surgery.
Eltorai, Adam E M; Nguyen, Eric; Daniels, Alan H
2015-11-01
Three-dimensional (3D) printing is emerging as a clinically promising technology for rapid prototyping of surgically implantable products. With this commercially available technology, computed tomography or magnetic resonance images can be used to create graspable objects from 3D reconstructed images. Models can enhance patients' understanding of their pathology and surgeon preoperative planning. Customized implants and casts can be made to match an individual's anatomy. This review outlines 3D printing, its current applications in orthopedics, and promising future directions.
Lossless compression for three-dimensional images
Tang, Xiaoli; Pearlman, William A.
2004-01-01
We investigate and compare the performance of several three-dimensional (3D) embedded wavelet algorithms on lossless 3D image compression. The algorithms are Asymmetric Tree Three-Dimensional Set Partitioning In Hierarchical Trees (AT-3DSPIHT), Three-Dimensional Set Partitioned Embedded bloCK (3D-SPECK), Three-Dimensional Context-Based Embedded Zerotrees of Wavelet coefficients (3D-CB-EZW), and JPEG2000 Part II for multi-component images. Two kinds of images are investigated in our study -- 8-bit CT and MR medical images and 16-bit AVIRIS hyperspectral images. First, the performances by using different size of coding units are compared. It shows that increasing the size of coding unit improves the performance somewhat. Second, the performances by using different integer wavelet transforms are compared for AT-3DSPIHT, 3D-SPECK and 3D-CB-EZW. None of the considered filters always performs the best for all data sets and algorithms. At last, we compare the different lossless compression algorithms by applying integer wavelet transform on the entire image volumes. For 8-bit medical image volumes, AT-3DSPIHT performs the best almost all the time, achieving average of 12% decreases in file size compared with JPEG2000 multi-component, the second performer. For 16-bit hyperspectral images, AT-3DSPIHT always performs the best, yielding average 5.8% and 8.9% decreases in file size compared with 3D-SPECK and JPEG2000 multi-component, respectively. Two 2D compression algorithms, JPEG2000 and UNIX zip, are also included for reference, and all 3D algorithms perform much better than 2D algorithms.
Three-dimensional display of document set
Energy Technology Data Exchange (ETDEWEB)
Lantrip, David B [Oxnard, CA; Pennock, Kelly A [Richland, WA; Pottier, Marc C [Richland, WA; Schur, Anne [Richland, WA; Thomas, James J [Richland, WA; Wise, James A [Richland, WA; York, Jeremy [Bothell, WA
2009-06-30
A method for spatializing text content for enhanced visual browsing and analysis. The invention is applied to large text document corpora such as digital libraries, regulations and procedures, archived reports, and the like. The text content from these sources may be transformed to a spatial representation that preserves informational characteristics from the documents. The three-dimensional representation may then be visually browsed and analyzed in ways that avoid language processing and that reduce the analysts' effort.
Three-dimensional display of document set
Energy Technology Data Exchange (ETDEWEB)
Lantrip, David B. (Oxnard, CA); Pennock, Kelly A. (Richland, WA); Pottier, Marc C. (Richland, WA); Schur, Anne (Richland, WA); Thomas, James J. (Richland, WA); Wise, James A. (Richland, WA)
2006-09-26
A method for spatializing text content for enhanced visual browsing and analysis. The invention is applied to large text document corpora such as digital libraries, regulations and procedures, archived reports, and the like. The text content from these sources may e transformed to a spatial representation that preserves informational characteristics from the documents. The three-dimensional representation may then be visually browsed and analyzed in ways that avoid language processing and that reduce the analysts' effort.
Three-Dimensional Dispaly Of Document Set
Energy Technology Data Exchange (ETDEWEB)
Lantrip, David B. (Oxnard, CA); Pennock, Kelly A. (Richland, WA); Pottier, Marc C. (Richland, WA); Schur, Anne (Richland, WA); Thomas, James J. (Richland, WA); Wise, James A. (Richland, WA)
2003-06-24
A method for spatializing text content for enhanced visual browsing and analysis. The invention is applied to large text document corpora such as digital libraries, regulations and procedures, archived reports, and the like. The text content from these sources may be transformed to a spatial representation that preserves informational characteristics from the documents. The three-dimensional representation may then be visually browsed and analyzed in ways that avoid language processing and that reduce the analysts' effort.
Three-dimensional display of document set
Energy Technology Data Exchange (ETDEWEB)
Lantrip, David B [Oxnard, CA; Pennock, Kelly A [Richland, WA; Pottier, Marc C [Richland, WA; Schur, Anne [Richland, WA; Thomas, James J [Richland, WA; Wise, James A [Richland, WA
2001-10-02
A method for spatializing text content for enhanced visual browsing and analysis. The invention is applied to large text document corpora such as digital libraries, regulations and procedures, archived reports, and the like. The text content from these sources may be transformed to a spatial representation that preserves informational characteristics from the documents. The three-dimensional representation may then be visually browsed and analyzed in ways that avoid language processing and that reduce the analysts' effort.
Three-Dimensional Ocean Noise Modeling
2015-03-01
particular attention paid to the case of Gaussian canyon . The solution to the three-dimensional wave equation in Cartesian co-ordinates can be written...in terms of a modal decomposition, carried out in the vertical and across- canyon horizontal directions. Work Completed 1. Nx2D and 3D Noise PE...azimuth in the Hudson Canyon [Figure 2). Additionally, the PE-reciprocity noise model was used to estimate the size, speed and distance from the
Three dimensional boundary layers in internal flows
Bodonyi, R. J.
1987-01-01
A numerical study of the effects of viscous-inviscid interactions in three-dimensional duct flows is presented. In particular interacting flows for which the oncoming flow is not fully-developed were considered. In this case there is a thin boundary layer still present upstream of the surface distortion, as opposed to the fully-developed pipe flow situation wherein the flow is viscous across the cross section.
Multiparallel Three-Dimensional Optical Microscopy
Nguyen, Lam K.; Price, Jeffrey H.; Kellner, Albert L.; Bravo-Zanoquera, Miguel
2010-01-01
Multiparallel three-dimensional optical microscopy is a method of forming an approximate three-dimensional image of a microscope sample as a collection of images from different depths through the sample. The imaging apparatus includes a single microscope plus an assembly of beam splitters and mirrors that divide the output of the microscope into multiple channels. An imaging array of photodetectors in each channel is located at a different distance along the optical path from the microscope, corresponding to a focal plane at a different depth within the sample. The optical path leading to each photodetector array also includes lenses to compensate for the variation of magnification with distance so that the images ultimately formed on all the photodetector arrays are of the same magnification. The use of optical components common to multiple channels in a simple geometry makes it possible to obtain high light-transmission efficiency with an optically and mechanically simple assembly. In addition, because images can be read out simultaneously from all the photodetector arrays, the apparatus can support three-dimensional imaging at a high scanning rate.
Imaging unsteady three-dimensional transport phenomena
Indian Academy of Sciences (India)
K Muralidhar
2014-01-01
Careful and continuous measurements of flow, heat and mass transfer are required in quite a few contexts. Using appropriate light sources, it is possible to map velocity, temperature, and species concentration over a cross-section and as a function of time. Image formation in optical measurements may rely on scattering of radiation from particles. Alternatively, if the region of interest is transparent, refractive index would be a field variable and beam bending effects can be used to extract information about temperature and concentration of solutes dissolved in liquids. Time-lapsed images of light intensity can be used to determine fluid velocity. Though used originally for flow visualization, optical imaging has now emerged as a powerful tool for quantitative measurements. Optical methods that utilize the dependence of refractive index on concentration and temperature can be configured in many different ways. Three available routes considered are interferometry, schlieren imaging, and shadowgraph. Images recorded in these configurations can be analysed to yield time sequences of three-dimensional distributions of the transported variables. Optical methods are non-intrusive, inertia-free and can image cross-sections of the experimental apparatus. The image data can be jointly analysed with the physical laws governing transport and principles of image formation. Hence, with the experiment suitably carried out, three-dimensional physical domains with unsteady processes can be accommodated. Optical methods promise to breach the holy grail of measurements by extracting unsteady three-dimensional data in applications related to transport phenomena.
Volumetric Three-Dimensional Display Systems
Blundell, Barry G.; Schwarz, Adam J.
2000-03-01
A comprehensive study of approaches to three-dimensional visualization by volumetric display systems This groundbreaking volume provides an unbiased and in-depth discussion on a broad range of volumetric three-dimensional display systems. It examines the history, development, design, and future of these displays, and considers their potential for application to key areas in which visualization plays a major role. Drawing substantially on material that was previously unpublished or available only in patent form, the authors establish the first comprehensive technical and mathematical formalization of the field, and examine a number of different volumetric architectures. System level design strategies are presented, from which proposals for the next generation of high-definition predictable volumetric systems are developed. To ensure that researchers will benefit from work already completed, they provide: * Descriptions of several recent volumetric display systems prepared from material supplied by the teams that created them * An abstract volumetric display system design paradigm * An historical summary of 90 years of development in volumetric display system technology * An assessment of the strengths and weaknesses of many of the systems proposed to date * A unified presentation of the underlying principles of volumetric display systems * A comprehensive bibliography Beautifully supplemented with 17 color plates that illustrate volumetric images and prototype displays, Volumetric Three-Dimensional Display Systems is an indispensable resource for professionals in imaging systems development, scientific visualization, medical imaging, computer graphics, aerospace, military planning, and CAD/CAE.
Three dimensional illustrating - three-dimensional vision and deception of sensibility
Directory of Open Access Journals (Sweden)
Anita Gánóczy
2009-03-01
Full Text Available The wide-spread digital photography and computer use gave the opportunity for everyone to make three-dimensional pictures and to make them public. The new opportunities with three-dimensional techniques give chance for the birth of new artistic photographs. We present in detail the biological roots of three-dimensional visualization, the phenomena of movement parallax, which can be used efficiently in making three-dimensional graphics, the Zöllner- and Corridor-illusion. There are present in this paper the visual elements, which contribute to define a plane two-dimensional image in three-dimension: coherent lines, the covering, the measurement changes, the relative altitude state, the abatement of detail profusion, the shadings and the perspective effects of colors.
Three-dimensional analysis of craniofacial bones using three-dimensional computer tomography
Energy Technology Data Exchange (ETDEWEB)
Ono, Ichiro; Ohura, Takehiko; Kimura, Chu (Hokkaido Univ., Sapporo (Japan). School of Medicine) (and others)
1989-08-01
Three-dimensional computer tomography (3DCT) was performed in patients with various diseases to visualize stereoscopically the deformity of the craniofacial bones. The data obtained were analyzed by the 3DCT analyzing system. A new coordinate system was established using the median sagittal plane of the face (a plane passing through sella, nasion and basion) on the three-dimensional image. Three-dimensional profilograms were prepared for detailed analysis of the deformation of craniofacial bones for cleft lip and palate, mandibular prognathia and hemifacial microsomia. For patients, asymmetry in the frontal view and twist-formed complicated deformities were observed, as well as deformity of profiles in the anteroposterior and up-and-down directions. A newly developed technique allows three-dimensional visualization of changes in craniofacial deformity. It would aid in determining surgical strategy, including crani-facial surgery and maxillo-facial surgery, and in evaluating surgical outcome. (N.K.).
Design of Three-Dimensional Hypersonic Inlets with Rectangular to Elliptical Shape Transition
Smart, M. K.
1998-01-01
A methodology has been devised for the design of three-dimensional hypersonic inlets which include a rectangular to elliptical shape transition. This methodology makes extensive use of inviscid streamtracing techniques to generate a smooth shape transition from a rectangular-like capture to an elliptical throat. Highly swept leading edges and a significantly notched cowl enable use of these inlets in fixed geometry configurations. The design procedure includes a three dimensional displacement thickness calculation and uses established correlations to check for boundary layer separation due to shock wave interactions. Complete details of the design procedure are presented and the characteristics of a modular inlet with rectangular to elliptical shape transition and a design point of Mach 7.1 are examined. Comparison with a classical two-dimensional inlet optimized for maximum total pressure recovery indicates that this three-dimensional inlet demonstrates good performance even well below its design point.
Stability of three-dimensional boundary layers
Nayfeh, A. H.
1979-01-01
A theory is presented for the three-dimensional stability of boundary layers. Equations are derived for the evolution of a disturbance having a given frequency and originating at a given curve. These equations are used to determine the rays along which the disturbance energy propagates. It is shown that the results can be obtained by using the saddle-point method, or kinematic wave theory, or the method of multiple scales. Extension of the theory to the case of a wave packet is also presented.
Nonparallel stability of three-dimensional flows
Padhye, A. R.; Nayfeh, A. H.
1981-01-01
The linear stability of three-dimensional incompressible, isothermal, nonparallel boundary-layer flows has been investigated. The method of multiple scales is used to derive the partial-differential equations that describe the spatial modulations of the amplitude, phase and wavenumber of a disturbance. Group velocities are used to determine the disturbance growth direction. The envelope method is used to calculate the logarithmic amplitude growth rate N. The theory is applied to the flows over a swept-back tapered wing with boundary-layer suction. Results of such analysis for the X-21 wing are discussed. It is found that the nonparallel effects for this wing is substantial.
Stabilization of Three-Dimensional Collective Motion
Scardovi, Luca; Sepulchre, Rodolphe
2008-01-01
This paper proposes a methodology to stabilize relative equilibria in a model of identical, steered particles moving in three-dimensional Euclidean space. Exploiting the Lie group structure of the resulting dynamical system, the stabilization problem is reduced to a consensus problem on the Lie algebra. The resulting equilibria correspond to parallel, circular and helical formations. We first derive the stabilizing control laws in the presence of all-to-all communication. Providing each agent with a consensus estimator, we then extend the results to a general setting that allows for unidirectional and time-varying communication topologies.
Three-dimensional cooling of muons
Vsevolozhskaya, T A
2000-01-01
The simultaneous ionization cooling of muon beams in all three - the longitudinal and two transverse - directions is considered in a scheme, based on bent lithium lenses with dipole constituent of magnetic field in them, created by a special configuration of current-carrying rod. An analysis of three-dimensional cooling is performed with the use of kinetic equation method. Results of numerical calculation for a specific beam line configuration are presented together with results of computer simulation using the Moliere distribution to describe the Coulomb scattering and the Vavilov distribution used to describe the ionization loss of energy.
Three dimensional dilatonic gravity's rainbow: exact solutions
Hendi, Seyed Hossein; Panahiyan, Shahram
2016-01-01
Deep relations of dark energy scenario and string theory results with dilaton gravity, on one hand, and the connection between quantum gravity with gravity's rainbow, on the other hand, motivate us to consider three dimensional dilatonic black hole solutions in gravity's rainbow. We obtain two classes of the solutions which are polynomial and logarithmic forms. We also calculate conserved and thermodynamic quantities, and examine the first law of thermodynamics for both classes. In addition, we study thermal stability and show that one of the classes is thermally stable while the other one is unstable.
Three-dimensional echocardiography in valve disease.
Colombo, Chiara; Tamborini, Gloria; Pepi, Mauro; Alimento, Marina; Fiorentini, Cesare
2007-01-01
This review covers the role of three-dimensional (3D) echocardiography in the diagnosis of heart valve disease. Several factors have contributed to the evolution of this technique, which is currently a simple and routine method: rapid evolution in probe and computer technologies, demonstration that 3D data sets allowed more complete and accurate evaluation of cardiac structures, emerging clinical experience indicating the strong potential particularly in valve diseases, volume and function of the two ventricle measurements and several other fields. This report will review current and future applications of 3D echocardiography in mitral, aortic and tricuspid valve diseases underlying both qualitative (morphologic) and quantitative advantages of this technique.
Two component-three dimensional catalysis
Schwartz, Michael; White, James H.; Sammells, Anthony F.
2002-01-01
This invention relates to catalytic reactor membranes having a gas-impermeable membrane for transport of oxygen anions. The membrane has an oxidation surface and a reduction surface. The membrane is coated on its oxidation surface with an adherent catalyst layer and is optionally coated on its reduction surface with a catalyst that promotes reduction of an oxygen-containing species (e.g., O.sub.2, NO.sub.2, SO.sub.2, etc.) to generate oxygen anions on the membrane. The reactor has an oxidation zone and a reduction zone separated by the membrane. A component of an oxygen containing gas in the reduction zone is reduced at the membrane and a reduced species in a reactant gas in the oxidation zone of the reactor is oxidized. The reactor optionally contains a three-dimensional catalyst in the oxidation zone. The adherent catalyst layer and the three-dimensional catalyst are selected to promote a desired oxidation reaction, particularly a partial oxidation of a hydrocarbon.
Three-dimensional flow in Kupffer's Vesicle
Montenegro-Johnson, Thomas D; Smith, David J; Lopes, Susana S
2016-01-01
Whilst many vertebrates appear externally left-right symmetric, the arrangement of internal organs is asymmetric. In zebrafish, the breaking of left-right symmetry is organised by Kupffer's Vesicle (KV): an approximately spherical, fluid-filled structure that begins to form in the embryo 10 hours post fertilisation. A crucial component of zebrafish symmetry breaking is the establishment of a cilia-driven fluid flow within KV. However, it is still unclear (a) how dorsal, ventral and equatorial cilia contribute to the global vortical flow, and (b) if this flow breaks left-right symmetry through mechanical transduction or morphogen transport. Fully answering these questions requires knowledge of the three-dimensional flow patterns within KV, which have not been quantified in previous work. In this study, we calculate and analyse the three-dimensional flow in KV. We consider flow from both individual and groups of cilia, and (a) find anticlockwise flow can arise purely from excess of cilia on the dorsal roof over...
Three dimensional force balance of asymmetric droplets
Kim, Yeseul; Lim, Su Jin; Cho, Kun; Weon, Byung Mook
2016-11-01
An equilibrium contact angle of a droplet is determined by a horizontal force balance among vapor, liquid, and solid, which is known as Young's law. Conventional wetting law is valid only for axis-symmetric droplets, whereas real droplets are often asymmetric. Here we show that three-dimensional geometry must be considered for a force balance for asymmetric droplets. By visualizing asymmetric droplets placed on a free-standing membrane in air with X-ray microscopy, we are able to identify that force balances in one side and in other side control pinning behaviors during evaporation of droplets. We find that X-ray microscopy is powerful for realizing the three-dimensional force balance, which would be essential in interpretation and manipulation of wetting, spreading, and drying dynamics for asymmetric droplets. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2016R1D1A1B01007133).
Three dimensional quantum geometry and deformed symmetry
Joung, E.; Mourad, J.; Noui, K.
2009-05-01
We study a three dimensional noncommutative space emerging in the context of three dimensional Euclidean quantum gravity. Our starting point is the assumption that the isometry group is deformed to the Drinfeld double D(SU(2)). We generalize to the deformed case the construction of E3 as the quotient of its isometry group ISU(2) by SU(2). We show that the algebra of functions on E3 becomes the noncommutative algebra of SU(2) distributions, C(SU(2))∗, endowed with the convolution product. This construction gives the action of ISU(2) on the algebra and allows the determination of plane waves and coordinate functions. In particular, we show the following: (i) plane waves have bounded momenta; (ii) to a given momentum are associated several SU(2) elements leading to an effective description of ϕ ɛC(SU(2))∗ in terms of several physical scalar fields on E3; (iii) their product leads to a deformed addition rule of momenta consistent with the bound on the spectrum. We generalize to the noncommutative setting the "local" action for a scalar field. Finally, we obtain, using harmonic analysis, another useful description of the algebra as the direct sum of the algebra of matrices. The algebra of matrices inherits the action of ISU(2): rotations leave the order of the matrices invariant, whereas translations change the order in a way we explicitly determine.
Three-dimensional image signals: processing methods
Schiopu, Paul; Manea, Adrian; Craciun, Anca-Ileana; Craciun, Alexandru
2010-11-01
Over the years extensive studies have been carried out to apply coherent optics methods in real-time processing, communications and transmission image. This is especially true when a large amount of information needs to be processed, e.g., in high-resolution imaging. The recent progress in data-processing networks and communication systems has considerably increased the capacity of information exchange. We describe the results of literature investigation research of processing methods for the signals of the three-dimensional images. All commercially available 3D technologies today are based on stereoscopic viewing. 3D technology was once the exclusive domain of skilled computer-graphics developers with high-end machines and software. The images capture from the advanced 3D digital camera can be displayed onto screen of the 3D digital viewer with/ without special glasses. For this is needed considerable processing power and memory to create and render the complex mix of colors, textures, and virtual lighting and perspective necessary to make figures appear three-dimensional. Also, using a standard digital camera and a technique called phase-shift interferometry we can capture "digital holograms." These are holograms that can be stored on computer and transmitted over conventional networks. We present some research methods to process "digital holograms" for the Internet transmission and results.
Three-dimensional printing physiology laboratory technology.
Sulkin, Matthew S; Widder, Emily; Shao, Connie; Holzem, Katherine M; Gloschat, Christopher; Gutbrod, Sarah R; Efimov, Igor R
2013-12-01
Since its inception in 19th-century Germany, the physiology laboratory has been a complex and expensive research enterprise involving experts in various fields of science and engineering. Physiology research has been critically dependent on cutting-edge technological support of mechanical, electrical, optical, and more recently computer engineers. Evolution of modern experimental equipment is constrained by lack of direct communication between the physiological community and industry producing this equipment. Fortunately, recent advances in open source technologies, including three-dimensional printing, open source hardware and software, present an exciting opportunity to bring the design and development of research instrumentation to the end user, i.e., life scientists. Here we provide an overview on how to develop customized, cost-effective experimental equipment for physiology laboratories.
Three-dimensional context regulation of metastasis.
Erler, Janine T; Weaver, Valerie M
2009-01-01
Tumor progression ensues within a three-dimensional microenvironment that consists of cellular and non-cellular components. The extracellular matrix (ECM) and hypoxia are two non-cellular components that potently influence metastasis. ECM remodeling and collagen cross-linking stiffen the tissue stroma to promote transformation, tumor growth, motility and invasion, enhance cancer cell survival, enable metastatic dissemination, and facilitate the establishment of tumor cells at distant sites. Matrix degradation can additionally promote malignant progression and metastasis. Tumor hypoxia is functionally linked to altered stromal-epithelial interactions. Hypoxia additionally induces the expression of pro-migratory, survival and invasion genes, and up-regulates expression of ECM components and modifying enzymes, to enhance tumor progression and metastasis. Synergistic interactions between matrix remodeling and tumor hypoxia influence common mechanisms that maximize tumor progression and cooperate to drive metastasis. Thus, clarifying the molecular pathways by which ECM remodeling and tumor hypoxia intersect to promote tumor progression should identify novel therapeutic targets.
Three-dimensional hologram display system
Mintz, Frederick (Inventor); Chao, Tien-Hsin (Inventor); Bryant, Nevin (Inventor); Tsou, Peter (Inventor)
2009-01-01
The present invention relates to a three-dimensional (3D) hologram display system. The 3D hologram display system includes a projector device for projecting an image upon a display medium to form a 3D hologram. The 3D hologram is formed such that a viewer can view the holographic image from multiple angles up to 360 degrees. Multiple display media are described, namely a spinning diffusive screen, a circular diffuser screen, and an aerogel. The spinning diffusive screen utilizes spatial light modulators to control the image such that the 3D image is displayed on the rotating screen in a time-multiplexing manner. The circular diffuser screen includes multiple, simultaneously-operated projectors to project the image onto the circular diffuser screen from a plurality of locations, thereby forming the 3D image. The aerogel can use the projection device described as applicable to either the spinning diffusive screen or the circular diffuser screen.
Entanglement entropy in three dimensional gravity
Maxfield, Henry
2014-01-01
The Ryu-Takayanagi and covariant Hubeny-Rangamani-Takayanagi proposals relate entanglement entropy in CFTs with holographic duals to the areas of minimal or extremal surfaces in the bulk geometry. We show how, in three dimensional pure gravity, the relevant regulated geodesic lengths can be obtained by writing a spacetime as a quotients of AdS3, with the problem reduced to a simple purely algebraic calculation. We explain how this works in both Lorentzian and Euclidean formalisms, before illustrating its use to obtain novel results in a number of examples, including rotating BTZ, the RP2 geon, and several wormhole geometries. This includes spatial and temporal dependence of single-interval entanglement entropy, despite these symmetries being broken only behind an event horizon. We also discuss considerations allowing HRT to be derived from analytic continuation of Euclidean computations in certain contexts, and a related class of complexified extremal surfaces.
Three-Dimensional Pneumatic Molding of Veneers
Directory of Open Access Journals (Sweden)
Milan Gaff
2014-07-01
Full Text Available The goal of this paper is to introduce a new testing method suitable for the evaluation of the three-dimensional (3-D moldability of veneers and to use this method to test the impact of specific factors on the 3-D pneumatic molding process. The tested factors included veneer moisture content, wood species, shape of test piece, and fixing method on the maximum wood deflection. Veneers were molded using compressed air on equipment designed by our group for the sole purpose of this experiment. The results indicated that the monitored factors had an effect on deflection during the 3-D molding process. The results of this investigation extend the state-of-the-art knowledge regarding this technology and indicate the possibility of utilizing this innovative testing method for 3-D molded veneers.
Three dimensional fabric evolution of sheared sand
Energy Technology Data Exchange (ETDEWEB)
Hasan, Alsidqi; Alshibli, Khalid (UWA)
2012-10-24
Granular particles undergo translation and rolling when they are sheared. This paper presents a three-dimensional (3D) experimental assessment of fabric evolution of sheared sand at the particle level. F-75 Ottawa sand specimen was tested under an axisymmetric triaxial loading condition. It measured 9.5 mm in diameter and 20 mm in height. The quantitative evaluation was conducted by analyzing 3D high-resolution x-ray synchrotron micro-tomography images of the specimen at eight axial strain levels. The analyses included visualization of particle translation and rotation, and quantification of fabric orientation as shearing continued. Representative individual particles were successfully tracked and visualized to assess the mode of interaction between them. This paper discusses fabric evolution and compares the evolution of particles within and outside the shear band as shearing continues. Changes in particle orientation distributions are presented using fabric histograms and fabric tensor.
Dual solutions for three-dimensional
Directory of Open Access Journals (Sweden)
C.S.K. Raju
2016-03-01
Full Text Available In this study we investigated the effect of space and temperature dependent heat generation/absorption on three-dimensional magnetohydrodynamic nanofluid flow over a nonlinearly permeable stretching sheet. After using appropriate self-similarity transformation the governing equations are solved numerically using bvp4c Matlab package. The effects of the non-dimensional governing parameters on velocity, temperature and concentration profiles are discussed with the help of graphs. Also, coefficient of skin friction and Nusselt number is analyzed and presented through tables. It is found that present results have an excellent agreement with the existed studies under some special cases. Results indicate that an increase in space and temperature dependent heat source or sink increases the temperature and concentration profiles of the flow. Dual solutions exist only for certain range of power-law index.
Three-Dimensional Reflectance Traction Microscopy.
Directory of Open Access Journals (Sweden)
Jihan Kim
Full Text Available Cells in three-dimensional (3D environments exhibit very different biochemical and biophysical phenotypes compared to the behavior of cells in two-dimensional (2D environments. As an important biomechanical measurement, 2D traction force microscopy can not be directly extended into 3D cases. In order to quantitatively characterize the contraction field, we have developed 3D reflectance traction microscopy which combines confocal reflection imaging and partial volume correlation postprocessing. We have measured the deformation field of collagen gel under controlled mechanical stress. We have also characterized the deformation field generated by invasive breast cancer cells of different morphologies in 3D collagen matrix. In contrast to employ dispersed tracing particles or fluorescently-tagged matrix proteins, our methods provide a label-free, computationally effective strategy to study the cell mechanics in native 3D extracellular matrix.
Steady inviscid three-dimensional flows
Adamczyk, J. J.; Chang, S.-C.
1985-01-01
The present analysis combines some of the theoretical concepts suggested by Hawthorne (1955) with a numerical integration procedure suggested by Martin (1978). The resulting algorithm is for inviscid subsonic flows. Thus, it is restricted to high Reynolds number flows. Chang and Adamczyk (1983) have provided a detailed derivation of the present algorithm along with a discussion of its stability bounds. The present paper represents a summary of this work. The integration of the continuity equation is considered along with an evaluation of the entropy, total temperature, and vorticity field. Attention is given to the shear-flow algorithm construction, and an application to a shear flow in a turning channel. A description of numerical results is also provided. The discussed algorithm represents a new procedure for solving inviscid subsonic three-dimensional rotational flows.
Scaffolding for Three-Dimensional Embryonic Vasculogenesis
Kraehenbuehl, Thomas P.; Aday, Sezin; Ferreira, Lino S.
Biomaterial scaffolds have great potential to support efficient vascular differentiation of embryonic stem cells. Vascular cell fate-specific biochemical and biophysical cues have been identified and incorporated into three-dimensional (3D) biomaterials to efficiently direct embryonic vasculogenesis. The resulting vascular-like tissue can be used for regenerative medicine applications, further elucidation of biophysical and biochemical cues governing vasculogenesis, and drug discovery. In this chapter, we give an overview on the following: (1) developmental cues for directed differentiation of human embryonic stem cells (hESCs) into vascular cells, (2) 3D vascular differentiation in embryoid bodies (EBs), (3) preparation of 3D scaffolds for the vascular differentiation of hESCs, and (4) the most significant studies combining scaffolding and hESCs for development of vascular-like tissue.
Three-dimensional tori and Arnold tongues
Energy Technology Data Exchange (ETDEWEB)
Sekikawa, Munehisa, E-mail: sekikawa@cc.utsunomiya-u.ac.jp [Department of Mechanical and Intelligent Engineering, Utsunomiya University, Utsunomiya-shi 321-8585 (Japan); Inaba, Naohiko [Organization for the Strategic Coordination of Research and Intellectual Property, Meiji University, Kawasaki-shi 214-8571 (Japan); Kamiyama, Kyohei [Department of Electronics and Bioinformatics, Meiji University, Kawasaki-shi 214-8571 (Japan); Aihara, Kazuyuki [Institute of Industrial Science, the University of Tokyo, Meguro-ku 153-8505 (Japan)
2014-03-15
This study analyzes an Arnold resonance web, which includes complicated quasi-periodic bifurcations, by conducting a Lyapunov analysis for a coupled delayed logistic map. The map can exhibit a two-dimensional invariant torus (IT), which corresponds to a three-dimensional torus in vector fields. Numerous one-dimensional invariant closed curves (ICCs), which correspond to two-dimensional tori in vector fields, exist in a very complicated but reasonable manner inside an IT-generating region. Periodic solutions emerge at the intersections of two different thin ICC-generating regions, which we call ICC-Arnold tongues, because all three independent-frequency components of the IT become rational at the intersections. Additionally, we observe a significant bifurcation structure where conventional Arnold tongues transit to ICC-Arnold tongues through a Neimark-Sacker bifurcation in the neighborhood of a quasi-periodic Hopf bifurcation (or a quasi-periodic Neimark-Sacker bifurcation) boundary.
Entanglement entropy in three dimensional gravity
Energy Technology Data Exchange (ETDEWEB)
Maxfield, Henry [Centre for Particle Theory & Department of Mathematical Sciences, Durham University,South Road, Durham DH1 3LE (United Kingdom)
2015-04-07
The Ryu-Takayanagi (RT) and covariant Hubeny-Rangamani-Takayanagi (HRT) proposals relate entanglement entropy in CFTs with holographic duals to the areas of minimal or extremal surfaces in the bulk geometry. We show how, in three dimensional pure gravity, the relevant regulated geodesic lengths can be obtained by writing a spacetime as a quotient of AdS{sub 3}, with the problem reduced to a simple purely algebraic calculation. We explain how this works in both Lorentzian and Euclidean formalisms, before illustrating its use to obtain novel results in a number of examples, including rotating BTZ, the ℝℙ{sup 2} geon, and several wormhole geometries. This includes spatial and temporal dependence of single-interval entanglement entropy, despite these symmetries being broken only behind an event horizon. We also discuss considerations allowing HRT to be derived from analytic continuation of Euclidean computations in certain contexts, and a related class of complexified extremal surfaces.
AAOGlimpse: Three-dimensional Data Viewer
Shortridge, Keith
2011-10-01
AAOGlimpse is an experimental display program that uses OpenGL to display FITS data (and even JPEG images) as 3D surfaces that can be rotated and viewed from different angles, all in real-time. It is WCS-compliant and designed to handle three-dimensional data. Each plane in a data cube is surfaced in the same way, and the program allows the user to travel through a cube by 'peeling off' successive planes, or to look into a cube by suppressing the display of data below a given cutoff value. It can blink images and can superimpose images and contour maps from different sources using their world coordinate data. A limited socket interface allows communication with other programs.
Three dimensional polymer waveguide using hybrid lithography.
Wang, Huanran; Liu, Yu; Jiang, Minghui; Chen, Changming; Wang, Xibin; Wang, Fei; Zhang, Daming; Yi, Yunji
2015-10-01
A three dimensional polymer waveguide with taper structure was demonstrated and fabricated by a reliable and effective hybrid lithography. The hybrid lithography consists of lithography to fabricate a polymer waveguide and gray scale lithography to fabricate a polymer taper structure. Laser ablation and shadow aluminum evaporation were designed for gray scale lithography. The length of the gray scale region ranging from 20 to 400 μm could be controlled by the laser power, the ablation speed, and the aluminum thickness. The slope angle was determined by the length of the gray scale region and the thickness of the photoresist. The waveguide taper structure could be transferred to the lower layer by the etching method. The taper structure can be used for integration of the waveguide with different dimensions.
Three-dimensional printing of biological matters
Directory of Open Access Journals (Sweden)
Ahmed Munaz
2016-03-01
Full Text Available Three-dimensional (3D printing of human tissues and organ has been an exciting research topic in the past three decades. However, existing technological and biological challenges still require a significant amount of research. The present review highlights these challenges and discusses their potential solutions such as mapping and converting a human organ onto a 3D virtual design, synchronizing the virtual design with the printing hardware. Moreover, the paper discusses in details recent advances in formulating bio-inks and challenges in tissue construction with or without scaffold. Next, the paper reviews fusion processes effecting vascular cells and tissues. Finally, the paper deliberates the feasibility of organ printing with state-of-the-art technologies.
Localized shear generates three-dimensional transport
Smith, Lachlan D.; Rudman, Murray; Lester, Daniel R.; Metcalfe, Guy
2017-04-01
Understanding the mechanisms that control three-dimensional (3D) fluid transport is central to many processes, including mixing, chemical reaction, and biological activity. Here a novel mechanism for 3D transport is uncovered where fluid particles are kicked between streamlines near a localized shear, which occurs in many flows and materials. This results in 3D transport similar to Resonance Induced Dispersion (RID); however, this new mechanism is more rapid and mutually incompatible with RID. We explore its governing impact with both an abstract 2-action flow and a model fluid flow. We show that transitions from one-dimensional (1D) to two-dimensional (2D) and 2D to 3D transport occur based on the relative magnitudes of streamline jumps in two transverse directions.
GaN three dimensional nanostructures
Energy Technology Data Exchange (ETDEWEB)
Dmitriev, V.; Irvin, K. [Cree Research, Inc., Durham, NC (United States); Zubrilov, A.; Tsvetkov, D.; Nikolaev, V. [Cree Research EED, St. Petersburg (Russian Federation); Jakobson, M.; Nelson, D.; Sitnikova, A. [A.F. Ioffe Inst., St. Petersburg (Russian Federation)
1996-11-01
The authors report on the growth and characterization of three dimensional nanoscale structures of GaN. GaN dots were grown by metal organic chemical vapor deposition (MOCVD) on 6H-SiC substrates. The actual size of the dots measured by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) ranged from {approximately}20 nm to more than 2 {micro}m. The average dot density ranged from 10{sup 7} to 10{sup 9} cm{sup {minus}2}. The single crystal structure of the dots was verified by reflectance high energy electron diffraction (HEED) and TEM. Cathodoluminescence (CL) and photoluminescence (PL) of the dots were studied at various temperatures and excitation levels. The PL and CL edge peak for the GaN dots exhibited a blue shift as compared with edge peak position for continuous GaN layers grown on SiC.
Exact solutions in three-dimensional gravity
Garcia-Diaz, Alberto A
2017-01-01
A self-contained text, systematically presenting the determination and classification of exact solutions in three-dimensional Einstein gravity. This book explores the theoretical framework and general physical and geometrical characteristics of each class of solutions, and includes information on the researchers responsible for their discovery. Beginning with the physical character of the solutions, these are identified and ordered on the basis of their geometrical invariant properties, symmetries, and algebraic classifications, or from the standpoint of their physical nature, for example electrodynamic fields, fluid, scalar field, or dilaton. Consequently, this text serves as a thorough catalogue on 2+1 exact solutions to the Einstein equations coupled to matter and fields, and on vacuum solutions of topologically massive gravity with a cosmological constant. The solutions are also examined from different perspectives, enabling a conceptual bridge between exact solutions of three- and four-dimensional gravit...
Lattice Three-Dimensional Skyrmions Revisited
Charalampidis, E G; Kevrekidis, P G
2014-01-01
In the continuum a skyrmion is a topological nontrivial map between Riemannian manifolds, and a stationary point of a particular energy functional. This paper describes lattice analogues of the aforementioned skyrmions, namely a natural way of using the topological properties of the three-dimensional continuum Skyrme model to achieve topological stability on the lattice. In particular, using fixed point iterations, numerically exact lattice skyrmions are constructed; and their stability under small perturbations is verified by means of linear stability analysis. While stable branches of such solutions are identified, it is also shown that they possess a particularly delicate bifurcation structure, especially so in the vicinity of the continuum limit. The corresponding bifurcation diagram is elucidated and a prescription for selecting the branch asymptoting to the well-known continuum limit is given. Finally, the robustness of the solutions by virtue of direct numerical simulations is corroborated.
Three-dimensional extinction mapping using Gaussian random fields
Sale, S E
2014-01-01
We present a scheme for using stellar catalogues to map the three-dimensional distributions of extinction and dust within our Galaxy. Extinction is modelled as a Gaussian random field, whose covariance function is set by a simple physical model of the ISM that assumes a Kolmogorov-like power spectrum of turbulent fluctuations. As extinction is modelled as a random field, the spatial resolution of the resulting maps is set naturally by the data available; there is no need to impose any spatial binning. We verify the validity of our scheme by testing it on simulated extinction fields and show that its precision is significantly improved over previous dust-mapping efforts. The approach we describe here can make use of any photometric, spectroscopic or astrometric data; it is not limited to any particular survey. Consequently, it can be applied to a wide range of data from both existing and future surveys.
Three-dimensional (3D) analysis of the temporomandibular joint
DEFF Research Database (Denmark)
Kitai, N.; Kreiborg, S.; Murakami, S.
Symposium Orthodontics 2001: Where are We Now? Where are We Going?, three-dimensional analysis, temporomandibular joint......Symposium Orthodontics 2001: Where are We Now? Where are We Going?, three-dimensional analysis, temporomandibular joint...
Springback prediction of three-dimensional variable curvature tube bending
National Research Council Canada - National Science Library
Zhang, Shen; Wu, Jianjun
2016-01-01
.... The springback prediction of three-dimensional variable curvature bent tube is projected on each discrete osculating and rectifying plane, and then the three-dimensional problem can be transformed into two dimensions...
Three-dimensional flows in a transonic compressor rotor
Reid, Lonnie; Celestina, Mark L.; Dewitt, Kenneth; Keith, Theo
1991-01-01
This study involves an experimental and numerical investigation of the three-dimensional flows in a transonic compressor rotor. A variety of data which could be used, in a complementary fashion, to validate/calibrate the computational fluid dynamics turbomachinery code and improve understanding of the flow physics, were acquired. Detailed radial survey data which consisted of total pressure, total temperature, static pressure and flow angle were obtained at stations upstream and downstream of the rotor blade. Detailed velocity and turbulence profiles were obtained upstream of the rotor and used as the upstream boundary conditions for the numerical analysis. Calibrated flush-mounted hot film probes were used to measure wall shear stress on the hub and casing walls upstream of the rotor. The blade-to-blade shear-stress angle distributions were obtained at two axial locations on the rotor casing, using flush-mounted hot film probes. A numerical analysis conducted using a three-dimensional Navier-Stokes code was compared with the experimental results.
Three-dimensional volumetric quantification of fat loss following cryolipolysis.
Garibyan, Lilit; Sipprell, William H; Jalian, H Ray; Sakamoto, Fernanda H; Avram, Mathew; Anderson, R Rox
2014-02-01
Cryolipolysis is a noninvasive and well-tolerated treatment for reduction of localized subcutaneous fat. Although several studies demonstrate the safety and efficacy of this procedure, volumetric fat reduction from this treatment has not been quantified. This prospective study investigated the change in volume of fat after cryolipolysis treatment using three-dimensional (3D) photography. A prospective study of subjects treated with cryolipolysis on the flank (love handle) was performed at Massachusetts General Hospital. Volume measurements were performed with a Canfield Scientific Vectra three-dimensional camera and software to evaluate the amount of post procedure volume change. Clinical outcomes were assessed with caliper measurements, subject surveys, and blinded physician assessment of photographs. Eleven subjects were enrolled in this study. Each subject underwent a single cycle of cryolipolysis to one flank. The untreated flank served as an internal control. The follow-up time after treatment was 2 months. The mean amount of calculated absolute fat volume loss using 3D photography from baseline to 2 months follow-up visit was 56.2 ± 25.6 from the treatment site and 16.6 ± 17.6 cc from the control (P fat removal methodology that on average leads to 39.6 cc of fat loss of the treated flank at 2 months after a single treatment cycle. © 2013 Wiley Periodicals, Inc.
Primary and Secondary Three Dimensional Microbatteries
Cirigliano, Nicolas
Today's MEMS devices are limited more so by the batteries that supply their power than the fabrication methods used to build them. Thick battery electrodes are capable of providing adequate energy, but long and tortuous diffusion pathways lead to low power capabilities. On the other hand, thin film batteries can operate at significant current densities but require large surface areas to supply practical energy. This dilemma can be solved by either developing new high capacity materials or by engineering new battery designs that decouple power and energy. Three dimensional batteries redesign traditional configurations to create nonplanar interfaces between battery components. This can be done by introducing hierarchical structures into the electrode shape. Designs such as these provide a maximum surface area over which chemical reactions can occur. Furthermore, by maintaining small feature sizes, ion diffusion and electronic transport distances can remain minimal. Manipulating these properties ensures fast kinetics that are required for high power situations. Energy density is maximized by layering material in the vertical direction, thus ensuring a minimal footprint area. Three dimensional carbon electrodes are fabricated using basic MEMS techniques. A silicon mold is anisotropically etched to produce channels of a predetermined diameter. The channels are then filled using an infiltration technique with electrode slurry. Once dried, the mold is attached to a current collector and etched using a XeF2 process. Electrodes of varying feature sizes have been fabricated using this method with aspect ratios ranging from 3.5:1 to 7:1. 3D carbon electrodes are shown to obtain capacities over 8 mAh/cm2 at 0.1 mA/cm2, or nearly 700% higher than planar carbon electrodes. When assembled with a planar cathode, the battery cell produced an average discharge capacity of 40 J/cm 2 at a current density of 0.2 mA/cm2. This places the energy density values slightly less than thick
Understanding three-dimensional damage envelopes
Browning, John; Harland, Sophie; Meredith, Philip; Healy, David; Mitchell, Tom
2017-04-01
Microcrack damage leading to failure in rocks evolves in response to differential loading. This loading is often visualized in a two-dimensional stress space through the use of Mohr-Coulomb diagrams. The vast majority of experimental studies investigate damage evolution and rock failure using conventional triaxial stress states (σ1 > σ2 = σ3) in which the results can be easily represented in a Mohr-Coulomb plot. However, in nature the stress state is in general truly triaxial (σ1 > σ2 > σ3) and as such comprises a 3D stress state potentially leading to more complexity. By monitoring acoustic wave velocities and acoustic emissions we have shown that damage is generated in multiple orientations depending on the loading directions and hence principal stress directions. Furthermore, crack growth is shown to be a function of differential stress regardless of the mean stress. As such, new cracks can form due to a decrease in the minimum principal stress, which reduces mean stress but increases the differential stress. Although the size of individual cracks is not affected by the intermediate principal stress it has been shown that the σ2 plays a key role in suppressing the total amount of crack growth and concentrates this damage in a single plane. Hence, the differential stress at which rocks fail (i.e. the rock strength) will be significantly increased under true triaxial stress conditions than under the much more commonly applied condition of conventional triaxial stress. Through a series of cyclic loading tests we investigated the Kaiser effect, we show that while individual stress states are important, the stress path by which this stress state is reached is equally important. Whether or not a stress state has been 'visited' before is also vitally important in determining and understanding damage envelopes. Finally, we show that damage evolution can be anisotropic and must be considered as a three-dimensional problem. It is unclear how damage envelopes
Three Dimensional CAPP Technology of Projectile Based on MBD
Directory of Open Access Journals (Sweden)
Hongzhi Zhao
2013-07-01
Full Text Available This study aims at the research goal of three-dimensional digital process design of projectile, which adopts three-dimensional computer-aided process design technology based on MBD and uses MBD to conduct parametric modeling of projectile that can reduce the input of projectile’s process information and data conversion and produce reasonable, feasible and three-dimensional projectile manufacturing process to realize paperless three-dimensional process design of projectile. The application of three-dimensional computer-assisted process design technology of projectile based on model definition can shorten the design cycle of projectile, thus improving rapid manufacturing capacity of product and reducing cost.
THEORETICAL STUDY OF THREE-DIMENSIONAL NUMERICAL MANIFOLD METHOD
Institute of Scientific and Technical Information of China (English)
LUO Shao-ming; ZHANG Xiang-wei; L(U) Wen-ge; JIANG Dong-ru
2005-01-01
The three-dimensional numerical manifold method(NMM) is studied on the basis of two-dimensional numerical manifold method. The three-dimensional cover displacement function is studied. The mechanical analysis and Hammer integral method of three-dimensional numerical manifold method are put forward. The stiffness matrix of three-dimensional manifold element is derived and the dissection rules are given. The theoretical system and the numerical realizing method of three-dimensional numerical manifold method are systematically studied. As an example, the cantilever with load on the end is calculated, and the results show that the precision and efficiency are agreeable.
Three dimensional characterization and archiving system
Energy Technology Data Exchange (ETDEWEB)
Sebastian, R.L.; Clark, R.; Gallman, P. [Coleman Research Corp., Springfield, VA (United States)] [and others
1995-10-01
The Three Dimensional Characterization and Archiving System (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. Coleman Research and its subcontractors, Thermedics Detection, Inc. (TD) and the University of Idaho (UI) are in the second phase of a three phase program to develop 3D-ICAS to support Decontamination and Decommissioning (D&D) operations. Accurate physical characterization of surfaces and the radioactive and organic is a critical D&D task. Surface characterization includes identification of potentially dangerous inorganic materials, such as asbestos and transite. The 3D-ICAS system robotically conveys a multisensor probe near the surface to be inspected. The sensor position and orientation are monitored and controlled by Coherent laser radar (CLR) tracking. The ICAS fills the need for high speed automated organic analysis by means of gas chromatography-mass spectrometry sensors, and also by radionuclide sensors which combines alpha, beta, and gamma counting.
Clinical significance of three-dimensional sonohysterography
Energy Technology Data Exchange (ETDEWEB)
Lee, Eun Hye; Lee, Mi Hwa; Lee, Chan; Kim, Jong Wook; Shin, Myung Choel [Pochon Cha University College of Medicine, Pochon (Korea, Republic of)
1999-12-15
To evaluate the usefulness of three dimensional sonohysterography (3D SHG) in the evaluation of uterine endometrial and submucosal lesions in comparison with conventional two-dimensional sonohysterography (2D SHG). Our series consisted of 26 patients (mean aged 41 years) who complained of uterine bleeding, menorrhagia, or dysmenorrhea. 2D SHG was performed, and then 3D SHG was done after the volume mode was switched on. Simultaneous display of three perpendicular two-dimensional planes and surface rendering of findings on particular section were obtained. We analyzed whether the endometrium was thickened or not, and the location, size, shape, echogenicity, posterior shadowing, and echogenic rim of the focal lesion. The results were compared with the pathologic findings or MRI. There were submucosal myomas (n=12), intramural myomas (n=2), endometrial polyps (n=7), placental polyp (n=1), and normal endometrial cavities (n=4) on SHG. Nineteen cases were confirmed by pathologic findings or MRI. The results were correlated in 89% (17/19) of the cases. We misdiagnosed 2 cases: focal endometrial hyperplasia and choriocarcinoma were misdiagnosed as endometrial polyp and placental polyp, respectively. Imaging diagnoses were same in the techniques. Comparing with 2D SHG, 3D SHG provided a subjective display of pathologic findings and an additional information about spatial relationship between focal lesion and surroundings.
Globographic visualisation of three dimensional joint angles.
Baker, Richard
2011-07-07
Three different methods for describing three dimensional joint angles are commonly used in biomechanics. The joint coordinate system and Cardan/Euler angles are conceptually quite different but are known to represent the same underlying mathematics. More recently the globographic method has been suggested as an alternative and this has proved particularly attractive for the shoulder joint. All three methods can be implemented in a number of ways leading to a choice of angle definitions. Very recently Rab has demonstrated that the globographic method is equivalent to one implementation of the joint coordinate system. This paper presents a rigorous analysis of the three different methods and proves their mathematical equivalence. The well known sequence dependence of Cardan/Euler is presented as equivalent to configuration dependence of the joint coordinate system and orientation dependence of globographic angles. The precise definition of different angle sets can be easily visualised using the globographic method using analogues of longitude, latitude and surface bearings with which most users will already be familiar. The method implicitly requires one axis of the moving segment to be identified as its principal axis and this can be extremely useful in helping define the most appropriate angle set to describe the orientation of any particular joint. Using this technique different angle sets are considered to be most appropriate for different joints and examples of this for the hip, knee, ankle, pelvis and axial skeleton are outlined.
Three dimensional characterization and archiving system
Energy Technology Data Exchange (ETDEWEB)
Sebastian, R.L.; Clark, R.; Gallman, P. [and others
1995-12-01
The Three Dimensional Characterization and Archiving System (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. Coleman Research and its subcontractors, Thermedics Detection, Inc. (TD) and the University of Idaho (UI) are in the second phase of a three phase program to develop 3D-ICAS to support Decontamination and Decommissioning (D&D) operations. Accurate physical characterization of surfaces and the radioactive and organic is a critical D&D task. Surface characterization includes identification of potentially dangerous inorganic materials, such as asbestos and transite. Real-time remotely operable characterization instrumentation will significantly advance the analysis capabilities beyond those currently employed. Chemical analysis is a primary area where the characterization process will be improved. Chemical analysis plays a vital role throughout the process of decontamination. Before clean-up operations can begin the site must be characterized with respect to the type and concentration of contaminants, and detailed site mapping must clarify areas of both high and low risk. During remediation activities chemical analysis provides a means to measure progress and to adjust clean-up strategy. Once the clean-up process has been completed the results of chemical analysis will verify that the site is in compliance with federal and local regulations.
Three Dimensional Hydrodynamic Model With Multiquadtree Meshes
Directory of Open Access Journals (Sweden)
G. P. Vanegas
2008-01-01
Full Text Available This study presents a three dimensional model for the transport of conservative contaminants, which can be used for bodies of water which are affected by winds and/or tides. The model solves the equation of mass transport, based on results obtained using a hydrodynamic model for shallow waters that works in a finite volume scheme and a type of hierarchical grid, called multi-quadtree, which is adaptable to the bathymetry. To solve the vertical coordinates, the coordinate z is transformed into a sigma (σ coordinate, thus allowing the same number of layers in the vertical, regardless of depth. This hydrodynamic model is validated using two cases: a long wave propagated in a channel of variable width and bottom and wind action in a rectangular basin. Finally, the results obtained are presented for a hypothetical single port outfall in the bay of Campeche, México. The model developed here is both quick and easy to use and is efficient when compared with models presented by other authors since it uses adaptable grids which allow detailed solutions to be obtained for areas of interest such as coastlines and the area around an outfall.
Three-dimensionally Perforated Calcium Phosphate Ceramics
Institute of Scientific and Technical Information of China (English)
无
2005-01-01
Porous calcium phosphate ceramics were produced by compression molding using a special mold followed by sintering. The porous calcium phosphate ceramics have three-dimensional and penetrated open pores380-400μm in diameter spaced at intervals of 200μm. The layers of the linear penetration pores alternately lay perpendicular to pore direction. The porosity was 59%-65% . The Ca/P molar ratios of the porous calcium phosphate ceramics range from 1.5 to 1.85. A binder containing methyl cellulose was most effective for preparing the powder compact among vinyl acetate, polyvinyl alcohol, starch, stearic acid, methyl cellulose and their mixtures. Stainless steel, polystyrene, nylon and bamboo were used as the long columnar male dies for the penetrated open pores. When polystyrene, nylon and bamboo were used as the long columnar male dies, the dies were burned out during the sintering process. Using stainless steel as the male dies with the removal of the dies before heat treatment resulted in a higher level of densification of the calcium phosphate ceramic.
Why Observable Space Is Solely Three Dimensional
Rabinowitz, Mario
2015-01-01
Quantum (and classical) binding energy considerations in n-dimensional space indicate that atoms (and planets) can only exist in three-dimensional space. This is why observable space is solely 3-dimensional. Both a novel Virial theorem analysis, and detailed classical and quantum energy calculations for 3-space circular and elliptical orbits indicate that they have no orbital binding energy in greater than 3-space. The same energy equation also excludes the possibility of atom-like bodies in strictly 1 and 2-dimensions. A prediction is made that in the search for deviations from r^-2 of the gravitational force at sub-millimeter distances such a deviation must occur at < ~ 10^-10 m (or < ~10^-12 m considering muoniom), since atoms would disintegrate if the curled up dimensions of string theory were larger than this. Callender asserts that the often-repeated claim in previous work that stable orbits are possible in only three dimensions is not even remotely established. The binding energy analysis herein ...
Three dimensional modeling of CR propagation
Gaggero, Daniele; Di Bernardo, Giuseppe; Evoli, Carmelo; Grasso, Dario
2013-01-01
We present here a major upgrade of DRAGON, a numerical package that computes the propagation of a wide set of CR species from both astrophysical and exotic origin in the Galaxy in a wide energy range from tens of MeV to tens of TeV. DRAGON takes into account all relevant processes in particular diffusion, convection, reacceleration, fragmentation and energy losses. For the first time, we present a full 3D version of DRAGON with anisotropic position-dependent diffusion. In this version, the propagation is calculated within a 3D cartesian grid and the user is able to implement realistic and structured three dimensional source, gas and regular magnetic field distributions. Moreover, it is possible to specify an arbitrary function of position and rigidity for the diffusion coefficients in the parallel and perpendicular direction to the regular magnetic field of the Galaxy. The code opens many new possibilities in the study of CR physics. In particular, we can study for the first time the impact of the spiral arm ...
Three-Dimensional Printed Graphene Foams.
Sha, Junwei; Li, Yilun; Villegas Salvatierra, Rodrigo; Wang, Tuo; Dong, Pei; Ji, Yongsung; Lee, Seoung-Ki; Zhang, Chenhao; Zhang, Jibo; Smith, Robert H; Ajayan, Pulickel M; Lou, Jun; Zhao, Naiqin; Tour, James M
2017-07-25
An automated metal powder three-dimensional (3D) printing method for in situ synthesis of free-standing 3D graphene foams (GFs) was successfully modeled by manually placing a mixture of Ni and sucrose onto a platform and then using a commercial CO2 laser to convert the Ni/sucrose mixture into 3D GFs. The sucrose acted as the solid carbon source for graphene, and the sintered Ni metal acted as the catalyst and template for graphene growth. This simple and efficient method combines powder metallurgy templating with 3D printing techniques and enables direct in situ 3D printing of GFs with no high-temperature furnace or lengthy growth process required. The 3D printed GFs show high-porosity (∼99.3%), low-density (∼0.015g cm(-3)), high-quality, and multilayered graphene features. The GFs have an electrical conductivity of ∼8.7 S cm(-1), a remarkable storage modulus of ∼11 kPa, and a high damping capacity of ∼0.06. These excellent physical properties of 3D printed GFs indicate potential applications in fields requiring rapid design and manufacturing of 3D carbon materials, for example, energy storage devices, damping materials, and sound absorption.
Chaotic Mixing in Three Dimensional Porous Media
Lester, Daniel R; Borgne, Tanguy Le
2016-01-01
Under steady flow conditions, the topological complexity inherent to all random 3D porous media imparts complicated flow and transport dynamics. It has been established that this complexity generates persistent chaotic advection via a three-dimensional (3D) fluid mechanical analogue of the baker's map which rapidly accelerates scalar mixing in the presence of molecular di?usion. Hence pore-scale fluid mixing is governed by the interplay between chaotic advection, molecular di?usion and the broad (power-law) distribution of fluid particle travel times which arise from the non-slip condition at pore walls. To understand and quantify mixing in 3D porous media, we consider these processes in a model 3D open porous network and develop a novel stretching continuous time random walk (CTRW) which provides analytic estimates of pore-scale mixing which compare well with direct numerical simulations. We ?nd that chaotic advection inherent to 3D porous media imparts scalar mixing which scales exponentially with longitudi...
Three dimensional characterization and archiving system
Energy Technology Data Exchange (ETDEWEB)
Sebastian, R.L.; Clark, R.; Gallman, P. [and others
1996-04-01
The Three Dimensional Characterization and Archiving System (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. Coleman Research and its subcontractors, Thermedics Detection, Inc. (TD) and the University of Idaho (UI) are in the second phase of a three phase program to develop 3D-ICAS to support Decontamination and Decommissioning (D and D) operations. Accurate physical characterization of surfaces and the radioactive and organic is a critical D and D task. Surface characterization includes identification of potentially dangerous inorganic materials, such as asbestos and transite. Real-time remotely operable characterization instrumentation will significantly advance the analysis capabilities beyond those currently employed. Chemical analysis is a primary area where the characterization process will be improved. The 3D-ICAS system robotically conveys a multisensor probe near the surfaces to be inspected. The sensor position and orientation are monitored and controlled using coherent laser radar (CLR) tracking. The CLR also provides 3D facility maps which establish a 3D world view within which the robotic sensor system can operate.
Three-dimensional Printing in the Intestine.
Wengerter, Brian C; Emre, Gulus; Park, Jea Young; Geibel, John
2016-08-01
Intestinal transplantation remains a life-saving option for patients with severe intestinal failure. With the advent of advanced tissue engineering techniques, great strides have been made toward manufacturing replacement tissues and organs, including the intestine, which aim to avoid transplant-related complications. The current paradigm is to seed a biocompatible support material (scaffold) with a desired cell population to generate viable replacement tissue. Although this technique has now been extended by the three-dimensional (3D) printing of geometrically complex scaffolds, the overall approach is hindered by relatively slow turnover and negative effects of residual scaffold material, which affects final clinical outcome. Methods recently developed for scaffold-free 3D bioprinting may overcome such obstacles and should allow for rapid manufacture and deployment of "bioprinted organs." Much work remains before 3D bioprinted tissues can enter clinical use. In this brief review we examine the present state and future perspectives of this nascent technology before full clinical implementation.
Application of Simulated Three Dimensional CT Image in Orthognathic Surgery
Energy Technology Data Exchange (ETDEWEB)
Kim, Hyun Don; Park, Chang Seo [Dept. of Dental Radiology, College of Dentistry, Yensei University, Seoul (Korea, Republic of); Yoo, Sun Kook; Lee, Kyoung Sang [Dept. of Medical Engineering, College of Medicine, Yensei University, Seoul (Korea, Republic of)
1998-08-15
In orthodontics and orthognathic surgery, cephalogram has been routine practice in diagnosis and treatment evaluation of craniofacial deformity. But its inherent distortion of actual length and angles during projecting three dimensional object to two dimensional plane might cause errors in quantitative analysis of shape and size. Therefore, it is desirable that three dimensional object is diagnosed and evaluated three dimensionally and three dimensional CT image is best for three dimensional analysis. Development of clinic necessitates evaluation of result of treatment and comparison before and after surgery. It is desirable that patient that was diagnosed and planned by three dimensional computed tomography before surgery is evaluated by three dimensional computed tomography after surgery, too. But Because there is no standardized normal values in three dimension now and three dimensional Computed Tomography needs expensive equipment and because of its expenses and amount of exposure to radiation, limitations still remain to be solved in its application to routine practice. If postoperative three dimensional image is constructed by pre and postoperative lateral and postero-anterior cephalograms and preoperative three dimensional computed tomogram, pre and postoperative image will be compared and evaluated three dimensionally without three dimensional computed tomography after surgery and that will contribute to standardize normal values in three dimension. This study introduced new method that computer-simulated three dimensional image was constructed by preoperative three dimensional computed tomogram and pre and postoperative lateral and postero-anterior cephalograms, and for validation of new method, in four cases of dry skull that position of mandible was displaced and four patients of orthognathic surgery, computer-simulated three dimensional image and actual postoperative three dimensional image were compared. The results were as follows. 1. In four cases of
Three-dimensional Spontaneous Magnetic Reconnection
Beresnyak, Andrey
2017-01-01
Magnetic reconnection is best known from observations of the Sun where it causes solar flares. Observations estimate the reconnection rate as a small, but non-negligible fraction of the Alfvén speed, so-called fast reconnection. Until recently, the prevailing pictures of reconnection were either of resistivity or plasma microscopic effects, which was contradictory to the observed rates. Alternative pictures were either of reconnection due to the stochasticity of magnetic field lines in turbulence or the tearing instability of the thin current sheet. In this paper we simulate long-term three-dimensional nonlinear evolution of a thin, planar current sheet subject to a fast oblique tearing instability using direct numerical simulations of resistive-viscous magnetohydrodynamics. The late-time evolution resembles generic turbulence with a ‑5/3 power spectrum and scale-dependent anisotropy, so we conclude that the tearing-driven reconnection becomes turbulent reconnection. The turbulence is local in scale, so microscopic diffusivity should not affect large-scale quantities. This is confirmed by convergence of the reconnection rate toward ∼ 0.015{v}{{A}} with increasing Lundquist number. In this spontaneous reconnection, with mean field and without driving, the dissipation rate per unit area also converges to ∼ 0.006ρ {v}{{A}}3, and the dimensionless constants 0.015 and 0.006 are governed only by self-driven nonlinear dynamics of the sheared magnetic field. Remarkably, this also means that a thin current sheet has a universal fluid resistance depending only on its length to width ratio and to {v}{{A}}/c.
Three-dimensional, dynamic meteorology of Titan
Mitchell, J.; Adamkovics, M.; Caballero, R.; Turtle, E. P.; Arias, T.; Sayanagi, K. M.
2011-12-01
Titan exhibits an active weather cycle involving methane. Because of low insolation and a stabilizing antigreenhouse effect [McKay et al. 1989], moist convection on Titan cannot be maintained purely through surface evaporative fluxes, indicating that moisture convergence provided by large-scale modes of circulation is important for convective cloud formation [e.g., Mitchell et al. 2006; Barth & Rafkin 2010]. Recent Cassini Imaging Science Subsystem (ISS) images of Titan have revealed large-scale clouds with an interesting array of morphologies and characteristics. Most strikingly, an arrow-shaped cloud oriented eastward was observed at the equator on 27 September 2010 [Turtle et al. 2011a], followed by observations of surface wetting which gradually diminished over several months [Turtle et al. 2011b]. We demonstrate a process for the physical interpretation of individual observed storms and their aggregate effect on surface erosion through a combined analysis of cloud observations and simulations [Mitchell et al. in press]. We show that planetary-scale Kelvin waves naturally arising in a new, three-dimensional version of our Titan general circulation model (GCM) robustly organize convection into chevron-shaped storms at Titan's equator during the current season, as observed. The phasing of this mode with another, much slower one causes a 20-fold increase in precipitation rates over the average, each producing up to several centimeters of precipitation over 1000-km-scale regions, with important implications for observed fluvial features [Langhans et al. 2011]. Our initial results indicate an essential role for planetary-scale atmospheric waves in organizing Titan's methane weather. I will discuss prospects for extending our analysis to other Titan observations.
Measurements using three-dimensional product imaging
Directory of Open Access Journals (Sweden)
A. Sioma
2010-07-01
Full Text Available This article discusses a method of creating a three-dimensional cast model using vision systems and how that model can be used in thequality assessment process carried out directly on the assembly line. The technology of active vision, consisting in illumination of theobject with a laser beam, was used to create the model. Appropriate configuration of camera position geometry and laser light allows thecollection of height profiles and construction of a 3D model of the product on their basis. The article discusses problems connected with the resolution of the vision system, resolution of the laser beam analysis, and resolution connected with the application of the successive height profiles on sample cast planes. On the basis of the model, measurements allowing assessment of dimension parameters and surface defects of a given cast are presented. On the basis of tests and analyses of such a threedimensional cast model, a range of checks which are possible to conduct using 3D vision systems is indicated.Testing casts using that technology allows rapid assessment of selected parameters. Construction of the product’s model and dimensional assessment take a few seconds, which significantly reduces the duration of checks in the technological process. Depending on the product, a few checks may be carried out simultaneously on the product’s model.The possibility of controlling all outgoing products, and creating and modifying the product parameter control program, makes the solutionhighly flexible, which is confirmed by pilot industrial implementations. The technology will be developed in terms of detection andidentification of surface defects. It is important due to the possibility of using such information for the purposes of selecting technologicalprocess parameters and observing the effect of changes in selected parameters on the cast parameter controlled in a vision system.
Three-dimensional kinematics of hummingbird flight.
Tobalske, Bret W; Warrick, Douglas R; Clark, Christopher J; Powers, Donald R; Hedrick, Tyson L; Hyder, Gabriel A; Biewener, Andrew A
2007-07-01
Hummingbirds are specialized for hovering flight, and substantial research has explored this behavior. Forward flight is also important to hummingbirds, but the manner in which they perform forward flight is not well documented. Previous research suggests that hummingbirds increase flight velocity by simultaneously tilting their body angle and stroke-plane angle of the wings, without varying wingbeat frequency and upstroke: downstroke span ratio. We hypothesized that other wing kinematics besides stroke-plane angle would vary in hummingbirds. To test this, we used synchronized high-speed (500 Hz) video cameras and measured the three-dimensional wing and body kinematics of rufous hummingbirds (Selasphorus rufus, 3 g, N=5) as they flew at velocities of 0-12 m s(-1) in a wind tunnel. Consistent with earlier research, the angles of the body and the stroke plane changed with velocity, and the effect of velocity on wingbeat frequency was not significant. However, hummingbirds significantly altered other wing kinematics including chord angle, angle of attack, anatomical stroke-plane angle relative to their body, percent of wingbeat in downstroke, wingbeat amplitude, angular velocity of the wing, wingspan at mid-downstroke, and span ratio of the wingtips and wrists. This variation in bird-centered kinematics led to significant effects of flight velocity on the angle of attack of the wing and the area and angles of the global stroke planes during downstroke and upstroke. We provide new evidence that the paths of the wingtips and wrists change gradually but consistently with velocity, as in other bird species that possess pointed wings. Although hummingbirds flex their wings slightly at the wrist during upstroke, their average wingtip-span ratio of 93% revealed that they have kinematically ;rigid' wings compared with other avian species.
[Three-dimensional reconstruction of heart valves].
Flachskampf, F A; Kühl, H; Franke, A; Frielingsdorf, J; Klues, H; Krebs, W; Hanrath, P
1995-08-01
The reconstruction of three-dimensional data sets from two-dimensional echocardiographic images offers several fundamental advantages: 1. more complete data than present in the few standard 2D-view; 2. off-line generation of any desired plane, cut, or perspective after the data set has been acquired; 3. access to quantitative parameters like surface areas (e.g., of valve leaflets or portions of leaflets), volumes, and others, without geometric assumptions. The mitral valve has been the focus of several studies using various techniques of reconstruction of transthoracic or transesophageal images. These studies have shown the mitral annulus to be a non-planar, "saddle-shaped" structure, with an average distance of highest to lowest points of 14 mm in normals. This recognition of mitral annular non-planarity has led to a more stringent echocardiographic definition of mitral valve prolapse. Further studies have shown systolic shrinkage of mitral annular area by about 30% and systolic apico-basal translation of the annulus by approximately 1 cm in normals. In patients with dilated cardiomyopathy, the annulus is flattened, and both cyclic change in annular area and apico-basal translation are significantly reduced. 3D-studies of the left ventricular outflow tract in hypertrophic obstructive cardiomyopathy allow measurement of outflow tract and leaflet surface areas and dynamic spatial visualization of systolic anterior motion of the anterior mitral leaflet. Automated techniques to reconstruct the full grey value data set from a high number of parallel or rotational transesophageal planes allow impressive visualization of normal and diseased mitral and aortic valves or valve prostheses, with special emphasis on generating "surgical" views and perspectives, which cannot be obtained by conventional tomographic imaging.(ABSTRACT TRUNCATED AT 250 WORDS)
Defining Modules, Modularity and Modularization
DEFF Research Database (Denmark)
Miller, Thomas Dedenroth; Pedersen, Per Erik Elgård
The paper describes the evolution of the concept of modularity in a historical perspective. The main reasons for modularity are: create variety, utilize similarities, and reduce complexity. The paper defines the terms: Module, modularity, and modularization.......The paper describes the evolution of the concept of modularity in a historical perspective. The main reasons for modularity are: create variety, utilize similarities, and reduce complexity. The paper defines the terms: Module, modularity, and modularization....
Tai, K-H; Duchesne, G; Turner, S; Kneebone, A; See, A; Gogna, K; Berry, M
2004-12-01
There is an increasing use of 3-D conformal radiotherapy (3DCRT) in the radiotherapeutic management of prostate cancer. The Faculty of Radiation Oncology Genito-Urinary Group carried out a survey of Australian and New Zealand radiotherapy centres in the preparation of a consensus workshop. Of the 19 centres that were represented, there were 24 radiation oncologists, 16 radiation therapists and 12 medical physicists. The survey collected demographic information and data on the practices undertaken at those centres when delivering curative radiotherapy in the treatment of prostate cancer. There was much variation in the delivery of treatment in the areas of patient set-up, contouring of target volumes and organs of interest during computer planning, the techniques and the dose constraints used in these techniques, the use of adjuvant androgen deprivation therapy and the quality assurance processes used in monitoring effects of treatment. This variability reflects the range of data in the published literature. Emerging trends of practices were also identified. This is a first report on a multi-disciplinary approach to the development of guidelines in 3DCRT of prostate cancer.
Airway branching morphogenesis in three dimensional culture
Directory of Open Access Journals (Sweden)
Gudjonsson Thorarinn
2010-11-01
Full Text Available Abstract Background Lungs develop from the fetal digestive tract where epithelium invades the vascular rich stroma in a process called branching morphogenesis. In organogenesis, endothelial cells have been shown to be important for morphogenesis and the maintenance of organ structure. The aim of this study was to recapitulate human lung morphogenesis in vitro by establishing a three dimensional (3D co-culture model where lung epithelial cells were cultured in endothelial-rich stroma. Methods We used a human bronchial epithelial cell line (VA10 recently developed in our laboratory. This cell line cell line maintains a predominant basal cell phenotype, expressing p63 and other basal markers such as cytokeratin-5 and -14. Here, we cultured VA10 with human umbilical vein endothelial cells (HUVECs, to mimic the close interaction between these cell types during lung development. Morphogenesis and differentiation was monitored by phase contrast microscopy, immunostainings and confocal imaging. Results We found that in co-culture with endothelial cells, the VA10 cells generated bronchioalveolar like structures, suggesting that lung epithelial branching is facilitated by the presence of endothelial cells. The VA10 derived epithelial structures display various complex patterns of branching and show partial alveolar type-II differentiation with pro-Surfactant-C expression. The epithelial origin of the branching VA10 colonies was confirmed by immunostaining. These bronchioalveolar-like structures were polarized with respect to integrin expression at the cell-matrix interface. The endothelial-induced branching was mediated by soluble factors. Furthermore, fibroblast growth factor receptor-2 (FGFR-2 and sprouty-2 were expressed at the growing tips of the branching structures and the branching was inhibited by the FGFR-small molecule inhibitor SU5402. Discussion In this study we show that a human lung epithelial cell line can be induced by endothelial cells to
Three-dimensional nonlinear acoustical holography
Niu, Yaying
Nearfield Acoustical Holography (NAH) is an acoustic field visualization technique that can be used to reconstruct three-dimensional (3-D) acoustic fields by projecting two-dimensional (2-D) data measured on a hologram surface. However, linear NAH algorithms developed and improved by many researchers can result in significant reconstruction errors when they are applied to reconstruct 3-D acoustic fields that are radiated from a high-level noise source and include significant nonlinear components. Here, planar, nonlinear acoustical holography procedures are developed that can be used to reconstruct 3-D, nonlinear acoustic fields radiated from a high-level noise source based on 2-D acoustic pressure data measured on a hologram surface. The first nonlinear acoustic holography procedure is derived for reconstructing steady-state acoustic pressure fields by applying perturbation and renormalization methods to nonlinear, dissipative, pressure-based Westervelt Wave Equation (WWE). The nonlinear acoustic pressure fields radiated from a high-level pulsating sphere and an infinite-size, vibrating panel are used to validate this procedure. Although the WWE-based algorithm is successfully validated by those two numerical simulations, it still has several limitations: (1) Only the fundamental frequency and its second harmonic nonlinear components can be reconstructed; (2) the application of this algorithm is limited to mono-frequency source cases; (3) the effects of bent wave rays caused by transverse particle velocities are not included; (4) only acoustic pressure fields can be reconstructed. In order to address the limitations of the steady-state, WWE-based procedure, a transient, planar, nonlinear acoustic holography algorithm is developed that can be used to reconstruct 3-D nonlinear acoustic pressure and particle velocity fields. This procedure is based on Kuznetsov Wave Equation (KWE) that is directly solved by using temporal and spatial Fourier Transforms. When compared
The Three-dimensional Digital Factory for Shipbuilding Technology Research
Directory of Open Access Journals (Sweden)
Xu Wei
2016-01-01
Full Text Available The three-dimensional digital factory technology research is the hotspot in shipbuilding recently. The three-dimensional digital factory technology not only focus on design the components of the product, but also discuss on the simulation and analyses of the production process.Based on the three-dimensional model, the basic data layer, application control layer and the presentation layer of hierarchical structure are established in the three-dimensional digital factory of shipbuilding in this paper. And the key technologies of three-dimensional digital factory of shipbuilding are analysed. Finally, a case study is applied and the results show that the three-dimensional digital factory will play an important role in the future.
Three-dimensional decomposition method of global atmospheric circulation
Institute of Scientific and Technical Information of China (English)
LIU HaiTao; HU ShuJuan; XU Ming; CHOU JiFan
2008-01-01
By adopting the idea of three-dimensional Walker, Hadley and Rossby stream functions, the global atmospheric circulation can be considered as the sum of three stream functions from a global perspective. Therefore, a mathematical model of three-dimensional decomposition of global atmospheric circulation is proposed and the existence and uniqueness of the model are proved. Besides, the model includes a numerical method leading to no truncation error in the discrete three-dimensional grid points. Results also show that the three-dimensional stream functions exist and are unique for a given velocity field. The mathematical model shows the generalized form of three-dimensional stream functions equal to the velocity field in representing the features of atmospheric motion. Besides, the vertical velocity calculated through the model can represent the main characteristics of the vertical motion. In sum, the three-dimensional decomposition of atmospheric circulation is convenient for the further investigation of the features of global atmospheric motions.
Three-dimensional carbon nanotube based photovoltaics
Flicker, Jack
2011-12-01
Photovoltaic (PV) cells with a three dimensional (3D) morphology are an exciting new research thrust with promise to create cheaper, more efficient solar cells. This work introduces a new type of 3D PV device based on carbon nanotube (CNT) arrays. These arrays are paired with the thin film heterojunction, CdTe/CdS, to form a complete 3D carbon nanotube PV device (3DCNTPV). Marriage of a complicated 3D structure with production methods traditionally used for planar CdTe solar cell is challenging. This work examines the problems associated with processing these types of cells and systematically alters production methods of the semiconductor layers and electrodes to increase the short circuit current (Isc), eliminate parasitic shunts, and increase the open circuit voltage (Voc). The main benefit of 3D solar cell is the ability to utilize multiple photon interactions with the solar cell surface. The three dimensionality allows photons to interact multiple times with the photoactive material, which increases the absorption and the overall power output over what is possible with a two dimensional (2D) morphology. To quantify the increased power output arising from these multiple photon interactions, a new absorption efficiency term, eta3D, is introduced. The theoretical basis behind this new term and how it relates to the absorption efficiency of a planar cell, eta 2D, is derived. A unique model for the average number of multiple photon impingements, Gamma, is proposed based on three categories of 3D morphology: an infinite trench, an enclosed box, and an array of towers. The derivation of eta3D and Gamma for these 3D PV devices gives a complete picture of the enhanced power output over 2D cells based on CNT array height, pitch, radius, and shape. This theory is validated by monte carlo simulations and experiment. This new type of 3D PV devices has been shown to work experimentally. The first 3DCNTPV cells created posses Isc values of 0.085 to 17.872mA/cm2 and Voc values
THREE DIMENSIONAL PRINTING IN THE SOUTH AFRICAN INDUSTRIAL ENVIRONMENT
Directory of Open Access Journals (Sweden)
D. Dimitrov
2012-01-01
Full Text Available
ENGLISH ABSTRACT: The current development of the rapid prototyping industry in South Africa is characterised by the strong dominance and fast growth in sales of three dimensional printers. Although it reflects the international trend, it seems that the industrial community lacks a clear appreciation of the real strength of this technology, especially with respect to the large variety of devices available today on the market. This paper surveys the current state and capabilities of three dimensional printing (3DP. Based on its technical background – the ink-jet printing known from the printer and plotter industry – a classification structure is developed and proposed. Different printing techniques and process concepts, together with their advantages and limitations, are described and analysed. Typical examples from three completely different application areas – manufacturing, medicine, and architecture – are presented and discussed. Some basic considerations for an informed selection of the right technology for a particular application are then presented.
AFRIKAANSE OPSOMMING: Sterk groei in die verkope van drie dimensionele drukkers (3DP kenmerk die onlangse groei in die snelle prototipe industrie in Suid-Afrika. Ten spyte daarvan dat hierdie ‘n internasionale tendens reflekteer, blyk dit dat die werklike waarde van die tegnologie nog nie ten volle waardeer word in die industriële gemeenskap nie, veral aangesien daar so ‘n groot verskeidenheid masjiene in die mark beskikbaar is. ‘n Oorsig oor die huidige stand en vermoë van drie dimensionele drukkers word hier gegee. ‘n Klassifikasiestruktuur – gebaseer op die inkspuitdrukkertegnologie – word ontwikkel en voorgestel. Verskillende druktegnieke en konsepprosesse word ontleed. Daar word ook gekyk na die voor- en nadele hiervan. Tipiese voorbeelde van drie verskillende toepassings (vervaardiging, medies, en argitektuur word aangebied en bespreek. Basiese riglyne vir
Three-Dimensional Gear Crack Propagation Studied
Lewicki, David G.
1999-01-01
Gears used in current helicopters and turboprops are designed for light weight, high margins of safety, and high reliability. However, unexpected gear failures may occur even with adequate tooth design. To design an extremely safe system, the designer must ask and address the question, "What happens when a failure occurs?" With gear-tooth bending fatigue, tooth or rim fractures may occur. A crack that propagates through a rim will be catastrophic, leading to disengagement of the rotor or propeller, loss of an aircraft, and possible fatalities. This failure mode should be avoided. A crack that propagates through a tooth may or may not be catastrophic, depending on the design and operating conditions. Also, early warning of this failure mode may be possible because of advances in modern diagnostic systems. One concept proposed to address bending fatigue fracture from a safety aspect is a splittooth gear design. The prime objective of this design would be to control crack propagation in a desired direction such that at least half of the tooth would remain operational should a bending failure occur. A study at the NASA Lewis Research Center analytically validated the crack-propagation failsafe characteristics of a split-tooth gear. It used a specially developed three-dimensional crack analysis program that was based on boundary element modeling and principles of linear elastic fracture mechanics. Crack shapes as well as the crack-propagation life were predicted on the basis of the calculated stress intensity factors, mixed-mode crack-propagation trajectory theories, and fatigue crack-growth theories. The preceding figures show the effect of the location of initial cracks on crack propagation. Initial cracks in the fillet of the teeth produced stress intensity factors of greater magnitude (and thus, greater crack growth rates) than those in the root or groove areas of the teeth. Crack growth was simulated in a case study to evaluate crack-propagation paths. Tooth
Survey of modular ontology techniques and their applications in the biomedical domain.
Pathak, Jyotishman; Johnson, Thomas M; Chute, Christopher G
2009-08-01
In the past several years, various ontologies and terminologies such as the Gene Ontology have been developed to enable interoperability across multiple diverse medical information systems. They provide a standard way of representing terms and concepts thereby supporting easy transmission and interpretation of data for various applications. However, with their growing utilization, not only has the number of available ontologies increased considerably, but they are also becoming larger and more complex to manage. Toward this end, a growing body of work is emerging in the area of modular ontologies where the emphasis is on either extracting and managing "modules" of an ontology relevant to a particular application scenario (ontology decomposition) or developing them independently and integrating into a larger ontology (ontology composition). In this paper, we investigate state-of-the-art approaches in modular ontologies focusing on techniques that are based on rigorous logical formalisms as well as well-studied graph theories. We analyze and compare how such approaches can be leveraged in developing tools and applications in the biomedical domain. We conclude by highlighting some of the limitations of the modular ontology formalisms and put forward additional requirements to steer their future development.
Three-dimensional simulations of resistance spot welding
DEFF Research Database (Denmark)
Nielsen, Chris Valentin; Zhang, Wenqi; Perret, William
2014-01-01
This paper draws from the fundamentals of electro-thermo-mechanical coupling to the main aspects of finite element implementation and three-dimensional modelling of resistance welding. A new simulation environment is proposed in order to perform three-dimensional simulations and optimization of r...
Three-dimensional Reciprocal Structures: Morphology, Concepts, Generative Rules
DEFF Research Database (Denmark)
Parigi, Dario; Pugnale, Alberto
2012-01-01
This paper present seven different three dimensional structures based on the principle of structural reciprocity with superimposition joint and standardized un-notched elements. Such typology could be regarded as being intrinsically three-dimensional because elements sit one of the top of the oth...
Collapse in a forced three-dimensional nonlinear Schrodinger equation
DEFF Research Database (Denmark)
Lushnikov, P.M.; Saffman, M.
2000-01-01
We derive sufficient conditions for the occurrence of collapse in a forced three-dimensional nonlinear Schrodinger equation without dissipation. Numerical studies continue the results to the case of finite dissipation.......We derive sufficient conditions for the occurrence of collapse in a forced three-dimensional nonlinear Schrodinger equation without dissipation. Numerical studies continue the results to the case of finite dissipation....
Synthetic Spectrum Methods for Three-Dimensional Supernova Models
Thomas, R C
2003-01-01
Current observations stimulate the production of fully three-dimensional explosion models, which in turn motivates three-dimensional spectrum synthesis for supernova atmospheres. We briefly discuss techniques adapted to address the latter problem, and consider some fundamentals of line formation in supernovae without recourse to spherical symmetry. Direct and detailed extensions of the technique are discussed, and future work is outlined.
Semifolded Localized Structures in Three-Dimensional Soliton Systems
Institute of Scientific and Technical Information of China (English)
FANG Jian-Ping; ZHENG Chun-Long; CHEN Li-Qun
2004-01-01
By means ora Painlevé-Backlund transformation and a multi-linear variable separation approach, abundant localized coherent excitations of the three-dimensional Broer-Kaup-Kupershmidt system with variable coefficients are derived. There are possible phase shifts for the interactions of the three-dimensional novel localized structures discussed in this paper.
Semifolded Localized Structures in Three-Dimensional Soliton Systems
Institute of Scientific and Technical Information of China (English)
FANGJian-Ping; ZHENGChun-Long; CHENLi-Qun
2004-01-01
By means ofa Painlev6 Backlund transformation and a multi-linear variable separation approach, abundant localized coherent excitations of the three-dimensional Broer Kaup Kupershmidt system with variable coeft~cients are derived. There are possible phase shifts for the interactions of the three-dimensional novel localized structures discussed in this paper.
Computer-Generated, Three-Dimensional Character Animation.
Van Baerle, Susan Lynn
This master's thesis begins by discussing the differences between 3-D computer animation of solid three-dimensional, or monolithic, objects, and the animation of characters, i.e., collections of movable parts with soft pliable surfaces. Principles from two-dimensional character animation that can be transferred to three-dimensional character…
Three dimensional periodic foundations for base seismic isolation
Yan, Y.; Cheng, Z.; Menq, F.; Mo, Y. L.; Tang, Y.; Shi, Z.
2015-07-01
Based on the concept of phononic crystals, periodic foundations made of periodic materials are investigated in this paper. The periodic foundations can provide low frequency band gaps, which cover the main frequency ranges of seismic waves. Therefore, the periodic foundations are able to protect the upper structures during earthquake events. In this paper, the basic theory of three dimensional periodic foundations is studied and the finite element method was used to conduct the sensitivity study. A simplified three-dimensional periodic foundation with a superstructure was tested in the field and the feasibility of three dimensional periodic foundations was proved. The test results showed that the response of the upper structure with the three dimensional periodic foundation was reduced under excitation waves with the main frequency falling in the attenuation zones. The finite element analysis results are consistent with the experimental data, indicating that three dimensional periodic foundations are a feasible way of reducing seismic vibrations.
Virtual three-dimensional blackboard: three-dimensional finger tracking with a single camera.
Wu, Andrew; Hassan-Shafique, Khurram; Shah, Mubarak; da Vitoria Lobo, N
2004-01-10
We present a method for three-dimensional (3D) tracking of a human finger from a monocular sequence of images. To recover the third dimension from the two-dimensional images, we use the fact that the motion of the human arm is highly constrained owing to the dependencies between elbow and forearm and the physical constraints on joint angles. We use these anthropometric constraints to derive a 3D trajectory of a gesticulating arm. The system is fully automated and does not require human intervention. The system presented can be used as a visualization tool, as a user-input interface, or as part of some gesture-analysis system in which 3D information is important.
Ahlfeld, David P.; Barlow, Paul M.; Mulligan, Anne E.
2005-01-01
GWM is a Ground?Water Management Process for the U.S. Geological Survey modular three?dimensional ground?water model, MODFLOW?2000. GWM uses a response?matrix approach to solve several types of linear, nonlinear, and mixed?binary linear ground?water management formulations. Each management formulation consists of a set of decision variables, an objective function, and a set of constraints. Three types of decision variables are supported by GWM: flow?rate decision variables, which are withdrawal or injection rates at well sites; external decision variables, which are sources or sinks of water that are external to the flow model and do not directly affect the state variables of the simulated ground?water system (heads, streamflows, and so forth); and binary variables, which have values of 0 or 1 and are used to define the status of flow?rate or external decision variables. Flow?rate decision variables can represent wells that extend over one or more model cells and be active during one or more model stress periods; external variables also can be active during one or more stress periods. A single objective function is supported by GWM, which can be specified to either minimize or maximize the weighted sum of the three types of decision variables. Four types of constraints can be specified in a GWM formulation: upper and lower bounds on the flow?rate and external decision variables; linear summations of the three types of decision variables; hydraulic?head based constraints, including drawdowns, head differences, and head gradients; and streamflow and streamflow?depletion constraints. The Response Matrix Solution (RMS) Package of GWM uses the Ground?Water Flow Process of MODFLOW to calculate the change in head at each constraint location that results from a perturbation of a flow?rate variable; these changes are used to calculate the response coefficients. For linear management formulations, the resulting matrix of response coefficients is then combined with other
Robust three dimensional surface contouring method with digital holography
Institute of Scientific and Technical Information of China (English)
YUAN Cao-jin; ZHAI Hong-chen; WANG Xiao-lei; WU Lan
2006-01-01
In this paper,a digital holography system with short-coherence light source is used to record a series of holograms of a micro-object. The three dimensional reconstruction is completed by the least-square-polynomial-fitting with a series of two dimensional intensity images which are obtained through holographic reconstruction. This three dimensional reconstruction method can be used to carry out three-dimensional reconstruction of a micro-object with strong laser speckle noise,which can not be obtained from the conventional method.
Cylindrical Three-Dimensional Porous Anodic Alumina Networks
Directory of Open Access Journals (Sweden)
Pedro M. Resende
2016-11-01
Full Text Available The synthesis of a conformal three-dimensional nanostructure based on porous anodic alumina with transversal nanopores on wires is herein presented. The resulting three-dimensional network exhibits the same nanostructure as that obtained on planar geometries, but with a macroscopic cylindrical geometry. The morphological analysis of the nanostructure revealed the effects of the initial defects on the aluminum surface and the mechanical strains on the integrity of the three-dimensional network. The results evidence the feasibility of obtaining 3D porous anodic alumina on non-planar aluminum substrates.
Three Dimensional Topological Field Theory induced from Generalized Complex Structure
Ikeda, N
2004-01-01
We construct a three-dimensional topological sigma model which is induced from a generalized complex structure on a target generalized complex manifold. This model is constructed from maps from a three-dimensional manifold $X$ to an arbitrary generalized complex manifold $M$. The theory is invariant under the diffeomorphism on the world volume and the $b$-transformation on the generalized complex structure. Moreover the model is manifestly invariant under the mirror symmetry. We derive from this model the Zucchini's two dimensional topological sigma model with a generalized complex structure as a boundary action on $\\partial X$. As a special case, we obtain three dimensional realization of a WZ-Poisson manifold.
Protein conformation in solution by three-dimensional fluorescence spectrometry
Institute of Scientific and Technical Information of China (English)
鄢远; 许金钩; 陈国珍
1996-01-01
The conformations of bovine serum albumin (USA) and egg albumin (EA) in solution and their conformation changes under different conditions were studied by using three-dimensional fluorescence spectrometry (TDFS) such as three-dimensional fluorescence (TDF) spectra and three-dimensional fluorescence polarization (TDFP) spectra with tryptophan residues in protein molecules as an intrinsic fluorescent probe. The results show that the microenvironment of tryptophan residues of protein molecules in various solutions can be directly indicated and TDFS is an effective tool for studying protein conformation in solution. Meantime, some valuable results were obtained.
DEVELOPMENT OF A HYBRID MODEL FOR THREE-DIMENSIONAL GIS
Institute of Scientific and Technical Information of China (English)
无
2000-01-01
This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulat ed Irregular Network (TIN) and octree models are integrated in this hybrid model. The TIN model works as a surface-based model which mainly serves for surface presentation and visualization. On the other hand, the octree encoding supports volumetric analysis. The designed data structure brings a major advantage in the three-dimensional selective retrieval. This technique increases the efficiency of three-dimensional data operation.
Interactive dynamic three-dimensional scene for the ground-based three-dimensional display
Hou, Peining; Sang, Xinzhu; Guo, Nan; Chen, Duo; Yan, Binbin; Wang, Kuiru; Dou, Wenhua; Xiao, Liquan
2016-10-01
Three-dimensional (3D) displays provides valuable tools for many fields, such as scientific experiment, education, information transmission, medical imaging and physical simulation. Ground based 360° 3D display with dynamic and controllable scene can find some special applications, such as design and construction of buildings, aeronautics, military sand table and so on. It can be utilized to evaluate and visualize the dynamic scene of the battlefield, surgical operation and the 3D canvas of art. In order to achieve the ground based 3D display, the public focus plane should be parallel to the camera's imaging planes, and optical axes should be offset to the center of public focus plane in both vertical and horizontal directions. Virtual cameras are used to display 3D dynamic scene with Unity 3D engine. Parameters of virtual cameras for capturing scene are designed and analyzed, and locations of virtual cameras are determined by the observer's eye positions in the observing space world. An interactive dynamic 3D scene for ground based 360° 3D display is demonstrated, which provides high-immersion 3D visualization.
Surgical accuracy of three-dimensional virtual planning
DEFF Research Database (Denmark)
Stokbro, Kasper; Aagaard, Esben; Torkov, Peter
2016-01-01
This retrospective study evaluated the precision and positional accuracy of different orthognathic procedures following virtual surgical planning in 30 patients. To date, no studies of three-dimensional virtual surgical planning have evaluated the influence of segmentation on positional accuracy ...
Magnetic structure of two- and three-dimensional supramolecular compounds
Energy Technology Data Exchange (ETDEWEB)
Decurtins, S.; Schmalle, H.W.; Pellaux, R. [Zurich Univ. (Switzerland); Fischer, P.; Fauth, F. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Ouladdiaf, B. [Institut Max von Laue - Paul Langevin, 75 - Paris (France)
1997-09-01
Supramolecular chiral networks of oxalato-bridged transition metals show either two- or three-dimensional structural features. The magnetic structures of such compounds have been investigated by means of elastic neutron powder diffraction. (author) 2 figs., 2 refs.
Direct Linear Transformation Method for Three-Dimensional Cinematography
Shapiro, Robert
1978-01-01
The ability of Direct Linear Transformation Method for three-dimensional cinematography to locate points in space was shown to meet the accuracy requirements associated with research on human movement. (JD)
Study on three-dimensional freehand stroke creation
Directory of Open Access Journals (Sweden)
Cuixian Xuan
2015-05-01
Full Text Available The automotive frames that can be created consciously with three-dimensional freehand strokes are quite important and useful in the early stage of automotive styling. However, all the strokes are drawn on the screen in two-dimensional. This study focuses on the creation of three-dimensional freehand strokes by applying the interpolation algorithm in two orthogonal planes, the projection algorithm and the resultant matrix algorithm. The fitting algorithms of strokes have been developed as the bridges between the traditional two-dimensional sketching and three-dimensional digital modeling. The stylists could use the digital tablet and pen to sketch the frames or outlines of a vehicle in three-dimensional space and then those could be used for establishing the automotive surfaces in any engineering software.
Magnetic structure of two- and three-dimensional supramolecular compounds
Energy Technology Data Exchange (ETDEWEB)
Decurtins, S.; Schmalle, H.W.; Pellaux, R. [Zurich Univ. (Switzerland); Fischer, P.; Fauth, F. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Ouladdiaf, B. [Institut Max von Laue - Paul Langevin, 75 - Paris (France)
1997-09-01
Supramolecular chiral networks of oxalato-bridged transition metals show either two- or three-dimensional structural features. The magnetic structures of such compounds have been investigated by means of elastic neutron powder diffraction. (author) 2 figs., 2 refs.
Three-Dimensional Measurement and Reconstruction of Fabric Drape Shape
Institute of Scientific and Technical Information of China (English)
SHEN Yi; YIN Hong-yuan; LIU Xuan-mu
2007-01-01
This paper introduces a new method of measuring the three-dimensional drape shape of fabrics with structural light. First, we apply parallel annular structural light to form light and shade alternating contour stripes on the surface of fabrics. We then collect the images of contour stripes using Charge Coupled Device (CCD). Subsequently, we process the images to identify the contour stripes and edges of fabrics, and obtain the fabric contour lines of curved surfaces. Finally, we apply three-dimensional curved surface modeling method based on a network of polar coordinates, and reconstruct the three-dimensional drape shape of fabrics. Experiments show that our method is effective in testing and reconstructing three-dimensional drape shape of fabrics.
Standalone visualization tool for three-dimensional DRAGON geometrical models
Energy Technology Data Exchange (ETDEWEB)
Lukomski, A.; McIntee, B.; Moule, D.; Nichita, E. [Faculty of Energy Systems and Nuclear Science, Univ. of Ontario Inst. of Tech., Oshawa, Ontario (Canada)
2008-07-01
DRAGON is a neutron transport and depletion code able to solve one-, two- and three-dimensional problems. To date DRAGON provides two visualization modules, able to represent respectively two- and three-dimensional geometries. The two-dimensional visualization module generates a postscript file, while the three dimensional visualization module generates a MATLAB M-file with instructions for drawing the tracks in the DRAGON TRACKING data structure, which implicitly provide a representation of the geometry. The current work introduces a new, standalone, tool based on the open-source Visualization Toolkit (VTK) software package which allows the visualization of three-dimensional geometrical models by reading the DRAGON GEOMETRY data structure and generating an axonometric image which can be manipulated interactively by the user. (author)
Three-dimensional induced polarization data inversion for complex resistivity
Energy Technology Data Exchange (ETDEWEB)
Commer, M.; Newman, G.A.; Williams, K.H.; Hubbard, S.S.
2011-03-15
The conductive and capacitive material properties of the subsurface can be quantified through the frequency-dependent complex resistivity. However, the routine three-dimensional (3D) interpretation of voluminous induced polarization (IP) data sets still poses a challenge due to large computational demands and solution nonuniqueness. We have developed a flexible methodology for 3D (spectral) IP data inversion. Our inversion algorithm is adapted from a frequency-domain electromagnetic (EM) inversion method primarily developed for large-scale hydrocarbon and geothermal energy exploration purposes. The method has proven to be efficient by implementing the nonlinear conjugate gradient method with hierarchical parallelism and by using an optimal finite-difference forward modeling mesh design scheme. The method allows for a large range of survey scales, providing a tool for both exploration and environmental applications. We experimented with an image focusing technique to improve the poor depth resolution of surface data sets with small survey spreads. The algorithm's underlying forward modeling operator properly accounts for EM coupling effects; thus, traditionally used EM coupling correction procedures are not needed. The methodology was applied to both synthetic and field data. We tested the benefit of directly inverting EM coupling contaminated data using a synthetic large-scale exploration data set. Afterward, we further tested the monitoring capability of our method by inverting time-lapse data from an environmental remediation experiment near Rifle, Colorado. Similar trends observed in both our solution and another 2D inversion were in accordance with previous findings about the IP effects due to subsurface microbial activity.
Three-dimensional reconstruction of functional brain images
Energy Technology Data Exchange (ETDEWEB)
Inoue, Masato; Shoji, Kazuhiko; Kojima, Hisayoshi; Hirano, Shigeru; Naito, Yasushi; Honjo, Iwao [Kyoto Univ. (Japan)
1999-08-01
We consider PET (positron emission tomography) measurement with SPM (Statistical Parametric Mapping) analysis to be one of the most useful methods to identify activated areas of the brain involved in language processing. SPM is an effective analytical method that detects markedly activated areas over the whole brain. However, with the conventional presentations of these functional brain images, such as horizontal slices, three directional projection, or brain surface coloring, makes understanding and interpreting the positional relationships among various brain areas difficult. Therefore, we developed three-dimensionally reconstructed images from these functional brain images to improve the interpretation. The subjects were 12 normal volunteers. The following three types of images were constructed: routine images by SPM, three-dimensional static images, and three-dimensional dynamic images, after PET images were analyzed by SPM during daily dialog listening. The creation of images of both the three-dimensional static and dynamic types employed the volume rendering method by VTK (The Visualization Toolkit). Since the functional brain images did not include original brain images, we synthesized SPM and MRI brain images by self-made C++ programs. The three-dimensional dynamic images were made by sequencing static images with available software. Images of both the three-dimensional static and dynamic types were processed by a personal computer system. Our newly created images showed clearer positional relationships among activated brain areas compared to the conventional method. To date, functional brain images have been employed in fields such as neurology or neurosurgery, however, these images may be useful even in the field of otorhinolaryngology, to assess hearing and speech. Exact three-dimensional images based on functional brain images are important for exact and intuitive interpretation, and may lead to new developments in brain science. Currently, the surface
Stability of compressible three-dimensional boundary-layer flows
Reed, H. L.; Nayfeh, A. H.
1982-01-01
For compressible three-dimensional flow, the method of multiple scales to formulate the three-dimensional stability problem and determine the partial-differential equations governing variations of the amplitude and complex wavenumbers is used. A method for following one specific wave along its trajectory to ascertain the characteristics of the most unstable disturbance is proposed. Numerical results using the flow over the X-21 wing as calculated from the Kaups-Cebeci code will be presented.
Alignment-free three-dimensional optical metamaterials.
Zhao, Yang; Shi, Jinwei; Sun, Liuyang; Li, Xiaoqin; Alù, Andrea
2014-03-05
Three-dimensional optical metamaterials based on multilayers typically rely on critical vertical alignment to achieve the desired functionality. Here the conditions under which three-dimensional metamaterials with different functionalities may be realized without constraints on alignment are analyzed and demonstrated experimentally. This study demonstrates that the release of alignment constraints for multilayered metamaterials is allowed, while their anomalous interaction with light is preserved. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Three-dimensional visualization and animation for power systems analysis
Energy Technology Data Exchange (ETDEWEB)
Milano, Federico [Department of Electrical Engineering of the University of Castilla-La Mancha, 13071, Ciudad Real (Spain)
2009-12-15
This paper describes a novel approach for three-dimensional visualization and animation of power systems analyses. The paper demonstrates that three-dimensional visualization of power systems can be used for teaching and can help in easily understanding complex concepts. The solutions of power flow analysis, continuation power flow, optimal power flow and time domain simulations are used for illustrating the proposed technique. The paper presents a variety of examples, particularly oriented to education and practitioner training. Conclusions are duly drawn. (author)
Three-dimensional network of Drosophila brain hemisphere
Mizutani, Ryuta; Saiga, Rino; Takeuchi, Akihisa; Uesugi, Kentaro; Suzuki, Yoshio
2016-01-01
The first step to understanding brain function is to determine the brain's network structure. We report a three-dimensional analysis of the brain network of the fruit fly Drosophila melanogaster by synchrotron-radiation tomographic microscopy. A skeletonized wire model of the left half of the brain network was built by tracing the three-dimensional distribution of X-ray absorption coefficients. The obtained models of neuronal processes were classified into groups on the basis of their three-d...
Three-dimensional study of the multi-cavity FEL
Energy Technology Data Exchange (ETDEWEB)
Krishnagopal, S.; Kumar, V. [Centre for Advanced Technology, Indore (India)
1995-12-31
The Multi-Cavity Free-Electron Laser has been proposed earlier, as a new configuration to obtain short, intense pulses of radiation, the key idea being to pre-bunch the electron beam in a number of very short cavities. Those studies were one-dimensional. Here we use three-dimensional simulations to study the viability of this concept when three-dimensional effects are included, particularly with regard to the transverse modes of the optical beam.
Uniform Deterministic Discrete Method for Three Dimensional Systems
Institute of Scientific and Technical Information of China (English)
无
1997-01-01
For radiative direct exchange areas in three dimensional system,the Uniform Deterministic Discrete Method(UDDM) was adopted.The spherical surface dividing method for sending area element and the regular icosahedron for sending volume element can meet with the direct exchange area computation of any kind of zone pairs.The numerical examples of direct exchange area in three dimensional system with nonhomogeneous attenuation coefficients indicated that the UDDM can give very high numercal accuracy.
Three-dimensional decomposition method of global atmospheric circulation
Institute of Scientific and Technical Information of China (English)
2008-01-01
By adopting the idea of three-dimensional Walker, Hadley and Rossby stream functions, the global atmospheric circulation can be considered as the sum of three stream functions from a global per- spective. Therefore, a mathematical model of three-dimensional decomposition of global atmospheric circulation is proposed and the existence and uniqueness of the model are proved. Besides, the model includes a numerical method leading to no truncation error in the discrete three-dimensional grid points. Results also show that the three-dimensional stream functions exist and are unique for a given velocity field. The mathematical model shows the generalized form of three-dimensional stream func- tions equal to the velocity field in representing the features of atmospheric motion. Besides, the vertical velocity calculated through the model can represent the main characteristics of the vertical motion. In sum, the three-dimensional decomposition of atmospheric circulation is convenient for the further in- vestigation of the features of global atmospheric motions.
Ordered three-dimensional interconnected nanoarchitectures in anodic porous alumina
Martín, Jaime; Martín-González, Marisol; Fernández, Jose Francisco; Caballero-Calero, Olga
2014-01-01
Three-dimensional nanostructures combine properties of nanoscale materials with the advantages of being macro-sized pieces when the time comes to manipulate, measure their properties, or make a device. However, the amount of compounds with the ability to self-organize in ordered three-dimensional nanostructures is limited. Therefore, template-based fabrication strategies become the key approach towards three-dimensional nanostructures. Here we report the simple fabrication of a template based on anodic aluminum oxide, having a well-defined, ordered, tunable, homogeneous 3D nanotubular network in the sub 100 nm range. The three-dimensional templates are then employed to achieve three-dimensional, ordered nanowire-networks in Bi2Te3 and polystyrene. Lastly, we demonstrate the photonic crystal behavior of both the template and the polystyrene three-dimensional nanostructure. Our approach may establish the foundations for future high-throughput, cheap, photonic materials and devices made of simple commodity plastics, metals, and semiconductors. PMID:25342247
A novel three-dimensional tool for teaching human neuroanatomy.
Estevez, Maureen E; Lindgren, Kristen A; Bergethon, Peter R
2010-01-01
Three-dimensional (3D) visualization of neuroanatomy can be challenging for medical students. This knowledge is essential in order for students to correlate cross-sectional neuroanatomy and whole brain specimens within neuroscience curricula and to interpret clinical and radiological information as clinicians or researchers. This study implemented and evaluated a new tool for teaching 3D neuroanatomy to first-year medical students at Boston University School of Medicine. Students were randomized into experimental and control classrooms. All students were taught neuroanatomy according to traditional 2D methods. Then, during laboratory review, the experimental group constructed 3D color-coded physical models of the periventricular structures, while the control group re-examined 2D brain cross-sections. At the end of the course, 2D and 3D spatial relationships of the brain and preferred learning styles were assessed in both groups. The overall quiz scores for the experimental group were significantly higher than the control group (t(85) = 2.02, P higher in the experimental group (F₁(,)₈₅ = 5.48, P = 0.02). When surveyed, 84% of students recommended repeating the 3D activity for future laboratories, and this preference was equally distributed across preferred learning styles (χ² = 0.14, n.s.). Our results suggest that our 3D physical modeling activity is an effective method for teaching spatial relationships of brain anatomy and will better prepare students for visualization of 3D neuroanatomy, a skill essential for higher education in neuroscience, neurology, and neurosurgery. Copyright © 2010 American Association of Anatomists.
Investigation of Axial-flow Fan and Compressor Rotors Designed for Three-dimensional Flow
Kahane, A
1947-01-01
An investigation has been conducted to determine whether three-dimensional flows may be utilized in axial-flow fan and compressor rotors so that the spanwise load distribution may be varied to obtain high pressure rise. Two rotors, one with approximately uniform and one with solid-body downstream tangential-velocity distributions, were designed and tested at the design blade angle. Radial surveys of total pressure, static pressure, and flow angle were made upstream and downstream of the test rotors through a quantity-coefficient range. Tests of the solid-body rotor were also conducted at a large value of tip clearance. The results indicated that the three-dimensional flows may be utilized with high efficiency and that the three-dimensional theory used in conjunction with two-dimensional cascade data is sufficiently accurate for design purposes. The tests also showed that the tip-clearance losses of rotors highly loaded at the tips are not excessive. The existing three-dimensional theory in simplified for and an illustrative rotor design are presented in appendixes.
Three-dimensional magnetospheric equilibrium with isotropic pressure
Energy Technology Data Exchange (ETDEWEB)
Cheng, C.Z.
1995-05-01
In the absence of the toroidal flux, two coupled quasi two-dimensional elliptic equilibrium equations have been derived to describe self-consistent three-dimensional static magnetospheric equilibria with isotropic pressure in an optimal ({Psi},{alpha},{chi}) flux coordinate system, where {Psi} is the magnetic flux function, {chi} is a generalized poloidal angle, {alpha} is the toroidal angle, {alpha} = {phi} {minus} {delta}({Psi},{phi},{chi}) is the toroidal angle, {delta}({Psi},{phi},{chi}) is periodic in {phi}, and the magnetic field is represented as {rvec B} = {del}{Psi} {times} {del}{alpha}. A three-dimensional magnetospheric equilibrium code, the MAG-3D code, has been developed by employing an iterative metric method. The main difference between the three-dimensional and the two-dimensional axisymmetric solutions is that the field-aligned current and the toroidal magnetic field are finite for the three-dimensional case, but vanish for the two-dimensional axisymmetric case. With the same boundary flux surface shape, the two-dimensional axisymmetric results are similar to the three-dimensional magnetosphere at each local time cross section.
Biodynamic profiling of three-dimensional tissue growth techniques
Sun, Hao; Merrill, Dan; Turek, John; Nolte, David
2016-03-01
Three-dimensional tissue culture presents a more biologically relevant environment in which to perform drug development than conventional two-dimensional cell culture. However, obtaining high-content information from inside three dimensional tissue has presented an obstacle to rapid adoption of 3D tissue culture for pharmaceutical applications. Biodynamic imaging is a high-content three-dimensional optical imaging technology based on low-coherence interferometry and digital holography that uses intracellular dynamics as high-content image contrast. In this paper, we use biodynamic imaging to compare pharmaceutical responses to Taxol of three-dimensional multicellular spheroids grown by three different growth techniques: rotating bioreactor, hanging-drop and plate-grown spheroids. The three growth techniques have systematic variations among tissue cohesiveness and intracellular activity and consequently display different pharmacodynamics under identical drug dose conditions. The in vitro tissue cultures are also compared to ex vivo living biopsies. These results demonstrate that three-dimensional tissue cultures are not equivalent, and that drug-response studies must take into account the growth method.
Coupled particle dispersion by three-dimensional vortex structures
Energy Technology Data Exchange (ETDEWEB)
Troutt, T.R.; Chung, J.N.; Crowe, C.T.
1996-12-31
The primary objective of this research program is to obtain understanding concerning the role of three-dimensional vortex structures in the dispersion of particles and droplets in free shear flows. This research program builds on previous studies which focused on the nature of particle dispersion in large scale quasi two-dimensional vortex structures. This investigation employs time dependent experimental and numerical techniques to provide information concerning the particulate dispersion produced by three dimensional vortex structures in free shear layers. The free shear flows investigated include modified plane mixing layers, and modified plane wakes. The modifications to these flows involve slight perturbations to the initiation boundary conditions such that three-dimensional vortex structures are rapidly generated by the experimental and numerical flow fields. Recent results support the importance of these vortex structures in the particle dispersion process.
Hydrofocusing Bioreactor for Three-Dimensional Cell Culture
Gonda, Steve R.; Spaulding, Glenn F.; Tsao, Yow-Min D.; Flechsig, Scott; Jones, Leslie; Soehnge, Holly
2003-01-01
The hydrodynamic focusing bioreactor (HFB) is a bioreactor system designed for three-dimensional cell culture and tissue-engineering investigations on orbiting spacecraft and in laboratories on Earth. The HFB offers a unique hydrofocusing capability that enables the creation of a low-shear culture environment simultaneously with the "herding" of suspended cells, tissue assemblies, and air bubbles. Under development for use in the Biotechnology Facility on the International Space Station, the HFB has successfully grown large three-dimensional, tissuelike assemblies from anchorage-dependent cells and grown suspension hybridoma cells to high densities. The HFB, based on the principle of hydrodynamic focusing, provides the capability to control the movement of air bubbles and removes them from the bioreactor without degrading the low-shear culture environment or the suspended three-dimensional tissue assemblies. The HFB also provides unparalleled control over the locations of cells and tissues within its bioreactor vessel during operation and sampling.
Computational methods for three-dimensional microscopy reconstruction
Frank, Joachim
2014-01-01
Approaches to the recovery of three-dimensional information on a biological object, which are often formulated or implemented initially in an intuitive way, are concisely described here based on physical models of the object and the image-formation process. Both three-dimensional electron microscopy and X-ray tomography can be captured in the same mathematical framework, leading to closely-related computational approaches, but the methodologies differ in detail and hence pose different challenges. The editors of this volume, Gabor T. Herman and Joachim Frank, are experts in the respective methodologies and present research at the forefront of biological imaging and structural biology. Computational Methods for Three-Dimensional Microscopy Reconstruction will serve as a useful resource for scholars interested in the development of computational methods for structural biology and cell biology, particularly in the area of 3D imaging and modeling.
Radiation hardness of three-dimensional polycrystalline diamond detectors
Energy Technology Data Exchange (ETDEWEB)
Lagomarsino, Stefano, E-mail: lagomarsino@fi.infn.it; Sciortino, Silvio [National Institute of Nuclear Physics (INFN), Via B. Rossi, 1-3, 50019 Sesto Fiorentino (Italy); Department of Physics and Astronomy, University of Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); Bellini, Marco [European Laboratory for Non-Linear Spectroscopy, Via Nello Carrara 1, 50019 Sesto Fiorentino (Italy); Istituto Nazionale di Ottica (INO-CNR), Largo Enrico Fermi 6, 50125 Firenze (Italy); Corsi, Chiara [Department of Physics and Astronomy, University of Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); European Laboratory for Non-Linear Spectroscopy, Via Nello Carrara 1, 50019 Sesto Fiorentino (Italy); Cindro, Vladimir [Jozef Stefan Institute, Jamova cesta 39, 1000 Ljubljana (Slovenia); Kanxheri, Keida; Servoli, Leonello [National Institute of Nuclear Physics (INFN), Via A. Pascoli, 06123 Perugia (Italy); Department of Physics, University of Perugia, Via A. Pascoli, 06123 Perugia (Italy); Morozzi, Arianna [Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia (Italy); Passeri, Daniele [National Institute of Nuclear Physics (INFN), Via A. Pascoli, 06123 Perugia (Italy); Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia (Italy); Schmidt, Christian J. [GSI Helmholtzzentrum für Schwerionenforschung, Planckstraße 1, 64291 Darmstadt (Germany)
2015-05-11
The three-dimensional concept in particle detection is based on the fabrication of columnar electrodes perpendicular to the surface of a solid state radiation sensor. It permits to improve the radiation resistance characteristics of a material by lowering the necessary bias voltage and shortening the charge carrier path inside the material. If applied to a long-recognized exceptionally radiation-hard material like diamond, this concept promises to pave the way to the realization of detectors of unprecedented performances. We fabricated conventional and three-dimensional polycrystalline diamond detectors, and tested them before and after neutron damage up to 1.2 ×10{sup 16 }cm{sup −2}, 1 MeV-equivalent neutron fluence. We found that the signal collected by the three-dimensional detectors is up to three times higher than that of the conventional planar ones, at the highest neutron damage ever experimented.
Three-dimensional network of Drosophila brain hemisphere
Mizutani, Ryuta; Takeuchi, Akihisa; Uesugi, Kentaro; Suzuki, Yoshio
2016-01-01
The first step to understanding brain function is to determine the brain's network structure. We report a three-dimensional analysis of the brain network of the fruit fly Drosophila melanogaster by synchrotron-radiation tomographic microscopy. A skeletonized wire model of the left half of the brain network was built by tracing the three-dimensional distribution of X-ray absorption coefficients. The obtained models of neuronal processes were classified into groups on the basis of their three-dimensional structures. These classified groups correspond to neuronal tracts that send long-range projections or repeated structures of the optic lobe. The skeletonized model is also composed of neuronal processes that could not be classified into the groups. The distribution of these unclassified structures correlates with the distribution of contacts between neuronal processes. This suggests that neurons that cannot be classified into typical structures should play important roles in brain functions. The quantitative de...
Three-dimensional microtomographic imaging of human brain cortex
Mizutania, Ryuta; Uesugi, Kentaro; Ohyama, Masami; Takekoshi, Susumu; Osamura, R Yoshiyuki; Suzuki, Yoshio
2016-01-01
This paper describes an x-ray microtomographic technique for imaging the three-dimensional structure of the human cerebral cortex. Neurons in the brain constitute a neural circuit as a three-dimensional network. The brain tissue is composed of light elements that give little contrast in a hard x-ray transmission image. The contrast was enhanced by staining neural cells with metal compounds. The obtained structure revealed the microarchitecture of the gray and white matter regions of the frontal cortex, which is responsible for the higher brain functions.
Three-dimensional flow and turbulence structure in electrostatic precipitator
DEFF Research Database (Denmark)
Ullum, Thorvald Uhrskov; Larsen, Poul Scheel; Özcan, Oktay
2002-01-01
Stereo PIV is employed to study the three-dimensional velocity and turbulence fields in a laboratory model of a negative corona, barbed-wire, smooth-plate, electrostatic precipitator (figure 1). The study is focused on determining the parametric effects of axial development, mean current density Jm...... and bulk velocity U0 on secondary flows and turbulence levels and structures due to the action of the three-dimensional electrostatic field on the charged gas. At constant bulk velocity (U0 = 1 m/s) and current density (Jm = 0.4 mA/m2), secondary flows in the form of rolls of axial vorticity with swirl...
A class of auxetic three-dimensional lattices
Cabras, Luigi
2015-01-01
We propose a class of auxetic three-dimensional lattice structures. The elastic microstructure can be designed in order to have omni-directional Poisson's ratio arbitrarily close to the stability limit -1. The cubic behavior of the periodic system has been fully characterized; the minumum and maximum Poisson's ratio and the associated principal directions are given as a function of the microstructural parameters. The initial microstructure is then modified into a body centered-cubic system that can achieve a Poisson's ratio lower than -1 and that can also behave as an isotropic three-dimensional auxetic structure.
Three dimensional super-resolution in metamaterial slab lenses
Mesa, F; Freire, M; Baena, J D
2005-01-01
This letter presents a theoretical and experimental study on the viability of obtaining three dimensional super-resolution (i.e. resolution overcoming the diffraction limit for all directions in space) by means of metamaterial slab lenses. Although the source field cannot be actually reproduced at the back side of the lens with super-resolution in all space directions, the matching capabilities of metamaterial slabs does make it possible the detection of images with three-dimensional super-resolution. This imaging takes place because of the coupling between the evanescent space harmonic components of the field generated at both the source and the detector.
A system of three-dimensional complex variables
Martin, E. Dale
1986-01-01
Some results of a new theory of multidimensional complex variables are reported, including analytic functions of a three-dimensional (3-D) complex variable. Three-dimensional complex numbers are defined, including vector properties and rules of multiplication. The necessary conditions for a function of a 3-D variable to be analytic are given and shown to be analogous to the 2-D Cauchy-Riemann equations. A simple example also demonstrates the analogy between the newly defined 3-D complex velocity and 3-D complex potential and the corresponding ordinary complex velocity and complex potential in two dimensions.
Structure of turbulence in three-dimensional boundary layers
Subramanian, Chelakara S.
1993-01-01
This report provides an overview of the three dimensional turbulent boundary layer concepts and of the currently available experimental information for their turbulence modeling. It is found that more reliable turbulence data, especially of the Reynolds stress transport terms, is needed to improve the existing modeling capabilities. An experiment is proposed to study the three dimensional boundary layer formed by a 'sink flow' in a fully developed two dimensional turbulent boundary layer. Also, the mean and turbulence field measurement procedure using a three component laser Doppler velocimeter is described.
Urologic applications of multiplanar and three-dimensional computed tomography.
Olson, M C; Posniak, H V
1995-01-01
The introduction of helical computed tomography (CT) has resulted in improved quality of multiplanar reformations and three-dimensional reconstructions in the chest and abdomen and has made CT angiography a clinical reality. These imaging techniques are useful for evaluating the urinary tract, adding a new dimension to its display, resulting in improved diagnosis of renal and perirenal disease. This article reviews the indications and techniques utilized for multiplanar and three-dimensional CT for urology. The advantages and limitations are discussed, and normal and pathologic findings in the urinary tract illustrated.
Gas-Kinetic BGK Scheme for Three Dimensional Magnetohydrodynamics
Institute of Scientific and Technical Information of China (English)
Huazhong
2010-01-01
The gas-kinetic theory based flux splitting method has been successfully proposed for solving one- and two-dimensional ideal magnetohydrodynamics by Xu et al.[J. Comput. Phys., 1999; 2000], respectively. This paper extends the kinetic method to solve three-dimensional ideal magnetohydrodynamics equations, where an adaptive parameter η is used to control the numerical dissipation in the flux splitting method.Several numerical examples are given to demonstrate that the proposed method can achieve high numerical accuracy and resolve strong discontinuous waves in three dimensional ideal MHD problems.
Three Dimensional Imaging with Multiple Wavelength Speckle Interferometry
Energy Technology Data Exchange (ETDEWEB)
Bernacki, Bruce E.; Cannon, Bret D.; Schiffern, John T.; Mendoza, Albert
2014-05-28
We present the design, modeling, construction, and results of a three-dimensional imager based upon multiple-wavelength speckle interferometry. A surface under test is illuminated with tunable laser light in a Michelson interferometer configuration while a speckled image is acquired at each laser frequency step. The resulting hypercube is Fourier transformed in the frequency dimension and the beat frequencies that result map the relative offsets of surface features. Synthetic wavelengths resulting from the laser tuning can probe features ranging from 18 microns to hundreds of millimeters. Three dimensional images will be presented along with modeling results.
Fabrication and characterization of three-dimensional biomimetic chiral composites.
Turner, Mark D; Schröder-Turk, Gerd E; Gu, Min
2011-05-09
Here we show the fabrication and characterization of a novel class of biomimetic photonic chiral composites inspired by a recent finding in butterfly wing-scales. These three-dimensional networks have cubic symmetry, are fully interconnected, have robust mechanical strength and possess chirality which can be controlled through the composition of multiple chiral networks, providing an excellent platform for developing novel chiral materials. Using direct laser writing we have fabricated different types of chiral composites that can be engineered to form novel photonic devices. We experimentally show strong circular dichroism and compare with numerical simulations to illustrate the high quality of these three-dimensional photonic structures.
Symmetries and defects in three-dimensional topological field theory
Fuchs, Jurgen
2015-01-01
Boundary conditions and defects of any codimension are natural parts of any quantum field theory. Surface defects in three-dimensional topological field theories of Turaev-Reshetikhin type have applications to two-dimensional conformal field theories, in solid state physics and in quantum computing. We explain an obstruction to the existence of surface defects that takes values in a Witt group. We then turn to surface defects in Dijkgraaf-Witten theories and their construction in terms of relative bundles; this allows one to exhibit Brauer-Picard groups as symmetry groups of three-dimensional topological field theories.
A SIMULATION OF CO2 UPTAKE IN A THREE DIMENSIONAL OCEAN CARBON CYCLE MODEL
Institute of Scientific and Technical Information of China (English)
金心; 石广玉
2001-01-01
A three-dimensional ocean carbon cycle model which is a general circulation model couple.d with simple biogeochemical processes is used to simulate CO2 uptake by the ocean. The OGCM used is a modified version of the Geophysical Fluid Dynamics Laboratory modular ocean model (MOM2). The ocean chemistry and a simple ocean biota model are included. Principal variables are .total CO2, alkalinity and phosphate. The vertical profile of POC flux observed by sediment traps is adopted, the rain ratio, a ratio of production rate of calcite against that of POC, and the bio-production efficiency should be 0. 06 and 2 per year, separately. The uptake of anthropogenicCO2 by the ocean is studied. Calculated oceanic uptake of anthropogenic CO2 during the 1980s is 2. 05× 10 15g (Pg) per year. The regional distributions of global oceanic CO2 are discussed.
Institute of Scientific and Technical Information of China (English)
吾雅平
2016-01-01
The survey shows English listening problems commonly exist in vocational colleges. Viewing from the overall distribution, most problems lie in the layer of emotional filtration while others lie in the layers of linguistic cognition and studying management. Viewing from the individual distribution, the three biggest problems reported are anxiety and fear resulted from continuous setbacks and self-confidence sufferings, not being able to focus attention long, and being short of vocabulary. Using students’ self-retrospection reports for reference, the article analyzes their psychological course of linguistic cognition. Therefore, the problem reduction path of three dimensional drives was demonstrated. They are emotional filtration drive, linguistic cognition drive and studying management drive.%调研显示高职学生英语听力困难普遍存在。从整体分布看，困难最多在情感过滤层，其次是语言认知层和学习管理层；从单向分布看，报告最多的三项困难是自信心持续受挫导致紧张恐惧、注意力不能长久集中、词汇量不足。结合自省报告分析学生听力认知心理过程，并努力探寻困难消减的三维驱动路径，即情感过滤驱动、语言认知驱动和学习管理驱动。
Fenton, Flavio H.; Evans, Steven J.; Hastings, Harold M.; Cherry, Elizabeth M.
2006-03-01
Presentation and analysis of large three-dimensional data sets is in general hard to do using only two-dimensional figures and plots. In this talk, we will demonstrate techniques for illustrating static and dynamic three-dimensional objects and data using Virtual Reality Modeling Language (VRML) as well as Java. The advantage of these two languages is that they are platform-independent, which allows for easy sharing of data and visualizations. In addition, manipulation of data is relatively easy as rotation, translation and zooming can be done in real- time for static objects as well as for data and objects that vary and deform in time. Examples of fully three-dimensional movies will be shown, including dendritic growth and propagation of electrical waves in cardiac tissue. In addition, we will show how to include VRML and Java viewers in PowerPoint for easy presentation of results in classes and seminars.
Approaching the Sequential and Three-Dimensional Organization of Genomes
T.A. Knoch (Tobias)
2006-01-01
textabstractGenomes are one of the major foundations of life due to their role in information storage, process regulation and evolution. To achieve a deeper unterstanding of the human genome the three-dimensional organization of the human cell nucleus, the structural-, scaling- and dynamic prope
Vacuum polarization around a three-dimensional black hole
Shiraishi, Kiyoshi
2015-01-01
We calculate the Euclidean propagator for a conformally coupled massless scalar field in the background of the three-dimensional black hole. The expectation value $\\langle\\varphi^2\\rangle$ in the Hartle-Hawking state is obtained in the spacetime.
Three-dimensional echocardiographic assessment of the repaired mitral valve.
Maslow, Andrew; Mahmood, Feroze; Poppas, Athena; Singh, Arun
2014-02-01
This study examined the geometric changes of the mitral valve (MV) after repair using conventional and three-dimensional echocardiography. Prospective evaluation of consecutive patients undergoing mitral valve repair. Tertiary care university hospital. Fifty consecutive patients scheduled for elective repair of the mitral valve for regurgitant disease. Intraoperative transesophageal echocardiography. Assessments of valve area (MVA) were performed using two-dimensional planimetry (2D-Plan), pressure half-time (PHT), and three-dimensional planimetry (3D-Plan). In addition, the direction of ventricular inflow was assessed from the three-dimensional imaging. Good correlations (r = 0.83) and agreement (-0.08 +/- 0.43 cm(2)) were seen between the MVA measured with 3D-Plan and PHT, and were better than either compared to 2D-Plan. MVAs were smaller after repair of functional disease repaired with an annuloplasty ring. After repair, ventricular inflow was directed toward the lateral ventricular wall. Subgroup analysis showed that the change in inflow angle was not different after repair of functional disease (168 to 171 degrees) as compared to those presenting with degenerative disease (168 to 148 degrees; p<0.0001). Three-dimensional imaging provides caregivers with a unique ability to assess changes in valve function after mitral valve repair. Copyright © 2014 Elsevier Inc. All rights reserved.
Generation of a Desired Three-Dimensional Electromagnetic Field
DEFF Research Database (Denmark)
2005-01-01
The present invention relates to a method and a system for synthesizing a prescribed three-dimensional electromagnetic field based on generalized phase contrast imaging. Such a method and apparatus may be utilized in advanced optical micro and nano-manipulation, such as by provision of a multiple...
Three-dimensional reconstruction of the otosclerotic focus
DEFF Research Database (Denmark)
Bloch, Sune Land; Sørensen, Mads Sølvsten
2010-01-01
The location and three-dimensional (3D) shapes of the otosclerotic foci suggest a general centripetal distribution of otosclerotic bone remodeling around the inner ear space, whereas the normal bone remodeling is distributed centrifugally. The existence of an inverse spatial relation between normal...
Computer Generated Holography as a Three-Dimensional Display Medium
1990-12-01
series of two dimensional images are reflected on an object screen resulting in an autostereoscopic , or true three dimensional, images. The advantages of...an attractive target to optimize. Jack Ritter has suggested a fast approximation to 3D Euclidean distance calculations (10:432). His methid uses no
Resistive drift wave turbulence in a three-dimensional geometry
DEFF Research Database (Denmark)
Korsholm, Søren Bang; Michelsen, Poul; Naulin, V.
1999-01-01
The Hasegawa-Wakatani model describing resistive drift waves is investigated analytically and numerically in a three-dimensional periodic geometry. After an initial growth of the energy the drift waves couple nonlinearly to convective cells, which eventually dominate the system completely...
Three-Dimensional Evolution of the Galactic Fountain
D'Avillez, M A
1999-01-01
Gas that escapes from the Galactic disk, rises into the halo, cools and falls back, constitutes a "Galactic Fountain". Three-Dimensional simulations show that such a fountain model reproduces many of the features that have been observed in the Galaxy and other galaxies such as M31 and M33. Here, these results are reported.
Highly monodisperse bismuth nanoparticles and their three-dimensional superlattices.
Yarema, Maksym; Kovalenko, Maksym V; Hesser, Günter; Talapin, Dmitri V; Heiss, Wolfgang
2010-11-01
A simple and reproducible synthesis of highly monodisperse and ligand-protected bismuth nanoparticles (Bi NPs) is reported. The size of the single-crystalline and spherically shaped NPs is controlled between 11 and 22 nm mainly by the reaction temperature. The high uniformity of the NPs allows their self-assembly into long-range-ordered two- and three-dimensional superstructures.
Three-Dimensional Bone Adaptation of the Proximal Femur
DEFF Research Database (Denmark)
Bagge, Mette
1998-01-01
The bone remodeling of a three-dimensional model of the proximal femur is considered. The bone adaptation is numerically described as an evolution in time formulated such that the structural change goes in an optimal direction within each time step for the optimal boundary conditions. In the bone...
THE THREE DIMENSIONAL MODELS AND THEIR IDENTIFICATION MINING SUBSIDENCE
Institute of Scientific and Technical Information of China (English)
WUGe; SHENGuanghan; JIXiaoming; WANGQuanke
1995-01-01
The theory and method for selecting the three dimensional prediction models of mining subsidence are studied in this paper. Namely, based on system identification and statistics theory, an optimum mining subsidence prediction model can be selected. The method proved by a typical case has a good prospect for determining the physical model of rock mass for mining subsidence prediction.
BIFURCATION OF PERIODIC ORBITS OF A THREE-DIMENSIONAL SYSTEM
Institute of Scientific and Technical Information of China (English)
LIU XUANLIANG; HAN MAOAN
2005-01-01
Consider a three-dimensional system having an invariant surface. By using bifurcation techniques and analyzing the solutions of bifurcation equations, the authors study the spacial bifurcation phenomena of a k multiple closed orbit in the invariant surface.The sufficient conditions of the existence of many closed orbits bifurcate from the k multiple closed orbit are obtained.
Three dimensional geometric modeling of processing-tomatoes
Characterizing tomato geometries with different shapes and sizes would facilitate the design of tomato processing equipments and promote computer-based engineering simulations. This research sought to develop a three-dimensional geometric model that can describe the morphological attributes of proce...
Thermodynamics of a Simple Three-Dimensional DNA Hairpin Model
Kremer, Kellan; Boggess, Erin; Mask, Walker; Saucedo, Tony; Hansen, JJ; Appelgate, Ian; Jurgensen, Taylor; Santos, Aaron
2016-01-01
We characterize the equation of state for a simple three-dimensional DNA hairpin model using a Metropolis Monte Carlo algorithm. This algorithm was run at constant temperature and fixed separation between the terminal ends of the strand. From the equation of state, we compute the compressibility, thermal expansion coefficient, and specific heat along with adiabatic path.
Three-dimensional simulations of viscoelastic instability in polymeric filaments
DEFF Research Database (Denmark)
Rasmussen, Henrik Koblitz; Hassager, Ole
1999-01-01
The three-dimensional Langrangian integral method is used to simulate the elastic end-plate instability that occurs in the rapid extension of some polymeric filaments between parallel plates. It is demonstrated that the upper convected Maxwell model describes the essential features of the instabi...
Two-Dimensional Chirality in Three-Dimensional Chemistry.
Wintner, Claude E.
1983-01-01
The concept of two-dimensional chirality is used to enhance students' understanding of three-dimensional stereochemistry. This chirality is used as a key to teaching/understanding such concepts as enaniotropism, diastereotopism, pseudoasymmetry, retention/inversion of configuration, and stereochemical results of addition to double bonds. (JN)
A Three-Dimensional Haptic Matrix Test of Nonverbal Reasoning
Miller, Joseph C.; Skillman, Gemma D.; Benedetto, Joanne M.; Holtz, Ann M.; Nassif, Carrie L.; Weber, Anh D.
2007-01-01
Three-dimensional haptic matrices were pilot-tested as a nonvisual measure of cognitive ability. The results indicated that they correlated with convergent measures, with emphasis on spatial processing and that the participants who described items "visually" completed them more quickly and accurately and tended to have become visually impaired…
Polycrystalline diamond detectors with three-dimensional electrodes
Energy Technology Data Exchange (ETDEWEB)
Lagomarsino, S., E-mail: lagomarsino@fi.infn.it [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Bellini, M. [INO-CNR Firenze, Largo E. Fermi 6, 50125 Firenze (Italy); Brianzi, M. [INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Carzino, R. [Smart Materials-Nanophysics, Istituto Italiano di Tecnologia, Genova, Via Morego 30, 16163 Genova (Italy); Cindro, V. [Joseph Stefan Institute, Jamova Cesta 39, 1000 Ljubljana (Slovenia); Corsi, C. [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); LENS Firenze, Via N. Carrara 1, 50019 Sesto Fiorentino (Italy); Morozzi, A.; Passeri, D. [INFN Perugia, Perugia (Italy); Università degli Studi di Perugia, Dipartimento di Ingegneria, via G. Duranti 93, 06125 Perugia (Italy); Sciortino, S. [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Servoli, L. [INFN Perugia, Perugia (Italy)
2015-10-01
The three-dimensional concept in diamond detectors has been applied, so far, to high quality single-crystal material, in order to test this technology in the best available conditions. However, its application to polycrystalline chemical vapor deposited diamond could be desirable for two reasons: first, the short inter-electrode distance of three-dimensional detectors should improve the intrinsically lower collection efficiency of polycrystalline diamond, and second, at high levels of radiation damage the performances of the poly-crystal material are not expected to be much lower than those of the single crystal one. We report on the fabrication and test of three-dimensional polycrystalline diamond detectors with several inter-electrode distances, and we demonstrate that their collection efficiency is equal or higher than that obtained with conventional planar detectors fabricated with the same material. - Highlights: • Pulsed laser fabrication of polycristalline diamond detectors with 3D electrodes. • Measurement of the charge collection efficiency (CCE) under beta irradiation. • Comparation between the CCE of 3D and conventional planar diamond sensors. • A rationale for the behavior of three-dimensional and planar sensors is given.
Potential Flows From Three-Dimensional Complex Variables
Martin, E. Dale; Kelly, Patrick H.; Panton, Ronald L.
1992-01-01
Report presents investigation of several functions of three-dimensional complex variable, with emphasis on potential-flow fields computed from these functions. Part of continuing research on generalization of well-established two-dimensional complex analysis to three and more dimensions.
Three-dimensional modes of a symmetric nonlinear plane waveguide
Akhmediev, N. N.; Nabiev, R. F.; Popov, Yu. M.
1989-01-01
The three-dimensional problem of a symmetric nonlinear plane waveguide, which consist of a linear medium layer surrounded by nonlinear media, is investigated. The stationary solution of this problem is a mode whose field is falling to zero at infinity in all directions perpendicular to the propagation direction. The even, odd and assymetrical solutions of the problem are obtained.
Oblique water entry of a three dimensional body
Directory of Open Access Journals (Sweden)
Scolan Yves-Marie
2014-12-01
Full Text Available The problem of the oblique water entry of a three dimensional body is considered. Wagner theory is the theoretical framework. Applications are discussed for an elliptic paraboloid entering an initially flat free surface. A dedicated experimental campaign yields a data base for comparisons. In the present analysis, pressure, force and dynamics of the wetted surface expansion are assessed.
Three-Dimensional Reconstruction of Macroscopic Features in Biological Materials
Krumnikl, Michal; Sojka, Eduard; Gaura, Jan; Motyka, Oldřich
This paper covers the topic of three dimensional reconstruction of small textureless formations usually found in biological samples. Generally used reconstructing algorithms do not provide sufficient accuracy for surface analysis. In order to achieve better results, combined strategy was developed, linking stereo matching algorithms with monocular depth cues such as depth from focus and depth from illumination.
Three-dimensional stiffness of the carpal arch.
Gabra, Joseph N; Li, Zong-Ming
2016-01-01
The carpal arch of the wrist is formed by irregularly shaped carpal bones interconnected by numerous ligaments, resulting in complex structural mechanics. The purpose of this study was to determine the three-dimensional stiffness characteristics of the carpal arch using displacement perturbations. It was hypothesized that the carpal arch would exhibit an anisotropic stiffness behavior with principal directions that are oblique to the conventional anatomical axes. Eight (n=8) cadavers were used in this study. For each specimen, the hamate was fixed to a custom stationary apparatus. An instrumented robot arm applied three-dimensional displacement perturbations to the ridge of trapezium and corresponding reaction forces were collected. The displacement-force data were used to determine a three-dimensional stiffness matrix using least squares fitting. Eigendecomposition of the stiffness matrix was used to identify the magnitudes and directions of the principal stiffness components. The carpal arch structure exhibited anisotropic stiffness behaviors with a maximum principal stiffness of 16.4±4.6N/mm that was significantly larger than the other principal components of 3.1±0.9 and 2.6±0.5N/mm (pcarpal tunnel which is accounted for by the stiff transverse ligaments that tightly bind distal carpal arch. The minimal principal stiffness is attributed to the less constraining articulation between the trapezium and scaphoid. This study provides advanced characterization of the wrist׳s three-dimensional structural stiffness for improved insight into wrist biomechanics, stability, and function.
Three-dimensional charge transport in organic semiconductor single crystals.
He, Tao; Zhang, Xiying; Jia, Jiong; Li, Yexin; Tao, Xutang
2012-04-24
Three-dimensional charge transport anisotropy in organic semiconductor single crystals - both plates and rods (above and below, respectively, in the figure) - is measured in well-performing organic field-effect transistors for the first time. The results provide an excellent model for molecular design and device preparation that leads to good performance.
Differential equations of the shell suspension. Three-dimensional problem
Гнатейко, Нонна Валентинівна
2016-01-01
Differential equations of suspension of gyroscope are constructed as a shell of rotation. Analytical material well-being of analysis of properties of suspension as a system with part parameters is created. Three-dimensional approach gives possibility for the comprehensive study of errors of devices of inertial navigation from position impedance status.
Automated analysis of three-dimensional stress echocardiography
K.Y.E. Leung (Esther); M. van Stralen (Marijn); M.G. Danilouchkine (Mikhail); G. van Burken (Gerard); M.L. Geleijnse (Marcel); J.H.C. Reiber (Johan); N. de Jong (Nico); A.F.W. van der Steen (Ton); J.G. Bosch (Johan)
2011-01-01
textabstractReal-time three-dimensional (3D) ultrasound imaging has been proposed as an alternative for two-dimensional stress echocardiography for assessing myocardial dysfunction and underlying coronary artery disease. Analysis of 3D stress echocardiography is no simple task and requires considera
Yttrium oxide based three dimensional metamaterials for visible light cloaking
Rai, Pratyush; Kumar, Prashanth S.; Varadan, Vijay K.; Ruffin, Paul; Brantley, Christina; Edwards, Eugene
2014-04-01
Metamaterial with negative refractive index is the key phenomenon behind the concept of a cloaking device to hide an object from light in visible spectrum. Metamaterials made of two and three dimensional lattices of periodically placed electromagnetic resonant cells can achieve absorption and propagation of incident electromagnetic radiation as confined electromagnetic fields confined to a waveguide as surface plasmon polaritons, which can be used for shielding an object from in-tune electromagnetic radiation. The periodicity and dimensions of resonant cavity determine the frequency, which are very small as compared to the wavelength of incident light. Till now the phenomena have been demonstrated only for lights in near infrared spectrum. Recent advancements in fabrication techniques have made it possible to fabricate array of three dimensional nanostructures with cross-sections as small as 25 nm that are required for negative refractive index for wavelengths in visible light spectrum of 400-700 nm and for wider view angle. Two types of metamaterial designs, three dimensional concentric split ring and fishnet, are considered. Three dimensional structures consisted of metal-dielectric-metal stacks. The metal is silver and dielectric is yttrium oxide, other than conventional materials such as FR4 and Duroid. High κ dielectric and high refractive index as well as large crystal symmetry of Yttrium oxide has been investigated as encapsulating medium. Dependence of refractive index on wavelength and bandwidth of negative refractive index region are analyzed for application towards cloaking from light in visible spectrum.
Polyimide Aerogels with Three-Dimensional Cross-Linked Structure
Meador, Mary Ann B. (Inventor)
2016-01-01
A method for creating a three dimensional cross-linked polyimide structure includes dissolving a diamine, a dianhydride, and a triamine in a solvent, imidizing a polyamic acid gel by heating the gel, extracting the gel in a second solvent, supercritically drying the gel, and removing the solvent to create a polyimide aerogel.
Three-dimensional reconstruction of the pigeon inner ear
Hofman, R.; Segenhout, J. M.; Wit, H. P.
2009-01-01
Three-dimensional reconstructions of the inner ear of the pigeon (Columba livia domestica), from two-dimensional images, obtained with (conventional) light microscopy or orthogonal-plane fluorescence optical sectioning (OPFOS), are presented. The results are compared with available information on th
Renormalization group theory of the three dimensional dilute Bose gas
Bijlsma, M.; Stoof, H.T.C.
1996-01-01
We study the three-dimensional atomic Bose gas using renormalization group techniques. Using our knowledge of the microscopic details of the interatomic interaction, we determine the correct initial values of our renormalization group equations and thus obtain also information on nonuniversal
Algebraic Ricci Solitons of three-dimensional Lorentzian Lie groups
Batat, Wafaa
2011-01-01
We classify Algebraic Ricci Solitons of three-dimensional Lorentzian Lie groups. All algebraic Ricci solitons that we obtain are sol-solitons. In particular, we prove that, contrary to the Riemannian case, Lorentzian Ricci solitons need not to be algebraic Ricci solitons.
Three-Dimensional Printing Using a Photoinitiated Polymer
Muskin, Joseph; Ragusa, Matthew; Gelsthorpe, Thomas
2010-01-01
Printers capable of producing three-dimensional objects are becoming more common. Most of these printers are impractical for use in the chemistry classroom because of the expense incurred in fabricating a print head that must be controlled in three dimensions. We propose a simpler solution to this problem that allows the emerging technology of…
Three dimensional boundary layers on submarine conning towers and rudders
Gleyzes, C.
1988-01-01
Solutions for the definition of grids adapted to the calculation of three-dimensional boundary layers on submarine conning towers and on submarine rudders and fins are described. The particular geometry of such bodies (oblique shaped hull, curved fins) required special adaptations. The grids were verified on examples from a test basin.
Three-Dimensional Printing Using a Photoinitiated Polymer
Muskin, Joseph; Ragusa, Matthew; Gelsthorpe, Thomas
2010-01-01
Printers capable of producing three-dimensional objects are becoming more common. Most of these printers are impractical for use in the chemistry classroom because of the expense incurred in fabricating a print head that must be controlled in three dimensions. We propose a simpler solution to this problem that allows the emerging technology of…
Three-dimensional topology optimized electrically-small conformal antenna
DEFF Research Database (Denmark)
Erentok, Aycan; Sigmund, Ole
2008-01-01
A three-dimensional (3D) conductor-based conformal electrically small antenna is obtained using a topology optimization method. The optimization method distributes a certain amount of conductive material to a designated design domain such that the material layout defines an electrically small...
Optimal eavesdropping in cryptography with three-dimensional quantum states.
Bruss, D; Macchiavello, C
2002-03-25
We study optimal eavesdropping in quantum cryptography with three-dimensional systems, and show that this scheme is more secure against symmetric attacks than protocols using two-dimensional states. We generalize the according eavesdropping transformation to arbitrary dimensions, and discuss the connection with optimal quantum cloning.
A Novel Three-Dimensional Tool for Teaching Human Neuroanatomy
Estevez, Maureen E.; Lindgren, Kristen A.; Bergethon, Peter R.
2010-01-01
Three-dimensional (3D) visualization of neuroanatomy can be challenging for medical students. This knowledge is essential in order for students to correlate cross-sectional neuroanatomy and whole brain specimens within neuroscience curricula and to interpret clinical and radiological information as clinicians or researchers. This study implemented…
Three-dimensional reconstruction of the otosclerotic focus
DEFF Research Database (Denmark)
Bloch, Sune Land; Sørensen, Mads Sølvsten
2010-01-01
The location and three-dimensional (3D) shapes of the otosclerotic foci suggest a general centripetal distribution of otosclerotic bone remodeling around the inner ear space, whereas the normal bone remodeling is distributed centrifugally. The existence of an inverse spatial relation between normal...
Scattering and conductance quantization in three-dimensional metal nanocontacts
DEFF Research Database (Denmark)
Brandbyge, Mads; Jacobsen, Karsten Wedel; Nørskov, Jens Kehlet
1997-01-01
The transmission through three-dimensional nanocontacts is calculated in the presence of localized scattering centers and boundary scattering using a coupled-channel recursion method. Simple confining potentials are used to investigate how robust the observation of quantized conductance is with r...
Three-Dimensional Extension of a Digital Library Service System
Xiao, Long
2010-01-01
Purpose: The paper aims to provide an overall methodology and case study for the innovation and extension of a digital library, especially the service system. Design/methodology/approach: Based on the three-dimensional structure theory of the information service industry, this paper combines a comprehensive analysis with the practical experiences…
Exploring Approaches to Teaching in Three-Dimensional Virtual Worlds
Englund, Claire
2017-01-01
Purpose: The purpose of this paper is to explore how teachers' approaches to teaching and conceptions of teaching and learning with educational technology influence the implementation of three-dimensional virtual worlds (3DVWs) in health care education. Design/methodology/approach: Data were collected through thematic interviews with eight…
Three dimensional rigorous model for optical scattering problems
Wei, X.
2006-01-01
We present a three-dimensional model based on the finite element method for solving the time-harmonic Maxwell equation in optics. It applies to isotropic or anisotropic dielectrics and metals, and to many configurations such as an isolated scatterer in a multilayer, bi-gratings and crystals. We shal
Institute of Scientific and Technical Information of China (English)
YUAN YiRang; LIANG Dong; RUI HongXing
2009-01-01
For the three-dimensional seawater intrusion and protection system, the model of dynamics of fluids in porous media and the modified upwind finite difference fractional steps schemes are put forward. Based on the numerical simulation of the practical situation in the Laizhou Bay Area of Shandong Province, predictive numerical simulation and analysis of the consequence of protection projects, un-derground dams, tidal barrage projects and the applied modular form of project adjustment have been finished. By using the theory and techniques of differential equation prior estimates, the convergence results have been got.
Institute of Scientific and Technical Information of China (English)
无
2009-01-01
For the three-dimensional seawater intrusion and protection system, the model of dynamics of fluids in porous media and the modified upwind finite difference fractional steps schemes are put forward. Based on the numerical simulation of the practical situation in the Laizhou Bay Area of Shandong Province, predictive numerical simulation and analysis of the consequence of protection projects, underground dams, tidal barrage projects and the applied modular form of project adjustment have been finished. By using the theory and techniques of differential equation prior estimates, the convergence results have been got.
DEFF Research Database (Denmark)
Avlonitis, Viktor; Hsuan, Juliana
2015-01-01
The purpose of this research is to investigate the studies on service modularity with a goal of informing service science and advancing contemporary service systems research. Modularity, a general systems property, can add theoretical underpinnings to the conceptual development of service science...... in general and service systems in particular. Our research is guided by the following question: how can modularity theory inform service system design? We present a review of the modularity literature and associated concepts. We then introduce the contemporary service science and service system discourse...
Three-Dimensional Waves in Tilt Thermal Boundary Layers
Institute of Scientific and Technical Information of China (English)
TAO Jian-Jun; YUAN Xiang-Jiang
2009-01-01
We numerically and theoretically study the stabilities of tilt thermal boundary layers immersed in stratified air. An interesting phenomenon is revealed: the stationary longitudinal-roll mode becomes unstable to some oscillating state even when the Grashof number is smaller than its corresponding critical value. By stability analysis, this phenomenon is explained in terms of a new three-dimensional wave mode. The effect of the tilt angle on the stability of the boundary flows is investigated. Since the new three-dimensional wave is found to be the most unstable mode when the title angle is between 30° and 64°, it is expected to play an important role in the transition to turbulence.
Three-dimensional P velocity structure in Beijing area
Institute of Scientific and Technical Information of China (English)
于湘伟; 陈运泰; 王培德
2003-01-01
A detail three-dimensional P wave velocity structure of Beijing, Tianjin and Tangshan area (BTT area) was determined by inverting local earthquake data. In total 16 048 P wave first arrival times from 16048 shallow and mid-depth crustal earthquakes, which occurred in and around the BTT area from 1992 to 1999 were used. The first arrival times are recorded by Northern China United Telemetry Seismic Network and Yanqing-Huailai Digital Seismic Network. Hypocentral parameters of 1 132 earthquakes with magnitude ML=1.7~6.2 and the three-dimensional P wave velocity structure were obtained simultaneously. The inversion result reveals the complicated lateral heterogeneity of P wave velocity structure around BTT area. The tomographic images obtained are also found to explain other seismological observations well.
Three-dimensional radiation transfer modeling in a dicotyledon leaf
Govaerts, Yves M.; Jacquemoud, Stéphane; Verstraete, Michel M.; Ustin, Susan L.
1996-11-01
The propagation of light in a typical dicotyledon leaf is investigated with a new Monte Carlo ray-tracing model. The three-dimensional internal cellular structure of the various leaf tissues, including the epidermis, the palisade parenchyma, and the spongy mesophyll, is explicitly described. Cells of different tissues are assigned appropriate morphologies and contain realistic amounts of water and chlorophyll. Each cell constituent is characterized by an index of refraction and an absorption coefficient. The objective of this study is to investigate how the internal three-dimensional structure of the tissues and the optical properties of cell constituents control the reflectance and transmittance of the leaf. Model results compare favorably with laboratory observations. The influence of the roughness of the epidermis on the reflection and absorption of light is investigated, and simulation results confirm that convex cells in the epidermis focus light on the palisade parenchyma and increase the absorption of radiation.
Three Dimensional Energy Transmitting Boundary in the Time Domain
Directory of Open Access Journals (Sweden)
Naohiro eNakamura
2015-11-01
Full Text Available Although the energy transmitting boundary is accurate and efficient for the FEM earthquake response analysis, it could be applied in the frequency domain only. In the previous papers, the author proposed an earthquake response analysis method using the time domain energy transmitting boundary for two dimensional problems. In this paper, this technique is expanded for three dimensional problems. The inner field is supposed to be a hexahedron shape and the approximate time domain boundary is explained, first. Next, two dimensional anti-plane time domain boundary is studied for a part of the approximate three dimensional boundary method. Then, accuracy and efficiency of the proposed method are confirmed by example problems.
Three-Dimensional Structure of Solar Wind Turbulence
Chen, C H K; Schekochihin, A A; Horbury, T S; Wicks, R T; Bale, S D
2011-01-01
We have measured, for the first time, the three-dimensional structure of inertial range plasma turbulence in the fast solar wind with respect to a local, physically motivated coordinate system. We found that the incompressible Alfvenic fluctuations are three-dimensionally anisotropic, with the sense of this anisotropy changing from large to small scales. At the largest scales, the magnetic field correlations are longest in the local fluctuation direction, consistent with Alfven waves. At the smallest scales, they are longest along the local mean field direction and shortest in the direction perpendicular to the local mean field and the local field fluctuation. The compressive fluctuations are highly elongated along the local mean magnetic field direction, although axially symmetric perpendicular to it. Their large anisotropy may explain why they are not heavily damped.
Three-dimensional mapping of single-atom magnetic anisotropy.
Yan, Shichao; Choi, Deung-Jang; Burgess, Jacob A J; Rolf-Pissarczyk, Steffen; Loth, Sebastian
2015-03-11
Magnetic anisotropy plays a key role in the magnetic stability and spin-related quantum phenomena of surface adatoms. It manifests as angular variations of the atom's magnetic properties. We measure the spin excitations of individual Fe atoms on a copper nitride surface with inelastic electron tunneling spectroscopy. Using a three-axis vector magnet we rotate the magnetic field and map out the resulting variations of the spin excitations. We quantitatively determine the three-dimensional distribution of the magnetic anisotropy of single Fe atoms by fitting the spin excitation spectra with a spin Hamiltonian. This experiment demonstrates the feasibility of fully mapping the vector magnetic properties of individual spins and characterizing complex three-dimensional magnetic systems.
Atomic force microscope study of three-dimensional nanostructure sidewalls
Energy Technology Data Exchange (ETDEWEB)
Hussain, Muhammad Mustafa [SEMATECH, 2706 Montopolis Drive, Austin, TX 78741 (United States); Gondran, Carolyn F H [Advanced Technology Development Facility, 2706 Montopolis Drive, Austin, TX 78741 (United States); Michelson, Diane K [International SEMATECH Manufacturing Initiative, 2706 Montopolis Drive, Austin, TX 78741 (United States)
2007-08-22
Next generation planar and non-planar complementary metal oxide semiconductor (CMOS) structures are three-dimensional nanostructures with multi-layer stacks that can contain films thinner than ten atomic layers. The high resolution of transmission electron microscopy (TEM) is typically chosen for studying properties of these stacks such as film thickness, interface and interfacial roughness. However, TEM sample preparation is time-consuming and destructive, and TEM analysis is expensive and can provide problematic results for surface and interface roughness. Therefore, in this paper, we present the use of direct measurements of sidewall surface structures by conventional atomic force microscopy (AFM) as an alternative or complementary method for studying multi-layer film stacks and as the preferred method for studying FinFET sidewall surface roughness. In addition to these semiconductor device applications, this AFM sidewall measurement technique could be used for other three-dimensional nanostructures.
Three-dimensional hybrid networks based on aspartic acid
Indian Academy of Sciences (India)
Anupama Ghosh; R A Sanguramath
2008-01-01
Three-dimensional achiral coordination polymers of the general formula M2(D, L-NHCH (COO)CH2COO)2.C4H4N2 where M = Ni and Co and pyrazine acts as the linker molecule have been prepared under hydrothermal conditions starting with [M(L-NHCH(COO)CH2COO).3H2O] possessing a helical chain structure. A three-dimensional hybrid compound of the formula Pb2.5[N{CH(COO)CH2COO}22H2O] has also been prepared hydrothermally starting with aspartic acid and Pb(NO3)2. In this lead compound, where a secondary amine formed by the dimerisation of aspartic acid acts as the ligand, there is two-dimensional inorganic connectivity and one-dimensional organic connectivity.
Artificial three-dimensional niches deconstruct pancreas development in vitro.
Greggio, Chiara; De Franceschi, Filippo; Figueiredo-Larsen, Manuel; Gobaa, Samy; Ranga, Adrian; Semb, Henrik; Lutolf, Matthias; Grapin-Botton, Anne
2013-11-01
In the context of a cellular therapy for diabetes, methods for pancreatic progenitor expansion and subsequent differentiation into insulin-producing beta cells would be extremely valuable. Here we establish three-dimensional culture conditions in Matrigel that enable the efficient expansion of dissociated mouse embryonic pancreatic progenitors. By manipulating the medium composition we generate either hollow spheres, which are mainly composed of pancreatic progenitors, or complex organoids that spontaneously undergo pancreatic morphogenesis and differentiation. The in vitro maintenance and expansion of pancreatic progenitors require active Notch and FGF signaling, thus recapitulating in vivo niche signaling interactions. Our experiments reveal new aspects of pancreas development, such as a community effect by which small groups of cells better maintain progenitor properties and expand more efficiently than isolated cells, as well as the requirement for three-dimensionality. Finally, growth conditions in chemically defined biomaterials pave the way for testing the biophysical and biochemical properties of the niche that sustains pancreatic progenitors.
Time multiplexed pinhole array based lensless three-dimensional imager
Schwarz, Ariel; Wang, Jingang; Shemer, Amir; Zalevsky, Zeev; Javidi, Bahram
2016-06-01
We present an overview of multi variable coded aperture (MVCA) for lensless three-dimensional integral imaging (3D II) systems. The new configuration is based on a time multiplexing method using a variable pinholes array design. The system provides higher resolution 3D images with improved light intensity and signal to noise ratio as compared to single pinhole system. The MVCA 3D II system configuration can be designed to achieve high light intensity for practical use as micro lenslets arrays. This new configuration preserves the advantages of pinhole optics while solving the resolution limitation problem and the long exposure time of such systems. The three dimensional images are obtained with improved resolution, signal to noise ratio and sensitivity efficiency. This integral imaging lensless system is characterized by large depth of focus, simplicity and low cost. In this paper we present numerical simulations as well as experimental results that validate the proposed lensless imaging configuration.
Electroencephalographic (EEG) control of three-dimensional movement
McFarland, Dennis J.; Sarnacki, William A.; Wolpaw, Jonathan R.
2010-06-01
Brain-computer interfaces (BCIs) can use brain signals from the scalp (EEG), the cortical surface (ECoG), or within the cortex to restore movement control to people who are paralyzed. Like muscle-based skills, BCIs' use requires activity-dependent adaptations in the brain that maintain stable relationships between the person's intent and the signals that convey it. This study shows that humans can learn over a series of training sessions to use EEG for three-dimensional control. The responsible EEG features are focused topographically on the scalp and spectrally in specific frequency bands. People acquire simultaneous control of three independent signals (one for each dimension) and reach targets in a virtual three-dimensional space. Such BCI control in humans has not been reported previously. The results suggest that with further development noninvasive EEG-based BCIs might control the complex movements of robotic arms or neuroprostheses.
Three-Dimensional All-Dielectric Photonic Topological Insulator
Slobozhanyuk, Alexey; Ni, Xiang; Smirnova, Daria; Kivshar, Yuri S; Khanikaev, Alexander B
2016-01-01
The discovery of two-dimensional topological photonic systems has transformed our views on electromagnetic propagation and scattering of classical waves, and a quest for similar states in three dimensions, known to exist in condensed matter systems, has been put forward. Here we demonstrate that symmetry protected three-dimensional topological states can be engineered in an all-dielectric platform with the electromagnetic duality between electric and magnetic fields ensured by the structure design. Magneto-electric coupling playing the role of a synthetic gauge field leads to a topological transition to an insulating regime with a complete three-dimensional photonic bandgap. An emergence of surface states with conical Dirac dispersion and spin-locking is unimpeded. Robust propagation of surface states along two-dimensional domain walls defined by the reversal of magneto-electric coupling is confirmed numerically by first principle studies. It is shown that the proposed system represents a table-top platform f...
Moyamoya disease: diagnosis with three-dimensional CT angiography
Energy Technology Data Exchange (ETDEWEB)
Tsuchiya, K. (Dept. of Radiology, National Defense Medical Coll., Saitama (Japan) Dept. of Radiology, Kyorin Univ. School of Medicine, Tokyo (Japan)); Makita, K. (Dept. of Radiology, National Defense Medical Coll., Saitama (Japan) Dept. of Radiology, Social Health Insurance Medical Center, Tokyo (Japan)); Furui, S. (Dept. of Radiology, National Defense Medical Coll., Saitama (Japan) Dept. of Diagnostic Radiology, Toranomon Kyosai Hospital, Tokyo (Japan))
1994-08-01
Our purpose was to assess the value of three-dimensional (3D) CT angiography in the diagnosis of moyamoya disease. We studied seven patients with moyamoya disease proved by conventional angiography. Three-dimensional (3D) CT angiography was performed using rapid sequence or helical (spiral) scanning in conjunction with a bolus injection of intravenous contrast medium. All seven patients could be diagnosed as having moyamoya disease on the basis of the following 3D CT angiographic findings: poor visualisation of the main trunks and/or major branches of anterior and middle cerebral arteries (7 patients); dilated leptomeningeal anastomotic channels from the posterior cerebral arteries (4); and demonstration of ''moyamoya vessels'' in the basal ganglia (2). Although conventional angiography remains the principal imaging technique for demonstrating anatomical changes in detail, less invasive 3D CT angiography provides a solid means of diagnosing moyamoya disease when it is suspected on CT, MRI, or clinical grounds. (orig.)
Three-Dimensional Modeling of Guide-Field Magnetic Reconnection
Hesse, Michael
2005-01-01
The dissipation mechanism of guide field magnetic reconnection remains a subject of intense scientific interest. On one hand, one set of recent studies have shown that particle inertia-based processes, which include thermal and bulk inertial effects, provide the reconnection electric field in the diffusion region. On the other hand, a second set of studies emphasizes the role of wave-particle interactions in providing anomalous resistivity in the diffusion region. In this presentation, we analyze three-dimensional PIC simulations of guide-field magnetic reconnection. Specific emphasis will be on the question whether thermal-inertia processes, mediated by the electron pressure tensor, remain a viable dissipation mechanism in fully three-dimensional systems.
Slightly Two or Three Dimensional Self-Similar Solutions
Sari, Re'em; Yalinewich, Almog; MacFadyen, Andrew
2011-01-01
Self similarity allows for analytic or semi-analytic solutions to many hydrodynamics problems. Most of these solutions are one dimensional. Using linear perturbation theory, expanded around such a one-dimensional solution, we find self-similar hydrodynamic solutions that are two- or three-dimensional. Since the deviation from a one-dimensional solution is small, we call these slightly two-dimensional and slightly three-dimensional self-similar solutions, respectively. As an example, we treat strong spherical explosions of the second type. A strong explosion propagates into an ideal gas with negligible temperature and density profile of the form rho(r,theta,phi)=r^{-omega}[1+sigma*F(theta,phi)], where omega>3 and sigma << 1. Analytical solutions are obtained by expanding the arbitrary function F(theta,phi) in spherical harmonics. We compare our results with two dimensional numerical simulations, and find good agreement.
Three-Dimensional Dynamical Instabilities in Galactic Ionization Fronts
Whalen, D J; Whalen, Daniel J.; Norman, Michael L.
2007-01-01
Ionization front instabilities have long been of interest for their suspected role in a variety of phenomena in the galaxy, from the formation of bright rims and 'elephant trunks' in nebulae to triggered star formation in molecular clouds. Numerical treatments of these instabilities have historically been limited in both dimensionality and input physics, leaving important questions about their true evolution unanswered. We present the first three-dimensional radiation hydrodynamical calculations of both R-type and D-type ionization front instabilities in galactic environments (i.e., solar metallicity gas). Consistent with linear stability analyses of planar D-type fronts, our models exhibit many short-wavelength perturbations growing at early times that later evolve into fewer large-wavelength structures. The simulations demonstrate that both self-consistent radiative transfer and three-dimensional flow introduce significant morphological differences to unstable modes when compared to earlier two-dimensional ...
Stability analysis of cracks propagating in three dimensional solids
Energy Technology Data Exchange (ETDEWEB)
Larralde, H.; Al-Falou, A.A.; Ball, R.C. [Cavendish Lab., Cambridge (United Kingdom)
1996-12-01
The authors present a theory for the morphology of the fracture surface left behind by slowly propagating cracks in linear, isotropic and homogeneous three dimensional solids. The results are based on first order perturbation theory of the equations of elasticity for cracks whose shape is slightly perturbed from planar. For cracks propagating under pure type 1 loading they find that all perturbation modes are linearly stable, from which they can predict the roughness of the fracture surface induced by fluctuations in the material. The authors compare their results with the classical results for cracks propagating in two dimensional systems, and discuss the effects in the three dimensional analysis which result from taking into account contributions from non-singular terms of the stress field, as well as the effects arising from finite speeds of crack propagation.
Magnetic field intensification by three-dimensional explosion process
Hotta, H; Yokoyama, T
2012-01-01
We investigate an intensification mechanism for the magnetic field near the base of the solar convection zone that does not rely on differential rotation. Such mechanism in addition to differential rotation has been suggested by studies of flux emergence, which typically require field strength in excess of those provided by differential rotation alone. We study here a process in which potential energy of the superadiabatically stratified convection zone is converted into magnetic energy. This mechanism, know as explosion of magnetic flux tubes, has been previously studied in the thin flux tube approximation as well as two-dimensional MHD simulations, we expand the investigation to three-dimensional MHD simulations. Our main result is that enough intensification can be achieved in a three-dimensional magnetic flux sheet as long as the spatial scale of the imposed perturbation normal to the magnetic field is sufficiently large. When this spatial scale is small, the flux sheet tends to rise toward the surface, r...
Canonical and symplectic analysis for three dimensional gravity without dynamics
Energy Technology Data Exchange (ETDEWEB)
Escalante, Alberto, E-mail: aescalan@ifuap.buap.mx [Instituto de Física, Benemérita Universidad Autónoma de Puebla, Apartado Postal J-48 72570, Puebla, Pue. (Mexico); Osmart Ochoa-Gutiérrez, H. [Facultad de Ciencias Físico Matemáticas, Benemérita Universidad Autónoma de Puebla, Apartado postal 1152, 72001 Puebla, Pue. (Mexico)
2017-03-15
In this paper a detailed Hamiltonian analysis of three-dimensional gravity without dynamics proposed by V. Hussain is performed. We report the complete structure of the constraints and the Dirac brackets are explicitly computed. In addition, the Faddeev–Jackiw symplectic approach is developed; we report the complete set of Faddeev–Jackiw constraints and the generalized brackets, then we show that the Dirac and the generalized Faddeev–Jackiw brackets coincide to each other. Finally, the similarities and advantages between Faddeev–Jackiw and Dirac’s formalism are briefly discussed. - Highlights: • We report the symplectic analysis for three dimensional gravity without dynamics. • We report the Faddeev–Jackiw constraints. • A pure Dirac’s analysis is performed. • The complete structure of Dirac’s constraints is reported. • We show that symplectic and Dirac’s brackets coincide to each other.
Three-dimensional theory for light-matter interaction
DEFF Research Database (Denmark)
Sørensen, Martin Westring; Sørensen, Anders Søndberg
2008-01-01
We present a full quantum mechanical three dimensional theory describing an electromagnetic field interacting with an ensemble of identical atoms. The theory is constructed such that it describes recent experiments on light-matter quantum interfaces, where the quantum fluctuations of light...... to a dressed state picture, where the light modes are solutions to the diffraction problem, and develop a perturbative expansion in the fluctuations. The fluctuations are due to quantum fluctuations as well as the random positions of the atoms. In this perturbative expansion we show how the quantum...... fluctuations are mapped between atoms and light while the random positioning of the atoms give rise to decay due to spontaneous emission. Furthermore we identify limits, where the full three dimensional theory reduce to the one dimensional theory typically used to describe the interaction....
Three Dimensional Iterative Reconstruction Techniques in Positron Tomography.
Sloka, Scott
The acquisition of positron tomographic data in three dimensions is an improvement over the two dimensional acquisition of data because the greater the number of measurements taken of a stochastic process, the more accurately determined the desired parameter may be. This research pursues the goal of three dimensional image reconstruction in Positron Tomography using an iterative approach. This thesis has followed a systematic approach to the exploration of a system for three dimensional iterative reconstruction. System design parameters were discussed such as the advantages and disadvantages of iterative vs analytic methods, the implementation of two, three dimensional iterative algorithms, the selection of a ray passing method, and the choice of an analytic method for comparison to the iterative methods. Several qualitative and quantitative tests were used/developed and performed to analyse and compare the results. Three dimensional reconstruction in Positron Tomography using two iterative techniques (ART and ML-EM) was demonstrated. The ML-EM algorithm was adapted to satisfy the objective of equalizing the estimates with the measurements via division of the sampling density. A new multi-objective function methodology was developed for two dimensions and its extension to three dimensions discussed. A smoothly-varying Gaussian phantom was created for comparing artifacts from different ray passing methods. The analysis of voxel trends over many iterations was used. The use of the output from a two dimensional filtered backprojection algorithm as the seed for three dimensional algorithms to accelerate the reconstruction the was explored. The importance of the selection of a good ray ordering in ART and its effects on the total squared error were explored. For the phantoms studied in this thesis, the ML -EM algorithm tended to perform better under most conditions. This algorithm is slower than ART to achieve both a low total squared error and good contrast, but the
Influence of stable stratification on three-dimensional isotropic turbulence
Metais, O.
The influence of a stable stratification on three-dimensional homogeneous turbulence is investigated by performing large eddy simulations with the subgrid scales procedure developed by Chollet and Lesieur for isotropic turbulence. Computational initial conditions close to those of the experiments performed by Itsweire, Helland and Van Atta allow the comparison of the experimental and numerical evolutions of density-stratified turbulent flows. Theoretical works by Riley, Metcalfe and Weisman and by Lilly suggest that low Froude number stably-stratified turbulence may be a nearly noninteracting superposition of wave and quasi-horizontal turbulent vortex motions. For our computations the stably-stratified turbulence seems to be a decaying three-dimensional turbulence pulsed by internal gravity waves. However some tendencies towards two-dimensional turbulence are observed.
Three-dimensional metamaterials fabricated using Proton Beam Writing
Energy Technology Data Exchange (ETDEWEB)
Bettiol, A.A., E-mail: a.bettiol@nus.edu.sg [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, 2 Science Dr. 3, Singapore 117542 (Singapore); Turaga, S.P.; Yan, Y.; Vanga, S.K. [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, 2 Science Dr. 3, Singapore 117542 (Singapore); Chiam, S.Y. [NUS High School for Maths and Science, 20 Clementi Avenue 1, Singapore 129957 (Singapore)
2013-07-01
Proton Beam Writing (PBW) is a direct write lithographic technique that has recently been applied to the fabrication of three dimensional metamaterials. In this work, we show that the unique capabilities of PBW, namely the ability to fabricate arrays of high resolution, high aspect ratio microstructures in polymer or replicated into metal, is well suited to metamaterials research. We have also developed a novel method for selectively electroless plating silver directly onto polymer structures that were fabricated using PBW. This method opens up new avenues for utilizing PBW for making metamaterials and other sub-wavelength metallic structures. Several potential applications of three dimensional metamaterials fabricated using PBW are discussed, including sensing and negative refractive index materials.
Single florescent nanodiamond in a three dimensional ABEL trap
Kayci, Metin; Radenovic, Aleksandra
2015-11-01
Three dimensional single particle trapping and manipulation is an outstanding challenge in various fields ranging from basic physics to life sciences. By monitoring the response of a trapped particle to a designed environment one can extract its characteristics. In addition, quantum dynamics of a spatially scanned well-known particle can provide environmental information. Precise tracking and positioning of such a particle in aqueous environment is crucial task for achieving nano-scale resolution. Here we experimentally demonstrate three dimensional ABEL trap operating at high frequency by employing a hybrid approach in particle tracking. The particle location in the transverse plane is detected via a scanning laser beam while the axial position is determined by defocused imaging. The scanning of the trapped particle is accomplished through a nano positioning stage integrated to the trap platform.
Three dimensional calculation of flux of low energy atmospheric neutrinos
Lee, H.; Bludman, S. A.
1985-01-01
Results of three-dimensional Monte Carlo calculation of low energy flux of atmospheric neutrinos are presented and compared with earlier one-dimensional calculations 1,2 valid at higher neutrino energies. These low energy neutrinos are the atmospheric background in searching for neutrinos from astrophysical sources. Primary cosmic rays produce the neutrino flux peaking at near E sub=40 MeV and neutrino intensity peaking near E sub v=100 MeV. Because such neutrinos typically deviate by 20 approximately 30 from the primary cosmic ray direction, three-dimensional effects are important for the search of atmospheric neutrinos. Nevertheless, the background of these atmospheric neutrinos is negligible for the detection of solar and supernova neutrinos.
Three Dimensional Numerical Relativity with a Hyperbolic Formulation
Bona, C; Seidel, E; Walker, P; Bona, Carles; Masso, Joan; Seidel, Edward; Walker, Paul
1998-01-01
We discuss a successful three-dimensional cartesian implementation of the Bona-Massó hyperbolic formulation of the 3+1 Einstein evolution equations in numerical relativity. The numerical code, which we call ``Cactus,'' provides a general framework for 3D numerical relativity, and can include various formulations of the evolution equations, initial data sets, and analysis modules. We show important code tests, including dynamically sliced flat space, wave spacetimes, and black hole spacetimes. We discuss the numerical convergence of each spacetime, and also compare results with previously tested codes based on other formalisms, including the traditional ADM formalism. This is the first time that a hyperbolic reformulation of Einstein's equations has been shown appropriate for three-dimensional numerical relativity in a wide variety of spacetimes.
Three-dimensional natural convection in a narrow spherical shell
Liu, Ming; Egbers, Christoph
The convective motions in a shallow fluid layer between two concentric spheres in the presence of a constant axial force field have been studied numerically. The aspect ratio of the fluid layer to inner radius is beta =0.08, the Prandtl number Pra =37.5. A three-dimensional time-dependent numerical code is used to solve the governing equations in primitive variables. Convection in the sphe rical shell has then a highly three-dimensional nature. Characteristic flow patterns with a large number of banana-type cells, oriented in north-south direction and aligned in the azimuthal direction, are formed on the northern hemisphere, which grow gradually into the equatorial region accompanied by the generation of new cells as the Rayleigh number is increased. Various characteristics of these flows as well as their transient evolution are investigated for Rayleigh numbers up to 20 000.
Three-Dimensional Reconstruction of Erythrocyte in the Capillary
Fan, Yifang; Li, Zhiyu; Lin, Wentao; Wei, Yuan; Zhong, Xing; Newman, Tony; Lv, Changsheng; Fan, Yuzhou
2013-01-01
The dynamic analysis of erythrocyte deformability is used as an important means for early diagnosis of blood diseases and blood rheology. Yet no effective method is available in terms of three-dimensional reconstruction of erythrocytes in a capillary. In this study, ultrathin serial sections of skeletal muscle tissue are obtained from the ultramicrotome, the tomographic images of an erythrocyte in a capillary are captured by the transmission electron microscope, and then a method to position and restore is devised to demonstrate the physiological relationship between two adjacent tomographic images of an erythrocyte. Both the modeling and the physical verification reveal that this method is effective, which means that it can be used to make three-dimensional reconstruction of an erythrocyte in a capillary. An example of reconstructed deformation of erythrocyte based on the serial ultrathin sections is shown at the end of this paper.
Three-dimensional potential energy surface of Ar–CO
Energy Technology Data Exchange (ETDEWEB)
Sumiyoshi, Yoshihiro, E-mail: y-sumiyoshi@gunma-u.ac.jp [Division of Pure and Applied Science, Graduate School of Science and Technology, Gunma University, 4-2 Aramaki, Maebashi, Gunma 371-8510 (Japan); Endo, Yasuki [Department of Basic Science, Graduate School of Arts and Sciences, The University of Tokyo, Komaba, Meguro-ku, Tokyo 153-8902 (Japan)
2015-01-14
A three-dimensional intermolecular potential energy surface of the Ar–CO complex has been determined by fitting most of the previously reported spectroscopic data, where observed transition frequencies by microwave, millimeter-wave, submillimeter-wave, and infrared spectroscopy were reproduced simultaneously within their experimental accuracies. A free rotor model Hamiltonian considering all the freedom of motions for an atom-diatom system was applied to calculate vibration-rotation energies. A three-dimensional potential energy surface obtained by ab initio calculations at the CCSD(T)-F12b/aug-cc-pV5Z level of theory was parameterized by a model function consisting of 46 parameters. They were used as initial values for the least-squares analysis of the experimental data. A total of 20 parameters were optimized to reproduce all the spectroscopic data.
Relaxation techniques for three-dimensional transonic flow about wings.
Bailey, F. R.; Steger, J. L.
1972-01-01
A relaxation procedure has been developed to treat the three-dimensional, transonic small perturbation equations about finite lifting wings. A combination of two schemes is employed. For flow forward of the wing trailing edge the equations are written in terms of a velocity potential in order to minimize computer algebra and storage. For the remaining flow field the equations are written in terms of the velocity components in order to simplify the enforcement of the Kutta condition. Difference equations and relaxation procedures are described for both schemes. The computational method automatically captures the imbedded shock wave in the three-dimensional flow field. Computed results are given and compared to experiment and other inviscid methods.
All-optical three-dimensional electron pulse compression
Wong, Liang Jie; Rohwer, Timm; Gedik, Nuh; Johnson, Steven G
2014-01-01
We propose an all-optical, three-dimensional electron pulse compression scheme in which Hermite-Gaussian optical modes are used to fashion a three-dimensional optical trap in the electron pulse's rest frame. We show that the correct choices of optical incidence angles are necessary for optimal compression. We obtain analytical expressions for the net impulse imparted by Hermite-Gaussian free-space modes of arbitrary order. Although we focus on electrons, our theory applies to any charged particle and any particle with non-zero polarizability in the Rayleigh regime. We verify our theory numerically using exact solutions to Maxwell's equations for first-order Hermite-Gaussian beams, demonstrating single-electron pulse compression factors of $>10^{2}$ in both longitudinal and transverse dimensions with experimentally realizable optical pulses. The proposed scheme is useful in ultrafast electron imaging for both single- and multi-electron pulse compression, and as a means of circumventing temporal distortions in ...
Absence of bilinear condensate in three-dimensional QED
Karthik, Nikhil
2016-01-01
There are plausibility arguments that QED in three dimensions has a critical number of flavors of massless two-component fermions, below which scale invariance is broken by the presence of bilinear condensate. We present numerical evidences from our lattice simulations using dynamical overlap as well as Wilson-Dirac fermions for the absence of bilinear condensate for any even number of flavors of two-component fermions. Instead, we find evidences for the scale-invariant nature of three-dimensional QED.
Three-dimensional magnetic reconnection through a moving magnetic null
Lukin, V. S.; Linton, M. G.
2011-01-01
A computational study of three-dimensional magnetic reconnection between two flux ropes through a moving reconnection site is presented. The configuration is considered in the context of two interacting spheromaks constrained by a perfectly conducting cylindrical boundary and oriented to form a single magnetic field null at its center. The initial magnetic field configuration is embedded into a uniform thermal plasma and is unstable to tilting. As the sphe...
Three-dimensional magnetic reconnection through a moving magnetic null
Lukin, V. S.; Linton, M. G.
2011-01-01
A computational study of three-dimensional magnetic reconnection between two flux ropes through a moving reconnection site is presented. The configuration is considered in the context of two interacting spheromaks constrained by a perfectly conducting cylindrical boundary and oriented to form a single magnetic field null at its center. The initial magnetic field configuration is embedded into a uniform thermal plasma and is unstable to tilting. As the spheromaks tilt, their magnetic fi...
Universally applicable three-dimensional hydrodynamic microfluidic flow focusing
Chiu, Yu-Jui; Cho, Sung Hwan; Mei, Zhe; Lien, Victor; Wu, Tsung-Feng; Lo, Yu-Hwa
2013-01-01
We have demonstrated a microfluidic device that can not only achieve three-dimensional flow focusing but also confine particles to the center stream along the channel. The device has a sample channel of smaller height and two sheath flow channels of greater height, merged into the downstream main channel where 3D focusing effects occur. We have demonstrated that both beads and cells in our device display significantly lower CVs in velocity and position distributions as well as reduced probabi...
MRFD Method for Scattering From Three Dimensional Dielectric Bodies
Directory of Open Access Journals (Sweden)
A. F. Yagli
2011-09-01
Full Text Available A three-dimensional multiresolution frequency domain (MRFD method is established to compute bistatic radar cross sections of arbitrarily shaped dielectric objects. The proposed formulation is successfully verified by computing the bistatic radar cross sections of a dielectric sphere and a dielectric cube. Comparing the results to those obtained from the finite difference frequency domain (FDFD method simulations and analytic calculations, we demonstrated the computational time and memory advantages of MRFD method.
Three-dimensional conceptual model for service-oriented simulation
Institute of Scientific and Technical Information of China (English)
Wen-guang WANG; Wei-ping WANG; Justyna ZANDER; Yi-fan ZHU
2009-01-01
In this letter, we propose a novel three-dimensional conceptual model for an emerging service-oriented simulation paradigm. The model can be used as a guideline or an analytic means to find the potential and possible future directions of the current simulation frameworks, In particular, the model inspects the crossover between the disciplines of modeling and simulation,service-orientation, and software/systems engineering. Finally, two specific simulation frameworks are studied as examples.
Three-dimensional vortex structures under breaking waves
WATANABE Yasunori; Saeki, Hiroshi; Hosking, Roger J.
2005-01-01
The large-scale vortex structures under spilling and plunging breakers are investigated, using a fully three-dimensional large-eddy simulation (LES). When an overturning jet projecting from the crest in a breaking wave rebounds from the water surface ahead, the vorticity becomes unstable in a saddle region of strain between the rebounding jet and a primary spanwise vortex, resulting in spanwise undulations of the vorticity. The undulations are amplified on a braid in this saddle region, leadi...
Probability current tornado loops in three-dimensional scattering
Exner, P; Exner, Pavel; Seba, Petr
1998-01-01
We consider scattering of a three-dimensional particle on a finite family of delta potentials. For some parameter values the scattering wavenctions exhibit nodal lines in the form of closed loops, which may touch but do not entangle. The corresponding probability current forms vortical singularities around these lines; if the scattered particle is charged, this gives rise to magnetic flux loops. The conclusions extend to scattering on hard obstacles or smooth potentials.
Three-dimensional, computer simulated navigation in endoscopic neurosurgery
Directory of Open Access Journals (Sweden)
Roberta K. Sefcik, BHA
2017-06-01
Conclusion: Three-dimensional, frameless neuronavigation systems are useful in endoscopic neurosurgery to assist in the pre-operative planning of potential trajectories and to help localize the pathology of interest. Neuronavigation appears to be accurate to <1–2 mm without issues related to brain shift. Further work is necessary in the investigation of the effect of neuronavigation on operative time, cost, and patient-centered outcomes.
Environmental, Transient, Three-Dimensional, Hydrothermal, Mass Transport Code - FLESCOT
Energy Technology Data Exchange (ETDEWEB)
Onishi, Yasuo [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bao, Jie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Glass, Kevin A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Eyler, L. L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Okumura, Masahiko [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
2015-03-28
The purpose of the project was to modify and apply the transient, three-dimensional FLESCOT code to be able to effectively simulate cesium behavior in Fukushima lakes/dam reservoirs, river mouths, and coastal areas. The ultimate objective of the FLESCOT simulation is to predict future changes of cesium accumulation in Fukushima area reservoirs and costal water. These evaluation results will assist ongoing and future environmental remediation activities and policies in a systematic and comprehensive manner.
Complete wetting in the three-dimensional transverse Ising model
Harris, A B; Micheletti, C.; Yeomans, J. M.
1996-01-01
We consider a three-dimensional Ising model in a transverse magnetic field, $h$ and a bulk field $H$. An interface is introduced by an appropriate choice of boundary conditions. At the point $(H=0,h=0)$ spin configurations corresponding to different positions of the interface are degenerate. By studying the phase diagram near this multiphase point using quantum-mechanical perturbation theory we show that that quantum fluctuations, controlled by $h$, split the multiphase degeneracy giving rise...
A new three-dimensional general-relativistic hydrodynamics code
Baiotti, L.; Hawke, I.; Montero, P. J.; Rezzolla, L.
We present a new three-dimensional general relativistic hydrodynamics code, the Whisky code. This code incorporates the expertise developed over the past years in the numerical solution of Einstein equations and of the hydrodynamics equations in a curved spacetime, and is the result of a collaboration of several European Institutes. We here discuss the ability of the code to carry out long-term accurate evolutions of the linear and nonlinear dynamics of isolated relativistic stars.
A new three-dimensional general-relativistic hydrodynamics code
Baiotti, Luca; Montero, Pedro J; Rezzolla, Luciano
2010-01-01
We present a new three-dimensional general relativistic hydrodynamics code, the Whisky code. This code incorporates the expertise developed over the past years in the numerical solution of Einstein equations and of the hydrodynamics equations in a curved spacetime, and is the result of a collaboration of several European Institutes. We here discuss the ability of the code to carry out long-term accurate evolutions of the linear and nonlinear dynamics of isolated relativistic stars.
Reentrance and ultrametricity in three-dimensional Ising spin glasses
Katzgraber, Helmut G.; Thomas, Creighton K.; Hartmann, Alexander K.
2012-02-01
We study the three-dimensional Edwards-Anderson Ising spin glass with bimodal disorder with a fraction of 22.8% antiferromagnetic bonds. Parallel tempering Monte Carlo simulations down to very low temperatures show that for this fraction of antiferromagnetic bonds the phase diagram of the system is reentrant, in agreement with previous results. Furthemore, using a clustering analysis, we analyze the ultrametric properties of phase space for this model.
Strategy for automatic and complete three-dimensional optical digitization
2012-01-01
This Letter proposes a new strategy of a three-dimensional (3D) scanning pipeline to achieve complete 3D digitization of complex objects in a real scene. This strategy consists of a one-dimensional array of optical 3D sensors combined with an automatically controlled turntable. An efficient calibration method for the sensor array is presented to guarantee the accuracy of the 3D measurement. Furthermore, an automatic registration technique is also proposed for aligning multiple range images ta...
Entropy of three-dimensional BTZ black holes
Institute of Scientific and Technical Information of China (English)
GAO; Changjun; SHEN; Yougen
2004-01-01
The entropies of scalar field and neutrino field are calculated in the back ground of three-dimensional BTZ black hole.Considering statistical physics,we propose not to consider the superraradiant modes for bosons(Fermion fields do not displaysup perradiance).In fact,the nonsuperradiant modes do contribute exactly the area entropy for both bosons and fermions.The result shows that the neutrino field entropy is 3/2 times the scalar one.
Three-Dimensional Simulations of Deep-Water Breaking Waves
Brucker, Kyle A; Dommermuth, Douglas G; Adams, Paul
2014-01-01
The formulation of a canonical deep-water breaking wave problem is introduced, and the results of a set of three-dimensional numerical simulations for deep-water breaking waves are presented. In this paper fully nonlinear progressive waves are generated by applying a normal stress to the free surface. Precise control of the forcing allows for a systematic study of four types of deep-water breaking waves, characterized herein as weak plunging, plunging, strong plunging, and very strong plunging.
Development of three-dimensional memory (3D-M)
Yu, Hong-Yu; Shen, Chen; Jiang, Lingli; Dong, Bin; Zhang, Guobiao
2016-10-01
Since the invention of 3-D ROM in 1996, three-dimensional memory (3D-M) has been under development for nearly two decades. In this presentation, we'll review the 3D-M history and compare different 3D-Ms (including 3D-OTP from Matrix Semiconductor, 3D-NAND from Samsung and 3D-XPoint from Intel/Micron).
Three dimensional momentum distributions of recoil-ions and photoelectrons
Energy Technology Data Exchange (ETDEWEB)
Ullrich, J.; Schmitt, W. [Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Doerner, R.; Jagutzki, O.; Mergel, V.; Moshammer, R.; Schmidt-Boecking, H.; Spielberger, L.; Unverzagt, M.; Vogt, T. [Frankfurt Univ. (Germany). Inst. fuer Kernphysik
1996-10-01
A novel high-resolution technique, the Multi-Electron-Recoil-Ion Momentum Spectroscopy, allows to determine in coincidence the three dimensional momentum vectors of the ion and up to three electrons created in any photo ionization event. At a solid angle of 4 {pi} the energy-resolutions for ions and electrons are {+-}2{mu} eV and {+-}10 meV, respectively. (orig.)
Three-dimensional echocardiographic assessment of atrial septal defects
Directory of Open Access Journals (Sweden)
Charles German
2015-01-01
Full Text Available Echocardiography provides a useful tool in the diagnosis of many congenital heart diseases, including atrial septal defects, and aids in further delineating treatment options. Although two-dimensional echocardiography has been the standard of care in this regard, technological advancements have made three-dimensional echocardiography possible, and the images obtained in this new imaging modality are able to accurately portray the morphology, location, dimensions, and dynamic changes of defects and many other heart structures during the cardiac cycle.
Three-dimensional surface reconstruction from multistatic SAR images.
Rigling, Brian D; Moses, Randolph L
2005-08-01
This paper discusses reconstruction of three-dimensional surfaces from multiple bistatic synthetic aperture radar (SAR) images. Techniques for surface reconstruction from multiple monostatic SAR images already exist, including interferometric processing and stereo SAR. We generalize these methods to obtain algorithms for bistatic interferometric SAR and bistatic stereo SAR. We also propose a framework for predicting the performance of our multistatic stereo SAR algorithm, and, from this framework, we suggest a metric for use in planning strategic deployment of multistatic assets.
Sectional and Ricci Curvature for Three-Dimensional Lie Groups
Directory of Open Access Journals (Sweden)
Gerard Thompson
2016-01-01
Full Text Available Formulas for the Riemann and Ricci curvature tensors of an invariant metric on a Lie group are determined. The results are applied to a systematic study of the curvature properties of invariant metrics on three-dimensional Lie groups. In each case the metric is reduced by using the automorphism group of the associated Lie algebra. In particular, the maximum and minimum values of the sectional curvature function are determined.
THE SYSTEM SIMULATION OF THREE-DIMENSIONAL RADAR
Institute of Scientific and Technical Information of China (English)
Zhang Wei; Xiang Jingcheng; Wang Xuegang
2004-01-01
To provide a test platform for Electronic Warfare (EW) system, it is needed to simulate the radar received Intermediate Frequency (IF) signals and radar system functions.This letter gives a description of a radar system simulation software developed for frequencyphase scanning three-dimensional (3-D) radar. Experimental results prove that the software could be used for system evaluation and for training purposes as an attractive alternative to real EW system.
IF signals simulation of three-dimensional radar
Institute of Scientific and Technical Information of China (English)
Zhang Wei; Wang Xuegang; Zhu Zhaoda
2008-01-01
Based on the analysis of the principles of frequency-phase scanning 3-D (three-dimensional) radar and the scattering mechanism of 3-D radar, the target and clutter IF (intermediate frequency) signals model of frequencyphase scanning 3-D radar is presented. The IF signals model of different channels of 3-D radar is presented in one simple formula in which complex waveform effects are considered. The simulation results obtained during tests are also provided in the end.
Electric transport in three-dimensional Skyrmion/monopole crystal
Zhang, Xiao-Xiao; Mishchenko, Andrey S.; De Filippis, Giulio; Nagaosa, Naoto
2016-01-01
We study theoretically the transport properties of a three-dimensional spin texture made from three orthogonal helices, which is essentially a lattice of monopole-antimonopole pairs connected by Skyrmion strings. This spin structure is proposed for MnGe based on the neutron scattering experiment as well as the Lorentz transmission electron microscopy observation. Equipped with a sophisticated spectral analysis method, we adopt finite temperature Green's function technique to calculate the lon...
Three-dimensional nonparaxial beams in parabolic rotational coordinates.
Deng, Dongmei; Gao, Yuanmei; Zhao, Juanying; Zhang, Peng; Chen, Zhigang
2013-10-01
We introduce a class of three-dimensional nonparaxial optical beams found in a parabolic rotational coordinate system. These beams, representing exact solutions of the nonparaxial Helmholtz equation, have inherent parabolic symmetries. Assisted with a computer-generated holography, we experimentally demonstrate the generation of different modes of these beams. The observed transverse beam patterns along the propagation direction agree well with those from our theoretical predication.
A practical three-dimensional dosimetry system for radiation therapy
Guo, Pengyi; Adamovics, John; Oldham, Mark
2006-01-01
There is a pressing need for a practical three-dimensional (3D) dosimetry system, convenient for clinical use, and with the accuracy and resolution to enable comprehensive verification of the complex dose distributions typical of modern radiation therapy. Here we introduce a dosimetry system that can achieve this challenge, consisting of a radiochromic dosimeter (PRESAGE™) and a commercial optical computed tomography (CT) scanning system (OCTOPUS™). PRESAGE™ is a transparent material with com...
Three-dimensional conceptual model for service-oriented simulation
Wang, Wenguang; Zander, Justyna; Zhu, Yifan; 10.1631/jzus.A0920258
2009-01-01
In this letter, we propose a novel three-dimensional conceptual model for an emerging service-oriented simulation paradigm. The model can be used as a guideline or an analytic means to find the potential and possible future directions of the current simulation frameworks. In particular, the model inspects the crossover between the disciplines of modeling and simulation, service-orientation, and software/systems engineering. Finally, two specific simulation frameworks are studied as examples.
Three-Dimensional DNA Nanostructures Assembled from DNA Star Motifs.
Tian, Cheng; Zhang, Chuan
2017-01-01
Tile-based DNA self-assembly is a promising method in DNA nanotechnology and has produced a wide range of nanostructures by using a small set of unique DNA strands. DNA star motif, as one of DNA tiles, has been employed to assemble varieties of symmetric one-, two-, three-dimensional (1, 2, 3D) DNA nanostructures. Herein, we describe the design principles, assembly methods, and characterization methods of 3D DNA nanostructures assembled from the DNA star motifs.
On a three-dimensional implementation of the baker's transformation
Carrière, Philippe
2007-11-01
A three-dimensional, steady flow configuration intended to mimic the baker's map is studied by means of numerical simulation. The Poincaré sections computed from a finite element solution of the velocity field show that the behavior is dominated by chaotic advection. The value obtained for the Lyapunov exponent is very close to the theoretical value of ln2 predicted by the baker's map.
Powder blasting for three-dimensional microstructuring of glass
Belloy, E.; Sayah, A.; M.A.M. Gijs
2000-01-01
We report on powder blasting as a promising technology for the three-dimensional structuring of brittle materials. We investigate the basic parameters of this process, which is based on the erosion of a masked substrate by a high-velocity eroding powder beam, using glass substrates. We study the effect of various parameters on the etching rate, like the powder velocity and the mask feature size, which induces geometrical effects to the erosion process. We introduce oblique powder blasting and...
Three-dimensional magnetic recording using ferromagnetic resonance
Suto, Hirofumi; Kudo, Kiwamu; Nagasawa, Tazumi; Kanao, Taro; Mizushima, Koichi; Sato, Rie
2016-07-01
To meet the ever-increasing demand for data storage, future magnetic recording devices will need to be made three-dimensional by implementing multilayer recording. In this article, we present methods of detecting and manipulating the magnetization direction of a specific layer selectively in a vertically stacked multilayer magnetic system, which enable layer-selective read and write operations in three-dimensional magnetic recording devices. The principle behind the methods is ferromagnetic resonance excitation in a microwave magnetic field. By designing each magnetic recording layer to have a different ferromagnetic resonance frequency, magnetization excitation can be induced individually in each layer by tuning the frequency of an applied microwave magnetic field, and this selective magnetization excitation can be utilized for the layer-selective operations. Regarding media for three-dimensional recording, when layers of a perpendicular magnetic material are vertically stacked, dipolar interaction between multiple recording layers arises and is expected to cause problems, such as degradation of thermal stability and switching field distribution. To solve these problems, we propose the use of an antiferromagnetically coupled structure consisting of hard and soft magnetic layers. Because the stray fields from these two layers cancel each other, antiferromagnetically coupled media can reduce the dipolar interaction.
Three dimensional self-assembly at the nanoscale
Gracias, D. H.
2013-05-01
At the nanoscale, three dimensional manipulation and assembly becomes extremely challenging and also cost prohibitive. Self-assembly provides an attractive and possibly the only highly parallel methodology to structure truly three dimensional patterned materials and devices at this size scale for applications in electronics, optics, robotics and medicine. This is a concise review along with a perspective of an important and exciting field in nanotechnology and is related to a Nanoengineering Pioneer Award that I received at this SPIE symposium for my contributions to the 3D selfassembly of nanostructures. I detail a historical account of 3D self-assembly and outline important developments in this area which is put into context with the larger research areas of 3D nanofabrication, assembly and nanomanufacturing. A focus in this review is on our work as it relates to the self-assembly with lithographically patterned units; this approach provides a means for heterogeneous integration of periodic, curved and angled nanostructures with precisely defined three dimensional patterns.
Interaction of two three-dimensional explosion bubbles
Institute of Scientific and Technical Information of China (English)
YAO Xiong-liang; ZHANG A-man; LIU Yu-chen
2007-01-01
The interaction of two underwater explosion bubbles was mathematically analyzed in this paper. Based on the assumption of potential flow, high-order curved elements were used to discretize the boundary integral equation and solve it. Assuming that gas inside the bubble follows the isentropic rule,the Euler-Lagrange method was used to trace the evolution of the bubble, and when calculating the singular integral, the singularity of the double-layer singular integral was eliminated by reconstructing a principal-value integral of double-layer potential so that a more precise result could be obtained. Elastic mesh technique (EMT) was also used when tracing the evolution of the bubble interface, and numerical smoothing wasn't needed. A comparison of calculations using this three-dimensional model with results of the Reyleigh-Plesset bubble model shows that the three-dimensional model and calculation method in this paper is practical. This three-dimensional model was applied to simulate the interaction of two bubbles under the action of gravity, and the dynamic characteristics of two bubbles near the surface was also analyzed. Bubbles influenced by surface effects and gravity present severe non-linearity. This paper provides a reference for research into the dynamics of multi-bubbles.
Three-dimensional illumination system for tomographic particle image velocimetry
Zhang, Fen; Song, Yang; Qu, Xiangju; Ji, Yunjing; Li, Zhenhua; He, Anzhi
2016-10-01
Tomographic particle image velocimetry (Tomo-PIV) is a new developed technique for three-component threedimensional (3C-3D) velocity measurement of the flow field based on the optical tomographic reconstruction method, and has been received extensive attention of the related industries. Three-dimensional light source illuminating the tracer particles of flow field is a critical application for tomographic particle image velocimetry. Three-dimensional light source not only determines the size of measurement volume and the range of the scope of application, but also has a great influence on the image quality. In this work, we propose a rectangular light amplification system using powell lens, prisms and two reflectors. The system can be optimized if given the system parameters based on the theoretical model. The rectangular light amplification system will be verified experimentally by measuring the cross section size of the illuminated light source. A 60mm×25mm cross section of rectangular three-dimensional light source can be obtained by using the rectangular light amplification system. The experiments demonstrate the the feasibility the proposed system.
Three-dimensional robust diving guidance for hypersonic vehicle
Zhu, Jianwen; Liu, Luhua; Tang, Guojian; Bao, Weimin
2016-01-01
A novel three-dimensional robust guidance law based on H∞ filter and H∞ control is proposed to meet the constraints of the impact accuracy and the flight direction under process disturbances for the dive phase of hypersonic vehicle. Complete three-dimensional coupling relative motion equations are established and decoupled into linear ones by feedback linearization to simplify the design process of the further guidance law. Based on the linearized equations, H∞ filter is introduced to eliminate the measurement noises of line-of-sight angles and estimate the angular rates. Furthermore, H∞ robust control is well employed to design guidance law, and the filtered information is used to generate guidance commands to meet the guidance goal accurately and robustly. The simulation results of CAV-H indicate that the proposed three-dimensional equations can describe the coupling character more clearly than the traditional decoupling guidance, and the proposed guidance strategy can guide the vehicle to satisfy different multiple constraints with high accuracy and robustness.
Three-dimensional laser window formation for industrial application
Verhoff, Vincent G.; Kowalski, David
1993-01-01
The NASA Lewis Research Center has developed and implemented a unique process for forming flawless three-dimensional, compound-curvature laser windows to extreme accuracies. These windows represent an integral component of specialized nonintrusive laser data acquisition systems that are used in a variety of compressor and turbine research testing facilities. These windows are molded to the flow surface profile of turbine and compressor casings and are required to withstand extremely high pressures and temperatures. This method of glass formation could also be used to form compound-curvature mirrors that would require little polishing and for a variety of industrial applications, including research view ports for testing devices and view ports for factory machines with compound-curvature casings. Currently, sodium-alumino-silicate glass is recommended for three-dimensional laser windows because of its high strength due to chemical strengthening and its optical clarity. This paper discusses the main aspects of three-dimensional laser window formation. It focuses on the unique methodology and the peculiarities that are associated with the formation of these windows.
Formation of three-dimensional Parylene C structures via thermoforming
Kim, B. J.; Chen, B.; Gupta, M.; Meng, E.
2014-06-01
The thermoplastic nature of Parylene C is leveraged to enable the formation of three-dimensional structures using a thermal forming (thermoforming) technique. Thermoforming involves the heating of Parylene films above its glass transition temperature while they are physically confined in the final desired conformation. Micro and macro scale three-dimensional structures composed of Parylene thin films were developed using the thermoforming process, and the resulting chemical and mechanical changes to the films were characterized. No large changes to the surface and bulk chemistries of the polymer were observed following the thermoforming process conducted in vacuum. Heat treated structures exhibited increased stiffness by a maximum of 37% depending on the treatment temperature, due to an increase in crystallinity of the Parylene polymer. This study revealed important property changes resulting from the process, namely (1) the development of high strains in thermoformed areas of small radii of curvature (30-90 µm) and (2) ˜1.5% bulk material shrinkage in thermoformed multilayered Parylene-Parylene and Parylene-metal-Parylene films. Thermoforming is a simple process whereby three-dimensional structures can be achieved from Parylene C-based thin film structures with tunable mechanical properties as a function of treatment temperature.
Springback prediction of three-dimensional variable curvature tube bending
Directory of Open Access Journals (Sweden)
Shen Zhang
2016-03-01
Full Text Available The springback phenomenon of tube bending occurs consequentially after unloading, which will affect the manufacturing accuracy and processing efficiency of the tubular products. In this article, the bending and springback processes of minor-diameter thick-walled tube are simulated by ABAQUS to reveal the springback laws. The springback prediction of three-dimensional variable curvature bent tube is projected on each discrete osculating and rectifying plane, and then the three-dimensional problem can be transformed into two dimensions. The mathematic relationship of the radius before and after springback in the plane is built by approximate pure bending springback experiments. The springback on such planes is transformed into three dimensions. The tube axes are merged by first-order geometric (G1 continuity and then compensated with the modified function according to the axis complexity, so as to establish mathematic analytic model for springback prediction of three-dimensional variable curvature tube bending. Finally, the feasibility, reliability, and accuracy of the model are verified by finite element method and experiments.
Three dimensional modelling of ICRF launchers for fusion devices
Carter, M. D.; Rasmussen, D. A.; Ryan, P. M.; Hanson, G. R.; Stallings, D. C.; Batchelor, D. B.; Bigelow, T. S.; England, A. C.; Hoffman, D. J.; Murakami, M.; Wang, C. Y.; Wilgen, J. B.; Rogers, J. H.; Wilson, J. R.; Majeski, R.; Schilling, G.
1996-02-01
The three dimensional (3-D) nature of antennas for fusion applications in the ion cyclotron range of frequencies (ICRF) requires accurate modelling to design and analyse new antennas. In this article, analysis and design tools for radiofrequency (RF) antennas are successfully benchmarked with experiment, and the 3-D physics of the launched waves is explored. The systematic analysis combines measured density profiles from a reflectometer system, transmission line circuit modelling, detailed 3-D magnetostatics modelling and a new 3-D electromagnetic antenna model including plasma. This analysis gives very good agreement with measured loading data from the Tokamak Fusion Test Reactor (TFTR) Bay-M antenna, thus demonstrating the validity of the analysis for the design of new RF antennas. The 3-D modelling is contrasted with 2-D models, and significant deficiencies are found in the latter. The 2-D models are in error by as much as a factor of 2 in real and reactive loading, even after they are corrected for the most obvious 3-D effects. Three dimensional effects play the most significant role at low parallel wavenumbers, where the launched power spectrum can be quite different from the predictions of 2-D models. Three dimensional effects should not be ignored for many RF designs, especially those intended for fast wave current drive
Peterson, Diana Coomes; Mlynarczyk, Gregory S A
2016-11-01
This study examined whether student learning outcome measures are influenced by the addition of three-dimensional and digital teaching tools to a traditional dissection and lecture learning format curricula. The study was performed in a semester long graduate level course that incorporated both gross anatomy and neuroanatomy curricula. Methods compared student examination performance on material taught using lecture and cadaveric dissection teaching tools alone or lecture and cadaveric dissection augmented with computerized three-dimensional teaching tools. Additional analyses were performed to examine potential correlations between question difficulty and format, previous student performance (i.e., undergraduate grade point average), and a student perception survey. The results indicated that students performed better on material in which three-dimensional (3D) technologies are utilized in conjunction with lecture and dissection methodologies. The improvement in performance was observed across the student population primarily on laboratory examinations. Although, student performance was increased, students did not perceive that the use of the additional 3D technology significantly influenced their learning. The results indicate that the addition of 3D learning tools can influence long-term retention of gross anatomy material and should be considered as a beneficial supplement for anatomy courses. Anat Sci Educ 9: 529-536. © 2016 American Association of Anatomists.
Three-dimensional appearance of the lips muscles with three-dimensional isotropic MRI: in vivo study
Energy Technology Data Exchange (ETDEWEB)
Olszewski, Raphael; Reychler, H. [Universite Catholique de Louvain, Department of Oral and Maxillofacial Surgery, Cliniques Universitaires Saint Luc, Brussels (Belgium); Liu, Y.; Xu, T.M. [Peking University School and Hospital of Stomatology, Department of Orthodontics, Beijing (China); Duprez, T. [Universite Catholique de Louvain, Department of Radiology, Cliniques Universitaires Saint Luc, Brussels (Belgium)
2009-06-15
Our knowledge of facial muscles is based primarily on atlases and cadaveric studies. This study describes a non-invasive in vivo method (3D MRI) for segmenting and reconstructing facial muscles in a three-dimensional fashion. Three-dimensional (3D), T1-weighted, 3 Tesla, isotropic MRI was applied to a subject. One observer performed semi-automatic segmentation using the Editor module from the 3D Slicer software (Harvard Medical School, Boston, MA, USA), version 3.2. We were able to successfully outline and three-dimensionally reconstruct the following facial muscles: pars labialis orbicularis oris, m. levatro labii superioris alaeque nasi, m. levator labii superioris, m. zygomaticus major and minor, m. depressor anguli oris, m. depressor labii inferioris, m. mentalis, m. buccinator, and m. orbicularis oculi. 3D reconstruction of the lip muscles should be taken into consideration in order to improve the accuracy and individualization of existing 3D facial soft tissue models. More studies are needed to further develop efficient methods for segmentation in this field. (orig.)
Parallax scanning methods for stereoscopic three-dimensional imaging
Mayhew, Christopher A.; Mayhew, Craig M.
2012-03-01
Under certain circumstances, conventional stereoscopic imagery is subject to being misinterpreted. Stereo perception created from two static horizontally separated views can create a "cut out" 2D appearance for objects at various planes of depth. The subject volume looks three-dimensional, but the objects themselves appear flat. This is especially true if the images are captured using small disparities. One potential explanation for this effect is that, although three-dimensional perception comes primarily from binocular vision, a human's gaze (the direction and orientation of a person's eyes with respect to their environment) and head motion also contribute additional sub-process information. The absence of this information may be the reason that certain stereoscopic imagery appears "odd" and unrealistic. Another contributing factor may be the absence of vertical disparity information in a traditional stereoscopy display. Recently, Parallax Scanning technologies have been introduced, which provide (1) a scanning methodology, (2) incorporate vertical disparity, and (3) produce stereo images with substantially smaller disparities than the human interocular distances.1 To test whether these three features would improve the realism and reduce the cardboard cutout effect of stereo images, we have applied Parallax Scanning (PS) technologies to commercial stereoscopic digital cinema productions and have tested the results with a panel of stereo experts. These informal experiments show that the addition of PS information into the left and right image capture improves the overall perception of three-dimensionality for most viewers. Parallax scanning significantly increases the set of tools available for 3D storytelling while at the same time presenting imagery that is easy and pleasant to view.
Three-dimensional stochastic seepage field for embankment engineering
Directory of Open Access Journals (Sweden)
Ya-jun WANG
2009-03-01
Full Text Available Owing to the complexity of geo-engineering seepage problems influenced by different random factors, three-dimensional simulation and analysis of the stochastic seepage field plays an important role in engineering applications. A three-dimensional anisotropic heterogeneous steady random seepage model was developed on the basis of the finite element method. A statistical analysis of the distribution characteristics of soil parameters sampled from the main embankment of the Yangtze River in the Southern Jingzhou zone of China was conducted. The Kolomogorov-Smirnov test verified the statistical hypothesis that the permeability coefficient tensor has a Gaussian distribution. With the help of numerical analysis of the stochastic seepage field using the developed model, various statistical and random characteristics of the stochastic seepage field of the main embankment of the Yangtze River in the Southern Jingzhou zone of China were investigated. The model was also examined with statistical testing. Through the introduction of random variation of the upstream and downstream water levels into the model, the effects of the boundary randomness due to variation of the downstream and upstream water levels on the variation of simulated results presented with a vector series of the random seepage field were analyzed. Furthermore, the combined influence of the variation of the soil permeability coefficient and such seepage resistance measures as the cut-off wall and relief ditch on the hydraulic head distribution was analyzed and compared with the results obtained by determinate analysis. Meanwhile, sensitivities of the hydraulic gradient and downstream exit height to the variation of boundary water level were studied. The validity of the simulated results was verified by stochastic testing and measured data. The developed model provides more detail and a full stochastic algorithm to characterize and analyze three-dimensional stochastic seepage field problems
Three-dimensional stochastic seepage field for embankment engineering
Institute of Scientific and Technical Information of China (English)
Ya-jun WANG; Wo-hua ZHANG; Chang-yu WU; Da-chun REN
2009-01-01
Owing to the complexity of get-engineering seepage problems influenced by different random factors, three-dimensional simulation and analysis of the stochastic seepage field plays an important role in engineering applications. A three-dimensional anisotropic heterogeneous steady random seepage model was developed on the basis of the finite element method. A statistical analysis of the distribution characteristics of soil parameters sampled from the main embankment of the Yangtze River in the Southern Jingzhou zone of China was conducted. The Kolomogorov-Smimov test verified the statistical hypothesis that the permeability coefficient tensor has a Gaussian distribution. With the help of numerical analysis of the stochastic seepage field using the developed model, various statistical and random characteristics of the stochastic seepage field of the main embankment of the Yangtze River in the Southern Jingzhou zone of China were investigated. The model was also examined with statistical testing. Through the introduction of random variation of the upstream and downstream water levels into the model, the effects of the boundary randomness due to variation of the downstream and upstream water levels on the variation of simulated results presented with a vector series of the random seepage field were analyzed. Furthermore, the combined influence of the variation of the soil permeability coefficient and such seepage resistance measures as the cut-off wall and relief ditch on the hydraulic head distribution was analyzed and compared with the results obtained by determinate analysis. Meanwhile, sensitivities of the hydraulic gradient and downstream exit height to the variation of boundary water level were studied. The validity of the simulated results was verified by stochastic testing and measured data. The developed model provides more detail and a full stochastic algorithm to characterize and analyze three-dimensional stochastic seepage field problems.
Three-dimensional numerical modeling of nearshore circulation
Institute of Scientific and Technical Information of China (English)
SUN Detong
2008-01-01
A three-dimensional nearshore circulation model was developed by coupling CH3D, a three-dimensional hydrodynamic model and REF/DIF, a nearsbore wave transformation model. The model solves the three-dimensional wave-averaged equations of motion. Wave-induced effects on circulation were introduced in the form of radiation stresses, wave-induced mass transport, wave-induced enhancement of bottom friction and wave-induced turbulent mixing. Effects of breaking waves were considered following Svendsen (1984a and 1984b) and Stive and Wind (1986). The model was successfully tested against the analytical solution of longshore currents by Longuet and Higgins (1970). The model successfully simulated the undertow as observed in a laboratory experiment by Stive and Wind (1982). In addition, the model was applied to a physical model by Mory and Hamm (1997) and successfully reproduced the eddy behind a detached breakwater as well as the longshore current on the open beach and the contiguous eddy in the open area of the wave tank. While the qualitative agreement between model results and experimental observations was very good, the quantitative agreement needs to be further improved. Albeit difficult to explain every discrepancy between the model re- suits and observations, in general, sources of errors are attributed to the lack of understanding and comprehensive description of following processes: (1) the horizontal and vertical distribution of radiation stress, especially for breaking waves; (2) the detailed structure of turbulence;(3)Wave-current interaction (not included at this moment) ; and (4)the wave- current boundary layer and the resulting bottom shear stress.
Case study - northern Prudhoe Bay development planning using three-dimensional seismic data
Energy Technology Data Exchange (ETDEWEB)
Walsh, T.P.
1988-01-01
Three three-dimensional seismic surveys have been acquired by the Prudhoe Bay unit working interest owners for the purpose of development planning. The most recent of these surveys, the Northern Tier three-dimensional seismic survey, was acquired in 1986 and provides the subject matter for this paper. A new dual-source recording method was extensively field tested prior to its application in production data acquisition. This method of acquisition reduced costs by approximately 25% as compared to conventional (single-source) recording. The 54 mi/sup 2/ subsurface coverage area consists of 118,000 depth points, and cost $4.2 million for acquisition and processing, roughly twice the cost of two development wells in this area. Interactive interpretation of the data volume helps in placing the 80-acre infill wells in the main development area, and helps to identify areas of development potential in the structurally complex northern portion of the field. Traverses are created along the proposed paths of horizontal and high-angle wells to reduce the risk of structural complications during drilling and completion. Predicting target depths to within +- 25 ft and ensuring standoff from faults of 300 - 500 ft are the primary goals of the interpretation. Interaction among the various geoscience and engineering disciplines is common in all phases of this project.
Three-dimensional visual illusion of graphic painting
Institute of Scientific and Technical Information of China (English)
于静
2012-01-01
Visual illusion is the visual design of a special category.It is a set of technology and art in one of a unique form of artistic expression.Visual illusion can give people a taste of the spirit, with strong cultural con- tent and artistic appeal.So by this way of painting, it has a clever and unique perspective. Aspect If the plane can be realistic paintings to life, then the three-dimensional, two-dimensional space can be called even more powerful by aspects.
Three-dimensional reconstruction of the rat nephron
DEFF Research Database (Denmark)
Christensen, Erik Ilsø; Grann, Birgitte; Kristoffersen, Inger B.;
2014-01-01
This study gives a three-dimensional (3D) structural analysis of rat nephrons and their connections to collecting ducts. Approximately 4,500 2.5-μm-thick serial sections from the renal surface to the papillary tip were obtained from each of 3 kidneys of Wistar rats. Digital images were recorded...... and aligned into three image stacks and traced from image to image. Short-loop nephrons (SLNs), long-loop nephrons (LLNs), and collecting ducts (CDs) were reconstructed in 3D. We identified a well-defined boundary between the outer stripe and the inner stripe of the outer medulla corresponding...
Integrated three-dimensional reconstruction using reflectance fields
Directory of Open Access Journals (Sweden)
Maria-Luisa Rosas
2012-01-01
Full Text Available A method to obtain three-dimensional data of real-world objects by integrating their material properties is presented. The material properties are defined by capturing the Reflectance Fields of the real-world objects. It is shown, unlike conventional reconstruction methods, the method is able to use the reflectance information to recover surface depth for objects having a non-Lambertian surface reflectance. It is, for recovering 3D data of objects exhibiting an anisotropic BRDF with an error less than 0.3%.
Three-dimensional imaging for a very large excavator
Energy Technology Data Exchange (ETDEWEB)
Roberts, J.; Winstanley, G.; Corke, P. [CSIRO, Kenmore, Qld. (Australia). Manufacture and & Infrastructure Technology
2003-08-01
We describe the development of a three-dimensional (3D) imaging system for a 3500 tonne mining machine (dragline). Draglines are large walking cranes used for removing the dirt that covers a coal seam. Our group has been developing a dragline swing automation system since 1994. The system so far has been 'blind' to its external environment. The work presented in this paper attempts to give the dragline an ability to sense its surroundings. A 3D digital terrain map (DTM) is created from data obtained from a two-dimensional laser scanner while the dragline swings. Experimental data from an operational dragline are presented.
New Discrete Element Models for Three-Dimensional Impact Problems
Institute of Scientific and Technical Information of China (English)
SHAN Li; CHENG Ming; LIU Kai-xin; LIU Wei-Fu; CHEN Shi-Yang
2009-01-01
Two 3-D numerical models of the discrete element method(DEM)for impact problems are proposed.The models can calculate not only the impact problems of continuum and non-continuum,but also the transient process from continuum to non-continuum.The stress wave propagation in a concrete block and a dynamic splitting process of a marble disc under impact loading are numerically simulated with the proposed models.By comparing the numerical results with the corresponding results obtained by the finite element method(FEM)and the experiments,it is proved that the models are reliable for three-dimensional impact problems.
Three-dimensional versus two-dimensional vision in laparoscopy
DEFF Research Database (Denmark)
Sørensen, Stine Maya Dreier; Savran, Mona M; Konge, Lars;
2016-01-01
BACKGROUND: Laparoscopic surgery is widely used, and results in accelerated patient recovery time and hospital stay were compared with laparotomy. However, laparoscopic surgery is more challenging compared with open surgery, in part because surgeons must operate in a three-dimensional (3D) space...... through a two-dimensional (2D) projection on a monitor, which results in loss of depth perception. To counter this problem, 3D imaging for laparoscopy was developed. A systematic review of the literature was performed to assess the effect of 3D laparoscopy. METHODS: A systematic search of the literature...
CATIA Core Tools Computer Aided Three-Dimensional Interactive Application
Michaud, Michel
2012-01-01
CATIA Core Tools: Computer-Aided Three-Dimensional Interactive Application explains how to use the essential features of this cutting-edge solution for product design and innovation. The book begins with the basics, such as launching the software, configuring the settings, and managing files. Next, you'll learn about sketching, modeling, drafting, and visualization tools and techniques. Easy-to-follow instructions along with detailed illustrations and screenshots help you get started using several CATIA workbenches right away. Reverse engineering--a valuable product development skill--is also covered in this practical resource.
Three dimensional free convection couette flow with transpiration cooling
Institute of Scientific and Technical Information of China (English)
无
2006-01-01
Free convection flow between two vertical parallel plates with transverse sinusoidal injection of the fluid at the stationary plate and its corresponding removal by constant suction through the plate in uniform motion has been analyzed. Due to this type of injection velocity, the flow becomes three-dimensional. Analytical expressions for the velocity, temperature, skin friction and rate of heat transfer were obtained. The important characteristics of the problem, namely the skin friction and the rate of heat transfer are discussed in detail with the help of graphs.
The Electron in Three-Dimensional Momentum Space
Mantovani, L.; Bacchetta, A.; Pasquini, B.
2016-07-01
We study the electron as a system composed of an electron and a photon and derive the leading-twist transverse-momentum-dependent distribution functions for both the electron and photon in the dressed electron, thereby offering a three-dimensional description of the dressed electron in momentum space. To obtain the distribution functions, we apply both the formalism of light-front wave function overlap representation and the diagrammatic approach; we discuss the comparison of our results between light-cone gauge and Feynman gauge, discussing the role of the Wilson lines to obtain gauge-independent results. We provide examples of plots of the computed distributions.
Three-dimensional characterization of stress corrosion cracks
DEFF Research Database (Denmark)
Lozano-Perez, S.; Rodrigo, P.; Gontard, Lionel Cervera
2011-01-01
Understanding crack propagation and initiation is fundamental if stress corrosion cracking (SCC) mechanisms are to be understood. However, cracking is a three-dimensional (3D) phenomenon and most characterization techniques are restricted to two-dimensional (2D) observations. In order to overcome...... the best spatial resolution. To illustrate the power of these techniques, different parts of dominant stress corrosion cracks in Ni-alloys and stainless steels have been reconstructed in 3D. All relevant microstructural features can now be studied in detail and its relative orientation respect...
The three-dimensional crystal structure of cholera toxin
Energy Technology Data Exchange (ETDEWEB)
Zhang, Rong-Guang; Westbrook, M.L.; Nance, S.; Spangler, B.D. [Argonne National Lab., IL (United States); Scott, D.L. [Yale Univ., New Haven, CT (United States). Dept. of Molecular Biophysics and Biochemistry; Westbrook, E.M. [Northwestern Univ., Evanston, IL (United States)
1996-02-01
The clinical manifestations of cholera are largely attributable to the actions of a secreted hexameric AB{sub 5} enterotoxin (choleragen). We have solved the three-dimensional structure of choleragen at 2.5 {Angstrom} resolution and compared the refined coordinates with those of choleragenoid (isolated B pentamer) and the heat-labile enterotoxin from Escherichia coli (LT). The crystalline coordinates provide a detailed view of the stereochemistry implicated in binding to GM1 gangliosides and in carrying out ADP-ribosylation. The A2 chain of choleragen, in contrast to that of LT, is a nearly continuous {alpha}-helix with an interpretable carboxyl tail.
Integrating three-dimensional printing and nanotechnology for musculoskeletal regeneration
Nowicki, Margaret; Castro, Nathan J.; Rao, Raj; Plesniak, Michael; Zhang, Lijie Grace
2017-09-01
The field of tissue engineering is advancing steadily, partly due to advancements in rapid prototyping technology. Even with increasing focus, successful complex tissue regeneration of vascularized bone, cartilage and the osteochondral interface remains largely illusive. This review examines current three-dimensional printing techniques and their application towards bone, cartilage and osteochondral regeneration. The importance of, and benefit to, nanomaterial integration is also highlighted with recent published examples. Early-stage successes and challenges of recent studies are discussed, with an outlook to future research in the related areas.
Methods for preparation of three-dimensional bodies
Energy Technology Data Exchange (ETDEWEB)
Mulligan, Anthony C [Tucson, AZ; Rigali, Mark J [Carlsbad, NM; Sutaria, Manish P [Malden, MA; Artz, Gregory J [Tucson, AZ; Gafner, Felix H [Tucson, AZ; Vaidyanathan, K Ranji [Tucson, AZ
2008-06-17
Processes for mechanically fabricating two and three-dimensional fibrous monolith composites include preparing a fibrous monolith filament from a core composition of a first powder material and a boundary material of a second powder material. The filament includes a first portion of the core composition surrounded by a second portion of the boundary composition. One or more filaments are extruded through a mechanically-controlled deposition nozzle onto a working surface to create a fibrous monolith composite object. The objects may be formed directly from computer models and have complex geometries.
Critical exponents of a three dimensional O(4) spin model
Kanaya, K; Kanaya, K; Kaya, S
1995-01-01
By Monte Carlo simulation we study the critical exponents governing the transition of the three-dimensional classical O(4) Heisenberg model, which is considered to be in the same universality class as the finite-temperature QCD with massless two flavors. We use the single cluster algorithm and the histogram reweighting technique to obtain observables at the critical temperature. After estimating an accurate value of the inverse critical temperature \\Kc=0.9360(1) we make non-perturbative estimates for various critical exponents by finite-size scaling analysis. They are in excellent agreement with those obtained with the 4-\\epsilon expansion method with errors reduced to about halves of them.
Complete wetting in the three-dimensional transverse Ising model
Harris, A. B.; Micheletti, C.; Yeomans, J. M.
1996-08-01
We consider a three-dimensional Ising model in a transverse magnetic field h and a bulk field H. An interface is introduced by an appropriate choice of boundary conditions. At the point ( H=0, h=0) spin configurations corresponding to different positions of the interface are degenerate. By studying the phase diagram near this multiphase point using quantum mechanical perturbation theory, we show that the quantum fluctuations, controlled by h, split the multiphase degeneracy giving rise to an infinite sequence of layering transitions.
A Novel Woodpile Three-Dimensional Terahertz Photonic Crystal
Institute of Scientific and Technical Information of China (English)
LIU Huan; YAO Jian-Quan; ZHENG Fang-Hua; XU De-Gang; WANG Peng
2007-01-01
A novel woodpile lattice structure is proposed. Based on plane wave expansion (PWE) method, the complete photonic band gaps (PBGs) of the novel woodpile three-dimensional (3D) terahertz (THz) photonic crystal (PC) with a decreasing symmetry relative to a face-centred-tetragonal (fct) symmetry are optimized by varying some structural parameters and the highest band gap ratio can reach 27.61%. Compared to the traditional woodpile lattice, the novel woodpile lattice has a wider range of the Riling ratios to gain high quality PBGs, which provides greater convenience for the manufacturing process. The novel woodpile 3D PC will be very promising for materials of THz functional components.
Three-dimensional wake potential in a streaming dusty plasma
Indian Academy of Sciences (India)
M Salahuddin; M K Islam; A K Banerjee; M Salimullah; S K Ghosh
2003-09-01
The oscillatory wake potential for a slowly moving or static test dust particulate in a ﬁnite temperature, collisionless and unmagnetized dusty plasma with a continuous ﬂow of ions and dust particles has been studied. The collective resonant interaction of the moving test particle with the low-frequency and low-phase-velocity dust-acoustic mode is the origin of the periodic attractive force between the like polarity particulates along and perpendicular to the streaming ions and dust grains resulting into dust-Coulomb crystal formation. This wake potential can explain the three-dimensional dust-Coulomb crystal formation in the laboratory conditions.
Ising Model Coupled to Three-Dimensional Quantum Gravity
Baillie, C F
1992-01-01
We have performed Monte Carlo simulations of the Ising model coupled to three-dimensional quantum gravity based on a summation over dynamical triangulations. These were done both in the microcanonical ensemble, with the number of points in the triangulation and the number of Ising spins fixed, and in the grand canoncal ensemble. We have investigated the two possible cases of the spins living on the vertices of the triangulation (``diect'' case) and the spins living in the middle of the tetrahedra (``dual'' case). We observed phase transitions which are probably second order, and found that the dual implementation more effectively couples the spins to the quantum gravity.
On three-dimensional trace anomaly from holographic local RG
Kikuchi, Ken; Suzuki, Akihiro
2016-01-01
Odd-dimensional quantum field theories (QFTs) can have nonzero trace anomalies if external fields are introduced and some ingredients needed to make Lorentz scalars with appropriate mass dimensions (or weights) are supplied. We have studied a three-dimensional QFT and explicitly computed the trace of the stress tensor using the holographic local renormalization group (RG). We have checked some properties of vector beta functions and the Wess-Zumino consistency condition, however, found the anomalies vanish on fixed points. We clarify what is responsible for the vanishing trace anomalies.
Seismic waves in a three-dimensional block medium
Aleksandrova, Nadezhda
2016-01-01
We study numerically the propagation of seismic waves in a three-dimensional block medium. The medium is modeled by a spatial lattice of masses connected by elastic springs and viscous dampers. We study Lamb's problem under a surface point vertical load. The cases of both step and pulse load are considered. The displacements and velocities are calculated for surface masses. The influence of the viscosity of the dampers on the attenuation of perturbations is studied. We compare our numerical results for the block medium with known analytical solutions for the elastic medium.
Electrified magnetic catalysis in three-dimensional topological insulators
Gorbar, E. V.; Miransky, V. A.; Shovkovy, I. A.; Sukhachov, P. O.
2016-09-01
The gap equations for the surface quasiparticle propagators in a slab of three-dimensional topological insulator in external electric and magnetic fields perpendicular to the slab surfaces are analyzed and solved. A different type of magnetic catalysis is revealed with the dynamical generation of both Haldane and Dirac gaps. Its characteristic feature manifests itself in the crucial role that the electric field plays in dynamical symmetry breaking and the generation of a Dirac gap in the slab. It is argued that, for a sufficiently large external electric field, the ground state of the system is a phase with a homogeneous surface charge density.
Three-dimensional imaging of direct-written photonic structures
Marshall, Graham D; Thayil, Anisha; Withford, Michael J; Booth, Martin
2010-01-01
Third harmonic generation microscopy has been used to analyze the morphology of photonic structures created using the femtosecond laser direct-write technique. Three dimensional waveguide arrays and waveguide-Bragg gratings written in fused-silica and doped phosphate glass were investigated. A sensorless adaptive optical system was used to correct the optical aberrations occurring in the sample and microscope system, which had a lateral resolution of less than 500 nm. This non-destructive testing method creates volume reconstructions of photonic devices and reveals details invisible to other linear microscopy and index profilometry techniques.
Three-dimensional array foci of generalized Fibonacci photon sieves
Zhang, Junyong; Zhu, Jianqiang; Lin, Zunqi
2015-01-01
We present a new kind of photon sieves on the basis of the generalized Fibonacci sequences. The required numbers and locations of axial foci can be designed by generalized Fibonacci photon sieves (GFiPS). Furthermore, the three-dimensional array foci can be controllable and adjustable by the optical path difference scaling factor (OPDSF) when the amplitude modulation is replaced with the phase modulation. Multi-focal technologies can be applied to nano-imaging, THZ, laser communications, direct laser writing, optical tweezers or atom trapping, etc.
Canonical and symplectic analysis for three dimensional gravity without dynamics
Escalante, Alberto
2016-01-01
In this paper a detailed Hamiltonian analysis of three-dimensional gravity without dynamics proposed by V. Hussain is performed. We report the complete structure of the constraints and the Dirac brackets are explicitly computed. In addition, the Faddeev-Jackiw symplectic approach is developed; we report the complete set of Faddeev-Jackiw constraints and the generalized brackets, then we show that the Dirac and the generalized Faddeev-Jackiw brackets coincide to each other. Finally, the similarities and advantages between Faddeev-Jackiw and Dirac's formalism are briefly discussed.
Role of retardation in three-dimensional relativistic equations
Energy Technology Data Exchange (ETDEWEB)
Lahiff, A.D.; Afnan, I.R. [Department of Physics, The Flinders University of South Australia, GPO Box 2100, Adelaide 5001 (Australia)
1997-11-01
Equal-time Green{close_quote}s function is used to derive a three-dimensional integral equation from the Bethe-Salpeter equation. The resultant equation, in the absence of antiparticles, is identical to the use of time-ordered diagrams, and has been used within the framework of {phi}{sup 2}{sigma} coupling to study the role of energy dependence and nonlocality when the two-body potential is the sum of {sigma} exchange and crossed {sigma} exchange. The results show that nonlocality and energy dependence make a substantial contribution to both the on-shell and off-shell amplitudes. {copyright} {ital 1997} {ital The American Physical Society}
Role of retardation in three-dimensional relativistic equations
Lahiff, A. D.; Afnan, I. R.
1997-11-01
Equal-time Green's function is used to derive a three-dimensional integral equation from the Bethe-Salpeter equation. The resultant equation, in the absence of antiparticles, is identical to the use of time-ordered diagrams, and has been used within the framework of φ2σ coupling to study the role of energy dependence and nonlocality when the two-body potential is the sum of σ exchange and crossed σ exchange. The results show that nonlocality and energy dependence make a substantial contribution to both the on-shell and off-shell amplitudes.
Three-Dimensional Model for Strip Hot Rolling
Institute of Scientific and Technical Information of China (English)
ZHANG Guo-min; XIAO Hong; WANG Chun-hua
2006-01-01
A three-dimensional model for strip hot rolling was developed, in which the plastic deformation of strip, the thermal crown of rolls, roll deflection and flattening were calculated by rigid-plastic finite element method, finite difference method, influential function method and elastic finite element method respectively. The roll wear was taken into consideration. The model can provide detailed information such as rolling pressure distribution, contact pressure distribution between backup rolls and work rolls, deflection and flattening of work rolls, lateral distribution of strip thickness, and lateral distribution of front and back tensions. The finish rolling on a 1 450 mm hot strip mill was simulated.
Three-dimensional dilatonic gravity's rainbow: Exact solutions
Hossein Hendi, Seyed; Eslam Panah, Behzad; Panahiyan, Shahram
2016-10-01
Deep relations of dark energy scenario and string theory results into dilaton gravity, on the one hand, and the connection between quantum gravity and gravity's rainbow, on the other hand, motivate us to consider three-dimensional dilatonic black hole solutions in gravity's rainbow. We obtain two classes of the solutions, which are polynomial and logarithmic forms. We also calculate conserved and thermodynamic quantities, and examine the first law of thermodynamics for both classes. In addition, we study thermal stability and show that one of the classes is thermally stable while the other one is unstable.
Discrete canonical analysis of three dimensional gravity with cosmological constant
Berra-Montiel, J
2014-01-01
We discuss the interplay between standard canonical analysis and canonical discretization in three-dimensional gravity with cosmological constant. By using the Hamiltonian analysis, we find that the continuum local symmetries of the theory are given by the on-shell space-time diffeomorphisms, which at the action level, corresponds to the Kalb-Ramond transformations. At the time of discretization, although this symmetry is explicitly broken, we prove that the theory still preserves certain gauge freedom generated by a constant curvature relation in terms of holonomies and the Gauss's law in the lattice approach.
Three-dimensional structure of brain tissue at submicrometer resolution
Saiga, Rino; Mizutani, Ryuta; Inomoto, Chie; Takekoshi, Susumu; Nakamura, Naoya; Tsuboi, Akio; Osawa, Motoki; Arai, Makoto; Oshima, Kenichi; Itokawa, Masanari; Uesugi, Kentaro; Takeuchi, Akihisa; Terada, Yasuko; Suzuki, Yoshio
2016-01-01
Biological objects are composed of submicrometer structures such as cells and organelles that are essential for their functions. Here, we report on three-dimensional X-ray visualization of cells and organelles at resolutions up to 100 nm by imaging microtomography (micro-CT) equipped with Fresnel zone plate optics. Human cerebral tissue, fruit fly cephalic ganglia, and Escherichia coli bacteria labeled with high atomic-number elements were embedded in epoxy resin and subjected to X-ray microtomography at the BL37XU and BL47XU beamlines of the SPring-8 synchrotron radiation facility. The obtained results indicated that soft tissue structures can be visualized with the imaging microtomography.
Three-dimensional measurement of a tightly focused laser beam
Directory of Open Access Journals (Sweden)
Xiangsheng Xie
2013-02-01
Full Text Available The spatial structure of a tightly focused light field is measured with a double knife-edge scanning method. The measurement method is based on the use of a high-quality double knife-edge fabricated from a right-angled silicon fragment mounted on a photodetector. The reconstruction of the three-dimensional structures of tightly focused spots is carried out with both uniform and partially obstructed linearly polarized incident light beams. The optical field distribution is found to deviate substantially from the input beam profile in the tightly focused region, which is in good agreement with the results of numerical simulations.
Synthesis of three-dimensional hierarchical cobalt hydroxide microstructures
Institute of Scientific and Technical Information of China (English)
无
2010-01-01
β-Co(OH)2 with three-dimensional (3-D) structures was prepared by a simple hydrothermal method. It was found that the amount of cetyltrimethylammonium bromide (CTAB), the pH value, and the reaction time all had an important influence on the formation of this morphology. The products were characterized by X-ray diffraction, energy-dispersive X-ray analysis, and scanning electron microscopy. A possible mechanism of the formation of the 3-D microstructures of β-Co(OH)2 was proposed.
Three-dimensional point spread function measurements of imaging spectrometers
Jemec, Jurij; Pernuš, Franjo; Likar, Boštjan; Bürmen, Miran
2017-09-01
Measuring the three-dimensional point spread function (3D PSF) of imaging spectrometers is a challenging task since it requires a small, monochromatic and bright source. Here we introduce a powerful and practical new approach for 3D PSF measurement on the basis of a bright virtual monochromatic point-like source, which is formed by a collimated light beam and a convex spherical mirror. The effectiveness of the proposed methodology is demonstrated and discussed through 3D PSF measurements of an acousto-optic tunable filter based imaging spectrometer.
Overlap distribution of the three-dimensional Ising model.
Berg, Bernd A; Billoire, Alain; Janke, Wolfhard
2002-10-01
We study the Parisi overlap probability density P(L)(q) for the three-dimensional Ising ferromagnet by means of Monte Carlo (MC) simulations. At the critical point, P(L)(q) is peaked around q=0 in contrast with the double peaked magnetic probability density. We give particular attention to the tails of the overlap distribution at the critical point, which we control over up to 500 orders of magnitude by using the multioverlap MC algorithm. Below the critical temperature, interface tension estimates from the overlap probability density are given and their approach to the infinite volume limit appears to be smoother than for estimates from the magnetization.
Modified Three-Dimensional Multicarrier Optical Prime Codes
Directory of Open Access Journals (Sweden)
Rajesh Yadav
2016-01-01
Full Text Available We propose a mathematical model for novel three-dimensional multicarrier optical codes in terms of wavelength/time/space based on the prime sequence algorithm. The proposed model has been extensively simulated on MATLAB for prime numbers (P to analyze the performance of code in terms of autocorrelation and cross-correlation. The simulated outcome resembles the mathematical model and gives better results over other methods available in the literature as far as autocorrelation and cross-correlation are concerned. The proposed 3D optical codes are more efficient in terms of cardinality, improved security, and providing quality of services.
Observation of three dimensional optical rogue waves through obstacles
Energy Technology Data Exchange (ETDEWEB)
Leonetti, Marco, E-mail: marco.leonetti@roma1.infn.it [Center for Life Nano Science@Sapienza, Istituto Italiano di Tecnologia, Viale Regina Elena, 291 00161 Roma (RM) (Italy); Conti, Claudio [ISC-CNR and Department of Physics, University Sapienza, P.le Aldo Moro 5, I-00185 Roma (Italy)
2015-06-22
We observe three-dimensional rogue waves in the speckle distribution of a spatially modulated optical beam. Light is transmitted beyond a partially reflecting obstacle generating optical rogue waves at a controlled position in the shadow of the barrier. When the barrier transmits only 0.07% of the input laser power, we observe the mostly localized event. These results demonstrate that an optimum amount of spatial non-homogeneity maximizes the probability of a gigantic event while the technique we exploit enables to control light behind a fully reflective wall.
Three-dimensional edge extraction in optical scanning holography
Zong, Yonghong; Zhou, Changhe; Ma, Jianyong; Jia, Wei; Wang, Jin
2016-10-01
Edge extraction has found applications in various image processing fields, such as in pattern recognition. In this paper, a new method is proposed for edge extraction of three-dimensional objects in optical scanning holography (OSH). Isotropic and anisotropic edge extraction of 3D objects is simulated using spiral phase plates in OSH operating in an incoherent mode. We propose to use a delta function and a spiral phase plate as the pupil functions to realize isotropic and anisotropic edge extraction. Our computer simulations show the capability of extracting the edges of a given 3D object by spiral phase filtering in OSH.
Proton beam writing of three-dimensional microcavities
Energy Technology Data Exchange (ETDEWEB)
Vanga, S.K., E-mail: sudheer@nus.edu.sg [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117542 (Singapore); Bettiol, A.A. [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117542 (Singapore)
2013-07-01
Optical micro cavities exhibit high quality factors due to the circulation of resonant optical fields within the cavity. Polymers are good materials for the fabrication of micro cavities for practical applications due to the availability of various refractive indices and their low cost. Polymer micro cavities generally yield low Q-factors compared to semiconductor materials because of inherent material absorption losses, and their Q-factors are limited by the low index contrast between the polymer and the substrate material. In the present work, three dimensional micro cavities were fabricated in SU-8 using proton beam writing to enhance the index contrast by isolating the cavities from the substrate.
Analysis and visualization of complex unsteady three-dimensional flows
Van Dalsem, William R.; Buning, Pieter G.; Dougherty, F. Carroll; Smith, Merritt H.
1989-01-01
Flow field animation is the natural choice as a tool in the analysis of the numerical simulations of complex unsteady three-dimensional flows. The PLOT4D extension of the widely used PLOT3D code to allow the interactive animation of a broad range of flow variables was developed and is presented. To allow direct comparison with unsteady experimental smoke and dye flow visualization, the code STREAKER was developed to produce time accurate streaklines. Considerations regarding the development of PLOT4D and STREAKER, and example results are presented.
Seismic waves in a three-dimensional block medium
Aleksandrova, N. I.
2016-08-01
We study numerically the propagation of seismic waves in a three-dimensional block medium. The medium is modelled by a spatial lattice of masses connected by elastic springs and viscous dampers. We study Lamb's problem under a surface point vertical load. The cases of both step and pulse load are considered. The displacements and velocities are calculated for surface masses. The influence of the viscosity of the dampers on the attenuation of perturbations is studied. We compare our numerical results for the block medium with known analytical solutions for the elastic medium.
Three-Dimensional Orientation Mapping in the Transmission Electron Microscope
DEFF Research Database (Denmark)
Liu, Haihua; Schmidt, Søren; Poulsen, Henning Friis
2011-01-01
Over the past decade, efforts have been made to develop nondestructive techniques for three-dimensional (3D) grain-orientation mapping in crystalline materials. 3D x-ray diffraction microscopy and differential-aperture x-ray microscopy can now be used to generate 3D orientation maps with a spatial...... resolution of 200 nanometers (nm). We describe here a nondestructive technique that enables 3D orientation mapping in the transmission electron microscope of mono- and multiphase nanocrystalline materials with a spatial resolution reaching 1 nm. We demonstrate the technique by an experimental study...... of a nanocrystalline aluminum sample and use simulations to validate the principles involved...
Three-dimensional multifunctional optical coherence tomography for skin imaging
Li, En; Makita, Shuichi; Hong, Young-Joo; Kasaragod, Deepa; Sasaoka, Tomoko; Yamanari, Masahiro; Sugiyama, Satoshi; Yasuno, Yoshiaki
2016-02-01
Optical coherence tomography (OCT) visualizes cross-sectional microstructures of biological tissues. Recent developments of multifunctional OCT (MF-OCT) provides multiple optical contrasts which can reveal currently unknown tissue properties. In this contribution we demonstrate multifunctional OCT specially designed for dermatological investigation. And by utilizing it to measure four different body parts of in vivo human skin, three-dimensional scattering OCT, OCT angiography, polarization uniformity tomography, and local birefringence tomography images were obtained by a single scan. They respectively contrast the structure and morphology, vasculature, melanin content and collagen traits of the tissue.
High-resolution three-dimensional imaging of dislocations.
Barnard, J S; Sharp, J; Tong, J R; Midgley, P A
2006-07-21
Dislocations and their interactions govern the properties of many materials, ranging from work hardening in metals to device pathology in semiconductor laser diodes. However, conventional electron micrographs are simply two-dimensional projections of three-dimensional (3D) structures, and even stereo microscopy cannot reveal the true 3D complexity of defect structures. Here, we describe an electron tomographic method that yields 3D reconstructions of dislocation networks with a spatial resolution three orders of magnitude better than previous work. We illustrate the method's success with a study of dislocations in a GaN epilayer, where dislocation densities of 1010 per square centimeter are common.
Optimal control of three-dimensional steamflooding processes
Energy Technology Data Exchange (ETDEWEB)
Liu, Wei; Fred Ramirez, W. (Dept. of Chemical Engineering, Univ. of Colorado, Boulder, CO (United States))
1994-06-01
A system science approach using optimal control theory of distributed parameter systems has been developed to determine operating strategies that maximize the economic profitability of the steamflooding processes. Necessary conditions of optimization are established by using the discrete form of calculus of variations and Pontryagin's Maximum Principle. The performance of this approach is investigated through two actual three-dimensional steamflooding projects. The optimization results show this method yields significant improvements over the original operating strategies. These improvements cannot be achieved through traditional design methods
Ordinary polarization singularities in three-dimensional optical fields.
Freund, Isaac
2012-06-15
In generic three-dimensional optical fields the canonical point polarization singularities are points of circular polarization, C points on C lines, and points of linear polarization, L points on L lines. These special points are surrounded by a sea of ordinary points. In planes oriented normal to the principle axes of the polarization ellipse at the point, every ordinary point is also a singularity, here an ordinary polarization singularity, or O point. Interactions between O points, between O points and C points, and between O points and L points are described that highlight the fact that a consistent description of optical fields containing C and L lines must include O points.
Three Dimensional Transformations in the Film Subtitle Translation
Institute of Scientific and Technical Information of China (English)
陈志海
2015-01-01
Film plays an indispensable part in cultural exchange. However, current scholars’studies on the film subtitle transla⁃tion are less than literary translation. There exists no systematic strategy and theory guiding it, and there still exists some problems. This paper introduces eco-translatology to film subtitle translation. Eco-translatology proposes that translation is an alternative cy⁃cle of translators’adaptation and selection activities in translational eco-environment. The translation method focuses on three-dimensional transformation, namely linguistic, cultural and communicative dimensions.
Three dimensional evolution of differentially rotating magnetized neutron stars
Kiuchi, Kenta; Shibata, Masaru
2012-01-01
We construct a new three-dimensional general relativistic magnetohydrodynamics code, in which a fixed mesh refinement technique is implemented. To ensure the divergence-free condition as well as the magnetic flux conservation, we employ the method by Balsara (2001). Using this new code, we evolve differentially rotating magnetized neutron stars, and find that a magnetically driven outflow is launched from the star exhibiting a kink instability. The matter ejection rate and Poynting flux are still consistent with our previous finding (Shibata et al., 2011) obtained in axisymmetric simulations.
Three dimensional monocular SLAM for autonomous drone navigation
Dehem, Boris
2017-01-01
This master's thesis expands on work previously done at the UCL's autonomous drone project to allow three dimensional simultaneous localization and mapping by a low-cost quadcopter. In GPS-denied environments, drones have to rely on their on-board sensors to localize themselves. We decided to use the drone's front camera to build a map of the environment and to localize the drone within that map. We take a keyframe-based approach, building a map from a small set of snapshots of the drone's ca...
Three-dimensional global fluid simulations of cylindrical magnetized plasmas
DEFF Research Database (Denmark)
Naulin, Volker; Windisch, T.; Grulke, O.
2008-01-01
. Thus, it is possible to assess the reproductive and predictive capabilities of plasma simulations in unprecedented detail. Here, three-dimensional global fluid simulations of a cylindrical magnetized plasma are presented. This plasma is characterized by the existence of spatially localized sources...... and sinks. The traditional scale separation paradigm is not applied in the simulation model to account for the important evolution of the background profiles due to the dynamics of turbulent fluctuations. Furthermore, the fluid modeling of sheath boundary conditions, which determine the plasma conditions...
Three-Dimensional Magnetohydrodynamic Simulation of Slapper Initiation Systems
Energy Technology Data Exchange (ETDEWEB)
Christensen, J S; Hrousis, C A
2010-03-09
Although useful information can be gleaned from 2D and even 1D simulations of slapper type initiation systems, these systems are inherently three-dimensional and therefore require full 3D representation to model all relevant details. Further, such representation provides additional insight into optimizing the design of such devices from a first-principles perspective and can thereby reduce experimental costs. We discuss in this paper several ongoing efforts in modeling these systems, our pursuit of validation, and extension of these methods to other systems. Our results show the substantial dependence upon highly accurate global equations of state and resistivity models in these analyses.
Three-dimensional dilatonic gravity's rainbow: Exact solutions
Hossein Hendi, Seyed; Eslam Panah, Behzad; Panahiyan, Shahram
2016-10-01
Deep relations of dark energy scenario and string theory results into dilaton gravity, on the one hand, and the connection between quantum gravity and gravity's rainbow, on the other hand, motivate us to consider three-dimensional dilatonic black hole solutions in gravity's rainbow. We obtain two classes of the solutions, which are polynomial and logarithmic forms. We also calculate conserved and thermodynamic quantities, and examine the first law of thermodynamics for both classes. In addition, we study thermal stability and show that one of the classes is thermally stable while the other one is unstable.
Multiple scattering of light in three-dimensional photonic quasicrystals.
Ledermann, Alexandra; Wiersma, Diederik S; Wegener, Martin; von Freymann, Georg
2009-02-01
Recent experiments on three-dimensional icosahedral dielectric photonic quasicrystals have shown several unexpected features: transmitted femtosecond pulses developed a trailing "diffusive" exponential tail and the sum of (zeroth-order) transmittance and reflectance was well below unity. These experimental findings have previously been ascribed to sample imperfections. Here, we analyze these findings by using 3D periodic approximants of the ideal photonic quasicrystals. We show that the experimental observations can be explained in terms of multiple scattering of light within these structures, i.e., in terms of intrinsic rather than purely extrinsic quasicrystal properties.
Three-dimensional nanojunction device models for photovoltaics
Wangperawong, Artit; Bent, Stacey F.
2011-06-01
A model is developed to describe the behavior of three-dimensionally nanostructured photovoltaic devices, distinguishing between isolated radial pn junctions and interdigitated pn junctions. We examine two specific interdigitated architectures, the point-contact nanojunction and the extended nanojunction, which are most relevant to experimental devices reported to date but have yet to be distinguished in the field. The model is also applied to polycrystalline CdTe devices with inverted grain boundaries. We demonstrate that for CdTe/CdS solar cells using low-quality materials, the efficiency of the extended nanojunction geometry is superior to other designs considered.
The application of three-dimensional photoelasticity to impact problems
Energy Technology Data Exchange (ETDEWEB)
Kostin, I.C. [Moscow State Univ. of Civil Engeneering (Russian Federation); Fedorov, A.V. [Mining School of Nantes (France)
1995-12-31
A method is proposed for the solution of three-dimensional dynamic problems in geometrically complex structural configurations under impact. The methodology developed employs the generation of photoelastically observable stress wave propagation in a birefringent material applied to the external surfaces of a structure. This work demonstrated the extension of this technique to impact loading. Problems of practical engineering application, such as the gluing of birefringent material to test models were examined experimentally. Pulsed magnetic fields generated by capacitor discharge were employed on typical complex engineering models to demonstrate that the methodology is adequate for solving practical impact problems.
On three-dimensional trace anomaly from holographic local RG
Kikuchi, Ken; Hosoda, Hiroto; Suzuki, Akihiro
2017-01-01
Odd-dimensional quantum field theories (QFTs) can have nonzero trace anomalies if external fields are introduced and some ingredients needed to make Lorentz scalars with appropriate mass dimensions (or weights) are supplied. We have studied a three-dimensional QFT and explicitly computed the trace of the stress tensor using the holographic local renormalization group (RG). We have checked some properties of vector beta functions and the Wess-Zumino consistency condition; however, we have found that the anomalies vanish on fixed points. We clarify what is responsible for the vanishing trace anomalies.
Three-Dimensional Bone Adaptation of the Proximal Femur
DEFF Research Database (Denmark)
Bagge, Mette
1998-01-01
The bone remodeling of a three-dimensional model of the proximal femur is considered. The bone adaptation is numerically described as an evolution in time formulated such that the structural change goes in an optimal direction within each time step for the optimal boundary conditions. In the bone...... remodeling scheme is included the memory of past loadings to account for the delay in the bone response to the load changes. In order to get a realistic bone adaptation process, the bone structure at the onset of the remodeling needs to be realistic too. A start design is obtained by structural optimization...
Black holes in three-dimensional dilaton gravity theories
Sá, P M; Lemos, J P S; Sa, Paulo M; Kleber, Antares; Lemos, Jose P S
1995-01-01
Three dimensional black holes in a generalized dilaton gravity action theory are analysed. The theory is specified by two fields, the dilaton and the graviton, and two parameters, the cosmological constant and the Brans-Dicke parameter. It contains seven different cases, of which one distinguishes as special cases, string theory, general relativity and a theory equivalent to four dimensional general relativity with one Killing vector. We study the causal structure and geodesic motion of null and timelike particles in the black hole geometries and find the ADM masses of the different solutions.
Three Dimensional Digital Image Processing using Edge Detectors
Directory of Open Access Journals (Sweden)
John Schmeelk
2005-11-01
Full Text Available This paper provides an introduction to three dimensional image edge detection and its relationship to partial derivatives, convolutions and wavelets. We are especially addressing the notion of edge detection because it has far reaching applications in all areas of research to include medical research. A patient can be diagnosed as having an aneurysm by studying an angiogram. An angiogram is the visual view of the blood vessels whereby the edges are highlighted through the implementation of edge detectors. This process is completed through convolution, wavelets and matrix techniques. Some illustrations included will be vertical, horizontal, Sobel and wavelet edge detectors.
AN EXAMPLE OF THREE-DIMENSIONAL PROGRESSIVE SLOPE FAILURE
Institute of Scientific and Technical Information of China (English)
王家臣; 骆中洲
1995-01-01
In fact, the failure of any slope takes place progressively, but the progressive failure mechanism has not been emphasized sufficently in the present stability analysis of slopes. This paper provides an example of the progressive slope failure which took place at Pingzhuang west surface coal mine and was numbered the 26th slide. The three-dimensional reliability model for progressive slope failure is used to study the failure process of the 26th slide. The outcomes indicate that the progressive failure is indeed the failure mechanism of the slide.
Directory of Open Access Journals (Sweden)
Weisman JA
2015-01-01
Full Text Available Jeffery A Weisman,1 James C Nicholson,2 Karthik Tappa,1 UdayaBhanu Jammalamadaka,1 Chester G Wilson,2 David K Mills1,3 1Center for Biomedical Engineering and Rehabilitation Science, 2Nanosystems Engineering, 3School of Biological Sciences, Louisiana Technical University, Ruston, LA, USAAbstract: Three-dimensional (3D printing and additive manufacturing holds potential for highly personalized medicine, and its introduction into clinical medicine will have many implications for patient care. This paper demonstrates the first application of 3D printing as a method for the potential sustained delivery of antibiotic and chemotherapeutic drugs from constructs for patient treatment. Our design is focused on the on-demand production of anti-infective and chemotherapeutic filaments that can be used to create discs, beads, catheters, or any medical construct using a 3D printing system. The design parameters for this project were to create a system that could be modularly loaded with bioactive agents. All 3D-printed constructs were loaded with either gentamicin or methotrexate and were optimized for efficient and extended antibacterial and cancer growth-inhibiting cytostatic activity. Preliminary results demonstrate that combining gentamicin and methotrexate with polylactic acid forms a composite possessing a superior combination of strength, versatility, and enhanced drug delivery. Antibacterial effects and a reduction in proliferation of osteosarcoma cells were observed with all constructs, attesting to the technical and clinical viability of our composites. In this study, 3D constructs were loaded with gentamicin and methotrexate, but the method can be extended to many other drugs. This method could permit clinicians to provide customized and tailored treatment that allows patient-specific treatment of disease and has significant potential for use as a tunable drug delivery system with sustained-release capacity for an array of biomedical applications
Gualdi, Giulia; Illuminati, Fabrizio
2010-01-01
We introduce and discuss the concept of modular entanglement. This is the entanglement that is established between the end points of modular systems composed by sets of interacting blocks of arbitrarily fixed size. We show that end-to-end modular entanglement scales in the thermodynamic limit and rapidly saturates with the number of constituent blocks. We clarify the mechanisms underlying the onset of entanglement between distant and non-interacting quantum systems and its optimization for applications to quantum repeaters and entanglement distribution and sharing.
Gualdi, Giulia; Giampaolo, Salvatore M; Illuminati, Fabrizio
2011-02-04
We introduce and discuss the concept of modular entanglement. This is the entanglement that is established between the end points of modular systems composed by sets of interacting moduli of arbitrarily fixed size. We show that end-to-end modular entanglement scales in the thermodynamic limit and rapidly saturates with the number of constituent moduli. We clarify the mechanisms underlying the onset of entanglement between distant and noninteracting quantum systems and its optimization for applications to quantum repeaters and entanglement distribution and sharing.
Frozen Gaussian approximation for three-dimensional seismic wave propagation
Chai, Lihui; Tong, Ping; Yang, Xu
2016-09-01
We present a systematic introduction on applying frozen Gaussian approximation (FGA) to compute synthetic seismograms in three-dimensional earth models. In this method, seismic wavefield is decomposed into frozen (fixed-width) Gaussian functions, which propagate along ray paths. Rather than the coherent state solution to the wave equation, this method is rigorously derived by asymptotic expansion on phase plane, with analysis of its accuracy determined by the ratio of short wavelength over large domain size. Similar to other ray-based beam methods (e.g. Gaussian beam methods), one can use relatively small number of Gaussians to get accurate approximations of high-frequency wavefield. The algorithm is embarrassingly parallel, which can drastically speed up the computation with a multicore-processor computer station. We illustrate the accuracy and efficiency of the method by comparing it to the spectral element method for a three-dimensional (3D) seismic wave propagation in homogeneous media, where one has the analytical solution as a benchmark. As another proof of methodology, simulations of high-frequency seismic wave propagation in heterogeneous media are performed for 3D waveguide model and smoothed Marmousi model respectively. The second contribution of this paper is that, we incorporate the Snell's law into the FGA formulation, and asymptotically derive reflection, transmission and free surface conditions for FGA to compute high-frequency seismic wave propagation in high contrast media. We numerically test these conditions by computing traveltime kernels of different phases in the 3D crust-over-mantle model.
Three-dimensional bioprinting in tissue engineering and regenerative medicine.
Gao, Guifang; Cui, Xiaofeng
2016-02-01
With the advances of stem cell research, development of intelligent biomaterials and three-dimensional biofabrication strategies, highly mimicked tissue or organs can be engineered. Among all the biofabrication approaches, bioprinting based on inkjet printing technology has the promises to deliver and create biomimicked tissue with high throughput, digital control, and the capacity of single cell manipulation. Therefore, this enabling technology has great potential in regenerative medicine and translational applications. The most current advances in organ and tissue bioprinting based on the thermal inkjet printing technology are described in this review, including vasculature, muscle, cartilage, and bone. In addition, the benign side effect of bioprinting to the printed mammalian cells can be utilized for gene or drug delivery, which can be achieved conveniently during precise cell placement for tissue construction. With layer-by-layer assembly, three-dimensional tissues with complex structures can be printed using converted medical images. Therefore, bioprinting based on thermal inkjet is so far the most optimal solution to engineer vascular system to the thick and complex tissues. Collectively, bioprinting has great potential and broad applications in tissue engineering and regenerative medicine. The future advances of bioprinting include the integration of different printing mechanisms to engineer biphasic or triphasic tissues with optimized scaffolds and further understanding of stem cell biology.
Vocal Fold Pathologies and Three-Dimensional Flow Separation Phenomena
Apostoli, Adam G.; Weiland, Kelley S.; Plesniak, Michael W.
2013-11-01
Polyps and nodules are two different pathologies, which are geometric abnormalities that form on the medial surface of the vocal folds, and have been shown to significantly disrupt a person's ability to communicate. Although the mechanism by which the vocal folds self-oscillate and the three-dimensional nature of the glottal jet has been studied, the effect of irregularities caused by pathologies is not fully understood. Examining the formation and evolution of vortical structures created by a geometric protuberance is important, not only for understanding the aerodynamic forces exerted by these structures on the vocal folds, but also in the treatment of the above-mentioned pathological conditions. Using a wall-mounted prolate hemispheroid with a 2:1 aspect ratio in cross flow, the present investigation considers three-dimensional flow separation induced by a model vocal fold polyp. Building on previous work using skin friction line visualization, both the velocity flow field and wall pressure measurements around the model polyp are presented and compared. Supported by the National Science Foundation, Grant No. CBET-1236351 and GW Center for Biomimetics and Bioinspired Engineering (COBRE).
Three-dimensional saltating processes of multiple sediment particles
Institute of Scientific and Technical Information of China (English)
Hsiao-Wen WANG; Hong-Yuan LEE; Po-Ning LEE
2009-01-01
The purpose of this study was to investigate the interacting mechanism between the saltating particles near a channel bed.A three-dimensional real-time flow visualization technique was developed to measure the interparticle collision behaviors during the saltating process.Based on the experimental data,the distribution of the collision points was found to be symmetric.This confirms the assumption that the projections of the collision points onto the reasonable plane are uniformly distributed.A three-dimensional saltating model was also developed.This model produced satisfactory results.The model is able to simulate the continuous saltating trajectories of several particles.The simulated dimensionless saltating height,longitudinal and vertical saltation velocity components were found to increase as the dimensionless particle diameter and the dimensionless flow transport capacity parameter increase,while the simulated lateral saltation velocity component varies inversely with the dimensionless flow transport capacity parameter.A regression equation for the bed load transport rate was also obtained.
Three-dimensional Majorana fermions in chiral superconductors.
Kozii, Vladyslav; Venderbos, Jörn W F; Fu, Liang
2016-12-01
Using a systematic symmetry and topology analysis, we establish that three-dimensional chiral superconductors with strong spin-orbit coupling and odd-parity pairing generically host low-energy nodal quasiparticles that are spin-nondegenerate and realize Majorana fermions in three dimensions. By examining all types of chiral Cooper pairs with total angular momentum J formed by Bloch electrons with angular momentum j in crystals, we obtain a comprehensive classification of gapless Majorana quasiparticles in terms of energy-momentum relation and location on the Fermi surface. We show that the existence of bulk Majorana fermions in the vicinity of spin-selective point nodes is rooted in the nonunitary nature of chiral pairing in spin-orbit-coupled superconductors. We address experimental signatures of Majorana fermions and find that the nuclear magnetic resonance spin relaxation rate is significantly suppressed for nuclear spins polarized along the nodal direction as a consequence of the spin-selective Majorana nature of nodal quasiparticles. Furthermore, Majorana nodes in the bulk have nontrivial topology and imply the presence of Majorana bound states on the surface, which form arcs in momentum space. We conclude by proposing the heavy fermion superconductor PrOs4Sb12 and related materials as promising candidates for nonunitary chiral superconductors hosting three-dimensional Majorana fermions.
Three-dimensional Echocardiography in Valvular Heart Disease.
Kurklinsky, Andrew; Mankad, Sunil
2012-01-01
Recent technologic advances in 3-dimensional (3D) echocardiography, using parallel processing to scan a pyramidal volume, have allowed for a superior ability to describe valvular anatomy using both transthoracic and transesophageal echocardiography. Although still in evolution and at an early phase of adaptation with respect to its clinical application, 3D echocardiography has emerged as an important clinical tool in the assessment of valvular heart disease. Three-dimensional echocardiography provides unique perspectives of valvular structures by presenting "en face" views of valvular structures, allowing for a better understanding of the topographical aspects of pathology, and a refined definition of the spatial relationships of intracardiac structures. Three-dimensional echocardiography makes available indices not described by 2D echocardiography and has been demonstrated to be superior to 2D echocardiography in a variety of valvular disease scenarios. The information gained from 3D echocardiography has especially made an impact in guiding clinical decisions in the evaluation of mitral valve (MV) disease. The decision of early surgery in degenerative MV disease is based on the suitability of repair, and the suitability of repair is generally based on echocardiography. The superior understanding of MV anatomy afforded by 3D echocardiography has been shown to be quite valuable in this setting. This review will describe the contemporary use of 3D echocardiography in the assessment of valvular heart disease, including MV, aortic, tricuspid, and prosthetic valve abnormalities. This article illustrates how 3D echocardiography can complement current echocardiography techniques in the management of valvular heart disease.
Three-dimensional vision sensors for autonomous robots
Uchiyama, Takashi; Okabayashi, Keizyu; Wakitani, Jun
1993-09-01
A three dimensional measurement system, which is important for developing autonomous robots is described. Industrial robots used in today's plants are of the preprogrammed teaching playback type. It is necessary to develop autonomous robots which can work based on sensor information for intelligent manufacturing systems. Moreover, practical use of robots which work in unstructured environments such as outdoors and in space is expected. To realize this, a function to measure objects and the environment three-dimensionally is a key technology. Additional important requirements for robotic sensors are real-time processing and compactness. We have developed smart 3-D vision sensors for the purpose of realizing autonomous robots. These are two kinds of sensors with different functions corresponding to the application. One is a slitted light range finder ( SLRF ) to measure stationary objects. The other is a real-time tracking vision ( RTTV ) which can measure moving objects at high speed. SLRF uses multiple slitted lights which are generated by a semiconductor laser through an interference filter and a cylindrical lens. Furthermore, we developed a liquid crystal shutter with multiple electrodes. We devised a technique to make coded slitted light by putting this shutter in front of the light source. As a result, using the principle of triangulation, objects can be measured in three dimensions. In addition, high-speed image input was enabled by projecting multiple slitted light at the same time. We have confirmed the effectiveness of the SLRF applied to a hand-eye system using a robot.
Three-Dimensional Dynamical Instabilities in Galactic Ionization Fronts
Whalen, Daniel J.; Norman, Michael L.
2008-01-01
Ionization front instabilities have long been of interest for their suspected role in a variety of phenomena in the Galaxy, from the formation of bright rims and "elephant trunks" in nebulae to triggered star formation in molecular clouds. Numerical treatments of these instabilities have historically been limited in both dimensionality and input physics, leaving important questions about their true evolution unanswered. We present the first three-dimensional radiation hydrodynamical calculations of both R-type (rarefied) and D-type (dense) ionization front instabilities in Galactic environments (i.e., solar-metallicity gas). Consistent with linear stability analyses of planar D-type fronts, our models exhibit many short-wavelength perturbations that grow at early times and later evolve into fewer large-wavelength structures. The simulations demonstrate that both self-consistent radiative transfer and three-dimensional flow introduce significant morphological differences to unstable modes when compared to earlier two-dimensional approximate models. We find that the amplitude of the instabilities in the nonlinear regime is primarily determined by the efficiency of cooling within the shocked neutral shell. Strong radiative cooling leads to long, extended structures with pronounced clumping, while weaker cooling leads to saturated modes that devolve into turbulent flows. These results suggest that expanding H II regions may either promote or provide turbulent support against the formation of later generations of stars, with potential consequences for star formation rates in the Galaxy today.
Three dimensional visualisation of human facial exposure to solar ultraviolet.
Downs, Nathan; Parisi, Alfio
2007-01-01
A three dimensional computer model of the human face has been developed to represent solar ultraviolet exposures recorded by dosimeter measurements on a manikin headform under low cloud conditions and various solar zenith angles. Additionally, polysulfone dosimeters have been successfully miniaturised to provide the detailed measurements required across the face. The headform used in this research was scanned at 709 individual locations to make a wireframe mesh consisting of 18 vertical contours and 49 horizontal contours covering half the manikin's frontal facial topography. Additionally, the back of the headform and neck have also been scanned at 576 locations. Each scanned location has been used as a viable dosimeter position on the headform and represents a grid intersection point on the developed computer wireframe. A series of exposures recorded by dosimeters have been translated into three dimensional exposure ratio maps, representing ambient solar ultraviolet exposure. High dosimeter density has allowed for the development of individual topographic contour models which take into account complex variation in the face and improve upon previously employed techniques which utilise fewer dosimeters to interpolate exposure across facial contours. Exposure ratios for solar zenith angle ranges of 0 degrees -30 degrees, 30 degrees -50 degrees, and 50 degrees -80 degrees have been developed.
Nanoscale three-dimensional imaging of the human myocyte.
Sulkin, Matthew S; Yang, Fei; Holzem, Katherine M; Van Leer, Brandon; Bugge, Cliff; Laughner, Jacob I; Green, Karen; Efimov, Igor R
2014-10-01
The ventricular human myocyte is spatially organized for optimal ATP and Ca(2+) delivery to sarcomeric myosin and ionic pumps during every excitation-contraction cycle. Comprehension of three-dimensional geometry of the tightly packed ultrastructure has been derived from discontinuous two-dimensional images, but has never been precisely reconstructed or analyzed in human myocardium. Using a focused ion beam scanning electron microscope, we created nanoscale resolution serial images to quantify the three-dimensional ultrastructure of a human left ventricular myocyte. Transverse tubules (t-tubule), lipid droplets, A-bands, and mitochondria occupy 1.8, 1.9, 10.8, and 27.9% of the myocyte volume, respectively. The complex t-tubule system has a small tortuosity (1.04±0.01), and is composed of long transverse segments with diameters of 317±24nm and short branches. Our data indicates that lipid droplets located well beneath the sarcolemma are proximal to t-tubules, where 59% (13 of 22) of lipid droplet centroids are within 0.50μm of a t-tubule. This spatial association could have an important implication in the development and treatment of heart failure because it connects two independently known pathophysiological alterations, a substrate switch from fatty acids to glucose and t-tubular derangement.
Three-dimensional percolation modeling of self-healing composites.
Dementsov, Alexander; Privman, Vladimir
2008-08-01
We study the self-healing process of materials with embedded "glue"-carrying cells, in the regime of the onset of the initial fatigue. Three-dimensional numerical simulations within the percolation-model approach are reported. The main numerical challenge taken up in the present work has been to extend the calculation of the conductance to three-dimensional lattices. Our results confirm the general features of the process: The onset of material fatigue is delayed, by development of a plateaulike time dependence of the material quality. We demonstrate that, in this low-damage regime, the changes in the conductance and thus in similar transport and response properties of the material can be used as measures of the material quality degradation. A new feature found for three dimensions, where it is much more profound than in earlier-studied two-dimensional systems, is the competition between the healing cells. Even for low initial densities of the healing cells, they interfere with each other and reduce each other's effective healing efficiency.
Three-dimensional shock wave diffraction off a discontinuous edge
Cooppan, S.; Skews, B.
2017-03-01
The interaction of three-dimensional vortex flows was investigated through vortex shedding off a discontinuous edge. Two wedges of 14.5° wedge angle (up and downstream edges) were separated by an offset. The size of the offset (5, 10, and 20 mm) and the Mach number (Mach 1.32, 1.42, and 1.6) were the key parameters investigated. Experimental images were taken and computational simulations were run; a close relation was found between the two. This enabled the three-dimensional effects of the flow to be studied and analysed. It was found, as the offset increased in size, the vortices shed off the up and downstream edges took a longer time to merge and the strength of the interaction was weaker. The vortex topology changed with a larger offset; the downstream vortex was thinner (in terms of cross-sectional diameter) adjacent to the offset, which is an indication of a change in density, than the rest of the vortex along the downstream diffraction edge. This particular feature was more prevalent at lower Mach numbers. The effect of a higher Mach number was to increase the rate of dissipation of the vortices, lengthen the shear layer due to the higher upstream velocity, and make the vortex profile elliptical.
Direct-writing organic three-dimensional nanofibrous structure
Wang, Han; Zheng, Gaofeng; Li, Wenwang; Wang, Xiang; Sun, Daoheng
2011-02-01
Direct-writing technology based on Near-Field Electrospinning (NFES) was used to fabricate an organic three-dimensional nanofibrous circle on the patterned silicon substrate. In NFES, straight jet without splitting and chaotic motion was utilized to direct-write orderly nanofiber. When the collector movement speed was lower than electrospinning rate, the relaxed nanofiber would be lead into the pendulum motion by the electrical field force and Coulomb repulsion force from the residual charges on the collector. When the relative air humidity is lower than 35%, individual nanofiber with larger elastic resistance would reveal a good self-assembly performance. Owing to the guidance of the electric field force at the edge of the micro-pattern, a nanofiber was deposited layer by layer to format a 3D nanofibrous circle on the top surface of the micro-pattern. The dimension scale of 3D nanofibrous circle was smaller than 30 µm. With the help of a microscope, a 3D nanofibrous circle can be deposited precisely on the strip micro-pattern with width of 4 µm. Furthermore, a 3D nanofibrous circle in different shapes can be obtained by using special micro-patterns. This organic three-dimensional nanofibrous circle has created a new aspect for the fabrication of organic micro/nanosystems.
Three-Dimensional Turbulent Reconnection Induced by the Plasmoid Instability
Bhattacharjee, A.; Huang, Y. M.
2014-12-01
It has been established that the Sweet-Parker current layer in high-Lundquist-number reconnection is unstable to the super-Alfvenic plasmoid instability. Past two-dimensional magnetohydrodynamic simulations have demonstrated that the plasmoid instability leads to a new regime in which the Sweet-Parker current layer evolves into a chain of plasmoids connected by secondary current sheets and the averaged reconnection rate becomes nearly independent of the Lundquist number. In a three-dimensional configuration with a guide field, the additional degree of freedom allows plasmoid instabilities to grow at oblique angles [S. Baalrud et al. Phys. Plasmas 19, 022101 (2012)] and develop the complex dynamics of flux ropes which overlap, cause field-line stochasticization, and self-generate a turbulent state. Three-dimensional simulations in the high-Lundquist-number regime show the formation of cigar-shaped eddies elongated in the direction of the local magnetic field, which is a signature of anisotropic MHD turbulence. Furthermore, the energy fluctuation spectra are found to satisfy power laws in the inertial range. The averaged 3D reconnection rate in the self-generated turbulent state is of the order of a hundredth of the characteristic Alfven speed, which is an order of magnitude lower than the reconnection rate reported in recent studies of externally driven 3D turbulent reconnection. The physical reasons for these differences will be discussed.
Tailoring thermal conductivity via three-dimensional porous alumina
Abad, Begoña; Maiz, Jon; Ruiz-Clavijo, Alejandra; Caballero-Calero, Olga; Martin-Gonzalez, Marisol
2016-12-01
Three-dimensional anodic alumina templates (3D-AAO) are an astonishing framework with open highly ordered three-dimensional skeleton structures. Since these templates are architecturally different from conventional solids or porous templates, they teem with opportunities for engineering thermal properties. By establishing the mechanisms of heat transfer in these frameworks, we aim to create materials with tailored thermal properties. The effective thermal conductivity of an empty 3D-AAO membrane was measured. As the effective medium theory was not valid to extract the skeletal thermal conductivity of 3D-AAO, a simple 3D thermal conduction model was developed, based on a mixed series and parallel thermal resistor circuit, giving a skeletal thermal conductivity value of approximately 1.25 W·m-1·K-1, which matches the value of the ordinary AAO membranes prepared from the same acid solution. The effect of different filler materials as well as the variation of the number of transversal nanochannels and the length of the 3D-AAO membrane in the effective thermal conductivity of the composite was studied. Finally, the thermal conductivity of two 3D-AAO membranes filled with cobalt and bismuth telluride was also measured, which was in good agreement with the thermal model predictions. Therefore, this work proved this structure as a powerful approach to tailor thermal properties.
Three-dimensional finite element analysis of platform switched implant
2017-01-01
PURPOSE The purpose of this study was to analyze the influence of the platform switching concept on an implant system and peri-implant bone using three-dimensional finite element analysis. MATERIALS AND METHODS Two three-dimensional finite element models for wide platform and platform switching were created. In the wide platform model, a wide platform abutment was connected to a wide platform implant. In the platform switching model, the wide platform abutment of the wide platform model was replaced by a regular platform abutment. A contact condition was set between the implant components. A vertical load of 300 N was applied to the crown. The maximum von Mises stress values and displacements of the two models were compared to analyze the biomechanical behavior of the models. RESULTS In the two models, the stress was mainly concentrated at the bottom of the abutment and the top surface of the implant in both models. However, the von Mises stress values were much higher in the platform switching model in most of the components, except for the bone. The highest von Mises values and stress distribution pattern of the bone were similar in the two models. The components of the platform switching model showed greater displacement than those of the wide platform model. CONCLUSION Due to the stress concentration generated in the implant and the prosthodontic components of the platform switched implant, the mechanical complications might occur when platform switching concept is used. PMID:28243389
Automated photogrammetry for three-dimensional models of urban spaces
Leberl, Franz; Meixner, Philipp; Wendel, Andreas; Irschara, Arnold
2012-02-01
The location-aware Internet is inspiring intensive work addressing the automated assembly of three-dimensional models of urban spaces with their buildings, circulation spaces, vegetation, signs, even their above-ground and underground utility lines. Two-dimensional geographic information systems (GISs) and municipal utility information exist and can serve to guide the creation of models being built with aerial, sometimes satellite imagery, streetside images, indoor imaging, and alternatively with light detection and ranging systems (LiDARs) carried on airplanes, cars, or mounted on tripods. We review the results of current research to automate the information extraction from sensor data. We show that aerial photography at ground sampling distances (GSD) of 1 to 10 cm is well suited to provide geometry data about building facades and roofs, that streetside imagery at 0.5 to 2 cm is particularly interesting when it is collected within community photo collections (CPCs) by the general public, and that the transition to digital imaging has opened the no-cost option of highly overlapping images in support of a more complete and thus more economical automation. LiDAR-systems are a widely used source of three-dimensional data, but they deliver information not really superior to digital photography.
A Three-Dimensional Map of Milky-Way Dust
Green, Gregory M; Finkbeiner, Douglas P; Rix, Hans-Walter; Martin, Nicolas; Burgett, William; Draper, Peter W; Flewelling, Heather; Hodapp, Klaus; Kaiser, Nicholas; Kudritzki, Rolf Peter; Magnier, Eugene; Metcalfe, Nigel; Price, Paul; Tonry, John; Wainscoat, Richard
2015-01-01
We present a three-dimensional map of interstellar dust reddening, covering three-quarters of the sky out to a distance of several kiloparsecs, based on Pan-STARRS 1 and 2MASS photometry. The map reveals a wealth of detailed structure, from filaments to large cloud complexes. The map has a hybrid angular resolution, with most of the map at an angular resolution of 3.4' to 13.7', and a maximum distance resolution of ~25%. The three-dimensional distribution of dust is determined in a fully probabilistic framework, yielding the uncertainty in the reddening distribution along each line of sight, as well as stellar distances, reddenings and classifications for 800 million stars detected by Pan-STARRS 1. We demonstrate the consistency of our reddening estimates with those of two-dimensional emission-based maps of dust reddening. In particular, we find agreement with the Planck 353 GHz optical depth-based reddening map to within 0.05 mag in E(B-V) to a depth of 0.5 mag, and explore systematics at reddenings less tha...
Three-dimensional protonic conductivity in porous organic cage solids
Liu, Ming; Chen, Linjiang; Lewis, Scott; Chong, Samantha Y.; Little, Marc A.; Hasell, Tom; Aldous, Iain M.; Brown, Craig M.; Smith, Martin W.; Morrison, Carole A.; Hardwick, Laurence J.; Cooper, Andrew I.
2016-09-01
Proton conduction is a fundamental process in biology and in devices such as proton exchange membrane fuel cells. To maximize proton conduction, three-dimensional conduction pathways are preferred over one-dimensional pathways, which prevent conduction in two dimensions. Many crystalline porous solids to date show one-dimensional proton conduction. Here we report porous molecular cages with proton conductivities (up to 10-3 S cm-1 at high relative humidity) that compete with extended metal-organic frameworks. The structure of the organic cage imposes a conduction pathway that is necessarily three-dimensional. The cage molecules also promote proton transfer by confining the water molecules while being sufficiently flexible to allow hydrogen bond reorganization. The proton conduction is explained at the molecular level through a combination of proton conductivity measurements, crystallography, molecular simulations and quasi-elastic neutron scattering. These results provide a starting point for high-temperature, anhydrous proton conductors through inclusion of guests other than water in the cage pores.
Three-dimensional recurring patterns in excitable media
Energy Technology Data Exchange (ETDEWEB)
Biton, Y. [Physics Department, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel); Rabinovitch, A., E-mail: avinoam@bgu.ac.il [Physics Department, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel); Braunstein, D. [Physics Department, Sami Shamoon College of Engineering, Beer-Sheva (Israel); Friedman, M. [Department of Information Systems Engineering, Ben-Gurion University, Beer-Sheva 84105 (Israel); Aviram, I. [Physics Department, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel)
2011-06-13
A new method to create three-dimensional periodic patterns in excitable media is presented. The method is demonstrated and the patterns are obtained with the help of two types of 3D 'spiral pairs' generators, which are respectively based on a 'corner effect' and a 'unidirectional propagation' processes. The results portray time-repeating patterns resembling fruits or potteries. The method is easy to implement and can be used to form other types of 3D patterns in excitable media. The question of periodicity of the patterns thus obtained is resolved by calculating the singular lines (filaments) around which they evolve and showing their unique reattachment property. Actual realizations could be conceived e.g. in chemical reactions such as Belousov-Zhabotinsky. Possible severe cardiac arrhythmias following the appearance of such patterns in the action potential of the heart are considered. -- Highlights: → New method to create three-dimensional periodic patterns in excitable media. → Singular lines (filaments) for the corner effect are presented. → Filaments are shown to exhibit periodic behavior.
Three-dimensional solidification and melting using magnetic field control
Dulikravich, George S.; Ahuja, Vineet
1993-01-01
A new two-fluid mathematical model for fully three dimensional steady solidification under the influence of an arbitrary acceleration vector and with or without an arbitrary externally applied steady magnetic field have been formulated and integrated numerically. The model includes Joule heating and allows for separate temperature dependent physical properties within the melt and the solid. Latent heat of phase change during melting/solidification was incorporated using an enthalpy method. Mushy region was automatically captured by varying viscosity orders of magnitude between liquidus and solidus temperature. Computational results were obtained for silicon melt solidification in a parallelepiped container cooled from above and from a side. The results confirm that the magnetic field has a profound influence on the solidifying melt flow field thus changing convective heat transfer through the boundaries and the amount and shape of the solid accrued. This suggests that development of a quick-response algorithm for active control of three dimensional solidification is feasible since it would require low strength magnetic fields.
Tailoring thermal conductivity via three-dimensional porous alumina.
Abad, Begoña; Maiz, Jon; Ruiz-Clavijo, Alejandra; Caballero-Calero, Olga; Martin-Gonzalez, Marisol
2016-12-09
Three-dimensional anodic alumina templates (3D-AAO) are an astonishing framework with open highly ordered three-dimensional skeleton structures. Since these templates are architecturally different from conventional solids or porous templates, they teem with opportunities for engineering thermal properties. By establishing the mechanisms of heat transfer in these frameworks, we aim to create materials with tailored thermal properties. The effective thermal conductivity of an empty 3D-AAO membrane was measured. As the effective medium theory was not valid to extract the skeletal thermal conductivity of 3D-AAO, a simple 3D thermal conduction model was developed, based on a mixed series and parallel thermal resistor circuit, giving a skeletal thermal conductivity value of approximately 1.25 W·m(-1)·K(-1), which matches the value of the ordinary AAO membranes prepared from the same acid solution. The effect of different filler materials as well as the variation of the number of transversal nanochannels and the length of the 3D-AAO membrane in the effective thermal conductivity of the composite was studied. Finally, the thermal conductivity of two 3D-AAO membranes filled with cobalt and bismuth telluride was also measured, which was in good agreement with the thermal model predictions. Therefore, this work proved this structure as a powerful approach to tailor thermal properties.
Three-Dimensional Concentration Measurements around Actively Tracking Blue Crabs
Dickman, B. D.; Jackson, J. L.; Weissburg, M. J.; Webster, D. R.
2006-11-01
Many aquatic arthropods locate food, suitable habitats, and mates solely through information extracted by chemical signals in their environment. Chemical plumes detected by larger animals are influenced by turbulence that creates an intermittent and unpredictable chemical stimulus environment. To link the stimulus pattern to behavior, we have developed a measurement system to quantify the instantaneous odor concentration surrounding a freely tracking blue crab through three-dimensional laser-induced fluorescence (3DLIF). A blue crab receives chemical stimulus at several locations, including the antennules near the mouth region and the distal tips of the legs and claws. Hence, three-dimensional measurements of the concentration field are required to link behavior to plume structure. During trials, crabs began their search 150 cm downstream of a source, and walking kinematics were recording simultaneously. The crabs were reversibly ``blindfolded'' during tracking to prevent aversive reactions to the intense laser light. Our experiments allow us to examine how hypothesized navigational cues, such as concentration bursts at the antennules and spatial asymmetry in concentration at the distributed chemosensory organs on the legs and claws, results in particular decisions during navigation.
A biorthogonality relationship for three-dimensional couple stress problem
Institute of Scientific and Technical Information of China (English)
LUO JianHui; LI QiuSheng; LIU GuangDong
2009-01-01
The duality solution for elasticity and the biorthogonality relationship have been well researched. Now the couple stress theory becomes a new research spot but there is few research for the biorthogonality relationship for couple stress theory comparing to classical elasticity. A new state vector is presented for three dimensional couple stress problems of prismatic structures. A new biorthogonality relation-ship of couple stress is discovered. The dual partial differential equations of couple stress problem are derived by the new state vector. By two important identical equations the new biorthogonality rela-tionship is proved based on the method of separation of variables. The symplectic orthogonality rela-tionship to three dimensional couple stress theory may be decomposed into two independently and symmetrically orthogonality relationships. The new biorthogonality relationship includes the symplectic orthogonality relationship. The biorthogonality relationship of couple stress may also be degenerated into the theory of elasticity. The new state vector and biorthogonality relationship provide theoretic foundation for the research on the schemes of separation of variables and eigenfunction expansion of couple stress theory.
Three-dimensional angular domain optical projection tomography
Ng, Eldon; Vasefi, Fartash; Roumeliotis, Michael; Kaminska, Bozena; Carson, Jeffrey J. L.
2011-03-01
Angular Domain Imaging (ADI) has been previously demonstrated to generate projection images of attenuating targets embedded within a turbid medium. The imaging system employs a silicon micro-tunnel array positioned between the sample and the detection system to reject scattered photons that have deviated from the initial propagation direction and to select for ballistic and quasi-ballistic photons that have retained their forward trajectory. Two dimensional tomographic images can be reconstructed from ADI projections collected at a multitude of angles. The objective of this work was to extend the system to three dimensions by collecting several tomographic images and stacking the reconstructed slices to generate a three dimensional volume representative of the imaging target. A diode laser (808nm, CW) with a beam expander was used to illuminate the sample cuvette. An Angular Filter Array (AFA) of 80 μm × 80 μm square-shaped tunnels 2 cm in length was used to select for image forming quasi-ballistic photons. Images were detected with a linear CCD. Our approach was to use a SCARA robot to rotate and translate the sample to collect sufficient projections to reconstruct a three dimensional volume. A custom designed 3D target consisting of 4 truncated cones was imaged and reconstructed with filtered backprojection and iterative methods. A 0.5 mm graphite rod was used to collect the forward model, while a truncated pseudoinverse was used to approximate the backward model for the iterative algorithm.
Transect-based Three-Dimensional Road Modeling and Visualization
Institute of Scientific and Technical Information of China (English)
LI Qingquan; TANG Luliang; ZUO Xiaoqing; LI Hanwu
2004-01-01
On the basis of the study on road elements and the existing three-dimensional road data models, this paper puts forward the transect-based road modeling, resolves the modeling of the simplest road with two road transects, and fulfils the visualization of the road. OpenGL is applied as the tool of visualization. The map texture technology, LOD algorithm and dynamic multi-differentiating texture technology are of benefit to the construction of 3D road GIS, and improve the speed of roaming and effective visualization. This paper also disusses the combination of 2D digitall road map and 3D road scene, and the dynamic response between them. Finally, on the basis of the research on the transect-based road model, this paper develops the three-dimensional road geographic information system called virtual road ( VRoad ), which not only supplies road designers with a set of tool which can turn the designed 2D road data into 3D road and the high road assistant function area in computer, but also supplies the road management with a set of tool which can realize the road real time and interactive roaming, high-efficiency management.
Three Dimensional Culture of Human Renal Cell Carcinoma Organoids.
Directory of Open Access Journals (Sweden)
Cynthia A Batchelder
Full Text Available Renal cell carcinomas arise from the nephron but are heterogeneous in disease biology, clinical behavior, prognosis, and response to systemic therapy. Development of patient-specific in vitro models that efficiently and faithfully reproduce the in vivo phenotype may provide a means to develop personalized therapies for this diverse carcinoma. Studies to maintain and model tumor phenotypes in vitro were conducted with emerging three-dimensional culture techniques and natural scaffolding materials. Human renal cell carcinomas were individually characterized by histology, immunohistochemistry, and quantitative PCR to establish the characteristics of each tumor. Isolated cells were cultured on renal extracellular matrix and compared to a novel polysaccharide scaffold to assess cell-scaffold interactions, development of organoids, and maintenance of gene expression signatures over time in culture. Renal cell carcinomas cultured on renal extracellular matrix repopulated tubules or vessel lumens in renal pyramids and medullary rays, but cells were not observed in glomeruli or outer cortical regions of the scaffold. In the polysaccharide scaffold, renal cell carcinomas formed aggregates that were loosely attached to the scaffold or free-floating within the matrix. Molecular analysis of cell-scaffold constructs including immunohistochemistry and quantitative PCR demonstrated that individual tumor phenotypes could be sustained for up to 21 days in culture on both scaffolds, and in comparison to outcomes in two-dimensional monolayer cultures. The use of three-dimensional scaffolds to engineer a personalized in vitro renal cell carcinoma model provides opportunities to advance understanding of this disease.
Three-dimensional imaging using differential synthetic aperture interferometry
Zhang, Ning; Zhou, Yu; Sun, Jianfeng; Zhi, Ya'nan; Lu, Zhiyong; Xu, Qian; Sun, Zhiwei; Liu, Liren
2014-09-01
Synthetic aperture radar interferometry (InSAR) can gain three-dimensional topography with high spatial resolution and height accuracy using across track interferometry[1]. Conventional InSAR produce three-dimensional images from SAR data. But when the working wavelength transit from microwave to optical wave, the transmission antenna and receive antenna become very sensitive to platform vibration and beam quality[2]. Through differential receive antenna formation, we can relax the requirement of platform and laser using synthetic aperture imaging ladar (SAIL) concept[3]. Line-of-sight motion constraints are reduced by several orders of magnitude. We introduce two distinctive forms of antenna formation according to the position of interferogram. The first architecture can simplify the interferogram processing and phase extraction algorithm under time-division multiplex operation. The second architecture can process the 2D coordinate and height coordinate at the same time. Using optical diffraction theory, a systematic theory of side-looking SAIL is mathematically formulated and the necessary conditions for assuring a correct phase history are established[4]. Based on optical transformation and regulation of wavefront, a side-looking SAIL of two distinctive architectures is invented and the basic principle, systematic theory, design equations and necessary conditions are presented. It is shown that high height accuracy can be reached and the influences from atmospheric turbulence and unmodeled line-of-sight motion can be automatically compensated.
Three-dimensional scene capturing for the virtual reality display
Dong, Jingsheng; Sang, Xinzhu; Guo, Nan; Chen, Duo; Yan, Binbin; Wang, Kuiru; Dou, Wenhua; Xiao, Liquan
2016-10-01
A virtual reality shooting and display system based on multiple degrees of freedom camera is designed and demonstrated. Three-dimensional scene display and the wide angle display can be achieved easily and quickly through the construction with the proposed system. The range of the viewing scene can be broaden with the image stitching process, and the display in the demonstrated system can achieve the effect of wide angle for applications of image mosaic. In the meantime, the system can realize 3D scene display, which can effectively reduce the complexity of the 3D scene generation, and provide a foundation for adding interactive characteristics for the 3D scene in the future. The system includes an adjustable bracket, computer software, and a virtual reality device. Multiple degrees of freedom of the adjustable bracket are developed to obtain 3D scene source images and mosaic source images easily. 5 degrees of freedom are realized, including rotation, lifting, translation, convergence and pitching. To realize the generation and display of three-dimensional scenes, two cameras are adjusted into a parallel state. With the process of image distortion eliminating and calibration, the image is transferred to the virtual reality device for display. In order to realize wide angle display, the cameras are adjusted into "V" type. The preprocessing includes image matching and fusion to realize image stitching. The mosaic image is transferred for virtual reality display with its image reading and display functions. The wide angle 3D scene display is realized by adjusting different states.
Terahertz Imaging of Three-Dimensional Dehydrated Breast Cancer Tumors
Bowman, Tyler; Wu, Yuhao; Gauch, John; Campbell, Lucas K.; El-Shenawee, Magda
2017-06-01
This work presents the application of terahertz imaging to three-dimensional formalin-fixed, paraffin-embedded human breast cancer tumors. The results demonstrate the capability of terahertz for in-depth scanning to produce cross section images without the need to slice the tumor. Samples of tumors excised from women diagnosed with infiltrating ductal carcinoma and lobular carcinoma are investigated using a pulsed terahertz time domain imaging system. A time of flight estimation is used to obtain vertical and horizontal cross section images of tumor tissues embedded in paraffin block. Strong agreement is shown comparing the terahertz images obtained by electronically scanning the tumor in-depth in comparison with histopathology images. The detection of cancer tissue inside the block is found to be accurate to depths over 1 mm. Image processing techniques are applied to provide improved contrast and automation of the obtained terahertz images. In particular, unsharp masking and edge detection methods are found to be most effective for three-dimensional block imaging.
Three Dimensional Quantum Geometry and Deformed Poincare Symmetry
Joung, E; Noui, K
2008-01-01
We study a three dimensional non-commutative space emerging in the context of three dimensional Euclidean quantum gravity. Our starting point is the assumption that the isometry group is deformed to the Drinfeld double D(SU(2)). We generalize to the deformed case the construction of the flat Euclidean space as the quotient of its isometry group ISU(2) by SU(2). We show that the algebra of functions becomes the non-commutative algebra of SU(2) distributions endowed with the convolution product. This construction gives the action of ISU(2) on the algebra and allows the determination of plane waves and coordinate functions. In particular, we show that: (i) plane waves have bounded momenta; (ii) to a given momentum are associated several SU(2) elements leading to an effective description of an element in the algebra in terms of several physical scalar fields; (iii) their product leads to a deformed addition rule of momenta consistent with the bound on the spectrum. We generalize to the non-commutative setting the...
A biorthogonality relationship for three-dimensional couple stress problem
Institute of Scientific and Technical Information of China (English)
无
2009-01-01
The duality solution for elasticity and the biorthogonality relationship have been well researched. Now the couple stress theory becomes a new research spot but there is few research for the biorthogonality relationship for couple stress theory comparing to classical elasticity. A new state vector is presented for three dimensional couple stress problems of prismatic structures. A new biorthogonality relation- ship of couple stress is discovered. The dual partial differential equations of couple stress problem are derived by the new state vector. By two important identical equations the new biorthogonality rela- tionship is proved based on the method of separation of variables. The symplectic orthogonality rela- tionship to three dimensional couple stress theory may be decomposed into two independently and symmetrically orthogonality relationships. The new biorthogonality relationship includes the symplec- tic orthogonality relationship. The biorthogonality relationship of couple stress may also be degener- ated into the theory of elasticity. The new state vector and biorthogonality relationship provide theo- retic foundation for the research on the schemes of separation of variables and eigenfunction expan- sion of couple stress theory.
The Bio Bay Game: Three-Dimensional Learning of Biomagnification.
Jasti, Chandana; Lauren, Hillary; Wallon, Robert C; Hug, Barbara
2016-01-01
Pressing concerns about sustainability and the state of the environment amplify the need to teach students about the connections between ecosystem health, toxicology, and human health. Additionally, the Next Generation Science Standards call for three-dimensional science learning, which integrates disciplinary core ideas, scientific practices, and crosscutting concepts. The Bio Bay Game is a way to teach students about the biomagnification of toxicants across trophic levels while engaging them in three-dimensional learning. In the game, the class models the biomagnification of mercury in a simple aquatic food chain as they play the roles of anchovies, tuna, and humans. While playing, the class generates data, which they analyze after the game to graphically visualize the buildup of toxicants. Students also read and discuss two articles that draw connections to a real-world case. The activity ends with students applying their understanding to evaluate the game as a model of biomagnification. Throughout the activity, students practice modeling and data analysis and engage with the crosscutting concepts of patterns and cause and effect to develop an understanding of core ideas about the connections between humans and the environment.
Topology of Flow Separation on Three-Dimensional Bodies
Chapman, Gary T.; Yates, Leslie A.
1991-01-01
In recent years there has been extensive research on three-dimensional flow separation. There are two different approaches: the phenomenological approach and a mathematical approach using topology. These two approaches are reviewed briefly and the shortcomings of some of the past works are discussed. A comprehensive approach applicable to incompressible and compressible steady-state flows as well as incompressible unsteady flow is then presented. The approach is similar to earlier topological approaches to separation but is more complete and in some cases adds more emphasis to certain points than in the past. To assist in the classification of various types of flow, nomenclature is introduced to describe the skin-friction portraits on the surface. This method of classification is then demonstrated on several categories of flow to illustrate particular points as well as the diversity of flow separation. The categories include attached, two-dimensional separation and three different types of simple, three-dimensional primary separation, secondary separation, and compound separation. Hypothetical experiments are utilized to illustrate the topological terminology and its role in characterizing these flows. These hypothetical experiments use colored oil injected onto the surface at singular points in the skin-friction portrait. Actual flow-visualization information, if available, is used to corroborate the hypothetical examples.
Three-dimensional protonic conductivity in porous organic cage solids
Liu, Ming; Chen, Linjiang; Lewis, Scott; Chong, Samantha Y.; Little, Marc A.; Hasell, Tom; Aldous, Iain M.; Brown, Craig M.; Smith, Martin W.; Morrison, Carole A.; Hardwick, Laurence J.; Cooper, Andrew I.
2016-01-01
Proton conduction is a fundamental process in biology and in devices such as proton exchange membrane fuel cells. To maximize proton conduction, three-dimensional conduction pathways are preferred over one-dimensional pathways, which prevent conduction in two dimensions. Many crystalline porous solids to date show one-dimensional proton conduction. Here we report porous molecular cages with proton conductivities (up to 10−3 S cm−1 at high relative humidity) that compete with extended metal-organic frameworks. The structure of the organic cage imposes a conduction pathway that is necessarily three-dimensional. The cage molecules also promote proton transfer by confining the water molecules while being sufficiently flexible to allow hydrogen bond reorganization. The proton conduction is explained at the molecular level through a combination of proton conductivity measurements, crystallography, molecular simulations and quasi-elastic neutron scattering. These results provide a starting point for high-temperature, anhydrous proton conductors through inclusion of guests other than water in the cage pores. PMID:27619230
Conformal Boundary Conditions and Three-Dimensional Topological Field Theory
Felder, Giovanni; Fröhlich, Jürg; Fuchs, Jürgen; Schweigert, Christoph
2000-02-01
We present a general construction of all correlation functions of a two-dimensional rational conformal field theory, for an arbitrary number of bulk and boundary fields and arbitrary topologies. The correlators are expressed in terms of Wilson graphs in a certain three-manifold, the connecting manifold. The amplitudes constructed this way can be shown to be modular invariant and to obey the correct factorization rules.
Conformal boundary conditions and three-dimensional topological field theory
Felder, G; Fuchs, J; Schweigert, C
2000-01-01
We present a general construction of all correlation functions of a two-dimensional rational conformal field theory, for an arbitrary number of bulk and boundary fields and arbitrary topologies. The correlators are expressed in terms of Wilson graphs in a certain three-manifold, the connecting manifold. The amplitudes constructed this way can be shown to be modular invariant and to obey the correct factorization rules.
Li, Guoqiang; Huang, Dawei; Yuceturk, Emel; Marchand, Philippe J; Esener, Sadik C; Ozguz, Volkan H; Liu, Yue
2002-01-10
We present a demonstration system under the three-dimensional (3D) optoelectronic stacked processor consortium. The processor combines the advantages of optics in global, high-density, high-speed parallel interconnections with the density and computational power of 3D chip stacks. In particular, a compact and scalable optoelectronic switching system with a high bandwidth is designed. The system consists of three silicon chip stacks, each integrated with a single vertical-cavity-surface-emitting-laser-metal-semiconductor-metal detector array and an optical interconnection module. Any input signal at one end stack can be switched through the central crossbar stack to any output channel on the opposite end stack. The crossbar bandwidth is designed to be 256 Gb/s. For the free-space optical interconnection, a novel folded hybrid micro-macro optical system with a concave reflection mirror has been designed. The optics module can provide a high resolution, a large field of view, a high link efficiency, and low optical cross talk. It is also symmetric and modular. Off-the-shelf macro-optical components are used. The concave reflection mirror can significantly improve the image quality and tolerate a large misalignment of the optical components, and it can also compensate for the lateral shift of the chip stacks. Scaling of the macrolens can be used to adjust the interconnection length between the chip stacks or make the system more compact. The components are easy to align, and only passive alignment is required. Optics and electronics are separated until the final assembly step, and the optomechanic module can be removed and replaced. By use of 3D chip stacks, commercially available optical components, and simple passive packaging techniques, it is possible to achieve a high-performance optoelectronic switching system.
Isotropic three-dimensional MRI-Fricke-infused gel dosimetry
Energy Technology Data Exchange (ETDEWEB)
Cho, Nai-Yu; Chu, Woei-Chyn [Institute of Biomedical Engineering, National Yang-Ming University, Taipei 11221, Taiwan (China); Huang, Sung-Cheng [Department of Molecular and Medical Pharmacology, UCLA David Geffen School of Medicine, Los Angeles, California 90095 (United States); Chung, Wen-Yuh [Neurological Institute, Taipei Veterans General Hospital, Taipei 11217, Taiwan (China); Guo, Wan-Yuo [Department of Radiology, Taipei Veterans General Hospital, Taipei 11217, Taiwan (China)
2013-05-15
Purpose: Fricke-infused gel has been shown to be a simple and attainable method for the conformal measurement of absorbed radiation dose. Nevertheless, its accuracy is seriously hindered by the irreversible ferric ion diffusion during magnetic resonance imaging, particularly when three-dimensional (3D) dose measurement in radiosurgery is considered. In this study, the authors developed a fast three-dimensional spin-echo based Fricke gel dosimetry technique to reduce the adverse effects of ferric ion diffusion and to obtain an accurate isotropic 3D dose measurement. Methods: A skull shaped phantom containing Fricke-infused gel was irradiated using Leksell Gamma Knife. The rapid image-based dosimetry technique was applied with the use of a 3D fast spin-echo magnetic resonance imaging sequence. The authors mathematically derived and experimentally validated the correlations between dose-response characteristics and parameters of the 3D fast spin-echo MR imaging sequence. Absorbed dose profiles were assessed and compared to the calculated profiles given by the Gamma Knife treatment planning system. Coefficient of variance (CV%) and coefficient of determination (R{sup 2}) were used to evaluate the precision of dose-response curve estimation. The agreement between the measured and the planned 3D dose distributions was quantified by gamma-index analysis of two acceptance criteria. Results: Proper magnetic resonance imaging parameters were explored to render an accurate three-dimensional absorbed dose mapping with a 1 mm{sup 3} isotropic image resolution. The efficacy of the dose-response estimation was approved by an R{sup 2} > 0.99 and an average CV% of 1.6%. Average gamma pass-rate between the experimentally measured and GammaPlan calculated dose distributions were 83.8% and 99.7% for 2%/2 and 3%/3 mm criteria, respectively. Conclusions: With the designed MR imaging sequence and parameters, total 3D MR acquisition time was confined to within 20 min postirradiation
Directory of Open Access Journals (Sweden)
Inge A Hoevenaren
Full Text Available Using three-dimensional (3D stereophotogrammetry precise images and reconstructions of the human body can be produced. Over the last few years, this technique is mainly being developed in the field of maxillofacial reconstructive surgery, creating fusion images with computed tomography (CT data for precise planning and prediction of treatment outcome. Though, in hand surgery 3D stereophotogrammetry is not yet being used in clinical settings.A total of 34 three-dimensional hand photographs were analyzed to investigate the reproducibility. For every individual, 3D photographs were captured at two different time points (baseline T0 and one week later T1. Using two different registration methods, the reproducibility of the methods was analyzed. Furthermore, the differences between 3D photos of men and women were compared in a distance map as a first clinical pilot testing our registration method.The absolute mean registration error for the complete hand was 1.46 mm. This reduced to an error of 0.56 mm isolating the region to the palm of the hand. When comparing hands of both sexes, it was seen that the male hand was larger (broader base and longer fingers than the female hand.This study shows that 3D stereophotogrammetry can produce reproducible images of the hand without harmful side effects for the patient, so proving to be a reliable method for soft tissue analysis. Its potential use in everyday practice of hand surgery needs to be further explored.
Three-Dimensional Structure of CeO2 Nanocrystals
DEFF Research Database (Denmark)
Tan, Joyce Pei Ying; Tan, Hui Ru; Boothroyd, Chris
2011-01-01
Visualization of three-dimensional (3D) structures of materials at the nanometer scale can shed important information on the performance of their applications and provide insight into the growth mechanism of shape-controlled nanomaterials. In this paper, the 3D structures and growth pathway of CeO2...... in samples synthesized under different conditions. The homogeneous growth environment in solution with polyvinylpyrrolidone (PVP) molecules led to the formation of regular octahedral CeO2 nanocrystals with small {001} facet truncations. When the PVP surfactant was removed, the aggregation of regular...... truncated octahedral CeO2 particles through a lattice matched interface generated irregular compressed truncated octahedral CeO2 nanoparticles. The formation of this irregular shape is attributed to the lower surface diffusion and slow incorporation of atoms on surfaces by step attachment of the fused...
Three-dimensional reconstruction of the intra-cluster medium
Puchwein, E; Puchwein, Ewald; Bartelmann, Matthias
2005-01-01
We propose and test a new method based on Richardson-Lucy deconvolution to reconstruct three-dimensional gas density and temperature distributions in galaxy clusters from combined X-ray and thermal Sunyaev-Zel'dovich observations. Clusters are assumed to be axially symmetric and arbitrarily inclined with respect to the line-of-sight. No equilibrium assumption other than local thermal equilibrium is needed. We test the algorithm with synthetic observations of analytically modeled and numerically simulated galaxy clusters and discuss the quality of the density and temperature reconstructions in idealised situations and in presence of observational noise, deviations from axial symmetry and cluster substructure. We find that analytic and numerical gas density and temperature distributions can be accurately reconstructed in three dimensions, even if observational noise is present. We also discuss methods for determining the inclination angle from data and show that it can be constrained using X-ray temperature map...
Three-dimensional laser-assisted processing of bioceramics
Comesaña, R.; Lusquiños, F.; del Val, J.; Malot, T.; Riveiro, A.; Quintero, F.; Boutinguiza, M.; Aubry, P.; Pou, J.
The study of calcium phosphate bioceramics processing by rapid prototyping based on laser cladding was tackled in this work. This technique shows a great potential to provide a three-dimensional tailored implant adapted to the specific problem of each patient. Working window to produce stable geometrical features and repeatable microstructures was established by real time process monitoring and characterization of the processed material. The relationships between the processing parameters and the obtained properties are discussed, in addition to the biological behaviour of the produced parts. The obtained calcium phosphate phases (oxyapatite, tricalcium phosphate, tetracalcium phosphate and amorphous calcium phosphate) are found to favorably influence the degradability of the precursor hydroxyapatite in Tris-HCl buffer which is a good sign of the favorable behavior of this type of materials when implanted 'in vivo'.
Three-dimensional microfabrication through a multimode optical fiber
Morales-Delgado, Edgar E; Conkey, Donald B; Stasio, Nicolino; Psaltis, Demetri; Moser, Christophe
2016-01-01
Additive manufacturing, also known as 3D printing, is an advanced manufacturing technique that allows the fabrication of arbitrary macroscopic and microscopic objects. All 3D printing systems require large optical elements or nozzles in proximity to the built structure. This prevents their use in applications in which there is no direct access to the area where the objects have to be printed. Here, we demonstrate three-dimensional microfabrication based on two-photon polymerization (TPP) with sub diffraction-limited resolution through an ultra-thin, 50 mm long printing nozzle of 560 micrometers in diameter. Using wavefront shaping, femtosecond infrared pulses are focused and scanned through a multimode optical fiber (MMF) inside a photoresist that polymerizes via two-photon absorption. We show the construction of arbitrary 3D structures of 500 nm resolution on the other side of the fiber. To our knowledge, this is the first demonstration of microfabrication through a multimode optical fiber. Our work represen...
Hydrogel microfabrication technology toward three dimensional tissue engineering
Directory of Open Access Journals (Sweden)
Fumiki Yanagawa
2016-03-01
Full Text Available The development of biologically relevant three-dimensional (3D tissue constructs is essential for the alternative methods of organ transplantation in regenerative medicine, as well as the development of improved drug discovery assays. Recent technological advances in hydrogel microfabrication, such as micromolding, 3D bioprinting, photolithography, and stereolithography, have led to the production of 3D tissue constructs that exhibit biological functions with precise 3D microstructures. Furthermore, microfluidics technology has enabled the development of the perfusion culture of 3D tissue constructs with vascular networks. In this review, we present these hydrogel microfabrication technologies for the in vitro reconstruction and cultivation of 3D tissues. Additionally, we discuss current challenges and future perspectives of 3D tissue engineering.
Three dimensional simulation for bayou choctaw strategic petroleum reserve (SPR).
Energy Technology Data Exchange (ETDEWEB)
Ehgartner, Brian L. (Sandia National Laboratories, Albuquerque, NM); Park, Byoung Yoon; Lee, Moo Yul
2006-12-01
Three dimensional finite element analyses were performed to evaluate the structural integrity of the caverns located at the Bayou Choctaw (BC) site which is considered a candidate for expansion. Fifteen active and nine abandoned caverns exist at BC, with a total cavern volume of some 164 MMB. A 3D model allowing control of each cavern individually was constructed because the location and depth of caverns and the date of excavation are irregular. The total cavern volume has practical interest, as this void space affects total creep closure in the BC salt mass. Operations including both cavern workover, where wellhead pressures are temporarily reduced to atmospheric, and cavern enlargement due to leaching during oil drawdowns that use water to displace the oil from the caverns, were modeled to account for as many as the five future oil drawdowns in the six SPR caverns. The impacts on cavern stability, underground creep closure, surface subsidence, infrastructure, and well integrity were quantified.
Three-dimensional stability of growing boundary layers
Nayfeh, A. H.
1980-01-01
A theory is developed for the linear stability of three-dimensional growing boundary layers. The method of multiple scales is used to derive partial-differential equations describing the temporal and spatial evolution of the complex amplitudes and wavenumbers of the disturbances. In general, these equations are elliptic unless certain conditions are satisfied. For a monochromatic disturbance, these conditions demand that the ratio of the components of the complex group velocity be real and thereby relate the direction of growth of the disturbance to the disturbance wave angle. For a nongrowing boundary layer, this condition reduces to d-alpha/d-beta being real, in agreement with the result obtained by using the saddle-point method. For a wavepacket, these conditions demand that the components of the group velocity be real.
Augmented reality three-dimensional display with light field fusion.
Xie, Songlin; Wang, Peng; Sang, Xinzhu; Li, Chengyu
2016-05-30
A video see-through augmented reality three-dimensional display method is presented. The system that is used for dense viewpoint augmented reality presentation fuses the light fields of the real scene and the virtual model naturally. Inherently benefiting from the rich information of the light field, depth sense and occlusion can be handled under no priori depth information of the real scene. A series of processes are proposed to optimize the augmented reality performance. Experimental results show that the reconstructed fused 3D light field on the autostereoscopic display is well presented. The virtual model is naturally integrated into the real scene with a consistence between binocular parallax and monocular depth cues.
Split Bregman's algorithm for three-dimensional mesh segmentation
Habiba, Nabi; Ali, Douik
2016-05-01
Variational methods have attracted a lot of attention in the literature, especially for image and mesh segmentation. The methods aim at minimizing the energy to optimize both edge and region detections. We propose a spectral mesh decomposition algorithm to obtain disjoint but meaningful regions of an input mesh. The related optimization problem is nonconvex, and it is very difficult to find a good approximation or global optimum, which represents a challenge in computer vision. We propose an alternating split Bregman algorithm for mesh segmentation, where we extended the image-dedicated model to a three-dimensional (3-D) mesh one. By applying our scheme to 3-D mesh segmentation, we obtain fast solvers that can outperform various conventional ones, such as graph-cut and primal dual methods. A consistent evaluation of the proposed method on various public domain 3-D databases for different metrics is elaborated, and a comparison with the state-of-the-art is performed.
A resolution measure for three-dimensional microscopy.
Chao, Jerry; Ram, Sripad; Abraham, Anish V; Ward, E Sally; Ober, Raimund J
2009-05-01
A three-dimensional (3D) resolution measure for the conventional optical microscope is introduced which overcomes the drawbacks of the classical 3D (axial) resolution limit. Formulated within the context of a parameter estimation problem and based on the Cramer-Rao lower bound, this 3D resolution measure indicates the accuracy with which a given distance between two objects in 3D space can be determined from the acquired image. It predicts that, given enough photons from the objects of interest, arbitrarily small distances of separation can be estimated with prespecified accuracy. Using simulated images of point source pairs, we show that the maximum likelihood estimator is capable of attaining the accuracy predicted by the resolution measure. We also demonstrate how different factors, such as extraneous noise sources and the spatial orientation of the imaged object pair, can affect the accuracy with which a given distance of separation can be determined.
Recursive three-dimensional model reconstruction based on Kalman filtering.
Yu, Ying Kin; Wong, Kin Hong; Chang, Michael Ming Yuen
2005-06-01
A recursive two-step method to recover structure and motion from image sequences based on Kalman filtering is described in this paper. The algorithm consists of two major steps. The first step is an extended Kalman filter (EKF) for the estimation of the object's pose. The second step is a set of EKFs, one for each model point, for the refinement of the positions of the model features in the three-dimensional (3-D) space. These two steps alternate from frame to frame. The initial model converges to the final structure as the image sequence is scanned sequentially. The performance of the algorithm is demonstrated with both synthetic data and real-world objects. Analytical and empirical comparisons are made among our approach, the interleaved bundle adjustment method, and the Kalman filtering-based recursive algorithm by Azarbayejani and Pentland. Our approach outperformed the other two algorithms in terms of computation speed without loss in the quality of model reconstruction.
Three-dimensional measurement and characterization of grinding tool topography
Cui, Changcai; Blunt, Liam; Jiang, Xiangqian; Xu, Xipeng; Huang, Hui; Ye, Ruifang
2013-01-01
A comprehensive 3-dimensional measurement and characterization method for grinding tool topography was developed. A stylus instrument (SOMICRONIC, France) was used to measure the surface of a metal-bonded diamond grinding tool. The sampled data was input the software SurfStand developed by Centre for Precision Technology (CPT) for reconstruction and further characterization of the surface. Roughness parameters pertaining to the general surface and specific feature parameters relating to the grinding grits, such as height and angle peak curvature have been calculated. The methodology of measurement has been compared with that using an optical microscope. The comparison shows that the three-dimensional characterization has distinct advantages for grinding tool topography assessment. It is precise, convenient and comprehensive so it is suitable for precision measurement and analysis where an understanding of the grinding tool and its cutting ability are required.
Three-dimensional flow measurements in a tesla turbine rotor
Fuchs, Thomas; Schosser, Constantin; Hain, Rainer; Kaehler, Christian
2015-11-01
Tesla turbines are fluid mechanical devices converting flow energy into rotation energy by two physical effects: friction and adhesion. The advantages of the tesla turbine are its simple and robust design, as well as its scalability, which makes it suitable for custom power supply solutions, and renewable energy applications. To this day, there is a lack of experimental data to validate theoretical studies, and CFD simulations of these turbines. This work presents a comprehensive analysis of the flow through a tesla turbine rotor gap, with a gap height of only 0.5 mm, by means of three-dimensional Particle Tracking Velocimetry (3D-PTV). For laminar flows, the experimental results match the theory very well, since the measured flow profiles show the predicted second order parabolic shape in radial direction and a fourth order behavior in circumferential direction. In addition to these laminar measurements, turbulent flows at higher mass flow rates were investigated.
Three dimensional density cavities in guide field collisionless magnetic reconnection
Markidis, Stefano; Divin, Andrey; Goldman, Martin V; Newman, D; Andersson, Laila
2012-01-01
Particle-in-Cell simulations of collisionless magnetic reconnection with a guide field reveal for the first time the three dimensional features of the low density regions along the magnetic reconnection separatrices, the so-called "cavities". It is found that structures with further lower density develop within the cavities. Because their appearance is similar to the rib shape, these formations are here called "low density ribs". Their location remains approximately fixed in time and their density progressively decreases, as electron currents along the cavities evacuate them. They develop along the magnetic field lines and are supported by a strong perpendicular electric field that oscillates in space. In addition, bipolar parallel electric field structures form as isolated spheres between the cavities and the outflow plasma, along the direction of the low density ribs and of magnetic field lines.
Quantitative volumetric Raman imaging of three dimensional cell cultures
Kallepitis, Charalambos; Bergholt, Mads S.; Mazo, Manuel M.; Leonardo, Vincent; Skaalure, Stacey C.; Maynard, Stephanie A.; Stevens, Molly M.
2017-03-01
The ability to simultaneously image multiple biomolecules in biologically relevant three-dimensional (3D) cell culture environments would contribute greatly to the understanding of complex cellular mechanisms and cell-material interactions. Here, we present a computational framework for label-free quantitative volumetric Raman imaging (qVRI). We apply qVRI to a selection of biological systems: human pluripotent stem cells with their cardiac derivatives, monocytes and monocyte-derived macrophages in conventional cell culture systems and mesenchymal stem cells inside biomimetic hydrogels that supplied a 3D cell culture environment. We demonstrate visualization and quantification of fine details in cell shape, cytoplasm, nucleus, lipid bodies and cytoskeletal structures in 3D with unprecedented biomolecular specificity for vibrational microspectroscopy.
GPU-ACCELERATED FEM SOLVER FOR THREE DIMENSIONAL ELECTROMAGNETIC ANALYSIS
Institute of Scientific and Technical Information of China (English)
Tian Jin; Gong Li; Shi Xiaowei; Le Xu
2011-01-01
A new Graphics Processing Unit (GPU) parallelization strategy is proposed to accelerate sparse finite element computation for three dimensional electromagnetic analysis.The parallelization strategy is employed based on a new compression format called sliced ELL Four (sliced ELL-F).The sliced ELL-F format-based parallelization strategy is designed for hastening many addition,dot product,and Sparse Matrix Vector Product (SMVP) operations in the Conjugate Gradient Norm (CGN) calculation of finite element equations.The new implementation of SMVP on GPUs is evaluated.The proposed strategy executed on a GPU can efficiently solve sparse finite element equations,especially when the equations are huge sparse (size of most rows in a coefficient matrix is less than 8).Numerical results show the sliced ELL-F format-based parallelization strategy can reach significant speedups compared to Compressed Sparse Row (CSR) format.
An exactly solvable three-dimensional nonlinear quantum oscillator
Energy Technology Data Exchange (ETDEWEB)
Schulze-Halberg, A. [Department of Mathematics and Actuarial Science, Indiana University Northwest, 3400 Broadway, Gary, Indiana 46408 (United States); Morris, J. R. [Department of Physics, Indiana University Northwest, 3400 Broadway, Gary, Indiana 46408 (United States)
2013-11-15
Exact analytical, closed-form solutions, expressed in terms of special functions, are presented for the case of a three-dimensional nonlinear quantum oscillator with a position dependent mass. This system is the generalization of the corresponding one-dimensional system, which has been the focus of recent attention. In contrast to other approaches, we are able to obtain solutions in terms of special functions, without a reliance upon a Rodrigues-type of formula. The wave functions of the quantum oscillator have the familiar spherical harmonic solutions for the angular part. For the s-states of the system, the radial equation accepts solutions that have been recently found for the one-dimensional nonlinear quantum oscillator, given in terms of associated Legendre functions, along with a constant shift in the energy eigenvalues. Radial solutions are obtained for all angular momentum states, along with the complete energy spectrum of the bound states.
Three-Dimensional Reconstruction of the Mouse Nephron
DEFF Research Database (Denmark)
Zhai, Xiao-Yue; Thomsen, Jesper Skovhus; Birn, Henrik;
2006-01-01
contributed to a 27% average increase in the lengths of the corresponding segments, (2) the thick-walled tubules incorporated in the central part of the vascular bundles in the inner stripe of the outer medulla were identified as thick ascending limbs of long-looped nephrons, and (3) three types of short......, including the spatial course of the tubules, lengths of different segments of nephrons, histotopography of tubules and vascular bundles, and epithelial ultrastructure at well-defined positions along Henle’s loop and the distal convolution of nephrons. Three-dimensional reconstruction of 200 nephrons...... and collecting ducts was performed on aligned digital images, obtained from 2.5-µm-thick serial sections of mouse kidneys. Important new findings were highlighted: (1) A tortuous course of the descending thin limbs of long-looped nephrons and a winding course of the thick ascending limbs of short-looped nephrons...
Autostereoscopic three-dimensional display based on two parallax barriers.
Luo, Jiang-Yong; Wang, Qiong-Hua; Zhao, Wu-Xiang; Li, Da-Hai
2011-06-20
An autostereoscopic three-dimensional (3D) display composed of a flat-panel display, two parallax barriers, and a backlight panel is proposed. Parallax barrier 1, located between the backlight panel and the flat-panel display, divides the lights to create the perception of stereoscopic images. Parallax barrier 2, located between the flat-panel display and the viewers, acts as the function of decreasing the cross talk of the stereoscopic images. The operation principle of the display and the calculation equations for the parallax barriers are described in detail. An autostereoscopic 3D display prototype is developed. The prototype presents high-quality stereoscopic images. At the optimal viewing distance, it presents stereoscopic images without cross talk. At other viewing distances, it has less cross talk than a conventional autostereoscopic 3D display based on one parallax.
Application of a three-dimensional display in diagnostic imaging.
Baxter, B; Hitchner, L E; Anderson, R E
1982-10-01
An autostereoscopic viewing device for tomographic scans that allows a physician to examine multiple computed tomography sections with each section properly positioned in three dimensions has been constructed and tested. Images produced on the device allow the observer to utilize both motion parallax and stereoscopic depth cues as if viewing a real three-dimensional (3D) object. These 3D images can be very striking because of the ease with which one can form a true impression of depth relationships. We describe operating principles of the viewing device and the appearance of images produced on it. Stereo photographs made from 3D images displayed on the device are included to illustrate potential applications and problems.
A three-dimensional magnetostatics computer code for insertion devices.
Chubar, O; Elleaume, P; Chavanne, J
1998-05-01
RADIA is a three-dimensional magnetostatics computer code optimized for the design of undulators and wigglers. It solves boundary magnetostatics problems with magnetized and current-carrying volumes using the boundary integral approach. The magnetized volumes can be arbitrary polyhedrons with non-linear (iron) or linear anisotropic (permanent magnet) characteristics. The current-carrying elements can be straight or curved blocks with rectangular cross sections. Boundary conditions are simulated by the technique of mirroring. Analytical formulae used for the computation of the field produced by a magnetized volume of a polyhedron shape are detailed. The RADIA code is written in object-oriented C++ and interfaced to Mathematica [Mathematica is a registered trademark of Wolfram Research, Inc.]. The code outperforms currently available finite-element packages with respect to the CPU time of the solver and accuracy of the field integral estimations. An application of the code to the case of a wedge-pole undulator is presented.
Applications of three-dimensional printing technology in urological practice.
Youssef, Ramy F; Spradling, Kyle; Yoon, Renai; Dolan, Benjamin; Chamberlin, Joshua; Okhunov, Zhamshid; Clayman, Ralph; Landman, Jaime
2015-11-01
A rapid expansion in the medical applications of three-dimensional (3D)-printing technology has been seen in recent years. This technology is capable of manufacturing low-cost and customisable surgical devices, 3D models for use in preoperative planning and surgical education, and fabricated biomaterials. While several studies have suggested 3D printers may be a useful and cost-effective tool in urological practice, few studies are available that clearly demonstrate the clinical benefit of 3D-printed materials. Nevertheless, 3D-printing technology continues to advance rapidly and promises to play an increasingly larger role in the field of urology. Herein, we review the current urological applications of 3D printing and discuss the potential impact of 3D-printing technology on the future of urological practice.
Three-dimensional Tissue Culture Based on Magnetic Cell Levitation
Souza, Glauco R.; Molina, Jennifer R.; Raphael, Robert M.; Ozawa, Michael G.; Stark, Daniel J.; Levin, Carly S.; Bronk, Lawrence F.; Ananta, Jeyarama S.; Mandelin, Jami; Georgescu, Maria-Magdalena; Bankson, James A.; Gelovani, Juri G.
2015-01-01
Cell culture is an essential tool for drug discovery, tissue engineering, and stem cell research. Conventional tissue culture produces two-dimensional (2D) cell growth with gene expression, signaling, and morphology that can differ from those in vivo and thus compromise clinical relevancy1–5. Here we report a three-dimensional (3D) culture of cells based on magnetic levitation in the presence of hydrogels containing gold and magnetic iron oxide (MIO) nanoparticles plus filamentous bacteriophage. This methodology allows for control of cell mass geometry and guided, multicellular clustering of different cell types in co-culture through spatial variance of the magnetic field. Moreover, magnetic levitation of human glioblastoma cells demonstrates similar protein expression profiles to those observed in human tumor xenografts. Taken together, these results suggest levitated 3D culture with magnetized phage-based hydrogels more closely recapitulates in vivo protein expression and allows for long-term multi-cellular studies. PMID:20228788
Three Dimensional Modeling of an MRI Actuated Steerable Catheter System.
Liu, Taoming; Cavuşoğlu, M Cenk
2014-01-01
This paper presents the three dimensional kinematic modeling of a novel steerable robotic ablation catheter system. The catheter, embedded with a set of current-carrying micro-coils, is actuated by the magnetic forces generated by the magnetic field of the MRI scanner. This paper develops a 3D model of the MRI actuated steerable catheter system by using finite differences approach. For each finite segment, a quasi-static torque-deflection equilibrium equation is calculated using beam theory. By using the deflection displacements and torsion angles, the kinematic modeling of the catheter system is derived. The proposed models are evaluated by comparing the simulation results of the proposed model with the experimental results of a proof-of-concept prototype.
Visualising very large phylogenetic trees in three dimensional hyperbolic space
Directory of Open Access Journals (Sweden)
Liberles David A
2004-04-01
Full Text Available Abstract Background Common existing phylogenetic tree visualisation tools are not able to display readable trees with more than a few thousand nodes. These existing methodologies are based in two dimensional space. Results We introduce the idea of visualising phylogenetic trees in three dimensional hyperbolic space with the Walrus graph visualisation tool and have developed a conversion tool that enables the conversion of standard phylogenetic tree formats to Walrus' format. With Walrus, it becomes possible to visualise and navigate phylogenetic trees with more than 100,000 nodes. Conclusion Walrus enables desktop visualisation of very large phylogenetic trees in 3 dimensional hyperbolic space. This application is potentially useful for visualisation of the tree of life and for functional genomics derivatives, like The Adaptive Evolution Database (TAED.
Modified gravity in three dimensional metric-affine scenarios
Bambi, Cosimo; Rubiera-Garcia, D
2015-01-01
We consider metric-affine scenarios where a modified gravitational action is sourced by electrovacuum fields in a three dimensional space-time. Such scenarios are supported by the physics of crystalline structures with microscopic defects and, in particular, those that can be effectively treated as bi-dimensional (like graphene). We first study the case of $f(R)$ theories, finding deviations near the center as compared to the solutions of General Relativity. We then consider Born-Infeld gravity, which has raised a lot of interest in the last few years regarding its applications in astrophysics and cosmology, and show that new features always arise at a finite distance from the center. Several properties of the resulting space-times, in particular in presence of a cosmological constant term, are discussed.
Three-Dimensional Genome Organization and Function in Drosophila.
Schwartz, Yuri B; Cavalli, Giacomo
2017-01-01
Understanding how the metazoan genome is used during development and cell differentiation is one of the major challenges in the postgenomic era. Early studies in Drosophila suggested that three-dimensional (3D) chromosome organization plays important regulatory roles in this process and recent technological advances started to reveal connections at the molecular level. Here we will consider general features of the architectural organization of the Drosophila genome, providing historical perspective and insights from recent work. We will compare the linear and spatial segmentation of the fly genome and focus on the two key regulators of genome architecture: insulator components and Polycomb group proteins. With its unique set of genetic tools and a compact, well annotated genome, Drosophila is poised to remain a model system of choice for rapid progress in understanding principles of genome organization and to serve as a proving ground for development of 3D genome-engineering techniques. Copyright © 2017 Schwartz and Cavalli.
Three-Dimensional Image Compression With Integer Wavelet Transforms
Bilgin, Ali; Zweig, George; Marcellin, Michael W.
2000-04-01
A three-dimensional (3-D) image-compression algorithm based on integer wavelet transforms and zerotree coding is presented. The embedded coding of zerotrees of wavelet coefficients (EZW) algorithm is extended to three dimensions, and context-based adaptive arithmetic coding is used to improve its performance. The resultant algorithm, 3-D CB-EZW, efficiently encodes 3-D image data by the exploitation of the dependencies in all dimensions, while enabling lossy and lossless decompression from the same bit stream. Compared with the best available two-dimensional lossless compression techniques, the 3-D CB-EZW algorithm produced averages of 22%, 25%, and 20% decreases in compressed file sizes for computed tomography, magnetic resonance, and Airborne Visible Infrared Imaging Spectrometer images, respectively. The progressive performance of the algorithm is also compared with other lossy progressive-coding algorithms.
Cavity quantum electrodynamics with three-dimensional photonic bandgap crystals
Vos, W L
2015-01-01
This paper gives an overview of recent work on three-dimensional (3D) photonic crystals with a "full and complete" 3D photonic band gap. We review five main aspects: 1) spontaneous emission inhibition, 2) spatial localization of light within a tiny nanoscale volume (aka "a nanobox for light"), 3) the introduction of a gain medium leading to thresholdless lasers, 4) breaking of the weak-coupling approximation of cavity QED, both in the frequency and in the time-domain, 5) decoherence, in particular the shielding of vacuum fluctuations by a 3D photonic bandgap. In addition, we list and evaluate all known photonic crystal structures with a demonstrated 3D band gap.
Inner mechanics of three-dimensional black holes.
Detournay, Stéphane
2012-07-20
We investigate properties of the inner horizons of certain black holes in higher-derivative three-dimensional gravity theories. We focus on Bañados-Teitelboim-Zanelli and spacelike warped anti-de Sitter black holes, as well as on asymptotically warped de Sitter solutions exhibiting both a cosmological and a black hole horizon. We verify that a first law is satisfied at the inner horizon, in agreement with the proposal of Castro and Rodriguez [arXiv:1204.1284]. We then show that, in topologically massive gravity, the product of the areas of the inner and outer horizons fails to be independent on the mass, and we trace this to the diffeomorphism anomaly of the theory.
Three-dimensional simulation of a microplasma pump
Wang, Chin-Cheng; Roy, Subrata
2009-09-01
We present a three-dimensional simulation of dielectric barrier discharge (DBD) using the finite element based multiscale ionized gas (MIG) flow code. The two-species hydrodynamic plasma model coupled Poisson equation and Navier-Stokes equation are solved using MIG flow code to predict complicated flow structure inside a plasma induced micropump. The advantage of such a micropump is rapid on/off switching without any moving parts. Results show a reasonable distribution for ion and electron densities as well as an electric field. The key factors of microplasma pump design are the location of actuators and input voltage. The flow rate of the microplasma pump is on the order of ml min-1. Such a flow rate may be beneficial for micropropulsion in space.
Applications of three-dimensional carbon nanotube networks
Directory of Open Access Journals (Sweden)
Manuela Scarselli
2015-03-01
Full Text Available In this paper, we show that it is possible to synthesize carbon-based three-dimensional networks by adding sulfur, as growth enhancer, during the synthesis process. The obtained material is self-supporting and consists of curved and interconnected carbon nanotubes and to lesser extent of carbon fibers. Studies on the microstructure indicate that the assembly presents a marked variability in the tube external diameter and in the inner structure. We study the relationship between the observed microscopic properties and some potential applications. In particular, we show that the porous nature of the network is directly responsible for the hydrophobic and the lipophilic behavior. Moreover, we used a cut piece of the produced carbon material as working electrode in a standard electrochemical cell and, thus, demonstrating the capability of the system to respond to incident light in the visible and near-ultraviolet region and to generate a photocurrent.
Transport in three-dimensional topological insulators: Theory and experiment
Culcer, Dimitrie
2012-02-01
This paper reviews recent theoretical and experimental work on transport due to the surface states of three-dimensional topological insulators. The theoretical focus is on longitudinal transport in the presence of an electric field, including Boltzmann transport, quantum corrections and weak localization, as well as longitudinal and Hall transport in the presence of both electric and magnetic fields and/or magnetizations. Special attention is paid to transport at finite doping, and to the π-Berry phase, which leads to the absence of backscattering, Klein tunneling and half-quantized Hall response. Signatures of surface states in ordinary transport and magnetotransport are identified. The review also covers transport experiments of the past years, tracing its evolution from the initial obscuring of surface transport by bulk transport to the increasing success of experimental work in identifying transport due to the surface states. Current and likely future experimental challenges are given prominence and the present status of the field is assessed.
Discriminating the structure of rotated three-dimensional figures.
Barfield, W; Salvendy, G
1987-10-01
Visualizing the structure of transformed (by rotation) three-dimensional (3-D) figures is an important aspect of information processing for computer-graphics tasks. However, little research exists to establish the speed and accuracy in which subjects perform discrimination tasks for transformed images and the effects of rotation variables on perceiving transformed images. This research tests the effects of figural complexity, angles and axes of rotation on the speed and accuracy in which subjects discriminate the structure of rotated 3-D wireframe images. Results show that response times are affected more by angles than axes of rotation, the specific form of the image affects error rates, and the number of 90 degrees bends which determine the structure of an image may be an inadequate measure of form complexity for the task described here.
Three-dimensional chemotaxis model for a crawling neutrophil.
Song, Jihwan; Kim, Dongchoul
2010-11-01
Chemotactic cell migration is a fundamental phenomenon in complex biological processes. A rigorous understanding of the chemotactic mechanism of crawling cells has important implications for various medical and biological applications. In this paper, we propose a three-dimensional model of a single crawling cell to study its chemotaxis. A single-cell study of chemotaxis has an advantage over studies of a population of cells in that it provides a clearer observation of cell migration, which leads to more accurate assessments of chemotaxis. The model incorporates the surface energy of the cell and the interfacial interaction between the cell and substrate. The semi-implicit Fourier spectral method is applied to achieve high efficiency and numerical stability. The simulation results provide the kinetic and morphological traits of a crawling cell during chemotaxis.
On Using Taylor's Hypothesis for Three-Dimensional Mixing Layers
LeBoeuf, Richard L.; Mehta, Rabindra D.
1995-01-01
In the present study, errors in using Taylor's hypothesis to transform measurements obtained in a temporal (or phase) frame onto a spatial one were evaluated. For the first time, phase-averaged ('real') spanwise and streamwise vorticity data measured on a three-dimensional grid were compared directly to those obtained using Taylor's hypothesis. The results show that even the qualitative features of the spanwise and streamwise vorticity distributions given by the two techniques can be very different. This is particularly true in the region of the spanwise roller pairing. The phase-averaged spanwise and streamwise peak vorticity levels given by Taylor's hypothesis are typically lower (by up to 40%) compared to the real measurements.
3N Scattering in a Three-Dimensional Operator Formulation
Glöckle, W; Elster, Ch; Golak, J; Skibinski, R; Witala, H
2009-01-01
A recently developed formulation for a direct treatment of the equations for two- and three-nucleon bound states as set of coupled equations of scalar functions depending only on vector momenta is extended to three-nucleon scattering. Starting from the spin-momentum dependence occurring as scalar products in two- and three-nucleon forces together with other scalar functions, we present the Faddeev multiple scattering series in which order by order the spin-degrees can be treated analytically leading to 3D integrations over scalar functions depending on momentum vectors only. Such formulation is especially important in view of awaiting extension of 3N Faddeev calculations to projectile energies above the pion production threshold and applications of chiral perturbation theory 3N forces, which are to be most efficiently treated directly in such three-dimensional formulation without having to expand these forces into a partial wave basis.
Nonlinear elasticity in rocks: A comprehensive three-dimensional description
Lott, Martin; Remillieux, Marcel C.; Garnier, Vincent; Le Bas, Pierre-Yves; Ulrich, T. J.; Payan, Cédric
2017-07-01
We study theoretically and experimentally the mechanisms of nonlinear and nonequilibrium dynamics in geomaterials through dynamic acoustoelasticity testing. In the proposed theoretical formulation, the classical theory of nonlinear elasticity is extended to include the effects of conditioning. This formulation is adapted to the context of dynamic acoustoelasticity testing in which a low-frequency "pump" wave induces a strain field in the sample and modulates the propagation of a high-frequency "probe" wave. Experiments are conducted to validate the formulation in a long thin bar of Berea sandstone. Several configurations of the pump and probe are examined: the pump successively consists of the first longitudinal and first torsional mode of vibration of the sample while the probe is successively based on (pressure) P and (shear) S waves. The theoretical predictions reproduce many features of the elastic response observed experimentally, in particular, the coupling between nonlinear and nonequilibrium dynamics and the three-dimensional effects resulting from the tensorial nature of elasticity.
Three-dimensional micro- and nanometre composite aluminium patterns
Institute of Scientific and Technical Information of China (English)
Zhao Xiao-Wei; Zhang Zeng-Xing; Xiang Yan-Juan; Zhou Wei-Ya; Wang Gang; Jiang Peng; Gao Yan; Wang Jian-Xiong; Song Li; Liu Dong-Fang; Liu Li-Feng; Dou Xin-Yuan; Luo Shu-Dong
2005-01-01
Three-dimensional micro- and nanometre composite aluminium patterns are constructed on Al substrate by using photolithography, reactive ion etching and anodization. A layer of patterned SiO2 mask is introduced as resist on the surface of Al foil, and during anodization the tilted nanopores and remaining Al microstructure are formed underneath the SiO2 mask. The existence of SiO2 mask leads to the deflection of electric field and effect on the transportation of ions, which results in the formation of laterally tilted nanopores, while the nanopores go down directly when being far from the boundaries of SiO2. The vertical and lateral anodization processes proceeding simultaneously construct the Al microstructure under the patterned SiO2 mask.
Secure three-dimensional data transmission and display.
Matoba, Osamu; Javidi, Bahram
2004-04-10
An optical three-dimensional (3D) display system interfaced with digital data transmission is proposed. In this system, an original 3D object is encrypted by use of a random phase mask and then the encrypted pattern is recorded as a digital hologram. The digital hologram key is also recorded for optical decryption. Both the encrypted digital hologram and the digital hologram key are transmitted to a receiver through a conventional communication data channel. At the receiver, the 3D scene is reconstructed and displayed optically in a retrieval system based on a joint-transform correlation. Experimental results are presented. We investigate the influence of quantization of the joint power spectrum in the optical correlator on the quality of the reconstructed image.
Phonon band structures of the three dimensional latticed pentamode metamaterials
Directory of Open Access Journals (Sweden)
Guan Wang
2017-02-01
Full Text Available The artificially designed three-dimensional (3D pentamode metamaterials have such an extraordinary characteristic that the solid materials behave like liquids. Meanwhile, the ideal structure of the pentamode metamaterials arranges in the same way as that of the diamond crystals. In the present research, we regard three types of pentamode metamaterials derived from the 3D crystal lattices as research objects. The phonon band structures of the candidate pentamode structures are calculated by using the finite element method (FEM. We illustrate the relation between the ratio of the bulk modulus B and the shear modulus G of different combinations of D and d. Finally, we find out the relationship between the phonon band structure and the structure parameters. It is useful for generating the phonon band structure and controlling elastic wave propagation.
Architecture and Applications of Functional Three-Dimensional Graphene Networks
DEFF Research Database (Denmark)
Dey, Ramendra Sundar; Chi, Qijin
2015-01-01
building blocksfor the bottom-up architecture of various graphene based nanomaterials. Th eassembly of functionalized GNS into three-dimensional (3D) porous graphenenetworks represents a novel approach. Resulting 3D porous graphene materialsposses unique physicochemical properties such as large surface......As the fi rst atomic-thick two-dimensional crystalline material, graphene has continuouslycreated a wonder land in materials science within the past decade. Anumber of methods have been developed for preparation and functionalizationof single-layered graphene nanosheets (GNS), which are essential...... areas, goodconductivity and mechanical strength, high thermal stability and desirable fl exibility,which altogether makes this new type of porous materials be highly attractivefor a wide range of applications. In this chapter, we will cover some crucialaspects of porous graphene networked materials...
Modeling three-dimensional morphological structures using spherical harmonics.
Shen, Li; Farid, Hany; McPeek, Mark A
2009-04-01
Quantifying morphological shape is a fundamental issue in evolutionary biology. Recent technological advances (e.g., confocal microscopy, laser scanning, computer tomography) have made the capture of detailed three-dimensional (3D) morphological structure easy and cost-effective. In this article, we develop a 3D analytic framework (SPHARM-spherical harmonics) for modeling the shapes of complex morphological structures from continuous surface maps that can be produced by these technologies. Because the traditional SPHARM methodology has limitations in several of its processing steps, we present new algorithms for two SPHARM processing steps: spherical parameterization and SPHARM registration. These new algorithms allow for the numerical characterization of a much larger class of 3D models. We demonstrate the effectiveness of the method by applying it to modeling the cerci of Enallagma damselflies.
Three-dimensional characterization of stress corrosion cracks
Energy Technology Data Exchange (ETDEWEB)
Lozano-Perez, S., E-mail: sergio.lozano-perez@materials.ox.ac.u [University of Oxford, Department of Materials, Parks Road, Oxford OX1 3PH (United Kingdom); Rodrigo, P. [Universidad Rey Juan Carlos, Dpto. de Ciencia e Ingenieria de Materiales, c/ Tulipan s.n., 28933 Mostoles (Madrid) (Spain); Gontard, Lionel C. [Danish Technical University, Center for Electron Nanoscopy, Matematiktorvet Building 307, Room 115, 2800 Kogens Lyngby (Denmark)
2011-01-31
Understanding crack propagation and initiation is fundamental if stress corrosion cracking (SCC) mechanisms are to be understood. However, cracking is a three-dimensional (3D) phenomenon and most characterization techniques are restricted to two-dimensional (2D) observations. In order to overcome this problem, different approaches to extract 3D information have been used in the recent years. In this work we will present the benefits of using 3D focused ion beam (FIB) slicing and electron tomography. 3D FIB slicing offers a fast and high throughput characterization while electron tomography offers the best spatial resolution. To illustrate the power of these techniques, different parts of dominant stress corrosion cracks in Ni-alloys and stainless steels have been reconstructed in 3D. All relevant microstructural features can now be studied in detail and its relative orientation respect to the strain direction and grain boundary plane accurately measured.
IRIS: A Generic Three-Dimensional Radiative Transfer Code
Ibgui, L; Lanz, T; Stehlé, C
2012-01-01
We present IRIS, a new generic three-dimensional (3D) spectral radiative transfer code that generates synthetic spectra, or images. It can be used as a diagnostic tool for comparison with astrophysical observations or laboratory astrophysics experiments. We have developed a 3D short-characteristic solver that works with a 3D nonuniform Cartesian grid. We have implemented a piecewise cubic, locally monotonic, interpolation technique that dramatically reduces the numerical diffusion effect. The code takes into account the velocity gradient effect resulting in gradual Doppler shifts of photon frequencies and subsequent alterations of spectral line profiles. It can also handle periodic boundary conditions. This first version of the code assumes Local Thermodynamic Equilibrium (LTE) and no scattering. The opacities and source functions are specified by the user. In the near future, the capabilities of IRIS will be extended to allow for non-LTE and scattering modeling. IRIS has been validated through a number of te...
Microfabrication of three-dimensional filters for liposome extrusion
Baldacchini, Tommaso; Nuñez, Vicente; LaFratta, Christopher N.; Grech, Joseph S.; Vullev, Valentine I.; Zadoyan, Ruben
2015-03-01
Liposomes play a relevant role in the biomedical field of drug delivery. The ability of these lipid vesicles to encapsulate and transport a variety of bioactive molecules has fostered their use in several therapeutic applications, from cancer treatments to the administration of drugs with antiviral activities. Size and uniformity are key parameters to take into consideration when preparing liposomes; these factors greatly influence their effectiveness in both in vitro and in vivo experiments. A popular technique employed to achieve the optimal liposome dimension (around 100 nm in diameter) and uniform size distribution is repetitive extrusion through a polycarbonate filter. We investigated two femtosecond laser direct writing techniques for the fabrication of three-dimensional filters within a microfluidics chip for liposomes extrusion. The miniaturization of the extrusion process in a microfluidic system is the first step toward a complete solution for lab-on-a-chip preparation of liposomes from vesicles self-assembly to optical characterization.
Three-dimensional periodic dielectric structures having photonic Dirac points
Energy Technology Data Exchange (ETDEWEB)
Bravo-Abad, Jorge; Joannopoulos, John D.; Soljacic, Marin
2015-06-02
The dielectric, three-dimensional photonic materials disclosed herein feature Dirac-like dispersion in quasi-two-dimensional systems. Embodiments include a face-centered cubic (fcc) structure formed by alternating layers of dielectric rods and dielectric slabs patterned with holes on respective triangular lattices. This fcc structure also includes a defect layer, which may comprise either dielectric rods or a dielectric slab with patterned with holes. This defect layer introduces Dirac cone dispersion into the fcc structure's photonic band structure. Examples of these fcc structures enable enhancement of the spontaneous emission coupling efficiency (the .beta.-factor) over large areas, contrary to the conventional wisdom that the .beta.-factor degrades as the system's size increases. These results enable large-area, low-threshold lasers; single-photon sources; quantum information processing devices; and energy harvesting systems.
Three-dimensional computed tomography of the acetabulum
Energy Technology Data Exchange (ETDEWEB)
Pozzi Mucelli, R.S.; Muner, G.; Pozzi Mucelli, F.; Pozzi Mucelli, M.; Marotti, F.; Dalla Palma, L.
1986-08-01
Acetabular fractures represent a complex variety that are classified in different types. Conventional radiology is often inadequate to demonstrate and classify the fractures. Computed tomography (CT) has already been shown to be superior in this field. A further advantage of CT is represented by the recent availability of three-dimensional (3D) images that are realized from axial CT scans by means of a new software. The Authors report the applications of this new software to the study of the normal acetabulum and in patients with fractures. 3D images allows an effective demonstration of the fracture, its irradiation and the dislocation of bone fragments. The information is contained in one or few images rather than many axial images. Therefore the role of 3D images may be considered complementary to axial CT scans.
Three-dimensional numerical simulation during laser processing of CFRP
Ohkubo, Tomomasa; Sato, Yuji; Matsunaga, Ei-ichi; Tsukamoto, Masahiro
2017-09-01
We performed three-dimensional numerical simulation about laser processing of carbon-fiber-reinforced plastic (CFRP) using OpenFOAM as libraries of finite volume method (FVM). Although a little theoretical or numerical studies about heat affected zone (HAZ) formation were performed, there is no research discussing how HAZ is generated considering time development about removal of each material. It is important to understand difference of removal speed of carbon fiber and resin in order to improve quality of cut surface of CFRP. We demonstrated how the carbon fiber and resin are removed by heat of ablation plume by our simulation. We found that carbon fiber is removed faster than resin at first stage because of the difference of thermal conductivity, and after that, the resin is removed faster because of its low combustion temperature. This result suggests the existence of optimal contacting time of the laser ablation and kerf of the target.
Three dimensional MOF-sponge for fast dynamic adsorption.
Li, Huizeng; Li, Mingzhu; Li, Wenbo; Yang, Qiang; Li, Yanan; Gu, Zhenkun; Song, Yanlin
2017-02-22
Nowadays, environmental pollution is a big problem. Metal organic frameworks (MOFs) provide a novel strategy for exhaust gases adsorption and toxic pollutants removal. We proposed a facile and versatile method to prepare a highly efficient three dimensional MOF-sponge by coating MOF crystals on polyurethane sponge surface, mimicking the porous structure of the marine animal, sponge. Owing to combination of the spatial structure of the commercial sponge and the excellent adsorption capacity of MOF coatings, the MOF-sponge possessed good permeability and high dynamic adsorption capacity. Dynamic adsorption ability of the prepared Cu3(BTC)2-sponge was demonstrated by flowing gas-mixtures of NH3/N2 and an aquatic solution of Rhodamine B through it, with a capacity of 101.6 mg g(-1) and 8.8 mg g(-1) for NH3 and Rhodamine B, respectively.
A New Three-Dimensional Track Fit with Multiple Scattering
Berger, Niklaus; Kozlinskiy, Alexandr; Schöning, Andre
2016-01-01
Modern semiconductor detectors allow for charged particle tracking with ever increasing position resolution. Due to the reduction of the spatial hit uncertainties, multiple Coulomb scattering in the detector layers becomes the dominant source for tracking uncertainties. In this case long range correlations can be ignored, and the track fit can consequently be formulated as a sum of independent fits to hit triplets. In this paper we present an analytical solution for a three-dimensional triplet(s) fit in a homogeneous magnetic field based on a multiple scattering model. Track fitting of hit triplets is performed using a linearization ansatz. The momentum resolution is discussed for a typical spectrometer setup. Furthermore the track fit is compared with other track fits for two different pixel detector geometries, namely the Mu3e experiment at PSI and a typical high-energy collider experiment. For a large momentum range the triplets fit provides a significant better performance than a single helix fit. The tri...
Persistent currents in three-dimensional shell-doped nanorings
Institute of Scientific and Technical Information of China (English)
Xu Ning; Ding Jian-Wen; Chen Hong-Bo; Ma Ming-Ming
2009-01-01
The persistent current in three-dimensional (P×N2) nanorings as a function of the unit cell number (P), the channel number (M = N2), surface disorder (ξ), and temperature (T) is theoretically investigated in terms of rotational symmetry. On the whole, the typical current increases linearly with (<3) but decreases exponentially with P, while wide fluctuations exist therein. In the presence of surface disorder, the persistent current decreases with ξ in the regime of weak disorder but increases in the regime of strong disorder. In addition, it is found that the persistent current in perfect rings decreases exponentially with temperature even at T < T*, while in most disorder rings, the typical current decreases slightly with temperature at T < T*.
Three-dimensional optical tomography of the premature infant brain
Energy Technology Data Exchange (ETDEWEB)
Hebden, Jeremy C [Department of Medical Physics and Bioengineering, University College London, 11-20 Capper Street, London (United Kingdom); Gibson, Adam [Department of Medical Physics and Bioengineering, University College London, 11-20 Capper Street, London (United Kingdom); Yusof, Rozarina Md [Department of Medical Physics and Bioengineering, University College London, 11-20 Capper Street, London (United Kingdom); Everdell, Nick [Department of Medical Physics and Bioengineering, University College London, 11-20 Capper Street, London (United Kingdom); Hillman, Elizabeth M C [Department of Medical Physics and Bioengineering, University College London, 11-20 Capper Street, London (United Kingdom); Delpy, David T [Department of Medical Physics and Bioengineering, University College London, 11-20 Capper Street, London (United Kingdom); Arridge, Simon R [Department of Computer Science, University College London, Gower Street, London (United Kingdom); Austin, Topun [Department of Paediatrics and Child Health, University College London, 5 University Street, London (United Kingdom); Meek, Judith H [Department of Paediatrics and Child Health, University College London, 5 University Street, London (United Kingdom); Wyatt, John S [Department of Paediatrics and Child Health, University College London, 5 University Street, London (United Kingdom)
2002-12-07
For the first time, three-dimensional images of the newborn infant brain have been generated using measurements of transmitted light. A 32-channel time-resolved imaging system was employed, and data were acquired using custom-made helmets which couple source fibres and detector bundles to the infant head. Images have been reconstructed using measurements of mean flight time relative to those acquired on a homogeneous reference phantom, and using a head-shaped 3D finite-element-based forward model with an external boundary constrained to match the measured positions of the sources and detectors. Results are presented for a premature infant with a cerebral haemorrhage predominantly located within the left ventricle. Images representing the distribution of absorption at 780 nm and 815 nm reveal an asymmetry consistent with the haemorrhage, and corresponding maps of blood volume and fractional oxygen saturation are generally within expected physiological values.
Three-dimensional fracture simulations based on the SDA
Feist, C.; Hofstetter, G.
2007-02-01
A numerical model within the framework of a non-symmetric strong discontinuity approach (SDA) suitable for fracture simulations of plain concrete is presented. The model is based on the fixed crack concept and is formulated within the framework of elements with embedded discontinuities. Discontinuity segments of individual elements are considered to form a C0-continuous surface. Enforcement of continuity of the crack surface across adjacent elements is established by the so-called partial domain crack tracking algorithm (PDTA). Orientation of individual crack segments is derived from a non-local strain field. Within the present work emphasis is put on the formulation for the three-dimensional case. The implications on the respective algorithms are highlighted. The capabilities of the model are shown by means of numerical examples. Copyright
Three-Dimensional Genome Organization and Function in Drosophila
Schwartz, Yuri B.; Cavalli, Giacomo
2017-01-01
Understanding how the metazoan genome is used during development and cell differentiation is one of the major challenges in the postgenomic era. Early studies in Drosophila suggested that three-dimensional (3D) chromosome organization plays important regulatory roles in this process and recent technological advances started to reveal connections at the molecular level. Here we will consider general features of the architectural organization of the Drosophila genome, providing historical perspective and insights from recent work. We will compare the linear and spatial segmentation of the fly genome and focus on the two key regulators of genome architecture: insulator components and Polycomb group proteins. With its unique set of genetic tools and a compact, well annotated genome, Drosophila is poised to remain a model system of choice for rapid progress in understanding principles of genome organization and to serve as a proving ground for development of 3D genome-engineering techniques. PMID:28049701
Three-Dimensional Structural Aspects of Protein–Polysaccharide Interactions
Directory of Open Access Journals (Sweden)
Masamichi Nagae
2014-03-01
Full Text Available Linear polysaccharides are typically composed of repeating mono- or disaccharide units and are ubiquitous among living organisms. Polysaccharide diversity arises from chain-length variation, branching, and additional modifications. Structural diversity is associated with various physiological functions, which are often regulated by cognate polysaccharide-binding proteins. Proteins that interact with linear polysaccharides have been identified or developed, such as galectins and polysaccharide-specific antibodies, respectively. Currently, data is accumulating on the three-dimensional structure of polysaccharide-binding proteins. These proteins are classified into two types: exo-type and endo-type. The former group specifically interacts with the terminal units of polysaccharides, whereas the latter with internal units. In this review, we describe the structural aspects of exo-type and endo-type protein-polysaccharide interactions. Further, we discuss the structural basis for affinity and specificity enhancement in the face of inherently weak binding interactions.
Ideal three-dimensional electrode structures for electrochemical energy storage.
Chabi, Sakineh; Peng, Chuang; Hu, Di; Zhu, Yanqiu
2014-04-16
Three-dimensional electrodes offer great advantages, such as enhanced ion and electron transport, increased material loading per unit substrate area, and improved mechanical stability upon repeated charge-discharge. The origin of these advantages is discussed and the criteria for ideal 3D electrode structure are outlined. One of the common features of ideal 3D electrodes is the use of a 3D carbon- or metal-based porous framework as the structural backbone and current collector. The synthesis methods of these 3D frameworks and their composites with redox-active materials are summarized, including transition metal oxides and conducting polymers. The structural characteristics and electrochemical performances are also reviewed. Synthesis of composite 3D electrodes is divided into two types - template-assisted and template-free methods - depending on whether a pre-made template is required. The advantages and drawbacks of both strategies are discussed.
Scale invariance of parity-invariant three-dimensional QED
Karthik, Nikhil; Narayanan, Rajamani
2016-09-01
We present numerical evidences using overlap fermions for a scale-invariant behavior of parity-invariant three-dimensional QED with two flavors of massless two-component fermions. Using finite-size scaling of the low-lying eigenvalues of the massless anti-Hermitian overlap Dirac operator, we rule out the presence of a bilinear condensate and estimate the mass anomalous dimension. The eigenvectors associated with these low-lying eigenvalues suggest critical behavior in the sense of a metal-insulator transition. We show that there is no mass gap in the scalar and vector correlators in the infinite-volume theory. The vector correlator does not acquire an anomalous dimension. The anomalous dimension associated with the long-distance behavior of the scalar correlator is consistent with the mass anomalous dimension.
Three dimensional dynamic mode decomposition of premixed turbulent jet flames
Grenga, Temistocle; Macart, Jonathan; Mueller, Michael
2016-11-01
Analysis of turbulent combustion DNS data largely focuses on statistical analyses. However, turbulent combustion is highly unsteady and dynamic. In this work, Dynamic Mode Decomposition (DMD) will be explored as a tool for dynamic analysis of turbulent combustion DNS data, specifically a series of low Mach number spatially-evolving turbulent planar premixed hydrogen/air jet flames. DMD decomposes data into coherent modes with corresponding growth rates and oscillatory frequencies. The method identifies structures unbiased by energy so is particularly well suited to exploring dynamic processes at scales smaller than the largest, energy-containing scales of the flow and that may not be co-located in space and time. The focus of this work will be on both the physical insights that can potentially be derived from DMD modes and the computational issues associated with applying DMD to large three-dimensional DNS datasets.
Magnetotransport properties of three-dimensional Weyl semimetals
Ramakrishnan, Navneeth; Milletari, Mirco; Adam, Shaffique
2015-03-01
We investigate theoretically the transport and magnetotransport properties of three-dimensional Weyl semimetals. We consider the RPA-Boltzmann transport theory relevant for weakly interacting electrons scattering off randomly distributed charged impurities, and employ an effective medium theory to average over the resulting spatially inhomogeneous carrier density profile. Our formalism allows us to smoothly connect results for the minimum conductivity near the Dirac point with known results for the conductivity at high carrier density. In the presence of a non-quantizing magnetic field, we predict that the magnetoresistance shows a transition from quadratic at low magnetic fields to linear at higher fields. In addition, our formalism can qualitatively explain some recent unexpected experimental results on the mixed-chalcogenide compound TlBiSSe. This work is supported by the Singapore National Research Foundation NRF-NRFF2012-01. Singapore National Research Foundation NRF-NRFF2012-01.
Three-dimensional morphology of the human embryonic brain
Directory of Open Access Journals (Sweden)
N. Shiraishi
2015-09-01
Full Text Available The morphogenesis of the cerebral vesicles and ventricles was visualized in 3D movies using images derived from human embryo specimens between Carnegie stage 13 and 23 from the Kyoto Collection. These images were acquired with a magnetic resonance microscope equipped with a 2.35-T superconducting magnet. Three-dimensional images using the same scale demonstrated brain development and growth effectively. The non-uniform thickness of the brain tissue, which may indicate brain differentiation, was visualized with thickness-based surface color mapping. A closer view was obtained of the unique and complicated differentiation of the rhombencephalon, especially with regard to the internal view and thickening of the brain tissue. The present data contribute to a better understanding of brain and cerebral ventricle development.
Three-dimensional cell culture models for investigating human viruses.
He, Bing; Chen, Guomin; Zeng, Yi
2016-10-01
Three-dimensional (3D) culture models are physiologically relevant, as they provide reproducible results, experimental flexibility and can be adapted for high-throughput experiments. Moreover, these models bridge the gap between traditional two-dimensional (2D) monolayer cultures and animal models. 3D culture systems have significantly advanced basic cell science and tissue engineering, especially in the fields of cell biology and physiology, stem cell research, regenerative medicine, cancer research, drug discovery, and gene and protein expression studies. In addition, 3D models can provide unique insight into bacteriology, virology, parasitology and host-pathogen interactions. This review summarizes and analyzes recent progress in human virological research with 3D cell culture models. We discuss viral growth, replication, proliferation, infection, virus-host interactions and antiviral drugs in 3D culture models.
Three dimensional view of the SYK/AdS duality
Das, Sumit R.; Jevicki, Antal; Suzuki, Kenta
2017-09-01
We show that the spectrum of the SYK model can be interpreted as that of a 3D scalar coupled to gravity. The scalar has a mass which is at the Breitenholer-Freedman bound of AdS2, and subject to a delta function potential at the center of the interval along the third direction. This, through Kaluza-Klein procedure on AdS2 × ( S 1) /Z 2, generates the spectrum reproducing the bi-local propagator at strong coupling. Furthermore, the leading 1 /J correction calculated in this picture reproduces the known correction to the poles of the SYK propagator, providing credence to a conjecture that the bulk dual of this model can be interpreted as a three dimensional theory.
Hamiltonian thermodynamics of three-dimensional dilatonic black hole
Dias, Gonçalo A S
2008-01-01
The action for a class of three-dimensional dilaton-gravity theories with a cosmological constant can be recast in a Brans-Dicke type action, with its free $\\omega$ parameter. These theories have static spherically symmetric black holes. Those with well formulated asymptotics are studied through a Hamiltonian formalism, and their thermodynamical properties are found out. The theories studied are general relativity ($\\omega\\to\\infty$), a dimensionally reduced cylindrical four-dimensional general relativity theory ($\\omega=0$), and a theory representing a class of theories ($\\omega=-3$). The Hamiltonian formalism is setup in three dimensions through foliations on the right region of the Carter-Penrose diagram, with the bifurcation 1-sphere as the left boundary, and anti-de Sitter infinity as the right boundary. The metric functions on the foliated hypersurfaces are the canonical coordinates. The Hamiltonian action is written, the Hamiltonian being a sum of constraints. One finds a new action which yields an unc...