WorldWideScience

Sample records for survey methodology design

  1. Methodological design of the National Health and Nutrition Survey 2016

    OpenAIRE

    Martín Romero-Martínez; Teresa Shamah-Levy; Lucia Cuevas-Nasu; Ignacio Méndez Gómez-Humarán; Elsa Berenice Gaona-Pineda; Luz María Gómez-Acosta; Juan Ángel Rivera-Dommarco; Mauricio Hernández-Ávila

    2017-01-01

    Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organizat...

  2. [Methodological design of the National Health and Nutrition Survey 2016].

    Science.gov (United States)

    Romero-Martínez, Martín; Shamah-Levy, Teresa; Cuevas-Nasu, Lucía; Gómez-Humarán, Ignacio Méndez; Gaona-Pineda, Elsa Berenice; Gómez-Acosta, Luz María; Rivera-Dommarco, Juan Ángel; Hernández-Ávila, Mauricio

    2017-01-01

    Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. The Ensanut-MC is a national probabilistic survey whose objective population are the inhabitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on overweight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

  3. Methodological design of the National Health and Nutrition Survey 2016

    Directory of Open Access Journals (Sweden)

    Martín Romero-Martínez

    2017-05-01

    Full Text Available Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. Results. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. Conclusions. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on over­weight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

  4. Web survey methodology

    CERN Document Server

    Callegaro, Mario; Vehovar, Asja

    2015-01-01

    Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

  5. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...... Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers....

  6. Alcohol mixed with energy drinks: methodology and design of the Utrecht Student Survey

    Directory of Open Access Journals (Sweden)

    de Haan L

    2012-10-01

    Full Text Available Lydia de Haan,1 Hein A de Haan,2,3 Berend Olivier,1 Joris C Verster11Utrecht University, Utrecht Institute for Pharmaceutical Sciences, Division of Pharmacology, Utrecht, The Netherlands; 2Tactus Addiction Treatment, Deventer, The Netherlands; 3Nijmegen Institute for Scientist-Practitioners in Addiction, Nijmegen, The NetherlandsAbstract: This paper describes the methodology of the Utrecht Student Survey. This online survey was conducted in June 2011 by 6002 students living in Utrecht, The Netherlands. The aim of the survey was to determine the potential impact of mixing alcoholic beverages with energy drinks on overall alcohol consumption and alcohol-related consequences. In contrast to most previous surveys conducted on this topic, the current survey used a more appropriate within-subject design, comparing the alcohol consumption of individuals who consume alcohol mixed with energy drinks on occasions. Specifically, a comparison was conducted to examine the occasions during which these individuals consume this mixture versus occasions during which they consume alcohol alone. In addition to energy drinks, the consumption of other non-alcoholic mixers was also assessed when combined with alcoholic beverages. Furthermore, the reasons for consuming energy drinks alone or in combination with alcohol were investigated, and were compared to reasons for mixing alcohol with other non-alcoholic beverages. Finally, personality characteristics and the level of risk-taking behavior among the individuals were also assessed to explore their relationship with alcohol consumption. The Utrecht Student Survey will be replicated in the USA, Australia, and the UK. Results will be pooled, but also examined for possible cross-cultural differences.Keywords: energy drink, alcohol, alcohol related consequences, survey, methodology

  7. Alcohol mixed with energy drinks: methodology and design of the Utrecht Student Survey.

    Science.gov (United States)

    de Haan, Lydia; de Haan, Hein A; Olivier, Berend; Verster, Joris C

    2012-01-01

    This paper describes the methodology of the Utrecht Student Survey. This online survey was conducted in June 2011 by 6002 students living in Utrecht, The Netherlands. The aim of the survey was to determine the potential impact of mixing alcoholic beverages with energy drinks on overall alcohol consumption and alcohol-related consequences. In contrast to most previous surveys conducted on this topic, the current survey used a more appropriate within-subject design, comparing the alcohol consumption of individuals who consume alcohol mixed with energy drinks on occasions. Specifically, a comparison was conducted to examine the occasions during which these individuals consume this mixture versus occasions during which they consume alcohol alone. In addition to energy drinks, the consumption of other non-alcoholic mixers was also assessed when combined with alcoholic beverages. Furthermore, the reasons for consuming energy drinks alone or in combination with alcohol were investigated, and were compared to reasons for mixing alcohol with other non-alcoholic beverages. Finally, personality characteristics and the level of risk-taking behavior among the individuals were also assessed to explore their relationship with alcohol consumption. The Utrecht Student Survey will be replicated in the USA, Australia, and the UK. Results will be pooled, but also examined for possible cross-cultural differences.

  8. Alcohol mixed with energy drinks: methodology and design of the Utrecht Student Survey

    OpenAIRE

    de Haan, Lydia; de Haan, Hein A; Olivier, Berend; Verster, Joris C

    2012-01-01

    Lydia de Haan,1 Hein A de Haan,2,3 Berend Olivier,1 Joris C Verster11Utrecht University, Utrecht Institute for Pharmaceutical Sciences, Division of Pharmacology, Utrecht, The Netherlands; 2Tactus Addiction Treatment, Deventer, The Netherlands; 3Nijmegen Institute for Scientist-Practitioners in Addiction, Nijmegen, The NetherlandsAbstract: This paper describes the methodology of the Utrecht Student Survey. This online survey was conducted in June 2011 by 6002 students living in Utrecht, The Ne...

  9. Design methodology of Dutch banknotes

    Science.gov (United States)

    de Heij, Hans A. M.

    2000-04-01

    Since the introduction of a design methodology for Dutch banknotes, the quality of Dutch paper currency has improved in more than one way. The methodology is question provides for (i) a design policy, which helps fix clear objectives; (ii) design management, to ensure a smooth cooperation between the graphic designer, printer, papermaker an central bank, (iii) a program of requirements, a banknote development guideline for all parties involved. This systematic approach enables an objective selection of design proposals, including security features. Furthermore, the project manager obtains regular feedback from the public by conducting market surveys. Each new design of a Netherlands Guilder banknote issued by the Nederlandsche Bank of the past 50 years has been an improvement on its predecessor in terms of value recognition, security and durability.

  10. Risk analysis methodology survey

    Science.gov (United States)

    Batson, Robert G.

    1987-01-01

    NASA regulations require that formal risk analysis be performed on a program at each of several milestones as it moves toward full-scale development. Program risk analysis is discussed as a systems analysis approach, an iterative process (identification, assessment, management), and a collection of techniques. These techniques, which range from simple to complex network-based simulation were surveyed. A Program Risk Analysis Handbook was prepared in order to provide both analyst and manager with a guide for selection of the most appropriate technique.

  11. Methodological survey of designed uneven randomization trials (DU-RANDOM): a protocol.

    Science.gov (United States)

    Wu, Darong; Akl, Elie A; Guyatt, Gordon H; Devereaux, Philip J; Brignardello-Petersen, Romina; Prediger, Barbara; Patel, Krupesh; Patel, Namrata; Lu, Taoying; Zhang, Yuan; Falavigna, Maicon; Santesso, Nancy; Mustafa, Reem A; Zhou, Qi; Briel, Matthias; Schünemann, Holger J

    2014-01-23

    Although even randomization (that is, approximately 1:1 randomization ratio in study arms) provides the greatest statistical power, designed uneven randomization (DUR), (for example, 1:2 or 1:3) is used to increase participation rates. Until now, no convincing data exists addressing the impact of DUR on participation rates in trials. The objective of this study is to evaluate the epidemiology and to explore factors associated with DUR. We will search for reports of RCTs published within two years in 25 general medical journals with the highest impact factor according to the Journal Citation Report (JCR)-2010. Teams of two reviewers will determine eligibility and extract relevant information from eligible RCTs in duplicate and using standardized forms. We will report the prevalence of DUR trials, the reported reasons for using DUR, and perform a linear regression analysis to estimate the association between the randomization ratio and the associated factors, including participation rate, type of informed consent, clinical area, and so on. A clearer understanding of RCTs with DUR and its association with factors in trials, for example, participation rate, can optimize trial design and may have important implications for both researchers and users of the medical literature.

  12. Mode Equivalence of Health Indicators Between Data Collection Modes and Mixed-Mode Survey Designs in Population-Based Health Interview Surveys for Children and Adolescents: Methodological Study.

    Science.gov (United States)

    Mauz, Elvira; Hoffmann, Robert; Houben, Robin; Krause, Laura; Kamtsiuris, Panagiotis; Gößwald, Antje

    2018-03-05

    The implementation of an Internet option in an existing public health interview survey using a mixed-mode design is attractive because of lower costs and faster data availability. Additionally, mixed-mode surveys can increase response rates and improve sample composition. However, mixed-mode designs can increase the risk of measurement error (mode effects). This study aimed to determine whether the prevalence rates or mean values of self- and parent-reported health indicators for children and adolescents aged 0-17 years differ between self-administered paper-based questionnaires (SAQ-paper) and self-administered Web-based questionnaires (SAQ-Web), as well as between a single-mode control group and different mixed-mode groups. Data were collected for a methodological pilot of the third wave of the "German Health Interview and Examination Survey for Children and Adolescents". Questionnaires were completed by parents or adolescents. A population-based sample of 11,140 children and adolescents aged 0-17 years was randomly allocated to 4 survey designs-a single-mode control group with paper-and-pencil questionnaires only (n=970 parents, n=343 adolescents)-and 3 mixed-mode designs, all of which offered Web-based questionnaire options. In the concurrent mixed-mode design, both questionnaires were offered at the same time (n=946 parents, n=290 adolescents); in the sequential mixed-mode design, the SAQ-Web was sent first, followed by the paper questionnaire along with a reminder (n=854 parents, n=269 adolescents); and in the preselect mixed-mode design, both options were offered and the respondents were asked to request the desired type of questionnaire (n=698 parents, n=292 adolescents). In total, 3468 questionnaires of parents of children aged 0-17 years (SAQ-Web: n=708; SAQ-paper: n=2760) and 1194 questionnaires of adolescents aged 11-17 years (SAQ-Web: n=299; SAQ-paper: n=895) were analyzed. Sociodemographic characteristics and a broad range of health indicators for

  13. Design and methodology of a mixed methods follow-up study to the 2014 Ghana Demographic and Health Survey.

    Science.gov (United States)

    Staveteig, Sarah; Aryeetey, Richmond; Anie-Ansah, Michael; Ahiadeke, Clement; Ortiz, Ladys

    2017-01-01

    The intended meaning behind responses to standard questions posed in large-scale health surveys are not always well understood. Systematic follow-up studies, particularly those which pose a few repeated questions followed by open-ended discussions, are well positioned to gauge stability and consistency of data and to shed light on the intended meaning behind survey responses. Such follow-up studies require extensive coordination and face challenges in protecting respondent confidentiality during the process of recontacting and reinterviewing participants. We describe practical field strategies for undertaking a mixed methods follow-up study during a large-scale health survey. The study was designed as a mixed methods follow-up study embedded within the 2014 Ghana Demographic and Health Survey (GDHS). The study was implemented in 13 clusters. Android tablets were used to import reference data from the parent survey and to administer the questionnaire, which asked a mixture of closed- and open-ended questions on reproductive intentions, decision-making, and family planning. Despite a number of obstacles related to recontacting respondents and concern about respondent fatigue, over 92 percent of the selected sub-sample were successfully recontacted and reinterviewed; all consented to audio recording. A confidential linkage between GDHS data, follow-up tablet data, and audio transcripts was successfully created for the purpose of analysis. We summarize the challenges in follow-up study design, including ethical considerations, sample size, auditing, filtering, successful use of tablets, and share lessons learned for future such follow-up surveys.

  14. Systems engineering agile design methodologies

    CERN Document Server

    Crowder, James A

    2013-01-01

    This book examines the paradigm of the engineering design process. The authors discuss agile systems and engineering design. The book captures the entire design process (functionbases), context, and requirements to affect real reuse. It provides a methodology for an engineering design process foundation for modern and future systems design. This book captures design patterns with context for actual Systems Engineering Design Reuse and contains a new paradigm in Design Knowledge Management.

  15. Permanent magnet design methodology

    Science.gov (United States)

    Leupold, Herbert A.

    1991-01-01

    Design techniques developed for the exploitation of high energy magnetically rigid materials such as Sm-Co and Nd-Fe-B have resulted in a revolution in kind rather than in degree in the design of a variety of electron guidance structures for ballistic and aerospace applications. Salient examples are listed. Several prototype models were developed. These structures are discussed in some detail: permanent magnet solenoids, transverse field sources, periodic structures, and very high field structures.

  16. Electric drive design methodology

    CERN Document Server

    Jufer, Marcel

    2013-01-01

    An electric drive that is designed or adapted to a specific application must take into account all the elements of the chain of constituent elements in its use and deployment. In addition to the motor, the transmission, power electronics, control, sensors, and electrical protection systems must be taken into account. The motor and the transmission can be optimized and designed to obtain the best energy efficiency assessment, in particular for dynamic nodes. An inventory and a characterization of these various components is proposed as part of this book's examination and explanation

  17. Solid lubrication design methodology

    Science.gov (United States)

    Aggarwal, B. B.; Yonushonis, T. M.; Bovenkerk, R. L.

    1984-01-01

    A single element traction rig was used to measure the traction forces at the contact of a ball against a flat disc at room temperature under combined rolling and sliding. The load and speed conditions were selected to match those anticipated for bearing applications in adiabatic diesel engines. The test program showed that the magnitude of traction forces were almost the same for all the lubricants tested; a lubricant should, therefore, be selected on the basis of its ability to prevent wear of the contact surfaces. Traction vs. slide/roll ratio curves were similar to those for liquid lubricants but the traction forces were an order of magnitude higher. The test data was used to derive equations to predict traction force as a function of contact stress and rolling speed. Qualitative design guidelines for solid lubricated concentrated contacts are proposed.

  18. Unattended Monitoring System Design Methodology

    International Nuclear Information System (INIS)

    Drayer, D.D.; DeLand, S.M.; Harmon, C.D.; Matter, J.C.; Martinez, R.L.; Smith, J.D.

    1999-01-01

    A methodology for designing Unattended Monitoring Systems starting at a systems level has been developed at Sandia National Laboratories. This proven methodology provides a template that describes the process for selecting and applying appropriate technologies to meet unattended system requirements, as well as providing a framework for development of both training courses and workshops associated with unattended monitoring. The design and implementation of unattended monitoring systems is generally intended to respond to some form of policy based requirements resulting from international agreements or domestic regulations. Once the monitoring requirements are established, a review of the associated process and its related facilities enables identification of strategic monitoring locations and development of a conceptual system design. The detailed design effort results in the definition of detection components as well as the supporting communications network and data management scheme. The data analyses then enables a coherent display of the knowledge generated during the monitoring effort. The resultant knowledge is then compared to the original system objectives to ensure that the design adequately addresses the fundamental principles stated in the policy agreements. Implementation of this design methodology will ensure that comprehensive unattended monitoring system designs provide appropriate answers to those critical questions imposed by specific agreements or regulations. This paper describes the main features of the methodology and discusses how it can be applied in real world situations

  19. Design and methodology of a mixed methods follow-up study to the 2014 Ghana Demographic and Health Survey

    OpenAIRE

    Staveteig, Sarah; Aryeetey, Richmond; Anie-Ansah, Michael; Ahiadeke, Clement; Ortiz, Ladys

    2017-01-01

    ABSTRACT Background: The intended meaning behind responses to standard questions posed in large-scale health surveys are not always well understood. Systematic follow-up studies, particularly those which pose a few repeated questions followed by open-ended discussions, are well positioned to gauge stability and consistency of data and to shed light on the intended meaning behind survey responses. Such follow-up studies require extensive coordination and face challenges in protecting responden...

  20. Survey of Dynamic PSA Methodologies

    International Nuclear Information System (INIS)

    Lee, Hansul; Kim, Hyeonmin; Heo, Gyunyoung; Kim, Taewan

    2015-01-01

    Event Tree(ET)/Fault Tree(FT) are significant methodology in Probabilistic Safety Assessment(PSA) for Nuclear Power Plants(NPPs). ET/FT methodology has the advantage for users to be able to easily learn and model. It enables better communication between engineers engaged in the same field. However, conventional methodologies are difficult to cope with the dynamic behavior (e.g. operation mode changes or sequence-dependent failure) and integrated situation of mechanical failure and human errors. Meanwhile, new possibilities are coming for the improved PSA by virtue of the dramatic development on digital hardware, software, information technology, and data analysis.. More specifically, the computing environment has been greatly improved with being compared to the past, so we are able to conduct risk analysis with the large amount of data actually available. One method which can take the technological advantages aforementioned should be the dynamic PSA such that conventional ET/FT can have time- and condition-dependent behaviors in accident scenarios. In this paper, we investigated the various enabling techniques for the dynamic PSA. Even though its history and academic achievement was great, it seems less interesting from industrial and regulatory viewpoint. Authors expect this can contribute to better understanding of dynamic PSA in terms of algorithm, practice, and applicability. In paper, the overview for the dynamic PSA was conducted. Most of methodologies share similar concepts. Among them, DDET seems a backbone for most of methodologies since it can be applied to large problems. The common characteristics sharing the concept of DDET are as follows: • Both deterministic and stochastic approaches • Improves the identification of PSA success criteria • Helps to limit detrimental effects of sequence binning (normally adopted in PSA) • Helps to avoid defining non-optimal success criteria that may distort the risk • Framework for comprehensively considering

  1. The Pakistan national blindness and visual impairment survey--research design, eye examination methodology and results of the pilot study.

    Science.gov (United States)

    Bourne, Rupert; Dineen, Brendan; Jadoon, Zahid; Lee, Pak S; Khan, Aman; Johnson, Gordon J; Foster, Allen; Khan, Daud

    2005-10-01

    To establish age- and sex-specific prevalence rates and causes of blindness and low vision in children aged 10 to 15 years and adults aged 30 years and older in Pakistan. Multi-stage, stratified (rural/urban), cluster random sampling, with probability proportional-to-size procedures, was utilised to select a cross-sectional, nationally representative sample of adults (16,600 subjects) and children (6,000 subjects). Each subject underwent: interview, visual acuity (logMAR), autorefraction and optic disc examination. Those that saw visual acuity and dilated posterior segment examination. The results of a pilot survey are reported in this paper. In the two rural pilot sites, 159 subjects (including 47 children) were examined; 50% were male. Thirty seven adults (23.3%) but no children saw worse than 6/12 in either eye. Two subjects were blind (corrected visual acuity) in the better eye, and 11 were visually impaired. Refractive error was the main cause (in 22 eyes (39% of the total of 56 eyes)) of visual acuity, followed by cataract (12 eyes), uncorrected aphakia (6 eyes) and age-related macular disease (3 eyes). The pilot survey demonstrated that the proposed examination process for the main survey is feasible. Particular strengths of this survey include the use of logMAR visual acuity testing and autorefraction of all subjects, a dilated posterior segment examination, and the use of a 'less than 6/12' threshold for further examination. This lower threshold addresses the burden of refractive error, which, with cataract, are two of the diseases specifically targeted by Vision 2020.

  2. Methodologies for Crawler Based Web Surveys.

    Science.gov (United States)

    Thelwall, Mike

    2002-01-01

    Describes Web survey methodologies used to study the content of the Web, and discusses search engines and the concept of crawling the Web. Highlights include Web page selection methodologies; obstacles to reliable automatic indexing of Web sites; publicly indexable pages; crawling parameters; and tests for file duplication. (Contains 62…

  3. Waste Package Design Methodology Report

    Energy Technology Data Exchange (ETDEWEB)

    D.A. Brownson

    2001-09-28

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.

  4. Ship design methodologies of preliminary design

    CERN Document Server

    Papanikolaou, Apostolos

    2014-01-01

    This book deals with ship design and in particular with methodologies of the preliminary design of ships. The book is complemented by a basic bibliography and five appendices with useful updated charts for the selection of the main dimensions and other basic characteristics of different types of ships (Appendix A), the determination of hull form  from the data of systematic hull form series (Appendix B), the detailed description of the relational method for the preliminary estimation of ship weights (Appendix C), a brief review of the historical evolution of shipbuilding science and technology from the prehistoric era to date (Appendix D) and finally a historical review of regulatory developments of ship's damage stability to date (Appendix E).  The book can be used as textbook for ship design courses or as additional reading for university or college students of naval architecture courses and related disciplines; it may also serve as a reference book for naval architects, practicing engineers of rel...

  5. 2002 Navy Quality of Life Survey: Methodology

    Science.gov (United States)

    2004-06-30

    religion or spirituality an important factor in your life ? Yes No 1 2 Go to LIFE AS A WHOLE on...Decreases desire to stay Greatly decreases desire to stay1 2 3 4 5 77. Is religion or spirituality an important factor in your life ? Yes No 1 2 Go to LIFE ...2004 2002 Navy Quality of Life Survey: Methodology Gerry L. Wilcove, Ph.D. Mary Sue Hay, Ph.D. Approved for public release; distribution is

  6. Design Methodologies: Industrial and Educational Applications

    NARCIS (Netherlands)

    Tomiyama, T.; Gul, P.; Jin, Y.; Lutters, Diederick; Kind, Ch.; Kimura, F.

    2009-01-01

    The field of Design Theory and Methodology has a rich collection of research results that has been taught at educational institutions as well as applied to design practices. First, this keynote paper describes some methods to classify them. It then illustrates individual theories and methodologies

  7. Reef Fish Survey Techniques: Assessing the Potential for Standardizing Methodologies.

    Directory of Open Access Journals (Sweden)

    Zachary R Caldwell

    Full Text Available Dramatic changes in populations of fishes living on coral reefs have been documented globally and, in response, the research community has initiated efforts to assess and monitor reef fish assemblages. A variety of visual census techniques are employed, however results are often incomparable due to differential methodological performance. Although comparability of data may promote improved assessment of fish populations, and thus management of often critically important nearshore fisheries, to date no standardized and agreed-upon survey method has emerged. This study describes the use of methods across the research community and identifies potential drivers of method selection. An online survey was distributed to researchers from academic, governmental, and non-governmental organizations internationally. Although many methods were identified, 89% of survey-based projects employed one of three methods-belt transect, stationary point count, and some variation of the timed swim method. The selection of survey method was independent of the research design (i.e., assessment goal and region of study, but was related to the researcher's home institution. While some researchers expressed willingness to modify their current survey protocols to more standardized protocols (76%, their willingness decreased when methodologies were tied to long-term datasets spanning five or more years. Willingness to modify current methodologies was also less common among academic researchers than resource managers. By understanding both the current application of methods and the reported motivations for method selection, we hope to focus discussions towards increasing the comparability of quantitative reef fish survey data.

  8. 45 Years with Design Methodology

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2011-01-01

    ‘Engineering Design and Product Development’ at the Technical University of Denmark; the ‘Copenhagen School’ as our friends often refer to us. The conclusion attempts to balance in a joint model what I see as the role of design research in the worlds of teaching and practice, and where I see the challenges...... Theory of Technical Systems, Engineering Design and Product Development, and our attempts to create a totality out of design philosophy, Domain Theory, Theory of Properties and our understanding of product development. Together they are the main part of ‘our school’, namely the foundation of the group...

  9. The Art of Design: A Design Methodology

    Science.gov (United States)

    2009-04-01

    both ‘what’ and ‘how.’”7 Employing Design Thinking Design, planning, and execution are interde- pendent and continuous activities as illustrated in...communicate the results of design, so saMs encourages the creative use of both written narratives and graphic portrayals of design thinking to transmit

  10. Design of formulated products: a systematic methodology

    DEFF Research Database (Denmark)

    Conte, Elisa; Gani, Rafiqul; Ng, K.M.

    2011-01-01

    -based computer-aided methodology for design and verification of a class of chemical-based products (liquid formulations) is presented. This methodology is part of an integrated three-stage approach for design/verification of liquid formulations where stage-1 generates a list of feasible product candidates and....../or verifies a specified set through a sequence of predefined activities (work-flow). Stage-2 and stage-3 (not presented here) deal with the planning and execution of experiments, for product validation. Four case studies have been developed to test the methodology. The computer-aided design (stage-1...

  11. Issues in environmental survey design

    International Nuclear Information System (INIS)

    Iachan, R.

    1989-01-01

    Several environmental survey design issues are discussed and illustrated with surveys designed by Research Triangle Institute statisticians. Issues related to sampling and nonsampling errors are illustrated for indoor air quality surveys, radon surveys, pesticide surveys, and occupational and personal exposure surveys. Sample design issues include the use of auxiliary information (e.g. for stratification), and sampling in time. We also discuss the reduction and estimation of nonsampling errors, including nonresponse and measurement bias

  12. A survey of decision tree classifier methodology

    Science.gov (United States)

    Safavian, S. R.; Landgrebe, David

    1991-01-01

    Decision tree classifiers (DTCs) are used successfully in many diverse areas such as radar signal classification, character recognition, remote sensing, medical diagnosis, expert systems, and speech recognition. Perhaps the most important feature of DTCs is their capability to break down a complex decision-making process into a collection of simpler decisions, thus providing a solution which is often easier to interpret. A survey of current methods is presented for DTC designs and the various existing issues. After considering potential advantages of DTCs over single-state classifiers, subjects of tree structure design, feature selection at each internal node, and decision and search strategies are discussed.

  13. Design methodology for innovative roofs

    NARCIS (Netherlands)

    Quanjel, E.M.C.J.; Zeiler, W.; Trum, H.M.G.J.

    2006-01-01

    Traditional roofs have primary, passive, functions such as protection against rain, wind, snow etc.. Nowadays, roofs are increasingly used as preferred location for additional functions such as photovoltaic systems, roof lights and safety devices. New approaches, on designing as well as assembling

  14. A survey of attitudes and factors associated with successful cardiopulmonary resuscitation (CPR knowledge transfer in an older population most likely to witness cardiac arrest: design and methodology

    Directory of Open Access Journals (Sweden)

    Brehaut Jamie C

    2008-11-01

    Full Text Available Abstract Background Overall survival rates for out-of-hospital cardiac arrest rarely exceed 5%. While bystander cardiopulmonary resuscitation (CPR can increase survival for cardiac arrest victims by up to four times, bystander CPR rates remain low in Canada (15%. Most cardiac arrest victims are men in their sixties, they usually collapse in their own home (85% and the event is witnessed 50% of the time. These statistics would appear to support a strategy of targeted CPR training for an older population that is most likely to witness a cardiac arrest event. However, interest in CPR training appears to decrease with advancing age. Behaviour surrounding CPR training and performance has never been studied using well validated behavioural theories. Methods/Design The overall goal of this study is to conduct a survey to better understand the behavioural factors influencing CPR training and performance in men and women 55 years of age and older. The study will proceed in three phases. In phase one, semi-structured qualitative interviews will be conducted and recorded to identify common categories and themes regarding seeking CPR training and providing CPR to a cardiac arrest victim. The themes identified in the first phase will be used in phase two to develop, pilot-test, and refine a survey instrument based upon the Theory of Planned Behaviour. In the third phase of the project, the final survey will be administered to a sample of the study population over the telephone. Analyses will include measures of sampling bias, reliability of the measures, construct validity, as well as multiple regression analyses to identify constructs and beliefs most salient to seniors' decisions about whether to attend CPR classes or perform CPR on a cardiac arrest victim. Discussion The results of this survey will provide valuable insight into factors influencing the interest in CPR training and performance among a targeted group of individuals most susceptible to

  15. Methodological Issues in Survey Research: A Historical Review

    NARCIS (Netherlands)

    de Heer, W.; de Leeuw, E.D.; van der Zouwen, J.

    1999-01-01

    In this paper, we present a historical overview of social surveys and describe the historical development of scientific survey methodology and survey statistics. The origins of survey research can be traced back to the early 19th century and the first scientiflc survey was conducted in England in

  16. Design methodology and projects for space engineering

    Science.gov (United States)

    Nichols, S.; Kleespies, H.; Wood, K.; Crawford, R.

    1993-01-01

    NASA/USRA is an ongoing sponsor of space design projects in the senior design course of the Mechanical Engineering Department at The University of Texas at Austin. This paper describes the UT senior design sequence, consisting of a design methodology course and a capstone design course. The philosophical basis of this sequence is briefly summarized. A history of the Department's activities in the Advanced Design Program is then presented. The paper concludes with a description of the projects completed during the 1991-92 academic year and the ongoing projects for the Fall 1992 semester.

  17. South Korean anthropometric data and survey methodology: 'Size Korea' project.

    Science.gov (United States)

    Kim, Jung Yong; You, Jae Woo; Kim, Mi Sook

    2017-11-01

    Considering the many emerging markets in East Asia, access to contemporary anthropometric data for this region is important for designers and manufacturers seeking to produce the best fitting products and living environments for consumers. The purpose of this paper is to describe Korean anthropometric data collection and survey techniques for those who are interested in ethnic characteristics, conducting surveys, and formulating ergonomic product designs for South Korean and, more broadly, East Asian populations. The Size Korea survey was conducted in 2003-2004 and 2010. A total of 14,200 civilians aged 0-90 years participated in the survey, with 119 body and weight dimensions measured in 2004. Twenty new dimensions from Inbody measurement were added in 2010 and the data were continuously updated. We referred to ISO 7250, 8559 and 15535 to ensure validity and reliability. Fifty major body dimensions, including weight, are summarised in this paper, and 34 of these dimensions can be compared with 11 multinational data already reported  in other publications. Practitioner Summary: This paper presents the up-to-date anthropometric database of East Asian physical characteristics and survey methodology. These data satisfy the ISO standards and comprise 50 physical dimensions including weight. Thirty-four dimensions of these can be directly compared with available multinational data.

  18. Split Questionnaire Design for Massive Surveys

    NARCIS (Netherlands)

    Adiguzel, F.; Wedel, M.

    2008-01-01

    Companies are conducting more and longer surveys than ever before. Massive questionnaires are pervasive in marketing practice. As an alternative to the heuristic methods that are currently used to split questionnaires, this study develops a methodology to design the split questionnaire in a way that

  19. Design science methodology: principles and practice

    NARCIS (Netherlands)

    Wieringa, Roelf J.

    Design scientists have to balance the demands of methodological rigor that they share with purely curiosity-driven scientists, with the demands of practical utility that they share with utility-driven engineers. Balancing these conflicting demands can be conceptually complex and may lead to

  20. Ultra wideband antennas design, methodologies, and performance

    CERN Document Server

    Galvan-Tejada, Giselle M; Jardón Aguilar, Hildeberto

    2015-01-01

    Ultra Wideband Antennas: Design, Methodologies, and Performance presents the current state of the art of ultra wideband (UWB) antennas, from theory specific for these radiators to guidelines for the design of omnidirectional and directional UWB antennas. Offering a comprehensive overview of the latest UWB antenna research and development, this book:Discusses the developed theory for UWB antennas in frequency and time domainsDelivers a brief exposition of numerical methods for electromagnetics oriented to antennasDescribes solid-planar equivalen

  1. System-level design methodologies for telecommunication

    CERN Document Server

    Sklavos, Nicolas; Goehringer, Diana; Kitsos, Paris

    2013-01-01

    This book provides a comprehensive overview of modern networks design, from specifications and modeling to implementations and test procedures, including the design and implementation of modern networks on chip, in both wireless and mobile applications.  Topical coverage includes algorithms and methodologies, telecommunications, hardware (including networks on chip), security and privacy, wireless and mobile networks and a variety of modern applications, such as VoLTE and the internet of things.

  2. Waste Package Component Design Methodology Report

    Energy Technology Data Exchange (ETDEWEB)

    D.C. Mecham

    2004-07-12

    This Executive Summary provides an overview of the methodology being used by the Yucca Mountain Project (YMP) to design waste packages and ancillary components. This summary information is intended for readers with general interest, but also provides technical readers a general framework surrounding a variety of technical details provided in the main body of the report. The purpose of this report is to document and ensure appropriate design methods are used in the design of waste packages and ancillary components (the drip shields and emplacement pallets). The methodology includes identification of necessary design inputs, justification of design assumptions, and use of appropriate analysis methods, and computational tools. This design work is subject to ''Quality Assurance Requirements and Description''. The document is primarily intended for internal use and technical guidance for a variety of design activities. It is recognized that a wide audience including project management, the U.S. Department of Energy (DOE), the U.S. Nuclear Regulatory Commission, and others are interested to various levels of detail in the design methods and therefore covers a wide range of topics at varying levels of detail. Due to the preliminary nature of the design, readers can expect to encounter varied levels of detail in the body of the report. It is expected that technical information used as input to design documents will be verified and taken from the latest versions of reference sources given herein. This revision of the methodology report has evolved with changes in the waste package, drip shield, and emplacement pallet designs over many years and may be further revised as the design is finalized. Different components and analyses are at different stages of development. Some parts of the report are detailed, while other less detailed parts are likely to undergo further refinement. The design methodology is intended to provide designs that satisfy the safety

  3. Prescriptive Training Courseware: IS-Design Methodology

    Directory of Open Access Journals (Sweden)

    Elspeth McKay

    2018-03-01

    Full Text Available Information systems (IS research is found in many diverse communities. This paper explores the human-dimension of human-computer interaction (HCI to present IS-design practice in the light of courseware development. Assumptions are made that online courseware provides the perfect solution for maintaining a knowledgeable, well skilled workforce. However, empirical investigations into the effectiveness of information technology (IT-induced training solutions are scarce. Contemporary research concentrates on information communications technology (ICT training tools without considering their effectiveness. This paper offers a prescriptive IS-design methodology for managing the requirements for efficient and effective courseware development. To develop the methodology, we examined the main instructional design (ID factors that affect the design of IT-induced training programs. We also examined the tension between maintaining a well-skilled workforce and effective instructional systems design (ISD practice by probing the current ID models used by courseware developers since 1990. An empirical research project, which utilized this IS-design methodology investigated the effectiveness of using IT to train government employees in introductory ethics; this was a study that operationalized the interactive effect of cognitive preference and instructional format on training performance outcomes. The data was analysed using Rasch item response theory (IRT that models the discrimination of people’s performance relative to each other’s performance and the test-items’ difficulty relative to each test-item on the same logit scale. The findings revealed that IS training solutions developed using this IS-design methodology can be adapted to provide trainees with their preferred instructional mode and facilitate cost effective eTraining outcomes.

  4. Diseño y metodología de la Encuesta Nacional de Salud 2000 National Health Survey 2000: design and methodology

    Directory of Open Access Journals (Sweden)

    Jaime Sepúlveda

    2007-01-01

    Full Text Available OBJETIVO: Como parte del Sistema de Encuestas Nacionales de Salud, durante los últimos meses de 1999 y los primeros tres del año 2000 se realizó la Encuesta Nacional de Salud de México (ENSA 2000. Se estudió la accesibilidad, calidad, utilización y cobertura de los Servicios de Salud; de modo adicional se actualizaron los marcadores serológicos de enfermedades infecciosas prevenibles por vacunación, infecciones de transmisión sexual y hepatitis. MATERIAL Y MÉTODOS: Para la ENSA 2000 se seleccionaron tres grupos etarios y a los utilizadores de los servicios de salud. Se captó la información mediante entrevista directa y se tomaron muestras biológicas para análisis clínicos y medidas de parámetros biológicos y somatométricos. El diseño muestral de la ENSA 2000 fue probabilístico, polietápico, estratificado y de conglomerados. El tamaño de la muestra fue de 1 470 viviendas por estado, para un total de 47 040 viviendas a nivel nacional; los factores de expansión se modificaron por la falta de respuesta y la posestratificación. El personal operativo se capacitó y estandarizó para mantener una alta respuesta, en especial para las muestras de sangre. RESULTADOS: En total se obtuvieron 83 157 muestras de sangre de las 94 000 esperadas (respuesta de 88% que se mantuvieron refrigeradas en tanto se ubicaron en el laboratorio del Instituto Nacional de Salud Pública donde se prepararon cuatro alícuotas y se congelaron a -150° C hasta el análisis.OBJECTIVE: The 2000 Mexican National Health Survey (NHS was created as part of the System for National Health Surveys conducted during the last months of 1999 and the first three of 2000. The 2000 NHS is a probabilistic survey of households from which users of health services were selected according to three age groups. Information was gathered through direct interviews with appropriate informants. Biological samples were taken for clinical tests as well as for measuring biological and

  5. Basic Project Management Methodologies for Survey Researchers.

    Science.gov (United States)

    Beach, Robert H.

    To be effective, project management requires a heavy dependence on the document, list, and computational capability of a computerized environment. Now that microcomputers are readily available, only the rediscovery of classic project management methodology is required for improved resource allocation in small research projects. This paper provides…

  6. The French national survey on food consumption of children under 3 years of age - Nutri-Bébé 2013: design, methodology, population sampling and feeding practices.

    Science.gov (United States)

    Chouraqui, Jean-Pierre; Tavoularis, Gabriel; Emery, Yves; Francou, Aurée; Hébel, Pascale; Bocquet, Magali; Hankard, Régis; Turck, Dominique

    2018-02-01

    To update the data on food consumption and practices in children under 3 years of age in metropolitan France. The Nutri-Bébé 2013 cross-sectional study selected a random sample, according to the quota sampling method. After giving their informed consent, parents had to record the food consumption during three non-consecutive days framed by two face-to-face interviews, using for quantitative information different portion size measurement aids. One thousand one hundred and eighty-four children were enrolled. Mothers' mean age was 30·8 (sd 5·4) years; 38 % were primiparous; 89 % lived with a partner; 60 % had an occupation. Of the infants younger than 4 months, 31 % were breast-fed. One thousand and thirty-five children consumed infant formula followed by growing-up milk in 63 % of them; solid foods were introduced at a mean age of 5·4 (sd 2·13) months. From 8 months onwards, 25 % of children consumed the same foods as their parents on a more or less regular basis; 29 % ate in front of a screen, with a daily average screen time of 43·0 (sd 40·4) min. This robust survey highlights the low prevalence and duration of breast-feeding in France and shows a modest improvement since the previous survey of 2005 in the observance of recommendations concerning other feeding practices. The frequent consumption of adult foods and the screen time are of concern.

  7. Principal provisions of engineering and geological survey methodology in designing and construction of underground laboratory as a part of facility of RW underground isolation

    International Nuclear Information System (INIS)

    Prokopova, O.A.

    2006-01-01

    The most critical moment is the choice of a site for radioactive waste geological repository. Here the role of engineering and geological prospecting as a basis for the construction of a facility for underground isolation appears especially important; it is followed by finding a suitable area and subsequent allocation of the site and facility construction sites. The decision on the selection of construction site for the underground repository is taken by the principle 'descent from the general to the particular', which is a continuous process with the observance of stages in research for the design and exploration work. Each stage of research is typified by specific scale and methods of geological and geophysical studies and scientific research to be fulfilled in scopes sufficient for solution of basic problems for the designing. (author)

  8. Survey and Evaluate Uncertainty Quantification Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Guang; Engel, David W.; Eslinger, Paul W.

    2012-02-01

    The Carbon Capture Simulation Initiative (CCSI) is a partnership among national laboratories, industry and academic institutions that will develop and deploy state-of-the-art computational modeling and simulation tools to accelerate the commercialization of carbon capture technologies from discovery to development, demonstration, and ultimately the widespread deployment to hundreds of power plants. The CCSI Toolset will provide end users in industry with a comprehensive, integrated suite of scientifically validated models with uncertainty quantification, optimization, risk analysis and decision making capabilities. The CCSI Toolset will incorporate commercial and open-source software currently in use by industry and will also develop new software tools as necessary to fill technology gaps identified during execution of the project. The CCSI Toolset will (1) enable promising concepts to be more quickly identified through rapid computational screening of devices and processes; (2) reduce the time to design and troubleshoot new devices and processes; (3) quantify the technical risk in taking technology from laboratory-scale to commercial-scale; and (4) stabilize deployment costs more quickly by replacing some of the physical operational tests with virtual power plant simulations. The goal of CCSI is to deliver a toolset that can simulate the scale-up of a broad set of new carbon capture technologies from laboratory scale to full commercial scale. To provide a framework around which the toolset can be developed and demonstrated, we will focus on three Industrial Challenge Problems (ICPs) related to carbon capture technologies relevant to U.S. pulverized coal (PC) power plants. Post combustion capture by solid sorbents is the technology focus of the initial ICP (referred to as ICP A). The goal of the uncertainty quantification (UQ) task (Task 6) is to provide a set of capabilities to the user community for the quantification of uncertainties associated with the carbon

  9. Methodology of the National School-based Health Survey in Malaysia, 2012.

    Science.gov (United States)

    Yusoff, Fadhli; Saari, Riyanti; Naidu, Balkish M; Ahmad, Noor Ani; Omar, Azahadi; Aris, Tahir

    2014-09-01

    The National School-Based Health Survey 2012 was a nationwide school health survey of students in Standard 4 to Form 5 (10-17 years of age), who were schooling in government schools in Malaysia during the period of data collection. The survey comprised 3 subsurveys: the Global School Health Survey (GSHS), the Mental Health Survey, and the National School-Based Nutrition Survey. The aim of the survey was to provide data on the health status of adolescents in Malaysia toward strengthening the adolescent health program in the country. The design of the survey was created to fulfill the requirements of the 3 subsurveys. A 2-stage stratified sampling method was adopted in the sampling. The methods for data collection were via questionnaire and physical examination. The National School-Based Health Survey 2012 adopted an appropriate methodology for a school-based survey to ensure valid and reliable findings. © 2014 APJPH.

  10. Mixed-signal methodology guide advanced methodology for AMS IP and SOC design, verification and implementation

    CERN Document Server

    Chen, Jess; Mar, Monte F; Nizic, Mladen; Bailey, Brian

    2012-01-01

    This Book, The Mixed-Signal Methodology Guide: Advanced Methodology For Ams Ip And Soc Design, Verification, And Implementation Provides A Broad Overview Of The Design, Verification And Implementation Methodologies Required For Today's Mixed-Signal Designs. The Book Covers Mixed-Signal Design Trends And Challenges, Abstraction Of Analog Using Behavioral Models, Assertion-Based Metric-Driven Verification Methodology Applied On Analog And Mixed-Signal And Verification Of Low Power Intent In Mixed-Signal Design. It Also Describes Methodology For Physical Implementation In Context Of Concurrent Mixed-Signal Design And For Handling Advanced Node Physical Effects. The Book Contains Many Practical Examples Of Models And Techniques. The Authors Believe It Should Serve As A Reference To Many Analog, Digital And Mixed-Signal Designers, Verification, Physical Implementation Engineers And Managers In Their Pursuit Of Information For A Better Methodology Required To Address The Challenges Of Modern Mixed-Signal Design.

  11. Diseño metodológico de la Encuesta Nacional sobre Violencia contra las Mujeres en México Methodological Design for the National Survey Violence Against Women in Mexico

    Directory of Open Access Journals (Sweden)

    Gustavo Olaiz

    2006-01-01

    Full Text Available OBJETIVO: Describir la metodología utilizada en la Encuesta Nacional sobre Violencia contra las Mujeres 2003 (ENVIM 2003 en México, junto con el diseño de investigación, la estimación y la selección de muestras, la definición de variables, los instrumentos de recolección, el diseño operativo para su instrumentación y los procedimientos de análisis. MATERIAL Y MÉTODOS: En la parte cuantitativa se recurrió a un diseño transversal en dos etapas. En el componente cualitativo se realizaron entrevistas en profundidad y observación participante en unidades médicas. RESULTADOS: Se obtuvo un total de 26 240 entrevistas, aplicadas a usuarias de los servicios de salud; y 2 636 cuestionarios correspondientes a proveedores, que abarcaron los 32 estados de la República. En el estudio cualitativo se llevó a cabo un total de 26 entrevistas de profundidad a usuarias y 60 entrevistas de profundidad a prestadores de servicios de salud en los estados de Quintana Roo, Coahuila y el Distrito Federal.OBJECTIVE: To describe the methodology, the research designs used, the estimation and sample selection, variable definitions, collection instruments, and operative design and analytical procedures for the National Survey Violence Against Women in Mexico. MATERIAL AND METHODS: A complex (two-step cross-sectional study was designed and the qualitative design was carried out using in-depth interviews and participant observation in health care units. RESULTS: We obtained for the quantitative study a total of 26 240 interviews in women users of health services and 2 636 questionnaires for health workers; the survey is representative of the 32 Mexican states. For the qualitative study 26 in-depth interviews were conducted with female users and 60 interviews with health workers in the States of Quintana Roo, Coahuila and the Federal District.

  12. Design of methodology for incremental compiler construction

    Directory of Open Access Journals (Sweden)

    Pavel Haluza

    2011-01-01

    Full Text Available The paper deals with possibilities of the incremental compiler construction. It represents the compiler construction possibilities for languages with a fixed set of lexical units and for languages with a variable set of lexical units, too. The methodology design for the incremental compiler construction is based on the known algorithms for standard compiler construction and derived for both groups of languages. Under the group of languages with a fixed set of lexical units there belong languages, where each lexical unit has its constant meaning, e.g., common programming languages. For this group of languages the paper tries to solve the problem of the incremental semantic analysis, which is based on incremental parsing. In the group of languages with a variable set of lexical units (e.g., professional typographic system TEX, it is possible to change arbitrarily the meaning of each character on the input file at any time during processing. The change takes effect immediately and its validity can be somehow limited or is given by the end of the input. For this group of languages this paper tries to solve the problem case when we use macros temporarily changing the category of arbitrary characters.

  13. Development of a New Methodology for Rock Engineering Design

    Science.gov (United States)

    1994-03-01

    Work ....................... 321 REFERENCES ............................................. 325 APPENDIX 1: Design Methodology Flow Charts ( Bieniawski ...1989) ......................................... 19 Figure 13: The design cycle for rock engineering ( Bieniawski 1984) ........ 20 Figure 1.4: Thesis...excavations in rock (Hoek & Brown 1980) 33 Figure 2.4: Design methodology for rock mechanics, including the use of design principles. ( Bieniawski 1991

  14. Methodology for Preliminary Design of Electrical Microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Richard P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Stamp, Jason E. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Eddy, John P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Henry, Jordan M [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Munoz-Ramos, Karina [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Abdallah, Tarek [U.S. Army Corps of Engineers, Washington, DC (United States)

    2015-09-30

    Many critical loads rely on simple backup generation to provide electricity in the event of a power outage. An Energy Surety Microgrid TM can protect against outages caused by single generator failures to improve reliability. An ESM will also provide a host of other benefits, including integration of renewable energy, fuel optimization, and maximizing the value of energy storage. The ESM concept includes a categorization for microgrid value proposi- tions, and quantifies how the investment can be justified during either grid-connected or utility outage conditions. In contrast with many approaches, the ESM approach explic- itly sets requirements based on unlikely extreme conditions, including the need to protect against determined cyber adversaries. During the United States (US) Department of Defense (DOD)/Department of Energy (DOE) Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) effort, the ESM methodology was successfully used to develop the preliminary designs, which direct supported the contracting, construction, and testing for three military bases. Acknowledgements Sandia National Laboratories and the SPIDERS technical team would like to acknowledge the following for help in the project: * Mike Hightower, who has been the key driving force for Energy Surety Microgrids * Juan Torres and Abbas Akhil, who developed the concept of microgrids for military installations * Merrill Smith, U.S. Department of Energy SPIDERS Program Manager * Ross Roley and Rich Trundy from U.S. Pacific Command * Bill Waugaman and Bill Beary from U.S. Northern Command * Melanie Johnson and Harold Sanborn of the U.S. Army Corps of Engineers Construc- tion Engineering Research Laboratory * Experts from the National Renewable Energy Laboratory, Idaho National Laboratory, Oak Ridge National Laboratory, and Pacific Northwest National Laboratory

  15. Optimal (Solvent) Mixture Design through a Decomposition Based CAMD methodology

    OpenAIRE

    Achenie, L.; Karunanithi, Arunprakash T.; Gani, Rafiqul

    2004-01-01

    Computer Aided Molecular/Mixture design (CAMD) is one of the most promising techniques for solvent design and selection. A decomposition based CAMD methodology has been formulated where the mixture design problem is solved as a series of molecular and mixture design sub-problems. This approach is able to overcome most of the difficulties associated with the solution of mixture design problems. The new methodology has been illustrated with the help of a case study involving the design of solve...

  16. A Design Methodology for Computer Security Testing

    OpenAIRE

    Ramilli, Marco

    2013-01-01

    The field of "computer security" is often considered something in between Art and Science. This is partly due to the lack of widely agreed and standardized methodologies to evaluate the degree of the security of a system. This dissertation intends to contribute to this area by investigating the most common security testing strategies applied nowadays and by proposing an enhanced methodology that may be effectively applied to different threat scenarios with the same degree of effectiveness. ...

  17. The Continued Salience of Methodological Issues for Measuring Psychiatric Disorders in International Surveys

    Science.gov (United States)

    Tausig, Mark; Subedi, Janardan; Broughton, Christopher; Pokimica, Jelena; Huang, Yinmei; Santangelo, Susan L.

    2011-01-01

    We investigated the extent to which methodological concerns explicitly addressed by the designers of the World Mental Health Surveys persist in the results that were obtained using the WMH-CIDI instrument. We compared rates of endorsement of mental illness symptoms in the United States (very high) and Nepal (very low) as they were affected by…

  18. Watershed-based survey designs

    Science.gov (United States)

    Detenbeck, N.E.; Cincotta, D.; Denver, J.M.; Greenlee, S.K.; Olsen, A.R.; Pitchford, A.M.

    2005-01-01

    Watershed-based sampling design and assessment tools help serve the multiple goals for water quality monitoring required under the Clean Water Act, including assessment of regional conditions to meet Section 305(b), identification of impaired water bodies or watersheds to meet Section 303(d), and development of empirical relationships between causes or sources of impairment and biological responses. Creation of GIS databases for hydrography, hydrologically corrected digital elevation models, and hydrologic derivatives such as watershed boundaries and upstream–downstream topology of subcatchments would provide a consistent seamless nationwide framework for these designs. The elements of a watershed-based sample framework can be represented either as a continuous infinite set defined by points along a linear stream network, or as a discrete set of watershed polygons. Watershed-based designs can be developed with existing probabilistic survey methods, including the use of unequal probability weighting, stratification, and two-stage frames for sampling. Case studies for monitoring of Atlantic Coastal Plain streams, West Virginia wadeable streams, and coastal Oregon streams illustrate three different approaches for selecting sites for watershed-based survey designs.

  19. 3-D Survey Applied to Industrial Archaeology by Tls Methodology

    Science.gov (United States)

    Monego, M.; Fabris, M.; Menin, A.; Achilli, V.

    2017-05-01

    This work describes the three-dimensional survey of "Ex Stazione Frigorifera Specializzata": initially used for agricultural storage, during the years it was allocated to different uses until the complete neglect. The historical relevance and the architectural heritage that this building represents has brought the start of a recent renovation project and functional restoration. In this regard it was necessary a global 3-D survey that was based on the application and integration of different geomatic methodologies (mainly terrestrial laser scanner, classical topography, and GNSS). The acquisitions of point clouds was performed using different laser scanners: with time of flight (TOF) and phase shift technologies for the distance measurements. The topographic reference network, needed for scans alignment in the same system, was measured with a total station. For the complete survey of the building, 122 scans were acquired and 346 targets were measured from 79 vertices of the reference network. Moreover, 3 vertices were measured with GNSS methodology in order to georeference the network. For the detail survey of machine room were executed 14 scans with 23 targets. The 3-D global model of the building have less than one centimeter of error in the alignment (for the machine room the error in alignment is not greater than 6 mm) and was used to extract products such as longitudinal and transversal sections, plans, architectural perspectives, virtual scans. A complete spatial knowledge of the building is obtained from the processed data, providing basic information for restoration project, structural analysis, industrial and architectural heritage valorization.

  20. A symbolic methodology to improve disassembly process design.

    Science.gov (United States)

    Rios, Pedro; Blyler, Leslie; Tieman, Lisa; Stuart, Julie Ann; Grant, Ed

    2003-12-01

    Millions of end-of-life electronic components are retired annually due to the proliferation of new models and their rapid obsolescence. The recovery of resources such as plastics from these goods requires their disassembly. The time required for each disassembly and its associated cost is defined by the operator's familiarity with the product design and its complexity. Since model proliferation serves to complicate an operator's learning curve, it is worthwhile to investigate the benefits to be gained in a disassembly operator's preplanning process. Effective disassembly process design demands the application of green engineering principles, such as those developed by Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37, 94A-101A), which include regard for product complexity, structural commonality, separation energy, material value, and waste prevention. This paper introduces the concept of design symbolsto help the operator more efficiently survey product complexity with respect to location and number of fasteners to remove a structure that is common to all electronics: the housing. With a sample of 71 different computers, printers, and monitors, we demonstrate that appropriate symbols reduce the total disassembly planning time by 13.2 min. Such an improvement could well make efficient the separation of plastic that would otherwise be destined for waste-to-energy or landfill. The symbolic methodology presented may also improve Design for Recycling and Design for Maintenance and Support.

  1. Methodology for the conceptual design of solar kitchens

    International Nuclear Information System (INIS)

    Macia G, A F; Estrada V, D A; Chejne J, F; Velasquez, H I; Rengifo, R

    2005-01-01

    A detailed description of the methodology for the conceptual design of solar kitchens has appeared, which allows its detailed design. The methodology is based on three main phases that natural and has been very intuitively identified given to the characteristics and conditions of the project: conceptual phase, detail phase and execution phase

  2. Technical report on LWR design decision methodology. Phase I

    International Nuclear Information System (INIS)

    1980-03-01

    Energy Incorporated (EI) was selected by Sandia Laboratories to develop and test on LWR design decision methodology. Contract Number 42-4229 provided funding for Phase I of this work. This technical report on LWR design decision methodology documents the activities performed under that contract. Phase I was a short-term effort to thoroughly review the curret LWR design decision process to assure complete understanding of current practices and to establish a well defined interface for development of initial quantitative design guidelines

  3. Pipelines cathodic protection design methodologies for impressed ...

    African Journals Online (AJOL)

    Several inadequate designs of cathodically polarized offshore and onshore pipelines have been reported in Nigeria owing to design complexity and application of the cathodic protection system. The present study focused on critical and detailed approach in impressed current and sacrificial anode design calculation ...

  4. pipelines cathodic protection design methodologies for impressed ...

    African Journals Online (AJOL)

    HOD

    Several inadequate designs of cathodically polarized offshore and onshore pipelines have been reported in Nigeria owing to design complexity and application of the cathodic protection system. The present study focused on critical and detailed approach in impressed current and sacrificial anode design calculation ...

  5. Army Design Methodology: Commander’s Resource

    Science.gov (United States)

    2012-02-01

    I have done is tried to communicate to them that Design thinking has always existed. We’re just calling it something new now. And I think one of...development in Iraq, and things change very fast due to the dynamics of our on-going relationship. We used Design thinking fairly recently. There were...slide set based on the different frames of an approach to design thinking : an environmental frame, a problem frame, and developing an operational

  6. Design review of SPWR with PSA methodology

    International Nuclear Information System (INIS)

    Oikawa, Tetsukuni; Muramatsu, Ken; Iwamura, Takamichi; Tone, Tatsuzo; Kasahara, Takeo; Mizuno, Yoshio

    1993-01-01

    This paper presents the procedures and results of a PSA (Probabilistic Safety Assessment) of the SPWR (System-Integrated PWR), which is being developed at the Japan Atomic Energy Research Institute (JAERI) as a medium sized innovative passive safe reactor, to assist in the design improvement of the SPWR by reviewing the design and identifying the design weaknesses. This PSA was performed in four steps: (1) identification of initiating events by the failure mode effect analysis and other methods, (2) delineation of accident sequences for three selected initiating events using accident progression flow charts and event trees, (3) quantification of event trees based on the review of past PSAs for LWRs, and (4) sensitivity analysis and interpretation of results. Qualitative and quantitative results of PSA provided very useful information for decision makings of design improvement and recommendations for further consideration in the process of detailed design

  7. Comparative design of structures concepts and methodologies

    CERN Document Server

    Lin, Shaopei

    2016-01-01

    This book presents comparative design as an approach to the conceptual design of structures. Primarily focusing on reasonable structural performance, sustainable development and architectural aesthetics, it features detailed studies of structural performance through the composition and de-composition of these elements for a variety of structures, such as high-rise buildings, long-span crossings and spatial structures. The latter part of the book addresses the theoretical basis and practical implementation of knowledge engineering in structural design, and a case-based fuzzy reasoning method is introduced to illustrate the concept and method of intelligent design. The book is intended for civil engineers, structural designers and architects, as well as senior undergraduate and graduate students in civil engineering and architecture. Shaopei Lin and Zhen Huang are both Professors at the Department of Civil Engineering, Shanghai Jiao Tong University, China.

  8. The importance of robust design methodology

    DEFF Research Database (Denmark)

    Eifler, Tobias; Howard, Thomas J.

    2018-01-01

    of unanticipated variation effects remain largely underestimated and thus unaccounted for in design practice, sometimes with disastrous consequences. To foster the awareness of this variation and to illustrate the benefits of its early consideration in product development, this paper reviews one of the most...... to illustrate how already simple analyses and early stage design methods can help to better understand one of the potential reasons for these failures, namely the variation inherent in manufacturing, assembly, and use processes. Usually thoroughly controlled in production, it seems as if particularly the risk...... infamous recalls in automotive history, that of the GM ignition switch, from the perspective of Robust Design. It is investigated if available Robust Design methods such as sensitivity analysis, tolerance stack-ups, design clarity, etc. would have been suitable to account for the performance variation...

  9. Elements of methodology for designing Participative Document Spaces

    OpenAIRE

    Martine , Thomas; Zacklad , Manuel; Bénel , Aurélien

    2008-01-01

    International audience; This paper presents the first elements of a methodology for designing Participative Document Spaces (PDS), as well as the initial results produced by this methodology within an industrial project aiming at designing a radioactive waste disposal. We define PDS as networked digital settings (such as blogs, forums, wikis) which enable their users to build documents and converse at the same time. Designing a PDS in a given situation thus implies modeling the links between ...

  10. 3-D SURVEY APPLIED TO INDUSTRIAL ARCHAEOLOGY BY TLS METHODOLOGY

    Directory of Open Access Journals (Sweden)

    M. Monego

    2017-05-01

    Full Text Available This work describes the three-dimensional survey of “Ex Stazione Frigorifera Specializzata”: initially used for agricultural storage, during the years it was allocated to different uses until the complete neglect. The historical relevance and the architectural heritage that this building represents has brought the start of a recent renovation project and functional restoration. In this regard it was necessary a global 3-D survey that was based on the application and integration of different geomatic methodologies (mainly terrestrial laser scanner, classical topography, and GNSS. The acquisitions of point clouds was performed using different laser scanners: with time of flight (TOF and phase shift technologies for the distance measurements. The topographic reference network, needed for scans alignment in the same system, was measured with a total station. For the complete survey of the building, 122 scans were acquired and 346 targets were measured from 79 vertices of the reference network. Moreover, 3 vertices were measured with GNSS methodology in order to georeference the network. For the detail survey of machine room were executed 14 scans with 23 targets. The 3-D global model of the building have less than one centimeter of error in the alignment (for the machine room the error in alignment is not greater than 6 mm and was used to extract products such as longitudinal and transversal sections, plans, architectural perspectives, virtual scans. A complete spatial knowledge of the building is obtained from the processed data, providing basic information for restoration project, structural analysis, industrial and architectural heritage valorization.

  11. Design Methodology for Multiple Microcomputer Architectures.

    Science.gov (United States)

    1982-07-01

    Real-Time Processor Problems," Proc. of ELECTRO-81 Tercer Seminario de Ingenieria Electronica, Nov. 9-13, 1981. 14 1981 "D Flip/Flop Substracts...OFFICIAL DEPARTMENLT OF THE AR M’ PSZ !’N, PC.ICY, OR DE - CISION, UNLESS SO DESIGNATED BY OTHER OOCUMENTATJON. 19. KEY WORDS (Continue on reverse side...environment. Thirdly, there is a need for better hardware and software design tools for multimicro architectures. Finally, more research and exper- ience

  12. Optimal (Solvent) Mixture Design through a Decomposition Based CAMD methodology

    DEFF Research Database (Denmark)

    Achenie, L.; Karunanithi, Arunprakash T.; Gani, Rafiqul

    2004-01-01

    Computer Aided Molecular/Mixture design (CAMD) is one of the most promising techniques for solvent design and selection. A decomposition based CAMD methodology has been formulated where the mixture design problem is solved as a series of molecular and mixture design sub-problems. This approach is...... is able to overcome most of the difficulties associated with the solution of mixture design problems. The new methodology has been illustrated with the help of a case study involving the design of solvent-anti solvent binary mixtures for crystallization of Ibuprofen....

  13. An engineering methodology for kite design

    NARCIS (Netherlands)

    Breukels, J.

    2011-01-01

    Kites have seen substantial development in the last 10 years, going from mostly toys to high-performance sports-related equipment for e.g. kite surfing. The design process of these kites, however, is mostly a trial-and-error affair. Ten years after the sports-related kite revolution a new

  14. DESIGN METHODOLOGY OF SELF-EXCITED ASYNCHRONOUS GENERATOR

    Directory of Open Access Journals (Sweden)

    Berzan V.

    2012-04-01

    Full Text Available The paper sets out the methodology of designing an asynchronous generator with capacitive self-excitation. It is known that its design is possible on the basis of serial synchronous motor with squirrel cage rotor. With this approach, the design reworked only the stator winding of electrical machines, making it cost-effectively implement the creation of the generator. Therefore, the methodology for the design, optimization calculations, the development scheme and the stator winding excitation system gain, not only of practical interest, and may also be useful for specialists in the field of electrical machines in the design of asynchronous generators.

  15. A methodology for creating ontologies for engineering design

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Kim, Sanghee; Wallace, Ken

    2005-01-01

    This paper describes a methodology for developing ontologies for engineering design. The methodology combines a number of methods from social science and computer science, together with taxonomies developed in the field of engineering design. A case study is used throughout the paper focusing upon...... the use of an ontology for searching, indexing and retrieving of engineering knowledge. An ontology for indexing design knowledge can assist the users to formulate their queries when searching for engineering design knowledge. The root concepts of the ontology were elicited from engineering designers...

  16. Methodology of the Global Adult Tobacco Survey - 2008-2010.

    Science.gov (United States)

    Palipudi, Krishna Mohan; Morton, Jeremy; Hsia, Jason; Andes, Linda; Asma, Samira; Talley, Brandon; Caixeta, Roberta D; Fouad, Heba; Khoury, Rula N; Ramanandraibe, Nivo; Rarick, James; Sinha, Dhirendra N; Pujari, Sameer; Tursan d'Espaignet, Edouard

    2016-06-01

    In 2008, the Centers for Disease Control and Prevention (CDC) and the World Health Organization developed the Global Adult Tobacco Survey (GATS), an instrument to monitor global tobacco use and measure indicators of tobacco control. GATS, a nationally representative household survey of persons aged 15 years or older, was conducted for the first time during 2008-2010 in 14 low- and middle-income countries. In each country, GATS used a standard core questionnaire, sample design, and procedures for data collection and management and, as needed, added country-specific questions that were reviewed and approved by international experts. The core questionnaire included questions about various characteristics of the respondents, their tobacco use (smoking and smokeless), and a wide range of tobacco-related topics (cessation; secondhand smoke; economics; media; and knowledge, attitudes, and perceptions). In each country, a multistage cluster sample design was used, with households selected proportionate to the size of the population. Households were chosen randomly within a primary or secondary sampling unit, and one respondent was selected at random from each household to participate in the survey. Interviewers administered the survey in the country's local language(s) using handheld electronic data collection devices. Interviews were conducted privately, and same-sex interviewers were used in countries where mixed-sex interviews would be culturally inappropriate. All 14 countries completed the survey during 2008-2010. In each country, the ministry of health was the lead coordinating agency for GATS, and the survey was implemented by national statistical organizations or surveillance institutes. This article describes the background and rationale for GATS and includes a comprehensive description of the survey methods and protocol. © The Author(s) 2013.

  17. Further validation of bracket pillar design methodology

    CSIR Research Space (South Africa)

    Vieira, F

    1998-07-01

    Full Text Available of seismic risk along the bracketed feature. Once an informed decision is made regarding the level of seismic risk to be accepted for a given layout, the rock engineer obtains from "design charts" a recommendable pillar width, assumed to keep the risk... for each area were produced. Seismic data from the selected site was processed and interpreted. Back analyses were carried out which attempted to compare modelling data and field seismic data for the actual bracket pillar layouts. Seismic moments...

  18. Design Methodologies for Secure Embedded Systems

    CERN Document Server

    Biedermann, Alexander

    2011-01-01

    Embedded systems have been almost invisibly pervading our daily lives for several decades. They facilitate smooth operations in avionics, automotive electronics, or telecommunication. New problems arise by the increasing employment, interconnection, and communication of embedded systems in heterogeneous environments: How secure are these embedded systems against attacks or breakdowns? Therefore, how can embedded systems be designed to be more secure? And how can embedded systems autonomically react to threats? Facing these questions, Sorin A. Huss is significantly involved in the exploration o

  19. Development of a design methodology for asphalt treated mixtures.

    Science.gov (United States)

    2013-12-01

    This report summarizes the results of a study that was conducted to develop a simplified design methodology for asphalt : treated mixtures that are durable, stable, constructible, and cost effective through the examination of the performance of : mix...

  20. Value and Vision-based Methodology in Integrated Design

    DEFF Research Database (Denmark)

    Tollestrup, Christian

    is divided in three; the systemic unfolding of the Value and Vision-based methodology, the structured presentation of practical implementation of the methodology and finally the analysis and conclusion regarding the value transformation, phenomena and learning aspects of the methodology.......The research theme of this thesis is based on a paradigm shift in design which outlines two new premises for design. First, the design must be based on a clearly defined set of values due to the socio-cultural development in our rich modern western society. A massive overload of products offer...... of this thesis is the value transformation from an explicit set of values to a product concept using a vision based concept development methodology based on the Pyramid Model (Lerdahl, 2001) in a design team context. The aim of this thesis is to examine how the process of value transformation is occurring within...

  1. Surface design methodology - challenge the steel

    Science.gov (United States)

    Bergman, M.; Rosen, B.-G.; Eriksson, L.; Anderberg, C.

    2014-03-01

    The way a product or material is experienced by its user could be different depending on the scenario. It is also well known that different materials and surfaces are used for different purposes. When optimizing materials and surface roughness for a certain something with the intention to improve a product, it is important to obtain not only the physical requirements, but also the user experience and expectations. Laws and requirements of the materials and the surface function, but also the conservative way of thinking about materials and colours characterize the design of medical equipment. The purpose of this paper is to link the technical- and customer requirements of current materials and surface textures in medical environments. By focusing on parts of the theory of Kansei Engineering, improvements of the companys' products are possible. The idea is to find correlations between desired experience or "feeling" for a product, -customer requirements, functional requirements, and product geometrical properties -design parameters, to be implemented on new improved products. To be able to find new materials with the same (or better) technical requirements but a higher level of user stimulation, the current material (stainless steel) and its surface (brushed textures) was used as a reference. The usage of focus groups of experts at the manufacturer lead to a selection of twelve possible new materials for investigation in the project. In collaboration with the topical company for this project, three new materials that fulfil the requirements -easy to clean and anti-bacterial came to be in focus for further investigation in regard to a new design of a washer-disinfector for medical equipment using the Kansei based Clean ability approach CAA.

  2. Methodology for Plantwide Design and Optimization of Wastewater Treatment Plants

    DEFF Research Database (Denmark)

    Maria Dragan, Johanna; Zubov, Alexandr; Sin, Gürkan

    2017-01-01

    Design of Wastewater Treatment Plants (WWTPs) is a complex engineering task which requires integration of knowledge and experience from environmental biotechnology, process engineering, process synthesis and design as well as mathematical programming. A methodology has been formulated and applied...... for the systematic analysis and development of plantwide design of WWTPs using mathematical optimization and statistical methods such as sensitivity and uncertainty analyses....

  3. National working conditions surveys in Latin America: comparison of methodological characteristics.

    Science.gov (United States)

    Merino-Salazar, Pamela; Artazcoz, Lucía; Campos-Serna, Javier; Gimeno, David; Benavides, Fernando G

    2015-01-01

    High-quality and comparable data to monitor working conditions and health in Latin America are not currently available. In 2007, multiple Latin American countries started implementing national working conditions surveys. However, little is known about their methodological characteristics. To identify commonalities and differences in the methodologies of working conditions surveys (WCSs) conducted in Latin America through 2013. The study critically examined WCSs in Latin America between 2007 and 2013. Sampling design, data collection, and questionnaire content were compared. Two types of surveys were identified: (1) surveys covering the entire working population and administered at the respondent's home and (2) surveys administered at the workplace. There was considerable overlap in the topics covered by the dimensions of employment and working conditions measured, but less overlap in terms of health outcomes, prevention resources, and activities. Although WCSs from Latin America are similar, there was heterogeneity across surveyed populations and location of the interview. Reducing differences in surveys between countries will increase comparability and allow for a more comprehensive understanding of occupational health in the region.

  4. Multidisciplinary integrated design optimization methodology of marine power plants

    OpenAIRE

    ZENG Fanming; LIU Jinlin; LAI Guojun

    2017-01-01

    In this paper, based on a full analysis of the research status for the overall design of marine power plants, the problem of the improvement of marine power plant design being limited by a lack of research into multidisciplinary coupling simulation and optimization for marine power plant design is pointed out, research into the multidisciplinary integrated design optimization theory and methodology for marine power plants is proposed, and a framework for a multidisciplinary integrated design ...

  5. Experimental Validation of an Integrated Controls-Structures Design Methodology

    Science.gov (United States)

    Maghami, Peiman G.; Gupta, Sandeep; Elliot, Kenny B.; Walz, Joseph E.

    1996-01-01

    The first experimental validation of an integrated controls-structures design methodology for a class of large order, flexible space structures is described. Integrated redesign of the controls-structures-interaction evolutionary model, a laboratory testbed at NASA Langley, was described earlier. The redesigned structure was fabricated, assembled in the laboratory, and experimentally tested against the original structure. Experimental results indicate that the structure redesigned using the integrated design methodology requires significantly less average control power than the nominal structure with control-optimized designs, while maintaining the required line-of-sight pointing performance. Thus, the superiority of the integrated design methodology over the conventional design approach is experimentally demonstrated. Furthermore, amenability of the integrated design structure to other control strategies is evaluated, both analytically and experimentally. Using Linear-Quadratic-Guassian optimal dissipative controllers, it is observed that the redesigned structure leads to significantly improved performance with alternate controllers as well.

  6. The methodology of integrated DOE safeguards and security surveys at the Savannah River Site

    International Nuclear Information System (INIS)

    Brownell, L.; Kilmartin, W.E.; Terrell, J.T.; Williams, T.L.

    1995-01-01

    As safeguards and security (S and S) directives, policies, and guidance are modified to address the changing environment of the US Department of Energy (DOE) weapons complex, the DOE Savannah River Operations Office (SR) has developed and implemented an integrated S and S survey evaluation program. The survey program is designed to perform comprehensive surveys which meet the requirements of DOE Order 5634.1B, is cost effective, and evaluates critical system elements using performance and compliance based survey techniques. The integrated survey methodology encompasses all elements of the survey process, including planning, technical evaluation, report preparation, and the survey finding tracking and validation program. Additionally, the SR survey approach has been expanded to address field verification of the Master Safeguards and Security Agreement (MSSA) and Vulnerability Assessment Report (VAR) data. Performance tests (PTs) are conducted based on a review and analysis of critical paths identified in the VAR. PTs are based upon scenario-specific criteria, and comparisons of performance criteria with previously established criteria are performed and analyzed. The survey process ensures that action plans are developed by the surveyed organization to address any identified vulnerabilities

  7. ''Training plan optimized design'' methodology application to IBERDROLA - Power generation

    International Nuclear Information System (INIS)

    Gil, S.; Mendizabal, J.L.

    1996-01-01

    The trend in both Europe and the United States, towards the understanding that no training plan may be considered suitable if not backed by the results of application of the S.A.T. (Systematic Approach to Training) methodology, led TECNATOM, S.A. to apply thy methodology through development of an application specific to the conditions of the Spanish working system. The requirement that design of the training be coherent with the realities of the working environment is met by systematic application of the SAT methodology as part of the work analysis and job-based task analysis processes, this serving as a basis for design of the training plans

  8. A Systematic Methodology for Design of Emulsion Based Chemical Products

    DEFF Research Database (Denmark)

    Mattei, Michele; Kontogeorgis, Georgios; Gani, Rafiqul

    2012-01-01

    a hierarchical approach starting with the identification of the needs to be satisfied by the emulsified product and then building up the formulation by adding one-by-one the different classes of chemicals. A structured database together with dedicated property prediction models and evaluation criteria......A systematic methodology for emulsion based chemical product design is presented. The methodology employs a model-based product synthesis/design stage and a modelexperiment based further refinement and/or validation stage. In this paper only the first stage is presented. The methodology employs...

  9. A methodology for designing flexible multi-generation systems

    DEFF Research Database (Denmark)

    Lythcke-Jørgensen, Christoffer Ernst; Viana Ensinas, Adriano; Münster, Marie

    2016-01-01

    - and energy-efficient way, thereby playing an important part in smart energy systems. The development of efficient FMGs requires systematic optimization approaches. This study presents a novel, generic methodology for designing FMGs that facilitates quick and reliable pre-feasibility analyses. The methodology...... analysis; biomass supply chains; variable part-load performance; and multi-objective optimization considering economic and environmental performance. Tested in a case study, the methodology is proved effective in screening the solution space for efficient FMG designs, in assessing the importance...

  10. A methodology for creating ontologies for engineering design

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Kim, S.; Wallace, K.M.

    2007-01-01

    This paper describes a six-stage methodology for developing ontologies for engineering design, together with the research methods and evaluation of each stage. The methodology focuses upon understanding a user's domain models through empirical research. A case study of an ontology for searching......, indexing, and retrieving engineering knowledge is described. The root concepts of the ontology were elicited from engineering designers. Relationships between concepts are extracted as the ontology is populated. The contribution of this research is a methodology to allow researchers. and industry to create...

  11. A Rigorous Methodology for Analyzing and Designing Plug-Ins

    DEFF Research Database (Denmark)

    Fasie, Marieta V.; Haxthausen, Anne Elisabeth; Kiniry, Joseph

    2013-01-01

    Today, GUI plug-ins development is typically done in a very ad-hoc way, where developers dive directly into implementation. Without any prior analysis and design, plug-ins are often flaky, unreliable, difficult to maintain and extend with new functionality, and have inconsistent user interfaces....... This paper addresses these problems by describing a rigorous methodology for analyzing and designing plug-ins. The methodology is grounded in the Extended Business Object Notation (EBON) and covers informal analysis and design of features, GUI, actions, and scenarios, formal architecture design, including...

  12. Methodology of Global Adult Tobacco Survey (GATS), Malaysia, 2011.

    Science.gov (United States)

    Omar, Azahadi; Yusoff, Muhammad Fadhli Mohd; Hiong, Tee Guat; Aris, Tahir; Morton, Jeremy; Pujari, Sameer

    Malaysia participated in the second phase of the Global Adult Tobacco Survey (GATS) in 2011. GATS, a new component of the Global Tobacco Surveillance System, is a nationally representative household survey of adults 15 years old or above. The objectives of GATS Malaysia were to (i) systematically monitor tobacco use among adults and track key indicators of tobacco control and (ii) track the implementation of some of the Framework Convention of Tobacco Control (FCTC)-recommended demand related policies. GATS Malaysia 2011 was a nationwide cross-sectional survey using multistage stratified sampling to select 5112 nationally representative households. One individual aged 15 years or older was randomly chosen from each selected household and interviewed using handheld device. GATS Core Questionnaire with optional questions was pre-tested and uploaded into handheld devices after repeated quality control processes. Data collectors were trained through a centralized training. Manuals and picture book were prepared to aid in the training of data collectors and during data collection. Field-level data were aggregated on a daily basis and analysed twice a week. Quality controls were instituted to ensure collection of high quality data. Sample weighting and analysis were conducted with the assistance of researchers from the Centers for Disease Control and Prevention, Atlanta, USA. GATS Malaysia received a total response rate of 85.3% from 5112 adults surveyed. Majority of the respondents were 25-44 years old and Malays. The robust methodology used in the GATS Malaysia provides national estimates for tobacco used classified by socio-demographic characteristics and reliable data on various dimensions of tobacco control.

  13. Solid lubrication design methodology, phase 2

    Science.gov (United States)

    Pallini, R. A.; Wedeven, L. D.; Ragen, M. A.; Aggarwal, B. B.

    1986-01-01

    The high temperature performance of solid lubricated rolling elements was conducted with a specially designed traction (friction) test apparatus. Graphite lubricants containing three additives (silver, phosphate glass, and zinc orthophosphate) were evaluated from room temperature to 540 C. Two hard coats were also evaluated. The evaluation of these lubricants, using a burnishing method of application, shows a reasonable transfer of lubricant and wear protection for short duration testing except in the 200 C temperature range. The graphite lubricants containing silver and zinc orthophosphate additives were more effective than the phosphate glass material over the test conditions examined. Traction coefficients ranged from a low of 0.07 to a high of 0.6. By curve fitting the traction data, empirical equations for slope and maximum traction coefficient as a function of contact pressure (P), rolling speed (U), and temperature (T) can be developed for each lubricant. A solid lubricant traction model was incorporated into an advanced bearing analysis code (SHABERTH). For comparison purposes, preliminary heat generation calculations were made for both oil and solid lubricated bearing operation. A preliminary analysis indicated a significantly higher heat generation for a solid lubricated ball bearing in a deep groove configuration. An analysis of a cylindrical roller bearing configuration showed a potential for a low friction solid lubricated bearing.

  14. Digital methodologies for surveying and enhancement of hypogeous cultural heritage

    Directory of Open Access Journals (Sweden)

    Cettina Santagati

    2014-05-01

    Full Text Available The study addresses the problems of acquisition and enhancement in the field of underground sites with particular regard to the Catacomb of St. John in Syracuse. In addition to the proposed survey methodology, the research highlightes that only through a reliable and objective documentation you can understand and study in depth these places. 3D documentation of these places hidden from the eyes of the city and, therefore, very complex to interpret has provided a powerful tool for investigation as it has allowed to show the relationships between the plano-altimetric environments and to study from a geometrical point of view the spatiality of these places providing new and valuable information to scholars of the monument.

  15. Methodology of estimating restraint use in children: roadside observation or parking lot interview survey.

    Science.gov (United States)

    Snowdon, Anne; Rothman, Linda; Slater, Morgan; Kolga, Carol; Hussein, Abdul; Boase, Paul; Howard, Andrew

    2010-11-01

    To compare the differences in Canadian national estimates of correct child restraint use obtained using the standard roadside observation method compared to a detailed parking lot interview. A multi-stage stratified survey design was used to conduct roadside observational and interview data collection at 182 randomly selected sites across Canada. For each site, a roadside intersection location and a parking lot location were used for the roadside observational survey and the interview respectively. Weighted estimates of correct restraint use from both locations were compared. Estimates of correct restraint use were significantly higher for all children under the age of 9 in the parking lot sample. The largest discrepancy between the two samples was in booster seat aged children (ages 4-8) where 29.1% versus 67.8% of children were observed to be correctly restrained using the roadside and the parking lot methodology respectively. There was a 67% participation refusal rate in the parking lot survey. There are specific advantages and limitations to both survey designs. The purpose of the data collection must be considered when selecting the methodology. Parking lot surveys provide richer data regarding restraint use/misuse. Estimates of correct restraint use must be approached with caution due to the effect of consent bias resulting in over inflation of estimates. Roadside observation is adequate and appropriate for providing national estimates of correct restraint use. 2010 Elsevier Ltd. All rights reserved.

  16. Design Process-System and Methodology of Design Research

    Science.gov (United States)

    Bashier, Fathi

    2017-10-01

    Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

  17. Using proliferation assessment methodologies for Safeguards-by-Design

    International Nuclear Information System (INIS)

    Van der Meer, K.; Rossa, R.; Turcanu, C.; Borella, A.

    2013-01-01

    MYRRHA, an accelerator driven system (ADS) is designed as a proton accelerator coupled to a liquid Pb-Bi spallation target, surrounded by a Pb-Bi cooled sub-critical neutron multiplying medium in a pool type configuration. An assessment based on three methodologies was made of the proliferation risks of the MYRRHA ADS in comparison with the BR2 MTR, an existing research reactor at the Belgian Nuclear Research Centre SCK-CEN. The used methodologies were the TOPS (Technical Opportunities to Increase the Proliferation Resistance of Nuclear Power Systems), the PR-PP and the INPRO methodologies. The various features of the methodologies are described and the results of the assessments are given and discussed. It is concluded that it would be useful to define one single methodology with two options to perform a quick and a more detailed assessment. The paper is followed by the slides of the presentation

  18. Topics in expert system design methodologies and tools

    CERN Document Server

    Tasso, C

    1989-01-01

    Expert Systems are so far the most promising achievement of artificial intelligence research. Decision making, planning, design, control, supervision and diagnosis are areas where they are showing great potential. However, the establishment of expert system technology and its actual industrial impact are still limited by the lack of a sound, general and reliable design and construction methodology.This book has a dual purpose: to offer concrete guidelines and tools to the designers of expert systems, and to promote basic and applied research on methodologies and tools. It is a coordinated coll

  19. Optimal Design and Purposeful Sampling: Complementary Methodologies for Implementation Research.

    Science.gov (United States)

    Duan, Naihua; Bhaumik, Dulal K; Palinkas, Lawrence A; Hoagwood, Kimberly

    2015-09-01

    Optimal design has been an under-utilized methodology. However, it has significant real-world applications, particularly in mixed methods implementation research. We review the concept and demonstrate how it can be used to assess the sensitivity of design decisions and balance competing needs. For observational studies, this methodology enables selection of the most informative study units. For experimental studies, it entails selecting and assigning study units to intervention conditions in the most informative manner. We blend optimal design methods with purposeful sampling to show how these two concepts balance competing needs when there are multiple study aims, a common situation in implementation research.

  20. Design Science Methodology Applied to a Chemical Surveillance Tool

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Zhuanyi; Han, Kyungsik; Charles-Smith, Lauren E.; Henry, Michael J.

    2017-05-11

    Public health surveillance systems gain significant benefits from integrating existing early incident detection systems,supported by closed data sources, with open source data.However, identifying potential alerting incidents relies on finding accurate, reliable sources and presenting the high volume of data in a way that increases analysts work efficiency; a challenge for any system that leverages open source data. In this paper, we present the design concept and the applied design science research methodology of ChemVeillance, a chemical analyst surveillance system.Our work portrays a system design and approach that translates theoretical methodology into practice creating a powerful surveillance system built for specific use cases.Researchers, designers, developers, and related professionals in the health surveillance community can build upon the principles and methodology described here to enhance and broaden current surveillance systems leading to improved situational awareness based on a robust integrated early warning system.

  1. Methodological Innovation in Practice-Based Design Doctorates

    Science.gov (United States)

    Yee, Joyce S. R.

    2010-01-01

    This article presents a selective review of recent design PhDs that identify and analyse the methodological innovation that is occurring in the field, in order to inform future provision of research training. Six recently completed design PhDs are used to highlight possible philosophical and practical models that can be adopted by future PhD…

  2. Design methodology to enhance high impedance surfaces performances

    Directory of Open Access Journals (Sweden)

    M. Grelier

    2014-04-01

    Full Text Available A methodology is introduced for designing wideband, compact and ultra-thin high impedance surfaces (HIS. A parametric study is carried out to examine the effect of the periodicity on the electromagnetic properties of an HIS. This approach allows designers to reach the best trade-off for HIS performances.

  3. Potential of conceptual design methodology for food process innovation

    NARCIS (Netherlands)

    Hadiyanto, M.; Straten, van G.; Boom, R.M.; Boxtel, van A.J.B.; Esveld, D.C.

    2008-01-01

    The available time span for food product and process innovation is steadily decreasing, and to increase the efficacy of the development cycles, systematic design procedures can be used to develop new and to redesign existing processes. The Conceptual Process Design (CPD) methodologies used in

  4. [Strengthening the methodology of study designs in scientific researches].

    Science.gov (United States)

    Ren, Ze-qin

    2010-06-01

    Many problems in study designs have affected the validity of scientific researches seriously. We must understand the methodology of research, especially clinical epidemiology and biostatistics, and recognize the urgency in selection and implement of right study design. Thereafter we can promote the research capability and improve the overall quality of scientific researches.

  5. Enhancing Instructional Design Efficiency: Methodologies Employed by Instructional Designers

    Science.gov (United States)

    Roytek, Margaret A.

    2010-01-01

    Instructional systems design (ISD) has been frequently criticised as taking too long to implement, calling for a reduction in cycle time--the time that elapses between project initiation and delivery. While instructional design research has historically focused on increasing "learner" efficiencies, the study of what instructional designers do to…

  6. Concept Generation for Design Creativity A Systematized Theory and Methodology

    CERN Document Server

    Taura, Toshiharu

    2013-01-01

    The concept generation process seems like an intuitional thought: difficult to capture and perform, although everyone is capable of it. It is not an analytical process but a synthetic process which has yet to be clarified. Furthermore, new research methods for investigating the concept generation process—a very difficult task since the concept generation process is driven by inner feelings deeply etched in the mind—are necessary to establish its theory and methodology.  Concept Generation for Design Creativity—A Systematized Theory and Methodology presents the concept generation process both theoretically and methodologically. Theoretically, the concept generation process is discussed by comparing metaphor, abduction, and General Design Theory from the perspective of similarities and dissimilarities. Property mapping, concept blending, and concept integration in thematic relation have been explained methodologically. So far, these theories and methods have been discussed independently, and the relation...

  7. An intelligent design methodology for nuclear power systems

    International Nuclear Information System (INIS)

    Nassersharif, B.; Martin, R.P.; Portal, M.G.; Gaeta, M.J.

    1989-01-01

    The goal of this investigation is to research possible methodologies into automating the design of, specifically, nuclear power facilities; however, it is relevant to all thermal power systems. The strategy of this research has been to concentrate on individual areas of the thermal design process, investigate procedures performed, develop methodology to emulate that behavior, and prototype it in the form of a computer program. The design process has been generalized as follows: problem definition, design definition, component selection procedure, optimization and engineering analysis, testing and final design with the problem definition defining constraints that will be applied to the selection procedure as well as design definition. The result of this research is a prototype computer program applying an original procedure for the selection of the best set of real components that would be used in constructing a system with desired performance characteristics. The mathematical model used for the selection procedure is possibility theory

  8. A design methodology for materials control and accounting information systems

    International Nuclear Information System (INIS)

    Helman, P.; Strittmatter, R.B.

    1987-01-01

    Modern approaches to nuclear materials safeguards have significantly increased the data processing needs of safeguards information systems. Implementing these approaches will require developing efficient, cost-effective designs. Guided by database design research, we are developing a design methodology for distributed materials control and accounting (MCandA) information systems. The methodology considers four design parameters: network topology, allocation of data to nodes, high-level global processing strategy, and local file structures to optimize system performance. Characteristics of system performance that are optimized are response time for an operation, timeliness of data, validity of data, and reliability. The ultimate goal of the research is to develop a comprehensive computerized design tool specifically tailored to the design of MCandA systems

  9. Design of Sustainable Blended Products using an Integrated Methodology

    DEFF Research Database (Denmark)

    Yunus, Nor Alafiza Binti; Gernaey, Krist; Woodley, John

    2013-01-01

    This paper presents a systematic methodology for designing blended products consisting of three stages; product design, process identification and experimental verification. The product design stage is considered in this paper. The objective of this stage is to screen and select suitable chemicals...... to be used as building blocks in the mixture design, and then to propose the blend formulations that fulfill the desired product attributes. The result is a set of blends that match the constraints, the compositions, values of the target properties and information about their miscibility. The methodology has...... been applied to design several blended products. A case study on design of blended lubricants is highlighted. The objective is to identify blended products that satisfy the product attributes with at least similar or better performance compared to conventional products....

  10. Critical Race Design: An Emerging Methodological Approach to Anti-Racist Design and Implementation Research

    Science.gov (United States)

    Khalil, Deena; Kier, Meredith

    2017-01-01

    This article is about introducing Critical Race Design (CRD), a research methodology that centers race and equity at the nucleus of educational opportunities by design. First, the authors define design-based implementation research (DBIR; Penuel, Fishman, Cheng, & Sabelli, 2011) as an equity-oriented education research methodology where…

  11. National and Regional Surveys of Radon Concentration in Dwellings. Review of Methodology and Measurement Techniques

    International Nuclear Information System (INIS)

    2013-01-01

    Reliable, comparable and 'fit for purpose' results are essential requirements for any decision based on analytical measurements. For the analyst, the availability of tested and validated sampling and analytical procedures is an extremely important tool for carrying out such measurements. For maximum utility, such procedures should be comprehensive, clearly formulated and readily available to both the analyst and the customer for reference. In the specific case of radon surveys, it is very important to design a survey in such a way as to obtain results that can reasonably be considered representative of a population. Since 2004, the Environment Programme of the IAEA has included activities aimed at the development of a set of procedures for the measurement of radionuclides in terrestrial environmental samples. The development of radon measurement procedures for national and regional surveys started with the collection and review of more than 160 relevant scientific papers. On the basis of this review, this publication summarizes the methodology and the measurement techniques suitable for a population representative national or regional survey on radon concentration in the indoor air of dwellings. The main elements of the survey design are described and discussed, such as the sampling scheme, the protocols, the questionnaire and the data analysis, with particular attention to the potential biases that can affect the representativeness of the results. Moreover, the main measurement techniques suitable for national surveys on indoor radon are reviewed, with particular attention to the elements that can affect the precision and accuracy of the results

  12. An investigation into creative design methodologies for textiles and fashion

    Science.gov (United States)

    Gault, Alison

    2017-10-01

    Understanding market intelligence, trends, influences and personal approaches are essential tools for design students to develop their ideas in textiles and fashion. Identifying different personal approaches including, visual, process-led or concept by employing creative methodologies are key to developing a brief. A series of ideas or themes start to emerge and through the design process serve to underpin and inform an entire collection. These investigations ensure that the design collections are able to produce a diverse range of outcomes. Following key structures and coherent stages in the design process creates authentic collections in textiles and fashion. A range of undergraduate students presented their design portfolios (180) and the methodologies employed were mapped against success at module level, industry response and graduate employment.

  13. Survey of systematic review authors in dentistry: challenges in methodology and reporting.

    Science.gov (United States)

    Major, Michael P; Warren, Sharon; Flores-Mir, Carlos

    2009-04-01

    The study reported in this article had three objectives: 1) identify the challenges faced by authors of dental systematic reviews (SR) during the process of literature search and selection; 2) determine whether dental SR authors' responses to survey questions about their study methodology were consistent with the reported published methodology; and 3) assess whether dental SR authors' evidence-based publication experience was associated with reported methodology. Seventy-eight authors (53 percent) of dental SRs out of 147 potential authors published from 2000 to 2006 responded to an online survey. According to the respondents, the most challenging aspects of literature search and selection were the initial design and performing extended literature searches. Agreement between the protocol identified by SR authors on the survey and the actual protocol described in their publications was fair to moderate. There were virtually no correlations between authors' publication experience, systematic review literature search, and selection thoroughness except for the number of past SRs published, and no differences in thoroughness between SRs written by clinicians (dental practitioners in the community) and dental school faculty members. Dental SR authors do not appear to fully appreciate the importance of extensive literature searches as central to the validity of their systematic review methods and potential findings.

  14. Scalable Multi-core Architectures Design Methodologies and Tools

    CERN Document Server

    Jantsch, Axel

    2012-01-01

    As Moore’s law continues to unfold, two important trends have recently emerged. First, the growth of chip capacity is translated into a corresponding increase of number of cores. Second, the parallalization of the computation and 3D integration technologies lead to distributed memory architectures. This book provides a current snapshot of industrial and academic research, conducted as part of the European FP7 MOSART project, addressing urgent challenges in many-core architectures and application mapping.  It addresses the architectural design of many core chips, memory and data management, power management, design and programming methodologies. It also describes how new techniques have been applied in various industrial case studies. Describes trends towards distributed memory architectures and distributed power management; Integrates Network on Chip with distributed, shared memory architectures; Demonstrates novel design methodologies and frameworks for multi-core design space exploration; Shows how midll...

  15. Biomimetics as a design methodology – possibilities and challenges

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2009-01-01

    Biomimetics – or bionik as it is called in parts of Europe – offer a number of promising opportunities and challenges for the designer. The paper investigates how biomimetics as a design methodology is used in engineering design by looking at examples of biological searches and highlight...... the possibilities and challenges. Biomimetics for engineering design is explored through an experiment involving 12 design engineering students. For 7 selected problem areas they searched biology literature available at a university library and identified a number of biological solutions. Central solution...... principles were formulated and used for designing technical items that could be used to solve the initial problems. Experiences are that biomimetic design can be made successfully using commonly available biological literature and internet resources and that designers without detailed biological knowledge...

  16. National survey of drinking and driving attitudes and behaviors : 2008. Volume 3, methodology report

    Science.gov (United States)

    2010-08-01

    This report presents the details of the methodology used for the 2008 National Survey of Drinking and Driving Attitudes and Behaviors conducted by Gallup, Inc. for : the National Highway Traffic Safety Administration (NHTSA). This survey represents t...

  17. International conference on research methodology for roadside surveys of drinking-driving : alcohol countermeasures workshop

    Science.gov (United States)

    1974-09-01

    The basic purpose [of the conference] was to encourage more roadside surveys by furthering the research methodology and recommendations for conducting roadside surveys developed by a special group of the Organization for Economic Cooperation and Deve...

  18. Design of Sustainable Blended Products using an Integrated Methodology

    DEFF Research Database (Denmark)

    Yunus, Nor Alafiza Binti; Gernaey, Krist; Woodley, John

    2013-01-01

    to be used as building blocks in the mixture design, and then to propose the blend formulations that fulfill the desired product attributes. The result is a set of blends that match the constraints, the compositions, values of the target properties and information about their miscibility. The methodology has...

  19. Design methodology for trailing-edge high-lift mechanisms

    NARCIS (Netherlands)

    Zaccai, D; Bertels, F.G.A.; Vos, R.

    2016-01-01

    A new methodology has been developed that integrates the preliminary wing design with trailing edge high-lift systems and accounts for three-dimensional flap kinematics. The high-lift system in the developed application includes the kinematic synthesis of four common mechanisms (dropped-hinge,

  20. Viability, Advantages and Design Methodologies of M-Learning Delivery

    Science.gov (United States)

    Zabel, Todd W.

    2010-01-01

    The purpose of this study was to examine the viability and principle design methodologies of Mobile Learning models in developing regions. Demographic and market studies were utilized to determine the viability of M-Learning delivery as well as best uses for such technologies and methods given socioeconomic and political conditions within the…

  1. A computer simulator for development of engineering system design methodologies

    Science.gov (United States)

    Padula, S. L.; Sobieszczanski-Sobieski, J.

    1987-01-01

    A computer program designed to simulate and improve engineering system design methodology is described. The simulator mimics the qualitative behavior and data couplings occurring among the subsystems of a complex engineering system. It eliminates the engineering analyses in the subsystems by replacing them with judiciously chosen analytical functions. With the cost of analysis eliminated, the simulator is used for experimentation with a large variety of candidate algorithms for multilevel design optimization to choose the best ones for the actual application. Thus, the simulator serves as a development tool for multilevel design optimization strategy. The simulator concept, implementation, and status are described and illustrated with examples.

  2. Tornado missile simulation and design methodology. Volume 1: simulation methodology, design applications, and TORMIS computer code. Final report

    International Nuclear Information System (INIS)

    Twisdale, L.A.; Dunn, W.L.

    1981-08-01

    A probabilistic methodology has been developed to predict the probabilities of tornado-propelled missiles impacting and damaging nuclear power plant structures. Mathematical models of each event in the tornado missile hazard have been developed and sequenced to form an integrated, time-history simulation methodology. The models are data based where feasible. The data include documented records of tornado occurrence, field observations of missile transport, results of wind tunnel experiments, and missile impact tests. Probabilistic Monte Carlo techniques are used to estimate the risk probabilities. The methodology has been encoded in the TORMIS computer code to facilitate numerical analysis and plant-specific tornado missile probability assessments. Sensitivity analyses have been performed on both the individual models and the integrated methodology, and risk has been assessed for a hypothetical nuclear power plant design case study

  3. FOREWORD: Computational methodologies for designing materials Computational methodologies for designing materials

    Science.gov (United States)

    Rahman, Talat S.

    2009-02-01

    It would be fair to say that in the past few decades, theory and computer modeling have played a major role in elucidating the microscopic factors that dictate the properties of functional novel materials. Together with advances in experimental techniques, theoretical methods are becoming increasingly capable of predicting properties of materials at different length scales, thereby bringing in sight the long-sought goal of designing material properties according to need. Advances in computer technology and their availability at a reasonable cost around the world have made tit all the more urgent to disseminate what is now known about these modern computational techniques. In this special issue on computational methodologies for materials by design we have tried to solicit articles from authors whose works collectively represent the microcosm of developments in the area. This turned out to be a difficult task for a variety of reasons, not the least of which is space limitation in this special issue. Nevertheless, we gathered twenty articles that represent some of the important directions in which theory and modeling are proceeding in the general effort to capture the ability to produce materials by design. The majority of papers presented here focus on technique developments that are expected to uncover further the fundamental processes responsible for material properties, and for their growth modes and morphological evolutions. As for material properties, some of the articles here address the challenges that continue to emerge from attempts at accurate descriptions of magnetic properties, of electronically excited states, and of sparse matter, all of which demand new looks at density functional theory (DFT). I should hasten to add that much of the success in accurate computational modeling of materials emanates from the remarkable predictive power of DFT, without which we would not be able to place the subject on firm theoretical grounds. As we know and will also

  4. Model-based Organization Manning, Strategy, and Structure Design via Team Optimal Design (TOD) Methodology

    National Research Council Canada - National Science Library

    Levchuk, Georgiy; Chopra, Kari; Paley, Michael; Levchuk, Yuri; Clark, David

    2005-01-01

    This paper describes a quantitative Team Optimal Design (TOD) methodology and its application to the design of optimized manning for E-10 Multi-sensor Command and Control Aircraft. The E-10 (USAF, 2002...

  5. Survey of Transmission Cost Allocation Methodologies for Regional Transmission Organizations

    Energy Technology Data Exchange (ETDEWEB)

    Fink, S.; Porter, K.; Mudd, C.; Rogers, J.

    2011-02-01

    The report presents transmission cost allocation methodologies for reliability transmission projects, generation interconnection, and economic transmission projects for all Regional Transmission Organizations.

  6. Metamodels for Computer-Based Engineering Design: Survey and Recommendations

    Science.gov (United States)

    Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

    1997-01-01

    The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

  7. Computer aided die design: A new open-source methodology

    Science.gov (United States)

    Carneiro, Olga Sousa; Rajkumar, Ananth; Ferrás, Luís Lima; Fernandes, Célio; Sacramento, Alberto; Nóbrega, João Miguel

    2017-05-01

    In this work we present a detailed description of how to use open source based computer codes to aid the design of complex profile extrusion dies, aiming to improve its flow distribution. The work encompasses the description of the overall open-source die design methodology, the implementation of the energy conservation equation in an existing OpenFOAM® solver, which will be then capable of simulating the steady non-isothermal flow of an incompressible generalized Newtonian fluid, and two case studies to illustrate the capabilities and practical usefulness of the developed methodology. The results obtained with these case studies, used to solve real industrial problems, demonstrate that the computational design aid is an excellent alternative, from economical and technical points of view, to the experimental trial-and-error procedure commonly used in industry.

  8. A design methodology of microgrids for noninterconnected zones of Colombia

    Directory of Open Access Journals (Sweden)

    Juan D. Garzón-Hidalgo

    2017-05-01

    Full Text Available A methodology for microgrids design in non-interconnected zones of Colombia is proposed in this paper. The microgrid design is carried out following the Colombian electrical normativity. The stages of the methodology are: collection of the field information, evaluation of renewable and nonrenewable resources, load profile estimation, sizing of the generators, design of microgrid topology, and electrical analysis. The size of conductors is selected according to NTC 2050. A study case is presented, where the region of Taroa, in the Department of Guajira, is selected. Taroa is located in a not interconnected zone of Colombia. From meteorological information of the zone and the load analysis, the generation equipment is selected using the software HOMER. The voltages on the microgrid are computed applying power flow analysis using the software Power System Analysis Toolbox. The generators are represented with reduced models to streamline the design. The voltage variations in the buses of the designed microgrid are in the 3% of the nominal voltage. This variation range is defined in Reglamento Técnico de Instalaciones Eléctricas (RETIE. Simulation results, using actual data, assess the feasibility of the proposed methodology.

  9. A study on the advanced statistical core thermal design methodology

    International Nuclear Information System (INIS)

    Lee, Seung Hyuk

    1992-02-01

    A statistical core thermal design methodology for generating the limit DNBR and the nominal DNBR is proposed and used in assessing the best-estimate thermal margin in a reactor core. Firstly, the Latin Hypercube Sampling Method instead of the conventional Experimental Design Technique is utilized as an input sampling method for a regression analysis to evaluate its sampling efficiency. Secondly and as a main topic, the Modified Latin Hypercube Sampling and the Hypothesis Test Statistics method is proposed as a substitute for the current statistical core thermal design method. This new methodology adopts 'a Modified Latin Hypercube Sampling Method' which uses the mean values of each interval of input variables instead of random values to avoid the extreme cases that arise in the tail areas of some parameters. Next, the independence between the input variables is verified through 'Correlation Coefficient Test' for statistical treatment of their uncertainties. And the distribution type of DNBR response is determined though 'Goodness of Fit Test'. Finally, the limit DNBR with one-sided 95% probability and 95% confidence level, DNBR 95/95 ' is estimated. The advantage of this methodology over the conventional statistical method using Response Surface and Monte Carlo simulation technique lies in its simplicity of the analysis procedure, while maintaining the same level of confidence in the limit DNBR result. This methodology is applied to the two cases of DNBR margin calculation. The first case is the application to the determination of the limit DNBR where the DNBR margin is determined by the difference between the nominal DNBR and the limit DNBR. The second case is the application to the determination of the nominal DNBR where the DNBR margin is determined by the difference between the lower limit value of the nominal DNBR and the CHF correlation limit being used. From this study, it is deduced that the proposed methodology gives a good agreement in the DNBR results

  10. Reflections on International Comparative Education Survey Methodology: A Case Study of the European Survey on Language Competences

    Science.gov (United States)

    Ashton, Karen

    2016-01-01

    This paper reflects on the methodology used in international comparative education surveys by conducting a systematic review of the European Survey on Language Competences (ESLC). The ESLC was administered from February to March 2011, with final results released in June 2012. The survey tested approximately 55,000 students across 14 European…

  11. Core design methodology and software for Temelin NPP

    International Nuclear Information System (INIS)

    Havluj, F; Hejzlar, J.; Klouzal, J.; Stary, V.; Vocka, R.

    2011-01-01

    In the frame of the process of fuel vendor change at Temelin NPP in the Czech Republic, where, starting since 2010, TVEL TVSA-T fuel is loaded instead of Westinghouse VVANTAGE-6 fuel, new methodologies for core design and core reload safety evaluation have been developed. These documents are based on the methodologies delivered by TVEL within the fuel contract, and they were further adapted according to Temelin NPP operational needs and according to the current practice at NPP. Along with the methodology development the 3D core analysis code ANDREA, licensed for core reload safety evaluation in 2010, have been upgraded in order to optimize the safety evaluation process. New sequences of calculations were implemented in order to simplify the evaluation of different limiting parameters and output visualization tools were developed to make the verification process user friendly. Interfaces to the fuel performance code TRANSURANUS and sub-channel analysis code SUBCAL were developed as well. (authors)

  12. Methodology is more than research design and technology.

    Science.gov (United States)

    Proctor, Robert W

    2005-05-01

    The Society for Computers in Psychology has been at the forefront of disseminating information about advances in computer technology and their applications for psychologists. Although technological advances, as well as clean research designs, are key contributors to progress in psychological research, the justification of methodological rules for interpreting data and making theory choices is at least as important. Historically, methodological beliefs and practices have been justified through intuition and logic, an approach known as foundationism. However, naturalism, a modern approach in the philosophy of science inspired by the work of Thomas S. Kuhn, indicates that all aspects of scientific practice, including its methodology, should be evaluated empirically. This article examines implications of the naturalistic approach for psychological research methods in general and for the current debate that is often framed as one of qualitative versus quantitative methods.

  13. Aerodynamic configuration design using response surface methodology analysis

    Science.gov (United States)

    Engelund, Walter C.; Stanley, Douglas O.; Lepsch, Roger A.; Mcmillin, Mark M.; Unal, Resit

    1993-01-01

    An investigation has been conducted to determine a set of optimal design parameters for a single-stage-to-orbit reentry vehicle. Several configuration geometry parameters which had a large impact on the entry vehicle flying characteristics were selected as design variables: the fuselage fineness ratio, the nose to body length ratio, the nose camber value, the wing planform area scale factor, and the wing location. The optimal geometry parameter values were chosen using a response surface methodology (RSM) technique which allowed for a minimum dry weight configuration design that met a set of aerodynamic performance constraints on the landing speed, and on the subsonic, supersonic, and hypersonic trim and stability levels. The RSM technique utilized, specifically the central composite design method, is presented, along with the general vehicle conceptual design process. Results are presented for an optimized configuration along with several design trade cases.

  14. 2007 motor vehicle occupant safety survey. Volume 1, Methodology report

    Science.gov (United States)

    2008-07-01

    The 2007 Motor Vehicle Occupant Safety Survey was the sixth in a series of periodic national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by Sc...

  15. Integral Design Methodology of Photocatalytic Reactors for Air Pollution Remediation

    Directory of Open Access Journals (Sweden)

    Claudio Passalía

    2017-06-01

    Full Text Available An integral reactor design methodology was developed to address the optimal design of photocatalytic wall reactors to be used in air pollution control. For a target pollutant to be eliminated from an air stream, the proposed methodology is initiated with a mechanistic derived reaction rate. The determination of intrinsic kinetic parameters is associated with the use of a simple geometry laboratory scale reactor, operation under kinetic control and a uniform incident radiation flux, which allows computing the local superficial rate of photon absorption. Thus, a simple model can describe the mass balance and a solution may be obtained. The kinetic parameters may be estimated by the combination of the mathematical model and the experimental results. The validated intrinsic kinetics obtained may be directly used in the scaling-up of any reactor configuration and size. The bench scale reactor may require the use of complex computational software to obtain the fields of velocity, radiation absorption and species concentration. The complete methodology was successfully applied to the elimination of airborne formaldehyde. The kinetic parameters were determined in a flat plate reactor, whilst a bench scale corrugated wall reactor was used to illustrate the scaling-up methodology. In addition, an optimal folding angle of the corrugated reactor was found using computational fluid dynamics tools.

  16. Integral Design Methodology of Photocatalytic Reactors for Air Pollution Remediation.

    Science.gov (United States)

    Passalía, Claudio; Alfano, Orlando M; Brandi, Rodolfo J

    2017-06-07

    An integral reactor design methodology was developed to address the optimal design of photocatalytic wall reactors to be used in air pollution control. For a target pollutant to be eliminated from an air stream, the proposed methodology is initiated with a mechanistic derived reaction rate. The determination of intrinsic kinetic parameters is associated with the use of a simple geometry laboratory scale reactor, operation under kinetic control and a uniform incident radiation flux, which allows computing the local superficial rate of photon absorption. Thus, a simple model can describe the mass balance and a solution may be obtained. The kinetic parameters may be estimated by the combination of the mathematical model and the experimental results. The validated intrinsic kinetics obtained may be directly used in the scaling-up of any reactor configuration and size. The bench scale reactor may require the use of complex computational software to obtain the fields of velocity, radiation absorption and species concentration. The complete methodology was successfully applied to the elimination of airborne formaldehyde. The kinetic parameters were determined in a flat plate reactor, whilst a bench scale corrugated wall reactor was used to illustrate the scaling-up methodology. In addition, an optimal folding angle of the corrugated reactor was found using computational fluid dynamics tools.

  17. New tools for evaluating LQAS survey designs.

    Science.gov (United States)

    Hund, Lauren

    2014-02-15

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

  18. An Integrated Methodology for Emulsified Formulated Product Design

    DEFF Research Database (Denmark)

    Mattei, Michele

    consists of three stages: the problem definition stage, the model - based design stage, and the experiment - based verification stage. In the probl em definition stage, the consumer needs are trans- lated into a set of target thermo - physical properties and into a list of categories of ingre- dients...... significantly reduce both time and cost connected to product development by doing only the necessary experi- ments , and ensuring chances for innovation . The main contribution of this project i s the development of an integrated methodology for the design of emulsified formulated products. The methodology...... formulation are measured by means of tailor - made exp eriments. The formulation is then validated or, if necessary, re- fined thanks to a systematic list of action. The problem definition stage relies on a robust knowledge base, which needs to system- atically generate quantitative, useful input information...

  19. A methodological approach to designing sewer system control

    DEFF Research Database (Denmark)

    Mollerup, Ane Loft

    for this thesis was therefore the wish for a methodological approach to sewer system control design. Using a case study the following research hypothesis was tested in this thesis: Using classical and modern control theory, a methodological approach can be derived for designing sewer system control. This can aid....... This was not unexpected, since the true potential of having optimisation arises, when a system has many control loops with limit-ing constraints and/or changing prioritisation between them. The results showed that for small sewer systems, where the complexity is limited, it is not necessarily the best option to implement...... generate control systems of the future that are more robust, more structured, have a better performance and are easi-er to maintain....

  20. QUALITY IMPROVEMENT IN MULTIRESPONSE EXPERIMENTS THROUGH ROBUST DESIGN METHODOLOGY

    Directory of Open Access Journals (Sweden)

    M. Shilpa

    2012-06-01

    Full Text Available Robust design methodology aims at reducing the variability in the product performance in the presence of noise factors. Experiments involving simultaneous optimization of more than one quality characteristic are known as multiresponse experiments which are used in the development and improvement of industrial processes and products. In this paper, robust design methodology is applied to optimize the process parameters during a particular operation of rotary driving shaft manufacturing process. The three important quality characteristics of the shaft considered here are of type Nominal-the-best, Smaller-the-better and Fraction defective. Simultaneous optimization of these responses is carried out by identifying the control parameters and conducting the experimentation using L9 orthogonal array.

  1. KALIMER database development (database configuration and design methodology)

    International Nuclear Information System (INIS)

    Jeong, Kwan Seong; Kwon, Young Min; Lee, Young Bum; Chang, Won Pyo; Hahn, Do Hee

    2001-10-01

    KALIMER Database is an advanced database to utilize the integration management for Liquid Metal Reactor Design Technology Development using Web Applicatins. KALIMER Design database consists of Results Database, Inter-Office Communication (IOC), and 3D CAD database, Team Cooperation system, and Reserved Documents, Results Database is a research results database during phase II for Liquid Metal Reactor Design Technology Develpment of mid-term and long-term nuclear R and D. IOC is a linkage control system inter sub project to share and integrate the research results for KALIMER. 3D CAD Database is s schematic design overview for KALIMER. Team Cooperation System is to inform team member of research cooperation and meetings. Finally, KALIMER Reserved Documents is developed to manage collected data and several documents since project accomplishment. This report describes the features of Hardware and Software and the Database Design Methodology for KALIMER

  2. An Evaluation of native harvest survey methodologies in northern Canada

    National Research Council Canada - National Science Library

    Usher, Peter J; Wise, T. F

    1985-01-01

    .... The purpose of his study is to evaluate the methodologies employed in counting and estimating Native harvests, to assess the utility of existing data, and to recommend improvements for future data...

  3. Integrating rock mechanics issues with repository design through design process principles and methodology

    International Nuclear Information System (INIS)

    Bieniawski, Z.T.

    1996-01-01

    A good designer needs not only knowledge for designing (technical know-how that is used to generate alternative design solutions) but also must have knowledge about designing (appropriate principles and systematic methodology to follow). Concepts such as open-quotes design for manufactureclose quotes or open-quotes concurrent engineeringclose quotes are widely used in the industry. In the field of rock engineering, only limited attention has been paid to the design process because design of structures in rock masses presents unique challenges to the designers as a result of the uncertainties inherent in characterization of geologic media. However, a stage has now been reached where we are be able to sufficiently characterize rock masses for engineering purposes and identify the rock mechanics issues involved but are still lacking engineering design principles and methodology to maximize our design performance. This paper discusses the principles and methodology of the engineering design process directed to integrating site characterization activities with design, construction and performance of an underground repository. Using the latest information from the Yucca Mountain Project on geology, rock mechanics and starter tunnel design, the current lack of integration is pointed out and it is shown how rock mechanics issues can be effectively interwoven with repository design through a systematic design process methodology leading to improved repository performance. In essence, the design process is seen as the use of design principles within an integrating design methodology, leading to innovative problem solving. In particular, a new concept of open-quotes Design for Constructibility and Performanceclose quotes is introduced. This is discussed with respect to ten rock mechanics issues identified for repository design and performance

  4. Refinement of Research Surveying in Software Methodologies by Analogy: finding your patch

    Directory of Open Access Journals (Sweden)

    Eugene Doroshenko

    1999-05-01

    Full Text Available To enhance research surveying in software methodologies, a model is introduced that can indicate field maturity based on vocabulary and relevant literature. This model is developed by drawing analogies with software methodologies. Two analogies are used: software models and software life cycles or processes. How this model can reduce research surveying problems for researchers is described using extracts from application results as examples. Although the model does support research surveying activities, it cannot choose the subject for the researcher.

  5. Towards a Design Methodology for More supporting an inclusive design attitude in the built environment

    OpenAIRE

    IELEGEMS, Elke; HERSSENS, Jasmien; Vanrie, Jan

    2014-01-01

    The social, academic and political field embraces Design for All (DfA), Universal Design (UD) or Inclusive Design (ID) more and more as a global strategy to help formulating answers towards a more inclusive and sustainable world. The ageing population as well as the search for social relevant design, result in an increasing need for design methods and supportive design methodologies. While theoretical studies and knowledge in DfA are growing, the need for more insights ...

  6. Thin Film Heat Flux Sensors: Design and Methodology

    Science.gov (United States)

    Fralick, Gustave C.; Wrbanek, John D.

    2013-01-01

    Thin Film Heat Flux Sensors: Design and Methodology: (1) Heat flux is one of a number of parameters, together with pressure, temperature, flow, etc. of interest to engine designers and fluid dynamists, (2) The measurement of heat flux is of interest in directly determining the cooling requirements of hot section blades and vanes, and (3)In addition, if the surface and gas temperatures are known, the measurement of heat flux provides a value for the convective heat transfer coefficient that can be compared with the value provided by CFD codes.

  7. When Playing Meets Learning: Methodological Framework for Designing Educational Games

    Science.gov (United States)

    Linek, Stephanie B.; Schwarz, Daniel; Bopp, Matthias; Albert, Dietrich

    Game-based learning builds upon the idea of using the motivational potential of video games in the educational context. Thus, the design of educational games has to address optimizing enjoyment as well as optimizing learning. Within the EC-project ELEKTRA a methodological framework for the conceptual design of educational games was developed. Thereby state-of-the-art psycho-pedagogical approaches were combined with insights of media-psychology as well as with best-practice game design. This science-based interdisciplinary approach was enriched by enclosed empirical research to answer open questions on educational game-design. Additionally, several evaluation-cycles were implemented to achieve further improvements. The psycho-pedagogical core of the methodology can be summarized by the ELEKTRA's 4Ms: Macroadaptivity, Microadaptivity, Metacognition, and Motivation. The conceptual framework is structured in eight phases which have several interconnections and feedback-cycles that enable a close interdisciplinary collaboration between game design, pedagogy, cognitive science and media psychology.

  8. Design and analysis of sustainable computer mouse using design for disassembly methodology

    Science.gov (United States)

    Roni Sahroni, Taufik; Fitri Sukarman, Ahmad; Agung Mahardini, Karunia

    2017-12-01

    This paper presents the design and analysis of computer mouse using Design for Disassembly methodology. Basically, the existing computer mouse model consist a number of unnecessary part that cause the assembly and disassembly time in production. The objective of this project is to design a new computer mouse based on Design for Disassembly (DFD) methodology. The main methodology of this paper was proposed from sketch generation, concept selection, and concept scoring. Based on the design screening, design concept B was selected for further analysis. New design of computer mouse is proposed using fastening system. Furthermore, three materials of ABS, Polycarbonate, and PE high density were prepared to determine the environmental impact category. Sustainable analysis was conducted using software SolidWorks. As a result, PE High Density gives the lowers amount in the environmental category with great maximum stress value.

  9. A Design Science Research Methodology for Expert Systems Development

    Directory of Open Access Journals (Sweden)

    Shah Jahan Miah

    2016-11-01

    Full Text Available The knowledge of design science research (DSR can have applications for improving expert systems (ES development research. Although significant progress of utilising DSR has been observed in particular information systems design – such as decision support systems (DSS studies – only rare attempts can be found in the ES design literature. Therefore, the aim of this study is to investigate the use of DSR for ES design. First, we explore the ES development literature to reveal the presence of DSR as a research methodology. For this, we select relevant literature criteria and apply a qualitative content analysis in order to generate themes inductively to match the DSR components. Second, utilising the findings of the comparison, we determine a new DSR approach for designing a specific ES that is guided by another result – the findings of a content analysis of examination scripts in Mathematics. The specific ES artefact for a case demonstration is designed for addressing the requirement of a ‘wicked’ problem in that the key purpose is to assist human assessors when evaluating multi-step question (MSQ solutions. It is anticipated that the proposed design knowledge, in terms of both problem class and functions of ES artefacts, will help ES designers and researchers to address similar issues for designing information system solutions.

  10. Comparing econometric and survey-based methodologies in measuring offshoring

    DEFF Research Database (Denmark)

    Refslund, Bjarke

    2016-01-01

    such as the national or regional level. Most macro analyses are based on proxies and trade statistics with limitations. Drawing on unique Danish survey data, this article demonstrates how survey data can provide important insights into the national scale and impacts of offshoring, including changes of employment...

  11. Integration of process design and controller design for chemical processes using model-based methodology

    DEFF Research Database (Denmark)

    Abd.Hamid, Mohd-Kamaruddin; Sin, Gürkan; Gani, Rafiqul

    2010-01-01

    In this paper, a novel systematic model-based methodology for performing integrated process design and controller design (IPDC) for chemical processes is presented. The methodology uses a decomposition method to solve the IPDC typically formulated as a mathematical programming (optimization with ...... that satisfy design, control and cost criteria. The advantage of the proposed methodology is that it is systematic, makes use of thermodynamic-process knowledge and provides valuable insights to the solution of IPDC problems in chemical engineering practice.......In this paper, a novel systematic model-based methodology for performing integrated process design and controller design (IPDC) for chemical processes is presented. The methodology uses a decomposition method to solve the IPDC typically formulated as a mathematical programming (optimization...... with constraints) problem. Accordingly the optimization problem is decomposed into four sub-problems: (i) pre-analysis, (ii) design analysis, (iii) controller design analysis, and (iv) final selection and verification, which are relatively easier to solve. The methodology makes use of thermodynamic-process...

  12. A Survey of WEC Reliability, Survival and Design Practices

    Directory of Open Access Journals (Sweden)

    Ryan G. Coe

    2017-12-01

    Full Text Available A wave energy converter must be designed to survive and function efficiently, often in highly energetic ocean environments. This represents a challenging engineering problem, comprising systematic failure mode analysis, environmental characterization, modeling, experimental testing, fatigue and extreme response analysis. While, when compared with other ocean systems such as ships and offshore platforms, there is relatively little experience in wave energy converter design, a great deal of recent work has been done within these various areas. This paper summarizes the general stages and workflow for wave energy converter design, relying on supporting articles to provide insight. By surveying published work on wave energy converter survival and design response analyses, this paper seeks to provide the reader with an understanding of the different components of this process and the range of methodologies that can be brought to bear. In this way, the reader is provided with a large set of tools to perform design response analyses on wave energy converters.

  13. Quality of survey reporting in nephrology journals: a methodologic review.

    Science.gov (United States)

    Li, Alvin Ho-Ting; Thomas, Sonia M; Farag, Alexandra; Duffett, Mark; Garg, Amit X; Naylor, Kyla L

    2014-12-05

    Survey research is an important research method used to determine individuals' attitudes, knowledge, and behaviors; however, as with other research methods, inadequate reporting threatens the validity of results. This study aimed to describe the quality of reporting of surveys published between 2001 and 2011 in the field of nephrology. The top nephrology journals were systematically reviewed (2001-2011: American Journal of Kidney Diseases, Nephrology Dialysis Transplantation, and Kidney International; 2006-2011: Clinical Journal of the American Society of Nephrology) for studies whose primary objective was to collect and report survey results. Included were nephrology journals with a heavy focus on clinical research and high impact factors. All titles and abstracts were screened in duplicate. Surveys were excluded if they were part of a multimethod study, evaluated only psychometric characteristics, or used semi-structured interviews. Information was collected on survey and respondent characteristics, questionnaire development (e.g., pilot testing), psychometric characteristics (e.g., validity and reliability), survey methods used to optimize response rate (e.g., system of multiple contacts), and response rate. After a screening of 19,970 citations, 216 full-text articles were reviewed and 102 surveys were included. Approximately 85% of studies reported a response rate. Almost half of studies (46%) discussed how they developed their questionnaire and only a quarter of studies (28%) mentioned the validity or reliability of the questionnaire. The only characteristic that improved over the years was the proportion of articles reporting missing data (2001-2004: 46.4%; 2005-2008: 61.9%; and 2009-2011: 84.8%; respectively) (Pnephrology journals remains suboptimal. In particular, reporting of the validity and reliability of the questionnaire must be improved. Guidelines to improve survey reporting and increase transparency are clearly needed. Copyright © 2014 by the

  14. Methodology for cloud-based design of robots

    Science.gov (United States)

    Ogorodnikova, O. M.; Vaganov, K. A.; Putimtsev, I. D.

    2017-09-01

    This paper presents some important results for cloud-based designing a robot arm by a group of students. Methodology for the cloud-based design was developed and used to initiate interdisciplinary project about research and development of a specific manipulator. The whole project data files were hosted by Ural Federal University data center. The 3D (three-dimensional) model of the robot arm was created using Siemens PLM software (Product Lifecycle Management) and structured as a complex mechatronics product by means of Siemens Teamcenter thin client; all processes were performed in the clouds. The robot arm was designed in purpose to load blanks up to 1 kg into the work space of the milling machine for performing student's researches.

  15. Aircraft conceptual design - an adaptable parametric sizing methodology

    Science.gov (United States)

    Coleman, Gary John, Jr.

    Aerospace is a maturing industry with successful and refined baselines which work well for traditional baseline missions, markets and technologies. However, when new markets (space tourism) or new constrains (environmental) or new technologies (composite, natural laminar flow) emerge, the conventional solution is not necessarily best for the new situation. Which begs the question "how does a design team quickly screen and compare novel solutions to conventional solutions for new aerospace challenges?" The answer is rapid and flexible conceptual design Parametric Sizing. In the product design life-cycle, parametric sizing is the first step in screening the total vehicle in terms of mission, configuration and technology to quickly assess first order design and mission sensitivities. During this phase, various missions and technologies are assessed. During this phase, the designer is identifying design solutions of concepts and configurations to meet combinations of mission and technology. This research undertaking contributes the state-of-the-art in aircraft parametric sizing through (1) development of a dedicated conceptual design process and disciplinary methods library, (2) development of a novel and robust parametric sizing process based on 'best-practice' approaches found in the process and disciplinary methods library, and (3) application of the parametric sizing process to a variety of design missions (transonic, supersonic and hypersonic transports), different configurations (tail-aft, blended wing body, strut-braced wing, hypersonic blended bodies, etc.), and different technologies (composite, natural laminar flow, thrust vectored control, etc.), in order to demonstrate the robustness of the methodology and unearth first-order design sensitivities to current and future aerospace design problems. This research undertaking demonstrates the importance of this early design step in selecting the correct combination of mission, technologies and configuration to

  16. Development and implementation of rotorcraft preliminary design methodology using multidisciplinary design optimization

    Science.gov (United States)

    Khalid, Adeel Syed

    Rotorcraft's evolution has lagged behind that of fixed-wing aircraft. One of the reasons for this gap is the absence of a formal methodology to accomplish a complete conceptual and preliminary design. Traditional rotorcraft methodologies are not only time consuming and expensive but also yield sub-optimal designs. Rotorcraft design is an excellent example of a multidisciplinary complex environment where several interdependent disciplines are involved. A formal framework is developed and implemented in this research for preliminary rotorcraft design using IPPD methodology. The design methodology consists of the product and process development cycles. In the product development loop, all the technical aspects of design are considered including the vehicle engineering, dynamic analysis, stability and control, aerodynamic performance, propulsion, transmission design, weight and balance, noise analysis and economic analysis. The design loop starts with a detailed analysis of requirements. A baseline is selected and upgrade targets are identified depending on the mission requirements. An Overall Evaluation Criterion (OEC) is developed that is used to measure the goodness of the design or to compare the design with competitors. The requirements analysis and baseline upgrade targets lead to the initial sizing and performance estimation of the new design. The digital information is then passed to disciplinary experts. This is where the detailed disciplinary analyses are performed. Information is transferred from one discipline to another as the design loop is iterated. To coordinate all the disciplines in the product development cycle, Multidisciplinary Design Optimization (MDO) techniques e.g. All At Once (AAO) and Collaborative Optimization (CO) are suggested. The methodology is implemented on a Light Turbine Training Helicopter (LTTH) design. Detailed disciplinary analyses are integrated through a common platform for efficient and centralized transfer of design

  17. The Hubble Space Telescope advanced camera for surveys coma cluster survey. I. Survey objectives and design

    NARCIS (Netherlands)

    Carter, David; Goudfrooij, Paul; Mobasher, Bahram; Ferguson, Henry C.; Puzia, Thomas H.; Aguerri, Alfonso L.; Balcells, Marc; Batcheldor, Dan; Bridges, Terry J.; Davies, Jonathan I.; Erwin, Peter; Graham, Alister W.; Guzmán, Rafael; Hammer, Derek; Hornschemeier, Ann; Hoyos, Carlos; Hudson, Michael J.; Huxor, Avon; Jogee, Shardha; Komiyama, Yutaka; Lotz, Jennifer; Lucey, John R.; Marzke, Ronald O.; Merritt, David; Miller, Bryan W.; Miller, Neal A.; Mouhcine, Mustapha; Okamura, Sadanori; Peletier, Reynier F.; Phillipps, Steven; Poggianti, Bianca M.; Sharples, Ray M.; Smith, Russell J.; Trentham, Neil; Tully, R. Brent; Valentijn, Edwin; Verdoes Kleijn, Gijs

    2008-01-01

    We describe the HST ACS Coma Cluster Treasury survey, a deep two-passband imaging survey of one of the nearest rich clusters of galaxies, the Coma Cluster (Abell 1656). The survey was designed to cover an area of 740 arcmin2 in regions of different density of both galaxies and intergalactic medium

  18. Methodology for the design of diagnostic windows for Tore Supra

    International Nuclear Information System (INIS)

    Missirlian, Marc; Lipa, M.; Portafaix, C.; Gil, C.; Rey, G.

    2003-01-01

    The next generation of fusion experiments will operate for much longer pulse lengths within a context of high power density, introducing several new requirements for diagnostics compared with existing experiments. In this context, the upgrade of Tore Supra (CIEL Project) foresees high power and high radiating plasma scenario during very long pulse operation. This long plasma operation imposes the improvement of diagnostic systems and the design of thermally resistant in-vessel components with reliable window assemblies. Hence, the specific requirements and the methodology adopted to design Tore Supra/CIEL (TS) high thermal loaded diagnostic windows are summarised in this paper. Thermal and mechanical analyses are reported for different window materials and assembling methods

  19. Design Methodology And Performance Studies Of A Flexible Electrotextile Surface

    Directory of Open Access Journals (Sweden)

    Kayacan Ozan

    2015-09-01

    Full Text Available ‘The smart textiles’ concept has to develop products based not only on design, fashion and comfort but also in terms of functions. The novel electro-textiles in the market open up new trends in smart and interactive gadgets. ‘Easy to care and durability’ properties are among the most important features of these products. On the other hand, wearable electronic knitwear has been gaining the attention of both researchers and industrial sectors. Combining knitting technology with electronics may become a dominant trend in the future because of the wide application possibilities. This research is concerned primarily with the design methodology of knitted fabrics containing electrically conductive textiles and especially in-use performance studies. The structural characteristics of the fabrics have been evaluated to enhance the performance properties.

  20. Fast underdetermined BSS architecture design methodology for real time applications.

    Science.gov (United States)

    Mopuri, Suresh; Reddy, P Sreenivasa; Acharyya, Amit; Naik, Ganesh R

    2015-01-01

    In this paper, we propose a high speed architecture design methodology for the Under-determined Blind Source Separation (UBSS) algorithm using our recently proposed high speed Discrete Hilbert Transform (DHT) targeting real time applications. In UBSS algorithm, unlike the typical BSS, the number of sensors are less than the number of the sources, which is of more interest in the real time applications. The DHT architecture has been implemented based on sub matrix multiplication method to compute M point DHT, which uses N point architecture recursively and where M is an integer multiples of N. The DHT architecture and state of the art architecture are coded in VHDL for 16 bit word length and ASIC implementation is carried out using UMC 90 - nm technology @V DD = 1V and @ 1MHZ clock frequency. The proposed architecture implementation and experimental comparison results show that the DHT design is two times faster than state of the art architecture.

  1. Design Evolution and Methodology for Pumpkin Super-Pressure Balloons

    Science.gov (United States)

    Farley, Rodger

    The NASA Ultra Long Duration Balloon (ULDB) program has had many technical development issues discovered and solved along its road to success as a new vehicle. It has the promise of being a sub-satellite, a means to launch up to 2700 kg to 33.5 km altitude for 100 days from a comfortable mid-latitude launch point. Current high-lift long duration ballooning is accomplished out of Antarctica with zero-pressure balloons, which cannot cope with the rigors of diurnal cycles. The ULDB design is still evolving, the product of intense analytical effort, scaled testing, improved manufacturing, and engineering intuition. The past technical problems, in particular the s-cleft deformation, their solutions, future challenges, and the methodology of pumpkin balloon design will generally be described.

  2. Designing and Specifying Mobility Within the Multiagent Systems Engineering Methodology

    National Research Council Canada - National Science Library

    Self, Athie L; DeLoach, Scott A

    2003-01-01

    .... This paper attempts to bridge the gap between current AOSE methodologies and mobile agent systems by incorporating mobility into the established Multiagent Systems Engineering (MaSE) methodology...

  3. A New Methodology of Design and Development of Serious Games

    Directory of Open Access Journals (Sweden)

    André F. S. Barbosa

    2014-01-01

    Full Text Available The development of a serious game requires perfect knowledge of the learning domain to obtain the desired results. But it is also true that this may not be enough to develop a successful serious game. First of all, the player has to feel that he is playing a game where the learning is only a consequence of the playing actions. Otherwise, the game is viewed as boring and not as a fun activity and engaging. For example, the player can catch some items in the scenario and then separate them according to its type (i.e., recycle them. Thus, the main action for player is catching the items in the scenario where the recycle action is a second action, which is viewed as a consequence of the first action. Sometimes, the game design relies on a detailed approach based on the ideas of the developers because some educational content are difficult to integrate in the games, while maintaining the fun factor in the first place. In this paper we propose a new methodology of design and development of serious games that facilitates the integration of educational contents in the games. Furthermore, we present a serious game, called “Clean World”, created using this new methodology.

  4. Survey and selection of assessment methodologies for GAVE options

    International Nuclear Information System (INIS)

    Weterings, R.

    1999-05-01

    The Dutch government is interested in the possibilities for a market introduction of new gaseous and liquid energy carriers. To this purpose the GAVE-programme was recently set up. This study is carried out within the framework of the GAVE-programme and aims at the selection of methodologies for assessing the technological, economic, ecological and social perspectives of these new energy options (so-called GAVE-options). Based on the results of these assessments the Dutch ministries of Housing, Planning and Environment (VROM) and Economic Affairs (EZ) will decide at the end of 1999 about starting demonstration projects of promising energy carriers

  5. The methodology of population surveys of headache prevalence, burden and cost

    DEFF Research Database (Denmark)

    Stovner, Lars Jacob; Al Jumah, Mohammed; Birbeck, Gretchen L

    2014-01-01

    Headache to improve and standardize methods in use for cross-sectional studies, the most important is the production of consensus-based methodological guidelines. This report describes the development of detailed principles and recommendations. For this purpose we brought together an expert consensus group...... to include experience and competence in headache epidemiology and/or epidemiology in general and drawn from all six WHO world regions. The recommendations presented are for anyone, of whatever background, with interests in designing, performing, understanding or assessing studies that measure or describe...... are, in the majority of cases, more correctly attributed to the underlying disorders. Nevertheless, the principles outlined here are relevant for epidemiological studies on secondary headaches, provided that adequate definitions can be not only given but also applied in questionnaires or other survey...

  6. A design methodology for portable software on parallel computers

    Science.gov (United States)

    Nicol, David M.; Miller, Keith W.; Chrisman, Dan A.

    1993-01-01

    This final report for research that was supported by grant number NAG-1-995 documents our progress in addressing two difficulties in parallel programming. The first difficulty is developing software that will execute quickly on a parallel computer. The second difficulty is transporting software between dissimilar parallel computers. In general, we expect that more hardware-specific information will be included in software designs for parallel computers than in designs for sequential computers. This inclusion is an instance of portability being sacrificed for high performance. New parallel computers are being introduced frequently. Trying to keep one's software on the current high performance hardware, a software developer almost continually faces yet another expensive software transportation. The problem of the proposed research is to create a design methodology that helps designers to more precisely control both portability and hardware-specific programming details. The proposed research emphasizes programming for scientific applications. We completed our study of the parallelizability of a subsystem of the NASA Earth Radiation Budget Experiment (ERBE) data processing system. This work is summarized in section two. A more detailed description is provided in Appendix A ('Programming Practices to Support Eventual Parallelism'). Mr. Chrisman, a graduate student, wrote and successfully defended a Ph.D. dissertation proposal which describes our research associated with the issues of software portability and high performance. The list of research tasks are specified in the proposal. The proposal 'A Design Methodology for Portable Software on Parallel Computers' is summarized in section three and is provided in its entirety in Appendix B. We are currently studying a proposed subsystem of the NASA Clouds and the Earth's Radiant Energy System (CERES) data processing system. This software is the proof-of-concept for the Ph.D. dissertation. We have implemented and measured

  7. Design and construction of portable survey meter

    Science.gov (United States)

    Singseeta, W.; Thong-aram, D.; Pencharee, S.

    2017-09-01

    This work was aimed to design and construction of portable survey meter for radiation dose measuring. The designed system consists of 4 main parts consisting of low voltage power supply, radiation detection, radiation measurement and data display part on android phone. The test results show that the ripple voltage of low voltage power supply is less than 1%, the maximum integral counts are found to be 104 counts per second and the maximum distance of wireless commination between the server and the client is about 10 meter. It was found that the developed system had small size and light weight for portable instrument.

  8. SSME Investment in Turbomachinery Inducer Impeller Design Tools and Methodology

    Science.gov (United States)

    Zoladz, Thomas; Mitchell, William; Lunde, Kevin

    2010-01-01

    Within the rocket engine industry, SSME turbomachines are the de facto standards of success with regard to meeting aggressive performance requirements under challenging operational environments. Over the Shuttle era, SSME has invested heavily in our national inducer impeller design infrastructure. While both low and high pressure turbopump failures/anomaly resolution efforts spurred some of these investments, the SSME program was a major benefactor of key areas of turbomachinery inducer-impeller research outside of flight manifest pressures. Over the past several decades, key turbopump internal environments have been interrogated via highly instrumented hot-fire and cold-flow testing. Likewise, SSME has sponsored the advancement of time accurate and cavitating inducer impeller computation fluid dynamics (CFD) tools. These investments together have led to a better understanding of the complex internal flow fields within aggressive high performing inducers and impellers. New design tools and methodologies have evolved which intend to provide confident blade designs which strike an appropriate balance between performance and self induced load management.

  9. The challenges facing ethnographic design research: A proposed methodological solution

    DEFF Research Database (Denmark)

    Cash, Philip; Hicks, Ben; Culley, Steve

    2009-01-01

    Central to improving and maintaining high levels of performance in emerging ethnographic design research is a fundamental requirement to address some of the problems associated with the subject. In particular seven core issues are identified and include the complexity of test development, variabi......Central to improving and maintaining high levels of performance in emerging ethnographic design research is a fundamental requirement to address some of the problems associated with the subject. In particular seven core issues are identified and include the complexity of test development......, variability of methods, resource intensiveness, subjectivity, comparability, common metrics and industrial acceptance. To address these problems this paper describes a structured methodological approach in which three main areas are proposed, the modularisation of the research process, the standardisation...... of the dataset and the stratification of the research context. The paper then examines the fundamental requirements of this scheme and how these relate to a Design Observatory approach. Following this, the proposed solution is related back to the initial problem set and potential issues are discussed. Finally...

  10. Towards a Methodology for the Design of Multimedia Public Access Interfaces.

    Science.gov (United States)

    Rowley, Jennifer

    1998-01-01

    Discussion of information systems methodologies that can contribute to interface design for public access systems covers: the systems life cycle; advantages of adopting information systems methodologies; soft systems methodologies; task-oriented approaches to user interface design; holistic design, the Star model, and prototyping; the…

  11. A Survey of Cost Estimating Methodologies for Distributed Spacecraft Missions

    Science.gov (United States)

    Foreman, Veronica L.; Le Moigne, Jacqueline; de Weck, Oliver L.

    2016-01-01

    Satellite constellations and Distributed Spacecraft Mission (DSM) architectures offer unique benefits to Earth observation scientists and unique challenges to cost estimators. The Cost and Risk (CR) module of the Tradespace Analysis Tool for Constellations (TAT-C) being developed by NASA Goddard seeks to address some of these challenges by providing a new approach to cost modeling, which aggregates existing Cost Estimating Relationships (CER) from respected sources, cost estimating best practices, and data from existing and proposed satellite designs. Cost estimation through this tool is approached from two perspectives: parametric cost estimating relationships and analogous cost estimation techniques. The dual approach utilized within the TAT-C CR module is intended to address prevailing concerns regarding early design stage cost estimates, and offer increased transparency and fidelity by offering two preliminary perspectives on mission cost. This work outlines the existing cost model, details assumptions built into the model, and explains what measures have been taken to address the particular challenges of constellation cost estimating. The risk estimation portion of the TAT-C CR module is still in development and will be presented in future work. The cost estimate produced by the CR module is not intended to be an exact mission valuation, but rather a comparative tool to assist in the exploration of the constellation design tradespace. Previous work has noted that estimating the cost of satellite constellations is difficult given that no comprehensive model for constellation cost estimation has yet been developed, and as such, quantitative assessment of multiple spacecraft missions has many remaining areas of uncertainty. By incorporating well-established CERs with preliminary approaches to approaching these uncertainties, the CR module offers more complete approach to constellation costing than has previously been available to mission architects or Earth

  12. Methodology for bioclimatic design; Metodologia para el diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Morillon Galvez, David [Instituto de Ingenieria de la UNAM, Mexico, D.F. (Mexico)

    2000-07-01

    A methodology for natural air conditioning of buildings is presented; bioclimatic architecture, in order to contribute to the suitable use of components of the building (walls, ceilings, floors, orientations, etc.) that when interacting with the environment takes advantage of it, without deterioration of the same, obtaining energy efficient designs. As well as an analysis of the elements and factors that the architecture must have to be sustainable; an adequate design to the environment, saving and efficient use of energy, the use of alternating energies by means of ecotechnologies and the self-sufficiency. [Spanish] Se presenta una metodologia para la climatizacion natural de edificios; arquitectura bioclimatica, con el objetivo de aportar al uso adecuado de componentes del edificio (muros, techos, pisos, orientaciones, etc.) que al interactuar con el ambiente tome ventaja de el, sin deterioro del mismo, logrando disenos energeticamente eficientes. Asi como un analisis de los elementos y factores que debe tener la arquitectura para ser sustentable; un diseno adecuado al ambiente, ahorro y uso eficiente de la energia, el uso de energias alternas mediante ecotecnologias y la autosuficiencia.

  13. Octopus: A Design Methodology for Motion Capture Wearables.

    Science.gov (United States)

    Marin, Javier; Blanco, Teresa; Marin, Jose J

    2017-08-15

    Human motion capture (MoCap) is widely recognised for its usefulness and application in different fields, such as health, sports, and leisure; therefore, its inclusion in current wearables (MoCap-wearables) is increasing, and it may be very useful in a context of intelligent objects interconnected with each other and to the cloud in the Internet of Things (IoT). However, capturing human movement adequately requires addressing difficult-to-satisfy requirements, which means that the applications that are possible with this technology are held back by a series of accessibility barriers, some technological and some regarding usability. To overcome these barriers and generate products with greater wearability that are more efficient and accessible, factors are compiled through a review of publications and market research. The result of this analysis is a design methodology called Octopus, which ranks these factors and schematises them. Octopus provides a tool that can help define design requirements for multidisciplinary teams, generating a common framework and offering a new method of communication between them.

  14. Octopus: A Design Methodology for Motion Capture Wearables

    Science.gov (United States)

    2017-01-01

    Human motion capture (MoCap) is widely recognised for its usefulness and application in different fields, such as health, sports, and leisure; therefore, its inclusion in current wearables (MoCap-wearables) is increasing, and it may be very useful in a context of intelligent objects interconnected with each other and to the cloud in the Internet of Things (IoT). However, capturing human movement adequately requires addressing difficult-to-satisfy requirements, which means that the applications that are possible with this technology are held back by a series of accessibility barriers, some technological and some regarding usability. To overcome these barriers and generate products with greater wearability that are more efficient and accessible, factors are compiled through a review of publications and market research. The result of this analysis is a design methodology called Octopus, which ranks these factors and schematises them. Octopus provides a tool that can help define design requirements for multidisciplinary teams, generating a common framework and offering a new method of communication between them. PMID:28809786

  15. Rehabilitation of renders of old buildings in Portugal: survey, supporting methodology proposal and case studies

    OpenAIRE

    Carvalho, Carmo Gonçalves de; Flores-Colen, Inês; Faria, Paulina

    2015-01-01

    The main purpose of the research is to present a proposal for a methodology to support the rehabilitation project of renders of old buildings in Portugal. To achieve the objective it was considered essential to define the main types of participants and aspects to integrate the proposal. The research methodology consists in an inquiry presented to professional participants in rehabilitation, a market study of materials and products available in Portugal, the design of a methodology proposal an...

  16. Supporting Space Systems Design via Systems Dependency Analysis Methodology

    Science.gov (United States)

    Guariniello, Cesare

    assess the behavior of each system based on its internal status and on the topology of its dependencies on systems connected to it. Designers and decision makers can therefore quickly analyze and explore the behavior of complex systems and evaluate different architectures under various working conditions. The methods support educated decision making both in the design and in the update process of systems architecture, reducing the need to execute extensive simulations. In particular, in the phase of concept generation and selection, the information given by the methods can be used to identify promising architectures to be further tested and improved, while discarding architectures that do not show the required level of global features. The methods, when used in conjunction with appropriate metrics, also allow for improved reliability and risk analysis, as well as for automatic scheduling and re-scheduling based on the features of the dependencies and on the accepted level of risk. This dissertation illustrates the use of the two methods in sample aerospace applications, both in the operational and in the developmental domain. The applications show how to use the developed methodology to evaluate the impact of failures, assess the criticality of systems, quantify metrics of interest, quantify the impact of delays, support informed decision making when scheduling the development of systems and evaluate the achievement of partial capabilities. A larger, well-framed case study illustrates how the Systems Operational Dependency Analysis method and the Systems Developmental Dependency Analysis method can support analysis and decision making, at the mid and high level, in the design process of architectures for the exploration of Mars. The case study also shows how the methods do not replace the classical systems engineering methodologies, but support and improve them.

  17. Design of an Integrated Methodology for Analytical Design of Complex Supply Chains

    Directory of Open Access Journals (Sweden)

    Shahid Rashid

    2012-01-01

    Full Text Available A literature review and gap analysis indentifies key limitations of industry best practice when modelling of supply chains. To address these limitations the paper reports on the conception and development of an integrated modelling methodology designed to underpin the analytical design of complex supply chains. The methodology is based upon a systematic deployment of EM, CLD, and SM techniques; the integration of which is achieved via common modelling concepts and decomposition principles. Thereby the methodology facilitates: (i graphical representation and description of key “processing”, “resourcing” and “work flow” properties of supply chain configurations; (ii behavioural exploration of currently configured supply chains, to facilitate reasoning about uncertain demand impacts on supply, make, delivery, and return processes; (iii predictive quantification about relative performances of alternative complex supply chain configurations, including risk assessments. Guidelines for the application of each step of the methodology are described. Also described are recommended data collection methods and expected modelling outcomes for each step. The methodology is being extensively case tested to quantify potential benefits & costs relative to current best industry practice. The paper reflects on preliminary benefits gained during industry based case study modelling and identifies areas of potential improvement.

  18. 1999 Survey of Spouses of Active Duty Personnel: Statistical Methodology Report

    National Research Council Canada - National Science Library

    Wright, Laverne

    2001-01-01

    This report describes the sampling design, sample selection, estimation procedures, and the missing data compensation procedures used for the 1999 Survey of Spouses of Active Duty Personnel, Together...

  19. A systematic methodology for design of tailor-made blended products

    DEFF Research Database (Denmark)

    Yunus, Nor Alafiza Binti; Gernaey, Krist; Woodley, John

    2014-01-01

    A systematic methodology for design of tailor-made blended products has been developed. In tailor-made blended products, one identifies the product needs and matches them by blending different chemicals. The systematic methodology has four main tasks. First, the design problem is defined: the pro......, the methodology is highlighted through two case studies involving gasoline blends and lubricant base oils....

  20. Methodology applied in Cuba for siting, designing, and building a radioactive waste repository under safety conditions

    International Nuclear Information System (INIS)

    Orbera, L.; Peralta, J.L.; Franklin, R.; Gil, R.; Chales, G.; Rodriguez, A.

    1993-01-01

    The work presents the methodology used in Cuba for siting, designing, and building a radioactive waste repository safely. This methodology covers both the technical and socio-economic factors, as well as those of design and construction so as to have a safe siting for this kind of repository under Cuba especial condition. Applying this methodology will results in a safe repository

  1. Risk analysis methodology designed for small and medium enterprises

    OpenAIRE

    Ladislav Beránek; Radim Remeš

    2009-01-01

    The aim of this paper is to present risk analysis procedures successfully applied by several Czech small and medium enterprises. The paper presents in detail the individual steps we use in risk analysis of small and medium enterprises in the Czech Republic. Suggested method to risk analysis is based on the modification of the FRAP methodology and the BITS recommendation. Modifications of both methodologies are described in detail. We propose modified risk analysis methodology which is quick a...

  2. Design of a rotary reactor for chemical-looping combustion. Part 1: Fundamentals and design methodology

    KAUST Repository

    Zhao, Zhenlong

    2014-04-01

    Chemical-looping combustion (CLC) is a novel and promising option for several applications including carbon capture (CC), fuel reforming, H 2 generation, etc. Previous studies demonstrated the feasibility of performing CLC in a novel rotary design with micro-channel structures. In the reactor, a solid wheel rotates between the fuel and air streams at the reactor inlet, and depleted air and product streams at exit. The rotary wheel consists of a large number of micro-channels with oxygen carriers (OC) coated on the inner surface of the channel walls. In the CC application, the OC oxidizes the fuel while the channel is in the fuel zone to generate undiluted CO2, and is regenerated while the channel is in the air zone. In this two-part series, the effect of the reactor design parameters is evaluated and its performance with different OCs is compared. In Part 1, the design objectives and criteria are specified and the key parameters controlling the reactor performance are identified. The fundamental effects of the OC characteristics, the design parameters, and the operating conditions are studied. The design procedures are presented on the basis of the relative importance of each parameter, enabling a systematic methodology of selecting the design parameters and the operating conditions with different OCs. Part 2 presents the application of the methodology to the designs with the three commonly used OCs, i.e., nickel, copper, and iron, and compares the simulated performances of the designs. © 2013 Elsevier Ltd. All rights reserved.

  3. Proposal of a methodology for the design of communication strategies.

    Directory of Open Access Journals (Sweden)

    Mislany Hernández Aguiar

    2009-12-01

    Full Text Available In this work the topic of Strategies of Communication is approached from the point of view of Cuban managerial improvement process. The topic deal with two models or paradigms: the transmissive, where the diffusion or transmission of information is conceived versus communication and the persuasive which on the other hand refers to the modification of behaviors, opinions, attitudes and that demands knowledge about the audience. It is clarified that persuasive communication is the theoretical and methodological basis of communication strategies that constitute the set of ways and modes of communication that have the objective to establish an effective communication of ideas, products or services. In this work is mentioned different criteria that exist regarding the elements that should be treated in the strategy of communication and the proposal of steps that according to the author must not be excluded in it, such as: definition of communicative or communication objectives, determination of audiences, definition of communication strategies, design of the action plan, control and feedback.

  4. Performance Driven Design and Design Information Exchange : Establishing a computational design methodology for parametric and performance-driven design of structures via topology optimization for rough structurally informed design models

    NARCIS (Netherlands)

    Mostafavi, S.; Morales Beltran, M.G.; Biloria, N.M.

    2013-01-01

    This paper presents a performance driven computational design methodology through introducing a case on parametric structural design. The paper describes the process of design technology development and frames a design methodology through which engineering, -in this case structural- aspects of

  5. Testing survey methodology to measure patients' experiences and views of the emergency and urgent care system: telephone versus postal survey.

    Science.gov (United States)

    O'Cathain, Alicia; Knowles, Emma; Nicholl, Jon

    2010-06-09

    To address three methodological challenges when attempting to measure patients' experiences and views of a system of inter-related health services rather than a single service: the feasibility of a population survey for identifying system users, the optimal recall period for system use, and the mode of administration which is most feasible and representative in the context of routine measurement of system performance. Postal survey of a random sample of 900 members of the general population and market research telephone survey of quota sample of 1000 members of the general population. Response rates to the postal and market research telephone population surveys were 51% (457 out of 893 receiving the questionnaire) and 9% (1014 out of 11924 contactable telephone numbers) respectively. Both surveys were able to identify users of the system in the previous three months: 22% (99/457) of postal and 15% (151/1000) of telephone survey respondents. For both surveys, recall of event occurrence reduced by a half after four weeks. The telephone survey more accurately estimated use of individual services within the system than the postal survey. Experiences and views of events remained reasonably stable over the three month recall time period for both modes of administration. Even though the response rate was lower, the telephone survey was more representative of the population, was faster and cheaper to undertake, and had fewer missing values. It is possible to identify users of a health care system using a population survey. A recall period of three months can be used to estimate experiences and views but one month is more accurate for estimating use of the system. A quota sample market research telephone survey gives a low response rate yet is more representative and accurate than a postal survey of a random sample of the population.

  6. Multidisciplinary design and optimization (MDO) methodology for the aircraft conceptual design

    Science.gov (United States)

    Iqbal, Liaquat Ullah

    An integrated design and optimization methodology has been developed for the conceptual design of an aircraft. The methodology brings higher fidelity Computer Aided Design, Engineering and Manufacturing (CAD, CAE and CAM) Tools such as CATIA, FLUENT, ANSYS and SURFCAM into the conceptual design by utilizing Excel as the integrator and controller. The approach is demonstrated to integrate with many of the existing low to medium fidelity codes such as the aerodynamic panel code called CMARC and sizing and constraint analysis codes, thus providing the multi-fidelity capabilities to the aircraft designer. The higher fidelity design information from the CAD and CAE tools for the geometry, aerodynamics, structural and environmental performance is provided for the application of the structured design methods such as the Quality Function Deployment (QFD) and the Pugh's Method. The higher fidelity tools bring the quantitative aspects of a design such as precise measurements of weight, volume, surface areas, center of gravity (CG) location, lift over drag ratio, and structural weight, as well as the qualitative aspects such as external geometry definition, internal layout, and coloring scheme early in the design process. The performance and safety risks involved with the new technologies can be reduced by modeling and assessing their impact more accurately on the performance of the aircraft. The methodology also enables the design and evaluation of the novel concepts such as the blended (BWB) and the hybrid wing body (HWB) concepts. Higher fidelity computational fluid dynamics (CFD) and finite element analysis (FEA) allow verification of the claims for the performance gains in aerodynamics and ascertain risks of structural failure due to different pressure distribution in the fuselage as compared with the tube and wing design. The higher fidelity aerodynamics and structural models can lead to better cost estimates that help reduce the financial risks as well. This helps in

  7. A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process

    DEFF Research Database (Denmark)

    Alvarado-Morales, Merlin; Abd.Hamid, Mohd-Kamaruddin; Sin, Gürkan

    2010-01-01

    In this work, a framework for the simultaneous solution of design and control problems is presented. Within this framework, two methodologies are presented, the integrated process design and controller design (IPDC) methodology and the process-group contribution (PGC) methodology. The concepts...... of attainable region (AR), driving force (DF), process-group (PG) and reverse simulation are used within these methodologies. The IPDC methodology is used to find the optimal design-control strategy of a process by locating the maximum point in the AR and DF diagrams for reactor and separator, respectively....... The PGC methodology is used to generate more efficient separation designs in terms of energy consumption by targeting the separation task at the largest DF. Both methodologies are highlighted through the application of two case studies, a bioethanol production process and a succinic acid production...

  8. Arab Teens Lifestyle Study (ATLS: objectives, design, methodology and implications

    Directory of Open Access Journals (Sweden)

    Musaiger AO; ATLS Research Group

    2011-12-01

    Full Text Available Hazzaa M Al-Hazzaa1,2, Abdulrahman O Musaiger3, ATLS Research Group1Exercise Physiology Laboratory, Department of Physical Education and Movement Sciences, College of Education, King Saud University, 2Scientific Board, Obesity Research Chair, King Saud University, Riyadh, Saudi Arabia; 3Arab Center for Nutrition, Manama, Bahrain, and Nutrition and Health Studies Unit, Deanship of Scientific Research, University of Bahrain, BahrainBackground: There is a lack of comparable data on physical activity, sedentary behavior, and dietary habits among Arab adolescents, which limits our understanding and interpretation of the relationship between obesity and lifestyle parameters. Therefore, we initiated the Arab Teens Lifestyle Study (ATLS. The ATLS is a multicenter collaborative project for assessing lifestyle habits of Arab adolescents. The objectives of the ATLS project were to investigate the prevalence rates for overweight and obesity, physical activity, sedentary activity and dietary habits among Arab adolescents, and to examine the interrelationships between these lifestyle variables. This paper reports on the objectives, design, methodology, and implications of the ATLS.Design/Methods: The ATLS is a school-based cross-sectional study involving 9182 randomly selected secondary-school students (14–19 years from major Arab cities, using a multistage stratified sampling technique. The participating Arab cities included Riyadh, Jeddah, and Al-Khobar (Saudi Arabia, Bahrain, Dubai (United Arab Emirates, Kuwait, Amman (Jordan, Mosel (Iraq, Muscat (Oman, Tunisia (Tunisia and Kenitra (Morocco. Measured variables included anthropometric measurements, physical activity, sedentary behavior, sleep duration, and dietary habits.Discussion: The ATLS project will provide a unique opportunity to collect and analyze important lifestyle information from Arab adolescents using standardized procedures. This is the first time a collaborative Arab project will

  9. Development of risk-based decision methodology for facility design.

    Science.gov (United States)

    2014-06-01

    This report develops a methodology for CDOT to use in the risk analysis of various types of facilities and provides : illustrative examples for the use of the proposed framework. An overview of the current practices and applications to : illustrate t...

  10. Design for Restoration: beyond the survey

    Directory of Open Access Journals (Sweden)

    Giovanni Carbonara

    2015-01-01

    Full Text Available  This new issue, that we can define special, marks an important change for DISEGNARECON (its transfer from the University of Bologna to the University of L’Aquila facing the topic of the Design for the Restoration in a way that is special too. Treated in fact - beside the outgoing editor in chief, Roberto Mingucci - by Mario Centofanti, who now assumes the responsibility for the magazine, and Giovanni Carbonara, which is definitely authoritative reference in the field. Sharing a strong interest for communicating the Restoration Project, they intended to indicate the substantial union of methods and objectives between the disciplines of architectural survey and of restoration, which makes the meaning of an aggregation now also institutionally formalized and particularly significant for the project on the existing architecture. 

  11. IoT-Based Information System for Healthcare Application: Design Methodology Approach

    Directory of Open Access Journals (Sweden)

    Damian Dziak

    2017-06-01

    Full Text Available Over the last few decades, life expectancy has increased significantly. However, elderly people who live on their own often need assistance due to mobility difficulties, symptoms of dementia or other health problems. In such cases, an autonomous supporting system may be helpful. This paper proposes the Internet of Things (IoT-based information system for indoor and outdoor use. Since the conducted survey of related works indicated a lack of methodological approaches to the design process, therefore a Design Methodology (DM, which approaches the design target from the perspective of the stakeholders, contracting authorities and potential users, is introduced. The implemented solution applies the three-axial accelerometer and magnetometer, Pedestrian Dead Reckoning (PDR, thresholding and the decision trees algorithm. Such an architecture enables the localization of a monitored person within four room-zones with accuracy; furthermore, it identifies falls and the activities of lying, standing, sitting and walking. Based on the identified activities, the system classifies current activities as normal, suspicious or dangerous, which is used to notify the healthcare staff about possible problems. The real-life scenarios validated the high robustness of the proposed solution. Moreover, the test results satisfied both stakeholders and future users and ensured further cooperation with the project.

  12. Progressive design methodology for complex engineering systems based on multiobjective genetic algorithms and linguistic decision making

    NARCIS (Netherlands)

    Kumar, P.; Bauer, P.

    2008-01-01

    This work focuses on a design methodology that aids in design and development of complex engineering systems. This design methodology consists of simulation, optimization and decision making. Within this work a framework is presented in which modelling, multi-objective optimization and multi

  13. Computer Aided Methodology for Simultaneous Synthesis, Design & Analysis of Chemical Products-Processes

    DEFF Research Database (Denmark)

    d'Anterroches, Loïc; Gani, Rafiqul

    2006-01-01

    A new combined methodology for computer aided molecular design and process flowsheet design is presented. The methodology is based on the group contribution approach for prediction of molecular properties and design of molecules. Using the same principles, process groups have been developed toget...

  14. On-chip high-voltage generator design design methodology for charge pumps

    CERN Document Server

    Tanzawa, Toru

    2016-01-01

    This book provides various design techniques for switched-capacitor on-chip high-voltage generators, including charge pump circuits, regulators, level shifters, references, and oscillators.  Readers will see these techniques applied to system design in order to address the challenge of how the on-chip high-voltage generator is designed for Flash memories, LCD drivers, and other semiconductor devices to optimize the entire circuit area and power efficiency with a low voltage supply, while minimizing the cost.  This new edition includes a variety of useful updates, including coverage of power efficiency and comprehensive optimization methodologies for DC-DC voltage multipliers, modeling of extremely low voltage Dickson charge pumps, and modeling and optimum design of AC-DC switched-capacitor multipliers for energy harvesting and power transfer for RFID.

  15. Using a statewide survey methodology to prioritize pediatric cardiology core content.

    Science.gov (United States)

    Neal, Ashley E; Lehto, Elizabeth; Miller, Karen Hughes; Ziegler, Craig; Davis, Erin

    2018-01-01

    Although pediatrician-reported relevance of Canadian cardiology-specific objectives has been studied, similar data are not available for the 2016 American Board of Pediatrics (ABP) cardiology-specific objectives. This study asked Kentucky trainees, pediatricians, and pediatric cardiologists to identify "most important" content within these objectives. This cross-sectional study used an original, online survey instrument based on the 2016 ABP cardiology-specific objectives. We collected quantitative data (numerical indications of importance) and qualitative data (open-ended replies regarding missing content and difficulty in teaching and learning). Respondents indicated the top two choices of most important items within eight content areas. Descriptive statistics (frequencies and percentages) and chi-square analysis were calculated. Content within categories was organized using naturally occurring "clusters" and "gaps" in scores. Common themes among open-ended qualitative responses were identified using Pandit's version of Glaser and Strauss Grounded theory (constant comparison). Of the 136 respondents, 23 (17%) were residents, 15 (11%) fellows, 85 (62%) pediatricians, and 13 (10%) pediatric cardiologists. Of attendings, 80% reported faculty/gratis faculty status. Naturally occurring clusters in respondent-designated importance resulted in ≤3 "most selected" objectives per content area. Objectives in "most selected" content pertained to initial diagnosis (recognition of abnormality/disease) (n = 16), possible emergent/urgent intervention required (n = 14), building a differential (n = 8), and planning a workup (n = 4). Conversely, themes for "least selected" content included comanagement with subspecialist (n = 15), knowledge useful in patient-family communication (n = 9), knowledge that can be referenced (as needed) (n = 7), and longitudinal/follow-up concerns (n = 5). This study demonstrated the utility of an online survey

  16. Southeast Region Headboat Survey-PPS Survey Design Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset is a record of trips selected during pilot procedures for the PPS design project designed to track the port agents ability to follow the PPS design and...

  17. Siting Study Framework and Survey Methodology for Marine and Hydrokinetic Energy Project in Offshore Southeast Florida

    Energy Technology Data Exchange (ETDEWEB)

    Vinick, Charles; Riccobono, Antonino, MS; Messing, Charles G., Ph.D.; Walker, Brian K., Ph.D.; Reed, John K., Ph.D.

    2012-02-28

    Dehlsen Associates, LLC was awarded a grant by the United States Department of Energy (DOE) Golden Field Office for a project titled 'Siting Study Framework and Survey Methodology for Marine and Hydrokinetic Energy Project in Offshore Southeast Florida,' corresponding to DOE Grant Award Number DE-EE0002655 resulting from DOE funding Opportunity Announcement Number DE-FOA-0000069 for Topic Area 2, and it is referred to herein as 'the project.' The purpose of the project was to enhance the certainty of the survey requirements and regulatory review processes for the purpose of reducing the time, efforts, and costs associated with initial siting efforts of marine and hydrokinetic energy conversion facilities that may be proposed in the Atlantic Ocean offshore Southeast Florida. To secure early input from agencies, protocols were developed for collecting baseline geophysical information and benthic habitat data that can be used by project developers and regulators to make decisions early in the process of determining project location (i.e., the siting process) that avoid or minimize adverse impacts to sensitive marine benthic habitat. It is presumed that such an approach will help facilitate the licensing process for hydrokinetic and other ocean renewable energy projects within the study area and will assist in clarifying the baseline environmental data requirements described in the U.S. Department of the Interior Bureau of Ocean Energy Management, Regulation and Enforcement (formerly Minerals Management Service) final regulations on offshore renewable energy (30 Code of Federal Regulations 285, published April 29, 2009). Because projects generally seek to avoid or minimize impacts to sensitive marine habitats, it was not the intent of this project to investigate areas that did not appear suitable for the siting of ocean renewable energy projects. Rather, a two-tiered approach was designed with the first step consisting of gaining overall insight

  18. A performance-oriented power transformer design methodology using multi-objective evolutionary optimization.

    Science.gov (United States)

    Adly, Amr A; Abd-El-Hafiz, Salwa K

    2015-05-01

    Transformers are regarded as crucial components in power systems. Due to market globalization, power transformer manufacturers are facing an increasingly competitive environment that mandates the adoption of design strategies yielding better performance at lower costs. In this paper, a power transformer design methodology using multi-objective evolutionary optimization is proposed. Using this methodology, which is tailored to be target performance design-oriented, quick rough estimation of transformer design specifics may be inferred. Testing of the suggested approach revealed significant qualitative and quantitative match with measured design and performance values. Details of the proposed methodology as well as sample design results are reported in the paper.

  19. A performance-oriented power transformer design methodology using multi-objective evolutionary optimization

    Directory of Open Access Journals (Sweden)

    Amr A. Adly

    2015-05-01

    Full Text Available Transformers are regarded as crucial components in power systems. Due to market globalization, power transformer manufacturers are facing an increasingly competitive environment that mandates the adoption of design strategies yielding better performance at lower costs. In this paper, a power transformer design methodology using multi-objective evolutionary optimization is proposed. Using this methodology, which is tailored to be target performance design-oriented, quick rough estimation of transformer design specifics may be inferred. Testing of the suggested approach revealed significant qualitative and quantitative match with measured design and performance values. Details of the proposed methodology as well as sample design results are reported in the paper.

  20. A performance-oriented power transformer design methodology using multi-objective evolutionary optimization

    Science.gov (United States)

    Adly, Amr A.; Abd-El-Hafiz, Salwa K.

    2014-01-01

    Transformers are regarded as crucial components in power systems. Due to market globalization, power transformer manufacturers are facing an increasingly competitive environment that mandates the adoption of design strategies yielding better performance at lower costs. In this paper, a power transformer design methodology using multi-objective evolutionary optimization is proposed. Using this methodology, which is tailored to be target performance design-oriented, quick rough estimation of transformer design specifics may be inferred. Testing of the suggested approach revealed significant qualitative and quantitative match with measured design and performance values. Details of the proposed methodology as well as sample design results are reported in the paper. PMID:26257939

  1. The effect of bridge deck design methodology on crack control.

    Science.gov (United States)

    2010-01-30

    At present, the Idaho Transportation Department (ITD) Bridge Design Manual allows engineers to use the AASHTO empirical method to : design concrete bridge decks. However, the ITD Bridge Section would like to compare their design practices to those em...

  2. Designing web surveys for the multi-device internet

    NARCIS (Netherlands)

    de Bruijne, M.A.

    2015-01-01

    The rise of the mobile internet has rapidly changed the landscape for fielding web surveys. The devices that respondents use to take a web survey vary greatly in size and user interface. This diversity in the interaction between survey and respondent makes it challenging to design a web survey for

  3. Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle System

    DEFF Research Database (Denmark)

    Abd.Hamid, Mohd-Kamaruddin; Sin, Gürkan; Gani, Rafiqul

    2010-01-01

    This paper presents the integrated process design and controller design (IPDC) for a reactor-separator-recycle (RSR) system and evaluates a decomposition methodology to solve the IPDC problem. Accordingly, the IPDC problem is solved by decomposing it into four hierarchical stages: (i) pre-analysis......, (ii) design analysis, (iii) controller design analysis, and (iv) final selection and verification. The methodology makes use of thermodynamic-process insights and the reverse design approach to arrive at the final process-controller design decisions. The developed methodology is illustrated through...... the design of a RSR system involving consecutive reactions, A B -> C and shown to provide effective solutions that satisfy design, control and cost criteria. The advantage of the proposed methodology is that it is systematic, makes use of thermodynamic-process knowledge and provides valuable insights...

  4. An aspect-oriented methodology for designing secure applications

    NARCIS (Netherlands)

    Georg, Geri; Ray, Indrakshi; Anastasakis, Kyriakos; Bordbar, Behzad; Toahchoodee, Manachai; Houmb, S.H.

    We propose a methodology, based on aspect-oriented modeling (AOM), for incorporating security mechanisms in an application. The functionality of the application is described using the primary model and the attacks are specified using aspects. The attack aspect is composed with the primary model to

  5. Modeling the Cloud: Methodology for Cloud Computing Strategy and Design

    Science.gov (United States)

    2011-05-17

    roadmap” 4. Leverage an enterprise architecture methodology, such as TOGAF and/or DODAF, to build integrated artifacts 5. Extend the business and...the Patriot Act. - 41 - Transition Planning - 42 - Transition Planning: Leveraging TOGAF Phases E, F, G &H: • Opportunities and Solutions

  6. A system-of-systems modeling methodology for strategic general aviation design decision-making

    Science.gov (United States)

    Won, Henry Thome

    General aviation has long been studied as a means of providing an on-demand "personal air vehicle" that bypasses the traffic at major commercial hubs. This thesis continues this research through development of a system of systems modeling methodology applicable to the selection of synergistic product concepts, market segments, and business models. From the perspective of the conceptual design engineer, the design and selection of future general aviation aircraft is complicated by the definition of constraints and requirements, and the tradeoffs among performance and cost aspects. Qualitative problem definition methods have been utilized, although their accuracy in determining specific requirement and metric values is uncertain. In industry, customers are surveyed, and business plans are created through a lengthy, iterative process. In recent years, techniques have developed for predicting the characteristics of US travel demand based on travel mode attributes, such as door-to-door time and ticket price. As of yet, these models treat the contributing systems---aircraft manufacturers and service providers---as independently variable assumptions. In this research, a methodology is developed which seeks to build a strategic design decision making environment through the construction of a system of systems model. The demonstrated implementation brings together models of the aircraft and manufacturer, the service provider, and most importantly the travel demand. Thus represented is the behavior of the consumers and the reactive behavior of the suppliers---the manufacturers and transportation service providers---in a common modeling framework. The results indicate an ability to guide the design process---specifically the selection of design requirements---through the optimization of "capability" metrics. Additionally, results indicate the ability to find synergetic solutions, that is solutions in which two systems might collaborate to achieve a better result than acting

  7. [Customer satisfaction in home care: methodological issues based on a survey carried out in Lazio].

    Science.gov (United States)

    Pasquarella, A; Marceca, M; Casagrande, S; Gentile, D; Zeppilli, D; Buonaiuto, N; Cozzolino, M; Guasticchi, G

    2007-01-01

    Home care customer satisfaction has been, until now, rarely evaluated. After illustrating the main italian regional surveys on this issue, the article presents a customer satisfaction survey carried out in the district of Civitavecchia (Local Health Unit 'Rome F'), Lazio, regarding 30 home care beneficiaries. Methodological aspects emerging from the survey are basically focused on: advantages and disadvantages of quantitative and qualitative approaches (possibly associated each other); main criteria of eligibility of people selected for interviewing, both patients or caregivers; conditions that maximize answers reliability, including training on interviewers. Authors highlight opportunity of using such kind of survey, integrated with other different tools, into a systemic vision, for promoting management changes coming from suggested problems, aimed at total quality management.

  8. Parents’ motives for home education: The influence of methodological design and social context

    Directory of Open Access Journals (Sweden)

    Thomas SPIEGLER

    2010-10-01

    Full Text Available Parents’ motives for home education are one of the most researched topics within home education research. The focus of this article is on the question of the degree to which the results regarding these motives are influenced and shaped by the applied methods and thesocial context. The empirical basis is a meta-analysis of twelve research examples from the last two decades. It is concluded that the diversity within the results can partly be traced back to fundamental differences in the methodological design, to the absence of detailed theoretical modelling and remarkable differences of the survey instruments and that the role of the social environment and the process of the construction of motives in a certain socialcontext deserve more attention.

  9. Parents’ motives for home education: The influence of methodological design and social context

    Directory of Open Access Journals (Sweden)

    Thomas Spiegler

    2010-10-01

    Full Text Available Parents’ motives for home education are one of the most researched topics within home education research. The focus of this article is on the question of the degree to which the results regarding these motives are influenced and shaped by the applied methods and the social context. The empirical basis is a meta-analysis of twelve research examples from the last two decades. It is concluded that the diversity within the results can partly be traced back to fundamental differences in the methodological design, to the absence of detailed theoretical modelling and remarkable differences of the survey instruments and that the role of the social environment and the process of the construction of motives in a certain social context deserve more attention.

  10. Shape and Topology Optimization Methodologies Used in Architectural Design

    DEFF Research Database (Denmark)

    Frier, Christian; Kirkegaard, Poul Henning; Christiansen, Karl

    2004-01-01

    the conceptual design for a structural engineer tends to be more concrete in nature, i.e. the choice between an arch and a suspension structure, between concrete and steel. Still, these differences tend to vanish in some of the most successful examples of integrated architectural and engineering design.......Architects and engineers both employ iterative multi-stage design procedures, starting with initial conceptual design and progressing to more detailed final design. The conceptual design for an architect can be very abstract, with content that might be more poetic than geometric. On the other hand...

  11. Review of updated design of SPWR with PSA methodology

    International Nuclear Information System (INIS)

    Oikawa, Tetsukuni; Muramatsu, Ken

    1995-01-01

    This paper presents the procedures and results of a PSA (Probabilistic Safety Assessment) of the SPWR (System-Integrated PWR), which is being developed at the Japan Atomic Energy Research Institute (JAERI) as a medium sized innovative passive safe reactor, to assist in the design improvement of the SPWR at the basic or conceptual design phase by reviewing the design and identifying the design vulnerability. The first phase PSA, which was carried out in 1991, was a scoping analysis in order to understand overall plant characteristics and to search for general design weakness. After discussing the results of the first phase PSA, the SPWR designer group changed some designs of the SPWR. The second phase PSA of the SPWR was performed for the modified design in order to identify the design vulnerability as well as to grasp its overall safety level. Special items of these PSAs are as follows: (1) systematic identification of initiating events related to newly designed systems by the failure mode effect analysis (FMEA), (2) delineation of accident sequences for the internal initiating events using accident progression flow charts which is cost effective for conceptual design phase, (3) quantification of event trees based on many engineering judgement, and (4) lots of sensitivity analyses to examine applicability of data assignment. Qualitative and quantitative results of PSA provided very useful information for decision makings of design improvement and recommendations for further consideration in the process of detailed design. (author)

  12. PWR control system design using advanced linear and non-linear methodologies

    International Nuclear Information System (INIS)

    Rabindran, N.; Whitmarsh-Everiss, M.J.

    2004-01-01

    Consideration is here given to the methodology deployed for non-linear heuristic analysis in the time domain supported by multi-variable linear control system design methods for the purposes of operational dynamics and control system analysis. This methodology is illustrated by the application of structural singular value μ analysis to Pressurised Water Reactor control system design. (author)

  13. Methodology of Computer-Aided Design of Variable Guide Vanes of Aircraft Engines

    Science.gov (United States)

    Falaleev, Sergei V.; Melentjev, Vladimir S.; Gvozdev, Alexander S.

    2016-01-01

    The paper presents a methodology which helps to avoid a great amount of costly experimental research. This methodology includes thermo-gas dynamic design of an engine and its mounts, the profiling of compressor flow path and cascade design of guide vanes. Employing a method elaborated by Howell, we provide a theoretical solution to the task of…

  14. A framework for using simulation methodology in ergonomics interventions in design projects

    DEFF Research Database (Denmark)

    Broberg, Ole; Duarte, Francisco; Andersen, Simone Nyholm

    2014-01-01

    The aim of this paper is to outline a framework of simulation methodology in design processes from an ergonomics perspective......The aim of this paper is to outline a framework of simulation methodology in design processes from an ergonomics perspective...

  15. Methodology of Young Minds Matter: The second Australian Child and Adolescent Survey of Mental Health and Wellbeing.

    Science.gov (United States)

    Hafekost, Jennifer; Lawrence, David; Boterhoven de Haan, Katrina; Johnson, Sarah E; Saw, Suzy; Buckingham, William J; Sawyer, Michael G; Ainley, John; Zubrick, Stephen R

    2016-09-01

    To describe the study design of Young Minds Matter: The second Australian Child and Adolescent Survey of Mental Health and Wellbeing. The aims of the study, sample design, development of survey content, field procedures and final questionnaires are detailed. During 2013-2014, a national household survey of the mental health and wellbeing of young people was conducted involving a sample of 6310 families selected at random from across Australia. The survey included a face-to-face diagnostic interview with parents/carers of 4- to 17-year-olds and a self-report questionnaire completed by young people aged 11-17 years. The overall response rate to the survey was 55% with 6310 parents/carers of eligible households participating in the survey. In addition, 2967 or 89% of young people aged 11-17 years in these participating households completed a questionnaire. The survey sample was found to be broadly representative of the Australian population on major demographic characteristics when compared with data from the Census of Population and Housing. However, adjustments were made for an over-representation of younger children aged 4 to 7 years and also families with more than one eligible child in the household. Young Minds Matter provides updated national prevalence estimates of common child and adolescent mental disorders, describes patterns of service use and will help to guide future decisions in the development of policy and provision of mental health services for children and adolescents. Advancements in interviewing methodology, addition of a data linkage component and informed content development contributed to improved breadth and quality of the data collected. © The Royal Australian and New Zealand College of Psychiatrists 2015.

  16. Ensuring VGI Credibility in Urban-Community Data Generation: A Methodological Research Design

    Directory of Open Access Journals (Sweden)

    Jamie O'Brien

    2016-06-01

    Full Text Available In this paper we outline the methodological development of current research into urban community formations based on combinations of qualitative (volunteered and quantitative (spatial analytical and geo-statistical data. We outline a research design that addresses problems of data quality relating to credibility in volunteered geographic information (VGI intended for Web-enabled participatory planning. Here we have drawn on a dual notion of credibility in VGI data, and propose a methodological workflow to address its criteria. We propose a ‘super-positional’ model of urban community formations, and report on the combination of quantitative and participatory methods employed to underpin its integration. The objective of this methodological phase of study is to enhance confidence in the quality of data for Web-enabled participatory planning. Our participatory method has been supported by rigorous quantification of area characteristics, including participant communities’ demographic and socio-economic contexts. This participatory method provided participants with a ready and accessible format for observing and mark-making, which allowed the investigators to iterate rapidly a system design based on participants’ responses to the workshop tasks. Participatory workshops have involved secondary school-age children in socio-economically contrasting areas of Liverpool (Merseyside, UK, which offers a test-bed for comparing communities’ formations in comparative contexts, while bringing an under-represented section of the population into a planning domain, whose experience may stem from public and non-motorised transport modalities. Data has been gathered through one-day participatory workshops, featuring questionnaire surveys, local site analysis, perception mapping and brief, textual descriptions. This innovative approach will support Web-based participation among stakeholding planners, who may benefit from well-structured, community

  17. SOIL SURVEY AND MAPPING USING QGIS IN THE SPECIFIC METHODOLOGICAL CONTEXT OF ROMANIA

    Directory of Open Access Journals (Sweden)

    Bogdan Rosca

    2013-07-01

    Full Text Available The purpose of this paper is to describe the use of QGIS as tool for soil survey and mapping in Romanian methodological context and to analyze the efficiency of Open Source tools in this matter. Beginning with integrating data from various sources (GPS points, analog and digital maps, analytical soil data, etc, continuing with editing and spatial analysis and finishing with map production, we have used QGIS and it's add-ons in every stage of the soil survey and mapping process following, as much as possible, standard procedures specified by methodology. Also we have searched for optimal solution in order to solve specific problems that may occur such as the type of topology for digitization (when the surveyor need to create data from scratch, how to integrate various databases, specific queries, etc. In conclusion QGIS, with his vast array of tools, can successfully be used in soil survey and for map production according to standards required by Romanian methodology. It can be implemented also very easily with minimum effort both technical and financial.

  18. User-inspired design methodology using Affordance Structure Matrix (ASM for construction projects

    Directory of Open Access Journals (Sweden)

    Maheswari J. Uma

    2017-01-01

    Full Text Available Traditionally, design phase of construction projects is often performed with incomplete and inaccurate user preferences. This is due to inefficiencies in the methodologies used for capturing the user requirements that can subsequently lead to inconsistencies and result in non-optimised end-result. Iterations and subsequent reworks due to such design inefficiencies is one of the major reasons for unsuccessful project delivery as they impact project performance measures such as time and cost among others. The existing design theories and practice are primarily based on functional requirements. Function-based design deals with design of artifact alone, which may yield favourable or unfavourable consequences with the design artifact. However, incorporating other interactions such as interactions between user & designer is necessary for optimised end-result. Hence, the objective of this research work is to devise a systematic design methodology considering all the three interactions among users, designers and artefacts for improved design efficiency. In this study, it has been attempted to apply the theory of affordances in a case project that involves the design of an offshore facility. A step-by-step methodology for developing Affordance Structure Matrix (ASM, which integrates House of Quality (HOQ and Design Structure Matrix (DSM, is proposed that can effectively capture the user requirements. HOQ is a popular quality management tool for capturing client requirements and DSM is a matrix-based tool that can capture the interdependency among the design entities. The proposed methodology utilises the strengths of both the tools, as DSM compliments HOQ in the process. In this methodology, different affordances such as AUA (Artifact-User-Affordance, AAA (Artifact-Artifact-Affordance and DDA (Designer-Designer-Affordance are captured systematically. Affordance is considered to be user-driven in this context that is in contrast to prevailing design

  19. A Formal, Hierarchical Design and Validation Methodology for VLSI

    OpenAIRE

    Davie, Bruce S.

    1988-01-01

    The high cost of fabricating VLSI circuits requires that they be validated, that is, shown to function correctly, before manufacture. The cost of design errors can be kept to a minimum if such validation occurs as early as possible; this is achieved by integrating validation into a hierarchical design procedure. In this thesis, a hierarchical approach to design, in which validation is performed between each pair of adjacent levels in the hierarchy, is developed. In order to ...

  20. Methodologies for Root Locus and Loop Shaping Control Design with Comparisons

    Science.gov (United States)

    Kopasakis, George

    2017-01-01

    This paper describes some basics for the root locus controls design method as well as for loop shaping, and establishes approaches to expedite the application of these two design methodologies to easily obtain control designs that meet requirements with superior performance. The two design approaches are compared for their ability to meet control design specifications and for ease of application using control design examples. These approaches are also compared with traditional Proportional Integral Derivative (PID) control in order to demonstrate the limitations of PID control. Robustness of these designs is covered as it pertains to these control methodologies and for the example problems.

  1. Applying axiomatic design methodology in developing modified libertation products

    Directory of Open Access Journals (Sweden)

    Bibiana Margarita Vallejo Díaz

    2004-09-01

    Full Text Available Some conceptual elements regarding the axiomatic design method were applied to a specific case-study regarding developing modified liberation compressed product (CLM-UN, for use in the agricultural sector as pH regulating agent in solil. The study was orientated towards defining functional requeriments, design parameters and process variables for manufacturing the product. Independence and information were evaluated, supporting axiomatic design as an alternative for integral product and process design (as a rational and systemic exercise, facilitating producing products having the quality which future users expect from them.

  2. Disordered Gambling Prevalence: Methodological Innovations in a General Danish Population Survey.

    Science.gov (United States)

    Harrison, Glenn W; Jessen, Lasse J; Lau, Morten I; Ross, Don

    2018-03-01

    We study Danish adult gambling behavior with an emphasis on discovering patterns relevant to public health forecasting and economic welfare assessment of policy. Methodological innovations include measurement of formative in addition to reflective constructs, estimation of prospective risk for developing gambling disorder rather than risk of being falsely negatively diagnosed, analysis with attention to sample weights and correction for sample selection bias, estimation of the impact of trigger questions on prevalence estimates and sample characteristics, and distinguishing between total and marginal effects of risk-indicating factors. The most significant novelty in our design is that nobody was excluded on the basis of their response to a 'trigger' or 'gateway' question about previous gambling history. Our sample consists of 8405 adult Danes. We administered the Focal Adult Gambling Screen to all subjects and estimate prospective risk for disordered gambling. We find that 87.6% of the population is indicated for no detectable risk, 5.4% is indicated for early risk, 1.7% is indicated for intermediate risk, 2.6% is indicated for advanced risk, and 2.6% is indicated for disordered gambling. Correcting for sample weights and controlling for sample selection has a significant effect on prevalence rates. Although these estimates of the 'at risk' fraction of the population are significantly higher than conventionally reported, we infer a significant decrease in overall prevalence rates of detectable risk with these corrections, since gambling behavior is positively correlated with the decision to participate in gambling surveys. We also find that imposing a threshold gambling history leads to underestimation of the prevalence of gambling problems.

  3. Binational Arsenic Exposure Survey: Methodology and Estimated Arsenic Intake from Drinking Water and Urinary Arsenic Concentrations

    Directory of Open Access Journals (Sweden)

    Robin B. Harris

    2012-03-01

    Full Text Available The Binational Arsenic Exposure Survey (BAsES was designed to evaluate probable arsenic exposures in selected areas of southern Arizona and northern Mexico, two regions with known elevated levels of arsenic in groundwater reserves. This paper describes the methodology of BAsES and the relationship between estimated arsenic intake from beverages and arsenic output in urine. Households from eight communities were selected for their varying groundwater arsenic concentrations in Arizona, USA and Sonora, Mexico. Adults responded to questionnaires and provided dietary information. A first morning urine void and water from all household drinking sources were collected. Associations between urinary arsenic concentration (total, organic, inorganic and estimated level of arsenic consumed from water and other beverages were evaluated through crude associations and by random effects models. Median estimated total arsenic intake from beverages among participants from Arizona communities ranged from 1.7 to 14.1 µg/day compared to 0.6 to 3.4 µg/day among those from Mexico communities. In contrast, median urinary inorganic arsenic concentrations were greatest among participants from Hermosillo, Mexico (6.2 µg/L whereas a high of 2.0 µg/L was found among participants from Ajo, Arizona. Estimated arsenic intake from drinking water was associated with urinary total arsenic concentration (p < 0.001, urinary inorganic arsenic concentration (p < 0.001, and urinary sum of species (p < 0.001. Urinary arsenic concentrations increased between 7% and 12% for each one percent increase in arsenic consumed from drinking water. Variability in arsenic intake from beverages and urinary arsenic output yielded counter intuitive results. Estimated intake of arsenic from all beverages was greatest among Arizonans yet participants in Mexico had higher urinary total and inorganic arsenic concentrations. Other contributors to urinary arsenic concentrations should be evaluated.

  4. Biomimetics as a design methodology – possibilities and challenges

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2009-01-01

    the possibilities and challenges. Biomimetics for engineering design is explored through an experiment involving 12 design engineering students. For 7 selected problem areas they searched biology literature available at a university library and identified a number of biological solutions. Central solution...

  5. Software Designing Methodology for ICT4D Domain

    DEFF Research Database (Denmark)

    Zewge, Amanuel; Dittrich, Yvonne; Bekele, Rahel

    2014-01-01

    ICT Interventions at agriculture information service provide rural farmer with the knowledge to improve their wellbeing. There are various technological and operational components that go into design of a software system particularly in ICT for development initiatives. We aimed to design method t...

  6. Participant observation, anthropology methodology and design anthropology research inquiry

    DEFF Research Database (Denmark)

    Gunn, Wendy; Buch Løgstrup, Louise

    2014-01-01

    Within the design studio, and across multiple field sites, the authors compare involvement of research tools and materials during collaborative processes of designing. Their aim is to trace temporal dimensions (shifts/ movements) of where and when learning takes place along different sites of pra...

  7. Participant Observation, Anthropology Methodology and Design Anthropology Research Inquiry

    Science.gov (United States)

    Gunn, Wendy; Løgstrup, Louise B.

    2014-01-01

    Within the design studio, and across multiple field sites, the authors compare involvement of research tools and materials during collaborative processes of designing. Their aim is to trace temporal dimensions (shifts/ movements) of where and when learning takes place along different sites of practice. They do so by combining participant…

  8. Design of an Emulsion-based Personal Detergent through a Model-based Chemical Product Design Methodology

    DEFF Research Database (Denmark)

    Mattei, Michele; Hill, Michael; Kontogeorgis, Georgios

    2013-01-01

    An extended systematic methodology for the design of emulsion-based Chemical products is presented. The methodology consists of a model-based framework involving seven sequential hierarchical steps: starting with the identification of the needs to be satisfied by the product and then adding one-b...... to obtain one or more candidate formulations. A conceptual casestudy representing a personal detergent is presented to highlight the methodology....

  9. A Study to Examine Differences Between In Person and Online Survey Data Collection Methodologies.

    Directory of Open Access Journals (Sweden)

    ROBERT CASE,

    2009-01-01

    Full Text Available The purpose of this study was to examine differences between the results of an in person or face-to-face direct spending survey and a post-event online direct spending survey. Participants in a large annual marathon held in the Mid-Atlantic Region of the United States were used as subjects for the study. The research methodology selected for this study included an in person survey instrument administered to out-of-town marathon participants prior to the start of the event during the race number and race timing chip pick-up period. The same survey instrument was administered online four days after the conclusion of the marathon to the same group of out-of-town marathon participants who did not previously respond to the in person survey. Analysis of data and results revealed that average direct spending for the online respondents was consistently and significantly higher than spending for the in person respondents on direct spending questions. Spending on lodging for both groups showed no significant differences. It was recommended that the use of online survey methods be considered when conducting direct spending studies for participant oriented sporting events when adequate e-mail addresses are available and the potential respondents have a certain level of computer literacy.

  10. UAV-Borne photogrammetry: a low cost 3D surveying methodology for cartographic update

    Directory of Open Access Journals (Sweden)

    Caroti Gabriella

    2017-01-01

    Full Text Available Territorial management requires the most possible up-to-date mapping support of the status quo. Regional scale cartography update cycle is in the medium term (10 to 15 years: therefore, in the intervening time between updates relevant Authorities must provide timely updates for new works or territorial changes. Required surveys can exploit several technologies: ground-based GPS, Terrestrial Laser Scanning (TLS, traditional topography, or, in the case of wider areas, airborne photogrammetry or laser scanning. In recent years UAV-based photogrammetry is becoming increasingly widespread as a versatile, low-cost surveying system for small to medium areas. This surveying methodology was used to generate, in order, a dense point cloud, a high resolution Digital Surface Model (DSM and an orthophotograph of a newly built marina by the mouth of the Arno river in Pisa, Italy, which is not yet included in cartography. Surveying activities took place while the construction site was in operation. Case study issues surfaced in the course of the survey are presented and discussed, suggesting ‘good practice’ rules which, if followed in the survey planning step, can lessen unwanted effects due to criticalities. Besides, results of quality analysis of orthophotographs generated by UAV-borne images are also presented. Such results are discussed in view of a possible use of orthophotographs in updating medium- to large-scale cartography and checked against existing blueprints.

  11. RF power harvesting: a review on designing methodologies and applications

    Science.gov (United States)

    Tran, Le-Giang; Cha, Hyouk-Kyu; Park, Woo-Tae

    2017-12-01

    Wireless power transmission was conceptualized nearly a century ago. Certain achievements made to date have made power harvesting a reality, capable of providing alternative sources of energy. This review provides a summ ary of radio frequency (RF) power harvesting technologies in order to serve as a guide for the design of RF energy harvesting units. Since energy harvesting circuits are designed to operate with relatively small voltages and currents, they rely on state-of-the-art electrical technology for obtaining high efficiency. Thus, comprehensive analysis and discussions of various designs and their tradeoffs are included. Finally, recent applications of RF power harvesting are outlined.

  12. Design Thinking: A Methodology towards Sustainable Problem Solving in Higher Education in South Africa

    Science.gov (United States)

    Munyai, Keneilwe

    2016-01-01

    This short paper explores the potential contribution of design thinking methodology to the education and training system in South Africa. Design thinking is slowly gaining traction in South Africa. Design Thinking is gaining traction in South Africa. There is offered by the Hasso Plattner Institute of Design Thinking at the University of Cape Town…

  13. Development of a combat aircraft operational and cost-effectiveness design methodology

    OpenAIRE

    Nilubol, Otsin

    2005-01-01

    This study set out to develop an aircraft design methodology, which gives com- bat aircraft more operational and cost-effectiveness by considering these factors early in the design process. In this methodology, an aircraft will be considered as a sub-system of an overall system, representing an entire operation scenario. Measures of operational and operational cost-effectiveness indicate the quality of, and relationships between, the major design aspects; i. e. susceptibility, ...

  14. A performance-oriented power transformer design methodology using multi-objective evolutionary optimization

    OpenAIRE

    Adly, Amr A.; Abd-El-Hafiz, Salwa K.

    2014-01-01

    Transformers are regarded as crucial components in power systems. Due to market globalization, power transformer manufacturers are facing an increasingly competitive environment that mandates the adoption of design strategies yielding better performance at lower costs. In this paper, a power transformer design methodology using multi-objective evolutionary optimization is proposed. Using this methodology, which is tailored to be target performance design-oriented, quick rough estimation of tr...

  15. A conceptual design methodology for low speed high altitude long endurance unmanned aerial vehicles

    OpenAIRE

    Altman, Aaron

    2000-01-01

    A conceptual design methodology was produced and subsequently coded into a Visual C++ (GUI) environment to facilitate the rapid comparison of several possible configurations to satisfy High Altitude Long Endurance (FIALE) unmanned aircraft (UAV) missions in the Low Speed (propeller driven aircraft) regime. Several comparative studies were performed to verify the applicability of traditional design methods. The traditional computational design methodologies fail in several areas...

  16. Application of response surface methodology method in designing corrosion inhibitor

    Science.gov (United States)

    Asmara, Y. P.; Athirah; Siregar, J. P.; Kurniawan, T.; Bachtiar, D.

    2017-10-01

    In oil and gas pipelines and offshore structure, inhibitors have been considered to be the first choice to reduce corrosion rate. There are many corrosion inhibitor compositions available in the market. To produce the best corrosion inhibitor requires many experimental data which is not efficient. These experiments used response surface methodology (RSM) to select corrosion inhibitor compositions. The experiments investigated effects of corrosion inhibition on corrosion rate of low carbon steel in 3% NaCl solution with different concentrations of selected main inhibitor compositions which are ethyl acetate (EA), ethylene glycol (EG) and sodium benzoate (SB). Corrosion rate were calculated using linear polarization resistance (LPR). All of the experiments were set in natural conditions at pH 7. MINITAB® version 15 was used for data analysis. It is shown that a quadratic model is a representative model can predict best corrosion inhibitor composition comprehensibly.

  17. Organic, bionics & blob design - conceptual and methodological clarification

    DEFF Research Database (Denmark)

    Thomsen, Bente Dahl

    2015-01-01

    Industrial design is a young field of science that works together with many disciplines, borrows concepts and constructs metaphors for product characterization and phenomenon description. The meaning of the penetrative or constructed concepts is crystallized over time through academic writings...

  18. Tackling the Survey: A Learning-by-Induction Design

    Science.gov (United States)

    Witte, Anne E.

    2017-01-01

    Free online survey tools provide a practical learning-by-induction platform for business communication instructors interested in trying out an advanced multidisciplinary survey activity coupled with an innovative teaching design. More than just building skills in marketing, survey projects marshal a wider set of thinking and doing activities that…

  19. Design and Validation of the Quantum Mechanics Conceptual Survey

    Science.gov (United States)

    McKagan, S. B.; Perkins, K. K.; Wieman, C. E.

    2010-01-01

    The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students' conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included…

  20. Sample design considerations of indoor air exposure surveys

    International Nuclear Information System (INIS)

    Cox, B.G.; Mage, D.T.; Immerman, F.W.

    1988-01-01

    Concern about the potential for indoor air pollution has prompted recent surveys of radon and NO 2 concentrations in homes and personal exposure studies of volatile organics, carbon monoxide and pesticides, to name a few. The statistical problems in designing sample surveys that measure the physical environment are diverse and more complicated than those encountered in traditional surveys of human attitudes and attributes. This paper addresses issues encountered when designing indoor air quality (IAQ) studies. General statistical concepts related to target population definition, frame creation, and sample selection for area household surveys and telephone surveys are presented. The implications of different measurement approaches are discussed, and response rate considerations are described

  1. Improving Clinical Trial Participant Tracking Tools Using Knowledge-anchored Design Methodologies.

    Science.gov (United States)

    Payne, Philip R O; Embi, Peter J; Johnson, Stephen B; Mendonca, Eneida; Starren, Justin

    2010-01-01

    OBJECTIVE: Rigorous human-computer interaction (HCI) design methodologies have not traditionally been applied to the development of clinical trial participant tracking (CTPT) tools. Given the frequent us of iconic HCI models in CTPTs, and prior evidence of usability problems associated with the use of ambiguous icons in complex interfaces, such approaches may be problematic. Presentation Discovery (PD), a knowledge-anchored HCI design method, has been previously demonstrated to improve the design of iconic HCI models. In this study, we compare the usability of a CTPT HCI model designed using PD and an intuitively designed CTPT HCI model. METHODS: An iconic CPTP HCI model was created using PD. The PD-generated and an existing iconic CTPT HCI model were subjected to usability testing, with an emphasis on task accuracy and completion times. Study participants also completed a qualitative survey instrument to evaluate subjective satisfaction with the two models. RESULTS: CTPT end-users reliably and reproducibly agreed on the visual manifestation and semantics of prototype graphics generated using PD. The performance of the PD-generated iconic HCI model was equivalent to an existing HCI model for tasks at multiple levels of complexity, and in some cases superior. This difference was particularly notable when tasks required an understanding of the semantic meanings of multiple icons. CONCLUSION: The use of PD to design an iconic CTPT HCI model generated beneficial results and improved end-user subjective satisfaction, while reducing task completion time. Such results are desirable in information and time intensive domains, such as clinical trials management.

  2. The mechanical design of a transfemoral prosthesis using computational tools and design methodology

    Directory of Open Access Journals (Sweden)

    John Sánchez Otero

    2012-09-01

    Full Text Available Artificial limb replacement with lower limb prostheses has been widely reported in current scientific literature. There are many lower limb prosthetic designs ranging from a single-axis knee mechanism to complex mechanisms involving microcontrollers, made from many materials ranging from lightweight, high specific strength ones (e.g., carbon fibre to traditional forms (e.g., stainless steel. However, the challenge is to design prostheses whose movement resembles the human body’s natural movement as closely as possible. Advances in prosthetics have enabled many amputees to return to their everyday activities; however, such prostheses are expensive, some costing as much as $60,000. Many of the affected population in Colombia have scarce economic resources; there is therefore a need to develop affordable functional prostheses.The Universidad del Norte’s Materials, Processes and Design Research Group and the Robotics and Intelligent Systems Group have been working on this line of research to develop modular prostheses which can be adjusted to each patient’s requirements. This research represents an initial methodological approach to developing a prosthesis in which software tools have been used (the finite element method with a criteria relationship matrix for selecting the best alternative while considering different aspects such as mod-ularity, cost, stiffness and weight.

  3. Design methodology of single-feed compact near-isotropic antenna design

    KAUST Repository

    Su, Zhen

    2017-06-07

    The abundance of mobile wireless devices is giving rise to a new paradigm known as Internet of Things. In this paradigm, wireless devices will be everywhere and communicating with each other. Since they will be oriented randomly in the environment, they should be able to communicate equally in all directions in order to have stable communication link. Hence, compact near isotropic antennas are required, which can enable orientation insensitive communication. In this paper, we propose a simple design methodology to design a compact near-isotropic wire antenna based on equal vector potentials. As a proof of concept, a quarter wavelength monopole antennas has been designed that is wrapped on a 3D-printed box keeping the vector potentials in three orthogonal different directions equal. By optimizing the dimension of the antenna arms, a nearly isotropic radiation pattern is thus achieved. The results show that the antenna has a maximum gain of 2.2dBi at 900 MHz with gain derivation of 9.4dB.

  4. Methodology for modular nuclear plant design and construction

    International Nuclear Information System (INIS)

    Lapp, C.W.; Golay, M.

    1992-01-01

    During the past decade, the rising cost of nuclear power plant construction has caused the cancellation of many projects and has forced some utilities into bankruptcy. Many factors have contributed to capital cost increases, including regulatory changes, the absence of standard designs, and low worker productivity. Low worker productivity can be attributed to the conventional building process, which is not conductive to productive labor. This study presents innovative ways to reduce the capital cost of nuclear plants through more efficient construction processes designed to increase worker productivity. A major portion of the plant capital cost is the interest paid during construction on borrowed capital. Modular fabrication could potentially reduce interest payments by compressing the construction schedule of nuclear facilities. Additional cost savings expected from modular designs arise from improved quality, productivity, and schedule control in fabrication of plant elements within a factory environment

  5. Analysis of methodology for designing education and training model for professional development in the field of radiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kon Wuk; Lee, Jae Hun; Park, Tai Jin; Song, Myung Jae [Korean Association for Radiation Application, Seoul (Korea, Republic of)

    2015-02-15

    The domestic Radiation Technology is integrated into and utilized in various areas and is closely related to the industrial growth in Korea. The domestic use of radiation and RI (Radioisotope) increases in quantity every year, however the level of technology is poor when compared to other developed countries. Manpower training is essential for the development of Radiation Technology. Therefore, this study aimed to propose a methodology for designing systemic education and training model in the field of measurement and analysis of radiation. A survey was conducted to design education and training model and the training program for measurement and analysis of radiation was developed based on the survey results. The education and training program designed in this study will be utilized as a model for evaluating the professional development and effective recruitment of the professional workforce, and can be further applied to other radiation-related fields.

  6. Analysis of methodology for designing education and training model for professional development in the field of radiation technology

    International Nuclear Information System (INIS)

    Kim, Kon Wuk; Lee, Jae Hun; Park, Tai Jin; Song, Myung Jae

    2015-01-01

    The domestic Radiation Technology is integrated into and utilized in various areas and is closely related to the industrial growth in Korea. The domestic use of radiation and RI (Radioisotope) increases in quantity every year, however the level of technology is poor when compared to other developed countries. Manpower training is essential for the development of Radiation Technology. Therefore, this study aimed to propose a methodology for designing systemic education and training model in the field of measurement and analysis of radiation. A survey was conducted to design education and training model and the training program for measurement and analysis of radiation was developed based on the survey results. The education and training program designed in this study will be utilized as a model for evaluating the professional development and effective recruitment of the professional workforce, and can be further applied to other radiation-related fields

  7. A methodology for the design of photovoltaic water supply systems

    International Nuclear Information System (INIS)

    Vilela, O.C.; Fraidenraich, N.

    2001-01-01

    Photovoltaic pumping systems are used nowadays as a valuable alternative to supply water to communities living in remote rural areas. Owing to the seasonal variation and the stochastic behavior of solar radiation, at certain times the supply of water may not be able to meet demand. A study has been made of the relationship between water pumping capacity, reservoir size and water demand, for a given water deficit. As a result, curves of equal water deficit (iso-deficit lines) can be obtained for various combinations of PV pumping capacity and reservoir size. A methodology to generate those curves is described, using as its main tool the characteristic curve of the system, that is, the relationship between water flow and collected solar radiation. The characteristic curve represents the combined behavior of the water pumping system and the well. The influence of the minimum collected solar radiation level, necessary to start the system's operation (the critical radiation level I C ). is also analyzed. Results show that PV pumping systems with different characteristic curves, but with the same critical levels, yield the same set of iso-deficit lines. This drastically reduces the number of necessary solutions to those corresponding to a few values of I C . Iso-deficit lines, calculated for the locality of Recife (PE), Brazil, are used to illustrate the sizing procedure PV water supply systems. (author)

  8. Design methodologies for reliability of SSL LED boards

    NARCIS (Netherlands)

    Jakovenko, J.; Formánek, J.; Perpiñà, X.; Jorda, X.; Vellvehi, M.; Werkhoven, R.J.; Husák, M.; Kunen, J.M.G.; Bancken, P.; Bolt, P.J.; Gasse, A.

    2013-01-01

    This work presents a comparison of various LED board technologies from thermal, mechanical and reliability point of view provided by an accurate 3-D modelling. LED boards are proposed as a possible technology replacement of FR4 LED boards used in 400 lumen retrofit SSL lamps. Presented design

  9. Kids in the city study: research design and methodology

    Directory of Open Access Journals (Sweden)

    Kaiwai Hector

    2011-07-01

    Full Text Available Abstract Background Physical activity is essential for optimal physical and psychological health but substantial declines in children's activity levels have occurred in New Zealand and internationally. Children's independent mobility (i.e., outdoor play and traveling to destinations unsupervised, an integral component of physical activity in childhood, has also declined radically in recent decades. Safety-conscious parenting practices, car reliance and auto-centric urban design have converged to produce children living increasingly sedentary lives. This research investigates how urban neighborhood environments can support or enable or restrict children's independent mobility, thereby influencing physical activity accumulation and participation in daily life. Methods/Design The study is located in six Auckland, New Zealand neighborhoods, diverse in terms of urban design attributes, particularly residential density. Participants comprise 160 children aged 9-11 years and their parents/caregivers. Objective measures (global positioning systems, accelerometers, geographical information systems, observational audits assessed children's independent mobility and physical activity, neighborhood infrastructure, and streetscape attributes. Parent and child neighborhood perceptions and experiences were assessed using qualitative research methods. Discussion This study is one of the first internationally to examine the association of specific urban design attributes with child independent mobility. Using robust, appropriate, and best practice objective measures, this study provides robust epidemiological information regarding the relationships between the built environment and health outcomes for this population.

  10. Dictionary quality and dictionary design: a methodology for ...

    African Journals Online (AJOL)

    Although recent dictionaries for the ESL market have been praised for their innovative design features, the prime concern of users, lexicographers and metalexicographers is the functional quality of the dictionary products provided for the market. The functional quality of dictionaries and the scientific assessment thereof ...

  11. Situated Research Design and Methodological Choices in Formative Program Evaluation

    Science.gov (United States)

    Supovitz, Jonathan

    2013-01-01

    Design-based implementation research offers the opportunity to rethink the relationships between intervention, research, and situation to better attune research and evaluation to the program development process. Using a heuristic called the intervention development curve, I describe the rough trajectory that programs typically follow as they…

  12. Methodology for the analysis of dietary data from the Mexican National Health and Nutrition Survey 2006.

    Science.gov (United States)

    Rodríguez-Ramírez, Sonia; Mundo-Rosas, Verónica; Jiménez-Aguilar, Alejandra; Shamah-Levy, Teresa

    2009-01-01

    To describe the methodology for the analysis of dietary data from the Mexican National Health and Nutrition Survey 2006 (ENSANUT 2006) carried out in Mexico. Dietary data from the population who participated in the ENSANUT 2006 were collected through a 7-day food-frequency questionnaire. Energy and nutrient intake of each food consumed and adequacy percentage by day were also estimated. Intakes and adequacy percentages > 5 SDs from the energy and nutrient general distribution and observations with energy adequacy percentages < 25% were excluded from the analysis. Valid dietary data were obtained from 3552 children aged 1 to 4 years, 8716 children aged 5 to 11 years, 8442 adolescents, 15951 adults, and 3357 older adults. It is important to detail the methodology for the analysis of dietary data to standardize data cleaning criteria and to be able to compare the results of different studies.

  13. U.S. Geological Survey Methodology Development for Ecological Carbon Assessment and Monitoring

    Science.gov (United States)

    Zhu, Zhi-Liang; Stackpoole, S.M.

    2009-01-01

    Ecological carbon sequestration refers to transfer and storage of atmospheric carbon in vegetation, soils, and aquatic environments to help offset the net increase from carbon emissions. Understanding capacities, associated opportunities, and risks of vegetated ecosystems to sequester carbon provides science information to support formulation of policies governing climate change mitigation, adaptation, and land-management strategies. Section 712 of the Energy Independence and Security Act (EISA) of 2007 mandates the Department of the Interior to develop a methodology and assess the capacity of our nation's ecosystems for ecological carbon sequestration and greenhouse gas (GHG) flux mitigation. The U.S. Geological Survey (USGS) LandCarbon Project is responding to the Department of Interior's request to develop a methodology that meets specific EISA requirements.

  14. Anti-Semitism and criticism of Israel: Methodology and results of the ASCI survey

    Directory of Open Access Journals (Sweden)

    Wilhelm Kempf

    2015-04-01

    Full Text Available Building upon psychological conflict theory, on the one hand, and item-response models, on the other, the present paper develops an integrated methodology that aims at differentiating the various ways of criticizing Israel. An application of this methodology to the Anti-Semitism and Criticism of Israel (ASCI survey found two ways of criticizing Israel resulting from two different and antipodal processes. (1 Anti-Semitic criticism of Israel is generally laden with prejudice and shares not only anti-Semitic, anti-Zionist and anti-Israeli, but also anti-Palestinian resentments as well. (2 Non-anti-Semitic criticism of Israel is motivated by pacifism and human rights commitment and rejects any form of anti-Semitic, anti-Zionist, anti-Israeli or anti-Palestinian resentment. However, even critics of Israel who were not originally motivated by anti-Semitism are also in danger of developing anti-Semitic prejudices.

  15. The importance of the application context for the design of Social LCA methodology

    DEFF Research Database (Denmark)

    Jørgensen, Andreas

    it is applied. The purpose of this study is to fill this gap by analyzing the conditions and constraints that the context of application sets for the design of Social LCA methodology and to suggest methodological approaches that account for these contextual constraints and conditions. The relevant context...

  16. A systematic synthesis and design methodology to achieve process intensification in (bio) chemical processes

    DEFF Research Database (Denmark)

    Lutze, Philip; Roman Martinez, Alicia; Woodley, John

    2012-01-01

    be intensified for the biggest improvement is difficult to identify. In this paper the development of a systematic computer aided model-based synthesis and design methodology incorporating PI is presented. In order to manage the complexities involved, the methodology employs a decomposition-based solution...... the chemo-enzymatic synthesis of N-acetyl-d-neuraminic acid (Neu5Ac)....

  17. Survey design research: a tool for answering nursing research questions.

    Science.gov (United States)

    Siedlecki, Sandra L; Butler, Robert S; Burchill, Christian N

    2015-01-01

    The clinical nurse specialist is in a unique position to identify and study clinical problems in need of answers, but lack of time and resources may discourage nurses from conducting research. However, some research methods can be used by the clinical nurse specialist that are not time-intensive or cost prohibitive. The purpose of this article is to explain the utility of survey methodology for answering a number of nursing research questions. The article covers survey content, reliability and validity issues, sample size considerations, and methods of survey delivery.

  18. Synthesizing exoplanet demographics from radial velocity and microlensing surveys. I. Methodology

    International Nuclear Information System (INIS)

    Clanton, Christian; Gaudi, B. Scott

    2014-01-01

    Motivated by the order of magnitude difference in the frequency of giant planets orbiting M dwarfs inferred by microlensing and radial velocity (RV) surveys, we present a method for comparing the statistical constraints on exoplanet demographics inferred from these methods. We first derive the mapping from the observable parameters of a microlensing-detected planet to those of an analogous planet orbiting an RV-monitored star. Using this mapping, we predict the distribution of RV observables for the planet population inferred from microlensing surveys, taking care to adopt reasonable priors for, and properly marginalize over, the unknown physical parameters of microlensing-detected systems. Finally, we use simple estimates of the detection limits for a fiducial RV survey to predict the number and properties of analogs of the microlensing planet population such an RV survey should detect. We find that RV and microlensing surveys have some overlap, specifically for super-Jupiter mass planets (m p ≳ 1 M Jup ) with periods between ∼3-10 yr. However, the steeply falling planetary mass function inferred from microlensing implies that, in this region of overlap, RV surveys should infer a much smaller frequency than the overall giant planet frequency (m p ≳ 0.1 M Jup ) inferred by microlensing. Our analysis demonstrates that it is possible to statistically compare and synthesize data sets from multiple exoplanet detection techniques in order to infer exoplanet demographics over wider regions of parameter space than are accessible to individual methods. In a companion paper, we apply our methodology to several representative microlensing and RV surveys to derive the frequency of planets around M dwarfs with orbits of ≲ 30 yr.

  19. Drag &Drop, Mixed-Methodology-based Lab-on-Chip Design Optimization Software, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall objective is to develop a ?mixed-methodology?, drag and drop, component library (fluidic-lego)-based, system design and optimization tool for complex...

  20. An architecture and methodology for the design and development of Technical Information Systems

    NARCIS (Netherlands)

    Capobianchi, R.; Mautref, M.; van Keulen, Maurice; Balsters, H.

    In order to meet demands in the context of Technical Information Systems (TIS) pertaining to reliability, extensibility, maintainability, etc., we have developed an architectural framework with accompanying methodological guidelines for designing such systems. With the framework, we aim at complex

  1. A wing design methodology for low-boom low-drag supersonic business jet

    Science.gov (United States)

    Le, Daniel B.

    2009-12-01

    The arguably most critical hindrance to the successful development of a commercial supersonic aircraft is the impact of the sonic boom signature. The sonic boom signature of a supersonic aircraft is predicted using sonic boom theory, which formulates a relationship between the complex three-dimensional geometry of the aircraft to the pressure distribution and decomposes the geometry in terms of simple geometrical components. The supersonic aircraft design process is typically based on boom minimization theory. This theory provides a theoretical equivalent area distribution which should be matched by the conceptual design in order to achieve the pre-determined sonic boom signature. The difference between the target equivalent area distribution and the actual equivalent area distribution is referred to here as the gap distribution. The primary intent of this dissertation is to provide the designer with a systematic and structured approach to designing the aircraft wings with limited changes to the baseline concept while achieving critical design goals. The design process can be easily overwhelmed and may be difficult to evaluate their effectiveness. The wing design is decoupled into two separate processes, one focused on the planform design and the other on the camber design. Moreover, this design methodology supplements the designer by allowing trade studies to be conducted between important design parameters and objectives. The wing planform design methodology incorporates a continuous gradient-based optimization scheme to supplement the design process. This is not meant to substitute the vast amount of knowledge and design decisions that are needed for a successful design. Instead, the numerical optimization helps the designer to refine creative concepts. Last, this dissertation integrates a risk mitigation scheme throughout the wing design process. The design methodology implements minimal design changes to the wing geometry white achieving the target design goal

  2. Advanced design methodologies and novel applications of reflectarray antennas

    Science.gov (United States)

    Nayeri, Payam

    Reflectarray antennas combine the numerous advantages of printed antenna arrays and reflector antennas and create a hybrid high-gain antenna with a low-profile, low-mass, and diversified radiation performance. Reflectarrays are now emerging as the new generation of high-gain antennas for long-distance communications. In this dissertation, some advanced concepts demonstrating novel features of reflectarray antennas are presented. • First, various approaches for radiation analysis of reflectarray antennas are described and implemented. Numerical results are then presented for a variety of systems and the advantages, limitations, and accuracy of these approaches are discussed and compared with each other. • A broadband technique by using sub-wavelength elements is proposed and prototypes are fabricated and tested. This technique enables the reflectarray to achieve a significant bandwidth improvement with no additional cost. • Infrared reflectarrays antennas are studied for possible applications in concentrating solar power systems. Material losses, an important design issue at infrared frequencies, are investigated and reflectarrays consisted of dielectric resonant elements are proposed with low-loss features at infrared. • Multi-beam reflectarray antennas are studied and it is demonstrated that by optimizing the phase of the elements, a desirable multi-beam performance can be achieved using a single-feed. Local and global phase-only optimization techniques have been implemented. Two Ka-band quad-beam prototypes with symmetric and asymmetric beams have been fabricated and tested. • Different approaches for beam-scanning with reflectarray antennas are also reviewed and it is shown that for moderately wide angle beam-scanning, utilizing a feed displacement technique is more suitable than an aperture phase tuning approach. A feed displacement beam-scanning design with novel aperture phase distribution is proposed for the reflectarray antenna, and is further

  3. Designing with Space Syntax : A configurative approach to architectural layout, proposing a computational methodology

    NARCIS (Netherlands)

    Nourian, P.; Rezvani, S.; Sariyildiz, I.S.

    2013-01-01

    This paper introduces a design methodology and a toolkit developed as a parametric CAD program for configurative design of architectural plan layouts. Using this toolkit, designers can start plan layout process with sketching the way functional spaces need to connect to each other. A tool draws an

  4. A comprehensive survey of brain interface technology designs.

    Science.gov (United States)

    Mason, S G; Bashashati, A; Fatourechi, M; Navarro, K F; Birch, G E

    2007-02-01

    In this work we present the first comprehensive survey of Brain Interface (BI) technology designs published prior to January 2006. Detailed results from this survey, which was based on the Brain Interface Design Framework proposed by Mason and Birch, are presented and discussed to address the following research questions: (1) which BI technologies are directly comparable, (2) what technology designs exist, (3) which application areas (users, activities and environments) have been targeted in these designs, (4) which design approaches have received little or no research and are possible opportunities for new technology, and (5) how well are designs reported. The results of this work demonstrate that meta-analysis of high-level BI design attributes is possible and informative. The survey also produced a valuable, historical cross-reference where BI technology designers can identify what types of technology have been proposed and by whom.

  5. A systematic synthesis and design methodology to achieve process intensification in (bio) chemical processes

    DEFF Research Database (Denmark)

    Lutze, Philip; Woodley, John; Gani, Rafiqul

    be intensified for biggest improvement, process synthesis and design tools are applied which results in the development of a systematic methodology incorporating PI. In order to manage the complexity of PI process options in which a feasible and optimal process solution may exist, the solution procedure......, the application of the computer-aided systematic synthesis and design methodology is highlighted via a case study which is the chemo-enzymatic synthesis of N-acetyl-D-neuraminic acid (Neu5Ac))....

  6. Design and Development of Carborne Survey Equipment

    Directory of Open Access Journals (Sweden)

    Syarbaini

    2015-08-01

    Full Text Available In most nuclear and radiological emergencies involving the release of radioactive materials to environment, it is important that data on the geographic distribution of potentially hazardous radioactive materials be quickly presented to the authorities. The mobile radiation detection system makes it possible to measure radioactive materials in the environment at random places because of its easy mobility from place to place. The purpose of the work is to develop a mobile radiation detection system to measure gamma exposure rate, radioactive material on the ground and airborne radioactive particulate in the environment quickly. In this work, we have developed a carborne survey equipment system consisting of three gamma ray detectors, one airbome radioactive particulate sampler, a GPS (Global Positioning System, meteorological sensors, a data acquisition system and an operation software. Performance of the carborne survey equipment has been successfully demonstrated to measure iodine and argon release from medical isotope production facility on Serpong in western Java, Indonesia.

  7. Trajectory Design for the Transiting Exoplanet Survey Satellite

    Science.gov (United States)

    Dichmann, Donald J.; Parker, Joel J. K.; Williams, Trevor W.; Mendelsohn, Chad R.

    2014-01-01

    The Transiting Exoplanet Survey Satellite (TESS) is a National Aeronautics and Space Administration (NASA) mission, scheduled to be launched in 2017. TESS will travel in a highly eccentric orbit around Earth, with initial perigee radius near 17 Earth radii (Re) and apogee radius near 59 Re. The orbit period is near 2:1 resonance with the Moon, with apogee nearly 90 degrees out-of-phase with the Moon, in a configuration that has been shown to be operationally stable. TESS will execute phasing loops followed by a lunar flyby, with a final maneuver to achieve 2:1 resonance with the Moon. The goals of a resonant orbit with long-term stability, short eclipses and limited oscillations of perigee present significant challenges to the trajectory design. To rapidly assess launch opportunities, we adapted the Schematics Window Methodology (SWM76) launch window analysis tool to assess the TESS mission constraints. To understand the long-term dynamics of such a resonant orbit in the Earth-Moon system we employed Dynamical Systems Theory in the Circular Restricted 3-Body Problem (CR3BP). For precise trajectory analysis we use a high-fidelity model and multiple shooting in the General Mission Analysis Tool (GMAT) to optimize the maneuver delta-V and meet mission constraints. Finally we describe how the techniques we have developed can be applied to missions with similar requirements. Keywords: resonant orbit, stability, lunar flyby, phasing loops, trajectory optimization

  8. Bibliographic survey on methodologies for development of health database of the population in case of cancer occurrences

    International Nuclear Information System (INIS)

    Cavinato, Christianne C.; Andrade, Delvonei A. de; Sabundjian, Gaiane; Diz, Maria Del Pilar E.

    2014-01-01

    The objective is to make a survey of existing methodologies and for the development of public health database, focusing on health (fatal and nonfatal cancer) of the population surrounding a nuclear facility, for purposes of calculating the environmental cost of the same. From methodologies found to develop this type of database, a methodology will be developed to be applied to the internal public of IPEN/CNEN-SP, Brazil, as a pre-test for the acquisition of health information desired

  9. Design Methodology of Large-scale Thermoelectric Generation

    DEFF Research Database (Denmark)

    Chen, Min; Gao, Junling; Zhu, Junpeng

    2011-01-01

    A thermoelectric generation system (TEGS) consists of not only thermoelectric modules (TEMs), but also the external load circuitry and the fluidic heat sources. In this paper, a system-level model is proposed in the SPICE-compatible environment to seamlessly integrate the complete fluid-thermal-e......A thermoelectric generation system (TEGS) consists of not only thermoelectric modules (TEMs), but also the external load circuitry and the fluidic heat sources. In this paper, a system-level model is proposed in the SPICE-compatible environment to seamlessly integrate the complete fluid...... modeling and design scalable, flexible, and programmable. To validate the proposed system model, a TEGS including 8 TEMs is constructed. Through comparisons between simulation results and experimental data, it is clear that the cooptimization of the entire TEGS is enabled by the proposed model....

  10. Friction and wear methodologies for design and control

    CERN Document Server

    Straffelini, Giovanni

    2015-01-01

    This book introduces the basic concepts of contact mechanics, friction, lubrication, and wear mechanisms, providing simplified analytical relationships that are useful for quantitative assessments. Subsequently, an overview on the main wear processes is provided, and guidelines on the most suitable design solutions for each specific application are outlined. The final part of the text is devoted to a description of the main materials and surface treatments specifically developed for tribological applications and to the presentation of tribological systems of particular engineering relevance. The text is up to date with the latest developments in the field of tribology and provides a theoretical framework to explain friction and wear problems, together with practical tools for their resolution. The text is intended for students on Engineering courses (both bachelor and master degrees) who must develop a sound understanding of friction, wear, lubrication, and surface engineering, and for technicians or professi...

  11. Estimates of Non-Heterosexual Prevalence: The Roles of Anonymity and Privacy in Survey Methodology.

    Science.gov (United States)

    Robertson, Ronald E; Tran, Felix W; Lewark, Lauren N; Epstein, Robert

    2017-08-07

    When do people feel comfortable enough to provide honest answers to sensitive questions? Focusing specifically on sexual orientation prevalence-a measure that is sensitive to the pressures of heteronormativity-the present study was conducted to examine the variability in U.S. estimates of non-heterosexual identity prevalence and to determine how comfortable people are with answering questions about their sexual orientation when asked through commonly used survey modes. We found that estimates of non-heterosexual prevalence in the U.S. increased as the privacy and anonymity of the survey increased. Utilizing an online questionnaire, we rank-ordered 16 survey modes by asking people to rate their level of comfort with each mode in the context of being asked questions about their sexual orientation. A demographically diverse sample of 652 individuals in the U.S. rated each mode on a scale from -5 (very uncomfortable) to +5 (very comfortable). Modes included anonymous (name not required) and non-anonymous (name required) versions of questions, as well as self-administered and interviewer-administered versions. Subjects reported significantly higher mean comfort levels with anonymous modes than with non-anonymous modes and significantly higher mean comfort levels with self-administered modes than with interviewer-administered modes. Subjects reported the highest mean comfort level with anonymous online surveys and the lowest with non-anonymous personal interviews that included a video recording. Compared with the estimate produced by an online survey with a nationally representative sample, surveys utilizing more intrusive methodologies may have underestimated non-heterosexual prevalence in the U.S. by between 50 and 414%. Implications for public policy are discussed.

  12. Design-Build Partnership Attributes Survey Analysis

    National Research Council Canada - National Science Library

    Pyle, Raymond

    1998-01-01

    Two basic hypotheses were investigated: 1. Finding these attributes for success for a design-build partnership may be accomplished by transferring concepts and ideas from business research on partnership formation. 2...

  13. A design methodology for evolutionary air transportation networks

    Science.gov (United States)

    Yang, Eunsuk

    The air transportation demand at large hubs in the U.S. is anticipated to double in the near future. Current runway construction plans at selected airports can relieve some capacity and delay problems, but many are doubtful that this solution is sufficient to accommodate the anticipated demand growth in the National Airspace System (NAS). With the worsening congestion problem, it is imperative to seek alternative solutions other than costly runway constructions. In this respect, many researchers and organizations have been building models and performing analyses of the NAS. However, the complexity and size of the problem results in an overwhelming task for transportation system modelers. This research seeks to compose an active design algorithm for an evolutionary airline network model so as to include network specific control properties. An airline network designer, referred to as a network architect, can use this tool to assess the possibilities of gaining more capacity by changing the network configuration. Since the Airline Deregulation Act of 1978, the airline service network has evolved into a distinct Hub-and-Spoke (H&S) network. Enplanement demand on the H&S network is the sum of Origin-Destination (O-D) demand and transfer demand. Even though the flight or enplanement demand is a function of O-D demand and passenger routings on the airline network, the distinction between enplanement and O-D demand is not often made. Instead, many demand forecast practices in current days are based on scale-ups from the enplanements, which include the demand to and from transferring network hubs. Based on this research, it was found that the current demand prediction practice can be improved by dissecting enplanements further into smaller pieces of information. As a result, enplanement demand is decomposed into intrinsic and variable parts. The proposed intrinsic demand model is based on the concept of 'true' O-D demand which includes the direction of each round trip

  14. Cocaine use reduction with buprenorphine (CURB): rationale, design, and methodology.

    Science.gov (United States)

    Mooney, Larissa J; Nielsen, Suzanne; Saxon, Andrew; Hillhouse, Maureen; Thomas, Christie; Hasson, Albert; Stablein, Don; McCormack, Jennifer; Lindblad, Robert; Ling, Walter

    2013-03-01

    Effective medications to treat cocaine dependence have not been identified. Recent pharmacotherapy trials demonstrate the potential efficacy of buprenorphine (BUP) (alone or with naltrexone) for reducing cocaine use. The National Institute on Drug Abuse Clinical Trials Network (CTN) launched the Cocaine Use Reduction with Buprenorphine (CURB) investigation to examine the safety and efficacy of sublingual BUP (as Suboxone®) in the presence of extended-release injectable naltrexone (XR-NTX, as Vivitrol®) for the treatment of cocaine dependence. This paper describes the design and rationale for this study. This multi-site, double-blind, placebo-controlled study will randomize 300 participants across 11 sites. Participants must meet the DSM-IV criteria for cocaine dependence and past or current opioid dependence or abuse. Participants are inducted onto XR-NTX after self-reporting at least 7 days of abstinence from opioids and tolerating a naloxone challenge followed by oral naltrexone and are then randomly assigned to one of three medication conditions (4 mg BUP, 16 mg BUP, or placebo) for 8 weeks. Participants receive a second injection of XR-NTX 4 weeks after the initial injection, and follow-up visits are scheduled at 1 and 3 months post-treatment. Participants receive weekly cognitive behavioral therapy (CBT). Recruitment commenced in September, 2011. Enrollment, active medication, and follow-up phases are ongoing, and recruitment is exceeding targeted enrollment rates. This research using 2 medications will demonstrate whether BUP, administered in the presence of XR-NTX, reduces cocaine use in adults with cocaine dependence and opioid use disorders and will demonstrate if XR-NTX prevents development of physiologic dependence on BUP. Copyright © 2012 Elsevier Inc. All rights reserved.

  15. Developing a Design Methodology for Web 2.0 Mediated Learning

    DEFF Research Database (Denmark)

    Buus, Lillian; Georgsen, Marianne; Ryberg, Thomas

    2010-01-01

    Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning......In this paper we discuss the notion of a learning methodology and situate this within the wider frame of learning design or “Designing for Learning”. We discuss existing work within this broad area by trying to categorize different approaches and interpretations and we present our development...... within the EAtrain2 project as a way of enabling teachers and practitioners to collaboratively design courses. As part of the collaborative e-learning design (CoED) method and the broader learning methodology the authors held a workshop for the project partners in the EATrain2 project, and the results...

  16. Doctoral training in statistics, measurement, and methodology in psychology: replication and extension of Aiken, West, Sechrest, and Reno's (1990) survey of PhD programs in North America.

    Science.gov (United States)

    Aiken, Leona S; West, Stephen G; Millsap, Roger E

    2008-01-01

    In a survey of all PhD programs in psychology in the United States and Canada, the authors documented the quantitative methodology curriculum (statistics, measurement, and research design) to examine the extent to which innovations in quantitative methodology have diffused into the training of PhDs in psychology. In all, 201 psychology PhD programs (86%) participated. This survey replicated and extended a previous survey (L. S. Aiken, S. G. West, L. B. Sechrest, & R. R. Reno, 1990), permitting examination of curriculum development. Most training supported laboratory and not field research. The median of 1.6 years of training in statistics and measurement was mainly devoted to the modally 1-year introductory statistics course, leaving little room for advanced study. Curricular enhancements were noted in statistics and to a minor degree in measurement. Additional coverage of both fundamental and innovative quantitative methodology is needed. The research design curriculum has largely stagnated, a cause for great concern. Elite programs showed no overall advantage in quantitative training. Forces that support curricular innovation are characterized. Human capital challenges to quantitative training, including recruiting and supporting young quantitative faculty, are discussed. Steps must be taken to bring innovations in quantitative methodology into the curriculum of PhD programs in psychology. PsycINFO Database Record (c) 2008 APA, all rights reserved.

  17. The Dark Energy Survey instrument design

    International Nuclear Information System (INIS)

    Flaugher, B.; Fermilab

    2006-01-01

    We describe a new project, the Dark Energy Survey (DES), aimed at measuring the dark energy equation of state parameter, w, to a statistical precision of ∼5%, with four complementary techniques. The survey will use a new 3 sq. deg. mosaic camera (DECam) mounted at the prime focus of the Blanco 4m telescope at the Cerro-Tololo International Observatory (CTIO). DECam includes a large mosaic camera, a five element optical corrector, four filters (g,r,i,z), and the associated infrastructure for operation in the prime focus cage. The focal plane consists of 62 2K x 4K CCD modules (0.27''/pixel) arranged in a hexagon inscribed within the 2.2 deg. diameter field of view. We plan to use the 250 micron thick fully-depleted CCDs that have been developed at the Lawrence Berkeley National Laboratory (LBNL). At Fermilab, we will establish a packaging factory to produce four-side buttable modules for the LBNL devices, as well as to test and grade the CCDs. R and D is underway and delivery of DECam to CTIO is scheduled for 2009

  18. Expectations for methodology and translation of animal research: a survey of health care workers.

    Science.gov (United States)

    Joffe, Ari R; Bara, Meredith; Anton, Natalie; Nobis, Nathan

    2015-05-07

    Health care workers (HCW) often perform, promote, and advocate use of public funds for animal research (AR); therefore, an awareness of the empirical costs and benefits of animal research is an important issue for HCW. We aim to determine what health-care-workers consider should be acceptable standards of AR methodology and translation rate to humans. After development and validation, an e-mail survey was sent to all pediatricians and pediatric intensive care unit nurses and respiratory-therapists (RTs) affiliated with a Canadian University. We presented questions about demographics, methodology of AR, and expectations from AR. Responses of pediatricians and nurses/RTs were compared using Chi-square, with P methodological quality, most respondents expect that: AR is done to high quality; costs and difficulty are not acceptable justifications for low quality; findings should be reproducible between laboratories and strains of the same species; and guidelines for AR funded with public money should be consistent with these expectations. Asked about benefits of AR, most thought that there are sometimes/often large benefits to humans from AR, and disagreed that "AR rarely produces benefit to humans." Asked about expectations of translation to humans (of toxicity, carcinogenicity, teratogenicity, and treatment findings), most: expect translation >40% of the time; thought that misleading AR results should occur methodological quality of, and the translation rate to humans of findings from AR. These expectations are higher than the empirical data show having been achieved. Unless these areas of AR significantly improve, HCW support of AR may be tenuous.

  19. Methodological studies for long range environmental gamma rate survey in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Elder M.; Wasserman, Maria Angelica V., E-mail: elder@ird.gov.b, E-mail: angelica@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Rochedo, Elaine R. R., E-mail: erochedo@cnen.gov.b [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The objective of this work is to support the establishment of a methodology for gamma radiation survey over large areas in order to estimate public exposure to natural background radiation in Brazil. In a first stage, two different sites close to large water bodies were chosen, Guanabara Bay, RJ and Amazon River close to Santarem, PA. Early results showed similar results for over water surveys despite the type of water body. Dose rates over land are higher than those over water, due to the natural radioactivity on soil, pavements and other building materials. In this study the focus was on variability of measurements performed in the same area and variability for different types of area, including roads and urbanized environments. Several measurements have been performed of several areas, that included roads and towns in Para, Bahia, Rio de Janeiro and Minas Gerais. Measurements were done by car and on boats, using a AT6101C Scanner - Spectral Radiation Scanner. Differences were detected for different areas, with roads generally presenting lower dose rates than highly urbanized areas. Also, for roads close to granite rocks and mountains, dose rates are higher than those at both coastal areas and inland lowlands. Large towns present large variability, with individual measurements close to average dose rates from anomalous uranium sites. The results will be used to derive a methodology for assessing background radiation exposure for the Brazilian population. It can be concluded that surveys are to be based on population distribution grids rather than on a simple area based grid distribution, due to both the uneven population distribution and the variability on external dose rates throughout the Brazilian territory. (author)

  20. Methodological studies for long range environmental gamma rate survey in Brazil

    International Nuclear Information System (INIS)

    Souza, Elder M.; Wasserman, Maria Angelica V.; Rochedo, Elaine R. R.

    2009-01-01

    The objective of this work is to support the establishment of a methodology for gamma radiation survey over large areas in order to estimate public exposure to natural background radiation in Brazil. In a first stage, two different sites close to large water bodies were chosen, Guanabara Bay, RJ and Amazon River close to Santarem, PA. Early results showed similar results for over water surveys despite the type of water body. Dose rates over land are higher than those over water, due to the natural radioactivity on soil, pavements and other building materials. In this study the focus was on variability of measurements performed in the same area and variability for different types of area, including roads and urbanized environments. Several measurements have been performed of several areas, that included roads and towns in Para, Bahia, Rio de Janeiro and Minas Gerais. Measurements were done by car and on boats, using a AT6101C Scanner - Spectral Radiation Scanner. Differences were detected for different areas, with roads generally presenting lower dose rates than highly urbanized areas. Also, for roads close to granite rocks and mountains, dose rates are higher than those at both coastal areas and inland lowlands. Large towns present large variability, with individual measurements close to average dose rates from anomalous uranium sites. The results will be used to derive a methodology for assessing background radiation exposure for the Brazilian population. It can be concluded that surveys are to be based on population distribution grids rather than on a simple area based grid distribution, due to both the uneven population distribution and the variability on external dose rates throughout the Brazilian territory. (author)

  1. Ubiquitous Surveys Reveal Shallow Research Designs (Commentary).

    Science.gov (United States)

    McDaniel, Charles-Gene

    1990-01-01

    Criticizes the large amount of often irrelevant, poorly designed, and poorly written quantitative journalism research. Notes that journalism education and mass communication education research published in scholarly journals is largely ignored by professional journalists, who find more value in the qualitative research reported in the journalism…

  2. Design-Based Research: Is This a Suitable Methodology for Short-Term Projects?

    Science.gov (United States)

    Pool, Jessica; Laubscher, Dorothy

    2016-01-01

    This article reports on a design-based methodology of a thesis in which a fully face-to-face contact module was converted into a blended learning course. The purpose of the article is to report on how design-based phases, in the form of micro-, meso- and macro-cycles were applied to improve practice and to generate design principles. Design-based…

  3. A novel design methodology for waste heat recovery systems using organic Rankine cycle

    International Nuclear Information System (INIS)

    Budisulistyo, Denny; Krumdieck, Susan

    2017-01-01

    Highlights: • A design methodology is based on a new design to resource method. • The method aims to obtain the most cost-effective and the best resource utilization. • The methodology can be implemented to a new and existing plant for modifications. • The methodology is tested to a small scale experimental ORC plant. - Abstract: This paper discusses a comprehensive design methodology for optimization of organic Rankine cycle designs using a new design to resource method. The objective of the design to resource method is to obtain the best designs, which are the closest match to the resource and the most cost-effective. The design analysis is constrained by the available main components and heat resource. The ratio of net power output to the total heat exchanger area is used as the objective function. The new design methodology was implemented on an existing lab-scale as a case study. Experiments were conducted to obtain the data to identify the heat transfer coefficients of the real processes and validate the simulation model results. Design evaluations were carried out on the plant by using three Capstone gas turbine load conditions and four design alternatives. The results indicate that design 1 has the highest objective function of all the alternatives. It is able to increase the objective function from 100% to 391% of the base case depending on the Capstone gas turbine load conditions. The results also reveal that the current small scale plant is more suitable to Capstone gas turbine load condition 1 with the highest waste heat utilization rate of 76.9%.

  4. Operational amplifier speed and accuracy improvement analog circuit design with structural methodology

    CERN Document Server

    Ivanov, Vadim V

    2004-01-01

    Operational Amplifier Speed and Accuracy Improvement proposes a new methodology for the design of analog integrated circuits. The usefulness of this methodology is demonstrated through the design of an operational amplifier. This methodology consists of the following iterative steps: description of the circuit functionality at a high level of abstraction using signal flow graphs; equivalent transformations and modifications of the graph to the form where all important parameters are controlled by dedicated feedback loops; and implementation of the structure using a library of elementary cells. Operational Amplifier Speed and Accuracy Improvement shows how to choose structures and design circuits which improve an operational amplifier's important parameters such as speed to power ratio, open loop gain, common-mode voltage rejection ratio, and power supply rejection ratio. The same approach is used to design clamps and limiting circuits which improve the performance of the amplifier outside of its linear operat...

  5. Designing food supply chains- a structured methodology: a case on novel protein foods

    NARCIS (Netherlands)

    Apaiah, R.K.

    2006-01-01

    This thesis proposes and implements a structured methodology to aid in chain design and the evaluation and decision making processes that accompany it.It focusesonhow to design the entire chain from start to finish, so that the

  6. Developing organ-on-a-chip concepts using bio-mechatronic design methodology.

    Science.gov (United States)

    Christoffersson, Jonas; van Noort, Danny; Mandenius, Carl-Fredrik

    2017-05-26

    Mechatronic design is an engineering methodology for conceiving, configuring and optimising the design of a technical device or product to the needs and requirements of the final user. In this article, we show how the basic principles of this methodology can be exploited for in vitro cell cultures-often referred to as organ-on-a-chip devices. Due to the key role of the biological cells, we have introduced the term bio-mechatronic design, to highlight the complexity of designing a system that should integrate biology, mechanics and electronics in the same device structure. The strength of the mechatronic design is to match the needs of the potential users to a systematic evaluation of overall functional design alternative. It may be especially attractive for organs-on-chips where biological constituents such as cells and tissues in 3D settings and in a fluidic environment should be compared, screened and selected. Through this approach, design solutions ranked to customer needs are generated according to specified criteria, thereby defining the key constraints of the fabrication. As an example, the bio-mechatronic methodology is applied to a liver-on-a-chip based on information extrapolated from previous theoretical and experimental knowledge. It is concluded that the methodology can generate new fabrication solutions for devices, as well as efficient guidelines for refining the design and fabrication of many of today's organ-on-a-chip devices.

  7. The 2014 Survey on Living with Chronic Diseases in Canada on Mood and Anxiety Disorders: a methodological overview

    Directory of Open Access Journals (Sweden)

    S. O’Donnell

    2016-12-01

    Full Text Available Introduction: There is a paucity of information about the impact of mood and anxiety disorders on Canadians and the approaches used to manage them. To address this gap, the 2014 Survey on Living with Chronic Diseases in Canada–Mood and Anxiety Disorders Component (SLCDC-MA was developed. The purpose of this paper is to describe the methodology of the 2014 SLCDC-MA and examine the sociodemographic characteristics of the final sample. Methods: The 2014 SLCDC-MA is a cross-sectional follow-up survey that includes Canadians from the 10 provinces aged 18 years and older with mood and/or anxiety disorders diagnosed by a health professional that are expected to last, or have already lasted, six months or more. The survey was developed by the Public Health Agency of Canada (PHAC through an iterative, consultative process with Statistics Canada and external experts. Statistics Canada performed content testing, designed the sampling frame and strategies and collected and processed the data. PHAC used descriptive analyses to describe the respondents’ sociodemographic characteristics, produced nationally representative estimates using survey weights provided by Statistics Canada, and generated variance estimates using bootstrap methodology. Results: The final 2014 SLCDC-MA sample consists of a total of 3361 respondents (68.9% response rate. Among Canadian adults with mood and/or anxiety disorders, close to two-thirds (64% were female, over half (56% were married/in a common-law relationship and 60% obtained a post-secondary education. Most were young or middle-aged (85%, Canadian born (88%, of non-Aboriginal status (95%, and resided in an urban setting (82%. Household income was fairly evenly distributed between the adequacy quintiles; however, individuals were more likely to report a household income adequacy within the lowest (23% versus highest (17% quintile. Forty-five percent reported having a mood disorder only, 24% an anxiety disorder only and 31

  8. Advanced piloted aircraft flight control system design methodology. Volume 1: Knowledge base

    Science.gov (United States)

    Mcruer, Duane T.; Myers, Thomas T.

    1988-01-01

    The development of a comprehensive and electric methodology for conceptual and preliminary design of flight control systems is presented and illustrated. The methodology is focused on the design stages starting with the layout of system requirements and ending when some viable competing system architectures (feedback control structures) are defined. The approach is centered on the human pilot and the aircraft as both the sources of, and the keys to the solution of, many flight control problems. The methodology relies heavily on computational procedures which are highly interactive with the design engineer. To maximize effectiveness, these techniques, as selected and modified to be used together in the methodology, form a cadre of computational tools specifically tailored for integrated flight control system preliminary design purposes. While theory and associated computational means are an important aspect of the design methodology, the lore, knowledge and experience elements, which guide and govern applications are critical features. This material is presented as summary tables, outlines, recipes, empirical data, lists, etc., which encapsulate a great deal of expert knowledge. Much of this is presented in topical knowledge summaries which are attached as Supplements. The composite of the supplements and the main body elements constitutes a first cut at a a Mark 1 Knowledge Base for manned-aircraft flight control.

  9. Nonlinear Observer Design of the Generalized Rössler Hyperchaotic Systems via DIL Methodology

    Directory of Open Access Journals (Sweden)

    Yeong-Jeu Sun

    2012-01-01

    Full Text Available The generalized Rössler hyperchaotic systems are presented, and the state observation problem of such systems is investigated. Based on the differential inequality with Lyapunov methodology (DIL methodology, a nonlinear observer design for the generalized Rössler hyperchaotic systems is developed to guarantee the global exponential stability of the resulting error system. Meanwhile, the guaranteed exponential decay rate can be accurately estimated. Finally, numerical simulations are provided to illustrate the feasibility and effectiveness of proposed approach.

  10. Design methodology for bio-based processing: Biodiesel and fatty alcohol production

    DEFF Research Database (Denmark)

    Simasatikul, Lida; Arpornwichanop, Amornchai; Gani, Rafiqul

    2012-01-01

    A systematic design methodology is developed for producing two main products plus side products starting with one or more bio-based renewable source. A superstructure that includes all possible reaction and separation operations is generated through thermodynamic insights and available data. The ....... Economic analysis and net present value are determined to find the best economically and operationally feasible process. The application of the methodology is presented through a case study involving biodiesel and fatty alcohol productions....

  11. Design methodology for bio-based processing: Biodiesel and fatty alcohol production

    DEFF Research Database (Denmark)

    Simasatikul, Lida; Arpornwichanopa, Amornchai; Gani, Rafiqul

    2013-01-01

    A systematic design methodology is developed for producing multiple main products plus side products starting with one or more bio-based renewable source. A superstructure that includes all possible reaction and separation operations is generated through thermodynamic insights and available data........ Economic analysis and net present value are determined to find the best economically and operationally feasible process. The application of the methodology is presented through a case study involving biodiesel and fatty alcohol productions....

  12. Sample design for the residential energy consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    The purpose of this report is to provide detailed information about the multistage area-probability sample design used for the Residential Energy Consumption Survey (RECS). It is intended as a technical report, for use by statisticians, to better understand the theory and procedures followed in the creation of the RECS sample frame. For a more cursory overview of the RECS sample design, refer to the appendix entitled ``How the Survey was Conducted,`` which is included in the statistical reports produced for each RECS survey year.

  13. Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design.

    Science.gov (United States)

    Matha, Denis; Sandner, Frank; Molins, Climent; Campos, Alexis; Cheng, Po Wen

    2015-02-28

    The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provided, with a focus on their ability to accommodate the coupled dynamic behaviour of floating offshore wind systems. The exemplary design and testing methodology for a monolithic concrete spar platform as performed within the European KIC AFOSP project is presented. Results from the experimental tests compared to numerical simulations are presented and analysed and show very good agreement for relevant basic dynamic platform properties. Extreme and fatigue loads and cost analysis of the AFOSP system confirm the viability of the presented design process. In summary, the exemplary application of the reduced design and testing methodology for AFOSP confirms that it represents a viable procedure during pre-design of floating offshore wind turbine platforms. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  14. Development of residential-conservation-survey methodology for the US Air Force. Interim report. Task two

    Energy Technology Data Exchange (ETDEWEB)

    Abrams, D. W.; Hartman, T. L.; Lau, A. S.

    1981-11-13

    A US Air Force (USAF) Residential Energy Conservation Methodology was developed to compare USAF needs and available data to the procedures of the Residential Conservation Service (RCS) program as developed for general use by utility companies serving civilian customers. Attention was given to the data implications related to group housing, climatic data requirements, life-cycle cost analysis, energy saving modifications beyond those covered by RCS, and methods for utilizing existing energy consumption data in approaching the USAF survey program. Detailed information and summaries are given on the five subtasks of the program. Energy conservation alternatives are listed and the basic analysis techniques to be used in evaluating their thermal performane are described. (MCW)

  15. Delirium diagnosis methodology used in research: a survey-based study.

    Science.gov (United States)

    Neufeld, Karin J; Nelliot, Archana; Inouye, Sharon K; Ely, E Wesley; Bienvenu, O Joseph; Lee, Hochang Benjamin; Needham, Dale M

    2014-12-01

    To describe methodology used to diagnose delirium in research studies evaluating delirium detection tools. The authors used a survey to address reference rater methodology for delirium diagnosis, including rater characteristics, sources of patient information, and diagnostic process, completed via web or telephone interview according to respondent preference. Participants were authors of 39 studies included in three recent systematic reviews of delirium detection instruments in hospitalized patients. Authors from 85% (N = 33) of the 39 eligible studies responded to the survey. The median number of raters per study was 2.5 (interquartile range: 2-3); 79% were physicians. The raters' median duration of clinical experience with delirium diagnosis was 7 years (interquartile range: 4-10), with 5% having no prior clinical experience. Inter-rater reliability was evaluated in 70% of studies. Cognitive tests and delirium detection tools were used in the delirium reference rating process in 61% (N = 21) and 45% (N = 15) of studies, respectively, with 33% (N = 11) using both and 27% (N = 9) using neither. When patients were too drowsy or declined to participate in delirium evaluation, 70% of studies (N = 23) used all available information for delirium diagnosis, whereas 15% excluded such patients. Significant variability exists in reference standard methods for delirium diagnosis in published research. Increasing standardization by documenting inter-rater reliability, using standardized cognitive and delirium detection tools, incorporating diagnostic expert consensus panels, and using all available information in patients declining or unable to participate with formal testing may help advance delirium research by increasing consistency of case detection and improving generalizability of research results. Copyright © 2014 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

  16. Co-design of RAD and ETHICS methodologies: a combination of information system development methods

    Science.gov (United States)

    Nasehi, Arezo; Shahriyari, Salman

    2011-12-01

    Co-design is a new trend in the social world which tries to capture different ideas in order to use the most appropriate features for a system. In this paper, co-design of two information system methodologies is regarded; rapid application development (RAD) and effective technical and human implementation of computer-based systems (ETHICS). We tried to consider the characteristics of these methodologies to see the possibility of having a co-design or combination of them for developing an information system. To reach this purpose, four different aspects of them are analyzed: social or technical approach, user participation and user involvement, job satisfaction, and overcoming change resistance. Finally, a case study using the quantitative method is analyzed in order to examine the possibility of co-design using these factors. The paper concludes that RAD and ETHICS are appropriate to be co-designed and brings some suggestions for the co-design.

  17. Logic design for array-based circuits a structured design methodology

    CERN Document Server

    White, D E

    1992-01-01

    This book will show you how to approach the design covering everything from the circuit specification to the final design acceptance, including what support you can expect, sizing, timing analysis, power and packaging, various simulations, design verification, and design submission.

  18. Design and methodology of the Shanghai child and adolescent large-scale eye study (SCALE).

    Science.gov (United States)

    He, Xiangui; Zhao, Rong; Sankaridurg, Padmaja; Zhu, Jianfeng; Naduvilath, Thomas; Ma, Yingyan; Lu, Lina; Lv, Minzhi; Smith, Earl L; Resnikoff, Serge; Naidoo, Kovin; Zou, Haidong; Xu, Xun

    2017-09-12

    Nearly half of children suffering vision impairment reside in China with myopia accounting for the vast majority. To describe the design and methodology of the Shanghai Child and Adolescent Large-scale Eye Study (SCALE). The SCALE was a city wide, school-based, prospective survey. Children and adolescents aged 4-14 years from kindergarten (middle and senior), primary schools and junior high schools of all 17 districts and counties of the city of Shanghai, China were examined in 2012-2013. Each enrolled child underwent vision assessment (distance visual acuity; uncorrected and with corrective device if worn) and their parent/carer completed a questionnaire designed to elicit risk factors associated with myopia. Additionally, non-cycloplegic autorefraction and ocular axial length was measured in a subset of the larger sample. Prevalence and the associated factors of vision impairment, myopia and high myopia in Shanghai. In 2012-2013, a total of 910 245 of the eligible 1 196 763 children and adolescents identified from census (76%, mean age 9.0 ± 2.7 years [4-14 years]) were enrolled with visual acuity screened in the city of Shanghai. Of these, 610 952 children (67% of the entire sample) underwent non-cycloplegic autorefraction and 219 188 (24% of the entire sample) had both non-cycloplegic autorefraction and axial length measurements. The study results will provide insights on the burden of vision impairment, myopia and high myopia in children and adolescents in a metropolitan area of China, and contribute to the policies and strategies to address and limit the burden. © 2017 The Authors Clinical & Experimental Ophthalmology published by John Wiley & Sons Australia, Ltd on behalf of Royal Australian and New Zealand College of Ophthalmologists.

  19. Understanding pathways of exposure using site-specific habits surveys, particularly new pathways and methodologies

    International Nuclear Information System (INIS)

    Grzechnik, M.; McTaggart, K.; Clyne, F.

    2006-01-01

    Full text of publication follows: UK policy on the control of radiation exposure via routine discharges from nuclear licensed sites has long been based on ICRP recommendations that embody the principles of justification of practices, optimisation of protection, and dose limitation. Radiological protection of the public is based on the concept of a critical group of individuals. This group is defined as those people who, as a result of the area they reside and their habits, receive the highest radiation dose due to the operations of a site. Therefore, if the dose to this critical group is acceptable in relation to relevant dose limits and constraints, then other members of the public will receive lower doses. Thus, the principle of critical groups provides overall protection for the public. Surveys to determine local habits involve an integrated methodology, whereby the potential radioactive exposure pathways from liquid and gaseous discharges and direct radiation from the site are investigated. Surveys to identify these habits must be undertaken rigorously for consistency, and have been known to reveal unexpected pathways of radiation exposure. Pathways typically include consumption of local foodstuffs and external exposure. Furthermore, a number of critical groups ma y be identified within a single survey area if the habits of one group do not adequately describe those of the other inhabitants of the area. Survey preparation involves the initial identification of high producers and consumers of local foods in a geographically defined area surrounding the nuclear facility. Pathways can be broken down into three general groups, which include exposure arising from; 1) Terrestrial (gaseous) discharges surveyed within 5 km of the site 2) Direct radiation surveyed within 1 km of the site 3) Aquatic (liquid) discharges surveyed within local areas affected by the discharges, including seas, rivers and sewage works. The survey fieldwork involves interviewing members of the

  20. Application of project management methodology in design management of nuclear safety related structure

    International Nuclear Information System (INIS)

    Chen Mao

    2004-01-01

    This paper focuses on the application of project management methodology in the design management of Nuclear Safety Related Structure (NSRS), considering the design management features of its civil construction. Based on the experiences from the management of several projects, the project management triangle is proposed to be used in the management, to well treat the position of design interface in the project management. Some other management methods are also proposed

  1. Passive and semi-active heave compensator: Project design methodology and control strategies.

    Science.gov (United States)

    Cuellar Sanchez, William Humberto; Linhares, Tássio Melo; Neto, André Benine; Fortaleza, Eugênio Libório Feitosa

    2017-01-01

    Heave compensator is a system that mitigates transmission of heave movement from vessels to the equipment in the vessel. In drilling industry, a heave compensator enables drilling in offshore environments. Heave compensator attenuates movement transmitted from the vessel to the drill string and drill bit ensuring security and efficiency of the offshore drilling process. Common types of heave compensators are passive, active and semi-active compensators. This article presents 4 main points. First, a bulk modulus analysis obtains a simple condition to determine if the bulk modulus can be neglected in the design of hydropneumatic passive heave compensator. Second, the methodology to design passive heave compensators with the desired frequency response. Third, four control methodologies for semi-active heave compensator are tested and compared numerically. Lastly, we show experimental results obtained from a prototype with the methodology developed to design passive heave compensator.

  2. Nuclear reactor conceptual design: methodology for cost-effective internalisation of nuclear safety

    International Nuclear Information System (INIS)

    Gimenez, M.; Grinblat, P.; Schlamp, M.

    2002-01-01

    A novel and promising methodology to perform nuclear reactor design is presented in this work. It achieves to balance efficiently safety and economics at the conceptual engineering stage. The key to this integral approach is to take into account safety aspects in a design optimisation process where the design variables are balanced in order to obtain a better figure of merit related with reactor economic performance. Design parameter effects on characteristic or critical safety variables, chosen from reactor behaviour during accidents and from its probabilistic safety assessment -safety performance indicators-, are synthesised on Safety Design Maps. These maps allow one to compare these indicators with limit values, which are determined by design criteria or regulations, and to transfer these restrictions to the design parameters. In this way, reactor dynamic response and other safety aspects are integrated in a global optimisation process, by means of additional rules to the neutronic, thermal-hydraulic and mechanical calculations. This methodology turns out to be promising to balance and optimise reactor and safety system design in an early engineering stage, in order to internalise cost-efficiently safety issues. It also allows one to evaluate the incremental costs of implementing higher safety levels. Furthermore, through this methodology, a simplified design can be obtained, compared to the resultant complexity when these concepts are introduced in a later engineering stage. (author)

  3. Systematic screening methodology and energy efficient design of ionic liquid-based separation processes

    DEFF Research Database (Denmark)

    Kulajanpeng, Kusuma; Suriyapraphadilok, Uthaiporn; Gani, Rafiqul

    2016-01-01

    A systematic methodology for the screening of ionic liquids (ILs) as entrainers and for the design of ILs-based separation processes in various homogeneous binary azeotropic mixtures has been developed. The methodology focuses on the homogeneous binary aqueous azeotropic systems (for example, water...... based on a combination of criteria such as stability, toxicity, and their environmental impacts. All best ILs were used as entrainers, and an extractive distillation column (EDC) and ionic liquid recovery column were designed and simulated with a process simulator to determine the overall energy...

  4. A systematic methodology for the design of continuous active pharmaceutical ingredient production processes

    DEFF Research Database (Denmark)

    Cervera Padrell, Albert Emili; Gani, Rafiqul; Kiil, Søren

    2011-01-01

    Continuous pharmaceutical manufacturing (CPM) has emerged as a powerful technology to obtain higher reaction yields and improved separation efficiencies, potentially leading to simplified process flowsheets, reduced total costs, lower environmental impacts, and safer and more flexible production...... and representation, as well as on how to employ this knowledge for process (re-)design. The aim of this paper is to introduce a methodology that systematically identifies already existing PSE methods and tools which can assist in the design of CPM processes. This methodology has been applied to a process...... for the production of an API developed by H. Lundbeck A/S, demonstrating the mentioned potential benefits that CPM can offer....

  5. Demystifying Survey Research: Practical Suggestions for Effective Question Design

    Directory of Open Access Journals (Sweden)

    Deborah H. Charbonneau

    2007-12-01

    Full Text Available Objective ‐ Recent research has yielded several studies helpful for understanding the use of the survey technique in various library environments. Despite this, there has been limited discussion to guide library practitioners preparing survey questions. The aim of this article is to provide practical suggestions for effective questions when designing written surveys.Methods ‐ Advice and important considerations to help guide the process of developing survey questions are drawn from a review of the literature and personal experience.Results ‐ Basic techniques can be incorporated to improve survey questions, such as choosing appropriate question forms and incorporating the use of scales. Attention should be paid to the flow and ordering of the survey questions. Careful wording choices can also help construct clear, simple questions. Conclusion ‐ A well‐designed survey questionnaire can be a valuable source of data. By following some basic guidelines when constructing written survey questions, library and information professionals can have useful data collection instruments at their disposal.

  6. Development of an Expert Judgement Elicitation and Calibration Methodology for Risk Analysis in Conceptual Vehicle Design

    Science.gov (United States)

    Unal, Resit; Keating, Charles; Conway, Bruce; Chytka, Trina

    2004-01-01

    A comprehensive expert-judgment elicitation methodology to quantify input parameter uncertainty and analysis tool uncertainty in a conceptual launch vehicle design analysis has been developed. The ten-phase methodology seeks to obtain expert judgment opinion for quantifying uncertainties as a probability distribution so that multidisciplinary risk analysis studies can be performed. The calibration and aggregation techniques presented as part of the methodology are aimed at improving individual expert estimates, and provide an approach to aggregate multiple expert judgments into a single probability distribution. The purpose of this report is to document the methodology development and its validation through application to a reference aerospace vehicle. A detailed summary of the application exercise, including calibration and aggregation results is presented. A discussion of possible future steps in this research area is given.

  7. Design of batch operations: Systematic methodology for generation and analysis of sustainable alternatives

    DEFF Research Database (Denmark)

    Carvalho, Ana; Matos, Henrique A.; Gani, Rafiqul

    2010-01-01

    the operational, environmental, economical and safety related problems inherent in the process (batch or continuous). Alternatives that are more sustainable, compared to a reference, are generated and evaluated by addressing one or more of the identified problems. A decomposition technique as well as a set......The objective of this paper is to present a new methodology that is able to generate, screen and identify sustainable alternatives to continuous chemical processes as well as processes operating in the batch mode. The methodology generates the sustainable (design) alternatives by locating...... of batch indicators for batch operations has been developed and added to the methodology so that a wide range of processes that operate in continuous mode, in semi-continuous and/or in batch modes can be improved. The principal calculation steps of the methodology for applications to continuous and batch...

  8. Methodologies for evaluating long-term stabilization designs of uranium mill tailings impoundments

    International Nuclear Information System (INIS)

    Nelson, J.D.; Abt, S.R.; Volpe, R.L.; Van Zye, D.; Hinkle, N.E.; Staub, W.P.

    1986-06-01

    Uranium mill tailings impoundments require long-term (200 to 1000 years) stabilization. This report reviews currently available methodologies for evaluating factors that can have a significant influence on tailings stabilization and develops methodologies in technical areas where none presently exist. Mill operators can use these methodologies to assist with (1) the selection of sites for mill tailings impoundments, (2) the design of stable impoundments, and (3) the development of reclamation plans for existing impoundments. These methodologies would also be useful for regulatory agency evaluations of proposals in permit or license applications. Methodologies were reviewed or developed in the following technical areas: (1) prediction of the Probable Maximum Precipitation (PMP) and an accompanying Probable Maximum Flood (PMF); (2) prediction of the stability of local and regional fluvial systems; (3) design of impoundment surfaces resistant to gully erosion; (4) evaluation of the potential for surface sheet erosion; (5) design of riprap for protecting embankments from channel flood flow and overland flow; (6) selection of riprap with appropriate durability for its intended use; and (7) evaluation of oversizing required for marginal quality riprap

  9. Cell-based top-down design methodology for RSFQ digital circuits

    Science.gov (United States)

    Yoshikawa, N.; Koshiyama, J.; Motoori, K.; Matsuzaki, F.; Yoda, K.

    2001-08-01

    We propose a cell-based top-down design methodology for rapid single flux quantum (RSFQ) digital circuits. Our design methodology employs a binary decision diagram (BDD), which is currently used for the design of CMOS pass-transistor logic circuits. The main features of the BDD RSFQ circuits are the limited primitive number, dual rail nature, non-clocking architecture, and small gate count. We have made a standard BDD RSFQ cell library and prepared a top-down design CAD environment, by which we can perform logic synthesis, logic simulation, circuit simulation and layout view extraction. In order to clarify problems expected in large-scale RSFQ circuits design, we have designed a small RSFQ microprocessor based on simple architecture using our top-down design methodology. We have estimated its system performance and compared it with that of the CMOS microprocessor with the same architecture. It was found that the RSFQ system is superior in terms of the operating speed though it requires extremely large chip area.

  10. A multi-criteria decision aid methodology to design electric vehicles public charging networks

    Science.gov (United States)

    Raposo, João; Rodrigues, Ana; Silva, Carlos; Dentinho, Tomaz

    2015-05-01

    This article presents a new multi-criteria decision aid methodology, dynamic-PROMETHEE, here used to design electric vehicle charging networks. In applying this methodology to a Portuguese city, results suggest that it is effective in designing electric vehicle charging networks, generating time and policy based scenarios, considering offer and demand and the city's urban structure. Dynamic-PROMETHE adds to the already known PROMETHEE's characteristics other useful features, such as decision memory over time, versatility and adaptability. The case study, used here to present the dynamic-PROMETHEE, served as inspiration and base to create this new methodology. It can be used to model different problems and scenarios that may present similar requirement characteristics.

  11. Cyber-Informed Engineering: The Need for a New Risk Informed and Design Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Price, Joseph Daniel [Idaho National Laboratory; Anderson, Robert Stephen [Idaho National Laboratory

    2015-06-01

    Current engineering and risk management methodologies do not contain the foundational assumptions required to address the intelligent adversary’s capabilities in malevolent cyber attacks. Current methodologies focus on equipment failures or human error as initiating events for a hazard, while cyber attacks use the functionality of a trusted system to perform operations outside of the intended design and without the operator’s knowledge. These threats can by-pass or manipulate traditionally engineered safety barriers and present false information, invalidating the fundamental basis of a safety analysis. Cyber threats must be fundamentally analyzed from a completely new perspective where neither equipment nor human operation can be fully trusted. A new risk analysis and design methodology needs to be developed to address this rapidly evolving threatscape.

  12. Design Methodology of a Sensor Network Architecture Supporting Urgent Information and Its Evaluation

    Science.gov (United States)

    Kawai, Tetsuya; Wakamiya, Naoki; Murata, Masayuki

    Wireless sensor networks are expected to become an important social infrastructure which helps our life to be safe, secure, and comfortable. In this paper, we propose design methodology of an architecture for fast and reliable transmission of urgent information in wireless sensor networks. In this methodology, instead of establishing single complicated monolithic mechanism, several simple and fully-distributed control mechanisms which function in different spatial and temporal levels are incorporated on each node. These mechanisms work autonomously and independently responding to the surrounding situation. We also show an example of a network architecture designed following the methodology. We evaluated the performance of the architecture by extensive simulation and practical experiments and our claim was supported by the results of these experiments.

  13. Designing and conducting survey research a comprehensive guide

    CERN Document Server

    Rea, Louis M

    2014-01-01

    The industry standard guide, updated with new ideas and SPSS analysis techniques Designing and Conducting Survey Research: A Comprehensive Guide Fourth Edition is the industry standard resource that covers all major components of the survey process, updated to include new data analysis techniques and SPSS procedures with sample data sets online. The book offers practical, actionable guidance on constructing the instrument, administrating the process, and analyzing and reporting the results, providing extensive examples and worksheets that demonstrate the appropriate use of survey and data tech

  14. Cognitive Activity-based Design Methodology for Novice Visual Communication Designers

    Science.gov (United States)

    Kim, Hyunjung; Lee, Hyunju

    2016-01-01

    The notion of design thinking is becoming more concrete nowadays, as design researchers and practitioners study the thinking processes involved in design and employ the concept of design thinking to foster better solutions to complex and ill-defined problems. The goal of the present research is to develop a cognitive activity-based design…

  15. System-Level Design Methodologies for Networked Multiprocessor Systems-on-Chip

    DEFF Research Database (Denmark)

    Virk, Kashif Munir

    2008-01-01

    is the first such attempt in the published literature. The second part of the thesis deals with the issues related to the development of system-level design methodologies for networked multiprocessor systems-on-chip at various levels of design abstraction with special focus on the modeling and design...... at the system-level. The multiprocessor modeling framework is then extended to include models of networked multiprocessor systems-on-chip which is then employed to model wireless sensor networks both at the sensor node level as well as the wireless network level. In the third and the final part, the thesis...... to the transaction-level model. The thesis, as a whole makes contributions by describing a design methodology for networked multiprocessor embedded systems at three layers of abstraction from system-level through transaction-level to the cycle accurate level as well as demonstrating it practically by implementing...

  16. Methodology for Design and Analysis of Reactive Distillation Involving Multielement Systems

    DEFF Research Database (Denmark)

    Jantharasuk, Amnart; Gani, Rafiqul; Górak, Andrzej

    2011-01-01

    A new methodology for design and analysis of reactive distillation has been developed. In this work, the elementbased approach, coupled with a driving force diagram, has been extended and applied to the design of a reactive distillation column involving multielement (multicomponent) systems....... The transformation of ordinary systems to element-based ones and the aggregation of non-key elements allow the important design parameters, such as the number of stages, feed stage and minimum reflux ratio, to be determined by using simple diagrams similar to those regularly employed for non-reactive systems...... consisting of two components. Based on this methodology, an optimal design configuration is identified using the equivalent binary-element-driving force diagram. Two case studies of methyl acetate (MeOAc) synthesis and methyl-tert-butyl ether (MTBE) synthesis have been considered to demonstrate...

  17. Methodology for the Integration of Safety in the Optimization of the Advanced Reactors Design

    International Nuclear Information System (INIS)

    Grinblat, P.; Schlamp, M.; Brasnarof, D.; Gimenez, M.

    2003-01-01

    In this work a new methodology has been developed and implemented for taking into account the safety levels of the reactor in a design optimization process, by using Design Maps.They represent a new technique for comparing critical variables in case an accidental sequenced happened, with limit values set by the design criteria.So a good balance is achieved, without allowing the economic performance search to cause a too risky reactor, and guaranteeing the competitiveness of it in spite of the safety costs.Up to the moment, there is no design tool able to accomplish this task in an integrated way.A computational tool based on this methodology has been implemented.These tool specially programmed routines allow carrying out the mentioned tasks

  18. C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

    Science.gov (United States)

    Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

    2018-02-01

    The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

  19. A “Model to Model” Collaborative Perception Methodology for Distributed Design

    Directory of Open Access Journals (Sweden)

    Neng Wan

    2014-06-01

    Full Text Available To solve the problem of collaborative engineering changes of models distributed in heterogeneous design platforms, a “model to model” perception methodology is proposed in this paper. A self-management collaborative architecture is presented by peer to peer architecture and multiagent system. The network addresses correlation between heterogeneous platforms is built up by the perception router ontology. In the same way, the correlation between design models is described by the feature relation ontology. The design changes are encapsulated by the model modification ontology. Along with the ontology above, the design change search method is devised to catch the geometric changes; the influence search method is proposed to discover the influenced design feature and the design change adapting method is used to preserve the correlation coherence after perception. Through the work, the conventional design perception mode among designers has transformed into direct perception among models instead.

  20. Design methodology for fault-tolerant control of advanced driver assistance systems

    NARCIS (Netherlands)

    Gietelink, O.J.; Ploeg, J.; Schutter, B. de; Verhaegen, M.H.G.

    2003-01-01

    The objective of this project is to develop a methodology for the design, testing, evaluation and implementation of control systems for Advanced Driver Assistance Systems (ADAS). Examples of ADAS are collision avoidance systems, lane departure warning systems, pre-crash sensing, and adaptive cruise

  1. Vision-based methodology for collaborative management of qualitative criteria in design

    DEFF Research Database (Denmark)

    Tollestrup, Christian

    2006-01-01

    A Vision-based methodology is proposed as part of the management of qualitative criteria for design in early phases of the product development process for team based organisations. Focusing on abstract values and qualities for the product establishes a shared vision for the product amongst team m...

  2. A novel design methodology for low pass filter stage of a voltage ...

    Indian Academy of Sciences (India)

    Though the attenuation of high frequency components, offered by the higher order filters, has resulted in improved efficiency, the inherent instability of the higher order filter systemsrequires complex controls for proper functioning. Keeping this in mind, the paper describes the design methodology of a second order LC filter ...

  3. Preclosure seismic design methodology for a geologic repository at Yucca Mountain. Revision 1

    International Nuclear Information System (INIS)

    1996-08-01

    This topical report is the second in a series of three reports being developed by the US Department of Energy (DOE) to document the preclosure seismic design of structures, systems, and components (SSCs) that are important to the radiological safety of the potential repository at Yucca Mountain, Nevada. The first topical report, Methodology to Assess Fault Displacement and Vibratory Ground Motion Hazards at Yucca Mountain, YMP/TR-002-NP, was submitted to the US Nuclear Regulatory Commission (NRC) staff for review and comment in 1994 and has been accepted by the staff. The DOE plans to implement this methodology in fiscal year 1997 to develop probabilistic descriptions of the vibratory ground motion hazard and the fault displacement hazard at the Yucca Mountain site. The second topical report (this report) describes the DOE methodology and acceptance criteria for the preclosure seismic design of SSCs important to safety. A third report, scheduled for fiscal year 1998, will document the results of the probabilistic seismic hazard assessment (conducted using the methodology in the first topical report) and the development of the preclosure seismic design inputs. This third report will be submitted to NRC staff for review and comment as a third topical report or as a design study report

  4. Methodological Overview and Research Design for Adolescents in the Drug Abuse Treatment Outcome Studies.

    Science.gov (United States)

    Kristiansen, Patricia L.; Hubbard, Robert L.

    2001-01-01

    Gives an overview of methodology for adolescent component of the national Drug Abuse Treatment Outcome Studies; the sample of programs reflects treatment available to adolescents in six urban areas. Describes design, content, and quality of interview protocols. Discusses data collection procedures and completion rates for each phase of…

  5. QFD: a methodological tool for integration of ergonomics at the design stage.

    Science.gov (United States)

    Marsot, Jacques

    2005-03-01

    As a marked increase in the number of musculoskeletal disorders was noted in many industrialized countries and more specifically in companies that require the use of hand tools, the French National Research and Safety Institute launched in 1999 a research program on the topic of integrating ergonomics into hand tool design. After a brief review of the problems of integrating ergonomics at the design stage, the paper shows how the "Quality Function Deployment" method has been applied to the design of a boning knife and it highlights the difficulties encountered. Then, it demonstrates how this method can be a methodological tool geared to greater ergonomics consideration in product design.

  6. A low-power photovoltaic system with energy storage for radio communications: Description and design methodology

    Science.gov (United States)

    Chapman, C. P.; Chapman, P. D.; Lewison, A. H.

    1982-01-01

    A low power photovoltaic system was constructed with approximately 500 amp hours of battery energy storage to provide power to an emergency amateur radio communications center. The system can power the communications center for about 72 hours of continuous nonsun operation. Complete construction details and a design methodology algorithm are given with abundant engineering data and adequate theory to allow similar systems to be constructed, scaled up or down, with minimum design effort.

  7. Methodology for the optimal design of PEV charging systems with multiple chargers and distributed resources

    OpenAIRE

    Gunter, Samantha Joellyn; Perreault, David J.; Suresh, Sindhu; Afridi, Khurram

    2013-01-01

    Increased penetration of plug-in electric vehicles (PEVs) will necessitate deployment of numerous PEV chargers. Pairing these chargers with renewable distributed generation (DG) and storage can potentially alleviate negative impacts on the distribution grid and help meet renewable portfolio goals. The optimal design of such integrated charging systems depends on many factors, including geographic location and charging profiles. This paper presents an optimization methodology for designing int...

  8. Service Design: An Introduction to a Holistic Assessment Methodology of Library Services

    Directory of Open Access Journals (Sweden)

    Joe Marquez

    2015-01-01

    Full Text Available This paper explores service design as a relevant method for service assessment and creation in a library environment. Service design allows for a holistic and systemic look at the various systems that make a library function. This methodology is a co-creative process conducted with library staff and patrons. By working together, librarians and patrons can create more relevant services or refine current services to be more effective and efficient.

  9. A design and experimental verification methodology for an energy harvester skin structure

    Science.gov (United States)

    Lee, Soobum; Youn, Byeng D.

    2011-05-01

    This paper presents a design and experimental verification methodology for energy harvesting (EH) skin, which opens up a practical and compact piezoelectric energy harvesting concept. In the past, EH research has primarily focused on the design improvement of a cantilever-type EH device. However, such EH devices require additional space for proof mass and fixture and sometimes result in significant energy loss as the clamping condition becomes loose. Unlike the cantilever-type device, the proposed design is simply implemented by laminating a thin piezoelectric patch onto a vibrating structure. The design methodology proposed, which determines a highly efficient piezoelectric material distribution, is composed of two tasks: (i) topology optimization and (ii) shape optimization of the EH material. An outdoor condensing unit is chosen as a case study among many engineered systems with harmonic vibrating configuration. The proposed design methodology determined an optimal PZT material configuration on the outdoor unit skin structure. The designed EH skin was carefully prototyped to demonstrate that it can generate power up to 3.7 mW, which is sustainable for operating wireless sensor units for structural health monitoring and/or building automation.

  10. A design and experimental verification methodology for an energy harvester skin structure

    International Nuclear Information System (INIS)

    Lee, Soobum; Youn, Byeng D

    2011-01-01

    This paper presents a design and experimental verification methodology for energy harvesting (EH) skin, which opens up a practical and compact piezoelectric energy harvesting concept. In the past, EH research has primarily focused on the design improvement of a cantilever-type EH device. However, such EH devices require additional space for proof mass and fixture and sometimes result in significant energy loss as the clamping condition becomes loose. Unlike the cantilever-type device, the proposed design is simply implemented by laminating a thin piezoelectric patch onto a vibrating structure. The design methodology proposed, which determines a highly efficient piezoelectric material distribution, is composed of two tasks: (i) topology optimization and (ii) shape optimization of the EH material. An outdoor condensing unit is chosen as a case study among many engineered systems with harmonic vibrating configuration. The proposed design methodology determined an optimal PZT material configuration on the outdoor unit skin structure. The designed EH skin was carefully prototyped to demonstrate that it can generate power up to 3.7 mW, which is sustainable for operating wireless sensor units for structural health monitoring and/or building automation. (technical note)

  11. Methodology, Algorithms, and Emerging Tool for Automated Design of Intelligent Integrated Multi-Sensor Systems

    Directory of Open Access Journals (Sweden)

    Andreas König

    2009-11-01

    Full Text Available The emergence of novel sensing elements, computing nodes, wireless communication and integration technology provides unprecedented possibilities for the design and application of intelligent systems. Each new application system must be designed from scratch, employing sophisticated methods ranging from conventional signal processing to computational intelligence. Currently, a significant part of this overall algorithmic chain of the computational system model still has to be assembled manually by experienced designers in a time and labor consuming process. In this research work, this challenge is picked up and a methodology and algorithms for automated design of intelligent integrated and resource-aware multi-sensor systems employing multi-objective evolutionary computation are introduced. The proposed methodology tackles the challenge of rapid-prototyping of such systems under realization constraints and, additionally, includes features of system instance specific self-correction for sustained operation of a large volume and in a dynamically changing environment. The extension of these concepts to the reconfigurable hardware platform renders so called self-x sensor systems, which stands, e.g., for self-monitoring, -calibrating, -trimming, and -repairing/-healing systems. Selected experimental results prove the applicability and effectiveness of our proposed methodology and emerging tool. By our approach, competitive results were achieved with regard to classification accuracy, flexibility, and design speed under additional design constraints.

  12. Dark Energy Survey Year 1 Results: Multi-Probe Methodology and Simulated Likelihood Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Krause, E.; et al.

    2017-06-28

    We present the methodology for and detail the implementation of the Dark Energy Survey (DES) 3x2pt DES Year 1 (Y1) analysis, which combines configuration-space two-point statistics from three different cosmological probes: cosmic shear, galaxy-galaxy lensing, and galaxy clustering, using data from the first year of DES observations. We have developed two independent modeling pipelines and describe the code validation process. We derive expressions for analytical real-space multi-probe covariances, and describe their validation with numerical simulations. We stress-test the inference pipelines in simulated likelihood analyses that vary 6-7 cosmology parameters plus 20 nuisance parameters and precisely resemble the analysis to be presented in the DES 3x2pt analysis paper, using a variety of simulated input data vectors with varying assumptions. We find that any disagreement between pipelines leads to changes in assigned likelihood $\\Delta \\chi^2 \\le 0.045$ with respect to the statistical error of the DES Y1 data vector. We also find that angular binning and survey mask do not impact our analytic covariance at a significant level. We determine lower bounds on scales used for analysis of galaxy clustering (8 Mpc$~h^{-1}$) and galaxy-galaxy lensing (12 Mpc$~h^{-1}$) such that the impact of modeling uncertainties in the non-linear regime is well below statistical errors, and show that our analysis choices are robust against a variety of systematics. These tests demonstrate that we have a robust analysis pipeline that yields unbiased cosmological parameter inferences for the flagship 3x2pt DES Y1 analysis. We emphasize that the level of independent code development and subsequent code comparison as demonstrated in this paper is necessary to produce credible constraints from increasingly complex multi-probe analyses of current data.

  13. [Criteria for medical prioritisation: results from a regional survey and methodological reflections].

    Science.gov (United States)

    Stumpf, S; Hecker, S; Raspe, H

    2014-04-01

    less difference - but still some inconsistent results - in the participants' appraisal of potential decision-makers in health care. To our surprise, the logistic regression models including standard demographic and health-related variables account for only a small proportion of the variance of all dependent variables. Our discussion emphasises some difficulties and challenges of questionnaire surveys on prioritisation criteria - reflecting on the state of the German debate on prioritisation. There has been hardly any public discussion on this issue prior to our survey in autumn 2009. It is thus unlikely that people have been able to state well-informed preferences. Instead they seem to have followed some kind of "social reflexes" depending on the context and wording of each item. Subsequent studies on preferences and priorities should (i) more closely assess the understanding of each item in advance and (ii) adapt the aims of their study and its methodology to the actual stage of the public discourse on the topic in question. © Georg Thieme Verlag KG Stuttgart · New York.

  14. Adapt Design: A Methodology for Enabling Modular Design for Mission Specific SUAS

    Science.gov (United States)

    2016-08-24

    and reconfigurable system design with recent developments in the fields of automated manufacturing and micro-autonomous systems. A brief overview of...These mappings are the mechanism by which physical product designs are formulated. Finally, manufacture of the product variants is coordinated by...enable on-demand design based on automated manufacturing techniques using a common set of off-the-shelf components. As a result, all derived design

  15. Design of a Construction Safety Training System using Contextual Design Methodology

    OpenAIRE

    Baldev, Darshan H.

    2006-01-01

    In the U.S., the majority of construction companies are small companies with 10 or fewer employees (BLS, 2004). The fatality rate in the construction industry is high, indicating a need for implementing safety training to a greater extent. This research addresses two main goals: to make recommendations and design a safety training system for small construction companies, and to use Contextual Design to design the training system. Contextual Design was developed by Holtzblatt (Beyer and Holtzb...

  16. Developing a Design Methodology for Web 2.0 Mediated Learning

    DEFF Research Database (Denmark)

    Buus, Lillian; Georgsen, Marianne; Ryberg, Thomas

    2017-01-01

    of particular ?mediating design artefacts?. We discuss what can be viewed as a lack of attention paid to integrating the preferred teaching styles and learning philosophies of practitioners into design tools, and present a particular method for learning design; the COllaborative E-learning Design method (Co......Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning...... philosophy, and still trying to develop a design method or tool with a certain general applicability is discussed at the end of the paper. Experiences from a recent design workshop are described and discussed, with a focus on what specific steps have been taken in order to apply the method successfully...

  17. Developing a Design Methodology for Web 2.0 Mediated Learning

    DEFF Research Database (Denmark)

    Buus, Lillian; Georgsen, Marianne; Ryberg, Thomas

    2010-01-01

    of particular ‘mediating design artefacts’. We discuss what can be viewed as a lack of attention paid to integrating the preferred teaching styles and learning philosophies of practitioners into design tools, and present a particular method for learning design; the COllaborative E-learning Design method (Co......Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning...... philosophy, and still trying to develop a design method or tool with a certain general applicability is discussed at the end of the paper. Experiences from a recent design workshop are described and discussed, with a focus on what specific steps have been taken in order to apply the method successfully...

  18. Developing a Design Methodology for Web 2.0 Mediated Learning

    DEFF Research Database (Denmark)

    Buus, Lillian; Georgsen, Marianne; Ryberg, Thomas

    of particular ?mediating design artefacts?. We discuss what can be viewed as a lack of attention paid to integrating the preferred teaching styles and learning philosophies of practitioners into design tools, and present a particular method for learning design; the COllaborative E-learning Design method (Co......Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning...... philosophy, and still trying to develop a design method or tool with a certain general applicability is discussed at the end of the paper. Experiences from a recent design workshop are described and discussed, with a focus on what specific steps have been taken in order to apply the method successfully...

  19. Exploring cosmic origins with CORE: Survey requirements and mission design

    Science.gov (United States)

    Delabrouille, J.; de Bernardis, P.; Bouchet, F. R.; Achúcarro, A.; Ade, P. A. R.; Allison, R.; Arroja, F.; Artal, E.; Ashdown, M.; Baccigalupi, C.; Ballardini, M.; Banday, A. J.; Banerji, R.; Barbosa, D.; Bartlett, J.; Bartolo, N.; Basak, S.; Baselmans, J. J. A.; Basu, K.; Battistelli, E. S.; Battye, R.; Baumann, D.; Benoít, A.; Bersanelli, M.; Bideaud, A.; Biesiada, M.; Bilicki, M.; Bonaldi, A.; Bonato, M.; Borrill, J.; Boulanger, F.; Brinckmann, T.; Brown, M. L.; Bucher, M.; Burigana, C.; Buzzelli, A.; Cabass, G.; Cai, Z.-Y.; Calvo, M.; Caputo, A.; Carvalho, C.-S.; Casas, F. J.; Castellano, G.; Catalano, A.; Challinor, A.; Charles, I.; Chluba, J.; Clements, D. L.; Clesse, S.; Colafrancesco, S.; Colantoni, I.; Contreras, D.; Coppolecchia, A.; Crook, M.; D'Alessandro, G.; D'Amico, G.; da Silva, A.; de Avillez, M.; de Gasperis, G.; De Petris, M.; de Zotti, G.; Danese, L.; Désert, F.-X.; Desjacques, V.; Di Valentino, E.; Dickinson, C.; Diego, J. M.; Doyle, S.; Durrer, R.; Dvorkin, C.; Eriksen, H. K.; Errard, J.; Feeney, S.; Fernández-Cobos, R.; Finelli, F.; Forastieri, F.; Franceschet, C.; Fuskeland, U.; Galli, S.; Génova-Santos, R. T.; Gerbino, M.; Giusarma, E.; Gomez, A.; González-Nuevo, J.; Grandis, S.; Greenslade, J.; Goupy, J.; Hagstotz, S.; Hanany, S.; Handley, W.; Henrot-Versillé, S.; Hernández-Monteagudo, C.; Hervias-Caimapo, C.; Hills, M.; Hindmarsh, M.; Hivon, E.; Hoang, D. T.; Hooper, D. C.; Hu, B.; Keihänen, E.; Keskitalo, R.; Kiiveri, K.; Kisner, T.; Kitching, T.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lamagna, L.; Lapi, A.; Lasenby, A.; Lattanzi, M.; Le Brun, A. M. C.; Lesgourgues, J.; Liguori, M.; Lindholm, V.; Lizarraga, J.; Luzzi, G.; Macìas-P{érez, J. F.; Maffei, B.; Mandolesi, N.; Martin, S.; Martinez-Gonzalez, E.; Martins, C. J. A. P.; Masi, S.; Massardi, M.; Matarrese, S.; Mazzotta, P.; McCarthy, D.; Melchiorri, A.; Melin, J.-B.; Mennella, A.; Mohr, J.; Molinari, D.; Monfardini, A.; Montier, L.; Natoli, P.; Negrello, M.; Notari, A.; Noviello, F.; Oppizzi, F.; O'Sullivan, C.; Pagano, L.; Paiella, A.; Pajer, E.; Paoletti, D.; Paradiso, S.; Partridge, R. B.; Patanchon, G.; Patil, S. P.; Perdereau, O.; Piacentini, F.; Piat, M.; Pisano, G.; Polastri, L.; Polenta, G.; Pollo, A.; Ponthieu, N.; Poulin, V.; Prêle, D.; Quartin, M.; Ravenni, A.; Remazeilles, M.; Renzi, A.; Ringeval, C.; Roest, D.; Roman, M.; Roukema, B. F.; Rubiño-Martin, J.-A.; Salvati, L.; Scott, D.; Serjeant, S.; Signorelli, G.; Starobinsky, A. A.; Sunyaev, R.; Tan, C. Y.; Tartari, A.; Tasinato, G.; Toffolatti, L.; Tomasi, M.; Torrado, J.; Tramonte, D.; Trappe, N.; Triqueneaux, S.; Tristram, M.; Trombetti, T.; Tucci, M.; Tucker, C.; Urrestilla, J.; Väliviita, J.; Van de Weygaert, R.; Van Tent, B.; Vennin, V.; Verde, L.; Vermeulen, G.; Vielva, P.; Vittorio, N.; Voisin, F.; Wallis, C.; Wandelt, B.; Wehus, I. K.; Weller, J.; Young, K.; Zannoni, M.

    2018-04-01

    Future observations of cosmic microwave background (CMB) polarisation have the potential to answer some of the most fundamental questions of modern physics and cosmology, including: what physical process gave birth to the Universe we see today? What are the dark matter and dark energy that seem to constitute 95% of the energy density of the Universe? Do we need extensions to the standard model of particle physics and fundamental interactions? Is the ΛCDM cosmological scenario correct, or are we missing an essential piece of the puzzle? In this paper, we list the requirements for a future CMB polarisation survey addressing these scientific objectives, and discuss the design drivers of the COREmfive space mission proposed to ESA in answer to the "M5" call for a medium-sized mission. The rationale and options, and the methodologies used to assess the mission's performance, are of interest to other future CMB mission design studies. COREmfive has 19 frequency channels, distributed over a broad frequency range, spanning the 60–600 GHz interval, to control astrophysical foreground emission. The angular resolution ranges from 2' to 18', and the aggregate CMB sensitivity is about 2 μKṡarcmin. The observations are made with a single integrated focal-plane instrument, consisting of an array of 2100 cryogenically-cooled, linearly-polarised detectors at the focus of a 1.2-m aperture cross-Dragone telescope. The mission is designed to minimise all sources of systematic effects, which must be controlled so that no more than 10‑4 of the intensity leaks into polarisation maps, and no more than about 1% of E-type polarisation leaks into B-type modes. COREmfive observes the sky from a large Lissajous orbit around the Sun-Earth L2 point on an orbit that offers stable observing conditions and avoids contamination from sidelobe pick-up of stray radiation originating from the Sun, Earth, and Moon. The entire sky is observed repeatedly during four years of continuous scanning

  20. Assessing importance and satisfaction judgments of intermodal work commuters with electronic survey methodology.

    Science.gov (United States)

    2013-09-01

    Recent advances in multivariate methodology provide an opportunity to further the assessment of service offerings in public transportation for work commuting. We offer methodologies that are alternative to direct rating scale and have advantages in t...

  1. Technology, design and dementia: an exploratory survey of developers.

    Science.gov (United States)

    Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

    2017-08-01

    Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

  2. Systemic design methodologies for electrical energy systems analysis, synthesis and management

    CERN Document Server

    Roboam, Xavier

    2012-01-01

    This book proposes systemic design methodologies applied to electrical energy systems, in particular analysis and system management, modeling and sizing tools. It includes 8 chapters: after an introduction to the systemic approach (history, basics & fundamental issues, index terms) for designing energy systems, this book presents two different graphical formalisms especially dedicated to multidisciplinary devices modeling, synthesis and analysis: Bond Graph and COG/EMR. Other systemic analysis approaches for quality and stability of systems, as well as for safety and robustness analysis tools are also proposed. One chapter is dedicated to energy management and another is focused on Monte Carlo algorithms for electrical systems and networks sizing. The aim of this book is to summarize design methodologies based in particular on a systemic viewpoint, by considering the system as a whole. These methods and tools are proposed by the most important French research laboratories, which have many scientific partn...

  3. Aero-Mechanical Design Methodology for Subsonic Civil Transport High-Lift Systems

    Science.gov (United States)

    vanDam, C. P.; Shaw, S. G.; VanderKam, J. C.; Brodeur, R. R.; Rudolph, P. K. C.; Kinney, D.

    2000-01-01

    In today's highly competitive and economically driven commercial aviation market, the trend is to make aircraft systems simpler and to shorten their design cycle which reduces recurring, non-recurring and operating costs. One such system is the high-lift system. A methodology has been developed which merges aerodynamic data with kinematic analysis of the trailing-edge flap mechanism with minimum mechanism definition required. This methodology provides quick and accurate aerodynamic performance prediction for a given flap deployment mechanism early on in the high-lift system preliminary design stage. Sample analysis results for four different deployment mechanisms are presented as well as descriptions of the aerodynamic and mechanism data required for evaluation. Extensions to interactive design capabilities are also discussed.

  4. Design Methodology of a Dual-Halbach Array Linear Actuator with Thermal-Electromagnetic Coupling

    Science.gov (United States)

    Eckert, Paulo Roberto; Flores Filho, Aly Ferreira; Perondi, Eduardo; Ferri, Jeferson; Goltz, Evandro

    2016-01-01

    This paper proposes a design methodology for linear actuators, considering thermal and electromagnetic coupling with geometrical and temperature constraints, that maximizes force density and minimizes force ripple. The method allows defining an actuator for given specifications in a step-by-step way so that requirements are met and the temperature within the device is maintained under or equal to its maximum allowed for continuous operation. According to the proposed method, the electromagnetic and thermal models are built with quasi-static parametric finite element models. The methodology was successfully applied to the design of a linear cylindrical actuator with a dual quasi-Halbach array of permanent magnets and a moving-coil. The actuator can produce an axial force of 120 N and a stroke of 80 mm. The paper also presents a comparative analysis between results obtained considering only an electromagnetic model and the thermal-electromagnetic coupled model. This comparison shows that the final designs for both cases differ significantly, especially regarding its active volume and its electrical and magnetic loading. Although in this paper the methodology was employed to design a specific actuator, its structure can be used to design a wide range of linear devices if the parametric models are adjusted for each particular actuator. PMID:26978370

  5. Design Methodology of a Dual-Halbach Array Linear Actuator with Thermal-Electromagnetic Coupling

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Eckert

    2016-03-01

    Full Text Available This paper proposes a design methodology for linear actuators, considering thermal and electromagnetic coupling with geometrical and temperature constraints, that maximizes force density and minimizes force ripple. The method allows defining an actuator for given specifications in a step-by-step way so that requirements are met and the temperature within the device is maintained under or equal to its maximum allowed for continuous operation. According to the proposed method, the electromagnetic and thermal models are built with quasi-static parametric finite element models. The methodology was successfully applied to the design of a linear cylindrical actuator with a dual quasi-Halbach array of permanent magnets and a moving-coil. The actuator can produce an axial force of 120 N and a stroke of 80 mm. The paper also presents a comparative analysis between results obtained considering only an electromagnetic model and the thermal-electromagnetic coupled model. This comparison shows that the final designs for both cases differ significantly, especially regarding its active volume and its electrical and magnetic loading. Although in this paper the methodology was employed to design a specific actuator, its structure can be used to design a wide range of linear devices if the parametric models are adjusted for each particular actuator.

  6. Design Methodology of a Dual-Halbach Array Linear Actuator with Thermal-Electromagnetic Coupling.

    Science.gov (United States)

    Eckert, Paulo Roberto; Flores Filho, Aly Ferreira; Perondi, Eduardo; Ferri, Jeferson; Goltz, Evandro

    2016-03-11

    This paper proposes a design methodology for linear actuators, considering thermal and electromagnetic coupling with geometrical and temperature constraints, that maximizes force density and minimizes force ripple. The method allows defining an actuator for given specifications in a step-by-step way so that requirements are met and the temperature within the device is maintained under or equal to its maximum allowed for continuous operation. According to the proposed method, the electromagnetic and thermal models are built with quasi-static parametric finite element models. The methodology was successfully applied to the design of a linear cylindrical actuator with a dual quasi-Halbach array of permanent magnets and a moving-coil. The actuator can produce an axial force of 120 N and a stroke of 80 mm. The paper also presents a comparative analysis between results obtained considering only an electromagnetic model and the thermal-electromagnetic coupled model. This comparison shows that the final designs for both cases differ significantly, especially regarding its active volume and its electrical and magnetic loading. Although in this paper the methodology was employed to design a specific actuator, its structure can be used to design a wide range of linear devices if the parametric models are adjusted for each particular actuator.

  7. Alcohol- and Drug-Involved Driving in the United States: Methodology for the 2007 National Roadside Survey

    Science.gov (United States)

    Lacey, John H.; Kelley-Baker, Tara; Voas, Robert B.; Romano, Eduardo; Furr-Holden, C. Debra; Torres, Pedro; Berning, Amy

    2011-01-01

    This article describes the methodology used in the 2007 U.S. National Roadside Survey to estimate the prevalence of alcohol- and drug-impaired driving and alcohol- and drug-involved driving. This study involved randomly stopping drivers at 300 locations across the 48 continental U.S. states at sites selected through a stratified random sampling…

  8. Quality Control in Survey Design: Evaluating a Survey of Educators’ Attitudes Concerning Differentiated Compensation

    OpenAIRE

    Kelly D. Bradley; Michael Peabody; Shannon O. Sampson

    2015-01-01

    This study utilized the Rasch model to assess the quality of a survey instrument designed to measure attitudes of administrators and teachers concerning a differentiated teacher compensation program piloted in Kentucky.  Researchers addressing potentially contentious issues should ensure their methods stand up to rigorous criticism.  The results indicate that the rating scale does not function as expected, with items being too easy to endorse.  Future iterations of this survey should be revis...

  9. The methodology of population surveys of headache prevalence, burden and cost: Principles and recommendations from the Global Campaign against Headache

    Science.gov (United States)

    2014-01-01

    The global burden of headache is very large, but knowledge of it is far from complete and needs still to be gathered. Published population-based studies have used variable methodology, which has influenced findings and made comparisons difficult. Among the initiatives of the Global Campaign against Headache to improve and standardize methods in use for cross-sectional studies, the most important is the production of consensus-based methodological guidelines. This report describes the development of detailed principles and recommendations. For this purpose we brought together an expert consensus group to include experience and competence in headache epidemiology and/or epidemiology in general and drawn from all six WHO world regions. The recommendations presented are for anyone, of whatever background, with interests in designing, performing, understanding or assessing studies that measure or describe the burden of headache in populations. While aimed principally at researchers whose main interests are in the field of headache, they should also be useful, at least in parts, to those who are expert in public health or epidemiology and wish to extend their interest into the field of headache disorders. Most of all, these recommendations seek to encourage collaborations between specialists in headache disorders and epidemiologists. The focus is on migraine, tension-type headache and medication-overuse headache, but they are not intended to be exclusive to these. The burdens arising from secondary headaches are, in the majority of cases, more correctly attributed to the underlying disorders. Nevertheless, the principles outlined here are relevant for epidemiological studies on secondary headaches, provided that adequate definitions can be not only given but also applied in questionnaires or other survey instruments. PMID:24467862

  10. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Science.gov (United States)

    Hund, Lauren; Bedrick, Edward J; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes) depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  11. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Directory of Open Access Journals (Sweden)

    Lauren Hund

    Full Text Available Lot quality assurance sampling (LQAS surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  12. The Design and Validation of the Colorado Learning Attitudes about Science Survey

    Science.gov (United States)

    Adams, W. K.; Perkins, K. K.; Dubson, M.; Finkelstein, N. D.; Wieman, C. E.

    2005-09-01

    The Colorado Learning Attitudes about Science Survey (CLASS) is a new instrument designed to measure various facets of student attitudes and beliefs about learning physics. This instrument extends previous work by probing additional facets of student attitudes and beliefs. It has been written to be suitably worded for students in a variety of different courses. This paper introduces the CLASS and its design and validation studies, which include analyzing results from over 2400 students, interviews and factor analyses. Methodology used to determine categories and how to analyze the robustness of categories for probing various facets of student learning are also described. This paper serves as the foundation for the results and conclusions from the analysis of our survey data.

  13. A SUCCESSFUL BROADBAND SURVEY FOR GIANT Ly{alpha} NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

    Energy Technology Data Exchange (ETDEWEB)

    Prescott, Moire K. M. [Department of Physics, Broida Hall, Mail Code 9530, University of California, Santa Barbara, CA 93106 (United States); Dey, Arjun; Jannuzi, Buell T., E-mail: mkpresco@physics.ucsb.edu [National Optical Astronomy Observatory, 950 North Cherry Avenue, Tucson, AZ 85719 (United States)

    2012-04-01

    Giant Ly{alpha} nebulae (or Ly{alpha} 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Ly{alpha} nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Ly{alpha} nebulae at 2 {approx}< z {approx}< 3 within deep broadband imaging and have carried out a survey of the 9.4 deg{sup 2} NOAO Deep Wide-Field Survey Booetes field. With a total survey comoving volume of Almost-Equal-To 10{sup 8} h{sup -3}{sub 70} Mpc{sup 3}, this is the largest volume survey for Ly{alpha} nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Ly{alpha} nebula.

  14. Automated Methodologies for the Design of Flow Diagrams for Development and Maintenance Activities

    Science.gov (United States)

    Shivanand M., Handigund; Shweta, Bhat

    The Software Requirements Specification (SRS) of the organization is a text document prepared by strategic management incorporating the requirements of the organization. These requirements of ongoing business/ project development process involve the software tools, the hardware devices, the manual procedures, the application programs and the communication commands. These components are appropriately ordered for achieving the mission of the concerned process both in the project development and the ongoing business processes, in different flow diagrams viz. activity chart, workflow diagram, activity diagram, component diagram and deployment diagram. This paper proposes two generic, automatic methodologies for the design of various flow diagrams of (i) project development activities, (ii) ongoing business process. The methodologies also resolve the ensuing deadlocks in the flow diagrams and determine the critical paths for the activity chart. Though both methodologies are independent, each complements other in authenticating its correctness and completeness.

  15. Design methodology for flexible energy conversion systems accounting for dynamic performance

    DEFF Research Database (Denmark)

    Pierobon, Leonardo; Casati, Emiliano; Casella, Francesco

    2014-01-01

    This article presents a methodology to help in the definition of the optimal design of power generation systems. The innovative element is the integration of requirements on dynamic performance into the system design procedure. Operational flexibility is an increasingly important specification...... of power systems for base- and part-load operation. Thus, it is crucial to discard, in an early phase of the design process, plant configurations which feature unacceptable dynamic performance. The test case is the preliminary design of an off-grid power plant serving an off-shore platform where one...... of the three gas turbines is combined with an organic Rankine cycle turbogenerator to increase the overall energy efficiency. The core of the procedure is a stationary model, capable of performing the on-design thermodynamic cycle calculation, and the design of the components of the system. The results...

  16. Methodology for the Design of Streamline-Traced External-Compression Supersonic Inlets

    Science.gov (United States)

    Slater, John W.

    2014-01-01

    A design methodology based on streamline-tracing is discussed for the design of external-compression, supersonic inlets for flight below Mach 2.0. The methodology establishes a supersonic compression surface and capture cross-section by tracing streamlines through an axisymmetric Busemann flowfield. The compression system of shock and Mach waves is altered through modifications to the leading edge and shoulder of the compression surface. An external terminal shock is established to create subsonic flow which is diffused in the subsonic diffuser. The design methodology was implemented into the SUPIN inlet design tool. SUPIN uses specified design factors to design the inlets and computes the inlet performance, which includes the flow rates, total pressure recovery, and wave drag. A design study was conducted using SUPIN and the Wind-US computational fluid dynamics code to design and analyze the properties of two streamline-traced, external-compression (STEX) supersonic inlets for Mach 1.6 freestream conditions. The STEX inlets were compared to axisymmetric pitot, two-dimensional, and axisymmetric spike inlets. The STEX inlets had slightly lower total pressure recovery and higher levels of total pressure distortion than the axisymmetric spike inlet. The cowl wave drag coefficients of the STEX inlets were 20% of those for the axisymmetric spike inlet. The STEX inlets had external sound pressures that were 37% of those of the axisymmetric spike inlet, which may result in lower adverse sonic boom characteristics. The flexibility of the shape of the capture cross-section may result in benefits for the integration of STEX inlets with aircraft.

  17. Design for end of life : A design methodology for the early stages of an innovation process

    NARCIS (Netherlands)

    Peeters, J.R.; Dewulf, K.R.

    2012-01-01

    The first phases of the engineering design process, such as the problem definition, the information gathering and the idea generation phase, are commonly considered as important steps in product development, since the cost of a product is assumed to be largely determined within these design steps.

  18. Drift design methodology and preliminary application for the Yucca Mountain Site Characterization Project

    International Nuclear Information System (INIS)

    Hardy, M.P.; Bauer, S.J.

    1991-12-01

    Excavation stability in an underground nuclear waste repository is required during construction, emplacement, retrieval (if required), and closure phases to ensure worker health and safety, and to prevent development of potential pathways for radionuclide migration in the post-closure period. Stable excavations are developed by appropriate excavation procedures, design of the room shape, design and installation of rock support reinforcement systems, and implementation of appropriate monitoring and maintenance programs. In addition to the loads imposed by the in situ stress field, the repository drifts will be impacted by thermal loads developed after waste emplacement and, periodically, by seismic loads from naturally occurring earthquakes and underground nuclear events. A priori evaluation of stability is required for design of the ground support system, to confirm that the thermal loads are reasonable, and to support the license application process. In this report, a design methodology for assessing drift stability is presented. This is based on site conditions, together with empirical and analytical methods. Analytical numerical methods are emphasized at this time because empirical data are unavailable for excavations in welded tuff either at elevated temperatures or under seismic loads. The analytical methodology incorporates analysis of rock masses that are systematically jointed, randomly jointed, and sparsely jointed. In situ thermal and seismic loads are considered. Methods of evaluating the analytical results and estimating ground support requirements for all the full range of expected ground conditions are outlines. The results of a preliminary application of the methodology using the limited available data are presented. 26 figs., 55 tabs

  19. A knowledge management methodology for the integrated assessment of WWTP configurations during conceptual design.

    Science.gov (United States)

    Garrido-Baserba, M; Reif, R; Rodriguez-Roda, I; Poch, M

    2012-01-01

    The current complexity involved in wastewater management projects is arising as the XXI century sets new challenges leading towards a more integrated plant design. In this context, the growing number of innovative technologies, stricter legislation and the development of new methodological approaches make it difficult to design appropriate flow schemes for new wastewater projects. Thus, new tools are needed for the wastewater treatment plant (WWTP) conceptual design using integrated assessment methods in order to include different types of objectives at the same time i.e. environmental, economical, technical, and legal. Previous experiences used the decision support system (DSS) methodology to handle the specific issues related to wastewater management, for example, the design of treatment facilities for small communities. However, tools developed for addressing the whole treatment process independently of the plant size, capable of integrating knowledge from many different areas, including both conventional and innovative technologies are not available. Therefore, the aim of this paper is to present and describe an innovative knowledge-based methodology that handles the conceptual design of WWTP process flow-diagrams (PFDs), satisfying a vast number of different criteria. This global approach is based on a hierarchy of decisions that uses the information contained in knowledge bases (KBs) with the aim of automating the generation of suitable WWTP configurations for a specific scenario. Expert interviews, legislation, specialized literature and engineering experience have been integrated within the different KBs, which indeed constitute one of the main highlights of this work. Therefore, the methodology is presented as a valuable tool which provides customized PFD for each specific case, taking into account process unit interactions and the user specified requirements and objectives.

  20. An overall methodology for reliability prediction of mechatronic systems design with industrial application

    International Nuclear Information System (INIS)

    Habchi, Georges; Barthod, Christine

    2016-01-01

    We propose in this paper an overall ten-step methodology dedicated to the analysis and quantification of reliability during the design phase of a mechatronic system, considered as a complex system. The ten steps of the methodology are detailed according to the downward side of the V-development cycle usually used for the design of complex systems. Two main phases of analysis are complementary and cover the ten steps, qualitative analysis and quantitative analysis. The qualitative phase proposes to analyze the functional and dysfunctional behavior of the system and then determine its different failure modes and degradation states, based on external and internal functional analysis, organic and physical implementation, and dependencies between components, with consideration of customer specifications and mission profile. The quantitative phase is used to calculate the reliability of the system and its components, based on the qualitative behavior patterns, and considering data gathering and processing and reliability targets. Systemic approach is used to calculate the reliability of the system taking into account: the different technologies of a mechatronic system (mechanics, electronics, electrical .), dependencies and interactions between components and external influencing factors. To validate the methodology, the ten steps are applied to an industrial system, the smart actuator of Pack'Aero Company. - Highlights: • A ten-step methodology for reliability prediction of mechatronic systems design. • Qualitative and quantitative analysis for reliability evaluation using PN and RBD. • A dependency matrix proposal, based on the collateral and functional interactions. • Models consider mission profile, deterioration, interactions and influent factors. • Application and validation of the methodology on the “Smart Actuator” of PACK’AERO.

  1. A Alternative Analog Circuit Design Methodology Employing Integrated Artificial Intelligence Techniques

    Science.gov (United States)

    Tuttle, Jeffery L.

    In consideration of the computer processing power now available to the designer, an alternative analog circuit design methodology is proposed. Computer memory capacities no longer require the reduction of the transistor operational characteristics to an imprecise formulation. Therefore, it is proposed that transistor modelling be abandoned in favor of fully characterized transistor data libraries. Secondly, availability of the transistor libraries would facilitate an automated selection of the most appropriate device(s) for the circuit being designed. More specifically, a preprocessor computer program to a more sophisticated circuit simulator (e.g. SPICE) is developed to assist the designer in developing the basic circuit topology and the selection of the most appropriate transistor. Once this is achieved, the circuit topology and selected transistor data library would be downloaded to the simulator for full circuit operational characterization and subsequent design modifications. It is recognized that the design process is enhanced by the use of heuristics as applied to iterative design results. Accordingly, an artificial intelligence (AI) interface is developed to assist the designer in applying the preprocessor results. To demonstrate the retrofitability of the AI interface to established programs, the interface is specifically designed to be as non-intrusive to the host code as possible. Implementation of the proposed methodology offers the potential to speed the design process, since the preprocessor both minimizes the required number of simulator runs and provides a higher acceptance potential of the initial and subsequent simulator runs. Secondly, part count reductions may be realizable since the circuit topologies are not as strongly driven by transistor limitations. Thirdly, the predicted results should more closely match actual circuit operations since the inadequacies of the transistor models have been virtually eliminated. Finally, the AI interface

  2. Mobile Technology Use by People Experiencing Multiple Sclerosis Fatigue: Survey Methodology.

    Science.gov (United States)

    Van Kessel, Kirsten; Babbage, Duncan R; Reay, Nicholas; Miner-Williams, Warren M; Kersten, Paula

    2017-02-28

    Fatigue is one of the most commonly reported symptoms of multiple sclerosis (MS). It has a profound impact on all spheres of life, for people with MS and their relatives. It is one of the key precipitants of early retirement. Individual, group, and Internet cognitive behavioral therapy-based approaches to supporting people with MS to manage their fatigue have been shown to be effective. The aim of this project was to (1) survey the types of mobile devices and level of Internet access people with MS use or would consider using for a health intervention and (2) characterize the levels of fatigue severity and their impact experienced by the people in our sample to provide an estimate of fatigue severity of people with MS in New Zealand. The ultimate goal of this work was to support the future development of a mobile intervention for the management of fatigue for people with MS. Survey methodology using an online questionnaire was used to assess people with MS. A total of 51 people with MS participated. The average age was 48.5 years, and the large majority of the sample (77%) was female. Participants reported significant levels of fatigue as measured with the summary score of the Neurological Fatigue Index (mean 31.4 [SD 5.3]). Most (84%) respondents scored on average more than 3 on the fatigue severity questions, reflecting significant fatigue. Mobile phone usage was high with 86% of respondents reporting having a mobile phone; apps were used by 75% of respondents. Most participants (92%) accessed the Internet from home. New Zealand respondents with MS experienced high levels of both fatigue severity and fatigue impact. The majority of participants have a mobile device and access to the Internet. These findings, along with limited access to face-to-face cognitive behavioral therapy-based interventions, create an opportunity to develop a mobile technology platform for delivering a cognitive behavioral therapy-based intervention to decrease the severity and impact of

  3. Large Synoptic Survey Telescope: From Science Drivers To Reference Design

    Directory of Open Access Journals (Sweden)

    Ivezić, Ž.

    2008-06-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pach'{o}n in Northern Chile. The current baseline design, with an 8.4, m (6.5, m effective primary mirror, a 9.6 deg$^2$ field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg$^2$ with $delta<+34.5^circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\\% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg$^2$ region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10\\% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We

  4. Large Synoptic Survey Telescope: From science drivers to reference design

    Directory of Open Access Journals (Sweden)

    Ivezić Ž.

    2008-01-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next- generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective primary mirror, a 9.6 deg2 field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg2 with δ < +34.5◦ , and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep- wide-fast survey mode which will observe a 20,000 deg2 region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the LSST

  5. Large Synoptic Survey Telescope: From Science Drivers to Reference Design

    Energy Technology Data Exchange (ETDEWEB)

    Ivezic, Z.; Axelrod, T.; Brandt, W.N.; Burke, D.L.; Claver, C.F.; Connolly, A.; Cook, K.H.; Gee, P.; Gilmore, D.K.; Jacoby, S.H.; Jones, R.L.; Kahn, S.M.; Kantor, J.P.; Krabbendam, V.; Lupton, R.H.; Monet, D.G.; Pinto, P.A.; Saha, A.; Schalk, T.L.; Schneider, D.P.; Strauss, Michael A.; /Washington U., Seattle, Astron. Dept. /LSST Corp. /Penn State U., Astron. Astrophys. /KIPAC, Menlo Park /NOAO, Tucson /LLNL, Livermore /UC, Davis /Princeton U., Astrophys. Sci. Dept. /Naval Observ., Flagstaff /Arizona U., Astron. Dept. - Steward Observ. /UC, Santa Cruz /Harvard U. /Johns Hopkins U. /Illinois U., Urbana

    2011-10-14

    In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST). LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg{sup 2} field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg{sup 2} with {delta} < +34.5{sup o}, and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg{sup 2} region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the

  6. Methodology to determine the design and construction parameters of design of biogas installations for little farms

    International Nuclear Information System (INIS)

    1/2 Reparto Abel Santamaria, Boyeros telf (53-7) 45-3608, 45-1731, 451353, Fax: (53-7) 45-3608 , La Habana (Cuba))" data-affiliation=" (Instituto de Investigaciones de Ingeniería Agrícola, IAgric, Carretera Fontanar-Wajay, km 21/2 Reparto Abel Santamaria, Boyeros telf (53-7) 45-3608, 45-1731, 451353, Fax: (53-7) 45-3608 , La Habana (Cuba))" >Campos Cuní, Bernardo

    2011-01-01

    In Cuba the biogas installations are an important alternative for the processing of organic wastes in agricultural farms, and so reducing the contaminants and improving its quality as fertilizer, obtaining a renewable energy, the biogas. This combustible gas can be used for food cooking, water heating, the generation of electricity and domestic lighting. In the implementation of the strategy for facing climatic change drew up by the Ministry of Agriculture of Cuba it is considered a measure for the reduction of carbon emission consisting in “Reduce the consumption of combustibles of fossil origin using renewable sources of energy”. The paper shows a methodology for make easy the analysis and calculation of the parameters for the construction of fixed dome biodigesters. (author)

  7. A Platform-Based Methodology for System-Level Mixed-Signal Design

    Directory of Open Access Journals (Sweden)

    Alberto Sangiovanni-Vincentelli

    2010-01-01

    Full Text Available The complexity of today's embedded electronic systems as well as their demanding performance and reliability requirements are such that their design can no longer be tackled with ad hoc techniques while still meeting tight time to-market constraints. In this paper, we present a system level design approach for electronic circuits, utilizing the platform-based design (PBD paradigm as the natural framework for mixed-domain design formalization. In PBD, a meet-in-the-middle approach allows systematic exploration of the design space through a series of top-down mapping of system constraints onto component feasibility models in a platform library, which is based on bottom-up characterizations. In this framework, new designs can be assembled from the precharacterized library components, giving the highest priority to design reuse, correct assembly, and efficient design flow from specifications to implementation. We apply concepts from design centering to enforce robustness to modeling errors as well as process, voltage, and temperature variations, which are currently plaguing embedded system design in deep-submicron technologies. The effectiveness of our methodology is finally shown on the design of a pipeline A/D converter and two receiver front-ends for UMTS and UWB communications.

  8. Designing and Implementing INTREPID, an Intensive Program in Translational Research Methodologies for New Investigators

    Science.gov (United States)

    Aphinyanaphongs, Yindalon; Shao, Yongzhao; Micoli, Keith J.; Fang, Yixin; Goldberg, Judith D.; Galeano, Claudia R.; Stangel, Jessica H.; Chavis‐Keeling, Deborah; Hochman, Judith S.; Cronstein, Bruce N.; Pillinger, Michael H.

    2014-01-01

    Abstract Senior housestaff and junior faculty are often expected to perform clinical research, yet may not always have the requisite knowledge and skills to do so successfully. Formal degree programs provide such knowledge, but require a significant commitment of time and money. Short‐term training programs (days to weeks) provide alternative ways to accrue essential information and acquire fundamental methodological skills. Unfortunately, published information about short‐term programs is sparse. To encourage discussion and exchange of ideas regarding such programs, we here share our experience developing and implementing INtensive Training in Research Statistics, Ethics, and Protocol Informatics and Design (INTREPID), a 24‐day immersion training program in clinical research methodologies. Designing, planning, and offering INTREPID was feasible, and required significant faculty commitment, support personnel and infrastructure, as well as committed trainees. PMID:25066862

  9. Assessing the quantified impact of a hybrid POGIL methodology on student averages in a forensic science survey course

    Science.gov (United States)

    Meeks, Tyna L.

    A causal-comparative/quasi experimental study examined the effect of incorporating a hybrid teaching methodology that blended lecture with Process Oriented Guided Inquiry Lessons (POGILs) on the overall academic achievement of a diverse student body in a large lecture setting. Additional considerations included student gender, ethnicity, declared major (STEM or non-STEM), and SAT scores. An evaluation of the effect that these characteristics had on student achievement due to differentiating import placed on the use of POGILs as a learning tool was included. This study used data obtained from a longitudinal examination of eight years of student data from an introductory forensic science survey course offered in a R1 northeastern university. This study addressed the effectiveness of applying a proscribed active learning methodology, one proposed effective in collegiate education, to a new environment, forensic science. The methodology employed combined fourteen POGILs, created specifically for the chosen course, with didactic lecture during the entire semester of a forensic science survey course. This quasi-experimental design used the manipulation of the independent variable, the use of a hybrid lecture instead of exclusive use of traditional didactic lectures, on the students' academic achievement on exams given during the course. Participants in this study (N=1436) were undergraduate students enrolled in the single semester introductory science course. A longitudinal study that incorporated eight years of data was completed, 4 years pre-intervention (2007-2010) and 4 years post-intervention (2011-2014). The forensic science survey course, taught by only one professor during the eight-year period, was a science discipline that had yet to integrate an active learning educational model. Findings indicate four variables significantly contributed to explaining nearly 28% of the variation seen in the student class averages earned during the eight-year period: the

  10. A SUCCESSFUL BROADBAND SURVEY FOR GIANT Lyα NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

    International Nuclear Information System (INIS)

    Prescott, Moire K. M.; Dey, Arjun; Jannuzi, Buell T.

    2012-01-01

    Giant Lyα nebulae (or Lyα 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Lyα nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Lyα nebulae at 2 ∼ 2 NOAO Deep Wide-Field Survey Boötes field. With a total survey comoving volume of ≈10 8 h –3 70 Mpc 3 , this is the largest volume survey for Lyα nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Lyα nebula.

  11. A methodology for the geometric design of heat recovery steam generators applying genetic algorithms

    International Nuclear Information System (INIS)

    Durán, M. Dolores; Valdés, Manuel; Rovira, Antonio; Rincón, E.

    2013-01-01

    This paper shows how the geometric design of heat recovery steam generators (HRSG) can be achieved. The method calculates the product of the overall heat transfer coefficient (U) by the area of the heat exchange surface (A) as a function of certain thermodynamic design parameters of the HRSG. A genetic algorithm is then applied to determine the best set of geometric parameters which comply with the desired UA product and, at the same time, result in a small heat exchange area and low pressure losses in the HRSG. In order to test this method, the design was applied to the HRSG of an existing plant and the results obtained were compared with the real exchange area of the steam generator. The findings show that the methodology is sound and offers reliable results even for complex HRSG designs. -- Highlights: ► The paper shows a methodology for the geometric design of heat recovery steam generators. ► Calculates product of the overall heat transfer coefficient by heat exchange area as a function of certain HRSG thermodynamic design parameters. ► It is a complement for the thermoeconomic optimization method. ► Genetic algorithms are used for solving the optimization problem

  12. The IDEAL (Integrated Design and Engineering Analysis Languages) modeling methodology: Capabilities and Applications

    Science.gov (United States)

    Evers, Ken H.; Bachert, Robert F.

    1987-01-01

    The IDEAL (Integrated Design and Engineering Analysis Languages) modeling methodology has been formulated and applied over a five-year period. It has proven to be a unique, integrated approach utilizing a top-down, structured technique to define and document the system of interest; a knowledge engineering technique to collect and organize system descriptive information; a rapid prototyping technique to perform preliminary system performance analysis; and a sophisticated simulation technique to perform in-depth system performance analysis.

  13. Utility of Army Design Methodology in U.S. Coast Guard Counter Narcotic Interdiction Strategy

    Science.gov (United States)

    2017-06-09

    of the effectiveness of the current USCG strategy (approach) to maritime interdiction through personal experience, analysis of factual data , and an...UTILITY OF ARMY DESIGN METHODOLOGY IN U.S. COAST GUARD COUNTER NARCOTIC INTERDICTION STRATEGY A thesis presented to the... SCIENCE General Studies by JOHN B. MCWHITE, LIEUTENANT COMMANDER, U.S. COAST GUARD B.S., U.S. Coast Guard Academy, New London

  14. Methodology for optimal design of efficient air transport network in a competitive environment

    OpenAIRE

    Trapote Barreira, César

    2015-01-01

    This thesis aims to dissert about air transport network design taking into consideration the current needs about efficiency in a very competitive industry. The main focus for this work is the airline's point of view and for this reason is going to be common to talk about profitability. A methodology is proposed to analyse current networks and to introduce modifications. First, an analytical approach is proposed with the aim to understand better the interaction of key parameters in network ...

  15. Proposal of a calculation methodology for the preliminary design of a coalescing filter

    International Nuclear Information System (INIS)

    Gonzalez Dobrosky, Cintia

    2015-01-01

    Coalescing filters are described which are equipments for capture and recovery of mist most efficient, inexpensive and have fewer limitations of application. The operation, equations and ideal characteristics of filter media of these models are explained. A methodology for design and scale-up of this type of equipment for liquid recovery in gaseous currents is proposed from experimental tests, in order to guide the interested reader in its making. (author) [es

  16. Methodology for optimal energy system design of Zero Energy Buildings using mixed-integer linear programming

    OpenAIRE

    Lindberg, Karen Byskov; Doorman, Gerard L.; Fischer, David; Korpås, Magnus; Ånestad, Astrid; Sartori, Igor

    2016-01-01

    According to EU’s Energy Performance of Buildings Directive (EPBD), all new buildings shall be nearly Zero Energy Buildings (ZEB) from 2018/2020. How the ZEB requirement is defined has large implications for the choice of energy technology when considering both cost and environmental issues. This paper presents a methodology for determining ZEB buildings’ cost optimal energy system design seen from the building owner’s perspective. The added value of this work is the inclusion of peak load ta...

  17. Methodological Considerations in the Design of Large Scale Systems Engineering Processes.

    Science.gov (United States)

    1981-02-01

    Tversky, A., "Prospect Theory : An Analysis of Decision Under Risk", Econometrica, vol. 47, March 1979, pp. 263-291. Inhelder, B. and Piaget , J., The...concerned with the mathematical and behavioral theory of systems. This we will call systems science and operations research. Also, it says that we...will be con- cerned with a combination of these theories . We will denote the effort to obtain this combination systems methodology and design. Finally

  18. FINDING A METHOD FOR THE MADNESS: A COMPARATIVE ANALYSIS OF STRATEGIC DESIGN METHODOLOGIES

    Science.gov (United States)

    2017-06-01

    horizon because the longer time horizon incorporates more shocks and trends, creating a more depth in the specific vision and accounting for more security...strategic design methodologies which center around vision, time horizons and continuance, the methodology’s process, the methodology’s methods for...captures a similar sentiment in saying that grand strategy “take(s) into account of and apply the power of financial pressure, of diplomatic pressure

  19. A methodological approach for designing and sequencing product families in Reconfigurable Disassembly Systems

    Directory of Open Access Journals (Sweden)

    Ignacio Eguia

    2011-10-01

    Full Text Available Purpose: A Reconfigurable Disassembly System (RDS represents a new paradigm of automated disassembly system that uses reconfigurable manufacturing technology for fast adaptation to changes in the quantity and mix of products to disassemble. This paper deals with a methodology for designing and sequencing product families in RDS. Design/methodology/approach: The methodology is developed in a two-phase approach, where products are first grouped into families and then families are sequenced through the RDS, computing the required machines and modules configuration for each family. Products are grouped into families based on their common features using a Hierarchical Clustering Algorithm. The optimal sequence of the product families is calculated using a Mixed-Integer Linear Programming model minimizing reconfigurability and operational costs. Findings: This paper is focused to enable reconfigurable manufacturing technologies to attain some degree of adaptability during disassembly automation design using modular machine tools. Research limitations/implications: The MILP model proposed for the second phase is similar to the well-known Travelling Salesman Problem (TSP and therefore its complexity grows exponentially with the number of products to disassemble. In real-world problems, which a higher number of products, it may be advisable to solve the model approximately with heuristics. Practical implications: The importance of industrial recycling and remanufacturing is growing due to increasing environmental and economic pressures. Disassembly is an important part of remanufacturing systems for reuse and recycling purposes. Automatic disassembly techniques have a growing number of applications in the area of electronics, aerospace, construction and industrial equipment. In this paper, a design and scheduling approach is proposed to apply in this area. Originality/value: This paper presents a new concept called Reconfigurable Disassembly System

  20. The case-control design in veterinary sciences: A survey.

    Science.gov (United States)

    Cullen, Jonah N; Sargeant, Jan M; Makielski, Kelly M; O'Connor, Annette M

    2016-11-01

    The case-control study design is deceptively simple. However, many design considerations influence the estimated effect measure. An investigation of case-control studies in the human health literature suggested that some of these considerations are not described in reports of case-control studies. Our hypothesis was that the majority of veterinary studies labeled as case-controls would be incident density designs, and many would not interpret the effect measure obtained from those studies as the rate ratio rather than the odds ratio. Reference databases were searched for author-designated case-control studies. A survey of 100 randomly selected studies was conducted to examine the different design options described and estimated effect measures. Of the 100 author-identified case-control studies, 83 assessed an exposure-outcome association and, of those, only 54 (65.1%) sampled the study population based on an outcome and would thus be considered case-control designs. Twelve studies were incidence density designs but none used this terminology. Of the studies that reported an odds ratio as the effect measure, none reported on additional considerations that would have enabled a more interpretable result. This survey indicated many case-control-labeled studies were not case-control designs and among case-control studies, key design aspects were not often described. The absence of information about study design elements and underlying assumptions in case-control studies limits the ability to establish the effect measured by the study and the evidentiary value of the study might be underestimated. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. A Visual Analytics Based Decision Support Methodology For Evaluating Low Energy Building Design Alternatives

    Science.gov (United States)

    Dutta, Ranojoy

    The ability to design high performance buildings has acquired great importance in recent years due to numerous federal, societal and environmental initiatives. However, this endeavor is much more demanding in terms of designer expertise and time. It requires a whole new level of synergy between automated performance prediction with the human capabilities to perceive, evaluate and ultimately select a suitable solution. While performance prediction can be highly automated through the use of computers, performance evaluation cannot, unless it is with respect to a single criterion. The need to address multi-criteria requirements makes it more valuable for a designer to know the "latitude" or "degrees of freedom" he has in changing certain design variables while achieving preset criteria such as energy performance, life cycle cost, environmental impacts etc. This requirement can be met by a decision support framework based on near-optimal "satisficing" as opposed to purely optimal decision making techniques. Currently, such a comprehensive design framework is lacking, which is the basis for undertaking this research. The primary objective of this research is to facilitate a complementary relationship between designers and computers for Multi-Criterion Decision Making (MCDM) during high performance building design. It is based on the application of Monte Carlo approaches to create a database of solutions using deterministic whole building energy simulations, along with data mining methods to rank variable importance and reduce the multi-dimensionality of the problem. A novel interactive visualization approach is then proposed which uses regression based models to create dynamic interplays of how varying these important variables affect the multiple criteria, while providing a visual range or band of variation of the different design parameters. The MCDM process has been incorporated into an alternative methodology for high performance building design referred to as

  2. The Photogrammetric Survey Methodologies Applied to Low Cost 3d Virtual Exploration in Multidisciplinary Field

    Science.gov (United States)

    Palestini, C.; Basso, A.

    2017-11-01

    In recent years, an increase in international investment in hardware and software technology to support programs that adopt algorithms for photomodeling or data management from laser scanners significantly reduced the costs of operations in support of Augmented Reality and Virtual Reality, designed to generate real-time explorable digital environments integrated to virtual stereoscopic headset. The research analyzes transversal methodologies related to the acquisition of these technologies in order to intervene directly on the phenomenon of acquiring the current VR tools within a specific workflow, in light of any issues related to the intensive use of such devices , outlining a quick overview of the possible "virtual migration" phenomenon, assuming a possible integration with the new internet hyper-speed systems, capable of triggering a massive cyberspace colonization process that paradoxically would also affect the everyday life and more in general, on human space perception. The contribution aims at analyzing the application systems used for low cost 3d photogrammetry by means of a precise pipeline, clarifying how a 3d model is generated, automatically retopologized, textured by color painting or photo-cloning techniques, and optimized for parametric insertion on virtual exploration platforms. Workflow analysis will follow some case studies related to photomodeling, digital retopology and "virtual 3d transfer" of some small archaeological artifacts and an architectural compartment corresponding to the pronaus of Aurum, a building designed in the 1940s by Michelucci. All operations will be conducted on cheap or free licensed software that today offer almost the same performance as their paid counterparts, progressively improving in the data processing speed and management.

  3. Design methodology for the physical protection upgrade rule requirements for fixed sites. Technical report

    International Nuclear Information System (INIS)

    Evans, L.J. Jr.; Allen, T.

    1980-06-01

    This Design Methodology document aids the licensee in understanding how the fixed site requirements of the Physical Protection Upgrade Rule affect the design of physical protection systems for fuel processing plants, fuel manufacturing plants, or other fixed site special nuclear material operations involving possession or use of formula quantities of strategic special nuclear material. The document consists of three major elements: Logic Trees, Safeguards Jobs and Component Matrices, and Effectiveness Test Questionnaires. The work is based upon a previous study conducted by Sandia Laboratories for the Nuclear Regulatory Commission

  4. Mechanisms and coherences of robust design methodology: a robust design process proposal

    DEFF Research Database (Denmark)

    Göhler, Simon Moritz; Christensen, Martin Ebro; Howard, Thomas J.

    2016-01-01

    Although robust design (RD) methods are recognised as a way of developing mechanical products with consistent and predictable performance and quality, they do not experience widespread success in industry. One reason being the lack of a coherent RD process (RDP). In this contribution we analyse...

  5. Sustainable Chemical Processes and Products. New Design Methodology and Design Tools

    NARCIS (Netherlands)

    Korevaar, G.

    2004-01-01

    The current chemical industry is not sustainable, which leads to the fact that innovation of chemical processes and products is too often hazardous for society in general and the environment in particular. It really is a challenge to implement sustainability considerations in the design activities

  6. Preliminary Evaluation Methodology of ECCS Performance for Design Basis LOCA Redefinition

    International Nuclear Information System (INIS)

    Kang, Dong Gu; Ahn, Seung Hoon; Seul, Kwang Won

    2010-01-01

    To improve their existing regulations, the USNRC has made efforts to develop the risk-informed and performance-based regulation (RIPBR) approaches. As a part of these efforts, the rule revision of 10CFR50.46 (ECCS Acceptance Criteria) is underway, considering some options for 4 categories of spectrum of break sizes, ECCS functional reliability, ECCS evaluation model, and ECCS acceptance criteria. Since the potential for safety benefits and unnecessary burden reduction from design basis LOCA redefinition is high relative to other options, the USNRC is proceeding with the rulemaking for design basis LOCA redefinition. An instantaneous break with a flow rate equivalent to a double ended guillotine break (DEGB) of the largest primary piping system in the plant is widely recognized as an extremely unlikely event, while redefinition of design basis LOCA can affect the existing regulatory practices and approaches. In this study, the status of the design basis LOCA redefinition and OECD/NEA SMAP (Safety Margin Action Plan) methodology are introduced. Preliminary evaluation methodology of ECCS performance for LOCA is developed and discussed for design basis LOCA redefinition

  7. Review of Recent Methodological Developments in Group-Randomized Trials: Part 1-Design.

    Science.gov (United States)

    Turner, Elizabeth L; Li, Fan; Gallis, John A; Prague, Melanie; Murray, David M

    2017-06-01

    In 2004, Murray et al. reviewed methodological developments in the design and analysis of group-randomized trials (GRTs). We have highlighted the developments of the past 13 years in design with a companion article to focus on developments in analysis. As a pair, these articles update the 2004 review. We have discussed developments in the topics of the earlier review (e.g., clustering, matching, and individually randomized group-treatment trials) and in new topics, including constrained randomization and a range of randomized designs that are alternatives to the standard parallel-arm GRT. These include the stepped-wedge GRT, the pseudocluster randomized trial, and the network-randomized GRT, which, like the parallel-arm GRT, require clustering to be accounted for in both their design and analysis.

  8. A Model-Based Methodology for Integrated Design and Operation of Reactive Distillation Processes

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

    2015-01-01

    calculation of reactive bubble points. For an energy-efficient design, the driving-forc eapproach (to determine the optimal feed location) for a reactive system has been employed. For both thereactive McCabe-Thiele and driving force method, vapor-liquid equilibrium data are based on elements. Thereactive...... bubble point algorithm is used to compute the reactive vapor-liquid equilibrium data set.The operation of the RDC at the highest driving force and other candidate points is compared through openloop and closed-loop analysis. By application of this methodology it is shown that designing the process atthe...... maximum driving force results in an energy efficient and operable design. It is verified that the reactive distillation design option is less sensitive to the disturbances in the feed at the highest driving force and hasthe inherent ability to reject disturbances....

  9. A novel generalized design methodology and realization of Boolean operations using DNA.

    Science.gov (United States)

    Zoraida, B S E; Arock, Michael; Ronald, B S M; Ponalagusamy, R

    2009-09-01

    The biological deoxyribonucleic acid (DNA) strand has been increasingly seen as a promising computing unit. A new algorithm is formulated in this paper to design any DNA Boolean operator with molecular beacons (MBs) as its input. Boolean operators realized using the proposed design methodology is presented. The developed operators adopt a uniform representation for logical 0 and 1 for any Boolean operator. The Boolean operators designed in this work employ only a hybridization operation at each stage. Further, this paper for the first time brings out the realization of a binary adder and subtractor using molecular beacons. Simulation results of the DNA-based binary adder and subtractor are given to validate the design.

  10. Methodology for designing and manufacturing complex biologically inspired soft robotic fluidic actuators: prosthetic hand case study.

    Science.gov (United States)

    Thompson-Bean, E; Das, R; McDaid, A

    2016-10-31

    We present a novel methodology for the design and manufacture of complex biologically inspired soft robotic fluidic actuators. The methodology is applied to the design and manufacture of a prosthetic for the hand. Real human hands are scanned to produce a 3D model of a finger, and pneumatic networks are implemented within it to produce a biomimetic bending motion. The finger is then partitioned into material sections, and a genetic algorithm based optimization, using finite element analysis, is employed to discover the optimal material for each section. This is based on two biomimetic performance criteria. Two sets of optimizations using two material sets are performed. Promising optimized material arrangements are fabricated using two techniques to validate the optimization routine, and the fabricated and simulated results are compared. We find that the optimization is successful in producing biomimetic soft robotic fingers and that fabrication of the fingers is possible. Limitations and paths for development are discussed. This methodology can be applied for other fluidic soft robotic devices.

  11. A methodology for the design of experiments in computational intelligence with multiple regression models.

    Science.gov (United States)

    Fernandez-Lozano, Carlos; Gestal, Marcos; Munteanu, Cristian R; Dorado, Julian; Pazos, Alejandro

    2016-01-01

    The design of experiments and the validation of the results achieved with them are vital in any research study. This paper focuses on the use of different Machine Learning approaches for regression tasks in the field of Computational Intelligence and especially on a correct comparison between the different results provided for different methods, as those techniques are complex systems that require further study to be fully understood. A methodology commonly accepted in Computational intelligence is implemented in an R package called RRegrs. This package includes ten simple and complex regression models to carry out predictive modeling using Machine Learning and well-known regression algorithms. The framework for experimental design presented herein is evaluated and validated against RRegrs. Our results are different for three out of five state-of-the-art simple datasets and it can be stated that the selection of the best model according to our proposal is statistically significant and relevant. It is of relevance to use a statistical approach to indicate whether the differences are statistically significant using this kind of algorithms. Furthermore, our results with three real complex datasets report different best models than with the previously published methodology. Our final goal is to provide a complete methodology for the use of different steps in order to compare the results obtained in Computational Intelligence problems, as well as from other fields, such as for bioinformatics, cheminformatics, etc., given that our proposal is open and modifiable.

  12. A methodology to derive Synthetic Design Hydrographs for river flood management

    Science.gov (United States)

    Tomirotti, Massimo; Mignosa, Paolo

    2017-12-01

    The design of flood protection measures requires in many cases not only the estimation of the peak discharges, but also of the volume of the floods and its time distribution. A typical solution to this kind of problems is the formulation of Synthetic Design Hydrographs (SDHs). In this paper a methodology to derive SDHs is proposed on the basis of the estimation of the Flow Duration Frequency (FDF) reduction curve and of a Peak-Duration (PD) relationship furnishing respectively the quantiles of the maximum average discharge and the average peak position in each duration. The methodology is intended to synthesize the main features of the historical floods in a unique SDH for each return period. The shape of the SDH is not selected a priori but is a result of the behaviour of FDF and PD curves, allowing to account in a very convenient way for the variability of the shapes of the observed hydrographs at local time scale. The validation of the methodology is performed with reference to flood routing problems in reservoirs, lakes and rivers. The results obtained demonstrate the capability of the SDHs to describe the effects of different hydraulic systems on the statistical regime of floods, even in presence of strong modifications induced on the probability distribution of peak flows.

  13. A methodology for the design of experiments in computational intelligence with multiple regression models

    Directory of Open Access Journals (Sweden)

    Carlos Fernandez-Lozano

    2016-12-01

    Full Text Available The design of experiments and the validation of the results achieved with them are vital in any research study. This paper focuses on the use of different Machine Learning approaches for regression tasks in the field of Computational Intelligence and especially on a correct comparison between the different results provided for different methods, as those techniques are complex systems that require further study to be fully understood. A methodology commonly accepted in Computational intelligence is implemented in an R package called RRegrs. This package includes ten simple and complex regression models to carry out predictive modeling using Machine Learning and well-known regression algorithms. The framework for experimental design presented herein is evaluated and validated against RRegrs. Our results are different for three out of five state-of-the-art simple datasets and it can be stated that the selection of the best model according to our proposal is statistically significant and relevant. It is of relevance to use a statistical approach to indicate whether the differences are statistically significant using this kind of algorithms. Furthermore, our results with three real complex datasets report different best models than with the previously published methodology. Our final goal is to provide a complete methodology for the use of different steps in order to compare the results obtained in Computational Intelligence problems, as well as from other fields, such as for bioinformatics, cheminformatics, etc., given that our proposal is open and modifiable.

  14. Can citizen science produce good science? Testing the OPAL Air Survey methodology, using lichens as indicators of nitrogenous pollution.

    Science.gov (United States)

    Tregidgo, Daniel J; West, Sarah E; Ashmore, Mike R

    2013-11-01

    Citizen science is having increasing influence on environmental monitoring as its advantages are becoming recognised. However methodologies are often simplified to make them accessible to citizen scientists. We tested whether a recent citizen science survey (the OPAL Air Survey) could detect trends in lichen community composition over transects away from roads. We hypothesised that the abundance of nitrophilic lichens would decrease with distance from the road, while that of nitrophobic lichens would increase. The hypothesised changes were detected along strong pollution gradients, but not where the road source was relatively weak, or background pollution relatively high. We conclude that the simplified OPAL methodology can detect large contrasts in nitrogenous pollution, but it may not be able to detect more subtle changes in pollution exposure. Similar studies are needed in conjunction with the ever-growing body of citizen science work to ensure that the limitations of these methods are fully understood. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Applying a learning design methodology in the flipped classroom approach – empowering teachers to reflect and design for learning

    Directory of Open Access Journals (Sweden)

    Evangelia Triantafyllou

    2016-05-01

    Full Text Available One of the recent developments in teaching that heavily relies on current technology is the “flipped classroom” approach. In a flipped classroom the traditional lecture and homework sessions are inverted. Students are provided with online material in order to gain necessary knowledge before class, while class time is devoted to clarifications and application of this knowledge. The hypothesis is that there could be deep and creative discussions when teacher and students physically meet. This paper discusses how the learning design methodology can be applied to represent, share and guide educators through flipped classroom designs. In order to discuss the opportunities arising by this approach, the different components of the Learning Design – Conceptual Map (LD-CM are presented and examined in the context of the flipped classroom. It is shown that viewing the flipped classroom through the lens of learning design can promote the use of theories and methods to evaluate its effect on the achievement of learning objectives, and that it may draw attention to the employment of methods to gather learner responses. Moreover, a learning design approach can enforce the detailed description of activities, tools and resources used in specific flipped classroom models, and it can make educators more aware of the decisions that have to be taken and people who have to be involved when designing a flipped classroom. By using the LD-CM, this paper also draws attention to the importance of characteristics and values of different stakeholders (i.e. institutions, educators, learners, and external agents, which influence the design and success of flipped classrooms. Moreover, it looks at the teaching cycle from a flipped instruction model perspective and adjusts it to cater for the reflection loops educators are involved when designing, implementing and re-designing a flipped classroom. Finally, it highlights the effect of learning design on the guidance

  16. Design Methodology of Camshaft Driven Charge Valves for Pneumatic Engine Starts

    Directory of Open Access Journals (Sweden)

    Moser Michael M.

    2015-01-01

    Full Text Available Idling losses constitute a significant amount of the fuel consumption of internal combustion engines. Therefore, shutting down the engine during idling phases can improve its overall efficiency. For driver acceptance a fast restart of the engine must be guaranteed. A fast engine start can be performed using a powerful electric starter and an appropriate battery which are found in hybrid electric vehicles, for example. However, these devices involve additional cost and weight. An alternative method is to use a tank with pressurized air that can be injected directly into the cylinders to start the engine pneumatically. In this paper, pneumatic engine starts using camshaft driven charge valves are discussed. A general methodology for an air-optimal charge valve design is presented which can deal with various requirements. The proposed design methodology is based on a process model representing pneumatic engine operation. A design example for a two-cylinder engine is shown, and the resulting optimized pneumatic start is experimentally verified on a test bench engine. The engine’s idling speed of 1200 rpm can be reached within 350 ms for an initial pressure in the air tank of 10 bar. A detailed system analysis highlights the characteristics of the optimal design found.

  17. Creating Innovative Research Designs: The 10-Year Methodological Think Tank Case Study

    Science.gov (United States)

    Katerndahl, David; Crabtree, Benjamin

    2006-01-01

    PURPOSE Addressing important but complex research questions often necessitates the creation of innovative mixed methods designs. This report describes an approach to developing research designs for studying important but methodologically challenging research questions. METHODS The Methodological Think Tank has been held annually in conjunction with the Primary Care Research Methods and Statistics Conference in San Antonio since 1994. A group of 3 to 4 methodologists with expertise balanced between quantitative and qualitative backgrounds is invited by the think tank coordinators to serve on a 2-day think tank to discuss a research question selected from those submitted in response to a call for proposals. During the first half-day, these experts explore the content area with the investigator, often challenging beliefs and assumptions. During the second half-day, the think tank participants systematically prune potential approaches until a desirable research method is identified. RESULTS To date, the most recent 7 think tanks have produced fundable research designs, with 1 being funded by a K award and 4 by R01 grants. All participating investigators attributed much of their success to think tank participation. Lessons learned include (1) the importance of careful selection of participating methodologists, (2) all think tank communities of inquiry must go through 4 stages of development from pseudocommunity to community, and (3) the critical importance of listening by the investigator. CONCLUSION Researchers and academic departments could use this process locally to develop innovative research designs. PMID:17003146

  18. Equilibrium Design Based on Design Thinking Solving: An Integrated Multicriteria Decision-Making Methodology

    Directory of Open Access Journals (Sweden)

    Yi-Xiong Feng

    2013-01-01

    Full Text Available A multicriteria decision-making model was proposed in order to acquire the optimum one among different product design schemes. VIKOR method was introduced to compute the ranking value of each scheme. A multiobjective optimization model for criteria weight was established. In this model, projection pursuit method was employed to identify a criteria weight set which could keep classification information of original schemes to the greatest extent, while PROMETHEE II was adopted to keep sorting information. Dominance based multiobjective simulated annealing algorithm (D-MOSA was introduced to solve the optimization model. Finally, an example was taken to demonstrate the feasibility and efficiency of this model.

  19. Three-dimensional design methodologies for tree-based FPGA architecture

    CERN Document Server

    Pangracious, Vinod; Mehrez, Habib

    2015-01-01

    This book focuses on the development of 3D design and implementation methodologies for Tree-based FPGA architecture. It also stresses the needs for new and augmented 3D CAD tools to support designs such as, the design for 3D, to manufacture high performance 3D integrated circuits and reconfigurable FPGA-based systems. This book was written as a text that covers the foundations of 3D integrated system design and FPGA architecture design. It was written for the use in an elective or core course at the graduate level in field of Electrical Engineering, Computer Engineering and Doctoral Research programs. No previous background on 3D integration is required, nevertheless fundamental understanding of 2D CMOS VLSI design is required. It is assumed that reader has taken the core curriculum in Electrical Engineering or Computer Engineering, with courses like CMOS VLSI design, Digital System Design and Microelectronics Circuits being the most important. It is accessible for self-study by both senior students and profe...

  20. Improvement of the Assignment Methodology of the Approach Embankment Design to Highway Structures in Difficult Conditions

    Science.gov (United States)

    Chistyy, Y.; Kuzakhmetova, E.; Fazilova, Z.; Tsukanova, O.

    2018-03-01

    Design issues of junction of bridges and overhead road with approach embankment are studied. The reasons for the formation of deformations in the road structure are indicated. Activities to ensure sustainability and acceleration of the shrinkage of a weak subgrade approach embankment are listed. The necessity of taking into account the man-made impact of the approach embankment on the subgrade behavior is proved. Modern stabilizing agents to improve the properties of used soils in the embankment and the subgrade are suggested. Clarified methodology for determining an active zone of compression in the subgrade under load from the weight of the embankment is described. As an additional condition to the existing methodology for establishing the lower bound of the active zone of compression it is offered to accept the accuracy of evaluation of soil compressibility and determine shrinkage.

  1. Behavioral issues in operations management new trends in design, management, and methodologies

    CERN Document Server

    2013-01-01

    Behavioral Operations Management  has been identified in the last years as one of the most promising emerging fields in Operations Management. Behavioral Issues in Operations Management  explains and examines up-to-date research in this field, which works to analyze the impact of human behavior on the management of complex operating systems.   A collection of studies from leading scholars presents different methodologies and approaches, supported by real data and case studies. Issues such as building trust and strong cooperative relationships with suppliers, enhancing motivation and designing proper incentives for stimulating more effective decision maker behaviours are considered. The main decision-making processes affected by behavioral issues are also analyzed with a focus on new product development, logistics, and supply chain integration.   The broad coverage of methodologies and practical implications makes Behavioral Issues in Operations Management an ideal reference for both researchers developing...

  2. Methodology for risk assessment and reliability applied for pipeline engineering design and industrial valves operation

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Dierci [Universidade Federal Fluminense (UFF), Volta Redonda, RJ (Brazil). Escola de Engenharia Industrial e Metalurgia. Lab. de Sistemas de Producao e Petroleo e Gas], e-mail: dsilveira@metal.eeimvr.uff.br; Batista, Fabiano [CICERO, Rio das Ostras, RJ (Brazil)

    2009-07-01

    Two kinds of situations may be distinguished for estimating the operating reliability when maneuvering industrial valves and the probability of undesired events in pipelines and industrial plants: situations in which the risk is identified in repetitive cycles of operations and situations in which there is a permanent hazard due to project configurations introduced by decisions during the engineering design definition stage. The estimation of reliability based on the influence of design options requires the choice of a numerical index, which may include a composite of human operating parameters based on biomechanics and ergonomics data. We first consider the design conditions under which the plant or pipeline operator reliability concepts can be applied when operating industrial valves, and then describe in details the ergonomics and biomechanics risks that would lend itself to engineering design database development and human reliability modeling and assessment. This engineering design database development and reliability modeling is based on a group of engineering design and biomechanics parameters likely to lead to over-exertion forces and working postures, which are themselves associated with the functioning of a particular plant or pipeline. This approach to construct based on ergonomics and biomechanics for a more common industrial valve positioning in the plant layout is proposed through the development of a methodology to assess physical efforts and operator reach, combining various elementary operations situations. These procedures can be combined with the genetic algorithm modeling and four elements of the man-machine systems: the individual, the task, the machinery and the environment. The proposed methodology should be viewed not as competing to traditional reliability and risk assessment bur rather as complementary, since it provides parameters related to physical efforts values for valves operation and workspace design and usability. (author)

  3. Can citizen science produce good science? Testing the OPAL Air Survey methodology, using lichens as indicators of nitrogenous pollution

    International Nuclear Information System (INIS)

    Tregidgo, Daniel J.; West, Sarah E.; Ashmore, Mike R.

    2013-01-01

    Citizen science is having increasing influence on environmental monitoring as its advantages are becoming recognised. However methodologies are often simplified to make them accessible to citizen scientists. We tested whether a recent citizen science survey (the OPAL Air Survey) could detect trends in lichen community composition over transects away from roads. We hypothesised that the abundance of nitrophilic lichens would decrease with distance from the road, while that of nitrophobic lichens would increase. The hypothesised changes were detected along strong pollution gradients, but not where the road source was relatively weak, or background pollution relatively high. We conclude that the simplified OPAL methodology can detect large contrasts in nitrogenous pollution, but it may not be able to detect more subtle changes in pollution exposure. Similar studies are needed in conjunction with the ever-growing body of citizen science work to ensure that the limitations of these methods are fully understood. -- Highlights: •We investigated the validity of a simplified citizen science methodology. •Lichen abundance data were used to indicate nitrogenous air pollution. •Significant changes were detected beside busy roads with low background pollution. •The methodology detected major, but not subtle, contrasts in pollution. •Sensitivity of citizen science methods to environmental change must be evaluated. -- A simplified lichen biomonitoring method used for citizen science can detect the impact of nitrogenous air pollution from local roads

  4. Design methodology: edgeless 3D ASICs with complex in-pixel processing for pixel detectors

    Energy Technology Data Exchange (ETDEWEB)

    Fahim Farah, Fahim Farah [Northwestern U. (main); Deptuch, Grzegorz W. [Fermilab; Hoff, James R. [Fermilab; Mohseni, Hooman [Northwestern U. (main)

    2015-08-28

    The design methodology for the development of 3D integrated edgeless pixel detectors with in-pixel processing using Electronic Design Automation (EDA) tools is presented. A large area 3 tier 3D detector with one sensor layer and two ASIC layers containing one analog and one digital tier, is built for x-ray photon time of arrival measurement and imaging. A full custom analog pixel is 65μm x 65μm. It is connected to a sensor pixel of the same size on one side, and on the other side it has approximately 40 connections to the digital pixel. A 32 x 32 edgeless array without any peripheral functional blocks constitutes a sub-chip. The sub-chip is an indivisible unit, which is further arranged in a 6 x 6 array to create the entire 1.248cm x 1.248cm ASIC. Each chip has 720 bump-bond I/O connections, on the back of the digital tier to the ceramic PCB. All the analog tier power and biasing is conveyed through the digital tier from the PCB. The assembly has no peripheral functional blocks, and hence the active area extends to the edge of the detector. This was achieved by using a few flavors of almost identical analog pixels (minimal variation in layout) to allow for peripheral biasing blocks to be placed within pixels. The 1024 pixels within a digital sub-chip array have a variety of full custom, semi-custom and automated timing driven functional blocks placed together. The methodology uses a modified mixed-mode on-top digital implementation flow to not only harness the tool efficiency for timing and floor-planning but also to maintain designer control over compact parasitically aware layout. The methodology uses the Cadence design platform, however it is not limited to this tool.

  5. Methodology to design a municipal solid waste generation and composition map: a case study.

    Science.gov (United States)

    Gallardo, A; Carlos, M; Peris, M; Colomer, F J

    2015-02-01

    The municipal solid waste (MSW) management is an important task that local governments as well as private companies must take into account to protect human health, the environment and to preserve natural resources. To design an adequate MSW management plan the first step consists in defining the waste generation and composition patterns of the town. As these patterns depend on several socio-economic factors it is advisable to organize them previously. Moreover, the waste generation and composition patterns may vary around the town and over the time. Generally, the data are not homogeneous around the city as the number of inhabitants is not constant nor it is the economic activity. Therefore, if all the information is showed in thematic maps, the final waste management decisions can be made more efficiently. The main aim of this paper is to present a structured methodology that allows local authorities or private companies who deal with MSW to design its own MSW management plan depending on the available data. According to these data, this paper proposes two ways of action: a direct way when detailed data are available and an indirect way when there is a lack of data and it is necessary to take into account bibliographic data. In any case, the amount of information needed is considerable. This paper combines the planning methodology with the Geographic Information Systems to present the final results in thematic maps that make easier to interpret them. The proposed methodology is a previous useful tool to organize the MSW collection routes including the selective collection. To verify the methodology it has been successfully applied to a Spanish town. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Optimum design of district heating: Application of a novel methodology for improved design of community scale integrated energy systems

    International Nuclear Information System (INIS)

    Sanaei, Sayyed Mohammad; Nakata, Toshihiko

    2012-01-01

    The purpose of this paper is to present a new tool for design of integrated energy systems. The initial choice of the energy system components and the way they should interact is a crucial decision which the outcome of the design heavily relies on. Use of a physical law (instead of engineering judgment) as the basis of the decision making is the main advantage of the proposed approach over conventional approaches for design of community scale energy systems. The methodology has been implemented for design of a district heating system for an existing district in arid region of Iran. The optimum level of interaction between the energy system components has been identified by employing an optimization algorithm seeking to minimize the overall cost of the energy system. Some of the relative merits of the optimum design comparing to the present energy system are 17% increase of the exergy efficiency, 10.8% reduction in the amount of CO 2 production per capita and 2% reduction in overall energy related costs. -- Highlights: ► We propose a novel tool for design of integrated energy systems. ► Proposed tool has the advantage of using a physical principle (exergy matching) to define the design scenarios. ► Optimum design of district heating system was found subject to variations in energy prices and heating devices’ efficiencies. ► Contrary to energy efficiency, exergy efficiency clearly points out the design with best energetic performance. ► Exergy optimum design becomes the feasible option as the energy prices tend to rise towards the international prices.

  7. On a Modular Approach to the Design of Integrated Social Surveys

    Directory of Open Access Journals (Sweden)

    Ioannidis Evangelos

    2016-06-01

    Full Text Available This article considers a modular approach to the design of integrated social surveys. The approach consists of grouping variables into ‘modules’, each of which is then allocated to one or more ‘instruments’. Each instrument is then administered to a random sample of population units, and each sample unit responds to all modules of the instrument. This approach offers a way of designing a system of integrated social surveys that balances the need to limit the cost and the need to obtain sufficient information. The allocation of the modules to instruments draws on the methodology of split questionnaire designs. The composition of the instruments, that is, how the modules are allocated to instruments, and the corresponding sample sizes are obtained as a solution to an optimisation problem. This optimisation involves minimisation of respondent burden and data collection cost, while respecting certain design constraints usually encountered in practice. These constraints may include, for example, the level of precision required and dependencies between the variables. We propose using a random search algorithm to find approximate optimal solutions to this problem. The algorithm is proved to fulfil conditions that ensure convergence to the global optimum and can also produce an efficient design for a split questionnaire.

  8. 2007 National Roadside Survey of Alcohol and Drug Use by Drivers: Methodology

    Science.gov (United States)

    2009-12-01

    This report describes the methodology for the 2007 U.S. national field study to estimate the prevalence of alcohol-, drug-, and alcohol-and-drug-involved driving, primarily among nighttime weekend drivers, but also daytime Friday drivers. This study ...

  9. A European study on alcohol and drug use among young drivers: the TEND by Night study design and methodology

    Directory of Open Access Journals (Sweden)

    Siliquini Roberta

    2010-04-01

    Full Text Available Abstract Background Young individuals are the age group with the highest risk of car accidents. One of main explanations relies on the use of psychoactive substances (alcohol, illegal and medicinal drugs, which are known to be major risk factors of road accidents, and whose consumption is almost universally more common among younger drivers. Although the correlation between psychoactive substances use and decrease in driving performance has been established in controlled experimental or laboratory settings, few studies were conducted in naturalistic circumstances. The TEND by Night project has been designed to evaluate the relationship between driving performance and psychoactive substances assumption in young drivers enrolled at typical places of consumption. Methods/Design The TEND by Night project, endorsed by the European Commission, is a multidisciplinary, multi-centric, cross-sectional study conducted in six European countries (Italy, Belgium/Netherlands, Bulgaria, Spain, Poland and Latvia. The study population consists of 5000 young drivers aged 16-34 years, attending recreational sites during weekend nights. The intervention is based on the portal survey technique and includes several steps at the entrance and exit of selected sites, including the administration of semi-structured questionnaires, breath alcohol test, several drug assumption test, and measurement of the reaction time using a driving simulator. The main outcome is the difference in reaction time between the entrance and exit of the recreation site, and its correlation with psychoactive substances use. As a secondary outcome it will be explored the relationship between reaction time difference and the amount of consumption of each substance. All analyses will be multivariate. Discussion The project methodology should provide some relevant advantages over traditional survey systems. The main strengths of the study include the large and multicentric sample, the objective

  10. Design Methodology: ASICs with complex in-pixel processing for Pixel Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Fahim, Farah [Fermilab

    2014-10-31

    The development of Application Specific Integrated Circuits (ASIC) for pixel detectors with complex in-pixel processing using Computer Aided Design (CAD) tools that are, themselves, mainly developed for the design of conventional digital circuits requires a specialized approach. Mixed signal pixels often require parasitically aware detailed analog front-ends and extremely compact digital back-ends with more than 1000 transistors in small areas below 100μm x 100μm. These pixels are tiled to create large arrays, which have the same clock distribution and data readout speed constraints as in, for example, micro-processors. The methodology uses a modified mixed-mode on-top digital implementation flow to not only harness the tool efficiency for timing and floor-planning but also to maintain designer control over compact parasitically aware layout.

  11. Efficient size control of amphiphilic cyclodextrin nanoparticles through a statistical mixture design methodology.

    Science.gov (United States)

    Choisnard, Luc; Géze, Annabelle; Bigan, Muriel; Putaux, Jean-Luc; Wouessidjewe, Denis

    2005-12-06

    the aim of the study was to investigate size control of amphiphilic beta-cyclodextrin nanoparticles obtained by solvent displacement technique. An experimental design methodology for mixture design was undertaken using D-optimal approach with the following technique variables: water fraction X1 (40-70% v/v), acetone fraction X2 (0-60% v/v) and ethanol fraction X3 (0-60% v/v). The resulting quadratic model obtained after logarithmic transformation of data and partial least-square regression was statistically validated and experimentally checked. Also, the morphology of the colloidal nanoparticles from selected experiments was observed by cryo-transmission electron microscopy. This experimental design approach allowed to produce interesting amphiphilic beta-cyclodextrin nanoparticles with a predicted mean size varying from 60 to 400 nm.

  12. Preferences design information on the Internet. A new methodological proposal, carried out with the university students

    Directory of Open Access Journals (Sweden)

    Lic. Ana Isabel Bernal Triviño

    2008-01-01

    Full Text Available The purpose of this research is to learn about the preferences of young people on the design of information in the media on the Internet. The research takes the view that the sample of students is selected from eight designs real information online. First valued in a quantitative way and then justify their responses. The quantitative and qualitative methodology allows the results benefit from statistical rigor and greater depth. Due to the number of elements that make up the message visual information, this exploratory research pretending to know which are the most Initial findings have realized that the main preferences are linked to the presence of the media and typographical. With this data has begun a new investigation that materializa only in a quantitative way, the importance of the components of the design cited.

  13. A Methodology for the Design of Robotic Hands with Multiple Fingers

    Directory of Open Access Journals (Sweden)

    Jorge Eduardo Parada Puig

    2008-11-01

    Full Text Available This paper presents a methodology that has been applied for a design process of anthropomorphic hands with multiple fingers. Biomechanical characteristics of human hand have been analysed so that ergonomic and anthropometric aspects have been used as fundamental references for obtaining grasping mechanisms. A kinematic analysis has been proposed to define the requirements for designing grasping functions. Selection of materials and actuators has been discussed too. This topic has been based on previous experiences with prototypes that have been developed at the Laboratory of Robotics and Mechatronics (LARM of the University of Cassino. An example of the application of the proposed method has been presented for the design of a first prototype of LARM Hand.

  14. Numerical simulation methodologies for design and development of Diffuser-Augmented Wind Turbines - analysis and comparison

    Science.gov (United States)

    Michał, Lipian; Maciej, Karczewski; Jakub, Molinski; Krzysztof, Jozwik

    2016-01-01

    Different numerical computation methods used to develop a methodology for fast, efficient, reliable design and comparison of Diffuser-Augmented Wind Turbine (DAWT) geometries are presented. The demand for such methods is evident, following the multitude of geometrical parameters that influence the flow character through ducted turbines. The results of the Actuator Disk Model (ADM) simulations will be confronted with a simulation method of higher order of accuracy, i.e. the 3D Fully-resolved Rotor Model (FRM) in the rotor design point. Both will be checked for consistency with the experimental results measured in the wind tunnel at the Institute of Turbo-machinery (IMP), Lodz University of Technology (TUL). An attempt to find an efficient method (with a compromise between accuracy and design time) for the flow analysis pertinent to the DAWT is a novel approach presented in this paper.

  15. The Best Location for Speed Bump Installation Using Experimental Design Methodology

    Directory of Open Access Journals (Sweden)

    Alireza Khademi

    2013-12-01

    Full Text Available Speed bumps, as traffic calming devices, have been extensively used to reduce traffic speed on local streets. This study represents a unique application of experimental design methodology where the effects of some controllable factors in determining the best location for installing speed bumps before stop points (e.g. entry gates, road junctions were investigated. Through Classical Design of Experiments (DOE, the optimum location of the speed bump was obtained based on the graphical plots of the significant effects. The speed at the stop point was treated as the response and minimum speed is desirable. Design-Expert® software was used to evaluate and analyze the results obtained. The suggested mathematical model effectively explains the performance indicators within the ranges of the factors. The car speed is the most significant factor that affects the distance-time in comparison with other factors, which provides secondary contributions.

  16. Enhancing the design and management of a local organic food supply chain with Soft Systems Methodology

    DEFF Research Database (Denmark)

    Tavella, Elena; Hjortsø, Carsten Nico Portefée

    2012-01-01

    Supply chain partners for local organic food face uncertainties such as poor collaboration and communication that cannot be reduced through the application of traditional supply chain design and management techniques. Such techniques are known to improve supply chain coordination, but they do...... not adequately consider major aspects of local organic food supply chains such as ethics, sustainability and human values. Supply chain design and management approaches suita-ble to small-scale, local organic food enterprises are lacking and need to be developed. The aim of this paper is to suggest Soft Systems...... Methodology (SSM) as a new and suitable ap-proach to design and manage local organic food supply chains. We illustrate how SSM can be used to reduce uncertainties within local organic food supply chains based on a German case. This illustration serves to identify the benefits of using SSM, compared with ad...

  17. Design and validation of the Quantum Mechanics Conceptual Survey

    Directory of Open Access Journals (Sweden)

    S. B. McKagan

    2010-11-01

    Full Text Available The Quantum Mechanics Conceptual Survey (QMCS is a 12-question survey of students’ conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included observations of students, a review of previous literature and textbooks and syllabi, faculty and student interviews, and statistical analysis. We also discuss issues in the development of specific questions, which may be useful both for instructors who wish to use the QMCS in their classes and for researchers who wish to conduct further research of student understanding of quantum mechanics. The QMCS has been most thoroughly tested in, and is most appropriate for assessment of (as a posttest only, sophomore-level modern physics courses. We also describe testing with students in junior quantum courses and graduate quantum courses, from which we conclude that the QMCS may be appropriate for assessing junior quantum courses, but is not appropriate for assessing graduate courses. One surprising result of our faculty interviews is a lack of faculty consensus on what topics should be taught in modern physics, which has made designing a test that is valued by a majority of physics faculty more difficult than expected.

  18. Survey design for precise fire management conservation targets.

    Science.gov (United States)

    Sitters, Holly; Di Stefano, Julian; Wills, Timothy; Swan, Matthew; York, Alan

    2018-01-01

    Common goals of ecological fire management are to sustain biodiversity and minimize extinction risk. A novel approach to achieving these goals determines the relative proportions of vegetation growth stages (equivalent to successional stages, which are categorical representations of time since fire) that maximize a biodiversity index. The method combines data describing species abundances in each growth stage with numerical optimization to define an optimal growth-stage structure that provides a conservation-based operational target for managers. However, conservation targets derived from growth-stage optimization are likely to depend critically on choices regarding input data. There is growing interest in the use of growth-stage optimization as a basis for fire management, thus understanding of how input data influence the outputs is crucial. Simulated data sets provide a flexible platform for systematically varying aspects of survey design and species inclusions. We used artificial data with known properties, and a case-study data set from southeastern Australia, to examine the influence of (1) survey design (total number of sites and their distribution among growth stages) and (2) species inclusions (total number of species and their level of specialization) on the precision of conservation targets. Based on our findings, we recommend that survey designs for precise estimates would ideally involve at least 80 sites, and include at least 80 species. Greater numbers of sites and species will yield increasingly reliable results, but fewer might be sufficient in some circumstances. An even distribution of sites among growth stages was less important than the total number of sites, and omission of species is unlikely to have a major influence on results as long as several species specialize on each growth stage. We highlight the importance of examining the responses of individual species to growth stage before feeding survey data into the growth-stage optimization

  19. Methodology on sizing and selecting thermoelectric cooler from different TEC manufacturers in cooling system design

    International Nuclear Information System (INIS)

    Tan, F.L.; Fok, S.C.

    2008-01-01

    The search and selection for a suitable thermoelectric cooler (TEC) to optimize a cooling system design can be a tedious task as there are many product ranges from several TEC manufacturers. Although the manufacturers do provide proprietary manuals or electronic search facilities for their products, the process is still cumbersome as these facilities are incompatible. The electronic facilities often have different user interfaces and functionalities, while the manual facilities have different presentations of the performance characteristics. This paper presents a methodology to assist the designer to size and select the TECs from different manufacturers. The approach will allow designers to find quickly and to evaluate the devices from different TEC manufacturers. Based on the approach, the article introduces a new operational framework for an Internet based thermoelectric cooling system design process that would promote the interaction and collaboration between the designers and TEC manufacturers. It is hoped that this work would be useful for the advancement of future tools to assist designers to develop, analyze and optimize thermoelectric cooling system design in minimal time using the latest TECs available on the market

  20. Multirate Flutter Suppression System Design for the Benchmark Active Controls Technology Wing. Part 2; Methodology Application Software Toolbox

    Science.gov (United States)

    Mason, Gregory S.; Berg, Martin C.; Mukhopadhyay, Vivek

    2002-01-01

    To study the effectiveness of various control system design methodologies, the NASA Langley Research Center initiated the Benchmark Active Controls Project. In this project, the various methodologies were applied to design a flutter suppression system for the Benchmark Active Controls Technology (BACT) Wing. This report describes the user's manual and software toolbox developed at the University of Washington to design a multirate flutter suppression control law for the BACT wing.

  1. Decomposing response error in food consumption measurement: Implications for survey design from a randomized survey experiment in Tanzania

    OpenAIRE

    Friedman, Jed; Beegle, Kathleen; De Weerdt, Joachim; Gibson, John K.

    2016-01-01

    Abstract: There is wide variation in how consumption is measured in household surveys, both across countries and over time. This variation may confound welfare comparisons in part because these alternative survey designs produce consumption estimates differentially influenced by contrasting types of survey response error. While previous studies have documented the extent of net error in alternative survey designs, little is known about the relative influence of the different response errors t...

  2. The EuroPrevall-INCO surveys on the prevalence of food allergies in children from China, India and Russia: the study methodology.

    Science.gov (United States)

    Wong, G W K; Mahesh, P A; Ogorodova, L; Leung, T F; Fedorova, O; Holla, A D; Fernandez-Rivas, M; Clare Mills, E N; Kummeling, I; van Ree, R; Yazdanbakhsh, M; Burney, P

    2010-03-01

    Very little is known regarding the global variations in the prevalence of food allergies. The EuroPrevall-INCO project has been developed to evaluate the prevalence of food allergies in China, India and Russia using the standardized methodology of the EuroPrevall protocol used for studies in the European Union. The epidemiological surveys of the project were designed to estimate variations in the prevalence of food allergy and exposure to known or suspected risk factors for food allergy and to compare the data with different European countries. Random samples of primary schoolchildren were recruited from urban and rural regions of China, Russia and India for screening to ascertain possible adverse reactions to foods. Cases and controls were then selected to answer a detailed questionnaire designed to evaluate the possible risk factors of food allergies. Objective evidence of sensitisation including skin-prick test and serum specific IgE measurement was also collected. More than 37 000 children from the three participating countries have been screened. The response rates for the screening phase ranged from 83% to 95%. More than 3000 cases and controls were studied in the second phase of the study. Further confirmation of food allergies by double blind food challenge was conducted. This will be the first comparative study of the epidemiology of food allergies in China, India, and Russia using the same standardized methodology. The findings of these surveys will complement the data obtained from Europe and provide insights into the development of food allergy.

  3. LOADS INTERACTION DOMAINS METHODOLOGY FOR THE DESIGN OF STEEL GREENHOUSE STRUCTURES

    Directory of Open Access Journals (Sweden)

    Sergio Castellano

    2007-03-01

    Full Text Available Aim of this research is to develop a design methodology which correlates main structural design parameters, whose production is characterised by high levels of standardization, such as the height of gutter or the distance between frames, with actions on the greenhouse. The methodology, based on the use of charts and abacus, permits a clear and a direct interpretation of the structural response to design load combinations and allows the design of structural improvements with the aim of the optimization of the ratio benefits (structural strength/costs. The study of structural interaction domains allowed a clear and a direct interpretation of the structural response to design load combinations. The diagrams highlight not only if the structure fulfils the standard requirements but also the safety levels with respect to design load combinations and allow the structural designer how to operate in order to optimize the structural response with standard requirements achieving the best ratio benefits (structural safety/ costs. The methodology was developed basing on criteria assigned by EN13031 on two different kinds of greenhouse structures: an arched greenhouse with a film plastic covering and a duo pitched roof greenhouse cover with rigid plastic membranes. Structural interaction domains for arched greenhouse showed a better capability of the structure to resist to vertical loads then to horizontal one. Moreover, the climatic load distribution on the structure assigned by EN13031 is such that the combination of climatic actions is less dangerous for the structure then their individual application. Whilst, duo pitched roof steel greenhouse interaction domains, showed a better capability of the structure to resist to vertical loads then to horizontal one and that, in any case, the serviceability limit states analysis is more strict then the ULS one. The shape of structural domains highlighted that the combination of actions is more dangerous for the

  4. A SystemC-Based Design Methodology for Digital Signal Processing Systems

    Directory of Open Access Journals (Sweden)

    Christian Haubelt

    2007-03-01

    Full Text Available Digital signal processing algorithms are of big importance in many embedded systems. Due to complexity reasons and due to the restrictions imposed on the implementations, new design methodologies are needed. In this paper, we present a SystemC-based solution supporting automatic design space exploration, automatic performance evaluation, as well as automatic system generation for mixed hardware/software solutions mapped onto FPGA-based platforms. Our proposed hardware/software codesign approach is based on a SystemC-based library called SysteMoC that permits the expression of different models of computation well known in the domain of digital signal processing. It combines the advantages of executability and analyzability of many important models of computation that can be expressed in SysteMoC. We will use the example of an MPEG-4 decoder throughout this paper to introduce our novel methodology. Results from a five-dimensional design space exploration and from automatically mapping parts of the MPEG-4 decoder onto a Xilinx FPGA platform will demonstrate the effectiveness of our approach.

  5. Gotta survey somebody : Methodological challenges in population studies of older people

    OpenAIRE

    Kelfve, Susanne

    2015-01-01

    Conducting representative surveys of older people is challenging. This thesis aims to analyze a) the characteristics of individuals at risk of being underrepresented in surveys of older people, b) the systematic errors likely to occur as a result of these selections, and c) whether these systematic errors can be minimized by weighting adjustments.   In Study I, we investigated a) who would be missing from a survey that excluded those living in institutions and that did not use indirect interv...

  6. Proposed Methodology for Design of Carbon Fiber Reinforced Polymer Spike Anchors into Reinforced Concrete

    Energy Technology Data Exchange (ETDEWEB)

    MacFarlane, Eric Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-26

    The included methodology, calculations, and drawings support design of Carbon Fiber Reinforced Polymer (CFRP) spike anchors for securing U-wrap CFRP onto reinforced concrete Tbeams. This content pertains to an installation in one of Los Alamos National Laboratory’s facilities. The anchors are part of a seismic rehabilitation to the subject facility. The information contained here is for information purposes only. The reader is encouraged to verify all equations, details, and methodology prior to usage in future projects. However, development of the content contained here complied with Los Alamos National Laboratory’s NQA-1 quality assurance program for nuclear structures. Furthermore, the formulations and details came from the referenced published literature. This literature represents the current state of the art for FRP anchor design. Construction personnel tested the subject anchor design to the required demand level demonstrated in the calculation. The testing demonstrated the ability of the anchors noted to carry loads in excess of 15 kips in direct tension. The anchors were not tested to failure in part because of the hazards associated with testing large-capacity tensile systems to failure. The calculation, methodology, and drawing originator was Eric MacFarlane of Los Alamos National Laboratory’s (LANL) Office of Seismic Hazards and Risk Mitigation (OSHRM). The checker for all components was Mike Salmon of the LANL OSHRM. The independent reviewers of all components were Insung Kim and Loring Wyllie of Degenkolb Engineers. Note that Insung Kim contributed to the initial formulations in the calculations that pertained directly to his Doctoral research.

  7. Application of Full Factorial Experimental Design and Response Surface Methodology for Chromite Beneficiation by Knelson Concentrator

    Directory of Open Access Journals (Sweden)

    Gul Akar Sen

    2016-01-01

    Full Text Available The present work is undertaken to determine the effect of operational variables, namely: feed rate, centrifugal force and fluidization water flow rate on the efficiency of Knelson concentrator for chromite ore beneficiation. A full factorial design with three factors at three levels and response surface methodology (RSM were applied for this purpose. The quadratic models were developed to predict the concentrate Cr2O3 grade and recovery as the process responses. The results suggest that all the variables affect the grade and recovery of the Cr2O3 concentrate to some degree. However, the fluidization water rate was found as the most effective parameter.

  8. Modeling and design methodology for metal-insulator-metal plasmonic Bragg reflectors.

    Science.gov (United States)

    Hosseini, Amir; Nejati, Hamid; Massoud, Yehia

    2008-02-04

    In this paper, we present a modeling and design methodology based on characteristic impedance for plasmonic waveguides with Metal-Insulator-Metal (MIM) configuration. Finite-Difference Time-Domain (FDTD) simulations indicate that the impedance matching results in negligible reflection at discontinuities in MIM heterostructures. Leveraging the MIM impedance model, we present a general Transfer Matrix Method model for MIM Bragg reflectors and validate our model against FDTD simulations. We show that both periodically stacked dielectric layers of different thickness or different material can achieve the same performance in terms of propagation loss and minimum transmission at the central bandgap frequency in the case of a finite number of periods.

  9. Systematic Methodology for Design of Tailor-Made Blended Products: Fuels and Other Blended Products

    DEFF Research Database (Denmark)

    Yunus, Nor Alafiza Binti

    A tailor-made blended liquid product is defined as a formulation of various chemicals in the liquid state to obtain a liquid mixture with a specific set of desired characteristics and qualities. Examples of blended liquid products are synthetic fuels and lubricants. This type of products is very ...... methodology and tools was tested through two case studies. In the first case study, two different gasoline blend problems have been solved. In the second case study, four different lubricant design problems have been solved....

  10. BIM Methodology Approach to Infrastructure Design: Case Study of Paniga Tunnel

    Science.gov (United States)

    Osello, Anna; Rapetti, Niccolò; Semeraro, Francesco

    2017-10-01

    Nowadays, the implementation of Building Information Modelling (BIM) in civil design represent a new challenge for the AECO (Architecture, Engineering, Construction, Owner and Operator) world, which will involve the interest of many researchers in the next years. It is due to the incentives of Public Administration and European Directives that aim to improve the efficiency and to enhance a better management of the complexity of infrastructure projects. For these reasons, the goal of this research is to propose a methodology for the use of BIM in a tunnel project, analysing the definition of a correct level of detail (LOD) and the possibility to share information via interoperability for FEM analysis.

  11. A Human-Centered Design Methodology to Enhance the Usability, Human Factors, and User Experience of Connected Health Systems: A Three-Phase Methodology.

    Science.gov (United States)

    Harte, Richard; Glynn, Liam; Rodríguez-Molinero, Alejandro; Baker, Paul Ma; Scharf, Thomas; Quinlan, Leo R; ÓLaighin, Gearóid

    2017-03-16

    Design processes such as human-centered design, which involve the end user throughout the product development and testing process, can be crucial in ensuring that the product meets the needs and capabilities of the user, particularly in terms of safety and user experience. The structured and iterative nature of human-centered design can often present a challenge when design teams are faced with the necessary, rapid, product development life cycles associated with the competitive connected health industry. We wanted to derive a structured methodology that followed the principles of human-centered design that would allow designers and developers to ensure that the needs of the user are taken into account throughout the design process, while maintaining a rapid pace of development. In this paper, we present the methodology and its rationale before outlining how it was applied to assess and enhance the usability, human factors, and user experience of a connected health system known as the Wireless Insole for Independent and Safe Elderly Living (WIISEL) system, a system designed to continuously assess fall risk by measuring gait and balance parameters associated with fall risk. We derived a three-phase methodology. In Phase 1 we emphasized the construction of a use case document. This document can be used to detail the context of use of the system by utilizing storyboarding, paper prototypes, and mock-ups in conjunction with user interviews to gather insightful user feedback on different proposed concepts. In Phase 2 we emphasized the use of expert usability inspections such as heuristic evaluations and cognitive walkthroughs with small multidisciplinary groups to review the prototypes born out of the Phase 1 feedback. Finally, in Phase 3 we emphasized classical user testing with target end users, using various metrics to measure the user experience and improve the final prototypes. We report a successful implementation of the methodology for the design and development

  12. A Human-Centered Design Methodology to Enhance the Usability, Human Factors, and User Experience of Connected Health Systems: A Three-Phase Methodology

    Science.gov (United States)

    Harte, Richard; Glynn, Liam; Rodríguez-Molinero, Alejandro; Baker, Paul MA; Scharf, Thomas; ÓLaighin, Gearóid

    2017-01-01

    Background Design processes such as human-centered design, which involve the end user throughout the product development and testing process, can be crucial in ensuring that the product meets the needs and capabilities of the user, particularly in terms of safety and user experience. The structured and iterative nature of human-centered design can often present a challenge when design teams are faced with the necessary, rapid, product development life cycles associated with the competitive connected health industry. Objective We wanted to derive a structured methodology that followed the principles of human-centered design that would allow designers and developers to ensure that the needs of the user are taken into account throughout the design process, while maintaining a rapid pace of development. In this paper, we present the methodology and its rationale before outlining how it was applied to assess and enhance the usability, human factors, and user experience of a connected health system known as the Wireless Insole for Independent and Safe Elderly Living (WIISEL) system, a system designed to continuously assess fall risk by measuring gait and balance parameters associated with fall risk. Methods We derived a three-phase methodology. In Phase 1 we emphasized the construction of a use case document. This document can be used to detail the context of use of the system by utilizing storyboarding, paper prototypes, and mock-ups in conjunction with user interviews to gather insightful user feedback on different proposed concepts. In Phase 2 we emphasized the use of expert usability inspections such as heuristic evaluations and cognitive walkthroughs with small multidisciplinary groups to review the prototypes born out of the Phase 1 feedback. Finally, in Phase 3 we emphasized classical user testing with target end users, using various metrics to measure the user experience and improve the final prototypes. Results We report a successful implementation of the

  13. Development of a design methodology for hydraulic pipelines carrying rectangular capsules

    International Nuclear Information System (INIS)

    Asim, Taimoor; Mishra, Rakesh; Abushaala, Sufyan; Jain, Anuj

    2016-01-01

    The scarcity of fossil fuels is affecting the efficiency of established modes of cargo transport within the transportation industry. Efforts have been made to develop innovative modes of transport that can be adopted for economic and environmental friendly operating systems. Solid material, for instance, can be packed in rectangular containers (commonly known as capsules), which can then be transported in different concentrations very effectively using the fluid energy in pipelines. For economical and efficient design of such systems, both the local flow characteristics and the global performance parameters need to be carefully investigated. Published literature is severely limited in establishing the effects of local flow features on system characteristics of Hydraulic Capsule Pipelines (HCPs). The present study focuses on using a well validated Computational Fluid Dynamics (CFD) tool to numerically simulate the solid-liquid mixture flow in both on-shore and off-shore HCPs applications including bends. Discrete Phase Modelling (DPM) has been employed to calculate the velocity of the rectangular capsules. Numerical predictions have been used to develop novel semi-empirical prediction models for pressure drop in HCPs, which have then been embedded into a robust and user-friendly pipeline optimisation methodology based on Least-Cost Principle. - Highlights: • Local flow characteristics in a pipeline transporting rectangular capsules. • Development of prediction models for the pressure drop contribution of capsules. • Methodology developed for sizing of Hydraulic Capsule Pipelines. • Implementation of the developed methodology to obtain optimal pipeline diameter.

  14. Development of design methodology for communication network in nuclear power plants

    International Nuclear Information System (INIS)

    Kim, Dong Hoon; Seong, Seung Hwan; Jang Gwi Sook; Koo, In Soo; Lee Soon Sung.

    1996-06-01

    This report describe the design methodology of communication network (CN) in nuclear power plants (NPPs). The construction procedure for the NPP CN consists of 4 phases, in study and review phase, design concepts and goals are established through technical review, collection of background information and feasibility study. In design phase, all of design activities such as extraction of requirements, communication modelling, overall and detail architecture design are performed. Implementation and test phase includes the manufacturing, installation and testing of hardware and software. In operation phase, CN construction is finalized through the evaluation and correction during operation. The requirements of CN consist of general requirements such as function, structure, reliability, standardization and detail requirements related with protocol, media, error, performance and etc. CN design also should follow the safety-related requirements such as isolation, redundancy, reliability and verify these requirements. For the selection of each technical element form commercial CN, the evaluation and selection elements are extracted from reliability, performance, operating factors and the required-level which classified into essential, primary, preference, recommendation should be assigned to each element. This report will be used as a technical reference for the CN implementation in NPP. (author). 3 tabs., 5 figs., 25 refs

  15. Development of design methodology for communication network in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Hoon; Seong, Seung Hwan; Jang Gwi Sook; Koo, In Soo; Lee Soon Sung

    1996-06-01

    This report describe the design methodology of communication network (CN) in nuclear power plants (NPPs). The construction procedure for the NPP CN consists of 4 phases, in study and review phase, design concepts and goals are established through technical review, collection of background information and feasibility study. In design phase, all of design activities such as extraction of requirements, communication modelling, overall and detail architecture design are performed. Implementation and test phase includes the manufacturing, installation and testing of hardware and software. In operation phase, CN construction is finalized through the evaluation and correction during operation. The requirements of CN consist of general requirements such as function, structure, reliability, standardization and detail requirements related with protocol, media, error, performance and etc. CN design also should follow the safety-related requirements such as isolation, redundancy, reliability and verify these requirements. For the selection of each technical element form commercial CN, the evaluation and selection elements are extracted from reliability, performance, operating factors and the required-level which classified into essential, primary, preference, recommendation should be assigned to each element. This report will be used as a technical reference for the CN implementation in NPP. (author). 3 tabs., 5 figs., 25 refs.

  16. Shape slack: a design-manufacturing co-optimization methodology using tolerance information

    Science.gov (United States)

    Banerjee, Shayak; Agarwal, Kanak B.; Nassif, Sani; Orshansky, Michael

    2013-01-01

    The move to low-k1 lithography makes it increasingly difficult to print feature sizes that are a small fraction of the wavelength of light. With further delay in the delivery of extreme ultraviolet lithography, these difficulties will motivate the research community to explore increasingly broad solutions. We propose that there is significant research potential in studying the essential premise of the design/manufacturing handoff paradigm. Today this premise revolves around design rules that define what implementations are legal, and raw shapes, which define design intent, and are treated as a fixed requirement for lithography. In reality, layout features may vary within certain tolerances without violating any design constraints. The knowledge of such tolerances can help improve the manufacturability of layout features while still meeting design requirements. We propose a methodology to convert electrical slack in a design to shape slack or tolerances on individual layout shapes. We show how this can be done for two important implementation fabrics: (a) cell-library-based digital logic and (b) static random access memory. We further develop a tolerance-driven optical proximity correction algorithm that utilizes this shape slack information during mask preparation to ensure that all features prints within their shape slacks in presence of lithographic process variations. Experiments on 45 nm silicon on insulator cells using accurate process models show that this approach reduces postlithography delay errors by 50%, and layout hotspots by 47% compared to conventional methods.

  17. Human factors analysis and design methods for nuclear waste retrieval systems. Human factors design methodology and integration plan

    International Nuclear Information System (INIS)

    Casey, S.M.

    1980-06-01

    The purpose of this document is to provide an overview of the recommended activities and methods to be employed by a team of human factors engineers during the development of a nuclear waste retrieval system. This system, as it is presently conceptualized, is intended to be used for the removal of storage canisters (each canister containing a spent fuel rod assembly) located in an underground salt bed depository. This document, and the others in this series, have been developed for the purpose of implementing human factors engineering principles during the design and construction of the retrieval system facilities and equipment. The methodology presented has been structured around a basic systems development effort involving preliminary development, equipment development, personnel subsystem development, and operational test and evaluation. Within each of these phases, the recommended activities of the human engineering team have been stated, along with descriptions of the human factors engineering design techniques applicable to the specific design issues. Explicit examples of how the techniques might be used in the analysis of human tasks and equipment required in the removal of spent fuel canisters have been provided. Only those techniques having possible relevance to the design of the waste retrieval system have been reviewed. This document is intended to provide the framework for integrating human engineering with the rest of the system development effort. The activities and methodologies reviewed in this document have been discussed in the general order in which they will occur, although the time frame (the total duration of the development program in years and months) in which they should be performed has not been discussed

  18. Human factors analysis and design methods for nuclear waste retrieval systems. Human factors design methodology and integration plan

    Energy Technology Data Exchange (ETDEWEB)

    Casey, S.M.

    1980-06-01

    The purpose of this document is to provide an overview of the recommended activities and methods to be employed by a team of human factors engineers during the development of a nuclear waste retrieval system. This system, as it is presently conceptualized, is intended to be used for the removal of storage canisters (each canister containing a spent fuel rod assembly) located in an underground salt bed depository. This document, and the others in this series, have been developed for the purpose of implementing human factors engineering principles during the design and construction of the retrieval system facilities and equipment. The methodology presented has been structured around a basic systems development effort involving preliminary development, equipment development, personnel subsystem development, and operational test and evaluation. Within each of these phases, the recommended activities of the human engineering team have been stated, along with descriptions of the human factors engineering design techniques applicable to the specific design issues. Explicit examples of how the techniques might be used in the analysis of human tasks and equipment required in the removal of spent fuel canisters have been provided. Only those techniques having possible relevance to the design of the waste retrieval system have been reviewed. This document is intended to provide the framework for integrating human engineering with the rest of the system development effort. The activities and methodologies reviewed in this document have been discussed in the general order in which they will occur, although the time frame (the total duration of the development program in years and months) in which they should be performed has not been discussed.

  19. Demonstrating the Potential for Web-Based Survey Methodology with a Case Study.

    Science.gov (United States)

    Mertler, Craig

    2002-01-01

    Describes personal experience with using the Internet to administer a teacher-motivation and job-satisfaction survey to elementary and secondary teachers. Concludes that advantages of Web-base surveys, such as cost savings and efficiency of data collection, outweigh disadvantages, such as the limitations of listservs. (Contains 10 references.)…

  20. SEDS: THE SPITZER EXTENDED DEEP SURVEY. SURVEY DESIGN, PHOTOMETRY, AND DEEP IRAC SOURCE COUNTS

    Energy Technology Data Exchange (ETDEWEB)

    Ashby, M. L. N.; Willner, S. P.; Fazio, G. G.; Huang, J.-S.; Hernquist, L.; Hora, J. L. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St., Cambridge, MA 02138 (United States); Arendt, R. [Observational Cosmology Laboratory, Code 665, Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Barmby, P. [University of Western Ontario, London, ON N6A 3K7 (Canada); Barro, G.; Faber, S.; Guhathakurta, P. [University of California Observatories/Lick Observatory and Department of Astronomy and Astrophysics University of California Santa Cruz, 1156 High St., Santa Cruz, CA 95064 (United States); Bell, E. F. [Department of Astronomy, University of Michigan, 500 Church St., Ann Arbor, MI 48109 (United States); Bouwens, R. [Leiden Observatory, Leiden University, NL-2300 RA Leiden (Netherlands); Cattaneo, A. [Aix Marseille Universite, CNRS, Laboratoire d' Astrophysique de Marseille, UMR 7326, F-13388, Marseille (France); Croton, D. [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, P.O. Box 218 Hawthorn, VIC 3122 (Australia); Dave, R. [Department of Astronomy, University of Arizona, Tucson, AZ 85721 (United States); Dunlop, J. S. [Scottish Universities Physics Alliance, Institute for Astronomy, University of Edinburgh, Royal Observatory, Edinburgh, EH9 3HJ (United Kingdom); Egami, E. [Steward Observatory, University of Arizona, 933 N. Cherry Ave, Tucson, AZ 85721 (United States); Finlator, K. [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, Juliane Maries Vej 30, CK-2100 Copenhagen O (Denmark); Grogin, N. A., E-mail: mashby@cfa.harvard.edu [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); and others

    2013-05-20

    The Spitzer Extended Deep Survey (SEDS) is a very deep infrared survey within five well-known extragalactic science fields: the UKIDSS Ultra-Deep Survey, the Extended Chandra Deep Field South, COSMOS, the Hubble Deep Field North, and the Extended Groth Strip. SEDS covers a total area of 1.46 deg{sup 2} to a depth of 26 AB mag (3{sigma}) in both of the warm Infrared Array Camera (IRAC) bands at 3.6 and 4.5 {mu}m. Because of its uniform depth of coverage in so many widely-separated fields, SEDS is subject to roughly 25% smaller errors due to cosmic variance than a single-field survey of the same size. SEDS was designed to detect and characterize galaxies from intermediate to high redshifts (z = 2-7) with a built-in means of assessing the impact of cosmic variance on the individual fields. Because the full SEDS depth was accumulated in at least three separate visits to each field, typically with six-month intervals between visits, SEDS also furnishes an opportunity to assess the infrared variability of faint objects. This paper describes the SEDS survey design, processing, and publicly-available data products. Deep IRAC counts for the more than 300,000 galaxies detected by SEDS are consistent with models based on known galaxy populations. Discrete IRAC sources contribute 5.6 {+-} 1.0 and 4.4 {+-} 0.8 nW m{sup -2} sr{sup -1} at 3.6 and 4.5 {mu}m to the diffuse cosmic infrared background (CIB). IRAC sources cannot contribute more than half of the total CIB flux estimated from DIRBE data. Barring an unexpected error in the DIRBE flux estimates, half the CIB flux must therefore come from a diffuse component.

  1. A Proposed Theory Seeded Methodology for Design Based Research into Effective Use of MUVES in Vocational Education Contexts

    Science.gov (United States)

    Cochrane, Todd; Davis, Niki; Morrow, Donna

    2013-01-01

    A methodology for design based research (DBR) into effective development and use of Multi-User Virtual Environments (MUVE) in vocational education is proposed. It blends software development with DBR with two theories selected to inform the methodology. Legitimate peripheral participation LPP (Lave & Wenger, 1991) provides a filter when…

  2. Combining qualitative and quantitative research within mixed method research designs: a methodological review.

    Science.gov (United States)

    Östlund, Ulrika; Kidd, Lisa; Wengström, Yvonne; Rowa-Dewar, Neneh

    2011-03-01

    It has been argued that mixed methods research can be useful in nursing and health science because of the complexity of the phenomena studied. However, the integration of qualitative and quantitative approaches continues to be one of much debate and there is a need for a rigorous framework for designing and interpreting mixed methods research. This paper explores the analytical approaches (i.e. parallel, concurrent or sequential) used in mixed methods studies within healthcare and exemplifies the use of triangulation as a methodological metaphor for drawing inferences from qualitative and quantitative findings originating from such analyses. This review of the literature used systematic principles in searching CINAHL, Medline and PsycINFO for healthcare research studies which employed a mixed methods approach and were published in the English language between January 1999 and September 2009. In total, 168 studies were included in the results. Most studies originated in the United States of America (USA), the United Kingdom (UK) and Canada. The analytic approach most widely used was parallel data analysis. A number of studies used sequential data analysis; far fewer studies employed concurrent data analysis. Very few of these studies clearly articulated the purpose for using a mixed methods design. The use of the methodological metaphor of triangulation on convergent, complementary, and divergent results from mixed methods studies is exemplified and an example of developing theory from such data is provided. A trend for conducting parallel data analysis on quantitative and qualitative data in mixed methods healthcare research has been identified in the studies included in this review. Using triangulation as a methodological metaphor can facilitate the integration of qualitative and quantitative findings, help researchers to clarify their theoretical propositions and the basis of their results. This can offer a better understanding of the links between theory and

  3. Application of Adjoint Methodology in Various Aspects of Sonic Boom Design

    Science.gov (United States)

    Rallabhandi, Sriram K.

    2014-01-01

    One of the advances in computational design has been the development of adjoint methods allowing efficient calculation of sensitivities in gradient-based shape optimization. This paper discusses two new applications of adjoint methodology that have been developed to aid in sonic boom mitigation exercises. In the first, equivalent area targets are generated using adjoint sensitivities of selected boom metrics. These targets may then be used to drive the vehicle shape during optimization. The second application is the computation of adjoint sensitivities of boom metrics on the ground with respect to parameters such as flight conditions, propagation sampling rate, and selected inputs to the propagation algorithms. These sensitivities enable the designer to make more informed selections of flight conditions at which the chosen cost functionals are less sensitive.

  4. Methodology for the design of Santa Rosa de Cabal sanitary landfill, Risaralda

    International Nuclear Information System (INIS)

    Tabares, J; Orozco, J

    1992-01-01

    In 1987 the Regional Autonomous Corporation of Risaralda, CARDER and the Risaralda Government, they signed a cooperation agreement, in order to endowing from sanitary landfill to the municipalities of the department. In the mark of this agreement it was carried out the design of Santa Rosa's sanitary landfill, that with near 50.000 inhabitants it is constituted in the third city of the department. This city generates some 25 tons/day of garbage that at the present time are heady directly to the waters of San Eugenio River. The present work contains the most important methodological aspects in the design of the sanitary landfill and some comments about the approaches ideal Vs real approaches of selection of places

  5. A hybrid design methodology for structuring an Integrated Environmental Management System (IEMS) for shipping business.

    Science.gov (United States)

    Celik, Metin

    2009-03-01

    The International Safety Management (ISM) Code defines a broad framework for the safe management and operation of merchant ships, maintaining high standards of safety and environmental protection. On the other hand, ISO 14001:2004 provides a generic, worldwide environmental management standard that has been utilized by several industries. Both the ISM Code and ISO 14001:2004 have the practical goal of establishing a sustainable Integrated Environmental Management System (IEMS) for shipping businesses. This paper presents a hybrid design methodology that shows how requirements from both standards can be combined into a single execution scheme. Specifically, the Analytic Hierarchy Process (AHP) and Fuzzy Axiomatic Design (FAD) are used to structure an IEMS for ship management companies. This research provides decision aid to maritime executives in order to enhance the environmental performance in the shipping industry.

  6. Design methodology for a special single winding based bearingless switched reluctance motor

    Directory of Open Access Journals (Sweden)

    Madhurjya Dev Choudhury

    2017-06-01

    Full Text Available Bearingless switched reluctance motors (BSRMs have both magnetic bearing as well as conventional motor characteristics which make them suitable for diverse industrial applications. This study proposes a design methodology for a BSRM in order to calculate the appropriate geometrical dimensions essential for realising a minimum levitation force at every orientation of rotor. It is based on the stator–rotor overlap angle and helps in reducing the complexities associated with the self-bearing operation of a switched reluctance motor (SRM. Different from a conventional SRM, the motor under study deploys a special single set parallel winding scheme for simultaneous production of torque as well as radial force. An analytical model incorporating this single set winding is developed for calculating the torque and the radial force. The proposed bearingless design is verified by developing a two-dimensional finite-element model of a 12/8 SRM in ANSYS Maxwell.

  7. Low activation material design methodology for reduction of radio-active wastes of nuclear power plant

    International Nuclear Information System (INIS)

    Hasegawa, A.; Satou, M.; Nogami, S.; Kakinuma, N.; Kinno, M.; Hayashi, K.

    2007-01-01

    Most of the concrete shielding walls and pipes around a reactor pressure vessel of a light water reactor become low level radioactive waste at decommission phase because they contain radioactive nuclides by thermal-neutron irradiation during its operation. The radioactivity of some low level radioactive wastes is close to the clearance level. It is very desirable in terms of life cycle cost reduction that the radioactivity of those low level radioactive wastes is decreased below clearance level. In case of light water reactors, however, methodology of low activation design of a nuclear plant has not been established yet because the reactor is a large-scale facility and has various structural materials. The Objectives of this work are to develop low activation material design methodology and material fabrication for reduction of radio-active wastes of nuclear power plant such as reinforced concrete. To realize fabrication of reduced radioactive concrete, it is necessary to develop (1) the database of the chemical composition of raw materials to select low activation materials, (2) the tool for calculation of the neutron flux and the spectrum distribution of nuclear plants to evaluate radioactivity of reactor components, (3) optimization of material process conditions to produce the low activation cement and the low activation steels. Results of the data base development, calculation tools and trial production of low activation cements will be presented. (authors)

  8. Comparative analysis study for piping seismic design criteria. Part 1: Methodology and objectives

    International Nuclear Information System (INIS)

    Adams, T.M.; Branch, E.B.; Landers, D.F.; Tagart, S.W. Jr.

    1994-01-01

    As part of the First of a Kind Engineering effort for the Advanced Light Water Reactor the Advanced Reactor Corporation formed a Piping Technical Core Group to develop a set of improved ASME Boiler and Pressure Vessel Code, Section III design rules and approaches for ALWR plant piping and support design. In developing this proposed criteria the Technical Core Group conducted an extensive Comparative Analysis Study of many of the eighteen proposals for new or alternative seismic piping design criteria under consideration by The ASME Code Committee. As part of this comparative study the Technical Core Group also devised a process for determining the relative conservatism of each design criteria studied. In addition a method to relate these relative margins to EPRI/USNRC piping component test margins was developed which allows an assessment of the minimum margin to failure that could be expected from each set of design rules and criteria studied. The study was conducted in two phases and the methodology for each of these phases is presented. Phase 1 was done to develop the relative margins and relate these margins to the actual EPRI/USNRC test data. Phase 2 was done to study the optimized support configurations which could be created using each of the different criteria reviewed. Also, presented in this paper is a discussion of the different criteria selected for study, Analysis Methods/Criteria applied, the piping models for the study, and the specific inputs for the comparative analyses

  9. Methodology and planning for a microprocessor-oriented real time controller design automation system

    Energy Technology Data Exchange (ETDEWEB)

    Matelan, M.N.; Smith, R.J. II

    1976-11-04

    A methodology for reducing the complexity of designing dedicated real-time control systems is developed. It is shown that three areas are amenable to automation: the selection and configuration of hardware, the production of software, and the adaptation of a monitor to maintain real-time integrity of the entire system. The concept of hardware binding is introduced, and it is shown that delaying the point in the design cycle where hardware is functionally bound allows a new approach to machine independence. Concepts which allow expression of repetitive control situations are described, and a realization-independent language (CSDL), based on these concepts, is defined. Methods for automatically selecting a time-wise correct monitor are classified, and techniques for specifying the realization capabilities of digital processors are discussed. These concepts and techniques are brought together in a design automation system for the production of a complete controller design from a behavioral description. An example description is traced through the CSD System; a software listing and hardware configuration document for an actual microprocessor (the Intel 8080) is produced. This research provides a structured description of the control system design process, and allows a unified perspective in the realization of controllers for applications previously considered to be unrelated. The concepts developed define a new direction in the production of real-time control systems. 9 figures, 4 tables.

  10. Modeling and Design Analysis Methodology for Tailoring of Aircraft Structures with Composites

    Science.gov (United States)

    Rehfield, Lawrence W.

    2004-01-01

    Composite materials provide design flexibility in that fiber placement and orientation can be specified and a variety of material forms and manufacturing processes are available. It is possible, therefore, to 'tailor' the structure to a high degree in order to meet specific design requirements in an optimum manner. Common industrial practices, however, have limited the choices designers make. One of the reasons for this is that there is a dearth of conceptual/preliminary design analysis tools specifically devoted to identifying structural concepts for composite airframe structures. Large scale finite element simulations are not suitable for such purposes. The present project has been devoted to creating modeling and design analysis methodology for use in the tailoring process of aircraft structures. Emphasis has been given to creating bend-twist elastic coupling in high aspect ratio wings or other lifting surfaces. The direction of our work was in concert with the overall NASA effort Twenty- First Century Aircraft Technology (TCAT). A multi-disciplinary team was assembled by Dr. Damodar Ambur to work on wing technology, which included our project.

  11. Integrated active and passive control design methodology for the LaRC CSI evolutionary model

    Science.gov (United States)

    Voth, Christopher T.; Richards, Kenneth E., Jr.; Schmitz, Eric; Gehling, Russel N.; Morgenthaler, Daniel R.

    1994-01-01

    A general design methodology to integrate active control with passive damping was demonstrated on the NASA LaRC CSI Evolutionary Model (CEM), a ground testbed for future large, flexible spacecraft. Vibration suppression controllers designed for Line-of Sight (LOS) minimization were successfully implemented on the CEM. A frequency-shaped H2 methodology was developed, allowing the designer to specify the roll-off of the MIMO compensator. A closed loop bandwidth of 4 Hz, including the six rigid body modes and the first three dominant elastic modes of the CEM was achieved. Good agreement was demonstrated between experimental data and analytical predictions for the closed loop frequency response and random tests. Using the Modal Strain Energy (MSE) method, a passive damping treatment consisting of 60 viscoelastically damped struts was designed, fabricated and implemented on the CEM. Damping levels for the targeted modes were more than an order of magnitude larger than for the undamped structure. Using measured loss and stiffness data for the individual damped struts, analytical predictions of the damping levels were very close to the experimental values in the (1-10) Hz frequency range where the open loop model matched the experimental data. An integrated active/passive controller was successfully implemented on the CEM and was evaluated against an active-only controller. A two-fold increase in the effective control bandwidth and further reductions of 30 percent to 50 percent in the LOS RMS outputs were achieved compared to an active-only controller. Superior performance was also obtained compared to a High-Authority/Low-Authority (HAC/LAC) controller.

  12. A robust rotorcraft flight control system design methodology utilizing quantitative feedback theory

    Science.gov (United States)

    Gorder, Peter James

    1993-01-01

    Rotorcraft flight control systems present design challenges which often exceed those associated with fixed-wing aircraft. First, large variations in the response characteristics of the rotorcraft result from the wide range of airspeeds of typical operation (hover to over 100 kts). Second, the assumption of vehicle rigidity often employed in the design of fixed-wing flight control systems is rarely justified in rotorcraft where rotor degrees of freedom can have a significant impact on the system performance and stability. This research was intended to develop a methodology for the design of robust rotorcraft flight control systems. Quantitative Feedback Theory (QFT) was chosen as the basis for the investigation. Quantitative Feedback Theory is a technique which accounts for variability in the dynamic response of the controlled element in the design robust control systems. It was developed to address a Multiple-Input Single-Output (MISO) design problem, and utilizes two degrees of freedom to satisfy the design criteria. Two techniques were examined for extending the QFT MISO technique to the design of a Multiple-Input-Multiple-Output (MIMO) flight control system (FCS) for a UH-60 Black Hawk Helicopter. In the first, a set of MISO systems, mathematically equivalent to the MIMO system, was determined. QFT was applied to each member of the set simultaneously. In the second, the same set of equivalent MISO systems were analyzed sequentially, with closed loop response information from each loop utilized in subsequent MISO designs. The results of each technique were compared, and the advantages of the second, termed Sequential Loop Closure, were clearly evident.

  13. Coupled CFD/CSM vibration design methodology for Generation IV long-life fuel and component design

    International Nuclear Information System (INIS)

    Weber, D.P; Chen, S.S.; Wang, C.Y.; Wei, T.Y.C.; Jansson, S.

    2000-01-01

    Fluid-structure interaction is a cause of failures experienced in fuel rods and is of particular importance for all reactor components in Generation IV reactors which unanimously adopt a pool configuration. A Nuclear Energy Research Initiative (NERI) project proposal has been submitted to United States Department of Energy (USDOE) to develop an advanced design methodology to model fluid-structure interaction, predict its consequences, and guide the design of reactor components. The proposed design methodology is an integrated experimental/theoretical/numerical technique. Preliminary studies have been performed utilizing the CFD code STAR-CD coupled to a first-order structural mechanics model to explore the issues of coupled dynamic fluid/structure interactions - flow field, fluid forces, and instability of tubes - in the cross flow regime. The coupled tool has been used to predict the characteristics of complex dynamic fluid/structure interactions. It includes flow field in the wake of a tube or tube array, motion-dependent fluid forces for a tube, and fluid elastic instability of tube arrays. Specifically, the following calculated quantities have been compared with published experimental data, (a) Flow Field: flow velocity, fluid pressure, and fluid forces (steady and fluctuating components) of steady flow across a circular cylinder at subcritical and critical regions. (b) Fluidelastic Forces: a tube is excited at a given frequency and amplitude. The resulting flow field and fluid forces acting on the tube are calculated. (c) Fluidelastic Instability of a Tube Row: coupled vibration of a tube row is analyzed as a function of flow velocity. Those predicted quantities which have been compared, agree well with experimental data. (author)

  14. The Common Topoi of STEM Discourse: An Apologia and Methodological Proposal, with Pilot Survey

    Science.gov (United States)

    Walsh, Lynda

    2010-01-01

    In this article, the author proposes a methodology for the rhetorical analysis of scientific, technical, mathematical, and engineering (STEM) discourse based on the common topics (topoi) of this discourse. Beginning with work by Miller, Prelli, and other rhetoricians of STEM discourse--but factoring in related studies in cognitive linguistics--she…

  15. Integrated controls-structures design methodology development for a class of flexible spacecraft

    Science.gov (United States)

    Maghami, P. G.; Joshi, S. M.; Walz, J. E.; Armstrong, E. S.

    1990-01-01

    Future utilization of space will require large space structures in low-Earth and geostationary orbits. Example missions include: Earth observation systems, personal communication systems, space science missions, space processing facilities, etc., requiring large antennas, platforms, and solar arrays. The dimensions of such structures will range from a few meters to possibly hundreds of meters. For reducing the cost of construction, launching, and operating (e.g., energy required for reboosting and control), it will be necessary to make the structure as light as possible. However, reducing structural mass tends to increase the flexibility which would make it more difficult to control with the specified precision in attitude and shape. Therefore, there is a need to develop a methodology for designing space structures which are optimal with respect to both structural design and control design. In the current spacecraft design practice, it is customary to first perform the structural design and then the controller design. However, the structural design and the control design problems are substantially coupled and must be considered concurrently in order to obtain a truly optimal spacecraft design. For example, let C denote the set of the 'control' design variables (e.g., controller gains), and L the set of the 'structural' design variables (e.g., member sizes). If a structural member thickness is changed, the dynamics would change which would then change the control law and the actuator mass. That would, in turn, change the structural model. Thus, the sets C and L depend on each other. Future space structures can be roughly divided into four mission classes. Class 1 missions include flexible spacecraft with no articulated appendages which require fine attitude pointing and vibration suppression (e.g., large space antennas). Class 2 missions consist of flexible spacecraft with articulated multiple payloads, where the requirement is to fine-point the spacecraft and each

  16. Skin microbiome surveys are strongly influenced by experimental design

    Science.gov (United States)

    Meisel, Jacquelyn S.; Hannigan, Geoffrey D.; Tyldsley, Amanda S.; SanMiguel, Adam J.; Hodkinson, Brendan P.; Zheng, Qi; Grice, Elizabeth A.

    2016-01-01

    Culture-independent studies to characterize skin microbiota are increasingly common, due in part to affordable and accessible sequencing and analysis platforms. Compared to culture-based techniques, DNA sequencing of the bacterial 16S ribosomal RNA (rRNA) gene or whole metagenome shotgun (WMS) sequencing provide more precise microbial community characterizations. Most widely used protocols were developed to characterize microbiota of other habitats (i.e. gastrointestinal), and have not been systematically compared for their utility in skin microbiome surveys. Here we establish a resource for the cutaneous research community to guide experimental design in characterizing skin microbiota. We compare two widely sequenced regions of the 16S rRNA gene to WMS sequencing for recapitulating skin microbiome community composition, diversity, and genetic functional enrichment. We show that WMS sequencing most accurately recapitulates microbial communities, but sequencing of hypervariable regions 1-3 of the 16S rRNA gene provides highly similar results. Sequencing of hypervariable region 4 poorly captures skin commensal microbiota, especially Propionibacterium. WMS sequencing, which is resource- and cost-intensive, provides evidence of a community’s functional potential; however, metagenome predictions based on 16S rRNA sequence tags closely approximate WMS genetic functional profiles. This work highlights the importance of experimental design for downstream results in skin microbiome surveys. PMID:26829039

  17. Simulation and curriculum design: a global survey in dental education.

    Science.gov (United States)

    Perry, S; Burrow, M F; Leung, W K; Bridges, S M

    2017-12-01

    Curriculum reforms are being driven by globalization and international standardization. Although new information technologies such as dental haptic virtual reality (VR) simulation systems have provided potential new possibilities for clinical learning in dental curricula, infusion into curricula requires careful planning. This study aimed to identify current patterns in the role and integration of simulation in dental degree curricula internationally. An original internet survey was distributed by invitation to clinical curriculum leaders in dental schools in Asia, Europe, North America, and Oceania (Australia and New Zealand). The results (N = 62) showed Asia, Europe and Oceania tended towards integrated curriculum designs with North America having a higher proportion of traditional curricula. North America had limited implementation of haptic VR simulation technology but reported the highest number of scheduled simulation hours. Australia and New Zealand were the most likely regions to incorporate haptic VR simulation technology. This survey indicated considerable variation in curriculum structure with regionally-specific preferences being evident in terms of curriculum structure, teaching philosophies and motivation for incorporation of VR haptic simulation into curricula. This study illustrates the need for an improved evidence base on dental simulations to inform curriculum designs and psychomotor skill learning in dentistry. © 2017 Australian Dental Association.

  18. The Influence of Survey Methodology in Estimating Prevalence Rates of Childhood Sexual Abuse Among Navy Recruits

    National Research Council Canada - National Science Library

    Olson, Cheryl B; Stander, Valerie A; Merril, Lex L

    2000-01-01

    ...% of the participants self-defined themselves as abused. Despite these differences in abuse rates, data from the SHIP survey, from SRB operational definitions, and from SRB self-definitions all independently accounted for variability in participants...

  19. Oman World Health Survey: Part 1 - Methodology, Sociodemographic Profile and Epidemiology of Non-Communicable Diseases in Oman

    OpenAIRE

    Al Riyami, Asya; Elaty, Mahmoud Attia Abd; Morsi, Magdi; Al Kharusi, Hilal; Al Shukaily, Waleed; Jaju, Sanjay

    2012-01-01

    The Oman World Health Survey (OWHS) is community-based household survey conducted in first half of 2008 for Omani and non-Omani population aged 18 years and above. It is a part of the World Health Survey (WHS) series which was developed by the World Health Organization (WHO) as a means to compile comprehensive information on the health of populations in different countries. A multi-stage stratified cluster sampling was designed to select about 5000 eligible subjects 18 years and above. The ma...

  20. Environmental and production survey methodology to estimate severity and extent of aquaculture impact in three areas of the Philippines

    Directory of Open Access Journals (Sweden)

    Rune Palerud

    2008-12-01

    Full Text Available The project “Environmental Monitoring and Modelling of Aquaculture in the Philippines” known as EMMA, was undertaken by the National Integrated Fisheries Technology Development Centre (NIFTDC of the Bureau of Fisheries and Aquatic Resources (BFAR and Akvaplan-niva AS of Tromsø, Norway. The project was funded by the Norwegian Agency for Development Cooperation (NORAD. This project tested survey equipment for the monitoring of aquaculture impact to the water column and sediment. Baseline surveys were undertaken as the goal of the study was to develop suitable aquaculture monitoring techniques and adapt predictive models to assist in identifying risk areas for aquaculture and allow planned development of sustainable aquaculture. Three different locations were chosen as case studies - Bolinao, Pangasinan (marine site, Dagupan (brackish water site, and Taal Lake (freshwater site. Production surveys were also undertaken to estimate production and nutrient outputs to the water bodies in order to be able to link aquaculture production with severity and extent of impacts. Different methodologies for the estimation of production were tested to find a cost effective and accurate methodology.

  1. DEVELOPMENT OF METHODOLOGY FOR DESIGNING TESTABLE COMPONENT STRUCTURE OF DISCIPLINARY COMPETENCE

    Directory of Open Access Journals (Sweden)

    Vladimir I. Freyman

    2014-01-01

    Full Text Available The aim of the study is to present new methods of quality results assessment of the education corresponding to requirements of Federal State Educational Standards (FSES of the Third Generation developed for the higher school. The urgency of search of adequate tools for quality competency measurement and its elements formed in the course of experts’ preparation are specified. Methods. It is necessary to consider interference of competency components such as knowledge, abilities, possession in order to make procedures of assessment of students’ achievements within the limits of separate discipline or curriculum section more convenient, effective and exact. While modeling of component structure of the disciplinary competence the testable design of components is used; the approach borrowed from technical diagnostics. Results. The research outcomes include the definition and analysis of general iterative methodology for testable designing component structure of the disciplinary competence. Application of the proposed methodology is illustrated as the example of an abstract academic discipline with specified data and index of labour requirement. Methodology restrictions are noted; practical recommendations are given. Scientific novelty. Basic data and a detailed step-by-step implementation phase of the proposed common iterative approach to the development of disciplinary competence testable component structure are considered. Tests and diagnostic tables for different options of designing are proposed. Practical significance. The research findings can help promoting learning efficiency increase, a choice of adequate control devices, accuracy of assessment, and also efficient use of personnel, temporal and material resources of higher education institutions. Proposed algorithms, methods and approaches to procedure of control results organization and realization of developed competences and its components can be used as methodical base while

  2. Life-cycle energy optimisation : A proposed methodology for integrating environmental considerations early in the vehicle engineering design process

    OpenAIRE

    O'Reilly, Ciarán J.; Göransson, Peter; Funazaki, Atsushi; Suzuki, Tetsuya; Edlund, Stefan; Gunnarsson, Cecilia; Lundow, Jan-Olov; Cerin, Pontus; Cameron, Christopher J.; Wennhage, Per; Potting, José

    2016-01-01

    To enable the consideration of life cycle environmental impacts in the early stages of vehicle design, a methodology using the proxy of life cycle energy is proposed in this paper. The trade-offs in energy between vehicle production, operational performance and end-of-life are formulated as a mathematical problem, and simultaneously balanced with other transport-related functionalities, and may be optimised. The methodology is illustrated through an example design study, which is deliberately...

  3. The capture and dissemination of integrated 3D geospatial knowledge at the British Geological Survey using GSI3D software and methodology

    Science.gov (United States)

    Kessler, Holger; Mathers, Steve; Sobisch, Hans-Georg

    2009-06-01

    The Geological Surveying and Investigation in 3 Dimensions (GSI3D) software tool and methodology has been developed over the last 15 years. Since 2001 this has been in cooperation with the British Geological Survey (BGS). To-date over a hundred BGS geologists have learned to use the software that is now routinely deployed in building systematic and commercial 3D geological models. The success of the GSI3D methodology and software is based on its intuitive design and the fact that it utilises exactly the same data and methods, albeit in digital forms, that geologists have been using for two centuries in order to make geological maps and cross-sections. The geologist constructs models based on a career of observation of geological phenomena, thereby incorporating tacit knowledge into the model. This knowledge capture is a key element to the GSI3D approach. In BGS GSI3D is part of a much wider set of systems and work processes that together make up the cyberinfrastructure of a modern geological survey. The GSI3D software is not yet designed to cope with bedrock structures in which individual stratigraphic surfaces are repeated or inverted, but the software is currently being extended by BGS to encompass these more complex geological scenarios. A further challenge for BGS is to enable its 3D geological models to become part of the semantic Web using GML application schema like GeoSciML. The biggest benefits of widely available systematic geological models will be an enhanced public understanding of the sub-surface in 3D, and the teaching of geoscience students.

  4. A design methodology for domain-optimized power-efficient supercomputing

    Energy Technology Data Exchange (ETDEWEB)

    Mohiyuddin, Marghoob [Univ. of California, Berkeley, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Murphy, Mark [Univ. of California, Berkeley, CA (United States); Oliker, Leonid [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shalf, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wawrzynek, John [Univ. of California, Berkeley, CA (United States); Williams, Samuel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2009-01-01

    As power has become the pre-eminent design constraint for future HPC systems, computational efficiency is being emphasized over simply peak performance. Recently, static benchmark codes have been used to find a power efficient architecture. Unfortunately, because compilers generate sub-optimal code, benchmark performance can be a poor indicator of the performance potential of architecture design points. Therefore, we present hardware/software cotuning as a novel approach for system design, in which traditional architecture space exploration is tightly coupled with software auto-tuning for delivering substantial improvements in area and power efficiency. We demonstrate the proposed methodology by exploring the parameter space of a Tensilica-based multi-processor running three of the most heavily used kernels in scientific computing, each with widely varying micro-architectural requirements: sparse matrix vector multiplication, stencil-based computations, and general matrix-matrix multiplication. Results demonstrate that co-tuning significantly improves hardware area and energy efficiency - a key driver for next generation of HPC system design.

  5. Safety methodology implementation in the conceptual design phase of a fusion reactor

    International Nuclear Information System (INIS)

    Rodriguez-Rodrigo, L.; Elbez-Uzan, J.

    2007-01-01

    The licensing of ITER in France represents the first process for licensing a fusion facility in the framework of an experimental device with a total Tritium inventory of 3 kg. The main ITER parameters are far from those expected in the future demonstration reactors where the fusion power will be at least 5 times higher and the additional heating power could also reach up to 5 times the one foreseen in ITER. Main safety requirements for these reactors are based, among other conditions, on their inherent features as low amount of fuel, very low impurity content of structural materials, minimum waste repository, no active systems for safe shut-down, and no need for evacuation of population after the most severe accident. The design of such reactors is at the stage of conceptual studies and is mainly dealing with plasma performances, tritium breeding, blanket/divertor designs and solution of engineering issues, as well as bounding accidents or classification of waste. The methodological approach for integrating safety analysis as a tool for optimizing the design of the overall fusion installation for future reactors in the conceptual design phase is sketched, including the machine itself and the different auxiliary nuclear buildings. (author)

  6. Nurse Forecasting in Europe (RN4CAST): Rationale, design and methodology

    LENUS (Irish Health Repository)

    Sermeus, Walter

    2011-04-18

    Abstract Background Current human resources planning models in nursing are unreliable and ineffective as they consider volumes, but ignore effects on quality in patient care. The project RN4CAST aims innovative forecasting methods by addressing not only volumes, but quality of nursing staff as well as quality of patient care. Methods\\/Design A multi-country, multilevel cross-sectional design is used to obtain important unmeasured factors in forecasting models including how features of hospital work environments impact on nurse recruitment, retention and patient outcomes. In each of the 12 participating European countries, at least 30 general acute hospitals were sampled. Data are gathered via four data sources (nurse, patient and organizational surveys and via routinely collected hospital discharge data). All staff nurses of a random selection of medical and surgical units (at least 2 per hospital) were surveyed. The nurse survey has the purpose to measure the experiences of nurses on their job (e.g. job satisfaction, burnout) as well as to allow the creation of aggregated hospital level measures of staffing and working conditions. The patient survey is organized in a sub-sample of countries and hospitals using a one-day census approach to measure the patient experiences with medical and nursing care. In addition to conducting a patient survey, hospital discharge abstract datasets will be used to calculate additional patient outcomes like in-hospital mortality and failure-to-rescue. Via the organizational survey, information about the organizational profile (e.g. bed size, types of technology available, teaching status) is collected to control the analyses for institutional differences. This information will be linked via common identifiers and the relationships between different aspects of the nursing work environment and patient and nurse outcomes will be studied by using multilevel regression type analyses. These results will be used to simulate the impact of

  7. Nurse forecasting in Europe (RN4CAST: Rationale, design and methodology

    Directory of Open Access Journals (Sweden)

    Brzostek Tomasz

    2011-04-01

    Full Text Available Abstract Background Current human resources planning models in nursing are unreliable and ineffective as they consider volumes, but ignore effects on quality in patient care. The project RN4CAST aims innovative forecasting methods by addressing not only volumes, but quality of nursing staff as well as quality of patient care. Methods/Design A multi-country, multilevel cross-sectional design is used to obtain important unmeasured factors in forecasting models including how features of hospital work environments impact on nurse recruitment, retention and patient outcomes. In each of the 12 participating European countries, at least 30 general acute hospitals were sampled. Data are gathered via four data sources (nurse, patient and organizational surveys and via routinely collected hospital discharge data. All staff nurses of a random selection of medical and surgical units (at least 2 per hospital were surveyed. The nurse survey has the purpose to measure the experiences of nurses on their job (e.g. job satisfaction, burnout as well as to allow the creation of aggregated hospital level measures of staffing and working conditions. The patient survey is organized in a sub-sample of countries and hospitals using a one-day census approach to measure the patient experiences with medical and nursing care. In addition to conducting a patient survey, hospital discharge abstract datasets will be used to calculate additional patient outcomes like in-hospital mortality and failure-to-rescue. Via the organizational survey, information about the organizational profile (e.g. bed size, types of technology available, teaching status is collected to control the analyses for institutional differences. This information will be linked via common identifiers and the relationships between different aspects of the nursing work environment and patient and nurse outcomes will be studied by using multilevel regression type analyses. These results will be used to simulate

  8. Are parental leaves considered as work interruptions by survey respondents? A methodological note

    Directory of Open Access Journals (Sweden)

    Céline Le Bourdais

    2012-01-01

    Full Text Available Parental leaves and family-related work interruptions are linked to a variety of issues, such as children’s well-being or women’s work trajectories. Yet, the measurement of periods of absence from the labour market might be imprecise, especially in retrospective surveys. To evaluate the quality of the collected information, we examine whether women who reported taking a parental leave longer than six months also mentioned a corresponding work interruption, using the 2008 Living in Canada Survey (LCS – Pilot. Our analysis shows that nearly half of women failed to do so. We investigate the sources of the discrepancy and suggest possible avenues of change for future surveys.

  9. The Influence of the Design of Web Survey Questionnaires on the Quality of Responses

    Directory of Open Access Journals (Sweden)

    Stéphane Ganassali

    2008-03-01

    Full Text Available he first objective of this article is to propose a conceptual framework of the effects of on-line questionnaire design on the quality of collected responses. Secondly, we present the results of an experiment where different protocols have been tested and compared in a randomised design using the basis of several quality indexes. Starting from some previous categorizations, and from the main factors identified in the literature, we first propose an initial global framework of the questionnaire and question characteristics in a web survey, divided into five groups of factors. Our framework was built to follow the response process successive stages of the contact between the respondent and the questionnaire itself. Then, because it has been studied in the survey methodology literature in a very restricted way, the concept of `response quality' is discussed and extended with some more `qualitative' criteria that could be helpful for researchers and practitioners, in order to obtain a deeper assessment of the survey output. As an experiment, on the basis of the factors chosen as major characteristics of the questionnaire design, eight versions of a questionnaire related to young people's consumption patterns were created. The links to these on-line questionnaires were sent in November 2005 to a target of 10,000 young people. The article finally presents the results of our study and discusses the conclusions. Very interesting results come to light; especially regarding the influence of length, interaction and question wording dimensions on response quality. We discuss the effects of Web-questionnaire design characteristics on the quality of data.

  10. A methodology for the efficient integration of transient constraints in the design of aircraft dynamic systems

    Science.gov (United States)

    Phan, Leon L.

    The motivation behind this thesis mainly stems from previous work performed at Hispano-Suiza (Safran Group) in the context of the European research project "Power Optimised Aircraft". Extensive testing on the COPPER Bird RTM, a test rig designed to characterize aircraft electrical networks, demonstrated the relevance of transient regimes in the design and development of dynamic systems. Transient regimes experienced by dynamic systems may have severe impacts on the operation of the aircraft. For example, the switching on of a high electrical load might cause a network voltage drop inducing a loss of power available to critical aircraft systems. These transient behaviors are thus often regulated by dynamic constraints, requiring the dynamic signals to remain within bounds whose values vary with time. The verification of these peculiar types of constraints, which generally requires high-fidelity time-domain simulation, intervenes late in the system development process, thus potentially causing costly design iterations. The research objective of this thesis is to develop a methodology that integrates the verification of dynamic constraints in the early specification of dynamic systems. In order to circumvent the inefficiencies of time-domain simulation, multivariate dynamic surrogate models of the original time-domain simulation models are generated, building on a nonlinear system identification technique using wavelet neural networks (or wavenets), which allow the multiscale nature of transient signals to be captured. However, training multivariate wavenets can become computationally prohibitive as the number of design variables increases. Therefore, an alternate approach is formulated, in which dynamic surrogate models using sigmoid-based neural networks are used to emulate the transient behavior of the envelopes of the time-domain response. Thus, in order to train the neural network, the envelopes are extracted by first separating the scales of the dynamic response

  11. Damage Equivalent Test Methodologies as Design Elements for Journal Bearing Systems

    Directory of Open Access Journals (Sweden)

    Florian Summer

    2017-12-01

    Full Text Available The current paper addresses the field of experimental research of journal bearing systems. In this regard, the challenges are dealt with concerning simultaneous testing with a close correlation to the industrial application and with a high resolution of tribological processes. Concerning this aspect, two damage equivalent laboratory test methodologies for journal slide bearing systems are presented, and their ability to visualize certain performance parameters of bearing systems are emphasized (for instance friction performance, (start stop wear processes, and seizure events. The results clearly emphasize that the applied methodologies provide accurate findings regarding specific effects of selective parameters/changes on the performance of bearing systems, such as polymer overlays may result in improved mixed friction sliding conditions if designed properly, and they provide superior start stop wear resistance; the use of specific corrosion inhibitors can successfully prevent tribo-corrosion on bronze bearings; a decrease of oil viscosity increases solid friction share but decreases fluid friction; lubricant anti-wear additives are able to improve seizure resistance and sliding properties of bearing systems depending on formulation harmonization; and novel bearing material coatings, e.g., sputtered SnCu, can significantly improve emergency running capabilities.

  12. Methodology for the nuclear design validation of an Alternate Emergency Management Centre (CAGE)

    International Nuclear Information System (INIS)

    Hueso, C.; De La Fuente, C.; Janes, A.; Massuet, J.; Zamora, I.; Fabbri, M.; Gasca, C.; Hernandez, H.; Angel Vega, J.

    2017-01-01

    As a consequence of the Fukushima accident, Spanish nuclear authorities have decided to equip each nuclear power plant with an Alternate Emergency Management Centre (CAGE) that will manage safely any emergency occurring on the site. The living conditions of the occupants of the CAGE in the event of a Severe Accident imply that TEDE (Total Effective Dose Equivalent) must be<50 mSv and the equivalent dose to the thyroid<500 mSv within 30 days following the accident. This paper presents the methodology followed to design CAGE in order to comply with above dose limits. The study of weather conditions as part of the data of the site will determine the relative concentrations of radionuclides in the air using ARCON96. The activity in the air is characterized depending on the source and release sequence specified in NUREG-1465 by RADTRAD code, which provides results of the inner cloud source term contribution. Known activities and energy spectra are inferred using ORIGEN-S, which are used as input for the models of the outer cloud, filters and containment generated with MCNP5. The sum of the different contributions must be below radiation dose limits. The radiation dose is optimized by varying parameters including CAGE location on the plant site, flow filtering need for recirculation, thicknesses and compositions of the walls, etc. The calculation codes selected for the development of this methodology are widely available, internationally used and validated in many studies

  13. Probability sampling design in ethnobotanical surveys of medicinal plants

    Directory of Open Access Journals (Sweden)

    Mariano Martinez Espinosa

    2012-12-01

    Full Text Available Non-probability sampling design can be used in ethnobotanical surveys of medicinal plants. However, this method does not allow statistical inferences to be made from the data generated. The aim of this paper is to present a probability sampling design that is applicable in ethnobotanical studies of medicinal plants. The sampling design employed in the research titled "Ethnobotanical knowledge of medicinal plants used by traditional communities of Nossa Senhora Aparecida do Chumbo district (NSACD, Poconé, Mato Grosso, Brazil" was used as a case study. Probability sampling methods (simple random and stratified sampling were used in this study. In order to determine the sample size, the following data were considered: population size (N of 1179 families; confidence coefficient, 95%; sample error (d, 0.05; and a proportion (p, 0.5. The application of this sampling method resulted in a sample size (n of at least 290 families in the district. The present study concludes that probability sampling methods necessarily have to be employed in ethnobotanical studies of medicinal plants, particularly where statistical inferences have to be made using data obtained. This can be achieved by applying different existing probability sampling methods, or better still, a combination of such methods.

  14. Probability sampling design in ethnobotanical surveys of medicinal plants

    Directory of Open Access Journals (Sweden)

    Mariano Martinez Espinosa

    2012-07-01

    Full Text Available Non-probability sampling design can be used in ethnobotanical surveys of medicinal plants. However, this method does not allow statistical inferences to be made from the data generated. The aim of this paper is to present a probability sampling design that is applicable in ethnobotanical studies of medicinal plants. The sampling design employed in the research titled "Ethnobotanical knowledge of medicinal plants used by traditional communities of Nossa Senhora Aparecida do Chumbo district (NSACD, Poconé, Mato Grosso, Brazil" was used as a case study. Probability sampling methods (simple random and stratified sampling were used in this study. In order to determine the sample size, the following data were considered: population size (N of 1179 families; confidence coefficient, 95%; sample error (d, 0.05; and a proportion (p, 0.5. The application of this sampling method resulted in a sample size (n of at least 290 families in the district. The present study concludes that probability sampling methods necessarily have to be employed in ethnobotanical studies of medicinal plants, particularly where statistical inferences have to be made using data obtained. This can be achieved by applying different existing probability sampling methods, or better still, a combination of such methods.

  15. A review of methodology and analysis of nutrition and mortality surveys conducted in humanitarian emergencies from October 1993 to April 2004

    Directory of Open Access Journals (Sweden)

    Spiegel Paul B

    2007-06-01

    Full Text Available Abstract Background Malnutrition prevalence and mortality rates are increasingly used as essential indicators to assess the severity of a crisis, to follow trends, and to guide decision-making, including allocation of funds. Although consensus has slowly developed on the methodology to accurately measure these indicators, errors in the application of the survey methodology and analysis have persisted. The aim of this study was to identify common methodological weaknesses in nutrition and mortality surveys and to provide practical recommendations for improvement. Methods Nutrition (N = 368 and crude mortality rate (CMR; N = 158 surveys conducted by 33 non-governmental organisations and United Nations agencies in 17 countries from October 1993 to April 2004 were analysed for sampling validity, precision, quality of measurement and calculation according to several criteria. Results One hundred and thirty (35.3% nutrition surveys and 5 (3.2% CMR surveys met the criteria for quality. Quality of surveys varied significantly depending on the agency. The proportion of nutrition surveys that met criteria for quality rose significantly from 1993 to 2004; there was no improvement for mortality surveys during this period. Conclusion Significant errors and imprecision in the methodology and reporting of nutrition and mortality surveys were identified. While there was an improvement in the quality of nutrition surveys over the years, the quality of mortality surveys remained poor. Recent initiatives aimed at standardising nutrition and mortality survey quality should be strengthened. There are still a number of methodological issues in nutrition and mortality surveys in humanitarian emergencies that need further study.

  16. Methodology of sensitive planning and design of stormwater drainage system on urban watersheds

    Directory of Open Access Journals (Sweden)

    Milićević Dragan B.

    2017-01-01

    Full Text Available For sustainable stormwater management planning in urban areas a hierarchical approach is needed, from planning on the watershed level, to the implementation on the location level, so a comprehensive approach to planning and designing the improvement of stormwater drainage could be provided with a goal of developing a drainage system, which balances the goals of drainage efficiency maximization and minimizing the negative effects on the environment. But the watershed level, which is relevant to urban hydrology, is almost always ignored while developing stormwater management plans. This paper shows a methodology oriented towards studying of the morphology of the urban watershed in the context of sustainable stormwater management, which consist of five steps and intends to help city planners and engineers choose the right location and make a selection of the best stormwater management practices when defining a sustainable decentralized stormwater management plan.

  17. The application of experimental design methodology for the investigation of liquid radioactive waste treatment

    Directory of Open Access Journals (Sweden)

    Šljivić-Ivanović Marija Z.

    2017-01-01

    Full Text Available The sorption properties of waste facade, brick, and asphalt sample towards Sr(II, Co(II, and Ni(II ions from single and multicomponent solutions were investigated. The highest sorption capacity was found for Ni(II ions, while the most effective sorbent was facade. Simplex Centroid Mixture Design was used in order to investigate the sorption processes of ions from solutions with different composition as well as the competition between the cations. Based on the statistical analysis results, the equations for data modeling were proposed. According to the observations, the investigated solid matrices can be effectively used for the liquid radioactive waste treatment. Furthermore, the applied methodology turned out to be an easy and operational way for the investigations of multicomponent sorption processes. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. III 43009 and Grant no. OI 171007

  18. Design methodology for intelligent technical systems develop intelligent technical systems of the future

    CERN Document Server

    Rammig, Franz; Schäfer, Wilhelm

    2014-01-01

    Intelligent technical systems, which combine mechanical, electrical and software engineering with control engineering and advanced mathematics, go far beyond the state of the art in mechatronics and open up fascinating perspectives. Among these systems are so-called self-optimizing systems, which are able to adapt their behavior autonomously and flexibly to changing operating conditions. Self-optimizing systems create high value for example in terms of energy and resource efficiency as well as reliability.   The Collaborative Research Center 614 "Self-optimizing Concepts and Structures in Mechanical Engineering" pursued the long-term aim to open up the active paradigm of self-optimization for mechanical engineering and to enable others to develop self-optimizing systems.   This book is directed to researchers and practitioners alike. It provides a design methodology for the development of self-optimizing systems consisting of a reference process, methods, and tools. The reference process is divided into two...

  19. Quality at the source (QATS) system design under six sigma methodology

    International Nuclear Information System (INIS)

    Aguirre, F.; Ballasteros, I.; Maricalva, J.

    2000-01-01

    One of the main objectives in the manufacturing of fuel assemblies, is to fulfill the customer expectations with a product that assures its reliability during its stay in the NPP. By mean of the QATS System design under 6-Sigma methodology, all the customer requirements are included in the product specifications and drawings. Product characteristics and process variables are classified and process capability is evaluated. All this information permits to identify CTQ's (Critical to Quality) product characteristics and process variables, and to define a quality system (QATS) based in the process and on-line characteristics control handled by the manufacturing workers. At the end, this system ensures a continuous product quality improvement, and a strong commitment with the customer requirements. (author)

  20. Harriet Martineau and Her Contemporaries: Past Studies and Methodological Questions on Historical Surveys of Women.

    Science.gov (United States)

    Weiner, Gaby

    2000-01-01

    Presents the results of a historical survey of the contemporaries of Harriet Martineau who were born in the United Kingdom between 1792 and 1812. Focuses on the length of life, marital status, number of children, women's occupations, husbands' occupations (of married women), and fathers' occupations (of unmarried women). (CMK)

  1. Methodological considerations concerning the development of oral dental erosion indexes: literature survey, validity and reliability

    DEFF Research Database (Denmark)

    Berg-Beckhoff, Gabriele; Kutschmann, Marcus; Bardehle, Doris

    2008-01-01

    . Therefore, within a revision of the WHO Oral Health Surveys Basic Methods, new oral disease patterns, e.g. dental erosion, have to be taken into account. Within the last 20 years, many studies on dental erosion have been carried out and published. There has been a rapid growth in the number of indexes...

  2. A novel integrated framework and improved methodology of computer-aided drug design.

    Science.gov (United States)

    Chen, Calvin Yu-Chian

    2013-01-01

    Computer-aided drug design (CADD) is a critical initiating step of drug development, but a single model capable of covering all designing aspects remains to be elucidated. Hence, we developed a drug design modeling framework that integrates multiple approaches, including machine learning based quantitative structure-activity relationship (QSAR) analysis, 3D-QSAR, Bayesian network, pharmacophore modeling, and structure-based docking algorithm. Restrictions for each model were defined for improved individual and overall accuracy. An integration method was applied to join the results from each model to minimize bias and errors. In addition, the integrated model adopts both static and dynamic analysis to validate the intermolecular stabilities of the receptor-ligand conformation. The proposed protocol was applied to identifying HER2 inhibitors from traditional Chinese medicine (TCM) as an example for validating our new protocol. Eight potent leads were identified from six TCM sources. A joint validation system comprised of comparative molecular field analysis, comparative molecular similarity indices analysis, and molecular dynamics simulation further characterized the candidates into three potential binding conformations and validated the binding stability of each protein-ligand complex. The ligand pathway was also performed to predict the ligand "in" and "exit" from the binding site. In summary, we propose a novel systematic CADD methodology for the identification, analysis, and characterization of drug-like candidates.

  3. [Principles and methodology for ecological rehabilitation and security pattern design in key project construction].

    Science.gov (United States)

    Chen, Li-Ding; Lu, Yi-He; Tian, Hui-Ying; Shi, Qian

    2007-03-01

    Global ecological security becomes increasingly important with the intensive human activities. The function of ecological security is influenced by human activities, and in return, the efficiency of human activities will also be affected by the patterns of regional ecological security. Since the 1990s, China has initiated the construction of key projects "Yangtze Three Gorges Dam", "Qinghai-Tibet Railway", "West-to-East Gas Pipeline", "West-to-East Electricity Transmission" and "South-to-North Water Transfer" , etc. The interaction between these projects and regional ecological security has particularly attracted the attention of Chinese government. It is not only important for the regional environmental protection, but also of significance for the smoothly implementation of various projects aimed to develop an ecological rehabilitation system and to design a regional ecological security pattern. This paper made a systematic analysis on the types and characteristics of key project construction and their effects on the environment, and on the basis of this, brought forward the basic principles and methodology for ecological rehabilitation and security pattern design in this construction. It was considered that the following issues should be addressed in the implementation of a key project: 1) analysis and evaluation of current regional ecological environment, 2) evaluation of anthropogenic disturbances and their ecological risk, 3) regional ecological rehabilitation and security pattern design, 4) scenario analysis of environmental benefits of regional ecological security pattern, 5) re-optimization of regional ecological system framework, and 6) establishment of regional ecosystem management plan.

  4. Systematic probabilistic design methodology for simultaneously optimizing the ship hull–propeller system

    Directory of Open Access Journals (Sweden)

    Ehsan Esmailian

    2017-05-01

    Full Text Available The proposed design methodology represents a new approach to optimize the propeller–hull system simultaneously. In this paper, two objective functions are considered, the first objective function is Lifetime Fuel Consumption (LFC and the other one is cost function including thrust, torque, open water and skew efficiencies. The variables of the propeller geometries (Z, EAR, P/D and D and ship hull parameters (L/B, B/T, T and CB are considered to be optimized with cavitation, blades stress of propeller. The well-known evolutionary algorithm based on NSGA-II is employed to optimize a multi-objective problem, where the main propeller and hull dimensions are considered as design variables. The results are presented for a series 60 ship with B-series propeller. The results showed that the proposed method is an appropriate and effective approach for simultaneously propeller–hull system design and is able to minimize both of the objective functions significantly.

  5. Research Activities on Development of Piping Design Methodology of High Temperature Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Nam-Su [Seoul National Univ. of Science and Technology, Seoul(Korea, Republic of); Won, Min-Gu [Sungkyukwan Univ., Suwon (Korea, Republic of); Oh, Young-Jin [KEPCO Engineering and Construction Co. Inc., Gimcheon (Korea, Republic of); Lee, Hyeog-Yeon; Kim, Yoo-Gon [Korea Atomic Energy Research Institute, Daejeon(Korea, Republic of)

    2016-10-15

    A SFR is operated at high temperature and low pressure compared with commercial pressurized water reactor (PWR), and such an operating condition leads to time-dependent damages such as creep rupture, excessive creep deformation, creep-fatigue interaction and creep crack growth. Thus, high temperature design and structural integrity assessment methodology should be developed considering such failure mechanisms. In terms of design of mechanical components of SFR, ASME B and PV Code, Sec. III, Div. 5 and RCC-MRx provide high temperature design and assessment procedures for nuclear structural components operated at high temperature, and a Leak-Before-Break (LBB) assessment procedure for high temperature piping is also provided in RCC-MRx, A16. Three web-based evaluation programs based on the current high temperature codes were developed for structural components of high temperature reactors. Moreover, for the detailed LBB analyses of high temperature piping, new engineering methods for predicting creep C*-integral and creep COD rate based either on GE/EPRI or on reference stress concepts were proposed. Finally, the numerical methods based on Garofalo's model and RCC-MRx have been developed, and they have been implemented into ABAQUS. The predictions based on both models were compared with the experimental results, and it has been revealed that the predictions from Garafalo's model gave somewhat successful results to describe the deformation behavior of Gr. 91 at elevated temperatures.

  6. Responsive survey design, demographic data collection, and models of demographic behavior.

    Science.gov (United States)

    Axinn, William G; Link, Cynthia F; Groves, Robert M

    2011-08-01

    To address declining response rates and rising data-collection costs, survey methodologists have devised new techniques for using process data ("paradata") to address nonresponse by altering the survey design dynamically during data collection. We investigate the substantive consequences of responsive survey design-tools that use paradata to improve the representative qualities of surveys and control costs. By improving representation of reluctant respondents, responsive design can change our understanding of the topic being studied. Using the National Survey of Family Growth Cycle 6, we illustrate how responsive survey design can shape both demographic estimates and models of demographic behaviors based on survey data. By juxtaposing measures from regular and responsive data collection phases, we document how special efforts to interview reluctant respondents may affect demographic estimates. Results demonstrate the potential of responsive survey design to change the quality of demographic research based on survey data.

  7. The 2003 Australian Breast Health Survey: survey design and preliminary results

    Directory of Open Access Journals (Sweden)

    Favelle Simone

    2008-01-01

    Full Text Available Abstract Background The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. Methods The 2003 BHS surveyed English-speaking Australian women aged 30–69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Results Of the 3,144 respondents who consented to being interviewed, 138 (4.4% had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1% reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9% had heard of the BreastScreen Australia (BSA program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. Conclusion The

  8. The EuroPrevall surveys on the prevalence of food allergies in children and adults: background and study methodology

    NARCIS (Netherlands)

    Kummeling, I.; Mills, E. N. C.; Clausen, M.; Dubakiene, R.; Pérez, C. Farnãndez; Fernández-Rivas, M.; Knulst, A. C.; Kowalski, M. L.; Lidholm, J.; Le, T.-M.; Metzler, C.; Mustakov, T.; Popov, T.; Potts, J.; van Ree, R.; Sakellariou, A.; Töndury, B.; Tzannis, K.; Burney, P.

    2009-01-01

    Background: The epidemiological surveys in children and adults of the EU-funded multidisciplinary Integrated Project EuroPrevall, launched in June 2005, were designed to estimate the currently unknown prevalence of food allergy and exposure to known or suspected risk factors for food allergy across

  9. Application of hazard analysis and critical control point methodology and risk-based grading to consumer food safety surveys.

    Science.gov (United States)

    Røssvoll, Elin Halbach; Ueland, Øydis; Hagtvedt, Therese; Jacobsen, Eivind; Lavik, Randi; Langsrud, Solveig

    2012-09-01

    Traditionally, consumer food safety survey responses have been classified as either "right" or "wrong" and food handling practices that are associated with high risk of infection have been treated in the same way as practices with lower risks. In this study, a risk-based method for consumer food safety surveys has been developed, and HACCP (hazard analysis and critical control point) methodology was used for selecting relevant questions. We conducted a nationally representative Web-based survey (n = 2,008), and to fit the self-reported answers we adjusted a risk-based grading system originally developed for observational studies. The results of the survey were analyzed both with the traditional "right" and "wrong" classification and with the risk-based grading system. The results using the two methods were very different. Only 5 of the 10 most frequent food handling violations were among the 10 practices associated with the highest risk. These 10 practices dealt with different aspects of heat treatment (lacking or insufficient), whereas the majority of the most frequent violations involved storing food at room temperature for too long. Use of the risk-based grading system for survey responses gave a more realistic picture of risks associated with domestic food handling practices. The method highlighted important violations and minor errors, which are performed by most people and are not associated with significant risk. Surveys built on a HACCP-based approach with risk-based grading will contribute to a better understanding of domestic food handling practices and will be of great value for targeted information and educational activities.

  10. METHODOLOGICAL ASPECTS OF RATIONAL DESIGN FORMATION OF INFRASTRUCTURE OF AGRARIAN SECTOR OF UKRAINE

    Directory of Open Access Journals (Sweden)

    Ivan Korchynskyy

    2016-11-01

    Full Text Available Methodological aspects of formation of rational design of infrastructure of agrarian sector of Ukraine on the basis of the institutional approach and laws of architectonics are examined. It is shown that the agrarian sector of Ukraine is a complex socio-economic system, the formation and development of which is in the process of market transformation what is caused by institutional influences. In general the process of relations institutionalization imply their formalization and standardization, in other case the subject of public life could not predict the actions of other entities associated with him and ensure their cooperation. One of the specific characteristic of human society is formed institutional system that regulates behaviour. In the article the factors of influence on the conduct of being in charge subjects are considered in the conditions of development of market economy. The special attention is spared the institutional factors of the economy growing. Methodology. The meaning of “agricultural field” and “infrastructure” and their mutual consistency is classified. As the scientific method, the institutional approach of principles of architectonics has been used, which allowed to justify the creation of a rational approach to the design of infrastructure in agrarian sector as a whole on the basis, relation and interdependence of its elements, based on the fundamental laws of architectonics (law of equilibrium, law of the golden mean structuring. The article demonstrates a necessary of the choice of a theory of institutionalism as the main methodological basis for the study of the process of innovation development of economic system of Ukraine. It is determined that the inefficient activities of institutions in Ukraine are the main cause of the low level of innovation, which has a negative impact on the development of the economy as a whole. Results. Research points on new aspects of infrastructure as a part of the entire

  11. Methodology of a nationwide cross-sectional survey of prevalence and epidemiological patterns of hepatitis A, B and C infection in Brazil.

    Science.gov (United States)

    Ximenes, Ricardo Arraes de Alencar; Pereira, Leila Maria Beltrão; Martelli, Celina Maria Turchi; Merchán-Hamann, Edgar; Stein, Airton Tetelbom; Figueiredo, Gerusa Maria; Braga, Maria Cynthia; Montarroyos, Ulisses Ramos; Brasil, Leila Melo; Turchi, Marília Dalva; Fonseca, José Carlos Ferraz da; Lima, Maria Luiza Carvalho de; Alencar, Luis Cláudio Arraes de; Costa, Marcelo; Coral, Gabriela; Moreira, Regina Celia; Cardoso, Maria Regina Alves

    2010-09-01

    A population-based survey to provide information on the prevalence of hepatitis viral infection and the pattern of risk factors was carried out in the urban population of all Brazilian state capitals and the Federal District, between 2005 and 2009. This paper describes the design and methodology of the study which involved a population aged 5 to 19 for hepatitis A and 10 to 69 for hepatitis B and C. Interviews and blood samples were obtained through household visits. The sample was selected using stratified multi-stage cluster sampling and was drawn with equal probability from each domain of study (region and age-group). Nationwide, 19,280 households and ~31,000 residents were selected. The study is large enough to detect prevalence of viral infection around 0.1% and risk factor assessments within each region. The methodology seems to be a viable way of differentiating between distinct epidemiological patterns of hepatitis A, B and C. These data will be of value for the evaluation of vaccination policies and for the design of control program strategies.

  12. Response surface methodology and process optimization of sustained release pellets using Taguchi orthogonal array design and central composite design

    Science.gov (United States)

    Singh, Gurinder; Pai, Roopa S.; Devi, V. Kusum

    2012-01-01

    Furosemide is a powerful diuretic and antihypertensive drug which has low bioavailability due to hepatic first pass metabolism and has a short half-life of 2 hours. To overcome the above drawback, the present study was carried out to formulate and evaluate sustained release (SR) pellets of furosemide for oral administration prepared by extrusion/spheronization. Drug Coat L-100 was used within the pellet core along with microcrystalline cellulose as the diluent and concentration of selected binder was optimized to be 1.2%. The formulation was prepared with drug to polymer ratio 1:3. It was optimized using Design of Experiments by employing a 32 central composite design that was used to systematically optimize the process parameters combined with response surface methodology. Dissolution studies were carried out with USP apparatus Type I (basket type) in both simulated gastric and intestinal pH. The statistical technique, i.e., the two-tailed paired t test and one-way ANOVA of in vitro data has proposed that there was very significant (P≤0.05) difference in dissolution profile of furosemide SR pellets when compared with pure drug and commercial product. Validation of the process optimization study indicated an extremely high degree of prognostic ability. The study effectively undertook the development of optimized process parameters of pelletization of furosemide pellets with tremendous SR characteristics. PMID:22470891

  13. Response surface methodology and process optimization of sustained release pellets using Taguchi orthogonal array design and central composite design

    Directory of Open Access Journals (Sweden)

    Gurinder Singh

    2012-01-01

    Full Text Available Furosemide is a powerful diuretic and antihypertensive drug which has low bioavailability due to hepatic first pass metabolism and has a short half-life of 2 hours. To overcome the above drawback, the present study was carried out to formulate and evaluate sustained release (SR pellets of furosemide for oral administration prepared by extrusion/spheronization. Drug Coat L-100 was used within the pellet core along with microcrystalline cellulose as the diluent and concentration of selected binder was optimized to be 1.2%. The formulation was prepared with drug to polymer ratio 1:3. It was optimized using Design of Experiments by employing a 3 2 central composite design that was used to systematically optimize the process parameters combined with response surface methodology. Dissolution studies were carried out with USP apparatus Type I (basket type in both simulated gastric and intestinal pH. The statistical technique, i.e., the two-tailed paired t test and one-way ANOVA of in vitro data has proposed that there was very significant ( P≤0.05 difference in dissolution profile of furosemide SR pellets when compared with pure drug and commercial product. Validation of the process optimization study indicated an extremely high degree of prognostic ability. The study effectively undertook the development of optimized process parameters of pelletization of furosemide pellets with tremendous SR characteristics.

  14. Induced Polarization Surveying for Acid Rock Screening in Highway Design

    Science.gov (United States)

    Butler, K. E.; Al, T.; Bishop, T.

    2004-05-01

    Highway and pipeline construction agencies have become increasingly vigilant in their efforts to avoid cutting through sulphide-bearing bedrock that has potential to produce acid rock drainage. Blasting and fragmentation of such rock increases the surface area available for sulphide oxidation and hence increases the risk of acid rock drainage unless the rock contains enough natural buffering capacity to neutralize the pH. In December, 2001, the New Brunswick Department of Transportation (NBOT) sponsored a field trial of geophysical surveying in order to assess its suitability as a screening tool for locating near-surface sulphides along proposed highway alignments. The goal was to develop a protocol that would allow existing programs of drilling and geochemical testing to be targeted more effectively, and provide design engineers with the information needed to reduce rock cuts where necessary and dispose of blasted material in a responsible fashion. Induced polarization (IP) was chosen as the primary geophysical method given its ability to detect low-grade disseminated mineralization. The survey was conducted in dipole-dipole mode using an exploration-style time domain IP system, dipoles 8 to 25 m in length, and six potential dipoles for each current dipole location (i.e. n = 1 - 6). Supplementary information was provided by resistivity and VLF-EM surveys sensitive to lateral changes in electrical conductivity, and by magnetic field surveying chosen for its sensitivity to the magnetic susceptibility of pyrrhotite. Geological and geochemical analyses of samples taken from several IP anomalies located along 4.3 line-km of proposed highway confirmed the effectiveness of the screening technique. IP pseudosections from a region of metamorphosed shales and volcaniclastic rocks identified discrete, well-defined mineralized zones. Stronger, overlapping, and more laterally extensive IP anomalies were observed over a section of graphitic and sulphide-bearing metasedimentary

  15. Rationale, design, methodology and sample characteristics for the Vietnam pre-conceptual micronutrient supplementation trial (PRECONCEPT: a randomized controlled study

    Directory of Open Access Journals (Sweden)

    Nguyen Phuong H

    2012-10-01

    Full Text Available Abstract Background Low birth weight and maternal anemia remain intractable problems in many developing countries. The adequacy of the current strategy of providing iron-folic acid (IFA supplements only during pregnancy has been questioned given many women enter pregnancy with poor iron stores, the substantial micronutrient demand by maternal and fetal tissues, and programmatic issues related to timing and coverage of prenatal care. Weekly IFA supplementation for women of reproductive age (WRA improves iron status and reduces the burden of anemia in the short term, but few studies have evaluated subsequent pregnancy and birth outcomes. The Preconcept trial aims to determine whether pre-pregnancy weekly IFA or multiple micronutrient (MM supplementation will improve birth outcomes and maternal and infant iron status compared to the current practice of prenatal IFA supplementation only. This paper provides an overview of study design, methodology and sample characteristics from baseline survey data and key lessons learned. Methods/design We have recruited 5011 WRA in a double-blind stratified randomized controlled trial in rural Vietnam and randomly assigned them to receive weekly supplements containing either: 1 2800 μg folic acid 2 60 mg iron and 2800 μg folic acid or 3 MM. Women who become pregnant receive daily IFA, and are being followed through pregnancy, delivery, and up to three months post-partum. Study outcomes include birth outcomes and maternal and infant iron status. Data are being collected on household characteristics, maternal diet and mental health, anthropometry, infant feeding practices, morbidity and compliance. Discussion The study is timely and responds to the WHO Global Expert Consultation which identified the need to evaluate the long term benefits of weekly IFA and MM supplementation in WRA. Findings will generate new information to help guide policy and programs designed to reduce the burden of anemia in women and

  16. Data Processing Procedures and Methodology for Estimating Trip Distances for the 1995 American Travel Survey (ATS)

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, H.-L.; Rollow, J.

    2000-05-01

    The 1995 American Travel Survey (ATS) collected information from approximately 80,000 U.S. households about their long distance travel (one-way trips of 100 miles or more) during the year of 1995. It is the most comprehensive survey of where, why, and how U.S. residents travel since 1977. ATS is a joint effort by the U.S. Department of Transportation (DOT) Bureau of Transportation Statistics (BTS) and the U.S. Department of Commerce Bureau of Census (Census); BTS provided the funding and supervision of the project, and Census selected the samples, conducted interviews, and processed the data. This report documents the technical support for the ATS provided by the Center for Transportation Analysis (CTA) in Oak Ridge National Laboratory (ORNL), which included the estimation of trip distances as well as data quality editing and checking of variables required for the distance calculations.

  17. A game-based decision support methodology for competitive systems design

    Science.gov (United States)

    Briceno, Simon Ignacio

    This dissertation describes the development of a game-based methodology that facilitates the exploration and selection of research and development (R&D) projects under uncertain competitive scenarios. The proposed method provides an approach that analyzes competitor positioning and formulates response strategies to forecast the impact of technical design choices on a project's market performance. A critical decision in the conceptual design phase of propulsion systems is the selection of the best architecture, centerline, core size, and technology portfolio. This selection can be challenging when considering evolving requirements from both the airframe manufacturing company and the airlines in the market. Furthermore, the exceedingly high cost of core architecture development and its associated risk makes this strategic architecture decision the most important one for an engine company. Traditional conceptual design processes emphasize performance and affordability as their main objectives. These areas alone however, do not provide decision-makers with enough information as to how successful their engine will be in a competitive market. A key objective of this research is to examine how firm characteristics such as their relative differences in completing R&D projects, differences in the degree of substitutability between different project types, and first/second-mover advantages affect their product development strategies. Several quantitative methods are investigated that analyze business and engineering strategies concurrently. In particular, formulations based on the well-established mathematical field of game theory are introduced to obtain insights into the project selection problem. The use of game theory is explored in this research as a method to assist the selection process of R&D projects in the presence of imperfect market information. The proposed methodology focuses on two influential factors: the schedule uncertainty of project completion times and

  18. The determinants of public spending: a survey in a methodological perspective

    OpenAIRE

    Facchini, Francois

    2014-01-01

    SURVEY: This article shows that applied econometric is not a way of selecting, from among a plethora of possible explanations of public spending evolution. It lists 19 explanations and 73 explanatory variables and provides evidence of the great confusion in this field and the relative emptiness of quantitative economics. Then it sustains the Mayer’s idea that “given all the weakness of econometric techniques, other ways of testing, such as appeals to qualitative economic history, should not b...

  19. 2016 Workplace and Gender Relations Survey of Active Duty Members: Statistical Methodology Report

    Science.gov (United States)

    2017-03-01

    precision on estimates. There was no administrative data associated with 16 of these domains since they associated with either sexual assault or... sexual harassment . The precision requirement for each domain is typically based on an estimated prevalence rate of 50 percent with a 95 percent...the 2014 RMWS and 2015 WGRR surveys, RSSC modeled the following six outcome variables separately for females and males: sexual harassment , gender

  20. A Methodology for Instructional Design in Mathematics--With the Generic and Epistemic Student at the Centre

    Science.gov (United States)

    Strømskag, Heidi

    2017-01-01

    This theoretical paper presents a methodology for instructional design in mathematics. It is a theoretical analysis of a proposed model for instructional design, where tasks are embedded in situations that preserve meaning with respect to particular pieces of mathematical knowledge. The model is applicable when there is an intention of teaching…