WorldWideScience

Sample records for survey maps developed

  1. NGS Survey Control Map

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NGS Survey Control Map provides a map of the US which allows you to find and display geodetic survey control points stored in the database of the National...

  2. Survey on Ontology Mapping

    Science.gov (United States)

    Zhu, Junwu

    To create a sharable semantic space in which the terms from different domain ontology or knowledge system, Ontology mapping become a hot research point in Semantic Web Community. In this paper, motivated factors of ontology mapping research are given firstly, and then 5 dominating theories and methods, such as information accessing technology, machine learning, linguistics, structure graph and similarity, are illustrated according their technology class. Before we analyses the new requirements and takes a long view, the contributions of these theories and methods are summarized in details. At last, this paper suggest to design a group of semantic connector with the ability of migration learning for OWL-2 extended with constrains and the ontology mapping theory of axiom, so as to provide a new methodology for ontology mapping.

  3. Drawing subway maps : a survey

    NARCIS (Netherlands)

    Wolff, A.

    2007-01-01

    This paper deals with automating the drawing of subway maps. There are two features of schematic subway maps that make them different from drawings of other networks such as flow charts or organigrams. First, most schematic subway maps use not only horizontal and vertical lines, but also diagonals.

  4. An Advanced Radiological Survey and Mapping System

    International Nuclear Information System (INIS)

    McCown, J.; Rogers, D.; Waggoner, Ch.

    2009-01-01

    A variety of radiological surveying systems have been described in the literature. This paper describes relative performances of a system that can employ a variety of radiological sensors including NaI, LiI, and LaBr 3 units of various sizes. The system includes navigation and data collection software that facilitates surveying without the use of survey grid-lines. Parameters presented to the operator via a graphical user interface (GUI) for monitoring system performance and navigation are described. Radiological spectra are logged along with position data from three differential GPS sensors to enhance position accuracy by taking into account the pitch and roll as the survey vehicle moves over uneven terrain. Accuracy of position data increases the potential for, and value of, data fusion with other survey data such as electromagnetic induction images. The survey system described has been developed around a zero turn radius lawn mower equipped with on-board generator/inverter for powering electronic and data communication equipment to maximize surveying effectiveness. Detection limits for U-238 will be discussed for the NaI (FIDLER, 75x75 mm, and 100x100x400 mm) and LaBr 3 (75x75 mm) detectors. These parameters will be reported for a variety of survey speeds (stationary, 1, 2, and 3 m/s), with and without the use of advanced signal processing to increase detection sensitivity. A background subtraction algorithm evaluating each spectrum for the presence of naturally occurring radiological materials will also be described for correcting each datum prior to mapping using Geosoft Oasis montaj. (authors)

  5. Land survey map of air pollutants

    International Nuclear Information System (INIS)

    Hadzi-Mishev, Dimitar

    1996-01-01

    The first step toward finding a solution to the problems with air pollution is the realization of a land survey map of polluters and a constant acquisition of data from periodical controls of emission of harmful materials, which will be carried out with a determined dynamic. Such a land survey map is not a project which should be finished within a strict time limit, but is intended to create all conditions for a periodical monitoring of emission of harmful materials from registered polluters in order to make a periodical, exact picture of the quantity of harmful materials, which are conveyed by polluters in certain city, a part of the state or the whole country. (author). 4 ills

  6. a comparative survey on mind mapping tools

    Directory of Open Access Journals (Sweden)

    Avgoustos A. TSINAKOS

    2009-07-01

    Full Text Available Mind Mapping is an important technique that improves the way you takes notes, and enhances your creative problem solving. By using Mind Maps, you can quickly identify and understand the structure of a subject and the way that pieces of information fit together, as well as recording the raw facts contained in normal notes. It can also be used as complementary tools for knowledge construction and sharing. Their suitability as a pedagogical tool for education, e-learning and training, increases their importance. Also, in a world of information overload and businesses struggling to keep up with the place of change, knowledge workers need effective tools to organize, analyze, brainstorm and collaborate on ideas. In resent years, a wide variety of mind mapping software tools have been developed. An often question that comes up, due to this plethora of software tools, is “which is the best mind mapping software?” Anyone who gives you an immediate answer either knows you and your mind mapping activities very well or their answer in not worth a lot. The “best” depends so much on how you use mind maps. In this paper we are trying to investigate different user profiles and to identify various axes for comparison among mind mapping tools that are suitable for a specific user profile, describe each axis and then analyze each tool.

  7. NRAO Makes Available VLA Sky Survey Maps

    Science.gov (United States)

    1994-06-01

    An original and comprehensive data set potentially full of scientific surprises now is available to astronomers, students and the public through the information superhighway. Radio images of the sky produced by the Very Large Array radio telescope -- one of the premier astronomical instruments in the world -- as part of a massive survey now are stored in an electronic repository avail- able over the Internet computer communications network. "Each of these sensitive new sky maps shows about a thou- sand radio-emitting objects, most of which have never been seen before," said Dr. J. J. Condon, leader of the National Radio As- tronomy Observatory (NRAO) survey team. "We are releasing them as soon as they are completed because they contain more data than we could possibly analyze by ourselves." "By using electronic distribution, we can open this tre- mendous resource of information for computer analysis by all as- tronomers immediately, without waiting for traditional publication," Condon added. The radio images are copyright NRAO/ AUI. Permission is granted for use of the material without charge for scholarly, educational and private non-commercial purposes. "It is entirely conceivable -- even probable -- that valuable discoveries will be made by students or amateur astrono- mers who devote the time to study these maps carefully," said team member Dr. W. D. Cotton. "Making this new information available electronically means that more people can participate in adding to its scientific value." The maps are a product of the NRAO VLA Sky Survey (NVSS), which began its observational phase in September of 1993 and will cover 82 percent of the sky when completed by the end of 1996. The NVSS is expected to produce a catalog of more than two million ra- dio-emitting objects in the sky, and it is the first sky survey sensitive to linearly polarized emission from radio sources beyond our own Milky Way galaxy. "The NVSS is being made as a service to the entire astronomical

  8. Developing the online survey.

    Science.gov (United States)

    Gordon, Jeffry S; McNew, Ryan

    2008-12-01

    Institutions of higher education are now using Internet-based technology tools to conduct surveys for data collection. Research shows that the type and quality of responses one receives with online surveys are comparable with what one receives in paper-based surveys. Data collection can take place on Web-based surveys, e-mail-based surveys, and personal digital assistants/Smartphone devices. Web surveys can be subscription templates, software packages installed on one's own server, or created from scratch using Web programming development tools. All of these approaches have their advantages and disadvantages. The survey owner must make informed decisions as to the right technology to implement. The correct choice can save hours of work in sorting, organizing, and analyzing data.

  9. Mapping the Development of Psychology

    OpenAIRE

    Flis, Ivan

    2015-01-01

    An invited presentation I gave at the PSI EGG One-day Conference for Early Career Psychologists in Ireland on my ongoing research of mapping the historical development of psychology through journal text-mining. 

  10. UAS Mapping as an alternative for land surveying techniques?

    Directory of Open Access Journals (Sweden)

    L. Devriendt

    2014-03-01

    Full Text Available Can a UAS mapping technique compete with standard surveying techniques? Since the boom in different RPAS (remotely piloted air system, UAV (unmanned aerial vehicle, or UAS (unmanned aerial system, this is one of the crucial questions when it comes to UAS mappings. Not the looks and feels are important but the reliability, ease-to-use, and accuracy that you get with a system based on hardware and corresponding software. This was also one of the issues that the Dutch Land Registry asked a few months ago aimed at achieving an effective and usable system for updating property boundaries in new-build districts. Orbit GT gave them a ready-made answer: a definitive outcome based on years of research and development in UAS mapping technology and software.

  11. The National Map Customer Requirements: Findings from Interviews and Surveys

    Science.gov (United States)

    Sugarbaker, Larry; Coray, Kevin E.; Poore, Barbara

    2009-01-01

    The purpose of this study was to receive customer feedback and to understand data and information requirements for The National Map. This report provides results and findings from interviews and surveys and will guide policy and operations decisions about data and information requirements leading to the development of a 5-year strategic plan for the National Geospatial Program. These findings are based on feedback from approximately 2,200 customers between February and August 2008. The U.S. Geological Survey (USGS) conducted more than 160 interviews with 200 individuals. The American Society for Photogrammetry and Remote Sensing (ASPRS) and the International Map Trade Association (IMTA) surveyed their memberships and received feedback from over 400 members. The Environmental Systems Research Institute (ESRI) received feedback from over 1,600 of its U.S.-based software users through an online survey sent to customers attending the ESRI International User Conference in the summer of 2008. The results of these surveys were shared with the USGS and have been included in this report.

  12. California Geological Survey Geologic Map Index

    Data.gov (United States)

    California Natural Resource Agency — All the individual maps from the Geologic Atlas of California and the Regional Geologic map series have been georeferenced for display in a GIS (and viewable online...

  13. Research on the Application of Rapid Surveying and Mapping for Large Scare Topographic Map by Uav Aerial Photography System

    Science.gov (United States)

    Gao, Z.; Song, Y.; Li, C.; Zeng, F.; Wang, F.

    2017-08-01

    Rapid acquisition and processing method of large scale topographic map data, which relies on the Unmanned Aerial Vehicle (UAV) low-altitude aerial photogrammetry system, is studied in this paper, elaborating the main work flow. Key technologies of UAV photograph mapping is also studied, developing a rapid mapping system based on electronic plate mapping system, thus changing the traditional mapping mode and greatly improving the efficiency of the mapping. Production test and achievement precision evaluation of Digital Orth photo Map (DOM), Digital Line Graphic (DLG) and other digital production were carried out combined with the city basic topographic map update project, which provides a new techniques for large scale rapid surveying and has obvious technical advantage and good application prospect.

  14. Digital Field Mapping with the British Geological Survey

    Science.gov (United States)

    Leslie, Graham; Smith, Nichola; Jordan, Colm

    2014-05-01

    data into corporate standard geological models and derivative map outputs. BGS•SIGMA2012 is the default toolkit within BGS for bedrock and superficial geological mapping and other data acquisition projects across the UK, both onshore and offshore. It is used in mapping projects in Africa, the Middle East and the USA, and has been taken to Japan as part of the Tohoku tsunami damage assessment project. It is also successfully being used worldwide by other geological surveys e.g. Norway and Tanzania; by universities including Leicester, Keele and Kyoto, and by organisations such as Vale Mining in Brazil and the Montana Bureau of Mines and Geology. It is used globally, with over 2000 licenses downloaded worldwide to date and in use on all seven continents. Development of the system is still ongoing as a result of both user feedback and the changing face of technology. Investigations into the development of a BGS•SIGMA smartphone app are currently taking place alongside system developments such as a new and more streamlined data entry system.

  15. Bathymetric Contour Maps of Lakes Surveyed in Iowa in 2005

    Science.gov (United States)

    Linhart, S.M.; Lund, K.D.

    2008-01-01

    The U.S. Geological Survey, in cooperation with the Iowa Department of Natural Resources, conducted bathymetric surveys on seven lakes in Iowa during 2005 (Arrowhead Pond, Central Park Lake, Lake Keomah, Manteno Park Pond, Lake Miami, Springbrook Lake, and Yellow Smoke Lake). The surveys were conducted to provide the Iowa Department of Natural Resources with information for the development of total maximum daily load limits, particularly for estimating sediment load and deposition rates. The bathymetric surveys provide a baseline for future work on sediment loads and deposition rates for these lakes. All of the lakes surveyed in 2005 are man-made lakes with fixed spillways. Bathymetric data were collected using boat-mounted, differential global positioning system, echo depth-sounding equipment, and computer software. Data were processed with commercial hydrographic software and exported into a geographic information system for mapping and calculating area and volume. Lake volume estimates ranged from 47,784,000 cubic feet (1,100 acre-feet) at Lake Miami to 2,595,000 cubic feet (60 acre-feet) at Manteno Park Pond. Surface area estimates ranged from 5,454,000 square feet (125 acres) at Lake Miami to 558,000 square feet (13 acres) at Springbrook Lake.

  16. Historical Map & Chart Collection of NOAA's Nautical Charts, Hydrographic Surveys, Topographic Surveys, Geodetic Surveys, City Plans, and Civil War Battle Maps Starting from the mid 1700's

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Historical Map and Chart Collection of the Office of Coast Survey contains over 20000 historical maps and charts from the mid 1700s through the late 1900s. These...

  17. Using Concept Maps to Teach a Nanotechnology Survey Short Course

    Science.gov (United States)

    Moyses, David D.; Rivet, Jennifer L.; Fahlman, Bradley D.

    2010-01-01

    We describe the use of concept maps within a 4-week nanotechnology survey course, designed for first-year undergraduate students. Because of the extremely short time frame of the class, students would be inundated with an overwhelming number of new concepts and definitions. Hence, we employed concept mapping to increase student retention and…

  18. Geologic mapping of Kentucky; a history and evaluation of the Kentucky Geological Survey--U.S. Geological Survey Mapping Program, 1960-1978

    Science.gov (United States)

    Cressman, Earle Rupert; Noger, Martin C.

    1981-01-01

    . Paleontologists and stratigraphers of the U.S. Geological Survey cooperated closely with the program. Paleontologic studies were concentrated in the Ordovician of central Kentucky, the Pennsylvanian of eastern and western Kentucky, and the Mesozoic and Cenozoic of westernmost Kentucky. In addition to financial support, the Kentucky Geological Survey provided economic data, stratigraphic support, and drillhole records to the field offices. Geologists of the State Survey made subsurface structural interpretations, constructed bedrock topography maps, and mapped several quadrangles. Some of the problems encountered were the inadequacy of much of the existing stratigraphic nomenclature, the uneven quality of some of the mapping, and the effects of relative isolation on the professional development of some of the geologists. The program cost a total of $20,927,500. In terms of 1960 dollars, it cost $16,035,000; this compares with an original estimate of $12,000,000. Although it is difficult to place a monetary value on the geologic mapping, the program has contributed to newly discovered mineral wealth, jobs, and money saved by government and industry. The maps are used widely in the exploration for coal, oil and gas, fluorspar, limestone, and clay. The maps are also used in planning highways and locations of dams, in evaluating foundation and excavation conditions, in preparing environmental impact statements, and in land-use planning.

  19. Digital surveying and mapping of forest road network for development of a GIS tool for the effective protection and management of natural ecosystems

    Science.gov (United States)

    Drosos, Vasileios C.; Liampas, Sarantis-Aggelos G.; Doukas, Aristotelis-Kosmas G.

    2014-08-01

    In our time, the Geographic Information Systems (GIS) have become important tools, not only in the geosciences and environmental sciences, as well as virtually for all researches that require monitoring, planning or land management. The purpose of this paper was to develop a planning tool and decision making tool using AutoCAD Map software, ArcGIS and Google Earth with emphasis on the investigation of the suitability of forest roads' mapping and the range of its implementation in Greece in prefecture level. Integrating spatial information into a database makes data available throughout the organization; improving quality, productivity, and data management. Also working in such an environment, you can: Access and edit information, integrate and analyze data and communicate effectively. To select desirable information such as forest road network in a very early stage in the planning of silviculture operations, for example before the planning of the harvest is carried out. The software programs that were used were AutoCAD Map for the export in shape files for the GPS data, and ArcGIS in shape files (ArcGlobe), while Google Earth with KML files (Keyhole Markup Language) in order to better visualize and evaluate existing conditions, design in a real-world context and exchange information with government agencies, utilities, and contractors in both CAD and GIS data formats. The automation of the updating procedure and transfer of any files between agencies-departments is one of the main tasks of the integrated GIS-tool among the others should be addressed.

  20. Software survey: VOSviewer, a computer program for bibliometric mapping

    NARCIS (Netherlands)

    N.J.P. van Eck (Nees Jan); L. Waltman (Ludo)

    2010-01-01

    textabstractWe present VOSviewer, a freely available computer program that we have developed for constructing and viewing bibliometric maps. Unlike most computer programs that are used for bibliometric mapping, VOSviewer pays special attention to the graphical representation of bibliometric maps.

  1. Geological Mapping of Sabah, Malaysia, Using Airborne Gravity Survey

    DEFF Research Database (Denmark)

    Fauzi Nordin, Ahmad; Jamil, Hassan; Noor Isa, Mohd

    2016-01-01

    Airborne gravimetry is an effective tool for mapping local gravity fields using a combination of airborne sensors, aircraft and positioning systems. It is suitable for gravity surveys over difficult terrains and areas mixed with land and ocean. This paper describes the geological mapping of Sabah...... using airborne gravity surveys. Airborne gravity data over land areas of Sabah has been combined with the marine airborne gravity data to provide a seamless land-to-sea gravity field coverage in order to produce the geological mapping. Free-air and Bouguer anomaly maps (density 2.67 g/cm3) have been...... derived from the airborne data both as simple ad-hoc plots (at aircraft altitude), and as final plots from the downward continued airborne data, processed as part of the geoids determination. Data are gridded at 0.025 degree spacing which is about 2.7 km and the data resolution of the filtered airborne...

  2. Standardization of mapping practices in the British Geological Survey

    Science.gov (United States)

    Allen, Peter M.

    1997-07-01

    Because the British Geological Survey (BGS) has had, since its foundation in 1835, a mandate to produce geological maps for the whole of Great Britain, there is a long history of introducing standard practices in the way rocks and rock units have been named, classified and illustrated on maps. The reasons for the failure of some of these practices are examined and assessed in relation to the needs of computerized systems for holding and disseminating geological information.

  3. BGS·SIGMA - Digital mapping at the British Geological Survey

    Science.gov (United States)

    Smith, Nichola; Lawrie, Ken

    2017-04-01

    Geological mapping methods have evolved significantly over recent decades and this has included the transition to digital field data capture. BGS has been developing methodologies and technologies for this since 2001, and has now reached a stage where our custom built data capture and map compilation system (BGS·SIGMAv2015) is the default toolkit, within BGS, for bedrock and superficial mapping across the UK and overseas. In addition, BGS scientists also use the system for other data acquisition projects, such as landslide assessment, geodiversity audits and building stone studies. BGS·SIGMAv2015 is an integrated toolkit which enables assembly, interrogation and visualisation of existing geological information; capture of, and integration with, new data and geological interpretations; and delivery of digital products and services. From its early days as a system which used PocketGIS run on Husky Fex21 hardware, to the present day system, developed using ESRI's ArcGIS built on top of a bespoke relational data model, running on ruggedized tablet PCs with integrated GPS units, the system has evolved into a comprehensive system for digital geological data capture, mapping and compilation. The benefits, for BGS, of digital data capture are huge. Not only are the data being gathered in a standardised format, with the use of dictionaries to ensure consistency, but project teams can start building their digital geological map in the field by merging data collected by colleagues, building line-work and polygons, and subsequently identifying areas for further investigation. This digital data can then be easily incorporated into corporate databases and used in 3D modelling and visualisation software once back in the office. BGS is now at a stage where the free external release of our digital mapping system is in demand across the world, with 3000 licences being issued to date, and is successfully being used by other geological surveys, universities and exploration companies

  4. Global Land Survey Impervious Mapping Project Web Site

    Science.gov (United States)

    DeColstoun, Eric Brown; Phillips, Jacqueline

    2014-01-01

    The Global Land Survey Impervious Mapping Project (GLS-IMP) aims to produce the first global maps of impervious cover at the 30m spatial resolution of Landsat. The project uses Global Land Survey (GLS) Landsat data as its base but incorporates training data generated from very high resolution commercial satellite data and using a Hierarchical segmentation program called Hseg. The web site contains general project information, a high level description of the science, examples of input and output data, as well as links to other relevant projects.

  5. Surveying and Mapping Geographical Information from the Perspective of Geography

    Directory of Open Access Journals (Sweden)

    LÜ Guonian

    2017-10-01

    Full Text Available It briefly reviewed the history of geographic information content development since the existence of geographic information system. It pointed out that the current definition of geographic information is always the extension from the "spatial+ attributes" basic mapping framework of geographic information. It is increasingly difficult to adapt to the analysis and application of spatial-temporal big data. From the perspective of geography research subject and content, it summarized systematically that the content and extension of the "geographic information" that geography needs. It put forward that a six-element expression model of geographic information, including spatial location, semantic description, attribute characteristics, geometric form, evolution process, and objects relationship.Under the guidance of the laws of geography, for geographical phenomenon of spatial distribution, temporal pattern and evolution process, the interaction mechanism of the integrated expression, system analysis and efficient management, it designed that a unified GIS data model which is expressed by six basic elements, a new GIS data structure driven by geographical rules and interaction, and key technologies of unstructured spatio-temporal data organization and storage. It provided that a theoretical basis and technical support for the shift from the surveying and mapping geographic information to the scientific geographic information, and it can help improving the organization, management, analysis and expression ability of the GIS of the geographical laws such as geographical pattern, evolution process, and interaction between elements.

  6. Indoor and Outdoor Mobile Mapping Systems for Architectural Surveys

    Science.gov (United States)

    Campi, M.; di Luggo, A.; Monaco, S.; Siconolfi, M.; Palomba, D.

    2018-05-01

    This paper presents the results of architectural surveys carried out with mobile mapping systems. The data acquired through different instruments for both indoor and outdoor surveying are analyzed and compared. The study sample shows what is required for an acquisition in a dynamic mode indicating the criteria for the creation of a georeferenced network for indoor spaces, as well as the operational processes concerning data capture, processing, and management. The differences between a dynamic and static scan have been evaluated, with a comparison being made with the aerial photogrammetric survey of the same sample.

  7. Mapping neighborhood scale survey responses with uncertainty metrics

    Directory of Open Access Journals (Sweden)

    Charles Robert Ehlschlaeger

    2016-12-01

    Full Text Available This paper presents a methodology of mapping population-centric social, infrastructural, and environmental metrics at neighborhood scale. This methodology extends traditional survey analysis methods to create cartographic products useful in agent-based modeling and geographic information analysis. It utilizes and synthesizes survey microdata, sub-upazila attributes, land use information, and ground truth locations of attributes to create neighborhood scale multi-attribute maps. Monte Carlo methods are employed to combine any number of survey responses to stochastically weight survey cases and to simulate survey cases' locations in a study area. Through such Monte Carlo methods, known errors from each of the input sources can be retained. By keeping individual survey cases as the atomic unit of data representation, this methodology ensures that important covariates are retained and that ecological inference fallacy is eliminated. These techniques are demonstrated with a case study from the Chittagong Division in Bangladesh. The results provide a population-centric understanding of many social, infrastructural, and environmental metrics desired in humanitarian aid and disaster relief planning and operations wherever long term familiarity is lacking. Of critical importance is that the resulting products have easy to use explicit representation of the errors and uncertainties of each of the input sources via the automatically generated summary statistics created at the application's geographic scale.

  8. MAPS development for the ALICE ITS upgrade

    OpenAIRE

    Yang, P; Aglieri, G; Cavicchioli, C; Chalmet, P L; Chanlek, N; Collu, A; Gao, C; Hillemanns, H; Junique, A; Kofarago, M; Keil, M; Kugathasan, T; Kim, D; Kim, J; Lattuca, A

    2015-01-01

    Monolithic Active Pixel Sensors (MAPS) offer the possibility to build pixel detectors and tracking layers with high spatial resolution and low material budget in commercial CMOS processes. Significant progress has been made in the field of MAPS in recent years, and they are now considered for the upgrades of the LHC experiments. This contribution will focus on MAPS detectors developed for the ALICE Inner Tracking System (ITS) upgrade and manufactured in the TowerJazz 180 nm CMOS imaging senso...

  9. Visual Analysis Based on the Data of Chinese Surveying and Mapping Journals

    Science.gov (United States)

    Li, Jing; Liu, Haiyan; Guo, Wenyue; Yu, Anzhu

    2016-06-01

    Taking four influential Chinese surveying and mapping journals as the data source, 5863 papers published during the period of 2003-2013 were obtained. Using the method of bibliometrics and visual analysis, summarizing the surveying and mapping papers in the past ten years (2003-2013), research themes, authors, and geographical distribution were analyzed. In the study, the papers of geodesy, cartography and GIS are 59.9%, more than half of all the papers. We also determine that the core author group has 131 authors, mainly of whom are from big cities. 90% of top ten cities on the number of publishing papers are capital cities or municipalities directly under the central government.In conclusion, we found that the research focus was different every year, and the research content was richness, the content of geodesy, cartography and GIS were widely researched, and the development of surveying and mapping is imbalanced in China.

  10. Developing an ionospheric map for South Africa

    Directory of Open Access Journals (Sweden)

    D. I. Okoh

    2010-07-01

    Full Text Available The development of a map of the ionosphere over South Africa is presented in this paper. The International Reference Ionosphere (IRI model, South African Bottomside Ionospheric Model (SABIM, and measurements from ionosondes in the South African Ionosonde Network, were combined within their own limitations to develop an accurate representation of the South African ionosphere. The map is essentially in the form of a computer program that shows spatial and temporal representations of the South African ionosphere for a given set of geophysical parameters. A validation of the map is attempted using a comparison of Total Electron Content (TEC values derived from the map, from the IRI model, and from Global Positioning System (GPS measurements. It is foreseen that the final South African ionospheric map will be implemented as a Space Weather product of the African Space Weather Regional Warning Centre.

  11. Developing survey grids to substantiate freedom from exotic pests

    Science.gov (United States)

    John W. Coulston; Frank H. Koch; William D. Smith

    2009-01-01

    Systematic, hierarchical intensification of the Environmental Monitoring and Assessment Program hexagon for North America yields a simple procedure for developing national-scale survey grids. In this article, we describe the steps to create a national-scale survey grid using a risk map as the starting point. We illustrate the steps using an exotic pest example in which...

  12. The Development of an Earthquake Mind Mapping

    Directory of Open Access Journals (Sweden)

    Sri Adelila Sari

    2016-05-01

    Full Text Available The students were difficult to understand about earthquake caused the teaching methods used by teachers were still using the classic method. The teachers only used a textbook to teach the students without any other supporting equipments. Learning process by using the discourse method makes students thinking monotonically, so that only concentrated on the students' understanding of the matter presented by the teacher. Therefore, this study was aimed to develop an earthquake mind mapping to help students in the process of remembering and recording the material being taught by the teacher. The type of this study was Research and Development (R & D. Data were analyzed using descriptive statistics. The samples in this study were class of I-3Madrasah Tsanawiyah (MTs Darul Ulum Banda Aceh totaling 30 students. The results showed that mind mapping was developed by 5 stages in ADDIE models: analysis (analyzing the problem and find a solution, design (determine the learning strategies, development (producing an earthquake mind mapping to be used in the learning process, implementation (implementing learning activities using the media and evaluation (evaluating the learning activities. When students instructed to create their mind mapping, it was found that the products of mind mapping categorized in skilled and quite skilled were amounted to 73.33 and 26.66% respectively. As recommendation an earthquake mind mapping could be applied and useful as an effective learning.

  13. National Nuclear Technology Map Development

    International Nuclear Information System (INIS)

    Shin, J. I.; Lee, T. J.; Yoon, S. W.

    2005-03-01

    The objective of NuTRM is to prepare a plan of nuclear R and D and technological innovations which is very likely to make nuclear technology a promising power source for future national developments. The NuTRM finds out systematically the nuclear R and D vision and the high-value-added strategic technologies to be developed by the efficient cooperation of actors including government, industry, academy and research institute by 2020. In other words, NuTRM aims at a long-term strategic planning of nuclear R and D and technological innovation in order to promote the socio-economic contributions of nuclear science and technology for the nation's future competitiveness and sustainable development and to raise the global status of the Korean nuclear R and D and Industry

  14. A design of strategic alliance based on value chain of surveying and mapping enterprises in China

    Science.gov (United States)

    Duan, Hong; Huang, Xianfeng

    2007-06-01

    In this paper, we use value chain and strategic alliance theories to analyzing the surveying and mapping Industry and enterprises. The value chain of surveying and mapping enterprises is highly-contacted but split by administrative interference, the enterprises are common small scale. According to the above things, we consider that establishing a nonequity- Holding strategic alliance based on value chain is an available way, it can not only let the enterprises share the superior resources in different sectors of the whole value chain each other but avoid offending the interests of related administrative departments, by this way, the surveying and mapping enterprises gain development respectively and totally. Then, we give the method to building up the strategic alliance model through parting the value chain and the using advantage of companies in different value chain sectors. Finally, we analyze the internal rule of strategic alliance and prove it is a suitable way to realize the development of surveying and mapping enterprises through game theory.

  15. Developing a mapping tool for tablets

    Science.gov (United States)

    Vaughan, Alan; Collins, Nathan; Krus, Mike

    2014-05-01

    Digital field mapping offers significant benefits when compared with traditional paper mapping techniques in that it provides closer integration with downstream geological modelling and analysis. It also provides the mapper with the ability to rapidly integrate new data with existing databases without the potential degradation caused by repeated manual transcription of numeric, graphical and meta-data. In order to achieve these benefits, a number of PC-based digital mapping tools are available which have been developed for specific communities, eg the BGS•SIGMA project, Midland Valley's FieldMove®, and a range of solutions based on ArcGIS® software, which can be combined with either traditional or digital orientation and data collection tools. However, with the now widespread availability of inexpensive tablets and smart phones, a user led demand for a fully integrated tablet mapping tool has arisen. This poster describes the development of a tablet-based mapping environment specifically designed for geologists. The challenge was to deliver a system that would feel sufficiently close to the flexibility of paper-based geological mapping while being implemented on a consumer communication and entertainment device. The first release of a tablet-based geological mapping system from this project is illustrated and will be shown as implemented on an iPad during the poster session. Midland Valley is pioneering tablet-based mapping and, along with its industrial and academic partners, will be using the application in field based projects throughout this year and will be integrating feedback in further developments of this technology.

  16. Experience mapping and multifunctional golf course development

    DEFF Research Database (Denmark)

    Caspersen, Ole H.; Jensen, Frank Søndergaard; Jensen, Anne Mette Dahl

    This report describes the development of a method for mapping and describing recreational experiences on golf courses. The objective is to provide a planning tool that can facilitate development of a broader multifunctional use of the golf course landscape. The project has produced several results....... The main output is this report, which provides a detailed description of the mapping procedure. This process is illustrated using examples from five test golf courses. In addition to this mapping report, a catalogue has been developed providing hands-on guidance for adapting the method in a golf club...... without the use of a specialist. During the project period, the research team has participated in a number of workshops that included representatives from golf courses, STERF, the Norwegian Golf Federation and the Danish Golf Union. At these workshops, the method was presented and discussed. This has been...

  17. Aerial radiometric and magnetic survey: Bozeman National Topographic Map, Montana

    International Nuclear Information System (INIS)

    1979-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Bozeman National Topographic Map NL12-8 are presented in Volume I and II of this report. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium, and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  18. Aerial radiometric and magnetic survey: Lander National Topographic Map, Wyoming

    International Nuclear Information System (INIS)

    1979-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Lander National Topographic Map NK12-6 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  19. Mapping 2000 2010 Impervious Surface Change in India Using Global Land Survey Landsat Data

    Science.gov (United States)

    Wang, Panshi; Huang, Chengquan; Brown De Colstoun, Eric C.

    2017-01-01

    Understanding and monitoring the environmental impacts of global urbanization requires better urban datasets. Continuous field impervious surface change (ISC) mapping using Landsat data is an effective way to quantify spatiotemporal dynamics of urbanization. It is well acknowledged that Landsat-based estimation of impervious surface is subject to seasonal and phenological variations. The overall goal of this paper is to map 200-02010 ISC for India using Global Land Survey datasets and training data only available for 2010. To this end, a method was developed that could transfer the regression tree model developed for mapping 2010 impervious surface to 2000 using an iterative training and prediction (ITP) approach An independent validation dataset was also developed using Google Earth imagery. Based on the reference ISC from the validation dataset, the RMSE of predicted ISC was estimated to be 18.4%. At 95% confidence, the total estimated ISC for India between 2000 and 2010 is 2274.62 +/- 7.84 sq km.

  20. Design and development of linked data from the National Map

    Science.gov (United States)

    Usery, E. Lynn; Varanka, Dalia E.

    2012-01-01

    The development of linked data on the World-Wide Web provides the opportunity for the U.S. Geological Survey (USGS) to supply its extensive volumes of geospatial data, information, and knowledge in a machine interpretable form and reach users and applications that heretofore have been unavailable. To pilot a process to take advantage of this opportunity, the USGS is developing an ontology for The National Map and converting selected data from nine research test areas to a Semantic Web format to support machine processing and linked data access. In a case study, the USGS has developed initial methods for legacy vector and raster formatted geometry, attributes, and spatial relationships to be accessed in a linked data environment maintaining the capability to generate graphic or image output from semantic queries. The description of an initial USGS approach to developing ontology, linked data, and initial query capability from The National Map databases is presented.

  1. Application of mapped plots for single-owner forest surveys

    Science.gov (United States)

    Paul C. Van Deusen; Francis Roesch

    2009-01-01

    Mapped plots are used for the nation forest inventory conducted by the U.S. Forest Service. Mapped plots are also useful foro single ownership inventoires. Mapped plots can handle boundary overlap and can aprovide less variable estimates for specified forest conditions. Mapping is a good fit for fixed plot inventories where the fixed area plot is used for both mapping...

  2. Bodily maps of emotions across child development.

    Science.gov (United States)

    Hietanen, Jari K; Glerean, Enrico; Hari, Riitta; Nummenmaa, Lauri

    2016-11-01

    Different basic emotions (anger, fear, disgust, happiness, sadness, and surprise) are consistently associated with distinct bodily sensation maps, which may underlie subjectively felt emotions. Here we investigated the development of bodily sensations associated with basic emotions in 6- to 17-year-old children and adolescents (n = 331). Children as young as 6 years of age associated statistically discernible, discrete patterns of bodily sensations with happiness, fear, and surprise, as well as with emotional neutrality. The bodily sensation maps changed from less to more specific, adult-like patterns as a function of age. We conclude that emotion-related bodily sensations become increasingly discrete over child development. Developing awareness of their emotion-related bodily sensations may shape the way children perceive, label, and interpret emotions. © 2016 John Wiley & Sons Ltd.

  3. Technology road mapping to guide development planning

    International Nuclear Information System (INIS)

    Goossen, J.E.; Congedo, T.V.

    2004-01-01

    For the past five years, Westinghouse Electric Company, has made ever increasing use of Technology Road Mapping, to direct company development efforts to achieve maximum benefits for our customers and ourselves. Comprised of business units in Nuclear Fuels, Nuclear Services and Nuclear Power Plants, including domestic and international business segments, Westinghouse must pay particular attention to coordinating development to satisfy the diverse needs of our growing international customer base. We must develop products which both benefit the individual Business Unit customer base, and which create synergy to produce the best possible offerings to the broader marketplace. The knowledge we gain through customer contacts and direct customer participation provides the basis from which we develop the Technology Road Map. This Road Map development process can be compared to painting a picture, where the background colors and features correspond to drivers related to the Customer and the prevailing features of the market environment. The subsequent layers of detail include broad Technical Objectives and then specific Technical Goals which will support achieving those objectives. The process is described in detail, and examples are provided. (authors)

  4. Technical note Flood map development by coupling satellite maps ...

    African Journals Online (AJOL)

    Flood maps are important for local authorities in designing mitigation plans to minimise damage and loss due to flooding. In recent years, flood events in the Sarawak River Basin, Malaysia have caused damage to property, loss of life and disruption of productive activities. Currently, the available flood map for Sarawak River ...

  5. To develop a universal gamut mapping algorithm

    International Nuclear Information System (INIS)

    Morovic, J.

    1998-10-01

    When a colour image from one colour reproduction medium (e.g. nature, a monitor) needs to be reproduced on another (e.g. on a monitor or in print) and these media have different colour ranges (gamuts), it is necessary to have a method for mapping between them. If such a gamut mapping algorithm can be used under a wide range of conditions, it can also be incorporated in an automated colour reproduction system and considered to be in some sense universal. In terms of preliminary work, a colour reproduction system was implemented, for which a new printer characterisation model (including grey-scale correction) was developed. Methods were also developed for calculating gamut boundary descriptors and for calculating gamut boundaries along given lines from them. The gamut mapping solution proposed in this thesis is a gamut compression algorithm developed with the aim of being accurate and universally applicable. It was arrived at by way of an evolutionary gamut mapping development strategy for the purposes of which five test images were reproduced between a CRT and printed media obtained using an inkjet printer. Initially, a number of previously published algorithms were chosen and psychophysically evaluated whereby an important characteristic of this evaluation was that it also considered the performance of algorithms for individual colour regions within the test images used. New algorithms were then developed on their basis, subsequently evaluated and this process was repeated once more. In this series of experiments the new GCUSP algorithm, which consists of a chroma-dependent lightness compression followed by a compression towards the lightness of the reproduction cusp on the lightness axis, gave the most accurate and stable performance overall. The results of these experiments were also useful for improving the understanding of some gamut mapping factors - in particular gamut difference. In addition to looking at accuracy, the pleasantness of reproductions obtained

  6. Landsat Image Map Production Methods at the U. S. Geological Survey

    Science.gov (United States)

    Kidwell, R.D.; Binnie, D.R.; Martin, S.

    1987-01-01

    To maintain consistently high quality in satellite image map production, the U. S. Geological Survey (USGS) has developed standard procedures for the photographic and digital production of Landsat image mosaics, and for lithographic printing of multispectral imagery. This paper gives a brief review of the photographic, digital, and lithographic procedures currently in use for producing image maps from Landsat data. It is shown that consistency in the printing of image maps is achieved by standardizing the materials and procedures that affect the image detail and color balance of the final product. Densitometric standards are established by printing control targets using the pressplates, inks, pre-press proofs, and paper to be used for printing.

  7. MAPS development for the ALICE ITS upgrade

    Science.gov (United States)

    Yang, P.; Aglieri, G.; Cavicchioli, C.; Chalmet, P. L.; Chanlek, N.; Collu, A.; Gao, C.; Hillemanns, H.; Junique, A.; Kofarago, M.; Keil, M.; Kugathasan, T.; Kim, D.; Kim, J.; Lattuca, A.; Marin Tobon, C. A.; Marras, D.; Mager, M.; Martinengo, P.; Mazza, G.; Mugnier, H.; Musa, L.; Puggioni, C.; Rousset, J.; Reidt, F.; Riedler, P.; Snoeys, W.; Siddhanta, S.; Usai, G.; van Hoorne, J. W.; Yi, J.

    2015-03-01

    Monolithic Active Pixel Sensors (MAPS) offer the possibility to build pixel detectors and tracking layers with high spatial resolution and low material budget in commercial CMOS processes. Significant progress has been made in the field of MAPS in recent years, and they are now considered for the upgrades of the LHC experiments. This contribution will focus on MAPS detectors developed for the ALICE Inner Tracking System (ITS) upgrade and manufactured in the TowerJazz 180 nm CMOS imaging sensor process on wafers with a high resistivity epitaxial layer. Several sensor chip prototypes have been developed and produced to optimise both charge collection and readout circuitry. The chips have been characterised using electrical measurements, radioactive sources and particle beams. The tests indicate that the sensors satisfy the ALICE requirements and first prototypes with the final size of 1.5 × 3 cm2 have been produced in the first half of 2014. This contribution summarises the characterisation measurements and presents first results from the full-scale chips.

  8. MAPS development for the ALICE ITS upgrade

    International Nuclear Information System (INIS)

    Yang, P.; Gao, C.; Huang, G.; Aglieri, G.; Cavicchioli, C.; Hillemanns, H.; Junique, A.; Kofarago, M.; Keil, M.; Kugathasan, T.; Tobon, C.A. Marin; Mager, M.; Martinengo, P.; Chalmet, P.L.; Chanlek, N.; Collu, A.; Marras, D.; Kim, D.; Kim, J.; Lattuca, A.

    2015-01-01

    Monolithic Active Pixel Sensors (MAPS) offer the possibility to build pixel detectors and tracking layers with high spatial resolution and low material budget in commercial CMOS processes. Significant progress has been made in the field of MAPS in recent years, and they are now considered for the upgrades of the LHC experiments. This contribution will focus on MAPS detectors developed for the ALICE Inner Tracking System (ITS) upgrade and manufactured in the TowerJazz 180 nm CMOS imaging sensor process on wafers with a high resistivity epitaxial layer. Several sensor chip prototypes have been developed and produced to optimise both charge collection and readout circuitry. The chips have been characterised using electrical measurements, radioactive sources and particle beams. The tests indicate that the sensors satisfy the ALICE requirements and first prototypes with the final size of 1.5 × 3 cm 2 have been produced in the first half of 2014. This contribution summarises the characterisation measurements and presents first results from the full-scale chips

  9. China's Mission in Surveying, Mapping and Geographic Information during Global Governance

    Science.gov (United States)

    Jia, D.; Xue, C.; Chen, X.

    2018-04-01

    In the new era, it is proposed that China should be transformed from a participant and a cooperator into a designer, an impeller and a leader, continue taking an effect of responsible great power, increase public product supply, perfect a global governance system and contribute to China's wisdom and China's schemes during global governance, thus surveying and mapping geographic information takes on great mission. On the one hand, we have to timely grasp global geographic information data resources to provide an important scientific data support for China's wisdom and China's schemes. On the other hand, we have to provide surveying and mapping geographic information infrastructure construction and public products for developing countries, support location services within a global territorial scope, and realize the smoothness of talent flow, material flow and information flow between China and countries in the world. Meanwhile, external assistance and international communication and cooperation of surveying and mapping geographic information are also enhanced, and popularization and application of a geographic information technology in underdeveloped countries and regions are promoted.

  10. 36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

    Science.gov (United States)

    2010-07-01

    ... Well records and reports, plots and maps, samples, tests and surveys. Any technical data gathered... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property...

  11. Analogy Mapping Development for Learning Programming

    Science.gov (United States)

    Sukamto, R. A.; Prabawa, H. W.; Kurniawati, S.

    2017-02-01

    Programming skill is an important skill for computer science students, whereas nowadays, there many computer science students are lack of skills and information technology knowledges in Indonesia. This is contrary with the implementation of the ASEAN Economic Community (AEC) since the end of 2015 which is the qualified worker needed. This study provided an effort for nailing programming skills by mapping program code to visual analogies as learning media. The developed media was based on state machine and compiler principle and was implemented in C programming language. The state of every basic condition in programming were successful determined as analogy visualization.

  12. The Development of Precise Engineering Surveying Technology

    Directory of Open Access Journals (Sweden)

    LI Guangyun

    2017-10-01

    Full Text Available With the construction of big science projects in China, the precise engineering surveying technology developed rapidly in the 21th century. Firstly, the paper summarized up the current development situation for the precise engineering surveying instrument and theory. Then the three typical cases of the precise engineering surveying practice such as accelerator alignment, industry measurement and high-speed railway surveying technology are focused.

  13. NOAA's Shoreline Survey Maps - Raster NOAA-NOS Shoreline Survey Manuscripts that define the shoreline and alongshore natural and man-made features

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOS coastal survey maps (often called t-sheet or tp-sheet maps) are special use planimetric or topographic maps that precisely define the shoreline and alongshore...

  14. Application of terrestrial laser scanning to the development and updating of the base map

    Directory of Open Access Journals (Sweden)

    Klapa Przemysław

    2017-06-01

    Full Text Available The base map provides basic information about land to individuals, companies, developers, design engineers, organizations, and government agencies. Its contents include spatial location data for control network points, buildings, land lots, infrastructure facilities, and topographic features. As the primary map of the country, it must be developed in accordance with specific laws and regulations and be continuously updated. The base map is a data source used for the development and updating of derivative maps and other large scale cartographic materials such as thematic or topographic maps. Thanks to the advancement of science and technology, the quality of land surveys carried out by means of terrestrial laser scanning (TLS matches that of traditional surveying methods in many respects.

  15. THE SLOAN DIGITAL SKY SURVEY REVERBERATION MAPPING PROJECT: TECHNICAL OVERVIEW

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Yue [Carnegie Observatories, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Brandt, W. N. [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA 16802 (United States); Dawson, Kyle S. [Department of Physics and Astronomy, University of Utah, 115 South 1400 East, Salt Lake City, UT 84112 (United States); Hall, Patrick B. [Department of Physics and Astronomy, York University, Toronto, ON M3J 1P3 (Canada); McGreer, Ian D.; Fan, Xiaohui [Steward Observatory, The University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721-0065 (United States); Anderson, Scott F. [Astronomy Department, University of Washington, Box 351580, Seattle, WA 98195 (United States); Chen, Yuguang [Department of Astronomy, School of Physics, Peking University, Beijing 100871 (China); Denney, Kelly D. [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Eftekharzadeh, Sarah [Department of Physics and Astronomy, University of Wyoming, 1000 East University Avenue, Laramie, WY 82071 (United States); Gao, Yang [Department of Engineering Physics and Center for Astrophysics, Tsinghua University, Beijing 100084 (China); Green, Paul J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Greene, Jenny E. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States); Ho, Luis C. [Kavli Institute for Astronomy and Astrophysics, Peking University, Beijing 100871 (China); Horne, Keith [SUPA Physics/Astronomy, University of St. Andrews, St. Andrews KY16 9SS (United Kingdom); Jiang, Linhua [School of Earth and Space Exploration, Arizona State University, Tempe, AZ 85287-1504 (United States); Kelly, Brandon C. [Department of Physics, Broida Hall, University of California, Santa Barbara, CA 93107 (United States); and others

    2015-01-01

    The Sloan Digital Sky Survey Reverberation Mapping (SDSS-RM) project is a dedicated multi-object RM experiment that has spectroscopically monitored a sample of 849 broad-line quasars in a single 7 deg{sup 2} field with the SDSS-III Baryon Oscillation Spectroscopic Survey spectrograph. The RM quasar sample is flux-limited to i {sub psf} = 21.7 mag, and covers a redshift range of 0.1 < z < 4.5 without any other cuts on quasar properties. Optical spectroscopy was performed during 2014 January-July dark/gray time, with an average cadence of ∼4 days, totaling more than 30 epochs. Supporting photometric monitoring in the g and i bands was conducted at multiple facilities including the Canada-France-Hawaii Telescope (CFHT) and the Steward Observatory Bok telescope in 2014, with a cadence of ∼2 days and covering all lunar phases. The RM field (R.A., decl. = 14:14:49.00, +53:05:00.0) lies within the CFHT-LS W3 field, and coincides with the Pan-STARRS 1 (PS1) Medium Deep Field MD07, with three prior years of multi-band PS1 light curves. The SDSS-RM six month baseline program aims to detect time lags between the quasar continuum and broad line region (BLR) variability on timescales of up to several months (in the observed frame) for ∼10% of the sample, and to anchor the time baseline for continued monitoring in the future to detect lags on longer timescales and at higher redshift. SDSS-RM is the first major program to systematically explore the potential of RM for broad-line quasars at z > 0.3, and will investigate the prospects of RM with all major broad lines covered in optical spectroscopy. SDSS-RM will provide guidance on future multi-object RM campaigns on larger scales, and is aiming to deliver more than tens of BLR lag detections for a homogeneous sample of quasars. We describe the motivation, design, and implementation of this program, and outline the science impact expected from the resulting data for RM and general quasar science.

  16. THE SLOAN DIGITAL SKY SURVEY REVERBERATION MAPPING PROJECT: TECHNICAL OVERVIEW

    International Nuclear Information System (INIS)

    Shen, Yue; Brandt, W. N.; Dawson, Kyle S.; Hall, Patrick B.; McGreer, Ian D.; Fan, Xiaohui; Anderson, Scott F.; Chen, Yuguang; Denney, Kelly D.; Eftekharzadeh, Sarah; Gao, Yang; Green, Paul J.; Greene, Jenny E.; Ho, Luis C.; Horne, Keith; Jiang, Linhua; Kelly, Brandon C.

    2015-01-01

    The Sloan Digital Sky Survey Reverberation Mapping (SDSS-RM) project is a dedicated multi-object RM experiment that has spectroscopically monitored a sample of 849 broad-line quasars in a single 7 deg 2 field with the SDSS-III Baryon Oscillation Spectroscopic Survey spectrograph. The RM quasar sample is flux-limited to i psf = 21.7 mag, and covers a redshift range of 0.1 < z < 4.5 without any other cuts on quasar properties. Optical spectroscopy was performed during 2014 January-July dark/gray time, with an average cadence of ∼4 days, totaling more than 30 epochs. Supporting photometric monitoring in the g and i bands was conducted at multiple facilities including the Canada-France-Hawaii Telescope (CFHT) and the Steward Observatory Bok telescope in 2014, with a cadence of ∼2 days and covering all lunar phases. The RM field (R.A., decl. = 14:14:49.00, +53:05:00.0) lies within the CFHT-LS W3 field, and coincides with the Pan-STARRS 1 (PS1) Medium Deep Field MD07, with three prior years of multi-band PS1 light curves. The SDSS-RM six month baseline program aims to detect time lags between the quasar continuum and broad line region (BLR) variability on timescales of up to several months (in the observed frame) for ∼10% of the sample, and to anchor the time baseline for continued monitoring in the future to detect lags on longer timescales and at higher redshift. SDSS-RM is the first major program to systematically explore the potential of RM for broad-line quasars at z > 0.3, and will investigate the prospects of RM with all major broad lines covered in optical spectroscopy. SDSS-RM will provide guidance on future multi-object RM campaigns on larger scales, and is aiming to deliver more than tens of BLR lag detections for a homogeneous sample of quasars. We describe the motivation, design, and implementation of this program, and outline the science impact expected from the resulting data for RM and general quasar science

  17. Can the Future EnMAP Mission Contribute to Urban Applications? A Literature Survey

    Directory of Open Access Journals (Sweden)

    Andreas Müller

    2011-08-01

    Full Text Available With urban populations and their footprints growing globally, the need to assess the dynamics of the urban environment increases. Remote sensing is one approach that can analyze these developments quantitatively with respect to spatially and temporally large scale changes. With the 2015 launch of the spaceborne EnMAP mission, a new hyperspectral sensor with high signal-to-noise ratio at medium spatial resolution, and a 21 day global revisit capability will become available. This paper presents the results of a literature survey on existing applications and image analysis techniques in the context of urban remote sensing in order to identify and outline potential contributions of the future EnMAP mission. Regarding urban applications, four frequently addressed topics have been identified: urban development and planning, urban growth assessment, risk and vulnerability assessment and urban climate. The requirements of four application fields and associated image processing techniques used to retrieve desired parameters and create geo-information products have been reviewed. As a result, we identified promising research directions enabling the use of EnMAP for urban studies. First and foremost, research is required to analyze the spectral information content of an EnMAP pixel used to support material-based land cover mapping approaches. This information can subsequently be used to improve urban indicators, such as imperviousness. Second, we identified the global monitoring of urban areas as a promising field of investigation taking advantage of EnMAP’s spatial coverage and revisit capability. However, owing to the limitations of EnMAPs spatial resolution for urban applications, research should also focus on hyperspectral resolution enhancement to enable retrieving material information on sub-pixel level.

  18. Development of Geospatial Map Based Election Portal

    Science.gov (United States)

    Gupta, A. Kumar Chandra; Kumar, P.; Vasanth Kumar, N.

    2014-11-01

    The Geospatial Delhi Limited (GSDL), a Govt. of NCT of Delhi Company formed in order to provide the geospatial information of National Capital Territory of Delhi (NCTD) to the Government of National Capital Territory of Delhi (GNCTD) and its organs such as DDA, MCD, DJB, State Election Department, DMRC etc., for the benefit of all citizens of Government of National Capital Territory of Delhi (GNCTD). This paper describes the development of Geospatial Map based Election portal (GMEP) of NCT of Delhi. The portal has been developed as a map based spatial decision support system (SDSS) for pertain to planning and management of Department of Chief Electoral Officer, and as an election related information searching tools (Polling Station, Assembly and parliamentary constituency etc.,) for the citizens of NCTD. The GMEP is based on Client-Server architecture model. It has been developed using ArcGIS Server 10.0 with J2EE front-end on Microsoft Windows environment. The GMEP is scalable to enterprise SDSS with enterprise Geo Database & Virtual Private Network (VPN) connectivity. Spatial data to GMEP includes delimited precinct area boundaries of Voters Area of Polling stations, Assembly Constituency, Parliamentary Constituency, Election District, Landmark locations of Polling Stations & basic amenities (Police Stations, Hospitals, Schools and Fire Stations etc.). GMEP could help achieve not only the desired transparency and easiness in planning process but also facilitates through efficient & effective tools for management of elections. It enables a faster response to the changing ground realities in the development planning, owing to its in-built scientific approach and open-ended design.

  19. Specification for the U.S. Geological Survey Historical Topographic Map Collection

    Science.gov (United States)

    Allord, Gregory J.; Walter, Jennifer L.; Fishburn, Kristin A.; Shea, Gale A.

    2014-01-01

    This document provides the detailed requirements for producing, archiving, and disseminating a comprehensive digital collection of topographic maps for the U.S. Geological Survey (USGS) Historical Topographic Map Collection (HTMC). The HTMC is a digital archive of about 190,000 printed topographic maps published by the USGS from the inception of the topographic mapping program in 1884 until the last paper topographic map using lithographic printing technology was published in 2006. The HTMC provides a comprehensive digital repository of all scales and all editions of USGS printed topographic maps that is easily discovered, browsed, and downloaded by the public at no cost. The HTMC provides ready access to maps that are no longer available for distribution in print. A digital file representing the original paper historical topographic map is produced for each historical map in the HTMC in georeferenced PDF (GeoPDF) format (a portable document format [PDF] with a geospatial extension).

  20. Galaxy bias from the Dark Energy Survey Science Verification data: combining galaxy density maps and weak lensing maps

    Energy Technology Data Exchange (ETDEWEB)

    Chang, C.; Pujol, A.; Gaztañaga, E.; Amara, A.; Réfrégier, A.; Bacon, D.; Becker, M. R.; Bonnett, C.; Carretero, J.; Castander, F. J.; Crocce, M.; Fosalba, P.; Giannantonio, T.; Hartley, W.; Jarvis, M.; Kacprzak, T.; Ross, A. J.; Sheldon, E.; Troxel, M. A.; Vikram, V.; Zuntz, J.; Abbott, T. M. C.; Abdalla, F. B.; Allam, S.; Annis, J.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Capozzi, D.; Rosell, A. Carnero; Kind, M. Carrasco; Cunha, C. E.; D' Andrea, C. B.; da Costa, L. N.; Desai, S.; Diehl, H. T.; Dietrich, J. P.; Doel, P.; Eifler, T. F.; Estrada, J.; Evrard, A. E.; Flaugher, B.; Frieman, J.; Goldstein, D. A.; Gruen, D.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; Jain, B.; James, D. J.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Li, T. S.; Lima, M.; Marshall, J. L.; Martini, P.; Melchior, P.; Miller, C. J.; Miquel, R.; Mohr, J. J.; Nichol, R. C.; Nord, B.; Ogando, R.; Plazas, A. A.; Reil, K.; Romer, A. K.; Roodman, A.; Rykoff, E. S.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thomas, D.; Walker, A. R.

    2016-04-15

    We measure the redshift evolution of galaxy bias from a magnitude-limited galaxy sample by combining the galaxy density maps and weak lensing shear maps for a $\\sim$116 deg$^{2}$ area of the Dark Energy Survey (DES) Science Verification data. This method was first developed in Amara et al. (2012) and later re-examined in a companion paper (Pujol et al., in prep) with rigorous simulation tests and analytical treatment of tomographic measurements. In this work we apply this method to the DES SV data and measure the galaxy bias for a magnitude-limited galaxy sample. We find the galaxy bias and 1$\\sigma$ error bars in 4 photometric redshift bins to be 1.33$\\pm$0.18 (z=0.2-0.4), 1.19$\\pm$0.23 (z=0.4-0.6), 0.99$\\pm$0.36 ( z=0.6-0.8), and 1.66$\\pm$0.56 (z=0.8-1.0). These measurements are consistent at the 1-2$\\sigma$ level with mea- surements on the same dataset using galaxy clustering and cross-correlation of galaxies with CMB lensing. In addition, our method provides the only $\\sigma_8$-independent constraint among the three. We forward-model the main observational effects using mock galaxy catalogs by including shape noise, photo-z errors and masking effects. We show that our bias measurement from the data is consistent with that expected from simulations. With the forthcoming full DES data set, we expect this method to provide additional constraints on the galaxy bias measurement from more traditional methods. Furthermore, in the process of our measurement, we build up a 3D mass map that allows further exploration of the dark matter distribution and its relation to galaxy evolution.

  1. 76 FR 77208 - Affirmation of Vertical Datum for Surveying and Mapping Activities for the Islands of St. Croix...

    Science.gov (United States)

    2011-12-12

    ... Datum for Surveying and Mapping Activities for the Islands of St. Croix, St. John, and St. Thomas... datum for surveying and mapping activities for the islands of St. Croix, St. John, and St. Thomas of the... by other Federal surveying and mapping agencies on St. Croix, St. John, and St. Thomas, with the...

  2. Mapping the Risk of Snakebite in Sri Lanka - A National Survey with Geospatial Analysis.

    Directory of Open Access Journals (Sweden)

    Dileepa Senajith Ediriweera

    2016-07-01

    Full Text Available There is a paucity of robust epidemiological data on snakebite, and data available from hospitals and localized or time-limited surveys have major limitations. No study has investigated the incidence of snakebite across a whole country. We undertook a community-based national survey and model based geostatistics to determine incidence, envenoming, mortality and geographical pattern of snakebite in Sri Lanka.The survey was designed to sample a population distributed equally among the nine provinces of the country. The number of data collection clusters was divided among districts in proportion to their population. Within districts clusters were randomly selected. Population based incidence of snakebite and significant envenoming were estimated. Model-based geostatistics was used to develop snakebite risk maps for Sri Lanka. 1118 of the total of 14022 GN divisions with a population of 165665 (0.8%of the country's population were surveyed. The crude overall community incidence of snakebite, envenoming and mortality were 398 (95% CI: 356-441, 151 (130-173 and 2.3 (0.2-4.4 per 100000 population, respectively. Risk maps showed wide variation in incidence within the country, and snakebite hotspots and cold spots were determined by considering the probability of exceeding the national incidence.This study provides community based incidence rates of snakebite and envenoming for Sri Lanka. The within-country spatial variation of bites can inform healthcare decision making and highlights the limitations associated with estimates of incidence from hospital data or localized surveys. Our methods are replicable, and these models can be adapted to other geographic regions after re-estimating spatial covariance parameters for the particular region.

  3. Career Mapping for Professional Development and Succession Planning.

    Science.gov (United States)

    Webb, Tammy; Diamond-Wells, Tammy; Jeffs, Debra

    Career mapping facilitates professional development of nurses by education specialists and nurse managers. On the basis of national Nursing Professional Development Scope and Standards, our education and professional development framework supports the organization's professional practice model and provides a foundation for the professional career map. This article describes development, implementation, and evaluation of the professional career map for nurses at a large children's hospital to support achievement of the nursing strategic goals for succession planning and professional development.

  4. The role of house surveys in geological radon potential mapping

    International Nuclear Information System (INIS)

    Ball, K.

    1997-01-01

    Because radon levels vary widely between apparently identical buildings on the same geological unit, no map can predict the radon level in an individual building. Maps can, however, give the probability that a building in a particular locality is above a threshold of radon concentration such as a reference or action level. The probability may be calculated for a particular building type or for a mixture of building types. In the latter case the probability is in effect an estimate of the proportion of buildings above the threshold level. Alternatively maps can provide estimates of the mean radon levels in buildings by area. Maps showing the geographical variation in probability that new or existing building will exceed a radon reference level are used to prevent excessive exposures to radon. The information may be used in various ways, such as to target information campaigns encouraging measurement of radon levels in homes or to modify regulations for new buildings. The data which are used to provide the estimates of the proportion of buildings above a threshold may be radon measurements results from a sample of buildings, or may be indirect indicators such as ground radium concentrations, emanation coefficients and permeability measurements. Consistency in radon measurement protocols and detailed positional information are prerequisites for mapping radon prone areas based upon house data. Grouping building radon measurements by geological formation and superficial cover can produce radon potential maps which are more spatially accurate than grid square maps and more accurate in estimating numbers of homes affected than mapping based only on measuring geological and pedagogical properties

  5. Developing INFOMAR's Seabed Mapping Data to Support a Sustainable Marine Economy

    Science.gov (United States)

    Judge, M. T.; Guinan, J.

    2016-02-01

    As Ireland's national seabed mapping programme, INFOMAR1 (INtegrated mapping FOr the sustainable development of Ireland's MARine resource) enters its eleventh year it continues to provide pivotal seabed mapping data products, e.g. databases, charts and physical habitat maps to support Ireland's Integrated Marine Plan. The programme, jointly coordinated by the Geological Survey of Ireland and the Marine Institute, has gained a world class reputation for developing seabed mapping technologies, infrastructure and expertise. In the government's current Integrated Marine Plan, the programme's critical role in marine spatial planning enabling infrastructural development, research and education has been cited2. INFOMAR's free data policy supports a thriving maritime economy by promoting easy access to seabed mapping datasets that underpin; maritime safety, security and surveillance, governance, business development, research and technology innovation and infrastructure. The first hydrographic surveys of the national marine mapping programme mapped the extent of Ireland's deepest offshore area, whilst in recent years the focus has been to map the coastal and shallow areas. Targeted coastal areas include 26 bays and 3 priority areas for which specialised equipment, techniques and vessels are required. This talk will discuss how the INFOMAR programme has evolved to address the scientific and technological challenges of seabed mapping across a range of water depths; particularly the challenges associated with addressing inshore data gaps. It will describe how the data converts to bathymetric and geological maps detailing seabed characteristics and habitats. We will expand on how maps are: incorporated into collaborative marine projects such as EMODnet, commercialised to identify marine resources and used as marine decision support tools that drive policy and promote protection of the vastly under discovered marine area.

  6. Concept Maps for Evaluating Learning of Sustainable Development

    Science.gov (United States)

    Shallcross, David C.

    2016-01-01

    Concept maps are used to assess student and cohort learning of sustainable development. The concept maps of 732 first-year engineering students were individually analyzed to detect patterns of learning and areas that were not well understood. Students were given 20 minutes each to prepare a concept map of at least 20 concepts using paper and pen.…

  7. The development of flood map in Malaysia

    Science.gov (United States)

    Zakaria, Siti Fairus; Zin, Rosli Mohamad; Mohamad, Ismail; Balubaid, Saeed; Mydin, Shaik Hussein; MDR, E. M. Roodienyanto

    2017-11-01

    In Malaysia, flash floods are common occurrences throughout the year in flood prone areas. In terms of flood extent, flash floods affect smaller areas but because of its tendency to occur in densely urbanized areas, the value of damaged property is high and disruption to traffic flow and businesses are substantial. However, in river floods especially the river floods of Kelantan and Pahang, the flood extent is widespread and can extend over 1,000 square kilometers. Although the value of property and density of affected population is lower, the damage inflicted by these floods can also be high because the area affected is large. In order to combat these floods, various flood mitigation measures have been carried out. Structural flood mitigation alone can only provide protection levels from 10 to 100 years Average Recurrence Intervals (ARI). One of the economically effective non-structural approaches in flood mitigation and flood management is using a geospatial technology which involves flood forecasting and warning services to the flood prone areas. This approach which involves the use of Geographical Information Flood Forecasting system also includes the generation of a series of flood maps. There are three types of flood maps namely Flood Hazard Map, Flood Risk Map and Flood Evacuation Map. Flood Hazard Map is used to determine areas susceptible to flooding when discharge from a stream exceeds the bank-full stage. Early warnings of incoming flood events will enable the flood victims to prepare themselves before flooding occurs. Properties and life's can be saved by keeping their movable properties above the flood levels and if necessary, an early evacuation from the area. With respect to flood fighting, an early warning with reference through a series of flood maps including flood hazard map, flood risk map and flood evacuation map of the approaching flood should be able to alert the organization in charge of the flood fighting actions and the authority to

  8. Technical Report: Unmanned Helicopter Solution for Survey-Grade Lidar and Hyperspectral Mapping

    Science.gov (United States)

    Kaňuk, Ján; Gallay, Michal; Eck, Christoph; Zgraggen, Carlo; Dvorný, Eduard

    2018-05-01

    Recent development of light-weight unmanned airborne vehicles (UAV) and miniaturization of sensors provide new possibilities for remote sensing and high-resolution mapping. Mini-UAV platforms are emerging, but powerful UAV platforms of higher payload capacity are required to carry the sensors for survey-grade mapping. In this paper, we demonstrate a technological solution and application of two different payloads for highly accurate and detailed mapping. The unmanned airborne system (UAS) comprises a Scout B1-100 autonomously operating UAV helicopter powered by a gasoline two-stroke engine with maximum take-off weight of 75 kg. The UAV allows for integrating of up to 18 kg of a customized payload. Our technological solution comprises two types of payload completely independent of the platform. The first payload contains a VUX-1 laser scanner (Riegl, Austria) and a Sony A6000 E-Mount photo camera. The second payload integrates a hyperspectral push-broom scanner AISA Kestrel 10 (Specim, Finland). The two payloads need to be alternated if mapping with both is required. Both payloads include an inertial navigation system xNAV550 (Oxford Technical Solutions Ltd., United Kingdom), a separate data link, and a power supply unit. Such a constellation allowed for achieving high accuracy of the flight line post-processing in two test missions. The standard deviation was 0.02 m (XY) and 0.025 m (Z), respectively. The intended application of the UAS was for high-resolution mapping and monitoring of landscape dynamics (landslides, erosion, flooding, or crops growth). The legal regulations for such UAV applications in Switzerland and Slovakia are also discussed.

  9. Turning soil survey data into digital soil maps in the Energy Region Eger Research Model Area

    Science.gov (United States)

    Pásztor, László; Dobos, Anna; Kürti, Lívia; Takács, Katalin; Laborczi, Annamária

    2015-04-01

    Agria-Innoregion Knowledge Centre of the Eszterházy Károly College has carried out targeted basic researches in the field of renewable energy sources and climate change in the framework of TÁMOP-4.2.2.A-11/1/KONV project. The project has covered certain issues, which require the specific knowledge of the soil cover; for example: (i) investigation of quantitative and qualitative characteristics of natural and landscape resources; (ii) determination of local amount and characteristics of renewable energy sources; (iii) natural/environmental risk analysis by surveying the risk factors. The Energy Region Eger Research Model Area consists of 23 villages and is located in North-Hungary, at the Western part of Bükkalja. Bükkalja is a pediment surface with erosional valleys and dense river network. The diverse morphology of this area results diversity in soil types and soil properties as well. There was large-scale (1:10,000 and 1:25,000 scale) soil mappings in this area in the 1960's and 1970's which provided soil maps, but with reduced spatial coverage and not with fully functional thematics. To achive the recent tasks (like planning suitable/optimal land-use system, estimating biomass production and development of agricultural and ecomonic systems in terms of sustainable regional development) new survey was planned and carried out by the staff of the College. To map the soils in the study area 10 to 22 soil profiles were uncovered per settlement in 2013 and 2014. Field work was carried out according to the FAO Guidelines for Soil Description and WRB soil classification system was used for naming soils. According to the general goal of soil mapping the survey data had to be spatially extended to regionalize the collected thematic local knowledge related to soil cover. Firstly three thematic maps were compiled by digital soil mapping methods: thickness of topsoil, genetic soil type and rate of surface erosion. High resolution digital elevation model, Earth

  10. A preliminary survey of the National Wetlands Inventory as mapped for the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    Hampton, N.L.; Rope, R.C.; Glennon, J.M.; Moor, K.S.

    1995-02-01

    Approximately 135 areas within the boundaries of the Idaho National Engineering Laboratory (INEL) have been mapped as wetland habitat as part of the United States Fish and Wildlife Service (FWS) National Wetlands Inventory (NWI). A preliminary survey of these wetlands was conducted to examine their general characteristics and status, to provide an estimation of relative ecological importance, to identify additional information needed to complete ecological characterization of important INEL wetlands, and to identify high priority wetland areas on the INEL. The purpose of the survey was to provide information to support the preparation of the Environmental Restoration and Waste Management (ER ampersand WM) Environmental Impact Statement (EIS). Information characterizing general vegetation, hydrology, wildlife use, and archaeology was collected at 105 sample sites on the INEL. Sites representing NWI palustrine, lacustrine, and riverine wetlands (including manmade), and areas unmapped or unclassified by the NWI were included in the sample. The field information was used to develop a preliminary ranking of relative ecological importance for each wetland visited during this survey. Survey limitations are identified

  11. Quantitative map interpretation in regional planning surveys. | J.A. ...

    African Journals Online (AJOL)

    A procedure followed for the quantitative interpretation of maps compiled for regional planning purposes of the Upper Orange catchment-basin is presented. The analyses provided useful figures concerning the distribution of dominant vegetation components and their association with relevant habitat factors. Keywords: ...

  12. Continuing Professional Development in the quantity surveying ...

    African Journals Online (AJOL)

    1991-01-01

    Jan 1, 1991 ... The research established that quantity surveyors regarded handing in their CPD ... Surveying, Walter Sisulu University, PO Box 1421, East London, 5200, South Africa. ... Keywords: Continuing professional development, quantity surveying, perception .... In spite of this opportunity enshrined in the Act, the.

  13. Automated detection of extended sources in radio maps: progress from the SCORPIO survey

    Science.gov (United States)

    Riggi, S.; Ingallinera, A.; Leto, P.; Cavallaro, F.; Bufano, F.; Schillirò, F.; Trigilio, C.; Umana, G.; Buemi, C. S.; Norris, R. P.

    2016-08-01

    Automated source extraction and parametrization represents a crucial challenge for the next-generation radio interferometer surveys, such as those performed with the Square Kilometre Array (SKA) and its precursors. In this paper, we present a new algorithm, called CAESAR (Compact And Extended Source Automated Recognition), to detect and parametrize extended sources in radio interferometric maps. It is based on a pre-filtering stage, allowing image denoising, compact source suppression and enhancement of diffuse emission, followed by an adaptive superpixel clustering stage for final source segmentation. A parametrization stage provides source flux information and a wide range of morphology estimators for post-processing analysis. We developed CAESAR in a modular software library, also including different methods for local background estimation and image filtering, along with alternative algorithms for both compact and diffuse source extraction. The method was applied to real radio continuum data collected at the Australian Telescope Compact Array (ATCA) within the SCORPIO project, a pathfinder of the Evolutionary Map of the Universe (EMU) survey at the Australian Square Kilometre Array Pathfinder (ASKAP). The source reconstruction capabilities were studied over different test fields in the presence of compact sources, imaging artefacts and diffuse emission from the Galactic plane and compared with existing algorithms. When compared to a human-driven analysis, the designed algorithm was found capable of detecting known target sources and regions of diffuse emission, outperforming alternative approaches over the considered fields.

  14. Minerals, lands, and geology for the common defence and general welfare, Volume 3, 1904-1939 : A history of geology in relation to the development of public-land, federal-science, and mapping policies and the development of mineral resources in the United States from the 25th to the 60th year of the U.S. Geological Survey

    Science.gov (United States)

    Rabbitt, Mary C.

    1986-01-01

    Mrs. Rabbitt's third volume covers the years 1904 to 1939, from the beginning of the conservation movement under Theodore Roosevelt to the beginning of World War II. From a national perspective, these were years of great development and change in the use of energy, trouble in the coal industry, and a great expansion in the oil industry. They were also years in which the public perceived for the first time that the Nation's mineral resources are not infinite, and the mineral industry realized its dependence on international trade. In these years, water became an increasingly valuable commodity, and the need for a national mapping program became abundantly evident. These were also the years when the Federal Government for the most part practiced stringent economy in funding science, but State and municipal agencies increasingly sought the services of the Survey's topographic and water specialists to aid in the solution of local problems. The balance maintained between fundamental and practical research during the first 25 years was more than once upset during the next 25 years, but the successful struggle to maintain a significant level of research laid the groundwork for the tremendous expansion in the Survey in the subsequent years.

  15. APPLICATION OF MOBILE LIDAR MAPPING FOR DAMAGE SURVEY AFTER GREAT EAST JAPAN EARTHQUAKE

    Directory of Open Access Journals (Sweden)

    E. Ariyasu

    2012-07-01

    Full Text Available A massive earthquake of magnitude 9.0 hit off Tohoku region, the east coast of the Japanese main land, on 11 March, 2011. It was one of the historically powerful earthquakes in the world. The earthquake triggered powerful tsunami and broad-scale subsidence, so that, residential areas and infrastructures were catastrophically damaged. After that, it is necessary to renew a new map for reconstruction, such as cadastral map. In the critical situation, Mobile LiDAR Mapping system is efficient to rapidly collect fine data at once and capture more details of terrain features than data from airborne. In this paper, we would like to introduce procured instruments in our company and implemented survey several areas after the event, and suggest how to survey for cadastral map by Mobile LiDAR Mapping System.

  16. Development of an Intervention Map for a Parent Education Intervention to Prevent Violence Among Hispanic Middle School Students.

    Science.gov (United States)

    Murray, Nancy; Kelder, Steve; Parcel, Guy; Orpinas, Pamela

    1998-01-01

    Describes development of an intervention program for Hispanic parents to reduce violence by increased monitoring of their middle school students. Program development used a five-step guided intervention mapping process. Student surveys and parent interviews provided data to inform program design. Intervention mapping ensured involvement with the…

  17. MAPPING THE GALAXY COLOR–REDSHIFT RELATION: OPTIMAL PHOTOMETRIC REDSHIFT CALIBRATION STRATEGIES FOR COSMOLOGY SURVEYS

    Energy Technology Data Exchange (ETDEWEB)

    Masters, Daniel; Steinhardt, Charles; Faisst, Andreas [Infrared Processing and Analysis Center, California Institute of Technology, Pasadena, CA 91125 (United States); Capak, Peter [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); Stern, Daniel; Rhodes, Jason [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Ilbert, Olivier [Aix Marseille Universite, CNRS, LAM (Laboratoire dAstrophysique de Marseille) UMR 7326, F-13388, Marseille (France); Salvato, Mara [Max-Planck-Institut für extraterrestrische Physik, Giessenbachstrasse, D-85748 Garching (Germany); Schmidt, Samuel [Department of Physics, University of California, Davis, CA 95616 (United States); Longo, Giuseppe [Department of Physics, University Federico II, via Cinthia 6, I-80126 Napoli (Italy); Paltani, Stephane; Coupon, Jean [Department of Astronomy, University of Geneva ch. dcogia 16, CH-1290 Versoix (Switzerland); Mobasher, Bahram [Department of Physics and Astronomy, University of California, Riverside, CA 92521 (United States); Hoekstra, Henk [Leiden Observatory, Leiden University, P.O. Box 9513, 2300 RA, Leiden (Netherlands); Hildebrandt, Hendrik [Argelander-Institut für Astronomie, Universität Bonn, Auf dem H’´ugel 71, D-53121 Bonn (Germany); Speagle, Josh [Department of Astronomy, Harvard University, 60 Garden Street, MS 46, Cambridge, MA 02138 (United States); Kalinich, Adam [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Brodwin, Mark [Department of Physics and Astronomy, University of Missouri, Kansas City, MO 64110 (United States); Brescia, Massimo; Cavuoti, Stefano [Astronomical Observatory of Capodimonte—INAF, via Moiariello 16, I-80131, Napoli (Italy)

    2015-11-01

    Calibrating the photometric redshifts of ≳10{sup 9} galaxies for upcoming weak lensing cosmology experiments is a major challenge for the astrophysics community. The path to obtaining the required spectroscopic redshifts for training and calibration is daunting, given the anticipated depths of the surveys and the difficulty in obtaining secure redshifts for some faint galaxy populations. Here we present an analysis of the problem based on the self-organizing map, a method of mapping the distribution of data in a high-dimensional space and projecting it onto a lower-dimensional representation. We apply this method to existing photometric data from the COSMOS survey selected to approximate the anticipated Euclid weak lensing sample, enabling us to robustly map the empirical distribution of galaxies in the multidimensional color space defined by the expected Euclid filters. Mapping this multicolor distribution lets us determine where—in galaxy color space—redshifts from current spectroscopic surveys exist and where they are systematically missing. Crucially, the method lets us determine whether a spectroscopic training sample is representative of the full photometric space occupied by the galaxies in a survey. We explore optimal sampling techniques and estimate the additional spectroscopy needed to map out the color–redshift relation, finding that sampling the galaxy distribution in color space in a systematic way can efficiently meet the calibration requirements. While the analysis presented here focuses on the Euclid survey, similar analysis can be applied to other surveys facing the same calibration challenge, such as DES, LSST, and WFIRST.

  18. Groundwater discharge mapping at Altnabreac by thermal infrared linescan surveying

    International Nuclear Information System (INIS)

    Brereton, N.R.; Hall, D.H.

    1983-07-01

    A thermal infra-red linescan survey has been carried out of the area around Altnabreac, Caithness. The objectives of the survey were: to assess the applicability of the technique to the location of springs discharging from peat covered crystalline rocks; to provide the locations of springs for a subsequent geochemical sampling programme; and to gain clearer understanding of the ground water circulation patterns in the area. The number and distribution of springs located by the survey has proved to be far greater than had been previously anticipated and the capabilities of the technique have been clearly demonstrated. The results, together with other geochemical and hydrogeological data, indicate that the majority of the springs represent near surface recent groundwaters circulating within the moraine deposits and weathered granite. (author)

  19. Application of terrestrial laser scanning to the development and updating of the base map

    Science.gov (United States)

    Klapa, Przemysław; Mitka, Bartosz

    2017-06-01

    The base map provides basic information about land to individuals, companies, developers, design engineers, organizations, and government agencies. Its contents include spatial location data for control network points, buildings, land lots, infrastructure facilities, and topographic features. As the primary map of the country, it must be developed in accordance with specific laws and regulations and be continuously updated. The base map is a data source used for the development and updating of derivative maps and other large scale cartographic materials such as thematic or topographic maps. Thanks to the advancement of science and technology, the quality of land surveys carried out by means of terrestrial laser scanning (TLS) matches that of traditional surveying methods in many respects. This paper discusses the potential application of output data from laser scanners (point clouds) to the development and updating of cartographic materials, taking Poland's base map as an example. A few research sites were chosen to present the method and the process of conducting a TLS land survey: a fragment of a residential area, a street, the surroundings of buildings, and an undeveloped area. The entire map that was drawn as a result of the survey was checked by comparing it to a map obtained from PODGiK (pol. Powiatowy Ośrodek Dokumentacji Geodezyjnej i Kartograficznej - Regional Centre for Geodetic and Cartographic Records) and by conducting a field inspection. An accuracy and quality analysis of the conducted fieldwork and deskwork yielded very good results, which provide solid grounds for predicating that cartographic materials based on a TLS point cloud are a reliable source of information about land. The contents of the map that had been created with the use of the obtained point cloud were very accurately located in space (x, y, z). The conducted accuracy analysis and the inspection of the performed works showed that high quality is characteristic of TLS surveys. The

  20. Digital Technology in the protection of cultural heritage Bao Fan Temple mural digital mapping survey

    Directory of Open Access Journals (Sweden)

    Y. Zheng

    2015-08-01

    Full Text Available Peng Xi county, Sichuan province, the Bao Fan temple mural digitization survey mapping project: we use three-dimensional laserscanning, multi-baseline definition digital photography, multi-spectral digital image acquisition and other technologies for digital survey mapping. The purpose of this project is to use modern mathematical reconnaissance mapping means to obtain accurate mural shape, color, quality and other data. Combined with field investigation and laboratory analysis results, and based on a comprehensive survey and study, a comprehensive analysis of the historical Bao Fan Temple mural artistic and scientific value was conducted. A study of the mural’s many qualities (structural, material, technique, preservation environment, degradation, etc. reveal all aspects of the information carried by the Bao Fan Temple mural. From multiple angles (archeology, architecture, surveying, conservation science and other disciplines an assessment for the Bao Fan Temple mural provides basic data and recommendations for conservation of the mural. In order to achieve the conservation of cultural relics in the Bao Fan Temple mural digitization survey mapping process, we try to apply the advantages of three-dimensional laser scanning equipment. For wall murals this means obtaining three-dimensional scale data from the scan of the building and through the analysis of these data to help determine the overall condition of the settlement as well as the deformation of the wall structure. Survey analysis provides an effective set of conclusions and suggestions for appropriate mural conservation. But before data collection, analysis and research need to first to select the appropriate scanning equipment, set the appropriate scanning accuracy and layout position of stations necessary to determine the scope of required data. We use the fine features of the three-dimensional laser scanning measuring arm to scan the mural surface deformation degradation to reflect

  1. Digital Technology in the protection of cultural heritage Bao Fan Temple mural digital mapping survey

    Science.gov (United States)

    Zheng, Y.

    2015-08-01

    Peng Xi county, Sichuan province, the Bao Fan temple mural digitization survey mapping project: we use three-dimensional laserscanning, multi-baseline definition digital photography, multi-spectral digital image acquisition and other technologies for digital survey mapping. The purpose of this project is to use modern mathematical reconnaissance mapping means to obtain accurate mural shape, color, quality and other data. Combined with field investigation and laboratory analysis results, and based on a comprehensive survey and study, a comprehensive analysis of the historical Bao Fan Temple mural artistic and scientific value was conducted. A study of the mural's many qualities (structural, material, technique, preservation environment, degradation, etc.) reveal all aspects of the information carried by the Bao Fan Temple mural. From multiple angles (archeology, architecture, surveying, conservation science and other disciplines) an assessment for the Bao Fan Temple mural provides basic data and recommendations for conservation of the mural. In order to achieve the conservation of cultural relics in the Bao Fan Temple mural digitization survey mapping process, we try to apply the advantages of three-dimensional laser scanning equipment. For wall murals this means obtaining three-dimensional scale data from the scan of the building and through the analysis of these data to help determine the overall condition of the settlement as well as the deformation of the wall structure. Survey analysis provides an effective set of conclusions and suggestions for appropriate mural conservation. But before data collection, analysis and research need to first to select the appropriate scanning equipment, set the appropriate scanning accuracy and layout position of stations necessary to determine the scope of required data. We use the fine features of the three-dimensional laser scanning measuring arm to scan the mural surface deformation degradation to reflect the actual state of

  2. Surveying the skies how astronomers map the universe

    CERN Document Server

    Wynn-Williams, Gareth

    2016-01-01

    Since the time of Galileo, astronomy has been driven by technological innovation. With each major advance has come the opportunity and enthusiasm to survey the sky in a way that was not possible before. It is these surveys of discovery that are the subject of this book. In the first few chapters the author discusses what astronomers learned from visible-light surveys, first with the naked eye, then using telescopes in the seventeenth century, and photography in the nineteenth century. He then moves to the second half of the twentieth century when the skies started to be swept by radio, infrared, ultraviolet, x-ray and gamma ray telescopes, many of which had to be flown in satellites above the Earth’s atmosphere. These surveys led to the discovery of pulsars, quasars, molecular clouds, protostars, bursters, and black holes. He then returns to Earth to describe several currently active large-scale projects that methodically collect images, photometry and spectra that are then stored in vast publicly-accessibl...

  3. Creation of next generation U.S. Geological Survey topographic maps

    Science.gov (United States)

    Craun, Kari J.

    2010-01-01

    The U.S. Geological Survey (USGS) is 2 years into a 3-year cycle to create new digital topographic map products for the conterminous United States from data acquired and maintained as part of The National Map databases. These products are in the traditional, USGS topographic quadrangle, 7.5-minute (latitude and longitude) cell format. The 3-year cycle was conceived to follow the acquisition of National Aerial Imagery Program (NAIP) orthorectified imagery, a key layer in the new product. In fiscal year (FY) 2009 (ending September 30, 2009), the first year of the 3-year cycle, the USGS produced 13,200 products. These initial products of the “Digital MapBeta” series had limited feature content, including only the NAIP image, some roads, geographic names, and grid and collar information. The products were created in layered georegistered Portable Document Format (PDF) files, allowing users with freely available Adobe® Reader® software to view, print, and perform simple Geographic Information System-like functions. In FY 2010 (ending September 30, 2010), the USGS produced 20,380 products. These products of the “US Topo” series added hydrography (surface water features), contours, and some boundaries. In FY 2011 (ending September 30, 2011), the USGS will complete the initial coverage with US Topo products and will add additional feature content to the maps. The design, development, and production associated with the US Topo products provide management and technical challenges for the USGS and its public and private sector partners. One challenge is the acquisition and maintenance of nationally consistent base map data from multiple sources. Another is the use of these data to create a consistent, current series of cartographic products that can be used by the broad spectrum of traditional topographic map users. Although the USGS and its partners have overcome many of these challenges, many, such as establishing and funding a sustainable base data

  4. Principles of survey development for telemedicine applications.

    Science.gov (United States)

    Demiris, George

    2006-01-01

    Surveys can be used in the evaluation of telemedicine applications but they must be properly designed, consistent and accurate. The purpose of the survey and the resources available will determine the extent of testing that a survey instrument should undergo prior to its use. The validity of an instrument is the correspondence between what is being measured and what was intended to be measured. The reliability of an instrument describes the 'consistency' or 'repeatability' of the measurements made with it. Survey instruments should be designed and tested following basic principles of survey development. The actual survey administration also requires consideration, for example data collection and processing, as well as the interpretation of the findings. Surveys are of two different types. Either they are self-administered, or they are administered by interview. In the latter case, they may be administered by telephone or in a face-to-face meeting. It is important to design a survey instrument based on a detailed definition of what it intends to measure and to test it before administering it to the larger sample.

  5. Mapping telemedicine efforts: surveying regional initiatives in Denmark.

    Science.gov (United States)

    Kierkegaard, Patrick

    2015-05-01

    The aim of this study is to survey telemedicine services currently in operation across Denmark. The study specifically seeks to answer the following questions: What initiatives are deployed within the different regions? What are the motivations behind the projects? What technologies are being utilized? What medical disciplines are being supported using telemedicine systems? All data were surveyed from the Telemedicinsk Landkort, a newly created database designed to provide a comprehensive and systematic overview of all telemedicine technologies in Denmark. The results of this study suggest that a growing numbers of telemedicine initiatives are currently in operation across Denmark but that considerable variations exist in terms of regional efforts as the number of operational telemedicine projects varied from region to region. The results of this study provide a timely picture of the factors that are shaping the telemedicine landscape of Denmark and suggest potential strategies to help policymakers increase and improve national telemedicine deployment.

  6. Mapping performance of the fishery industries innovation: A survey in the North Coast of Java

    Science.gov (United States)

    Yusuf, M.; Legowo, A. M.; Albaarri, A. N.; Darmanto, Y. S.; Agustini, T. W.; Setyastuti, A. I.

    2018-01-01

    This study aimed to put the performance indicators of industry innovation fisheries which would be used as inputs to create innovation strategies in order to win the market competition, especially in USA. Survey and in-depth interviews were conducted on 10 industries with shrimp, tuna and crab commodities representing the fishery industry in Indonesia to USA export destination. The result of mapping performance of innovation indicators of Indonesian Fishery Industry resulted the 10’s strategies alternative to win the market. Based on survey result indicate that “the regulation of catch and/or harvest of cultivation factor” is considered the weakest factor in develop innovation with a score of 3.3, while the international trade factor are considered as the strongest factor in developing innovation development with scores 5,0. Aggressive strategy by strengthening the strength owned by the internal industry was by always looking at the opportunity, so that they could take the opportunity to win the market competition at the right time.

  7. UAV MULTISPECTRAL SURVEY TO MAP SOIL AND CROP FOR PRECISION FARMING APPLICATIONS

    Directory of Open Access Journals (Sweden)

    G. Sona

    2016-06-01

    Full Text Available New sensors mounted on UAV and optimal procedures for survey, data acquisition and analysis are continuously developed and tested for applications in precision farming. Procedures to integrate multispectral aerial data about soil and crop and ground-based proximal geophysical data are a recent research topic aimed to delineate homogeneous zones for the management of agricultural inputs (i.e., water, nutrients. Multispectral and multitemporal orthomosaics were produced over a test field (a 100 m x 200 m plot within a maize field, to map vegetation and soil indices, as well as crop heights, with suitable ground resolution. UAV flights were performed in two moments during the crop season, before sowing on bare soil, and just before flowering when maize was nearly at the maximum height. Two cameras, for color (RGB and false color (NIR-RG images, were used. The images were processed in Agisoft Photoscan to produce Digital Surface Model (DSM of bare soil and crop, and multispectral orthophotos. To overcome some difficulties in the automatic searching of matching points for the block adjustment of the crop image, also the scientific software developed by Politecnico of Milan was used to enhance images orientation. Surveys and image processing are described, as well as results about classification of multispectral-multitemporal orthophotos and soil indices.

  8. Professional development strategies for teaching urban biology teachers to use concept maps effectively

    Science.gov (United States)

    McGregor Petgrave, Dahlia M.

    Many teachers are not adequately prepared to help urban students who have trouble understanding conceptual ideas in biology because these students have little connection to the natural world. This study explored potential professional development strategies to help urban biology teachers use concept maps effectively with various topics in the biology curriculum. A grounded theory approach was used to develop a substantive professional development model for urban biology teachers. Qualitative data were collected through 16 semi-structured interviews of professional developers experienced in working with concept maps in the urban context. An anonymous online survey was used to collect quantitative data from 56 professional developers and teachers to support the qualitative data. The participants were from New York City, recruited through the NY Biology-Chemistry Professional Development Mentor Network and the NY Biology Teachers' Association. According to the participants, map construction, classroom applications, lesson planning, action research, follow-up workshops, and the creation of learning communities are the most effective professional development strategies. The interviewees also proposed English language learning strategies such as picture maps, native word maps, and content reading materials with underlined words. This study contributes to social change by providing a professional development model to use in planning workshops for urban teachers. Urban teachers improve their own conceptual understanding of biology while learning how to implement concept mapping strategies in the classroom. Students whose teachers are better prepared to teach biology in a conceptual manner have the potential of growing into more scientifically literate citizens.

  9. Development Of Rainfall Erosivity Map For Nigeria | Ogedengbe ...

    African Journals Online (AJOL)

    The indices were used to develop a rainfall erosivity map or Nigeria. The map reveals that Nigeria may be broadly divided into five major erosion risk zones. The south-western part is generally in the low erosion zone, with the exception of the coastal portion of Lagos, Ondo, Edo and Delta states. The south-east and central ...

  10. A method for mapping corn using the US Geological Survey 1992 National Land Cover Dataset

    Science.gov (United States)

    Maxwell, S.K.; Nuckols, J.R.; Ward, M.H.

    2006-01-01

    Long-term exposure to elevated nitrate levels in community drinking water supplies has been associated with an elevated risk of several cancers including non-Hodgkin's lymphoma, colon cancer, and bladder cancer. To estimate human exposure to nitrate, specific crop type information is needed as fertilizer application rates vary widely by crop type. Corn requires the highest application of nitrogen fertilizer of crops grown in the Midwest US. We developed a method to refine the US Geological Survey National Land Cover Dataset (NLCD) (including map and original Landsat images) to distinguish corn from other crops. Overall average agreement between the resulting corn and other row crops class and ground reference data was 0.79 kappa coefficient with individual Landsat images ranging from 0.46 to 0.93 kappa. The highest accuracies occurred in Regions where corn was the single dominant crop (greater than 80.0%) and the crop vegetation conditions at the time of image acquisition were optimum for separation of corn from all other crops. Factors that resulted in lower accuracies included the accuracy of the NLCD map, accuracy of corn areal estimates, crop mixture, crop condition at the time of Landsat overpass, and Landsat scene anomalies.

  11. DESIGN AND PRACTICE ON METADATA SERVICE SYSTEM OF SURVEYING AND MAPPING RESULTS BASED ON GEONETWORK

    Directory of Open Access Journals (Sweden)

    Z. Zha

    2012-08-01

    Full Text Available Based on the analysis and research on the current geographic information sharing and metadata service,we design, develop and deploy a distributed metadata service system based on GeoNetwork covering more than 30 nodes in provincial units of China.. By identifying the advantages of GeoNetwork, we design a distributed metadata service system of national surveying and mapping results. It consists of 31 network nodes, a central node and a portal. Network nodes are the direct system metadata source, and are distributed arround the country. Each network node maintains a metadata service system, responsible for metadata uploading and management. The central node harvests metadata from network nodes using OGC CSW 2.0.2 standard interface. The portal shows all metadata in the central node, provides users with a variety of methods and interface for metadata search or querying. It also provides management capabilities on connecting the central node and the network nodes together. There are defects with GeoNetwork too. Accordingly, we made improvement and optimization on big-amount metadata uploading, synchronization and concurrent access. For metadata uploading and synchronization, by carefully analysis the database and index operation logs, we successfully avoid the performance bottlenecks. And with a batch operation and dynamic memory management solution, data throughput and system performance are significantly improved; For concurrent access, , through a request coding and results cache solution, query performance is greatly improved. To smoothly respond to huge concurrent requests, a web cluster solution is deployed. This paper also gives an experiment analysis and compares the system performance before and after improvement and optimization. Design and practical results have been applied in national metadata service system of surveying and mapping results. It proved that the improved GeoNetwork service architecture can effectively adaptive for

  12. Archaeological field survey automation: concurrent multisensor site mapping and automated analysis

    Science.gov (United States)

    Józefowicz, Mateusz; Sokolov, Oleksandr; Meszyński, Sebastian; Siemińska, Dominika; Kołosowski, Przemysław

    2016-04-01

    ABM SE develops mobile robots (rovers) used for analog research of Mars exploration missions. The rovers are all-terrain exploration platforms, carrying third-party payloads: scientific instrumentation. "Wisdom" ground penetrating radar for Exomars mission has been tested onboard, as well as electrical resistivity module and other devices. Robot has operated in various environments, such as Central European countryside, Dachstein ice caves or Sahara, Morocco (controlled remotely via satellite from Toruń, Poland. Currently ABM SE works on local and global positioning system for a Mars rover basing on image and IMU data. This is performed under a project from ESA. In the next Mars rover missions a Mars GIS model will be build, including an acquired GPR profile, DEM and regular image data, integrated into a concurrent 3D terrain model. It is proposed to use similar approach in surveys of archaeological sites, especially those, where solid architecture remains can be expected at shallow depths or being partially exposed. It is possible to deploy a rover that will concurrently map a selected site with GPR, 2D and 3D cameras to create a site model. The rover image processing algorithms are capable of automatic tracing of distinctive features (such as exposed structure remains on a desert ground, differences in color of the ground, etc.) and to mark regularities on a created map. It is also possible to correlate the 3D map with an aerial photo taken under any angle to achieve interpretation synergy. Currently the algorithms are an interpretation aid and their results must be confirmed by a human. The advantages of a rover over traditional approaches, such as a manual cart or a drone include: a) long hours of continuous work or work in unfavorable environment, such as high desert, frozen water pools or large areas, b) concurrent multisensory data acquisition, c) working from the ground level enables capturing of sites obstructed from the air (trees), d) it is possible to

  13. Continuing Professional Development in the quantity surveying ...

    African Journals Online (AJOL)

    This research study was conducted in order to investigate Continuing Professional Development (CPD) in the South African quantity surveying profession. The study further aimed to establish the reasons why some quantity surveyors do not acquire the required CPD hours and face losing their professional registration with ...

  14. Recent developments in the theory of separately holomorphic mappings

    International Nuclear Information System (INIS)

    Viet-Anh Nguyen; vietanh 1974@yahoo.fr

    2007-07-01

    We describe a part of the recent developments in the theory of separately holomorphic mappings between complex analytic spaces. Our description focuses on works using the technique of holomorphic discs. (author)

  15. Starting and developing a surveying business

    CERN Document Server

    Imber, Austen

    2013-01-01

    Starting and Developing a Surveying Business shows how surveyors can develop their own successful small business. For surveyors thinking of taking this step, guidance is provided on the pros and cons which will help the right decision to be made, and the key factors which help see the business through its early stages. For surveyors already running their own small business, consideration is given to factors which will help profitability and growth potential.

  16. Developing Coastal Surface Roughness Maps Using ASTER and QuickBird Data Sources

    Science.gov (United States)

    Spruce, Joe; Berglund, Judith; Davis, Bruce

    2006-01-01

    This viewgraph presentation regards one element of a larger project on the integration of NASA science models and data into the Hazards U.S. Multi-Hazard (HAZUS-MH) Hurricane module for hurricane damage and loss risk assessment. HAZUS-MH is a decision support tool being developed by the National Institute of Building Sciences for the Federal Emergency Management Agency (FEMA). It includes the Hurricane Module, which employs surface roughness maps made from National Land Cover Data (NLCD) maps to estimate coastal hurricane wind damage and loss. NLCD maps are produced and distributed by the U.S. Geological Survey. This presentation discusses an effort to improve upon current HAZUS surface roughness maps by employing ASTER multispectral classifications with QuickBird "ground reference" imagery.

  17. Map it @ WSU: Development of a Library Mapping System for Large Academic Libraries

    Directory of Open Access Journals (Sweden)

    Paul Gallagher

    2010-06-01

    Full Text Available The Wayne State Library System launched its library mapping application in February 2010, designed to help locate materials in the five WSU libraries. The system works within the catalog to show the location of materials, as well as provides a web form for use at the reference desk. Developed using PHP and MySQL, it requires only minimal effort to update using a unique call number overlay mechanism. In addition to mapping shelved materials, the system provides information for any of the over three hundred collections held by the WSU Libraries. Patrons can do more than just locate a book on a shelf: they can learn where to locate reserve items, how to access closed collections, or get driving maps to extension center libraries. The article includes a discussion of the technology reviewed and chosen during development, an overview of the system architecture, and lessons learned during development.

  18. Development and evaluation of a specialized task taxonomy for spatial planning - A map literacy experiment with topographic maps

    Science.gov (United States)

    Rautenbach, Victoria; Coetzee, Serena; Çöltekin, Arzu

    2017-05-01

    Topographic maps are among the most commonly used map types, however, their complex and information-rich designs depicting natural, human-made and cultural features make them difficult to read. Regardless of their complexity, spatial planners make extensive use of topographic maps in their work. On the other hand, various studies suggest that map literacy among the development planning professionals in South Africa is not very high. The widespread use of topographic maps combined with the low levels of map literacy presents challenges for effective development planning. In this paper we address some of these challenges by developing a specialized task taxonomy based on systematically assessed map literacy levels; and conducting an empirical experiment with topographic maps to evaluate our task taxonomy. In such empirical studies if non-realistic tasks are used, the results of map literacy tests may be skewed. Furthermore, experience and familiarity with the studied map type play a role in map literacy. There is thus a need to develop map literacy tests aimed at planners specifically. We developed a taxonomy of realistic map reading tasks typically executed during the planning process. The taxonomy defines six levels tasks of increasing difficulty and complexity, ranging from recognising symbols to extracting knowledge. We hypothesized that competence in the first four levels indicates functional map literacy. In this paper, we present results from an empirical experiment with 49 map literate participants solving a subset of tasks from the first four levels of the taxonomy with a topographic map. Our findings suggest that the proposed taxonomy is a good reference for evaluating topographic map literacy. Participants solved the tasks on all four levels as expected and we therefore conclude that the experiment based on the first four levels of the taxonomy successfully determined the functional map literacy of the participants. We plan to continue the study for the

  19. A methodology for small scale rural land use mapping in semi-arid developing countries using orbital imagery. Part 4: Review of land use surveys using orbital imagery outside of the USA

    Science.gov (United States)

    Vangenderen, J. L. (Principal Investigator); Lock, B. F.

    1976-01-01

    The author has identified the following significant results. Outside the U.S., various attempts were made to investigate the feasibility of utilizing orbital MSS imagery in the production of small scale land use maps. Overall, these studies are not as elaborate or extensive in their scope as the U.S. ones, and generally the non-U.S. investigators have employed nonsophisticated and less expensive techniques. A representative range of studies is presented to demonstrate the approaches and trends dealing with reprocessing, interpretation, classification, sampling, and ground truth procedures.

  20. Developing web map application based on user centered design

    Directory of Open Access Journals (Sweden)

    Petr Voldan

    2012-03-01

    Full Text Available User centred design is an approach in process of development any kind of human product where the main idea is to create a product for the end user. This article presents User centred design method in developing web mapping services. This method can be split into four main phases – user research, creation of concepts, developing with usability research and lunch of product. The article describes each part of this phase with an aim to provide guidelines for developers and primarily with an aim to improve the usability of web mapping services.

  1. Bringing Together Users and Developers of Forest Biomass Maps

    Science.gov (United States)

    Brown, Molly Elizabeth; Macauley, Molly K.

    2012-01-01

    Forests store carbon and thus represent important sinks for atmospheric carbon dioxide. Reducing uncertainty in current estimates of the amount of carbon in standing forests will improve precision of estimates of anthropogenic contributions to carbon dioxide in the atmosphere due to deforestation. Although satellite remote sensing has long been an important tool for mapping land cover, until recently aboveground forest biomass estimates have relied mostly on systematic ground sampling of forests. In alignment with fiscal year 2010 congressional direction, NASA has initiated work toward a carbon monitoring system (CMS) that includes both maps of forest biomass and total carbon flux estimates. A goal of the project is to ensure that the products are useful to a wide community of scientists, managers, and policy makers, as well as to carbon cycle scientists. Understanding the needs and requirements of these data users is helpful not just to the NASA CMS program but also to the entire community working on carbon-related activities. To that end, this meeting brought together a small group of natural resource managers and policy makers who use information on forests in their work with NASA scientists who are working to create aboveground forest biomass maps. These maps, derived from combining remote sensing and ground plots, aim to be more accurate than current inventory approaches when applied at local and regional scales. Meeting participants agreed that users of biomass information will look to the CMS effort not only to provide basic data for carbon or biomass measurements but also to provide data to help serve a broad range of goals, such as forest watershed management for water quality, habitat management for biodiversity and ecosystem services, and potential use for developing payments for ecosystem service projects. Participants also reminded the CMS group that potential users include not only public sector agencies and nongovernmental organizations but also the

  2. Developing scholarly thinking using mind maps in graduate nursing education.

    Science.gov (United States)

    Kotcherlakota, Suhasini; Zimmerman, Lani; Berger, Ann M

    2013-01-01

    Two broad issues that beginning graduate nursing students face are identifying a research focus and learning how to organize complex information. Developing a mind map is 1 strategy to help students clarify their thinking and lay the foundation for in-depth expertise related to their research focus, review of the literature, and conceptual framework. The authors discuss their use of mind mapping combined with feedback using a fishbowl technique.

  3. Map of CCAA programming | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2011-01-06

    Jan 6, 2011 ... While developed countries must cut greenhouse gas emissions to limit the dangerous impacts of climate change, it is already too late to stop the changes already in motion in the Earth's atmosphere and oceans. Africa has no choice but to adapt to a hotter, mainly drier, and increasingly unpredictable ...

  4. Site map | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    Livestock Vaccine Innovation Fund · Open Data for Development · Safe and Inclusive Cities · Science Granting Councils Initiative in Sub-Saharan Africa · Think Tank Initiative · Funding · Graduate Student Awards · Grants · Subscribe to funding alerts · In their own words: IDRC awardees share their experiences · Resources.

  5. Geophysical mapping of the subsurface to support climate adaption in development areas

    DEFF Research Database (Denmark)

    Andersen, Theis Raaschou

    ha is high-densely mapped with multi-configuration Ground Conductivity Meter (DualEM421) and supplemented with Airborne Electro Magnetic surveys, Electrical Resistivity Tomography (ERT) and boreholes. The depth of investigation for the DUALEM421 system is between 5 to 8 m and the horizontal...... correlation between the deposits’ electric resistivity and the infiltration capabilities. Based on the soil types’ different infiltration capabilities, it will be possible to produce a detailed infiltration potential map for the development areas. The project is conducted in collaboration with Horsens...

  6. Wide-Field Lensing Mass Maps from Dark Energy Survey Science Verification Data.

    Science.gov (United States)

    Chang, C; Vikram, V; Jain, B; Bacon, D; Amara, A; Becker, M R; Bernstein, G; Bonnett, C; Bridle, S; Brout, D; Busha, M; Frieman, J; Gaztanaga, E; Hartley, W; Jarvis, M; Kacprzak, T; Kovács, A; Lahav, O; Lin, H; Melchior, P; Peiris, H; Rozo, E; Rykoff, E; Sánchez, C; Sheldon, E; Troxel, M A; Wechsler, R; Zuntz, J; Abbott, T; Abdalla, F B; Allam, S; Annis, J; Bauer, A H; Benoit-Lévy, A; Brooks, D; Buckley-Geer, E; Burke, D L; Capozzi, D; Carnero Rosell, A; Carrasco Kind, M; Castander, F J; Crocce, M; D'Andrea, C B; Desai, S; Diehl, H T; Dietrich, J P; Doel, P; Eifler, T F; Evrard, A E; Fausti Neto, A; Flaugher, B; Fosalba, P; Gruen, D; Gruendl, R A; Gutierrez, G; Honscheid, K; James, D; Kent, S; Kuehn, K; Kuropatkin, N; Maia, M A G; March, M; Martini, P; Merritt, K W; Miller, C J; Miquel, R; Neilsen, E; Nichol, R C; Ogando, R; Plazas, A A; Romer, A K; Roodman, A; Sako, M; Sanchez, E; Sevilla, I; Smith, R C; Soares-Santos, M; Sobreira, F; Suchyta, E; Tarle, G; Thaler, J; Thomas, D; Tucker, D; Walker, A R

    2015-07-31

    We present a mass map reconstructed from weak gravitational lensing shear measurements over 139  deg2 from the Dark Energy Survey science verification data. The mass map probes both luminous and dark matter, thus providing a tool for studying cosmology. We find good agreement between the mass map and the distribution of massive galaxy clusters identified using a red-sequence cluster finder. Potential candidates for superclusters and voids are identified using these maps. We measure the cross-correlation between the mass map and a magnitude-limited foreground galaxy sample and find a detection at the 6.8σ level with 20 arc min smoothing. These measurements are consistent with simulated galaxy catalogs based on N-body simulations from a cold dark matter model with a cosmological constant. This suggests low systematics uncertainties in the map. We summarize our key findings in this Letter; the detailed methodology and tests for systematics are presented in a companion paper.

  7. Genome-wide survey and developmental expression mapping of zebrafish SET domain-containing genes.

    Directory of Open Access Journals (Sweden)

    Xiao-Jian Sun

    Full Text Available SET domain-containing proteins represent an evolutionarily conserved family of epigenetic regulators, which are responsible for most histone lysine methylation. Since some of these genes have been revealed to be essential for embryonic development, we propose that the zebrafish, a vertebrate model organism possessing many advantages for developmental studies, can be utilized to study the biological functions of these genes and the related epigenetic mechanisms during early development. To this end, we have performed a genome-wide survey of zebrafish SET domain genes. 58 genes total have been identified. Although gene duplication events give rise to several lineage-specific paralogs, clear reciprocal orthologous relationship reveals high conservation between zebrafish and human SET domain genes. These data were further subject to an evolutionary analysis ranging from yeast to human, leading to the identification of putative clusters of orthologous groups (COGs of this gene family. By means of whole-mount mRNA in situ hybridization strategy, we have also carried out a developmental expression mapping of these genes. A group of maternal SET domain genes, which are implicated in the programming of histone modification states in early development, have been identified and predicted to be responsible for all known sites of SET domain-mediated histone methylation. Furthermore, some genes show specific expression patterns in certain tissues at certain stages, suggesting the involvement of epigenetic mechanisms in the development of these systems. These results provide a global view of zebrafish SET domain histone methyltransferases in evolutionary and developmental dimensions and pave the way for using zebrafish to systematically study the roles of these genes during development.

  8. Mapping Norway - a Method to Register and Survey the Status of Accessibility

    Science.gov (United States)

    Michaelis, Sven; Bögelsack, Kathrin

    2018-05-01

    The Norwegian mapping authority has developed a standard method for mapping accessibility mostly for people with limited or no walking abilities in urban and recreational areas. We choose an object-orientated approach where points, lines and polygons represents objects in the environment. All data are stored in a geospatial database, so they can be presented as web map and analyzed using GIS software. By the end of 2016 more than 160 municipalities are mapped using that method. The aim of this project is to establish a national standard for mapping and to provide a geodatabase that shows the status of accessibility throughout Norway. The data provide a useful tool for national statistics, local planning authorities and private users. First results show that accessibility is low and Norway still faces many challenges to meet the government's goals for Universal Design.

  9. Mapping of Rill Erosion of Arable Soils Based on Unmanned Aerial Vehicles Survey

    Science.gov (United States)

    Kashtanov, A. N.; Vernyuk, Yu. I.; Savin, I. Yu.; Shchepot'ev, V. V.; Dokukin, P. A.; Sharychev, D. V.; Li, K. A.

    2018-04-01

    Possibilities of using data obtained from unmanned aerial vehicles for detection and mapping of rill erosion on arable lands are analyzed. Identification and mapping of rill erosion was performed on a key plot with a predominance of arable gray forest soils (Greyzemic Phaeozems) under winter wheat in Tula oblast. This plot was surveyed from different heights and in different periods to determine the reliability of identification of rill erosion on the basis of automated procedures in a GIS. It was found that, despite changes in the pattern of rills during the warm season, only one survey during this season is sufficient for adequate assessment of the area of eroded soils. According to our data, the most reliable identification of rill erosion is based on the aerial survey from the height of 50 m above the soil surface. When the height of the flight is more than 200 m, erosional rills virtually escape identification. The efficiency of identification depends on the type of crops, their status, and time of the survey. The surveys of bare soil surface in periods with maximum possible interval from the previous rain or snowmelt season are most efficient. The results of our study can be used in the systems of remote sensing monitoring of erosional processes on arable fields. Application of multiand hyperspectral cameras can improve the efficiency of monitoring.

  10. ASSESSING STUDENTS’ COMPETENCE IN DEVELOPING CHOROPLETH MAPS COMBINED WITH DIAGRAM MAPS

    Directory of Open Access Journals (Sweden)

    GABRIELA OSACI-COSTACHE

    2015-01-01

    Full Text Available Choropleth maps combined with diagram maps are frequently used in geography. For this reason, based on the maps developed by students, the study aims at the following: identifying and analyzing the errors made by the students; establishing and analyzing the competence level of the students; identifying the causes that led to these errors; and finding the best solutions to improve both the educational process aiming at the formation of this kind of competences and the students’ results. The map assessment was accomplished during two academic years (2013-2014 and 2014-2015, in the aftermath of the activities meant to train the competence. We assessed 105 maps prepared by the students in Cartography (Faculty of Geography, University of Bucharest based on an analytical evaluation grid, with dichotomous scale, comprising 15 criteria. This tool helped us identify the errors made by the students, as well as their competence level. By applying a questionnaire, we identified the source of the errors from the students’ perspective, while by comparing the errors and the competence levels at the end of the two academic years we were able to come up with potential solutions for the improvement of the teaching and learning process.

  11. Description and preliminary map, airborne electromagnetic survey of parts of Iron, Baraga, and Dickson counties, Michigan

    Science.gov (United States)

    Heran, William D.; Smith, Bruce D.

    1980-01-01

    The data presented herein is from an airborne electromagnetic INPUT* survey conducted by Geoterrex Limited of Canada for the U.S. Geological Survey. The survey area is located in the central part of the Upper Peninsula of Michigan, within parts of Iron, Baraga, and Dickinson Counties. The general area covered is between 46°00' and 46°30' latitude and 88°00' and 88°30' longitude (fig. 1).The INPUT survey was flown as part of a U.S. Geological Survey CUSMAP (Conterminous United States Mineral Appraisal Program) project focusing on the Iron River 2° quadrangle. The survey was flown in order to provide geophysical information which will aid in an integrated geological assessment of mineral potentials of this part of the Iron River 2 quadrangle. The flight-line spacing was chosen to maximize the aerial coverage without a loss of resolution of major lithologic and structural features. East-west flight lines were flown 400 feet above ground at 1/2-mile intervals. Aerial photos were used for navigation and the flight path was recorded on continuous-strip film. A continuously recording total field ground magnetic station was used to monitor variations in the Earth's magnetic field. One north-south line was flown to provide a tie for the magnetic data which was recorded simultaneously with the electromagnetic data by a sensor mounted in the tail of the aircraft. This report is one of two open-file reports. The map in the present report contains locations of the fiducial points, the flight lines, and preliminary locations of anomalies and conductive zones, all plotted on an air photomosaic. The latitude and longitude ticks marked on this map are only approximate due to distortion in air photos used to recover the flight line position. This map is preliminary and is not to be considered a final interpretation. The other report (Reran and Smith, 1980) contains a description of the instrument specifications, a copy of the ground station magnetic data, and a microfilm

  12. Methodology developed to make the Quebec indoor radon potential map

    Energy Technology Data Exchange (ETDEWEB)

    Drolet, Jean-Philippe, E-mail: jean-philippe.drolet@ete.inrs.ca [Institut national de la recherche scientifique, Eau Terre Environnement Research Centre (ETE-INRS), 490 de la Couronne, G1K 9A9 Quebec (Canada); Martel, Richard [Institut national de la recherche scientifique, Eau Terre Environnement Research Centre (ETE-INRS), 490 de la Couronne, G1K 9A9 Quebec (Canada); Poulin, Patrick [Institut national de santé publique du Québec (INSPQ), 945 avenue Wolfe, G1V 5B3 Quebec (Canada); Dessau, Jean-Claude [Agence de la santé et des services sociaux des Laurentides, 1000 rue Labelle, J7Z 5 N6 Saint-Jérome (Canada)

    2014-03-01

    This paper presents a relevant approach to predict the indoor radon potential based on the combination of the radiogeochemical data and the indoor radon measurements in the Quebec province territory (Canada). The Quebec ministry of health asked for such a map to identify the radon-prone areas to manage the risk for the population related to indoor radon exposure. Three radiogeochemical criteria including (1) equivalent uranium (eU) concentration from airborne surface gamma-ray surveys, (2) uranium concentration measurements in sediments, (3) bedrock and surficial geology were combined with 3082 basement radon concentration measurements to identify the radon-prone areas. It was shown that it is possible to determine thresholds for the three criteria that implied statistically significant different levels of radon potential using Kruskal–Wallis one way analyses of variance by ranks. The three discretized radiogeochemical datasets were combined into a total predicted radon potential that sampled 98% of the studied area. The combination process was also based on Kruskal–Wallis one way ANOVA. Four statistically significant different predicted radon potential levels were created: low, medium, high and very high. Respectively 10 and 13% of the dwellings exceed the Canadian radon guideline of 200 Bq/m{sup 3} in low and medium predicted radon potentials. These proportions rise up to 22 and 45% respectively for high and very high predicted radon potentials. This predictive map of indoor radon potential based on the radiogeochemical data was validated using a map of confirmed radon exposure in homes based on the basement radon measurements. It was shown that the map of predicted radon potential based on the radiogeochemical data was reliable to identify radon-prone areas even in zones where no indoor radon measurement exists. - Highlights: • 5 radiogeochemical datasets were used to map the geogenic indoor radon potential. • An indoor radon potential was determined for

  13. Methodology developed to make the Quebec indoor radon potential map

    International Nuclear Information System (INIS)

    Drolet, Jean-Philippe; Martel, Richard; Poulin, Patrick; Dessau, Jean-Claude

    2014-01-01

    This paper presents a relevant approach to predict the indoor radon potential based on the combination of the radiogeochemical data and the indoor radon measurements in the Quebec province territory (Canada). The Quebec ministry of health asked for such a map to identify the radon-prone areas to manage the risk for the population related to indoor radon exposure. Three radiogeochemical criteria including (1) equivalent uranium (eU) concentration from airborne surface gamma-ray surveys, (2) uranium concentration measurements in sediments, (3) bedrock and surficial geology were combined with 3082 basement radon concentration measurements to identify the radon-prone areas. It was shown that it is possible to determine thresholds for the three criteria that implied statistically significant different levels of radon potential using Kruskal–Wallis one way analyses of variance by ranks. The three discretized radiogeochemical datasets were combined into a total predicted radon potential that sampled 98% of the studied area. The combination process was also based on Kruskal–Wallis one way ANOVA. Four statistically significant different predicted radon potential levels were created: low, medium, high and very high. Respectively 10 and 13% of the dwellings exceed the Canadian radon guideline of 200 Bq/m 3 in low and medium predicted radon potentials. These proportions rise up to 22 and 45% respectively for high and very high predicted radon potentials. This predictive map of indoor radon potential based on the radiogeochemical data was validated using a map of confirmed radon exposure in homes based on the basement radon measurements. It was shown that the map of predicted radon potential based on the radiogeochemical data was reliable to identify radon-prone areas even in zones where no indoor radon measurement exists. - Highlights: • 5 radiogeochemical datasets were used to map the geogenic indoor radon potential. • An indoor radon potential was determined for each

  14. LungMAP: The Molecular Atlas of Lung Development Program.

    Science.gov (United States)

    Ardini-Poleske, Maryanne E; Clark, Robert F; Ansong, Charles; Carson, James P; Corley, Richard A; Deutsch, Gail H; Hagood, James S; Kaminski, Naftali; Mariani, Thomas J; Potter, Steven S; Pryhuber, Gloria S; Warburton, David; Whitsett, Jeffrey A; Palmer, Scott M; Ambalavanan, Namasivayam

    2017-11-01

    The National Heart, Lung, and Blood Institute is funding an effort to create a molecular atlas of the developing lung (LungMAP) to serve as a research resource and public education tool. The lung is a complex organ with lengthy development time driven by interactive gene networks and dynamic cross talk among multiple cell types to control and coordinate lineage specification, cell proliferation, differentiation, migration, morphogenesis, and injury repair. A better understanding of the processes that regulate lung development, particularly alveologenesis, will have a significant impact on survival rates for premature infants born with incomplete lung development and will facilitate lung injury repair and regeneration in adults. A consortium of four research centers, a data coordinating center, and a human tissue repository provides high-quality molecular data of developing human and mouse lungs. LungMAP includes mouse and human data for cross correlation of developmental processes across species. LungMAP is generating foundational data and analysis, creating a web portal for presentation of results and public sharing of data sets, establishing a repository of young human lung tissues obtained through organ donor organizations, and developing a comprehensive lung ontology that incorporates the latest findings of the consortium. The LungMAP website (www.lungmap.net) currently contains more than 6,000 high-resolution lung images and transcriptomic, proteomic, and lipidomic human and mouse data and provides scientific information to stimulate interest in research careers for young audiences. This paper presents a brief description of research conducted by the consortium, database, and portal development and upcoming features that will enhance the LungMAP experience for a community of users. Copyright © 2017 the American Physiological Society.

  15. The Open Cluster Chemical Abundances and Mapping (OCCAM) Survey: Optical Extension for Neutron Capture Elements

    Science.gov (United States)

    Melendez, Matthew; O'Connell, Julia; Frinchaboy, Peter M.; Donor, John; Cunha, Katia M. L.; Shetrone, Matthew D.; Majewski, Steven R.; Zasowski, Gail; Pinsonneault, Marc H.; Roman-Lopes, Alexandre; Stassun, Keivan G.; APOGEE Team

    2017-01-01

    The Open Cluster Chemical Abundance & Mapping (OCCAM) survey is a systematic survey of Galactic open clusters using data primarily from the SDSS-III/APOGEE-1 survey. However, neutron capture elements are very limited in the IR region covered by APOGEE. In an effort to fully study detailed Galactic chemical evolution, we are conducting a high resolution (R~60,000) spectroscopic abundance analysis of neutron capture elements for OCCAM clusters in the optical regime to complement the APOGEE results. As part of this effort, we present Ba II, La II, Ce II and Eu II results for a few open clusters without previous abundance measurements using data obtained at McDonald Observatory with the 2.1m Otto Struve telescope and Sandiford Echelle Spectrograph.This work is supported by an NSF AAG grant AST-1311835.

  16. Mapping Place and Identity in Academic Development: A Humanistic Dialogue

    Science.gov (United States)

    Holmes, Trevor; Dea, Shannon

    2012-01-01

    This article presents a humanistic dialogue between the authors that focuses on mapping place and identity in academic development. The authors chose this format in order to capture some of the important work that conversation among intellectual peers can do--work that forms the basis of much learning at conferences and in the corridors and…

  17. Simple sequence repeat marker development and genetic mapping ...

    Indian Academy of Sciences (India)

    polymorphic SSR (simple sequence repeats) markers from libraries enriched for GA, CAA and AAT repeats, as well as 6 ... ers for quinoa was the development of a genetic linkage map ...... Weber J. L. 1990 Informativeness of human (dC-dA)n.

  18. Mapping Civil Society Initiatives toward the Development and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    In addition to the mapping exercise, the project will result in an analytical paper on the nature, scope and scale of work being carried out, and an annotated directory of CSOs working on development issues with the Muslim community of India. The directory will be published and made available to the general public and ...

  19. Comparison of the large-scale radon risk map for southern Belgium with results of high resolution surveys

    International Nuclear Information System (INIS)

    Zhu, H.-C.; Charlet, J.M.; Poffijn, A.

    2000-01-01

    A large-scale radon survey consisting of long-term measurements in about 5200 singe-family houses in the southern part of Belgium was carried from 1995 to 1999. A radon risk map for the region was produced using geostatistical and GIS approaches. Some communes or villages situated within high risk areas were chosen for detailed surveys. A high resolution radon survey with about 330 measurements was performed in half part of the commune of Burg-Reuland. Comparison of radon maps on quite different scales shows that the general Rn risk map has similar pattern as the radon map for the detailed study area. Another detailed radon survey in the village of Hatrival, situated in a high radon area, found very high proportion of houses with elevated radon concentrations. The results of this detailed survey are comparable to the expectation for high risk areas on the large-scale radon risk map. The good correspondence between the findings of the general risk map and the analysis of the limited detailed surveys, suggests that the large-scale radon risk map is likely reliable. (author)

  20. High Throughput T Epitope Mapping and Vaccine Development

    Directory of Open Access Journals (Sweden)

    Giuseppina Li Pira

    2010-01-01

    Full Text Available Mapping of antigenic peptide sequences from proteins of relevant pathogens recognized by T helper (Th and by cytolytic T lymphocytes (CTL is crucial for vaccine development. In fact, mapping of T-cell epitopes provides useful information for the design of peptide-based vaccines and of peptide libraries to monitor specific cellular immunity in protected individuals, patients and vaccinees. Nevertheless, epitope mapping is a challenging task. In fact, large panels of overlapping peptides need to be tested with lymphocytes to identify the sequences that induce a T-cell response. Since numerous peptide panels from antigenic proteins are to be screened, lymphocytes available from human subjects are a limiting factor. To overcome this limitation, high throughput (HTP approaches based on miniaturization and automation of T-cell assays are needed. Here we consider the most recent applications of the HTP approach to T epitope mapping. The alternative or complementary use of in silico prediction and experimental epitope definition is discussed in the context of the recent literature. The currently used methods are described with special reference to the possibility of applying the HTP concept to make epitope mapping an easier procedure in terms of time, workload, reagents, cells and overall cost.

  1. From retinal waves to activity-dependent retinogeniculate map development.

    Science.gov (United States)

    Markowitz, Jeffrey; Cao, Yongqiang; Grossberg, Stephen

    2012-01-01

    A neural model is described of how spontaneous retinal waves are formed in infant mammals, and how these waves organize activity-dependent development of a topographic map in the lateral geniculate nucleus, with connections from each eye segregated into separate anatomical layers. The model simulates the spontaneous behavior of starburst amacrine cells and retinal ganglion cells during the production of retinal waves during the first few weeks of mammalian postnatal development. It proposes how excitatory and inhibitory mechanisms within individual cells, such as Ca(2+)-activated K(+) channels, and cAMP currents and signaling cascades, can modulate the spatiotemporal dynamics of waves, notably by controlling the after-hyperpolarization currents of starburst amacrine cells. Given the critical role of the geniculate map in the development of visual cortex, these results provide a foundation for analyzing the temporal dynamics whereby the visual cortex itself develops.

  2. From retinal waves to activity-dependent retinogeniculate map development.

    Directory of Open Access Journals (Sweden)

    Jeffrey Markowitz

    Full Text Available A neural model is described of how spontaneous retinal waves are formed in infant mammals, and how these waves organize activity-dependent development of a topographic map in the lateral geniculate nucleus, with connections from each eye segregated into separate anatomical layers. The model simulates the spontaneous behavior of starburst amacrine cells and retinal ganglion cells during the production of retinal waves during the first few weeks of mammalian postnatal development. It proposes how excitatory and inhibitory mechanisms within individual cells, such as Ca(2+-activated K(+ channels, and cAMP currents and signaling cascades, can modulate the spatiotemporal dynamics of waves, notably by controlling the after-hyperpolarization currents of starburst amacrine cells. Given the critical role of the geniculate map in the development of visual cortex, these results provide a foundation for analyzing the temporal dynamics whereby the visual cortex itself develops.

  3. Aerial Radiological Survey of Abandoned Uranium Mines (AUM) Map Service, Navajo Nation, 1994-1999, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — This map service contains data from aerial radiological surveys of 41 potential uranium mining areas (1,144 square miles) within the Navajo Nation that were...

  4. DEEP NEAR-INFRARED SURVEY OF THE PIPE NEBULA. II. DATA, METHODS, AND DUST EXTINCTION MAPS

    International Nuclear Information System (INIS)

    Roman-Zuniga, Carlos G.; Alves, Joao F.; Lada, Charles J.; Lombardi, Marco

    2010-01-01

    We present a new set of high-resolution dust extinction maps of the nearby and essentially starless Pipe Nebula molecular cloud. The maps were constructed from a concerted deep near-infrared imaging survey with the ESO-VLT, ESO-NTT, CAHA 3.5 m telescopes, and 2MASS data. The new maps have a resolution three times higher than the previous extinction map of this cloud by Lombardi et al. and are able to resolve structures down to 2600 AU. We detect 244 significant extinction peaks across the cloud. These peaks have masses between 0.1 and 18.4 M sun , diameters between 1.2 and 5.7 x 10 4 AU (0.06 and 0.28 pc), and mean densities of about 10 4 cm -3 , all in good agreement with previous results. From the analysis of the mean surface density of companions we find a well-defined scale near 1.4 x 10 4 AU below which we detect a significant decrease in structure of the cloud. This scale is smaller than the Jeans length calculated from the mean density of the peaks. The surface density of peaks is not uniform but instead it displays clustering. Extinction peaks in the Pipe Nebula appear to have a spatial distribution similar to the stars in Taurus, suggesting that the spatial distribution of stars evolves directly from the primordial spatial distribution of high-density material.

  5. Aerial radiometric and magnetic survey: Beeville/Bay City National Topographic Map, Texas Gulf Coast

    International Nuclear Information System (INIS)

    1979-01-01

    As part of the National Uranium Resource Evaluation program Geodata International, Inc. of Dallas, Texas, conducted an airborne gamma ray and total magnetic field survey of Beeville/Bay City Quadrangle of the Texas Gulf Coast area. Volume 1 gives the description of the program and results, and volume 2 gives the flight line profile data and statistical analysis results. The Beeville/Bay City Map Sheet shows Tertiary and Quaternary-aged strata which are part of the coastal plain of the Gulf Coast Geosyncline. The Cenozoic sediments overlie Mesozoic, Paleozoic, and Precambrian rocks, and have a relatively gentle homoclinal dip toward the gulf. The Quaternary and Tertiary sediments of the map sheet overlie the western flank of the Houston-East Texas Embayment, the northeastern side of the Rio Grande Embayment, and the San Marcos Arch. Recent and Pleistocene sediments crop-out in the south and east, and are more extensive in the vicinity of the structural embayments. The Pliocene-aged Goliad Formation crops-out extensively to the northwest. Miocene and Eocene strata occur in the northwestern corner of the map sheet. The uranium deposits occur in the Tertiary strata, but are most intensely mined in the Eocene strata immediately to the west of the map sheet area

  6. Mapping crop diseases using survey data: The case of bacterial wilt in bananas in the East African highlands

    NARCIS (Netherlands)

    Bouwmeester, H.; Heuvelink, G.B.M.; Stoorvogel, J.J.

    2016-01-01

    Globally, crop diseases result in significant losses in crop yields. To properly target interventions to control crop diseases, it is important to map diseases at a high resolution. However, many surveys of crop diseases pose challenges to mapping because available observations are only proxies of

  7. In situ gamma spectrometry development for site mapping

    International Nuclear Information System (INIS)

    Panza, F.

    2012-01-01

    The high-resolution gamma spectrometry currently provides a powerful analytical tool for performing environmental measurements. In the context of radiological characterization of a site (natural or artificial radioactivity) and for the dismantling of nuclear installations, mapping of radionuclides is an important asset. The idea is to move a HPGe spectrometer to study the site and from nuclear and position data, to identify, to locate and to quantify the radionuclides present in the soil. The development of this tool follows an intercomparison (ISIS 2007) where an intervention/crisis exercise showed the limits of current tools. The main part of this research project has focused on mapping of nuclear data. Knowledge of the parameters of an in situ spectrum helped to create a simulator, modeling the response of a spectrometer moving over contaminated soil. The simulator itself helped to develop algorithms for mapping and to test them in extreme situations and not realizable. A large part of this research leads to the creation of a viable prototype providing real-time information concerning the identity and locality as possible radionuclides. The work performed on the deconvolution of data can make in post processing a map of the activity of radionuclide soil but also an indication of the depth distribution of the source. The prototype named OSCAR was tested on contaminated sites (Switzerland and Japan) and the results are in agreement with reference measurements. (author)

  8. Veridical mapping in the development of exceptional autistic abilities.

    Science.gov (United States)

    Mottron, Laurent; Bouvet, Lucie; Bonnel, Anna; Samson, Fabienne; Burack, Jacob A; Dawson, Michelle; Heaton, Pamela

    2013-02-01

    Superior perception, peaks of ability, and savant skills are often observed in the autistic phenotype. The enhanced perceptual functioning model (Mottron et al., 2006a) emphasizes the increased role and autonomy of perceptual information processing in autistic cognition. Autistic abilities also involve enhanced pattern detection, which may develop through veridical mapping across isomorphic perceptual and non-perceptual structures (Mottron et al., 2009). In this paper, we elaborate veridical mapping as a specific mechanism which can explain the higher incidence of savant abilities, as well as other related phenomena, in autism. We contend that savant abilities such as hyperlexia, but also absolute pitch and synaesthesia, involve similar neurocognitive components, share the same structure and developmental course, and represent related ways by which the perceptual brain deals with objective structures under different conditions. Plausibly, these apparently different phenomena develop through a veridical mapping mechanism whereby perceptual information is coupled with homological data drawn from within or across isomorphic structures. The atypical neural connectivity characteristic of autism is consistent with a developmental predisposition to veridical mapping and the resulting high prevalence of savant abilities, absolute pitch, and synaesthesia in autism. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Continuing Long Term Optical and Infrared Reverberation Mapping of 17 Sloan Digital Sky Survey Quasars

    Science.gov (United States)

    Gorjian, Varoujan; Barth, Aaron; Brandt, Niel; Dawson, Kyle; Green, Paul; Ho, Luis; Horne, Keith; Jiang, Linhua; McGreer, Ian; Schneider, Donald; Shen, Yue; Tao, Charling

    2018-05-01

    Previous Spitzer reverberation monitoring projects searching for UV/optical light absorbed and re-emitted in the IR by dust have been limited to low luminosity active galactic nuclei (AGN) that could potentially show reverberation within a single cycle ( 1 year). Cycle 11-12's two year baseline allowed for the reverberation mapping of 17 high-luminosity quasars from the Sloan Digital Sky Survey Reverberation Mapping project. We continued this monitoring in Cycle 13 and now propose to extend this program in Cycle 14. By combining ground-based monitoring from Pan-STARRS, CFHT, and Steward Observatory telescopes with Spitzer data we have for the first time detected dust reverberation in quasars. By continuing observations with this unqiue combination of resources we should detect reverberation in more objects and reduce the uncertainties for the remaining sources.

  10. National-scale crop type mapping and area estimation using multi-resolution remote sensing and field survey

    Science.gov (United States)

    Song, X. P.; Potapov, P.; Adusei, B.; King, L.; Khan, A.; Krylov, A.; Di Bella, C. M.; Pickens, A. H.; Stehman, S. V.; Hansen, M.

    2016-12-01

    Reliable and timely information on agricultural production is essential for ensuring world food security. Freely available medium-resolution satellite data (e.g. Landsat, Sentinel) offer the possibility of improved global agriculture monitoring. Here we develop and test a method for estimating in-season crop acreage using a probability sample of field visits and producing wall-to-wall crop type maps at national scales. The method is first illustrated for soybean cultivated area in the US for 2015. A stratified, two-stage cluster sampling design was used to collect field data to estimate national soybean area. The field-based estimate employed historical soybean extent maps from the U.S. Department of Agriculture (USDA) Cropland Data Layer to delineate and stratify U.S. soybean growing regions. The estimated 2015 U.S. soybean cultivated area based on the field sample was 341,000 km2 with a standard error of 23,000 km2. This result is 1.0% lower than USDA's 2015 June survey estimate and 1.9% higher than USDA's 2016 January estimate. Our area estimate was derived in early September, about 2 months ahead of harvest. To map soybean cover, the Landsat image archive for the year 2015 growing season was processed using an active learning approach. Overall accuracy of the soybean map was 84%. The field-based sample estimated area was then used to calibrate the map such that the soybean acreage of the map derived through pixel counting matched the sample-based area estimate. The strength of the sample-based area estimation lies in the stratified design that takes advantage of the spatially explicit cropland layers to construct the strata. The success of the mapping was built upon an automated system which transforms Landsat images into standardized time-series metrics. The developed method produces reliable and timely information on soybean area in a cost-effective way and could be implemented in an operational mode. The approach has also been applied for other crops in

  11. Post-Mission Quality Assurance Procedure for Survey-Grade Mobile Mapping Systems

    Science.gov (United States)

    Kerstinga, A. P.; Friess, P.

    2016-06-01

    Mobile Mapping Systems (MMS) consist of terrestrial-based moving platforms that integrate a set of imaging sensors (typically digital cameras and laser scanners) and a Position and Orientation System (POS), designed to collect data of the surrounding environment. MMS can be classified as "mapping-grade" or "survey-grade" depending on the system's attainable accuracy. Mapping-grade MMS produce geospatial data suitable for GIS applications (e.g., asset management) while survey-grade systems should satisfy high-accuracy applications such as engineering/design projects. The delivered accuracy of an MMS is dependent on several factors such as the accuracy of the system measurements and calibration parameters. It is critical, especially for survey-grade systems, to implement a robust Quality Assurance (QA) procedure to ensure the achievement of the expected accuracy. In this paper, a new post-mission QA procedure is presented. The presented method consists of a fully-automated self-calibration process that allows for the estimation of corrections to the system calibration parameters (e.g., boresight angles and lever-arm offsets relating the lidar sensor(s) to the IMU body frame) as well as corrections to the system measurements (e.g., post-processed trajectory position and orientation, scan angles and ranges). As for the system measurements, the major challenge for MMS is related to the trajectory determination in the presence of multipath signals and GNSS outages caused by buildings, underpasses and high vegetation. In the proposed self-calibration method, trajectory position errors are properly modelled while utilizing an efficient/meaningful trajectory segmentation technique. The validity of the proposed method is demonstrated using a dataset collected under unfavorable GNSS conditions.

  12. POST-MISSION QUALITY ASSURANCE PROCEDURE FOR SURVEY-GRADE MOBILE MAPPING SYSTEMS

    Directory of Open Access Journals (Sweden)

    A. P. Kerstinga

    2016-06-01

    Full Text Available Mobile Mapping Systems (MMS consist of terrestrial-based moving platforms that integrate a set of imaging sensors (typically digital cameras and laser scanners and a Position and Orientation System (POS, designed to collect data of the surrounding environment. MMS can be classified as “mapping-grade” or “survey-grade” depending on the system’s attainable accuracy. Mapping-grade MMS produce geospatial data suitable for GIS applications (e.g., asset management while survey-grade systems should satisfy high-accuracy applications such as engineering/design projects. The delivered accuracy of an MMS is dependent on several factors such as the accuracy of the system measurements and calibration parameters. It is critical, especially for survey-grade systems, to implement a robust Quality Assurance (QA procedure to ensure the achievement of the expected accuracy. In this paper, a new post-mission QA procedure is presented. The presented method consists of a fully-automated self-calibration process that allows for the estimation of corrections to the system calibration parameters (e.g., boresight angles and lever-arm offsets relating the lidar sensor(s to the IMU body frame as well as corrections to the system measurements (e.g., post-processed trajectory position and orientation, scan angles and ranges. As for the system measurements, the major challenge for MMS is related to the trajectory determination in the presence of multipath signals and GNSS outages caused by buildings, underpasses and high vegetation. In the proposed self-calibration method, trajectory position errors are properly modelled while utilizing an efficient/meaningful trajectory segmentation technique. The validity of the proposed method is demonstrated using a dataset collected under unfavorable GNSS conditions.

  13. Mapping fetal brain development in utero using magnetic resonance imaging: the Big Bang of brain mapping.

    Science.gov (United States)

    Studholme, Colin

    2011-08-15

    The development of tools to construct and investigate probabilistic maps of the adult human brain from magnetic resonance imaging (MRI) has led to advances in both basic neuroscience and clinical diagnosis. These tools are increasingly being applied to brain development in adolescence and childhood, and even to neonatal and premature neonatal imaging. Even earlier in development, parallel advances in clinical fetal MRI have led to its growing use as a tool in challenging medical conditions. This has motivated new engineering developments encompassing optimal fast MRI scans and techniques derived from computer vision, the combination of which allows full 3D imaging of the moving fetal brain in utero without sedation. These promise to provide a new and unprecedented window into early human brain growth. This article reviews the developments that have led us to this point, examines the current state of the art in the fields of fast fetal imaging and motion correction, and describes the tools to analyze dynamically changing fetal brain structure. New methods to deal with developmental tissue segmentation and the construction of spatiotemporal atlases are examined, together with techniques to map fetal brain growth patterns.

  14. Development of flood-inundation maps for the Mississippi River in Saint Paul, Minnesota

    Science.gov (United States)

    Czuba, Christiana R.; Fallon, James D.; Lewis, Corby R.; Cooper, Diane F.

    2014-01-01

    Digital flood-inundation maps for a 6.3-mile reach of the Mississippi River in Saint Paul, Minnesota, were developed through a multi-agency effort by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers and in collaboration with the National Weather Service. The inundation maps, which can be accessed through the U.S. Geological Survey Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ and the National Weather Service Advanced Hydrologic Prediction Service site at http://water.weather.gov/ahps/inundation.php, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the U.S. Geological Survey streamgage at the Mississippi River at Saint Paul (05331000). The National Weather Service forecasted peak-stage information at the streamgage may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the Mississippi River by means of a one-dimensional step-backwater model. The hydraulic model was calibrated using the most recent stage-discharge relation at the Robert Street location (rating curve number 38.0) of the Mississippi River at Saint Paul (streamgage 05331000), as well as an approximate water-surface elevation-discharge relation at the Mississippi River at South Saint Paul (U.S. Army Corps of Engineers streamgage SSPM5). The model also was verified against observed high-water marks from the recent 2011 flood event and the water-surface profile from existing flood insurance studies. The hydraulic model was then used to determine 25 water-surface profiles for flood stages at 1-foot intervals ranging from approximately bankfull stage to greater than the highest recorded stage at streamgage 05331000. The simulated water-surface profiles were then combined with a geographic information system digital elevation model, derived from high-resolution topography

  15. Development of a specific geological mapping software under MAPGIS

    International Nuclear Information System (INIS)

    Zhang Wenkai

    2010-01-01

    The most often used mapping software in geological exploration is MAPGIS system, and related standard is established based on it. The software has more agile functions, except for the following shortages: more parameters to select, difficult to master, different parameters to use for each one, low efficiency. As a result, a specific software is developed for geological mapping by using VC++ on the platform of MAPGIS. According to the standards, toolbars are built for strata, rock, geographic information and materials, etc. By pushing on the buttons, the parameters are selected, and menus of toolbars can be modified to select parameters for each working areas, legends can be sorted automatically. So, the speed can be improved greatly, and the parameters can be identical. The software can complete the transition between Gauss coordinate and longitude-latitude coordinate, drawing points, frames by longitude-latitude, responsible form, plain diagram and profile, etc. The software also improves the way of clipping, topologizing, node catching methods. The application of the software indicates that it can improve the speed of geological mapping greatly, and can improve the standardized level of the final maps. (authors)

  16. The Open Cluster Chemical Abundances and Mapping (OCCAM) Survey: Current Status

    Science.gov (United States)

    Frinchaboy, Peter; O'Connell, Julia; Donor, John; Cunha, Katia; Thompson, Benjamin; Melendez, Matthew; Shetrone, Matthew; Zasowski, Gail; Majewski, Steven R.; APOGEE TEAM

    2018-01-01

    The Open Cluster Chemical Analysis and Mapping (OCCAM) survey aims to produce a comprehensive, uniform, infrared-based data set forhundreds of open clusters, and constrain key Galactic dynamical and chemical parameters using the SDSS/APOGEE survey and follow-up from the McDonald Observatory Otto Struve 2.1-m telescope and Sandiford Cass Echelle Spectrograph (R ~ 60,000). We report on multi-element radial abundance gradients obtained from a sample of over 30 disk open clusters. The APOGEE chemical abundances were derived automatically by the ASPCAP pipeline and these are part of the SDSS IV Data Release 14, optical follow-up were analyzed using equivalent width analysis and spectral synthesis. We present the current open cluster sample that spans a significant range in age allowing exploration of the evolution of the Galactic abundance gradients. This work is supported by an NSF AAG grants AST-1311835 & AST-1715662.

  17. Adopting of Agile methods in Software Development Organizations: Systematic Mapping

    Directory of Open Access Journals (Sweden)

    Samia Abdalhamid

    2017-11-01

    Full Text Available Adoption of agile methods in the software development organization is considered as a powerful solution to deal with the quickly changing and regularly developing business environment and fully-educated customers with constantly rising expectation, such as shorter time periods and an extraordinary level of response and service. This study investigates the adoption of agile approaches in software development organizations by using systematic mapping. Six research questions are identified, and to answer these questions a number of research papers have been reviewed in electronic databases. Finally, 25 research papers are examined and answers to all research questions are provided.

  18. Sloan Digital Sky Survey IV: Mapping the Milky Way, Nearby Galaxies, and the Distant Universe

    Science.gov (United States)

    Blanton, Michael R.; Bershady, Matthew A.; Abolfathi, Bela; Albareti, Franco D.; Allende Prieto, Carlos; Almeida, Andres; Alonso-García, Javier; Anders, Friedrich; Anderson, Scott F.; Andrews, Brett; Aquino-Ortíz, Erik; Aragón-Salamanca, Alfonso; Argudo-Fernández, Maria; Armengaud, Eric; Aubourg, Eric; Avila-Reese, Vladimir; Badenes, Carles; Bailey, Stephen; Barger, Kathleen A.; Barrera-Ballesteros, Jorge; Bartosz, Curtis; Bates, Dominic; Baumgarten, Falk; Bautista, Julian; Beaton, Rachael; Beers, Timothy C.; Belfiore, Francesco; Bender, Chad F.; Berlind, Andreas A.; Bernardi, Mariangela; Beutler, Florian; Bird, Jonathan C.; Bizyaev, Dmitry; Blanc, Guillermo A.; Blomqvist, Michael; Bolton, Adam S.; Boquien, Médéric; Borissova, Jura; van den Bosch, Remco; Bovy, Jo; Brandt, William N.; Brinkmann, Jonathan; Brownstein, Joel R.; Bundy, Kevin; Burgasser, Adam J.; Burtin, Etienne; Busca, Nicolás G.; Cappellari, Michele; Delgado Carigi, Maria Leticia; Carlberg, Joleen K.; Carnero Rosell, Aurelio; Carrera, Ricardo; Chanover, Nancy J.; Cherinka, Brian; Cheung, Edmond; Gómez Maqueo Chew, Yilen; Chiappini, Cristina; Doohyun Choi, Peter; Chojnowski, Drew; Chuang, Chia-Hsun; Chung, Haeun; Cirolini, Rafael Fernando; Clerc, Nicolas; Cohen, Roger E.; Comparat, Johan; da Costa, Luiz; Cousinou, Marie-Claude; Covey, Kevin; Crane, Jeffrey D.; Croft, Rupert A. C.; Cruz-Gonzalez, Irene; Garrido Cuadra, Daniel; Cunha, Katia; Damke, Guillermo J.; Darling, Jeremy; Davies, Roger; Dawson, Kyle; de la Macorra, Axel; Dell'Agli, Flavia; De Lee, Nathan; Delubac, Timothée; Di Mille, Francesco; Diamond-Stanic, Aleks; Cano-Díaz, Mariana; Donor, John; Downes, Juan José; Drory, Niv; du Mas des Bourboux, Hélion; Duckworth, Christopher J.; Dwelly, Tom; Dyer, Jamie; Ebelke, Garrett; Eigenbrot, Arthur D.; Eisenstein, Daniel J.; Emsellem, Eric; Eracleous, Mike; Escoffier, Stephanie; Evans, Michael L.; Fan, Xiaohui; Fernández-Alvar, Emma; Fernandez-Trincado, J. G.; Feuillet, Diane K.; Finoguenov, Alexis; Fleming, Scott W.; Font-Ribera, Andreu; Fredrickson, Alexander; Freischlad, Gordon; Frinchaboy, Peter M.; Fuentes, Carla E.; Galbany, Lluís; Garcia-Dias, R.; García-Hernández, D. A.; Gaulme, Patrick; Geisler, Doug; Gelfand, Joseph D.; Gil-Marín, Héctor; Gillespie, Bruce A.; Goddard, Daniel; Gonzalez-Perez, Violeta; Grabowski, Kathleen; Green, Paul J.; Grier, Catherine J.; Gunn, James E.; Guo, Hong; Guy, Julien; Hagen, Alex; Hahn, ChangHoon; Hall, Matthew; Harding, Paul; Hasselquist, Sten; Hawley, Suzanne L.; Hearty, Fred; Gonzalez Hernández, Jonay I.; Ho, Shirley; Hogg, David W.; Holley-Bockelmann, Kelly; Holtzman, Jon A.; Holzer, Parker H.; Huehnerhoff, Joseph; Hutchinson, Timothy A.; Hwang, Ho Seong; Ibarra-Medel, Héctor J.; da Silva Ilha, Gabriele; Ivans, Inese I.; Ivory, KeShawn; Jackson, Kelly; Jensen, Trey W.; Johnson, Jennifer A.; Jones, Amy; Jönsson, Henrik; Jullo, Eric; Kamble, Vikrant; Kinemuchi, Karen; Kirkby, David; Kitaura, Francisco-Shu; Klaene, Mark; Knapp, Gillian R.; Kneib, Jean-Paul; Kollmeier, Juna A.; Lacerna, Ivan; Lane, Richard R.; Lang, Dustin; Law, David R.; Lazarz, Daniel; Lee, Youngbae; Le Goff, Jean-Marc; Liang, Fu-Heng; Li, Cheng; Li, Hongyu; Lian, Jianhui; Lima, Marcos; Lin, Lihwai; Lin, Yen-Ting; Bertran de Lis, Sara; Liu, Chao; de Icaza Lizaola, Miguel Angel C.; Long, Dan; Lucatello, Sara; Lundgren, Britt; MacDonald, Nicholas K.; Deconto Machado, Alice; MacLeod, Chelsea L.; Mahadevan, Suvrath; Geimba Maia, Marcio Antonio; Maiolino, Roberto; Majewski, Steven R.; Malanushenko, Elena; Malanushenko, Viktor; Manchado, Arturo; Mao, Shude; Maraston, Claudia; Marques-Chaves, Rui; Masseron, Thomas; Masters, Karen L.; McBride, Cameron K.; McDermid, Richard M.; McGrath, Brianne; McGreer, Ian D.; Medina Peña, Nicolás; Melendez, Matthew; Merloni, Andrea; Merrifield, Michael R.; Meszaros, Szabolcs; Meza, Andres; Minchev, Ivan; Minniti, Dante; Miyaji, Takamitsu; More, Surhud; Mulchaey, John; Müller-Sánchez, Francisco; Muna, Demitri; Munoz, Ricardo R.; Myers, Adam D.; Nair, Preethi; Nandra, Kirpal; Correa do Nascimento, Janaina; Negrete, Alenka; Ness, Melissa; Newman, Jeffrey A.; Nichol, Robert C.; Nidever, David L.; Nitschelm, Christian; Ntelis, Pierros; O'Connell, Julia E.; Oelkers, Ryan J.; Oravetz, Audrey; Oravetz, Daniel; Pace, Zach; Padilla, Nelson; Palanque-Delabrouille, Nathalie; Alonso Palicio, Pedro; Pan, Kaike; Parejko, John K.; Parikh, Taniya; Pâris, Isabelle; Park, Changbom; Patten, Alim Y.; Peirani, Sebastien; Pellejero-Ibanez, Marcos; Penny, Samantha; Percival, Will J.; Perez-Fournon, Ismael; Petitjean, Patrick; Pieri, Matthew M.; Pinsonneault, Marc; Pisani, Alice; Poleski, Radosław; Prada, Francisco; Prakash, Abhishek; Queiroz, Anna Bárbara de Andrade; Raddick, M. Jordan; Raichoor, Anand; Barboza Rembold, Sandro; Richstein, Hannah; Riffel, Rogemar A.; Riffel, Rogério; Rix, Hans-Walter; Robin, Annie C.; Rockosi, Constance M.; Rodríguez-Torres, Sergio; Roman-Lopes, A.; Román-Zúñiga, Carlos; Rosado, Margarita; Ross, Ashley J.; Rossi, Graziano; Ruan, John; Ruggeri, Rossana; Rykoff, Eli S.; Salazar-Albornoz, Salvador; Salvato, Mara; Sánchez, Ariel G.; Aguado, D. S.; Sánchez-Gallego, José R.; Santana, Felipe A.; Santiago, Basílio Xavier; Sayres, Conor; Schiavon, Ricardo P.; da Silva Schimoia, Jaderson; Schlafly, Edward F.; Schlegel, David J.; Schneider, Donald P.; Schultheis, Mathias; Schuster, William J.; Schwope, Axel; Seo, Hee-Jong; Shao, Zhengyi; Shen, Shiyin; Shetrone, Matthew; Shull, Michael; Simon, Joshua D.; Skinner, Danielle; Skrutskie, M. F.; Slosar, Anže; Smith, Verne V.; Sobeck, Jennifer S.; Sobreira, Flavia; Somers, Garrett; Souto, Diogo; Stark, David V.; Stassun, Keivan; Stauffer, Fritz; Steinmetz, Matthias; Storchi-Bergmann, Thaisa; Streblyanska, Alina; Stringfellow, Guy S.; Suárez, Genaro; Sun, Jing; Suzuki, Nao; Szigeti, Laszlo; Taghizadeh-Popp, Manuchehr; Tang, Baitian; Tao, Charling; Tayar, Jamie; Tembe, Mita; Teske, Johanna; Thakar, Aniruddha R.; Thomas, Daniel; Thompson, Benjamin A.; Tinker, Jeremy L.; Tissera, Patricia; Tojeiro, Rita; Hernandez Toledo, Hector; de la Torre, Sylvain; Tremonti, Christy; Troup, Nicholas W.; Valenzuela, Octavio; Martinez Valpuesta, Inma; Vargas-González, Jaime; Vargas-Magaña, Mariana; Vazquez, Jose Alberto; Villanova, Sandro; Vivek, M.; Vogt, Nicole; Wake, David; Walterbos, Rene; Wang, Yuting; Weaver, Benjamin Alan; Weijmans, Anne-Marie; Weinberg, David H.; Westfall, Kyle B.; Whelan, David G.; Wild, Vivienne; Wilson, John; Wood-Vasey, W. M.; Wylezalek, Dominika; Xiao, Ting; Yan, Renbin; Yang, Meng; Ybarra, Jason E.; Yèche, Christophe; Zakamska, Nadia; Zamora, Olga; Zarrouk, Pauline; Zasowski, Gail; Zhang, Kai; Zhao, Gong-Bo; Zheng, Zheng; Zheng, Zheng; Zhou, Xu; Zhou, Zhi-Min; Zhu, Guangtun B.; Zoccali, Manuela; Zou, Hu

    2017-07-01

    We describe the Sloan Digital Sky Survey IV (SDSS-IV), a project encompassing three major spectroscopic programs. The Apache Point Observatory Galactic Evolution Experiment 2 (APOGEE-2) is observing hundreds of thousands of Milky Way stars at high resolution and high signal-to-noise ratios in the near-infrared. The Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey is obtaining spatially resolved spectroscopy for thousands of nearby galaxies (median z˜ 0.03). The extended Baryon Oscillation Spectroscopic Survey (eBOSS) is mapping the galaxy, quasar, and neutral gas distributions between z˜ 0.6 and 3.5 to constrain cosmology using baryon acoustic oscillations, redshift space distortions, and the shape of the power spectrum. Within eBOSS, we are conducting two major subprograms: the SPectroscopic IDentification of eROSITA Sources (SPIDERS), investigating X-ray AGNs and galaxies in X-ray clusters, and the Time Domain Spectroscopic Survey (TDSS), obtaining spectra of variable sources. All programs use the 2.5 m Sloan Foundation Telescope at the Apache Point Observatory; observations there began in Summer 2014. APOGEE-2 also operates a second near-infrared spectrograph at the 2.5 m du Pont Telescope at Las Campanas Observatory, with observations beginning in early 2017. Observations at both facilities are scheduled to continue through 2020. In keeping with previous SDSS policy, SDSS-IV provides regularly scheduled public data releases; the first one, Data Release 13, was made available in 2016 July.

  19. Identifying Correlates of Young Adults' Weight Behavior: Survey Development

    Science.gov (United States)

    Larson, Nicole; Neumark-Sztainer, Dianne; Story, Mary; van den Berg, Patricia; Hannan, Peter J.

    2011-01-01

    Objective: To describe the development and psychometric properties of survey measures relevant to eating, physical activity, and weight-related behaviors among young adults. Methods: Focus groups and reliability testing guided the development of the Project EAT-III survey. The final survey was completed by 2287 young adults. Results: The…

  20. Overview of the SDSS-IV MaNGA Survey: Mapping nearby Galaxies at Apache Point Observatory

    NARCIS (Netherlands)

    Bundy, Kevin; Bershady, Matthew A.; Law, David R.; Yan, Renbin; Drory, Niv; MacDonald, Nicholas; Wake, David A.; Cherinka, Brian; Sánchez-Gallego, José R.; Weijmans, Anne-Marie; Thomas, Daniel; Tremonti, Christy; Masters, Karen; Coccato, Lodovico; Diamond-Stanic, Aleksandar M.; Aragón-Salamanca, Alfonso; Avila-Reese, Vladimir; Badenes, Carles; Falcón-Barroso, Jésus; Belfiore, Francesco; Bizyaev, Dmitry; Blanc, Guillermo A.; Bland-Hawthorn, Joss; Blanton, Michael R.; Brownstein, Joel R.; Byler, Nell; Cappellari, Michele; Conroy, Charlie; Dutton, Aaron A.; Emsellem, Eric; Etherington, James; Frinchaboy, Peter M.; Fu, Hai; Gunn, James E.; Harding, Paul; Johnston, Evelyn J.; Kauffmann, Guinevere; Kinemuchi, Karen; Klaene, Mark A.; Knapen, Johan H.; Leauthaud, Alexie; Li, Cheng; Lin, Lihwai; Maiolino, Roberto; Malanushenko, Viktor; Malanushenko, Elena; Mao, Shude; Maraston, Claudia; McDermid, Richard M.; Merrifield, Michael R.; Nichol, Robert C.; Oravetz, Daniel; Pan, Kaike; Parejko, John K.; Sanchez, Sebastian F.; Schlegel, David; Simmons, Audrey; Steele, Oliver; Steinmetz, Matthias; Thanjavur, Karun; Thompson, Benjamin A.; Tinker, Jeremy L.; van den Bosch, Remco C. E.; Westfall, Kyle B.; Wilkinson, David; Wright, Shelley; Xiao, Ting; Zhang, Kai

    We present an overview of a new integral field spectroscopic survey called MaNGA (Mapping Nearby Galaxies at Apache Point Observatory), one of three core programs in the fourth-generation Sloan Digital Sky Survey (SDSS-IV) that began on 2014 July 1. MaNGA will investigate the internal kinematic

  1. Tube Maps for Effective Geoscience Career Planning and Development

    Science.gov (United States)

    Keane, C. M.; Wilson, C. E.; Houlton, H. R.

    2013-12-01

    One of the greatest challenges faced by students and new graduates is the advice that they must take charge of their own career planning. This is ironic as new graduates are least prepared to understand the full spectrum of options and the potential pathways to meeting their personal goals. We will examine the rationale, tools, and utility of an approach aimed at assisting individuals in career planning nicknamed a "tube map." In particular, this approach has been used in support of geoscientist recruitment and career planning in major European energy companies. By utilizing information on the occupational sequences of geoscience professionals within an organization or a community, a student or new hire can quickly understand the proven pathways towards their eventual career goals. The tube map visualizes the career pathways of individuals in the form of a subway map, with specific occupations represented as "stations" and pathway interconnections represented as "transfers." The major application of this approach in the energy sector was to demonstrate both the logical career pathways to either senior management or senior technical positions, as well as present the reality that time must be invested in "lower level" jobs, thereby nullifying a persistent overinflated sense of the speed of upward mobility. To this end, we have run a similar occupational analysis on several geoscience employers, including one with somewhat non-traditional geoscience positions and another that would be considered a very traditional employer. We will examine the similarities and differences between the resulting 'tube maps,' critique the tools used to create the maps, and assess the utility of the product in career development planning for geoscience students and new hires.

  2. Aerial radiometric and magnetic survey: Perryton National Topographic Map, Texas/Oklahoma/Kansas. Final report

    International Nuclear Information System (INIS)

    1980-05-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Perryton National Topographic Map NJ14-10 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  3. Aerial radiometric and magnetic survey: Elko National Topographic Map, Nevada, Utah

    International Nuclear Information System (INIS)

    1979-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Elko national Topographic Map NK11-12 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included

  4. Aerial radiometric and magnetic survey, San Angelo National Topographic Map: Texas, West Texas Project. Final report

    International Nuclear Information System (INIS)

    1980-05-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the San Angelo National Topographic Map NH14-1 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium, and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included

  5. Aerial radiometric and magnetic survey: St. Louis national topographic map, Illinois/Missouri. Final report

    International Nuclear Information System (INIS)

    1981-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the St. Louis National Topographic Map NJ15-6 is presented in this report. The airborne data gathered is reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveying map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  6. Aerial radiometric and magnetic survey: Evansville National Topographic Map, Indiana and Kentucky, southeast US Project

    International Nuclear Information System (INIS)

    1980-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Evansville National Topographic Map NJ16-8 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  7. Aerial radiometric and magnetic survey: Winchester National topographic map, Kentucky. Southeast US project

    International Nuclear Information System (INIS)

    1980-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Winchester National Topographic Map NJ16-9 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  8. Aerial radiometric and magnetic survey: Woodward National Topographic Map, Oklahoma, West Texas project

    International Nuclear Information System (INIS)

    1980-05-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Woodward National Topographic Map NJ14-11 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  9. Aerial radiometric and magnetic survey: San Antonio National Topographic Map, Texas. Final report

    International Nuclear Information System (INIS)

    1980-05-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the San Antonio National Topographic Map NH14-8 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium, and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  10. Aerial radiometric and magnetic survey: Quincy National Topographic map, Illinois/Missouri. Final report

    International Nuclear Information System (INIS)

    1981-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Quincy National Topographic Map NJ15-3 is presented in this report. The airborne data gathered is reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnet field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  11. Aerial radiometric and magnetic survey national topographic map: Sonora, Texas. Final report

    International Nuclear Information System (INIS)

    1980-05-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Sonora National Topographic Map NH14-4 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  12. Aerial radiometric and magnetic survey: Burlington National Topographic Map, Illinois/Iowa/Missouri

    International Nuclear Information System (INIS)

    1981-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Burlington National Topographic Map NK15-12 is presented in this report. The airborne data gathered is reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  13. Aerial radiometric and magnetic survey: Death Valley National Topographic Map, Nevada, California

    International Nuclear Information System (INIS)

    1979-01-01

    The results of analysis of the airborne gamma radiation survey flown for the region identified as the Death Valley National Topographic Map NJ11-11 is presented in the bound Volume of this report. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  14. The HectoMAP Cluster Survey. I. redMaPPer Clusters

    Science.gov (United States)

    Sohn, Jubee; Geller, Margaret J.; Rines, Kenneth J.; Hwang, Ho Seong; Utsumi, Yousuke; Diaferio, Antonaldo

    2018-04-01

    We use the dense HectoMAP redshift survey to explore the properties of 104 redMaPPer cluster candidates. The redMaPPer systems in HectoMAP cover the full range of richness and redshift (0.08 systems included in the Subaru/Hyper Suprime-Cam public data release are bona fide clusters. The median number of spectroscopic members per cluster is ∼20. We include redshifts of 3547 member candidates listed in the redMaPPer catalog whether they are cluster members or not. We evaluate the redMaPPer membership probability spectroscopically. The purity (number of real systems) in redMaPPer exceeds 90% even at the lowest richness. Three massive galaxy clusters (M ∼ 2 × 1013 M ⊙) associated with X-ray emission in the HectoMAP region are not included in the public redMaPPer catalog with λ rich > 20, because they lie outside the cuts for this catalog.

  15. The Rings Survey. I. Hα and H I Velocity Maps of Galaxy NGC 2280

    Science.gov (United States)

    Mitchell, Carl J.; Williams, T. B.; Spekkens, Kristine; Lee-Waddell, K.; Kuzio de Naray, Rachel; Sellwood, J. A.

    2015-03-01

    Precise measurements of gas kinematics in the disk of a spiral galaxy can be used to estimate its mass distribution. The Southern African Large Telescope has a large collecting area and field of view, and is equipped with a Fabry-Pérot (FP) interferometer that can measure gas kinematics in a galaxy from the Hα line. To take advantage of this capability, we have constructed a sample of 19 nearby spiral galaxies, the RSS Imaging and Spectroscopy Nearby Galaxy Survey, as targets for detailed study of their mass distributions and have collected much of the needed data. In this paper, we present velocity maps produced from Hα FP interferometry and H i aperture synthesis for one of these galaxies, NGC 2280, and show that the two velocity measurements are generally in excellent agreement. Minor differences can mostly be attributed to the different spatial distributions of the excited and neutral gas in this galaxy, but we do detect some anomalous velocities in our Hα velocity map of the kind that have previously been detected in other galaxies. Models produced from our two velocity maps agree well with each other and our estimates of the systemic velocity and projection angles confirm previous measurements of these quantities for NGC 2280. Based in part on observations obtained with the Southern African Large Telescope (SALT) program 2011-3-RU-003.

  16. THE RINGS SURVEY. I. Hα AND H i VELOCITY MAPS OF GALAXY NGC 2280

    International Nuclear Information System (INIS)

    Mitchell, Carl J.; Williams, T. B.; Sellwood, J. A.; Spekkens, Kristine; Lee-Waddell, K.; Naray, Rachel Kuzio de

    2015-01-01

    Precise measurements of gas kinematics in the disk of a spiral galaxy can be used to estimate its mass distribution. The Southern African Large Telescope has a large collecting area and field of view, and is equipped with a Fabry–Pérot (FP) interferometer that can measure gas kinematics in a galaxy from the Hα line. To take advantage of this capability, we have constructed a sample of 19 nearby spiral galaxies, the RSS Imaging and Spectroscopy Nearby Galaxy Survey, as targets for detailed study of their mass distributions and have collected much of the needed data. In this paper, we present velocity maps produced from Hα FP interferometry and H i aperture synthesis for one of these galaxies, NGC 2280, and show that the two velocity measurements are generally in excellent agreement. Minor differences can mostly be attributed to the different spatial distributions of the excited and neutral gas in this galaxy, but we do detect some anomalous velocities in our Hα velocity map of the kind that have previously been detected in other galaxies. Models produced from our two velocity maps agree well with each other and our estimates of the systemic velocity and projection angles confirm previous measurements of these quantities for NGC 2280

  17. Research Resources Survey: Radiology Junior Faculty Development.

    Science.gov (United States)

    Krupinski, Elizabeth A; Votaw, John R

    2015-07-01

    To assess resources available to junior faculty in US academic radiology departments for research mentorship and funding opportunities and to determine if certain resources are more common in successful programs. An anonymous survey covering scientific environment and research mentorship and was sent to vice-chairs of research of radiology departments. Results were evaluated to identify practices of research programs with respect to mentorship, resources, and opportunities. Academy of Radiology Research's 2012 National Institutes of Health (NIH) grants and awards list was used to determine if environment and practices correlate with funding. There was a 51% response rate. A greater fraction of clinical faculty gets promoted from assistant to associate professor than research faculty. Research faculty overall submits more funding applications. Most programs support start-up costs and K-awards. Over half of the departments have a vice-chair for faculty development, and most have formal mentorship programs. Faculty members are expected to teach, engage in service, publish, and apply for and get research funding within 3 years of hire. Top-tier programs as judged by NIH awards have a combination of MDs who devote >50% effort to research and PhD faculty. Key factors holding back both clinical and research junior faculty development were motivation, resources, and time, although programs reported high availability of resources and support at the department level. Better marketing of resources for junior faculty, effort devoted to mentoring clinical faculty in research, and explicit milestones/expectations for achievement could enhance junior faculty success, promote interest in the clinician–scientist career path for radiologists, and lead to greater research success.

  18. Applying the metro map to software development management

    Science.gov (United States)

    Aguirregoitia, Amaia; Dolado, J. Javier; Presedo, Concepción

    2010-01-01

    This paper presents MetroMap, a new graphical representation model for controlling and managing the software development process. Metromap uses metaphors and visual representation techniques to explore several key indicators in order to support problem detection and resolution. The resulting visualization addresses diverse management tasks, such as tracking of deviations from the plan, analysis of patterns of failure detection and correction, overall assessment of change management policies, and estimation of product quality. The proposed visualization uses a metaphor with a metro map along with various interactive techniques to represent information concerning the software development process and to deal efficiently with multivariate visual queries. Finally, the paper shows the implementation of the tool in JavaFX with data of a real project and the results of testing the tool with the aforementioned data and users attempting several information retrieval tasks. The conclusion shows the results of analyzing user response time and efficiency using the MetroMap visualization system. The utility of the tool was positively evaluated.

  19. Development and preliminary validation of flux map processing code MAPLE

    International Nuclear Information System (INIS)

    Li Wenhuai; Zhang Xiangju; Dang Zhen; Chen Ming'an; Lu Haoliang; Li Jinggang; Wu Yuanbao

    2013-01-01

    The self-reliant flux map processing code MAPLE was developed by China General Nuclear Power Corporation (CGN). Weight coefficient method (WCM), polynomial expand method (PEM) and thin plane spline (TPS) method were applied to fit the deviation between measured and predicted detector signal results for two-dimensional radial plane, to interpolate or extrapolate the non-instrumented location deviation. Comparison of results in the test cases shows that the TPS method can better capture the information of curved fitting lines than the other methods. The measured flux map data of the Lingao Nuclear Power Plant were processed using MAPLE as validation test cases, combined with SMART code. Validation results show that the calculation results of MAPLE are reasonable and satisfied. (authors)

  20. Development of optimized segmentation map in dual energy computed tomography

    Science.gov (United States)

    Yamakawa, Keisuke; Ueki, Hironori

    2012-03-01

    Dual energy computed tomography (DECT) has been widely used in clinical practice and has been particularly effective for tissue diagnosis. In DECT the difference of two attenuation coefficients acquired by two kinds of X-ray energy enables tissue segmentation. One problem in conventional DECT is that the segmentation deteriorates in some cases, such as bone removal. This is due to two reasons. Firstly, the segmentation map is optimized without considering the Xray condition (tube voltage and current). If we consider the tube voltage, it is possible to create an optimized map, but unfortunately we cannot consider the tube current. Secondly, the X-ray condition is not optimized. The condition can be set empirically, but this means that the optimized condition is not used correctly. To solve these problems, we have developed methods for optimizing the map (Method-1) and the condition (Method-2). In Method-1, the map is optimized to minimize segmentation errors. The distribution of the attenuation coefficient is modeled by considering the tube current. In Method-2, the optimized condition is decided to minimize segmentation errors depending on tube voltagecurrent combinations while keeping the total exposure constant. We evaluated the effectiveness of Method-1 by performing a phantom experiment under the fixed condition and of Method-2 by performing a phantom experiment under different combinations calculated from the total exposure constant. When Method-1 was followed with Method-2, the segmentation error was reduced from 37.8 to 13.5 %. These results demonstrate that our developed methods can achieve highly accurate segmentation while keeping the total exposure constant.

  1. Group concept mapping for evaluation and development in nursing education.

    Science.gov (United States)

    Hagell, Peter; Edfors, Ellinor; Hedin, Gita; Westergren, Albert; Hammarlund, Catharina Sjödahl

    2016-09-01

    The value of course evaluations has been debated since they frequently fail to capture the complexity of education and learning. Group Concept Mapping (GCM), a participant-centred mixed-method was explored as a tool for evaluation and development in nursing education and to better understand students' learning experiences, using data from a GCM-based evaluation of a research training assignment integrating clinical practice and research data collection within a Swedish university nursing program. Student nurses (n = 47) participated in a one-day GCM exercise. Focus group brainstorming regarding experiences from the assignment that the students considered important and instructive yielded 98 statements that were individually sorted based on their student-perceived relationships, and rated regarding their importance/instructiveness and need for development. Quantitative analysis of sort data produced a 2-dimensional map representing their conceptual relationships, and eight conceptual areas. Average cluster ratings were plotted relative to each other and provided a decision aid for development and planning by identifying areas (i.e., "Research methodology", "Patients' perspectives", and "Interviewer role") considered highly important/instructive and in high need for development. These experiences illustrate the use and potential of GCM as an interactive participant-centred approach to evaluation, planning and development in nursing and other higher health science educations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. The transfer from survey (map-like) to route representations into Virtual Reality Mazes: effect of age and cerebral lesion.

    Science.gov (United States)

    Carelli, Laura; Rusconi, Maria Luisa; Scarabelli, Chiara; Stampatori, Chiara; Mattioli, Flavia; Riva, Giuseppe

    2011-01-31

    To go from one place to another, we routinely generate internal representations of surrounding spaces, which can include egocentric (body-centred) and allocentric (world-centred) coordinates, combined into route and survey representations.Recent studies have shown how both egocentric and allocentric representations exist in parallel and are joined to support behaviour according to the task.Our study investigated the transfer from survey (map-like) to route representations in healthy and brain-damaged subjects. The aim was two-fold: first, to understand how this ability could change with age in a sample of healthy participants, aged from 40 to 71 years old; second, to investigate how it is affected after a brain lesion in a 8 patients' sample, with reference to specific neuropsychological frames. Participants were first required to perform the paper and pencil version of eight mazes, then to translate the map-like paths into egocentric routes, in order to find the right way into equivalent Virtual Reality (VR) mazes.Patients also underwent a comprehensive neuropsychological evaluation, including a specific investigation of some topographical orientation components. As regards the healthy sample, we found age-related deterioration in VR task performance. While education level and gender were not found to be related to performance, global cognitive level (Mini Mental State Examination), previous experience with computer and fluidity of navigation into the VR appeared to influence VR task results.Considering the clinical sample, there was a difficulty in performing the VR Maze task; executive functions and visuo-spatial abilities deficits appeared to be more relevant for predicting patients' results. Our study suggests the importance of developing tools aimed at investigating the survey to route transfer ability in both healthy elderly and clinical samples, since this skill seems high cognitive demanding and sensitive to cognitive decline.Human-computer interaction

  3. The transfer from survey (map-like to route representations into Virtual Reality Mazes: effect of age and cerebral lesion

    Directory of Open Access Journals (Sweden)

    Stampatori Chiara

    2011-01-01

    Full Text Available Abstract Background To go from one place to another, we routinely generate internal representations of surrounding spaces, which can include egocentric (body-centred and allocentric (world-centred coordinates, combined into route and survey representations. Recent studies have shown how both egocentric and allocentric representations exist in parallel and are joined to support behaviour according to the task. Our study investigated the transfer from survey (map-like to route representations in healthy and brain-damaged subjects. The aim was two-fold: first, to understand how this ability could change with age in a sample of healthy participants, aged from 40 to 71 years old; second, to investigate how it is affected after a brain lesion in a 8 patients' sample, with reference to specific neuropsychological frames. Methods Participants were first required to perform the paper and pencil version of eight mazes, then to translate the map-like paths into egocentric routes, in order to find the right way into equivalent Virtual Reality (VR mazes. Patients also underwent a comprehensive neuropsychological evaluation, including a specific investigation of some topographical orientation components. Results As regards the healthy sample, we found age-related deterioration in VR task performance. While education level and gender were not found to be related to performance, global cognitive level (Mini Mental State Examination, previous experience with computer and fluidity of navigation into the VR appeared to influence VR task results. Considering the clinical sample, there was a difficulty in performing the VR Maze task; executive functions and visuo-spatial abilities deficits appeared to be more relevant for predicting patients' results. Conclusions Our study suggests the importance of developing tools aimed at investigating the survey to route transfer ability in both healthy elderly and clinical samples, since this skill seems high cognitive

  4. Development of erosion risk map using fuzzy logic approach

    Directory of Open Access Journals (Sweden)

    Fauzi Manyuk

    2017-01-01

    Full Text Available Erosion-hazard assessment is an important aspect in the management of a river basin such as Siak River Basin, Riau Province, Indonesia. This study presents an application of fuzzy logic approach to develop erosion risk map based on geographic information system. Fuzzy logic is a computing approach based on “degrees of truth” rather than the usual “true or false” (1 or 0 Boolean logic on which the modern computer is based. The results of the erosion risk map were verified by using field measurements. The verification result shows that the parameter of soil-erodibility (K indicates a good agreement with field measurement data. The classification of soil-erodibility (K as the result of validation were: very low (0.0–0.1, medium (0.21-0.32, high (0.44-0.55 and very high (0.56-0.64. The results obtained from this study show that the erosion risk map of Siak River Basin were dominantly classified as medium level which cover about 68.54%. The other classifications were high and very low erosion level which cover about 28.84% and 2.61% respectively.

  5. Digital bedrock mapping at the Geological Survey of Norway: BGS SIGMA tool and in-house database structure

    Science.gov (United States)

    Gasser, Deta; Viola, Giulio; Bingen, Bernard

    2016-04-01

    Since 2010, the Geological Survey of Norway has been implementing and continuously developing a digital workflow for geological bedrock mapping in Norway, from fieldwork to final product. Our workflow is based on the ESRI ArcGIS platform, and we use rugged Windows computers in the field. Three different hardware solutions have been tested over the past 5 years (2010-2015). (1) Panasonic Toughbook CE-19 (2.3 kg), (2) Panasonic Toughbook CF H2 Field (1.6 kg) and (3) Motion MC F5t tablet (1.5 kg). For collection of point observations in the field we mainly use the SIGMA Mobile application in ESRI ArcGIS developed by the British Geological Survey, which allows the mappers to store georeferenced comments, structural measurements, sample information, photographs, sketches, log information etc. in a Microsoft Access database. The application is freely downloadable from the BGS websites. For line- and polygon work we use our in-house database, which is currently under revision. Our line database consists of three feature classes: (1) bedrock boundaries, (2) bedrock lineaments, and (3) bedrock lines, with each feature class having up to 24 different attribute fields. Our polygon database consists of one feature class with 38 attribute fields enabling to store various information concerning lithology, stratigraphic order, age, metamorphic grade and tectonic subdivision. The polygon and line databases are coupled via topology in ESRI ArcGIS, which allows us to edit them simultaneously. This approach has been applied in two large-scale 1:50 000 bedrock mapping projects, one in the Kongsberg domain of the Sveconorwegian orogen, and the other in the greater Trondheim area (Orkanger) in the Caledonian belt. The mapping projects combined collection of high-resolution geophysical data, digital acquisition of field data, and collection of geochronological, geochemical and petrological data. During the Kongsberg project, some 25000 field observation points were collected by eight

  6. Harmonic maps of the hyperbolic space and development of singularities in wave maps and Yang-Mills fields

    International Nuclear Information System (INIS)

    Cazenave, T.; Shatah, J.; Tahvildar-Zadeh, A.S.

    1998-01-01

    In this article we explore some of the connections between the theories of Yang-Mills fields, wave maps, and harmonic maps. It has been shown that the search for similarity solutions of wave maps leads to harmonic maps of the hyperbolic space. On the other hand, Glassey and Strauss have shown that the equations for an SO(3)-equivariant Yang-Mills connection on the Minkowski space R 3,1 with gauge group SU(2) reduce to a certain nonlinear wave equation, which we can now identify as a wave map on R 1,1 . More generally, we will here show the reduction under equivariance of a Yang-Mills system on the Minkowski space R n,1 to a wave map system on R n-2,1 in the specific case of SO(n) bundles with SO(n) symmetry. We then prove for odd n the existence of equivariant harmonic maps from the hyperbolic space H n that are smooth at the ideal boundary of H n , thus establishing the existence of similarity solutions for equivariant wave maps and Yang-Mills fields. As a consequence we show that for n ≥ 7, it is possible to have a wave map into a negatively curved target manifold that develops from smooth initial data and blows up in finite time, in sharp contrast to the elliptic case of harmonic maps. Finally we show how these singular solutions can be lifted to one dimension higher to produce singular travelling waves. (orig.)

  7. A neurochemical map of the developing amphioxus nervous system

    Directory of Open Access Journals (Sweden)

    Candiani Simona

    2012-06-01

    Full Text Available Abstract Background Amphioxus, representing the most basal group of living chordates, is the best available proxy for the last invertebrate ancestor of the chordates. Although the central nervous system (CNS of amphioxus comprises only about 20,000 neurons (as compared to billions in vertebrates, the developmental genetics and neuroanatomy of amphioxus are strikingly vertebrate-like. In the present study, we mapped the distribution of amphioxus CNS cells producing distinctive neurochemicals. To this end, we cloned genes encoding biosynthetic enzymes and/or transporters of the most common neurotransmitters and assayed their developmental expression in the embryo and early larva. Results By single and double in situ hybridization experiments, we identified glutamatergic, GABAergic/glycinergic, serotonergic and cholinergic neurons in developing amphioxus. In addition to characterizing the distribution of excitatory and inhibitory neurons in the developing amphioxus CNS, we observed that cholinergic and GABAergic/glycinergic neurons are segmentally arranged in the hindbrain, whereas serotonergic, glutamatergic and dopaminergic neurons are restricted to specific regions of the cerebral vesicle and the hindbrain. We were further able to identify discrete groups of GABAergic and glutamatergic interneurons and cholinergic motoneurons at the level of the primary motor center (PMC, the major integrative center of sensory and motor stimuli of the amphioxus nerve cord. Conclusions In this study, we assessed neuronal differentiation in the developing amphioxus nervous system and compiled the first neurochemical map of the amphioxus CNS. This map is a first step towards a full characterization of the neurotransmitter signature of previously described nerve cell types in the amphioxus CNS, such as motoneurons and interneurons.

  8. Mapping the scope of occupational therapy practice in palliative care: A European Association for Palliative Care cross-sectional survey.

    Science.gov (United States)

    Eva, Gail; Morgan, Deidre

    2018-05-01

    Occupational therapists play an integral role in the care of people with life-limiting illnesses. However, little is known about the scope of occupational therapy service provision in palliative care across Europe and factors influencing service delivery. This study aimed to map the scope of occupational therapy palliative care interventions across Europe and to explore occupational therapists' perceptions of opportunities and challenges when delivering and developing palliative care services. A 49-item online cross-sectional survey comprised of fixed and free text responses was securely hosted via the European Association for Palliative Care website. Survey design, content and recruitment processes were reviewed and formally approved by the European Association for Palliative Care Board of Directors. Descriptive statistics and thematic analysis were used to analyse data. Setting/respondents: Respondents were European occupational therapists whose caseload included palliative care recipients (full-time or part-time). In total, 237 valid responses were analysed. Findings demonstrated a consistency in occupational therapy practice in palliative care between European countries. Clinician time was prioritised towards indirect patient care, with limited involvement in service development, leadership and research. A need for undergraduate and postgraduate education was identified. Organisational expectations and understanding of the scope of the occupational therapy role constrain the delivery of services to support patients and carers. Further development of occupational therapy in palliative care, particularly capacity building in leadership and research activities, is warranted. There is a need for continuing education and awareness raising of the role of occupational therapy in palliative care.

  9. Development of a sensor platform for roadway mapping : part b - mapping the road fog lines : final report.

    Science.gov (United States)

    2015-04-01

    Our objective is the development and evaluation of a low-cost, vehicle-mounted sensor suite capable of generating : map data with lane and road boundary information accurate to the 10 cm (4 in) level. Such a map could be used for : a number of differ...

  10. Towards the Development of a Molecular Map in Switchgrass: I. Microsatellite Marker Development; ANNUAL

    International Nuclear Information System (INIS)

    Gunter, L.E.

    2001-01-01

    The long-term goal of the switchgrass breeding program is to improve regionally adapted varieties and increase biomass yield and feedstock quality. Although, to some extent, biomass yields are dependent on environmental constraints, increased yield can be achieved through the development of genotypes with improved seasonal adaptation, tolerance to unfavorable environmental conditions, and improved resistance to pest and disease. To date, improvement in switchgrass has relied on recurrent breeding strategies based on phenotypic or genotypic selection. Yield improvements have been modest by this method. If we expect to make significant increase in yields, we need tools that will allow us to map complex traits and uncover the genes that influence them. A genetic linkage map could be a powerful tool for accelerating switchgrass development through marker-assisted selection, breeding and recombination. This type of mapping requires the development of markers that can be associated with phenotypic traits in a population of known pedigree. The most commonly used markers for mapping include restriction fragment length polymorphisms (RFLP) and simple sequence repeats (SSR). At ORNL, we have been concentrating on the development of SSR markers, while our colleagues at the University of Georgia are developing RFLP markers in order to select parents to produce a mapping population and from there to create a framework map from(approx)100 F1 progeny

  11. Mapping the logics in practice oriented competence development

    DEFF Research Database (Denmark)

    Tamborg, Andreas Lindenskov; Allsopp, Benjamin B.; Fougt, Simon Skov

    In this paper we investigate the role of the local supervisor when implementing a mathematics teacher training program based on Action Learning (Misfeldt et al. 2014, Plauborg et al. 2007). Using data from interviews of teachers, local supervisors and school managers we examine the arising...... expectations on the local supervisor and how these expectations influence the program’s ability to support teachers in their professional development. We do so by using Clarke’s (2009) Situational Analysis and Arcform notation (Allsopp 2013) to map the actors’ relation to the supervisor. We see that the local...

  12. Strategic plan for the National Mapping Divison of the U.S. Geological Survey

    Science.gov (United States)

    ,

    1997-01-01

    The National Mapping Division (NMD) has developed this comprehensive strategic plan to chart its course over the next decade. To meet the challenge of the future, the NMD is changing its program emphasis, methods of responding to customer need and business practices. The NMD Strategic Plan identifies the new direction for the Division through a series of goals and actions for managers to use in formulating plans, establishing program emphasis, and determining resource needs and allocations into the next century.

  13. Development Planning of Tourist Village Using Participatory Mapping (Case study: Mambal Village, Badung Regency, Indonesia)

    Science.gov (United States)

    Arida, I. N. S.; Wiguna, P. P. K.; Narka, I. W.; Febrianti, N. K. O.

    2017-12-01

    Tourism sector is the highest source of income in Badung Regency so it is interesting to see the development of tourist village as one of the alternative tourist destinations in Badung Regency. Most of the village areas in Badung Regency do not have policies, vision and mission as an effort to develop the village into a tourist village. As a result the role of tourist village does not grow in terms of economic and social community. The purpose of this research is to determine and to map the tourism development plan using participatory mapping. The methodology used in this research is field surveys and interviews for data collection and participatory mapping to map the development plan to support tourism. Mambal village is located in Sub-district of Abiansemal, Badung Regency, Indonesia. Mambal village has the potential to become a tourism village because it is supported by the uniqueness of nature and tradition. Mambal village passed by Ayung river, where along the river there are beautiful cliffs which potential to develop as adventure tourism. There is also Senaung Pengibul Cave with a length of more than 15 meters and is wide enough to pass. Mambal village also has a spiritual tour of Pura Demung and Pancoran Pitu, which has a magical story. Currently farmers in Mambal Village are focusing on developing organic farming, of which 38% of the rice fields present in Mambal are pure organic that produces organic rice. Around the rice field area is also created a jogging track for visitors while enjoying the natural beauty of rice fields. Farmers also cultivate oyster mushrooms. In addition, Mambal Village Community also produces handicraft products that are woven in the form of symmetrical Endek (traditional fabrics) and processed products from used goods such as bags, wallets, pencil boxes and others.

  14. Social Capital: Its Constructs and Survey Development

    Science.gov (United States)

    Enfield, Richard P.; Nathaniel, Keith C.

    2013-01-01

    This article reports on experiences and methods of adapting a valid adult social capital assessment to youth audiences in order to measure social capital and sense of place. The authors outline the process of adapting, revising, prepiloting, piloting, and administering a youth survey exploring young people's sense of community, involvement in the…

  15. Theory for the alignment of cortical feature maps during development.

    Science.gov (United States)

    Bressloff, Paul C; Oster, Andrew M

    2010-08-01

    We present a developmental model of ocular dominance column formation that takes into account the existence of an array of intrinsically specified cytochrome oxidase blobs. We assume that there is some molecular substrate for the blobs early in development, which generates a spatially periodic modulation of experience-dependent plasticity. We determine the effects of such a modulation on a competitive Hebbian mechanism for the modification of the feedforward afferents from the left and right eyes. We show how alternating left and right eye dominated columns can develop, in which the blobs are aligned with the centers of the ocular dominance columns and receive a greater density of feedforward connections, thus becoming defined extrinsically. More generally, our results suggest that the presence of periodically distributed anatomical markers early in development could provide a mechanism for the alignment of cortical feature maps.

  16. Theory for the alignment of cortical feature maps during development

    KAUST Repository

    Bressloff, Paul C.

    2010-08-23

    We present a developmental model of ocular dominance column formation that takes into account the existence of an array of intrinsically specified cytochrome oxidase blobs. We assume that there is some molecular substrate for the blobs early in development, which generates a spatially periodic modulation of experience-dependent plasticity. We determine the effects of such a modulation on a competitive Hebbian mechanism for the modification of the feedforward afferents from the left and right eyes. We show how alternating left and right eye dominated columns can develop, in which the blobs are aligned with the centers of the ocular dominance columns and receive a greater density of feedforward connections, thus becoming defined extrinsically. More generally, our results suggest that the presence of periodically distributed anatomical markers early in development could provide a mechanism for the alignment of cortical feature maps. © 2010 The American Physical Society.

  17. U.S. Geological Survey ArcMap Sediment Classification tool

    Science.gov (United States)

    O'Malley, John

    2007-01-01

    The U.S. Geological Survey (USGS) ArcMap Sediment Classification tool is a custom toolbar that extends the Environmental Systems Research Institute, Inc. (ESRI) ArcGIS 9.2 Desktop application to aid in the analysis of seabed sediment classification. The tool uses as input either a point data layer with field attributes containing percentage of gravel, sand, silt, and clay or four raster data layers representing a percentage of sediment (0-100%) for the various sediment grain size analysis: sand, gravel, silt and clay. This tool is designed to analyze the percent of sediment at a given location and classify the sediments according to either the Folk (1954, 1974) or Shepard (1954) as modified by Schlee(1973) classification schemes. The sediment analysis tool is based upon the USGS SEDCLASS program (Poppe, et al. 2004).

  18. The Sloan Digital Sky Survey Reverberation Mapping Project: Composite Lags at z ≤ 1

    Science.gov (United States)

    Li, Jennifer; Shen, Yue; Horne, Keith; Brandt, W. N.; Greene, Jenny E.; Grier, C. J.; Ho, Luis C.; Kochanek, Chris; Schneider, Donald P.; Trump, Jonathan R.; Dawson, Kyle S.; Pan, Kaike; Bizyaev, Dmitry; Oravetz, Daniel; Simmons, Audrey; Malanushenko, Elena

    2017-09-01

    We present composite broad-line region (BLR) reverberation mapping lag measurements for Hα, Hβ, He II λ4686, and Mg II for a sample of 144, z ≲ 1 quasars from the Sloan Digital Sky Survey Reverberation Mapping (SDSS-RM) project. Using only the 32-epoch spectroscopic light curves in the first six-month season of SDSS-RM observations, we compile correlation function measurements for individual objects and then coadd them to allow the measurement of the average lags for our sample at mean redshifts of 0.4 (for Hα) and ˜0.65 (for the other lines). At similar quasar luminosities and redshifts, the sample-averaged lag decreases in the order of Mg II, Hα, Hβ, and He II. This decrease in lags is accompanied by an increase in the mean line width of the four lines, and is roughly consistent with the virialized motion for BLR gas in photoionization equilibrium. These are among the first RM measurements of stratified BLR structure at z > 0.3. Dividing our sample by luminosity, Hα shows clear evidence of increasing lags with luminosity, consistent with the expectation from the measured BLR size-luminosity relation based on Hβ. The other three lines do not show a clear luminosity trend in their average lags due to the limited dynamic range of luminosity probed and the poor average correlation signals in the divided samples, a situation that will be improved with the incorporation of additional photometric and spectroscopic data from SDSS-RM. We discuss the utility and caveats of composite lag measurements for large statistical quasar samples with reverberation mapping data.

  19. The Sloan Digital Sky Survey Reverberation Mapping Project: Composite Lags at z ≤ 1

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jennifer; Shen, Yue [Department of Astronomy, University of Illinois at Urbana-Champaign, Urbana, IL 61801 (United States); Horne, Keith [SUPA Physics/Astronomy, Univ. of St. Andrews, St. Andrews KY16 9SS (United Kingdom); Brandt, W. N.; Grier, C. J.; Schneider, Donald P. [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA, 16802 (United States); Greene, Jenny E. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States); Ho, Luis C. [Kavli Institute for Astronomy and Astrophysics, Peking University, Beijing 100871 (China); Kochanek, Chris [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Trump, Jonathan R. [Department of Physics, University of Connecticut, 2152 Hillside Road, Unit 3046, Storrs, CT 06269 (United States); Dawson, Kyle S. [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States); Pan, Kaike; Bizyaev, Dmitry; Oravetz, Daniel; Simmons, Audrey; Malanushenko, Elena [Apache Point Observatory and New Mexico State University, P.O. Box 59, Sunspot, NM, 88349-0059 (United States)

    2017-09-01

    We present composite broad-line region (BLR) reverberation mapping lag measurements for H α , H β , He ii λ 4686, and Mg ii for a sample of 144, z ≲ 1 quasars from the Sloan Digital Sky Survey Reverberation Mapping (SDSS-RM) project. Using only the 32-epoch spectroscopic light curves in the first six-month season of SDSS-RM observations, we compile correlation function measurements for individual objects and then coadd them to allow the measurement of the average lags for our sample at mean redshifts of 0.4 (for H α ) and ∼0.65 (for the other lines). At similar quasar luminosities and redshifts, the sample-averaged lag decreases in the order of Mg ii, H α , H β , and He ii. This decrease in lags is accompanied by an increase in the mean line width of the four lines, and is roughly consistent with the virialized motion for BLR gas in photoionization equilibrium. These are among the first RM measurements of stratified BLR structure at z > 0.3. Dividing our sample by luminosity, H α shows clear evidence of increasing lags with luminosity, consistent with the expectation from the measured BLR size–luminosity relation based on H β . The other three lines do not show a clear luminosity trend in their average lags due to the limited dynamic range of luminosity probed and the poor average correlation signals in the divided samples, a situation that will be improved with the incorporation of additional photometric and spectroscopic data from SDSS-RM. We discuss the utility and caveats of composite lag measurements for large statistical quasar samples with reverberation mapping data.

  20. The Sloan Digital Sky Survey Reverberation Mapping Project: Composite Lags at z ≤ 1

    International Nuclear Information System (INIS)

    Li, Jennifer; Shen, Yue; Horne, Keith; Brandt, W. N.; Grier, C. J.; Schneider, Donald P.; Greene, Jenny E.; Ho, Luis C.; Kochanek, Chris; Trump, Jonathan R.; Dawson, Kyle S.; Pan, Kaike; Bizyaev, Dmitry; Oravetz, Daniel; Simmons, Audrey; Malanushenko, Elena

    2017-01-01

    We present composite broad-line region (BLR) reverberation mapping lag measurements for H α , H β , He ii λ 4686, and Mg ii for a sample of 144, z ≲ 1 quasars from the Sloan Digital Sky Survey Reverberation Mapping (SDSS-RM) project. Using only the 32-epoch spectroscopic light curves in the first six-month season of SDSS-RM observations, we compile correlation function measurements for individual objects and then coadd them to allow the measurement of the average lags for our sample at mean redshifts of 0.4 (for H α ) and ∼0.65 (for the other lines). At similar quasar luminosities and redshifts, the sample-averaged lag decreases in the order of Mg ii, H α , H β , and He ii. This decrease in lags is accompanied by an increase in the mean line width of the four lines, and is roughly consistent with the virialized motion for BLR gas in photoionization equilibrium. These are among the first RM measurements of stratified BLR structure at z > 0.3. Dividing our sample by luminosity, H α shows clear evidence of increasing lags with luminosity, consistent with the expectation from the measured BLR size–luminosity relation based on H β . The other three lines do not show a clear luminosity trend in their average lags due to the limited dynamic range of luminosity probed and the poor average correlation signals in the divided samples, a situation that will be improved with the incorporation of additional photometric and spectroscopic data from SDSS-RM. We discuss the utility and caveats of composite lag measurements for large statistical quasar samples with reverberation mapping data.

  1. Quasar Accretion Disk Sizes With Continuum Reverberation Mapping From the Dark Energy Survey

    Energy Technology Data Exchange (ETDEWEB)

    Mudd, D.; et al.

    2017-11-30

    We present accretion disk size measurements for 15 luminous quasars at $0.7 \\leq z \\leq 1.9$ derived from $griz$ light curves from the Dark Energy Survey. We measure the disk sizes with continuum reverberation mapping using two methods, both of which are derived from the expectation that accretion disks have a radial temperature gradient and the continuum emission at a given radius is well-described by a single blackbody. In the first method we measure the relative lags between the multiband light curves, which provides the relative time lag between shorter and longer wavelength variations. The second method fits the model parameters for the canonical Shakura-Sunyaev thin disk directly rather than solving for the individual time lags between the light curves. Our measurements demonstrate good agreement with the sizes predicted by this model for accretion rates between 0.3-1 times the Eddington rate. These results are also in reasonable agreement with disk size measurements from gravitational microlensing studies of strongly lensed quasars, as well as other photometric reverberation mapping results.

  2. Construction of Intelligence Knowledge Map for Complex Product Development

    Directory of Open Access Journals (Sweden)

    Yan-jie LV,

    2013-11-01

    Full Text Available The complex product design and development is an integrated discipline. A lot of knowledge overloads and knowledge trek phenomenon appeared with the raise of product complexity and the explosion of knowledge and information. To improve the utilization efficiency of the knowledge using and shorten the time and effort spent on the Knowledge screening, avoid missing the knowledge, which is required, the paper proposes a method for the intelligence knowledge map construct model based on knowledge requirements and knowledge connection. Analyzing the context information of the user and giving the method of acquiring the knowledge requirement based on the context information and the user’s personal knowledge structure. This method can get the knowledge requirements of the users to generate the knowledge retrieval expressions to obtain the knowledge points and then construct the intelligent knowledge map through the analysis of multiple dimensions and using the knowledge related to the development of aircraft landing gear as an example to verify the feasibility of this method.

  3. Capacity Building for Institutional Development in Surveying and Land Management

    DEFF Research Database (Denmark)

    Enemark, Stig

    2006-01-01

    for developing the basic capacity in terms of educational programs and professional organizations; and 3) Global development through cooperation with other international NGO´s such as the UN agencies, the World Bank and sister organizations in surveying. FIG, this way, plays a strong role, in improving...... for institutional development within surveying and land management. Finally the paper discusses the role of FIG in this regard. Three areas are identified: 1) Professional development through providing a global forum for exchange of experiences and new developments; 2) Institutional development through support...... the capacity in surveying and land management at a global scale....

  4. The Open Cluster Chemical Abundances and Mapping (OCCAM) Survey: Galactic Neutron CaptureAbundance Gradients

    Science.gov (United States)

    O'Connell, Julia; Frinchaboy, Peter M.; Shetrone, Matthew D.; Melendez, Matthew; Cunha, Katia; Majewski, Steven R.; Zasowski, Gail; APOGEE Team

    2017-06-01

    The evolution of elements, as a function or age, throughout the Milky Way disk provides a key constraint for galaxy evolution models. In an effort to provide these constraints, we have conducted an investigation into the r- and s- process elemental abundances for a large sample of open clusters as part of an optical follow-up to the SDSS-III/APOGEE-1 survey. Stars were identified as cluster members by the Open Cluster Chemical Abundance & Mapping (OCCAM) survey, which culls member candidates by radial velocity, metallicity and proper motion from the observed APOGEE sample. To obtain data for neutron capture elements in these clusters, we conducted a long-term observing campaign covering three years (2013-2016) using the McDonald Observatory Otto Struve 2.1-m telescope and Sandiford Cass Echelle Spectrograph (R ~ 60,000). We present Galactic neutron capture abundance gradients using 30+ clusters, within 6 kpc of the Sun, covering a range of ages from ~80 Myr to ~10 Gyr .

  5. THE SLOAN DIGITAL SKY SURVEY REVERBERATION MAPPING PROJECT: RAPID C iv BROAD ABSORPTION LINE VARIABILITY

    International Nuclear Information System (INIS)

    Grier, C. J.; Brandt, W. N.; Trump, J. R.; Schneider, D. P.; Hall, P. B.; Shen, Yue; Vivek, M.; Dawson, K. S.; Ak, N. Filiz; Chen, Yuguang; Denney, K. D.; Kochanek, C. S.; Peterson, B. M.; Green, Paul J.; Jiang, Linhua; McGreer, Ian D.; Pâris, I.; Tao, Charling; Wood-Vasey, W. M.; Bizyaev, Dmitry

    2015-01-01

    We report the discovery of rapid variations of a high-velocity C iv broad absorption line trough in the quasar SDSS J141007.74+541203.3. This object was intensively observed in 2014 as a part of the Sloan Digital Sky Survey Reverberation Mapping Project, during which 32 epochs of spectroscopy were obtained with the Baryon Oscillation Spectroscopic Survey spectrograph. We observe significant (>4σ) variability in the equivalent width (EW) of the broad (∼4000 km s −1 wide) C iv trough on rest-frame timescales as short as 1.20 days (∼29 hr), the shortest broad absorption line variability timescale yet reported. The EW varied by ∼10% on these short timescales, and by about a factor of two over the duration of the campaign. We evaluate several potential causes of the variability, concluding that the most likely cause is a rapid response to changes in the incident ionizing continuum. If the outflow is at a radius where the recombination rate is higher than the ionization rate, the timescale of variability places a lower limit on the density of the absorbing gas of n e ≳ 3.9 × 10 5 cm −3 . The broad absorption line variability characteristics of this quasar are consistent with those observed in previous studies of quasars, indicating that such short-term variability may in fact be common and thus can be used to learn about outflow characteristics and contributions to quasar/host-galaxy feedback scenarios

  6. Nano Mapper: an Internet knowledge mapping system for nanotechnology development

    International Nuclear Information System (INIS)

    Li Xin; Hu, Daning; Dang Yan; Chen Hsinchun; Roco, Mihail C.; Larson, Catherine A.; Chan, Joyce

    2009-01-01

    Nanotechnology research has experienced rapid growth in recent years. Advances in information technology enable efficient investigation of publications, their contents, and relationships for large sets of nanotechnology-related documents in order to assess the status of the field. This paper presents the development of a new knowledge mapping system, called Nano Mapper (http://nanomapper.eller.arizona.eduhttp://nanomapper.eller.arizona.edu), which integrates the analysis of nanotechnology patents and research grants into a Web-based platform. The Nano Mapper system currently contains nanotechnology-related patents for 1976-2006 from the United States Patent and Trademark Office (USPTO), European Patent Office (EPO), and Japan Patent Office (JPO), as well as grant documents from the U.S. National Science Foundation (NSF) for the same time period. The system provides complex search functionalities, and makes available a set of analysis and visualization tools (statistics, trend graphs, citation networks, and content maps) that can be applied to different levels of analytical units (countries, institutions, technical fields) and for different time intervals. The paper shows important nanotechnology patenting activities at USPTO for 2005-2006 identified through the Nano Mapper system.

  7. Nano Mapper: an Internet knowledge mapping system for nanotechnology development

    Energy Technology Data Exchange (ETDEWEB)

    Li Xin, E-mail: xinli@eller.arizona.edu; Hu, Daning, E-mail: hud@eller.arizona.edu; Dang Yan, E-mail: ydang@eller.arizona.edu; Chen Hsinchun, E-mail: hchen@eller.arizona.ed [University of Arizona, Departmet of Management Information Systems, Eller College of Management (United States); Roco, Mihail C., E-mail: mroco@nsf.go [National Science Foundation (United States); Larson, Catherine A., E-mail: cal@eller.arizona.edu; Chan, Joyce, E-mail: joycepchan@eller.arizona.ed [University of Arizona, Department of Management Information Systems, Eller College of Management (United States)

    2009-04-15

    Nanotechnology research has experienced rapid growth in recent years. Advances in information technology enable efficient investigation of publications, their contents, and relationships for large sets of nanotechnology-related documents in order to assess the status of the field. This paper presents the development of a new knowledge mapping system, called Nano Mapper (http://nanomapper.eller.arizona.eduhttp://nanomapper.eller.arizona.edu), which integrates the analysis of nanotechnology patents and research grants into a Web-based platform. The Nano Mapper system currently contains nanotechnology-related patents for 1976-2006 from the United States Patent and Trademark Office (USPTO), European Patent Office (EPO), and Japan Patent Office (JPO), as well as grant documents from the U.S. National Science Foundation (NSF) for the same time period. The system provides complex search functionalities, and makes available a set of analysis and visualization tools (statistics, trend graphs, citation networks, and content maps) that can be applied to different levels of analytical units (countries, institutions, technical fields) and for different time intervals. The paper shows important nanotechnology patenting activities at USPTO for 2005-2006 identified through the Nano Mapper system.

  8. Two-dimensional Model of Ciliwung River Flood in DKI Jakarta for Development of the Regional Flood Index Map

    Directory of Open Access Journals (Sweden)

    Adam Formánek

    2013-12-01

    Full Text Available The objective of this study was to present a sophisticated method of developing supporting material for flood control implementation in DKI Jakarta. High flow rates in the Ciliwung River flowing through Jakarta regularly causes extensive flooding in the rainy season. The affected area comprises highly densely populated villages. For developing an efficient early warning system in view of decreasing the vulnerability of the locations a flood index map has to be available. This study analyses the development of a flood risk map of the inundation area based on a two-dimensional modeling using FESWMS. The reference event used for the model was the most recent significant flood in 2007. The resulting solution represents flood characteristics such as inundation area, inundation depth and flow velocity. Model verification was performed by confrontation of the results with survey data. The model solution was overlaid with a street map of Jakarta. Finally, alternatives for flood mitigation measures are discussed.

  9. Mapping organism expression levels at cellular resolution in developing Drosophila

    Science.gov (United States)

    Knowles, David W.; Keranen, Soile; Biggin, Mark D.; Sudar, Damir

    2002-05-01

    The development of an animal embryo is orchestrated by a network of genetically determined, temporal and spatial gene expression patterns that determine the animals final form. To understand such networks, we are developing novel quantitative optical imaging techniques to map gene expression levels at cellular and sub-cellular resolution within pregastrula Drosophila. Embryos at different stages of development are labeled for total DNA and specific gene products using different fluorophors and imaged in 3D with confocal microscopy. Innovative steps have been made which allow the DNA-image to be automatically segmented to produce a morphological mask of the individual nuclear boundaries. For each stage of development an average morphology is chosen to which images from different embryo are compared. The morphological mask is then used to quantify gene-product on a per nuclei basis. What results is an atlas of the relative amount of the specific gene product expressed within the nucleus of every cell in the embryo at the various stages of development. We are creating a quantitative database of transcription factor and target gene expression patterns in wild-type and factor mutant embryos with single cell resolution. Our goal is to uncover the rules determining how patterns of gene expression are generated.

  10. 77 FR 43063 - Affirmation of Vertical Datum for Surveying and Mapping Activities for the Territory of Puerto Rico

    Science.gov (United States)

    2012-07-23

    ... Datum for Surveying and Mapping Activities for the Territory of Puerto Rico AGENCY: National Geodetic...-16 ( http://www.whitehouse.gov/omb/circulars/a016/a016.html ), to affirm the Puerto Rico Vertical... the islands of Puerto Rico, Culebra, Mona and Vieques of the Commonwealth of Puerto Rico and to the...

  11. Testing the lognormality of the galaxy and weak lensing convergence distributions from Dark Energy Survey maps

    International Nuclear Information System (INIS)

    Clerkin, L.; Kirk, D.; Manera, M.; Lahav, O.; Abdalla, F.

    2016-01-01

    It is well known that the probability distribution function (PDF) of galaxy density contrast is approximately lognormal; whether the PDF of mass fluctuations derived from weak lensing convergence (κWL) is lognormal is less well established. We derive PDFs of the galaxy and projected matter density distributions via the counts-in-cells (CiC) method. We use maps of galaxies and weak lensing convergence produced from the Dark Energy Survey Science Verification data over 139 deg"2. We test whether the underlying density contrast is well described by a lognormal distribution for the galaxies, the convergence and their joint PDF. We confirm that the galaxy density contrast distribution is well modelled by a lognormal PDF convolved with Poisson noise at angular scales from 10 to 40 arcmin (corresponding to physical scales of 3–10 Mpc). We note that as κWL is a weighted sum of the mass fluctuations along the line of sight, its PDF is expected to be only approximately lognormal. We find that the κWL distribution is well modelled by a lognormal PDF convolved with Gaussian shape noise at scales between 10 and 20 arcmin, with a best-fitting χ"2/dof of 1.11 compared to 1.84 for a Gaussian model, corresponding to p-values 0.35 and 0.07, respectively, at a scale of 10 arcmin. Above 20 arcmin a simple Gaussian model is sufficient. The joint PDF is also reasonably fitted by a bivariate lognormal. As a consistency check, we compare the variances derived from the lognormal modelling with those directly measured via CiC. Lastly, our methods are validated against maps from the MICE Grand Challenge N-body simulation.

  12. Combining Google Earth and GIS mapping technologies in a dengue surveillance system for developing countries

    Directory of Open Access Journals (Sweden)

    Sobieszczyk Magdalena E

    2009-07-01

    Full Text Available Abstract Background Dengue fever is a mosquito-borne illness that places significant burden on tropical developing countries with unplanned urbanization. A surveillance system using Google Earth and GIS mapping technologies was developed in Nicaragua as a management tool. Methods and Results Satellite imagery of the town of Bluefields, Nicaragua captured from Google Earth was used to create a base-map in ArcGIS 9. Indices of larval infestation, locations of tire dumps, cemeteries, large areas of standing water, etc. that may act as larval development sites, and locations of the homes of dengue cases collected during routine epidemiologic surveying were overlaid onto this map. Visual imagery of the location of dengue cases, larval infestation, and locations of potential larval development sites were used by dengue control specialists to prioritize specific neighborhoods for targeted control interventions. Conclusion This dengue surveillance program allows public health workers in resource-limited settings to accurately identify areas with high indices of mosquito infestation and interpret the spatial relationship of these areas with potential larval development sites such as garbage piles and large pools of standing water. As a result, it is possible to prioritize control strategies and to target interventions to highest risk areas in order to eliminate the likely origin of the mosquito vector. This program is well-suited for resource-limited settings since it utilizes readily available technologies that do not rely on Internet access for daily use and can easily be implemented in many developing countries for very little cost.

  13. Development of gamma probe for radiation surveys of the bottoms of surface waters

    International Nuclear Information System (INIS)

    Lee, D.R.; Welch, S.J.; St Aubin, M.J.; Dal Bianco, R.

    1992-01-01

    We have developed a practical method for mapping variations in gamma activity and electrical conductivity of submerged sediments. Prototype probes are being constructed and tested. The first prototype was essentially a background survey meter (Jones, 1979) packaged in a 53-cm-long by 5.4-cm-diameter waterproof vehicle. This tubular vehicle was towed by boat in contact with the bottom sediments of lakes and rivers. Originally, this vehicle was designed (and is still frequently used) for locating groundwater and contaminant entry areas in surface waters. By logging geographic position and sediment variables, it has been possible to produce contour maps in areas of interest. Thus it is possible to optimize environmental analysis and avoid the 'hit or miss' approach of traditional bottom-sediment surveys. (author)

  14. Mapping Impervious Surfaces Globally at 30m Resolution Using Landsat Global Land Survey Data

    Science.gov (United States)

    Brown de Colstoun, E.; Huang, C.; Wolfe, R. E.; Tan, B.; Tilton, J.; Smith, S.; Phillips, J.; Wang, P.; Ling, P.; Zhan, J.; Xu, X.; Taylor, M. P.

    2013-12-01

    Impervious surfaces, mainly artificial structures and roads, cover less than 1% of the world's land surface (1.3% over USA). Regardless of the relatively small coverage, impervious surfaces have a significant impact on the environment. They are the main source of the urban heat island effect, and affect not only the energy balance, but also hydrology and carbon cycling, and both land and aquatic ecosystem services. In the last several decades, the pace of converting natural land surface to impervious surfaces has increased. Quantitatively monitoring the growth of impervious surface expansion and associated urbanization has become a priority topic across both the physical and social sciences. The recent availability of consistent, global scale data sets at 30m resolution such as the Global Land Survey from the Landsat satellites provides an unprecedented opportunity to map global impervious cover and urbanization at this resolution for the first time, with unprecedented detail and accuracy. Moreover, the spatial resolution of Landsat is absolutely essential to accurately resolve urban targets such a buildings, roads and parking lots. With long term GLS data now available for the 1975, 1990, 2000, 2005 and 2010 time periods, the land cover/use changes due to urbanization can now be quantified at this spatial scale as well. In the Global Land Survey - Imperviousness Mapping Project (GLS-IMP), we are producing the first global 30 m spatial resolution impervious cover data set. We have processed the GLS 2010 data set to surface reflectance (8500+ TM and ETM+ scenes) and are using a supervised classification method using a regression tree to produce continental scale impervious cover data sets. A very large set of accurate training samples is the key to the supervised classifications and is being derived through the interpretation of high spatial resolution (~2 m or less) commercial satellite data (Quickbird and Worldview2) available to us through the unclassified

  15. A preliminary global geologic map of Vesta based on Dawn Survey orbit data

    Science.gov (United States)

    Yingst, R.; Williams, D. A.; Garry, W. B.; Mest, S. C.; Petro, N. E.; Buczkowski, D.; Schenk, P.; Jaumann, R.; Pieters, C. M.; Roatsch, T.; Preusker, F.; Nathues, A.; LeCorre, L.; Reddy, V.; Russell, C. T.; Raymond, C. A.; DeSanctis, C.; Ammannito, E.; Filacchione, G.

    2011-12-01

    NASA's Dawn spacecraft arrived at the asteroid 4Vesta on July 15, 2011, and is now collecting imaging, spectroscopic, and elemental abundance data during its one-year orbital mission. As part of the geological analysis of the surface, we have utilized images and data from the Survey orbital sequence to produce a global map of Vesta's surface. Unit boundaries and feature characteristics were determined primarily from morphologic analysis of image data; projected Framing Camera (FC) images were used as the base map. Spectral information from FC and VIR are used to refine unit contacts and to separate compositional distinctions from differences arising from illumination or other factors. Those units that could be discerned both in morphology and in the color data were interpreted as geologically distinct units. Vesta's surface is highly-cratered; differences in color and albedo are possible indicators of varying thicknesses and areal extents of crater ejecta. The most prominent candidate impact feature dominates the south pole. This feature consists of a depression roughly circular in shape, with a central hill that is characterized by smoother texture and lower albedo distinctive from the lower-lying surrounding terrain. A complex network of deep troughs and ridges cuts through the floor of the feature. Many of these troughs trend north-south, while others appear circumferential to the hill and are truncated by or terminate at orthogonal ridges/grooves. Detailed mapping of these features will provide information on their orientations, possible origin(s), and their relationship, if any, to the central hill. The equator of Vesta is also girdled by a wide set of flat-floored troughs. Their orientation implies that their formation is related to the south polar structure. Several regions on Vesta have a concentration of craters displaying low-albedo interiors or exteriors. These craters may have an exogenic origin, or may be the result of excavation of a thin sub

  16. THE SLOAN DIGITAL SKY SURVEY REVERBERATION MAPPING PROJECT: RAPID C iv BROAD ABSORPTION LINE VARIABILITY

    Energy Technology Data Exchange (ETDEWEB)

    Grier, C. J.; Brandt, W. N.; Trump, J. R.; Schneider, D. P. [Department of Astronomy and Astrophysics and Institute for Gravitation and the Cosmos, The Pennsylvania State University, 525 Davey Laboratory, University Park, PA 16802 (United States); Hall, P. B. [Department of Physics and Astronomy, York University, Toronto, ON M3J 1P3 (Canada); Shen, Yue [Carnegie Observatories, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Vivek, M.; Dawson, K. S. [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States); Ak, N. Filiz [Faculty of Sciences, Department of Astronomy and Space Sciences, Erciyes University, 38039 Kayseri (Turkey); Chen, Yuguang [Department of Astronomy, School of Physics, Peking University, Beijing 100871 (China); Denney, K. D.; Kochanek, C. S.; Peterson, B. M. [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Green, Paul J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Jiang, Linhua [Kavli Institute for Astronomy and Astrophysics, Peking University, Beijing 100871 (China); McGreer, Ian D. [Steward Observatory, The University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721-0065 (United States); Pâris, I. [INAF-Osservatorio Astronomico di Trieste, Via G. B. Tiepolo 11, I-34131 Trieste (Italy); Tao, Charling [Centre de Physique des Particules de Marseille, Aix-Marseille Universite, CNRS /IN2P3, 163, avenue de Luminy, Case 902, F-13288 Marseille Cedex 09 (France); Wood-Vasey, W. M. [PITT PACC, Department of Physics and Astronomy, University of Pittsburgh, 3941 O’Hara Street, Pittsburgh, PA 15260 (United States); Bizyaev, Dmitry, E-mail: grier@psu.edu [Apache Point Observatory and New Mexico State University, P.O. Box 59, Sunspot, NM, 88349-0059 (United States); and others

    2015-06-10

    We report the discovery of rapid variations of a high-velocity C iv broad absorption line trough in the quasar SDSS J141007.74+541203.3. This object was intensively observed in 2014 as a part of the Sloan Digital Sky Survey Reverberation Mapping Project, during which 32 epochs of spectroscopy were obtained with the Baryon Oscillation Spectroscopic Survey spectrograph. We observe significant (>4σ) variability in the equivalent width (EW) of the broad (∼4000 km s{sup −1} wide) C iv trough on rest-frame timescales as short as 1.20 days (∼29 hr), the shortest broad absorption line variability timescale yet reported. The EW varied by ∼10% on these short timescales, and by about a factor of two over the duration of the campaign. We evaluate several potential causes of the variability, concluding that the most likely cause is a rapid response to changes in the incident ionizing continuum. If the outflow is at a radius where the recombination rate is higher than the ionization rate, the timescale of variability places a lower limit on the density of the absorbing gas of n{sub e} ≳ 3.9 × 10{sup 5} cm{sup −3}. The broad absorption line variability characteristics of this quasar are consistent with those observed in previous studies of quasars, indicating that such short-term variability may in fact be common and thus can be used to learn about outflow characteristics and contributions to quasar/host-galaxy feedback scenarios.

  17. Developing index maps of water-harvest potential in Africa

    Science.gov (United States)

    Senay, G.B.; Verdin, J.P.

    2004-01-01

    The food security problem in Africa is tied to the small farmer, whose subsistence farming relies heavily on rain-fed agriculture. A dry spell lasting two to three weeks can cause a significant yield reduction. A small-scale irrigation scheme from small-capacity ponds can alleviate this problem. This solution would require a water harvest mechanism at a farm level. In this study, we looked at the feasibility of implementing such a water harvest mechanism in drought prone parts of Africa. A water balance study was conducted at different watershed levels. Runoff (watershed yield) was estimated using the SCS curve number technique and satellite derived rainfall estimates (RFE). Watersheds were delineated from the Africa-wide HYDRO-1K digital elevation model (DEM) data set in a GIS environment. Annual runoff volumes that can potentially be stored in a pond during storm events were estimated as the product of the watershed area and runoff excess estimated from the SCS Curve Number method. Estimates were made for seepage and net evaporation losses. A series of water harvest index maps were developed based on a combination of factors that took into account the availability of runoff, evaporation losses, population density, and the required watershed size needed to fill a small storage reservoir that can be used to alleviate water stress during a crop growing season. This study presents Africa-wide water-harvest index maps that could be used for conducting feasibility studies at a regional scale in assessing the relative differences in runoff potential between regions for the possibility of using ponds as a water management tool. ?? 2004 American Society of Agricultural Engineers.

  18. Food aid to developing countries: a survey

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S J; Singer, H W

    1979-03-01

    Food air currently constitutes nearly 15% of official development assistance and hence has considerable potential as a stimulant to growth in less-developed countries (LDCs). This paper reviews the evidence on the impact of food aid on growth and its associated factors. While recognizing that the use of food aid is influenced by a constellation of interests in recipient and donor countries, it identifies a set of guiding principles for maximizing the effectiveness of food aid. These include the need for food (relative to other development needs), its level of substitutability with commercial imports, its incorporation in a poverty-oriented development plan, its guaranteed availability and its complementarity with financial aid. Current food air programs recognize the relevance of some of these principles - e.g. the criteria of necessity - but ignore others - notably the need to situate food aid in a comprehensive plan for improving patterns of income distribution in LDCs. 203 notes, 203 references.

  19. Automatically Generated Vegetation Density Maps with LiDAR Survey for Orienteering Purpose

    Science.gov (United States)

    Petrovič, Dušan

    2018-05-01

    The focus of our research was to automatically generate the most adequate vegetation density maps for orienteering purpose. Application Karttapullatuin was used for automated generation of vegetation density maps, which requires LiDAR data to process an automatically generated map. A part of the orienteering map in the area of Kazlje-Tomaj was used to compare the graphical display of vegetation density. With different settings of parameters in the Karttapullautin application we changed the way how vegetation density of automatically generated map was presented, and tried to match it as much as possible with the orienteering map of Kazlje-Tomaj. Comparing more created maps of vegetation density the most suitable parameter settings to automatically generate maps on other areas were proposed, too.

  20. Recent developments in airborne gamma ray surveying

    International Nuclear Information System (INIS)

    Grasty, Robert L.

    1999-01-01

    Standardized procedures have been developed for converting airborne gamma ray measurements to ground concentrations of potassium, uranium and thorium. These procedures make use of an airborne calibration range whose ground concentrations should be measured with a calibrated portable spectrometer rather than by taking geochemical samples. Airborne sensitivities and height attenuation coefficients are normally determined from flights over the calibration range but may not be applicable in mountainous areas. Mathematical techniques have been now developed to reduce statistical noise in the airborne measurements by utilizing up to 256 channels of spectral information. (author)

  1. A fast and cost-effective approach to develop and map EST-SSR markers: oak as a case study

    Directory of Open Access Journals (Sweden)

    Cherubini Marcello

    2010-10-01

    Full Text Available Abstract Background Expressed Sequence Tags (ESTs are a source of simple sequence repeats (SSRs that can be used to develop molecular markers for genetic studies. The availability of ESTs for Quercus robur and Quercus petraea provided a unique opportunity to develop microsatellite markers to accelerate research aimed at studying adaptation of these long-lived species to their environment. As a first step toward the construction of a SSR-based linkage map of oak for quantitative trait locus (QTL mapping, we describe the mining and survey of EST-SSRs as well as a fast and cost-effective approach (bin mapping to assign these markers to an approximate map position. We also compared the level of polymorphism between genomic and EST-derived SSRs and address the transferability of EST-SSRs in Castanea sativa (chestnut. Results A catalogue of 103,000 Sanger ESTs was assembled into 28,024 unigenes from which 18.6% presented one or more SSR motifs. More than 42% of these SSRs corresponded to trinucleotides. Primer pairs were designed for 748 putative unigenes. Overall 37.7% (283 were found to amplify a single polymorphic locus in a reference full-sib pedigree of Quercus robur. The usefulness of these loci for establishing a genetic map was assessed using a bin mapping approach. Bin maps were constructed for the male and female parental tree for which framework linkage maps based on AFLP markers were available. The bin set consisting of 14 highly informative offspring selected based on the number and position of crossover sites. The female and male maps comprised 44 and 37 bins, with an average bin length of 16.5 cM and 20.99 cM, respectively. A total of 256 EST-SSRs were assigned to bins and their map position was further validated by linkage mapping. EST-SSRs were found to be less polymorphic than genomic SSRs, but their transferability rate to chestnut, a phylogenetically related species to oak, was higher. Conclusion We have generated a bin map for oak

  2. Alternative methods for developing external travel survey data.

    Science.gov (United States)

    2010-10-01

    The Texas Department of Transportation (TxDOT) has a comprehensive on-going travel survey : program that supports the travel demand models being developed for transportation planning efforts in urban : areas throughout Texas. One component of the sur...

  3. Development of GPS survey data management protocols/policy.

    Science.gov (United States)

    2010-08-01

    This project developed a statewide policy and criteria for collecting, analyzing, and managing global position system (GPS) survey data. The research project determined the needs of the Department in adopting the GPS real time kinetic (GPS RTK) stake...

  4. A survey of simultaneous localization and mapping on unstructured lunar complex environment

    Science.gov (United States)

    Wang, Yiqiao; Zhang, Wei; An, Pei

    2017-10-01

    Simultaneous localization and mapping (SLAM) technology is the key to realizing lunar rover's intelligent perception and autonomous navigation. It embodies the autonomous ability of mobile robot, and has attracted plenty of concerns of researchers in the past thirty years. Visual sensors are meaningful to SLAM research because they can provide a wealth of information. Visual SLAM uses merely images as external information to estimate the location of the robot and construct the environment map. Nowadays, SLAM technology still has problems when applied in large-scale, unstructured and complex environment. Based on the latest technology in the field of visual SLAM, this paper investigates and summarizes the SLAM technology using in the unstructured complex environment of lunar surface. In particular, we focus on summarizing and comparing the detection and matching of features of SIFT, SURF and ORB, in the meanwhile discussing their advantages and disadvantages. We have analyzed the three main methods: SLAM Based on Extended Kalman Filter, SLAM Based on Particle Filter and SLAM Based on Graph Optimization (EKF-SLAM, PF-SLAM and Graph-based SLAM). Finally, this article summarizes and discusses the key scientific and technical difficulties in the lunar context that Visual SLAM faces. At the same time, we have explored the frontier issues such as multi-sensor fusion SLAM and multi-robot cooperative SLAM technology. We also predict and prospect the development trend of lunar rover SLAM technology, and put forward some ideas of further research.

  5. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  6. Using GPS-surveyed intertidal zones to determine the validity of shorelines automatically mapped by Landsat water indices

    Science.gov (United States)

    Kelly, Joshua T.; Gontz, Allen M.

    2018-03-01

    Satellite remote sensing has been used extensively in a variety of shoreline studies and validated using aerial photography. This ground truth method only represents an instantaneous depiction of the shoreline at the time of acquisition and does not take into account the spatial and temporal variability of the dynamic shoreline boundary. Landsat 8‧s Operational Land Imager sensor's capability to accurately delineate a shoreline is assessed by comparing all known Landsat water index-derived shorelines with two GPS-surveyed intertidal zones that coincide with the satellite flyover date, one of which had near-neap tide conditions. Seven indices developed for automatically classifying water pixels were evaluated for their ability to delineate shorelines. The shoreline is described here as the area above and below maximum low and high tide, otherwise known as the intertidal zone. The high-water line, or wet/dry sediment line, was chosen as the shoreline indicator to be mapped using a handheld GPS. The proportion of the Landsat-derived shorelines that fell within this zone and their alongshore profile lengths were calculated. The most frequently used water index and the predecessor to Modified Normalized Difference Water Index (MNDWI), Normalized Difference Water Index (NDWI), was found to be the least accurate by a significant margin. Other indices required calibration of their threshold value to achieve accurate results, thus diminishing their replicability success for other regions. MNDWI was determined to be the best index for automated shoreline mapping, based on its superior accuracy and repeatable, stable threshold value.

  7. Mapping brain development during childhood, adolescence and young adulthood

    Science.gov (United States)

    Guo, Xiaojuan; Jin, Zhen; Chen, Kewei; Peng, Danling; Li, Yao

    2009-02-01

    Using optimized voxel-based morphometry (VBM), this study systematically investigated the differences and similarities of brain structural changes during the early three developmental periods of human lives: childhood, adolescence and young adulthood. These brain changes were discussed in relationship to the corresponding cognitive function development during these three periods. Magnetic Resonance Imaging (MRI) data from 158 Chinese healthy children, adolescents and young adults, aged 7.26 to 22.80 years old, were included in this study. Using the customized brain template together with the gray matter/white matter/cerebrospinal fluid prior probability maps, we found that there were more age-related positive changes in the frontal lobe, less in hippocampus and amygdala during childhood, but more in bilateral hippocampus and amygdala and left fusiform gyrus during adolescence and young adulthood. There were more age-related negative changes near to central sulcus during childhood, but these changes extended to the frontal and parietal lobes, mainly in the parietal lobe, during adolescence and young adulthood, and more in the prefrontal lobe during young adulthood. So gray matter volume in the parietal lobe significantly decreased from childhood and continued to decrease till young adulthood. These findings may aid in understanding the age-related differences in cognitive function.

  8. Energy and society: a conceptual mapping. A preliminary literature survey. [142 references cited

    Energy Technology Data Exchange (ETDEWEB)

    Clark, R.W.

    1976-01-01

    This literature survey relates energy to four broad categories of social research: Part One--The Diffusion of Innovations; Part Two--Community Studies; Part III--Culture Contact Studies; and Part IV--Energy and Society. The purpose of the report is twofold: to provide a nonexhaustive literature overview for each of these four categories of social science research; and to suggest how such research contributes to the study of energy-society interactions and how future research might be directed toward improving this developing body of knowledge. 143 references.

  9. Development of a web based GIS for health facilities mapping ...

    African Journals Online (AJOL)

    Hilary Mushonga

    Key Words: Spatial Decision Support System, Web GIS, Mapping, Health geography. 1. Introduction ... Health geography is an area of medical research that incorporates geographic techniques into the study of ... street water pump. Once the ...

  10. [Risk maps. The concept and the methodology for their development].

    Science.gov (United States)

    García Gómez, M M

    1994-01-01

    In this article the concept of risk map is revised. It is considered as an instrument for the knowledge of risks and damages in a certain environment. A historic revision is made analyzing the birth and evolution of the concept. Different experiences and types of maps in different countries are described. Finally the operative steps, the data sources and the risk indicators which should be used in Spain are included.

  11. NEW DEVELOPMENTS ON INVERSE POLYGON MAPPING TO CALCULATE GRAVITATIONAL LENSING MAGNIFICATION MAPS: OPTIMIZED COMPUTATIONS

    International Nuclear Information System (INIS)

    Mediavilla, E.; Lopez, P.; Mediavilla, T.; Ariza, O.; Muñoz, J. A.; Gonzalez-Morcillo, C.; Jimenez-Vicente, J.

    2011-01-01

    We derive an exact solution (in the form of a series expansion) to compute gravitational lensing magnification maps. It is based on the backward gravitational lens mapping of a partition of the image plane in polygonal cells (inverse polygon mapping, IPM), not including critical points (except perhaps at the cell boundaries). The zeroth-order term of the series expansion leads to the method described by Mediavilla et al. The first-order term is used to study the error induced by the truncation of the series at zeroth order, explaining the high accuracy of the IPM even at this low order of approximation. Interpreting the Inverse Ray Shooting (IRS) method in terms of IPM, we explain the previously reported N –3/4 dependence of the IRS error with the number of collected rays per pixel. Cells intersected by critical curves (critical cells) transform to non-simply connected regions with topological pathologies like auto-overlapping or non-preservation of the boundary under the transformation. To define a non-critical partition, we use a linear approximation of the critical curve to divide each critical cell into two non-critical subcells. The optimal choice of the cell size depends basically on the curvature of the critical curves. For typical applications in which the pixel of the magnification map is a small fraction of the Einstein radius, a one-to-one relationship between the cell and pixel sizes in the absence of lensing guarantees both the consistence of the method and a very high accuracy. This prescription is simple but very conservative. We show that substantially larger cells can be used to obtain magnification maps with huge savings in computation time.

  12. Development and validation of Neonatal Satisfaction Survey--NSS-13.

    Science.gov (United States)

    Hagen, Inger H; Vadset, Tove B; Barstad, Johan; Svindseth, Marit F

    2015-06-01

    The purpose of this study was to develop and validate a survey to investigate parents' satisfaction with neonatal wards in a population of parents of children with a gestation age of ≥24 weeks to 3 months after full-term birth. We explored the literature and conducted three focus groups: two with expert health personnel and one with parents. We tested the survey in a parent population (N = 105) and report the different stages in the validation process along with the full survey, the Neonatal Satisfaction Survey - 13 categories (NSS-13). We found 13 subcategories in the Neonatal Satisfaction Survey. The subcategories measure parents' satisfaction with neonatal units based on staff, admission, nurses, anxiety, siblings (parents' perceptions of caring for the siblings of the newborn), information, timeout, doctors, facilities, nutrition, preparation for discharge, trust and visitors. Each subcategory showed acceptable internal consistency. The full version of the Neonatal Satisfaction Survey presents 69 items, and each subcategory contains two to eleven items. The Neonatal Satisfaction Survey seems suitable to measure parents' satisfaction with neonatal units and can be used in full, but it can also measure subcategories. Parents' satisfaction with neonatal units can be used to improve the quality in such wards. We consider this study as the first in a series to validate the NSS-13. The full survey with subcategories is presented in this paper. © 2014 Nordic College of Caring Science.

  13. The Open Cluster Chemical Abundances and Mapping (OCCAM) Survey: Detailed Age and Abundance Gradients using DR12

    Science.gov (United States)

    Frinchaboy, Peter M.; Thompson, Benjamin A.; O'Connell, Julia; Meyer, Brianne; Donor, John; Majewski, Steven R.; Holtzman, Jon A.; Zasowski, Gail; Beers, Timothy C.; Beaton, Rachael; Cunha, Katia M. L.; Hearty, Fred; Nidever, David L.; Schiavon, Ricardo P.; Smith, Verne V.; Hayden, Michael R.

    2015-01-01

    We present detailed abundance results for Galactic open clusters as part of the Open Cluster Chemical Abundances and Mapping (OCCAM) Survey, which is based primarily on data from the Sloan Digital Sky Survey/ Apache Point Observatory Galactic Evolution Experiment. Using 100 open clusters from the uniformly observed complete SDSS-III/APOGEE-1 DR12 dataset, we present age and multi-element abundance gradients for the disk of the Milky Way.This work is supported by an NSF AAG grant AST-1311835.

  14. Development and validation of the primary care team dynamics survey.

    Science.gov (United States)

    Song, Hummy; Chien, Alyna T; Fisher, Josephine; Martin, Julia; Peters, Antoinette S; Hacker, Karen; Rosenthal, Meredith B; Singer, Sara J

    2015-06-01

    To develop and validate a survey instrument designed to measure team dynamics in primary care. We studied 1,080 physician and nonphysician health care professionals working at 18 primary care practices participating in a learning collaborative aimed at improving team-based care. We developed a conceptual model and administered a cross-sectional survey addressing team dynamics, and we assessed reliability and discriminant validity of survey factors and the overall survey's goodness-of-fit using structural equation modeling. We administered the survey between September 2012 and March 2013. Overall response rate was 68 percent (732 respondents). Results support a seven-factor model of team dynamics, suggesting that conditions for team effectiveness, shared understanding, and three supportive processes are associated with acting and feeling like a team and, in turn, perceived team effectiveness. This model demonstrated adequate fit (goodness-of-fit index: 0.91), scale reliability (Cronbach's alphas: 0.71-0.91), and discriminant validity (average factor correlations: 0.49). It is possible to measure primary care team dynamics reliably using a 29-item survey. This survey may be used in ambulatory settings to study teamwork and explore the effect of efforts to improve team-based care. Future studies should demonstrate the importance of team dynamics for markers of team effectiveness (e.g., work satisfaction, care quality, clinical outcomes). © Health Research and Educational Trust.

  15. A new all-sky map of Galactic high-velocity clouds from the 21-cm HI4PI survey

    Science.gov (United States)

    Westmeier, Tobias

    2018-02-01

    High-velocity clouds (HVCs) are neutral or ionized gas clouds in the vicinity of the Milky Way that are characterized by high radial velocities inconsistent with participation in the regular rotation of the Galactic disc. Previous attempts to create a homogeneous all-sky H I map of HVCs have been hampered by a combination of poor angular resolution, limited surface brightness sensitivity and suboptimal sampling. Here, a new and improved H I map of Galactic HVCs based on the all-sky HI4PI survey is presented. The new map is fully sampled and provides significantly better angular resolution (16.2 versus 36 arcmin) and column density sensitivity (2.3 versus 3.7 × 1018 cm-2 at the native resolution) than the previously available LAB survey. The new HVC map resolves many of the major HVC complexes in the sky into an intricate network of narrow H I filaments and clumps that were not previously resolved by the LAB survey. The resulting sky coverage fraction of high-velocity H I emission above a column density level of 2 × 1018 cm-2 is approximately 15 per cent, which reduces to about 13 per cent when the Magellanic Clouds and other non-HVC emission are removed. The differential sky coverage fraction as a function of column density obeys a truncated power law with an exponent of -0.93 and a turnover point at about 5 × 1019 cm-2. H I column density and velocity maps of the HVC sky are made publicly available as FITS images for scientific use by the community.

  16. Dark Energy Survey Year 1 results: curved-sky weak lensing mass map

    Science.gov (United States)

    Chang, C.; Pujol, A.; Mawdsley, B.; Bacon, D.; Elvin-Poole, J.; Melchior, P.; Kovács, A.; Jain, B.; Leistedt, B.; Giannantonio, T.; Alarcon, A.; Baxter, E.; Bechtol, K.; Becker, M. R.; Benoit-Lévy, A.; Bernstein, G. M.; Bonnett, C.; Busha, M. T.; Rosell, A. Carnero; Castander, F. J.; Cawthon, R.; da Costa, L. N.; Davis, C.; De Vicente, J.; DeRose, J.; Drlica-Wagner, A.; Fosalba, P.; Gatti, M.; Gaztanaga, E.; Gruen, D.; Gschwend, J.; Hartley, W. G.; Hoyle, B.; Huff, E. M.; Jarvis, M.; Jeffrey, N.; Kacprzak, T.; Lin, H.; MacCrann, N.; Maia, M. A. G.; Ogando, R. L. C.; Prat, J.; Rau, M. M.; Rollins, R. P.; Roodman, A.; Rozo, E.; Rykoff, E. S.; Samuroff, S.; Sánchez, C.; Sevilla-Noarbe, I.; Sheldon, E.; Troxel, M. A.; Varga, T. N.; Vielzeuf, P.; Vikram, V.; Wechsler, R. H.; Zuntz, J.; Abbott, T. M. C.; Abdalla, F. B.; Allam, S.; Annis, J.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Kind, M. Carrasco; Carretero, J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; Desai, S.; Diehl, H. T.; Dietrich, J. P.; Doel, P.; Estrada, J.; Neto, A. Fausti; Fernandez, E.; Flaugher, B.; Frieman, J.; García-Bellido, J.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; James, D. J.; Jeltema, T.; Johnson, M. W. G.; Johnson, M. D.; Kent, S.; Kirk, D.; Krause, E.; Kuehn, K.; Kuhlmann, S.; Lahav, O.; Li, T. S.; Lima, M.; March, M.; Martini, P.; Menanteau, F.; Miquel, R.; Mohr, J. J.; Neilsen, E.; Nichol, R. C.; Petravick, D.; Plazas, A. A.; Romer, A. K.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Smith, M.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Tarle, G.; Thomas, D.; Tucker, D. L.; Walker, A. R.; Wester, W.; Zhang, Y.

    2018-04-01

    We construct the largest curved-sky galaxy weak lensing mass map to date from the DES first-year (DES Y1) data. The map, about 10 times larger than the previous work, is constructed over a contiguous ≈1500 deg2, covering a comoving volume of ≈10 Gpc3. The effects of masking, sampling, and noise are tested using simulations. We generate weak lensing maps from two DES Y1 shear catalogues, METACALIBRATION and IM3SHAPE, with sources at redshift 0.2 < z < 1.3, and in each of four bins in this range. In the highest signal-to-noise map, the ratio between the mean signal to noise in the E-mode map and the B-mode map is ˜1.5 (˜2) when smoothed with a Gaussian filter of σG = 30 (80) arcmin. The second and third moments of the convergence κ in the maps are in agreement with simulations. We also find no significant correlation of κ with maps of potential systematic contaminants. Finally, we demonstrate two applications of the mass maps: (1) cross-correlation

  17. Dark Energy Survey Year 1 Results: Curved-Sky Weak Lensing Mass Map

    Energy Technology Data Exchange (ETDEWEB)

    Chang, C.; et al.

    2017-08-04

    We construct the largest curved-sky galaxy weak lensing mass map to date from the DES first-year (DES Y1) data. The map, about 10 times larger than previous work, is constructed over a contiguous $\\approx1,500 $deg$^2$, covering a comoving volume of $\\approx10 $Gpc$^3$. The effects of masking, sampling, and noise are tested using simulations. We generate weak lensing maps from two DES Y1 shear catalogs, Metacalibration and Im3shape, with sources at redshift $0.2map, the ratio between the mean signal-to-noise in the E-mode and the B-mode map is $\\sim$1.5 ($\\sim$2) when smoothed with a Gaussian filter of $\\sigma_{G}=30$ (80) arcminutes. The second and third moments of the convergence $\\kappa$ in the maps are in agreement with simulations. We also find no significant correlation of $\\kappa$ with maps of potential systematic contaminants. Finally, we demonstrate two applications of the mass maps: (1) cross-correlation with different foreground tracers of mass and (2) exploration of the largest peaks and voids in the maps.

  18. [The primary research and development of software oversampling mapping system for electrocardiogram].

    Science.gov (United States)

    Zhou, Yu; Ren, Jie

    2011-04-01

    We put forward a new concept of software oversampling mapping system for electrocardiogram (ECG) to assist the research of the ECG inverse problem to improve the generality of mapping system and the quality of mapping signals. We then developed a conceptual system based on the traditional ECG detecting circuit, Labview and DAQ card produced by National Instruments, and at the same time combined the newly-developed oversampling method into the system. The results indicated that the system could map ECG signals accurately and the quality of the signals was good. The improvement of hardware and enhancement of software made the system suitable for mapping in different situations. So the primary development of the software for oversampling mapping system was successful and further research and development can make the system a powerful tool for researching ECG inverse problem.

  19. Survey, design, development, and installation of micro hydel power generation

    International Nuclear Information System (INIS)

    Ijaz, M.

    2011-01-01

    This paper presents the survey, design, development and installation Of micro hydel power generation using low head Kaplan water turbine. Electricity production from hydro power has been and still is today, the first renewable source used to generate electricity. The development of energy from renewable is very important step in reduction of carbon emissions(CO/sub 2/).

  20. Large Scale Survey Data in Career Development Research

    Science.gov (United States)

    Diemer, Matthew A.

    2008-01-01

    Large scale survey datasets have been underutilized but offer numerous advantages for career development scholars, as they contain numerous career development constructs with large and diverse samples that are followed longitudinally. Constructs such as work salience, vocational expectations, educational expectations, work satisfaction, and…

  1. SAR China Land Mapping Project: Development, Production and Potential Applications

    International Nuclear Information System (INIS)

    Zhang, Lu; Guo, Huadong; Liu, Guang; Fu, Wenxue; Yan, Shiyong; Song, Rui; Ji, Peng; Wang, Xinyuan

    2014-01-01

    Large-area, seamless synthetic aperture radar (SAR) mosaics can reflect overall environmental conditions and highlight general trends in observed areas from a macroscopic standpoint, and effectively support research at the global scale, which is in high demand now across scientific fields. The SAR China Land Mapping Project (SCLM), supported by the Digital Earth Science Platform Project initiated and managed by the Center for Earth Observation and Digital Earth, Chinese Academy of Sciences (CEODE), is introduced in this paper. This project produced a large-area SAR mosaic dataset and generated the first complete seamless SAR map covering the entire land area of China using EnviSat-ASAR images. The value of the mosaic map is demonstrated by some potential applications in studies of urban distribution, rivers and lakes, geologic structures, geomorphology and paleoenvironmental change

  2. The development and mapping of functional markers in Fragaria and their transferability and potential for mapping in other genera.

    Science.gov (United States)

    Sargent, D J; Rys, A; Nier, S; Simpson, D W; Tobutt, K R

    2007-01-01

    We have developed 46 primer pairs from exon sequences flanking polymorphic introns of 23 Fragaria gene sequences and one Malus sequence deposited in the EMBL database. Sequencing of a set of the PCR products amplified with the novel primer pairs in diploid Fragaria showed the products to be homologous to the sequences from which the primers were originally designed. By scoring the segregation of the 24 genes in two diploid Fragaria progenies FV x FN (F. vesca x F. nubicola F(2)) and 815 x 903BC (F. vesca x F. viridis BC(1)) 29 genetic loci at discrete positions on the seven linkage groups previously characterised could be mapped, bringing to 35 the total number of known function genes mapped in Fragaria. Twenty primer pairs, representing 14 genes, amplified a product of the expected size in both Malus and Prunus. To demonstrate the applicability of these gene-specific loci to comparative mapping in Rosaceae, five markers that displayed clear polymorphism between the parents of a Malus and a Prunus mapping population were selected. The markers were then scored and mapped in at least one of the two additional progenies.

  3. Minerals, lands, and geology for the common defence and general welfare, Volume 4, 1939-1961: A history of geology in relation to the development of public-land, federal science, and mapping policies and the development of mineral resources in the United States from the 60th to the 82d year of the U.S. Geological Survey

    Science.gov (United States)

    Rabbitt, Mary C.; Nelson, Clifford M.

    2015-01-01

    The fourth volume of the comprehensive history of the U.S. Geological Survey (USGS) is titled “Minerals, Lands, and Geology for the Common Defence and General Welfare—Volume 4, 1939‒1961.” The title is based on a passage in the preamble of the U.S. Constitution.

  4. Geographic information technology monitoring and mapping of coal fires in Ukraine, according to the space survey

    Energy Technology Data Exchange (ETDEWEB)

    Pivnyak, G.; Busygin, B.; Garkusha, I. [National Mining Univ., Dnipropetrovsk (Ukraine)

    2010-07-01

    Coal fires are a significant problem around the world, particularly in China, India, and the United States. Coal fires burn thousands of tons of coal reserves and lead to serious problems for the environment, degradation and destruction of landscape, and harm public health. Technology, such as spectrology analysis of signatures with high temperature activity can be used to calculate vegetation algorithms and soil indexes, and multispectral survey data in the thermal channels of scanners. This paper presented the perspectives of technology development in coal fires and the approach to the detection, monitoring, and quantitative estimation of coal fires by the instruments using geographic information systems. Specifically, the paper considered the use of coal fire fragment monitoring technology from data of a diachronous survey obtained by Landsat satellites, to classify dangerous coal waste banks of the Donbass Mine located in Ukraine. The paper provided a description of the study area and discussed the detection technology of temperature-active waste banks. It was concluded that geoinformation technology provides an opportunity to effectively mark mining dumps, in particular, waste banks in multispectrum space images made by Landsat satellites. 7 refs., 6 figs.

  5. Develop advanced nonlinear signal analysis topographical mapping system

    Science.gov (United States)

    1994-01-01

    The Space Shuttle Main Engine (SSME) has been undergoing extensive flight certification and developmental testing, which involves some 250 health monitoring measurements. Under the severe temperature, pressure, and dynamic environments sustained during operation, numerous major component failures have occurred, resulting in extensive engine hardware damage and scheduling losses. To enhance SSME safety and reliability, detailed analysis and evaluation of the measurements signal are mandatory to assess its dynamic characteristics and operational condition. Efficient and reliable signal detection techniques will reduce catastrophic system failure risks and expedite the evaluation of both flight and ground test data, and thereby reduce launch turn-around time. The basic objective of this contract are threefold: (1) develop and validate a hierarchy of innovative signal analysis techniques for nonlinear and nonstationary time-frequency analysis. Performance evaluation will be carried out through detailed analysis of extensive SSME static firing and flight data. These techniques will be incorporated into a fully automated system; (2) develop an advanced nonlinear signal analysis topographical mapping system (ATMS) to generate a Compressed SSME TOPO Data Base (CSTDB). This ATMS system will convert tremendous amount of complex vibration signals from the entire SSME test history into a bank of succinct image-like patterns while retaining all respective phase information. High compression ratio can be achieved to allow minimal storage requirement, while providing fast signature retrieval, pattern comparison, and identification capabilities; and (3) integrate the nonlinear correlation techniques into the CSTDB data base with compatible TOPO input data format. Such integrated ATMS system will provide the large test archives necessary for quick signature comparison. This study will provide timely assessment of SSME component operational status, identify probable causes of

  6. A critique of current developments in simultaneous localization and mapping

    Directory of Open Access Journals (Sweden)

    Shoudong Huang

    2016-10-01

    Full Text Available The number of research publications dealing with the simultaneous localization and mapping problem has grown significantly over the past 15 years. Many fundamental and practical aspects of simultaneous localization and mapping have been addressed, and some efficient algorithms and practical solutions have been demonstrated. The aim of this paper is to provide a critical review of current theoretical understanding of the fundamental properties of the SLAM problem, such as observability, convergence, achievable accuracy and consistency. Recent research outcomes associated with these topics are briefly discussed together with potential future research directions.

  7. Digital Mapping of Soil Drainage Classes Using Multitemporal RADARSAT-1 and ASTER Images and Soil Survey Data

    Directory of Open Access Journals (Sweden)

    Mohamed Abou Niang

    2012-01-01

    Full Text Available Discriminant analysis classification (DAC and decision tree classifiers (DTC were used for digital mapping of soil drainage in the Bras-d’Henri watershed (QC, Canada using earth observation data (RADARSAT-1 and ASTER and soil survey dataset. Firstly, a forward stepwise selection was applied to each land use type identified by ASTER image in order to derive an optimal subset of soil drainage class predictors. The classification models were then applied to these subsets for each land use and merged to obtain a digital soil drainage map for the whole watershed. The DTC method provided better classification accuracies (29 to 92% than the DAC method (33 to 79% according to the land use type. A similarity measure (S was used to compare the best digital soil drainage map (DTC to the conventional soil drainage map. Medium to high similarities (0.6≤S<0.9 were observed for 83% (187 km2 of the study area while 3% of the study area showed very good agreement (S≥0.9. Few soil polygons showed very weak similarities (S<0.3. This study demonstrates the efficiency of combining radar and optical remote sensing data with a representative soil dataset for producing digital maps of soil drainage.

  8. Earthquake Scenarios Based Upon the Data and Methodologies of the U.S. Geological Survey's National Seismic Hazard Mapping Project

    Science.gov (United States)

    Rukstales, K. S.; Petersen, M. D.; Frankel, A. D.; Harmsen, S. C.; Wald, D. J.; Quitoriano, V. R.; Haller, K. M.

    2011-12-01

    The U.S. Geological Survey's (USGS) National Seismic Hazard Mapping Project (NSHMP) utilizes a database of over 500 faults across the conterminous United States to constrain earthquake source models for probabilistic seismic hazard maps. Additionally, the fault database is now being used to produce a suite of deterministic ground motions for earthquake scenarios that are based on the same fault source parameters and empirical ground motion prediction equations used for the probabilistic hazard maps. Unlike the calculated hazard map ground motions, local soil amplification is applied to the scenario calculations based on the best available Vs30 (average shear-wave velocity down to 30 meters) mapping, or in some cases using topographic slope as a proxy. Systematic outputs include all standard USGS ShakeMap products, including GIS, KML, XML, and HAZUS input files. These data are available from the ShakeMap web pages with a searchable archive. The scenarios are being produced within the framework of a geographic information system (GIS) so that alternative scenarios can readily be produced by altering fault source parameters, Vs30 soil amplification, as well as the weighting of ground motion prediction equations used in the calculations. The alternative scenarios can then be used for sensitivity analysis studies to better characterize uncertainty in the source model and convey this information to decision makers. By providing a comprehensive collection of earthquake scenarios based upon the established data and methods of the USGS NSHMP, we hope to provide a well-documented source of data which can be used for visualization, planning, mitigation, loss estimation, and research purposes.

  9. Solar Wind Charge Exchange Contribution To The ROSAT Sky Survey Maps

    Science.gov (United States)

    Uprety, Y.; Chiao, M.; Collier, M. R.; Cravens, T.; Galeazzi, M.; Koutroumpa, D.; Kuntz, K. D.; Lallement, R.; Lepri, S. T.; Liu, W.; hide

    2016-01-01

    DXL (Diffuse X-ray emission from the Local Galaxy) is a sounding rocket mission designed to estimate the contribution of solar wind charge eXchange (SWCX) to the diffuse X-ray background and to help determine the properties of the Local Hot Bubble. The detectors are large area thin-window proportional counters with a spectral response that is similar to that of the PSPC (Position Sensitive Proportional Counters) used in the ROSAT All Sky Survey (RASS). A direct comparison of DXL and RASS data for the same part of the sky viewed from quite different vantage points in the solar system, and the assumption of approximate isotropy for the solar wind, allowed us to quantify the SWCX contribution to all six RASS bands (R1-R7, excluding R3). We find that the SWCX contribution at l = 140 degrees, b = 0 degrees, where the DXL path crosses the Galactic plane, is 33 percent plus or minus 6 percent (statistical) plus or minus 12 percent (systematic) for R1, 44 percent plus or minus 6 percent plus or minus 5 percent for R2, 18 percent plus or minus 12 percent plus or minus 11 percent for R4, 14 percent plus or minus 11 percent plus or minus 9 percent for R5, and negligible for the R6 and R7 bands. Reliable models for the distribution of neutral H and He in the solar system permit estimation of the contribution of interplanetary SWCX emission over the the whole sky and correction of the RASS maps. We find that the average SWCX contribution in the whole sky is 26 percent plus or minus 6 percent plus or minus 13 percent for R1, 30 percent plus or minus 4 percent plus or minus 4 percent for R2, 8 percent plus or minus 5 percent plus or minus 5 percent for R4, 6 percent plus or minus 4 percent plus or minus 4 percent for R5, and negligible for R6 and R7.

  10. Mapping Nearby Galaxies at APO: The MaNGA IFU Galaxy Survey

    Science.gov (United States)

    Law, David R.; MaNGA Team

    2014-01-01

    MaNGA is a new survey that will begin in August 2014 as part of SDSS-IV with the aim of obtaining integral-field spectroscopy for an unprecedented sample of 10,000 nearby galaxies. MaNGA's key goals are to understand the "life cycle" of present day galaxies from imprinted clues of their birth and assembly, through their ongoing growth via star formation and merging, to their death from quenching at late times. To achieve these goals, MaNGA will channel the impressive capabilities of the SDSS-III BOSS spectrographs in a fundamentally new direction by marshaling the unique power of 2D spectroscopy. MaNGA will deploy 17 pluggable Integral Field Units (IFUs) made by grouping fibers into hexagonal bundles ranging from 19 to 127 fibers each. The spectra obtained by MaNGA will cover the wavelength range 3600-10,000 Angstroms (with a velocity resolution of ~ 60 km/s) and will characterize the internal composition and the dynamical state of a sample of 10,000 galaxies with stellar masses greater than 10^9 Msun and an average redshift of z ~ 0.03. Such IFU observations enable a leap forward because they provide an added dimension to the information available for each galaxy. MaNGA will provide two-dimensional maps of stellar velocity and velocity dispersion, mean stellar age and star formation history, stellar metallicity, element abundance ratio, stellar mass surface density, ionized gas velocity, ionized gas metallicity, star formation rate, and dust extinction for a statistically powerful sample. This legacy dataset will address urgent questions in our understanding of galaxy formation, including 1) The formation history of galaxy subcomponents, including the disk, bulge, and dark matter halo, 2) The nature of present-day galaxy growth via merging and gas accretion, and 3) The processes responsible for terminating star formation in galaxies. Finally, MaNGA will also play a vital role in the coming era of advanced IFU instrumentation, serving as the low-z anchor for

  11. Map of CCAA policy links | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The CCAA program supports participatory action research that informs policy processes with science-based evidence on vulnerability and adaptation. This map shows the connections of CCAA projects where there has been sustained interaction with policymaking bodies at the local, national or regional level. Download the ...

  12. Involving Families and Communities in CSPAP Development Using Asset Mapping

    Science.gov (United States)

    Allar, Ishonté; Elliott, Eloise; Jones, Emily; Kristjansson, Alfgeir L.; Taliaferro, Andrea; Bulger, Sean M.

    2017-01-01

    The purpose of this article is to provide an introduction to asset mapping as a systematic approach to facilitating increased family and community involvement in comprehensive school physical activity programs (CSPAP). It includes a brief summary of the literature related to the importance of family and community in children's physical activity…

  13. Developing Cognitive Models for Social Simulation from Survey Data

    Science.gov (United States)

    Alt, Jonathan K.; Lieberman, Stephen

    The representation of human behavior and cognition continues to challenge the modeling and simulation community. The use of survey and polling instruments to inform belief states, issue stances and action choice models provides a compelling means of developing models and simulations with empirical data. Using these types of data to population social simulations can greatly enhance the feasibility of validation efforts, the reusability of social and behavioral modeling frameworks, and the testable reliability of simulations. We provide a case study demonstrating these effects, document the use of survey data to develop cognitive models, and suggest future paths forward for social and behavioral modeling.

  14. Development of District-Based Mineral-Hazards Maps for Highways in California

    Science.gov (United States)

    Higgins, C. T.; Churchill, R. K.; Fonseca, M. C.

    2011-12-01

    The California Geological Survey (CGS) currently is developing a series of unpublished maps for the California Department of Transportation (Caltrans) that shows potential for mineral hazards within each of the twelve highway districts administered by that agency. Where present along or near highway corridors, such hazards may pose problems for human health and safety or the environment. Prepared at a scale of 1:250,000, the maps are designed as initial screening tools for Caltrans staff to use to improve planning of activities that involve new construction projects, routine maintenance of highways, and emergency removal of debris deposited on roads by natural processes. Although the basic presentation of each type of thematic map in the series is the same, some customization and focus are allowed for each district because each has unique issues concerning potential for mineral hazards. The maps display many natural and man-made features that may be potential sources of mineral hazards within each district. Features compiled and evaluated under our definition of "mineral hazards" are: 1) naturally-occurring asbestos (NOA); 2) natural occurrences of various regulated metals (Ag, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Ni, Pb, Tl, V, Zn) and metalloids (As, Sb, Se) as well as other pertinent metals, such as Mn and U; 3) faults, which can be sites of increased potential for certain types of mineralization, such as NOA; 4) mines and prospects, which can be sources of anomalous concentrations of metals as well as ore-processing chemicals; 5) natural petroleum features, such as oil and natural-gas seeps; 6) natural geothermal features, such as thermal springs and fumaroles; and 7) oil, natural-gas, and geothermal wells. Because of their greater potential as sources of mineral hazards, localities designated on the maps as "areas of potential mineralogical concern" are of particular interest to Caltrans. Examples include significant mining districts, such as New Almaden (Hg) near

  15. Icebase: A suborbital survey to map geothermal heat flux under an ice sheet

    Science.gov (United States)

    Purucker, Michael E.; Connerney, John E. P.; Blakely, Richard J.; Bracken, Robert E.; Nowicki, Sophie; Le, Guan; Sabaka, Terence J.; Bonalsky, Todd M.; Kuang, Weijia; Ravat, Dhananjay; Ritz, Catherine; Vaughan, Alan P. M.; Gaina, Carmen; McEnroe, Suzanne; Lesur, Vincent

    2013-04-01

    NASA will solicit suborbital missions as part of its Earth Venture program element in the coming year. These missions are designed as complete PI-led investigations to conduct innovative hypothesis or scientific question-driven approaches to pressing questions in Earth System science. We propose to carry out a suborbital magnetic survey of Greenland using NASA's Global Hawk unmanned aerial vehicle to produce the first-ever map of the geothermal heat flux under an ice sheet. Better constraints on geothermal heat flux will reduce the uncertainty in future sea level rise, in turn allowing a more informed assessment of its impact on society. The geothermal heat flux depends on conditions such as mantle heat flux, and the tectonic history and heat production of the crust, all of which vary spatially. Underneath ice sheets, the geothermal heat flux influences the basal ice. Therefore heat flux is an important boundary condition in ice sheet modeling. Using magnetic data to constrain heat flux is possible because the magnetic properties of rocks are temperature dependent until they reach the Curie temperature. The technique has applications to understanding the response of Greenland ice sheet to climate forcing because the basal heat flux provides one of the boundary conditions. The technique also helps to locate the oldest ice. The oldest ice in Greenland should be found in areas of very low heat flux, and the identification of those areas is provided by this technique. Ice cores from the areas of oldest ice help to decipher past temperatures and CO2 contents. Our latest model of the geothermal heat flux under the Greenland ice sheet (http://websrv.cs.umt.edu/isis/index.php/Greenland_Basal_Heat_Flux) is based on low- resolution satellite observations collected by the CHAMP satellite between 2000 and 2010. Those observations will be enhanced by the upcoming Swarm gradient satellite mission, but the resolution will improve by less than a factor of two, from 400 km

  16. Minerals, lands, and geology for the common defence and general welfare, Volume 2, 1879-1904 : A history of geology in relation to the development of public-land, federal-science, and mapping policies and the development of mineral resources in the United States during the first 25 years of the U.S. Geological Survey

    Science.gov (United States)

    Rabbitt, Mary C.

    1980-01-01

    In the traditional view of the Survey's first 25 years, which are the subject of much of this volume, John Wesley Powell, with his broad view of science and advanced ideas of land and water in the West, is the heroic figure. Clarence King is dismissed as brilliant but with a limited view of science as mining geology, and Charles D. Walcott is regarded primarily as a brilliant paleontologist chosen by Powell to succeed him. The Survey's first quarter century, however, spanned a watershed in American history that separated a primarily rural and agrarian nation and a primarily urban and industrial nation, a nation intent on conquering the continent and isolated from the Old World and a nation involved in world politics, a nation that believed in the virtues of competition and limited government and a nation that saw the virtue of cooperation and insisted on reform and regulation to ensure equal opportunities to all. Science itself changed during this period. The age of instruments was just beginning when the Survey was established; by the turn of the century, instruments had almost revolutionized science and the era of the lone investigator had to give way to an era of organized effort in the solution of problems.

  17. The quality of sample surveys in a developing nation

    Directory of Open Access Journals (Sweden)

    Paul A Bourne

    2010-08-01

    Full Text Available Paul A Bourne1, Christopher AD Charles2,3, Neva South-Bourne4, Chloe Morris1, Denise Eldemire-Shearer1, Maureen D Kerr-Campbell51Department of Community Health and Psychiatry, Faculty of Medical Sciences, University of the West Indies, Mona, Kingston, Jamaica; 2King Graduate School, Monroe College, Bronx, New York, USA; 3Center for Victim Support, Harlem Hospital Center, New York, USA; 4Research assistant for Paul A Bourne; 5Systems Development Unit, Main Library, Faculty of Humanities and Education, University of the West Indies, Mona, Kingston, JamaicaBackground: In Jamaica, population census began in 1844, and many intercensal ratios obtained from the census data showed that there is a general high degree of accuracy of the data. However, statistics from the Jamaican Ministry of Health showed that there are inaccuracies in health data collected from males using sample surveys.Objectives: The objectives of the present research are to 1 investigate the accuracy of a national sample survey, 2 explore the feasibility and quality of using a subnational sample survey to represent a national survey, 3 aid other scholars in understanding the probability of using national sample surveys and subnational sample surveys, 4 assess older men’s ­evaluation of their health status, and 5 determine whether dichotomization changes self-evaluated health status.Methods: For the current study, the data used in the analysis were originally collected from 2 different sources: 1 the Jamaica Survey of Living Conditions (JSLC and 2 Survey of Older Men (SOM. Cross validation of self-evaluated data of men in Jamaica was done with comparable samples of the complete JSLC data and the SOM data, where men older than 55 years were selected from each sample.Results: In study 1, 50.2% of respondents indicated at least good self-evaluated health status compared with 74.0% in study 2. Statistical associations were found between health status and survey sample (Χ2 [df = 5

  18. Report on technological trend survey in fiscal 2000. Survey on bio-technology development strategy; 2000 nendo gijutsu doko nado chosa hokokusho. Bio technology gijutsu kaihatsu senryaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Survey and research have been performed on bio-technologies as to their seeds of technological development projects to be worked on by the government from the viewpoint of industrial utilization technologies. In the survey on the trends of research and development and technological development on human-genomes, the survey has been done on the status of execution in the Millennium Genome Project, and how the works related to human-genomes are done at the bio-related government based research organizations and the private sector research organizations. Trends related to the human-genome research in overseas countries were also surveyed. With regard to the future prospect of research and development in the post genome age, discussions were given on the result of the questionnaire survey on opinion leaders in the industrial, governmental and academic areas. In discussing the viewpoint of the industrial utilization technologies related to human genomes, candidates assumed usable in the genome related application fields were discussed, and a basic framework of a technological map was prepared. Based on the results thereof, the technological development areas anticipated to be important in the future were extracted, and the technological development themes were discussed. (NEDO)

  19. Validity of the language development survey in infants born preterm.

    Science.gov (United States)

    Beaulieu-Poulin, Camille; Simard, Marie-Noëlle; Babakissa, Hélène; Lefebvre, Francine; Luu, Thuy Mai

    2016-07-01

    Preterm infants are at greater risk of language delay. Early identification of language delay is essential to improve functional outcome in these children. To examine the concurrent validity of Rescorla's Language Development Survey and the Bayley Scales of Infant and Toddler Development (Bayley-III) at 18months corrected age in preterm infants. Test accuracy study. 189 preterm infants born Language Development Survey, a parent-reported screening instrument, was administered in French concurrently with the Language Scales of the Bayley-III. Receiver-Operating-Characteristics curves were used to determine optimal cut-off score on the Language Development Survey to identify Bayley-III score language delay as per the Bayley-III. The optimal threshold was ≤10 words for both boys and girls. In girls, lowering the cut-off score decreased sensitivity (79%), but improved specificity (82%), thus lowering the number of false-positives. Our findings support using the Language Development Survey as an expressive language screener in preterm infants. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  20. American Samoa: coral reef monitoring interactive map and information layers primarily from 2010 surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This interactive map displays American Samoa data collected by the NOAA Coral Reef Ecosystem Division (CRED) during the Pacific Reef Assessment and Monitoring...

  1. Designing and Testing a UAV Mapping System for Agricultural Field Surveying

    Directory of Open Access Journals (Sweden)

    Martin Peter Christiansen

    2017-11-01

    Full Text Available A Light Detection and Ranging (LiDAR sensor mounted on an Unmanned Aerial Vehicle (UAV can map the overflown environment in point clouds. Mapped canopy heights allow for the estimation of crop biomass in agriculture. The work presented in this paper contributes to sensory UAV setup design for mapping and textual analysis of agricultural fields. LiDAR data are combined with data from Global Navigation Satellite System (GNSS and Inertial Measurement Unit (IMU sensors to conduct environment mapping for point clouds. The proposed method facilitates LiDAR recordings in an experimental winter wheat field. Crop height estimates ranging from 0.35–0.58 m are correlated to the applied nitrogen treatments of 0–300 kg N ha . The LiDAR point clouds are recorded, mapped, and analysed using the functionalities of the Robot Operating System (ROS and the Point Cloud Library (PCL. Crop volume estimation is based on a voxel grid with a spatial resolution of 0.04 × 0.04 × 0.001 m. Two different flight patterns are evaluated at an altitude of 6 m to determine the impacts of the mapped LiDAR measurements on crop volume estimations.

  2. Designing and Testing a UAV Mapping System for Agricultural Field Surveying.

    Science.gov (United States)

    Christiansen, Martin Peter; Laursen, Morten Stigaard; Jørgensen, Rasmus Nyholm; Skovsen, Søren; Gislum, René

    2017-11-23

    A Light Detection and Ranging (LiDAR) sensor mounted on an Unmanned Aerial Vehicle (UAV) can map the overflown environment in point clouds. Mapped canopy heights allow for the estimation of crop biomass in agriculture. The work presented in this paper contributes to sensory UAV setup design for mapping and textual analysis of agricultural fields. LiDAR data are combined with data from Global Navigation Satellite System (GNSS) and Inertial Measurement Unit (IMU) sensors to conduct environment mapping for point clouds. The proposed method facilitates LiDAR recordings in an experimental winter wheat field. Crop height estimates ranging from 0.35-0.58 m are correlated to the applied nitrogen treatments of 0-300 kg N ha . The LiDAR point clouds are recorded, mapped, and analysed using the functionalities of the Robot Operating System (ROS) and the Point Cloud Library (PCL). Crop volume estimation is based on a voxel grid with a spatial resolution of 0.04 × 0.04 × 0.001 m. Two different flight patterns are evaluated at an altitude of 6 m to determine the impacts of the mapped LiDAR measurements on crop volume estimations.

  3. Development and Validation of the Poverty Attributions Survey

    Science.gov (United States)

    Bennett, Robert M.; Raiz, Lisa; Davis, Tamara S.

    2016-01-01

    This article describes the process of developing and testing the Poverty Attribution Survey (PAS), a measure of poverty attributions. The PAS is theory based and includes original items as well as items from previously tested poverty attribution instruments. The PAS was electronically administered to a sample of state-licensed professional social…

  4. The SCUBA-2 Cosmology Legacy Survey: 850 μm maps, catalogues and number counts

    NARCIS (Netherlands)

    Geach, J. E.; Dunlop, J. S.; Halpern, M.; Smail, Ian; van der Werf, P.; Alexander, D. M.; Almaini, O.; Aretxaga, I.; Arumugam, V.; Asboth, V.; Banerji, M.; Beanlands, J.; Best, P. N.; Blain, A. W.; Birkinshaw, M.; Chapin, E. L.; Chapman, S. C.; Chen, C.-C.; Chrysostomou, A.; Clarke, C.; Clements, D. L.; Conselice, C.; Coppin, K. E. K.; Cowley, W. I.; Danielson, A. L. R.; Eales, S.; Edge, A. C.; Farrah, D.; Gibb, A.; Harrison, C. M.; Hine, N. K.; Hughes, D.; Ivison, R. J.; Jarvis, M.; Jenness, T.; Jones, S. F.; Karim, A.; Koprowski, M.; Knudsen, K. K.; Lacey, C. G.; Mackenzie, T.; Marsden, G.; McAlpine, K.; McMahon, R.; Meijerink, R.; Michałowski, M. J.; Oliver, S. J.; Page, M. J.; Peacock, J. A.; Rigopoulou, D.; Robson, E. I.; Roseboom, I.; Rotermund, K.; Scott, Douglas; Serjeant, S.; Simpson, C.; Simpson, J. M.; Smith, D. J. B.; Spaans, M.; Stanley, F.; Stevens, J. A.; Swinbank, A. M.; Targett, T.; Thomson, A. P.; Valiante, E.; Wake, D. A.; Webb, T. M. A.; Willott, C.; Zavala, J. A.; Zemcov, M.

    2017-01-01

    We present a catalogue of ˜3000 submillimetre sources detected (≥3.5σ) at 850 μm over ˜5 deg2 surveyed as part of the James Clerk Maxwell Telescope (JCMT) SCUBA-2 Cosmology Legacy Survey (S2CLS). This is the largest survey of its kind at 850 μm, increasing the sample size of 850 μm selected

  5. Development of suitability maps for ground-coupled heat pump systems using groundwater and heat transport models

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, Hikari; Itoi, Ryuichi [Department of Earth Resources Engineering, Faculty of Engineering, Kyushu University, Motooka 744, Nishi-ku, Fukuoka 819-0395 (Japan); Inatomi, Tadasuke [YBM Co. Ltd., Kishiyama 589-10 Kitahata, Karatsu 847-1211 (Japan); Uchida, Youhei [Geological Survey of Japan, AIST Tsukuba Central 7, Tsukuba 305-8567 (Japan)

    2007-10-15

    The thermophysical properties of subsurface materials (soils, sediments and rocks) and groundwater flow strongly affect the heat exchange rates of ground heat exchangers (GHEs). These rates can be maximized and the installation costs of the ground-coupled heat pump (GCHP) systems reduced by developing suitability maps based on local geological and hydrological information. Such maps were generated for the Chikushi Plain (western Japan) using field-survey data and a numerical modeling study. First, a field-wide groundwater model was developed for the area and the results matched against measured groundwater levels and vertical temperature profiles. Single GHE models were then constructed to simulate the heat exchange performance at different locations in the plain. Finally, suitability maps for GCHP systems were prepared using the results from the single GHE models. Variations in the heat exchange rates of over 40% revealed by the map were ascribed to differences in the GHE locations, confirming how important it is to use appropriate thermophysical data when designing GCHP systems. (author)

  6. Development of Web Mapping Service Capabilities to Support NASA Disasters Applications/App Development

    Science.gov (United States)

    Burks, Jason E.; Molthan, Andrew L.; McGrath, Kevin M.

    2014-01-01

    During the last year several significant disasters have occurred such as Superstorm Sandy on the East coast of the United States, and Typhoon Bopha in the Phillipines, along with several others. In support of these disasters NASA's Short-term Prediction Research and Transition (SPoRT) Center delivered various products derived from satellite imagery to help in the assessment of damage and recovery of the affected areas. To better support the decision makers responding to the disasters SPoRT quickly developed several solutions to provide the data using open Geographical Information Service (GIS) formats. Providing the data in open GIS standard formats allowed the end user to easily integrate the data into existing Decision Support Systems (DSS). Both Tile Mapping Service (TMS) and Web Mapping Service (WMS) were leveraged to quickly provide the data to the end-user. Development of the deliver methodology allowed quick response to rapidly developing disasters and enabled NASA SPoRT to bring science data to decision makers in a successful research to operations transition.

  7. Facilitating genome navigation : survey sequencing and dense radiation-hybrid gene mapping

    NARCIS (Netherlands)

    Hitte, C; Madeoy, J; Kirkness, EF; Priat, C; Lorentzen, TD; Senger, F; Thomas, D; Derrien, T; Ramirez, C; Scott, C; Evanno, G; Pullar, B; Cadieu, E; Oza, [No Value; Lourgant, K; Jaffe, DB; Tacher, S; Dreano, S; Berkova, N; Andre, C; Deloukas, P; Fraser, C; Lindblad-Toh, K; Ostrander, EA; Galibert, F

    Accurate and comprehensive sequence coverage for large genomes has been restricted to only a few species of specific interest. Lower sequence coverage (survey sequencing) of related species can yield a wealth of information about gene content and putative regulatory elements. But survey sequences

  8. Customer Acceptance Survey On Chrysanthemum Mutant Developed By Nuclear Malaysia

    International Nuclear Information System (INIS)

    Shakinah Salleh; Zaiton Ahmad; Affrida Hassan; Shuhaimi Shamsudin; Nurul Hidayah Mahmud; Salim Othman; Mohamed Najli Mohamed Yasin

    2014-01-01

    Chrysanthemum morifolium is an important temperate cut flower for Malaysian floriculture industry and the lack of new local-owned varieties has led to this mutation breeding research. The project was started in 2008 under bilateral cooperation between Nuclear Malaysia and JAEA (Japan Atomic Energy Agency). Through this project, 8 new varieties of chrysanthemum were successfully developed, in which 4 varieties were from red cultivar and another 4 from pink cultivar. A preliminary survey on public perception and acceptance of these mutants was conducted on 7 January 2014 at Agrotechnology and Biosciences Division, Malaysian Nuclear Agency. The main objective of this survey was to gather information from the public on overall appearance of these new varieties and their potential for commercialization. Approximately 60 participants were involved in this survey, which include staff of Nuclear Malaysia, university students, plant growers/collectors and hobbyists. (author)

  9. Development of carborne gamma-ray survey system

    International Nuclear Information System (INIS)

    Sakamoto, Ryuichi; Tsutsumi, Masahiro

    1999-01-01

    A carborne γ-ray survey system was developed aiming at implementation of environmental radiation investigation in and around Chernobyl area after the accident. This system consists of a dose rate meter, a GPS and a personal computer, and acquires γ-ray dose rates and positional data using two serial ports of the computer. It is indispensable to acquire these two kinds of data simultaneously for carborne γ-ray survey in a large area. A feature of the system is to be able to get these data continuously by means of a simple programming. This system has been used in and around Chernobyl area for a few years, and it has worked without any troubles. The outline of this survey system, which is applicable for configuration of environmental radiation data acquisition system is reported with some results in Chernobyl. (author)

  10. Concept-Mapping Tools and the Development of Students' Critical-Thinking Skills

    Science.gov (United States)

    Tseng, Sheng-Shiang

    2015-01-01

    Developing students' critical-thinking skills has recently received attention at all levels of education. This article proposes the use of concept-mapping tools to improve students' critical-thinking skills. The article introduces a Web-based concept-mapping tool--Popplet--and demonstrates its application for teaching critical-thinking skills in…

  11. Concept and development of information flow diagram for literature survey

    International Nuclear Information System (INIS)

    Noda, Masaru; Sato, Shoko; Ueda, Tadashi; Tsuchi, Hiroyuki; Koike, Akihisa

    2007-01-01

    The Information Flow Diagram for Literature Survey (IFDLS) has been developed to manage information and procedure in the literature survey phase of the PTAs selection process. It is a tool utilizing information technology, which can organize, analyze, and evaluate information from literature survey and manage their process systematically. IFDLS is able to show the flow of information and data, and the history of information management processing. Information coverage and quality is not homogenous throughout the country and, in some areas, there may not even be sufficient data available to be able to reach a judgment on conformity with the site-specific evaluation factors (SSEF). Literature surveys could only be conducted on a volunteer area before it is nominated as a PIA. However, the absence of information on any factor mentioned will not constitute disqualification of the area. On the contrary, an attempt to compare these sites with analogous areas in Japan will be done to assemble sufficient data and consequently make a decision on whether to proceed further. The application of IFDLS to literature survey phase of the PIA selection process is being proposed. The concept, construction, application and evolution of IFDLS towards application phase on a trial basis are discussed. (authors)

  12. Biocultural research in global mental health: mapping idioms of distress onto blood pressure in a population survey.

    Science.gov (United States)

    Sancilio, Amelia; Eggerman, Mark; Panter-Brick, Catherine

    2017-01-01

    Biocultural research remains a challenge in the field of global mental health. We sought to test associations between blood pressure and idioms of distress in a population survey. We drew on a randomly selected sample of 991 adults (498 men, 493 women) in Afghanistan, for whom physiological and psychosocial data were systematically collected. Assessment of mental health (Self-Reported Questionnaire, Afghan Symptom Checklist) included conceptualizations of distress related to pressure (fishar), anxiety, and dysphoria, as well as dimensions of negative affect and aggression. We used principal component analysis to map survey responses to fishar, and multiple regressions to examine associations with systolic/diastolic blood pressure, controlling for age, body mass index, and wealth, and differentiating by gender, mental health, and medication. The Afghan sample averaged 129/80 mmHg, with 27.14% of hypertensive individuals. SBP showed inverse associations with reports of low fishar (β = -4.58, P < .001) and high fishar (β = 6.90, P < .001), as did DPB with low fishar (β = -1.55, P < .001) and high fishar (β = 3.77, P < .001). Low and high fishar responses accounted for substantial proportions of SBP data variation (R 2  = 20% and R 2  = 24%), especially in adults on blood pressure medication (R 2  = 58% and R 2  = 49%). Subjective reports of fishar map onto physiological blood pressure more robustly than other conceptualizations of mental distress related to anxiety, dysphoria, negative affect, or aggression. Our results point to the utility of mapping biological and cultural measures of stress and distress, advancing biopsychosocial understandings of wellbeing in global mental health surveys. © 2016 Wiley Periodicals, Inc.

  13. Mapping and prediction of schistosomiasis in Nigeria using compiled survey data and Bayesian geospatial modelling

    DEFF Research Database (Denmark)

    Ekpo, Uwem F.; Hürlimann, Eveline; Schur, Nadine

    2013-01-01

    Schistosomiasis prevalence data for Nigeria were extracted from peer-reviewed journals and reports, geo-referenced and collated in a nationwide geographical information system database for the generation of point prevalence maps. This exercise revealed that the disease is endemic in 35 of the cou......Schistosomiasis prevalence data for Nigeria were extracted from peer-reviewed journals and reports, geo-referenced and collated in a nationwide geographical information system database for the generation of point prevalence maps. This exercise revealed that the disease is endemic in 35...

  14. Towards comparability of data: using the ICF to map the contrasting definitions of disability in Irish surveys and census, 2000-2006.

    Science.gov (United States)

    O'Donovan, Mary-Ann; Good, Anne

    2010-01-01

    To examine how disability was measured and understood within Irish data sources 2000-2006, using the International Classification of Functioning, Disability and Health (ICF) as a guiding framework for a more comprehensive and transformative definition of disability. During the EU-funded Measuring Health and Disability in Europe (MHADIE) project (2003-2006), an audit of data sources which included a disability identifier question was conducted. Thirty Irish data sources were examined in total. An overview of these data sources was provided in 'Disability Data Sources in Ireland' (National Disability Authority, unpublished, 2007). Using guidelines developed by Cieza et al. (J Rehabil Med 2002;34:205-210, J Rehabil Med 2002;27:212-218) five data sources were selected for detailed examination and were mapped to the ICF. These were the census (2006), National Disability Survey (2006), National Physical and Sensory Disability Database (2006), Survey of Lifestyles, Attitudes and Nutrition (2002), Euro Student Survey (2003). Subsequent work conducted after the completion of the MHADIE project added to the findings. The environmental dimension of disability dominated the data collection exercises which used the ICF as their framework-for the National Disability Survey (NDS) and the National Physical and Sensory Disability Database (NPSDD). Both also had strong focus on activity and participation. When mapped on to the ICF, the data sources which preceded the ICF or did not use it, are shown to focus more on activity and participation data than any other ICF component. Across the five selected data sources, limited information was collected on body function and body structure.

  15. Development of PIC-based digital survey meter

    International Nuclear Information System (INIS)

    Nor Arymaswati Abdullah; Nur Aira Abdul Rahman; Mohd Ashhar Khalid; Taiman Kadni; Glam Hadzir Patai Mohamad; Abd Aziz Mhd Ramli; Chong Foh Yong

    2006-01-01

    The need of radiation monitoring and monitoring of radioactive contamination in the workplace is very important especially when x-ray machines, linear accelerators, electron beam machines and radioactive sources are present. The appropriate use of radiation detector is significant in order to maintain a radiation and contamination free workplace. This paper reports on the development of a prototype of PIC-based digital survey meter. This prototype of digital survey meter is a hand held instrument for general-purpose radiation monitoring and surface contamination meter. Generally, the device is able to detect some or all of the three major types of ionizing radiation, namely alpha, beta and gamma. It uses a Geiger-Muller tube as a radiation detector, which converts gamma radiation quanta to electric pulses and further processed by the electronic devices. The development involved the design of the controller, counter and high voltage circuit. All these circuit are assembled and enclosed in a plastic casing together with a GM detector and LCD display to form a prototype survey meter. The number of counts of the pulses detected by the survey meter varies due to the random nature of radioactivity. By averaging the reading over a time-period, more accurate and stable reading is achieved. To test the accuracy and the linearity of the design, the prototype was calibrated using standard procedure at the Secondary Standard Dosimetry Laboratory (SSDL) in MINT. (Author)

  16. Robustness of risk maps and survey networks to knowledge gaps about a new invasive pest

    Science.gov (United States)

    Denys Yemshanov; Frank H. Koch; Yakov Ben-Haim; William D. Smith

    2010-01-01

    In pest risk assessment it is frequently necessary to make management decisions regarding emerging threats under severe uncertainty. Although risk maps provide useful decision support for invasive alien species, they rarely address knowledge gaps associated with the underlying risk model or how they may change the risk estimates. Failure to recognize uncertainty leads...

  17. Diagrams: A Visual Survey of Graphs, Maps, Charts and Diagrams for the Graphic Designer.

    Science.gov (United States)

    Lockwood, Arthur

    Since the ultimate success of any diagram rests in its clarity, it is important that the designer select a method of presentation which will achieve this aim. He should be aware of the various ways in which statistics can be shown diagrammatically, how information can be incorporated in maps, and how events can be plotted in chart or graph form.…

  18. Magnetic surveying as an aid to geological mapping: a case study ...

    African Journals Online (AJOL)

    A magnetic map of the Obafemi Awolowo University (OAU) Campus, in Ile-Ife, was produced from ground magnetic measurements on all the roads and footpaths. The study was aimed at improving our knowledge of the structural disposition of the lithologies within the area. The magnetic data obtained were subjected to ...

  19. A Survey of Formal Methods in Software Development

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2012-01-01

    The use of formal methods and formal techniques in industry is steadily growing. In this survey we shall characterise what we mean by software development and by a formal method; briefly overview a history of formal specification languages - some of which are: VDM (Vienna Development Method, 1974...... need for multi-language formalisation (Petri Nets, MSC, StateChart, Temporal Logics); the sociology of university and industry acceptance of formal methods; the inevitability of the use of formal software development methods; while referring to seminal monographs and textbooks on formal methods....

  20. Aerial radiometric and magnetic survey, Reno national topographic map, Nevada. Volume 1

    International Nuclear Information System (INIS)

    1978-01-01

    The Reno Map Sheet covers part of western Nevada between latitudes 39 0 and 40 0 north and longitudes 118 0 and 120 0 west. The area includes parts of Churchill, Mineral, Nye, Douglas, Lyon, Storey and Washoe counties. The area is located within the limits of the Basin and Range Physiographic Province but borders the Sierra Nevada immediately to its west. The eastern half of the Reno Map Sheet is dominated by the Carson Sink. The western half of the map sheet contains a greater number of ranges. The basin areas are less extensive. In the western half of the map sheet Mesozoic aged metamorphic rocks occur as isolated outcrops surrounded by Cenozoic deposits or Cretaceous plutonic rocks. Metamorphism of the volcanic and sedimentary rocks occurred prior to and during the plutonic intrusions. Extensive portions of southern Washoe and Storey counties are covered by Late Pleistocene and Recent alluvial deposits and alluvial fans. In the eastern half of the map sheet the peripheral mountain ranges are underlain by Cenozoic volcanic and sedimentary rocks. Mesozoic rocks of Triassic to Middle Jurassic age occur throughout the mountain ranges. The narrower eastern valleys are underlain by Quaternary alluvial and lacustrine deposits which are approximately contemporaneous with the Pleistocene aged deposits of Lake Lahontan which formerly occupied the Carson Sink. Much of the present day topography of the basins and ranges is a result of intermittent Cenozoic structural deformation which continues to the present. The major uranium ore occurrences are in Storey and Washoe counties and are closely associated with the Cenozoic volcanic or volcano-sedimentary rocks. In the Red Rock Canyon area and in Churchill County uranium concentration is specifically related to lignitic shale or lignite occurrences

  1. Transforming NAD 27 and NAD 83 positions : making legacy mapping and surveys GPS compatible.

    Science.gov (United States)

    2015-06-01

    The Connecticut Department of Transportation (CTDOT) and the University of Connecticut are creating a real-time network (RTN) to make real-time surveying widely available in Connecticut. This RTN uses global navigation satellite system (GNSS) technol...

  2. EMODnet High Resolution Seabed Mapping - further developing a high resolution digital bathymetry for European seas

    Science.gov (United States)

    Schaap, D.; Schmitt, T.

    2017-12-01

    Access to marine data is a key issue for the EU Marine Strategy Framework Directive and the EU Marine Knowledge 2020 agenda and includes the European Marine Observation and Data Network (EMODnet) initiative. EMODnet aims at assembling European marine data, data products and metadata from diverse sources in a uniform way. The EMODnet Bathymetry project has developed Digital Terrain Models (DTM) for the European seas. These have been produced from survey and aggregated data sets that are indexed with metadata by adopting the SeaDataNet Catalogue services. SeaDataNet is a network of major oceanographic data centres around the European seas that manage, operate and further develop a pan-European infrastructure for marine and ocean data management. The latest EMODnet Bathymetry DTM release has a grid resolution of 1/8 arcminute and covers all European sea regions. Use has been made of circa 7800 gathered survey datasets and composite DTMs. Catalogues and the EMODnet DTM are published at the dedicated EMODnet Bathymetry portal including a versatile DTM viewing and downloading service. End December 2016 the Bathymetry project has been succeeded by EMODnet High Resolution Seabed Mapping (HRSM). This continues gathering of bathymetric in-situ data sets with extra efforts for near coastal waters and coastal zones. In addition Satellite Derived Bathymetry data are included to fill gaps in coverage of the coastal zones. The extra data and composite DTMs will increase the coverage of the European seas and its coastlines, and provide input for producing an EMODnet DTM with a common resolution of 1/16 arc minutes. The Bathymetry Viewing and Download service will be upgraded to provide a multi-resolution map and including 3D viewing. The higher resolution DTMs will also be used to determine best-estimates of the European coastline for a range of tidal levels (HAT, MHW, MSL, Chart Datum, LAT), thereby making use of a tidal model for Europe. Extra challenges will be `moving to the

  3. Development of a Colorectal Cancer Screening Intervention for Iranian Adults: Appling Intervention Mapping

    Science.gov (United States)

    Besharati, Fereshteh; Karimi-Shahanjarini, Akram; Hazavehei, Seyed Mohammad Mehdi; Bashirian, Saeid; Bagheri, Fahimeh; Faradmal, Javad

    2017-08-27

    Background: While the incidence rate of the colorectal cancer (CRC) has been increasing over the last three decades in Iran, very limited interventions to increase CRC screening have been developed for Iranian population. The purpose of this study was to describe the use of Intervention Mapping (IM) for applying theory and evidence and considering local contexts to develop a CRC screening program among adults in Iran. Materials and Methods: From April 2014 to July 2016 following the IM process, six steps were formulated and implemented. First a need assessment was conducted involving relevant stakeholders and using focus groups discussions (n=10), individual interviews (n=20), and a household survey (n= 480). Then a matrix of change objectives was developed for each behavioral outcome and theoretical methods and their practical applications were identified to guide intervention development and implementation. A multi-component intervention was developed and piloted. Decision on suitable parts of intervention was made based on feedback of pilot study. Finally, evaluation plan including process and outcome evaluation was generated and conducted to inform future scale up. Results: The needs assessment highlighted factors affecting CRC screening including knowledge, self efficacy, social support and perceived benefit and barriers (financial problems, fear of detection of cancer and etc). Results of needs assessment were used to develop next steps IM. The program utilized methods like information delivery, modeling, and persuasion. Practical applications included video presentation, group discussion, role playing and postcards.This program was assessed through a cluster-randomized controlled trial. Results showed that there were significant differences in CRC screening uptake between intervention groups and control (Pintervention addressing CRC screening among Iranian population. Creative Commons Attribution License

  4. Development of aerial gamma radiation survey system, 1

    International Nuclear Information System (INIS)

    Tsutsumi, Masahiro; Saito, Komei; Sakamoto, Ryuichi; Nagaoka, Toshi; Moriuchi, Shigeru

    1986-05-01

    JAERI has started to develop an aerial gamma radiation survey system by a helicopter in 1980. The development of measuring instruments, the experiments in the field of natural and artificial radiation sources, and the imaginary emergency survey at a real site, were executed. This report describes mainly about the hardware and software of this system. The system consists of gamma-ray measuring instruments with NaI(Tl) scintillation detectors, microwave positioning instruments, and a data processing system for postflight data. A foreign-made geological survey system is improved on for radiation measurements. For covering the wide radiation range, detectors of various shapes and sizes are prepared, from a large volume detector, DET-1024 - four 4'' x 4'' x 16'' crystals assembly - to a 2'' diameter x 2'' NaI(Tl) crystal. Radiation and position data are recorded on a magnetic tape, and computer-processed afterwards. Moreover, scene below flight courses and internal communication are recorded on video tape with the information of clock and position superimposed. In consequence of field experiments carried out five times, basic radiation data for evaluating airborne acquired data are accumulated, and flight survey procedures are established. As more practical use, a system has been produced more compactly and functionally. Exposure rates (> 1 mR/h), energy distribution spectra, and energy window counts are obtained for radiation data. Using the Spectrum-Dose Conversion Method, the accurate exposure rates are directly calculated from pulse height spectra. Numerical tables of G(E) function converting pulse height spectra into exposures are shown in this report. As regards the analysis of survey data, process codes have been completed with either large-computer or mini-computer. (author)

  5. Mapping plant species ranges in the Hawaiian Islands: developing a methodology and associated GIS layers

    Science.gov (United States)

    Price, Jonathan P.; Jacobi, James D.; Gon, Samuel M.; Matsuwaki, Dwight; Mehrhoff, Loyal; Wagner, Warren; Lucas, Matthew; Rowe, Barbara

    2012-01-01

    This report documents a methodology for projecting the geographic ranges of plant species in the Hawaiian Islands. The methodology consists primarily of the creation of several geographic information system (GIS) data layers depicting attributes related to the geographic ranges of plant species. The most important spatial-data layer generated here is an objectively defined classification of climate as it pertains to the distribution of plant species. By examining previous zonal-vegetation classifications in light of spatially detailed climate data, broad zones of climate relevant to contemporary concepts of vegetation in the Hawaiian Islands can be explicitly defined. Other spatial-data layers presented here include the following: substrate age, as large areas of the island of Hawai'i, in particular, are covered by very young lava flows inimical to the growth of many plant species; biogeographic regions of the larger islands that are composites of multiple volcanoes, as many of their species are restricted to a given topographically isolated mountain or a specified group of them; and human impact, which can reduce the range of many species relative to where they formerly were found. Other factors influencing the geographic ranges of species that are discussed here but not developed further, owing to limitations in rendering them spatially, include topography, soils, and disturbance. A method is described for analyzing these layers in a GIS, in conjunction with a database of species distributions, to project the ranges of plant species, which include both the potential range prior to human disturbance and the projected present range. Examples of range maps for several species are given as case studies that demonstrate different spatial characteristics of range. Several potential applications of species-range maps are discussed, including facilitating field surveys, informing restoration efforts, studying range size and rarity, studying biodiversity, managing

  6. Barberry rust surveydeveloping tools for diagnosis, analysis and data management

    DEFF Research Database (Denmark)

    Justesen, Annemarie Fejer; Hansen, Jens Grønbech; Hovmøller, Mogens Støvring

    Barberry (Berberis spp.) may serve as alternate host of several Puccinia species including Puccinia graminis and P. striiformis causing stem and yellow rust on cereals and grasses, respectively. In order to study the importance of barberry in the epidemiology of Puccinia species in the CWANA regi...... a rust survey was initiated. The aim was to 1) develop a surveillance protocol 2) develop molecular diagnostic tools for identifying Puccinia spp. from aecial samples, and 3) develop a data management and display system of results as part of the Wheat Rust ToolBox (http....... Due to variable quality of aecial samples DNA extraction was not successful for 40% of the samples. Sequences of EF1α, β-tubulin or ITS were analysed and compared to reference sequences of rust fungi infecting cereals and grasses. The analysis supported the presence of P. graminis s.l., P....... arrhenatheri and P. striiformoides on barberry species. Survey and DNA sample maps with species designation were displayed in the Wheat Rust ToolBox. The future aim is to integrate barberry rust survey data based on molecular diagnostics and infection assays from research groups world-wide in order to gain...

  7. Aerial radiometric and magnetic survey: McIntosh National Topographic Map, North Dakota/South Dakota. Final report

    International Nuclear Information System (INIS)

    1981-01-01

    The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the McIntosh National Topographic Map NL14-7 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

  8. Geological survey of Maryland using EREP flight data. [mining, mapping, Chesapeake Bay islands, coastal water features

    Science.gov (United States)

    Weaver, K. N. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. Underflight photography has been used in the Baltimore County mined land inventory to determine areas of disturbed land where surface mining of sand and ground clay, or stone has taken place. Both active and abandoned pits and quarries were located. Aircraft data has been used to update cultural features of Calvert, Caroline, St. Mary's, Somerset, Talbot, and Wicomico Counties. Islands have been located and catalogued for comparison with older film and map data for erosion data. Strip mined areas are being mapped to obtain total area disturbed to aid in future mining and reclamation problems. Coastal estuarine and Atlantic Coast features are being studied to determine nearshore bedforms, sedimentary, and erosional patterns, and manmade influence on natural systems.

  9. Uncertainty in mapped geological boundaries held by a national geological survey:eliciting the geologists' tacit error model

    Science.gov (United States)

    Lark, R. M.; Lawley, R. S.; Barron, A. J. M.; Aldiss, D. T.; Ambrose, K.; Cooper, A. H.; Lee, J. R.; Waters, C. N.

    2015-06-01

    It is generally accepted that geological line work, such as mapped boundaries, are uncertain for various reasons. It is difficult to quantify this uncertainty directly, because the investigation of error in a boundary at a single location may be costly and time consuming, and many such observations are needed to estimate an uncertainty model with confidence. However, it is recognized across many disciplines that experts generally have a tacit model of the uncertainty of information that they produce (interpretations, diagnoses, etc.) and formal methods exist to extract this model in usable form by elicitation. In this paper we report a trial in which uncertainty models for geological boundaries mapped by geologists of the British Geological Survey (BGS) in six geological scenarios were elicited from a group of five experienced BGS geologists. In five cases a consensus distribution was obtained, which reflected both the initial individually elicited distribution and a structured process of group discussion in which individuals revised their opinions. In a sixth case a consensus was not reached. This concerned a boundary between superficial deposits where the geometry of the contact is hard to visualize. The trial showed that the geologists' tacit model of uncertainty in mapped boundaries reflects factors in addition to the cartographic error usually treated by buffering line work or in written guidance on its application. It suggests that further application of elicitation, to scenarios at an appropriate level of generalization, could be useful to provide working error models for the application and interpretation of line work.

  10. A Survey Work on Optimization Techniques Utilizing Map Reduce Framework in Hadoop Cluster

    OpenAIRE

    Bibhudutta Jena; Mahendra Kumar Gourisaria; Siddharth Swarup Rautaray; Manjusha Pandey

    2017-01-01

    Data is one of the most important and vital aspect of different activities in today's world. Therefore vast amount of data is generated in each and every second. A rapid growth of data in recent time in different domains required an intelligent data analysis tool that would be helpful to satisfy the need to analysis a huge amount of data. Map Reduce framework is basically designed to process large amount of data and to support effective decision making. It consists of ...

  11. The Trauma Center Organizational Culture Survey: development and conduction.

    Science.gov (United States)

    Davis, Matthew L; Wehbe-Janek, Hania; Subacius, Haris; Pinto, Ruxandra; Nathens, Avery B

    2015-01-01

    The Trauma Center Organizational Culture Survey (TRACCS) instrument was developed to assess organizational culture of trauma centers enrolled in the American College of Surgeons Trauma Quality Program (ACS TQIP). The objective is to provide evidence on the psychometric properties of the factors of TRACCS and describe the current organizational culture of TQIP-enrolled trauma centers. A cross-sectional study was conducted by surveying a sampling of employees at 174 TQIP-enrolled trauma centers. Data collection was preceded by multistep survey development. Psychometric properties were assessed by an exploratory factor analysis (construct validity) and the item-total correlations and Cronbach alpha were calculated (internal reliability). Statistical outcomes of the survey responses were measured by descriptive statistics and mixed effect models. The response rate for trauma center participation in the study was 78.7% (n = 137). The factor analysis resulted in 16 items clustered into three factors as described: opportunity, pride, and diversity, trauma center leadership, and employee respect and recognition. TRACCS was found to be highly reliable with a Cronbach alpha of 0.90 in addition to the three factors (0.91, 0.90, and 0.85). Considerable variability of TRACCS overall and factor score among hospitals was measured, with the largest interhospital deviations among trauma center leadership. More than 80% of the variability in the responses occurred within rather than between hospitals. TRACCS was developed as a reliable tool for measuring trauma center organizational culture. Relationships between TQIP outcomes and measured organizational culture are under investigation. Trauma centers could apply TRACCS to better understand current organizational culture and how change tools can impact culture and subsequent patient and process outcomes. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. The 13th Data Release of the Sloan Digital Sky Survey: First Spectroscopic Data from the SDSS-IV Survey Mapping Nearby Galaxies at Apache Point Observatory

    Science.gov (United States)

    Albareti, Franco D.; Allende Prieto, Carlos; Almeida, Andres; Anders, Friedrich; Anderson, Scott; Andrews, Brett H.; Aragón-Salamanca, Alfonso; Argudo-Fernández, Maria; Armengaud, Eric; Aubourg, Eric; Avila-Reese, Vladimir; Badenes, Carles; Bailey, Stephen; Barbuy, Beatriz; Barger, Kat; Barrera-Ballesteros, Jorge; Bartosz, Curtis; Basu, Sarbani; Bates, Dominic; Battaglia, Giuseppina; Baumgarten, Falk; Baur, Julien; Bautista, Julian; Beers, Timothy C.; Belfiore, Francesco; Bershady, Matthew; Bertran de Lis, Sara; Bird, Jonathan C.; Bizyaev, Dmitry; Blanc, Guillermo A.; Blanton, Michael; Blomqvist, Michael; Bolton, Adam S.; Borissova, J.; Bovy, Jo; Nielsen Brandt, William; Brinkmann, Jonathan; Brownstein, Joel R.; Bundy, Kevin; Burtin, Etienne; Busca, Nicolás G.; Orlando Camacho Chavez, Hugo; Cano Díaz, M.; Cappellari, Michele; Carrera, Ricardo; Chen, Yanping; Cherinka, Brian; Cheung, Edmond; Chiappini, Cristina; Chojnowski, Drew; Chuang, Chia-Hsun; Chung, Haeun; Cirolini, Rafael Fernando; Clerc, Nicolas; Cohen, Roger E.; Comerford, Julia M.; Comparat, Johan; Correa do Nascimento, Janaina; Cousinou, Marie-Claude; Covey, Kevin; Crane, Jeffrey D.; Croft, Rupert; Cunha, Katia; Darling, Jeremy; Davidson, James W., Jr.; Dawson, Kyle; Da Costa, Luiz; Da Silva Ilha, Gabriele; Deconto Machado, Alice; Delubac, Timothée; De Lee, Nathan; De la Macorra, Axel; De la Torre, Sylvain; Diamond-Stanic, Aleksandar M.; Donor, John; Downes, Juan Jose; Drory, Niv; Du, Cheng; Du Mas des Bourboux, Hélion; Dwelly, Tom; Ebelke, Garrett; Eigenbrot, Arthur; Eisenstein, Daniel J.; Elsworth, Yvonne P.; Emsellem, Eric; Eracleous, Michael; Escoffier, Stephanie; Evans, Michael L.; Falcón-Barroso, Jesús; Fan, Xiaohui; Favole, Ginevra; Fernandez-Alvar, Emma; Fernandez-Trincado, J. G.; Feuillet, Diane; Fleming, Scott W.; Font-Ribera, Andreu; Freischlad, Gordon; Frinchaboy, Peter; Fu, Hai; Gao, Yang; Garcia, Rafael A.; Garcia-Dias, R.; Garcia-Hernández, D. A.; Garcia Pérez, Ana E.; Gaulme, Patrick; Ge, Junqiang; Geisler, Douglas; Gillespie, Bruce; Gil Marin, Hector; Girardi, Léo; Goddard, Daniel; Gomez Maqueo Chew, Yilen; Gonzalez-Perez, Violeta; Grabowski, Kathleen; Green, Paul; Grier, Catherine J.; Grier, Thomas; Guo, Hong; Guy, Julien; Hagen, Alex; Hall, Matt; Harding, Paul; Harley, R. E.; Hasselquist, Sten; Hawley, Suzanne; Hayes, Christian R.; Hearty, Fred; Hekker, Saskia; Hernandez Toledo, Hector; Ho, Shirley; Hogg, David W.; Holley-Bockelmann, Kelly; Holtzman, Jon A.; Holzer, Parker H.; Hu, Jian; Huber, Daniel; Hutchinson, Timothy Alan; Hwang, Ho Seong; Ibarra-Medel, Héctor J.; Ivans, Inese I.; Ivory, KeShawn; Jaehnig, Kurt; Jensen, Trey W.; Johnson, Jennifer A.; Jones, Amy; Jullo, Eric; Kallinger, T.; Kinemuchi, Karen; Kirkby, David; Klaene, Mark; Kneib, Jean-Paul; Kollmeier, Juna A.; Lacerna, Ivan; Lane, Richard R.; Lang, Dustin; Laurent, Pierre; Law, David R.; Leauthaud, Alexie; Le Goff, Jean-Marc; Li, Chen; Li, Cheng; Li, Niu; Li, Ran; Liang, Fu-Heng; Liang, Yu; Lima, Marcos; Lin, Lihwai; Lin, Lin; Lin, Yen-Ting; Liu, Chao; Long, Dan; Lucatello, Sara; MacDonald, Nicholas; MacLeod, Chelsea L.; Mackereth, J. Ted; Mahadevan, Suvrath; Geimba Maia, Marcio Antonio; Maiolino, Roberto; Majewski, Steven R.; Malanushenko, Olena; Malanushenko, Viktor; Dullius Mallmann, Nícolas; Manchado, Arturo; Maraston, Claudia; Marques-Chaves, Rui; Martinez Valpuesta, Inma; Masters, Karen L.; Mathur, Savita; McGreer, Ian D.; Merloni, Andrea; Merrifield, Michael R.; Meszáros, Szabolcs; Meza, Andres; Miglio, Andrea; Minchev, Ivan; Molaverdikhani, Karan; Montero-Dorta, Antonio D.; Mosser, Benoit; Muna, Demitri; Myers, Adam; Nair, Preethi; Nandra, Kirpal; Ness, Melissa; Newman, Jeffrey A.; Nichol, Robert C.; Nidever, David L.; Nitschelm, Christian; O’Connell, Julia; Oravetz, Audrey; Oravetz, Daniel J.; Pace, Zachary; Padilla, Nelson; Palanque-Delabrouille, Nathalie; Pan, Kaike; Parejko, John; Paris, Isabelle; Park, Changbom; Peacock, John A.; Peirani, Sebastien; Pellejero-Ibanez, Marcos; Penny, Samantha; Percival, Will J.; Percival, Jeffrey W.; Perez-Fournon, Ismael; Petitjean, Patrick; Pieri, Matthew; Pinsonneault, Marc H.; Pisani, Alice; Prada, Francisco; Prakash, Abhishek; Price-Jones, Natalie; Raddick, M. Jordan; Rahman, Mubdi; Raichoor, Anand; Barboza Rembold, Sandro; Reyna, A. M.; Rich, James; Richstein, Hannah; Ridl, Jethro; Riffel, Rogemar A.; Riffel, Rogério; Rix, Hans-Walter; Robin, Annie C.; Rockosi, Constance M.; Rodríguez-Torres, Sergio; Rodrigues, Thaíse S.; Roe, Natalie; Lopes, A. Roman; Román-Zúñiga, Carlos; Ross, Ashley J.; Rossi, Graziano; Ruan, John; Ruggeri, Rossana; Runnoe, Jessie C.; Salazar-Albornoz, Salvador; Salvato, Mara; Sanchez, Sebastian F.; Sanchez, Ariel G.; Sanchez-Gallego, José R.; Santiago, Basílio Xavier; Schiavon, Ricardo; Schimoia, Jaderson S.; Schlafly, Eddie; Schlegel, David J.; Schneider, Donald P.; Schönrich, Ralph; Schultheis, Mathias; Schwope, Axel; Seo, Hee-Jong; Serenelli, Aldo; Sesar, Branimir; Shao, Zhengyi; Shetrone, Matthew; Shull, Michael; Silva Aguirre, Victor; Skrutskie, M. F.; Slosar, Anže; Smith, Michael; Smith, Verne V.; Sobeck, Jennifer; Somers, Garrett; Souto, Diogo; Stark, David V.; Stassun, Keivan G.; Steinmetz, Matthias; Stello, Dennis; Storchi Bergmann, Thaisa; Strauss, Michael A.; Streblyanska, Alina; Stringfellow, Guy S.; Suarez, Genaro; Sun, Jing; Taghizadeh-Popp, Manuchehr; Tang, Baitian; Tao, Charling; Tayar, Jamie; Tembe, Mita; Thomas, Daniel; Tinker, Jeremy; Tojeiro, Rita; Tremonti, Christy; Troup, Nicholas; Trump, Jonathan R.; Unda-Sanzana, Eduardo; Valenzuela, O.; Van den Bosch, Remco; Vargas-Magaña, Mariana; Vazquez, Jose Alberto; Villanova, Sandro; Vivek, M.; Vogt, Nicole; Wake, David; Walterbos, Rene; Wang, Yuting; Wang, Enci; Weaver, Benjamin Alan; Weijmans, Anne-Marie; Weinberg, David H.; Westfall, Kyle B.; Whelan, David G.; Wilcots, Eric; Wild, Vivienne; Williams, Rob A.; Wilson, John; Wood-Vasey, W. M.; Wylezalek, Dominika; Xiao, Ting; Yan, Renbin; Yang, Meng; Ybarra, Jason E.; Yeche, Christophe; Yuan, Fang-Ting; Zakamska, Nadia; Zamora, Olga; Zasowski, Gail; Zhang, Kai; Zhao, Cheng; Zhao, Gong-Bo; Zheng, Zheng; Zheng, Zheng; Zhou, Zhi-Min; Zhu, Guangtun; Zinn, Joel C.; Zou, Hu

    2017-12-01

    The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) began observations in 2014 July. It pursues three core programs: the Apache Point Observatory Galactic Evolution Experiment 2 (APOGEE-2), Mapping Nearby Galaxies at APO (MaNGA), and the Extended Baryon Oscillation Spectroscopic Survey (eBOSS). As well as its core program, eBOSS contains two major subprograms: the Time Domain Spectroscopic Survey (TDSS) and the SPectroscopic IDentification of ERosita Sources (SPIDERS). This paper describes the first data release from SDSS-IV, Data Release 13 (DR13). DR13 makes publicly available the first 1390 spatially resolved integral field unit observations of nearby galaxies from MaNGA. It includes new observations from eBOSS, completing the Sloan Extended QUasar, Emission-line galaxy, Luminous red galaxy Survey (SEQUELS), which also targeted variability-selected objects and X-ray-selected objects. DR13 includes new reductions of the SDSS-III BOSS data, improving the spectrophotometric calibration and redshift classification, and new reductions of the SDSS-III APOGEE-1 data, improving stellar parameters for dwarf stars and cooler stars. DR13 provides more robust and precise photometric calibrations. Value-added target catalogs relevant for eBOSS, TDSS, and SPIDERS and an updated red-clump catalog for APOGEE are also available. This paper describes the location and format of the data and provides references to important technical papers. The SDSS web site, http://www.sdss.org, provides links to the data, tutorials, examples of data access, and extensive documentation of the reduction and analysis procedures. DR13 is the first of a scheduled set that will contain new data and analyses from the planned ∼6 yr operations of SDSS-IV.

  13. Mapping Out Your Success: Using Mind Maps to Evaluate Youth Development Programs

    Directory of Open Access Journals (Sweden)

    Mary Sara Wells

    2009-06-01

    Full Text Available A primary component of any youth program is documenting and promoting the results through evaluation. Frequently, however, administrators in youth development programs struggle to find meaningful ways of evaluating the impacts they have on the lives of youth. It is often difficult to capture the unique benefits these programs offer to participants, especially when traditional methods such as focus groups and interviews may be too time consuming and questionnaires may yield poor response rates. This article presents a creative form of evaluation targeted at demonstrating the success of programs in outcomes that are historically more difficult to measure. A “mind map” is designed to be a pictorial representation of the impact of programs in areas such as connections to community organization and adult role models. Employing this technique can enable administrators in youth development programs to demonstrate to stakeholders the benefits they provide in a non-traditional, but highly effective, way.

  14. Technology, design and dementia: an exploratory survey of developers.

    Science.gov (United States)

    Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

    2017-08-01

    Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

  15. OVERVIEW OF THE SDSS-IV MaNGA SURVEY: MAPPING NEARBY GALAXIES AT APACHE POINT OBSERVATORY

    Energy Technology Data Exchange (ETDEWEB)

    Bundy, Kevin [Kavli Institute for the Physics and Mathematics of the Universe (Kavli IPMU, WPI), Todai Institutes for Advanced Study, the University of Tokyo, Kashiwa 277-8583 (Japan); Bershady, Matthew A.; Wake, David A.; Tremonti, Christy; Diamond-Stanic, Aleksandar M. [Department of Astronomy, University of Wisconsin-Madison, 475 North Charter Street, Madison, WI 53706 (United States); Law, David R.; Cherinka, Brian [Dunlap Institute for Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto, Ontario M5S 3H4 (Canada); Yan, Renbin; Sánchez-Gallego, José R. [Department of Physics and Astronomy, University of Kentucky, 505 Rose Street, Lexington, KY 40506-0055 (United States); Drory, Niv [McDonald Observatory, Department of Astronomy, University of Texas at Austin, 1 University Station, Austin, TX 78712-0259 (United States); MacDonald, Nicholas [Department of Astronomy, Box 351580, University of Washington, Seattle, WA 98195 (United States); Weijmans, Anne-Marie [School of Physics and Astronomy, University of St Andrews, North Haugh, St Andrews KY16 9SS (United Kingdom); Thomas, Daniel; Masters, Karen; Coccato, Lodovico [Institute of Cosmology and Gravitation, University of Portsmouth, Portsmouth (United Kingdom); Aragón-Salamanca, Alfonso [School of Physics and Astronomy, University of Nottingham, University Park, Nottingham NG7 2RD (United Kingdom); Avila-Reese, Vladimir [Instituto de Astronomia, Universidad Nacional Autonoma de Mexico, A.P. 70-264, 04510 Mexico D.F. (Mexico); Badenes, Carles [Department of Physics and Astronomy and Pittsburgh Particle Physics, Astrophysics and Cosmology Center (PITT PACC), University of Pittsburgh, 3941 OHara St, Pittsburgh, PA 15260 (United States); Falcón-Barroso, Jésus [Instituto de Astrofísica de Canarias, E-38200 La Laguna, Tenerife (Spain); Belfiore, Francesco [Cavendish Laboratory, University of Cambridge, 19 J. J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom); and others

    2015-01-01

    We present an overview of a new integral field spectroscopic survey called MaNGA (Mapping Nearby Galaxies at Apache Point Observatory), one of three core programs in the fourth-generation Sloan Digital Sky Survey (SDSS-IV) that began on 2014 July 1. MaNGA will investigate the internal kinematic structure and composition of gas and stars in an unprecedented sample of 10,000 nearby galaxies. We summarize essential characteristics of the instrument and survey design in the context of MaNGA's key science goals and present prototype observations to demonstrate MaNGA's scientific potential. MaNGA employs dithered observations with 17 fiber-bundle integral field units that vary in diameter from 12'' (19 fibers) to 32'' (127 fibers). Two dual-channel spectrographs provide simultaneous wavelength coverage over 3600-10300 Å at R ∼ 2000. With a typical integration time of 3 hr, MaNGA reaches a target r-band signal-to-noise ratio of 4-8 (Å{sup –1} per 2'' fiber) at 23 AB mag arcsec{sup –2}, which is typical for the outskirts of MaNGA galaxies. Targets are selected with M {sub *} ≳ 10{sup 9} M {sub ☉} using SDSS-I redshifts and i-band luminosity to achieve uniform radial coverage in terms of the effective radius, an approximately flat distribution in stellar mass, and a sample spanning a wide range of environments. Analysis of our prototype observations demonstrates MaNGA's ability to probe gas ionization, shed light on recent star formation and quenching, enable dynamical modeling, decompose constituent components, and map the composition of stellar populations. MaNGA's spatially resolved spectra will enable an unprecedented study of the astrophysics of nearby galaxies in the coming 6 yr.

  16. OVERVIEW OF THE SDSS-IV MaNGA SURVEY: MAPPING NEARBY GALAXIES AT APACHE POINT OBSERVATORY

    International Nuclear Information System (INIS)

    Bundy, Kevin; Bershady, Matthew A.; Wake, David A.; Tremonti, Christy; Diamond-Stanic, Aleksandar M.; Law, David R.; Cherinka, Brian; Yan, Renbin; Sánchez-Gallego, José R.; Drory, Niv; MacDonald, Nicholas; Weijmans, Anne-Marie; Thomas, Daniel; Masters, Karen; Coccato, Lodovico; Aragón-Salamanca, Alfonso; Avila-Reese, Vladimir; Badenes, Carles; Falcón-Barroso, Jésus; Belfiore, Francesco

    2015-01-01

    We present an overview of a new integral field spectroscopic survey called MaNGA (Mapping Nearby Galaxies at Apache Point Observatory), one of three core programs in the fourth-generation Sloan Digital Sky Survey (SDSS-IV) that began on 2014 July 1. MaNGA will investigate the internal kinematic structure and composition of gas and stars in an unprecedented sample of 10,000 nearby galaxies. We summarize essential characteristics of the instrument and survey design in the context of MaNGA's key science goals and present prototype observations to demonstrate MaNGA's scientific potential. MaNGA employs dithered observations with 17 fiber-bundle integral field units that vary in diameter from 12'' (19 fibers) to 32'' (127 fibers). Two dual-channel spectrographs provide simultaneous wavelength coverage over 3600-10300 Å at R ∼ 2000. With a typical integration time of 3 hr, MaNGA reaches a target r-band signal-to-noise ratio of 4-8 (Å –1 per 2'' fiber) at 23 AB mag arcsec –2 , which is typical for the outskirts of MaNGA galaxies. Targets are selected with M * ≳ 10 9 M ☉ using SDSS-I redshifts and i-band luminosity to achieve uniform radial coverage in terms of the effective radius, an approximately flat distribution in stellar mass, and a sample spanning a wide range of environments. Analysis of our prototype observations demonstrates MaNGA's ability to probe gas ionization, shed light on recent star formation and quenching, enable dynamical modeling, decompose constituent components, and map the composition of stellar populations. MaNGA's spatially resolved spectra will enable an unprecedented study of the astrophysics of nearby galaxies in the coming 6 yr

  17. Development of custom LCD based portable survey/contamination monitors

    International Nuclear Information System (INIS)

    Reddy, J.D.

    2010-01-01

    Equipments for carrying out radiation survey measurements for alpha, beta and gamma radiations have evolved considerably with the advancements in Electronics overtime. There are 2 major classes of portable instruments available from most manufacturers - (a) Analog indicator type (b) Direct digital readout type. Analog meters give a direct quantifying feel to radiation levels though they are not rich features nor they have smartness like a digital meter. Digital versions have advantages of direct readout numerically and configurable as per users requirements. To achieve best features of both the techniques a dual indicator type LCD module comprising of Analog indicating LCD segments and digital readout indicating 7 segments has been developed. This LCD comprising of LCD glass and its display driver has been deployed across various types of survey meters and contamination monitors manufactured by Nucleonix. This display now facilitates direct readout of dose rate/count rate in various units simultaneously in both analog LCD scale and direct digital indication. (author)

  18. Mapping of Norwegian civil society organizations working on energy and sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This study provides a mapping of Norwegian CSOs working on energy and development issues in developing countries and an overview assessment of how the CSOs fit with the priorities of the Norwegian Governments Clean Energy for Development Initiative. The study has been commissioned by Norad, the Norwegian agency for development aid. The study surveys 10 Norwegian CSOs, five of which are primarily environmentally oriented (Bellona, FIVAS, Naturvernforbundet, WWF-Norway and Zero, with green backgrounds in the tables) and five of which are primarily socially oriented (ARC-Aid, Kirkens Noedhjelp, Misjonsalliansen, Norges Vel and Utviklingsfondet, with reddish background in the tables). The study is based on a desk-top review of available material from the CSOs as well as semi-structured interviews. The goal of the Clean Energy for Development Initiative is to increase access to clean energy at an affordable price based on the long-term management of natural resources and efficient energy use. Activities shall also contribute to sustainable economic and social development in selected partner countries and to international efforts to reduce greenhouse gas emissions.The study shows that many Norwegian CSOs have potential to contribute further to effective implementation of Clean Energy for Development Initiative strategies and realization of goals: At least five Cos are already carrying out relevant work in the Initiatives core countries (ref. table A below). In addition, most of the Cos surveyed have a long track-record of relevant activities in non-core countries (ref. table A), something which provides substantial potential for transfer of relevant experience and concepts from non-core countries to work in core countries. Most of the Cos have a relevant and professional competence base, capacity and plans for scaling-up Clean Energy for Development Initiative related work.The CSOs engaged in clean energy for development activities are mainly engaged in developing clean

  19. Text analysis of open-ended survey responses : a complementary method to preference mapping

    NARCIS (Netherlands)

    ten Kleij, F; Musters, PAD

    The present study illustrates the use of computer-aided text analysis to evaluate the content of open-ended survey responses. During an in-hall test, different varieties of mayonnaise were evaluated by 165 respondents on a 10-point liking scale, with the option to freely comment on these

  20. Comprehensive QTL mapping survey dissects the complex fruit texture physiology in apple (Malus x domestica Borkh.).

    Science.gov (United States)

    Longhi, Sara; Moretto, Marco; Viola, Roberto; Velasco, Riccardo; Costa, Fabrizio

    2012-02-01

    Fruit ripening is a complex physiological process in plants whereby cell wall programmed changes occur mainly to promote seed dispersal. Cell wall modification also directly regulates the textural properties, a fundamental aspect of fruit quality. In this study, two full-sib populations of apple, with 'Fuji' as the common maternal parent, crossed with 'Delearly' and 'Pink Lady', were used to understand the control of fruit texture by QTL mapping and in silico gene mining. Texture was dissected with a novel high resolution phenomics strategy, simultaneously profiling both mechanical and acoustic fruit texture components. In 'Fuji × Delearly' nine linkage groups were associated with QTLs accounting from 15.6% to 49% of the total variance, and a highly significant QTL cluster for both textural components was mapped on chromosome 10 and co-located with Md-PG1, a polygalacturonase gene that, in apple, is known to be involved in cell wall metabolism processes. In addition, other candidate genes related to Md-NOR and Md-RIN transcription factors, Md-Pel (pectate lyase), and Md-ACS1 were mapped within statistical intervals. In 'Fuji × Pink Lady', a smaller set of linkage groups associated with the QTLs identified for fruit texture (15.9-34.6% variance) was observed. The analysis of the phenotypic variance over a two-dimensional PCA plot highlighted a transgressive segregation for this progeny, revealing two QTL sets distinctively related to both mechanical and acoustic texture components. The mining of the apple genome allowed the discovery of the gene inventory underlying each QTL, and functional profile assessment unravelled specific gene expression patterns of these candidate genes.

  1. Detailed gravity survey to help seismic microzonation: Mapping the thickness of unconsolidated deposits in Ottawa, Canada

    Science.gov (United States)

    Lamontagne, M.; Thomas, M.; Silliker, J.; Jobin, D.

    2011-11-01

    In this study, measurements of gravity were made to map and model the thickness of Quaternary deposits (sand and clay) overlying Ordovician limestones in a suburb of Ottawa (Orléans, Ontario). Because ground motion amplification is partly related to the thickness of unconsolidated deposits, this work helps refine the assessment of the earthquake damage potential of the area. It also helps the mapping of clay basins, which can locally exceed 100 m in thickness, where ground motion amplification can occur. Previous work, including well log data and seismic methods, have yielded a wealth of information on near-surface geology in Orléans, thereby providing the necessary constraints to test the applicability of gravity modeling in other locations where other methods cannot always be used. Some 104 gravity stations were occupied in an 8 × 12 km test area in the Orléans. Stations were accurately located with differential GPS that provided centimetric accuracy in elevation. Densities of the unconsolidated Quaternary deposits (Champlain Sea clay) determined on core samples and densities determined on limestone samples from outcrops were used to constrain models of the clay layer overlying the higher density bedrock formations (limestone). The gravity anomaly map delineates areas where clay basins attain > 100 m depth. Assuming a realistic density for the Champlain Sea clays (1.9-2.1 g/cm 3), the thickness over the higher density bedrock formations (Ordovician carbonate rocks) was modeled and compared with well logs and two seismic reflection profiles. The models match quite well with the information determined from well logs and seismic methods. It was found that gravity and the thickness of unconsolidated deposits are correlated but the uncertainties in both data sets preclude the definition of a direct correlation between the two. We propose that gravity measurements at a local scale be used as an inexpensive means of mapping the thickness of unconsolidated deposits

  2. Road map for renewable energy research and development in Egypt

    Directory of Open Access Journals (Sweden)

    Adel K. Khalil

    2010-01-01

    Full Text Available Egypt possesses excellent potential for renewable energy (RE including solar, wind and biomass energy. Renewable energy technologies (RETs and systems have different needs for support in terms of research and development, demonstration and market development. For this purpose, the Energy Research Center (ERC at Cairo University has carried out a study with the ultimate goal of formulating a national development strategy and action plan for the local manufacture of renewable energy systems (RESs and components. The present study positions the different RETs and RESs and identifies the research and development needs for each technology. The study also suggests how to establish a competitive market for RET. For this purpose it builds and analyses a set of likely scenarios, and proposes a practical development strategy and a detailed action plan for achieving it.

  3. Mapping of hazard from rainfall-triggered landslides in developing countries: Examples from Honduras and Micronesia

    Science.gov (United States)

    Harp, E.L.; Reid, M.E.; McKenna, J.P.; Michael, J.A.

    2009-01-01

    Loss of life and property caused by landslides triggered by extreme rainfall events demonstrates the need for landslide-hazard assessment in developing countries where recovery from such events often exceeds the country's resources. Mapping landslide hazards in developing countries where the need for landslide-hazard mitigation is great but the resources are few is a challenging, but not intractable problem. The minimum requirements for constructing a physically based landslide-hazard map from a landslide-triggering storm, using the simple methods we discuss, are: (1) an accurate mapped landslide inventory, (2) a slope map derived from a digital elevation model (DEM) or topographic map, and (3) material strength properties of the slopes involved. Provided that the landslide distribution from a triggering event can be documented and mapped, it is often possible to glean enough topographic and geologic information from existing databases to produce a reliable map that depicts landslide hazards from an extreme event. Most areas of the world have enough topographic information to provide digital elevation models from which to construct slope maps. In the likely event that engineering properties of slope materials are not available, reasonable estimates can be made with detailed field examination by engineering geologists or geotechnical engineers. Resulting landslide hazard maps can be used as tools to guide relocation and redevelopment, or, more likely, temporary relocation efforts during severe storm events such as hurricanes/typhoons to minimize loss of life and property. We illustrate these methods in two case studies of lethal landslides in developing countries: Tegucigalpa, Honduras (during Hurricane Mitch in 1998) and the Chuuk Islands, Micronesia (during Typhoon Chata'an in 2002).

  4. A regional land use survey based on remote sensing and other data: A report on a LANDSAT and computer mapping project, volume 2

    Science.gov (United States)

    Nez, G. (Principal Investigator); Mutter, D.

    1977-01-01

    The author has identified the following significant results. The project mapped land use/cover classifications from LANDSAT computer compatible tape data and combined those results with other multisource data via computer mapping/compositing techniques to analyze various land use planning/natural resource management problems. Data were analyzed on 1:24,000 scale maps at 1.1 acre resolution. LANDSAT analysis software and linkages with other computer mapping software were developed. Significant results were also achieved in training, communication, and identification of needs for developing the LANDSAT/computer mapping technologies into operational tools for use by decision makers.

  5. Developing a Robust Strategy Map in Balanced Scorecard Model Using Scenario Planning

    Directory of Open Access Journals (Sweden)

    Mostafa Jafari

    2015-01-01

    Full Text Available The key to successful strategy implementation in an organization is for people in the organization to understand it, which requires the establishment of complicated but vital processes whereby the intangible assets are converted into tangible outputs. In this regard, a strategy map is a useful tool that helps execute this difficult task. However, such maps are typically developed based on ambiguous cause-effect relationships that result from the extrapolation of past data and flawed links with possible futures. However, if the strategy map is a mere reflection of the status quo but not future conditions and does not embrace real-world uncertainties, it will endanger the organization since it posits that the current situation will continue. In order to compensate for this deficiency, the environmental scenarios affecting an organization were identified in the present study. Then the strategy map was developed in the form of a scenario-based balanced scorecard. Besides, the effect of environmental changes on the components of the strategy map was investigated using the strategy maps illustrated over time together with the corresponding cash flow vectors. Subsequently, a method was proposed to calculate the degree of robustness of every component of the strategy map for the contingency of every scenario. Finally, the results were applied to a post office.

  6. Telemedicine for Developing Countries. A Survey and Some Design Issues.

    Science.gov (United States)

    Combi, Carlo; Pozzani, Gabriele; Pozzi, Giuseppe

    2016-11-02

    Developing countries need telemedicine applications that help in many situations, when physicians are a small number with respect to the population, when specialized physicians are not available, when patients and physicians in rural villages need assistance in the delivery of health care. Moreover, the requirements of telemedicine applications for developing countries are somewhat more demanding than for developed countries. Indeed, further social, organizational, and technical aspects need to be considered for successful telemedicine applications in developing countries. We consider all the major projects in telemedicine, devoted to developing countries, as described by the proper scientific literature. On the basis of such literature, we want to define a specific taxonomy that allows a proper classification and a fast overview of telemedicine projects in developing countries. Moreover, by considering both the literature and some recent direct experiences, we want to complete such overview by discussing some design issues to be taken into consideration when developing telemedicine software systems. We considered and reviewed the major conferences and journals in depth, and looked for reports on the telemedicine projects. We provide the reader with a survey of the main projects and systems, from which we derived a taxonomy of features of telemedicine systems for developing countries. We also propose and discuss some classification criteria for design issues, based on the lessons learned in this research area. We highlight some challenges and recommendations to be considered when designing a telemedicine system for developing countries.

  7. Theory for the alignment of cortical feature maps during development

    KAUST Repository

    Bressloff, Paul C.; Oster, Andrew M.

    2010-01-01

    in development, which generates a spatially periodic modulation of experience-dependent plasticity. We determine the effects of such a modulation on a competitive Hebbian mechanism for the modification of the feedforward afferents from the left and right eyes. We

  8. Coastal Mapping for Baseline Geoscience Knowledge to Support Community Hazard Assessment and Sustainable Development, Eastern Baffin Island, Nunavut

    Science.gov (United States)

    Forbes, D. L.; Bell, T.; Campbell, D. C.; Cowan, B.; Deering, R. L.; Hatcher, S. V.; Hughes Clarke, J. E.; Irvine, M.; Manson, G. K.; Smith, I. R.; Edinger, E.

    2015-12-01

    Since 2012 we have carried out extensive multibeam bathymetric and backscatter surveys in coastal waters of eastern Baffin Island, supplemented by sub-bottom imaging and coring. Shore-zone surveys have been undertaken in proximity to the communities of Iqaluit and Qikiqtarjuaq, following earlier work in Clyde River. These support benthic habitat mapping, geological exploration, analysis of past and present sea-level trends, and assessment of coastal hazards relating to climate change and seabed instability. Outputs include a seamless topographic-bathymetric digital elevation model (DEM) of extensive boulder-strewn tidal flats in the large tidal-range setting at Iqaluit, supporting analysis of coastal flooding, wave run-up, and sea-ice impacts on a rapidly developing urban waterfront in the context of climate change. Seabed mapping of inner Frobisher Bay seaward of Iqaluit reveals a potential local tsunami hazard in widespread submarine slope failures, the triggers, magnitudes, and ages of which are the subject of ongoing research. In fjords of the Cumberland Peninsula, this project has mapped numerous submerged delta terraces at 19 to 45 m present water depth. These attest to an early postglacial submerged shoreline, displaced by glacial-isostatic adjustment. It rises linearly over a distance of 100 km east to west, where a submerged boulder barricade on a -16 m shoreline was discovered at a proposed port site in Broughton Channel near Qikiqtarjuaq. Palaeotopographic mapping using the multibeam data revealed an enclosed estuarine environment quite different from the present-day open passage swept by tidal currents. At Clyde River, combined seabed and onshore DEMs with geohazard mapping provided foundation data for community assessment and planning under a local knowledge co-production initiative. The geohazard work identified portions of the town-site more vulnerable to both coastal flooding and potential thaw subsidence, while the shallow delta terrace suggested a

  9. Mapping the relationship between higher education and sustainable development

    DEFF Research Database (Denmark)

    Holm, Claus; Martinsen, Anders

    2015-01-01

    are in a conflict with each other and with respect to understanding of as well higher education, in casu the curriculum and assessment activity of the university, as sustainable development – and, first of all, it gives rise to very different conditions for future forms of life and learning inside as well......The article presents different approaches to the relationship between higher education and sustainable development. The purpose is firstly to provide an overview of four main approaches to this relationship and these approaches’ key conflicts. Secondly, the purpose is to argue that the approach...... "lifelong learning skills for a resilient life" is beginning to establish itself as part of a main conflict with the approach "necessary knowledge for a secured life". That is to say that these two approaches to the question of the relationship between higher education and sustainable development...

  10. Development and Application of the Key Technologies for the Quality Control and Inspection of National Geographical Conditions Survey Products

    Science.gov (United States)

    Zhao, Y.; Zhang, L.; Ma, W.; Zhang, P.; Zhao, T.

    2018-04-01

    The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth's surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of "five-in-one" quality control that is constituted by "quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions" by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

  11. Mind Mapping on Development of Human Resource of Education

    Science.gov (United States)

    Fauzi, Anis

    2016-01-01

    Human resources in the field of education consists of students, teachers, administrative staff, university students, lecturers, structural employees, educational bureaucrats, stakeholders, parents, the society around the school, and the society around the campus. The existence of human resources need to be cultivated and developed towards the…

  12. Financial landscapes reconstructed: the fine art of mapping development.

    NARCIS (Netherlands)

    Bouman, F.J.A.; Hospes, O.

    1994-01-01

    This book contains a collection of readings on financial intermediation for which the landscape is designedly chosen as a metaphor, to stimulate reflection on all the critical dimensions of financial and quasi-financial services in the processes of development. The metaphor is not only used to

  13. Mapping What Young Students Understand and Value Regarding Sustainable Development

    Science.gov (United States)

    Manni, Annika; Sporre, Karin; Ottander, Christina

    2013-01-01

    This paper presents the results of a study carried out to investigate how 10-12 year old Swedish students understand and value the issue of sustainable development. The responses from open-ended questions in a questionnaire have been analyzed through a content analysis based on a phenomenographic approach. The results show that there are…

  14. Sewerage Mapping and Information System of the Metropolis of Tokyo (SEMIS) : Details of the Development and Outline of the System

    Science.gov (United States)

    Kawakami, Kouichi; Sekita, Mitsunobu

    It is essential to manage sewerage ledgers as information when maintaining and controlling sewerage, one of the infrastructures of cities. The Bureau of Sewerage developed the full scale Sewerage Mapping and Information System (SEMIS), the first trial done by a local government in this country and has operated it since 1985. Before the development the questionnaires were conducted to survey the use of sewerage ledgers by staffs engaged in sewage works, and means of improving how to prepare plans of sewerage were considered based on them. Employing these means the Bureau made a database of plans and descriptions which comprise sewerage ledgers, and then constructed the computer system which manages it comprehensively. The details of the development and the system outline are described.

  15. Tomographic intensity mapping versus galaxy surveys: observing the Universe in H α emission with new generation instruments

    Science.gov (United States)

    Silva, B. Marta; Zaroubi, Saleem; Kooistra, Robin; Cooray, Asantha

    2018-04-01

    The H α line emission is an important probe for a number of fundamental quantities in galaxies, including their number density, star formation rate (SFR), and overall gas content. A new generation of low-resolution intensity mapping (IM) probes, e.g. SPHEREx and CDIM, will observe galaxies in H α emission over a large fraction of the sky from the local Universe till a redshift of z ˜ 6 - 10, respectively. This will also be the target line for observations by the high-resolution Euclid and WFIRST instruments in the z ˜ 0.7-2 redshift range. In this paper, we estimate the intensity and power spectra of the H α line in the z ˜ 0-5 redshift range using observed line luminosity functions (LFs), when possible, and simulations, otherwise. We estimate the significance of our predictions by accounting for the modelling uncertainties (e.g. SFR, extinction, etc.) and observational contamination. We find that IM surveys can make a statistical detection of the full H α emission between z ˜ 0.8 and 5. Moreover, we find that the high-frequency resolution and the sensitivity of the planned CDIM surveys allow for the separation of H α emission from several interloping lines. We explore ways to use the combination of these line intensities to probe galaxy properties. As expected, our study indicates that galaxy surveys will only detect bright galaxies that contribute up to a few per cent of the overall H α intensity. However, these surveys will provide important constraints on the high end of the H α LF and put strong constraints on the active galactic nucleus LF.

  16. Developing a scientific procedure for community based hazard mapping and risk mitigation

    Science.gov (United States)

    Verrier, M.

    2011-12-01

    As an international exchange student from the Geological Sciences Department at San Diego State University (SDSU), I joined the KKN-PPM program at Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia, in July 2011 for 12 days (July 4th to July 16th) of its two month duration (July 4th to August 25th). The KKN-PPM group I was attached was designated 154 and was focused in Plosorejo Village, Karanganyar, Kerjo, Central Java, Indonesia. The mission of KKN-PPM 154 was to survey Plosorejo village for existing landslides, to generate a simple hazard susceptibility map that can be understood by local villagers, and then to begin dissemination of that map into the community. To generate our susceptibility map we first conducted a geological survey of the existing landslides in the field study area, with a focus on determining landslide triggers and gauging areas for susceptibility for future landslides. The methods for gauging susceptibility included lithological observation, the presence of linear cracking, visible loss of structural integrity in structures such as villager homes, as well as collaboration with local residents and with the local rescue and response team. There were three color distinctions used in representing susceptibility which were green, where there is no immediate danger of landslide damage; orange, where transportation routes are at risk of being disrupted by landslides; and red, where imminent landslide potential puts a home in direct danger. The landslide inventory and susceptibility data was compiled into digital mediums such as CorelDraw, ArcGIS and Google Earth. Once a technical map was generated, we presented it to the village leadership for confirmation and modification based on their experience. Finally, we began to use the technical susceptibility map to draft evacuation routes and meeting points in the event of landslides, as well as simple susceptibility maps that can be understood and utilized by local villagers. Landslide mitigation

  17. Development and Validation of a Novice Teacher and Supervisor Survey

    Science.gov (United States)

    Finster, Matthew

    2017-01-01

    This brief presents initial evidence about the reliability and validity of a novice teacher survey and a novice teacher supervisor survey. The novice teacher and novice teacher supervisor surveys assess how well prepared novice teachers are to meet the job requirements of teaching. The surveys are designed to provide educator preparation programs…

  18. Collaborative Art Practices in HE: Mapping and Developing Pedagogical Models

    OpenAIRE

    Wilsmore, R; Alix, C; Dobson, E; University of Huddersfield; University of Hull; University of York St John; The Higher Education Academy; Palatine

    2010-01-01

    This project asks ‘How is interdisciplinary collaboration "taught" in HE institutions?’ and ‘What pedagogical models can be identified and developed?’\\ud Performing and Creative Arts departments in HE institutions engage students in collaborative practice within a singular discipline or across disciplines, through interdisciplinary or hybridised art forms, as curricula or extra-curricula activity. Where students are engaged with interdisciplinary collaboration within the curriculum, tuition m...

  19. Development of aerial gamma radiation survey system III

    International Nuclear Information System (INIS)

    Nagaoka, Toshi; Sakamoto, Ryuichi; Saito, Kimiaki; Tsutsumi, Masahiro; Moriuchi, Shigeru; Miyasaka, Satoshi.

    1985-01-01

    An aerial gamma-ray survey system using a helicopter has been developed since 1980 in order to perform quick gamma-ray survey covering a wide area. To form a line in the chain of the development, a series of flight measurements were conducted in Watarase reservoir, Tochigi prefecture, in which artificial gamma-ray fields were realized using 60 Co (100 and 400 mCi) and 137 Cs (100 and 300 mCi) point sources located on the ground. For the purpose of obtaining gamma-ray pulse height spectra in the field, 6 sets of NaI(Tl) scientillation detectors were prepared. These sets of detectors consist of ones for evaluation with high accuracy as the standard, for intercomparison with other authors' results, and for practical use. Two sets of them were boarded for each flight considering the exposure rate level and detector's sensitivity. The flight measurements were performed in a space of 20 m to 500 m in altitude, and 0 m to 500 m in horizontal distance from the source. The experimental results of the spatial gamma-ray distribution for each gamma-ray field satisfactorily agreed with calculational results by Monte Carlo method. Throughout this experiment, characteristics of this survey system and detectors were clarified, and versatile data processing and analysis code was completed. Also, a method for subtraction of background exposure rate in a field including artificial radiation component was discussed using energy band information, and the coefficients for this method were determined. These data obtained are expected to be used as widely applicable data not only for the interpretation of measured value, but also for analysis of environmental gamma-ray field. (author)

  20. Using an intervention mapping framework to develop an online mental health continuing education program for pharmacy staff.

    Science.gov (United States)

    Wheeler, Amanda; Fowler, Jane; Hattingh, Laetitia

    2013-01-01

    Current mental health policy in Australia recognizes that ongoing mental health workforce development is crucial to mental health care reform. Community pharmacy staff are well placed to assist people with mental illness living in the community; however, staff require the knowledge and skills to do this competently and effectively. This article presents the systematic planning and development process and content of an education and training program for community pharmacy staff, using a program planning approach called intervention mapping. The intervention mapping framework was used to guide development of an online continuing education program. Interviews with mental health consumers and carers (n = 285) and key stakeholders (n = 15), and a survey of pharmacy staff (n = 504) informed the needs assessment. Program objectives were identified specifying required attitudes, knowledge, skills, and confidence. These objectives were aligned with an education technique and delivery strategy. This was followed by development of an education program and comprehensive evaluation plan. The program was piloted face to face with 24 participants and then translated into an online program comprising eight 30-minute modules for pharmacists, 4 of which were also used for support staff. The evaluation plan provided for online participants (n ≅ 500) to be randomized into intervention (immediate access) or control groups (delayed training access). It included pre- and posttraining questionnaires and a reflective learning questionnaire for pharmacy staff and telephone interviews post pharmacy visit for consumers and carers. An online education program was developed to address mental health knowledge, attitudes, confidence, and skills required by pharmacy staff to work effectively with mental health consumers and carers. Intervention mapping provides a systematic and rigorous approach that can be used to develop a quality continuing education program for the health workforce

  1. Deformation analysis of the repeated positional surveys in the undermined localities using web applications and WMS map services

    Directory of Open Access Journals (Sweden)

    Milan Talich

    2007-06-01

    Full Text Available The XML web application for on-line calculations of deformation analysis from the repeated positional surveys using Internet service and data is described. Parameters of deformation field (strain tensors, total dilatations are determined in a grid network covering the zone of interest. Displacement vectors from repeated measurements at given points of a geodetic network represent the imput data of calculation. The calculation is based on application of the theory of continuum mechanics and its fundamental prerequisite is homogeneity of the researched territory.The application currently utilizes the Web Map Services - WMS for the graphic presentation of calculated results as GIS. This service for example enables on-line thematic map composition as defined by the user in the window of Internet explorer based on data given by servers of WMS service. Thus the user does not need to own any geographic data to create his/her GIS.Furthermore there are also given application examples of the repeated geodetic surveys used in the field at localities in the forefront of ČSA giant quarry at Komořany and in the undermined territory in Ostrava region. The examples show the independence of calculated values of tensors from rotation and translation of the coordinate systems in practise. This fact gives the evidence that the deformation analysis is more objective dynamic indicator in the researched area and not only the calculus and representation of point displacement vectors. After registration this application is at all interested persons disposal to on-line calculations via the Internet.

  2. Development of a new generation gravity map of Antarctica: ADGRAV Antarctic Digital Gravity Synthesis

    Directory of Open Access Journals (Sweden)

    R. A. Arko

    1999-06-01

    Full Text Available The U.S. National Science Foundation (NSF has agreed to support the development of a new generation gravity map of Antarctica (ADGRAV - Antarctic Digital Gravity Synthesis, funding the development of a web based access tool. The goal of this project is the creation of an on-line Antarctic gravity database which will facilitate access to improved high resolution satellite gravity models, in conjunction with shipboard, airborne, and land based gravity measurements for the continental regions. This database will complement parallel projects underway to develop new continental bedrock (BEDMAP and magnetic (ADMAP maps of Antarctica.

  3. Performance verification of Surface Mapping Instrument developed at CGM

    DEFF Research Database (Denmark)

    Bariani, Paolo

    The need of measuring narrow structures, in the micro and nano scale, over a broader range, can be satisfied by the use of highly resolving techniques, such as atomic force microscopy (AFM), in combination with probe relocation and data file stitching. At the Technical University of Denmark......, research has been carried out over the past years involving an AFM probe mounted on a coordinate measuring machine (CMM). Sensor repositioning by the CMM has made possible the inspection of relatively large samples, which are normally not investigable with AFMs. The latest step in the development...

  4. Multisource multibeam backscatter data: developing a strategy for the production of benthic habitat maps using semi-automated seafloor classification methods

    Science.gov (United States)

    Lacharité, Myriam; Brown, Craig J.; Gazzola, Vicki

    2018-06-01

    The establishment of multibeam echosounders (MBES) as a mainstream tool in ocean mapping has facilitated integrative approaches towards nautical charting, benthic habitat mapping, and seafloor geotechnical surveys. The bathymetric and backscatter information generated by MBES enables marine scientists to present highly accurate bathymetric data with a spatial resolution closely matching that of terrestrial mapping, and can generate customized thematic seafloor maps to meet multiple ocean management needs. However, when a variety of MBES systems are used, the creation of objective habitat maps can be hindered by the lack of backscatter calibration, due for example, to system-specific settings, yielding relative rather than absolute values. Here, we describe an approach using object-based image analysis to combine 4 non-overlapping and uncalibrated (backscatter) MBES coverages to form a seamless habitat map on St. Anns Bank (Atlantic Canada), a marine protected area hosting a diversity of benthic habitats. The benthoscape map was produced by analysing each coverage independently with supervised classification (k-nearest neighbor) of image-objects based on a common suite of 7 benthoscapes (determined with 4214 ground-truthing photographs at 61 stations, and characterized with backscatter, bathymetry, and bathymetric position index). Manual re-classification based on uncertainty in membership values to individual classes—especially at the boundaries between coverages—was used to build the final benthoscape map. Given the costs and scarcity of MBES surveys in offshore marine ecosystems—particularly in large ecosystems in need of adequate conservation strategies, such as in Canadian waters—developing approaches to synthesize multiple datasets to meet management needs is warranted.

  5. Development of a seroprevalence map for avian influenza in broiler chickens from Comunidad Valenciana, Spain.

    Science.gov (United States)

    2014-12-01

    The aim of this study was to design and implement a seroprevalence map based on business intelligence for low pathogenicity notifiable avian influenza (LPNAI) in broilerchickens in Comunidad Valenciana (Spain). The software mapping tool developed for this study consisted of three main phases: data collection, data analysis and data representation. To obtain the serological data, the authors analysed 8,520 serum samples from broiler farms over three years. The data were represented on a map of Comunidad Valenciana, including geographical information of flock locations to facilitate disease monitoring. No clinical signs of LPNAI were reported in the studied flocks. The data from this study showed no evidence of contact with LPNAI in broiler flocks and the novel software mapping tool proved a valuable method for easily monitoring on the serological response to avian influenza information, including geographical information.

  6. Mapping genes governing flower architecture and pollen development in a double mutant population of carrot

    Directory of Open Access Journals (Sweden)

    Holger eBudahn

    2014-10-01

    Full Text Available A linkage map of carrot (Daucus carota L. was developed in order to study reproductive traits. The F2 mapping population derived from an initial cross between a yellow leaf (yel chlorophyll mutant and a compressed lamina (cola mutant with unique flower defects of the sporophytic parts of male and female organs. The genetic map has a total length of 781 cM and included 285 loci. The length of the nine linkage groups ranged between 65 cM and 145 cM. All linkage groups have been anchored to the reference map. The objective of this study was the generation of a well-saturated linkage map of D. carota. Mapping of the cola-locus associated with flower development and fertility was successfully demonstrated. Two MADS-box genes (DcMADS3, DcMADS5 with prominent roles in flowering and reproduction as well as three additional genes (DcAOX2a, DcAOX2b, DcCHS2 with further importance for male reproduction were assigned to different loci that did not co-segregate with the cola-locus.

  7. The effect of using mind maps on the development of maths and science skills

    Directory of Open Access Journals (Sweden)

    Ozgul Polat

    2017-03-01

    Full Text Available The aim of this study is to examine the effect of mind mapping activities on the maths and science skills of children 48 to 60 months of age. The study was designed using an experimental model with a pre-test post-test and a control group. Accordingly, the hypotheses of the study was that there would be meaningful differences in the values obtained from the pre-test and post-test scores in favor of the children working with mind maps compared to the ones who did not work with mind maps. In the examination of the development of mind maps, it was observed that as the children engaged in preparing mind maps, they used skills requiring high-level mind organization. Mind maps, which can be used in all areas of life, are believed to be supportive of children's development areas and to be an important strategy for children to adopt and experience during the time of childhood.

  8. A hydrogeologic map of the Death Valley region, Nevada, and California, developed using GIS techniques

    International Nuclear Information System (INIS)

    Faunt, C.C.; D'Agnese, F.A.; Turner, A.K.

    1997-01-01

    In support of Yucca Mountain site characterization studies, a hydrogeologic framework was developed, and a hydrogeologic map was constructed for the Death Valley region. The region, covering approximately 100,000 km 2 along the Nevada-California border near Las Vegas, is characterized by isolated mountain ranges juxtaposed against broad, alluvium-filled valleys. Geologic conditions are typical of the Basin and Range Province; a variety of sedimentary and igneous intrusive and extrusive rocks have been subjected to both compressional and extensional deformation. The regional ground-water flow system can best be described as a series of connected intermontane basins in which ground-water flow occurs in basin-fill deposits, carbonate rocks, clastic rocks, and volcanic rocks. Previous investigations have developed more site-specific hydrogeologic relationships; however, few have described all the lithologies within the Death Valley regional ground-water flow system. Information required to characterize the hydrogeologic units in the region was obtained from regional geologic maps and reports. Map data were digitized from regional geologic maps and combined into a composite map using a geographic information system. This map was simplified to show 10 laterally extensive hydrogeologic units with distinct hydrologic properties. The hydraulic conductivity values for the hydrogeologic units range over 15 orders of magnitude due to the variability in burial depth and degree of fracturing

  9. Development of Probabilistic Flood Inundation Mapping For Flooding Induced by Dam Failure

    Science.gov (United States)

    Tsai, C.; Yeh, J. J. J.

    2017-12-01

    A primary function of flood inundation mapping is to forecast flood hazards and assess potential losses. However, uncertainties limit the reliability of inundation hazard assessments. Major sources of uncertainty should be taken into consideration by an optimal flood management strategy. This study focuses on the 20km reach downstream of the Shihmen Reservoir in Taiwan. A dam failure induced flood herein provides the upstream boundary conditions of flood routing. The two major sources of uncertainty that are considered in the hydraulic model and the flood inundation mapping herein are uncertainties in the dam break model and uncertainty of the roughness coefficient. The perturbance moment method is applied to a dam break model and the hydro system model to develop probabilistic flood inundation mapping. Various numbers of uncertain variables can be considered in these models and the variability of outputs can be quantified. The probabilistic flood inundation mapping for dam break induced floods can be developed with consideration of the variability of output using a commonly used HEC-RAS model. Different probabilistic flood inundation mappings are discussed and compared. Probabilistic flood inundation mappings are hoped to provide new physical insights in support of the evaluation of concerning reservoir flooded areas.

  10. Development of an intervention program to increase effective behaviours by patients and clinicians in psychiatric services: Intervention Mapping study.

    Science.gov (United States)

    Koekkoek, Bauke; van Meijel, Berno; Schene, Aart; Hutschemaekers, Giel

    2010-10-25

    Health clinicians perceive certain patients as 'difficult' across all settings, including mental health care. In this area, patients with non-psychotic disorders that become long-term care users may be perceived as obstructing their own recovery or seeking secondary gain. This negative perception of patients results in ineffective responses and low-quality care by health clinicians. Using the concept of illness behaviour, this paper describes the development, implementation, and planned evaluation of a structured intervention aimed at prevention and management of ineffective behaviours by long-term non-psychotic patients and their treating clinicians. The principles of Intervention Mapping were applied to guide the development, implementation, and planned evaluation of the intervention. Qualitative (individual and group interviews), quantitative (survey), and mixed methods (Delphi-procedure) research was used to gain a broad perspective of the problem. Empirical findings, theoretical models, and existing evidence were combined to construct a program tailored to the needs of the target groups. A structured program to increase effective illness behaviour in long-term non-psychotic patients and effective professional behaviour in their treating clinicians was developed, consisting of three subsequent stages and four substantial components, that is described in detail. Implementation took place and evaluation of the intervention is being carried out. Intervention Mapping proved to be a suitable method to develop a structured intervention for a multi-faceted problem in mental health care.

  11. An acarologic survey and Amblyomma americanum distribution map with implications for tularemia risk in Missouri

    Science.gov (United States)

    Brown, H.E.; Yates, K.F.; Dietrich, G.; MacMillan, K.; Graham, C.B.; Reese, S.M.; Helterbrand, Wm. S.; Nicholson, W.L.; Blount, K.; Mead, P.S.; Patrick, S.L.; Eisen, R.J.

    2011-01-01

    In the United States, tickborne diseases occur focally. Missouri represents a major focus of several tickborne diseases that includes spotted fever rickettsiosis, tularemia, and ehrlichiosis. Our study sought to determine the potential risk of human exposure to human-biting vector ticks in this area. We collected ticks in 79 sites in southern Missouri during June 7-10, 2009, which yielded 1,047 adult and 3,585 nymphal Amblyomma americanum, 5 adult Amblyomma maculatum, 19 adult Dermacentor variabilis, and 5 nymphal Ixodes brunneus. Logistic regression analysis showed that areas posing an elevated risk of exposure to A. americanum nymphs or adults were more likely to be classified as forested than grassland, and the probability of being classified as elevated risk increased with increasing relative humidity during the month of June (30-year average). Overall accuracy of each of the two models was greater than 70% and showed that 20% and 30% of the state were classified as elevated risk for human exposure to nymphs and adults, respectively. We also found a significant positive association between heightened acarologic risk and counties reporting tularemia cases. Our study provides an updated distribution map for A. americanum in Missouri and suggests a wide-spread risk of human exposure to A. americanum and their associated pathogens in this region. Copyright ?? 2011 by The American Society of Tropical Medicine and Hygiene.

  12. The Miocene Roof Mapping Using Microtremor Recording and Electrical Survey Method in Blida City, Algeria

    Science.gov (United States)

    Bouchelouh, Assia; Bensalem, Rabah; Zaourar, Naima; Machane, Djamel; Moulouel, Hakim; Oubaiche, El Hadi

    2018-01-01

    Bedrock depths in the Mitidja basin in general and in the Blida region in particular are still poorly known despite, the existence of some relatively deep hydraulic boreholes that intersect only superficial alluvial formations. To assess the seismic risk of Blida town, knowledge of soil amplification requires the thickness and properties of sedimentary formations that cover the substratum. For the purposes of our study, the thicknesses obtained by the vertical electric soundings, carried out in the hydrogeological study of the basin, were combined with horizontal-to-vertical spectral ratio (HVSR) microtremor recordings. This combination made it possible to determine an empirical relationship between frequency and thickness specific to the Blida site area, which enabled the roof of the Miocene to be mapped and shows slight undulations with directions compatible with the tectonic constraints of the region. The boundaries between the low and high frequencies obtained by HVSR are well materialized, at south by Sidi El Kebir river, at west by Chiffa river and in the central part by a line of direction SE-NW corresponding to the old passage of Sidi El Kebir river. The presence of low frequencies attributed to the old alluvial deposits with significant thicknesses that originate just after Sidi El Kebir river confirms that the South Mitidjian contact is subvertical.

  13. Value Chain Development as Alternative Method For Mapping Waste Management

    Directory of Open Access Journals (Sweden)

    Muhammad Saiful Hakim

    2017-06-01

    Full Text Available Solid Waste management begin at the household as waste of consumption and ended as a new form of waste product or recycling. Based on its value chain the subsequent process will have distict differences with manufacturing product. Value chain of manufacturing product will characterize as value added chain along the chain, where every side of the chain will generate positive chain. In the other hand, some parties of waste management value chain will negative value existed. Some parties in this chain will generate negative value solely because they must establish some cost for wipe the waste. Dissimilarities between value chain on product and waste will contribute to discrepancy between parties. Main purpose of this research is to identify value chain from solid waste management using value chain development. Another purpose to accomplished is to resolve discrepancy in value chain.  Research results shown that household is the parties that experiences negative value. To minimize the discrepancies there should be an action towards household

  14. Mapping indoor radon-222 in Denmark: Design and test of the statistical model used in the second nationwide survey

    DEFF Research Database (Denmark)

    Andersen, C.E.; Ulbak, K.; Damkjær, A.

    2001-01-01

    In Denmark, a new survey of indoor radon-222 has been carried out. 1-year alpha track measurements (CR-39) have been made in 3019 single-family houses. There are from 3 to 23 house measurements in each of the 275 municipalities. Within each municipality, houses have been selected randomly. One...... important outcome of the survey is the prediction of the fraction of houses in each municipality with an annual average radon concentration above 200 Bq m(-3). To obtain the most accurate estimate and to assess the associated uncertainties, a statistical model has been developed. The purpose of this paper...

  15. Development of a quantitative pachytene chromosome map and its unification with somatic chromosome and linkage maps of rice (Oryza sativa L.).

    Science.gov (United States)

    Ohmido, Nobuko; Iwata, Aiko; Kato, Seiji; Wako, Toshiyuki; Fukui, Kiichi

    2018-01-01

    A quantitative pachytene chromosome map of rice (Oryza sativa L.) was developed using imaging methods. The map depicts not only distribution patterns of chromomeres specific to pachytene chromosomes, but also the higher order information of chromosomal structures, such as heterochromatin (condensed regions), euchromatin (decondensed regions), the primary constrictions (centromeres), and the secondary constriction (nucleolar organizing regions, NOR). These features were image analyzed and quantitatively mapped onto the map by Chromosome Image Analyzing System ver. 4.0 (CHIAS IV). Correlation between H3K9me2, an epigenetic marker and formation and/or maintenance of heterochromatin, thus was, clearly visualized. Then the pachytene chromosome map was unified with the existing somatic chromosome and linkage maps by physically mapping common DNA markers among them, such as a rice A genome specific tandem repeat sequence (TrsA), 5S and 45S ribosomal RNA genes, five bacterial artificial chromosome (BAC) clones, four P1 bacteriophage artificial chromosome (PAC) clones using multicolor fluorescence in situ hybridization (FISH). Detailed comparison between the locations of the DNA probes on the pachytene chromosomes using multicolor FISH, and the linkage map enabled determination of the chromosome number and short/long arms of individual pachytene chromosomes using the chromosome number and arm assignment designated for the linkage map. As a result, the quantitative pachytene chromosome map was unified with two other major rice chromosome maps representing somatic prometaphase chromosomes and genetic linkages. In conclusion, the unification of the three rice maps serves as an indispensable basic information, not only for an in-depth comparison between genetic and chromosomal data, but also for practical breeding programs.

  16. Topographic mapping

    Science.gov (United States)

    ,

    2008-01-01

    The U.S. Geological Survey (USGS) produced its first topographic map in 1879, the same year it was established. Today, more than 100 years and millions of map copies later, topographic mapping is still a central activity for the USGS. The topographic map remains an indispensable tool for government, science, industry, and leisure. Much has changed since early topographers traveled the unsettled West and carefully plotted the first USGS maps by hand. Advances in survey techniques, instrumentation, and design and printing technologies, as well as the use of aerial photography and satellite data, have dramatically improved mapping coverage, accuracy, and efficiency. Yet cartography, the art and science of mapping, may never before have undergone change more profound than today.

  17. Linkage mapping of putative regulator genes of barley grain development characterized by expression profiling

    Directory of Open Access Journals (Sweden)

    Wobus Ulrich

    2009-01-01

    Full Text Available Abstract Background Barley (Hordeum vulgare L. seed development is a highly regulated process with fine-tuned interaction of various tissues controlling distinct physiological events during prestorage, storage and dessication phase. As potential regulators involved within this process we studied 172 transcription factors and 204 kinases for their expression behaviour and anchored a subset of them to the barley linkage map to promote marker-assisted studies on barley grains. Results By a hierachical clustering of the expression profiles of 376 potential regulatory genes expressed in 37 different tissues, we found 50 regulators preferentially expressed in one of the three grain tissue fractions pericarp, endosperm and embryo during seed development. In addition, 27 regulators found to be expressed during both seed development and germination and 32 additional regulators are characteristically expressed in multiple tissues undergoing cell differentiation events during barley plant ontogeny. Another 96 regulators were, beside in the developing seed, ubiquitously expressed among all tissues of germinating seedlings as well as in reproductive tissues. SNP-marker development for those regulators resulted in anchoring 61 markers on the genetic linkage map of barley and the chromosomal assignment of another 12 loci by using wheat-barley addition lines. The SNP frequency ranged from 0.5 to 1.0 SNP/kb in the parents of the various mapping populations and was 2.3 SNP/kb over all eight lines tested. Exploration of macrosynteny to rice revealed that the chromosomal orders of the mapped putative regulatory factors were predominantly conserved during evolution. Conclusion We identified expression patterns of major transcription factors and signaling related genes expressed during barley ontogeny and further assigned possible functions based on likely orthologs functionally well characterized in model plant species. The combined linkage map and reference

  18. Lateral Violence in Nursing Survey: Instrument Development and Validation

    Directory of Open Access Journals (Sweden)

    Lynne S. Nemeth

    2017-07-01

    Full Text Available An examination of the psychometric properties of the Lateral Violence in Nursing Survey (LVNS, an instrument previously developed to measure the perceived incidence and severity of lateral violence (LV in the nursing workplace, was carried out. Conceptual clustering and principal components analysis were used with survey responses from 663 registered nurses and ancillary nursing staff in a southeastern tertiary care medical center. Where appropriate, Cronbach’s alpha (α evaluated internal consistency. The prevalence/severity of lateral violence items constitute two distinct subscales (LV by self and others with Cronbach’s alpha of 0.74 and 0.86, respectively. The items asking about potential causes of LV are unidimensional and internally consistent (alpha = 0.77 but there is no conceptually coherent theme underlying the various causes. Respondents rating a potential LV cause as “major” scored higher on both prevalence/severity subscales than those rating it a “minor” cause or not a cause. Subsets of items on the LVNS are internally reliable, supporting construct validity. Revisions of the original LVNS instrument will improve its use in future work.

  19. Development of a scanning proton microprobe - computer-control, elemental mapping and applications

    International Nuclear Information System (INIS)

    Loevestam, Goeran.

    1989-08-01

    A scanning proton microprobe set-up has been developed at the Pelletron accelerator in Lund. A magnetic beam scanning system and a computer-control system for beam scanning and data aquisition is described. The computer system consists of a VMEbus front-end computer and a μVax-II host-computer, interfaced by means of a high-speed data link. The VMEbus computer controls data acquisition, beam charge monitoring and beam scanning while the more sophisticated work of elemental mapping and spectrum evaluations is left to the μVax-II. The calibration of the set-up is described as well as several applications. Elemental micro patterns in tree rings and bark has been investigated by means of elemental mapping and quantitative analysis. Large variations of elemental concentrations have been found for several elements within a single tree ring. An external beam set-up has been developed in addition to the proton microprobe set-up. The external beam has been used for the analysis of antique papyrus documents. Using a scanning sample procedure and particle induced X-ray emission (PIXE) analysis, damaged and missing characters of the text could be made visible by means of multivariate statistical data evaluation and elemental mapping. Also aspects of elemental mapping by means of scanning μPIXE analysis are discussed. Spectrum background, target thickness variations and pile-up are shown to influence the structure of elemental maps considerably. In addition, a semi-quantification procedure has been developed. (author)

  20. Intervention Mapping as a framework for developing an intervention at the worksite for older construction workers.

    Science.gov (United States)

    Oude Hengel, Karen M; Joling, Catelijne I; Proper, Karin I; van der Molen, Henk F; Bongers, Paulien M

    2011-01-01

    The purpose of this study was to apply the Intervention Mapping approach as a framework in the development of a worksite intervention to improve the work ability of construction workers. Development of an intervention by using the Intervention Mapping approach. Construction worksite. Construction workers aged 45 years and older. According to the principles of Intervention Mapping, evidence from the literature was combined with data collected from stakeholders (e.g., construction workers, managers, providers). The Intervention Mapping approach resulted in an intervention with the following components: (1) two individual visits of a physical therapist to lower the physical workload, (2) a Rest-Break tool to improve the balance between work and recovery, and (3) two empowerment training sessions to increase the range of influence at the worksite. Application of Intervention Mapping in the development of a worksite prevention program was useful in the construction industry to obtain a positive attitude and commitment. Stakeholders could give input regarding the program components as well as provide specific leads for the practical intervention strategy. Moreover, it also gives insight in the current theoretical and empirical knowledge in the field of improving the work ability of older workers in the construction industry.

  1. Mapping Dual-Degree Programs in Social Work and Public Health: Results From a National Survey

    Directory of Open Access Journals (Sweden)

    Dory Ziperstein

    2016-02-01

    Full Text Available Dramatic changes in the health system due to national health reform are raising important questions regarding the educational preparation of social workers for the new health arena. While dual-degree programs in public health and social work can be an important response to what is needed educationally, little is known about them. The National MSW/MPH Programs Study surveyed MSW/MPH program administrators to better understand the prevalence, models, structure, and challenges of these dual-degree programs. Forty-two programs were identified, and 97.6% of those contacted participated (n=41. Findings indicate that MSW/MPH programs are popular, increasing, geographically dispersed, and drawing talented students interested in trans-disciplinary public health social work practice. Challenges for these programs include the need for greater institutional support, particularly funding, and a general lack of best practices for MSW/MPH education. While findings from this study suggest graduates appear especially well-prepared for leadership and practice in the new health environment, additional research is needed to assess their particular contributions and career trajectories.

  2. Practical guidelines for developing a smartphone-based survey instrument

    DEFF Research Database (Denmark)

    Ohme, Jakob; de Vreese, Claes Holger; Albæk, Erik

    The increasing relevance of mobile surveys makes it important to gather empirical evidence on designs of such surveys. This research note presents the results of a test study conducted to identify the best set-up for a smartphone-based survey. We base our analysis on a random sample of Danish...

  3. Annual Survey of Significant Developments in General Economic Theory

    NARCIS (Netherlands)

    J. Tinbergen (Jan)

    1934-01-01

    textabstractThis survey may be opened with some apologetic remarks. The first is that to write a complete survey would mean to write a book. This has not been the intention of the editor, nor does it lie within the power of the present writer. Therefore, this survey is, in principle, incomplete, as

  4. Development of a competency mapping tool for undergraduate professional degree programmes, using mechanical engineering as a case study

    Science.gov (United States)

    Holmes, David W.; Sheehan, Madoc; Birks, Melanie; Smithson, John

    2018-01-01

    Mapping the curriculum of a professional degree to the associated competency standard ensures graduates have the competence to perform as professionals. Existing approaches to competence mapping vary greatly in depth, complexity, and effectiveness, and a standardised approach remains elusive. This paper describes a new mapping software tool that streamlines and standardises the competency mapping process. The available analytics facilitate ongoing programme review, management, and accreditation. The complete mapping and analysis of an Australian mechanical engineering degree programme is described as a case study. Each subject is mapped by evaluating the amount and depth of competence development present. Combining subject results then enables highly detailed programme level analysis. The mapping process is designed to be administratively light, with aspects of professional development embedded in the software. The effective competence mapping described in this paper enables quantification of learning within a professional degree programme, and provides a mechanism for holistic programme improvement.

  5. Understanding the development of human bladder cancer by using a whole-organ genomic mapping strategy.

    Science.gov (United States)

    Majewski, Tadeusz; Lee, Sangkyou; Jeong, Joon; Yoon, Dong-Sup; Kram, Andrzej; Kim, Mi-Sook; Tuziak, Tomasz; Bondaruk, Jolanta; Lee, Sooyong; Park, Weon-Seo; Tang, Kuang S; Chung, Woonbok; Shen, Lanlan; Ahmed, Saira S; Johnston, Dennis A; Grossman, H Barton; Dinney, Colin P; Zhou, Jain-Hua; Harris, R Alan; Snyder, Carrie; Filipek, Slawomir; Narod, Steven A; Watson, Patrice; Lynch, Henry T; Gazdar, Adi; Bar-Eli, Menashe; Wu, Xifeng F; McConkey, David J; Baggerly, Keith; Issa, Jean-Pierre; Benedict, William F; Scherer, Steven E; Czerniak, Bogdan

    2008-07-01

    The search for the genomic sequences involved in human cancers can be greatly facilitated by maps of genomic imbalances identifying the involved chromosomal regions, particularly those that participate in the development of occult preneoplastic conditions that progress to clinically aggressive invasive cancer. The integration of such regions with human genome sequence variation may provide valuable clues about their overall structure and gene content. By extension, such knowledge may help us understand the underlying genetic components involved in the initiation and progression of these cancers. We describe the development of a genome-wide map of human bladder cancer that tracks its progression from in situ precursor conditions to invasive disease. Testing for allelic losses using a genome-wide panel of 787 microsatellite markers was performed on multiple DNA samples, extracted from the entire mucosal surface of the bladder and corresponding to normal urothelium, in situ preneoplastic lesions, and invasive carcinoma. Using this approach, we matched the clonal allelic losses in distinct chromosomal regions to specific phases of bladder neoplasia and produced a detailed genetic map of bladder cancer development. These analyses revealed three major waves of genetic changes associated with growth advantages of successive clones and reflecting a stepwise conversion of normal urothelial cells into cancer cells. The genetic changes map to six regions at 3q22-q24, 5q22-q31, 9q21-q22, 10q26, 13q14, and 17p13, which may represent critical hits driving the development of bladder cancer. Finally, we performed high-resolution mapping using single nucleotide polymorphism markers within one region on chromosome 13q14, containing the model tumor suppressor gene RB1, and defined a minimal deleted region associated with clonal expansion of in situ neoplasia. These analyses provided new insights on the involvement of several non-coding sequences mapping to the region and identified

  6. Developing Land Use Land Cover Maps for the Lower Mekong Basin to Aid SWAT Hydrologic Modeling

    Science.gov (United States)

    Spruce, J.; Bolten, J. D.; Srinivasan, R.

    2017-12-01

    This presentation discusses research to develop Land Use Land Cover (LULC) maps for the Lower Mekong Basin (LMB). Funded by a NASA ROSES Disasters grant, the main objective was to produce updated LULC maps to aid the Mekong River Commission's (MRC's) Soil and Water Assessment Tool (SWAT) hydrologic model. In producing needed LULC maps, temporally processed MODIS monthly NDVI data for 2010 were used as the primary data source for classifying regionally prominent forest and agricultural types. The MODIS NDVI data was derived from processing MOD09 and MYD09 8-day reflectance data with the Time Series Product Tool, a custom software package. Circa 2010 Landsat multispectral data from the dry season were processed into top of atmosphere reflectance mosaics and then classified to derive certain locally common LULC types, such as urban areas and industrial forest plantations. Unsupervised ISODATA clustering was used to derive most LULC classifications. GIS techniques were used to merge MODIS and Landsat classifications into final LULC maps for Sub-Basins (SBs) 1-8 of the LMB. The final LULC maps were produced at 250-meter resolution and delivered to the MRC for use in SWAT modeling for the LMB. A map accuracy assessment was performed for the SB 7 LULC map with 14 classes. This assessment was performed by comparing random locations for sampled LULC types to geospatial reference data such as Landsat RGBs, MODIS NDVI phenologic profiles, high resolution satellite data from Google Map/Earth, and other reference data from the MRC (e.g., crop calendars). LULC accuracy assessment results for SB 7 indicated an overall agreement to reference data of 81% at full scheme specificity. However, by grouping 3 deciduous forest classes into 1 class, the overall agreement improved to 87%. The project enabled updated LULC maps, plus more specific rice types were classified compared to the previous LULC maps. The LULC maps from this project should improve the use of SWAT for modeling

  7. Disruption of Transient Serotonin Accumulation by Non-Serotonin-Producing Neurons Impairs Cortical Map Development

    Directory of Open Access Journals (Sweden)

    Xiaoning Chen

    2015-01-01

    Full Text Available Polymorphisms that alter serotonin transporter SERT expression and functionality increase the risks for autism and psychiatric traits. Here, we investigate how SERT controls serotonin signaling in developing CNS in mice. SERT is transiently expressed in specific sets of glutamatergic neurons and uptakes extrasynaptic serotonin during perinatal CNS development. We show that SERT expression in glutamatergic thalamocortical axons (TCAs dictates sensory map architecture. Knockout of SERT in TCAs causes lasting alterations in TCA patterning, spatial organizations of cortical neurons, and dendritic arborization in sensory cortex. Pharmacological reduction of serotonin synthesis during the first postnatal week rescues sensory maps in SERTGluΔ mice. Furthermore, knockdown of SERT expression in serotonin-producing neurons does not impair barrel maps. We propose that spatiotemporal SERT expression in non-serotonin-producing neurons represents a determinant in early life genetic programming of cortical circuits. Perturbing this SERT function could be involved in the origin of sensory and cognitive deficits associated with neurodevelopmental disorders.

  8. The Use of Cognitive Maps for Requirements Elicitation in Product Development

    Directory of Open Access Journals (Sweden)

    Raquel Dias

    2016-04-01

    Full Text Available This article approaches Engineering Requirements concepts and proposes the use of cognitive maps as support to the problem identification of the stakeholders during the requirements elicitation process. It presents a case study of the aerospace cluster of São José dos Campos, State of São Paulo. The cognitive map technique was developed to represent the views of the individuals, generating cognitive maps, which, in an aggregated way, express graphically the collective vision to support the decision-making process. Applied to Engineering Requirements, it has revealed the potential to promote the convergence of different points of view on the actual stakeholders’ needs in innovative fashion. This technique has demonstrated effectiveness when approaching the stated requirements early in the development process implemented throughout the life cycle of the system/product.

  9. A survey of oil product demand elasticities for developing countries

    International Nuclear Information System (INIS)

    Dahl, Carol

    1994-01-01

    As more and more developing countries join the ranks of the rich they will consume both more oil and higher percentage of the lighter products. To satisfy this growing demand oil production and refinery capacity that can provide the right quantity and mix of products must be developed. In a companion piece, Dahl (1993) found the total demand for oil to be price inelastic (-0.34) and income elastic (1.32) These elasticities can give information on the total quantity of oil that might be demanded, the total amount of distillation capacity that might be needed and the overall increases in product prices that might be necessary to choke off demand growth. However, with this overall growth in product demand, the more the shift towards the lighter portion of the barrel, the more complex the refinery and the greater the demand for downstream capital. To provide information on this mix in developing countries in the coming years, this paper surveys the available work on econometric demand elasticities by oil product. (author)

  10. Survey of renewable energy utilization and development potential in Oceania

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper reports fiscal 2000 survey of renewable energy utilization and development potential in Oceania. In Australia and New Zealand, renewable energy has already fairly been used. In Australia, it is promoted on the government policy level, with cost reduction and improved reliability in progress. The growth of 2% is set as a target in the year 2010. Promising are biomass and wind, while contributory in the long run are photovoltaic energies. New installations of hydraulic power generation are few, but potential is high for mini hydraulic power generation. Social interest is also comparatively high in renewable energies and greenhouse effect gas. However, further technological development is necessary for a full-scale contribution to global environmental problems. The situation in other south Pacific nations depends on their policy, economic condition and level of industrialization; each country heavily imports diesel oil for power generation, is under-developed industry-wise, and is a low income nation. The countries are desperately in need of foreign investment for the purpose of solving these problems. (NEDO)

  11. Recent developments on CMOS MAPS for the SuperB Silicon Vertex Tracker

    Energy Technology Data Exchange (ETDEWEB)

    Rizzo, G., E-mail: rizzo@pi.infn.it [Università degli Studi di Pisa (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Pisa (Italy); Comott, D. [Università degli Studi di Bergamo (Italy); Manghisoni, M.; Re, V.; Traversi, G. [Università degli Studi di Bergamo (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Pavia (Italy); Fabbri, L.; Gabrielli, A. [Università degli Studi di Bologna (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Bologna (Italy); Giorgi, F.; Pellegrini, G.; Sbarra, C. [Istituto Nazionale di Fisica Nucleare, Sezione di Bologna (Italy); Semprini-Cesari, N.; Valentinetti, S.; Villa, M.; Zoccoli, A. [Università degli Studi di Bologna (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Bologna (Italy); Berra, A.; Lietti, D.; Prest, M. [Università dell' Insubria, Como (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Milano Bicocca (Italy); Bevan, A. [School of Physics and Astronomy, Queen Mary, University of London, London E1 4NS (United Kingdom); Wilson, F. [STFC, Rutherford Appleton Laboratory, Harwell Oxford, Didcot OX11 0QX (United Kingdom); Beck, G. [School of Physics and Astronomy, Queen Mary, University of London, London E1 4NS (United Kingdom); and others

    2013-08-01

    In the design of the Silicon Vertex Tracker for the high luminosity SuperB collider, very challenging requirements are set by physics and background conditions on its innermost Layer0: small radius (about 1.5 cm), resolution of 10–15μm in both coordinates, low material budget <1%X{sub 0}, and the ability to withstand a background hit rate of several tens of MHz/cm{sup 2}. Thanks to an intense R and D program the development of Deep NWell CMOS MAPS (with the ST Microelectronics 130 nm process) has reached a good level of maturity and allowed for the first time the implementation of thin CMOS sensors with similar functionalities as in hybrid pixels, such as pixel-level sparsification and fast time stamping. Further MAPS performance improvements are currently under investigation with two different approaches: the INMAPS CMOS process, featuring a quadruple well and a high resistivity substrate, and 3D CMOS MAPS, realized with vertical integration technology. In both cases specific features of the processes chosen can improve charge collection efficiency, with respect to a standard DNW MAPS design, and allow to implement a more complex in-pixel logic in order to develop a faster readout architecture. Prototypes of MAPS matrix, suitable for application in the SuperB Layer0, have been realized with the INMAPS 180 nm process and the 130 nm Chartered/Tezzaron 3D process and results of their characterization will be presented in this paper.

  12. THE APPLICATION OF TYPOLOGY METHOD IN HISTORICAL BUILDING INFORMATION MODELLING (HBIM TAKING THE INFORMATION SURVEYING AND MAPPING OF JIAYUGUAN FORTRESS TOWN AS AN EXAMPLE

    Directory of Open Access Journals (Sweden)

    D. Y. Li

    2017-08-01

    Full Text Available With the promotion of fine degree of the heritage building surveying and mapping, building information modelling technology(BIM begins to be used in surveying and mapping, renovation, recording and research of heritage building, called historical building information modelling(HBIM. The hierarchical frameworks of parametric component library of BIM, belonging to the same type with the same parameters, has the same internal logic with archaeological typology which is more and more popular in the age identification of ancient buildings. Compared with the common materials, 2D drawings and photos, typology with HBIM has two advantages — (1 comprehensive building information both in collection and representation and (2 uniform and reasonable classification criteria This paper will take the information surveying and mapping of Jiayuguan Fortress Town as an example to introduce the field work method of information surveying and mapping based on HBIM technology and the construction of Revit family library.And then in order to prove the feasibility and advantage of HBIM technology used in typology method, this paper will identify the age of Guanghua gate tower, Rouyuan gate tower, Wenchang pavilion and the theater building of Jiayuguan Fortress Town with HBIM technology and typology method.

  13. The Application of Typology Method in Historical Building Information Modelling (hbim) Taking the Information Surveying and Mapping of Jiayuguan Fortress Town as AN Example

    Science.gov (United States)

    Li, D. Y.; Li, K.; Wu, C.

    2017-08-01

    With the promotion of fine degree of the heritage building surveying and mapping, building information modelling technology(BIM) begins to be used in surveying and mapping, renovation, recording and research of heritage building, called historical building information modelling(HBIM). The hierarchical frameworks of parametric component library of BIM, belonging to the same type with the same parameters, has the same internal logic with archaeological typology which is more and more popular in the age identification of ancient buildings. Compared with the common materials, 2D drawings and photos, typology with HBIM has two advantages — (1) comprehensive building information both in collection and representation and (2) uniform and reasonable classification criteria This paper will take the information surveying and mapping of Jiayuguan Fortress Town as an example to introduce the field work method of information surveying and mapping based on HBIM technology and the construction of Revit family library.And then in order to prove the feasibility and advantage of HBIM technology used in typology method, this paper will identify the age of Guanghua gate tower, Rouyuan gate tower, Wenchang pavilion and the theater building of Jiayuguan Fortress Town with HBIM technology and typology method.

  14. Mapping hardwood mortality for the early detection of P. ramorum: an assessment of aerial surveys and object-oriented image analysis

    Science.gov (United States)

    Erik Haunreiter; Zhanfeng Liu; Jeff Mai; Zachary Heath; Lisa Fischer

    2008-01-01

    Effective monitoring and identification of areas of hardwood mortality is a critical component in the management of sudden oak death (SOD). From 2001 to 2005, aerial surveys covering 13.5 million acres in California were conducted to map and monitor hardwood mortality for the early detection of Phytophthora ramorum, the pathogen responsible for SOD....

  15. Three-dimensional mapping of salt load in the Murray-Darling Basin, 1 Steps in calibration of airborne electromagnetic surveys

    NARCIS (Netherlands)

    Cresswell, R.G.; Dent, D.L.; Jones, G.; Galloway, D.

    2004-01-01

    An airborne electromagnetic survey yields a three-dimensional map of ground electrical conductivity. The remotely sensed data are translated into salt load by field and laboratory calibration: drilling, measurement of borehole conductivity, electrical conductivity of 1 : 5 soil¿water extracts

  16. INDUSTRY PARTNERSHIPS LEARNING MODELS FOR SURVEYING AND MAPPING OF VOCATIONAL HIGH SCHOOLS

    Directory of Open Access Journals (Sweden)

    Sunar Rochmadi

    2016-09-01

    Full Text Available This study aims to identify a learning involving the world of work, to formulate the learning model, and to evaluate the learning model. This study used a qualitative approach for design and development research, consisting of the development and validation steps. The study concludes as follows. (1 the learning through partnerships having been conducted in all vocational high schools were industrial practice and vocational practice examination. (2 the constraints of learning through partnerships were mainly the far distance and the industry schedules that did not always match with the school’s. (3 the model development could be done by improving the learning quality by industrial practices in the private companies and with adding the learning model by industry visits, guest teaching, and up-to-date technology training. (4 the implementation of the developed model showed the feasibility and the effectiveness to prepare the students with the competencies required by the world of work. (5 the learning models through partnerships that could be practiced were guest teaching, orientation for industrial practice, industrial practices, students’ industry visits, up-to-date technology training, and vocational practice examination.

  17. Developing a spatial-statistical model and map of historical malaria prevalence in Botswana using a staged variable selection procedure

    Directory of Open Access Journals (Sweden)

    Mabaso Musawenkosi LH

    2007-09-01

    Full Text Available Abstract Background Several malaria risk maps have been developed in recent years, many from the prevalence of infection data collated by the MARA (Mapping Malaria Risk in Africa project, and using various environmental data sets as predictors. Variable selection is a major obstacle due to analytical problems caused by over-fitting, confounding and non-independence in the data. Testing and comparing every combination of explanatory variables in a Bayesian spatial framework remains unfeasible for most researchers. The aim of this study was to develop a malaria risk map using a systematic and practicable variable selection process for spatial analysis and mapping of historical malaria risk in Botswana. Results Of 50 potential explanatory variables from eight environmental data themes, 42 were significantly associated with malaria prevalence in univariate logistic regression and were ranked by the Akaike Information Criterion. Those correlated with higher-ranking relatives of the same environmental theme, were temporarily excluded. The remaining 14 candidates were ranked by selection frequency after running automated step-wise selection procedures on 1000 bootstrap samples drawn from the data. A non-spatial multiple-variable model was developed through step-wise inclusion in order of selection frequency. Previously excluded variables were then re-evaluated for inclusion, using further step-wise bootstrap procedures, resulting in the exclusion of another variable. Finally a Bayesian geo-statistical model using Markov Chain Monte Carlo simulation was fitted to the data, resulting in a final model of three predictor variables, namely summer rainfall, mean annual temperature and altitude. Each was independently and significantly associated with malaria prevalence after allowing for spatial correlation. This model was used to predict malaria prevalence at unobserved locations, producing a smooth risk map for the whole country. Conclusion We have

  18. Vocabulary Development in European Portuguese: A Replication Study Using the Language Development Survey

    Science.gov (United States)

    Rescorla, Leslie; Nyame, Josephine; Dias, Pedro

    2016-01-01

    Purpose: Our objective was to replicate previous cross­linguistic findings by comparing Portuguese and U.S. children with respect to (a) effects of language, gender, and age on vocabulary size; (b) lexical composition; and (c) late talking. Method: We used the Language Development Survey (LDS; Rescorla, 1989) with children (18-35 months) learning…

  19. The Green Bank Ammonia Survey: First Results of NH3 Mapping of the Gould Belt

    Science.gov (United States)

    Friesen, Rachel K.; Pineda, Jaime E.; co-PIs; Rosolowsky, Erik; Alves, Felipe; Chacón-Tanarro, Ana; How-Huan Chen, Hope; Chun-Yuan Chen, Michael; Di Francesco, James; Keown, Jared; Kirk, Helen; Punanova, Anna; Seo, Youngmin; Shirley, Yancy; Ginsburg, Adam; Hall, Christine; Offner, Stella S. R.; Singh, Ayushi; Arce, Héctor G.; Caselli, Paola; Goodman, Alyssa A.; Martin, Peter G.; Matzner, Christopher; Myers, Philip C.; Redaelli, Elena; The GAS Collaboration

    2017-07-01

    We present an overview of the first data release (DR1) and first-look science from the Green Bank Ammonia Survey (GAS). GAS is a Large Program at the Green Bank Telescope to map all Gould Belt star-forming regions with {A}{{V}}≳ 7 mag visible from the northern hemisphere in emission from NH3 and other key molecular tracers. This first release includes the data for four regions in the Gould Belt clouds: B18 in Taurus, NGC 1333 in Perseus, L1688 in Ophiuchus, and Orion A North in Orion. We compare the NH3 emission to dust continuum emission from Herschel and find that the two tracers correspond closely. We find that NH3 is present in over 60% of the lines of sight with {A}{{V}}≳ 7 mag in three of the four DR1 regions, in agreement with expectations from previous observations. The sole exception is B18, where NH3 is detected toward ∼40% of the lines of sight with {A}{{V}}≳ 7 mag. Moreover, we find that the NH3 emission is generally extended beyond the typical 0.1 pc length scales of dense cores. We produce maps of the gas kinematics, temperature, and NH3 column densities through forward modeling of the hyperfine structure of the NH3 (1, 1) and (2, 2) lines. We show that the NH3 velocity dispersion, {σ }v, and gas kinetic temperature, T K, vary systematically between the regions included in this release, with an increase in both the mean value and the spread of {σ }v and T K with increasing star formation activity. The data presented in this paper are publicly available (https://dataverse.harvard.edu/dataverse/GAS_DR1).

  20. Barriers to global health development: An international quantitative survey.

    Directory of Open Access Journals (Sweden)

    Bahr Weiss

    Full Text Available Global health's goal of reducing low-and-middle-income country versus high-income country health disparities faces complex challenges. Although there have been discussions of barriers, there has not been a broad-based, quantitative survey of such barriers.432 global health professionals were invited via email to participate in an online survey, with 268 (62% participating. The survey assessed participants' (A demographic and global health background, (B perceptions regarding 66 barriers' seriousness, (C detailed ratings of barriers designated most serious, (D potential solutions.Thirty-four (of 66 barriers were seen as moderately or more serious, highlighting the widespread, significant challenges global health development faces. Perceived barrier seriousness differed significantly across domains: Resource Limitations mean = 2.47 (0-4 Likert scale, Priority Selection mean = 2.20, Corruption, Lack of Competence mean = 1.87, Social and Cultural Barriers mean = 1.68. Some system-level predictors showed significant but relatively limited relations. For instance, for Global Health Domain, HIV and Mental Health had higher levels of perceived Social and Cultural Barriers than other GH Domains. Individual-level global health experience predictors had small but significant effects, with seriousness of (a Corruption, Lack of Competence, and (b Priority Selection barriers positively correlated with respondents' level of LMIC-oriented (e.g., weeks/year spent in LMIC but Academic Global Health Achievement (e.g., number of global health publications negatively correlated with overall barrier seriousness.That comparatively few system-level predictors (e.g., Organization Type were significant suggests these barriers may be relatively fundamental at the system-level. Individual-level and system-level effects do have policy implications; e.g., Priority Selection barriers were among the most serious, yet effects on seriousness of how LMIC-oriented a professional

  1. Intervention mapping: a process for developing theory- and evidence-based health education programs.

    Science.gov (United States)

    Bartholomew, L K; Parcel, G S; Kok, G

    1998-10-01

    The practice of health education involves three major program-planning activities: needs assessment, program development, and evaluation. Over the past 20 years, significant enhancements have been made to the conceptual base and practice of health education. Models that outline explicit procedures and detailed conceptualization of community assessment and evaluation have been developed. Other advancements include the application of theory to health education and promotion program development and implementation. However, there remains a need for more explicit specification of the processes by which one uses theory and empirical findings to develop interventions. This article presents the origins, purpose, and description of Intervention Mapping, a framework for health education intervention development. Intervention Mapping is composed of five steps: (1) creating a matrix of proximal program objectives, (2) selecting theory-based intervention methods and practical strategies, (3) designing and organizing a program, (4) specifying adoption and implementation plans, and (5) generating program evaluation plans.

  2. Mapping of Student Sustainable Development Education Knowledge in Malaysia Using Geographical Information System (GIS)

    Science.gov (United States)

    Mahat, Hanifah; Hashim, Mohmadisa; Nayan, Nasir; Saleh, Yazid; Norkhaidi, Saiyidatina Balkhis

    2018-01-01

    This article aims to examine the levels of education for sustainable development (ESD) knowledge among students in secondary schools according to zones in Malaysia by using GIS mapping. The five main zones of the study were the north zone, the south zone, the east coast zone, the central zone, and the East Malaysia zone. This quantitative form of…

  3. A Mapping Study on Cooperation between Information System Development and Operations

    NARCIS (Netherlands)

    Erich, Floris; Amrit, Chintan Amrit; Daneva, Maia; Jedlitschka, Andreas; Kuvaja, Pasi; Kuhrmann, Marco; Männistö, Tomi; Münch, Jürgen; Raatikainen, Mikko

    2014-01-01

    DevOps is a conceptual framework for reintegrating development and operations of Information Systems.We performed a Systematic Mapping Study to explore DevOps. 26 articles out of 139 were selected, studied and summarized. Based on this a concept table was constructed. We discovered that DevOps has

  4. Mapping network development of international new ventures with the use of company e-mails

    NARCIS (Netherlands)

    Wakkee, I.A.M.

    2006-01-01

    International new ventures use e-mail frequently to communicate with globally dispersed contacts. In this paper we present and discuss a qualitative research method to map international network development based on company e-mails. Our approach also allows for combinations of inductive and deductive

  5. Development of aerial gamma radiation survey system, 4

    International Nuclear Information System (INIS)

    Saito, Kimiaki; Nagaoka, Toshi; Sakamoto, Ryuichi; Tsutsumi, Masahiro; Moriuchi, Shigeru

    1985-02-01

    Field experiments have been performed by JAERI since 1982 to obtain fundamental data required for development of aerial radiation survey system. In order to supplement the fundamental radiation data, theoretical calculations have been carried out. The utilized Monte Carlo transport program was verified by simulative calculations of the field experiments, and characteristics data on environmental gamma rays have been accumulated. In this report, the field experiments in 1981 and 1982 were simulated making use of the Monte Carlo transport calculation code YURI developed in JAERI. Comparisons were made between experimental and calculated results for exposure rate and flux density originated from terrestrial sources, and from a point source at height of 2.5 m above the ground. Good agreements between the data verified the transport program. As fundamental characteristics data on environmental gamma rays, spatial distributions of exposure, fluence, energy spectra, angular spectra and average energy were reported and discussed, for terrestrial sources of 40 K, 232 Th-series and 238 U-series, for a plane source on the ground and for a point source at 2.5 m above the ground. (author)

  6. The Use of Intervention Mapping to Develop a Tailored Web-Based Intervention, Condom-HIM.

    Science.gov (United States)

    Miranda, Joyal; Côté, José

    2017-04-19

    Many HIV (human immunodeficiency virus) prevention interventions are currently being implemented and evaluated, with little information published on their development. A framework highlighting the method of development of an intervention can be used by others wanting to replicate interventions or develop similar interventions to suit other contexts and settings. It provides researchers with a comprehensive development process of the intervention. The objective of this paper was to describe how a systematic approach, intervention mapping, was used to develop a tailored Web-based intervention to increase condom use among HIV-positive men who have sex with men. The intervention was developed in consultation with a multidisciplinary team composed of academic researchers, community members, Web designers, and the target population. Intervention mapping involved a systematic process of 6 steps: (1) needs assessment; (2) identification of proximal intervention objectives; (3) selection of theory-based intervention methods and practical strategies; (4) development of intervention components and materials; (5) adoption, implementation, and maintenance; and (6) evaluation planning. The application of intervention mapping resulted in the development of a tailored Web-based intervention for HIV-positive men who have sex with men, called Condom-HIM. Using intervention mapping as a systematic process to develop interventions is a feasible approach that specifically integrates the use of theory and empirical findings. Outlining the process used to develop a particular intervention provides clarification on the conceptual use of experimental interventions in addition to potentially identifying reasons for intervention failures. ©Joyal Miranda, José Côté. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 19.04.2017.

  7. Development of admixture mapping panels for African Americans from commercial high-density SNP arrays

    Directory of Open Access Journals (Sweden)

    Dunston Georgia M

    2010-07-01

    Full Text Available Abstract Background Admixture mapping is a powerful approach for identifying genetic variants involved in human disease that exploits the unique genomic structure in recently admixed populations. To use existing published panels of ancestry-informative markers (AIMs for admixture mapping, markers have to be genotyped de novo for each admixed study sample and samples representing the ancestral parental populations. The increased availability of dense marker data on commercial chips has made it feasible to develop panels wherein the markers need not be predetermined. Results We developed two panels of AIMs (~2,000 markers each based on the Affymetrix Genome-Wide Human SNP Array 6.0 for admixture mapping with African American samples. These two AIM panels had good map power that was higher than that of a denser panel of ~20,000 random markers as well as other published panels of AIMs. As a test case, we applied the panels in an admixture mapping study of hypertension in African Americans in the Washington, D.C. metropolitan area. Conclusions Developing marker panels for admixture mapping from existing genome-wide genotype data offers two major advantages: (1 no de novo genotyping needs to be done, thereby saving costs, and (2 markers can be filtered for various quality measures and replacement markers (to minimize gaps can be selected at no additional cost. Panels of carefully selected AIMs have two major advantages over panels of random markers: (1 the map power from sparser panels of AIMs is higher than that of ~10-fold denser panels of random markers, and (2 clusters can be labeled based on information from the parental populations. With current technology, chip-based genome-wide genotyping is less expensive than genotyping ~20,000 random markers. The major advantage of using random markers is the absence of ascertainment effects resulting from the process of selecting markers. The ability to develop marker panels informative for ancestry from

  8. Technological Implementation of Renewable Energy in Rural-Isolated Areas and Small-Medium Islands in Indonesia: Problem Mapping And Preliminary Surveys of Total People Participation in a Local Wind Pump Water Supply

    Science.gov (United States)

    Taufik, Ahmad

    2007-10-01

    This article discusses a formulation of problem mapping and preliminary surveys of total people participation in a local wind pump (LWP) water supply in term of technological implementation of renewable energy (RE) in rural-isolated areas and small-medium islands in Indonesia. The formulation was constructed in order to enhance and to promote the local product of RE across Indonesia. It was also addressed to accommodate local potencies, barriers and opportunities into a priority map. Moreover, it was designed into five aspects such as (1) local technology of the RE: a case of pilot project of the LWP; (2) environmental-cultural aspects related to global issues of energy-renewable energy; (3) potencies and barriers corresponding to local, national, regional and international contents; (4) education and training and (5) gender participation. To focus the formulation, serial preliminary surveys were conducted in five major areas, namely: (1) survey on support and barrier factors of the aspects; (2) strategic planning model, a concept A-B-G which stands for Academician-Business people-Government; (3) survey on background based knowledge on energy conservation; (4) survey on gender participation in energy conservation and (5) survey on local stakeholder involvement. Throughout the surveys, it has been notified that the concept needs to be developed to any level of its component since its elements were identified in tolerance values such as high potency value of the LWP development (95%); a strong potency of rural area application (88%); a medium background of energy, energy conservation (EC) identified in a range of 56%-72%, sufficient support from local stakeholders and gender participation.

  9. Possibility of Preparing Thematic Maps Through Developing of the Geographic Information System (GIS

    Directory of Open Access Journals (Sweden)

    Stjepan Husnjak

    2013-04-01

    Full Text Available It is a well known fact that nowadays planning of sustainable development and land use requires a lot of reliable and good quality information, which serves as the basis for timely and adequate decision-making. One of the most important forms of information is presented in various maps. Until recently, preparing of such data was, no doubt, a rather complex and time-consuming task. However, at present, thanks to, first of all, the GIS technology it is possible to develop corresponding geographic information systems with databases which then allow comparatively simple and quick preparing of necessary thematic maps. The paper first presents the method of developing the Geographic and Land Information System (GLIS of the Karlovac County which, although developed for the purpose of agricultural development, may also be used in the development of forestry, environment protection, physical planning, water management and for soil conservation and regulation. Several examples illustrate the possibilities of preparing of specialised maps based on this GLIS. The basic data for developing of the geographic and land information system were the data of the Basic Soil Maps and topographic maps of the Republic of Croatia at the scale of 1:50 000 or 1:25 000, and the data from other studies made for the purpose of agricultural development in the area. These data, together with the results of processing and analysing of this data, by digitalisation, generalisation and interpolation, were incorporated into an integrated database of the geographic and land information system by using Microstation, AutoCad, ArcInfo, ArcWiew and Access software and the corresponding hardware. GLIS database consists of two parts. The first part includes the data referring to polygons - pedological contours, and the other part the data on pedological profiles. The base is organised in a way that enable the preparation of different thematic maps, but it can be also used in digital form

  10. Development of a hand-held fast neutron survey meter

    International Nuclear Information System (INIS)

    Yoshida, T.; Tsujimura, N.; Yamano, T.

    2011-01-01

    A neutron survey meter with a ZnS(Ag) scintillator to measure recoil protons was built. The detection probe weighs ∼2 kg, therefore providing us with true portability. Performance tests exhibited satisfactory neutron dosimetry characteristics in unmoderated or lightly moderated fission neutron fields and in particular work environments at a mixed oxide fuel facility. This new survey meter will augment a routine of neutron monitoring that is inconveniently being carried out by moderator-based neutron survey meters. (authors)

  11. Molecular-cloud-scale Chemical Composition. II. Mapping Spectral Line Survey toward W3(OH) in the 3 mm Band

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Yuri [Institute of Astronomy, The University of Tokyo, 2-21-1, Osawa, Mitaka, Tokyo 181-0015 (Japan); Watanabe, Yoshimasa; Yamamoto, Satoshi [Department of Physics, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Harada, Nanase [Academia Sinica Institute of Astronomy and Astrophysics, No.1, Sec. 4, Roosevelt Road, 10617 Taipei, Taiwan, R.O.C. (China); Shimonishi, Takashi [Frontier Research Institute for Interdisciplinary Sciences, Tohoku University, Aramakiazaaoba 6-3, Aoba-ku, Sendai, Miyagi 980-8578 (Japan); Sakai, Nami [RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Aikawa, Yuri [Department of Astronomy, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Kawamura, Akiko [Chile Observatory, National Astronomical Observatory of Japan, 2-21-1, Osawa, Mitaka, Tokyo 181-8588 (Japan)

    2017-10-10

    To study a molecular-cloud-scale chemical composition, we conducted a mapping spectral line survey toward the Galactic molecular cloud W3(OH), which is one of the most active star-forming regions in the Perseus arm. We conducted our survey through the use of the Nobeyama Radio Observatory 45 m telescope, and observed the area of 16′ × 16′, which corresponds to 9.0 pc × 9.0 pc. The observed frequency ranges are 87–91, 96–103, and 108–112 GHz. We prepared the spectrum averaged over the observed area, in which eight molecular species (CCH, HCN, HCO{sup +}, HNC, CS, SO, C{sup 18}O, and {sup 13}CO) are identified. On the other hand, the spectrum of the W3(OH) hot core observed at a 0.17 pc resolution shows the lines of various molecules such as OCS, H{sub 2}CS CH{sub 3}CCH, and CH{sub 3}CN in addition to the above species. In the spatially averaged spectrum, emission of the species concentrated just around the star-forming core, such as CH{sub 3}OH and HC{sub 3}N, is fainter than in the hot core spectrum, whereas emission of the species widely extended over the cloud such as CCH is relatively brighter. We classified the observed area into five subregions according to the integrated intensity of {sup 13}CO, and evaluated the contribution to the averaged spectrum from each subregion. The CCH, HCN, HCO{sup +}, and CS lines can be seen even in the spectrum of the subregion with the lowest {sup 13}CO integrated intensity range (<10 K km s{sup −1}). Thus, the contributions of the spatially extended emission is confirmed to be dominant in the spatially averaged spectrum.

  12. DEVELOPMENT OF AN INTEGRATED AIR POLLUTION MAPS ON KEY PLOT OF KRASNOYARSK REGION

    Directory of Open Access Journals (Sweden)

    E. A. Bozhilina

    2016-01-01

    Full Text Available The paper suggested the construction of a comprehensive air pollution map as an example of the key area of the Krasnoyarsk Territory. To create a map developed an original technique for limiting emissions spread zones in the atmosphere from industrial plants near the cities on the basis of climatic data. The proposed method is based on taking into account the repeatability wind speed and direction and length of time of pollutants in the atmosphere. The used methods of cartographic representation – quantitative background (emissions per unit area within the zones of the potential spread of contaminants, localized diagrams (emissions and air pollution index for the city, contour lines (the value of air pollution potential. Using an integrated map allows you to specify the impact of the transfer of pollutants in the formation of the level of pollution in the city, together with the volumes and values of emissions of air pollution potential.

  13. Development of the geoCamera, a System for Mapping Ice from a Ship

    Science.gov (United States)

    Arsenault, R.; Clemente-Colon, P.

    2012-12-01

    The geoCamera produces maps of the ice surrounding an ice-capable ship by combining images from one or more digital cameras with the ship's position and attitude data. Maps are produced along the ship's path with the achievable width and resolution depending on camera mounting height as well as camera resolution and lens parameters. Our system has produced maps up to 2000m wide at 1m resolution. Once installed and calibrated, the system is designed to operate automatically producing maps in near real-time and making them available to on-board users via existing information systems. The resulting small-scale maps complement existing satellite based products as well as on-board observations. Development versions have temporarily been deployed in Antarctica on the RV Nathaniel B. Palmer in 2010 and in the Arctic on the USCGC Healy in 2011. A permanent system has been deployed during the summer of 2012 on the USCGC Healy. To make the system attractive to other ships of opportunity, design goals include using existing ship systems when practical, using low costs commercial-off-the-shelf components if additional hardware is necessary, automating the process to virtually eliminate adding to the workload of ships technicians and making the software components modular and flexible enough to allow more seamless integration with a ships particular IT system.

  14. DEVELOPING THE STABILIZED MAPPING SYSTEM FOR THE GYROCOPTER – REPORT FROM THE FIRST TESTS

    Directory of Open Access Journals (Sweden)

    J. Kolecki

    2016-06-01

    Full Text Available The LiDAR mapping carried out using gyrocopters provides a relatively cheap alternative for traditional mapping involving airplanes. The costs of the fuel and the overall maintenance are much lower when compared to planes. At the same time the flight kinematics of the gyrocopter makes it an ideal vehicle for corridor mapping. However a limited payload and a strongly limited space prevent using stabilized platforms dedicated for aerial photogrammetry. As the proper stabilization of the laser scanner during the flight is crucial in order to keep the desirable quality of the LiDAR data, it was decided to develop the prototype of the stabilized, ultra-light mapping platform that can meet the restricted requirements of the gyrocopter. The paper starts with the brief discussion of the legal and practical aspects of the LiDAR data quality, dealing mostly with the influence of the flight imperfections on the point pattern and point density. Afterwards the mapping system prototype is characterized, taking into account three main components: stabilized platform, sensors and control. Subsequently first in-flight tests are described. Though the data are still not perfect mostly due to vibrations, the stabilization provides a substantial improvement of their geometry, reducing both roll and pitch deflections.

  15. Using NDVI and guided sampling to develop yield prediction maps of processing tomato crop

    Energy Technology Data Exchange (ETDEWEB)

    Fortes, A.; Henar Prieto, M. del; García-Martín, A.; Córdoba, A.; Martínez, L.; Campillo, C.

    2015-07-01

    The use of yield prediction maps is an important tool for the delineation of within-field management zones. Vegetation indices based on crop reflectance are of potential use in the attainment of this objective. There are different types of vegetation indices based on crop reflectance, the most commonly used of which is the NDVI (normalized difference vegetation index). NDVI values are reported to have good correlation with several vegetation parameters including the ability to predict yield. The field research was conducted in two commercial farms of processing tomato crop, Cantillana and Enviciados. An NDVI prediction map developed through ordinary kriging technique was used for guided sampling of processing tomato yield. Yield was studied and related with NDVI, and finally a prediction map of crop yield for the entire plot was generated using two geostatistical methodologies (ordinary and regression kriging). Finally, a comparison was made between the yield obtained at validation points and the yield values according to the prediction maps. The most precise yield maps were obtained with the regression kriging methodology with RRMSE values of 14% and 17% in Cantillana and Enviciados, respectively, using the NDVI as predictor. The coefficient of correlation between NDVI and yield was correlated in the point samples taken in the two locations, with values of 0.71 and 0.67 in Cantillana and Enviciados, respectively. The results suggest that the use of a massive sampling parameter such as NDVI is a good indicator of the distribution of within-field yield variation. (Author)

  16. Development of Rapid and Low Cost Archaeological Site Mapping Using Photogrammetric Technique

    International Nuclear Information System (INIS)

    Azhar, N A Mohd; Ahmad, Anuar

    2014-01-01

    In digital photogrammetry, unmanned aerial vehicle (UAV) platform is a new technology that can be used to capture digital images for large scale mapping with accuracy down to centimeter level from various waypoints for archaeological site documentation. UAV is one of the great alternatives to replace piloted aircraft and with combination of non -metric camera, thus it can be applied for small area such as cultural heritage building/ archeological site area. With the recent technology of non-metric cameras, this camera is capable of producing high resolution digital images. This study investigates the application of UAV images for documentation and mapping of a simulated archaeological sites. An archaeological site simulation modelwith dimension of 2.4 m × 3.5 m is used in this study. The accuracy for mapping the archeological sites based on the UAV system is evaluated and analyzed by performing the Root Mean Square Error (RMSE) derived from the differences of coordinates between reference value and the coordinates observed from photogrammetric output such as digital terrain model and orthophoto. In this application, a simulation model was used to simulate the archaeological site excavation. The results clearly demonstrate the potential and the capability of UAV and non-metric camera in providing the accuracy of centimetre level for this application. From this study, it can be concluded that the UAV and the photogrammetric technique procedure satisfied the needs of archaeological sites survey and documentation

  17. Mapping snow depth in complex alpine terrain with close range aerial imagery - estimating the spatial uncertainties of repeat autonomous aerial surveys over an active rock glacier

    Science.gov (United States)

    Goetz, Jason; Marcer, Marco; Bodin, Xavier; Brenning, Alexander

    2017-04-01

    Snow depth mapping in open areas using close range aerial imagery is just one of the many cases where developments in structure-from-motion and multi-view-stereo (SfM-MVS) 3D reconstruction techniques have been applied for geosciences - and with good reason. Our ability to increase the spatial resolution and frequency of observations may allow us to improve our understanding of how snow depth distribution varies through space and time. However, to ensure accurate snow depth observations from close range sensing we must adequately characterize the uncertainty related to our measurement techniques. In this study, we explore the spatial uncertainties of snow elevation models for estimation of snow depth in a complex alpine terrain from close range aerial imagery. We accomplish this by conducting repeat autonomous aerial surveys over a snow-covered active-rock glacier located in the French Alps. The imagery obtained from each flight of an unmanned aerial vehicle (UAV) is used to create an individual digital elevation model (DEM) of the snow surface. As result, we obtain multiple DEMs of the snow surface for the same site. These DEMs are obtained from processing the imagery with the photogrammetry software Agisoft Photoscan. The elevation models are also georeferenced within Photoscan using the geotagged imagery from an onboard GNSS in combination with ground targets placed around the rock glacier, which have been surveyed with highly accurate RTK-GNSS equipment. The random error associated with multi-temporal DEMs of the snow surface is estimated from the repeat aerial survey data. The multiple flights are designed to follow the same flight path and altitude above the ground to simulate the optimal conditions of repeat survey of the site, and thus try to estimate the maximum precision associated with our snow-elevation measurement technique. The bias of the DEMs is assessed with RTK-GNSS survey observations of the snow surface elevation of the area on and surrounding

  18. Geographical inequalities in use of improved drinking water supply and sanitation across Sub-Saharan Africa: mapping and spatial analysis of cross-sectional survey data.

    Directory of Open Access Journals (Sweden)

    Rachel L Pullan

    2014-04-01

    Full Text Available Understanding geographic inequalities in coverage of drinking-water supply and sanitation (WSS will help track progress towards universal coverage of water and sanitation by identifying marginalized populations, thus helping to control a large number of infectious diseases. This paper uses household survey data to develop comprehensive maps of WSS coverage at high spatial resolution for sub-Saharan Africa (SSA. Analysis is extended to investigate geographic heterogeneity and relative geographic inequality within countries.Cluster-level data on household reported use of improved drinking-water supply, sanitation, and open defecation were abstracted from 138 national surveys undertaken from 1991-2012 in 41 countries. Spatially explicit logistic regression models were developed and fitted within a Bayesian framework, and used to predict coverage at the second administrative level (admin2, e.g., district across SSA for 2012. Results reveal substantial geographical inequalities in predicted use of water and sanitation that exceed urban-rural disparities. The average range in coverage seen between admin2 within countries was 55% for improved drinking water, 54% for use of improved sanitation, and 59% for dependence upon open defecation. There was also some evidence that countries with higher levels of inequality relative to coverage in use of an improved drinking-water source also experienced higher levels of inequality in use of improved sanitation (rural populations r = 0.47, p = 0.002; urban populations r = 0.39, p = 0.01. Results are limited by the quantity of WSS data available, which varies considerably by country, and by the reliability and utility of available indicators.This study identifies important geographic inequalities in use of WSS previously hidden within national statistics, confirming the necessity for targeted policies and metrics that reach the most marginalized populations. The presented maps and analysis approach

  19. Geographical Inequalities in Use of Improved Drinking Water Supply and Sanitation across Sub-Saharan Africa: Mapping and Spatial Analysis of Cross-sectional Survey Data

    Science.gov (United States)

    Pullan, Rachel L.; Freeman, Matthew C.; Gething, Peter W.; Brooker, Simon J.

    2014-01-01

    Background Understanding geographic inequalities in coverage of drinking-water supply and sanitation (WSS) will help track progress towards universal coverage of water and sanitation by identifying marginalized populations, thus helping to control a large number of infectious diseases. This paper uses household survey data to develop comprehensive maps of WSS coverage at high spatial resolution for sub-Saharan Africa (SSA). Analysis is extended to investigate geographic heterogeneity and relative geographic inequality within countries. Methods and Findings Cluster-level data on household reported use of improved drinking-water supply, sanitation, and open defecation were abstracted from 138 national surveys undertaken from 1991–2012 in 41 countries. Spatially explicit logistic regression models were developed and fitted within a Bayesian framework, and used to predict coverage at the second administrative level (admin2, e.g., district) across SSA for 2012. Results reveal substantial geographical inequalities in predicted use of water and sanitation that exceed urban-rural disparities. The average range in coverage seen between admin2 within countries was 55% for improved drinking water, 54% for use of improved sanitation, and 59% for dependence upon open defecation. There was also some evidence that countries with higher levels of inequality relative to coverage in use of an improved drinking-water source also experienced higher levels of inequality in use of improved sanitation (rural populations r = 0.47, p = 0.002; urban populations r = 0.39, p = 0.01). Results are limited by the quantity of WSS data available, which varies considerably by country, and by the reliability and utility of available indicators. Conclusions This study identifies important geographic inequalities in use of WSS previously hidden within national statistics, confirming the necessity for targeted policies and metrics that reach the most marginalized populations. The

  20. Geographical inequalities in use of improved drinking water supply and sanitation across Sub-Saharan Africa: mapping and spatial analysis of cross-sectional survey data.

    Science.gov (United States)

    Pullan, Rachel L; Freeman, Matthew C; Gething, Peter W; Brooker, Simon J

    2014-04-01

    Understanding geographic inequalities in coverage of drinking-water supply and sanitation (WSS) will help track progress towards universal coverage of water and sanitation by identifying marginalized populations, thus helping to control a large number of infectious diseases. This paper uses household survey data to develop comprehensive maps of WSS coverage at high spatial resolution for sub-Saharan Africa (SSA). Analysis is extended to investigate geographic heterogeneity and relative geographic inequality within countries. Cluster-level data on household reported use of improved drinking-water supply, sanitation, and open defecation were abstracted from 138 national surveys undertaken from 1991-2012 in 41 countries. Spatially explicit logistic regression models were developed and fitted within a Bayesian framework, and used to predict coverage at the second administrative level (admin2, e.g., district) across SSA for 2012. Results reveal substantial geographical inequalities in predicted use of water and sanitation that exceed urban-rural disparities. The average range in coverage seen between admin2 within countries was 55% for improved drinking water, 54% for use of improved sanitation, and 59% for dependence upon open defecation. There was also some evidence that countries with higher levels of inequality relative to coverage in use of an improved drinking-water source also experienced higher levels of inequality in use of improved sanitation (rural populations r = 0.47, p = 0.002; urban populations r = 0.39, p = 0.01). Results are limited by the quantity of WSS data available, which varies considerably by country, and by the reliability and utility of available indicators. This study identifies important geographic inequalities in use of WSS previously hidden within national statistics, confirming the necessity for targeted policies and metrics that reach the most marginalized populations. The presented maps and analysis approach can provide a

  1. Treatment of AKI in developing and developed countries: An international survey of pediatric dialysis modalities.

    Directory of Open Access Journals (Sweden)

    Rupesh Raina

    Full Text Available Acute kidney injury (AKI is a common cause of morbidity and mortality worldwide, with a pediatric incidence ranging from 19.3% to 24.1%. Treatment of pediatric AKI is a source of debate in varying geographical regions. Currently CRRT is the treatment for pediatric AKI, but limitations due to cost and accessibility force use of adult equipment and other therapeutic options such as peritoneal dialysis (PD and hemodialysis (HD. It was hypothesized that more cost-effective measures would likely be used in developing countries due to lesser resource availability.A 26-question internet-based survey was distributed to 650 pediatric Nephrologists. There was a response rate of 34.3% (223 responses. The survey was distributed via pedneph and pcrrt email servers, inquiring about demographics, technology, resources, pediatric-specific supplies, and preference in renal replacement therapy (RRT in pediatric AKI. The main method of analysis was to compare responses about treatments between nephrologists in developed countries and nephrologists in developing countries using difference-of-proportions tests.PD was available in all centers surveyed, while HD was available in 85.1% and 54.1% (p = 0.00, CRRT was available in 60% and 33.3% (p = 0.001, and SLED was available in 20% and 25% (p = 0.45 centers of developed and developing world respectively. In developing countries, 68.5% (p = 0.000 of physicians preferred PD to costlier therapies, while in developed countries it was found that physicians favored HD (72%, p = 0.00 or CRRT (24%, p = 0.041 in infants.Lack of availability of resources, trained physicians and funds often preclude standards of care in developing countries, and there is much development needed in terms of meeting higher global standards for treating pediatric AKI patients. PD remains the main modality of choice for treatment of AKI in infants in developing world.

  2. Aerial radiometric and magnetic reconnaissance survey of the Delta Quadrangle, Utah. Volume 2. Maps, profiles, and histograms. Final report

    International Nuclear Information System (INIS)

    1978-11-01

    Results of the interpretation of the gamma-ray spectrometric data in the form of a preferred anomaly map, along with significance-factor profile maps, stacked profiles, and histograms are presented in Volume 2

  3. Proceedings of the U.S. Geological Survey Eighth Biennial Geographic Information Science Workshop and first The National Map Users Conference, Denver, Colorado, May 10-13, 2011

    Science.gov (United States)

    Sieverling, Jennifer B.; Dietterle, Jeffrey

    2014-01-01

    The U.S. Geological Survey (USGS) is sponsoring the first The National Map Users Conference in conjunction with the eighth biennial Geographic Information Science (GIS) Workshop on May 10-13, 2011, in Lakewood, Colorado. The GIS Workshop will be held at the USGS National Training Center, located on the Denver Federal Center, Lakewood, Colorado, May 10-11. The National Map Users Conference will be held directly after the GIS Workshop at the Denver Marriott West, a convention hotel in the Lakewood, Colorado area, May 12-13. The National Map is designed to serve the Nation by providing geographic data and knowledge for government, industry, and public uses. The goal of The National Map Users Conference is to enhance communications and collaboration among the communities of users of and contributors to The National Map, including USGS, Department of the Interior, and other government GIS specialists and scientists, as well as the broader geospatial community. The USGS National Geospatial Program intends the conference to serve as a forum to engage users and more fully discover and meet their needs for the products and services of The National Map. The goal of the GIS Workshop is to promote advancement of GIS and related technologies and concepts as well as the sharing of GIS knowledge within the USGS GIS community. This collaborative opportunity for multi-disciplinary GIS and associated professionals will allow attendees to present and discuss a wide variety of geospatial-related topics. The Users Conference and Workshop collaboration will bring together scientists, managers, and data users who, through presentations, posters, seminars, workshops, and informal gatherings, will share accomplishments and progress on a variety of geospatial topics. During this joint event, attendees will have the opportunity to present or demonstrate their work; to develop their knowledge by attending hands-on workshops, seminars, and presentations given by professionals from USGS and

  4. Developing and testing the CHORDS: Characteristics of Responsible Drinking Survey.

    Science.gov (United States)

    Barry, Adam E; Goodson, Patricia

    2011-01-01

    Report on the development and psychometric testing of a theoretically and evidence-grounded instrument, the Characteristics of Responsible Drinking Survey (CHORDS). Instrument subjected to four phases of pretesting (cognitive validity, cognitive and motivational qualities, pilot test, and item evaluation) and a final posttest implementation. Large public university in Texas. Randomly selected convenience sample (n  =  729) of currently enrolled students. This 78-item questionnaire measures individuals' responsible drinking beliefs, motivations, intentions, and behaviors. Cronbach α, split-half reliability, principal components analysis and Spearman ρ were conducted to investigate reliability, stability, and validity. Measures in the CHORDS exhibited high internal consistency reliability and strong correlations of split-half reliability. Factor analyses indicated five distinct scales were present, as proposed in the theoretical model. Subscale composite scores also exhibited a correlation to alcohol consumption behaviors, indicating concurrent validity. The CHORDS represents the first instrument specifically designed to assess responsible drinking beliefs and behaviors. It was found to elicit valid and reliable data among a college student sample. This instrument holds much promise for practitioners who desire to empirically investigate dimensions of responsible drinking.

  5. A global survey of hydrogen energy research, development and policy

    International Nuclear Information System (INIS)

    Solomon, Barry D.; Banerjee, Abhijit

    2006-01-01

    Several factors have led to growing interest in a hydrogen energy economy, especially for transportation. A successful transition to a major role for hydrogen will require much greater cost-effectiveness, fueling infrastructure, consumer acceptance, and a strategy for its basis in renewable energy feedstocks. Despite modest attention to the need for a sustainable hydrogen energy system in several countries, in most cases in the short to mid term hydrogen will be produced from fossil fuels. This paper surveys the global status of hydrogen energy research and development (R and D) and public policy, along with the likely energy mix for making it. The current state of hydrogen energy R and D among auto, energy and fuel-cell companies is also briefly reviewed. Just two major auto companies and two nations have specific targets and timetables for hydrogen fuel cells or vehicle production, although the EU also has an aggressive, less specific strategy. Iceland and Brazil are the only nations where renewable energy feedstocks are envisioned as the major or sole future source of hydrogen. None of these plans, however, are very certain. Thus, serious questions about the sustainability of a hydrogen economy can be raised

  6. Application of Intervention Mapping to the Development of a Complex Physical Therapist Intervention.

    Science.gov (United States)

    Jones, Taryn M; Dear, Blake F; Hush, Julia M; Titov, Nickolai; Dean, Catherine M

    2016-12-01

    Physical therapist interventions, such as those designed to change physical activity behavior, are often complex and multifaceted. In order to facilitate rigorous evaluation and implementation of these complex interventions into clinical practice, the development process must be comprehensive, systematic, and transparent, with a sound theoretical basis. Intervention Mapping is designed to guide an iterative and problem-focused approach to the development of complex interventions. The purpose of this case report is to demonstrate the application of an Intervention Mapping approach to the development of a complex physical therapist intervention, a remote self-management program aimed at increasing physical activity after acquired brain injury. Intervention Mapping consists of 6 steps to guide the development of complex interventions: (1) needs assessment; (2) identification of outcomes, performance objectives, and change objectives; (3) selection of theory-based intervention methods and practical applications; (4) organization of methods and applications into an intervention program; (5) creation of an implementation plan; and (6) generation of an evaluation plan. The rationale and detailed description of this process are presented using an example of the development of a novel and complex physical therapist intervention, myMoves-a program designed to help individuals with an acquired brain injury to change their physical activity behavior. The Intervention Mapping framework may be useful in the development of complex physical therapist interventions, ensuring the development is comprehensive, systematic, and thorough, with a sound theoretical basis. This process facilitates translation into clinical practice and allows for greater confidence and transparency when the program efficacy is investigated. © 2016 American Physical Therapy Association.

  7. Harassment in workplace among school teachers: development of a survey.

    Science.gov (United States)

    Russo, Andrea; Milić, Ranko; Knezević, Bojana; Mulić, Rosanda; Mustajbegović, Jadranka

    2008-08-01

    To develop a questionnaire on harassment in the workplace among teachers at primary and secondary schools. We analyzed the existing questionnaires on harassment in the workplace and developed a new one was to specifically address harassment of teachers in the public education sector. The questionnaire was then experimentally applied to a sample of 764 primary and secondary school teachers in Split Dalmatia County, Croatia. It included three scales -exposure to harassment, witnessing harassment, and disturbance by harassment. Validity of the three scales was examined by factor analysis. All three scales showed satisfactory metric characteristics: Cronbach alpha coefficient was 0.93 for exposure scale, 0.95 for witnessing scale, and 0.97 for disturbance scale. Out of 764 teachers surveyed, 164 (22.4%) were exposed to and 192 (31.7%) witnessed different kinds of harassment in the previous 12 months. There were significantly more of those who experienced harassment as witnesses (chi(2)(1)=249.301; Pharassment disturbed women more than men (chi(2)(1)=5.27; P=0.022). Those who were exposed to harassment had significantly lower median age (42; range 23-68) than those who were not exposed (45; range 23-65) (U=31401.50; z=2.129; P=0.033). The questionnaire registered wide spectrum of harassment types, indicating the need for continuous monitoring and systematic work on the prevention of these phenomena. The study showed that exposure to harassment is associated with age, indicating that younger teachers should be the target population for detection and prevention of workplace harassment.

  8. Development of multigene expression signature maps at the protein level from digitized immunohistochemistry slides.

    Directory of Open Access Journals (Sweden)

    Gregory J Metzger

    Full Text Available Molecular classification of diseases based on multigene expression signatures is increasingly used for diagnosis, prognosis, and prediction of response to therapy. Immunohistochemistry (IHC is an optimal method for validating expression signatures obtained using high-throughput genomics techniques since IHC allows a pathologist to examine gene expression at the protein level within the context of histologically interpretable tissue sections. Additionally, validated IHC assays may be readily implemented as clinical tests since IHC is performed on routinely processed clinical tissue samples. However, methods have not been available for automated n-gene expression profiling at the protein level using IHC data. We have developed methods to compute expression level maps (signature maps of multiple genes from IHC data digitized on a commercial whole slide imaging system. Areas of cancer for these expression level maps are defined by a pathologist on adjacent, co-registered H&E slides, allowing assessment of IHC statistics and heterogeneity within the diseased tissue. This novel way of representing multiple IHC assays as signature maps will allow the development of n-gene expression profiling databases in three dimensions throughout virtual whole organ reconstructions.

  9. Development of process maps for plasma spray: case study for molybdenum

    International Nuclear Information System (INIS)

    Sampath, S.; Jiang, X.; Kulkarni, A.; Matejicek, J.; Gilmore, D.L.; Neiser, R.A.

    2003-01-01

    A schematic representation referred to as 'process maps' examines the role of process variables on the properties of plasma-sprayed coatings. Process maps have been developed for air plasma spraying of molybdenum. Experimental work was done to investigate the importance of such spray parameters as gun current, primary gas flow, auxiliary gas flow, and powder carrier gas flow. In-flight particle temperatures and velocities were measured and diameters estimated in various areas of the spray plume. Empirical models were developed relating the input parameters to the in-flight particle characteristics. Molybdenum splats and coatings were produced at three distinct process conditions identified from the first-order process map experiments. In addition, substrate surface temperature during deposition was treated as a variable. Within the tested range, modulus, hardness and thermal conductivity increases with particle velocity, while oxygen content and porosity decreases. Increasing substrate deposition temperature resulted in dramatic improvement in coating thermal conductivity and modulus, while simultaneously increasing coating oxide content. Indentation reveals improved fracture resistance for the coatings prepared at higher substrate temperature. Residual stress was significantly affected by substrate temperature, although not to a great extent by particle conditions within the investigated parameter range. Coatings prepared at high substrate temperature with high-energy particles suffered considerably less damage in a wear test. The mechanisms behind these changes are discussed within the context relational maps, which have been proposed

  10. Systematic mapping study of information communication technology research for agriculture (in case of developing Countries)

    DEFF Research Database (Denmark)

    Zewge, Amanuel; Dittrich, Yvonne

    2015-01-01

    Context: A rural community in a developing country is a socially complex and infrastructural weak environment that demands clear understanding of the social, economical, cultural, and political precondition before implementing information commutation technology (ICT) innovations. Objective: This ...... for an ongoing discourse to fill identified gaps from software engineering, computer science or information system research perspective. Keywords: design method, information system, development, agriculture.......: This work aims to conduct a Systematic Mapping Study (SMS) to get an in-depth understanding about ICT based researches for agriculture in developing countries. Method: A systematic mapping study was carried out to investigate and distill the state-of-the-art from ranked journals and conference publications....... In doing so, data extraction task was carried out using fifteen variables. Eg. What kinds of research challenges and contributions were reported to design ICTs based solutions? Which disciplines (knowledge areas) were most explored? Result: ICT in agriculture has gained attention over the past few years...

  11. Plasticity in developing brain: active auditory exposure impacts prelinguistic acoustic mapping.

    Science.gov (United States)

    Benasich, April A; Choudhury, Naseem A; Realpe-Bonilla, Teresa; Roesler, Cynthia P

    2014-10-01

    A major task across infancy is the creation and tuning of the acoustic maps that allow efficient native language processing. This process crucially depends on ongoing neural plasticity and keen sensitivity to environmental cues. Development of sensory mapping has been widely studied in animal models, demonstrating that cortical representations of the sensory environment are continuously modified by experience. One critical period for optimizing human language mapping is early in the first year; however, the neural processes involved and the influence of passive compared with active experience are as yet incompletely understood. Here we demonstrate that, while both active and passive acoustic experience from 4 to 7 months of age, using temporally modulated nonspeech stimuli, impacts acoustic mapping, active experience confers a significant advantage. Using event-related potentials (ERPs), we show that active experience increases perceptual vigilance/attention to environmental acoustic stimuli (e.g., larger and faster P2 peaks) when compared with passive experience or maturation alone. Faster latencies are also seen for the change discrimination peak (N2*) that has been shown to be a robust infant predictor of later language through age 4 years. Sharpening is evident for both trained and untrained stimuli over and above that seen for maturation alone. Effects were also seen on ERP morphology for the active experience group with development of more complex waveforms more often seen in typically developing 12- to 24-month-old children. The promise of selectively "fine-tuning" acoustic mapping as it emerges has far-reaching implications for the amelioration and/or prevention of developmental language disorders. Copyright © 2014 the authors 0270-6474/14/3413349-15$15.00/0.

  12. High resolution digital soil mapping as a future instrument for developing sustainable landuse strategies

    Science.gov (United States)

    Gries, Philipp; Funke, Lisa-Marie; Baumann, Frank; Schmidt, Karsten; Behrens, Thorsten; Scholten, Thomas

    2016-04-01

    Climate change, increase in population and intensification of land use pose a great challenge for sustainable handling of soils. Intelligent landuse systems are able to minimize and/or avoid soil erosion and loss of soil fertility. A successful application of such systems requires area-wide soil information with high resolution. Containing three consecutive steps, the project INE-2-H („innovative sustainable landuse") at the University of Tuebingen is about creating high-resolution soil information using Digital Soil Mapping (DSM) techniques to develop sustainable landuse strategies. Input data includes soil data from fieldwork (texture and carbon content), the official digital soil and geological map (1:50.000) as well as a wide selection of local, complex and combined terrain parameters. First, soil maps have been created using the DSM approach and Random Forest (RF). Due to high resolution (10x10 m pixels), those maps show a more detailed spatial variability of soil information compared to the official maps used. Root mean square errors (RMSE) of the modelled maps vary from 2.11 % to 6.87 % and the coefficients of determination (R²) go from 0.42 to 0.68. Second, soil erosion potentials have been estimated according to the Universal Soil Loss Equation (USLE). Long-term average annual soil loss ranges from 0.56 to 24.23 [t/ha/a]. Third, combining high-resolution erosion potentials with expert-knowledge of local farmers will result in a landuse system adapted to local conditions. This system will include sustainable strategies reducing soil erosion and conserving soil fertility.

  13. Polish Vocabulary Development in 2-Year-Olds: Comparisons with English Using the Language Development Survey

    Science.gov (United States)

    Rescorla, Leslie; Constants, Holly; Bialecka-Pikul, Marta; Stepien-Nycz, Malgorzata; Ochal, Anna

    2017-01-01

    Purpose: The objective of this study was to compare vocabulary size and composition in 2-year-olds learning Polish or English as measured by the Language Development Survey (LDS; Rescorla, 1989). Method: Participants were 199 Polish toddlers (M = 24.14 months, SD = 0.35) and 422 U.S. toddlers (M = 24.69 months, SD = 0.78). Results: Test-retest…

  14. Linkage of Operational Needs for Spent Nuclear Fuel Disposition to Technology Development Maps

    International Nuclear Information System (INIS)

    Dahl, C. A.

    2002-01-01

    The Department of Energy is preparing spent nuclear fuel (SNF) for interim storage at the major SNF sites. At the same time, work is proceeding to analyze the requirements for disposal of the SNF in a geologic repository, currently proposed to be located at Yucca Mountain in Nevada. To assist with the placement of SNF in either interim storage or the repository, certain technologies must be developed and implemented to assure that the storage can be safely and efficiently achieved. Technology development funding is diffused through a variety of resources within the DOE complex. A tool is required to show the integration of technology development activities with each of the funding sources, show the entities performing the development work, and demonstrate how the technology development assists with the interim storage and final disposition of SNF. A series of requirements for this tool were defined and a tool developed to assist with showing the required information. The tool has taken the form of Technology Development Maps that link development information, funding sources, entities performing development activities, and the material disposition path for each SNF type. These maps will be maintained as living documents to assist with integrating development activities for the SNF program

  15. Fiscal 1995 geothermal development promotion survey. Natural environment survey report; 1995 nendo chinetsu kaihatsu sokushin chosa. Shizen kankyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In Candidate C area for the geothermal development survey, the natural environment was surveyed and `the secondary landscape assessment` was summed up in which places proposed for drilling of large-size wells and for construction of power generation facilities are extracted and a simulation of the landscape is conducted. The area for survey is the Shiramizu-gawa region in the south of Lake Akan, Akan-cho, Akan-gun, Hokkaido. The field survey was carried out about three items of landscape, plants and animals during the June-November period, 1995. As to the flora, diverse florae including vegetation unique to alpine areas, wetlands, and fumarole surrounding areas were found in the region, which is covered with summer-green broad-leaved forests or mixed forests of coniferous and broad-leaved trees. As to the fauna, faunae inhabitant of the highly natural forests were found including black woodpeckers and mountain hawk eagles. As a result of studying the places proposed for geothermal development from the above-mentioned survey, two places were picked up in the west of the survey area, where geothermal development is comparatively less influential in the natural environment and landscape and there is a high locational adaptability. 19 refs., 56 figs., 49 tabs.

  16. Survey indicated that core outcome set development is increasingly including patients, being conducted internationally and using Delphi surveys.

    Science.gov (United States)

    Biggane, Alice M; Brading, Lucy; Ravaud, Philippe; Young, Bridget; Williamson, Paula R

    2018-02-17

    There are numerous challenges in including patients in a core outcome set (COS) study, these can vary depending on the patient group. This study describes current efforts to include patients in the development of COS, with the aim of identifying areas for further improvement and study. Using the COMET database, corresponding authors of COS projects registered or published from 1 January 2013 to 2 February 2017 were invited via a personalised email to participate in a short online survey. The survey and emails were constructed to maximise the response rate by following the academic literature on enhancing survey responses. Personalised reminder emails were sent to non-responders. This survey explored the frequency of patient input in COS studies, who was involved, what methods were used and whether or not the COS development was international. One hundred and ninety-two COS developers were sent the survey. Responses were collected from 21 February 2017 until 7 May 2017. One hundred and forty-six unique developers responded, yielding a 76% response rate and data in relation to 195 unique COSs (as some developers had worked on multiple COSs). Of focus here are their responses regarding 162 COSs at the published, completed or ongoing stages of development. Inclusion of patient participants was indicated in 87% (141/162) of COSs in the published completed or ongoing stages and over 94% (65/69) of ongoing COS projects. Nearly half (65/135) of COSs included patient participants from two or more countries and 22% (30/135) included patient participants from five or more countries. The Delphi survey was reported as being used singularly or in combination with other methods in 85% (119/140) of projects. Almost a quarter (16/65) of ongoing studies reported using a combination of qualitative interviews, Delphi survey and consensus meeting. These findings indicated that the Delphi survey is the most popular method of facilitating patient participation, while the combination of

  17. DEVELOPMENT AND APPLICATION OF THE KEY TECHNOLOGIES FOR THE QUALITY CONTROL AND INSPECTION OF NATIONAL GEOGRAPHICAL CONDITIONS SURVEY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Y. Zhao

    2018-04-01

    Full Text Available The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth’s surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of “five-in-one” quality control that is constituted by “quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions” by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

  18. Developing a climate-based risk map of fascioliasis outbreaks in Iran

    Directory of Open Access Journals (Sweden)

    Mansour Halimi

    2015-09-01

    Full Text Available Summary: The strong relationship between climate and fascioliasis outbreaks enables the development of climate-based models to estimate the potential risk of fascioliasis outbreaks. This work aims to develop a climate-based risk map of fascioliasis outbreaks in Iran using Ollerenshaw's fascioliasis risk index incorporating geographical information system (GIS. Using this index, a risk map of fascioliasis outbreaks for the entire country was developed. We determined that the country can be divided into 4 fascioliasis outbreak risk categories. Class 1, in which the Mt value is less than 100, includes more than 0.91 of the country's area. The climate in this class is not conducive to fascioliasis outbreaks in any month. Dryness and low temperature in the wet season (December to April are the key barriers against fascioliasis outbreaks in this class. The risk map developed based on climatic factors indicated that only 0.03 of the country's area, including Gilan province in the northern region of Iran, is highly suitable to fascioliasis outbreaks during September to January. The Mt value is greater than 500 in this class. Heavy rainfall in the summer and fall, especially in Rasht, Astara and Bandar Anzaly (≥1000 mm/year, creates more suitable breeding places for snail intermediate hosts. Keywords: Ollerenshaw fascioliasis risk index, Climate, Gilan province, Iran

  19. Developing a climate-based risk map of fascioliasis outbreaks in Iran.

    Science.gov (United States)

    Halimi, Mansour; Farajzadeh, Manuchehr; Delavari, Mahdi; Arbabi, Mohsen

    2015-01-01

    The strong relationship between climate and fascioliasis outbreaks enables the development of climate-based models to estimate the potential risk of fascioliasis outbreaks. This work aims to develop a climate-based risk map of fascioliasis outbreaks in Iran using Ollerenshaw's fascioliasis risk index incorporating geographical information system (GIS). Using this index, a risk map of fascioliasis outbreaks for the entire country was developed. We determined that the country can be divided into 4 fascioliasis outbreak risk categories. Class 1, in which the Mt value is less than 100, includes more than 0.91 of the country's area. The climate in this class is not conducive to fascioliasis outbreaks in any month. Dryness and low temperature in the wet season (December to April) are the key barriers against fascioliasis outbreaks in this class. The risk map developed based on climatic factors indicated that only 0.03 of the country's area, including Gilan province in the northern region of Iran, is highly suitable to fascioliasis outbreaks during September to January. The Mt value is greater than 500 in this class. Heavy rainfall in the summer and fall, especially in Rasht, Astara and Bandar Anzaly (≥ 1000 mm/year), creates more suitable breeding places for snail intermediate hosts. Copyright © 2015 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

  20. Harassment in Workplace Among School Teachers: Development of Survey

    Science.gov (United States)

    Russo, Andrea; Milić, Ranko; Knežević, Bojana; Mulić, Rosanda; Mustajbegović, Jadranka

    2008-01-01

    Aim To study the incidence of harassment in the workplace among teachers at primary and secondary schools. Methods We analyzed the existing questionnaires on harassment in the workplace and developed a new one was to specifically address harassment of teachers in the public education sector. The questionnaire was then experimentally applied to a sample of 764 primary and secondary school teachers in Split Dalmatia County, Croatia. It included three scales –exposure to harassment, witnessing harassment, and disturbance by harassment. Validity of the three scales was examined by factor analysis. Results All three scales showed satisfactory metric characteristics: Cronbach α coefficient was 0.93 for exposure scale, 0.95 for witnessing scale, and 0.97 for disturbance scale. Out of 764 teachers surveyed, 164 (22.4%) were exposed to and 192 (31.7%) witnessed different kinds of harassment in the previous 12 months. There were significantly more of those who experienced harassment as witnesses (χ21 = 249.301; P harassment disturbed women more than men (χ21 = 5.27; P = 0.022). Those who were exposed to harassment had significantly lower median age (42; range 23-68) than those who were not exposed (45; range 23-65) (U = 31401.50; z = 2.129; P = 0.033). Conclusion The questionnaire registered wide spectrum of harassment types, indicating the need for continuous monitoring and systematic work on the prevention of these phenomena. The study showed that exposure to harassment is associated with age, indicating that younger teachers should be the target population for detection and prevention of workplace harassment. PMID:18717002

  1. Development of a Conceptual Mapping Standard to Link Building and Geospatial Information

    Directory of Open Access Journals (Sweden)

    Taewook Kang

    2018-04-01

    Full Text Available This study introduces the BIM (building information modeling-GIS (geographic information system conceptual mapping (B2GM standard ISO N19166 and proposes a mapping mechanism. In addition, the major issues concerning BIM-GIS integration, and the considerations that it requires, are discussed. The B2GM is currently being standardized by the spatial-information international standardization organization TC211. Previous studies on BIM-GIS integration seem to focus on the integration of different types of model schemas and on the implementation of service interfaces. B2GM concerns the clear definition of the conditions and methods for mapping the object information required from the user’s use-case viewpoint for city-scale mapping. The benefits of the B2GM approach are that the user is able directly control the BIM-GIS linkage and integration process in order to acquire the necessary objection information. This can reveal cases of possibly unclear BIM-GIS integration outside the black box in an explicit and standard way, so that the user can distinctively predict the final output obtainable from the BIM-GIS integration. This study examined B2GM in terms of its development background, components, and several utilization examples, as well as the levels and considerations of the integration of different BIM-GIS models.

  2. [The intervention mapping protocol: A structured process to develop, implement and evaluate health promotion programs].

    Science.gov (United States)

    Fassier, J-B; Lamort-Bouché, M; Sarnin, P; Durif-Bruckert, C; Péron, J; Letrilliart, L; Durand, M-J

    2016-02-01

    Health promotion programs are expected to improve population health and reduce social inequalities in health. However, their theoretical foundations are frequently ill-defined, and their implementation faces many obstacles. The aim of this article is to describe the intervention mapping protocol in health promotion programs planning, used recently in several countries. The challenges of planning health promotion programs are presented, and the six steps of the intervention mapping protocol are described with an example. Based on a literature review, the use of this protocol, its requirements and potential limitations are discussed. The intervention mapping protocol has four essential characteristics: an ecological perspective (person-environment), a participative approach, the use of theoretical models in human and social sciences and the use of scientific evidence. It comprises six steps: conduct a health needs assessment, define change objectives, select theory-based change techniques and practical applications, organize techniques and applications into an intervention program (logic model), plan for program adoption, implementation, and sustainability, and generate an evaluation plan. This protocol was used in different countries and domains such as obesity, tobacco, physical activity, cancer and occupational health. Although its utilization requires resources and a critical stance, this protocol was used to develop interventions which efficacy was demonstrated. The intervention mapping protocol is an integrated process that fits the scientific and practical challenges of health promotion. It could be tested in France as it was used in other countries, in particular to reduce social inequalities in health. Copyright © 2016. Published by Elsevier Masson SAS.

  3. Scanning Electron Microscope Mapping System Developed for Detecting Surface Defects in Fatigue Specimens

    Science.gov (United States)

    Bonacuse, Peter J.; Kantzos, Peter T.

    2002-01-01

    An automated two-degree-of-freedom specimen positioning stage has been developed at the NASA Glenn Research Center to map and monitor defects in fatigue specimens. This system expedites the examination of the entire gauge section of fatigue specimens so that defects can be found using scanning electron microscopy (SEM). Translation and rotation stages are driven by microprocessor-based controllers that are, in turn, interfaced to a computer running custom-designed software. This system is currently being used to find and record the location of ceramic inclusions in powder metallurgy materials. The mapped inclusions are periodically examined during interrupted fatigue experiments. The number of cycles to initiate cracks from these inclusions and the rate of growth of initiated cracks can then be quantified. This information is necessary to quantify the effect of this type of defect on the durability of powder metallurgy materials. This system was developed with support of the Ultra Safe program.

  4. Development of a new flux map processing code for moveable detector system in PWR

    Energy Technology Data Exchange (ETDEWEB)

    Li, W.; Lu, H.; Li, J.; Dang, Z.; Zhang, X. [China Nuclear Power Technology Research Institute, 47 F/A Jiangsu Bldg., Yitian Road, Futian District, Shenzhen 518026 (China); Wu, Y.; Fan, X. [Information Technology Center, China Guangdong Nuclear Power Group, Shenzhen 518000 (China)

    2013-07-01

    This paper presents an introduction to the development of the flux map processing code MAPLE developed by China Nuclear Power Technology Research Institute (CNPPJ), China Guangdong Nuclear Power Group (CGN). The method to get the three-dimensional 'measured' power distribution according to measurement signal has also been described. Three methods, namely, Weight Coefficient Method (WCM), Polynomial Expand Method (PEM) and Thin Plane Spline (TPS) method, have been applied to fit the deviation between measured and predicted results for two-dimensional radial plane. The measured flux map data of the LINGAO nuclear power plant (NPP) is processed using MAPLE as a test case to compare the effectiveness of the three methods, combined with a 3D neutronics code COCO. Assembly power distribution results show that MAPLE results are reasonable and satisfied. More verification and validation of the MAPLE code will be carried out in future. (authors)

  5. The development of an adolescent smoking cessation intervention--an Intervention Mapping approach to planning.

    Science.gov (United States)

    Dalum, Peter; Schaalma, Herman; Kok, Gerjo

    2012-02-01

    The objective of this project was to develop a theory- and evidence-based adolescent smoking cessation intervention using both new and existing materials. We used the Intervention Mapping framework for planning health promotion programmes. Based on a needs assessment, we identified important and changeable determinants of cessation behaviour, specified change objectives for the intervention programme, selected theoretical change methods for accomplishing intervention objectives and finally operationalized change methods into practical intervention strategies. We found that guided practice, modelling, self-monitoring, coping planning, consciousness raising, dramatic relief and decisional balance were suitable methods for adolescent smoking cessation. We selected behavioural journalism, guided practice and Motivational Interviewing as strategies in our intervention. Intervention Mapping helped us to develop as systematic adolescent smoking cessation intervention with a clear link between behavioural goals, theoretical methods, practical strategies and materials and with a strong focus on implementation and recruitment. This paper does not present evaluation data.

  6. Lymphatic filariasis mapping by Immunochromatographic Test cards and baseline microfilaria survey prior to mass drug administration in Sierra Leone

    Directory of Open Access Journals (Sweden)

    Koroma Joseph B

    2012-01-01

    Full Text Available Abstract Background National mapping of lymphatic filariasis (LF was conducted using Immunochromatographic tests (ICT in 2005 to determine endemicity and geographic spread of the disease. A baseline microfilaria survey was then conducted to determine LF prevalence and microfilaria intensity. Methods In 2005 1,982 persons of 15 years and over from 14 health districts were selected and fingertip blood samples were tested with ICT cards. In 2007-8 blood samples were taken between 10 p.m. and 2 a.m. and examined for microfilaria (mf from 9,288 persons from 16 sentinel sites representing each district and 2 additional sites for districts with populations over 500,000 (Bo and Kenema. Results The overall LF prevalence by ICT cards was 21% (males 28%, females 15%. All districts had a prevalence of Wuchereria bancrofti antigen > 1%. Distribution of LF prevalence showed a strong spatial correlation pattern with high prevalence in a large area in the northeast gradually decreasing to a relatively low prevalence in the southwest coast. High prevalence was found in the northeast, Bombali (52%, Koinadugu (46%, Tonkolili (37% and Kono (30%. Low prevalence was found in the southwest, Bonthe (3% and Pujehun (4%. The mf prevalence was higher in the northeast: Bombali, 6.7%, Koinadugu 5.7%, Port Loko 4.4% and Kono 2.4%. Overall there was a significant difference in mf prevalence by gender: males 2.9%, females 1.8% (p = 0.0002 and within districts in Kailahun, Kono, Port Loko, Moyamba and Koinadugu (all p 20 years (2.5% than in people ≤ 20 years (1.7% (p = 0.043. The overall arithmetic mean mf density was 50.30 mf/ml among mf-positive individuals and 1.19 mf/ml in the population examined which varied significantly between districts. Conclusions The ICT results showed that LF was endemic nationwide and that preventive chemotherapy (PCT was justified across the country. Both the ICT and microfilaraemia surveys found that prevalence was greater in males than females

  7. Development of the regulation mapping of 1 MW internal combustion engine for diagnostic scopes

    International Nuclear Information System (INIS)

    Barelli, L.; Bidini, G.; Bonucci, F.

    2009-01-01

    The present work deals with the creation, on the basis of experimental data, of the regulation maps for the 1 MW cogenerative internal combustion engine (ICE) installed at the Engineering Faculty of Perugia University. The regulation logic mapping is necessary for the development of a thermodynamic model of the engine behaviour to simulate the effects of possible malfunctions occurrence, such as deterioration or fouling not directly experienced on the engine. Such a work is carried out as a part of a more general research activity concerning the development of a diagnosis system for the cogenerative plant. Therefore, a first phase of the present work relates to the experimental data gathering campaign and the consequent data analysis to individuate the characteristic parameters of regulation. In the second phase, instead, a neural simulator of the control logic was developed on the basis of the experimental data for the engine operation at full load (initially considered at 980 kW) and during transitory. Consequently, through such a simulator the regulation maps of the engine were determined considering the variation range of all the characteristic parameters. Finally, a more accurate analysis of the experimental data relative to the dependence of the produced electric power at regimen on the fuel valve position, encouraged the authors to develop a further neural simulator able to reproduce the regulation commands for different values of the target power set for the regimen operation. Consequently, also the regulation mapping was revised obtaining a synthetic representation of the regulation logic useful for the implementation in the thermodynamic model of the engine dynamic behaviour

  8. UAV SURVEYING FOR A COMPLETE MAPPING AND DOCUMENTATION OF ARCHAEOLOGICAL FINDINGS. THE EARLY NEOLITHIC SITE OF PORTONOVO

    Directory of Open Access Journals (Sweden)

    E. S. Malinverni

    2016-06-01

    Full Text Available The huge potential of 3D digital acquisition techniques for the documentation of archaeological sites, as well as the related findings, is almost well established. In spite of the variety of available techniques, a sole documentation pipeline cannot be defined a priori because of the diversity of archaeological settings. Stratigraphic archaeological excavations, for example, require a systematic, quick and low cost 3D single-surface documentation because the nature of stratigraphic archaeology compels providing documentary evidence of any excavation phase. Only within a destructive process each single excavation cannot be identified, documented and interpreted and this implies the necessity of a re- examination of the work on field. In this context, this paper describes the methodology, carried out during the last years, to 3D document the Early Neolithic site of Portonovo (Ancona, Italy and, in particular, its latest step consisting in a photogrammetric aerial survey by means of UAV platform. It completes the previous research delivered in the same site by means of terrestrial laser scanning and close range techniques and sets out different options for further reflection in terms of site coverage, resolution and campaign cost. With the support of a topographic network and a unique reference system, the full documentation of the site is managed in order to detail each excavation phase; besides, the final output proves how the 3D digital methodology can be completely integrated with reasonable costs during the excavation and used to interpret the archaeological context. Further contribution of this work is the comparison between several acquisition techniques (i.e. terrestrial and aerial, which could be useful as decision support system for different archaeological scenarios. The main objectives of the comparison are: i the evaluation of 3D mapping accuracy from different data sources, ii the definition of a standard pipeline for different

  9. Using drone-mounted cameras for on-site body documentation: 3D mapping and active survey.

    Science.gov (United States)

    Urbanová, Petra; Jurda, Mikoláš; Vojtíšek, Tomáš; Krajsa, Jan

    2017-12-01

    Recent advances in unmanned aerial technology have substantially lowered the cost associated with aerial imagery. As a result, forensic practitioners are today presented with easy low-cost access to aerial photographs at remote locations. The present paper aims to explore boundaries in which the low-end drone technology can operate as professional crime scene equipment, and to test the prospects of aerial 3D modeling in the forensic context. The study was based on recent forensic cases of falls from height admitted for postmortem examinations. Three mock outdoor forensic scenes featuring a dummy, skeletal remains and artificial blood were constructed at an abandoned quarry and subsequently documented using a commercial DJI Phantom 2 drone equipped with a GoPro HERO 4 digital camera. In two of the experiments, the purpose was to conduct aerial and ground-view photography and to process the acquired images with a photogrammetry protocol (using Agisoft PhotoScan ® 1.2.6) in order to generate 3D textured models. The third experiment tested the employment of drone-based video recordings in mapping scattered body parts. The results show that drone-based aerial photography is capable of producing high-quality images, which are appropriate for building accurate large-scale 3D models of a forensic scene. If, however, high-resolution top-down three-dimensional scene documentation featuring details on a corpse or other physical evidence is required, we recommend building a multi-resolution model by processing aerial and ground-view imagery separately. The video survey showed that using an overview recording for seeking out scattered body parts was efficient. In contrast, the less easy-to-spot evidence, such as bloodstains, was detected only after having been marked properly with crime scene equipment. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Development of genomic SSR markers for fingerprinting lettuce (Lactuca sativa L.) cultivars and mapping genes.

    Science.gov (United States)

    Rauscher, Gilda; Simko, Ivan

    2013-01-22

    Lettuce (Lactuca sativa L.) is the major crop from the group of leafy vegetables. Several types of molecular markers were developed that are effectively used in lettuce breeding and genetic studies. However only a very limited number of microsattelite-based markers are publicly available. We have employed the method of enriched microsatellite libraries to develop 97 genomic SSR markers. Testing of newly developed markers on a set of 36 Lactuca accession (33 L. sativa, and one of each L. serriola L., L. saligna L., and L. virosa L.) revealed that both the genetic heterozygosity (UHe = 0.56) and the number of loci per SSR (Na = 5.50) are significantly higher for genomic SSR markers than for previously developed EST-based SSR markers (UHe = 0.32, Na = 3.56). Fifty-four genomic SSR markers were placed on the molecular linkage map of lettuce. Distribution of markers in the genome appeared to be random, with the exception of possible cluster on linkage group 6. Any combination of 32 genomic SSRs was able to distinguish genotypes of all 36 accessions. Fourteen of newly developed SSR markers originate from fragments with high sequence similarity to resistance gene candidates (RGCs) and RGC pseudogenes. Analysis of molecular variance (AMOVA) of L. sativa accessions showed that approximately 3% of genetic diversity was within accessions, 79% among accessions, and 18% among horticultural types. The newly developed genomic SSR markers were added to the pool of previously developed EST-SSRs markers. These two types of SSR-based markers provide useful tools for lettuce cultivar fingerprinting, development of integrated molecular linkage maps, and mapping of genes.

  11. Development and mapping of DArT markers within the Festuca - Lolium complex

    Science.gov (United States)

    Kopecký, David; Bartoš, Jan; Lukaszewski, Adam J; Baird, James H; Černoch, Vladimír; Kölliker, Roland; Rognli, Odd Arne; Blois, Helene; Caig, Vanessa; Lübberstedt, Thomas; Studer, Bruno; Shaw, Paul; Doležel, Jaroslav; Kilian, Andrzej

    2009-01-01

    Background Grasses are among the most important and widely cultivated plants on Earth. They provide high quality fodder for livestock, are used for turf and amenity purposes, and play a fundamental role in environment protection. Among cultivated grasses, species within the Festuca-Lolium complex predominate, especially in temperate regions. To facilitate high-throughput genome profiling and genetic mapping within the complex, we have developed a Diversity Arrays Technology (DArT) array for five grass species: F. pratensis, F. arundinacea, F. glaucescens, L. perenne and L. multiflorum. Results The DArTFest array contains 7680 probes derived from methyl-filtered genomic representations. In a first marker discovery experiment performed on 40 genotypes from each species (with the exception of F. glaucescens for which only 7 genotypes were used), we identified 3884 polymorphic markers. The number of DArT markers identified in every single genotype varied from 821 to 1852. To test the usefulness of DArTFest array for physical mapping, DArT markers were assigned to each of the seven chromosomes of F. pratensis using single chromosome substitution lines while recombinants of F. pratensis chromosome 3 were used to allocate the markers to seven chromosome bins. Conclusion The resources developed in this project will facilitate the development of genetic maps in Festuca and Lolium, the analysis on genetic diversity, and the monitoring of the genomic constitution of the Festuca × Lolium hybrids. They will also enable marker-assisted selection for multiple traits or for specific genome regions. PMID:19832973

  12. Computer mapping software and geographic data base development: Oak Ridge National Laboratory user experience

    International Nuclear Information System (INIS)

    Honea, B.; Johnson, P.

    1978-01-01

    As users of computer display tools, our opinion is that the researcher's needs should guide and direct the computer scientist's development of mapping software and data bases. Computer graphic techniques developed for the sake of the computer graphics community tend to be esoteric and rarely suitable for user problems. Two types of users exist for computer graphic tools: the researcher who is generally satisfied with abstract but accurate displays for analysis purposes and the decision maker who requires synoptic and easily comprehended displays relevant to the issues he or she must address. Computer mapping software and data bases should be developed for the user in a generalized and standardized format for ease in transferring and to facilitate the linking or merging with larger analysis systems. Maximum utility of computer mapping tools is accomplished when linked to geographic information and analysis systems. Computer graphic techniques have varying degrees of utility depending upon whether they are used for data validation, analysis procedures or presenting research results

  13. Development of DosiMap: dosimetry device for radiotherapy quality assurance

    International Nuclear Information System (INIS)

    Frelin, A.M.

    2006-10-01

    This thesis deals with the development of a new dosimetry device for the control of radiotherapy beams. This device is composed of a plane plastic scintillator which is set within a polystyrene phantom. When the 'DosiMap' is irradiated, light is produced. This light is composed of scintillation and Cerenkov radiation, and is accurately measured by a C.C.D. camera. The analysis of the light distribution enables us to deduce the dose distribution in the scintillator plan. This device has many advantages such as tissue equivalence, a good spatial resolution, and a linear response with regard to energy. It also provides immediate measurements, and as a consequence, it is a very adapted tool for clinical use. After the introduction about the basic notions of radiotherapy, the different steps of the 'DosiMap' development are exposed in this thesis. In a first time, plastic scintillators have been tested to determine the best one for this application. Then, the deconvolution of scintillation and Cerenkov radiation have been studied, because we only use scintillation to calculate the dose distribution. The camera being in the irradiation room, a lead shield has also been developed to protect the C.C.D. detector from scattered radiations. Finally, the dose calibration and the dose response of 'DosiMap' are exposed. All this work made feasible the measurement of dose distributions with a precision which turns out to be better than 2% for homogeneous photon beams. Excellent results were also obtained when modulated intensity beams are used. (author)

  14. DEVELOPMENT OF TECHNIQUE FOR ZONING THE FORMER SEMIPALATINSK TEST SITE TERRITORY USINHG GEOINFORMATIONAL MAPPING

    Directory of Open Access Journals (Sweden)

    Yu. Yu. Yakovenko

    2016-01-01

    Full Text Available The paper presents the results of studies on radio-ecological assessment of pollution carried out at the former Semipalatinsk test site. The technique of radio-ecological zoning with methods of geoinformation mapping, including the determination of qualitative and qualitative criteria depending on the degree of superficial soil layer pollution, exposed to anthropogenic radiative impact, is offered. The result of such zoning makes it possible to evaluate the degree of radiation impact on the surveyed area, identify areas with high background radiation and define the borders representing potential risks to the public, residing or carrying out business activities within the area.

  15. What Happens Inside a Fuel Cell? Developing an Experimental Functional Map of Fuel Cell Performance

    KAUST Repository

    Brett, Daniel J. L.

    2010-08-20

    Fuel cell performance is determined by the complex interplay of mass transport, energy transfer and electrochemical processes. The convolution of these processes leads to spatial heterogeneity in the way that fuel cells perform, particularly due to reactant consumption, water management and the design of fluid-flow plates. It is therefore unlikely that any bulk measurement made on a fuel cell will accurately represent performance at all parts of the cell. The ability to make spatially resolved measurements in a fuel cell provides one of the most useful ways in which to monitor and optimise performance. This Minireview explores a range of in situ techniques being used to study fuel cells and describes the use of novel experimental techniques that the authors have used to develop an \\'experimental functional map\\' of fuel cell performance. These techniques include the mapping of current density, electrochemical impedance, electrolyte conductivity, contact resistance and CO poisoning distribution within working PEFCs, as well as mapping the flow of reactant in gas channels using laser Doppler anemometry (LDA). For the high-temperature solid oxide fuel cell (SOFC), temperature mapping, reference electrode placement and the use of Raman spectroscopy are described along with methods to map the microstructural features of electrodes. The combination of these techniques, applied across a range of fuel cell operating conditions, allows a unique picture of the internal workings of fuel cells to be obtained and have been used to validate both numerical and analytical models. © 2010 Wiley-VCH Verlag GmbH& Co. KGaA, Weinheim.

  16. Development of a Chronic Disease Management Program for Stroke Survivors Using Intervention Mapping: The Stroke Coach.

    Science.gov (United States)

    Sakakibara, Brodie M; Lear, Scott A; Barr, Susan I; Benavente, Oscar; Goldsmith, Charlie H; Silverberg, Noah D; Yao, Jennifer; Eng, Janice J

    2017-06-01

    To describe the systematic development of the Stroke Coach, a theory- and evidence-based intervention to improve control of lifestyle behavior risk factors in patients with stroke. Intervention development. Community. Individuals who have had a stroke. We used intervention mapping to guide the development of the Stroke Coach. Intervention mapping is a systematic process used for intervention development and composed of steps that progress from the integration of theory and evidence to the organization of realistic strategies to facilitate the development of a practical intervention supported by empirical evidence. Social cognitive theory was the underlying premise for behavior change, whereas control theory methods were directed toward sustaining the changes to ensure long-term health benefits. Practical evidence-based strategies were linked to behavioral determinants to improve stroke risk factor control. Not applicable. The Stroke Coach is a patient-centered, community-based, telehealth intervention to promote healthy lifestyles after stroke. Over 6 months, participants receive seven 30- to 60-minute telephone sessions with a lifestyle coach who provides education, facilitates motivation for lifestyle modification, and empowers participants to self-management their stroke risk factors. Participants also receive a self-management manual and a self-monitoring kit. Through the use of intervention mapping, we developed a theoretically sound and evidence-grounded intervention to improve risk factor control in patients with stroke. If empirical evaluation of the Stroke Coach produces positive results, the next step will be to develop an implementation intervention to ensure successful uptake and delivery of the program in community and outpatient settings. Copyright © 2017 American Congress of Rehabilitation Medicine. All rights reserved.

  17. Development and genetic mapping of SSR markers in foxtail millet [Setaria italica (L.) P. Beauv.].

    Science.gov (United States)

    Jia, Xiaoping; Zhang, Zhongbao; Liu, Yinghui; Zhang, Chengwei; Shi, Yunsu; Song, Yanchun; Wang, Tianyu; Li, Yu

    2009-02-01

    SSR markers are desirable markers in analysis of genetic diversity, quantitative trait loci mapping and gene locating. In this study, SSR markers were developed from two genomic libraries enriched for (GA)n and (CA)n of foxtail millet [Setaria italica (L.) P. Beauv.], a crop of historical importance in China. A total of 100 SSR markers among the 193 primer pairs detected polymorphism between two mapping parents of an F(2) population, i.e. "B100" of cultivated S. italica and "A10" of wild S. viridis. Excluding 14 markers with unclear amplifications, and five markers unlinked with any linkage group, a foxtail millet SSR linkage map was constructed by integrating 81 new developed SSR markers with 20 RFLP anchored markers. The 81 SSRs covered nine chromosomes of foxtail millet. The length of the map was 1,654 cM, with an average interval distance between markers of 16.4 cM. The 81 SSR markers were not evenly distributed throughout the nine chromosomes, with Ch.8 harbouring the least (3 markers) and Ch.9 harbouring the most (18 markers). To verify the usefulness of the SSR markers developed, 37 SSR markers were randomly chosen to analyze genetic diversity of 40 foxtail millet accessions. Totally 228 alleles were detected, with an average 6.16 alleles per locus. Polymorphism information content (PIC) value for each locus ranged from 0.413 to 0.847, with an average of 0.697. A positive correlation between PIC and number of alleles and between PIC and number of repeat unit were found [0.802 and 0.429, respectively (P < 0.01)]. UPGMA analysis revealed that the 40 foxtail millet cultivars could be grouped into five clusters in which the landraces' grouping was largely consistent with ecotypes while the breeding varieties from different provinces in China tended to be grouped together.

  18. The development of the Patient Expectations of Shoulder Surgery survey

    NARCIS (Netherlands)

    Koorevaar, Rinco C T; Haanstra, Tsjitske; Van't Riet, Esther; Lambers Heerspink, Okke F O; Bulstra, Sjoerd K

    2017-01-01

    BACKGROUND: Patient satisfaction after a surgical procedure is dependent on meeting preoperative expectations. There is currently no patient expectations survey available for patients undergoing shoulder surgery that is validated, reliable, and easy to use in daily practice. The aim of this study

  19. Recent Developments in Astrophysical and Cosmological Exploitation of Microwave Surveys

    DEFF Research Database (Denmark)

    Burigana, Carlo; Davies, Rodney D.; De Bernardis, Paolo

    2013-01-01

    In this paper, we focus on the astrophysical results and the related cosmological implications derived from recent microwave surveys, with emphasis to those coming from the Planck mission. We critically discuss the impact of systematic effects and the role of methods to separate the cosmic...

  20. Determinants of Virulence and In Vitro Development Colocalize on a Genetic Map of Setosphaeria turcica.

    Science.gov (United States)

    Mideros, Santiago X; Chung, Chia-Lin; Wiesner-Hanks, Tyr; Poland, Jesse A; Wu, Dongliang; Fialko, Ariel A; Turgeon, B Gillian; Nelson, Rebecca J

    2018-02-01

    Generating effective and stable strategies for resistance breeding requires an understanding of the genetics of host-pathogen interactions and the implications for pathogen dynamics and evolution. Setosphaeria turcica causes northern leaf blight (NLB), an important disease of maize for which major resistance genes have been deployed. Little is known about the evolutionary dynamics of avirulence (AVR) genes in S. turcica. To test the hypothesis that there is a genetic association between avirulence and in vitro development traits, we (i) created a genetic map of S. turcica, (ii) located candidate AVRHt1 and AVRHt2 regions, and (iii) identified genetic regions associated with several in vitro development traits. A cross was generated between a race 1 and a race 23N strain, and 221 progeny were isolated. Genotyping by sequencing was used to score 2,078 single-nucleotide polymorphism markers. A genetic map spanning 1,981 centimorgans was constructed, consisting of 21 linkage groups. Genetic mapping extended prior evidence for the location and identity of the AVRHt1 gene and identified a region of interest for AVRHt2. The genetic location of AVRHt2 colocalized with loci influencing radial growth and mycelial abundance. Our data suggest a trade-off between virulence on Ht1 and Ht2 and the pathogen's vegetative growth rate. In addition, in-depth analysis of the genotypic data suggests the presence of significant duplication in the genome of S. turcica.

  1. A Strategic Knowledge Map for the Research and Development Department in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Śliwa Małgorzata

    2016-01-01

    Full Text Available Knowledge is a corporate resource, being grounds for initiating activities, which is important in a dynamic economy. The difficulties related to obtaining tacit knowledge, related primarily to experience and observation of the knowledge employee (Mendryk, 2011, encourage the companies to use tools supporting knowledge management and location. This article attempts at designing a dedicated, strategic knowledge map for a research and development department in a manufacturing company. Based on the reference works, the detailed characteristics of specific sources of knowledge in a manufacturing company and tools supporting the process of converting the tacit knowledge into explicit one, for example, the knowledge maps, were devised. Then, a strategic knowledge map model was designed for the research and development department (hereinafter abbreviated as SKM – R&D in the manufacturing company, comprising the following components: (1 fields of knowledge, (2 internal and external processes in the R&D department, and (3 sources of knowledge. Then, a practical implementation of the SKM – R&D model was presented.

  2. Development and distribution of radon risk maps in New York State

    International Nuclear Information System (INIS)

    Kitto, M.E.; Kunz, C.O.; New York State Univ., Albany, NY; Green, J.G.

    2001-01-01

    Radon maps for each county in New York State have been developed on the township level indicating the percent of homes with ≥ 148 Bq/m 3 (4 pCi/l) in the indoor air of the basement and living area. Estimates are based on a combination of nearly 45,000 basement-screening measurements and correlations to surficial geology. Many of the towns and cities in the State with the highest average indoor radon concentrations are located on highly-permeable gravelly soils formed during the retreat of the Wisconsinan Glaciation. As many towns (32% of total) had ≤ 5 measurements, a project to obtain additional measurements in high-risk towns produced results comparable to estimates based on correlations to surficial geology. Radon risk maps for each county have been distributed to municipal governments, schools, and professionals in activities related to homes, buildings, and indoor air quality. (author)

  3. Integrative Literature Review: Concept Mapping--A Strategy to Support the Development of Practice, Research, and Theory within Human Resource Development

    Science.gov (United States)

    Daley, Barbara J.; Conceicao, Simone C. O.; Mina, Liliana; Altman, Brian A.; Baldor, Maria; Brown, James

    2010-01-01

    The purpose of this integrative literature review is to summarize research on concept mapping and to offer ideas on how concept mapping can facilitate practice, research, and theory development within human resource development. In this review, more than 300 articles, written in both English and Spanish, presented at two different concept mapping…

  4. Regional Geology Web Map Application Development: Javascript v2.0

    International Nuclear Information System (INIS)

    Russell, Glenn

    2017-01-01

    This is a milestone report for the FY2017 continuation of the Spent Fuel, Storage, and Waste, Technology (SFSWT) program (formerly Used Fuel Disposal (UFD) program) development of the Regional Geology Web Mapping Application by the Idaho National Laboratory Geospatial Science and Engineering group. This application was developed for general public use and is an interactive web-based application built in Javascript to visualize, reference, and analyze US pertinent geological features of the SFSWT program. This tool is a version upgrade from Adobe FLEX technology. It is designed to facilitate informed decision making of the geology of continental US relevant to the SFSWT program.

  5. Development of an updated fundamental basic wind speed map for SANS 10160-3

    CSIR Research Space (South Africa)

    Kruger, A

    2017-12-01

    Full Text Available winds is of car- dinal importance to the built environment, and should be updated as new information becomes available. A review of the historical development of climatic data for wind load design in South Africa is provided by Goliger et al (2017..., Goliger AM. Development of an updated fundamental basic wind speed map for SANS 10160-3. J. S. Afr. Inst. Civ. Eng. 2017:59(4), Art. #1739, 14 pages. http://dx.doi.org/10.17159/2309-8775/2017/v59n4a2 TECHNICAL PAPER Journal of the South african in...

  6. Regional Geology Web Map Application Development: Javascript v2.0

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Glenn [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-06-19

    This is a milestone report for the FY2017 continuation of the Spent Fuel, Storage, and Waste, Technology (SFSWT) program (formerly Used Fuel Disposal (UFD) program) development of the Regional Geology Web Mapping Application by the Idaho National Laboratory Geospatial Science and Engineering group. This application was developed for general public use and is an interactive web-based application built in Javascript to visualize, reference, and analyze US pertinent geological features of the SFSWT program. This tool is a version upgrade from Adobe FLEX technology. It is designed to facilitate informed decision making of the geology of continental US relevant to the SFSWT program.

  7. Development of a high-resolution binational vegetation map of the Santa Cruz River riparian corridor and surrounding watershed, southern Arizona and northern Sonora, Mexico

    Science.gov (United States)

    Wallace, Cynthia S.A.; Villarreal, Miguel L.; Norman, Laura M.

    2011-01-01

    This report summarizes the development of a binational vegetation map developed for the Santa Cruz Watershed, which straddles the southern border of Arizona and the northern border of Sonora, Mexico. The map was created as an environmental input to the Santa Cruz Watershed Ecosystem Portfolio Model (SCWEPM) that is being created by the U.S. Geological Survey for the watershed. The SCWEPM is a map-based multicriteria evaluation tool that allows stakeholders to explore tradeoffs between valued ecosystem services at multiple scales within a participatory decision-making process. Maps related to vegetation type and are needed for use in modeling wildlife habitat and other ecosystem services. Although detailed vegetation maps existed for the U.S. side of the border, there was a lack of consistent data for the Santa Cruz Watershed in Mexico. We produced a binational vegetation classification of the Santa Cruz River riparian habitat and watershed vegetation based on NatureServe Terrestrial Ecological Systems (TES) units using Classification And Regression Tree (CART) modeling. Environmental layers used as predictor data were derived from a seasonal set of Landsat Thematic Mapper (TM) images (spring, summer, and fall) and from a 30-meter digital-elevation-model (DEM) grid. Because both sources of environmental data are seamless across the international border, they are particularly suited to this binational modeling effort. Training data were compiled from existing field data for the riparian corridor and data collected by the NM-GAP (New Mexico Gap Analysis Project) team for the original Southwest Regional Gap Analysis Project (SWReGAP) modeling effort. Additional training data were collected from core areas of the SWReGAP classification itself, allowing the extrapolation of the SWReGAP mapping into the Mexican portion of the watershed without collecting additional training data.

  8. Development of a Florida Coastal Mapping Program Through Local and Regional Coordination

    Science.gov (United States)

    Hapke, C. J.; Kramer, P. A.; Fetherston-Resch, E.; Baumstark, R.

    2017-12-01

    The State of Florida has the longest coastline in the contiguous United States (2,170 km). The coastal zone is heavily populated and contains 1,900 km of sandy beaches that support economically important recreation and tourism. Florida's waters also host important marine mineral resources, unique ecosystems, and the largest number of recreational boats and saltwater fishermen in the country. There is increasing need and demand for high resolution data of the coast and adjacent seafloor for resource and habitat mapping, understanding coastal vulnerability, evaluating performance of restoration projects, and many other coastal and marine spatial planning efforts. The Florida Coastal Mapping Program (FCMP), initiated in 2017 as a regional collaboration between four federal and three state agencies, has goals of establishing the priorities for high resolution seafloor mapping of Florida's coastal environment, and developing a strategy for leveraging funds to support mapping priorities set by stakeholders. We began by creating a comprehensive digital inventory of existing data (collected by government, the private sector, and academia) from 1 kilometer inland to the 200 meter isobath for a statewide geospatial database and gap analysis. Data types include coastal topography, bathymetry, and acoustic data such as sidescan sonar and subbottom profiles. Next, we will develop appropriate proposals and legislative budget requests in response to opportunities to collect priority data in high priority areas. Data collection will be undertaken by a combination of state and federal agencies. The FCMP effort will provide the critical baseline information that is required for characterizing changes to fragile ecosystems, assessing marine resources, and forecasting the impacts on coastal infrastructure and recreational beaches from future storms and sea-level rise.

  9. Energy Development in Colorado's Pawnee National Grasslands: Mapping and Measuring the Disturbance Footprint of Renewables and Non-Renewables

    Science.gov (United States)

    Baynard, Chris W.; Mjachina, Ksenya; Richardson, Robert D.; Schupp, Robert W.; Lambert, J. David; Chibilyev, Alexander A.

    2017-06-01

    This paper examines the pattern and extent of energy development in steppe landscapes of northeast Colorado, United States. We compare the landscape disturbance created by oil and gas production to that of wind energy inside the Pawnee National Grasslands eastern side. This high-steppe landscape consists of a mosaic of federal, state, and private lands where dominant economic activities include ranching, agriculture, tourism, oil and gas extraction, and wind energy generation. Utilizing field surveys, remote sensing data and geographic information systems techniques, we quantify and map the footprint of energy development at the landscape level. Findings suggest that while oil and gas and wind energy development have resulted in a relatively small amount of habitat loss within the study area, the footprint stretches across the entire zone, fragmenting this mostly grassland habitat. Futhermore, a third feature of this landscape, the non-energy transportation network, was also found to have a significant impact. Combined, these three features fragment the entire Pawnee National Grasslands eastern side, leaving very few large intact core, or roadless areas. The primary objective of this ongoing work is to create a series of quantifiable and replicable surface disturbance indicators linked to energy production in semi-arid grassland environments. Based on these, and future results, we aim to work with industry and regulators to shape energy policy as it relates to environmental performance, with the aim of reducing the footprint and thus increasing the sustainability of these extractive activities.

  10. Fine resolution mapping of population age-structures for health and development applications.

    Science.gov (United States)

    Alegana, V A; Atkinson, P M; Pezzulo, C; Sorichetta, A; Weiss, D; Bird, T; Erbach-Schoenberg, E; Tatem, A J

    2015-04-06

    The age-group composition of populations varies considerably across the world, and obtaining accurate, spatially detailed estimates of numbers of children under 5 years is important in designing vaccination strategies, educational planning or maternal healthcare delivery. Traditionally, such estimates are derived from population censuses, but these can often be unreliable, outdated and of coarse resolution for resource-poor settings. Focusing on Nigeria, we use nationally representative household surveys and their cluster locations to predict the proportion of the under-five population in 1 × 1 km using a Bayesian hierarchical spatio-temporal model. Results showed that land cover, travel time to major settlements, night-time lights and vegetation index were good predictors and that accounting for fine-scale variation, rather than assuming a uniform proportion of under 5 year olds can result in significant differences in health metrics. The largest gaps in estimated bednet and vaccination coverage were in Kano, Katsina and Jigawa. Geolocated household surveys are a valuable resource for providing detailed, contemporary and regularly updated population age-structure data in the absence of recent census data. By combining these with covariate layers, age-structure maps of unprecedented detail can be produced to guide the targeting of interventions in resource-poor settings.

  11. Its4land - Challenges and Opportunities in Developing Innovative Geospatial Tools for Fit-For-Purpose Land Rights Mapping

    NARCIS (Netherlands)

    Koeva, M.N.; Crommelinck, S.; Stöcker, Claudia; Crompvoets, J.

    2018-01-01

    Mapping millions of unrecorded land rights in large parts of Sub-Saharan Africa remains a challenge. The results of many existing ICT-based approaches for recording these rights have often proven to be inappropriate; therefore, a new generation of tools needs to be developed to map land rights

  12. Survey of Noncommissioned Officer Academies for Criterion Development Purposes,

    Science.gov (United States)

    1961-12-01

    Inspection, Fitting and Wearing of the Uniform, Ceremonies, Customs and Courtesies, Conduct of Physical Training Program, etc. )--minimum of 15 hours. 3...in a course and covers the general responsibilities of leadership, problems of leader- subordinate relationships , and some of the leader’s specific...OPERATION AT INSTALLATIONS SURVEYED 3Y DA MILITARY PERSONNEL MANAGMNT TEAMS Type of Training Program Installation Refresher Leadership Instructor

  13. Developing an International Survey of Teachers' Assessment Capabilities

    DEFF Research Database (Denmark)

    Renken, Maggie; Otrel-Cass, Kathrin; Cowie, Bronwen

    teacher education into the first years as teachers across six countries. We target the nature of programmes and changes in understanding assessment purposes, practices, principles and policy. This project builds on the ACT survey of student-teacher understandings of assessment conducted over three years......Professional standards require teachers to be assessment literate - to construct, administer, and score reliable, valid assessments, communicate interpretations and use evidence to adjust teaching to support students. This project investigates student-teachers’ assessment literacy throughout...

  14. State of the art survey of network operating systems development

    Science.gov (United States)

    1985-01-01

    The results of the State-of-the-Art Survey of Network Operating Systems (NOS) performed for Goddard Space Flight Center are presented. NOS functional characteristics are presented in terms of user communication data migration, job migration, network control, and common functional categories. Products (current or future) as well as research and prototyping efforts are summarized. The NOS products which are revelant to the space station and its activities are evaluated.

  15. A Global Survey and Interactive Map Suite of Deep Underground Facilities; Examples of Geotechnical and Engineering Capabilities, Achievements, Challenges: (Mines, Shafts, Tunnels, Boreholes, Sites and Underground Facilities for Nuclear Waste and Physics R&D)

    Science.gov (United States)

    Tynan, M. C.; Russell, G. P.; Perry, F.; Kelley, R.; Champenois, S. T.

    2017-12-01

    This global survey presents a synthesis of some notable geotechnical and engineering information reflected in four interactive layer maps for selected: 1) deep mines and shafts; 2) existing, considered or planned radioactive waste management deep underground studies, sites, or disposal facilities; 3) deep large diameter boreholes, and 4) physics underground laboratories and facilities from around the world. These data are intended to facilitate user access to basic information and references regarding deep underground "facilities", history, activities, and plans. In general, the interactive maps and database [http://gis.inl.gov/globalsites/] provide each facility's approximate site location, geology, and engineered features (e.g.: access, geometry, depth, diameter, year of operations, groundwater, lithology, host unit name and age, basin; operator, management organization, geographic data, nearby cultural features, other). Although the survey is not all encompassing, it is a comprehensive review of many of the significant existing and historical underground facilities discussed in the literature addressing radioactive waste management and deep mined geologic disposal safety systems. The global survey is intended to support and to inform: 1) interested parties and decision makers; 2) radioactive waste disposal and siting option evaluations, and 3) safety case development as a communication tool applicable to any mined geologic disposal facility as a demonstration of historical and current engineering and geotechnical capabilities available for use in deep underground facility siting, planning, construction, operations and monitoring.

  16. Systematic Mapping Study of Information Technology for Development in Agriculture (The Case of Developing Countries)

    DEFF Research Database (Denmark)

    Zewge, Amanuel; Dittrich, Yvonne

    2017-01-01

    With its rapid proliferation in the developing world, information and communication technology (ICT) has been accepted as an opportunity to assist disadvantaged people. Many projects have piloted ICT supporting rural communities in developing countries. Such rural communities are socially complex...

  17. Using intervention mapping to develop a work-related guidance tool for those affected by cancer

    Directory of Open Access Journals (Sweden)

    Munir Fehmidah

    2013-01-01

    Full Text Available Abstract Background Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP. Methods The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the ‘gaps’ in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. Results The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Conclusions Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health

  18. Using intervention mapping to develop a work-related guidance tool for those affected by cancer.

    Science.gov (United States)

    Munir, Fehmidah; Kalawsky, Katryna; Wallis, Deborah J; Donaldson-Feilder, Emma

    2013-01-05

    Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP). The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the 'gaps' in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health-care based.

  19. Brain tumors in eloquent areas: A European multicenter survey of intraoperative mapping techniques, intraoperative seizures occurrence, and antiepileptic drug prophylaxis.

    Science.gov (United States)

    Spena, Giannantonio; Schucht, Philippe; Seidel, Kathleen; Rutten, Geert-Jan; Freyschlag, Christian Franz; D'Agata, Federico; Costi, Emanule; Zappa, Francesca; Fontanella, Marco; Fontaine, Denys; Almairac, Fabien; Cavallo, Michele; De Bonis, Pasquale; Conesa, Gerardo; Foroglou, Nicholas; Gil-Robles, Santiago; Mandonnet, Emanuel; Martino, Juan; Picht, Thomas; Viegas, Catarina; Wager, Michel; Pallud, Johan

    2017-04-01

    Intraoperative mapping and monitoring techniques for eloquent area tumors are routinely used world wide. Very few data are available regarding mapping and monitoring methods and preferences, intraoperative seizures occurrence and perioperative antiepileptic drug management. A questionnaire was sent to 20 European centers with experience in intraoperative mapping or neurophysiological monitoring for the treatment of eloquent area tumors. Fifteen centers returned the completed questionnaires. Data was available on 2098 patients. 863 patients (41.1%) were operated on through awake surgery and intraoperative mapping, while 1235 patients (58.8%) received asleep surgery and intraoperative electrophysiological monitoring or mapping. There was great heterogeneity between centers with some totally AW oriented (up to 100%) and other almost totally ASL oriented (up to 92%) (31% SD). For awake surgery, 79.9% centers preferred an asleep-awake-asleep anesthesia protocol. Only 53.3% of the centers used ECoG or transcutaneous EEG. The incidence of intraoperative seizures varied significantly between centers, ranging from 2.5% to 54% (p mapping technique and the risk of intraoperative seizures. Moreover, history of preoperative seizures can significantly increase the risk of intraoperative seizures (p mapping and monitoring protocols and the management of peri- and intraoperative seizures. This data can help identify specific aspects that need to be investigated in prospective and controlled studies.

  20. Mapping plastic greenhouse with medium spatial resolution satellite data: Development of a new spectral index

    Science.gov (United States)

    Yang, Dedi; Chen, Jin; Zhou, Yuan; Chen, Xiang; Chen, Xuehong; Cao, Xin

    2017-06-01

    Plastic greenhouses (PGs) are an important agriculture development technique to protect and control the growing environment for food crops. The extensive use of PGs can change the agriculture landscape and affects the local environment. Accurately mapping and estimating the coverage of PGs is a necessity to the strategic planning of modern agriculture. Unfortunately, PG mapping over large areas is methodologically challenging, as the medium spatial resolution satellite imagery (such as Landsat data) used for analysis lacks spatial details and spectral variations. To fill the gap, the paper proposes a new plastic greenhouse index (PGI) based on the spectral, sensitivity, and separability analysis of PGs using medium spatial resolution images. In the context of the Landsat Enhanced Thematic Mapper Plus (ETM+) imagery, the paper examines the effectiveness and capability of the proposed PGI. The results indicate that PGs in Landsat ETM+ image can be successfully detected by the PGI if the PG fraction is greater than 12% in a mixed pixel. A kappa coefficient of 0.83 and overall accuracy of 91.2% were achieved when applying the proposed PGI in the case of Weifang District, Shandong, China. These results show that the proposed index can be applied to identifying transparent PGs in atmospheric corrected Landsat image and has the potential for the digital mapping of plastic greenhouse coverage over a large area.

  1. Map of dermatology: 'first-impression' user feedback and agenda for further development.

    Science.gov (United States)

    Kamel Boulos, Maged N

    2006-09-01

    Map of Dermatology (http://healthcybermap.org/dermap/) is a free web resource that enables users to search for images of skin conditions by body region and morphology rather than by condition name, which is much more useful and natural in answering questions about unknown clinical presentations/diagnoses, especially for non-specialists. This paper presents responses received from twelve users, including specialist dermatologists, non-specialists (some with interests in health informatics), and lay persons, who provided their 'first-impression' feedback on Map of Dermatology by responding to a very short e-mail questionnaire covering service usefulness and interface usability. The paper also provides a brief review of the gaps in current online dermatology information service provision in general. The overall user feedback received was very positive. An exploratory discussion of the arguments and possibilities for radically improving Map of Dermatology to produce 'the ultimate web-based dermatology diagnostic tool' is also provided, together with some desiderata and preliminary 'design and feature specifications' for such a tool based on users' suggestions, the gaps highlighted in other existing online dermatology tools, and the author's own reflections and experience. When successfully developed, the proposed tool is expected to have significant potential for efficiently and effectively addressing many of the currently unmet educational needs of clinicians.

  2. Development of mapped stress-field boundary conditions based on a Hill-type muscle model.

    Science.gov (United States)

    Cardiff, P; Karač, A; FitzPatrick, D; Flavin, R; Ivanković, A

    2014-09-01

    Forces generated in the muscles and tendons actuate the movement of the skeleton. Accurate estimation and application of these musculotendon forces in a continuum model is not a trivial matter. Frequently, musculotendon attachments are approximated as point forces; however, accurate estimation of local mechanics requires a more realistic application of musculotendon forces. This paper describes the development of mapped Hill-type muscle models as boundary conditions for a finite volume model of the hip joint, where the calculated muscle fibres map continuously between attachment sites. The applied muscle forces are calculated using active Hill-type models, where input electromyography signals are determined from gait analysis. Realistic muscle attachment sites are determined directly from tomography images. The mapped muscle boundary conditions, implemented in a finite volume structural OpenFOAM (ESI-OpenCFD, Bracknell, UK) solver, are employed to simulate the mid-stance phase of gait using a patient-specific natural hip joint, and a comparison is performed with the standard point load muscle approach. It is concluded that physiological joint loading is not accurately represented by simplistic muscle point loading conditions; however, when contact pressures are of sole interest, simplifying assumptions with regard to muscular forces may be valid. Copyright © 2014 John Wiley & Sons, Ltd.

  3. Using concept mapping for faculty development in the context of pedagogic frailty

    Directory of Open Access Journals (Sweden)

    Bárbara de Benito

    2017-09-01

    Full Text Available The quality of teaching does not depend exclusively on the knowledge and experience of teachers, but also on the contextual variables that go along with the teaching (attitude, objectives, students, resources, etc. or dimensions of pedagogic frailty (regulative and instructional discourse, pedagogy and discipline, research teaching nexus and locus of control. Identifying these variables may help to enhance teaching. A procedure for the capture, representation and transfer of knowledge between peers regarding active didactic methodologies supported by Information and Communication Technologies (ICT was applied in a case study research. The data were represented by concept maps. The aim was to identify variables that affect Technological Pedagogical Content Knowledge (TPACK, the use of technology in teaching and pedagogic frailty, through the analysis of the interrelations among the concept maps.The analysis of the maps shows the implementation of many innovations with ICT (project-based learning, service-learning, collaborative learning, their positive aspects and the difficulties in carrying them out. The teachers involved pointed out some factors that contribute to the development of pedagogic frailty, including the number of students in each class, the organization of teaching, the motivation, among others, and as conditions for a greater progress in innovative educational experiments using ICT.

  4. Market survey for nuclear power in developing countries. Jamaica

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  5. Market survey for nuclear power in developing countries. Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  6. Market survey for nuclear power in developing countries. Pakistan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  7. Market survey for nuclear power in developing countries. Jamaica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  8. Market survey for nuclear power in developing countries. Singapore

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  9. Market survey for nuclear power in developing countries. Thailand

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  10. Market survey for nuclear power in developing countries. Thailand

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  11. Market survey for nuclear power in developing countries. Bangladesh

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  12. Market survey for nuclear power in developing countries. Pakistan

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  13. Market survey for nuclear power in developing countries. Singapore

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  14. Very high precision survey equipment for great distances Surface surveys used to map out the surface network and the tunnelling machines then gyroscopically steered underground.

    CERN Document Server

    1983-01-01

    At the beginning of the 1980s, CERN embarked on the enormous Large Electron-Positron Collider construction project. The excavation of the 27-kilometre LEP tunnel was a huge technical challenge. The tunnel-boring machines excavated the tunnel in 3.3 km octants and had to be operated with extraordinary precision to ensure that they reached their destination - the bottom of the next vertical shaft - precisely on target. The tunnel was excavated before high-performance instruments were developed for the construction of the Channel Tunnel. As no firms were willing to perform the surveying work, CERN's own surveyors, with experience from the SPS behind them, took up the challenge. At the surface, the surveyors established the world's most accurate geodetic network, performing measurements to an accuracy of 10-7, or 1mm per 10 km, using the Terrameter (see photo). The excavation of the tunnel was completed in 1988 and the finished tunnel's trajectory was found to diverge from the theoretical value specified by the p...

  15. Fiscal 1999 geothermal development promotion survey. Development potentiality survey - Strategic survey/nation-wide survey (Report on districts in Fukushima Prefecture); 1999 nendo chinetsu kaihatsu sokushin chosa. Kaihatsu kanosei chosa - senryakuteki chosa zenkoku chosa (Fukushimaken chiiki hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-08-01

    For the effective implementation of the survey, data in existence were reanalyzed for the Bandai-Azuma district and Minami-Aizu/Nasu district, and a wide area geothermal model was built. Using the model, exploitable resources were assessed and a prioritized survey introduction program was worked out for the promotion of geothermal development. In compliance with the strategic survey implementation manual, the Bandai-Azuma district was assessed, and the northeastern-eastern foot area of Azuma Volcano and the northern foot area of Adatara Volcano were extracted as areas promising geothermal energy development. The Monte Carlo method was applied to the prioritized survey area at the northeastern foot of Azuma Volcano, and then it was estimated that, with a probability of not less than 90%, the exploitable resources would be 6.4MWe in the case of data accuracy of 0.5 or more and 12.0MWe in the case of data accuracy of 0.4 or more. Selected as promising areas in the Minami-Aizu/Nasu district were the Yanaizu-Nishiyama area, the neighborhood of Nasudake-Chausudake, and the neighborhood of Shiobara-Fuji. (NEDO)

  16. Fiscal 1999 geothermal development promotion survey. Development potentiality survey - Strategic survey/nation-wide survey (Report on Hokkaido region); 1999 nendo chinetsu kaihatsu sokushin chosa. Kaihatsu kanosei chosa - senryakuteki chosa zenkoku chosa (Hokkaido chiiki hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-08-01

    For the effective implementation of the survey, an analysis was conducted into areas expected to be successfully developed for geothermal energy, and promising areas and prioritized survey areas were selected. Data then in existence were collected at the Doto district 1, Doto district 2, Toyoha-Niseko district, and the Iburi district and subjected to reanalysis, and a wide area geothermal system conceptual model was built. Using the model, development-promising areas were extracted, the amount of resources was assessed, and an optimum survey program was prepared. One promising area was selected in the Doto district 1, four in the Doto district 2, two in the Toyoha-Niseko district, and one in the Iburi district. As prioritized survey areas, Musadake was selected in the Doto district 1; Yoichidake, Yunosawa, and Takinosawa in the Toyoha-Niseko district; and Raibadake in the Iburi district. A Monte Carlo analysis was conducted, and the result indicated that Musakake had 93-121MWe in resources of which 55MWe would be exploitable with a probability of not less than 90%. (NEDO)

  17. Use of GPS and GIS technology in surveying and mapping of wheat and cotton weeds in Khairpur district, Sindh, Pakistan

    International Nuclear Information System (INIS)

    Memon, R.A.; Khalid, S.; Mallah, A.

    2011-01-01

    Present study was conducted in the fields of Khairpur district, Sindh for the mapping of some important weeds of wheat and cotton by using GPS and GIS technology. A base map of the district was prepared by using Geographical Information System (GIS) to indicate the sampling sites and physical features of the area. Two more maps were created to depict the density and frequency of weeds of wheat and cotton crops in each Tehsil (Taluka), shown in the form of bar and pie diagrams. Present piece of work will help the scientists and managers to predict those areas, potentially subjected to weed invasion. (author)

  18. Development and bin mapping of a Rosaceae Conserved Ortholog Set (COS) of markers.

    Science.gov (United States)

    Cabrera, Antonio; Kozik, Alex; Howad, Werner; Arus, Pere; Iezzoni, Amy F; van der Knaap, Esther

    2009-11-29

    Detailed comparative genome analyses within the economically important Rosaceae family have not been conducted. This is largely due to the lack of conserved gene-based molecular markers that are transferable among the important crop genera within the family [e.g. Malus (apple), Fragaria (strawberry), and Prunus (peach, cherry, apricot and almond)]. The lack of molecular markers and comparative whole genome sequence analysis for this family severely hampers crop improvement efforts as well as QTL confirmation and validation studies. We identified a set of 3,818 rosaceaous unigenes comprised of two or more ESTs that correspond to single copy Arabidopsis genes. From this Rosaceae Conserved Orthologous Set (RosCOS), 1039 were selected from which 857 were used for the development of intron-flanking primers and allele amplification. This led to successful amplification and subsequent mapping of 613 RosCOS onto the Prunus TxE reference map resulting in a genome-wide coverage of 0.67 to 1.06 gene-based markers per cM per linkage group. Furthermore, the RosCOS primers showed amplification success rates from 23 to 100% across the family indicating that a substantial part of the RosCOS primers can be directly employed in other less studied rosaceaous crops. Comparisons of the genetic map positions of the RosCOS with the physical locations of the orthologs in the Populus trichocarpa genome identified regions of colinearity between the genomes of Prunus-Rosaceae and Populus-Salicaceae. Conserved orthologous genes are extremely useful for the analysis of genome evolution among closely and distantly related species. The results presented in this study demonstrate the considerable potential of the mapped Prunus RosCOS for genome-wide marker employment and comparative whole genome studies within the Rosaceae family. Moreover, these markers will also function as useful anchor points for the genome sequencing efforts currently ongoing in this family as well as for comparative QTL

  19. Isotropic three-dimensional T2 mapping of knee cartilage: Development and validation.

    Science.gov (United States)

    Colotti, Roberto; Omoumi, Patrick; Bonanno, Gabriele; Ledoux, Jean-Baptiste; van Heeswijk, Ruud B

    2018-02-01

    1) To implement a higher-resolution isotropic 3D T 2 mapping technique that uses sequential T 2 -prepared segmented gradient-recalled echo (Iso3DGRE) images for knee cartilage evaluation, and 2) to validate it both in vitro and in vivo in healthy volunteers and patients with knee osteoarthritis. The Iso3DGRE sequence with an isotropic 0.6 mm spatial resolution was developed on a clinical 3T MR scanner. Numerical simulations were performed to optimize the pulse sequence parameters. A phantom study was performed to validate the T 2 estimation accuracy. The repeatability of the sequence was assessed in healthy volunteers (n = 7). T 2 values were compared with those from a clinical standard 2D multislice multiecho (MSME) T 2 mapping sequence in knees of healthy volunteers (n = 13) and in patients with knee osteoarthritis (OA, n = 5). The numerical simulations resulted in 100 excitations per segment and an optimal radiofrequency (RF) excitation angle of 15°. The phantom study demonstrated a good correlation of the technique with the reference standard (slope 0.9 ± 0.05, intercept 0.2 ± 1.7 msec, R 2 ≥ 0.99). Repeated measurements of cartilage T 2 values in healthy volunteers showed a coefficient of variation of 5.6%. Both Iso3DGRE and MSME techniques found significantly higher cartilage T 2 values (P < 0.03) in OA patients. Iso3DGRE precision was equal to that of the MSME T 2 mapping in healthy volunteers, and significantly higher in OA (P = 0.01). This study successfully demonstrated that high-resolution isotropic 3D T 2 mapping for knee cartilage characterization is feasible, accurate, repeatable, and precise. The technique allows for multiplanar reformatting and thus T 2 quantification in any plane of interest. 1 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2018;47:362-371. © 2017 International Society for Magnetic Resonance in Medicine.

  20. Rising to the Challenge: Developing a Survey of Workplace Skills, Civic Engagement, and Global Awareness

    Science.gov (United States)

    Ouimet, Judith A.; Pike, Gary R.

    2008-01-01

    This chapter describes the ongoing development of a survey of students' workplace skills, civic engagement, and global awareness that colleges and universities can use to document their contributions to the public good. The student growth survey currently under development offers colleges and universities an opportunity to refocus the attention of…

  1. Development of the Social Network-Based Intervention "Powerful Together with Diabetes" Using Intervention Mapping.

    Science.gov (United States)

    Vissenberg, Charlotte; Nierkens, Vera; Uitewaal, Paul J M; Middelkoop, Barend J C; Nijpels, Giel; Stronks, Karien

    2017-01-01

    This article describes the development of the social network-based intervention Powerful Together with Diabetes which aims to improve diabetes self-management (DSM) among patients with type 2 diabetes living in socioeconomically deprived neighborhoods by stimulating social support for DSM and diminishing social influences hindering DSM (e.g., peer pressure and social norms). The intervention was specifically developed for patients with Dutch, Turkish, Moroccan, and Surinamese backgrounds. The intervention was developed according to Intervention Mapping. This article describes the first four steps of Intervention Mapping: (1) the needs assessment; (2) development of performance and change objectives; (3) selection of theory-based methods and strategies; and (4) the translation of these into an organized program. These four steps resulted in Powerful Together with Diabetes , a 10-month group-based intervention consisting of 24 meetings, 6 meetings for significant others, and 2 meetings for participants and their spouses. The IM method resulted in a tailored approach with a specific focus on the social networks of its participants. This article concludes that the IM method helped our planning team to tailor the intervention to the needs of our target population and facilitated our evaluation design. However, in hindsight, the intervention could have been improved by investing more in participatory planning and community involvement.

  2. Using the intervention mapping protocol to develop a maintenance programme for the SLIMMER diabetes prevention intervention.

    Science.gov (United States)

    Elsman, Ellen B M; Leerlooijer, Joanne N; Ter Beek, Josien; Duijzer, Geerke; Jansen, Sophia C; Hiddink, Gerrit J; Feskens, Edith J M; Haveman-Nies, Annemien

    2014-10-27

    Although lifestyle interventions have shown to be effective in reducing the risk for type 2 diabetes mellitus, maintenance of achieved results is difficult, as participants often experience relapse after the intervention has ended. This paper describes the systematic development of a maintenance programme for the extensive SLIMMER intervention, an existing diabetes prevention intervention for high-risk individuals, implemented in a real-life setting in the Netherlands. The maintenance programme was developed using the Intervention Mapping protocol. Programme development was informed by a literature study supplemented by various focus group discussions and feedback from implementers of the extensive SLIMMER intervention. The maintenance programme was designed to sustain a healthy diet and physical activity pattern by targeting knowledge, attitudes, subjective norms and perceived behavioural control of the SLIMMER participants. Practical applications were clustered into nine programme components, including sports clinics at local sports clubs, a concluding meeting with the physiotherapist and dietician, and a return session with the physiotherapist, dietician and physical activity group. Manuals were developed for the implementers and included a detailed time table and step-by-step instructions on how to implement the maintenance programme. The Intervention Mapping protocol provided a useful framework to systematically plan a maintenance programme for the extensive SLIMMER intervention. The study showed that planning a maintenance programme can build on existing implementation structures of the extensive programme. Future research is needed to determine to what extent the maintenance programme contributes to sustained effects in participants of lifestyle interventions.

  3. Implementing Dementia Care Mapping as a practice development tool in dementia care services: a systematic review

    Directory of Open Access Journals (Sweden)

    Surr CA

    2018-01-01

    Full Text Available Claire A Surr, Alys W Griffiths, Rachael Kelley Centre for Dementia Research, School of Health and Community Studies, Leeds Beckett University, Leeds, UK Abstract: Dementia Care Mapping (DCM is an observational tool set within a practice development process. Following training in the method, DCM is implemented via a cyclic process of briefing staff, conducting mapping observations, data analysis and report preparation, feedback to staff and action planning. Recent controlled studies of DCM’s efficacy have found heterogeneous results, and variability in DCM implementation has been indicated as a potential contributing factor. This review aimed to examine the primary research evidence on the processes and the barriers and facilitators to implementing DCM as a practice development method within formal dementia care settings. PUBMED, PsycINFO, CINAHL, The Cochrane Library-Cochrane reviews, HMIC (Ovid, Web of Science and Social Care Online were searched using the term “Dementia Care Mapping”. Inclusion criterion was primary research studies in any formal dementia care settings where DCM was used as a practice development tool and which included discussion/critique of the implementation processes. Assessment of study quality was conducted using the Mixed Methods Appraisal Tool. Twelve papers were included in the review, representing nine research studies. The papers included discussion of various components of the DCM process, including mapper selection and preparation; mapping observations; data analysis, report writing and feedback; and action planning. However, robust evidence on requirements for successful implementation of these components was limited. Barriers and facilitators to mapping were also discussed. The review found some consensus that DCM is more likely to be successfully implemented if the right people are selected to be trained as mappers, with appropriate mapper preparation and ongoing support and with effective leadership for

  4. Development and mapping of DArT markers within the Festuca - Lolium complex

    Directory of Open Access Journals (Sweden)

    Studer Bruno

    2009-10-01

    Full Text Available Abstract Background Grasses are among the most important and widely cultivated plants on Earth. They provide high quality fodder for livestock, are used for turf and amenity purposes, and play a fundamental role in environment protection. Among cultivated grasses, species within the Festuca-Lolium complex predominate, especially in temperate regions. To facilitate high-throughput genome profiling and genetic mapping within the complex, we have developed a Diversity Arrays Technology (DArT array for five grass species: F. pratensis, F. arundinacea, F. glaucescens, L. perenne and L. multiflorum. Results The DArTFest array contains 7680 probes derived from methyl-filtered genomic representations. In a first marker discovery experiment performed on 40 genotypes from each species (with the exception of F. glaucescens for which only 7 genotypes were used, we identified 3884 polymorphic markers. The number of DArT markers identified in every single genotype varied from 821 to 1852. To test the usefulness of DArTFest array for physical mapping, DArT markers were assigned to each of the seven chromosomes of F. pratensis using single chromosome substitution lines while recombinants of F. pratensis chromosome 3 were used to allocate the markers to seven chromosome bins. Conclusion The resources developed in this project will facilitate the development of genetic maps in Festuca and Lolium, the analysis on genetic diversity, and the monitoring of the genomic constitution of the Festuca × Lolium hybrids. They will also enable marker-assisted selection for multiple traits or for specific genome regions.

  5. High resolution mapping of development in the wildland-urban interface using object based image extraction

    Science.gov (United States)

    Caggiano, Michael D.; Tinkham, Wade T.; Hoffman, Chad; Cheng, Antony S.; Hawbaker, Todd J.

    2016-01-01

    The wildland-urban interface (WUI), the area where human development encroaches on undeveloped land, is expanding throughout the western United States resulting in increased wildfire risk to homes and communities. Although census based mapping efforts have provided insights into the pattern of development and expansion of the WUI at regional and national scales, these approaches do not provide sufficient detail for fine-scale fire and emergency management planning, which requires maps of individual building locations. Although fine-scale maps of the WUI have been developed, they are often limited in their spatial extent, have unknown accuracies and biases, and are costly to update over time. In this paper we assess a semi-automated Object Based Image Analysis (OBIA) approach that utilizes 4-band multispectral National Aerial Image Program (NAIP) imagery for the detection of individual buildings within the WUI. We evaluate this approach by comparing the accuracy and overall quality of extracted buildings to a building footprint control dataset. In addition, we assessed the effects of buffer distance, topographic conditions, and building characteristics on the accuracy and quality of building extraction. The overall accuracy and quality of our approach was positively related to buffer distance, with accuracies ranging from 50 to 95% for buffer distances from 0 to 100 m. Our results also indicate that building detection was sensitive to building size, with smaller outbuildings (footprints less than 75 m2) having detection rates below 80% and larger residential buildings having detection rates above 90%. These findings demonstrate that this approach can successfully identify buildings in the WUI in diverse landscapes while achieving high accuracies at buffer distances appropriate for most fire management applications while overcoming cost and time constraints associated with traditional approaches. This study is unique in that it evaluates the ability of an OBIA

  6. High resolution mapping of development in the wildland-urban interface using object based image extraction

    Directory of Open Access Journals (Sweden)

    Michael D. Caggiano

    2016-10-01

    Full Text Available The wildland-urban interface (WUI, the area where human development encroaches on undeveloped land, is expanding throughout the western United States resulting in increased wildfire risk to homes and communities. Although census based mapping efforts have provided insights into the pattern of development and expansion of the WUI at regional and national scales, these approaches do not provide sufficient detail for fine-scale fire and emergency management planning, which requires maps of individual building locations. Although fine-scale maps of the WUI have been developed, they are often limited in their spatial extent, have unknown accuracies and biases, and are costly to update over time. In this paper we assess a semi-automated Object Based Image Analysis (OBIA approach that utilizes 4-band multispectral National Aerial Image Program (NAIP imagery for the detection of individual buildings within the WUI. We evaluate this approach by comparing the accuracy and overall quality of extracted buildings to a building footprint control dataset. In addition, we assessed the effects of buffer distance, topographic conditions, and building characteristics on the accuracy and quality of building extraction. The overall accuracy and quality of our approach was positively related to buffer distance, with accuracies ranging from 50 to 95% for buffer distances from 0 to 100 m. Our results also indicate that building detection was sensitive to building size, with smaller outbuildings (footprints less than 75 m2 having detection rates below 80% and larger residential buildings having detection rates above 90%. These findings demonstrate that this approach can successfully identify buildings in the WUI in diverse landscapes while achieving high accuracies at buffer distances appropriate for most fire management applications while overcoming cost and time constraints associated with traditional approaches. This study is unique in that it evaluates the ability

  7. Single-edition quadrangle maps

    Science.gov (United States)

    ,

    1998-01-01

    In August 1993, the U.S. Geological Survey's (USGS) National Mapping Division and the U.S. Department of Agriculture's Forest Service signed an Interagency Agreement to begin a single-edition joint mapping program. This agreement established the coordination for producing and maintaining single-edition primary series topographic maps for quadrangles containing National Forest System lands. The joint mapping program saves money by eliminating duplication of effort by the agencies and results in a more frequent revision cycle for quadrangles containing national forests. Maps are revised on the basis of jointly developed standards and contain normal features mapped by the USGS, as well as additional features required for efficient management of National Forest System lands. Single-edition maps look slightly different but meet the content, accuracy, and quality criteria of other USGS products. The Forest Service is responsible for the land management of more than 191 million acres of land throughout the continental United States, Alaska, and Puerto Rico, including 155 national forests and 20 national grasslands. These areas make up the National Forest System lands and comprise more than 10,600 of the 56,000 primary series 7.5-minute quadrangle maps (15-minute in Alaska) covering the United States. The Forest Service has assumed responsibility for maintaining these maps, and the USGS remains responsible for printing and distributing them. Before the agreement, both agencies published similar maps of the same areas. The maps were used for different purposes, but had comparable types of features that were revised at different times. Now, the two products have been combined into one so that the revision cycle is stabilized and only one agency revises the maps, thus increasing the number of current maps available for National Forest System lands. This agreement has improved service to the public by requiring that the agencies share the same maps and that the maps meet a

  8. Benthic Surveys for Ground Truthing of Coastal Benthic Mapping in the Main Eight Hawaiian Islands 2001 - 2002 (NODC Accession 0001329)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Oceanic and Atmospheric Administration (NOAA) National Ocean Service (NOS) initiated a coral reef research program in 1999 to map, assess, inventory,...

  9. Aerial radiometric and magnetic survey; Brushy Basin detail survey: Price/Salina national topographic map sheets, Utah. Volume IV. Area III: graphic data. Final report

    International Nuclear Information System (INIS)

    1981-01-01

    This volume contains all the graphic data for Area III, which includes lines 3420 to 5320 and tie lines 6080, 6100, and 6140. Due to the large map scale of the data presented (1:62,500), this area was further subdivided into eleven 7-1/2 min quadrant sheets

  10. A program development tool for KEK VME-MAP control system

    International Nuclear Information System (INIS)

    Nakagawa, H.; Katoh, T.; Kadokura, E.; Akiyama, A.; Nigorikawa, K.; Ishii, K.

    1992-01-01

    The control system for KEK 12 GeV Proton Synchrotron has been replaced with a distributed VME-bus based microcomputer system and a MAP local area network. In order to simplify programming for network application tasks, a set of a preprocessor for a PASCAL compiler and a network communication server has been developed. Application programs for accelerator control system have blocks with similar codes; sending, waiting for, receiving, analyzing messages, etc. The preprocessor called 'OBJP' incorporates such common codes into the source code written by an application programmer. In case of a simple program, the size of the source code is reduced by one tenth of a full coding. (author)

  11. Development of NDT simulator with method of mapping for detection of pipe wall thinning using EMAT

    International Nuclear Information System (INIS)

    Yamaguchi, Hiroshi; Kojima, Fumio; Kosaka, Daigo

    2009-01-01

    This paper is concerned with a simulator related to nondestructive test using Electromagnetic Acoustic Transducer (EMAT). The simulator developed here can be applied to pipe wall thinning of stainless steel used in nuclear power plants. First, mathematical models for the inspection are given by a transient eddy current equation and by a time dependent elastic wave equation in two dimensions. Secondly, shape of pipe wall thinning is modeled by B-spline function and is applied to the mathematical models using method of mapping. Finally, the validity of the proposed simulator is shown through numerical experiment. (author)

  12. Mapping the ocean current strength and persistence in the Agulhas to inform marine energy development

    CSIR Research Space (South Africa)

    Meyer, I

    2017-04-01

    Full Text Available sensing - Acoustic Doppler Current Profiler - Natal pulses U N C O R R EC TE D PR O O F 1 Mapping the Ocean Current Strength 2 and Persistence in the Agulhas to Inform 3 Marine Energy Development 4 I. Meyer, L. Braby, M. Krug and B. Backeberg 5... International Publishing AG 2017 Z. Yang and A. Copping (eds.), Marine Renewable Energy, DOI 10.1007/978-3-319-53536-4_8 1 A u th o r P ro o f U N C O R R EC TE D PR O O F 16 Current. Western boundary ocean currents have become an area of focus (Duerr and 17...

  13. The applicability of space imagery to the small-scale topographic mapping of developing countries: A case study — the Sudan

    Science.gov (United States)

    Petrie, G.; El Niweiri, A. E. H.

    After reviewing the current status of topographic mapping in Sudan, the paper considers the possible applications of space inagery to the topographic mapping of the country at 1 : 100,000 scale. A comprehensive series of tests of the geometric accuracy and interpretability of six types of space imagery taken by the Landsat MSS, RBV and TM sensors, the MOMS scanner, the ESA Metric Camera and NASA's Large Format Camera have been conducted over a test area established in the Red Sea Hills area of Sudan supplemented by further interpretation tests carried out over the area of Khartoum and the Gezira. The results of these tests are given together with those from comparative tests carried out with other images acquired by the same sensors over test areas in developed countries (UK and USA). Further collateral information on topographic mapping at 1 : 100,000 scale from SPOT imagery has been provided by the Ordnance Survey based on its tests and experience in North Yemen. The paper concludes with an analysis of the possibilities of mapping the main (non-equatorial) area of Sudan at 1 : 100,000 scale based on the results of the extensive series of tests reported in the paper and elsewhere. Consideration is also given to the infrastructure required to support such a programme.

  14. Multitemporal Snow Cover Mapping in Mountainous Terrain for Landsat Climate Data Record Development

    Science.gov (United States)

    Crawford, Christopher J.; Manson, Steven M.; Bauer, Marvin E.; Hall, Dorothy K.

    2013-01-01

    A multitemporal method to map snow cover in mountainous terrain is proposed to guide Landsat climate data record (CDR) development. The Landsat image archive including MSS, TM, and ETM+ imagery was used to construct a prototype Landsat snow cover CDR for the interior northwestern United States. Landsat snow cover CDRs are designed to capture snow-covered area (SCA) variability at discrete bi-monthly intervals that correspond to ground-based snow telemetry (SNOTEL) snow-water-equivalent (SWE) measurements. The June 1 bi-monthly interval was selected for initial CDR development, and was based on peak snowmelt timing for this mountainous region. Fifty-four Landsat images from 1975 to 2011 were preprocessed that included image registration, top-of-the-atmosphere (TOA) reflectance conversion, cloud and shadow masking, and topographic normalization. Snow covered pixels were retrieved using the normalized difference snow index (NDSI) and unsupervised classification, and pixels having greater (less) than 50% snow cover were classified presence (absence). A normalized SCA equation was derived to independently estimate SCA given missing image coverage and cloud-shadow contamination. Relative frequency maps of missing pixels were assembled to assess whether systematic biases were embedded within this Landsat CDR. Our results suggest that it is possible to confidently estimate historical bi-monthly SCA from partially cloudy Landsat images. This multitemporal method is intended to guide Landsat CDR development for freshwaterscarce regions of the western US to monitor climate-driven changes in mountain snowpack extent.

  15. ANALYSIS, THEMATIC MAPS AND DATA MINING FROM POINT CLOUD TO ONTOLOGY FOR SOFTWARE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    R. Nespeca

    2016-06-01

    Full Text Available The primary purpose of the survey for the restoration of Cultural Heritage is the interpretation of the state of building preservation. For this, the advantages of the remote sensing systems that generate dense point cloud (range-based or image-based are not limited only to the acquired data. The paper shows that it is possible to extrapolate very useful information in diagnostics using spatial annotation, with the use of algorithms already implemented in open-source software. Generally, the drawing of degradation maps is the result of manual work, so dependent on the subjectivity of the operator. This paper describes a method of extraction and visualization of information, obtained by mathematical procedures, quantitative, repeatable and verifiable. The case study is a part of the east facade of the Eglise collégiale Saint-Maurice also called Notre Dame des Grâces, in Caromb, in southern France. The work was conducted on the matrix of information contained in the point cloud asci format. The first result is the extrapolation of new geometric descriptors. First, we create the digital maps with the calculated quantities. Subsequently, we have moved to semi-quantitative analyses that transform new data into useful information. We have written the algorithms for accurate selection, for the segmentation of point cloud, for automatic calculation of the real surface and the volume. Furthermore, we have created the graph of spatial distribution of the descriptors. This work shows that if we work during the data processing we can transform the point cloud into an enriched database: the use, the management and the data mining is easy, fast and effective for everyone involved in the restoration process.

  16. Study of the variation of the nuclear transcriptional map during de initial development of Drosophyla melanogaster embryos

    International Nuclear Information System (INIS)

    Alonso, C.E.V.

    1987-01-01

    The variation of nuclear transcriptional map during the initial development of Drosophyla melanogaster embryos were studied. Thermic treatment, chromatographic techniques and liquid scintilation in embryos inoculated with radioactive uridine were used. (L.J.C.)

  17. Mapping industrial networks as an approach to identify inter-organisational collaborative potential in new product development

    DEFF Research Database (Denmark)

    Parraguez, Pedro; Maier, Anja

    2012-01-01

    . Consequently, identifying and selecting potential partners to establish collaboration agreements can be a key activity in the new product development process. This paper explores the implications of mapping industrial networks with the purpose of identifying inter-organisational collaborative potential...

  18. Development of a Postnatal Educational Program for Breastfeeding Mothers in Community Settings: Intervention Mapping a useful guide

    DEFF Research Database (Denmark)

    Kronborg, Hanne; Kok, Gerjo

    2011-01-01

    Inconsistency in how professionals can best support the breastfeeding mother after discharge call on further investigation. The authors describe how intervention mapping was used to develop a postnatal breastfeeding support intervention for mothers in community settings. Breastfeeding cessation...

  19. Design, Development and Testing of Web Services for Multi-Sensor Snow Cover Mapping

    Science.gov (United States)

    Kadlec, Jiri

    This dissertation presents the design, development and validation of new data integration methods for mapping the extent of snow cover based on open access ground station measurements, remote sensing images, volunteer observer snow reports, and cross country ski track recordings from location-enabled mobile devices. The first step of the data integration procedure includes data discovery, data retrieval, and data quality control of snow observations at ground stations. The WaterML R package developed in this work enables hydrologists to retrieve and analyze data from multiple organizations that are listed in the Consortium of Universities for the Advancement of Hydrologic Sciences Inc (CUAHSI) Water Data Center catalog directly within the R statistical software environment. Using the WaterML R package is demonstrated by running an energy balance snowpack model in R with data inputs from CUAHSI, and by automating uploads of real time sensor observations to CUAHSI HydroServer. The second step of the procedure requires efficient access to multi-temporal remote sensing snow images. The Snow Inspector web application developed in this research enables the users to retrieve a time series of fractional snow cover from the Moderate Resolution Imaging Spectroradiometer (MODIS) for any point on Earth. The time series retrieval method is based on automated data extraction from tile images provided by a Web Map Tile Service (WMTS). The average required time for retrieving 100 days of data using this technique is 5.4 seconds, which is significantly faster than other methods that require the download of large satellite image files. The presented data extraction technique and space-time visualization user interface can be used as a model for working with other multi-temporal hydrologic or climate data WMTS services. The third, final step of the data integration procedure is generating continuous daily snow cover maps. A custom inverse distance weighting method has been developed

  20. Development of GIS-based Wind Potential Map of Makkah Province, Saudi Arabia

    Science.gov (United States)

    Nayyar, Z. A.; Zaigham, N. A.; Aburizaiza, O. S.; Mahar, G. A.; Eusufi, S. N.

    2011-12-01

    Global energy scenario is changing drastically toward decline, as new major discoveries of fossil fuel are not coming up significantly on regional basis. In case of Saudi Arabia, one of the largest fossil fuel producers, the major oil fields have started exhausting significantly as revealed from the literature research study. Considering the future energy crisis, different other renewable options presently have became imperative to be consider anticipating for the national development. Wind energy in one of them. The development of wind energy technology requires the baseline data relevant to the wind trends and their potentials. Under the present study, an attempt has been made to develop wind power density map of the Makkah Province of Saudi Arabia based on the meteorological data collected at different sparsely located weather stations. GIS application has provided a good option to interpolate the gap areas between the sparsely located weather recording stations. This paper describe the methodology and results of the present study.

  1. A Systematic Mapping Study of Tools for Distributed Software Development Teams

    DEFF Research Database (Denmark)

    Tell, Paolo; Ali Babar, Muhammad

    schemas for providing a framework that can help identify the categories that have attracted significant amount of research and commercial efforts, and the research areas where there are gaps to be filled. Conclusions: The findings show that whilst commercial and open source solutions are predominantly...... gaps. Objective: The objective of this research is to systematically identify and classify a comprehensive list of the technologies that have been developed and/or used for supporting GSD teams. Method: This study has been undertaken as a Systematic Mapping Study (SMS). Our searches identified 1958......Context: A wide variety of technologies have been developed to support Global Software Development (GSD). However, the information about the dozens of available solutions is quite diverse and scattered making it quite difficult to have an overview able to identify common trends and unveil research...

  2. The Trojan Lifetime Champions Health Survey: Development, Validity, and Reliability

    Science.gov (United States)

    Sorenson, Shawn C.; Romano, Russell; Scholefield, Robin M.; Schroeder, E. Todd; Azen, Stanley P.; Salem, George J.

    2015-01-01

    Context Self-report questionnaires are an important method of evaluating lifespan health, exercise, and health-related quality of life (HRQL) outcomes among elite, competitive athletes. Few instruments, however, have undergone formal characterization of their psychometric properties within this population. Objective To evaluate the validity and reliability of a novel health and exercise questionnaire, the Trojan Lifetime Champions (TLC) Health Survey. Design Descriptive laboratory study. Setting A large National Collegiate Athletic Association Division I university. Patients or Other Participants A total of 63 university alumni (age range, 24 to 84 years), including former varsity collegiate athletes and a control group of nonathletes. Intervention(s) Participants completed the TLC Health Survey twice at a mean interval of 23 days with randomization to the paper or electronic version of the instrument. Main Outcome Measure(s) Content validity, feasibility of administration, test-retest reliability, parallel-form reliability between paper and electronic forms, and estimates of systematic and typical error versus differences of clinical interest were assessed across a broad range of health, exercise, and HRQL measures. Results Correlation coefficients, including intraclass correlation coefficients (ICCs) for continuous variables and κ agreement statistics for ordinal variables, for test-retest reliability averaged 0.86, 0.90, 0.80, and 0.74 for HRQL, lifetime health, recent health, and exercise variables, respectively. Correlation coefficients, again ICCs and κ, for parallel-form reliability (ie, equivalence) between paper and electronic versions averaged 0.90, 0.85, 0.85, and 0.81 for HRQL, lifetime health, recent health, and exercise variables, respectively. Typical measurement error was less than the a priori thresholds of clinical interest, and we found minimal evidence of systematic test-retest error. We found strong evidence of content validity, convergent

  3. Development of Energy Efficiency Design Map based on acoustic resonance frequency of suction muffler in compressor

    International Nuclear Information System (INIS)

    Oh, Seungjae; Wang, Semyung; Cho, Sungman

    2015-01-01

    Highlights: • Development of Energy Efficiency Design Map. • Experimental validation of Energy Efficiency Design Map. • Suggestion regarding the Acoustically Supercharged Energy Efficiency. • Sensitivity analysis of the Energy Efficiency Ratio with respect to acoustic pressure. • Suggestion regarding the hybrid coupling method for acoustic analysis in compressor. - Abstract: The volumetric efficiency of the Internal Combustion (IC) engine and compressor can be increased by properly adjusting the acoustic resonance frequency of the suction muffler or the suction valve timing without any additional equipment or power source. This effect is known as acoustic supercharging. However, the energy efficiency has become more important than the volumetric efficiency because of the energy shortage issue and factors influencing consumers’ purchasing decisions. Therefore, methods for increasing the energy efficiency using the acoustic effect in the suction part of IC engine and compressor should be considered. In this study, a systematic method for improving the energy efficiency using the acoustic effect in the suction part of the compressor used in refrigerators and air conditioners was developed for the first time. This effect is named as the Acoustically Supercharged Energy Efficiency (ASEE). For the ASEE, first, a hybrid coupling method was suggested for the acoustical analysis in the suction part of the compressor. Next, an Energy Efficiency Design Map (EEDM) was proposed. This can serve as a design guide for suction mufflers in terms of the energy efficiency. Finally, sensitivity analyses of the Energy Efficiency Ratio (EER) and total massflow rate with respect to the acoustic pressure were conducted to identify the relationship between the acoustic pressure and the suction valve motion. This provides the physical background for the EEDM

  4. Development and mapping of SSR markers linked to resistance-gene homologue clusters in common bean

    Institute of Scientific and Technical Information of China (English)

    Luz; Nayibe; Garzon; Matthew; Wohlgemuth; Blair

    2014-01-01

    Common bean is an important but often a disease-susceptible legume crop of temperate,subtropical and tropical regions worldwide. The crop is affected by bacterial, fungal and viral pathogens. The strategy of resistance-gene homologue(RGH) cloning has proven to be an efficient tool for identifying markers and R(resistance) genes associated with resistances to diseases. Microsatellite or SSR markers can be identified by physical association with RGH clones on large-insert DNA clones such as bacterial artificial chromosomes(BACs). Our objectives in this work were to identify RGH-SSR in a BAC library from the Andean genotype G19833 and to test and map any polymorphic markers to identify associations with known positions of disease resistance genes. We developed a set of specific probes designed for clades of common bean RGH genes and then identified positive BAC clones and developed microsatellites from BACs having SSR loci in their end sequences. A total of 629 new RGH-SSRs were identified and named BMr(bean microsatellite RGH-associated markers). A subset of these markers was screened for detecting polymorphism in the genetic mapping population DOR364 × G19833. A genetic map was constructed with a total of 264 markers,among which were 80 RGH loci anchored to single-copy RFLP and SSR markers. Clusters of RGH-SSRs were observed on most of the linkage groups of common bean and in positions associated with R-genes and QTL. The use of these new markers to select for disease resistance is discussed.

  5. Development of Geospatial Map Based Portal for New Delhi Municipal Council

    Science.gov (United States)

    Gupta, A. Kumar Chandra; Kumar, P.; Sharma, P. Kumar

    2017-09-01

    The Geospatial Delhi Limited (GSDL), a Govt. of NCT of Delhi Company formed in order to provide the geospatial information of National Capital Territory of Delhi (NCTD) to the Government of National Capital Territory of Delhi (GNCTD) and its organs such as DDA, MCD, DJB, State Election Department, DMRC etc., for the benefit of all citizens of Government of National Capital Territory of Delhi (GNCTD). This paper describes the development of Geospatial Map based Portal (GMP) for New Delhi Municipal Council (NDMC) of NCT of Delhi. The GMP has been developed as a map based spatial decision support system (SDSS) for planning and development of NDMC area to the NDMC department and It's heaving the inbuilt information searching tools (identifying of location, nearest utilities locations, distance measurement etc.) for the citizens of NCTD. The GMP is based on Client-Server architecture model. It has been developed using Arc GIS Server 10.0 with .NET (pronounced dot net) technology. The GMP is scalable to enterprise SDSS with enterprise Geo Database & Virtual Private Network (VPN) connectivity. Spatial data to GMP includes Circle, Division, Sub-division boundaries of department pertaining to New Delhi Municipal Council, Parcels of residential, commercial, and government buildings, basic amenities (Police Stations, Hospitals, Schools, Banks, ATMs and Fire Stations etc.), Over-ground and Underground utility network lines, Roads, Railway features. GMP could help achieve not only the desired transparency and easiness in planning process but also facilitates through efficient & effective tools for development and management of MCD area. It enables a faster response to the changing ground realities in the development planning, owing to its in-built scientific approach and open-ended design.

  6. Mapping objects through a data motor NoSQL case study: framework for web applications development

    Directory of Open Access Journals (Sweden)

    Roger Calderón-Moreno

    2016-01-01

    Full Text Available This article emerged as an academic initiative in which it is observed that the areas of knowledge in software develop- ment under the paradigm of Object-oriented programming (OOP is confronted by a model data storage relational raising two scenarios different developers try to mitigate through conversions between types or using intermediate tools such as mapping relational objects that bring certain advantages and disadvantages, and therefore, was raised within the project the possibility of using a storage engine type non-relational or NoSQL.With the design and development of the framework for generating Web applications, the user can define objects to consider including in the application, which will be stored in MongoDB engine, which arranges the data in the form of documents. The dynamic structure of these documents can be used in many projects, including many who traditionally would work on relational databases.Aiming to socialize and evaluate the work done, some instruments were designed to collect information from users with experience in the field of databases and software development. As a result highlights that software developers have clear concepts of object persistence through object-relational mapping (ORM, that learning these techniques software development through implementing own code or using APIs have a high degree of complexity and mostly (60% they are aware that these implementations generate low performance in applications. In addition, the opening of these highlights to choose alternative to organize and store information, different to the relational approach used for several years.

  7. DEVELOPMENT OF GEOSPATIAL MAP BASED PORTAL FOR NEW DELHI MUNICIPAL COUNCIL

    Directory of Open Access Journals (Sweden)

    A. Kumar Chandra Gupta

    2017-09-01

    Full Text Available The Geospatial Delhi Limited (GSDL, a Govt. of NCT of Delhi Company formed in order to provide the geospatial information of National Capital Territory of Delhi (NCTD to the Government of National Capital Territory of Delhi (GNCTD and its organs such as DDA, MCD, DJB, State Election Department, DMRC etc., for the benefit of all citizens of Government of National Capital Territory of Delhi (GNCTD. This paper describes the development of Geospatial Map based Portal (GMP for New Delhi Municipal Council (NDMC of NCT of Delhi. The GMP has been developed as a map based spatial decision support system (SDSS for planning and development of NDMC area to the NDMC department and It’s heaving the inbuilt information searching tools (identifying of location, nearest utilities locations, distance measurement etc. for the citizens of NCTD. The GMP is based on Client-Server architecture model. It has been developed using Arc GIS Server 10.0 with .NET (pronounced dot net technology. The GMP is scalable to enterprise SDSS with enterprise Geo Database & Virtual Private Network (VPN connectivity. Spatial data to GMP includes Circle, Division, Sub-division boundaries of department pertaining to New Delhi Municipal Council, Parcels of residential, commercial, and government buildings, basic amenities (Police Stations, Hospitals, Schools, Banks, ATMs and Fire Stations etc., Over-ground and Underground utility network lines, Roads, Railway features. GMP could help achieve not only the desired transparency and easiness in planning process but also facilitates through efficient & effective tools for development and management of MCD area. It enables a faster response to the changing ground realities in the development planning, owing to its in-built scientific approach and open-ended design.

  8. DEVELOPMENT OF TIME-SERIES HUMAN SETTLEMENT MAPPING SYSTEM USING HISTORICAL LANDSAT ARCHIVE

    Directory of Open Access Journals (Sweden)

    H. Miyazaki

    2016-06-01

    Full Text Available Methodology of automated human settlement mapping is highly needed for utilization of historical satellite data archives for urgent issues of urban growth in global scale, such as disaster risk management, public health, food security, and urban management. As development of global data with spatial resolution of 10-100 m was achieved by some initiatives using ASTER, Landsat, and TerraSAR-X, next goal has targeted to development of time-series data which can contribute to studies urban development with background context of socioeconomy, disaster risk management, public health, transport and other development issues. We developed an automated algorithm to detect human settlement by classification of built-up and non-built-up in time-series Landsat images. A machine learning algorithm, Local and Global Consistency (LLGC, was applied with improvements for remote sensing data. The algorithm enables to use MCD12Q1, a MODIS-based global land cover map with 500-m resolution, as training data so that any manual process is not required for preparation of training data. In addition, we designed the method to composite multiple results of LLGC into a single output to reduce uncertainty. The LLGC results has a confidence value ranging 0.0 to 1.0 representing probability of built-up and non-built-up. The median value of the confidence for a certain period around a target time was expected to be a robust output of confidence to identify built-up or non-built-up areas against uncertainties in satellite data quality, such as cloud and haze contamination. Four scenes of Landsat data for each target years, 1990, 2000, 2005, and 2010, were chosen among the Landsat archive data with cloud contamination less than 20%.We developed a system with the algorithms on the Data Integration and Analysis System (DIAS in the University of Tokyo and processed 5200 scenes of Landsat data for cities with more than one million people worldwide.

  9. Development of an airborne gamma radiation system for snow surveys

    Energy Technology Data Exchange (ETDEWEB)

    Fritzsche, A E [EG and G, Inc., Las Vegas, NV (USA)

    1979-01-01

    An airborne gamma-snow survey system requires detailed design to obtain maximum precision and accuracy. The use of NaI(Te) gamma detectors with a full gamma energy spectrum pulse height analyzer together with a small computer provide a self-contained and flexible system. The dual detector method determines atmospheric radon perturbations in the detection system. Detailed calibration experiments must be performed to determine twenty parameters that describe the physical nature of the system. Multiple high altitude and lake flights are used to obtain background components. Simulation pads, loaded with varying concentrations of /sup 40/K, /sup 232/Th and /sup 23/..gamma..U yield photopeak stripping coefficients and basic system sensitivity. Multiple altitude flights over land lines provide air attenuation coefficients which may converted to water attenuation coefficients.

  10. Adolescent lifestyle and behaviour: a survey from a developing country.

    Directory of Open Access Journals (Sweden)

    Waris Qidwai

    2010-09-01

    Full Text Available Adolescents form two-thirds of our population. This is a unique group of people with special needs. Our survey aims to identify the lifestyle and behavioral patterns in this group of people and subsequently come up with issues that warrant special attention.A survey was performed in various schools of Karachi. Data collection was done via a face-to-face interview based on a structured, pre-tested questionnaire. Participants included all willing persons between 12-19 years of age.Most adolescents with lifestyle issues fell in the age group of 16-18 years. Females were more depressed than males and had more sleep problems. Substance abuse and other addictions were documented more in males. Watching television or listening to music was stated as the most common late night activity (61.8% and therefore was also referred to as the contributory factor for less than eight hours of sleep each day. (58.9% of the respondents are getting less than eight hours of sleep daily. (41.5% of the respondents who felt depressed sought treatment for it. Quite a few of them were also indulged in substance abuse and other addictions. Only (16.8% of the respondents opined that physical activity is essential for health. Thirty-five adolescents out of all the respondents were smoking cigarettes currently, whereas 7% of the respondents chewed paan (areca nut. Peer pressure was the most common reason (37.1% to start smoking.Adolescents need to be treated as a distinct segment of our population and it is important to realize and address their health and lifestyle problems. Inadequate sleep, depression and smoking were the leading unhealthy behaviours among the respondents. Families can play an important role to help these adolescents live a healthier life. Further research studies should be carried out to highlight issues of concern and their possible solutions in this population.

  11. THE ALMA SPECTROSCOPIC SURVEY IN THE HUBBLE ULTRA DEEP FIELD: IMPLICATIONS FOR SPECTRAL LINE INTENSITY MAPPING AT MILLIMETER WAVELENGTHS AND CMB SPECTRAL DISTORTIONS

    Energy Technology Data Exchange (ETDEWEB)

    Carilli, C. L.; Walter, F. [National Radio Astronomy Observatory, P.O. Box 0, Socorro, NM 87801 (United States); Chluba, J. [Jodrell Bank Centre for Astrophysics, University of Manchester, Oxford Road, M13 9PL (United Kingdom); Decarli, R. [Max-Planck Institute for Astronomy, D-69117 Heidelberg (Germany); Aravena, M. [Nucleo de Astronomia, Facultad de Ingenieria, Universidad Diego Portales, Av. Ejercito 441, Santiago (Chile); Wagg, J. [Square Kilometre Array Organisation, Lower Withington, Cheshire (United Kingdom); Popping, G. [European Southern Observatory, Karl-Schwarzschild-Strasse 2, D-85748, Garching (Germany); Cortes, P. [Joint ALMA Observatory—ESO, Av. Alonso de Cordova, 3104, Santiago (Chile); Hodge, J. [Leiden Observatory, Leiden University, Niels Bohrweg 2, NL2333 RA Leiden (Netherlands); Weiss, A. [Max-Planck-Institut für Radioastronomie, Auf dem Hügel 69, D-53121 Bonn (Germany); Bertoldi, F. [Argelander Institute for Astronomy, University of Bonn, Auf dem Hügel 71, D-53121 Bonn (Germany); Riechers, D., E-mail: ccarilli@aoc.nrao.edu [Cornell University, 220 Space Sciences Building, Ithaca, NY 14853 (United States)

    2016-12-10

    We present direct estimates of the mean sky brightness temperature in observing bands around 99 and 242 GHz due to line emission from distant galaxies. These values are calculated from the summed line emission observed in a blind, deep survey for spectral line emission from high redshift galaxies using ALMA (the ALMA spectral deep field observations “ASPECS” survey). In the 99 GHz band, the mean brightness will be dominated by rotational transitions of CO from intermediate and high redshift galaxies. In the 242 GHz band, the emission could be a combination of higher order CO lines, and possibly [C ii] 158 μ m line emission from very high redshift galaxies ( z  ∼ 6–7). The mean line surface brightness is a quantity that is relevant to measurements of spectral distortions of the cosmic microwave background, and as a potential tool for studying large-scale structures in the early universe using intensity mapping. While the cosmic volume and the number of detections are admittedly small, this pilot survey provides a direct measure of the mean line surface brightness, independent of conversion factors, excitation, or other galaxy formation model assumptions. The mean surface brightness in the 99 GHZ band is: T{sub B}  = 0.94 ± 0.09 μ K. In the 242 GHz band, the mean brightness is: T{sub B}  = 0.55 ± 0.033 μ K. These should be interpreted as lower limits on the average sky signal, since we only include lines detected individually in the blind survey, while in a low resolution intensity mapping experiment, there will also be the summed contribution from lower luminosity galaxies that cannot be detected individually in the current blind survey.

  12. Toward Development of Pluripotent Porcine Stem Cells by Road Mapping Early Embryonic Development

    DEFF Research Database (Denmark)

    Petkov, Stoyan; Freude, Kristine; Mashayekhi-Nezamabadi, Kaveh

    2017-01-01

    The lack in production of bona fide porcine pluripotent stem cells has definitely been hampered by a lack of research into porcine embryo development. Embryonic development in mammals is the extraordinary transition of a single-celled fertilized zygote into a complex fetus, which occurs...... in the uterus of the maternal adult during the early stages of gestation. Biomedical pig models could serve as genetic backgrounds for establishment of embryonic stem cells (ESCs) or other pluripotent stem cells (such as iPSC), which may be used to model and study diseases in vitro. This chapter provides...... insight into the current knowledge of pluripotent states in the developing pig embryo and the current status in establishment of bona fide porcine ESC (pESC) and piPSCs. It reflects the potential causes underlying the difficulty in establishing pluripotent stem cells and reviews recent data on global...

  13. Evidence, theory and context: using intervention mapping to develop a worksite physical activity intervention.

    Science.gov (United States)

    McEachan, Rosemary R C; Lawton, Rebecca J; Jackson, Cath; Conner, Mark; Lunt, Jennifer

    2008-09-22

    The workplace is an ideal setting for health promotion. Helping employees to be more physically active can not only improve their physical and mental health, but can also have economic benefits such as reduced sickness absence. The current paper describes the development of a three month theory-based intervention that aims to increase levels of moderate intensity physical activity amongst employees in sedentary occupations. The intervention was developed using an intervention mapping protocol. The intervention was also informed by previous literature, qualitative focus groups, an expert steering group, and feedback from key contacts within a range of organisations. The intervention was designed to target awareness (e.g. provision of information), motivation (e.g. goal setting, social support) and environment (e.g. management support) and to address behavioural (e.g. increasing moderate physical activity in work) and interpersonal outcomes (e.g. encourage colleagues to be more physically active). The intervention can be implemented by local facilitators without the requirement for a large investment of resources. A facilitator manual was developed which listed step by step instructions on how to implement each component along with a suggested timetable. Although time consuming, intervention mapping was found to be a useful tool for developing a theory based intervention. The length of this process has implications for the way in which funding bodies allow for the development of interventions as part of their funding policy. The intervention will be evaluated in a cluster randomised trial involving 1350 employees from 5 different organisations, results available September 2009.

  14. Evidence, Theory and Context: Using intervention mapping to develop a worksite physical activity intervention

    Directory of Open Access Journals (Sweden)

    Conner Mark

    2008-09-01

    Full Text Available Abstract Background The workplace is an ideal setting for health promotion. Helping employees to be more physically active can not only improve their physical and mental health, but can also have economic benefits such as reduced sickness absence. The current paper describes the development of a three month theory-based intervention that aims to increase levels of moderate intensity physical activity amongst employees in sedentary occupations. Methods The intervention was developed using an intervention mapping protocol. The intervention was also informed by previous literature, qualitative focus groups, an expert steering group, and feedback from key contacts within a range of organisations. Results The intervention was designed to target awareness (e.g. provision of information, motivation (e.g. goal setting, social support and environment (e.g. management support and to address behavioural (e.g. increasing moderate physical activity in work and interpersonal outcomes (e.g. enco