WorldWideScience

Sample records for survey instrument consisted

  1. Development of the physician satisfaction survey instrument.

    Science.gov (United States)

    Soo Hoo, W E; Ramer, L

    1998-01-01

    Continuous quality improvement (CQI) activities depend on valid and reliable instruments to generate data. An evaluation of internal and external customer satisfaction is one of the pillars of the CQI process. This article describes the development of a valid and reliable instrument for measuring physicians' satisfaction with the orthopedic nursing units at a major medical trauma center. The physician satisfaction survey instrument was found to be internally consistent (alpha = .95). Confirmatory factor analysis revealed that 68% of the variance in physician satisfaction scores (eigenvalue = 8.14) was explained by using a single-factor model.

  2. Consistency of DIAGNOdent instruments for clinical assessment of fissure caries.

    Science.gov (United States)

    Astvaldsdóttir, Alfheidur; Holbrook, W Peter; Tranaeus, Sofia

    2004-08-01

    DIAGNOdent (KaVo, Biberach, Germany) has shown high diagnostic accuracy and intra-operator agreement for caries detection, both in vitro and in vivo. The aims of this study were to compare DIAGNOdent with visual examination (VI) and bitewing radiographs (BW) for clinical assessment of occlusal fissures, and to evaluate inter-device consistency of clinical recording using four different DIAGNOdent instruments; secondly, to correlate DIAGNOdent readings with microbial culture of the measured site. The subjects were young adults, the material comprising 34 occlusal fissures, scheduled for restorative treatment at the Dental School Clinic of the University of Iceland. Two examiners conducted visual and radiographic assessments. One examiner measured each site with four DIAGNOdent instruments in random order. The fissure was then opened and lesion depth was classified on a 4-point scale. Bacterial samples were taken from the fissure before and after opening. Intra-operator agreement was high (r = 0.85-0.98). Inter-device correlation for the four DIAGNOdent instruments was significant in all cases (r = 0.81-0.92). However, a common cut-off point could not be determined. There was weak but significant correlation between DIAGNOdent readings and all three classes of lesion depth. Level of infection showed very weak correlation with the DIAGNOdent readings. It was concluded that DIAGNOdent is more reliable in detecting dentinal caries if a proper cut-off point is used than in indicating actual lesion depth. Readings from the different instruments were not directly comparable, however, owing to the lack of a common cut-off point.

  3. Applications of Calendar Instruments in Social Surveys: a review

    NARCIS (Netherlands)

    Glasner, T.J.; Vaart, van der W.

    2009-01-01

    Retrospective reports in survey interviews and questionnaires are subject to many types of recall error, which affect completeness, consistency, and dating accuracy. Concerns about this problem have led to the development of so-called calendar instruments, or timeline techniques. These aided recall

  4. Current Status Of Velocity Field Surveys: A Consistency Check

    CERN Document Server

    Sarkar, D; Watkins, R; Sarkar, Devdeep; Feldman, Hume A.

    2006-01-01

    We present a statistical analysis comparing the bulk--flow measurements for six recent peculiar velocity surveys, namely, ENEAR, SFI, RFGC, SBF and the Mark III singles and group catalogs. We study whether the bulk--flow estimates are consistent with each other and construct the full three dimensional bulk--flow vectors. The method we discuss could be used to test the consistency of all velocity field surveys. We show that although these surveys differ in their geometry and measurement errors, their bulk flow vectors are expected to be highly correlated and in fact show impressive agreement in all cases. Our results suggest that even though the surveys we study target galaxies of different morphology and use different distance measures, they all reliably reflect the same underlying large-scale flow.

  5. Star Formation & Stellar Evolution: Future Surveys & Instrumentation

    CERN Document Server

    Evans, C J

    2015-01-01

    The next generation of multi-object spectrographs (MOS) will deliver comprehensive surveys of the Galaxy, Magellanic Clouds and nearby dwarfs. These will provide us with the vast samples, spanning the full extent of the Hertzsprung-Russell diagram, that are needed to explore the chemistry, history and dynamics of their host systems. Further ahead, the Extremely Large Telescopes (ELTs) will have sufficient sensitivity and angular resolution to extend stellar spectroscopy well beyond the Local Group, opening-up studies of the chemical evolution of galaxies across a broad range of galaxy types and environments. In this contribution I briefly reflect on current and future studies of stellar populations, and introduce plans for the MOSAIC instrument for the European ELT.

  6. Probing primordial non-Gaussianity consistency relation with galaxy surveys

    CERN Document Server

    Yamauchi, Daisuke

    2015-01-01

    With a radio continuum galaxy survey by Square Kilometre Array (SKA), a photometric galaxy survey by Euclid and their combination, we forecast future constraints on primordial non-Gaussianity. We focus on the potential impact of local-type higher-order nonlinear parameters on the parameter estimation and particularly the confirmation of the inflationary consistency inequality. Non-standard inflationary models, such as multi-field models, introduce the scale-dependent stochastic clustering of galaxies on large scales, which is a unique probe of mechanism for generating primordial density fluctuations. Our Fisher matrix analysis indicates that a deep and wide survey provided by SKA is more advantageous to constrain $\\tau_{\\rm NL}$, while Euclid has a strong constraining power for $f_{\\rm NL}$ due to the redshift information, suggesting that the joint analysis between them are quite essential to break the degeneracy between $f_{\\rm NL}$ and $\\tau_{\\rm NL}$. The combination of full SKA and Euclid will achieve the...

  7. Instrumental Motives in Negative Emotion Regulation in Daily Life: Frequency, Consistency, and Predictors.

    Science.gov (United States)

    Kalokerinos, Elise K; Tamir, Maya; Kuppens, Peter

    2016-12-19

    People regulate their emotions not only for hedonic reasons but also for instrumental reasons, to attain the potential benefits of emotions beyond pleasure and pain. However, such instrumental motives have rarely been examined outside the laboratory as they naturally unfold in daily life. To assess whether and how instrumental motives operate outside the laboratory, it is necessary to examine them in response to real and personally relevant stimuli in ecologically valid contexts. In this research, we assessed the frequency, consistency, and predictors of instrumental motives in negative emotion regulation in daily life. Participants (N = 114) recalled the most negative event of their day each evening for 7 days and reported their instrumental motives and negative emotion goals in that event. Participants endorsed performance motives in approximately 1 in 3 events and social, eudaimonic, and epistemic motives in approximately 1 in 10 events. Instrumental motives had substantially higher within- than between-person variance, indicating that they were context-dependent. Indeed, although we found few associations between instrumental motives and personality traits, relationships between instrumental motives and contextual variables were more extensive. Performance, social, and eudaimonic motives were each predicted by a unique pattern of contextual appraisals. Our data demonstrate that instrumental motives play a role in daily negative emotion regulation as people encounter situations that pose unique regulatory demands. (PsycINFO Database Record

  8. Lateral Violence in Nursing Survey: Instrument Development and Validation

    Directory of Open Access Journals (Sweden)

    Lynne S. Nemeth

    2017-07-01

    Full Text Available An examination of the psychometric properties of the Lateral Violence in Nursing Survey (LVNS, an instrument previously developed to measure the perceived incidence and severity of lateral violence (LV in the nursing workplace, was carried out. Conceptual clustering and principal components analysis were used with survey responses from 663 registered nurses and ancillary nursing staff in a southeastern tertiary care medical center. Where appropriate, Cronbach’s alpha (α evaluated internal consistency. The prevalence/severity of lateral violence items constitute two distinct subscales (LV by self and others with Cronbach’s alpha of 0.74 and 0.86, respectively. The items asking about potential causes of LV are unidimensional and internally consistent (alpha = 0.77 but there is no conceptually coherent theme underlying the various causes. Respondents rating a potential LV cause as “major” scored higher on both prevalence/severity subscales than those rating it a “minor” cause or not a cause. Subsets of items on the LVNS are internally reliable, supporting construct validity. Revisions of the original LVNS instrument will improve its use in future work.

  9. Higher Education and Students with Orthopedic Disabilities: A Survey Instrument.

    Science.gov (United States)

    Singh, Delar K.

    A survey instrument is presented that was used in a national survey of 160 colleges and universities to explore facilities and services to students with orthopedic disabilities. The survey contains 33 items that focus on the following areas: structural accessibility, academic accessibility, dorm-living, and recreational opportunities. The total…

  10. Urbis: Instrument ofr local environmental survey

    NARCIS (Netherlands)

    Borst, H.C.

    2000-01-01

    TNO has developed a GIS based instrument, named Urbis, which makes it possible to assess the noise situation in a municipality or region as a whole, with a high level of detail. On the basis of activity or emission data (road-traffic intensities, acoustical reports, etc.), noise loads are calculated

  11. Measuring teamwork in health care settings: a review of survey instruments.

    Science.gov (United States)

    Valentine, Melissa A; Nembhard, Ingrid M; Edmondson, Amy C

    2015-04-01

    Teamwork in health care settings is widely recognized as an important factor in providing high-quality patient care. However, the behaviors that comprise effective teamwork, the organizational factors that support teamwork, and the relationship between teamwork and patient outcomes remain empirical questions in need of rigorous study. To identify and review survey instruments used to assess dimensions of teamwork so as to facilitate high-quality research on this topic. We conducted a systematic review of articles published before September 2012 to identify survey instruments used to measure teamwork and to assess their conceptual content, psychometric validity, and relationships to outcomes of interest. We searched the ISI Web of Knowledge database, and identified relevant articles using the search terms team, teamwork, or collaboration in combination with survey, scale, measure, or questionnaire. We found 39 surveys that measured teamwork. Surveys assessed different dimensions of teamwork. The most commonly assessed dimensions were communication, coordination, and respect. Of the 39 surveys, 10 met all of the criteria for psychometric validity, and 14 showed significant relationships to nonself-report outcomes. Evidence of psychometric validity is lacking for many teamwork survey instruments. However, several psychometrically valid instruments are available. Researchers aiming to advance research on teamwork in health care should consider using or adapting one of these instruments before creating a new one. Because instruments vary considerably in the behavioral processes and emergent states of teamwork that they capture, researchers must carefully evaluate the conceptual consistency between instrument, research question, and context.

  12. Consistency of policy instruments. How the EU could move to a -30% greenhouse gas reduction target

    Energy Technology Data Exchange (ETDEWEB)

    Hoehne, N.; Hagemann, M.; Moltmann, S.; Escalante, D. [Ecofys Germany, Berlin (Germany)

    2011-04-15

    The report provides options for how to achieve a 30% reduction in greenhouse gas emissions, in the EU, from 1990 to 2020. The EU has agreed a set of goals (objectives) and related instruments for 2020. The most significant objectives are the 20% or 30% reduction of greenhouse gases (all emissions, both within and outside the Emissions Trading System), the 20% improvement of energy efficiency and the 20% of renewable energy use by 2020. The stringency of the instruments used to reach these goals, must be set carefully to ensure overall consistency. Particularly after the economic crisis of 2008/2009, the Climate and Energy Package has to be 'tuned' again to be fully consistent, e.g. fast take up of renewable energy and fewer emissions due to the recession may cause an over-allocation in the EU-ETS.

  13. A Simple Instrument Designed to Provide Consistent Digital Facial Images in Dermatology

    OpenAIRE

    Balakrishnan Nirmal; Pai, Sathish B.; Handattu Sripathi

    2013-01-01

    Photography has proven to be a valuable tool in the field of dermatology. The major reason for poor photographs is the inability to produce comparable images in the subsequent follow ups. Combining digital photography with image processing software analysis brings consistency in tracking serial images. Digital photographs were taken with the aid of an instrument which we designed in our workshop to ensure that photographs were taken with identical patient positioning, camera angles and distan...

  14. Development of an RDECOM Workforce Motivational Survey Instrument

    Science.gov (United States)

    2016-09-01

    compensation and workplace environment structure to motivate the target generational workforce demographic to improve productivity. The deliverables from this...factors. We developed a closed-loop survey instrument and analysis methodology to identify distinct generational workforce motivational factors. Nine...United States Army Research Development and Engineering Command (RDECOM) supervisory engineers, General Schedule (GS) 14 and 15, reviewed the survey

  15. Inertial instrument system for aerial surveying

    Science.gov (United States)

    Brown, R.H.; Chapman, W.H.; Hanna, W.F.; Mongan, C.E.; Hursh, J.W.

    1985-01-01

    An inertial guidance system for aerial surveying has been developed under contract to the U.S. Geological Survey. This prototype system, known as the aerial profiling of terrain (APT) system, is designed to determine continuously the positions of points along an aircraft flight path, or the underlying terrain profile, to an accuracy of + or - 0.5 ft (15 cm) vertically and + or - 2 ft (61 cm) horizontally. The system 's objective thus is to accomplish, from a fixed-wing aircraft, what would traditionally be accomplished from ground-based topographic surveys combined with aerial photography and photogrammetry. The two-part strategy for measuring the terrain profile entails: (1) use of an inertial navigator for continuous determination of the three-coordinate position of the aircraft, and (2) use of an eye-safe pulsed laser profiler for continuous measurement of the vertical distance from aircraft to land surface, so that the desired terrain profile can then be directly computed. The APT system, installed in a DeHavilland Twin Otter aircraft, is typically flown at a speed of 115 mph (105 knots) at an altitude of 2,000 ft (610 m) above the terrain. Performance-evaluation flights have shown that the vertical and horizontal accuracy specifications are met. (USGS)

  16. Survey instruments used in clinical and epidemiological research on waterpipe tobacco smoking: a systematic review

    Directory of Open Access Journals (Sweden)

    Gunukula Sameer K

    2010-07-01

    Full Text Available Abstract Background The primary objective was to systematically review the medical literature for instruments validated for use in epidemiological and clinical research on waterpipe smoking. Methods We searched the following databases: MEDLINE, EMBASE, and ISI the Web of Science. We selected studies using a two-stage duplicate and independent screening process. We included papers reporting on the development and/or validation of survey instruments to measure waterpipe tobacco consumption or related concepts. Two reviewers used a standardized and pilot tested data abstraction form to collect data from each eligible study using a duplicate and independent screening process. We also determined the percentage of observational studies assessing the health effects of waterpipe tobacco smoking and the percentage of studies of prevalence of waterpipe tobacco smoking that have used validated survey instruments. Results We identified a total of five survey instruments. One instrument was designed to measure knowledge, attitudes, and waterpipe use among pregnant women and was shown to have internal consistency and content validity. Three instruments were designed to measure waterpipe tobacco consumption, two of which were reported to have face validity. The fifth instrument was designed to measure waterpipe dependence and was rigorously developed and validated. One of the studies of prevalence and none of the studies of health effects of waterpipe smoking used validated instruments. Conclusions A number of instruments for measuring the use of and dependence on waterpipe smoking exist. Future research should study content validity and cross cultural adaptation of these instruments.

  17. Survey Instrument Validity Part I: Principles of Survey Instrument Development and Validation in Athletic Training Education Research

    Science.gov (United States)

    Burton, Laura J.; Mazerolle, Stephanie M.

    2011-01-01

    Context: Instrument validation is an important facet of survey research methods and athletic trainers must be aware of the important underlying principles. Objective: To discuss the process of survey development and validation, specifically the process of construct validation. Background: Athletic training researchers frequently employ the use of…

  18. Instrumentation

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Journal Scope:Instrumentation is a high quality open access peer reviewed research journal.Authors are solicited to contribute to these journals by submitting articles that illustrate most up-to-date research results,projects,surveying works and industrial experiences that describe significant advances in the instrumental science.The mission of the Instrumentation is

  19. [French residents' training in instrumental deliveries: A national survey].

    Science.gov (United States)

    Saunier, C; Raimond, E; Dupont, A; Pelissier, A; Bonneau, S; Gabriel, R; Graesslin, O

    2016-11-01

    To evaluate French residents in Obstetrics and Gynaecology's training in instrumental deliveries in 2015. We conducted a national descriptive survey among 758 residents between December 2014 and January 2015. Respondents were invited by email to specify their University Hospital, their current university term, the number of instrumental deliveries performed by vacuum extractor, forceps or spatulas, and whether they made systematic ultrasound exams before performing the extraction. Response rate was 34.7 % (n=263). There were important differences between regions in terms of type of instruments used. Vacuum extractor was the most commonly used instrument for instrumental deliveries by French residents (56.9 %), more than forceps (25.2 %) and spatulas (17.9 %). At the end of the residency, all the residents had been trained in instrumental deliveries with at least two instruments. The training of difficult techniques as well as their perfect control is required for instrumental deliveries. Yet, we are forced to note that there are substantial differences in the French residents' training in instrumental deliveries depending on their region. So, teaching at least two techniques seems essential as well as improving the training capacities and standardizing practices. A greater systematization of the teaching of the mechanics and obstetric techniques might be a solution to be considered too. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  20. The Undergraduate Instrumental Analysis Course: A Survey of Available Equipment.

    Science.gov (United States)

    Leggett, D. J.

    1981-01-01

    Reports results of a survey in which 110 universities were selected to respond to questions regarding approximate age and cost of the instruments used in three major areas: separations, spectroscopy, and electroanalysis. Respondents (N=41) also indicated which pieces of equipment were used in undergraduate courses or were used for research. (CS)

  1. Technical evaluation of available state of Nevada survey instruments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-02-01

    Argonne National Laboratory (ANL) is reviewing the survey research studies completed by Mountain West Research (1987-1989) for the state of Nevada`s Nuclear Waste Project Office. In this research, 14 survey instruments were used to seek data on whether perceptions of risk could be associated with the possible siting of a high-level radioactive waste repository in Nevada and could be a dominant source of potential, significant, adverse economic impacts. This report presents results from phase 1 of the review, in which ANL contracted with the National Opinion Research Center (NORC) at the University of Chicago to evaluate the technical merits of the nine survey instruments that ANL had been able to acquire. The scope of NORC`s work was limited to rating the questions and stating their strengths and weaknesses. NORC concluded that the surveys could provide valuable data about risk perceptions and potential behavioral responses. NORC identified a few minor problems with a number of questions and the calculated response rates but claimed these problems would probably not have any major biasing effect. The NORC evaluation would have been more complete if the terms used in the questionnaires had been defined, all survey instruments had been acquired, and all data had been made available to the public.

  2. Antisocial sport behaviors survey: instrument development and initial validation.

    Science.gov (United States)

    Kaye, Miranda P; Hoar, Sharleen

    2015-04-01

    The development of a self-report instrument to measure antisocial sport behavior, labeled the Antisocial Sport Behavior Survey (ASBS), among large and diverse samples of athletes is reported. Grounded in the social cognitive theory of moral thought and action (Bandura, 1991) and interpersonal theory (Horowitz, 2004), this instrument was developed and tested in accordance with the traditions of construct validity and classical test theory (Gehlback & Brinkworth, 2011). In Phase 1, 272 college-aged competitive sport participants confirmed a theoretical structure of antisocial sport behavior including eight factors (hypercompetitive, intimidating, antagonistic, disrespectful, exploitable, overly accommodating, abetting, and melodramatic). Phase 2 reports on item development and the response structure of the instrument. In Phase 3, evidence of structural validity and external validity for the ASBS was established with 340 college-aged competitive sport participants. The ASBS presents as a promising new instrument to advance understanding of antisocial sport behavior acts committed by competitive athletes.

  3. Two valuation questions in one survey: Is it a recipe for sequencing and instrument context effects?

    Science.gov (United States)

    Giraud, K.L.; Loomis, J.B.; Johnson, R.L.

    1999-01-01

    Economic theory suggests that willingness to pay for two goods independently offered should remain unchanged when the survey instrument changes slightly. Four survey treatments consisting of comprehensive good and a subset of that good were used. The surveys alternated in the question ordering and in the embedded good which accompanied the comprehensive good. We tested for sequencing and instrument context effects using both a combined and split sample designs. In the combined sample case we found some evidence to sequencing effects in the data containing the first subset good. Likelihood ratio tests indicated that sequencing did not effect scale or location of parameters. In the test for instrument context effects, evidence was found indicating context does effect willingness to pay estimates.

  4. Instrumentation

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    Journal Scope:Instrumentation is a high quality open access peer reviewed research journal.Authors are solicited to contribute to these journals by submitting articles that illustrate most up-to-date research results,projects,surveying works and industrial experiences that describe significant advances in the instrumental science.The mission of the Instrumentation is to provide a platform for the researchers,academicians,

  5. Instrument and Survey Analysis Technical Report: Program Implementation Survey. Technical Report #1112

    Science.gov (United States)

    Alonzo, Julie; Tindal, Gerald

    2011-01-01

    This technical document provides guidance to educators on the creation and interpretation of survey instruments, particularly as they relate to an analysis of program implementation. Illustrative examples are drawn from a survey of educators related to the use of the easyCBM learning system. This document includes specific sections on…

  6. Parents' childhood fever management: community survey and instrument development.

    Science.gov (United States)

    Walsh, Anne; Edwards, Helen; Fraser, Jenny

    2008-08-01

    This paper is a report of a study to explore Australian parents' knowledge, beliefs, practices and information sources about fever management and develop a scale to measure parents' fever management practices. Parental fever phobia and overuse of antipyretics to reduce fever continue. No scales to measure parents' fever management practices are available. A community-based, postal survey was carried out in 2005 with 401 Australian parents of well children aged 6 months-5 years. Respondents were recruited through advertising (48.4%), face-to-face (26.4%) and snowball (24.4%) methods. A 33-item instrument was developed; construct and content validity were determined by an expert panel and item reliability by test-retest. Moderate fever (40.0 +/- 1.0 degrees C) was reported to be harmful (88%), causing febrile convulsions (77.7%). Usual practices targeted temperature reduction, antipyretic administration (87.8%), temperature monitoring (52.5%). Fewer evidence-based practices, such as encouraging fluids (49.0%) and light clothing (43.8%), were reported. Positive changes over time (36.4%) included less concern and delayed or reduced antipyretic use. Negative practice changes (22.7%) included greater concern and increased antipyretic use. Medical advice was sought for illness symptoms (48.7%) and high (37.4%) or persistent (41.5%) fevers. Fever management was learnt from doctors, family and friends and working experience, while receiving conflicting information (41.9%) increased concerns and created uncertainty about best practice. Parents need consistent evidence-based information about childhood fever management. The Parental Fever Management Scale requires further testing with different populations and in different cultures and healthcare systems to evaluate its usefulness in nursing practice and research.

  7. Human factors survey of advanced instrumentation and controls

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.

    1989-01-01

    A survey oriented towards identifying the human factors issues in regard to the use of advanced instrumentation and controls (I C) in the nuclear industry was conducted. A number of United States (US) and Canadian nuclear vendors and utilities were participants in the survey. Human factors items, subsumed under the categories of computer-generated displays (CGD), controls, organizational support, training, and related topics, were discussed. The survey found the industry to be concerned about the human factors issues related to the implementation of advanced I C. Fifteen potential human factors problems were identified. They include: the need for an advanced I C guideline equivalent to NUREG-0700; a role change in the control room from operator to supervisor; information overload; adequacy of existing training technology for advanced I C; and operator acceptance and trust. 11 refs., 1 tab.

  8. Weak Lensing from Space I: Instrumentation and Survey Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, Jason; Refregier, Alexandre; Massey, Richard; Albert, Justin; Bacon, David; Bernstein, Gary; Ellis, Richard; Jain, Bhuvnesh; Kim, Alex; Lampton, Mike; McKay, Tim; Akerlof, C.; Aldering, G.; Amanullah, R.; Astier, P.; Barrelet, E.; Bebek, C.; Bergstrom, L.; Bercovitz, J.; Bester, M.; Bonissent, A.; Bower, C.; Carithers, W.; Commins, E.; Day, C.; Deustua, S.; DiGennaro, R.; Ealet, A.; Eriksson, M.; Fruchter, A.; Genat, J.-F.; Goldhaber, G.; Goobar, A.; Groom, D.; Harris, S.; Harvey, P.; Heetderks, H.; Holland, S.; Huterer, D.; Karcher, A.; Kolbe, W.; Kreiger, B.; Lafever, R.; Lamoureux, J.; Levi, M.; Devin, D.; Linder, E.; Loken, S.; Malina, R.; McKee, S.; Miquel, R.; Mortsell, E.; Mostek, N.; Mufson, S.; Musser, J.; Nugent, P.; Oluseyi, H.; Pain, R.; Palaio, N.; Pankow, D.; Perlmutter, S.; Pratt, R.; Prieto, E.; Robinson, K.; Roe, N.; Sholl, M.; Schubnell, M.; Smadja, G.; Smoot, G.; Spadafora, A.; Tarle, G.; Tomasch, A.; von der Lippe, H.; Vincent, D.; Walder, J.-P.; Wang, G.

    2003-04-23

    A wide field space-based imaging telescope is necessary to fully exploit the technique of observing dark matter via weak gravitational lensing. This first paper in a three part series outlines the survey strategies and relevant instrumental parameters for such a mission. As a concrete example of hardware design, we consider the proposed Supernova/Acceleration Probe (SNAP). Using SNAP engineering models, we quantify the major contributions to this telescope's Point Spread Function (PSF). These PSF contributions are relevant to any similar wide field space telescope. We further show that the PSF of SNAP or a similar telescope will be smaller than current ground-based PSFs, and more isotropic and stable over time than the PSF of the Hubble Space Telescope. We outline survey strategies for two different regimes - a ''wide'' 300 square degree survey and a ''deep'' 15 square degree survey that will accomplish various weak lensing goals including statistical studies and dark matter mapping.

  9. Instrumentation

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Journal Scope:Instrumentation is a high quality open access peer reviewed research journal,Authors are solicited to contribute to these journals by submitting articles that illustrate most up-to-date research results,projects,surveying works and industrial

  10. Star Formation and Stellar Evolution: Future Surveys and Instrumentation

    Science.gov (United States)

    Evans, C. J.

    2016-10-01

    The next generation of multi-object spectrographs (MOS) will deliver comprehensive surveys of the Galaxy, Magellanic Clouds and nearby dwarfs. These will provide us with the vast samples, spanning the full extent of the Hertzsprung-Russell diagram, that are needed to explore the chemistry, history and dynamics of their host systems. Further ahead, the Extremely Large Telescopes (ELTs) will have sufficient sensitivity and angular resolution to extend stellar spectroscopy well beyond the Local Group, opening-up studies of the chemical evolution of galaxies across a broad range of galaxy types and environments. In this contribution I briefly reflect on current and future studies of stellar populations, and introduce plans for the MOSAIC instrument for the European ELT.

  11. New hydrologic instrumentation in the U.S. Geological Survey

    Science.gov (United States)

    Latkovich, V.J.; Shope, W.G.; ,

    1991-01-01

    New water-level sensing and recording instrumentation is being used by the U.S. Geological Survey for monitoring water levels, stream velocities, and water-quality characteristics. Several of these instruments are briefly described. The Basic Data Recorder (BDR) is an electronic data logger, that interfaces to sensor systems through a serial-digital interface standard (SDI-12), which was proposed by the data-logger industry; the Incremental Shaft Encoder is an intelligent water-level sensor, which interfaces to the BDR through the SDI-12; the Pressure Sensor is an intelligent, nonsubmersible pressure sensor, which interfaces to the BDR through the SDI-12 and monitors water levels from 0 to 50 feet; the Ultrasonic Velocity Meter is an intelligent, water-velocity sensor, which interfaces to the BDR through the SDI-12 and measures the velocity across a stream up to 500 feet in width; the Collapsible Hand Sampler can be collapsed for insertion through holes in the ice and opened under the ice to collect a water sample; the Lighweight Ice Auger, weighing only 32 pounds, can auger 6- and 8-inch holes through approximately 3.5 feet of ice; and the Ice Chisel has a specially hardened steel blade and 6-foot long, hickory D-handle.

  12. Predictions for surveys with the SPICA Mid-infrared Instrument

    CERN Document Server

    Bonato, M; Cai, Z -Y; De Zotti, G; Bressan, A; Wada, T; Kohno, K; Maiolino, R; Gruppioni, C; Pozzi, F; Lapi, A

    2015-01-01

    We present predictions for number counts and redshift distributions of galaxies detectable in continuum and in emission lines with the Mid-infrared (MIR) Instrument (SMI) proposed for the Space Infrared Telescope for Cosmology and Astrophysics (SPICA). We have considered 24 MIR fine-structure lines, four Polycyclic Aromatic Hydrocarbon (PAH) bands (at 6.2, 7.7, 8.6 and 11.3$\\mu$m) and two silicate bands (in emission and in absorption) at 9.7$\\mu$m and 18.0$\\mu$m. Six of these lines are primarily associated with Active Galactic Nuclei (AGNs), the others with star formation. A survey with the SMI spectrometers of 1 hour integration per field-of-view (FoV) over an area of $1\\,\\hbox{deg}^2$ will yield $5\\,\\sigma$ detections of $\\simeq 140$ AGN lines and of $\\simeq 5.2\\times10^{4}$ star-forming galaxies, $\\simeq 1.6\\times10^{4}$ of which will be detected in at least two lines. The combination of a shallow ($20.0\\,\\hbox{deg}^{2}$, $1.4\\times10^{-1}$ h integration per FoV) and a deep survey ($6.9\\times10^{-3}\\,\\hbox...

  13. Study of internal consistency and factor structure of three versions of the Zung’s rating instrument for anxiety disorders

    Directory of Open Access Journals (Sweden)

    Susana De La Ossa

    2009-03-01

    Full Text Available Background: The Zung’s rating instrument for anxiety disorders has been used in several Colombian researches. Its internal consistency and factor structure have not been reported among university students.Objective: To calculate the internal consistency and explore the factor structure of three versions of the Zung’s rating instrument for anxiety disorders among university students.Method: Two-hundred and twenty-one medicine and psychology students of a private university in Cartagena, Colombia, completed the 20-item version of the Zung’s rating instrument for anxiety disorders. The mean of age of students was 20.5 years (SD=2.6, 64.4% were women, and 54.3% studied medicine. Cronbach alpha was computed and exploratory factor analysis was done for the three versions.Results: The 20-item version of the Zung’s rating instrument for anxiety disorders presents Cronbach alpha coefficient of 0.77 and three principal factors accounted for 40.1% of the total variance. The 10-item version showed Cronbach alpha of 0.83 and two-dimensional structure responsible of 54.0% of the total variance. The 5-item version showed Cronbach alpha of 0.74 and one-dimensional structure accounted for 49.5% of the total variance.Conclusions: The 10- and 5-item version of the Zung’s rating instrument for anxiety disorders present better psychometric properties than the original 20-item version. It is necessary to estimate the properties of these versions compared with a gold standard.

  14. Study of internal consistency and factor structure of three versions of the Zung’s rating instrument for anxiety disorders

    Directory of Open Access Journals (Sweden)

    Susana De La Ossa

    2009-12-01

    Full Text Available Background: The Zung’s rating instrument for anxiety disorders has been used in several Colombian researches. Its internal consistency and factor structure have not been reported among university students. Objective: To calculate the internal consistency and explore the factor structure of three versions of the Zung’s rating instrument for anxiety disorders among university students. Method: Two-hundred and twenty-one medicine and psychology students of a private university in Cartagena, Colombia, completed the 20-item version of the Zung’s rating instrument for anxiety disorders. The mean of age of students was 20.5 years (SD=2.6, 64.4% were women, and 54.3% studied medicine. Cronbach alpha was computed and exploratory factor analysis was done for the three versions. Results: The 20-item version of the Zung’s rating instrument for anxiety disorders presents Cronbach alpha coefficient of 0.77 and three principal factors accounted for 40.1% of the total variance. The 10-item version showed Cronbach alpha of 0.83 and two-dimensional structure responsible of 54.0% of the total variance. The 5-item version showed Cronbach alpha of 0.74 and one-dimensional structure accounted for 49.5% of the total variance. Conclusions: The 10- and 5-item version of the Zung’s rating instrument for anxiety disorders present better psychometric properties than the original 20-item version. It is necessary to estimate the properties of these versions compared with a gold standard.

  15. Survey Instrument Validity Part II: Validation of a Survey Instrument Examining Athletic Trainers' Knowledge and Practice Beliefs Regarding Exertional Heat Stroke

    Science.gov (United States)

    Burton, Laura J.; Mazerolle, Stephanie M.

    2011-01-01

    Objective: The purpose of this article is to discuss the process of developing and validating an instrument to investigate an athletic trainer's attitudes and behaviors regarding the recognition and treatment of exertional heat stroke. Background: Following up from our initial paper, which discussed the process of survey instrument design and…

  16. Surveying Instruments: Their History and Classroom Use. National Council of Teachers of Mathematics, Yearbook 19 [1947].

    Science.gov (United States)

    Kiely, Edmond R.

    The first four chapters trace the history of surveying instruments from beginnings in Egypt, China, and Babylonia to Greece and Rome, then Europe, Islam, and India and finally in the Renaissance in Europe. The organization of these chapters is generally by the major areas of leveling instruments, right-angle instruments, staff combinations, and…

  17. Development and validation of a survey instrument for assessing prescribers' perception of computerized drug-drug interaction alerts.

    Science.gov (United States)

    Zheng, Kai; Fear, Kathleen; Chaffee, Bruce W; Zimmerman, Christopher R; Karls, Edward M; Gatwood, Justin D; Stevenson, James G; Pearlman, Mark D

    2011-12-01

    To develop a theoretically informed and empirically validated survey instrument for assessing prescribers' perception of computerized drug-drug interaction (DDI) alerts. The survey is grounded in the unified theory of acceptance and use of technology and an adapted accident causation model. Development of the instrument was also informed by a review of the extant literature on prescribers' attitude toward computerized medication safety alerts and common prescriber-provided reasons for overriding. To refine and validate the survey, we conducted a two-stage empirical validation study consisting of a pretest with a panel of domain experts followed by a field test among all eligible prescribers at our institution. The resulting survey instrument contains 28 questionnaire items assessing six theoretical dimensions: performance expectancy, effort expectancy, social influence, facilitating conditions, perceived fatigue, and perceived use behavior. Satisfactory results were obtained from the field validation; however, a few potential issues were also identified. We analyzed these issues accordingly and the results led to the final survey instrument as well as usage recommendations. High override rates of computerized medication safety alerts have been a prevalent problem. They are usually caused by, or manifested in, issues of poor end user acceptance. However, standardized research tools for assessing and understanding end users' perception are currently lacking, which inhibits knowledge accumulation and consequently forgoes improvement opportunities. The survey instrument presented in this paper may help fill this methodological gap. We developed and empirically validated a survey instrument that may be useful for future research on DDI alerts and other types of computerized medication safety alerts more generally.

  18. Survey of instrumentation for environmental monitoring: major update. Volume 3. Radiation

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    This is the third volume of a four-volume (seven-part) series, the culmination of a comprehensive survey of instrumentation for environmental monitoring. Consideration is given to instruments and techniques presently in use and to those developed for other purposes but having possible applications to radiation monitoring. The results of the survey are given as descriptions of the physical and operating characteristics of available instruments, critical comparisons among instrumentation methods, and recommendations of promising methodology and development of new instrumentation. Information is also given regarding the pollutants to be monitored, their characteristics and forms, their sources and pathways, their effects on the ecosystem, and the means of controlling them through process and regulatory controls. The discussion is presented under sections entitled radiation sources; instrumentation: by type of radiation or instrument type; and, instrumentation for specific radionuclides. (JGB)

  19. Consistency of students’ conceptions of wave propagation: Findings from a conceptual survey in mechanical waves

    Directory of Open Access Journals (Sweden)

    Chernchok Soankwan

    2011-07-01

    Full Text Available We recently developed a multiple-choice conceptual survey in mechanical waves. The development, evaluation, and demonstration of the use of the survey were reported elsewhere [ A. Tongchai et al. Int. J. Sci. Educ. 31 2437 (2009]. We administered the survey to 902 students from seven different groups ranging from high school to second year university. As an outcome of that analysis we were able to identify several conceptual models which the students seemed to be using when answering the questions in the survey. In this paper we attempt to investigate the strength with which the students were committed to these conceptual models, as evidenced by the consistency with which they answered the questions. For this purpose we focus on the patterns of student responses to questions in one particular subtopic, wave propagation. This study has three main purposes: (1 to investigate the consistency of student conceptions, (2 to explore the relative usefulness of different analysis techniques, and (3 to determine what extra information a study of consistency can give about student understanding of basic concepts. We used two techniques: first, categorizing and counting, which is widely used in the science education community, and second, model analysis, recently introduced into physics education research. The manner in which categorizing and counting is used is very diverse while model analysis has been employed only in prescriptive ways. Research studies have reported that students often use their conceptual models inconsistently when solving a series of questions that test the same idea. Our results support their conclusions. Moreover, our findings suggest that students who have had more experiences in physics learning seem to use the scientifically accepted models more consistently. Further, the two analysis techniques have different advantages and disadvantages. Our findings show that model analysis can be used in more diverse ways, provides

  20. Measuring determinants of career satisfaction of anesthesiologists: validation of a survey instrument.

    Science.gov (United States)

    Afonso, Anoushka M; Diaz, James H; Scher, Corey S; Beyl, Robbie A; Nair, Singh R; Kaye, Alan David

    2013-06-01

    To measure the parameter of job satisfaction among anesthesiologists. Survey instrument. Academic anesthesiology departments in the United States. 320 anesthesiologists who attended the annual meeting of the ASA in 2009 (95% response rate). The anonymous 50-item survey collected information on 26 independent demographic variables and 24 dependent ranked variables of career satisfaction among practicing anesthesiologists. Mean survey scores were calculated for each demographic variable and tested for statistically significant differences by analysis of variance. Questions within each domain that were internally consistent with each other within domains were identified by Cronbach's alpha ≥ 0.7. P-values ≤ 0.05 were considered statistically significant. Cronbach's alpha analysis showed strong internal consistency for 10 dependent outcome questions in the practice factor-related domain (α = 0.72), 6 dependent outcome questions in the peer factor-related domain (α = 0.71), and 8 dependent outcome questions in the personal factor-related domain (α = 0.81). Although age was not a variable, full-time status, early satisfaction within the first 5 years of practice, working with respected peers, and personal choice factors were all significantly associated with anesthesiologist job satisfaction. Improvements in factors related to job satisfaction among anesthesiologists may lead to higher early and current career satisfaction. Copyright © 2013 Elsevier Inc. All rights reserved.

  1. Development and measurement properties of the Orthotics and Prosthetics Users' Survey (OPUS): a comprehensive set of clinical outcome instruments.

    Science.gov (United States)

    Heinemann, A W; Bode, R K; O'Reilly, C

    2003-12-01

    The need to measure and evaluate orthotics and prosthetics (O&P) practice has received growing recognition in the past several years. Reliable and valid self-report instruments are needed that can help facilities evaluate patient outcomes. The objective of this project was to develop a set of self-report instruments that assess functional status, quality of life, and satisfaction with devices and services that can be used in an orthotics and prosthetics clinic. Selecting items from a variety of existing instruments, the authors developed and revised four instruments that differentiate patients with varying levels of lower limb function, quality of life, and satisfaction with devices and services. Evidence of construct validity is provided by hierarchies of item difficulty that are consistent with clinical experience. For example, with the lower limb function instrument, running one block was much more difficult than walking indoors. The instruments demonstrate adequate internal consistency (0.88 for lower limb function, 0.88 for quality of life, 0.74 for service satisfaction, 0.78 for device satisfaction). The next steps in their research programme are to evaluate sensitivity and construct validity. The Orthotics and Prosthetics Users' Survey (OPUS) is a promising self-report instrument which may, with further development, allow orthotic and prosthetic practitioners to evaluate the quality and effectiveness of their services as required by accreditation standards such as those of the American Board for Certification in Orthotics and Prosthetics that mandate quality assessment.

  2. Designing, Testing, and Validating an Attitudinal Survey on an Environmental Topic: A Groundwater Pollution Survey Instrument for Secondary School Students

    Science.gov (United States)

    Lacosta-Gabari, Idoya; Fernandez-Manzanal, Rosario; Sanchez-Gonzalez, Dolores

    2009-01-01

    Research in environmental attitudes' assessment has significantly increased in recent years. The development of specific attitude scales for specific environmental problems has often been proposed. This paper describes the Groundwater Pollution Test (GPT), a 19-item survey instrument using a Likert-type scale. The survey has been used with…

  3. Designing, Testing, and Validating an Attitudinal Survey on an Environmental Topic: A Groundwater Pollution Survey Instrument for Secondary School Students

    Science.gov (United States)

    Lacosta-Gabari, Idoya; Fernandez-Manzanal, Rosario; Sanchez-Gonzalez, Dolores

    2009-01-01

    Research in environmental attitudes' assessment has significantly increased in recent years. The development of specific attitude scales for specific environmental problems has often been proposed. This paper describes the Groundwater Pollution Test (GPT), a 19-item survey instrument using a Likert-type scale. The survey has been used with…

  4. BUSINESS SURVEYS-EVALUATION INSTRUMENT OF THE EUROPEAN ECONOMIC CLIMATE

    Directory of Open Access Journals (Sweden)

    SECAREANU CONSTANTIN

    2010-07-01

    Full Text Available Business surveys or conjuncture surveys are specific statiostical researches, but complementary to traditional, official statistics.While official statistics provide quantitive information regardin the level,structure and evolution of varied economic process and phenomena, business surveys offer quality information, essential to the short term evolutional analysis of economic indicators: the diagnosis of the current situation, the timely detection of inflexion points within the economic cycle and the rapid estimation of short term tendencies of the main macroeconomic indicators (the dynamics of the gross domestic product, the index of industrial production, etc.

  5. Measuring Quality of Life: A New and Practical Survey Instrument.

    Science.gov (United States)

    Greenley, James R.; Greenberg, Jan Steven; Brown, Roger

    1997-01-01

    Presents a new, short, self-administered questionnaire that assesses the quality of life in seven areas. Evidence for the reliability and validity of the questionnaire was based on data gathered from 971 clients; results indicate instrument reliability. The questionnaire features low-cost administration and valid psychometric properties. (RJM)

  6. Language Awareness Surveys: A Rationale and Three Instruments.

    Science.gov (United States)

    Belanger, Joe

    Noting that language study (one leg of the traditional English tripod of language, literature, and composition) has received mixed attention internationally and is almost forgotten in North America, this paper presents a rationale for researching language awareness and three instruments that can be used in such research. The paper begins with…

  7. The SAMI Galaxy Survey: instrument specification and target selection

    CERN Document Server

    Bryant, J J; Robotham, A S G; Croom, S M; Driver, S P; Drinkwater, M J; Lorente, N P F; Cortese, L; Scott, N; Colless, M; Schaefer, A; Taylor, E N; Konstantopoulos, I S; Allen, J T; Baldry, I; Barnes, L; Bauer, A E; Bland-Hawthorn, J; Bloom, J V; Brooks, A M; Brough, S; Cecil, G; Couch, W; Croton, D; Davies, R; Ellis, S; Fogarty, L M R; Foster, C; Glazebrook, K; Goodwin, M; Green, A; Gunawardhana, M L; Hampton, E; Ho, I -T; Hopkins, A M; Kewley, L; Lawrence, J S; Leon-Saval, S G; Leslie, S; Lewis, G; Liske, J; Lopez-Sanchez, A R; Mahajan, S; Medling, A M; Metcalfe, N; Meyer, M; Mould, J; Obreschkow, D; O'Toole, S; Pracy, M; Richards, S N; Shanks, T; Sharp, R; Sweet, S M; Thomas, A D; Tonini, C; Walcher, C J

    2014-01-01

    The SAMI Galaxy Survey will observe 3400 galaxies with the Sydney-AAO Multi-object Integral-field spectrograph (SAMI) on the Anglo-Australian Telescope (AAT) in a 3-year survey which began in 2013. We present the throughput of the SAMI system, the science basis and specifications for the target selection, the survey observation plan and the combined properties of the selected galaxies. The survey includes four volume limited galaxy samples based on cuts in a proxy for stellar mass, along with low-stellar mass dwarf galaxies all selected from the Galaxy And Mass Assembly (GAMA) survey. The GAMA regions were selected because of the vast array of ancillary data available, including ultraviolet through to radio bands. These fields are on the celestial equator at 9, 12, and 14.5 hours, and cover a total of 144 square degrees (in GAMA-I). Higher density environments are also included with the addition of eight clusters. The clusters have spectroscopy from 2dFGRS and SDSS and photometry in regions covered by the Slo...

  8. Site survey instrumentation for the National New Technology Telescope (NNTT)

    Science.gov (United States)

    Forbes, F. F.; Morse, D. A.; Poczulp, G. A.

    1988-10-01

    The characterization of atmospheric turbulence at and above the two candidate sites for the 15 m National New Technology Telescope (NNTT) has required the development of specialized measurement techniques. The equipment used to measure astronomical seeing, microthermals, water vapor, and temperature is discussed, along with sample data and calibration results. By use of instruments with overlapping altitude coverage, it has been possible to 'bookkeep' qualitatively all of the sources of innate degradation, especially near the ground.

  9. School Leadership Preparation and Practice Survey Instruments and Their Uses

    Science.gov (United States)

    Pounder, Diana

    2012-01-01

    This article addresses the leadership preparation line of inquiry developed in the past decade by the University Council for Educational Administration/Learning and Teaching in Educational Leadership Special Interest Group Taskforce on Evaluating Leadership Preparation Programs, and it particularly addresses the series of survey instruments…

  10. Survey of instrumentation used for monitoring metals in water

    Energy Technology Data Exchange (ETDEWEB)

    Quinby-Hunt, M.S.

    1978-06-01

    A study was conducted of instrumentation used to determine metals in water. Several of the techniques most commonly used for analysis and routine determinations of metals in water are shown in Table 1. They are atomic absorption spectroscopy, both flame and flameless, atomic emission spectroscopy using conventional flame sources and inductively-coupled plasma sources, and ultraviolet-visible absorption techniques. Other less frequently employed methods are x-ray fluorescence analysis using both photon and charged particle excitation with energy-dispersive and wavelength-dispersive spectral analysis. Also electrochemical techniques and activation analysis are studied.

  11. The New Mexico Tech Extrasolar Spectroscopic Survey Instrument (NESSI)

    Science.gov (United States)

    Creech-Eakman, Michelle J.; Jurgenson, C.; Vasisht, G.; Swain, M.; Boston, P.; Santoro, F.

    2010-01-01

    We present the design and scientific objectives behind NESSI, a near-infrared spectroscopic purpose-built for studying exoplanet atmospheres. This instrument is being designed and assembled by a team of scientists and engineers at New Mexico Tech (NMT), the Magdalena Ridge Observatory (MRO) and NASA's Jet Propulsion Lab (JPL), and is scheduled for deployment in late 2010 at the MRO 2.4m telescope. NESSI's unique design is driven by recent space and ground-based NIR spectroscopy of exoplanet atmospheres by members of our team. Optimization of the instrument to achieve 0.01% relative accuracies in spectra of exoplanetary molecular constituents requires careful attention to certain design features and a new technical approach. We present an overview of NESSI's design, including the four major subassemblies: 1) a field derotator, 2) a reimaging module, 3) an optical guiding module, and 4) a multi-object spectrograph subassembly. We also present an overview of our science program specifically designed to build the community of exoplanet researchers and students in NM. The financial support of our team and NESSI itself have been made possible by a NM NASA EPSCoR grant, matching funds from the NMT administration, and internal support for the NESSI hardware from Dr. Van Romero, NMT's Research Vice-President.

  12. The Multi-sensor Airborne Radiation Survey (MARS) Instrument

    Energy Technology Data Exchange (ETDEWEB)

    Fast, James E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Aalseth, Craig E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Asner, David M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bonebrake, Christopher A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Day, Anthony R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dorow, Kevin E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fuller, Erin S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Glasgow, Brian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hossbach, Todd W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hyronimus, Brian J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jensen, Jeffrey L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Kenneth I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jordan, David V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Morgen, Gerald P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Morris, Scott J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mullen, O Dennis [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Myers, Allan W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pitts, W. Karl [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rohrer, John S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Runkle, Robert C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Seifert, Allen [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Shergur, Jason M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stave, Sean C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tatishvili, Gocha [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Thompson, Robert C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Todd, Lindsay C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Warren, Glen A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Willett, Jesse A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wood, Lynn S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-01-11

    The Multi-sensor Airborne Radiation Survey (MARS) project has developed a new single cryostat detector array design for high purity germanium (HPGe) gama ray spectrometers that achieves the high detection efficiency required for stand-off detection and actionable characterization of radiological threats. This approach, we found, is necessary since a high efficiency HPGe detector can only be built as an array due to limitations in growing large germanium crystals. Moreover, the system is ruggedized and shock mounted for use in a variety of field applications, including airborne and maritime operations.

  13. Measuring social exclusion in routine public health surveys: construction of a multidimensional instrument.

    Directory of Open Access Journals (Sweden)

    Addi P L van Bergen

    Full Text Available INTRODUCTION: Social exclusion is considered a major factor in the causation and maintenance of health inequalities, but its measurement in health research is still in its infancy. In the Netherlands the Institute for Social Research (SCP developed an instrument to measure the multidimensional concept of social exclusion in social and economic policy research. Here, we present a method to construct a similar measure of social exclusion using available data from public health surveys. METHODS: Analyses were performed on data from the health questionnaires that were completed by 20,877 adults in the four largest cities in the Netherlands. From each of the four questionnaires we selected the items that corresponded to those of the SCP-instrument. These were entered into a nonlinear canonical correlation analysis. The measurement properties of the resulting indices and dimension scales were assessed and compared to the SCP-instrument. RESULTS: The internal consistency of the indices and most of the dimension scales were adequate and the internal structure of the indices was as expected. Both generalisabiliy and construct validity were good: in all datasets strong associations were found between the index and a number of known risk factors of social exclusion. A limitation of content validity was that the dimension "lack of normative integration" could not be measured, because no relevant items were available. CONCLUSIONS: Our findings indicate that a measure for social exclusion can be constructed with available health questionnaires. This provides opportunities for application in public health surveillance systems in the Netherlands and elsewhere in the world.

  14. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2001-04-01

    SCK-CEN's research and development programme on instrumentation involves the assessment and the development of sensitive measurement systems used within a radiation environment. Particular emphasis is on the assessment of optical fibre components and their adaptability to radiation environments. The evaluation of ageing processes of instrumentation in fission plants, the development of specific data evaluation strategies to compensate for ageing induced degradation of sensors and cable performance form part of these activities. In 2000, particular emphasis was on in-core reactor instrumentation applied to fusion, accelerator driven and water-cooled fission reactors. This involved the development of high performance instrumentation for irradiation experiments in the BR2 reactor in support of new instrumentation needs for MYRRHA, and for diagnostic systems for the ITER reactor.

  15. Economic instruments for obesity prevention: results of a scoping review and modified delphi survey

    Directory of Open Access Journals (Sweden)

    LaFrance Jeffrey

    2011-10-01

    Full Text Available Abstract Background Comprehensive, multi-level approaches are required to address obesity. One important target for intervention is the economic domain. The purpose of this study was to synthesize existing evidence regarding the impact of economic policies targeting obesity and its causal behaviours (diet, physical activity, and to make specific recommendations for the Canadian context. Methods Arksey and O'Malley's (2005 methodological framework for conducting scoping reviews was adopted for this study and this consisted of two phases: 1 a structured literature search and review, and 2 consultation with experts in the research field through a Delphi survey and an in-person expert panel meeting in April 2010. Results Two key findings from the scoping review included 1 consistent evidence that weight outcomes are responsive to food and beverage prices. The debate on the use of food taxes and subsidies to address obesity should now shift to how best to address practical issues in designing such policies; and 2 very few studies have examined the impact of economic instruments to promote physical activity and clear policy recommendations cannot be made at this time. Delphi survey findings emphasised the relatively modest impact any specific economic instrument would have on obesity independently. Based on empirical evidence and expert opinion, three recommendations were supported. First, to create and implement an effective health filter to review new and current agricultural polices to reduce the possibility that such policies have a deleterious impact on population rates of obesity. Second, to implement a caloric sweetened beverage tax. Third, to examine how to implement fruit and vegetable subsidies targeted at children and low income households. Conclusions In terms of economic interventions, shifting from empirical evidence to policy recommendation remains challenging. Overall, the evidence is not sufficiently strong to provide clear policy

  16. Using Moodle as On-line Survey Instrument in Medical Education

    Directory of Open Access Journals (Sweden)

    Dan ISTRATE

    2013-02-01

    Full Text Available One of the principal issues in any university community is the lack of communication between community categories – leadership, administration, teaching staff and students. Sometimes is important to know in a short time the opinion of one particular group, without investing a lot of resources and without being extremely formal. The aim of this study was to test if an open-source platform – Moodle – can be used for quick surveys inside the Faculty of Medicine, UMF “Iuliu Hatieganu” Cluj-Napoca community. For this, on existing Moodle platform was installed one specific survey instrument – a questionnaire module and a survey containing a real life issue to the students of Faculty of Medicine was launched. The researchers have focused on how the specific problems of a survey - preparing of the survey, the survey process and the analysis of the results can be handle in Moodle. The pilot survey was a success; the conclusion of the study was that Moodle can be used as on-line survey instrument for that community.

  17. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2002-04-01

    SCK-CEN's R and D programme on instrumentation involves the development of advanced instrumentation systems for nuclear applications as well as the assessment of the performance of these instruments in a radiation environment. Particular emphasis is on the use of optical fibres as umbilincal links of a remote handling unit for use during maintanance of a fusion reacor, studies on the radiation hardening of plasma diagnostic systems; investigations on new instrumentation for the future MYRRHA accelerator driven system; space applications related to radiation-hardened lenses; the development of new approaches for dose, temperature and strain measurements; the assessment of radiation-hardened sensors and motors for remote handling tasks and studies of dose measurement systems including the use of optical fibres. Progress and achievements in these areas for 2001 are described.

  18. Organizational member involvement in physical activity coalitions across the United States: development and testing of a novel survey instrument for assessing coalition functioning.

    Science.gov (United States)

    Bornstein, Daniel B; Pate, Russell R; Beets, Michael W; Saunders, Ruth P; Blair, Steven N

    2015-06-01

    Coalitions are often composed of member organizations. Member involvement is thought to be associated with coalition success. No instrument currently exists for evaluating organizational member involvement in physical activity coalitions. This study aimed to develop a survey instrument for evaluating organizational member involvement in physical activity coalitions. The study was carried out in three phases: (a) developing a draft survey, (b) assessing the content validity of the draft survey, and (c) assessing the underlying factor structure, reliability, and validity of the survey. A cross-sectional design was employed. In Phase 1, a team of experts in survey development produced a draft survey. In Phase 2, the content validity of the draft survey was evaluated by a panel of individuals with expertise in physical activity coalitions. In Phase 3, the survey was administered to 120 individuals on local-, state-, and national-level physical activity coalitions. Responses were subjected to an exploratory factor analysis in order to determine the survey's underlying factor structure, reliability, and validity. Phases 1 and 2yielded a survey instrument with demonstrated content validity. Phase 3 yielded a three-factor model with three subscales: Strategic Alignment, Organizational Alignment, and Providing Input. Each subscale demonstrated high internal consistency reliability and construct validity. The survey instrument developed here demonstrated sound psychometric properties and provides new insight into organizational member involvement in physical activity coalitions. This instrument may be an important tool in developing a more complete picture of coalition functioning in physical activity coalitions specifically and health-based coalitions overall. © 2014 Society for Public Health Education.

  19. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2000-07-01

    SCK-CEN's research and development programme on instrumentation aims at evaluating the potentials of new instrumentation technologies under the severe constraints of a nuclear application. It focuses on the tolerance of sensors to high radiation doses, including optical fibre sensors, and on the related intelligent data processing needed to cope with the nuclear constraints. Main achievements in these domains in 1999 are summarised.

  20. Development and validation of a survey instrument to measure children's advertising literacy

    NARCIS (Netherlands)

    Rozendaal, E.; Opree, S.J.; Buijzen, M.A.

    2016-01-01

    The aim of this study was to develop and validate a survey measurement instrument for children's advertising literacy. Based on the multidimensional conceptualization of advertising literacy by 0056"> Rozendaal, Lapierre, Van Reijmersdal, and Buijzen (2011), 39 items were created to measure two d

  1. Establishing Educational Priorities through the Illinois Problems Index. Survey Instruments [and] User's Manual.

    Science.gov (United States)

    Illinois State Board of Education, Springfield.

    The Illinois Problems Index (IPI), a process with supporting survey instruments, enables local school districts to assess and evaluate the adequacy of current programs and services and plan improvements where problems exist. A User's Manual provides a step-by-step "walk through" of the process, while permitting alternative techniques for…

  2. Development and validation of a survey instrument to measure children's advertising literacy

    NARCIS (Netherlands)

    Rozendaal, E.; Opree, S.J.; Buijzen, M.A.

    2016-01-01

    The aim of this study was to develop and validate a survey measurement instrument for children's advertising literacy. Based on the multidimensional conceptualization of advertising literacy by 0056"> Rozendaal, Lapierre, Van Reijmersdal, and Buijzen (2011), 39 items were created to measure two

  3. Comparing NICU teamwork and safety climate across two commonly used survey instruments.

    Science.gov (United States)

    Profit, Jochen; Lee, Henry C; Sharek, Paul J; Kan, Peggy; Nisbet, Courtney C; Thomas, Eric J; Etchegaray, Jason M; Sexton, Bryan

    2016-12-01

    Measurement and our understanding of safety culture are still evolving. The objectives of this study were to assess variation in safety and teamwork climate and in the neonatal intensive care unit (NICU) setting, and compare measurement of safety culture scales using two different instruments (Safety Attitudes Questionnaire (SAQ) and Hospital Survey on Patient Safety Culture (HSOPSC)). Cross-sectional survey study of a voluntary sample of 2073 (response rate 62.9%) health professionals in 44 NICUs. To compare survey instruments, we used Spearman's rank correlation coefficients. We also compared similar scales and items across the instruments using t tests and changes in quartile-level performance. We found significant variation across NICUs in safety and teamwork climate scales of SAQ and HSOPSC (pteamwork scales (teamwork climate and teamwork within units) of the two instruments correlated strongly (safety r=0.72, pteamwork r=0.67, p<0.001). However, the means and per cent agreements for all scale scores and even seemingly similar item scores were significantly different. In addition, comparisons of scale score quartiles between the two instruments revealed that half of the NICUs fell into different quartiles when translating between the instruments. Large variation and opportunities for improvement in patient safety culture exist across NICUs. Important systematic differences exist between SAQ and HSOPSC such that these instruments should not be used interchangeably. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  4. Instruments

    Energy Technology Data Exchange (ETDEWEB)

    Buehrer, W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1996-12-31

    The present paper mediates a basic knowledge of the most commonly used experimental techniques. We discuss the principles and concepts necessary to understand what one is doing if one performs an experiment on a certain instrument. (author) 29 figs., 1 tab., refs.

  5. Consistency and validity of self-reporting scores in stress measurement surveys.

    Science.gov (United States)

    Masood, Khalid; Ahmed, Beena; Choi, Jongyong; Gutierrez-Osuna, Ricardo

    2012-01-01

    Stress has been attributed to physiological and psychological demands that exceed the natural regulatory capacity of a person. Chronic stress is not only a catalyst for diseases such as hypertension, diabetes, insomnia but may also lead to social problems such as marriage breakups, suicide and violence. Objective assessment of stress is difficult so self-reports are commonly used to indicate the severity of stress. However, empirical information on the validity of self-reports is limited. The present study investigated the authenticity and validity of different self-report surveys. An analysis, based on a three-pronged strategy, was performed on these surveys. It was concluded that although subjects are prone to systematic error in reporting, self-reports can provide a useful substitute for data modeling specifically in stress evaluation where other objective assessments such as determination of stress using only physiological response are difficult.

  6. Assessing the Learning Environment for Medical Students: An Evaluation of a Novel Survey Instrument in Four Medical Schools.

    Science.gov (United States)

    Pololi, Linda H; Evans, Arthur T; Nickell, Leslie; Reboli, Annette C; Coplit, Lisa D; Stuber, Margaret L; Vasiliou, Vasilia; Civian, Janet T; Brennan, Robert T

    2017-06-01

    A practical, reliable, and valid instrument is needed to measure the impact of the learning environment on medical students' well-being and educational experience and to meet medical school accreditation requirements. From 2012 to 2015, medical students were surveyed at the end of their first, second, and third year of studies at four medical schools. The survey assessed students' perceptions of the following nine dimensions of the school culture: vitality, self-efficacy, institutional support, relationships/inclusion, values alignment, ethical/moral distress, work-life integration, gender equity, and ethnic minority equity. The internal reliability of each of the nine dimensions was measured. Construct validity was evaluated by assessing relationships predicted by our conceptual model and prior research. Assessment was made of whether the measurements were sensitive to differences over time and across institutions. Six hundred and eighty-six students completed the survey (49 % women; 9 % underrepresented minorities), with a response rate of 89 % (range over the student cohorts 72-100 %). Internal consistency of each dimension was high (Cronbach's α 0.71-0.86). The instrument was able to detect significant differences in the learning environment across institutions and over time. Construct validity was supported by demonstrating several relationships predicted by our conceptual model. The C-Change Medical Student Survey is a practical, reliable, and valid instrument for assessing the learning environment of medical students. Because it is sensitive to changes over time and differences across institution, results could potentially be used to facilitate and monitor improvements in the learning environment of medical students.

  7. Understanding Teachers' Conceptions of Classroom Inquiry With a Teaching Scenario Survey Instrument

    Science.gov (United States)

    Kang, Nam-Hwa; Orgill, Marykay; Crippen, Kent J.

    2008-08-01

    A survey instrument using everyday teaching scenarios was developed to measure teacher conceptions of inquiry. Validity of the instrument was established by comparing responses for a group of secondary teachers to narrative writing and group discussion. Participating teachers used only three of the five essential features of inquiry detailed in the standards documents (NRC 2000) when expressing their ideas of classroom inquiry. The features of ‘evaluating explanations in connection with scientific knowledge’ and ‘communicating explanations’ were rarely mentioned. These missing components indicate a gap between the teachers’ conceptions of inquiry and the ideals of the reform movement.

  8. Shocked POststarbust Galaxy Survey I: Candidate Poststarbust Galaxies with Emission Line Ratios Consistent with Shocks

    CERN Document Server

    Alatalo, Katherine; Rich, Jeffrey A; Appleton, Philip N; Kewley, Lisa J; Lacy, Mark; Lanz, Lauranne; Medling, Anne M; Nyland, Kristina

    2016-01-01

    [Abridged] There are many mechanisms by which galaxies can transform from blue, star-forming spirals to red, quiescent early-type galaxies, but our current census of them does not form a complete picture. Recent studies of nearby case studies seem to have identified a population of galaxies that quench "quietly." Traditional poststarburst searches seem to catch galaxies only after they have quenched and transformed, and thus miss any objects with additional ionization mechanisms exciting the remaining gas. The Shocked POststarburst Galaxy Survey (SPOGS) aims to identify galaxies in an earlier phase of transformation, in which the nebular lines are excited via shocks instead of through star formation processes. Utilizing the OSSY measurements on the Sloan Digital Sky Survey Data Release 7 catalog, we applied Balmer absorption and shock boundary criteria to identify 1,067 SPOG candidates (SPOGs*) within z = 0.2. SPOGs* represent 0.7% of emission line galaxies (and 0.2% of OSSY). SPOGs* colors suggest that they ...

  9. Using a sharp instrument to parse apart strategy and consistency: an evaluation of PPT and its assumptions.

    Science.gov (United States)

    Trafimow, David; Rice, Stephen

    2011-01-01

    Potential Performance Theory (PPT) is a general theory for parsing observed performance into the underlying strategy and the consistency with which it is used. Although empirical research has supported that PPT is useful, it is desirable to have more information about the bias and standard errors of PPT findings. It also is beneficial to know the effects of violations of PPT assumptions. The authors present computer simulations that evaluate bias and standard errors at varying levels of strategy, consistency, and number of trials per participant. The simulations show that, when the assumptions are true, there is very little bias and the standard errors are low when there are moderate or large numbers of trials per participant (e.g., N=50 or N=100). But when the independence assumption is violated, PPT provides biased findings, although the bias is quite small unless the violations are large.

  10. Understanding nature's particle accelerators using high energy gamma-ray survey instruments

    Science.gov (United States)

    Abeysekara, Anushka Udara

    Nature's particle accelerators, such as Pulsars, Pulsar Wind Nebulae, Active Galactic Nuclei and Supernova Remnants accelerate charged particles to very high energies that then produce high energy photons. The particle acceleration mechanisms and the high energy photon emission mechanisms are poorly understood phenomena. These mechanisms can be understood either by studying individual sources in detail or, alternatively, using the collective properties of a sample of sources. Recent development of GeV survey instruments, such as Fermi-LAT, and TeV survey instruments, such as Milagro, provides a large sample of high energy gamma-ray flux measurements from galactic and extra-galactic sources. In this thesis I provide constraints on GeV and TeV radiation mechanisms using the X-ray-TeV correlations and GeV-TeV correlations. My data sample was obtained from three targeted searches for extragalactic sources and two targeted search for galactic sources, using the existing Milagro sky maps. The first extragalactic candidate list consists of Fermi-LAT GeV extragalactic sources, and the second extragalactic candidate list consists of TeVCat extragalactic sources that have been detected by Imaging Atmospheric Cerenkov Telescopes (IACTs). In both extragalactic candidate lists Markarian 421 was the only source detected by Milagro. A comparison between the Markarian 421 time-averaged flux, measured by Milagro, and the flux measurements of transient states, measured by IACTs, is discussed. The third extragalactic candidate list is a list of potential TeV emitting BL Lac candidates that was synthesized using X-ray observations of BL Lac objects and a Synchrotron Self-Compton model. Milagro's sensitivity was not sufficient to detect any of those candidates. However, the 95% confidence flux upper limits of those sources were above the predicted flux. Therefore, these results provide evidence to conclude that the Synchrotron Self-Compton model for BL Lac objects is still a viable

  11. Evaluation of a Brief Survey Instrument for Assessing Subtle Differences in Cognitive Function Among Older Adults.

    Science.gov (United States)

    Kotwal, Ashwin A; Schumm, Philip; Kern, David W; McClintock, Martha K; Waite, Linda J; Shega, Joseph W; Huisingh-Scheetz, Megan J; Dale, William

    2015-01-01

    Most measures of cognitive function used in large-scale surveys of older adults have limited ability to detect subtle differences across cognitive domains, and standard clinical instruments are impractical to administer in general surveys. The Montreal Cognitive Assessment (MoCA) can address this need, but has limitations in a survey context. Therefore, we developed a survey adaptation of the MoCA, called the MoCA-SA, and describe its psychometric properties in a large national survey. Using a pretest sample of older adults (n=120), we reduced MoCA administration time by 26%, developed a model to accurately estimate full MoCA scores from the MoCA-SA, and tested the model in an independent clinical sample (n=93). The validated 18-item MoCA-SA was then administered to community-dwelling adults aged 62 to 91 as part of the National Social life Health and Aging Project Wave 2 sample (n=3196). In National Social life Health and Aging Project Wave 2, the MoCA-SA had good internal reliability (Cronbach α=0.76). Using item-response models, survey-adapted items captured a broad range of cognitive abilities and functioned similarly across sex, education, and ethnic groups. Results demonstrate that the MoCA-SA can be administered reliably in a survey setting while preserving sensitivity to a broad range of cognitive abilities and similar performance across demographic subgroups.

  12. Internal consistency and test-retest reliability of an instrumented functional reaching task using wireless electromyographic sensors.

    Science.gov (United States)

    Varghese, Rini; Hui-Chan, Christina W Y; Wang, Edward; Bhatt, Tanvi

    2014-10-01

    The purpose of this study was to establish the internal consistency and test-retest reliability of the electromyographic and accelerometric data sampled from the prime movers of the dominant arm during an antigravity, within-arm's length stand-reaching task without trunk restraint. Ten healthy young adults participated in two experimental sessions, approximately 7-10days apart. During each session, subjects performed 15 trials of both a flexion- and an abduction-reaching task. Surface EMG and acceleration using wireless sensors were sampled from the anterior and middle deltoid. Reliability was established using Cronbach's alpha, intraclass correlation coefficients (ICC 2, k) and standard error of measurements (SEM) for electromyographic reaction time, burst duration and normalized amplitude along with peak acceleration. Results indicated high degrees of inter-trial and test-retest reliability for flexion (Cronbach's α range=0.92-0.99; ICC range=0.82-0.92) as well as abduction (Cronbach's α range=0.94-0.99; ICC range=0.81-0.94) reaching. The SEM associated with response variables for flexion and abduction ranged from 1.55-3.26% and 3.33-3.95% of means, respectively. Findings from this study revealed that electromyographic and accelerometric data collected from prime movers of the arm during the relatively functional stand-reaching task were highly reproducible. Given its high reliability and portability, the proposed test could have applications in clinical and laboratory settings to quantify upper limb function.

  13. Advanced Camera for Surveys Instrument Handbook for Cycle 25 v. 16.0

    Science.gov (United States)

    Avila, R. J.

    2017-01-01

    The Advanced Camera for Surveys (ACS), a third-generation instrument, was installed in the Hubble Space Telescope during Servicing Mission 3B, on March 7, 2002. Its primary purpose was to increase HST imaging discovery efficiency by about a factor of 10, with a combination of detector area and quantum efficiency that surpasses previous instruments. ACS has three independent cameras that have provided wide-field, high resolution, and ultraviolet imaging capabilities respectively, using a broad assortment of filters designed to address a large range of scientific goals. In addition, coronagraphic, polarimetric, and grism capabilities have made the ACS a versatile and powerful instrument. The ACS Instrument Handbook, which is maintained by the ACS Team at STScI, descr ibes the instrument properties, performance, operations, and calibration. It is the basic technical reference manual for the instrument, and should be used with other documents (listed in Table 1.1) for writing Phase I proposals, detailed Phase II programs, and for data analysis. (See Figure 1.1). In May 2009, Servicing Mission 4 (SM4) successfully restored the ACS Wide Field Camera (WFC) to regular service after its failure in January 2007. Unfortunately, the ACS High Resolution Camera (HRC) was not restored to operation during SM4, so it cannot be proposed for new observations. Nevertheless, this handbook retains description of the HRC to support analysis of archived observations. The ACS Solar Blind Channel (SBC) was unaffected by the January 2007 failure of WFC and HRC. The SBC has remained in steady operation, and was not serviced during SM4. It remains available for new observations.

  14. The Dark Energy Spectroscopic Instrument (DESI): Science from the DESI Survey

    Science.gov (United States)

    Eisenstein, Daniel; DESI Collaboration

    2015-01-01

    The Dark Energy Spectroscopic Instrument (DESI) will enable an ambitious redshift survey to probe dark energy by the baryon acoustic oscillation and redshift-space distortion methods. The same data set will serve numerous other goals in cosmology and astrophysics. Using a new 5000-fiber instrument and 8 square degree field of view at the Mayall telescope, the DESI survey plans to cover 14,000 square degrees and about 25 million high-redshift objects. The targets include 4M luminous red galaxies (redshift 0.4-1.0), 18M emission line galaxies (redshift 0.6-1.6), and 2.4M quasars, including 0.7M Lyman-alpha forest sight lines. With this, DESI can map the expansion history of the Universe to redshift 3, achieving unprecedented performance from the baryon acoustic oscillation method. We will describe the present state of the survey design and the cosmological forecasts for dark energy, inflation, and neutrino physics. We also give an update on the DESI Science Collaboration.

  15. The Application of Surveying Biochemistry Light Instrument in the Reaction System of Starch with Mn3+

    Institute of Scientific and Technical Information of China (English)

    Gu Zhengbiao; Wu Jiagen

    2000-01-01

    The possibility of the application of Surveying Biochemistry Light Instrument (SBLI) in the reaction system of starch with Mn3+was studied. The results showed: neither starch nor initiator(Mn3+) could produce light because no factor that could produce light existed in them. But starch could produce light when it was acted by Mn3 + and the intensity of light depended on the kind and concentration of starch, the amount of Mn3 +, the temperature and pH of the reaction system. In addition, the intensity of light decreased with the reaction time because of the gradual disappearance of starch free radicals.

  16. Creation and Use of a Survey Instrument for Comparing Mobile Computing Devices

    Science.gov (United States)

    Macri, Jennifer M.; Lee, Paul P.; Silvey, Garry M.; Lobach, David F.

    2005-01-01

    Both personal digital assistants (PDAs) and tablet computers have emerged to facilitate data collection at the point of care. However, little research has been reported comparing these mobile computing devices in specific care settings. In this study we present an approach for comparing functionally identical applications on a Palm operating system-based PDA and a Windows-based tablet computer for point-of-care documentation of clinical observations by eye care professionals when caring for patients with diabetes. Eye-care professionals compared the devices through focus group sessions and through validated usability surveys. This poster describes the development and use of the survey instrument used for comparing mobile computing devices. PMID:16779327

  17. Assessing or Reaffirming Accreditation Criteria for the Southern Association of Colleges and Schools (SACS): Development of an Alumni Survey Instrument.

    Science.gov (United States)

    Johnson, William L.; Johnson, Annabel M.

    The "Criteria for Accreditation" (1991) and reaffirmation published by the Southern Association of Colleges and Schools were validated through a survey of alumni. The criteria were developed to assist institutions in evaluating their effectiveness. In all, 2,300 survey instruments were mailed to college alumni in the United States. Of…

  18. Predicting Student Performance in Web-Based Distance Education Courses Based on Survey Instruments Measuring Personality Traits and Technical Skills

    Science.gov (United States)

    Hall, Michael

    2008-01-01

    Two common web-based surveys, "Is Online Learning Right for Me?' and "What Technical Skills Do I Need?", were combined into a single survey instrument and given to 228 on-campus and 83 distance education students. The students were enrolled in four different classes (business, computer information services, criminal justice, and…

  19. Psychometric properties of the Dutch version of the hospital-level consumer assessment of health plans survey (R) instrument

    NARCIS (Netherlands)

    O.A. Arah; A.H.A. ten Asbroek; D.M.J. Delnoij; J.S. de Koning; P.J.A. Stam; A.H. Poll; B. Vriens; P.F. Schmidt; N.S. Klazinga

    2006-01-01

    Objectives. To assess the reliability and validity of a translated version of the American Hospital-level Consumer Assessment of Health Plans Survey (R) (H-CAHPS) instrument for use in Dutch health care. Data Sources/Study Setting. Primary survey data from adults aged 18 years or more who were recen

  20. Development and testing of a survey instrument to measure benefits of a nursing information system.

    Science.gov (United States)

    Abdrbo, Amany A; Zauszniewski, Jaclene A; Hudak, Christine A; Anthony, Mary K

    2011-01-01

    Information systems (IS) benefits for nurses are outcomes related to the tangible products or improvements that nurses realize from using IS. This study examined the development and psychometric testing of a measure of nurses' benefits from IS. A random sample of 570 nurses working in hospitals, providing direct patient care, and using IS completed the study questionnaire. The internal consistency reliability of the results was .97. Exploratory factor analysis, using principal components extraction and varimax rotation, revealed items loaded on four factors (saving time and efficiency, quality of care, charting, and professional practice) that were confirmed by confirmatory factor analysis. Continued refinement of the instrument is needed with more diverse samples of nurses.

  1. Survey Instruments for Knowledge, Skills, Attitudes and Behaviour Related to Evidence-based Practice in Occupational Therapy: A Systematic Review.

    Science.gov (United States)

    Buchanan, Helen; Siegfried, Nandi; Jelsma, Jennifer

    2016-06-01

    The purpose of this study was to evaluate, through a systematic review, assessment instruments for evidence-based practice (EBP). The specific objectives were to (1) identify survey instruments testing EBP knowledge, skills, attitudes and behaviour; (2) determine the attributes measured by each instrument; (3) evaluate the psychometric properties of the instruments; and (4) evaluate the methodological quality of the instruments. Using the Cochrane approach, searches were conducted in Pubmed, EBSCOHost and Scopus from inception to February 2014. Papers were screened by two independent assessors, and data were extracted by one researcher. Forty papers reporting 34 instruments met the inclusion criteria and were included in the qualitative synthesis. Most instruments measured EBP behaviour (n = 33) and attitudes (n = 21). This review provides a single source of information to enable researchers to select the most robust descriptive instruments to measure EBP learner attributes. Instruments used only with occupational therapists may have resulted in some instruments being missed. For further research, it is recommended that attention is given to developing objective instruments with a focus on knowledge and skills. Copyright © 2015 John Wiley & Sons, Ltd.

  2. Survey Instrument Development for Consumer Perception Testing to RTE Product in Convenience Store

    Directory of Open Access Journals (Sweden)

    Dyah Lestari Widaningrum

    2015-09-01

    Full Text Available Global trade and the abolition of trade barriers lead to the proliferation of imported food products such as various types of fast food products (RTE: ready-to-eat food sold by convenience stores mainly scattered in Jakarta. The question is what causes consumers choose certain convenience store to buy RTE Product and not choose another outlet category. To understand consumer perceptions, it is necessary to develop an instrument for measuring consumer perceptions of the option to purchase RTE Product at convenience stores. Variables used in this research are the perception and knowledge of the public/consumers against food safety, store attributes, service, and product attributes. The instrument used in this study is a questionnaire with a scalemeasuring1-5 to see the relationship between variables, we used the method of Structural Equation Modeling (SEM. The sample used in this study was 223 respondents that were divided into five areas in Jakarta, namely Central Jakarta, West Jakarta, South Jakarta, East Jakarta, and North Jakarta. The final outcome of the instrument development process was 25 observed variables, consisting of 4 indicators, which valid and reliable, with T-values for each observed variable is above 2,58, and Construct Reliability values range between 0,76 to 0,853.

  3. The factorial validity and internal consistency of the Instrumental Activities of Daily Living Profile in individuals with a traumatic brain injury.

    Science.gov (United States)

    Bottari, Carolina; Dassa, Clement; Rainville, Constant; Dutil, Elisabeth

    2009-04-01

    The objective of the study was to investigate the factorial validity and internal consistency of the Instrumental Activities of Daily Living (IADL) Profile. A group of 96 patients aged 16 to 65 years, with moderate to severe traumatic brain injuries, was recruited from 12 rehabilitation hospitals in Quebec. The IADL Profile was administered by an occupational therapist in each subject's home and community environment. Principal axis factoring and confirmatory factor analysis provide preliminary support for six correlated factors (F): (F1) going to grocery store/shopping for groceries, (F2) having a meal with guests/cleaning up, (F3) putting on outdoor clothing, (F4) obtaining information, (F5) making a budget, (F6) preparing a hot meal for guests. Total explained variance was 73.6%. Cronbach's alpha analysis revealed high to very high internal consistency for all scales ranging from .81 to .98; internal consistency of the total scale was very high (0.95). The findings suggest that the IADL Profile is a promising means of documenting both IADL independence and the repercussions of executive function deficits on everyday tasks in real-world environments.

  4. Consistently low prevalence of syphilis among female sex workers in Jinan, China: findings from two consecutive respondent driven sampling surveys.

    Directory of Open Access Journals (Sweden)

    Meizhen Liao

    Full Text Available BACKGROUND: Routine surveillance using convenient sampling found low prevalence of HIV and syphilis among female sex workers in China. Two consecutive surveys using respondent driven sampling were conducted in 2008 and 2009 to examine the prevalence of HIV and syphilis among female sex workers in Jinan, China. METHODS: A face-to-face interview was conducted to collect demographic, behavioral and service utilization information using a structured questionnaire. Blood samples were drawn for serological tests of HIV-1 antibody and syphilis antibody. Respondent Driven Sampling Analysis Tool was used to generate population level estimates. RESULTS: In 2008 and in 2009, 363 and 432 subjects were recruited and surveyed respectively. Prevalence of syphilis was 2.8% in 2008 and 2.2% in 2009, while no HIV case was found in both years. Results are comparable to those from routine sentinel surveillance system in the city. Only 60.8% subjects in 2008 and 48.3% in 2009 reported a consistent condom use with clients during the past month. Over 50% subjects had not been covered by any HIV-related services in the past year, with only 15.6% subjects in 2008 and 13.1% in 2009 ever tested for HIV. CONCLUSIONS: Despite the low prevalence of syphilis and HIV, risk behaviors are common. Targeted interventions to promote the safe sex and utilization of existing intervention services are still needed to keep the epidemic from growing.

  5. The Gaia spectrophotometric standard stars survey -II. Instrumental effects of six ground-based observing campaigns

    CERN Document Server

    Altavilla, G; Pancino, E; Galleti, S; Ragaini, S; Bellazzini, M; Cocozza, G; Bragaglia, A; Carrasco, J M; Castro, A; Di Fabrizio, L; Federici, L; Figueras, F; Gebran, M; Jordi, C; Masana, E; Schuster, W; Valentini, G; Voss, H

    2015-01-01

    The Gaia SpectroPhotometric Standard Stars (SPSS) survey started in 2006, it was awarded almost 450 observing nights, and accumulated almost 100,000 raw data frames, with both photometric and spectroscopic observations. Such large observational effort requires careful, homogeneous, and automated data reduction and quality control procedures. In this paper, we quantitatively evaluate instrumental effects that might have a significant (i.e.,$\\geq$1%) impact on the Gaia SPSS flux calibration. The measurements involve six different instruments, monitored over the eight years of observations dedicated to the Gaia flux standards campaigns: DOLORES@TNG in La Palma, EFOSC2@NTT and ROSS@REM in La Silla, CAFOS@2.2m in Calar Alto, BFOSC@Cassini in Loiano, and LaRuca@1.5m in San Pedro Martir. We examine and quantitatively evaluate the following effects: CCD linearity and shutter times, calibration frames stability, lamp flexures, second order contamination, light polarization, and fringing. We present methods to correct ...

  6. Dental Management Survey Brazil (DMS-BR): creation and validation of a management instrument

    Science.gov (United States)

    Gonzales, Paola Sampaio; Martins, Ismar Eduardo; Biazevic, Maria Gabriela Haye; Silva, Paulo Roberto da; Michel-Crosato, Edgard

    2017-04-10

    Questionnaires for the assessment of knowledge and self-perception can be useful to diagnose what a dentist knows about management and administration. The aim of the present study was to create and validate the Dental Management Survey Brazil (DMS-BR) scale, based on meetings with experts in the field. After having elaborated the first version, 10 audits were performed in dental offices in order to produce the final version, which included nine dimensions: location, patient, finance, marketing, competition, quality, staff, career, and productivity. The accuracy of the instrument was measured by intrarater and interrater reliability. In the validation phase, 247 Brazilian dentists answered a web-based questionnaire. The data were processed using Stata 13.0 and the significance level was set at 95%. The instrument had intrarater and interrater reliability (ICC-0.93 and 0.94). The overall average of respondents for the DMS-BR scale was 3.77 (SD = 0.45). Skewness and kurtosis were below absolute values 3 and 7, respectively. Internal validity measured by Cronbach's alpha was 0.925 and the correlation of each dimension with the final result of the DMS-BR ranged between 0.606 and 0.810. Correlation with the job satisfaction scale was 0.661. The SEM data ranged between 0.80 and 0.56. The questionnaire presented satisfactory indicators of dentists' self-perception about management and administration activities.

  7. Mechanical Design of NESSI: New Mexico Tech Extrasolar Spectroscopic Survey Instrument

    Science.gov (United States)

    Santoro, Fernando G.; Olivares, Andres M.; Salcido, Christopher D.; Jimenez, Stephen R.; Jurgenson, Colby A.; Hrynevych, Michael A.; Creech-Eakman, Michelle J.; Boston, Penny J.; Schmidt, Luke M.; Bloemhard, Heather; Rodeheffer, Dan; Vaive, Genevieve; Vasisht, Gautam; Swain, Mark R.; Deroo, Pieter

    2011-01-01

    NESSI: the New Mexico Tech Extrasolar Spectroscopic Survey Instrument is a ground-based multi-object spectrograph that operates in the near-infrared. It will be installed on one of the Nasmyth ports of the Magdalena Ridge Observatory (MRO) 2.4-meter Telescope sited in the Magdalena Mountains, about 48 km west of Socorro-NM. NESSI operates stationary to the telescope fork so as not to produce differential flexure between internal opto-mechanical components during or between observations. An appropriate mechanical design allows the instrument alignment to be highly repeatable and stable for both short and long observation timescales, within a wide-range of temperature variation. NESSI is optically composed of a field lens, a field de-rotator, re-imaging optics, an auto-guider and a Dewar spectrograph that operates at LN2 temperature. In this paper we report on NESSI's detailed mechanical and opto-mechanical design, and the planning for mechanical construction, assembly, integration and verification.

  8. Shocked POststarbust Galaxy Survey. I. Candidate Post-starbust Galaxies with Emission Line Ratios Consistent with Shocks

    Science.gov (United States)

    Alatalo, Katherine; Cales, Sabrina L.; Rich, Jeffrey A.; Appleton, Philip N.; Kewley, Lisa J.; Lacy, Mark; Lanz, Lauranne; Medling, Anne M.; Nyland, Kristina

    2016-06-01

    There are many mechanisms by which galaxies can transform from blue, star-forming spirals, to red, quiescent early-type galaxies, but our current census of them does not form a complete picture. Recent observations of nearby case studies have identified a population of galaxies that quench “quietly.” Traditional poststarburst searches seem to catch galaxies only after they have quenched and transformed, and thus miss any objects with additional ionization mechanisms exciting the remaining gas. The Shocked POststarburst Galaxy Survey (SPOGS) aims to identify transforming galaxies, in which the nebular lines are excited via shocks instead of through star formation processes. Utilizing the Oh-Sarzi-Schawinski-Yi (OSSY) measurements on the Sloan Digital Sky Survey Data Release 7 catalog, we applied Balmer absorption and shock boundary criteria to identify 1067 SPOG candidates (SPOGs*) within z = 0.2. SPOGs* represent 0.2% of the OSSY sample galaxies that exceed the continuum signal-to-noise cut (and 0.7% of the emission line galaxy sample). SPOGs* colors suggest that they are in an earlier phase of transition than OSSY galaxies that meet an “E+A” selection. SPOGs* have a 13% 1.4 GHz detection rate from the Faint Images of the Radio Sky at Twenty Centimeters Survey, higher than most other subsamples, and comparable only to low-ionization nuclear emission line region hosts, suggestive of the presence of active galactic nuclei (AGNs). SPOGs* also have stronger Na i D absorption than predicted from the stellar population, suggestive of cool gas being driven out in galactic winds. It appears that SPOGs* represent an earlier phase in galaxy transformation than traditionally selected poststarburst galaxies, and that a large proportion of SPOGs* also have properties consistent with disruption of their interstellar media, a key component to galaxy transformation. It is likely that many of the known pathways to transformation undergo a SPOG phase. Studying this sample of

  9. A frailty instrument for primary care: findings from the Survey of Health, Ageing and Retirement in Europe (SHARE).

    LENUS (Irish Health Repository)

    Romero-Ortuno, Roman

    2010-01-01

    A frailty paradigm would be useful in primary care to identify older people at risk, but appropriate metrics at that level are lacking. We created and validated a simple instrument for frailty screening in Europeans aged ≥50. Our study is based on the first wave of the Survey of Health, Ageing and Retirement in Europe (SHARE, http:\\/\\/www.share-project.org), a large population-based survey conducted in 2004-2005 in twelve European countries.

  10. Patient experience and satisfaction with inpatient service: development of short form survey instrument measuring the core aspect of inpatient experience.

    Directory of Open Access Journals (Sweden)

    Eliza L Y Wong

    Full Text Available Patient experience reflects quality of care from the patients' perspective; therefore, patients' experiences are important data in the evaluation of the quality of health services. The development of an abbreviated, reliable and valid instrument for measuring inpatients' experience would reflect the key aspect of inpatient care from patients' perspective as well as facilitate quality improvement by cultivating patient engagement and allow the trends in patient satisfaction and experience to be measured regularly. The study developed a short-form inpatient instrument and tested its ability to capture a core set of inpatients' experiences. The Hong Kong Inpatient Experience Questionnaire (HKIEQ was established in 2010; it is an adaptation of the General Inpatient Questionnaire of the Care Quality Commission created by the Picker Institute in United Kingdom. This study used a consensus conference and a cross-sectional validation survey to create and validate a short-form of the Hong Kong Inpatient Experience Questionnaire (SF-HKIEQ. The short-form, the SF-HKIEQ, consisted of 18 items derived from the HKIEQ. The 18 items mainly covered relational aspects of care under four dimensions of the patient's journey: hospital staff, patient care and treatment, information on leaving the hospital, and overall impression. The SF-HKIEQ had a high degree of face validity, construct validity and internal reliability. The validated SF-HKIEQ reflects the relevant core aspects of inpatients' experience in a hospital setting. It provides a quick reference tool for quality improvement purposes and a platform that allows both healthcare staff and patients to monitor the quality of hospital care over time.

  11. Ergonomics and design of laparoscopic instruments: results of a survey among laparoscopic surgeons.

    Science.gov (United States)

    Van Veelen, M A; Meijer, D W

    1999-12-01

    This study determined which types of laparoscopic instruments are most often used in Europe, why they are being used, and what problems exist while using the instruments. The handles were also evaluated according to ergonomic design criteria. A questionnaire was send to 62 experienced surgeons in 19 countries. The laparoscopic instruments were divided into four groups: instruments with similar functionality and handgrip model were grouped together. Eight questions were asked for every group about the type of instrument (disposable, reusable, or semireusable), the type of handle, the reason for using a specific instrument, and the experience of discomfort while using the instrument. The handles of the instruments of the group that were associated with the greatest discomfort were ergonomically evaluated on eight aspects (dimensions, angles, and control). Half of the questionnaires were returned. In every group, about 80% of the instruments the surgeons employed were reusable. The chief reason for using a specific type was the good cost-quality of the product and satisfying experiences with other products of the brand. The discomfort was pressure on thumb and fingers (scissors handle) and fixating the tip (ratchet). The handle of the instruments that causes the most discomfort met only three of the eight ergonomic requirements. Most of the laparoscopic instruments employed by surgeons in Europe are reusable. A significant number of the instruments cause discomfort. These instruments do not meet standard ergonomic requirements.

  12. Truth or Consequences: The Intertemporal Consistency of Adolescent Self-report on the Youth Risk Behavior Survey

    OpenAIRE

    Rosenbaum, Janet E.

    2009-01-01

    Surveys are the primary information source about adolescents’ health risk behaviors, but adolescents may not report their behaviors accurately. Survey data are used for formulating adolescent health policy, and inaccurate data can cause mistakes in policy creation and evaluation. The author used test-retest data from the Youth Risk Behavior Survey (United States, 2000) to compare adolescents’ responses to 72 questions about their risk behaviors at a 2-week interval. Each question was evaluate...

  13. Avionics Instrument Systems Specialist Career Ladder: AFSCs 32531, 32551, 31571, and 32591. Occupational Survey Report.

    Science.gov (United States)

    Air Force Occupational Measurement Center, Lackland AFB, TX.

    The Avionics Instrument Systems career ladder (AFSC 325X1) provides flight line and shop maintenance training on aircraft instrument systems, electromechancial instruments, components, and test equipment. Duties involve inspecting, removing, installing, repairing, operating, troubleshooting, overhauling, and modifying systems such as flight and…

  14. GASS: The Parkes Galactic All-Sky Survey. Update: improved correction for instrumental effects and new data release

    CERN Document Server

    Kalberla, Peter M W

    2015-01-01

    The Galactic All-Sky Survey is a survey of Galactic atomic hydrogen emission in the southern sky observed with the Parkes 64-m Radio Telescope. The first data release (GASS I) concerned survey goals and observing techniques, the second release (GASS II) focused on stray radiation and instrumental corrections. We seek to remove the remaining instrumental effects and present a third data release. We use the HEALPix tessellation concept to grid the data on the sphere. Individual telescope records are compared with averages on the nearest grid position for significant deviations. All averages are also decomposed into Gaussian components with the aim of segregating unacceptable solutions. Improved priors are used for an iterative baseline fitting and cleaning. In the last step we generate 3-D FITS data cubes and examine them for remaining problems. We have removed weak, but systematic baseline offsets with an improved baseline fitting algorithm. We have unraveled correlator failures that cause time dependent oscil...

  15. New Instruments for Survey: on Line Softwares for 3d Recontruction from Images

    Science.gov (United States)

    Fratus de Balestrini, E.; Guerra, F.

    2011-09-01

    3d scanning technologies had a significant development and have been widely used in documentation of cultural, architectural and archeological heritages. Modern methods of three-dimensional acquiring and modeling allow to represent an object through a digital model that combines visual potentialities of images (normally used for documentation) to the accuracy of the survey, becoming at the same time support for the visualization that for metric evaluation of any artefact that have an historical or artistic interest, opening up new possibilities for cultural heritage's fruition, cataloging and study. Despite this development, because of the small catchment area and the 3D laser scanner's sophisticated technologies, the cost of these instruments is very high and beyond the reach of most operators in the field of cultural heritages. This is the reason why they have appeared low-cost technologies or even free, allowing anyone to approach the issues of acquisition and 3D modeling, providing tools that allow to create three-dimensional models in a simple and economical way. The research, conducted by the Laboratory of Photogrammetry of the University IUAV of Venice, of which we present here some results, is intended to figure out whether, with Arc3D, it is possible to obtain results that can be somehow comparable, in therms of overall quality, to those of the laser scanner, and/or whether it is possible to integrate them. They were carried out a series of tests on certain types of objects, models made with Arc3D, from raster images, were compared with those obtained using the point clouds from laser scanner. We have also analyzed the conditions for an optimal use of Arc3D: environmental conditions (lighting), acquisition tools (digital cameras) and type and size of objects. After performing the tests described above, we analyzed the patterns generated by Arc3D to check what other graphic representations can be obtained from them: orthophotos and drawings. The research

  16. NEW INSTRUMENTS FOR SURVEY: ON LINE SOFTWARES FOR 3D RECONTRUCTION FROM IMAGES

    Directory of Open Access Journals (Sweden)

    E. Fratus de Balestrini

    2012-09-01

    Full Text Available 3d scanning technologies had a significant development and have been widely used in documentation of cultural, architectural and archeological heritages. Modern methods of three-dimensional acquiring and modeling allow to represent an object through a digital model that combines visual potentialities of images (normally used for documentation to the accuracy of the survey, becoming at the same time support for the visualization that for metric evaluation of any artefact that have an historical or artistic interest, opening up new possibilities for cultural heritage's fruition, cataloging and study. Despite this development, because of the small catchment area and the 3D laser scanner's sophisticated technologies, the cost of these instruments is very high and beyond the reach of most operators in the field of cultural heritages. This is the reason why they have appeared low-cost technologies or even free, allowing anyone to approach the issues of acquisition and 3D modeling, providing tools that allow to create three-dimensional models in a simple and economical way. The research, conducted by the Laboratory of Photogrammetry of the University IUAV of Venice, of which we present here some results, is intended to figure out whether, with Arc3D, it is possible to obtain results that can be somehow comparable, in therms of overall quality, to those of the laser scanner, and/or whether it is possible to integrate them. They were carried out a series of tests on certain types of objects, models made with Arc3D, from raster images, were compared with those obtained using the point clouds from laser scanner. We have also analyzed the conditions for an optimal use of Arc3D: environmental conditions (lighting, acquisition tools (digital cameras and type and size of objects. After performing the tests described above, we analyzed the patterns generated by Arc3D to check what other graphic representations can be obtained from them: orthophotos and drawings

  17. Development and Validation of an Instrument for Assessing Climate Change Knowledge and Perceptions: The Climate Stewardship Survey (CSS)

    OpenAIRE

    Scott L. WALKER; McNeal, Karen S

    2013-01-01

    The Climate Stewardship Survey (CSS) was developed to measure knowledge and perceptions of global climate change, while also considering information sources that respondents ‘trust.’ The CSS was drafted using a three-stage approach: development of salient scales, writing individual items, and field testing and analyses. Construct validity and alpha-level reliability was conducted on the 122-item test instrument to produce a refined 84-item CSS.  The field tested C...

  18. Temperature performance of portable radiation survey instruments used for environmental monitoring and clean-up activities in Fukushima

    Science.gov (United States)

    Saegusa, Jun; Yanagisawa, Kayo; Hasumi, Atsushi; Shimizu, Takenori; Uchita, Yoshiaki

    2017-08-01

    Following the Fukushima Dai-ichi Nuclear Power Plant accident in March 2011, extensive radiation monitoring and environmental clean-up activities have been conducted throughout the Fukushima region. Outside air temperatures there reach 40 °C in summer and -20 °C in winter, which are beyond the quoted operational range of many radiation survey instruments. Herein, temperature performance of four types of portable Japanese radiation survey instruments widely used in Fukushima was experimentally investigated using a temperature-controlled chamber. They included two ionization chamber type instruments, Fuji NHA1 and Aloka ICS-323C, and two NaI(Tl) scintillation type ones, Fuji NHC7 and Aloka TCS-172B. Experimental results showed significantly diverse characteristics on the temperature dependences from one type of instrument to another. For example, NHA1 overestimated the ambient dose-equivalent rate by as much as 17% at -30 °C and 10% at 40 °C, whereas the TCS-172B readings underestimated the rate by 30% at -30 °C and 7% at 40 °C.

  19. Program Evaluation Using the Project Dakota Parent Satisfaction Survey. A Manual for Administration and Interpretation of Findings Using a Validated Instrument.

    Science.gov (United States)

    Kovach, JoAnne; Jacks, Robert

    This manual presents an instrument (the Dakota Parent Satisfaction Survey) and procedures for evaluating parent satisfaction with early intervention programs. The survey procedures have been used to evaluate seven early intervention programs each year since 1985. Development of the Survey is discussed, including the identification of program…

  20. Nutrition knowledge and Mediterranean diet adherence in the southeast United States: Validation of a field-based survey instrument.

    Science.gov (United States)

    Bottcher, Mary Rose; Marincic, Patricia Z; Nahay, Katie L; Baerlocher, Brittany E; Willis, Amy W; Park, Jieun; Gaillard, Philippe; Greene, Michael W

    2017-04-01

    The Mediterranean diet (MD) can reduce chronic disease risk and is a recommended diet for prevention and management of diabetes. Adherence to the MD in the southeast United States where obesity and diabetes are highly prevalent is unknown. The purpose of the present study was to: 1) construct a survey instrument relevant to the general population integrating both MD related nutrition knowledge and adherence questions from previously validated instruments, and 2) assess MD related nutrition knowledge and adherence in a sample population in the southest United States. Adherance was assessed using the validated short MD Adherence Screener (MEDAS). A MD nutrition knowledge (MDNK) questionnaire was developed from previously validated general nutrition knowledge questionnaires and was validated using 127 university students enrolled in three courses with varying levels of nutrition education. Cronbach's α for internal validity of MDNK was acceptable for a short questionnaire (0.653). Test-retest reliability was established (r = 0.853). Field validation of the three-part survey instrument (MEDAS, MDNK and demographic questions) was subsequently performed in 230 adults shopping at supermarkets and farmers markets in eastern Alabama. Total MDNK and MEDAS scores were significantly higher in students with formal nutrition education and in patrons of farmers markets. Greater MD adherence, assessed by dividing MEDAS scores into thirds, was found with increasing formal nutrition education in university students (p = 0.002) and in farmers market participants (p < 0.001). There was a weak but significant association between MDNK and MEDAS scores within university students and participants in the field. Together, the MDNK-MEDAS survey instrument is an effective tool for assessing baseline knowledge and adherence and can be used to target nutritional interventions to improve MD adherence for prevention and management of diabetes and other chronic disease.

  1. Measuring children's self-reported sport participation, risk perception and injury history: development and validation of a survey instrument.

    Science.gov (United States)

    Siesmaa, Emma J; Blitvich, Jennifer D; White, Peta E; Finch, Caroline F

    2011-01-01

    Despite the health benefits associated with children's sport participation, the occurrence of injury in this context is common. The extent to which sport injuries impact children's ongoing involvement in sport is largely unknown. Surveys have been shown to be useful for collecting children's injury and sport participation data; however, there are currently no published instruments which investigate the impact of injury on children's sport participation. This study describes the processes undertaken to assess the validity of two survey instruments for collecting self-reported information about child cricket and netball related participation, injury history and injury risk perceptions, as well as the reliability of the cricket-specific version. Face and content validity were assessed through expert feedback from primary and secondary level teachers and from representatives of peak sporting bodies for cricket and netball. Test-retest reliability was measured using a sample of 59 child cricketers who completed the survey on two occasions, 3-4 weeks apart. Based on expert feedback relating to face and content validity, modification and/or deletion of some survey items was undertaken. Survey items with low test-retest reliability (κ≤0.40) were modified or deleted, items with moderate reliability (κ=0.41-0.60) were modified slightly and items with higher reliability (κ≥0.61) were retained, with some undergoing minor modifications. This is the first survey of its kind which has been successfully administered to cricketers aged 10-16 years to collect information about injury risk perceptions and intentions for continued sport participation. Implications for its generalisation to other child sport participants are discussed.

  2. The Mathematics Attitudes and Perceptions Survey: an instrument to assess expert-like views and dispositions among undergraduate mathematics students

    Science.gov (United States)

    Code, Warren; Merchant, Sandra; Maciejewski, Wes; Thomas, Matthew; Lo, Joseph

    2016-08-01

    One goal of an undergraduate education in mathematics is to help students develop a productive disposition towards mathematics. A way of conceiving of this is as helping mathematical novices transition to more expert-like perceptions of mathematics. This conceptualization creates a need for a way to characterize students' perceptions of mathematics in authentic educational settings. This article presents a survey, the Mathematics Attitudes and Perceptions Survey (MAPS), designed to address this need. We present the development of the MAPS instrument and its validation on a large (N = 3411) set of student data. Results from various MAPS implementations corroborate results from analogous instruments in other STEM disciplines. We present these results and highlight some in particular: MAPS scores correlate with course grades; students tend to move away from expert-like orientations over a semester or year of taking a mathematics course; and interactive-engagement type lectures have less of a negative impact, but no positive impact, on students' overall orientations than traditional lecturing. We include the MAPS instrument in this article and suggest ways in which it may deepen our understanding of undergraduate mathematics education.

  3. Flux Calibration of the BATC Survey and Its Application for Checking the Consistency of the Oke-Gunn Standards

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Four Oke-Gunn (OG) standards, HD 19445, HD 84937, BD+26 2606 and BD+17 4708 are used as standard stars for flux calibration in the BATC project. They are also widely used in the visual wavelength region in many other photometric projects. Over the years we have observed on 58 good photometric nights, and the data obtained are used for flux calibration. Normally two or three OG standards are observed in every photometric night. The data are used for getting the atmo-spheric extinction coefficients and instrumental magnitude zero point. We also use these data to make inter-comparisons among the magnitudes of these standard stars.As a result, we found the magnitudes of HD 19445, HD 84937 and BD+17 4708 to agree well with those estimated in previous work to within 0.03 magnitude. How-ever, BD+26 2606 shows a larger deviation especially at short wavebands. Possible reasons are analyzed and the revised magnitudes are obtained for these standards.It is shown that the quality of flux calibration of the BATC fields is significantly improved by applying the new magnitudes.

  4. Nearest Neighbor Averaging and its Effect on the Critical Level and Minimum Detectable Concentration for Scanning Radiological Survey Instruments that Perform Facility Release Surveys.

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, Sean Donovan; Beall, Patrick S; Miller, Mark L

    2014-08-01

    Through the SNL New Mexico Small Business Assistance (NMSBA) program, several Sandia engineers worked with the Environmental Restoration Group (ERG) Inc. to verify and validate a novel algorithm used to determine the scanning Critical Level (L c ) and Minimum Detectable Concentration (MDC) (or Minimum Detectable Areal Activity) for the 102F scanning system. Through the use of Monte Carlo statistical simulations the algorithm mathematically demonstrates accuracy in determining the L c and MDC when a nearest-neighbor averaging (NNA) technique was used. To empirically validate this approach, SNL prepared several spiked sources and ran a test with the ERG 102F instrument on a bare concrete floor known to have no radiological contamination other than background naturally occurring radioactive material (NORM). The tests conclude that the NNA technique increases the sensitivity (decreases the L c and MDC) for high-density data maps that are obtained by scanning radiological survey instruments.

  5. Use of electronic microprocessor-based instrumentation by the U.S. geological survey for hydrologic data collection

    Science.gov (United States)

    Shope, William G.; ,

    1991-01-01

    The U.S. Geological Survey is acquiring a new generation of field computers and communications software to support hydrologic data-collection at field locations. The new computer hardware and software mark the beginning of the Survey's transition from the use of electromechanical devices and paper tapes to electronic microprocessor-based instrumentation. Software is being developed for these microprocessors to facilitate the collection, conversion, and entry of data into the Survey's National Water Information System. The new automated data-collection process features several microprocessor-controlled sensors connected to a serial digital multidrop line operated by an electronic data recorder. Data are acquired from the sensors in response to instructions programmed into the data recorder by the user through small portable lap-top or hand-held computers. The portable computers, called personal field computers, also are used to extract data from the electronic recorders for transport by courier to the office computers. The Survey's alternative to manual or courier retrieval is the use of microprocessor-based remote telemetry stations. Plans have been developed to enhance the Survey's use of the Geostationary Operational Environmental Satellite telemetry by replacing the present network of direct-readout ground stations with less expensive units. Plans also provide for computer software that will support other forms of telemetry such as telephone or land-based radio.

  6. A systematic survey instrument translation process for multi-country, comparative health workforce studies

    NARCIS (Netherlands)

    Squires, A.; Aiken, L.H.; Heede, K. Van den; Sermeus, W.; Bruyneel, L.; Lindqvist, R.; Schoonhoven, L.; Stromseng, I.; Busse, R.; Brzostek, T.; Ensio, A.; Moreno-Casbas, M.; Rafferty, A.M.; Schubert, M.; Zikos, D.; Matthews, A.

    2013-01-01

    BACKGROUND: As health services research (HSR) expands across the globe, researchers will adopt health services and health worker evaluation instruments developed in one country for use in another. This paper explores the cross-cultural methodological challenges involved in translating HSR in the

  7. Measuring patient experiences with diabetes care in The Netherlands: the validity of a new survey instrument.

    NARCIS (Netherlands)

    Asbroek, G. ten; Delnoij, D.M.J.; Arah, O.A.; Sixma, H.; Koning, J.S. de; Rupp, I.; Poll, A.; Stam, P.J.A.; Schmidt, P.; Vriens, B.; Klazinga, N.S.

    2005-01-01

    Background: The introduction of market mechanisms in Dutch healthcare engages insurance companies in competition. Patient experience surveys are increasingly applied to generate performance information guiding consumers and insurers to choose and contract high performers, as well as holding them acc

  8. GASS: The Parkes Galactic All-Sky Survey. Update: improved correction for instrumental effects and new data release

    Science.gov (United States)

    Kalberla, P. M. W.; Haud, U.

    2015-06-01

    Context. The Galactic All-Sky Survey (GASS) is a survey of Galactic atomic hydrogen (H i) emission in the southern sky observed with the Parkes 64-m Radio Telescope. The first data release (GASS I) concerned survey goals and observing techniques, the second release (GASS II) focused on stray radiation and instrumental corrections. Aims: We seek to remove the remaining instrumental effects and present a third data release. Methods: We use the HEALPix tessellation concept to grid the data on the sphere. Individual telescope records are compared with averages on the nearest grid position for significant deviations. All averages are also decomposed into Gaussian components with the aim of segregating unacceptable solutions. Improved priors are used for an iterative baseline fitting and cleaning. In the last step we generate 3D FITS data cubes and examine them for remaining problems. Results: We have removed weak, but systematic baseline offsets with an improved baseline fitting algorithm. We have unraveled correlator failures that cause time dependent oscillations; errors cause stripes in the scanning direction. The remaining problems from radio frequency interference (RFI) are spotted. Classifying the severeness of instrumental errors for each individual telescope record (dump) allows us to exclude bad data from averages. We derive parameters that allow us to discard dumps without compromising the noise of the resulting data products too much. All steps are reiterated several times: in each case, we check the Gaussian parameters for remaining problems and inspect 3D FITS data cubes visually. We find that in total ~1.5% of the telescope dumps need to be discarded in addition to ~0.5% of the spectral channels that were excluded in GASS II. Conclusions: The new data release (GASS III) facilitates data products with improved quality. A new web interface, compatible with the previous version, is available for download of GASS III FITS cubes and spectra.

  9. Proposing a survey instrument for measuring operational, formal, information and strategic Internet skills

    NARCIS (Netherlands)

    Deursen, van A.J.A.M.; Dijk, van J.A.G.M.; Peters, O.

    2012-01-01

    Observational studies prove to be very suitable to provide a realistic view of people's Internet skills. However, their cost and time are a strong limitation for large-scale data gathering. A useful addition to the measurement of Internet skills would be the development of survey questions for measu

  10. The Calern Asteroid Polarimetric Survey using the Torino polarimeter: assessment of instrument performances and first scientific results

    Science.gov (United States)

    Devogèle, M.; Cellino, A.; Bagnulo, S.; Rivet, J. P.; Bendjoya, P.; Abe, L.; Pernechele, C.; Massone, G.; Vernet, D.; Tanga, P.; Dimur, C.

    2017-03-01

    A new polarimeter based on the wedged double Wollaston concept has been built at the Torino Observatory and installed on a 1-m telescope at the Calern observing station of the Observatoire de la Côte d'Azur, France. Its main purpose is to carry out a polarimetric survey of minor Solar system objects, which is called the Calern Asteroid Polarimetric Survey. In this paper, we describe the new Torino polarimeter and the results of preliminary scientific validation tests. A number of standard stars with known polarization states, as well as a number of asteroids for which the polarimetric properties are known, have been observed in order to assess the instrument's accuracy. The instrumental polarization has been found to be stable within a few 10-4 units. A total of 124 new polarimetric observation of 78 asteroids are presented. In the case of asteroids already observed in the past, the new data are in agreement with available phase-polarization curves with error bars smaller than most previously published data. We also present data for 21 asteroids that have never been observed before in polarimetry.

  11. Survey of Hospitals and Manufacturers of Biomedical Instrumentation Concerning Variables Related to the Development and Implementation of a Bio-Med Instrumentation Technologist Curriculum.

    Science.gov (United States)

    Schaumberg, Gary F.

    The Bio-Med Instrumentation Technologist Questionnaire was sent to 105 hospitals in the Southern California area that had electronic instrumentation for patient monitoring purposes. Sixty completed questionnaires were returned. Twenty manufacturers of bio-medical instrumentation were sent the questionnaires and seven responded. Some of the…

  12. Development of a respiratory protection survey instrument for occupational health nurses: an educational project.

    Science.gov (United States)

    Taormina, Deborah; Burgel, Barbara J

    2013-02-01

    The Institute of Medicine (2011) report Occupational Health Nurses and Respiratory Protection: Improving Education and Training outlined seven recommendations to improve the competency of occupational health nurses in respiratory protection. An advisory group was convened in December 2011, with stakeholder representation from the Centers for Disease Control and Prevention/National Institute for Occupational Safety and Health/National Personal Protective Technology Laboratory, American Association of Occupational Health Nurses, Inc., American Board for Occupational Health Nurses, Inc., Association of Occupational Health Professionals in Healthcare, American Nurses Association, and Institute of Medicine Standing Committee on Personal Protective Equipment for Workplace Safety and Health. The initial work of the advisory group included developing and administering a survey to assess current occupational health nurse roles and responsibilities relevant to respiratory protection. Development of the survey was led by a master's student and advisor who worked with the advisory group. The process of tool development and preliminary findings are presented in this article.

  13. A Survey of Commercially Available Chemical Agent Instrumentation for Use in the Field

    Energy Technology Data Exchange (ETDEWEB)

    Haas, J S; Alcaraz, A; Andresen, B D; Pruneda, C O

    2002-03-01

    Lawrence Livermore National Laboratory's (LLNL) Forensic Science Center (FSC) has extensive experience and capabilities in the analysis of chemical agents (CA) and related compounds as well as experience in identifying these materials in the field (i.e. samples such as those found in soils, liquids, gases). An open source survey was performed to determine viable, commercially available technology that can detect, in situ, CA and also meet field-use performance criteria as specified by the Program Management Consultant (PMC). The performance requirements of the technology include accuracy, reliability, integration onto robotics, and chemical detection sensitivities that meet required specifications. Not included in this survey are technologies and methodologies to detect CA decomposition products and related waste streams.

  14. NEW INSTRUMENTS FOR SURVEY: ON LINE SOFTWARES FOR 3D RECONTRUCTION FROM IMAGES

    OpenAIRE

    E. Fratus de Balestrini; Guerra, F.

    2012-01-01

    3d scanning technologies had a significant development and have been widely used in documentation of cultural, architectural and archeological heritages. Modern methods of three-dimensional acquiring and modeling allow to represent an object through a digital model that combines visual potentialities of images (normally used for documentation) to the accuracy of the survey, becoming at the same time support for the visualization that for metric evaluation of any artefact that have an historic...

  15. Measuring stigma among abortion providers: assessing the Abortion Provider Stigma Survey instrument.

    Science.gov (United States)

    Martin, Lisa A; Debbink, Michelle; Hassinger, Jane; Youatt, Emily; Eagen-Torkko, Meghan; Harris, Lisa H

    2014-01-01

    We explored the psychometric properties of 15 survey questions that assessed abortion providers' perceptions of stigma and its impact on providers' professional and personal lives referred to as the Abortion Provider Stigma Survey (APSS). We administered the survey to a sample of abortion providers recruited for the Providers' Share Workshop (N = 55). We then completed analyses using Stata SE/12.0. Exploratory factor analysis, which resulted in 13 retained items and identified three subscales: disclosure management, resistance and resilience, and discrimination. Stigma was salient in abortion provider's lives: they identified difficulties surrounding disclosure (66%) and felt unappreciated by society (89%). Simultaneously, workers felt they made a positive contribution to society (92%) and took pride in their work (98%). Paired t-test analyses of the pre- and post-Workshop APSS scores showed no changes in the total score. However, the Disclosure Management subscale scores were significantly lower (indicating decreased stigma) for two subgroups of participants: those over the age of 30 and those with children. This analysis is a promising first step in the development of a quantitative tool for capturing abortion providers' experiences of and responses to pervasive abortion stigma.

  16. An Evaluation of the Romanian Fruits and Vegetables Producers Access to Different Types of Common Agricultural Policy Instruments. Is there Any Real Consistency with the Policy Objectives?

    Directory of Open Access Journals (Sweden)

    Nicu MARCU

    2015-04-01

    Full Text Available Fruits and vegetables sectors are considered to be strategic in the European Union due to their contribution to a better human health. Among others positive effects, their intake increase reduce mortality and obesity, assuring in the same time harmonised development for young children. The present study thus focused to reveal the consistency of the measure implemented in the Common Agricultural Policy to support fruits and vegetables production in Romania in liaison with the policy objectives. The country is one of the main ten important European producers of horticultural products in terms of production volumes and acreage. Results showed that over the last seven years (2007-2014, the sectorial production drawbacks have not been ameliorated very much. Both sectors are dominated by small-size farms that can produce only seasonally and mainly for short-market chains. In the same time, the greenhouses area shrink to levels that made the country extremely dependent to imports especially for tomatoes. The analysis of the pillar one payments schemes revealed that the fruits and vegetables producers could have access to only one payment that was half from European averages. Moreover, almost half of the producers had low sizes that left them outside the eligible criteria. The measures designed for the second pillar also penalized producers through the selection criteria. These results showed that for Romania there was not a real consistency between the actual policy measures and the objectives assumed by policy makers. The future measures (2014-2020 seem to correct these negative findings being better tailored to the situation of the local fruits and vegetables producers.

  17. Synthesizing Exoplanet Demographics: A Single Population of Long-period Planetary Companions to M Dwarfs Consistent with Microlensing, Radial Velocity, and Direct Imaging Surveys

    Science.gov (United States)

    Clanton, Christian; Gaudi, B. Scott

    2016-03-01

    We present the first study to synthesize results from five different exoplanet surveys using three independent detection methods: microlensing, radial velocity, and direct imaging. The constraints derived herein represent the most comprehensive picture of the demographics of large-separation (≳2 AU) planets orbiting the most common stars in our Galaxy that has been constructed to date. We assume a simple, joint power-law planet distribution function of the form {d}2{N}{{pl}}/(d{log} {m}p d{log} a)={ A }{({m}p/{M}{{Sat}})}α {(a/2.5{{AU}})}β with an outer cutoff radius of the separation distribution function of aout. Generating populations of planets from these models and mapping them into the relevant observables for each survey, we use actual or estimated detection sensitivities to determine the expected observations for each survey. Comparing with the reported results, we derive constraints on the parameters \\{α ,β ,{ A },{a}{{out}}\\} that describe a single population of planets that is simultaneously consistent with the results of microlensing, radial velocity, and direct imaging surveys. We find median and 68% confindence intervals of α =-{0.86}-0.19+0.21 (-{0.85}-0.19+0.21), β ={1.1}-1.4+1.9 ({1.1}-1.3+1.9), { A }={0.21}-0.15+0.20 {{dex}}-2 ({0.21}-0.15+0.20 {{dex}}-2), and {a}{{out}}={10}-4.7+26 AU ({12}-6.2+50 AU) assuming “hot-start” (“cold-start”) planet evolutionary models. These values are consistent with all current knowledge of planets on orbits beyond ∼2 AU around single M dwarfs.

  18. Development and testing of the Survey of Family Environment (SFE): a novel instrument to measure family functioning and needs for family support.

    Science.gov (United States)

    Hohashi, Naohiro; Honda, Junko

    2012-01-01

    Hohashi's Concentric Sphere Family Environment Model (CSFEM; Hohashi & Honda, 2011) is a newly proposed family nursing theory for holistically understanding the family environment that acts on family well-being. The purpose of this article is to develop and psychometrically test the Japanese version of the Survey of Family Environment (SFE-J), grounded in the CSFEM, for measuring family's perceived family functioning and family's perceived needs for family support. The SFE-J is a 30-item self-administered instrument that assesses five domains (suprasystem, macrosystem, microsystem, family internal environment system, and chronosystem) and has been subjected to rigorous reliability and validity investigations among paired partners in child-rearing families (N of family = 1,990). Internal consistency reliability was high as measured by Cronbach's alpha coefficients. Temporal stability over a 2-week interval was supported by high (substantial or perfect) and significant intraclass correlation coefficients. The total score for the SFE-J was significantly correlated with the Japanese version of the Feetham Family Functioning Survey (FFFS-J), indicating an acceptable concurrent validity. Construct validity was supported by a confirmatory factor analysis that evaluated the five-factor structure to measure the concept of CSFEM. Results also demonstrate that the SFE-J family functioning scores show no significant differences between paired partners. The SFE-J is a reliable and valid instrument to assess not only intrafamily functioning but also interfamily functioning and, by identifying items/domains with high requirements for family support, serves to facilitate the providing of appropriate support to families.

  19. [First stage of the cross-cultural adaptation of the instrument The Vulnerable Elders Survey (VES-13) to Portuguese].

    Science.gov (United States)

    Luz, Laércio Lima; Santiago, Lívia Maria; Silva, João Francisco Santos da; Mattos, Inês Echenique

    2013-03-01

    The aim of this study was to describe the initial stages of the cross-cultural adaptation of the instrument The Vulnerable Elders Survey (VES-13) for use in the context of cancer care in Brazil. Two translations into Portuguese and two back-translations into English were carried out independently, and a formal assessment of the general and referential meanings was performed in order to obtain a synthesis version. Understanding of the synthesis version was evaluated in a pretest applied to 33 patients in an oncologic hospital of the Brazilian Unified National Health System (SUS). The version was easily applied in the intended context and was well-accepted by elders. The Portuguese version of the VES-13 proved to be well understood and adequate for testing its psychometric qualities. The latter step is currently in the final phase.

  20. A survey on the high reliability software verification and validation technology for instrumentation and control in NPP.

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Kee Choon; Lee, Chang Soo; Dong, In Sook [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-01-01

    This document presents the technical status of the software verification and validation (V and V) efforts to support developing and licensing digital instrumentation and control (I and C) systems in nuclear power plants. We have reviewed codes and standards to be concensus criteria among vendor, licensee and licenser. Then we have described the software licensing procedures under 10 CFR 50 and 10 CFR 52 of the United States cope with the licensing barrier. At last, we have surveyed the technical issues related to developing and licensing the high integrity software for digital I and C systems. These technical issues let us know the development direction of our own software V and V methodology. (Author) 13 refs., 2 figs.,.

  1. The Application of Factorial Surveys in General Population Samples: The Effects of Respondent Age and Education on Response Times and Response Consistency

    Directory of Open Access Journals (Sweden)

    Carsten Sauer

    2011-12-01

    Full Text Available Over the last decade, there has been a marked increase in the number of studies on attitude and decision research which use the factorial survey (FS design. The FS integrates experimental set-ups into a survey: respondents react to hypothetical descriptions (vignettes while the values of each attribute (dimension of these descriptions systematically vary in order to estimate their impact on respondent judgments. As the vignettes are based on a number of dimensions and as respondents evaluate several vignettes, FSs are demanding in terms of individual cognitive and information-processing abilities. So far, there is little empirical knowledge of whether and to what extent this complexity is feasible in general population samples with heterogeneous respondents. Using data from a study on the fairness of earnings (with a mixed mode sample consisting a computer assisted personal interview [CAPI], computer assisted self interview [CASI], and paper and pencil [PAPI] mode, the complexity of FSs is analyzed in terms of: 1 design dimensions, such as the number of vignette dimensions (five, eight, or 12 and the number of vignettes for single respondents (10, 20, or 30, which were varied in a 3x3 experimental design; and 2 respondent characteristics that are associated with cognitive abilities (age and education. Two different indicators for cognitive load as well as learning and fatigue effects are analyzed: 1 latency time and 2 response consistency. The results show that raw reaction times but not latency times are longer for older respondents, suggesting that the cognitive effort needed for the evaluation of vignettes is not particularly high. Consistency measures reveal that respondents with a lower educational level show greater inconsistency in their evaluations when the number of vignettes is high. The number of dimensions has an effect on consistency only when respondents have to rate a large number of vignettes. In short, the results demonstrate

  2. Synthesizing Exoplanet Demographics: A Single Population of Long-Period Planetary Companions to M Dwarfs Consistent with Microlensing, Radial Velocity, and Direct Imaging Surveys

    CERN Document Server

    Clanton, Christian

    2015-01-01

    We present the first study to synthesize results from five different exoplanet surveys using three independent detection methods: microlensing, radial velocity, and direct imaging. The constraints derived herein represent the most comprehensive picture of the demographics of large-separation (>~ 2 AU) planets orbiting the most common stars in our Galaxy that has been constructed to date. We assume a simple, joint power-law planet distribution function of the form d^2N_{pl}/[dlog(m_p)dlog(a)] = A(m_p/M_{Sat})^{alpha}(a/2.5 AU)^{beta} with an outer cutoff radius of the separation distribution function of a_{out}. Generating populations of planets from these models and mapping them into the relevant observables for each survey, we use actual or estimated detection sensitivities to determine the expected observations for each survey. Comparing with the reported results, we derive constraints on the parameters {alpha, beta, A, a_{out}} that describe a single population of planets that is simultaneously consistent ...

  3. Modified ERT instrumentation for geo-scientific surveys in the historical centre of Mesagne (Brindisi, Southern Italy)

    Science.gov (United States)

    Leucci, Giovanni; De Giorgi, Lara; Terenzio Gizzi, Fabrizio; Persico, Raffaele

    2016-04-01

    The town of Mesagne is one of the sites at greatest geological risk in the north Salento peninsula. In the last few decades, the historical centre of Mesagne has been affected by a series of subsidence events, which have, in some cases, resulted in the partial collapse of buildings and road surfaces. The last event was in the January 2014. It caused subsidence phenomenon in a wide area and many families have been forced from their homes. These events have had both social repercussions, causing alarm and emergency situations, and economic repercussions in terms of the expense of restoration. In order to determine the causes of the ground subsidence events, integrated geophysical surveys were undertaken in the historical centre of Mesagne. In addition, the analysis of several wells allowed the 3D model reconstruction related both to the geology and to the groundwater depth in the surveyed areas. With the purpose of estimating the dimensions of the phenomenon and its possible relationship with both specific environmental conditions (for instance groundwater depth variation) and anthropic conditions (for instance the losses in water supply and sanitation) some geophysical measurements were repeated in the time. For this purpose a modified ERT instrumentation together GPR were used. The study led to the production of a detailed description of the subsidence causes that allows a quick action to restore security conditions in the area.

  4. Benefits of extensive recruitment effort persist during follow-ups and are consistent across age group and survey method. The TRAILS study

    Directory of Open Access Journals (Sweden)

    Nederhof Esther

    2012-07-01

    . Conclusions First, extensive recruitment effort at the first assessment wave of a prospective population based cohort study has long lasting positive effects. Second, characteristics of hard-to-recruit responders are largely consistent across age groups and survey methods.

  5. Developing a survey instrument to assess the readiness of primary care data, genetic and disease registries to conduct linked research: TRANSFoRm International Research Readiness (TIRRE survey instrument

    Directory of Open Access Journals (Sweden)

    Emily Leppenwell

    2013-05-01

    Full Text Available Background Clinical data are collected for routine care in family practice; there are also a growing number of genetic and cancer registry data repositories. The Translational Research and Patient Safety in Europe (TRANSFoRm project seeks to facilitate research using linked data from more than one source. We performed a requirements analysis which identified a wide range of data and business process requirements that need to be met before linking primary care and either genetic or disease registry data.Objectives To develop a survey to assess the readiness of data repositories to participate in linked research – the Transform International Research Readiness (TIRRE survey.Method We develop the questionnaire based on our requirement analysis; with questions at micro-, meso- and macro levels of granularity, study-specific questions about diabetes and gastro-oesophageal reflux disease (GORD, and research track record. The scope of the data required was extensive. We piloted this instrument, conducting ten preliminary telephone interviews to evaluate the response to the questionnaire.Results Using feedback gained from these interviews we revised the questionnaire; clarifying questions that were difficult to answer and utilising skip logic to create different series of questions for the various types of data repository. We simplified the questionnaire replacing free-text responses with yes/no or picking list options, wherever possible. We placed the final questionnaire online and encouraged its use (www.clininf.eu/jointirre/info.html.Conclusion Limited field testing suggests that TIRRE is capable of collecting comprehensive and relevant data about the suitability and readiness of data repositories to participate in linked data research.

  6. Consistency of the growth rate in different environments with the 6dF Galaxy Survey: measurement of the void-galaxy & galaxy-galaxy correlation functions

    CERN Document Server

    Achitouv, Ixandra

    2016-01-01

    We present a new test of gravitational physics by comparing the growth rate of cosmic structure measured around voids with that measured around galaxies in the same large-scale structure dataset, the low-redshift 6-degree Field Galaxy Survey. By fitting a self-consistent Redshift Space Distortion model to the 2D galaxy-galaxy and void-galaxy correlation functions, we recover growth rate values f\\sigma_8 = 0.36 \\pm 0.06 and 0.39 \\pm 0.11, respectively. The environmental-dependence of cosmological statistics can potentially discriminate between modified-gravity scenarios which modulate the growth rate as a function of scale or environment and test the underlying assumptions of homogeneity and isotropy.

  7. Circumpolar Arctic vegetation: a hierarchic review and roadmap toward an internationally consistent approach to survey, archive and classify tundra plot data

    Science.gov (United States)

    Walker, D. A.; Daniëls, F. J. A.; Alsos, I.; Bhatt, U. S.; Breen, A. L.; Buchhorn, M.; Bültmann, H.; Druckenmiller, L. A.; Edwards, M. E.; Ehrich, D.; Epstein, H. E.; Gould, W. A.; Ims, R. A.; Meltofte, H.; Raynolds, M. K.; Sibik, J.; Talbot, S. S.; Webber, P. J.

    2016-05-01

    Satellite-derived remote-sensing products are providing a modern circumpolar perspective of Arctic vegetation and its changes, but this new view is dependent on a long heritage of ground-based observations in the Arctic. Several products of the Conservation of Arctic Flora and Fauna are key to our current understanding. We review aspects of the PanArctic Flora, the Circumpolar Arctic Vegetation Map, the Arctic Biodiversity Assessment, and the Arctic Vegetation Archive (AVA) as they relate to efforts to describe and map the vegetation, plant biomass, and biodiversity of the Arctic at circumpolar, regional, landscape and plot scales. Cornerstones for all these tools are ground-based plant-species and plant-community surveys. The AVA is in progress and will store plot-based vegetation observations in a public-accessible database for vegetation classification, modeling, diversity studies, and other applications. We present the current status of the Alaska Arctic Vegetation Archive (AVA-AK), as a regional example for the panarctic archive, and with a roadmap for a coordinated international approach to survey, archive and classify Arctic vegetation. We note the need for more consistent standards of plot-based observations, and make several recommendations to improve the linkage between plot-based observations biodiversity studies and satellite-based observations of Arctic vegetation.

  8. A Frailty Instrument for primary care: findings from the Survey of Health, Ageing and Retirement in Europe (SHARE

    Directory of Open Access Journals (Sweden)

    Romero-Ortuno Roman

    2010-08-01

    Full Text Available Abstract Background A frailty paradigm would be useful in primary care to identify older people at risk, but appropriate metrics at that level are lacking. We created and validated a simple instrument for frailty screening in Europeans aged ≥50. Our study is based on the first wave of the Survey of Health, Ageing and Retirement in Europe (SHARE, http://www.share-project.org, a large population-based survey conducted in 2004-2005 in twelve European countries. Methods Subjects: SHARE Wave 1 respondents (17,304 females and 13,811 males. Measures: five SHARE variables approximating Fried's frailty definition. Analyses (for each gender: 1 estimation of a discreet factor (DFactor model based on the frailty variables using LatentGOLD®. A single DFactor with three ordered levels or latent classes (i.e. non-frail, pre-frail and frail was modelled; 2 the latent classes were characterised against a biopsychosocial range of Wave 1 variables; 3 the prospective mortality risk (unadjusted and age-adjusted for each frailty class was established on those subjects with known mortality status at Wave 2 (2007-2008 (11,384 females and 9,163 males; 4 two web-based calculators were created for easy retrieval of a subject's frailty class given any five measurements. Results Females: the DFactor model included 15,578 cases (standard R2 = 0.61. All five frailty indicators discriminated well (p N = 10,420; 66.9%, pre-frail (N = 4,025; 25.8%, and frail (N = 1,133; 7.3%. Relative to the non-frail class, the age-adjusted Odds Ratio (with 95% Confidence Interval for mortality at Wave 2 was 2.1 (1.4 - 3.0 in the pre-frail and 4.8 (3.1 - 7.4 in the frail. Males: 12,783 cases (standard R2 = 0.61, all frailty indicators had p N = 10,517; 82.3%, pre-frail (N = 1,871; 14.6%, and frail (N = 395; 3.1%; age-adjusted OR (95% CI for mortality: 3.0 (2.3 - 4.0 in the pre-frail, 6.9 (4.7 - 10.2 in the frail. Conclusions The SHARE Frailty Instrument has sufficient construct and

  9. Interface Consistency

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1998-01-01

    This paper proposes that Interface Consistency is an important issue for the development of modular designs. Byproviding a precise specification of component interfaces it becomes possible to check that separately developedcomponents use a common interface in a coherent matter thus avoiding a very...... significant source of design errors. Awide range of interface specifications are possible, the simplest form is a syntactical check of parameter types.However, today it is possible to do more sophisticated forms involving semantic checks....

  10. Cultural adaptation and internal consistency analysis of the MISSCARE Survey for use in Brazil Adaptación cultural y análisis de la consistencia interna del instrumento MISSCARE para uso en Brasil Adaptação cultural e análise da consistência interna do instrumento MISSCARE para uso no Brasil

    Directory of Open Access Journals (Sweden)

    Lillian Dias Castilho Siqueira

    2013-04-01

    Full Text Available OBJECTIVE: The aims of this methodological research were to culturally adapt the MISSCARE Survey instrument to Brazil and analyze the internal consistency of the adapted version. METHOD: The instrument consists of 41 items, presented in two parts. Part A contains 24 items listing elements of missed nursing care. Part B is comprised of 17 items, related to the reasons for not delivering care. The research received ethics committee approval and was undertaken in two phases. The first was the cultural adaptation process, in which a committee of five experts verified the face and content validity, in compliance with the steps recommended in the literature. The second was aimed at analyzing the internal consistency of the instrument, involving 60 nursing team professionals at a public teaching hospital. RESULTS: According to the experts, the instrument demonstrated face and content validity. Cronbach's alpha coefficients for parts A and B surpassed 0.70 and were considered appropriate. CONCLUSION: The adapted version of the MISSCARE Survey demonstrated satisfactory face validity and internal consistency for the study sample. OBJETIVOS: Los objetivos de este estudio metodológico fueron efectuar la adaptación cultural del instrumento MISSCARE para Brasil y analizar la consistencia interna de la versión adaptada. MÉTODO: El instrumento contiene 41 ítem, presentados en dos partes. La parte A contiene 24 ítem, referentes a los elementos de los cuidados de enfermería omitidos, y la parte B 17 ítem, relacionados a los motivos para no prestar los cuidados. La investigación, con aprobación del comité de ética, fue efectuada en dos fases. La primera fue el proceso de adaptación cultural, que verificó la validez aparente y de contenido, llevado a cabo por un comité de cinco jueces según los pasos recomendados por la literatura. El objetivo de la segunda fue analizar la consistencia interna del instrumento con 60 profesionales del equipo de

  11. OBSERVATIONS OF BINARY STARS WITH THE DIFFERENTIAL SPECKLE SURVEY INSTRUMENT. V. TOWARD AN EMPIRICAL METAL-POOR MASS–LUMINOSITY RELATION

    Energy Technology Data Exchange (ETDEWEB)

    Horch, Elliott P. [Department of Physics, Southern Connecticut State University, 501 Crescent Street, New Haven, CT 06515 (United States); Van Altena, William F.; Demarque, Pierre [Department of Astronomy, Yale University P.O. Box 208101, New Haven, CT 06520-8101 (United States); Howell, Steve B. [NASA Ames Research Center, Moffett Field, CA 94035 (United States); Everett, Mark E. [National Optical Astronomy Observatory, 950 North Cherry Avenue, Tucson, AZ 85719 (United States); Ciardi, David R. [NASA Exoplanet Science Institute, California Institute of Technology, 770 South Wilson Avenue, Mail Code 100-22, Pasadena, CA 91125 (United States); Teske, Johanna K. [Department of Terrestrial Magnetism and Carnegie Observatories, Carnegie Institute of Washington, 5241 Broad Branch Road, NW, Washington, DC 20015 (United States); Henry, Todd J.; Winters, Jennifer G., E-mail: horche2@southernct.edu, E-mail: william.vanaltena@yale.edu, E-mail: pierre.demarque@yale.edu, E-mail: steve.b.howell@nasa.gov, E-mail: everett@noao.edu, E-mail: ciardi@ipac.caltech.edu, E-mail: jteske@carnegiescience.edu, E-mail: thenry@astro.gsu.edu, E-mail: winters@astro.gsu.edu [Department of Physics and Astronomy, Georgia State University, Atlanta, GA 30302 (United States)

    2015-05-15

    In an effort to better understand the details of the stellar structure and evolution of metal-poor stars, the Gemini North telescope was used on two occasions to take speckle imaging data of a sample of known spectroscopic binary stars and other nearby stars in order to search for and resolve close companions. The observations were obtained using the Differential Speckle Survey Instrument, which takes data in two filters simultaneously. The results presented here are of 90 observations of 23 systems in which one or more companions was detected, and six stars where no companion was detected to the limit of the camera capabilities at Gemini. In the case of the binary and multiple stars, these results are then further analyzed to make first orbit determinations in five cases, and orbit refinements in four other cases. The mass information is derived, and since the systems span a range in metallicity, a study is presented that compares our results with the expected trend in total mass as derived from the most recent Yale isochrones as a function of metal abundance. These data suggest that metal-poor main-sequence stars are less massive at a given color than their solar-metallicity analogues in a manner consistent with that predicted from the theory.

  12. Observations of Binary Stars with the Differential Speckle Survey Instrument. V. Toward an Empirical Metal-Poor Mass-Luminosity Relation

    Science.gov (United States)

    Horch, Elliott P.; van Altena, William F.; Demarque, Pierre; Howell, Steve B.; Everett, Mark E.; Ciardi, David R.; Teske, Johanna K.; Henry, Todd J.; Winters, Jennifer G.

    2015-05-01

    In an effort to better understand the details of the stellar structure and evolution of metal-poor stars, the Gemini North telescope was used on two occasions to take speckle imaging data of a sample of known spectroscopic binary stars and other nearby stars in order to search for and resolve close companions. The observations were obtained using the Differential Speckle Survey Instrument, which takes data in two filters simultaneously. The results presented here are of 90 observations of 23 systems in which one or more companions was detected, and six stars where no companion was detected to the limit of the camera capabilities at Gemini. In the case of the binary and multiple stars, these results are then further analyzed to make first orbit determinations in five cases, and orbit refinements in four other cases. The mass information is derived, and since the systems span a range in metallicity, a study is presented that compares our results with the expected trend in total mass as derived from the most recent Yale isochrones as a function of metal abundance. These data suggest that metal-poor main-sequence stars are less massive at a given color than their solar-metallicity analogues in a manner consistent with that predicted from the theory.

  13. Solid consistency

    Science.gov (United States)

    Bordin, Lorenzo; Creminelli, Paolo; Mirbabayi, Mehrdad; Noreña, Jorge

    2017-03-01

    We argue that isotropic scalar fluctuations in solid inflation are adiabatic in the super-horizon limit. During the solid phase this adiabatic mode has peculiar features: constant energy-density slices and comoving slices do not coincide, and their curvatures, parameterized respectively by ζ and Script R, both evolve in time. The existence of this adiabatic mode implies that Maldacena's squeezed limit consistency relation holds after angular average over the long mode. The correlation functions of a long-wavelength spherical scalar mode with several short scalar or tensor modes is fixed by the scaling behavior of the correlators of short modes, independently of the solid inflation action or dynamics of reheating.

  14. Validation of a survey instrument to assess home environments for physical activity and healthy eating in overweight children

    Directory of Open Access Journals (Sweden)

    Crane Lori A

    2008-01-01

    Full Text Available Abstract Background Few measures exist to measure the overall home environment for its ability to support physical activity (PA and healthy eating in overweight children. The purpose of this study was to develop and test the reliability and validity of such a measure. Methods The Home Environment Survey (HES was developed to reflect availability, accessibility, parental role modelling, and parental policies related to PA resources, fruits and vegetables (F&V, and sugar sweetened drinks and snacks (SS. Parents of overweight children (n = 219 completed the HES and concurrent behavioural assessments. Children completed the Block Kids survey and wore an accelerometer for one week. A subset of parents (n = 156 completed the HES a second time to determine test-retest reliability. Finally, 41 parent dyads living in the same home (n = 41 completed the survey to determine inter-rater reliability. Initial psychometric analyses were completed to trim items from the measure based on lack of variability in responses, moderate or higher item to scale correlation, or contribution to strong internal consistency. Inter-rater and test-retest reliability were completed using intraclass correlation coefficients. Validity was assessed using Pearson correlations between the HES scores and child and parent nutrition and PA. Results Eight items were removed and acceptable internal consistency was documented for all scales (α = .66–84 with the exception of the F&V accessibility. The F&V accessibility was reduced to a single item because the other two items did not meet reliability standards. Test-retest reliability was high (r > .75 for all scales. Inter-rater reliability varied across scales (r = .22–.89. PA accessibility, parent role modelling, and parental policies were all related significantly to child (r = .14–.21 and parent (r = .15–.31 PA. Similarly, availability of F&V and SS, parental role modelling, and parental policies were related to child (r

  15. THE OPTICALLY UNBIASED GRB HOST (TOUGH) SURVEY. VI. RADIO OBSERVATIONS AT z {approx}< 1 AND CONSISTENCY WITH TYPICAL STAR-FORMING GALAXIES

    Energy Technology Data Exchange (ETDEWEB)

    Michalowski, M. J.; Dunlop, J. S. [SUPA (Scottish Universities Physics Alliance), Institute for Astronomy, University of Edinburgh, Royal Observatory, Edinburgh EH9 3HJ (United Kingdom); Kamble, A.; Kaplan, D. L. [Physics Department, University of Wisconsin-Milwaukee, Milwaukee, WI 53211 (United States); Hjorth, J.; Malesani, D.; Fynbo, J. P. U.; Kruehler, T. [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, Juliane Maries Vej 30, DK-2100 Copenhagen O (Denmark); Reinfrank, R. F. [CSIRO Astronomy and Space Science, P.O. Box 76, Epping, NSW 1710 (Australia); Bonavera, L. [Instituto de Fisica de Cantabria, CSIC-Universidad de Cantabria, Avda. de los Castros s/n, E-39005 Santander (Spain); Castro Ceron, J. M. [Department of Radio Astronomy, Madrid Deep Space Communications Complex (INTA-NASA/INSA), Ctra. M-531, km. 7, E-28.294 Robledo de Chavela (Madrid) (Spain); Ibar, E. [UK Astronomy Technology Centre, Royal Observatory, Blackford Hill, Edinburgh EH9 3HJ (United Kingdom); Garrett, M. A. [Netherlands Institute for Radio Astronomy (ASTRON), Postbus 2, 7990 AA Dwingeloo (Netherlands); Jakobsson, P. [Centre for Astrophysics and Cosmology, Science Institute, University of Iceland, Dunhagi 5, 107 Reykjavik (Iceland); Levan, A. J. [Department of Physics, University of Warwick, Coventry CV4 7AL (United Kingdom); Massardi, M. [INAF-Istituto di Radioastronomia, via Gobetti 101, I-40129 Bologna (Italy); Pal, S. [ICRAR, University of Western Australia, 35 Stirling Highway, Crawley, WA (Australia); Sollerman, J. [Oskar Klein Centre, Department of Astronomy, AlbaNova, Stockholm University, SE-10691 Stockholm (Sweden); Tanvir, N. R. [Department of Physics and Astronomy, University of Leicester, University Road, Leicester LE1 7RH (United Kingdom); Van der Horst, A. J., E-mail: mm@roe.ac.uk [Astronomical Institute ' Anton Pannekoek' , University of Amsterdam, Science Park 904, 1098XH Amsterdam (Netherlands); and others

    2012-08-20

    The objective of this paper is to determine the level of obscured star formation activity and dust attenuation in a sample of gamma-ray burst (GRB) hosts, and to test the hypothesis that GRB hosts have properties consistent with those of the general star-forming galaxy populations. We present a radio continuum survey of all z < 1 GRB hosts in The Optically Unbiased GRB Host (TOUGH) sample supplemented with radio data for all (mostly pre-Swift) GRB-SN hosts discovered before 2006 October. We present new radio data for 22 objects and have obtained a detection for three of them (GRB 980425, 021211, 031203; none in the TOUGH sample), increasing the number of radio-detected GRB hosts from two to five. The star formation rate (SFR) for the GRB 021211 host of {approx}825 M{sub Sun} yr{sup -1}, the highest ever reported for a GRB host, places it in the category of ultraluminous infrared galaxies. We found that at least {approx}63% of GRB hosts have SFR < 100 M{sub Sun} yr{sup -1} and at most {approx}8% can have SFR > 500 M{sub Sun} yr{sup -1}. For the undetected hosts the mean radio flux (<35 {mu}Jy 3{sigma}) corresponds to an average SFR < 15 M{sub Sun} yr{sup -1}. Moreover, {approx}> 88% of the z {approx}< 1 GRB hosts have ultraviolet dust attenuation A{sub UV} < 6.7 mag (visual attenuation A{sub V} < 3 mag). Hence, we did not find evidence for large dust obscuration in a majority of GRB hosts. Finally, we found that the distributions of SFRs and A{sub UV} of GRB hosts are consistent with those of Lyman break galaxies, H{alpha} emitters at similar redshifts, and of galaxies from cosmological simulations. The similarity of the GRB population with other star-forming galaxies is consistent with the hypothesis that GRBs, a least at z {approx}< 1, trace a large fraction of all star formation, and are therefore less biased indicators than once thought.

  16. Development and pilot testing of an Internet-based survey instrument to measure the alcohol brand preferences of U.S. youth.

    Science.gov (United States)

    Siegel, Michael; DiLoreto, Joanna; Johnson, Andrea; Fortunato, Erin K; DeJong, William

    2011-04-01

    Although we know a great deal about the percentage of youth who drink alcohol, we know very little about the specific brands they choose to drink. This information gap needs to be addressed if public health officials are to develop more effective interventions. Unfortunately, there are no national youth surveys that collect data on alcohol brand consumption. In this paper, we describe the development and pilot testing of what we believe to be the first comprehensive, Internet-based youth survey of brand-specific alcohol use. We used online advertising in 3 U.S. cities to recruit a convenience sample of 241 respondents, ages 16 to 18 years. We used Craigslist, a network of online communities that features local classified advertisements, to recruit the sample. We used SurveyGizmo, an online software program for designing Internet surveys, collecting data, and performing basic analysis, to survey these respondents about their brand-specific alcohol consumption patterns. The survey instrument assessed each respondent's 30-day drinking history, including the frequency of consumption for each alcohol brand. Using Internet survey technology, we were able to collect information on 366 brands and still have respondents complete the instrument quickly and easily. The total number of brands consumed in the past 30 days ranged from 1 to 18, with a median of 4 brands. The top 5 brands consumed were beer brands, as were eleven of the top 15 brands. The remaining 4 brands in the top 15 included 3 brands of flavored alcoholic beverages and 1 brand of mixed drink. Among the top 15 alcohol brands consumed during heavy drinking episodes were 8 brands of beer, 4 brands of flavored alcoholic beverages, 2 brands of wine, and 1 brand of mixed drink. This pilot study helps establish the feasibility of including brand-specific questions on federal or other national youth alcohol surveys. Copyright © 2011 by the Research Society on Alcoholism.

  17. Results of a healthcare worker (HCW) survey on environmental awareness as an instrument for the preparation of an environmental report for the University Medicine Greifswald.

    Science.gov (United States)

    Heiden, Jens-Uwe; Kramer, Axel; Bornewasser, Manfred; Lemanski, Sandra; Below, Harald

    2011-01-01

    Environmental reporting is increasingly important for medical facilities. Currently, hospitals can determine the content of an environmental report as they see fit. To examine the utility and scope of an employee survey as an instrument for the preparation of an environmental report at the University Hospital Greifswald. For this purpose a questionnaire was developed with a focus on environmental behaviour and the significance attached to the protection of the environment. The employees of the University Medicine Greifswald attach an unexpectedly high significance to the protection of the environment. Based on this finding, this potential should be used to promote the optimal implementation of ecological-economic behaviour within the University Medicine. An employee survey is a useful instrument in the preparation of an environmental report.

  18. Validity and reliability of the Patient-Reported Arthralgia Inventory: validation of a newly-developed survey instrument to measure arthralgia

    Directory of Open Access Journals (Sweden)

    Castel LD

    2015-07-01

    Full Text Available Liana D Castel,1 Kenneth A Wallston,2 Benjamin R Saville,3 JoAnn R Alvarez,3 Bradley D Shields,4 Irene D Feurer,3 David Cella5 1Meharry-Vanderbilt Alliance, Nashville, TN, USA; 2Psychology in Nursing, Vanderbilt University School of Nursing, Nashville, TN, USA; 3Surgery and Biostatistics, Vanderbilt University School of Medicine, Nashville, TN, USA; 4Medical Sciences, University of Arkansas School of Medicine, Little Rock, AR, USA; 5Medical Social Sciences, Northwestern University Feinberg School of Medicine, Chicago, IL, USA Background: There is a need for a survey instrument to measure arthralgia (joint pain that has been psychometrically validated in the context of existing reference instruments. We developed the 16-item Patient-Reported Arthralgia Inventory (PRAI to measure arthralgia severity in 16 joints, in the context of a longitudinal cohort study to assess aromatase inhibitor-associated arthralgia in breast cancer survivors and arthralgia in postmenopausal women without breast cancer. We sought to evaluate the reliability and validity of the PRAI instrument in these populations, as well as to examine the relationship of patient-reported morning stiffness and arthralgia. Methods: We administered the PRAI on paper in 294 women (94 initiating aromatase inhibitor therapy and 200 postmenopausal women without breast cancer at weeks 0, 2, 4, 6, 8, 12, 16, and 52, as well as once in 36 women who had taken but were no longer taking aromatase inhibitor therapy. Results: Cronbach's alpha was 0.9 for internal consistency of the PRAI. Intraclass correlation coefficients of test-retest reliability were in the range of 0.87–0.96 over repeated PRAI administrations; arthralgia severity was higher in the non-cancer group at baseline than at subsequent assessments. Women with joint comorbidities tended to have higher PRAI scores than those without (estimated difference in mean scores: -0.3, 95% confidence interval [CI] -0.5, -0.2; P<0.001. The PRAI was

  19. Evaluation of the two non-consecutive 24-h recall instrument for pan-European food consumption surveys

    NARCIS (Netherlands)

    Crispim, S.P.

    2011-01-01

    Background: The comparability of food consumption data originating from national nutritional surveys in Europe is currently hampered because of different methodologies used. Therefore, experts in the European Food Consumption Survey Method (EFCOSUM) consortium proposed to use two non-consecutive

  20. Development of the emergency physician job satisfaction measurement instrument.

    Science.gov (United States)

    Lloyd, S; Streiner, D; Hahn, E; Shannon, S

    1994-01-01

    The objective of this study was to develop a valid and reliable instrument to measure the job satisfaction of physicians practicing emergency medicine. A prospective survey involving four separate stages (an item evaluation and reduction stage, a factor analysis stage, a construct validity stage, and a reliability stage) was distributed in Canada to full-time emergency physicians. Three separate survey instruments were administered (an initial draft instrument with 228 items, a pilot instrument with 142 items, and the final instrument with 79 items). Construct validity of the final instrument was tested by evaluating the correlation between physician scores on the instrument, and scores on two instruments measuring the same construct, and three measuring different but related constructs. A draft instrument with 228 items and six hypothetical domains was tested on 61 physicians. Evaluation for frequency endorsement, redundancy, and homogeneity reduced the item pool to 157. The remaining 157 items were used as a pilot instrument and tested on 223 physicians. Factor analysis eliminated 66 items from the pilot instrument, creating a final instrument with 79 items, 11 factors, and six domains. Cronbach's coefficient alpha for the final instrument domains is 0.81, and all domain-total correlations are greater than 0.4. All correlations between the final instrument and the construct validity instruments were statistically significant (P job satisfaction, which is both internally consistent and stable.

  1. Conference Discussion: The Challenges in Multi-Object Spectroscopy Instrument and Survey Design, and in Data Processing and Analysis

    Science.gov (United States)

    Balcells, M.; Skillen, I.

    2016-10-01

    The final session of the conference Multi-Object Spectroscopy in the Next Decade: Big Questions, Large Surveys, and Wide Fields, held in La Palma 2-6 March 2015, was devoted to a discussion of the challenges in designing and operating the next-generation survey spectrographs, and planning and carrying out their massive surveys. The wide-ranging 1.5-hour debate was recorded on video tape, and in this paper we report the edited transcription of the dialog.

  2. Evaluation of the two non-consecutive 24-h recall instrument for pan-European food consumption surveys

    NARCIS (Netherlands)

    Crispim, S.P.

    2011-01-01

    Background: The comparability of food consumption data originating from national nutritional surveys in Europe is currently hampered because of different methodologies used. Therefore, experts in the European Food Consumption Survey Method (EFCOSUM) consortium proposed to use two non-consecutive 24-

  3. Trends in caesarean section and instrumental deliveries in relation to Body Mass Index: a clinical survey during 1978 - 2001

    Directory of Open Access Journals (Sweden)

    Josefsson Ann

    2010-07-01

    Full Text Available Abstract Background During the last 20 years the rate of CS has increased in Sweden as it has in many other countries. The proportion of pregnant women suffering from a high BMI has also increased rapidly during the same time period. It would therefore be of interest to study both how and if these two observations are related to each other. The aim was therefore to study trends in mode of caesarean section (CS and instrumental deliveries among women in three BMI groups over a time span of almost 25 years with special focus on the observed body weight of pregnant women. Method The design is a retrospective cohort study using medical records of consecutively delivered women at two delivery wards in South East Sweden during the years 1978, 1986, 1992, 1997 and 2001. Results No significant time-trends were found for CS and instrumental delivery within each BMI-group for the time period studied. The proportion of women with BMI ≥ 25 delivered by means of CS or instrumental delivery increased quite dramatically from 1978 to 2001 (χ2 test for trend; p Conclusion Overweight and obese pregnant women constitute a rapidly growing proportion of the total number of CS and instrumental deliveries. Planning and allocation of health resources must be adjusted to this fact and its implications.

  4. The Development of a Survey Instrument on South Dakota's School District Leadership Climate as Related to Deming's Fourteen Points.

    Science.gov (United States)

    Holmes, Lawrence W. O.; And Others

    Development of an instrument to measure baseline levels of applied Total Quality Management (TQM) practices in South Dakota before the introduction and dissemination of TQM theory to the state's educational leaders is described. Using the interpretation of Deming's 14 points that was developed by J. J. Bonstigl, a 115-item initial item pool was…

  5. The balanced scorecard as a potential instrument for supporting planning and improvement in accounting education: Comparative survey findings

    Directory of Open Access Journals (Sweden)

    CJ Cronje

    2015-04-01

    Full Text Available This paper is firstly a comparison of the components of a potential balanced scorecard for accounting departments of universities in South Africa and Australia. Secondly, the various suggested measurement criteria of the balanced scorecard components are also compared. The findings of the research paper indicate no significant differences. The conclusion is that the balanced scorecard constitutes a potential instrument for supporting the planning and improvement of the accounting education environment.

  6. Market assessment for active solar heating and cooling products. Category B: A survey of decision makers in the HVAC market place. Survey instruments

    Energy Technology Data Exchange (ETDEWEB)

    Lilien, G. L.; Johnston, P. E.

    1980-09-01

    Telephone screener questionnaires and mail-out questionnaires for marketing surveys for solar heating and cooling equipment are presented. Questionnaires are included for the residential segment, industrial segment, HVAC professionals segment, builder/developer segment, and the commercial segment. No results are reported. (WHK)

  7. Development of a Survey Instrument to Measure TEFL Academics' Perceptions about, Individual and Workplace Characteristics for Conducting Research

    Science.gov (United States)

    Bai, Li; Hudson, Peter; Millwater, Jan; Tones, Megan

    2013-01-01

    A 30-item survey was devised to determine Chinese TEFL (Teaching English as a Foreign Language) academics' potential for conducting research. A five-part Likert scale was used to gather data from 182 academics on four factors: (1) perceptions on teaching-research nexus, (2) personal perspectives for conducting research, (3) predispositions for…

  8. Relationships Among the Knowledge, Efficacy, and Practices Instrument, Color-Blind Racial Attitudes Scale, Deamonte Driver Survey, and Defining Issues Test 2.

    Science.gov (United States)

    Behar-Horenstein, Linda S; Garvan, Cynthia W

    2016-03-01

    Concordance studies indicate the degree to which instruments measure the same or similar constructs or something different. The aims of this study were to identify the factor structure of the Deamonte Driver Survey and determine the relationship between the Deamonte Driver (a measure of social class stereotyping), the Defining Issues Test 2 (DIT2; a measure of ethical sensitivity), the Color-Blind Racial Attitudes Scale (CoBRAS; a measure of racial stereotyping), and the Knowledge, Efficacy, and Practices Instrument (KEPI; a measure of cultural competence). The results showed a three-factor solution for the Deamonte Driver Survey and significant relationships between CoBRAS and DIT2 subscales and between CoBRAS and Deamonte Driver subscales. Significant relationships between the measures and exploratory variables, underrepresented minority status, age, citizenship, marital status, political stance, English as a first language, and gender were found. The lack of a significant relationship between the KEPI and Deamonte Driver, DIT2, or CoBRAS subscales suggests that the KEPI is measuring a unique construct. These findings showed how these scales contributed to the assessment of cultural competence among dental students and faculty.

  9. An analysis of determinants influencing use of ayurvedic medication in Pune region utilizing a questionnaire survey instrument

    Directory of Open Access Journals (Sweden)

    Vyawahare Neeraj

    2009-01-01

    The survey revealed that consumption of Ayurvedic medication in Pune region is increasing, wherein safety and faith are important parameters, however, like allopathic medication; people usually stick to the prescription issued by the physician. The increasing trend of self medication and lack of knowledge of herb drug interaction especially in non graduates are the major concerns need to be addressed for better outcome of the therapy.

  10. Effect of survey instrument on participation in a follow-up study: a randomization study of a mailed questionnaire versus a computer-assisted telephone interview

    Directory of Open Access Journals (Sweden)

    Rocheleau Carissa M

    2012-07-01

    Full Text Available Abstract Background Many epidemiological and public health surveys report increasing difficulty obtaining high participation rates. We conducted a pilot follow-up study to determine whether a mailed or telephone survey would better facilitate data collection in a subset of respondents to an earlier telephone survey conducted as part of the National Birth Defects Prevention Study. Methods We randomly assigned 392 eligible mothers to receive a self-administered, mailed questionnaire (MQ or a computer-assisted telephone interview (CATI using similar recruitment protocols. If mothers gave permission to contact the fathers, fathers were recruited to complete the same instrument (MQ or CATI as mothers. Results Mothers contacted for the MQ, within all demographic strata examined, were more likely to participate than those contacted for the CATI (86.6% vs. 70.6%. The median response time for mothers completing the MQ was 17 days, compared to 29 days for mothers completing the CATI. Mothers completing the MQ also required fewer reminder calls or letters to finish participation versus those assigned to the CATI (median 3 versus 6, though they were less likely to give permission to contact the father (75.0% vs. 85.8%. Fathers contacted for the MQ, however, had higher participation compared to fathers contacted for the CATI (85.2% vs. 54.5%. Fathers recruited to the MQ also had a shorter response time (median 17 days and required fewer reminder calls and letters (median 3 reminders than those completing the CATI (medians 28 days and 6 reminders. Conclusions We concluded that offering a MQ substantially improved participation rates and reduced recruitment effort compared to a CATI in this study. While a CATI has the advantage of being able to clarify answers to complex questions or eligibility requirements, our experience suggests that a MQ might be a good survey option for some studies.

  11. The Swiss Health Literacy Survey: development and psychometric properties of a multidimensional instrument to assess competencies for health

    Science.gov (United States)

    Wang, Jen; Thombs, Brett D.; Schmid, Margareta R.

    2012-01-01

    Abstract Background  Growing recognition of the role of citizens and patients in health and health care has placed a spotlight on health literacy and patient education. Objective  To identify specific competencies for health in definitions of health literacy and patient‐centred concepts and empirically test their dimensionality in the general population. Methods  A thorough review of the literature on health literacy, self‐management, patient empowerment, patient education and shared decision making revealed considerable conceptual overlap as competencies for health and identified a corpus of 30 generic competencies for health. A questionnaire containing 127 items covering the 30 competencies was fielded as a telephone interview in German, French and Italian among 1255 respondents randomly selected from the resident population in Switzerland. Findings  Analyses with the software MPlus to model items with mixed response categories showed that the items do not load onto a single factor. Multifactorial models with good fit could be erected for each of five dimensions defined a priori and their corresponding competencies: information and knowledge (four competencies, 17 items), general cognitive skills (four competencies, 17 items), social roles (two competencies, seven items), medical management (four competencies, 27 items) and healthy lifestyle (two competencies, six items). Multiple indicators and multiple causes models identified problematic differential item functioning for only six items belonging to two competencies. Conclusions  The psychometric analyses of this instrument support broader conceptualization of health literacy not as a single competence but rather as a package of competencies for health. PMID:22390287

  12. CARMENES instrument overview

    Science.gov (United States)

    Quirrenbach, A.; Amado, P. J.; Caballero, J. A.; Mundt, R.; Reiners, A.; Ribas, I.; Seifert, W.; Abril, M.; Aceituno, J.; Alonso-Floriano, F. J.; Ammler-von Eiff, M.; Antona Jiménez, R.; Anwand-Heerwart, H.; Azzaro, M.; Bauer, F.; Barrado, D.; Becerril, S.; Béjar, V. J. S.; Benítez, D.; Berdiñas, Z. M.; Cárdenas, M. C.; Casal, E.; Claret, A.; Colomé, J.; Cortés-Contreras, M.; Czesla, S.; Doellinger, M.; Dreizler, S.; Feiz, C.; Fernández, M.; Galadí, D.; Gálvez-Ortiz, M. C.; García-Piquer, A.; García-Vargas, M. L.; Garrido, R.; Gesa, L.; Gómez Galera, V.; González Álvarez, E.; González Hernández, J. I.; Grözinger, U.; Guàrdia, J.; Guenther, E. W.; de Guindos, E.; Gutiérrez-Soto, J.; Hagen, H.-J.; Hatzes, A. P.; Hauschildt, P. H.; Helmling, J.; Henning, T.; Hermann, D.; Hernández Castaño, L.; Herrero, E.; Hidalgo, D.; Holgado, G.; Huber, A.; Huber, K. F.; Jeffers, S.; Joergens, V.; de Juan, E.; Kehr, M.; Klein, R.; Kürster, M.; Lamert, A.; Lalitha, S.; Laun, W.; Lemke, U.; Lenzen, R.; López del Fresno, Mauro; López Martí, B.; López-Santiago, J.; Mall, U.; Mandel, H.; Martín, E. L.; Martín-Ruiz, S.; Martínez-Rodríguez, H.; Marvin, C. J.; Mathar, R. J.; Mirabet, E.; Montes, D.; Morales Muñoz, R.; Moya, A.; Naranjo, V.; Ofir, A.; Oreiro, R.; Pallé, E.; Panduro, J.; Passegger, V.-M.; Pérez-Calpena, A.; Pérez Medialdea, D.; Perger, M.; Pluto, M.; Ramón, A.; Rebolo, R.; Redondo, P.; Reffert, S.; Reinhardt, S.; Rhode, P.; Rix, H.-W.; Rodler, F.; Rodríguez, E.; Rodríguez-López, C.; Rodríguez-Pérez, E.; Rohloff, R.-R.; Rosich, A.; Sánchez-Blanco, E.; Sánchez Carrasco, M. A.; Sanz-Forcada, J.; Sarmiento, L. F.; Schäfer, S.; Schiller, J.; Schmidt, C.; Schmitt, J. H. M. M.; Solano, E.; Stahl, O.; Storz, C.; Stürmer, J.; Suárez, J. C.; Ulbrich, R. G.; Veredas, G.; Wagner, K.; Winkler, J.; Zapatero Osorio, M. R.; Zechmeister, M.; Abellán de Paco, F. J.; Anglada-Escudé, G.; del Burgo, C.; Klutsch, A.; Lizon, J. L.; López-Morales, M.; Morales, J. C.; Perryman, M. A. C.; Tulloch, S. M.; Xu, W.

    2014-07-01

    This paper gives an overview of the CARMENES instrument and of the survey that will be carried out with it during the first years of operation. CARMENES (Calar Alto high-Resolution search for M dwarfs with Exoearths with Near-infrared and optical Echelle Spectrographs) is a next-generation radial-velocity instrument under construction for the 3.5m telescope at the Calar Alto Observatory by a consortium of eleven Spanish and German institutions. The scientific goal of the project is conducting a 600-night exoplanet survey targeting ~ 300 M dwarfs with the completed instrument. The CARMENES instrument consists of two separate echelle spectrographs covering the wavelength range from 0.55 to 1.7 μm at a spectral resolution of R = 82,000, fed by fibers from the Cassegrain focus of the telescope. The spectrographs are housed in vacuum tanks providing the temperature-stabilized environments necessary to enable a 1 m/s radial velocity precision employing a simultaneous calibration with an emission-line lamp or with a Fabry-Perot etalon. For mid-M to late-M spectral types, the wavelength range around 1.0 μm (Y band) is the most important wavelength region for radial velocity work. Therefore, the efficiency of CARMENES has been optimized in this range. The CARMENES instrument consists of two spectrographs, one equipped with a 4k x 4k pixel CCD for the range 0.55 - 1.05 μm, and one with two 2k x 2k pixel HgCdTe detectors for the range from 0.95 - 1.7μm. Each spectrograph will be coupled to the 3.5m telescope with two optical fibers, one for the target, and one for calibration light. The front end contains a dichroic beam splitter and an atmospheric dispersion corrector, to feed the light into the fibers leading to the spectrographs. Guiding is performed with a separate camera; on-axis as well as off-axis guiding modes are implemented. Fibers with octagonal cross-section are employed to ensure good stability of the output in the presence of residual guiding errors. The

  13. Instrumentation in Earthquake Seismology

    Science.gov (United States)

    Havskov, Jens; Alguacil, Gerardo

    Here is unique and comprehensive coverage of modern seismic instrumentation, based on the authors' practical experience of a quarter-century in seismology and geophysics. Their goal is to provide not only detailed information on the basics of seismic instruments but also to survey equipment on the market, blending this with only the amount of theory needed to understand the basic principles. Seismologists and technicians working with seismological instruments will find here the answers to their practical problems.

  14. [Survey of analytical works for drugs at emergency and critical care centers with high-performance instruments provided by the Ministry of Health and Welfare (at present: Ministry of Health, Labour, and Welfare) in fiscal 1998--continuation of survey with 2008 survey results as point of reference].

    Science.gov (United States)

    Saito, Takeshi; Tominaga, Aya; Nozawa, Mayu; Unei, Hiroko; Hatano, Yayoi; Fujita, Yuji; Iseki, Ken; Hori, Yasushi

    2013-09-01

    In a 2008 survey of the 73 emergency and critical care centers around the nation that were equipped with the drug and chemical analytical instrument provided by the Ministry of Welfare (currently the Ministry of Health, Labour, and Welfare) in 1998, 36 of those facilities were using the analytical instruments. Of these 36 facilities, a follow-up survey of the 17 facilities that recorded 50 or analyses per year. Responses were gained from 16 of the facilities and we learned that of those, 14 facilities (87.5%) were conducting analyses using the instrument. There was a positive mutual correlation between the annual number of cases of the 14 facilities conducting analyses with the instrument and the number of work hours. Depending on the instrument in use, average analytical instrument parts and maintenance expenses were roughly three million yen and consumables required a maximum three million yen for analysis of 51-200 cases per year. From this, we calculate that such expenses can be covered under the allowed budget for advanced emergency and critical care centers of 5,000 NHI points (1 point = 10 yen). We found there were few facilities using the instrument for all 15 of the toxic substances recommended for testing by the Japanese Society for Clinical Toxicology. There tended to be no use of the analytical instrument for compounds with no toxicology cases. However, flexible responses were noted at each facility in relation to frequently analyzed compounds. It is thought that a reevaluation of compounds subject to analysis is required.

  15. The Dark Energy Spectroscopic Instrument (DESI)

    Science.gov (United States)

    Flaugher, Brenna; Bebek, Chris

    2014-07-01

    The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar spectroscopic redshift survey. The DESI instrument consists of a new wide-field (3.2 deg. linear field of view) corrector plus a multi-object spectrometer with up to 5000 robotically positioned optical fibers and will be installed at prime focus on the Mayall 4m telescope at Kitt Peak, Arizona. The fibers feed 10 three-arm spectrographs producing spectra that cover a wavelength range from 360-980 nm and have resolution of 2000-5500 depending on the wavelength. The DESI instrument is designed for a 14,000 sq. deg. multi-year survey of targets that trace the evolution of dark energy out to redshift 3.5 using the redshifts of luminous red galaxies (LRGs), emission line galaxies (ELGs) and quasars. DESI is the successor to the successful Stage-III BOSS spectroscopic redshift survey and complements imaging surveys such as the Stage-III Dark Energy Survey (DES, currently operating) and the Stage-IV Large Synoptic Survey Telescope (LSST, planned start early in the next decade).

  16. SURVEY

    DEFF Research Database (Denmark)

    SURVEY er en udbredt metode og benyttes inden for bl.a. samfundsvidenskab, humaniora, psykologi og sundhedsforskning. Også uden for forskningsverdenen er der mange organisationer som f.eks. konsulentfirmaer og offentlige institutioner samt marketingsafdelinger i private virksomheder, der arbejder...... med surveys. Denne bog gennemgår alle surveyarbejdets faser og giver en praktisk indføring i: • design af undersøgelsen og udvælgelse af stikprøver, • formulering af spørgeskemaer samt indsamling og kodning af data, • metoder til at analysere resultaterne...

  17. Observations of Binary Stars with the Differential Speckle Survey Instrument. V. Toward an Empirical Metal-Poor Mass-Luminosity Relation

    CERN Document Server

    Horch, Elliott P; Demarque, Pierre; Howell, Steve B; Everett, Mark E; Ciardi, David R; Teske, Johanna K; Henry, Todd J; Winters, Jennifer G

    2015-01-01

    In an effort to better understand the details of the stellar structure and evolution of metal poor stars, the Gemini North telescope was used on two occasions to take speckle imaging data of a sample of known spectroscopic binary stars and other nearby stars in order to search for and resolve close companions. The observations were obtained using the Differential Speckle Survey Instrument, which takes data in two filters simultaneously. The results presented here are of 90 observations of 23 systems in which one or more companions was detected, and 6 stars where no companion was detected to the limit of the camera capabilities at Gemini. In the case of the binary and multiple stars, these results are then further analyzed to make first orbit determinations in five cases, and orbit refinements in four other cases. Mass information is derived, and since the systems span a range in metallicity, a study is presented that compares our results with the expected trend in total mass as derived from the most recent Ya...

  18. Radioisotope instruments

    CERN Document Server

    Cameron, J F; Silverleaf, D J

    1971-01-01

    International Series of Monographs in Nuclear Energy, Volume 107: Radioisotope Instruments, Part 1 focuses on the design and applications of instruments based on the radiation released by radioactive substances. The book first offers information on the physical basis of radioisotope instruments; technical and economic advantages of radioisotope instruments; and radiation hazard. The manuscript then discusses commercial radioisotope instruments, including radiation sources and detectors, computing and control units, and measuring heads. The text describes the applications of radioisotop

  19. Chip Multithreaded Consistency Model

    Institute of Scientific and Technical Information of China (English)

    Zu-Song Li; Dan-Dan Huan; Wei-Wu Hu; Zhi-Min Tang

    2008-01-01

    Multithreaded technique is the developing trend of high performance processor. Memory consistency model is essential to the correctness, performance and complexity of multithreaded processor. The chip multithreaded consistency model adapting to multithreaded processor is proposed in this paper. The restriction imposed on memory event ordering by chip multithreaded consistency is presented and formalized. With the idea of critical cycle built by Wei-Wu Hu, we prove that the proposed chip multithreaded consistency model satisfies the criterion of correct execution of sequential consistency model. Chip multithreaded consistency model provides a way of achieving high performance compared with sequential consistency model and ensures the compatibility of software that the execution result in multithreaded processor is the same as the execution result in uniprocessor. The implementation strategy of chip multithreaded consistency model in Godson-2 SMT processor is also proposed. Godson-2 SMT processor supports chip multithreaded consistency model correctly by exception scheme based on the sequential memory access queue of each thread.

  20. 星源通掌上森林调查仪面积测量精度研究%A Study of Area Survey Precision Based on Xingyuantong Handhold Forest Inventory Instrument

    Institute of Scientific and Technical Information of China (English)

    李崇贵; 陈华安; 李春干

    2005-01-01

    Xingyuangtong handhold forest inventory instrument is a microcomputer-based Hi-tech product integrating remote sensing, mobile GIS and GPS, which is developed by 3S research center of Shenzhen Polytechnic. It can be used in forest resource inventory, area calculation on map, area survey on the spot, compartment and sub-compartment mapping and editing based on remote sensing images or scanned relief maps, interactive query and amendment between graphics and its attributes,etc. On the basis of theory analysis of area survey principle, the practical area survey precision of nine different-sized plots in different period of time and under different interfered conditions is analyzed in order to study the possible precision of area survey on the spot by using this product. It is demonstrated that Xinyuantong handhold forest resource inventory instrument can meet the precision needs of returning the grain plots to forestry, acceptance check of forestation land, area survey of compartment and subcompartment, etc. This product can be widely used in forest resource inventory.

  1. Consistency argued students of fluid

    Science.gov (United States)

    Viyanti; Cari; Suparmi; Winarti; Slamet Budiarti, Indah; Handika, Jeffry; Widyastuti, Fatma

    2017-01-01

    Problem solving for physics concepts through consistency arguments can improve thinking skills of students and it is an important thing in science. The study aims to assess the consistency of the material Fluid student argmentation. The population of this study are College students PGRI Madiun, UIN Sunan Kalijaga Yogyakarta and Lampung University. Samples using cluster random sampling, 145 samples obtained by the number of students. The study used a descriptive survey method. Data obtained through multiple-choice test and interview reasoned. Problem fluid modified from [9] and [1]. The results of the study gained an average consistency argmentation for the right consistency, consistency is wrong, and inconsistent respectively 4.85%; 29.93%; and 65.23%. Data from the study have an impact on the lack of understanding of the fluid material which is ideally in full consistency argued affect the expansion of understanding of the concept. The results of the study as a reference in making improvements in future studies is to obtain a positive change in the consistency of argumentations.

  2. Instrumentation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Provides instrumentation support for flight tests of prototype weapons systems using a vast array of airborne sensors, transducers, signal conditioning and encoding...

  3. Consistent model driven architecture

    Science.gov (United States)

    Niepostyn, Stanisław J.

    2015-09-01

    The goal of the MDA is to produce software systems from abstract models in a way where human interaction is restricted to a minimum. These abstract models are based on the UML language. However, the semantics of UML models is defined in a natural language. Subsequently the verification of consistency of these diagrams is needed in order to identify errors in requirements at the early stage of the development process. The verification of consistency is difficult due to a semi-formal nature of UML diagrams. We propose automatic verification of consistency of the series of UML diagrams originating from abstract models implemented with our consistency rules. This Consistent Model Driven Architecture approach enables us to generate automatically complete workflow applications from consistent and complete models developed from abstract models (e.g. Business Context Diagram). Therefore, our method can be used to check practicability (feasibility) of software architecture models.

  4. Hetdex: Virus Instrument

    Science.gov (United States)

    Lee, Hanshin; Hill, G. J.; DePoy, D. L.; Tuttle, S.; Marshall, J. L.; Vattiat, B. L.; Prochaska, T.; Chonis, T. S.; Allen, R.; HETDEX Collaboration

    2012-01-01

    The Visible Integral-field-unit Replicable Unit Spectrograph (VIRUS) instrument is made up of 150+ individually compact and identical spectrographs, each fed by a fiber integral-field unit. The instrument provides integral field spectroscopy at wavelengths between 350nm and 550nm of over 33,600 spatial elements per observation, each 1.8 sq. arcsec on the sky, at R 700. The instrument will be fed by a new wide-field corrector (WFC) of the Hobby-Eberly Telescope (HET) with increased science field of view as large as 22arcmin diameter and telescope aperture of 10m. This will enable the HETDEX, a large area blind survey of Lyman-alpha emitting galaxies at redshift z VIRUS instrument construction is summarized.

  5. No consistent bimetric gravity?

    CERN Document Server

    Deser, S; Waldron, A

    2013-01-01

    We discuss the prospects for a consistent, nonlinear, partially massless (PM), gauge symmetry of bimetric gravity (BMG). Just as for single metric massive gravity, ultimate consistency of both BMG and the putative PM BMG theory relies crucially on this gauge symmetry. We argue, however, that it does not exist.

  6. Surveys: an introduction.

    Science.gov (United States)

    Rubenfeld, Gordon D

    2004-10-01

    Surveys are a valuable research tool for studying the knowledge, attitudes, and behavior of a study population. This article explores quantitative analyses of written questionnaires as instruments for survey research. Obtaining accurate and precise information from a survey requires minimizing the possibility of bias from inappropriate sampling or a flawed survey instrument, and this article describes strategies to minimize sampling bias by increasing response rates, comparing responders to nonresponders, and identifying the appropriate sampling population. It is crucial that the survey instrument be valid, meaning that it actually measures what the investigator intends it to measure. In developing a valid survey instrument, it can be useful to adapt survey instruments that were developed by other researchers and to conduct extensive pilot-testing of your survey instrument.

  7. Islamic Astronomical Instruments and Observatories

    Science.gov (United States)

    Heidarzadeh, Tofigh

    This chapter is a brief survey of astronomical instruments being used and developed in Islamic territories from the eighth to the fifteenth centuries as well as a concise account of major observatories and observational programs in this period.

  8. Prizes for consistency

    Energy Technology Data Exchange (ETDEWEB)

    Hiscock, S.

    1986-07-01

    The importance of consistency in coal quality has become of increasing significance recently, with the current trend towards using coal from a range of sources. A significant development has been the swing in responsibilities for coal quality. The increasing demand for consistency in quality has led to a re-examination of where in the trade and transport chain the quality should be assessed and where further upgrading of inspection and preparation facilities are required. Changes are in progress throughout the whole coal transport chain which will improve consistency of delivered coal quality. These include installation of beneficiation plant at coal mines, export terminals, and on the premises of end users. It is suggested that one of the keys to success for the coal industry will be the ability to provide coal of a consistent quality.

  9. Consistent sets contradict

    CERN Document Server

    Kent, A

    1996-01-01

    In the consistent histories formulation of quantum theory, the probabilistic predictions and retrodictions made from observed data depend on the choice of a consistent set. We show that this freedom allows the formalism to retrodict several contradictory propositions which correspond to orthogonal commuting projections and which all have probability one. We also show that the formalism makes contradictory probability one predictions when applied to generalised time-symmetric quantum mechanics.

  10. Construction Of Critical Thinking Skills Test Instrument Related The Concept On Sound Wave

    Science.gov (United States)

    Mabruroh, F.; Suhandi, A.

    2017-02-01

    This study aimed to construct test instrument of critical thinking skills of high school students related the concept on sound wave. This research using a mixed methods with sequential exploratory design, consists of: 1) a preliminary study; 2) design and review of test instruments. The form of test instruments in essay questions, consist of 18 questions that was divided into 5 indicators and 8 sub-indicators of the critical thinking skills expressed by Ennis, with questions that are qualitative and contextual. Phases of preliminary study include: a) policy studies; b) survey to the school; c) and literature studies. Phases of the design and review of test instruments consist of two steps, namely a draft design of test instruments include: a) analysis of the depth of teaching materials; b) the selection of indicators and sub-indicators of critical thinking skills; c) analysis of indicators and sub-indicators of critical thinking skills; d) implementation of indicators and sub-indicators of critical thinking skills; and e) making the descriptions about the test instrument. In the next phase of the review test instruments, consist of: a) writing about the test instrument; b) validity test by experts; and c) revision of test instruments based on the validator.

  11. A Survey of Florida High School Instrumental Music Programs: Rationale for the Inclusion of Jazz Ensemble Experience in Music Teacher Training

    Science.gov (United States)

    Hinkle, Jonathan R.

    2011-01-01

    During the past 60 years, jazz music has slowly become recognized as a genre worthy of study in high school music programs throughout the United States. Only a few researchers have analyzed large samples of jazz-related instruction in instrumental music programs, and of these studies no data were collected to investigate the inclusion of jazz in…

  12. A Survey of Florida High School Instrumental Music Programs: Rationale for the Inclusion of Jazz Ensemble Experience in Music Teacher Training

    Science.gov (United States)

    Hinkle, Jonathan R.

    2011-01-01

    During the past 60 years, jazz music has slowly become recognized as a genre worthy of study in high school music programs throughout the United States. Only a few researchers have analyzed large samples of jazz-related instruction in instrumental music programs, and of these studies no data were collected to investigate the inclusion of jazz in…

  13. The Student Human Papillomavirus Survey: Nurse-Led Instrument Development and Psychometric Testing to Increase Human Papillomavirus Vaccine Series Completion in Young Adults.

    Science.gov (United States)

    Thomas, Tami; Dalmida, Safyia; Higgins, Melinda

    2016-01-01

    The Student Human Papillomavirus Survey (SHPVS) was developed to examine students' perceived benefits or barriers to human papillomavirus (HPV) vaccination. Survey development included (a) 2-phase integrative literature reviews; (b) draft of survey items based on the literature; (c) critique of survey items by young adults, nursing and psychology faculty, and health care providers; and (d) pilot testing. The psychometric properties of the SHPVS were evaluated using classical item analysis and exploratory factor analysis (EFA) among a sample of 527 university students' ages 18-24 years. The estimated Cronbach's alpha for the SHPVS is .74. The SHPVS is a measure of young adults HPV perceived vulnerability, perceived severity, perceived barriers, and perceived benefits of HPV vaccination.

  14. Luminescence Instrumentation

    DEFF Research Database (Denmark)

    Jain, Mayank; Bøtter-Jensen, Lars

    2014-01-01

    This chapter gives an introduction to instrumentation for stimulated luminescence studies, with special focus on luminescence dating using the natural dosimeters, quartz and feldspars. The chapter covers basic concepts in luminescence detection, and thermal and optical stimulation, and reference...

  15. The development and testing of the nurses' cardiac triage instrument.

    Science.gov (United States)

    Arslanian-Engoren, Cynthia; Hagerty, Bonnie M

    2013-01-01

    Rapid recognition and treatment of myocardial infarction (MI) reduces morbidity and mortality. Although emergency department (ED) nurses are often the first provider to evaluate individuals and are in a prime position to initiate MI guideline recommendations, no valid and reliable instrument was found to quantify their decision-making processes. The purpose of this study was to develop and test the psychometric properties of a new theoretically driven, empirically based instrument for measuring nurses' cardiac triage decisions. Using a descriptive research design, data were collected using a mailed survey. There were 158 ED nurses who completed a mailed questionnaire. Factor analysis revealed three factors (patient presentation, unbiased nurse reasoning process, and nurse action) with good internal consistency (Cronbach's alpha = .903, .809, .718) and sample adequacy (KMO = .758) of the 30-item instrument. The newly developed instrument has the potential to improve patient outcomes surrounding early MI identification and treatment.

  16. Network Consistent Data Association.

    Science.gov (United States)

    Chakraborty, Anirban; Das, Abir; Roy-Chowdhury, Amit K

    2016-09-01

    Existing data association techniques mostly focus on matching pairs of data-point sets and then repeating this process along space-time to achieve long term correspondences. However, in many problems such as person re-identification, a set of data-points may be observed at multiple spatio-temporal locations and/or by multiple agents in a network and simply combining the local pairwise association results between sets of data-points often leads to inconsistencies over the global space-time horizons. In this paper, we propose a Novel Network Consistent Data Association (NCDA) framework formulated as an optimization problem that not only maintains consistency in association results across the network, but also improves the pairwise data association accuracies. The proposed NCDA can be solved as a binary integer program leading to a globally optimal solution and is capable of handling the challenging data-association scenario where the number of data-points varies across different sets of instances in the network. We also present an online implementation of NCDA method that can dynamically associate new observations to already observed data-points in an iterative fashion, while maintaining network consistency. We have tested both the batch and the online NCDA in two application areas-person re-identification and spatio-temporal cell tracking and observed consistent and highly accurate data association results in all the cases.

  17. Reporting consistently on CSR

    DEFF Research Database (Denmark)

    Thomsen, Christa; Nielsen, Anne Ellerup

    2006-01-01

    of a case study showing that companies use different and not necessarily consistent strategies for reporting on CSR. Finally, the implications for managerial practice are discussed. The chapter concludes by highlighting the value and awareness of the discourse and the discourse types adopted......This chapter first outlines theory and literature on CSR and Stakeholder Relations focusing on the different perspectives and the contextual and dynamic character of the CSR concept. CSR reporting challenges are discussed and a model of analysis is proposed. Next, our paper presents the results...... in the reporting material. By implementing consistent discourse strategies that interact according to a well-defined pattern or order, it is possible to communicate a strong social commitment on the one hand, and to take into consideration the expectations of the shareholders and the other stakeholders...

  18. A Magnetic Consistency Relation

    CERN Document Server

    Jain, Rajeev Kumar

    2012-01-01

    If cosmic magnetic fields are indeed produced during inflation, they are likely to be correlated with the scalar metric perturbations that are responsible for the Cosmic Microwave Background anisotropies and Large Scale Structure. Within an archetypical model of inflationary magnetogenesis, we show that there exists a new simple consistency relation for the non-Gaussian cross correlation function of the scalar metric perturbation with two powers of the magnetic field in the squeezed limit where the momentum of the metric perturbation vanishes. We emphasize that such a consistency relation turns out to be extremely useful to test some recent calculations in the literature. Apart from primordial non-Gaussianity induced by the curvature perturbations, such a cross correlation might provide a new observational probe of inflation and can in principle reveal the primordial nature of cosmic magnetic fields.

  19. Consistency in Distributed Systems

    OpenAIRE

    Kemme, Bettina; Ramalingam, Ganesan; Schiper, André; Shapiro, Marc; Vaswani, Kapil

    2013-01-01

    International audience; In distributed systems, there exists a fundamental trade-off between data consistency, availability, and the ability to tolerate failures. This trade-off has significant implications on the design of the entire distributed computing infrastructure such as storage systems, compilers and runtimes, application development frameworks and programming languages. Unfortunately, it also has significant, and poorly understood, implications for the designers and developers of en...

  20. Geometrically Consistent Mesh Modification

    KAUST Repository

    Bonito, A.

    2010-01-01

    A new paradigm of adaptivity is to execute refinement, coarsening, and smoothing of meshes on manifolds with incomplete information about their geometry and yet preserve position and curvature accuracy. We refer to this collectively as geometrically consistent (GC) mesh modification. We discuss the concept of discrete GC, show the failure of naive approaches, and propose and analyze a simple algorithm that is GC and accuracy preserving. © 2010 Society for Industrial and Applied Mathematics.

  1. Consistent wind Facilitates Vection

    Directory of Open Access Journals (Sweden)

    Masaki Ogawa

    2011-10-01

    Full Text Available We examined whether a consistent haptic cue suggesting forward self-motion facilitated vection. We used a fan with no blades (Dyson, AM01 providing a wind of constant strength and direction (wind speed was 6.37 m/s to the subjects' faces with the visual stimuli visible through the fan. We used an optic flow of expansion or contraction created by positioning 16,000 dots at random inside a simulated cube (length 20 m, and moving the observer's viewpoint to simulate forward or backward self-motion of 16 m/s. we tested three conditions for fan operation, which were normal operation, normal operation with the fan reversed (ie, no wind, and no operation (no wind and no sound. Vection was facilitated by the wind (shorter latency, longer duration and larger magnitude values with the expansion stimuli. The fan noise did not facilitate vection. The wind neither facilitated nor inhibited vection with the contraction stimuli, perhaps because a headwind is not consistent with backward self-motion. We speculate that the consistency between multi modalities is a key factor in facilitating vection.

  2. Instrumented SSH

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, Scott; Campbell, Scott

    2009-05-27

    NERSC recently undertook a project to access and analyze Secure Shell (SSH) related data. This includes authentication data such as user names and key fingerprints, interactive session data such as keystrokes and responses, and information about noninteractive sessions such as commands executed and files transferred. Historically, this data has been inaccessible with traditional network monitoring techniques, but with a modification to the SSH daemon, this data can be passed directly to intrusion detection systems for analysis. The instrumented version of SSH is now running on all NERSC production systems. This paper describes the project, details about how SSH was instrumented, and the initial results of putting this in production.

  3. Infanticide and moral consistency.

    Science.gov (United States)

    McMahan, Jeff

    2013-05-01

    The aim of this essay is to show that there are no easy options for those who are disturbed by the suggestion that infanticide may on occasion be morally permissible. The belief that infanticide is always wrong is doubtfully compatible with a range of widely shared moral beliefs that underlie various commonly accepted practices. Any set of beliefs about the morality of abortion, infanticide and the killing of animals that is internally consistent and even minimally credible will therefore unavoidably contain some beliefs that are counterintuitive.

  4. The Rucio Consistency Service

    CERN Document Server

    Serfon, Cedric; The ATLAS collaboration

    2016-01-01

    One of the biggest challenge with Large scale data management system is to ensure the consistency between the global file catalog and what is physically on all storage elements. To tackle this issue, the Rucio software which is used by the ATLAS Distributed Data Management system has been extended to automatically handle lost or unregistered files (aka Dark Data). This system automatically detects these inconsistencies and take actions like recovery or deletion of unneeded files in a central manner. In this talk, we will present this system, explain the internals and give some results.

  5. When is holography consistent?

    Energy Technology Data Exchange (ETDEWEB)

    McInnes, Brett, E-mail: matmcinn@nus.edu.sg [National University of Singapore (Singapore); Ong, Yen Chin, E-mail: yenchin.ong@nordita.org [Nordita, KTH Royal Institute of Technology and Stockholm University, Roslagstullsbacken 23, SE-106 91 Stockholm (Sweden)

    2015-09-15

    Holographic duality relates two radically different kinds of theory: one with gravity, one without. The very existence of such an equivalence imposes strong consistency conditions which are, in the nature of the case, hard to satisfy. Recently a particularly deep condition of this kind, relating the minimum of a probe brane action to a gravitational bulk action (in a Euclidean formulation), has been recognized; and the question arises as to the circumstances under which it, and its Lorentzian counterpart, is satisfied. We discuss the fact that there are physically interesting situations in which one or both versions might, in principle, not be satisfied. These arise in two distinct circumstances: first, when the bulk is not an Einstein manifold and, second, in the presence of angular momentum. Focusing on the application of holography to the quark–gluon plasma (of the various forms arising in the early Universe and in heavy-ion collisions), we find that these potential violations never actually occur. This suggests that the consistency condition is a “law of physics” expressing a particular aspect of holography.

  6. [Evaluation of the level of dependency of persons placed in establishments for chronic patients. Development of a survey instrument and studies of validity, pertinence and performance].

    Science.gov (United States)

    Lehmann, P; Martin, J

    1984-01-01

    With the aim to achieve a more equitable budgetary allocation to nursing homes, an instrument for the evaluation of the patients' dependency has been developed and tested in 55 institutions, for a total of about 23000 observations. Statistical analyses show that the internal validity of the gathered data is quite good. The tool criteria are judged relevant by experts, and the tool performance is adequate: its use should permit the constitution of groups (clustering) of nursing homes homogeneous from the point of view of their nursing care load.

  7. Validation of the Care-Related Quality of Life Instrument in different study settings: findings from The Older Persons and Informal Caregivers Survey Minimum DataSet (TOPICS-MDS).

    Science.gov (United States)

    Lutomski, J E; van Exel, N J A; Kempen, G I J M; Moll van Charante, E P; den Elzen, W P J; Jansen, A P D; Krabbe, P F M; Steunenberg, B; Steyerberg, E W; Olde Rikkert, M G M; Melis, R J F

    2015-05-01

    Validity is a contextual aspect of a scale which may differ across sample populations and study protocols. The objective of our study was to validate the Care-Related Quality of Life Instrument (CarerQol) across two different study design features, sampling framework (general population vs. different care settings) and survey mode (interview vs. written questionnaire). Data were extracted from The Older Persons and Informal Caregivers Minimum DataSet (TOPICS-MDS, www.topics-mds.eu ), a pooled public-access data set with information on >3,000 informal caregivers throughout the Netherlands. Meta-correlations and linear mixed models between the CarerQol's seven dimensions (CarerQol-7D) and caregiver's level of happiness (CarerQol-VAS) and self-rated burden (SRB) were performed. The CarerQol-7D dimensions were correlated to the CarerQol-VAS and SRB in the pooled data set and the subgroups. The strength of correlations between CarerQol-7D dimensions and SRB was weaker among caregivers who were interviewed versus those who completed a written questionnaire. The directionality of associations between the CarerQol-VAS, SRB and the CarerQol-7D dimensions in the multivariate model supported the construct validity of the CarerQol in the pooled population. Significant interaction terms were observed in several dimensions of the CarerQol-7D across sampling frame and survey mode, suggesting meaningful differences in reporting levels. Although good scientific practice emphasises the importance of re-evaluating instrument properties in individual research studies, our findings support the validity and applicability of the CarerQol instrument in a variety of settings. Due to minor differential reporting, pooling CarerQol data collected using mixed administration modes should be interpreted with caution; for TOPICS-MDS, meta-analytic techniques may be warranted.

  8. Active instruments

    DEFF Research Database (Denmark)

    Lim, Miguel Antonio; Ørberg, Jakob Williams

    2017-01-01

    ) show the dynamic nature of policy processes, and (3) consider the search for policy reference points among the different actors. We present rankers in motion, policies in motion, and finally the complex nature of the ranking device that needs to be both a relevant and malleable policy instrument...

  9. Consistent quantum measurements

    Science.gov (United States)

    Griffiths, Robert B.

    2015-11-01

    In response to recent criticisms by Okon and Sudarsky, various aspects of the consistent histories (CH) resolution of the quantum measurement problem(s) are discussed using a simple Stern-Gerlach device, and compared with the alternative approaches to the measurement problem provided by spontaneous localization (GRW), Bohmian mechanics, many worlds, and standard (textbook) quantum mechanics. Among these CH is unique in solving the second measurement problem: inferring from the measurement outcome a property of the measured system at a time before the measurement took place, as is done routinely by experimental physicists. The main respect in which CH differs from other quantum interpretations is in allowing multiple stochastic descriptions of a given measurement situation, from which one (or more) can be selected on the basis of its utility. This requires abandoning a principle (termed unicity), central to classical physics, that at any instant of time there is only a single correct description of the world.

  10. Parental Human Papillomavirus Vaccine Survey (PHPVS): nurse-led instrument development and psychometric testing for use in research and primary care screening.

    Science.gov (United States)

    Thomas, Tami Lynn; Strickland, Ora L; DiClemente, Ralph; Higgins, Melinda; Williams, Bryan; Hickey, Kathleen

    2013-01-01

    Human papillomavirus (HPV) vaccine was approved for girls aged 9-24 years in 2006 to prevent HPV infection and cervical cancer. The Parental Human Papillomavirus Survey (PHPVS) was framed on theoretical constructs of the health belief model (HBM) and developed to survey parents regarding their HPV knowledge, attitudes, and intent to vaccinate. We evaluated the psychometric properties of the PHPVS using classical item analysis and exploratory factor analysis (EFA) among a sample of 200 parents/caregivers. The EFA yielded a 4-factor unidimensional model that explained between 62% and 68% of the total variance depending on the extraction method used. The estimated Cronbach's alpha for the PHPVS was .96. The PHPVS is a reliable measure of HPV knowledge, attitudes, and intent to vaccinate.

  11. Status of ART-XC/SRG Instrument

    Science.gov (United States)

    Pavlinsky, M.; Akimov, V.; Levin, V.; Lapshov, I.; Tkachenko, A.; Semena, N.; Buntov, M.; Glushenko, A.; Arefiev, V.; Yaskovich, A.; Sunyaev, R.; Churazov, E.; Gilfanov, M.; Grebenev, S.; Sazonov, S.; Revnivtsev, M.; Lutovinov, A.; Molkov, S.; Kudelin, M.; Drozdova, T.; Garanin, S.; Grigorovich, S.; Litvin, D.; Lazarchuk, V.; Roiz, I.; Garin, M.; Babyshkin, V.; Lomakin, I.; Menderov, A.; Moskvinov, D.; Gubarev, M.; Ramsey, B.; Kilaru, K.; ODell, S. L.; Kolodziejczak, J.; Elsner, R.

    2014-01-01

    Spectrum Roentgen Gamma (SRG) is an X-ray astrophysical observatory, developed by Russia in collaboration with Germany. The mission will be launched in March 2016 from Baikonur, by a Zenit rocket with a Fregat booster and placed in a 6-month-period halo orbit around L2. The scientific payload consists of two independent telescopes - a soft-x-ray survey instrument, eROSITA, being provided by Germany and a medium-x-ray-energy survey instrument ART-XC being developed by Russia. ART-XC will consist of seven independent, but co-aligned, telescope modules. The NASA Marshall Space Flight Center (MSFC) is fabricating the flight mirror modules for the ART-XC/SRG. Each mirror module will be aligned with a focal plane CdTe double-sided strip detectors which will operate over the energy range of 6-30 keV, with an angular resolution of less than 1', a field of view of approximately 34' and an expected energy resolution of about 10 percent at 14 keV.

  12. When Is Holography Consistent?

    CERN Document Server

    McInnes, Brett

    2015-01-01

    Holographic duality relates two radically different kinds of theory: one with gravity, one without. The very existence of such an equivalence imposes strong consistency conditions which are, in the nature of the case, hard to satisfy. Recently a particularly deep condition of this kind, relating the minimum of a probe brane action to a gravitational bulk action (in a Euclidean formulation), has been recognised; and the question arises as to the circumstances under which it, and its Lorentzian counterpart, are satisfied. We discuss the fact that there are physically interesting situations in which one or both versions might, in principle, \\emph{not} be satisfied. These arise in two distinct circumstances: first, when the bulk is not an Einstein manifold, and, second, in the presence of angular momentum. Focusing on the application of holography to the quark-gluon plasma (of the various forms arising in the early Universe and in heavy-ion collisions), we find that these potential violations never actually occur...

  13. Pancreatitis Quality of Life Instrument: Development of a new instrument

    Directory of Open Access Journals (Sweden)

    Wahid Wassef

    2014-02-01

    Full Text Available Objectives: The goal of this project was to develop the first disease-specific instrument for the evaluation of quality of life in chronic pancreatitis. Methods: Focus groups and interview sessions were conducted, with chronic pancreatitis patients, to identify items felt to impact quality of life which were subsequently formatted into a paper-and-pencil instrument. This instrument was used to conduct an online survey by an expert panel of pancreatologists to evaluate its content validity. Finally, the modified instrument was presented to patients during precognitive testing interviews to evaluate its clarity and appropriateness. Results: In total, 10 patients were enrolled in the focus groups and interview sessions where they identified 50 items. Once redundant items were removed, the 40 remaining items were made into a paper-and-pencil instrument referred to as the Pancreatitis Quality of Life Instrument. Through the processes of content validation and precognitive testing, the number of items in the instrument was reduced to 24. Conclusions: This marks the development of the first disease-specific instrument to evaluate quality of life in chronic pancreatitis. It includes unique features not found in generic instruments (economic factors, stigma, and spiritual factors. Although this marks a giant step forward, psychometric evaluation is still needed prior to its clinical use.

  14. Coseismic Deformations Associated with the M=7.2, April 04, 2010, El Mayor-Cucapah Earthquake, Observed from Leveling Survey, Geotechnical Instruments and Water Level Changes in the Mexicali Valley

    Science.gov (United States)

    Glowacka, E.; Robles, B.; Vázquez, R.; Sarychikhina, O.; Suárez-Vidal, F.; Ramirez, J.; Nava Pichardo, F. A.; Farfan, F.; Diaz de Cossio, G.

    2010-12-01

    A first order, second class leveling survey in the Mexicali Valley had been just finished in February 2010, for a project carried out by CICESE (Center for Scientific Research and Higher Education of Ensenada), IMTA (Mexican Institute of Water Technology) and CONAGUA (National Water Comission). Immediately after the M=7.2 earthquake the survey was repeated along 240 km of the profiles in the area of the Cerro Prieto pull-apart basin. The leveling started at the LN00 GPS monument in La Puerta. Overall, an uplift of about 30 cm towards the NE, along the 38 km line, in direction SW-NE is observed with larger gradient to the South of the area. Three subsidence bowls differ from this general pattern. One, south from Ejido Saltillo, with the relative subsidence of 19 cm (considering the displacement at LN00 as zero subsidence), probably reflects subsidence of the Saltillo-Guerrero graben; the second, with a subsidence of 23 cm, is situated south from Ejido Nuevo Leon and can be related to the subsidence triggered by the earthquake in the production area of Cerro Prieto IV. For the third one, with relative depth of 36 cm, situated close to Zacamoto, the southeastern limit cannot be determined, so only a comparison with other methods can explain the origin of this anomaly. All the subsidence bowls are associated with liquefaction observed in the area, with more liquefaction observed close to Zacamoto. Since 1996, CICESE has been operating a network of geotechnical instruments (REDECVAM) for continuous recording of deformation related to tectonic (seismic and interseismic) phenomena, as well as anthropogenic deformation caused by the deep fluid extraction at the Cerro Prieto Geothermal Field. The instruments are installed along the faults which limit the Cerro Prieto pull-apart basin at a distance from 8 to 15 km from the epicenter. Coseismic step-like groundwater level changes ranging from 0.4 to 5.0 meters were recorded at 4 wells in the Cerro Prieto Pull apart

  15. Policy Dialogue and Engagement between Non-Governmental Organizations and Government: A Survey of Processes and Instruments of Canadian Policy Workers

    Directory of Open Access Journals (Sweden)

    Bryan Mitchell Evans

    2013-07-01

    Full Text Available Various analysts have raised concerns respecting declining research, evaluation and analytical capacities within public services. Typically, the decline is attributed to reforms associated with neoliberal restructuring of the state and its concomitant managerial expression in New Public Management (NPM.  This has given rise to a conceptual shift now commonly captured as a movement from ‘government’ to ‘governance’. Policy advising from a new governance perspective entails an image of a more distributed policy advisory system where a plurality of actors, including non-state actors, engages with government in deliberating policy interventions to address collective problems.The original research presented here suggests that those responsible for policy work across four policy communities in the three Canadian provinces surveyed differ in terms of their capacities, depth of commitment to a specific policy file/field, roles and functions, as well as perceptions of the policy work that they undertake. Over the past several years, a number of primarily quantitative analyses examining the processes, tools and perspectives of Canadian federal and provincial government policy analysts have been published.  Consequently, a significant knowledge-base has been acquired respecting what government policy analysts do and their attitudes toward their work but very little is known about external interactions with non-governmental organizations (NGOs.

  16. Virtual Sensor Test Instrumentation

    Science.gov (United States)

    Wang, Roy

    2011-01-01

    Virtual Sensor Test Instrumentation is based on the concept of smart sensor technology for testing with intelligence needed to perform sell-diagnosis of health, and to participate in a hierarchy of health determination at sensor, process, and system levels. A virtual sensor test instrumentation consists of five elements: (1) a common sensor interface, (2) microprocessor, (3) wireless interface, (4) signal conditioning and ADC/DAC (analog-to-digital conversion/ digital-to-analog conversion), and (5) onboard EEPROM (electrically erasable programmable read-only memory) for metadata storage and executable software to create powerful, scalable, reconfigurable, and reliable embedded and distributed test instruments. In order to maximize the efficient data conversion through the smart sensor node, plug-and-play functionality is required to interface with traditional sensors to enhance their identity and capabilities for data processing and communications. Virtual sensor test instrumentation can be accessible wirelessly via a Network Capable Application Processor (NCAP) or a Smart Transducer Interlace Module (STIM) that may be managed under real-time rule engines for mission-critical applications. The transducer senses the physical quantity being measured and converts it into an electrical signal. The signal is fed to an A/D converter, and is ready for use by the processor to execute functional transformation based on the sensor characteristics stored in a Transducer Electronic Data Sheet (TEDS). Virtual sensor test instrumentation is built upon an open-system architecture with standardized protocol modules/stacks to interface with industry standards and commonly used software. One major benefit for deploying the virtual sensor test instrumentation is the ability, through a plug-and-play common interface, to convert raw sensor data in either analog or digital form, to an IEEE 1451 standard-based smart sensor, which has instructions to program sensors for a wide variety of

  17. Optical Instruments

    Science.gov (United States)

    1990-01-01

    Precision Lapping and Optical Co. has developed a wide variety of hollow retroreflector systems for applications involving the entire optical spectrum; they are, according to company literature, cheaper, more accurate, lighter and capable of greater size than solid prisms. Precision Lapping's major customers are aerospace and defense companies, government organizations, R&D and commercial instrument companies. For example, Precision Lapping supplies hollow retroreflectors for the laser fire control system of the Army's Abrams tank, and retroreflectors have been and are being used in a number of space tests relative to the Air Force's Strategic Defense Initiative research program. An example of a customer/user is Chesapeake Laser Systems, producer of the Laser Tracker System CMS-2000, which has applications in SDI research and industrial robotics. Another customer is MDA Scientific, Inc., manufacturer of a line of toxic gas detection systems used to monitor hazardous gases present in oil fields, refineries, offshore platforms, chemical plants, waste storage sites and other locations where gases are released into the environment.

  18. Investigating consistency of a pro-market perspective amongst conservationists

    Directory of Open Access Journals (Sweden)

    Libby Blanchard

    2016-01-01

    Full Text Available While biodiversity conservation has had a longstanding relationship with markets, the recent past has seen a proliferation of novel market-based instruments in conservation such as payments for ecosystem services. Whilst a number of conservation organisations have aligned themselves with this 'neoliberal' shift, relatively few studies interrogate the extent to which this move resonates with the values held by conservation professionals. An earlier study of the views of conservationists participating in the 2011 Society for Conservation Biology conference found both supportive and critical perspectives on the use of markets in conservation (Sandbrook et al. 2013b. This paper investigates the consistency of the perspectives identified in the earlier study by applying the same Q methodology survey to a group of Cambridge, UK-based conservationists. While both studies reveal supporting and more sceptical perspectives on the use of markets in conservation, the pro-market perspective in each sample is nearly identical. This finding provides empirical confirmation of a growing body of research that suggests that a relatively consistent set of pro-market perspectives have permeated the thinking of decision makers and staff of conservation organisations. It also lends some support to the suggestion that a transnational conservation elite may be driving this uptake of market approaches.

  19. The integration of similar clinical research data collection instruments.

    Science.gov (United States)

    Cohen, Dorothy B; Frawley, Sandra J; Shifman, Mark A; Miller, Perry L; Brandt, Cynthia

    2003-01-01

    We devised an algorithm for integrating similar clinical research data collection instruments to create a common measurement instrument. We tested this algorithm using questions from several similar surveys. We encountered differing levels of granularity among questions and responses across surveys resulting in either the loss of granularity or data. This algorithm may make survey integration more systematic and efficient.

  20. Hadoop instrumentation

    OpenAIRE

    Montero Rivero, Alejandro

    2016-01-01

    Hadoop es actualmente uno de los principales frameworks para analizar Big Data, uno de sus inconvenientes es la poca cantidad de métricas de rendimiento que se conocen sobre el. El proyecto consiste en crear una herramienta que permita extraer métricas de rendimiento de Hadoop en tiempo de ejecución Hadoop is one of the most used frameworks to analyse Big Data, though one of it's main disadvantatges is the low number of metrics that are available. This project aims to create a new tool tha...

  1. Hadoop instrumentation

    OpenAIRE

    Montero Rivero, Alejandro

    2016-01-01

    Hadoop es actualmente uno de los principales frameworks para analizar Big Data, uno de sus inconvenientes es la poca cantidad de métricas de rendimiento que se conocen sobre el. El proyecto consiste en crear una herramienta que permita extraer métricas de rendimiento de Hadoop en tiempo de ejecución Hadoop is one of the most used frameworks to analyse Big Data, though one of it's main disadvantatges is the low number of metrics that are available. This project aims to create a new tool tha...

  2. Evaluating the Relational Coordination instrument

    DEFF Research Database (Denmark)

    Edwards, Kasper; Lundstrøm, Sanne Lykke

    2014-01-01

    and surgical performance. This has prompted the attention of both practitioners and politicians some of who perceive relational coordination as a means to attain better performance. The relational coordination instrument has been validated as a measure of teamwork from the following perspectives: internal...... consistency, interrater agreement and reliability, structural validity, content validity. However as relational coordination is being used as a diagnostics tool it is important to examine further if the instrument can measure changes. Indeed we need to know how precise and sensitive the instrument is when...

  3. Plane and geodetic surveying

    CERN Document Server

    Johnson, Aylmer

    2004-01-01

    Plane and Geodetic Surveying blends theory and practice, conventional techniques and GPS, to provide the ideal book for students of surveying.Detailed guidance is given on how and when the principle surveying instruments (theodolites, Total Stations, levels and GPS) should be used. Concepts and formulae needed to convert instrument readings into useful results are explained. Rigorous explanations of the theoretical aspects of surveying are given, while at the same time a wealth of useful advice about conducting a survey in practice is provided. An accompanying least squares adjustment program

  4. Optimising the effect of policy instruments

    DEFF Research Database (Denmark)

    Pedersen, Anders Branth; Nielsen, Helle Ørsted; Christensen, Tove

    2012-01-01

    as a case, this paper examines whether non-economic rationales may trump economic ones in farmer decisions, and, unlike previous research, we quantify how widespread non-economic values are compared to more economic values. Data derive from a survey (1164 responses) of Danish conventional farmers' decision...... to policy instruments; farmers who focus on yield indicate less responsiveness to economic policy instruments. The results imply that it is important to implement a broad array of policy instruments to match different farmer rationales....

  5. Instrumentation for Environmental Monitoring: Water, Volume 2.

    Science.gov (United States)

    California Univ., Berkeley. Lawrence Berkeley Lab.

    This volume is one of a series discussing instrumentation for environmental monitoring. Each volume contains an overview of the basic problems, comparisons among the basic methods of sensing and detection, and notes that summarize the characteristics of presently available instruments and techniques. The text of this survey discusses the…

  6. The 4MOST instrument concept overview

    NARCIS (Netherlands)

    Haynes, Roger; Barden, Samuel; de Jong, Roelof; Schnurr, Olivier; Bellido, Olga; Walcher, Jakob; Haynes, Dionne; Winkler, Roland; Bauer, Svend-Marian; Dionies, Frank; Saviauk, Allar; Chiappini, Cristina; Schwope, Axel; Brynnel, Joar; Steinmetz, Matthias; McMahon, Richard; Feltzing, Sofia; Francois, Patrick; Trager, Scott; Parry, Ian; Irwin, Mike; Walton, Nicholas; King, David; Sun, David; Gonzalez-Solares, Eduaro; Tosh, Ian; Dalton, Gavin; Middleton, Kevin; Bonifacio, Piercarlo; Jagourel, Pascal; Mignot, Shan; Cohen, Mathieu; Amans, Jean-Philippe; Royer, Frederic; Sartoretti, Paola; Pragt, Johan; Gerlofsma, Gerrit; Roelfsema, Ronald; Navarro, Ramon; Thimm, Guido; Seifert, Walter; Christlieb, Norbert; Mandel, Holger; Trifonov, Trifon; Xu, Wenli; Lang-Bardl, Florian; Muschielok, Bernard; Schlichter, Jörg; Hess, Hans-Joachim; Grupp, Frank; Boehringer, Hans; Boller, Thomas; Dwelly, Tom; Bender, Ralf; Rosati, Piero; Iwert, Olaf; Finger, Gert; Lizon L'Allemand, Jean-Louis; Saunders, Will; Sheinis, Andrew; Frost, Gabriella; Farrell, Tony; Waller, Lewis; Depagne, Eric; Laurent, Florence; Caillier, Patrick; Kosmalski, Johan; Richard, Johan; Bacon, Roland; Ansorge, Wolfgang

    2014-01-01

    The 4MOST[1] instrument is a concept for a wide-field, fibre-fed high multiplex spectroscopic instrument facility on the ESO VISTA telescope designed to perform a massive (initially >25x106 spectra in 5 years) combined all-sky public survey. The main science drivers are: Gaia follow up of chemo-dyna

  7. 浅谈新技术、新仪器在城市测绘中的应用%Discussion on New Technologies and New Instruments in Urban Surveying Applications

    Institute of Scientific and Technical Information of China (English)

    侯惠儒

    2012-01-01

    伴随着测绘科学技术的不断进步发展,城市测绘涌现出很多新技术、新仪器。GPS网络RTK技术、电子水准仪、三维全景采集车、数字城市、探地雷达、三维地下管线信息系统正是这些科技发展的前沿。介绍了这几种常见新技术、新仪器在城市测绘中的应用。%With the development of science and technology of surveying, lots of new technologies and new instruments come out. This paper introduces the following information--GPS network RTK technology, electronic level, 3D panoramic acquisition vehicle, digital city, Ground Penetrating Radar, 3D underground pipeline integrated management system, which are the forefront development of the science and technology.

  8. The internal consistency of perfect competition

    OpenAIRE

    Jakob Kapeller; Stephan Pühringer

    2010-01-01

    This article surveys some arguments brought forward in defense of the theory of perfect competition. While some critics propose that the theory of perfect competition, and thus also the theory of the firm, are logically flawed, (mainstream) economists defend their most popular textbook model by a series of apparently different arguments. Here it is examined whether these arguments are comparable, consistent and convincing from the point of view of philosophy of science.

  9. The Czech audit: internal consistency, latent structure and identification of risky alcohol consumption.

    Science.gov (United States)

    Sovinová, Hana; Csémy, Ladislav

    2010-09-01

    The primary aim of the study is to examine the psychometric properties and the structure of the Czech version of the Alcohol Use Disorders Identification Test (AUDIT), and to estimate the rate of risky, harmful and problematic alcohol consumers. Two large data sets were analyzed. The first was based on the application of the AUDIT as a part of a general population survey (N = 1.326; age range 18-64), the second represents data gathered by general practitioners (GPs) in the context of a pilot screening and brief advice (SBA) project in the area of Greater Prague (N = 2.589). Analyses of reliability showed satisfying internal consistency of the AUDIT (Cronbach's alpha = 0.83 for population survey and 0.77 for survey based on SBA). Principal component analyses suggest two factor solutions where one factor represents drinking patterns and the second alcohol-related problems or symptoms of dependence. The principal component analyses of both data sets led to similar factor formation. A total of 19% of the general population sample was classified as risky or harmful drinkers and 2% as problem drinkers. These figures were slightly lower in the sample of patients of general practitioners. The Czech version of the AUDIT seems to be a plausible screening instrument. The properties of the instrument suggest usefulness of the summary score for identification of the level of risk.

  10. Evaluation of an immunosuppressant side effect instrument.

    Science.gov (United States)

    Winsett, Rebecca P; Arheart, Kris; Stratta, Robert J; Alloway, Rita; Wicks, Mona N; Gaber, A Osama; Hathaway, Donna K

    2004-09-01

    Clinicians continue to be compelled to evaluate the impact of immunosuppressive medication side effects on the quality of life of transplant recipients. We Were asked to develop an instrument to measure side effects in immunosuppressed transplant recipients. To construct an instrument that measures the impact and severity of side effects of immunosuppressive medications used in transplantation and to assess the reliability and validity of the newly developed instrument called the Memphis Survey. The instrument was constructed by a panel of physicians, nurses, and pharmacists with experience in treating transplant recipients. A small group of kidney transplant recipients (n= 13) provided pilot data for refining and testing the instrument. A national sample of kidney, liver, and heart transplant recipients (n = 505) provided data that were used to further develop the instrument. Factor analysis was used to determine the psychological dimensions underlying the instrument and to guide the construction of scales from the survey items. The instrument scales were then computed from the dataset of 505 transplant recipients to quantify the impact of immunosuppressant side effects on the quality of life of transplant recipients. Analyses showed the final instrument scales to be valid and reliable. Exploratory analysis suggests the need for further testing of the instrument to determine gender differences.

  11. An Attitude Scale on Individual Instrument and Individual Instrument Course: Validity-Reliability Research

    Science.gov (United States)

    Kuçukosmanoglu, Hayrettin Onur

    2015-01-01

    The main purpose of this study is to develop a scale to determine students' attitude levels on individual instruments and individual instrument courses in instrument training, which is an important dimension of music education, and to conduct a validity-reliability research of the scale that has been developed. The scale consists of 16 items. The…

  12. An Attitude Scale on Individual Instrument and Individual Instrument Course: Validity-Reliability Research

    Science.gov (United States)

    Kuçukosmanoglu, Hayrettin Onur

    2015-01-01

    The main purpose of this study is to develop a scale to determine students' attitude levels on individual instruments and individual instrument courses in instrument training, which is an important dimension of music education, and to conduct a validity-reliability research of the scale that has been developed. The scale consists of 16 items. The…

  13. Psychometric Evaluation of a New Instrument to Evaluate School Nurses' Perceptions on Concussion Care Management.

    Science.gov (United States)

    Schneider, Kathleen H

    2017-10-01

    The rate of concussions in adolescents has risen over the last decade, resulting in cognitive and emotional problems. Neurologists recommend cognitive and physical rest during the recovery period, followed by a transitional return-to-classroom protocol. The purpose of the study was to develop and test an instrument that explores the beliefs and roles of school nurses in concussion care management. The instrument was a cross-sectional descriptive survey based on the theory of planned behavior, using Qualtrics®. The psychometric properties of the instrument were assessed through exploratory factor analysis with orthogonal rotation. The reliability of the instrument was assessed for internal consistency reliability using Cronbach's α. Kaiser-Meyer-Olkin for sample adequacy was .8; Cronbach's α strong (.851).

  14. Z-Spec: A broadband spectrometer for millimeter-wave astrophysics---Instrument development and results of a molecular line survey of nearby star-forming galaxy NGC 253

    Science.gov (United States)

    Earle, Lieko

    We have built Z-Spec, a broadband spectrometer for millimeter-wave astrophysics. The instrument's instantaneous bandwidth of 185-305 GHz covers the entire 1 millimeter atmospheric transmission window with a moderate resolving power ( R = n/Dn) of 250-350. The spectrometer employs a novel architecture called WaFIRS (Waveguide Far-Infrared Spectrometer) which confines the light propagation for a curved diffraction grating within a parallel-plate waveguide, resulting in a minimum mechanical envelope. An array of 160 silicon- nitride micromesh bolometers is cooled to 60 mK via an adiabatic demagnetization refrigerator (ADR) backed by a closed-cycle 3 He- 4 He sorption pump refrigerator. Z-Spec's compact design serves as a concept demonstration for a future far-infrared spectrometer aboard a cold telescope in space. Routine observations with Z-Spec from the Caltech Submillimeter Observatory on Mauna Kea have been conducted since April 2006, and the instrument currently achieves good sensitivities that are within a factor of two of the photon background limit set by the atmosphere and telescope. Z-Spec's primary science objectives are to determine the redshifts of faint submillimeter galaxies using the 12 CO rotational ladder, and to conduct systematic line surveys of local galaxies. The millimeter waveband hosts low- to mid- J rotational transitions for several molecular species which trace the dense interstellar gas associated with active star formation. Z-Spec's bandwidth offers a unique advantage over the traditional single-dish heterodyne approach: the spectral lines and the corresponding continua are all observed simultaneously, greatly reducing relative uncertainties in flux calibration and line-to-continuum ratios. The starburst galaxy NGC 253 was observed with Z-Spec in November 2006, for a total integration of 3.49 hours over two nights. NGC 253 is one of the brightest neighbors outside the Local Group of galaxies and its compact nuclear region is a site of

  15. Consistency of trace norm minimization

    CERN Document Server

    Bach, Francis

    2007-01-01

    Regularization by the sum of singular values, also referred to as the trace norm, is a popular technique for estimating low rank rectangular matrices. In this paper, we extend some of the consistency results of the Lasso to provide necessary and sufficient conditions for rank consistency of trace norm minimization with the square loss. We also provide an adaptive version that is rank consistent even when the necessary condition for the non adaptive version is not fulfilled.

  16. High SNR Consistent Compressive Sensing

    OpenAIRE

    Kallummil, Sreejith; Kalyani, Sheetal

    2017-01-01

    High signal to noise ratio (SNR) consistency of model selection criteria in linear regression models has attracted a lot of attention recently. However, most of the existing literature on high SNR consistency deals with model order selection. Further, the limited literature available on the high SNR consistency of subset selection procedures (SSPs) is applicable to linear regression with full rank measurement matrices only. Hence, the performance of SSPs used in underdetermined linear models ...

  17. Application of super total station instrument technology in the complex topographic survey%超站仪技术在复杂地形测量中的应用研究

    Institute of Scientific and Technical Information of China (English)

    李国明; 李国庆; 吕健; 吴晓萍

    2011-01-01

    In recent years, due to the rapid development of infrastructure and the conduct of the 5. 12 post-disaster reconstruction in China, topographic measurements increased significantly. However, as many of the construction area of the terrain is more complicated, for measurements made new demands, in addition to improving the conventional measurement methods, more efficient e-quipment are also needed to provide technical support. In this paper, taking Xianxugou 1:500 post-earthquake Geological Disaster Engineering Projects in Jiuzhaigou County of Sichuan Province for example, it introduced the principle of super total station in topographic measurement Combined with the construction area, it discussed the implementation methods, notes, measuring result' s repeatability and reproducibility and so on were analyzed. Finally, a method of measuring in complex terrain was taken. Super total station had more advantage than common measurement instruments in complex topographical surveys. This method would have a significant impact on other surveys.%由于很多施工区域的地形较为复杂,对测量工作提出了新的要求,除改进常规测量方法外,同时需要更高效的仪器提供技术保障.本文以震后四川省九寨沟县鲜浒沟地质灾害工程1:500地形测绘项目为例,介绍了超站仪在地形测量中的应用原理,结合施工区,讨论了其实施方法、注意事项、对测量成果的重复性、复现性等问题进行了分析,提出了复杂地形测量的新方法.实践证明,超站仪在复杂地形测量工作中较常规测量仪器有较大的优势.

  18. Evaluating musical instruments

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, D. Murray

    2014-04-01

    Scientific measurements of sound generation and radiation by musical instruments are surprisingly hard to correlate with the subtle and complex judgments of instrumental quality made by expert musicians.

  19. ACTRIS ACSM intercomparison - Part I: Reproducibility of concentration and fragment results from 13 individual Quadrupole Aerosol Chemical Speciation Monitors (Q-ACSM) and consistency with Time-of-Flight ACSM (ToF-ACSM), High Resolution ToF Aerosol Mass Spectrometer (HR-ToF-AMS) and other co-located instruments

    Science.gov (United States)

    Crenn, V.; Sciare, J.; Croteau, P. L.; Verlhac, S.; Fröhlich, R.; Belis, C. A.; Aas, W.; Äijälä, M.; Alastuey, A.; Artiñano, B.; Baisnée, D.; Bonnaire, N.; Bressi, M.; Canagaratna, M.; Canonaco, F.; Carbone, C.; Cavalli, F.; Coz, E.; Cubison, M. J.; Esser-Gietl, J. K.; Green, D. C.; Gros, V.; Heikkinen, L.; Herrmann, H.; Lunder, C.; Minguillón, M. C.; Močnik, G.; O'Dowd, C. D.; Ovadnevaite, J.; Petit, J.-E.; Petralia, E.; Poulain, L.; Priestman, M.; Riffault, V.; Ripoll, A.; Sarda-Estève, R.; Slowik, J. G.; Setyan, A.; Wiedensohler, A.; Baltensperger, U.; Prévôt, A. S. H.; Jayne, J. T.; Favez, O.

    2015-07-01

    As part of the European ACTRIS project, the first large Quadrupole Aerosol Chemical Speciation Monitor (Q-ACSM) intercomparison study was conducted in the region of Paris for three weeks during the late fall-early winter period (November-December 2013). The first week was dedicated to tuning and calibration of each instrument whereas the second and third were dedicated to side-by-side comparison in ambient conditions with co-located instruments providing independent information on submicron aerosol optical, physical and chemical properties. Near real-time measurements of the major chemical species (organic matter, sulfate, nitrate, ammonium and chloride) in the non-refractory submicron aerosols (NR-PM1) were obtained here from 13 Q-ACSM. The results show that these instruments can produce highly comparable and robust measurements of the NR-PM1 total mass and its major components. Taking the median of the 13 Q-ACSM as a reference for this study, strong correlations (r2 > 0.9) were observed systematically for each individual ACSM across all chemical families except for chloride for which three ACSMs showing weak correlations partly due to the very low concentrations during the study. Reproducibility expanded uncertainties of Q-ACSM concentration measurements were determined using appropriate methodologies defined by the International Standard Organization (ISO 17025) and were found to be of 9, 15, 19, 28 and 36 % for NR-PM1, nitrate, organic matter, sulfate and ammonium respectively. However, discrepancies were observed in the relative concentrations of the constituent mass fragments for each chemical component. In particular, significant differences were observed for the organic fragment at mass-to-charge ratio 44, which is a key parameter describing the oxidation state of organic aerosol. Following this first major intercomparison exercise of a large number of ACSMs, detailed intercomparison results are presented as well as a discussion of some recommendations

  20. Coordinating user interfaces for consistency

    CERN Document Server

    Nielsen, Jakob

    2001-01-01

    In the years since Jakob Nielsen's classic collection on interface consistency first appeared, much has changed, and much has stayed the same. On the one hand, there's been exponential growth in the opportunities for following or disregarding the principles of interface consistency-more computers, more applications, more users, and of course the vast expanse of the Web. On the other, there are the principles themselves, as persistent and as valuable as ever. In these contributed chapters, you'll find details on many methods for seeking and enforcing consistency, along with bottom-line analys

  1. Consistency of Random Survival Forests.

    Science.gov (United States)

    Ishwaran, Hemant; Kogalur, Udaya B

    2010-07-01

    We prove uniform consistency of Random Survival Forests (RSF), a newly introduced forest ensemble learner for analysis of right-censored survival data. Consistency is proven under general splitting rules, bootstrapping, and random selection of variables-that is, under true implementation of the methodology. Under this setting we show that the forest ensemble survival function converges uniformly to the true population survival function. To prove this result we make one key assumption regarding the feature space: we assume that all variables are factors. Doing so ensures that the feature space has finite cardinality and enables us to exploit counting process theory and the uniform consistency of the Kaplan-Meier survival function.

  2. Process Fairness and Dynamic Consistency

    NARCIS (Netherlands)

    S.T. Trautmann (Stefan); P.P. Wakker (Peter)

    2010-01-01

    textabstractAbstract: When process fairness deviates from outcome fairness, dynamic inconsistencies can arise as in nonexpected utility. Resolute choice (Machina) can restore dynamic consistency under nonexpected utility without using Strotz's precommitment. It can similarly justify dynamically

  3. Gravitation, Causality, and Quantum Consistency

    CERN Document Server

    Hertzberg, Mark P

    2016-01-01

    We examine the role of consistency with causality and quantum mechanics in determining the properties of gravitation. We begin by constructing two different classes of interacting theories of massless spin 2 particles -- gravitons. One involves coupling the graviton with the lowest number of derivatives to matter, the other involves coupling the graviton with higher derivatives to matter, making use of the linearized Riemann tensor. The first class requires an infinite tower of terms for consistency, which is known to lead uniquely to general relativity. The second class only requires a finite number of terms for consistency, which appears as a new class of theories of massless spin 2. We recap the causal consistency of general relativity and show how this fails in the second class for the special case of coupling to photons, exploiting related calculations in the literature. In an upcoming publication [1] this result is generalized to a much broader set of theories. Then, as a causal modification of general ...

  4. ZBLAN Viscosity Instrumentation

    Science.gov (United States)

    Kaukler, William

    2001-01-01

    The past year's contribution from Dr. Kaukler's experimental effort consists of these 5 parts: a) Construction and proof-of-concept testing of a novel shearing plate viscometer designed to produce small shear rates and operate at elevated temperatures; b) Preparing nonlinear polymeric materials to serve as standards of nonlinear Theological behavior; c) Measurements and evaluation of above materials for nonlinear rheometric behavior at room temperature using commercial spinning cone and plate viscometers available in the lab; d) Preparing specimens from various forms of pitch for quantitative comparative testing in a Dynamic Mechanical Analyzer, Thermal Mechanical Analyzer; and Archeological Analyzer; e) Arranging to have sets of pitch specimens tested using the various instruments listed above, from different manufacturers, to form a baseline of the viscosity variation with temperature using the different test modes offered by these instruments by compiling the data collected from the various test results. Our focus in this project is the shear thinning behavior of ZBLAN glass over a wide range of temperature. Experimentally, there are no standard techniques to perform such measurements on glasses, particularly at elevated temperatures. Literature reviews to date have shown that shear thinning in certain glasses appears to occur, but no data is available for ZBLAN glass. The best techniques to find shear thinning behavior require the application of very low rates of shear. In addition, because the onset of the thinning behavior occurs at an unknown elevated temperature, the instruments used in this study must provide controlled low rates of shear and do so for temperatures approaching 600 C. In this regard, a novel shearing parallel plate viscometer was designed and a prototype built and tested.

  5. IOT Overview: IR Instruments

    Science.gov (United States)

    Mason, E.

    In this instrument review chapter the calibration plans of ESO IR instruments are presented and briefly reviewed focusing, in particular, on the case of ISAAC, which has been the first IR instrument at VLT and whose calibration plan served as prototype for the coming instruments.

  6. The Next Generation Transit Survey (NGTS)

    Science.gov (United States)

    Wheatley, Peter J.; Pollacco, Don L.; Queloz, Didier; Rauer, Heike; Watson, Christopher A.; West, Richard G.; Chazelas, Bruno; Louden, Tom M.; Walker, Simon; Bannister, Nigel; Bento, Joao; Burleigh, Matthew; Cabrera, Juan; Eigmüller, Philipp; Erikson, Anders; Genolet, Ludovic; Goad, Michael; Grange, Andrew; Jordán, Andrés; Lawrie, Katherine; McCormac, James; Neveu, Marion

    2013-04-01

    The Next Generation Transit Survey (NGTS) is a new ground-based sky survey designed to find transiting Neptunes and super-Earths. By covering at least sixteen times the sky area of Kepler, we will find small planets around stars that are sufficiently bright for radial velocity confirmation, mass determination and atmospheric characterisation. The NGTS instrument will consist of an array of twelve independently pointed 20 cm telescopes fitted with red-sensitive CCD cameras. It will be constructed at the ESO Paranal Observatory, thereby benefiting from the very best photometric conditions as well as follow up synergy with the VLT and E-ELT. Our design has been verified through the operation of two prototype instruments, demonstrating white noise characteristics to sub-mmag photometric precision. Detailed simulations show that about thirty bright super-Earths and up to two hundred Neptunes could be discovered. Our science operations are due to begin in 2014.

  7. The Next Generation Transit Survey (NGTS

    Directory of Open Access Journals (Sweden)

    Goad Michael

    2013-04-01

    Full Text Available The Next Generation Transit Survey (NGTS is a new ground-based sky survey designed to find transiting Neptunes and super-Earths. By covering at least sixteen times the sky area of Kepler, we will find small planets around stars that are sufficiently bright for radial velocity confirmation, mass determination and atmospheric characterisation. The NGTS instrument will consist of an array of twelve independently pointed 20 cm telescopes fitted with red-sensitive CCD cameras. It will be constructed at the ESO Paranal Observatory, thereby benefiting from the very best photometric conditions as well as follow up synergy with the VLT and E-ELT. Our design has been verified through the operation of two prototype instruments, demonstrating white noise characteristics to sub-mmag photometric precision. Detailed simulations show that about thirty bright super-Earths and up to two hundred Neptunes could be discovered. Our science operations are due to begin in 2014.

  8. The Next Generation Transit Survey (NGTS)

    CERN Document Server

    Wheatley, Peter J; Queloz, Didier; Rauer, Heike; Watson, Christopher A; West, Richard G; Chazelas, Bruno; Louden, Tom M; Walker, Simon; Bannister, Nigel; Bento, Joao; Burleigh, Matthew; Cabrera, Juan; Eigmueller, Philipp; Erikson, Anders; Genolet, Ludovic; Goad, Michael; Grange, Andrew; Jordan, Andres; Lawrie, Katherine; McCormac, James; Neveu, Marion

    2013-01-01

    The Next Generation Transit Survey (NGTS) is a new ground-based sky survey designed to find transiting Neptunes and super-Earths. By covering at least sixteen times the sky area of Kepler we will find small planets around stars that are sufficiently bright for radial velocity confirmation, mass determination and atmospheric characterisation. The NGTS instrument will consist of an array of twelve independently pointed 20cm telescopes fitted with red-sensitive CCD cameras. It will be constructed at the ESO Paranal Observatory, thereby benefiting from the very best photometric conditions as well as follow up synergy with the VLT and E-ELT. Our design has been verified through the operation of two prototype instruments, demonstrating white noise characteristics to sub-mmag photometric precision. Detailed simulations show that about thirty bright super-Earths and up to two hundred Neptunes could be discovered. Our science operations are due to begin in 2014.

  9. Study on consistent query answering in inconsistent databases

    Institute of Scientific and Technical Information of China (English)

    XIE Dong; YANG Luming

    2007-01-01

    Consistent query answering is an approach to retrieving consistent answers over databases that might be inconsistent with respect to some given integrity constraints The approach is based on a concept of repair.This paper surveys several recent researches on obtaining consistent information from inconsistent databases,such as the underlying semantic model,a number of approaches to computing consistent query answers and the computational complexity of this problem.Furthermore,the work outlines potential research directions in this area.

  10. Status of the JWST Science Instrument Payload

    Science.gov (United States)

    Greenhouse, Matt

    2016-01-01

    The James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM) system consists of five sensors (4 science): Mid-Infrared Instrument (MIRI), Near Infrared Imager and Slitless Spectrograph (NIRISS), Fine Guidance Sensor (FGS), Near InfraRed Camera (NIRCam), Near InfraRed Spectrograph (NIRSpec); and nine instrument support systems: Optical metering structure system, Electrical Harness System; Harness Radiator System, ISIM Electronics Compartment, ISIM Remote Services Unit, Cryogenic Thermal Control System, Command and Data Handling System, Flight Software System, Operations Scripts System.

  11. Time-consistent and market-consistent evaluations

    NARCIS (Netherlands)

    Pelsser, A.; Stadje, M.A.

    2014-01-01

    We consider evaluation methods for payoffs with an inherent financial risk as encountered for instance for portfolios held by pension funds and insurance companies. Pricing such payoffs in a way consistent to market prices typically involves combining actuarial techniques with methods from mathemati

  12. Mapping the User Experience: Development of a Validated Instrument from the Plans and Scripts of the Computer Community of Practice

    Directory of Open Access Journals (Sweden)

    Pat Lehane

    2012-01-01

    Full Text Available A plethora of surveys for assessing computer use for usability or technology acceptance exist today. This article discusses the Systems Acceptance Indicator, a validated survey instrument for assessing the user experience from a cognitive–ergonomic perspective. The action research discussed in this paper utilized grounded theory analysis to establish the data-driven emergent theoretical constructs that provided the system acceptance categories (criteria for the survey. These data-driven emergent theoretical constructs were the basis for the proposed theoretical abstraction hierarchy of the survey criteria. Principle component analysis of the survey data produced an abstraction hierarchy identical to the theoretical model. This result confirmed the alignment of the human–computer interaction theoretical constructs with the data-driven emergent theory. The intent behind the human–computer interaction theoretical rationale for the emergent abstraction hierarchy was to provide a consistent and repeatable interpretation of the user response to the survey.

  13. Incontinence Symptom Index-Pediatric: development and initial validation of a urinary incontinence instrument for the older pediatric population.

    Science.gov (United States)

    Nelson, Caleb P; Park, John M; Bloom, David A; Wan, Julian; Dunn, Rodney L; Wei, John T

    2007-10-01

    Although urinary incontinence is common in children, no validated pediatric instruments exist for measuring urinary incontinence symptoms and bother. We developed and validated a patient reported pediatric survey for urinary incontinence measurement. The Incontinence Symptom Index-Pediatric is an 11-item instrument comprising 2 domains, that is 1) impairment and 2) symptom severity, including subdomains for stress urinary incontinence, urge urinary incontinence, insensate urinary incontinence, nocturnal urinary incontinence and pad use. The survey was self-administered twice, 2 weeks apart, to boys and girls ages 11 to 17 years. Children completed the survey independently. Cases consisted of patients presenting to pediatric urology clinic with the chief complaint of urinary incontinence. Controls consisted of healthy children presenting for evaluation up at a general pediatric practice. Formal validation analysis was performed. A total of 19 subjects per arm completed at least 1 survey. Internal consistency was good with a Cronbach's alpha of 0.84 for the complete instrument. Item-scale correlations were greater than 0.60 for all except 1 item. Test-retest reliability was also good (r = 0.97, p <0.0001). Discriminative validity was good with a total severity scale score of 9.3 in wet children and 0.7 in controls (p <0.0001). Impairment scale scores differed by 2.2 points (p <0.0001). Mean scores differed significantly between subscales for all domains except pad use. The most dramatic difference was in the urge urinary incontinence domain, which differed by a mean of 3.6 points (p = 0.0002). This pilot study provides initial validation of a survey instrument for urinary incontinence in children and adolescents. This instrument can be used in children ages 11 to 17 years to objectively and reproducibly measure patient reported urinary incontinence.

  14. Rate Gyroscopic Wellbore Survey System

    Institute of Scientific and Technical Information of China (English)

    Sheng Limin

    1997-01-01

    @@ The rate gyroscopic wellbore survey system as a new type of survey instruments adopts the inertial-grade rate gyro and quartz flexible accelerometers to compose a gyrocompassing system, transiting data to surface instrument by single core cable. The azimuth, inclination and tool-face angle can be computed from these data by surface computer.

  15. The ART-XC Instrument on Board the SRG Mission

    Science.gov (United States)

    Pavlinksy, M.; Akimov, V.; Levin, V.; Lapshov, I.; Tkachenko, A.; Semena, N.; Buntov, M.; Glushenko, A.; Arefiev, V.; Yaskovish, A.; Sunyaeve, R.; Churazov, E.; Sazonov, S.; Revnivtsev, M.; Lutovinov, A.; Molkov, S.; Kudelin, M.; Garanin, S.; Grigorovich, S.; Litvin, D.; Gubarev, M.; Ramsey, B.; Kilaru, K.; ODell, S. L.; Elsner, R.

    2012-01-01

    Spectrum Roentgen Gamma (SRG) is an X-ray astrophysical observatory, developed by Russia in collaboration with Germany. The mission will be launched in 2014 from Baikonur, by a Zenit rocket with a Fregat booster and placed in a 6-month-period halo orbit around L2. The scientific payload consists of two independent telescopes . a soft-x-ray survey instrument, eROSITA, being provided by Germany and a medium-x-ray-energy survey instrument ART-XC being developed by Russia. ART-XC will consist of seven independent, but co-aligned, telescope modules with seven corresponding cadmium-telluride focal plane detectors. Each will operate over the approximate energy range of 6- 30 keV, with an angular resolution of <1 ', a field of view of 30 ' and an energy resolution about 10% at 14 keV. The NASA Marshall Space Flight Center (MSFC) will fabricate some of the mirror modules, to complement others fabricated by VNIIEF in Russia.

  16. Market-consistent actuarial valuation

    CERN Document Server

    Wüthrich, Mario V

    2016-01-01

    This is the third edition of this well-received textbook, presenting powerful methods for measuring insurance liabilities and assets in a consistent way, with detailed mathematical frameworks that lead to market-consistent values for liabilities. Topics covered are stochastic discounting with deflators, valuation portfolio in life and non-life insurance, probability distortions, asset and liability management, financial risks, insurance technical risks, and solvency. Including updates on recent developments and regulatory changes under Solvency II, this new edition of Market-Consistent Actuarial Valuation also elaborates on different risk measures, providing a revised definition of solvency based on industry practice, and presents an adapted valuation framework which takes a dynamic view of non-life insurance reserving risk.

  17. Consistent Histories in Quantum Cosmology

    CERN Document Server

    Craig, David A; 10.1007/s10701-010-9422-6

    2010-01-01

    We illustrate the crucial role played by decoherence (consistency of quantum histories) in extracting consistent quantum probabilities for alternative histories in quantum cosmology. Specifically, within a Wheeler-DeWitt quantization of a flat Friedmann-Robertson-Walker cosmological model sourced with a free massless scalar field, we calculate the probability that the univese is singular in the sense that it assumes zero volume. Classical solutions of this model are a disjoint set of expanding and contracting singular branches. A naive assessment of the behavior of quantum states which are superpositions of expanding and contracting universes may suggest that a "quantum bounce" is possible i.e. that the wave function of the universe may remain peaked on a non-singular classical solution throughout its history. However, a more careful consistent histories analysis shows that for arbitrary states in the physical Hilbert space the probability of this Wheeler-DeWitt quantum universe encountering the big bang/crun...

  18. The Importance of being consistent

    CERN Document Server

    Wasserman, Adam; Jiang, Kaili; Kim, Min-Cheol; Sim, Eunji; Burke, Kieron

    2016-01-01

    We review the role of self-consistency in density functional theory. We apply a recent analysis to both Kohn-Sham and orbital-free DFT, as well as to Partition-DFT, which generalizes all aspects of standard DFT. In each case, the analysis distinguishes between errors in approximate functionals versus errors in the self-consistent density. This yields insights into the origins of many errors in DFT calculations, especially those often attributed to self-interaction or delocalization error. In many classes of problems, errors can be substantially reduced by using `better' densities. We review the history of these approaches, many of their applications, and give simple pedagogical examples.

  19. Consistent supersymmetric decoupling in cosmology

    NARCIS (Netherlands)

    Sousa Sánchez, Kepa

    2012-01-01

    The present work discusses several problems related to the stability of ground states with broken supersymmetry in supergravity, and to the existence and stability of cosmic strings in various supersymmetric models. In particular we study the necessary conditions to truncate consistently a sector o

  20. [Portable instrument for arteriosclerosis assessment].

    Science.gov (United States)

    Cao, Shuai; Chen, Xiang

    2014-01-01

    A portable instrument for arteriosclerosis assessment containing sensor module, acquisition board and embedded module was developed for home care in this paper. The sensor module consists of one ECG module and three pulse wave extraction modules, synchronously acquiring human ECG and pulse wave signal of carotid, radial, and dorsal, respectively. The acquisition board converts the sensor module's analog output signals into digital signals and transmits them to the embedded module. The embedded module realizes the functions including signal display, storage and the calculation and output of pulse wave velocity. The structure of the proposed portable instrument is simple, easy to use, and easy to expand. Small size, low cost, and low power consumption are also the advantages of this device. Experimental results demonstrated that the proposed portable instrument for arteriosclerosis assessment has high accuracy, good repeatability and can assess the degree of atherosclerosis appropriately.

  1. Graduate Assessment Survey Report.

    Science.gov (United States)

    Santa Fe Community Coll., Gainesville, FL. Office of Institutional Research and Planning.

    Determines the degree to which Santa Fe Community College (Florida) is providing quality educational programs and services to its students. Surveys outgoing students to gather their opinions and perceptions of the educational experiences and services they received while attending the college. The survey instrument is divided into three sections:…

  2. Consistence of Network Filtering Rules

    Institute of Scientific and Technical Information of China (English)

    SHE Kun; WU Yuancheng; HUANG Juncai; ZHOU Mingtian

    2004-01-01

    The inconsistence of firewall/VPN(Virtual Private Network) rule makes a huge maintainable cost.With development of Multinational Company,SOHO office,E-government the number of firewalls/VPN will increase rapidly.Rule table in stand-alone or network will be increased in geometric series accordingly.Checking the consistence of rule table manually is inadequate.A formal approach can define semantic consistence,make a theoretic foundation of intelligent management about rule tables.In this paper,a kind of formalization of host rules and network ones for auto rule-validation based on SET theory were proporsed and a rule validation scheme was defined.The analysis results show the superior performance of the methods and demonstrate its potential for the intelligent management based on rule tables.

  3. Self-consistent triaxial models

    CERN Document Server

    Sanders, Jason L

    2015-01-01

    We present self-consistent triaxial stellar systems that have analytic distribution functions (DFs) expressed in terms of the actions. These provide triaxial density profiles with cores or cusps at the centre. They are the first self-consistent triaxial models with analytic DFs suitable for modelling giant ellipticals and dark haloes. Specifically, we study triaxial models that reproduce the Hernquist profile from Williams & Evans (2015), as well as flattened isochrones of the form proposed by Binney (2014). We explore the kinematics and orbital structure of these models in some detail. The models typically become more radially anisotropic on moving outwards, have velocity ellipsoids aligned in Cartesian coordinates in the centre and aligned in spherical polar coordinates in the outer parts. In projection, the ellipticity of the isophotes and the position angle of the major axis of our models generally changes with radius. So, a natural application is to elliptical galaxies that exhibit isophote twisting....

  4. The Colorado Learning Attitudes about Science Survey (CLASS) for Use in Biology

    Science.gov (United States)

    Semsar, Katharine; Knight, Jennifer K.; Birol, Gulnur; Smith, Michelle K.

    2011-01-01

    This paper describes a newly adapted instrument for measuring novice-to-expert-like perceptions about biology: the Colorado Learning Attitudes about Science Survey for Biology (CLASS-Bio). Consisting of 31 Likert-scale statements, CLASS-Bio probes a range of perceptions that vary between experts and novices, including enjoyment of the discipline,…

  5. Assessment of the Measurement Properties of the NHCAHPS Family Survey: A Rasch Scaling Approach

    Science.gov (United States)

    O'Connor, Matthew S.

    2013-01-01

    The introduction of the Consumer Assessment of Healthcare Providers and Systems (CAHPS), a family of survey instruments designed to capture and report people's experiences obtaining health care could soon add satisfaction as a consistent dimension of quality that skilled nursing facilities (SNFs) are required to assess and report. The SNF setting…

  6. On Modal Refinement and Consistency

    DEFF Research Database (Denmark)

    Nyman, Ulrik; Larsen, Kim Guldstrand; Wasowski, Andrzej

    2007-01-01

    Almost 20 years after the original conception, we revisit several fundamental question about modal transition systems. First, we demonstrate the incompleteness of the standard modal refinement using a counterexample due to Hüttel. Deciding any refinement, complete with respect to the standard...... notions of implementation, is shown to be computationally hard (co-NP hard). Second, we consider four forms of consistency (existence of implementations) for modal specifications. We characterize each operationally, giving algorithms for deciding, and for synthesizing implementations, together...

  7. Tri-Sasakian consistent reduction

    CERN Document Server

    Cassani, Davide

    2011-01-01

    We establish a universal consistent Kaluza-Klein truncation of M-theory based on seven-dimensional tri-Sasakian structure. The four-dimensional truncated theory is an N=4 gauged supergravity with three vector multiplets and a non-abelian gauge group, containing the compact factor SO(3). Consistency follows from the fact that our truncation takes exactly the same form as a left-invariant reduction on a specific coset manifold, and we show that the same holds for the various universal consistent truncations recently put forward in the literature. We describe how the global symmetry group SL(2,R) x SO(6,3) is embedded in the symmetry group E7(7) of maximally supersymmetric reductions, and make the connection with the approach of Exceptional Generalized Geometry. Vacuum AdS4 solutions spontaneously break the amount of supersymmetry from N=4 to N=3,1 or 0, and the spectrum contains massive modes. We find a subtruncation to minimal N=3 gauged supergravity as well as an N=1 subtruncation to the SO(3)-invariant secto...

  8. Evaluating Temporal Consistency in Marine Biodiversity Hotspots.

    Science.gov (United States)

    Piacenza, Susan E; Thurman, Lindsey L; Barner, Allison K; Benkwitt, Cassandra E; Boersma, Kate S; Cerny-Chipman, Elizabeth B; Ingeman, Kurt E; Kindinger, Tye L; Lindsley, Amy J; Nelson, Jake; Reimer, Jessica N; Rowe, Jennifer C; Shen, Chenchen; Thompson, Kevin A; Heppell, Selina S

    2015-01-01

    With the ongoing crisis of biodiversity loss and limited resources for conservation, the concept of biodiversity hotspots has been useful in determining conservation priority areas. However, there has been limited research into how temporal variability in biodiversity may influence conservation area prioritization. To address this information gap, we present an approach to evaluate the temporal consistency of biodiversity hotspots in large marine ecosystems. Using a large scale, public monitoring dataset collected over an eight year period off the US Pacific Coast, we developed a methodological approach for avoiding biases associated with hotspot delineation. We aggregated benthic fish species data from research trawls and calculated mean hotspot thresholds for fish species richness and Shannon's diversity indices over the eight year dataset. We used a spatial frequency distribution method to assign hotspot designations to the grid cells annually. We found no areas containing consistently high biodiversity through the entire study period based on the mean thresholds, and no grid cell was designated as a hotspot for greater than 50% of the time-series. To test if our approach was sensitive to sampling effort and the geographic extent of the survey, we followed a similar routine for the northern region of the survey area. Our finding of low consistency in benthic fish biodiversity hotspots over time was upheld, regardless of biodiversity metric used, whether thresholds were calculated per year or across all years, or the spatial extent for which we calculated thresholds and identified hotspots. Our results suggest that static measures of benthic fish biodiversity off the US West Coast are insufficient for identification of hotspots and that long-term data are required to appropriately identify patterns of high temporal variability in biodiversity for these highly mobile taxa. Given that ecological communities are responding to a changing climate and other

  9. Survey of the Frequency Dependent Latitudinal Distribution of the Fast Magnetosonic Wave Mode from Van Allen Probes Electric and Magnetic Field Instrument and Integrated Science Waveform Receiver Plasma Wave Analysis

    Science.gov (United States)

    Boardsen, Scott A.; Hospodarsky, George B.; Kletzing, Craig A.; Engebretson, Mark J.; Pfaff, Robert F.; Wygant, John R.; Kurth, William S.; Averkamp, Terrance F.; Bounds, Scott R.; Green, Jim L.; hide

    2016-01-01

    We present a statistical survey of the latitudinal structure of the fast magnetosonic wave mode detected by the Van Allen Probes spanning the time interval of 21 September 2012 to 1 August 2014. We show that statistically, the latitudinal occurrence of the wave frequency (f) normalized by the local proton cyclotron frequency (f(sub cP)) has a distinct funnel-shaped appearance in latitude about the magnetic equator similar to that found in case studies. By comparing the observed E/B ratios with the model E/B ratio, using the observed plasma density and background magnetic field magnitude as input to the model E/B ratio, we show that this mode is consistent with the extra-ordinary (whistler) mode at wave normal angles (theta(sub k)) near 90 deg. Performing polarization analysis on synthetic waveforms composed from a superposition of extra-ordinary mode plane waves with theta(sub k) randomly chosen between 87 and 90 deg, we show that the uncertainty in the derived wave normal is substantially broadened, with a tail extending down to theta(sub k) of 60 deg, suggesting that another approach is necessary to estimate the true distribution of theta(sub k). We find that the histograms of the synthetically derived ellipticities and theta(sub k) are consistent with the observations of ellipticities and theta(sub k) derived using polarization analysis.We make estimates of the median equatorial theta(sub k) by comparing observed and model ray tracing frequency-dependent probability occurrence with latitude and give preliminary frequency dependent estimates of the equatorial theta(sub k) distribution around noon and 4 R(sub E), with the median of approximately 4 to 7 deg from 90 deg at f/f(sub cP) = 2 and dropping to approximately 0.5 deg from 90 deg at f/f(sub cP) = 30. The occurrence of waves in this mode peaks around noon near the equator at all radial distances, and we find that the overall intensity of these waves increases with AE*, similar to findings of other studies.

  10. Consistent mutational paths predict eukaryotic thermostability

    Directory of Open Access Journals (Sweden)

    van Noort Vera

    2013-01-01

    Full Text Available Abstract Background Proteomes of thermophilic prokaryotes have been instrumental in structural biology and successfully exploited in biotechnology, however many proteins required for eukaryotic cell function are absent from bacteria or archaea. With Chaetomium thermophilum, Thielavia terrestris and Thielavia heterothallica three genome sequences of thermophilic eukaryotes have been published. Results Studying the genomes and proteomes of these thermophilic fungi, we found common strategies of thermal adaptation across the different kingdoms of Life, including amino acid biases and a reduced genome size. A phylogenetics-guided comparison of thermophilic proteomes with those of other, mesophilic Sordariomycetes revealed consistent amino acid substitutions associated to thermophily that were also present in an independent lineage of thermophilic fungi. The most consistent pattern is the substitution of lysine by arginine, which we could find in almost all lineages but has not been extensively used in protein stability engineering. By exploiting mutational paths towards the thermophiles, we could predict particular amino acid residues in individual proteins that contribute to thermostability and validated some of them experimentally. By determining the three-dimensional structure of an exemplar protein from C. thermophilum (Arx1, we could also characterise the molecular consequences of some of these mutations. Conclusions The comparative analysis of these three genomes not only enhances our understanding of the evolution of thermophily, but also provides new ways to engineer protein stability.

  11. Instrument Modeling and Synthesis

    Science.gov (United States)

    Horner, Andrew B.; Beauchamp, James W.

    During the 1970s and 1980s, before synthesizers based on direct sampling of musical sounds became popular, replicating musical instruments using frequency modulation (FM) or wavetable synthesis was one of the “holy grails” of music synthesis. Synthesizers such as the Yamaha DX7 allowed users great flexibility in mixing and matching sounds, but were notoriously difficult to coerce into producing sounds like those of a given instrument. Instrument design wizards practiced the mysteries of FM instrument design.

  12. Performing the Super Instrument

    DEFF Research Database (Denmark)

    Kallionpaa, Maria

    2016-01-01

    The genre of contemporary classical music has seen significant innovation and research related to new super, hyper, and hybrid instruments, which opens up a vast palette of expressive potential. An increasing number of composers, performers, instrument designers, engineers, and computer programmers...... provides the performer extensive virtuoso capabilities in terms of instrumental range, harmony, timbre, or spatial, textural, acoustic, technical, or technological qualities. The discussion will be illustrated by a composition case study involving augmented musical instrument electromagnetic resonator...

  13. Performing the Super Instrument

    DEFF Research Database (Denmark)

    Kallionpaa, Maria

    2016-01-01

    provides the performer extensive virtuoso capabilities in terms of instrumental range, harmony, timbre, or spatial, textural, acoustic, technical, or technological qualities. The discussion will be illustrated by a composition case study involving augmented musical instrument electromagnetic resonator......The genre of contemporary classical music has seen significant innovation and research related to new super, hyper, and hybrid instruments, which opens up a vast palette of expressive potential. An increasing number of composers, performers, instrument designers, engineers, and computer programmers...

  14. Internal consistency reliability is a poor predictor of responsiveness

    Directory of Open Access Journals (Sweden)

    Heels-Ansdell Diane

    2005-05-01

    Full Text Available Abstract Background Whether responsiveness represents a measurement property of health-related quality of life (HRQL instruments that is distinct from reliability and validity is an issue of debate. We addressed the claims of a recent study, which suggested that investigators could rely on internal consistency to reflect instrument responsiveness. Methods 516 patients with chronic obstructive pulmonary disease or knee injury participating in four longitudinal studies completed generic and disease-specific HRQL questionnaires before and after an intervention that impacted on HRQL. We used Pearson correlation coefficients and linear regression to assess the relationship between internal consistency reliability (expressed as Cronbach's alpha, instrument type (generic and disease-specific and responsiveness (expressed as the standardised response mean, SRM. Results Mean Cronbach's alpha was 0.83 (SD 0.08 and mean SRM was 0.59 (SD 0.33. The correlation between Cronbach's alpha and SRMs was 0.10 (95% CI -0.12 to 0.32 across all studies. Cronbach's alpha alone did not explain variability in SRMs (p = 0.59, r2 = 0.01 whereas the type of instrument was a strong predictor of the SRM (p = 0.012, r2 = 0.37. In multivariable models applied to individual studies Cronbach's alpha consistently failed to predict SRMs (regression coefficients between -0.45 and 1.58, p-values between 0.15 and 0.98 whereas the type of instrument did predict SRMs (regression coefficients between -0.25 to -0.59, p-values between Conclusion Investigators must look to data other than internal consistency reliability to select a responsive instrument for use as an outcome in clinical trials.

  15. On the consistency of MPS

    CERN Document Server

    Souto-Iglesias, Antonio; González, Leo M; Cercos-Pita, Jose L

    2013-01-01

    The consistency of Moving Particle Semi-implicit (MPS) method in reproducing the gradient, divergence and Laplacian differential operators is discussed in the present paper. Its relation to the Smoothed Particle Hydrodynamics (SPH) method is rigorously established. The application of the MPS method to solve the Navier-Stokes equations using a fractional step approach is treated, unveiling inconsistency problems when solving the Poisson equation for the pressure. A new corrected MPS method incorporating boundary terms is proposed. Applications to one dimensional boundary value Dirichlet and mixed Neumann-Dirichlet problems and to two-dimensional free-surface flows are presented.

  16. Measuring process and knowledge consistency

    DEFF Research Database (Denmark)

    Edwards, Kasper; Jensen, Klaes Ladeby; Haug, Anders

    2007-01-01

    with a 5 point Liker scale and a corresponding scoring system. Process consistency is measured by using a first-person drawing tool with the respondent in the centre. Respondents sketch the sequence of steps and people they contact when configuring a product. The methodology is tested in one company...... for granted; rather the contrary, and attempting to implement a configuration system may easily ignite a political battle. This is because stakes are high in the sense that the rules and processes chosen may only reflect one part of the practice, ignoring a majority of the employees. To avoid this situation...

  17. Personality, Intelligence And Music Instrument

    OpenAIRE

    Mihajlovski, Zoran

    2013-01-01

    An empirical study examining differences in personality traits and general intellectual ability of academic musicians was conducted on Macedonian sample of musicians, consisted of four different groups of instrumentalists, taken from four instrumental sections, respectively: a) piano (55); strings: violin, viola, cello, double bass (103); woodwind: flute, oboe, clarinet, bassoon (72); brass: trumpet, trombone, French horn, saxophone (58). Sample includes three age-based groups of musicians: m...

  18. Aeroacoustics of Musical Instruments

    NARCIS (Netherlands)

    Fabre, B.; Gilbert, J.; Hirschberg, A.; Pelorson, X.

    2012-01-01

    We are interested in the quality of sound produced by musical instruments and their playability. In wind instruments, a hydrodynamic source of sound is coupled to an acoustic resonator. Linear acoustics can predict the pitch of an instrument. This can significantly reduce the trial-and-error process

  19. [Survey of analytical work done for drugs at the emergency and critical care centers equipped with high-performance instruments provided by the Ministry of Health and Welfare (at present: Ministry of Health, Labour and Welfare) in fiscal 1998].

    Science.gov (United States)

    Hori, Yasushi; Iseki, Ken; Suzuki, Koichiro; Namera, Akira; Fukumoto, Mariko; Fuke, Chiaki; Mori, Hiromi; Soma, Kazui

    2010-09-01

    A questionnaire was sent to 73 emergency and critical care centers where high-performance instruments for analyzing drugs and chemicals were provided by the Ministry of Health and Welfare (currently Ministry of Health, Labour and Welfare) in fiscal 1998. 52 centers (71.2%) responded to the questionnaire. Among these, the instruments have been in operation at 36 centers. This means that analytical work has been performed in at least 49.3% (36/73) of facilities with the instruments. A positive correlation was observed between the annual number of patients tested for drugs and chemicals and analytical work hours at the 36 facilities. The results indicated that 150 cases may be tested for drugs and chemicals in a year on the condition that 100 hours a month of analytical work are secured, and 200 or more cases may be tested if 200 hours a month are secured. As for the running costs required for the operation of the instruments, the instrument maintenance and repair cost was estimated at 2 million yen a year, and it was calculated that 100 cases could be handled with a maximum annual supply expense of 1 million yen and 150 cases could be handled with a maximum annual supply expense of 2 million yen. These results suggest that the instrument running cost would be fully covered at nationwide emergency and critical care centers if the additional 5,000 NHI points (1 point = 10 yen) for hospital admission, which is approved for advanced emergency and critical care centers, were applicable to all facilities. Among the 36 facilities, the implementation of analysis varied for each of the 15 toxic substances recommended for analysis by the Japanese Society for Clinical Toxicology. Further research will be necessary to investigate and assess the frequency of analysis requests and combination of simple qualitative and instrumental analyses for each of the 15 substances, in order to evaluate the approach to the 15 substances in analytical work.

  20. Implementation of graduate employability skills SJT instrument in Universiti Utara Malaysia

    Science.gov (United States)

    Zakaria, Mohd Hafiz; Yatim, Bidin; Ismail, Suzilah

    2014-12-01

    Assessing graduate employability skills before they enter the job market is very important because if they are lacking certain skills, improvement can be made through the process of training. In this study, a valid and reliable new instrument for measuring graduate employability skills using Situational Judgement Test (SJT) approach was implemented. The instrument consisted of 12 items representing five employability skills namely communication skill, professional ethics & morality, entrepreneurial skill, critical thinking in problem solving and personal quality. The purpose was to obtain a norm score for each of these skills. A survey was conducted using the SJT instrument on 1012 Universiti Utara Malaysia (UUM) local undergraduate final year students. The norm score was generated by employing BCA bootstrap technique. Scores guideline was created based on three levels (low, moderate and high). The outcomes indicated that the students possessed moderate level of communicationskill, entrepreneurial skill, critical thinking in problem solving and personal quality but has high professional ethics & morality.

  1. Big Surveys, Big Data Centres

    Science.gov (United States)

    Schade, D.

    2016-06-01

    Well-designed astronomical surveys are powerful and have consistently been keystones of scientific progress. The Byurakan Surveys using a Schmidt telescope with an objective prism produced a list of about 3000 UV-excess Markarian galaxies but these objects have stimulated an enormous amount of further study and appear in over 16,000 publications. The CFHT Legacy Surveys used a wide-field imager to cover thousands of square degrees and those surveys are mentioned in over 1100 publications since 2002. Both ground and space-based astronomy have been increasing their investments in survey work. Survey instrumentation strives toward fair samples and large sky coverage and therefore strives to produce massive datasets. Thus we are faced with the "big data" problem in astronomy. Survey datasets require specialized approaches to data management. Big data places additional challenging requirements for data management. If the term "big data" is defined as data collections that are too large to move then there are profound implications for the infrastructure that supports big data science. The current model of data centres is obsolete. In the era of big data the central problem is how to create architectures that effectively manage the relationship between data collections, networks, processing capabilities, and software, given the science requirements of the projects that need to be executed. A stand alone data silo cannot support big data science. I'll describe the current efforts of the Canadian community to deal with this situation and our successes and failures. I'll talk about how we are planning in the next decade to try to create a workable and adaptable solution to support big data science.

  2. Challenges in Cultivating EOSDIS User Survey Participation

    Science.gov (United States)

    Boquist, C. L.; Sofinowski, E. J.; Walter, S.

    2011-12-01

    Since 2004 NASA has surveyed users of its Earth Observing System Data and Information System (EOSDIS) to determine user satisfaction with its services. The surveys have been conducted by CFI Group under contract with the Federal Consulting Group, Executive Agent in government for the American Customer Satisfaction Index (ACSI). The purpose of these annual surveys is to help EOSDIS and the data centers assess current status and improve future services. The survey questions include demographic and experiential questions in addition to the ACSI and EOSDIS specific rating questions. In addition to customer satisfaction, analysis of each year's results has provided insight into the survey process. Although specific questions have been added, modified, or deleted to reflect changes to the EOSDIS system and processes, the model rating questions have remained the same to ensure consistency for evaluating cross year trends. Working with the CFI Group, we have refined the invitation and questions to increase clarity and address the different ways diverse groups of users access services at EOSDIS data centers. We present challenges in preparing a single set of questions that go to users with backgrounds in many Earth science disciplines. These users may have contacted any of the 12 EOSDIS data centers for information or may have accessed data or data products from many kinds of aircraft and satellite instruments. We discuss lessons learned in preparing the invitation and survey questions and the steps taken to make the survey easier to complete and to encourage increased participation.

  3. Maintaining consistency in distributed systems

    Science.gov (United States)

    Birman, Kenneth P.

    1991-01-01

    In systems designed as assemblies of independently developed components, concurrent access to data or data structures normally arises within individual programs, and is controlled using mutual exclusion constructs, such as semaphores and monitors. Where data is persistent and/or sets of operation are related to one another, transactions or linearizability may be more appropriate. Systems that incorporate cooperative styles of distributed execution often replicate or distribute data within groups of components. In these cases, group oriented consistency properties must be maintained, and tools based on the virtual synchrony execution model greatly simplify the task confronting an application developer. All three styles of distributed computing are likely to be seen in future systems - often, within the same application. This leads us to propose an integrated approach that permits applications that use virtual synchrony with concurrent objects that respect a linearizability constraint, and vice versa. Transactional subsystems are treated as a special case of linearizability.

  4. Development and psychometric testing of an instrument to measure safety climate perceptions in community pharmacy.

    Science.gov (United States)

    Newham, Rosemary; Bennie, Marion; Maxwell, David; Watson, Anne; de Wet, Carl; Bowie, Paul

    2014-12-01

    A positive and strong safety culture underpins effective learning from patient safety incidents in health care, including the community pharmacy (CP) setting. To build this culture, perceptions of safety climate must be measured with context-specific and reliable instruments. No pre-existing instruments were specifically designed or suitable for CP within Scotland. We therefore aimed to develop a psychometrically sound instrument to measure perceptions of safety climate within Scottish CPs. The first stage, development of a preliminary instrument, comprised three steps: (i) a literature review; (ii) focus group feedback; and (iii) content validation. The second stage, psychometric testing, consisted of three further steps: (iv) a pilot survey; (v) a survey of all CP staff within a single health board in NHS Scotland; and (vi) application of statistical methods, including principal components analysis and calculation of Cronbach's reliability coefficients, to derive the final instrument. The preliminary questionnaire was developed through a process of literature review and feedback. This questionnaire was completed by staff in 50 CPs from the 131 (38%) sampled. 250 completed questionnaires were suitable for analysis. Psychometric evaluation resulted in a 30-item instrument with five positively correlated safety climate factors: leadership, teamwork, safety systems, communication and working conditions. Reliability coefficients were satisfactory for the safety climate factors (α > 0.7) and overall (α = 0.93). The robust nature of the technical design and testing process has resulted in the development of an instrument with sufficient psychometric properties, which can be implemented in the community pharmacy setting in NHS Scotland. © 2014 John Wiley & Sons, Ltd.

  5. Public surveys at ESO

    Science.gov (United States)

    Arnaboldi, Magda; Delmotte, Nausicaa; Hilker, Michael; Hussain, Gaitee; Mascetti, Laura; Micol, Alberto; Petr-Gotzens, Monika; Rejkuba, Marina; Retzlaff, Jörg; Mieske, Steffen; Szeifert, Thomas; Ivison, Rob; Leibundgut, Bruno; Romaniello, Martino

    2016-07-01

    ESO has a strong mandate to survey the Southern Sky. In this article, we describe the ESO telescopes and instruments that are currently used for ESO Public Surveys, and the future plans of the community with the new wide-field-spectroscopic instruments. We summarize the ESO policies governing the management of these projects on behalf of the community. The on-going ESO Public Surveys and their science goals, their status of completion, and the new projects selected during the second ESO VISTA call in 2015/2016 are discussed. We then present the impact of these projects in terms of current numbers of refereed publications and the scientific data products published through the ESO Science Archive Facility by the survey teams, including the independent access and scientific use of the published survey data products by the astronomical community.

  6. Decentralized Consistent Updates in SDN

    KAUST Repository

    Nguyen, Thanh Dang

    2017-04-10

    We present ez-Segway, a decentralized mechanism to consistently and quickly update the network state while preventing forwarding anomalies (loops and blackholes) and avoiding link congestion. In our design, the centralized SDN controller only pre-computes information needed by the switches during the update execution. This information is distributed to the switches, which use partial knowledge and direct message passing to efficiently realize the update. This separation of concerns has the key benefit of improving update performance as the communication and computation bottlenecks at the controller are removed. Our evaluations via network emulations and large-scale simulations demonstrate the efficiency of ez-Segway, which compared to a centralized approach, improves network update times by up to 45% and 57% at the median and the 99th percentile, respectively. A deployment of a system prototype in a real OpenFlow switch and an implementation in P4 demonstrate the feasibility and low overhead of implementing simple network update functionality within switches.

  7. The Consistent Vehicle Routing Problem

    Energy Technology Data Exchange (ETDEWEB)

    Groer, Christopher S [ORNL; Golden, Bruce [University of Maryland; Edward, Wasil [American University

    2009-01-01

    In the small package shipping industry (as in other industries), companies try to differentiate themselves by providing high levels of customer service. This can be accomplished in several ways, including online tracking of packages, ensuring on-time delivery, and offering residential pickups. Some companies want their drivers to develop relationships with customers on a route and have the same drivers visit the same customers at roughly the same time on each day that the customers need service. These service requirements, together with traditional constraints on vehicle capacity and route length, define a variant of the classical capacitated vehicle routing problem, which we call the consistent VRP (ConVRP). In this paper, we formulate the problem as a mixed-integer program and develop an algorithm to solve the ConVRP that is based on the record-to-record travel algorithm. We compare the performance of our algorithm to the optimal mixed-integer program solutions for a set of small problems and then apply our algorithm to five simulated data sets with 1,000 customers and a real-world data set with more than 3,700 customers. We provide a technique for generating ConVRP benchmark problems from vehicle routing problem instances given in the literature and provide our solutions to these instances. The solutions produced by our algorithm on all problems do a very good job of meeting customer service objectives with routes that have a low total travel time.

  8. Halo vest instrumentation

    Science.gov (United States)

    Huston, Dryver R.; Krag, Martin

    1996-05-01

    The halo vest is a head and neck immobilization system that is often used on patients that are recovering from cervical trauma or surgery. The halo vest system consists of a rigid halo that is firmly attached to the skull, an upright support structure for stabilization and immobilization, and a torso-enveloping vest. The main purpose of this study was to measure the forces that are carried by the halo-vest structure as the subject undergoes various activities of daily living and external loading for different vest designs. A tethered strain gage load cell based instrumentation system was used to take these load measurements on ten different subjects. Three different halo-vest systems were evaluated. The primary difference between the vests was the amount of torso coverage and the use of shoulder straps. The loads were measured, analyzed and used to compare the vests and to create a model of halo-vest-neck mechanics. Future applications of this technology to standalone data logging, pin-load measuring and biofeedback applications are discussed.

  9. EAST OJAI SURVEY, VENTURA COUNTY, USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Field Survey for East Ojai FIS mostly consists of hydraulic structures survey as well as geological and geomorphologic surveys. No topographic surveys are rendered...

  10. GIPP: Geophysical Instrument Pool Potsdam

    Directory of Open Access Journals (Sweden)

    Christian Haberland

    2016-04-01

    Full Text Available The Geophysical Instrument Pool Potsdam (GIPP consists of field instruments, sensors and equipment for temporary seismological studies (both controlled source and earthquake seismology as well as for magnetotelluric (electromagnetic experiments. These instruments are mainly mobile digital recorders, broadband seis­mometers and short period sensors, and they are used to reveal the subsurface structure and to investigate earth­quakes. Sensors for magnetotellurics include induction coil and fluxgate magnetometers and non-polarizing silver / silver-chloride electrodes. It is operated by the Helmholtz Centre Potsdam GFZ German Research Centre for Geosciences. The instru­ment facility is open to all academic applicants, both national and international. Instrument applications are evalu­ated and ranked by an external steering board. Currently, for seismological applications >850 geophysical recorders, >170 broadband seis­mo­meters and >1300 short period geophones are available (among others. Available for magnetotelluric experiments are > 50 real-time data-loggers, >150 induction coils, and >500 electrodes. User guidelines and data policy are in force and data archives are provided (standard exchange formats.

  11. Marine chemistry, fish / shell-fish surveys, benthic organisms, and marine toxic substances and pollutants data from current meter and other instruments in the Gulf of Mexico from 26 January 1993 to 13 June 1994 (NODC Accession 9500088)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine chemistry, fish / shell-fish surveys, benthic organisms, and marine toxic substances and pollutants data were collected using current meter and other...

  12. VIRUS instrument enclosures

    Science.gov (United States)

    Prochaska, T.; Allen, R.; Mondrik, N.; Rheault, J. P.; Sauseda, M.; Boster, E.; James, M.; Rodriguez-Patino, M.; Torres, G.; Ham, J.; Cook, E.; Baker, D.; DePoy, Darren L.; Marshall, Jennifer L.; Hill, G. J.; Perry, D.; Savage, R. D.; Good, J. M.; Vattiat, Brian L.

    2014-08-01

    The Visible Integral-Field Replicable Unit Spectrograph (VIRUS) instrument will be installed at the Hobby-Eberly Telescope† in the near future. The instrument will be housed in two enclosures that are mounted adjacent to the telescope, via the VIRUS Support Structure (VSS). We have designed the enclosures to support and protect the instrument, to enable servicing of the instrument, and to cool the instrument appropriately while not adversely affecting the dome environment. The system uses simple HVAC air handling techniques in conjunction with thermoelectric and standard glycol heat exchangers to provide efficient heat removal. The enclosures also provide power and data transfer to and from each VIRUS unit, liquid nitrogen cooling to the detectors, and environmental monitoring of the instrument and dome environments. In this paper, we describe the design and fabrication of the VIRUS enclosures and their subsystems.

  13. Gemini Instrument Upgrade Program

    Science.gov (United States)

    Diaz, Ruben; Goodsell, Stephen; Kleinman, Scot

    2016-08-01

    The Gemini Observatory* remains committed to keeping its operational instrumentation competitive and serving the needs of its user community. Currently the observatory operates a 4 instruments + 1 AO system at each site. At Gemini North the GMOS-N, GNIRS, NIFS and NIRI instruments are offered supported by the ALTAIR AO system. In the south, GMOS-S, F-2, GPI and GSAOI are offered instrumentation and GeMS is the provided AO System. This paper reviews our strategy to keep our instrumentation suite competitive, examines both our current funded upgrade projects and our potential future enhancements. We summarize the work done and the results so far obtained within the instrument upgrade program.

  14. Instrumentation a reader

    CERN Document Server

    Pope, P

    1990-01-01

    This book contains a selection of papers and articles in instrumentation previously pub­ lished in technical periodicals and journals of learned societies. Our selection has been made to illustrate aspects of current practice and applications of instrumentation. The book does not attempt to be encyclopaedic in its coverage of the subject, but to provide some examples of general transduction techniques, of the sensing of particular measurands, of components of instrumentation systems and of instrumentation practice in two very different environments, the food industry and the nuclear power industry. We have made the selection particularly to provide papers appropriate to the study of the Open University course T292 Instrumentation. The papers have been chosen so that the book covers a wide spectrum of instrumentation techniques. Because of this, the book should be of value not only to students of instrumen­ tation, but also to practising engineers and scientists wishing to glean ideas from areas of instrumen...

  15. Towards an Enterprise Architecture Benefits Measurement Instrument

    NARCIS (Netherlands)

    Plessius, Henk; Steenbergen, van Marlies; Slot, Raymond

    2015-01-01

    Author supplied: Based on the Enterprise Architecture Value Framework (EAVF) - a generic framework to classify benefits of Enterprise Architecture (EA) - a measurement instrument for EA benefits has been developed and tested in a survey with 287 respondents. In this paper we present the results of

  16. Locating Tests and Measurement Instruments for Assessment

    Science.gov (United States)

    Mastel, Kristen; Morris-Knower, Jim; Marsalis, Scott

    2016-01-01

    Extension educators, staff, and specialists need to use surveys and other measurement instruments to assess their programming and conduct other research. Challenges in locating tests and measurement tools, however, include lack of time and lack of familiarity with techniques that can be used to find them. This article discusses library resources…

  17. Consistency between GRUAN sondes, LBLRTM and IASI

    Directory of Open Access Journals (Sweden)

    X. Calbet

    2017-06-01

    Full Text Available Radiosonde soundings from the GCOS Reference Upper-Air Network (GRUAN data record are shown to be consistent with Infrared Atmospheric Sounding Instrument (IASI-measured radiances via LBLRTM (Line-By-Line Radiative Transfer Model in the part of the spectrum that is mostly affected by water vapour absorption in the upper troposphere (from 700 hPa up. This result is key for climate data records, since GRUAN, IASI and LBLRTM constitute reference measurements or a reference radiative transfer model in each of their fields. This is specially the case for night-time radiosonde measurements. Although the sample size is small (16 cases, daytime GRUAN radiosonde measurements seem to have a small dry bias of 2.5 % in absolute terms of relative humidity, located mainly in the upper troposphere, with respect to LBLRTM and IASI. Full metrological closure is not yet possible and will not be until collocation uncertainties are better characterized and a full uncertainty covariance matrix is clarified for GRUAN.

  18. Aircrew Screening Instruments Review

    Science.gov (United States)

    2007-09-01

    available tools . Several vendors indicated that they will have new selection instruments available within a few months. These are not listed. As noted...AFCAPS-FR-2011-0012 AIRCREW SCREENING INSTRUMENTS REVIEW Diane L. Damos Damos Aviation Services, Inc...June 2007 – August 2007 4. TITLE AND SUBTITLE Aircrew Screening Instruments Review 5a. CONTRACT NUMBER FA3089-06-F-0385 5b. GRANT NUMBER 5c

  19. 2F Evaporator CP class instrumentation uncertainties evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, E.

    1994-01-28

    There are two instrumentation systems in the 2F Evaporator facilities (bldg. 242-16F) that are classified as the Critical Protection (CP). They are the Evaporator Pot Temperature instrumentations and Steam Condensate Gamma Monitor. The pot instrumentation consists of two interrelated circuits sharing the same temperature sensor and transducer. They are the high alarm and interlock circuit and the recorder circuit. The gamma monitor instrumentation consists of four interrelated circuits sharing the same scintillation detector. They are the gamma alarm and interlock circuit, failure alarm and interlock circuit, condensate cesium activity recorder circuit, and condensate americium activity recorder circuit. The resulting uncertainties for the instrument circuits are tabulated. (GHH)

  20. [Controlling instruments in radiology].

    Science.gov (United States)

    Maurer, M

    2013-10-01

    Due to the rising costs and competitive pressures radiological clinics and practices are now facing, controlling instruments are gaining importance in the optimization of structures and processes of the various diagnostic examinations and interventional procedures. It will be shown how the use of selected controlling instruments can secure and improve the performance of radiological facilities. A definition of the concept of controlling will be provided. It will be shown which controlling instruments can be applied in radiological departments and practices. As an example, two of the controlling instruments, material cost analysis and benchmarking, will be illustrated.

  1. Ocean Optics Instrumentation Systems

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides instrumentation suites for a wide variety of measurements to characterize the ocean’s optical environment. These packages have been developed to...

  2. Networked Instrumentation Element

    Data.gov (United States)

    National Aeronautics and Space Administration — Armstrong researchers have developed a networked instrumentation system that connects modern experimental payloads to existing analog and digital communications...

  3. Satellite oceanography - The instruments

    Science.gov (United States)

    Stewart, R. H.

    1981-01-01

    It is pointed out that no instrument is sensitive to only one oceanographic variable; rather, each responds to a combination of atmospheric and oceanic phenomena. This complicates data interpretation and usually requires that a number of observations, each sensitive to somewhat different phenomena, be combined to provide unambiguous information. The distinction between active and passive instruments is described. A block diagram illustrating the steps necessary to convert data from satellite instruments into oceanographic information is included, as is a diagram illustrating the operation of a radio-frequency radiometer. Attention is also given to the satellites that carry the various oceanographic instruments.

  4. PEP Laser Surveying System

    Energy Technology Data Exchange (ETDEWEB)

    Lauritzen, T.; Sah, R.C.

    1979-03-01

    A Laser Surveying System has been developed to survey the beam elements of the PEP storage ring. This system provides automatic data acquisition and analysis in order to increase survey speed and to minimize operator error. Two special instruments, the Automatic Readout Micrometer and the Small Automatic Micrometer, have been built for measuring the locations of fiducial points on beam elements with respect to the light beam from a laser. These instruments automatically encode offset distances and read them into the memory of an on-line computer. Distances along the beam line are automatically encoded with a third instrument, the Automatic Readout Tape Unit. When measurements of several beam elements have been taken, the on-line computer analyzes the measured data, compared them with desired parameters, and calculates the required adjustments to beam element support stands.

  5. Endotoxins in surgical instruments of hip arthroplasty

    Directory of Open Access Journals (Sweden)

    Vania Regina Goveia

    2016-06-01

    Full Text Available Abstract OBJECTIVE To investigate endotoxins in sterilized surgical instruments used in hip arthroplasties. METHOD A descriptive exploratory study conducted in a public teaching hospital. Six types of surgical instruments were selected, namely: acetabulum rasp, femoral rasp, femoral head remover, chisel box, flexible bone reamer and femoral head test. The selection was based on the analysis of the difficulty in removing bone and blood residues during cleaning. The sample was made up of 60 surgical instruments, which were tested for endotoxins in three different stages. The EndosafeTM Gel-Clot LAL (Limulus Amebocyte Lysate method was used. RESULT There was consistent gel formation with positive analysis in eight instruments, corresponding to 13.3%, being four femoral rasps and four bone reamers. CONCLUSION Endotoxins in quantity ≥0.125 UE/mL were detected in 13.3% of the instruments tested.

  6. Health-related quality of life-testing the reliability of the MSQOL-54 instrument among MS patients.

    Science.gov (United States)

    Heiskanen, Satu; Meriläinen, Pirkko; Pietilä, Anna-Maija

    2007-06-01

    The purpose of the study was to assess the reliability of the specific multiple sclerosis quality of life (MSQOL-54) instrument, which contains 54 items measuring quality of life, among Finnish multiple sclerosis (MS) patients. Nursing professionals evaluated the clarity and comprehensibility of the translated instrument, after which it was pilot-tested. The data were collected through a questionnaire survey in the spring 2004. Persons diagnosed with MS in 1999-2001 filled in the questionnaire (n = 100). The response percentage was 81%. The structural validity of the MSQOL-54 instrument was evaluated with factor analysis and the generic 15D quality of life instrument. The internal consistency of the instrument was measured with Cronbach's alpha, correlations and item analysis. According to the results, the structural validity of MSQOL-54 was good, and factor analysis yielded a clear-cut factorial model. More than half of the correlations between the comparable items of the 15D and MSQOL-54 instruments were moderate or better. The internal consistency of MSQOL-54 can hence be considered quite good: Cronbach's alpha coefficients calculated for the factors and their items ranged within 0.33-0.89. The alpha coefficient calculated for the whole instrument was 0.84. The internal consistency of MSQOL-54 was further confirmed by the results of an item analysis, which showed the correlation coefficients between the items of the different dimensions to be good (0.31-0.81). On the basis of the test results, the MSQOL-54 instrument is fairly reliable and suitable for assessing the health-related quality of life of MS patients. The reliability of MSQOL-54 should be evaluated further by a longitudinal study design in the future.

  7. Instrumentation Design and Development Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — RTTC has facilities for design, development and fabrication of: custominstrumentation, mobile instrumentation, miniaturized instrumentation, wirelessinstrumentation,...

  8. Background instrumental music and serial recall.

    Science.gov (United States)

    Nittono, H

    1997-06-01

    Although speech and vocal music are consistently shown to impair serial recall for visually presented items, instrumental music does not always produce a significant disruption. This study investigated the features of instrumental music that would modulate the disruption in serial recall. 24 students were presented sequences of nine digits and required to recall the digits in order of presentation. Instrumental music as played either forward or backward during the task. Forward music caused significantly more disruption than did silence, whereas the reversed music did not. Some higher-order factor may be at work in the effect of background music on serial recall.

  9. BAA instrument no. 93

    Science.gov (United States)

    Marriott, R. A.

    2006-12-01

    Instrument no. 93 has been in almost continual use for more than a hundred years. Since it left the workshop of its maker, George Calver, it has kept company with several other notable instruments and has been used by many eminent astronomers. It was added to the Association's collection in 1945.

  10. Instrumentation in endourology

    OpenAIRE

    Khanna, Rakesh; Monga,Manoj

    2011-01-01

    Success with endourological procedures requires expertise and instrumentation. This review focuses on the instrumentation required for ureteroscopy and percutaneous nephrolithotomy, and provides a critical assessment of in vitro and clinical studies that have evaluated the comparative effectiveness of these medical devices.

  11. Intraoral Pressure in Ethnic Wind Instruments

    CERN Document Server

    Goss, Clinton F

    2013-01-01

    High intraoral pressure generated when playing some wind instruments has been linked to a variety of health issues. Prior research has focused on Western classical instruments, but no work has been published on ethnic wind instruments. This study measured intraoral pressure when playing six classes of ethnic wind instruments (N = 149): Native American flutes (n = 71) and smaller samples of ethnic duct flutes, reed instruments, reedpipes, overtone whistles, and overtone flutes. Results are presented in the context of a survey of prior studies, providing a composite view of the intraoral pressure requirements of a broad range of wind instruments. Mean intraoral pressure was 8.37 mBar across all ethnic wind instruments and 5.21 +/- 2.16 mBar for Native American flutes. The range of pressure in Native American flutes closely matches pressure reported in other studies for normal speech, and the maximum intraoral pressure, 20.55 mBar, is below the highest subglottal pressure reported in other studies during singing...

  12. INSTRUMENTATION FOR ENVIRONMENTAL MONITORING--Radiation--Vol3Pt1

    Energy Technology Data Exchange (ETDEWEB)

    Authors, Various

    1972-01-02

    A comprehensive survey of instrumentation for environmental monitoring is being carried out by the Lawrence Berkeley Laboratory originally under a grant from the National Science Foundation and now by the Office of Health and Environmental Research of the Department of Energy. Instruments being investigated are those useful for measurements in Air Quality, Water Quality, Radiation, and Biomedicine related to environmental research and monitoring. Consideration is given to instruments and techniques presently in use and to those developed for other purposes but having possible applications to this work. The results of the survey are given as (a) descriptions of the physical and operating characteristics of available instruments, (b) critical comparisons among instrumentation methods, and (c) recommendations of promising methodology and development of new instrumentation. Information is also given regarding the pollutants to be monitored: their characteristics and forms, their sources and pathways, their effects on the ecosystem, and the means of controlling them through process and regulatory controls.

  13. Human factors aspects of advanced instrumentation in the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.

    1989-01-01

    An important consideration in regards to the use of advanced instrumentation in the nuclear industry is the interface between the instrumentation system and the human. A survey, oriented towards identifying the human factors aspects of digital instrumentation, was conducted at a number of United States (US) and Canadian nuclear vendors and utilities. Human factors issues, subsumed under the categories of computer-generated displays, controls, organizational support, training, and related topics were identified. 20 refs., 2 tabs.

  14. Robust Instrumentation[Water treatment for power plant]; Robust Instrumentering

    Energy Technology Data Exchange (ETDEWEB)

    Wik, Anders [Vattenfall Utveckling AB, Stockholm (Sweden)

    2003-08-01

    Cementa Slite Power Station is a heat recovery steam generator (HRSG) with moderate steam data; 3.0 MPa and 420 deg C. The heat is recovered from Cementa, a cement industry, without any usage of auxiliary fuel. The Power station commenced operation in 2001. The layout of the plant is unusual, there are no similar in Sweden and very few world-wide, so the operational experiences are limited. In connection with the commissioning of the power plant a R and D project was identified with the objective to minimise the manpower needed for chemistry management of the plant. The lean chemistry management is based on robust instrumentation and chemical-free water treatment plant. The concept with robust instrumentation consists of the following components; choice of on-line instrumentation with a minimum of O and M and a chemical-free water treatment. The parameters are specific conductivity, cation conductivity, oxygen and pH. In addition to that, two fairly new on-line instruments were included; corrosion monitors and differential pH calculated from specific and cation conductivity. The chemical-free water treatment plant consists of softening, reverse osmosis and electro-deionisation. The operational experience shows that the cycle chemistry is not within the guidelines due to major problems with the operation of the power plant. These problems have made it impossible to reach steady state and thereby not viable to fully verify and validate the concept with robust instrumentation. From readings on the panel of the online analysers some conclusions may be drawn, e.g. the differential pH measurements have fulfilled the expectations. The other on-line analysers have been working satisfactorily apart from contamination with turbine oil, which has been noticed at least twice. The corrosion monitors seem to be working but the lack of trend curves from the mainframe computer system makes it hard to draw any clear conclusions. The chemical-free water treatment has met all

  15. Measuring attitude towards Buddhism and Sikhism : internal consistency reliability for two new instruments

    OpenAIRE

    Thanissaro, Phra Nicholas

    2011-01-01

    This paper describes and discusses the development and empirical properties of two new\\ud 24-item scales – one measuring attitude toward Buddhism and the other measuring attitude\\ud toward Sikhism. The scale is designed to facilitate inter-faith comparisons within the\\ud psychology of religion alongside the well-established Francis Scale of Attitude toward\\ud Christianity. Data were obtained from a multi-religious sample of 369 school pupils aged\\ud between 13 and 15 in London. Application of...

  16. LUPIN, a new instrument for pulsed neutron fields

    Science.gov (United States)

    Caresana, M.; Ferrarini, M.; Manessi, G. P.; Silari, M.; Varoli, V.

    2013-06-01

    A number of studies focused in the last decades on the development of survey meters to be used in pulsed radiation fields. This is a topic attracting widespread interest for applications such as radiation protection and beam diagnostics in accelerators. This paper describes a new instrument specifically conceived for applications in pulsed neutron fields (PNF). The detector, called LUPIN, is a rem counter type instrument consisting of a 3He proportional counter placed inside a spherical moderator. It works in current mode with a front-end electronics consisting of a current-voltage logarithmic amplifier, whose output signal is acquired with an ADC and processed on a PC. This alternative signal processing allows the instrument to be used in PNF without being affected by saturation effects. Moreover, it has a measurement capability ranging over many orders of burst intensity. Despite the fact that it works in current mode, it can measure a single neutron interaction. The LUPIN was first calibrated in CERN's calibration laboratory with a PuBe source. Measurements were carried out under various experimental conditions at the Helmholtz-Zentrum in Berlin, in the stray field at various locations of the CERN Proton Synchrotron complex and around a radiotherapy linear accelerator at the S. Raffaele hospital in Milan. The detector can withstand single bursts with values of H*(10) up to 16 nSv/burst without showing any saturation effect. It efficiently works in pulsed stray fields, where a conventional rem-counter underestimates by a factor of 2. It is also able to reject the very intense and pulsed photon contribution that often accompanies the neutron field with good reliability.

  17. Development of a Survey to Assess the Acceptability of an Innovative Contraception Practice among Rural Pharmacists

    Directory of Open Access Journals (Sweden)

    Michael Wong

    2014-03-01

    Full Text Available Improved access to effective contraceptive methods is needed in Canada, particularly in rural areas, where unintended pregnancy rates are high and specific sexual health services may be further away. A rural pharmacist may be the most accessible health care professional. Pharmacy practice increasingly incorporates cognitive services. In Canada many provinces allow pharmacists to independently prescribe for some indications, but not for hormonal contraception. To assess the acceptability for the implementation of this innovative practice in Canada, we developed and piloted a survey instrument. We chose questions to address the components for adoption and change described in Rogers’ “diffusion of innovations” theory. The proposed instrument was iteratively reviewed by 12 experts, then focus group tested among eight pharmacists or students to improve the instrument for face validity, readability, consistency and relevancy to community pharmacists in the Canadian context. We then pilot tested the survey among urban and rural pharmacies. 4% of urban and 35% of rural pharmacies returned pilot surveys. Internal consistency on repeated re-phrased questions was high (Cronbach’s Alpha = 0.901. We present our process for the development of a survey instrument to assess the acceptability and feasibility among Canadian community pharmacists for the innovative practice of the independent prescribing of hormonal contraception.

  18. Instrumentation reference book

    CERN Document Server

    Boyes, Walt

    2002-01-01

    Instrumentation is not a clearly defined subject, having a 'fuzzy' boundary with a number of other disciplines. Often categorized as either 'techniques' or 'applications' this book addresses the various applications that may be needed with reference to the practical techniques that are available for the instrumentation or measurement of a specific physical quantity or quality. This makes it of direct interest to anyone working in the process, control and instrumentation fields where these measurements are essential.* Comprehensive and authoritative collection of technical information* Writte

  19. Jones' instrument technology

    CERN Document Server

    Jones, Ernest Beachcroft; Kingham, Edward G; Radnai, Rudolf

    1985-01-01

    Jones' Instrument Technology, Volume 5: Automatic Instruments and Measuring Systems deals with general trends in automatic instruments and measuring systems. Specific examples are provided to illustrate the principles of such devices. A brief review of a considerable number of standards is undertaken, with emphasis on the IEC625 Interface System. Other relevant standards are reviewed, including the interface and backplane bus standards. This volume is comprised of seven chapters and begins with a short introduction to the principles of automatic measurements, classification of measuring system

  20. Medical instruments in museums

    DEFF Research Database (Denmark)

    Söderqvist, Thomas; Arnold, Ken

    2011-01-01

    This essay proposes that our understanding of medical instruments might benefit from adding a more forthright concern with their immediate presence to the current historical focus on simply decoding their meanings and context. This approach is applied to the intriguingly tricky question of what...... actually is meant by a "medical instrument." It is suggested that a pragmatic part of the answer might lie simply in reconsidering the holdings of medical museums, where the significance of the physical actuality of instruments comes readily to hand....

  1. Mass spectrometers: instrumentation

    Science.gov (United States)

    Cooks, R. G.; Hoke, S. H., II; Morand, K. L.; Lammert, S. A.

    1992-09-01

    Developments in mass spectrometry instrumentation over the past three years are reviewed. The subject is characterized by an enormous diversity of designs, a high degree of competition between different laboratories working with either different or similar techniques and by extremely rapid progress in improving analytical performance. Instruments can be grouped into genealogical charts based on their physical and conceptual interrelationships. This is illustrated using mass analyzers of different types. The time course of development of particular instrumental concepts is illustrated in terms of the s-curves typical of cell growth. Examples are given of instruments which are at the exponential, linear and mature growth stages. The prime examples used are respectively: (i) hybrid instruments designed to study reactive collisions of ions with surfaces: (ii) the Paul ion trap; and (iii) the triple quadrupole mass spectrometer. In the area of ion/surface collisions, reactive collisions such as hydrogen radical abstraction from the surface by the impinging ion are studied. They are shown to depend upon the chemical nature of the surface through the use of experiments which utilize self-assembled monolayers as surfaces. The internal energy deposited during surface-induced dissociation upon collision with different surfaces in a BEEQ instrument is also discussed. Attention is also given to a second area of emerging instrumentation, namely technology which allows mass spectrometers to be used for on-line monitoring of fluid streams. A summary of recent improvements in the performance of the rapidly developing quadrupole ion trap instrument illustrates this stage of instrument development. Improvements in resolution and mass range and their application to the characterization of biomolecules are described. The interaction of theory with experiment is illustrated through the role of simulations of ion motion in the ion trap. It is emphasized that mature instruments play a

  2. Manual of Surgical Instruments

    Directory of Open Access Journals (Sweden)

    Olga Lidia Sánchez Sarría

    2014-10-01

    Full Text Available Surgical instruments are the group of tools used in surgical procedures. They are very expensive and sophisticated. Consequently, a standardized and meticulous care is essential; they should go through the decontamination, cleaning and sterilization process. These instruments are designed in order to provide surgeons with tools that help them to perform a basic surgical procedure; there are multiple variations and the design depends on their function. This paper aims at showing all surgical instruments that can be used in an operating room during surgery and are not generally included in the medical literature.

  3. Biomedical Sensors and Instruments

    CERN Document Server

    Tagawa, Tatsuo

    2011-01-01

    The living body is a difficult object to measure: accurate measurements of physiological signals require sensors and instruments capable of high specificity and selectivity that do not interfere with the systems under study. As a result, detailed knowledge of sensor and instrument properties is required to be able to select the "best" sensor from one of the many designed to meet these challenges. From the underlying principles to practical applications, this updated edition of Biomedical Sensors and Instruments provides an easy-to-understand introduction to the various kinds of biome

  4. Overview of intercalibration of satellite instruments

    Science.gov (United States)

    Chander, G.; Hewison, T.J.; Fox, N.; Wu, X.; Xiong, X.; Blackwell, W.J.

    2013-01-01

    Inter-calibration of satellite instruments is critical for detection and quantification of changes in the Earth’s environment, weather forecasting, understanding climate processes, and monitoring climate and land cover change. These applications use data from many satellites; for the data to be inter-operable, the instruments must be cross-calibrated. To meet the stringent needs of such applications requires that instruments provide reliable, accurate, and consistent measurements over time. Robust techniques are required to ensure that observations from different instruments can be normalized to a common scale that the community agrees on. The long-term reliability of this process needs to be sustained in accordance with established reference standards and best practices. Furthermore, establishing physical meaning to the information through robust Système International d'unités (SI) traceable Calibration and Validation (Cal/Val) is essential to fully understand the parameters under observation. The processes of calibration, correction, stability monitoring, and quality assurance need to be underpinned and evidenced by comparison with “peer instruments” and, ideally, highly calibrated in-orbit reference instruments. Inter-calibration between instruments is a central pillar of the Cal/Val strategies of many national and international satellite remote sensing organizations. Inter-calibration techniques as outlined in this paper not only provide a practical means of identifying and correcting relative biases in radiometric calibration between instruments but also enable potential data gaps between measurement records in a critical time series to be bridged. Use of a robust set of internationally agreed upon and coordinated inter-calibration techniques will lead to significant improvement in the consistency between satellite instruments and facilitate accurate monitoring of the Earth’s climate at uncertainty levels needed to detect and attribute the mechanisms

  5. Canadian contributions studies for the WFIRST instruments

    Science.gov (United States)

    Lavigne, J.-F.; Rowlands, N.; Grandmont, F. J.; Lafrenière, D.; Marois, C.; Daigle, O.; Thibault, S.; Schade, D.; Artigau, É.; Brousseau, D.; Maire, J.; Cretot-Richert, G.; Ducharme, M.-È.; Levesque, L. E.; Laurin, D.; Dupuis, J.

    2016-07-01

    WFIRST-AFTA is the NASA's highest ranked astrophysics mission for the next decade that was identified in the New World, New Horizon survey. The mission scientific drivers correspond to some of the deep questions identified in the Canadian LRP2010, and are also of great interest for the Canadian scientists. Given that there is also a great interest in having an international collaboration in this mission, the Canadian Space Agency awarded two contracts to study a Canadian participation in the mission, one related to each instrument. This paper presents a summary of the technical contributions that were considered for a Canadian contribution to the coronagraph and wide field instruments.

  6. The DESI Experiment Part II: Instrument Design

    OpenAIRE

    DESI Collaboration; Aghamousa, Amir; Aguilar, Jessica; Ahlen, Steve; Alam, Shadab; Allen, Lori E.; Prieto, Carlos Allende; Annis, James; Bailey, Stephen; Balland, Christophe; Ballester, Otger; Baltay, Charles; Beaufore, Lucas; Bebek, Chris; Beers, Timothy C.

    2016-01-01

    DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= \\lambda/\\Delta...

  7. Challenges in marine instrumentation

    Digital Repository Service at National Institute of Oceanography (India)

    Afzulpurkar, S.; Desa, E.; Joseph, A.; Chakraborty, B.; Nayak, M.R.; Ranade, G.

    . Acoustic and optical instrumentation combined on the same platform would be able to address these problems. For this autonomous vehicles with extremely low power requirements, long term deployment and data transmission capability via satellites after...

  8. UV and EUV Instruments

    CERN Document Server

    Werner, K

    2010-01-01

    We describe telescopes and instruments that were developed and used for astronomical research in the ultraviolet (UV) and extreme ultraviolet (EUV) regions of the electromagnetic spectrum. The wavelength ranges covered by these bands are not uniquely defined. We use the following convention here: The EUV and UV span the regions ~100-912 and 912-3000 Angstroem respectively. The limitation between both ranges is a natural choice, because the hydrogen Lyman absorption edge is located at 912 Angstroem. At smaller wavelengths, astronomical sources are strongly absorbed by the interstellar medium. It also marks a technical limit, because telescopes and instruments are of different design. In the EUV range, the technology is strongly related to that utilized in X-ray astronomy, while in the UV range the instruments in many cases have their roots in optical astronomy. We will, therefore, describe the UV and EUV instruments in appropriate conciseness and refer to the respective chapters of this volume for more technic...

  9. Fiber Optics Instrumentation Development

    Science.gov (United States)

    Chan, Patrick Hon Man; Parker, Allen R., Jr.; Richards, W. Lance

    2010-01-01

    This is a general presentation of fiber optics instrumentation development work being conducted at NASA Dryden for the past 10 years and recent achievements in the field of fiber optics strain sensors.

  10. Instrumentation for Materials Research

    Science.gov (United States)

    Claassen, Richard S.

    1976-01-01

    Discusses how sophisticated instrumentation techniques yield practical results in three typical materials problems: fracture analysis, joining, and compatibility. Describes techniques such as scanning and transmission electron microscopy, and Auger spectroscopy. (MLH)

  11. VIRUS instrument collimator assembly

    Science.gov (United States)

    Marshall, Jennifer L.; DePoy, Darren L.; Prochaska, Travis; Allen, Richard D.; Williams, Patrick; Rheault, Jean-Philippe; Li, Ting; Nagasawa, Daniel Q.; Akers, Christopher; Baker, David; Boster, Emily; Campbell, Caitlin; Cook, Erika; Elder, Alison; Gary, Alex; Glover, Joseph; James, Michael; Martin, Emily; Meador, Will; Mondrik, Nicholas; Rodriguez-Patino, Marisela; Villanueva, Steven; Hill, Gary J.; Tuttle, Sarah; Vattiat, Brian; Lee, Hanshin; Chonis, Taylor S.; Dalton, Gavin B.; Tacon, Mike

    2014-07-01

    The Visual Integral-Field Replicable Unit Spectrograph (VIRUS) instrument is a baseline array 150 identical fiber fed optical spectrographs designed to support observations for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX). The collimator subassemblies of the instrument have been assembled in a production line and are now complete. Here we review the design choices and assembly practices used to produce a suite of identical low-cost spectrographs in a timely fashion using primarily unskilled labor.

  12. Modeling of Musical Instruments

    Science.gov (United States)

    Bader, Rolf; Hansen, Uwe

    Signal processing techniques in acoustics address many concerns. Included are such things as wave propagation variables, amplitude considerations, spectral content, wavelength, and phase. Phase is primarily of concern when waves interact with each other, as well as with a medium, and the imposition of boundary conditions leads to normal mode vibrations. Such conditions are prevalent in all musical instruments, and thus relevant signal processing techniques are essential to both understanding and modeling the structure of musical instruments and the sound radiated.

  13. Consistent assignment of nurse aides: association with turnover and absenteeism.

    Science.gov (United States)

    Castle, Nicholas G

    2013-01-01

    Consistent assignment refers to the same caregivers consistently caring for the same residents almost every time caregivers are on duty. This article examines the association of consistent assignment of nurse aides with turnover and absenteeism. Data came from a survey of nursing home administrators, the Online Survey Certification and Reporting data, and the Area Resource File. The measures were from 2007 and came from 3,941 nursing homes. Multivariate logistic regression models were used to examine turnover and absenteeism. An average of 68% of nursing homes reported using consistent assignment, with 28% of nursing homes using nurse aides consistent assignment at the often recommended level of 85% (or more). Nursing homes using recommended levels of consistent assignment had significantly lower rates of turnover and of absenteeism. In the multivariate analyses, consistent assignment was significantly associated with both lower turnover and lower absenteeism (p assignment is a practice recommended by many policy makers, government agencies, and industry advocates. The findings presented here provide some evidence that the use of this staffing practice can be beneficial.

  14. Consistency of Holland Code and Its Relation to Persistence in a College Major.

    Science.gov (United States)

    Latona, Janet R.

    1989-01-01

    Studied consistency of Holland hexagon code and persistence in college major among 3,612 subjects using the American College Testing Program interest inventory and World of Work Map score reporting instrument. Examined consistency of individual interest scores and consistency of chosen environment. Results indicated no difference in persistence…

  15. [Development of an instrument for the surveillance of quality indicators in specialized training in Preventive Medicine and Public Health].

    Science.gov (United States)

    Gil-Borrelli, Christian Carlo; Latasa, Pello; Reques, Laura; Alemán, Guadalupe

    2015-01-01

    This study describes the process of developing an instrument intended for use in assessing satisfaction with the quality of training in preventive medicine and public health for resident physicians. To develop this instrument, the National Survey of Satisfaction with Medical Residency was adapted by an expert panel consisting of 23 resident physicians in preventive medicine and public health belonging to 9 autonomous communities in Spain. The adaptation of the survey to the specialty rotations included new dimensions and items and was evaluated with a 5-point Likert scale. The most important dimensions were planning and the achievement of specific objectives, supervision, delegation of responsibilities, resources and work environment, personal assessment, encouragement, support, and whether the rotation resulted in a publication or research project, etc. The development and utilization of this tool will enable future trainees in preventive medicine and public health to make an informed choice about their training itineraries. Copyright © 2015 SESPAS. Published by Elsevier Espana. All rights reserved.

  16. The ESPRI project: astrometric exoplanet search with PRIMA I. Instrument description and performance of first light observations

    CERN Document Server

    Sahlmann, J; Queloz, D; Quirrenbach, A; Elias, N M; Launhardt, R; Pepe, F; Reffert, S; Segransan, D; Setiawan, J; Abuter, R; Andolfato, L; Bizenberger, P; Baumeister, H; Chazelas, B; Delplancke, F; Derie, F; Di Lieto, N; Duc, T P; Fleury, M; Graser, U; Kaminski, A; Koehler, R; Leveque, S; Maire, C; Megevand, D; Merand, A; Michellod, Y; Moresmau, J -M; Mohler, M; Mueller, A; Muellhaupt, P; Naranjo, V; Sache, L; Salvade, Y; Schmid, C; Schuhler, N; Schulze-Hartung, T; Sosnowska, D; Tubbs, B; van Belle, G T; Wagner, K; Weber, L; Zago, L; Zimmerman, N

    2012-01-01

    The ESPRI project relies on the astrometric capabilities offered by the PRIMA facility of the Very Large Telescope Interferometer for the discovery and study of planetary systems. Our survey consists of obtaining high-precision astrometry for a large sample of stars over several years and to detect their barycentric motions due to orbiting planets. We present the operation principle, the instrument's implementation, and the results of a first series of test observations. A comprehensive overview of the instrument infrastructure is given and the observation strategy for dual-field relative astrometry is presented. The differential delay lines, a key component of the PRIMA facility which was delivered by the ESPRI consortium, are described and their performance within the facility is discussed. Observations of bright visual binaries are used to test the observation procedures and to establish the instrument's astrometric precision and accuracy. The data reduction strategy for astrometry and the necessary correc...

  17. The Survey Questionnaire

    Science.gov (United States)

    Ritter, Lois A. Ed.; Sue, Valerie M., Ed.

    2007-01-01

    Internet-based surveys are still relatively new, and researchers are just beginning to articulate best practices for questionnaire design. Online questionnaire design has generally been guided by the principles applying to other self-administered instruments, such as paper-based questionnaires. Web-based questionnaires, however, have the potential…

  18. Increased Science Instrumentation Funding Strengthens Mars Program

    Science.gov (United States)

    Graham, Lee D.; Graff, T. G.

    2012-01-01

    As the strategic knowledge gaps mature for the exploration of Mars, Mars sample return (MSR), and Phobos/Deimos missions, one approach that becomes more probable involves smaller science instrumentation and integrated science suites. Recent technological advances provide the foundation for a significant evolution of instrumentation; however, the funding support is currently too small to fully utilize these advances. We propose that an increase in funding for instrumentation development occur in the near-term so that these foundational technologies can be applied. These instruments would directly address the significant knowledge gaps for humans to Mars orbit, humans to the Martian surface, and humans to Phobos/ Deimos. They would also address the topics covered by the Decadal Survey and the Mars scientific goals, objectives, investigations and priorities as stated by the MEPAG. We argue that an increase of science instrumentation funding would be of great benefit to the Mars program as well as the potential for human exploration of the Mars system. If the total non-Earth-related planetary science instrumentation budget were increased 100% it would not add an appreciable amount to the overall NASA budget and would provide the real potential for future breakthroughs. If such an approach were implemented in the near-term, NASA would benefit greatly in terms of science knowledge of the Mars, Phobos/Deimos system, exploration risk mitigation, technology development, and public interest.

  19. INTELLIGENT VIRTUAL CONTROL:MEASURING INSTRUMENT FROM WHOLE TO PART

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new concept called intelligent virtual control (IVC), which can be driven by measuring functions, is put forward. This small "intelligent measurement instrument unit (IMIU)", carrying with functions of instrument, consists of different types of intelligent virtual instrument (IVI) through individual components together as building blocks and can be displayed directly on the computer screen. This is a new concept of measuring instrument, and also an important breakthrough after virtual instrument (VI). Virtual control makes instrument resources obtain further exploitation. It brings about a fundamental change to the design and manufacturing mode. The instrument therefore, can not only be produced directly inside a PC, but the product is involved in the "green product" system. So far, all the present digital instruments will grow to be replaced by intelligent control with green characteristics.

  20. Plane and geodetic surveying

    CERN Document Server

    Johnson, Aylmer

    2014-01-01

    IntroductionAim And ScopeClassification Of SurveysThe Structure Of This BookGeneral Principles Of SurveyingErrorsRedundancyStiffnessAdjustmentPlanning And Record KeepingPrincipal Surveying ActivitiesEstablishing Control NetworksMappingSetting OutResectioningDeformation MonitoringAngle MeasurementThe Surveyor's CompassThe ClinometerThe Total StationMaking ObservationsChecks On Permanent AdjustmentsDistance MeasurementGeneralTape MeasurementsOptical Methods (Tachymetry)Electromagnetic Distance Measurement (EDM)Ultrasonic MethodsGNSSLevellingTheoryThe InstrumentTechniqueBookingPermanent Adjustmen

  1. INSURING CONSISTENCY WITHIN THE WIPO’S UDRP DECISIONS ON DOMAIN NAMES LITIGATIONS

    Directory of Open Access Journals (Sweden)

    BEATRICE ONICA JARKA

    2011-04-01

    Full Text Available The paper presents the need of insuring consistency within the domain name litigations starting with the adoption of the UDRP as a mean to insure uniform dispute resolution and continuing with the creation and application of the different practical instruments of insuring consistency identified and used by the few providers of UDRP services. The paper shall focus on the UDRP’s application by the WIPO Mediation and Arbitration Center and the consistency issues under UDRP, by analyzing the working instruments of insuring this consistency at the level of Administrative Panel’s decision and how these instruments are thought within the UDRP WIPO’s practice. Further the paper shall analyze the correspondence between the independence of the Administrative Panel and the consistency issues and shall conclude on the need to insure consistency as a prerequisite for predictability and stability of the domain names dispute resolution.

  2. Research and Development on a Public Attitude Instrument for Stuttering

    Science.gov (United States)

    St. Louis, Kenneth O.

    2012-01-01

    This paper summarizes research associated with the development of the "Public Opinion Survey of Human Attributes-Stuttering" ("POSHA-S"), a survey instrument designed to provide a worldwide standard measure of public attitudes toward stuttering. Pilot studies with early experimental prototypes of the "POSHA-S" are summarized that relate to…

  3. Research and Development on a Public Attitude Instrument for Stuttering

    Science.gov (United States)

    St. Louis, Kenneth O.

    2012-01-01

    This paper summarizes research associated with the development of the "Public Opinion Survey of Human Attributes-Stuttering" ("POSHA-S"), a survey instrument designed to provide a worldwide standard measure of public attitudes toward stuttering. Pilot studies with early experimental prototypes of the "POSHA-S" are summarized that relate to…

  4. 药品规格与其临床单次给药剂量的一致性及适配性调查分析%Survey on the consistency and suitability between drug specifications and its clinical single doses

    Institute of Scientific and Technical Information of China (English)

    徐梦丹; 巫丽娟

    2014-01-01

    Objective To provide the empirical references for medical institutions selecting drug specifications,pharma-ceutical enterprises designing drug specifications,and government departments formulating relevant drug specifications management policies through surveying the consistency and suitability between drug specifications and its clinical sin-gle doses based on the clinical prescription information data. Methods The prescription information data of 10 days were randomly selected from the hospital information system of the Fourth Affiliated Hospital of Guangzhou Medical University,after excluding some drug-using records which did not conform to the requirements,the 5533 prescriptions, 16 357 drug-using records and 621 drugs were treated as the research sample,and a database was established,then the statistical indicators such as the frequencies and percentages of drug-using records of consistency and suitability be-tween drug specifications and its clinical single doses were analyzed. Results The inconsistency rate and unsuitability rate between drug specifications and its clinical single doses of total drug-using records were 38.6% and 20.3%,re-spectively. Conclusion As for the drugs,especially the pediatric drugs currently circulating on the market in our coun-try,the suitability between their specifications and clinical single doses has a large improvement space.The related orga-nizations,such as government departments,pharmaceutical enterprises,hospitals and so on,should make joint efforts to solve the problem.%目的:基于临床处方用药信息数据,考察药品规格与其临床单次给药剂量的一致性及适配性状况,为医疗机构选择药品规格、制药企业设计药品规格、政府部门制订有关药品规格管理政策等提供实证参考。方法从广州医科大学附属第四医院的医院信息系统中随机抽取10 d的处方信息数据,排除部分不符合要求的用药记录后,以5533张处方、16357

  5. The keyboard instruments.

    Science.gov (United States)

    Manchester, Ralph A

    2014-06-01

    Now that the field of performing arts medicine has been in existence for over three decades, we are approaching a key point: we should start to see more articles that bring together the data that have been collected from several studies in order to draw more robust conclusions. Review articles and their more structured relative, the meta-analysis, can help to improve our understanding of a particular topic, comparing and synthesizing the results of previous research that has been done on that subject area. One way this could be done would be to review the research that has been carried out on the performance-related problems associated with playing a particular instrument or group of instruments. While I am not going to do that myself, I hope that others will. In this editorial, I will do a very selective review of the playing-related musculoskeletal disorders (PRMDs) associated with one instrument group (the keyboard instruments), focusing on the most played instrument in that group (the piano;).

  6. An instrument to measure passenger satisfaction of a public transport system

    Directory of Open Access Journals (Sweden)

    Viviane Leite Dias de Mattos

    2017-03-01

    Full Text Available This study proposes an instrument, based on fuzzy logic, to measure the satisfaction with the public transport. It is based on previous studies, expert opinion and results of two surveys conducted among the data samples of the studied population: a university community. Qualitative techniques (questionaries and interviews were used for validating content, while the construct validation uses quantitative techniques (Factor Analysis and Reliability Analysis. An experiment is also performed to define some properties of fuzzy controllers: membership function and method of defuzzification. The final instrument consists of twenty items in four dimensions, namely: service, stops/terminals, vehicle and safety. It is considered valid and reliable by the present study. It can be used as a tool to understand the satisfaction of the passengers of public transport system investigated. It can also provide subsidies for managers to improve their work quality.

  7. 14 CFR 33.29 - Instrument connection.

    Science.gov (United States)

    2010-01-01

    ... connection must be provided on each turbojet engine for an indicator system to indicate rotor system... necessary to ensure that the probability of a fault propagating from instrumentation and monitoring functions to control functions, or vice versa, is consistent with the failure effect of the fault. (h)...

  8. A review of health-related workplace productivity loss instruments.

    Science.gov (United States)

    Lofland, Jennifer H; Pizzi, Laura; Frick, Kevin D

    2004-01-01

    The objective of this review was to identify health-related workplace productivity loss survey instruments, with particular emphasis on those that capture a metric suitable for direct translation into a monetary figure. A literature search using Medline, HealthSTAR, PsycINFO and Econlit databases between 1966 and 2002, and a telephone-administered survey of business leaders and researchers, were conducted to identify health-related workplace productivity measurement survey instruments. This review was conducted from the societal perspective. Each identified instrument was reviewed for the following: (i). reliability; (ii). content validity; (iii). construct validity; (iv). criterion validity; (v). productivity metric(s); (vi). instrument scoring technique; (vii). suitability for direct translation into a monetary figure; (viii). number of items; (ix). mode(s) of administration; and (x). disease state(s) in which it had been tested. Reliability and validity testing have been performed for 8 of the 11 identified surveys. Of the 11 instruments identified, six captured metrics that are suitable for direct translation into a monetary figure. Of those six, one instrument measured absenteeism, while the other five measured both absenteeism and presenteeism. All of the identified instruments except for one were available as paper, self-administered questionnaires and many were available in languages other than English. This review provides a comprehensive overview of the published, peer-reviewed survey instruments available to measure health-related workplace productivity loss. As the field of productivity measurement matures, tools may be developed that will allow researchers to accurately calculate lost productivity costs when performing cost-effectiveness and cost-benefit analyses. Using data captured by these instruments, society and healthcare decision makers will be able to make better informed decisions concerning the value of the medications, disease management and

  9. Biochemistry Instrumentation Core Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — The UCLA-DOE Biochemistry Instrumentation Core Facility provides the UCLA biochemistry community with easy access to sophisticated instrumentation for a wide variety...

  10. Heat Flux Instrumentation Laboratory (HFIL)

    Data.gov (United States)

    Federal Laboratory Consortium — Description: The Heat Flux Instrumentation Laboratory is used to develop advanced, flexible, thin film gauge instrumentation for the Air Force Research Laboratory....

  11. [Wisconsin Administrative Practice Scale: Special Education. A Survey of Selected Administrative Practices Used in the Coordination of Diagnostic Units for Handicapped Children. Test and Manual.].

    Science.gov (United States)

    Lietz, Jeremy Jon

    The Wisconsin Administrative Practice Scale: Special Education (WAPS) is a self-administering survey instrument designed to measure implementation of 162 selected administrative practices and policies used to coordinate diagnostic units for handicapped children. One hundred thirty-five items are grouped into seven subscales each consisting of…

  12. ONLINE INSTRUMENTS IN QUANTITATIVE MARKETING RESEARCH

    OpenAIRE

    STOICA, Ivona

    2011-01-01

    The Internet has brought great benefits, revolutionizing the world of marketing instruments used for advertising, bringing new areas such as search engine marketing, online marketing research, is a mediator of diverse individuals gathered in communities where borders no longer matter, and information is immeasurable. The impact of Internet use in marketing research refers to collecting data through online quantitative survey. This paper has its duty to reveal the importance of online cantitat...

  13. Aethalometer™ Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Sedlacek, Arthur J [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-04-01

    The Aethalometer is an instrument that provides a real-time readout of the concentration of “Black” or “Elemental” carbon aerosol particles (BC or E) in an air stream (see Figure 1 and Figure 2). It is a self-contained instrument that measures the rate of change of optical transmission through a spot on a filter where aerosol is being continuously collected and uses the information to calculate the concentration of optically absorbing material in the sampled air stream. The instrument measures the transmitted light intensities through the “sensing” portion of the filter, on which the aerosol spot is being collected, and a “reference” portion of the filter as a check on the stability of the optical source. A mass flowmeter monitors the sample air flow rate. The data from these three measurements is used to determine the mean BC content of the air stream.

  14. 3D Spectroscopic Instrumentation

    CERN Document Server

    Bershady, Matthew A

    2009-01-01

    In this Chapter we review the challenges of, and opportunities for, 3D spectroscopy, and how these have lead to new and different approaches to sampling astronomical information. We describe and categorize existing instruments on 4m and 10m telescopes. Our primary focus is on grating-dispersed spectrographs. We discuss how to optimize dispersive elements, such as VPH gratings, to achieve adequate spectral resolution, high throughput, and efficient data packing to maximize spatial sampling for 3D spectroscopy. We review and compare the various coupling methods that make these spectrographs ``3D,'' including fibers, lenslets, slicers, and filtered multi-slits. We also describe Fabry-Perot and spatial-heterodyne interferometers, pointing out their advantages as field-widened systems relative to conventional, grating-dispersed spectrographs. We explore the parameter space all these instruments sample, highlighting regimes open for exploitation. Present instruments provide a foil for future development. We give an...

  15. Micro mushroom instrumentation system

    Science.gov (United States)

    Davidson, W. F.

    1986-01-01

    An electronics circuit which provides for the recording of instrumentation data on an optical disk is disclosed. The optical disk is formatted in a spiral format instead of concentric tracks. The spiral format allows data to be recorded without the gaps that would be associated with concentric tracks. The instrumentation system provides each channel with a program instrumentation amplifier, a six pole lowpass switched capacitor filter, a sample and hold amplifier, and a digital to analog converter to provide automatic offset capability. Since each channel has its own components, simultaneous samples of every channel can be captured. All of the input signal's channel variables can be captured. All of the input signal's channel variables can be changed under software control without hardware changes. A single board computer is used for a system controller.

  16. ISSUERS OF FINANCIAL INSTRUMENTS

    Directory of Open Access Journals (Sweden)

    Cristian GHEORGHE

    2016-05-01

    Full Text Available The rules laid down by Romanian Capital Market Law and the regulations put in force for its implementation apply to issuers of financial instruments admitted to trading on the regulated market established in Romania. But the issuers remain companies incorporated under Company Law of 1990. Such dual regulations need increased attention in order to observe the legal status of the issuers/companies and financial instruments/shares. Romanian legislator has chosen to implement in Capital Market Law special rules regarding the administration of the issuers of financial instruments, not only rules regarding admitting and maintaining to a regulated market. Thus issuers are, in Romanian Law perspective, special company that should comply special rule regarding board of administration and general shareholders meeting.

  17. Calibration of Geodetic Instruments

    Directory of Open Access Journals (Sweden)

    Marek Bajtala

    2005-06-01

    Full Text Available The problem of metrology and security systems of unification, correctness and standard reproducibilities belong to the preferred requirements of theory and technical practice in geodesy. Requirements on the control and verification of measured instruments and equipments increase and the importance and up-to-date of calibration get into the foreground. Calibration possibilities of length-scales (of electronic rangefinders and angle-scales (of horizontal circles of geodetic instruments. Calibration of electronic rangefinders on the linear comparative baseline in terrain. Primary standard of planar angle – optical traverse and its exploitation for calibration of the horizontal circles of theodolites. The calibration equipment of the Institute of Slovak Metrology in Bratislava. The Calibration process and results from the calibration of horizontal circles of selected geodetic instruments.

  18. Development of an instrument to measure deliberate practice in professional nurses.

    Science.gov (United States)

    Bathish, Melissa; Aebersold, Michelle; Fogg, Louis; Potempa, Kathleen

    2016-02-01

    This paper describes the development of the Deliberate Practice in Nursing Questionnaire (DPNQ) and the reliability and validity characteristics of the instrument. A cross-sectional, descriptive study assessed the DPNQ in a sample of critical care registered nurses (RN). It was conducted at one large Midwestern teaching hospital. A medical intensive care unit (ICU), a surgical ICU, and a trauma/burn ICU participated. Instrument construction involved item development based on a literature review, an existing deliberate practice questionnaire and existing parameters of deliberate practice in nursing. Content reliability and validity were established by expert panel review and survey testing. Probit analysis of survey data was used to develop a composite score for the DPNQ. Expert panel review revealed an inter-rater agreement (80% reliability) of .92-.96 and a content validity index of 0.94. The final DPNQ consists of 24 items with six subcategories and a composite score of 96. Cronbach's alpha coefficient for the DPNQ in this study was .660 (standardized, .703). The instrument was further validated with the Nurse Competence Scale. Deliberate practice was significantly, positively correlated with competence (rs=.366, p=001). Findings from the expert panel provided guidance for development and revision of the DPNQ. Survey testing of the instrument revealed a promising measure of deliberate practice with good reliability and validity characteristics. Identification of a relationship between deliberate practice and competence confirms existing evidence in other domains, providing further validation. Understanding deliberate practice provides a unique way to examine nursing expertise. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. The DESI Experiment Part II: Instrument Design

    CERN Document Server

    Aghamousa, Amir; Ahlen, Steve; Alam, Shadab; Allen, Lori E; Prieto, Carlos Allende; Annis, James; Bailey, Stephen; Balland, Christophe; Ballester, Otger; Baltay, Charles; Beaufore, Lucas; Bebek, Chris; Beers, Timothy C; Bell, Eric F; Bernal, José Luis; Besuner, Robert; Beutler, Florian; Blake, Chris; Bleuler, Hannes; Blomqvist, Michael; Blum, Robert; Bolton, Adam S; Briceno, Cesar; Buckley-Geer, Elizabeth; Burden, Angela; Burtin, Etienne; Busca, Nicolas G; Cahn, Robert N; Cai, Yan-Chuan; Carlberg, Raymond G; Carton, Pierre-Henri; Casas, Ricard; Castander, Francisco J; Claybaugh, Todd M; Close, Madeline; Coker, Carl T; Cole, Shaun; Cooper, Andrew P; Cousinou, M -C; Crocce, Martin; Cuby, Jean-Gabriel; Cunningham, Daniel P; Davis, Tamara; Dawson, Kyle S; de la Macorra, Axel; De Vicente, Juan; Delubac, Timothée; Derwent, Mark; Dey, Arjun; Dhungana, Govinda; Ding, Zhejie; Duan, Yutong T; Ealet, Anne; Edelstein, Jerry; Eftekharzadeh, Sarah; Eisenstein, Daniel J; Elliott, Ann; Escoffier, Stephanie; Evatt, Matthew; Fagrelius, Parker; Fan, Xiaohui; Fanning, Kevin; Farahi, Arya; Favole, Ginevra; Feng, Yu; Fernandez, Enrique; Findlay, Joseph R; Finkbeiner, Douglas P; Fitzpatrick, Michael J; Flaugher, Brenna; Flender, Samuel; Font-Ribera, Andreu; Forero-Romero, Jaime E; Fosalba, Pablo; Frenk, Carlos S; Fumagalli, Michele; Garcia-Bellido, Juan; Gaztanaga, Enrique; Gershkovich, Irina; Gillet, Denis; Gonzalez-de-Rivera, Guillermo; Gonzalez-Perez, Violeta; Gott, Shelby; Graur, Or; Gutierrez, Gaston; Guy, Julien; Habib, Salman; Heetderks, Henry; Heetderks, Ian; Heitmann, Katrin; Hellwing, Wojciech A; Herrera, David A; Ho, Shirley; Honscheid, Klaus; Huff, Eric; Hutchinson, Timothy A; Huterer, Dragan; Hwang, Ho Seong; Laguna, Joseph Maria Illa; Ishikawa, Yuzo; Jacobs, Dianna; Jeffrey, Niall; Jelinsky, Patrick; Jiang, Linhua; Jimenez, Jorge; Johnson, Jennifer; Joyce, Richard; Jullo, Eric; Juneau, Stephanie; Kama, Sami; Karcher, Armin; Karkar, Sonia; Kehoe, Robert; Kennamer, Noble; Kent, Stephen; Kilbinger, Martin; Kim, Alex G; Kirkby, David; Kisner, Theodore; Kitanidis, Ellie; Kneib, Jean-Paul; Koposov, Sergey; Kovacs, Eve; Kremin, Anthony; Kron, Richard; Kronig, Luzius; Kueter-Young, Andrea; Lacey, Cedric G; Lafever, Robin; Lahav, Ofer; Lambert, Andrew; Landriau, Martin; Lang, Dustin; Name, Publication; Lauer, Tod R; Goff, Jean-Marc Le; Guillou, Laurent Le; Van Suu, Auguste Le; Lee, Jae Hyeon; Lee, Su-Jeong; Leitner, Daniela; Levi, Michael E; L'Huillier, Benjamin; Li, Baojiu; Liang, Ming; Lin, Huan; Linder, Eric; Loebman, Sarah R; Lukić, Zarija; MacCrann, Niall; Magneville, Christophe; Makarem, Laleh; Manera, Marc; Manser, Christopher J; Marshall, Robert; Martini, Paul; Massey, Richard; Matheson, Thomas; McCauley, Jeremy; McDonald, Patrick; McGreer, Ian D; Meisner, Aaron; Metcalfe, Nigel; Miller, Timothy N; Miquel, Ramon; Moustakas, John; Myers, Adam; Naik, Milind; Newman, Jeffrey; Nichol, Robert C; Nicola, Andrina; da Costa, Luiz Nicolati; Niz, Gustavo; Norberg, Peder; Nord, Brian; Norman, Dara; Nugent, Peter; O'Brien, Thomas; Oh, Minji; Olsen, Knut A G; Padilla, Cristobal; Padmanabhan, Hamsa; Padmanabhan, Nikhil; Palanque-Delabrouille, Nathalie; Palmese, Antonella; Pappalardo, Daniel; Park, Changbom; Patej, Anna; Peacock, John A; Peiris, Hiranya V; Percival, Will J; Perruchot, Sandrine; Pieri, Matthew M; Pogge, Richard; Poppett, Claire; Probst, Ronald G; Rabinowitz, David; Ree, Chang Hee; Refregier, Alexandre; Regal, Xavier; Reid, Beth; Reil, Kevin; Rezaie, Mehdi; Rockosi, Connie; Roe, Natalie; Ronayette, Samuel; Roodman, Aaron; Ross, Ashley J; Ross, Nicholas P; Rossi, Graziano; Rozo, Eduardo; Ruhlmann-Kleider, Vanina; Rykoff, Eli; Sabiu, Cristiano; Samushia, Lado; Sanchez, Javier; Schlegel, David J; Schneider, Michael; Schubnell, Michael; Secroun, Aurélia; Seljak, Uros; Seo, Hee-Jong; Serrano, Santiago; Shafieloo, Arman; Shan, Huanyuan; Sholl, Michael J; Shourt, William V; Silber, Joseph H; Silva, David R; Sirk, Martin M; Slosar, Anze; Smith, Alex; Smoot, George; Som, Debopam; Song, Yong-Seon; Sprayberry, David; Staten, Ryan; Stefanik, Andy; Tarle, Gregory; Tie, Suk Sien; Tinker, Jeremy L; Tojeiro, Rita; Valdes, Francisco; Valenzuela, Octavio; Valluri, Monica; Vargas-Magana, Mariana; Verde, Licia; Walker, Alistair R; Wang, Yuting; Weaver, Benjamin A; Weaverdyck, Curtis; Wechsler, Risa; Weinberg, David H; White, Martin; Yang, Qian; Yeche, Christophe; Zhao, Gong-Bo; Zheng, Yi; Zhu, Yaling; Zou, Hu; Zu, Ying

    2016-01-01

    DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= \\lambda/\\Delta\\lambda$ between 2000 and 5500, depending on wavelength. The DESI instrument will be used to conduct a five-year survey designed to cover 14,000 deg$^2$. This powerful instrument will be installed at prime focus on the 4-m Mayall telescope in Kitt Peak, Arizona, along with a new optical corrector, which will provide a three-degree diameter field of view. The DESI collaboration will also deliver a spectroscopic pipeline and data management system to reduce and archive all data for eventual public use.

  20. The Dark Energy Spectroscopic Instrument (DESI): Data Systems

    Science.gov (United States)

    Bailey, Stephen; Bolton, Adam S.; Cahn, Robert N.; Dawson, Kyle; Forero Romero, Jaime; Guy, Julien; Kisner, Theodore; Moustakas, John; Nugent, Peter E.; Schlegel, David J.; Stark, Casey; Weaver, Benjamin; DESI Collaboration

    2015-01-01

    We present the design, status, and plans for the data systems of the Dark Energy Spectroscopic Instrument (DESI), a spectroscopic redshift survey of 25 million galaxies, quasars, and stars to be operated at the Kitt Peak National Observatory 4-m Mayall telescope from 2018-2023. DESI will obtain 5000 spectra (3600-9800 Å) per exposure using robotically positioned fibers. DESI data systems include the target selection pipeline, survey planning and operations, the spectroscopic data reduction pipeline, instrument simulations, and data transfer, archive, and distribution. While building on the heritage of previous galaxy redshift surveys, DESI is upgrading all aspects of the algorithms and pipelines to maximize the science reach of the new instrument and survey.

  1. Kiso Supernova Survey (KISS): Survey Strategy

    CERN Document Server

    Morokuma, Tomoki; Tanaka, Masaomi; Mori, Kensho; Matsumoto, Emiko; Kikuchi, Yuki; Shibata, Takumi; Sako, Shigeyuki; Aoki, Tsutomu; Doi, Mamoru; Kobayashi, Naoto; Maehara, Hiroyuki; Matsunaga, Noriyuki; Mito, Hiroyuki; Miyata, Takashi; Nakada, Yoshikazu; Soyano, Takao; Tarusawa, Ken'ichi; Miyazaki, Satoshi; Nakata, Fumiaki; Okada, Norio; Sarugaku, Yuki; Richmond, Michael W; Akitaya, Hiroshi; Aldering, Greg; Arimatsu, Ko; Contreras, Carlos; Horiuchi, Takashi; Hsiao, Eric Y; Itoh, Ryosuke; Iwata, Ikuru; Koji,; Kawabata, S; Kawai, Nobuyuki; Kitagawa, Yutaro; Kokubo, Mitsuru; Kuroda, Daisuke; Paolo,; Mazzali,; Misawa, Toru; Moritani, Yuki; Morrell, Nidia; Okamoto, Rina; Pavlyuk, Nikolay; Phillips, Mark M; Pian, Elena; Sahu, Devendra; Saito, Yoshihiko; Sano, Kei; Stritzinger, Maximilian D; Tachibana, Yutaro; Taddia, Francesco; Takaki, Katsutoshi; Tateuchi, Ken; Tomita, Akihiko; Tsvetkov, Dmitry; Ui, Takahiro; Ukita, Nobuharu; Urata, Yuji; Walker, Emma S; Yoshii, Taketoshi

    2014-01-01

    The Kiso Supernova Survey (KISS) is a high-cadence optical wide-field supernova (SN) survey. The primary goal of the survey is to catch the very early light of a SN, during the shock breakout phase. Detection of SN shock breakouts combined with multi-band photometry obtained with other facilities would provide detailed physical information on the progenitor stars of SNe. The survey is performed using a 2.2x2.2 deg field-of-view instrument on the 1.05-m Kiso Schmidt telescope, the Kiso Wide Field Camera (KWFC). We take a three-minute exposure in g-band once every hour in our survey, reaching magnitude g~20-21. About 100 nights of telescope time per year have been spent on the survey since April 2012. The number of the shock breakout detections is estimated to be of order of 1 during our 3-year project. This paper summarizes the KISS project including the KWFC observing setup, the survey strategy, the data reduction system, and CBET-reported SNe discovered so far by KISS.

  2. Kiso Supernova Survey (KISS): Survey strategy

    Science.gov (United States)

    Morokuma, Tomoki; Tominaga, Nozomu; Tanaka, Masaomi; Mori, Kensho; Matsumoto, Emiko; Kikuchi, Yuki; Shibata, Takumi; Sako, Shigeyuki; Aoki, Tsutomu; Doi, Mamoru; Kobayashi, Naoto; Maehara, Hiroyuki; Matsunaga, Noriyuki; Mito, Hiroyuki; Miyata, Takashi; Nakada, Yoshikazu; Soyano, Takao; Tarusawa, Ken'ichi; Miyazaki, Satoshi; Nakata, Fumiaki; Okada, Norio; Sarugaku, Yuki; Richmond, Michael W.; Akitaya, Hiroshi; Aldering, Greg; Arimatsu, Ko; Contreras, Carlos; Horiuchi, Takashi; Hsiao, Eric Y.; Itoh, Ryosuke; Iwata, Ikuru; Kawabata, Koji S.; Kawai, Nobuyuki; Kitagawa, Yutaro; Kokubo, Mitsuru; Kuroda, Daisuke; Mazzali, Paolo; Misawa, Toru; Moritani, Yuki; Morrell, Nidia; Okamoto, Rina; Pavlyuk, Nikolay; Phillips, Mark M.; Pian, Elena; Sahu, Devendra; Saito, Yoshihiko; Sano, Kei; Stritzinger, Maximilian D.; Tachibana, Yutaro; Taddia, Francesco; Takaki, Katsutoshi; Tateuchi, Ken; Tomita, Akihiko; Tsvetkov, Dmitry; Ui, Takahiro; Ukita, Nobuharu; Urata, Yuji; Walker, Emma S.; Yoshii, Taketoshi

    2014-12-01

    The Kiso Supernova Survey (KISS) is a high-cadence optical wide-field supernova (SN) survey. The primary goal of the survey is to catch the very early light of a SN, during the shock breakout phase. Detection of SN shock breakouts combined with multi-band photometry obtained with other facilities would provide detailed physical information on the progenitor stars of SNe. The survey is performed using a 2.2° × 2.2° field-of-view instrument on the 1.05-m Kiso Schmidt telescope, the Kiso Wide Field Camera (KWFC). We take a 3-min exposure in g-band once every hour in our survey, reaching magnitude g ˜ 20-21. About 100 nights of telescope time per year have been spent on the survey since 2012 April. The number of the shock breakout detections is estimated to be of the order of 1 during our three-year project. This paper summarizes the KISS project including the KWFC observing setup, the survey strategy, the data reduction system, and CBET-reported SNe discovered so far by KISS.

  3. Standard NIM instrumentation system

    CERN Document Server

    1990-01-01

    NIM is a standard modular instrumentation system that is in wide use throughout the world. As the NIM system developed and accommodations were made to a dynamic instrumentation field and a rapidly advancing technology, additions, revisions and clarifications were made. These were incorporated into the standard in the form of addenda and errata. This standard is a revision of the NIM document, AEC Report TID- 20893 (Rev 4) dated July 1974. It includes all the addenda and errata items that were previously issued as well as numerous additional items to make the standard current with modern technology and manufacturing practice.

  4. Animation of MARDI Instrument

    Science.gov (United States)

    2008-01-01

    [figure removed for brevity, see original site] Click on image to view the animation This animation shows a zoom into the Mars Descent Imager (MARDI) instrument onboard NASA's Phoenix Mars Lander. The Phoenix team will soon attempt to use a microphone on the MARDI instrument to capture sounds of Mars. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  5. Virtual Reality Musical Instruments

    DEFF Research Database (Denmark)

    Serafin, Stefania; Erkut, Cumhur; Kojs, Juraj

    2016-01-01

    The rapid development and availability of low-cost technologies have created a wide interest in virtual reality. In the field of computer music, the term “virtual musical instruments” has been used for a long time to describe software simulations, extensions of existing musical instruments......, and ways to control them with new interfaces for musical expression. Virtual reality musical instruments (VRMIs) that include a simulated visual component delivered via a head-mounted display or other forms of immersive visualization have not yet received much attention. In this article, we present a field...

  6. Spectroelectrochemical Instrument Measures TOC

    Science.gov (United States)

    Kounaves, Sam

    2011-01-01

    A spectroelectrochemical instrument has been developed for measuring the total organic carbon (TOC) content of an aqueous solution. Measurements of TOC are frequently performed in environmental, clinical, and industrial settings. Until now, techniques for performing such measurements have included, various ly, the use of hazardous reagents, ultraviolet light, or ovens, to promote reactions in which the carbon contents are oxidized. The instrument now being developed is intended to be a safer, more economical means of oxidizing organic carbon and determining the TOC levels of aqueous solutions and for providing a low power/mass unit for use in planetary missions.

  7. [Hardening of dental instruments].

    Science.gov (United States)

    Gerasev, G P

    1981-01-01

    The possibility of prolonging the service life of stomatological instruments by the local hardening of their working parts is discussed. Such hardening should be achieved by using hard and wear-resistant materials. The examples of hardening dental elevators and hard-alloy dental drills are given. New trends in the local hardening of instruments are the treatment of their working parts with laser beams, the application of coating on their surface by the gas-detonation method. The results of research work and trials are presented.

  8. Celadon Figurines Play Instruments

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    This group of figurines, each 0.15m tall, were unearthed from a Tang Dynasty tomb in Changsha in 1977. Music was very developed in the Tang Dynasty. Colorful musical instruments and dances were popular both among the people and in the palace. These vivid-looking figurines wear pleated skirts with small sleeves and open chest, a style influenced by the non-Han nationalities living in the north and west of China. Some of the musical instruments were brought from the Western Regions. The figurines are playing the xiao (a vertical bamboo flute), the konghou (an

  9. Virtual Reality Musical Instruments

    DEFF Research Database (Denmark)

    Serafin, Stefania; Erkut, Cumhur; Kojs, Juraj

    2016-01-01

    The rapid development and availability of low-cost technologies have created a wide interest in virtual reality. In the field of computer music, the term “virtual musical instruments” has been used for a long time to describe software simulations, extensions of existing musical instruments......, and ways to control them with new interfaces for musical expression. Virtual reality musical instruments (VRMIs) that include a simulated visual component delivered via a head-mounted display or other forms of immersive visualization have not yet received much attention. In this article, we present a field...

  10. Exit Creek Water Surface Survey, June 2013

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset consists of survey data from a longitudinal profile of water surface surveyed June 23-24, 2013 at Exit Creek, a stream draining Exit Glacier in Kenai...

  11. Exit Creek Transect Survey, June 2013

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset consists of survey data from transects surveyed June 10-12, 2013 along Exit Creek, a stream draining Exit Glacier in Kenai Fjords National Park, Alaska....

  12. Economic Policy Instruments

    DEFF Research Database (Denmark)

    Klemmensen, Børge

    2007-01-01

    Økonomiske instrumenter begrundes med behovet for politiske indgreb, der muliggør internaliseringen af omkostningerne ved de miljøpåvirkninger, produktion and levevis afstedkommer, således at hensyntagen til miljøet bliver en del af virksomheders og husholdningers omkostninger og dermed en tilsky...

  13. The ozone monitoring instrument

    NARCIS (Netherlands)

    Levelt, P.F.; Oord, G.H.J. van den; Dobber, M.R.; Mälkki, A.; Visser, H.; Vries, J. de; Stammes, P.; Lundell, J.O.V.; Saari, H.

    2006-01-01

    The Ozone Monitoring Instrument (OMI) flies on the National Aeronautics and Space Adminsitration's Earth Observing System Aura satellite launched in July 2004. OMI is a ultraviolet/visible (UV/VIS) nadir solar backscatter spectrometer, which provides nearly global coverage in one day with a spatial

  14. Creating a Super Instrument

    DEFF Research Database (Denmark)

    Kallionpää, Maria; Gasselseder, Hans-Peter

    2015-01-01

    Thanks to the development of new technology, musical instruments are no more tied to their existing acoustic or technical limitations as almost all parameters can be augmented or modified in real time. An increasing number of composers, performers, and computer programmers have thus become intere...

  15. Neutron instrumentation for biology

    Energy Technology Data Exchange (ETDEWEB)

    Mason, S.A. [Institut Laue-Langevin, Grenoble (France)

    1994-12-31

    In the October 1994 round of proposals at the ILL, the external biology review sub- committee was asked to allocate neutron beam time to a wide range of experiments, on almost half the total number of scheduled neutron instruments: on 3 diffractometers, on 3 small angle scattering instruments, and on some 6 inelastic scattering spectrometers. In the 3.5 years since the temporary reactor shutdown, the ILL`s management structure has been optimized, budgets and staff have been trimmed, the ILL reactor has been re-built, and many of the instruments up-graded, many powerful (mainly Unix) workstations have been introduced, and the neighboring European Synchrotron Radiation Facility has established itself as the leading synchrotron radiation source and has started its official user program. The ILL reactor remains the world`s most intense dedicated neutron source. In this challenging context, it is of interest to review briefly the park of ILL instruments used to study the structure and energetics of small and large biological systems. A brief summary will be made of each class of experiments actually proposed in the latest ILL proposal round.

  16. Advanced instrumentation and teleoperation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    1998-07-01

    SCK-CEN's advanced instrumentation and teleoperation project aims at evaluating the potential of a telerobotic approach in a nuclear environment and, in particular, the use of remote-perception systems. Main achievements in 1997 in the areas of R and D on radiation tolerance for remote sensing, optical fibres and optical-fibre sensors, and computer-aided teleoperation are reported.

  17. Economic Policy Instruments

    DEFF Research Database (Denmark)

    Klemmensen, Børge

    2007-01-01

    Økonomiske instrumenter begrundes med behovet for politiske indgreb, der muliggør internaliseringen af omkostningerne ved de miljøpåvirkninger, produktion and levevis afstedkommer, således at hensyntagen til miljøet bliver en del af virksomheders og husholdningers omkostninger og dermed en...

  18. Instrument for assaying radiation

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Jody Rustyn; Farfan, Eduardo B.

    2016-03-22

    An instrument for assaying radiation includes a flat panel detector having a first side opposed to a second side. A collimated aperture covers at least a portion of the first side of the flat panel detector. At least one of a display screen or a radiation shield may cover at least a portion of the second side of the flat panel detector.

  19. Integrating Nephelometer Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Uin, J. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-03-01

    The Integrating Nephelometer (Figure 1) is an instrument that measures aerosol light scattering. It measures aerosol optical scattering properties by detecting (with a wide angular integration – from 7 to 170°) the light scattered by the aerosol and subtracting the light scattered by the carrier gas, the instrument walls and the background noise in the detector (zeroing). Zeroing is typically performed for 5 minutes every day at midnight UTC. The scattered light is split into red (700 nm), green (550 nm), and blue (450 nm) wavelengths and captured by three photomultiplier tubes. The instrument can measure total scatter as well as backscatter only (from 90 to 170°) (Heintzenberg and Charlson 1996; Anderson et al. 1996; Anderson and Ogren 1998; TSI 3563 2015) At ARM (Atmospheric Radiation Measurement), two identical Nephelometers are usually run in series with a sample relative humidity (RH) conditioner between them. This is possible because Nephelometer sampling is non-destructive and the sample can be passed on to another instrument. The sample RH conditioner scans through multiple RH values in cycles, treating the sample. This kind of setup allows to study how aerosol particles’ light scattering properties are affected by humidification (Anderson et al. 1996). For historical reasons, the two Nephelometers in this setup are labeled “wet” and “dry”, with the “dry” Nephelometer usually being the one before the conditioner and sampling ambient air (the names are switched for the MAOS measurement site due to the high RH of the ambient air).

  20. Instruments of Transformative Governance

    DEFF Research Database (Denmark)

    Borrás, Susana

    production and distribution channels. PDPs aim at overcoming current market and government failures by pooling resources in the attempt to solve this global social challenge. Thus, PDPs are a case of instruments of transformative research and innovation, operating in a transnational governance context...

  1. The tropospheric monitoring instrument

    NARCIS (Netherlands)

    Voert, M.J. te; Brakel, R. van; Witvoet, G.

    2014-01-01

    Thermal and opto-mechanical design and analysis work has been done on the Tropospheric Monitoring Instrument (TROPOMI), a spectrometer on the Copernicus Sentinel 5 Precursor satellite. To verify compliance with the stringent opto-mechanical stability requirements, detailed thermal and thermo-mechani

  2. Virtual reality musical instruments

    DEFF Research Database (Denmark)

    Serafin, Stefania; Erkut, Cumhur; Kojs, Juraj

    2016-01-01

    The rapid development and availability of low cost technologies has created a wide interest in virtual reality (VR), but how to design and evaluate multisensory interactions in VR remains as a challenge. In this paper, we focus on virtual reality musical instruments, present an overview of our...

  3. The ozone monitoring instrument

    NARCIS (Netherlands)

    Levelt, P.F.; Oord, G.H.J. van den; Dobber, M.R.; Mälkki, A.; Visser, H.; Vries, J. de; Stammes, P.; Lundell, J.O.V.; Saari, H.

    2006-01-01

    The Ozone Monitoring Instrument (OMI) flies on the National Aeronautics and Space Adminsitration's Earth Observing System Aura satellite launched in July 2004. OMI is a ultraviolet/visible (UV/VIS) nadir solar backscatter spectrometer, which provides nearly global coverage in one day with a spatial

  4. Payment Instrument Characteristics

    DEFF Research Database (Denmark)

    Holst, Jacques; Kjeldsen, Martin; Hedman, Jonas

    2015-01-01

    payment innovations. Using the Repertory Grid technique to explore 15 payers’ perception of six payment instruments, including coins, banknotes, debit cards, credit cards, mobile payments, and on-line banking, we identify 16 payment characteristics. The characteristics aggregate seventy-six unique...

  5. Specification for Instrumentation

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Kofoed, Jens Peter

    This paper is intended to give an overview on instrumentation for monitoring the efficiency of the Converter and the performance of the device. Real-time control of plant and data monitoring and storage are the main objectives of the control system....

  6. Robotic and Survey Telescopes

    Science.gov (United States)

    Woźniak, Przemysław

    Robotic telescopes are revolutionizing the way astronomers collect their dataand conduct sky surveys. This chapter begins with a discussion of principles thatguide the process of designing, constructing, and operating telescopes andobservatories that offer a varying degree of automation, from instruments remotelycontrolled by observers to fully autonomous systems requiring no humansupervision during their normal operations. Emphasis is placed on designtrade-offs involved in building end-to-end systems intended for a wide range ofscience applications. The second part of the chapter contains descriptions ofseveral projects and instruments, both existing and currently under development.It is an attempt to provide a representative selection of actual systems thatillustrates state of the art in technology, as well as important ideas and milestonesin the development of the field. The list of presented instruments spans the fullrange in size starting from small all-sky monitors, through midrange robotic andsurvey telescopes, and finishing with large robotic instruments and surveys.Explosive growth of telescope networking is enabling entirely new modesof interaction between the survey and follow-up observing. Increasingimportance of standardized communication protocols and software is stressed.These developments are driven by the fusion of robotic telescope hardware,massive storage and databases, real-time knowledge extraction, and datacross-correlation on a global scale. The chapter concludes with examplesof major science results enabled by these new technologies and futureprospects.

  7. The Science of String Instruments

    CERN Document Server

    Rossing, Thomas D

    2010-01-01

    Many performing musicians, as well as instrument builders, are coming to realize the importance of understanding the science of musical instruments. This book explains how string instruments produce sound. It presents basic ideas in simple language, and it also translates some more sophisticated ideas in non-technical language. It should be of interest to performers, researchers, and instrument makers alike.

  8. Consistent Design of Dependable Control Systems

    DEFF Research Database (Denmark)

    Blanke, M.

    1996-01-01

    Design of fault handling in control systems is discussed, and a method for consistent design is presented.......Design of fault handling in control systems is discussed, and a method for consistent design is presented....

  9. Bicep2. III. INSTRUMENTAL SYSTEMATICS

    Energy Technology Data Exchange (ETDEWEB)

    Ade, P. A. R. [School of Physics and Astronomy, Cardiff University, Cardiff, CF24 3AA (United Kingdom); Aikin, R. W.; Bock, J. J.; Brevik, J. A.; Filippini, J. P.; Golwala, S. R.; Hildebrandt, S. R. [Department of Physics, California Institute of Technology, Pasadena, CA 91125 (United States); Barkats, D. [Joint ALMA Observatory, ESO, Santiago (Chile); Benton, S. J. [Department of Physics, University of Toronto, Toronto, ON (Canada); Bischoff, C. A.; Buder, I.; Karkare, K. S. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street MS 42, Cambridge, MA 02138 (United States); Bullock, E. [Minnesota Institute for Astrophysics, University of Minnesota, Minneapolis, MN 55455 (United States); Dowell, C. D. [Jet Propulsion Laboratory, Pasadena, CA 91109 (United States); Duband, L. [SBT, Commissariat à l’Energie Atomique, Grenoble (France); Fliescher, S. [Department of Physics, University of Minnesota, Minneapolis, MN 55455 (United States); Halpern, M.; Hasselfield, M. [Department of Physics and Astronomy, University of British Columbia, Vancouver, BC (Canada); Hilton, G. C.; Irwin, K. D., E-mail: csheehy@uchicago.edu [National Institute of Standards and Technology, Boulder, CO 80305 (United States); Collaboration: Bicep2 Collaboration; and others

    2015-12-01

    In a companion paper, we have reported a >5σ detection of degree scale B-mode polarization at 150 GHz by the Bicep2 experiment. Here we provide a detailed study of potential instrumental systematic contamination to that measurement. We focus extensively on spurious polarization that can potentially arise from beam imperfections. We present a heuristic classification of beam imperfections according to their symmetries and uniformities, and discuss how resulting contamination adds or cancels in maps that combine observations made at multiple orientations of the telescope about its boresight axis. We introduce a technique, which we call “deprojection,” for filtering the leading order beam-induced contamination from time-ordered data, and show that it reduces power in Bicep2's actual and null-test BB spectra consistent with predictions using high signal-to-noise beam shape measurements. We detail the simulation pipeline that we use to directly simulate instrumental systematics and the calibration data used as input to that pipeline. Finally, we present the constraints on BB contamination from individual sources of potential systematics. We find that systematics contribute BB power that is a factor of ∼10× below Bicep2's three-year statistical uncertainty, and negligible compared to the observed BB signal. The contribution to the best-fit tensor/scalar ratio is at a level equivalent to r = (3–6) × 10{sup −3}.

  10. San Juan implements one-man survey system

    Energy Technology Data Exchange (ETDEWEB)

    Andrae, S. (San Juan Coal Co., Waterflow, NM (United States))

    1994-07-01

    Describes the one-man survey system which has been implemented at the San Juan surface mine in northwestern New Mexico. The Geodimeter System 4000, produced by Geotronics of Sweden, consists of a tripod-mounted electronic total station and a range rod-mounted remote positioning unit (RPU). A radio link between the tripod-mounted total station and the RPU enables one person to control the instrument and collect data. At San Juan the system has been used to survey overburden removal and mining. Only in cases where the pits become very long, and control cannot be set in the pit, is a two-person crew used. The system is useful for surveys of compliance projects and lends itself well to regrading work. 3 photos.

  11. Instrument evaluation no. 10. Scanray radiation meter type 751

    CERN Document Server

    Burgess, P H; White, D F

    1978-01-01

    The various radiations encountered in radiological protection cover a wide range of energies and radiation measurements have to be carried out under an equally broad spectrum of environmental conditions. This report is one of a series intended to give information on the performance characteristics of radiological protection instruments, to assist in the selection of appropriate instruments for a given purpose, to interpret the results obtained with such instruments, and, in particular, to know the likely sources and magnitude of errors that might be associated with measurements in the field. The radiation, electrical and environmental characteristics of radiation protection instruments are considered together with those aspects of the construction which make an instrument convenient for routine use. To provide consistent criteria for instrument performance, the range of tests performed on any particular class of instrument, the test methods and the criteria of acceptable performance are based broadly on the a...

  12. Dysphagia evaluation practices: inconsistencies in clinical assessment and instrumental examination decision-making.

    Science.gov (United States)

    Mathers-Schmidt, Barbara A; Kurlinski, Mary

    2003-01-01

    The purpose of this study was to determine the nature of swallowing evaluation practices in western Washington, specifically in terms of (a) components of the clinical examination most commonly used, (b) consistency of clinical examination practices across clinicians, and (c) consistency of clinical decision-making (instrumental vs. noninstrumental) given specific patient scenarios. A 21-question survey was sent to 150 speech-language pathologists who provide services to dysphagia patients. Of the 72 (48%) surveys that were returned, 64 provided the data for the study. The results revealed that clinicians who responded to the survey differ somewhat regarding which components they include in a clinical examination of swallowing. There was a high degree of consistency for 11 of the 19 components. Inconsistency across clinicians was revealed in four areas: assessment of sensory function, assessment of the gag reflex, cervical auscultation, and assessment of trial swallows using compensatory techniques. Clinicians agreed in their recommendations on two of the six clinical case scenarios. In general, participating clinicians varied widely in their clinical decision-making. These findings are compared with other studies where variability in clinical practice has raised concerns.

  13. UC Merced NMR Instrumentation Acquisition

    Science.gov (United States)

    2015-06-18

    UC Merced NMR Instrumentation Acquisition For the UC Merced NMR Instrumentation Acquisition proposal, a new 400 MHz and an upgraded 500 MHz NMR ...UC Merced NMR Instrumentation Acquisition Report Title For the UC Merced NMR Instrumentation Acquisition proposal, a new 400 MHz and an upgraded 500...MHz NMR have been delivered, installed, and incorporated into research and two lab courses. While no results from these instruments have been

  14. netherland hydrological modeling instrument

    Science.gov (United States)

    Hoogewoud, J. C.; de Lange, W. J.; Veldhuizen, A.; Prinsen, G.

    2012-04-01

    Netherlands Hydrological Modeling Instrument A decision support system for water basin management. J.C. Hoogewoud , W.J. de Lange ,A. Veldhuizen , G. Prinsen , The Netherlands Hydrological modeling Instrument (NHI) is the center point of a framework of models, to coherently model the hydrological system and the multitude of functions it supports. Dutch hydrological institutes Deltares, Alterra, Netherlands Environmental Assessment Agency, RWS Waterdienst, STOWA and Vewin are cooperating in enhancing the NHI for adequate decision support. The instrument is used by three different ministries involved in national water policy matters, for instance the WFD, drought management, manure policy and climate change issues. The basis of the modeling instrument is a state-of-the-art on-line coupling of the groundwater system (MODFLOW), the unsaturated zone (metaSWAP) and the surface water system (MOZART-DM). It brings together hydro(geo)logical processes from the column to the basin scale, ranging from 250x250m plots to the river Rhine and includes salt water flow. The NHI is validated with an eight year run (1998-2006) with dry and wet periods. For this run different parts of the hydrology have been compared with measurements. For instance, water demands in dry periods (e.g. for irrigation), discharges at outlets, groundwater levels and evaporation. A validation alone is not enough to get support from stakeholders. Involvement from stakeholders in the modeling process is needed. There fore to gain sufficient support and trust in the instrument on different (policy) levels a couple of actions have been taken: 1. a transparent evaluation of modeling-results has been set up 2. an extensive program is running to cooperate with regional waterboards and suppliers of drinking water in improving the NHI 3. sharing (hydrological) data via newly setup Modeling Database for local and national models 4. Enhancing the NHI with "local" information. The NHI is and has been used for many

  15. Developments in analytical instrumentation

    Science.gov (United States)

    Petrie, G.

    The situation regarding photogrammetric instrumentation has changed quite dramatically over the last 2 or 3 years with the withdrawal of most analogue stereo-plotting machines from the market place and their replacement by analytically based instrumentation. While there have been few new developments in the field of comparators, there has been an explosive development in the area of small, relatively inexpensive analytical stereo-plotters based on the use of microcomputers. In particular, a number of new instruments have been introduced by manufacturers who mostly have not been associated previously with photogrammetry. Several innovative concepts have been introduced in these small but capable instruments, many of which are aimed at specialised applications, e.g. in close-range photogrammetry (using small-format cameras); for thematic mapping (by organisations engaged in environmental monitoring or resources exploitation); for map revision, etc. Another innovative and possibly significant development has been the production of conversion kits to convert suitable analogue stereo-plotting machines such as the Topocart, PG-2 and B-8 into fully fledged analytical plotters. The larger and more sophisticated analytical stereo-plotters are mostly being produced by the traditional mainstream photogrammetric systems suppliers with several new instruments and developments being introduced at the top end of the market. These include the use of enlarged photo stages to handle images up to 25 × 50 cm format; the complete integration of graphics workstations into the analytical plotter design; the introduction of graphics superimposition and stereo-superimposition; the addition of correlators for the automatic measurement of height, etc. The software associated with this new analytical instrumentation is now undergoing extensive re-development with the need to supply photogrammetric data as input to the more sophisticated G.I.S. systems now being installed by clients, instead

  16. TROPOMI and TROPI: UV/VIS/NIR/SWIR instruments

    NARCIS (Netherlands)

    Levelt, P.F.; Oord, G.H.J. van den; Dobber, M.; Eskes, H.; Weele, M. van; Veefkind, P.; Oss, R. van; Aben, I.; Jongma, R.T.; Landgraf, J.; Vries, J. de; Visser, H.

    2006-01-01

    TROPOMI (Tropospheric Ozone-Monitoring Instrument) is a five-channel UV-VIS-NIR-SWIR non-scanning nadir viewing imaging spectrometer that combines a wide swath (114°) with high spatial resolution (10 × 10 km 2). The instrument heritage consists of GOME on ERS-2, SCIAMACHY on Envisat and, especially,

  17. TROPOMI and TROPI: UV/VIS/NIR/SWIR instruments

    NARCIS (Netherlands)

    Levelt, P.F.; Oord, G.H.J. van den; Dobber, M.; Eskes, H.; Weele, M. van; Veefkind, P.; Oss, R. van; Aben, I.; Jongma, R.T.; Landgraf, J.; Vries, J. de; Visser, H.

    2006-01-01

    TROPOMI (Tropospheric Ozone-Monitoring Instrument) is a five-channel UV-VIS-NIR-SWIR non-scanning nadir viewing imaging spectrometer that combines a wide swath (114°) with high spatial resolution (10 × 10 km 2). The instrument heritage consists of GOME on ERS-2, SCIAMACHY on Envisat and, especially,

  18. Teacher Performance Assessment Instruments: Plans for Practice Rating.

    Science.gov (United States)

    Capie, William; And Others

    This manual consists of lesson plans developed to train data collectors in the use of the Teacher Performance Assessment Instruments (TPAI). Each set of plans was designed for one of three purposes. Lesson plans developed for the Teaching Plans and Materials Instrument (TPM) simulate a portfolio prepared by the teacher. One-day plans developed for…

  19. "The Burden of Pregnancy"; heavier for the heaviest? The changes in Health Related Quality of Life (HRQoL) assessed by the 15D instrument during pregnancy and postpartum in different body mass index groups: a longitudinal survey.

    Science.gov (United States)

    Sahrakorpi, Niina; Koivusalo, Saila B; Stach-Lempinen, Beata; Eriksson, Johan G; Kautiainen, Hannu; Roine, Risto P

    2017-03-01

    Only little information is available on health-related quality of life (HRQoL) and its changes during the course of a normal pregnancy. We studied changes in HRQoL in a pregnant population during pregnancy and until 1 year postpartum in different body mass index (BMI) groups. Seven hundred and fifty pregnant women attending the first ultrasound examination before gestational week 14 were invited to participate in a longitudinal, communal-based survey. The participants were divided into three groups according to their BMI; <25, 25-29.9, and ≥30 kg/m(2) . The women were asked to fill in questionnaires assessing HRQoL (15D), depressive symptoms (Edinburgh Depression Scale, EPDS), medical, obstetric and socioeconomic status at baseline. HRQoL and EPDS were re-assessed at 30 weeks of gestation, and 6 weeks, 3 and 12 months postpartum. Of the invited 750 mothers, 325 (43%) returned the questionnaires and at least one follow-up questionnaire. At baseline, mean 15D scores decreased with increasing BMI but the difference was not statistically significant when adjusted for age, educational attainment, parity or EPDS-scores (0.929, 0.921 and 0.916, p = 0.16). During the course of pregnancy, the HRQoL of all women decreased but this decrease was significantly greater in the obese group (-0.088; 95% CI -0.110 to -0.065) than in the other groups [-0.054 (95% CI -0.062 to -0.045) and -0.051 (95% CI -0.068 to -0.033), p = 0.019]. Within 3 months postpartum the mean HRQoL recovered in all BMI groups to baseline levels, irrespective of the mode of delivery or pregnancy-related complications. The burden of pregnancy is heavier for the heaviest. © 2016 Nordic Federation of Societies of Obstetrics and Gynecology.

  20. The development and validation of a scientific attitudes and attitudes toward evolution and creation instrument for Christian college biology students

    Science.gov (United States)

    Tenneson, Michael Gunnar

    2002-01-01

    This study reports on the development of a valid and reliable survey instrument to be used by college biology teachers at Christian colleges to evaluate the scientific attitudes and the attitudes about evolution and attitudes about creationism of their students. Survey questions were largely derived from student responses to open ended interview questions. Content validity was strong as indicated by agreement among content experts through the use of a content validity rating form. Construct validity was examined through the use of principal components analysis of 165 survey responses. Four factors were identified as a result of this analysis: "evolution support," "views of how scientists think/operate," "scientific attitudes," and "hypotheses and theories." These factors were found to be consistent with the three theoretical constructs of scientific attitudes, attitudes about evolution, and attitudes about creationism. Overall instrument reliability, Cronbach's reliability coefficient, alpha, was determined to be 0.64 (N = 165). Readability was found to be at the 7 th grade level. The instrument should be comprehensible by college students.

  1. A Life in the Universe Survey

    Science.gov (United States)

    LoPresto, Michael C.; Hubble-Zdanowski, Jennifer

    2012-01-01

    The "Life in the Universe Survey" is a twelve-question assessment instrument. Largely based on the factors of the Drake equation, it is designed to survey students' initial estimates of its factors and to gauge how estimates change with instruction. The survey was used in sections of a seminar course focusing specifically on life in the universe…

  2. A Life in the Universe Survey

    Science.gov (United States)

    LoPresto, Michael C.; Hubble-Zdanowski, Jennifer

    2012-01-01

    The "Life in the Universe Survey" is a twelve-question assessment instrument. Largely based on the factors of the Drake equation, it is designed to survey students' initial estimates of its factors and to gauge how estimates change with instruction. The survey was used in sections of a seminar course focusing specifically on life in the universe…

  3. Development and Psychometric Evaluation of an Instrument to Assess Cross-Cultural Competence of Healthcare Professionals (CCCHP).

    Science.gov (United States)

    Bernhard, Gerda; Knibbe, Ronald A; von Wolff, Alessa; Dingoyan, Demet; Schulz, Holger; Mösko, Mike

    2015-01-01

    Cultural competence of healthcare professionals (HCPs) is recognized as a strategy to reduce cultural disparities in healthcare. However, standardised, valid and reliable instruments to assess HCPs' cultural competence are notably lacking. The present study aims to 1) identify the core components of cultural competence from a healthcare perspective, 2) to develop a self-report instrument to assess cultural competence of HCPs and 3) to evaluate the psychometric properties of the new instrument. The conceptual model and initial item pool, which were applied to the cross-cultural competence instrument for the healthcare profession (CCCHP), were derived from an expert survey (n = 23), interviews with HCPs (n = 12), and a broad narrative review on assessment instruments and conceptual models of cultural competence. The item pool was reduced systematically, which resulted in a 59-item instrument. A sample of 336 psychologists, in advanced psychotherapeutic training, and 409 medical students participated, in order to evaluate the construct validity and reliability of the CCCHP. Construct validity was supported by principal component analysis, which led to a 32-item six-component solution with 50% of the total variance explained. The different dimensions of HCPs' cultural competence are: Cross-Cultural Motivation/Curiosity, Cross-Cultural Attitudes, Cross-Cultural Skills, Cross-Cultural Knowledge/Awareness and Cross-Cultural Emotions/Empathy. For the total instrument, the internal consistency reliability was .87 and the dimension's Cronbach's α ranged from .54 to .84. The discriminating power of the CCCHP was indicated by statistically significant mean differences in CCCHP subscale scores between predefined groups. The 32-item CCCHP exhibits acceptable psychometric properties, particularly content and construct validity to examine HCPs' cultural competence. The CCCHP with its five dimensions offers a comprehensive assessment of HCPs' cultural competence, and has the

  4. Radiometric calibration stability and inter-calibration of solar-band instruments in orbit using the moon

    Science.gov (United States)

    Stone, T.C.

    2008-01-01

    With the increased emphasis on monitoring the Earth's climate from space, more stringent calibration requirements are being placed on the data products from remote sensing satellite instruments. Among these are stability over decade-length time scales and consistency across sensors and platforms. For radiometer instruments in the solar reflectance wavelength range (visible to shortwave infrared), maintaining calibration on orbit is difficult due to the lack of absolute radiometric standards suitable for flight use. The Moon presents a luminous source that can be viewed by all instruments in Earth orbit. Considered as a solar diffuser, the lunar surface is exceedingly stable. The chief difficulty with using the Moon is the strong variations in the Moon's brightness with illumination and viewing geometry. This mandates the use of a photometric model to compare lunar observations, either over time by the same instrument or between instruments. The U.S. Geological Survey in Flagstaff, Arizona, under NASA sponsorship, has developed a model for the lunar spectral irradiance that explicitly accounts for the effects of phase, the lunar librations, and the lunar surface reflectance properties. The model predicts variations in the Moon's brightness with precision ???1% over a continuous phase range from eclipse to the quarter lunar phases. Given a time series of Moon observations taken by an instrument, the geometric prediction capability of the lunar irradiance model enables sensor calibration stability with sub-percent per year precision. Cross-calibration of instruments with similar passbands can be achieved with precision comparable to the model precision. Although the Moon observations used for intercomparison can be widely separated in phase angle and/or time, SeaWiFS and MODIS have acquired lunar views closely spaced in time. These data provide an example to assess inter-calibration biases between these two instruments.

  5. Instrumentation problems for physicians.

    Science.gov (United States)

    Turner, G O

    1980-01-01

    The physician has, for whatever reasons, diminished his or her level of involvement on the team dedicated to developing, refining, and evaluating medical technology. As a result, the challenge confronting the physician and the technology development team today is to orchestrate a team structure that will ensure the greatest input and commitment from physicians and other professionals during current and future technology development. The charges of cost escalation and dehumanization in our system of health care delivery will also be discussed, as will the lack of, or confusion about, access to data concerning cost of a given instrument, and fuzzy semantics and perspectives on technology and instrumentation. The author suggests answers to, or means to ameliorate, the problems.

  6. KEKB beam instrumentation systems

    Science.gov (United States)

    Arinaga, M.; Flanagan, J.; Hiramatsu, S.; Ieiri, T.; Ikeda, H.; Ishii, H.; Kikutani, E.; Mimashi, T.; Mitsuhashi, T.; Mizuno, H.; Mori, K.; Tejima, M.; Tobiyama, M.

    2003-02-01

    For the stable high-luminosity operation and luminosity increase, the electron and positron storage rings of the KEK B-Factory (KEKB) is equipped with various beam instrumentations, which have been working well since the start of the commissioning in December, 1998. Details and performance of the beam-position monitor system based on the spectrum analysis using DSPs, the turn-by-turn BPM with four-dimensional function available for measurements of the individual bunch position, phase and intensity, the parametric beam-DCCTs designed so as to avoid the magnetic-core-selection problems for the parametric flux modulation, the bunch-by-bunch feedback system indispensable to suppress the strong multibunch instabilities in KEKB, the various optical beam diagnostic systems, such as synchrotron radiation interferometers for precise beam-size measurement, the tune meters, the bunch length monitors and the beam-loss monitors are described. Delicate machine tuning of KEKB is strongly supported by these instrumentations.

  7. Data acquisition instruments: Psychopharmacology

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, D.S. III

    1998-01-01

    This report contains the results of a Direct Assistance Project performed by Lockheed Martin Energy Systems, Inc., for Dr. K. O. Jobson. The purpose of the project was to perform preliminary analysis of the data acquisition instruments used in the field of psychiatry, with the goal of identifying commonalities of data and strategies for handling and using the data in the most advantageous fashion. Data acquisition instruments from 12 sources were provided by Dr. Jobson. Several commonalities were identified and a potentially useful data strategy is reported here. Analysis of the information collected for utility in performing diagnoses is recommended. In addition, further work is recommended to refine the commonalities into a directly useful computer systems structure.

  8. An ice lithography instrument

    Science.gov (United States)

    Han, Anpan; Chervinsky, John; Branton, Daniel; Golovchenko, J. A.

    2011-06-01

    We describe the design of an instrument that can fully implement a new nanopatterning method called ice lithography, where ice is used as the resist. Water vapor is introduced into a scanning electron microscope (SEM) vacuum chamber above a sample cooled down to 110 K. The vapor condenses, covering the sample with an amorphous layer of ice. To form a lift-off mask, ice is removed by the SEM electron beam (e-beam) guided by an e-beam lithography system. Without breaking vacuum, the sample with the ice mask is then transferred into a metal deposition chamber where metals are deposited by sputtering. The cold sample is then unloaded from the vacuum system and immersed in isopropanol at room temperature. As the ice melts, metal deposited on the ice disperses while the metals deposited on the sample where the ice had been removed by the e-beam remains. The instrument combines a high beam-current thermal field emission SEM fitted with an e-beam lithography system, cryogenic systems, and a high vacuum metal deposition system in a design that optimizes ice lithography for high throughput nanodevice fabrication. The nanoscale capability of the instrument is demonstrated with the fabrication of nanoscale metal lines.

  9. Impact dynamics instrumentation

    Science.gov (United States)

    Mccormck, R. F.

    1986-01-01

    One of the tasks specified in the NASA Langley controlled impact demonstration (CID) work package was to furnish dynamic instrumentation sensors. The types of instrumentation sensors required were accelerometers for aircraft structural loads measurements, seat belt load cells to measure anthropomorphic dummy responses to the aircraft impact, and strain gage bending bridges to measure the aircraft fuselage and wing bending during impact. The objective in the selection of dynamic instrumentation for the CID was to provide 352 of the highest quality transducers and remain within budget allocation. The transducers that were selected for the CID evaluation process were each subjected to rigorous laboratory acceptance tests and to aircraft fuselage section drop tests at the LaRC Impact Dynamics Research Facility. Data compiled from this series of tests showed the selected transducers to be best suited for the CID mission requirement. The transducers installation technique on the airframe proved successful. The transducer quality assurance was guaranteed through rigorous acceptance testing. Data acquired was 97.0%.

  10. Survey of photovoltaic systems

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-01

    In developing this survey of photovoltaic systems, the University of Alabama in Huntsville assembled a task team to perform an extensive telephone survey of all known photovoltaic manufacturers. Three US companies accounted for 77% of the total domestic sales in 1978. They are Solarex Corporation, Solar Power Croporation, and ARCO Solar, Inc. This survey of solar photovoltaic (P/V) manufacturers and suppliers consists of three parts: a catalog of suppliers arranged alphabetically, data sheets on specific products, and typical operating, installation, or maintenance instructions and procedures. This report does not recommend or endorse any company product or information presented within as the results of this survey.

  11. Advancements in Actuated Musical Instruments

    DEFF Research Database (Denmark)

    Overholt, Daniel; Berdahl, Edgar; Hamilton, Robert

    2011-01-01

    This article presents recent developments in actuated musical instruments created by the authors, who also describe an ecosystemic model of actuated performance activities that blur traditional boundaries between the physical and virtual elements of musical interfaces. Actuated musical instrument...... that these instruments enable. We look at some of the conceptual and perceptual issues introduced by actuated musical instruments, and finally we propose some directions in which such research may be headed in the future.......This article presents recent developments in actuated musical instruments created by the authors, who also describe an ecosystemic model of actuated performance activities that blur traditional boundaries between the physical and virtual elements of musical interfaces. Actuated musical instruments...... are physical instruments that have been endowed with virtual qualities controlled by a computer in real-time but which are nevertheless tangible. These instruments provide intuitive and engaging new forms of interaction. They are different from traditional (acoustic) and fully automated (robotic) instruments...

  12. FHR Process Instruments

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL

    2015-01-01

    Fluoride salt-cooled High temperature Reactors (FHRs) are entering into early phase engineering development. Initial candidate technologies have been identified to measure all of the required process variables. The purpose of this paper is to describe the proposed measurement techniques in sufficient detail to enable assessment of the proposed instrumentation suite and to support development of the component technologies. This paper builds upon the instrumentation chapter of the recently published FHR technology development roadmap. Locating instruments outside of the intense core radiation and high-temperature fluoride salt environment significantly decreases their environmental tolerance requirements. Under operating conditions, FHR primary coolant salt is a transparent, low-vapor-pressure liquid. Consequently, FHRs can employ standoff optical measurements from above the salt pool to assess in-vessel conditions. For example, the core outlet temperature can be measured by observing the fuel s blackbody emission. Similarly, the intensity of the core s Cerenkov glow indicates the fission power level. Short-lived activation of the primary coolant provides another means for standoff measurements of process variables. The primary coolant flow and neutron flux can be measured using gamma spectroscopy along the primary coolant piping. FHR operation entails a number of process measurements. Reactor thermal power and core reactivity are the most significant variables for process control. Thermal power can be determined by measuring the primary coolant mass flow rate and temperature rise across the core. The leading candidate technologies for primary coolant temperature measurement are Au-Pt thermocouples and Johnson noise thermometry. Clamp-on ultrasonic flow measurement, that includes high-temperature tolerant standoffs, is a potential coolant flow measurement technique. Also, the salt redox condition will be monitored as an indicator of its corrosiveness. Both

  13. MDCC: Multi-Data Center Consistency

    CERN Document Server

    Kraska, Tim; Franklin, Michael J; Madden, Samuel

    2012-01-01

    Replicating data across multiple data centers not only allows moving the data closer to the user and, thus, reduces latency for applications, but also increases the availability in the event of a data center failure. Therefore, it is not surprising that companies like Google, Yahoo, and Netflix already replicate user data across geographically different regions. However, replication across data centers is expensive. Inter-data center network delays are in the hundreds of milliseconds and vary significantly. Synchronous wide-area replication is therefore considered to be unfeasible with strong consistency and current solutions either settle for asynchronous replication which implies the risk of losing data in the event of failures, restrict consistency to small partitions, or give up consistency entirely. With MDCC (Multi-Data Center Consistency), we describe the first optimistic commit protocol, that does not require a master or partitioning, and is strongly consistent at a cost similar to eventually consiste...

  14. A dual-consistency cache coherence protocol

    OpenAIRE

    Ros, Alberto; Jimborean, Alexandra

    2015-01-01

    Weak memory consistency models can maximize system performance by enabling hardware and compiler optimizations, but increase programming complexity since they do not match programmers’ intuition. The design of an efficient system with an intuitive memory model is an open challenge. This paper proposes SPEL, a dual-consistency cache coherence protocol which simultaneously guarantees the strongest memory consistency model provided by the hardware and yields improvements in both performance and ...

  15. Consistency and sealing of advanced bipolar tissue sealers.

    Science.gov (United States)

    Chekan, Edward G; Davison, Mark A; Singleton, David W; Mennone, John Z; Hinoul, Piet

    2015-01-01

    The aim of this study was to evaluate two commonly used advanced bipolar devices (ENSEAL(®) G2 Tissue Sealers and LigaSure™ Blunt Tip) for compression uniformity, vessel sealing strength, and consistency in bench-top analyses. Compression analysis was performed with a foam pad/sensor apparatus inserted between closed jaws of the instruments. Average pressures (psi) were recorded across the entire inside surface of the jaws, and over the distal one-third of jaws. To test vessel sealing strength, ex vivo pig carotid arteries were sealed and transected and left and right (sealed) halves of vessels were subjected to burst pressure testing. The maximum bursting pressures of each half of vessels were averaged to obtain single data points for analysis. The absence or presence of tissue sticking to device jaws was noted for each transected vessel. Statistically higher average compression values were found for ENSEAL(®) instruments (curved jaw and straight jaw) compared to LigaSure™, Pbench-top testing, ENSEAL(®) G2 sealers produced more uniform compression, stronger and more consistent vessel sealing, and reduced tissue sticking relative to LigaSure™.

  16. The Basic Design Report of the 40M SANS Instrument

    Energy Technology Data Exchange (ETDEWEB)

    Han, Young Soo; Lee, Chang Hee; Hwang, Dong Gil; Kim, Hak Rho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Tae Hwan; Choi, Sung Min [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2006-04-15

    The HANARO cold neutron research facility project was launched on July 1, 2003. A state of the art SANS instrument was selected as a top-priority instrument by an instrument selection committee, which consisted of domestic users and HANARO personnel. An instrument development team and an international and domestic instrument advisory team were formulated. The guide and the instrument simulation were performed using Vitess software and the optimum basic design was completed based on the simulation results and the international advisory team reviews. The optimum design of the guide for the 40M SANS instrument was completed and the optimum basic design of the 40M the SANS instrument was also completed based on the Vitess simulation results. The Q range of the instrument will cover from 0.0008 to 1.0 A-1 and the maximum flux at a sample position can reach about 5.5x10 7 n/cm2sec. The simulation results and the basic design product will be used for the detailed design and the construction of the SANS instrument. The simulation results could be applied to the development of the other instrument.

  17. A new approach to hull consistency

    Directory of Open Access Journals (Sweden)

    Kolev Lubomir

    2016-06-01

    Full Text Available Hull consistency is a known technique to improve the efficiency of iterative interval methods for solving nonlinear systems describing steady-states in various circuits. Presently, hull consistency is checked in a scalar manner, i.e. successively for each equation of the nonlinear system with respect to a single variable. In the present poster, a new more general approach to implementing hull consistency is suggested which consists in treating simultaneously several equations with respect to the same number of variables.

  18. Satisfaction measurement instruments for healthcare service users: a systematic review

    Directory of Open Access Journals (Sweden)

    Renato Santos de Almeida

    2015-01-01

    Full Text Available Patient satisfaction surveys can be an interesting way to improve quality and discuss the concept of patient-centered care. This study aimed to conduct a systematic review of the validated patient satisfaction measurement instruments applied in healthcare. The systematic review searched the MEDLINE/PubMed, LILACS, SciELO, Scopus and Web of Knowledge. The search strategy used the terms: "Patient Satisfaction" AND "Patient centered care" AND "Healthcare survey OR Satisfaction questionnaire" AND "Psychometric properties". 37 studies were included and almost all studies showed that satisfaction is a multidimensional construct. In these studies, 34 different instruments were used and most surveys contained the dimension patient-healthcare professional interactions, physical environment and management process. The COSMIN score for methodological quality showed that most of them scored a good or fair average. We can conclude that there is not a gold standard instrument for patient satisfaction assessment but some dimensions are essential for this construct.

  19. Preventing intentional food contamination: a survey to assess restaurant preparedness.

    Science.gov (United States)

    Xirasagar, Sudha; Kanwat, C P; Qu, Haiyan; Smith, Lillian U; Patterson, Nathaniel J; Shewchuk, Richard M

    2010-01-01

    In the age of preparedness, public health agencies are concerned with intentional acts of food contamination in restaurants, in addition to food safety. Food safety consists of applying standard norms of practice and infrastructure, which, if violated, cause food-borne illness. In contrast, food defense requires an institutionalized mindset of informed alertness to unusual variations from the norms, combined with preemptive practices best suited to each restaurant. Therefore, while food safety lends itself to regulation to ensure standard practices, food defense is best served by advisory guidelines for autonomous application, preserving the restaurant industry's core values of hospitality and customer service. To address this challenge, public health agencies need survey tools that can yield action-relevant data on the knowledge and practice gaps in food defense preparedness and on educational messages and support services to be developed for maximum impact potential. This article presents a mail survey instrument, developed using qualitative research to ensure content and face validity. Instrument development involved drafting the survey on the basis of expert consultations, validating its content by using focus groups (representing all restaurant categories and geographic regions), and ensuring face validity through cognitive interviews. The resulting survey remains sensitive to the hospitality industry while encompassing all vulnerable points.

  20. Direct observation of a submarine volcanic eruption from a sea-floor instrument caught in a lava flow.

    Science.gov (United States)

    Fox, C G; Chadwick, W W; Embley, R W

    2001-08-16

    Our understanding of submarine volcanic eruptions has improved substantially in the past decade owing to the recent ability to remotely detect such events and to then respond rapidly with synoptic surveys and sampling at the eruption site. But these data are necessarily limited to observations after the event. In contrast, the 1998 eruption of Axial volcano on the Juan de Fuca ridge was monitored by in situ sea-floor instruments. One of these instruments, which measured bottom pressure as a proxy for vertical deformation of the sea floor, was overrun and entrapped by the 1998 lava flow. The instrument survived-being insulated from the molten lava by the solidified crust-and was later recovered. The data serendipitously recorded by this instrument reveal the duration, character and effusion rate of a sheet flow eruption on a mid-ocean ridge, and document over three metres of lava-flow inflation and subsequent drain-back. After the brief two-hour eruption, the instrument also measured gradual subsidence of 1.4 metres over the next several days, reflecting deflation of the entire volcano summit as magma moved into the adjacent rift zone. These findings are consistent with our understanding of submarine lava effusion, as previously inferred from seafloor observations, terrestrial analogues, and laboratory simulations.

  1. Measuring Instrument Constructs of Return Factors for Green Office Building Investments Variables Using Rasch Measurement Model

    Directory of Open Access Journals (Sweden)

    Isa Mona

    2016-01-01

    Full Text Available This paper is a preliminary study on rationalising green office building investments in Malaysia. The aim of this paper is attempt to introduce the application of Rasch measurement model analysis to determine the validity and reliability of each construct in the questionnaire. In achieving this objective, a questionnaire survey was developed consists of 6 sections and a total of 106 responses were received from various investors who own and lease office buildings in Kuala Lumpur. The Rasch Measurement analysis is used to measure the quality control of item constructs in the instrument by measuring the specific objectivity within the same dimension, to reduce ambiguous measures, and a realistic estimation of precision and implicit quality. The Rasch analysis consists of the summary statistics, item unidimensionality and item measures. A result shows the items and respondent (person reliability is at 0.91 and 0.95 respectively.

  2. THOR Electric Field Instrument - EFI

    Science.gov (United States)

    Khotyaintsev, Yuri; Bale, Stuart D.; Rothkaehl, Hanna; Bonnell, John; Åhlen, Lennart; Vaivads, Andris; Lindqvist, Per-Arne; Ivchenko, Nickolay; Soucek, Jan

    2017-04-01

    Turbulence Heating ObserveR (THOR) is the first mission ever flown in space dedicated to plasma turbulence. The Electric Field Instrument (EFI) is to measure the electric field vector in the frequency range 0-200 kHz. EFI consists of two sets of sensors: Spin-plane Double Probes (EFI-SDP) providing high sensitivity DC electric field in the spacecraft spin plane (2D), and the High-Frequency Antenna (EFI-HFA) providing 3D electric field at frequencies above 1 kHz. EFI-SDP consists of 4 biased spherical probes extended on 50 m long wire booms, 90 degrees apart in the spin plane, giving a 100 m baseline for each of the two spin-plane electric field components. EFI-HFA consists of 6 x 1.25 m long monopoles, forming 3 dipolar antennas crossed at 90 degrees to each other. In addition to the sensors, EFI contains HFA and SDP pre-amplifiers, as well as bias electronics boards (BEBs) hosted in the man electronics box of the Field and Wave processor (FWP). As THOR spacecraft has a sun-pointing spin axis, EFI-SDP measures the electric field in the plane approximately orthogonal to the sun using long wire booms. The sun-pointing attitude greatly reduces errors due to wake effects and asymmetric photoelectron clouds, enabling the highly accurate in comparison to earlier missions ±0.1 mV/m near-DC electric field measurements. Interferometry using the electric field probes can be used to infer wavelengths and scale sizes at the smallest scales in the plasma. EFI also measures the floating potential of the satellite, which can be used to estimate the plasma density at very high time resolution (up to a few hundred Hz). The sun-pointing attitude greatly reduces changes in the illuminated area, and hence the associated spin-dependent errors. In combination with densities derived from the observed plasma frequency emission line, EFI monitors the plasma density from DC to a few hundred Hz. EFI measurements characterize electric field and density variations associated with kinetic

  3. Tool – Material, Metaphor – Metonymy, Instrument(ness)

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Breinbjerg, Morten; Pold, Søren

    2008-01-01

    This paper, presents in an abbreviated form the argument presented in an earlier paper[1], and tries to relate it to the theme, "retro in the interface". We introduce the concept instrumentness as a quality of human-computer interfaces. Instrumentness points to the way musical instruments are con...

  4. Consistent estimators in random censorship semiparametric models

    Institute of Scientific and Technical Information of China (English)

    王启华

    1996-01-01

    For the fixed design regression modelwhen Y, are randomly censored on the right, the estimators of unknown parameter and regression function g from censored observations are defined in the two cases .where the censored distribution is known and unknown, respectively. Moreover, the sufficient conditions under which these estimators are strongly consistent and pth (p>2) mean consistent are also established.

  5. Student Effort, Consistency, and Online Performance

    Science.gov (United States)

    Patron, Hilde; Lopez, Salvador

    2011-01-01

    This paper examines how student effort, consistency, motivation, and marginal learning, influence student grades in an online course. We use data from eleven Microeconomics courses taught online for a total of 212 students. Our findings show that consistency, or less time variation, is a statistically significant explanatory variable, whereas…

  6. Consistent truncations with massive modes and holography

    CERN Document Server

    Cassani, Davide; Faedo, Anton F

    2011-01-01

    We review the basic features of some recently found consistent Kaluza-Klein truncations including massive modes. We emphasize the general ideas underlying the reduction procedure, then we focus on type IIB supergravity on 5-dimensional manifolds admitting a Sasaki-Einstein structure, which leads to half-maximal gauged supergravity in five dimensions. Finally, we comment on the holographic picture of consistency.

  7. CONSISTENT AGGREGATION IN FOOD DEMAND SYSTEMS

    OpenAIRE

    Levedahl, J. William; Reed, Albert J.; Clark, J. Stephen

    2002-01-01

    Two aggregation schemes for food demand systems are tested for consistency with the Generalized Composite Commodity Theorem (GCCT). One scheme is based on the standard CES classification of food expenditures. The second scheme is based on the Food Guide Pyramid. Evidence is found that both schemes are consistent with the GCCT.

  8. A Framework of Memory Consistency Models

    Institute of Scientific and Technical Information of China (English)

    胡伟武; 施巍松; 等

    1998-01-01

    Previous descriptions of memory consistency models in shared-memory multiprocessor systems are mainly expressed as constraints on the memory access event ordering and hence are hardware-centric.This paper presents a framework of memory consistency models which describes the memory consistency model on the behavior level.Based on the understanding that the behavior of an execution is determined by the execution order of conflicting accesses,a memory consistency model is defined as an interprocessor synchronization mechanism which orders the execution of operations from different processors.Synchronization order of an execution under certain consistency model is also defined.The synchronization order,together with the program order determines the behavior of an execution.This paper also presents criteria for correct program and correct implementation of consistency models.Regarding an implementation of a consistency model as certain memory event ordering constraints,this paper provides a method to prove the correctness of consistency model implementations,and the correctness of the lock-based cache coherence protocol is proved with this method.

  9. Sticky continuous processes have consistent price systems

    DEFF Research Database (Denmark)

    Bender, Christian; Pakkanen, Mikko; Sayit, Hasanjan

    Under proportional transaction costs, a price process is said to have a consistent price system, if there is a semimartingale with an equivalent martingale measure that evolves within the bid-ask spread. We show that a continuous, multi-asset price process has a consistent price system, under arb...

  10. Testing the visual consistency of web sites

    NARCIS (Netherlands)

    Geest, van der Thea; Loorbach, Nicole

    2005-01-01

    Consistency in the visual appearance of Web pages is often checked by experts, such as designers or reviewers. This article reports a card sort study conducted to determine whether users rather than experts could distinguish visual (in-)consistency in Web elements and pages. The users proved to agre

  11. Putting Consistent Theories Together in Institutions

    Institute of Scientific and Technical Information of China (English)

    应明生

    1995-01-01

    The problem of putting consistent theories together in institutions is discussed.A general necessary condition for consistency of the resulting theory is carried out,and some sufficient conditions are given for diagrams of theories in which shapes are tree bundles or directed graphs.Moreover,some transformations from complicated cases to simple ones are established.

  12. Modeling and Testing Legacy Data Consistency Requirements

    DEFF Research Database (Denmark)

    Nytun, J. P.; Jensen, Christian Søndergaard

    2003-01-01

    An increasing number of data sources are available on the Internet, many of which offer semantically overlapping data, but based on different schemas, or models. While it is often of interest to integrate such data sources, the lack of consistency among them makes this integration difficult....... This paper addresses the need for new techniques that enable the modeling and consistency checking for legacy data sources. Specifically, the paper contributes to the development of a framework that enables consistency testing of data coming from different types of data sources. The vehicle is UML and its...... accompanying XMI. The paper presents techniques for modeling consistency requirements using OCL and other UML modeling elements: it studies how models that describe the required consistencies among instances of legacy models can be designed in standard UML tools that support XMI. The paper also considers...

  13. Payment Instrument Characteristics

    DEFF Research Database (Denmark)

    Holst, Jacques; Kjeldsen, Martin; Hedman, Jonas;

    2015-01-01

    Over the last decade, we have witnessed payment innovations that fundamentally have changed the ways we pay. Payment innovations, such as mobile payments and on-line banking, include characteristics or features that are essential to understand if we want to know how and why payers choose among...... payment innovations. Using the Repertory Grid technique to explore 15 payers’ perception of six payment instruments, including coins, banknotes, debit cards, credit cards, mobile payments, and on-line banking, we identify 16 payment characteristics. The characteristics aggregate seventy-six unique...

  14. Beam Instrumentation and Diagnostics

    CERN Document Server

    Strehl, Peter

    2006-01-01

    This treatise covers all aspects of the design and the daily operations of a beam diagnostic system for a large particle accelerator. A very interdisciplinary field, it involves contributions from physicists, electrical and mechanical engineers and computer experts alike so as to satisfy the ever-increasing demands for beam parameter variability for a vast range of operation modi and particles. The author draws upon 40 years of research and work, most of them spent as the head of the beam diagnostics group at GSI. He has illustrated the more theoretical aspects with many real-life examples that will provide beam instrumentation designers with ideas and tools for their work.

  15. Pesticide reducing instruments

    DEFF Research Database (Denmark)

    Jacobsen, Lars-Bo; Jensen, Jørgen Dejgård; Andersen, Martin

    2005-01-01

    the cost and to calculate general economic and sectoral consequences. This CGE model is linked to an agricultural sector model calculating the optimal use of land, and the agricultural sector model is then linked to a biological agent based simulation model (ABM) calculating changes in the population...... for improving bio-diversity and securing drinking water. That is, combining economic modeling with physical biological modeling and geological evaluation allows us to select unsprayed field margins as the most effective instrument. Sensitivity analysis conducted on bio-diversity suggest that this result...

  16. Beam Instrument Development System

    Energy Technology Data Exchange (ETDEWEB)

    2016-01-08

    Beam Instrumentation Development System (BIDS) is a collection of common support libraries and modules developed during a series of Low-Level Radio Frequency (LLRF) control and timing/synchronization projects. BIDS includes a collection of Hardware Description Language (HDL) libraries and software libraries. The BIDS can be used for the development of any FPGA-based system, such as LLRF controllers. HDL code in this library is generic and supports common Digital Signal Processing (DSP) functions, FPGA-specific drivers (high-speed serial link wrappers, clock generation, etc.), ADC/DAC drivers, Ethernet MAC implementation, etc.

  17. Calibration of "Babyline" RP instruments

    CERN Multimedia

    2015-01-01

      If you have old RP instrumentation of the “Babyline” type, as shown in the photo, please contact the Radiation Protection Group (Joffrey Germa, 73171) to have the instrument checked and calibrated. Thank you. Radiation Protection Group

  18. Exoplanetary Science: Instrumentation, Observations, and Expectations

    Science.gov (United States)

    McElwain, Michael

    2011-01-01

    More than 700 exoplanets have been discovered and studied using indirect techniques, leading our field into the exciting new era of comparative exoplanetology. However, the direct detection of exoplanetary systems still remains at the sensitivity limits of both ground- and space-based observatories. The development of new technologies for adaptive optics systems and high contrast instruments continues to increase the ability to directly study exoplanets. The scientific impact of these developments has promising prospects for both short and long timescales. In my talk, I will discuss recent highlights from the SEEDS survey and the current instrumentation in use at the Subaru telescope. SEEDS is a high contrast imaging strategic observing program with 120 nights of time allocated at the NAOJ's flagship optical and infrared telescope. I will also describe new instrumentation I designed to improve the SEEDS capabilities and efficiency. Finally, I will briefly discuss the conceptual design of a transiting planet camera to fly as a potential second generation instrument on-board NASA's SOFIA observatory.

  19. VIEWS OF THE INSTRUCTORS AND STUDENTS OF MUSIC TEACHING DEPARTMENT ON THE CONTENT OF SCHOOL INSTRUMENTS LESSON

    Directory of Open Access Journals (Sweden)

    Murat GÖKALP

    2013-06-01

    Full Text Available The purpose of this study is to find out the views of the instructors and students of Music Teaching Department on the content of school instruments lesson, the extent to which this content meets the needs of prospective music teachers, the extent of the efficiency the instructors obtain from this lesson and the things that can be done to increase the functionality and efficiency of this lesson and to offer solutions to these issues. The sample of the study is students studying in their third and fourth years at the Fine Arts Teaching departments of universities in Turkey during the academic year 2012-2013 and the instructors teaching school instruments in these universities. The sample consists of 451 students in their third and fourth years studying at Ondokuz Mayıs University, Abant İzzet Baysal University, Uludağ University, Harran University, Marmara University, Mehmet Akif Ersoy University, Dokuz Eylül University, Atatürk University, Niğde University and İnönü University and 15 instructors teaching at Ondokuz Mayıs University, Abant İzzet Baysal University, Uludağ University and Marmara University. The study uses quantitative and qualitative descriptive research method with an integrated approach. The data was collected through “Survey for School Instruments Lesson” and “Interview Form for Instructors” developed by the researcher. The statistical analysis of the quantitative data was made by SPSS 15.0 package program and the analysis of the qualitative data was made through content analysis. The findings of the students’ survey indicated that the students thought three semesters of school instruments lesson in only the first and second years was insufficient. Moreover, it was concluded that one semester period for baglama was not sufficient enough to attain the skill of playing the instrument and the students did not have sufficient information about the literature on school instruments. It can be said that these

  20. Keyboard Emulation For Computerized Instrumentation

    Science.gov (United States)

    Wiegand, P. M.; Crouch, S. R.

    1989-01-01

    Keyboard emulator has interface at same level as manual keyboard entry. Since communication and control take place at high intelligence level in instrument, all instrument circuitry fully utilized. Little knowledge of instrument circuitry necessary, since only task interface performs is key closure. All existing logic and error checking still performed by instrument, minimizing workload of laboratory microcomputer. Timing constraints for interface operation minimal at keyboard entry level.

  1. Fast Plasma Instrument for MMS: Data Compression Simulation Results

    Science.gov (United States)

    Barrie, A.; Adrian, M. L.; Yeh, P.; Winkert, G.; Lobell, J.; Vinas, A. F.; Simpson, D. G.

    2009-12-01

    Magnetospheric Multiscale (MMS) mission will study small-scale reconnection structures and their rapid motions from closely spaced platforms using instruments capable of high angular, energy, and time resolution measurements. To meet these requirements, the Fast Plasma Instrument (FPI) consists of eight (8) identical half top-hat electron sensors and eight (8) identical ion sensors and an Instrument Data Processing Unit (IDPU). The sensors (electron or ion) are grouped into pairs whose 6° x 180° fields-of-view (FOV) are set 90° apart. Each sensor is equipped with electrostatic aperture steering to allow the sensor to scan a 45° x 180° fan about the its nominal viewing (0° deflection) direction. Each pair of sensors, known as the Dual Electron Spectrometer (DES) and the Dual Ion Spectrometer (DIS), occupies a quadrant on the MMS spacecraft and the combination of the eight electron/ion sensors, employing aperture steering, image the full-sky every 30-ms (electrons) and 150-ms (ions), respectively. To probe the diffusion regions of reconnection, the highest temporal/spatial resolution mode of FPI results in the DES complement of a given spacecraft generating 6.5-Mb s-1 of electron data while the DIS generates 1.1-Mb s-1 of ion data yielding an FPI total data rate of 6.6-Mb s-1. The FPI electron/ion data is collected by the IDPU then transmitted to the Central Data Instrument Processor (CIDP) on the spacecraft for science interest ranking. Only data sequences that contain the greatest amount of temporal/spatial structure will be intelligently down-linked by the spacecraft. Currently, the FPI data rate allocation to the CIDP is 1.5-Mb s-1. Consequently, the FPI-IDPU must employ data/image compression to meet this CIDP telemetry allocation. Here, we present updated simulations of the CCSDS 122.0-B-1 algorithm-based compression of the FPI-DES electron data as well as the FPI-DIS ion data. Compression analysis is based upon a seed of re-processed Cluster

  2. Evaluation of changes in postnatal care using the "Parents' Postnatal Sense of Security" instrument and an assessment of the instrument's reliability and validity

    Directory of Open Access Journals (Sweden)

    Kvist Linda J

    2009-08-01

    Full Text Available Abstract Background A sense of security is important for experiences of parenthood in the early postpartum period. The objectives of this study were to evaluate two models of postnatal care using a questionnaire incorporating the Parents' Postpartum Sense of Security (PPSS instrument and to test the validity of the PPSS instrument. Methods Postal surveys were sent to 234 mothers who had experienced two different forms of postnatal care (study group and control group and returned by 86.8%. These two groups of mothers were compared for total scores on the PPSS instrument. Demographic variables and mothers' opinions about care interventions were also compared and these variables were tested for correlations with the total PPSS score. A regression analysis was carried out to assess areas of midwifery care which might affect a sense of security. The internal consistency and concurrent validity of the instrument were tested for the total population. Results there were no significant differences between the groups for scores on the PPSS instrument. A total of three variables predicted 26% of the variability on the PPSS scores for the study group and five variables predicted 37% of the variability in the control group. One variable was common to both: "The midwives on the postnatal ward paid attention to the mother as an individual". There were significant correlations between the total PPSS scores and scores for postpartum talks and visits to the breastfeeding clinic. There was also a significant correlation between the single question: "I felt secure during the first postpartum week" and the total PPSS score. Tests for internal consistency and concurrent validity were satisfactory. Conclusion The proposed new model of care neither improved nor impaired mothers' feelings of security the week following birth. Being seen as an individual by the midwife who provides postnatal care may be an important variable for mothers' sense of postnatal security. It

  3. TAIPAN instrument fibre positioner and Starbug robots: engineering overview

    Science.gov (United States)

    Staszak, Nicholas F.; Lawrence, Jon; Brown, David M.; Brown, Rebecca; Zhelem, Ross; Goodwin, Michael; Kuehn, Kyler; Lorente, Nuria P. F.; Nichani, Vijay; Waller, Lew; Case, Scott; Content, Robert; Hopkins, Andrew M.; Klauser, Urs; Pai, Naveen; Mueller, Rolf; Mali, Slavko; Vuong, Minh V.

    2016-07-01

    TAIPAN will conduct a stellar and galaxy survey of the Southern sky. The TAIPAN positioner is being developed as a prototype for the MANIFEST instrument on the GMT. The design for TAIPAN incorporates 150 optical fibres (with an upgrade path to 300) situated within independently controlled robotic positioners known as Starbugs. Starbugs allow precise parallel positioning of individual fibres, thus significantly reducing instrument configuration time and increasing the amount of observing time. Presented is an engineering overview of the UKST upgrade of the completely new Instrument Spider Assembly utilized to support the Starbug Fibre Positioning Robot and current status of the Starbug itself.

  4. Assessing Specific Sexual Behavior: Instrument Development and Validation Techniques.

    Science.gov (United States)

    Webb, Monica C; Chaney, J Don; Chen, W William; Dodd, Virginia J; Huang, I-Chan; Sanders, Sadie

    2015-02-01

    Through the use of multi-modal methods, the purpose of this study was to develop and assess measurement properties of an instrument evaluating specific sexual behaviors of college students and the role alcohol intoxication plays in one's intention to participate in these behaviors. A modified version of N. Krause's instrument development process was applied to create a behavior-specific instrument assessing oral, vaginal, and anal sex behaviors. The process included a review by expert scholars in relevant fields, cognitive interviews with the target population using screen-capture program Camtasia, piloting to assess measurement scales, and a formal investigation. The applied instrument development process employed screen capture software and web-based surveying in a cost-effective format suitable for mixed-method measurement development. The development and application of the instrument provides a clearer understanding of the relationship between alcohol use and sexual activity and aids in the development of effective public health interventions and policies.

  5. Advancements in Actuated Musical Instruments

    DEFF Research Database (Denmark)

    Overholt, Daniel; Berdahl, Edgar; Hamilton, Robert

    2011-01-01

    are physical instruments that have been endowed with virtual qualities controlled by a computer in real-time but which are nevertheless tangible. These instruments provide intuitive and engaging new forms of interaction. They are different from traditional (acoustic) and fully automated (robotic) instruments...

  6. Electronic Instruments -- Played or Used?

    Science.gov (United States)

    Ulveland, Randall Dana

    1998-01-01

    Compares the experience of playing an acoustic instrument to an electronic instrument by analyzing the constant structures and relationships between the experiences. Concludes that students' understanding of the physical experience of making music increases when experiences with acoustic instruments precede their exposure to electronic…

  7. Mallet Instruments Challenge Beginning Percussionists.

    Science.gov (United States)

    Grumley, Fred

    1983-01-01

    Orff mallet instruments should be used in beginning band classes. Adding mallet instruments would expand a beginner's concept of percussion instruments. Just as important, the percussion section would provide a solid melodic and harmonic foundation to assist beginning wind instrumentalists with their insecurities about pitch. (RM)

  8. Alumni Perspectives Survey, 2011. Survey Report

    Science.gov (United States)

    Sheikh, Sabeen

    2011-01-01

    Since the Graduate Management Admission Council[R] (GMAC[R]) first began conducting its Alumni Perspectives Surveys 11 years ago, several "truths" about graduate business school alumni have consistently stood the test of time: They are and remain eminently employable. They constantly rate the value of the degree highly. This year's results are…

  9. An Instrumental Innovation

    Science.gov (United States)

    1978-01-01

    Think of guitars and you think of rock and country music, or the vigorous rhythms of the gypsy flamenco, or perhaps the classical strumming of a Segovia. About the last thing you would associate with guitars is aerospace technology. Yet there is a connection. A whole family of quality guitars is an outgrowth of helicopter rotor research conducted for the military services and NASA by an aerospace contractor. These musical spinoffs, commercially available and rapidly gaining in popularity, are the Ovation guitar line, manufactured by Ovation Instruments, Inc., Bloomfield, Connecticut. Ovation Instruments is a subsidiary of Kaman Corporation, a diversified company originally formed to develop and build helicopters. A helicopter's rotor system, with thousands of moving parts, is highly susceptible to vibration. For rotor efficiency, vibration must be "dampened," or reduced. Like other helicopter builders, Kaman Corporation spent years of research toward that end. The technology thus developed, together with the availability of staff experts in vibration engineering, sparked an idea in the mind of the company's president and founder, Charles H. Karnan. A guitarist of professional caliber, Kaman reasoned that vibration-dampening technology could be turned around to enhance vibration and thereby produce a guitar with superior sound.

  10. The QUIET Instrument

    Energy Technology Data Exchange (ETDEWEB)

    Bischoff, C.; et al.

    2012-07-01

    The Q/U Imaging ExperimenT (QUIET) is designed to measure polarization in the Cosmic Microwave Background, targeting the imprint of inflationary gravitational waves at large angular scales ({approx}1{sup o}). Between 2008 October and 2010 December, two independent receiver arrays were deployed sequentially on a 1.4m side-fed Dragonian telescope. The polarimeters which form the focal planes use a highly compact design based on High Electron Mobility Transistors (HEMTs) that provides simultaneous measurements of the Stokes parameters Q, U, and I in a single module. The 17-element Q-band polarimeter array, with a central frequency of 43.1 GHz, has the best sensitivity (69 {mu}Ks{sup 1/2}) and the lowest instrumental systematic errors ever achieved in this band, contributing to the tensor-to-scalar ratio at r < 0:1. The 84-element W-band polarimeter array has a sensitivity of 87 {mu}Ks{sup 1/2} at a central frequency of 94.5 GHz. It has the lowest systematic errors to date, contributing at r < 0:01. The two arrays together cover multipoles in the range {ell} {approx} 25 -- 975. These are the largest HEMT-based arrays deployed to date. This article describes the design, calibration, performance of, and sources of systematic error for the instrument.

  11. Balances instruments, manufacturers, history

    CERN Document Server

    Robens, Erich; Kiefer, Susanne

    2014-01-01

    The book deals mainly with direct mass determination by means of a conventional balances. It covers the history of the balance from the beginnings in Egypt earlier than 3000 BC to recent developments. All balance types are described with emphasis on scientific balances. Methods of indirect mass determination, which are applied to very light objects like molecules and the basic particles of matter and celestial bodies, are included.  As additional guidance, today’s manufacturers are listed and the profile of important companies is reviewed. Several hundred photographs, reproductions and drawings show instruments and their uses. This book includes commercial weighing instruments for merchandise and raw materials in workshops as well as symbolic weighing in the ancient Egyptian’s ceremony of ‘Weighing of the Heart’, the Greek fate balance, the Roman  Justitia, Juno Moneta and Middle Ages scenes of the Last Judgement with Jesus or St. Michael and of modern balances. The photographs are selected from the...

  12. Instrument Remote Control via the Astronomical Instrument Markup Language

    Science.gov (United States)

    Sall, Ken; Ames, Troy; Warsaw, Craig; Koons, Lisa; Shafer, Richard

    1998-01-01

    The Instrument Remote Control (IRC) project ongoing at NASA's Goddard Space Flight Center's (GSFC) Information Systems Center (ISC) supports NASA's mission by defining an adaptive intranet-based framework that provides robust interactive and distributed control and monitoring of remote instruments. An astronomical IRC architecture that combines the platform-independent processing capabilities of Java with the power of Extensible Markup Language (XML) to express hierarchical data in an equally platform-independent, as well as human readable manner, has been developed. This architecture is implemented using a variety of XML support tools and Application Programming Interfaces (API) written in Java. IRC will enable trusted astronomers from around the world to easily access infrared instruments (e.g., telescopes, cameras, and spectrometers) located in remote, inhospitable environments, such as the South Pole, a high Chilean mountaintop, or an airborne observatory aboard a Boeing 747. Using IRC's frameworks, an astronomer or other scientist can easily define the type of onboard instrument, control the instrument remotely, and return monitoring data all through the intranet. The Astronomical Instrument Markup Language (AIML) is the first implementation of the more general Instrument Markup Language (IML). The key aspects of our approach to instrument description and control applies to many domains, from medical instruments to machine assembly lines. The concepts behind AIML apply equally well to the description and control of instruments in general. IRC enables us to apply our techniques to several instruments, preferably from different observatories.

  13. Instrumentation for gamma-ray astronomy

    Science.gov (United States)

    Bertsch, David L.; Fichtel, Carl E.; Trombka, Jacob I.

    1988-01-01

    The current status of gamma-ray-telescope technology for ground, airborne, and space observations is surveyed and illustrated with drawings, diagrams, and graphs and tables of typical data. For the low- and medium-energy ranges, consideration is given to detectors and detector cooling systems, background-rejection methods, radiation damage, large-area detectors, gamma-ray imaging, data analysis, and the Compton-interaction region. Also discussed are the gamma-ray interaction process at high energies; multilevel automated spark-chamber gamma-ray telescopes; the Soviet Gamma-1 telescope; the EGRET instrument for the NASA Gamma-Ray Observatory; and Cerenkov, air-shower, and particle-detector instruments for the TeV and PeV ranges. Significant improvements in resolution and sensitivity are predicted for the near future.

  14. Consistency and sealing of advanced bipolar tissue sealers

    Directory of Open Access Journals (Sweden)

    Chekan EG

    2015-04-01

    Full Text Available Edward G Chekan , Mark A Davison, David W Singleton, John Z Mennone, Piet Hinoul Ethicon, Inc., Cincinnati, OH, USA Objectives: The aim of this study was to evaluate two commonly used advanced bipolar devices (ENSEAL® G2 Tissue Sealers and LigaSure™ Blunt Tip for compression uniformity, vessel sealing strength, and consistency in bench-top analyses. Methods: Compression analysis was performed with a foam pad/sensor apparatus inserted between closed jaws of the instruments. Average pressures (psi were recorded across the entire inside surface of the jaws, and over the distal one-third of jaws. To test vessel sealing strength, ex vivo pig carotid arteries were sealed and transected and left and right (sealed halves of vessels were subjected to burst pressure testing. The maximum bursting pressures of each half of vessels were averaged to obtain single data points for analysis. The absence or presence of tissue sticking to device jaws was noted for each transected vessel. Results: Statistically higher average compression values were found for ENSEAL® instruments (curved jaw and straight jaw compared to LigaSure™, P<0.05. Moreover, the ENSEAL® devices retained full compression at the distal end of jaws. Significantly higher and more consistent median burst pressures were noted for ENSEAL® devices relative to LigaSure™ through 52 firings of each device (P<0.05. LigaSure™ showed a significant reduction in median burst pressure for the final three firings (cycles 50–52 versus the first three firings (cycles 1–3, P=0.027. Tissue sticking was noted for 1.39% and 13.3% of vessels transected with ENSEAL® and LigaSure™, respectively. Conclusion: In bench-top testing, ENSEAL® G2 sealers produced more uniform compression, stronger and more consistent vessel sealing, and reduced tissue sticking relative to LigaSure™. Keywords: ENSEAL, sealing, burst pressure, laparoscopic, compression, LigaSure

  15. River Ice Data Instrumentation

    Science.gov (United States)

    1997-06-01

    edge in the field of ice engineering expands. For example, ice concentration and freezeup stage are not considered by the survey respondents to...im- pacts both freezeup and breakup jam formation Table 2. Ice parameters currently monitored, by Divisions (as of 1995). Ice parameters currently...V V V V Date of ice in V V V V Ice concentration V V V V Freezeup stage V V V V V Note: Southwestern Division does not currently monitor ice

  16. Victimisation surveys: What are they good for?

    Directory of Open Access Journals (Sweden)

    Aromaa Kauko

    2012-01-01

    Full Text Available The author analyzes the usefulness of victimization surveys. The paper is focused of surveys in which nationally representative population samples are surveyed for their personal victimisation experiences, and their attitudes and opinions of issues related to crime and crime control. The author points out the benefits of using victimization surveys, but also explains why most countries have failed to make systematic use of this instrument.

  17. Development and psychometric evaluation of the Primary Health Care Engagement (PHCE) Scale: a pilot survey of rural and remote nurses.

    Science.gov (United States)

    Kosteniuk, Julie G; Wilson, Erin C; Penz, Kelly L; MacLeod, Martha L P; Stewart, Norma J; Kulig, Judith C; Karunanayake, Chandima P; Kilpatrick, Kelley

    2016-01-01

    To report the development and psychometric evaluation of a scale to measure rural and remote (rural/remote) nurses' perceptions of the engagement of their workplaces in key dimensions of primary health care (PHC). Amidst ongoing PHC reforms, a comprehensive instrument is needed to evaluate the degree to which rural/remote health care settings are involved in the key dimensions that characterize PHC delivery, particularly from the perspective of professionals delivering care. This study followed a three-phase process of instrument development and psychometric evaluation. A literature review and expert consultation informed instrument development in the first phase, followed by an iterative process of content evaluation in the second phase. In the final phase, a pilot survey was undertaken and item discrimination analysis employed to evaluate the internal consistency reliability of each subscale in the preliminary 60-item Primary Health Care Engagement (PHCE) Scale. The 60-item scale was subsequently refined to a 40-item instrument. The pilot survey sample included 89 nurses in current practice who had experience in rural/remote practice settings. Participants completed either a web-based or paper survey from September to December, 2013. Following item discrimination analysis, the 60-item instrument was refined to a 40-item PHCE Scale consisting of 10 subscales, each including three to five items. Alpha estimates of the 10 refined subscales ranged from 0.61 to 0.83, with seven of the subscales demonstrating acceptable reliability (α ⩾ 0.70). The refined 40-item instrument exhibited good internal consistency reliability (α=0.91). The 40-item PHCE Scale may be considered for use in future studies regardless of locale, to measure the extent to which health care professionals perceive their workplaces to be engaged in key dimensions of PHC.

  18. On the Initial State and Consistency Relations

    CERN Document Server

    Berezhiani, Lasha

    2014-01-01

    We study the effect of the initial state on the consistency conditions for adiabatic perturbations. In order to be consistent with the constraints of General Relativity, the initial state must be diffeomorphism invariant. As a result, we show that initial wavefunctional/density matrix has to satisfy a Slavnov-Taylor identity similar to that of the action. We then investigate the precise ways in which modified initial states can lead to violations of the consistency relations. We find two independent sources of violations: i) the state can include initial non-Gaussianities; ii) even if the initial state is Gaussian, such as a Bogoliubov state, the modified 2-point function can modify the q->0 analyticity properties of the vertex functional and result in violations of the consistency relations.

  19. On the initial state and consistency relations

    Energy Technology Data Exchange (ETDEWEB)

    Berezhiani, Lasha; Khoury, Justin, E-mail: lashaber@sas.upenn.edu, E-mail: jkhoury@sas.upenn.edu [Center for Particle Cosmology, Department of Physics and Astronomy, University of Pennsylvania, 209 South 33rd Street, Philadelphia, PA 19104 (United States)

    2014-09-01

    We study the effect of the initial state on the consistency conditions for adiabatic perturbations. In order to be consistent with the constraints of General Relativity, the initial state must be diffeomorphism invariant. As a result, we show that initial wavefunctional/density matrix has to satisfy a Slavnov-Taylor identity similar to that of the action. We then investigate the precise ways in which modified initial states can lead to violations of the consistency relations. We find two independent sources of violations: i) the state can include initial non-Gaussianities; ii) even if the initial state is Gaussian, such as a Bogoliubov state, the modified 2-point function can modify the q-vector → 0 analyticity properties of the vertex functional and result in violations of the consistency relations.

  20. Self-Consistent Asset Pricing Models

    CERN Document Server

    Malevergne, Y

    2006-01-01

    We discuss the foundations of factor or regression models in the light of the self-consistency condition that the market portfolio (and more generally the risk factors) is (are) constituted of the assets whose returns it is (they are) supposed to explain. As already reported in several articles, self-consistency implies correlations between the return disturbances. As a consequence, the alpha's and beta's of the factor model are unobservable. Self-consistency leads to renormalized beta's with zero effective alpha's, which are observable with standard OLS regressions. Analytical derivations and numerical simulations show that, for arbitrary choices of the proxy which are different from the true market portfolio, a modified linear regression holds with a non-zero value $\\alpha_i$ at the origin between an asset $i$'s return and the proxy's return. Self-consistency also introduces ``orthogonality'' and ``normality'' conditions linking the beta's, alpha's (as well as the residuals) and the weights of the proxy por...

  1. Quasiparticle self-consistent GW theory.

    Science.gov (United States)

    van Schilfgaarde, M; Kotani, Takao; Faleev, S

    2006-06-09

    In past decades the scientific community has been looking for a reliable first-principles method to predict the electronic structure of solids with high accuracy. Here we present an approach which we call the quasiparticle self-consistent approximation. It is based on a kind of self-consistent perturbation theory, where the self-consistency is constructed to minimize the perturbation. We apply it to selections from different classes of materials, including alkali metals, semiconductors, wide band gap insulators, transition metals, transition metal oxides, magnetic insulators, and rare earth compounds. Apart from some mild exceptions, the properties are very well described, particularly in weakly correlated cases. Self-consistency dramatically improves agreement with experiment, and is sometimes essential. Discrepancies with experiment are systematic, and can be explained in terms of approximations made.

  2. Consistency in the World Wide Web

    DEFF Research Database (Denmark)

    Thomsen, Jakob Grauenkjær

    Tim Berners-Lee envisioned that computers will behave as agents of humans on the World Wide Web, where they will retrieve, extract, and interact with information from the World Wide Web. A step towards this vision is to make computers capable of extracting this information in a reliable...... and consistent way. In this dissertation we study steps towards this vision by showing techniques for the specication, the verication and the evaluation of the consistency of information in the World Wide Web. We show how to detect certain classes of errors in a specication of information, and we show how...... the World Wide Web, in order to help perform consistent evaluations of web extraction techniques. These contributions are steps towards having computers reliable and consistently extract information from the World Wide Web, which in turn are steps towards achieving Tim Berners-Lee's vision. ii...

  3. Media Lityeracy of Teachers: An Instrument for Assessing Their Competence

    Directory of Open Access Journals (Sweden)

    Vicent Gozálvez Pérez

    2014-10-01

    Full Text Available This article describes the process to elaborate and validate a survey that aims to identify and evaluate the media literacy level of non-university teachers.Currently, in a highly connected environment where media and communication technologies are increasingly relevant in the educational scope, it is essential to design an instrument that allows us to measure teachers media literacy level. This survey may support the enhancement of pedagogical proposals in order to improve teachers practice as well as teacher professional training. To validate the survey content, Delphi methodology was used by experts of seven Spanish universities. Converging validation has been done on the basis of a sample of 906 teachers from nine Spanish Autonomous Communities. The conclusion after survey psychometric analysis is that this instrument is adequate to measure media literacy level of non-university teachers.

  4. Flood damage curves for consistent global risk assessments

    Science.gov (United States)

    de Moel, Hans; Huizinga, Jan; Szewczyk, Wojtek

    2016-04-01

    Assessing potential damage of flood events is an important component in flood risk management. Determining direct flood damage is commonly done using depth-damage curves, which denote the flood damage that would occur at specific water depths per asset or land-use class. Many countries around the world have developed flood damage models using such curves which are based on analysis of past flood events and/or on expert judgement. However, such damage curves are not available for all regions, which hampers damage assessments in those regions. Moreover, due to different methodologies employed for various damage models in different countries, damage assessments cannot be directly compared with each other, obstructing also supra-national flood damage assessments. To address these problems, a globally consistent dataset of depth-damage curves has been developed. This dataset contains damage curves depicting percent of damage as a function of water depth as well as maximum damage values for a variety of assets and land use classes (i.e. residential, commercial, agriculture). Based on an extensive literature survey concave damage curves have been developed for each continent, while differentiation in flood damage between countries is established by determining maximum damage values at the country scale. These maximum damage values are based on construction cost surveys from multinational construction companies, which provide a coherent set of detailed building cost data across dozens of countries. A consistent set of maximum flood damage values for all countries was computed using statistical regressions with socio-economic World Development Indicators from the World Bank. Further, based on insights from the literature survey, guidance is also given on how the damage curves and maximum damage values can be adjusted for specific local circumstances, such as urban vs. rural locations, use of specific building material, etc. This dataset can be used for consistent supra

  5. Consistency Relations for Large Field Inflation

    CERN Document Server

    Chiba, Takeshi

    2014-01-01

    Consistency relations for chaotic inflation with a monomial potential and natural inflation and hilltop inflation are given which involve the scalar spectral index $n_s$, the tensor-to-scalar ratio $r$ and the running of the spectral index $\\alpha$. The measurement of $\\alpha$ with $O(10^{-3})$ and the improvement in the measurement of $n_s$ could discriminate monomial model from natural/hilltop inflation models. A consistency region for general large field models is also presented.

  6. Reporting guidelines for survey research: an analysis of published guidance and reporting practices.

    Science.gov (United States)

    Bennett, Carol; Khangura, Sara; Brehaut, Jamie C; Graham, Ian D; Moher, David; Potter, Beth K; Grimshaw, Jeremy M

    2010-08-01

    Research needs to be reported transparently so readers can critically assess the strengths and weaknesses of the design, conduct, and analysis of studies. Reporting guidelines have been developed to inform reporting for a variety of study designs. The objective of this study was to identify whether there is a need to develop a reporting guideline for survey research. We conducted a three-part project: (1) a systematic review of the literature (including "Instructions to Authors" from the top five journals of 33 medical specialties and top 15 general and internal medicine journals) to identify guidance for reporting survey research; (2) a systematic review of evidence on the quality of reporting of surveys; and (3) a review of reporting of key quality criteria for survey research in 117 recently published reports of self-administered surveys. Fewer than 7% of medical journals (n = 165) provided guidance to authors on survey research despite a majority having published survey-based studies in recent years. We identified four published checklists for conducting or reporting survey research, none of which were validated. We identified eight previous reviews of survey reporting quality, which focused on issues of non-response and accessibility of questionnaires. Our own review of 117 published survey studies revealed that many items were poorly reported: few studies provided the survey or core questions (35%), reported the validity or reliability of the instrument (19%), defined the response rate (25%), discussed the representativeness of the sample (11%), or identified how missing data were handled (11%). There is limited guidance and no consensus regarding the optimal reporting of survey research. The majority of key reporting criteria are poorly reported in peer-reviewed survey research articles. Our findings highlight the need for clear and consistent reporting guidelines specific to survey research.

  7. Reporting Guidelines for Survey Research: An Analysis of Published Guidance and Reporting Practices

    Science.gov (United States)

    Bennett, Carol; Khangura, Sara; Brehaut, Jamie C.; Graham, Ian D.; Moher, David; Potter, Beth K.; M. Grimshaw, Jeremy

    2011-01-01

    Background Research needs to be reported transparently so readers can critically assess the strengths and weaknesses of the design, conduct, and analysis of studies. Reporting guidelines have been developed to inform reporting for a variety of study designs. The objective of this study was to identify whether there is a need to develop a reporting guideline for survey research. Methods and Findings We conducted a three-part project: (1) a systematic review of the literature (including “Instructions to Authors” from the top five journals of 33 medical specialties and top 15 general and internal medicine journals) to identify guidance for reporting survey research; (2) a systematic review of evidence on the quality of reporting of surveys; and (3) a review of reporting of key quality criteria for survey research in 117 recently published reports of self-administered surveys. Fewer than 7% of medical journals (n = 165) provided guidance to authors on survey research despite a majority having published survey-based studies in recent years. We identified four published checklists for conducting or reporting survey research, none of which were validated. We identified eight previous reviews of survey reporting quality, which focused on issues of non-response and accessibility of questionnaires. Our own review of 117 published survey studies revealed that many items were poorly reported: few studies provided the survey or core questions (35%), reported the validity or reliability of the instrument (19%), defined the response rate (25%), discussed the representativeness of the sample (11%), or identified how missing data were handled (11%). Conclusions There is limited guidance and no consensus regarding the optimal reporting of survey research. The majority of key reporting criteria are poorly reported in peer-reviewed survey research articles. Our findings highlight the need for clear and consistent reporting guidelines specific to survey research. Please see

  8. Back to Basics: Instrument Cleaning.

    Science.gov (United States)

    Spruce, Lisa

    2017-03-01

    Adequately cleaning and processing surgical instruments may be challenging for perioperative team members; however, the cleaning and processing of instruments are critical steps in making instruments safe to use on patients and achieving an appropriately safe OR environment. Instruments that are cleaned properly have had organic debris and soil removed, rendering them ready for sterilization or disinfection. This Back to Basics article covers the basic steps and considerations for cleaning and processing instruments before sterilization. Copyright © 2017 AORN, Inc. Published by Elsevier Inc. All rights reserved.

  9. Radio data and synchrotron emission in consistent cosmic ray models

    CERN Document Server

    Bringmann, Torsten; Lineros, Roberto A

    2011-01-01

    We consider the propagation of electrons in phenomenological two-zone diffusion models compatible with cosmic-ray nuclear data and compute the diffuse synchrotron emission resulting from their interaction with galactic magnetic fields. We find models in agreement not only with cosmic ray data but also with radio surveys at essentially all frequencies. Requiring such a globally consistent description strongly disfavors both a very large (L>15 kpc) and small (L<1 kpc) effective size of the diffusive halo. This has profound implications for, e.g., indirect dark matter searches.

  10. A Systematic Review of Student Self-Report Instruments That Assess Student-Teacher Relationships

    Science.gov (United States)

    Phillipo, Kate; Conner, Jerusha Osber; Davidson, Shannon; Pope, Denise

    2017-01-01

    Background: A large body of survey-based research asserts that the quality and strength of student-teacher relationships (STRs) predict a host of academic and nonacademic outcomes; however, advances in survey design research have led some to question existing survey instruments' psychometric soundness. Concurrently, qualitative research on STRs…

  11. Concurrent validation of two key health literacy instruments in a South Eastern European population.

    Science.gov (United States)

    Toçi, Ervin; Burazeri, Genc; Sørensen, Kristine; Kamberi, Haxhi; Brand, Helmut

    2015-06-01

    Public health practice has come to increasing recognition of health promotion and the central role of knowledge, attitude, beliefs and practices in achieving health promotion. Health literacy (HL) is an under-explored topic in South Eastern European countries. There are no HL reports from Albania to date. The aim of this study was to assess the concurrent validity of the European Health Literacy Survey Questionnaire (HLS-EU-Q) and the Test of Functional Health Literacy in Adults (TOFHLA) in a population-based sample of adults in Albania. A cross-sectional study was conducted in 2013 in Tirana, Albania, including 239 individuals aged ≥ 18 years (61% women; 87% response). A structured interviewer-administered questionnaire was applied twice (test and retest procedure after 2 weeks) including HLS-EU-Q and TOFHLA instruments. The internal consistency was high for both instruments (Cronbach's alpha for the test procedure was 0.92 for TOFHLA and 0.98 for HLS-EU-Q). Both tools exhibited a high stability over time (Spearman's rho: 0.88 for TOFHLA and 0.87 for HLS-EU). Mean values of both instruments were similar in men and women (mean score for TOFHLA: 76.0 vs. 76.5, P = 0.83; mean score for HLS-EU-Q: 32.2 vs. 32.6, P = 0.63). For both instruments, higher HL scores were significantly associated with younger age, higher educational and economic level and lower body mass index. Our study provides valuable novel evidence on concurrent validation of two major HL instruments in a South Eastern European population-based sample. Future studies should be conducted in order to confirm and expand our findings. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  12. Astronomical Instrumentation System Markup Language

    Science.gov (United States)

    Goldbaum, Jesse M.

    2016-05-01

    The Astronomical Instrumentation System Markup Language (AISML) is an Extensible Markup Language (XML) based file format for maintaining and exchanging information about astronomical instrumentation. The factors behind the need for an AISML are first discussed followed by the reasons why XML was chosen as the format. Next it's shown how XML also provides the framework for a more precise definition of an astronomical instrument and how these instruments can be combined to form an Astronomical Instrumentation System (AIS). AISML files for several instruments as well as one for a sample AIS are provided. The files demonstrate how AISML can be utilized for various tasks from web page generation and programming interface to instrument maintenance and quality management. The advantages of widespread adoption of AISML are discussed.

  13. Reconfigurable laser ranging instrument

    Science.gov (United States)

    Schneiter, John

    1994-03-01

    This paper describes the design and operation of a fast, flexible, non-contact, eye-safe laser ranging instrument useful in a variety of industrial metrology situations, such as in-process machining control and part inspection. The system has variable computer-controlled standoff and depth of field, and can obtain 3-D images of surfaces within a range of from 1.5 ft to almost 10 ft from the final optical element. The minimum depth of field is about 3.5 in. at 1.5 ft and about 26 in. at the far range. The largest depth of field for which useful data are available is about 41 in. Resolution, with appropriate averaging, is about one part in 4000 of the depth of field, which implies a best case resolution for this prototype of 0.00075 in. System flexibility is achieved by computer controlled relative positioning of optical components.

  14. Portable musical instrument amplifier

    Energy Technology Data Exchange (ETDEWEB)

    Christian, David E. (Danbury, CT)

    1990-07-24

    The present invention relates to a musical instrument amplifier which is particularly useful for electric guitars. The amplifier has a rigid body for housing both the electronic system for amplifying and processing signals from the guitar and the system's power supply. An input plug connected to and projecting from the body is electrically coupled to the signal amplifying and processing system. When the plug is inserted into an output jack for an electric guitar, the body is rigidly carried by the guitar, and the guitar is operatively connected to the electrical amplifying and signal processing system without use of a loose interconnection cable. The amplifier is provided with an output jack, into which headphones are plugged to receive amplified signals from the guitar. By eliminating the conventional interconnection cable, the amplifier of the present invention can be used by musicians with increased flexibility and greater freedom of movement.

  15. The MICE PID Instrumentation

    CERN Document Server

    Bonesini, M

    2008-01-01

    The international Muon Ionization Cooling Experiment (MICE) will carry out a systematic investigation of ionization cooling of a muon beam. As the emittance measurement will be done on a particle-by-particle basis, sophisticated beam instrumentation is needed to measure particle coordinates and timing vs RF. A PID system based on three time-of-flight stations, two Aerogel Cerenkov detectors and a KLOE-like calorimeter has been constructed in order to keep beam contamination ($e, \\pi$) well below 1%. The MICE time-of-flight system will measure timing with a resolution better than 70 ps per plane, in a harsh environment due to high particle rates, fringe magnetic fields and electron backgrounds from RF dark current.

  16. Instrumented Architectural Simulation System

    Science.gov (United States)

    Delagi, B. A.; Saraiya, N.; Nishimura, S.; Byrd, G.

    1987-01-01

    Simulation of systems at an architectural level can offer an effective way to study critical design choices if (1) the performance of the simulator is adequate to examine designs executing significant code bodies, not just toy problems or small application fragements, (2) the details of the simulation include the critical details of the design, (3) the view of the design presented by the simulator instrumentation leads to useful insights on the problems with the design, and (4) there is enough flexibility in the simulation system so that the asking of unplanned questions is not suppressed by the weight of the mechanics involved in making changes either in the design or its measurement. A simulation system with these goals is described together with the approach to its implementation. Its application to the study of a particular class of multiprocessor hardware system architectures is illustrated.

  17. Instrumented Pipeline Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Thomas Piro; Michael Ream

    2010-07-31

    This report summarizes technical progress achieved during the cooperative agreement between Concurrent Technologies Corporation (CTC) and U.S. Department of Energy to address the need for a for low-cost monitoring and inspection sensor system as identified in the Department of Energy (DOE) National Gas Infrastructure Research & Development (R&D) Delivery Reliability Program Roadmap.. The Instrumented Pipeline Initiative (IPI) achieved the objective by researching technologies for the monitoring of pipeline delivery integrity, through a ubiquitous network of sensors and controllers to detect and diagnose incipient defects, leaks, and failures. This report is organized by tasks as detailed in the Statement of Project Objectives (SOPO). The sections all state the objective and approach before detailing results of work.

  18. Ideology as instrument.

    Science.gov (United States)

    Glassman, Michael; Karno, Donna

    2007-12-01

    Comments on the article by J. T. Jost, which argued that the end-of-ideology claims that emerged in the aftermath of World War II were both incorrect and detrimental to the field of political psychology. M. Glassman and D. Karno make three critical points. First, Jost objectified ideology as a grand strategy implemented at the individual level, rather than as an instrument used for a specific purpose in activity. In doing so, he set ideology up as an "object" that guides human behavior rather than as a rational part of human experience. Second, they take issue with the idea that, because somebody acts in a manner that can be categorized as ideological, there actually is such a thing as ideology separate from that event and/or political experience and that psychologists ought to understand the meaning of ideology in order to understand future human activities as outside observers. Third, Jost seems to see this objective ideology as a unidirectional, causal mechanism for activity, a mechanism that assumes individuals act according to ideology, which eclipses the possibility that immediate ideological positions are the residue of purposeful activity. Glassman and Karno suggest that it may be better to take a pluralistic view of ideology in human action. Where ideology does exist, it is as a purposeful instrument--part of a logically based action to meet some ends-in-view--a mixture of immediate goals tied to secondary belief systems (which have been integrated to serve the material purposes of the purveyors of these ideologies). So if we are to understand ideology, we can only understand it through its use in human activity. (Copyright) 2007 APA.

  19. Aprendizaje instrumental en anfibios

    Directory of Open Access Journals (Sweden)

    Rubén N. Muzio

    1999-01-01

    Full Text Available Este trabajo presenta una revisión de los estudios realizados acerca de los mecanismos de aprendizaje en anfibios. Se conoce muy poco acerca de los procesos de aprendizaje en anfibios, y aún menos respecto de las relaciones cerebro-aprendizaje. Recientemente hemos comenzado el estudio sistemático del aprendizaje instrumental en el sapo Bufo arenarum dentro de un marco comparativo. Se observaron diversos fenómenos de aprendizaje comunes a una amplia variedad de vertebrados, tales como la adquisición bajo condiciones de entrenamiento masivo y espaciado, la extinción, la recuperación espontánea, el efecto subsiguiente al refuerzo, y el efecto en al adquisición de la magnitud del reforzamiento. Además, comenzamos el análisis de los efectos sobre el aprendizaje de las lesiones del pallium medial (estructura postulada como homóloga al hipocampo de los mamíferos. La lesión del paIlium medial no tuvo efectos sobre el desempeño ni sobre la tasa de captación de agua durante la adquisición. Pero retardó significativamente la extinción de la respuesta instrumental en un corredor recto. Estos datos sugieren que el palli um medial de los sapos juega un papel en la inhibición de respuestas previamente aprendidas. Los resultados de nuestros estudios en el sapo Bufo arenarum aportan datos origi na1es a la limitada información disponible sobre aprendizaje en anfibios.

  20. A Study to Examine Differences Between In Person and Online Survey Data Collection Methodologies.

    Directory of Open Access Journals (Sweden)

    ROBERT CASE,

    2009-01-01

    Full Text Available The purpose of this study was to examine differences between the results of an in person or face-to-face direct spending survey and a post-event online direct spending survey. Participants in a large annual marathon held in the Mid-Atlantic Region of the United States were used as subjects for the study. The research methodology selected for this study included an in person survey instrument administered to out-of-town marathon participants prior to the start of the event during the race number and race timing chip pick-up period. The same survey instrument was administered online four days after the conclusion of the marathon to the same group of out-of-town marathon participants who did not previously respond to the in person survey. Analysis of data and results revealed that average direct spending for the online respondents was consistently and significantly higher than spending for the in person respondents on direct spending questions. Spending on lodging for both groups showed no significant differences. It was recommended that the use of online survey methods be considered when conducting direct spending studies for participant oriented sporting events when adequate e-mail addresses are available and the potential respondents have a certain level of computer literacy.

  1. Policy Instruments to Improve Energy Performance of Existing Owner Occupied Dwellings

    Directory of Open Access Journals (Sweden)

    Lorraine Colette Murphy

    2016-11-01

    receipt of instruments. Moreover, the complete range of national instruments available at the time of the survey were studied to present a complete picture. A more detailed description of the methodologies adopted is presented below.MethodologyAn aim of research was to offer qualified accounts and a deeper analysis of how instruments for energy performance improvement in existing dwellings function. Research components focused on both individual instruments and combinations using a triangulation of methods and sources: expert interviews, a survey and literature review.The first step towards meeting the aim of research was to characterise and assess national instruments in the Netherlands. In the absence of an assessment framework for policy instruments in this domain one was created using elements of the theory based evaluation method and concepts from literature. All national energy performance instruments operating at the time that could influence energy  performance improvement for space and water heating in existing dwellings were included in the evaluation. Data was obtained from face to face semi-structured interviews with 19 stakeholders involved in lobbying, designing, implementing and evaluating instruments. Interviewee data was complemented with secondary sources, including; evaluations of the national climate change programme, evaluations of individual instruments, cross country evaluations and European projects in which the Netherlands participated. An online survey of owner-occupiers covering the same instruments as the characterization and assessment of instruments described above was conducted to expand the investigation into instruments. More than 5,000 Dutch owner-occupiers participated in the survey. The survey consisted of 96 questions about energy saving measures adopted within the years preceding the survey. The focus lay on measures that involved significant investment to reduce energy consumed for space and water

  2. Assessing the local windfield with instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Zambrano, T.G.

    1980-10-01

    This report concerns the development and testing of a technique for the initial screening and evaluation of potential sites for wind-energy conversion systems (WECS). The methodology was developed through a realistic siting exercise. The siting exercise involved measurements of winds along the surface and winds aloft using a relatively new instrument system, the Tethered Aerodynamic Lifting Anemometer (TALA) kite; notation of ecological factors such as vegetation flagging, soil erosion and site exposure, and verification of an area best suited for wind-energy development by establishing and maintaining a wind monitoring network. The siting exercise was carried out in an approximately 100-square-mile region of the Tehachapi Mountains of Southern California. The results showed that a comprehensive site survey involving field measurements, ecological survey, and wind-monitoring can be an effective tool for preliminary evaluation of WECS sites.

  3. Entropy-based consistent model driven architecture

    Science.gov (United States)

    Niepostyn, Stanisław Jerzy

    2016-09-01

    A description of software architecture is a plan of the IT system construction, therefore any architecture gaps affect the overall success of an entire project. The definitions mostly describe software architecture as a set of views which are mutually unrelated, hence potentially inconsistent. Software architecture completeness is also often described in an ambiguous way. As a result most methods of IT systems building comprise many gaps and ambiguities, thus presenting obstacles for software building automation. In this article the consistency and completeness of software architecture are mathematically defined based on calculation of entropy of the architecture description. Following this approach, in this paper we also propose our method of automatic verification of consistency and completeness of the software architecture development method presented in our previous article as Consistent Model Driven Architecture (CMDA). The proposed FBS (Functionality-Behaviour-Structure) entropy-based metric applied in our CMDA approach enables IT architects to decide whether the modelling process is complete and consistent. With this metric, software architects could assess the readiness of undergoing modelling work for the start of IT system building. It even allows them to assess objectively whether the designed software architecture of the IT system could be implemented at all. The overall benefit of such an approach is that it facilitates the preparation of complete and consistent software architecture more effectively as well as it enables assessing and monitoring of the ongoing modelling development status. We demonstrate this with a few industry examples of IT system designs.

  4. An internally consistent gamma ray burst time history phenomenology

    Science.gov (United States)

    Cline, T. L.

    1985-01-01

    A phenomenology for gamma ray burst time histories is outlined. Order of their generally chaotic appearance is attempted, based on the speculation that any one burst event can be represented above 150 keV as a superposition of similarly shaped increases of varying intensity. The increases can generally overlap, however, confusing the picture, but a given event must at least exhibit its own limiting characteristic rise and decay times if the measurements are made with instruments having adequate temporal resolution. Most catalogued observations may be of doubtful or marginal utility to test this hypothesis, but some time histories from Helios-2, Pioneer Venus Orbiter and other instruments having one-to several-millisecond capabilities appear to provide consistency. Also, recent studies of temporally resolved Solar Maximum Mission burst energy spectra are entirely compatible with this picture. The phenomenology suggested here, if correct, may assist as an analytic tool for modelling of burst processes and possibly in the definition of burst source populations.

  5. Incidence of instrument separation using LightSpeed rotary instruments.

    Science.gov (United States)

    Knowles, Kenneth I; Hammond, Nathan B; Biggs, Stephen G; Ibarrola, Jose L

    2006-01-01

    The use of nickel-titanium rotary instrument systems has gained popularity over the past 10 years. One of these instrument systems is the LightSpeed (LightSpeed Technology, Inc, San Antonio, TX). One drawback for all nickel-titanium rotary instruments is the incidence of instrument separation. The purpose of this study was to evaluate the incidence of nonretrievable instrument separation using the LightSpeed system in a clinical setting. A total of 3543 canals were treated over a 24 month period and during that time, 46 LightSpeed instruments were separated and found to be nonretrievable, resulting in a separation rate of 1.30%. This rate was lower than previous reported studies.

  6. Tool – Material, Metaphor – Metonymy, Instrument(ness)

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Breinbjerg, Morten; Pold, Søren

    2008-01-01

    This paper, presents in an abbreviated form the argument presented in an earlier paper[1], and tries to relate it to the theme, "retro in the interface". We introduce the concept instrumentness as a quality of human-computer interfaces. Instrumentness points to the way musical instruments are con...... pointing to alternative values, differing from traditional usability, which are also relevant in creative work outside art and music composition.......This paper, presents in an abbreviated form the argument presented in an earlier paper[1], and tries to relate it to the theme, "retro in the interface". We introduce the concept instrumentness as a quality of human-computer interfaces. Instrumentness points to the way musical instruments...... are controlled and conceptualized through values such as virtuosity and palyability, which are important for computer-mediated creative work supporting development in use beyond what is initially designed for. The papet performs a conceptual investigation into qualities in software interfaces that support...

  7. Consistency and Derangements in Brane Tilings

    CERN Document Server

    Hanany, Amihay; Ramgoolam, Sanjaye; Seong, Rak-Kyeong

    2015-01-01

    Brane tilings describe Lagrangians (vector multiplets, chiral multiplets, and the superpotential) of four dimensional $\\mathcal{N}=1$ supersymmetric gauge theories. These theories, written in terms of a bipartite graph on a torus, correspond to worldvolume theories on $N$ D$3$-branes probing a toric Calabi-Yau threefold singularity. A pair of permutations compactly encapsulates the data necessary to specify a brane tiling. We show that geometric consistency for brane tilings, which ensures that the corresponding quantum field theories are well behaved, imposes constraints on the pair of permutations, restricting certain products constructed from the pair to have no one-cycles. Permutations without one-cycles are known as derangements. We illustrate this formulation of consistency with known brane tilings. Counting formulas for consistent brane tilings with an arbitrary number of chiral bifundamental fields are written down in terms of delta functions over symmetric groups.

  8. Quantifying the consistency of scientific databases

    CERN Document Server

    Šubelj, Lovro; Boshkoska, Biljana Mileva; Kastrin, Andrej; Levnajić, Zoran

    2015-01-01

    Science is a social process with far-reaching impact on our modern society. In the recent years, for the first time we are able to scientifically study the science itself. This is enabled by massive amounts of data on scientific publications that is increasingly becoming available. The data is contained in several databases such as Web of Science or PubMed, maintained by various public and private entities. Unfortunately, these databases are not always consistent, which considerably hinders this study. Relying on the powerful framework of complex networks, we conduct a systematic analysis of the consistency among six major scientific databases. We found that identifying a single "best" database is far from easy. Nevertheless, our results indicate appreciable differences in mutual consistency of different databases, which we interpret as recipes for future bibliometric studies.

  9. Self-consistent Green's function approaches

    CERN Document Server

    Barbieri, Carlo

    2016-01-01

    We present the fundamental techniques and working equations of many-body Green's function theory for calculating ground state properties and the spectral strength. Green's function methods closely relate to other polynomial scaling approaches discussed in chapters~8 and ~10. However, here we aim directly at a global view of the many-fermion structure. We derive the working equations for calculating many-body propagators, using both the Algebraic Diagrammatic Construction technique and the self-consistent formalism at finite temperature. Their implementation is discussed, as well as the the inclusion of three-nucleon interactions. The self-consistency feature is essential to guarantee thermodynamic consistency. The paring and neutron matter models introduced in previous chapters are solved and compared with the other methods in this book.

  10. Personalized recommendation based on unbiased consistence

    Science.gov (United States)

    Zhu, Xuzhen; Tian, Hui; Zhang, Ping; Hu, Zheng; Zhou, Tao

    2015-08-01

    Recently, in physical dynamics, mass-diffusion-based recommendation algorithms on bipartite network provide an efficient solution by automatically pushing possible relevant items to users according to their past preferences. However, traditional mass-diffusion-based algorithms just focus on unidirectional mass diffusion from objects having been collected to those which should be recommended, resulting in a biased causal similarity estimation and not-so-good performance. In this letter, we argue that in many cases, a user's interests are stable, and thus bidirectional mass diffusion abilities, no matter originated from objects having been collected or from those which should be recommended, should be consistently powerful, showing unbiased consistence. We further propose a consistence-based mass diffusion algorithm via bidirectional diffusion against biased causality, outperforming the state-of-the-art recommendation algorithms in disparate real data sets, including Netflix, MovieLens, Amazon and Rate Your Music.

  11. A Revisit to Probability - Possibility Consistency Principles

    Directory of Open Access Journals (Sweden)

    Mamoni Dhar

    2013-03-01

    Full Text Available In this article, our main intention is to highlight the fact that the probable links between probability and possibility which were established by different authors at different point of time on the basis of some well known consistency principles cannot provide the desired result. That is why the paper discussed some prominent works for transformations between probability and possibility and finally aimed to suggest a new principle because none of the existing principles because none of them found the unique transformation. The new consistency principle which is suggested hereby would in turn replace all others that exist in the literature references by providing a reliable estimate of consistency between the two.Furthermore some properties of entropy of fuzzy numbers are also presented in this article.

  12. The positive mental health instrument: development and validation of a culturally relevant scale in a multi-ethnic asian population

    Directory of Open Access Journals (Sweden)

    Vaingankar Janhavi

    2011-10-01

    Full Text Available Abstract Background Instruments to measure mental health and well-being are largely developed and often used within Western populations and this compromises their validity in other cultures. A previous qualitative study in Singapore demonstrated the relevance of spiritual and religious practices to mental health, a dimension currently not included in exiting multi-dimensional measures. The objective of this study was to develop a self-administered measure that covers all key and culturally appropriate domains of mental health, which can be applied to compare levels of mental health across different age, gender and ethnic groups. We present the item reduction and validation of the Positive Mental Health (PMH instrument in a community-based adult sample in Singapore. Methods Surveys were conducted among adult (21-65 years residents belonging to Chinese, Malay and Indian ethnicities. Exploratory and confirmatory factor analysis (EFA, CFA were conducted and items were reduced using item response theory tests (IRT. The final version of the PMH instrument was tested for internal consistency and criterion validity. Items were tested for differential item functioning (DIF to check if items functioned in the same way across all subgroups. Results: EFA and CFA identified six first-order factor structure (General coping, Personal growth and autonomy, Spirituality, Interpersonal skills, Emotional support, and Global affect under one higher-order dimension of Positive Mental Health (RMSEA = 0.05, CFI = 0.96, TLI = 0.96. A 47-item self-administered multi-dimensional instrument with a six-point Likert response scale was constructed. The slope estimates and strength of the relation to the theta for all items in each six PMH subscales were high (range:1.39 to 5.69, suggesting good discrimination properties. The threshold estimates for the instrument ranged from -3.45 to 1.61 indicating that the instrument covers entire spectrums for the six dimensions. The

  13. The OmegaCAM 16K x 16K CCD detector system for the ESO VLT Survey Telescope (VST)

    NARCIS (Netherlands)

    Iwert, Olaf; Baade, D.; Balestra, A.; Baruffolo, A.; Bortolussi, A.; Christen, F.; Cumani, C.; Deiries, S.; Downing, M.; Geimer, C.; Hess, G.; Hess, J.; Kuijken, K.; Lizon, J.; Muschielok, B.; Nicklas, H.; Reiss, R.; Reyes, J.; Silber, A.; Thillerup, J.; Valentijn, E.; Dorn, David A.; Holland, Andrew D.

    2006-01-01

    A 16K x 16K, 1 degree x 1 degree field, detector system was developed by ESO for the OmegaCAM instrument for use on the purpose built ESO VLT Survey Telescope (VST). The focal plane consists of an 8 x 4 mosaic of 2K x 4K 15um pixel e2v CCDs and four 2K x 4K CCDs on the periphery for the opto-mechani

  14. UFMG Sydenham's chorea rating scale (USCRS): reliability and consistency.

    Science.gov (United States)

    Teixeira, Antônio Lúcio; Maia, Débora P; Cardoso, Francisco

    2005-05-01

    Despite the renewed interest in Sydenham's chorea (SC) in recent years, there were no valid and reliable scales to rate the several signs and symptoms of patients with SC and related disorders. The Universidade Federal de Minas Gerais (UFMG) Sydenham's Chorea Rating Scale (USCRS) was designed to provide a detailed quantitative description of the performance of activities of daily living, behavioral abnormalities, and motor function of subjects with SC. The scale comprises 27 items and each one is scored from 0 (no symptom or sign) to 4 (severe disability or finding). Data from 84 subjects, aged 4.9 to 33.6 years, support the interrater reliability and internal consistency of the scale. The USCRS is a promising instrument for rating the clinical features of SC as well as their functional impact in children and adults.

  15. Student Engagement: Developing a Conceptual Framework and Survey Instrument

    Science.gov (United States)

    Burch, Gerald F.; Heller, Nathan A.; Burch, Jana J.; Freed, Rusty; Steed, Steve A.

    2015-01-01

    Student engagement is considered to be among the better predictors of learning, yet there is growing concern that there is no consensus on the conceptual foundation. The authors propose a conceptualization of student engagement grounded in A. W. Astin's (1984) Student Involvement Theory and W. A. Kahn's (1990) employee engagement research where…

  16. Student Engagement: Developing a Conceptual Framework and Survey Instrument

    Science.gov (United States)

    Burch, Gerald F.; Heller, Nathan A.; Burch, Jana J.; Freed, Rusty; Steed, Steve A.

    2015-01-01

    Student engagement is considered to be among the better predictors of learning, yet there is growing concern that there is no consensus on the conceptual foundation. The authors propose a conceptualization of student engagement grounded in A. W. Astin's (1984) Student Involvement Theory and W. A. Kahn's (1990) employee engagement research where…

  17. PEP surveying procedures and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Linker, F.

    1982-06-01

    The PEP Survey and Alignment System, which employs both laser-based and optical survey methods, is described. The laser is operated in conjunction with the Tektronix 4051 computer and surveying instruments such as ARM and SAM, system which is designed to automate data input, reduction, and production of alignment instructions. The laser system is used when surveying ring quadrupoles, main bend magnets, sextupoles, and is optional when surveying RF cavities and insertion quadrupoles. Optical methods usually require that data be manually entered into the computer for alignment, but in some cases, an element can be aligned using nominal values of fiducial locations without use of the computer. Optical surveying is used in the alignment of NIT and SIT, low field bend magnets, wigglers, RF cavities, and insertion quadrupoles.

  18. Consistent matter couplings for Plebanski gravity

    CERN Document Server

    Tennie, Felix

    2010-01-01

    We develop a scheme for the minimal coupling of all standard types of tensor and spinor field matter to Plebanski gravity. This theory is a geometric reformulation of vacuum general relativity in terms of two-form frames and connection one-forms, and provides a covariant basis for various quantization approaches. Using the spinor formalism we prove the consistency of the newly proposed matter coupling by demonstrating the full equivalence of Plebanski gravity plus matter to Einstein--Cartan gravity. As a byproduct we also show the consistency of some previous suggestions for matter actions.

  19. Consistent matter couplings for Plebanski gravity

    Science.gov (United States)

    Tennie, Felix; Wohlfarth, Mattias N. R.

    2010-11-01

    We develop a scheme for the minimal coupling of all standard types of tensor and spinor field matter to Plebanski gravity. This theory is a geometric reformulation of vacuum general relativity in terms of two-form frames and connection one-forms, and provides a covariant basis for various quantization approaches. Using the spinor formalism we prove the consistency of the newly proposed matter coupling by demonstrating the full equivalence of Plebanski gravity plus matter to Einstein-Cartan gravity. As a by-product we also show the consistency of some previous suggestions for matter actions.

  20. Focal Plane Instrumentation of VERITAS

    CERN Document Server

    Nagai, T; Sleege, G; Petry, D

    2007-01-01

    VERITAS is a new atmospheric Cherenkov imaging telescope array to detect very high energy gamma rays above 100 GeV. The array is located in southern Arizona, USA, at an altitude of 1268m above sea level. The array consists of four 12-m telescopes of Davies-Cotton design and structurally resembling the Whipple 10-m telescope. The four focal plane instruments are equipped with high-resolution (499 pixels) fast photo-multiplier-tube (PMT) cameras covering a 3.5 degree field of view with 0.15 degree pixel separation. Light concentrators reduce the dead-space between PMTs to 25% and shield the PMTs from ambient light. The PMTs are connected to high-speed preamplifiers allowing operation at modest anode current and giving good single photoelectron peaks in situ. Electronics in the focus box provides real-time monitoring of the anode currents for each pixel and ambient environmental conditions. A charge injection subsystem installed in the focus box allows daytime testing of the trigger and data acquisition system b...

  1. Development of autonomous triggering instrumentation

    Science.gov (United States)

    Watkins, Steve E.; Swift, Theresa M.; Fonda, James W.

    2008-03-01

    Triggering instrumentation for autonomous monitoring of load-induced strain is described for economical, fast bridge inspection. The development addresses one aspect for the management of transportation infrastructure - bridge monitoring and inspection. The objectives are to provide quantitative performance information from a load test, to minimize the setup time at the bridge, and to minimize the closure time to traffic. Multiple or networked measurements can be made for a prescribed loading sequence. The proposed smart system consists of in-situ strain sensors, an embedded data acquisition module, and a measurement triggering system. A companion control unit is mounted on the truck serving as the load. As the truck moves to the proper position, the desired measurement is automatically relayed back to the control unit. In this work, the testing protocol is developed and the performance parameters for the triggering and data acquisition are measured. The test system uses a dedicated wireless sensor mote and an infrared positioning system. The electronic procedure offers improvements in available information and economics.

  2. Ex-core instrumentation; Instrumentation hors coeur des reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    Burel, J.P. [Schneider Electric S.A., 92 - Boulogne-Billancourt (France)

    1999-01-01

    The safety and the control of the reactor need to master the nuclear power from the core radiation measurement. According to the reactor dimensions and conception, the nuclear parameters monitoring is realized through two instrumentation systems: the ex-core instrumentation system which use detector placed outside of the core and the in-core instrumentation system. This paper deals with the ex-core systems based on neutronic measurements and details the detectors choice, the treatment circuits, data processing, realizations in France and also example of the Wwr reactor instrumentation. (A.L.B.)

  3. Spectroscopic Instrumentation in Undergraduate Astronomy Laboratories

    Science.gov (United States)

    Ludovici, Dominic; Mutel, Robert Lucien; Lang, Cornelia C.

    2017-01-01

    We have designed and built two spectrographs for use in undergraduate astronomy laboratories at the University of Iowa. The first, a low cost (appx. $500) low resolution (R ~ 150 - 300) grating-prism (grism) spectrometer consists of five optical elements and is easily modified to other telescope optics. The grism spectrometer is designed to be used in a modified filter wheel. This type of spectrometer allows students to undertake projects requiring sensitive spectral measurements, such as determining the redshifts of quasars. The second instrument is a high resolution (R ~ 8000), moderate cost (appx. $5000) fiber fed echelle spectrometer. The echelle spectrometer will allow students to conduct Doppler measurements such as those used to study spectroscopic binaries. Both systems are designed to be used with robotic telescope systems. The availability of 3D printing enables both of these spectrographs to be constructed in hands-on instrumentation courses where students build and commission their own instruments. Additionally, these instruments enable introductory majors and non-majors laboratory students to gain experience conducting their own spectroscopic observations.

  4. Consistency in multi-viewpoint architectural design

    NARCIS (Netherlands)

    Dijkman, R.M.; Dijkman, Remco Matthijs

    2006-01-01

    This thesis presents a framework that aids in preserving consistency in multi-viewpoint designs. In a multi-viewpoint design each stakeholder constructs his own design part. We call each stakeholder’s design part the view of that stakeholder. To construct his view, a stakeholder has a viewpoint.

  5. Consistency and stability of recombinant fermentations.

    Science.gov (United States)

    Wiebe, M E; Builder, S E

    1994-01-01

    Production of proteins of consistent quality in heterologous, genetically-engineered expression systems is dependent upon identifying the manufacturing process parameters which have an impact on product structure, function, or purity, validating acceptable ranges for these variables, and performing the manufacturing process as specified. One of the factors which may affect product consistency is genetic instability of the primary product sequence, as well as instability of genes which code for proteins responsible for post-translational modification of the product. Approaches have been developed for mammalian expression systems to assure that product quality is not changing through mechanisms of genetic instability. Sensitive protein analytical methods, particularly peptide mapping, are used to evaluate product structure directly, and are more sensitive in detecting genetic instability than is direct genetic analysis by nucleotide sequencing of the recombinant gene or mRNA. These methods are being employed to demonstrate that the manufacturing process consistently yields a product of defined structure from cells cultured through the range of cell ages used in the manufacturing process and well beyond the maximum cell age defined for the process. The combination of well designed validation studies which demonstrate consistent product quality as a function of cell age, and rigorous quality control of every product lot by sensitive protein analytical methods provide the necessary assurance that product structure is not being altered through mechanisms of mutation and selection.

  6. Developing consistent time series landsat data products

    Science.gov (United States)

    The Landsat series satellite has provided earth observation data record continuously since early 1970s. There are increasing demands on having a consistent time series of Landsat data products. In this presentation, I will summarize the work supported by the USGS Landsat Science Team project from 20...

  7. Developing consistent pronunciation models for phonemic variants

    CSIR Research Space (South Africa)

    Davel, M

    2006-09-01

    Full Text Available from a lexicon containing variants. In this paper we (the authors) address both these issues by creating ‘pseudo-phonemes’ associated with sets of ‘generation restriction rules’ to model those pronunciations that are consistently realised as two or more...

  8. On Consistency Maintenance In Service Discovery

    NARCIS (Netherlands)

    Sundramoorthy, V.; Hartel, Pieter H.; Scholten, Johan

    2005-01-01

    Communication and node failures degrade the ability of a service discovery protocol to ensure Users receive the correct service information when the service changes. We propose that service discovery protocols employ a set of recovery techniques to recover from failures and regain consistency. We

  9. On Consistency Maintenance In Service Discovery

    NARCIS (Netherlands)

    Sundramoorthy, V.; Hartel, Pieter H.; Scholten, Johan

    Communication and node failures degrade the ability of a service discovery protocol to ensure Users receive the correct service information when the service changes. We propose that service discovery protocols employ a set of recovery techniques to recover from failures and regain consistency. We

  10. Consistent feeding positions of great tit parents

    NARCIS (Netherlands)

    Lessells, C.M.; Poelman, E.H.; Mateman, A.C.; Cassey, P.

    2006-01-01

    When parent birds arrive at the nest to provision their young, their position on the nest rim may influence which chick or chicks are fed. As a result, the consistency of feeding positions of the individual parents, and the difference in position between the parents, may affect how equitably food is

  11. Computing Rooted and Unrooted Maximum Consistent Supertrees

    CERN Document Server

    van Iersel, Leo

    2009-01-01

    A chief problem in phylogenetics and database theory is the computation of a maximum consistent tree from a set of rooted or unrooted trees. A standard input are triplets, rooted binary trees on three leaves, or quartets, unrooted binary trees on four leaves. We give exact algorithms constructing rooted and unrooted maximum consistent supertrees in time O(2^n n^5 m^2 log(m)) for a set of m triplets (quartets), each one distinctly leaf-labeled by some subset of n labels. The algorithms extend to weighted triplets (quartets). We further present fast exact algorithms for constructing rooted and unrooted maximum consistent trees in polynomial space. Finally, for a set T of m rooted or unrooted trees with maximum degree D and distinctly leaf-labeled by some subset of a set L of n labels, we compute, in O(2^{mD} n^m m^5 n^6 log(m)) time, a tree distinctly leaf-labeled by a maximum-size subset X of L that all trees in T, when restricted to X, are consistent with.

  12. Addendum to "On the consistency of MPS"

    CERN Document Server

    Souto-Iglesias, Antonio; González, Leo M; Cercos-Pita, Jose L

    2013-01-01

    The analogies between the Moving Particle Semi-implicit method (MPS) and Incompressible Smoothed Particle Hydrodynamics method (ISPH) are established in this note, as an extension of the MPS consistency analysis conducted in "Souto-Iglesias et al., Computer Physics Communications, 184(3), 2013."

  13. Proteolysis and consistency of Meshanger cheese

    NARCIS (Netherlands)

    Jong, de L.

    1978-01-01

    Proteolysis in Meshanger cheese, estimated by quantitative polyacrylamide gel electrophoresis is discussed. The conversion of α s1 -casein was proportional to rennet concentration in the cheese. Changes in consistency, after a maximum, were correlated to breakdown of

  14. On the existence of consistent price systems

    DEFF Research Database (Denmark)

    Bayraktar, Erhan; Pakkanen, Mikko S.; Sayit, Hasanjan

    2014-01-01

    We formulate a sufficient condition for the existence of a consistent price system (CPS), which is weaker than the conditional full support condition (CFS). We use the new condition to show the existence of CPSs for certain processes that fail to have the CFS property. In particular this condition...

  15. A self-consistent Maltsev pulse model

    Science.gov (United States)

    Buneman, O.

    1985-04-01

    A self-consistent model for an electron pulse propagating through a plasma is presented. In this model, the charge imbalance between plasma ions, plasma electrons and pulse electrons creates the travelling potential well in which the pulse electrons are trapped.

  16. Consistent implementation of decisions in the brain.

    Directory of Open Access Journals (Sweden)

    James A R Marshall

    Full Text Available Despite the complexity and variability of decision processes, motor responses are generally stereotypical and independent of decision difficulty. How is this consistency achieved? Through an engineering analogy we consider how and why a system should be designed to realise not only flexible decision-making, but also consistent decision implementation. We specifically consider neurobiologically-plausible accumulator models of decision-making, in which decisions are made when a decision threshold is reached. To trade-off between the speed and accuracy of the decision in these models, one can either adjust the thresholds themselves or, equivalently, fix the thresholds and adjust baseline activation. Here we review how this equivalence can be implemented in such models. We then argue that manipulating baseline activation is preferable as it realises consistent decision implementation by ensuring consistency of motor inputs, summarise empirical evidence in support of this hypothesis, and suggest that it could be a general principle of decision making and implementation. Our goal is therefore to review how neurobiologically-plausible models of decision-making can manipulate speed-accuracy trade-offs using different mechanisms, to consider which of these mechanisms has more desirable decision-implementation properties, and then review the relevant neuroscientific data on which mechanism brains actually use.

  17. Consistency in multi-viewpoint architectural design

    NARCIS (Netherlands)

    Dijkman, Remco Matthijs

    2006-01-01

    This thesis presents a framework that aids in preserving consistency in multi-viewpoint designs. In a multi-viewpoint design each stakeholder constructs his own design part. We call each stakeholder¿s design part the view of that stakeholder. To construct his view, a stakeholder has a viewpoint. Thi

  18. Properties and Update Semantics of Consistent Views

    Science.gov (United States)

    1985-09-01

    8217 PR.OPERTIES AND UPDATE SEMANTICS OF CONSISTENT VIEWS G. Gottlob Institute for Applied Mathematics C.N.H.., G<•nova, Italy Compnt.<•r Sden... Gottlob G., Paolini P., Zicari R., "Proving Properties of Programs ou Database Views", Dipartiuwnto di Elcttronica, Politecnko di Milano (in

  19. Consistency Analysis of Network Traffic Repositories

    NARCIS (Netherlands)

    Lastdrager, Elmer; Pras, Aiko

    2009-01-01

    Traffic repositories with TCP/IP header information are very important for network analysis. Researchers often assume that such repositories reliably represent all traffic that has been flowing over the network; little thoughts are made regarding the consistency of these repositories. Still, for var

  20. Consistency of Network Traffic Repositories: An Overview

    NARCIS (Netherlands)

    Lastdrager, E.; Pras, A.

    2009-01-01

    Traffc repositories with TCP/IP header information are very important for network analysis. Researchers often assume that such repositories reliably represent all traffc that has been flowing over the network; little thoughts are made regarding the consistency of these repositories. Still, for vario