WorldWideScience

Sample records for survey detergent industry

  1. Industrial detergent wastewater treatment via fenton reagent

    International Nuclear Information System (INIS)

    Mohd Zairie Mohd Yusuff; Mohd Zulkifli Mohamad Noor; Izirwan Izhab

    2010-01-01

    Production of detergent can generates wastewater containing an organic matter with will consume an oxidation demand, surfactants, suspended solids, fat and oil. Besides, sulfate concentration is high in the most detergent plant effluent because of the sulphonation process that has physiological and toxic effects on marine organisms. Therefore, a research must be conducted to find the solution for this problem. The feasibility of Fentons reagent to treat detergent waste was investigated in this study. The sample of detergent wastewater was taken from FPG Oleo chemicals Sdn. Bhd. This experiment studied the effect of temperature towards the feasibility of Fentons reagent process besides the dosage between hydrogen peroxide (H 2 O 2 ) and ferrous ion (Fe 2+ ) in the reagent. While, evaluated efficiency of Fentons reagent in term of chemical oxygen demand (COD), total suspended solid (TSS) and the turbidity reduction within the experimental design. The result found that overall removal was achieved until 96.2 % in term of COD, 98.1 % in term of TSS and 99.6 % in term of turbidity using Fentons reagent process. Besides, also found that this process is optimum at temperature 35 degree Celsius are able to achieve the Standard A of Parameter Limit of Effluent of Standard A and Standard B were outlined by Department of Environment Malaysia (DOE) based on Environment Quality Act 1974. (author)

  2. Detergents

    Directory of Open Access Journals (Sweden)

    Ho Tan Tai Louis

    2001-03-01

    Full Text Available Surfactants are amphiphile molecules. They can be anionic, cationic, nonionic or amphoteric. They are among the main ingredients encountered in detergents and personal care products. They have to meet increasingly more stringent requirements of biodegradability and come from renewable raw materials. Anionic surfactants, particularly alkylbenzene sulfonates, are, at the present time, the most widely used surfactants in detergents and personal care products. Among the nonionics, those with ethyle oxide groups are the most common and those coming from entirely renewable raw materials, such as alkyl polyglucosides (APG, are expected to play an important role in the future

  3. Toxicity of Neatex (industrial detergent) and Norust CR 486 ...

    African Journals Online (AJOL)

    Populations of indigenous epigeic adult earthworms, Aporrectodea longa, were exposed to varying concentrations of two chemicals (industrial detergent and corrosion inhibitor) in natural soil to determine the acute toxicity of the chemicals. Earthworm acute toxicity test (OECD) 207 method was employed. After two weeks of ...

  4. Environmental impacts of detergents and benefits of their recovery in the laundering industry

    DEFF Research Database (Denmark)

    Giagnorio, Mattia; Amelio, Antonio; Grüttner, Henrik

    2017-01-01

    a life cycle analysis conducted on different detergents and industrial washing systems. In particular, detergent production, use, and feasible recovery in the laundering industry is evaluated. Detergent production shows wide impact distribution related to the various detergent sources, with a large...... influence on the ecosystem compared to the other impact categories. Calculations of the primary energy demand and the global warming potential reveal the fundamental role of the application of renewable resources in the detergent production phase. The calculated contribution of detergents in the overall......Detergents are important compounds in numerous industrial processes with laundering industry being among their largest consumers. Due to their wide application, detergents are continuously developed to meet higher quality and environmental standards. Following this trend, this study discusses...

  5. The potential application of fungus Trichoderma harzianum Rifai in biodegradation of detergent and industry

    Directory of Open Access Journals (Sweden)

    Jakovljević Violeta D.

    2015-01-01

    Full Text Available The potential application of fungus Trichoderma harzianum Rifai in biodegradation of commercial detergent (MERIX, Henkel, Serbia was in the focus of this study. The fungus was isolated from wastewater samples of the Rasina River, downstream where the industrial wastewaters of factory Henkel (Krusevac, Serbia discharge into river. The fungus was cultivated in liquid growth medium by Czapek with addition of detergent at a concentration of 0.3% during 16 days. Analysis of fermentation broth evaluated the chemical and biochemical changes of pH, redox potential, activity of alkaline and acid invertase as well as activity of alkaline protease. In addition, the influence of detergent on fungal growth and total dry weight biomass was determined. At the same time, detergent disappearance in terms of methylene blue active substances in the medium was measured. The detergent at a concentration of 0.3% influenced significant decrease of pH value and increase of redox potential. The detergent showed inhibitory effect on acid invertase activity and stimulatory effect on alkaline invertase and protease activity. The fungus decomposed about 74.24% of tested detergent during 16 days, but total dry weight biomass reduced about 20% in relation to control. [Projekat Ministarstva nauke Republike Srbije, br. III 43004

  6. Toxicity of Neatex (industrial detergent) and Norust CR 486 ...

    African Journals Online (AJOL)

    GRACE

    2006-06-02

    Jun 2, 2006 ... strictly asking industrial operators to sustainably manage the disposal of ... Toxicity modifying factors considered were exposure duration and mortality. The test .... soils is bond to expose organisms living and breeding there to ...

  7. Minerals industry survey, 1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    This is the seventh edition of the statistical survey commissioned by the Australian Mining Industry Council. It represents the most comprehensive review of the financial position of the Australian minerals industry and provides timely financial data on the minerals industry. The tables of this survey have been prepared for AMIC by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies. For the purpose of the survey, the minerals industry has been defined as including exploration for, and extraction and primary processing of, minerals in Australia. The oil and gas industry is not included.

  8. Minerals industry survey 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This is the eleventh Minerals Industry Survey produced by the Australian Mining Industry Council. It represents an invaluable time series on the minerals industry's financial performance, as well as an up to date description of the industry for the latest financial year. The survey has been conceived as a supplement to and expansion of the various Australian Bureau of Statistics and Bureau of Mineral Resources, Geology and Geophysics publications which describe the exploration, mining and smelting and refining industries in Australia. The tables in this survey have been prepared by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies.

  9. Industry Based Monkfish Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Monkfish industry leaders expressed concerns that the NEFSC bottom trawl surveys did not sample in all monkfish habitats; particularly the deeper water outside the...

  10. Commercial Banking Industry Survey.

    Science.gov (United States)

    Bright Horizons Children's Centers, Cambridge, MA.

    Work and family programs are becoming increasingly important in the commercial banking industry. The objective of this survey was to collect information and prepare a commercial banking industry profile on work and family programs. Fifty-nine top American commercial banks from the Fortune 500 list were invited to participate. Twenty-two…

  11. Industrial energy thrift scheme. Energy use in the soap and detergents industry. Report No. 10

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    An examination was made of how energy is used in the manufacture of soap, detergents, and candles and in the processes of fat splitting and distillation. Twenty-four factories were visited and data are compiled on total amount of energy used, possible energy savings, total amounts of energy purchased, estimated potential savings in space heating energy, and energy savings good housekeeping could yield. (MCW)

  12. 2012 Mask Industry Survey

    Science.gov (United States)

    Malloy, Matt; Litt, Lloyd C.

    2012-11-01

    A survey supported by SEMATECH and administered by David Powell Consulting was sent to semiconductor industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. 2012 marks the 11th consecutive year for the mask industry survey. This year's survey and reporting structure are similar to those of the previous years with minor modifications based on feedback from past years and the need to collect additional data on key topics. Categories include general mask information, mask processing, data and write time, yield and yield loss, delivery times, and maintenance and returns. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. Results, initial observations, and key comparisons between the 2011 and 2012 survey responses are shown here, including multiple indications of a shift towards the manufacturing of higher end photomasks.

  13. Effects of industrial detergents on the barrier function of human skin

    DEFF Research Database (Denmark)

    Nielsen, G D; Nielsen, Jesper Bo; Andersen, Klaus Ejner

    2000-01-01

    Detergents are involved in the causation of contact dermatitis and in promoting percutaneous absorption of toxic chemicals, but limited information is available to allow an assessment of their relative effects on the skin barrier function. The effect of detergents on skin permeability to water...

  14. 2013 mask industry survey

    Science.gov (United States)

    Malloy, Matt

    2013-09-01

    A comprehensive survey was sent to merchant and captive mask shops to gather information about the mask industry as an objective assessment of its overall condition. 2013 marks the 12th consecutive year for this process. Historical topics including general mask profile, mask processing, data and write time, yield and yield loss, delivery times, maintenance, and returns were included and new topics were added. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. While each year's survey includes minor updates based on feedback from past years and the need to collect additional data on key topics, the bulk of the survey and reporting structure have remained relatively constant. A series of improvements is being phased in beginning in 2013 to add value to a wider audience, while at the same time retaining the historical content required for trend analyses of the traditional metrics. Additions in 2013 include topics such as top challenges, future concerns, and additional details in key aspects of mask masking, such as the number of masks per mask set per ground rule, minimum mask resolution shipped, and yield by ground rule. These expansions beyond the historical topics are aimed at identifying common issues, gaps, and needs. They will also provide a better understanding of real-life mask requirements and capabilities for comparison to the International Technology Roadmap for Semiconductors (ITRS).

  15. Industry Based Survey (IBS) Cod

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The "Gulf of Maine Atlantic Cod Industry-Based Survey" was a collaboration of the Massachusetts Division of Marine Fisheries and the fishing industry, with support...

  16. Histopathology of Inhalation of Industrial Bleach and Detergent Mixture on Epithelial Layer of Trachea in Mice

    Directory of Open Access Journals (Sweden)

    Gh. Vaezi

    2011-11-01

    Full Text Available This study is the effects of inhalation toxic mixture of bleach and detergent was examined on the epithelial layer of trachea in the mice. In this study, 42 adult male mice NMRI race weighing 35-40 gr and from age 8 to 10 weeks were divided into 6 experimental groups and one control group. Experimental groups 1-2-3 with the using of chamber, as inhalation 20 minutes were exposure to spray the amount 1 cc of mixture of bleach and detergent by nebulizer. Experimental groups 4-5-6 were for 35 minutes to inhale the same amount of material. Mice killed at 24-48-72 hours after inhalation and the trachea was studied pathology. In microscopic sections of tissue taken from the trachea the experimental group compared with the control group was changed to include: stimulation and activation of the respiratory epithelium hungarian (Mocusa layer, reducing the length of ciliated columnar cells, reducing the number of goblet cells ,loss of cilia, chaos and clutter on the order of tissue. In addition, statistically, the changes in length of ciliated columnar epithelium cells in experimental groups 3 and 6 seen significantly decreased than control group and the number of experimental groups 2 and 4 goblet cells significantly increased compared to control group, experimental group 6 was significantly decreased than the control group. As a result discussion, increasing the inhalation time of mixing bleach and detergent, also as time passed, cause to increase the tissue damage and changes.

  17. Industrial coal survey

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-25

    UK industrial coal sales were down 400,000t to 7.1mt in 1991. This was largely due to fall in cement purchases as the construction industry was badly hit in the recession. Increased competition from petroleum coke also had an effect. A brief roundup is presented of sales to the UK's major coal buyers: Alcan, ICI, Blue Circle, Castle Cement, Rugby Cement, British Steel, UK Paper, Courtaulds, Unilever, AHS Emstar, Tate Lyle, and British Sugar. 1 tab.

  18. Industry Based Survey (IBS) Yellowtail

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The "Southern New England Yellowtail Flounder Industry-Based Survey" was a collaboration between the Rhode Island Division of Fish and Wildlife and the fishing...

  19. Special survey: mining industry

    International Nuclear Information System (INIS)

    Preece, H.

    1981-01-01

    South Africa is now the world's second biggest producer of non-oil minerals after the United States and far ahead of Canada and Australia, according to the author. South Africa's economic growth prospects over the 1980's are inevitably crucially dependent on the mining industry. The production and economics of various minerals are discussed, with special reference to gold, coal, diamonds, uranium, platinum, manganese, copper and asbestos

  20. Lung function, atopy, specific hypersensitivity, and smoking of workers in the enzyme detergent industry over 11 years.

    Science.gov (United States)

    Flood, D F; Blofeld, R E; Bruce, C F; Hewitt, J I; Juniper, C P; Roberts, D M

    1985-01-01

    A study of 2800 workers employed in three factories of the two major manufacturers of enzymatic products in the United Kingdom covering 11 years of operation from 1969 to 1980 showed that 2344 workers had sufficient lung function data to meet the operational criteria and these were analysed in three separate groups by factory locations. Spirometry and prick tests for specific skin reactions to standardised enzyme were performed at six monthly intervals for the first six years of the study and then annually. Factory enzyme dust and total dust measurements were made to determine the degree of dust exposure of the subjects. The lung function of the factory groups was analysed for the effects of working in the detergent industry, the degree of exposure to enzymes, skin prick test positivity to enzymes, atopicity, and smoking. The 4.5% of workers who had experienced respiratory effects from enzymes were analysed separately. Exposure to the enzyme allergen has had no significant long term effect on the lung function of the detergent workers. A higher proportion of atopics than non-atopics became skin test positive to the allergen and more smokers than non-smokers were sensitised. The overall lung function of detergent workers showed 39 ml/year loss in FEV1 on the 11 year longitudinal study and 51 ml/year loss on the lateral (cross sectional) analysis with better lung function in the south east than the north west of England. In the development of the methodology for the study several potential problems were discovered that could remain unrecognised in a cross sectional analysis performed in isolation.

  1. Minerals Industry' 97. Survey report

    International Nuclear Information System (INIS)

    1997-01-01

    The aim of this annual survey is to provide timely and accurate financial data such as production, price movements, profitability, distribution of assets by activity, employment and labour cost and taxation on the Australian minerals industry. It aims to facilitate more informed debate on the industry's role and importance in the economy. The report also includes information on the safety and health performance and overseas exploration expenditure of the minerals industry. This twenty-first survey relates to the year ended 30 June 1997. The proportion of activity covered in this year's survey is comparable with the 1996 survey. The mineral industry is defined as including exploration for, extraction and primary processing of minerals in Australia. The oil, gas, iron and steel industries are excluded. As for the uranium industry, increased mine capacity over the medium term saw a switch away from spot market purchases to long term contracts for uranium in 1996. This, coupled with announced releases from the US stockpile, saw downward pressure on spot market prices for uranium during 1996/97. The average spot market price for U 3 O 8 fell by an average of 6 percent during 1996/97 and was approximately 16 percent lower than three years ago. General uncertainty over the future profitability of coal industry is compounded by the likely softness of future coal prices

  2. Carotene-degrading activities from Bjerkandera adusta possess an application in detergent industries.

    Science.gov (United States)

    Linke, Diana; Leonhardt, Robin; Eisele, Nadine; Petersen, Laura M; Riemer, Stephanie; Nimtz, Manfred; Berger, Ralf G

    2015-06-01

    Four extracellular enzymes, a versatile peroxidase, a manganese peroxidase, a dye-decolorizing peroxidase and a lignin peroxidase were discovered in liquid cultures of the basidiomycete Bjerkandera adusta. All of them cleaved β-carotene effectively. Expression was enhanced in the presence of β-carotene or Coomassie Brilliant Blue and peaked after 7-9 days. The monomeric proteins were purified by ion exchange and size exclusion chromatography and exhibited molecular masses of 41, 43, 51 and 43 kDa, respectively. The coding sequences showed homologies from 61 to 89 % to peroxidases from other basidiomycetes. The novel enzymes retained strong activity even in the absence of hydrogen peroxide and at alkaline pH. De-staining of fabrics using detergent-tolerant enzymes may help to save the most important bio-resources, energy and water, in washing processes and led to green processes in textile cleaning.

  3. Size Distribution of Inorganic Species and Their Inhaled Dose in a Detergent Industrial

    Czech Academy of Sciences Publication Activity Database

    Karanasiou, A.; Eleftheriadis, K.; Vratolis, S.; Zarbas, P.; Mihalopoulos, N.; Mitsakou, C.; Housiadas, C.; Lazaridis, M.; Ondráček, Jakub; Ondráčková, Lucie

    2008-01-01

    Roč. 8, č. 1 (2008), s. 71-76 ISSN 1567-7230 Institutional research plan: CEZ:AV0Z40720504 Keywords : industrial workplace * indoor aerosol * exposure Subject RIV: CI - Industrial Chemistry, Chemical Engineering

  4. Detergent-compatible bacterial amylases.

    Science.gov (United States)

    Niyonzima, Francois N; More, Sunil S

    2014-10-01

    Proteases, lipases, amylases, and cellulases are enzymes used in detergent formulation to improve the detergency. The amylases are specifically supplemented to the detergent to digest starchy stains. Most of the solid and liquid detergents that are currently manufactured contain alkaline enzymes. The advantages of using alkaline enzymes in the detergent formulation are that they aid in removing tough stains and the process is environmentally friendly since they reduce the use of toxic detergent ingredients. Amylases active at low temperature are preferred as the energy consumption gets reduced, and the whole process becomes cost-effective. Most microbial alkaline amylases are used as detergent ingredients. Various reviews report on the production, purification, characterization, and application of amylases in different industry sectors, but there is no specific review on bacterial or fungal alkaline amylases or detergent-compatible amylases. In this mini-review, an overview on the production and property studies of the detergent bacterial amylases is given, and the stability and compatibility of the alkaline bacterial amylases in the presence of the detergents and the detergent components are highlighted.

  5. Survey of industrial radioisotope savings

    International Nuclear Information System (INIS)

    1965-01-01

    Only three decades after the discovery of artificial radioactivity and two after radioisotopes became available in quantity, methods employing these as sources or tracers have found widespread use, not only in scientific research, but also in industrial process and product control. The sums spent by industry on these new techniques amount to millions of dollars a year. Realizing the overall attitude of industry to scientific progress - to accept only methods that pay relatively quickly - one can assume that the economic benefits must be of a still larger order of magnitude. In order to determine the extent to which radioisotopes are in daily use and to evaluate the economic benefits derived from such use, IAEA decided to make an 'International Survey on the Use of Radioisotopes in Industry'. In 1962, the Agency invited a number of its highly industrialized Member States to participate in this Survey. Similar surveys had been performed in various countries in the 1950's. However, the approaches and also the definition of the economic benefits differed greatly from one survey to another. Hence, the Agency's approach was to try to persuade all countries to conduct surveys at the same time, concerning the same categories of industries and using the same terms of costs, savings, etc. In total, 24 Member States of the Agency agreed to participate in the survey and in due course they submitted contributions. The national reports were discussed at a 'Study Group Meeting on Radioisotope Economics', convened in Vienna in March 1964. Based upon these discussions, the national reports have been edited and summarized. A publication showing the administration of the Survey and providing all details is now published by the Agency. From the publication it is evident that in general the return of technical information was quite high, of the order of 90%, but, unfortunately the economic response was much lower. However, most of the reports had some bearing on the economic aspects

  6. Current best practice for the health surveillance of enzyme workers in the soap and detergent industry.

    Science.gov (United States)

    Nicholson, P J; Newman Taylor, A J; Oliver, P; Cathcart, M

    2001-03-01

    This study defines current best practice for the health surveillance of workers who are potentially exposed to enzymes in the manufacture of enzymatic detergent products. It is recommended that health surveillance is performed 6-monthly for the first 2 years and annually thereafter. The health surveillance programme should include a respiratory questionnaire to detect symptoms, assessment of lung function to detect pre-symptomatic changes and an immunological test to detect specific immunoglobulin E (IgE) to enzymes. The International Union Against Tuberculosis and Lung Disease respiratory questionnaire should be used since it has been validated extensively for detecting asthma. Operators should observe the American Thoracic Society performance criteria for spirometers and standardized procedures for conducting spirometry. Since current airborne monitoring techniques for enzymes do not detect short-duration peak exposures, the incidence of employee sensitizations remains the most reliable measure of the integrity of environmental control. The Pepys skin prick test has been validated as a sensitive, specific and practical test for detecting specific IgE to many inhalant allergens including enzymes. For newly sensitized workers, a multi-cause investigation should be conducted to identify potential sources of exposure. Group results of immunological test results assist in the evaluation of workplace control measures, and should be used to monitor the effectiveness of hygiene and engineering programmes and to help prioritize areas for improvement. Positive responses to a questionnaire or abnormal spirometry should be assessed further. Occupational asthma should be excluded in any case of adult-onset asthma that starts or deteriorates during working life. This is particularly important because an accurate diagnosis of occupational asthma with early avoidance of exposure to its cause can result in remission of symptoms and restoration of lung function.

  7. Effects Aerosol of Industrial Bleach and Detergent Mixture on Mucosa Layer and Lamina Mucosa Conjunctiva in Mice

    Directory of Open Access Journals (Sweden)

    Gh. Vaezi

    2013-06-01

    Full Text Available Today bleach and detergents are being frequently used and some people use their mixture for more cleaning. Because of chemical interaction of bleach and detergent, chlorine gas was released and thereby it could be dangerous for human health. This study examined the effects of exposed toxic mixture of bleach and detergent on the Mucosa layer and Lamina mucosa conjunctiva in the mice. In this study, 42 adult male mice NMRI race weighing 35-40 gr and from age 8 to 10 weeks were divided into 6 experimental groups and one control group. Experimental groups 1-2-3 with the use of chamber, the exposed 20 minutes were exposed to spray the amount 1 cc of mixture of bleach and detergent by nebulizer. Experimental groups 4-5-6 were for 35 minutes to inhale the same amount of material. Mice killed at 24-48-72 hours after exposed and the Mucosa Layer and Lamina mucosa conjunctiva tissue was studied pathology. In the study of microscopic sections prepared of mouse mucosa layer and Lamina mucosa conjunctiva tissue experimental group comparison with the control group, significant decrease was observed in mucosa layer the have (p ≤ 0.001  and significant decrease was observed in the Lamina mucosa have(p ≤ 0. 01,  p ≤ 0.001. As a result, increasing the exposed time of mixing bleach and detergent, as time passed, increasing the tissue damage and changes.

  8. Electronic flight bag (EFB) : 2010 industry survey

    Science.gov (United States)

    2010-09-01

    This document provides an overview of Electronic Flight Bag (EFB) systems and capabilities, as of June 2010. This document updates and replaces the April 2007 EFB Industry Review (Yeh and Chandra, 2007). As with the previous industry survey, the focu...

  9. A survey of detergents for the purification of stable, active human cystic fibrosis transmembrane conductance regulator (CFTR).

    Science.gov (United States)

    Hildebrandt, Ellen; Zhang, Qinghai; Cant, Natasha; Ding, Haitao; Dai, Qun; Peng, Lingling; Fu, Yu; DeLucas, Lawrence J; Ford, Robert; Kappes, John C; Urbatsch, Ina L

    2014-11-01

    Structural knowledge of the cystic fibrosis transmembrane conductance regulator (CFTR) requires developing methods to purify and stabilize this aggregation-prone membrane protein above 1mg/ml. Starting with green fluorescent protein- and epitope-tagged human CFTR produced in mammalian cells known to properly fold and process CFTR, we devised a rapid tandem affinity purification scheme to minimize CFTR exposure to detergent in order to preserve its ATPase function. We compared a panel of detergents, including widely used detergents (maltosides, neopentyl glycols (MNG), C12E8, lysolipids, Chaps) and innovative detergents (branched alkylmaltosides, facial amphiphiles) for CFTR purification, function, monodispersity and stability. ATPase activity after reconstitution into proteoliposomes was 2-3 times higher when CFTR was purified using facial amphiphiles. ATPase activity was also demonstrated in purified CFTR samples without detergent removal using a novel lipid supplementation assay. By electron microscopy, negatively stained CFTR samples were monodisperse at low concentration, and size exclusion chromatography showed a predominance of monomer even after CFTR concentration above 1mg/ml. Rates of CFTR aggregation quantified in an electrophoretic mobility shift assay showed that detergents which best preserved reconstituted ATPase activity also supported the greatest stability, with CFTR monomer half-lives of 6-9days in MNG or Chaps, and 12-17days in facial amphiphile. Cryoelectron microscopy of concentrated CFTR in MNG or facial amphiphile confirmed mostly monomeric protein, producing low resolution reconstructions in conformity with similar proteins. These protocols can be used to generate samples of pure, functional, stable CFTR at concentrations amenable to biophysical characterization. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Survey on industrial applications of radioactive tracers

    International Nuclear Information System (INIS)

    Kim, Jae Rok; Yoo, Young Soo; Lee, Jong Doo; Awh, Ok Doo; Kim, Jun Hyung

    1986-12-01

    Current status and future feasibilities of industrial tracer applications in the Republic of Korea have been surveyed. Microleak detection using Krypton-85 in eight electronics industrial companies, and efficiency tests of steam generators in four nuclear power plants using Sodium-24 are the principal applications in Korea. Future applications are expected for mercury inventory in one soda industrial company, and alkali movement studies in two cement industrial companies. Korean industries expressed deep interest in leak detection in underground pipelines, abrasion/corrosion studies, mixing rate and residence time measurements. (Author)

  11. Simultaneous production of detergent stable keratinolytic protease, amylase and biosurfactant by Bacillus subtilis PF1 using agro industrial waste.

    Science.gov (United States)

    Bhange, Khushboo; Chaturvedi, Venkatesh; Bhatt, Renu

    2016-06-01

    The present study is an attempt to optimize simultaneous production of keratinolytic protease, amylase and biosurfactant from feather meal, potato peel and rape seed cake in a single media by response surface methodology to evaluate their biochemical properties for detergent additive. The optimization was carried out using 20 run, 3 factor and 5-level of central composite design on design expert software which resulted in a 1.2, 0.84 and 2.28 fold increase in protease, amylase and biosurfactant production. The proteolytic activity was found to be optimum at pH 9.0 and 60 °C while optimum amylolytic activity was recorded at pH 6.0 and 70 °C respectively. Both enzymes were found to be stable in the presence of organic solvents, ionic and commercial detergent and oxidizing agents. The biosurfactant was extracted with chloroform and was found to be stable at varying pH and temperature; however a reduction in the activity was observed at temperature higher than 70 °C. The isolated enzymes and biosurfactants may find applications in the effective removal of stains.

  12. The consistent differential expression of genetic pathways following exposure of an industrial Pseudomonas aeruginosa strain to preservatives and a laundry detergent formulation

    Science.gov (United States)

    Amézquita, Alejandro; Le Marc, Yvan; Bull, Matthew J; Connor, Thomas R; Mahenthiralingam, Eshwar

    2018-01-01

    Abstract Pseudomonas aeruginosa is a common contaminant associated with product recalls in the home and personal care industry. Preservation systems are used to prevent spoilage and protect consumers, but greater knowledge is needed of preservative resistance mechanisms used by P. aeruginosa contaminants. We aimed to identify genetic pathways associated with preservative exposure by using an industrial P. aeruginosa strain and implementing RNA-Seq to understand gene expression changes in response to industry relevant conditions. The consistent differential expression of five genetic pathways during exposure to multiple industrial growth conditions associated with benzisothiazolone (BIT) and phenoxyethanol (POE) preservatives, and a laundry detergent (LD) formulation, was observed. A MexPQ-OpmE Resistance Nodulation Division efflux pump system was commonly upregulated in response to POE, a combination of BIT and POE, and LD together with BIT. In response to all industry conditions, a putative sialic acid transporter and isoprenoid biosynthesis gnyRDBHAL operon demonstrated consistent upregulation. Two operons phnBA and pqsEDCBA involved in Pseudomonas quinolone signaling production and quorum-sensing were also consistently downregulated during exposure to all the industry conditions. The ability to identify consistently differentially expressed genetic pathways in P. aeruginosa can inform the development of future targeted preservation systems that maintain product safety and minimise resistance development. PMID:29548026

  13. Barrier function and natural moisturizing factor levels after cumulative exposure to a fruit-derived organic acid and a detergent: different outcomes in atopic and healthy skin and relevance for occupational contact dermatitis in the food industry

    NARCIS (Netherlands)

    Angelova-Fischer, Irena; Hoek, Anne-Karin; Dapic, Irena; Jakasa, Ivone; Kezic, Sanja; Fischer, Tobias W.; Zillikens, Detlef

    2015-01-01

    Fruit-derived organic compounds and detergents are relevant exposure factors for occupational contact dermatitis in the food industry. Although individuals with atopic dermatitis (AD) are at risk for development of occupational contact dermatitis, there have been no controlled studies on the effects

  14. Purification and characterization of a protease produced by Bacillus megaterium RRM2: application in detergent and dehairing industries.

    Science.gov (United States)

    Rajkumar, Renganathan; Jayappriyan, Kothilmozhian Ranishree; Rengasamy, Ramasamy

    2011-12-01

    An alkaline serine protease produced by Bacillus megaterium RRM2 isolated from the red alga, Kappaphycus alvarezii (Doty) Doty ex Silva was studied for the first time and the same analyzed for the production of protease in the present study. Identification of the bacterium was done on the basis of both biochemical analysis and by 16S rDNA sequence analysis. The extracellular protease obtained from B. megaterium RRM2 was purified by a three-step process involving ammonium sulphate precipitation, gel filtration (Sephadex G100) and Q-Sepharose column chromatography. The purity was found to be 30.6-fold with a specific activity of 3591.5 U/mg protein with a molecular weight of 27 kDa. The metal ions Ca(2+), Mg(2+), K(+) and Na(+) marginally enhanced the activity of the purified enzyme while Hg(2+), Cu(2+), Fe(2+), CO(2+) and Zn(2+), had reduced the activity. The enzyme was found to be active in the pH range of 9.0-10.0 and remained active up to 60 °C. Phenyl Methyl Sulfonyl Fluoride (PMSF) inhibited the enzyme activity, thus, confirming that this enzyme is an alkaline serine protease. Likewise, DTT also inhibited the enzyme thus confirming the disulfide nature of the enzyme. The enzyme exhibited a high degree of tolerance to Sodium Dodecyl Sulphate (SDS). The partially purified protease when used as an additive in the commercial detergents was found to be a suitable source for washing clothes especially those stained with blood. Further, it showed good dehairing activity within a short duration in goat skin without affecting its collagen component. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Advances in protease engineering for laundry detergents.

    Science.gov (United States)

    Vojcic, Ljubica; Pitzler, Christian; Körfer, Georgette; Jakob, Felix; Ronny Martinez; Maurer, Karl-Heinz; Schwaneberg, Ulrich

    2015-12-25

    Proteases are essential ingredients in modern laundry detergents. Over the past 30 years, subtilisin proteases employed in the laundry detergent industry have been engineered by directed evolution and rational design to tailor their properties towards industrial demands. This comprehensive review discusses recent success stories in subtilisin protease engineering. Advances in protease engineering for laundry detergents comprise simultaneous improvement of thermal resistance and activity at low temperatures, a rational strategy to modulate pH profiles, and a general hypothesis for how to increase promiscuous activity towards the production of peroxycarboxylic acids as mild bleaching agents. The three protease engineering campaigns presented provide in-depth analysis of protease properties and have identified principles that can be applied to improve or generate enzyme variants for industrial applications beyond laundry detergents. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. Detergent zeolite filtration plant

    OpenAIRE

    Stanković Mirjana S.; Pezo Lato L.

    2003-01-01

    The IGPC Engineering Department designed basic projects for detergent zeolite filtration plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects, a production plant with a capacity of 75,000 t/y was manufactured, at "Zeolite Mira", Mira (VE), Italy, in 1997, for increasing detergent zeolite production, from 50,000 to 100,000 t/y. The main goal was to increase the detergent zeoli...

  17. French parapetroleum industry: results of 1992 survey

    International Nuclear Information System (INIS)

    Valentin, E.; Trouve, O.

    1992-01-01

    The petroleum prospection and production industries have developed a parapetroleum sector that is considerable in size and has been going through profound changes over the past few years. Under the impetus of acquisitions and mergers, the supply has become heavily concentrated, and now reorganized around a growing demand for integrated services. Petroleum companies tend to farm out a growing portion of their business, and this sharing out of competence and sometimes of responsibilities is breeding new types of partnership arrangements between the petroleum and parapetroleum business. This paper gives the results of an survey led in 1991 on petroleum international economy and gives statistical informations on french parapetroleum industry (exploration-production investments, exploratory wells drilled, drilling equipment in action, offshore operations, turnover evolution, shortage of manpower). 14 figs., 5 tabs

  18. Survey of industrial noise in Port Elizabeth.

    Science.gov (United States)

    Lane, J L

    1976-02-07

    The amendment to the Factories, Machinery and Building Work Act of 1941 in regard to hearing conservation is outlined. A survey by the Port Elizabeth Deaf Association on workmen from Cadbury (Pty) Ltd was undertaken in 1973 and on a second group in 1974 and the results are published and discussed. Although the numbers of workmen were small, the results suggest that widespread testing will unearth many cases of unsuspected hearing loss. The implications as applied to industry at large are discussed and the difficulties in adequately assessing large numbers of workmen with adequately trained audiometric testers are stressed. A suggestion is made that mobile clinics under the control of Chambers of Industries would be the most efficient way of approaching the screening problem, and an estimated cost structure in the setting up of such a clinic is introduced.

  19. A Survey of Industrial Involvement in Open Source

    OpenAIRE

    Røsdal, Andreas

    2006-01-01

    This thesis presents the results of an explorative survey of industrial involvement in open source. The survey is performed in collaboration with participants from the European ITEA project, COSI (Co-development using inner & Open source in Software Intensive products). The survey was performed to explore aspects of industrial involvement in open source, as industrial management of open source project, industrial use of open source components, related development, and communication processes,...

  20. Characterization of the Protease Activity of Detergents: Laboratory Practicals for Studying the Protease Profile and Activity of Various Commercial Detergents

    Science.gov (United States)

    Valls, Cristina; Pujadas, Gerard; Garcia-Vallve, Santi; Mulero, Miquel

    2011-01-01

    Detergent enzymes account for about 30% of the total worldwide production of enzymes and are one of the largest and most successful applications of modern industrial biotechnology. Proteases can improve the wash performance of household, industrial, and institutional laundry detergents used to remove protein-based stains such as blood, grass, body…

  1. Barrier function and natural moisturizing factor levels after cumulative exposure to a fruit-derived organic acid and a detergent: different outcomes in atopic and healthy skin and relevance for occupational contact dermatitis in the food industry.

    Science.gov (United States)

    Angelova-Fischer, Irena; Hoek, Anne-Karin; Dapic, Irena; Jakasa, Ivone; Kezic, Sanja; Fischer, Tobias W; Zillikens, Detlef

    2015-12-01

    Fruit-derived organic compounds and detergents are relevant exposure factors for occupational contact dermatitis in the food industry. Although individuals with atopic dermatitis (AD) are at risk for development of occupational contact dermatitis, there have been no controlled studies on the effects of repeated exposure to multiple irritants, relevant for the food industry, in atopic skin. The aim of the study was to investigate the outcomes of repeated exposure to a fruit-derived organic acid and a detergent in AD compared to healthy volunteers. The volunteers were exposed to 2.0% acetic acid (AcA) and/or 0.5% sodium lauryl sulfate (SLS) in controlled tandem repeated irritation test. The outcomes were assessed by measurements of erythema, transepidermal water loss (TEWL) and natural moisturizing factor (NMF) levels. In the AD volunteers, repeated AcA exposure led to barrier disruption and significant TEWL increase; no significant differences after the same exposure in the healthy controls were found. Repeated exposure to SLS and the irritant tandems enhanced the reactions and resulted in a significantly higher increase in TEWL in the AD compared to the control group. Cumulative irritant exposure reduced the NMF levels in both groups. Differences in the severity of irritant-induced barrier impairment in atopic individuals contribute to the risk for occupational contact dermatitis in result of multiple exposures to food-derived irritants and detergents. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. Detergent-compatible proteases: microbial production, properties, and stain removal analysis.

    Science.gov (United States)

    Niyonzima, Francois Niyongabo; More, Sunil

    2015-01-01

    Proteases are one of the most important commercial enzymes used in various industrial domains such as detergent and leather industries. The alkaline proteases as well as other detergent-compatible enzymes such as lipases and amylases serve now as the key components in detergent formulations. They break down various stains during fabric washing. The search for detergent-compatible proteases with better properties is a continuous exercise. The current trend is to use detergent-compatible proteases that are stable over a wide temperature range. Although the proteases showing stability at elevated pH have the capacity to be used in detergent formulations, their usage can be significant if they are also stable and compatible with detergent and detergent ingredients, and also able to remove protein stains. Despite the existence of some reviews on alkaline proteases, there is no specification for the use of alkaline proteases as detergent additives. The present review describes the detergent-compatible proteases tested as detergent additives. An overview was provided for screening, optimization, purification, and properties of detergent compatible proteases, with an emphasis on the stability and compatibility of the alkaline proteases with the detergent and detergent compounds, as well as stain removal examination methods.

  3. A producer survey on Turkish furniture industry

    OpenAIRE

    Öğün, Emir Polat

    1996-01-01

    Ankara : The Department of Management and Graduate School of Business Administration of Bilkent Univ., 1996. Thesis (Master's) -- Bilkent University, 1996. Includes bibliographical references leaves 79-80. Turkish furniture industry has been growing steadily since the liberalization of Turkish economy in early 1980’s. However, the industry faces some technological and economical problems which affects the competitiveness of the firms in the global market. The major problems ...

  4. production and characterization of liquid detergents from some

    African Journals Online (AJOL)

    eobe

    small scale industries and even, some individuals have also embarked on ... reduce cost of alkali production since the cost for the manufacture of potassium ..... Properties and Enzyme Stability in Liquid Detergent. Journal of Surfactant ...

  5. Industrial hygiene survey. IMC, Agricultural Operation Division, Bartow, Florida

    International Nuclear Information System (INIS)

    Stephenson, F.; Cassady, M.

    1977-10-01

    An industrial hygiene survey was conducted at the Agricultural Operations Division, IMC, Bartow, Florida, on July 19-22, 1976, as part of the industry-wide study of the phosphate fertilizer industry. The phosphate ore mining operations, the plant, and the medical, safety, and industrial hygiene programs are described. The beneficiation plant was surveyed to determine the 8-hour time weighted averages of cadmium, chromium, vanadium, fluoride, arsenic, and silica. General area samples were taken for uranium and alpha-radiation. With the exception of uranium in the grinding area, all other elements analyzed came within the OSHA standards. However, several results exceed the NIOSH recommended standard

  6. Stability of Enzymes in Granular Enzyme Products for Laundry Detergents

    DEFF Research Database (Denmark)

    Biran, Suzan; Bach, Poul; Simonsen, Ole

    Enzymes have long been of interest to the detergent industry due to their ability to improve the cleaning efficiency of synthetic detergents, contribute to shortening washing times, and reduce energy and water consumption, provision of environmentally friendlier wash water effluents and fabric care....... However, incorporating enzymes in detergent formulations gives rise to numerous practical problems due to their incompatibility with and stability against various detergent components. In powdered detergent formulations, these issues can be partly overcome by physically isolating the enzymes in separate...... particles. However, enzymes may loose a significant part of their activity over a time period of several weeks. Possible causes of inactivation of enzymes in a granule may be related to the release of hydrogen peroxide from the bleaching chemicals in a moisture-containing atmosphere, humidity, autolysis...

  7. Improved detergent-based recovery of polyhydroxyalkanoates (PHAs).

    Science.gov (United States)

    Yang, Yung-Hun; Brigham, Christopher; Willis, Laura; Rha, ChoKyun; Sinskey, Anthony

    2011-05-01

    Extracting polyhydroxyalkanoate (PHA) polymer from bacterial cells often involves harsh conditions, including use of environmentally harmful solvents. We evaluated different detergents under various conditions to extract PHA from Ralstonia eutropha and Escherichia coli cells. Most detergents tested recovered highly pure PHA polymer from cells in amounts that depended on the percentage of polymer present in the cell. Detergents such as linear alkylbenzene sulfonic acid (LAS-99) produced a high yield of high purity polymer, and less detergent was needed compared to the amount of SDS to produce comparable yields. LAS-99 also has the advantage of being biodegradable and environmentally safe. Chemical extraction of PHA with detergents could potentially minimize or eliminate the need to use harsh organic solvents, thus making industrial PHA production a cleaner technology process. © Springer Science+Business Media B.V. 2011

  8. The South African wine industry: Insights survey 2013

    CSIR Research Space (South Africa)

    Blok, T

    2013-09-01

    Full Text Available PwC’s 2013 South African wine industry insights survey explores some of the issues facing local wine businesses, specifically those evident from the financial results of the 2012 harvest, human resource management practices in the industry and wine...

  9. The North Dakota Beef Industry Survey: Implications for Extension

    Science.gov (United States)

    Dahlen, Carl R.; Hadrich, Joleen C.; Lardy, Gregory P.

    2014-01-01

    A portion of the North Dakota Beef Industry Survey was developed to determine how educational programs can evolve to meet future needs of North Dakota beef producers. Of the 2,500 surveys mailed out to beef producers, 527 responses were completed and returned. Results highlight the level of education of North Dakota beef producers, anticipated use…

  10. Application of engineering surveying in engineering industry

    Directory of Open Access Journals (Sweden)

    Lucia Forgáčová

    2005-11-01

    Full Text Available This is a presentation of the application of surveying principles used in a process of building the electrolytic tinning line at the U.S.Steel s.r.o. Kosice. The work involved is setting up a new network of measuring points, as well as the effective implementation of suitable methodologies, instruments and measuring tools. All of these were focal points for the survey, required during the installation of machinery units for the new tinning line. The coil producing technology utilised on the line entails a high speed movement. In this context all methods and final measurements were adapted to a very high standard of precision in order to ensure a safe working environment and exclude the risk of malfunctions in the final production stage. The smallest variations in the positioning of machinery units, compared with technical drawings, could rise a danger of coil breakdown, line malfunction or personal injury.

  11. Wind energy in industrial areas. Results of an attitude survey

    International Nuclear Information System (INIS)

    Schoolderman, J.A.; Huiberts, R.G.J.

    2000-06-01

    The feasibility of installing wind turbines in industrial parks in the Netherlands has been investigated. An overview is given of possibilities and constraints to fit in wind turbines in industrial areas, based on the results of a literature study, a market consultation of sectoral organizations, representatives of local industrial circles and industrial experts in the field of renewable energy. Also a telephone survey was carried out among 130 entrepreneurs in the Netherlands to determine their attitudes towards the use of sustainable energy and wind energy in industrial parks. The results of the attitude study are published in this report. The main report is a separate report for which a separate abstract has been prepared. The intermediate results were discussed at a meeting (23 February 2000), in which representatives from the industry, provinces, municipalities and the government participated

  12. Hydro-Quebec's survey on outage cost in industries

    International Nuclear Information System (INIS)

    Naggar, R.

    1990-01-01

    In 1989 Hydro-Quebec completed a survey on the cost of power interruptions to its industrial customers. A total of 11,000 firms formed the base of the survey, which was reduced to 1,647 for analysis purposes. The questionnaire was designed around the concept of representation of knowledge. The costs of various situations were inferred for every enterprise on the basis of knowledge obtained through the surveys. The results of the survey describe the variation in costs of interruption as a function of time of occurrence, duration and advance notice. These costs are expressed in terms of a reference case by the equivalent hourly cost. The magnitude of the cost of the reference interruption is designated the reference cost of undelivered energy. This paper describes the methodology of the survey but does not include survey results. 4 refs., 2 tabs

  13. Polyphosphates substitution for zeolite to in detergents

    International Nuclear Information System (INIS)

    Restrepo V, Gloria M.; Ocampo G, Aquiles; Saldarriaga M, Carlos

    1996-01-01

    The detergents, as well as the cleaning products, contain active ingredients that are good to increase their efficiency and some of them, as the sodium Tripoli-phosphate (TPF), they have turned out to be noxious for the environment. The zeolites use in the formulation of detergents has grown substantially since they fulfill the same function of the TPF and they have been recommended ecologically as substitutes from these when not being polluting. The objective of this work is to obtain a zeolite with appropriate characteristics for its use in the formulation of detergents, reproducing those of the zeolites used industrially. The zeolite synthesis is studied 4A starting from hydro-gels of different composition, varying the operation conditions and using two raw materials: (sodium meta-silicate, commercial degree and metallic aluminum) and clay type kaolin like silica source and aluminum It is looked for to get a product of beveled cubic morphology, or spherical, with glass size between 1 and 3 microns and that it possesses good capacity of conical exchange. Since the capacity and speed of ionic exchange is influenced by the particle size, time of contact and temperature, experimentation conditions settle down to measure the exchange of ions calcium and magnesium in watery solutions that they simulate the real situation of a laundry process in the country. This way the ability of the zeolite 4A obtained to diminish the concentration of these ions in the laundry waters is evaluated and its possibilities like component in the formulation of detergents non-phosphatates. Of the synthesized zeolites, the best in agreement is chosen with chemical properties as ionic and physical exchange capacity as crystalline, particle size and color, to prepare a detergent in which the polyphosphates is substituted partial and totally for the synthesized zeolite

  14. Scientists Still Behaving Badly? A Survey Within Industry and Universities.

    Science.gov (United States)

    Godecharle, Simon; Fieuws, Steffen; Nemery, Ben; Dierickx, Kris

    2017-10-02

    Little is known about research misconduct within industry and how it compares to universities, even though a lot of biomedical research is performed by-or in collaboration with-commercial entities. Therefore, we sent an e-mail invitation to participate in an anonymous computer-based survey to all university researchers having received a biomedical research grant or scholarship from one of the two national academic research funders of Belgium between 2010 and 2014, and to researchers working in large biomedical companies or spin-offs in Belgium. The validated survey included questions about various types of research misconduct committed by respondents themselves and observed among their colleagues in the last three years. Prevalences of misconduct were compared between university and industry respondents using binary logistic regression models, with adjustments for relevant personal characteristics, and with significance being accepted for p industry. Response rates were 43 (767/1766) and 48% (123/255), and usable information was available for 617 and 100 respondents, respectively. In general, research misconduct was less likely to be reported by industry respondents compared to university respondents. Significant differences were apparent for one admitted action (gift authorship) and three observed actions (plagiarism, gift authorship, and circumventing animal-subjects research requirements), always with lower prevalences for industry compared to universities, except for plagiarism. This survey, based on anonymous self-report, shows that research misconduct occurs to a substantial degree among biomedical researchers from both industry and universities.

  15. Industrial hygiene survey. CF Chemicals, Inc., Bartow, Florida

    International Nuclear Information System (INIS)

    Stephenson, F.; Cassady, M.

    1977-10-01

    An industrial hygiene survey was conducted by NIOSH at CF Chemicals, Bartow, Florida on August 9-12, 1976 as part of a study of the phosphate industry. A description is given of the plant, and the medical, safety, and industrial hygiene programs. During the study, 8-hour time weighted averages were determined for exposure to arsenic, cadmium, chromium, vanadium, phosphoric acid, and sulfuric acid for workers involved in cleaning out phosphoric acid reactor vessels. General area samples were collected for fluorides, radon, and uranium. The results came within the OSHA standards except for two fluoride samples

  16. Industrial hygiene survey. IMC, Phosphate Chemical Complex, New Wales, Florida

    International Nuclear Information System (INIS)

    Stephenson, F.; Cassady, M.

    1977-10-01

    An industrial hygiene survey was conducted by NIOSH at IMC Phosphate Chemical Complex, New Wales, Florida, on June 7-11, 1976, as part of a study of the phosphate industry. Phosphate fertilizer manufacturing, the plant, and the medical, safety, and industrial hygiene programs are described. During the study 8-hour time weighted averages were determined for exposure to arsenic, cadmium, chromium, vanadium, phosphoric acid, and sulfuric acid for workers involved in cleaning out phosphoric acid reactor vessels. General area samples were collected for fluorides, radon, and uranium. Several samples were above the NIOSH recommended levels for arsenic and chromium

  17. Survey of employment in the UK wind energy industry

    International Nuclear Information System (INIS)

    Jenkins, G.

    1997-01-01

    A survey of employment in the UK wind energy industry has been carried out. It related to the financial years 1993-4 and 1994-5. A questionnaire was sent to all organisations working in wind energy in the UK. Some 249 replies were received. The paper reports on the findings regarding overall employment in the industry, employment in the major sectors of the industry, jobs by type of organisation, the major employers, the location of jobs, and the overall impact on employment in the UK economy. (Author)

  18. Detergent Disposal into Our Environmentand Its Impact on Marine Microbes

    Science.gov (United States)

    Effendi, I.; Nedi, S.; Ellizal; Nursyirwani; Feliatra; Fikar; Tanjung; Pakpahan, R.; Pratama

    2017-12-01

    Detergents figure in an extensive array of industrial and home cleaning applications, released into the flow of wastewater coming from the home, can far-reaching environmental impacts. Microorganisms are crucial to nutrient recycling in ecosystems as they act as decomposers, pathogen, antibiotic producer, biodegradation of pollutants etc. The research is aimed to examine effect detergent disposal to bacterial population growth in marine environment both in vitro and in situ condition. Seawater samples were collected from Sungai Kayu Ara Village, and Dumai River estuary, Siak Regency and Dumai City, Riau Province. Experimental method with complete randomized design (RAL) 2 (two) factors; a detergent brand (a1: ATTACK, a2; RINSO and a3; SURF) and b concentration of detergent concentration with 5 (five) concentration level, b1 (0%) as control, b2 (0.3%), b3 (0.6%), b4 (0.9%) and b5 (1.2%) wass applied. The study showed that there was an effect of detergent addition, periode of exposure, and doses to the growth of bacterial population both in vitro and in situ conditions. The higher levels of detergent in the water column and the longer contamination duration, causing more and more depressed bacterial populations. It is suggested to run a further research on identification, and growth optimatioan of the species capable of degrading detergent.

  19. Survey of Damage Investigation of Babbitted Industrial Bearings

    Directory of Open Access Journals (Sweden)

    Lyle A. Branagan

    2015-04-01

    Full Text Available This survey collects the efforts to understand the sources and consequences of damage to babbitted industrial bearings, which operate by means of a hydrodynamic, or hydrostatic, film. Major individual damage types are discussed in the context of major damage categories.

  20. Report on Survey of Industry Needs for Quality. Summary Report.

    Science.gov (United States)

    Neylon, Kevin; And Others

    The TAFE (Technical and Further Education) National Centre for Research and Development conducted a survey to determine industry needs for quality training in Australia. Interviews were conducted with managers in manufacturing and tourism/hospitality companies throughout Australia, especially with firms with a high reputation. Interview forms were…

  1. Energy survey in the New Zealand dairy industry

    Energy Technology Data Exchange (ETDEWEB)

    Vickers, V T; Shannon, D V

    1977-12-25

    An in-depth report on energy consumption in the New Zealand dairy industry for 1974--75 shows that a reduction in fuel consumption per unit of production has occurred when compared with two previous surveys (1954--55 and 1964--65). The increase in thermal efficiency of dairy processing was due mainly to the use of hot water heating systems in milk-treatment stations, the increased capacity of butter and cheese factories, increased thermal efficiency in skim milk drying and casein manufacture, increased efficiency in boiler plants, and higher drying air temperature achieved with the use of indirect oil- and gas-fired air heaters and liquid-phase air heating systems. Total energy consumed by the industry by type is tabulated. Recommendations to the industry following the survey are listed. (MCW)

  2. Formal methods for industrial critical systems a survey of applications

    CERN Document Server

    Margaria-Steffen, Tiziana

    2012-01-01

    "Today, formal methods are widely recognized as an essential step in the design process of industrial safety-critical systems. In its more general definition, the term formal methods encompasses all notations having a precise mathematical semantics, together with their associated analysis methods, that allow description and reasoning about the behavior of a system in a formal manner.Growing out of more than a decade of award-winning collaborative work within the European Research Consortium for Informatics and Mathematics, Formal Methods for Industrial Critical Systems: A Survey of Applications presents a number of mainstream formal methods currently used for designing industrial critical systems, with a focus on model checking. The purpose of the book is threefold: to reduce the effort required to learn formal methods, which has been a major drawback for their industrial dissemination; to help designers to adopt the formal methods which are most appropriate for their systems; and to offer a panel of state-of...

  3. Comparison of Satellite Surveying to Traditional Surveying Methods for the Resources Industry

    Science.gov (United States)

    Osborne, B. P.; Osborne, V. J.; Kruger, M. L.

    Modern ground-based survey methods involve detailed survey, which provides three-space co-ordinates for surveyed points, to a high level of accuracy. The instruments are operated by surveyors, who process the raw results to create survey location maps for the subject of the survey. Such surveys are conducted for a location or region and referenced to the earth global co- ordinate system with global positioning system (GPS) positioning. Due to this referencing the survey is only as accurate as the GPS reference system. Satellite survey remote sensing utilise satellite imagery which have been processed using commercial geographic information system software. Three-space co-ordinate maps are generated, with an accuracy determined by the datum position accuracy and optical resolution of the satellite platform.This paper presents a case study, which compares topographic surveying undertaken by traditional survey methods with satellite surveying, for the same location. The purpose of this study is to assess the viability of satellite remote sensing for surveying in the resources industry. The case study involves a topographic survey of a dune field for a prospective mining project area in Pakistan. This site has been surveyed using modern surveying techniques and the results are compared to a satellite survey performed on the same area.Analysis of the results from traditional survey and from the satellite survey involved a comparison of the derived spatial co- ordinates from each method. In addition, comparisons have been made of costs and turnaround time for both methods.The results of this application of remote sensing is of particular interest for survey in areas with remote and extreme environments, weather extremes, political unrest, poor travel links, which are commonly associated with mining projects. Such areas frequently suffer language barriers, poor onsite technical support and resources.

  4. JAIF's 23rd nuclear industry survey: strengthening industrial foundations under low economic growth

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    Each year since the beginning of nuclear development in Japan, Japan Atomic Industrial Forum has conducted the survey of the nuclear-related aspects in mining and manufacturing industries, electric utilities, trading firms, etc., regarding their expenditures, sales and personnel. The results of the 23rd survey for fiscal 1981 (April, 1981, to March, 1982,) are described. The salient points in the year, as compared with fiscal 1980, are as follows: (trend in expenditures) nuclear-related expenditures exceeded yen2 trillion, up 12 %; the operation and maintenance costs of electric utilities varied, but overall, up 25 %; the nuclear-related expenditures of mining and manufacturing industries were up 34 %; (trend in sales) the new record in mining and manufacturing industries - the sales topped yen1 trillion; the sales of reactor equipments rose by 59 %; the sales by mining and manufacturing industries to electric utilities up 42 %; the nuclear-related exports of mining and manufacturing industries grew by 13 %; the revenues and sales exceeded the expenditures in mining and manufacturing industries. (Mori, K.)

  5. Cellulase production by thermophilic Bacillus sp. SMIA-2 and its detergent compatibility

    Directory of Open Access Journals (Sweden)

    Silvania A. Ladeira

    2015-03-01

    Conclusions: The properties presented by Bacillus sp. SMIA-2 suggest that this organism might become a potential source of lignocellulose-degrading enzymes for industrial applications such as in the detergent industry.

  6. Survey of industry methods for producing highly reliable software

    International Nuclear Information System (INIS)

    Lawrence, J.D.; Persons, W.L.

    1994-11-01

    The Nuclear Reactor Regulation Office of the US Nuclear Regulatory Commission is charged with assessing the safety of new instrument and control designs for nuclear power plants which may use computer-based reactor protection systems. Lawrence Livermore National Laboratory has evaluated the latest techniques in software reliability for measurement, estimation, error detection, and prediction that can be used during the software life cycle as a means of risk assessment for reactor protection systems. One aspect of this task has been a survey of the software industry to collect information to help identify the design factors used to improve the reliability and safety of software. The intent was to discover what practices really work in industry and what design factors are used by industry to achieve highly reliable software. The results of the survey are documented in this report. Three companies participated in the survey: Computer Sciences Corporation, International Business Machines (Federal Systems Company), and TRW. Discussions were also held with NASA Software Engineering Lab/University of Maryland/CSC, and the AIAA Software Reliability Project

  7. A survey of health care benefits in the apparel industry.

    Science.gov (United States)

    Moore, W B

    1985-09-01

    Each day as Americans prepare to begin their days, many put on their clothing often without a thought as to how or where it was manufactured. The manufacture of clothing in the United States is a labor intensive industry pressed by competition in foreign countries where labor is abundant and less expensive; therefore, the manufacturers must look for every opportunity to reduce their costs. The survey presented here reviews the health benefit plans in the apparel industry and current initiatives for cost reduction. The results are interesting, for they give the hospital administrator vital information on the types of programs that might be in place in local manufacturers and the method of cost containment expected in this industry.

  8. A survey of economic indices of plastic wastes recycling industry

    Directory of Open Access Journals (Sweden)

    Malek Hassanpour

    2015-11-01

    Full Text Available Numerous small recycling units of plastic wastes have been currently constructed heedless to study of economic indices in Iran. Pay attention to the prominent performance of the industrial sector for economic development and its priority for fortifying other sectors to implement job opportunities, survey of the economic indices beckon the stakeholders and industries owners. The main objective of this study was a survey of economic indices in small recycling unit of plastic wastes. Therefore, the practice of computing the economic indices was performed using empirical equations, professional experiences and observations in site of the industry in terms of sustainability performance. Current study had shown the indices values such as value-added percent, profit, annual income, breakeven point, value-added, output value, data value, variable cost of good unit and production costs were found 62%, $ 366558, $ 364292.6, $ 100.34, $ 423451.25, $ 255335.75, $ 678787, $ 389.65 and $ 314494.4 respectively. The breakeven point about 15.93%, the time of return on investment about 1.12 (13.7 months were represented that this industry slightly needs long time to afford the employed capital and starts making a profit.

  9. Survey of industrial coal conversion equipment capabilities: valves

    Energy Technology Data Exchange (ETDEWEB)

    Bush, W. A.; Slade, E. C.

    1978-06-01

    A survey of the industrial capabilities of the valve and valve-actuator industry to supply large, high-pressure stop valves for the future coal conversion industry is presented in this report. Also discussed are development and testing capabilities of valve and valve-actuator manufacturers and anticipated lead times required to manufacture advanced design valves for the most stringent service applications. Results indicate that the valve and valve-actuator industry is capable of manufacturing in quantity equipment of the size and for the pressure and temperature ranges which would be required in the coal conversion industry. Valve manufacturers do not, however, have sufficient product application experience to predict the continuing functional ability of valves used for lock-hopper feeders, slurry feeders, and slag-char letdown service. Developmental and testing efforts to modify existing valve designs or to develop new valve concepts for these applications were estimated to range from 1 to 6 years. A testing facility to simulate actuation of critical valves under service conditions would be beneficial.

  10. Proteolytic Enzymes in Detergents: Evidence of Their Presence through Activity Measurements Based on Electrophoresis

    Science.gov (United States)

    Saperas, Nuria; Fonfria-Subiros, Elsa

    2011-01-01

    This laboratory exercise uses a problem-based approach to expose students to some basic concepts relating to proteins and enzymes. One of the main applications of enzymes at the industrial level is their use in the detergent market. The students examine a detergent sample to ascertain whether proteolytic enzymes are a component and, if so, which…

  11. 77 FR 37704 - Agency Information Collection Activities: Comment Request for the Industrial Minerals Surveys (40...

    Science.gov (United States)

    2012-06-22

    ... Activities: Comment Request for the Industrial Minerals Surveys (40 Forms) AGENCY: U.S. Geological Survey... the revision of the currently approved paperwork requirements for the Industrial Minerals Surveys... industrial mineral commodities, some of which are considered strategic and critical. This information will be...

  12. Bio-Detergent oil derivative used frying

    Directory of Open Access Journals (Sweden)

    Alfonso Jesús Torres Ortega

    2011-04-01

    Full Text Available Currently, the global trend towards sustainable development for environmental friendly products such as biosurfactants shows an excellent performance. Anionic surface active agents can be produced from renewable natural raw materials such as vegetable oils mainly derived from palm oil. Methyl ester sulfonate is an active component of highly biodegradable detergents, one advantage compared with detergents derived from petrochemicals which generate a high pollutant load. This paper proposes the study of sulfonation with sulfur trioxide of esters derived from waste cooking oil which main component is palm oil. The falling film reactor allows determining the conditions of the process at pilot scale. The experimentation allowed an enhancement of empirical equations in the equipment implemented for this purpose and to determine some physicochemical properties. The comparison obtained for this same process with petrochemicals compounds indicates that the model could be applied to any film sulfonation but adjusting the parameters and specific conditions, such as the physicochemical properties of the compounds used, since the sulfonation process described in this work is one of the more complicated cases. The technological development presented here seeks to contribute with the industrial needs to promote green chemical industry for the production of biosurfactant from waste frying oil.

  13. Detergent zeolite complex "Alusil", Zvornik

    OpenAIRE

    Stanković Mirjana S.; Pezo Lato L.

    2003-01-01

    The IGPC Engineering Department designed the basis technological and machine projects for a detergent zeolite complex, on the basis of which a pilot plant with an initial capacity of 5,000 t/y was constructed in 1983 within Birač-Zvornik production complex. Additional projects were done afterwards and the starting capacity increased to 200,000 t/y in 1988. This plant became the biggest producer of detergent zeolite in the world. These projects were manufactured on the basis of specific techno...

  14. A health and safety survey of Irish funeral industry workers.

    LENUS (Irish Health Repository)

    Kelly, N

    2012-02-01

    BACKGROUND: Those handling deceased individuals, including the funeral industry, face a variety of health and safety hazards including occupationally acquired infectious disease. AIMS: To identify the knowledge, attitudes and beliefs of Irish funeral industry workers towards occupational hazards and infectious disease in 2009. METHODS: The sample analysed consisted of all listed member premises of the Irish Association of Funeral Directors as at 1 July 2009. A postal survey was sent to each premises in July 2009, with two rounds of follow-up reviews sent to non-responders. Four main areas were covered--occupational hazards, embalming, industry expertise and demographics. The quantitative and qualitative results were analysed to assess knowledge, attitudes and beliefs. Data collection was completed on 31 December 2009. RESULTS: Two hundred and thirty listed member premises were contacted. Twenty-two were unsuitable for the survey. One hundred and thirty-eight valid replies were received from 130 premises, representing a premises response rate of 63% (130\\/208). Seventy-three premises (56%) identified themselves as embalmers. Embalmers had variable vaccine uptake and variable knowledge, attitude and beliefs towards embalming those with blood-borne viruses. Fifteen per cent of respondents reported a work-related injury, back injury being the most common. Splash and sharps injuries were reported as a work-related injury, and infections believed to be work related were also reported. CONCLUSIONS: This study demonstrates widespread occupational health concerns among this professional group. It confirms the need for occupational health advice and services. There is also a strong desire for regulation of this profession in Ireland.

  15. Relationships between academic institutions and industry in the life sciences--an industry survey.

    Science.gov (United States)

    Blumenthal, D; Causino, N; Campbell, E; Louis, K S

    1996-02-08

    Despite growing acceptance of relationships between academia and industry in the life sciences, systematic, up-to-date information about their extent and the consequences for the parties involved remains scarce. We attempted to collect information about the prevalence, magnitude, commercial benefits, and potential risks of such relationships by surveying a representative sample of life-science companies in the United States to determine their relationships with academic institutions. We collected data by telephone from May through September 1994 from senior executives of 210 life-science companies (of 306 companies surveyed; response rate, 69 percent). The sample contained all Fortune 500 companies in the fields of agriculture, chemicals, and pharmaceuticals; all international pharmaceutical companies with sales volumes similar to those of the Fortune 500 companies; and a random sample of non-Fortune 500 companies in the life sciences drawn from multiple commercial and noncommercial directories. Both the survey instrument and the survey methods resembled those of our 1984 study of 106 biotechnology companies, allowing us to assess the evolution of relationships between academia and industry over the past decade. Ninety percent of companies conducting life-science research in the United States had relationships involving the life sciences with an academic institution in 1994. Fifty-nine percent supported research in such institutions, providing an estimated $1.5 billion, or approximately 11.7 percent of all research-and-development funding received that year. The agreements with universities tended to be short-term and to involve small amounts, implying that most such relationships supported applied research or development. Over 60 percent of companies providing support for life-science research in universities had received patents, products, and sales as a result of those relationships. At the same time, the companies reported that their relationships with

  16. ENERGY AND EXERGY ANALYSIS OF A POWDER DETERGENT UNIT

    International Nuclear Information System (INIS)

    G. Bektas; F. Balkan

    2008-01-01

    In the recent years, there is a growing interest on minimization of energy utilization in various plants and thereby improving the performance. As an efficient tool for examining the processes, the exergy analysis gains importance. In the present work, the application of exergy analysis to powder detergent unit of a powder detergent production plant located at Izmir, Turkey were performed y using actual plant operational data. Also the energy analyses were considered for comparison. Although there are a number of energy and exergy analyses in various areas of industry, this study will be likely the first one for powder detergent production. The energy and exergy efficiencies of the equipments were calculated and it was concluded that according to the overall balance around the unit, the energy efficiency was 0.76 and the exergy efficiency was 0.40

  17. ENERGY AND EXERGY ANALYSIS OF A POWDER DETERGENT UNIT

    Energy Technology Data Exchange (ETDEWEB)

    G. Bektas; F. Balkan [Ege University, Chemical Engineering Department, Izmir (Turkey)

    2008-09-30

    In the recent years, there is a growing interest on minimization of energy utilization in various plants and thereby improving the performance. As an efficient tool for examining the processes, the exergy analysis gains importance. In the present work, the application of exergy analysis to powder detergent unit of a powder detergent production plant located at Izmir, Turkey were performed y using actual plant operational data. Also the energy analyses were considered for comparison. Although there are a number of energy and exergy analyses in various areas of industry, this study will be likely the first one for powder detergent production. The energy and exergy efficiencies of the equipments were calculated and it was concluded that according to the overall balance around the unit, the energy efficiency was 0.76 and the exergy efficiency was 0.40.

  18. 3-D SURVEY APPLIED TO INDUSTRIAL ARCHAEOLOGY BY TLS METHODOLOGY

    Directory of Open Access Journals (Sweden)

    M. Monego

    2017-05-01

    Full Text Available This work describes the three-dimensional survey of “Ex Stazione Frigorifera Specializzata”: initially used for agricultural storage, during the years it was allocated to different uses until the complete neglect. The historical relevance and the architectural heritage that this building represents has brought the start of a recent renovation project and functional restoration. In this regard it was necessary a global 3-D survey that was based on the application and integration of different geomatic methodologies (mainly terrestrial laser scanner, classical topography, and GNSS. The acquisitions of point clouds was performed using different laser scanners: with time of flight (TOF and phase shift technologies for the distance measurements. The topographic reference network, needed for scans alignment in the same system, was measured with a total station. For the complete survey of the building, 122 scans were acquired and 346 targets were measured from 79 vertices of the reference network. Moreover, 3 vertices were measured with GNSS methodology in order to georeference the network. For the detail survey of machine room were executed 14 scans with 23 targets. The 3-D global model of the building have less than one centimeter of error in the alignment (for the machine room the error in alignment is not greater than 6 mm and was used to extract products such as longitudinal and transversal sections, plans, architectural perspectives, virtual scans. A complete spatial knowledge of the building is obtained from the processed data, providing basic information for restoration project, structural analysis, industrial and architectural heritage valorization.

  19. Survey of photovoltaic industry and policy in Germany and China

    International Nuclear Information System (INIS)

    Grau, Thilo; Huo, Molin; Neuhoff, Karsten

    2012-01-01

    Photovoltaic (PV) technologies have demonstrated significant price reductions, but large-scale global application of PV requires further technology improvements and cost reductions along the value chain. We survey policies in Germany and China and the industrial actors they can encourage to pursue innovation, including deployment support, investment support for manufacturing plants and R and D support measures. While deployment support has been successful, investment support for manufacturing in these nations has not been sufficiently tied to innovation incentives, and R and D support has been comparatively weak. The paper concludes with a discussion of the opportunities for global policy coordination. - Highlights: ► Describes policies applied to support PV technology and characterizes the technical potential and industry structure in Germany and China. ► Identifies opportunities to enhance innovation incentives—to contribute to 50% further cost reductions required for large scale application. ► Discusses synergies of technology policy in both countries by identifying and pursuing shared environmental and technology objectives.

  20. Energy conservation by hyperfiltration: food industry background literature survey

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-15

    The application of hyperfiltration to selected food product streams and food processing wastewaters for energy conservation was examined. This literature survey had led to the following conclusions: no research has been conducted in the food industry using membranes with hot process streams due to the temperature limitation (< 40/sup 0/C) of the typically studied cellulose acetate membranes; based on the bench-scale research reviewed, concentration of fruit and vegetable juices with membranes appears to be technically feasible; pretreatment and product recovery research was conducted with membranes on citrus peel oil, potato processing and brine wastewaters and wheys. The experiments demonstrated that these applications are feasible; many of the problems that have been identified with membranes are associated with either the suspended solids or the high osmotic pressure and viscosity of many foods; research using dynamic membranes has been conducted with various effluents, at temperatures to approx. 100/sup 0/C, at pressures to 1200 psi and with suspended solids to approx. 2%; and, the dynamic membrane is being prototype tested by NASA for high temperature processing of shower water. The literature review substantiates potential for dynamic membrane on porous stainless tubes to process a number of hot process and effluent streams in the food processing industry. Hot water for recycle and product concentrations are major areas with potential for economic application. The two plants involved in the first phase of the project should be reviewed to identify potential energy conservation applications. As many as possible of the conservation applications should be tested during the screening phase at each site. The most promising applications at each site should be evaluated more intensively to establish engineering estimates of the economics of this technology for the canned fruit and vegetable segment of the food industry.

  1. 77 FR 6580 - Agency Information Collection Activities: Comment Request for the Industrial Minerals Surveys (40...

    Science.gov (United States)

    2012-02-08

    ... Collection Activities: Comment Request for the Industrial Minerals Surveys (40 Forms) AGENCY: U.S. Geological... forms to supply the USGS with domestic production and consumption data of industrial mineral commodities... Minerals Yearbook, monthly Mineral Industry Surveys, annual Mineral Commodity Summaries, and special...

  2. Regional elevator survey : grain transportation & industry trends for Great Plains elevators

    Science.gov (United States)

    2001-08-01

    One potential means for gaining insight into the current state of the elevator industry, : and into expectations for future trends, is through a survey. The objective of this study is to profile the transportation and industry characteristics of the ...

  3. Energy and Water Consumption End-Use Survey in Commercial and Industrial Sectors in Georgia

    Data.gov (United States)

    US Agency for International Development — The objective of survey was to collect statistical energy and water end-use data for commercial and industrial sectors. The survey identified volumes of energy and...

  4. Employee Satisfaction Survey on the Life Insurance Industry

    Directory of Open Access Journals (Sweden)

    Benţe Corneliu Cristian

    2014-08-01

    Full Text Available This paper has proposed to explore the satisfaction of employees that sell insurance policies. Several authors had examined customer satisfaction, service quality and its implications on customer attitude towards different fields, but our concern was to address this relatively unexplored field which is employees` satisfaction. By using an exploratory approach, we collected data from a sample of 332 employees that sell insurance policies within north-Western Romanian. By analyzing data it was possible to determine the GAP between the expectations of employees that sell insurance policies and their perceptions regarding the service quality in life insurance industry. In addition it was tested whether there is relationship between the frequency of contact with the back office employees and level of income earned from this activity. It was revealed that from the analyzed population the most of those surveyed were employees of insurance intermediaries and not employees of a single company insurance. Considering that the number of researches that analyze the front office employees` satisfaction is rather low we consider that this paper brings a significant contribution to the literature review.

  5. Energy intensive industry for Alaska. Volume I: Alaskan cost factors; market factors; survey of energy-intensive industries

    Energy Technology Data Exchange (ETDEWEB)

    Swift, W.H.; Clement, M.; Baker, E.G.; Elliot, D.C.; Jacobsen, J.J.; Powers, T.B.; Rohrmann, C.A.; Schiefelbein, G.L.

    1978-09-01

    The Alaskan and product market factors influencing industry locations in the state are discussed and a survey of the most energy intensive industries was made. Factors external to Alaska that would influence development and the cost of energy and labor in Alaska are analyzed. Industries that are likely to be drawn to Alaska because of its energy resources are analyzed in terms of: the cost of using Alaska energy resources in Alaska as opposed to the Lower 48; skill-adjusted wage and salary differentials between relevant Alaskan areas and the Lower 48; and basic plant and equipment and other operating cost differentials between relevant Alaskan areas and the Lower 48. Screening and evaluation of the aluminum metal industry, cement industry, chlor-alkali industry, lime industry, production of methanol from coal, petroleum refining, and production of petrochemicals and agrichemicals from North Slope natural gas for development are made.

  6. Semiconductor industry: a survey of structure, conduct, and performance

    International Nuclear Information System (INIS)

    Webbink, D.W.

    1977-01-01

    The study describes the structure, conduct, and performance of the semiconductor industry. The industry is characterized by a high rate of innovation and technological change, rapidly falling costs and prices, and rapidly rising sales in boom periods as well as large declines in sales in recession periods. These desirable performance characteristics take place in an industry that has moderately high domestic levels of concentration. However, there are many features that cause this industry to have behavior and performance that is markedly different from such highly concentrated industries as automobiles and steel. These features were investigated and are reported

  7. Protein engineering of subtilisins to improve stability in detergent formulations.

    Science.gov (United States)

    von der Osten, C; Branner, S; Hastrup, S; Hedegaard, L; Rasmussen, M D; Bisgård-Frantzen, H; Carlsen, S; Mikkelsen, J M

    1993-03-01

    Microbial proteases are used extensively in a large number of industrial processes and most importantly in detergent formulations facilitating the removal of proteinaceous stains. Site-directed mutagenesis has been employed in the construction of subtilisin variants with improved storage and oxidation stabilities. It is shown that in spite of significant structural homology between subtilisins subjected to protein engineering the effects of specific mutations can be quite different. Mutations that stabilize one subtilisin may destabilize another.

  8. Optimisation of saponin extraction conditions with Camellia sinensis var. assamica seed and its application for a natural detergent.

    Science.gov (United States)

    Gong, Wanying; Huang, Yewei; Ji, Aibing; Peng, Wenshu; Liu, Cong; Zeng, Yin; Yang, Ruijuan; Yan, Liang; Wang, Xuanjun; Sheng, Jun

    2018-04-01

    Camellia sinensis var. assamica seed cake (a by-product of tea-seed oil) is an abundant resource with poor utilisation. C. sinensis var. assamica seed saponin (CSS) is one kind of non-ionic surfactant. In this study, the CSS extraction conditions were optimised by response surface methodology (RSM) and then the CSS detergent was developed. Additionally, the safety and decontamination ability of the developed detergent were evaluated. The optimised extraction conditions were including the extracting temperature of 40.04 °C, extraction time of 4.97 h, ethanol concentration of 64.11% and liquid-solid ratio of 14.57:1 mL g -1 . The formula of the CSS detergent was as follows: 20% crude CSS, 0.3% oxidised tea polyphenols (OTPs), 0.2% nisin, 0.3% sodium dehydroacetate, 0.7% sodium alginate and 0.5% sodium polyacrylate. The LD 50 of the CSS detergent exceeds 14 g kg -1 in mice, indicating the detergent was non-toxic. Both of the emulsifying and the pesticide residues removal abilities of the CSS detergent were significantly stronger than the commercial detergent. A natural tea seed saponin detergent with good safety and decontamination ability was successfully developed. This can make better use of the tea seed cake, thereby creating added value in the tea seed oil industry. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  9. National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

    Science.gov (United States)

    Heidari, Farzin

    The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

  10. A survey of the video game industry in Portugal

    NARCIS (Netherlands)

    Santos, Pedro A.; Romeiro, Patrícia; Nunes, Flávio; Hollins, Paul; Riestra, Ruben

    2018-01-01

    Despite the impressive growth of the video game industry in Europe and a growing interest emerging in that industrial sector, there is still a knowledge deficiency in respect of its characteristics, and its contribution to urban and regional development. This paper explores the characteristics of

  11. Survey on the Finnsh biotechnology industry: Background and descriptive statistics

    OpenAIRE

    Hermans, Raine; Kulvik, Martti; Tahvanainen, Antti-Jussi

    2005-01-01

    ETLA, the Research Institute of the Finnish Economy, conducted surveys at the end of 2004 and at the beginning of 2002 on the enterprises listed in the Index of Biotechnology Companies in the Finnish Bioindustries organization. The surveys provide data on financial accounting, R&D activities, intellectual property rights, and sales forecasts. In addition to the updates, the ETLA 2004 Survey also provides detailed linkages to product-level information that incorporates R&D- and sales figures, ...

  12. FEED BACK ON STUDENTS INDUSTRIAL TRAINING FOR ENHANCING ENGINEERING EDUCATION QUALITY: A SURVEY BASED ANALYSIS

    OpenAIRE

    V. K. BANSAL,; SANDEEP GROVER; ASHOK KUMAR

    2010-01-01

    Indian industrial sector is passing through highly competitive phase due to globalization. Cut throat competition is predominant and quality is one of the decisive factors for sustainability. The role of industrial training in the engineering curricula of different universities is unarguable. Industrial training which is pre-existing in every technical institute is being reassessed through survey based questionnaires. The industrial feed back provides information’s on effective duration and a...

  13. Detergent-Mediated Reconstitution of Membrane Proteins

    NARCIS (Netherlands)

    Knol, J; Sjollema, K.A; Poolman, B.

    1998-01-01

    The efficiency of reconstitution of the lactose transport protein (LacS) of Streptococcus thermophilus is markedly higher with Triton X-100 than with other detergents commonly employed to mediate the membrane insertion. To rationalize these differences, the lipid/detergent structures that are formed

  14. Investment in the Community coal mining and iron and steel industries - 1981 survey

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The report has been prepared on the results of the 1981 survey of investments in the Community coal and steel industries. The survey which is conducted annually collects information on actual and forecast capital expenditure and production potential of coal and steel enterprises. The introductory chapter summarizes the results of the survey and the conclusions on them. Subsequent chapters examine in detail the results of the survey for each producing sector, namely: the coal mining industry; coking plants; briquetting plants; iron ore mines; and iron and steel industry. The annex contains a statement of the definitions under which the survey was carried out, together with tables giving a complete analysis of the results of the survey, including tables of capital expenditure and production potential by region and by category of plant for all sectors and categories of coal and steel products falling within the ECSC treaty. Editions are available in the seven community languages.

  15. Investment in the Community coal mining and iron and steel industries - 1980 survey

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The report has been prepared on the results of the 1980 survey of investments in the Community coal and steel industries. The survey, which is conducted annually, collects information on actual and forecast capital expenditure and production potential of coal and steel enterprises. The introductory chapter summarizes the results of the survey and the conclusions on them. Subsequent chapters of the report examine in detail the results of the survey for each producing sector, namely: the coal mining industry; coking plants; briquetting plants; iron-ore mines; and the iron and steel industry. The annex to the report contains a statement of the definitions under which the survey was carried out, together with tables giving a complete analysis of the results of the survey, including tables of capital expenditure and production potential by region and by category of plant for all sectors and categories of coal and steel products falling within the ECSC Treaty. Editions are available in six community languages.

  16. Survey on alternative energy for industrial processes in Indonesia

    International Nuclear Information System (INIS)

    Masduki, B.; Sukarsono, R.; Wardaya; Suryawan, I.

    1997-01-01

    In consequence of the national industrial development, it is necessary to supply a lot of energy. This paper presented a discussion about the option of supplying nuclear processed heat as alternative energy sources for industry especially in Java island. The electrical energy requirement can be estimated rising. The stock and the requirement of energy in Indonesia is unbalance. If the oil production rate is constant, such as that of today, it can be estimated that the oil stock would be over in 20 years. The country is trying to difertify its source of energy and reduce its dependence on oil. High Temperature Reactor (HTR) produces electric and also heat at various temperature in the form of steam and gas. Heat processes from a high temperature reactor, could be used in industry for supplying heat for coal hidroforming, gasification of coal, metal annealing, petrochemical hydrogenation, distillation, purification of petrochemicals, evaporation, water heat, etc. (author). 8 refs, 1 fig., 5 tabs

  17. LCA Experiences in Danish Industry: Results of a Survey

    DEFF Research Database (Denmark)

    Broberg, Ole; Christensen, Per

    1999-01-01

    A study on Danish industry's experiences with LCA has been performed. Twenty-six enterprises from different sectors filled in a questionnaire. The enterprises are still in an adoption and learning phase and experiences with full-blown LCA's are sparse. Expectations of future market pressure...

  18. Production of Detergent from Castor Oil

    OpenAIRE

    Abubakar Garba ISAH

    2006-01-01

    This research work was carried out with the objective of extraction of oil from castor seeds and its utilization to produce a synthetic detergent. Solvent extraction method was employed in extracting the oil and the total percent oil yield was found to be 23.8%. The experimentally determined saponification value of the oil was 183.7275mgKOH/g of oil. The detergent efficiency, determined as a measure of the foamability of the detergent was found to be 2.6cm. The pH tests revealed mildly basic ...

  19. Learning Lean: A Survey of Industry Lean Needs

    Science.gov (United States)

    Fliedner, Gene; Mathieson, Kieran

    2009-01-01

    The authors examined business practitioners' preferences for higher education curricula design in general and for what graduates should know about Lean, or waste-reduction efforts. The authors conducted a Web-based survey and found that practitioners are not as concerned about graduates' possessing specific technical skills as they are about them…

  20. The Training Requirements of the Clothing Industry. A Survey of Selected Occupations.

    Science.gov (United States)

    Berry, Kathleen M.; Kuhl, Dean H.

    This survey was conducted in order to determine the training requirements of the clothing industry in South Australia. The results and findings are intended to be used as a means for upgrading and revising the Clothing Production Certificate Course and for providing suitable training programs for other key occupations within the industry. Survey…

  1. Lean production and willingness to change: German industrial survey

    OpenAIRE

    Roessler, Markus Philipp; Spiertz, Daniel; Metternich, Joachim

    2014-01-01

    The Massachusetts Institute of Technology led a global benchmark analysis within the automotive industry in the late 1980s. The results showed significant differences in the organization of production between Western and Japanese companies. For these differences one of the researchers involved, John Kraftcik, distinguished between “lean” and “buffered” production systems. In addition to the fact that Japanese car builders met higher quality standards, also productivity and flexibility were si...

  2. Radionuclide content in laundry detergents commercially available on the Serbian market and assessment of radiological environmental hazards

    Directory of Open Access Journals (Sweden)

    Vukanac Ivana S.

    2017-01-01

    Full Text Available Laundry detergents are chemicals widely used in everyday life, and in numerous industry branches. In order to perceive the radiological aspect of environmental pollution by wastewater, the analysis of laundry detergents available on the Serbian market was undertaken. Laundry detergent samples were measured by means of gamma spectrometry and the results are presented in this paper. Analysis of the obtained activity concentrations showed that laundry detergents in Serbia mostly fulfill the international recommendation and requirements regarding the phosphate content. Besides that, the content of the detected radionuclides in laundry detergent samples indicates the minor radiological risk to the environment via wastewaters. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 171018

  3. Survey Report of Presentation Skills Training in "Fortune 500" Industrial Companies.

    Science.gov (United States)

    Corder, Lloyd E.

    A study surveyed current presentation skills training practices of "Fortune 500" industrial companies. Each company's chief executive officer was sent a cover letter explaining the study and a copy of the survey. Data were obtained from 154 respondents (for a 36% response rate). Results indicated the importance of presentation skills to…

  4. Production of Detergent from Castor Oil

    Directory of Open Access Journals (Sweden)

    Abubakar Garba ISAH

    2006-07-01

    Full Text Available This research work was carried out with the objective of extraction of oil from castor seeds and its utilization to produce a synthetic detergent. Solvent extraction method was employed in extracting the oil and the total percent oil yield was found to be 23.8%. The experimentally determined saponification value of the oil was 183.7275mgKOH/g of oil. The detergent efficiency, determined as a measure of the foamability of the detergent was found to be 2.6cm. The pH tests revealed mildly basic properties. The color, scent and efficiency of the detergent were improved with the addition of bleaching agent, perfume and foaming agents respectively.

  5. Survey of sources of manpower supply for the nuclear power industry

    International Nuclear Information System (INIS)

    1981-01-01

    The following is a report of a survey designed to determine sources of manpower supply available to the Nuclear Power Industry. The survey is part of a larger research effort which is also designed to investigate occupational employment and training in the Nuclear Power Industry and competing sources of demand for technically qualified manpower. The results of those other studies have been published separately and are available upon request. This report includes a brief discussion of the background of the study, the research methods employed, the results obtained, and some implications of those findings. The appendices contain copies of the questionnaires used in the survey as well as some additional related data

  6. Survey on the Use of LCA in European Chemical Industry

    DEFF Research Database (Denmark)

    Olsen, Stig Irving

    1999-01-01

    During 1997 a questionnaire was sent to 40 European chemical manufacturers representing different positions in the supply chain. 25 companies (62.5%) responded, of which 23 had been involved in LCA to some degree. The questionnaire consisted of 30 questions divided into four parts dealing...... industry has taken up the LCA methodology and is testing its applicability for their purposes, although they still feel the methodology is a bit immature. The resources devoted to LCA depends to a great extent on the company's position in the supply chain and on the size of the company. Many of the LCA...

  7. Detergent zeolite complex "Ceosil", Tallinn, Estonia

    OpenAIRE

    Stanković Mirjana S.; Pezo Lato L.

    2003-01-01

    The IGPC Engineering Department, together with the "Birac", Zvornik Engineering Department designed basic projects for detergent zeolite production, using waste flotation sand and hydrates. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects, production plant in Tallinn, Estonia was constructed, with a capacity of 100,000 t/y from 1989. to 1993. This plant became the biggest producer of detergent zeolite in the world.Several goals we...

  8. Fiscal 2000 survey report on the survey and research on green technology industry; 2000 nendo green technology industry ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The approaches of the Government and local autonomies to green technologies are surveyed toward the construction of a green technology industry. The present activities and future outlook of environmental industries interested in green technologies are surveyed and examined, the green technologies here including (1) energy conservation measures and development of non-fossil fuels, (2) energy-related and environmental measures for countering global warming, (3) waste treatment measures for countering dioxins and endocrine disrupters. A survey is conducted of the outlines and future trends of green technology related important studies now under way at laboratories and research institutes of universities, the Government, and private-sector corporations. Based on the results of the surveys, important subjects of technical development in green technologies are extracted and studied for the possibility and outlook of their practical application. Tasks to discharge and problems to occur before they are introduced to the market are also evaluated and confirmed. Based on the results of the research and development of green technologies, actualities of environmental industries are taken up, and the problems and tasks to be settled before environmental technologies are introduced to the market are investigated and studied. (NEDO)

  9. CUSTOMIZATION IN THE MANUFACTURING INDUSTRY: SURVEY RESULTS IN SOUTHEASTERN BRAZIL

    Directory of Open Access Journals (Sweden)

    Alexandre Reis Graeml

    2009-12-01

    Full Text Available This paper discusses the advantage of using kanban, postponement, modularization, just-in-time, production sequencing, milk-run and cross-docking by companies that intend to increase their flexibility, agility and reliability in order to support web-based businesses. It presents the results of a survey carried out with more than 600 manufacturing companies in the state of Sao Paulo, Brazil, and evaluates the changes that are taking place in operations, in order to make companies better suited to provide customized products, which are made to meet the individual requirements of each customer.

  10. CUSTOMIZATION IN THE MANUFACTURING INDUSTRY: SURVEY RESULTS IN SOUTHEASTERN BRAZIL

    Directory of Open Access Journals (Sweden)

    Alexandre Reis Graeml

    2010-01-01

    Full Text Available This paper discusses the advantage of using kanban, postponement, modularization, just-in-time, production sequencing, milk-run and cross-docking by companies that intend to increase their flexibility, agility and reliability in order to support web-based businesses. It presents the results of a survey carried out with more than 600 manufacturing companies in the state of Sao Paulo, Brazil, and evaluates the changes that are taking place in operations, in order to make companies better suited to provide customized products, which are made to meet the individual requirements of each customer.

  11. Survey on the state of nuclear power industry for fiscal 1974. [Japan

    Energy Technology Data Exchange (ETDEWEB)

    1976-05-01

    Results of the survey on the nuclear power industry in Japan for one year up to March 31, 1975 are presented. Carried out each year by JAIF, the survey covering expenditures, proceeds and employes aims to grasp the status of the nuclear power industry, thereby contributing to solid growth of the industry. Of the total 1,165 companies (mining and manufacturing 1,091, electric power 11 and trading 63), 760 answered the questionnaire. Expenditures and proceeds in the mining and manufacturing industry and expenditures in the electric power industry have risen significantly due to inflation. The total expenditures are 650,000 million (42% up); the proceeds in mining and manufacturing enterprises are 279,400 million (72% up) and the dealings by trading firms are 248,100 million (17% up). The total number of employes is 33,307 (17% up).

  12. Public Awareness of and Contact With Physicians Who Receive Industry Payments: A National Survey.

    Science.gov (United States)

    Pham-Kanter, Genevieve; Mello, Michelle M; Lehmann, Lisa Soleymani; Campbell, Eric G; Carpenter, Daniel

    2017-07-01

    The Physician Payments Sunshine Act, part of the Affordable Care Act, requires pharmaceutical and medical device firms to report payments they make to physicians and, through its Open Payments program, makes this information publicly available. To establish estimates of the exposure of the American patient population to physicians who accept industry payments, to compare these population-based estimates to physician-based estimates of industry contact, and to investigate Americans' awareness of industry payments. Cross-sectional survey conducted in late September and early October 2014, with data linkage of respondents' physicians to Open Payments data. A total of 3542 adults drawn from a large, nationally representative household panel. Respondents' contact with physicians reported in Open Payments to have received industry payments; respondents' awareness that physicians receive payments from industry and that payment information is publicly available; respondents' knowledge of whether their own physician received industry payments. Among the 1987 respondents who could be matched to a specific physician, 65% saw a physician who had received an industry payment during the previous 12 months. This population-based estimate of exposure to industry contact is much higher than physician-based estimates from the same period, which indicate that 41% of physicians received an industry payment. Across the six most frequently visited specialties, patient contact with physicians who had received an industry payment ranged from 60 to 85%; the percentage of physicians with industry contact in these specialties was much lower (35-56%). Only 12% of survey respondents knew that payment information was publicly available, and only 5% knew whether their own doctor had received payments. Patients' contact with physicians who receive industry payments is more prevalent than physician-based measures of industry contact would suggest. Very few Americans know whether their own doctor

  13. Survey of Safety Climate in a Petrochemical Industry in Mahshahr

    Directory of Open Access Journals (Sweden)

    Y. Shokoohi

    2012-07-01

    Results and Discussion: Average score of the industry's safety climate was obtained 5.9. Of 17 studied dimensions, 9 dimensions were weak (score less than 6. Lowest score were related to Event & Accident and Change management dimensions. Highest score were related to Individual priorities and need for safety (8.65. Generally relationship between individual variables (ages, work experience, education and safety climate were not significant (P>0.05. Conclusion: Generally one can conclude that individual variables such as age, education and experience have not significant effect on safety climate. It seems that top management forms the organizational climate and consequently safety climate. It reaffirms the basic principle of senior management commitment to safety and its role in preventing accidents. Thus safety climate can be used as a good method for assessing Occupational Health and Safety Management Performance.

  14. A survey of activity-based costing in hotel industry

    Directory of Open Access Journals (Sweden)

    Zadollah Fathi

    2015-09-01

    Full Text Available This paper presents an empirical investigation on implementation of activity based cost (ABC method in hotel industry. The study determines four possible factors of organizational, environmental, individual and technological, which could influence on ABC implementation. The study selects a sample of 205 employees who worked for Laleh International Hotel in Iran. Using one-way t-student test, the study has determined that all variables were effective on ABC implementation while individual factor was the most important one. In addition, correlation test has determined that all variables had meaningful correlations with each other. Further investigation indicates that gender did not play essential role for ABC implementation while experienced employee tended to be more effective for the success of ABC implementation.

  15. Efficiency concept and investigations in insurance industry: A survey

    Directory of Open Access Journals (Sweden)

    Bilel Jarraya

    2013-01-01

    Full Text Available Most recent studies are based on benchmarking analysis allowing the measure of company efficiency relatively to a reference performance. Benchmarking is a helpful tool to analyze and promote efficiency in insurance companies. The fast development of X-efficiency notion makes traditional performance measures (ROA, ROE, etc. obsolete. Indeed, various methods have been used, various input-output measures have been proposed and various research fields have been explored in insurance company investigation. So, after reviewing most known efficiency concepts and their definitions, this section explores the literature review of two principal points of discussion: the first point is focused on the different used techniques to measure efficiency, including the developed approaches to define inputs, outputs and their prices. The second point represents an overview of efficiency investigations in insurance industry.

  16. Closing the door on pharma? A national survey of family medicine residencies regarding industry interactions.

    Science.gov (United States)

    Fugh-Berman, Adriane; Brown, Steven R; Trippett, Rachel; Bell, Alicia M; Clark, Paige; Fleg, Anthony; Siwek, Jay

    2011-05-01

    To assess the extent and type of interactions U.S. family medicine residencies permit industry to have with medical students and residents. In 2008, the authors e-mailed a four-question survey to residency directors or coordinators at all 460 accredited U.S. family medicine residencies concerning the types of industry support and interaction permitted. The authors conducted quantitative and qualitative analyses of survey responses and written comments. Residencies that did not permit any industry food, gifts, samples, or support of residency activities were designated "pharma-free." The survey response rate was 62.2% (286/460). Among responding family medicine residencies, 52.1% refused drug samples, 48.6% disallowed industry gifts or food, 68.5% forbade industry-sponsored residency activities, and 44.1% denied industry access to students and residents at the family medicine center. Seventy-five residencies (26.2%) were designated as "pharma-free." Medical-school-based and medical-school-administered residencies were no more likely than community-based residencies to be pharma-free. Among the 211 programs that permitted interaction, 68.7% allowed gifts or food, 61.1% accepted drug samples, 71.1% allowed industry representatives access to trainees in the family medicine center, and 37.9% allowed industry-sponsored residency activities. Respondents commented on challenges inherent to limiting industry interactions. Many programs noted recent changes in plans or practices. Most family medicine residencies limit industry interaction with trainees. Because industry interactions can have adverse effects on rational prescribing, residency programs should assess the benefits and harms of these relationships. Copyright © by the Association of American medical Colleges.

  17. Environmental health survey in asbestos cement sheets manufacturing industry.

    Science.gov (United States)

    Ansari, F A; Bihari, V; Rastogi, S K; Ashquin, M; Ahmad, I

    2007-01-01

    About 673 small-scale asbestos mining and milling facilities and 33 large - scale asbestos manufacturing plants, (17 asbestos-cement product manufacturing plants and 16 other than asbestos-cement product plants) are situated in India. The present study reveals the exposure of commercial asbestos (chrysotile) in the occupational as well as ambient air environment of the asbestos-cement (AC) sheets industry using membrane filter method of Bureau of Indian Standards (BIS). The fibre concentrations in 15 samples collected in the occupational environment at ingredient feeding site, sheet-producing site, fibre godown were 0.079, 0.057 and 0.078 f/cc, respectively and in five samples from surrounding ambient air at factory gate resulted fibre concentration of 0.071 f/cc. All the samples have shown fibre concentration lower than the threshold limit values (TLVs) prescribed by BIS. Morphological analysis of samples, further under phase contrast and polarized microscopy indicates the presence of chrysotile asbestos, which acts as carcinogen as well as co-carcinogen. A clinical examination of exposed subjects reveals that there was no case of clubbing, crepitation, ronchi and dyspnea on exertion; however, obstruction and restriction were 10.9 per cent and 25 per cent in exposed subjects, respectively while in control there were 12 per cent and 28 per cent, respectively. The study revealed that chrysotile asbestos is emitted in the occupational as well as ambient environment that may cause adverse health impact.

  18. Survey of current lead use, handling, hygiene, and contaminant controls among New Jersey industries.

    Science.gov (United States)

    Blando, James D; Lefkowitz, Daniel K; Valiante, David; Gerwel, Barbara; Bresnitz, Eddy

    2007-08-01

    In 2003, a chemical handling and use survey was mailed to New Jersey employers identified as currently using lead in their industrial processes. This survey was used to ascertain characteristics about lead use, handling, and protection of employees during manufacturing operations. The survey included a diverse group of current lead users with a total lead use range from less than 1 pound to more than 63 million pounds of lead per year. The survey allowed for a comprehensive characterization of hazards and protective measures associated with this metal, still commonly used in many products and industrial processes. Forty-five surveys were returned by companies that are listed in the New Jersey Adult Blood Lead Registry, which is part of the New Jersey Adult Blood Lead Epidemiology and Surveillance (ABLES) program. This program records and investigates cases of adults with greater than 25 mu g/dL of lead in their blood; most cases are related to occupational exposures. This survey found that greater than 25% of these surveyed companies with significant potential for lead exposure did not employ commonly used and basic industrial hygiene practices. In addition, the survey found that 24% of these companies had not conducted air sampling within the last 3 years. Air sampling is the primary trigger for compliance with the Occupational Safety and Health Administration (OSHA) general industry lead standard. Only 17% of the companies have ever been cited for a violation of the OSHA lead standard, and only 46% of these companies have ever had an OSHA inspection. State-based surveillance can be a useful tool for OSHA enforcement activities. Elevated blood lead values in adults should be considered as a trigger for required compliance with an OSHA general industry lead standard.

  19. A study of the decontamination effect of commercial detergents on the skin

    International Nuclear Information System (INIS)

    Takasaki, Koji; Miyabe, Kenjiro

    2003-01-01

    Titanium dioxide paste is generally used as the radiological skin decontaminant in the radiation control area at Japan Nuclear Cycle Development Institute (JNC) Tokai works. It is a typical and proven skin decontaminant in the nuclear industry, but there is a disadvantage in that it has a short shelf life. Recently, many detergents applicable as skin decontaminants have become available in non-nuclear industries such as cosmetics and sanitation. They are easily acquired and have an advantage in that stimulus to the skin is mild, because these products have been developed for the human body. In this study, the decontamination factor of the commercial detergents for each nuclide was examined using imitation skin. Sheets of raw pig skins were contaminated with a nitric-acid solution containing 144 Ce, 137 Cs, 106 Ru or 60 Co, and then washed with various detergents such as a neutral detergent, cleansing cream and orange oil. The nuclide removal rates of some of the commercial detergents examined were nearly equal to that of titanium dioxide, thus proving that they show satisfactory decontamination performance as a skin decontaminant. (author)

  20. The state of the Canadian geothermal heat pump industry 2010 : industry survey and market analysis

    International Nuclear Information System (INIS)

    2010-11-01

    This report provided an overview of the state of the Canadian geothermal heat pump industry for 2010. In 2003, the Canadian GeoExchange Coalition (CGC) embarked on a market transformation initiative that continues to shape Canada's geothermal heat pump markets. The market for ground source heat pumps has grown by more than 60 percent annually in 2006, 2007, and 2008. The large increases in oil prices has created a price effect strong enough to trigger fuel switching for many consumers. Growth in the industry has also coincided with grant and financial assistance programs deployed by provincial governments, utilities, and the federal government. The ecoENERGY retrofitting program initiated in 2007 encouraged the use of geothermal heat pumps in the residential retrofit market. Tax rebate and load programs, as well as direct grants from provincial governments have increased demand in the new-built market. Canada's geothermal heat pump markets are growing much faster than United States geothermal markets. Closed horizontal loop systems accounted for 49.4 percent of residential installations. The CGC has trained over 2968 installers as well as many designers and inspectors for geothermal heat pumps. Colleges and public institutions are now creating training programs related to geothermal energy use. The total economic activity of the geoexchange industry in 2009 was estimated at in excess of $500 million. 29 tabs., 63 figs.

  1. Survey of history/succession of industrial technology. Book of survey of the domestic industrial technology which contributed greatly to the industrial development; Sangyo gijutsu rekishi keisho chosa. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed a history of the industrial technology development which contributed to the innovation of technology in Japan for contribution to the future selection of technical themes and decision on developmental methods. In accordance with the increasing contribution of the Japanese industrial technology to scientific and economic activities in Japan and abroad, it is important to clarify a historical significance of the industrial technology and to make the most of results of the survey for the future succession/development of industrial technology. The survey focused on chemical processes brought up as the Japanese industrial technology which is regarded as world-famous and on the systematical study of the history of the Japanese scientific technology. Hereafter, this becomes a guiding principle for engineers. The paper arranged the survey results of production processes of 2-ethylhexanol, acrylic acid, acrylamide, and cresol/resorcinol, optical resolution process of amino acids, and flue gas desulfurization process. The paper also surveyed technologies of ammonia synthesis, coal liquefaction, high polymer film production and synthesis of medical raw materials. The results were obtained which are suggestive for developing creative/original technology. 210 refs., 93 figs., 49 tabs.

  2. Survey on the consumptions of energy sources in the industry in Italy in 1999

    International Nuclear Information System (INIS)

    Iorio, G.; Perrella, G.; Ballin, M.; Mercanti, A.; Poggi, A.

    2001-01-01

    This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the italian industry. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The energy intensive sectors and the great industries have represented the nucleus of survey. Particular attention has been devoted to the production of energy and the consumption of heat [it

  3. Preclinical QSP Modeling in the Pharmaceutical Industry: An IQ Consortium Survey Examining the Current Landscape

    Science.gov (United States)

    Wu, Fan; Bansal, Loveleena; Bradshaw‐Pierce, Erica; Chan, Jason R.; Liederer, Bianca M.; Mettetal, Jerome T.; Schroeder, Patricia; Schuck, Edgar; Tsai, Alice; Xu, Christine; Chimalakonda, Anjaneya; Le, Kha; Penney, Mark; Topp, Brian; Yamada, Akihiro

    2018-01-01

    A cross‐industry survey was conducted to assess the landscape of preclinical quantitative systems pharmacology (QSP) modeling within pharmaceutical companies. This article presents the survey results, which provide insights on the current state of preclinical QSP modeling in addition to future opportunities. Our results call attention to the need for an aligned definition and consistent terminology around QSP, yet highlight the broad applicability and benefits preclinical QSP modeling is currently delivering. PMID:29349875

  4. Lean applications: a survey of publications with respect to South African industry

    Directory of Open Access Journals (Sweden)

    Dondofema, R. A.

    2017-05-01

    Full Text Available South African industry faces immense global competition from developed countries such as Germany probably because of the adoption of lean manufacturing techniques by the latter. This study is a survey on publications concerning implementation and adoption of lean manufacturing in South Africa. To assess South Africa with regards to research publications on lean manufacturing, a benchmark exercise was conducted with Germany for the period 2014 to 2015. The study concludes by highlighting the gaps identified during this survey and recommendations.

  5. Isomeric Detergent Comparison for Membrane Protein Stability

    DEFF Research Database (Denmark)

    Cho, Kyung Ho; Hariharan, Parameswaran; Mortensen, Jonas S.

    2016-01-01

    and utility, particularly for eukaryotic membrane proteins and membrane protein complexes. Thus, a number of new agents have been devised; some have made significant contributions to membrane protein structural studies. However, few detergent design principles are available. In this study, we prepared meta...... and ortho isomers of the previously reported para-substituted xylene-linked maltoside amphiphiles (XMAs), along with alkyl chain-length variation. The isomeric XMAs were assessed with three membrane proteins, and the meta isomer with a C12 alkyl chain was most effective at maintaining solubility....../stability of the membrane proteins. We propose that interplay between the hydrophile–lipophile balance (HLB) and alkyl chain length is of central importance for high detergent efficacy. In addition, differences in inter-alkyl-chain distance between the isomers influence the ability of the detergents to stabilise membrane...

  6. Detergents of the 21st century

    Directory of Open Access Journals (Sweden)

    Ho Tan Tai Louis

    2001-03-01

    Full Text Available Detergents of the 21st century will depend on evolutions in household appliances, in substrates and in consumer needs. In addition, the environmental constraints, which become more and more stringent, will also play an important role, particularly in the formulations. Surfactants, which constitute one of the main raw materials in detergents, will have to be more environmentally friendly with increasing criteria of biodegradability and renewable materials. Builders (phosphates or zeolithes, heavy metal complexants (EDTA and bleaching agents (combination perborate/TAED are also expected to be replaced by biodegradable compounds, with better performances and lower costs. The real raw materials of the detergents of the 21st century will probably be enzymes (oxidase, hydrolase, peroxidase which present several advantages. At the same time, efforts will be made on biodegradable packaging through the use of micro-organisms able to degrade polymers. Finally, in terms of product forms, the concept of concentration might come back through the use of tablets.

  7. Coproduction of detergent compatible bacterial enzymes and stain removal evaluation.

    Science.gov (United States)

    Niyonzima, Francois N; More, Sunil S

    2015-10-01

    Most of the detergents that are presently produced contain the detergent compatible enzymes to improve and accelerate the washing performance by removing tough stains. The process is environment friendly as the use of enzymes in the detergent formulation reduces the utilization of toxic detergent constituents. The current trend is to use the detergent compatible enzymes that are active at low and ambient temperature in order to save energy and maintain fabric quality. As the detergent compatible bacterial enzymes are used together in the detergent formulation, it is important to co-produce the detergent enzymes in a single fermentation medium as the enzyme stability is assured, and production cost gets reduced enormously. The review reports on the production, purification, characterization and application of detergent compatible amylases, lipases, and proteases are available. However, there is no specific review or minireview on the concomitant production of detergent compatible amylases, lipases, and proteases. In this minireview, the coproduction of detergent compatible enzymes by bacterial species, enzyme stability towards detergents and detergent components, and stain release analysis were discussed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. TEACHING MACHINES AND PROGRAMED LEARNING, A SURVEY OF THE INDUSTRY, 1962.

    Science.gov (United States)

    FINN, JAMES D.; AND OTHERS

    THIS PAPER REPORTS THE DEVELOPMENT OF THE TEACHING MACHINES AND PROGRAMED INSTRUCTION INDUSTRY THROUGH 1961. THIS EFFORT IS AN OUTGROWTH OF TWO LARGER SURVEYS--ONE ON MATERIALS OF INSTRUCTION, THE OTHER ON HARDWARE OR DEVICES. A CATALOG AND A STATUS REPORT ARE GIVEN FOR AVAILABLE TEACHING MACHINES, PROGRAMS, AND MANUFACTURERS. (GD)

  9. A Survey of Security Tools for the Industrial Control System Environment

    Energy Technology Data Exchange (ETDEWEB)

    Hurd, Carl M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); McCarty, Michael V. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-06-12

    This report details the results of a survey conducted by Idaho National Laboratory (INL) to identify existing tools which could be used to prevent, detect, mitigate, or investigate a cyber-attack in an industrial control system (ICS) environment. This report compiles a list of potentially applicable tools and shows the coverage of the tools in an ICS architecture.

  10. A Survey of Security Tools for the Industrial Control System Environment

    International Nuclear Information System (INIS)

    Hurd, Carl M.; McCarty, Michael V.

    2017-01-01

    This report details the results of a survey conducted by Idaho National Laboratory (INL) to identify existing tools which could be used to prevent, detect, mitigate, or investigate a cyber-attack in an industrial control system (ICS) environment. This report compiles a list of potentially applicable tools and shows the coverage of the tools in an ICS architecture.

  11. Results of the 1992 State-Wide Business and Industry Survey.

    Science.gov (United States)

    Jarrett, Carole, Comp.; And Others

    As part of an effort to develop courses and programs that reflect California business and industry's current and future needs, two studies were performed by Solano Community College to examine statewide trends and issues related to office automation and marketing and management. In conducting the study of office automation, 5,000 surveys were…

  12. Work health and safety in cotton ginning industry: a survey of practices in australia

    International Nuclear Information System (INIS)

    Soomro, N.

    2015-01-01

    This survey focuses on the WH and S (Work Health and Safety) practices in Australia and relates them with those in Pakistan. It also highlights the planned areas of work required on WH and S in cotton ginning industry of Pakistan. This article is one a series of research studies that will inform a broader approach development. The aim of the survey was to design a standardized health and safety Act for cotton ginning industry of Pakistan and to help ginners meet their due industry obligations under the model WH and S Act. The first component of the research study survey was to review the relevant Australian work and safety model as this provides a framework to protect the health, safety and welfare of all employees at work and of other people who might be affected by the job. The second aspect of the research study survey concerned site visits to cotton gins with the support of Australian Centre for Agricultural Health and Safety, Moree, NSW. During these visits the existing ginning process in terms of WH and S were reviewed. Informal interviews were also conducted with Gin Managers and Ginning Experts regarding WH and S in the Australian cotton ginning industry. (author)

  13. A survey of approaches combining safety and security for industrial control systems

    International Nuclear Information System (INIS)

    Kriaa, Siwar; Pietre-Cambacedes, Ludovic; Bouissou, Marc; Halgand, Yoran

    2015-01-01

    The migration towards digital control systems creates new security threats that can endanger the safety of industrial infrastructures. Addressing the convergence of safety and security concerns in this context, we provide a comprehensive survey of existing approaches to industrial facility design and risk assessment that consider both safety and security. We also provide a comparative analysis of the different approaches identified in the literature. - Highlights: • We raise awareness of safety and security convergence in numerical control systems. • We highlight safety and security interdependencies for modern industrial systems. • We give a survey of approaches combining safety and security engineering. • We discuss the potential of the approaches to model safety and security interactions

  14. BUSINESS SURVEY LIQUIDITY MEASURE AS A LEADING INDICATOR OF CROATIAN INDUSTRIAL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Mirjana Čižmešija

    2012-12-01

    Full Text Available Business survey liquidity measure is one of the modifications of the uniform EU business survey methodology applied in Croatia. Consequent liquidity problem have been, since socialist times, one of the major problem for Croatia's business. The problem rapidly increased between 1995 and 2000 and now it again represents the main difficulty for the Croatian economy. In order to improve the forecasting properties of business survey liquidity measure, some econometric models ware applied. Based on the regression analysis we concluded that the changes in the liquidity variable can predict the direction of changes in industrial production with one quarter lead. The results also show that liquidity can be a proxy of the Industrial Confidence Indicator in the observed period. The empirical analysis was performed using quarterly data covering the period from the first quarter 2005 to the fourth quarter 2011. The data sources were Privredni vjesnik (a business magazine in Croatia and the Croatian Bureau of Statistics.

  15. A survey of previous and current industry-wide efforts regarding burnup credit

    International Nuclear Information System (INIS)

    Jones, R.H.

    1989-01-01

    Sandia has examined the matter of burnup credit from the perspective of physics, logistics, risk, and economics. A limited survey of the nuclear industry has been conducted to get a feeling for the actual application of burnup credit. Based on this survey, it can be concluded that the suppliers of spent fuel storage and transport casks are in general agreement that burnup credit offers the potential for improvements in cask efficiency without increasing the risk of accidental criticality. The actual improvement is design-specific but limited applications have demonstrated that capacity increases in the neighborhood of 20 percent are not unrealistic. A number of these vendors acknowledge that burnup credit has not been reduced to practice in cask applications and suggest that operational considerations may be more important to regulatory acceptance than to the physics. Nevertheless, the importance of burnup credit to the nuclear industry as a cask design and analysis tool has been confirmed by this survey

  16. Alternative to Water Based Fabric Cleaner in Textile and Detergent Processes

    Directory of Open Access Journals (Sweden)

    Arpan Jain

    2017-01-01

    Full Text Available Three different detergent formulations, (1 ethyl-hydro-oxides (EHOs, using ethanol + H2O2 + KOH + water, without pH adjustment, at 60°C for 1 h, (2 modified EHOs (using ethanol + H2O2 + KOH + water, with pH adjustment, at 40°C for 1 h, and (3 water based detergent (WBD, using commercial detergent T + water, at 40°C for 1 h, were analyzed for cleaning of dried biodiesel soaked cotton cloth (DBSCC samples. The effects of detergent formulations were analyzed based on cloth sample weights (residual and intact and visual (through photographic images examinations. With EHOs formulations, the increasing concentration of KOH and H2O2 had a significant effect on increasing both brightness and residual content of DBSCC samples. On the contrary, the controlled pH environments (as with modified EHOs formulations had a significant effect in decreasing residual content and increasing brightness of DBSCC samples. The implications of EHOs formulations (with and without modification are discussed with respect to current water based textile and detergent industries practices.

  17. Electrocoagulation Process for Treatment of Detergent and Phosphate

    Directory of Open Access Journals (Sweden)

    Afshin Takdastan

    2017-01-01

    Full Text Available Background & Aims of the Study: Detergent and phosphate are one of the main and vital threats (eutrophication phenomenon and production of synthetic foam for the source of drinking water, agriculture and industrial uses in the Ahvaz, Iran that threaten human health. The aim of this study is the evaluation of the efficiency of the electrocoagulation (EC process in the removal of detergent and phosphate from car wash effluent. Materials & Methods: In this experimental study, we used a glass tank with a volume of 2-4 liters (effective volume of 2 liters containing 4 electrode-plate iron and aluminum (AL-AL, AL-Fe, Fe-Fe. Bipolar method was used to convert alternative electricity to direct; electrodes were connected to a power supply. Daily samples were collected from different car washes sewage. Initial PHs of samples was from 7 to 9. At first, different tests were performed on primary samples. Reaction times were set for 90, 60 and 30 minutes with middle intervals of 2 cm. Results: According to the result of this study, percentage of phosphate removal in the EC with Al-Fe electrode, with an optimum pH = 7, has been from 34 % (in the 10 Volt to 78% (in the 30 Volt. Percentage of detergent removal in the EC with AL electrode, with an optimum pH = 7, has been from 68 % (in the 10 Volt to 94% (in the 30 Volt. Conclusions: Altogether, it was found that this method can be used as a confident and convenient method for treating car wash effluent and according to the highest removal efficiency of the process, effluent can be discharged safely into the environment.

  18. Static light scattering to characterize membrane proteins in detergent solution

    NARCIS (Netherlands)

    Slotboom, Dirk Jan; Duurkens, Ria H.; Olieman, Kees; Erkens, Guus B.

    2008-01-01

    Determination of the oligomeric state or the subunit stoichiometry of integral membrane proteins in detergent solution is notoriously difficult, because the amount of detergent (and lipid) associated with the proteins is usually not known. Only two classical methods (sedimentation equilibrium

  19. Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Azimi, S.A.; Conrad, J.L.; Reed, J.E.

    1985-03-01

    Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

  20. Detergents - Zeolites and Enzymes Excel Cleaning Power

    Indian Academy of Sciences (India)

    Presently used detergent formulations generally consist of surfactants, builder and cobuilder, bleaching agents, addi- tives for secondary benefits and enzymes. Zeolites are basically hydrated crystalline aluminium silicates which function as ion exchangers and make the water soft by removing calcium, magnesium and ...

  1. 40 CFR 80.163 - Detergent certification options.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Detergent certification options. 80... options. To be used to satisfy the detergency requirements under § 80.161(a), a detergent additive must be certified in accordance with the requirements of one or more of the options and suboptions described in this...

  2. 40 CFR 80.141 - Interim detergent gasoline program.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Interim detergent gasoline program. 80... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Detergent Gasoline § 80.141 Interim detergent gasoline... apply to: (i) All gasoline sold or transferred to a party who sells or transfers gasoline to the...

  3. Enzymes used in detergents: Lipases | Hasan | African Journal of ...

    African Journals Online (AJOL)

    This review describes the applications of microbial lipases in detergents. Enzymes can reduce the environmental load of detergent products as the chemicals used in conventional detergents are reduced; they are biodegradable, non-toxic and leave no harmful residues. Besides lipases, other enzymes are widely used in ...

  4. Understanding energy efficiency barriers in Ukraine: Insights from a survey of commercial and industrial firms

    International Nuclear Information System (INIS)

    Timilsina, Govinda R.; Hochman, Gal; Fedets, Iryna

    2016-01-01

    Improvement of energy efficiency is an important element of energy policy for a sustainable supply of energy in Ukraine. However, the country is facing several challenges to the large-scale deployment of energy efficient technologies. We conducted a two-stage quota sample survey of 509 commercial and industrial firms of all regions of Ukraine to understand the barriers to energy efficiency improvements. Our study finds that more than two-thirds of the commercial and industrial firms in the country view improvement of energy efficiency very important to their business. However, due to several barriers they are unable to realize the improvements of energy efficiency. Among the 19 potential barriers investigated in the study, the survey results show that high upfront investment requirement, lack of government policies to support energy efficiency improvements, higher cost of capital, and lack of information and awareness are the most critical barriers to the improvement of energy efficiency in the industrial and commercial sectors in Ukraine. - Highlights: • Despite attractiveness, large scale deployment of energy efficiency is lacking. • Several barriers are responsible for slow implementation of energy efficiency. • Understanding the barriers from the field is crucial to design effective policies. • A survey of commercial and industrial firms reveals the key barriers. • Financial barriers are the main hurdles to adopt energy efficient technologies.

  5. Guide to resource conservation and cost savings opportunities in the soap, detergents and related products sector

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The soaps, detergents and related products sector is an important component of the chemical industry within Ontario, as these products are used for cleaning purposes in industrial, institutional and domestic consumer applications. This guide was prepared to assist the sector with cost savings and resource conservation. The guide highlights opportunities for resource conservation through energy and water efficiency improvements, more efficient utilisation of raw materials, and reduction of environmental releases at source. 54 figs.

  6. Mapping performance of the fishery industries innovation: A survey in the North Coast of Java

    Science.gov (United States)

    Yusuf, M.; Legowo, A. M.; Albaarri, A. N.; Darmanto, Y. S.; Agustini, T. W.; Setyastuti, A. I.

    2018-01-01

    This study aimed to put the performance indicators of industry innovation fisheries which would be used as inputs to create innovation strategies in order to win the market competition, especially in USA. Survey and in-depth interviews were conducted on 10 industries with shrimp, tuna and crab commodities representing the fishery industry in Indonesia to USA export destination. The result of mapping performance of innovation indicators of Indonesian Fishery Industry resulted the 10’s strategies alternative to win the market. Based on survey result indicate that “the regulation of catch and/or harvest of cultivation factor” is considered the weakest factor in develop innovation with a score of 3.3, while the international trade factor are considered as the strongest factor in developing innovation development with scores 5,0. Aggressive strategy by strengthening the strength owned by the internal industry was by always looking at the opportunity, so that they could take the opportunity to win the market competition at the right time.

  7. Aerial radiological survey of the Industrial Reactor Laboratory and surrounding area Plainsboro, New Jersey

    International Nuclear Information System (INIS)

    1980-12-01

    An airborne radiological survey of a 6 km 2 area centered over the Industrial Reactor Laboratory was made 25-27 July 1979. Detected radioisotopes and their associated gamma ray exposure rates were consistent with that expected from normal background emitters, except at two locations described in this report. Count rates observed at 46 m altitude were converted to exposure rates at 1 m above the ground and are presented in the form of an isopleth map

  8. Solubilization of glycoproteins of envelope viruses by detergents

    International Nuclear Information System (INIS)

    Berezin, V.E.; Zaides, V.M.; Artamsnov, A.F.; Isaeva, E.S.; Zhdanov, V.M.

    1986-01-01

    The action of a number of known ionic and nonionic detergents, as well as the new nonionic detergent MESK, on envelope viruses was investigated. It was shown that the nonionic detergents MESK, Triton X-100, and octyl-β-D-glucopyranoside selectively solubilize the outer glycoproteins of the virus particles. The nonionic detergent MESK has the mildest action. Using MESK, purified glycoproteins of influenza, parainfluenza, Venezuelan equine encephalomyelitis, vesicular stomatitis, rabies, and herpes viruses were obtained. The procedure for obtaining glycoproteins includes incubation of the virus suspension with the detergent MESK, removal of subvirus structures by centrifuging, and purification of glycoproteins from detergents by dialysis. Isolated glycoproteins retain a native structure and biological activity and possess high immunogenicity. The detergent MESK is promising for laboratory tests and with respect to the production of subunit vaccines

  9. Efficient Consumer Response (ECR: a survey of the Australian grocery industry

    Directory of Open Access Journals (Sweden)

    Paula Swatman

    1998-05-01

    Full Text Available Efficient consumer response (ECR is a U.S. supply chain management strategy which attempts to address the inefficiencies which have led to excessive inventory and unnecessary costs at all levels within the grocery industry supply chain. This paper discusses the traditional grocery store format, the supermarket, and the ways in which inefficient business practices developed in the U.S. grocery supply chain; and discusses the major business activities needed for successful implementation of ECR. The paper then presents a brief summary of the results of a survey of ECR knowledge and usage within the Australian grocery industry, which is the initial phase of a long term research project whose main purpose is to evaluate ECR as it applies to that industry.

  10. Survey on Wireless Sensor Network Technologies for Industrial Automation: The Security and Quality of Service Perspectives

    Directory of Open Access Journals (Sweden)

    Delphine Christin

    2010-04-01

    Full Text Available Wireless Sensor Networks (WSNs are gradually adopted in the industrial world due to their advantages over wired networks. In addition to saving cabling costs, WSNs widen the realm of environments feasible for monitoring. They thus add sensing and acting capabilities to objects in the physical world and allow for communication among these objects or with services in the future Internet. However, the acceptance of WSNs by the industrial automation community is impeded by open issues, such as security guarantees and provision of Quality of Service (QoS. To examine both of these perspectives, we select and survey relevant WSN technologies dedicated to industrial automation. We determine QoS requirements and carry out a threat analysis, which act as basis of our evaluation of the current state-of-the-art. According to the results of this evaluation, we identify and discuss open research issues.

  11. PDA survey of quality risk management practices in the pharmaceutical, devices, & biotechnology industries.

    Science.gov (United States)

    Ahmed, Ruhi; Baseman, Harold; Ferreira, Jorge; Genova, Thomas; Harclerode, William; Hartman, Jeffery; Kim, Samuel; Londeree, Nanette; Long, Michael; Miele, William; Ramjit, Timothy; Raschiatore, Marlene; Tomonto, Charles

    2008-01-01

    In July 2006 the Parenteral Drug Association's Risk Management Task Force for Aseptic Processes, conducted an electronic survey of PDA members to determine current industry practices regarding implementation of Quality Risk Management in their organizations. This electronic survey was open and publicly available via the PDA website and targeted professionals in our industry who are involved in initiating, implementing, or reviewing risk management programs or decisions in their organizations. One hundred twenty-nine members participated and their demographics are presented in the sidebar "Correspondents Profile". Among the major findings are: *The "Aseptic Processing/Filling" operation is the functional area identified as having the greatest need for risk assessment and quality risk management. *The most widely used methodology in industry to identify risk is Failure Mode and Effects Analysis (FMEA). This tool was most widely applied in assessing change control and for adverse event, complaint, or failure investigations. *Despite the fact that personnel training was identified as the strategy most used for controlling/minimizing risk, the largest contributors to sterility failure in operations are still "Personnel". *Most companies still rely on "Manufacturing Controls" to mitigate risk and deemed the utilization of Process Analytical Technology (PAT) least important in this aspect. *A majority of correspondents verified that they did not periodically assess their risk management programs. *A majority of the correspondents desired to see case studies or examples of risk analysis implementation (as applicable to aseptic processing) in future PDA technical reports on risk management.

  12. Benzene exposure in the shoemaking industry in China, a literature survey, 1978-2004.

    Science.gov (United States)

    Wang, Laiming; Zhou, Yimei; Liang, Youxin; Wong, Otto; Armstrong, Thomas; Schnatter, A Robert; Wu, Qiangen; Fang, Jinbin; Ye, Xibiao; Fu, Hua; Irons, Richard D

    2006-11-01

    This article presents a summary of benzene exposure levels in the shoemaking industry in China reported in the Chinese medical literature between 1978 and 2004. A comprehensive search identified 182 papers reporting such exposure data. These papers could be classified into two categories: benzene poisoning case reports and industrial hygiene surveys. From each paper, the following information was abstracted whenever available: location and year of occurrence, occupation and/or task involved, benzene content in adhesives/solvents, work environment, working conditions, working hours, diagnosis, and air monitoring data of benzene. A total of 333 benzene measurements (88 averages, 116 minimums, 129 maximums) in the shoemaking industry were reported in the 182 papers identified. The data were analyzed in terms of geographical location, time period, type of ownership (state, township, or foreign), type of report (benzene poisoning reports vs. industrial hygiene surveys), and job title (work activity) or process. The reported data covered a wide range; some measurements were in excess of 4500 mg/m(3). Thirty-five percent of the reported benzene concentrations were below 40 mg/m(3), which was the national occupational exposure limit (OEL) for benzene between 1979 and 2001. The remaining 65% measurements, which exceeded the national OEL in effect at the time, and were distributed as follows: 40-100 mg/m(3), 11%; 100-300 mg/m(3), 21%; 300-500 mg/m(3), 13%; and 500+ mg/m(3), 20%. However, only 24% of the reported measurements after 2002 were below 6 mg/m(3), i.e., Permissible Concentration-Time Weighted Average (PC-TWA) and 10 mg/m(3), i.e., Permissible Concentration-Short Term Exposure Limit (PC-STEL), the newly amended benzene OELs in effect after May 2002. The data demonstrated that the majority of the facilities in the shoemaking industry reported in the literature were not in compliance of the OEL for benzene in effect at the time. Overall, the data show a clear downward

  13. Characterization of detergent compatible protease from halophilic Virgibacillus sp. CD6.

    Science.gov (United States)

    Lam, Ming Quan; Nik Mut, Nik Nurhidayu; Thevarajoo, Suganthi; Chen, Sye Jinn; Selvaratnam, Chitra; Hussin, Huszalina; Jamaluddin, Haryati; Chong, Chun Shiong

    2018-02-01

    A halophilic bacterium, Virgibacillus sp. strain CD6, was isolated from salted fish and its extracellular protease was characterized. Protease production was found to be highest when yeast extract was used as nitrogen source for growth. The protease exhibited stability at wide range of salt concentration (0-12.5%, w/v), temperatures (20-60 °C), and pH (4-10) with maximum activity at 10.0% (w/v) NaCl, 60 °C, pH 7 and 10, indicating its polyextremophilicity. The protease activity was enhanced in the presence of Mg 2+ , Mn 2+ , Cd 2+ , and Al 3+ (107-122% relative activity), and with retention of activity > 80% for all of other metal ions examined (K + , Ca 2+ , Cu 2+ , Co 2+ , Ni 2+ , Zn 2+ , and Fe 3+ ). Both PMSF and EDTA inhibited protease activity, denoting serine protease and metalloprotease properties, respectively. High stability (> 70%) was demonstrated in the presence of organic solvents and detergent constituents, and the extracellular protease from strain CD6 was also found to be compatible in commercial detergents. Proteinaceous stain removal efficacy revealed that crude protease of strain CD6 could significantly enhance the performance of commercial detergent. The protease from Virgibacillus sp. strain CD6 could serve as a promising alternative for various applications, especially in detergent industry.

  14. Employee problems and their consequences in the technology industry: evidence from surveys and counseling records.

    Science.gov (United States)

    Wang, Ching-Wen; Lin, Po-Chang; Sha, Chyuan

    2014-06-01

    To support employees' work and health, organizations should help employees cope with common problems. Previous studies have focused primarily on work-related problems across multiple industries rather than on evaluating industry-specific issues. Here, two approaches identified common work and non-work employee problems in the technology industry with the strongest correlations with psychosomatic health and life satisfaction. Study 1 used questionnaires to identify the problems that were perceived as the most frequent by lower-level employees (N = 355) working in the technology industry. Study 2 evaluated employees' coping behaviors by analyzing (with permission) counseling records collected from an employee assistance service company (N = 276). Employees reported a variety of problems; work problems were the only problems (of the top 5 problems) reported in both studies. Several problems emerged in the counseling records (e.g., legal issues, career development, family and marriage problems, and emotional problems) but not in the surveys. Future research should apply these observations to develop scales for measuring employee stressors.

  15. Innovation indicators: a survey of innovative activities in the international food processed industry

    Directory of Open Access Journals (Sweden)

    Vinicius Cardoso de Barros Fornari

    2015-02-01

    Full Text Available This paper seeks to combine traditional methods of measuring intensity with other alternative indicators to examine the dispersion of innovation activities in different industries and countries. The hypothesis that underlies the study lies in the fact that in the Food Processed Industry (IAP the traditional methods are insufficient to detect the core of the innovation process. As method, we analyzed patent data extracted from the twenty-five largest food processed companies in the world and suggested different indicators developed from the Pesquisa de Inovação Tecnológica (PINTEC, 2010 – for Brazilian companies – and the Community Innovation Survey (CIS, 2009 – for European Union companies. The results allowed us to establish relationships in three dimensions: (i the complexity of the innovative effort of the IAP; (ii the efforts to innovation in different countries are distinct and; (iii there is heterogeneity in country performance.

  16. Stress corrosion cracking of low pressure turbine discs - an industry survey

    International Nuclear Information System (INIS)

    Lyle, F.F. Jr.; Lamping, G.A.; Leverant, G.R.

    1981-01-01

    Comprehensive industry survey identifies the key factors responsible for a large number of stress corrosion cracking incidents in low-pressure steam turbine discs of U.S. power plants. The survey included interviews with domestic and foreign utilities, as well as a review of available public documents. Plant operating practices, water treatment methods, turbine design and stress levels, and alloy chemistry and mechanical properties were among the principal variables considered in the study. Analyses of the data identified six potential key variables. Summaries of foreign and U.S. disc-cracking experience, relationship between variables and cracking experience, and the potential key cracking variables identified are presented in this paper. 11 refs

  17. Industry and Patient Perspectives on Child Participation in Clinical Trials: The Pediatric Assent Initiative Survey Report.

    Science.gov (United States)

    Lombardi, Donald; Squires, Liza; Sjostedt, Philip; Eichler, Irmgard; Turner, Mark A; Thompson, Charles

    2018-01-01

    Obtaining assent from children participating in clinical trials acknowledges autonomy and developmental ability to contribute to the consent process. This critical step in pediatric drug development remains poorly understood, with significant room for improving the clarity, efficiency, and implementation of the assent process. Beyond ethical necessity of informing children about their treatment, the assent process provides the advantages of including children in discussions about their diagnosis and treatment-allowing greater understanding of interventions included in the study. A formalized assent process acknowledges the child as a volunteer and provides a forum for questions and feedback. Legal, cultural, and social differences have historically prevented the development of clear, concise, and accessible materials to ensure children understand the clinical trial design. Published guidelines on obtaining pediatric assent are vague, with many decisions left to local institutional review boards and ethics committees, underscoring the need for collaboratively designed standards. To address this need, 2 surveys were conducted to quantify perspectives on assent in pediatric clinical trials. Two digital surveys were circulated in the United States and internationally (October 2014 to January 2015). The first survey targeted children, parents, and/or caregivers. The second polled clinical trial professionals on their organizations' experience and policies regarding pediatric assent. Forty-five respondents completed the child and parent/caregiver survey; 57 respondents completed the industry survey. Respondents from both surveys detailed experiences with clinical trials and the impediments to securing assent, offering potential solutions to attaining assent in pediatric patients. An important opportunity exists for standardized practices and tools to ensure pediatric patients make well-informed decisions regarding their participation in clinical trials, using materials

  18. Survey of active solar thermal collectors, industry and markets in Canada : final report

    International Nuclear Information System (INIS)

    2005-08-01

    A survey of the solar thermal industry in Canada was presented. The aim of the survey was to determine the size of the Canadian solar thermal industry and market. Data were used to derive thermal energy output as well as avoided greenhouse gas (GHG) emissions from solar thermal systems. The questionnaire was distributed to 268 representatives. Results revealed annual sales of 24.2, 26.4 and 37.5 MW TH in 2002, 2003, and 2004 respectively, which represented over 50 per cent growth in the operating base during the 3 year survey period. Sales of all collector types grew substantially during the 3 year period, and survey respondents anticipated 20 per cent growth in both 2005 and 2006. Approximately 10 per cent of all sales were exported during 2002-2004. Unglazed liquid collectors constituted the majority of collector types sold in Canada, almost all of which were sold into the residential sector for swimming pool heating. The majority of air collectors were sold into the industrial/commercial and institutional (I/CI) sectors for use in space heating. Sales of liquid glazed and evacuated tube collectors were split between the residential and I/CI sectors. Residential sales were primarily for domestic water heating. In 2004, 23 per cent of sales in the residential sector were for combination domestic hot water and space heating applications, an indication of strong growth. Results of the survey indicated that the solar thermal market in Quebec differed from other regions, with more than double the annual per capita revenue of any other region as a result of greater market penetration of unglazed air collectors. Calculations of the GHG emissions avoided due to active solar thermal systems were made based on historical estimates of solar thermal installations. A model was developed to calculate an operating base by collector type from 1979 to the present. The model showed that many of the systems installed during the 1980s were decommissioned during the 1990s, and that

  19. Survey of active solar thermal collectors, industry and markets in Canada : final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-08-01

    A survey of the solar thermal industry in Canada was presented. The aim of the survey was to determine the size of the Canadian solar thermal industry and market. Data were used to derive thermal energy output as well as avoided greenhouse gas (GHG) emissions from solar thermal systems. The questionnaire was distributed to 268 representatives. Results revealed annual sales of 24.2, 26.4 and 37.5 MW{sub TH} in 2002, 2003, and 2004 respectively, which represented over 50 per cent growth in the operating base during the 3 year survey period. Sales of all collector types grew substantially during the 3 year period, and survey respondents anticipated 20 per cent growth in both 2005 and 2006. Approximately 10 per cent of all sales were exported during 2002-2004. Unglazed liquid collectors constituted the majority of collector types sold in Canada, almost all of which were sold into the residential sector for swimming pool heating. The majority of air collectors were sold into the industrial/commercial and institutional (I/CI) sectors for use in space heating. Sales of liquid glazed and evacuated tube collectors were split between the residential and I/CI sectors. Residential sales were primarily for domestic water heating. In 2004, 23 per cent of sales in the residential sector were for combination domestic hot water and space heating applications, an indication of strong growth. Results of the survey indicated that the solar thermal market in Quebec differed from other regions, with more than double the annual per capita revenue of any other region as a result of greater market penetration of unglazed air collectors. Calculations of the GHG emissions avoided due to active solar thermal systems were made based on historical estimates of solar thermal installations. A model was developed to calculate an operating base by collector type from 1979 to the present. The model showed that many of the systems installed during the 1980s were decommissioned during the 1990s, and

  20. Results of the radiological survey at 80 Industrial Road, Lodi, New Jersey (LJ061)

    International Nuclear Information System (INIS)

    Foley, R.D.; Carrier, R.F.; Floyd, L.M.; Crutcher, J.W.

    1989-07-01

    Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 80 Industrial Road, Lodi, New Jersey (LJ061), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of DOE remedial action criteria, primarily from the 232 Th decay chain, with some contamination from 226 Ra. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs., 11 figs., 3 tabs

  1. Industry Wage Surveys: Banking and Life Insurance, December 1976. Part I--Banking. Part II--Life Insurance. Bulletin 1988.

    Science.gov (United States)

    Barsky, Carl

    This report presents the results of a survey conducted by the Bureau of Labor Statistics to determine wages and related benefits in (1) the banking industry and (2) for employees in home offices and regional head offices of life insurance carriers. Part 1 discusses banking industry characteristics and presents data for tellers and selected…

  2. GPR survey, as one of the best geophysical methods for social and industrial needs

    Science.gov (United States)

    Chernov, Anatolii

    2016-04-01

    This paper is about ways and methods of applying non-invasive geophysical method - Ground penetrating radar (GPR) survey in different spheres of science, industry, social life and culture. Author would like to show that geological methods could be widely used for solving great variety of industrial, human safety and other problems. In that article, we take GPR survey as an example of such useful geophysical methods. It is a fact that investigation of near surface underground medium is important process, which influence on development of different spheres of science and social life: investigation of near surface geology (layering, spreading of rock types, identification of voids, etc.), hydrogeology (depth to water horizons, their thickness), preparation step for construction of roads and buildings (civil geology, engineering geology), investigation of cultural heritage (burial places, building remains,...), ecological investigations (land slides, variation in underground water level, etc.), glaciology. These tasks can be solved by geological methods, but as usual, geophysical survey takes a lot of time and energy (especially electric current and resistivity methods, seismic survey). Author claims that GPR survey can be performed faster than other geophysical surveys and results of GPR survey are informative enough to make proper conclusions. Some problems even cannot be solved without GPR. For example, identification of burial place (one of author's research objects): results of magnetic and electric resistivity tomography survey do not contain enough information to identify burial place, but according to anomalies on GPR survey radarograms, presence of burial place can be proven. Identification of voids and non-magnetic objects also hardly can be done by another non-invasive geophysics surveys and GPR is applicable for that purpose. GPR can be applied for monitoring of dangerous processes in geological medium under roads, buildings, parks and other places of human

  3. Thermostable, alkaline and detergent-tolerant lipase from a newly isolated thermophilic Bacillus stearothermophilus.

    Science.gov (United States)

    Ben Bacha, Abir; Moubayed, Nadine M S; Abid, Islam

    2015-04-01

    Lipases are the enzymes of choice for laundry detergent industries, owing to their triglyceride removing ability from the soiled fabric, which eventually reduces the usage of phosphate-based chemical cleansers in the detergent formulation. In this study, a novel thermo-alkaline lipase-producing strain identified as Bacillus stearothermophilus was isolated from the soil samples of olive oil mill. Enhanced lipase production was observed at 55 degrees C, pH 11 and after 48 h of incubation. Among the substrates tested, xylose (a carbon source), peptone (a nitrogen source) and olive oil at a concentration of 1% were suitable substrates for enhancing lipase production. MgSO4 and Tween-80 were suitable substrates for maximizing lipase production. The enzyme was purified to homogeneity by a single CM-Sephadex column chromatography and revealed molecular mass of 67 kDa. The enzyme (BL1) was active over a wide range of pH from 9.0 to 13.0, with an optimum at pH 11.0, exhibited maximal activity at 55 degreesC and retained more than 70% of its activity after incubation at 70 degrees C or pH 13 for 0.5 h or 24 h, respectively. The enzyme hydrolyzed both short and long-chain triacylglycerols at comparable rates. BL1 was studied in a preliminary evaluation for use in detergent formulation solutions. This novel lipase showed extreme stability towards non-ionic and anionic surfactants after pre-incubation for 1 h at 40 degrees C, and good stability towards oxidizing agents. Additionally, the enzyme showed excellent stability and compatibility with various commercial detergents, suggesting its potential as an additive in detergent formulations.

  4. ACTION OF SYNTHETIC DETERGENTS ON THE METABOLISM OF BACTERIA.

    Science.gov (United States)

    Baker, Z; Harrison, R W; Miller, B F

    1941-01-31

    A study of the effects of synthetic detergents and wetting agents on respiration and glycolysis of Gram-positive and Gram-negative microorganisms has led to the following conclusions. 1. All the cationic detergents studied are very effective inhibitors of bacterial metabolism at 1:3000 concentration, and several are equally active at 1:30,000. Few of the anionic detergents inhibit as effectively as the cationic compounds. 2. Gram-positive and Gram-negative microorganisms are equally sensitive to the action of the cationic detergents. On the other hand, all the anionic detergents included in our studies selectively inhibit the metabolism of Gram-positive microorganisms. 3. The inhibitory action of both types of detergents is influenced markedly by hydrogen ion concentration. Cationic detergents exhibit their maximum activity in the alkaline pH range, and the anionic, in the acid range. 4. Studies of homologous series of straight chain alkyl sulfates and sulfoacetates (C(8) to C(18)) demonstrate that maximum inhibition is exerted by the 12, 14, and 16 carbon compounds (lauryl, myristyl, and cetyl). 5. It has been observed that three lauryl esters of amino acids are powerful inhibitors of bacterial metabolism. To our knowledge, the effects on bacterial metabolism of such cationic detergents (without the quaternary ammonium structure) have not been studied previously. Our results demonstrate that other cationic detergents can exhibit an inhibitory activity comparable to quaternary ammonium compounds. 6. Certain detergents stimulate bacterial metabolism at concentrations lower than the inhibiting values. This effect has been found more frequently among the anionic detergents.

  5. Report of fact finding survey on atomic energy industries in FY1989

    International Nuclear Information System (INIS)

    1991-01-01

    Japan Atomic Industrial Forum, Inc. summarized the results of 31st fact finding survey on atomic energy industries, which investigated and analyzed the actual status and future perspective of the expenditure, sales and personnel related to atomic energy in electric power, mining and manufacture and trading companies in FY1989. As to the state of activities of atomic energy industries, the expenditure related to atomic energy of electric power companies was 1633.7 billion yen, decrease by 7 % as compared with the previous fiscal year. The main factors are that the construction works of nuclear power stations came to temporary pause, and the operation and maintenance expenses for power stations turned to decrease due to the mechanization of inspection and the decrease of expendables. The sales related to atomic energy of mining and manufacturing companies was 1728.3 billion yen, which is the highest so far, and is increase by 18 % as compared with the previous fiscal year. Due to the diversification of atomic energy market, the manufacture for service field and others grew by 64 %, and the mechanization of production seemed to advance. The backlog of mining and manufacturing companies which is the index of future market trend was as high as 3526 billion yen. (K.I.)

  6. Information Sharing, Cooperative Behaviour and Hotel Performance: A Survey of the Kenyan Hospitality Industry

    Directory of Open Access Journals (Sweden)

    Sammy Odari Namusonge

    2015-10-01

    Full Text Available Information sharing is the life blood of supply chain collaboration. Its role in achieving operational performance of supply chains has been widely acclaimed. However whether information sharing would result in improved performance in the context of the hospitality industry has not been empirically determined. This study sought to find out the role of information sharing on hotel performance when the relationship was mediated by cooperative behaviour. A survey design was employed where proportionate stratified sampling was used to select 50 out of 57 town hotels. Data was collected through the use of questionnaires as well interview guides to the procurement\\supply chain departments of these hotels. Logarithmic transformations were used in conjunction with multiple regression analysis to determine the relationship between information sharing, cooperative behaviour and hotel performance. The study concludes that information sharing in the Kenyan hospitality industry does not directly relate to hotel performance. Its relationship is mediated by cooperative behaviour (trust and attitude with supply chain partners. This suggests that information sharing is essential but insufficient by itself to bring significant performance improvements in hotels in the Kenyan hospitality industry. A possible reason for this is that this collaborative practice is highly dependent on information sharing capability, structure of the information as well as culture. Through quadrant analysis the study identifies and recommends the sharing of information about long term strategic plans and events such as entering new markets and acquiring a new customer base as an area of primary priority for improvement.

  7. Sustainable electricity generation from oil palm biomass wastes in Malaysia: An industry survey

    International Nuclear Information System (INIS)

    Umar, Mohd Shaharin; Jennings, Philip; Urmee, Tania

    2014-01-01

    The biomass wastes from the palm oil industry offer great potential for large-scale power generation in Malaysia. It has been estimated that 85.5% of available biomass in the country comes from oil palm agriculture. The introduction of the FiT (Feed-in Tariff) regime in 2011, which superseded the underperforming SREP (Small Renewable Energy Power) scheme, is expected to catalyse and accelerate the development of the renewable energy industry, including biomass technology. Despite a major overhaul of the market structure under the new scheme, the sustainability of the grid-connected oil palm biomass renewable energy industry downstream components remains questionable. Hence, this paper aims to investigate and analyse the market response to six sustainability-related topics. The research methods include electronic and conventional postal modes to disseminate questionnaires to all of the palm oil producers. The returned questionnaires were then analysed with a statistical tool and inferences were drawn to identify the gaps in the existing policy system. The survey identified several key factors for the government's consideration. - Highlights: • Establishing a fuel collection hub. • Centralising a technology hub facility. • Smart-partnership collaboration for building a large scale biomass plant. • Adopting decentralised generation

  8. Tax and Fiscal Policies for Promotion of Industrial EnergyEfficiency: A Survey of International Experience

    Energy Technology Data Exchange (ETDEWEB)

    Price, Lynn; Galitsky, Christina; Sinton, Jonathan; Worrell,Ernst; Graus, Wina

    2005-09-15

    The Energy Foundation's China Sustainable Energy Program (CSEP) has undertaken a major project investigating fiscal and tax policy options for stimulating energy efficiency and renewable energy development in China. This report, which is part of the sectoral sub-project studies on energy efficiency in industry, surveys international experience with tax and fiscal policies directed toward increasing investments in energy efficiency in the industrial sector. The report begins with an overview of tax and fiscal policies, including descriptions and evaluations of programs that use energy or energy-related carbon dioxide (CO2) taxes, pollution levies, public benefit charges, grants or subsidies, subsidized audits, loans, tax relief for specific technologies, and tax relief as part of an energy or greenhouse gas (GHG) emission tax or agreement scheme. Following the discussion of these individual policies, the report reviews experience with integrated programs found in two countries as well as with GHG emissions trading programs. The report concludes with a discussion of the best practices related to international experience with tax and fiscal policies to encourage investment in energy efficiency in industry.

  9. Survey of competing sources of manpower demand related to the nuclear power industry. Manpower studies series, Report No. 3 (Draft)

    International Nuclear Information System (INIS)

    1981-01-01

    The following is a report of a survey designed to determine competing sources of demand for technically qualified manpower. The survey is part of a larger research effort which is also designed to investigate occupational employment and training in the nuclear power industry and sources of manpower supply available to the industry. The results of those other studies have been published separately and ara available upon request. This report includes a brief discussion of the background of the study, the research methods employed, the results obtained, and some implications of those findings. The appendices contain copies of the questionnaires used in the survey as well as some additional related data

  10. Anaerobic codigestion of municipal, farm, and industrial organic wastes: a survey of recent literature.

    Science.gov (United States)

    Alatriste-Mondragón, Felipe; Samar, Parviz; Cox, Huub H J; Ahring, Birgitte K; Iranpour, Reza

    2006-06-01

    Codigestion of organic wastes is a technology that is increasingly being applied for simultaneous treatment of several solid and liquid organic wastes. The main advantages of this technology are improved methane yield because of the supply of additional nutrients from the codigestates and more efficient use of equipment and cost-sharing by processing multiple waste streams in a single facility. Many municipal wastewater treatment plants (WWTPs) in industrialized countries currently process wastewater sludge in large digesters. Codigestion of organic wastes with municipal wastewater sludge can increase digester gas production and provide savings in the overall energy costs of plant operations. Methane recovery also helps to reduce the emission of greenhouse gases to the atmosphere. The goal of this literature survey was to summarize the research conducted in the last four years on anaerobic codigestion to identify applications of codigestion at WWTPs. Because the solids content in municipal wastewater sludge is low, this survey only focuses on codigestion processes operated at relative low solids content (slurry mode). Semi-solid or solid codigestion processes were not included. Municipal wastewater sludge, the organic fraction of municipal solid waste, and cattle manure (CAM) are the main wastes most often used in codigestion processes. Wastes that are codigested with these main wastes are wood wastes, industrial organic wastes, and farm wastes. These are referred to in this survey as codigestates. The literature provides many laboratory studies (batch assays and bench-scale digesters) that assess the digestibility of codigestates and evaluate the performance and monitoring of codigestion, inhibition of digestion by codigestates, the design of the process (e.g., single-stage or two-stage processes), and the operation temperature (e.g., mesophilic or thermophilic). Only a few reports on pilot- and full-scale studies were found. These evaluate general process

  11. Modelling the adoption of industrial cogeneration in Japan using manufacturing plant survey data

    International Nuclear Information System (INIS)

    Bonilla, David; Akisawa, Atsushi; Kashiwagi, Takao

    2003-01-01

    Electric power deregulation in Japan opens opportunity for further penetration of on-site generation (cogeneration) otherwise known as distributed generation. In the paper the authors present a survey on Japanese industrial plants to fill existing gaps for the assessment of modern cogeneration (combined heat and power, CHP). The objective of the paper is to empirically examine CHP systems based on cross-sectional binary models; second to review diffusion trends of CHP by system vintage during the 1980-2000 period in the manufacturing sector. The econometric results point that the probabilities of embracing this technology increase, in declining importance, with on-site power consumption, and steam demand, operational hours as well as with payback period, purchased power. For example the survey shows that the CHP is used for the purpose of exporting power rather than meeting the plant's own consumption. Some of our results are in line with those of Dismukes and Kleit (Resource Energy Econ. 21 (1999) 153) as well with Rose and Macdonald (Energy J. 12(12) (1991) 47). We also find that a unit increase in satisfaction with CHP will lead to a 54% in CHP capacity. We find significant evidence on the cost effectiveness of CHP under conservative assumptions. Regarding the influence of satisfaction and performance indicators for the several plants, the survey threw some unexpected evidence on the nature of CHP

  12. Restaurant industry preparedness against intentional food contamination: results of a South Carolina survey.

    Science.gov (United States)

    Xirasagar, Sudha; Kanwat, C P; Smith, Lillian U; Li, Yi-Jhen; Sros, Lekhena; Shewchuk, Richard M

    2010-01-01

    Food safety and food defense are both responsibilities of public health agencies. Food safety practices within restaurants are regulated by state and local public health laws based on the US Food and Drug Administration Model Food Code. However, little is known about preemptive practices against intentional food-borne outbreaks within restaurants. The researchers administered a survey to a 50 percent random sample of South Carolina's restaurants, a state that relies heavily on tourism and the restaurant industry for its economic well-being. The survey received a response rate of 15 percent. The food defense practice items fall under three functional categories: employee management and training practices; vendor and delivery-related practices; and physical facilities and operational security practices. This study presents the results, classified by geographic region. Findings indicate some key areas of vulnerability that need attention to protect the public from mass food outbreaks due to intentional contamination. Of concern, there is much variation in practices by geographic region. On the basis of the survey, recommendations are made to improve restaurant preparedness against food-borne outbreaks from terrorism and malevolent contamination.

  13. Toxicity of crude oil products and detergent on serum alkaline ...

    African Journals Online (AJOL)

    The comparative effect of exposing Clarias gariepinus juveniles (100.20 + 0.8g) to diferent concentrations of crude oil products and detergent were studied. Bonny Light Crude oil (BLCO), Premium motor spirit (PMS), Dual purpose kerosene (DPK) and Ariel Enzymax Detergent (AED) were respectively applied at three ...

  14. A comparison of the influence of catholyte vs phosphate detergent ...

    African Journals Online (AJOL)

    The electro-chemical activation of aqueous media is a relatively new technology. The alkaline part of the activated media (catholyte) has outstanding detergency properties. Catholyte provides an environmentally friendly alternative to conventional phosphate based detergents. Little is, however, known about the effect of ...

  15. Contrast variation SANS experiments to the study of detergent ...

    Indian Academy of Sciences (India)

    PEO-PPO-PEO triblock copolymer P85 [(EO)26 (PO)39 (EO)26] dissolves as unimers and detergent sodium dodecyl sulfate (SDS) forms micelles in aqueous solution at 20°C. The mixing of detergent with triblock copolymer induces the micellization of triblock copolymers. Contrast variation small-angle neutron scattering ...

  16. Survey datasets on women participation in green jobs in the construction industry

    Directory of Open Access Journals (Sweden)

    Adedeji O. Afolabi

    2018-04-01

    Full Text Available The unique qualities of women can make them bearers of solutions towards achieving sustainability and dealing with the dangers attributed to climate change. The attitudinal study utilized a questionnaire instrument to obtain perception of female construction professionals. By using a well-structured questionnaire, data was obtained on women participating in green jobs in the construction Industry. Descriptive statistics is performed on the collected data and presented in tables and mean scores (MS. In addition, inferential statistics of categorical regression was performed on the data to determine the level of influence (beta factor the identified barriers had on the level of participation in green jobs. Barriers and the socio-economic benefits which can guide policies and actions on attracting, retaining and exploring the capabilities of women in green jobs can be obtained from the survey data when analyzed.

  17. Estimating Power Outage Cost based on a Survey for Industrial Customers

    Science.gov (United States)

    Yoshida, Yoshikuni; Matsuhashi, Ryuji

    A survey was conducted on power outage cost for industrial customers. 5139 factories, which are designated energy management factories in Japan, answered their power consumption and the loss of production value due to the power outage in an hour in summer weekday. The median of unit cost of power outage of whole sectors is estimated as 672 yen/kWh. The sector of services for amusement and hobbies and the sector of manufacture of information and communication electronics equipment relatively have higher unit cost of power outage. Direct damage cost from power outage in whole sectors reaches 77 billion yen. Then utilizing input-output analysis, we estimated indirect damage cost that is caused by the repercussion of production halt. Indirect damage cost in whole sectors reaches 91 billion yen. The sector of wholesale and retail trade has the largest direct damage cost. The sector of manufacture of transportation equipment has the largest indirect damage cost.

  18. A survey of citizen's attitude to disposal sites of industrial waste and radioactive waste

    International Nuclear Information System (INIS)

    Ishizaka, Kaoru; Tanaka, Masaru; Tokizawa, Takayuki; Sato, Kazuhiko; Koga, Osamu

    2008-01-01

    This study aimed to investigate a risk perception about landfill sits for industrial waste or radioactive waste through the questionnaire survey. As a result, it was shown that most of people worried about health and environmental impact of radioactive waste; and moreover, high ratios of the peoples felt dangerous and scary sensuously. Public trust to the central government was very low. Over 60 percent of people do not trust that countermeasures will be taken at the times of accident' and nearly 70 percent of people do not trust that 'the information about the accident is disclosed'. Answers to questions concerning about public trust regarding countermeasures at the accident, information disclosure at the accident, environmental standard, and environmental technology show significant correlation with risk perception of landfill sites. (author)

  19. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  20. Risk factors in equine transport-related health problems: A survey of the Australian equine industry.

    Science.gov (United States)

    Padalino, B; Raidal, S L; Hall, E; Knight, P; Celi, P; Jeffcott, L; Muscatello, G

    2017-07-01

    Transportation can affect equine health and is a potential source of economic loss to the industry. To identify journey (duration, vehicle, commercial or noncommercial) and horse (sex, age, breed, use, amateur or professional status) characteristics associated with the development of transport-related health problems in horses. Cross-sectional online survey. An online survey was conducted targeting amateur and professional participants in the Australian equine industry; eligible respondents were required to organise horse movements at least monthly. Respondents provided details of the last case of a transport-related health problem that had affected their horse(s). Associations between type of health problem, journey and horse characteristics were examined with multivariable multinomial regression analysis. Based on 214 responses, health problems were classified as injuries, muscular problems, heat stroke, gastrointestinal and respiratory problems, and death or euthanasia. Respiratory problems were reported most frequently (33.7%), followed by gastrointestinal problems (23.8%) and traumatic injuries (16.3%). The type of health problem was associated with journey duration (Pproblems, and death or euthanasia) were more likely to occur on long journeys. Using Standardbreds as the reference group, Thoroughbreds, Arabians and Warmbloods were more likely to experience a severe illness than an injury. Self-selected participation in the study and the self-reported nature of transport-related problems. Horses undertaking journeys of longer than 24 h are at greater risk for the development of severe disease or death. Further studies on long-haul transportation effects are required to safeguard the welfare of horses moved over long distances. © 2016 EVJ Ltd.

  1. Nanoparticle usage and protection measures in the manufacturing industry--a representative survey.

    Science.gov (United States)

    Schmid, Kaspar; Danuser, Brigitta; Riediker, Michael

    2010-04-01

    Addressing the risks of nanoparticles requires knowledge about release into the environment and occupational exposure. However, such information currently is not systematically collected; therefore, this risk assessment lacks quantitative data. The goal was to evaluate the current level of nanoparticle usage in Swiss industry as well as health, safety, and environmental measures, and the number of potentially exposed workers. A representative, stratified mail survey was conducted among 1626 clients of the Swiss National Accident Insurance Fund (SUVA), which insures 80,000 manufacturing firms, representing 84% of all Swiss manufacturing companies (947 companies answered the survey for a 58.3% response rate). The extrapolation to all Swiss manufacturing companies results in 1309 workers (95% confidence interval [CI]: 1073 to 1545) potentially exposed to nanoparticles in 586 companies (95% CI: 145 to 1027). This corresponds to 0.08% of workers (95% CI: 0.06% to 0.09%) and to 0.6% of companies (95% CI: 0.2% to 1.1%). The industrial chemistry sector showed the highest percentage of companies using nanoparticles (21.2%). Other important sectors also reported nanoparticles. Personal protection equipment was the predominant protection strategy. Only a few applied specific environmental protection measures. This is the first nationwide representative study on nanoparticle use in the manufacturing sector. The information gained can be used for quantitative risk assessment. It can also help policymakers design strategies to support companies developing a safer use of nanomaterial. Noting the current low use of nanoparticles, there is still time to proactively introduce protective methods. If the predicted "nano-revolution" comes true, now is the time to take action.

  2. A survey on how different factors impact entrepreneurs' success in food industry

    Directory of Open Access Journals (Sweden)

    Ghahraman Abdoli

    2012-10-01

    Full Text Available In this paper, we present an empirical study to detect important factors influencing the success of entrepreneurs who were active in food industry in Tehran, Iran. The proposed study selects a sample of 174 people out of 318 entrepreneurs who were involved in this industry and distributed a questionnaire, which consists of two groups of questions among them. The first group of questions is associated with personal characteristics of the survey people and the second group of questions are related to different financial, infrastructure and supply chain management categories. The study defines entrepreneurs' mental desirability of success in terms of 15 different questions and asks them to provide their insights in terms of five Likert based responses. The results of questions are analyzed using Pearson correlation test and the preliminary results indicate that, among personal characteristics, education and age play important roles on the success of a business plan. The other observation is that the easier entrepreneurs can get loans and financial support, the higher abilities to absorb new customers and the higher chance of success for absorbing new financial resources. Distributions of sales, compared with competing products as well as distribution of after sales service for customers are negatively associated with infrastructures. The rate of success in using new technologies and supply chain management are correlated, which means the better supply chain, the better achievement to information technology.

  3. FY2000 survey report research and development internationalization in industrial sector among APEC economies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A survey is conducted and a database is constructed on internationalization of research and development activities in the industrial sectors of APEC (Asia-Pacific Economic Cooperation Conference) countries, namely, on research and development support systems, research and development appropriations, research and development personnel, research VISA granting procedures and control over foreign funds, trends of research and development among private sector businesses, main research and development organizations, evaluation by private sector businesses of the research and development environments of their countries, and the like. Incorporated into the database are Australia, Brunei, Canada, Chile, China, Hong Kong, Indonesia, Japan, Korea, Malaysia, Mexico, New Zealand, Papua New Guinea, Peru, Philippines, Russia, Singapore, Chinese Taipei, Thailand, United States, and Vietnam. The database, compiled for Internet web pages, CD-ROMs, and publications, covers the industrial technology related policies of all the countries and helps understand the research and development systems, and enables access to main research organizations. The database comprises a general section dealing with the background, system constitution, and internationalization trend and a countries section collecting information on the respective countries. (NEDO)

  4. The Impact of Ethical Climate on Emotional Organizational Commitment: A Survey in the Accommodation Industry

    Directory of Open Access Journals (Sweden)

    Melike Gül

    2017-12-01

    Full Text Available Organizational commitment is crucial in the service-oriented hospitality industry. A service-oriented firm may achieve high quality service standards and customer satisfaction by employing qualified occupations. Employing qualified staff requires motivation and emotional organizational commitment. In addition, having a positive working ethical climate in the firm is crucial for profitability and productivity. Thus, hospitality businesses can achieve industrial competitiveness. The aim of the study is to determine the effect of the ethical climate on the emotional organizational commitment in the accommodation enterprises. The study addresses ethical climate scale developed by Victor and Cullen (1993 and emotional organizational commitment sub-scale developed by Meyer and Allen (1991. The survey data were obtained from a total of 340 participants who employ at six different 5-star hotels operating in Antalya. The first part of the questionnaire covers questions that determine the relationship between employees' organizational ethical climate perceptions and emotional organizational commitment. In the second part, there are questions asked to determine the demographic characteristics of the participants. The ongoing analyzes will be tested by structural equation modelling. Research result will be show positive relationships between positive ethical climate and emotional organizational commitment in accommodation enterprises. In addition, the study examines whether the emotional organizational commitment levels of employees differ or not according to sex, marital status, age, income level, education, study period and departments.

  5. [Nursing and industry relations: literature review and conflicts of interest survey].

    Science.gov (United States)

    Nordhausen, Thomas; Lins, Sabine; Panfil, Eva-Maria; Köpke, Sascha; Leino-Kilpi, Helena; Langer, Gero; Meyer, Gabriele

    2015-01-01

    Advanced competencies and tasks of nurses go along with an increasing interest of pharmaceutical companies and manufacturers in nurses as a marketing target. To identify nurses' attitudes, perceptions and behavior regarding industry and marketing strategies. 1) Systematic literature search in Medline via PubMed and CINAHL for international studies on nurses' conflict of interests towards pharmaceutical companies; 2) analysis of a survey with PhD students from two Nursing Science doctoral programs. The review including 16 publications published between 1999 and 2014 and the survey among 82 PhD students revealed comparable results. The majority of nurses already had contact with pharmaceutical companies. Nurses are often uncritical in their attitudes, and suggestibility is claimed to be low. The majority of nurses were not - or at least not sufficiently - provided with conflict of interest training, neither as part of their vocational training nor their continuing education. Conflict of interest seems to be an important topic for nurses. Increasing relevance in the future underpins the need for making nurses more sensitive towards this issue, especially through professional training programs. Copyright © 2015. Published by Elsevier GmbH.

  6. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of industrial technologies in Japan that have contributed largely to development of industries; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Surveys and researches have been performed to serve as reference for the future research and development policies by clarifying the innovation process of industrial technologies in Japan and the originality and creativity seen in that process. The surveys have focused on processes born in Japan and evaluated as 'world class' in significance of some kind, and summarized the technology history. The current fiscal year has surveyed newly the following nine processes: industrialization of the sodium glutamate and fructose manufacturing technologies, development of solar cell technologies, industrialization of the manufacturing process of cyclohexnol via cyclohexene, development of the MEK manufacturing process, development and industrialization of hollow fiber reverse osmosis membrane modules for single stage sea water desalination, development and industrialization of the new vitamin B1 intermediate process, development of HSG-Si capacitors for semiconductor memories, and development and industrialization of 4-ethylene fluoride/ethylene copolymer (ETFE). The surveys are considered to have obtained the results abound in suggestions toward original and creative technological developments. (NEDO)

  7. Food surveys for assessing chemical and dosimetric impacts near industrial sites

    International Nuclear Information System (INIS)

    Parache, V.; Maurau, S.; Mercat, C.

    2011-01-01

    Estimating the ingestion of potentially contaminated foodstuffs around conventional and nuclear industrial sites requires data about the food practices and eating habits of the local residents, especially the consumption of locally- and home-produced food. The IRSN thus chose to conduct surveys about these practices in the vicinity of nuclear sites. Their methodology was based on previous surveys near nuclear sites. In 2004, in partnership with AREVA and BEGEAT, the French Institute for Radioprotection and Nuclear Safety studied the eating habits of the residents of Bollene, near the Tricastin plant (Rhone Valley), with the aim of improving the quantification of the plant's potential health impacts. Based on these studies and as part of the SENSIB project to characterize vulnerability to nuclear risks, we developed and tested a survey protocol during the summer 2008, around the Chinon nuclear plant, in collaboration with EDF. The protocol is currently being tested around the Marcoule nuclear plant, in collaboration with the CEA. The aim was to optimize the feasibility and the reproducibility of the approach, while losing none of the robustness of the results. The data obtained made it possible to evaluate daily food intake values for individuals and to assess the rates of consumption of locally-grown products for many food categories. The data showed the existence of local population groups with very high rates of locally-grown food consumption - over 90 % of certain food products. This comparative study thus shows the significant variability of eating habits in the French population and proposes a reproducible approach to evaluating realistic indicators of potentially risky dietary habits. (authors)

  8. Reconnaissance geochemical survey for uranium and related industrial minerals in Cebu Island

    International Nuclear Information System (INIS)

    Reyes, R.Y.; Ramos, A.F.; Magsambol, W.N.; Hernandez, E.

    1989-03-01

    Consistent with the program of evaluating the nuclear mineral resource potential and related industrial minerals of the Philippines, a reconnaissance geochemical survey was conducted in Cebu with considerable success. The total area covered by the survey was about 5,088 sq. kms. The survey consisted of systematic collection of 857 geochemical stream and water and heavy mineral samples, and measurement of radioactivity in over 352 stations. The average sampling density was about one set of samples per 15 to 30 sq. kms. All solid samples were analyzed for U, Cu, Pb, Zn, Mn, Ag, Co and Ni. Uranium, radon and conductivity were measured on most water samples collected. A total of 4,518 elemental determinations were involved. All field and analytical data were treated by statistics, and the computed parameters data were correlated with the geology of the area to establish anomalous zones. Four areas were delineated for possible uranium mineralization. Of the areas, the Mandaue river area is the most interesting for uranium. The contact zone between the diorite and the sedimentary rocks in this area appears to be a favorable geological environment for uranium mineralization. The other anomalous uranium values were found to be related with the guano and phosphate deposits. Uranium was also shown to be independent of the other seven elements in the geologic environment of Cebu. No definite elemental association could be established at present. This study also marks the thorough utilization of Q'GAS, Cadplot and Autocad, all microcomputer-based programs/systems, in the evaluation and interpretation of exploration-oriented geochemical and geological data, and with more significance in the sense that computer generated quality geochemical maps were produced, a first in the country. (Author). Appendices (23); 23 figs; 13 refs.; 4 tabs

  9. Investigation of the mechanism of formation of overbased detergents

    International Nuclear Information System (INIS)

    Courtois, Jean-Philippe

    2002-01-01

    This thesis describes an experimental study of calixarate overbased detergent oil additives, used to neutralise acidic by-products of engine combustion. Aspects of interest in this study include experimental synthesis of calixarenes and overbased detergents, physical and structural characterisation and monitoring of the synthesis process. Two types of calixarenes were prepared (6 and 8 phenolic units). A synthesis procedure of the calixarate overbased detergent was set up, based on adaptation of existing procedures used for other classes of overbased detergents. The procedure was also modified to suit a lab-scale. 13 C NMR and UV-Vis spectroscopy have provided strong evidence for a precursor of the overbased detergent. The ionisation of the surfactants (stearic acid carboxylic group, and phenolic units) was clearly established. The synthesis process was monitored at the molecular and macroscopic level. The use of 13 C-labelled compounds enabled a semi-quantitative study of the concentration evolution of each chemical during the synthesis. Langmuir- trough measurements and dynamic light scattering showed a decrease of particle size during the synthesis of the overbased detergent. The final calixarate overbased detergent was then fully characterised by these two methods. Based on the various information gathered (starting and final material characterisation, monitoring of the process), a mechanism was suggested. This involved a progressive solvation of calcium hydroxide, and breakdown of mixed calcium hydroxide and calcium carbonate. (author)

  10. Solubilization of human erythrocyte membranes by ASB detergents

    Directory of Open Access Journals (Sweden)

    C.C. Domingues

    2008-09-01

    Full Text Available Understanding the membrane solubilization process and finding effective solubilizing agents are crucial challenges in biochemical research. Here we report results on the interaction of the novel linear alkylamido propyl dimethyl amino propanosulfonate detergents, ASB-14 and ASB-16, with human erythrocyte membranes. An estimation of the critical micelle concentration of these zwitterionic detergents (ASB-14 = 100 µM and ASB-16 = 10 µM was obtained using electron paramagnetic resonance. The amount of proteins and cholesterol solubilized from erythrocytes by these detergents was then determined. The hemolytic activities of the ASB detergents were assayed and the detergent/lipid molar ratios for the onset of hemolysis (Re sat and total lysis (Re sol were calculated, allowing the determination of the membrane binding constants (Kb. ASB-14 presented lower membrane affinity (Kb = 7050 M-1 than ASB-16 (Kb = 15610 M-1. The amount of proteins and cholesterol solubilized by both ASB detergents was higher while Re sat values (0.22 and 0.08 detergent/lipid for ASB-14 and ASB-16, respectively were smaller than those observed with the classic detergents CHAPS and Triton X-100. These results reveal that, besides their well-known use as membrane protein solubilizers to enhance the resolution of two dimensional electrophoresis/mass spectrometry, ASB-14 and ASB-16 are strong hemolytic agents. We propose that the physicochemical properties of ASB detergents determine their membrane disruption efficiency and can help to explain the improvement in the solubilization of membrane proteins, as reported in the literature.

  11. Infrastructure improvement project for rationalization of international energy use. Survey project on energy conservation in chief industries in ASEAN countries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With objectives to understand ASEAN countries for their current situation in energy consumption in the typical factories and businesses in their chief industries, prepare appropriate advices on energy saving methods, and establish energy inspection means, surveys were carried out working with experts in the ASEAN countries. In the workshop held in Singapore in November 2000, the textile factory, Arab-Malaysia Development Berhad was selected for Malaysia, on which the survey was performed from January 15 through 19, 2001. Energy saving proposals were submitted based on the survey results. For Indonesia, the paper and pulp mill, P.T. Kertas Leces (Persoro) Pulp Paper Mill was selected, on which the survey was performed from January 22 through 26, 2001. Based on the survey results, the energy saving means and their effects, necessary investment amount, and amortization period were prepared. For Brunei, the cement factory, Butra Djajanti Cement SDN BHD was surveyed, whereas improvements of the facilities were proposed. (NEDO)

  12. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  13. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  14. Evaluation of a novel thermo-alkaline Staphylococcus aureus lipase for application in detergent formulations

    Directory of Open Access Journals (Sweden)

    Abir Ben Bacha

    2018-03-01

    Full Text Available An extracellular lipase of a newly isolated S. aureus strain ALA1 (SAL4 was purified from the optimized culture medium. The SAL4 specific activity determined at 60 °C and pH 12 by using olive oil emulsion or TC4, reached 7215 U/mg and 2484 U/mg, respectively. The 38 NH2-terminal amino acid sequence of the purified enzyme starting with two extra amino acid residues (LK was similar to known staphylococcal lipase sequences. This novel lipase maintained almost 100% and 75% of its full activity in a pH range of 4.0–12 after a 24 h incubation or after 0.5 h treatment at 70 °C, respectively. Interestingly, SAL4 displayed appreciable stability toward oxidizing agents, anionic and non-ionic surfactants in addition to its compatibility with several commercial detergents. Overall, these interesting characteristics make this new lipase promising for its application in detergent industry. Keywords: Staphylococcus aureus lipase, Purification, Characterization, Thermo-alkaline, Detergent-stable

  15. Degradation of cytotoxic agent in soap and detergent wastewater by advanced oxidation processes

    International Nuclear Information System (INIS)

    Iqbal, M.; Bhatti, I.A.; Nisar, J.

    2017-01-01

    Wastewater from soap and detergent industries is a source of high pollution and contamination for water sheds. In present investigation, cytotoxic profiling was documented from Faisalabad, Sargodha and Gujranwala cities, Pakistan, followed by advanced oxidation processes (AOPs) treatments (UV and gamma radiation). The cytotoxicity was evaluated by Allium cepa, haemolytic and brine shrimp bioassays. Independent variables such as gamma radiation absorbed dose, H2O2, TiO2 concentrations, reaction time, pH and shaking speed were optimized using statistical techniques. The raw soap and detergent wastewater showed cytotoxicity up to high extent. At optimized conditions, > 94% degradation was achieved both in case of UV (exposure time 100 min, TiO2 concentration 5.93 g/L, H2O2 4.39%, pH 6.50 and shaking speed 110 rpm) and gamma radiation (12.69 kGy absorbed dose in the presence of 4.65% H2O2) treated samples and water quality parameters (WQP) also improved significantly. The cytotoxicity reduced sharply as a result of AOPs treatment at optimized conditions. From the results, it is evident that AOPs under investigation could be used for the degradation and cytotoxicity reduction of soap and detergent wastewater. (author)

  16. A survey of healthcare industry representatives' participation in surgery: some new ethical concerns.

    Science.gov (United States)

    Bedard, Jeffrey; Moore, Crystal Dea; Shelton, Wayne

    2014-01-01

    To provide preliminary evidence of the types and amount of involvement by healthcare industry representatives (HCIRs) in surgery, as well as the ethical concerns of those representatives. A link to an anonymous, web-based survey was posted on several medical device boards of the website http://www. cafepharma.com. Additionally, members of two different medical device groups on LinkedIn were asked to participate. Respondents were self-identified HCIRs in the fields of orthopedics, cardiology, endoscopic devices, lasers, general surgery, ophthalmic surgery, oral surgery, anesthesia products, and urologic surgery. A total of 43 HCIRs replied to the survey over a period of one year: 35 men and eight women. Respondents reported attending an average of 184 surgeries in the prior year and had an average of 17 years as an HCIR and six years with their current employer. Of the respondents, 21 percent (nine of 43) had direct physical contact with a surgical team or patient during a surgery, and 88 percent (38 of 43) provided verbal instruction to a surgical team during a surgery. Additionally, 37 percent (16 of 43) had participated in a surgery in which they felt that their involvement was excessive, and 40 percent (17 of 43) had attended a surgery in which they questioned the competence of the surgeon. HCIRs play a significant role in surgery. Involvement that exceeds their defined role, however, can raise serious ethical and legal questions for surgeons and surgical teams. Surgical teams may at times be substituting the knowledge of the HCIR for their own competence with a medical device or instrument. In some cases, contact with the surgical team or patient may violate the guidelines not only of hospitals and medical device companies, but the law as well. Further study is required to determine if the patients involved have any knowledge or understanding of the role that an HCIR played in their surgery. Copyright 2014 The Journal of Clinical Ethics. All rights reserved.

  17. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  18. Biodegradation of detergents by aquatic bacterial flora from Otamiri ...

    African Journals Online (AJOL)

    SERVER

    2008-03-18

    Mar 18, 2008 ... Full Length Research Paper. Biodegradation of detergents by ... releases toxins and decreases oxygen in waterways and decrease in the breeding ... of chemicals to microbial degradation and simulation test, which provide ...

  19. Influence of detergents on water drift in cooling towers

    Science.gov (United States)

    Vitkovicova, Rut

    An influence of detergents on the water drift from the cooling tower was experimentally investigated. For this experimental measurements was used a model cooling tower, especially an experimental aerodynamic line, which is specially designed for the measurement and monitoring of processes taking place around the eliminators of the liquid phase. The effect of different concentrations of detergent in the cooling water on the drift of water droplets from a commonly used type eliminator was observed with visualization methods.

  20. Influence of detergents on water drift in cooling towers

    Directory of Open Access Journals (Sweden)

    Vitkovicova Rut

    2017-01-01

    Full Text Available An influence of detergents on the water drift from the cooling tower was experimentally investigated. For this experimental measurements was used a model cooling tower, especially an experimental aerodynamic line, which is specially designed for the measurement and monitoring of processes taking place around the eliminators of the liquid phase. The effect of different concentrations of detergent in the cooling water on the drift of water droplets from a commonly used type eliminator was observed with visualization methods.

  1. Occupational injury proneness in Indian women: A survey in fish processing industries

    Directory of Open Access Journals (Sweden)

    Saha Asim

    2006-09-01

    Full Text Available Abstract A cross sectional survey was initiated to understand the frequency of occupational injury occurrence and the associated factors in the fish processing industries of western India involving 185 randomly selected women subjects. All the subjects were interviewed with the help of an interviewer-administered questionnaire to collect information regarding their personal, occupational and work related morbidity details (including details of occupational injuries. Logistic regression method was used to analyze the data in order to obtain the contribution of individual factors on occupational injuries. This study has shown that work related morbidity like blanching of hand (OR; 2.30, 95%CI; 1.12–4.74 and nature of job like grading (OR; 3.99, 95%CI; 1.41–11.27 and packing (OR; 5.68, 95%CI; 1.65–19.57 had a significant impact on injury causation. This study eventually concludes that apart from nature of job of fish processing workers occupational hazards prevailing in the work environment contribute significantly to the occurrence of work related injuries and prevention of such occupational hazards may help in protecting workers from occupational injuries also.

  2. Gender Equality in Labor Markets: A Survey About the Industry and Service Sectors in Gaziantep

    Directory of Open Access Journals (Sweden)

    Berna Balcı İzgi

    2011-12-01

    Full Text Available This paper presents the findings of a survey on women labor issues in two different sectors –industry and service sectors- in Gaziantep. The main aim is to modify the structure of women labor in Gaziantep. The main characteristics of women labour market for Gaziantep is that women labor participation is sharply decreased after marriage which is a traditional issue. Inaddition entrepreneurship is very high. Besides working years with insurance is quite low in all levels of education. The promotions system do not change with education. Education is a crucial variable in the analysis. For instance, the positions are not assigned according to the education in most of the times. This creates inefficiency in labor markets. Another important finding that the rate of entrepreneurship is very high related with other cities of Turkey. The topics of wages, working hours, the comparison of the appropriateness of the work according to education, cultural activities, satisfaction, pleasure from working have been considered from the aspect of the relationship between the working life and family life and besides, finance deficiency in entrepreneurship, and sex discrimination not clear are the main problems in different ratios. The work and the education were not found as related. The level of social coverage, trade union membership and salaried work does change with education positively

  3. Report of fact-finding survey for atomic energy industry, fiscal year 1994

    International Nuclear Information System (INIS)

    1996-01-01

    In fiscal year 1994, the economy in Japan progressed in the state of gradual restoration of business condition, and the real economical growth rate turned to 0.5% plus. The total supply of primary energy increased by 5.4% as compared with the last year. Nuclear power took 11.3% of total energy supply, which is the highest so far. The share of nuclear power generation in total generated electric power became 31.3%. The nuclear power stations that started operation were two plants, and as of the end of the fiscal year, 48 nuclear power plants with the installed capacity of 40.37 million kW were in operation. Five plants of 4997 MW were under construction. The long term plan on the research, development and utilization of atomic energy was shown as the plan up to 2010. The outlay related to nuclear power of electric power business increased by 7% as compared with the last year, but the sales related to atomic energy of mining and manufacturing industries decreased by 12%. The market of nuclear reactor materials becomes smaller, and maintenance, service and fuel cycle fields show growth, in this way, the structural change is advancing. The results of survey are reported. (K.I.)

  4. A survey on impact of emotional intelligence, organizational citizenship behaviors and job satisfaction on employees’ performance in Iranian hotel industry

    Directory of Open Access Journals (Sweden)

    Kambiz Heidarzadeh Hanzaee

    2013-05-01

    Full Text Available The objective of this study is to investigate the effect of employees’ Emotional Intelligence (EI, Job Satisfaction (JS and Organizational Citizenship Behavior (OCB on Employee's Performance (EP in Iranian hotel industry. The proposed study of this paper designs a questionnaire and distributes it among 225 employees who have a high interaction with customers in hotel industry. In order to describe the data, the frequency distribution tables have been used and the structural equations model (SEM has been used to describe the data. The results of this survey have confirmed all the proposed hypotheses of this survey except the one, which was associated with the relationship between OCB on EP. Therefore, EI have positive impacts on JS, OCB and EP in Iranian hotel industry. Conclusion and Managerial implications have been offers.

  5. Effects of wastewater sludge and its detergents on the stability of rotavirus

    Energy Technology Data Exchange (ETDEWEB)

    Ward, R.L. (Sandia Labs., Albuquerque, NM); Ashley, C.S.

    1980-06-01

    Wastewater sludge reduced the heat required to inactivate rotavirus SA-11, and ionic detergents were identified as the sludge components responsible for this effect. A similar result was found previously with reovirus. The quantitative effects of individual ionic detergents on rotavirus and reovirus were very different, and rotavirus was found to be extremely sensitive to several of these detergents. However, neither virus was destabilized by nonionic detergents. On the contrary, rotavirus was stabilized by a nonionic detergent against the potent destabilizing effects of the ionic detergent sodium dodecyl sulfate. The destabilizing effects of both cationic and anionic detergents on rotavirus were greatly altered by changes in the pH of the medium.

  6. EFFECT OF DETERGENT ON ELECTRICAL PROPERTIES OF SQUID AXON MEMBRANE.

    Science.gov (United States)

    KISHIMOTO, U; ADELMAN, W J

    1964-05-01

    The effects of detergents on squid giant axon action and resting potentials as well as membrane conductances in the voltage clamp have been studied. Anionic detergents (sodium lauryl sulfate, 0.1 to 1.0 mM; dimethyl benzene sulfonate, 1 to 20 mM, pH 7.6) cause a temporary increase and a later decrease of action potential height and the value of the resting potential. Cationic detergent (cetyl trimethyl ammonium chloride, 6 x 10(-5)M or more, pH 7.6) generally brings about immediate and irreversible decreases in the action and resting potentials. Non-ionic detergent (tween 80, 0.1 M, pH 7.6) causes a slight reversible reduction of action potential height without affecting the value of the resting potential. Both anionic and cationic detergents generally decrease the sodium and potassium conductances irreversibly. The effect of non-ionic detergent is to decrease the sodium conductance reversibly, leaving the potassium conductance almost unchanged.

  7. Awareness and enforcement of guidelines for publishing industry-sponsored medical research among publication professionals: the Global Publication Survey.

    Science.gov (United States)

    Wager, Elizabeth; Woolley, Karen; Adshead, Viv; Cairns, Angela; Fullam, Josh; Gonzalez, John; Grant, Tom; Tortell, Stephanie

    2014-04-19

    To gather information about current practices and implementation of publication guidelines among publication professionals working in or for the pharmaceutical industry. Web-based survey publicised via email and social media to members of the International Society for Medical Publication Professionals (ISMPP) and other organisations from November 2012 to February 2013. 469 individuals involved in publishing industry-sponsored research in peer-reviewed journals, mainly working in pharmaceutical or device companies ('industry', n=144), communication agencies ('agency', n=238), contract research organisations (CRO, n=15) or as freelancers (n=34). Most respondents (78%) had worked on medical publications for ≥5 years and 62% had a PhD/MD. Over 90% of industry, agency and CRO respondents routinely refer to Good Publication Practice (GPP2) and the International Committee of Medical Journal Editors' Uniform Requirements. Most respondents (78% industry, 79% agency) received mandatory training on ethical publication practices. Over 90% of respondents' companies had publication guidelines or policies and required medical writing support to be acknowledged in publications (96% industry, 99% agency). Many industry respondents used publication management tools to monitor compliance with company guidelines and about half (46%) stated that their company had formal publication audits. Fewer agencies audited adherence to guidelines but 20% of agency respondents reported audits of employees and 6% audits of freelancers. Of concern, 37% of agency respondents reported requests from authors or sponsors that they believed were unethical, although 93% of these requests were withdrawn after respondents explained the need for compliance with guidelines. Most respondents' departments (63% industry, 58% agency, 60% CRO) had been involved in publishing studies with negative or inconclusive results. Within this sample, most publication professionals working in or for industry were aware of

  8. 5 CFR 532.213 - Industries included in regular appropriated fund wage surveys.

    Science.gov (United States)

    2010-01-01

    ... food service and laundry establishments and industries having peculiar employment conditions that... CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Prevailing Rate Determinations § 532.213 Industries... transportation except taxi and limousine service (NAICS 4853). 487 (except 4872) Scenic and sightseeing...

  9. Awareness and enforcement of guidelines for publishing industry-sponsored medical research among publication professionals: the Global Publication Survey

    Science.gov (United States)

    Wager, Elizabeth; Woolley, Karen; Adshead, Viv; Cairns, Angela; Fullam, Josh; Gonzalez, John; Grant, Tom; Tortell, Stephanie

    2014-01-01

    Objective To gather information about current practices and implementation of publication guidelines among publication professionals working in or for the pharmaceutical industry. Design/setting Web-based survey publicised via email and social media to members of the International Society for Medical Publication Professionals (ISMPP) and other organisations from November 2012 to February 2013. Participants 469 individuals involved in publishing industry-sponsored research in peer-reviewed journals, mainly working in pharmaceutical or device companies (‘industry’, n=144), communication agencies (‘agency’, n=238), contract research organisations (CRO, n=15) or as freelancers (n=34). Most respondents (78%) had worked on medical publications for ≥5 years and 62% had a PhD/MD. Results Over 90% of industry, agency and CRO respondents routinely refer to Good Publication Practice (GPP2) and the International Committee of Medical Journal Editors’ Uniform Requirements. Most respondents (78% industry, 79% agency) received mandatory training on ethical publication practices. Over 90% of respondents’ companies had publication guidelines or policies and required medical writing support to be acknowledged in publications (96% industry, 99% agency). Many industry respondents used publication management tools to monitor compliance with company guidelines and about half (46%) stated that their company had formal publication audits. Fewer agencies audited adherence to guidelines but 20% of agency respondents reported audits of employees and 6% audits of freelancers. Of concern, 37% of agency respondents reported requests from authors or sponsors that they believed were unethical, although 93% of these requests were withdrawn after respondents explained the need for compliance with guidelines. Most respondents’ departments (63% industry, 58% agency, 60% CRO) had been involved in publishing studies with negative or inconclusive results. Conclusions Within this sample

  10. A Literature Survey of Information Systems Facilitating the Identification of Industrial Symbiosis

    NARCIS (Netherlands)

    van Capelleveen, Guido Cornelis; Amrit, Chintan Amrit; Yazan, Devrim Murat; Otjacques, Benoit; Hitzelberger, Patrik; Naumann, Stefan; Wohlgemuth, Volker

    2017-01-01

    Industrial Symbiosis (IS) is an emerging business tool that is used by practitioners to engage cooperation among industries to reuse waste streams. The key to reveal IS opportunities for organizations is both connecting the supply and demand of various industries and providing technical knowledge on

  11. An Alkaline Protease from Bacillus pumilus MP 27: Functional Analysis of its Binding Model towards its Applications as Detergent Additive

    Directory of Open Access Journals (Sweden)

    Mehak Baweja

    2016-08-01

    Full Text Available A proteolytic strain of Bacillus pumilus MP 27 was isolated from water samples of Southern ocean produced alkaline protease. Since protease production need expensive ingredients, an economically viable process was developed by using low cost carbon source, wheat straw, supplemented with peptone. This protease was active within temperature ranges 10˚C -70˚C at pH 9. This process was optimized by response surface methodology using a Box Bekhman design by Design Expert 7.0 software that increased the protease activity to 776.5 U/ml. Moreover, the enzyme was extremely stable at a broad range of temperature and pH retaining 69% of its activity at 50 ºC and 70% at pH 11. The enzyme exhibited excellent compatibility with surfactants and commercial detergents, showing 87% stability with triton X-100 and ̴ 100% stability with Tide commercial detergent. The results of the wash performance analysis demonstrated considerably good de-staining at 50ºC and 4ºC with low supplementation (109 U/ml. Molecular modeling of the protease revealed the presence of serine proteases, subtilase family and serine active site and further docking supported the association of catalytic site with the various substrates. Certainly, such protease can be considered as a good detergent additive in detergent industry with a possibility to remove the stains effectively even in a cold wash.

  12. An Alkaline Protease from Bacillus pumilus MP 27: Functional Analysis of Its Binding Model toward Its Applications As Detergent Additive.

    Science.gov (United States)

    Baweja, Mehak; Tiwari, Rameshwar; Singh, Puneet K; Nain, Lata; Shukla, Pratyoosh

    2016-01-01

    A proteolytic strain of Bacillus pumilus MP 27 was isolated from water samples of Southern ocean produced alkaline protease. Since protease production need expensive ingredients, an economically viable process was developed by using low cost carbon source, wheat straw, supplemented with peptone. This protease was active within temperature ranges 10-70°C at pH 9. This process was optimized by response surface methodology using a Box Bekhman design by Design Expert 7.0 software that increased the protease activity to 776.5 U/ml. Moreover, the enzyme was extremely stable at a broad range of temperature and pH retaining 69% of its activity at 50°C and 70% at pH 11. The enzyme exhibited excellent compatibility with surfactants and commercial detergents, showing 87% stability with triton X-100 and 100% stability with Tide commercial detergent. The results of the wash performance analysis demonstrated considerably good de-staining at 50 and 4°C with low supplementation (109 U/ml). Molecular modeling of the protease revealed the presence of serine proteases, subtilase family and serine active site and further docking supported the association of catalytic site with the various substrates. Certainly, such protease can be considered as a good detergent additive in detergent industry with a possibility to remove the stains effectively even in a cold wash.

  13. A survey of environmental and occupational work practices in the automotive refinishing industry of a developing country: Sonora, Mexico.

    Science.gov (United States)

    Velázquez, Luis; Bello, Dhimiter; Munguia, Nora; Zavala, Andrea; Marin, Amina; Moure-Eraso, Rafael

    2008-01-01

    The automotive repair and refinishing industry has been studied intensively in industrialized countries, in part due to use of hazardous chemicals such as isocyanates and solvents, but little is known about industry practices in the developing world. The main objective of this paper was to investigate environmental and occupational work practices of this industry in a developing region, Sonora, Mexico. An integrated survey approach maximizes the opportunity for identifying risks as well as reducing risks. This investigation included detailed workplace visits to 41 body shops and 6 paint suppliers, as well as a survey of shop owners and 24 workers. Information was collected on work practices, level of technology in the shops, use of personal protective equipment, consumption and handling of hazardous chemicals and waste, hazard communication, and environmental consciousness. Most shops had little capital, outdated technology for exposure control, poor working conditions, high potential for exposure to hazardous chemicals, and little awareness of environmental and occupational health and safety. We concluded that work practices in the Sonoran auto refinishing industry are unsustainable and may pose a health risk to workers and the environment.

  14. Foundational Report Series: Advanced Distribution Management Systems for Grid Modernization, DMS Industry Survey

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Ravindra [Argonne National Lab. (ANL), Argonne, IL (United States); Uluski, Robert [Argonne National Lab. (ANL), Argonne, IL (United States); Reilly, James T. [Reilly Associates, Pittston, PA (United States); Martino, Sal [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Lu, Xiaonan [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Jianhui [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-04-01

    The objective of this survey is to benchmark current practices for DMS implementation to serve as a guide for future system implementations. The survey sought information on current plans to implement DMS, DMS functions of interest, implementation challenges, functional benefits achieved, and other relevant information. These survey results were combined (where possible) with results of similar surveys conducted in the previous four years to observe trends over time.

  15. Synthetic detergents: 100 years of history

    Directory of Open Access Journals (Sweden)

    Ana Carolina Kogawa

    2017-09-01

    Full Text Available In the year 2016 the synthetic detergents complete 100 years and in this story they evolved as cleaners. They are already part of the routine of thousands of people worldwide. For a higher power of cleaning of the detergent, today, are added phosphates, the main responsible for environmental problems. After 100 years of synthetic detergents, the effect of the combination of various cleaners on the environment is a gap. Legislation and guidelines about the other components of the formula of cleaners still missing. Even the term biodegradable can be best placed on the diversity of products currently entitled biodegradable. A lot attitudes can still be taken to continuously improve the relationship between the parties involved, animals, plants, waters and men, so that in another 100 years continues to exist this interaction with the environment without destroying it. The marketing used by synthetic detergent companies evolved a lot over the years and showed maturity to deal with changes in theories and strategies for promotion and even with the constant social reform that its consumer lived, accompanying them intelligently to be able to capture their changing needs and desires, and so assemble the best way to connect to them. This paper focuses on the subject synthetic detergents as well as (i types and applications, (ii threats, (iii sustainability, (iv legislation, (v packaging and (vi marketing strategies.

  16. Synthetic detergents: 100 years of history.

    Science.gov (United States)

    Kogawa, Ana Carolina; Cernic, Beatriz Gamberini; do Couto, Leandro Giovanni Domingos; Salgado, Hérida Regina Nunes

    2017-09-01

    In the year 2016 the synthetic detergents complete 100 years and in this story they evolved as cleaners. They are already part of the routine of thousands of people worldwide. For a higher power of cleaning of the detergent, today, are added phosphates, the main responsible for environmental problems. After 100 years of synthetic detergents, the effect of the combination of various cleaners on the environment is a gap. Legislation and guidelines about the other components of the formula of cleaners still missing. Even the term biodegradable can be best placed on the diversity of products currently entitled biodegradable. A lot attitudes can still be taken to continuously improve the relationship between the parties involved, animals, plants, waters and men, so that in another 100 years continues to exist this interaction with the environment without destroying it. The marketing used by synthetic detergent companies evolved a lot over the years and showed maturity to deal with changes in theories and strategies for promotion and even with the constant social reform that its consumer lived, accompanying them intelligently to be able to capture their changing needs and desires, and so assemble the best way to connect to them. This paper focuses on the subject synthetic detergents as well as (i) types and applications, (ii) threats, (iii) sustainability, (iv) legislation, (v) packaging and (vi) marketing strategies.

  17. A survey into process and worker's characteristics in the wood furniture industry in Songkhla Province, southern region of Thailand.

    Science.gov (United States)

    Tuntiseranee, P; Chongsuvivatwong, V

    1998-12-01

    A cross-sectional survey of the wood furniture industry was conducted in southern Thailand in February 1993. The aim was to examine the manufacturing process, occupational hazards at the workplace, workers' demographic characteristics, period of employment, incidence rate of work related injury and some reproductive history of workers. Altogether 69 managers and 1,000 workers participated in the study. There are 2 main types of wood industry, rubberwood and hardwood. The rubberwood industry is semi-automated with advanced technology, has a female-dominated workforce of 200-300 workers per factory and overseas-market orientation. The hardwood industry is based in small-scale workplaces ranging from 20 to 60 workers, domestic-market orientation and has a male-dominated workforce. Most of the workers were young, single, of low education and were high turnover rate laborforce, with arduous work and long working hours per week. Solvent was the most frequent chemical exposure. The person-year incidence of chemical exposure in female workers was higher than in male workers for every group of chemicals. The incidence of accidents was twice as high as the official rate. The standardized fertility ratio of female wood workers was only 51.6% of that of the Thai female population. There was a high abortion rate among women who became pregnant inside the wood industry compared to that among pregnancies outside the wood factory. Wood industry workers were exposed to occupational hazards and accident-prone work conditions.

  18. Estimating and Forecasting Production and Orders in Manufacturing Industry from Business Survey Data: Evidence from Switzerland, 1990-2003

    OpenAIRE

    Richard Etter; Michael Graff

    2003-01-01

    A fundamental issue for policy-oriented business cycle research is access to leading - or at least coincident - and reliable indicators of economic activity in manufacturing industry. Therefore, we analyse how the quickly disposable, qualitative information of the business tendency survey conducted by the Swiss Institute for Business Cycle Research (KOF) is related to the official production and order statistics of Switzerland. Pairs of high cross-correlations were selected for further analys...

  19. Patient Engagement Practices in Clinical Research among Patient Groups, Industry, and Academia in the United States: A Survey.

    Directory of Open Access Journals (Sweden)

    Sophia K Smith

    Full Text Available Patient-centered clinical trial design and execution is becoming increasingly important. No best practice guidelines exist despite a key stakeholder declaration to create more effective engagement models. This study aims to gain a better understanding of attitudes and practices for engaging patient groups so that actionable recommendations may be developed.Individuals from industry, academic institutions, and patient groups were identified through Clinical Trials Transformation Initiative and Drug Information Association rosters and mailing lists. Objectives, practices, and perceived barriers related to engaging patient groups in the planning, conduct, and interpretation of clinical trials were reported in an online survey. Descriptive and inferential statistical analysis of survey data followed a literature review to inform survey questions.Survey respondents (n = 179 valued the importance of involving patient groups in research; however, patient group respondents valued their contributions to research protocol development, funding acquisition, and interpretation of study results more highly than those contributions were valued by industry and academic respondents (all p < .001. Patient group respondents placed higher value in open communications, clear expectations, and detailed contract execution than did non-patient group respondents (all p < .05. Industry and academic respondents more often cited internal bureaucratic processes and reluctance to share information as engagement barriers than did patient group respondents (all p < .01. Patient groups reported that a lack of transparency and understanding of the benefits of collaboration on the part of industry and academia were greater barriers than did non-patient group respondents (all p< .01.Despite reported similarities among approaches to engagement by the three stakeholder groups, key differences exist in perceived barriers and benefits to partnering with patient groups among the

  20. Results of the radiological survey at Allied Bendix Aerospace Corporation, Industrial and Williams Avenues, Teterboro, New Jersey (TJ002)

    International Nuclear Information System (INIS)

    Foley, R.D.; Floyd, L.M.

    1989-02-01

    A radiological survey of the commercial property at Industrial and Williams Avenues, Teterboro, New Jersey, was conducted on November 17--18, 1986. Samples of the soil surface were taken for further analyses during this time. Prior to 1976, Bendix was licensed by the Nuclear Regulatory Commission to use thorium in an on-site Navy/Bendix process. 4 refs., 3 figs., 4 tabs

  1. Workplace health promotion implementation, readiness, and capacity among midsize employers in low-wage industries: a national survey.

    Science.gov (United States)

    Hannon, Peggy A; Garson, Gayle; Harris, Jeffrey R; Hammerback, Kristen; Sopher, Carrie J; Clegg-Thorp, Catherine

    2012-11-01

    To describe workplace health promotion (WHP) implementation, readiness, and capacity among midsize employers in low-wage industries in the United States. A cross-sectional survey of a national sample of midsize employers (100 to 4999 employees) representing five low-wage industries. Employers' WHP implementation for both employees and employees' spouses and partners was low. Readiness scales showed that employers believe WHP would benefit their employees and their companies, but they were less likely to believe that WHP was feasible for their companies. Employers' capacity to implement WHP was very low; nearly half the sample reported no capacity. Midsize employers in low-wage industries implement few WHP programs; their responses to readiness and capacity measures indicate that low capacity may be one of the principal barriers to WHP implementation.

  2. Industrial hygiene survey report of Millstone Nuclear Power Station No. 3 construction site (Northeast Utilities Service Co./Stone and Webster Engineering Corp.) Waterford, Connecticut

    International Nuclear Information System (INIS)

    Zaebst, D.D.; Herrick, R.H.

    1985-11-01

    The purpose of the study was to conduct an in-depth industrial hygiene survey to determine exposures of painters to coating components during the construction of a nuclear power plant. The survey was conducted as part of the Industrywide Studies Branch survey of Health Hazards in the Painting Trades

  3. Local survey of the distribution of industrial melanic forms in the moth Biston betularia and estimates of the selective values of these in an industrial environment

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, C A; Sheppard, P M

    1966-01-01

    A survey has shown that there is a rapid decline in the frequency of the industrial melanic carbonaria of the moth Biston betularia from a value of about 97% in Liverpool to less than 10% 50 miles to the west in North Wales. The decline in the frequency of the intermediate phenotype insularia in this area, controlled by an allelomorph at the same locus, is from about 14% on the Wirral (no reliable frequency is available for Liverpool) to about 4% 30 miles to the west. Experiments using dead moths placed in life-like positions on tree trunks at Caldy and in Liverpool confirmed that carbonaria is better camouflaged on the blackened tree trunks of industrial areas. Estimates of the selective disadvantage of the typical form in Liverpool, using data from the survey and these experiments, together with a variety of assumptions, indicate values of the order of 60%, which is somewhat higher than previous estimates. At Caldy the typical form appears to have been at a disadvantage of about 50% prior to the introduction of the smokeless zones and is now at about a 20% disadvantage, using assumptions similar to those in the Liverpool estimates. Although these estimates are subject to considerable error, there is little doubt that they reflect the correct order of magnitude of the relative selective values. 8 references, 1 figure, 4 tables.

  4. Process for treatment of detergent-containing radioactive liquid wastes

    International Nuclear Information System (INIS)

    Kamiya, K.; Chino, K.; Funabashi, K.; Horiuchi, S.; Motojima, K.

    1984-01-01

    A detergent-containing radioactive liquid waste originating from atomic power plants is concentrated to have about 10 wt. % detergent concentration, then dried in a thin film evaporator, and converted into powder. Powdered activated carbon is added to the radioactive waste in advance to prevent the liquid waste from foaming in the evaporator by the action of surface active agents contained in the detergent. The activated carbon is added in accordance with the COD concentration of the radioactive liquid waste to be treated, and usually at a concentration 2-4 times as large as the COD concentration of the liquid waste to be treated. A powdery product having a moisture content of not more than 15 wt. % is obtained from the evaporator, and pelletized and then packed into drums to be stored for a predetermined period

  5. Intermolecular detergent-membrane protein noes for the characterization of the dynamics of membrane protein-detergent complexes.

    Science.gov (United States)

    Eichmann, Cédric; Orts, Julien; Tzitzilonis, Christos; Vögeli, Beat; Smrt, Sean; Lorieau, Justin; Riek, Roland

    2014-12-11

    The interaction between membrane proteins and lipids or lipid mimetics such as detergents is key for the three-dimensional structure and dynamics of membrane proteins. In NMR-based structural studies of membrane proteins, qualitative analysis of intermolecular nuclear Overhauser enhancements (NOEs) or paramagnetic resonance enhancement are used in general to identify the transmembrane segments of a membrane protein. Here, we employed a quantitative characterization of intermolecular NOEs between (1)H of the detergent and (1)H(N) of (2)H-perdeuterated, (15)N-labeled α-helical membrane protein-detergent complexes following the exact NOE (eNOE) approach. Structural considerations suggest that these intermolecular NOEs should show a helical-wheel-type behavior along a transmembrane helix or a membrane-attached helix within a membrane protein as experimentally demonstrated for the complete influenza hemagglutinin fusion domain HAfp23. The partial absence of such a NOE pattern along the amino acid sequence as shown for a truncated variant of HAfp23 and for the Escherichia coli inner membrane protein YidH indicates the presence of large tertiary structure fluctuations such as an opening between helices or the presence of large rotational dynamics of the helices. Detergent-protein NOEs thus appear to be a straightforward probe for a qualitative characterization of structural and dynamical properties of membrane proteins embedded in detergent micelles.

  6. [Evaluation of the mutagenicity of detergents by tests on bacteria, plant cells and human leucocytes.].

    Science.gov (United States)

    Feretti, Donatella; Pedrazzani, Roberta; Ceretti, Elisabetta; Zerbini, Ilaria; Gozio, Eleonora; Belotti, Caterina; Alias, Carlotta; Donato, Francesco; Gelatti, Umberto

    2009-01-01

    The aim of this study was to evaluate the mutagenicity of several traditional detergents and that of newer more biodegradable detergents, by using a bacterial test (Ames test), a plant cell test (Allium cepa micronuclei test) and a human leucocyte test (Comet test). All tests were conducted using a wide range of doses (1-2000 mg/l). None of the examined detergents induced mutations in S.typhimurium. One traditional detergent showed a genotoxic effect with the A. cepa test, while all newer detergents and one traditional detergent were shown by the Comet test to be capable of inducing DNA damage.

  7. Nonideal mixing in multicomponent lipid/detergent systems

    International Nuclear Information System (INIS)

    Tsamaloukas, Alekos; Szadkowska, Halina; Heerklotz, Heiko

    2006-01-01

    A detailed understanding of the mixing properties of membranes to which detergents are added is mandatory for improving the application and interpretation of detergent based protein or lipid extraction assays. For Triton X-100 (TX-100), a nonionic detergent frequently used in the process of solubilizing and purifying membrane proteins and lipids, we present here a detailed study of the mixing properties of binary and ternary lipid mixtures by means of high-sensitivity isothermal titration calorimetry (ITC). To this end the partitioning thermodynamics of TX-100 molecules from the aqueous phase to lipid bilayers composed of various mixtures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), egg-sphingomyelin (SM), and cholesterol (cho) are characterized. Composition-dependent partition coefficients K are analysed within the frame of a thermodynamic model developed to describe nonideal mixing in multicomponent lipid/detergent systems. The results imply that POPC, fluid SM, and TX-100 mix almost ideally (nonideality parameters ρ α/β SM/cho ≤-6RT) and unfavourable PC/cho interactions (ρ PC/cho = 2RT) may under certain conditions cause POPC/TX-100-enriched domains to segregate from SM/cho-enriched ones. TX-100/cho contacts are unfavourable (ρ cho/TX = 4RT), so the system tends to avoid them. That means, addition of TX-100 promotes the separation of SM/cho-rich from PC/TX-100-rich domains. It appears that cho/detergent interactions are crucial governing the abundance and composition of detergent-resistant membrane patches

  8. Hurdles in tissue engineering/regenerative medicine product commercialization: a pilot survey of governmental funding agencies and the financial industry.

    Science.gov (United States)

    Bertram, Timothy A; Tentoff, Edward; Johnson, Peter C; Tawil, Bill; Van Dyke, Mark; Hellman, Kiki B

    2012-11-01

    The Tissue Engineering and Regenerative Medicine International Society of the Americas (TERMIS-AM) Industry Committee conducted a semiquantitative opinion survey in 2010 to delineate potential hurdles to commercialization perceived by the TERMIS constituency groups that participate in the stream of technology commercialization (academia, start-up companies, development-stage companies, and established companies). A significant hurdle identified consistently by each group was access to capital for advancing potential technologies into development pathways leading to commercialization. A follow-on survey was developed by the TERMIS-AM Industry Committee to evaluate the financial industry's perspectives on investing in regenerative medical technologies. The survey, composed of 15 questions, was developed and provided to 37 investment organizations in one of three sectors (governmental, private, and public investors). The survey was anonymous and confidential with sector designation the only identifying feature of each respondent's organization. Approximately 80% of the survey was composed of respondents from the public (n=14) and private (n=15) sectors. Each respondent represents one investment organization with the potential of multiple participants participating to form the organization's response. The remaining organizations represented governmental agencies (n=8). Results from this survey indicate that a high percentage ($2MM into regenerative medical companies at the different stages of a company's life cycle. Investors recognized major hurdles to this emerging industry, including regulatory pathway, clinical translation, and reimbursement of these new products. Investments in regenerative technologies have been cyclical over the past 10-15 years, but investors recognized a 1-5-year investment period before the exit via Merger and Acquisition (M&A). Investors considered musculoskeletal products and their top technology choice with companies in the clinical stage

  9. INDUSTRY PARTNERSHIPS LEARNING MODELS FOR SURVEYING AND MAPPING OF VOCATIONAL HIGH SCHOOLS

    Directory of Open Access Journals (Sweden)

    Sunar Rochmadi

    2016-09-01

    Full Text Available This study aims to identify a learning involving the world of work, to formulate the learning model, and to evaluate the learning model. This study used a qualitative approach for design and development research, consisting of the development and validation steps. The study concludes as follows. (1 the learning through partnerships having been conducted in all vocational high schools were industrial practice and vocational practice examination. (2 the constraints of learning through partnerships were mainly the far distance and the industry schedules that did not always match with the school’s. (3 the model development could be done by improving the learning quality by industrial practices in the private companies and with adding the learning model by industry visits, guest teaching, and up-to-date technology training. (4 the implementation of the developed model showed the feasibility and the effectiveness to prepare the students with the competencies required by the world of work. (5 the learning models through partnerships that could be practiced were guest teaching, orientation for industrial practice, industrial practices, students’ industry visits, up-to-date technology training, and vocational practice examination.

  10. Legacies of the uranium ore mining industry and their restoration. A survey of Africa, Asia and Australia

    International Nuclear Information System (INIS)

    Waggitt, P.

    2008-01-01

    Management of the environment in the uranium mining industry has an eventful history of more than 50 years. In addition to examples of successful restoration of mining and preparation sites in some countries there are also numerous cases, in which no or defective restoration left behind serious waste deposits. In the course of the renaissance of the uranium industry there is increasing interest in the rehabilitation of such waste sites. There is still an urgent requirement to eradicate the environmental effects of the old mining industry. Previous deposits could be of interest for renewed working under the present economic boundary conditions. Restoration as an integral part of the current and future uranium mining industry with the application of modern international safety standards is extremely important. The contribution provides a survey of restoration projects of the old mining industry in various parts of the world and shows how the International Atomic Energy Agency, the national supervisory and approval authorities as well as the mining companies collaborate closely at many sites on solution of the difficult problems. (orig.)

  11. The Impact of Ethical Climate on Emotional Organizational Commitment: A Survey in the Accommodation Industry

    OpenAIRE

    Melike Gül; Kaya Nihat Pekbay; Kudret Gül

    2017-01-01

    Organizational commitment is crucial in the service-oriented hospitality industry. A service-oriented firm may achieve high quality service standards and customer satisfaction by employing qualified occupations. Employing qualified staff requires motivation and emotional organizational commitment. In addition, having a positive working ethical climate in the firm is crucial for profitability and productivity. Thus, hospitality businesses can achieve industrial competitiveness. The aim of ...

  12. Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

    NARCIS (Netherlands)

    Visser, I.; Klinkenberg, M.; Hoos, P.; Janssen, H.-G.; van Duynhoven, J.

    2009-01-01

    The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of

  13. Mesitylene-Cored Glucoside Amphiphiles (MGAs) for Membrane Protein Studies: Importance of Alkyl Chain Density in Detergent Efficacy

    DEFF Research Database (Denmark)

    Cho, Kyung Ho; Ribeiro, Orquidea; Du, Yang

    2016-01-01

    Detergents serve as useful tools for membrane protein structural and functional studies. Their amphipathic nature allows detergents to associate with the hydrophobic regions of membrane proteins whilst maintaining the proteins in aqueous solution. However, widely used conventional detergents...

  14. Washing of Cloth Contaminated with Radionuclides Using a Detergent-free Laundry System

    Energy Technology Data Exchange (ETDEWEB)

    Yim, Sung Paal

    2005-07-01

    In this study, a new laundry system to wash clothes without using detergent (detergent-free) was applied to wash clothes contaminated with radionuclides at the RWTF of KAERI. If the clothes contaminated with radionuclides and soil decontaminated and cleaned by washing without using detergent, the problem caused by the detergent could be solved naturally. The experiment was performed in two stages. In the first stage, washability of the processed water from the detergent=free laundry system was investigated with regard to its decontamination efficiency for the radionuclides and the detergency for the soil by using the test cloth specimens. In the second stage, real working clothes contaminated with radionuclides from the RWTF were washed by using a laundry machine equipped with a detergent-free system. Decontamination and detergency of the clothes were estimated after washing and the wastewater was also analyzed for its properties.

  15. A survey of doses to worker groups in the nuclear industry

    International Nuclear Information System (INIS)

    Khan, T.A.; Baum, J.W.

    1991-01-01

    The the US National Council on Radiation Protection and Measurements (NCRP) has suggested ''...as guidance for radiation programs that cumulative exposure not exceed the age of the individual in years x 10 mSv (years x 1 rem).'' The International Commission on Radiological Protection (ICRP) has recommended a dose limit of 10 rem averaged over 5 years. With these developments in mind, the US Nuclear Regulatory Commission (NRC) requested the ALARA Center of the Brookhaven National Laboratory to undertake two parallel studies. One study, which is still ongoing, is to examine the impact of the newly recommended dose limits on the nuclear industry as a whole; the other study was intended to assist in this larger project by looking more closely at the nuclear power industry. Preliminary data had indicated that the critical industry as far as the impact of new regulatory limits were concerned would be the nuclear power industry, because, it was conjectured, there existed a core of highly skilled workers in some groups which routinely get higher than average exposures. The objectives of the second study were to get a better understanding of the situation vis grave a vis the nuclear power industry, by identifying the high-dose worker groups, quantifying the annual and lifetime doses to these groups to see the extent of the problem if there was one, and finally to determine if there were any dose-reduction techniques which were particularly suited to reducing doses to these groups. In this presentation we describe some of the things learned during our work on the two projects. For more detailed information on the project on dose-reduction techniques for high-dose worker groups in the nuclear power industry, see NUREG/CR-5139. An industry/advisory committee has been set up which is in the process of evaluating the data from the larger project on the impact of new dose limits and will shortly produce its report. 7 refs., 5 figs., 6 tabs

  16. Information Assurance in Networked Enterprises: MICSS Class Experiments and Industry Survey Analysis

    National Research Council Canada - National Science Library

    Ray, Parbati

    2001-01-01

    .... The surveys give an insight into how inter-networked companies use their ERP systems, whet their current policies maybe with respect to information management, and what their security and assurance problems maybe...

  17. Detergent organisation in crystals of monomeric outer membrane phospholipase A

    NARCIS (Netherlands)

    Snijder, HJ; Timmins, PA; Kalk, KH; Dijkstra, BW

    The structure of the detergent in crystals of outer membrane phospholipase A (OMPLA) has been determined using neutron diffraction contrast variation. Large crystals were soaked in stabilising solutions, each containing a different H2O/D2O contrast. From the neutron diffraction at five contrasts,

  18. The Effect of Detergent Effluent on the Physico-Chemical ...

    African Journals Online (AJOL)

    MICHAEL HORSFALL

    abundance of Anabaena and Oscillatoria sp. which are pollution indicator ... negative effect the effluent from the detergent factory has on the stream, thus ... in aquatic ecosystems and represents one of the most .... American Public Health Association (1998). ... (Cyanophyta) in Nigeria coastal waters. The ... South Western.

  19. A multivariate calibration procedure for the tensammetric determination of detergents

    NARCIS (Netherlands)

    Bos, M.

    1989-01-01

    A multivariate calibration procedure based on singular value decomposition (SVD) and the Ho-Kashyap algorithm is used for the tensammetric determination of the cationic detergents Hyamine 1622, benzalkonium chloride (BACl), N-cetyl-N,N,N-trimethylammonium bromide (CTABr) and mixtures of CTABr and

  20. Contrast variation SANS experiments to the study of detergent ...

    Indian Academy of Sciences (India)

    Contrast variation SANS experiments to the study of detergent-induced micellization of block copolymers. V K ASWAL1 and J KOHLBRECHER2. 1Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400 085, India. 2Spallation Neutron Source Division, Paul Scherrer Institute, CH-5232 PSI Villigen,.

  1. Ebola Virus Inactivation by Detergents Is Annulled in Serum

    NARCIS (Netherlands)

    van Kampen, Jeroen J. A.; Tintu, Andrei; Russcher, Henk; Fraaij, Pieter L. A.; Reusken, Chantal B. E. M.; Rijken, Mikel; van Hellemond, Jaap J.; van Genderen, Perry J. J.; Koelewijn, Rob; de Jong, Menno D.; Haddock, Elaine; Fischer, Robert J.; Munster, Vincent J.; Koopmans, Marion P. G.

    2017-01-01

    Treatment of blood samples from hemorrhagic fever virus (HFV)-infected patients with 0.1% detergents has been recommended for virus inactivation and subsequent safe laboratory testing. However, data on virus inactivation by this procedure are lacking. Here we show the effect of this procedure on

  2. Arsenic in detergents: Possible danger and pollution hazard

    Science.gov (United States)

    Angino, E.E.; Magnuson, L.M.; Waugh, T.C.; Galle, O.K.; Bredfeldt, J.

    1970-01-01

    Arsenic at a concentration of 10 to 70 parts per million has been detected in several common presoaks and household detergents. Arsenic values of 2 to 8 parts per billion have been measured in the Kansas River. These concentrations are close to the amount (10 parts per billion) recommended by the United States Public Health Service as a drinking-water standard.

  3. Response of resident bacteria in a tropical detergent effluent ...

    African Journals Online (AJOL)

    Bacteria were isolated from a tropical detergent-polluted stream, and their responses to linear alkylbenzene sulfonate (LAS) were investigated. The responses of the resident bacteria were assessed in terms of their ability or failure to grow in the presence of LAS and of their potential to degrade the surfactant. Eighteen ...

  4. Solvent-Detergent Treatment of IgM-Enriched Immunoglobulin

    Directory of Open Access Journals (Sweden)

    Mojgan Pourmokhtar

    2003-08-01

    Full Text Available Viral safety of human plasma products plays a key role in their safe uses. Solvent- detergent (SD virus-inactivation method has gained widespread popularity in the manufacture of biological products. This treatment which inactivates lipid-enveloped viruses effectively consists of incubation of a plasma protein solution in the presence of a non-volatile organic solvent and a detergent. In this study, IgM-enriched immunoglobulin was incubated at 24 °C for 6 h under slow stirring in the presence of tri(n-butyl phosphate (0.3% w/w as solvent and tween 80 (1% w/w as detergent. After completion of the inactivation process and removal of the solvent-detergent, the ability of SD-treatment to remove Infectious Bovine Rhinotracheitis (IBR virus (a lipid-enveloped virus and Foot-and-Mouth Disease virus (a non-enveloped virus were evaluated by "virus spiking studies" using a scaled down process. Reduction factor of 4 log was obtained for the SD-treatment of IgM-enriched immunoglobulin spiked with IBR virus. No virus inactivation was observed in the SD-treated IgM-enriched immunoglobulin, spiked with Foot-and-Mouth Disease virus. It was concluded that treatment of IgM-enriched immunoglobulin with TNBP-TWEEN 80 may be considered as an efficient lipid-enveloped virus inactivation step in the manufacture of this product.

  5. Removal of detergents from SDS-inactivated dextransucrase

    International Nuclear Information System (INIS)

    Husman, D.W.; Mayer, R.M.

    1986-01-01

    Dextransucrase, which is rapidly inactivated by SDS, can be reactivated upon the addition of Triton X-100. Purification of the enzyme, in good yield and homogeneity, has been achieved by chromatography in the presence of SDS. The purified enzyme can be reactivated with Triton, but has large amounts of detergents. It was important to develop procedures for their removal. Density gradient centrifugation of SDS-inactivated or Triton-reactivated enzyme, treatment with Extracti-Gel D (Pierce) or chromatography on hydroxyl apatite (HA), have been examined for their effectiveness in providing detergent-free enzyme in good yield. Ultracentrifugation of SDS-inactivated protein provided limited recovery of active enzyme, but suggested that reactivation could be achieved by the simple removal of the detergent. While similar behavior was observed when the enzyme was eluted from Extracti-Gel, it was also shown that the limited recovery was a result of irreversible inactivation of the enzyme. Recovery could be improved if the enzyme was collected in solutions containing Triton, which has been reported to be a stabilizer. Chromatography of SDS-inactivated enzyme on HA also yielded active enzyme. Good recovery was obtained when Triton-reactivated enzyme was employed in these studies. The degree of detergent removal was determined by utilizing radiolabelled SDS and Triton X-100

  6. Electricity in lieu of nautral gas and oil for industrial thermal energy: a preliminary survey

    Energy Technology Data Exchange (ETDEWEB)

    Tallackson, J. R.

    1979-02-01

    In 1974, industrial processors accounted for nearly 50% of the nation's natural gas consumption and nearly 20% of its consumption of petroleum. This report is a preliminary assessment of the potential capability of the process industries to substitute utility-generated electricity for these scarce fuels. It is tacitly assumed that virtually all public utilities will soon be relying on coal or nuclear fission for primary energy. It was concluded that the existing technology will permit substitution of electricity for approximately 75% of the natural gas and petroleum now being consumed by industrial processors, which is equivalent to an annual usage of 800 million barrels of oil and 9 trillion cubic feet of gas at 1974 levels. Process steam generation, used throughout industry and representing 40% of its energy usage, offers the best near-term potential for conversion to electricity. Electric boilers and energy costs for steam are briefly discussed. Electrically driven heat pumps are considered as a possible method to save additional low-grade energy. Electrical reheating at high temperatures in the primary metals sector will be an effective way to conserve gas and oil. A wholesale shift by industry to electricity to replace gas and oil will produce impacts on the public utilities and, perhaps, those of a more general socio-economic nature. The principal bar to large-scale electrical substitution is economics, not technology. 174 references.

  7. [Response of the algae Gymnodinium kovalevskii (Dinophyta) to exposure to synthetic detergents and distillation].

    Science.gov (United States)

    Aĭzdaĭcher, N A

    2000-01-01

    The effects of synthetic detergents and combined effects of synthetic detergents and water freshening on growth characteristics of the alga Gymnodinium kovalevskii (Dinophyta) were studied. Low concentrations of synthetic detergents (0.1 and 1.0 mg/l) stimulated the algal growth. Elevated concentrations inhibited cell division, affected their motility and induced morphological changes. Contamination with synthetic detergents adversely affected the adaptation plasticity of algae with respect to salinity.

  8. Survey of employment in the UK wind energy industry 1993-95

    International Nuclear Information System (INIS)

    Jenkins, G.

    1996-01-01

    Employment opportunities in the United Kingdom wind power industry are reviewed and compared to job availability in Europe, Canada and the USA, using a postal questionnaire. Most jobs were in manufacturing with consultancy and contract research forming another large group; with over two-thirds being in medium to microsized organizations, a size distribution similar to the manufacturing sector of the United Kingdom economy. Professional and management occupations account for over half of the total jobs making the wind industry a highly skilled area. Estimates suggest that, taking account of direct jobs, and those indirectly associated with the wind power industry, only about 2200 full-time equivalent jobs currently exist in the United Kingdom. (UK)

  9. A survey of gas-side fouling in industrial heat-transfer equipment

    Science.gov (United States)

    Marner, W. J.; Suitor, J. W.

    1983-11-01

    Gas-side fouling and corrosion problems occur in all of the energy intensive industries including the chemical, petroleum, primary metals, pulp and paper, glass, cement, foodstuffs, and textile industries. Topics of major interest include: (1) heat exchanger design procedures for gas-side fouling service; (2) gas-side fouling factors which are presently available; (3) startup and shutdown procedures used to minimize the effects of gas-side fouling; (4) gas-side fouling prevention, mitigation, and accommodation techniques; (5) economic impact of gas-side fouling on capital costs, maintenance costs, loss of production, and energy losses; and (6) miscellaneous considerations related to gas-side fouling. The present state-of-the-art for industrial gas-side fouling is summarized by a list of recommendations for further work in this area.

  10. 76 FR 9013 - Agency Information Collection Activities; Proposed Collection; Comment Request; Detergent Gasoline

    Science.gov (United States)

    2011-02-16

    ... Activities; Proposed Collection; Comment Request; Detergent Gasoline AGENCY: Environmental Protection Agency... this action are those who (1) Manufacture gasoline, post-refinery component, or detergent additives, (2) blend detergent additives into gasoline or post-refinery component, or (3) transport or receive a...

  11. 40 CFR 417.160 - Applicability; description of the manufacture of liquid detergents subcategory.

    Science.gov (United States)

    2010-07-01

    ... manufacture of liquid detergents subcategory. 417.160 Section 417.160 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Detergents Subcategory § 417.160 Applicability; description of the...

  12. 40 CFR 417.150 - Applicability; description of the manufacture of spray dried detergents subcategory.

    Science.gov (United States)

    2010-07-01

    ... detergents, including but not limited to assembly and storage of raw materials, crutching, spray drying... manufacture of spray dried detergents subcategory. 417.150 Section 417.150 Protection of Environment... POINT SOURCE CATEGORY Manufacture of Spray Dried Detergents Subcategory § 417.150 Applicability...

  13. Survey of radiation protection, radiation transport, and shielding information needs of the nuclear power industry. Final report

    International Nuclear Information System (INIS)

    Maskewitz, B.F.; Trubey, D.K.; Roussin, R.W.; McGill, B.L.

    1976-04-01

    The Radiation Shielding Information Center (RSIC) is engaged in a program to seek out, organize, and disseminate information in the area of radiation transport, shielding, and radiation protection. This information consists of published literature, nuclear data, and computer codes and advanced analytical techniques required by ERDA, its contractors, and the nuclear power industry to improve radiation analysis and computing capability. Information generated in this effort becomes a part of the RSIC collection and/or data base. The purpose of this report on project 219-1 is to document the results of the survey of information and computer code needs of the nuclear power industry in the area of radiation analysis and protection

  14. Survey of radiation protection, radiation transport, and shielding information needs of the nuclear power industry. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Maskewitz, B.F.; Trubey, D.K.; Roussin, R.W.; McGill, B.L.

    1976-04-01

    The Radiation Shielding Information Center (RSIC) is engaged in a program to seek out, organize, and disseminate information in the area of radiation transport, shielding, and radiation protection. This information consists of published literature, nuclear data, and computer codes and advanced analytical techniques required by ERDA, its contractors, and the nuclear power industry to improve radiation analysis and computing capability. Information generated in this effort becomes a part of the RSIC collection and/or data base. The purpose of this report on project 219-1 is to document the results of the survey of information and computer code needs of the nuclear power industry in the area of radiation analysis and protection.

  15. Survey of past base isolation applications in nuclear power plants and challenges to industry/regulatory acceptance

    International Nuclear Information System (INIS)

    Malushte, S.R.; Whittaker, A.S.

    2005-01-01

    Seismic base isolation provides many benefits that can facilitate the standardization of future nuclear power plant structures and equipment while reducing the initial/life-cycle cost and construction schedule. This paper presents a survey of past seismic base isolation applications and studies related to nuclear applications and provides a discussion of the challenges that need to be overcome to gain industry and regulatory acceptance for deployment in future US nuclear power plants. Issues related to design, codes/standards/regulations, procurement, and construction, have been identified. (authors)

  16. A Survey of Career Guidance Needs of Industrial Design Students in Taiwanese Universities

    Science.gov (United States)

    Yang, Ming-Ying; You, Manlai

    2010-01-01

    School pupils in Taiwan spend most of their time in studying and having examinations, and consequently many of them decide what major to study in universities rather hastily. Industrial design (ID) programs in universities nowadays recruit students from general and vocational senior high schools through a variety of channels. As a consequence, ID…

  17. 78 FR 19181 - Notice of Request for a New Information Collection: Egg Products Industry Survey

    Science.gov (United States)

    2013-03-29

    ... accurate, up-to-date information on use and adoption rates of industry practices and technologies. The...) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, gender, religion, age, disability, political beliefs, sexual orientation, and marital or family status...

  18. Survey of the development of industrial technology in Japan; Sangyo gijutsu rekishi keisho chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Conditions for creating Japan`s type technologies have been investigated by extracting technologies and experiences meriting the succession to the next generation among the industrial technologies in Japan after World War II. Technological creativity of Japan began to appear from the 1970`s. Quartz watch of SEIKO, U-Matic VTR of SONY, ladle refinery method of DAIDO Steel, PAN-based carbon fiber of TORAY, continuous annealing of Nippon Steel, calculating machine using liquid crystal of SHARP, ASA-400 high sensitivity film of FUJI FILM, and Japanese word-processor of TOSHIBA are the examples. The basic ability to create those products and technology lays in the diversity of firms in electronic device and fine machinery industries consisting the boundary between general and electrical machinery, the systematizing ability and inter-industrial cooperation which were promoted through quality control, automatization of assembly and production control by computer, and the research and development capability which has been brought up during the high economic growth as a learning process of technology. The society and industries have to make efforts to create the new creative conditions for younger generations. Otherwise, Japan`s technology will not develop. 134 refs., 19 figs., 8 tabs.

  19. Effective mitigation efforts to reduce road dust near industrial sites: assessment by mobile pollution surveys.

    Science.gov (United States)

    DeLuca, Patrick F; Corr, Denis; Wallace, Julie; Kanaroglou, Pavlos

    2012-05-15

    Assessment of spatial variation of fugitive dust sources, particularly road dust track-out from industrial sites and its subsequent re-suspension is difficult with fixed air quality monitoring stations given their sparse distribution and the highly localized nature of road dust. Mobile monitoring was employed to measure levels of road dust in the industrial area of the City of Hamilton, Ontario, Canada. Results of this monitoring were used in a Fugitive Dust Control workshop held for local stakeholders, where fugitive dust control solutions were presented. After the workshop, the City of Hamilton and cooperative industrial groups executed enhanced street cleaning and individual industries and facilities performed on-site control activities. Post-workshop mobile air monitoring was performed for comparison to the initial values to determine effectiveness of these approaches. A regression model testing the difference pre- and post-workshop yielded a statistically significant difference in PM(10) measurements demonstrating improvement. The average value of PM(10) prior to the workshop was 114 μg/m(3). Post-workshop the average value dropped to 73 μg/m(3). Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Concomitant production of detergent compatible enzymes by Bacillus flexus XJU-1.

    Science.gov (United States)

    Niyonzima, Francois N; More, Sunil S

    2014-01-01

    A soil screened Bacillus flexus XJU-1 was induced to simultaneously produce alkaline amylase, alkaline lipase and alkaline protease at their optimum levels on a common medium under submerged fermentation. The basal cultivation medium consisted of 0.5% casein, 0.5% starch and 0.5% cottonseed oil as an inducer for protease, amylase, and lipase, respectively. The casein also served as nitrogen source for all 3 enzymes. The starch was also found to act as carbon source additive for both lipase and protease. Maximum enzyme production occurred on fermentation medium with 1.5% casein, 1.5% soluble starch, 2% cottonseed oil, 2% inoculum size, initial pH of 11.0, incubation temperature of 37 °C and 1% soybean meal as a nitrogen source supplement. The analysis of time course study showed that 24 h was optimum incubation time for amylase whereas 48 h was the best time for both lipase and protease. After optimization, a 3.36-, 18.64-, and 27.33-fold increase in protease, amylase and lipase, respectively was recorded. The lipase was produced in higher amounts (37.72 U/mL) than amylase and protease about 1.27 and 5.85 times, respectively. As the 3 enzymes are used in detergent formulations, the bacterium can be commercially exploited to secrete the alkaline enzymes for use in detergent industry. This is the first report for concomitant production of 3 alkaline enzymes by a bacterium.

  1. Optimized production and characterization of a detergent-stable protease from Lysinibacillus fusiformis C250R.

    Science.gov (United States)

    Mechri, Sondes; Kriaa, Mouna; Ben Elhoul Berrouina, Mouna; Omrane Benmrad, Maroua; Zaraî Jaouadi, Nadia; Rekik, Hatem; Bouacem, Khelifa; Bouanane-Darenfed, Amel; Chebbi, Alif; Sayadi, Sami; Chamkha, Mohamed; Bejar, Samir; Jaouadi, Bassem

    2017-08-01

    In this study, we aimed to optimize the cultural and nutritional conditions for protease production by Lysinibacillus fusiformis strain C250R in submerged fermentation process using statistical methodology. The most significant factors (gruel, wheat bran, yeast extract, and FeSO 4 ) were identified by Plackett-Burman design. Response surface methodology (RSM) was used to determine the optimum levels of the screened factors and their interaction. Under the optimized conditions, protease yield 3100U/mL was 4.5 folds higher than those obtained by the use of the initial conditions (680U/mL). Additionally, a new extracellular 51kDa-protease, designated SAPLF, was purified and biochemically characterized from strain C250R. It shows optimum activity at 70°C and pH 10. Its half-life times at 70 and 80°C were 10 and 6-h, respectively. Irreversible inhibition of enzyme activity of SAPLF with serine protease inhibitors demonstrated that it belongs to the serine protease family. Interestingly, its catalytic efficiency was higher than that of SPVP from Aeribacillus pallidus strain VP3 and Alcalase Ultra 2.5L from Bacillus licheniformis. This study demonstrated that SAPLF has a high detergent compatibility and an excellent stain removal compared to Alcalase Ultra 2.5L; which offers an interesting potential for its application in the laundry detergent industry. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Public funding and private investment for R&D: a survey in China's pharmaceutical industry.

    Science.gov (United States)

    Qiu, Lan; Chen, Zi-Ya; Lu, Deng-Yu; Hu, Hao; Wang, Yi-Tao

    2014-06-13

    In recent years, China has experienced tremendous growth in its pharmaceutical industry. Both the Chinese government and private investors are motivated to invest into pharmaceutical research and development (R&D). However, studies regarding the different behaviors of public and private investment in pharmaceutical R&D are scarce. Therefore, this paper aims to investigate the current situation of public funding and private investment into Chinese pharmaceutical R&D. The primary data used in the research were obtained from the China High-tech Industry Statistics Yearbook (2002-2012) and China Statistical Yearbook of Science and Technology (2002-2012). We analyzed public funding and private investment in five aspects: total investment in the industry, funding sources of the whole industry, differences between provinces, difference in subsectors, and private equity/venture capital investment. The vast majority of R&D investment was from private sources. There is a significantly positive correlation between public funding and private investment in different provinces of China. However, public funding was likely to be invested into less developed provinces with abundant natural herbal resources. Compared with the chemical medicine subsector, traditional Chinese medicine and biopharmaceutical subsectors obtained more public funding. Further, the effect of the government was focused on private equity and venture capital investment although private fund is the mainstream of this type of investment. Public funding and private investment play different but complementary roles in pharmaceutical R&D in China. While being less than private investment, public funding shows its significance in R&D investment. With rapid growth of the industry, the pharmaceutical R&D investment in China is expected to increase steadily from both public and private sources.

  3. Assessment of the Vaccine Industry in Iran in Context of Accession to WTO: a Survey Study

    Directory of Open Access Journals (Sweden)

    Amir Hashemi Meshkini

    2012-08-01

    Full Text Available Background :The vaccine industry is one of the most important health-related industries. It can be affected by accession to the World Trade Organization (WTO because of probable dramatic changes in the business environment. Iran has already initiated accession negotiations. Purpose of the study In this paper, we investigate the position of, challenges to, and opportunities for vaccine manufacturing in Iran with regard to accession to the WTO. Methods:This is a qualitative and cross sectional study. To collect information, we designed a questionnaire and interviewed some of the vaccine industry's key opinion leaders in Iran. Before the interviews were conducted, the questionnaires were sent to these individuals by email. Results:According to the interviewees, the country's main challenges with regard to accession to the WTO are the lack of firm internal intellectual property (IP rules, not being recognized as pre-qualified by the World Health Organization (WHO, the use of old equipment, and a lack of cooperation with global vaccine companies. Major conclusions Iran's local vaccine industry, with a long history and international reputation that could be used as an advantage, is faced with several challenges, such as problems with keeping up with Current Good Manufacturing Practice (cGMP, a lack of adequate and meaningful investment in research and development (R&D, and limitations on private sector participation in the production of vaccines. Gradual privatization of the industry, improved international relations, utilization of the R&D power of small hi-tech companies, consistent education of human resources, and modernization of infrastructures and equipment are among the suggested solutions.

  4. Assessment of the vaccine industry in Iran in context of accession to WTO: a survey study.

    Science.gov (United States)

    Hashemi Meshkini, Amir; Kebriaeezadeh, Abbas; Dinarvand, Rasoul; Nikfar, Shekoufeh; Habibzadeh, Mohammadgafar; Vazirian, Iman

    2012-08-30

    The vaccine industry is one of the most important health-related industries. It can be affected by accession to the World Trade Organization (WTO) because of probable dramatic changes in the business environment. Iran has already initiated accession negotiations. In this paper, we investigate the position of, challenges to, and opportunities for vaccine manufacturing in Iran with regard to accession to the WTO. This is a qualitative and cross sectional study. To collect information, we designed a questionnaire and interviewed some of the vaccine industry's key opinion leaders in Iran. Before the interviews were conducted, the questionnaires were sent to these individuals by email. According to the interviewees, the country's main challenges with regard to accession to the WTO are the lack of firm internal intellectual property (IP) rules, not being recognized as pre-qualified by the World Health Organization (WHO), the use of old equipment, and a lack of cooperation with global vaccine companies. Iran's local vaccine industry, with a long history and international reputation that could be used as an advantage, is faced with several challenges, such as problems with keeping up with Current Good Manufacturing Practice (cGMP), a lack of adequate and meaningful investment in research and development (R&D), and limitations on private sector participation in the production of vaccines.Gradual privatization of the industry, improved international relations, utilization of the R&D power of small hi-tech companies, consistent education of human resources, and modernization of infrastructures and equipment are among the suggested solutions.

  5. Daylighting practices of the architectural industry (baseline results of a national survey)

    Energy Technology Data Exchange (ETDEWEB)

    Hattrup, M.P.

    1990-05-01

    A national survey of over 300 commercial design architects was conducted to develop baseline information on their knowledge, perceptions, and use of daylighting in commercial building designs. Pacific Northwest Laboratory conducted the survey for the US Department of Energy's (DOE) Office of Building and Community Systems (BCS). In the survey daylighting was defined as the intentional use of natural light as a partial substitute for artificially generated light. The results suggested that architects need to be educated about the true benefits of daylighting and the impacts it can have on a building's energy performance. Educational programs that will increase the architects' understanding and awareness of modern daylighting technologies and practices should be developed by utilities, stage agencies, and the federal government. If more architects can be made aware of the true effectiveness and positive attributes of daylighting systems and technologies, daylighting may be used in more commercial buildings. The results of the survey show that the more familiar architects feel they are with daylighting, the more they use daylighting. 3 refs., 19 tabs.

  6. A comprehensive survey on selective breeding programs and seed market in the European aquaculture fish industry

    NARCIS (Netherlands)

    Chavanne, Hervé; Janssen, K.P.E.; Hofherr, Johann; Contini, Franca; Haffray, P.; Komen, J.; Nielsen, E.E.; Bargelloni, L.

    2016-01-01

    The use of selective breeding is still relatively limited in aquaculture species. Information on such activities is sparse, hindering an overall evaluation of their success. Here, we report on the results of an online survey of the major aqua-culture breeding companies operating in Europe. Six main

  7. Decision support systems for major accident prevention in the chemical process industry : A developers' survey

    NARCIS (Netherlands)

    Reniers, Genserik L L; Ale, B. J.M.; Dullaert, W.; Foubert, B.

    2006-01-01

    Solid major accident prevention management is characterized by efficient and effective risk assessments. As a means of addressing the efficiency aspect, decision support analysis software is becoming increasingly available. This paper discusses the results of a survey of decision support tools for

  8. 5 CFR 532.221 - Industries included in regular nonappropriated fund surveys.

    Science.gov (United States)

    2010-01-01

    ... nonappropriated fund surveys. 532.221 Section 532.221 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... wholesalers. 44132 Tire dealers. 44311 Appliance, television, and other electronic stores. 44411 Home centers. 44611 Pharmacies and drug stores. 4471 Gasoline stations. 44814 Family clothing stores. 4521 Department...

  9. Recyclability of PET/WPI/PE Multilayer Films by Removal of Whey Protein Isolate-Based Coatings with Enzymatic Detergents

    Directory of Open Access Journals (Sweden)

    Patrizia Cinelli

    2016-06-01

    Full Text Available Multilayer plastic films provide a range of properties, which cannot be obtained from monolayer films but, at present, their recyclability is an open issue and should be improved. Research to date has shown the possibility of using whey protein as a layer material with the property of acting as an excellent barrier against oxygen and moisture, replacing petrochemical non-recyclable materials. The innovative approach of the present research was to achieve the recyclability of the substrate films by separating them, with a simple process compatible with industrial procedures, in order to promote recycling processes leading to obtain high value products that will beneficially impact the packaging and food industries. Hence, polyethyleneterephthalate (PET/polyethylene (PE multi-layer film was prepared based on PET coated with a whey protein layer, and then the previous structure was laminated with PE. Whey proteins, constituting the coating, can be degraded by enzymes so that the coating films can be washed off from the plastic substrate layer. Enzyme types, dosage, time, and temperature optima, which are compatible with procedures adopted in industrial waste recycling, were determined for a highly-efficient process. The washing of samples based on PET/whey and PET/whey/PE were efficient when performed with enzymatic detergent containing protease enzymes, as an alternative to conventional detergents used in recycling facilities. Different types of enzymatic detergents tested presented positive results in removing the protein layer from the PET substrate and from the PET/whey/PE multilayer films at room temperature. These results attested to the possibility of organizing the pre-treatment of the whey-based multilayer film by washing with different available commercial enzymatic detergents in order to separate PET and PE, thus allowing a better recycling of the two different polymers. Mechanical properties of the plastic substrate, such as stress at

  10. Recyclability of PET/WPI/PE Multilayer Films by Removal of Whey Protein Isolate-Based Coatings with Enzymatic Detergents

    Science.gov (United States)

    Cinelli, Patrizia; Schmid, Markus; Bugnicourt, Elodie; Coltelli, Maria Beatrice; Lazzeri, Andrea

    2016-01-01

    Multilayer plastic films provide a range of properties, which cannot be obtained from monolayer films but, at present, their recyclability is an open issue and should be improved. Research to date has shown the possibility of using whey protein as a layer material with the property of acting as an excellent barrier against oxygen and moisture, replacing petrochemical non-recyclable materials. The innovative approach of the present research was to achieve the recyclability of the substrate films by separating them, with a simple process compatible with industrial procedures, in order to promote recycling processes leading to obtain high value products that will beneficially impact the packaging and food industries. Hence, polyethyleneterephthalate (PET)/polyethylene (PE) multi-layer film was prepared based on PET coated with a whey protein layer, and then the previous structure was laminated with PE. Whey proteins, constituting the coating, can be degraded by enzymes so that the coating films can be washed off from the plastic substrate layer. Enzyme types, dosage, time, and temperature optima, which are compatible with procedures adopted in industrial waste recycling, were determined for a highly-efficient process. The washing of samples based on PET/whey and PET/whey/PE were efficient when performed with enzymatic detergent containing protease enzymes, as an alternative to conventional detergents used in recycling facilities. Different types of enzymatic detergents tested presented positive results in removing the protein layer from the PET substrate and from the PET/whey/PE multilayer films at room temperature. These results attested to the possibility of organizing the pre-treatment of the whey-based multilayer film by washing with different available commercial enzymatic detergents in order to separate PET and PE, thus allowing a better recycling of the two different polymers. Mechanical properties of the plastic substrate, such as stress at yield, stress and

  11. A survey of food allergen control practices in the U.S. food industry.

    Science.gov (United States)

    Gendel, Steven M; Khan, Nazleen; Yajnik, Monali

    2013-02-01

    Despite awareness of the importance of food allergy as a public health issue, recalls and adverse reactions linked to undeclared allergens in foods continue to occur with high frequency. To reduce the overall incidence of such problems and to ensure that food-allergic consumers have the information they need to prevent adverse reactions, it is important to understand which allergen control practices are currently used by the food industry. Therefore, the U.S. Food and Drug Administration carried out directed inspections of registered food facilities in 2010 to obtain a broader understanding of industry allergen control practices in the United States. The results of these inspections show that allergen awareness and the use of allergen controls have increased greatly in the last decade, but that small facilities lag in implementing allergen controls.

  12. A survey of occupational health hazards among 7,610 female workers in China's electronics industry.

    Science.gov (United States)

    Yu, Wenlan; Lao, Xiang Qian; Pang, Shulan; Zhou, Jianjiao; Zhou, Anshou; Zou, Jianfang; Mei, Liangying; Yu, Ignatius Tak-sun

    2013-01-01

    To investigate the occupational hazards among Chinese female workers in the electronics industry, the authors systematically sampled a total of 8,300 female workers at random across 4 provinces in a variety of electronics factories. A detailed questionnaire was used to collect information on occupational hazards and the occurrence of occupation-related diseases. The results show that 4,283 female workers (51.9%) were exposed to 1 or more occupational hazards. The most common chemical hazard was organic solvent, and the second most common was heavy metals. The ergonomic hazards included repetitive movements, poor standing posture, and the lifting of heavy goods. More than 60% of the female workers self-reported occupation-related diseases. These results showed that occupational health hazards were common in the electronics industry in China and that they caused serious occupation-related health problems for the female workers therein.

  13. A survey of the effects of brand value on customer satisfaction in pharmaceutical and biological industries

    OpenAIRE

    Alipour, A.; Feizi, S.J.; Heidari, M.

    2016-01-01

    . The purpose of this study was to describe how companies in pharmaceutical and biological sectors can ensure their position in different markets by relying on sustainable, competitive advantages, resulting from the use of a well-defined marketing model with particular emphasis on brand improvement. As competition becomes more intense among companies and phenomena such as global marketing grow in importance, domestic industries in each country become obliged to improve their competitive advan...

  14. Job Burnout and Job Satisfaction among Industry, Mine and Trade Organization Employees: A Questionnaire Survey

    OpenAIRE

    Rahil Kazemi Talachi; Mohammad Bagher Gorji

    2013-01-01

    One of the most important challenges facing organizations is the increasing levels of job burnout among their employees. In the meantime, it poses the question as what the relationship between this factor and job satisfaction is. The aim of this study was to investigate the relationship between burnout and job satisfaction to provide an appropriate model. The population of this study consisted of all employees of Golestan Province industry, mine and trade organization, the number of whom is 1...

  15. Assessment of the vaccine industry in Iran in context of accession to WTO: a survey study

    Directory of Open Access Journals (Sweden)

    Hashemi Meshkini Amir

    2012-08-01

    Full Text Available Abstract Background The vaccine industry is one of the most important health-related industries. It can be affected by accession to the World Trade Organization (WTO because of probable dramatic changes in the business environment. Iran has already initiated accession negotiations. Purpose of the study In this paper, we investigate the position of, challenges to, and opportunities for vaccine manufacturing in Iran with regard to accession to the WTO. Methods This is a qualitative and cross sectional study. To collect information, we designed a questionnaire and interviewed some of the vaccine industry’s key opinion leaders in Iran. Before the interviews were conducted, the questionnaires were sent to these individuals by email. Results According to the interviewees, the country’s main challenges with regard to accession to the WTO are the lack of firm internal intellectual property (IP rules, not being recognized as pre-qualified by the World Health Organization (WHO, the use of old equipment, and a lack of cooperation with global vaccine companies. Major conclusions Iran’s local vaccine industry, with a long history and international reputation that could be used as an advantage, is faced with several challenges, such as problems with keeping up with Current Good Manufacturing Practice (cGMP, a lack of adequate and meaningful investment in research and development (R&D, and limitations on private sector participation in the production of vaccines. Gradual privatization of the industry, improved international relations, utilization of the R&D power of small hi-tech companies, consistent education of human resources, and modernization of infrastructures and equipment are among the suggested solutions.

  16. Report of fact-finding survey in atomic energy industries, 1990

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    In fiscal year 1990, Japanese economy maintained steady domestic civilian demands, and the real rate of economical growth became 5.7%. The total supply of primary energy increased by 5.3% as compared with that in the last year. The share of nuclear power recovered to 9.4% due to the increase of the capacity factor after the lapse of three years. The demand of electric power increased by 7.3% as compared with that in the previous year, and the share of nuclear power in the total generated electric power was 26.3%. The outlay of electric power industry related to atomic energy was 1735.4 billion yen, and 6% increase as compared with that in the previous year. The sales of mining and manufacturing industries related to atomic energy was 1768.1 billion yen and 2% increase as compared with that in the previous year. The construction cost of nuclear power stations was 658.3 billion yen and 17% increase. The civilian workers related to atomic energy in electric power, mining and manufacturing industries were 57687 persons and 7% increase. Kashiwazaki-Kariwa No. 2 plant (1100 MWe BWR) and No. 5 plant (1100 MWe BWR) of Tokyo Electric Power Co., Inc. started the operation, and installed nuclear power generation capacity reached 31.48 million kW of 39 plants. (K.I.)

  17. Medical students' exposure to pharmaceutical industry marketing: a survey at one U.S. medical school.

    Science.gov (United States)

    Bellin, Melena; McCarthy, Susan; Drevlow, Laurel; Pierach, Claus

    2004-11-01

    While much is known about the interactions between the pharmaceutical industry and physicians, very little is known about pharmaceutical marketing directed toward medical students. This study sought to characterize the extent and forms of medical students' exposure to pharmaceutical industry marketing. In 2001-02, an anonymous, 17-item questionnaire was distributed to 165 preclinical and 116 clinical students at the University of Minnesota Medical School-Twin Cities. The main outcome measures were the number and forms of exposures to pharmaceutical industry marketing reported by medical students and whether students had discussed these exposures with teachers or advisors. Preclinical and clinical students were compared using chi(2) analysis (p marketing. Seventy-six (71.7%) clinical students compared to 38 (33.3%) preclinical students recalled over 20 exposures (p textbook (p marketing with an instructor or advisor; 59 (55.7%) clinical students as compared to 87 (80.6%) preclinical students recalled no such discussion (p marketing during their early years of training. Given existing evidence that such exposure influences physicians' practice and prescribing patterns, the authors propose that medical school curricula include formal instruction to prepare students to critically assess these contacts.

  18. Structuring detergents for extracting and stabilizing functional membrane proteins.

    Directory of Open Access Journals (Sweden)

    Rima Matar-Merheb

    Full Text Available BACKGROUND: Membrane proteins are privileged pharmaceutical targets for which the development of structure-based drug design is challenging. One underlying reason is the fact that detergents do not stabilize membrane domains as efficiently as natural lipids in membranes, often leading to a partial to complete loss of activity/stability during protein extraction and purification and preventing crystallization in an active conformation. METHODOLOGY/PRINCIPAL FINDINGS: Anionic calix[4]arene based detergents (C4Cn, n=1-12 were designed to structure the membrane domains through hydrophobic interactions and a network of salt bridges with the basic residues found at the cytosol-membrane interface of membrane proteins. These compounds behave as surfactants, forming micelles of 5-24 nm, with the critical micellar concentration (CMC being as expected sensitive to pH ranging from 0.05 to 1.5 mM. Both by 1H NMR titration and Surface Tension titration experiments, the interaction of these molecules with the basic amino acids was confirmed. They extract membrane proteins from different origins behaving as mild detergents, leading to partial extraction in some cases. They also retain protein functionality, as shown for BmrA (Bacillus multidrug resistance ATP protein, a membrane multidrug-transporting ATPase, which is particularly sensitive to detergent extraction. These new detergents allow BmrA to bind daunorubicin with a Kd of 12 µM, a value similar to that observed after purification using dodecyl maltoside (DDM. They preserve the ATPase activity of BmrA (which resets the protein to its initial state after drug efflux much more efficiently than SDS (sodium dodecyl sulphate, FC12 (Foscholine 12 or DDM. They also maintain in a functional state the C4Cn-extracted protein upon detergent exchange with FC12. Finally, they promote 3D-crystallization of the membrane protein. CONCLUSION/SIGNIFICANCE: These compounds seem promising to extract in a functional state

  19. Lithium-air batteries: survey on the current status and perspectives towards automotive applications from a battery industry standpoint

    Energy Technology Data Exchange (ETDEWEB)

    Park, Myounggu; Sun, Heeyoung; Lee, Hyungbok; Lee, Junesoo [Battery R and D, SK Innovation, Wonchon-dong, Yuseong-gu, Daejeon (Korea, Republic of); Cho, Jaephil [Interdisciplinary School of Green Energy, Ulsan National Institute of Science and Technology (UNIST), Ulsan (Korea, Republic of)

    2012-07-15

    Li-air rechargeable batteries theoretically have advantages from both secondary batteries and fuel cells, which can be viewed as the best technological blends for automotive applications resolving the so called mileage anxiety problem due to the limited driving range of electrical vehicles based upon Li-ion batteries; this problem is rooted in the intrinsically small energy density of Li-ion batteries. This very scientific trait of Li-air batteries, which is apparently suited to the requirements of batteries for future electric vehicles, has induced quite a strong surge of research recently. This occurrence has motivated the authors to undertake a thorough review in an effort to understand the current status of Li-air battery related technologies. A comprehensive survey from a battery industry standpoint has been conducted on the fundamentals of chemistry, utilized Li-air cell configurations (or types) vs. performance, and major components comprising Li-air batteries using various sources of previously published peer-reviewed journal papers, book chapters, patents, and industrial reports. The survey results are presented here. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Relevance of the futron/zogby survey conclusions to the current space tourism industry

    Science.gov (United States)

    Ziliotto, Véronique

    2010-06-01

    Thanks to recent technological achievements such as Burt Rutan's SpaceShipOne in 2004, Bigelow's Genesis I in July 2006 and Genesis II in July 2007 and the success of space adventures' flights to the ISS, space tourism is leaving the realm of science-fiction. It is now becoming increasingly familiar to the general public and even recognized by institutional bodies. The Futron/Zogby survey, revised in 2006 and completed with the 2006. Adventurers survey constitutes a good basis to understanding the characteristics of the nascent suborbital market and the profile of the potential customers for both suborbital and orbital travel. The previsions of these studies will be contrasted with recent market and customers' data that was not available at the time.

  1. Cross sectional survey on association between alcohol, betel- nut, cigarette consumption and health promoting behavior of industrial workers in Ghaziabad.

    Science.gov (United States)

    Arora, Dimple; Marya, Charu Mohan; Menon, Ipseeta; Oberoi, Sukhvinder Singh; Dhingra, Chandan; Anand, Richa

    2015-01-01

    The work force in industries are at risk of developing unduly high rates of health and behaviour related problems including abuse of alcohol, betel nut and cigarette (alcohol, betel nut and cigarette consumption). This study describes the relationships between alcohol, betel nut and cigarette consumption and health promoting behaviour among industrial workers. A cross sectional survey was conducted on workers in various industries of Ghaziabad city with concerned authority permission. A sample size of 732 workers was calculated based on pilot study. Through Simple random sampling 732 workers in 20 to 50 years age group with informed consent were interviewed through structured, pretested, validated questionnaire in vernacular language by one calibrated investigator. Data on socio demography, alcohol, betel nut and cigarette consumption pattern and health behaviour were collected. The association between health promoting behaviour and alcohol, betel nut and cigarette consumption was analysed by Logistic regression and Chi-square test through SPSS 16 at pbetel nut and cigarette consumption in study population was 88%. The prevalence of individual alcohol, betel nut and cigarette consumption were 82%, 68% and 79% respectively. Combined alcohol, betel nut and cigarette prevalence in study population was 58%. Alcohol and cigarette users were significantly higher (pbetel nut and cigarette users.

  2. Associations of cancer site and type with occupation and industry from the Third National Cancer Survey Interview.

    Science.gov (United States)

    Williams, R R; Stegens, N L; Goldsmith, J R

    1977-10-01

    From the Third National Cancer Survey (TNCS) Interview Study of 7,518 incident cases, lifetime histories of occupations and industries were studied for associations with specific cancer sites and types while controlling for age, sex, race, education, use of cigarettes or alcohol, and geographic location. Lung cancer patients were found more often than expected among several categories including trucking, air transportation, wholesaling, painting, building construction, building maintenance, and manufacturing (furniture, transportation equipment, and food products). Controlling for cigarette smoking did not change these associations. Leukemia and multiple myeloma were associated with sales personnel of both sexes, whereas lymphomas and Hodgkin's disease were excessive among women working in the medical industry. Other associations included rectal cancer with several retail industries; prostate cancer with ministers, farmers, plumbers, and coal miners; malignant melanoma with school teachers; and invasive cervical cancer with women working in hotels and restaurants. Breast cancer patients were more common among women who were teachers or other professionals and who worked in business and finance (even after controlling for education). Many other findings are presented in detailed tables. Results are reported mainly as a research resource for use by other investigators doing work in this field. Suggestions are given for future studies.

  3. Trends in Food Research and Development: A Survey of the Commercial Food Industry

    Science.gov (United States)

    1987-09-01

    top priority of research and development in the food industry; however, the consumer market has chanqed dramatically since the beginning of this decade...Canned & Preserved Fruits & Vegetables 45.6 204 Grain Mill Products 32.4 205 Bakery Products 33.8 206 Sugar & Confectionery Products 32.4 207 Fats & Oils...15.6 40.6 39.1 Aseptic Packaging of Particulates 0.0 0.0 14.5 36.0 49.5 Genetic Engineering 1.5 7.6 21.2 36.4 33.3 The market share of frozen foods is

  4. A comprehensive survey on selective breeding programs and seed market in the European aquaculture fish industry

    DEFF Research Database (Denmark)

    Chavanne, Hervé; Janssen, Kasper; Hofherr, Johann

    2016-01-01

    –50 % market share. Only part of the European fish aquaculture industry today fully exploits selective breeding to the best advantage. A larger impact assessment still needs to be made by the remainder, particularly on the market share of fish seed (eggs, larvae or juveniles) and its consequences for hatchery...... of molecular tools is now common in all programs, mainly for pedigree traceability. An increasing number of programs use either genomic or marker-assisted selection. Results related to the seed production market confirmed that for Atlantic salmon there are a few dominant players at the European level, with 30...

  5. Detergent activation of the binding protein in the folate radioassay

    International Nuclear Information System (INIS)

    Hansen, S.I.; Holm, J.; Lyngbye, J.

    1982-01-01

    A minor cow's whey protein associated with β-lactoglobulin is used as binding protein in the competitive radioassay for serum and erythrocyte folate. Seeking to optimize the assay, we tested the performance of binder solutions of increasing purity. The folate binding protein was isolated from cow's whey by means of CM-Sepharose CL-6B cation-exchange chromatography, and further purified on a methotrexate-AH-Sepharose 4B affinity matrix. In contrast to β-lactoglobulin, the purified protein did not bind folate unless the detergents cetyltrimethylammonium (10 mmol/Ll) or Triton X-100 (1 g/L) were present. Such detergent activation was not needed in the presence of serum. There seems to be a striking analogy between these phenomena and the well-known reactivation of certain purified membrane-derived enzymes by surfactants

  6. Radioactivity Measurement in the Detergent Products by Gamma Spectrometry

    International Nuclear Information System (INIS)

    Ksouri, Abir

    2009-01-01

    Our study focuses on the evaluation of the level of radioactivity in the detergents. We have determined the specific activities of gamma emitting radionuclides belonging to the natural families of uranium, thorium and potassium using gamma spectrometry. The activities of radionuclides ( 235 U, 238U , 226 Ra, 232 Th, 40K) and their descendants are below the minimum detectable activity for dishwasher products, soaps, bleaches and shampoos, whereas they are found to levels considered very low (between 0,2 and 13 Bq/kg on average) in the products washes linens. These values are always lower than those of raw materials, what is explained by the conservation of radioactive material throughout the manufacturing process. The effective dose due to external exposure estimated below the regulatory standard recommended (<1 mSv / year), allows us to show that detergent products are not contaminated by radioactivity, are healthy and do not have harmful radiological impact on the consumer.

  7. Characterization of toxic waste produced in PYMES manufacturing detergents

    International Nuclear Information System (INIS)

    Campuzano, Silvia; Camacho, Judith Elena; Alvarez, Alicia

    2006-01-01

    From the protection of the environment, the problem of the residuals squatter a main place in the environmental administration; presently study a test pilot was standardized, to characterize the toxic waste generated in the production of detergents, to standardize methods of chemical valuation and microbiological of polluted waters that allow later on to apply methods of biological purification and processes of bio-treatment of residuals, the project macro of handling of toxic waste it was addressed this way in small and medium companies producers of detergents. The presence settled down of toxic in the studied waste, represented in surfactants significant amounts, phenols, hydrocarbons, fat and phosphates and the decrease of its quantity in front of the action of bacteria, situation that allowed concluding that the approach to the biotransformation process could be carried out

  8. Nanoparticles in facade coatings: a survey of industrial experts on functional and environmental benefits and challenges

    International Nuclear Information System (INIS)

    Hincapié, Ingrid; Künniger, Tina; Hischier, Roland; Cervellati, Dario; Nowack, Bernd; Som, Claudia

    2015-01-01

    Integrating engineered nanoparticles (ENPs) into facade coatings is expected to offer considerable potential for improved or novel functionality, or even several functionalities at the same time (multifunctional materials). Little information is available about the tangible use of ENPs in facade coatings and the real improvements that their functionalities provide. In order to increase this information, we carried out a survey among selected coating manufacturers and ENP producers in Europe. We asked them about the improved functionalities enabled by ENPs, the quality of nano-enhanced facade coatings in comparison to conventional ones, and the handling of waste. The survey results indicated that the ENPs most frequently used in facade coatings in Europe were silver, titanium dioxide, and silicon dioxide. The most frequently mentioned potential benefits were ultraviolet-protection, water and dirt repellency (easy to clean), and antimicrobial properties. Improving environmental performance through the use of nano-enhanced facade coatings did not appear to be a focus for innovation. The survey also revealed mixed results in the comparison between nano-enhanced and conventional facade coatings: 36 % of respondents saw a notable improvement, 27 % noted a gradual improvement of functionalities, and 37 % detected no improvement over traditional materials. Some respondents mentioned a variety of tests that can be applied to investigate the quality of coating functionalities. These tests could be valuable in helping us to better understand the tangible improvements of nano-enhanced facade coating functionalities. Respondents were uncertain about how to properly handle the wastes resulting from nano-enhanced products

  9. Nanoparticles in facade coatings: a survey of industrial experts on functional and environmental benefits and challenges

    Energy Technology Data Exchange (ETDEWEB)

    Hincapié, Ingrid [EMPA Swiss Federal Laboratories for Materials Science and Technology, Technology and Society Laboratory (Switzerland); Künniger, Tina [EMPA Swiss Federal Laboratories for Materials Science and Technology, Applied Wood Materials Laboratory (Switzerland); Hischier, Roland [EMPA Swiss Federal Laboratories for Materials Science and Technology, Technology and Society Laboratory (Switzerland); Cervellati, Dario [GFC Chimica S.r.l (Italy); Nowack, Bernd; Som, Claudia, E-mail: claudia.som@empa.ch [EMPA Swiss Federal Laboratories for Materials Science and Technology, Technology and Society Laboratory (Switzerland)

    2015-07-15

    Integrating engineered nanoparticles (ENPs) into facade coatings is expected to offer considerable potential for improved or novel functionality, or even several functionalities at the same time (multifunctional materials). Little information is available about the tangible use of ENPs in facade coatings and the real improvements that their functionalities provide. In order to increase this information, we carried out a survey among selected coating manufacturers and ENP producers in Europe. We asked them about the improved functionalities enabled by ENPs, the quality of nano-enhanced facade coatings in comparison to conventional ones, and the handling of waste. The survey results indicated that the ENPs most frequently used in facade coatings in Europe were silver, titanium dioxide, and silicon dioxide. The most frequently mentioned potential benefits were ultraviolet-protection, water and dirt repellency (easy to clean), and antimicrobial properties. Improving environmental performance through the use of nano-enhanced facade coatings did not appear to be a focus for innovation. The survey also revealed mixed results in the comparison between nano-enhanced and conventional facade coatings: 36 % of respondents saw a notable improvement, 27 % noted a gradual improvement of functionalities, and 37 % detected no improvement over traditional materials. Some respondents mentioned a variety of tests that can be applied to investigate the quality of coating functionalities. These tests could be valuable in helping us to better understand the tangible improvements of nano-enhanced facade coating functionalities. Respondents were uncertain about how to properly handle the wastes resulting from nano-enhanced products.

  10. Surveying multiple health professional team members within institutional settings: an example from the nursing home industry.

    Science.gov (United States)

    Clark, Melissa A; Roman, Anthony; Rogers, Michelle L; Tyler, Denise A; Mor, Vincent

    2014-09-01

    Quality improvement and cost containment initiatives in health care increasingly involve interdisciplinary teams of providers. To understand organizational functioning, information is often needed from multiple members of a leadership team since no one person may have sufficient knowledge of all aspects of the organization. To minimize survey burden, it is ideal to ask unique questions of each member of the leadership team in areas of their expertise. However, this risks substantial missing data if all eligible members of the organization do not respond to the survey. Nursing home administrators (NHA) and directors of nursing (DoN) play important roles in the leadership of long-term care facilities. Surveys were administered to NHAs and DoNs from a random, nationally representative sample of U.S. nursing homes about the impact of state policies, market forces, and organizational factors that impact provider performance and residents' outcomes. Responses were obtained from a total of 2,686 facilities (response rate [RR] = 66.6%) in which at least one individual completed the questionnaire and 1,693 facilities (RR = 42.0%) in which both providers participated. No evidence of nonresponse bias was detected. A high-quality representative sample of two providers in a long-term care facility can be obtained. It is possible to optimize data collection by obtaining unique information about the organization from each provider while minimizing the number of items asked of each individual. However, sufficient resources must be available for follow-up to nonresponders with particular attention paid to lower resourced, lower quality facilities caring for higher acuity residents in highly competitive nursing home markets. © The Author(s) 2014.

  11. Electricity industry restructuring and distribution Grids' Take-Over. A survey of foreign case studies

    International Nuclear Information System (INIS)

    Indigenti, S.

    1999-01-01

    The paper surveys some case studies drawn from five foreign countries experience in distribution restructuring and property changes. From transaction prices has been derived the indirect distribution grid evaluation by the investors. The resulting values are widespread and cannot be taken as a sound reference for similar future property transfers in Italy. This paper may be looked at as a methodological guides that will likely shed some light on the possible implementations of the recent electricity bill 79/99 named Decreto Bersani [it

  12. Anaerobic codigestion of municipal, farm, and industrial organic wastes: A survey of recent literature

    DEFF Research Database (Denmark)

    Alatriste-Mondragon, Felipe; Samar, P.; Cox, H.H.J.

    2006-01-01

    increase digester gas production and provide savings in the overall energy costs of plant operations. Methane recovery also helps to reduce the emission of greenhouse gases to the atmosphere. The goal of this literature survey was to summarize the research conducted in the last four years on anaerobic......-stage processes), and the operation temperature (e.g., mesophilic or thermophilic). Only a few reports on pilot; and full-scale studies were found. These evaluate general process performance and pretreatment of codigestates, energy production, and treatment costs....

  13. Effect of Detergents on Galactoside Binding by Melibiose Permeases.

    Science.gov (United States)

    Amin, Anowarul; Hariharan, Parameswaran; Chae, Pil Seok; Guan, Lan

    2015-09-29

    The effect of various detergents on the stability and function of the melibiose permeases of Escherichia coli (MelBEc) and Salmonella typhimurium (MelBSt) was studied. In n-dodecyl-β-d-maltoside (DDM) or n-undecyl-β-d-maltoside (UDM), WT MelBSt binds melibiose with an affinity similar to that in the membrane. However, with WT MelBEc or MelBSt mutants (Arg141 → Cys, Arg295 → Cys, or Arg363 → Cys), galactoside binding is not detected in these detergents, but binding to the phosphotransferase protein IIA(Glc) is maintained. In the amphiphiles lauryl maltose neopentyl glycol (MNG-3) or glyco-diosgenin (GDN), galactoside binding with all of the MelB proteins is observed, with slightly reduced affinities. MelBSt is more thermostable than MelBEc, and the thermostability of either MelB is largely increased in MNG-3 or GDN. Therefore, the functional defect with DDM or UDM likely results from the relative instability of the sensitive MelB proteins, and stability, as well as galactoside binding, is retained in MNG-3 or GDN. Furthermore, isothermal titration calorimetry of melibiose binding with MelBSt shows that the favorable entropic contribution to the binding free energy is decreased in MNG-3, indicating that the conformational dynamics of MelB is restricted in this detergent.

  14. Inactivation of a solid-state detergent protease by hydrogen peroxide vapor and humidity

    DEFF Research Database (Denmark)

    Biran, Suzan; Jensen, Anker Degn; Kiil, Søren

    2009-01-01

    An experimental study on solid-state stability of a detergent protease (Savinase®) is reported. The inactivation kinetics of technical grade enzyme powder was determined as a function of gas phase H2O2 concentration and humidity by employing a quick assay running over few hours instead of several...... weeks as typical in industry. The results indicated that enzymes adsorbed significant amounts of moisture and H2O2 during exposure. The amount of adsorbed H2O2 did not depend on humidity in the gas stream, which implied that water and H2O2 were not competing for the same adsorption sites. Inactivation...... of the solid-state enzyme was caused by the mutual effect of increasing hydration and H2O2 (g) concentration. No auto-proteolytic activity or covalently bound aggregate formation was detected. A simple mechanism for solid-state enzyme oxidation was proposed and the kinetic parameters in the resulting rate...

  15. How is post-industrial decline associated with the geography of physical activity? Evidence from the Health Survey for England.

    Science.gov (United States)

    Rind, Esther; Jones, Andy; Southall, Humphrey

    2014-03-01

    In recent decades, the prevalence of physical activity has declined considerably in many developed countries, which has been related to rising levels of obesity and several weight-related medical conditions, such as coronary heart disease. There is evidence that areas exhibiting particularly low levels of physical activity have undergone a strong transition away from employment in physically demanding occupations. It is proposed that such processes of deindustrialisation may be causally linked to unexplained geographical disparities in physical activity. This study investigates how geographical variations in deindustrialisation are associated with current levels of physical activity across different activity domains and relevant macro-economic time periods in England. The analysis includes data on 27,414 adults from the Health Survey for England 2006 and 2008 who reported total, occupational, domestic, recreational and walking activity. Based on employment change in industries associated with heavy manual work, a local measurement of industrial decline was developed, covering the period 1841-2001. We applied a multilevel modelling approach to study associations between industrial decline and physical activity. Results indicate that the process of deindustrialisation appears to be associated with patterns of physical activity and that this is independent of household income. The effects observed were generally similar for men and women. However, the nature of the association differed across areas, time periods and employment types; in particular, residents of districts characterised by a history of manufacturing and mining employment had increased odds of reporting low activity levels. We conclude that post-industrial change may be a factor in explaining present-day variations in physical activity, emphasising the plausible impact of inherited cultures and regional identities on health related behaviours. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Offshoring: Impacts on the Nordic welfare states and industrial relations - Survey based evidence from Denmark

    DEFF Research Database (Denmark)

    Refslund, Bjarke

    with much lower wages and other costs as well as less strict labour market regulation as well as other regulation e.g. environmental than found in the Nordic countries. The integration of e.g. the Chinese and Indian labour markets in the world economy, but more importantly for the Nordic economies...... (ICT) as well as transportation, this has made the process of relocation even more accessible. This adds yet another dimension to the impact internationalisation is having on national industrial relations as well as welfare state policies and general labour market regulation. Other central features...... of the more internationalised economy are increasing trade in intermediates, rising FDI and increasing competition. In this context where international relocation is increasingly accessible the phenomenon attracts much attention in both academic analysis, media reports as well as policy analysis. But our...

  17. The natural gas industry - a survey; Erdgaswirtschaft - Eine Branche im Ueberblick

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    The situation of natural gas in the Federal Republic of Germany is described, with particular emphasis on the advantages and consequences of natural gas supply. The brochure discusses the role of natural gas on the energy market, the reliability of natural gas supply, the environmental impacts, the energy-saving effect of natural gas, natural gas prices, the competitive strength of the German gas industry, and the long-term reliability of natural gas supply. (orig.) [German] Die Situation des Erdgases in der Bundesrepublik Deutschland wird beschrieben, wobei die wichtigsten Vorteile und Auswirkungen der Erdgasversorgung besonders hervorgehoben werden. Es geht um die Stellung des Erdgases im Energiemarkt, die Sicherheit der Energieversorgung, Umweltschutz, Energieeinsparung durch Erdgaseinsatz, Erdgaspreise, Leistungsfaehigkeit der deutschen Gaswirtschaft und um die langfristig gesicherte Erdgasversorgung. (orig.)

  18. Survey dataset on work-life conflict of women in the construction industry.

    Science.gov (United States)

    Tunji-Olayeni, Patience F; Afolabi, Adedeji O; Adewale, Bukola A; Fagbenle, Ayoola O

    2018-08-01

    Work-life conflict can have a detrimental effect on family life, particularly for women who have to work in order to support their families financially. The data set presents the views of 50 female construction professionals in Lagos, Nigeria through a purposive sampling technique with the aid of questionnaire. Categorical Regression was used to assess the effect of work pressure on family expectations. The features of the respondents in terms of profession, years of experience, office location and household characteristics were presented in bar chart. Analysis of the data can provide information on the work experiences of women in the construction industry particularly work load, hours worked per day, work on weekends and work on holidays. The data can also provide insights on the family expectations that are significantly affected by work pressure.

  19. Detergent extraction of herpes simplex virus type 1 glycoprotein D by zwitterionic and non-ionic detergents and purification by ion-exchange high-performance liquid chromatography

    NARCIS (Netherlands)

    Welling-Wester, S; Feijlbrief, M; Koedijk, DGAM; Welling, GW

    1998-01-01

    Detergents (surfactants) are the key reagents in the extraction and purification of integral membrane proteins. Zwitterionic and non-ionic detergents were used for the extraction of recombinant glycoprotein D (gD-1) of herpes simplex virus type 1 (HSV-1) from insect cells infected with recombinant

  20. Characterization of the Activity and Stability of Amylase from Saliva and Detergent: Laboratory Practicals for Studying the Activity and Stability of Amylase from Saliva and Various Commercial Detergents

    Science.gov (United States)

    Valls, Cristina; Rojas, Cristina; Pujadas, Gerard; Garcia-Vallve, Santi; Mulero, Miquel

    2012-01-01

    This article presents two integrated laboratory exercises intended to show students the role of [alpha]-amylases (AAMYs) in saliva and detergents. These laboratory practicals are based on the determination of the enzymatic activity of amylase from saliva and different detergents using the Phadebas test (quantitative) and the Lugol test…

  1. A compilation of life cycle studies for six household detergent product categories in Europe: the basis for product-specific A.I.S.E. Charter Advanced Sustainability Profiles.

    Science.gov (United States)

    Golsteijn, Laura; Menkveld, Rimousky; King, Henry; Schneider, Christine; Schowanek, Diederik; Nissen, Sascha

    2015-01-01

    A.I.S.E., the International Association for Soaps, Detergents and Maintenance Products, launched the 'A.I.S.E. Charter for Sustainable Cleaning' in Europe in 2005 to promote sustainability in the cleaning and maintenance products industry. This Charter is a proactive programme for translating the concept of sustainable innovation into reality and actions. Per product category, life cycle assessments (LCA) are used to set sustainability criteria that are ambitious, but also achievable by all market players. This paper presents and discusses LCAs of six household detergent product categories conducted for the Charter, i.e.: manual dishwashing detergents, powder and tablet laundry detergents, window glass trigger spray cleaners, bathroom trigger spray cleaners, acid toilet cleaners, and bleach toilet cleaners. Relevant impact categories are identified, as well as the life cycle stages with the largest contribution to the environmental impact. It was concluded that the variables that mainly drive the results (i.e. the environmental hotspots) for manual dishwashing detergents and laundry detergents were the water temperature, water consumption (for manual dishwashing detergents), product dosage (for laundry detergents), and the choice and amount of surfactant. By contrast, for bathroom trigger sprays, acid and bleach toilet cleaners, the driving factors were plastic packaging, transportation to retailer, and specific ingredients. Additionally, the type of surfactant was important for bleach toilet cleaners. For window glass trigger sprays, the driving factors were the plastic packaging and the type of surfactant, and the other ingredients were of less importance. A.I.S.E. used the results of the studies to establish sustainability criteria, the so-called 'Charter Advanced Sustainability Profiles', which led to improvements in the marketplace.

  2. [Air-conditioner disease. Results of an industrial medicine survey (author's transl)].

    Science.gov (United States)

    Molina, C; Aiache, J M; Bedu, M; Menaut, P; Wahl, D; Brestowski, J; Grall, Y

    1982-07-03

    The results of a survey conducted in a company employing 1850 persons working in air-conditioned premises are reported. One hundred and five persons were examined, including 790 who mostly complained of respiratory disorders and 20 controls. Regular check-ups during the last two years have failed to reveal any serious disease. The most frequent complaints were rhinitis and tracheitis, especially among female employees. No alveolitis was observed. The finding of Bacillus subtilis in samples of ambient air and air-conditioner filters in conjunction with the presence of precipitating antibodies against crude extracts from these samples, suggested that the respiratory disorders might have been due to this microorganism. A multifactorial analysis demonstrated a statistically significant correlation between clinical symptoms and immunological disorders. The air-conditioner disease, therefore, may present as a benign condition.

  3. Innovation in Industrial Clusters: a Survey of Footwear Companies in Brazil

    Directory of Open Access Journals (Sweden)

    Hélcio Martins Tristão

    2013-09-01

    Full Text Available The aim of this study is to characterize the relationships in innovation and business clustering processes in the productive chain of small and medium enterprises (SME of Brazil. The object of study are SMEs the local procuctive cluster of the shoes in Franca, State of São Paulo. The conceptual model developed is based on the following constructs: vertical integration, innovation and characteristics of the cluster, and it is focused on identifying the agents that act predominantly in product innovation processes in the cluster. A survey was conducted. It was found that there is cooperation between the companies in the productive arrangement studied, and that shoe manufacturers are those who, predominantly, stimulate innovation within the cluster.

  4. Status of the Potato Processing Industry in Kenya: Result of a Survey in Nairobi

    International Nuclear Information System (INIS)

    Walingo, A.M.; Kabira, J.N.; Ewell, P.T.

    1999-01-01

    A survey conducted in Nairobi showed that potato chips (French fries)and potato crisps (Chips) were the most common potato products on the market. Potato varieties preferred for the preparations of potato chips were the long types, mainly Nyayo (41%) and Roslin tana (38%). The Red-skinned Kerr's pink (22%) and white-skinned Dutch Robijn (78%) were preferred for crisps. Processors for crisps are more demanding on the quality and types of fresh potatoes used than crisps. Tuber immaturity was a common problem adversely affecting processors' profit margins due to high oil absorption particularly in chips, now a common lunch-time snack in Nairobi. The quality of products on the market could be improved further

  5. Wear of dentine in vitro by toothpaste abrasives and detergents alone and combined.

    Science.gov (United States)

    Moore, C; Addy, M

    2005-12-01

    To measure in vitro the abrasion of dentine by toothpaste detergents and abrasives alone and combined. Detergents used were tego betain, sodium lauryl sulphate (SLS), adinol and pluronic diluted to 1% w/v. Abrasives were three artificial silicas, tixosil 73 and 123 and Zeodent 113, and calcium carbonate used at 2.5% w/v. Flat human dentine specimens were brushed with aqueous detergent solutions or abrasive slurries, detergent abrasive slurries and water for 20,000 brush strokes. Dentine loss was measured by non-contacting profilometry at 10,000 and 20,000 strokes. Silica particle size distribution was measured by laser deflection. Loss of dentine occurred with all detergents, abrasives and detergent abrasion combinations, but was not linear with number of brush strokes. Water appeared to remove the smear layer only, but all detergents exceeded the predicted smear layer thickness. The silica abrasives differed in abrasion properties despite similar particle size distribution. Different detergents modulated the abrasives actions in mainly positive or mainly negative directions. Detergents appear able to attack the dentine surface to produce wear. Abrasives vary considerably in wear produced under similar conditions. Detergents modulate the effect of abrasives in a way that may reflect the rheological properties of the mixture.

  6. NMR spectroscopic and analytical ultracentrifuge analysis of membrane protein detergent complexes

    Directory of Open Access Journals (Sweden)

    Choe Senyon

    2007-11-01

    Full Text Available Abstract Background Structural studies of integral membrane proteins (IMPs are hampered by inherent difficulties in their heterologous expression and in the purification of solubilized protein-detergent complexes (PDCs. The choice and concentrations of detergents used in an IMP preparation play a critical role in protein homogeneity and are thus important for successful crystallization. Results Seeking an effective and standardized means applicable to genomic approaches for the characterization of PDCs, we chose 1D-NMR spectroscopic analysis to monitor the detergent content throughout their purification: protein extraction, detergent exchange, and sample concentration. We demonstrate that a single NMR measurement combined with a SDS-PAGE of a detergent extracted sample provides a useful gauge of the detergent's extraction potential for a given protein. Furthermore, careful monitoring of the detergent content during the process of IMP production allows for a high level of reproducibility. We also show that in many cases a simple sedimentation velocity measurement provides sufficient data to estimate both the oligomeric state and the detergent-to-protein ratio in PDCs, as well as to evaluate the homogeneity of the samples prior to crystallization screening. Conclusion The techniques presented here facilitate the screening and selection of the extraction detergent, as well as help to maintain reproducibility in the detergent exchange and PDC concentration procedures. Such reproducibility is particularly important for the optimization of initial crystallization conditions, for which multiple purifications are routinely required.

  7. Abnormal condition and events analysis for instrumentation and control systems. Volume 2: Survey and evaluation of industry practices. Final report

    International Nuclear Information System (INIS)

    McKemy, S.; Marcelli, M.; Boehmer, N.; Crandall, D.

    1996-01-01

    The ACES Project was initiated to identify a cost-effective methodology for addressing abnormal conditions and events (ACES) in digital upgrades to nuclear power plant systems, as introduced by IEEE Standard 7-4.3.2-1993. Several methodologies and techniques currently in use in the defense, aerospace, and other communities for the assurance of digital safety systems were surveyed, and although several were shown to possess desirable qualities, none sufficiently met the needs of the nuclear power industry. This report describes a tailorable methodology for performing ACES analysis that is based on the more desirable aspects of the reviewed methodologies and techniques. The methodology is applicable to both safety- and non-safety-grade systems, addresses hardware, software, and system-level concerns, and can be applied in either a lifecycle or post-design timeframe. Employing this methodology for safety systems should facilitate the digital upgrade licensing process

  8. An epidemiology survey on the worker's accident death in China nuclear industry

    International Nuclear Information System (INIS)

    Bao Shouchen; Gao Zenglin; Chang Xuezhang

    1997-01-01

    To evaluate the worker's accident death in China nuclear industry, the author adopted epidemiological method, ICD-9 death classification principle in investigating the cause of all deaths in 11 units from their setting up to the end of 1990. There were 786 cases of accident death which was in the second place among all death causation. The crude mortality was 50.98 x 10 -5 , standard mortality 46.56 x 10 -5 , and SMR 1.20 (P>0.01). Average death age was 34.93 years. There wasn't obvious increase or decrease trends over the years (P>0.05). The most accident death was injury suffered on the job (29.90%), the second was suicide (22.52%), third, transport accident (10.81%) and next, drowning (8.40%), accidental fall (6.87%), poisoning (4.20%). Potential life lose was 25743 years. Relative risk (RR) for accident death of male is bigger than that of female. and the higher RR in radiation group compared with non-radiation group, came from uranium geological teams and mines mainly, while without proof of radioactivity itself

  9. A survey of the effects of brand value on customer satisfaction in pharmaceutical and biological industries

    Directory of Open Access Journals (Sweden)

    Alipour, A.

    2016-07-01

    Full Text Available . The purpose of this study was to describe how companies in pharmaceutical and biological sectors can ensure their position in different markets by relying on sustainable, competitive advantages, resulting from the use of a well-defined marketing model with particular emphasis on brand improvement. As competition becomes more intense among companies and phenomena such as global marketing grow in importance, domestic industries in each country become obliged to improve their competitive advantages in order to survive from a marketing perspective. Customer satisfaction is among factors which could lead to the success and profitability of a company. The present research examined the relationship between brand value and customer behavioral intention. Accordingly, 80 questionnaires were distributed among customers, selected through random sampling in Tehran, Iran. The obtained data were analyzed by SPSS. Based on descriptive statistics, two aspects of customer behavioral intention included “product introduction” and “repeat purchase”, while two aspects of brand equity were “brand awareness” and “product introduction”. The research findings showed that factors such as “brand awareness” and “brand loyalty” directly affect customer behavioral intention and satisfaction.

  10. A survey on important factors influencing brand equity: A case study of banking industry

    Directory of Open Access Journals (Sweden)

    Saeed Sehhat

    2013-01-01

    Full Text Available One of the most important issues in increasing customers' needs is to increase the quality of services through providing better quality services. Customer satisfaction is one of the primary requirements to meet people's needs and to have an efficient customer relationship management (CRM we need to detect the most important factors influencing efficiency and effectiveness in banking industry. In this paper, we present an empirical study to detect these factors in one of private banks in Iran. The proposed study of this paper tries to reach three objectives. We first detect important factors, which build customers' perception towards CRM, then we detect all influencing factors, which impact CRM, and finally, we evaluate the impact of CRM towards brand equity. The proposed study first designs a questionnaire and distributes it among 386 customers. Using structural equation modeling and certified factor analysis, we analyze the results. The results indicate that three factors including information, employee job behavior and suggestions and other factor have meaningful impact on customer brand equity. However, the impact of equipment on customer brand equity was not meaningful.

  11. National survey of health in the tattoo industry: Observational study of 448 French tattooists

    Directory of Open Access Journals (Sweden)

    Nicolas Kluger

    2017-02-01

    Full Text Available Objectives: The data regarding the health of professional tattooists is inexistent. Tattooists are usually heavily tattooed and exposed daily to body fluids and skin-to-skin contacts with customers, tattoo inks, solvents, allergens, irritants, and work for hours often in inadequate positions using vibrating tattoo machines. We analyzed the health status of active French professional tattooists. Material and Methods: An observational self-reported Internet survey was performed among 448 tattooists who were members of the French Tattoo Union in November 2013. Results: The main physical complaints were musculoskeletal: back pain (65%, finger pain (41.5% and muscular pain (28.8%. Finger pain, back pain, muscular pain and carpal tunnel symptoms/tingling sensations on the fingers occurred among 88%, 61.5%, 68% and 84% of the cases after having started their activity (p < 0.001. Other chronic diseases, autoimmune diseases and cancers remained at a low level here. Conclusions: Professional tattooists have a high prevalence of musculoskeletal complaints about back pain due to repetitive movements, awkward postures and use of a vibrating tattoo machine. Tattooists have a unique environment that imply developing intervention and preventive strategies for them. Int J Occup Med Environ Health 2017;30(1:111–120

  12. Analysis of baking industry. Extended energy survey reports 1984-1989

    Energy Technology Data Exchange (ETDEWEB)

    Walshe, N.M.A.

    1992-05-01

    The analysis contained in this report represents 17 Extended Energy Survey reports from bakers producing bread or flour confectionery or both. The sites involved represent around 3% of the energy use of the Food and Drink Sector in the United Kingdom and range from small master bakers to large plant bakeries employing over 700 people. No comparison of energy efficiency has been attempted since the number of similar sites in relevant groups was too small. Potential energy savings of Pound 0.74 million/annum were identified in the 17 reports. These savings were classified in two ways, by measure type and by cost. The most important measure types were energy management, boilers, heat recovery and ovens. In terms of cost of measures, 55% of the energy savings were attributable to techniques costing Pound 5k or more. Overall, all but one of the measure types yielded a payback of less than 2 years, with all 17 sites taken into account. The ratio of national benefit to Government cost for the 17 EES reports analysed would be approximately 19:1 if all recommended measures were taken up by the participating bakeries. (author).

  13. A primary liver cancer death's survey and risk factors analysis of the workers in China nuclear industry

    International Nuclear Information System (INIS)

    Bao Shouchen; Chang Xuezhang; Gao Zenglin; Xiong Jinlian; Zhang Xuzong; Zhang Zhongren

    1999-07-01

    To evaluate primary liver cancer death in the workers of China nuclear industry and to discuss the risk factors probably for making protection and cure measures, the workers of 11 units are surveyed from the time of foundation to the end of 1990 by groups, trades and sex, and the results are analyzed with the relevant physical examinations, the results in laboratory test, and some clinic epidemiological data concerned. The accumulative rough mortality is 19.20 x 10 -5 , standard mortality 10.09 x 10 -5 , the most is at the age of 35 to 54. SMR 1.00 (P > 0.05), RR value in uranium mines is 3.67 (P < 0.01) and others does not increase. The incidence of hepatomegalia and GPT rising are lower than or about 10%, while the incidence of HBsAg is lower than 8%, a middle-levelled infection in the country. And HBsAg incidence in liver cancer cases is 61.6% and chronic hepatitis in liver cancer cases is 53.4%. The liver cancer case increase in the workers in nuclear industry is not found, but significant increase is found in uranium mine workers; whereas there is no evidence that can be attributed to radiation operation, and the death risk may be considered mainly to be related to HBV infection, then chronic hepatitis or environment factors

  14. Self-reported well-being and associated factors among industrial workers in Brazil: findings from a national survey

    Directory of Open Access Journals (Sweden)

    Shana Ginar da Silva

    Full Text Available Abstract: The purpose of this study was to estimate self-perception of well-being and associated factors among industrial workers in Brazil. A cross-sectional survey was carried out with a representative sample from 23 Brazilian states and the Federal District. Self-reported of well-being was investigated by questionnaire. Multinomial logistic regression was used in unadjusted and adjusted analyses. For 93% of the 47,477 industrial workers, the perception of well-being was positive. Those who had the highest chances of being in the category of best perception of well-being were: male workers (OR = 1.35; 95%CI: 1.28; 1.43; those aged under thirty years old (OR = 1.24; 95%CI: 1.12; 1.39; those from Southern Brazil (OR = 1.99; 95%CI: 1.83; 2.16; and people with a high income. The prevalence of positive well-being was high. Sociodemographic, behavioral and social support characteristics, as well as the characteristics related to self-report on health were associated with well-being.

  15. A survey of hazardous and toxic wastes from lead and zinc industries in Zanjan province

    International Nuclear Information System (INIS)

    Khamesi, J.; Asadi, A.

    2008-01-01

    Angoran, situated in north-west of Zanjan province is unique in Middle East in respect of its rich reserves of Lead and Zinc minerals. These valuable reserves have attracted a number of Lead and Zinc industries into the province. With the absent of a proper waste management practices, a great deal of hazardous and toxic wastes are produced which contains a high percent of heavy metals that are potential sources for soil and water pollution. In this paper, after recognition of the main sources of the pollutants, the affected and vulnerable areas are mapped using Geographic Information System. The quality and quantity of these hazardous wastes are then evaluated by sampling and analyzing the samples and by taking into account the undesirable environmental conditions faced by the province, a number of preventive and curative measures for a better waste management practices are introduced. The annual wastes produced by 22 Zinc plants in the province are calculated to be about 260000 tons of filter cake leachates, 13000 tons of Cobalt filter cake, and 6550 tons of Cadmium-Nickel filter cakes. Two active Lead factories in the province are also producing about 13000 tons of slag annually. These wastes are containing 27000 ton Zinc, 9220 ton Lead, 560 ton Cadmium and 242000 tons of other wastes, that are left in open spaces within the factory or is dumped in dry riverbeds or near river valleys.The wastes are transported and deposited by wind in the environment and are washed by rain into the river systems or are soaked into the ground polluting the underground aquifers. Based of Basel Convention, these wastes are given international codes (Y 23, Y 31, Y 26, Y 46). Possession, disposal, and recycling of such wastes must be undertaken with specific management measures

  16. Evaluation of Laboratory Procedures to Quantify the Neutral Detergent Fiber Content in Forage, Concentrate, and Ruminant Feces.

    Science.gov (United States)

    Barbosa, Marcília Medrado; Detmann, Edenio; Rocha, Gabriel Cipriano; de Oliveira Franco, Marcia; de Campos Valadares Filho, Sebastião

    2015-01-01

    A comparison was made of measurements of neutral detergent fiber concentrations obtained with AOAC Method 2002.04 and modified methods using pressurized environments or direct use of industrial heat-stable α-amylase in samples of forage (n=37), concentrate (n=30), and ruminant feces (n=39). The following method modifications were tested: AOAC Method 2002.04 with replacement of the reflux apparatus with an autoclave or Ankom(220®) extractor and F57 filter bags, and AOAC Method 2002.04 with replacement of the standardization procedures for α-amylase by a single addition of industrial α-amylase [250 μL of Termamyl 2X 240 Kilo Novo Units (KNU)-T/g] prior to heating the neutral detergent solution. For the feces and forage samples, the results obtained with the modified methods with an autoclave or modification of α-amylase use were similar to those obtained using AOAC Method 2002.04, but the use of the Ankom220 extractor resulted in overestimated values. For the concentrate samples, the modified methods using an autoclave or Ankom220 extractor resulted in positive systematic errors. However, the method using industrial α-amylase resulted in systematic error and slope bias despite that the obtained values were close to those obtained with AOAC Method 2002.04.

  17. Characterization of Thermo- and Detergent Stable Antigenic Glycosylated Cysteine Protease of Euphorbia nivulia Buch.-Ham. and Evaluation of Its Ecofriendly Applications

    Directory of Open Access Journals (Sweden)

    Shamkant B. Badgujar

    2013-01-01

    Full Text Available An antigenic glycosylated cysteine protease has been purified from the latex of Euphorbia nivulia Buch.-Ham. It exhibits remarkable protease activity in the presence of metal ions, oxidizing agents, organic solvents, and detergents. This enzyme showed potential role in leather processing industry due to its dehairing activity for animal hide without hydrolyzing fibrous proteins, producing, by this way, a better quality product. The enzyme can also be used for silver recovering from X-ray plates. In addition, the stability (temperature and surfactants and hydrolysis of blood stain data also revealed its application in detergent industries. Agriculturally, this protease finds application in biocontrol process against the infectious management of root knot nematode, Meloidogyne incognita. Biologically, it shows noticeable wound healing, haemostatic and antibacterial activity.

  18. Skin symptoms in patients with atopic dermatitis using enzyme-containing detergents

    DEFF Research Database (Denmark)

    Andersen, Peter Hundevadt; Bindslev-Jensen, C; Mosbech, H

    1998-01-01

    Detergent enzymes may cause skin irritation and occasionally hypersensitivity reactions. The potential hazards of these enzymes have led some physicians to advise atopic dermatitis patients against the use of enzyme-enriched detergents. A three-phased randomised, double-blind, cross-over experiment...... was designed to question this recommendation. Each period was of 1 month's duration.In the first phase patients continued using their normal washing detergent. In phase II patients used trial detergent with or without added enzymes, and during phase III patients were given the opposite trial detergent. A total...... differences in any of the primary or secondary parameters comparing treatment and placebo periods. Our data therefore seem to exclude that atopic dermatitis may exacerbate during 1 month's exposure to enzyme-enriched detergents. Since no significant irritant capacity was detected in atopic dermatitis patients...

  19. Effects of household detergent on anaerobic fermentation of kitchen wastewater from food waste disposer.

    Science.gov (United States)

    Lee, K H; Park, K Y; Khanal, S K; Lee, J W

    2013-01-15

    This study examines the effects of household detergent on anaerobic methane fermentation of wastewater from food waste disposers (FWDs). Anaerobic toxicity assay (ATA) demonstrated that methane production substantially decreased at a higher detergent concentration. The Gompertz three-parameter model fitted well with the ATA results, and both the extent of methane production (M) and methane production rate (R(m)) obtained from the model were strongly affected by the concentration of the detergent. The 50% inhibitory concentration (IC(50)) of the detergent was 603 mg/L based on R(m). Results from fatty acid methyl esters (FAMEs) analysis of microbial culture revealed that deterioration of methane fermentation was attributed to impaired structure of anaerobic microbial membrane due to detergent. This study suggests that wastewater from FWD could be used for methane production, but it is necessary to reduce the concentration of detergent prior to anaerobic fermentation. Copyright © 2012 Elsevier B.V. All rights reserved.

  20. The Influence Of Business Partnership And Competitive Strategy On Business PerformanceA Survey On Footwear Industry In The Province Of Banten Indonesia

    OpenAIRE

    Winarjono; Sucherly; Surachman Sumawihardja

    2015-01-01

    Abstract The footwear industry in Banten Province is facing the issues of low business performance in the last five years caused by an inappropriate competitive strategy and business partnership that is not close yet. This research aims to study about business partnerships and competitive strategy on business performance of footwear industry in the Province of Banten. The study is conducted by descriptive and explanatory survey methods. The unit of analysis are companies of footwear indus...

  1. The Effect Of Additional Detergent In Crude Palm Oil In The Process Of Separation Stearin

    Science.gov (United States)

    Rezekyah Hasibuan, Vina; aini, Nur; Febriyanti; Ayubi Pane, Salahudin Al

    2018-03-01

    This study aims to find out how much stearin is formed from the addition of detergent and to understand the process of separation of crude olein with crude stearin from raw material of crude palm oil (CPO). Using a detergent fractionation system, detergent fractionation is a continuous crystallization of oil with controlled cooling and the separation of fractions by weight or centrifuge after supplementing surfactant.

  2. The Effect of Detergents on the Morphology and Immunomodulatory Activity of Malassezia furfur.

    Science.gov (United States)

    Kim, Su-Han; Ko, Hyun-Chang; Kim, Moon-Bum; Kwon, Kyung-Sool; Oh, Chang-Keun

    2009-05-01

    Several workers have found that Malassezia are capable of suppressing cytokine release and downregulating the phagocytic function of monocytes. But lipid-depleted Malassezia furfur (M. furfur) extracts have also been shown to induce increased production of TNF-alpha, IL-6 and IL-1beta in monocytes. We thought that the detergents in shampoos or soaps could change the composition of the lipid in the M. furfur cell wall. We studied whether detergents affect the morphology of M. furfur and if the inflammatory cytokine profiles change in the monocytes treated with detergent-treated M. furfur. Commonly used detergents such as sodium lauryl sulfate, ammonium lauryl sulfate and tween-80 were respectively added to the modified Leeming-Notman's media. M. furfur was cultivated in each media (detergent-added or untreated). Thereafter, the surface morphology of the yeast was evaluated by scanning and transmission electron microscopy. The cytokine profiles of monocytes, which were treated by M. furfur with or without detergents, were also evaluated. The detergent-treated M. furfur were similar to the lipid-extracted form of M. furfur on the electron microscopic study, with a recessed, withered surface and with thinner and rather electron transparent cell walls than the detergent-untreated M. furfur. The levels of TNF-alpha were higher in monocytes treated with detergent-treated Malassezia than that in the monocytes treated with the detergent-untreated Malassezia (pdetergents in shampoos or soaps affect the lipid layers of the Malassezia cell wall and these lipid-extracted Malassezia induce or aggravate some inflammatory conditions. But to correlate the relationship between detergents and Malassezia-associated diseases, in vivo experiments that will focus on short-term contact with detergents in real life conditions should be done.

  3. Allergic contact dermatitis due to nickel in household detergent

    Directory of Open Access Journals (Sweden)

    Dewi Utami Putri

    2017-12-01

    Full Text Available Allergic contact dermatitis (ACD is a cutaneous inflammatory reaction caused by contact with specific exogenous allergen to which a person has developed allergic sensitization. Nickel was reported as one of the most common causes of ACD worldwide, particularly affecting females. It is associated with a variety of nickel-containing products, from jewelry to detergent. A 32-year-old female was presented with pruritic eruption consist of erythematous papules and vesicles on both hands and extensor forearms since 2 weeks before admission. The patient is a housewife who did handwashing clothes and kitchenware with detergent and soap every day. At first, there were erythematous papules on the right extensor forearm, then the patient wore rubber gloves to protect hands when washing. However, the lesions spread to the left extensor forearm and there were also vesicles on both hands. There was history of localized reactions to metal items, the latter one was 3 weeks ago after wearing a metal necklace. The clinical presentation were multiple erythematous papules and vesicles, erythematous and hyperpigmented macules. The patch test using Chemotechnique Diagnostics AB and square chamber showed a 2+ reaction to nickel sulfate. The patient was educated to avoid the causative allergen and treated with oral antihistamine and topical corticosteroid. The patient showed significant clinical improvement after 2 weeks. Nickel as metal catalyst used in detergents is found in small concentration, but can lead to ACD in an already sensitized individual.The lesions persist despite the use of gloves because nickel is absorbed through rubber materia

  4. Cost reductions on a site producing soap and detergents

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, R.W. (UKAEA Harwell Lab. (UK). Energy Technology Div.)

    1986-05-01

    The company, which is a subsidiary of the multinational Procter and Gamble Company, manufactures soap and detergent products at two UK sites. A process integration study of the West Thurrock site was undertaken with the help of the Energy and Process Integration Service (EPI). This organisation offers a specialist process integration consultancy service. The study cost around Pound 45,000, including consultancy fees and Procter and Gamble staff time. It was completed in 12 months. The study established that the consumption of process energy could be reduced by around 25% if the site was fully integrated. (author).

  5. Understanding Detergent Effects on Lipid Membranes: A Model Study of Lysolipids

    DEFF Research Database (Denmark)

    Henriksen, Jonas Rosager; Andresen, Thomas Lars; Feldborg, Lise Nørkjær

    2010-01-01

    Lysolipids and fatty acids are the natural products formed by the hydrolysis of phospholipids. Lysolipids and fatty acids form micelles in solution and acts as detergents in the presence of lipid membranes. In this study, we investigate the detergent strength of a homologous series of lyso......-chain mismatch between LPC and POPC determines the magnitude of the membrane mechanical perturbation per LPC molecule in the membrane. Finally, the three-stage model describing detergent membrane interaction has been extended by a parameter D-MCI, which governs the membrane curvature stability in the detergent...

  6. Particle size control of detergents in mixed flow spray dryers

    Directory of Open Access Journals (Sweden)

    Mark Jonathan Crosby

    2015-03-01

    Full Text Available Particle size is a key quality parameter of a powder detergent as it determines its performance, the bulk density and the look and feel of the product. Consequently, it is essential that particle size is controlled to ensure the consistency of performance when comparing new formulations. The majority of study reported in the literature relating to particle size control, focuses on the spray produced by the atomisation technique. One approach advocated to achieve particle size control is the manipulation of the ratio of the mass slurry rate and mass flow rate of gas used for atomisation. Within this study, ratio control was compared with an automatic cascade loop approach using online measurements of the powder particle size on a small-scale pilot plant. It was concluded that cascade control of the mean particle size, based on manipulating the mass flow rate of gas, resulted in tighter, more responsive control. The effect of a ratio change varied with different formulations and different slurry rates. Furthermore, changes in slurry rate caused complications, as the impact on particle size growth in the dryer is non-linear and difficult to predict. The cascade loop enables further study into the effect of particle size on detergent performance.

  7. Employee Perception of the Impact of Information Technology Investment in Organisations: a survey of the hotel industry

    Directory of Open Access Journals (Sweden)

    Bruce Lo

    2000-05-01

    Full Text Available To improve their operational efficiency and to maintain their competitiveness in the market place many organisations continue to invest substantially in their Information Technology (IT capability. But how do the employees themselves view the impact and the value of IT investment? This paper considers this question in the context of the hospitality industry. More specifically, it investigates the different perception of hotel employees on the impact of organisational IT investment on (a IT usage by employees, (b employee satisfaction with the IT systems, (c changes in the level of employee performance, and (d organisational performance of the hotel. 945 hotel employees in Bali, Indonesia were surveyed to assess their perception of the organisational impact of IT. Factor analysis, analysis of variance and regression analysis were performed on the data to examine the' range of employee viewpoints. Results showed that there were significant differences among the employees' perception with respect to age, educational level, position in the hotel, and individual income. These findings suggest that even senior management may regard the investment in IT is worthwhile, there may be a divergence of opinion among the employees as to what are the real benefits of IT. In order to fully leverage the potential of their IT investment, managers should pay particular attention to shaping the views of the employees who ultimately determine whether the IT capabilities in an organisation are put to use.

  8. An Overview of the Top Ten Detergents Used for Membrane Protein Crystallization

    NARCIS (Netherlands)

    Stetsenko, Artem; Guskov, Albert

    2017-01-01

    To study integral membrane proteins, one has to extract them from the membrane—the step that is typically achieved by the application of detergents. In this mini-review, we summarize the top 10 detergents used for the structural analysis of membrane proteins based on the published results. The aim

  9. Influence of detergents on the activity of the ABC transporter LmrA

    NARCIS (Netherlands)

    Infed, Nacera; Hanekop, Nils; Driessen, Arnold J. M.; Smits, Sander H. J.; Schmitt, Lutz

    The ABC transporter LmrA from Lactococcus lactis has been intensively studied and a role in multidrug resistance was proposed. Here, we performed a comprehensive detergent screen to analyze the impact of detergents for a successful solubilization, purification and retention of functional properties

  10. Irritancy ranking of anionic detergents using one-time occlusive, repeated occlusive and repeated open tests

    NARCIS (Netherlands)

    Tupker, RA; Bunte, EE; Fidler, [No Value; Wiechers, JW; Coenraads, PJ

    Discrepancies between the one-time patch test and the wash test regarding the ranking of irritancy of detergents have been found in the literature. The aim of the present study was to investigate the concordance of irritancy rank order of 4 anionic detergents tested by 3 different exposure methods,

  11. Extraction of peptide tagged cutinase in detergent-based aqueous two-phase systems

    NARCIS (Netherlands)

    Rodenbrock, A.; Selber, K.; Egmond, M.R.; Kula, M.-R.

    2010-01-01

    Detergent-based aqueous two-phase systems have the advantage to require only one auxiliary chemical to induce phase separation above the cloud point. In a systematic study the efficiency of tryptophan-rich peptide tags was investigated to enhance the partitioning of an enzyme to the detergent-rich

  12. Oils used in microbatch crystallization do not remove a detergent from the drops they cover

    NARCIS (Netherlands)

    Barends, TRM; Dijkstra, BW; Barends, Thomas R.M.; Dijkstra, Bauke W.

    2003-01-01

    In microbatch crystallizations, a small volume of protein solution is placed in contact with a large volume of oil. Detergents present in the water phase may be expected to migrate into the oil phase, which could have effects on the protein in solution. A new method is described in which detergent

  13. Efficacy of Detergent and Water Versus Bleach for the Disinfection of Direct Contact Ophthalmic Lenses

    Science.gov (United States)

    Abbey, Ashkan M.; Gregori, Ninel Z.; Surapaneni, Krishna; Miller, Darlene

    2014-01-01

    Purpose While manufacturers recommend cleaning ophthalmic lenses with detergent and water and then a specific disinfectant, disinfectants are rarely used in ophthalmic practices. The aim of this pilot study was to evaluate the efficacy of detergent and water versus bleach, a recommended disinfectant, to eliminate common ocular bacteria and viruses from ophthalmic lenses. Methods Three bacterial strains (Staphylococcus epidermidis, Corynebacterium straitum, and methicillin-resistant Staphylococcus aureus (MRSA) and two viral strains (adenovirus and herpes simplex virus (HSV) type-1) were individually inoculated to 20 gonioscopy and laser lenses. Lenses were washed with detergent and water and then disinfected with 10% bleach. All lenses were cultured after inoculation, after detergent and water, and after the bleach. Bacterial cultures in thioglycollate broth were observed for 3 weeks and viral cultures for 2 weeks. The presence of viruses was also detected by multiplex polymerase chain reaction (PCR). Results All 20 lenses inoculated with Staphylococcus epidermidis, Corynebacterium straitum, adenovirus, and HSV-1 showed growth after inoculation, but no growth after detergent/water and after the bleach. All lenses showed positive HSV and adenovirus PCR after inoculation and negative PCR after detergent/water and after bleach. All MRSA contaminated lenses showed growth after inoculation and no growth after detergent and water. However, one lens showed positive growth after bleach. Conclusions Cleaning with detergent and water appeared to effectively eliminate bacteria and viruses from the surface of contaminated ophthalmic lenses. Further studies are warranted to design practical disinfection protocols that minimize lens damage. PMID:24747806

  14. Evaluation of Liquid Detergents and Methods Used for Airfield Rubber Removal

    Science.gov (United States)

    2012-07-31

    friction. Each detergent is applied to the pavement surface in controlled 50’ x 30’ patches. There were three patches placed for each detergent with...Measurements ..........................................................................................................16 6.3. Periodic Pavement Wetting...19 Figure 14. Pre-Cleaning Micro -Texture Data Graph (GT View Data

  15. 40 CFR 180.1022 - Iodine-detergent complex; exemption from the requirement of a tolerance.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Iodine-detergent complex; exemption... FOOD Exemptions From Tolerances § 180.1022 Iodine-detergent complex; exemption from the requirement of a tolerance. The aqueous solution of hydriodic acid and elemental iodine, including one or both of...

  16. Irritancy potential of 17 detergents used commonly by the Indian household

    Directory of Open Access Journals (Sweden)

    Austoria A

    2010-01-01

    Full Text Available Background: Detergents are used by almost every household in the developed and developing world. Soap and most detergents are anionic surfactants and attack the horny layer of the skin and increase its permeability with little or no inflammatory change and may result in hand eczema, which is very distressing and incapacitating. Aim: To evaluate the irritant potential of common household detergents (laundry and dish wash used by the Indian population using a 24-hour patch test and to convincingly educate the patients on the detergents less likely to cause irritation in the particular individual. Methods: Seventeen commonly used detergents found in Indian market were included in the study, of which, 12 were laundry detergents (powders - seven, bar soap - five and five were dish wash detergents (powder - one, liquid - one, bar soap - three. The irritant potential of the 17 detergents were evaluated in 30 volunteers. Thirty microliters of each of the detergent bar solutions, distilled water (negative control, and 20% SDS (positive control were applied to Finn chambers with a micropipette and occluded for 24 hours. Erythema, scaling, and edema were graded in comparison to the reaction at the negative control site (distilled water for each volunteer separately. The scoring of erythema / dryness and wrinkling on a 0 - 4 point scale and edema on another 0 - 4 point scale was based on the Draize scale. The pH of each of the detergent solutions was determined using litmus papers (Indikrom papers from Qualigens fine chemicals. Results: The difference between detergents (F value was significant for erythema / dryness and wrinkling (F = 3.374; p = 0.000, but not significant for edema (F = 1.297; p = 0.194. [Table 2] lists the means for erythema / dryness and wrinkling, and edema. The F value of the totals of the means for erythema / dryness and wrinkling and edema was significant (F = 2.495; p = 0.001. The pH of all the detergents was found to be alkaline

  17. Structure formation in binary mixtures of lipids and detergents: self-assembly and vesicle division.

    Science.gov (United States)

    Noguchi, Hiroshi

    2013-01-14

    Self-assembly dynamics in binary surfactant mixtures and structure changes of lipid vesicles induced by detergent solution are studied using coarse-grained molecular simulations. Disk-shaped micelles, the bicelles, are stabilized by detergents surrounding the rim of a bilayer disk of lipids. The self-assembled bicelles are considerably smaller than bicelles formed from vesicle rupture, and their size is determined by the concentrations of lipids and detergents and the interactions between the two species. The detergent-adsorption induces spontaneous curvature of the vesicle bilayer and results in vesicle division into two vesicles or vesicle rupture into worm-like micelles. The division occurs mainly via the inverse pathway of the modified stalk model. For large spontaneous curvature of the monolayers of the detergents, a pore is often opened, thereby leading to vesicle division or worm-like micelle formation.

  18. Determination of Anionic Detergent Concentration of Karasu Stream in Sinop (Turkey

    Directory of Open Access Journals (Sweden)

    Ayşe Gündoğdu

    2018-02-01

    Full Text Available The study was achieved between May 2014 and April 2015 at the Karasu Creek located in the province of Sinop. It was conducted to determine anionic detergent pollution and some physicochemical properties (pH, temperature, conductivity, salinity, dissolved oxygen, total hardness, chemical oxygen demand, phosphate PO4-3, total nitrogen. The anionic detergent concentration of the stations was determined on a monthly basis. Seasonally averaged values of the anionic detergent was measured as the highest value in the autumn season. The lowest values of anionic detergent were found in stations in winter and spring. The increase in the concentration of anionic detergent is caused by population growth in residential areas, increased agricultural activities and rains, and that chemicals move to riverbed from terrestrial areas with rain water.

  19. Hearing difficulty attributable to employment by industry and occupation: an analysis of the National Health Interview Survey--United States, 1997 to 2003.

    Science.gov (United States)

    Tak, SangWoo; Calvert, Geoffrey M

    2008-01-01

    To estimate the national burden of hearing difficulty among workers in US industries and occupations. Data on 130,102 employed National Health Interview Survey respondents between the ages of 18 to 65 years who were interviewed between 1997 and 2003 were analyzed to estimate the population prevalence, adjusted prevalence ratios, and fractions of hearing difficulty attributable to employment. The estimated population prevalence of hearing difficulty was 11.4% (24% attributable to employment). The adjusted prevalence ratios of hearing difficulty were highest for railroads, mining, and primary metal manufacturing industry. Occupations with increased risk of hearing difficulty were mechanics/repairers, machine operators, and transportation equipment operators. Hearing difficulty was differentially distributed across various industries. In industries with high rates, employers and workers should take preventive action to reduce the risk of occupational hearing loss.

  20. Best Manufacturing Practices: Report of Survey Conducted at Headquarters, U.S. Army Industrial Operations Command, ROck Island, IL

    National Research Council Canada - National Science Library

    Renner, Ernie

    1997-01-01

    This report was produced by the Best Manufacturing Practices (BMP) program, a unique industry and government cooperative technology transfer effort that improves the competitiveness of America's industrial base both here and abroad...

  1. Production of membrane proteins without cells or detergents.

    Science.gov (United States)

    Rajesh, Sundaresan; Knowles, Timothy; Overduin, Michael

    2011-04-30

    The production of membrane proteins in cellular systems is besieged by several problems due to their hydrophobic nature which often causes misfolding, protein aggregation and cytotoxicity, resulting in poor yields of stable proteins. Cell-free expression has emerged as one of the most versatile alternatives for circumventing these obstacles by producing membrane proteins directly into designed hydrophobic environments. Efficient optimisation of expression and solubilisation conditions using a variety of detergents, membrane mimetics and lipids has yielded structurally and functionally intact membrane proteins, with yields several fold above the levels possible from cell-based systems. Here we review recently developed techniques available to produce functional membrane proteins, and discuss amphipols, nanodisc and styrene maleic acid lipid particle (SMALP) technologies that can be exploited alongside cell-free expression of membrane proteins. Copyright © 2010 Elsevier B.V. All rights reserved.

  2. Utilization of acid pre-treated coconut dregs as a substrate for production of detergent compatible lipase by Bacillus stratosphericus.

    Science.gov (United States)

    Mohd Zin, Nur Bainun; Mohamad Yusof, Busyra; Oslan, Siti Nurbaya; Wasoh, Helmi; Tan, Joo Shun; Ariff, Arbakariya B; Halim, Murni

    2017-12-01

    In recent years, many efforts have been directed to explore the methods to reduce the production costs of industrial lipase by improving the yield and the use of low-cost agricultural wastes. Coconut dregs, which is a lignocellulosic by-product from coconut oil and milk processing plants, is rich in cellulose (36%) and crude fat (9%). A newly isolated Bacillus stratosphericus has been demonstrated to perform cellulose hydrolysis on coconut dregs producing fermentable sugars. The highest extracellular lipase activity of 140 U/mL has been achieved in submerged fermentation with acid pre-treated coconut dregs. The lipase was found to be active over a wide range of temperatures and pHs. The activity of lipase can be generally increased by the presence of detergent ingredients such as Tween-80, cetyltrimethylammonium bromide, hydrogen peroxide and phosphate per sulphate. The great compatibility of lipase in commercial detergents has also underlined its potential as an additive ingredient in biodetergent formulations.

  3. A Survey on the status of Marine IT Industrial environment for e-navigation SQA – focusing on Korean domestic companies

    Directory of Open Access Journals (Sweden)

    Hyoseung Kim

    2016-12-01

    The questionnaire is composed of two parts. The first part mainly deals with fundamental knowledge about the scale of the company and the number of development teams s. The second part consists of three sub-parts with Quality Management, Configuration Management, and Process Management. Otherwise, several questions are surveyed with respect to engineering tools for SQA and education support. Approximately 150 cases were gathered. The outcome of the survey shows some points that both of industry and government can contemplate for the future.

  4. Detergents: Friends not foes for high-performance membrane proteomics toward precision medicine.

    Science.gov (United States)

    Zhang, Xi

    2017-02-01

    Precision medicine, particularly therapeutics, emphasizes the atomic-precise, dynamic, and systems visualization of human membrane proteins and their endogenous modifiers. For years, bottom-up proteomics has grappled with removing and avoiding detergents, yet faltered at the therapeutic-pivotal membrane proteins, which have been tackled by classical approaches and are known for decades refractory to single-phase aqueous or organic denaturants. Hydrophobicity and aggregation commonly challenge tissue and cell lysates, biofluids, and enriched samples. Frequently, expected membrane proteins and peptides are not identified by shotgun bottom-up proteomics, let alone robust quantitation. This review argues the cause of this proteomic crisis is not detergents per se, but the choice of detergents. Recently, inclusion of compatible detergents for membrane protein extraction and digestion has revealed stark improvements in both quantitative and structural proteomics. This review analyzes detergent properties behind recent proteomic advances, and proposes that rational use of detergents may reconcile outstanding membrane proteomics dilemmas, enabling ultradeep coverage and minimal artifacts for robust protein and endogenous PTM measurements. The simplicity of detergent tools confers bottom-up membrane proteomics the sophistication toward precision medicine. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Enhanced detergent extraction for analysis of membrane proteomes by two-dimensional gel electrophoresis

    Directory of Open Access Journals (Sweden)

    Hsu Kimberly K

    2005-06-01

    Full Text Available Abstract Background The analysis of hydrophobic membrane proteins by two-dimensional gel electrophoresis has long been hampered by the concept of inherent difficulty due to solubility issues. We have optimized extraction protocols by varying the detergent composition of the solubilization buffer with a variety of commercially available non-ionic and zwitterionic detergents and detergent-like phospholipids. Results After initial analyses by one-dimensional SDS-PAGE, quantitative two-dimensional analyses of human erythrocyte membranes, mouse liver membranes, and mouse brain membranes, extracted with buffers that included the zwitterionic detergent MEGA 10 (decanoyl-N-methylglucamide and the zwitterionic lipid LPC (1-lauroyl lysophosphatidylcholine, showed selective improvement over extraction with the common 2-DE detergent CHAPS (3 [(3-cholamidopropyldimethylammonio]-1-propanesulfonate. Mixtures of the three detergents showed additive improvements in spot number, density, and resolution. Substantial improvements in the analysis of a brain membrane proteome were observed. Conclusion This study demonstrates that an optimized detergent mix, coupled with rigorous sample handling and electrophoretic protocols, enables simple and effective analysis of membrane proteomes using two-dimensional electrophoresis.

  6. Decontamination factor of the commercial detergents for the skin (part 3)

    Energy Technology Data Exchange (ETDEWEB)

    Miyabe, Kenjiro; Takasaki, Koji [Japan Nuclear Cycle Development Inst., Tokai, Ibaraki (Japan); Yasunaka, Hideo; Izumi, Yuichi [Japan Environment Research Corporation, Tokyo (Japan)

    2000-08-01

    The commercial detergents, which are cleansing cream, shampoo, neutral detergent, etc., were examined in order to select the body cleaners that are substitutes for the titanium dioxide paste. JNC entrusted Japan Environment Research Corporation Limited with these examinations since 1997. In 1997 and 1998, the commercial detergents were examined for Ce-144, Cs-137 and Ru-106. In 1999, 22 detergents were examined for Co-60 from the result of the past examinations. In this examination, the radioactive solution of Co-60 was dropped on the pig-skin samples. These samples were washed with each detergent after 5 minutes and 40 minutes. The decontamination factors of detergents were estimated by the radioactive ratio of the samples before and after washing. As a result of this examination, the decontamination factors for Co-60 was the same as the decontamination factors for Ce-144 and Cs-137, and 11 detergents were nominated as the cleaner that have the decontamination factor more than that of titanium dioxide paste. (author)

  7. FUTURE SCOPE OF WOMEN CARRIER IN THE PRINTING INDUSTRY: THE CHALLENGES OF WOMEN IN PRINTING OGANIZATIONS (A SURVEY OF TWENTY FIVE COMPANIES "SMALL, MEDIUM AND LARGE PRINTING ORGANIZATION" IN AREA "NCR DELHI AND HISAR, HR".)

    OpenAIRE

    Mr. Azad Singh*

    2017-01-01

    Women carrier in printing organization today, printing industry is growing with an expositional rate & required skills manpower. In this survey based paper to getting recruit of women 10%small, 30%medium and 60% large scale print industry. Objective of this paper is too filled out manpower skills printing industries are seaking in B.Tech women printing students to bridge the gap between skills and required in printing organization. A survey 25 companies was carried out. the result indicated t...

  8. FY 1998 survey report. Industrial technology history/succession survey (Survey of originality and creativity of machinery technology of the Japanese industry); 1998 nendo chosa hokokusho. Sangyo gijutsu rekishi keisho chosa (kokunai sangyo kikai gijutsu no dokusosei to sozosei no chosahen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    From a viewpoint of long-term development/creative R and D promotion of the industrial technology of Japan, this survey clarifies where there are originality/creativity for technological innovations of Japan and contributes to selecting future technical themes and working out developmental methods. Aiming at succeeding to the industrial technology, this report arranges the results of the examinational research on machinery technology legacy conducted in FY 1998. The total number of registration is 530. The items of classification are as follows: machine tool (cutting processing, plastic processing), power/energy machine (external combustion engine, internal combustion engine, fluid machine, generator/motor), traffic machine (automobile, rolling stock, ship, aircraft, bicycle), industrial machine 1 (iron/steel-making machine, casting machine, mining machine, food producing machine, woodworking machine, textile machine, paper-making machine, printing machine, chemical machine), industrial machine 2 (agriculture/forestry/fisheries machine, civil engineering/construction machine, medical machine, ceramics machine), measuring device/experimental equipment (measuring device, experimental device, design device, machine watch/calculator), machine structure (plant, bridge), etc. (NEDO)

  9. Dependence of micelle size and shape on detergent alkyl chain length and head group.

    Directory of Open Access Journals (Sweden)

    Ryan C Oliver

    Full Text Available Micelle-forming detergents provide an amphipathic environment that can mimic lipid bilayers and are important tools for solubilizing membrane proteins for functional and structural investigations in vitro. However, the formation of a soluble protein-detergent complex (PDC currently relies on empirical screening of detergents, and a stable and functional PDC is often not obtained. To provide a foundation for systematic comparisons between the properties of the detergent micelle and the resulting PDC, a comprehensive set of detergents commonly used for membrane protein studies are systematically investigated. Using small-angle X-ray scattering (SAXS, micelle shapes and sizes are determined for phosphocholines with 10, 12, and 14 alkyl carbons, glucosides with 8, 9, and 10 alkyl carbons, maltosides with 8, 10, and 12 alkyl carbons, and lysophosphatidyl glycerols with 14 and 16 alkyl carbons. The SAXS profiles are well described by two-component ellipsoid models, with an electron rich outer shell corresponding to the detergent head groups and a less electron dense hydrophobic core composed of the alkyl chains. The minor axis of the elliptical micelle core from these models is constrained by the length of the alkyl chain, and increases by 1.2-1.5 Å per carbon addition to the alkyl chain. The major elliptical axis also increases with chain length; however, the ellipticity remains approximately constant for each detergent series. In addition, the aggregation number of these detergents increases by ∼16 monomers per micelle for each alkyl carbon added. The data provide a comprehensive view of the determinants of micelle shape and size and provide a baseline for correlating micelle properties with protein-detergent interactions.

  10. Treatment of wastewater contaminated with detergents and mineral oils using effective and scalable technology.

    Science.gov (United States)

    Abdelmoez, Wael; Barakat, Nasser A M; Moaz, Asmaa

    2013-01-01

    In this work, effective, cheap and scalable methodology is introduced to treat oily wastewater. The water produced from car-wash processes was utilized as a model because it has various pollutants - oil, lubricants, detergents, solid particles, etc. The results showed that the turbidity and chemical oxygen demand (COD) values dramatically decrease by using the proposed treatment process, which consists of coagulation, flocculation, sand filtration, and oxidation followed by sand as well as activated carbon filtration. Moreover, the operating conditions were optimized. Without adjustment of the pH value of car-wash wastewater, it was found that 200 ppm of ferric chloride, as a coagulant, and 1 ppm of potassium permanganate, as an oxidant, are the optimum doses. The COD and turbidity values of the final treated wastewater were reduced by almost 88 and 100%, respectively. A prototype with 15 L capacity was designed and fabricated to investigate the scaling up and continuity of the proposed treatment strategy. The results were very promising and indicated that the introduced methodology can be industrially applied.

  11. Streptomyces flavogriseus HS1: isolation and characterization of extracellular proteases and their compatibility with laundry detergents.

    Science.gov (United States)

    Ghorbel, Sofiane; Kammoun, Maher; Soltana, Hala; Nasri, Moncef; Hmidet, Noomen

    2014-01-01

    The present study describes the isolation of a new protease producing Streptomyces strain HS1 and the biochemical characterization of the secreted proteases. By sequencing of its noted 16S rDNA, HS1 strain was found to have a 100% identity with Streptomyces flavogriseus. The highest protease production was found using FermII media. In these conditions maximum protease production (99 U/mL) was obtained after 96 h incubation at 30°C and 150 rpm. HS1 strain produced at least five proteases as revealed by zymogram technique. The enzyme preparation exhibited activity over a broad range of pH (5-11) and temperature (25-70°C). Optimum activity was observed at a pH of 7.0 and a temperature of 50°C. Proteolytic activity was significantly unaffected by Ca(2+) and Mg(2+). EDTA and PMSF highly decreased the original activity. The crude extracellular proteases showed high stability when used as a detergent additive. These properties offer an interesting potential for enzymatic hydrolysis at the industrial level.

  12. Industrial relations and works councils in the Netherlands—Results from interviews and a survey among HR managers

    NARCIS (Netherlands)

    Nauta, A.; Euwema, M.; Muduate, L.; Elgoibar, P.; Pender, E.; Belén García, A.

    2015-01-01

    The Netherlands has highly institutionalized industrial and employment relations, as is illustrated by the so-called Dutch ‘Building of employment relations’, in which the works council plays an important role. Although Dutch industrial and employment relations are quite peaceful—very few strikes—a

  13. The population impact of smoke-free workplace and hospitality industry legislation on smoking behaviour. Findings from a national population survey.

    Science.gov (United States)

    Nagelhout, Gera E; Willemsen, Marc C; de Vries, Hein

    2011-04-01

    To study the impact of implementing smoke-free workplace and hospitality industry legislation on smoking behaviour. A cross-sectional population survey from 2001 to 2008 (n ≈ 18,000 per year) was used to assess trends and seasonal patterns in smoking and quitting, and to examine whether changes could be observed after the workplace smoking ban in the Netherlands in 2004 and the hospitality industry ban in 2008. Outcome measures were smoking prevalence, quit attempts and successful quit attempts. Interactions with educational level (socio-economic status) and bar visiting (exposure to the hospitality industry ban) were tested. The workplace ban was followed by a decrease in smoking prevalence (OR = 0.91, P hospitality industry ban was not (OR = 0.96, P = 0.127). Both bans, especially the workplace ban, were followed by an increase in quit attempts and successful quit attempts: workplace ban, OR = 1.31, P hospitality industry ban, OR = 1.13, P = 0.013; OR = 1.44, P hospitality industry ban had a larger effect on quit attempts among frequent bar visitors (OR = 1.48, P = 0.003) than on non-bar visitors (OR = 0.71, P = 0.014). A workplace smoking ban in the Netherlands was followed by more changes in smoking and quitting than a hospitality industry ban. The hospitality industry ban only appeared to have an impact on quit attempts, and not on smoking prevalence. © 2010 The Authors, Addiction © 2010 Society for the Study of Addiction.

  14. Designer lipid-like peptides: a class of detergents for studying functional olfactory receptors using commercial cell-free systems.

    Science.gov (United States)

    Corin, Karolina; Baaske, Philipp; Ravel, Deepali B; Song, Junyao; Brown, Emily; Wang, Xiaoqiang; Wienken, Christoph J; Jerabek-Willemsen, Moran; Duhr, Stefan; Luo, Yuan; Braun, Dieter; Zhang, Shuguang

    2011-01-01

    A crucial bottleneck in membrane protein studies, particularly G-protein coupled receptors, is the notorious difficulty of finding an optimal detergent that can solubilize them and maintain their stability and function. Here we report rapid production of 12 unique mammalian olfactory receptors using short designer lipid-like peptides as detergents. The peptides were able to solubilize and stabilize each receptor. Circular dichroism showed that the purified olfactory receptors had alpha-helical secondary structures. Microscale thermophoresis suggested that the receptors were functional and bound their odorants. Blot intensity measurements indicated that milligram quantities of each olfactory receptor could be produced with at least one peptide detergent. The peptide detergents' capability was comparable to that of the detergent Brij-35. The ability of 10 peptide detergents to functionally solubilize 12 olfactory receptors demonstrates their usefulness as a new class of detergents for olfactory receptors, and possibly other G-protein coupled receptors and membrane proteins.

  15. Designer lipid-like peptides: a class of detergents for studying functional olfactory receptors using commercial cell-free systems.

    Directory of Open Access Journals (Sweden)

    Karolina Corin

    Full Text Available A crucial bottleneck in membrane protein studies, particularly G-protein coupled receptors, is the notorious difficulty of finding an optimal detergent that can solubilize them and maintain their stability and function. Here we report rapid production of 12 unique mammalian olfactory receptors using short designer lipid-like peptides as detergents. The peptides were able to solubilize and stabilize each receptor. Circular dichroism showed that the purified olfactory receptors had alpha-helical secondary structures. Microscale thermophoresis suggested that the receptors were functional and bound their odorants. Blot intensity measurements indicated that milligram quantities of each olfactory receptor could be produced with at least one peptide detergent. The peptide detergents' capability was comparable to that of the detergent Brij-35. The ability of 10 peptide detergents to functionally solubilize 12 olfactory receptors demonstrates their usefulness as a new class of detergents for olfactory receptors, and possibly other G-protein coupled receptors and membrane proteins.

  16. Improved catalytic efficiency, thermophilicity, anti-salt and detergent tolerance of keratinase KerSMD by partially truncation of PPC domain.

    Science.gov (United States)

    Fang, Zhen; Zhang, Juan; Du, Guocheng; Chen, Jian

    2016-06-14

    The keratinase from Stenotrophomonas maltophilia (KerSMD) is known for its high activity and pH stability in keratin degradation. However, catalytic efficiency and detergent tolerability need to be improved in order to be used for industrial application. In this work, we obtained several keratinase variants with enhanced catalytic efficiency, thermophilicity, and anti-salt and detergent tolerability by partially truncating the PPC domain of KerSMD. The variants all showed improved catalytic efficiency to synthetic substrate AAPF, with the V355 variant having the highest kcat /Km value of 143.6 s(-1) mM(-1). The truncation of keratinase had little effect on alkaline stability but obviously decreased collagenase activity, developing its potential application in leather treatment. The variants V380, V370, and V355 were thermophilic, with a 1.7-fold enhancement of keratinlytic activity at 60 °C when compared to the wild type. The entire truncation of PPC domain obtained the variant V355 with improved tolerance to alkalinity, salt, chaotropic agents, and detergents. The V355 variant showed more than a 40% improvement in activity under 15% (w/v) NaCl or 4% (w/v) SDS solution, showing excellent stability under harsh washing and unhairing conditions. Our work investigated how protein engineering affects the function of PPC domain of KerSMD.

  17. Cow dung: a potential biomass substrate for the production of detergent-stable dehairing protease by alkaliphilic Bacillus subtilis strain VV.

    Science.gov (United States)

    Vijayaraghavan, Ponnuswamy; Vijayan, Aija; Arun, Arumugaperumal; Jenisha, John Kennady; Vincent, Samuel Gnana Prakash

    2012-01-01

    Cow dung, a cheap and easily available source of energy, was used as the substrate for the production of alkaline protease by solid-state fermentation using the Bacillus subtilis strain VV. In order to achieve the maximum yield of this enzyme, the following optimum process parameters are needed: fermentation period (72 h), pH (10.0), moisture content (140%), inoculum (25%), temperature (30-40°C), carbon source (2% (w/w) maltose) and nitrogen source (1% (w/w) urea). The protease was stable over a broad temperature range (30-50°C) and pH (8.0-10.0), with maximum activity at 50°C and pH 10.0. Among the divalent ions tested, Ca(2+) (0.01 M) increased enzyme activity. The purified protease, after being subjected to sodium dodecyl sulphate-polyacrylamide gel electrophoresis, was found to have a molecular mass of 38.5 kDa. The enzyme was solvent-and surfactant-stable and showed activity even after 24 h incubation along with various commercially available detergents. This enzyme possessed dehairing properties for animal hide after 16 h of incubation at room temperature. From these results it is evident that cow dung is a potential substrate for the production of a detergent-stable, dehairing protease by B. subtilis. This enzyme has a lot of potential applications in the detergent and leather-processing industries.

  18. Molecular Dynamics Studies of Overbased Detergents on a Water Surface.

    Science.gov (United States)

    Bodnarchuk, M S; Dini, D; Heyes, D M; Breakspear, A; Chahine, S

    2017-07-25

    Molecular dynamics (MD) simulations are reported of model overbased detergent nanoparticles on a model water surface which mimic their behavior on a Langmuir trough or large water droplet in engine oil. The simulations predict that the structure of the nanoparticle on a water surface is different to when it is immersed in a bulk hydrophobic solvent. The surfactant tails are partly directed out of the water, while the carbonate core maximizes its extent of contact with the water. Umbrella sampling calculations of the potential of mean force between two particles showed that they are associated with varying degrees with a maximum binding free energy of ca. 10 k B T for the salicylate stabilized particle, ca. 8 k B T for a sulfurized alkyl phenate stabilized particle, and ca. 5 k B T for a sulfonate stabilized particle. The differences in the strength of attraction depend on the proximity of nearest approach and the energy penalty associated with the disruption of the hydration shell of water molecules around the calcium carbonate core when the two particles approach. This is greatest for the sulfonate particle, which partially loses the surfactant ions to the solution, and least for the salicylate, which forms the weakest water "cage". The particles are separated by a water hydration layer, even at the point of closest approach.

  19. FY 1999 report on the survey of the history/inheritance of industrial technology. Survey of the inheritance/education of technology in museums of industrial technology in Japan; 1999 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Kokunai sangyo gijutsu hakubutsukan ni okeru gijutsu keisho keihatsu chosa hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of clarifying the course of promotion of the original/creative future R and D and contributing to selection of technical themes and working-out of developmental methods, survey was conducted paying visits to museums of industrial technology in Japan which evaluate/preserve/exhibit/utilize memorial goods, data, information pertaining to the industrial technology in Japan. Museums for survey were the following ten: Chiba Museum of Science and Industry; Garasu no Sato (Glass Village); Maizuru World Brick Museum; Museum of Industrial Technology; Numata Memorial Hall/Mitsutoyo Museum of Dimensional Metrology; Omachi Energy Museum; Sake Museum; Saint Juan Bautista Museum; Subway Museum; Textile Museum Yukari. One of the points of this survey was to survey the actual state of the experimental type exhibition. The experimental type exhibition, which is wide in sphere, seems to be effective since visitors can operate it, simulate it, feel its size and make scientific experiments. However, the museums are not necessarily satisfied with the present situation. (NEDO)

  20. Results of regulatory impact survey of industrial and medical materials licensees of the Office of Nuclear Material Safety and Safeguards

    International Nuclear Information System (INIS)

    Lach, D.; Melber, B.; Brichoux, J.; Hattrup, M.; Conger, R.; Hughes, K.

    1995-06-01

    This report presents the findings of a regulatory impact survey of nuclear materials licensees of the United States Nuclear Regulatory Commission (NRC). Commissioners of the NRC directed staff to provide the Commission with first hand information from licensees that could be used to improve the overall regulatory program. A self-administered, mail-out survey questionnaire was used to collect data from a sample of licensees who had interaction with the NRC during the previous 12 months. A total of 371 respondents of the 589 who were sent questionnaires returned completed surveys, for a response rate of 63%. The body of the report presents the findings of the survey including a brief introduction to the approach used, followed by survey findings regarding regulations, policies and regulatory guidance; experience with licensing applications, renewals and amendments; inspections; reporting requirements; and enforcement actions. The appendices of the report include a copy of the survey as administered to licensees, a fuller description of the survey design and data collection methods, and detailed graphic material describing survey responses

  1. Efficacy of detergent and water versus bleach for disinfection of direct contact ophthalmic lenses.

    Science.gov (United States)

    Abbey, Ashkan M; Gregori, Ninel Z; Surapaneni, Krishna; Miller, Darlene

    2014-06-01

    Although manufacturers recommend cleaning ophthalmic lenses with detergent and water and then with a specific disinfectant, disinfectants are rarely used in ophthalmic practices. The aim of this pilot study was to evaluate the efficacy of detergent and water versus that of bleach, a recommended disinfectant, to eliminate common ocular bacteria and viruses from ophthalmic lenses. Three bacterial strains (Staphylococcus epidermidis, Corynebacterium straitum, and methicillin-resistant Staphylococcus aureus and 2 viral strains (adenovirus and herpes simplex virus [HSV] type-1) were individually inoculated onto 20 gonioscopy and laser lenses. The lenses were washed with detergent and water and then disinfected with 10% bleach. All the lenses were cultured after inoculation, after washing with detergent and water, and after disinfecting with the bleach. Bacterial cultures in thioglycollate broth were observed for 3 weeks, and viral cultures were observed for 2 weeks. The presence of viruses was also detected by multiplex polymerase chain reaction (PCR). All 20 lenses inoculated with S. epidermidis, C. straitum, adenovirus, and HSV-1 showed growth after inoculation but no growth after washing with detergent/water and after disinfecting with the bleach. All lenses showed positive HSV and adenovirus PCR results after inoculation and negative PCR results after washing with detergent/water and after disinfecting with bleach. All methicillin-resistant S. aureus-contaminated lenses showed growth after inoculation and no growth after washing with detergent and water. However, 1 lens showed positive growth after disinfecting with bleach. Cleaning with detergent and water seemed to effectively eliminate bacteria and viruses from the surface of contaminated ophthalmic lenses. Further studies are warranted to design practical disinfection protocols that minimize lens damage.

  2. Self-assembling peptide detergents stabilize isolated photosystem ion a dry surface for an extended time.

    Directory of Open Access Journals (Sweden)

    2005-07-01

    Full Text Available We used a class of designed peptide detergents to stabilize photosystem I (PS-I upon extended drying under N2 on a gold-coated-Ni-NTA glass surface. PS-I is a chlorophyll-containing membrane protein complex that is the primary reducer of ferredoxin and the electron acceptor of plastocyanin. We isolated the complex from the thylakoids of spinach chloroplasts using a chemical detergent. The chlorophyll molecules associated with the PS-I complex provide an intrinsic steady-state emission spectrum between 650 and 800 nm at -196.15 degrees C that reflects the organization of the pigment-protein interactions. In the absence of detergents, a large blue shift of the fluorescence maxima from approximately 735 nm to approximately 685 nm indicates a disruption in light-harvesting subunit organization, thus revealing chlorophyll-protein interactions. The commonly used membrane protein-stabilizing detergents, N-dodecyl-beta-D-maltoside and N-octyl-beta-D-glucoside, only partially stabilized the approximately 735-nm complex with approximately 685-nm spectroscopic shift. However, prior to drying, addition of the peptide detergent acetyl-AAAAAAK at increasing concentration significantly stabilized the PS-I complex. Moreover, in the presence of acetyl-AAAAAAK, the PS-I complex is stable in a dried form at room temperature for at least 3 wk. Another peptide detergent, acetyl-VVVVVVD, also stabilized the complex but to a lesser extent. These observations suggest that the peptide detergents may effectively stabilize membrane proteins in the solid-state. These designed peptide detergents may facilitate the study of diverse types of membrane proteins.

  3. Polifosfatos em detergentes em pó comerciais Polyphosphates in commercial powder detergents

    Directory of Open Access Journals (Sweden)

    Viktoria Klara Lakatos Osorio

    2001-10-01

    Full Text Available A didactic experiment is proposed in order to identify inorganic phosphates in home laundry detergents by ascending paper chromatography. Chemical principles related with hard water are also investigated. The role of polyphosphates in detergent formulations is discussed and the softening of hard water by sodium tripolyphosphate is illustrated. Several chemical concepts, related to the daily experience of the students, can be explored in post-lab discussions.

  4. NMR spectroscopic and analytical ultracentrifuge analysis of membrane protein detergent complexes

    OpenAIRE

    Choe Senyon; Riek Roland; Johnson Casey; Kefala Georgia; Maslennikov Innokentiy; Kwiatkowski Witek

    2007-01-01

    Abstract Background Structural studies of integral membrane proteins (IMPs) are hampered by inherent difficulties in their heterologous expression and in the purification of solubilized protein-detergent complexes (PDCs). The choice and concentrations of detergents used in an IMP preparation play a critical role in protein homogeneity and are thus important for successful crystallization. Results Seeking an effective and standardized means applicable to genomic approaches for the characteriza...

  5. The Perception of Employee Wellness in the Hospitality Industry : A survey research among hotel employers in the Black Forest, Germany

    OpenAIRE

    Overbeck, Susanne

    2012-01-01

    This thesis deals with the research on the actual perception of employee wellness and employee wellness programs in the context of the hospitality industry. The author’s formulated objectives in order to realize the research were primarily to determine to what extent the employers within the hospitality industry perceive health and wellness of staff as their responsibility. Secondly, to find out whether health and well- being benefits like “employee wellness programs” have any imp...

  6. Federal mineral policies, 1945 to 1975: a survey of federal activities that affected the Canadian mineral industry

    Energy Technology Data Exchange (ETDEWEB)

    Wojciechowski, M

    1979-01-01

    Direct participation and assistance by the government in the mineral industry are discussed. Assistance took the form of grants and subsidies, provision of support services, and provision of transportation and infrastructure facilities. Taxation and tax reform are considered. Regulation of the mineral industry was found to include both direct regulation, such as the Canadian Mining regulations, and indirect regulation, in areas such as manpower, environmental control, transportation and foreign ownership. (67 refs.)

  7. Report on the surveys in fiscal 1999. Surveys on foundations for establishing industrial technology strategies (Strategies by fields - Bio technology field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (Bio technology bun'ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In order to deal with strengthening of competitive power in the bio-technological field and social requirements thereon, it was intended to establish target setting, ways to achieve the objectives, and technological strategies including extraction of policy problems, by combining the wisdom possessed by industries, governmental organizations, and academic world. Section 1 describes the result of the surveys on establishing technological strategies by fields. America tackles importantly with matters related to life science. Japan is strong in fermentation technologies, bio-reactors, and enzyme engineering. Japan stands nearly equal, or is slightly inferior to America in clone livestocks and bio-sensors. Japan's competitiveness is very low in such advanced technology fields as gene therapies, gene combined agricultural products, bio-agricultural chemicals, gene exploration technologies, and gene diagnosis. Section 2 describes technological strategies in four fields. To explain, the improvement in foundations to raise efficiencies in research and development and industrialization processes, strategies to place importance on such industrial fields as realizing 'wishes of people for happiness of diversified nature', the improvement of the environment in which people and societies can enjoy benefits brought about by growth of the industries, and structuring of institutions to promote industrialization of bio-technologies for the nation as a whole. (NEDO)

  8. A robust method to screen detergents for membrane protein stabilization, revisited.

    Science.gov (United States)

    Champeil, Philippe; Orlowski, Stéphane; Babin, Simon; Lund, Sten; le Maire, Marc; Møller, Jesper; Lenoir, Guillaume; Montigny, Cédric

    2016-10-15

    This report is a follow up of our previous paper (Lund, Orlowski, de Foresta, Champeil, le Maire and Møller (1989), J Biol Chem 264:4907-4915) showing that solubilization in detergent of a membrane protein may interfere with its long-term stability, and proposing a protocol to reveal the kinetics of such irreversible inactivation. We here clarify the fact that when various detergents are tested for their effects, special attention has of course to be paid to their critical micelle concentration. We also investigate the effects of a few more detergents, some of which have been recently advertised in the literature, and emphasize the role of lipids together with detergents. Among these detergents, lauryl maltose neopentyl glycol (LMNG) exerts a remarkable ability, even higher than that of β-dodecylmaltoside (DDM), to protect our test enzyme, the paradigmatic P-type ATPase SERCA1a from sarcoplasmic reticulum. Performing such experiments for one's favourite protein probably remains useful in pre-screening assays testing various detergents. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Potential application of cyclic lipopeptide biosurfactants produced by Bacillus subtilis strains in laundry detergent formulations.

    Science.gov (United States)

    Mukherjee, A K

    2007-09-01

    Crude cyclic lipopeptide (CLP) biosurfactants from two Bacillus subtilis strains (DM-03 and DM-04) were studied for their compatibility and stability with some locally available commercial laundry detergents. CLP biosurfactants from both B. subtilis strains were stable over the pH range of 7.0-12.0, and heating them at 80 degrees C for 60 min did not result in any loss of their surface-active property. Crude CLP biosurfactants showed good emulsion formation capability with vegetable oils, and demonstrated excellent compatibility and stability with all the tested laundry detergents. CLP biosurfactants from B. subtilis strains act additively with other components of the detergents to further improve the wash quality of detergents. The thermal resistance and extreme alkaline pH stability of B. subtilis CLP biosurfactants favour their inclusion in laundry detergent formulations. This study has great significance because it is already known that microbial biosurfactants are considered safer alternative to chemical or synthetic surfactants owing to lower toxicity, ease of biodegradability and low ecological impact. The present study provides further evidence that CLP biosurfactants from B. subtilis strains can be employed in laundry detergents.

  10. Death following the ingestion of detergent: an autopsy case with special regard to the histochemical findings.

    Science.gov (United States)

    Kawamoto, Osamu; Ishikawa, Takaki; Oritani, Shigeki; Kuramoto, Yuko; Michiue, Tomomi; Maeda, Hitoshi

    2013-06-01

    We report an autopsy case of death due to accidental ingestion of a liquid laundry detergent with special regard to the histochemical findings. A female inpatient suffering from schizophrenia in a psychiatric institution, was found unconscious lying on the floor of her room, with a container of detergent nearby, and died despite intensive life-support measures. At autopsy, the stomach and duodenum contained whitish translucent foamy viscous fluid, and the mucous membranes, from the esophagus to the duodenum, had diffuse erosions with congestion and edema. There was otherwise no significant pathology other than signs of acute death and hemolysis. Toxicological investigations detected 1-methyl-4-prop-1-en-2-ylcyclohexene (detergent additive) in the gastric contents using headspace-gas chromatography/mass spectrometry, and a nonionic surfactant by a color identification test. Although these substances could not be detected in the blood, body fluid or viscera, histochemical examination using Oil red O demonstrated droplet-like staining in the pulmonary alveoli, suggesting aspiration of detergent, and similar staining in the vasculature of the lung, Kupffer cells of the liver, Bowman capsules of the kidney, and capillaries of the brain, suggesting the systemic effect of ingested/aspirated detergent. These findings were in keeping with death from ingestion of detergent and demonstrated the importance of preventing accidents such as this in healthcare facilities for elderly people.

  11. The ability of fungus Mucor racemosus Fresenius to degrade high concentration of detergent

    Directory of Open Access Journals (Sweden)

    Jakovljević Violeta D.

    2014-01-01

    Full Text Available The ability of fungus Mucor racemosus Fresenius to decompose high concentration of commercial detergent (MERIX, Henkel, Serbia was investigated in this study. Fungus was cultivated in liquid growth medium by Czapek with addition of detergent at concentration 0.5% during 16 days. The biochemical changes of pH, redox potential, amount of free and total organic acids, and activity of alkaline phosphatase were evaluated by analysis of fermentation broth. Simultaneously, biodegradation percentage of anionic surfactant of tested detergent was confirmed by MBAS assay. At the same time, the influence of detergent on fungal growth and total dry weight biomass was determined. Detergent at concentration 0.5% influenced on decreasing of pH value and increasing of redox potential as well as increasing of free and total organic acids. Enzyme activity of alkaline phosphatase was reduced by detergent at concentration 0.5%. The fungus was decomposed about 62% of anionic surfactant during 16 day. Due to fungus was produced higher dry weight biomass (53% in relation to control. [Projekat Ministarstva nauke Republike Srbije, br. III 43004

  12. Detergent-associated solution conformations of helical and beta-barrel membrane proteins.

    Science.gov (United States)

    Mo, Yiming; Lee, Byung-Kwon; Ankner, John F; Becker, Jeffrey M; Heller, William T

    2008-10-23

    Membrane proteins present major challenges for structural biology. In particular, the production of suitable crystals for high-resolution structural determination continues to be a significant roadblock for developing an atomic-level understanding of these vital cellular systems. The use of detergents for extracting membrane proteins from the native membrane for either crystallization or reconstitution into model lipid membranes for further study is assumed to leave the protein with the proper fold with a belt of detergent encompassing the membrane-spanning segments of the structure. Small-angle X-ray scattering was used to probe the detergent-associated solution conformations of three membrane proteins, namely bacteriorhodopsin (BR), the Ste2p G-protein coupled receptor from Saccharomyces cerevisiae, and the Escherichia coli porin OmpF. The results demonstrate that, contrary to the traditional model of a detergent-associated membrane protein, the helical proteins BR and Ste2p are not in the expected, compact conformation and associated with detergent micelles, while the beta-barrel OmpF is indeed embedded in a disk-like micelle in a properly folded state. The comparison provided by the BR and Ste2p, both members of the 7TM family of helical membrane proteins, further suggests that the interhelical interactions between the transmembrane helices of the two proteins differ, such that BR, like other rhodopsins, can properly refold to crystallize, while Ste2p continues to prove resistant to crystallization from an initially detergent-associated state.

  13. Application of Gamma Radiation and Adsorption Treatment to the Remediation of Wastewater Containing Toxic Detergents

    International Nuclear Information System (INIS)

    Dessouki, A.M.; EI-Boohy, H.A.; Eid, M.; Ismail, H.A.

    2005-01-01

    The possibility of gamma radiation induced destruction of anionic detergents (UN-ET and Comperlan) and non-ionic detergent (Tween-60) present in wastewater was investigated. Irradiation dose concentration and ph were studied as factors affecting the degradation process. It was found that anionic detergents are more destruct at a lower dose than the non-ionic one. In solutions of equal concentration , a dose of 35 kGy caused higher degree of destruction in the anionic detergents than a dose of 100 kGy does in the nonionic detergent. Radiation treatment of wastewater in the presence of oxygen and hydrogen peroxide showed an enhancement in the radiation degradation, while nitrogen showed no change. Adsorption and exchange purification of detergents onto GAC, agricultural by-products, ion exchange resins and polymeric membranes were carried out. The results showing that, GAC oxidized with H 2 O 2 and the anion exchanger Merck III having the highest adsorption capacity. The combined treatment of gamma irradiation followed by adsorption was the best method for the total removal of these toxic pollutants as well as their radiolysis products

  14. A survey of occupational cancer in the rubber and cablemaking industries: analysis of deaths occurring in 1972-74.

    Science.gov (United States)

    Fox, A J; Collier, P F

    1976-11-01

    The records of 40 867 men employed for at least one year in the rubber and cablemaking industries have now been observed for eight years. This analysis compares the mortality pattern for 1972-74 with that previously reported for 1968-71. It indicates a significant excess of deaths due to cancer of the bladder throughout the industry including men who had not been exposed to acknowledged bladder carcinogens. This excess is in deaths occurring in 1973 and 1974 in the 45-64 and 65 years plus age groups. The two sectors of the industry where this excess is significant are footwear and footwear supplies except adhesives, and the tyre sector. The excess of all cancers taken together previously noted throughout the study population for 1968-71 is confirmed for 1972-74 as is the excess for lung cancers. The greater excess in the tyre sector is also confirmed, particularly in those men in the 55-64 year age group and those who entered the industry between 1950 and 1960. While men employed in 1967 on moulding, press, autoclave, and pan curing, and workers in finished goods, stores, packaging, and despatch continue to have more lung cancer deaths than expected for 1972-74, the excess is no longer statistically significant. An excess of cancer of the stomach which was overlooked in 1968-71 is not confirmed in 1972-74 but is nevertheless high when the total period of study 1968-74 is considered. The limitations of the study are discussed with particular reference to extrapolating the results to the whole industry. We conclude that there is a higher rate of lung cancer in the tyre sector of the industry and that immediate investigations are required to test the hypothesis concerning the recent excess of bladder cancers. Attention should now be paid to the control of exposures to all potential hazards in the industry.

  15. Preclinical Pharmacokinetic/Pharmacodynamic Modeling and Simulation in the Pharmaceutical Industry: An IQ Consortium Survey Examining the Current Landscape

    OpenAIRE

    Schuck, Edgar; Bohnert, Tonika; Chakravarty, Arijit; Damian-Iordache, Valeriu; Gibson, Christopher; Hsu, Cheng-Pang; Heimbach, Tycho; Krishnatry, Anu Shilpa; Liederer, Bianca M; Lin, Jing; Maurer, Tristan; Mettetal, Jerome T; Mudra, Daniel R; Nijsen, Marjoleen JMA; Raybon, Joseph

    2015-01-01

    The application of modeling and simulation techniques is increasingly common in preclinical stages of the drug discovery and development process. A survey focusing on preclinical pharmacokinetic/pharmacodynamics (PK/PD) analysis was conducted across pharmaceutical companies that are members of the International Consortium for Quality and Innovation in Pharmaceutical Development. Based on survey responses, ~68% of companies use preclinical PK/PD analysis in all therapeutic areas indicating its...

  16. Report on surveys in fiscal 2000 on the survey on preparing list of names of well-informed persons in industrial technological fields; 2000 nendo sangyo gijutsu bun'ya ni okeru yushikisha meibo sakutei ni kakawaru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to identify, in establishing plans for industrial technological fields, the well-informed persons from whom useful knowledge and comments can be obtained, a well-informed person survey was conducted by surveying and hearing the roles and selection processes of the well-informed persons inside and outside the country. For the organizations in Japan, the survey was made on Japan Society for the Promotion of Science, and Japan Science Technology Organization. For the organizations outside the country, surveys were made on two organizations in the U.S., one organization in Germany, and one organization in U.K. All of them are the research aiding organizations established to allocate the national budget to the research investments. As compared to Japan, the organizations in foreign countries are characterized as follows: technological fields that are given priority are declared clearly by the organizations; in selecting the publicly advertised projects, the guidelines on the research scope are strict, but flexibility is given in fund allocation; the first screening process is carried out by researchers and scholars in the same technological field, and the second screening is performed by the authorization committee. Extraction of well-informed persons and preparation of a name list were performed for some of the technological fields in Japan by means of the hearing survey. (NEDO)

  17. Report on surveys and researches to excavate international joint researches related to industrial technologies; Sangyo gijutsu ni kansuru kokusai kyodo kenkyu hakkutsu no tame no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Five themes were taken up for a project of the 'surveys and researches to excavate international joint researches related to industrial technologies'. Investigation groups were organized and dispatched for each theme toperform domestic and overseas surveys. Discussions were given on eachtheme for the possibilities of structuring international joint researches. The five themes are as follows: 'wearable information network related technologies', wherein technologies to micronize information devices have been advanced rapidly, and the technologies are entering the age from personalizing and mobilizing the information into the wearable computing; this theme is intended to develop systems to unify these technologies by means of international joint researches: 'surveys on using unutilized animal oils and fats as chemical raw materials', which are intended to make clear possibilities and problems in utilizing animal oils and fats as raw materials for the chemical industry that can substitute fossil resources: 'international joint researches on new glasses' and 'processes to manufacture semiconductors using glassy carbon' to develop glassy carbon having excellent chemical resistance substituting quartz: and 'international joint researches on the Russian project which places environment and energy in its center'. (NEDO)

  18. Neutral detergent fibre in piglet diets: performance and gastrointestinal implications

    Directory of Open Access Journals (Sweden)

    Rafael Carlos Nepomuceno

    2016-04-01

    Full Text Available ABSTRACT The intestinal health of piglets depends on the balance between diet, microflora and mucosal integrity. Disruption of this balance can compromise the digestive functions, leading to diarrhoeal frame and decline in performance of piglets. However, the level and type of fibre can limit digestive disorders. Thirty newly weaned piglets were used to evaluate the levels of neutral detergent fibre (NDF in diets regarding performance, pH, viscosity and concentration of short chain fatty acids of digestive contents, gastrointestinal transit time, morphology of the intestinal mucosa, weights of organs and occurrence of diarrhoea. NDF level had quadratic effect on weight gain and feed conversion ratio of piglets, estimating best results at the level of 10.4%. NDF level had no effect on the pH, viscosity and concentration of short chain fatty acids. NDF levels below 10.2% or above 13.5% reduced the transit time of digesta. There was quadratic effect on villus height in the duodenum and jejunum and in the crypt depth of jejunum. There was linear increase in stomach, caecum and colon weights and linear decrease in the occurrence of diarrhoea according to increasing NDF levels. It is concluded that levels below 10.2% and above 13.5% reduce the transit time of digesta, whereas 12.2% NDF level results in better mucosa structure of the small intestinal, with an increase in the weights of the stomach, caecum and colon and a reduction in the occurrence of diarrhoea with increasing NDF level in diets, resulting in better performance of weaned piglets with 10.4% of NDF.

  19. Cigarette smoking trends among U.S. working adult by industry and occupation: findings from the 2004-2012 National Health Interview Survey.

    Science.gov (United States)

    Syamlal, Girija; Mazurek, Jacek M; Hendricks, Scott A; Jamal, Ahmed

    2015-05-01

    To examine trends in age-adjusted cigarette smoking prevalence among working adults by industry and occupation during 2004-2012, and to project those prevalences and compare them to the 2020 Healthy People objective (TU-1) to reduce cigarette smoking prevalence to ≤12%. We analyzed the 2004-2012 National Health Interview Survey (NHIS) data. Respondents were aged ≥18 years working in the week prior to the interview. Temporal changes in cigarette smoking prevalence were assessed using logistic regression. We used the regression model to extrapolate to the period 2013-2020. Overall, an estimated 19.0% of working adults smoked cigarettes: 22.4% in 2004 to 18.1% in 2012. The largest declines were among workers in the education services (6.5%) industry and in the life, physical, and social science (9.7%) occupations. The smallest declines were among workers in the real estate and rental and leasing (0.9%) industry and the legal (0.4%) occupations. The 2020 projected smoking prevalences in 15 of 21 industry groups and 13 of the 23 occupation groups were greater than the 2020 Healthy People goal. During 2004-2012, smoking prevalence declined in the majority of industry and occupation groups. The decline rate varied by industry and occupation groups. Projections suggest that certain groups may not reach the 2020 Healthy People goal. Consequently, smoking cessation, prevention, and intervention efforts may need to be revised and strengthened, particularly in specific occupational groups. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco [2014]. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  20. Fine and Coarse Particle Mass Concentrations and Emission Rates in the Workplace of a Detergent Industry

    Czech Academy of Sciences Publication Activity Database

    Glytsos, T.; Ondráček, Jakub; Džumbová, Lucie; Eleftheriadis, K.; Lazaridis, M.

    2014-01-01

    Roč. 23, č. 6 (2014), s. 881-889 ISSN 1420-326X Institutional support: RVO:67985858 Keywords : emission rates * PM 10 * PM2,5 * mass balance model Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.225, year: 2014

  1. Wpływ detergentów, humianu i ściółek na plonowanie goździków w uprawie hydroponicznej [Influence of detergents humate and seedbed materials on yield of carnations in hydroponic culture

    Directory of Open Access Journals (Sweden)

    Z. Gumińska

    2015-06-01

    Full Text Available Addition of the detergent (DBSS + ASS either .single or every eight weeks to the nutrient solution stimulates carnation development. Detergent addition every fourth week caused decreasing of flower diameter. The addition of humates to the nutrient solution did not interact significantly with detergents. Among three material combinations used in the seedbed: peat with coke-slag, peat with brown coal and sponge with coke-slag – the first proved the best.

  2. Innovation strategy management survey of the Chilean biomedical industry. Assessment of windows of opportunities to reduce technological gaps.

    Science.gov (United States)

    Bas, Tomas Gabriel; Oliu, Carolina Alejandra

    2018-04-01

    The convergence of different theories (ie, catch-up effect and windows of opportunities) allows for the interpretation of different "technological innovation gaps" in Chile's biomedical industry. It is common knowledge that Chile has always had an economy almost exclusively based on services, commodities, and mainly in the exploitation of natural resources with low value added. The literature confirms that countries that concentrate their economies on the knowledge, research, development, and commercialization of technology and innovation have a better and more stable growth rate in the medium and long run. The "Asian Tigers" are a good example of this. Analyzing the technological gaps that affect the Chilean biomedical industry, it is possible to find windows of opportunities to catch up. This could allow the country to take its knowledge, skills, and capabilities further, thus enabling Chile to not just depend on its unpredictable natural resources. For the first time, a quantitative diagnosis of the Chilean biomedical industry was made. This study considered the Chilean biomedical industry and its innovation and entrepreneurship environment, taking into account its productive capacities and its potential to make progress in technological innovation and, as a result, dramatically reducing technological gaps through windows of opportunities. Copyright © 2018 John Wiley & Sons, Ltd.

  3. Delivering and Evaluating On-Line Degree Programs in Culinary Arts/Management: A Survey of Educators and Industry Practitioners

    Science.gov (United States)

    Ryll, Stefan

    2017-01-01

    This quantitative research examines the perceptions of culinary arts/management educators and culinary industry practitioners on the future of online culinary arts education. Specifically pertaining to the recommended procedures by educators and chefs to judge and critique the quality of food products in terms sensory modalities, and what the key…

  4. The Survey of Melia Azaderach L. ash in Removal of Hexavalent Chromium from Synthetic Electroplating Industry Wastewater

    Directory of Open Access Journals (Sweden)

    MT Ghaneian

    2014-11-01

    Conclusion: Melia azedarach ash is an effective adsorbent in removal of hexavalent chromium from synthetic electroplating industries wastewater. In addition, the use of this biosorbent in preparation and application aspects is simple and cheap compared to many other natural and man-made adsorbent.

  5. Hardwood lumber widths and grades used by the furniture and cabinet industries: Results of a 14-mill survey

    Science.gov (United States)

    Jan Wiedenbeck; John Brown; Neal Bennett; Everette Rast

    2003-01-01

    Data on red oak lumber width, length, and grade were collected at 14 furniture and cabinet industry rough mills to identify relationships among these lumber attributes and the degree to which they differ from mill to mill. Also, this information is needed to formulate valid lumber size distributions that will improve the quality of theresults obtained in mill and...

  6. Use of anionic denaturing detergents to purify insoluble proteins after overexpression

    Directory of Open Access Journals (Sweden)

    Schlager Benjamin

    2012-12-01

    Full Text Available Background Many proteins form insoluble protein aggregates, called “inclusion bodies”, when overexpressed in E. coli. This is the biggest obstacle in biotechnology. Ever since the reversible denaturation of proteins by chaotropic agents such as urea or guanidinium hydrochloride had been shown, these compounds were predominantly used to dissolve inclusion bodies. Other denaturants exist but have received much less attention in protein purification. While the anionic, denaturing detergent sodiumdodecylsulphate (SDS is used extensively in analytical SDS-PAGE, it has rarely been used in preparative purification. Results Here we present a simple and versatile method to purify insoluble, hexahistidine-tagged proteins under denaturing conditions. It is based on dissolution of overexpressing bacterial cells in a buffer containing sodiumdodecylsulfate (SDS and whole-lysate denaturation of proteins. The excess of detergent is removed by cooling and centrifugation prior to affinity purification. Host- and overexpressed proteins do not co-precipitate with SDS and the residual concentration of detergent is compatible with affinity purification on Ni/NTA resin. We show that SDS can be replaced with another ionic detergent, Sarkosyl, during purification. Key advantages over denaturing purification in urea or guanidinium are speed, ease of use, low cost of denaturant and the compatibility of buffers with automated FPLC. Conclusion Ionic, denaturing detergents are useful in breaking the solubility barrier, a major obstacle in biotechnology. The method we present yields detergent-denatured protein. Methods to refold proteins from a detergent denatured state are known and therefore we propose that the procedure presented herein will be of general application in biotechnology.

  7. Public funding and private investment for R&D: a survey in China’s pharmaceutical industry

    Science.gov (United States)

    2014-01-01

    Background In recent years, China has experienced tremendous growth in its pharmaceutical industry. Both the Chinese government and private investors are motivated to invest into pharmaceutical research and development (R&D). However, studies regarding the different behaviors of public and private investment in pharmaceutical R&D are scarce. Therefore, this paper aims to investigate the current situation of public funding and private investment into Chinese pharmaceutical R&D. Methods The primary data used in the research were obtained from the China High-tech Industry Statistics Yearbook (2002–2012) and China Statistical Yearbook of Science and Technology (2002–2012). We analyzed public funding and private investment in five aspects: total investment in the industry, funding sources of the whole industry, differences between provinces, difference in subsectors, and private equity/venture capital investment. Results The vast majority of R&D investment was from private sources. There is a significantly positive correlation between public funding and private investment in different provinces of China. However, public funding was likely to be invested into less developed provinces with abundant natural herbal resources. Compared with the chemical medicine subsector, traditional Chinese medicine and biopharmaceutical subsectors obtained more public funding. Further, the effect of the government was focused on private equity and venture capital investment although private fund is the mainstream of this type of investment. Conclusions Public funding and private investment play different but complementary roles in pharmaceutical R&D in China. While being less than private investment, public funding shows its significance in R&D investment. With rapid growth of the industry, the pharmaceutical R&D investment in China is expected to increase steadily from both public and private sources. PMID:24925505

  8. Quantitative Determination of NTA and Other Chelating Agents in Detergents by Potentiometric Titration with Copper Ion Selective Electrode.

    Science.gov (United States)

    Ito, Sana; Morita, Masaki

    2016-01-01

    Quantitative analysis of nitrilotriacetate (NTA) in detergents by titration with Cu 2+ solution using a copper ion selective electrode was achieved. This method tolerates a wide range of pH and ingredients in detergents. In addition to NTA, other chelating agents, having relatively lower stability constants toward Cu 2+ , were also qualified with sufficient accuracy by this analytical method for model detergent formulations. The titration process was automated by automatic titrating systems available commercially.

  9. The Contribution of the Type of Detergent to Domestic Laundry Graywater Composition and Its Effect on Treatment Performance

    Directory of Open Access Journals (Sweden)

    Miguel Ángel López Zavala

    2016-05-01

    Full Text Available In this study, the contribution of liquid and powder detergents to the composition of domestic laundry graywater was evaluated. Dosages recommended by the manufacturers were used to prepare detergent solutions and generate laundry graywater. Solutions and graywater were characterized in terms of total solids (TS, total suspended solids (TSS, total dissolved solids (TDS, chemical oxygen demand (COD, total organic carbon (TOC, and concentration of Linear Alkylbenzene Sulfonates (LAS’s. Additionally, the effect of the type of detergent on the treatment performance was also assessed. The coagulation–flocculation process was selected as a potential alternative for treating domestic laundry graywater. Treatment performance was assessed based on the removals of TS, TSS, TDS, turbidity, COD, and electrical conductivity (EC. Optimum coagulant dosages and mixing conditions for flocculation were determined. The results indicate a differential contribution of the type of detergent to the domestic laundry graywater composition. Liquid detergents contributed with more COD and TOC and fewer solids and LAS’s, in comparison with powder detergents. Soiled clothes increased the solids and organic loads of laundry graywater; furthermore, the laundry process reduced the LAS concentration of graywater by 77% for the liquid detergent and 47% for the powder detergent. On the other hand, the coagulation–flocculation process was more effective in treating powder detergent graywater even though the liquid detergent graywater was less polluted. Removal efficiencies on the order of 95% for turbidity and 75% for TSS were achieved for powder detergent graywater; meanwhile, for liquid detergent graywater, the removals were 73% for turbidity and 51% for TSS.

  10. The influence of detergents on the bioproduction of organic matter and the enzymatic activity of two fungal species

    OpenAIRE

    Stojanović Jelica; Veličković D.; Vučetić J.

    2002-01-01

    The effects of a detergent product (Merix, Merima, Krusevac) o the production of aminoacids and monosaccharides and the proteolytic enzyme activity of the fungi Alternariae tenuis am Trichotecium roseum were examined. After incubation for 8 days the concentrations of all aminoacids except for isoleucine in the case of A tenuis and alanine in the case of T. roseum, were found to be lower it media with 1 % detergent than in the control media without acfcfeo detergent. However, progressively inc...

  11. New production concepts in the clothing industry : new ways of work for unpredictable markets : results from a European survey

    NARCIS (Netherlands)

    Dhondt, S.; Peeters, M.H.H.

    1994-01-01

    This brochure summarises the results of a survey carried out among 86 clothing companies representing eight different West European countries. The research examined the effect of new ways of work in clothing companies on personnel policy, on the organisation of work and on the effectiveness of the

  12. Report for fiscal 2000 on surveys on foundation to establish industrial technology strategy. Surveys on foundation to assist activation of research and development; 2000 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kenkyu kaihatsu kasseika shien kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to help discuss the measures to activate researches and developments in private corporations, surveys were made on barriers and factors related to industrial technology research and development by fields, and discussions were given on structuring research and development models. Factors impeding research and development processes relate to a case of each phase in the fundamental research, applied research, and product development, and a case of human resources, funds and information. A policy of structuring models was determined to make quantitative the effects of different aiding systems of the government for researches and developments in private corporations. Case analyses were conducted by using a pilot model. In the present research, a questionnaire survey was carried out to acquire such data as R and D time lag, and to identify the effects of the policies. Surveys were also performed on research and development programs in North America, by making interviews to concerned corporations. As a result of the surveys, such problems were extracted as research and development fund, freer flow of human resources, research and development systems, handling of results of researches performed by consortiums, accounting systems, and sale of the government owned patents. (NEDO)

  13. Capec Consortium: Effective Academic-Industrial Interactions Strengthened By Surveys and Analyses of Gaps in Properties Modeling

    DEFF Research Database (Denmark)

    O'Connell, John P.; Gani, Rafiqul

    The CAPEC Consortium has operated for many years. Starting with UNIFAC correlations for activity coefficients, the research has branched out to many other properties like critical properties, heats of formation, boiling points, heats of vaporization, and many others. One key to CAPEC's success has...... been the establishment of an industrial advisory committee at an early stage. This committee meets annually to provide guidance about which properties are of top priority for the coming year(s). This process will be reviewed along with the resulting compilation of properties of interest and its...... evolution with time. One key to CAPEC's success has been the establishment of an industrial advisory committee at an early stage. This committee meets annually to provide guidance about which properties are of top priority for the coming year(s). This process will be reviewed along with the resulting...

  14. Alarm systems in the nuclear industry - survey of the working situation and identification of future research issues

    International Nuclear Information System (INIS)

    Joensson, Anna; Osvalder, Anna-Lisa; Holmstroem, Conny; Dahlman, Sven

    2004-01-01

    Safety issues are important in the control of industrial processes. An essential part for interpreting and avoiding hazardous situations is the alarm system and its design. To increase the knowledge and to develop new design solutions this doctoral project was initiated. The work has been divided into three stages and this paper presents the results of the first stage. The objective of stage one was to investigate how operators in both nuclear and non-nuclear plants work. A comparison between different branches of industry was also performed. From these results a future research issue has been identified. The methods used were observations, interviews and a literature study. The results showed that the operators are satisfied with the performance of the alarm system during normal operating conditions. However, several problems could also be identified but most of them are already well-known in the nuclear industry. Since these problems are well known but still exist, this result contributes to the basic hypothesis that a theoretical basis is lacking for the design of the alarm system. The proposed issue for forthcoming work is therefore to collect and compile existing knowledge about the human information processing and alarm systems, and combine the knowledge from these areas. With a better understanding of the relation between these areas it is possible to develop new design solutions which are better adapted to the human capabilities and limitations. This would support operator performance which in turn increases plant performance and safety. (Author)

  15. Survey on the consumptions of energy sources in the industry in Italy in 1999; Indagine sugli impieghi delle fonti energetiche nel settore industria in Italia. Anno 1999

    Energy Technology Data Exchange (ETDEWEB)

    Iorio, G. [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Perrella, G. [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, Rome (Italy); Ballin, M. [Istituto Nazionale di Statistica, Dipt. Statistiche Economiche, Rome (Italy); Mercanti, A.; Poggi, A. [Ministero delle Attivita' Produttive, Direzione Generale dell' Energia e delle Risorse Minerarie, Rome (Italy)

    2001-07-01

    This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the italian industry. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The energy intensive sectors and the great industries have represented the nucleus of survey. Particular attention has been devoted to the production of energy and the consumption of heat. [Italian] Il presente rapporto ha l'obiettivo di presentare i risultati dell'indagine campionaria effettuata per determinare il consumo di fonti energetiche (energia elettrica, gas naturale, olio combustibile, gasolio, ecc.) nell'industria italiana. I consumi energetici si riferiscono al 1999 e sono disaggregati per tipologia di utilizzo: consumi energetici per usi produttivi, per produzione di energia e per trazione. I settori ad alta intensita' energetica e le grandi imprese hanno rappresentato il nucleo dell'indagine. Particolare attenzione e' stata dedicata alla produzione di energia e al consumo di calore.

  16. Survey of the situation of technology succession. Databases of articles including in industrial technology museums; Gijutsu keisho jokyo chosa. Sangyo gijutsu hakubutsukan shuzohin D.B. hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To promote the succession of history of and the creative use of industrial science technologies, the paper made lists and databases of the articles of industrial technology museums and material halls in Japan. Record/preservation and collection/systematization of history of the industrial technology is useful for forming bases necessary for promotion of future research/development and international contribution. Museums and material halls are the fields for making comprehensive and practical activities. The data were made as one of the basic databases as the first step for promoting activities for examining the technical succession situation in a long term range continuously and systematically. In the classification of the data, the energy relation was divided into electric power, nuclear power, oil, coal, gas and energy in general. Others were classified into metal/mine, electricity/electronics/communication, chemistry/food, ship building/heavy machinery, printing/precision instrument, and textile/spinning. Moreover, the traffic relation was classified into railroad, automobiles/two-wheeled vehicles, airline/space, and ships. Items were also set of life relation, civil engineering/architecture, and general. The total number of the museums for the survey reached 208.

  17. Basic project on the cooperation in enhancement of the international energy consumption efficiency. Survey of energy conservation potential by industry; 2000 nendo kokusai energy shohi koritsuka chosa nado kyoryoku kiso jigyo hokokusho. Gyoshubetsu sho energy potential chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of looking for measures to promote the effective energy conservation in China, the potential energy conservation amount in general plants was surveyed and analyzed by industry. Activities were made in the following fields: 1) survey of the actual state of energy in main industries; 2) energy conservation potential in the cement industry in China; 3) energy conservation potential in thermal power plants in China. In 1), survey was made on 8 industries including the iron/steel industry and oil refining industry. In 2), survey was made of the actual state of the Liulihe cement plant and Shitou cement plant. The subjects extracted were the arrangement of instrumentation equipment such as the exhaust gas analyzer needed for combustion management, improvement of the air/fuel ratio of kiln, enhancement of cooling efficiency of clinker cooler, etc. In 3), the actual state of the Qinling power plant was surveyed, and it was made clear that high efficiency of 38% or more can be maintained if the appropriate use/maintenance management is made (coal unit consumption: 383g/kWh in Qinling and 309g/kWh). (NEDO)

  18. Detergency of stainless steel surface soiled with human brain homogenate: an XPS study

    Energy Technology Data Exchange (ETDEWEB)

    Richard, M. [Ecole Centrale de Lyon, UMR 5513 LTDS, 69 134 Ecully (France) and Laboratoires ANIOS, 59 260 Lille-Hellemmes (France)]. E-mail: marlene.richard@ec-lyon.fr; Le Mogne, Th. [Ecole Centrale de Lyon, UMR 5513 LTDS, 69 134 Ecully (France); Perret-Liaudet, A. [Hopital Neurologique de Lyon et INSERM U512, 69 394 Lyon (France); Rauwel, G. [Laboratoires ANIOS, 59 260 Lille-Hellemmes (France); Criquelion, J. [Laboratoires ANIOS, 59 260 Lille-Hellemmes (France); De Barros, M.I. [Ecole Centrale de Lyon, UMR 5513 LTDS, 69 134 Ecully (France); Cetre, J.C. [Unite d' Hygiene et d' Epidemiologie, Hopital de la Croix Rousse, 69 317 Lyon (France); Martin, J.M. [Ecole Centrale de Lyon, UMR 5513 LTDS, 69 134 Ecully (France)

    2005-02-15

    In the detergency field of re-usable medical devices, a special attention is focused on the non conventional transmissible agent called prions which is a proteinaceous infectious agent. Few cleaning procedures are effective against prions and few techniques are available to study cleaning effectiveness with respect to proteins in general. In our study, X-ray photoelectron spectroscopy (XPS) has been used to evaluate the effectiveness of detergent formulations to remove proteins from stainless steel surface soiled with a brain homogenate (BH) from human origin. Our results showed that XPS is a reliable surface analysis technique to study chemical species remaining on surface and substrate properties after cleaning procedures. A semi-quantitative evaluation of the detergency effectiveness could also be performed.

  19. Reactive airways dysfunction syndrome from acute inhalation of a dishwasher detergent powder.

    Science.gov (United States)

    Hannu, Timo J; Riihimäki, Vesa E; Piirilä, Päivi L

    2012-01-01

    Reactive airway dysfunction syndrome, a type of occupational asthma without a latency period, is induced by irritating vapour, fumes or smoke. The present report is the first to describe a case of reactive airway dysfunction syndrome caused by acute exposure to dishwater detergent containing sodium metasilicate and sodium dichloroisocyanurate. The diagnosis was based on exposure data, clinical symptoms and signs, as well as respiratory function tests. A 43-year-old nonatopic male apprentice cook developed respiratory symptoms immediately after exposure to a cloud of detergent powder that was made airborne by vigorous shaking of the package. In spirometry, combined obstructive and restrictive ventilatory impairment developed, and the histamine challenge test revealed bronchial hyper-responsiveness. Even routine handling of a strongly caustic detergent, such as filling a dishwasher container, is not entirely risk free and should be performed with caution.

  20. Reactive Airways Dysfunction Syndrome from Acute Inhalation of Dishwasher Detergent Powder

    Directory of Open Access Journals (Sweden)

    Timo J Hannu

    2012-01-01

    Full Text Available Reactive airway dysfunction syndrome, a type of occupational asthma without a latency period, is induced by irritating vapour, fumes or smoke. The present report is the first to describe a case of reactive airway dysfunction syndrome caused by acute exposure to dishwater detergent containing sodium metasilicate and sodium dichloroisocyanurate. The diagnosis was based on exposure data, clinical symptoms and signs, as well as respiratory function tests. A 43-year-old nonatopic male apprentice cook developed respiratory symptoms immediately after exposure to a cloud of detergent powder that was made airborne by vigorous shaking of the package. In spirometry, combined obstructive and restrictive ventilatory impairment developed, and the histamine challenge test revealed bronchial hyper-responsiveness. Even routine handling of a strongly caustic detergent, such as filling a dishwasher container, is not entirely risk free and should be performed with caution.

  1. Interaction of conjugated bile acids and detergents with a radiosorbent assay of vitamin B-12

    International Nuclear Information System (INIS)

    Andersen, K.-J.; Romslo, I.

    1977-01-01

    The effect of conjugated bile acids and detergents on the radiosorbent technique for the determination of vitamin B-12 activity is reported. It is shown that whereas the non-ionic detergent Triton X-100 has no effect on the vitamin B-12-radiosorbent assay, the addition of ionic detergents, e.g. glycocholic acid, taurocholic acid or sodium lauryl sulfate, results in a falsely-elevated vitamin B-12 activity presumably due to the disruption of the binding of vitamin B-12 to the intrinsic factor-Sephadex complex. This effect may be of importance not only to the radiosorbent assaying of vitamin B-12, but to the in vivo intestinal absorption of vitamin B-12 as well

  2. Detergency of stainless steel surface soiled with human brain homogenate: an XPS study

    International Nuclear Information System (INIS)

    Richard, M.; Le Mogne, Th.; Perret-Liaudet, A.; Rauwel, G.; Criquelion, J.; De Barros, M.I.; Cetre, J.C.; Martin, J.M.

    2005-01-01

    In the detergency field of re-usable medical devices, a special attention is focused on the non conventional transmissible agent called prions which is a proteinaceous infectious agent. Few cleaning procedures are effective against prions and few techniques are available to study cleaning effectiveness with respect to proteins in general. In our study, X-ray photoelectron spectroscopy (XPS) has been used to evaluate the effectiveness of detergent formulations to remove proteins from stainless steel surface soiled with a brain homogenate (BH) from human origin. Our results showed that XPS is a reliable surface analysis technique to study chemical species remaining on surface and substrate properties after cleaning procedures. A semi-quantitative evaluation of the detergency effectiveness could also be performed

  3. Removal of Some Detergents from Effluents using Polymeric Materials and gamma-Irradiation

    International Nuclear Information System (INIS)

    Dessouki, A.M.; Abdel Mottaleb, M.S.; Eid, M.; Aliy, O.

    2000-01-01

    The ability of ion exchange resins (Merck Ion Exchangers I and III) and granular activated carbon (GAC) to remove some detergents from aqueous solutions was investigated. The classes of these detergents included one anionic detergent (alkyl benzene sulfonate- ABS) and a non-ionic one (nonyl phenol ethoxylate- NPE). The highest adsorbent for NPE. The complete destruction of ABS was achieved at kGy and at 60 kGy for NPE. It was observed that more adsorption of these pollutants as well as more degradation occurred in the acidic medium (ph 3) than in the neutral and alkaline media. Also, after the complete saturation of the adsorbents and at the end of steady state, they were irradiated with a dose of 20 kGy for Ga and 10 kGy for the ion exchangers resulting in an increase in the protection time due to radiation regeneration. The adsorption process continued for even longer times

  4. Fiscal 1998 research report. Current state survey for promoting the field test project for introduction of advanced industrial furnaces; 1998 nendo koseino kogyoro donyu field test jigyo ni okeru jigyo sokushin no tame no jittai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Survey was made on the current state of installation and operation of industrial furnaces mainly in manufacturers to predict the applicability of advanced industrial furnaces, and study was made on energy consumption trends, the energy saving effect of advanced industrial furnaces, and factor extraction for their applicability. In the survey, questionnaires were delivered to 4,597 offices extracted from domestic 50,780 offices with employees more than 30, and nearly 30% of them were recovered, covering nearly 2.6% of all the offices concerned with this survey. As the survey result, the total annual energy consumption of domestic manufacturers was estimated to be 740,949 x 10{sup 6}Mcal, and among it, 709,709 x 10{sup 6}Mcal for large industrial furnaces. Under the assumption that nearly 30% of large industrial furnaces in operation are replaced with advanced industrial furnaces, energy saving expectation is estimated to be 210,000 x 10{sup 6}Mcal. Opinions and demands for this project showed the difficulty in their application to industrial furnaces in operation and study on their effects. Further enlightenment activities are necessary. (NEDO)

  5. Formerly utilized MED/AEC sites remedial action program. Radiological survey of the Seaway Industrial Park, Tonawanda, New York. Final report

    International Nuclear Information System (INIS)

    Leggett, R.W.; Cottrell, W.D.; Dickson, H.W.

    1978-05-01

    The results of a radiological survey of the Seaway Industrial Park, Tonawanda, New York, are presented in this report. The site is adjacent to the former Haist property, which was used to receive residues from uranium processing during the period 1944--46. In 1974 approximately 6000 yd 3 of this residue was transported to Seaway, where it was used as landfill. The survey was undertaken to determine radiation levels and the extent of radioactive materials on the Seaway property, as well as the extent of movement of radioactive residues by natural means such as surface run-off. The survey included measurement of: external gamma radiation on and near the site; beta-gamma radiation at the surface in the most contaminated areas; radium and uranium concentrations in the soil; concentrations of radium, uranium, and thorium in water samples collected from the drainage areas; and radium concentrations in mud samples taken from the drainage areas. The results indicate that the residues on the site do not pose any immediate health hazards. However, potential health hazards could result from some uses of the site. In particular, if buildings were to be built in certain areas on the site, significant concentrations of radon daughters could develop in these structures. 16 figs, 3 tables

  6. A pilot survey of the U.S. medical waste industry to determine training needs for safely handling highly infectious waste.

    Science.gov (United States)

    Le, Aurora B; Hoboy, Selin; Germain, Anne; Miller, Hal; Thompson, Richard; Herstein, Jocelyn J; Jelden, Katelyn C; Beam, Elizabeth L; Gibbs, Shawn G; Lowe, John J

    2018-02-01

    The recent Ebola outbreak led to the development of Ebola virus disease (EVD) best practices in clinical settings. However, after the care of EVD patients, proper medical waste management and disposal was identified as a crucial component to containing the virus. Category A waste-contaminated with EVD and other highly infectious pathogens-is strictly regulated by governmental agencies, and led to only several facilities willing to accept the waste. A pilot survey was administered to determine if U.S. medical waste facilities are prepared to handle or transport category A waste, and to determine waste workers' current extent of training to handle highly infectious waste. Sixty-eight percent of survey respondents indicated they had not determined if their facility would accept category A waste. Of those that had acquired a special permit, 67% had yet to modify their permit since the EVD outbreak. This pilot survey underscores gaps in the medical waste industry to handle and respond to category A waste. Furthermore, this study affirms reports a limited number of processing facilities are capable or willing to accept category A waste. Developing the proper management of infectious disease materials is essential to close the gaps identified so that states and governmental entities can act accordingly based on the regulations and guidance developed, and to ensure public safety. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  7. False-positive pregnancy test after transfusion of solvent/detergent-treated plasma.

    Science.gov (United States)

    Jilma-Stohlawetz, Petra; Wreford-Bush, Tim; Mills, Francesca; Davidson, Fiona; Kursten, Friedrich W; Jilma, Bernd; Birchall, Janet

    2017-12-01

    The transmission of pathogens, antibodies, and proteins is a possible consequence of blood product transfusion. A female patient had an unexpected positive serum β-human chorionic gonadotropin result, indicative of pregnancy, after she had received a transfusion with 1 unit of platelet concentrate, 4 units of red blood cells, and 4 units of pooled solvent/detergent-treated plasma (Octaplas). To investigate the possibility of passive transfusion of β-human chorionic gonadotropin from the plasma transfusion, one additional unit from the same batch was thawed and analyzed. To validate the β-human chorionic gonadotropin assay for use in solvent/detergent-treated plasma and to investigate any interference in the assay, dilution experiments were performed using the implicated plasma batch diluted with male and non-pregnant female sera. Also, plasma from a known pregnant woman was diluted with Octaplas (tested negative for β-human chorionic gonadotropin) and with a male serum to validate the assay for use in solvent/detergent-treated plasma. The implicated solvent/detergent-treated plasma had a mean β-human chorionic gonadotropin level of 91.5 mIU/mL. Results from the dilution experiments revealed an excellent correlation (r > 0.99) between β-human chorionic gonadotropin measurement in solvent/detergent-treated plasma and male serum and no over or under recovery of the expected results. Further measurements of β-human chorionic gonadotropin levels in the female recipient revealed an estimated half-life of 6 hours. This case demonstrates the importance of considering the possibility of passive transmission of analytes to a patient from the transfusion of blood products. Furthermore, the measurement of β-human chorionic gonadotropin is valid in solvent/detergent-treated plasma using a Roche Cobas analyzer. © 2017 AABB.

  8. The Treatment of Low Level Radioactive Liquid Waste Containing Detergent by Biological Activated Sludge Process

    International Nuclear Information System (INIS)

    Zainus Salimin

    2002-01-01

    The treatment of low level radioactive liquid waste containing persil detergent from laundry operation of contaminated clothes by activated sludge process has been done, for alternative process replacing the existing treatment by evaporation. The detergent concentration in water solution from laundry operation is 14.96 g/l. After rinsing operation of clothes and mixing of laundry water solution with another liquid waste, the waste water solution contains about ≤ 1.496 g/l of detergent and 10 -3 Ci/m 3 of Cs-137 activity. The simulation waste having equivalent activity of Cs-137 10 -3 Ci/m 3 , detergent content (X) 1.496, 0.748, 0.374, 0.187, 0.1496 and 0.094 g/l on BOD value respectively 186, 115, 71, 48, 19, and 16 ppm was processed by activated sludge in reactor of 18.6 l capacity on ambient temperature. It is used Super Growth Bacteria (SGB) 102 and SGB 104, nitrogen and phosphor nutrition, and aeration. The result show that bacteria of SGB 102 and SGB 104 were able to degrade the persil detergent for attaining standard quality of water release category B in which BOD values 6 ppm. It was need 30 hours for X ≤ 0.187 g/l, 50 hours for 0.187 < X ≤ 0.374 g/l, 75 hours for 0.374 < X ≤ 0.748, and 100 hours for 0.748 < X ≤ 1.496 g/l. On the initial period the bacteria of SGB 104 interact most quickly to degrade the detergent comparing SGB 102. Biochemical oxidation process decontaminate the solution on the decontamination factor of 350, Cs-137 be concentrate in sludge by complexing with the bacteria wall until the activity of solution be become very low. (author)

  9. Bile salts stimulate mucin secretion by cultured dog gallbladder epithelial cells independent of their detergent effect.

    Science.gov (United States)

    Klinkspoor, J H; Yoshida, T; Lee, S P

    1998-05-15

    1. Bile salts stimulate mucin secretion by the gallbladder epithelium. We have investigated whether this stimulatory effect is due to a detergent effect of bile salts. 2. The bile salts taurocholic acid (TC) and tauroursodeoxycholic acid (TUDC) and the detergents Triton X-100 (12.5-400 microM) and Tween-20 (0.1-3.2 mM) were applied to monolayers of cultured dog gallbladder epithelial cells. Mucin secretion was studied by measuring the secretion of [3H]N-acetyl-d-glucosamine-labelled glycoproteins. We also attempted to alter the fluidity of the apical membrane of the cells through extraction of cholesterol with beta-cyclodextrin (2.5-15 mM). The effect on TUDC-induced mucin secretion was studied. Cell viability was assessed by measuring lactate dehydrogenase (LDH) leakage or 51Cr release. 3. In contrast with the bile salts, the detergents were not able to cause an increase in mucin secretion without causing concomitant cell lysis. Concentrations of detergent that increased mucin release (>100 microM Triton X-100, >0.8 mM Tween-20), caused increased LDH release. Incubation with beta-cyclodextrin resulted in effective extraction of cholesterol without causing an increase in 51Cr release. However, no effect of the presumed altered membrane fluidity on TUDC (10 mM)-induced mucin secretion was observed. 4. The stimulatory effect of bile salts on mucin secretion by gallbladder epithelial cells is not affected by the fluidity of the apical membrane of the cells and also cannot be mimicked by other detergents. We conclude that the ability of bile salts to cause mucin secretion by the gallbladder epithelium is not determined by their detergent properties.

  10. The impact of detergents on the tissue decellularization process: A ToF-SIMS study.

    Science.gov (United States)

    White, Lisa J; Taylor, Adam J; Faulk, Denver M; Keane, Timothy J; Saldin, Lindsey T; Reing, Janet E; Swinehart, Ilea T; Turner, Neill J; Ratner, Buddy D; Badylak, Stephen F

    2017-03-01

    Biologic scaffolds are derived from mammalian tissues, which must be decellularized to remove cellular antigens that would otherwise incite an adverse immune response. Although widely used clinically, the optimum balance between cell removal and the disruption of matrix architecture and surface ligand landscape remains a considerable challenge. Here we describe the use of time of flight secondary ion mass spectroscopy (ToF-SIMS) to provide sensitive, molecular specific, localized analysis of detergent decellularized biologic scaffolds. We detected residual detergent fragments, specifically from Triton X-100, sodium deoxycholate and sodium dodecyl sulphate (SDS) in decellularized scaffolds; increased SDS concentrations from 0.1% to 1.0% increased both the intensity of SDS fragments and adverse cell outcomes. We also identified cellular remnants, by detecting phosphate and phosphocholine ions in PAA and CHAPS decellularized scaffolds. The present study demonstrates ToF-SIMS is not only a powerful tool for characterization of biologic scaffold surface molecular functionality, but also enables sensitive assessment of decellularization efficacy. We report here on the use of a highly sensitive analytical technique, time of flight secondary ion mass spectroscopy (ToF-SIMS) to characterize detergent decellularized scaffolds. ToF-SIMS detected cellular remnants and residual detergent fragments; increased intensity of the detergent fragments correlated with adverse cell matrix interactions. This study demonstrates the importance of maintaining a balance between cell removal and detergent disruption of matrix architecture and matrix surface ligand landscape. This study also demonstrates the power of ToF-SIMS for the characterization of decellularized scaffolds and capability for assessment of decellularization efficacy. Future use of biologic scaffolds in clinical tissue reconstruction will benefit from the fundamental results described in this work. Copyright © 2016 Acta

  11. Waste prevention in liquid detergent distribution: a comparison based on life cycle assessment.

    Science.gov (United States)

    Nessi, Simone; Rigamonti, Lucia; Grosso, Mario

    2014-11-15

    The distribution of liquid detergents through self-dispensing systems has been adopted in some Italian retail stores over the last few years. By enabling the consumer to refill several times the same container, it is proposed as a less waste-generating and more environmentally friendly alternative to the traditional distribution with single-use plastic containers. For this reason, its implementation is encouraged by the national waste prevention programme recently adopted in Italy. In order to assess such claims, a life cycle assessment was carried out to evaluate whether detergent distribution through self-dispensing systems actually allows to achieve the expected reduction in waste generation and environmental impacts. The focus was on the distribution within the large-scale retail trade and on the categories of laundry detergents, fabric softeners and hand dishwashing detergents. For each of them, a set of baseline single-use scenarios were compared with two alternative waste prevention scenarios, where the detergent is distributed through self-dispensing systems. Beyond waste generation, also the Cumulative Energy Demand and thirteen midpoint-level potential impact indicators were calculated for the comparison. Results showed that a reduction in waste generation up to 98% can be achieved, depending on the category of detergent, on the baseline scenario of comparison and on the number of times the refillable container is used. A progressive reduction in the energy demand and in most of the potential impacts was also observed, starting from a minimum number of uses of the refillable container. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Survey by region/industry in India; Kankyo chowagata sekitan riyo system kanosei chosa. Indo ni okeru sekitan riyo gaikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A survey was made in India which is a coal producing/consuming country following China in Asia and where coal is used for about 60% of the primary commercial energy. The survey was conducted on coal production/distribution/utilization and environmental issues, aiming at studying feasibility of introducing the environmentally friendly coal utilization system into every industry including the residential/commercial one, and at implementing a comprehensive master plan including Japan`s international cooperation. Total power source facilities in fiscal 1995 are 83.3 million kW, 64% of which are coal thermal power facilities and generated 260 TWh, 69% of the total output energy. Main commercial energy sources are coal, oil and natural gas, and oil is self-sufficient. The survey this time did not examine very well the actual state of the environmental pollution problem caused by the coal utilization. Indian coal is high in ash content but low in sulfur content, and therefore, SOx polluting air has not been a very important problem so far, but soot/smoke is almost the problem. Further, ash treatment after combustion at boilers, etc. is expected to be a big problem in the future. 49 figs., 88 tabs.

  13. Report on a survey in fiscal 1999. Survey on industrial utilization of microorganism reaction mechanisms under anaerobic condition; 1999 nendo kenki jokenka ni okeru biseibutsu hanno kiko no kogyoteki riyo ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Industrial utilization of reaction mechanisms of microorganisms under anaerobic condition permits structuring energy saving type production processes. The present survey has investigated features of new microorganisms under anaerobic condition and the status of researches thereon inside and outside the country, and discussed their future applications. Chapter 1 compares anaerobic microorganisms and functions of microorganism under anaerobic condition with those aerobic to describe their general features, and describes the purpose of this survey and the summary of the investigations. Chapter 2 surveys the current status of technologies to utilize microorganisms under anaerobic condition. Chapter 3 outlines metabolic characteristics of the anaerobic microorganisms, and extracts functions effective for material production by different anaerobic microorganisms to describe their applicability. Chapter 4 evaluates the system classification for the anaerobic microorganisms utilizing the basic arrangement of 16S rRNA genes, and extracts technical problems therein. Chapter 5 proposes structuring a total methane fermentation system including a raw material collecting process, and enhancing alcohol productivity of Zymomonas bacteria. (NEDO)

  14. Solution structure of detergent micelles at conditions relevant to membrane protein crystallization.

    Energy Technology Data Exchange (ETDEWEB)

    Littrell, K.; Thiyagarajan, P.; Tiede, D.; Urban, V.

    1999-07-02

    In this study small angle neutron scattering was used to characterize the formation of micelles in aqueous solutions of the detergents DMG and SPC as a function of detergent concentration and ionic strength of the solvent. The effects on the micelle structure of the additives glycerol and PEG, alone as well as in combination typical for actual membrane protein crystallization, were also explored. This research suggests that the micelles are cigar-like in form at the concentrations studied. The size of the micelles was observed to increase with increasing ionic strength but decrease with the addition of glycerol or PEG.

  15. Protein-detergent interactions in single crystals of membrane proteins studied by neutron crystallography

    International Nuclear Information System (INIS)

    Timmins, P.A.; Pebay-Peyroula, E.

    1994-01-01

    The detergent micelles surrounding membrane protein molecules in single crystals can be investigated using neutron crystallography combined with H 2 O/D 2 O contrast variation. If the protein structure is known then the contrast variation method allows phases to be determined at a contrast where the detergent dominates the scattering. The application of various constraints allows the resulting scattering length density map to be realistically modeled. The method has been applied to two different forms of the membrane protein porin. In one case both hydrogenated and partially deuterated protein were used, allowing the head group and tail to be distinguished

  16. Protein-detergent interactions in single crystals of membrane proteins studied by neutron crystallography

    Energy Technology Data Exchange (ETDEWEB)

    Timmins, P.A. [ILL, Grenoble (France); Pebay-Peyroula, E. [IBS-UJF Grenoble (France)

    1994-12-31

    The detergent micelles surrounding membrane protein molecules in single crystals can be investigated using neutron crystallography combined with H{sub 2}O/D{sub 2}O contrast variation. If the protein structure is known then the contrast variation method allows phases to be determined at a contrast where the detergent dominates the scattering. The application of various constraints allows the resulting scattering length density map to be realistically modeled. The method has been applied to two different forms of the membrane protein porin. In one case both hydrogenated and partially deuterated protein were used, allowing the head group and tail to be distinguished.

  17. Evaluation of eco-friendly zwitterionic detergents for enveloped virus inactivation.

    Science.gov (United States)

    Conley, Lynn; Tao, Yinying; Henry, Alexis; Koepf, Edward; Cecchini, Douglas; Pieracci, John; Ghose, Sanchayita

    2017-04-01

    Inclusion of a detergent in protein biotherapeutic purification processes is a simple and very robust method for inactivating enveloped viruses. The detergent Triton X-100 has been used for many years and is part of the production process of several commercial therapeutic proteins. However, recent ecological studies have suggested that Triton X-100 and its break-down products can potentially behave as endocrine disrupters in aquatic organisms, raising concerns from an environmental impact perspective. As such, discharge of Triton X-100 into the waste water treatment plants is regulated in some jurisdictions, and alternative detergents for viral inactivation are required. In this work, we report on the identification and evaluation of more eco-friendly detergents as viable replacements for Triton X-100. Five detergent candidates with low to moderate environmental impact were initially identified and evaluated with respect to protein stability, followed by proof-of-concept virus inactivation studies using a model enveloped virus. From the set of candidates lauryldimethylamine N-oxide (LDAO) was identified as the most promising detergent due to its low ecotoxicity, robust anti-viral activity (LRV >4 at validation set-point conditions with X-MuLX), and absence of any negative impact on protein function. This detergent exhibited effective and robust virus inactivation in a broad range of protein concentrations, solution conductivities, pHs, and in several different cell culture fluid matrices. The only process parameter which correlated with reduced virus inactivation potency was LDAO concentration, and then only when the concentration was reduced to below the detergent's critical micelle concentration (CMC). Additionally, this work also demonstrated that LDAO was cleared to below detectable levels after Protein A affinity chromatography, making it suitable for use in a platform process that utilizes this chromatographic mode for protein capture. All these findings

  18. FibreBags vs. FibreCaps for acid and neutral detergent fibre analysis

    OpenAIRE

    Koivisto , Jason

    2003-01-01

    International audience; A new procedure for determining acid detergent fibre and neutral detergent fibre (ADF and NDF) was developed to reduce the need for filtration and to allow for batch processing of forage samples. The FibreBag system is an economically necessary evolution of the earlier FibreCap system. The purpose of this enquiry was to determine if the FibreBag is a suitable replacement for the FibreCap. The FibreBag method produced very similar results to the FibreCap system of analy...

  19. Bile salts stimulate mucin secretion by cultured dog gallbladder epithelial cells independent of their detergent effect.

    OpenAIRE

    Klinkspoor, J H; Yoshida, T; Lee, S P

    1998-01-01

    1. Bile salts stimulate mucin secretion by the gallbladder epithelium. We have investigated whether this stimulatory effect is due to a detergent effect of bile salts. 2. The bile salts taurocholic acid (TC) and tauroursodeoxycholic acid (TUDC) and the detergents Triton X-100 (12.5-400 microM) and Tween-20 (0.1-3.2 mM) were applied to monolayers of cultured dog gallbladder epithelial cells. Mucin secretion was studied by measuring the secretion of [3H]N-acetyl-d-glucosamine-labelled glycoprot...

  20. The study of membrane-protein /detergent interactions by neutron crystallography

    Energy Technology Data Exchange (ETDEWEB)

    Timmins, P A; Penel, S [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France); Pebay-Peyroula, E [IBS- UJF Grenoble (France)

    1997-04-01

    Proteins which are found embedded in membranes can usually only be purified and studied from the point of view of structure by dissolving them in detergents. The structure of the resulting mixed protein-detergent complexes are poorly understood. An important method for studying them is through neutron diffraction of the crystalline complexes. This allows us to understand better how the proteins behave in the natural membrane as well as allowing us to visualize and hopefully improve the crystallisation process. Studies on the pore-forming protein porin using data collected on the diffractometer DB21 are described. (author). 4 refs.

  1. Scaling up close-range surveys, a challenge for the generalization of as-built data in industrial applications

    Science.gov (United States)

    Hullo, J.-F.; Thibault, G.

    2014-06-01

    As-built CAD data reconstructed from Terrestrial Laser Scanner (TLS) data are used for more than two decades by Electricité de France (EDF) to prepare maintenance operations in its facilities. But today, the big picture is renewed: "as-built virtual reality" must address a huge scale-up to provide data to an increasing number of applications. In this paper, we first present a wide multi-sensor multi-purpose scanning campaign performed in a 10 floor building of a power plant in 2013: 1083 TLS stations (about 40.109 3D points referenced under a 2 cm tolerance) and 1025 RGB panoramic images (340.106 pixels per point of view). As expected, this very large survey of high precision measurements in a complex environment stressed sensors and tools that were developed for more favourable conditions and smaller data sets. The whole survey process (tools and methods used from acquisition and processing to CAD reconstruction) underwent a detailed follow-up in order to state on the locks to a possible generalization to other buildings. Based on these recent feedbacks, we have highlighted some of these current bottlenecks in this paper: sensors denoising, automation in processes, data validation tools improvements, standardization of formats and (meta-) data structures.

  2. Scaling up close-range surveys, a challenge for the generalization of as-built data in industrial applications

    Directory of Open Access Journals (Sweden)

    J.-F. Hullo

    2014-06-01

    Full Text Available As-built CAD data reconstructed from Terrestrial Laser Scanner (TLS data are used for more than two decades by Electricité de France (EDF to prepare maintenance operations in its facilities. But today, the big picture is renewed: "as-built virtual reality" must address a huge scale-up to provide data to an increasing number of applications. In this paper, we first present a wide multi-sensor multi-purpose scanning campaign performed in a 10 floor building of a power plant in 2013: 1083 TLS stations (about 40.109 3D points referenced under a 2 cm tolerance and 1025 RGB panoramic images (340.106 pixels per point of view. As expected, this very large survey of high precision measurements in a complex environment stressed sensors and tools that were developed for more favourable conditions and smaller data sets. The whole survey process (tools and methods used from acquisition and processing to CAD reconstruction underwent a detailed follow-up in order to state on the locks to a possible generalization to other buildings. Based on these recent feedbacks, we have highlighted some of these current bottlenecks in this paper: sensors denoising, automation in processes, data validation tools improvements, standardization of formats and (meta- data structures.

  3. 21 CFR 701.20 - Detergent substances, other than soap, intended for use in cleansing the body.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Detergent substances, other than soap, intended... Ingredients § 701.20 Detergent substances, other than soap, intended for use in cleansing the body. (a) In its definition of the term cosmetic, the Federal Food, Drug, and Cosmetic Act specifically excludes soap. The...

  4. Crystallization of P-type ATPases by the High Lipid-Detergent (HiLiDe) Method

    DEFF Research Database (Denmark)

    Sitsel, Oleg; Wang, Kaituo; Liu, Xiangyu

    2016-01-01

    Determining structures of membrane proteins remains a significant challenge. A technique utilizing high lipid-detergent concentrations ("HiLiDe") circumvents the major bottlenecks of current membrane protein crystallization methods. During HiLiDe, the protein-lipid-detergent ratio is varied in a ...... crystallization techniques. The method has been applied with particular success to P-type ATPases....

  5. Perturbations of Native Membrane Protein Structure in Alkyl Phosphocholine Detergents: A Critical Assessment of NMR and Biophysical Studies

    Science.gov (United States)

    2018-01-01

    Membrane proteins perform a host of vital cellular functions. Deciphering the molecular mechanisms whereby they fulfill these functions requires detailed biophysical and structural investigations. Detergents have proven pivotal to extract the protein from its native surroundings. Yet, they provide a milieu that departs significantly from that of the biological membrane, to the extent that the structure, the dynamics, and the interactions of membrane proteins in detergents may considerably vary, as compared to the native environment. Understanding the impact of detergents on membrane proteins is, therefore, crucial to assess the biological relevance of results obtained in detergents. Here, we review the strengths and weaknesses of alkyl phosphocholines (or foscholines), the most widely used detergent in solution-NMR studies of membrane proteins. While this class of detergents is often successful for membrane protein solubilization, a growing list of examples points to destabilizing and denaturing properties, in particular for α-helical membrane proteins. Our comprehensive analysis stresses the importance of stringent controls when working with this class of detergents and when analyzing the structure and dynamics of membrane proteins in alkyl phosphocholine detergents. PMID:29488756

  6. Ligand-induced association of surface immunoglobulin with the detergent insoluble cytoskeleton may involve an 89K protein

    International Nuclear Information System (INIS)

    Gupta, S.K.; Woda, B.

    1986-01-01

    Membrane immunoglobulin of B-lymphocytes is thought to play an important role in antigen recognition and cellular activation. Binding of cross-linking ligands to surface immunoglobulin (SIg) on intact cells converts it to a detergent insoluble state, and this conversion is associated with the transmission of a mitogenic signal. Insolubilized membrane proteins may be solubilized by incubating the detergent insoluble cytoskeletons in buffers which convert F-actin to G-actin [(Buffer 1), 0.34M sucrose, 0.5mM ATP, 0.5mM Dithiothrietol and lmM EDTA]. Immunoprecipitation of SIg from the detergent soluble fraction of 35 S-methionine labeled non ligand treated rat B-cells results in the co-isolation of an 89K protein and a 44K protein, presumably actin. The 89K protein is not associated with the fraction of endogenous detergent insoluble SIg. On treatment of rat B cells with cross-linking ligand (anti-Ig) the 89K protein becomes detergent insoluble along with most of the SIg and co-isolates with SIg on immunoprecipitation of the detergent insoluble, buffer l solubilized fraction. The migration of the SIg-associated 89K protein from the detergent soluble fraction to the detergent insoluble fraction after ligand treatment, suggests that this protein might be involved in linking SIg to the underlying cytoskeleton and could be involved in the transmission of a mitogenic signal

  7. Effect of some detergents, humate, and composition of seedbed on crop of tomato plants in a hydroponic culture

    Science.gov (United States)

    Guminka, A. Z.; Gracz-Nalepka, M.; Lukasiewicz, B.; Sobolewicz, E.; Turkiewicz, I. T.

    1978-01-01

    It is established that single detergent doses distinctly stimulate vegetative development of plants in the initial stage when humates are available. When detergents are applied every four weeks in a hydroponic culture, in which the seedbed does not contain active humates, the crop is reduced by 50%. This adverse effect does not occur when the seedbed is a mixture of brown coal and peat.

  8. Adamantane-based amphiphiles (ADAs) for membrane protein study: importance of a detergent hydrophobic group in membrane protein solubilisation.

    Science.gov (United States)

    Chae, Pil Seok; Bae, Hyoung Eun; Das, Manabendra

    2014-10-21

    We prepared adamantane-containing amphiphiles and evaluated them using a large membrane protein complex in terms of protein solubilisation and stabilization efficacy. These agents were superior to conventional detergents, especially in terms of the membrane protein solubilisation efficiency, implying a new detergent structure-property relationship.

  9. Remuneration for non-interventional studies – results of a survey in the pharmaceutical industry in Germany

    Directory of Open Access Journals (Sweden)

    Thorsten Ruppert

    2012-02-01

    Full Text Available In 2007 the Association of Research-Based Pharmaceutical Companies (vfa published recommendations to improve the quality and transparency of non-interventional studies. These recommendations include quality assurance measures, in particular with respect to transparency as well as for the verification of the data collected in these studies. This publication presents the results of a survey on fees in non-interventional studies which was conducted within the member companies of the vfa in June 2011. These results demonstrate a consistent adherence to the statutory requirements and the implementation of the recommendations concerning the remuneration of the study centers. Depending on the indication, the number of routine doctor/patient contacts is different and associated with that number the documentation efforts vary. Accordingly, the fee varies based on the fee schedule for physicians (German: Gebührenordnung für Ärzte by taking into account the actual efforts at the study center.

  10. A Survey of the Literature on Local Content Policies in the Oil and Gas Industry in East Africa

    Directory of Open Access Journals (Sweden)

    Chilenye Nwapi

    2016-04-01

    Full Text Available Although oil and gas exploration has been going on in East Africa for decades, until recently exploration activities grew more slowly compared to other regions in Africa. Today, there has been a series of oil and gas discoveries in several East African countries, including Kenya, Madagascar, Mozambique, Tanzania and Uganda. Debate is however mounting over what effect the new oil and gas discoveries would have on East Africa, given the trajectory of older oil-producing countries in Africa, particularly Angola, Nigeria and Sudan. The challenge for East Africa is, therefore, how to maximize the potential benefits from the resources to avoid the under-developmental path that these other countries followed. There is general consensus that lack of specialized skills is a major obstacle to Africa’s realization of its resource potentials. One instrument currently being adopted by most oil and gas resource-rich countries (both in and outside Africa to deal with the skills problem and to enhance linkages between the oil and gas sector and other sectors of the economy is the formulation of local content policies (LCPs. Typically, LCPs require companies to give preferential treatment to nationals of the country in which they operate in matters of employment and in the procurement of goods and services. It is believed that this would result in technology transfer and facilitate the ability of the country to take charge of its own development. But LCPs come with certain tradeoffs: Their potential incompatibility with international trade agreements threatens their sustenance; they can create unrealistic expectations capable of discouraging investment; and they are easily prone to corruption. However, there is a strong case for emerging oil and gas-producing East African countries to consider adopting the LCP. The nascent nature of the oil and gas industry in the region means that these countries would not have the technical and even managerial expertise to

  11. Survey Situation and Factors Affect on Hearing Protection Large Industry Workers of Hamadan City in 2001-2002

    Directory of Open Access Journals (Sweden)

    F. Emami

    2004-01-01

    Full Text Available Noise induced hearing loss in adults is the most cause of sensory neural hearing loss after the presbycusis and industry workers severity affect by degenerative results of that. Three large works of Hamadan city which had more than 200 Workers were selected in this demonstrative quest . The mean of sound pressure level evaluated with sound level meter which amount to 82-95 dB. Total exposed workers with higher noise than 85 dB evaluated by pure tone audiometery and otoscopic evaluation and the means of hearing thresholds in four frequency :0.5,1,2,4 kHz balanced with previously . Method of concentration data was direct observation and questionnaire . 809 workers in local works exposed to invasive noise . 20.02% of them hadn’t any hearing protector and 79.98% had , which combinated of wax or dry cotton and fiber glass (76.20%, earplug (7.42%and earmuff(16.38%. The means of hearing thresholds workers with protector equal to 43.36 dB and without that was equal to 44.03 dB (t=0.29, Pv<0.05. Highest percentage quantity in two groups related to age –bracket 40-49 years old. Women with protection(9.43%were more than without protector(3.7% while the most percentage related to men without protector (96.3% in contrast to 90.57%.In totally highest percentage quantity of NIHL was in workers with past-working more than 15 years (67.54% with protector , 67.28%without protector. For awareness of degenerative results the noise in hearing large industry workers of Hamadan city 75% insignificant and 25% had efficient awareness . Not using of protectors by 20.2% of worker showing light awareness to degenerative results of noise on hearing system and poor educational healthing and noting difference in means of hearing loss at protected group on basis duration of using that, strikes the process of hearing conservation program is superficial.

  12. Application of alkaline thermo-stable lipase(s) enzyme produced from irradiated microbial isolate in the field of detergent technology

    International Nuclear Information System (INIS)

    Ahmed, O.E.A.M.S

    2010-01-01

    Due to continuous demand for manufacture of high quality, low coast industrial detergents containing lipolytic enzymes and due to continuous accumulation of enviro-agro-industrial wastes which are good and suitable conditions for growth and reproduction of pathogenic microorganisms, our study aims at isolating thermoalkalophilic lipase producer microorganisms from enviro-agro-industrial wastes and selection of the most potent isolate for studying physiological conditions controlling enzyme formation also purification characterization and some applications on purified and crude enzyme as bio-detergent. Some environmental and industrial wastes were collected from different places. The industrial wastes include, cotton seed, soyabean, sun flower, lin seed and olive oil wastes. Environmental wastes include poultry and fish wastes, all these wastes were dried at 70 degree C, grounded and used for isolation of microorganisms and lipase(s) production.Nine thermoalkalophilic bacterial isolates were isolated from enviro-agro-industrial wastes at ph 11.5 and 70 degree C. They were purified and screening for their ability of thermoalkalo-stable lipase(s) formation, this is followed by examining the effect of different nutritional media and exposure of bacterial isolates to different doses of gamma irradiation and the influence of these radiation on lipase(s) productivity by these isolates. From the results it was found that.1- The most potent lipase(s) forming bacterial isolates were isolates number B 2 and B 3 which cultivated on medium A amended with fish-wastes as being the best nutritional medium for enzyme formation. 2-Bacterial isolate B 2 finally was selected as being the most potent lipase(s) forming bacterial isolate cultivated on fish-wastes and yeast extract (in tap water) and identified according to key's of Bergey Manual of Systematic Bacteriology (1984) as being Bacillus brevis B 2 .The optimum culture conditions for maximum biosynthesis of extracellular lipase

  13. Comparative studies on detergent-assisted apocytochrome b6 reconstitution into liposomal bilayers monitored by Zetasizer instruments.

    Directory of Open Access Journals (Sweden)

    Michał A Surma

    Full Text Available The present paper is a systematic, comparative study on the reconstitution of an apocytochrome b6 purified from a heterologous system using a detergent-free method and reconstitution into liposomes performed using three different detergents: SDS, Triton X-100 and DM, and two methods of detergent removal by dialysis and using Bio-Beads. The product size, its distribution and zeta potential, and other parameters were monitored throughout the process. We found that zeta potential of proteoliposomes is correlated with reconstitution efficiency and, as such, can serve as a quick and convenient quality control for reconstitution experiments. We also advocate using detergent-free protein purification methods as they allow for an unfettered choice of detergent for reconstitution, which is the most crucial factor influencing the final product parameters.

  14. Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

    Energy Technology Data Exchange (ETDEWEB)

    Visser, Ilona, E-mail: ilona.visser@unilever.com [Unilever Research and Development Vlaardingen, Olivier van Noortlaan 120, PO box 114, 3130 AC Vlaardingen (Netherlands); Klinkenberg, Monique; Hoos, Peter; Janssen, Hans-Gerd; Duynhoven, John van [Unilever Research and Development Vlaardingen, Olivier van Noortlaan 120, PO box 114, 3130 AC Vlaardingen (Netherlands)

    2009-11-03

    The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of surfactants is a major complication, due to the strong tendency of surfactants to form micelles and to interact with the polymers. First, we addressed critical steps in the subsequent combined use of liquid extraction and off-line size exclusion chromatography-nuclear magnetic resonance (SEC-NMR) for identification and quantification of polycarboxylates in detergent products. Next, the different steps in the off-line SEC-NMR procedure were optimized with respect to precision and accuracy. This resulted in recoveries of more than 80% for maleic acid/acrylic acid copolymers; in detergent products a proportional bias of 30% is achieved. The method showed good precision with a relative standard deviation of within-laboratory reproducibility between 5% and 14%.

  15. Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

    International Nuclear Information System (INIS)

    Visser, Ilona; Klinkenberg, Monique; Hoos, Peter; Janssen, Hans-Gerd; Duynhoven, John van

    2009-01-01

    The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of surfactants is a major complication, due to the strong tendency of surfactants to form micelles and to interact with the polymers. First, we addressed critical steps in the subsequent combined use of liquid extraction and off-line size exclusion chromatography-nuclear magnetic resonance (SEC-NMR) for identification and quantification of polycarboxylates in detergent products. Next, the different steps in the off-line SEC-NMR procedure were optimized with respect to precision and accuracy. This resulted in recoveries of more than 80% for maleic acid/acrylic acid copolymers; in detergent products a proportional bias of 30% is achieved. The method showed good precision with a relative standard deviation of within-laboratory reproducibility between 5% and 14%.

  16. State-of-the-art and dissemination of computational tools for drug-design purposes: a survey among Italian academics and industrial institutions.

    Science.gov (United States)

    Artese, Anna; Alcaro, Stefano; Moraca, Federica; Reina, Rocco; Ventura, Marzia; Costantino, Gabriele; Beccari, Andrea R; Ortuso, Francesco

    2013-05-01

    During the first edition of the Computationally Driven Drug Discovery meeting, held in November 2011 at Dompé Pharma (L'Aquila, Italy), a questionnaire regarding the diffusion and the use of computational tools for drug-design purposes in both academia and industry was distributed among all participants. This is a follow-up of a previously reported investigation carried out among a few companies in 2007. The new questionnaire implemented five sections dedicated to: research group identification and classification; 18 different computational techniques; software information; hardware data; and economical business considerations. In this article, together with a detailed history of the different computational methods, a statistical analysis of the survey results that enabled the identification of the prevalent computational techniques adopted in drug-design projects is reported and a profile of the computational medicinal chemist currently working in academia and pharmaceutical companies in Italy is highlighted.

  17. Study on a Preliminary Survey and Analysis of HLW Management Technology Suitable for Nuclear Industrial Environment in Korea

    International Nuclear Information System (INIS)

    Kim, Eun Ka; Suh, In Suk; Ro, Seong Gy; Yoo, Kun Joong; Yoo, Jae Hyung; Cho, Sung Soo

    2010-12-01

    The purpose of this study is to suggest development direction of related technologies to analyze patented technology filed as a leading technology and to identify the technology trend for developing HLW management technology suitable for atomic industrial environment in Korea. For patent analysis of HLW management technology, international patent data were collected. And international application number, patent share of applicant and nationality, annual number of applications, application trends of assignees and detail technology, and frequency of patent citations / citations-to were analyzed by statistical analysis. Technical level and competitiveness through quantitative analysis by indicators of patent analysis were confirmed. And technology developments of blank technology, similarity analysis, the point of the main patent and a range of patent rights were analyzed through in-depth analysis. Trends of the patented technology of our country and world patent technology in such results have been identified, and statistical data on patents were secured. Especially in HLW management technology, patent application in Korea compared ti United States, Japan and European Union was began much later for the '90s, and are showing the annual increase on trend of patent application. Patent trend in Korea corresponds to development generation, while declining in foreign patent. The result of this study will be usefully applied to setting a development direction and blank technology of patent technology to pursue future in Korea

  18. The influence of sodium-polyacrilic macromolecular chain length to the powder detergents secondary washing performances

    Directory of Open Access Journals (Sweden)

    Milojević Vladimir S.

    2013-01-01

    Full Text Available In order to investigate the influence of sodium-polyacrylate polymer as a co-builder in addition to the carbonate/zeolite builders in detergent builder system, secondary washing performances of powder laundry detergent containing equal percentage of sodium polyacrylate with the different weight average molar mass, Mw, have been examined. The value of the degree of whiteness, elongation at break, and total residue content are the most important secondary washing performances that significantly depend on sodium polyacrylates efficiency used as crystal inhibitors, stabilizers for suspended soil, and agents for soil redisposition prevention on fabric surface. The values of the whiteness and elongation at break for cotton fabrics increase with the increase of average weight molecular mass, Mw, up to the value of 70000 g/mol, while in the case of further increase of weight average molar mass up to the 250000 g/mol value of these characteristics begin to decline. The values of the total residue content after combustion indicate an increase in its content with the increase of weight average molar mass of 3000 to 70000 g/mol, while the highest value has been reached in the sample of detergent containing sodiumpolyacrilic with the weight average molar mass of 250000 g/mol. All detergent samples show no significant dependence of the secondary washing characteristics on the number of washing cycles.

  19. Neutral detergent fibre in piglet diets: digestibility, performance, and deposition of body nutrients

    Directory of Open Access Journals (Sweden)

    RAFAEL C. NEPOMUCENO

    2017-12-01

    Full Text Available ABSTRACT A total 120 piglets with an average live weight of 7.00 kg, weaned at 21 days, were used to evaluate the effect of neutral detergent fibre levels on the digestibility of nutrients and energy from the diets, productive performance, and the composition and rate of deposition of nutrients and energy in the bodies of piglets in the nursery phase. The animals were distributed according to a randomized-block design into five treatments, which consisted of neutral detergent fibre levels, with six replicates and four animals per plot. A quadratic effect was detected for the digestibility coefficients of nutrients and energy, feed intake and weight gain. The increase in fibre level promoted a linear increase in fat content in the carcass, blood, and body, whereas the energy in the carcass, organs, and body showed an inverse response. The results showed a quadratic effect on the nutrient deposition rate in the carcass, organs and body. In conclusion, the best digestibility of nutrients and energy from the diet is obtained with 10-11.5% neutral detergent fibre, as higher weight gain and greater protein deposition in the body are achieved at neutral detergent fibre levels of 10.6% and 10.3%, respectively.

  20. 40 CFR 80.156 - Liability for violations of the interim detergent program controls and prohibitions.

    Science.gov (United States)

    2010-07-01

    ... gasoline or detergent carrier caused the violation. (4) Volumetric additive reconciliation. Where a violation of the volumetric additive reconciliation requirements established by § 80.155(b) has occurred... violation of law (other than these regulations), or an act of sabotage or vandalism, whether or not such...

  1. Yeast Mitochondrial ADP/ATP Carriers Are Monomeric in Detergents as Demonstrated by Differential Affinity Purification

    NARCIS (Netherlands)

    Bamber, Lisa; Slotboom, Dirk-Jan; Kunji, Edmund R.S.; Barber, L

    2007-01-01

    Most mitochondrial carriers carry out equimolar exchange of substrates and they are believed widely to exist as homo-dimers. Here we show by differential tagging that the yeast mitochondrial ADP/ATP carrier AAC2 is a monomer in mild detergents. Carriers with and without six-histidine or

  2. Short-term effects of alcohol-based disinfectant and detergent on skin irritation

    DEFF Research Database (Denmark)

    Pedersen, Line Kynemund; Held, Elisabeth; Johansen, Jeanne Duus

    2005-01-01

    of 15 volunteers. A control area was included. After 4 weeks, a sodium lauryl sulfate patch was applied to each area. Irritant reactions were quantified by visual score, transepidermal water loss (TEWL) and skin colour at baseline, D3, D8, D35 and D37. As evaluated by clinical assessment, detergent...

  3. Jatropha Oil Derived Sophorolipids: Production and Characterization as Laundry Detergent Additive

    Directory of Open Access Journals (Sweden)

    Kasturi Joshi-Navare

    2013-01-01

    Full Text Available Sophorolipids (SLs are glycolipidic biosurfactants suitable for various biological and physicochemical applications. The nonedible Jatropha oil has been checked as the alternative raw material for SL synthesis using C. bombicola (ATCC22214. This is useful towards lowering the SL production cost. Through optimization of fermentation parameters and use of resting cell method, the yield 15.25 g/L could be achieved for Jatropha oil derived SL (SLJO with 1% v/v oil feeding. The synthesized SL displayed good surfactant property. It reduced the surface tension of distilled water from 70.7 mN/m to 33.5 mN/m with the Critical Micelle Concentration (CMC value of 9.5 mg/L. Keeping the prospective use of the SL in mind, the physicochemical properties were checked along with emulsion stability under temperature, pH stress, and in hard water. Also antibacterial action and stain removal capability in comparison with commercial detergent was demonstrated. SLJO enhanced the detergent performance. Based on the results, it can be said that SLs have utility as fabric cleaner with advantageous properties such as skin friendly nature, antibacterial action, and biodegradability. Therefore SLs are potential green molecules to replace synthetic surfactants in detergents so as to reduce harm caused to environment through detergent usage.

  4. Foam Properties and Detergent Abilities of the Saponins from Camellia oleifera

    Science.gov (United States)

    Chen, Yu-Fen; Yang, Chao-Hsun; Chang, Ming-Shiang; Ciou, Yong-Ping; Huang, Yu-Chun

    2010-01-01

    The defatted seed meal of Camellia oleifera has been used as a natural detergent and its extract is commercially utilized as a foam-stabilizing and emulsifying agent. The goal of this study was to investigate the foam properties and detergent ability of the saponins from the defatted seed meal of C. oleifera. The crude saponin content in the defatted seed meal of C. oleifera was 8.34 and the total saponins content in the crude saponins extract was 39.5% (w/w). The foaming power of the 0.5 crude saponins extract solution from defatted seed meal of C. oleifera was 37.1 of 0.5 SLS solution and 51.3% to that of 0.5% Tween 80 solution. The R5 value of 86.0% represents good foam stability of the crude saponins extracted from the defatted seed meal of the plant. With the reduction of water surface tension from 72 mN/m to 50.0 mN/m, the 0.5% crude saponins extract solution has wetting ability. The sebum-removal experiment indicated that the crude saponins extract has moderate detergency. The detergent abilities of the saponins from C. oleifera and Sapindus mukorossi were also compared. PMID:21151446

  5. Delipidation of the phosphatidylcholine exchange protein from beef liver by detergents

    NARCIS (Netherlands)

    Kamp, H.H.; Wirtz, K.W.A.; Deenen, L.L.M. van

    1975-01-01

    1. 1. A method is described to introduce [14C]phosphatidylcholine into the phosphatidylcholine exchange protein from beef liver. The effects of various detergents on this 14C-labelled phospholipid · protein complex are considered. 2. 2. As shown by spectrophotometric and radioactivity analysis of

  6. Non-immunological precipitation by the neutral detergent triton X-100 in agar gel diffusion.

    OpenAIRE

    Mansheim, B J; Stenstrom, M L

    1980-01-01

    Triton X-100 can be used to clarify vague immunoprecipitin lines from bacterial antigens; however, non-immunological precipitation can lead to mistaken interpretation of immunodiffusion results. If Triton X-100 is added directly to the gel during preparation rather than to the antigen well, this detergent artifact can be eliminated.

  7. A two-year monitoring study on anionic detergent, phosphate and ...

    African Journals Online (AJOL)

    Anionic detergent, phosphate and chlorophyll-a concentrations were evaluated in Istanbul Strait between January 2013 and December 2014. Water samples were taken monthly at one station in the strait. The average concentrations of phosphate were 1.38 mg L-1 for surface water and 1.76 mg L -1 for bottom water in 2013 ...

  8. Photosystem II solubilizes as a monomer by mild detergent treatment of unstacked thylakoid membranes

    NARCIS (Netherlands)

    Dekker, Jan P.; Germano, Marta; Roon, Henny van; Boekema, Egbert J.

    2002-01-01

    We studied the aggregation state of Photosystem II in stacked and unstacked thylakoid membranes from spinach after a quick andmild solubilization with the non-ionic detergent n-dodecyl-α,D-maltoside, followed by analysis by diode-array-assisted gel filtration chromatography and electron microscopy.

  9. A newly high alkaline lipase: an ideal choice for application in detergent formulations

    Directory of Open Access Journals (Sweden)

    Cherif Slim

    2011-11-01

    Full Text Available Abstract Background Bacterial lipases received much attention for their substrate specificity and their ability to function in extreme environments (pH, temperature.... Many staphylococci produced lipases which were released into the culture medium. Reports of thermostable lipases from Staphylococcus sp. and active in alkaline conditions are not previously described. Results A newly soil-isolated Staphylococcus sp. strain ESW secretes an induced lipase in the culture medium. The effects of temperature, pH and various components in a detergent on the activity and stability of Staphylococcus sp. lipase (SL1 were studied in a preliminary evaluation for use in detergent formulation solutions. The enzyme was highly active over a wide range of pH from 9.0 to 13.0, with an optimum at pH 12.0. The relative activity at pH 13.0 was about 60% of that obtained at pH 12.0. It exhibited maximal activity at 60°C. This novel lipase, showed extreme stability towards non-ionic and anionic surfactants after pre-incubation for 1 h at 40°C, and relative stability towards oxidizing agents. Additionally, the crude enzyme showed excellent stability and compatibility with various commercial solid and liquid detergents. Conclusions These properties added to the high activity in high alkaline pH make this novel lipase an ideal choice for application in detergent formulations.

  10. Fibrinolysis during liver transplantation is enhanced by using solvent/detergent virus-inactivated plasma (ESDEP)

    NARCIS (Netherlands)

    J. de Jonge (Jeroen); T.H.N. Groenland (Theo); H.J. Metselaar (Herold); L.E. Visser (Loes); H.W. Tilanus (Hugo); H.H.D.M. van Vliet (Huib); J.N.M. IJzermans (Jan)

    2002-01-01

    textabstractAfter the introduction of solvent/detergent-treated plasma (ESDEP) in our hospital, an increased incidence of hyperfibrinolysis was observed (75% vs 29%; P = 0.005) compared with the use of fresh frozen plasma for liver transplantation. To clarify this increased

  11. A ring test of in vitro neutral detergent fiber digestibility: Analytical variability and sample ranking

    Science.gov (United States)

    In vitro neutral detergent fiber (NDF) digestibility (NDFD) is an empirical measurement used to describe fermentability of NDF by rumen microbes. Variability is inherent in assays and affects the precision that can be expected for replicated samples. The study objective was to evaluate variability w...

  12. Allosteric transitions of Torpedo acetylcholine receptor in lipids, detergent and amphipols

    DEFF Research Database (Denmark)

    Martinez, Karen L.; Gohon, Yann; Corringer, Pierre Jean

    2002-01-01

    The binding of a fluorescent agonist to the acetycholine receptor from Torpedo electric organ has been studied by time-resolved spectroscopy in three different environments: in native membrane fragments, in the detergent CHAPS, and after complexation by amphipathic polymers ('amphipols'). Binding...

  13. Jatropha oil derived sophorolipids: production and characterization as laundry detergent additive.

    Science.gov (United States)

    Joshi-Navare, Kasturi; Khanvilkar, Poonam; Prabhune, Asmita

    2013-01-01

    Sophorolipids (SLs) are glycolipidic biosurfactants suitable for various biological and physicochemical applications. The nonedible Jatropha oil has been checked as the alternative raw material for SL synthesis using C. bombicola (ATCC22214). This is useful towards lowering the SL production cost. Through optimization of fermentation parameters and use of resting cell method, the yield 15.25 g/L could be achieved for Jatropha oil derived SL (SLJO) with 1% v/v oil feeding. The synthesized SL displayed good surfactant property. It reduced the surface tension of distilled water from 70.7 mN/m to 33.5 mN/m with the Critical Micelle Concentration (CMC) value of 9.5 mg/L. Keeping the prospective use of the SL in mind, the physicochemical properties were checked along with emulsion stability under temperature, pH stress, and in hard water. Also antibacterial action and stain removal capability in comparison with commercial detergent was demonstrated. SLJO enhanced the detergent performance. Based on the results, it can be said that SLs have utility as fabric cleaner with advantageous properties such as skin friendly nature, antibacterial action, and biodegradability. Therefore SLs are potential green molecules to replace synthetic surfactants in detergents so as to reduce harm caused to environment through detergent usage.

  14. EMERGInG RISKS In SMART PROCESS InDUSTRY CRAnES SURVEY: SAF€RA RESEARCH PROJECT SPRInCE

    Directory of Open Access Journals (Sweden)

    Vesna Spasojević Brkić

    2015-11-01

    Full Text Available Current accident theories show that the solution to avoid human error cannot be based on focusing only on the correction of operators’ behavior, but needs certain innovation that will help to keep an error away. Since, as evidenced by several incident surveys, cranes are the most dangerous equipment in industrial and construction sites and human error is the most frequent cause of accidents, in this frame the crane navigation system is an important and challenging component, with a great potential for safety improvement. However, as the emerging and rapid development of new technologies aims improving the working conditions and environment through solutions regarding existing well-known problems in occupational safety, their implementation also could lead to emerging hazards and risks that must be taken into account and managed. Based on these facts, SPRINCE (Smart PRocess INdustry CranEs project aims implementing a real-time object detection solution, which deals with cranes’ tracking systems and incorporates visual feedback, developing and implementing an innovative tool for evaluation of organizational and human (operator-specific factors. These factors will be included in the risk indicators of the implemented real-time object detection solution using case studies approach.

  15. Strategic Actions for Increasing the Submission of Digital Cadastral Data by the Surveying Industry Based on Lessons Learned from Victoria, Australia

    Directory of Open Access Journals (Sweden)

    Hamed Olfat

    2018-02-01

    Full Text Available ePlan, as a digital cadastral data initiative, is a collaborative program between the land authorities and the surveying industry which aims to replace paper and PDF cadastral plans and surveys with digital data. ePlan is currently operational in Australia, New Zealand and Singapore. ePlan was introduced in the State of Victoria in 2011 and has been operational in this jurisdiction for 2D plans since 2013. On average, one ePlan application is currently submitted to a digital plan lodgment portal every two weeks. The low uptake of ePlan is caused by several technical and non-technical challenges. This paper provides an overview of cadastral information transitioning from paper to digital in Victoria. The research methodology to identify the challenges in Victoria for the adoption of ePlan is then described. This is followed by a discussion on the identified challenges. The paper then proposes a generic framework of strategic actions to increase the uptake of digital cadastral data based on the lessons learned from Victoria. The initiatives suggested by this framework to address the ePlan challenges in Victoria and increase its uptake are also introduced. The paper concludes with a direction for future research.

  16. Survey of the trend of technical development and industrial policies in Asian countries; Asia shokoku ni okeru gijutsu kaihatsu no doko to sangyo gijutsu seisaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A sharp rise in industrial productivity in Asia countries indicates a rising level of R and D technology. Since Japan has not clearly grasped the R and D ability in these countries, it has not given appropriate personnel/material R and D support to them. Therefore, for the purpose of exactly grasping the R and D ability of Asian countries (Korea, Taiwan, the Philippines, Indonesia and India) and studying an effective and appropriate method for R and D cooperation, a survey was conducted of R and D potentials in Asia and R and D support policies of the countries. As a result of the survey, the following are taken up as items to be considered: promotion of exchanges between Tsukuba, etc. in Japan and research/university towns and science parks being constructed in lots of countries, participation of private companies in high-tech joint work in cooperation with Japan, sending information from Japan using internet, etc. and exact grasp of needs at partner side, cooperation given to new comers without asking for research results (use of OB researchers, etc.) 25 refs., 39 figs., 59 tabs.

  17. [Conflict of interest with industry--a survey of nurses in the field of wound care in Germany, Australia and Switzerland].

    Science.gov (United States)

    Panfil, Eva-Maria; Zima, Karoline; Lins, Sabine; Köpke, Sascha; Langer, Gero; Meyer, Gabriele

    2014-06-01

    Nurses in the field of wound care are increasingly being courted by the wound industry. A survey regarding nurses' perceptions and participation in pharmaceutical marketing was conducted. Based on existing instruments, a standardized questionnaire (39 items, 5-point Likert scale) was developed. It was sent electronically and by mail to all nursing members of the Austrian Society for Vascular Care (ÖGvP), the German Wound Healing Society (DGfW e. V.) and the Swiss Association for Wound Care (SAfW). 178 nurses participated in the survey (75 % women; aged 27 - 70 years [median 45], 0 - 40 years [median 9] practice in the area of the wound care). Only about one fourth of the respondents (23,0 %) did not participate in pharmaceutical marketing last year. Generally small gifts were more frequently received than expensive gifts. Most of the nurses valued inexpensive gifts, educational gifts and gifts with patient benefit as appropriate. The majority of respondents consider themselves as less influenceable in decision making, compared to physicians. The behavior and attitude of nurses are ambivalent. The occurrence of conflict of interest is partly justified by perceived patient benefit. Lack of knowledge about the topic and social desirability could be the cause of an uncritical attitude. For a more critical approach education and ethical standards are necessary.

  18. Survey report in fiscal 2000 on the survey on how universities are contributing to promotion of IT industries in U.S.A.; 2000 nendo Beikoku ni okeru joho sangyo gijutsu shinko ni taisuru daigaku no koken jokyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to discuss the ways the Japanese universities should be in venture incubation and for IT industries, and taking measures thereon, surveys have been performed on the current status of the roles played by universities for the information industries in the U.S. as well as trends and measures taken therein. The problem that the U.S. universities are facing is that the superiority of learning in business schools has become more indistinct than in experiencing and learning the business in venture companies. As a result, the number of people who want to enter business schools is decreasing. Therefore, universities are executing audacious innovations including reorganization of the curriculums. Representative examples are the UCLA's entrepreneurship program combining the electric engineering department and the business school, and the Stamford University's marketing skill development course for engineers. An organizational activity is also being taken to mediate dialogues between business entities and actual investors with a university working as the center, such as the one in MIT Enterprise Forum. (NEDO)

  19. Survey report in fiscal 2000 on the survey on how universities are contributing to promotion of IT industries in U.S.A.; 2000 nendo Beikoku ni okeru joho sangyo gijutsu shinko ni taisuru daigaku no koken jokyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to discuss the ways the Japanese universities should be in venture incubation and for IT industries, and taking measures thereon, surveys have been performed on the current status of the roles played by universities for the information industries in the U.S. as well as trends and measures taken therein. The problem that the U.S. universities are facing is that the superiority of learning in business schools has become more indistinct than in experiencing and learning the business in venture companies. As a result, the number of people who want to enter business schools is decreasing. Therefore, universities are executing audacious innovations including reorganization of the curriculums. Representative examples are the UCLA's entrepreneurship program combining the electric engineering department and the business school, and the Stamford University's marketing skill development course for engineers. An organizational activity is also being taken to mediate dialogues between business entities and actual investors with a university working as the center, such as the one in MIT Enterprise Forum. (NEDO)

  20. Competitive Advantage and Marketing Performance (A Descriptive Survey on Oil Palm Plantation Industries in West Kalimantan Province

    Directory of Open Access Journals (Sweden)

    Nurmala Nurmala

    2018-03-01

    Full Text Available This research analyzes the competitive advantage in order to enhance the marketing performance of oil palm plantation companies in West Kalimantan Province, which aims to: (1 find out the implementation of competitive advantage of the oil palm plantation companies in West Kalimantan Province, (2 find out the achievement of marketing performance of the oil palm plantation companies in West Kalimantan Province, and (3 find out the influence of competitive advantage on the marketing performance of the oil palm plantation companies in West Kalimantan Province. This is a descriptive and verification research that uses a descriptive and explanatory survey on the analysis unit of oil palm plantation companies in West Kalimantan Province. The period of research implementation of two (2 years, divided into two stages; First Stage (2013 and Second Stage (2014. The data are collected using questionnaires as well as interviews and observations. The collected data are further processed using path analysis. The results of the First Stage (2013 research find that only few of the oil palm plantation companies in West Kalimantan Province are able to achieve the marketing performance in high category or above their expected target. This is presumed to be related to the weak competitiveness or competitive advantage of the companies as found in the results of descriptive analysis of this research. In order to understand more of such relatedness, it is necessary to conduct further research of the Second Stage (2014 focusing on investigating the influence of competitive advantage on the marketing performance of oil palm plantation companies in West Kalimantan Province.

  1. Food surveys for assessing chemical and dosimetric impacts near industrial sites; Enquetes alimentaires pour l'evaluation des impacts chimiques et dosimetriques a proximite de sites nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Parache, V.; Maurau, S.; Mercat, C.

    2011-03-15

    Estimating the ingestion of potentially contaminated foodstuffs around conventional and nuclear industrial sites requires data about the food practices and eating habits of the local residents, especially the consumption of locally- and home-produced food. The IRSN thus chose to conduct surveys about these practices in the vicinity of nuclear sites. Their methodology was based on previous surveys near nuclear sites. In 2004, in partnership with AREVA and BEGEAT, the French Institute for Radioprotection and Nuclear Safety studied the eating habits of the residents of Bollene, near the Tricastin plant (Rhone Valley), with the aim of improving the quantification of the plant's potential health impacts. Based on these studies and as part of the SENSIB project to characterize vulnerability to nuclear risks, we developed and tested a survey protocol during the summer 2008, around the Chinon nuclear plant, in collaboration with EDF. The protocol is currently being tested around the Marcoule nuclear plant, in collaboration with the CEA. The aim was to optimize the feasibility and the reproducibility of the approach, while losing none of the robustness of the results. The data obtained made it possible to evaluate daily food intake values for individuals and to assess the rates of consumption of locally-grown products for many food categories. The data showed the existence of local population groups with very high rates of locally-grown food consumption - over 90 % of certain food products. This comparative study thus shows the significant variability of eating habits in the French population and proposes a reproducible approach to evaluating realistic indicators of potentially risky dietary habits. (authors)

  2. Role of Detergents in Conformational Exchange of a G Protein-coupled Receptor*

    Science.gov (United States)

    Chung, Ka Young; Kim, Tae Hun; Manglik, Aashish; Alvares, Rohan; Kobilka, Brian K.; Prosser, R. Scott

    2012-01-01

    The G protein-coupled β2-adrenoreceptor (β2AR) signals through the heterotrimeric G proteins Gs and Gi and β-arrestin. As such, the energy landscape of β2AR-excited state conformers is expected to be complex. Upon tagging Cys-265 of β2AR with a trifluoromethyl probe, 19F NMR was used to assess conformations and possible equilibria between states. Here, we report key differences in β2AR conformational dynamics associated with the detergents used to stabilize the receptor. In dodecyl maltoside (DDM) micelles, the spectra are well represented by a single Lorentzian line that shifts progressively downfield with activation by appropriate ligand. The results are consistent with interconversion between two or more states on a time scale faster than the greatest difference in ligand-dependent chemical shift (i.e. >100 Hz). Given that high detergent off-rates of DDM monomers may facilitate conformational exchange between functional states of β2AR, we utilized the recently developed maltose-neopentyl glycol (MNG-3) diacyl detergent. In MNG-3 micelles, spectra indicated at least three distinct states, the relative populations of which depended on ligand, whereas no ligand-dependent shifts were observed, consistent with the slow exchange limit. Thus, detergent has a profound effect on the equilibrium kinetics between functional states. MNG-3, which has a critical micelle concentration in the nanomolar regime, exhibits an off-rate that is 4 orders of magnitude lower than that of DDM. High detergent off-rates are more likely to facilitate conformational exchange between distinct functional states associated with the G protein-coupled receptor. PMID:22893704

  3. Laundry Detergency of Solid Non-Particulate Soil Using Microemulsion-Based Formulation.

    Science.gov (United States)

    Chanwattanakit, Jarussri; Chavadej, Sumaeth

    2018-02-01

    Laundry detergency of solid non-particulate soil on polyester and cotton was investigated using a microemulsion-based formulation, consisting of an anionic extended surfactant (C 12,13 -4PO-SO 4 Na) and sodium mono-and di-methyl naphthalene sulfonate (SMDNS) as the hydrophilic linker, to provide a Winsor Type III microemulsion with an ultralow interfacial tension (IFT). In this work, methyl palmitate (palmitic acid methyl ester) having a melting point around 30°C, was used as a model solid non-particulate (waxy) soil. A total surfactant concentration of 0.35 wt% of the selected formulation (4:0.65 weight ratio of C 12,13 -4PO-SO 4 Na:SMDNS) with 5.3 wt% NaCl was able to form a middle phase microemulsion at a high temperature (40°C),which provided the highest oil removal level with the lowest oil redeposition and the lowest IFT, and was much higher than that with a commercial detergent or de-ionized water. Most of the detached oil, whether in liquid or solid state, was in an unsolubilized form. Hence, the dispersion stability of the detached oil droplets or solidified oil particles that resulted from the surfactant adsorption played an important role in the oil redeposition. For an oily detergency, the lower the system IFT, the higher the oil removal whereas for a waxy (non-particulate) soil detergency, the lower the contact angle, the higher the solidified oil removal. For a liquefied oil, the detergency mechanism was roll up and emulsification with dispersion stability, while that for the waxy soil (solid oil) was the detachment by wettability with dispersion stability.

  4. Characterization of Hydrophobic Peptides in the Presence of Detergent by Photoionization Mass Spectrometry

    Science.gov (United States)

    Bagag, Aïcha; Jault, Jean-Michel; Sidahmed-Adrar, Nazha; Réfrégiers, Matthieu; Giuliani, Alexandre; Le Naour, François

    2013-01-01

    The characterization of membrane proteins is still challenging. The major issue is the high hydrophobicity of membrane proteins that necessitates the use of detergents for their extraction and solubilization. The very poor compatibility of mass spectrometry with detergents remains a tremendous obstacle in studies of membrane proteins. Here, we investigated the potential of atmospheric pressure photoionization (APPI) for mass spectrometry study of membrane proteins. This work was focused on the tetraspanin CD9 and the multidrug transporter BmrA. A set of peptides from CD9, exhibiting a broad range of hydropathicity, was investigated using APPI as compared to electrospray ionization (ESI). Mass spectrometry experiments revealed that the most hydrophobic peptides were hardly ionized by ESI whereas all peptides, including the highly hydrophobic one that corresponds to the full sequence of the first transmembrane domain of CD9, were easily ionized by APPI. The native protein BmrA purified in the presence of the non-ionic detergent beta-D-dodecyl maltoside (DDM) was digested in-solution using trypsin. The resulting peptides were investigated by flow injection analysis of the mixture followed by mass spectrometry. Upon ESI, only detergent ions were detected and the ionic signals from the peptides were totally suppressed. In contrast, APPI allowed many peptides distributed along the sequence of the protein to be detected. Furthermore, the parent ion corresponding to the first transmembrane domain of the protein BmrA was detected under APPI conditions. Careful examination of the APPI mass spectrum revealed a-, b-, c- and y- fragment ions generated by in-source fragmentation. Those fragment ions allowed unambiguous structural characterization of the transmembrane domain. In conclusion, APPI–MS appears as a versatile method allowing the ionization and fragmentation of hydrophobic peptides in the presence of detergent. PMID:24236085

  5. Characterization of hydrophobic peptides in the presence of detergent by photoionization mass spectrometry.

    Directory of Open Access Journals (Sweden)

    Aïcha Bagag

    Full Text Available The characterization of membrane proteins is still challenging. The major issue is the high hydrophobicity of membrane proteins that necessitates the use of detergents for their extraction and solubilization. The very poor compatibility of mass spectrometry with detergents remains a tremendous obstacle in studies of membrane proteins. Here, we investigated the potential of atmospheric pressure photoionization (APPI for mass spectrometry study of membrane proteins. This work was focused on the tetraspanin CD9 and the multidrug transporter BmrA. A set of peptides from CD9, exhibiting a broad range of hydropathicity, was investigated using APPI as compared to electrospray ionization (ESI. Mass spectrometry experiments revealed that the most hydrophobic peptides were hardly ionized by ESI whereas all peptides, including the highly hydrophobic one that corresponds to the full sequence of the first transmembrane domain of CD9, were easily ionized by APPI. The native protein BmrA purified in the presence of the non-ionic detergent beta-D-dodecyl maltoside (DDM was digested in-solution using trypsin. The resulting peptides were investigated by flow injection analysis of the mixture followed by mass spectrometry. Upon ESI, only detergent ions were detected and the ionic signals from the peptides were totally suppressed. In contrast, APPI allowed many peptides distributed along the sequence of the protein to be detected. Furthermore, the parent ion corresponding to the first transmembrane domain of the protein BmrA was detected under APPI conditions. Careful examination of the APPI mass spectrum revealed a-, b-, c- and y- fragment ions generated by in-source fragmentation. Those fragment ions allowed unambiguous structural characterization of the transmembrane domain. In conclusion, APPI-MS appears as a versatile method allowing the ionization and fragmentation of hydrophobic peptides in the presence of detergent.

  6. Characterization of detergent-solubilized sarcoplasmic reticulum Ca2+-ATPase by high-performance liquid chromatography

    International Nuclear Information System (INIS)

    Andersen, J.P.; Vilsen, B.; Nielsen, H.; Moller, J.V.

    1986-01-01

    Sarcoplasmic reticulum Ca 2+ -ATPase solubilized by the nonionic detergent octaethylene glycol monododecyl ether was studied by molecular sieve high-performance liquid chromatography (HPLC) and analytical ultracentrifugation. Significant irreversible aggregation of soluble Ca 2+ -ATPase occurred within a few hours in the presence of ≤ 50 μM Ca 2+ . The aggregates were inactive and were primarily held together by hydrophobic forces. In the absence of reducing agent, secondary formation of disulfide bonds occurred. The stability of the inactive dimer upon dilution permitted unambiguous assignment of its elution position and sedimentation coefficient. At high 45 Ca 2+ concentration (500 μM), monomeric Ca 2+ -ATPase was stable for several house. Reversible self-association induced by variation in protein, detergent, and lipid concentrations was studied by large-zone HPLC. The association constant for dimerization of active Ca 2+ -ATPase was found to be 10 5 -10 6 M -1 depending on the detergent concentration. More detergent was bound to monomeric than to dimeric Ca 2+ -ATPase, even above the critical micellar concentration of the detergent. Binding of Ca 2+ and 48 V vanadate as well as ATP-dependent phosphorylation was studied in monomeric and in reversibly associated dimeric preparations. In both forms, two high-affinity Ca 2+ binding sites per phosphorylation site existed. The delipidated monomer purified by HPLC was able to form ADP-insensitive phosphoenzyme and to bind ATP and vanadate simultaneously. The results suggest that formation of Ca 2+ -ATPase oligomers in the membrane is governed by nonspecific forces (low affinity) and that each polypeptide chain constitutes a functional unit

  7. Fatty acid profiles from the plasma membrane and detergent resistant membranes of two plant species.

    Science.gov (United States)

    Carmona-Salazar, Laura; El Hafidi, Mohammed; Gutiérrez-Nájera, Nora; Noyola-Martínez, Liliana; González-Solís, Ariadna; Gavilanes-Ruíz, Marina

    2015-01-01

    It is essential to establish the composition of the plant plasma membrane in order to understand its organization and behavior under continually changing environments. Knowledge of the lipid phase, in particular the fatty acid (FA) complex repertoire, is important since FAs determine many of the physical-chemical membrane properties. FAs are constituents of the membrane glycerolipid and sphingolipid backbones and can also be linked to some sterols. In addition, FAs are components of complex lipids that can constitute membrane micro-domains, and the use of detergent-resistant membranes is a common approach to study their composition. The diversity and cellular allocation of the membrane lipids containing FAs are very diverse and the approaches to analyze them provide only general information. In this work, a detailed FA analysis was performed using highly purified plasma membranes from bean leaves and germinating maize embryos and their respective detergent-resistant membrane preparations. The analyses showed the presence of a significant amount of very long chain FAs (containing 28C, 30C and 32C), in both plasma membrane preparations from bean and maize, that have not been previously reported. Herein is demonstrated that a significant enrichment of very long chain saturated FAs and saturated FAs can occur in detergent-resistant membrane preparations, as compared to the plasma membranes from both plant species. Considering that a thorough analysis of FAs is rarely performed in purified plasma membranes and detergent-resistant membranes, this work provides qualitative and quantitative evidence on the contributions of the length and saturation of FAs to the organization of the plant plasma membrane and detergent-resistant membranes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Role of detergents in conformational exchange of a G protein-coupled receptor.

    Science.gov (United States)

    Chung, Ka Young; Kim, Tae Hun; Manglik, Aashish; Alvares, Rohan; Kobilka, Brian K; Prosser, R Scott

    2012-10-19

    The G protein-coupled β(2)-adrenoreceptor (β(2)AR) signals through the heterotrimeric G proteins G(s) and G(i) and β-arrestin. As such, the energy landscape of β(2)AR-excited state conformers is expected to be complex. Upon tagging Cys-265 of β(2)AR with a trifluoromethyl probe, (19)F NMR was used to assess conformations and possible equilibria between states. Here, we report key differences in β(2)AR conformational dynamics associated with the detergents used to stabilize the receptor. In dodecyl maltoside (DDM) micelles, the spectra are well represented by a single Lorentzian line that shifts progressively downfield with activation by appropriate ligand. The results are consistent with interconversion between two or more states on a time scale faster than the greatest difference in ligand-dependent chemical shift (i.e. >100 Hz). Given that high detergent off-rates of DDM monomers may facilitate conformational exchange between functional states of β(2)AR, we utilized the recently developed maltose-neopentyl glycol (MNG-3) diacyl detergent. In MNG-3 micelles, spectra indicated at least three distinct states, the relative populations of which depended on ligand, whereas no ligand-dependent shifts were observed, consistent with the slow exchange limit. Thus, detergent has a profound effect on the equilibrium kinetics between functional states. MNG-3, which has a critical micelle concentration in the nanomolar regime, exhibits an off-rate that is 4 orders of magnitude lower than that of DDM. High detergent off-rates are more likely to facilitate conformational exchange between distinct functional states associated with the G protein-coupled receptor.

  9. Report on the achievements in fiscal 1999. Surveys on the foundation for establishing industrial technology strategies (Foundation and environment improving strategies - an overall survey); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kiban kankyo seibi senryaku (zentai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Surveys were performed on the foundation for technological innovation in Japan and other countries. Main findings obtained from the actual state survey were compiled from the two aspects of 'items having difference in international comparison' and 'main findings by nucleuses and functions'. In order to activate the economy stagnated in the 1980's, America has developed strong industrial technology policies under the initiative of the government to strengthen the competitive edge, and the result thereof appears linking with the briskness in the today's U.S. economy. In Japan, the non-competitive fund distributed uniformly to national universities and national research institutes accounts for the majority in the governmental research fund. In contrast, many of the research funds of the U.S. government are the competitive fund, whereas researchers perform their research works using these funds, including their own labor cost, and the competition is intense. America is regarded to have put a huge amount of national defense research expense and space development research expense into private business entities, which are playing a large role in developing advanced technologies. A great amount of governmental fund is injected concentratedly into researches of health, medical and bio-technologies. (NEDO)

  10. Report on the achievements in fiscal 1999. Surveys on the foundation for establishing industrial technology strategies (Foundation and environment improving strategies - an overall survey); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kiban kankyo seibi senryaku (zentai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Surveys were performed on the foundation for technological innovation in Japan and other countries. Main findings obtained from the actual state survey were compiled from the two aspects of 'items having difference in international comparison' and 'main findings by nucleuses and functions'. In order to activate the economy stagnated in the 1980's, America has developed strong industrial technology policies under the initiative of the government to strengthen the competitive edge, and the result thereof appears linking with the briskness in the today's U.S. economy. In Japan, the non-competitive fund distributed uniformly to national universities and national research institutes accounts for the majority in the governmental research fund. In contrast, many of the research funds of the U.S. government are the competitive fund, whereas researchers perform their research works using these funds, including their own labor cost, and the competition is intense. America is regarded to have put a huge amount of national defense research expense and space development research expense into private business entities, which are playing a large role in developing advanced technologies. A great amount of governmental fund is injected concentratedly into researches of health, medical and bio-technologies. (NEDO)

  11. Contribution of industry funded post-marketing studies to drug safety: survey of notifications submitted to regulatory agencies

    Science.gov (United States)

    Prugger, Christof; Doshi, Peter; Ostrowski, Kerstin; Witte, Thomas; Hüsgen, Dieter; Keil, Ulrich

    2017-01-01

    Objectives To investigate the practice of post-marketing studies in Germany during a three year period and to evaluate whether these trials meet the aims specified in the German Medicinal Products Act. Design Survey of notifications submitted to German regulatory agencies before post-marketing studies were carried out, 2008-10. Setting Notifications obtained through freedom of information requests to the three authorities responsible for registering post-marketing studies in Germany. Main outcome measures Descriptive statistics of post-marketing studies, including the products under study, intended number of patients, intended number of participating physicians, proposed remunerations, study plan and protocol, and availability of associated scientific publications and reports on adverse drug reactions. Results Information was obtained from 558 studies, with a median of 600 (mean 2331, range 2-75 000) patients and 63 (270, 0-7000) participating physicians per study. The median remuneration to physicians per patient was €200 (€441, €0-€7280) (£170, £0-£6200; $215, $0-$7820), with a total remuneration cost of more than €217m for 558 studies registered over the three year period. The median remuneration per participating physician per study was €2000 (mean €19 424), ranging from €0 to €2 080 000. There was a broad range of drugs and non-drug products, of which only a third represented recently approved drugs. In many notifications, data, information, and results were, by contract, strictly confidential and the sole property of the respective sponsor. No single adverse drug reaction report could be identified from any of the 558 post-marketing studies. Less than 1% of studies could be verified as published in scientific journals. Conclusions Post-marketing studies are not improving drug safety surveillance. Sample sizes are generally too small to allow the detection of rare adverse drug reactions, and many participating physicians are

  12. FY 1999 report on the survey of the history/inheritance of industrial technology. Survey of originality and creativity in electric/electronic technology in the Japanese industry; 1999 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Kokunai sangyo no denki densi gijutsu no dokusosei to sozosei no chosa hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of clarifying the course of promotion of the original/creative future R and D and contributing to selection of technical themes and working-out of developmental methods, the paper conducted a survey of listening to Mr. S. Saba, Mr. Y. Hirose and Mr. K. Fujimori who are honorary members of the Institute of Electrical Engineers of Japan. For the survey, the following points were taken notice of: to fully make prior preparation; to supplement/prove what was presented and to have a lot of data by which objectivity was given to what was presented; to keep a balance between 'reminiscences' which are useful for completion of the details and the details focused; to establish the analysis method of the details of the listening; to be careful to make analysis of technology and persons so that the listening survey can be connected to the systematical arrangement; to look for 'good listeners.' As a result of the listening survey, a lot of the suggestive results seemed to be obtained in terms of the innovation of the industrial technology that has been shouldering the development of Japan and the originality/creativity seen in the innovation. (NEDO)

  13. An organic solvent-, detergent-, and thermo-stable alkaline protease from the mesophilic, organic solvent-tolerant Bacillus licheniformis 3C5.

    Science.gov (United States)

    Rachadech, W; Navacharoen, A; Ruangsit, W; Pongtharangkul, T; Vangnai, A S

    2010-01-01

    Bacillus licheniformis 3C5, isolated as mesophilic bacterium, exhibited tolerance towards a wide range of non-polar and polar organic solvents at 45 degrees C. It produced an extracellular organic solvent-stable protease with an apparent molecular mass of approximately 32 kDa. The inhibitory effect of PMSF and EDTA suggested it is likely to be an alkaline serine protease. The protease was active over abroad range of temperatures (45-70 degrees C) and pH (8-10) range with an optimum activity at pH 10 and 65 degrees C. It was comparatively stable in the presence ofa relatively high concentration (35% (v/v)) of organic solvents and various types of detergents even at a relatively high temperature (45 degrees C). The protease production by B. licheniformis 3C5 was growth-dependent. The optimization of carbon and nitrogen sources for cell growth and protease production revealed that yeast extract was an important medium component to support both cell growth and the protease production. The overall properties of the protease produced by B. licheniformis 3C5 suggested that this thermo-stable, solvent-stable, detergent-stable alkaline protease is a promising potential biocatalyst for industrial and environmental applications.

  14. Production of surfactant and detergent-stable, halophilic, and alkalitolerant alpha-amylase by a moderately halophilic Bacillus sp. Strain TSCVKK.

    Science.gov (United States)

    Kiran, Kondepudi Kanthi; Chandra, T S

    2008-01-01

    A moderately halophilic alkalitolerant Bacillus sp. Strain TSCVKK, with an ability to produce extracellular halophilic, alkalitolerant, surfactant, and detergent-stable alpha-amylase was isolated from soil samples obtained from a salt-manufacturing industry in Chennai. The culture conditions for higher amylase production were optimized with respect to NaCl, substrate, pH, and temperature. Maximum amylase production of 592 mU/ml was achieved in the medium at 48 h with 10% NaCl, 1% dextrin, 0.4% yeast extract, 0.2% tryptone, and 0.2% CaCl(2) at pH 8.0 at 30 degrees C. The enzyme activity in the culture supernatant was highest with 10% NaCl at pH 7.5 and 55 degrees C. The amylase that was partially purified by acetone precipitation was highly stable in various surfactants and detergents. Glucose, maltose, and maltooligosaccharides were the main end products of starch hydrolysis indicating that it is an alpha-amylase.

  15. Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

  16. Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

  17. Report on surveys in fiscal 1999. Foundational survey for establishing strategies for industrial technology (surveys on strategies for establishing priorities and improving intellectual foundation); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa. Jutenka senryaku chiteki kiban seibi chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to promote technological developments smoothly, surveys and discussions were given on how the improvements in intellectual foundations are worked out inside and outside the country. In surveying the status of improving the databases inside and outside the country, it was disclosed that the databases both inside and outside the country are arranged under the auspices of the governments. The reason for this is considered because the intellectual foundation improvement is difficult to be established as a business. In order to structure a framework to put together and publicize the data including those possessed by the private sector, surveys and discussions were given on the interest among titles to intellectual properties, contractual relationship between the database improving parties and the data providing parties, relationship with taxation systems, and how the incentives should be provided for publicizing the data. In discussing a model case to utilize data acquired by the private sector, it was concluded that assistance by the governments is indispensable for the organizations for structuring and maintaining the databases to continue their activities independently. Among the data measured and managed at the national level, problems in the publicizing method thereof were discussed especially on the data related to ocean information. (NEDO)

  18. Formerly utilized MED/AEC sites remedial action program: radiological survey of the Museum of Science and Industry, 57th Street and Lake Shore Drive, Chicago, Illinois. Final report

    International Nuclear Information System (INIS)

    1979-02-01

    From August 15, 1946 until July 15, 1953, ANL occupied part of the Museum of Science and Industry in Chicago; some handling of radioactive materials took place. In a radiation survey taken of the areas in 1977, instrument and smear surveys were made, and air and soil samples were counted. Results indicate there is no identifiable residual radioactivity remaining from MED/AEC operations during the period 1946 through 1953

  19. In vitro evaluation on neutral detergent fiber and cellulose digestion by post-ruminal microorganisms in goats.

    Science.gov (United States)

    Jiao, Jinzhen; Wang, Pengpeng; He, Zhixiong; Tang, Shaoxun; Zhou, Chuanshe; Han, Xuefeng; Wang, Min; Wu, Duanqin; Kang, Jinhe; Tan, Zhiliang

    2014-07-01

    Post-ruminal digestion of fiber has received much less attention than its ruminal digestion. Using in vitro incubation techniques, the present study explored whether variations in fiber digestion occurred in different segments of the post-ruminal tract and whether fiber structure could influence its digestibility. A split plot design was conducted with gut segments (jejunum, ileum, cecum and colon) as main plot and substrates (neutral detergent fiber (NDF) and cellulose (CEL)) as subplot. With the same substrate, the final asymptotic gas volume (V(F)), gas production at t(i) (V(t(i)), digestibility, microbial crude protein (MCP), total bacteria number (TBN), total short-chain fatty acids (TSCFA) and xylanase in incocula from the cecum and colon exceeded (P production, digestibility, enzyme activities and SCFA but lower pH and NH3-N. The current results imply that the intestinal contents from the cecum and colon have greater potential to digest fiber than those from the jejunum and ileum, and CEL is more easily digested in the post-ruminal tract than NDF. © 2013 Society of Chemical Industry.

  20. Contemporary formulation and distribution practices for cold-filled acid products: Australian industry survey and modeling of published pathogen inactivation data.

    Science.gov (United States)

    Chapman, B; Scurrah, K J; Ross, T

    2010-05-01

    A survey of 12 Australian manufacturers indicated that mild-tasting acids and preservatives are used to partially replace acetic acid in cold-filled acid dressings and sauces. In contrast to traditional ambient temperature distribution practices, some manufacturers indicated that they supply the food service sector with cold-filled acid products prechilled for incorporation into ready-to-eat foods. The Comité des Industries des Mayonnaises et Sauces Condimentaires de la Communauté Economique Européenne (CIMSCEE) Code, a formulation guideline used by the industry to predict the safety of cold-filled acid formulations with respect to Salmonella enterica and Escherichia coli, does not extend to the use of acids and preservatives other than acetic acid nor does it consider the effects of chill distribution. We found insufficient data in the published literature to comprehensively model the response of S. enterica and E. coli to all of the predictor variables (i.e., pH, acetic acid, NaCl, sugars, other acids, preservatives, and storage temperature) of relevance for contemporary cold-filled acid products in Australia. In particular, we noted a lack of inactivation data for S. enterica at aqueous-phase NaCl concentrations of >3% (wt/wt). However, our simple models clearly identified pH and 1/absolute temperature of storage as the most important variables generally determining inactivation. To develop robust models to predict the effect of contemporary formulation and storage variables on product safety, additional empirical data are required. Until such models are available, our results support challenge testing of cold-filled acid products to ascertain their safety, as suggested by the CIMSCEE, but suggest consideration of challenging with both E. coli and S. enterica at incubation temperatures relevant to intended product distribution temperatures.

  1. Wheat germ cell-free expression: Two detergents with a low critical micelle concentration allow for production of soluble HCV membrane proteins.

    Science.gov (United States)

    Fogeron, Marie-Laure; Badillo, Aurélie; Jirasko, Vlastimil; Gouttenoire, Jérôme; Paul, David; Lancien, Loick; Moradpour, Darius; Bartenschlager, Ralf; Meier, Beat H; Penin, François; Böckmann, Anja

    2015-01-01

    Membrane proteins are notoriously difficult to express in a soluble form. Here, we use wheat germ cell-free expression in the presence of various detergents to produce the non-structural membrane proteins 2, 4B and 5A of the hepatitis C virus (HCV). We show that lauryl maltose neopentyl glycol (MNG-3) and dodecyl octaethylene glycol ether (C12E8) detergents can yield essentially soluble membrane proteins at detergent concentrations that do not inhibit the cell-free reaction. This finding can be explained by the low critical micelle concentration (CMC) of these detergents, which keeps the monomer concentrations low while at the same time providing the necessary excess of detergent concentration above CMC required for full target protein solubilization. We estimate that a tenfold excess of detergent micelles with respect to the protein concentration is sufficient for solubilization, a number that we propose as a guideline for detergent screening assays. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Radio-induced oxidation of n-paraffins for obtaining biodegradable detergents; L'oxydation radioinduite des n-paraffines pour l'obtention de detergents biodegradables

    Energy Technology Data Exchange (ETDEWEB)

    Puig, J R; Laizier, J; Blin, M F; Marchand, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    N-paraffins oxidation is a feasible way to obtain biodegradable detergents. This reaction can be radio-initiated and it proceeds by a branched chain mechanism, with an induction pseudo-period. A suitable analysis of the reaction is allowed by the semi-logarithmic plot of its evolution. Influence of the different parameters of the reaction is studied, results show that the use of radiation for initiating the reaction is of no economical interest. (authors) [French] L'oxydation des n-paraffines est une voie possible d'obtention des detergents biodegradables. Cette reaction, qui peut etre radioinitiee, procede d'un mecanisme en chaine branchee et presente une pseudoperiode d'induction. La representation semi-logarithmique de l'avancement de la reaction permet une analyse commode de celle-ci. L'influence des differents parametres est etudiee. Les resultats montrent que l'utilisation du rayonnement pour l'initiation de la reaction est sans interet economique. (auteurs)

  3. Production of lipase and protease from an indigenous Pseudomonas aeruginosa strain and their evaluation as detergent additives: compatibility study with detergent ingredients and washing performance.

    Science.gov (United States)

    Grbavčić, Sanja; Bezbradica, Dejan; Izrael-Živković, Lidija; Avramović, Nataša; Milosavić, Nenad; Karadžić, Ivanka; Knežević-Jugović, Zorica

    2011-12-01

    An indigenous Pseudomonas aeruginosa strain has been studied for lipase and protease activities for their potential application in detergents. Produced enzymes were investigated in order to assess their compatibility with several surfactants, oxidizing agents and commercial detergents. The crude lipase appeared to retain high activity and stability in the presence of several surfactants and oxidizing agents and it was insusceptible to proteolysis. Lutensol® XP80 and Triton® X-100 strongly activated the lipase for a long period (up to 40 and 30% against the control after 1h) while the protease activity was enhanced by the addition of Triton® WR1339 and Tween® 80. The washing performance of the investigated surfactants was significantly improved with the addition of the crude enzyme preparation. Studies were further undertaken to improve enzymes production. The optimization of fermentation conditions led to an 8-fold increase of lipase production, while the production of protease was enhanced by 60%. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Report on the FY 1992 basic survey for industrialization related to the survey of overseas geological structure (Embalut West area, Indonesia); 1996 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa hokokusho (Indonesia Embalut nishi chiku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    The paper reported the FY 1992 basic survey for the coal mine development/industrialization in the Embalut West area of Indonesia. The geological structure in the survey area is under the Loa Haur Syncline which lies approximately north and south to the west of the area, and is regarded as the stabilized structure having no faults. The three beams from the upper part, S14, S13 and S12, are assumed to be the coal seams to be drilled. The average seam thickness is 1.17, 2.35 and 3.09m, respectively, and the continuity is good. In S14 beam, which is thin, it is difficult to mine coal using equipment. The theoretical minable reserve of the three coal seams is 18,859,000 tons. The recoverable coal reserve is 12,258,000 tons at a mining recovery of 65%. In case of annual production of 0.4 million tons, it is possible to mine more than 30 years. The coal is classified into a subbituminous coal-brown coal rank of the JIS coal classification. It is high in water content and medium in heating value, but is an environmental protection type with low ash and low sulfur content. In the case of mines in the Mahakam River basin, barge transport is indispensable. For sea transportation, the following should be studied in the light of the international price competition: reinforcement of shipping facilities on Mahakam River, increase in barge size, joint use of Balikpapan Coal Center, etc. (NEDO)

  5. Involvement of detergent-insoluble complexes in the intracellular transport of intestinal brush border enzymes

    DEFF Research Database (Denmark)

    Danielsen, E M

    1995-01-01

    A number of transmembrane digestive enzymes of the porcine small intestinal brush border membrane were found to be partially Triton X-100-insoluble at 0 degree C and colocalized in gradient centrifugation experiments with the GPI-anchored alkaline phosphatase in low-density, detergent-insoluble c...... intracellularly. I therefore propose that, in the enterocyte, the brush border enzymes are targeted directly from the trans-Golgi network toward the apical cell surface......., and their insolubility increased to that of the steady-state level soon after they achieved their mature, complex glycosylation, i.e., after passage through the Golgi complex. Detergent-insoluble complexes isolated by density gradient centrifugation were highly enriched in brush border enzymes, and the enrichment...

  6. Fast and accurate determination of the detergent efficiency by optical fiber sensors

    Science.gov (United States)

    Patitsa, Maria; Pfeiffer, Helge; Wevers, Martine

    2011-06-01

    An optical fiber sensor was developed to control the cleaning efficiency of surfactants. Prior to the measurements, the sensing part of the probe is covered with a uniform standardized soil layer (lipid multilayer), and a gold mirror is deposited at the end of the optical fiber. For the lipid multilayer deposition on the fiber, Langmuir-Blodgett technique was used and the progress of deposition was followed online by ultraviolet spectroscopy. The invention provides a miniaturized Surface Plasmon Resonance dip-sensor for automated on-line testing that can replace the cost and time consuming existing methods and develop a breakthrough in detergent testing in combining optical sensing, surface chemistry and automated data acquisition. The sensor is to be used to evaluate detergency of different cleaning products and also indicate how formulation, concentration, lipid nature and temperature affect the cleaning behavior of a surfactant.

  7. Detergents in the indoor environment - what is the evidence for an allergy promoting effect?

    DEFF Research Database (Denmark)

    Poulsen, Lars K.; Clausen, S K; Glue, C

    2000-01-01

    IgE-mediated allergic diseases, such as asthma and rhinitis seem to be increasing in industrialised societies. One possible explanation for this could be the increased use of more effective and aggressive detergents. The surfactants from these could interfere with the sensitisation process in which...... specific IgE is formed to ubiquitously occurring environmental allergens. Only sparse data exist in relation to surfactants and allergic sensitization. However, it can be speculated that the strong surfactant properties of some of ingredients used in modem detergents may interfere with some...... of the intricate cellular interactions taking place along the immunological pathways. These include formation of IL-4 and IL-5 producing T helper lymphocytes type 2 and the B-lymphocyte isotype switch, which leads to production of specific IgE. Candidates for experimental studies of such phenomena on the cellular...

  8. Reversible Dissolution of Microdomains in Detergent-Resistant Membranes at Physiological Temperature

    OpenAIRE

    Cremona, A.; Orsini, F.; Corsetto, P.A.; Hoogenboom, B.W.; Rizzo, A.M.

    2015-01-01

    The formation of lipid microdomains ("rafts") is presumed to play an important role in various cellular functions, but their nature remains controversial. Here we report on microdomain formation in isolated, detergent-resistant membranes from MDA-MB-231 human breast cancer cells, studied by atomic force microscopy (AFM). Whereas microdomains were readily observed at room temperature, they shrunk in size and mostly disappeared at higher temperatures. This shrinking in microdomain size was acco...

  9. Radio-induced oxidation of n-paraffins for obtaining biodegradable detergents

    International Nuclear Information System (INIS)

    Puig, J.R.; Laizier, J.; Blin, M.F.; Marchand, J.

    1968-01-01

    N-paraffins oxidation is a feasible way to obtain biodegradable detergents. This reaction can be radio-initiated and it proceeds by a branched chain mechanism, with an induction pseudo-period. A suitable analysis of the reaction is allowed by the semi-logarithmic plot of its evolution. Influence of the different parameters of the reaction is studied, results show that the use of radiation for initiating the reaction is of no economical interest. (authors) [fr

  10. Biochemical process of low level radioactive liquid simulation waste containing detergent

    International Nuclear Information System (INIS)

    Kundari, Noor Anis; Putra, Sugili; Mukaromah, Umi

    2015-01-01

    Research of biochemical process of low level radioactive liquid waste containing detergent has been done. Thse organic liquid wastes are generated in nuclear facilities such as from laundry. The wastes that are cotegorized as hazard and poison materials are also radioactive. It must be treated properly by detoxification of the hazard and decontamination of the radionuclides to ensure that the disposal of the waste meets the requirement of standard quality of water. This research was intended to determine decontamination factor and separation efficiensies, its kinetics law, and to produce a supernatant that ensured the environmental quality standard. The radioactive element in the waste was thorium with activity of 5.10 −5 Ci/m 3 . The radioactive liquid waste which were generated in simulation plant contains detergents that was further processed by aerobic biochemical process using SGB 103 bacteria in a batch reactor equipped with aerators. Two different concentration of samples were processed and analyzed for 212 hours and 183 hours respectively at a room temperature. The product of this process is a liquid phase called as supernatant and solid phase material called sludge. The chemical oxygen demand (COD), biological oxygen demand (BOD), suspended solid (SS), and its alpha activity were analyzed. The results show that the decontamination factor and the separation efficiency of the lower concentration samples are higher compared to the samples with high concentration. Regarding the decontamination factor, the result for 212 hours processing of waste with detergent concentration of 1.496 g/L was 3.496 times, whereas at the detergent concentration of 0.748 g/L was 15.305 times for 183 hours processing. In case of the separation efficiency, the results for both samples were 71.396% and 93.465% respectively. The Bacterial growth kinetics equation follow Monod’s model and the decreasing of COD and BOD were first order with the rate constant of 0.01 hour −1

  11. Detergent Isolation Stabilizes and Activates the Shigella Type III Secretion System Translocator Protein IpaC.

    Science.gov (United States)

    Bernard, Abram R; Duarte, Shari M; Kumar, Prashant; Dickenson, Nicholas E

    2016-07-01

    Shigella rely on a type III secretion system as the primary virulence factor for invasion and colonization of human hosts. Although there are an estimated 90 million Shigella infections, annually responsible for more than 100,000 deaths worldwide, challenges isolating and stabilizing many type III secretion system proteins have prevented a full understanding of the Shigella invasion mechanism and additionally slowed progress toward a much needed Shigella vaccine. Here, we show that the non-denaturing zwitterionic detergent N, N-dimethyldodecylamine N-oxide (LDAO) and non-ionic detergent n-octyl-oligo-oxyethylene efficiently isolated the hydrophobic Shigella translocator protein IpaC from the co-purified IpaC/IpgC chaperone-bound complex. Both detergents resulted in monomeric IpaC that exhibits strong membrane binding and lysis characteristics while the chaperone-bound complex does not, suggesting that the stabilizing detergents provide a means of following IpaC "activation" in vitro. Additionally, biophysical characterization found that LDAO provides significant thermal and temporal stability to IpaC, protecting it for several days at room temperature and brief exposure to temperatures reaching 90°C. In summary, this work identified and characterized conditions that provide stable, membrane active IpaC, providing insight into key interactions with membranes and laying a strong foundation for future vaccine formulation studies taking advantage of the native immunogenicity of IpaC and the stability provided by LDAO. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  12. Membrane microdomains, rafts, and detergent-resistant membranes in plants and fungi

    Czech Academy of Sciences Publication Activity Database

    Malínský, Jan; Opekarová, Miroslava; Grossmann, G.; Tanner, W.

    2013-01-01

    Roč. 64, April (2013), s. 501-529 ISSN 1543-5008 R&D Projects: GA ČR(CZ) GAP302/11/0146; GA ČR GAP205/12/0720 Institutional research plan: CEZ:AV0Z50390703 Institutional support: RVO:61388971 ; RVO:68378041 Keywords : membrane microdomain * lipid raft * detergent resistant membranes Subject RIV: EB - Genetics ; Molecular Biology; EA - Cell Biology (MBU-M) Impact factor: 18.900, year: 2013

  13. Detergents and bleaches are sources of chromium contact dermatitis in Israel

    DEFF Research Database (Denmark)

    Ingber, A; Gammelgaard, Bente; David, M

    1998-01-01

    Total chromium levels were determined in 38 detergents and 12 bleaches on the market in Israel (45 locally produced, 5 imported). The samples were analyzed by Zeeman-corrected graphite furnace atomic absorption spectrophotometry. Chromium levels were higher than 5 ppm in 28 (56%) of the 50 products...... ppm, it is concluded that these consumer products may be the cause of the high incidence of chromium sensitivity in Israel....

  14. Biochemical process of low level radioactive liquid simulation waste containing detergent

    Energy Technology Data Exchange (ETDEWEB)

    Kundari, Noor Anis, E-mail: nooranis@batan.go.id; Putra, Sugili; Mukaromah, Umi [Sekolah Tinggi Teknologi Nuklir – Badan Tenaga Nuklir Nasional Jl. Babarsari P.O. BOX 6101 YKBB Yogyakarta 55281 Telp : (0274) 48085, 489716, Fax : (0274) 489715 (Indonesia)

    2015-12-29

    Research of biochemical process of low level radioactive liquid waste containing detergent has been done. Thse organic liquid wastes are generated in nuclear facilities such as from laundry. The wastes that are cotegorized as hazard and poison materials are also radioactive. It must be treated properly by detoxification of the hazard and decontamination of the radionuclides to ensure that the disposal of the waste meets the requirement of standard quality of water. This research was intended to determine decontamination factor and separation efficiensies, its kinetics law, and to produce a supernatant that ensured the environmental quality standard. The radioactive element in the waste was thorium with activity of 5.10{sup −5} Ci/m{sup 3}. The radioactive liquid waste which were generated in simulation plant contains detergents that was further processed by aerobic biochemical process using SGB 103 bacteria in a batch reactor equipped with aerators. Two different concentration of samples were processed and analyzed for 212 hours and 183 hours respectively at a room temperature. The product of this process is a liquid phase called as supernatant and solid phase material called sludge. The chemical oxygen demand (COD), biological oxygen demand (BOD), suspended solid (SS), and its alpha activity were analyzed. The results show that the decontamination factor and the separation efficiency of the lower concentration samples are higher compared to the samples with high concentration. Regarding the decontamination factor, the result for 212 hours processing of waste with detergent concentration of 1.496 g/L was 3.496 times, whereas at the detergent concentration of 0.748 g/L was 15.305 times for 183 hours processing. In case of the separation efficiency, the results for both samples were 71.396% and 93.465% respectively. The Bacterial growth kinetics equation follow Monod’s model and the decreasing of COD and BOD were first order with the rate constant of 0

  15. Biochemical process of low level radioactive liquid simulation waste containing detergent

    Science.gov (United States)

    Kundari, Noor Anis; Putra, Sugili; Mukaromah, Umi

    2015-12-01

    Research of biochemical process of low level radioactive liquid waste containing detergent has been done. Thse organic liquid wastes are generated in nuclear facilities such as from laundry. The wastes that are cotegorized as hazard and poison materials are also radioactive. It must be treated properly by detoxification of the hazard and decontamination of the radionuclides to ensure that the disposal of the waste meets the requirement of standard quality of water. This research was intended to determine decontamination factor and separation efficiensies, its kinetics law, and to produce a supernatant that ensured the environmental quality standard. The radioactive element in the waste was thorium with activity of 5.10-5 Ci/m3. The radioactive liquid waste which were generated in simulation plant contains detergents that was further processed by aerobic biochemical process using SGB 103 bacteria in a batch reactor equipped with aerators. Two different concentration of samples were processed and analyzed for 212 hours and 183 hours respectively at a room temperature. The product of this process is a liquid phase called as supernatant and solid phase material called sludge. The chemical oxygen demand (COD), biological oxygen demand (BOD), suspended solid (SS), and its alpha activity were analyzed. The results show that the decontamination factor and the separation efficiency of the lower concentration samples are higher compared to the samples with high concentration. Regarding the decontamination factor, the result for 212 hours processing of waste with detergent concentration of 1.496 g/L was 3.496 times, whereas at the detergent concentration of 0.748 g/L was 15.305 times for 183 hours processing. In case of the separation efficiency, the results for both samples were 71.396% and 93.465% respectively. The Bacterial growth kinetics equation follow Monod's model and the decreasing of COD and BOD were first order with the rate constant of 0.01 hour-1.

  16. Invisible detergents for structure determination of membrane proteins by small-angle neutron scattering

    DEFF Research Database (Denmark)

    Midtgaard, Søren Roi; Darwish, Tamim A.; Pedersen, Martin Cramer

    2018-01-01

    A novel and generally applicable method for determining structures of membrane proteins in solution via small-angle neutron scattering (SANS) is presented. Common detergents for solubilizing membrane proteins were synthesized in isotope-substituted versions for utilizing the intrinsic neutron sca...... solution structure determination of membrane proteins by SANS and subsequent data analysis available to non-specialists. This article is protected by copyright. All rights reserved....

  17. Stabilization of functional recombinant cannabinoid receptor CB(2 in detergent micelles and lipid bilayers.

    Directory of Open Access Journals (Sweden)

    Krishna Vukoti

    Full Text Available Elucidation of the molecular mechanisms of activation of G protein-coupled receptors (GPCRs is among the most challenging tasks for modern membrane biology. For studies by high resolution analytical methods, these integral membrane receptors have to be expressed in large quantities, solubilized from cell membranes and purified in detergent micelles, which may result in a severe destabilization and a loss of function. Here, we report insights into differential effects of detergents, lipids and cannabinoid ligands on stability of the recombinant cannabinoid receptor CB(2, and provide guidelines for preparation and handling of the fully functional receptor suitable for a wide array of downstream applications. While we previously described the expression in Escherichia coli, purification and liposome-reconstitution of multi-milligram quantities of CB(2, here we report an efficient stabilization of the recombinant receptor in micelles - crucial for functional and structural characterization. The effects of detergents, lipids and specific ligands on structural stability of CB(2 were assessed by studying activation of G proteins by the purified receptor reconstituted into liposomes. Functional structure of the ligand binding pocket of the receptor was confirmed by binding of (2H-labeled ligand measured by solid-state NMR. We demonstrate that a concerted action of an anionic cholesterol derivative, cholesteryl hemisuccinate (CHS and high affinity cannabinoid ligands CP-55,940 or SR-144,528 are required for efficient stabilization of the functional fold of CB(2 in dodecyl maltoside (DDM/CHAPS detergent solutions. Similar to CHS, the negatively charged phospholipids with the serine headgroup (PS exerted significant stabilizing effects in micelles while uncharged phospholipids were not effective. The purified CB(2 reconstituted into lipid bilayers retained functionality for up to several weeks enabling high resolution structural studies of this GPCR at

  18. Detergent-Resistant Membrane Microdomains Facilitate Ib Oligomer Formation and Biological Activity of Clostridium perfringens Iota-Toxin

    National Research Council Canada - National Science Library

    Hale, Martha

    2004-01-01

    ...) were extracted with cold Triton X-100. Western blotting revealed that Ib oligomers localized in DRMs extracted from Vero, but not MRC-5, cells while monomeric Ib was detected in the detergent-soluble fractions of both cell types...

  19. Formulation studies on stability of solid-state proteases for detergent applications

    DEFF Research Database (Denmark)

    Ay, Suzan Biran; Jensen, Anker Degn; Kiil, Søren

    2012-01-01

    Enzymes are one of the most important components in the laundry detergents. They effectively contribute to the washing process by decreasing energy and water consumption, reducing environmental load of detergent products, leaving non-toxic water effluents and providing fabric care. Ensuring prope...... the antioxidant homogeneously with the enzyme was found to provide a better protection than coating the salt as a separate layer due to crack formation and/or deliquescence of Na2S2O3 at high humidity.......-dried detergent protease, Savinase, were determined in a newly developed experimental setup, providing rapid assessment of solid-state enzyme stability under oxidizing conditions. The method was based on exposure of an enzyme column to known concentrations of H2O2 (g) and humidity in a thermally stabilized...... that, the inactivation was caused by single-oxidation of the enzyme at Met222 residue. Formulation studies revealed that, having an anti-oxidative property,Na2S2O3 had a better activity-preservation effect compared to Na2CO3, retaining 80% and 60% residual activity, respectively. In addition, mixing...

  20. Use of domestic detergents in the California mastitis test for high somatic cell counts in milk.

    Science.gov (United States)

    Leach, K A; Green, M J; Breen, J E; Huxley, J N; Macaulay, R; Newton, H T; Bradley, A J

    2008-11-08

    The California mastitis test (CMT) is used on farms to identify subclinical mastitis by an indirect estimation of the somatic cell count (SCC) in milk. Four commercially available detergents were compared with a bespoke cmt fluid for their ability to detect milk samples with a scc above 200,000 cells/ml; differences between the interpretation of the results of the tests by eight operators were also investigated. The sensitivity and specificity of the test were affected by the type of detergent, and by the operators' interpretations. When used by the most sensitive operator, suitably diluted Fairy Liquid performed almost identically to cmt fluid in identifying milk samples with more than 200,000 cells/ml. The average sensitivities achieved by the eight operators for detecting this threshold were 82 per cent for Fairy Liquid and 84 per cent for cmt fluid, and the specificities were 93 and 91 per cent respectively. The other detergents contained less anionic surfactants and were less sensitive but similarly specific.